Deliverable 3.3.2 Specification of tests and test groups

DEFF Research Database (Denmark)

Peterson, Carrie Beth; Mitseva, Anelia; Harpur, Jill

2009-01-01

Deliverable 3.3.2: Specification of tests and test groups One of the main goals of the ISISEMD project is to offer innovative ICT services to improve the quality of life of elderly persons with cognitive problems or mild dementia and their informal and formal caregivers who provide every day care...... for them. This will be done via integrating intelligent scalable ICT services which will be tested for a period of 12 months under realistic conditions. Offering the services could not be complete without evaluating quality of life improvement, user acceptance and user satisfaction with a representative...... group of the target user groups. This document is devoted to describing important aspects of services evaluation such as: who the test participants will be, inclusion and exclusion criterion, selection standards, how the test participants will be recruited, ethical considerations, etc. Test methodology...

QUEST2: Release 1: Project plan deliverable set

International Nuclear Information System (INIS)

Braaten, F.D.

1995-01-01

This Project Management Plan combines the project management deliverables from the P+ methodology which are applicable to Release 1 of the QUEST2 work. This consolidation reflects discussions with WHC QA regarding an appropriate method for ensuring that P+ deliverables fulfill the intent of WHC-CM-3-10 and QR-19

Policy drivers of land use/landscape change and the role of institutions

DEFF Research Database (Denmark)

Frederiksen, Pia; Vesterager, Jens Peter

2013-01-01

This Volante deliverable D2.2 provides an overview and comparative analysis of the transposition and implementation of the two European policies: the Habitats Directive (HD) and the agri-environmental schemes (AES) under the second pillar of the common agricultural policy (CAP), and the role...... that institutions play in these processes. The report is based on the country reports from the case study countries (Netherlands (NL), Greece (GR), Romania (RO), Austria (AT) and Denmark (DK)). Each policy is analysed in separate parts of the deliverable and the results are compared in the common discussion...

Configurable 3D rotational X-ray reconstruction

NARCIS (Netherlands)

Nguyen, Xuan Huy

2012-01-01

This report is one of the deliverables of the project "Configurable 3D Rotational X-ray Reconstruction", carried out by the author as the final part of the Professional Doctorate in Engineering (PDEng) degree program in Software Technology provided by Eindhoven University of Technology and Stan

Monitoring framework and description of indicators. Deliverable D5.1

NARCIS (Netherlands)

Holtzer, A.C.G.; Giessen, A.M. van der; Munck, S.G.E. de; Poel, M.A.; Smets, R.C.J.

2012-01-01

This deliverable describes the monitoring framework that will be used to monitor and evaluate the GEN6 project and its nine pilots. The main topics are IPv6 uptake and governance, as described by the EC. Monitoring and evaluation will be done during the course of the project. This report describes

Bioclim deliverable D8a: development of the rule-based down-scaling methodology for BIOCLIM Work-package 3

International Nuclear Information System (INIS)

2003-01-01

The BIOCLIM project on modelling sequential Biosphere systems under Climate change for radioactive waste disposal is part of the EURATOM fifth European framework programme. The project was launched in October 2000 for a three-year period. The project aims at providing a scientific basis and practical methodology for assessing the possible long term impacts on the safety of radioactive waste repositories in deep formations due to climate and environmental change. Five work packages (WP) have been identified to fulfill the project objectives. One of the tasks of BIOCLIM WP3 was to develop a rule-based approach for down-scaling from the MoBidiC model of intermediate complexity in order to provide consistent estimates of monthly temperature and precipitation for the specific regions of interest to BIOCLIM (Central Spain, Central England and Northeast France, together with Germany and the Czech Republic). A statistical down-scaling methodology has been developed by Philippe Marbaix of CEA/LSCE for use with the second climate model of intermediate complexity used in BIOCLIM - CLIMBER-GREMLINS. The rule-based methodology assigns climate states or classes to a point on the time continuum of a region according to a combination of simple threshold values which can be determined from the coarse scale climate model. Once climate states or classes have been defined, monthly temperature and precipitation climatologies are constructed using analogue stations identified from a data base of present-day climate observations. The most appropriate climate classification for BIOCLIM purposes is the Koeppen/Trewartha scheme. This scheme has the advantage of being empirical, but only requires monthly averages of temperature and precipitation as input variables. Section 2 of this deliverable (D8a) outline how each of the eight methodological steps have been undertaken for each of the three main BIOCLIM study regions (Central England, Northeast France and Central Spain) using Mo

Road Safety Data, Collection, Transfer and Analysis DaCoTa. Deliverable 1.2: Road safety management investigation model and questionnaire.

NARCIS (Netherlands)

Dupont, H. Martensen, H. Papadimitriou, E. Yannis, G. Muhlrad, N. Jähi, H. Vallet, G. Giustiniani, G. Tripodi, A. Usami, D. Bax, C. Wijnen, W. Schöne, M.-L. Machata, K. Buttler, I. Zysinska, M. Talbot, R. Gitelman, V. & Hakkert, S. & Muhlrad, N. Gitelman, V. & Buttler, I. (Eds.)

2012-01-01

The aim of the DaCoTA Work Package 1 is to investigate road safety policy-making and management processes in Europe. In the Deliverables released previously, the Work Package 1 assessed the experts’ needs in terms of road safety knowledge, data and decision support tools (Deliverable 1.1/4.1), as

Test results evaluation: Pilot evaluations Deliverable no D6.5. Final draft

NARCIS (Netherlands)

Hoedemaeker, D.M.; Dangelmaier, M.; Gelau, C.; Mattes, S.; Montanari, R.

2003-01-01

This deliverable describes the User Centred Design approach that has been adopted within the COMUNICAR project. In this design approach several iterative steps were taken to design and evaluate the multimedia Human Machine Interface that is able to manage all the information exchanges between the

Opening the SMS platform to users : Deliverable D7.2 - RISIS project

NARCIS (Netherlands)

van den Besselaar, P.A.A.; Khalili, A.; de Graaf, K.A.; Idrissou, O.A.K.; van Harmelen, Frank

2017-01-01

In this deliverable we describe the SMS (Semantically Mapping Science) data integration platform (http://sms.risis.eu), the technical core within the RISIS data infrastructure for Science, Technology and Innovation Studies (STI). The aim of the platform is to produce richer data to be used in social

Deliverable 2.1

DEFF Research Database (Denmark)

Nunez, Heilyn Camacho; Jonasen, Tanja Svarre; Skov, Mette

2016-01-01

This deliverable describes in detail the problem based learning (PBL) approach and its potential for open data education. The first section provides a theoretical description of PBL with the purpose of offering a platform for the design of open data learning activities. Section two describes the ...... the current practice of open data training within the ODEdu partners along with international initiatives. The last section provides pedagogical recommendations for the process of designing the open data courses and online platform aimed at in WP3....

Natural Gas Deliverability Task Force report: A joint FERC/DOE project

International Nuclear Information System (INIS)

1992-09-01

The purpose of the FERC/DOE Natural Gas Deliverability Task Force Report was threefold: (1) to review current deliverability data for utility, accuracy, and timeliness; (2) to identify mechanisms for closing significant gaps in information resulting from changing market structures; and (3) to ensure that technologies are available to meet the needs of the emerging, competitive natural gas industry

Towards transparent, proportionate and deliverable regulation for geological disposal

International Nuclear Information System (INIS)

2010-01-01

As part of its activities, the Regulators' Forum of the NEA Radioactive Waste Management Committee has been examining the regulatory criteria for the long-term performance of geological disposal. In this context, it organised a workshop entitled 'Towards Transparent, Proportionate and Deliverable Regulation for Geological Disposal', which served to verify current status and needs. Participants included regulators, implementers, policy makers, R and D specialists and academics. Themes addressed included duties to future generations, timescales for regulation, stepwise decision making, roles of optimisation and best available techniques (BAT), multiple lines of reasoning, safety and performance indicators, recognition of uncertainties and the importance of stakeholder interactions. The workshop highlighted the significant amount of work accomplished over the past decade, but also identified important differences between national regulations even if these are not in contradiction with international guidance. Also highlighted was the importance of R and D carried out on behalf of the regulator. In addition to the contributed papers, these proceedings trace the numerous discussions that formed an integral part of the workshop. They constitute an important and unique documentary basis for researchers and radioactive waste management specialists

20 CFR 638.812 - State and local taxation of Job Corps deliverers.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false State and local taxation of Job Corps deliverers. 638.812 Section 638.812 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... § 638.812 State and local taxation of Job Corps deliverers. The Act provides that transactions conducted...

Project Turnover Deliverables for the SY Farm Enraf Annulus Leak Detectors

International Nuclear Information System (INIS)

SCAIEF, C.C.

2000-01-01

This document identifies the deliverables that ensure the end user of the SY Farm Enraf Annulus Leak Detectors (ALD) has all the documentation and training required for operating and maintaining the new system. All deliverable items checked on the Acceptance For Beneficial Use (ABU) form have been completed and are available to the end user. This document was written as required by HNF-IP-0842, Volume IV section 3.12 Acceptance of Structures, Systems, and Components for Beneficial Use. This document applies to the deliverable documentation required to operate and maintain the SY Farm Enraf ALD System. Appendix A provides a copy of the ABU form as listed in the appendix of TWR-4092, Engineering Task Plan for the New SY Farm Annulus Leak Detectors. This document attests that all required deliverable items checked on the ABU have been completed and are available to the end user

Policy support for large scale demonstration projects for hydrogen use in transport. Deliverable D 5.1 (Part B)

International Nuclear Information System (INIS)

Ros, M.E.; Jeeninga, H.; Godfroij, P.

2007-06-01

This research addresses the possible policy support mechanisms for hydrogen use in transport to answer the question which policy support mechanism potentially is most effective to stimulate hydrogen in transport and especially for large scale demonstrations. This is done by investigating two approaches. First, the possible policy support mechanisms for energy innovations. Second, by relating these to the different technology development stages (R and D, early market and mass market stage) and reviewing their effect on different parts of the hydrogen energy chain (production, distribution and end-use). Additionally, a comparison of the currently policy support mechanisms used in Europe (on EU level) with the United States (National and State level) is made. The analysis shows that in principle various policy support mechanisms can be used to stimulate hydrogen. The choice for a policy support mechanism should depend on the need to reduce the investment cost (euros/MW), production/use cost (euros/GJ) or increase performance (euros/kg CO2 avoided) of a technology during its development. Careful thought has to be put into the design and choice of a policy support mechanism because it can have effects on other parts of the hydrogen energy chain, mostly how hydrogen is produced. The effectiveness of a policy support mechanism greatly depends on the ability to adapt to the developments of the technology and the changing requirements which come with technological progress. In time different policy support mechanisms have to be applied. For demonstration projects there is currently the tendency to apply R and D subsidies in Europe, while the United States applies a variety of policy support mechanisms. The United States not only has higher and more support for demonstration projects but also has stronger incentives to prepare early market demand (for instance requiring public procurement and sales obligations). In order to re-establish the level playing field, Europe may

Evaluation, testing and application of participatory approaches in the Czech Republic. Guidelines on approaches to siting a deep repository. Deliverable D21

International Nuclear Information System (INIS)

Vojtechova, Hana

2009-10-01

Based on the review of experiences in SEA and EIA in the Czech Republic summarized in Deliverable No.3 and the testing of novel participatory and dialogue approaches summarized in Deliverables No.7, 11 and 12 in this report a model for the siting process specifically in the Czech Republic, that takes into account the need for transparency and interaction with the public, within the framework of legal requirements is outlined. Lessons learnt are summarised and a road map specified. The guidelines / recommendations in this report are proposed based on mapping the situation in the Czech Republic and experience gained in connection with the testing and application of novel participatory approaches and dialogue, but many of them are of general validity and can be applied in other countries outside the Czech Republic. This reports links directly to Work package 6, where general guidelines for participation and transparency, reflecting institutional and cultural differences, are given - Deliverable No.22

How the NDA Provides Transparency and Visibility of the Technical Deliverability of the R and D Programme - 13303

International Nuclear Information System (INIS)

Seed, Ian; James, Paula; Brownridge, Melanie; McMinn, Mervin

2013-01-01

The Nuclear Decommissioning Authority (NDA) was created under the UK Energy Act 2004 to ensure the UK historic civil public sector nuclear legacy sites are decommissioned safely, securely, cost effectively and in ways that protect the environment. The delivery will involve carrying out many unique projects within a high hazard environment requiring the very highest standards in safety, security and environmental management. Unique problems require unique solutions and there is a substantial amount of research and development required for each project. The NDA's R and D strategic objective is to ensure that delivery of the NDA's mission is technically underpinned by sufficient and appropriate research and development. This drives a requirement to provide transparency and visibility of the technical deliverability of the programme through the technical baseline and accompanying research and development requirements. The NDA need to have confidence in the technical deliverability of the Site License Companies (SLCs) plans, provide overall visibility of R and D across the NDA Estate and ensure that appropriate R and D is being carried out in a timely manner. They need to identify where coordinated R and D programmes may be advantageous as a result of common needs, risks and opportunities and ensure key R and D needs across NDA are identified, prioritised and work programmes are costed and scheduled in the Lifetime Plans for individual sites and SLCs. Evidence of the Site License Company's approach and their corresponding technical underpinning programmes is achieved through submission of a number of outputs collectively known as TBuRDs (Technical Baseline and Underpinning Research and Development Requirements). This paper is a summary of the information generated by an independent review of those TBuRDs. It highlights some of the key messages, synergies and common R and D activities across the estate. It demonstrates the value of a consistent approach to collecting R

Bioclim Deliverable D7: continuous climate evolution scenarios over western Europe (1000 km scale)

International Nuclear Information System (INIS)

2003-01-01

The overall aim of BIOCLIM is to assess the possible long term impacts due to climate change on the safety of radioactive waste repositories in deep formations. This aim is addressed through the following specific objectives: - Development of practical and innovative strategies for representing sequential climatic changes to the geosphere-biosphere system for existing sites over central Europe, addressing the timescale of one million years, which is relevant to the geological disposal of radioactive waste. - Exploration and evaluation of the potential effects of climate change on the nature of the biosphere systems used to assess the environmental impact. - Dissemination of information on the new methodologies and the results obtained from the project among the international waste management community for use in performance assessments of potential or planned radioactive waste repositories. A key point of the project is therefore to develop strategies for representing sequential long-term climatic changes by addressing time scales of relevance to geological disposal of solid radioactive wastes. The integrated strategy, which first step is described in this deliverable (D7), consists of building an integrated, dynamic climate model, to represent all the known important mechanisms for long term climatic variations. The time-dependent results will then be interpreted in terms of regional climate using rule-based and statistical down-scaling approaches. Therefore, the continuous simulation of the climate evolution of the next 200 000 years selected for study is a major objective of the BIOCLIM project. This requires models that account for the simultaneous evolution of the atmosphere, biosphere, land-ice and the ocean. To be able to perform several 200 000-yearlong transient climate simulations, the models have to include all these components, but also need to be simple enough to run fast. Therefore, climate models of intermediate complexity have been chosen to

Deliverable 1.2.7: Cross-cultural benefit segmentation of consumers

NARCIS (Netherlands)

Reinders, M.J.; Onwezen, M.C.; Sijtsema, S.J.; Zimmermann, K.L.; Berg, van den I.; Jasiulewicz, A.; Guardia, M.D.; Guerrero, L.

2010-01-01

The present report, deliverable D.1.2.7, gives a final view of the work done in ISAFruit Work Package (WP) 1.2. Average Europe fruit consumption is below the recommended level and moreover the consumption level is still decreasing in Europe. A large survey was carried out in four European countries

Modeling & Simulation Education for the Acquisition and T&E Workforce: FY07 Deliverable Package

National Research Council Canada - National Science Library

Olwell, David H; Johnson, Jean; Few, Stephanie; Didoszak, Jarema M

2007-01-01

This technical report presents the deliverables for calendar year 2007 for the "Educating the Modeling and Simulation Workforce" project performed for the DoD Modeling and Simulation Steering Committee...

D.3.3 PLOT Persuasive Learning Design Framework

DEFF Research Database (Denmark)

Gram-Hansen, Sandra Burri

2012-01-01

In this third and final deliverable of WP3: Persuasive Learning Designs, the theoretical cross field between persuasion and learning and the practical analysis of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool......, are linked together as persuasive learning designs are defined and exemplified through the four e-PLOT cases. Based on the literary study of D.3.1 as well as the subsequent discussions and reflections regarding the theoretical foundation and practical application of persuasive learning technologies......-PLOT work cases. In conclusion, the report presents a number of suggestions regarding the improvement of the two learning tools, which from a theoretical perspective will enhance the persuasive potential, and which can be taken into consideration in WP4 and 5....

OSSMETER D3.2 – Report on Source Code Activity Metrics

NARCIS (Netherlands)

J.J. Vinju (Jurgen); A. Shahi (Ashim)

2014-01-01

htmlabstractThis deliverable is part of WP3: Source Code Quality and Activity Analysis. It provides descriptions and initial prototypes of the tools that are needed for source code activity analysis. It builds upon the Deliverable 3.1 where infra-structure and a domain analysis have been

Multidimensional correlation among plan complexity, quality and deliverability parameters for volumetric-modulated arc therapy using canonical correlation analysis.

Science.gov (United States)

Shen, Lanxiao; Chen, Shan; Zhu, Xiaoyang; Han, Ce; Zheng, Xiaomin; Deng, Zhenxiang; Zhou, Yongqiang; Gong, Changfei; Xie, Congying; Jin, Xiance

2018-03-01

A multidimensional exploratory statistical method, canonical correlation analysis (CCA), was applied to evaluate the impact of complexity parameters on the plan quality and deliverability of volumetric-modulated arc therapy (VMAT) and to determine parameters in the generation of an ideal VMAT plan. Canonical correlations among complexity, quality and deliverability parameters of VMAT, as well as the contribution weights of different parameters were investigated with 71 two-arc VMAT nasopharyngeal cancer (NPC) patients, and further verified with 28 one-arc VMAT prostate cancer patients. The average MU and MU per control point (MU/CP) for two-arc VMAT plans were 702.6 ± 55.7 and 3.9 ± 0.3 versus 504.6 ± 99.2 and 5.6 ± 1.1 for one-arc VMAT plans, respectively. The individual volume-based 3D gamma passing rates of clinical target volume (γCTV) and planning target volume (γPTV) for NPC and prostate cancer patients were 85.7% ± 9.0% vs 92.6% ± 7.8%, and 88.0% ± 7.6% vs 91.2% ± 7.7%, respectively. Plan complexity parameters of NPC patients were correlated with plan quality (P = 0.047) and individual volume-based 3D gamma indices γ(IV) (P = 0.01), in which, MU/CP and segment area (SA) per control point (SA/CP) were weighted highly in correlation with γ(IV) , and SA/CP, percentage of CPs with SA plan quality with coefficients of 0.98, 0.68 and -0.99, respectively. Further verification with one-arc VMAT plans demonstrated similar results. In conclusion, MU, SA-related parameters and PTV volume were found to have strong effects on the plan quality and deliverability.

Identification of preferred dipole design options and cost estimates: Deliverable D5.2

CERN Document Server

Tommasini, Davide

2017-01-01

This document contains a description of the preferred 16 Tesla dipole magnet baseline design with its expected performances. The document also includes an analysis of the individual merits and risks of the different, initial design options and gives a justification for the selection of the baseline design. The deliverable includes expected field levels, field errors and a cost estimate, which serve as input for the arc design consolidation.

OSSMETER D3.4 – Language-Specific Source Code Quality Analysis

NARCIS (Netherlands)

J.J. Vinju (Jurgen); A. Shahi (Ashim); H.J.S. Basten (Bas)

2014-01-01

htmlabstractThis deliverable is part of WP3: Source Code Quality and Activity Analysis. It provides descriptions and prototypes of the tools that are needed for source code quality analysis in open source software projects. It builds upon the results of: • Deliverable 3.1 where infra-structure and

Deliverable 1.2.1 Market Analysis and Business Plan

DEFF Research Database (Denmark)

Peterson, Carrie Beth

2009-01-01

Deliverable 1.2.1 - Market Analysis and Business Plan The main objective of this deliverable is to provide a short overview of 4 communities involved in the pilots, envisaged type of solutions and architectures to be deployed (chapter 2) and market analysis at regional level (chapter 3......) with related business cases. The Market analysis will provide an overview of market requirements, current status and opportunities for the pilot service that will be provided in the context of ISISEMD. This will be realised by performing detailed studies on various sources. Proposals for business modelling...... and business cases (chapter 4) will rely on the concept of value chains. Value chains typically consist of several providers, which together produce a complex product or service....

Best Practice in Policy Package Design

DEFF Research Database (Denmark)

Kessler, Florian; Vesela, Jirina; Vencl, Vaclav

2010-01-01

This deliverable focuses on the identification and analysis of best practice examples of policy package design. For this purpose a methodology is developed that allows the systematic analysis of both national and EU policy packages. Eight packages were selected and analysed, highlighting...... the factors which supported the design and implementation process in each case. The results of the analysis show which factors led to these cases to be considered best practice. In addition, factors are identified which are not yet part of the generic policy packaging framework presented in earlier OPTIC...... Deliverables. The consideration of these factors will help to further improve the framework in the subsequent work packages....

SiteChar. Characterisation of European CO2 storage. Deliverable D8.1. Qualitative and quantitative social site characterisations

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Pol, M.; Paukovic, M. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany); Shackley, S.; Mabon, L. [Scottish Carbon Capture and Storage SCCS, Edinburg, Scotland (United Kingdom); Hepplewhite, F.; Loveridge, R. [Energy Markets Unit, Scottish Government, Edinburg, Scotland (United Kingdom); Mazurowski, M.; Polak-Osiniak, D. [Polish Oil and Gas Company PGNiG, Warszawa (Poland); Rybicki, C. [AGH University of Science and Technology, Krakow (Poland)

2012-10-15

At local level, public support has proven crucial to the implementation of CO2 capture and storage (CCS) demonstration projects. Whereas no method exists to guarantee public acceptability of any project, a constructive stakeholder engagement process does increase the likelihood thereof. Social site characterisation can be used as an instrument to explore, plan and evaluate a process of active and constructive local stakeholder engagement in a prospective CCS project as a parallel activity to technical site characterisation. It roughly consists of a formative research phase to get acquainted with the area followed by a series of public information and engagement activities. This deliverable presents results from the first phase for the social site characterisations of a prospective CCS site in Poland (onshore) and the UK (offshore), using qualitative as well as quantitative research methods, as a first step to planning of local public engagement activities and evaluation of these activities that will be undertaken by this consortium at both sites in the near future. Although the term social site characterisation actually refers to the entire process of formative research and subsequent public outreach, and hence to the complete package of awareness work undertaken as part of SiteChar, in the present deliverable the term only refers to the formative research activities as undertaken up to now and as described in this deliverable. The qualitative part of the social site characterisation consisted of (1) a description of relevant social site characteristics such as local history; (2) interviews with relevant local stakeholders; (3) a media analysis of local newspapers. The quantitative part of the social site characterisation consisted of surveys using representative samples to characterise the local population in terms of awareness, knowledge and perceptions of CCS, felt involvement in decision making, extent of local activism, level of trust in representatives and

Record of principal work activities/deliverables

International Nuclear Information System (INIS)

1989-09-01

Over the five year period of performance, thirteen task assignments were issued by the DOE to ARINC Research. During the two year base period seven tasks were assigned. Two task assignments were issued for each of the three consecutive one year option periods. Associated with all task assignments were multiple subtasks, some of which required significant effort. These subtasks are appropriately cited in this report under their respective task assignments as principal work activities or deliverables. The technical and management support provided to the DOE under this contract focused on two general areas: (1) appraisal activities and (2) non-appraisal activities. Support to appraisals included planning, document review, developing lines-of-inquiry, interviewing, data collection, report writing, and follow-up. Such work was executed both on-site at the DOE facility under review and off-site. Non-appraisal support was varied and included such areas as document review, data base development, technical assessments. statistical analysis, policy analysis, reliability engineering, and workshop and conference planning and execution

Bioclim Deliverable D3: global climatic features over the next million years and recommendation for specific situations to be considered

International Nuclear Information System (INIS)

2001-01-01

The BIOCLIM project aims at assessing the possible long-term impacts of climate change on the safety of waste repositories in deep formations using climate simulations of the long-term climate in various European areas. One of the objectives of the project is to develop two strategies for representing sequential climatic changes to the geosphere-biosphere system for different sites over Europe, addressing the time scale of one million years. The results of this work will be interpreted in terms of global or regional changes of climate and of vegetation. The first strategy (hierarchical strategy) will use the full hierarchy of existing climate models (a climate model is a numerical simplified representation of the climate system behaviour and evolution). Simple models (LLN 2-D NH and threshold models; see the description here after) will simulate the overall long-term evolution of the global climate. Their results will then be used as inputs to more complex models (LMD climate models possibly coupled with vegetation models, either SECHIBA or ORCHIDE) and finally climate and vegetation cover will be determined for specific sites at specific times. A second strategy (integrated strategy) will consist in building an integrated climate model, which represents most of the physical mechanisms for studying long-term climatic variations. The results will then be interpreted on a regional scale. This deliverable is the first step of the hierarchical strategy. The purpose of this deliverable is to identify and justify some specific climatic situations amongst different long-term simulations that are of interest for assessing the safety of radioactive waste repository sites and that will be further studied with GCMs (General Circulation Model). The simple threshold (or multi-state) climate model is a modified version of the model from Paillard. It describes the time evolution of the ice volume and the CO 2 concentration. It has two distinct regimes (interglacial and glacial

48 CFR 207.171-3 - Policy.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Policy. 207.171-3 Section... DEFENSE ACQUISITION PLANNING ACQUISITION PLANNING Acquisition Plans 207.171-3 Policy. DoD policy is to... it is anticipated that a prime contract will be awarded without adequate price competition, and the...

20 CFR 638.300 - Eligibility for funds and eligible deliverers.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Eligibility for funds and eligible deliverers. 638.300 Section 638.300 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Funding, Site Selection...

Short-term Canadian natural gas deliverability 2005-2007 : an energy market assessment

International Nuclear Information System (INIS)

2005-10-01

This document examined the factors that influence gas supply in the short-term and presented an outlook for deliverability from 2005 to 2007. Recent trends in the production characteristics of the Western Canada Sedimentary Basin (WCSB) and the east coast offshore provide a better understanding of the short-term gas supply situation. High natural gas prices have resulted in record levels of drilling in Canada's natural gas exploration and production industry. Drilling levels are expected to remain high as industry will continue to maximize efforts to increase production. However, due to the maturity of the WCSB, the effort will result in only a modest increase in production over the next 2 years. The low decline characteristics of natural gas from coal (NGC) wells will have a stabilizing effect on WCSB deliverability over the long-term. It was noted that approximately 98 per cent of Canadian gas is produced from the WCSB with Alberta accounting for 80 per cent of the output. This assessment provided separate deliverability estimates for conventional gas in the WCSB, NGC, and offshore Nova Scotia. The contribution from offshore Nova Scotia will likely remain in the range of 10 to 11 million cubic metres per day until late 2006, and rise to an average of 13 million cubic metres per day in 2007 with added compression. It was concluded that Canadian deliverability will increase slightly through an increase in drilling activity. It was also noted that the province of Alberta and the petroleum industry are addressing the issue of drilling density, access to resources, noise and other environmental aspects of the expected increase in NGC activity. 3 tabs., 16 figs., 3 appendices

Night Wind - Deliverable D.3.2 main simulation report; Grid architecture for wind power production with energy storage through load shifting in refrigerated warehouses

Energy Technology Data Exchange (ETDEWEB)

Cronin, Tom; Bindner, Henrik; Zong, Yi

2008-11-15

This report represents Deliverable D.3.2 of Work Package 3 in the Night Wind project. The aim of this Work Package was to simulate a cold store (or number of cold stores) within a power system where there is a high degree of wind power penetration. The Night Wind Control System, developed as part of Work Package 5, was to be integrated into the simulations so that the wind power could be 'stored' in the cold store with maximum benefit to the electrical network, utility or cold store owner. To this end, the following have been accomplished: 1) The Night Wind concept has been described in terms of demand side management. 2) Input requirements and data have been specified and collected. Measured data from the existing cold store facility of Partner Logistics has been analysed. 3) Component models for the simulations (including the cold store model itself) have been developed for the simulation platform, IPSYS. 4) The Night Wind Control System (NWCS) from Work Package 5 has been developed so that it finishes computations within two minutes. 5) Controllers including the NWCS) have been operated with the cold store model within IPSYS. 6) Simulations have been performed with the cold store model and an increasing penetration of wind power. This report presents the results of the work undertaken in Work Package 3 which would have benefited from the additional time requested at the project meeting in March 2008, however, this extension of time was not granted. Nevertheless, the work that was possible is considered significantly complete, although it is acknowledged that there has been a delay in the presentation of this report. It should be noted that it was not possible to address the new aspects of Task 3.7 'Verification of simulation results' as there was no implementation of the night wind concept at the demonstration site (Task 7). Verification of the simulation of the present system has, naturally, been carried out and described in this report. (ln)

Conclusions and summaries of feed-back comments from participating countries. Deliverable D18

International Nuclear Information System (INIS)

Drottz Sjoeberg, Britt-Marie; Richardson, Phil; Pritrsky, Jozef

2009-12-01

Deliverable 18 is focused on the principal components of risk communication strategies and based on actual experiences from different cultural settings in relation to nuclear waste management (NWM) issues. Essentially it describes how the ideas were presented and developed within the 3rd year of the ARGONA project, in sub-workpackage 4.1. The intention of this work was to delineate good risk communication approaches across national borders, as well as to specify the circumstances that require more specific and unique national or group considerations. Our aim was to provide an in-depth analysis of societal patterns and trends regarding the management of nuclear wastes on the basis of a number of individual participants' understanding and open discussion of the issue between themselves and across the heterogeneous groups represented. To meet these goals we involved a number of stakeholders from ARGONA participating countries (UK, Sweden, Slovakia, Czech Republic) in a one-day focus group in September 2009. Their task was to provide comments on the strategies for risk communication that have emanated from the various interest groups within the different countries. Another reason for their engagement was to elicit their comments on the central features of existing materials and thus point to any strengths and weaknesses associated with various risk communication techniques and more composite risk communication strategies. The results obtained reflect the opinions and sentiments related to risks and safety of various groups in civil society within the participating countries. We also believe that the work performed in D18 fits well into the transparency framework provided in the RISCOM model. This model was successfully used in Sweden and has actually also been applied in the Czech Republic within the ARGONA project. It was shown that if applied in practice this model has a high potential for improving transparency related to consensus building in the NWM area

OPTIMISE - Deliverable D7.3

DEFF Research Database (Denmark)

Eriksen, Morten

This report describes the final conclusion on rolling, pressing and filament geometry. The most of the work has previous been described and present in the work package reports that has been made during the project and presented at the 6 months meeting. This report is built up in such a way......, that the main investigations and conclusions on rolling, pressing and filament geometry will be presented in separate parts. In the end of this reports the main recommendations for the mechanical processing will be given....

Evolution and development of a deliverability improvement program for gas storage

International Nuclear Information System (INIS)

Maddox, T.D.; Sikorski, D.L.

1994-01-01

With the implementation in November 1993 of FERC Order 636, the responsibilities and contractual obligations for a Gas Transmission Company operating Gas Storage have changed. Among these responsibilities is the ability to deliver gas from storage in a timely manner as specified by gas storage contracts. To ensure that their deliverability obligations are met, a program has been implemented to review well performance and to re-work wells where deliverability can economically be improved. This program is aimed at maintaining or improving deliverability from wells and monitoring their future performance. Re-working existing wells has proven to be an economically successful method of maintaining deliverability compared to drilling new wells to meet this purpose. Re-working can be broken into two groups of wells: wells that have mechanical problems that need to be corrected or wells that need some type of stimulation treatment. In developing a rework program, several things need to be addressed such as: a candidate recognition program, the design of the work to be performed, execution of that work, and the evaluation of the results obtained along with the economics. The Deliverability Improvement Program is in its third year. It has developed from a small pilot program to a substantial part of normal storage activities. The purpose of this paper is to review the processes used to find candidates to work on and an evaluation of work performed

Fluctuations and predictability of wind and hydropower. Deliverable 2.1

DEFF Research Database (Denmark)

Giebel, Gregor; Holttinen, H.; Söder, L.

2004-01-01

The report forms the deliverable D2.1 of the EU supported project Wind Power Integration in a Liberalised Electricity Market (WILMAR). The handling and generation of the necessary wind and hydro time series for the project’s power system planningsimulation model is described. The wind power...... and the hydro power time series on hourly basis are generated on basis of real data for all the geographical regions included in the analysis in order to realistically represent the various correlations intime and displacement. Models have been developed to generate various realistic future time series based...

Virtual Enterprise Reference Architecture and Methodology (VERAM), Joint D41/D43 deliverable of GLOBEMEN

DEFF Research Database (Denmark)

Tølle, Martin; Zwegers, Arian; Vesterager, Johan

2003-01-01

. IMS Globemen is an inter-regional project aiming to develop methods, tools and architectures to support inter-enterprise operations in one-of-kind industries, in different lifecycle phases. This deliverable describes an architectural framework VERAM including a description/elaboration of its elements......-of-a-kind-production”, the concept of the Virtual Enterprise (VE) and the Virtual Enterprise Reference Architecture (VERA) developed in GLOBEMEN. - In Chapter 4 a so-called life history example is presented to give a possible scenario about how an enterprise network could evolve over time, and to point out the need for preparing...... and setting up networks and VEs. The life history example in Chapter 4 highlights the potential for preparing and reusing existing knowledge related to enterprise networks and VEs. - As a means to structure relevant knowledge GLOBEMEN developed the VERAM (Virtual Enterprise Reference Architecture...

Deliverable navigation for multicriteria IMRT treatment planning by combining shared and individual apertures

International Nuclear Information System (INIS)

Fredriksson, Albin; Bokrantz, Rasmus

2013-01-01

We consider the problem of deliverable Pareto surface navigation for step-and-shoot intensity-modulated radiation therapy. This problem amounts to calculation of a collection of treatment plans with the property that convex combinations of plans are directly deliverable. Previous methods for deliverable navigation impose restrictions on the number of apertures of the individual plans, or require that all treatment plans have identical apertures. We introduce simultaneous direct step-and-shoot optimization of multiple plans subject to constraints that some of the apertures must be identical across all plans. This method generalizes previous methods for deliverable navigation to allow for treatment plans with some apertures from a collective pool and some apertures that are individual. The method can also be used as a post-processing step to previous methods for deliverable navigation in order to improve upon their plans. By applying the method to subsets of plans in the collection representing the Pareto set, we show how it can enable convergence toward the unrestricted (non-navigable) Pareto set where all apertures are individual. (paper)

SiteChar. Characterisation of European CO2 storage. Deliverable D8.2. Trust building and raising public awareness

Energy Technology Data Exchange (ETDEWEB)

Brunsting, S.; Pol, M.; Mastop, E.A. [ECN Policy Studies, Energy research Centre of the Netherlands ECN, Amsterdam (Netherlands); Kaiser, M.; Zimmer, R. [Unabhaengiges Institut fuer Umweltfragen UfU, Berlin (Germany); Shackley, S.; Mabon, L.; Howell, R. [Scottish Carbon Capture and Storage SCCS, Edinburg, Scotland (United Kingdom)

2012-08-15

At local level, public support has proven crucial to the implementation of CO2 capture and storage (CCS) demonstration projects. Whereas no method exists to guarantee public acceptability of any project, a constructive stakeholder and community engagement process does increase the likelihood thereof. This deliverable is a follow-up to deliverable D8.1 'Social site characterisation'. Social site characterisation can be used as an instrument to explore, plan and evaluate a process of active and constructive local stakeholder and citizen engagement in a prospective CCS project as a parallel activity to technical site characterisation. It serves as an analytical tool to describe the local social circumstances in the area and to design and evaluate stakeholder and community engagement efforts with the aims of building trust and raising public awareness. Using results from the social site characterisation of the area, the present deliverable focuses on the second purpose. It presents results from public engagement activities designed to raise public awareness and inform public opinion of a prospective CCS site in Poland (onshore) and the UK (offshore): focus conferences. Furthermore, by initiating an enhanced cooperation in planning of new storage sites between project developers, authorities and the local public, focus conferences aim to serve as a 'hinge' between social site characterisation as a research effort and application to real-life project settings. The focus conferences are part of a range of public engagement activities including the setup of public information websites on generic and site-specific CCS, information meetings. A second survey eventually shall evaluate the results of the public engagement activities. The aim of the focus conferences was to raise public awareness and assist public opinion forming processes of a prospective CCS site in Poland (onshore) and the UK (offshore). At the same time, it aimed to present and test a

Police Enforcement Policy and Programmes on European Roads (PEPPER). Deliverable 4a: Good practice in data, data collection and data use for monitoring and evaluating Traffic Law Enforcement.

NARCIS (Netherlands)

Schagen, I.N.L.G. Bernhoft, I.M. Erke, A. Ewert, U. Kallberg, V.-P. & Skladana, P.

2008-01-01

This report is the Deliverable of task 4.3a of the PEPPER project. It describes the good practice requirements regarding data, data collection and data use for monitoring and evaluating Traffic Law Enforcement (TLE). The aim is that, eventually, individual police forces/countries put the identified

32 CFR 142.3 - Policy.

Science.gov (United States)

2010-07-01

... copyright law of the United States, the application of that law to specific situations is a matter for interpretation by the U.S. Copyright Office and the Department of Justice. ... AND VIDEO RECORDINGS § 142.3 Policy. (a) It is DoD policy: (1) To recognize the rights to copyright...

29 CFR 1612.3 - Open meeting policy.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Open meeting policy. 1612.3 Section 1612.3 Labor... ACT REGULATIONS § 1612.3 Open meeting policy. (a) All meetings of the Commission shall be conducted in... adequate acoustics for persons in attendance at the meeting. (d) Observers may take still photographs and...

Policy making structures in the EU and participating countries. Deliverable D2

International Nuclear Information System (INIS)

Andersson, Kjell; Lidberg, Maria; Falck, Eberhard

2008-10-01

The point of departure for the ARGONA project is that participation and transparency are key elements of effective risk governance. The acronym ARGONA stands for 'Arenas for Risk Governance' and the project investigates how approaches of transparency and deliberation relate to each other and also how they relate to the political system in which decisions, for example on the final disposal of nuclear waste, are ultimately taken. The project then turns to study the role played by mediators, who facilitate public engagement with nuclear waste management issues, and the 'conduct of the conduct' of public consultations. By the latter is meant the communication of models used for deliberation and transparency. Furthermore, the project investigates how good risk communication can be organized taking cultural aspects and different arenas into account. In a central part of the project major efforts are made to test and apply approaches to transparency and participation by making explicit what it would mean to use the RISCOM model and other approaches within different cultural and organizational settings. Finally, the ARGONA partners develop guidelines for the application of novel approaches that will enhance real progress in nuclear waste management programmes. The project consists of six work packages that logically starts with a description of the policy making structures that exist within the EU and in the participating countries, including EU Directives, such as Strategic Environmental Assessment and Environmental Impact Assessment Directives, as well as national nuclear safety and environmental legislation. This work package (WP 1) forms the point of departure for the project, in determining the framework within which new arenas can be formed and within which the mediators are acting. A questionnaire was issued and sent to key organizations at national and local levels. The intention was that the work package should be focused on issues that set the scene for e.g. site

Short-term Canadian natural gas deliverability 2006-2008 : an energy market assessment

International Nuclear Information System (INIS)

2006-10-01

This report presented an assessment of the expected capability of Canadian gas production through to the year 2008. Strong natural gas prices have led to record drilling levels in Canada's natural gas industry. North American natural gas prices reached a peak near the end of 2005. The rise in prices during 2005 reflected high world crude oil prices, a tight balance between natural gas supply and demand, and disruptions to United States gas supply from 2 hurricanes. In response to rising prices, western Canada drilling activity achieved new highs in early 2006. Higher drilling rates also reflected rising costs for key inputs of steel, fuel, and labour. Gas prices have since softened due to a storage overhang resulting from a mild winter. The combination of rising costs and softening prices has impacted margins for Canadian gas producers. In response, some producers have reduced drilling expansion plans in coalbed methane (CBM) and shallow gas plays in the Western Canadian Sedimentary Basin (WCSB). Increases in deeper gas drilling have been maintained. Total gas drilling for 2006 is expected to rise by 3 per cent compared to 2005. The report projected a small increase in Canada's total annual gas production from 484 million m 3 /d in 2005 to 491 million m 3 /d in 2008. Annual average deliverability of conventional gas is expected to decline slightly over the projection period. The decrease is expected to be more than offset by growth in CBM production in western Canada, which is expected to increase from 8 million m 3 /d in 2005 to 27 million m 3 /d in 2008. 5 tabs., 5 figs

48 CFR 211.274-3 - Policy for valuation.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Policy for valuation. 211... Documents 211.274-3 Policy for valuation. (a) It is DoD policy that contractors shall be required to...'s unit acquisition cost is— (1) For fixed-price type line, subline, or exhibit line items, the unit...

D.3.2 PLOT Persuasive Learning Design Framework

DEFF Research Database (Denmark)

Gram-Hansen, Sandra Burri; Schärfe, Henrik; Winther-Nielsen, Nicolai

2011-01-01

of the technological learning tools and products which are currently related to the PLOT project, namely the GLOMaker and the 3ET tool, and a selection of GLOs and learning exercises. The primary focus of the analysis is to explore how the theoretical perspectives presented in D.3.1 are represented in these tools...... as an: ‚Internal report for project use containing an empirically-based assessment of existing systems and their potential in terms of learning and persuasion. This will be used as a discussion document by the consortium.‛ To meet the requirements of this deliverable, this documents presents analysis......, in particular the notions of persuasive design and constructive alignment. Whilst the report provides a persuasive design perspective on the technologies related to Euro PLOT, it must be stressed that if the document is to function as a basis for further discussion within the consortium, the partners...

Developing a Low-Cost System for 3d Data Acquisition

Science.gov (United States)

Kossieris, S.; Kourounioti, O.; Agrafiotis, P.; Georgopoulos, A.

2017-11-01

In this paper, a developed low-cost system is described, which aims to facilitate 3D documentation fast and reliably by acquiring the necessary data in outdoor environment for the 3D documentation of façades especially in the case of very narrow streets. In particular, it provides a viable solution for buildings up to 8-10m high and streets as narrow as 2m or even less. In cases like that, it is practically impossible or highly time-consuming to acquire images in a conventional way. This practice would lead to a huge number of images and long processing times. The developed system was tested in the narrow streets of a medieval village on the Greek island of Chios. There, in order to by-pass the problem of short taking distances, it was thought to use high definition action cameras together with a 360˚ camera, which are usually provided with very wide-angle lenses and are capable of acquiring images, of high definition, are rather cheap and, most importantly, extremely light. Results suggest that the system can perform fast 3D data acquisition adequate for deliverables of high quality.

Driver. D530.2 – Tools for the Lessons Learned Framework

NARCIS (Netherlands)

Schaik, M.G. van; et al

2016-01-01

In this deliverable D530.2 “Tools for the Lessons Learned Framework” the overall lessons learned framework will be clarified based on the delivery D53.1 “Lessons Learned Framework Concept” and aligned with the deliverable D52.1 “Harmonized competence framework”. The Tools for the Lessons Learned

Outlook for B.C. gas production and deliverability in relation to domestic and export markets

International Nuclear Information System (INIS)

Phelps, M.E.J.

1993-01-01

The business outlook for natural gas in British Columbia is discussed. Drilling activity in B.C. is increasing, and it is predicted that reserve additions over 1993-1998 will total 3.4 terra cubic feet. Deliverability in 1993 is 1.9 billion cubic feet/d, and this is expected to rise 30% by 1998. Westcoast is doubling raw gas capacity at the Pine River plant and is constructing new raw gas transmission lines. Growth is expected to continue at 6%/y for the next five years. In the deregulated environment, short term fluctuations in price are to be expected, however consumers are reluctant to tolerate price increases when levels of disposable income are static or decreasing. Regular, predictable and sustained increases in prices are preferable to sudden, significant oscillations, especially for residental customers

Short-term Canadian natural gas deliverability 2008-2010 : an energy market assessment

International Nuclear Information System (INIS)

2008-10-01

This document examined the factors that affect gas supply in the short term and presented an outlook for deliverability through 2010. Its primary purpose was to advance public understanding of the short-term gas supply situation in Canada. For the past several years, Canadian natural gas has provided about 25 per cent of combined Canadian and U.S. production. Canadian gas deliverability remained within a narrow range from 2000 to mid-2007 at around 483 million cubic metres and has since begun to decline. About 98 per cent of the Canadian volume comes from the Western Canada Sedimentary Basin (WCSB), with most of the rest coming from Atlantic Canada. Although drilling and development activity in the WCSB has depended on the price of natural gas relative to costs, that price was influenced by uncertainties such as weather-driven market demand, changes in natural gas supply, cost, attractiveness of other basins, availability of imported liquefied natural gas and possible supply disruptions in the Gulf of Mexico. Shale gas and tight gas prospects in the Horn River and Montney plays of northeast British Columbia have attracted considerable interest from Canada's upstream industry. Early stages of shale gas development are also underway in Quebec and the Maritimes. However, the viability of large scale commercial development of shale gas in Canada has yet to be proven. In order to reflect the short-term uncertainty of the North American natural gas market, this report project deliverability under 3 cases that reflect different levels of drilling investment, namely reference case, high case and low case scenarios. 4 tabs., 12 figs

Short-term Canadian natural gas deliverability 2008-2010 : an energy market assessment

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-10-15

This document examined the factors that affect gas supply in the short term and presented an outlook for deliverability through 2010. Its primary purpose was to advance public understanding of the short-term gas supply situation in Canada. For the past several years, Canadian natural gas has provided about 25 per cent of combined Canadian and U.S. production. Canadian gas deliverability remained within a narrow range from 2000 to mid-2007 at around 483 million cubic metres and has since begun to decline. About 98 per cent of the Canadian volume comes from the Western Canada Sedimentary Basin (WCSB), with most of the rest coming from Atlantic Canada. Although drilling and development activity in the WCSB has depended on the price of natural gas relative to costs, that price was influenced by uncertainties such as weather-driven market demand, changes in natural gas supply, cost, attractiveness of other basins, availability of imported liquefied natural gas and possible supply disruptions in the Gulf of Mexico. Shale gas and tight gas prospects in the Horn River and Montney plays of northeast British Columbia have attracted considerable interest from Canada's upstream industry. Early stages of shale gas development are also underway in Quebec and the Maritimes. However, the viability of large scale commercial development of shale gas in Canada has yet to be proven. In order to reflect the short-term uncertainty of the North American natural gas market, this report project deliverability under 3 cases that reflect different levels of drilling investment, namely reference case, high case and low case scenarios. 4 tabs., 12 figs.

Natural gas market assessment. Natural gas supply, western Canada: Recent developments (1982-1992), [and] short-term deliverability outlook (1993-1996)

International Nuclear Information System (INIS)

1993-11-01

A review is presented of the evolution of gas supply from western Canada over the last ten years and a short-term forecast of gas deliverability. To illustrate the changed supply conditions, selected trends and market developments are summarized, including trends in excess deliverability, changes in reserves, the regional distribution of cumulative production, the pace of tieing-in of previously discovered pools for production, the expansion in deliverability from gas storage reservoirs, and recent increases in drilling activity. On the basis of analyses and observations, it is concluded that estimated productive capacity is likely to exceed pipeline capacity on a peak-day basis by a narrow margin over 1993-96. Increasing deliverability from gas storage reservoirs located in the producing provinces is an important factor in handling peak day requirements. From time to time, high demand due to extreme weather conditions could result in pronounced tightness and price fluctuations similar to those seen in winter 1992/93. A strong economic recovery could also result in market tightness, depending on the speed and size of supply response. The growing estimates of resource potential in the western Canada sedimentary basin provide an encouraging indication of the availability of future supply. 29 figs., 3 tabs

Multivariate time series analysis of SafetyNet data. SafetyNet, Building the European Road Safety Observatory, Workpackage 7, Deliverable 7.7.

NARCIS (Netherlands)

Commandeur, J.J.F. Bijleveld, F.D. & Bergel, R.

2009-01-01

This deliverable provides an application of theories and methods documented in Deliverables 7.4 and 7.5 of work package 7 of the SafetyNet project. In this deliverable, use of select analysis techniques is demonstrated through real world road safety analysis problems, using aggregate data which may

Capacity Development and Strengthening for Energy Policy formulation and implementation of Sustainable Energy Projects in Indonesia CASINDO. Deliverable No. 27. Biogas Construction Plan in Segoroyoso Village Yogyakarta Region

Energy Technology Data Exchange (ETDEWEB)

Lesmana, Surya Budi; Putra, Sri Atmaja [Muhammadiyah University of Yogyakarta, Yogyakarta (Indonesia)

2011-10-15

The overall objective of the CASINDO programme is to establish a self-sustaining and self-developing structure at both the national and regional level to build and strengthen human capacity to enable the provinces of North Sumatra, Yogyakarta, Central Java, West Nusa Tenggara (WNT) and Papua to formulate sound policies for renewable energy and energy efficiency and to develop and implement sustainable energy projects. To achieve the CASINDO objective seven Technical Working Groups have been established with the aim to conduct the technical activities under the various work packages and to produce the agreed deliverables. This report presents results from Technical Working Group IV on Renewable Energy project development. Its main aims were: To identify suitable non-hydro RE projects that can be developed in the province; To conduct an energy needs assessment in a selected location; To develop a business plan for a proposed solution to the identified main energy problem of the target community; To identify potential investors; To construct the project.

Prospects and Challenges in the Deliverance of Executive Masters ...

African Journals Online (AJOL)

In the recent decade Executive Masters degree programmes have become very popular deliverance in the Tanzanian higher learning institutions. ... Using The Open University of Tanzania as a case study, this article will focus on two programmes, namely; Executive Masters in Business Administration (EMBA) and Masters ...

SU-F-P-64: The Impact of Plan Complexity Parameters On the Plan Quality and Deliverability of Volumetric Modulated Arc Therapy with Canonical Correlation Analysis

Energy Technology Data Exchange (ETDEWEB)

Jin, X; Yi, J; Xie, C [The 1st Affiliated Hospital of Wenzhou Medical University, Wenzhou, Zhejiang (China)

2016-06-15

Purpose: To evaluate the impact of complexity indices on the plan quality and deliverability of volumetric modulated arc therapy (VMAT), and to determine the most significant parameters in the generation of an ideal VMAT plan. Methods: A multi-dimensional exploratory statistical method, canonical correlation analysis (CCA) was adopted to study the correlations between VMAT parameters of complexity, quality and deliverability, as well as their contribution weights with 32 two-arc VMAT nasopharyngeal cancer (NPC) patients and 31 one-arc VMAT prostate cancer patients. Results: The MU per arc (MU/Arc) and MU per control point (MU/CP) of NPC were 337.8±25.2 and 3.7±0.3, respectively, which were significantly lower than those of prostate cancer patients (MU/Arc : 506.9±95.4, MU/CP : 5.6±1.1). The plan complexity indices indicated that two-arc VMAT plans were more complex than one-arc VMAT plans. Plan quality comparison confirmed that one-arc VMAT plans had a high quality than two-arc VMAT plans. CCA results implied that plan complexity parameters were highly correlated with plan quality with the first two canonical correlations of 0.96, 0.88 (both p<0.001) and significantly correlated with deliverability with the first canonical correlation of 0.79 (p<0.001), plan quality and deliverability was also correlated with the first canonical correlation of 0.71 (p=0.02). Complexity parameters of MU/CP, segment area (SA) per CP, percent of MU/CP less 3 and planning target volume (PTV) were weighted heavily in correlation with plan quality and deliveability . Similar results obtained from individual NPC and prostate CCA analysis. Conclusion: Relationship between complexity, quality, and deliverability parameters were investigated with CCA. MU, SA related parameters and PTV volume were found to have strong effect on the plan quality and deliverability. The presented correlation among different quantified parameters could be used to improve the plan quality and the efficiency

Identification of road user related risk factors, Deliverable 5.1 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Filtness, A. & Papadimitriou, E. (Eds.) Leskovšek, B. Focant, N. Martensen, H. Sgarra, V. Usami, D.S. Soteropoulos, A. Stadlbauer, S. Theofilatos, A. Yannis, G. Ziakopoulos, A. Diamandouros, K. Durso, C. Goldenbeld, C. Loenis, B. Schermers, G. Petegem, J.-H. van Elvik, R. Hesjevoll, I.S. Quigley, C. & Papazikou, E.

2017-01-01

The present Deliverable (D5.1) describes the identification and evaluation of infrastructure related risk factors. It outlines the results of Task 5.1 of WP5 of SafetyCube, which aimed to identify and evaluate infrastructure related risk factors and related road safety problems by (i) presenting a

Deliverability on the interstate natural gas pipeline system

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-05-01

Deliverability on the Interstate Natural Gas Pipeline System examines the capability of the national pipeline grid to transport natural gas to various US markets. The report quantifies the capacity levels and utilization rates of major interstate pipeline companies in 1996 and the changes since 1990, as well as changes in markets and end-use consumption patterns. It also discusses the effects of proposed capacity expansions on capacity levels. The report consists of five chapters, several appendices, and a glossary. Chapter 1 discusses some of the operational and regulatory features of the US interstate pipeline system and how they affect overall system design, system utilization, and capacity expansions. Chapter 2 looks at how the exploration, development, and production of natural gas within North America is linked to the national pipeline grid. Chapter 3 examines the capability of the interstate natural gas pipeline network to link production areas to market areas, on the basis of capacity and usage levels along 10 corridors. The chapter also examines capacity expansions that have occurred since 1990 along each corridor and the potential impact of proposed new capacity. Chapter 4 discusses the last step in the transportation chain, that is, deliverability to the ultimate end user. Flow patterns into and out of each market region are discussed, as well as the movement of natural gas between States in each region. Chapter 5 examines how shippers reserve interstate pipeline capacity in the current transportation marketplace and how pipeline companies are handling the secondary market for short-term unused capacity. Four appendices provide supporting data and additional detail on the methodology used to estimate capacity. 32 figs., 15 tabs.

TH-AB-202-03: A Novel Tool for Computing Deliverable Doses in Dynamic MLC Tracking Treatments

Energy Technology Data Exchange (ETDEWEB)

Fast, M; Kamerling, C; Menten, M; Nill, S; Oelfke, U [The Institute of Cancer Research and The Royal Marsden NHS Foundation Trust, London (United Kingdom); Crijns, S; Raaymakers, B [University Medical Center Utrecht, Utrecht (Netherlands)

2016-06-15

Purpose: In tracked dynamic multi-leaf collimator (MLC) treatments, segments are continuously adapted to the target centroid motion in beams-eye-view. On-the-fly segment adaptation, however, potentially induces dosimetric errors due to the finite MLC leaf width and non-rigid target motion. In this study, we outline a novel tool for computing the 4d dose of lung SBRT plans delivered with MLC tracking. Methods: The following automated workflow was developed: A) centroid tracking, where the initial segments are morphed to each 4dCT phase based on the beams-eye-view GTV shift (followed by a dose calculation on each phase); B) re-optimized tracking, in which all morphed initial plans from (A) are further optimised (“warm-started”) in each 4dCT phase using the initial optimisation parameters but phase-specific volume definitions. Finally, both dose sets are accumulated to the reference phase using deformable image registration. Initial plans were generated according to the RTOG-1021 guideline (54Gy, 3-Fx, equidistant 9-beam IMRT) on the peak-exhale (reference) phase of a phase-binned 4dCT. Treatment planning and delivery simulations were performed in RayStation (research v4.6) using our in-house segment-morphing algorithm, which directly links to RayStation through a native C++ interface. Results: Computing the tracking plans and 4d dose distributions via the in-house interface takes 5 and 8 minutes respectively for centroid and re-optimized tracking. For a sample lung SBRT patient with 14mm peak-to-peak motion in sup-inf direction, mainly perpendicular leaf motion (0-collimator) resulted in small dose changes for PTV-D95 (−13cGy) and GTV-D98 (+18cGy) for the centroid tracking case compared to the initial plan. Modest reductions of OAR doses (e.g. spinal cord D2: −11cGy) were achieved in the idealized tracking case. Conclusion: This study presents an automated “1-click” workflow for computing deliverable MLC tracking doses in RayStation. Adding a non-deliverable

TH-AB-202-03: A Novel Tool for Computing Deliverable Doses in Dynamic MLC Tracking Treatments

International Nuclear Information System (INIS)

Fast, M; Kamerling, C; Menten, M; Nill, S; Oelfke, U; Crijns, S; Raaymakers, B

2016-01-01

Purpose: In tracked dynamic multi-leaf collimator (MLC) treatments, segments are continuously adapted to the target centroid motion in beams-eye-view. On-the-fly segment adaptation, however, potentially induces dosimetric errors due to the finite MLC leaf width and non-rigid target motion. In this study, we outline a novel tool for computing the 4d dose of lung SBRT plans delivered with MLC tracking. Methods: The following automated workflow was developed: A) centroid tracking, where the initial segments are morphed to each 4dCT phase based on the beams-eye-view GTV shift (followed by a dose calculation on each phase); B) re-optimized tracking, in which all morphed initial plans from (A) are further optimised (“warm-started”) in each 4dCT phase using the initial optimisation parameters but phase-specific volume definitions. Finally, both dose sets are accumulated to the reference phase using deformable image registration. Initial plans were generated according to the RTOG-1021 guideline (54Gy, 3-Fx, equidistant 9-beam IMRT) on the peak-exhale (reference) phase of a phase-binned 4dCT. Treatment planning and delivery simulations were performed in RayStation (research v4.6) using our in-house segment-morphing algorithm, which directly links to RayStation through a native C++ interface. Results: Computing the tracking plans and 4d dose distributions via the in-house interface takes 5 and 8 minutes respectively for centroid and re-optimized tracking. For a sample lung SBRT patient with 14mm peak-to-peak motion in sup-inf direction, mainly perpendicular leaf motion (0-collimator) resulted in small dose changes for PTV-D95 (−13cGy) and GTV-D98 (+18cGy) for the centroid tracking case compared to the initial plan. Modest reductions of OAR doses (e.g. spinal cord D2: −11cGy) were achieved in the idealized tracking case. Conclusion: This study presents an automated “1-click” workflow for computing deliverable MLC tracking doses in RayStation. Adding a non-deliverable

3D-Spiral Small Antenna Design and Realization for Biomedical Telemetry in the MICS band

Directory of Open Access Journals (Sweden)

A. K. Skrivervik

2009-12-01

Full Text Available This work presents the design and realization procedure of small implantable antenna for biotelemetry applications. The radiator occupies a volume smaller than 3 cm3 (without its biocompatible insulation, is well matched within the Medical Implanted Communications System band and shows an adequate gain (-28.5 dB while introduced in the appropriate equivalent body medium. The latter is a homogeneous phantom with muscle dielectric properties. A prototype has been manufactured and measurements agree with theoretical predictions. Particular attention is paid to the building requirements such as the presence of glue. Specific Absorption Rate (SAR distribution has been computed evaluating the maximum power deliverable to the antenna in order to respect the regulated SAR limitation.

CO2-emission trading and green markets for renewable electricity. Wilmar - deliverable 4.1

DEFF Research Database (Denmark)

Azuma-Dicke, N.; Morthorst, Poul Erik; Ravn, H.F.

2004-01-01

This report is Deliverable 4.1 of the EU project “Wind Power Integration in Liberalised Electricity Markets” (WILMAR) and describes the application of two policy instruments, Tradable Emissions Permits (TEP’s) and Tradable Green Certificates (TGC’s) forelectricity produced from renewable energy...... sources in the European Union and the implications for implementation in the Wilmar model. The introduction of a common emission-trading system in the EU is expected to have an upward effect on the spot pricesat the electricity market. The variations of the spot price imply that some types of power...... generation may change the situation from earning money to losing money despite the increasing spot price. Heavy restrictions on emissions penalise thefossil-fuelled technologies significantly, and the associated increase in the spot price need not compensate for this. Therefore, a market of TEP’s is expected...

Bioclim Deliverable D8b: development of the physical/statistical down-scaling methodology and application to climate model Climber for BIOCLIM Work-package 3

International Nuclear Information System (INIS)

2003-01-01

too coarse and simplified. This is why we first need to find these 'physically based' relations between large scale model outputs and regional scale predictors. This is a solution to the specific problem of down-scaling from an intermediate complexity model such as CLIMBER. There are several other types of down-scaling methodologies, such has the dynamical and rule-based method presented in other BIOCLIM deliverables. A specificity of the present method is to attempt to use physical considerations in the down-scaling while a detailed 'dynamical' approach is out of reach because CLIMBER mainly provides the average climate. By contrast, an input of time-variability at various scales is necessary for a more dynamical approach. This report is organised as follows: Section 2 relates to the design and validation of the method, while section 3 reports the application to BIOCLIM simulations. We first present the employed data sources, which are the model results and the observed climatology. We then present the principles of the down-scaling method, the formulation of the predictors and the calibration of the statistical model, including results for the last glacial maximum. In section 3, the results are first presented as time series for each site, then as maps at specific times, or snapshots

Are 3-D Movies Bad for Your Eyes?

Medline Plus

Full Text Available ... use and your eyes . Children and 3-D Technology Following the lead of Nintendo, several 3-D ... Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

Load Composition Model Workflow (BPA TIP-371 Deliverable 1A)

Energy Technology Data Exchange (ETDEWEB)

Chassin, David P.; Cezar, Gustavo V.; /SLAC

2017-07-17

This project is funded under Bonneville Power Administration (BPA) Strategic Partnership Project (SPP) 17-005 between BPA and SLAC National Accelerator Laboratory. The project in a BPA Technology Improvement Project (TIP) that builds on and validates the Composite Load Model developed by the Western Electric Coordinating Council's (WECC) Load Modeling Task Force (LMTF). The composite load model is used by the WECC Modeling and Validation Work Group to study the stability and security of the western electricity interconnection. The work includes development of load composition data sets, collection of load disturbance data, and model development and validation. This work supports reliable and economic operation of the power system. This report was produced for Deliverable 1A of the BPA TIP-371 Project entitled \\TIP 371: Advancing the Load Composition Model". The deliverable documents the proposed work ow for the Composite Load Model, which provides the basis for the instrumentation, data acquisition, analysis and data dissemination activities addressed by later phases of the project.

LANL12-RS-107J PYTHON Radiography Analysis Tool (PyRAT). Mid-Year Deliverable Report for FY15

International Nuclear Information System (INIS)

Temple, Brian Allen; Armstrong, Jerawan Chudoung

2015-01-01

This document is a mid-year report on a deliverable for the PYTHON Radiography Analysis Tool (PyRAT) for project LANL12-RS-107J in FY15. The deliverable is deliverable number 2 in the work package and is titled ''Add the ability to read in more types of image file formats in PyRAT''. Right now PyRAT can only read in uncompressed TIF files (tiff files). It is planned to expand the file formats that can be read by PyRAT, making it easier to use in more situations. A summary of the file formats added include jpeg, jpg, png and formatted ASCII files.

D5.3 Reading reliability report

DEFF Research Database (Denmark)

Cetin, Bilge Kartal; Galiotto, Carlo; Cetin, Kamil

2010-01-01

This deliverable presents a detailed description of the main causes of reading reliability degradation. Two main groups of impairments are recognized: those at the physical layer (e.g., fading, multipath, electromagnetic interference, shadowing due to obstacles, tag orientation misalignment, tag...... bending, metallic environments, etc.) and those at the medium access control sub-layer (e.g., collisions due to tag-to-tag, reader-to-reader and multiple readers-to-tag interference). The review presented in this deliverable covers previous reliability reports and existing definitions of RFID reading...... reliability. Performance metrics and methodologies for assessing reading reliability are further discussed. This document also presents a review of state-of-the-art RFID reading reliability improvement schemes. The solutions are classified into physical- (PHY), medium access control- (MAC), upper-, and cross...

Preliminary guidelines for priority setting between measures, Deliverable 3.4 of the H2020 project SafetyCube (Safety CaUsation, Benefits and Efficiency).

NARCIS (Netherlands)

Martensen, H. Van den Berghe, W. Wijnen, W. Weijermars, W.A.M. Carnis, L. & Elvik, R.

2017-01-01

The present deliverable describes the economic assessment of counter measures. Cost-effectiveness analysis and cost-utility analysis are compared to cost-benefit analysis. Cost-effectiveness analysis helps to estimate the costs per prevented fatality or injury. To evaluate the effectiveness in terms

D4SCIENCE-II - Report on inter-projects coordination and collaboration

OpenAIRE

Castelli, Donatella; Zoppi, Franco

2010-01-01

This deliverable reports on the collaborations with other FP7 projects and R&D programmes established by D4Science-II from the beginning of the project until July 2010. The collaborations described are of different nature, as they range from purely technical exchanges involving mutual exploitation of technologies to the sharing of e- Infrastructure resources and to the joint organization of networking and dissemination events. The deliverable presents these collaborations clustered into: (i) ...

D1.3 -- Short Report on the First Draft Multi-link Channel Model

DEFF Research Database (Denmark)

Pedersen, Troels; Raulefs, Ronald; Steinboeck, Gerhard

This deliverable is a preliminary report on the activities towards multi-link channel models. It summarizes the activities and achievements of investigations of WP1 Task 1.2 in the first year of the project. In this deliverable work focuses on the characterization of the crosscorrelation of multi...

Digital 3D Borobudur – Integration of 3D surveying and modeling techniques

Directory of Open Access Journals (Sweden)

D. Suwardhi

2015-08-01

Full Text Available The Borobudur temple (Indonesia is one of the greatest Buddhist monuments in the world, now listed as an UNESCO World Heritage Site. The present state of the temple is the result of restorations after being exposed to natural disasters several times. Today there is still a growing rate of deterioration of the building stones whose causes need further researches. Monitoring programs, supported at institutional level, have been effectively executed to observe the problem. The paper presents the latest efforts to digitally document the Borobudur Temple and its surrounding area in 3D with photogrammetric techniques. UAV and terrestrial images were acquired to completely digitize the temple, produce DEM, orthoimages and maps at 1:100 and 1:1000 scale. The results of the project are now employed by the local government organizations to manage the heritage area and plan new policies for the conservation and preservation of the UNESCO site. In order to help data management and policy makers, a web-based information system of the heritage area was also built to visualize and easily access all the data and achieved 3D results.

Risk of injury by driving with alcohol and other drugs. Driving under the Influence of Drugs, Alcohol and Medicines DRUID, Deliverable 2.3.5.

NARCIS (Netherlands)

Hels, T. Bernhoft, I.M. Lyckegaard, A. Houwing, S. Hagenzieker, M.P. Legrand, S.-A. Isalberti, C. Van der Linden, T. & Verstraete, A.

2011-01-01

The objective of this deliverable is to assess the risk of driving with alcohol, illicit drugs and medicines in various European countries. In total nine countries participated in the study on relative risk of serious injury/fatality while positive for psychoactive substances. Six countries

PUBLIC POLICIES TO R&D IN ROMANIA IN THE CONTEXT OF THE EU STATE AID POLICY

Directory of Open Access Journals (Sweden)

Bacila Nicolae

2015-07-01

Full Text Available From an economic perspective, the importance of EU state aid policy refers to correcting “market failure” situations that may occur in the economy, aiming at maintaining an undistorted competition in the economic environment. In the context of the Commission focusing its efforts towards promoting R&D investment through Europe 2020 strategy, Romania is a modest innovator and is facing a relatively low level of economic competitiveness. The present paper aims at providing a contribution to the literature on public policies to R&D in the EU, developing both a quantitative and a qualitative analysis of public policies to R&D in Romania in the context of the EU state aid policy. Our research hypothesis considers that public policies to R&D in Romania, as in other Central and Eastern European countries, are following a convergence process with the practices from the EU level. Based on data provided by Eurostat, we have stressed that the existing gap between the national level and the EU level tends to maintain in the state aid field even in the future, in spite of Romanian government sector R&D expenditure tending to converge with the EU level, which highlights the potential of catching up with the European model. We believe that the success of the convergence process will depend in the future, to a large extent, on the implementation of the modernised legal and institutional framework of state aid policy, as well as on the capacity to build consensus by policy makers around the necessity to structure future economic development around R&D investment. In order to successfully address these structural R&D problems, the National Strategy for Research, Development and Innovation aims to establish R&D as engine for increasing economic competitiveness, while at the same time strengthening strategic areas with comparative advantages, supporting public-private partnerships, funding clusters in areas of smart specialisation, developing intellectual

Programme d'immersion du Sustainable Development Policy ...

International Development Research Centre (IDRC) Digital Library (Canada)

Programme d'immersion du Sustainable Development Policy Institute sur les questions de paix, de violence et de développement. Alors que la paix, la violence et le développement représentent des défis de taille au Pakistan, ils constituent rarement le point de mire pour l'élaboration de politiques. De surcroît, les étudiants ...

Table of 3D organ model IDs and organ names (PART-OF Tree) - BodyParts3D | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us BodyParts3D Table of 3D organ model IDs and organ names (PART-OF Tree) Data detail Data name Table of 3D org...an model IDs and organ names (PART-OF Tree) DOI 10.18908/lsdba.nbdc00837-002 Description of ...data contents List of downloadable 3D organ models in a tab-delimited text file format, describing the correspondence between 3D org...an model IDs and organ names available in PART-OF Tree. D...atabase Site Policy | Contact Us Table of 3D organ model IDs and organ names (PART-OF Tree) - BodyParts3D | LSDB Archive ...

SU-F-T-333: Deliverability Considerations in Modulated Photon Radiotherapy (XMRT)

Energy Technology Data Exchange (ETDEWEB)

McGeachy, P [Department of Medical Physics, CancerCare Manitoba, Winnipeg, MB (Canada); Weppler, S; Villarreal-Barajas, J [Department of Physics and Astronomy, University of Calgary, Calgary, Alberta (Canada); Department of Medical Physics, Tom Baker Cancer Center, Calgary, AB (Canada); Zinchenko, Y [Department of Mathematics and Statistics, University of Calgary, Calgary, Alberta (Canada); Khan, R [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States)

2016-06-15

Purpose: Modulated Photon Radiotherapy (XMRT), which simultaneously optimizes photon beamlet energy (6 and 18 MV) and fluence, has shown dosimetric improvements for fluence map optimization (FMO) when compared to conventional single-energy intensity modulated radiotherapy. However, generating deliverable multi-leaf collimator (MLC) sequences for XMRT needs to be explored. Therefore, two problems were investigated: 1) The ability to generate MLC-sequenced fluence maps from FMO XMRT solutions for a prostate case 2) The impact of fluence smoothening constraints imposed in the FMO on the deliverability and dose distribution. Methods: XMRT FMO solutions for a clinical prostate case employing standard dosimetric constraints, prescriptions, and a seven coplanar beam arrangement were generated. Smoothening constraints in the FMO utilized a sum of positive gradients approach. Sequenced maps were generated using an in-house optimization algorithm (MLCSO). The maximum leaf speed, minimum leaf separation, and transmission through MLC leaves were set to 2.5 mm/s, 1 mm, and 1%, respectively. The resulting sequenced maps for each field were compared with the original FMO solutions through gamma analysis (0.5%/0.5 mm) and root mean square error (RMSE). This comparison was done for both the smoothed and unsmoothed XMRT solutions. Results: Average RMSE and gamma agreement of 0.44, 93%and 0.36, 95% were obtained for unsmoothed 6 and 18 MV contributions from XMRT sequenced maps. The sequenced maps with smoothening constraints had better agreement with their respective optimal fluences, with RMSEs of 0 and gamma pass rates of 100% for all comparisons. This improved smoothening led to increased dose to critical structures (rectum, bladder, and femoral heads); however solutions were still clinically acceptable. Conclusion: For a clinical prostate case, XMRT FMO fluence maps were suitable for conversion into deliverable MLC sequences. Imposing smoothening constraints during FMO resulted

DoD International Armaments Cooperation Policy

National Research Council Canada - National Science Library

Cohen, William

1997-01-01

.... In the evolving environment of coalition warfare, limited resources, and a global industrial and technology base, it is DoD policy that we utilize International Armaments Cooperation to the maximum...

32 CFR 237a.3 - Objective and policy.

Science.gov (United States)

2010-07-01

...) MISCELLANEOUS PUBLIC AFFAIRS LIAISON WITH INDUSTRY § 237a.3 Objective and policy. (a) It is important that...D. Such understanding can be achieved by (1) wide dissemination of information to the business community, consistent with national security, and (2) cooperation with industry in public relations...

idSpace D2.3 – Semantic meta-model integration and transformations v2

DEFF Research Database (Denmark)

Dolog, Peter; Grube, Pascal; Schmid, Klaus

2009-01-01

This deliverable discusses an extended set of requirements for transformations and metamodel for creativity techniques. Based on the requirements, the deliverable provides refined meta-model. The metamodel allows for more advanced transforma-tion concepts besides the previously delivered graph tr...... oriented implemen-tation with portlets and widgets in the Liferay portal....

Urban strategies for Waste Management in Tourist Cities. D2.7: Compendium of waste management practices in pilot cities and best practices in touristic cities

OpenAIRE

Gruber, Iris; Mayerhofer, Johannes; Obersteiner, Gudrun; Ramusch, Roland; Romein, A.; Eriksson, Mattias; Grosse, Juliane; MC. Nascimento, Gisela; Bjorn Olsen, Trine; de Luca, Claudia; Zapata Aranda, Pilar; Kazeroni, Marie; Kovacs, Ernest

2017-01-01

This report (Deliverable D2.7) refers to URBANWASTE Work Package 2, Task 2.8. Under this Task the current waste prevention and management practices in the URBANWASTE pilot cases are investigated and best practices coming from the EU context (focussing on touristic processes) are identified. This document shall support the selection of innovative strategies to be carried out within Work Package WP 4. A comparative policy review of national waste management strategies and targets in the Europea...

Inventory of measures, typology of non-intentional effects and a framework for policy packaging

DEFF Research Database (Denmark)

Givoni, Moshe; Macmillan, James; Gudmundsson, Henrik

2010-01-01

-making at the European level. Specifically, this deliverable aims to further methodological advancement with respect to the identification, classification, ex-ante prevention and ex-post mitigation of policies‘ unintended effects, and the systematic manner in which individual policy measures may be combined so...... as to improve their effectiveness, acceptability and feasibility. Overall, we argue that policy packaging can offer a far greater potential for achieving policy targets and objectives than single policy measures deployed in isolation. Yet, a careful and relatively well designed process must be undertaken...... for such packages to be effective....

32 CFR 151.3 - Policy.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Policy. 151.3 Section 151.3 National Defense... FORCES POLICIES AND INFORMATION § 151.3 Policy. It is the policy of the Department of Defense to protect, to the maximum extent possible, the rights of U.S. personnel who may be subject to criminal trial by...

D1.1 Detailed requirements for GloNet use case and domain glossary

NARCIS (Netherlands)

Afsarmanesh, H.; Korojelo, S.; Sargolzaei, M.; Thamburaj, V.; Madhavan, V.; Camarinha-Matos, L.

2012-01-01

D1.1 is one of the first deliverables of the project, which sets the base for research in all other WPs in GloNet. The findings reported in this deliverable are resulted through direct involvement of the two energy related industries within the GloNet consortium (iPLON and Prolon), as well as the

Bio-fuels energy policy and grain transportation flows : implications for inland waterways and short sea shipping.

Science.gov (United States)

2010-09-15

This project develops a foundation for analysis of the effects of U.S. biofuel energy policy on domestic : and international grain flows and patterns. The primary deliverable of this project is an updated and : expanded spatial equilibrium model of w...

Overview of 3D Documentation Data and Tools available for Archaeological Researches: case study of the Romanesque Church of Dugny-sur-Meuse (France)

Science.gov (United States)

Macher, H.; Grussenmeyer, P.; Kraemer, C.; Guillemin, S.

2015-08-01

In this paper, the 3D documentation of the full structure of the Romanesque church of Dugny-sur-Meuse is discussed. In 2012 and 2013, a 3D recording project was carried out under the supervision of the Photogrammetry and Geomatics Research Group from INSA Strasbourg (France) in cooperation with C. Kraemer, archaeologist from Nancy (France). The goal of the project was on one hand to propose new solutions and tools to the archaeologists in charge of the project especially for stone by stone measurements. On the other hand, a simplified 3D model was required by the local authorities for communication purposes. To achieve these goals several techniques were applied namely GNSS measurements and accurate traverse networks, photogrammetric recordings and terrestrial laser scanning acquisitions. The various acquired data are presented in this paper. Based on these data, several deliverables are also proposed. The generation of orthoimages from plane as well as cylindrical surfaces is considered. Moreover, the workflow for the creation of a 3D simplified model is also presented.

Overview of 3D Documentation Data and Tools available for Archaeological Researches: case study of the Romanesque Church of Dugny-sur-Meuse (France

Directory of Open Access Journals (Sweden)

H. Macher

2015-08-01

Full Text Available In this paper, the 3D documentation of the full structure of the Romanesque church of Dugny-sur-Meuse is discussed. In 2012 and 2013, a 3D recording project was carried out under the supervision of the Photogrammetry and Geomatics Research Group from INSA Strasbourg (France in cooperation with C. Kraemer, archaeologist from Nancy (France. The goal of the project was on one hand to propose new solutions and tools to the archaeologists in charge of the project especially for stone by stone measurements. On the other hand, a simplified 3D model was required by the local authorities for communication purposes. To achieve these goals several techniques were applied namely GNSS measurements and accurate traverse networks, photogrammetric recordings and terrestrial laser scanning acquisitions. The various acquired data are presented in this paper. Based on these data, several deliverables are also proposed. The generation of orthoimages from plane as well as cylindrical surfaces is considered. Moreover, the workflow for the creation of a 3D simplified model is also presented.

Deliverable 1.2: Report on ENP Policy Concerning its Objectives and Policy Measures over Time

NARCIS (Netherlands)

Borell, M.; Boschma, R.A.; Monastiriotis, V.; Wesselink, E.

2012-01-01

This report consists of two working papers, which subsequently offer an overview of the history, structure and institutional instruments of the ENP and the policies that have been implemented due to the ENP, and a review of the political and political economy literature on the ENP. Together these

REPAiR: REsource Management in Peri-urban AReas: Going Beyond Urban Metabolism : D3.3 Process model for the two pilot cases: Amsterdam, the Netherlands & Naples, Italy

NARCIS (Netherlands)

Geldermans, R.J.; Wandl, A.; Steenmeijer, M.A.; Furlan, C.; Streefland, Tamara; Formato, E.; Cerreta, Maria; Amenta, L.; Varju, Viktor; Inglese, Pasquale; Iodice, Silvia; Berruti, Gilda; Varju, Viktor; Grünhut, Z; Bodor, Akos; Lovász, Virág; Moticska, Zsombor; Tonini, Davide; Taelman, Sue Ellen

2018-01-01

Deliverable 3.3 of Work Package 3 concerns an integrated analysis of the two pilot case studies within the REPAiR project, Amsterdam and Naples, from the vantage point of waste production and processing, and the transition to circular societies. It comprises spatial, social and material flow

10 CFR 1009.3 - Policy.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Policy. 1009.3 Section 1009.3 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) GENERAL POLICY FOR PRICING AND CHARGING FOR MATERIALS AND SERVICES SOLD BY DOE § 1009.3 Policy. (a) The Department's price or charge for materials and services sold to persons and...

D3.4: Recommendations for common policy across the EU regarding professional development as an element of quality in ECEC and child wellbeing for all. Final report

DEFF Research Database (Denmark)

Jensen, Bente; Iannone, Rosa Lisa

and exemplary case studies from three European countries (D3.3). The overall aim of the report is to highlight priorities in ECEC professional development, based on WP3’s findings and develop recommendations regarding high-quality provisions for common EU-policies. This led to the identification of six policy...... development; and vi) addressing the vulnerable through professional development. The good practices highlighted in the report have been chosen as examples, given their success. However, these must be regarded as practices that may inspire changes, which must nevertheless be adopted to cultural and systemic...

BlogForever D3.3: Development of the Digital Rights Management Policy

OpenAIRE

Farrell, Tracie; Kim, Yunhyong; Pinsent, Ed; Kopidaki, Stella; Rynning, Morten; Manolopoulos, Ioanis; Papadopoulou, Olympia; Arampatzis, Stratos; Trochidis, Ilias; Zioga, Despoina

2013-01-01

This report presents a set of recommended practices and approaches that a future BlogForever repository can use to develop a digital rights management policy. The report outlines core legal aspects of digital rights that might need consideration in developing policies, and what the challenges are, in particular, in relation to web archives and blog archives. These issues are discussed in the context of the digital information life cycle and steps that might be taken within the workflow of the...

Are 3-D Movies Bad for Your Eyes?

Medline Plus

Full Text Available ... from viewing usually relieves the discomfort. More on computer use and your eyes . Children and 3-D ... Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For ...

Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative Product Lifecycle Management on Ship Maintenance and Modernization Cost Savings

Science.gov (United States)

2015-03-21

Policy - 37 - Naval Postgraduate School the number of brazes and welds from 25 to just five. There are currently more than 300 3D printing ...NPS-LM-15-002 ACQUISITION RESEARCH PROGRAM SPONSORED REPORT SERIES Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D ...Program Sponsored Report Series Make or Buy: An Analysis of the Impacts of 3D Printing Operations, 3D Laser Scanning Technology, and Collaborative

Are 3-D Movies Bad for Your Eyes?

Medline Plus

Full Text Available ... be concerned that 3-D movies, TV or video games will damage the eyes or visual system. Some ... Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms of Service For ...

Public R&D Policy Impact Evaluation:Propensity Score Matching and Structural Modeling Estimations

OpenAIRE

Ilbeigi, Alireza

2017-01-01

This dissertation is about public research and development (R&D) subsidies to support private firms doing innovative activities and quantitative impact evaluation of the policy on total factor productivity (TFP) change and additional R&D effort. Public R&D subsidization as a public R&D policy, beside different types of public interventions, has been widely used by governments to stimulate private R&D. These policies aim to fill the gap between the private and social rates of returns by encour...

Recording Cultural Heritage Using Terrestrial Laserscanning - Dealing with the System, the Huge Datasets they Create and Ways to Extract the Necessary Deliverables you can Work with

Science.gov (United States)

Christofori, E.; Bierwagen, J.

2013-07-01

Recording Cultural Heritage objects using terrestrial laserscanning becomes more and more popular over the last years. Since terrestrial Laserscanning System (TLS) Manufacturers have strongly increased the amount and speed of data captured with a single scan at each system upgrade and cutting down system costs the use of TLS Systems for recording cultural heritage is an option for recording worth to think about beside traditional methods like Photogrammetric. TLS Systems can be a great tool for capturing complex cultural heritage object within a short amount of time beside the traditional methods but can be a nightmare to handle for further process if not used right while capturing. Furthermore TLS Systems still have to be recognized as survey equipment, even though some of the manufactures promote them as everyday tool. They have to be used in an intelligent way having in mind the clients and the individual cultural objects needs. Thus the efficient way to use TLS Systems for data recording becomes a relevant topic to deal with the huge Amount of data the Systems collect while recording. Already small projects can turn into huge Pointcloud Datasets that End user, like Architects or Archaeologist neither can't deal with as their technical equipment doesn't fit the requirements of the Dataset nor do they have the software tools to use the Data as the current software tools still are high prized. Even the necessary interpretation of the Dataset can be a tough task if the people who have to work on with the Pointcloud aren't educated right in order to understand TLS and the results it creates. The use of TLS Systems has to have in mind the project requirements of the individual Heritage Object, like the required accuracy, standards for Levels of Details (e.g. "Empfehlungen für die Baudokumentation, Günther Eckstein, Germany"), the required kind of Deliverables (Visualization, 2D Drawings, True Deformation Drawings, 3D Models, BIM or 4D - Animations) as well as the

Children's Participation in Decision-Making in the Philippines: Understanding the Attitudes of Policy-Makers and Service Providers

Science.gov (United States)

Bessell, Sharon

2009-01-01

This article explores the ideas about children's participation in decision-making held by government officials and non-government representatives engaged in promoting children's participation in the Philippines. It suggests that the ideas that policy-makers and service deliverers hold about children's participation are heterogeneous, diverse and…

Innovation Policy for Knowledge Production and R&D

DEFF Research Database (Denmark)

Borrás, Susana; Edquist, Charles

Who produces scientific and technical knowledge these days? What type of knowledge is being produced and for what purposes? Why are firms and governments funding research and development? This chapter studies the role of knowledge production (especially R&D activities) in the innovation process f...... those tensions and unbalances. This chapter suggests that innovation policy develops a portfolio approach to the public investment in R&D and knowledge production....... from an innovation system perspective. It examines how governments and public agencies in different countries and at different times have actually approached the issue of building, maintaining and using knowledge production in their innovation systems. It also examines the critical and most important...... issues at stake from the point of view of innovation policy, looking in particular at the unresolved tensions and systemic unbalances related to knowledge production and last but not least, it elaborates a set of overall criteria for the selection and design of relevant policy instruments and addresses...

Social Policy in Social Work PhD Programs in the United States

Science.gov (United States)

Lightfoot, Elizabeth; Gal, John; Weiss-Gal, Idit

2018-01-01

While there has been a long-standing concern about the role of policy within social work education and social work practice, most of the emphasis has been on social work education at the BSW and MSW levels. This article examines policy education at the PhD level. It first explores how policy is taught in social work PhD programs in the United…

37 CFR 204.3 - General policy.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false General policy. 204.3 Section 204.3 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT OFFICE AND PROCEDURES PRIVACY ACT: POLICIES AND PROCEDURES § 204.3 General policy. The Copyright Office serves primarily...

RECORDING CULTURAL HERITAGE USING TERRESTRIAL LASERSCANNING – DEALING WITH THE SYSTEM, THE HUGE DATASETS THEY CREATE AND WAYS TO EXTRACT THE NECESSARY DELIVERABLES YOU CAN WORK WITH

Directory of Open Access Journals (Sweden)

E. Christofori

2013-07-01

Full Text Available Recording Cultural Heritage objects using terrestrial laserscanning becomes more and more popular over the last years. Since terrestrial Laserscanning System (TLS Manufacturers have strongly increased the amount and speed of data captured with a single scan at each system upgrade and cutting down system costs the use of TLS Systems for recording cultural heritage is an option for recording worth to think about beside traditional methods like Photogrammetric. TLS Systems can be a great tool for capturing complex cultural heritage object within a short amount of time beside the traditional methods but can be a nightmare to handle for further process if not used right while capturing. Furthermore TLS Systems still have to be recognized as survey equipment, even though some of the manufactures promote them as everyday tool. They have to be used in an intelligent way having in mind the clients and the individual cultural objects needs. Thus the efficient way to use TLS Systems for data recording becomes a relevant topic to deal with the huge Amount of data the Systems collect while recording. Already small projects can turn into huge Pointcloud Datasets that End user, like Architects or Archaeologist neither can't deal with as their technical equipment doesn't fit the requirements of the Dataset nor do they have the software tools to use the Data as the current software tools still are high prized. Even the necessary interpretation of the Dataset can be a tough task if the people who have to work on with the Pointcloud aren't educated right in order to understand TLS and the results it creates. The use of TLS Systems has to have in mind the project requirements of the individual Heritage Object, like the required accuracy, standards for Levels of Details (e.g. "Empfehlungen für die Baudokumentation, Günther Eckstein, Germany", the required kind of Deliverables (Visualization, 2D Drawings, True Deformation Drawings, 3D Models, BIM or 4D �

An Overview of DoD Policy for and Administration of Independent Research and Development

Science.gov (United States)

1975-05-01

1969-1970) The Congress became directly involved in IR&D policy matters during the floor debate on the FY 1970 Military Procurement Act. This...trial period the’data bank was restricted to DlOD usirs. However, in December 1974 NASA was granted ’access "to the IR&D Data Dank :. 3,4. IM~D DatA...Subject Matter of S3003," Washington, D. C., 11 February 1970. 54. Deputy Secretary of Defense, "Independent Research and Development/Bid and

Vitamin D status in mothers with pre-eclampsia and their infants: a case-control study from Serbia, a country without a vitamin D fortification policy.

Science.gov (United States)

Djekic-Ivankovic, Marija; Weiler, Hope; Jones, Glenville; Kaufmann, Martin; Kaludjerovic, Jovana; Aleksic-Velickovic, Vesna; Mandić, Ljuba M; Glibetic, Maria

2017-07-01

The objective of the present study was to determine if vitamin D intake and status are associated with pre-eclampsia in a country without a vitamin D fortification policy. A case-control study of pregnancies with (case) and without (control) pre-eclampsia was conducted from January to April when UVB is minimal. Maternal and cord blood obtained at delivery were measured for plasma 25-hydroxycholecalciferol (25-OH-D3), 3-epimer of 25-OH-D3 (3-epi-25-OH-D3) and 24,25-dihydroxycholecalciferol (24,25-(OH)2D3) by LC-MS/MS and maternal 1,25-dihydroxyvitamin D (1,25-(OH)2D). Differences between groups were tested with ANOVA and Bonferroni post hoc tests (Pcase: 11·2 (sd 5·1); control: 16·1 (sd 5·7) ng/ml; P=0·0006), 25-OH-D3 (case: 10·0 (sd 4·9); control: 14·2 (sd 5·8) ng/ml; P=0·002), 3-epi-25-OH-D3 (case: 0·5 (sd 0·2); control: 0·7 (sd 0·2) ng/ml; P=0·0007) and 1,25-(OH)2D (case: 56·5 (sd 26·6); control: 81·0 (sd 25·7) pg/ml; P=0·018), while 24,25-(OH)2D3 was not different between groups. Infants did not differ in total plasma 25-OH-D, 25-OH-D3, 3-epi-25-OH-D3 and 24,25-(OH)2D3, but the mean proportion of 3-epi-25-OH-D3 was higher in the infant case group (case: 7·9 (sd 1·1); control: 7·0 (sd 1·4) % of total 25-OH-D3; P=0·005). A high prevalence of vitamin D deficiency, as defined by plasma 25-OH-D<12 ng/ml, was observed in 47 % of all mothers and 77 % of all infants. These data underscore the need for prenatal vitamin D supplementation and a food fortification policy in Serbia.

Policy revision in health enterprise information security: P3WG final report

Science.gov (United States)

Sostrom, Kristen; Collmann, Jeff R.

2003-05-01

Health information management policies usually address the use of paper records with little or no mention of electronic health records. Information Technology (IT) policies often ignore the health care business needs and operational use of the information stored in its systems. Representatives from the Telemedicine & Advanced Technology Research Center (TATRC), TRICARE and Offices of the Surgeon General of each Military Service, collectively referred to as the Policies, Procedures and Practices Work Group (P3WG) examined military policies and regulations relating to computer-based information systems and medical records management. Using an interdisciplinary and interservice QA approach they compared existing military policies with the Health Insurance Portability and Accountability Act (HIPAA) Security Rule to identify gaps and discrepancies. The final report, including a plain English explanation of the individual standards and relevance to the Department of Defense (DoD), a comparative analysis and recommendations, will feed in to the security management process and HIPAA implementation efforts at multiple levels within the DoD. In light of High Reliability Theory, this process models how large enterprises may coordinate policy revision and reform across broad organizational and work domains, building consensus on key policy reforms among military stakeholders across different disciplines, levels of command hierarchy and services.

REPAiR: REsource Management in Peri-urban AReas: Going Beyond Urban Metabolism : D 8.6 Detailed Dissemination Plan and Dissemination Kit

NARCIS (Netherlands)

Cerić, Dennis; Amenta, L.; Attademo, Anna

2017-01-01

The Detailed Dissemination Plan and Dissemination Kit is a strategic document for the beneficiaries helping them to establish the bases for their dissemination activities. It is a more detailed version of the Basic Dissemination Plan and Corporate Identity, deliverables of the REPAiR project D 8.3

Bioclim Deliverable D6b: application of statistical down-scaling within the BIOCLIM hierarchical strategy: methods, data requirements and underlying assumptions

International Nuclear Information System (INIS)

2004-01-01

-study regions were identified, together with the additional issues which arise in applying these techniques to output from the BIOCLIM simulations. This preliminary work is described in this BIOCLIM technical note. It provides an overview of statistical down-scaling methods, together with their underlying assumptions and advantages/disadvantages. Specific issues relating to their application within the BIOCLIM context (i.e., application to the IPSL C M4 D snapshot simulations) are identified, for example, the stationarity issue. The predictor and predictand data sets that would be required to implement these methods within the BIOCLIM hierarchical strategy are also outlined, together with the methodological steps involved. Implementation of these techniques was delayed in order to give priority to the application of the rule-based down-scaling method developed in WP3 to WP2 EMIC output (see Deliverable D8a). This task was not originally planned, but has allowed more comprehensive comparison and evaluation of the BIOCLIM scenarios and down-scaling methods to be undertaken

Data needs and computational requirements for ST decision making. Internal deliverable ID6.2.1

DEFF Research Database (Denmark)

Clement, Rémy; Tournebise, Pascal; Perkin, Samuel

The objective of this deliverable is to present the requirements for adapting available tools/models and identifying data needs for probabilistic reliability analysis and optimal decision-making in the short-term decision making process. It will serve as a basis for the next tasks of GARPUR work ...

Deep imitation learning for 3D navigation tasks.

Science.gov (United States)

Hussein, Ahmed; Elyan, Eyad; Gaber, Mohamed Medhat; Jayne, Chrisina

2018-01-01

Deep learning techniques have shown success in learning from raw high-dimensional data in various applications. While deep reinforcement learning is recently gaining popularity as a method to train intelligent agents, utilizing deep learning in imitation learning has been scarcely explored. Imitation learning can be an efficient method to teach intelligent agents by providing a set of demonstrations to learn from. However, generalizing to situations that are not represented in the demonstrations can be challenging, especially in 3D environments. In this paper, we propose a deep imitation learning method to learn navigation tasks from demonstrations in a 3D environment. The supervised policy is refined using active learning in order to generalize to unseen situations. This approach is compared to two popular deep reinforcement learning techniques: deep-Q-networks and Asynchronous actor-critic (A3C). The proposed method as well as the reinforcement learning methods employ deep convolutional neural networks and learn directly from raw visual input. Methods for combining learning from demonstrations and experience are also investigated. This combination aims to join the generalization ability of learning by experience with the efficiency of learning by imitation. The proposed methods are evaluated on 4 navigation tasks in a 3D simulated environment. Navigation tasks are a typical problem that is relevant to many real applications. They pose the challenge of requiring demonstrations of long trajectories to reach the target and only providing delayed rewards (usually terminal) to the agent. The experiments show that the proposed method can successfully learn navigation tasks from raw visual input while learning from experience methods fail to learn an effective policy. Moreover, it is shown that active learning can significantly improve the performance of the initially learned policy using a small number of active samples.

CRISP. Dependable ICT Support of Power Grid Operations

Energy Technology Data Exchange (ETDEWEB)

Gustavsson, R.; Mellstrand, P.; Tornqvist, B. [Blekinge Institute of Technology BTH, Karlskrona (Sweden); Akkermans, H. [EnerSearch, Malmoe (Sweden)

2005-03-15

This deliverable D2.4 Dependable ICT support 0f Power Grid Operations is a link between deliverable D1.6 Information security models and their economics and planned activities in WP III, that is, Implementation, Experiments and Tests. Background CRISP material includes deliverables of D2.2 Design document and multi-agent simulation tool for distributed demand-supply matching and D2.3 Design document and simulation tool for diagnostics of high-DG power networks. Furthermore there are links between this document and the deliverable D1.7 Report on distributed network architectures and D1.8 Reports on case study simulations and results. In short, this document specifies and extends the general background on security models and dependability models of deliverable D1.6 with CRISP specific material of D2.2 and D2.4 towards the experiments and tests of WP III. The focus of this deliverable is on dependable ICT support of power grid operation. By recasting the three CRISP experiments into three Scenarios in Chapter 2 we claim that we have a good description of benefits and challenges related to future virtual utilities. Among the challenges are securing trustworthy operation from a technical operation side (avoid disturbances such as blackouts) as wee as from a user-centric business point of view (value added power related services). Our investigation on proper means to safeguard operations of future virtual utilities begins with an assessment of lessons learned from recent (2003) big blackouts worldwide in Chapter 3. We propose an accident diagnosis and repair model (STAMP in Section 3.2) suitable for the complex socio-technical system we envisage for future cell-based virtual utilities. From this analysis and the background material from deliverable D1.6 Information security models and their economics, we then reassess the dependability concerns related to the CRISP related scenarios of Chapter 2. The deliverable provides some novel ideas and models that we claim are

CRISP. Dependable ICT Support of Power Grid Operations

International Nuclear Information System (INIS)

Gustavsson, R.; Mellstrand, P.; Tornqvist, B.; Akkermans, H.

2005-03-01

This deliverable D2.4 Dependable ICT support 0f Power Grid Operations is a link between deliverable D1.6 Information security models and their economics and planned activities in WP III, that is, Implementation, Experiments and Tests. Background CRISP material includes deliverables of D2.2 Design document and multi-agent simulation tool for distributed demand-supply matching and D2.3 Design document and simulation tool for diagnostics of high-DG power networks. Furthermore there are links between this document and the deliverable D1.7 Report on distributed network architectures and D1.8 Reports on case study simulations and results. In short, this document specifies and extends the general background on security models and dependability models of deliverable D1.6 with CRISP specific material of D2.2 and D2.4 towards the experiments and tests of WP III. The focus of this deliverable is on dependable ICT support of power grid operation. By recasting the three CRISP experiments into three Scenarios in Chapter 2 we claim that we have a good description of benefits and challenges related to future virtual utilities. Among the challenges are securing trustworthy operation from a technical operation side (avoid disturbances such as blackouts) as wee as from a user-centric business point of view (value added power related services). Our investigation on proper means to safeguard operations of future virtual utilities begins with an assessment of lessons learned from recent (2003) big blackouts worldwide in Chapter 3. We propose an accident diagnosis and repair model (STAMP in Section 3.2) suitable for the complex socio-technical system we envisage for future cell-based virtual utilities. From this analysis and the background material from deliverable D1.6 Information security models and their economics, we then reassess the dependability concerns related to the CRISP related scenarios of Chapter 2. The deliverable provides some novel ideas and models that we claim are

Possibilities for a valorisation of geomorphologic research deliverables

Science.gov (United States)

Geilhausen, M.; Götz, J.; Otto, J.-C.; Schrott, L.

2009-04-01

Many geomorphological studies focus on fundamental research questions in large parts, although there are lots of applied fields like landslide hazard assessment or water framework directive. As fundamental research is a common property, their outcomes should be more "open" and accessible to the public. This means that scientists have to find new ways presenting their results and outcomes besides publishing in scientific journals. This paper shows possibilities for a valorisation of geomorphologic research deliverables using print as well as digital media. Geotrails explain remarkable and exciting landscape features using information boards and become more and more popular and important for tourism in many parts of the world. With the growing interest in environmental change and outdoor activities, print media like field guides reach an increasing number of people. Field guides and Geotrails can be coupled in order to arise awareness about geomorphological landforms and to deliver more specific information on the site beyond the information given on the boards in the field. As field guides are designed for the general public they can be used for educational purposes as well. Today, this information can also be found in the internet offering virtual trips through landscapes using dynamic maps. Here, server side GIS technologies (WebGIS) using standardised interfaces provide new possibilities to show geomorphic data to the public and to share them with the scientific community. Furthermore, data formats like XML or KML are powerful tools for data exchange and can be used in interactive data viewers like Google Earth. We will present the Geotrail "Geomorphologischer Lehrpfad am Fuße der Zugspitze. Das Reintal - Eine Wanderung durch Raum und Zeit" (Bavarian Alps, Germany). Additionally, three geomorphologic WebGIS applications (Geomorphologic map Turtmanntal, Permafrostmap of Austria, Geomorphologic maps of Germany) will exemplify how geomorphologic information and

24 CFR 50.3 - Environmental policy.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Environmental policy. 50.3 Section... Development PROTECTION AND ENHANCEMENT OF ENVIRONMENTAL QUALITY General: Federal Laws and Authorities § 50.3 Environmental policy. (a) It is the policy of the Department to reject proposals which have significant adverse...

12 CFR 517.3 - Policy.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Policy. 517.3 Section 517.3 Banks and Banking... is the policy of the OTS that minorities, women and individuals with disabilities and entities owned by minorities, women and individuals with disabilities are given the opportunity to participate to...

Planning and Implementing a 3D Printing Service in an Academic Library

Science.gov (United States)

Gonzalez, Sara Russell; Bennett, Denise Beaubien

2014-01-01

Initiating a 3D printing service in an academic library goes beyond justification of its value and gaining the necessary library and administrative support. Additional aspects such as policies, environmental safety, training, publicizing, maintenance, and scope of service must be considered. This article provides a guide to developing a 3D print…

Deliverable 2.2

DEFF Research Database (Denmark)

Tarabanis, Konstantinos; Efthimios, Tambouris; Zotou, Maria

2016-01-01

etc. The report also presents the OD-PBL design pathway, which is a further development of the OD-PBL methodological recommendations presented in the D2.1. This design pathway aims to guide educators when designing learning processes that aim to teach OD by utilizing the PBL learning strategy......The work carried out resulted in the description of the LA field and in the presentation of a total of 18 LA tools that can analyse educational data that can be utilized in the project to support multiple PBL aspects, such as feedback, reflection, self-driven learning, collaboration, application....... The pathway consists of 6 main steps, i.e. Analysis, Gathering of inputs, Design, Development, Implementation and Reflection. Each step provides guidelines on how to plan an OD course and learning processes, and combines all previous project results from D1.1, D1.2, D1.3 and D2.1. Finally, the report presents...

25 CFR 23.3 - Policy.

Science.gov (United States)

2010-04-01

... AFFAIRS, DEPARTMENT OF THE INTERIOR HUMAN SERVICES INDIAN CHILD WELFARE ACT Purpose, Definitions, and Policy § 23.3 Policy. In enacting the Indian Child Welfare Act of 1978, Pub. L. 95-608, the Congress has declared that it is the policy of this Nation to protect the best interests of Indian children and to...

D3.2: SPEED-5G enhanced functional and system architecture, scenarios and performance evaluation metrics

OpenAIRE

Mumtaz, Shahid; Saidul, Kazi; Rodriguez, Huq Jonathan; Marques, Paulo; Radwan, Ayman; BT, Keith Briggs Michael Fitch; Georgakopoulos, Andreas; Belikaidis, Ioannis-Prodromos; Vlacheas, Panagiotis; Kelaidonis, Dimitrios; Kosmatos, Evangelos; Kotrotsos, Serafim; Vassaki, Stavroula; Kritikou, Yiouli; Demestichas, Panagiotis

2017-01-01

This deliverable contains a detailed description of the use cases considered in SPEED-5G, which will be used as a basis for demonstration in project. These use cases are Dynamic Channel selection, Load balancing, carrier aggregation. This deliverable also explains the SPEED-5G architecture design principles, which is based on software-defined networking and network function virtualisation. The degree of virtualisation is further illustrated by a number of novel contributions from involved par...

Influence of 3D printing on transport : a theory and experts judgment based conceptual model

NARCIS (Netherlands)

Boon, Wouter; Van Wee, Bert

2017-01-01

Consumer 3D printing is on the rise and has the potential to significantly change the transport and logistics sector. Current literature on 3D printing and transport studies does not provide a systematic model of the impact of 3D printing on transport and related (policy relevant) areas, such as

SU-G-BRC-02: A Novel Multi-Criteria Optimization Approach to Generate Deliverable Intensity-Modulated Radiation Therapy (IMRT) Treatment Plans

Energy Technology Data Exchange (ETDEWEB)

Kirlik, G; D’Souza, W; Zhang, H [University of Maryland School of Medicine, Baltimore, MD (United States)

2016-06-15

Purpose: To present a novel multi-criteria optimization (MCO) solution approach that generates treatment plans with deliverable apertures using column generation. Methods: We demonstrate our method with 10 locally advanced head-and-neck cancer cases retrospectively. In our MCO formulation, we defined an objective function for each structure in the treatment volume. This resulted in 9 objective functions, including 3 distinct objectives for primary target volume, high-risk and low-risk target volumes, 5 objectives for each of the organs-at-risk (OARs) (two parotid glands, spinal cord, brain stem and oral cavity), and one for the non-target non-OAR normal tissue. Conditional value-at-risk (CVaR) constraints were utilized to ensure at least certain fraction of the target volumes receiving the prescription doses. To directly generate deliverable plans, column generation algorithm was embedded within our MCO approach for aperture shape generation. Final dose distributions for all plans were generated using a Monte Carlo kernel-superposition dose calculation. We compared the MCO plans with the clinical plans, which were created by clinicians. Results: At least 95% target coverage was achieved by both MCO plans and clinical plans. However, the average conformity indices of clinical plans and the MCO plans were 1.95 and 1.35, respectively (31% reduction, p<0.01). Compared to the conventional clinical plan, the proposed MCO method achieved average reductions in left parotid mean dose of 5% (p=0.06), right parotid mean dose of 18% (p<0.01), oral cavity mean dose of 21% (p=0.03), spinal cord maximum dose of 20% (p<0.01), brain stem maximum dose of 61% (p<0.01), and normal tissue maximum dose of 5% (p<0.01), respectively. Conclusion: We demonstrated that the proposed MCO method was able to obtain deliverable IMRT treatment plans while achieving significant improvements in dosimetric plan quality.

Printing Insecurity? The Security Implications of 3D-Printing of Weapons.

Science.gov (United States)

Walther, Gerald

2015-12-01

In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the U.S. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing technology and 3D guns. It argues that current arms control and transfer policies are adequate to cover 3D-printed guns as well. However, while this analysis may hold up currently, progress in printing technology needs to be monitored to deal with future dangers pre-emptively.

3D Integration for Superconducting Qubits

Science.gov (United States)

Rosenberg, Danna; Kim, David; Yost, Donna-Ruth; Mallek, Justin; Yoder, Jonilyn; Das, Rabindra; Racz, Livia; Hover, David; Weber, Steven; Kerman, Andrew; Oliver, William

Superconducting qubits are a prime candidate for constructing a large-scale quantum processor due to their lithographic scalability, speed, and relatively long coherence times. Moving beyond the few qubit level, however, requires the use of a three-dimensional approach for routing control and readout lines. 3D integration techniques can be used to construct a structure where the sensitive qubits are shielded from a potentially-lossy readout and interconnect chip by an intermediate chip with through-substrate vias, with indium bump bonds providing structural support and electrical conductivity. We will discuss our work developing 3D-integrated coupled qubits, focusing on the characterization of 3D integration components and the effects on qubit performance and design. This research was funded by the Office of the Director of National Intelligence (ODNI), Intelligence Advanced Research Projects Activity (IARPA) via MIT Lincoln Laboratory under Air Force Contract No. FA8721-05-C-0002. The views and conclusions contained herein are those of the authors and should not be interpreted as necessarily representing the official policies or endorsements, either expressed or implied, of ODNI, IARPA, or the US Government.

3D DIGITAL CADASTRE JOURNEY IN VICTORIA, AUSTRALIA

Directory of Open Access Journals (Sweden)

D. Shojaei

2017-10-01

Full Text Available Land development processes today have an increasing demand to access three-dimensional (3D spatial information. Complex land development may need to have a 3D model and require some functions which are only possible using 3D data. Accordingly, the Intergovernmental Committee on Surveying and Mapping (ICSM, as a national body in Australia provides leadership, coordination and standards for surveying, mapping and national datasets has developed the Cadastre 2034 strategy in 2014. This strategy has a vision to develop a cadastral system that enables people to readily and confidently identify the location and extent of all rights, restrictions and responsibilities related to land and real property. In 2014, the land authority in the state of Victoria, Australia, namely Land Use Victoria (LUV, has entered the challenging area of designing and implementing a 3D digital cadastre focused on providing more efficient and effective services to the land and property industry. LUV has been following the ICSM 2034 strategy which requires developing various policies, standards, infrastructures, and tools. Over the past three years, LUV has mainly focused on investigating the technical aspect of a 3D digital cadastre. This paper provides an overview of the 3D digital cadastre investigation progress in Victoria and discusses the challenges that the team faced during this journey. It also addresses the future path to develop an integrated 3D digital cadastre in Victoria.

Case study: Beauty and the Beast 3D: benefits of 3D viewing for 2D to 3D conversion

Science.gov (United States)

Handy Turner, Tara

2010-02-01

From the earliest stages of the Beauty and the Beast 3D conversion project, the advantages of accurate desk-side 3D viewing was evident. While designing and testing the 2D to 3D conversion process, the engineering team at Walt Disney Animation Studios proposed a 3D viewing configuration that not only allowed artists to "compose" stereoscopic 3D but also improved efficiency by allowing artists to instantly detect which image features were essential to the stereoscopic appeal of a shot and which features had minimal or even negative impact. At a time when few commercial 3D monitors were available and few software packages provided 3D desk-side output, the team designed their own prototype devices and collaborated with vendors to create a "3D composing" workstation. This paper outlines the display technologies explored, final choices made for Beauty and the Beast 3D, wish-lists for future development and a few rules of thumb for composing compelling 2D to 3D conversions.

Discrepancies between selected Pareto optimal plans and final deliverable plans in radiotherapy multi-criteria optimization.

Science.gov (United States)

Kyroudi, Archonteia; Petersson, Kristoffer; Ghandour, Sarah; Pachoud, Marc; Matzinger, Oscar; Ozsahin, Mahmut; Bourhis, Jean; Bochud, François; Moeckli, Raphaël

2016-08-01

Multi-criteria optimization provides decision makers with a range of clinical choices through Pareto plans that can be explored during real time navigation and then converted into deliverable plans. Our study shows that dosimetric differences can arise between the two steps, which could compromise the clinical choices made during navigation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

International Nuclear Information System (INIS)

Appel, Gordon John

2016-01-01

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

Assessment Report Sandia National Laboratories Fuel Cycle Technologies Quality Assurance Evaluation of FY15 SNL FCT M2 Milestone Deliverables

Energy Technology Data Exchange (ETDEWEB)

Appel, Gordon John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-05-01

Sandia National Laboratories (SNL) Fuel Cycle Technologies (FCT) program activities are conducted in accordance with FCT Quality Assurance Program Document (FCT-QAPD) requirements. The FCT-QAPD interfaces with SNL approved Quality Assurance Program Description (SNL-QAPD) as explained in the Sandia National Laboratories QA Program Interface Document for FCT Activities (Interface Document). This plan describes SNL's FY16 assessment of SNL's FY15 FCT M2 milestone deliverable's compliance with program QA requirements, including SNL R&A requirements. The assessment is intended to confirm that SNL's FY15 milestone deliverables contain the appropriate authenticated review documentation and that there is a copy marked with SNL R&A numbers.

The optimal time path of clean energy R&D policy when patents have finite lifetime

NARCIS (Netherlands)

Gerlagh, R.; Kverndokk, S.; Rosendahl, K.E.

We study the optimal time path for clean energy innovation policy. In a model with emission reduction through clean energy deployment, and with R&D increasing the overall productivity of clean energy, we describe optimal R&D policies jointly with emission pricing policies. We find that while

Refined 3d-3d correspondence

Energy Technology Data Exchange (ETDEWEB)

Alday, Luis F.; Genolini, Pietro Benetti; Bullimore, Mathew; Loon, Mark van [Mathematical Institute, University of Oxford, Andrew Wiles Building,Radcliffe Observatory Quarter, Woodstock Road, Oxford, OX2 6GG (United Kingdom)

2017-04-28

We explore aspects of the correspondence between Seifert 3-manifolds and 3d N=2 supersymmetric theories with a distinguished abelian flavour symmetry. We give a prescription for computing the squashed three-sphere partition functions of such 3d N=2 theories constructed from boundary conditions and interfaces in a 4d N=2{sup ∗} theory, mirroring the construction of Seifert manifold invariants via Dehn surgery. This is extended to include links in the Seifert manifold by the insertion of supersymmetric Wilson-’t Hooft loops in the 4d N=2{sup ∗} theory. In the presence of a mass parameter for the distinguished flavour symmetry, we recover aspects of refined Chern-Simons theory with complex gauge group, and in particular construct an analytic continuation of the S-matrix of refined Chern-Simons theory.

R and D Subsidies and Climate Policy. Is There a 'Free Lunch'?

International Nuclear Information System (INIS)

Popp, D.

2006-01-01

Because of the long-term nature of the climate problem, technological advances are often seen as an important component of any solution. However, when considering the potential for technology to help solve the climate problem, two market failures exist which lead to underinvestment in climate-friendly R and D: environmental externalities and the public goods nature of new knowledge. As a result, government subsidies to climate-friendly R and D projects are often proposed as part of a policy solution. Using the ENTICE model, I analyze the effectiveness of such subsidies, both with and without other climate policies, such as a carbon tax. While R and D subsidies do lead to significant increases in climate-friendly R and D, this R and D has little impact on the climate itself. Subsidies address the problem of knowledge as a public good, but they do not address the environmental externality, and thus offer no additional incentive to adopt new technologies. Moreover, high opportunity costs to R and D limit the potential role that subsidies can play. While R and D subsidies can improve efficiency, policies that directly affect the environmental externality have a much larger impact on both atmospheric temperature and economic welfare

YouDash3D: exploring stereoscopic 3D gaming for 3D movie theaters

Science.gov (United States)

Schild, Jonas; Seele, Sven; Masuch, Maic

2012-03-01

Along with the success of the digitally revived stereoscopic cinema, events beyond 3D movies become attractive for movie theater operators, i.e. interactive 3D games. In this paper, we present a case that explores possible challenges and solutions for interactive 3D games to be played by a movie theater audience. We analyze the setting and showcase current issues related to lighting and interaction. Our second focus is to provide gameplay mechanics that make special use of stereoscopy, especially depth-based game design. Based on these results, we present YouDash3D, a game prototype that explores public stereoscopic gameplay in a reduced kiosk setup. It features live 3D HD video stream of a professional stereo camera rig rendered in a real-time game scene. We use the effect to place the stereoscopic effigies of players into the digital game. The game showcases how stereoscopic vision can provide for a novel depth-based game mechanic. Projected trigger zones and distributed clusters of the audience video allow for easy adaptation to larger audiences and 3D movie theater gaming.

Good Practice Policy Framework for Energy Technology Research Development and Demonstration (RD and D)

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

The transition to a low carbon economy clearly requires accelerating energy innovation and technology adoption. Governments have an important role in this context. They can help by establishing the enabling environment in which innovation can thrive, and within which effective and efficient policies can be identified, with the specific goal of advancing research, development, demonstration and, ultimately, deployment (RDD&D) of clean energy technologies. At the front end of the innovation process, significant increases in, and restructuring of, global RD&D efforts will be required, combined with well-targeted government RD&D policies. The development of a clear policy framework for energy technology RD&D, based on good practices, should include six elements: Coherent energy RD&D strategy and priorities; Adequate government RD&D funding and policy support; Co-ordinated energy RD&D governance; Strong collaborative approach, engaging industry through public private partnerships (PPPs); Effective RD&D monitoring and evaluation; and Strategic international collaboration. While countries have been favouring certain technologies over others, based on decisions on which areas are to receive funding, clear priorities are not always determined through structured analysis and documented processes. A review of stated energy RD&D priorities, based on announced technology programmes and strategies, and recent spending trends reveals some important deviations from stated priorities and actual RD&D funding.

Clinician-scientist MB/PhD training in the UK: a nationwide survey of medical school policy.

Science.gov (United States)

Barnett-Vanes, Ashton; Ho, Guiyi; Cox, Timothy M

2015-12-30

This study surveyed all UK medical schools regarding their Bachelor of Medicine (MB), Doctor of Philosophy (PhD) (MB/PhD) training policy in order to map the current training landscape and to provide evidence for further research and policy development. Deans of all UK medical schools registered with the Medical Schools Council were invited to participate in this survey electronically. The number of medical schools that operate institutional MB/PhD programmes or permit self-directed student PhD intercalation. Medical school recruitment procedures and attitudes to policy guidance. 27 of 33 (81%) registered UK medical schools responded. Four (14%) offer an institutional MB/PhD programme. However, of those without institutional programmes, 17 (73%) permit study interruption and PhD intercalation: two do not (one of whom had discontinued their programme in 2013), three were unsure and one failed to answer the question. Regarding student eligibility, respondents cited high academic achievement in medical studies and a bachelor's or master's degree. Of the Medical schools without institutional MB/PhD programmes, 5 (21%) have intentions to establish a programme, 8 (34%) do not and 3 were unsure, seven did not answer. 19 medical schools (70%) considered national guidelines are needed for future MB/PhD programme development. We report the first national survey of MB/PhD training in the UK. Four medical schools have operational institutional MB/PhD programmes, with a further five intending to establish one. Most medical schools permit study interruption and PhD intercalation. The total number MB/PhD students yet to graduate from medical school could exceed 150, with 30 graduating per year. A majority of medical school respondents to this survey believe national guidelines are required for MB/PhD programme development and implementation. Further research should focus on the MB/PhD student experience. Discussion regarding local and national MB/PhD policies between medical

3D-mallien muokkaus 3D-tulostamista varten CAD-ohjelmilla

OpenAIRE

Lehtimäki, Jarmo

2013-01-01

Insinöörityössäni käsitellään 3D-mallien tulostamista ja erityisesti 3D-mallien mallintamista niin, että kappaleiden valmistaminen 3D-tulostimella onnistuisi mahdollisimman hyvin. Työ tehtiin Prohoc Oy:lle, joka sijaitsee Vaasassa. 3D-tulostuspalveluun tuli jatkuvasti 3D-malleja, joiden tulostuksessa oli ongelmia. Työssäni tutkin näiden ongelmien syntyä ja tein ohjeita eri 3D-mallinnusohjelmille, joiden tarkoituksena on auttaa tekemään helpommin tulostettavia 3D-malleja. Työhön kuului myös et...

3D imaging, 3D printing and 3D virtual planning in endodontics.

Science.gov (United States)

Shah, Pratik; Chong, B S

2018-03-01

The adoption and adaptation of recent advances in digital technology, such as three-dimensional (3D) printed objects and haptic simulators, in dentistry have influenced teaching and/or management of cases involving implant, craniofacial, maxillofacial, orthognathic and periodontal treatments. 3D printed models and guides may help operators plan and tackle complicated non-surgical and surgical endodontic treatment and may aid skill acquisition. Haptic simulators may assist in the development of competency in endodontic procedures through the acquisition of psycho-motor skills. This review explores and discusses the potential applications of 3D printed models and guides, and haptic simulators in the teaching and management of endodontic procedures. An understanding of the pertinent technology related to the production of 3D printed objects and the operation of haptic simulators are also presented.

A 3d-3d appetizer

Energy Technology Data Exchange (ETDEWEB)

Pei, Du; Ye, Ke [Walter Burke Institute for Theoretical Physics, California Institute of Technology, Pasadena, CA, 91125 (United States)

2016-11-02

We test the 3d-3d correspondence for theories that are labeled by Lens spaces. We find a full agreement between the index of the 3d N=2 “Lens space theory” T[L(p,1)] and the partition function of complex Chern-Simons theory on L(p,1). In particular, for p=1, we show how the familiar S{sup 3} partition function of Chern-Simons theory arises from the index of a free theory. For large p, we find that the index of T[L(p,1)] becomes a constant independent of p. In addition, we study T[L(p,1)] on the squashed three-sphere S{sub b}{sup 3}. This enables us to see clearly, at the level of partition function, to what extent G{sub ℂ} complex Chern-Simons theory can be thought of as two copies of Chern-Simons theory with compact gauge group G.

Final Report on Pilot Studies / Final Report on Classroom Research with STEM and TESL Assessment

DEFF Research Database (Denmark)

Biel, Carmen; Wake, Jo Dugstad; Hesse, Friedrich

This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables.......This Deliverable is the final report on pilot studies within the NEXT-TELL project (D6.7) and furthermore comprises the Deliverable on Classroom Research with STEM and TESL Assessment (D2.9) in order to avoid redundancies between those two Deliverables....

Quasi 3D dosimetry (EPID, conventional 2D/3D detector matrices)

International Nuclear Information System (INIS)

Bäck, A

2015-01-01

Patient specific pretreatment measurement for IMRT and VMAT QA should preferably give information with a high resolution in 3D. The ability to distinguish complex treatment plans, i.e. treatment plans with a difference between measured and calculated dose distributions that exceeds a specified tolerance, puts high demands on the dosimetry system used for the pretreatment measurements and the results of the measurement evaluation needs a clinical interpretation. There are a number of commercial dosimetry systems designed for pretreatment IMRT QA measurements. 2D arrays such as MapCHECK ® (Sun Nuclear), MatriXX Evolution (IBA Dosimetry) and OCTAVIOUS ® 1500 (PTW), 3D phantoms such as OCTAVIUS ® 4D (PTW), ArcCHECK ® (Sun Nuclear) and Delta 4 (ScandiDos) and software for EPID dosimetry and 3D reconstruction of the dose in the patient geometry such as EPIDose TM (Sun Nuclear) and Dosimetry Check TM (Math Resolutions) are available. None of those dosimetry systems can measure the 3D dose distribution with a high resolution (full 3D dose distribution). Those systems can be called quasi 3D dosimetry systems. To be able to estimate the delivered dose in full 3D the user is dependent on a calculation algorithm in the software of the dosimetry system. All the vendors of the dosimetry systems mentioned above provide calculation algorithms to reconstruct a full 3D dose in the patient geometry. This enables analyzes of the difference between measured and calculated dose distributions in DVHs of the structures of clinical interest which facilitates the clinical interpretation and is a promising tool to be used for pretreatment IMRT QA measurements. However, independent validation studies on the accuracy of those algorithms are scarce. Pretreatment IMRT QA using the quasi 3D dosimetry systems mentioned above rely on both measurement uncertainty and accuracy of calculation algorithms. In this article, these quasi 3D dosimetry systems and their use in patient specific

3D MR cisternography to identify distal dural rings. Comparison of 3D-CISS and 3D-SPACE sequences

International Nuclear Information System (INIS)

Watanabe, Yoshiyuki; Makidono, Akari; Nakamura, Miho; Saida, Yukihisa

2011-01-01

The distal dural ring (DDR) is an anatomical landmark used to distinguish intra- and extradural aneurysms. We investigated identification of the DDR using 2 three-dimensional (3D) magnetic resonance (MR) cisternography sequences-3D constructive interference in steady state (CISS) and 3D sampling perfection with application optimized contrasts using different flip angle evolutions (SPACE)-at 3.0 tesla. Ten healthy adult volunteers underwent imaging with 3D-CISS, 3D-SPACE, and time-of-flight (TOF) MR angiography (TOF-MRA) sequences at 3.0T. We analyzed DDR identification and internal carotid artery (ICA) signal intensity and classified the shape of the carotid cave. We identified the DDR using both 3D-SPACE and 3D-CISS, with no significant difference between the sequences. Visualization of the outline of the ICA in the cavernous sinus (CS) was significantly clearer with 3D-SPACE than 3D-CISS. In the CS and petrous portions, signal intensity was lower with 3D-SPACE, and the flow void was poor with 3D-CISS in some subjects. We identified the DDR with both 3D-SPACE and 3D-CISS, but the superior contrast of the ICA in the CS using 3D-SPACE suggests the superiority of this sequence for evaluating the DDR. (author)

3D video

CERN Document Server

Lucas, Laurent; Loscos, Céline

2013-01-01

While 3D vision has existed for many years, the use of 3D cameras and video-based modeling by the film industry has induced an explosion of interest for 3D acquisition technology, 3D content and 3D displays. As such, 3D video has become one of the new technology trends of this century.The chapters in this book cover a large spectrum of areas connected to 3D video, which are presented both theoretically and technologically, while taking into account both physiological and perceptual aspects. Stepping away from traditional 3D vision, the authors, all currently involved in these areas, provide th

3D composite image, 3D MRI, 3D SPECT, hydrocephalus

International Nuclear Information System (INIS)

Mito, T.; Shibata, I.; Sugo, N.; Takano, M.; Takahashi, H.

2002-01-01

The three-dimensional (3D)SPECT imaging technique we have studied and published for the past several years is an analytical tool that permits visual expression of the cerebral circulation profile in various cerebral diseases. The greatest drawback of SPECT is that the limitation on precision of spacial resolution makes intracranial localization impossible. In 3D SPECT imaging, intracranial volume and morphology may vary with the threshold established. To solve this problem, we have produced complimentarily combined SPECT and helical-CT 3D images by means of general-purpose visualization software for intracranial localization. In hydrocephalus, however, the key subject to be studied is the profile of cerebral circulation around the ventricles of the brain. This suggests that, for displaying the cerebral ventricles in three dimensions, CT is a difficult technique whereas MRI is more useful. For this reason, we attempted to establish the profile of cerebral circulation around the cerebral ventricles by the production of combined 3D images of SPECT and MRI. In patients who had shunt surgery for hydrocephalus, a difference between pre- and postoperative cerebral circulation profiles was assessed by a voxel distribution curve, 3D SPECT images, and combined 3D SPECT and MRI images. As the shunt system in this study, an Orbis-Sigma valve of the automatic cerebrospinal fluid volume adjustment type was used in place of the variable pressure type Medos valve currently in use, because this device requires frequent changes in pressure and a change in pressure may be detected after MRI procedure. The SPECT apparatus used was PRISM3000 of the three-detector type, and 123I-IMP was used as the radionuclide in a dose of 222 MBq. MRI data were collected with an MAGNEXa+2 with a magnetic flux density of 0.5 tesla under the following conditions: field echo; TR 50 msec; TE, 10 msec; flip, 30ueK; 1 NEX; FOV, 23 cm; 1-mm slices; and gapless. 3D images are produced on the workstation TITAN

3D Printing and 3D Bioprinting in Pediatrics.

Science.gov (United States)

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-07-13

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics.

3D Printing and 3D Bioprinting in Pediatrics

OpenAIRE

Vijayavenkataraman, Sanjairaj; Fuh, Jerry Y H; Lu, Wen Feng

2017-01-01

Additive manufacturing, commonly referred to as 3D printing, is a technology that builds three-dimensional structures and components layer by layer. Bioprinting is the use of 3D printing technology to fabricate tissue constructs for regenerative medicine from cell-laden bio-inks. 3D printing and bioprinting have huge potential in revolutionizing the field of tissue engineering and regenerative medicine. This paper reviews the application of 3D printing and bioprinting in the field of pediatrics.

A microfluidic device for 2D to 3D and 3D to 3D cell navigation

International Nuclear Information System (INIS)

Shamloo, Amir; Amirifar, Leyla

2016-01-01

Microfluidic devices have received wide attention and shown great potential in the field of tissue engineering and regenerative medicine. Investigating cell response to various stimulations is much more accurate and comprehensive with the aid of microfluidic devices. In this study, we introduced a microfluidic device by which the matrix density as a mechanical property and the concentration profile of a biochemical factor as a chemical property could be altered. Our microfluidic device has a cell tank and a cell culture chamber to mimic both 2D to 3D and 3D to 3D migration of three types of cells. Fluid shear stress is negligible on the cells and a stable concentration gradient can be obtained by diffusion. The device was designed by a numerical simulation so that the uniformity of the concentration gradients throughout the cell culture chamber was obtained. Adult neural cells were cultured within this device and they showed different branching and axonal navigation phenotypes within varying nerve growth factor (NGF) concentration profiles. Neural stem cells were also cultured within varying collagen matrix densities while exposed to NGF concentrations and they experienced 3D to 3D collective migration. By generating vascular endothelial growth factor concentration gradients, adult human dermal microvascular endothelial cells also migrated in a 2D to 3D manner and formed a stable lumen within a specific collagen matrix density. It was observed that a minimum absolute concentration and concentration gradient were required to stimulate migration of all types of the cells. This device has the advantage of changing multiple parameters simultaneously and is expected to have wide applicability in cell studies. (paper)

3D game environments create professional 3D game worlds

CERN Document Server

Ahearn, Luke

2008-01-01

The ultimate resource to help you create triple-A quality art for a variety of game worlds; 3D Game Environments offers detailed tutorials on creating 3D models, applying 2D art to 3D models, and clear concise advice on issues of efficiency and optimization for a 3D game engine. Using Photoshop and 3ds Max as his primary tools, Luke Ahearn explains how to create realistic textures from photo source and uses a variety of techniques to portray dynamic and believable game worlds.From a modern city to a steamy jungle, learn about the planning and technological considerations for 3D modelin

Plasma and milk concentrations of vitamin D3 and 25-hydroxy vitamin D3 following intravenous injection of vitamin D3 or 25-hydroxy vitamin D3.

OpenAIRE

Hidiroglou, M; Knipfel, J E

1984-01-01

Plasma levels of vitamin D3 or 25-hydroxyvitamin D3 in ewes after administration of a single massive intravenous dose of vitamin D3 (2 X 10(6) IU) or 25-hydroxy vitamin D3 (5 mg) were determined at zero, one, two, three, five, ten and 20 days postinjection. In six ewes injected with vitamin D3 conversion of vitamin D3 to 25-hydroxy vitamin D3 resulted in a six-fold increase in the plasma 25-hydroxy vitamin D3 level within one day. Elevated levels were maintained until day 10 but by day 20 a s...

Final Report Extreme Computing and U.S. Competitiveness DOE Award. DE-FG02-11ER26087/DE-SC0008764

Energy Technology Data Exchange (ETDEWEB)

Mustain, Christopher J. [Council on Competitiveness, Washington, DC (United States)

2016-01-13

The Council has acted on each of the grant deliverables during the funding period. The deliverables are: (1) convening the Council’s High Performance Computing Advisory Committee (HPCAC) on a bi-annual basis; (2) broadening public awareness of high performance computing (HPC) and exascale developments; (3) assessing the industrial applications of extreme computing; and (4) establishing a policy and business case for an exascale economy.

Dosimetric quality, accuracy, and deliverability of modulated radiotherapy treatments for spinal metastases

Energy Technology Data Exchange (ETDEWEB)

Kairn, Tanya, E-mail: t.kairn@gmail.com [Genesis Cancer Care Queensland, Auchenflower (Australia); School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane (Australia); Papworth, Daniel [Genesis Cancer Care Queensland, Auchenflower (Australia); Crowe, Scott B. [School of Chemistry, Physics, and Mechanical Engineering, Queensland University of Technology, Brisbane (Australia); Cancer Care Services, Royal Brisbane and Women' s Hospital, Herston (Australia); Anderson, Jennifer [Genesis Cancer Care Queensland, Auchenflower (Australia); Christie, David R.H. [Genesis Cancer Care Queensland, Auchenflower (Australia); School of Medicine, Bond University, Robina (Australia)

2016-10-01

Cancer often metastasizes to the vertebra, and such metastases can be treated successfully using simple, static posterior or opposed-pair radiation fields. However, in some cases, including when re-irradiation is required, spinal cord avoidance becomes necessary and more complex treatment plans must be used. This study evaluated 16 sample intensity-modulated radiation therapy (IMRT) and volumetric-modulated arc therapy (VMAT) treatment plans designed to treat 6 typical vertebral and paraspinal volumes using a standard prescription, with the aim of investigating the advantages and limitations of these treatment techniques and providing recommendations for their optimal use in vertebral treatments. Treatment plan quality and beam complexity metrics were evaluated using the Treatment And Dose Assessor (TADA) code. A portal-imaging–based quality assurance (QA) system was used to evaluate treatment delivery accuracy, and radiochromic film measurements were used to provide high-resolution verification of treatment plan dose accuracy, especially in the steep dose gradient regions between each vertebral target and spinal cord. All treatment modalities delivered approximately the same doses and the same levels of dose heterogeneity to each planning target volume (PTV), although the minimum PTV doses in the vertebral plans were substantially lower than the prescription, because of the requirement that the plans meet a strict constraint on the dose to the spinal cord and cord planning risk volume (PRV). All plans met required dose constraints on all organs at risk, and all measured PTV-cord dose gradients were steeper than planned. Beam complexity analysis suggested that the IMRT treatment plans were more deliverable (less complex, leading to greater QA success) than the VMAT treatment plans, although the IMRT plans also took more time to deliver. The accuracy and deliverability of VMAT treatment plans were found to be substantially increased by limiting the number of

32 CFR 14.3 - Policies and procedures.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Policies and procedures. 14.3 Section 14.3... QUALIFICATION OF CIVILIAN DEFENSE COUNSEL § 14.3 Policies and procedures. (a) Application procedures. (1... the subject of any sanction or disciplinary action by any court, bar, or other competent governmental...

3-D Whole-Core Transport Calculation with 3D/2D Rotational Plane Slicing Method

Energy Technology Data Exchange (ETDEWEB)

Yoo, Han Jong; Cho, Nam Zin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2014-10-15

Use of the method of characteristics (MOC) is very popular due to its capability of heterogeneous geometry treatment and widely used for 2-D core calculation, but direct extension of MOC to 3-D core is not so attractive due to huge calculational cost. 2-D/1-D fusion method was very successful for 3-D calculation of current generation reactor types (highly heterogeneous in radial direction but piece-wise homogeneous in axial direction). In this paper, 2-D MOC concept is extended to 3-D core calculation with little modification of an existing 2-D MOC code. The key idea is to suppose 3-D geometry as a set of many 2-D planes like a phone-directory book. Dividing 3-D structure into a large number of 2-D planes and solving each plane with a simple 2-D SN transport method would give the solution of a 3-D structure. This method was developed independently at KAIST but it is found that this concept is similar with that of 'plane tracing' in the MCCG-3D code. The method developed was tested on the 3-D C5G7 OECD/NEA benchmark problem and compared with the 2-D/1-D fusion method. Results show that the proposed method is worth investigating further. A new approach to 3-D whole-core transport calculation is described and tested. By slicing 3-D structure along characteristic planes and solving each 2-D plane problem, we can get 3-D solution. The numerical test results indicate that the new method is comparable with the 2D/1D fusion method and outperforms other existing methods. But more fair comparison should be done in similar discretization level.

From 2D to 3D turbulence through 2D3C configurations

Science.gov (United States)

Buzzicotti, Michele; Biferale, Luca; Linkmann, Moritz

2017-11-01

We study analytically and numerically the geometry of the nonlinear interactions and the resulting energy transfer directions of 2D3C flows. Through a set of suitably designed Direct Numerical Simulations we also study the coupling between several 2D3C flows, where we explore the transition between 2D and fully 3D turbulence. In particular, we find that the coupling of three 2D3C flows on mutually orthogonal planes subject to small-scale forcing leads to a stationary 3D out-of-equilibrium dynamics at the energy containing scales where the inverse cascade is directly balanced by a forward cascade carried by a different subsets of interactions. ERC AdG Grant No 339032 NewTURB.

3D Space Shift from CityGML LoD3-Based Multiple Building Elements to a 3D Volumetric Object

Directory of Open Access Journals (Sweden)

Shen Ying

2017-01-01

Full Text Available In contrast with photorealistic visualizations, urban landscape applications, and building information system (BIM, 3D volumetric presentations highlight specific calculations and applications of 3D building elements for 3D city planning and 3D cadastres. Knowing the precise volumetric quantities and the 3D boundary locations of 3D building spaces is a vital index which must remain constant during data processing because the values are related to space occupation, tenure, taxes, and valuation. To meet these requirements, this paper presents a five-step algorithm for performing a 3D building space shift. This algorithm is used to convert multiple building elements into a single 3D volumetric building object while maintaining the precise volume of the 3D space and without changing the 3D locations or displacing the building boundaries. As examples, this study used input data and building elements based on City Geography Markup Language (CityGML LoD3 models. This paper presents a method for 3D urban space and 3D property management with the goal of constructing a 3D volumetric object for an integral building using CityGML objects, by fusing the geometries of various building elements. The resulting objects possess true 3D geometry that can be represented by solid geometry and saved to a CityGML file for effective use in 3D urban planning and 3D cadastres.

Shuttle orbiter Ku-band radar/communications system design evaluation. Deliverable test equipment evaluation

Science.gov (United States)

Maronde, R. G.

1980-07-01

The Ku-band test equipment, known as the Deliverable System Test equipment (DSTE), is reviewed and evaluated. The DSTE is semiautomated and computer programs were generated for 14 communication mode tests and 17 radar mode tests. The 31 test modules provide a good cross section of tests with which to exercise the Ku-band system; however, it is very limited when being used to verify Ku-band system performance. More detailed test descriptions are needed, and a major area of concern is the DSTE sell-off procedure which is inadequate.

Effect of 24,25-dihydroxyvitamin D3 on 1,25-dihydroxyvitamin D3 [1,25-(OH)2D3] metabolism in vitamin D-deficient rats infused with 1,25-(OH)2D3

International Nuclear Information System (INIS)

Yamato, H.; Matsumoto, T.; Fukumoto, S.; Ikeda, K.; Ishizuka, S.; Ogata, E.

1989-01-01

Previous studies revealed that administration of 24,25-dihydroxyvitamin D3 [24,25-(OH)2D3] to calcium (Ca)-deficient rats causes a dose-dependent reduction in markedly elevated serum 1,25-(OH)2D3 level. Although the results suggested that the metabolism of 1,25-(OH)2D3 was accelerated by 24,25-(OH)2D3, those experiments could not define whether the enhanced metabolism of 1,25-(OH)2D3 played a role in the reduction in the serum 1,25-(OH)2D3 level. In the present study, in order to address this issue more specifically, serum 1,25-(OH)2D3 was maintained solely by exogenous administration through miniosmotic pumps of 1,25-(OH)2D3 into vitamin D-deficient rats. Thus, by measuring the serum 1,25-(OH)2D3 concentration, the effect of 24,25-(OH)2D3 on the MCR of 1,25-(OH)2D3 could be examined. Administration of 24,25-(OH)2D3 caused a dose-dependent enhancement in the MCR of 1,25-(OH)2D3, and 1 microgram/100 g rat.day 24,25-(OH)2D3, which elevated serum 24,25-(OH)2D3 to 8.6 +/- 1.3 ng/ml, significantly increased MCR and suppressed serum levels of 1,25-(OH)2D3. The effect of 24,25-(OH)2D3 on 1,25-(OH)2D3 metabolism developed with a rapid time course, and the recovery of iv injected [1 beta-3H]1,25-(OH)2D3 in blood was significantly reduced within 1 h. In addition, there was an increase in radioactivity in the water-soluble fraction of serum as well as in urine, suggesting that 1,25-(OH)2D3 is rapidly degraded to a water-soluble metabolite(s). Furthermore, the reduction in serum 1,25-(OH)2D3 was associated with a reduction in both serum and urinary Ca levels. Because the conversion of [3H]24,25-(OH)2D3 to [3H]1,24,25-(OH)2D3 or other metabolites was minimal in these rats, 24,25-(OH)2D3 appears to act without being converted into other metabolites. These results demonstrate that 24,25-(OH)2D3 rapidly stimulates the metabolism of 1,25-(OH)2D3 and reduces its serum level

RAG-3D: a search tool for RNA 3D substructures

Science.gov (United States)

Zahran, Mai; Sevim Bayrak, Cigdem; Elmetwaly, Shereef; Schlick, Tamar

2015-01-01

To address many challenges in RNA structure/function prediction, the characterization of RNA's modular architectural units is required. Using the RNA-As-Graphs (RAG) database, we have previously explored the existence of secondary structure (2D) submotifs within larger RNA structures. Here we present RAG-3D—a dataset of RNA tertiary (3D) structures and substructures plus a web-based search tool—designed to exploit graph representations of RNAs for the goal of searching for similar 3D structural fragments. The objects in RAG-3D consist of 3D structures translated into 3D graphs, cataloged based on the connectivity between their secondary structure elements. Each graph is additionally described in terms of its subgraph building blocks. The RAG-3D search tool then compares a query RNA 3D structure to those in the database to obtain structurally similar structures and substructures. This comparison reveals conserved 3D RNA features and thus may suggest functional connections. Though RNA search programs based on similarity in sequence, 2D, and/or 3D structural elements are available, our graph-based search tool may be advantageous for illuminating similarities that are not obvious; using motifs rather than sequence space also reduces search times considerably. Ultimately, such substructuring could be useful for RNA 3D structure prediction, structure/function inference and inverse folding. PMID:26304547

Determination of the 3d34d and 3d35s configurations of Fe V

International Nuclear Information System (INIS)

Azarov, V.I.

2001-01-01

The analysis of the spectrum of four times ionized iron, Fe V, has led to the determination of the 3d 3 4d and 3d 3 5s configurations. From 975 classified lines in the region 645-1190 A we have established 123 of 168 theoretically possible 3d 3 4d levels and 26 of 38 possible 3d 3 5s levels. The estimated accuracy of values of energy levels of these two configurations is about 0.7 cm -1 and 1.0 cm -1 , respectively. The level structure of the system of the 3d 4 , 3d 3 4s, 3d 3 4d and 3d 3 5s configurations has been theoretically interpreted and the energy parameters have been determined by a least squares fit to the observed levels. A comparison of parameters in Cr III and Fe V ions is given. (orig.)

'Archers' of the Blessed City: City's Deliverance in the Coinage of Early Hellenistic Olbia

DEFF Research Database (Denmark)

Stolba, Vladimir

2015-01-01

Despite continuous and thorough studies of Olbian coinage, the chronology of some coin series produced by this Pontic city and the messages communicated by their types remain obscure. One such controversial issue, standing out from the total mass, is the so-called ‘archers’, the early Hellenistic...... with the major turning point in the city’s history, namely its deliverance from the siege laid by Macedonian troops in the course of Zopyrion’s campaign against the Scythians around 331 BC....

Axionic D3-D7 Inflation

CERN Document Server

Burgess, C P; Postma, M

2009-01-01

We study the motion of a D3 brane moving within a Type IIB string vacuum compactified to 4D on K3 x T_2/Z_2 in the presence of D7 and O7 planes. We work within the effective 4D supergravity describing how the mobile D3 interacts with the lightest bulk moduli of the compactification, including the effects of modulus-stabilizing fluxes. We seek inflationary solutions to the resulting equations, performing our search numerically in order to avoid resorting to approximate parameterizations of the low-energy potential. We consider uplifting from D-terms and from the supersymmetry-breaking effects of anti-D3 branes. We find examples of slow-roll inflation (with anti-brane uplifting) with the mobile D3 moving along the toroidal directions, falling towards a D7-O7 stack starting from the antipodal point. The inflaton turns out to be a linear combination of the brane position and the axionic partner of the K3 volume modulus, and the similarity of the potential along the inflaton direction with that of racetrack inflat...

3D Volume Rendering and 3D Printing (Additive Manufacturing).

Science.gov (United States)

Katkar, Rujuta A; Taft, Robert M; Grant, Gerald T

2018-07-01

Three-dimensional (3D) volume-rendered images allow 3D insight into the anatomy, facilitating surgical treatment planning and teaching. 3D printing, additive manufacturing, and rapid prototyping techniques are being used with satisfactory accuracy, mostly for diagnosis and surgical planning, followed by direct manufacture of implantable devices. The major limitation is the time and money spent generating 3D objects. Printer type, material, and build thickness are known to influence the accuracy of printed models. In implant dentistry, the use of 3D-printed surgical guides is strongly recommended to facilitate planning and reduce risk of operative complications. Copyright © 2018 Elsevier Inc. All rights reserved.

3D object-oriented image analysis in 3D geophysical modelling

DEFF Research Database (Denmark)

Fadel, I.; van der Meijde, M.; Kerle, N.

2015-01-01

Non-uniqueness of satellite gravity interpretation has traditionally been reduced by using a priori information from seismic tomography models. This reduction in the non-uniqueness has been based on velocity-density conversion formulas or user interpretation of the 3D subsurface structures (objects......) based on the seismic tomography models and then forward modelling these objects. However, this form of object-based approach has been done without a standardized methodology on how to extract the subsurface structures from the 3D models. In this research, a 3D object-oriented image analysis (3D OOA......) approach was implemented to extract the 3D subsurface structures from geophysical data. The approach was applied on a 3D shear wave seismic tomography model of the central part of the East African Rift System. Subsequently, the extracted 3D objects from the tomography model were reconstructed in the 3D...

RTD and D to increase the share of renewables in emerging and developing countries with European technologies. Policy Assessment, Stakeholders opinions, Best-practices and Recommendations

International Nuclear Information System (INIS)

Hanekamp, E.

2008-11-01

The future energy demand worldwide will increase by 45% in 2030. To be able to meet this demand, respond to the threats of Climate Change and also improve access to energy for the very poor in emerging and developing countries (especially in rural areas) renewable energy technologies play a crucial role. The European Union envisions a thriving and sustainable future economy, with world leadership in a diverse portfolio of clean, efficient and low-carbon energy technologies as a motor for prosperity and a key contributor to growth and jobs. Strengthening of the international dimension in European Technology Platforms and in Joint Technology Initiatives is a priority in the EU. The demographic trends in Europe coupled with an ambitious strategy of growth based on the Lisbon agenda provide a new context for considering international co-operation in Science and Technology. No fortress Europe, but an open Europe - building open 'win-win' S and T relations with EDCs. The RTD4EDC project is focussed on the role of research, technological development and demonstration (RTD and D) in the implementation of renewable energy technologies in Emerging and Developing Countries (EDCs). The project is executed by a consortium of four partners based in Europe (Belgium/The Netherlands), and in Emerging and Developing Countries (Paraguay, South- Africa and India). The project consisted of desk research on relevant policies and developments, interviews with policymakers, representatives from EU RE industries and development cooperation agencies, a survey amongst EU RE industry representatives and analysis of 74 cases of RE implementations in EDCs. In this report the overall results are presented. Other deliverables are three reports with background material (policies, case studies and market potential for EU RE industry) and a website (www.developingrenewables.org) containing all information as reported and with a database containing the 74 cases of RE implementations in EDCs.

R and D policy of the Hungarian Atomic Energy Authority

International Nuclear Information System (INIS)

Berki, Tamas; Macsuga, Geza; Neubauer, Istvan

2010-01-01

The Hungarian Atomic Energy Authority (HAEA) is authorised by the prescriptions of the law on Atomic Energy to support research and development activities in those scientific and technical areas, which primarily contribute to performing the nuclear safety regulatory responsibility and improving effectiveness and efficiency of licensing, inspection and assessment activities. HAEA's Research and Development program is an essential one: it is run on significant financial resources and with the involvement of a wide range of Technical Support Organisations (TSO). Therefore appropriate priorities have to be applied and directions have to be followed when decisions are made on activities to be supported by the HAEA. These priorities and strategic directions for the R and D activities are defined in the Research and Development Policy of HAEA, which was lastly revised in 2008. The report introduces the summary evaluation and major results of R and D activities sponsored by the HAEA in the previous 2005-2008 cycle and the directions and general elements of the R and D Policy of the ongoing period 2009-2012. (author)

Market Share, R&D Cooperation, and EU Competition Policy

OpenAIRE

Richard Rubble; Bruno Versaevel

2009-01-01

Working Paper GATE 2009-10; Current EU policy exempts horizontal R&D agreements from antitrust con- cerns when the combined market shares of participants are low enough. This paper argues that existing theory does not support limiting the exemption to low market shares. This is done by introducing a set of non-innovating outside firms to the standard framework to assess what link might exist between the market share of innovating firms and the product market benefits of cooperation. With R&D out...

Mediation by Demonstration and Dialogue. An Evaluation of Practices. Deliverable D12

International Nuclear Information System (INIS)

Elam, Mark; Sundqvist, Goeran; Soneryd, Linda

2009-10-01

Two basic forms of mediation have been identified and analysed: the public mediation of radioactive waste management by demonstration and by dialogue. The former coincides firstly with the showing and visualizing radioactive waste management issues and solutions for public inspection and recognition. The latter, on the other hand, corresponds firstly with the establishment of different styles of public discussion, deliberation and inquiry for elaborating further on policy issues and solutions. Both forms of mediation provide the basis for the collection and collation of significant bodies of public evidence and testimony which can be used to continuously inform and guide decision-making processes. Principles and Guidelines of Mediation 1. Both mediation by demonstration and mediation by dialogue should be understood as indispensable in the formation of arenas of risk governance in radioactive waste management. 2. As the two basic forms of mediation each has its own part to play in advancing radioactive waste management solutions, neither one should be automatically privileged over the other in any policy process 3. Both mediation by demonstration and mediation by dialogue can be expected to generate large bodies of public evidence and testimony which can be used to help inform and guide decision-making processes. Historically, evidence deriving from mediation by demonstration has been accorded greater prominence in the radioactive waste management field than evidence deriving from mediation by dialogue. For this reason, new ways of effectively combining evidence and testimony deriving from both forms of mediation should be explored in policy processes in future. 4. Because mediation by demonstration builds upon a clear division between those who demonstrate and those who are being asked to see and evaluate what is being shown, mediation by dialogue should be conceived and constructed as an opportunity to unsettle and destabilize these established roles. 5. Because

IMPACT OF POLICIES AND PUBLIC FINANCING INSTRUMENTS ON R&D INVESTMENTS

Directory of Open Access Journals (Sweden)

Steliana SANDU

2007-06-01

Full Text Available This paper is based on the Romania country review, produced as internal working papers for the research project “Monitoring and analysis of policies and public financing instruments conducive to higher levels of R&D investment”. The aim of the project is to serve as support for policy developments in Europe, notably in the framework of CREST activities. It is running by a consortium of 7 partners:· UNU-MERIT (The Netherlands, consortium leader·Technopolis (The Netherlands· PREST – University of Manchester (United Kingdom· ZEW (Germany· Joanneum Research (Austria· Wiseguys Ltd. (United Kingdom and INTRASOFT International (Luxembourg. Each country review provides expert’s view on the policy mix and its is to provide an exploratory analysis of the current policy mixes in place and detect the most important areas of interactions between instruments as well as new modes of policy governance that are particularly adapted (or detrimental for the building of policy mixes.

Bioclim Deliverable D6a: regional climatic characteristics for the European sites at specific times: the dynamical down-scaling

International Nuclear Information System (INIS)

2003-01-01

many millennia. These results are then interpreted in terms of regional climatic changes using rule-based and statistical down-scaling approaches. This deliverable, D6a, focuses on the hierarchical strategy, and in particular the MAR simulations. According to the hierarchical strategy developed in the BIOCLIM project to predict future climate, six BIOCLIM experiments were run with the MAR model. In addition to these experiments a baseline experiment, presenting the present-day climate simulated by MAR, was also undertaken. In the first step of the hierarchical strategy the LLN 2-D NH climate model simulated the gross features of the climate of the next 1 Myr. Six snapshot experiments were selected from these results. In a second step a GCM and a biosphere model were used to simulate in more detail the climate of the selected time periods. These simulations were performed on a global scale. The third step of the procedure is to derive the regional features of the climate at the same time periods. Therefore the results of the GCM are used as boundary conditions to force the regional climate model (MAR) for the six selected periods and the baseline simulation. The control simulation (baseline) corresponds to the regional climate simulated under present-day conditions, both insolation forcing and atmospheric CO 2 concentration. All the BIOCLIM simulations are compared to that baseline simulation. In addition, other comparisons will also be presented

3D IBFV : Hardware-Accelerated 3D Flow Visualization

NARCIS (Netherlands)

Telea, Alexandru; Wijk, Jarke J. van

2003-01-01

We present a hardware-accelerated method for visualizing 3D flow fields. The method is based on insertion, advection, and decay of dye. To this aim, we extend the texture-based IBFV technique for 2D flow visualization in two main directions. First, we decompose the 3D flow visualization problem in a

3D IBFV : hardware-accelerated 3D flow visualization

NARCIS (Netherlands)

Telea, A.C.; Wijk, van J.J.

2003-01-01

We present a hardware-accelerated method for visualizing 3D flow fields. The method is based on insertion, advection, and decay of dye. To this aim, we extend the texture-based IBFV technique presented by van Wijk (2001) for 2D flow visualization in two main directions. First, we decompose the 3D

The ambiguity of ethnicity as risk factor of vitamin D deficiency--a case study of Danish vitamin D policy documents

DEFF Research Database (Denmark)

Mygind, Anna; Traulsen, Janine Morgall; Nørgaard, Lotte Stig

2011-01-01

of interpretative flexibility regarding how ethnic minorities are constructed as a risk group for vitamin D deficiency. The ten documents analysed revealed eight different constructions of the ethnic minorities groups at risk. A low degree of interpretative flexibility was found regarding the importance of skin...... colour and skin covering. Major disagreements were found regarding the importance attributed to the Islamic religion, other traditions, immigration, gender and age, and use of an evolutionary explanation for the increased risk. CONCLUSIONS: Ethnic minorities at risk of vitamin D deficiency......OBJECTIVES: To explore how ethnic minorities at risk of vitamin D deficiency are constructed in Danish policy documents (current as of April 2009), regarding vitamin D supplementation. METHODS: Ten policy documents were analysed through content analysis, focusing on definitions and explanations...

D7.1 Quality Plan

DEFF Research Database (Denmark)

Ryberg, Thomas; Lee, Deirdre; Maglavera, Stavroula

2009-01-01

This deliverable includes a detailed description of the quality assurance process for the EATrain2 project, the initial results of the risk assessment and self-evaluation processes as well as a description of the peer-review process for ensuring qualitative deliverables....

Acute D2/D3 dopaminergic agonism but chronic D2/D3 antagonism prevents NMDA antagonist neurotoxicity.

Science.gov (United States)

Farber, Nuri B; Nemmers, Brian; Noguchi, Kevin K

2006-09-15

Antagonists of the N-methyl-D-aspartate (NMDA) glutamate receptor, most likely by producing disinhibtion in complex circuits, acutely produce psychosis and cognitive disturbances in humans, and neurotoxicity in rodents. Studies examining NMDA Receptor Hypofunction (NRHypo) neurotoxicity in animals, therefore, may provide insights into the pathophysiology of psychotic disorders. Dopaminergic D2 and/or D3 agents can modify psychosis over days to weeks, suggesting involvement of these transmitter system(s). We studied the ability of D2/D3 agonists and antagonists to modify NRHypo neurotoxicity both after a one-time acute exposure and after chronic daily exposure. Here we report that D2/D3 dopamine agonists, probably via D3 receptors, prevent NRHypo neurotoxicity when given acutely. The protective effect with D2/D3 agonists is not seen after chronic daily dosing. In contrast, the antipsychotic haloperidol does not affect NRHypo neurotoxicity when given acutely at D2/D3 doses. However, after chronic daily dosing of 1, 3, or 5 weeks, haloperidol does prevent NRHypo neurotoxicity with longer durations producing greater protection. Understanding the changes that occur in the NRHypo circuit after chronic exposure to dopaminergic agents could provide important clues into the pathophysiology of psychotic disorders.

Ensuring on-time quality data management deliverables from global clinical data management teams

Directory of Open Access Journals (Sweden)

Zia Haque

2010-01-01

Full Text Available The growing emphasis on off-site and off-shore clinical data management activities mandates a paramount need for adequate solutions geared toward on-time, quality deliverables. The author has been leading large teams that have been involved in successful global clinical data management endeavors. While each study scenario is unique and has to be approached as such, there are several elements in defining strategy and team structure in global clinical data management that can be applied universally. In this article, key roles, practices, and high-level procedures are laid out as a road map to ensure success with the model.

Advancing Open 3D Modelling Standards in National Spatial Information Policy

NARCIS (Netherlands)

Trakas, A.; Janssen, P.; Stoter, J.

2012-01-01

Individuals and organisations around the world - facing extraordinary challenges and new opportunities - are together engaged in numerous projects, involving natural and built environments. Spatial information policy is at the heart of these projects. The information technologies available enable

Summary of FY 17 Assessments Sandia National Laboratories: Evaluation of FY16 SNL FCT M2 Milestone Deliverables

Energy Technology Data Exchange (ETDEWEB)

Appel, Gordon John

2017-03-01

This report is the milestone deliverable M4FT-17SN111102091 “Summary of Assessments Performed FY17 by SNL QA POC” for work package FT-17SN11110209 titled “Quality Assurance – SNL”. This report summarizes the FY17 assessment performed on Fuel Cycle Technologies / Spent Fuel and Waste Disposition efforts.

Timing and Commitment of Environmental Policy, Adoption of New Technology, and Repercussions on R and D

International Nuclear Information System (INIS)

Requate, T.

2005-01-01

We investigate the interplay between environmental policy, incentives to adopt new technology, and repercussions on R and D. We study a model where a monopolistic upstream firm engages in R and D and sells advanced abatement technology to polluting downstream firms. We consider four different timing and commitment regimes of environmental tax and permit policies: ex post taxation (or issuing permits), interim commitment to a tax rate (a quota of permits) after observing R and D success but before adoption, and finally two types of ex antecommitment before R and D activity, one with a unique tax rate (quota of permits), the other one with a menu of tax rates (permit quotas). We study the second best tax and permit policies and rank these with respect to welfare. In particular, we find that commitment to a menu of tax rate dominates all other policy regimes

Characterizing 3D sensors using the 3D modulation transfer function

Science.gov (United States)

Kellner, Timo; Breitbarth, Andreas; Zhang, Chen; Notni, Gunther

2018-03-01

The fields of optical 3D measurement system applications are continuously expanding and becoming more and more diverse. To evaluate appropriate systems for various measurement tasks, comparable parameters are necessary, whereas the 3D modulation transfer function (3D-MTF) has been established as a further criterion. Its aim is the determination of the system response between the measurement of a straight, sharp-edged cube and its opposite ideal calculated one. Within the scope of this work simulations and practical investigations regarding the 3D-MTF’s influences and its main issues are specifically investigated. Therefore, different determined edge radii representing the high-frequency spectra lead to various decreasing 3D-MTF characteristics. Furthermore, rising sampling frequencies improve its maximum transfer value to a saturation point in dependence of the radius. To approve these results of previous simulations, three fringe projection scanners were selected to determine the diversity. As the best 3D-MTF characteristic, a saturated transfer value of H_3D( f_N, 3D) = 0.79 has been identified at a sufficient sampling frequency, which is reached at four times the Nyquist limit. This high 3D resolution can mainly be achieved due to an improved camera projector interaction. Additionally, too small sampling ratios lead to uncertainties in the edge function determination, while higher ratios do not show major improvements. In conclusion, the 3D-MTF algorithm has thus been practically verified and its repeatability as well as its robustness have been confirmed.

Aspects of defects in 3d-3d correspondence

International Nuclear Information System (INIS)

Gang, Dongmin; Kim, Nakwoo; Romo, Mauricio; Yamazaki, Masahito

2016-01-01

In this paper we study supersymmetric co-dimension 2 and 4 defects in the compactification of the 6d (2,0) theory of type A_N_−_1 on a 3-manifold M. The so-called 3d-3d correspondence is a relation between complexified Chern-Simons theory (with gauge group SL(N,ℂ)) on M and a 3d N=2 theory T_N[M]. We study this correspondence in the presence of supersymmetric defects, which are knots/links inside the 3-manifold. Our study employs a number of different methods: state-integral models for complex Chern-Simons theory, cluster algebra techniques, domain wall theory T[SU(N)], 5d N=2 SYM, and also supergravity analysis through holography. These methods are complementary and we find agreement between them. In some cases the results lead to highly non-trivial predictions on the partition function. Our discussion includes a general expression for the cluster partition function, which can be used to compute in the presence of maximal and certain class of non-maximal punctures when N>2. We also highlight the non-Abelian description of the 3d N=2T_N[M] theory with defect included, when such a description is available. This paper is a companion to our shorter paper http://dx.doi.org/10.1088/1751-8113/49/30/30LT02, which summarizes our main results.

Report on farm scale eco-efficiency of mitigation and adaption options. D10.3

DEFF Research Database (Denmark)

Kristensen, Ib Sillebak; Olesen, Jørgen Eivind; Hutchings, Nicholas John

2015-01-01

This deliverable collates the information on simulated effects of mitigation and adaptation options at the farm scale in Europe, primarily using the FarmAC model for the mitigation options, and applying semi quantitative modelling for the adaptation options....

D3-??????????????????????? ? ???? ?????????? ?2 ?????? ?????? ?????

OpenAIRE

?????????, ????; ???????, ???????; ??????, ?????????; ?????????????, ????; ??????, ??????

2011-01-01

????? ?????? ??????? ????? ????? ??????????? ?????? ?????? ????? ? ?????? ? ???????? ????? ?????????. ?????????? ???????????? ?????? ?? ?2 ?????? ?????? ????? ??????? ?? D3 ???????????????? ??????? ??????????? ?????? ????????? ????? ?????????? ??? ??? ??????????. ? ????? ????????????? ??????????? ??? ????????? ????????????? ?????????? ???? ?????????? ?????????? ????? ????????? ?????? ???????? ?? D3-????????????????? ???????.

Photoaffinity labeling of serum vitamin D binding protein by 3-deoxy-3-azido-25-hydroxyvitamin D3

International Nuclear Information System (INIS)

Link, R.P.; Kutner, A.; Schnoes, H.K.; DeLuca, H.F.

1987-01-01

3-Deoxy-3-azido-25-hydroxyvitamin D3 was covalently incorporated in the 25-hydroxyvitamin D3 binding site of purified human plasma vitamin D binding protein. Competition experiments showed that 3-deoxy-3-azido-25-hydroxyvitamin D3 and 25-hydroxyvitamin D3 bind at the same site on the protein. Tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was synthesized from tritiated 25-hydroxyvitamin D3, retaining the high specific activity of the parent compound. The tritiated azido label bound reversibly to human vitamin D binding protein in the dark and covalently to human vitamin D binding protein after exposure to ultraviolet light. Reversible binding of tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was compared to tritiated 25-hydroxyvitamin D3 binding to human vitamin D binding protein. Scatchard analysis of the data indicated equivalent maximum density binding sites with a KD,app of 0.21 nM for 25-hydroxyvitamin D3 and a KD,app of 1.3 nM for the azido derivative. Covalent binding was observed only after exposure to ultraviolet irradiation, with an average of 3% of the reversibly bound label becoming covalently bound to vitamin D binding protein. The covalent binding was reduced 70-80% when 25-hydroxyvitamin D3 was present, indicating strong covalent binding at the vitamin D binding site of the protein. When tritiated 3-deoxy-3-azido-25-hydroxyvitamin D3 was incubated with human plasma in the absence and presence of 25-hydroxyvitamin D3, 12% of the azido derivative was reversibly bound to vitamin D binding protein. After ultraviolet irradiation, four plasma proteins covalently bound the azido label, but vitamin D binding protein was the only protein of the four that was unlabeled in the presence of 25-hydroxyvitamin D3

3D for free using the Mac's standard apps : converting raw 3D text files to QuickDraw 3D's 3DMF format using AppleScript

NARCIS (Netherlands)

Djajadiningrat, J.P.

2003-01-01

This article introduces you to the basics of 3D files in general and the 3D Metafile (3DMF), QuickDraw 3D's native 3D format, in particular. It shows how you can use AppleScript to easily convert a raw 3D text file into a 3DMF readable by the QuickDraw 3D Viewer or any other QuickDraw 3D compatible

16 CFR 1018.3 - Policy.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Policy. 1018.3 Section 1018.3 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL ADVISORY COMMITTEE MANAGEMENT General Provisions § 1018... Executive Order No. 11769 and OMB Circular No. A-63. Principles to be followed include: (a) Limiting the...

3D Elevation Program—Virtual USA in 3D

Science.gov (United States)

Lukas, Vicki; Stoker, J.M.

2016-04-14

The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) uses a laser system called ‘lidar’ (light detection and ranging) to create a virtual reality map of the Nation that is very accurate. 3D maps have many uses with new uses being discovered all the time.  

Description of the Probabilistic Wind Atlas Methodology, Deliverable D3.1

DEFF Research Database (Denmark)

Hahmann, Andrea N.; Witha, Björn; Rife, Daran L.

against data from 10 meteorological masts in South Africa, part of the Wind Atlas of South Africa (WASA) project, where a long-term set of high-quality observations exist. The results of the ensemble simulations are encouraging, but further analysis is needed to quantify their utility. A key disadvantage...

From Imitation to Innovation: A Study of China’s Drug R&D and Relevant National Policies

Directory of Open Access Journals (Sweden)

Jinxi Ding

2011-06-01

Full Text Available Research & Development (R&D plays an increasingly important role in China’s pharmaceutical industry. To gain a competitive edge in the global pharmaceutical market, the current national strategy of China forcefully pushes for independent drug innovations. This article investigates the historical, legal, and institutional contexts in which China’s drug R&D has evolved. Based on an analysis of the drug R&D evolution and national policies in China, it predicts the future trend of China’s policies relevant to drug innovations. This paper helps to understand the impact of national policies on drug R&D in China, which can be used to inform decision-making on investments in China’s pharmaceutical market or conducting technology trade and international cooperation with Chinese partners.

3D Animation Essentials

CERN Document Server

Beane, Andy

2012-01-01

The essential fundamentals of 3D animation for aspiring 3D artists 3D is everywhere--video games, movie and television special effects, mobile devices, etc. Many aspiring artists and animators have grown up with 3D and computers, and naturally gravitate to this field as their area of interest. Bringing a blend of studio and classroom experience to offer you thorough coverage of the 3D animation industry, this must-have book shows you what it takes to create compelling and realistic 3D imagery. Serves as the first step to understanding the language of 3D and computer graphics (CG)Covers 3D anim

3DSEM: A 3D microscopy dataset

Directory of Open Access Journals (Sweden)

Ahmad P. Tafti

2016-03-01

Full Text Available The Scanning Electron Microscope (SEM as a 2D imaging instrument has been widely used in many scientific disciplines including biological, mechanical, and materials sciences to determine the surface attributes of microscopic objects. However the SEM micrographs still remain 2D images. To effectively measure and visualize the surface properties, we need to truly restore the 3D shape model from 2D SEM images. Having 3D surfaces would provide anatomic shape of micro-samples which allows for quantitative measurements and informative visualization of the specimens being investigated. The 3DSEM is a dataset for 3D microscopy vision which is freely available at [1] for any academic, educational, and research purposes. The dataset includes both 2D images and 3D reconstructed surfaces of several real microscopic samples. Keywords: 3D microscopy dataset, 3D microscopy vision, 3D SEM surface reconstruction, Scanning Electron Microscope (SEM

Phase correction for three-dimensional (3D) diffusion-weighted interleaved EPI using 3D multiplexed sensitivity encoding and reconstruction (3D-MUSER).

Science.gov (United States)

Chang, Hing-Chiu; Hui, Edward S; Chiu, Pui-Wai; Liu, Xiaoxi; Chen, Nan-Kuei

2018-05-01

Three-dimensional (3D) multiplexed sensitivity encoding and reconstruction (3D-MUSER) algorithm is proposed to reduce aliasing artifacts and signal corruption caused by inter-shot 3D phase variations in 3D diffusion-weighted echo planar imaging (DW-EPI). 3D-MUSER extends the original framework of multiplexed sensitivity encoding (MUSE) to a hybrid k-space-based reconstruction, thereby enabling the correction of inter-shot 3D phase variations. A 3D single-shot EPI navigator echo was used to measure inter-shot 3D phase variations. The performance of 3D-MUSER was evaluated by analyses of point-spread function (PSF), signal-to-noise ratio (SNR), and artifact levels. The efficacy of phase correction using 3D-MUSER for different slab thicknesses and b-values were investigated. Simulations showed that 3D-MUSER could eliminate artifacts because of through-slab phase variation and reduce noise amplification because of SENSE reconstruction. All aliasing artifacts and signal corruption in 3D interleaved DW-EPI acquired with different slab thicknesses and b-values were reduced by our new algorithm. A near-whole brain single-slab 3D DTI with 1.3-mm isotropic voxel acquired at 1.5T was successfully demonstrated. 3D phase correction for 3D interleaved DW-EPI data is made possible by 3D-MUSER, thereby improving feasible slab thickness and maximum feasible b-value. Magn Reson Med 79:2702-2712, 2018. © 2017 International Society for Magnetic Resonance in Medicine. © 2017 International Society for Magnetic Resonance in Medicine.

EUROPEANA AND 3D

Directory of Open Access Journals (Sweden)

D. Pletinckx

2012-09-01

Full Text Available The current 3D hype creates a lot of interest in 3D. People go to 3D movies, but are we ready to use 3D in our homes, in our offices, in our communication? Are we ready to deliver real 3D to a general public and use interactive 3D in a meaningful way to enjoy, learn, communicate? The CARARE project is realising this for the moment in the domain of monuments and archaeology, so that real 3D of archaeological sites and European monuments will be available to the general public by 2012. There are several aspects to this endeavour. First of all is the technical aspect of flawlessly delivering 3D content over all platforms and operating systems, without installing software. We have currently a working solution in PDF, but HTML5 will probably be the future. Secondly, there is still little knowledge on how to create 3D learning objects, 3D tourist information or 3D scholarly communication. We are still in a prototype phase when it comes to integrate 3D objects in physical or virtual museums. Nevertheless, Europeana has a tremendous potential as a multi-facetted virtual museum. Finally, 3D has a large potential to act as a hub of information, linking to related 2D imagery, texts, video, sound. We describe how to create such rich, explorable 3D objects that can be used intuitively by the generic Europeana user and what metadata is needed to support the semantic linking.

43 CFR 422.3 - Reclamation law enforcement policy.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Reclamation law enforcement policy. 422.3 Section 422.3 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF RECLAMATION, DEPARTMENT OF THE INTERIOR LAW ENFORCEMENT AUTHORITY AT BUREAU OF RECLAMATION PROJECTS § 422.3 Reclamation law enforcement policy. The law enforcement...

Micronutrient recommendations and policies in Spain: the cases of iodine, folic acid and vitamin D.

Science.gov (United States)

Brito Garcia, N; Serra Majem, L

2012-01-01

INTRODUCCIÓN: As part of the work carried out within the EURopean micronutrient RECommendations Aligned (EURRECA) Network of Excellence in Spain, we conducted a series of semi-structured interviews with decision makers and relevant scientific institutions in the field of nutrition and public health. The information gathered was collated with national relevant official and unofficial documents and subsequently analysed. To describe the current situation about nutrition policy in Spain, with special focus on the process of setting micronutrient recommendations and the development of subsequent policies. 3 cases will be detailed: iodine, folic acid and vitamin D. Information from 9 interviews was contrasted with the available official and unofficial documents on micronutrients recommendations setting and subsequent policy applications to help the population to achieve their requirements. Common topics and themes were identified in the interviews and desk research. They describe a heterogenic picture of isolated initiatives and timid measures regarding micronutrients recommendations and subsequent policy instruments. Several recommendations coexist but none of them is the result of an official request by the government or competent authority. Iodine, folic acid and vitamin D represent the past, the present and the future of public health policy measures on micronutrients in Spain. Despite of some examples, there exist a need for action. Current nutrition strategies are focused on obesity, with little room for micronutrients national measures despite of the opinion of many experts. Regardless of the several nutrients recommendations coexisting nowadays in Spain, there exist the need for a coordinated action in the field of micronutrients recommendations, fostered by the health and nutrition official authorities with financial support and clear terms of reference.

Development of a 3D GIS and its application to karst areas

Science.gov (United States)

Wu, Qiang; Xu, Hua; Zhou, Wanfang

2008-05-01

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.

From 3D view to 3D print

Science.gov (United States)

Dima, M.; Farisato, G.; Bergomi, M.; Viotto, V.; Magrin, D.; Greggio, D.; Farinato, J.; Marafatto, L.; Ragazzoni, R.; Piazza, D.

2014-08-01

In the last few years 3D printing is getting more and more popular and used in many fields going from manufacturing to industrial design, architecture, medical support and aerospace. 3D printing is an evolution of bi-dimensional printing, which allows to obtain a solid object from a 3D model, realized with a 3D modelling software. The final product is obtained using an additive process, in which successive layers of material are laid down one over the other. A 3D printer allows to realize, in a simple way, very complex shapes, which would be quite difficult to be produced with dedicated conventional facilities. Thanks to the fact that the 3D printing is obtained superposing one layer to the others, it doesn't need any particular work flow and it is sufficient to simply draw the model and send it to print. Many different kinds of 3D printers exist based on the technology and material used for layer deposition. A common material used by the toner is ABS plastics, which is a light and rigid thermoplastic polymer, whose peculiar mechanical properties make it diffusely used in several fields, like pipes production and cars interiors manufacturing. I used this technology to create a 1:1 scale model of the telescope which is the hardware core of the space small mission CHEOPS (CHaracterising ExOPlanets Satellite) by ESA, which aims to characterize EXOplanets via transits observations. The telescope has a Ritchey-Chrétien configuration with a 30cm aperture and the launch is foreseen in 2017. In this paper, I present the different phases for the realization of such a model, focusing onto pros and cons of this kind of technology. For example, because of the finite printable volume (10×10×12 inches in the x, y and z directions respectively), it has been necessary to split the largest parts of the instrument in smaller components to be then reassembled and post-processed. A further issue is the resolution of the printed material, which is expressed in terms of layers

Vitamin D3 and 25-hydroxyvitamin D3 in pork and their relationship to vitamin D status in pigs

DEFF Research Database (Denmark)

Burild, Anders; Lauridsen, Charlotte; Faqir, Nasrin

2016-01-01

The content of vitamin D in pork produced in conventional systems depends on the vitamin D concentration in the pig feed. Both vitamin D3 and 25-hydroxyvitamin D3 (25(OH)D3) are essential sources of dietary vitamin D; however, bioavailability assessed by serum 25(OH)D3 concentration is reported...... of vitamin D3 and 25(OH)D3 in the pig feed for 49 d before slaughter. Concurrently, the 25(OH)D3 level in serum was investigated as a biomarker to assess the content of vitamin D3 and 25(OH)D3 in pig tissues. Adipose tissue, white and red muscle, the liver and serum were sampled from pigs fed feed containing...... either vitamin D3 or 25(OH)D3 at 5, 20, 35 or 50 µg/kg feed for 7 weeks before slaughter. The tissue 25(OH)D3 level was significantly higher in the pigs fed 25(OH)D3 compared with those fed vitamin D3, while the tissue vitamin D3 level was higher in the pigs fed vitamin D3 compared with those fed 25(OH...

A 2D driven 3D vessel segmentation algorithm for 3D digital subtraction angiography data

International Nuclear Information System (INIS)

Spiegel, M; Hornegger, J; Redel, T; Struffert, T; Doerfler, A

2011-01-01

Cerebrovascular disease is among the leading causes of death in western industrial nations. 3D rotational angiography delivers indispensable information on vessel morphology and pathology. Physicians make use of this to analyze vessel geometry in detail, i.e. vessel diameters, location and size of aneurysms, to come up with a clinical decision. 3D segmentation is a crucial step in this pipeline. Although a lot of different methods are available nowadays, all of them lack a method to validate the results for the individual patient. Therefore, we propose a novel 2D digital subtraction angiography (DSA)-driven 3D vessel segmentation and validation framework. 2D DSA projections are clinically considered as gold standard when it comes to measurements of vessel diameter or the neck size of aneurysms. An ellipsoid vessel model is applied to deliver the initial 3D segmentation. To assess the accuracy of the 3D vessel segmentation, its forward projections are iteratively overlaid with the corresponding 2D DSA projections. Local vessel discrepancies are modeled by a global 2D/3D optimization function to adjust the 3D vessel segmentation toward the 2D vessel contours. Our framework has been evaluated on phantom data as well as on ten patient datasets. Three 2D DSA projections from varying viewing angles have been used for each dataset. The novel 2D driven 3D vessel segmentation approach shows superior results against state-of-the-art segmentations like region growing, i.e. an improvement of 7.2% points in precision and 5.8% points for the Dice coefficient. This method opens up future clinical applications requiring the greatest vessel accuracy, e.g. computational fluid dynamic modeling.

United States Transportation Command Compliance with DoD Policy on the Use of Commercial Sealift

National Research Council Canada - National Science Library

Jolliffe, Richard B; Mehlman, Benjamin A; Lippolis, Susan J; Avers, Marc E; Brake, Chrispian M; Lyons, Amber M; Alvarez Torres, Zorayma; Groubert, Christopher S; Milner, Jillisa H

2007-01-01

.... The overall objective of the audit was to determine whether USTRANSCOM was complying with DoD policies in the use of commercial transport during wartime and whether those policies provide optimal...

3D gaze tracking system for NVidia 3D Vision®.

Science.gov (United States)

Wibirama, Sunu; Hamamoto, Kazuhiko

2013-01-01

Inappropriate parallax setting in stereoscopic content generally causes visual fatigue and visual discomfort. To optimize three dimensional (3D) effects in stereoscopic content by taking into account health issue, understanding how user gazes at 3D direction in virtual space is currently an important research topic. In this paper, we report the study of developing a novel 3D gaze tracking system for Nvidia 3D Vision(®) to be used in desktop stereoscopic display. We suggest an optimized geometric method to accurately measure the position of virtual 3D object. Our experimental result shows that the proposed system achieved better accuracy compared to conventional geometric method by average errors 0.83 cm, 0.87 cm, and 1.06 cm in X, Y, and Z dimensions, respectively.

LandSIM3D: modellazione in real time 3D di dati geografici

Directory of Open Access Journals (Sweden)

Lambo Srl Lambo Srl

2009-03-01

Full Text Available LandSIM3D: realtime 3D modelling of geographic data LandSIM3D allows to model in 3D an existing landscape in a few hours only and geo-referenced offering great landscape analysis and understanding tools. 3D projects can then be inserted into the existing landscape with ease and precision. The project alternatives and impact can then be visualized and studied into their immediate environmental. The complex evolution of the landscape in the future can also be simulated and the landscape model can be manipulated interactively and better shared with colleagues. For that reason, LandSIM3D is different from traditional 3D imagery solutions, normally reserved for computer graphics experts. For more information about LandSIM3D, go to www.landsim3d.com.

Transfer of learning between 2D and 3D sources during infancy: Informing theory and practice.

Science.gov (United States)

Barr, Rachel

2010-06-01

The ability to transfer learning across contexts is an adaptive skill that develops rapidly during early childhood. Learning from television is a specific instance of transfer of learning between a 2-Dimensional (2D) representation and a 3-Dimensional (3D) object. Understanding the conditions under which young children might accomplish this particular kind of transfer is important because by 2 years of age 90% of US children are viewing television on a daily basis. Recent research shows that children can imitate actions presented on television using the corresponding real-world objects, but this same research also shows that children learn less from television than they do from live demonstrations until they are at least 3 years old; termed the video deficit effect. At present, there is no coherent theory to account for the video deficit effect; how learning is disrupted by this change in context is poorly understood. The aims of the present review are (1) to review the conditions under which children transfer learning between 2D images and 3D objects during early childhood, and (2) to integrate developmental theories of memory processing into the transfer of learning from media literature using Hayne's (2004) developmental representational flexibility account. The review will conclude that studies on the transfer of learning between 2D and 3D sources have important theoretical implications for general developmental theories of cognitive development, and in particular the development of a flexible representational system, as well as policy implications for early education regarding the potential use and limitations of media as effective teaching tools during early childhood.

Identification of the transition arrays 3d74s-3d74p in Br X and 3d64s-3d64p in Br XI

International Nuclear Information System (INIS)

Zeng, X.T.; Jupen, C.; Bengtsson, P.; Engstroem, L.; Westerlind, M.; Martinson, I.

1991-01-01

We report a beam-foil study of multiply ionized bromine in the region 400-1300A, performed with 6 and 8 MeV Br ions from a tandem accelerator. At these energies transitions belonging to Fe-like Br X and Mn-like Br XI are expected to be prominent. We have identified 31 lines as 3d 7 4s-3d 7 4p transitions in Br X, from which 16 levels of the previously unknown 3d 7 4s configuration could be established. We have also added 6 new 3d 7 4p levels to the 99 previously known. For Br XI we have classified 9 lines as 3d 6 4s-3d 6 4p combinations. The line identifications have been corroborated by isoelectronic comparisons and theoretical calculations using the superposition-of-configurations technique. (orig.)

Investigation of the C-3-epi-25(OH)D3 of 25-hydroxyvitamin D3 in urban schoolchildren.

Science.gov (United States)

Berger, Samantha E; Van Rompay, Maria I; Gordon, Catherine M; Goodman, Elizabeth; Eliasziw, Misha; Holick, Michael F; Sacheck, Jennifer M

2018-03-01

The physiological relevance C-3 epimer of 25-hydroxyvitamin D (3-epi-25(OH)D) is not well understood among youth. The objective of this study was to assess whether demographic/physiologic characteristics were associated with 3-epi-25(OH)D 3 concentrations in youth. Associations between 3-epi-25(OH)D 3 and demographics and between 3-epi-25(OH)D 3 , total 25-hydroxyvitamin (25(OH)D) (25(OH)D 2 + 25(OH)D 3 ), total cholesterol, high-density lipoprotein, low-density lipoprotein, and triglycerides were examined in racially/ethnically diverse schoolchildren (n = 682; age, 8-15 years) at Boston-area urban schools. Approximately 50% of participants had detectable 3-epi-25(OH)D 3 (range 0.95-3.95 ng/mL). The percentage of 3-epi-25(OH)D 3 of total 25(OH)D ranged from 2.5% to 17.0% (median 5.5%). Males were 38% more likely than females to have detectable 3-epi-25(OH)D 3 concentrations. Both Asian and black race/ethnicity were associated with lower odds of having detectable 3-epi-25(OH)D 3 compared with non-Hispanic white children (Asian vs. white, odds ratio (OR) 0.28, 95% confidence interval (CI) 0.14-0.53; black vs. white, OR 0.38, 95%CI 0.23-0.63, p 30 ng/mL) 25(OH)D concentration was associated with higher odds of having detectable 3-epi-25(OH)D 3 than having an inadequate (<20 ng/mL) concentration (OR 4.78, 95%CI 3.23-6.94 or OR 14.10, 95%CI 7.10-28.0, respectively). There was no association between 3-epi-25(OH)D 3 and blood lipids. However, when considering 3-epi-25(OH)D 3 as a percentage of total 25(OH)D, total cholesterol was lower in children with percent 3-epi-25(OH)D 3 above the median (mean difference -7.1 mg/dL, p = 0.01). In conclusion, among schoolchildren, sex, race/ethnicity, and total serum 25(OH)D concentration is differentially associated with 3-epi-25(OH)D. The physiological relevance of 3-epi-25(OH)D 3 may be related to the 3-epi-25(OH)D 3 as a percentage of total 25(OH)D and should be considered in future investigations.

"3D fusion" echocardiography improves 3D left ventricular assessment: comparison with 2D contrast echocardiography.

Science.gov (United States)

Augustine, Daniel; Yaqub, Mohammad; Szmigielski, Cezary; Lima, Eduardo; Petersen, Steffen E; Becher, Harald; Noble, J Alison; Leeson, Paul

2015-02-01

Three-dimensional fusion echocardiography (3DFE) is a novel postprocessing approach that utilizes imaging data acquired from multiple 3D acquisitions. We assessed image quality, endocardial border definition, and cardiac wall motion in patients using 3DFE compared to standard 3D images (3D) and results obtained with contrast echocardiography (2DC). Twenty-four patients (mean age 66.9 ± 13 years, 17 males, 7 females) undergoing 2DC had three, noncontrast, 3D apical volumes acquired at rest. Images were fused using an automated image fusion approach. Quality of the 3DFE was compared to both 3D and 2DC based on contrast-to-noise ratio (CNR) and endocardial border definition. We then compared clinical wall-motion score index (WMSI) calculated from 3DFE and 3D to those obtained from 2DC images. Fused 3D volumes had significantly improved CNR (8.92 ± 1.35 vs. 6.59 ± 1.19, P echocardiography (1.06 ± 0.09 vs. 1.07 ± 0.15, P = 0.69), whereas unfused images produced significantly more variable results (1.19 ± 0.30). This was confirmed by a better intraclass correlation coefficient (ICC 0.72; 95% CI 0.32-0.88) relative to comparisons with unfused images (ICC 0.56; 95% CI 0.02-0.81). 3DFE significantly improves left ventricular image quality compared to unfused 3D in a patient population and allows noncontrast assessment of wall motion that approaches that achieved with 2D contrast echocardiography. © 2014, Wiley Periodicals, Inc.

iCAVE: an open source tool for visualizing biomolecular networks in 3D, stereoscopic 3D and immersive 3D.

Science.gov (United States)

Liluashvili, Vaja; Kalayci, Selim; Fluder, Eugene; Wilson, Manda; Gabow, Aaron; Gümüs, Zeynep H

2017-08-01

Visualizations of biomolecular networks assist in systems-level data exploration in many cellular processes. Data generated from high-throughput experiments increasingly inform these networks, yet current tools do not adequately scale with concomitant increase in their size and complexity. We present an open source software platform, interactome-CAVE (iCAVE), for visualizing large and complex biomolecular interaction networks in 3D. Users can explore networks (i) in 3D using a desktop, (ii) in stereoscopic 3D using 3D-vision glasses and a desktop, or (iii) in immersive 3D within a CAVE environment. iCAVE introduces 3D extensions of known 2D network layout, clustering, and edge-bundling algorithms, as well as new 3D network layout algorithms. Furthermore, users can simultaneously query several built-in databases within iCAVE for network generation or visualize their own networks (e.g., disease, drug, protein, metabolite). iCAVE has modular structure that allows rapid development by addition of algorithms, datasets, or features without affecting other parts of the code. Overall, iCAVE is the first freely available open source tool that enables 3D (optionally stereoscopic or immersive) visualizations of complex, dense, or multi-layered biomolecular networks. While primarily designed for researchers utilizing biomolecular networks, iCAVE can assist researchers in any field. © The Authors 2017. Published by Oxford University Press.

3D accelerator magnet calculations using MAGNUS-3D

International Nuclear Information System (INIS)

Pissanetzky, S.; Miao, Y.

1989-01-01

The steady trend towards increased magnetic and geometric complexity in the design of accelerator magnets has caused a need for reliable 3D computer models and a better understanding of the behavior of magnetic system in three dimensions. The capabilities of the MAGNUS-3D family of programs are ideally suited to solve this class of problems and provide insight into 3D effects. MAGNUS-3D can solve any problem of magnetostatics involving permanent magnets, nonlinear ferromagnetic materials and electric conductors. MAGNUS-3D uses the finite element method and the two-scalar-potentials formulation of Maxwell's equations to obtain the solution, which can then be used interactively to obtain tables of field components at specific points or lines, plots of field lines, function graphs representing a field component plotted against a coordinate along any line in space (such as the beam line), and views of the conductors, the mesh and the magnetic bodies. The magnetic quantities that can be calculated include the force or torque on conductors or magnetic parts, the energy, the flux through a specified surface, line integrals of any field component along any line in space, and the average field or potential harmonic coefficients. We describe the programs with emphasis placed on their use for accelerator magnet design, and present an advanced example of actual calculations. (orig.)

Recording stereoscopic 3D neurosurgery with a head-mounted 3D camera system.

Science.gov (United States)

Lee, Brian; Chen, Brian R; Chen, Beverly B; Lu, James Y; Giannotta, Steven L

2015-06-01

Stereoscopic three-dimensional (3D) imaging can present more information to the viewer and further enhance the learning experience over traditional two-dimensional (2D) video. Most 3D surgical videos are recorded from the operating microscope and only feature the crux, or the most important part of the surgery, leaving out other crucial parts of surgery including the opening, approach, and closing of the surgical site. In addition, many other surgeries including complex spine, trauma, and intensive care unit procedures are also rarely recorded. We describe and share our experience with a commercially available head-mounted stereoscopic 3D camera system to obtain stereoscopic 3D recordings of these seldom recorded aspects of neurosurgery. The strengths and limitations of using the GoPro(®) 3D system as a head-mounted stereoscopic 3D camera system in the operating room are reviewed in detail. Over the past several years, we have recorded in stereoscopic 3D over 50 cranial and spinal surgeries and created a library for education purposes. We have found the head-mounted stereoscopic 3D camera system to be a valuable asset to supplement 3D footage from a 3D microscope. We expect that these comprehensive 3D surgical videos will become an important facet of resident education and ultimately lead to improved patient care.

On applications of excess level processes to (N,D-policy bulk queueing systems

Directory of Open Access Journals (Sweden)

Jewgeni H. Dshalalow

1996-01-01

Full Text Available The paper deals with queueing systems in which N- and D-policies are combined into one. This means that an idle or vacationing server will resume his service if the queueing or workload process crosses some specified fixed level N or D, respectively. For the proposed (N,D-policy we study the queueing processes in models with and without server vacations, with compound Poisson input, and with generally distributed service and vacation periods. The analysis of the models is essentially based on fluctuation techniques for two-dimensional marked counting processes newly developed by the author. The results enable us to arrive at stationary distributions for the embedded and continuous time parameter queueing processes in closed analytic forms, enhancing the well-known Kendall formulas and their modifications.

2D-Driven 3D Object Detection in RGB-D Images

KAUST Repository

Lahoud, Jean

2017-12-25

In this paper, we present a technique that places 3D bounding boxes around objects in an RGB-D scene. Our approach makes best use of the 2D information to quickly reduce the search space in 3D, benefiting from state-of-the-art 2D object detection techniques. We then use the 3D information to orient, place, and score bounding boxes around objects. We independently estimate the orientation for every object, using previous techniques that utilize normal information. Object locations and sizes in 3D are learned using a multilayer perceptron (MLP). In the final step, we refine our detections based on object class relations within a scene. When compared to state-of-the-art detection methods that operate almost entirely in the sparse 3D domain, extensive experiments on the well-known SUN RGB-D dataset [29] show that our proposed method is much faster (4.1s per image) in detecting 3D objects in RGB-D images and performs better (3 mAP higher) than the state-of-the-art method that is 4.7 times slower and comparably to the method that is two orders of magnitude slower. This work hints at the idea that 2D-driven object detection in 3D should be further explored, especially in cases where the 3D input is sparse.

Policy Process Editor for P3BM Software

Science.gov (United States)

James, Mark; Chang, Hsin-Ping; Chow, Edward T.; Crichton, Gerald A.

2010-01-01

A computer program enables generation, in the form of graphical representations of process flows with embedded natural-language policy statements, input to a suite of policy-, process-, and performance-based management (P3BM) software. This program (1) serves as an interface between users and the Hunter software, which translates the input into machine-readable form; and (2) enables users to initialize and monitor the policy-implementation process. This program provides an intuitive graphical interface for incorporating natural-language policy statements into business-process flow diagrams. Thus, the program enables users who dictate policies to intuitively embed their intended process flows as they state the policies, reducing the likelihood of errors and reducing the time between declaration and execution of policy.

3D Recording methodology applied to the Grotta Scritta Prehistoric Rock-Shelter in Olmeta-Di-Capocorso (Corsica, France)

Science.gov (United States)

Grussenmeyer, P.; Burens, A.; Guillemin, S.; Alby, E.; Allegrini Simonetti, F.; Marchetti, M.-L.

2015-08-01

The Grotta Scritta I prehistoric site is located on the west side of Cap Corse, in the territory of the municipality of Olmeta-di- Capocorso (Haute-Corse, France). This rock shelter is located on a western spur of the mountains La Serra, at 412 m height above sea level. In the regional context of a broad set of megalithic burial sites (regions Nebbiu and Agriates) and a rich insular prehistoric rock art with several engraved patterns (mainly geometric), the Grotta Scritta is the only site with painted depictions of Corsica. Around twenty parietal depictions are arranged in the upper part of the rock-shelter and takes advantage of the microtopography of the wall. Today, the Grotta Scritta is a vulnerable site, made fragile by the action of time and man. The 3D scanning of the rockshelter and paintings of the Grotta Scritta was carried out by surveyors and archaeologists from INSA Strasbourg and from UMR 5602 GEODE (Toulouse), by combining accurate terrestrial laser scanning and photogrammetry techniques. These techniques are based on a full 3D documentation without contact of the rock-shelter paintings. The paper presents the data acquisition methodology followed by an overview of data processing solutions based on both imaging and laser scanning. Several deliverables as point clouds, meshed models, textured models and orthoimages are proposed for the documentation. Beyond their usefulness in terms of valorization, communication and virtual restitution, the proposed models also provide support tools for the analysis and perception of the complexity of the volumes of the shelter (namely for the folded forms of the dome housing the paintings) as well as for the accuracy of the painted depictions recorded on the orthophotos processed from the 3D model.

Evaluation of dose prediction errors and optimization convergence errors of deliverable-based head-and-neck IMRT plans computed with a superposition/convolution dose algorithm

International Nuclear Information System (INIS)

Mihaylov, I. B.; Siebers, J. V.

2008-01-01

The purpose of this study is to evaluate dose prediction errors (DPEs) and optimization convergence errors (OCEs) resulting from use of a superposition/convolution dose calculation algorithm in deliverable intensity-modulated radiation therapy (IMRT) optimization for head-and-neck (HN) patients. Thirteen HN IMRT patient plans were retrospectively reoptimized. The IMRT optimization was performed in three sequential steps: (1) fast optimization in which an initial nondeliverable IMRT solution was achieved and then converted to multileaf collimator (MLC) leaf sequences; (2) mixed deliverable optimization that used a Monte Carlo (MC) algorithm to account for the incident photon fluence modulation by the MLC, whereas a superposition/convolution (SC) dose calculation algorithm was utilized for the patient dose calculations; and (3) MC deliverable-based optimization in which both fluence and patient dose calculations were performed with a MC algorithm. DPEs of the mixed method were quantified by evaluating the differences between the mixed optimization SC dose result and a MC dose recalculation of the mixed optimization solution. OCEs of the mixed method were quantified by evaluating the differences between the MC recalculation of the mixed optimization solution and the final MC optimization solution. The results were analyzed through dose volume indices derived from the cumulative dose-volume histograms for selected anatomic structures. Statistical equivalence tests were used to determine the significance of the DPEs and the OCEs. Furthermore, a correlation analysis between DPEs and OCEs was performed. The evaluated DPEs were within ±2.8% while the OCEs were within 5.5%, indicating that OCEs can be clinically significant even when DPEs are clinically insignificant. The full MC-dose-based optimization reduced normal tissue dose by as much as 8.5% compared with the mixed-method optimization results. The DPEs and the OCEs in the targets had correlation coefficients greater

E3D, 3-D Elastic Seismic Wave Propagation Code

International Nuclear Information System (INIS)

Larsen, S.; Harris, D.; Schultz, C.; Maddix, D.; Bakowsky, T.; Bent, L.

2004-01-01

1 - Description of program or function: E3D is capable of simulating seismic wave propagation in a 3D heterogeneous earth. Seismic waves are initiated by earthquake, explosive, and/or other sources. These waves propagate through a 3D geologic model, and are simulated as synthetic seismograms or other graphical output. 2 - Methods: The software simulates wave propagation by solving the elasto-dynamic formulation of the full wave equation on a staggered grid. The solution scheme is 4-order accurate in space, 2-order accurate in time

Innovations in 3D printing: a 3D overview from optics to organs.

Science.gov (United States)

Schubert, Carl; van Langeveld, Mark C; Donoso, Larry A

2014-02-01

3D printing is a method of manufacturing in which materials, such as plastic or metal, are deposited onto one another in layers to produce a three dimensional object, such as a pair of eye glasses or other 3D objects. This process contrasts with traditional ink-based printers which produce a two dimensional object (ink on paper). To date, 3D printing has primarily been used in engineering to create engineering prototypes. However, recent advances in printing materials have now enabled 3D printers to make objects that are comparable with traditionally manufactured items. In contrast with conventional printers, 3D printing has the potential to enable mass customisation of goods on a large scale and has relevance in medicine including ophthalmology. 3D printing has already been proved viable in several medical applications including the manufacture of eyeglasses, custom prosthetic devices and dental implants. In this review, we discuss the potential for 3D printing to revolutionise manufacturing in the same way as the printing press revolutionised conventional printing. The applications and limitations of 3D printing are discussed; the production process is demonstrated by producing a set of eyeglass frames from 3D blueprints.

Advancing Open 3D Modelling Standards in National Spatial Information Policy

OpenAIRE

Trakas, A.; Janssen, P.; Stoter, J.

2012-01-01

Individuals and organisations around the world - facing extraordinary challenges and new opportunities - are together engaged in numerous projects, involving natural and built environments. Spatial information policy is at the heart of these projects. The information technologies available enable individuals to observe, measure, describe, map and portray these environments with increasing ease, flexibility and precision. In our time, individuals create digital geographic objects that reflect ...

Silver deposited carboxymethyl chitosan-grafted magnetic nanoparticles as dual action deliverable antimicrobial materials.

Science.gov (United States)

Vo, Duc-Thang; Sabrina, Sabrina; Lee, Cheng-Kang

2017-04-01

Carboxymethyl chitosan (CMCS) was known to have a much better antimicrobial activity than chitosan due to the increased cationic -NH 3 + groups resulted from the intra- and intermolecular interactions between the carboxyl and amino groups. CMCS was grafted onto the surface of silica coated magnetic nanoparticles (MNPs) to obtain magnetically retrievable and deliverable antimicrobial nanoparticles (MNPs@CMCS). The presence of carboxylate groups in CMCS not only enhanced antimicrobial activity but also enabled Ag ions chelating ability to induce the in situ formation of Ag nanoparticles (AgNPs). The deposition of AgNPs on the surface of MNPs@CMCS could significantly increase its antimicrobial activity against planktonic cells due to the dual action of CMCS and AgNPs. Due to its high magnetism, the as-prepared MNPs@CMCS-Ag could be efficiently delivered into an existing biofilm under the guidance of an applied magnetic field. Without direct contact, the Ag ions and/or radical oxygen species (ROS) released from the deposited Ag nanoparticles could effectively kill the bacteria embedded in the extracellular polymeric substances (EPS) matrix of biofilm. Copyright © 2016 Elsevier B.V. All rights reserved.

On Alternative Approaches to 3D Image Perception: Monoscopic 3D Techniques

Science.gov (United States)

Blundell, Barry G.

2015-06-01

In the eighteenth century, techniques that enabled a strong sense of 3D perception to be experienced without recourse to binocular disparities (arising from the spatial separation of the eyes) underpinned the first significant commercial sales of 3D viewing devices and associated content. However following the advent of stereoscopic techniques in the nineteenth century, 3D image depiction has become inextricably linked to binocular parallax and outside the vision science and arts communities relatively little attention has been directed towards earlier approaches. Here we introduce relevant concepts and terminology and consider a number of techniques and optical devices that enable 3D perception to be experienced on the basis of planar images rendered from a single vantage point. Subsequently we allude to possible mechanisms for non-binocular parallax based 3D perception. Particular attention is given to reviewing areas likely to be thought-provoking to those involved in 3D display development, spatial visualization, HCI, and other related areas of interdisciplinary research.

3D Modelling and Printing Technology to Produce Patient-Specific 3D Models.

Science.gov (United States)

Birbara, Nicolette S; Otton, James M; Pather, Nalini

2017-11-10

A comprehensive knowledge of mitral valve (MV) anatomy is crucial in the assessment of MV disease. While the use of three-dimensional (3D) modelling and printing in MV assessment has undergone early clinical evaluation, the precision and usefulness of this technology requires further investigation. This study aimed to assess and validate 3D modelling and printing technology to produce patient-specific 3D MV models. A prototype method for MV 3D modelling and printing was developed from computed tomography (CT) scans of a plastinated human heart. Mitral valve models were printed using four 3D printing methods and validated to assess precision. Cardiac CT and 3D echocardiography imaging data of four MV disease patients was used to produce patient-specific 3D printed models, and 40 cardiac health professionals (CHPs) were surveyed on the perceived value and potential uses of 3D models in a clinical setting. The prototype method demonstrated submillimetre precision for all four 3D printing methods used, and statistical analysis showed a significant difference (p3D printed models, particularly using multiple print materials, were considered useful by CHPs for preoperative planning, as well as other applications such as teaching and training. This study suggests that, with further advances in 3D modelling and printing technology, patient-specific 3D MV models could serve as a useful clinical tool. The findings also highlight the potential of this technology to be applied in a variety of medical areas within both clinical and educational settings. Copyright © 2017 Australian and New Zealand Society of Cardiac and Thoracic Surgeons (ANZSCTS) and the Cardiac Society of Australia and New Zealand (CSANZ). Published by Elsevier B.V. All rights reserved.

The National 3-D Geospatial Information Web-Based Service of Korea

Science.gov (United States)

Lee, D. T.; Kim, C. W.; Kang, I. G.

2013-09-01

3D geospatial information systems should provide efficient spatial analysis tools and able to use all capabilities of the third dimension, and a visualization. Currently, many human activities make steps toward the third dimension like land use, urban and landscape planning, cadastre, environmental monitoring, transportation monitoring, real estate market, military applications, etc. To reflect this trend, the Korean government has been started to construct the 3D geospatial data and service platform. Since the geospatial information was introduced in Korea, the construction of geospatial information (3D geospatial information, digital maps, aerial photographs, ortho photographs, etc.) has been led by the central government. The purpose of this study is to introduce the Korean government-lead 3D geospatial information web-based service for the people who interested in this industry and we would like to introduce not only the present conditions of constructed 3D geospatial data but methodologies and applications of 3D geospatial information. About 15% (about 3,278.74 km2) of the total urban area's 3D geospatial data have been constructed by the national geographic information institute (NGII) of Korea from 2005 to 2012. Especially in six metropolitan cities and Dokdo (island belongs to Korea) on level of detail (LOD) 4 which is photo-realistic textured 3D models including corresponding ortho photographs were constructed in 2012. In this paper, we represented web-based 3D map service system composition and infrastructure and comparison of V-world with Google Earth service will be presented. We also represented Open API based service cases and discussed about the protection of location privacy when we construct 3D indoor building models. In order to prevent an invasion of privacy, we processed image blurring, elimination and camouflage. The importance of public-private cooperation and advanced geospatial information policy is emphasized in Korea. Thus, the progress of

Goodnip - Good Practices in Nordic Innovation Policies. Part 3

DEFF Research Database (Denmark)

Jensen, Søren Christrup; Edwards, Kasper; Pedersen, Jørgen Lindgaard

This report 3 is essentially a reference book for innovation policies in the Nordic countries and includes presentations of the innovation policy governance structures of teh Nordic countries. There are summaries of relevant policy documents, datasheets presenting selected innovation policy measu...... measures and an extended list of policy measures that goes beyond teh ones presented in teh datasheet section. For more information see the GoodNIP web site at http://www.step.no/goodnip...

Procedure for preparation of 3-fluor-D-alanine, 2-deutero-3-fluor-D-alanine and 2,3,3-trideutero-3-fluor-D-alanine and their salts

International Nuclear Information System (INIS)

Kollonitsch, J.; Kahan, F.M.

1971-01-01

Procedures for the preparation of 3-fluor-D-alanine, 2-deutero-3-fluor-D-alanine and 2,3,3-trideutero-3-fluor-D-alanine, and salts of these compounds, are described. These new compounds are useful antibacterial substances not only applicable in the disinfection of pharmaceutical, dental and medical equipment, but also in the treatment of diseases caused by bacteria, and may be administered orally. While 3-fluor-L-alanine metabolises rapidly with toxic results, 3-fluor-D-alanine is much more slowly broken down in vivo and is not harmful in normal doses. Further it has been found that deuteration gives new deutero-analogues which are less subject to metabolic breaking down and still retain the antibacterial strength of the original compound. The in vivo activity is thereby increased and maintained. (JIW)

D22 Analysis of Pilot

NARCIS (Netherlands)

Boyle, Elizabeth; MacGregor, Sharon; Van Rosmalen, Peter; Manea, Madalina; Penanen, Tiina

2015-01-01

The evaluation of the CHERMUG games was carried out in 3 phases which contributed in different ways to the game development and evaluation. Different cohorts of staff and students were involved in each phase and a detailed account of the list of pilot institutions is shown in Deliverable 21. Phase 1

Accurate and reproducible reconstruction of coronary arteries and endothelial shear stress calculation using 3D OCT: comparative study to 3D IVUS and 3D QCA.

Science.gov (United States)

Toutouzas, Konstantinos; Chatzizisis, Yiannis S; Riga, Maria; Giannopoulos, Andreas; Antoniadis, Antonios P; Tu, Shengxian; Fujino, Yusuke; Mitsouras, Dimitrios; Doulaverakis, Charalampos; Tsampoulatidis, Ioannis; Koutkias, Vassilis G; Bouki, Konstantina; Li, Yingguang; Chouvarda, Ioanna; Cheimariotis, Grigorios; Maglaveras, Nicos; Kompatsiaris, Ioannis; Nakamura, Sunao; Reiber, Johan H C; Rybicki, Frank; Karvounis, Haralambos; Stefanadis, Christodoulos; Tousoulis, Dimitris; Giannoglou, George D

2015-06-01

Geometrically-correct 3D OCT is a new imaging modality with the potential to investigate the association of local hemodynamic microenvironment with OCT-derived high-risk features. We aimed to describe the methodology of 3D OCT and investigate the accuracy, inter- and intra-observer agreement of 3D OCT in reconstructing coronary arteries and calculating ESS, using 3D IVUS and 3D QCA as references. 35 coronary artery segments derived from 30 patients were reconstructed in 3D space using 3D OCT. 3D OCT was validated against 3D IVUS and 3D QCA. The agreement in artery reconstruction among 3D OCT, 3D IVUS and 3D QCA was assessed in 3-mm-long subsegments using lumen morphometry and ESS parameters. The inter- and intra-observer agreement of 3D OCT, 3D IVUS and 3D QCA were assessed in a representative sample of 61 subsegments (n = 5 arteries). The data processing times for each reconstruction methodology were also calculated. There was a very high agreement between 3D OCT vs. 3D IVUS and 3D OCT vs. 3D QCA in terms of total reconstructed artery length and volume, as well as in terms of segmental morphometric and ESS metrics with mean differences close to zero and narrow limits of agreement (Bland-Altman analysis). 3D OCT exhibited excellent inter- and intra-observer agreement. The analysis time with 3D OCT was significantly lower compared to 3D IVUS. Geometrically-correct 3D OCT is a feasible, accurate and reproducible 3D reconstruction technique that can perform reliable ESS calculations in coronary arteries. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

48 CFR 3.1002 - Policy.

Science.gov (United States)

2010-10-01

... PRACTICES AND PERSONAL CONFLICTS OF INTEREST Contractor Code of Business Ethics and Conduct 3.1002 Policy.... (b) Contractors should have a written code of business ethics and conduct. To promote compliance with such code of business ethics and conduct, contractors should have an employee business ethics and...

The 3d8-(3d74p + 3p53d9) transitions in Br X: A striking case of configuration interaction

International Nuclear Information System (INIS)

Kleef, T.A.M. van; Uylings, P.H.M.; Ryabtsev, A.N.; Podobedova, L.I.; Joshi, Y.N.

1988-01-01

The spectrum of nine times ionized bromine (Br X) was photographed in the 90-120 A wavelength region on a variety of grazing incidence spectrographs using an open spark and a triggered spark as light sources. The analysis of the 3d 8 -(3d 7 4p + 3p 5 3d 9 ) transitions has resulted in establishing all 9 levels of the 3d 8 configuration, all 12 levels of the 3p 5 3d 9 configuration and 99 out of 110 levels of the 3d 7 4p configuration. The excitation probability of the 3p inner-shell electron increases with nuclear charge and in Br X is comparable with the excitation probability of the optical electrons resulting in a very strong configuration interaction between the 3p 5 3d 9 and 3d 7 4p configurations. Parametric calculations treating these configurations as one super configuration support the analysis. Two hundred and thirty two lines have been classified in this spectrum. (orig.)

ROOFN3D: DEEP LEARNING TRAINING DATA FOR 3D BUILDING RECONSTRUCTION

Directory of Open Access Journals (Sweden)

A. Wichmann

2018-05-01

Full Text Available Machine learning methods have gained in importance through the latest development of artificial intelligence and computer hardware. Particularly approaches based on deep learning have shown that they are able to provide state-of-the-art results for various tasks. However, the direct application of deep learning methods to improve the results of 3D building reconstruction is often not possible due, for example, to the lack of suitable training data. To address this issue, we present RoofN3D which provides a new 3D point cloud training dataset that can be used to train machine learning models for different tasks in the context of 3D building reconstruction. It can be used, among others, to train semantic segmentation networks or to learn the structure of buildings and the geometric model construction. Further details about RoofN3D and the developed data preparation framework, which enables the automatic derivation of training data, are described in this paper. Furthermore, we provide an overview of other available 3D point cloud training data and approaches from current literature in which solutions for the application of deep learning to unstructured and not gridded 3D point cloud data are presented.

Comparative evaluation of HD 2D/3D laparoscopic monitors and benchmarking to a theoretically ideal 3D pseudodisplay: even well-experienced laparoscopists perform better with 3D.

Science.gov (United States)

Wilhelm, D; Reiser, S; Kohn, N; Witte, M; Leiner, U; Mühlbach, L; Ruschin, D; Reiner, W; Feussner, H

2014-08-01

Though theoretically superior to standard 2D visualization, 3D video systems have not yet achieved a breakthrough in laparoscopy. The latest 3D monitors, including autostereoscopic displays and high-definition (HD) resolution, are designed to overcome the existing limitations. We performed a randomized study on 48 individuals with different experience levels in laparoscopy. Three different 3D displays (glasses-based 3D monitor, autostereoscopic display, and a mirror-based theoretically ideal 3D display) were compared to a 2D HD display by assessing multiple performance and mental workload parameters and rating the subjects during a laparoscopic suturing task. Electromagnetic tracking provided information on the instruments' pathlength, movement velocity, and economy. The usability, the perception of visual discomfort, and the quality of image transmission of each monitor were subjectively rated. Almost all performance parameters were superior with the conventional glasses-based 3D display compared to the 2D display and the autostereoscopic display, but were often significantly exceeded by the mirror-based 3D display. Subjects performed a task faster and with greater precision when visualization was achieved with the 3D and the mirror-based display. Instrument pathlength was shortened by improved depth perception. Workload parameters (NASA TLX) did not show significant differences. Test persons complained of impaired vision while using the autostereoscopic monitor. The 3D and 2D displays were rated user-friendly and applicable in daily work. Experienced and inexperienced laparoscopists profited equally from using a 3D display, with an improvement in task performance about 20%. Novel 3D displays improve laparoscopic interventions as a result of faster performance and higher precision without causing a higher mental workload. Therefore, they have the potential to significantly impact the further development of minimally invasive surgery. However, as shown by the

Minimally invasive vascular imaging using 3D-CTA and 3D-MRA. Update

International Nuclear Information System (INIS)

Hayashi, Hiromitsu; Kawamata, Hiroshi; Takagi, Ryo; Amano, Yasuo; Wakabayashi, Hiroyuki; Ichikawa, Kazuo; Kumazaki, Tatsuo

1998-01-01

Conventional angiography is considered the standard of reference for diagnostic imaging of vascular diseases with respect to its temporal and spatial resolution. This procedure, however is invasive and repeated studies are difficult, and arterial complications are occasionally associated in catheter-based conventional angiography. Recent advances in diagnostic imaging have facilitated three-dimensional CT angiography (3D-CTA) using the volumetric acquisition capabilities inherent in spiral CT and three-dimensional MR angiography (3D-MRA) using the 3D gradient-echo sequence with a bolus injection of Gd-DTPA. These techniques can provide vascular images exceedingly similar to conventional angiograms within a short acquisition time. 3D-CTA and 3D-MRA are considered to be promising, minimally invasive methods for obtaining images of the vasculature, and alternatives to catheter angiography. This study reviews the current status of 3D-CTA and 3D-MRA, with emphasis on the clinical usefulness of three-dimensional diagnostic imaging for the evaluation of diverse vascular pathologies. (author)

3dRPC: a web server for 3D RNA-protein structure prediction.

Science.gov (United States)

Huang, Yangyu; Li, Haotian; Xiao, Yi

2018-04-01

RNA-protein interactions occur in many biological processes. To understand the mechanism of these interactions one needs to know three-dimensional (3D) structures of RNA-protein complexes. 3dRPC is an algorithm for prediction of 3D RNA-protein complex structures and consists of a docking algorithm RPDOCK and a scoring function 3dRPC-Score. RPDOCK is used to sample possible complex conformations of an RNA and a protein by calculating the geometric and electrostatic complementarities and stacking interactions at the RNA-protein interface according to the features of atom packing of the interface. 3dRPC-Score is a knowledge-based potential that uses the conformations of nucleotide-amino-acid pairs as statistical variables and that is used to choose the near-native complex-conformations obtained from the docking method above. Recently, we built a web server for 3dRPC. The users can easily use 3dRPC without installing it locally. RNA and protein structures in PDB (Protein Data Bank) format are the only needed input files. It can also incorporate the information of interface residues or residue-pairs obtained from experiments or theoretical predictions to improve the prediction. The address of 3dRPC web server is http://biophy.hust.edu.cn/3dRPC. yxiao@hust.edu.cn.

Vitamin D3 increases in abdominal subcutaneous fat tissue after supplementation with vitamin D3

DEFF Research Database (Denmark)

Didriksen, Allan; Burild, Anders; Jakobsen, Jette

2015-01-01

stored in all adipose tissue in the body, the median body store was 6.6 mg vitamin D-3 and 0.12 mg 25(OH)D-3 in those given vitamin D-3. Conclusions: Subcutaneous adipose tissue may store large amounts of vitamin D-3. The clinical importance of this storage needs to be determined.......Objective: The objective was to assess the amount of vitamin D-3 stored in adipose tissue after long-term supplementation with high dose vitamin D-3. Design: A cross-sectional study on 29 subjects with impaired glucose tolerance who had participated in a randomized controlled trial with vitamin D-3...... 20 000 IU (500 mu g) per week vs placebo for 3-5 years. Methods: Abdominal subcutaneous fat tissue was obtained by needle biopsy for the measurements of vitamin D-3 and 25-hydroxyvitamin D-3 (25(OH)D-3). Body fat was measured with dual-energy X-ray absorptiometry, and serum 25(OH)D-3 level...

3D analysis of semiconductor devices: A combination of 3D imaging and 3D elemental analysis

Science.gov (United States)

Fu, Bianzhu; Gribelyuk, Michael A.

2018-04-01

3D analysis of semiconductor devices using a combination of scanning transmission electron microscopy (STEM) Z-contrast tomography and energy dispersive spectroscopy (EDS) elemental tomography is presented. 3D STEM Z-contrast tomography is useful in revealing the depth information of the sample. However, it suffers from contrast problems between materials with similar atomic numbers. Examples of EDS elemental tomography are presented using an automated EDS tomography system with batch data processing, which greatly reduces the data collection and processing time. 3D EDS elemental tomography reveals more in-depth information about the defect origin in semiconductor failure analysis. The influence of detector shadowing and X-rays absorption on the EDS tomography's result is also discussed.

32 CFR 322.3 - Policy.

Science.gov (United States)

2010-07-01

... SECURITY AGENCY/CENTRAL SECURITY SERVICES PRIVACY ACT PROGRAM § 322.3 Policy. (a) The National Security Agency/Central Security Service shall maintain in its records only such information about an individual... defined in § 322.7, and legal requirements to protect sensitive NSA information such as the intelligence...

32 CFR 172.3 - Policy.

Science.gov (United States)

2010-07-01

... SALES OF SURPLUS PERSONAL PROPERTY § 172.3 Policy. (a) Cash or cash equivalents in the prescribed amounts shall accompany bid deposits for a bid to be considered responsive. Similarly, cash or cash...-level costs incurred in operation of the recyclable program. (2) After reimbursement of the cost...

An amalgamation of 3D city models in urban air quality modelling for improving visual impact analysis

DEFF Research Database (Denmark)

Ujang, U.; Anton, F.; Ariffin, A.

2015-01-01

is predominantly vehicular engines, the situation will become worse when pollutants are trapped between buildings and disperse inside the street canyon and move vertically to create a recirculation vortex. Studying and visualizing the recirculation zone in 3D visualization is conceivable by using 3D city models......,engineers and policy makers to design the street geometry (building height and width, green areas, pedestrian walks, roads width, etc.)....

Summary report on urban energy planning

DEFF Research Database (Denmark)

Fertner, Christian; Große, Juliane; Groth, Niels Boje

Based on the case study (Deliverables 4.2) as well as the thematic (Deliverable 4.3) work, a list of 29 spatial planning measures and policies was elaborated. The measures can increase energy efficiency, reduce energy use or increasing the share of renewable energy in a city. In the main part...... should take into consideration when working on their Energy Efficiency Action Plans: (1) How can spatial planning reduce energy use in our cities? (2) How do different geographical, regional, cultural or political contexts influence options? (3) How can we measure and monitor its effects? (4) What...

TU-C-17A-06: Evaluating IMRT Plan Deliverability Via PTV Shape and MLC Motion

International Nuclear Information System (INIS)

McGurk, R; Smith, VA; Price, M

2014-01-01

Purpose: For step-and-shoot intensity-modulated radiation therapy (IMRT) plans, the dosimetry and deliverability can be affected by the number and shape of the segments used. Thus, plan deliverability is likely related to target volume and shape. We investigated whether the sphericity of target volumes and the previously proposed Modulation Complexity Score (MCS) could be used together to improve the detection of IMRT fields that failed quality assurance (QA). Methods: 526 and 353 IMRT fields from 32 prostate and 28 head-and-neck (H'N) patients, respectively, were analyzed. MCS was used to quantify the complexity of multi-leaf collimator shapes and motion patterns for each field. Sphericity was calculated using the surface area and volume of each patient’s planning target volume (PTV). Logistic regression models with MCS-alone or MCS and sphericity terms were fit to PlanUNC IMRT pass/fail results (5% dose difference, 4mm distance-to-agreement criteria) using SAS 9.3 (Cary, NC). Model concordance, discordance and area under the curve (AUC) were used to quantify model accuracy. Results: Mean (±1 standard deviation) MCS for prostate and H'N were 0.58(±0.15) and 0.40 (±0.14), respectively. Mean sphericity scores were 0.75(±0.05) for prostate and 0.63 (±0.12) for H'N. Both metrics were significantly different between treatment locations (p<0.01, Wilcoxon Rank Sum Test) indicating greater complexity in shape and variations for H'N PTVs. For prostate, concordance, discordance and AUC using MCS alone were 80.8%, 18.7% and 0.811. Including sphericity in the model improved these to 81.7%, 17.7% and 0.820. For H'N, the original concordance, discordance and AUC were of 72.9%, 26.9% and 0.729. Including sphericity into the model improved these metrics to 76.5%, 23.2% and 0.729. Conclusion: Sphericity provides a quantitative measure of PTV shape. While improvement in IMRT QA failure detection was modest for both prostate and H'N plans

Vitamin D-3 and 25-hydroxyvitamin D-3 in raw and cooked pork cuts

DEFF Research Database (Denmark)

Clausen, Ina; Jakobsen, Jette; Leth, Torben

2003-01-01

The contents of vitamin D-3 and its metabolically active metabolite 25-hydroxyvitamin D-3 (25OHD(3)) were examined by HPLC in different parts of four common raw pork cuts (loin boneless, leg inside, thin belly, neck) and in cooked meat (loin boneless). In whole raw pork cuts, varying in fat content......, and that rind, despite its limited fat content, has a high concentration of vitamin D-3 and 25OHD(3). Cooking increased vitamin D-3 and 25OHD(3) calculated per 100 g of tissue in all parts and in the whole cut (in whole cuts in raw and cooked meat, respectively: vitamin D-3: 0.15 (0.08-0.24) mug/100 g and 0...... 25OHD(3) contributes significantly to vitamin D activity. Food databases should include concentrations of both vitamin D and 25OHD(3). (C) 2003 Elsevier Ltd. All rights reserved....

D 6.1 Interim biocomposite evaluation review

OpenAIRE

Pinto, A.; Tjeerdsma, B.; Pina dos Santos, C.; Perremans, D.; Carra, G.; Bermejo, J.; Custódio, J.; Viegas, J.; Patrício, J.; Dzalto, J.; Ribeiro Nunes, L. M.; Real, L. P.; Veras, M.; Rodrigues, M. P.

2013-01-01

Este registo pertence ao Repositório Científico do LNEC This deliverable is a review report which evaluates the progress and feasibility of the biocomposite systems, designs and installations, taking into account the information resulting from the work developed in the aim of Biobuild project. The main steps followed in the project up to this moment to develop bio-systems with such characteristics can be summarized as follows: · Use of additives and modifications to create d...

Structure of the Human Dopamine D3 Receptor in Complex with a D2/D3 Selective Antagonist

Energy Technology Data Exchange (ETDEWEB)

Chien, Ellen Y.T.; Liu, Wei; Zhao, Qiang; Katritch, Vsevolod; Han, Gye Won; Hanson, Michael A.; Shi, Lei; Newman, Amy Hauck; Javitch, Jonathan A.; Cherezov, Vadim; Stevens, Raymond C. (Cornell); (Scripps); (NIDA); (Columbia); (UCSD); (Receptos)

2010-11-30

Dopamine modulates movement, cognition, and emotion through activation of dopamine G protein-coupled receptors in the brain. The crystal structure of the human dopamine D3 receptor (D3R) in complex with the small molecule D2R/D3R-specific antagonist eticlopride reveals important features of the ligand binding pocket and extracellular loops. On the intracellular side of the receptor, a locked conformation of the ionic lock and two distinctly different conformations of intracellular loop 2 are observed. Docking of R-22, a D3R-selective antagonist, reveals an extracellular extension of the eticlopride binding site that comprises a second binding pocket for the aryl amide of R-22, which differs between the highly homologous D2R and D3R. This difference provides direction to the design of D3R-selective agents for treating drug abuse and other neuropsychiatric indications.

Open 3D Projects

Directory of Open Access Journals (Sweden)

Felician ALECU

2010-01-01

Full Text Available Many professionals and 3D artists consider Blender as being the best open source solution for 3D computer graphics. The main features are related to modeling, rendering, shading, imaging, compositing, animation, physics and particles and realtime 3D/game creation.

Modification of 3D milling machine to 3D printer

OpenAIRE

Taska, Abraham

2014-01-01

Tato práce se zabývá přestavbou gravírovací frézky na 3D tiskárnu. V první části se práce zabývá možnými technologiemi 3D tisku a možností jejich využití u přestavby. Dále jsou popsány a vybrány vhodné součásti pro přestavbu. V další části je realizováno řízení ohřevu podložky, trysky a řízení posuvu drátu pomocí softwaru TwinCat od společnosti Beckhoff na průmyslovém počítači. Výsledkem práce by měla být oživená 3D tiskárna. This thesis deals with rebuilding of engraving machine to 3D pri...

Anti-3D Weapon Model Detection for Safe 3D Printing Based on Convolutional Neural Networks and D2 Shape Distribution

Directory of Open Access Journals (Sweden)

Giao N. Pham

2018-03-01

Full Text Available With the development of 3D printing, weapons are easily printed without any restriction from the production managers. Therefore, anti-3D weapon model detection is necessary issue in safe 3D printing to prevent the printing of 3D weapon models. In this paper, we would like to propose an anti-3D weapon model detection algorithm to prevent the printing of anti-3D weapon models for safe 3D printing based on the D2 shape distribution and an improved convolutional neural networks (CNNs. The purpose of the proposed algorithm is to detect anti-3D weapon models when they are used in 3D printing. The D2 shape distribution is computed from random points on the surface of a 3D weapon model and their geometric features in order to construct a D2 vector. The D2 vector is then trained by improved CNNs. The CNNs are used to detect anti-3D weapon models for safe 3D printing by training D2 vectors which have been constructed from the D2 shape distribution of 3D weapon models. Experiments with 3D weapon models proved that the D2 shape distribution of 3D weapon models in the same class is the same. Training and testing results also verified that the accuracy of the proposed algorithm is higher than the conventional works. The proposed algorithm is applied in a small application, and it could detect anti-3D weapon models for safe 3D printing.

CASTLE3D - A Computer Aided System for Labelling Archaeological Excavations in 3D

Science.gov (United States)

Houshiar, H.; Borrmann, D.; Elseberg, J.; Nüchter, A.; Näth, F.; Winkler, S.

2015-08-01

Documentation of archaeological excavation sites with conventional methods and tools such as hand drawings, measuring tape and archaeological notes is time consuming. This process is prone to human errors and the quality of the documentation depends on the qualification of the archaeologist on site. Use of modern technology and methods in 3D surveying and 3D robotics facilitate and improve this process. Computer-aided systems and databases improve the documentation quality and increase the speed of data acquisition. 3D laser scanning is the state of the art in modelling archaeological excavation sites, historical sites and even entire cities or landscapes. Modern laser scanners are capable of data acquisition of up to 1 million points per second. This provides a very detailed 3D point cloud of the environment. 3D point clouds and 3D models of an excavation site provide a better representation of the environment for the archaeologist and for documentation. The point cloud can be used both for further studies on the excavation and for the presentation of results. This paper introduces a Computer aided system for labelling archaeological excavations in 3D (CASTLE3D). Consisting of a set of tools for recording and georeferencing the 3D data from an excavation site, CASTLE3D is a novel documentation approach in industrial archaeology. It provides a 2D and 3D visualisation of the data and an easy-to-use interface that enables the archaeologist to select regions of interest and to interact with the data in both representations. The 2D visualisation and a 3D orthogonal view of the data provide cuts of the environment that resemble the traditional hand drawings. The 3D perspective view gives a realistic view of the environment. CASTLE3D is designed as an easy-to-use on-site semantic mapping tool for archaeologists. Each project contains a predefined set of semantic information that can be used to label findings in the data. Multiple regions of interest can be joined under

Do-It-Yourself: 3D Models of Hydrogenic Orbitals through 3D Printing

Science.gov (United States)

Griffith, Kaitlyn M.; de Cataldo, Riccardo; Fogarty, Keir H.

2016-01-01

Introductory chemistry students often have difficulty visualizing the 3-dimensional shapes of the hydrogenic electron orbitals without the aid of physical 3D models. Unfortunately, commercially available models can be quite expensive. 3D printing offers a solution for producing models of hydrogenic orbitals. 3D printing technology is widely…

3D motion graphics for 2D artists conquering the 3rd dimension

CERN Document Server

Byrne, Bill

2011-01-01

Add 3D to your mograph skillset! For the experienced 2D artist, this lavishly illustrated, 4 color book presents the essentials to building and compositing 3D elements into your 2D world of film and broadcast. Concepts and techniques are presented in concise, step-by-step tutorials, hundreds of which are featured throughout. Featured applications include Photoshop, Illustrator, After Effects, and Cinema 4D. Lessons include exploring the expanded 3D functionality of the Adobe Creative Suite applications (After Effects, Photoshop, and Illustrator) through a series of practical tutorials. More

An Investigation of Creative Climate of University R&D Centers and Policy Implications for Innovation in China

DEFF Research Database (Denmark)

Zhou, Chunfang; Rasmussen, Palle; Chemi, Tatiana

2017-01-01

The chapter focuses on the influences of science and technology (S&T) policies on creative climate of university R&D centers in China that provide policy implications for improving roles of university R&D in innovation system. The empirical data came from two questionnaire surveys, one...... is with members from R&D centers, another with leaders of S&T fund management sectors in universities. The results demonstrate both strengths and weaknesses of creative climate of university R&D centers. This leads to implications such as to improve a more comprehensive innovation Measurement system and to build...

3D Systems” ‘Stuck in the Middle’ of the 3D Printer Boom?

NARCIS (Netherlands)

A. Hoffmann (Alan)

2014-01-01

textabstract3D Systems, the pioneer of 3D printing, predicted a future where "kids from 8 to 80" could design and print their ideas at home. By 2013, 9 years after the creation of the first working 3D printer, there were more than 30 major 3D printing companies competing for market share. 3DS and

FUN3D Manual: 13.3

Science.gov (United States)

Biedron, Robert T.; Carlson, Jan-Renee; Derlaga, Joseph M.; Gnoffo, Peter A.; Hammond, Dana P.; Jones, William T.; Kleb, Bil; Lee-Rausch, Elizabeth M.; Nielsen, Eric J.; Park, Michael A.;

3D deblending of simultaneous source data based on 3D multi-scale shaping operator

Science.gov (United States)

Zu, Shaohuan; Zhou, Hui; Mao, Weijian; Gong, Fei; Huang, Weilin

2018-04-01

We propose an iterative three-dimensional (3D) deblending scheme using 3D multi-scale shaping operator to separate 3D simultaneous source data. The proposed scheme is based on the property that signal is coherent, whereas interference is incoherent in some domains, e.g., common receiver domain and common midpoint domain. In two-dimensional (2D) blended record, the coherency difference of signal and interference is in only one spatial direction. Compared with 2D deblending, the 3D deblending can take more sparse constraints into consideration to obtain better performance, e.g., in 3D common receiver gather, the coherency difference is in two spatial directions. Furthermore, with different levels of coherency, signal and interference distribute in different scale curvelet domains. In both 2D and 3D blended records, most coherent signal locates in coarse scale curvelet domain, while most incoherent interference distributes in fine scale curvelet domain. The scale difference is larger in 3D deblending, thus, we apply the multi-scale shaping scheme to further improve the 3D deblending performance. We evaluate the performance of 3D and 2D deblending with the multi-scale and global shaping operators, respectively. One synthetic and one field data examples demonstrate the advantage of the 3D deblending with 3D multi-scale shaping operator.

Underwater 3D filming

Directory of Open Access Journals (Sweden)

Roberto Rinaldi

2014-12-01

Full Text Available After an experimental phase of many years, 3D filming is now effective and successful. Improvements are still possible, but the film industry achieved memorable success on 3D movie’s box offices due to the overall quality of its products. Special environments such as space (“Gravity” and the underwater realm look perfect to be reproduced in 3D. “Filming in space” was possible in “Gravity” using special effects and computer graphic. The underwater realm is still difficult to be handled. Underwater filming in 3D was not that easy and effective as filming in 2D, since not long ago. After almost 3 years of research, a French, Austrian and Italian team realized a perfect tool to film underwater, in 3D, without any constrains. This allows filmmakers to bring the audience deep inside an environment where they most probably will never have the chance to be.

3D histomorphometric quantification from 3D computed tomography

International Nuclear Information System (INIS)

Oliveira, L.F. de; Lopes, R.T.

2004-01-01

The histomorphometric analysis is based on stereologic concepts and was originally applied to biologic samples. This technique has been used to evaluate different complex structures such as ceramic filters, net structures and cancellous objects that are objects with inner connected structures. The measured histomorphometric parameters of structure are: sample volume to total reconstructed volume (BV/TV), sample surface to sample volume (BS/BV), connection thickness (Tb Th ), connection number (Tb N ) and connection separation (Tb Sp ). The anisotropy was evaluated as well. These parameters constitute the base of histomorphometric analysis. The quantification is realized over cross-sections recovered by cone beam reconstruction, where a real-time microfocus radiographic system is used as tomographic system. The three-dimensional (3D) histomorphometry, obtained from tomography, corresponds to an evolution of conventional method that is based on 2D analysis. It is more coherent with morphologic and topologic context of the sample. This work shows result from 3D histomorphometric quantification to characterize objects examined by 3D computer tomography. The results, which characterizes the internal structures of ceramic foams with different porous density, are compared to results from conventional methods

Scoops3D: software to analyze 3D slope stability throughout a digital landscape

Science.gov (United States)

Reid, Mark E.; Christian, Sarah B.; Brien, Dianne L.; Henderson, Scott T.

2015-01-01

The computer program, Scoops3D, evaluates slope stability throughout a digital landscape represented by a digital elevation model (DEM). The program uses a three-dimensional (3D) method of columns approach to assess the stability of many (typically millions) potential landslides within a user-defined size range. For each potential landslide (or failure), Scoops3D assesses the stability of a rotational, spherical slip surface encompassing many DEM cells using a 3D version of either Bishop’s simplified method or the Ordinary (Fellenius) method of limit-equilibrium analysis. Scoops3D has several options for the user to systematically and efficiently search throughout an entire DEM, thereby incorporating the effects of complex surface topography. In a thorough search, each DEM cell is included in multiple potential failures, and Scoops3D records the lowest stability (factor of safety) for each DEM cell, as well as the size (volume or area) associated with each of these potential landslides. It also determines the least-stable potential failure for the entire DEM. The user has a variety of options for building a 3D domain, including layers or full 3D distributions of strength and pore-water pressures, simplistic earthquake loading, and unsaturated suction conditions. Results from Scoops3D can be readily incorporated into a geographic information system (GIS) or other visualization software. This manual includes information on the theoretical basis for the slope-stability analysis, requirements for constructing and searching a 3D domain, a detailed operational guide (including step-by-step instructions for using the graphical user interface [GUI] software, Scoops3D-i) and input/output file specifications, practical considerations for conducting an analysis, results of verification tests, and multiple examples illustrating the capabilities of Scoops3D. Easy-to-use software installation packages are available for the Windows or Macintosh operating systems; these packages

E-learning Programmes and Courses Evaluation Report

DEFF Research Database (Denmark)

Badger, Merete; Prag, Sidsel-Marie Winther; Monaco, Lucio

the development, testing, and evaluation of a series of applications for training and entrepreneurship in the field of sustainable energy (project work package 2, 3, and 4). This report describes the project outcomes related to this work stream with focus on E-learning programmes and courses. It represents...... the project deliverable “D3.4 E-learning Programmes and Courses Evaluation Report”. The applications developed for entrepreneurship will be described and evaluated in the project deliverable “D4.3 e-link evaluation report”. The second work stream (work package 5) covers the development of E......-infrastructure eduGAIN2. The access point is a web portal – the VCH Portal – which is used to manage users and groups. The E-infrastructure of VCH will be described and evaluated in the project deliverable “5.4 Virtual Campus Hub Technology Evaluation Report”. The E-learning applications described in this report...

MAP3D: a media processor approach for high-end 3D graphics

Science.gov (United States)

Darsa, Lucia; Stadnicki, Steven; Basoglu, Chris

1999-12-01

Equator Technologies, Inc. has used a software-first approach to produce several programmable and advanced VLIW processor architectures that have the flexibility to run both traditional systems tasks and an array of media-rich applications. For example, Equator's MAP1000A is the world's fastest single-chip programmable signal and image processor targeted for digital consumer and office automation markets. The Equator MAP3D is a proposal for the architecture of the next generation of the Equator MAP family. The MAP3D is designed to achieve high-end 3D performance and a variety of customizable special effects by combining special graphics features with high performance floating-point and media processor architecture. As a programmable media processor, it offers the advantages of a completely configurable 3D pipeline--allowing developers to experiment with different algorithms and to tailor their pipeline to achieve the highest performance for a particular application. With the support of Equator's advanced C compiler and toolkit, MAP3D programs can be written in a high-level language. This allows the compiler to successfully find and exploit any parallelism in a programmer's code, thus decreasing the time to market of a given applications. The ability to run an operating system makes it possible to run concurrent applications in the MAP3D chip, such as video decoding while executing the 3D pipelines, so that integration of applications is easily achieved--using real-time decoded imagery for texturing 3D objects, for instance. This novel architecture enables an affordable, integrated solution for high performance 3D graphics.

The 3d84s and 3d84d configurations of the fourth spectrum of zinc: Zn IV

International Nuclear Information System (INIS)

Joshi, Y.N.; Van Kleef, T.A.M.

1987-01-01

The spectrum of zinc was photographed in the region 2000 A - 820 A on a 6.65 m and a 10.7 m normal incidence spectrograph using a sliding spark and a triggered spark source. The new measurements have helped us to confirm the earlier analysis of the 3d 8 4s-3d 8 4p transitions and locate the missing level 3d 8 4s 2 S 1/2 , and study the 3d 8 4p-3d 8 4d transitions. 59 out of 67 levels of the 3d 8 4d configuration have been established. Parametric least-squares-fitted calculations support the analysis. Two hundred and eight (208) additional lines have been classified in the Zn IV analysis. (orig.)

Acquiring 3D scene information from 2D images

NARCIS (Netherlands)

Li, Ping

2011-01-01

In recent years, people are becoming increasingly acquainted with 3D technologies such as 3DTV, 3D movies and 3D virtual navigation of city environments in their daily life. Commercial 3D movies are now commonly available for consumers. Virtual navigation of our living environment as used on a

2D-Driven 3D Object Detection in RGB-D Images

KAUST Repository

Lahoud, Jean; Ghanem, Bernard

2017-01-01

In this paper, we present a technique that places 3D bounding boxes around objects in an RGB-D scene. Our approach makes best use of the 2D information to quickly reduce the search space in 3D, benefiting from state-of-the-art 2D object detection

webinos project deliverable: Phase 1 Security Framework

OpenAIRE

webinos consortium

2011-01-01

The webinos project aims to deliver a cross-device web application runtime environment, providing a unified development platform and standardized inter-device communication and interaction. This document contains the first iteration of the technical security and privacy framework designed for the webinos project. It accompanies two other documents - D3.1 System Specification and D3.2 API Specifications - and refers to concepts developed in them. The security and privacy architecture aims to p...

3D FaceCam: a fast and accurate 3D facial imaging device for biometrics applications

Science.gov (United States)

Geng, Jason; Zhuang, Ping; May, Patrick; Yi, Steven; Tunnell, David

2004-08-01

Human faces are fundamentally three-dimensional (3D) objects, and each face has its unique 3D geometric profile. The 3D geometric features of a human face can be used, together with its 2D texture, for rapid and accurate face recognition purposes. Due to the lack of low-cost and robust 3D sensors and effective 3D facial recognition (FR) algorithms, almost all existing FR systems use 2D face images. Genex has developed 3D solutions that overcome the inherent problems in 2D while also addressing limitations in other 3D alternatives. One important aspect of our solution is a unique 3D camera (the 3D FaceCam) that combines multiple imaging sensors within a single compact device to provide instantaneous, ear-to-ear coverage of a human face. This 3D camera uses three high-resolution CCD sensors and a color encoded pattern projection system. The RGB color information from each pixel is used to compute the range data and generate an accurate 3D surface map. The imaging system uses no moving parts and combines multiple 3D views to provide detailed and complete 3D coverage of the entire face. Images are captured within a fraction of a second and full-frame 3D data is produced within a few seconds. This described method provides much better data coverage and accuracy in feature areas with sharp features or details (such as the nose and eyes). Using this 3D data, we have been able to demonstrate that a 3D approach can significantly improve the performance of facial recognition. We have conducted tests in which we have varied the lighting conditions and angle of image acquisition in the "field." These tests have shown that the matching results are significantly improved when enrolling a 3D image rather than a single 2D image. With its 3D solutions, Genex is working toward unlocking the promise of powerful 3D FR and transferring FR from a lab technology into a real-world biometric solution.

3D-modeling and 3D-printing explorations on Japanese tea ceremony utensils

NARCIS (Netherlands)

Levy, P.D.; Yamada, Shigeru

2017-01-01

In this paper, we inquire aesthetical aspects of the Japanese tea ceremony, described as the aesthetics in the imperfection, based on novel fabrication technologies: 3D-modeling and 3D-printing. To do so, 3D-printed utensils (chashaku and chasen) were iteratively designed for the ceremony and were

3D printing for dummies

CERN Document Server

Hausman, Kalani Kirk

2014-01-01

Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer just a figment of your imagination. This remarkable technology is coming to the masses with the growing availability of 3D printers. 3D printers create 3-dimensional layered models and they allow users to create prototypes that use multiple materials and colors.  This friendly-but-straightforward guide examines each type of 3D printing technology available today and gives artists, entrepreneurs, engineers, and hobbyists insight into the amazing things 3D printing has to offer. You'll discover methods for

Deliverable 7.1: Legal Framework and Legal Barriers to an Offshore HVDC Electricity Grid in the North Sea : Intermediate Report for Stakeholder Review

NARCIS (Netherlands)

Nieuwenhout, C.T.

The present deliverable elaborates the current legal framework for offshore wind and grid development on international, European and national level. It is shown that often, the legal framework needs to be adapted in order to facilitate the development of a meshed offshore electricity grid. This is

Kuvaus 3D-tulostamisesta hammastekniikassa

OpenAIRE

Munne, Mauri; Mustonen, Tuomas; Vähäjylkkä, Jaakko

2013-01-01

3D-tulostaminen kehittyy nopeasti ja yleistyy koko ajan. Tulostimien tarkkuuksien kehittyessä 3D-tulostus on ottamassa myös jalansijaa hammastekniikan alalta. Tämän opinnäytetyön tarkoituksena on kuvata 3D-tulostamisen tilaa hammastekniikassa. 3D-tulostaminen on Suomessa vielä melko harvinaista, joten opinnäytetyön tavoitteena on koota yhteen kaikki mahdollinen tieto liittyen 3D-tulostamiseen hammastekniikassa. Tavoitteena on myös 3D-tulostimen testaaminen käytännössä aina suun skannaami...

The dimension added by 3D scanning and 3D printing of meteorites

Science.gov (United States)

de Vet, S. J.

2016-01-01

An overview for the 3D photodocumentation of meteorites is presented, focussing on two 3D scanning methods in relation to 3D printing. The 3D photodocumention of meteorites provides new ways for the digital preservation of culturally, historically or scientifically unique meteorites. It has the potential for becoming a new documentation standard of meteorites that can exist complementary to traditional photographic documentation. Notable applications include (i.) use of physical properties in dark flight-, strewn field-, or aerodynamic modelling; (ii.) collection research of meteorites curated by different museum collections, and (iii.) public dissemination of meteorite models as a resource for educational users. The possible applications provided by the additional dimension of 3D illustrate the benefits for the meteoritics community.

3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation

Directory of Open Access Journals (Sweden)

Buranský Ivan

2016-09-01

Full Text Available The article is focused on optimization of four-facet drill for 3D drilling numerical modelling. For optimization, the process of reverse engineering by PowerShape software was used. The design of four-facet drill was created in NumrotoPlus software. The modified 3D model of the drill was used in the numerical analysis of cutting forces. Verification of the accuracy of 3D models for reverse engineering was implemented using the colour deviation maps. The CAD model was in the STEP format. For simulation software, 3D model in the STEP format is ideal. STEP is a solid model. Simulation software automatically splits the 3D model into finite elements. The STEP model was therefore more suitable than the STL model.

Signal alteration of the cochlear perilymph on 3 different sequences after intratympanic Gd-DTPA administration at 3 tesla. Comparison of 3D-FLAIR, 3D-T1-weighted imaging, and 3D-CISS

International Nuclear Information System (INIS)

Yamazaki, Masahiro; Naganawa, Shinji; Kawai, Hisashi; Nihashi, Takashi; Nakashima, Tsutomu

2010-01-01

Three-dimensional fluid-attenuated inversion recovery (3D-FLAIR) imaging after intratympanic gadolinium injection is useful for pathophysiologic and morphologic analysis of the inner ear. However, statistical analysis of differences in inner ear signal intensity among 3D-FLAIR and other sequences has not been reported. We evaluated the signal intensity of cochlear fluid on each of 3D-FLAIR, 3D-T 1 -weighted imaging (T 1 WI), and 3D-constructive interference in the steady state (CISS) to clarify the differences in contrast effect among these 3 sequences using intratympanic gadolinium injection. Twenty-one patients underwent 3D-FLAIR, 3D-T 1 WI, and 3D-CISS imaging at 3 tesla 24 hours after intratympanic injection of gadolinium. We determined regions of interest of the cochleae (C) and medulla oblongata (M) on each image, evaluated the signal intensity ratio between C and M (CM ratio), and determined the ratio of cochlear signal intensity of the injected side to that of the non-injected side (contrast value). The CM ratio of the injected side (3.00±1.31, range, 0.53 to 4.88, on 3D-FLAIR; 0.83±0.30, range, 0.36 to 1.58 on 3D-T 1 WI) was significantly higher than that of the non-injected side (0.52±0.14, range, 0.30 to 0.76 on 3D-FLAIR; 0.49±0.11, range, 0.30 to 0.71 on 3D-T 1 WI) on 3D-FLAIR and 3D-T 1 WI (P 1 WI (1.73±0.60 range, 0.98 to 3.09) (P<0.001). The 3D-FLAIR sequence is the most sensitive for observing alteration in inner ear fluid signal after intratympanic gadolinium injection. Our results warrant use of 3D-FLAIR as a sensitive imaging technique to clarify the pathological and morphological mechanisms of disorders of the inner ear. (author)

25-Hydroxyvitamin D-3 affects vitamin D status similar to vitamin D-3 in pigs - but the meat produced has a lower content of vitamin D

DEFF Research Database (Denmark)

Jakobsen, Jette; Maribo, H.; Bysted, Anette

2007-01-01

In food databases, the specific contents of vitamin D-3 and 25-hydroxyvitamin D-3 in food have been implemented in the last 10 years. No consensus has yet been established on the relative activity between the components. Therefore, the objective of the present study was to assess the relative...... activity of 25-hydroxyvitamin D-3 compared to vitamin D-3. The design was a parallel study in pigs (n 24), which from an age of 12 weeks until slaughter 11 weeks later were fed approximately 55 mu g vitamin D/d, as vitamin D-3, in a mixture of vitamin D-3 and 25-hydroxyvitamin D-3, or 25-hydroxyvitamin D-3....... The end-points measured were plasma 25-hydroxyvitamin D-3, and in the liver and loin the content of vitamin D-3 and 25-hydroxyvitamin D-3 Vitamin D-3 and 25-hydroxyvitamin D3 in the feed did not affect 25-hydroxyvitamin D-3 in the plasma, liver or loin differently, while a significant effect was shown...

The 3d4-3d34p transitions of triply ionized manganese (Mn IV)

International Nuclear Information System (INIS)

Tchang-Brillet, W.Ue.L.; Artru, M.C.; Wyart, J.F.

1986-01-01

The analysis of Mn IV is extended in the wavelength range 473-847 A. A total of 600 classified lines are given, of which 372 are newly observed. All of them are due to 3d 4 -3d 3 4p transitions. Their classification and the identification of 59 new levels are supported by the parametric studies of the 3d 4 and 3d 3 4p configurations. The ground configuration 3d 4 is calculated by taking into account the effective magnetic interactions which improve by an order of magnitude the theoretical fine structure of the quintet and triplet terms. The analysis was guided by the prediction of relative line strengths in intermediate coupling. Calculated energies and LS composition are given for all levels of the configuration, 3d 4 and 3d 3 4p. (orig).

3D-MR vs. 3D-CT of the shoulder in patients with glenohumeral instability

Energy Technology Data Exchange (ETDEWEB)

Stillwater, Laurence; Koenig, James; Maycher, Bruce; Davidson, Michael [University of Manitoba, Winnipeg (Canada)

2017-03-15

To determine whether 3D-MR osseous reformats of the shoulder are equivalent to 3D-CT osseous reformats in patients with glenohumeral instability. Patients with glenohumeral instability, who were to be imaged with both CT and MRI, were prospectively selected. CT and MR were performed within 24 h of one another on 12 shoulders. Each MR study included an axial 3D isotropic VIBE sequence. The image data from the isotropic VIBE sequence were post-processed using subtraction and 3D software. CT data were post-processed using 3D software. The following measurements were obtained for both 3D-CT and 3D-MR post-processed images: height and width of the humeral head and glenoid, Hill-Sachs size and percent humeral head loss (if present), size of glenoid bone loss and percent glenoid bone loss (if present). Paired t-tests and two one-sided tests for equivalence were used to assess the differences between imaging modalities and equivalence. The measurement differences from the 3D-CT and 3D-MR post-processed images were not statistically significant. The measurement differences for humeral height, glenoid height and glenoid width were borderline statistically significant; however, using any adjustment for multiple comparisons, this failed to be significant. Using an equivalence margin of 1 mm for measurements and 1.5% for percent bone loss, the 3D-MR and 3D-CT post-processed images were equivalent. Three-dimensional-MR osseous models of the shoulder using a 3D isotropic VIBE sequence were equivalent to 3D-CT osseous models, and the differences between modalities were not statistically significant. (orig.)

3D geometric phase analysis and its application in 3D microscopic morphology measurement

Science.gov (United States)

Zhu, Ronghua; Shi, Wenxiong; Cao, Quankun; Liu, Zhanwei; Guo, Baoqiao; Xie, Huimin

2018-04-01

Although three-dimensional (3D) morphology measurement has been widely applied on the macro-scale, there is still a lack of 3D measurement technology on the microscopic scale. In this paper, a microscopic 3D measurement technique based on the 3D-geometric phase analysis (GPA) method is proposed. In this method, with machine vision and phase matching, the traditional GPA method is extended to three dimensions. Using this method, 3D deformation measurement on the micro-scale can be realized using a light microscope. Simulation experiments were conducted in this study, and the results demonstrate that the proposed method has a good anti-noise ability. In addition, the 3D morphology of the necking zone in a tensile specimen was measured, and the results demonstrate that this method is feasible.

2D/3D/4D ULTRASOUND IN INFERTILITY MANAGEMENT

Directory of Open Access Journals (Sweden)

Uršula Reš-Muravec

2018-02-01

Ultrasound in infertility diagnostics: Ultrasound is used for examination of uterus, tubes, ovaries and peritoneal cause of infertility. It can be used in different menstrual phases: proliferative, periovulatory and secretory phase. Examination of uterus: A 2D scan can measure the size of the uterus (length, width and depth and a 2D flow (colour and power doppler. With 3D technology we can measure the whole volume with VOCAL (virtual organ computer-aided analysis and 3D circulation with the index (VI – vascular index, FI – flow index and VFI – vascular flow index in the uterus. A 2D scan can help us define uterine malformations, fibroids and adenomyosis to a certain extent. However, a 3D scan offers more accurate diagnosis of these malformations. Endometrium is examined separately. With 2D the width is measured and morphology and focal lesions (polyp, fibroids, adhesions are examined. With 3D the real sagital plane for the width measurement can be defined . We can measure the volume of endometrium and subendometrium and 3D circulation in endometrium and subendometrium. The FIS (f luid instlation sonography is very useful when examining the endometrium; saline or gel can be used for uterine instalation. We can measure and define the position of the structures in the endometrium more accurately when they are surrouned by saline or gel. We can view these structures with a surface view, similar to the one used for hysteroscopy. With this information we can explain the pathology to the patient and easily plan the surgical procedures. Examination of the tubes: With 2D US we can see the tubes in the pelvis only if there are dilatations, but sometimes it is difficult to distinguish them from the neighbouring forma- tions. With a 3D ultrasound we can define the shape and continuity of the tube and we can view the tube from different angles (inversion mode. Different contrast media are used for determining tubal patency. Tubal patency can be diagnosed with 2D Hy

3D Deep Learning Angiography (3D-DLA) from C-arm Conebeam CT.

Science.gov (United States)

Montoya, J C; Li, Y; Strother, C; Chen, G-H

2018-05-01

Deep learning is a branch of artificial intelligence that has demonstrated unprecedented performance in many medical imaging applications. Our purpose was to develop a deep learning angiography method to generate 3D cerebral angiograms from a single contrast-enhanced C-arm conebeam CT acquisition in order to reduce image artifacts and radiation dose. A set of 105 3D rotational angiography examinations were randomly selected from an internal data base. All were acquired using a clinical system in conjunction with a standard injection protocol. More than 150 million labeled voxels from 35 subjects were used for training. A deep convolutional neural network was trained to classify each image voxel into 3 tissue types (vasculature, bone, and soft tissue). The trained deep learning angiography model was then applied for tissue classification into a validation cohort of 8 subjects and a final testing cohort of the remaining 62 subjects. The final vasculature tissue class was used to generate the 3D deep learning angiography images. To quantify the generalization error of the trained model, we calculated the accuracy, sensitivity, precision, and Dice similarity coefficients for vasculature classification in relevant anatomy. The 3D deep learning angiography and clinical 3D rotational angiography images were subjected to a qualitative assessment for the presence of intersweep motion artifacts. Vasculature classification accuracy and 95% CI in the testing dataset were 98.7% (98.3%-99.1%). No residual signal from osseous structures was observed for any 3D deep learning angiography testing cases except for small regions in the otic capsule and nasal cavity compared with 37% (23/62) of the 3D rotational angiographies. Deep learning angiography accurately recreated the vascular anatomy of the 3D rotational angiography reconstructions without a mask. Deep learning angiography reduced misregistration artifacts induced by intersweep motion, and it reduced radiation exposure

3D-grafiikka ja pelimoottorit

OpenAIRE

Sillanpää, Otto

2014-01-01

Tässä opinnäytetyössä tutkitaan miten 3D-mallit saadaan sellaiseen muotoon, että ne olisivat käytettävissä eri pelimoottoreissa. Tutkimuksen tarkoituksena on selvittää, miten luodaan 3D-malleja pelimoottoreihin, sekä miten 3D-mallinnusohjelmat ja pelimoottorit eroavat toisistaan, kun käsitellään 3D-malleja. Tässä työssä pelimoottoreina toimivat Valven Source sekä Epic Gamesin Unreal Engine 3. 3D-mallinnusohjelmista käytössä olivat Autodeskin 3ds Max 2014 ja Blender Foundationin Blender 2.7...

10 CFR 784.3 - Policy.

Science.gov (United States)

2010-01-01

... concentration or the creation or maintenance of other situations inconsistent with the antitrust laws. (b) If it... PATENT WAIVER REGULATION § 784.3 Policy. (a) Section 6 of Public Law 96-517 (the Bayh-Dole patent and... Development Act of 1974, 42 U.S.C. 5908, Public Law 99-661, 42 U.S.C. 7261a, and, where not inconsistent...

Reactive flow simulation in complex 3D geometries using the COM3D code

International Nuclear Information System (INIS)

Breitung, W.; Kotchourko, A.; Veser, A.; Scholtyssek, W.

1999-01-01

The COM3D code, under development at the Forschungszentrum Karlsruhe (FZK), is a 3-d CFD code to describe turbulent combustion phenomena in complex geometries. It is intended to be part of the advanced integral code system for containment analysis (INCA) which includes in addition GASFLOW for distribution calculations, V3D for slow combustion and DET3D for detonation analysis. COM3D uses a TVD-solver and optional models for turbulence, chemistry and thermodynamics. The hydrodynamic model considers mass, momentum and energy conservation. Advanced procedures were provided to facilitate grid-development for complex 3-d structures. COM3D was validated on experiments performed on different scales with generally good agreement for important physical quantities. The code was applied to combustion analysis of a large PWR. The initial conditions were obtained from a GASFLOW distribution analysis for a LOOP scenario. Results are presented concerning flame propagation and pressure evolution in the containment which clearly demonstrate the effects of internal structures, their influence on turbulence formation and consequences for local loads. (author)

Offshore vertical wind shear: Final report on NORSEWInD’s work task 3.1

DEFF Research Database (Denmark)

Pena Diaz, Alfredo; Mikkelsen, Torben; Gryning, Sven-Erik

of power outputs. Background related to the parametrization of the vertical wind speed profile and the behavior of the vertical wind shear in and beyond the atmospheric surface layer is presented together with the application of the long-term atmospheric stability parameters for the analysis of the long......This document reports on the analysis performed by the work task 3.1 of the EU NORSEWInD project and includes the following deliverables: 3.2 Calculated vertical wind shears 3.3 Multi-variational correlation analysis 3.4 NWP data for wind shear model 3.5 Vertical extrapolation methodology 3.......6 Results input into satellite maps The nature of the offshore vertical wind shear is investigated using acquired data from the NORSEWInD network of mast and wind lidar stations. The importance of the knowledge of the vertical wind speed profile and wind shear is first illustrated for the evaluation...

3D Hilbert Space Filling Curves in 3D City Modeling for Faster Spatial Queries

DEFF Research Database (Denmark)

Ujang, Uznir; Antón Castro, Francesc/François; Azri, Suhaibah

2014-01-01

The advantages of three dimensional (3D) city models can be seen in various applications including photogrammetry, urban and regional planning, computer games, etc. They expand the visualization and analysis capabilities of Geographic Information Systems on cities, and they can be developed using...... method, retrieving portions of and especially searching these 3D city models, will not be done optimally. Even though current developments are based on an open data model allotted by the Open Geospatial Consortium (OGC) called CityGML, its XML-based structure makes it challenging to cluster the 3D urban...... objects. In this research, the authors propose an opponent data constellation technique of space-filling curves (3D Hilbert curves) for 3D city model data representation. Unlike previous methods, that try to project 3D or n-dimensional data down to 2D or 3D using Principal Component Analysis (PCA...

Synthesis of cefepime-d3 and cefepime-d8

International Nuclear Information System (INIS)

Kamachi, Hajime; Okita, Takaaki; Tsuno, Takashi; Naito, Takayuki

1990-01-01

Synthesis of cefepime-d 3 (6a) and cefepime-d 8 (6b) is described. Diphenylmethyl 7-benzylideneamino-3-chloromethyl-3-cephem-4-carboxylate (2) was treated with sodium iodide to afford the iodide 3, which was without isolation, allowed to react with N-methyl-d 3 -pyrrolidine to give the quaternary salt 4a. Deblocking of 4a with HCO 2 H and HCl gave 7-amino-3-(N-methyl-d3-pyrrolidinio)methyl-3-cephem-4-carboxylate hydrochloride (5a). Acylation of 5a with benzotriazol-1-yl (Z)-2-(2-aminothiazol-4-yl)-2-methoxyiminoacetate followed by treatment with dil. H 2 SO 4 afforded 6a sulfate. In the same way, 6b was synthesized using N-methyl-pyrrolidine-d 8 . (author)

Using one hybrid 3D-1D-3D approach for the conceptual design of WCCB blanket for CFETR

Energy Technology Data Exchange (ETDEWEB)

Jiang, Kecheng; Zhang, Xiaokang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Li, Jia [University of Science and Technology of China, Hefei, Anhui, 230027 (China); Ma, Xuebin [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China); Liu, Songlin, E-mail: slliu@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); University of Science and Technology of China, Hefei, Anhui, 230027 (China)

2017-01-15

Highlights: • The Hybrid 3D-1D-3D approach is used for radial building design of WCCB. • Nuclear heat obtained by this method agrees well with 3D neutronics results. • The final results of temperature and TBR satisfy with the requirements. • All the results show that this approach is high efficiency and high reliability. - Abstract: A hybrid 3D-1D-3D approach is proposed for the conceptual design of a blanket. Firstly, the neutron wall loading (NWL) of each blanket module is obtained through a neutronics calculation employing a 3D model, which contains the geometry outline of in-vacuum vessel components and the exact neutron source distribution. Secondly, a 1D cylindrical model with the blanket module containing a detailed radial building is adopted for the neutronics analysis, with the aim of calculating the tritium breeding ratio (TBR) and nuclear heating. Being normalized to the NWL, the nuclear heating is transferred to a 2D model for thermal-hydraulics analysis using the FLUENT code. Through a series analysis of nuclear-thermal iterations that considers the tritium breeding ratio (TBR) and thermal performance as optimization objectives, the optimized radial building of each module surrounding plasma can be obtained. Thirdly, the 3D structural design of each module is established by adding side walls, cover plates, stiffening plates, and other components based on the radial building. The 3D neutronics and thermal-hydraulics using the detailed blanket modules are re-analyzed. This approach has been successfully applied to the design of a water-cooled ceramic breeder blanket for the Chinese Fusion Engineering Test Reactor (CFETR). The radial building of each blanket module surrounding plasma is optimized. The global tritium breeding ratio (TBR) calculated by the 3D neutronics analysis is 1.21, and the temperature of all materials in the 3D blanket structure is below the upper limits. As indicated by the comparison of the 1D and 3D neutronics and thermal

Modelling 3D spatial objects in a geo-DBMS using a 3D primitive

Science.gov (United States)

Arens, Călin; Stoter, Jantien; van Oosterom, Peter

2005-03-01

There is a growing interest in modelling the world in three dimensions, both in applications and in science. At the same time, geographical information systems are changing into integrated architecture in which administrative and spatial data are maintained in one environment. It is for this reason that mainstream Data Base Management Systems (DBMSs) have implemented spatial data types according to the 'Simple Feature Specifications for SQL', described by the OpenGeospatial Consortium. However, these specifications are 2D, as indeed are the implementations in DBMSs. At the Section GIS Technology of TU Delft, research has been carried out in which a 3D primitive was implemented in a DBMS (Oracle Spatial). To explore the possibilities and complications, a fairly simple 3D primitive was chosen to start with: a polyhedron. In the future the study will be extended with more complex primitives, the ultimate aim being to build 3D models with features closer to the real world. Besides the data structure, a validation function was developed to check the geometric accuracy of the data. Rules for validation were established and translated into prototype implementations with the aid of literature. In order to manipulate the data, a list of useful 3D functions was specified. Most of these were translated into algorithms, which were implemented in the DBMS. The algorithms for these functions were obtained from the relevant literature. The research also comprised a comparative performance test on spatial indexing in 2D and 3D, using an R-tree. Finally, existing software was used to visualize 3D objects structured with the implemented 3D primitive. This research is a first attempt to implement a true 3D primitive in a DBMS. Future research will focus on extending and improving the implementations and on optimizing maintenance and query of 3D objects in DBMSs.

Comparison of modern 3D and 2D MR imaging sequences of the wrist at 3 Tesla

International Nuclear Information System (INIS)

Rehnitz, C.; Klaan, B.; Amarteifio, E.; Kauczor, H.U.; Weber, M.A.; Stillfried, F. von; Burkholder, I.

2016-01-01

To compare the image quality of modern 3 D and 2 D sequences for dedicated wrist imaging at 3 Tesla (T) MRI. At 3 T MRI, 18 patients (mean age: 36.2 years) with wrist pain and 16 healthy volunteers (mean age: 26.4 years) were examined using 2 D proton density-weighted fat-saturated (PDfs), isotropic 3 D TrueFISP, 3 D MEDIC, and 3 D PDfs SPACE sequences. Image quality was rated on a five-point scale (0 - 4) including overall image quality (OIQ), visibility of important structures (cartilage, ligaments, TFCC) and degree of artifacts. Signal-to-noise ratios (SNR) and contrast-to-noise ratios (CNR) of cartilage/bone/muscle/fluid as well as the mean overall SNR/CNR were calculated using region-of-interest analysis. ANOVA, paired t-, and Wilcoxon-signed-rank tests were applied. The image quality of all tested sequences was superior to 3 D PDfs SPACE (p < 0.01). 3 D TrueFISP had the highest combined cartilage score (mean: 3.4) and performed better in cartilage comparisons against 3 D PDfs SPACE in both groups and 2 D PDfs in volunteers (p < 0.05). 3 D MEDIC performed better in 7 of 8 comparisons (p < 0.05) regarding ligaments and TFCC. 2 D PDfs provided constantly high scores. The mean overall SNR/CNR for 2 D PDfs, 3 D PDfs SPACE, 3 D TrueFISP, and 3 D MEDIC were 68/65, 32/27, 45/47, and 57/45, respectively. 2 D PDfs performed best in most SNR/CNR comparisons (p < 0.05) and 3 D MEDIC performed best within the 3 D sequences (p < 0.05). Except 3 D PDfs SPACE, all tested 3 D and 2 D sequences provided high image quality. 3 D TrueFISP was best for cartilage imaging, 3 D MEDIC for ligaments and TFCC and 2 D PDfs for general wrist imaging.

Cd3(MoO4)(TeO3)2: A Polar 3D Compound Containing d10-d0 SCALP-Effect Cations.

Science.gov (United States)

Feng, Yuquan; Fan, Huitao; Zhong, Zhiguo; Wang, Hongwei; Qiu, Dongfang

2016-11-21

The new polar 3D cadmium molybdotellurite Cd 3 (MoO 4 )(TeO 3 ) 2 was obtained by means of a high-temperature solid-state method. Cd 3 (MoO 4 )(TeO 3 ) 2 is a monoclinic crystal system, and it exhibits the polar space group P2 1 (No. 4). The structure of Cd 3 (MoO 4 )(TeO 3 ) 2 can be viewed as a complicated 3D architecture that is composed of distorted CdO n (n = 6, 7) polyhedra, TeO 3 trigonal pyramids, and MoO 4 polyhedra. The compound features the first 3D NCS cadmium molybdotellurite with 1D 4- and 6-MR channels and a polar structure originating from the TeO 3 groups, MoO 4 groups, and displacements of d 10 Cd 2+ cations. The results were further confirmed by calculations of the net polarization. The UV-vis spectrum and thermal properties indicate that Cd 3 (MoO 4 )(TeO 3 ) 2 exhibits a broad transparent region and excellent thermal stability. SHG tests of Cd 3 (MoO 4 )(TeO 3 ) 2 revealed that its response is approximately the same as that of KH 2 PO 4 at the same grain size between 105 and 150 μm and that it is phase-matchable.

3D Bayesian contextual classifiers

DEFF Research Database (Denmark)

Larsen, Rasmus

2000-01-01

We extend a series of multivariate Bayesian 2-D contextual classifiers to 3-D by specifying a simultaneous Gaussian distribution for the feature vectors as well as a prior distribution of the class variables of a pixel and its 6 nearest 3-D neighbours.......We extend a series of multivariate Bayesian 2-D contextual classifiers to 3-D by specifying a simultaneous Gaussian distribution for the feature vectors as well as a prior distribution of the class variables of a pixel and its 6 nearest 3-D neighbours....

3-D discrete analytical ridgelet transform.

Science.gov (United States)

Helbert, David; Carré, Philippe; Andres, Eric

2006-12-01

In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines: 3-D discrete radial lines going through the origin defined from their orthogonal projections and 3-D planes covered with 2-D discrete line segments. These discrete analytical lines have a parameter called arithmetical thickness, allowing us to define a 3-D DART adapted to a specific application. Indeed, the 3-D DART representation is not orthogonal, It is associated with a flexible redundancy factor. The 3-D DART has a very simple forward/inverse algorithm that provides an exact reconstruction without any iterative method. In order to illustrate the potentiality of this new discrete transform, we apply the 3-D DART and its extension to the Local-DART (with smooth windowing) to the denoising of 3-D image and color video. These experimental results show that the simple thresholding of the 3-D DART coefficients is efficient.

2D-3D rigid registration to compensate for prostate motion during 3D TRUS-guided biopsy.

Science.gov (United States)

De Silva, Tharindu; Fenster, Aaron; Cool, Derek W; Gardi, Lori; Romagnoli, Cesare; Samarabandu, Jagath; Ward, Aaron D

2013-02-01

Three-dimensional (3D) transrectal ultrasound (TRUS)-guided systems have been developed to improve targeting accuracy during prostate biopsy. However, prostate motion during the procedure is a potential source of error that can cause target misalignments. The authors present an image-based registration technique to compensate for prostate motion by registering the live two-dimensional (2D) TRUS images acquired during the biopsy procedure to a preacquired 3D TRUS image. The registration must be performed both accurately and quickly in order to be useful during the clinical procedure. The authors implemented an intensity-based 2D-3D rigid registration algorithm optimizing the normalized cross-correlation (NCC) metric using Powell's method. The 2D TRUS images acquired during the procedure prior to biopsy gun firing were registered to the baseline 3D TRUS image acquired at the beginning of the procedure. The accuracy was measured by calculating the target registration error (TRE) using manually identified fiducials within the prostate; these fiducials were used for validation only and were not provided as inputs to the registration algorithm. They also evaluated the accuracy when the registrations were performed continuously throughout the biopsy by acquiring and registering live 2D TRUS images every second. This measured the improvement in accuracy resulting from performing the registration, continuously compensating for motion during the procedure. To further validate the method using a more challenging data set, registrations were performed using 3D TRUS images acquired by intentionally exerting different levels of ultrasound probe pressures in order to measure the performance of our algorithm when the prostate tissue was intentionally deformed. In this data set, biopsy scenarios were simulated by extracting 2D frames from the 3D TRUS images and registering them to the baseline 3D image. A graphics processing unit (GPU)-based implementation was used to improve the

The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints.

Science.gov (United States)

Coakley, Meghan F; Hurt, Darrell E; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C; Alekseyev, Vsevelod; Chen, David T; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S; Huyen, Yentram

2014-09-01

The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print Exchange fills this gap by providing novel, web-based tools that empower users with the ability to create ready-to-print 3D files from molecular structure data, microscopy image stacks, and computed tomography scan data. The NIH 3D Print Exchange facilitates open data sharing in a community-driven environment, and also includes various interactive features, as well as information and tutorials on 3D modeling software. As the first government-sponsored website dedicated to 3D printing, the NIH 3D Print Exchange is an important step forward to bringing 3D printing to the mainstream for scientific research and education.

Effect of viewing distance on 3D fatigue caused by viewing mobile 3D content

Science.gov (United States)

Mun, Sungchul; Lee, Dong-Su; Park, Min-Chul; Yano, Sumio

2013-05-01

With an advent of autostereoscopic display technique and increased needs for smart phones, there has been a significant growth in mobile TV markets. The rapid growth in technical, economical, and social aspects has encouraged 3D TV manufacturers to apply 3D rendering technology to mobile devices so that people have more opportunities to come into contact with many 3D content anytime and anywhere. Even if the mobile 3D technology leads to the current market growth, there is an important thing to consider for consistent development and growth in the display market. To put it briefly, human factors linked to mobile 3D viewing should be taken into consideration before developing mobile 3D technology. Many studies have investigated whether mobile 3D viewing causes undesirable biomedical effects such as motion sickness and visual fatigue, but few have examined main factors adversely affecting human health. Viewing distance is considered one of the main factors to establish optimized viewing environments from a viewer's point of view. Thus, in an effort to determine human-friendly viewing environments, this study aims to investigate the effect of viewing distance on human visual system when exposing to mobile 3D environments. Recording and analyzing brainwaves before and after watching mobile 3D content, we explore how viewing distance affects viewing experience from physiological and psychological perspectives. Results obtained in this study are expected to provide viewing guidelines for viewers, help ensure viewers against undesirable 3D effects, and lead to make gradual progress towards a human-friendly mobile 3D viewing.

From 2D Lithography to 3D Patterning

NARCIS (Netherlands)

Van Zeijl, H.W.; Wei, J.; Shen, C.; Verhaar, T.M.; Sarro, P.M.

2010-01-01

Lithography as developed for IC device fabrication is a high volume high accuracy patterning technology with strong 2 dimensional (2D) characteristics. This 2D nature makes it a challenge to integrate this technology in a 3 dimensional (3D) manufacturing environment. This article addresses the

RELAP5-3D User Problems

Energy Technology Data Exchange (ETDEWEB)

Riemke, Richard Allan

2002-09-01

The Reactor Excursion and Leak Analysis Program with 3D capability1 (RELAP5-3D) is a reactor system analysis code that has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL) for the U. S. Department of Energy (DOE). The 3D capability in RELAP5-3D includes 3D hydrodynamics2 and 3D neutron kinetics3,4. Assessment, verification, and validation of the 3D capability in RELAP5-3D is discussed in the literature5,6,7,8,9,10. Additional assessment, verification, and validation of the 3D capability of RELAP5-3D will be presented in other papers in this users seminar. As with any software, user problems occur. User problems usually fall into the categories of input processing failure, code execution failure, restart/renodalization failure, unphysical result, and installation. This presentation will discuss some of the more generic user problems that have been reported on RELAP5-3D as well as their resolution.

3D for Graphic Designers

CERN Document Server

Connell, Ellery

2011-01-01

Helping graphic designers expand their 2D skills into the 3D space The trend in graphic design is towards 3D, with the demand for motion graphics, animation, photorealism, and interactivity rapidly increasing. And with the meteoric rise of iPads, smartphones, and other interactive devices, the design landscape is changing faster than ever.2D digital artists who need a quick and efficient way to join this brave new world will want 3D for Graphic Designers. Readers get hands-on basic training in working in the 3D space, including product design, industrial design and visualization, modeling, ani

3D vector flow imaging

DEFF Research Database (Denmark)

Pihl, Michael Johannes

The main purpose of this PhD project is to develop an ultrasonic method for 3D vector flow imaging. The motivation is to advance the field of velocity estimation in ultrasound, which plays an important role in the clinic. The velocity of blood has components in all three spatial dimensions, yet...... are (vx, vy, vz) = (-0.03, 95, 1.0) ± (9, 6, 1) cm/s compared with the expected (0, 96, 0) cm/s. Afterwards, 3D vector flow images from a cross-sectional plane of the vessel are presented. The out of plane velocities exhibit the expected 2D circular-symmetric parabolic shape. The experimental results...... verify that the 3D TO method estimates the complete 3D velocity vectors, and that the method is suitable for 3D vector flow imaging....

Modelling and Analysing Access Control Policies in XACML 3.0

DEFF Research Database (Denmark)

Ramli, Carroline Dewi Puspa Kencana

(c.f. GM03,Mos05,Ris13) and manual analysis of the overall effect and consequences of a large XACML policy set is a very daunting and time-consuming task. In this thesis we address the problem of understanding the semantics of access control policy language XACML, in particular XACML version 3.0....... The main focus of this thesis is modelling and analysing access control policies in XACML 3.0. There are two main contributions in this thesis. First, we study and formalise XACML 3.0, in particular the Policy Decision Point (PDP). The concrete syntax of XACML is based on the XML format, while its standard...... semantics is described normatively using natural language. The use of English text in standardisation leads to the risk of misinterpretation and ambiguity. In order to avoid this drawback, we define an abstract syntax of XACML 3.0 and a formal XACML semantics. Second, we propose a logic-based XACML analysis...

RELAP5-3D User Problems

International Nuclear Information System (INIS)

Riemke, Richard Allan

2001-01-01

The Reactor Excursion and Leak Analysis Program with 3D capability (RELAP5-3D) is a reactor system analysis code that has been developed at the Idaho National Engineering and Environmental Laboratory (INEEL) for the U. S. Department of Energy (DOE). The 3D capability in RELAP5-3D includes 3D hydrodynamics and 3D neutron kinetics. Assessment, verification, and validation of the 3D capability in RELAP5-3D is discussed in the literature. Additional assessment, verification, and validation of the 3D capability of RELAP5-3D will be presented in other papers in this users seminar. As with any software, user problems occur. User problems usually fall into the categories of input processing failure, code execution failure, restart/renodalization failure, unphysical result, and installation. This presentation will discuss some of the more generic user problems that have been reported on RELAP5-3D as well as their resolution

Advanced 3-D Ultrasound Imaging

DEFF Research Database (Denmark)

Rasmussen, Morten Fischer

The main purpose of the PhD project was to develop methods that increase the 3-D ultrasound imaging quality available for the medical personnel in the clinic. Acquiring a 3-D volume gives the medical doctor the freedom to investigate the measured anatomy in any slice desirable after the scan has...... been completed. This allows for precise measurements of organs dimensions and makes the scan more operator independent. Real-time 3-D ultrasound imaging is still not as widespread in use in the clinics as 2-D imaging. A limiting factor has traditionally been the low image quality achievable using...... a channel limited 2-D transducer array and the conventional 3-D beamforming technique, Parallel Beamforming. The first part of the scientific contributions demonstrate that 3-D synthetic aperture imaging achieves a better image quality than the Parallel Beamforming technique. Data were obtained using both...

DELTA 3D PRINTER

Directory of Open Access Journals (Sweden)

ȘOVĂILĂ Florin

2016-07-01

Full Text Available 3D printing is a very used process in industry, the generic name being “rapid prototyping”. The essential advantage of a 3D printer is that it allows the designers to produce a prototype in a very short time, which is tested and quickly remodeled, considerably reducing the required time to get from the prototype phase to the final product. At the same time, through this technique we can achieve components with very precise forms, complex pieces that, through classical methods, could have been accomplished only in a large amount of time. In this paper, there are presented the stages of a 3D model execution, also the physical achievement after of a Delta 3D printer after the model.

3-D Discrete Analytical Ridgelet Transform

OpenAIRE

Helbert , David; Carré , Philippe; Andrès , Éric

2006-01-01

International audience; In this paper, we propose an implementation of the 3-D Ridgelet transform: the 3-D discrete analytical Ridgelet transform (3-D DART). This transform uses the Fourier strategy for the computation of the associated 3-D discrete Radon transform. The innovative step is the definition of a discrete 3-D transform with the discrete analytical geometry theory by the construction of 3-D discrete analytical lines in the Fourier domain. We propose two types of 3-D discrete lines:...

Tissue content of vitamin D₃ and 25-hydroxy vitamin D3 in minipigs after cutaneous synthesis, supplementation and deprivation of vitamin D₃

DEFF Research Database (Denmark)

Burild, Anders; Frandsen, Henrik Lauritz; Poulsen, Morten

2015-01-01

storages of vitamin D3 two studies were carried out in Göttingen minipigs. In study 1 one group of minipigs (n=2) was daily exposed to UV light corresponding to 10–20min of midday sun and another group (n=2) of pigs were fed up to 60μg vitamin D3/day corresponding to 3.7–4.4μg/kg body weight.Study 1......-hydroxy vitamin D3 in serum and skin- and subcutaneous adipose tissue biopsies were repeatedly monitored. Vitamin D3 and 25-hydroxy vitamin D3 were eliminated from the skin and the adipose tissue after UV-exposure was ceased. Supplementation of 13C-vitamin D3 did not seem to affect the decline...... demonstrated that daily UV-exposure of minipigs stimulated the cutaneous synthesis of vitamin D3 and resulted in increasing serum vitamin D3 and 25-hydroxy vitamin D3, but also carcasses containing vitamin D3 and 25-hydroxy vitamin D3. The vitamin D3 content in adipose tissue from the UV-exposed minipigs...

In situ repair of bone and cartilage defects using 3D scanning and 3D printing.

Science.gov (United States)

Li, Lan; Yu, Fei; Shi, Jianping; Shen, Sheng; Teng, Huajian; Yang, Jiquan; Wang, Xingsong; Jiang, Qing

2017-08-25

Three-dimensional (3D) printing is a rapidly emerging technology that promises to transform tissue engineering into a commercially successful biomedical industry. However, the use of robotic bioprinters alone is not sufficient for disease treatment. This study aimed to report the combined application of 3D scanning and 3D printing for treating bone and cartilage defects. Three different kinds of defect models were created to mimic three orthopedic diseases: large segmental defects of long bones, free-form fracture of femoral condyle, and International Cartilage Repair Society grade IV chondral lesion. Feasibility of in situ 3D bioprinting for these diseases was explored. The 3D digital models of samples with defects and corresponding healthy parts were obtained using high-resolution 3D scanning. The Boolean operation was used to achieve the shape of the defects, and then the target geometries were imported in a 3D bioprinter. Two kinds of photopolymerized hydrogels were synthesized as bioinks. Finally, the defects of bone and cartilage were restored perfectly in situ using 3D bioprinting. The results of this study suggested that 3D scanning and 3D bioprinting could provide another strategy for tissue engineering and regenerative medicine.

3-D magnetic field calculations for wiggglers using MAGNUS-3D

International Nuclear Information System (INIS)

Pissanetzky, S.; Tompkins, P.

1988-01-01

The recent but steady trend toward increased magnetic and geometric complexity in the design of wigglers and undulators, of which tapered wigglers, hybrid structures, laced electromagnetic wigglers, magnetic cladding, twisters and magic structures are examples, has caused a need for reliable 3-D computer models and a better understanding of the behavior of magnetic systems in three dimensions. The capabilities of the MAGNUS-3D Group of Programs are ideally suited to solve this class of problems and provide insight into 3-D effects. MAGNUS-3D can solve any problem of Magnetostatics involving permanent magnets, linear or nonlinear ferromagnetic materials and electric conductors of any shape in space. The magnetic properties of permanent magnets are described by the complete nonlinear demagnetization curve as provided by the manufacturer, or, at the user's choice, by a simpler approximation involving the coercive force, the residual induction and the direction of magnetization. The ferromagnetic materials are described by a magnetization table and an accurate interpolation relation. An internal library with properties of common industrial steels is available. The conductors are independent of the mesh and are described in terms of conductor elements from an internal library

H2020 692819 SIMPATICO - D1.1: Project Management Plan

OpenAIRE

Forner, Pamela; Gerosa, Matteo; Folograna, Antonio

2017-01-01

This document is the deliverable “D1.1 – Project Management Plan” of the European project “SIMPATICO - SIMplifying the interaction with Public Administration Through Information technology for Citizens and cOmpanies” (hereinafter also referred to as “SIMPATICO”, project reference: 692819). The SIMPATICO Project Management Plan (PMP) is the main planning document and describes how major aspects of the project are managed, monitored and controlled. It is intended to provide gu...

AxiSEM3D: broadband seismic wavefields in 3-D aspherical Earth models

Science.gov (United States)

Leng, K.; Nissen-Meyer, T.; Zad, K. H.; van Driel, M.; Al-Attar, D.

2017-12-01

Seismology is the primary tool for data-informed inference of Earth structure and dynamics. Simulating seismic wave propagation at a global scale is fundamental to seismology, but remains as one of most challenging problems in scientific computing, because of both the multiscale nature of Earth's interior and the observable frequency band of seismic data. We present a novel numerical method to simulate global seismic wave propagation in realistic 3-D Earth models. Our method, named AxiSEM3D, is a hybrid of spectral element method and pseudospectral method. It reduces the azimuthal dimension of wavefields by means of a global Fourier series parameterization, of which the number of terms can be locally adapted to the inherent azimuthal smoothness of the wavefields. AxiSEM3D allows not only for material heterogeneities, such as velocity, density, anisotropy and attenuation, but also for finite undulations on radial discontinuities, both solid-solid and solid-fluid, and thereby a variety of aspherical Earth features such as ellipticity, topography, variable crustal thickness, and core-mantle boundary topography. Such interface undulations are equivalently interpreted as material perturbations of the contiguous media, based on the "particle relabelling transformation". Efficiency comparisons show that AxiSEM3D can be 1 to 3 orders of magnitude faster than conventional 3-D methods, with the speedup increasing with simulation frequency and decreasing with model complexity, but for all realistic structures the speedup remains at least one order of magnitude. The observable frequency range of global seismic data (up to 1 Hz) has been covered for wavefield modelling upon a 3-D Earth model with reasonable computing resources. We show an application of surface wave modelling within a state-of-the-art global crustal model (Crust1.0), with the synthetics compared to real data. The high-performance C++ code is released at github.com/AxiSEM3D/AxiSEM3D.

3D PHOTOGRAPHS IN CULTURAL HERITAGE

Directory of Open Access Journals (Sweden)

W. Schuhr

2013-07-01

Full Text Available This paper on providing "oo-information" (= objective object-information on cultural monuments and sites, based on 3D photographs is also a contribution of CIPA task group 3 to the 2013 CIPA Symposium in Strasbourg. To stimulate the interest in 3D photography for scientists as well as for amateurs, 3D-Masterpieces are presented. Exemplary it is shown, due to their high documentary value ("near reality", 3D photography support, e.g. the recording, the visualization, the interpretation, the preservation and the restoration of architectural and archaeological objects. This also includes samples for excavation documentation, 3D coordinate calculation, 3D photographs applied for virtual museum purposes and as educational tools. In addition 3D photography is used for virtual museum purposes, as well as an educational tool and for spatial structure enhancement, which in particular holds for inscriptions and in rock arts. This paper is also an invitation to participate in a systematic survey on existing international archives of 3D photographs. In this respect it is also reported on first results, to define an optimum digitization rate for analog stereo views. It is more than overdue, in addition to the access to international archives for 3D photography, the available 3D photography data should appear in a global GIS(cloud-system, like on, e.g., google earth. This contribution also deals with exposing new 3D photographs to document monuments of importance for Cultural Heritage, including the use of 3D and single lense cameras from a 10m telescope staff, to be used for extremely low earth based airborne 3D photography, as well as for "underwater staff photography". In addition it is reported on the use of captive balloon and drone platforms for 3D photography in Cultural Heritage. It is liked to emphasize, the still underestimated 3D effect on real objects even allows, e.g., the spatial perception of extremely small scratches as well as of nuances in

Nuclear Regulatory legislation: 103d Congress. Volume 1, No. 3

International Nuclear Information System (INIS)

1995-08-01

This document is a compilation of nuclear regulatory legislation and other relevant material through the 103d Congress, 2d Session. This compilation has been prepared for use as a resource document, which the NRC intends to update at the end of every Congress. The contents of NUREG-0980 include the Atomic Energy Act of 1954, as amended; Energy Reorganization Act of 1974, as amended, Uranium Mill Tailings Radiation Control Act of 1978; Low-Level Radioactive Waste Policy Act; Nuclear Waste Policy Act of 1982; and NRC Authorization and Appropriations Acts. Other materials included are statutes and treaties on export licensing, nuclear non-proliferation, and environmental protection

Nuclear Regulatory legislation: 103d Congress. Volume 1, No. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

This document is a compilation of nuclear regulatory legislation and other relevant material through the 103d Congress, 2d Session. This compilation has been prepared for use as a resource document, which the NRC intends to update at the end of every Congress. The contents of NUREG-0980 include the Atomic Energy Act of 1954, as amended; Energy Reorganization Act of 1974, as amended, Uranium Mill Tailings Radiation Control Act of 1978; Low-Level Radioactive Waste Policy Act; Nuclear Waste Policy Act of 1982; and NRC Authorization and Appropriations Acts. Other materials included are statutes and treaties on export licensing, nuclear non-proliferation, and environmental protection.

Nuclear Regulatory legislation: 103d Congress. Volume 2, No. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-08-01

This document is a compilation of nuclear regulatory legislation and other relevant material through the 103d Congress, 2d Session. This compilation has been prepared for use as a resource document, which the NRC intends to update at the end of every Congress. The contents of NUREG-0980 include the Atomic Energy Act of 1954, as amended; Energy Reorganization Act of 1974, as amended, Uranium Mill Tailings Radiation Control Act of 1978; Low-Level Radioactive Waste Policy Act; Nuclear Waste Policy Act of 1982; and NRC Authorization and Appropriations Acts. Other materials included are statutes and treaties on export licensing, nuclear non-proliferation, and environmental protection.

Nuclear Regulatory legislation: 103d Congress. Volume 2, No. 3

International Nuclear Information System (INIS)

1995-08-01

This document is a compilation of nuclear regulatory legislation and other relevant material through the 103d Congress, 2d Session. This compilation has been prepared for use as a resource document, which the NRC intends to update at the end of every Congress. The contents of NUREG-0980 include the Atomic Energy Act of 1954, as amended; Energy Reorganization Act of 1974, as amended, Uranium Mill Tailings Radiation Control Act of 1978; Low-Level Radioactive Waste Policy Act; Nuclear Waste Policy Act of 1982; and NRC Authorization and Appropriations Acts. Other materials included are statutes and treaties on export licensing, nuclear non-proliferation, and environmental protection

Use of 3D reconstruction cloacagrams and 3D printing in cloacal malformations.

Science.gov (United States)

Ahn, Jennifer J; Shnorhavorian, Margarett; Amies Oelschlager, Anne-Marie E; Ripley, Beth; Shivaram, Giridhar M; Avansino, Jeffrey R; Merguerian, Paul A

2017-08-01

Cloacal anomalies are complex to manage, and the anatomy affects prognosis and management. Assessment historically includes examination under anesthesia, and genitography is often performed, but these do not consistently capture three-dimensional (3D) detail or spatial relationships of the anatomic structures. Three-dimensional reconstruction cloacagrams can provide a high level of detail including channel measurements and the level of the cloaca (3 cm), which typically determines the approach for surgical reconstruction and can impact long-term prognosis. Yet this imaging modality has not yet been directly compared with intra-operative or endoscopic findings. Our objective was to compare 3D reconstruction cloacagrams with endoscopic and intraoperative findings, as well as to describe the use of 3D printing to create models for surgical planning and education. An IRB-approved retrospective review of all cloaca patients seen by our multi-disciplinary program from 2014 to 2016 was performed. All patients underwent examination under anesthesia, endoscopy, 3D reconstruction cloacagram, and subsequent reconstructive surgery at a later date. Patient characteristics, intraoperative details, and measurements from endoscopy and cloacagram were reviewed and compared. One of the 3D cloacagrams was reformatted for 3D printing to create a model for surgical planning. Four patients were included for review, with the Figure illustrating 3D cloacagram results. Measurements of common channel length and urethral length were similar between modalities, particularly with confirming the level of cloaca. No patient experienced any complications or adverse effects from cloacagram or endoscopy. A model was successfully created from cloacagram images with the use of 3D printing technology. Accurate preoperative assessment for cloacal anomalies is important for counseling and surgical planning. Three-dimensional cloacagrams have been shown to yield a high level of anatomic detail. Here

From Field Work to Deliverables. Experiences on the Tin House Courtyard Documentation

Science.gov (United States)

Bello Caballero, L.; Mezzino, D.; Federman, A.; Santana Quintero, M.

2017-08-01

The Tin House Courtyard is a property of the National Capital Commission (NCC) in Ottawa, Canada. The site is located within the `Mile of History', a historical route running from Parliament Hill to the Governor General's residence. Currently, existing assets are under intervention works that include several preservation and renewal actions. Within the broader project, one of the tasks before construction works started was the documentation of the set of facades. The Carleton Immersive Media Studio (CIMS) at Carleton University in Ottawa was commissioned by NCC to conduct the recording of the area. This paper describes the process undertaken from field work to the final deliverable to the client, as well as the issues faced in between. Nowadays, up to date surveying technologies have revolutionized the methodologies for cultural heritage documentation. In this regard, the recording strategy employed encompassed the use of photogrammetry, laser scanner, total station, as well as different pre and post processing software in order to generate the desired outcomes.

Comparison of post-contrast 3D-T1-MPRAGE, 3D-T1-SPACE and 3D-T2-FLAIR MR images in evaluation of meningeal abnormalities at 3-T MRI.

Science.gov (United States)

Jeevanandham, Balaji; Kalyanpur, Tejas; Gupta, Prashant; Cherian, Mathew

2017-06-01

This study was to assess the usefulness of newer three-dimensional (3D)-T 1 sampling perfection with application optimized contrast using different flip-angle evolutions (SPACE) and 3D-T 2 fluid-attenuated inversion recovery (FLAIR) sequences in evaluation of meningeal abnormalities. 78 patients who presented with high suspicion of meningeal abnormalities were evaluated using post-contrast 3D-T 2 -FLAIR, 3D-T 1 magnetization-prepared rapid gradient-echo (MPRAGE) and 3D-T 1 -SPACE sequences. The images were evaluated independently by two radiologists for cortical gyral, sulcal space, basal cisterns and dural enhancement. The diagnoses were confirmed by further investigations including histopathology. Post-contrast 3D-T 1 -SPACE and 3D-T 2 -FLAIR images yielded significantly more information than MPRAGE images (p evaluation of meningeal abnormalities and when used in combination have the maximum sensitivity for leptomeningeal abnormalities. The negative-predictive value is nearly 100%, where no leptomeningeal abnormality was detected on these sequences. Advances in knowledge: Post-contrast 3D-T 1 -SPACE and 3D-T 2 -FLAIR images are more useful than 3D-T 1 -MPRAGE images in evaluation of meningeal abnormalities.

The effect of stent coating on stent deliverability: direct randomised comparison of drug eluting and bare metal stents using the same stent platform.

Science.gov (United States)

Siminiak, Tomasz; Link, Rafał; Wołoszyn, Maciej; Kałmucki, Piotr; Baszko, Artur

2012-01-01

There is certain experimental and clinical evidence indicating that the covering of bare metal stents (BMS) with drug eluting polymers to produce drug eluting stents (DES) results in increased stent stiffness and modifies the mechanical properties of the stent platform. In addition, it has been speculated that the mechanical performance of DES, compared to BMS, may be related to the type of polymer used to cover stents. We aimed at evaluating the deliverability of DES with a lactate based biodegradable polymer and BMS in patients with stable coronary artery disease in a prospective randomised study. One hundred eleven consecutive patients (age: 36-77, mean 58.8 years) scheduled for routine angioplasty due to stable coronary disease were randomised to receive BMS (Chopin II(TM), Balton, Poland) or paclitaxel eluting stent (Chopin Luc(TM), Balton, Poland) using the same metal platform. Only patients scheduled for angioplasty using the direct implantation technique of a single stent were randomised. The exclusion criteria included patients 〉 80 years, multivessel disease and reference diameter of the target vessel 〉 3.5 mm. In the BMS group (n = 55; 35 males and 20 females), the mean diameter of implanted stents was 3.09 ± 0.40 and the mean length was 11.37 ± 2.80, whereas in the DES group (n = 56; 34 males and 22 females) the mean stent sizes were 3.02 ± 0.34 and 17.90 ± 7.38 mm, respectively (p 〉 0.05 for length). The groups did not significantly differ regarding the frequency of stent implantation to particular coronary vessels. The direct stenting technique was attempted and failed, leading to the stents' implantation after predilatation in five patients in the BMS group and six patients in the DES group. Failure of stent implantation and subsequent implantation of another stent type was observed in no BMS patients and in one DES patient (NS). Although stent covering with lactate based drug eluting polymer may increase its stiffness, it does not affect

3D+time acquisitions of 3D cell culture by means of lens-free tomographic microscopy

Science.gov (United States)

Berdeu, Anthony; Laperrousaz, Bastien; Bordy, Thomas; Morales, S.; Gidrol, Xavier; Picollet-D'hahan, Nathalie; Allier, Cédric

2018-02-01

We propose a three-dimensional (3D) imaging platform based on lens-free microscopy to perform multi-angle acquisitions on 3D cell cultures embedded in extracellular matrix (ECM). We developed algorithms based on the Fourier diffraction theorem to perform fully 3D reconstructions of biological samples and we adapted the lens-free microscope to incubator conditions. Here we demonstrate for the first time, 3D+time lens-free acquisitions of 3D cell culture over 8 days directly into the incubator. The 3D reconstructed volume is as large as 5 mm3 and provides a unique way to observe in the same 3D cell culture experiment multiple cell migration strategies. Namely, in a 3D cell culture of prostate epithelial cells embedded within a Matrigel® matrix, we are able to distinguish single cell 'leaders', migration of cell clusters, migration of large aggregates of cells, and also close-gap and large-scale branching. In addition, we observe long-scale 3D deformations of the ECM that modify the geometry of the 3D cell culture. Interestingly, we also observed the opposite, i.e. we found that large aggregates of cells may deform the ECM by generating traction forces over very long distances. In sum we put forward a novel 3D lens-free microscopy tomographic technique to study the single and collective cell migrations, the cell-to-cell interactions and the cell-to-matrix interactions.

Applications of 2D to 3D conversion for educational purposes

Science.gov (United States)

Koido, Yoshihisa; Morikawa, Hiroyuki; Shiraishi, Saki; Takeuchi, Soya; Maruyama, Wataru; Nakagori, Toshio; Hirakata, Masataka; Shinkai, Hirohisa; Kawai, Takashi

2013-03-01

There are three main approaches creating stereoscopic S3D content: stereo filming using two cameras, stereo rendering of 3D computer graphics, and 2D to S3D conversion by adding binocular information to 2D material images. Although manual "off-line" conversion can control the amount of parallax flexibly, 2D material images are converted according to monocular information in most cases, and the flexibility of 2D to S3D conversion has not been exploited. If the depth is expressed flexibly, comprehensions and interests from converted S3D contents are anticipated to be differed from those from 2D. Therefore, in this study we created new S3D content for education by applying 2D to S3D conversion. For surgical education, we created S3D surgical operation content under a surgeon using a partial 2D to S3D conversion technique which was expected to concentrate viewers' attention on significant areas. And for art education, we converted Ukiyoe prints; traditional Japanese artworks made from a woodcut. The conversion of this content, which has little depth information, into S3D, is expected to produce different cognitive processes from those evoked by 2D content, e.g., the excitation of interest, and the understanding of spatial information. In addition, the effects of the representation of these contents were investigated.

Underwater 3D filming

OpenAIRE

Rinaldi, Roberto

2014-01-01

After an experimental phase of many years, 3D filming is now effective and successful. Improvements are still possible, but the film industry achieved memorable success on 3D movie’s box offices due to the overall quality of its products. Special environments such as space (“Gravity” ) and the underwater realm look perfect to be reproduced in 3D. “Filming in space” was possible in “Gravity” using special effects and computer graphic. The underwater realm is still difficult to be handled. Unde...

Relative effectiveness of oral 25-hydroxyvitamin D3 and vitamin D3 in raising wintertime serum 25-hydroxyvitamin D in older adults.

Science.gov (United States)

Cashman, Kevin D; Seamans, Kelly M; Lucey, Alice J; Stöcklin, Elisabeth; Weber, Peter; Kiely, Mairead; Hill, Tom R

2012-06-01

The relative potency of 25-hydroxyvitamin D3 to vitamin D3 needs to be better defined so that food-composition tables can better reflect the true vitamin D nutritive value of certain foods. We performed a randomized, controlled intervention study in apparently healthy, free-living adults to investigate whether the intake of 25-hydroxyvitamin D3 is 5 times more potent in raising serum 25-hydroxyvitamin D [25(OH)D] during winter compared with an equivalent amount of vitamin D3. A randomized, placebo-controlled, double-blind intervention study was conducted in adults aged ≥50 y (n = 56) who consumed a placebo, 20 μg vitamin D3, or 7 or 20 μg 25-hydroxyvitamin D3 daily throughout 10 wk of winter. Serum 25(OH)D was measured by using an enzyme-linked immunoassay, and serum albumin-corrected calcium (S-Ca) was assessed colorimetrically at the baseline, midpoint, and endpoint of the study. The mean (±SD) increases (per microgram of vitamin D compound) in serum 25(OH)D concentrations over baseline after 10 wk of supplementation were 0.96 ± 0.62, 4.02 ± 1.27, and 4.77 ± 1.04 nmol · L(-1) · μg intake(-1) for the 20-μg vitamin D3/d and 7- and 20-μg 25-hydroxyvitamin D3/d groups, respectively. A comparison of the 7- and 20-μg 25-hydroxyvitamin D3/d groups with the 20-μg vitamin D3/d group yielded conversion factors of 4.2 and 5, respectively. There was no effect of treatment on S-Ca concentrations and no incidence of hypercalcemia (S-Ca >2.6 nmol/L). Each microgram of orally consumed 25-hydroxyvitamin D3 was about 5 times more effective in raising serum 25(OH)D in older adults in winter than an equivalent amount of vitamin D3. This conversion factor could be used in food-compositional tables for relevant foods. This study was registered at clinicaltrials.gov as NCT01398202.

Abusir 3D survey 2015

Directory of Open Access Journals (Sweden)

Yukinori Kawae

2016-12-01

Full Text Available In 2015, in collaboration with the Czech Institute of Egyptology, we, a Japanese consortium, initiated the Abusir 3D Survey (A-3DS for the 3D documentation of the site’s pyramids, which have not been updated since the time of the architectural investigations of Vito Maragioglio and Celeste Rinaldi in the 1960s to the 1970s. The first season of our project focused on the exterior of Neferirkare’s pyramid, the largest pyramid at Abusir. By developing a strategic mathematical 3D survey plan, step-by-step 3D documentation to suit specific archaeological needs, and producing a new display method for the 3D data, we successfully measured the dimensions of the pyramid in a cost-effective way.

DYNA3D2000*, Explicit 3-D Hydrodynamic FEM Program

International Nuclear Information System (INIS)

Lin, J.

2002-01-01

1 - Description of program or function: DYNA3D2000 is a nonlinear explicit finite element code for analyzing 3-D structures and solid continuum. The code is vectorized and available on several computer platforms. The element library includes continuum, shell, beam, truss and spring/damper elements to allow maximum flexibility in modeling physical problems. Many materials are available to represent a wide range of material behavior, including elasticity, plasticity, composites, thermal effects and rate dependence. In addition, DYNA3D has a sophisticated contact interface capability, including frictional sliding, single surface contact and automatic contact generation. 2 - Method of solution: Discretization of a continuous model transforms partial differential equations into algebraic equations. A numerical solution is then obtained by solving these algebraic equations through a direct time marching scheme. 3 - Restrictions on the complexity of the problem: Recent software improvements have eliminated most of the user identified limitations with dynamic memory allocation and a very large format description that has pushed potential problem sizes beyond the reach of most users. The dominant restrictions remain in code execution speed and robustness, which the developers constantly strive to improve

Analysis of the 3d9ns (n = 5, 6), 3d95p, 3d94f and 3d84s4p configurations of five times ionized arsenic (As VI)

International Nuclear Information System (INIS)

Ryabtsev, A.N.; Gayasov, R.R.; Joshi, Y.N.; Van het Hof, G.J.

1993-01-01

The spectrum of arsenic was photographed in the 100-1250 A region on grazing and normal incidence spectrographs. The spectrum of As VI was extended. Seven out of eight levels of the 3d 9 5s and 6s configurations, 12 out of 12 levels of the 3d 9 5p configuration, 13 out of 20 levels of the 3d 9 4f configuration and 35 levels belonging to the 3d 9 4s4p configuration have been established. Least-Square-Fitted parametric calculations involving configuration interactions both in even and odd parity systems were carried out to adequately interpret the spectrum. One hundred and thirty-two additional lines were classified in the As VI spectrum. A new value of the ionization limit was obtained. Thus, the 3d 9 2 D 5/2 ground level in As VII lies 977500 cm -1 (121.17 eV) above the As VI ground state. (orig.)

Energy security of supply under EU climate policies

International Nuclear Information System (INIS)

Groenenberg, H.; Wetzelaer, B.J.H.W.

2006-12-01

The implications of various climate policies for the security of supply in the EU-25 were investigated. The security of supply was quantified using the Supply/Demand (S/D) Index. This index aggregates quantitative information on a country's energy system into one single figure. It takes a value between 0 and 100, with higher values indicating a more secure energy system. The S/D Index was calculated for the year 2020 based on the information in a series of policy scenarios, including a baseline (S/D Index 50.7), an energy efficiency scenario (53.8), two renewable energy scenarios (52.6 and 53.3) and two scenarios with combined policies (55.9 and 55.6).The S/D Index proved a useful indicator for assessing the implications of climate policies for the security of supply. As climate policies become more stringent, CO2 index fall, and the S/D index increases. The magnitude of the changes in the two indices is not always similar however. Major falls in CO2 indices in the order of 20% for two scenarios with combined energy efficiency and renewable energy polices lead to less noteworthy improvements in the associated S/D indices. Nevertheless, this combination of policies leads to the greatest improvements in the security of supply

Potencies of vitamin D analogs, 1α-hydroxyvitamin D3 , 1α-hydroxyvitamin D2 and 25-hydroxyvitamin D3 , in lowering cholesterol in hypercholesterolemic mice in vivo.