WorldWideScience

Sample records for poleward expansion measured

  1. Mangrove expansion and saltmarsh decline at mangrove poleward limits

    Science.gov (United States)

    Saintilan, Neil; Wilson, Nicholas C.; Rogers, Kerrylee; Rajkaran, Anusha; Krauss, Ken W.

    2014-01-01

    Mangroves are species of halophytic intertidal trees and shrubs derived from tropical genera and are likely delimited in latitudinal range by varying sensitivity to cold. There is now sufficient evidence that mangrove species have proliferated at or near their poleward limits on at least five continents over the past half century, at the expense of salt marsh. Avicennia is the most cold-tolerant genus worldwide, and is the subject of most of the observed changes. Avicennia germinans has extended in range along the US Atlantic coast and expanded into salt marsh as a consequence of lower frost frequency and intensity in the southern USA. The genus has also expanded into salt marsh at its southern limit in Peru, and on the Pacific coast of Mexico. Mangroves of several species have expanded in extent and replaced salt marsh where protected within mangrove reserves in Guangdong Province. In south-eastern Australia, the expansion of Avicennia marina into salt marshes is now well documented, and Rhizophora stylosa has extended its range southward, while showing strong population growth within estuaries along its southern limits in northern New South Wales. Avicennia marina has extended its range southwards in South Africa. The changes are consistent with the pole-ward extension of temperature thresholds co-incident with sea-level rise, although the specific mechanism of range extension might be complicated by limitations on dispersal or other factors. The shift from salt marsh to mangrove dominance on subtropical and temperate shorelines has important implications for ecological structure, function, and global change adaptation.

  2. Mangrove expansion and contraction at a poleward range limit: climate extremes and land-ocean temperature gradients.

    Science.gov (United States)

    Osland, Michael J; Day, Richard H; Hall, Courtney T; Brumfield, Marisa D; Dugas, Jason L; Jones, William R

    2017-01-01

    Within the context of climate change, there is a pressing need to better understand the ecological implications of changes in the frequency and intensity of climate extremes. Along subtropical coasts, less frequent and warmer freeze events are expected to permit freeze-sensitive mangrove forests to expand poleward and displace freeze-tolerant salt marshes. Here, our aim was to better understand the drivers of poleward mangrove migration by quantifying spatiotemporal patterns in mangrove range expansion and contraction across land-ocean temperature gradients. Our work was conducted in a freeze-sensitive mangrove-marsh transition zone that spans a land-ocean temperature gradient in one of the world's most wetland-rich regions (Mississippi River Deltaic Plain; Louisiana, USA). We used historical air temperature data (1893-2014), alternative future climate scenarios, and coastal wetland coverage data (1978-2011) to investigate spatiotemporal fluctuations and climate-wetland linkages. Our analyses indicate that changes in mangrove coverage have been controlled primarily by extreme freeze events (i.e., air temperatures below a threshold zone of -6.3 to -7.6°C). We expect that in the past 121 yr, mangrove range expansion and contraction has occurred across land-ocean temperature gradients. Mangrove resistance, resilience, and dominance were all highest in areas closer to the ocean where temperature extremes were buffered by large expanses of water and saturated soil. Under climate change, these areas will likely serve as local hotspots for mangrove dispersal, growth, range expansion, and displacement of salt marsh. Collectively, our results show that the frequency and intensity of freeze events across land-ocean temperature gradients greatly influences spatiotemporal patterns of range expansion and contraction of freeze-sensitive mangroves. We expect that, along subtropical coasts, similar processes govern the distribution and abundance of other freeze

  3. Simultaneous FPI and TMA Measurements of the Lower Thermospheric Wind in the Vicinity of the Poleward Expanding Aurora After Substorm Onset

    Science.gov (United States)

    Oyama, Shin-ichiro; Kubota, Ken; Morinaga, Takatoshi; Tsuda, Takuo T.; Kurihara, Junichi; Larsen, Miguel F.; Yamamoto, Masayuki; Cai, Lei

    2017-10-01

    Lower thermospheric wind fluctuations in the vicinity of an auroral arc immediately before and after a substorm onset were examined by analyzing data from a ground-based green line Fabry-Perot interferometer (FPI; optical wavelength of 557.7 nm) at Tromsø, Norway, and in situ measurements from a trimethyl aluminum (TMA) trail released from a sounding rocket launched during the Dynamics and Energetics of the Lower Thermosphere in Aurora 2 (DELTA-2) campaign on 26 January 2009. Soon after the rocket launch but before disappearance of the TMA trail, a substorm onset occurred. The DELTA-2 TMA experiment appears to be the first case in which the substorm onset occurred during the TMA wind measurement. It is known that energy dissipation induced by the ionospheric closure current is compacted at the poleward side of the discrete arc in the ionospheric morning cell. Both FPI and TMA measurements were made at the poleward side, but the FPI measured winds nearer to the poleward edge of the arc than the TMA by 110-130 km. The FPI winds at distance of 53-74 km relative to the arc edge showed clear fluctuations immediately after the substorm onset, but there was no obvious similar fluctuation in the TMA-measured winds. The difference in the response at the two locations suggests that energy dissipation sufficient to be detected as the FPI/TMA wind perturbations was confined to the area from the poleward edge of the arc to a relative distance shorter than 163-203 km but longer than 53-74 km in this event.

  4. Poleward intrusion in the northern Galician shelf

    Science.gov (United States)

    Alvarez, I.; Ospina-Alvarez, N.; deCastro, M.; Varela, M.; Gomez-Gesteira, M.; Prego, R.

    2010-05-01

    The evolution of a warm water mass related to the Iberian Poleward Current (IPC) was characterized along the northern Galician shelf in November 2008 by means of Sea Surface Temperature and wind data. It was observed that under upwelling favorable conditions water temperature decreased along the northern coast and a temperature break appeared between Cape Vilano and Cape Ortegal showing a relaxation of the poleward intrusion. The effect of the IPC was also analyzed inside the Northern Galician Rias taking into account the hydrographical and biogeochemical properties measured on November 18. Water driven by the IPC was observed close to the mouth of the rias, around Cape Estaca de Bares, causing a nutrient salts decrease. Inside the rias a slight biological activity was found near surface resulting from fluvial contributions.

  5. Validation of measured poleward TEC gradient using multi-station GPS with Artificial Neural Network based TEC model in low latitude region for developing predictive capability of ionospheric scintillation

    Science.gov (United States)

    Sur, D.; Paul, A.

    2017-12-01

    The equatorial ionosphere shows sharp diurnal and latitudinal Total Electron Content (TEC) variations over a major part of the day. Equatorial ionosphere also exhibits intense post-sunset ionospheric irregularities. Accurate prediction of TEC in these low latitudes is not possible from standard ionospheric models. An Artificial Neural Network (ANN) based Vertical TEC (VTEC) model has been designed using TEC data in low latitude Indian longitude sector for accurate prediction of VTEC. GPS TEC data from the stations Calcutta (22.58°N, 88.38°E geographic, magnetic dip 32°), Baharampore (24.09°N, 88.25°E geographic, magnetic dip 35°) and Siliguri (26.72°N, 88.39°E geographic; magnetic dip 40°) are used as training dataset for the duration of January 2007-September 2011. Poleward VTEC gradients from northern EIA crest to region beyond EIA crest have been calculated from measured VTEC and compared with that obtained from ANN based VTEC model. TEC data from Calcutta and Siliguri are used to compute VTEC gradients during April 2013 and August-September 2013. It has been observed that poleward VTEC gradient computed from ANN based TEC model has shown good correlation with measured values during vernal and autumnal equinoxes of high solar activity periods of 2013. Possible correlation between measured poleward TEC gradients and post-sunset scintillations (S4 ≥ 0.4) from northern crest of EIA has been observed in this paper. From the observation, a suitable threshold poleward VTEC gradient has been proposed for possible occurrence of post-sunset scintillations at northern crest of EIA along 88°E longitude. Poleward VTEC gradients obtained from ANN based VTEC model are used to forecast possible ionospheric scintillation after post-sunset period using the threshold value. It has been observed that these predicted VTEC gradients obtained from ANN based VTEC model can forecast post-sunset L-band scintillation with an accuracy of 67% to 82% in this dynamic low latitude

  6. Is Climate Change Shifting the Poleward Limit of Mangroves?

    KAUST Repository

    Hickey, Sharyn M.

    2017-02-01

    Ecological (poleward) regime shifts are a predicted response to climate change and have been well documented in terrestrial and more recently ocean species. Coastal zones are amongst the most susceptible ecosystems to the impacts of climate change, yet studies particularly focused on mangroves are lacking. Recent studies have highlighted the critical ecosystem services mangroves provide, yet there is a lack of data on temporal global population response. This study tests the notion that mangroves are migrating poleward at their biogeographical limits across the globe in line with climate change. A coupled systematic approach utilising literature and land surface and air temperature data was used to determine and validate the global poleward extent of the mangrove population. Our findings indicate that whilst temperature (land and air) have both increased across the analysed time periods, the data we located showed that mangroves were not consistently extending their latitudinal range across the globe. Mangroves, unlike other marine and terrestrial taxa, do not appear to be experiencing a poleward range expansion despite warming occurring at the present distributional limits. Understanding failure for mangroves to realise the global expansion facilitated by climate warming may require a focus on local constraints, including local anthropogenic pressures and impacts, oceanographic, hydrological, and topographical conditions.

  7. The Poleward Shift of Storm Tracks Under Climate Change: Tracking Cyclones in CMIP5

    Science.gov (United States)

    Kaspi, Y.; Tamarin, T.

    2017-12-01

    Extratropical cyclones dominate the distribution of precipitation and wind in the midlatitudes, and therefore their frequency, intensity, and paths have a significant effect on weather and climate. Comprehensive climate models forced by enhanced greenhouse gas emissions suggest that under a climate change scenario, the latitudinal band of storm tracks would shift poleward. While the poleward shift is a robust response across most models, there is currently no consensus on what is the dominant dynamical mechanism. Here we use a Lagrangian approach to study the poleward shift, by employing a storm-tracking algorithm on an ensemble of CMIP5 models forced by increased CO2 emissions. We demonstrate that in addition to a poleward shift in the latitude of storm genesis, associated with the expansion of the Hadley cell, the averaged cyclonic storm also propagates more poleward until it reaches its maximum intensity. A mechanism for enhanced poleward motion of cyclones in a warmer climate is proposed, supported by idealized global warming experiments, and relates the shift to changes in upper level jet and atmospheric water vapour content. Our results imply that under the RCP8.5 climate change scenario, the averaged latitude of peak cyclone intensity shifts poleward by about 1.2○ (1.0○) in the Atlantic (Pacific) storm track in the Northern Hemisphere (NH), and by about 1.6○ in the Southern Hemisphere (SH) storm track. These changes in cyclone tracks can have a significant impact on midlatitude climate.

  8. Role of extratropical cyclones in the recently observed increase in poleward moisture transport into the Arctic Ocean

    Science.gov (United States)

    Villamil-Otero, Gian A.; Zhang, Jing; He, Juanxiong; Zhang, Xiangdong

    2018-01-01

    Poleward atmospheric moisture transport (AMT) into the Arctic Ocean can change atmospheric moisture or water vapor content and cause cloud formation and redistribution, which may change downward longwave radiation and, in turn, surface energy budgets, air temperatures, and sea-ice production and melt. In this study, we found a consistently enhanced poleward AMT across 60°N since 1959 based on the NCAR-NCEP reanalysis. Regional analysis demonstrates that the poleward AMT predominantly occurs over the North Atlantic and North Pacific regions, contributing about 57% and 32%, respectively, to the total transport. To improve our understanding of the driving force for this enhanced poleward AMT, we explored the role that extratropical cyclone activity may play. Climatologically, about 207 extratropical cyclones move across 60°N into the Arctic Ocean each year, among which about 66 (32% of the total) and 47 (23%) originate from the North Atlantic and North Pacific Ocean, respectively. When analyzing the linear trends of the time series constructed by using a 20-year running window, we found a positive correlation of 0.70 between poleward yearly AMT and the integrated cyclone activity index (measurement of cyclone intensity, number, and duration). This shows the consistent multidecadal changes between these two parameters and may suggest cyclone activity plays a driving role in the enhanced poleward AMT. Furthermore, a composite analysis indicates that intensification and poleward extension of the Icelandic low and accompanying strengthened cyclone activity play an important role in enhancing poleward AMT over the North Atlantic region.

  9. Linear thermal expansion coefficient measurement technology in hot cell

    International Nuclear Information System (INIS)

    Park, Dae Gyu; Choo, Yong Sun; Ahn, Sang Bok; Hong, Kwon Pyo; Lee, K. S.

    1998-06-01

    To establish linear thermal expansion coefficient measurement technology in hot cell, we reviewed and evaluated various measuring technology by paper and these were compared with the data produced with pre-installed dilatometer in hot cell. Detailed contents are as follows; - The theory of test. - Review of characteristics for various measurement technology and compatibility with hot cell. - Review of standard testing regulations(ASTM). - System calibration of pre-installed dilatometer. - Performance test of pre-installed dilatometer. (author). 12 refs., 15 tabs., 8 figs

  10. Time expansion chamber and single ionization cluster measurement

    International Nuclear Information System (INIS)

    Walenta, A.H.

    1978-10-01

    The time expansion chamber (TEC), a new type of drift chamber, allows the measurement of microscopic details of ionization. The mean drift time interval from subsequent sngle ionization clusters of a relativistic particle in the TEC can be made large enough compared to the width of a anode signal to allow the recording of the clusters separately. Since single primary electrons can be detected, the cluster counting would allow an improved particle separation using the relativistic rise of primary ionization. In another application, very high position accuracy for track detectors or improved energy resolution may be obtained. Basic ionization phenomena and drift properties can be measured at the single electron level

  11. Cumulant expansions for measuring water exchange using diffusion MRI

    Science.gov (United States)

    Ning, Lipeng; Nilsson, Markus; Lasič, Samo; Westin, Carl-Fredrik; Rathi, Yogesh

    2018-02-01

    The rate of water exchange across cell membranes is a parameter of biological interest and can be measured by diffusion magnetic resonance imaging (dMRI). In this work, we investigate a stochastic model for the diffusion-and-exchange of water molecules. This model provides a general solution for the temporal evolution of dMRI signal using any type of gradient waveform, thereby generalizing the signal expressions for the Kärger model. Moreover, we also derive a general nth order cumulant expansion of the dMRI signal accounting for water exchange, which has not been explored in earlier studies. Based on this analytical expression, we compute the cumulant expansion for dMRI signals for the special case of single diffusion encoding (SDE) and double diffusion encoding (DDE) sequences. Our results provide a theoretical guideline on optimizing experimental parameters for SDE and DDE sequences, respectively. Moreover, we show that DDE signals are more sensitive to water exchange at short-time scale but provide less attenuation at long-time scale than SDE signals. Our theoretical analysis is also validated using Monte Carlo simulations on synthetic structures.

  12. Hypervelocity Heat-Transfer Measurements in an Expansion Tube

    Science.gov (United States)

    Hollis, Brian R.; Perkins, John N.

    1996-01-01

    A series of experiments has been conducted in the NASA HYPULSE Expansion Tube, in both CO2 and air test gases, in order to obtain data for comparison with computational results and to assess the capability for performing hypervelocity heat-transfer studies in this facility. Heat-transfer measurements were made in both test gases on 70 deg sphere-cone models and on hemisphere models of various radii. HYPULSE freestream flow conditions in these test gases were found to be repeatable to within 3-10%, and aerothermodynamic test times of 150 microsec in CO2 and 125 microsec in air were identified. Heat-transfer measurement uncertainty was estimated to be 10-15%. Comparisons were made with computational results from the non-equilibrium Navier-Stokes solver NEQ2D. Measured and computed heat-transfer rates agreed to within 10% on the hemispheres and on the sphere-cone forebodies, and to within 10% in CO2 and 25% in air on the afterbodies and stings of the sphere-cone models.

  13. X3 expansion tube driver gas spectroscopy and temperature measurements

    Science.gov (United States)

    Parekh, V.; Gildfind, D.; Lewis, S.; James, C.

    2017-11-01

    The University of Queensland's X3 facility is a large, free-piston driven expansion tube used for super-orbital and high Mach number scramjet aerothermodynamic studies. During recent development of new scramjet test flow conditions, experimentally measured shock speeds were found to be significantly lower than that predicted by initial driver performance calculations. These calculations were based on ideal, isentropic compression of the driver gas and indicated that loss mechanisms, not accounted for in the preliminary analysis, were significant. The critical determinant of shock speed is peak driver gas sound speed, which for a given gas composition depends on the peak driver gas temperature. This temperature may be inaccurately estimated if an incorrect fill temperature is assumed, or if heat losses during driver gas compression are significant but not accounted for. For this study, the ideal predicted peak temperature was 3750 K, without accounting for losses. However, a much lower driver temperature of 2400 K is suggested based on measured experimental shock speeds. This study aimed to measure initial and peak driver gas temperatures for a representative X3 operating condition. Examination of the transient temperatures of the driver gas and compression tube steel wall during the initial fill process showed that once the filling process was complete, the steady-state driver gas temperature closely matched the tube wall temperature. Therefore, while assuming the gas is initially at the ambient laboratory temperature is not a significant source of error, it can be entirely mitigated by simply monitoring tube wall temperature. Optical emission spectroscopy was used to determine the driver gas spectra after diaphragm rupture; the driver gas emission spectrum exhibited a significant continuum radiation component, with prominent spectral lines attributed to contamination of the gas. A graybody approximation of the continuum suggested a peak driver gas temperature of

  14. The poleward migration of the location of tropical cyclone maximum intensity.

    Science.gov (United States)

    Kossin, James P; Emanuel, Kerry A; Vecchi, Gabriel A

    2014-05-15

    Temporally inconsistent and potentially unreliable global historical data hinder the detection of trends in tropical cyclone activity. This limits our confidence in evaluating proposed linkages between observed trends in tropical cyclones and in the environment. Here we mitigate this difficulty by focusing on a metric that is comparatively insensitive to past data uncertainty, and identify a pronounced poleward migration in the average latitude at which tropical cyclones have achieved their lifetime-maximum intensity over the past 30 years. The poleward trends are evident in the global historical data in both the Northern and the Southern hemispheres, with rates of 53 and 62 kilometres per decade, respectively, and are statistically significant. When considered together, the trends in each hemisphere depict a global-average migration of tropical cyclone activity away from the tropics at a rate of about one degree of latitude per decade, which lies within the range of estimates of the observed expansion of the tropics over the same period. The global migration remains evident and statistically significant under a formal data homogenization procedure, and is unlikely to be a data artefact. The migration away from the tropics is apparently linked to marked changes in the mean meridional structure of environmental vertical wind shear and potential intensity, and can plausibly be linked to tropical expansion, which is thought to have anthropogenic contributions.

  15. Enhanced poleward propagation of storms under climate change

    Science.gov (United States)

    Tamarin-Brodsky, Talia; Kaspi, Yohai

    2017-12-01

    Earth's midlatitudes are dominated by regions of large atmospheric weather variability—often referred to as storm tracks— which influence the distribution of temperature, precipitation and wind in the extratropics. Comprehensive climate models forced by increased greenhouse gas emissions suggest that under global warming the storm tracks shift poleward. While the poleward shift is a robust response across most models, there is currently no consensus on what the underlying dynamical mechanism is. Here we present a new perspective on the poleward shift, which is based on a Lagrangian view of the storm tracks. We show that in addition to a poleward shift in the genesis latitude of the storms, associated with the shift in baroclinicity, the latitudinal displacement of cyclonic storms increases under global warming. This is achieved by applying a storm-tracking algorithm to an ensemble of CMIP5 models. The increased latitudinal propagation in a warmer climate is shown to be a result of stronger upper-level winds and increased atmospheric water vapour. These changes in the propagation characteristics of the storms can have a significant impact on midlatitude climate.

  16. Is the poleward migration of tropical cyclone maximum intensity associated with a poleward migration of tropical cyclone genesis?

    Science.gov (United States)

    Daloz, Anne Sophie; Camargo, Suzana J.

    2018-01-01

    A recent study showed that the global average latitude where tropical cyclones achieve their lifetime-maximum intensity has been migrating poleward at a rate of about one-half degree of latitude per decade over the last 30 years in each hemisphere. However, it does not answer a critical question: is the poleward migration of tropical cyclone lifetime-maximum intensity associated with a poleward migration of tropical cyclone genesis? In this study we will examine this question. First we analyze changes in the environmental variables associated with tropical cyclone genesis, namely entropy deficit, potential intensity, vertical wind shear, vorticity, skin temperature and specific humidity at 500 hPa in reanalysis datasets between 1980 and 2013. Then, a selection of these variables is combined into two tropical cyclone genesis indices that empirically relate tropical cyclone genesis to large-scale variables. We find a shift toward greater (smaller) average potential number of genesis at higher (lower) latitudes over most regions of the Pacific Ocean, which is consistent with a migration of tropical cyclone genesis towards higher latitudes. We then examine the global best track archive and find coherent and significant poleward shifts in mean genesis position over the Pacific Ocean basins.

  17. Using a Michelson Interferometer to Measure Coefficient of Thermal Expansion of Copper

    Science.gov (United States)

    Scholl, Ryan; Liby, Bruce W.

    2009-01-01

    When most materials are heated they expand. This concept is usually demonstrated using some type of mechanical measurement of the linear expansion of a metal rod. We have developed an alternative laboratory method for measuring thermal expansion by using a Michelson interferometer. Using the method presented, interference, interferometry, and the…

  18. Measurement of Linear Coefficient of Thermal Expansion and Temperature-Dependent Refractive Index Using Interferometric System

    Science.gov (United States)

    Corsetti, James A.; Green, William E.; Ellis, Jonathan D.; Schmidt, Greg R.; Moore, Duncan T.

    2017-01-01

    A system combining an interferometer with an environmental chamber for measuring both coefficient of thermal expansion (CTE) and temperature-dependent refractive index (dn/dT) simultaneously is presented. The operation and measurement results of this instrument are discussed.

  19. Negative Thermal Expansion Coefficient of Graphene Measured by Raman Spectroscopy

    OpenAIRE

    Yoon, Duhee; Son, Young-Woo; Cheong, Heonsik

    2011-01-01

    The thermal expansion coefficient (TEC) of single-layer graphene is estimated with temperature-dependent Raman spectroscopy in the temperature range between 200 and 400 K. It is found to be strongly dependent on temperature but remains negative in the whole temperature range, with a room temperature value of -8.0x10^{-6} K^{-1}. The strain caused by the TEC mismatch between graphene and the substrate plays a crucial role in determining the physical properties of graphene, and hence its effect...

  20. Negative thermal expansion coefficient of graphene measured by Raman spectroscopy.

    Science.gov (United States)

    Yoon, Duhee; Son, Young-Woo; Cheong, Hyeonsik

    2011-08-10

    The thermal expansion coefficient (TEC) of single-layer graphene is estimated with temperature-dependent Raman spectroscopy in the temperature range between 200 and 400 K. It is found to be strongly dependent on temperature but remains negative in the whole temperature range with a room temperature value of (-8.0 ± 0.7) × 10(-6) K(-1). The strain caused by the TEC mismatch between graphene and the substrate plays a crucial role in determining the physical properties of graphene, and hence its effect must be accounted for in the interpretation of experimental data taken at cryogenic or elevated temperatures.

  1. Nanoscale Electromechanics To Measure Thermal Conductivity, Expansion, and Interfacial Losses.

    Science.gov (United States)

    Mathew, John P; Patel, Raj; Borah, Abhinandan; Maliakkal, Carina B; Abhilash, T S; Deshmukh, Mandar M

    2015-11-11

    We study the effect of localized Joule heating on the mechanical properties of doubly clamped nanowires under tensile stress. Local heating results in systematic variation of the resonant frequency; these frequency changes result from thermal stresses that depend on temperature dependent thermal conductivity and expansion coefficient. The change in sign of the linear expansion coefficient of InAs is reflected in the resonant response of the system near a bath temperature of 20 K. Using finite element simulations to model the experimentally observed frequency shifts, we show that the thermal conductivity of a nanowire can be approximated in the 10-60 K temperature range by the empirical form κ = bT W/mK, where the value of b for a nanowire was found to be b = 0.035 W/mK(2), significantly lower than bulk values. Also, local heating allows us to independently vary the temperature of the nanowire relative to the clamping points pinned to the bath temperature. We suggest a loss mechanism (dissipation ~10(-4)-10(-5)) originating from the interfacial clamping losses between the metal and the semiconductor nanostructure.

  2. Diamond Thermal Expansion Measurement Using Transmitted X-ray Back-diffraction.

    OpenAIRE

    Giles, Carlos; Adriano, Cris; Lubambo, Adriana Freire; Cusatis, Cesar; Mazzaro, Irineu; Hönnicke, Marcelo Goncalves

    2015-01-01

    The linear thermal expansion coefficient of diamond has been measured using forward-diffracted profiles in X-ray backscattering. This experimental technique is presented as an alternative way of measuring thermal expansion coefficients of solids in the high-resolution Bragg backscattering geometry without the intrinsic difficulty of detecting the reflected beam. The temperature dependence of the lattice parameter is obtained from the high sensitivity of the transmitted profiles to the Bragg a...

  3. Selected Issues of the Indicating Measurements in a Spark Ignition Engine with an Additional Expansion Process

    Directory of Open Access Journals (Sweden)

    Marcin Noga

    2017-03-01

    Full Text Available The paper presents the results of research on the turbocharged spark ignition engine with additional exhaust expansion in a separate cylinder, which is commonly known as the five-stroke engine. The research engine has been constructed based on the four cylinder engine in which two outer cylinders work as the fired cylinders, while two internally connected inner cylinders constitute the volume of the additional expansion process. The engine represents a powertrain realizing an ultra-expansion cycle. The purpose of the study was to find an effective additional expansion process in the five-stroke engine. Cylinder-pressure indicating measurements were carried out for one of the fired cylinders and the additional expansion cylinder. The study was performed for over 20 different points on the engine operation map. This allowed us to determine a dependence between the pressure indicated in the fired cylinders and in the additional expansion cylinders. A function of the mean pressure indicated in the additional expansion cylinder versus a brake mean effective pressure was also presented. This showed a load threshold from which the work of the cylinders of additional expansion produced benefits for the output of the experimental engine. The issues of mechanical efficiency and effective efficiency of this engine were also discussed.

  4. Low-temperature thermal expansion measurements in PrV2Al20

    International Nuclear Information System (INIS)

    Magata, A.; Matsumoto, Y.; Tsujimoto, M.; Tomita, T.; Sakai, A.; Nakatsuji, S.; Kiichler, R.

    2016-01-01

    We have measured thermal expansion of PrV 2 Al 20 and LaV 2 Al 20 from room temperature down to 2 K, using a capacitance dilatometer. Linear thermal expansion ΔL/L along [111] direction decreases monotonically on cooling in both materials. The extracted 4ƒ electrons contribution of the linear thermal expansion coefficient a clearly shows a broad peak at ∼ 30 K which may correspond to the crystal electric field excited state at 40 K suggested in the previous specific heat study. (paper)

  5. Thermal expansion measurements on boron carbide and europium sesquioxide by laser interferometry

    International Nuclear Information System (INIS)

    Preston, S.D.

    1980-01-01

    A laser interferometer technique for measuring the absolute linear thermal expansion of small annular specimens is described. Results are presented for unirradiated boron carbide (B 4 C) and europia (Eu 2 O 3 ) up to 1000 0 C. Both compounds are neutron-absorbing materials of potential use in fast-reactor control rods and data on their thermophysical properties, in particular linear thermal expansion, are essential to the control rod designers. (author)

  6. Measuring Cosmic Expansion and Large Scale Structure with Destiny

    Science.gov (United States)

    Benford, Dominic J.; Lauer, Tod R.

    2007-01-01

    Destiny is a simple, direct, low cost mission to determine the properties of dark energy by obtaining a cosmologically deep supernova (SN) type Ia Hubble diagram and by measuring the large-scale mass power spectrum over time. Its science instrument is a 1.65m space telescope, featuring a near-infrared survey camera/spectrometer with a large field of view. During its first two years, Destiny will detect, observe, and characterize 23000 SN Ia events over the redshift interval 0.4Destiny will be used in its third year as a high resolution, wide-field imager to conduct a weak lensing survey covering >lo00 square degrees to measure the large-scale mass power spectrum. The combination of surveys is much more powerful than either technique on its own, and will have over an order of magnitude greater sensitivity than will be provided by ongoing ground-based projects.

  7. Resonant holographic measurements of laser ablation plume expansion in vacuum and argon gas backgrounds

    Energy Technology Data Exchange (ETDEWEB)

    Lindley, Roger Alan [Michigan Univ., Ann Arbor, MI (United States)

    1993-01-01

    This thesis discusses the following on resonant holographic measurements of laser ablation plume expansion: Introduction to laser ablation; applications of laser ablation; The study of plume expansion; holographic interferometry; resonant holographic interferometry; accounting for finite laser bandwidth; The solution for doppler broadening and finite bandwidth; the main optical table; the lumonics laser spot shape; developing and reconstructing the holograms; plume expansion in RF/Plasma Environments; Determining λ°; resonant refraction effects; fringe shift interpretation; shot-to-shot consistency; laser ablation in vacuum and low pressure, inert, background gas; theoretically modeling plume expansion in vacuum and low pressure, inert, background gas; and laser ablation in higher pressure, inert, background gas.

  8. Measurements on thermal expansion with strain gauge; yugami geji wo mochiita gokuteion netsubochoritsu no keisoku

    Energy Technology Data Exchange (ETDEWEB)

    Numazawa, T.; Sato, A. [National Research Inst. for Metals, Tokyo (Japan); Arai, O.; Okuda, Y. [Tokyo Inst. of Tech., Tokyo (Japan)

    1999-11-10

    As the part of very low temperature thermophysical property measurement technique standardization by the intelligent basis promotion system, very low temperature coefficient of thermal expansion measurement method using the strain gauge was examined. Here, DyVO4 that that it has the unique temperature dependency as a sample for the test at 20K or less was expected was taken up. The strain gauge, which constituted bridge circuit using strain sensor of 4 used by fatigue test of very low temperature, was produced, and the measurement of coefficient of thermal expansion was tried. (NEDO)

  9. Computing derivative-based global sensitivity measures using polynomial chaos expansions

    International Nuclear Information System (INIS)

    Sudret, B.; Mai, C.V.

    2015-01-01

    In the field of computer experiments sensitivity analysis aims at quantifying the relative importance of each input parameter (or combinations thereof) of a computational model with respect to the model output uncertainty. Variance decomposition methods leading to the well-known Sobol' indices are recognized as accurate techniques, at a rather high computational cost though. The use of polynomial chaos expansions (PCE) to compute Sobol' indices has allowed to alleviate the computational burden though. However, when dealing with large dimensional input vectors, it is good practice to first use screening methods in order to discard unimportant variables. The derivative-based global sensitivity measures (DGSMs) have been developed recently in this respect. In this paper we show how polynomial chaos expansions may be used to compute analytically DGSMs as a mere post-processing. This requires the analytical derivation of derivatives of the orthonormal polynomials which enter PC expansions. Closed-form expressions for Hermite, Legendre and Laguerre polynomial expansions are given. The efficiency of the approach is illustrated on two well-known benchmark problems in sensitivity analysis. - Highlights: • Derivative-based global sensitivity measures (DGSM) have been developed for screening purpose. • Polynomial chaos expansions (PC) are used as a surrogate model of the original computational model. • From a PC expansion the DGSM can be computed analytically. • The paper provides the derivatives of Hermite, Legendre and Laguerre polynomials for this purpose

  10. Poleward upgliding Siberian atmospheric rivers over sea ice heat up Arctic upper air.

    Science.gov (United States)

    Komatsu, Kensuke K; Alexeev, Vladimir A; Repina, Irina A; Tachibana, Yoshihiro

    2018-02-13

    We carried out upper air measurements with radiosondes during the summer over the Arctic Ocean from an icebreaker moving poleward from an ice-free region, through the ice edge, and into a region of thick ice. Rapid warming of the Arctic is a significant environmental issue that occurs not only at the surface but also throughout the troposphere. In addition to the widely accepted mechanisms responsible for the increase of tropospheric warming during the summer over the Arctic, we showed a new potential contributing process to the increase, based on our direct observations and supporting numerical simulations and statistical analyses using a long-term reanalysis dataset. We refer to this new process as "Siberian Atmospheric Rivers (SARs)". Poleward upglides of SARs over cold air domes overlying sea ice provide the upper atmosphere with extra heat via condensation of water vapour. This heating drives increased buoyancy and further strengthens the ascent and heating of the mid-troposphere. This process requires the combination of SARs and sea ice as a land-ocean-atmosphere system, the implication being that large-scale heat and moisture transport from the lower latitudes can remotely amplify the warming of the Arctic troposphere in the summer.

  11. Thermal expansion measurements of cryoprotective agents. Part I: a new experimental apparatus.

    Science.gov (United States)

    Rabin, Yoed; Bell, Ernest

    2003-06-01

    As part of an ongoing effort to characterize the mechanical behavior of biological tissues in the cryogenic temperature range, the current study focuses on the thermal expansion measurements of cryoprotective agents. This study focuses on the upper part of the cryogenic temperature range, where the cryoprotectant behaves like low viscous liquid at all practical cooling rates. For the purpose of this study, a new apparatus for thermal expansion measurements has been designed and constructed. Part I of this study (the current report) includes: a description of the new experimental apparatus, the techniques of operation, calibration, system validation, and a detailed uncertainty analysis. Part II of this study (the report following) includes thermal expansion measurements of the cryoprotectant mixtures DP6 and VS55, and comparison with data from the literature on DMSO solutions.

  12. Crop pests and pathogens move polewards in a warming world

    Science.gov (United States)

    Bebber, Daniel P.; Ramotowski, Mark A. T.; Gurr, Sarah J.

    2013-11-01

    Global food security is threatened by the emergence and spread of crop pests and pathogens. Spread is facilitated primarily by human transportation, but there is increasing concern that climate change allows establishment in hitherto unsuitable regions. However, interactions between climate change, crops and pests are complex, and the extent to which crop pests and pathogens have altered their latitudinal ranges in response to global warming is largely unknown. Here, we demonstrate an average poleward shift of 2.7+/-0.8kmyr-1 since 1960, in observations of hundreds of pests and pathogens, but with significant variation in trends among taxonomic groups. Observational bias, where developed countries at high latitudes detect pests earlier than developing countries at low latitudes, would result in an apparent shift towards the Equator. The observed positive latitudinal trends in many taxa support the hypothesis of global warming-driven pest movement.

  13. Thermal expansion coefficient measurement from electron diffraction of amorphous films in a TEM.

    Science.gov (United States)

    Hayashida, Misa; Cui, Kai; Malac, Marek; Egerton, Ray

    2018-05-01

    We measured the linear thermal expansion coefficients of amorphous 5-30 nm thick SiN and 17 nm thick Formvar/Carbon (F/C) films using electron diffraction in a transmission electron microscope. Positive thermal expansion coefficient (TEC) was observed in SiN but negative coefficients in the F/C films. In case of amorphous carbon (aC) films, we could not measure TEC because the diffraction radii required several hours to stabilize at a fixed temperature. Crown Copyright © 2018. Published by Elsevier B.V. All rights reserved.

  14. Application of double modulation for measurement of the thermal expansion coefficient of liquid metals

    International Nuclear Information System (INIS)

    Blagonravov, L A; Karchevskiy, O O; Ivannikov, P V; Soboleva, A V

    2008-01-01

    The first results of the thermal expansion coefficient measurement obtained for liquid conductors using a new modulation method are presented. The method is based on a superposition of two periodical influences on a liquid metal. The thermal expansion coefficient α P is determined by means of measuring the amplitudes of oscillations of electric current power w ∼ and pressure p ∼ . In the present work the K-Na alloy of the eutectic composition was used as a sample. Distinction of the experimental data obtained by authors from the literature data is 30 to 40%. Such a difference is in the range of error of determination of α P from the density data of K-Na alloy. The method allows direct determination of the thermal expansion coefficient of liquid conductors in absolute units

  15. Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method.

    Science.gov (United States)

    Wang, Wei; Liu, Huiming; Huang, Rongjin; Zhao, Yuqiang; Huang, Chuangjun; Guo, Shibin; Shan, Yi; Li, Laifeng

    2018-01-01

    Thermal expansion and magnetostriction, the strain responses of a material to temperature and a magnetic field, especially properties at low temperature, are extremely useful to study electronic and phononic properties, phase transitions, quantum criticality, and other interesting phenomena in cryogenic engineering and materials science. However, traditional dilatometers cannot provide magnetic field and ultra-low temperature (thermal expansion and magnetostriction at cryogenic temperature using the strain gauge method based on a Physical Properties Measurements System (PPMS). The interfacing software and automation were developed using LabVIEW. The sample temperature range can be tuned continuously between 1.8 and 400 K. With this PPMS-aided measuring system, we can observe temperature and magnetic field dependence of the linear thermal expansion of different solid materials easily and accurately.

  16. Thermal Expansion and Magnetostriction Measurements at Cryogenic Temperature Using the Strain Gauge Method

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2018-03-01

    Full Text Available Thermal expansion and magnetostriction, the strain responses of a material to temperature and a magnetic field, especially properties at low temperature, are extremely useful to study electronic and phononic properties, phase transitions, quantum criticality, and other interesting phenomena in cryogenic engineering and materials science. However, traditional dilatometers cannot provide magnetic field and ultra-low temperature (<77 K environment easily. This paper describes the design and test results of thermal expansion and magnetostriction at cryogenic temperature using the strain gauge method based on a Physical Properties Measurements System (PPMS. The interfacing software and automation were developed using LabVIEW. The sample temperature range can be tuned continuously between 1.8 and 400 K. With this PPMS-aided measuring system, we can observe temperature and magnetic field dependence of the linear thermal expansion of different solid materials easily and accurately.

  17. Linear thermal expansion measurements on silicon from 6 to 340 K

    International Nuclear Information System (INIS)

    Lyon, K.G.; Salinger, G.L.; Swenson, C.A.; White, G.K.

    1977-01-01

    Linear thermal expansion measurements have been carried out from 6 to 340 K on a high-purity silicon sample using a linear absolute capacitance dilatometer. The accuracy of the measurements varies from +- 0.01 x 10 -8 K -1 at the lowest temperatures to +- 0.1 x 10 -8 K -1 or 0.1%, whichever is greater, near room temperature, and is sufficient to establish silicon as a thermal expansion standard for these temperatures. The agreement with previous data is satisfactory at low temperatures and excellent above room temperature where laser-interferometry data of comparable accuracy exist. Thermal expansions calculated from ultrasonic and heat-capacity data are preferred below 13 K where experimental problems occurred

  18. Next generation dilatometer for highest accuracy thermal expansion measurement of ZERODUR®

    Science.gov (United States)

    Jedamzik, Ralf; Engel, Axel; Kunisch, Clemens; Westenberger, Gerhard; Fischer, Peter; Westerhoff, Thomas

    2015-09-01

    In the recent years, the ever tighter tolerance for the Coefficient of thermal expansion (CTE) of IC Lithography component materials is requesting significant progress in the metrology accuracy to determine this property as requested. ZERODUR® is known for its extremely low CTE between 0°C to 50°C. The current measurement of the thermal expansion coefficient is done using push rod dilatometer measurement systems developed at SCHOTT. In recent years measurements have been published showing the excellent CTE homogeneity of ZERODUR® in the one-digit ppb/K range using these systems. The verifiable homogeneity was limited by the CTE(0°C, 50°C) measurement repeatability in the range of ± 1.2 ppb/K of the current improved push rod dilatometer setup using an optical interferometer as detector instead of an inductive coil. With ZERODUR® TAILORED, SCHOTT introduced a low thermal expansion material grade that can be adapted to individual customer application temperature profiles. The basis for this product is a model that has been developed in 2010 for better understanding of the thermal expansion behavior under given temperature versus time conditions. The CTE behavior predicted by the model has proven to be in very good alignment with the data determined in the thermal expansions measurements. The measurements to determine the data feeding the model require a dilatometer setup with excellent stability and accuracy for long measurement times of several days. In the past few years SCHOTT spent a lot of effort to drive a dilatometer measurement technology based on the push rod setup to its limit, to fulfill the continuously demand for higher CTE accuracy and deeper material knowledge of ZERODUR®. This paper reports on the status of the dilatometer technology development at SCHOTT.

  19. Three-Dimensional Force Measurements During Rapid Palatal Expansion in Sus scrofa

    Directory of Open Access Journals (Sweden)

    Kelly Goeckner

    2016-04-01

    Full Text Available Rapid palatal expansion is an orthodontic procedure widely used to correct the maxillary arch. However, its outcome is significantly influenced by factors that show a high degree of variability amongst patients. The traditional treatment methodology is based on an intuitive and heuristic treatment approach because the forces applied in the three dimensions are indeterminate. To enable optimal and individualized treatment, it is essential to measure the three-dimensional (3D forces and displacements created by the expander. This paper proposes a method for performing these 3D measurements using a single embedded strain sensor, combining experimental measurements of strain in the palatal expander with 3D finite element analysis (FEA. The method is demonstrated using the maxillary jaw from a freshly euthanized pig (Sus scrofa and a hyrax-design rapid palatal expander (RPE appliance with integrated strain gage. The strain gage measurements are recorded using a computer interface, following which the expansion forces and extent of expansion are estimated by FEA. A total activation of 2.0 mm results in peak total force of about 100 N—almost entirely along the direction of expansion. The results also indicate that more than 85% of the input activation is immediately transferred to the palate and/or teeth. These studies demonstrate a method for assessing and individualizing expansion magnitudes and forces during orthopedic expansion of the maxilla. This provides the basis for further development of smart orthodontic appliances that provide real-time readouts of forces and movements, which will allow personalized, optimal treatment.

  20. Thermal expansivities of peptides, polypeptides and proteins as measured by pressure perturbation calorimetry.

    Science.gov (United States)

    Pandharipande, Pranav P; Makhatadze, George I

    2015-04-01

    The main goal of this work was to provide direct experimental evidence that the expansivity of peptides, polypeptides and proteins as measured by pressure perturbation calorimetry (PPC), can serve as a proxy to characterize relative compactness of proteins, especially the denatured state ensemble. This is very important as currently only small angle X-ray scattering (SAXS), intrinsic viscosity and, to a lesser degree, fluorescence resonance transfer (FRET) experiments are capable of reporting on the compactness of denatured state ensembles. We combined the expansivity measurements with other biophysical methods (far-UV circular dichroism spectroscopy, differential scanning calorimetry, and small angle X-ray scattering). Three case studies of the effects of conformational changes on the expansivity of polypeptides in solution are presented. We have shown that expansivity appears to be insensitive to the helix-coil transition, and appears to reflect the changes in hydration of the side-chains. We also observed that the expansivity is sensitive to the global conformation of the polypeptide chain and thus can be potentially used to probe hydration of different collapsed states of denatured or even intrinsically disordered proteins. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Flow characteristics in an expansion tunnel as inferred from velocity measurements

    Science.gov (United States)

    Miller, C. G.; Friesen, W. J.

    1977-01-01

    A photoionization technique was used to study flow characteristics in an expansion tunnel. Vertical surveys of the axial component of flow velocity just downstream from the nozzle exit were obtained, and estimates of freestream density were inferred from the velocity measurement technique. The pitot pressure was measured and compared to the average axial component of velocity as a function of time for the two cases when air and CO2 were used as test gases. Vertical velocity and static density profiles at the nozzle exit are presented for the case when CO2 was used as test gas. Experimental results were used to determine the diameter and uniformity of the test core at the nozzle exit and the duration of the quasi-steady flow period. These data are relevant to evaluation of the suitability of operating an expansion tube as an expansion tunnel. The expansion tunnel is an expansion tube with a conical nozzle positioned at the exit of the acceleration section, so that nozzle entrance flow conditions are hypersonic and characterized by hypervelocity.

  2. Sensor for Measuring Hydrogen Partial Pressure in Parabolic Trough Power Plant Expansion Tanks

    Energy Technology Data Exchange (ETDEWEB)

    Glatzmaier, Greg C.; Cooney, Daniel A.

    2017-06-27

    The National Renewable Energy Laboratory and Acciona Energy North America are working together to design and implement a process system that provides a permanent solution to the issue of hydrogen buildup at parabolic trough power plants. We are pursuing a method that selectively removes hydrogen from the expansion tanks that serve as reservoirs for the heat transfer fluid (HTF) that circulates in the collector field and power block components. Our modeling shows that removing hydrogen from the expansion tanks at a design rate reduces and maintains dissolved hydrogen in the circulating HTF to a selected target level. Our collaborative work consists of several tasks that are needed to advance this process concept to a development stage, where it is ready for implementation at a commercial power plant. Our main effort is to design and evaluate likely process-unit operations that remove hydrogen from the expansion tanks at a specified rate. Additionally, we designed and demonstrated a method and instrumentation to measure hydrogen partial pressure and concentration in the expansion-tank headspace gas. We measured hydrogen partial pressure in the headspace gas mixture using a palladium-alloy membrane, which is permeable exclusively to hydrogen. The membrane establishes a pure hydrogen gas phase that is in equilibrium with the hydrogen in the gas mixture. We designed and fabricated instrumentation, and demonstrated its effectiveness in measuring hydrogen partial pressures over a range of three orders of magnitude. Our goal is to install this instrument at the Nevada Solar One power plant and to demonstrate its effectiveness in measuring hydrogen levels in the expansion tanks under normal plant operating conditions.

  3. Trilogy, a planetary geodesy mission concept for measuring the expansion of the solar system

    Science.gov (United States)

    Smith, David E.; Zuber, Maria T.; Mazarico, Erwan; Genova, Antonio; Neumann, Gregory A.; Sun, Xiaoli; Torrence, Mark H.; Mao, Dan-dan

    2018-04-01

    The scale of the solar system is slowly changing, likely increasing as a result of solar mass loss, with additional change possible if there is a secular variation of the gravitational constant, G. The measurement of the change of scale could provide insight into the past and the future of the solar system, and in addition a better understanding of planetary motion and fundamental physics. Estimates for the expansion of the scale of the solar system are of order 1.5 cm year-1 AU-1, which over several years is an observable quantity with present-day laser ranging systems. This estimate suggests that laser measurements between planets could provide an accurate estimate of the solar system expansion rate. We examine distance measurements between three bodies in the inner solar system - Earth's Moon, Mars and Venus - and outline a mission concept for making the measurements. The concept involves placing spacecraft that carry laser ranging transponders in orbit around each body and measuring the distances between the three spacecraft over a period of several years. The analysis of these range measurements would allow the co-estimation of the spacecraft orbit, planetary ephemerides, other geophysical parameters related to the constitution and dynamics of the central bodies, and key geodetic parameters related to the solar system expansion, the Sun, and theoretical physics.

  4. Thermal expansion measurements by x-ray scattering and breakdown of Ehrenfest's relation in alloy liquids

    International Nuclear Information System (INIS)

    Gangopadhyay, A. K.; Blodgett, M. E.; Johnson, M. L.; Vogt, A. J.; Mauro, N. A.; Kelton, K. F.

    2014-01-01

    Measurements of sharp diffraction peaks as a function of temperature are routinely used to obtain precise linear expansion coefficients of crystalline solids. In this case, the relation between temperature dependent changes in peak position in momentum transfer (q 1 ) and volume expansion is straightforward (Ehrenfest's relation: q 1  = K(2π/d), where K is a constant and d is the interatomic spacing) and the data obtained are usually in close agreement with more direct measurements. With high intensity synchrotron x-ray and spallation neutron sources, it is also possible to accurately measure the positions of the much broader peaks for liquids and glasses. This has led to a debate on whether linear expansion coefficients derived from these data are an accurate representation of the volume expansion coefficients. We present here volume thermal expansion and x-ray diffraction data for a large number of glass-forming alloy liquids acquired in a containerless environment using the beamline electrostatic levitation technique. The data show a large difference in the values obtained from the two different techniques. Moreover, the position of the first peak (q 1 ) in the scattered intensity in the structure factor (S(q)) and the atomic volume v for all liquids follow a simple relationship, v∝(q 1 ) −ε . The exponent, ε = 2.28 (±0.11), is much different from the expected value of 3 from Ehrenfest's relation and shows no temperature dependence over the temperature range of the data collected

  5. Nutrient-driven poleward expansion of the Northeast Atlantic mackerel (Scomber scombrus stock: A new hypothesis

    Directory of Open Access Journals (Sweden)

    Selma V. Pacariz

    2016-05-01

    Full Text Available Abstract The Northeast Atlantic mackerel (Scomber scombrus stock has increased and expanded its summer feeding migration west- and northwards since 2006, entailing large geopolitical challenges for the countries harvesting this species. A common perspective is that climatic warming opens up new regions for biota in the north. It has also been suggested that the presently large pelagic fish stocks deplete prey resources in the eastern North Atlantic during their summer feeding phase, forcing the stocks west towards the Irminger Sea in their search for food. Here, we suggest that the declining nutrient (silicate concentrations observed along the northern European continental slope reduce primary and thus secondary production, exacerbating food scarceness in the east and adding to the incentive to migrate westward. The new westward feeding route requires that the fish cross the Iceland Basin, which during the summer season quickly becomes nutrient-depleted and thus might act as a barrier to migration after the spring bloom. Using mackerel and zooplankton abundance data from the International Ecosystem Summer Surveys in the Nordic Seas, we suggest that the oligotrophic waters in the central Iceland Basin force the fish to migrate through a narrow ‘corridor’ along the south Iceland shelf, where nutrients are replenished and both primary and secondary production are higher.

  6. Ocean acidification limits temperature-induced poleward expansion of coral habitats around Japan

    Directory of Open Access Journals (Sweden)

    Y. Yara

    2012-12-01

    Full Text Available Using results from four coupled global carbon cycle-climate models combined with in situ observations, we estimate the effects of future global warming and ocean acidification on potential habitats for tropical/subtropical and temperate coral communities in the seas around Japan. The suitability of coral habitats is classified on the basis of the currently observed regional ranges for temperature and saturation states with regard to aragonite (Ωarag. We find that, under the "business as usual" SRES A2 scenario, coral habitats are projected to expand northward by several hundred kilometers by the end of this century. At the same time, coral habitats are projected to become sandwiched between regions where the frequency of coral bleaching will increase, and regions where Ωarag will become too low to support sufficiently high calcification rates. As a result, the habitat suitable for tropical/subtropical corals around Japan may be reduced by half by the 2020s to 2030s, and is projected to disappear by the 2030s to 2040s. The habitat suitable for the temperate coral communities is also projected to decrease, although at a less pronounced rate, due to the higher tolerance of temperate corals for low Ωarag. Our study has two important caveats: first, it does not consider the potential adaptation of the coral communities, which would permit them to colonize habitats that are outside their current range. Second, it also does not consider whether or not coral communities can migrate quickly enough to actually occupy newly emerging habitats. As such, our results serve as a baseline for the assessment of the future evolution of coral habitats, but the consideration of important biological and ecological factors and feedbacks will be required to make more accurate projections.

  7. Ocean acidification limits temperature-induced poleward expansion of coral habitats around Japan

    Science.gov (United States)

    Yara, Y.; Vogt, M.; Fujii, M.; Yamano, H.; Hauri, C.; Steinacher, M.; Gruber, N.; Yamanaka, Y.

    2012-12-01

    Using results from four coupled global carbon cycle-climate models combined with in situ observations, we estimate the effects of future global warming and ocean acidification on potential habitats for tropical/subtropical and temperate coral communities in the seas around Japan. The suitability of coral habitats is classified on the basis of the currently observed regional ranges for temperature and saturation states with regard to aragonite (Ωarag). We find that, under the "business as usual" SRES A2 scenario, coral habitats are projected to expand northward by several hundred kilometers by the end of this century. At the same time, coral habitats are projected to become sandwiched between regions where the frequency of coral bleaching will increase, and regions where Ωarag will become too low to support sufficiently high calcification rates. As a result, the habitat suitable for tropical/subtropical corals around Japan may be reduced by half by the 2020s to 2030s, and is projected to disappear by the 2030s to 2040s. The habitat suitable for the temperate coral communities is also projected to decrease, although at a less pronounced rate, due to the higher tolerance of temperate corals for low Ωarag. Our study has two important caveats: first, it does not consider the potential adaptation of the coral communities, which would permit them to colonize habitats that are outside their current range. Second, it also does not consider whether or not coral communities can migrate quickly enough to actually occupy newly emerging habitats. As such, our results serve as a baseline for the assessment of the future evolution of coral habitats, but the consideration of important biological and ecological factors and feedbacks will be required to make more accurate projections.

  8. Plant-soil interactions in the expansion and native range of a poleward shifting plant species

    NARCIS (Netherlands)

    Grunsven, van R.H.A.; Putten, van der W.H.; Bezemer, T.M.; Berendse, F.; Veenendaal, E.M.

    2010-01-01

    Climate warming causes range shifts of many species toward higher latitudes and altitudes. However, range shifts of host species do not necessarily proceed at the same rates as those of their enemies and symbionts. Here, we examined how a range shifting plant species performs in soil from its

  9. Plant–soil interactions in the expansion and native range of a poleward shifting plant species

    NARCIS (Netherlands)

    Van Grunsven, R.H.A.; Van der Putten, W.H.; Bezemer, T.M.; Berendse, F.; Veenendaal, E.M.

    2010-01-01

    Climate warming causes range shifts of many species toward higher latitudes and altitudes. However, range shifts of host species do not necessarily proceed at the same rates as those of their enemies and symbionts. Here, we examined how a range shifting plant species performs in soil from its

  10. The poleward shift of storm tracks under global warming: A Lagrangian perspective

    Science.gov (United States)

    Tamarin, T.; Kaspi, Y.

    2017-10-01

    Comprehensive models of climate change projections have shown that the latitudinal band of extratropical storms will likely shift poleward under global warming. Here we study this poleward shift from a Lagrangian storm perspective, through simulations with an idealized general circulation model. By employing a feature tracking technique to identify the storms, we demonstrate that the poleward motion of individual cyclones increases with increasing global mean temperature. A potential vorticity tendency analysis of the cyclone composites highlights two leading mechanisms responsible for enhanced poleward motion: nonlinear horizontal advection and diabatic heating associated with latent heat release. Our results imply that for a 4 K rise in the global mean surface temperature, the mean poleward displacement of cyclones increases by about 0.85° of latitude, and this occurs in addition to a poleward shift of about 0.6° in their mean genesis latitude. Changes in cyclone tracks may have a significant impact on midlatitude climate, especially in localized storm tracks such as the Atlantic and Pacific storm tracks, which may exhibit a more poleward deflected shape.

  11. Kinetochore-independent chromosome poleward movement during anaphase of meiosis II in mouse eggs.

    Directory of Open Access Journals (Sweden)

    Manqi Deng

    Full Text Available Kinetochores are considered to be the key structures that physically connect spindle microtubules to the chromosomes and play an important role in chromosome segregation during mitosis. Due to different mechanisms of spindle assembly between centrosome-containing mitotic cells and acentrosomal meiotic oocytes, it is unclear how a meiotic spindle generates the poleward forces to drive two rounds of meiotic chromosome segregation to achieve genome haploidization. We took advantage of the fact that DNA beads are able to induce bipolar spindle formation without kinetochores and studied the behavior of DNA beads in the induced spindle in mouse eggs during meiosis II. Interestingly, DNA beads underwent poleward movements that were similar in timing and speed to the meiotic chromosomes, although all the beads moved together to the same spindle pole. Disruption of dynein function abolished the poleward movements of DNA beads but not of the meiotic chromosomes, suggesting the existence of different dynein-dependent and dynein-independent force generation mechanisms for the chromosome poleward movement, and the latter may be dependent on the presence of kinetochores. Consistent with the observed DNA bead poleward movement, sperm haploid chromatin (which also induced bipolar spindle formation after injection to a metaphase egg without forming detectable kinetochore structures also underwent similar poleward movement at anaphase as DNA beads. The results suggest that in the chromatin-induced meiotic spindles, kinetochore attachments to spindle microtubules are not absolutely required for chromatin poleward movements at anaphase.

  12. Simultaneous measurement of thermo-optic and thermal expansion coefficients with a single arm double interferometer.

    Science.gov (United States)

    Domenegueti, Jose Francisco Miras; Andrade, Acacio A; Pilla, Viviane; Zilio, Sergio Carlos

    2017-01-09

    A low-cost single arm double interferometer was developed for the concurrent measurement of linear thermal expansion (α) and thermo-optic (dn/dT) coefficients of transparent samples with plane and parallel surfaces. Owing to its common-path optical arrangement, the device is compact and stable, and allows the simultaneous measurement of interferences arising from a low-finesse Fabry-Perot etalon and from a Mach-Zehnder-type interferometer. The method was demonstrated with measurements of solid (silica, BK7, SF6) and liquid (water, ethanol and acetone) samples.

  13. A Noncontact Measurement Technique for the Density and Thermal Expansion Coefficient of Solid and Liquid Materials

    Science.gov (United States)

    Chung, Sang K.; Thiessen, David B.; Rhim, Won-Kyu

    1996-01-01

    A noncontact measurement technique for the density and the thermal expansion refractory materials in their molten as well as solid phases is presented. This technique is based on the video image processing of a levitated sample. Experiments were performed using the high-temperature electrostatic levitator (HTESL) at the Jet Propulsion Laboratory in which 2-3 mm diameter samples can be levitated, melted, and radiatively cooled in a vacuum. Due to the axisymmetric nature of the molten samples when levitated in the HTESL, a rather simple digital image analysis can be employed to accurately measure the volumetric change as a function of temperature. Density and the thermal expansion coefficient measurements were made on a pure nickel sample to test the accuracy of the technique in the temperature range of 1045-1565 C. The result for the liquid phase density can be expressed by p = 8.848 + (6.730 x 10(exp -4)) x T (degC) g/cu cm within 0.8% accuracy, and the corresponding thermal expansion coefficient can be expressed by Beta=(9.419 x 10(exp -5)) - (7.165 x 10(exp -9) x T (degC)/K within 0.2% accuracy.

  14. Expansion Rate Measurements at Moderate Pressure of Nonneutral Electron Plasmas in the Electron Diffusion Gauge (EDG) Experiment

    International Nuclear Information System (INIS)

    Morrison, Kyle A.; Davidson, Ronald C.; Paul, Stephen F.; Belli, Emily A.; Chao, Edward H.

    2001-01-01

    Measurements of the expansion rate of pure-electron plasmas have been performed on the Electron Diffusion Gauge (EDG) device at background helium gas pressures in the 5 x 10(superscript -8) Torr to 1 x 10(superscript -5) Torr range, where plasma expansion due to electron-neutral collisions dominates over plasma expansion due to trap asymmetries. It is found that the expansion rate, defined as the time rate of change of the particles' mean-square radius, scales approximately linearly with pressure and inversely as the square of the magnetic field strength in this regime, in agreement with classical predictions

  15. Measurement of Rapid Protein Diffusion in the Cytoplasm by Photo-Converted Intensity Profile Expansion

    Directory of Open Access Journals (Sweden)

    Rotem Gura Sadovsky

    2017-03-01

    Full Text Available The fluorescence microscopy methods presently used to characterize protein motion in cells infer protein motion from indirect observables, rather than measuring protein motion directly. Operationalizing these methods requires expertise that can constitute a barrier to their broad utilization. Here, we have developed PIPE (photo-converted intensity profile expansion to directly measure the motion of tagged proteins and quantify it using an effective diffusion coefficient. PIPE works by pulsing photo-convertible fluorescent proteins, generating a peaked fluorescence signal at the pulsed region, and analyzing the spatial expansion of the signal. We demonstrate PIPE’s success in measuring accurate diffusion coefficients in silico and in vitro and compare effective diffusion coefficients of native cellular proteins and free fluorophores in vivo. We apply PIPE to measure diffusion anomality in the cell and use it to distinguish free fluorophores from native cellular proteins. PIPE’s direct measurement and ease of use make it appealing for cell biologists.

  16. Measurement of thermal expansion coefficient of graphene diaphragm using optical fiber Fabry–Perot interference

    International Nuclear Information System (INIS)

    Li, Cheng; Liu, Qianwen; Peng, Xiaobin; Fan, Shangchun

    2016-01-01

    Application of the Fabry–Perot (FP) interference method for determining the coefficient of thermal expansion (CTE) of a graphene diaphragm is investigated in this paper. A miniature extrinsic FP interferometric (EFPI) sensor was fabricated by using an approximate 8-layer graphene diaphragm. The extremely thin diaphragm was transferred onto the endface of a ferrule with an inner diameter of 125 μ m, and van der Waals interactions between the graphene diaphragm and its substrate created a low finesse FP interferometer with a cavity length of 36.13 μ m. Double reference FP cavities using two cleaved optical fibers as reflectors were also constructed to differentially cancel the thermal expansion effects of the trapped gas and adhesive material. A temperature test demonstrated an approximate cavity length change of 166.1 nm °C −1 caused by film thermal expansion in the range of 20–60 °C. Then along with the established thermal deformation model of the suspended circular diaphragm, the calculated CTE ranging from  −9.98  ×  10 −6 K −1 to  −2.09  ×  10 −6 K −1 conformed well to the previously measured results. The proposed method would be applicable in other types of elastic materials as the sensitive diaphragm of an EFPI sensor over a wide temperature range. (paper)

  17. Measurements on thermal expansion with strain gauge 2; Yugami geji wo mochiita gokuteion netsu bochoritsu no keisoku 2

    Energy Technology Data Exchange (ETDEWEB)

    Arai, O.; Numazawa, T.; Sato, A. [National Research Inst. of Metals, Tokyo (Japan); Okuda, Y. [Tokyo Inst. of Tech., Tokyo (Japan)

    2000-05-29

    As the part of very low temperature thermophysical property measurement technique standardization by the intelligent basis promotion system, it examined very low temperature coefficient of linear expansion measurement method using the strain gauge. It produced the clip, which constituted the bridge circuit using strain sensor of 4 used by fatigue test of very low temperature, and it tried the measurement of convenient and quick coefficient of linear expansion from low temperature over high temperature. (NEDO)

  18. Nest expansion assay: a cancer systems biology approach to in vitro invasion measurements

    Directory of Open Access Journals (Sweden)

    Estrada Lourdes

    2009-07-01

    Full Text Available Abstract Background Traditional in vitro cell invasion assays focus on measuring one cell parameter at a time and are often less than ideal in terms of reproducibility and quantification. Further, many techniques are not suitable for quantifying the advancing margin of collectively migrating cells, arguably the most important area of activity during tumor invasion. We have developed and applied a highly quantitative, standardized, reproducible Nest Expansion Assay (NEA to measure cancer cell invasion in vitro, which builds upon established wound-healing techniques. This assay involves creating uniform circular "nests" of cells within a monolayer of cells using a stabilized, silicone-tipped drill press, and quantifying the margin expansion into an overlaid extracellular matrix (ECM-like component using computer-assisted applications. Findings The NEA was applied to two human-derived breast cell lines, MCF10A and MCF10A-CA1d, which exhibit opposite degrees of tumorigenicity and invasion in vivo. Assays were performed to incorporate various microenvironmental conditions, in order to test their influence on cell behavior and measures. Two types of computer-driven image analysis were performed using Java's freely available ImageJ software and its FracLac plugin to capture nest expansion and fractal dimension, respectively – which are both taken as indicators of invasiveness. Both analyses confirmed that the NEA is highly reproducible, and that the ECM component is key in defining invasive cell behavior. Interestingly, both analyses also detected significant differences between non-invasive and invasive cell lines, across various microenvironments, and over time. Conclusion The spatial nature of the NEA makes its outcome susceptible to the global influence of many cellular parameters at once (e.g., motility, protease secretion, cell-cell adhesion. We propose the NEA as a mid-throughput technique for screening and simultaneous examination of factors

  19. An Evaluation of Cosmological Models from the Expansion and Growth of Structure Measurements

    Science.gov (United States)

    Zhai, Zhongxu; Blanton, Michael; Slosar, Anže; Tinker, Jeremy

    2017-12-01

    We compare a large suite of theoretical cosmological models to observational data from the cosmic microwave background, baryon acoustic oscillation measurements of expansion, Type Ia supernova measurements of expansion, redshift space distortion measurements of the growth of structure, and the local Hubble constant. Our theoretical models include parametrizations of dark energy as well as physical models of dark energy and modified gravity. We determine the constraints on the model parameters, incorporating the redshift space distortion data directly in the analysis. To determine whether models can be ruled out, we evaluate the p-value (the probability under the model of obtaining data as bad or worse than the observed data). In our comparison, we find the well-known tension of H 0 with the other data; no model resolves this tension successfully. Among the models we consider, the large-scale growth of structure data does not affect the modified gravity models as a category particularly differently from dark energy models; it matters for some modified gravity models but not others, and the same is true for dark energy models. We compute predicted observables for each model under current observational constraints, and identify models for which future observational constraints will be particularly informative.

  20. Stability measures for rolling schedules with applications to capacity expansion planning, master production scheduling, and lot sizing

    OpenAIRE

    Kimms, Alf

    1996-01-01

    This contribution discusses the measurement of (in-)stability of finite horizon production planning when done on a rolling horizon basis. As examples we review strategic capacity expansion planning, tactical master production schedulng, and operational capacitated lot sizing.

  1. [The measurement of thermal expansion coefficient of Co-Cr alloy fabricated by selective laser melting].

    Science.gov (United States)

    Tian, Xiao-mei; Zeng, Li; Wei, Bin; Huang, Yi-feng

    2015-12-01

    To investigate the thermal expansion coefficient of different processing parameters upon the Co-Cr alloy prepared by selective laser melting (SLM) technique, in order to provide technical support for clinical application of SLM technology. The heating curve of self-made Co-Cr alloy was protracted from room temperature to 980°C centigrade with DIL402PC thermal analysis instrument, keeping temperature rise rate and cooling rate at 5 K/min, and then the thermal expansion coefficient of 9 groups of Co-Cr alloy was measured from 20°C centigrade to 500°C centigrade and 600°C centigrade. The 9 groups thermal expansion coefficient values of Co-Cr alloy heated from 20°C centigrade to 500°C centigrade were 13.9×10(-6)/K,13.6×10(-6)/K,13.9×10(-6)/K,13.7×10(-6)/K,13.5×10(-6)/K,13.8×10(-6)/K,13.7×10(-6)/K,13.7×10(-6)/K,and 13.9×10(-6)/K, respectively; when heated from 20°C centigrade to 600°C centigrade, they were 14.2×10(-6)/K,13.9×10(-6)/K,13.8×10(-6)/K,14.0×10(-6)/K,14.1×10(-6)/K,14.1×10(-6)/K,13.9×10(-6)/K,14.2×10(-6)/K, and 13.7×10(-6)/K, respectively. The results showed that the Co-Cr alloy has good matching with the VITA VMK 95 porcelain powder and can meet the requirement of clinic use.

  2. Empirical modeling of single-wake advection and expansion using full-scale pulsed lidar-based measurements

    DEFF Research Database (Denmark)

    Machefaux, Ewan; Larsen, Gunner Chr.; Troldborg, Niels

    2015-01-01

    and to obtain an estimate of the wake expansion in a fixed frame of reference. A comparison shows good agreement between the measured average expansion and the Computational Fluid Dynamics (CFD) large eddy simulation–actuator line computations. Frandsen’s expansion model seems to predict the wake expansion......In the present paper, single-wake dynamics have been studied both experimentally and numerically. The use of pulsed lidar measurements allows for validation of basic dynamic wake meandering modeling assumptions. Wake center tracking is used to estimate the wake advection velocity experimentally...... fairly well in the far wake but lacks accuracy in the outer region of the near wake. An empirical relationship, relating maximum wake induction and wake advection velocity, is derived and linked to the characteristics of a spherical vortex structure. Furthermore, a new empirical model for single...

  3. A Simple Method for Determining Thermal Expansion Coefficient of Solid Materials with a Computer-aided Electromagnetic Dilatometer Measuring System

    Directory of Open Access Journals (Sweden)

    Z. EZZOUINE

    2015-07-01

    Full Text Available In this study, we present a newly designed electromagnetic dilatometer with micrometer accuracy for the measurement of the coefficient of thermal expansion of a solid in the 30 °C – 96 °C temperature range .The device has a graphical user interface to view real time data measurement. Iron and copper were subjected to temperature change in the thermal expansion experiment causing them to expand linearly. The voltage delivered in the electromagnetic dilatometer system, which includes the information about linear expansion and temperature change were transferred to a computer via a data acquisition card, presented by a program created in the LabVIEW environment, and the amount of linear expansion was detected in real time. The minimal change in length of the sample that can be resolved is 5µm, which yields the sensitivity comprised between 10-4 µm and 10-5 µm. In order to calibrate the electromagnetic dilatometer, thermal expansion coefficients of copper and Iron have been measured. By this technique, the thermal expansion coefficient can be determined with an acceptable accuracy. The present results appear also to agree well with those reported previously in the literature.

  4. Lagrangian transport in poleward breaking Rossby waves in the North Atlantic - Europe tropopause region

    Energy Technology Data Exchange (ETDEWEB)

    Bartels, J.; Peters, D. [Rostock Univ. (Germany). Inst. fuer Atmosphaerenphysik

    1997-12-31

    The poleward advection of upper-tropospheric air is investigated for poleward Rossby wave breaking events. During boreal winter months the isentropic deformations of the tropopause are examined using maps of Ertel`s potential vorticity (EPV) and contour advection (CA) calculations. The role of ambient baro-tropic flow is further examined by idealized numerical models. In the vicinity of the tropopause the characteristic Lagrangian transport of air masses for ECMWF-analysis data are compared with high resolution (T106) ECHAM4 experiments. (author) 3 refs.

  5. Measurement of total ultrasonic power using thermal expansion and change in buoyancy of an absorbing target.

    Science.gov (United States)

    Dubey, P K; Kumar, Yudhisther; Gupta, Reeta; Jain, Anshul; Gohiya, Chandrashekhar

    2014-05-01

    The Radiation Force Balance (RFB) technique is well established and most widely used for the measurement of total ultrasonic power radiated by ultrasonic transducer. The technique is used as a primary standard for calibration of ultrasonic transducers with relatively fair uncertainty in the low power (below 1 W) regime. In this technique, uncertainty comparatively increases in the range of few watts wherein the effects such as thermal heating of the target, cavitations, and acoustic streaming dominate. In addition, error in the measurement of ultrasonic power is also caused due to movement of absorber at relatively high radiated force which occurs at high power level. In this article a new technique is proposed which does not measure the balance output during transducer energized state as done in RFB. It utilizes the change in buoyancy of the absorbing target due to local thermal heating. The linear thermal expansion of the target changes the apparent mass in water due to buoyancy change. This forms the basis for the measurement of ultrasonic power particularly in watts range. The proposed method comparatively reduces uncertainty caused by various ultrasonic effects that occur at high power such as overshoot due to momentum of target at higher radiated force. The functionality of the technique has been tested and compared with the existing internationally recommended RFB technique.

  6. Decline and poleward shift in Indian summer monsoon synoptic activity in a warming climate.

    Science.gov (United States)

    Sandeep, S; Ajayamohan, R S; Boos, William R; Sabin, T P; Praveen, V

    2018-03-13

    Cyclonic atmospheric vortices of varying intensity, collectively known as low-pressure systems (LPS), travel northwest across central India and produce more than half of the precipitation received by that fertile region and its ∼600 million inhabitants. Yet, future changes in LPS activity are poorly understood, due in part to inadequate representation of these storms in current climate models. Using a high-resolution atmospheric general circulation model that realistically simulates the genesis distribution of LPS, here we show that Indian monsoon LPS activity declines about 45% by the late 21st century in simulations of a business-as-usual emission scenario. The distribution of LPS genesis shifts poleward as it weakens, with oceanic genesis decreasing by ∼60% and continental genesis increasing by ∼10%; over land the increase in storm counts is accompanied by a shift toward lower storm wind speeds. The weakening and poleward shift of the genesis distribution in a warmer climate are confirmed and attributed, via a statistical model, to the reduction and poleward shift of low-level absolute vorticity over the monsoon region, which in turn are robust features of most coupled model projections. The poleward shift in LPS activity results in an increased frequency of extreme precipitation events over northern India. Copyright © 2018 the Author(s). Published by PNAS.

  7. Poleward propagating subinertial alongshore surface currents off the U.S. West Coast

    KAUST Repository

    Kim, Sung Yong

    2013-12-01

    The network comprising 61 high-frequency radar systems along the U.S. West Coast (USWC) provides a unique, high resolution, and broad scale view of ocean surface circulation. Subinertial alongshore surface currents show poleward propagating signals with phase speeds of O(10) and O(100-300) km d -1 that are consistent with historical in situ observations off the USWC and that can be possibly interpreted as coastally trapped waves (CTWs). The propagating signals in the slow mode are partly observed in southern California, which may result from scattering and reflection of higher-mode CTWs due to curvature of shoreline and bathymetry near Point Conception, California. On the other hand, considering the order of the phase speed in the slow mode, the poleward propagating signals may be attributed to alongshore advection or pressure-driven flows. A statistical regression of coastal winds at National Data Buoy Center buoys on the observed surface currents partitions locally and remotely wind-forced components, isolates footprints of the equatorward propagating storm events in winter off the USWC, and shows the poleward propagating signals year round. Key Points A unique resource to examine synoptic-scale alongshore variability Isolation of equatorward wind events in winter using a statistical model Poleward propagating surface signals year-round © 2013. American Geophysical Union. All Rights Reserved.

  8. Decline and poleward shift in Indian summer monsoon synoptic activity in a warming climate

    Science.gov (United States)

    Sandeep, S.; Ajayamohan, R. S.; Boos, William R.; Sabin, T. P.; Praveen, V.

    2018-03-01

    Cyclonic atmospheric vortices of varying intensity, collectively known as low-pressure systems (LPS), travel northwest across central India and produce more than half of the precipitation received by that fertile region and its ˜600 million inhabitants. Yet, future changes in LPS activity are poorly understood, due in part to inadequate representation of these storms in current climate models. Using a high-resolution atmospheric general circulation model that realistically simulates the genesis distribution of LPS, here we show that Indian monsoon LPS activity declines about 45% by the late 21st century in simulations of a business-as-usual emission scenario. The distribution of LPS genesis shifts poleward as it weakens, with oceanic genesis decreasing by ˜60% and continental genesis increasing by ˜10%; over land the increase in storm counts is accompanied by a shift toward lower storm wind speeds. The weakening and poleward shift of the genesis distribution in a warmer climate are confirmed and attributed, via a statistical model, to the reduction and poleward shift of low-level absolute vorticity over the monsoon region, which in turn are robust features of most coupled model projections. The poleward shift in LPS activity results in an increased frequency of extreme precipitation events over northern India.

  9. Plants on the move: plant-soil interactions in poleward shifting plant species

    NARCIS (Netherlands)

    Grunsven, van R.H.A.

    2008-01-01

    As a result of recent global climate change, areas that have previously been climatically unsuitable for species have now become suitable new habitats. Many plant-species are expanding their range polewards, colonizing these newly available areas. If these species are able to expand their range

  10. Laboratory measurements of the coefficient of thermal expansion of Olkiluoto drill core samples

    International Nuclear Information System (INIS)

    Aakesson, U.

    2012-04-01

    The coefficient of thermal expansion and the wet density has been determined on 22 specimens from the ONKALO drillholes ONK-PP167, ONK-PP199, ONK-PP224, ONK-PP225 and ONK-PP226, Olkiluoto, Finland. The coefficient of thermal expansion has been determined in the temperature interval 20-60 deg C. The results indicated that the thermal expansion was almost linear, and the coefficient of thermal expansion for the investigated specimens range between 3.2 and 14.4 x 10 -6 mm/mm deg C, and the wet density between 2,610 and 2,820 kg/m 3 . The granite pegmatite has slightly lower coefficient of thermal expansion and wet density than gneissic rocks. (orig.)

  11. Thermal expansion measurement of turbine and main steam piping by using strain gages in power plants

    International Nuclear Information System (INIS)

    Na, Sang Soo; Chung, Jae Won; Bong, Suk Kun; Jun, Dong Ki; Kim, Yun Suk

    2000-01-01

    One of the domestic co-generation plants have undergone excessive vibration problems of turbine attributed to external force for years. The root cause of turbine vibration may be shaft alignment problem which sometimes is changed by thermal expansion and external force, even if turbine technicians perfectly performed it. To evaluate the alignment condition from plant start-up to full load, a strain measurement of turbine and main steam piping subjected to thermal loading is monitored by using strain gages. The strain gages are bonded on both bearing housing adjusting bolts and pipe stoppers which installed in the x-direction of left-side main steam piping near the turbine inlet in order to monitor closely the effect of turbine under thermal deformation of turbine casing and main steam piping during plant full load. Also in situ load of constant support hangers in main steam piping system is measured by strain gages and its results are used to rebalance the hanger rod load. Consequently, the experimental stress analysis by using strain gages turns out to be very useful tool to diagnose the trouble and failures of not only to stationary components but to rotating machinery in power plants

  12. Large Uncertainty in the Relative Rates of Dynamical and Hydrological Tropical Expansion

    Science.gov (United States)

    Seviour, William J. M.; Davis, Sean M.; Grise, Kevin M.; Waugh, Darryn W.

    2018-01-01

    Climate models predict that the Hadley circulation will expand poleward in a warmer climate, a trend which may cause significant changes in global precipitation patterns. However, recent studies have disagreed as to how strongly changes in the Hadley circulation and changes in the hydrological cycle (specifically the latitude at which precipitation balances evaporation) are related. Here we analyze dynamical and hydrological measures of the Southern Hemisphere edge of the tropics using simulations from the fifth Coupled Model Intercomparison Project (CMIP5) and four reanalysis data sets. In simulations with an abrupt quadrupling of atmospheric CO2 concentrations, all models show a poleward expansion in both metrics. However, there is a large spread among models; the ratio of the hydrological to dynamical expansions varies from 0.6 to 1.4. We show that this model spread can be largely explained by differences in internal variability, which in turn is related to the mean state of models. Differences in mean states among reanalyses are similar to those of models, and so reanalyses do not help constrain uncertainty in model trends.

  13. Thermal expansion and density measurements of molten and solid materials at high temperatures by the gamma attenuation technique

    International Nuclear Information System (INIS)

    Drotning, W.D.

    1979-05-01

    An apparatus is described for the measurement of the density and thermal expansion of molten materials to 3200 0 K using the gamma attenuation technique. The precision of the experimental technique was analytically examined for both absolute and relative density determinations. Three analytical expressions used to reduce data for liquid density determinations were evaluated for their precision. Each allows use of a different set of input data parameters, which can be chosen based on experimental considerations. Using experimentally reasonable values for the precision of the parameters yields a similar resultant density precision from the three methods, on the order of 0.2%. The analytical method for measurements of the linear thermal expansion of solids by the gamma method is also described. To demonstrate the use of the technique on reasonably well-characterized systems, data are presented for (1) the density and thermal expansion of molten tin, lead, and aluminum to 1300 0 K, (2) the thermal expansion of solid aluminum to the melting point, and (3) the thermal expansion of a low melting point glass through the transition temperature and melting region. The data agree very well with published results using other methods where such published data exist

  14. A rapid heating and cooling rate dilatometer for measuring thermal expansion in dental porcelain.

    Science.gov (United States)

    Twiggs, S W; Searle, J R; Ringle, R D; Fairhurst, C W

    1989-09-01

    Herein we describe a dilatometer that consists of a low-mass infrared furnace for rapid heating or cooling, an optical pyrometer, and a laser interferometer. The dilatometer facilitates observations of thermal expansion at rates comparable with those in dental laboratory practice over the temperature range necessary for comparison of thermal expansion of dental porcelain and alloy. Examples of thermal expansion data obtained at a 600 degrees C/min heating rate on NIST SRM 710 glass and dental porcelain are reported. To a limited extent, thermal expansion data above the glass-transition temperature range of dental porcelain were obtained. A shift of the glass-transition temperature range to higher temperatures was observed for both materials, compared with data obtained at 20 degrees C/min.

  15. Tree component biomass expansion factors and root-to-shoot ratio of Lebombo ironwood: measurement uncertainty.

    Science.gov (United States)

    Magalhães, Tarquinio Mateus; Seifert, Thomas

    2015-12-01

    National and regional aboveground biomass (AGB) estimates are generally computed based on standing stem volume estimates from forest inventories and default biomass expansion factors (BEFs). AGB estimates are converted to estimates of belowground biomass (BGB) using default root-to-shoot ratios (R/S). Thus, BEFs and R/S are not estimated in ordinary forest inventories, which results in uncertainty in estimates of AGB and BGB. Here, we measured BEF and R/S values (including uncertainty) for different components of Lebombo ironwood ( Androstachys johnsonii Prain) trees and assessed their dependence on tree size. The BEF values of tree components were unrelated or weakly related to tree size, and R/S was independent of tree size. BEF values varied from 0.02 for foliage to 1.31 Mg m -3 for whole tree; measurement uncertainty (SE) varied from 2.9% for stem BEF to 10.6% for whole-tree BEF. The belowground, aboveground, and whole-tree BEF-based biomass densities were 30 ± 2.3 (SE = 3.89%), 121 ± 7.84 (SE = 3.23%), and 151 ± 9.87 Mg ha -1 (SE = 3.27%), respectively. R/S was 0.24 with an uncertainty of 3.4%. Based on the finding of independence or weak dependence of BEF on tree size, we concluded that, for A. johnsonii , constant component BEF values can be accurately used within the interval of harvested tree sizes.

  16. Simultaneous interferometric measurement of linear coefficient of thermal expansion and temperature-dependent refractive index coefficient of optical materials.

    Science.gov (United States)

    Corsetti, James A; Green, William E; Ellis, Jonathan D; Schmidt, Greg R; Moore, Duncan T

    2016-10-10

    Characterizing the thermal properties of optical materials is necessary for understanding how to design an optical system for changing environmental conditions. A method is presented for simultaneously measuring both the linear coefficient of thermal expansion and the temperature-dependent refractive index coefficient of a sample interferometrically in air. Both the design and fabrication of the interferometer is presented as well as a discussion of the results of measuring both a steel and a CaF2 sample.

  17. Method for measurement of relative differences in thermal expansion coefficients (LWBR development program)

    International Nuclear Information System (INIS)

    Alexander, J.E.

    1978-06-01

    The report describes a test which was conducted to determine the variation in thermal expansion coefficients of specimens from several material heats of Type 304 stainless steel. The purpose of this document is to identify the procedures, equipment, and analysis used in performing this test. From a review of the data which were used in establishing the values given for mean coefficient of thermal expansion in the 1968 ASME Boiler and Pressure Vessel Code, Section III, a +-3.3-percent maximum variation was determined for Type 304 CRES in the temperature range of interest. The results of the test reduced this variation to +-0.53 percent based on a 95/99-percent tolerance interval for the material tested. The testing equipment, procedure, and analysis are not complicated and this type of test is recommended for applications in which the variation in thermal expansion coefficients is desired for a limited number of material heats

  18. A note on poleward undercurrent along the southwest coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Muraleedharan, P.M.; RameshKumar, M.R.; Rao, L.V.G.

    . The climatological data supports this observation but the wind stress further south contradicts the climatological picture. Similarly the trend of the northerly wind from Cochin to Marmagao appears to be far from reality when compared to the climatological wind... and SALAT, 1981). If the narrowing of surface currents at Quilon is associated with the topography of the sea floor which could funnel or constrict the longshore current, it might augment the intensity of upwelling close to the coast• The poleward...

  19. Changing storm track diffusivity and the upper limit to poleward latent heat transport

    Science.gov (United States)

    Caballero, R.

    2010-12-01

    Poleward atmospheric energy transport plays a key role in the climate system by helping set the mean equator-pole temperature gradient. The mechanisms controlling the response of poleward heat flux to climate change are still poorly understood. Recent work shows that midlatitude poleward latent heat flux in atmospheric GCMs generally increases as the climate warms but reaches an upper limit at sufficiently high temperature and decreases with further warming. The reasons for this non-monotonic behavior have remained unclear. Simple arguments suggests that the latent heat flux Fl should scale as Fl ˜ vref qs, where vref is a typical meridional velocity in the baroclinic zone and qs is saturation humidity. While vref decreases with temperature, qs increases much more rapidly, so this scaling implies monotonically increasing moisture flux. We study this problem using a series of simulations employing NCAR’s CAM3 GCM coupled to a slab-ocean aquaplanet and spanning a wide range of atmospheric CO2 concentrations. We find that a modified scaling, Fl ˜ vref2 qs, describes the changes in moisture flux much more accurately. Using Lagrangian trajectory analysis, we explain the success of this scaling in terms of changes in the mixing length, which contracts proportionally to vref.

  20. Local measurement and numerical calculation on turbulent two-phase flow in a vertical pipe with sudden expansion

    International Nuclear Information System (INIS)

    Kondo, Koichi; Yoshida, Kenji; Okawa, Tomio; Kataoka, Isao

    2004-01-01

    Experiment and numerical calculation were carried out for upward, turbulent bubbly two-phase flow in a vertical pipe with an axisymmetric sudden expansion, which is one of the typical multi-dimensional channel geometries. The void fraction, the liquid velocity and turbulent intensity along the flow direction below and the above the sudden expansion point were measured for various turbulent flow conditions by using a point-electrode resistivity probe and a hot-film anemometry probe. They showed quite complicated behaviors depending upon flow rates of gas and liquid phases and bubble size. In particular, the geometry of sudden expansion affected on the bubble behaviors in multi-dimensional two-phase flow, such as the bubble-stagnation, the bubble-deformation, the enhancement and suppression effects due to the two-phase turbulence etc. Through the measurements, fundamental parameters of the two-phase flow were clarified for the sudden expansion channel. Moreover, a three-dimensional one-way bubble tracking simulation of a single bubble behavior in turbulent flow field along the downstream of the sudden expansion was also demonstrated where equation of motion of bubble was solved by assuming appropriate constitutive models and turbulence model. Based on the trajectories of large number of bubbles, the void fraction distribution was predicted in this calculation. It concretely revealed that the lift force and the two-phase turbulence model were the most important parameters in determining the multi-dimensional void fraction distribution and the calculation should be considered by using the measured experimental data. (author)

  1. Identification of expansive soils using remote sensing and in-situ field measurements : phase I.

    Science.gov (United States)

    2012-10-01

    Researchers at the University of Arkansas have conducted research on the suitability of using remote sensing techniques (radar and LIDAR) to monitor the shrink-swell behavior of an expansive clay material in a field test site as part of the Mack Blac...

  2. Long-term trends of typhoon-induced rainfall over Taiwan: in situ evidence of poleward shift of typhoons in western North Pacific in recent decades

    Science.gov (United States)

    Liang, Ting-Yu; Oey, Leo; Huang, Shiming; Chou, Simon

    2017-04-01

    Tracks of tropical cyclones or typhoons in the western North Pacific have recently been shown to shift northward in the past several decades; the poleward shift has been attributed to the expansion of the tropics due to climate warming. Here we use 64-year, hourly rainfall observations around Taiwan, and take advantage of the unique terrain and geographic location of the island with respect to typhoon tracks, to show that since 1950 the typhoon-related rainfalls have been rising on the western side of the island, but decreasing on the eastern side. We show that these extraordinary rainfall patterns, despite the smallness of Taiwan, are indicative of a northward shift of typhoons related to the changes in the wind fields and surface warming over the Indian and Pacific tropical/subtropical regions.

  3. Maxillary Expansion

    OpenAIRE

    Agarwal, Anirudh; Mathur, Rinku

    2010-01-01

    ABSTRACT Maxillary transverse discrepancy usually requires expansion of the palate by a combination of orthopedic and orthodontic tooth movements. Three expansion treatment modalities are used today: rapid maxillary expansion, slow maxillary expansion and surgically assisted maxillary expansion.This article aims to review the maxillary expansion by all the three modalities and a brief on commonly used appliances.

  4. Linear Thermal Expansion Measurements of Lead Magnesium Niobate (PMN) Electroceramic Material for the Terrestrial Planet Finder Coronagraph

    Science.gov (United States)

    Karlmann, Paul B.; Halverson, Peter G.; Peters, Robert D.; Levine, Marie B.; VanBuren, David; Dudik, Matthew J.

    2005-01-01

    Linear thermal expansion measurements of nine samples of Lead Magnesium Niobate (PMN) electroceramic material were recently performed in support of NASA's Terrestrial Planet Finder Coronagraph (TPF-C) mission. The TPF-C mission is a visible light coronagraph designed to look at roughly 50 stars pre- selected as good candidates for possessing earth-like planets. Upon detection of an earth-like planet, TPF-C will analyze the visible-light signature of the planet's atmosphere for specific spectroscopic indicators that life may exist there. With this focus, the project's primary interest in PMN material is for use as a solid-state actuator for deformable mirrors or compensating optics. The nine test samples were machined from three distinct boules of PMN ceramic manufactured by Xinetics Inc. Thermal expansion measurements were performed in 2005 at NASA Jet Propulsion Laboratory (JPL) in their Cryogenic Dilatometer Facility. All measurements were performed in vacuum with sample temperature actively controlled over the range of 270K to 3 10K. Expansion and contraction of the test samples with temperature was measured using a JPL developed interferometric system capable of sub-nanometer accuracy. Presented in this paper is a discussion of the sample configuration, test facilities, test method, data analysis, test results, and future plans.

  5. An explanation of auroral intensification during the substorm expansion phase

    Science.gov (United States)

    Yao, Zhonghua; Rae, I. J.; Lui, A. T. Y.; Murphy, K. R.; Owen, C. J.; Pu, Z. Y.; Forsyth, C.; Grodent, D.; Zong, Q.-G.; Du, A. M.; Kalmoni, N. M. E.

    2017-08-01

    A multiple auroral onset substorm on 28 March 2010 provides an opportunity to understand the physical mechanism in generating auroral intensifications during a substorm expansion phase. Conjugate observations of magnetic fields and plasma from the Time History of Events and Macroscale Interactions during Substorms (THEMIS) spacecraft, of field-aligned currents (FACs) from the Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE) satellites, and from ground-based magnetometers and aurora are all available. The comprehensive measurements allow us to further our understanding of the complicated causalities among dipolarization, FAC generation, particle acceleration, and auroral intensification. During the substorm expansion phase, the plasma sheet expanded and was perturbed leading to the generation of a slow mode wave, which modulated electron flux in the outer plasma sheet. During this current sheet expansion, field-aligned currents formed, and geomagnetic perturbations were simultaneously detected by ground-based instruments. However, a magnetic dipolarization did not occur until about 3 min later in the outer plasma sheet observed by THEMIS-A spacecraft (THA). We believe that this dipolarization led to an efficient Fermi acceleration to electrons and consequently the cause of a significant auroral intensification during the expansion phase as observed by the All-Sky Imagers (ASIs). This Fermi acceleration mechanism operating efficiently in the outer plasma sheet during the expansion phase could be a common explanation of the poleward auroral development after substorm onset. These results also show a good agreement between the upward FAC derived from AMPERE measurements and the auroral brightening observed by the ASIs.

  6. Non-contact measurement of the coefficient of thermal expansion of Al 6061-T6 with fiber Bragg grating sensors

    Energy Technology Data Exchange (ETDEWEB)

    Hayat, Khazar; Ha, Sung Kyu [Hanyang University, Ansan (Korea, Republic of)

    2014-02-15

    An experimental study describing the non-contact measurement of the coefficient of thermal expansion of an aluminum (Al-6061-T6) specimen with two fiber Bragg grating sensors using a pair of C-lens collimators was carried out. The collimators were used for the free space coupling between the fiber Bragg sensors and the optical sensing interrogator. During the experiment, the wavelength distortion of the optical signals was observed. Consequently, the measured thermal strains were corrected using an estimated collimator correction factor of 0.8466. The coefficient of thermal expansion of the specimen was then calculated to be (22.0 ± 0.1)X10{sup -60} C{sup -1} for every 5 .deg. C step in the range 35 .deg. C ∼ 75 .deg. C, which was in good agreement with the typical value of 23.6X10{sup -60}C{sup -1} for aluminum.

  7. Technique for Exterior Expansion Measurement During Autofrettaging for Constant Fatigue Life

    OpenAIRE

    Rajeev M. Bhatnagar

    2014-01-01

    In an autofrettage process a given thick cylinder is subjected to such a pressure which gives a specified depth of elasto-plastic boundary. The outside diameter expansion during autofrettage process is a function of depth of autofrettage. To obtain a specified depth of elastic-plastic interface, the applied autofrettage pressure increases in direct proportion to the proof stress of the pressure vessel material. Although this increases the load bearing capacity of the barrel, resulting in enh...

  8. Continual Measuring of Local Stress Values on Shell of the Blast Furnace Hearth and of Total Shell Expansion

    Directory of Open Access Journals (Sweden)

    P. Bigoš

    2012-01-01

    Full Text Available This paper deals with installation of strain gauges on the external surface of the blast furnace shell in two rows, whereas there will be defi ned 8 measuring points in every row. The fi nal result is evaluation of data obtained during up to 45 days of the operation. In this papers are commentary and discussions to measured time behaviours. The main purpose of this measuring was investigation of impact of salamander on blast furnace shell expansion after its lay off , cooling and next starting of operation.

  9. Absolute linear thermal-expansion measurements on copper and aluminum from 5 to 320 K

    International Nuclear Information System (INIS)

    Kroeger, F.R.; Swenson, C.A.

    1977-01-01

    A linear absolute dilatometer based on a three-terminal parallel-plate capacitor design has been used to obtain thermal expansion data for high-purity copper and aluminum from 5 to 320 K. These data have an absolute accuracy of +- 0.1% above 20 K for copper and above 30 K for aluminum, and agree well with published data at the higher temperatures. The disagreement which exists with other data below 5 K for copper and below 15 K for aluminum is believed to be sample dependent, but the mechanism is not known. The aluminum results in this region depend on the state of annealing of the sample

  10. Are Calanus spp. shifting poleward in the North Atlantic? A habitat modelling approach

    KAUST Repository

    Chust, Guillem

    2013-09-16

    In the last decade, the analysis based on Continuous Plankton Recorder survey in the eastern North Atlantic Ocean detected one of the most striking examples of marine poleward migration related to sea warming. The main objective of this study is to verify the poleward shift of zooplankton species (Calanus finmarchicus, C. glacialis, C. helgolandicus, C. hyperboreus) for which distributional changes have been recorded in the North Atlantic Ocean and to assess how much of this shift was triggered by sea warming, using Generalized Additive Models. To this end, the population gravity centre of observed data was compared with that of a series of simulation experiments: (i) a model using only climate factors (i.e. niche-based model) to simulate species habitat suitability, (ii) a model using only temporal and spatial terms to reconstruct the population distribution, and (iii) a model using both factors combined, using a subset of observations as independent dataset for validation. Our findings show that only C. finmarchicus had a consistent poleward shift, triggered by sea warming, estimated in 8.1 km per decade in the North Atlantic (16.5 per decade for the northeast), which is substantially lower than previous works at the assemblage level and restricted to the Northeast Atlantic. On the contrary, C. helgolandicus is expanding in all directions, although its northern distribution limit in the North Sea has shifted northward. Calanus glacialis and C. hyperboreus, which have the geographic centres of populations mainly in the NW Atlantic, showed a slight southward shift, probably responding to cool water penetrating southward in the Labrador Current. Our approach, supported by high model accuracy, shows its power in detecting species latitudinal shifts and identifying its causes, since the trend of occurrence observed data is influenced by the sampling frequency, which has progressively concentrated to lower latitudes with time. © 2013 © 2013 International Council for

  11. A comparison of measured and predicted test flow in an expansion tube with air and oxygen test gases

    Science.gov (United States)

    Aaggard, K. V.; Goad, W. K.

    1975-01-01

    Simultaneous time-resolved measurements of temperature, density, pitot pressure, and wall pressure in both air and O2 test gases were obtained in the Langley pilot model expansion tube. These tests show nonequilibrium chemical and vibrational relaxation significantly affect the test-flow condition. The use of an electromagnetic device to preopen the secondary diaphragm before the arrival of the primary shock wave resulted in an improvement in the agreement between the measured pitot pressure and the value inferred from measured density and interface velocity. Boundary-layer splitter plates used to reduce the wall boundary layer show that this disagreement in the measured and inferred pitot pressures is not a result of boundary-layer effects.

  12. Poleward energy transport: is the standard definition physically relevant at all time scales?

    Science.gov (United States)

    Liang, Minyi; Czaja, Arnaud; Graversen, Rune; Tailleux, Remi

    2018-03-01

    Poleward energy transport in the atmosphere and oceans constitutes an important branch of the global energy budget, and its role in the climate system has been the subject of many studies. In the atmosphere, the transport is affected by "eddies" and large scale meridional cells, both with zero net mass transport across latitude circles, but also partly by processes associated with a net transport of mass across latitude circles. The latter must cease to operate in steady state, but they may be significant when time variability of the heat budget is considered. Indeed, examination of reanalysis data on short (daily to monthly) timescales shows that mass variations on these timescales result in surprisingly large fluctuations (in excess of 10^{15} W = 1 PW) in the poleward heat transport. These fluctuations are referred to as "extensive", for they primarily alter the mass integrated energy of the region considered, but not its averaged value. It is suggested that extensive fluctuations mask more meaningful climate signals present in the heat transport variability on monthly and interannual timescales, and a new formulation is proposed to isolate the latter. This new formulation is applied successfully to reanalysis data and climate model simulations.

  13. Optical temperature sensor and thermal expansion measurement using a femtosecond micromachined grating in 6H-SiC.

    Science.gov (United States)

    DesAutels, G Logan; Powers, Peter; Brewer, Chris; Walker, Mark; Burky, Mark; Anderson, Gregg

    2008-07-20

    An optical temperature sensor was created using a femtosecond micromachined diffraction grating inside transparent bulk 6H-SiC, and to the best of our knowledge, this is a novel technique of measuring temperature. Other methods of measuring temperature using fiber Bragg gratings have been devised by other groups such as Zhang and Kahrizi [in MEMS, NANO, and Smart Systems (IEEE, 2005)]. This temperature sensor was, to the best of our knowledge, also used for a novel method of measuring the linear and nonlinear coefficients of the thermal expansion of transparent and nontransparent materials by means of the grating first-order diffracted beam. Furthermore the coefficient of thermal expansion of 6H-SiC was measured using this new technique. A He-Ne laser beam was used with the SiC grating to produce a first-order diffracted beam where the change in deflection height was measured as a function of temperature. The grating was micromachined with a 20 microm spacing and has dimensions of approximately 500 microm x 500 microm (l x w) and is roughly 0.5 microm deep into the 6H-SiC bulk. A minimum temperature of 26.7 degrees C and a maximum temperature of 399 degrees C were measured, which gives a DeltaT of 372.3 degrees C. The sensitivity of the technique is DeltaT=5 degrees C. A maximum deflection angle of 1.81 degrees was measured in the first-order diffracted beam. The trend of the deflection with increasing temperature is a nonlinear polynomial of the second-order. This optical SiC thermal sensor has many high-temperature electronic applications such as aircraft turbine and gas tank monitoring for commercial and military applications.

  14. Poleward propagation of boreal summer intraseasonal oscillations in a coupled model: role of internal processes

    Science.gov (United States)

    Ajayamohan, R. S.; Annamalai, H.; Luo, Jing-Jia; Hafner, Jan; Yamagata, Toshio

    2011-09-01

    The study compares the simulated poleward migration characteristics of boreal summer intraseasonal oscillations (BSISO) in a suite of coupled ocean-atmospheric model sensitivity integrations. The sensitivity experiments are designed in such a manner to allow full coupling in specific ocean basins but forced by temporally varying monthly climatological sea surface temperature (SST) adopted from the fully coupled model control runs (ES10). While the local air-sea interaction is suppressed in the tropical Indian Ocean and allowed in the other oceans in the ESdI run, it is suppressed in the tropical Pacific and allowed in the other oceans in the ESdP run. Our diagnostics show that the basic mean state in precipitation and easterly vertical shear as well as the BSISO properties remain unchanged due to either inclusion or exclusion of local air-sea interaction. In the presence of realistic easterly vertical shear, the continuous emanation of Rossby waves from the equatorial convection is trapped over the monsoon region that enables the poleward propagation of BSISO anomalies in all the model sensitivity experiments. To explore the internal processes that maintain the tropospheric moisture anomalies ahead of BSISO precipitation anomalies, moisture and moist static energy budgets are performed. In all model experiments, advection of anomalous moisture by climatological winds anchors the moisture anomalies that in turn promote the northward migration of BSISO precipitation. While the results indicate the need for realistic simulation of all aspects of the basic state, our model results need to be taken with caution because in the ECHAM family of coupled models the internal variance at intraseasonal timescales is indeed very high, and therefore local air-sea interactions may not play a pivotal role.

  15. T1 Measurements for Detection of Expansion of the Myocardial Extracellular Volume in Chronic Obstructive Pulmonary Disease

    Science.gov (United States)

    Neilan, Tomas G; Bakker, Jessie P; Sharma, Bhavneesh; Owens, Robert L.; Farhad, Hoshang; Shah, Ravi V; Abbasi, Siddique A; Kohli, Puja; Wilson, Joel; DeMaria, Anthony; Jerosch-Herold, Michael; Kwong, Raymond Y.; Malhotra, Atul

    2014-01-01

    Background We aimed to assess whether chronic obstructive pulmonary disease (COPD) is associated with expansion of the myocardial extracellular volume (ECV) using T1 measurements. Methods Adult COPD patients (GOLD stage 2 or higher) and free of known cardiovascular disease were recruited. All study patients underwent measures of pulmonary function, 6-minute walk test, serum measures of inflammation, overnight polysomnography, and a contrast CMR study. Results Eight patients with COPD were compared to 8 healthy control subjects. The mean predicted FEV1% of COPD subjects was 68%. Compared to controls, patients had normal left ventricular (LV) and right ventricular size, mass, and function. However, as compared to controls, the LV remodeling index (median 0.87 IQR 0.43 vs. median 0.62 IQR 0.17, p=0.03) and active left atrial emptying fraction was increased (median 46 IQR 8 vs. median 38 IQR 10, p=0.005), and passive left atrial emptying fraction was reduced (median 24 IQR 10 vs. median 44 IQR 20, p=0.007). The ECV was increased in patients with COPD (median 0.32 IQR 0.05 vs. median 0.27 IQR 0.05, p=0.001). The ECV showed a strong positive association with LV remodeling (r = 0.72, p = 0.04) and an inverse association with the 6-minute walk duration (r = −0.79, p = 0.02) and passive left atrial emptying fraction (r = −0.68, p = 0.003). Conclusions Expansion of the ECV, suggestive of diffuse myocardial fibrosis, is present in COPD and is associated with LV remodeling, reduced left atrial function and exercise capacity. PMID:25442461

  16. Linear Thermal Expansion Measurements with Sub-Atomic Resolution for the Study of Phase Transitions in Novel Condensed Matter Systems. Final Report

    International Nuclear Information System (INIS)

    Neumeier, John J.

    2010-01-01

    This grant has involved numerous projects focusing on further development of thermal expansion measurement technology. Significant improvements to our novel quartz thermal expansion cell have been realized. We have developed an absolute method for measuring the thermal expansion of materials under consideration for use in thermal expansion cell construction. The work associated with this grant has significantly expanded the capabilities and infrastructure for the measurement of the thermal expansion of solids at Montana State University. The techniques we develop have been transferred to students and postdocs through the training they receive. The National High Magnetic Field Laboratory (NHMFL) in Los Alamos has collaborated with the PI to import our quartz thermal expansion cells for measurements in pulsed-magnetic field as part of their user program. The significant progress made with our technology is expected to impact important problems in materials physics. Collaborations with LANL, ANL, BNL and ORNL formed a significant portion of the scientific work. Numerous scientific investigations associated with this grant have already appeared in the archival literature, or have been submitted. Some other work is still in progress, and will be the subject of future grant proposals and publications.

  17. Low larval densities in northern populations reinforce range expansion by a Mediterranean damselfly

    DEFF Research Database (Denmark)

    Therry, Lieven; Swaegers, Janne; Dinh, Khuong Van

    2016-01-01

    towards the very edge of the expansion front has been neglected. Density effects may, however, have a profound direct impact on traits involved in range expansion and influence range dynamics. 2. In this study, we contrast the effects of high conspecific larval density typical for established populations......1. Contemporary climate change triggers a poleward range shift in many species. A growing number of studies document evolutionary changes in traits accelerating range expansion (such as growth rate and dispersal-related traits). In contrast, the direct impact of decreasing conspecific densities...... and low larval density typical for newly founded populations at the edge of the expansion front on a set of larval traits that may affect the range dynamics in the poleward moving damselfly Coenagrion scitulum. We therefore ran an outdoor mesocosm experiment with a low- and high-density treatment close...

  18. Ground penetrating radar antenna measurements based on plane-wave expansions

    DEFF Research Database (Denmark)

    Lenler-Eriksen, Hans-Rudolph; Meincke, Peter

    2005-01-01

    The plane-wave transmitting spectrum of the system consisting of the ground penetrating radar (GPR) antenna and the air-soil interface is measured using a loop buried in the soil. The plane-wave spectrum is used to determine various parameters characterizing the radiation of the GPR antenna...

  19. Expansion of the Variational Garrote to a Multiple Measurement Vectors Model

    DEFF Research Database (Denmark)

    Hansen, Sofie Therese; Stahlhut, Carsten; Hansen, Lars Kai

    2013-01-01

    The recovery of sparse signals in underdetermined systems is the focus of this paper. We propose an expanded version of the Variational Garrote, originally presented by Kappen (2011), which can use multiple measurement vectors (MMVs) to further improve source retrieval performance. We show its...

  20. Relativistic rise measurement by cluster counting method in time expansion chamber

    International Nuclear Information System (INIS)

    Rehak, P.; Walenta, A.H.

    1979-10-01

    A new approach to the measurement of the ionization energy loss for the charged particle identification in the region of the relativistic rise was tested experimentally. The method consists of determining in a special drift chamber (TEC) the number of clusters of the primary ionization. The method gives almost the full relativistic rise and narrower landau distribution. The consequences for a practical detector are discussed

  1. Mobile Launch Platform Vehicle Assembly Area (SWMU 056) Biosparge Expansion Interim Measures Work Plan

    Science.gov (United States)

    Burcham, Michael S.; Daprato, Rebecca C.

    2016-01-01

    This document presents the design details for an Interim Measure (IM) Work Plan (IMWP) for the Mobile Launch Platform/Vehicle Assembly Building (MLPV) Area, located at the John F. Kennedy Space Center (KSC), Florida. The MLPV Area has been designated Solid Waste Management Unit Number 056 (SWMU 056) under KSC's Resource Conservation and Recovery Act (RCRA) Corrective Action Program. This report was prepared by Geosyntec Consultants (Geosyntec) for the National Aeronautics and Space Administration (NASA) under contract number NNK09CA02B and NNK12CA13B, project control number ENV1642. The Advanced Data Package (ADP) presentation covering the elements of this IMWP report received KSC Remediation Team (KSCRT) approval at the December 2015 Team Meeting; the meeting minutes are included in Appendix A.

  2. Correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise.

    Science.gov (United States)

    Yoon, Jung-Gyu

    2018-01-01

    [Purpose] The purpose of this study was to examine correlations between measurement time and different expansibility of the elastic tape on the rectus femoris and body sway index with plyometric exercise. [Subjects and Methods] The subjects of this study were 24 healthy men. C90 area, C90 angle, trace length, sway average velocity for body sway index were measured using a force plate by BT4. The collected data were analyzed using Kendall's coefficient of concordance. [Results] All of body sway index on measuring follow up 24 hours after removing tape were significantly decreased than before and right after plyometric exercise. No significant correlations were found between body sway index and different expansibility of the elastic tape. [Conclusion] It appears that different expansibility of the elastic tape does not affect the ability to body sway index. Carry over effect of taping was verified on measuring follow up 24 hours after removing tape through the decreasing body sway index.

  3. A New Measurement of the Expansion Rate of the Universe, Evidence of New Physics?

    Science.gov (United States)

    Riess, Adam

    2018-01-01

    The Hubble constant remains one of the most important parameters in the cosmological model, setting the size and age scales of the Universe. Present uncertainties in the cosmological model including the nature of dark energy, the properties of neutrinos and the scale of departures from flat geometry can be constrained by measurements of the Hubble constant made to higher precision than was possible with the first generations of Hubble Telescope instruments. A streamlined distance ladder constructed from infrared observations of Cepheids and type Ia supernovae with ruthless attention paid to systematics now provide 2.4% precision and offer the means to do even better. By steadily improving the precision and accuracy of the Hubble constant, we now see evidence for significant deviations from the standard model, referred to as LambdaCDM, and thus the exciting chance, if true, of discovering new fundamental physics such as exotic dark energy, a new relativistic particle, or a small curvature to name a few possibilities. I will review recent and expected progress in the near term.

  4. Neutrinos in the holographic dark energy model: constraints from latest measurements of expansion history and growth of structure

    International Nuclear Information System (INIS)

    Zhang, Jing-Fei; Zhao, Ming-Ming; Li, Yun-He; Zhang, Xin

    2015-01-01

    The model of holographic dark energy (HDE) with massive neutrinos and/or dark radiation is investigated in detail. The background and perturbation evolutions in the HDE model are calculated. We employ the PPF approach to overcome the gravity instability difficulty (perturbation divergence of dark energy) led by the equation-of-state parameter w evolving across the phantom divide w=−1 in the HDE model with c<1. We thus derive the evolutions of density perturbations of various components and metric fluctuations in the HDE model. The impacts of massive neutrino and dark radiation on the CMB anisotropy power spectrum and the matter power spectrum in the HDE scenario are discussed. Furthermore, we constrain the models of HDE with massive neutrinos and/or dark radiation by using the latest measurements of expansion history and growth of structure, including the Planck CMB temperature data, the baryon acoustic oscillation data, the JLA supernova data, the Hubble constant direct measurement, the cosmic shear data of weak lensing, the Planck CMB lensing data, and the redshift space distortions data. We find that ∑ m ν <0.186 eV (95% CL) and N eff =3.75 +0.28 −0.32 in the HDE model from the constraints of these data

  5. On the pattern of CO2 radiative forcing and poleward energy transport

    Science.gov (United States)

    Huang, Yi; Xia, Yan; Tan, Xiaoxiao

    2017-10-01

    A set of general circulation model experiments are conducted to analyze how the poleward energy transport (PET) is related to the spatial pattern of CO2 radiative forcing. The effects of forcing pattern are affirmed by comparing the conventional doubling CO2 experiment, in which the forcing pattern is inhomogeneous, to a set of forcing homogenization experiments, in which the top of atmosphere (TOA), surface, or atmospheric forcing distribution is homogenized respectively. In addition, we separate and compare the effects of CO2 forcing to various feedbacks on atmospheric and oceanic PETs, by using a set of radiative kernels that we have developed for both TOA and surface radiation fluxes. The results here show that both the enhancement of atmospheric PET and weakening of oceanic PET during global warming are directly driven by the meridional gradients of the CO2 forcing. Interestingly, the overall feedback effect is to reinforce the forcing effect, mainly through the cloud feedback in the case of atmospheric PET and the albedo feedback in the case of the oceanic PET. Contrary to previous studies, we find that the water vapor feedback only has a weak effect on atmospheric PET. The Arctic warming amplification, which strongly affects atmospheric PET, is sensitive to the CO2 forcing pattern.

  6. Comparison of volume and diameter measurement in assessing small abdominal aortic aneurysm expansion examined using computed tomographic angiography

    International Nuclear Information System (INIS)

    Parr, Adam; Jayaratne, Chanaka; Buttner, Petra; Golledge, Jonathan

    2011-01-01

    Aim: First we aimed to assess the reproducibility of a computer tomography angiography (CTA) based technique for measuring infra-renal aortic volume and diameter. Second we sought to investigate whether changes in aortic volume and diameter were similar during follow-up. Materials and methods: A prospective series of 57 patients, with aortic diameter initially measuring between 25 and 55 mm, were assessed with 2 CTAs a median of 14 months apart. Aortic volume and maximum diameter (both axial and orthogonal) were measured by a semi-automated workstation protocol based on previously defined techniques. Intra- and inter-observer reproducibility were assessed by repeat assessment of the initial CTA images of the first 33 patients included in the study, in order to estimate the 95% limits of agreements. Changes in aortic dimensions between the first and follow-up CTA, were defined for volume and diameter separately as changes greater than their respective 95% limits of agreement. Results: Reproducibility of aortic volume and diameter was excellent with an average coefficient of variation 3 (0.01-14.18), 1.2 mm (0.40-3.50) and 1.4 mm (-0.15 to 3.55) respectively. Forty-two percent of patients who had increased aortic volume above the 95% limit of agreement did not display corresponding axial or orthogonal diameter changes. Conclusions: Infra-renal total aortic volume, axial and orthogonal diameter can all be measured reproducibly from CTA. Aortic volume changes are not always reflected by similar changes in diameter and therefore provide complementary information when assessing AAA expansion over time.

  7. Topographic imaging and velocity measurements of surface expansion during laser ablation of a metal layer on glass

    Science.gov (United States)

    Rodriguez, G.; Valenzuela, A. R.; Clarke, S. A.; Thomas, K. A.

    2006-05-01

    We report on the development of novel high-speed techniques to measure the surface topography and instantaneous velocity of ablatively launched thin metal layers with sub-nanosecond temporal resolution. Applications for laser detonator technology require the understanding of laser fiber optical energy deposition and ablative launch of a thin metal layer into an explosive. Characterization of the ablation process requires a time-resolved diagnosis of the ejected material state (topography, velocity, density, pressure, etc.). A pulsed Nd:YAG fibercoupled laser is used to ablate a 250 nm layer of titanium deposited on a 500 μm thick fused silica substrate at fluences below 10 J/cm2. Time-resolved imaging of the free expansion of the metal surface is accomplished with Fourier plane imaging using a Shack-Hartmann lenticular array coupled to a fast framing camera. The imager performs topographical surface measurements by detecting changes in the optical wavefront of a reflected picosecond probe laser beam off the expanding surface. Consequently, single-event sub-nanosecond time-resolved "movies" of surface motion dynamics are captured. Crosscheck of the Shack-Hartmann imager is done using advanced velocimetry. A 1550 nm heterodyne laser-based Photonic Doppler Velocimeter is used to measure surface velocity. Using a 1550 nm single mode fiber laser, 10 GHz InGaAs detectors and telecom hardware, we directly record the resulting beat signal produced by the accelerated surface onto a fast digitizer. Free surface velocities as high as 6.5 μm/ns are recorded. Comparisons between the dynamic topography, surface velocimetry and laser hydrocode simulations are presented.

  8. Influence of thermal expansion mismatch on residual stress profile in veneering ceramic layered on zirconia: Measurement by hole-drilling.

    Science.gov (United States)

    Mainjot, Amélie K; Najjar, Achref; Jakubowicz-Kohen, Boris D; Sadoun, Michaël J

    2015-09-01

    Mismatch in thermal expansion coefficient between core and veneering ceramic (Δα=αcore-αveneer, ppm/°C) is reported as a crucial parameter influencing veneer fractures with Yttria-tetragonal-zirconia-polycrystal (Y-TZP) prostheses, which still constitutes a misunderstood problem. However, the common positive Δα concept remains empirical. The objective of this study is to investigate the Δα dependence of residual stress profiles in veneering ceramic layered on Y-TZP frameworks. The stress profile was measured with the hole-drilling method in bilayered disc samples of 20mm diameter with a 0.7mm thick Y-TZP framework and a 1.5mm thick veneer layer. 3 commercial and 4 experimental veneering ceramics (n=3 per group) were used to obtain different Δα varying from -1.3ppm/°C to +3.2ppm/°C, which were determined by dilatometric analyses. Veneer fractures were observed in samples with Δα≥+2.3 or ≤-0.3ppm/°C. Residual stress profiles measured in other groups showed compressive stresses in the surface, these stresses decreasing with depth and then becoming more compressive again near the interface. Small Δα variations were shown to induce significant changes in residual stress profiles. Compressive stress near the framework was found to decrease inversely to Δα. Veneer CTE close to Y-TZP (+0.2ppm/°C Δα) gived the most favorable stress profile. Yet, near the framework, Δα-induced residual stress varied inversely to predictions. This could be explained by the hypothesis of structural changes occurrence within the Y-TZP surface. Consequently, the optimum Δα value cannot be determined before understanding Y-TZP's particular behavior when veneered. Copyright © 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  9. Climate change alters the structure of arctic marine food webs due to poleward shifts of boreal generalists

    Science.gov (United States)

    Kortsch, Susanne; Primicerio, Raul; Fossheim, Maria; Dolgov, Andrey V.; Aschan, Michaela

    2015-01-01

    Climate-driven poleward shifts, leading to changes in species composition and relative abundances, have been recently documented in the Arctic. Among the fastest moving species are boreal generalist fish which are expected to affect arctic marine food web structure and ecosystem functioning substantially. Here, we address structural changes at the food web level induced by poleward shifts via topological network analysis of highly resolved boreal and arctic food webs of the Barents Sea. We detected considerable differences in structural properties and link configuration between the boreal and the arctic food webs, the latter being more modular and less connected. We found that a main characteristic of the boreal fish moving poleward into the arctic region of the Barents Sea is high generalism, a property that increases connectance and reduces modularity in the arctic marine food web. Our results reveal that habitats form natural boundaries for food web modules, and that generalists play an important functional role in coupling pelagic and benthic modules. We posit that these habitat couplers have the potential to promote the transfer of energy and matter between habitats, but also the spread of pertubations, thereby changing arctic marine food web structure considerably with implications for ecosystem dynamics and functioning. PMID:26336179

  10. Climate change alters the structure of arctic marine food webs due to poleward shifts of boreal generalists.

    Science.gov (United States)

    Kortsch, Susanne; Primicerio, Raul; Fossheim, Maria; Dolgov, Andrey V; Aschan, Michaela

    2015-09-07

    Climate-driven poleward shifts, leading to changes in species composition and relative abundances, have been recently documented in the Arctic. Among the fastest moving species are boreal generalist fish which are expected to affect arctic marine food web structure and ecosystem functioning substantially. Here, we address structural changes at the food web level induced by poleward shifts via topological network analysis of highly resolved boreal and arctic food webs of the Barents Sea. We detected considerable differences in structural properties and link configuration between the boreal and the arctic food webs, the latter being more modular and less connected. We found that a main characteristic of the boreal fish moving poleward into the arctic region of the Barents Sea is high generalism, a property that increases connectance and reduces modularity in the arctic marine food web. Our results reveal that habitats form natural boundaries for food web modules, and that generalists play an important functional role in coupling pelagic and benthic modules. We posit that these habitat couplers have the potential to promote the transfer of energy and matter between habitats, but also the spread of pertubations, thereby changing arctic marine food web structure considerably with implications for ecosystem dynamics and functioning. © 2015 The Authors.

  11. Dynamic habitat suitability modelling reveals rapid poleward distribution shift in a mobile apex predator.

    Science.gov (United States)

    Hill, Nicholas J; Tobin, Andrew J; Reside, April E; Pepperell, Julian G; Bridge, Tom C L

    2016-03-01

    Many taxa are undergoing distribution shifts in response to anthropogenic climate change. However, detecting a climate signal in mobile species is difficult due to their wide-ranging, patchy distributions, often driven by natural climate variability. For example, difficulties associated with assessing pelagic fish distributions have rendered fisheries management ill-equipped to adapt to the challenges posed by climate change, leaving pelagic species and ecosystems vulnerable. Here, we demonstrate the value of citizen science data for modelling the dynamic habitat suitability of a mobile pelagic predator (black marlin, Istiompax indica) within the south-west Pacific Ocean. The extensive spatial and temporal coverage of our occurrence data set (n = 18 717), collected at high resolution (~1.85 km(2) ), enabled identification of suitable habitat at monthly time steps over a 16-year period (1998-2013). We identified considerable monthly, seasonal and interannual variability in the extent and distribution of suitable habitat, predominately driven by chlorophyll a and sea surface height. Interannual variability correlated with El Nino Southern Oscillation (ENSO) events, with suitable habitat extending up to ~300 km further south during La Nina events. Despite the strong influence of ENSO, our model revealed a rapid poleward shift in the geometric mean of black marlin habitat, occurring at 88.2 km decade(-1) . By incorporating multiple environmental factors at monthly time steps, we were able to demonstrate a rapid distribution shift in a mobile pelagic species. Our findings suggest that the rapid velocity of climate change in the south-west Pacific Ocean is likely affecting mobile pelagic species, indicating that they may be more vulnerable to climate change than previously thought. © 2015 John Wiley & Sons Ltd.

  12. X-ray diffraction measurement of the linear thermal expansion coefficients of WCoB in the range 300 to 973 K

    International Nuclear Information System (INIS)

    Petrov, K.; Will, G.

    1981-01-01

    High-temperature treatment of tungsten carbide-cobalt hard alloys in TiB 2 media leads to the formation of a surface diffusion coating which contains orthorhombic WCoB. The function of this compound in enhancing wear resistance of cutting tools, is discussed. The thermal expansion of WCoB is of primary interest, since the wear resistance of the coating reflects the degree of matching of the thermal expansion coefficients of the different phases. Preparation of the samples is described and experimental details of the X-ray diffraction measurements are given. The temperature dependence of the lattice parameters for the range 300 to 973 K, and the corresponding linear thermal expansion coefficients along the three principal crystallographic directions, are given. The results are discussed in terms of the bonding features of the solid. (U.K.)

  13. Glass-Transition Temperature Profile Measured in a Wood Cell Wall Using Scanning Thermal Expansion Microscope (SThEM)

    Science.gov (United States)

    Antoniow, J. S.; Maigret, J.-E.; Jensen, C.; Trannoy, N.; Chirtoc, M.; Beaugrand, J.

    2012-11-01

    This study aims to assess the in situ spatial distribution of glass-transition temperatures ( T g) of the main lignocellulosic biopolymers of plant cell walls. Studies are conducted using scanning thermal expansion microscopy to analyze the cross-section of the cell wall of poplar. The surface topography is mapped over a range of probe-tip temperatures to capture the change of thermal expansion on the sample surface versus temperature. For different temperature values chosen between 20 °C and 250 °C, several quantitative mappings were made to show the spatial variation of the thermal expansion. As the glass transition affects the thermal expansion coefficient and elastic modulus considerably, the same data line of each topography image was extracted to identify specific thermal events in their topographic evolution as a function of temperature. In particular, it is shown that the thermal expansion of the contact surface is not uniform across the cell wall and a profile of the glass-transition temperature could thus be evidenced and quantified corresponding to the mobility of lignocellulosic polymers having a role in the organization of the cell wall structures.

  14. In-situ Density and Thermal Expansion Measurements of Fe and Fe-S Alloying Liquids Under Planetary Core Conditions

    Science.gov (United States)

    Jing, Z.; Chantel, J.; Yu, T.; Sakamaki, T.; Wang, Y.

    2015-12-01

    Liquid iron is likely the dominant constituent in the cores of terrestrial planets and icy satellites such as Earth, Mars, Mercury, the Moon, Ganymede, and Io. Suggested by geophysical and geochemical observations, light elements such as S, C, Si, etc., are likely present in planetary cores. These light elements can significantly reduce the density and melting temperature of the Fe cores, and hence their abundances are crucial to our understanding of the structure and thermal history of planetary cores, as well as the generation of intrinsic magnetic fields. Knowledge on the density of Fe-light element alloying liquids at high pressures is critical to place constraints on the composition of planetary cores. However, density data on liquid Fe-light element alloys at core pressures are very limited in pressure and composition and are sometimes controversial. In this study, we extend the density dataset for Fe-rich liquids by measuring the density of Fe, Fe-10wt%S, Fe-20wt%S, Fe-27wt%S, and FeS liquids using the X-ray absorption technique in a DIA-type multianvil apparatus up to 7 GPa and 2173 K. An ion chamber (1D-detector) and a CCD camera (2D-detector) were used to measure intensities of transmitted monochromatic X-rays through molten samples, with the photon energy optimized at 40 keV. The densities were then determined from the Beer-Lambert law using the mass absorption coefficients, calibrated by solid standards using X-ray diffraction. At each pressure, density measurements were conducted at a range of temperatures above the liquidus of the samples, enabling the determination of thermal expansion. Combined with our previous results on the sound velocity of Fe and Fe-S liquids at high pressures (Jing et al., 2014, Earth Planet. Sci. Lett. 396, 78-87), these data provide tight constraints on the equation of state and thermodynamic properties such as the adiabatic temperature gradient for Fe-S liquids. We will discuss these results with implications to planetary

  15. A IR-Femtosecond Laser Hybrid Sensor to Measure the Thermal Expansion and Thermo-Optical Coefficient of Silica-Based FBG at High Temperatures.

    Science.gov (United States)

    Li, Litong; Lv, Dajuan; Yang, Minghong; Xiong, Liangming; Luo, Jie

    2018-01-26

    In this paper, a hybrid sensor was fabricated using a IR-femtosecond laser to measure the thermal expansion and thermo-optical coefficient of silica-based fiber Bragg gratings (FBGs). The hybrid sensor was composed of an inline fiber Fabry-Perot interferometer (FFPI) cavity and a type-II FBG. Experiment results showed that the type-II FBG had three high reflectivity resonances in the wavelength ranging from 1100 to 1600 nm, showing the peaks in 1.1, 1.3 and 1.5 μm, respectively. The thermal expansion and thermo-optical coefficient (1.3 μm, 1.5 μm) of silica-based FBG, under temperatures ranging from 30 to 1100 °C, had been simultaneously calculated by measuring the wavelength of the type-II FBG and FFPI cavity length.

  16. Body size, growth and life span: implications for the polewards range shift of Octopus tetricus in south-eastern Australia.

    Directory of Open Access Journals (Sweden)

    Jorge E Ramos

    Full Text Available Understanding the response of any species to climate change can be challenging. However, in short-lived species the faster turnover of generations may facilitate the examination of responses associated with longer-term environmental change. Octopus tetricus, a commercially important species, has undergone a recent polewards range shift in the coastal waters of south-eastern Australia, thought to be associated with the southerly extension of the warm East Australian Current. At the cooler temperatures of a polewards distribution limit, growth of a species could be slower, potentially leading to a bigger body size and resulting in a slower population turnover, affecting population viability at the extreme of the distribution. Growth rates, body size, and life span of O. tetricus were examined at the leading edge of a polewards range shift in Tasmanian waters (40°S and 147°E throughout 2011. Octopus tetricus had a relatively small body size and short lifespan of approximately 11 months that, despite cooler temperatures, would allow a high rate of population turnover and may facilitate the population increase necessary for successful establishment in the new extended area of the range. Temperature, food availability and gender appear to influence growth rate. Individuals that hatched during cooler and more productive conditions, but grew during warming conditions, exhibited faster growth rates and reached smaller body sizes than individuals that hatched into warmer waters but grew during cooling conditions. This study suggests that fast growth, small body size and associated rapid population turnover may facilitate the range shift of O. tetricus into Tasmanian waters.

  17. Body size, growth and life span: implications for the polewards range shift of Octopus tetricus in south-eastern Australia.

    Science.gov (United States)

    Ramos, Jorge E; Pecl, Gretta T; Moltschaniwskyj, Natalie A; Strugnell, Jan M; León, Rafael I; Semmens, Jayson M

    2014-01-01

    Understanding the response of any species to climate change can be challenging. However, in short-lived species the faster turnover of generations may facilitate the examination of responses associated with longer-term environmental change. Octopus tetricus, a commercially important species, has undergone a recent polewards range shift in the coastal waters of south-eastern Australia, thought to be associated with the southerly extension of the warm East Australian Current. At the cooler temperatures of a polewards distribution limit, growth of a species could be slower, potentially leading to a bigger body size and resulting in a slower population turnover, affecting population viability at the extreme of the distribution. Growth rates, body size, and life span of O. tetricus were examined at the leading edge of a polewards range shift in Tasmanian waters (40°S and 147°E) throughout 2011. Octopus tetricus had a relatively small body size and short lifespan of approximately 11 months that, despite cooler temperatures, would allow a high rate of population turnover and may facilitate the population increase necessary for successful establishment in the new extended area of the range. Temperature, food availability and gender appear to influence growth rate. Individuals that hatched during cooler and more productive conditions, but grew during warming conditions, exhibited faster growth rates and reached smaller body sizes than individuals that hatched into warmer waters but grew during cooling conditions. This study suggests that fast growth, small body size and associated rapid population turnover may facilitate the range shift of O. tetricus into Tasmanian waters.

  18. Measurements of density and of thermal expansion coefficient of sodium tetraborate (borax)-UO2 and of sodium metaborate-UO2 solutions

    International Nuclear Information System (INIS)

    Dalle Donne, M.; Dorner, S.

    1980-12-01

    Measurements have been performed of the density and volumetric thermal expansion coefficient of liquid sodium tetraborate (borax) and of sodium metaborate both pure and with two different amounts of UO 2 dissolved in each. These data are required for the design of core-catchers based on sodium borates. The measurements have been performed with the buoyancy method in the temperature range from 850 0 C to 1325 0 C. The data for the pure borax and for the sodium metaborate agree reasonably well with the data from the literature, giving confidence that the measurements are correct and the new data for the salts with UO 2 are reliable. (orig.) [de

  19. Expansion dynamics

    International Nuclear Information System (INIS)

    Knoll, J.

    1985-10-01

    A quantum dynamical model is suggested which describes the expansion and disassembly phase of highly excited compounds formed in energetic heavy-ion collisions. First applications in two space and one time dimensional model world are discussed and qualitatively compared to standard freeze-out concepts. (orig.)

  20. expansion method

    Indian Academy of Sciences (India)

    ... (G /G)-expansion method, here in the present work, we investigate five nonlinear equations of physical importance, namely the (2+1)-dimensional Maccari system, the Pochhammer–Chree equation, the Newell–. Whitehead equation, the Fitzhugh–Nagumo equation and the Burger–Fisher equation. The organization of the ...

  1. Relation of expansion due to alkali silica reaction to the degree of reaction measured by SEM image analysis

    International Nuclear Information System (INIS)

    Haha, M. Ben; Gallucci, E.; Guidoum, A.; Scrivener, K.L.

    2007-01-01

    Scanning Electron Microscopy Image Analysis (SEM-IA) was used to quantify the degree of alkali silica reaction in affected microbars, mortar and concrete prisms. It was found that the degree of reaction gave a unique correlation with the macroscopic expansion for three different aggregates, stored at three temperatures and with two levels of alkali. The relationships found for the concretes and the mortars overlap when normalised by the aggregate content. This relationship seems to be linear up to a critical reaction degree which coincides with crack initiation within the reactive aggregates

  2. Measurement method of compressibility and thermal expansion coefficients for density standard liquid at 2329 kg/m3 based on hydrostatic suspension principle

    Science.gov (United States)

    Wang, Jintao; Liu, Ziyong; Xu, Changhong; Li, Zhanhong

    2014-07-01

    The accurate measurement on the compressibility and thermal expansion coefficients of density standard liquid at 2329kg/m3 (DSL-2329) plays an important role in the quality control for silicon single crystal manufacturing. A new method is developed based on hydrostatic suspension principle in order to determine the two coefficients with high measurement accuracy. Two silicon single crystal samples with known density are immersed into a sealed vessel full of DSL-2329. The density of liquid is adjusted with varying liquid temperature and static pressure, so that the hydrostatic suspension of two silicon single crystal samples is achieved. The compression and thermal expansion coefficients are then calculated by using the data of temperature and static pressure at the suspension state. One silicon single crystal sample can be suspended at different state, as long as the liquid temperature and static pressure function linearly according to a certain mathematical relationship. A hydrostatic suspension experimental system is devised with the maximal temperature control error ±50 μK; Silicon single crystal samples can be suspended by adapting the pressure following the PID method. By using the method based on hydrostatic suspension principle, the two key coefficients can be measured at the same time, and measurement precision can be improved due to avoiding the influence of liquid surface tension. This method was further validated experimentally, where the mixture of 1, 2, 3-tribromopropane and 1,2-dibromoethane is used as DSL-2329. The compressibility and thermal expansion coefficients were measured, as 8.5×10-4 K-1 and 5.4×1010 Pa-1, respectively.

  3. A direct estimate of poleward volume, heat and fresh water flux at 59.5°N between Greenland and Scotland

    Science.gov (United States)

    Rossby, Thomas; Reverdin, Gilles; Chafik, Leon; Søiland, Henrik

    2017-04-01

    The meridional overturning circulation (MOC) in the North Atlantic plays a major role in the transport of heat from low latitudes to high. In this study we combine recent measurements of currents from the surface to >700 m from a shipboard acoustic Doppler current profiler on the Nuka Arctica, a freighter in regular service between Greenland and Denmark with Argo profiles (to 2000 m) to estimate poleward volume, heat and freshwater flux at 59.5°N between Greenland and Scotland. For the period late 2012 to early 2016 the de-seasoned mean meridional overturning circulation reaches a 14.9±1.7 Sv maximum at the σθ = 27.55 kg m-3 isopycnal, which varies in depth from near the surface in the western Irminger Sea to 1000 m in Rockall Trough. The surface to bottom transport has a -0.44 Sv (southward) residual, which is not significantly different from zero. The total heat and fresh water fluxes across 59.5°N = 307 PW and 0.15 Sv, both with a 12% uncertainty principally due to uncertainties of the MOC. Comparing this ADCP dataset with an earlier one of comparable size from 1999-2002 (to 400 m depth only) shows strikingly similar transports in both west and east of the Reykjanes Ridge suggesting at least for these two periods 13 years apart very little difference in the strength of the MOC.

  4. A direct estimate of poleward volume, heat, and freshwater fluxes at 59.5°N between Greenland and Scotland

    Science.gov (United States)

    Rossby, T.; Reverdin, Gilles; Chafik, Leon; Søiland, Henrik

    2017-07-01

    The meridional overturning circulation (MOC) in the North Atlantic plays a major role in the transport of heat from low to high latitudes. In this study, we combine recent measurements of currents from the surface to >700 m from a shipboard acoustic Doppler current profiler with Argo profiles (to 2000 m) to estimate poleward volume, heat, and freshwater flux at 59.5°N between Greenland and Scotland. This is made possible thanks to the vessel Nuka Arctica that operates on a 3 week schedule between Greenland and Denmark. For the period late 2012 to early 2016, the deseasoned mean meridional overturning circulation reaches a 18.4 ± 3.4 Sv maximum at the σθ = 27.55 kg m-3 isopycnal, which varies in depth from near the surface in the western Irminger Sea to 1000 m in Rockall Trough. The total heat and freshwater fluxes across 59.5°N = 399 ± 74 TW and -0.20 ± 0.04 Sv, where the uncertainties are principally due to that of the MOC. Analysis of altimetric sea surface height variations along exactly the same route reveals a somewhat stronger geostrophic flow north during this period compared to the 23 year mean suggesting that for a long-term mean the above flux estimates should be reduced slightly to 17.4 Sv, 377 TW, and -0.19 Sv, respectively, with the same estimate uncertainties. The ADCP program is ongoing.

  5. Measurements of thermal conductivity and the coefficient of thermal expansion for polysilicon thin films by using double-clamped beams

    Science.gov (United States)

    Liu, Haiyun; Wang, Lei

    2018-01-01

    In this paper, a test structure for simultaneously determining thermal conductivity and the coefficient of thermal expansion (CTE) of polysilicon thin film is proposed. The test structure consists of two double-clamped beams with different lengths. A theoretical model for extracting thermal conductivity and CTE based on electrothermal analysis and resonance frequency approach is developed. Both flat and buckled beams are considered in the theoretical model. The model is confirmed by finite element software ANSYS. The test structures are fabricated by surface micromachined fabrication process. Experiments are carried out in our atmosphere. Thermal conductivity and CTE of polysilicon thin film are obtained to be (29.96  ±  0.92) W · m · K-1 and (2.65  ±  0.03)  ×  10-6 K-1, respectively, with temperature ranging from 300-400 K.

  6. Heating rate measurements over 30 deg and 40 deg (half angle) blunt cones in air and helium in the Langley expansion tube facility

    Science.gov (United States)

    Reddy, N. M.

    1980-01-01

    Convective heat transfer measurements, made on the conical portion of spherically blunted cones (30 deg and 40 deg half angle) in an expansion tube are discussed. The test gases used were helium and air; flow velocities were about 6.8 km/sec for helium and about 5.1 km/sec for air. The measured heating rates are compared with calculated results using a viscous shock layer computer code. For air, various techniques to determine flow velocity yielded identical results, but for helium, the flow velocity varied by as much as eight percent depending on which technique was used. The measured heating rates are in satisfactory agreement with calculation for helium, assuming the lower flow velocity, the measurements are significantly greater than theory and the discrepancy increased with increasing distance along the cone.

  7. Thermal expansion of beryllium oxide

    International Nuclear Information System (INIS)

    Solodukhin, A.V.; Kruzhalov, A.V.; Mazurenko, V.G.; Maslov, V.A.; Medvedev, V.A.; Polupanova, T.I.

    1987-01-01

    Precise measurements of temperature dependence of the coefficient of linear expansion in the 22-320 K temperature range on beryllium oxide monocrystals are conducted. A model of thermal expansion is suggested; the range of temperature dependence minimum of the coefficient of thermal expansion is well described within the frames of this model. The results of the experiment may be used for investigation of thermal stresses in crystals

  8. Structure of the poleward wall of the trough and the inclination of the geomagnetic field above the EISCAT radar

    Directory of Open Access Journals (Sweden)

    D. G. Jones

    Full Text Available A special high-resolution routine of the EISCAT radar has been used to investigate the structure and development of the poleward wall of a deep trough in electron density. The feature was tracked by the radar during a 7-hour period under very quiet geomagnetic conditions. The field-aligned nature of the structure enabled an estimate to be made of the inclination of the geomagnetic field above EISCAT that was in good agreement with the current model. Observations of narrow field-aligned enhancements in electron temperature demonstrated that the wall of this trough is a dynamic feature, reforming regularly as the electron density responds on a time scale of tens of minutes to energy input from soft-particle precipitation.

  9. Structure of the poleward wall of the trough and the inclination of the geomagnetic field above the EISCAT radar

    Directory of Open Access Journals (Sweden)

    D. G. Jones

    1997-06-01

    Full Text Available A special high-resolution routine of the EISCAT radar has been used to investigate the structure and development of the poleward wall of a deep trough in electron density. The feature was tracked by the radar during a 7-hour period under very quiet geomagnetic conditions. The field-aligned nature of the structure enabled an estimate to be made of the inclination of the geomagnetic field above EISCAT that was in good agreement with the current model. Observations of narrow field-aligned enhancements in electron temperature demonstrated that the wall of this trough is a dynamic feature, reforming regularly as the electron density responds on a time scale of tens of minutes to energy input from soft-particle precipitation.

  10. The future demographic niche of a declining grassland bird fails to shift poleward in response to climate change

    Science.gov (United States)

    McCauley, Lisa A.; Ribic, Christine; Pomara, Lars Y.; Zuckerberg, Benjamin

    2017-01-01

    ContextTemperate grasslands and their dependent species are exposed to high variability in weather and climate due to the lack of natural buffers such as forests. Grassland birds are particularly vulnerable to this variability, yet have failed to shift poleward in response to recent climate change like other bird species in North America. However, there have been few studies examining the effect of weather on grassland bird demography and consequent influence of climate change on population persistence and distributional shifts.ObjectivesThe goal of this study was to estimate the vulnerability of Henslow’s Sparrow (Ammodramus henslowii), an obligate grassland bird that has been declining throughout much of its range, to past and future climatic variability.MethodsWe conducted a demographic meta-analysis from published studies and quantified the relationship between nest success rates and variability in breeding season climate. We projected the climate-demography relationships spatially, throughout the breeding range, and temporally, from 1981 to 2050. These projections were used to evaluate population dynamics by implementing a spatially explicit population model.ResultsWe uncovered a climate-demography linkage for Henslow’s Sparrow with summer precipitation, and to a lesser degree, temperature positively affecting nest success. We found that future climatic conditions—primarily changes in precipitation—will likely contribute to reduced population persistence and a southwestward range contraction.ConclusionsFuture distributional shifts in response to climate change may not always be poleward and assessing projected changes in precipitation is critical for grassland bird conservation and climate change adaptation.

  11. PROBING THE EXPANSION HISTORY OF THE UNIVERSE BY MODEL-INDEPENDENT RECONSTRUCTION FROM SUPERNOVAE AND GAMMA-RAY BURST MEASUREMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Chao-Jun; Li, Xin-Zhou, E-mail: fengcj@shnu.edu.cn, E-mail: kychz@shnu.edu.cn [Shanghai United Center for Astrophysics (SUCA), Shanghai Normal University, 100 Guilin Road, Shanghai 200234 (China)

    2016-04-10

    To probe the late evolution history of the universe, we adopt two kinds of optimal basis systems. One of them is constructed by performing the principle component analysis, and the other is built by taking the multidimensional scaling approach. Cosmological observables such as the luminosity distance can be decomposed into these basis systems. These basis systems are optimized for different kinds of cosmological models that are based on different physical assumptions, even for a mixture model of them. Therefore, the so-called feature space that is projected from the basis systems is cosmological model independent, and it provides a parameterization for studying and reconstructing the Hubble expansion rate from the supernova luminosity distance and even gamma-ray burst (GRB) data with self-calibration. The circular problem when using GRBs as cosmological candles is naturally eliminated in this procedure. By using the Levenberg–Marquardt technique and the Markov Chain Monte Carlo method, we perform an observational constraint on this kind of parameterization. The data we used include the “joint light-curve analysis” data set that consists of 740 Type Ia supernovae and 109 long GRBs with the well-known Amati relation.

  12. Permissible limit for mandibular expansion.

    Science.gov (United States)

    Motoyoshi, Mitsuru; Shirai, Sawa; Yano, Shinya; Nakanishi, Kotoe; Shimizu, Noriyoshi

    2005-04-01

    In recent years, mandibular expansion has been increasingly performed in conjunction with orthodontic treatment. Lateral tipping of the molars associated with mandibular expansion should, however, be considered, because excessive expansion may result in excessive buccal tooth inclination, which may disturb the occlusal relationship. This study was conducted to quantitatively clarify molar movement during mandibular expansion using the Schwarz appliance to determine the permissible limit of mandibular expansion as a clinical index for inclination movement. Inclinations in the masticatory surface of the first molar and intermolar width were measured before expansion (T1), after expansion (T2), and before edgewise treatment (T3). Lower plaster models from 29 subjects treated with expansion plates were used and compared with models from 11 control subjects with normal occlusion. The average treatment change (T1-T2) in intermolar width was 5.42 mm (standard deviation 1.98), and the average angle of buccal tooth inclination was 10.16 degrees (standard deviation 3.83). No significant correlation was found between age prior to treatment and the treatment period when they were compared with the intermolar width increments and inclination angles. There was a significant positive correlation between retention duration and the amount of expansion. The regression coefficient of the angle of buccal tooth inclination during expansion to the increment of the intermolar width was approximately 0.2. This means that 1 mm of expansion is accompanied by 5 degrees of molar lateral tipping. This coefficient is clinically useful for estimating the permissible limit for mandibular expansion.

  13. Linear thermal expansivity and Cp measurements for LuHx and LuDx (x=0.005 and 0.053) single crystals

    International Nuclear Information System (INIS)

    Swenson, C.A.

    1996-01-01

    Linear thermal expansivity (α) measurements from 1 to 300 K and heat capacity (C p ) measurements from 1 to 110 K are reported for single crystals of the α-Lu hexagonal alloys LuH x and LuD x (x=0.005 and 0.053). The C p data confirm and extend to 110 K earlier 1 to 20 K measurements on LuH x alloys, and show that isotope effects, if any, are small. The small x dependences of the C p close-quote s above 8 K can be associated with small increases in the Debye temperature Θ 0 . This latter interpretation, which is consistent with ultrasonic and other results for these alloys, is valid only if C p is expressed as mJ/gmolK (essentially, per mole of Lu ions). Results are in agreement with the previous conclusion from more extensive polycrystalline LuH x data that the shape of the low-temperature C p vs T relation for x≤0.015 is qualitatively different from that for x≥0.032. The linear thermal expansivities of the c-axis alloys, even for x=0.005, are significantly smaller (by from 3% to 20%) than those for the pure crystals, with large isotope effects and a large, nonlinear x dependence for the low-temperature expansivity data. Other types of data have shown a feature near 170 K which is associated with the completion of pairing of the hydrogens along the c axis in next-nearest-neighbor tetrahedral sites. A distinct (approximately 15 K wide) change in α which is observed near this temperature for each alloy, except for a-axis LuD 0.005 , provides the most direct evidence of such a transition. The temperature of the c-axis discontinuity is slightly isotope and x dependent, and scales approximately with x [+24% on warming for LuH(or D) 0.053 ]. (Abstract Truncated)

  14. T1 measurements identify extracellular volume expansion in hypertrophic cardiomyopathy sarcomere mutation carriers with and without left ventricular hypertrophy.

    Science.gov (United States)

    Ho, Carolyn Y; Abbasi, Siddique A; Neilan, Tomas G; Shah, Ravi V; Chen, Yucheng; Heydari, Bobak; Cirino, Allison L; Lakdawala, Neal K; Orav, E John; González, Arantxa; López, Begoña; Díez, Javier; Jerosch-Herold, Michael; Kwong, Raymond Y

    2013-05-01

    Myocardial fibrosis is a hallmark of hypertrophic cardiomyopathy (HCM) and a potential substrate for arrhythmias and heart failure. Sarcomere mutations seem to induce profibrotic changes before left ventricular hypertrophy (LVH) develops. To further evaluate these processes, we used cardiac magnetic resonance with T1 measurements on a genotyped HCM population to quantify myocardial extracellular volume (ECV). Sarcomere mutation carriers with LVH (G+/LVH+, n=37) and without LVH (G+/LVH-, n=29), patients with HCM without mutations (sarcomere-negative HCM, n=11), and healthy controls (n=11) underwent contrast cardiac magnetic resonance, measuring T1 times pre- and postgadolinium infusion. Concurrent echocardiography and serum biomarkers of collagen synthesis, hemodynamic stress, and myocardial injury were also available in a subset. Compared with controls, ECV was increased in patients with overt HCM, as well as G+/LVH- mutation carriers (ECV=0.36±0.01, 0.33±0.01, 0.27±0.01 in G+/LVH+, G+/LVH-, controls, respectively; P≤0.001 for all comparisons). ECV correlated with N-terminal probrain natriuretic peptide levels (r=0.58; P60% of overt patients with HCM but absent from G+/LVH- subjects. Both ECV and late gadolinium enhancement were more extensive in sarcomeric HCM than sarcomere-negative HCM. Myocardial ECV is increased in HCM sarcomere mutation carriers even in the absence of LVH. These data provide additional support that fibrotic remodeling is triggered early in disease pathogenesis. Quantifying ECV may help characterize the development of myocardial fibrosis in HCM and ultimately assist in developing novel disease-modifying therapy, targeting interstitial fibrosis.

  15. Isotropic Negative Thermal Expansion Metamaterials.

    Science.gov (United States)

    Wu, Lingling; Li, Bo; Zhou, Ji

    2016-07-13

    Negative thermal expansion materials are important and desirable in science and engineering applications. However, natural materials with isotropic negative thermal expansion are rare and usually unsatisfied in performance. Here, we propose a novel method to achieve two- and three-dimensional negative thermal expansion metamaterials via antichiral structures. The two-dimensional metamaterial is constructed with unit cells that combine bimaterial strips and antichiral structures, while the three-dimensional metamaterial is fabricated by a multimaterial 3D printing process. Both experimental and simulation results display isotropic negative thermal expansion property of the samples. The effective coefficient of negative thermal expansion of the proposed models is demonstrated to be dependent on the difference between the thermal expansion coefficient of the component materials, as well as on the circular node radius and the ligament length in the antichiral structures. The measured value of the linear negative thermal expansion coefficient of the three-dimensional sample is among the largest achieved in experiments to date. Our findings provide an easy and practical approach to obtaining materials with tunable negative thermal expansion on any scale.

  16. Effect of expansion chamber geometry on atomization and spray dispersion characters of a flashing mixture containing inerts. Part I. Numerical predictions and dual laser measurements.

    Science.gov (United States)

    Ju, Dehao; Shrimpton, John; Bowdrey, Moira; Hearn, Alex

    2012-08-01

    A cigarette alternative is designed to deliver a dose of medicinal nicotine within a timeframe comparable to that of a cigarette, and gives much of what smokers expect from a cigarette without the risks of smoking tobacco. The design concept is the same as a pressurized metered dose inhaler (pMDI), but is a breath actuated device (Oxette(®)). This work predicts the residual mass median diameter (MMD) of the spray issuing from early stage Oxette(®) prototypes by using an evaporation model of multi-component liquid droplets with the help of a numerical multi-component two-phase actuation model (developed by the authors) to quantify the sprays. Two different formulations with 95% and 98% mass fraction of HFA 134a, and two prototypes of cigarette alternatives with different expansion chamber volumes have been analyzed by the numerical model and compared with laser based measurements. The later designed device provides a larger expansion chamber volume to enhance the propellant evaporation, recirculation, bubble generation and growth inside the chamber, and it makes a significant improvement to produce finer sprays than the earlier design. The mass fraction of the formulation does not affect significantly on the initial MMD of the droplets near the discharge orifice. However, it influences the residual MMD at x=100mm from the discharge orifice, where the ratio of the predicted residual MMDs of the droplets generated by the formulations with 98% and 95% of HFA 134a is 0.73. Although the formulation with 98% of HFA 134a can generate smaller droplets, the formulation with 95% of HFA 134a produces more steady puffs with relatively low mass flow rate. Copyright © 2012 Elsevier B.V. All rights reserved.

  17. Plasma structure within poleward-moving cusp/cleft auroral transients: EISCAT Svalbard radar observations and an explanation in terms of large local time extent of events

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    Full Text Available We report high-resolution observations of the southward-IMF cusp/cleft ionosphere made on December 16th 1998 by the EISCAT (European incoherent scatter Svalbard radar (ESR, and compare them with observations of dayside auroral luminosity, as seen at a wavelength of 630 nm by a meridian scanning photometer at Ny Ålesund, and of plasma flows, as seen by the CUTLASS (co-operative UK twin location auroral sounding system Finland HF radar. The optical data reveal a series of poleward-moving transient red-line (630 nm enhancements, events that have been associated with bursts in the rate of magnetopause reconnection generating new open flux. The combined observations at this time have strong similarities to predictions of the effects of soft electron precipitation modulated by pulsed reconnection, as made by Davis and Lockwood (1996; however, the effects of rapid zonal flow in the ionosphere, caused by the magnetic curvature force on the newly opened field lines, are found to be a significant additional factor. In particular, it is shown how enhanced plasma loss rates induced by the rapid convection can explain two outstanding anomalies of the 630 nm transients, namely how minima in luminosity form between the poleward-moving events and how events can re-brighten as they move poleward. The observations show how cusp/cleft aurora and transient poleward-moving auroral forms appear in the ESR data and the conditions which cause enhanced 630 nm emission in the transients: they are an important first step in enabling the ESR to identify these features away from the winter solstice when supporting auroral observations are not available.

    Key words: Ionosphere (polar ionosphere - Magnetospheric physics (magnetopause; cusp and boundary layers; solar wind-magnetosphere interactions

  18. Plasma structure within poleward-moving cusp/cleft auroral transients: EISCAT Svalbard radar observations and an explanation in terms of large local time extent of events

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    2000-09-01

    Full Text Available We report high-resolution observations of the southward-IMF cusp/cleft ionosphere made on December 16th 1998 by the EISCAT (European incoherent scatter Svalbard radar (ESR, and compare them with observations of dayside auroral luminosity, as seen at a wavelength of 630 nm by a meridian scanning photometer at Ny Ålesund, and of plasma flows, as seen by the CUTLASS (co-operative UK twin location auroral sounding system Finland HF radar. The optical data reveal a series of poleward-moving transient red-line (630 nm enhancements, events that have been associated with bursts in the rate of magnetopause reconnection generating new open flux. The combined observations at this time have strong similarities to predictions of the effects of soft electron precipitation modulated by pulsed reconnection, as made by Davis and Lockwood (1996; however, the effects of rapid zonal flow in the ionosphere, caused by the magnetic curvature force on the newly opened field lines, are found to be a significant additional factor. In particular, it is shown how enhanced plasma loss rates induced by the rapid convection can explain two outstanding anomalies of the 630 nm transients, namely how minima in luminosity form between the poleward-moving events and how events can re-brighten as they move poleward. The observations show how cusp/cleft aurora and transient poleward-moving auroral forms appear in the ESR data and the conditions which cause enhanced 630 nm emission in the transients: they are an important first step in enabling the ESR to identify these features away from the winter solstice when supporting auroral observations are not available.Key words: Ionosphere (polar ionosphere - Magnetospheric physics (magnetopause; cusp and boundary layers; solar wind-magnetosphere interactions

  19. Characteristics of merging at the magnetopause inferred from dayside 557.7-nm all-sky images: IMF drivers of poleward moving auroral forms

    Directory of Open Access Journals (Sweden)

    N. C. Maynard

    2006-11-01

    Full Text Available We combine in situ measurements from Cluster with high-resolution 557.7 nm all-sky images from South Pole to investigate the spatial and temporal evolution of merging on the dayside magnetopause. Variations of 557.7 nm emissions were observed at a 6 s cadence at South Pole on 29 April 2003 while significant changes in the Interplanetary Magnetic Field (IMF clock angle were reaching the magnetopause. Electrons energized at merging sites are the probable sources for 557.7 nm cusp emissions. At the same time Cluster was crossing the pre-noon cusp in the Northern Hemisphere. The combined observations confirm results of a previous study that merging events can occur at multiple sites simultaneously and vary asynchronously on time scales of 10 s to 3 min (Maynard et al., 2004. The intensity of the emissions and the merging rate appear to vary with changes in the IMF clock angle, IMF BX and the dynamic pressure of the solar wind. Most poleward moving auroral forms (PMAFs reflect responses to changes in interplanetary medium rather than to local processes. The changes in magnetopause position required by increases in dynamic pressure are mediated by merging and result in the generation of PMAFs. Small (15–20% variations in dynamic pressure of the solar wind are sufficient to launch PMAFs. Changes in IMF BX create magnetic flux compressions and rarefactions in the solar wind. Increases (decreases in IMF BX strengthens |B| near northern (southern hemisphere merging sites thereby enhancing merging rates and triggering PMAFs. When correlating responses in the two hemispheres, the presence of significant IMF BX also requires that different lag-times be applied to ACE measurements acquired ~0.1 AU upstream of Earth. Cluster observations set lag times for merging at Northern Hemisphere sites; post-noon optical emissions set times of Southern Hemisphere merging. All-sky images and magnetohydrodynamic simulations indicate that merging occurs in multiple

  20. The thermospheric effects of a rapid polar cap expansion

    Directory of Open Access Journals (Sweden)

    D. W. Idenden

    Full Text Available In a previous publication we used results from a coupled thermosphere-ionosphere-plasmasphere model to illustrate a new mechanism for the formation of a large-scale patch of ionisation arising from a rapid polar cap expansion. Here we describe the thermospheric response to that polar cap expansion, and to the ionospheric structure produced. The response is dominated by the energy and momentum input at the dayside throat during the expansion phase itself. These inputs give rise to a large-scale travelling atmospheric disturbance (TAD that propagates both antisunward across the polar cap and equatorward at speeds much greater than both the ion drifts and the neutral winds. We concentrate only on the initially poleward travelling disturbance. The disturbance is manifested in the neutral temperature and wind fields, the height of the pressure level surfaces and in the neutral density at fixed heights. The thermospheric effects caused by the ionospheric structure produced during the expansion are hard to discern due to the dominating effects of the TAD.

    Key words. Ionosphere (ionosphere · atmosphere interaction; modeling and forecasting; plasma convection.

  1. The thermospheric effects of a rapid polar cap expansion

    Directory of Open Access Journals (Sweden)

    D. W. Idenden

    1998-10-01

    Full Text Available In a previous publication we used results from a coupled thermosphere-ionosphere-plasmasphere model to illustrate a new mechanism for the formation of a large-scale patch of ionisation arising from a rapid polar cap expansion. Here we describe the thermospheric response to that polar cap expansion, and to the ionospheric structure produced. The response is dominated by the energy and momentum input at the dayside throat during the expansion phase itself. These inputs give rise to a large-scale travelling atmospheric disturbance (TAD that propagates both antisunward across the polar cap and equatorward at speeds much greater than both the ion drifts and the neutral winds. We concentrate only on the initially poleward travelling disturbance. The disturbance is manifested in the neutral temperature and wind fields, the height of the pressure level surfaces and in the neutral density at fixed heights. The thermospheric effects caused by the ionospheric structure produced during the expansion are hard to discern due to the dominating effects of the TAD.Key words. Ionosphere (ionosphere · atmosphere interaction; modeling and forecasting; plasma convection.

  2. Thermal Expansion of Polyurethane Foam

    Science.gov (United States)

    Lerch, Bradley A.; Sullivan, Roy M.

    2006-01-01

    expansion tests and the response of the microstructure. A novel optical method is described which is appropriate for measuring thermal expansion at high temperatures without influencing the thermal expansion measurement. Detailed microstructural investigations will also be described which show cell expansion as a function of temperature. Finally, a phenomenological model on thermal expansion will be described.

  3. An inter-comparison of HO2 measured by Fluorescence Assay by Gas Expansion and Cavity Ringdown Spectroscopy in the Highly Instrumented Reactor for Atmospheric Chemistry.

    Science.gov (United States)

    Brennan, A.; Onel, L. C.; Gianella, M.; Ronnie, G.; Aguila, A. L.; Hancock, G.; Whalley, L.; Seakins, P. W.; Ritchie, G.; Heard, D. E.

    2017-12-01

    HO2 is an important species in the atmosphere, as it is involved in the HOx radical reaction cycle that is critical to the oxidation of atmospheric pollutants and the ultimate cleaning of the troposphere. One of the most widely utilised methods to measure HO2 is Fluorescence Assay by Gas Expansion (FAGE), which indirectly measures HO2 by sampling into a low pressure cell and titrating HO2 with NO to produce OH that is then detected by Laser Induced Fluorescence. This is an indirect and non-absolute detection technique that requires careful calibration to convert the measured signal into [HO2], which involves the photolysis of H2O at 185 nm to produce OH and HO2, and is subject to 30 % errors at 2σ level. The work presented here shows the validation of the FAGE technique and its calibration procedure through inter-comparison experiments between the non-absolute FAGE technique and Cavity Ringdown Spectroscopy (CRDS), an absolute absorption based method. The CRDS system was used to excite the first O-H overtone of the HO2 absorption band at 1506.43 nm, and features a cavity length of 1.2 m and a total path of 60 km. The experiments were performed inside the 2.25 m3 stainless steel Highly Instrumented Reactor for Atmospheric Chemistry (HIRAC), using a synthetic air mixture at 150 and 1000 mbar of pressure and 298 K. HO2 was generated by photolysis of Cl2 at 365 nm in the presence of CH3OH and O2, and the [HO2] was monitored using both instruments. Additionally, monitoring the temporal decay of HO2 during its self-reaction provided an alternative calibration method for the FAGE instrument, and allowed the absorption cross section of HO2 at 1506.43 nm, σHO2, to be measured. FAGE calibration factors determined through the second order decays of HO2 at 1000 mbar agreed within 8 % of the H2O photolysis method, and determinations of σHO2 at 150 and 1000 mbar agree with previously reported data within 20 % and 12 % respectively. [HO2] correlation plots between the two

  4. SABRE observations of structured ionospheric flows during substorm expansion phase onset

    Directory of Open Access Journals (Sweden)

    E. G. Bradshaw

    1994-08-01

    Full Text Available The irregularity velocity patterns observed by the SABRE coherent radar at substorm expansion phase onset, which is identified by magnetometer observations of Pi2 pulsations, are occasionally highly structured. In all the examples of structured velocity patterns examined, the SABRE viewing area is located at longitudes within the inferred substorm current wedge. Three types of structured velocity regime are apparent depending on the level of magnetic activity and the position of the radar viewing area relative to the substorm enhanced currents and the Pi2 pulsation generation region. Firstly, vortex-like velocity patterns are observed and these may be caused by the field-aligned currents associated with the substorm current wedge. Secondly, regions of equatorward velocity are also observed at times of substorm expansion phase onset moving longitudinally across the SABRE viewing area. The longitudinal movement is usually westward although an example of eastward motion has been observed. The phase velocity of these regions of equatorward flow is typically 1-3 km s-1. The observed equatorward velocities occur at the poleward edge or poleward of the background convection velocities observed by SABRE. These equatorward velocities may be related to the westward travelling surge and to the expansion (eastwards as well as westwards of the brightening arc region at substorm onset. Thirdly, the flow rotates equatorward within the field of view but does not then appear to move longitudinally. These equatorward velocities may relate to the earthward surge of plasma from the magnetotail at substorm onset.

  5. The Rate and Process of Mangrove Forest Expansion on Above and Below Ground Carbon Relations in Coastal Louisiana

    Science.gov (United States)

    Doyle, T. W.; Pham, T. H.; Reyes, M. R.; Meriwether, J. R.

    2016-02-01

    Recent field studies have documented measureable mangrove expansion landward in tropical zones and poleward in temperate saltmarsh around the northern Gulf of Mexico. Louisiana, in particular, has been recolonized by black mangrove, Avicennia germinans, over a large spatial extent since complete dieback from freeze dating back two decades. Study sites were established near Fourchon, Louisiana to account for the rate and process of marsh/mangrove dominance on carbon burial and elevation change over the past 50 years. Transects were oriented perpendicular from waterway berm of tall and scrub mangrove cover on higher ground grading to low marsh settings of saltmarsh and mixed mangrove ingrowth. Elevation mapping, plant cover and biomass sampling, and soil core dating were conducted to evaluate carbon relations above and below ground. Results showed that sites with tall mangrove have significantly higher above ground biomass than Spartina marsh and mixed marsh/mangrove zone. AG biomass was positively correlated with soil surface elevation and negatively with tidal flood frequency. In addition, tall mangrove zones recorded a twofold increase in soil accretion and carbon burial rates compared with saltmarsh soils based on 137Cs dating. These findings support a positive feedback of mangrove ingrowth and persistence on carbon production and burial allowing higher accretion rates and elevation gains when favored by warmer climate periods lacking or following episodic freeze events.

  6. Recent Northern Hemisphere tropical expansion primarily driven by black carbon and tropospheric ozone.

    Science.gov (United States)

    Allen, Robert J; Sherwood, Steven C; Norris, Joel R; Zender, Charles S

    2012-05-16

    Observational analyses have shown the width of the tropical belt increasing in recent decades as the world has warmed. This expansion is important because it is associated with shifts in large-scale atmospheric circulation and major climate zones. Although recent studies have attributed tropical expansion in the Southern Hemisphere to ozone depletion, the drivers of Northern Hemisphere expansion are not well known and the expansion has not so far been reproduced by climate models. Here we use a climate model with detailed aerosol physics to show that increases in heterogeneous warming agents--including black carbon aerosols and tropospheric ozone--are noticeably better than greenhouse gases at driving expansion, and can account for the observed summertime maximum in tropical expansion. Mechanistically, atmospheric heating from black carbon and tropospheric ozone has occurred at the mid-latitudes, generating a poleward shift of the tropospheric jet, thereby relocating the main division between tropical and temperate air masses. Although we still underestimate tropical expansion, the true aerosol forcing is poorly known and could also be underestimated. Thus, although the insensitivity of models needs further investigation, black carbon and tropospheric ozone, both of which are strongly influenced by human activities, are the most likely causes of observed Northern Hemisphere tropical expansion.

  7. Thermal and hygroscopic expansion characteristics of bamboo

    OpenAIRE

    Huang, Puxi; Chang, Wen-shao; Ansell, Martin P.; Bowen, Chris R.; Chew, John Y. M.; Adamak, Vana i

    2017-01-01

    The expansion and contraction of bamboo caused by temperature and moisture variations must be evaluated\\ud if bamboo is to be utilised as a building material. However, detailed expansion data, especially data in the ascent and\\ud descent processes of temperature and moisture are unexplored. The aim of this study is to investigate the expansion\\ud characteristics of Phyllostachys edulis (Moso bamboo) in ascent and descent processes of temperature and moisture.\\ud The measurement of linear ther...

  8. Thermal expansion in small metallic particles

    International Nuclear Information System (INIS)

    Ivanov, A.S.

    1985-01-01

    An anomalously low thermal expansion observable in small particles is attributed to extending effect of the shell. It is shown that the coefficient of thermal expansion of the oxide-film-coated aluminium particles calculated using elastic constants and coefficients of thermal expansion of massive materials agres well with those measured experimentally. The linear dilatation of the shell, its stress to rupture and the values of the structural tension are estimated vs the temperature

  9. Negative thermal expansion materials

    International Nuclear Information System (INIS)

    Evans, J.S.O.

    1997-01-01

    The recent discovery of negative thermal expansion over an unprecedented temperature range in ZrW 2 O 8 (which contracts continuously on warming from below 2 K to above 1000 K) has stimulated considerable interest in this unusual phenomenon. Negative and low thermal expansion materials have a number of important potential uses in ceramic, optical and electronic applications. We have now found negative thermal expansion in a large new family of materials with the general formula A 2 (MO 4 ) 3 . Chemical substitution dramatically influences the thermal expansion properties of these materials allowing the production of ceramics with negative, positive or zero coefficients of thermal expansion, with the potential to control other important materials properties such as refractive index and dielectric constant. The mechanism of negative thermal expansion and the phase transitions exhibited by this important new class of low-expansion materials will be discussed. (orig.)

  10. Contrast Enhanced Microscopy Digital Image Correlation: A General Method to Contact-Free Coefficient of Thermal Expansion Measurement of Polymer Films

    Science.gov (United States)

    Jairo A. Diaz; Robert J. Moon; Jeffrey P. Youngblood

    2014-01-01

    Thermal expansion represents a vital indicator of the processing history and dimensional stability of materials. Solvent-sensitive, thin, and compliant samples are particularly challenging to test. Here we describe how textures highlighted by contrast enhanced optical microscopy modes (i.e., polarized light (PL), phase contrast (PC)) and bright field (BF) can be used...

  11. An expansion for Neutrino Phenomenology

    CERN Document Server

    Grinstein, Benjamin

    2012-01-01

    We develop a formalism for constructing the Pontecorvo-Maki-Nakagawa-Sakata (PMNS) matrix and neutrino masses using an expansion that originates when a sequence of heavy right handed neutrinos are integrated out, assuming a seesaw mechanism for the origin of neutrino masses. The expansion establishes relationships between the structure of the PMNS matrix and the mass differences of neutrinos, and allows symmetry implications for measured deviations from tri-bimaximal form to be studied systematically. Our approach does not depend on choosing the rotation between the weak and mass eigenstates of the charged lepton fields to be diagonal. We comment on using this expansion to examine the symmetry implications of the recent results from the Daya-Bay collaboration reporting the discovery of a non zero value for theta_{13}, indicating a deviation from tri-bimaximal form, with a significance of 5.2 sigma.

  12. Convergence of mayer expansions

    International Nuclear Information System (INIS)

    Brydges, D.C.

    1986-01-01

    The tree graph bound of Battle and Federbush is extended and used to provide a simple criterion for the convergence of (iterated) Mayer expansions. As an application estimates on the radius of convergence of the Mayer expansion for the two-dimensional Yukawa gas (nonstable interaction) are obtained

  13. An asymptotic expansion approach to the inverse radiative transfer problem. [to infer concentration profiles of the atmosphere from measurements made onboard a satellite

    Science.gov (United States)

    Gomberg, R. I.; Buglia, J. J.

    1979-01-01

    An iterative technique which recovers density profiles in a nonhomogeneous absorbing atmosphere is derived. The technique is based on the concept of factoring a function of the density profile into the product of a known term and a term which is not known, but whose power series expansion can be found. This series converges rapidly under a wide range of conditions. A demonstration example of simulated data from a high resolution infrared heterodyne instrument is inverted. For the examples studied, the technique is shown to be capable of extracting features of ozone profiles in the troposphere and to be particularly stable.

  14. Statistical measures approximations for the Gaussian part of the stochastic nonlinear damped Duffing oscillator solution process under the application of Wiener Hermite expansion linked by the multi-step differential transformed method

    Directory of Open Access Journals (Sweden)

    R.A. Zait

    2016-07-01

    Full Text Available In this paper, the stochastic Wiener Hermite expansion (WHE is used to find the statistical measures (mean and variance of the first order stochastic approximation (Gaussian part of the stochastic solution processes related to the nonlinear damped Duffing oscillator model which is excited randomly by white noise process. Under the application of WHE, a deterministic model is generated to simulate the statistical measures. In next stages, smi-analytical treatments are performed under applying multi-step differential transformed method (Ms-DTM and some cases study are illustrated related to the statistical properties using Mathematica10 software.

  15. What Has Controlled the Poleward Migration of Annual Averaged Location of Tropical Cyclone Lifetime Maximum Intensity Over the Western North Pacific Since 1961?

    Science.gov (United States)

    Song, Jinjie; Klotzbach, Philip J.

    2018-01-01

    The long-term tendency of the average latitude at which tropical cyclones (TCs) reach their lifetime maximum intensity (LMI) over the western North Pacific (WNP) is investigated in this study. Despite the post-1961 significant poleward shift in the annual mean LMI latitude, the migration rate is nonuniform on decadal timescales, having an insignificant trend and a significant increasing trend before and after 1980, respectively. Interdecadal fluctuations of TC genesis latitude (φG) as well as increases in latitudinal distance between genesis position and LMI location (Δφ) are both responsible for the observed LMI latitude trends. The former is linked to the Interdecadal Pacific Oscillation (IPO), which favors TCs forming in the northwestern (southeastern) quadrant of the WNP in negative (positive) IPO phases. The latter primarily results from the continuous warming of WNP sea surface temperature, which further increases the maximum potential intensity and extends the region favorable for TC development to higher latitudes.

  16. The effect of the low-level jet on the poleward water vapour transport in the central region of South America

    Science.gov (United States)

    Berri, Guillermo J.; Inzunza, Juan B.

    The low-level jet (LLJ) in the central region of South America is studied. This LLJ is generated by the daily cycle of convergence and divergence east of the Andes Mountains. We use the 1973-1974 radiosonde and pilot balloon data set from the upper air weather stations, Salta and Resistencia, in northern Argentina to select 10 LLJ cases and another 10 NoLLJ cases (when the LLJ is not present). We use the University of Utah Mesoscale Model to simulate these situations in order to obtain a high-resolution low-level wind field. These model predictions are then used to calculate the meridional water vapour transport across a vertical cross-section, along 26°S in central South America. The results reveal that the LLJs are a very effective mechanism for the poleward water vapour transport.

  17. Negative thermal expansion

    International Nuclear Information System (INIS)

    Barrera, G D; Bruno, J A O; Barron, T H K; Allan, N L

    2005-01-01

    There has been substantial renewed interest in negative thermal expansion following the discovery that cubic ZrW 2 O 8 contracts over a temperature range in excess of 1000 K. Substances of many different kinds show negative thermal expansion, especially at low temperatures. In this article we review the underlying thermodynamics, emphasizing the roles of thermal stress and elasticity. We also discuss vibrational and non-vibrational mechanisms operating on the atomic scale that are responsible for negative expansion, both isotropic and anisotropic, in a wide range of materials. (topical review)

  18. Nuremberg's S-Bahn - operational infrastructure plans for imminent expansion measures; S-Bahn Nuernberg - betriebliche Infrastrukturplanungen fuer die naechsten Ausbaumassnahmen

    Energy Technology Data Exchange (ETDEWEB)

    Schilcher, A. [Anlagenmanagement Nordbayern, S-Bahn Nuernberg, Infrastruktur, DB Netz, NL Sued, Nuernberg (Germany)

    2007-01-15

    The aim for the end of the current decade is to have extended the network of Nuremberg's 'S-Bahn' (urban regional express) system from today's total length of 67 km to 206 km. The existing S-Bahn trains run on their own dedicated tracks. The big challenge for the planned network expansion has involved finding economical ways of running these trains with fixed headways over existing tracks shared with other types of both freight and passenger trains. The most important preliminary stage was the drawing up of comprehensive plans for the infrastructure really needed for these new operations. This planning work was done using a variety of tools, such as simulation models, node analyses and timetable constructions, as a function of the complexity of each of the operational and timetabling constraints and the most up-to-date forecasts regarding traffic volumes. (orig.)

  19. Controlled Thermal Expansion Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — There has always been a need for controlled thermal expansion alloys suitable for mounting optics and detectors in spacecraft applications.  These alloys help...

  20. Weakly relativistic plasma expansion

    Energy Technology Data Exchange (ETDEWEB)

    Fermous, Rachid, E-mail: rfermous@usthb.dz; Djebli, Mourad, E-mail: mdjebli@usthb.dz [Theoretical Physics Laboratory, Faculty of Physics, USTHB, B.P. 32 Bab-Ezzouar, 16079 Algiers (Algeria)

    2015-04-15

    Plasma expansion is an important physical process that takes place in laser interactions with solid targets. Within a self-similar model for the hydrodynamical multi-fluid equations, we investigated the expansion of both dense and under-dense plasmas. The weakly relativistic electrons are produced by ultra-intense laser pulses, while ions are supposed to be in a non-relativistic regime. Numerical investigations have shown that relativistic effects are important for under-dense plasma and are characterized by a finite ion front velocity. Dense plasma expansion is found to be governed mainly by quantum contributions in the fluid equations that originate from the degenerate pressure in addition to the nonlinear contributions from exchange and correlation potentials. The quantum degeneracy parameter profile provides clues to set the limit between under-dense and dense relativistic plasma expansions at a given density and temperature.

  1. Resonant state expansions

    International Nuclear Information System (INIS)

    Lind, P.

    1993-02-01

    The completeness properties of the discrete set of bound state, virtual states and resonances characterizing the system of a single nonrelativistic particle moving in a central cutoff potential is investigated. From a completeness relation in terms of these discrete states and complex scattering states one can derive several Resonant State Expansions (RSE). It is interesting to obtain purely discrete expansion which, if valid, would significantly simplify the treatment of the continuum. Such expansions can be derived using Mittag-Leffler (ML) theory for a cutoff potential and it would be nice to see if one can obtain the same expansions starting from an eigenfunction theory that is not restricted to a finite sphere. The RSE of Greens functions is especially important, e.g. in the continuum RPA (CRPA) method of treating giant resonances in nuclear physics. The convergence of RSE is studied in simple cases using square well wavefunctions in order to achieve high numerical accuracy. Several expansions can be derived from each other by using the theory of analytic functions and one can the see how to obtain a natural discretization of the continuum. Since the resonance wavefunctions are oscillating with an exponentially increasing amplitude, and therefore have to be interpreted through some regularization procedure, every statement made about quantities involving such states is checked by numerical calculations.Realistic nuclear wavefunctions, generated by a Wood-Saxon potential, are used to test also the usefulness of RSE in a realistic nuclear calculation. There are some fundamental differences between different symmetries of the integral contour that defines the continuum in RSE. One kind of symmetry is necessary to have an expansion of the unity operator that is idempotent. Another symmetry must be used if we want purely discrete expansions. These are found to be of the same form as given by ML. (29 refs.)

  2. Thermal expansion: Metallic elements and alloys. [Handbook

    Science.gov (United States)

    Touloukian, Y. S.; Kirby, R. K.; Taylor, R. E.; Desai, P. D.

    1975-01-01

    The introductory sections of the work are devoted to the theory of thermal expansion of solids and to methods for the measurement of the linear thermal expansion of solids (X-ray methods, high speed methods, interferometry, push-rod dilatometry, etc.). The bulk of the work is devoted to numerical data on the thermal linear expansion of all the metallic elements, a large number of intermetallics, and a large number of binary alloy systems and multiple alloy systems. A comprehensive bibliography is provided along with an index to the materials examined.

  3. Expansion joints for LMFBR

    International Nuclear Information System (INIS)

    Dzenus, M.; Hundhausen, W.; Jansing, W.

    1980-01-01

    This discourse recounts efforts put into the SNR-2 project; specifically the development of compensation devices. The various prototypes of these compensation devices are described and the state of the development reviewed. Large Na (sodium)-heat transfer systems require a lot of valuable space if the component lay-out does not include compensation devices. So, in order to condense the spatial requirement as much as possible, expansion joints must be integrated into the pipe system. There are two basic types to suit the purpose: axial expansion joints and angular expansion joints. The expansion joints were developed on the basis of specific design criteria whereby differentiation is made between expansion joints of small and large nominal diameter. Expansion joints for installation in the sodium-filled primary piping are equipped with safety bellows in addition to the actual working bellows. Expansion joints must be designed and mounted in a manner to completely withstand seismic forces. The design must exclude any damage to the bellows during intermittent operations, that is, when sodium is drained the bellows' folds must be completely empty; otherwise residual solidified sodium could destroy the bellows when restarting. The expansion joints must be engineered on the basis of the following design data for the secondary system of the SNR project: working pressure: 16 bar; failure mode pressure: 5 events; failure mode: 5 sec., 28.5 bar, 520 deg. C; working temperature: 520 deg. C; temperature transients: 30 deg. C/sec.; service life: 200,000 h; number of load cycles: 10 4 ; material: 1.4948 or 1.4919; layer thickness of folds: 0.5 mm; angular deflection (DN 800): +3 deg. C or; axial expansion absorption (DN 600): ±80 mm; calculation: ASME class. The bellows' development work is not handled within this scope. The bellows are supplied by leading manufacturers, and warrant highest quality. Multiple bellows were selected on the basis of maximum elasticity - a property

  4. Conformal expansions and renormalons

    Energy Technology Data Exchange (ETDEWEB)

    Rathsman, J.

    2000-02-07

    The coefficients in perturbative expansions in gauge theories are factorially increasing, predominantly due to renormalons. This type of factorial increase is not expected in conformal theories. In QCD conformal relations between observables can be defined in the presence of a perturbative infrared fixed-point. Using the Banks-Zaks expansion the authors study the effect of the large-order behavior of the perturbative series on the conformal coefficients. The authors find that in general these coefficients become factorially increasing. However, when the factorial behavior genuinely originates in a renormalon integral, as implied by a postulated skeleton expansion, it does not affect the conformal coefficients. As a consequence, the conformal coefficients will indeed be free of renormalon divergence, in accordance with previous observations concerning the smallness of these coefficients for specific observables. The authors further show that the correspondence of the BLM method with the skeleton expansion implies a unique scale-setting procedure. The BLM coefficients can be interpreted as the conformal coefficients in the series relating the fixed-point value of the observable with that of the skeleton effective charge. Through the skeleton expansion the relevance of renormalon-free conformal coefficients extends to real-world QCD.

  5. Local behaviour of negative thermal expansion materials

    International Nuclear Information System (INIS)

    Fornasini, P.; Dalba, G.; Grisenti, R.; Purans, J.; Vaccari, M.; Rocca, F.; Sanson, A.

    2006-01-01

    EXAFS can represent a powerful probe of the local behaviour of negative thermal expansion (NTE) materials, thanks to the possibility of measuring the expansion of selected inter-atomic bonds and the perpendicular relative atomic displacements. The effectiveness of EXAFS for NTE studies is illustrated by a comparison of results recently obtained on germanium, CuCl and the cuprites Cu 2 O and Ag 2 O

  6. Coordinated Cluster, ground-based instrumentation and low-altitude satellite observations of transient poleward-moving events in the ionosphere and in the tail lobe

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    Full Text Available During the interval between 8:00–9:30 on 14 January 2001, the four Cluster spacecraft were moving from the central magnetospheric lobe, through the dusk sector mantle, on their way towards intersecting the magnetopause near 15:00 MLT and 15:00 UT. Throughout this interval, the EISCAT Svalbard Radar (ESR at Longyearbyen observed a series of poleward-moving transient events of enhanced F-region plasma concentration ("polar cap patches", with a repetition period of the order of 10 min. Allowing for the estimated solar wind propagation delay of 75 ( ± 5 min, the interplanetary magnetic field (IMF had a southward component during most of the interval. The magnetic footprint of the Cluster spacecraft, mapped to the ionosphere using the Tsyganenko T96 model (with input conditions prevailing during this event, was to the east of the ESR beams. Around 09:05 UT, the DMSP-F12 satellite flew over the ESR and showed a sawtooth cusp ion dispersion signature that also extended into the electrons on the equatorward edge of the cusp, revealing a pulsed magnetopause reconnection. The consequent enhanced ionospheric flow events were imaged by the SuperDARN HF backscatter radars. The average convection patterns (derived using the AMIE technique on data from the magnetometers, the EISCAT and SuperDARN radars, and the DMSP satellites show that the associated poleward-moving events also convected over the predicted footprint of the Cluster spacecraft. Cluster observed enhancements in the fluxes of both electrons and ions. These events were found to be essentially identical at all four spacecraft, indicating that they had a much larger spatial scale than the satellite separation of the order of 600 km. Some of the events show a correspondence between the lowest energy magnetosheath electrons detected by the PEACE instrument on Cluster (10–20 eV and the topside ionospheric enhancements seen by the ESR (at 400–700 km. We suggest that a potential barrier at the

  7. Coordinated Cluster, ground-based instrumentation and low-altitude satellite observations of transient poleward-moving events in the ionosphere and in the tail lobe

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    2001-09-01

    Full Text Available During the interval between 8:00–9:30 on 14 January 2001, the four Cluster spacecraft were moving from the central magnetospheric lobe, through the dusk sector mantle, on their way towards intersecting the magnetopause near 15:00 MLT and 15:00 UT. Throughout this interval, the EISCAT Svalbard Radar (ESR at Longyearbyen observed a series of poleward-moving transient events of enhanced F-region plasma concentration ("polar cap patches", with a repetition period of the order of 10 min. Allowing for the estimated solar wind propagation delay of 75 ( ± 5 min, the interplanetary magnetic field (IMF had a southward component during most of the interval. The magnetic footprint of the Cluster spacecraft, mapped to the ionosphere using the Tsyganenko T96 model (with input conditions prevailing during this event, was to the east of the ESR beams. Around 09:05 UT, the DMSP-F12 satellite flew over the ESR and showed a sawtooth cusp ion dispersion signature that also extended into the electrons on the equatorward edge of the cusp, revealing a pulsed magnetopause reconnection. The consequent enhanced ionospheric flow events were imaged by the SuperDARN HF backscatter radars. The average convection patterns (derived using the AMIE technique on data from the magnetometers, the EISCAT and SuperDARN radars, and the DMSP satellites show that the associated poleward-moving events also convected over the predicted footprint of the Cluster spacecraft. Cluster observed enhancements in the fluxes of both electrons and ions. These events were found to be essentially identical at all four spacecraft, indicating that they had a much larger spatial scale than the satellite separation of the order of 600 km. Some of the events show a correspondence between the lowest energy magnetosheath electrons detected by the PEACE instrument on Cluster (10–20 eV and the topside ionospheric enhancements seen by the ESR (at 400–700 km. We suggest that a potential barrier at the

  8. Uniform gradient expansions

    Directory of Open Access Journals (Sweden)

    Massimo Giovannini

    2015-06-01

    Full Text Available Cosmological singularities are often discussed by means of a gradient expansion that can also describe, during a quasi-de Sitter phase, the progressive suppression of curvature inhomogeneities. While the inflationary event horizon is being formed the two mentioned regimes coexist and a uniform expansion can be conceived and applied to the evolution of spatial gradients across the protoinflationary boundary. It is argued that conventional arguments addressing the preinflationary initial conditions are necessary but generally not sufficient to guarantee a homogeneous onset of the conventional inflationary stage.

  9. Uniform gradient expansions

    CERN Document Server

    Giovannini, Massimo

    2015-01-01

    Cosmological singularities are often discussed by means of a gradient expansion that can also describe, during a quasi-de Sitter phase, the progressive suppression of curvature inhomogeneities. While the inflationary event horizon is being formed the two mentioned regimes coexist and a uniform expansion can be conceived and applied to the evolution of spatial gradients across the protoinflationary boundary. It is argued that conventional arguments addressing the preinflationary initial conditions are necessary but generally not sufficient to guarantee a homogeneous onset of the conventional inflationary stage.

  10. Low-temperature thermal expansion

    International Nuclear Information System (INIS)

    Collings, E.W.

    1986-01-01

    This chapter discusses the thermal expansion of insulators and metals. Harmonicity and anharmonicity in thermal expansion are examined. The electronic, magnetic, an other contributions to low temperature thermal expansion are analyzed. The thermodynamics of the Debye isotropic continuum, the lattice-dynamical approach, and the thermal expansion of metals are discussed. Relative linear expansion at low temperatures is reviewed and further calculations of the electronic thermal expansion coefficient are given. Thermal expansions are given for Cu, Al and Ti. Phenomenologic thermodynamic relationships are also discussed

  11. Wake Expansion Models

    DEFF Research Database (Denmark)

    Branlard, Emmanuel Simon Pierre

    2017-01-01

    Different models of wake expansion are presented in this chapter: the 1D momentum theory model, the cylinder analog model and Theodorsen’s model. Far wake models such as the ones from Frandsen or Rathmann or only briefly mentioned. The different models are compared to each other. Results from...

  12. AUTO-EXPANSIVE FLOW

    Science.gov (United States)

    Physics suggests that the interplay of momentum, continuity, and geometry in outward radial flow must produce density and concomitant pressure reductions. In other words, this flow is intrinsically auto-expansive. It has been proposed that this process is the key to understanding...

  13. Static gas expansion cooler

    Science.gov (United States)

    Guzek, J.C.; Lujan, R.A.

    1984-01-01

    Disclosed is a cooler for television cameras and other temperature sensitive equipment. The cooler uses compressed gas ehich is accelerated to a high velocity by passing it through flow passageways having nozzle portions which expand the gas. This acceleration and expansion causes the gas to undergo a decrease in temperature thereby cooling the cooler body and adjacent temperature sensitive equipment.

  14. Surgically assisted rapid maxillary expansion in adults.

    Science.gov (United States)

    Pogrel, M A; Kaban, L B; Vargervik, K; Baumrind, S

    1992-01-01

    Twelve adults with maxillary width discrepancy of greater than 5 mm were treated by surgically assisted rapid maxillary expansion. The procedure consisted of bilateral zygomatic buttress and midpalatal osteotomies combined with the use of a tooth-borne orthopedic device postoperatively. Mean palatal expansion of 7.5 mm (range of 6 to 13 mm), measured in the first molar region, was achieved within 3 weeks in all patients. Expansion remained stable during the 12-month study period, with a mean relapse for the entire group of 0.88 +/- 0.48 mm. Morbidity was limited to mild postoperative discomfort. The results of this preliminary study indicated that surgically assisted rapid maxillary expansion is a safe, simple, and reliable procedure for achieving a permanent increase in skeletal maxillary width in adults. Further study is necessary to document the three-dimensional movements of the maxillary segments and long-term stability of the skeletal and dental changes.

  15. Thermal expansion of diamond at low temperatures.

    Science.gov (United States)

    Stoupin, Stanislav; Shvyd'ko, Yuri V

    2010-02-26

    Temperature variation of a lattice parameter of a synthetic diamond crystal (type IIa) was measured using high-energy-resolution x-ray Bragg diffraction in backscattering. A 2 order of magnitude improvement in the measurement accuracy allowed us to directly probe the linear thermal expansion coefficient at temperatures below 100 K. The lowest value measured was 2x10{-9} K-1. It was found that the coefficient deviates from the expected Debye law (T3) while no negative thermal expansion was observed. The anomalous behavior might be attributed to tunneling states due to low concentration impurities.

  16. The development and application of a fabric objective measurement data system in the South African apparel industry: Hygral expansion and formability

    CSIR Research Space (South Africa)

    Das, S

    2017-03-01

    Full Text Available and improve the quality of locally produced woven apparel fabrics and garments. To this end, various FOM and other quality related parameters have been measured and analysed for a wide range of commercial worsted type fabrics used in the South African apparel...

  17. Strain expansion-reduction approach

    Science.gov (United States)

    Baqersad, Javad; Bharadwaj, Kedar

    2018-02-01

    Validating numerical models are one of the main aspects of engineering design. However, correlating million degrees of freedom of numerical models to the few degrees of freedom of test models is challenging. Reduction/expansion approaches have been traditionally used to match these degrees of freedom. However, the conventional reduction/expansion approaches are only limited to displacement, velocity or acceleration data. While in many cases only strain data are accessible (e.g. when a structure is monitored using strain-gages), the conventional approaches are not capable of expanding strain data. To bridge this gap, the current paper outlines a reduction/expansion technique to reduce/expand strain data. In the proposed approach, strain mode shapes of a structure are extracted using the finite element method or the digital image correlation technique. The strain mode shapes are used to generate a transformation matrix that can expand the limited set of measurement data. The proposed approach can be used to correlate experimental and analytical strain data. Furthermore, the proposed technique can be used to expand real-time operating data for structural health monitoring (SHM). In order to verify the accuracy of the approach, the proposed technique was used to expand the limited set of real-time operating data in a numerical model of a cantilever beam subjected to various types of excitations. The proposed technique was also applied to expand real-time operating data measured using a few strain gages mounted to an aluminum beam. It was shown that the proposed approach can effectively expand the strain data at limited locations to accurately predict the strain at locations where no sensors were placed.

  18. Thermal and Hygric Expansion of High Performance Concrete

    OpenAIRE

    J. Toman; R. Černý

    2001-01-01

    The linear thermal expansion coefficient of two types of high performance concrete was measured in the temperature range from 20 °C to 1000 °C, and the linear hygric expansion coefficient was determined in the moisture range from dry material to saturation water content. Comparative methods were applied for measurements of both coefficients. The experimental results show that both the effect of temperature on the values of linear thermal expansion coefficients and the effect of moisture on th...

  19. Expansion tube test time predictions

    Science.gov (United States)

    Gourlay, Christopher M.

    1988-01-01

    The interaction of an interface between two gases and strong expansion is investigated and the effect on flow in an expansion tube is examined. Two mechanisms for the unsteady Pitot-pressure fluctuations found in the test section of an expansion tube are proposed. The first mechanism depends on the Rayleigh-Taylor instability of the driver-test gas interface in the presence of a strong expansion. The second mechanism depends on the reflection of the strong expansion from the interface. Predictions compare favorably with experimental results. The theory is expected to be independent of the absolute values of the initial expansion tube filling pressures.

  20. Expansion at Olympic Dam

    International Nuclear Information System (INIS)

    Lewis, C.

    1997-01-01

    The Olympic Dam orebody is the 6th largest copper and the single largest uranium orebody in the world. Mine production commenced in June 1988, at an annual production rate of around 45,000 tonnes of copper and 1,000 tonnes of uranium. Western Mining Corporation announced in 1996 a proposed $1.25 billion expansion of the Olympic Dam operation to raise the annual production capacity of the mine to 200,000 tonnes of copper, approximately 3,700 tonnes of uranium, 75,000 ounces of gold and 950,000 ounces of silver by 2001. Further optimisation work has identified a faster track expansion route, with an increase in the capital cost to $1.487 billion but improved investment outcome, a new target completion date of end 1999, and a new uranium output of 4,600 tonnes per annum from that date

  1. Symmetric eikonal expansion

    International Nuclear Information System (INIS)

    Matsuki, Takayuki

    1976-01-01

    Symmetric eikonal expansion for the scattering amplitude is formulated for nonrelativistic and relativistic potential scatterings and also for the quantum field theory. The first approximations coincide with those of Levy and Sucher. The obtained scattering amplitudes are time reversal invariant for all cases and are crossing symmetric for the quantum field theory in each order of approximation. The improved eikonal phase introduced by Levy and Sucher is also derived from the different approximation scheme from the above. (auth.)

  2. Expansive Soil Crack Depth under Cumulative Damage

    Directory of Open Access Journals (Sweden)

    Bei-xiao Shi

    2014-01-01

    Full Text Available The crack developing depth is a key problem to slope stability of the expansive soil and its project governance and the crack appears under the roles of dry-wet cycle and gradually develops. It is believed from the analysis that, because of its own cohesion, the expansive soil will have a certain amount of deformation under pulling stress but without cracks. The soil body will crack only when the deformation exceeds the ultimate tensile strain that causes cracks. And it is also believed that, due to the combined effect of various environmental factors, particularly changes of the internal water content, the inherent basic physical properties of expansive soil are weakened, and irreversible cumulative damages are eventually formed, resulting in the development of expansive soil cracks in depth. Starting from the perspective of volumetric strain that is caused by water loss, considering the influences of water loss rate and dry-wet cycle on crack developing depth, the crack developing depth calculation model which considers the water loss rate and the cumulative damages is established. Both the proposal of water loss rate and the application of cumulative damage theory to the expansive soil crack development problems try to avoid difficulties in matrix suction measurement, which will surely play a good role in promoting and improving the research of unsaturated expansive soil.

  3. Thermal expansion of fibre-reinforced composites

    International Nuclear Information System (INIS)

    Schneider, B.

    1991-07-01

    The integral thermal expansion and the coefficient of thermal expansion (CTE) of carbon and Kevlar fibre-reinforced composites were measured with high accuracy from 5 K to room temperature. For this, a laser dilatometer and a sophisticated measuring procedure were used. CTE dependence on the orientation angle ω of angle-ply laminates was determined for samples with 5 different fibre alignments (UD 0deg, +/-30deg, +/-45deg, +/-60deg and UD 90deg). A high variability of the CTE with the orientation angle was shown. At angles of approximately +/-30deg even negative CTEs were found. With suitable reinforcing fibres being selected, their absolute values rose up to 30-100% of the positive CTEs of metals. Hence, composites of this type would be suitable as compensating materials in metal constructions where little thermal expansion is desired. To check the lamination theory, theoretical computations of the CTE- ω -dependence were compared with the measured values. An excellent agreement was found. Using the lamination theory, predictions about the expansion behaviour of angle-ply laminates can be made now, if the thermal and mechanical properties of the unidirectional (UD) laminate are known. Furthermore, it is possible to carry out simulation computations aimed at investigating the influence of a single parameter of the UD-laminate (e.g. shear modulus) on the expansion of the angle-ply laminate. (orig.) [de

  4. Motion of the dayside polar cap boundary during substorm cycles: II. Generation of poleward-moving events and polar cap patches by pulses in the magnetopause reconnection rate

    Directory of Open Access Journals (Sweden)

    M. Lockwood

    2005-12-01

    Full Text Available Using data from the EISCAT (European Incoherent Scatter VHF and CUTLASS (Co-operative UK Twin-Located Auroral Sounding System HF radars, we study the formation of ionospheric polar cap patches and their relationship to the magnetopause reconnection pulses identified in the companion paper by Lockwood et al. (2005. It is shown that the poleward-moving, high-concentration plasma patches observed in the ionosphere by EISCAT on 23 November 1999, as reported by Davies et al. (2002, were often associated with corresponding reconnection rate pulses. However, not all such pulses generated a patch and only within a limited MLT range (11:00-12:00 MLT did a patch result from a reconnection pulse. Three proposed mechanisms for the production of patches, and of the concentration minima that separate them, are analysed and evaluated: (1 concentration enhancement within the patches by cusp/cleft precipitation; (2 plasma depletion in the minima between the patches by fast plasma flows; and (3 intermittent injection of photoionisation-enhanced plasma into the polar cap. We devise a test to distinguish between the effects of these mechanisms. Some of the events repeat too frequently to apply the test. Others have sufficiently long repeat periods and mechanism (3 is shown to be the only explanation of three of the longer-lived patches seen on this day. However, effect (2 also appears to contribute to some events. We conclude that plasma concentration gradients on the edges of the larger patches arise mainly from local time variations in the subauroral plasma, via the mechanism proposed by Lockwood et al. (2000.

  5. Thermal and Hygric Expansion of High Performance Concrete

    Directory of Open Access Journals (Sweden)

    J. Toman

    2001-01-01

    Full Text Available The linear thermal expansion coefficient of two types of high performance concrete was measured in the temperature range from 20 °C to 1000 °C, and the linear hygric expansion coefficient was determined in the moisture range from dry material to saturation water content. Comparative methods were applied for measurements of both coefficients. The experimental results show that both the effect of temperature on the values of linear thermal expansion coefficients and the effect of moisture on the values of linear hygric expansion coefficients are very significant and cannot be neglected in practical applications.

  6. Supersonic expansion of argon into vacuum

    International Nuclear Information System (INIS)

    Habets, A.H.M.

    1977-01-01

    A theoretical description of a free supersonic expansion process is given. Three distinct regions in the expansion are discussed, namely the continuum region, the gradual transition to the collisionless regime, and the free-molecular-flow stage. Important topics are the peaking-factor formalism, the thermal-conduction model, and the virtual-source formalism. The formation of the molecular beam from the expansion and condensation phenomena occurring in the expanding gas are discussed. The molecular beam machine used in the measurements is described and special attention is given to the cryopumps used in the supersonic sources as well as to the time-of-flight analysis of the molecular beam velocity distributions. Finally, the processing of experimental data is discussed, particularly the least-squares determination of best-fit representations of the measurements

  7. Load regulating expansion fixture

    International Nuclear Information System (INIS)

    Wagner, L.M.; Strum, M.J.

    1998-01-01

    A free standing self contained device for bonding ultra thin metallic films, such as 0.001 inch beryllium foils is disclosed. The device will regulate to a predetermined load for solid state bonding when heated to a bonding temperature. The device includes a load regulating feature, whereby the expansion stresses generated for bonding are regulated and self adjusting. The load regulator comprises a pair of friction isolators with a plurality of annealed copper members located there between. The device, with the load regulator, will adjust to and maintain a stress level needed to successfully and economically complete a leak tight bond without damaging thin foils or other delicate components. 1 fig

  8. Thermal expansion of granite rocks

    International Nuclear Information System (INIS)

    Stephansson, O.

    1978-04-01

    The thermal expansion of rocks is strongly controlled by the thermal expansion of the minerals. The theoretical thermal expansion of the Stripa Granite is gound to be 21 . 10 -6 [deg C] -1 at 25 deg C and 38 . 10 -6 [deg C] -1 at 400 deg C. The difference in expansion for the rock forming minerals causes micro cracking at heating. The expansion due to micro cracks is found to be of the same order as the mineral expansion. Most of the micro cracks will close at pressures of the order of 10 - 20 MPa. The thermal expansion of a rock mass including the effect of joints is determined in the pilot heater test in the Stripa Mine

  9. Preliminary thermal expansion screening data for tuffs

    International Nuclear Information System (INIS)

    Lappin, A.R.

    1980-03-01

    A major variable in evaluating the potential of silicic tuffs for use in geologic disposal of heat-producing nuclear wastes is thermal expansion. Results of ambient-pressure linear expansion measurements on a group of tuffs that vary treatly in porosity and mineralogy are presente here. Thermal expansion of devitrified welded tuffs is generally linear with increasing temperature and independent of both porosity and heating rate. Mineralogic factors affecting behavior of these tuffs are limited to the presence or absence of cristobalite and altered biotite. The presence of cristobalite results in markedly nonlinear expansion above 200 0 C. If biotite in biotite-hearing rocks alters even slightly to expandable clays, the behavior of these tuffs near the boiling point of water can be dominated by contraction of the expandable phase. Expansion of both high- and low-porosity tuffs containing hydrated silicic glass and/or expandable clays is complex. The behavior of these rocks appears to be completely dominated by dehydration of hydrous phases and, hence, should be critically dependent on fluid pressure. Valid extrapolation of the ambient-pressure results presented here to depths of interest for construction of a nuclear-waste repository will depend on a good understanding of the interaction of dehydration rates and fluid pressures, and of the effects of both micro- and macrofractures on the response of tuff masss

  10. Rethinking expansive learning

    DEFF Research Database (Denmark)

    Kolbæk, Ditte; Lundh Snis, Ulrika

    in their professional organisation and how they developed their identity to become more skilled practitioners. We discuss the effects of the written discussions and reflections on the students’ endeavour to become authors in practice. Our contribution to the research consists of considerations of changing the spoken......Abstract: This paper analyses an online community of master’s students taking a course in ICT and organisational learning. The students initiated and facilitated an educational design for organisational learning called Proactive Review in the organisation where they are employed. By using an online...... discussion forum on Google groups, they created new ways of reflecting and learning. We used netnography to select qualitative postings from the online community and expansive learning concepts for data analysis. The findings show how students changed practices of organisational learning...

  11. Mechanism of actuation in conducting polymers: Osmotic expansion

    DEFF Research Database (Denmark)

    Bay, Lasse; Jacobsen, Torben; West, Keld

    2001-01-01

    Conducting polymers expand or contract when their redox state is changed. This expansion/contraction effect can be separated in an intrinsic part because of changes of the polymer backbone on reduction/oxidation and a part depending on the surrounding electrolyte phase, because of osmotic expansion...... is compared with measurements on PPy(DBS) films. The experiments show that the expansion decreases as the electrolyte concentration is increased. This means that a considerable part of the total expansion is due to the osmotic effect. The osmotic effect should be taken into account when interpreting...

  12. Hole expansion test of third generation steels

    Science.gov (United States)

    Agirre, Julen; Mendiguren, Joseba; Galdos, Lander; de Argandoña, Eneko Sáenz

    2017-10-01

    The trend towards the implementation of new materials in the chassis of the automobiles is considerably making more complex the manufacturing of the components that built it up. In this scenario materials with higher strengths and lower formabilities are daily faced by tool makers and component producers what reduces the process windows and makes the forming processes to be in the limits of the materials. One of the concerns that tool makers must face during the definition of the tools is the expansion ratios that the holes in the sheet may reach before producing a breakage due to the stretching of the material (also known as edge cracks). For the characterization of such limits, a standard test, the hole expansion test, can be applied so that the limits of the material are known. At the present study, hole expansion tests of a third generation steel, Fortiform1050 with a thickness of 1.2 millimeters have been carried out and compared them to a mild steel, DX54D with a thickness of 0.6 millimeters. A comparison for each material in terms of technology used to punch the hole, mechanical punching vs laser cutting has also been conducted. In addition, the measurement technique (online measurement vs offline measurement) followed in the Hole Expansion Ratio (HER) identification has also been analyzed. Finally, differences between both materials and techniques are presented.

  13. Burial Ground Expansion Hydrogeologic Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Gaughan , T.F.

    1999-02-26

    Sirrine Environmental Consultants provided technical oversight of the installation of eighteen groundwater monitoring wells and six exploratory borings around the location of the Burial Ground Expansion.

  14. Expansion patterns and parallaxes for planetary nebulae

    Science.gov (United States)

    Schönberner, D.; Balick, B.; Jacob, R.

    2018-02-01

    Aims: We aim to determine individual distances to a small number of rather round, quite regularly shaped planetary nebulae by combining their angular expansion in the plane of the sky with a spectroscopically measured expansion along the line of sight. Methods: We combined up to three epochs of Hubble Space Telescope imaging data and determined the angular proper motions of rim and shell edges and of other features. These results are combined with measured expansion speeds to determine individual distances by assuming that line of sight and sky-plane expansions are equal. We employed 1D radiation-hydrodynamics simulations of nebular evolution to correct for the difference between the spectroscopically measured expansion velocities of rim and shell and of their respective shock fronts. Results: Rim and shell are two independently expanding entities, driven by different physical mechanisms, although their model-based expansion timescales are quite similar. We derive good individual distances for 15 objects, and the main results are as follows: (i) distances derived from rim and shell agree well; (ii) comparison with the statistical distances in the literature gives reasonable agreement; (iii) our distances disagree with those derived by spectroscopic methods; (iv) central-star "plateau" luminosities range from about 2000 L⊙ to well below 10 000 L⊙, with a mean value at about 5000 L⊙, in excellent agreement with other samples of known distance (Galactic bulge, Magellanic Clouds, and K648 in the globular cluster M 15); (v) the central-star mass range is rather restricted: from about 0.53 to about 0.56 M⊙, with a mean value of 0.55 M⊙. Conclusions: The expansion measurements of nebular rim and shell edges confirm the predictions of radiation-hydrodynamics simulations and offer a reliable method for the evaluation of distances to suited objects. Results of this paper are based on observations made with the NASA/ESA Hubble Space Telescope in Cycle 16 (GO11122

  15. Longitudinal expansion of field line dipolarization

    Science.gov (United States)

    Saka, O.; Hayashi, K.

    2017-11-01

    We examine the substorm expansions that started at 1155 UT 10 August 1994 in the midnight sector focusing on the longitudinal (eastward) expansion of field line dipolarization in the auroral zone. Eastward expansion of the dipolarization region was observed in all of the H, D, and Z components. The dipolarization that started at 1155 UT (0027 MLT) from 260° of geomagnetic longitude (CMO) expanded to 351°(PBQ) in about 48 min. The expansion velocity was 0.03-0.04°/s, or 1.9 km/s at 62°N of geomagnetic latitude. The dipolarization region expanding to the east was accompanied by a bipolar event at the leading edge of the expansion in latitudes equatorward of the westward electrojet (WEJ). In the midnight sector at the onset meridian, the Magnetospheric Plasma Analyzer (MAP) on board geosynchronous satellite L9 measured electrons and ions between 10 eV and 40 keV. We conclude from the satellite observations that this dipolarization was characterized by the evolution of temperature anisotropies, an increase of the electron and ion temperatures, and a rapid change in the symmetry axis of the temperature tensor. The field line dipolarization and its longitudinal expansion were interpreted in terms of the slow MHD mode triggered by the current disruption. We propose a new magnetosphere-ionosphere coupling (MI-coupling) mechanism based on the scenario that transmitted westward electric fields from the magnetosphere in association with expanding dipolarization produced electrostatic potential (negative) in the ionosphere through differences in the mobility of collisional ions and collisionless electrons. The field-aligned currents that emerged from the negative potential region are arranged in a concentric pattern around the negative potential region, upward toward the center and downward on the peripheral.

  16. Intrinsic thermal expansion of crystal defects

    International Nuclear Information System (INIS)

    Ganne, J.-P.

    1981-02-01

    Although the phenomenon of thermal expansion has long been known, the intrinsic thermal expansion coefficient (ITEC) βsub(d) of a point defect, derived from its formation volume vsub(d), has never been measured directly. The differential dilatometer by interferometry built by ASTY and GILDER is described. It has allowed βsub(d) to be measured for several defects. Vacancies and small interstitial loops were produced in aluminium by low temperature (20 K) fast neutron irradiation followed by an anneal up to the beginning of stage III (160 K). The very high value of the measured ratio βsub(d)/β 0 (12+-4) is comparable with a lattice statics calculated (42) value (11.5 0 [fr

  17. Thermal expansion coefficient determination by CBED

    International Nuclear Information System (INIS)

    Angelini, P.; Bentley, J.

    1984-01-01

    The present application of CBED involves measurements of thermal-expansion coefficients by measurement of changes in HOLZ line positions as a function of temperature. Previous work on this subject was performed on Si at a constant accelerating voltage of 100 kV between about 90 and 600 K. Diffraction patterns were recorded and line shifts correlated to lattice parameter changes. Differences were noted between values determined by CBED and accepted thermal expansion values. Significant HOLZ line interactions and splitting occurring in the (111) patterns were noted to contribute to the differences. Preliminary measurements have been made on Al, Al 2 O 3 , and single-crystal tau (Ni/sub 20.3/Ti/sub 2.7/B 6 ). An example of changes in HOLZ lines present in (114) patterns for Al are shown and the effect of temperature on the position of lines in the pattern illustrated

  18. On summation of perturbation expansions

    International Nuclear Information System (INIS)

    Horzela, A.

    1985-04-01

    The problem of the restoration of physical quantities defined by divergent perturbation expansions is analysed. The Pad'e and Borel summability is proved for alternating perturbation expansions with factorially growing coefficients. The proof is based on the methods of the classical moments theory. 17 refs. (author)

  19. Renormalization group and mayer expansions

    International Nuclear Information System (INIS)

    Mack, G.

    1984-01-01

    Mayer expansions promise to become a powerful tool in exact renormalization group calculations. Iterated Mayer expansions were sucessfully used in the rigorous analysis of 3-dimensional U (1) lattice gauge theory by Gopfert and the author, and it is hoped that they will also be useful in the 2-dimensional nonlinear σ-model, and elsewhere

  20. Renormalization group and Mayer expansions

    International Nuclear Information System (INIS)

    Mack, G.

    1984-02-01

    Mayer expansions promise to become a powerful tool in exact renormalization group calculations. Iterated Mayer expansions were sucessfully used in the rigorous analysis of 3-dimensional U(1) lattice gauge theory by Goepfert and the author, and it is hoped that they will also be useful in the 2-dimensional nonlinear sigma-model, and elsewhere. (orig.)

  1. Exponential Expansion in Evolutionary Economics

    DEFF Research Database (Denmark)

    Frederiksen, Peter; Jagtfelt, Tue

    2013-01-01

    to this problem is proposed in the form of a model of exponential expansion. The model outlines the overall structure and function of the economy as exponential expansion. The pictographic model describes four axiomatic concepts and their exponential nature. The interactive, directional, emerging and expanding...

  2. The expansion rate and size of the universe

    CERN Multimedia

    Freedman, Wendy L

    1998-01-01

    The age, evolution and fate of the universe depend on just how fast it is expanding. By measuring the size of the universe using a variety of new techniques, astronomers have recently improved estimates of the expansion rate

  3. Thermal expansion studies on Hafnium titanate (HfTiO4)

    International Nuclear Information System (INIS)

    Panneerselvam, G.; Subramanian, G.G.S.; Antony, M.P.

    2006-01-01

    The lattice thermal expansion characteristics of hafnium titanate (HfTiO 4 ) have been studied by measuring the lattice parameter as a function of temperature by high temperature X-ray diffraction technique (HT-XRD) in the temperature range 298-1973K. Percentage linear thermal expansion and mean linear thermal expansion coefficients were computed from the lattice parameter data. The thermal expansion of HfTiO 4 is highly anisotropic. The expansivity along 'a' axis is large; as compared to the expansivity along 'b' axis which is negative below 1073 K. The percentage linear thermal expansion in the temperature range 298-1973 K along a, b and c axis are 2.74, 0.901 and 1.49 respectively. Thermal expansion values obtained in the present study are in reasonable agreement with the existing thermal expansion data. (author)

  4. Plasma expansion: fundamentals and applications

    International Nuclear Information System (INIS)

    Engeln, R; Mazouffre, S; Vankan, P; Bakker, I; Schram, D C

    2002-01-01

    The study of plasma expansion is interesting from a fundamental point of view as well as from a more applied point of view. We here give a short overview of the way properties like density, velocity and temperature behave in an expanding thermal plasma. Experimental data show that the basic phenomena of plasma expansion are to some extent similar to those of the expansion of a hot neutral gas. From the application point of view, we present first results on the use of an expanding thermal plasma in the plasma-activated catalysis of ammonia, from N 2 -H 2 mixtures

  5. Intraoperative tissue expansion in the surgical correction of craniosynostosis.

    Science.gov (United States)

    Doshier, Laura J; Fowler, Daniel; McEwan, Thomas; Baker, C Lynette; Muzaffar, Arshad R

    2015-01-01

    Wound healing complications can occur after calvarial vault expansion due to tension on the scalp flaps. To compare wound healing outcomes in patients with craniosynostosis undergoing calvarial vault expansion with and without intraoperative tissue expansion of the scalp. The present analysis was an institutional review board-approved, retrospective cohort study involving 40 consecutive patients at the University of Missouri Hospitals and Clinics (Columbia, Missouri, USA) who underwent calvarial vault expansion for nonsyndromic craniosynostosis between June 1, 2009 and June 30, 2012. Patients were divided into two sequential cohorts: the first 20 underwent calvarial vault expansion without intraoperative tissue expansion; the second 20 underwent calvarial vault expansion with intraoperative tissue expansion. The main outcome measures included presence or absence of wound healing complications (persistent scabbing or slow-healing wounds, hardware exposure, need for operative wound revision or healed but widened scars), with documented postoperative follow-up of at least three months. The primary end point was the presence of a well-healed scar; the secondary end point was the need for an operative revision. Patients in the intraoperative tissue expansion group had a higher percentage of well-healed scars (73.6%) than those in the nonexpansion group (42.1%) (P=0.0487). This difference was primarily due to scar widening in the nonexpansion group. The present study demonstrated that the use of intraoperative tissue expansion in patients with nonsyndromic craniosynostosis who underwent calvarial vault expansion resulted in a greater likelihood of a well-healed incision with a lower rate of poor scarring.

  6. Dolomite addition effects on the thermal expansion of ceramic tiles

    International Nuclear Information System (INIS)

    Marino, Luis Fernando Bruno; Boschi, Anselmo Ortega

    1997-01-01

    The thermal expansion of ceramic tiles is of greater importance in engineering applications because the ceramics are relatively brittle and cannot tolerate large internal strain imposed by thermal expansion. When ceramic bodies are produced for glazed ties the compatibility of this property of the components should be considered to avoid damage in the final products. Carbonates are an important constituent of ceramic wall-title bodies and its presence in formulations and the reactions that occur between them and other components modify body properties. The influence in expansivity by additions of calcium magnesium carbonate in a composition of wall tile bodies has been investigated. The relative content of mineralogical components was determined by X-ray diffraction and thermal expansion by dilatometric measurements. The results was indicated that with the effect of calcium-magnesium phases and porosity on thermal expansion of wall tile bodies. (author)

  7. Thermal Expansion of Vacuum Plasma Sprayed Coatings

    Science.gov (United States)

    Raj, S V.; Palczer, A. R.

    2010-01-01

    Metallic Cu-8%Cr, Cu-26%Cr, Cu-8%Cr-1%Al, NiAl and NiCrAlY monolithic coatings were fabricated by vacuum plasma spray deposition processes for thermal expansion property measurements between 293 and 1223 K. The corrected thermal expansion, (DL/L(sub 0) varies with the absolute temperature, T, as (DL/L(sub 0) = A(T - 293)(sup 3) + BIT - 293)(sup 2) + C(T - 293) + D, where, A, B, C and D are thermal, regression constants. Excellent reproducibility was observed for all of the coatings except for data obtained on the Cu-8%Cr and Cu-26%Cr coatings in the first heat-up cycle, which deviated from those determined in the subsequent cycles. This deviation is attributed to the presence of residual stresses developed during the spraying of the coatings, which are relieved after the first heat-up cycle. In the cases of Cu-8%Cr and NiAl, the thermal expansion data were observed to be reproducible for three specimens. The linear expansion data for Cu-8% Cr and Cu-26%Cr agree extremely well with rule of mixture (ROM) predictions. Comparison of the data for the Cu-8%Cr coating with literature data for Cr and Cu revealed that the thermal expansion behavior of this alloy is determined by the Cu-rich matrix. The data for NiAl and NiCrAlY are in excellent agreement with published results irrespective of composition and the methods used for processing the materials. The implications of these results on coating GRCop-84 copper alloy combustor liners for reusable launch vehicles are discussed.

  8. Thermal expansion of carbon-carbonic composite materials

    International Nuclear Information System (INIS)

    Lukina, Eh.Yu.; Kolesnikov, S.A.; Pechik, V.K.

    1977-01-01

    Carbon-carbon composites present a high anisotropy of thermal expansion; along the fibers, the anisotropy is a function mainly of the thermal expansion of the fibers, and at right angle to the predominant orientation of the fibers, of the thermal expansion of the binder. The value of the volumetric coefficient of thermal expansion of carbon-carbon composites is lower than that of polycrystalline graphites. The binder the nearest to the fibers in value of the thermal expansion is pyrocarbon. The carbon fibers and the composites based on the latter irreversibly change their dimensions when heated to temperature above that of their formation. The coefficient of thermal expansion of composites based on finely divided fibers increases with the density of binding, but the anisotropy of thermal expansion then diminishes; the coefficient of thermal expansion of composites based on the continuous carbon fibers increases with the angle between the direction of fibers and that of the measurement, the value of the coefficient varying from negative values characteristic of highly oriented carbon materials to a value of (7-8) x 10 -6 degree -1

  9. Estimates of expansion time scales

    International Nuclear Information System (INIS)

    Jones, E.M.

    1979-01-01

    Monte Carlo simulations of the expansion of a spacefaring civilization show that descendants of that civilization should be found near virtually every useful star in the Galaxy in a time much less than the current age of the Galaxy. Only extreme assumptions about local population growth rates, emigration rates, or ship ranges can slow or halt an expansion. The apparent absence of extraterrestrials from the solar system suggests that no such civilization has arisen in the Galaxy. 1 figure

  10. Expansion lyre-shaped tube

    International Nuclear Information System (INIS)

    Andro, Jean.

    1973-01-01

    The invention relates the expansion lyre-shaped tube portions formed in dudgeoned tubular bundles between two bottom plates. An expansion lyre comprises at least two sets of tubes of unequal lengths coplanar and symmetrical with respect to the main tube axis, with connecting portions between the tubes forming said sets. The invention applies to apparatus such as heat exchangers, heaters, superheaters or breeders [fr

  11. Strategic Complexity and Global Expansion

    DEFF Research Database (Denmark)

    Oladottir, Asta Dis; Hobdari, Bersant; Papanastassiou, Marina

    2012-01-01

    The purpose of this paper is to analyse the determinants of global expansion strategies of newcomer Multinational Corporations (MNCs) by focusing on Iceland, Israel and Ireland. We argue that newcomer MNCs from small open economies pursue complex global expansion strategies (CGES). We distinguish....... The empirical evidence suggests that newcomer MNCs move away from simplistic dualities in the formulation of their strategic choices towards more complex options as a means of maintaining and enhancing their global competitiveness....

  12. Method to determine the thermal expansion of epoxies, inorganic cements and polyester resins at cryogenic temperatures

    International Nuclear Information System (INIS)

    Sereinig, W.; Gross, F.

    1982-01-01

    An apparatus for measuring the integral thermal expansions at cryogenic temperatures is described. The thermal expansions are given for a number of commercial epoxy resins, commercial polyester resins and inorganic cements. A method to reduce the thermal expansion of the resins by the use of quartz powder fillers is reported. (author)

  13. Relationship between PC index and magnetospheric field-aligned currents measured by Swarm satellites

    Science.gov (United States)

    Troshichev, O.; Sormakov, D.; Behlke, R.

    2018-03-01

    The relationship between the magnetospheric field-aligned currents (FAC) monitored by the Swarm satellites and the magnetic activity PC index (which is a proxy of the solar wind energy incoming into the magnetosphere) is examined. It is shown that current intensities measured in the R1 and R2 FAC layers at the poleward and equtorward boundaries of the auroral oval are well correlated, the R2 currents being evidently secondary in relation to R1 currents and correlation in the dawn and dusk oval sectors being better than in the noon and night sectors. There is evident relationship between the PC index and the intensity of field-aligned currents in the R1 dawn and dusk layers: increase of FAC intensity in the course of substorm development is accompanied by increasing the PC index values. Correlation between PC and FAC intensities in the R2 dawn and dusk layers is also observed, but it is much weaker. No correlation is observed between PC and field-aligned currents in the midnight as well as in the noon sectors ahead of the substorm expansion phase. The results are indicative of the R1 field-aligned currents as a driver of the polar cap magnetic activity (PC index) and currents in the R2 layer.

  14. 6th International Symposium on Thermal Expansion

    CERN Document Server

    1978-01-01

    This 6th International Symposium on Thermal Expansion, the first outside the USA, was held on August 29-31, 1977 at the Gull Harbour Resort on Hecla Island, Manitoba, Canada. Symposium Chairman was Ian D. Peggs, Atomic Energy of Canada Limited, and our continuing sponsor was CINDAS/Purdue University. We made considerable efforts to broaden the base this year to include more users of expansion data but with little success. We were successful, however, in establishing a session on liquids, an area which is receiving more attention as a logical extension to the high-speed thermophysical property measurements on materials at temperatures close to their melting points. The Symposium had good international representation but the overall attendance was, disappointingly, relatively low. Neverthe­ less, this enhanced the informal atmosphere throughout the meeting with a resultant frank exchange of information and ideas which all attendees appreciated. A totally new item this year was the presentation of a bursary to ...

  15. Thermal expansion of UO2 and simulated DUPIC fuel

    International Nuclear Information System (INIS)

    Ho Kang, Kweon; Jin Ryu, Ho; Chan Song, Kee; Seung Yang, Myung

    2002-01-01

    The lattice parameters of simulated DUPIC fuel and UO 2 were measured from room temperature to 1273 K using neutron diffraction to investigate the thermal expansion and density variation with temperature. The lattice parameter of simulated DUPIC fuel is lower than that of UO 2 , and the linear thermal expansion of simulated DUPIC fuel is higher than that of UO 2 . For the temperature range from 298 to 1273 K, the average linear thermal expansion coefficients for UO 2 and simulated DUPIC fuel are 10.471x10 -6 and 10.751x10 -6 K -1 , respectively

  16. Thermal expansion study of simulated DUPIC fuel using neutron diffraction

    International Nuclear Information System (INIS)

    Kang, Kweon Ho; Ryu, H. J.; Bae, J. H.; Kim, H. S.; Song, K. C.; Yang, M. S.; Choi, Y. N.; Han, Y. S.; Oh, H. S.

    2001-07-01

    The lattice parameters of simulated DUPIC fuel and UO2 were measured from room temperature to 1273 K using neutron diffraction to investigate the thermal expansion and density variation with temperature. The lattice parameter of simulated DUPIC fuel is lower than that of UO2 and the linear thermal expansion of simulated DUPIC fuel is higher than that of UO2. For the temperature range from 298 to 1273 K, the average linear thermal expansion coefficients for UO2 and simulated DUPIC fuel are 10.471 ''10-6 and 10.751 ''10-6 K-1, respectively

  17. On genus expansion of superpolynomials

    Science.gov (United States)

    Mironov, Andrei; Morozov, Alexei; Sleptsov, Alexei; Smirnov, Andrey

    2014-12-01

    Recently it was shown that the (Ooguri-Vafa) generating function of HOMFLY polynomials is the Hurwitz partition function, i.e. that the dependence of the HOMFLY polynomials on representation R is naturally captured by symmetric group characters (cut-and-join eigenvalues). The genus expansion and expansion through Vassiliev invariants explicitly demonstrate this phenomenon. In the present paper we claim that the superpolynomials are not functions of such a type: symmetric group characters do not provide an adequate linear basis for their expansions. Deformation to superpolynomials is, however, straightforward in the multiplicative basis: the Casimir operators are β-deformed to Hamiltonians of the Calogero-Moser-Sutherland system. Applying this trick to the genus and Vassiliev expansions, we observe that the deformation is fully straightforward only for the thin knots. Beyond the family of thin knots additional algebraically independent terms appear in the Vassiliev and genus expansions. This can suggest that the superpolynomials do in fact contain more information about knots than the colored HOMFLY and Kauffman polynomials. However, even for the thin knots the beta-deformation is non-innocent: already in the simplest examples it seems inconsistent with the positivity of colored superpolynomials in non-(anti)symmetric representations, which also happens in I. Cherednik's (DAHA-based) approach to the torus knots.

  18. On genus expansion of superpolynomials

    International Nuclear Information System (INIS)

    Mironov, Andrei; Morozov, Alexei; Sleptsov, Alexei; Smirnov, Andrey

    2014-01-01

    Recently it was shown that the (Ooguri–Vafa) generating function of HOMFLY polynomials is the Hurwitz partition function, i.e. that the dependence of the HOMFLY polynomials on representation R is naturally captured by symmetric group characters (cut-and-join eigenvalues). The genus expansion and expansion through Vassiliev invariants explicitly demonstrate this phenomenon. In the present paper we claim that the superpolynomials are not functions of such a type: symmetric group characters do not provide an adequate linear basis for their expansions. Deformation to superpolynomials is, however, straightforward in the multiplicative basis: the Casimir operators are β-deformed to Hamiltonians of the Calogero–Moser–Sutherland system. Applying this trick to the genus and Vassiliev expansions, we observe that the deformation is fully straightforward only for the thin knots. Beyond the family of thin knots additional algebraically independent terms appear in the Vassiliev and genus expansions. This can suggest that the superpolynomials do in fact contain more information about knots than the colored HOMFLY and Kauffman polynomials. However, even for the thin knots the beta-deformation is non-innocent: already in the simplest examples it seems inconsistent with the positivity of colored superpolynomials in non-(anti)symmetric representations, which also happens in I. Cherednik's (DAHA-based) approach to the torus knots

  19. Oxygen stoichiometry and chemical expansion of Ba0.5Sr0.5Co0.8Fe0.2O3-d measured by in-situ neutron diffraction

    NARCIS (Netherlands)

    McIntosh, S.; McIntosh, Steven; Vente, Jaap F.; Haije, Wim G.; Blank, David H.A.; Bouwmeester, Henricus J.M.

    2006-01-01

    The structure, oxygen stoichiometry, and chemical and thermal expansion of Ba0.5Sr0.5Co0.8Fe0.2O3-ä (BSCF) between 873 and 1173 K and oxygen partial pressures of 1 10-3 to 1 atm were determined by in situ neutron diffraction. BSCF has a cubic perovskite structure, space group Pm3hm, across the whole

  20. Low thermal expansion glass ceramics

    CERN Document Server

    1995-01-01

    This book is one of a series reporting on international research and development activities conducted by the Schott group of companies With the series, Schott aims to provide an overview of its activities for scientists, engineers, and managers from all branches of industry worldwide where glasses and glass ceramics are of interest Each volume begins with a chapter providing a general idea of the current problems, results, and trends relating to the subjects treated This volume describes the fundamental principles, the manufacturing process, and applications of low thermal expansion glass ceramics The composition, structure, and stability of polycrystalline materials having a low thermal expansion are described, and it is shown how low thermal expansion glass ceramics can be manufactured from appropriately chosen glass compositions Examples illustrate the formation of this type of glass ceramic by utilizing normal production processes together with controlled crystallization Thus glass ceramics with thermal c...

  1. Differential expansion for link polynomials

    Science.gov (United States)

    Bai, C.; Jiang, J.; Liang, J.; Mironov, A.; Morozov, A.; Morozov, An.; Sleptsov, A.

    2018-03-01

    The differential expansion is one of the key structures reflecting group theory properties of colored knot polynomials, which also becomes an important tool for evaluation of non-trivial Racah matrices. This makes highly desirable its extension from knots to links, which, however, requires knowledge of the 6j-symbols, at least, for the simplest triples of non-coincident representations. Based on the recent achievements in this direction, we conjecture a shape of the differential expansion for symmetrically-colored links and provide a set of examples. Within this study, we use a special framing that is an unusual extension of the topological framing from knots to links. In the particular cases of Whitehead and Borromean rings links, the differential expansions are different from the previously discovered.

  2. Expansion-based passive ranging

    Science.gov (United States)

    Barniv, Yair

    1993-01-01

    This paper describes a new technique of passive ranging which is based on utilizing the image-plane expansion experienced by every object as its distance from the sensor decreases. This technique belongs in the feature/object-based family. The motion and shape of a small window, assumed to be fully contained inside the boundaries of some object, is approximated by an affine transformation. The parameters of the transformation matrix are derived by initially comparing successive images, and progressively increasing the image time separation so as to achieve much larger triangulation baseline than currently possible. Depth is directly derived from the expansion part of the transformation. To a first approximation, image-plane expansion is independent of image-plane location with respect to the focus of expansion (FOE) and of platform maneuvers. Thus, an expansion-based method has the potential of providing a reliable range in the difficult image area around the FOE. In areas far from the FOE the shift parameters of the affine transformation can provide more accurate depth information than the expansion alone, and can thus be used similarly to the way they have been used in conjunction with the Inertial Navigation Unit (INU) and Kalman filtering. However, the performance of a shift-based algorithm, when the shifts are derived from the affine transformation, would be much improved compared to current algorithms because the shifts--as well as the other parameters--can be obtained between widely separated images. Thus, the main advantage of this new approach is that, allowing the tracked window to expand and rotate, in addition to moving laterally, enables one to correlate images over a very long time span which, in turn, translates into a large spatial baseline resulting in a proportionately higher depth accuracy.

  3. Relativistic effects on plasma expansion

    Energy Technology Data Exchange (ETDEWEB)

    Benkhelifa, El-Amine; Djebli, Mourad, E-mail: mdjebli@usthb.dz [USTHB, Faculty of Physics, Theoretical Physics Laboratory, B.P. 32 Bab-Ezzouar, 16079 Algiers (Algeria)

    2014-07-15

    The expansion of electron-ion plasma is studied through a fully relativistic multi-fluids plasma model which includes thermal pressure, ambipolar electrostatic potential, and internal energy conversion. Numerical investigation, based on quasi-neutral assumption, is performed for three different regimes: nonrelativistic, weakly relativistic, and relativistic. Ions' front in weakly relativistic regime exhibits spiky structure associated with a break-down of quasi-neutrality at the expanding front. In the relativistic regime, ion velocity is found to reach a saturation limit which occurs at earlier stages of the expansion. This limit is enhanced by higher electron velocity.

  4. Hematoma Expansion is Common after Spontaneous Intracerebral Hemorrhage in Children

    Science.gov (United States)

    Beslow, Lauren A.; Ichord, Rebecca N.; Gindville, Melissa C.; Kleinman, Jonathan T.; Bastian, Rachel A.; Smith, Sabrina E.; Licht, Daniel J.; Hillis, Argye E.; Jordan, Lori C.

    2013-01-01

    Importance Hematoma expansion is the only modifiable predictor of outcome in adult intracerebral hemorrhage; however, the frequency and clinical significance of hematoma expansion after childhood intracerebral hemorrhage are unknown. Objective To assess the frequency and extent of hematoma expansion in children with non-traumatic intracerebral hemorrhage. Design Prospective cohort study. Setting Three tertiary care pediatric hospitals. Participants Children (≥37 weeks gestation-18 years) with non-traumatic intracerebral hemorrhage were enrolled in a three-center prospective observational study from 2007–2012 focused on predictors of outcome. For this planned sub-study of hematoma expansion, neonates ≤28 days and participants with isolated intraventricular hemorrhage were excluded. Children with two head CTs within 48 hours were evaluated for hematoma expansion and were compared to children with only one head CT. Consent for the primary cohort was obtained from 73 of 87 eligible subjects (84%); 41 of 73 children enrolled in the primary cohort met all inclusion/exclusion criteria for this sub-study in whom 22 had two head CTs obtained within 48 hours that could be evaluated for hematoma expansion. Within our sub-study cohort, 21/41 (51%) were male, 25/41 (61%) were white, 16/25 (39%) were black, and median age was 7.7 years (interquartile range 2.0–13.4 years). Main Outcome Measure Primary outcome was prevalence of hematoma expansion. Results Of 73 children, 41 (56%) met inclusion criteria, and 22 (30%) had 2 head CTs to evaluate expansion. Among these 22 children, median time from symptom onset to first CT was two hours (interquartile range 1.3–6.5 hours). Median baseline hemorrhage volume was 19.5mL, 1.6% of brain volume. Hematoma expansion occurred in (7/22) 32%. Median expansion was 4mL (interquartile range 1–11mL). Three children had significant (>33%) expansion; two required urgent hematoma evacuation. Expansion was not associated with poorer

  5. Removable Type Expansion Bolt Innovative Design

    Science.gov (United States)

    Wang, Feng-Lan; Zhang, Bo; Gao, Bo; Liu, Yan-Xin; Gao, Bo

    2016-05-01

    Expansion bolt is a kind of the most common things in our daily life. Currently, there are many kinds of expansion bolts in the market. However, they have some shortcomings that mainly contain underuse and unremovement but our innovation of design makes up for these shortcomings very well. Principle of working follows this: expansion tube is fixed outside of bolt, steel balls and expansion covers are fixed inside. Meanwhile, the steel balls have 120° with each other. When using it ,expansion cover is moved in the direction of its internal part. So the front part of expansion bolt cover is increasingly becoming big and steel halls is moved outside. Only in this way can it be fixed that steel balls make expansion tube expand. When removing them, expansion bolt is moved outside. So the front part of expansion bolt cover is gradually becoming small and steel balls moves inside, after expansion tube shrinks, we can detach them.

  6. The interplay of internal and forced modes of Hadley Cell expansion: lessons from the global warming hiatus

    Science.gov (United States)

    Amaya, Dillon J.; Siler, Nicholas; Xie, Shang-Ping; Miller, Arthur J.

    2017-09-01

    The poleward branches of the Hadley Cells and the edge of the tropics show a robust poleward shift during the satellite era, leading to concerns over the possible encroachment of the globe's subtropical dry zones into currently temperate climates. The extent to which this trend is caused by anthropogenic forcing versus internal variability remains the subject of considerable debate. In this study, we use a Joint EOF method to identify two distinct modes of tropical width variability: (1) an anthropogenically-forced mode, which we identify using a 20-member simulation of the historical climate, and (2) an internal mode, which we identify using a 1000-year pre-industrial control simulation. The forced mode is found to be closely related to the top of the atmosphere radiative imbalance and exhibits a long-term trend since 1860, while the internal mode is essentially indistinguishable from the El Niño Southern Oscillation. Together these two modes explain an average of 70% of the interannual variability seen in model "edge indices" over the historical period. Since 1980, the superposition of forced and internal modes has resulted in a period of accelerated Hadley Cell expansion and decelerated global warming (i.e., the "hiatus"). A comparison of the change in these modes since 1980 indicates that by 2013 the signal has emerged above the noise of internal variability in the Southern Hemisphere, but not in the Northern Hemisphere, with the latter also exhibiting strong zonal asymmetry, particularly in the North Atlantic. Our results highlight the important interplay of internal and forced modes of tropical width change and improve our understanding of the interannual variability and long-term trend seen in observations.

  7. The Interplay of Internal and Forced Modes of Hadley Cell Expansion: Lessons from the Global Warming Hiatus

    Science.gov (United States)

    Amaya, D. J.; Siler, N.; Xie, S. P.; Miller, A. J.

    2017-12-01

    The poleward branches of the Hadley Cells show a robust shift poleward shift during the satellite era, leading to concerns over the possible encroachment of the globe's subtropical dry zones into currently temperate climates. The extent to which this trend is caused by anthropogenic forcing versus internal variability remains the subject of considerable debate. In this study, we us a joint EOF method to identify two distinct modes of Hadley Cell variability: (i) an anthropogenically-forced mode, which we identify using a 20-member simulation of the historical climate, and (ii) an internal mode, which identify using a 1000-year pre-industrial control simulation with a global climate model. The forced mode is found to be closely related to the TOA radiative imbalance and exhibits a long-term trend since 1860, while the internal mode is found to be essentially indistinguishable from the El Niño Southern Oscillation (ENSO). Together these two modes explain an average of 70% of the interannual variability seen in model "edge indices" over the historical period. Since 1980, the superposition of forced and internal modes has resulted in a period of accelerated Hadley Cell expansion and decelerated global warming (i.e., the "hiatus"). A comparison of the change in these modes since 1980 indicates that by 2013 the signal has emerged above the noise of internal variability in the Southern Hemisphere (SH), but not in the Northern Hemisphere (NH), with the latter also exhibiting strong zonal asymmetry, particularly in the North Atlantic. Our results highlight the important interplay of internal and forced modes of Hadley Cell width change and improve our understanding of the interannual variability and long-term trend seen in observations.

  8. French Expansion in North America.

    Science.gov (United States)

    Jaenen, Cornelius J.

    2001-01-01

    Explores the French colonization in North America. Presents background information on New France, focusing on the French in Canada. Covers topics, such as how the French became interested in North American expansion, the French in Louisiana, colonial economics, and the reasons for the collapse of New France. Includes a bibliography. (CMK)

  9. Regulation of gas infrastructure expansion

    NARCIS (Netherlands)

    De Joode, J.

    2012-01-01

    The topic of this dissertation is the regulation of gas infrastructure expansion in the European Union (EU). While the gas market has been liberalised, the gas infrastructure has largely remained in the regulated domain. However, not necessarily all gas infrastructure facilities – such as gas

  10. On Fourier re-expansions

    OpenAIRE

    Liflyand, E.

    2012-01-01

    We study an extension to Fourier transforms of the old problem on absolute convergence of the re-expansion in the sine (cosine) Fourier series of an absolutely convergent cosine (sine) Fourier series. The results are obtained by revealing certain relations between the Fourier transforms and their Hilbert transforms.

  11. Multiscale expansions in discrete world

    Indian Academy of Sciences (India)

    Multiscale expansions in discrete world. ÖMER ÜNSAL, FILIZ TASCAN. ∗ and MEHMET NACI ÖZER. Eskisehir Osmangazi University, Art-Science Faculty, Department of Mathematics and Computer. Sciences, Eskisehir-Türkiye. ∗. Corresponding author. E-mail: ftascan@ogu.edu.tr. MS received 12 April 2013; accepted 16 ...

  12. Multiscale expansions in discrete world

    Indian Academy of Sciences (India)

    ... multiscale expansions discretely. The power of this manageable method is confirmed by applying it to two selected nonlinear Schrödinger evolution equations. This approach can also be applied to other nonlinear discrete evolution equations. All the computations have been made with Maple computer packet program.

  13. Multiscale expansions in discrete world

    Indian Academy of Sciences (India)

    This approach can also be applied to other nonlinear discrete evolution equations. All the computations have been made with Maple computer packet program. Keywords. Multiscale expansion; discrete evolution equation; modified nonlinear Schrödinger equation; third-order nonlinear Schrödinger equation; KdV equation.

  14. Glass transition and thermal expansivity of polystyrene thin films

    International Nuclear Information System (INIS)

    Inoue, R.; Kanaya, T.; Miyazaki, T.; Nishida, K.; Tsukushi, I.; Shibata, K.

    2006-01-01

    We have studied glass transition temperature and thermal expansivity of polystyrene thin films supported on silicon substrate using X-ray reflectivity and inelastic neutron scattering techniques. In annealing experiments, we have found that the reported apparent negative expansivity of polymer thin films is caused by unrelaxed structure due to insufficient annealing. Using well-annealed films, we have evaluated glass transition temperature T g and thermal expansivity as a function of film thickness. The glass transition temperature decreases with film thickness and is constant below about 10 nm, suggesting the surface glass transition temperature of 355 K, which is lower than that in bulk. We have also found that the thermal expansivity in the glassy state decreases with film thickness even after annealing. The decrease has been attributed to hardening of harmonic force constant arising from chain confinement in a thin film. This idea has been confirmed in the inelastic neutron scattering measurements

  15. Glass transition and thermal expansivity of polystyrene thin films

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, R. [Institute for Chemical Research, Kyoto University, Uji, Kyoto-fu 611-0011 (Japan); Kanaya, T. [Institute for Chemical Research, Kyoto University, Uji, Kyoto-fu 611-0011 (Japan)]. E-mail: kanaya@scl.kyoto-u.ac.jp; Miyazaki, T. [Nitto Denko Corporation, 1-1-2 Shimohozumi, Ibaraki, Osaka-fu 567-8680 (Japan); Nishida, K. [Institute for Chemical Research, Kyoto University, Uji, Kyoto-fu 611-0011 (Japan); Tsukushi, I. [Chiba Institute of Technology, Narashino, Chiba-ken 275-0023 (Japan); Shibata, K. [Japan Atomic Energy Research Institute, Tokai, Ibaraki-ken 319-1195 (Japan)

    2006-12-20

    We have studied glass transition temperature and thermal expansivity of polystyrene thin films supported on silicon substrate using X-ray reflectivity and inelastic neutron scattering techniques. In annealing experiments, we have found that the reported apparent negative expansivity of polymer thin films is caused by unrelaxed structure due to insufficient annealing. Using well-annealed films, we have evaluated glass transition temperature T {sub g} and thermal expansivity as a function of film thickness. The glass transition temperature decreases with film thickness and is constant below about 10 nm, suggesting the surface glass transition temperature of 355 K, which is lower than that in bulk. We have also found that the thermal expansivity in the glassy state decreases with film thickness even after annealing. The decrease has been attributed to hardening of harmonic force constant arising from chain confinement in a thin film. This idea has been confirmed in the inelastic neutron scattering measurements.

  16. Vibrational population distributions in nonequilibrium nozzle expansion flows

    Science.gov (United States)

    Watt, W. S.; Rich, J. W.

    1971-01-01

    Experimental measurements and theoretical calculations of the vibrational population distribution in nonequilibrium nozzle expansion flows of gas mixtures are reported. These studies were directed toward determining whether vibrational energy exchange pumping could lead to laser action on the vibrational bands of a diatomic molecule. Three different types of experiments were conducted. These showed (1) that vibrational energy was preferentially transferred from N2 to CO in supersonic nozzle flows containing these gases; (2) that under some conditions this vibrational energy exchange pumping mechanism created population inversions in the vibrational levels of CO; and (3) that at large expansion ratios the magnitude of these population inversions was sufficient to sustain lasing in the nozzle. A theoretical model was developed to calculate vibrational state population distributions in gas dynamic expansions of a mixture of diatomic gases. Although only isothermal calculations have been completed, these data indicate that population inversions are predicted for conditions similar to those obtained in the nozzle expansion flows.

  17. Thermal expansion data of (Th,U)O2 fuels

    International Nuclear Information System (INIS)

    Sengupta, A.K.; Banerjee, J.; Bhagat, R.K.; Ramachandran, R.; Majumdar, S.; Purushotham, D.S.C.

    2000-04-01

    Thermal expansion data for sintered ThO 2 and ThO 2 containing 2, 4, 6, 10 and 20% UO 2 pellets were measured using a high temperature dilatometer in the temperature range from ambient to 1773 K. The dilatometer was first calibrated using a standard graphite sample as reference material. The reproducibility of the dilatometer was tested by measuring the coefficient of expansion of tungsten (NBS SRM 737) and comparing the data with that recommended by National Bureau of Standard. It was observed that there is close agreement between the experimental and reported data. The coefficient of expansion data of (Th,U)O 2 fuel indicate that out of all the six compositions, ThO 2 +2%UO 2 showed the maximum expansion of around 1.75% at 1773 K. However, the expansion data for all the compositions were very close to each other. Empirical equation correlating thermal expansion and temperature for all six compositions have been generated and reported. (author)

  18. Effect of hygroscopic expansion of resin filling on interfacial gap and sealing: a confocal microscopy study.

    Science.gov (United States)

    Rosales-Leal, Juan I; Castillo-Salmerón, Ramón Del; Molino-Serrano, María A; González-Moreira, Humberto; Cabrerizo-Vílchez, Miguel A

    2013-10-01

    To measure dimensional changes due to hygroscopic expansion and their effect on interface gaps and sealing in four light-cured restorative materials using an original confocal microscopic methodology. The materials tested were an ormocer (Admira [Voco]), a compomer (Dyract AP [Dentsply]), a hybrid composite (Spectrum [Dentsply]), and a nanohybrid composite (Esthet·X [Dentsply]). Water sorption was evaluated by weighing material disks after immersion. Hygroscopic expansion was measured from volumetric variations of material fillings in cylindrical cavities in dentin slices; the interfacial gap size was obtained from the same cavities using a novel confocal microscopic method. Microleakage was evaluated in cavities prepared in extracted third molars. Measurements followed water immersion for 24 h, 1 week, 4 weeks, and 8 weeks. A factorial ANOVA, the Student Newman Keuls test for post-hoc comparisons, the Student's t-test, and the Pearson test were used for the statistical analysis (p hygroscopic expansion, and sealing. Hygroscopic expansion reduced post-polymerization interfacial gaps and improved cavity sealing. Dyract AP and Admira showed the highest water sorption, hygroscopic expansion, and gap size reduction. 1. The proposed methodology is valid to measure hygroscopic expansion and interfacial gap. 2. Water sorption and hygroscopic expansion are positively correlated, and hygroscopic expansion, gap size, and sealing are also positively correlated. 3. The adhesive influences the interfacial gap size and its variation after hygroscopic expansion. 4. Hygroscopic expansion reduces the interfacial gaps generated by polymerization shrinkage and improves cavity sealing.

  19. Surgical Splint Design Influences Transverse Expansion in Segmental Maxillary Osteotomies

    DEFF Research Database (Denmark)

    Stokbro, Kasper; Aagaard, Esben; Torkov, Peter

    2017-01-01

    splint designs on achieving the planned transverse expansion in bimaxillary surgery with segmental maxillary procedures. Materials and Methods: Forty-two participants were included in a retrospective observational study. All participants had completed virtually planned bimaxillary surgery with 3-piece....... To test measurement reliability, all measurements were performed twice by the same observer. The primary predictor variable was the planned expansion according to the virtual surgical plan. The primary covariate with influence on the obtained expansion was the surgical splint design. Other covariates...... of interest included patient age, patient gender, and surgeon. Descriptive and bivariate statistics were performed using Student t tests and linear regression analysis. Results: Measurements showed high reliability, with an intraclass correlation coefficient of 0.99 and Bland-Altman plots without systematic...

  20. Low temperature thermal expansion of liquid Helium-4

    International Nuclear Information System (INIS)

    Berthold, J.E.

    1976-01-01

    Results of a measurement of the thermal expansion of liquid He-4 are presented along the saturated vapor pressure curve at low temperatures (0.1 - 0.6 0 K). The thermal expansion is related to the low momentum region of the He-4 excitation spectrum, and the results of this measurement are analyzed to gain information concerning deviations from linearity in the phonon region of the spectrum. The data is also compared with theoretical predictions of Alrich and Bhatt and McMillan and with the thermal expansion measurement of Van Degrift. In addition a discussion of previous experimental evidence on the shape of the low momentum region of the dispersion relation is presented

  1. Pathway and conversion of energy incident on auroral and sub-auroral ionosphere at substorm expansion onset

    Science.gov (United States)

    Ebihara, Y.; Tanaka, T.

    2017-12-01

    One explanation for SAPS/SAID is the poleward ionospheric electric field arising from a pair of Region 1 and Region 2 field-aligned currents (FACs). At substorm expansion onset, the FACs are intensified, resulting in intensification of energy incident on the auroral and sub-auroral ionosphere. Where does the energy comes from? Based on the results obtained by the global magnetohydrodynamics (MHD) simulation, we present energy flow and energy conversion associated with the Region 1 and Region 2 FACs that are intensified at the onset of substorm expansion. The cusp/mantle region transmits electromagnetic energy to almost the entire region of the magnetosphere. A part of electromagnetic energy is stored in the lobe in the growth phase. When reconnection takes place in the near-Earth tail region, the stored energy is released in addition to the continuously supplied one from the cusp/mantle dynamo. Two types of pathways of energy seem to be involved in the generation of the near-Earth dynamo that is associated with FACs at the expansion onset. The first type is related to the earthward fast flow in the plasma sheet. The electromagnetic energy coming from the lobe splits into the thermal energy and the kinetic energy. The kinetic energy is then converted to the thermal energy and the electromagnetic energy, in association of flow braking. The second type is that the plasma coming from the lobe goes into the inner magnetosphere directly. The electromagnetic energy is converted to the thermal energy, followed by the electromagnetic energy at off-equator. The near-Earth dynamo region seems to be embedded in the magnetospheric convection system. In this sense, the expansion onset may be regarded as a sudden, local intensification of the convection.

  2. Linear thermal expansion coefficient (at temperatures from 130 to 800 K) of borosilicate glasses applicable for coupling with silicon in microelectronics

    OpenAIRE

    Sinev, Leonid S.; Petrov, Ivan D.

    2017-01-01

    Processing results of measurements of linear thermal expansion coefficients and linear thermal expansion of two brands of borosilicate glasses --- LK5 and Borofloat 33 --- are presented. The linear thermal expansion of glass samples have been determined in the temperature range 130 to 800 K (minus 143 to 526 $\\deg$C) using thermomechanical analyzer TMA7100. Relative imprecision of indirectly measured linear thermal expansion coefficients and linear thermal expansion of both glass brands is le...

  3. Micrografts: the "super" expansion graft.

    Science.gov (United States)

    Mardovin, W; Miller, S F; Eppinger, M; Finley, R K

    1992-01-01

    A novel technique for producing micronized skin grafts that was introduced in a paper presented at the 1990 ABA meeting was evaluated to quantify maximum expansion. Twenty Sprague-Dawley rats were divided into two groups representing 10:1 and 25:1 expanded micrograft ratios, respectively. Grafted sites in both groups were shown to heal better than those of the control group, and both grafted groups showed comparable healing at day 10.

  4. RELIABILITY OF LENTICULAR EXPANSION COMPENSATORS

    Directory of Open Access Journals (Sweden)

    Gabriel BURLACU,

    2011-11-01

    Full Text Available Axial lenticular compensators are made to take over the longitudinal heat expansion, shock , vibration and noise, made elastic connections for piping systems. In order to have a long life for installations it is necessary that all elements, including lenticular compensators, have a good reliability. This desire can be did by technology of manufactoring and assembly of compensators, the material for lenses and by maintenance.of compensator

  5. The relevance of grid expansion under zonal markets

    International Nuclear Information System (INIS)

    Bertsch, Joachim; Hagspiel, Simeon; Just, Lisa

    2015-01-01

    The European electricity market design is based on zonal markets with uniform prices. Locational price signals within these zones - necessary to ensure long-term efficiency - are not provided. Specifically, if intra-zonal congestion occurs due to missing grid expansion, the market design is revealed as inherently incomplete. This might lead to severe, unwanted distortions of the electricity market, both in the short- and in the long-term. In this paper, we study these distortions with a specific focus on the impact of restricted grid expansion under zonal markets. For this, we use a long term fundamental dispatch and investment model of the European electricity system and gradually restrict the allowed expansion of the transmission grid per decade. We find that the combination of an incomplete market design and restricted grid expansion leads to a misallocation of generation capacities and the inability to transport electricity to where it is needed. Consequences are severe and lead to load curtailment of up to 2-3 %. Moreover, missing grid expansion makes it difficult and costly to reach envisaged energy targets in the power sector. Hence, we argue that in the likely event of restricted grid expansion, either administrative measures or - presumably more efficient - an adaptation of the current market design to include locational signals will become necessary.

  6. Pulsed flows at the high-altitude cusp poleward boundary, and associated ionospheric convection and particle signatures, during a Cluster - FAST - SuperDARN- Søndrestrøm conjunction under a southwest IMF

    Directory of Open Access Journals (Sweden)

    C. J. Farrugia

    2004-09-01

    Full Text Available Particle and magnetic field observations during a magnetic conjunction Cluster 1-FAST-Søndrestrøm within the field of view of SuperDARN radars on 21 January 2001 allow us to draw a detailed, comprehensive and self-consistent picture at three heights of signatures associated with transient reconnection under a steady south-westerly IMF (clock angle ≈130°. Cluster 1 was outbound through the high altitude (~12RE exterior northern cusp tailward of the bifurcation line (geomagnetic Bx>0 when a solar wind dynamic pressure release shifted the spacecraft into a boundary layer downstream of the cusp. The centerpiece of the investigation is a series of flow bursts observed there by the spacecraft, which were accompanied by strong field perturbations and tailward flow deflections. Analysis shows these to be Alfvén waves. We interpret these flow events as being due to a sequence of reconnected flux tubes, with field-aligned currents in the associated Alfvén waves carrying stresses to the underlying ionosphere, a view strengthened by the other observations. At the magnetic footprint of the region of Cluster flow bursts, FAST observed an ion energy-latitude disperison of the stepped cusp type, with individual cusp ion steps corresponding to individual flow bursts. Simultaneously, the SuperDARN Stokkseyri radar observed very strong poleward-moving radar auroral forms (PMRAFs which were conjugate to the flow bursts at Cluster. FAST was traversing these PMRAFs when it observed the cusp ion steps. The Søndrestrøm radar observed pulsed ionospheric flows (PIFs just poleward of the convection reversal boundary. As at Cluster, the flow was eastward (tailward, implying a coherent eastward (tailward motion of the hypothesized open flux tubes. The joint Søndrestrøm and FAST observations indicate that the open/closed field line boundary was equatorward of the convection reversal boundary by ~2°. The unprecedented accuracy of the conjunction argues strongly

  7. Rose bush leaf and internode expansion dynamics: analysis and development of a model capturing interplant variability

    Directory of Open Access Journals (Sweden)

    Sabine eDemotes-Mainard

    2013-10-01

    Full Text Available Bush rose architecture, among other factors, such as plant health, determines plant visual quality. The commercial product is the individual plant and interplant variability may be high within a crop. Thus, both mean plant architecture and interplant variability should be studied. Expansion is an important feature of architecture, but it has been little studied at the level of individual organs in bush roses. We investigated the expansion kinetics of primary shoot organs, to develop a model reproducing the organ expansion of real crops from non destructive input variables. We took interplant variability in expansion kinetics and the model’s ability to simulate this variability into account. Changes in leaflet and internode dimensions over thermal time were recorded for primary shoot expansion, on 83 plants from three crops grown in different climatic conditions and densities. An empirical model was developed, to reproduce organ expansion kinetics for individual plants of a real crop of bush rose primary shoots. Leaflet or internode length was simulated as a logistic function of thermal time. The model was evaluated by cross-validation. We found that differences in leaflet or internode expansion kinetics between phytomer positions and between plants at a given phytomer position were due mostly to large differences in time of organ expansion and expansion rate, rather than differences in expansion duration. Thus, in the model, the parameters linked to expansion duration were predicted by values common to all plants, whereas variability in final size and organ expansion time was captured by input data. The model accurately simulated leaflet and internode expansion for individual plants (RMSEP = 7.3% and 10.2% of final length, respectively. Thus, this study defines the measurements required to simulate expansion and provides the first model simulating organ expansion in rosebush to capture interplant variability.

  8. A Power Series Expansion and Its Applications

    Science.gov (United States)

    Chen, Hongwei

    2006-01-01

    Using the power series solution of a differential equation and the computation of a parametric integral, two elementary proofs are given for the power series expansion of (arcsin x)[squared], as well as some applications of this expansion.

  9. Simplifying Bridge Expansion Joint Design and Maintenance

    Science.gov (United States)

    2011-10-19

    This report presents a study focused on identifying the most durable expansion joints for the South : Carolina Department of Transportation. This is performed by proposing a degradation model for the : expansion joints and updating it based on bridge...

  10. The validity of certain homogenization expansions

    International Nuclear Information System (INIS)

    Williams, M.

    1980-01-01

    Asymptotic expansions are formally developed for the transport problem in a cellular medium (full-space) and also for non-cellular media in domains with boundaries. The expansions are asymptotic with respect to the mean free path length and cell dimension. It is proved in this paper that the expansion in the full-space case is valid. (author)

  11. Relation between radius and expansion velocity in planetary nebulae

    International Nuclear Information System (INIS)

    Chu, Y.H.; Kwitter, K.B.; Kaler, J.B.

    1984-01-01

    The expansion velocity-radius (R-V) relation for planetary nebulae is examined using the existing measurements of expansion velocities and recent calculations of radii. It is found that some of the previously alleged R-V relations for PN are not convincingly established. The scatter in the R-V plots may be due largely to stratification of ions in individual nebulae and to heterogeneity in the planetary nebula population. In addition, from new echelle/CCD observations of planetary nebulae, it is found that spatial information is essential in deriving the internal kinematic properties. Future investigations of R-V relations should be pursued separately for groups of planetaries with similar physical properties, and they should employ observations of appropriate low excitation lines in order to measure the expansion velocity at the surface of the nebula. 26 references

  12. Thermal expansion of glasses at low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Lyon, K.G.

    1979-01-01

    The linear thermal expansion coefficient (..cap alpha.. = (par. deltalnL/par. deltaT)/sub p/) was measured at temperatures to 1.2K for two amorphous solids, fused silica and PMMA (polymethylmethacrylate, plexiglas), using a parallel plate capacitor differential dilatometer. The low temperature expansion coefficients for these solids have the same temperature dependences as the specific heats, and show a contribution which is linear in the temperature and which can be associated with the postulate of a broad distribution of two level states. The Grueneisen parameters which are associated with this contribution are comparable for the two solids (Y approx. = -16), and suggest a further indication of common behavior for amorphous solids at low temperature. Large magnitudes for Grueneisen parameters (/..gamma../ > 5) generally are associated with tunneling models. A symmetric double harmonic oscillator tunneling model can be used to understand the sign and magnitude of ..gamma.. for these solids. This model is inconsistent with other thermal and thermodynamic data for fused silica. The existence of similar negative and large magnitude Grueneisen parameters for these two amorphous solids places an additional constraint on theories for the low temperature properties of glasses.

  13. Expansion of protein domain repeats.

    Directory of Open Access Journals (Sweden)

    Asa K Björklund

    2006-08-01

    Full Text Available Many proteins, especially in eukaryotes, contain tandem repeats of several domains from the same family. These repeats have a variety of binding properties and are involved in protein-protein interactions as well as binding to other ligands such as DNA and RNA. The rapid expansion of protein domain repeats is assumed to have evolved through internal tandem duplications. However, the exact mechanisms behind these tandem duplications are not well-understood. Here, we have studied the evolution, function, protein structure, gene structure, and phylogenetic distribution of domain repeats. For this purpose we have assigned Pfam-A domain families to 24 proteomes with more sensitive domain assignments in the repeat regions. These assignments confirmed previous findings that eukaryotes, and in particular vertebrates, contain a much higher fraction of proteins with repeats compared with prokaryotes. The internal sequence similarity in each protein revealed that the domain repeats are often expanded through duplications of several domains at a time, while the duplication of one domain is less common. Many of the repeats appear to have been duplicated in the middle of the repeat region. This is in strong contrast to the evolution of other proteins that mainly works through additions of single domains at either terminus. Further, we found that some domain families show distinct duplication patterns, e.g., nebulin domains have mainly been expanded with a unit of seven domains at a time, while duplications of other domain families involve varying numbers of domains. Finally, no common mechanism for the expansion of all repeats could be detected. We found that the duplication patterns show no dependence on the size of the domains. Further, repeat expansion in some families can possibly be explained by shuffling of exons. However, exon shuffling could not have created all repeats.

  14. Australian coal industry continues expansion

    International Nuclear Information System (INIS)

    Edwards, G.E.

    1991-01-01

    Recent saleable Australian black coal production figures are given along with trends in development of new operations and new technology aiming to provide a sound basis for the continuing expansion of the Australian coal industry. Export prices from 1982 to 1991 to Japan (Australia's major export market) are provided, together with Australian dollar return to exporters at the exchange rate prevailing at the start of each contract year. An increased demand for steaming coal is expected, thus maintaining Australia's position as the world's larger exporter. 4 tabs

  15. Contribution of thermal expansion and

    Directory of Open Access Journals (Sweden)

    O.I.Pursky

    2007-01-01

    Full Text Available A theoretical model is developed to describe the experimental results obtained for the isobaric thermal conductivity of rare gas solids (RGS. The isobaric thermal conductivity of RGS has been analysed within Debye approximation with regard to the effect of thermal expansion. The suggested model takes into consideration the fact that thermal conductivity is determined by U-processes while above the phonon mobility edge it is determined by "diffusive" modes migrating randomly from site to site. The mobility edge ω0 is determined from the condition that the phonon mean-free path restricted by the U-processes cannot be smaller than half of the phonon wavelength.

  16. Low-thermal expansion infrared glass ceramics

    Science.gov (United States)

    Lam, Philip

    2009-05-01

    L2 Tech, Inc. is in development of an innovative infrared-transparent glass ceramic material with low-thermal expansion (nano-crystals in a residual glass phase. The major crystalline phase is zirconium tungstate (ZrW2O8) which has Negative Thermal Expansion (NTE). The glass phase is the infrared-transparent germanate glass which has positive thermal expansion (PTE). Then glass ceramic material has a balanced thermal expansion of near zero. The crystal structure is cubic and the thermal expansion of the glass ceramic is isotropic or equal in all directions.

  17. Study of the multifragmentation in central collisions of the system: 129Xe + natSn between 32 and 50 MeV/A: measurement of collective expansion energy and of freeze-out volume

    International Nuclear Information System (INIS)

    Salou, S.

    1997-01-01

    The multifragmentation of the nuclear system formed in the central collisions of the Xe+Sn reaction between 32 and 50 MeV/A has been studied with the INDRA detector. A tensorial analyse is used to select central collisions. An important part of the charge (about 85 %) is isotropically emitted. The charge partitions have the characteristics of a simultaneous multiple fragment emission. The shape of the fragment kinetic energy distributions together with the reduced velocity correlation functions indicate that the fragmentation is a simultaneous process that occurs at low density. A comparison between the experimental data and predictions of the statistical multifragmentation model of Copenhagen (SMM) shows that charge partitions agree with the hypothesis of a thermodynamical equilibrium, whereas, kinetic observables are more constraining to the model and difficult to reproduce. However, fragments correlation functions are used in order to extract the freeze-out volume and the collective radial energy. At 50 MeV/A, the freeze-out volume is estimated to be 2.7 times the normal volume. It decreases with incident energy to be nearly twice the normal volume at 32 MeV/S. The collective energy evolves from 0 to 1.3 MeV/A with the bombarding energy. This expansion is not purely thermal and originates probably from a dynamical compression developed in the early stage of the collision. (author)

  18. Mechanism of pericardial expansion with cardiac enlargement.

    Science.gov (United States)

    Kardon, D E; Borczuk, A C; Factor, S M

    2000-01-01

    The normal pericardial sac accommodates a 250-350 gram heart and 15-50 ml of pericardial fluid. Cardiac enlargement and/or increases in fluid must be accompanied by an increase in pericardial volume and a concomitant expansion of the pericardial sac. The mechanism of such expansion has been debated, but theoretical considerations include fibroblastic proliferation with new connective tissue deposition versus remodeling of the pre-existent connective tissue. Nineteen pericardia were obtained from consecutive adult autopsies. Total pericardial fluid was measured; the absolute value of pericardial fluid volume and cardiac weight were added to create a total score. Representative pericardial tissue was stained with hematoxylin-eosin (H&E), Masson's trichrome, and Verhoeff's elastin stain (EVG). An additional archival case with the pericardium from a 900-g heart with 1,000-ml of fluid was also included. None of the sections showed histologic evidence of fibroblastic proliferation. Parameters indicative of collagen stretching or damage were evaluated. The greatest correlative factor in identifying an enlarged pericardium was the average of four measurements of the greatest distance between elastic fibers surrounding obliquely oriented collagen layers. Five of six cases with a cardiac score > 450 showed an average measurement of less than 15 microns, and 10 of 14 cases with a cardiac score 15 microns = 0.0498). Histologic and ultrastructural evidence of collagen damage was identified in the pericardium from the 900-g heart with the 1,000-ml effusion. We propose that collagen stretching and slippage of obliquely oriented collagen layers contribute to the increased surface area needed to accommodate larger volumes. When these limits are exceeded, collagen damage ensues.

  19. Relationship between thermal expansion coefficient and glass transition temperature in metallic glasses

    International Nuclear Information System (INIS)

    Kato, H.; Chen, H.-S.; Inoue, A.

    2008-01-01

    The thermal expansion coefficients of 13 metallic glasses were measured using a thermo-mechanical analyser. A unique correlation was found between the linear thermal expansion coefficient and the glass transition temperature-their product is nearly constant ∼8.24 x 10 -3 . If one assumes the Debye expression for thermal activation, the total linear thermal expansion up to glass transition temperature (T g ) is reduced to 6 x 10 -3 , nearly 25% of that at the fusion of pure metals

  20. Imagination as expansion of experience.

    Science.gov (United States)

    Zittoun, Tania; Cerchia, Frédéric

    2013-09-01

    This paper proposes a developmental view on imagination: from this perspective, imagination can be seen as triggered by some disrupting event, which generates a disjunction from the person's unfolding experience of the "real" world, and as unfolding as a loop, which eventually comes back to the actual experience. Examining recent and classical theorization of imagination in psychology, the paper opposes a deficitary view of imagination to an expansive notion of imagination. The paper explores Piaget, Vygotsky, Harris and Pelaprat & Cole consider: 1) What does provoke a "rupture" or disjunction? 2) What are the psychological processes involved in the imaginary loop? 3) What nourishes such processes? 4) What are the consequences of such imaginary loop, or what does it enable doing? The paper proposes to adopt an expansive view of imagination, as Vygotsky proposed-a perspective that has been under-explored empirically since his seminal work. To stimulate such sociocultural psychology of imagination, two empirical examples are provided, one showing how children make sense of metaphor in an experimental setting, the other showing a young person using a novel met at school as symbolic resource.

  1. Nonperturbative path integral expansion II

    International Nuclear Information System (INIS)

    Kaiser, H.J.

    1976-05-01

    The Feynman path integral representation of the 2-point function for a self-interacting Bose field is investigated using an expansion ('Path Integral Expansion', PIE) of the exponential of the kinetic term of the Lagrangian. This leads to a series - illustrated by a graph scheme - involving successively a coupling of more and more points of the lattice space commonly employed in the evaluation of path integrals. The values of the individual PIE graphs depend of course on the lattice constant. Two methods - Pade approximation and Borel-type extrapolation - are proposed to extract information about the continuum limit from a finite-order PIE. A more flexible PIE is possible by expanding besides the kinetic term a suitably chosen part of the interaction term too. In particular, if the co-expanded part is a mass term the calculation becomes only slightly more complicated than in the original formulation and the appearance of the graph scheme is unchanged. A significant reduction of the number of graphs and an improvement of the convergence of the PIE can be achieved by performing certain sums over an infinity of graph elements. (author)

  2. Evolutionary expansion of the Monogenea.

    Science.gov (United States)

    Kearn, G C

    1994-12-01

    The evolutionary expansion of the monogeneans has taken place in parallel with the diversification of the fish-like vertebrates. In this article the main trends in monogenean evolution are traced from a hypothetical skin-parasitic ancestor on early vertebrates. Special consideration is given to the following topics: early divergence between skin feeders and blood feeders; diversification and specialization of the haptor for attachment to skin; transfer from host to host, viviparity and the success of the gyrodactylids; predation on skin parasites and camouflage; colonization of the buccal and branchial cavities; diversification and specialization of the haptor for attachment to the gills; phoresy in gill parasites; the development of endoparasitism and the origin of the cestodes; the success of dactylogyroidean gill parasites; the uniqueness of the polyopisthocotyleans; ovoviviparity and the colonization of the tetrapods. Host specificity has been the guiding force of coevolution between monogeneans and their vertebrate hosts, but the establishment of monogeneans on unrelated hosts sharing the same environment (host-switching) may have been underestimated. Host-switching has provided significant opportunities for evolutionary change of direction and is probably responsible for the establishment of monogeneans on cephalopod molluscs, on the hippopotamus and possibly on chelonians. There are indications that host-switching may be more common in monogeneans that spread by direct transfer of adults/juveniles from host to host. A limitation on the further expansion of monogeneans is the need for water for the dispersal of the infective larva (oncomiracidium).

  3. Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

    OpenAIRE

    Fei-Ran Shen; Hao Kuang; Feng-Xia Hu; Hui Wu; Qing-Zhen Huang; Fei-Xiang Liang; Kai-Ming Qiao; Jia Li; Jing Wang; Yao Liu; Lei Zhang; Min He; Ying Zhang; Wen-Liang Zuo; Ji-Rong Sun

    2017-01-01

    Materials with zero thermal expansion (ZTE) or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE) materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn–Co–Ge–In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE o...

  4. Medicaid expansion and mental health: A Minnesota case study.

    Science.gov (United States)

    Diaz Vickery, Katherine; Guzman-Corrales, Laura; Owen, Ross; Soderlund, Dana; Shimotsu, Scott; Clifford, Pam; Linzer, Mark

    2016-03-01

    The health status and psychosocial needs of the Medicaid expansion population have been estimated but not measured. This population includes childless adults predicted to have high rates of mental illness, especially among the homeless. Given limitations in access to mental health services, it is unclear how prepared the U.S. health care system is to care for the needs of the expansion population. Using enrollment and claims data from the Minnesota Department of Human Services, this study presents prevalence rates of mental illness diagnoses and measures of unstable housing in Minnesota's childless-adult early Medicaid expansion population. Rates are compared with prior predictions of serious psychological distress and mental illness constructed from the National Survey on Drug Use and Health (NSDUH) using χ2 and t tests. Diagnoses of mental illness in Minnesota's childless-adult early Medicaid expansion population were more than 15% higher than prevalence measures of mental illness/distress for the current Medicaid population. Diagnosis rates fell within confidence intervals of estimates of mental illness for Minnesota's Medicaid expansion population. Almost 1 in 3 enrollees had a marker of unstable housing; of this group, half had mental illness and/or distress. Findings support predictions of the high burden of mental illness and unstable housing among the Medicaid expansion population. Minnesota offers lessons to other regions working to care for such populations: (a) the use of flexible financing structures to build integrated care systems and (b) passage of legislation to allow data sharing among mental health, social services, and medical care. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  5. Langmuir probe study of plasma expansion in pulsed laser ablation

    DEFF Research Database (Denmark)

    Hansen, T.N.; Schou, Jørgen; Lunney, J.G.

    1999-01-01

    Langmuir probes were used to monitor the asymptotic expansion of the plasma produced by the laser ablation of a silver target in a vacuum. The measured angular and temporal distributions of the ion flux and electron temperature were found to be in good agreement with the self-similar isentropic...

  6. Decelerating open-channel flow in a gradual expansion

    NARCIS (Netherlands)

    Hoan, N.T.; Booij, R.; Stive, M.J.F.; Verhagen, H.J.

    2007-01-01

    The velocity and turbulence distributions of decelerating open-channel flow in a gradual expansion were measured using LDV equipment. The results show that the logarithmic law can describe the mean velocity in the bottom region well while the Coles’ law can be applied to the outer region. The shear

  7. Thermal expansion of the superconducting ferromagnet UCoGe

    NARCIS (Netherlands)

    Gasparini, A.; Huang, Y.K.; Hartbaum, J.; v. Löhneysen, H.; de Visser, A.

    2010-01-01

    We report measurements of the coefficient of linear thermal expansion, α(T), of the superconducting ferromagnet UCoGe. The data taken on a single-crystalline sample along the orthorhombic crystal axes reveal a pronounced anisotropy with the largest length changes along the b axis. The large values

  8. Thermal expansion of crystals of the N2 type

    International Nuclear Information System (INIS)

    Tolkachev, A.M.; Manzhelii, V.G.; Azarenkov, V.P.; Jezowski, A.; Kosobutskaya, E.A.

    1981-01-01

    Linear expansion coefficients of low temperature crystals with linear molecules and Pa3 lattice N 2 (2-21 K), CO(2-28 K), CO 2 (2-25 K), N 2 O(2-90 K) were measured. A version of the law of corresponding states to describe the translational component of the thermal expansion of the substances studied and other low temperature crystals with close-packed lattices is proposed. In the thermal properties of crystals consisting of molecules without inversion centre, we have found anomalies interpreted as the evidence of a partial dipole ordering. (orig.)

  9. Intraspecific genetic variation and competition interact to influence niche expansion.

    Science.gov (United States)

    Agashe, Deepa; Bolnick, Daniel I

    2010-10-07

    Theory and empirical evidence show that intraspecific competition can drive selection favouring the use of novel resources (i.e. niche expansion). The evolutionary response to such selection depends on genetic variation for resource use. However, while genetic variation might facilitate niche expansion, genetically diverse groups may also experience weaker competition, reducing density-dependent selection on resource use. Therefore, genetic variation for fitness on different resources could directly facilitate, or indirectly retard, niche expansion. To test these alternatives, we factorially manipulated both the degree of genetic variation and population density in flour beetles (Tribolium castaneum) exposed to both novel and familiar food resources. Using stable carbon isotope analysis, we measured temporal change and individual variation in beetle diet across eight generations. Intraspecific competition and genetic variation acted on different components of niche evolution: competition facilitated niche expansion, while genetic variation increased individual variation in niche use. In addition, genetic variation and competition together facilitated niche expansion, but all these impacts were temporally variable. Thus, we show that the interaction between genetic variation and competition can also determine niche evolution at different time scales.

  10. Setting time and thermal expansion of two endodontic cements.

    Science.gov (United States)

    Santos, Alailson D; Araújo, Eudes B; Yukimitu, Keizo; Barbosa, José C; Moraes, João C S

    2008-09-01

    The purpose of this study was to evaluate the setting time and the thermal expansion coefficient of 2 endodontic cements, MTA-Angelus and a novel cement called CER. The setting time was determined in accordance to ANSI/ADA specifications no. 57. Three samples of 10 mm diameter and 2 mm thickness were prepared for each cement. The thermal expansion measurements were performed by strain gauge technique. Four samples of each cement were prepared using silicone rings of 5 mm diameter and 2 mm thickness. The data were analyzed statistically using the Student t test. The setting time obtained for the MTA-Angelus and CER cements was 15 (SD 1) min and 7 (SD 1) min, respectively. The linear coefficient of thermal expansion was 8.86 (SD 0.28) microstrain/ degrees C for MTA-Angelus and 11.76 (SD 1.20) microstrain/ degrees C for CER. The statistical analysis showed significant difference (P linear coefficient of thermal expansion between the 2 cements. The CER cement has a coefficient of expansion similar to dentin, which could contribute to a decrease of microleakage degree.

  11. Magnetic susceptibilities and thermal expansion of artificial graphites

    International Nuclear Information System (INIS)

    Cornuault, P.; Herpin, A.; Hering, H.; Seguin, M.; Commissariat a l'Energie Atomique, Saclay

    1960-01-01

    Starting from measurements of the magnetic susceptibility made in the two principal directions of a graphite bar, the distribution function of the normals to the carbon planes in the crystallites has been evaluated. The effect of different variation in the manufacturing process on this crystalline anisotropy has been studied. From this crystalline anisotropy we have calculated the thermal expansion coefficient possessed by a compact mass of crystallites having exactly the same orientational anisotropy as the porous body consideration. The difference between this and the observed expansion coefficient leads to the determination of the expansion of the non-graphitic part of the mass which turns out to have a negative value and is also anisotropic. We have attempted to draw some conclusions from this result. (author) [fr

  12. Thermal expansion of martensitic A15 superconductors: V3Si

    International Nuclear Information System (INIS)

    Finlayson, T.R.; Liu, M.; Smith, T.F.

    1995-01-01

    The martensite phase morphology of V 3 Si has been controlled by the application of appropriate stress fields to a single crystal. With this procedure, it is possible to transform the crystal to a single, tetragonal domain, enabling the thermal expansion coefficients for the tetragonal a and c axes to be measured, using high-resolution, capacitance dilatometry. Expansion anomalies were found at low temperatures, well below the superconducting critical temperature, for both the a and c axes. The tetragonality continues increasing on cooling at low temperatures, which, predicted by theory, should have been inhibited by the onset of superconductivity. In addition, anisotropy in thermal expansion is found up to 50 K, which is well above the conventional M s temperature of 21 K. (orig.)

  13. Effect of pressure on thermal expansion of UNiGa

    International Nuclear Information System (INIS)

    Honda, F.; Andreev, A.V.; Havela, L.; Prokes, K.; Sechovsky, V.

    1997-01-01

    The thermal expansion of single crystalline UNiGa has been measured along the crystallographic axes (a and c) under pressures up to 1.1 GPa. The linear thermal expansion both in the paramagnetic and antiferromagnetic ranges is strongly anisotropic. The antiferromagnetic ordering is accompanied by considerable (10 -4 ) linear spontaneous magnetostrictions (along the a- and c-axis) of different signs (-0.8 x 10 -4 and 1.8 x 10 -4 ). The mutual compensation of these two effects causes the volume effect to be rather small (∝10 -5 ). Two of the four magnetic phase transitions in UNiGa indicated by the expansion anomalies under ambient pressure are suppressed by pressures above 0.5 GPa. Results of our experiments allow to construct a pressure-temperature (p-T) magnetic phase diagram. (orig.)

  14. Thermal expansion of epoxy-fiberglass composite specimens

    International Nuclear Information System (INIS)

    McElroy, D.L.; Weaver, F.J.; Bridgman, C.

    1986-01-01

    The thermal expansion behavior of three epoxy-fiberglass composite specimens was measured from 20 to 120 0 C (70 to 250 0 F) using a fused quartz push-rod dilatometer. Billets produced by vacuum impregnating layers of two types of fiberglass cloth with an epoxy resin were core-drilled to produce cylindrical specimens. These were used to study expansion perpendicular and parallel to the fiberglass layers. The dilatometer is held at a preselected temperature until steady-state is indicated by stable length and temperature data. Before testing the composite specimens, a reliability check of the dilatometer was performed using a copper secondary standard. This indicated thermal expansion coefficient (α) values within +-2% of expected values from 20 to 200 0 C

  15. Evaluation on expansive performance of the expansive soil using electrical responses

    Science.gov (United States)

    Chu, Ya; Liu, Songyu; Bate, Bate; Xu, Lei

    2018-01-01

    Light structures, such as highways and railroads, built on expansive soils are prone to damages from the swelling of their underlain soil layers. Considerable amount of research has been conducted to characterize the swelling properties of expansive soils. Current swell characterization models, however, are limited by lack of standardized tests. Electrical methods are non-destructive, and are faster and less expensive than the traditional geotechnical methods. Therefore, geo-electrical methods are attractive for defining soil characteristics, including the swelling behavior. In this study, comprehensive laboratory experiments were undertaken to measure the free swelling and electrical resistivity of the mixtures of commercial kaolinite and bentonite. The electrical conductivity of kaolinite-bentonite mixtures was measured by a self-developed four-electrode soil resistivity box. Increasing the free swelling rate of the kaolinite-bentonite mixtures (0.72 to 1 of porosity of soils samples) led to a reduction in the electrical resistivity and an increase in conductivity. A unique relationship between free swelling rate and normalized surface conductivity was constructed for expensive soils by eliminating influences of porosity and m exponent. Therefore, electrical response measurement can be used to characterize the free swelling rate of expensive soils.

  16. On the Equisummability of Hermite and Fourier Expansions

    Indian Academy of Sciences (India)

    We prove an equisummability result for the Fourier expansions and Hermite expansions as well as special Hermite expansions. We also prove the uniform boundedness of the Bochner-Riesz means associated to the Hermite expansions for polyradial functions.

  17. Relationship Development in Greenfield Expansions

    DEFF Research Database (Denmark)

    Drogendijk, Rian; Andersson, Ulf

    2013-01-01

    This paper investigates conceptually how new Greenfield subsidiaries develop relationships over time. We focus our analysis on the earliest start-up stage of new Greenfield subsidiaries, and on the dynamics of relationships development with five different groups of actors within the MNC...... and the local environment of the new Greenfield. We argue that relationship strength, or the intensity of interaction and resource exchange, depends on the new Greenfield''s degree of dependence or interdependence within these relationships and develop propositions based on institutional theory, resource...... dependency theory and network approaches. In the concluding sections we suggest directions for future work to enhance understanding of the dynamics of relationship management in new Greenfield expansions....

  18. Image Compression by Gabor Expansion

    Directory of Open Access Journals (Sweden)

    J. Chmurny

    2001-06-01

    Full Text Available Transform-based coding methods are popular in data compression. Inthe paper, an easily implemented method is proposed for the weightingfactors of the Gabor decomposition. The method is based on theleast-mean- squares error (LMSE approach. The solution of the LMSEproblem shows that the weighting factors can be extracted by simplemultiplication between a matrix and the vector of data. If the setGabor functions are chosen to be independent of the test images, thismatrix is constant. Images are reconstructed by multiplying the matrixof Gabor functions and the vector of weighting factors. The choise ofGabor functions in the decomposition allows that the resultingdecomposition has a pyramidal structure. In the paper is proposedsimple codec system for pyramidal Gabor expansion for imagecompression.

  19. Shrub expansion in SW Greenland

    DEFF Research Database (Denmark)

    Jørgensen, Rasmus Halfdan

    Arctic regions have experienced higher temperatures in recent decades, and the warming trend is projected to continue in the coming years. Arctic ecosystems are considered to be particularly vulnerable to climate change. Expansion of shrubs has been observed widely in tundra areas across the Arctic...... to increasing shrub cover. Despite this, there is only limited experimental evidence that growth of the species responds to warming. Plant populations in fragmented and isolated locations could face problems adapting to a warming climate due to limited genetic variation and restricted migration from southern...... from more southerly habitats are better adapted to climatic conditions in a warmer Greenland compared with local provenances. To answer the first question historical photographs of vegetation in SW Greenland (1898–1974) were compiled. The photos were repeated in 2010 and 2011 and 64 photo pairs were...

  20. High enthalpy, hypervelocity flows of air and argon in an expansion tube

    Science.gov (United States)

    Neely, A. J; Stalker, R. J.; Paull, A.

    1991-01-01

    An expansion tube with a free piston driver has been used to generate quasi-steady hypersonic flows in argon and air at flow velocities in excess of 9 km/s. Irregular test flow unsteadiness has limited the performance of previous expansion tubes, and it has been found that this can be avoided by attention to the interaction between the test gas accelerating expansion and the contact surface in the primary shock tube. Test section measurements of pitot pressure, static pressure and flat plate heat transfer are reported. An approximate analytical theory has been developed for predicting the velocities achieved in the unsteady expansion of the ionizing or dissociating test gas.

  1. Thermal expansion studies on europium titanate (Eu2TiO5)

    International Nuclear Information System (INIS)

    Panneerselvam, G.; Subramanian, G.G.S.; Antony, M.P.

    2008-01-01

    The lattice thermal expansion characteristics of europium titanate (Eu 2 TiO 5 ) have been studied by measuring the lattice parameter by high temperature X-ray diffraction technique (HT-XRD) in the temperature range 298-1573K. Percentage linear thermal expansion and mean linear thermal expansion coefficients were computed from the lattice parameter data. The percentage linear thermal expansion in the temperature range 298-1573 K along a, b and c axes are 1.05, 1.15 and 0.95 respectively. (author)

  2. Hygroscopic expansion kinetics of dental resin-composites.

    Science.gov (United States)

    Alrahlah, A; Silikas, N; Watts, D C

    2014-02-01

    To evaluate the extent and rate of hygroscopic expansion of resin composites at 37°C. Eight resin composites were examined: 1 micro-hybrid (Bright Light(®)), 5 nano-hybrids (Experimental Vertise™; Nanoceram-Bright(®); Tetric EvoCeram(®); Grandio(®) SO; Ceram X™ duo) and 2 flowables (X-tra base; Venus(®) Diamond Flow). Five disks (15 mm×2 mm) of each material were prepared. The mean change in specimen diameter was recorded by a custom-built non-contact laser micrometer. Specimens were initially measured dry and then at fixed time intervals, over 150 days, after storage in distilled water at 37±1°C. Data were re-expressed in volumetric terms and analysed by repeated measures ANOVA, one-way ANOVA and Tukey's post hoc test (α=0.05). The volumetric hygroscopic expansion ranged from 0.58 to 2.26 and can be considered in three bands. First, Experimental Vertise had the highest expansion (pGrandio So, Nanoceram-Bright and X-tra base, with no significant difference between them. For the size (2mm thickness) and shape of specimen measured, equilibrium was attained in all cases by 60 days. Within this set of resin-composites the equilibrium expansion varied by almost 400% of the lowest material. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

  3. Rapid maxillary expansion assisted by palatal mini-implants in adolescents - preliminary study.

    Science.gov (United States)

    Chane-Fane, Caroline; Darqué, François

    2015-03-01

    Our preliminary clinical study compares the transverse skeletal and dento-alveolar modifications occurring after rapid maxillary expansion with purely dental anchorage or with dental anchorage assisted by palatal mini-implants, in endognathic adolescents aged 12 to 17. Nine patients were treated by means of tooth- and implant-supported expansion, and 7 others by means of a purely tooth-borne expander. The changes, 4 months after expansion, were measured on impressions and front-view X-rays in the 2 groups, and on three-dimensional X-rays for 6 patients treated by tooth- and implant-supported expansion. In our sample, tooth- and implant-supported expansion preserved the alveolar bone of 14/24 and gave rise to less buccal tipping of 16/26 than purely tooth-borne expansion. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  4. Colossal negative thermal expansion in BiNiO3 induced by intermetallic charge transfer.

    Science.gov (United States)

    Azuma, Masaki; Chen, Wei-tin; Seki, Hayato; Czapski, Michal; Olga, Smirnova; Oka, Kengo; Mizumaki, Masaichiro; Watanuki, Tetsu; Ishimatsu, Naoki; Kawamura, Naomi; Ishiwata, Shintaro; Tucker, Matthew G; Shimakawa, Yuichi; Attfield, J Paul

    2011-06-14

    The unusual property of negative thermal expansion is of fundamental interest and may be used to fabricate composites with zero or other controlled thermal expansion values. Here we report that colossal negative thermal expansion (defined as linear expansion linear expansion coefficient for Bi(0.95)La(0.05)NiO(3) is -137×10(-6) K(-1) and a value of -82×10(-6) K(-1) is observed between 320 and 380 K from a dilatometric measurement on a ceramic pellet. Colossal negative thermal expansion materials operating at ambient conditions may also be accessible through metal-insulator transitions driven by other phenomena such as ferroelectric orders.

  5. Pressurized electrolysis stack with thermal expansion capability

    Science.gov (United States)

    Bourgeois, Richard Scott

    2015-07-14

    The present techniques provide systems and methods for mounting an electrolyzer stack in an outer shell so as to allow for differential thermal expansion of the electrolyzer stack and shell. Generally, an electrolyzer stack may be formed from a material with a high coefficient of thermal expansion, while the shell may be formed from a material having a lower coefficient of thermal expansion. The differences between the coefficients of thermal expansion may lead to damage to the electrolyzer stack as the shell may restrain the thermal expansion of the electrolyzer stack. To allow for the differences in thermal expansion, the electrolyzer stack may be mounted within the shell leaving a space between the electrolyzer stack and shell. The space between the electrolyzer stack and the shell may be filled with a non-conductive fluid to further equalize pressure inside and outside of the electrolyzer stack.

  6. A critical examination of expansion tunnel performance

    Science.gov (United States)

    Miller, C. G.

    1978-01-01

    An experimental study of the performance of the expansion tunnel for various test gases and range of quiescent acceleration section and nozzle pressure, nozzle geometric area ratio, and nozzle axial station has been performed. Flow diagnostics used to examine expansion tunnel flow characteristics were time histories and profiles of pitot pressure and axial component of flow velocity. The purpose of this study was to determine experimentally what limitations might restrict predicted operational flexibility and the advantages and disadvantages of this mode of operation as compared to the expansion tube. Results are presented which demonstrate the expansion tunnel offers several advantages over the expansion tube, but the severity of the disadvantages of the tunnel makes the expansion tube mode of operation the more desirable for performing hypersonic-hypervelocity aerothermodynamic studies of proposed entry configurations.

  7. Simulation program for multiple expansion Stirling machines

    International Nuclear Information System (INIS)

    Walker, G.; Weiss, M.; Fauvel, R.; Reader, G.; Bingham, E.R.

    1992-01-01

    Multiple expansion Stirling machines have been a topic of interest at the University of Calgary for some years. Recently a second-order computer simulation program with integral graphics package for Stirling cryocoolers with up to four stages of expansion were developed and made available to the Stirling community. Adaptation of the program to multiple expansion Stirling power systems is anticipated. This paper briefly introduces the program and presents a specimen result

  8. Characterisation of An Expansion-Type Cloud Condensation Nucleus Counter

    Energy Technology Data Exchange (ETDEWEB)

    Van Ekeren, J.S.; Fierz, M. [FH-Aargau (Switzerland); Weingartner, E.; Scherrer, L. [ETH Zuerich (Switzerland); Burtscher, H. [FH-Aargau (Switzerland); Baltensperger, U.

    2004-03-01

    A new instrument has been built in order to measure the concentration of aerosol particles that can act as cloud condensation nuclei (CCN). The fast expansion results in a homogeneous distribution of the super-saturation in the chamber. Therefore particles can activate simultaneously. We are able to measure CCN concentrations at low supersaturation. CCN concentrations can be computed by comparison of light scat-ter and extinction signals with the Mie theory. (author)

  9. The Political Economy of the Subprime Mortgage Credit Expansion

    OpenAIRE

    Atif Mian; Amir Sufi; Francesco Trebbi

    2010-01-01

    We examine how special interests, measured by campaign contributions from the mortgage industry, and constituent interests, measured by the share of subprime borrowers in a congressional district, may have influenced U.S. government policy toward the housing sector during the subprime mortgage credit expansion from 2002 to 2007. Beginning in 2002, mortgage industry campaign contributions increasingly targeted U.S. representatives from districts with a large fraction of subprime borrowers. Dur...

  10. Thermal Conductivity And Expansion Of Graphite/Copper

    Science.gov (United States)

    Mcdanels, David L.; Ellis, David L.

    1993-01-01

    Report describes fabrication of graphite-fiber/copper-matrix composite plates, measurements of thermal conductivities of plates at temperatures from ambient to 1,073 K, and measurements of thermal expansions of plates from ambient temperature to 1,050 K. Composites promising lightweight, high-thermal-conductivity materials proposed for use in heat exchangers and other heat-transfer components of power systems in spacecraft and hypersonic aircraft. Graphite/copper also of interest as model composite material.

  11. Adiabatic supernova expansion into the circumstellar medium

    International Nuclear Information System (INIS)

    Band, D.L.; Liang, E.P.

    1987-01-01

    We perform one dimensional numerical simulations with a Lagrangian hydrodynamics code of the adiabatic expansion of a supernova into the surrounding medium. The early expansion follows Chevalier's analytic self-similar solution until the reverse shock reaches the ejecta core. We follow the expansion as it evolves towards the adiabatic blast wave phase. Some memory of the earlier phases of expansion is retained in the interior even when the outer regions expand as a blast wave. We find the results are sensitive to the initial configuration of the ejecta and to the placement of gridpoints. 6 refs., 2 figs

  12. Thermal expansion of L-ascorbic acid

    Science.gov (United States)

    Nicolaï, B.; Barrio, M.; Tamarit, J.-Ll.; Céolin, R.; Rietveld, I. B.

    2017-04-01

    The specific volume of vitamin C has been investigated by X-ray powder diffraction as a function of temperature from 110 K up to complete degradation around 440 K. Its thermal expansion is relatively small in comparison with other organic compounds with an expansivity α v of 1.2(3) × 10-4 K-1. The structure consists of strongly bound molecules in the ac plane through a dense network of hydrogen bonds. The thermal expansion is anisotropic. Along the b axis, the expansion has most leeway and is about 10 times larger than in the other directions.

  13. Structure and thermal expansion of liquid bismuth

    Directory of Open Access Journals (Sweden)

    Mudry S.

    2015-12-01

    Full Text Available Experimental structural data for liquid Bi were used for estimation of the main structure parameters as well as the thermal expansion coefficient both in supercooled and superheated temperature ranges. It was shown that the equilibrium melt had a positive thermal expansion coefficient within a temperature range upon melting and a negative one at higher temperatures. The former was related to structure changes upon melting, whereas the latter with topologic disordering upon further heating. It was found that the superheated melt had a negative thermal expansion coefficient. The results obtained from structural data were compared with the thermal expansion coefficient calculated from the data of density for liquid Bi.

  14. Expansion of an ultracold Rydberg plasma

    Science.gov (United States)

    Forest, Gabriel T.; Li, Yin; Ward, Edwin D.; Goodsell, Anne L.; Tate, Duncan A.

    2018-04-01

    We report a systematic experimental and numerical study of the expansion of ultracold Rydberg plasmas. Specifically, we have measured the asymptotic expansion velocities, v0, of ultracold neutral plasmas (UNPs) which evolve from cold, dense samples of Rydberg rubidium atoms using ion time-of-flight spectroscopy. From this, we have obtained values for the effective initial plasma electron temperature, Te ,0=mionv02/kB (where mion is the Rb+ ion mass), as a function of the original Rydberg atom density and binding energy, Eb ,i. We have also simulated numerically the interaction of UNPs with a large reservoir of Rydberg atoms to obtain data to compare with our experimental results. We find that for Rydberg atom densities in the range 107-109 cm-3, for states with principal quantum number n >40 , Te ,0 is insensitive to the initial ionization mechanism which seeds the plasma. In addition, the quantity kBTe ,0 is strongly correlated with the fraction of atoms which ionize, and is in the range 0.6 ×| Eb ,i|≲ kBTe ,0≲2.5 ×|Eb ,i| . On the other hand, plasmas from Rydberg samples with n ≲40 evolve with no significant additional ionization of the remaining atoms once a threshold number of ions has been established. The dominant interaction between the plasma electrons and the Rydberg atoms is one in which the atoms are deexcited, a heating process for electrons that competes with adiabatic cooling to establish an equilibrium where Te ,0 is determined by their Coulomb coupling parameter, Γe˜0.01 .

  15. Dynamic thermal expansivity of liquids near the glass transition

    DEFF Research Database (Denmark)

    Niss, Kristine; Gundermann, Ditte; Christensen, Tage Emil

    2012-01-01

    Based on previous works on polymers by Bauer et al. [ Phys. Rev. E 61 1755 (2000)], this paper describes a capacitative method for measuring the dynamical expansion coefficient of a viscous liquid. Data are presented for the glass-forming liquid tetramethyl tetraphenyl trisiloxane (DC704) in the ...... the liquid contracts when cooling from room temperature down to around the glass-transition temperature, which is relevant when measuring on a molecular liquid rather than a polymer.......Based on previous works on polymers by Bauer et al. [ Phys. Rev. E 61 1755 (2000)], this paper describes a capacitative method for measuring the dynamical expansion coefficient of a viscous liquid. Data are presented for the glass-forming liquid tetramethyl tetraphenyl trisiloxane (DC704...

  16. Lifetimes and heavy quark expansion

    Science.gov (United States)

    Lenz, Alexander

    2015-04-01

    Kolya Uraltsev was one of the inventors of the Heavy Quark Expansion (HQE), that describes inclusive weak decays of hadrons containing heavy quarks and in particular lifetimes. Besides giving a pedagogic introduction to the subject, we review the development and the current status of the HQE, which just recently passed several non-trivial experimental tests with an unprecedented precision. In view of many new experimental results for lifetimes of heavy hadrons, we also update several theory predictions: τ (B+)/τ (Bd) = 1.04+0.05-0.01 ± 0.02 ± 0.01, τ(Bs)/τ(Bd) = 1.001 ±0.002, τ(Λb)/τ(Bd) = 0.935 ±0.054 and \\bar {τ } (Ξ b0)/\\bar {τ } (Ξ b+) = 0.95 ± 0.06. The theoretical precision is currently strongly limited by the unknown size of the non-perturbative matrix elements of four-quark operators, which could be determined with lattice simulations.

  17. Local expansions and accretive mappings

    Directory of Open Access Journals (Sweden)

    W. A. Kirk

    1983-01-01

    Full Text Available Let X and Y be complete metric spaces with Y metrically convex, let D⊂X be open, fix u0∈X, and let d(u=d(u0,u for all u∈D. Let f:X→2Y be a closed mapping which maps open subsets of D onto open sets in Y, and suppose f is locally expansive on D in the sense that there exists a continuous nonincreasing function c:R+→R+ with ∫+∞c(sds=+∞ such that each point x∈D has a neighborhood N for which dist(f(u,f(v≥c(max{d(u,d(v}d(u,v for all u,v∈N. Then, given y∈Y, it is shown that y∈f(D iff there exists x0∈D such that for x∈X\\D, dist(y,f(x0≤dist(u,f(x. This result is then applied to the study of existence of zeros of (set-valued locally strongly accretive and ϕ-accretive mappings in Banach spaces

  18. Hubble expansion in static spacetime

    International Nuclear Information System (INIS)

    Rossler, Otto E.; Froehlich, Dieter; Movassagh, Ramis; Moore, Anthony

    2007-01-01

    A recently proposed mechanism for light-path expansion in a static spacetime is based on the moving-lenses paradigm. Since the latter is valid independently of whether space expands or not, a static universe can be used to better see the implications. The moving-lenses paradigm is related to the paradigm of dynamical friction. If this is correct, a Hubble-like law is implicit. It is described quantitatively. A bent in the Hubble-like line is predictably implied. The main underlying assumption is Price's Principle (PI 3 ). If the theory is sound, the greatest remaining problem in cosmology becomes the origin of hydrogen. Since Blandford's jet production mechanism for quasars is too weak, a generalized Hawking radiation hidden in the walls of cosmic voids is invoked. A second prediction is empirical: slow pattern changes in the cosmic microwave background. A third is ultra-high redshifts for Giacconi quasars. Bruno's eternal universe in the spirit of Augustine becomes a bit less outlandish

  19. Primordial vorticity and gradient expansion

    CERN Document Server

    Giovannini, Massimo

    2012-01-01

    The evolution equations of the vorticities of the electrons, ions and photons in a pre-decoupling plasma are derived, in a fully inhomogeneous geometry, by combining the general relativistic gradient expansion and the drift approximation within the Adler-Misner-Deser decomposition. The vorticity transfer between the different species is discussed in this novel framework and a set of general conservation laws, connecting the vorticities of the three-component plasma with the magnetic field intensity, is derived. After demonstrating that a source of large-scale vorticity resides in the spatial gradients of the geometry and of the electromagnetic sources, the total vorticity is estimated to lowest order in the spatial gradients and by enforcing the validity of the momentum constraint. By acknowledging the current bounds on the tensor to scalar ratio in the (minimal) tensor extension of the $\\Lambda$CDM paradigm the maximal comoving magnetic field induced by the total vorticity turns out to be, at most, of the or...

  20. Negative thermal expansion materials: technological key for control of thermal expansion

    OpenAIRE

    Koshi Takenaka

    2012-01-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining pra...

  1. ALLOMETRIC EQUATIONS AND EXPANSION FACTORS FOR TROPICAL DRY TREES OF EASTERN SINALOA, MEXICO

    Directory of Open Access Journals (Sweden)

    Jose de Jesus Navar Chaidez

    2008-12-01

    Full Text Available This research report aimed at estimating: (i bole volume equations, (ii aboveground biomass component equations, and (iii biomass expansion factors, BEF, for aboveground biomass components for tropical dry trees of eastern Sinaloa, Mexico. Field work included measuring dasometric features, dissecting and fresh-weighting trees into biomass components, and collecting samples for ovendry weight measurements. Bole volume and biomass component equations fitted an inventory data set to estimate biomass expansion factors at the plot scale. Results show bole volume and biomass component equations. Mean biomass expansion factors (± standard deviation reported are 0.7854 (0.111, 0.873 (0.055 and 1.460 (0.022 for branches, bole and total aboveground biomass, respectively. Biomass expansion factors are dependent on mean stand dbh and they do not distribute normally. Therefore the Weibull distribution was fitted to biomass expansion figures.

  2. Investigation on the expansion value of turbine generator foundation affected by Alkali-Silica reaction

    International Nuclear Information System (INIS)

    Takakura, T.; Ishikawa, T.; Mitsuki, S.; Matsumoto, N.; Takiguchi, K.; Masuda, Y.; Nishiguchi, I.

    2005-01-01

    It is well known that expansion of concrete is occurred in the concrete structure affected by Alkali-silica reaction in addition to crack propagation. However it is difficult to measure expansion value after the alkali silica reaction occurrence in a structure. The turbine generator foundation which is the core discussion item of this paper has been monitored for expansion values and reinforcement bar strains, upon which the expansion of the structure due to affect of the alkali silica reaction is found out. The total expansion values of the turbine generator foundation due to the affect of Alkali-silica reaction were estimated according to those measurement results in order to be utilized for a turbine generator foundation analysis. (authors)

  3. The heavy quark expansion of QCD

    Energy Technology Data Exchange (ETDEWEB)

    Falk, A.F. [Johns Hopkins Univ., Baltimore, MD (United States). Dept. of Physics and Astronomy

    1997-06-01

    These lectures contain an elementary introduction to heavy quark symmetry and the heavy quark expansion. Applications such as the expansion of heavy meson decay constants and the treatment of inclusive and exclusive semileptonic B decays are included. Heavy hadron production via nonperturbative fragmentation processes is also discussed. 54 refs., 7 figs.

  4. foundations on expansive soils introduction characteristic

    African Journals Online (AJOL)

    FOUNDATIONS ON EXPANSIVE SOILS. Girma Tessema. Ethiopian Building Construction Authority. Ministry of Construction, Addis Ababa. INTRODUCTION. It is a welJ known fact that expansive soils pose considerable problems in civil engineering constructions. Structures built on such soils show movements which are.

  5. Thermal expansion of doped lanthanum gallates

    Indian Academy of Sciences (India)

    Administrator

    Since the components are in intimate mechanical contact, any stress generated due to their thermal expansion mis- match during thermal cycling could lead to catastrophic failure of the cell. The functional materials must have similar thermal expansions to avoid mechanical stresses. Hence it is useful to study the thermal ...

  6. Series expansion of the modified Einstein Procedure

    Science.gov (United States)

    Seema Chandrakant Shah-Fairbank

    2009-01-01

    This study examines calculating total sediment discharge based on the Modified Einstein Procedure (MEP). A new procedure based on the Series Expansion of the Modified Einstein Procedure (SEMEP) has been developed. This procedure contains four main modifications to MEP. First, SEMEP solves the Einstein integrals quickly and accurately based on a series expansion. Next,...

  7. Thermal expansion of doped lanthanum gallates

    Indian Academy of Sciences (India)

    The dependence of average thermal expansion coefficient (av) on the dopant concentration on either or site of the perovskite structure was found to be linear, when the composition at the other site was kept constant. Mg doping on the -site had a greater effect on the average thermal expansion coefficient than Sr ...

  8. The heavy quark expansion of QCD

    International Nuclear Information System (INIS)

    Falk, A.F.

    1997-01-01

    These lectures contain an elementary introduction to heavy quark symmetry and the heavy quark expansion. Applications such as the expansion of heavy meson decay constants and the treatment of inclusive and exclusive semileptonic B decays are included. Heavy hadron production via nonperturbative fragmentation processes is also discussed. 54 refs., 7 figs

  9. A reduced volumetric expansion factor plot

    Science.gov (United States)

    Hendricks, R. C.

    1979-01-01

    A reduced volumetric expansion factor plot has been constructed for simple fluids which is suitable for engineering computations in heat transfer. Volumetric expansion factors have been found useful in correlating heat transfer data over a wide range of operating conditions including liquids, gases and the near critical region.

  10. Expansion of Einstein-Yang-Mills amplitude

    Science.gov (United States)

    Fu, Chih-Hao; Du, Yi-Jian; Huang, Rijun; Feng, Bo

    2017-09-01

    In this paper, we study from various perspectives the expansion of tree level single trace Einstein-Yang-Mills amplitudes into linear combination of color-ordered Yang-Mills amplitudes. By applying the gauge invariance principle, a programable recursive construction is devised to expand EYM amplitude with arbitrary number of gravitons into EYM amplitudes with fewer gravitons. Based on this recursive technique we write down the complete expansion of any single trace EYM amplitude in the basis of color-order Yang-Mills amplitude. As a byproduct, an algorithm for constructing a polynomial form of the BCJ numerator for Yang-Mills amplitudes is also outlined in this paper. In addition, by applying BCFW recursion relation we show how to arrive at the same EYM amplitude expansion from the on-shell perspective. And we examine the EYM expansion using KLT relations and show how to evaluate the expansion coefficients efficiently.

  11. Maxwell superalgebras and Abelian semigroup expansion

    Directory of Open Access Journals (Sweden)

    P.K. Concha

    2014-09-01

    Full Text Available The Abelian semigroup expansion is a powerful and simple method to derive new Lie algebras from a given one. Recently it was shown that the S-expansion of so(3,2 leads us to the Maxwell algebra M. In this paper we extend this result to superalgebras, by proving that different choices of abelian semigroups S lead to interesting D=4 Maxwell Superalgebras. In particular, the minimal Maxwell superalgebra sM and the N-extended Maxwell superalgebra sM(N recently found by the Maurer–Cartan expansion procedure, are derived alternatively as an S-expansion of osp(4|N. Moreover, we show that new minimal Maxwell superalgebras type sMm+2 and their N-extended generalization can be obtained using the S-expansion procedure.

  12. Measuring $\

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Jessica Sarah [Univ. of Cambridge (United Kingdom)

    2011-01-01

    The MINOS Experiment consists of two steel-scintillator calorimeters, sampling the long baseline NuMI muon neutrino beam. It was designed to make a precise measurement of the ‘atmospheric’ neutrino mixing parameters, Δm2 atm. and sin2 (2 atm.). The Near Detector measures the initial spectrum of the neutrino beam 1km from the production target, and the Far Detector, at a distance of 735 km, measures the impact of oscillations in the neutrino energy spectrum. Work performed to validate the quality of the data collected by the Near Detector is presented as part of this thesis. This thesis primarily details the results of a vμ disappearance analysis, and presents a new sophisticated fitting software framework, which employs a maximum likelihood method to extract the best fit oscillation parameters. The software is entirely decoupled from the extrapolation procedure between the detectors, and is capable of fitting multiple event samples (defined by the selections applied) in parallel, and any combination of energy dependent and independent sources of systematic error. Two techniques to improve the sensitivity of the oscillation measurement were also developed. The inclusion of information on the energy resolution of the neutrino events results in a significant improvement in the allowed region for the oscillation parameters. The degree to which sin2 (2θ )= 1.0 could be disfavoured with the exposure of the current dataset if the true mixing angle was non-maximal, was also investigated, with an improved neutrino energy reconstruction for very low energy events. The best fit oscillation parameters, obtained by the fitting software and incorporating resolution information were: | Δm2| = 2.32+0.12 -0.08×10-3 eV2 and sin2 (2θ ) > 0.90(90% C.L.). The analysis provides the current world best measurement of the atmospheric neutrino mass

  13. Does Avicennia germinans expansion alter salt marsh nitrogen removal capacity?

    Science.gov (United States)

    Tatariw, C.; Kleinhuizen, A.; Rajan, S.; Flournoy, N.; Sobecky, P.; Mortazavi, B.

    2017-12-01

    Plant species expansion poses risks to ecosystem services through alterations to plant-microbiome interactions associated with changes to key microbial drivers such as organic carbon (C) substrates, nitrogen (N) availability, and rhizosphere-associated microbial communities. In the northern Gulf of Mexico (GOM), warming winter temperatures associated with climate change have promoted Avicennia germinans (black mangrove) expansion into salt marshes. To date, there is limited knowledge regarding the effects of mangrove expansion on vital ecosystem services such as N cycling in the northern GOM. We designed a field-based study to determine the potential effects of mangrove expansion on salt marsh N biogeochemical cycling in the Spartina alterniflora dominated Chandeleur Islands (LA, USA). We used a combination of process rate measurements and metadata to: 1) Determine the impact of mangrove expansion on salt marsh denitrification and dissimilatory nitrate reduction to ammonium (DNRA), with the goal of quantifying losses or gains in ecosystem services; and 2) identify the mechanisms driving changes in ecosystem services to improve predictions about the impacts of mangrove expansion on salt marsh functional resiliency. The pneumatophore root structure of A. germinans is efficient at delivering oxygen (O2) to sediment, which can promote coupled nitrification-denitrification and decrease sulfide inhibition. We hypothesized that increased sediment O2, when coupled with cooler soil temperatures caused by plant shading, will favor denitrification instead of the DNRA process. An increase in sediment O2, as well as higher N content of A. germinans litter, will also result in a shift in the microbial community. Initial findings indicated that the denitrification pathway dominates over DNRA regardless of vegetation type, with average denitrification rates of 30.1 µmol N kg-1 h-1 versus average DNRA rates of 8.5 µmol N kg-1 h-1. However, neither denitrification nor DNRA rates

  14. Negative thermal expansion in Sc2(WO4)3

    International Nuclear Information System (INIS)

    Evans, J.S.O.; Mary, T.A.; Sleight, A.W.

    1998-01-01

    Sc 2 (WO 4 ) 3 has been found to show the highly unusual property of negative thermal expansion over a temperature range of 10 to 1,073 K. Powder neutron diffraction data from 10 to 450 K shows an essentially linear decrease in cell volume as a function of temperature. The intrinsic linear coefficient of thermal expansion from this data is -2.2 x 10 -6 K -1 . The linear coefficient of thermal expansion measured on a ceramic bar of Sc 2 (WO 4 ) 3 can be as negative as -11 x 10 -6 K -1 due to microstructure changes as a function of temperature. Rietveld refinement as a function of temperature suggests that the intrinsic negative thermal expansion can be related to transverse vibrations of bridging oxygen atoms in the structure. The anharmonic nature of these vibrations leads to a coupled tilting of the quasi-rigid framework polyhedra. This tilting in turn causes the structure to become more dense with increasing temperature

  15. Correlation of cutaneous tension distribution and tissue oxygenation with acute external tissue expansion

    Directory of Open Access Journals (Sweden)

    Marquardt C

    2009-11-01

    Full Text Available Abstract Today, the biomechanical fundamentals of skin expansion are based on viscoelastic models of the skin. Although many studies have been conducted in vitro, analyses performed in vivo are rare. Here, we present in vivo measurements of the expansion at the skin surface as well as measurement of the corresponding intracutaneous oxygen partial pressure. In our study the average skin stretching was 24%, with a standard deviation of 11%, excluding age or gender dependency. The measurement of intracutaneous oxygen partial pressure produced strong inter-individual fluctuations, including initial values at the beginning of the measurement, as well as varying individual patient reactions to expansion of the skin. Taken together, we propose that even large defect wounds can be closed successfully using the mass displacement caused by expansion especially in areas where soft, voluminous tissue layers are present.

  16. Giant negative thermal expansion in magnetic nanocrystals.

    Science.gov (United States)

    Zheng, X G; Kubozono, H; Yamada, H; Kato, K; Ishiwata, Y; Xu, C N

    2008-12-01

    Most solids expand when they are heated, but a property known as negative thermal expansion has been observed in a number of materials, including the oxide ZrW2O8 (ref. 1) and the framework material ZnxCd1-x(CN)2 (refs 2,3). This unusual behaviour can be understood in terms of low-energy phonons, while the colossal values of both positive and negative thermal expansion recently observed in another framework material, Ag3[Co(CN)6], have been explained in terms of the geometric flexibility of its metal-cyanide-metal linkages. Thermal expansion can also be stopped in some magnetic transition metal alloys below their magnetic ordering temperature, a phenomenon known as the Invar effect, and the possibility of exploiting materials with tuneable positive or negative thermal expansion in industrial applications has led to intense interest in both the Invar effect and negative thermal expansion. Here we report the results of thermal expansion experiments on three magnetic nanocrystals-CuO, MnF2 and NiO-and find evidence for negative thermal expansion in both CuO and MnF2 below their magnetic ordering temperatures, but not in NiO. Larger particles of CuO and MnF2 also show prominent magnetostriction (that is, they change shape in response to an applied magnetic field), which results in significantly reduced thermal expansion below their magnetic ordering temperatures; this behaviour is not observed in NiO. We propose that the negative thermal expansion effect in CuO (which is four times larger than that observed in ZrW2O8) and MnF2 is a general property of nanoparticles in which there is strong coupling between magnetism and the crystal lattice.

  17. Two-point density correlations of quasicondensates in free expansion

    DEFF Research Database (Denmark)

    Manz, S.; Bücker, R.; Betz, T.

    2010-01-01

    We measure the two-point density correlation function of freely expanding quasicondensates in the weakly interacting quasi-one-dimensional (1D) regime. While initially suppressed in the trap, density fluctuations emerge gradually during expansion as a result of initial phase fluctuations present ...... with a recent theoretical approach described by Imambekov yields good agreement with our experimental results and shows that density correlations can be used for thermometry of quasicondensates....

  18. Some Improved Nonperturbative Bounds for Fermionic Expansions

    Energy Technology Data Exchange (ETDEWEB)

    Lohmann, Martin, E-mail: marlohmann@gmail.com [Universita di Roma Tre, Dipartimento di Matematica (Italy)

    2016-06-15

    We reconsider the Gram-Hadamard bound as it is used in constructive quantum field theory and many body physics to prove convergence of Fermionic perturbative expansions. Our approach uses a recursion for the amplitudes of the expansion, discovered in a model problem by Djokic (2013). It explains the standard way to bound the expansion from a new point of view, and for some of the amplitudes provides new bounds, which avoid the use of Fourier transform, and are therefore superior to the standard bounds for models like the cold interacting Fermi gas.

  19. Cosmic growth history and expansion history

    International Nuclear Information System (INIS)

    Linder, Eric V.

    2005-01-01

    The cosmic expansion history tests the dynamics of the global evolution of the universe and its energy density contents, while the cosmic growth history tests the evolution of the inhomogeneous part of the energy density. Precision comparison of the two histories can distinguish the nature of the physics responsible for the accelerating cosmic expansion: an additional smooth component--dark energy--or a modification of the gravitational field equations. With the aid of a new fitting formula for linear perturbation growth accurate to 0.05%-0.2%, we separate out the growth dependence on the expansion history and introduce a new growth index parameter γ that quantifies the gravitational modification

  20. Born expansions for charged particle scattering

    International Nuclear Information System (INIS)

    Macek, J.H.; Barrachina, R.O.

    1989-01-01

    High-order terms in Born expansions of scattering amplitudes in powers of charge are frequently divergent when long-range Coulomb interactions are present asymptotically. Expansions which are free from these logarithmic divergences have been constructed recently. We illustrate these expansions with the simplest example, namely the non-relativistic Rutherford scattering of two charged particles. This approach represents an adequate framework for the calculation of transition amplitudes and a comprehensive starting point for the development of consistent perturbation approximations in multi-channel descriptions of strongly interacting atomic systems. 17 refs

  1. Oblique photon expansion of QED structure functions

    International Nuclear Information System (INIS)

    Chahine, C.

    1986-01-01

    In the oblique photon expansion, the collinear part of photon emission is summed up to all orders in perturbation theory. The number of oblique or non-collinear photons is the expansion order. Unlike in perturbation theory, every term of the expansion is both infrared finite and gauge invariant. The zero oblique photon contribution to the electromagnetic structure tensor in QED is computed in detail. The behaviors of the structure functions F1 and F2 are discussed in the soft and ultra-soft limits

  2. Decennial plan of expansion 1994-2003

    International Nuclear Information System (INIS)

    1993-12-01

    The Decennial Plan of Expansion 1994-2003 of Electric sector reproduces the results of the studies occurred during the planning cycle of 1992/93 from the Coordinator Groups of the Electric System Planning. Based in the market forecasting, economic-financier and time for finishing the the works, the Decennial Plan of Expansion presents the schedule of the main generation and transmission works for the next ten years, the annual spend in generation, transmission and distribution, the costs of expansion and the evaluation of attending conditions in electric system in Brazil. (C.G.C.)

  3. Synthesis of Expansive Mortar Developed in Laboratory for Dismounting of Ornamental Rocks

    International Nuclear Information System (INIS)

    Lucena D V; Campos D B C; Lira H L; Neves G A

    2011-01-01

    The expansive mortar is constituted by a mixture of watery phase with an agent expander, when hydrated, presents volume increase and the generation of fictions in the rock due to generated pressure. The objective of this work is to synthecize expansive mortar that they present enough expansive pressure for the dismounting of granite and marble. They had been used as raw materials: carbonate of calcium, Portland cement and additives for control of the expansion. The formularizations had been synthecized on the basis of the chemical analysis of a mortar commercial and characterized by XRD, laser particle size measurements and evaluation of expansive pressure. All the developed formularizations had presented similar characteristics to the ones of the commercial mortar.

  4. The origin of early age expansions induced in cementitious materials containing shrinkage reducing admixtures

    International Nuclear Information System (INIS)

    Sant, Gaurav; Lothenbach, Barbara; Juilland, Patrick; Le Saout, Gwenn; Weiss, Jason; Scrivener, Karen

    2011-01-01

    Studies on the early-age shrinkage behavior of cement pastes, mortars, and concretes containing shrinkage reducing admixtures (SRAs) have indicated these mixtures frequently exhibit an expansion shortly after setting. While the magnitude of the expansion has been noted to be a function of the chemistry of the cement and the admixture dosage; the cause of the expansion is not clearly understood. This investigation uses measurements of autogenous deformation, X-ray diffraction, pore solution analysis, thermogravimetry, and scanning electron microscopy to study the early-age properties and describe the mechanism of the expansion in OPC pastes made with and without SRA. The composition of the pore solution indicates that the presence of the SRA increases the portlandite oversaturation level in solution which can result in higher crystallization stresses which could lead to an expansion. This observation is supported by deformation calculations for the systems examined.

  5. Anharmonicity and Quantum Effects in Thermal Expansion of an Invar Alloy

    Science.gov (United States)

    Yokoyama, Toshihiko; Eguchi, Keitaro

    2011-08-01

    We have investigated the anharmonicity and quantum effects in the Invar alloy Fe64.6Ni35.4 that shows anomalously small thermal expansion. We have performed Fe and Ni K-edge extended x-ray-absorption fine-structure spectroscopic measurements and the computational simulations based on the path-integral effective-classical-potential theory. The first nearest-neighbor (NN) shells around Fe show almost no thermal expansion, while those around Ni exhibit meaningful but smaller expansion than that of fcc Ni. At low temperature, the quantum effect is found to play an essentially important role, which is confirmed by comparing the quantum-mechanical simulations to the classical ones. The anharmonicity (asymmetric distribution) clearly exists for all the first NN shells as in normal thermal expansion systems, implying the breakdown of the direct correspondence between thermal expansion and anharmonicity.

  6. Compression and expansion in central collisions

    International Nuclear Information System (INIS)

    Danielewicz, P.

    1997-01-01

    Dynamics of central collisions of heavy nuclei in the energy range from few tens of MeV/nucleon to a couple of GeV/nucleon is discussed. As the beam energy increases and/or the impact parameter decreases, the maximum compression increases. It is argued that the hydrodynamic behaviour of matter sets in the vicinity of balance energy. At higher energies shock fronts are observed to form within head-on reaction simulations, perpendicular to beam axis and separating hot compressed matter from cold. In the semi-central reactions a weak tangential discontinuity develops in-between these fronts. The hot compressed matter exposed to the vacuum in directions parallel to the shock front begin to expand collectively into these directions. The expansion affects particle angular distributions and mean energy components and further shapes of spectra and mean energies of particles emitted into any one direction. The variation of slopes and the relative yields measured within the FOPI collaboration are in a general agreement with the results of simulations. As to the FOPI data on stopping, they are consistent with the preference for transverse over the longitudinal motion in the head-on Au + Au collisions. Unfortunately, though, the data can not be used to decide directly on that preference due to acceptance cuts. Tied to the spatial and temporal changes in the reactions are changes in the entropy per nucleon. (authors)

  7. Semiquantum chaos and the large N expansion

    Energy Technology Data Exchange (ETDEWEB)

    Cooper, F.; Habib, S.; Kluger, Y. [Los Alamos National Lab., NM (United States); Dawson, J.; Meredith, D.; Shepard, H. [New Hampshire Univ., Durham, NH (United States). Dept. of Physics

    1994-06-29

    When a classical oscillator is interacting with a purely quantum mechanical oscillator, described by the Lagrangian L = 1/2 x{sup 2} + 1/2A{sup 2} - 1/2 (m{sup 2} + e{sup 2} A{sup 2})x{sup 2}, where A is a classical variable and x is a quantum operator the relevant degrees of freedom for the quantum oscillator when {l_angle}x(t)x(t){r_angle} = G(t). The classical Hamiltonian dynamics governing the variables A(t). {Pi}{sub A}(t). G(t) and {Pi}{sub G}(t) is chaotic so that the results of making measurements on the quantum system at later times are sensitive to initial conditions. We review this system and discuss how this behavior is altered when the quantum fluctuations of the A oscillator are determined exactly and in a 1/N expansion where N is the number of copies of the x oscillator.

  8. Experimental Investigation of Reynolds Number Effects on Test Quality in a Hypersonic Expansion Tube

    Science.gov (United States)

    Rossmann, Tobias; Devin, Alyssa; Shi, Wen; Verhoog, Charles

    2017-11-01

    Reynolds number effects on test time and the temporal and spatial flow quality in a hypersonic expansion tube are explored using high-speed pressure, infrared optical, and Schlieren imaging measurements. Boundary layer models for shock tube flows are fairly well established to assist in the determination of test time and flow dimensions at typical high enthalpy test conditions. However, the application of these models needs to be more fully explored due to the unsteady expansion of turbulent boundary layers and contact regions separating dissimilar gasses present in expansion tube flows. Additionally, expansion tubes rely on the development of a steady jet with a large enough core-flow region at the exit of the acceleration tube to create a constant velocity region inside of the test section. High-speed measurements of pressure and Mach number at several locations within the expansion tube allow for the determination of an experimental x-t diagram. The comparison of the experimentally determined x-t diagram to theoretical highlights the Reynolds number dependent effects on expansion tube. Additionally, spatially resolved measurements of the Reynolds number dependent, steady core-flow in the expansion tube viewing section are shown. NSF MRI CBET #1531475, Lafayette College, McCutcheon Foundation.

  9. Increased pulmonary vascular permeability as a cause of re-expansion edema in rabbits

    International Nuclear Information System (INIS)

    Pavlin, D.J.; Nessly, M.L.; Cheney, F.W.

    1981-01-01

    In order to study the mechanism(s) underlying re-expansion edema, we measured the concentration of labeled albumin (RISA) in the extravascular, extracellular water (EVECW) of the lung as a measure of pulmonary vascular permeability. Re-expansion edema was first induced by rapid re-expansion of rabbit lungs that had been collapsed for 1 wk by pneumothorax. The RISA in EVECW was expressed as a fraction of its plasma concentration: (RISA)L/(RISA)PL. The volume of EVECW (ml/gm dry lung) was measured using a 24 Na indicator. Results in re-expansion edema were compared with normal control lungs and with oleic acid edema as a model of permeability edema. In re-expanded lungs, EVECW (3.41 +/- SD 1.24 ml/g) and (RISA)L/(RISA)PL 0.84 +/- SD 0.15) were significantly increased when compared with normal control lungs (2.25 +/- 0.41 ml/g and 0.51 +/- 0.20, respectively). Results in oleic acid edema (5.66 +/- 2.23 ml/g and 0.84 +/- 0.23) were similar to re-expansion edema. This suggested that re-expansion edema is due to increased pulmonary vascular permeability caused by mechanical stresses applied to the lung during re-expansion

  10. Expansion reduction of clayey soils through Surcharge application and Lime Treatment

    Directory of Open Access Journals (Sweden)

    T. López-Lara

    2017-12-01

    Full Text Available Expansive clayey soils produce heaving and cracking of floor slabs and walls. Expansive soils owe their characteristics to the presence of swelling clay minerals. This soil expands and contracts due to changes in the moisture content of the soil. In this study the surcharge required to counteract soil expansion was measured in natural expansive soils (untreated soils and lime treated soils starting at 19.61 kPa (2 Ton/m2 and continuing with increments of 19.61 kPa. Additionaly in lime treated soils the amount of lime was determined under different surcharges in order to reduce the expansion. The test results indicated that the surcharges applied to untreated soils were not proportional to the decrease of expansion which is probably due to the increase of soil density. In fact, only the initial surcharge of 19.61 kPa significantly decreased the expansion. According to the results, the soil expansion was considerably reduced (1.54% with the surcharge of 78.45 kPa, therefore this surcharge can be considered as the Swelling pressure. On the other hand the soil tested (high compressibility clay was stabilized with 6% of lime (without surcharges which was determined with the lowest value of liquid limit and plastic index as well as expansion test. After the application of surcharges and lime treatment to expansive soil, the surcharges of 39.22 kPa and 58.84 kPa decreased expansion and increased their resistance. This was concluded by similar low values of expansion (without settlements under both surcharges of each treated soil tested (2, 4 and 6% of lime. It can be concluded that the surcharge contributed to the decrease of soil expansion due to the decrease of the amount of lime required (6% without surcharge. So, 4% of lime was enough for the surcharge of 19.61 kPa and 2% of lime required the surcharge minimum of 39.22 kPa. This shows that the surcharge of a house on expansive soil reduces soil expansion and therefore reduces costs of any

  11. Adapted polynomial chaos expansion for failure detection

    International Nuclear Information System (INIS)

    Paffrath, M.; Wever, U.

    2007-01-01

    In this paper, we consider two methods of computation of failure probabilities by adapted polynomial chaos expansions. The performance of the two methods is demonstrated by a predator-prey model and a chemical reaction problem

  12. Secret-key expansion from covert communication

    Science.gov (United States)

    Arrazola, Juan Miguel; Amiri, Ryan

    2018-02-01

    Covert communication allows the transmission of messages in such a way that it is not possible for adversaries to detect that the communication is occurring. This provides protection in situations where knowledge that two parties are talking to each other may be incriminating to them. In this work, we study how covert communication can be used for a different purpose: secret key expansion. First, we show that any message transmitted in a secure covert protocol is also secret and therefore unknown to an adversary. We then propose a covert communication protocol where the amount of key consumed in the protocol is smaller than the transmitted key, thus leading to secure secret key expansion. We derive precise conditions for secret key expansion to occur, showing that it is possible when there are sufficiently low levels of noise for a given security level. We conclude by examining how secret key expansion from covert communication can be performed in a computational security model.

  13. Magnetized relativistic electron-ion plasma expansion

    Science.gov (United States)

    Benkhelifa, El-Amine; Djebli, Mourad

    2016-03-01

    The dynamics of relativistic laser-produced plasma expansion across a transverse magnetic field is investigated. Based on a one dimensional two-fluid model that includes pressure, enthalpy, and rest mass energy, the expansion is studied in the limit of λD (Debye length) ≤RL (Larmor radius) for magnetized electrons and ions. Numerical investigation conducted for a quasi-neutral plasma showed that the σ parameter describing the initial plasma magnetization, and the plasma β parameter, which is the ratio of kinetic to magnetic pressure are the key parameters governing the expansion dynamics. For σ ≪ 1, ion's front shows oscillations associated to the break-down of quasi-neutrality. This is due to the strong constraining effect and confinement of the magnetic field, which acts as a retarding medium slowing the plasma expansion.

  14. Chemical graph-theoretic cluster expansions

    International Nuclear Information System (INIS)

    Klein, D.J.

    1986-01-01

    A general computationally amenable chemico-graph-theoretic cluster expansion method is suggested as a paradigm for incorporation of chemical structure concepts in a systematic manner. The cluster expansion approach is presented in a formalism general enough to cover a variety of empirical, semiempirical, and even ab initio applications. Formally such approaches for the utilization of chemical structure-related concepts may be viewed as discrete analogues of Taylor series expansions. The efficacy of the chemical structure concepts then is simply bound up in the rate of convergence of the cluster expansions. In many empirical applications, e.g., boiling points, chromatographic separation coefficients, and biological activities, this rate of convergence has been observed to be quite rapid. More note will be made here of quantum chemical applications. Relations to questions concerning size extensivity of energies and size consistency of wave functions are addressed

  15. Low expansion superalloy with improved toughness

    Science.gov (United States)

    Smith, Darrell F.; Stein, Larry I.; Hwang, Il S.

    1995-01-01

    A high strength, low coefficient of thermal expansion superalloy exhibiting improved toughness over a broad temperature range down to about 4.degree. K. The composition is adapted for use with wrought superconducting sheathing.

  16. Boson expansion theory in the seniority scheme

    International Nuclear Information System (INIS)

    Tamura, T.; Li, C.; Pedrocchi, V.G.

    1985-01-01

    A boson expansion formalism in the seniority scheme is presented and its relation with number-conserving quasiparticle calculations is elucidated. Accuracy and convergence are demonstrated numerically. A comparative discussion with other related approaches is given

  17. On Learning Ring-Sum-Expansions

    DEFF Research Database (Denmark)

    Fischer, Paul; Simon, H. -U.

    1992-01-01

    The problem of learning ring-sum-expansions from examples is studied. Ring-sum-expansions (RSE) are representations of Boolean functions over the base {#123;small infinum, (+), 1}#125;, which reflect arithmetic operations in GF(2). k-RSE is the class of ring-sum-expansions containing only monomials...... of length at most k:. term-RSE is the class of ring-sum-expansions having at most I: monomials. It is shown that k-RSE, k>or=1, is learnable while k-term-RSE, k>2, is not learnable if RPnot=NP. Without using a complexity-theoretical hypothesis, it is proven that k-RSE, k>or=1, and k-term-RSE, k>or=2 cannot...

  18. Instability of palatal rugae following rapid maxillary expansion.

    Science.gov (United States)

    Saadeh, Maria; Macari, Anthony; Haddad, Ramzi; Ghafari, Joseph

    2017-10-01

    Existing evidence on changes of the palatal rugae following rapid maxillary expansion (RME) is scarce and inconclusive, particularly immediate post-expansion changes in three-dimensional assessments. Our aims were to assess the dimensional stability of the palatal rugae in the antero-posterior and transverse dimensions following RME treatment, as well as the three-dimensional changes in palatal volume and area. The sample consisted of the dental casts of 30 adolescents (16 males; 14 females, age 11.46 ± 1.42 years) who underwent RME. The models, available at T1 (pretreatment) and T2 (immediately after expansion) were scanned using a laser scanning system. Various parameters were recorded including individual ruga transverse and antero-posterior linear and angular measurements; palatal dimensions (width, length, volume, surface area, vault depth/height); and dental characteristics (interincisor, intercanine, interpremolar, and intermolar distances). Statistical analyses included paired t-tests for group comparisons, and Pearson moment product for associations among variables. Palatal rugae were altered by RME in all dimensions in both linear and angular measurements, almost equally on right and left sides, albeit the average linear changes were about 1 mm. Correlation coefficients among rugal and dental measures suggested an association between rugae changes and the underlying bony movements. Except for the first rugae that had higher correlations to the intercanine width, the correspondence of changes seems to be asymmetric, thus not precisely predictable. The results suggest a variable trend in the rugae response to expansion, likely reflecting the constitutional asymmetric pattern or nature of pairs of rugae. © The Author 2017. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

  19. Expansion of the whole wheat flour extrusion

    OpenAIRE

    Cheng, Hongyuan; Friis, Alan

    2008-01-01

    A new model framework is proposed to describe the expansion of extrudates with extruder operating conditions based on dimensional analysis principle. The Buckingham pi dimensional analysis method is applied to form the basic structure of the model from extrusion process operational parameters. Using the Central Composite Design (CCD) method, whole wheat flour was processed in a twin-screw extruder with 16 trials. The proposed model can well correlate the expansion of the 16 trials using 3 reg...

  20. Resolution of hydrodynamical equations for transverse expansions

    International Nuclear Information System (INIS)

    Hama, Y.; Pottag, F.W.

    1984-01-01

    The three-dimensional hydrodynamical expansion is treated with a method similar to that of Milekhin, but more explicit. Although in the final stage one have to appeal to numerical calculation, the partial differential equations governing the transverse expansions are treated without transforming them into ordinary equations with an introduction of averaged quantities. It is only concerned with the formalism and the numerical results will be given in the next paper. (Author) [pt

  1. Mitochondrial footprints of human expansions in Africa.

    OpenAIRE

    Watson, E; Forster, P; Richards, M; Bandelt, H J

    1997-01-01

    mtDNA studies support an African origin for modern Eurasians, but expansion events within Africa have not previously been investigated. We have therefore analyzed 407 mtDNA control-region sequences from 13 African ethnic groups. A number of sequences (13%) were highly divergent and coalesced on the "mitochondrial Eve" in Africans. The remaining sequences also ultimately coalesced on this sequence but fell into four major clusters whose starlike phylogenies testify to demographic expansions. T...

  2. Negative thermal expansion in framework compounds

    Indian Academy of Sciences (India)

    2015-11-27

    Nov 27, 2015 ... We have studied negative thermal expansion (NTE) compounds with chemi- cal compositions of NX2O8 and NX2O7 (N=Zr, Hf and X=W, Mo, V) and M2O (M=Cu, Ag) using the techniques of inelastic neutron scattering and lattice dynamics. There is a large variation in the negative thermal expansion ...

  3. Thermal expansion behavior in fabricated cellular structures

    International Nuclear Information System (INIS)

    Oruganti, R.K.; Ghosh, A.K.; Mazumder, J.

    2004-01-01

    Thermal expansion behavior of cellular structures is of interest in applications where undesirable deformation and failure are caused by thermal expansion mismatch. This report describes the role of processing-induced effects and metallurgical aspects of melt-processed cellular structures, such as a bi-material structure designed to contract on heating, as well as uni-material structures of regular and stochastic topology. This bi-material structure utilized the principle of internal geometric constraints to alter the expansion behavior of the internal ligaments to create overall contraction of the structure. Homogenization design method was used to design the structure, and fabrication was by direct metal deposition by laser melting of powder in another part of a joint effort. The degree of porosity and grain size in the fabricated structure are characterized and related to the laser deposition parameters. The structure was found to contract upon heating over a short range of temperature subsequent to which normal expansion ensued. Also examined in this report are uni-material cellular structures, in which internal constraints arise from residual stress variations caused by the fabrication process, and thereby alter their expansion characteristics. A simple analysis of thermal strain of this material supports the observed thermal expansion behavior

  4. Thin foil expansion into a vacuum

    International Nuclear Information System (INIS)

    Mora, P.

    2005-01-01

    Plasma expansion into a vacuum is an old problem which has been renewed recently in various contexts: expansion of ultra-cold plasmas, cluster expansion, of dust grains, expansion of thin foils. In this presentation I will first discuss the physics of the expansion of a thin foil irradiated by an ultra-short ultra-intense laser pulse. The expansion results in the formation of high energy ions. For an infinitely steep plasma-vacuum interface the fastest ions are located in the outer part of the expansion and their velocity is given by ν m ax∼ 2 C s (In ω p it) where c s (Zk B T e /m i )''1/2 is the ion-acoustic velocity ω p i=(n e 0Ze''2/m i e 0 )''1/2 is the ion plasma frequency, n e 0 is the electron density in the unperturbed plasma, Z is the ion charge number. In the above expression, t is either the pulse duration or the effective acceleration time (in particular t∼L/2c s , where L is the width of the foil, when the electron cooling is taken into account). A salient characteristic of the expansion is the occurrence of a double layer structure and a peak of the accelerating electric field at the ion front. I will explain the origin of the peak and predict its temporal behavior. This peak has been diagnosed in recent experiments. I will also discuss the effect of a 2-temperatures electron distribution function on the expansion, showing the dominant role of the hot electron component. Finally I will discuss the occurrence of ion spikes in the expansion when the initial density profile is smooth. The ion spike is due to a wave breaking which cannot be handled in a satisfactory way by a fluid code and requires a kinetic description. A. simple collisionless particle code has been used to treat the evolution of the spike after the wave breaking and the results will be shown. (Author)

  5. Adiabatic Expansion of Electron Gas in a Magnetic Nozzle

    Science.gov (United States)

    Takahashi, Kazunori; Charles, Christine; Boswell, Rod; Ando, Akira

    2018-01-01

    A specially constructed experiment shows the near perfect adiabatic expansion of an ideal electron gas resulting in a polytropic index greater than 1.4, approaching the adiabatic value of 5 /3 , when removing electric fields from the system, while the polytropic index close to unity is observed when the electrons are trapped by the electric fields. The measurements were made on collisionless electrons in an argon plasma expanding in a magnetic nozzle. The collision lengths of all electron collision processes are greater than the scale length of the expansion, meaning the system cannot be in thermodynamic equilibrium, yet thermodynamic concepts can be used, with caution, in explaining the results. In particular, a Lorentz force, created by inhomogeneities in the radial plasma density, does work on the expanding magnetic field, reducing the internal energy of the electron gas that behaves as an adiabatically expanding ideal gas.

  6. The expansion of the universe observed with supernovae.

    Science.gov (United States)

    Astier, Pierre

    2012-11-01

    Over the last 20 years, supernovae have become a key tool to constrain the expansion history of the Universe through the construction of Hubble diagrams, using luminosity distances to supernovae belonging to the 'Ia' subtype. This technique was key for the discovery that the expansion of the Universe is now accelerating. We review the principle and difficulties of the measurements, the classification and diversity of supernovae, and the physics of explosion. We discuss the systematic uncertainties affecting the cosmological conclusions with some emphasis on photometric calibration. We describe the major supernova cosmology surveys, the presented analyses and their conclusions, together with the present status of the field. We conclude on the expectations for the near future.

  7. Negative thermal expansion materials: technological key for control of thermal expansion.

    Science.gov (United States)

    Takenaka, Koshi

    2012-02-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over -30 ppm K -1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

  8. Negative thermal expansion materials: technological key for control of thermal expansion

    Directory of Open Access Journals (Sweden)

    Koshi Takenaka

    2012-01-01

    Full Text Available Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K−1. Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade.

  9. Negative thermal expansion materials: technological key for control of thermal expansion

    International Nuclear Information System (INIS)

    Takenaka, Koshi

    2012-01-01

    Most materials expand upon heating. However, although rare, some materials contract upon heating. Such negative thermal expansion (NTE) materials have enormous industrial merit because they can control the thermal expansion of materials. Recent progress in materials research enables us to obtain materials exhibiting negative coefficients of linear thermal expansion over −30 ppm K −1 . Such giant NTE is opening a new phase of control of thermal expansion in composites. Specifically examining practical aspects, this review briefly summarizes materials and mechanisms of NTE as well as composites containing NTE materials, based mainly on activities of the last decade. (topical review)

  10. The thermal expansion of hard magnetic materials of the Nd-Fe-B system

    Science.gov (United States)

    Savchenko, Igor; Kozlovskii, Yurii; Samoshkin, Dmitriy; Yatsuk, Oleg

    2017-10-01

    The results of dilatometric measurement of the thermal expansion of hard magnetic materials brands N35M, N35H and N35SH containing as a main component the crystalline phase of Nd2Fe14B type are presented. The temperature range from 200 to 750 K has been investigated by the method of dilatometry with an error of 1.5-2×10-7 K-1. The approximation dependences of the linear thermal expansion coefficient have been obtained. The character of changes of the thermal coefficient of linear expansion in the region of the Curie point has been specified, its critical indices and critical amplitudes have been defined.

  11. Gravity waves as a probe of the Hubble expansion rate during an electroweak scale phase transition

    International Nuclear Information System (INIS)

    Chung, Daniel J. H.; Zhou Peng

    2010-01-01

    Just as big bang nucleosynthesis allows us to probe the expansion rate when the temperature of the Universe was around 1 MeV, the measurement of gravity waves from electroweak scale first order phase transitions may allow us to probe the expansion rate when the temperature of the Universe was at the electroweak scale. We compute the simple transformation rule for the gravity wave spectrum under the scaling transformation of the Hubble expansion rate. We then apply this directly to the scenario of quintessence kination domination and show how gravity wave spectra would shift relative to Laser Interferometer Space Antenna and Big Bang Observer projected sensitivities.

  12. Considering FACTS in Optimal Transmission Expansion Planning

    Directory of Open Access Journals (Sweden)

    K. Soleimani

    2017-10-01

    Full Text Available The expansion of power transmission systems is an important part of the expansion of power systems that requires enormous investment costs. Since the construction of new transmission lines is very expensive, it is necessary to choose the most efficient expansion plan that ensures system security with a minimal number of new lines. In this paper, the role of Flexible AC Transmission System (FACTS devices in the effective operation and expansion planning of transmission systems is examined. Effort was taken to implement a method based on sensitivity analysis to select the optimal number and location of FACTS devices, lines and other elements of the transmission system. Using this method, the transmission expansion plan for a 9 and a 39 bus power system was performed with and without the presence of FACTS with the use of DPL environment in Digsilent software 15.1. Results show that the use of these devices reduces the need for new transmission lines and minimizes the investment cost.

  13. Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

    Science.gov (United States)

    Shen, Fei-Ran; Kuang, Hao; Hu, Feng-Xia; Wu, Hui; Huang, Qing-Zhen; Liang, Fei-Xiang; Qiao, Kai-Ming; Li, Jia; Wang, Jing; Liu, Yao; Zhang, Lei; He, Min; Zhang, Ying; Zuo, Wen-Liang; Sun, Ji-Rong; Shen, Bao-Gen

    2017-10-01

    Materials with zero thermal expansion (ZTE) or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE) materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn-Co-Ge-In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE owing to a martensitic magnetostructural transition. The major finding is that the thermal expansion behavior can be totally controlled by modulating the crystallinity degree and phase transition from atomic scale. Self-compensation effect leads to ultra-low thermal expansion with a linear expansion coefficient as small as +0.68 × 10-6/K over a wide temperature range around room temperature. The present study opens an avenue to reach ZTE particularly from the large class of giant NTE materials based on phase transition.

  14. Ultra-low thermal expansion realized in giant negative thermal expansion materials through self-compensation

    Directory of Open Access Journals (Sweden)

    Fei-Ran Shen

    2017-10-01

    Full Text Available Materials with zero thermal expansion (ZTE or precisely tailored thermal expansion are in urgent demand of modern industries. However, the overwhelming majority of materials show positive thermal expansion. To develop ZTE or negative thermal expansion (NTE materials as compensators has become an important challenge. Here, we present the evidence for the realization of ultra-low thermal expansion in Mn–Co–Ge–In particles. The bulk with the Ni2In-type hexagonal structure undergoes giant NTE owing to a martensitic magnetostructural transition. The major finding is that the thermal expansion behavior can be totally controlled by modulating the crystallinity degree and phase transition from atomic scale. Self-compensation effect leads to ultra-low thermal expansion with a linear expansion coefficient as small as +0.68 × 10−6/K over a wide temperature range around room temperature. The present study opens an avenue to reach ZTE particularly from the large class of giant NTE materials based on phase transition.

  15. DNA triplet repeat expansion and mismatch repair.

    Science.gov (United States)

    Iyer, Ravi R; Pluciennik, Anna; Napierala, Marek; Wells, Robert D

    2015-01-01

    DNA mismatch repair is a conserved antimutagenic pathway that maintains genomic stability through rectification of DNA replication errors and attenuation of chromosomal rearrangements. Paradoxically, mutagenic action of mismatch repair has been implicated as a cause of triplet repeat expansions that cause neurological diseases such as Huntington disease and myotonic dystrophy. This mutagenic process requires the mismatch recognition factor MutSβ and the MutLα (and/or possibly MutLγ) endonuclease, and is thought to be triggered by the transient formation of unusual DNA structures within the expanded triplet repeat element. This review summarizes the current knowledge of DNA mismatch repair involvement in triplet repeat expansion, which encompasses in vitro biochemical findings, cellular studies, and various in vivo transgenic animal model experiments. We present current mechanistic hypotheses regarding mismatch repair protein function in mediating triplet repeat expansions and discuss potential therapeutic approaches targeting the mismatch repair pathway.

  16. Anisotropic thermal expansion in flexible materials

    Science.gov (United States)

    Romao, Carl P.

    2017-10-01

    A definition of the Grüneisen parameters for anisotropic materials is derived based on the response of phonon frequencies to uniaxial stress perturbations. This Grüneisen model relates the thermal expansion in a given direction (αi i) to one element of the elastic compliance tensor, which corresponds to the Young's modulus in that direction (Yi i). The model is tested through ab initio prediction of thermal expansion in zinc, graphite, and calcite using density functional perturbation theory, indicating that it could lead to increased accuracy for structurally complex systems. The direct dependence of αi i on Yi i suggests that materials which are flexible along their principal axes but rigid in other directions will generally display both positive and negative thermal expansion.

  17. Radial expansion for spinning conformal blocks

    CERN Document Server

    Costa, Miguel S.; Penedones, João; Trevisani, Emilio

    2016-07-12

    This paper develops a method to compute any bosonic conformal block as a series expansion in the optimal radial coordinate introduced by Hogervorst and Rychkov. The method reduces to the known result when the external operators are all the same scalar operator, but it allows to compute conformal blocks for external operators with spin. Moreover, we explain how to write closed form recursion relations for the coefficients of the expansions. We study three examples of four point functions in detail: one vector and three scalars; two vectors and two scalars; two spin 2 tensors and two scalars. Finally, for the case of two external vectors, we also provide a more efficient way to generate the series expansion using the analytic structure of the blocks as a function of the scaling dimension of the exchanged operator.

  18. Synthesis, Structure, and Rigid Unit Mode-like Anisotropic Thermal Expansion of BaIr2In9.

    Science.gov (United States)

    Calta, Nicholas P; Han, Fei; Kanatzidis, Mercouri G

    2015-09-08

    This Article reports the synthesis of large single crystals of BaIr2In9 using In flux and their characterization by variable-temperature single-crystal and synchrotron powder X-ray diffraction, resistivity, and magnetization measurements. The title compound adopts the BaFe2Al9-type structure in the space group P6/mmm with room temperature unit cell parameters a = 8.8548(6) Å and c = 4.2696(4) Å. BaIr2In9 exhibits anisotropic thermal expansion behavior with linear expansion along the c axis more than 3 times larger than expansion in the ab plane between 90 and 400 K. This anisotropic expansion originates from a rigid unit mode-like mechanism similar to the mechanism of zero and negative thermal expansion observed in many anomalous thermal expansion materials such as ZrW2O8 and ScF3.

  19. Shrub expansion in tundra ecosystems: dynamics, impacts and research priorities

    International Nuclear Information System (INIS)

    Myers-Smith, Isla H; Forbes, Bruce C; Wilmking, Martin; Hallinger, Martin; Lantz, Trevor; Blok, Daan; Sass-Klaassen, Ute; Tape, Ken D; Macias-Fauria, Marc; Lévesque, Esther; Boudreau, Stéphane; Ropars, Pascale; Hermanutz, Luise; Trant, Andrew; Collier, Laura Siegwart; Weijers, Stef; Rozema, Jelte; Rayback, Shelly A; Schmidt, Niels Martin; Schaepman-Strub, Gabriela

    2011-01-01

    Recent research using repeat photography, long-term ecological monitoring and dendrochronology has documented shrub expansion in arctic, high-latitude and alpine tundra ecosystems. Here, we (1) synthesize these findings, (2) present a conceptual framework that identifies mechanisms and constraints on shrub increase, (3) explore causes, feedbacks and implications of the increased shrub cover in tundra ecosystems, and (4) address potential lines of investigation for future research. Satellite observations from around the circumpolar Arctic, showing increased productivity, measured as changes in ‘greenness’, have coincided with a general rise in high-latitude air temperatures and have been partly attributed to increases in shrub cover. Studies indicate that warming temperatures, changes in snow cover, altered disturbance regimes as a result of permafrost thaw, tundra fires, and anthropogenic activities or changes in herbivory intensity are all contributing to observed changes in shrub abundance. A large-scale increase in shrub cover will change the structure of tundra ecosystems and alter energy fluxes, regional climate, soil–atmosphere exchange of water, carbon and nutrients, and ecological interactions between species. In order to project future rates of shrub expansion and understand the feedbacks to ecosystem and climate processes, future research should investigate the species or trait-specific responses of shrubs to climate change including: (1) the temperature sensitivity of shrub growth, (2) factors controlling the recruitment of new individuals, and (3) the relative influence of the positive and negative feedbacks involved in shrub expansion.

  20. Injection moulding of low expansion Fe-Ni-Co alloys

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, R.M. do; Justino, J.G.; Fredel, M.C.; Wendhausen, P.A.P.; Klein, A.N.; Almeida Buschinelli, A.J. de [Dept. of Mechanical Engineering, Univ. Federal de Santa Catarina Florianopolis (Brazil)

    2001-07-01

    Low-expansion alloys (Fe-Ni-Co) are used in specific applications that require accurate dimensional control, such as standards for length measurement, radar resonant cavities, components for nuclear reactors and parts for ceramic-metal joining. This work investigates the production of the Fe-28%Ni-18%Co and Fe-28%Ni-23%Co alloys by powder injection moulding. The mixtures were characterised in the capillar rheometer. The microstructure was characterised with a scanning electron microscope and X-ray diffraction and the coefficient of thermal expansion determined with a linear dilatometer. The mixtures presented a pseudoplastic rheological behaviour and a viscosity level adequate to the injection moulding. The microstructure of the two alloys was constituted of an austenitic phase and the residual porosity (8.5%). Dilatometric behaviour of two alloys is characterised by two distinct regions, demonstrating the presence of the Invar effect and different transition temperature depending on the cobalt content. Coefficients of thermal expansion for both alloys can be considered adequate for brazing with alumina. (orig.)

  1. Hygroscopic Expansion of Aesthetic Restorative Materials: One-Year Report

    Science.gov (United States)

    Emamieh, S.; Ghasemi, A.; Torabzadeh, H.

    2011-01-01

    Objective: To measure the long-term linear hygroscopic expansion (LHE) of several materials using bulked and layered techniques. Materials and Methods: Seven materials were used; Fuji Cap II, Fuji II LC, Photac-Fil Aplicap, Vitremer, Dyract, Tetric and Z100. Ten specimens (6×4 mm) were made for each material using layered and bulked techniques (each group comprises five specimens). The specimens were stored in distilled water at 37°C. The length of each specimen was measured immediately after preparation, 24 hours, one week, one month, three months, six months, nine months and one year. This was used to calculate the percentage change in the length of materials. The mean LHE and standard deviation were calculated. Repeated measure analysis and paired sample t-test were used. Results: The type of material and time had a significant effect on LHE. Fuji Cap II and Fuji II LC exhibited no significant changes after one-year and one month, respectively. However, layered specimens of Photac-Fil Aplicap and Tetric showed constant expansion until six month, whereas bulked specimens reached the constant length at three months. Constant expansion was obtained for layered and bulked specimens of Dyract and Z100 at six month. Layered specimens of Vitremer showed no significant differences except between 24 hours and one year measurements. But in bulked specimens, the results at nine months and one year were significantly different from those obtained at three months and before. Conclusion: Fuji II showed no significant LHE and resin-modified glass ionomer cements (RMGICs) exhibited the highest LHE. Dyract maintained an intermediate LHE in comparison with RMGIC and composite resin. PMID:21998804

  2. Polynomial expansions and transition strengths

    International Nuclear Information System (INIS)

    Draayer, J.P.

    1980-01-01

    The subject is statistical spectroscopy applied to determining strengths and strength sums of excitation processes in nuclei. The focus will be on a ds-shell isoscalar E2 study with detailed shell-model results providing the standard for comparison; similar results are available for isovector E2 and M1 and E4 transitions as well as for single-particle transfer and ν +- decay. The present study is intended to serve as a tutorial for applications where shell-model calculations are not feasible. The problem is posed and a schematic theory for strengths and sums is presented. The theory is extended to include the effect of correlations between H, the system Hamiltonian, and theta, the excitation operator. Associated with correlation measures is a geometry that can be used to anticipate the goodness of a symmetry. This is illustrated for pseudo SU(3) in the fp-shell. Some conclusions about fluctuations and collectivity that one can deduce from the statistical results for strengths are presented

  3. Expansion due to the anaerobic corrosion of iron

    International Nuclear Information System (INIS)

    Smart, N.R.; Rance, A.P.; Fennell, P.A.H.

    2006-12-01

    The proposed design for a final repository for spent fuel and other long-lived residues in Sweden is based on the multi-barrier principle. The waste will be encapsulated in sealed cylindrical canisters, which will then be placed in vertical storage holes drilled in a series of caverns excavated from the granite bedrock at a depth of about 500 m and surrounded by compacted bentonite clay. The canister design is based on a thick cast inner container, designed to provide mechanical strength and to keep individual fuel bundles at a safe distance from one another, thereby minimising the risk of criticality. The container is fitted inside an inherently corrosion resistant copper overpack that is designed to provide containment over the long timescales required. As part of the safety case for the repository, one of the scenarios being addressed by SKB involves the early mechanical failure of the outer copper overpack, allowing water to enter the outer container and corrode the inner one. One consequence of this failure would be the long-term build up of corrosion product, which could induce stresses in the spent fuel canister. A programme of experimental work was undertaken to investigate the effect of corrosion product formation on the generation of stresses in the outer copper container. This report describes the construction of an apparatus to directly measure the expansion caused by the anaerobic corrosion of ferrous material in a simulated repository environment whilst under representative compressive loads. This apparatus, known as the 'stress cell' consisted of a stack of interleaved carbon steel and copper discs that was subjected to a compressive load simulating the loads expected in a repository and immersed in simulated anoxic groundwater at 69 deg C. The stack was mounted in a rigid frame and a system of levers was used to amplify any expansion caused by corrosion; the expansion of the stack was measured using sensitive displacement transducers. Initially

  4. Expansion due to the anaerobic corrosion of iron

    Energy Technology Data Exchange (ETDEWEB)

    Smart, N.R.; Rance, A.P.; Fennell, P.A.H. [Serco Assurance, Culham Science Centre (United Kingdom)

    2006-12-15

    The proposed design for a final repository for spent fuel and other long-lived residues in Sweden is based on the multi-barrier principle. The waste will be encapsulated in sealed cylindrical canisters, which will then be placed in vertical storage holes drilled in a series of caverns excavated from the granite bedrock at a depth of about 500 m and surrounded by compacted bentonite clay. The canister design is based on a thick cast inner container, designed to provide mechanical strength and to keep individual fuel bundles at a safe distance from one another, thereby minimising the risk of criticality. The container is fitted inside an inherently corrosion resistant copper overpack that is designed to provide containment over the long timescales required. As part of the safety case for the repository, one of the scenarios being addressed by SKB involves the early mechanical failure of the outer copper overpack, allowing water to enter the outer container and corrode the inner one. One consequence of this failure would be the long-term build up of corrosion product, which could induce stresses in the spent fuel canister. A programme of experimental work was undertaken to investigate the effect of corrosion product formation on the generation of stresses in the outer copper container. This report describes the construction of an apparatus to directly measure the expansion caused by the anaerobic corrosion of ferrous material in a simulated repository environment whilst under representative compressive loads. This apparatus, known as the 'stress cell' consisted of a stack of interleaved carbon steel and copper discs that was subjected to a compressive load simulating the loads expected in a repository and immersed in simulated anoxic groundwater at 69 deg C. The stack was mounted in a rigid frame and a system of levers was used to amplify any expansion caused by corrosion; the expansion of the stack was measured using sensitive displacement transducers

  5. Impact of size and temperature on thermal expansion of nanomaterials

    Indian Academy of Sciences (India)

    journal of. April 2015 physics pp. 609–619. Impact of size and temperature on thermal expansion of nanomaterials. MADAN SINGH1,∗ and MAHIPAL SINGH2. 1Department of ... thermal expansion of Cu nanomaterial is three times its linear thermal expansion irrespec- ... definition of thermal expansion coefficients as α = 1.

  6. Eikonal expansion in electron scattering. Pt. 1

    International Nuclear Information System (INIS)

    Rosenfelder, R.

    1975-01-01

    A systematic eikonal expansion for the scattering of high-energy electrons from nuclei is derived which starts from the iterated Dirac equation. The resulting scattering amplitude is written in an impact parameter representation depending on eikonal phases which are proportional to inverse powers of the energy. The first two correction terms to the leading Glauber-Baker amplitude are calculated. For a Coulomb potential they agree with a sin theta/2-expansion of the relativistic Coulomb scattering amplitude. In the case of scattering from an extended charge distribution at sufficiently high energies numerical partial wave calculations are accurately reproduced. (orig.) [de

  7. Large J expansion in ABJM theory revisited.

    Science.gov (United States)

    Dimov, H; Mladenov, S; Rashkov, R C

    Recently there has been progress in the computation of the anomalous dimensions of gauge theory operators at strong coupling by making use of the AdS/CFT correspondence. On the string theory side they are given by dispersion relations in the semiclassical regime. We revisit the problem of a large-charge expansion of the dispersion relations for simple semiclassical strings in an [Formula: see text] background. We present the calculation of the corresponding anomalous dimensions of the gauge theory operators to an arbitrary order using three different methods. Although the results of the three methods look different, power series expansions show their consistency.

  8. Expansion of the whole wheat flour extrusion

    DEFF Research Database (Denmark)

    Cheng, Hongyuan; Friis, Alan

    2008-01-01

    A new model framework is proposed to describe the expansion of extrudates with extruder operating conditions based on dimensional analysis principle. The Buckingham pi dimensional analysis method is applied to form the basic structure of the model from extrusion process operational parameters. Us....... Using the Central Composite Design (CCD) method, whole wheat flour was processed in a twin-screw extruder with 16 trials. The proposed model can well correlate the expansion of the 16 trials using 3 regression parameters. The average deviation of the correlation is 5.9%....

  9. Extrudate Expansion Modelling through Dimensional Analysis Method

    DEFF Research Database (Denmark)

    to describe the extrudates expansion. From the three dimensionless groups, an equation with three experimentally determined parameters is derived to express the extrudate expansion. The model is evaluated with whole wheat flour and aquatic feed extrusion experimental data. The average deviations...... of the correlation are respectively 5.9% and 9% for the whole wheat flour and the aquatic feed extrusion. An alternative 4-coefficient equation is also suggested from the 3 dimensionless groups. The average deviations of the alternative equation are respectively 5.8% and 2.5% in correlation with the same set...

  10. Scenarios of Expansion to Electric Generation Capacity

    Directory of Open Access Journals (Sweden)

    José Somoza-Cabrera

    2017-06-01

    Full Text Available We show the building scenarios of expansion to electric generation capacity enough to supply the demand to 2050. We were using the LEAP facility (Long-range Energy Alternatives Planning System, to simulate dispatch of electricity at minimum cost. Finally, we show the cost-benefice analysis of the technologies availability, included externality and CO2 emission limited. However that we included the externals cost in this analysis, it results insufficient to closed gap between fossil and renewable technologies of electric generation. Nevertheless, in some opportunities the renewable options had very important participations in the minimal cost scenario of expansion.

  11. Thermal expansion of superconducting fulleride and borocarbide compounds

    International Nuclear Information System (INIS)

    Burkhart, G.J.

    1995-08-01

    In order to detact and analyze thermodynamic phase transitions, the investigation of the thermal expansion via capacitance dilatometry is a powerful experimental technique, due to the extremely high resolution (ΔL/L∝10 -8 -10 -10 ). With respect to the air sensitivity of the fullerides a dilatometer operating under inert atmosphere was designed and the thermal expansion of polycrystalline fulleride (Rb 3 C 60 , K 3 C 60 ) and borocarbide (YNi 2 B 2 C, LuNi 2 B 2 C) compounds was determined in the temperature range 5-320 K. Most effort was focused on a quantitative evaluation of the discontinuity in the thermal expansivity α at the superconducting transition. The results are discussed in the context of the Ehrenfest relation, which connects the jump in the thermal expansivity Δα with the pressure dependence of the superconducting transition temperature dT c /dp and the jump in the specific heat Δc p /T c at the superconducting transition. For Rb 3 C 60 and K 3 C 60 the jump in the specific heat can be derived via the Ehrenfest relation using the results of the thermal expansion measurements and the well-known pressure dependence of the superconducting transition temperature. The derived values for Rb 3 C 60 and K 3 Cu 60 are Δc p /T c ∝75mJ/molK 2 and Δc p /T c ∝64 mJ.molK 2 , respectively. The directly measured specific heat jump of K 3 C 60 gives approximately the same value of Δc p /T c , and, therefore, the use of the Ehrenfest relation on fullerides is justified. The specific heat jumps Δc p /T c , determined from theoretically derived values of the density of states at the Fermi level N(E F ) and the McMillan-parameter λ, exceed the experimental results by a factor of 1.5-2. This finding reflects the uncertainty concerning the superconducting parameters N(E F ) and λ. (orig.)

  12. Cluster expansions for the correlated basis functions theory

    Energy Technology Data Exchange (ETDEWEB)

    Guardiola, R. (Granada Univ. (Spain). Dept. de Fisica Nuclear)

    1982-08-16

    Four kinds of cluster expansions for the calculation of non-diagonal matrix elements of the hamiltonian between correlated states have been derived. The derivation is based on a linearization mechanism for the standard cluster expansions in a configuration mixed state. Particulary simple formulae result for the multiplicative Factor-Aviles-Hartog-Tolhoek expansion and for the exponential form of the Gaudin-Gillespie-Ripka cluster expansion. The resulting expansions are directly usable in finite nuclei.

  13. Eta-Expansion Does The Trick

    DEFF Research Database (Denmark)

    Danvy, Olivier; Malmkjær, Karoline; Palsberg, Jens

    1996-01-01

    -sum type. For the latter case, it enables “The Trick.” In this article, we extend Gomard and Jones' partial evaluator for the &lgr;-calculus, &lgr;-Mix, with products and disjoint sums; we point out how eta-expansion for (finite) disjoint sums enable The Trick; we generalize our earlier work by identifying...

  14. Eta-Expansion Does The Trick

    DEFF Research Database (Denmark)

    Danvy, Olivier; Malmkjær, Karoline; Palsberg, Jens

    1995-01-01

    -sum type. For the latter case, it enables “The Trick.” In this article, we extend Gomard and Jones' partial evaluator for the &lgr;-calculus, &lgr;-Mix, with products and disjoint sums; we point out how eta-expansion for (finite) disjoint sums enable The Trick; we generalize our earlier work by identifying...

  15. Territorial expansion and primary state formation

    Science.gov (United States)

    Spencer, Charles S.

    2010-01-01

    A major research problem in anthropology is the origin of the state and its bureaucratic form of governance. Of particular importance for evaluating theories of state origins are cases of primary state formation, whereby a first-generation state evolves without contact with any preexisting states. A general model of this process, the territorial-expansion model, is presented and assessed with archaeological data from six areas where primary states emerged in antiquity: Mesoamerica, Peru, Egypt, Mesopotamia, the Indus Valley, and China. In each case, the evidence shows a close correspondence in time between the first appearance of state institutions and the earliest expansion of the state's political-economic control to regions lying more than a day's round-trip from the capital. Although additional research will add detail and clarity to the empirical record, the results to date are consistent with the territorial-expansion model, which argues that the success of such long-distance expansion not only demanded the bureaucratization of central authority but also helped provide the resources necessary to underwrite this administrative transformation. PMID:20385804

  16. Critical point anomalies include expansion shock waves

    NARCIS (Netherlands)

    Nannen, N.R.; Guardone, A.; Colonna, P.

    2014-01-01

    From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the

  17. Cropland expansion in Brazil, 2000 to 2014

    Science.gov (United States)

    Zalles, V.; Hansen, M.; Potapov, P.; Stehman, S. V.; Tyukavina, A.; Pickens, A. H.; Okpa, C.; Aguilar, R.; John, N.; Chavez, S.

    2017-12-01

    Brazil has become a global leader in the production of commodity row crops such as soybean, sugarcane, cotton, and corn. Here, we employ 30m spatial resolution Landsat data to estimate cropland extent in the year 2000 and its subsequent expansion through 2014. A probability-based sample of reference data allows us to report unbiased estimates of national, biome, and state-scale area of crop expansion with associated uncertainties. We find an increase in Brazilian cropland extent from 26.0 Mha in 2000 to 46.1 Mha in 2014. The cropland frontier states of Maranhao, Tocantins, Piaui, Bahia (MATOPIBA), Mato Grosso, Mato Grosso do Sul, and Para all more than doubled in cropland extent. The states of Goias, Minas Gerais and Sao Paulo experienced >50% increases. The vast majority of expansion, 79%, occurred on repurposed pasture lands, and 20% from the conversion of natural vegetation. Area of converted Cerrado savannas was nearly 2.5 times that of Amazon forests, and accounted for over half of new cropland in MATOPIBA. Spatio-temporal dynamics of cropland expansion are reflected in market conditions, land use policies, and other factors. Continued extensification of cropland is a viable option across Brazil with attendant benefits for and challenges to development.

  18. Platform Expansion Design as Strategic Choice

    DEFF Research Database (Denmark)

    Staykova, Kalina S.; Damsgaard, Jan

    2016-01-01

    the main characteristics of the two approaches and to identify the potential trade-offs associated with the selection of particular expansion mode. To this end, we construct the Platform Strategy Framework and apply it to two exemplary cases – WeChat, which functions as a feature bundling platform...

  19. Analytic continuation and perturbative expansions in QCD

    Czech Academy of Sciences Publication Activity Database

    Caprini, I.; Fischer, Jan

    2002-01-01

    Roč. 24, - (2002), s. 127-135 ISSN 1434-6044 R&D Projects: GA MPO RP-4210/69 Institutional research plan: CEZ:AV0Z1010920 Keywords : perturbative expansion * quantum chromodynamics * infrared ambiguity * essential singularities Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 6.162, year: 2002

  20. Global Expansion and English Language Learning

    Science.gov (United States)

    Andrade, Maureen Snow

    2016-01-01

    Demand for higher education is global. As institutions extend opportunities beyond their borders, English language proficiency must be considered. This chapter focuses on considerations related to global expansion, with an emphasis on the role of distance English language courses and the distinct considerations in their development.

  1. Bond return predictability in expansions and recessions

    DEFF Research Database (Denmark)

    Engsted, Tom; Møller, Stig Vinther; Jensen, Magnus David Sander

    We document that over the period 1953-2011 US bond returns are predictable in expansionary periods but unpredictable during recessions. This result holds in both in-sample and out-of-sample analyses and using both univariate regressions and combination forecasting techniques. A simulation study s...... but not in expansions. Thus, our results indicate that there is not a common predictive pattern of stock and bond returns associated with the state of the economy....... shows that our tests have power to reject unpredictability in both expansions and recessions. To judge the economic significance of the results we compute utility gains for a meanvariance investor who takes the predictability patterns into account and show that utility gains are positive in expansions...... but negative in recessions. The results are also consistent with tests showing that the expectations hypothesis of the term structure holds in recessions but not in expansions. However, the results for bonds are in sharp contrast to results for stocks showing that stock returns are predictable in recessions...

  2. A Pedagogical Approach to the Magnus Expansion

    Science.gov (United States)

    Blanes, S.; Casas, F.; Oteo, J. A.; Ros, J.

    2010-01-01

    Time-dependent perturbation theory as a tool to compute approximate solutions of the Schrodinger equation does not preserve unitarity. Here we present, in a simple way, how the "Magnus expansion" (also known as "exponential perturbation theory") provides such unitary approximate solutions. The purpose is to illustrate the importance and…

  3. Optimal Lyapunov metrics of expansive homeomorphisms

    International Nuclear Information System (INIS)

    Dovbysh, S A

    2006-01-01

    We sharpen the following results of Reddy, Sakai and Fried: any expansive homeomorphism of a metrizable compactum admits a Lyapunov metric compatible with the topology, and if we also assume the existence of a local product structure (that is, if the homeomorphism is an A*-homeomorphism in the terminology of Alekseev and Yakobson, or possesses hyperbolic canonical coordinates in the terminology of Bowen, or together with the metric compactum constitutes a Smale space in the terminology by Ruelle), then we also obtain the validity of Ruelle's technical axiom on the Lipschitz property of the homeomorphism, its inverse, and the local product structure. It is shown that any expansive homeomorphism admits a Lyapunov metric such that the homeomorphism on local stable (resp. unstable) 'manifolds' is approximately representable on a small scale as a contraction (resp. expansion) with constant coefficient λ s (resp. λ u -1 ) in this metric. For A*-homeomorphisms, we prove that the desired metric can be approximately represented on a small scale as the direct sum of metrics corresponding to the canonical coordinates determined by the local product structure and that local 'manifolds' are 'flat' in some sense. It is also proved that the lower bounds for the contraction constants λ s and expansion constants λ u of A*-homeomorphisms are attained simultaneously for some metric that satisfies all the conditions described

  4. Handling Wavelet Expansions in numerical Methods

    NARCIS (Netherlands)

    Metselaar, Arend Aalberthus Roeland

    2002-01-01

    Wavelet expansions have drawn a lot of attention in recent decades. Wavelets originate from signal analysis, and one of the purposes is data compression. The ability to compress data can also be used to reduce the amount of computation work in a numerical simulation.A family of wavelets forms a

  5. Revisting expansive learning for knowledge production and ...

    African Journals Online (AJOL)

    Revisting expansive learning for knowledge production and capability development at postgraduate level in Higher Education Studies. R Niemann. Abstract. Higher education in South Africa is challenged by academic and social demands. Universities, therefore, have to produce graduates who will be able to function ...

  6. Expansion of Private Engineering Institutions: Challenges Ahead

    Science.gov (United States)

    Singh, Antra; Singh, Seema

    2018-01-01

    Globalization process and growth of knowledge economy with increasing dependency on innovative information technology necessitated an expansion of higher education institution. With the country counting on its demographic dividend, the increase in number of students seeking university degree is putting pressure on the higher education sector to…

  7. Thermal expansion absorbing structure for pipeline

    International Nuclear Information System (INIS)

    Nagata, Takashi; Yamashita, Takuya.

    1995-01-01

    A thermal expansion absorbing structure for a pipeline is disposed to the end of pipelines to form a U-shaped cross section connecting a semi-circular torus shell and a short double-walled cylindrical tube. The U-shaped longitudinal cross-section is deformed in accordance with the shrinking deformation of the pipeline and absorbs thermal expansion. Namely, since the central lines of the outer and inner tubes of the double-walled cylindrical tube deform so as to incline, when the pipeline is deformed by thermal expansion, thermal expansion can be absorbed by a simple configuration thereby enabling to contribute to ensure the safety. Then, the entire length of the pipeline can greatly be shortened by applying it to the pipeline disposed in a high temperature state compared with a method of laying around a pipeline using only elbows, which has been conducted so far. Especially, when it is applied to a pipeline for an FBR-type reactor, the cost for the construction of a facility of a primary systems can greater be reduced. In addition, it can be applied to a pipeline for usual chemical plants and any other structures requiring absorption of deformation. (N.H.)

  8. Negative thermal expansion in framework compounds

    Indian Academy of Sciences (India)

    electron microscopy, EXAFS and differential scanning calorimetry have been used to study structural properties as a function of temperature for these compounds. In this paper we report the results obtained from our study [14–20] of negative thermal expansion (NTE) compounds with chemical compositions of NX2O8 and.

  9. Regulatory Holidays and Optimal Network Expansion

    NARCIS (Netherlands)

    Willems, Bert; Zwart, Gijsbert

    2016-01-01

    We model the optimal regulation of continuous, irreversible, capacity expansion, in a model in which the regulated network firm has private information about its capacity costs, investments need to be financed out of the firm’s cash flows from selling network access and demand is stochastic. If

  10. Expansion of the whole wheat flour extrusion

    DEFF Research Database (Denmark)

    Cheng, Hongyuan; Friis, Alan

    2008-01-01

    A new model framework is proposed to describe the expansion of extrudates with extruder operating conditions based on dimensional analysis principle. The Buckingham pi dimensional analysis method is applied to form the basic structure of the model from extrusion process operational parameters...

  11. Analytical modeling of nonradial expansion plumes

    Science.gov (United States)

    Boyd, Iain D.

    1990-01-01

    The 'Modified Simons' model presented allows the nonradial nature of axisymmetric rocket and thruster plume flowfields having a large exit Mach number and/or a large nozzle exit half-angle to be successfully predicted. The model is applied to monatomic and polyatomic gas (N, Ar, tetrafluoromethane) expansions; the nonradial density decay observed experimentally is successfully predicted.

  12. Territorial expansion and primary state formation.

    Science.gov (United States)

    Spencer, Charles S

    2010-04-20

    A major research problem in anthropology is the origin of the state and its bureaucratic form of governance. Of particular importance for evaluating theories of state origins are cases of primary state formation, whereby a first-generation state evolves without contact with any preexisting states. A general model of this process, the territorial-expansion model, is presented and assessed with archaeological data from six areas where primary states emerged in antiquity: Mesoamerica, Peru, Egypt, Mesopotamia, the Indus Valley, and China. In each case, the evidence shows a close correspondence in time between the first appearance of state institutions and the earliest expansion of the state's political-economic control to regions lying more than a day's round-trip from the capital. Although additional research will add detail and clarity to the empirical record, the results to date are consistent with the territorial-expansion model, which argues that the success of such long-distance expansion not only demanded the bureaucratization of central authority but also helped provide the resources necessary to underwrite this administrative transformation.

  13. Thermal Expansion Anomaly Regulated by Entropy

    Science.gov (United States)

    Liu, Zi-Kui; Wang, Yi; Shang, Shunli

    2014-11-01

    Thermal expansion, defined as the temperature dependence of volume under constant pressure, is a common phenomenon in nature and originates from anharmonic lattice dynamics. However, it has been poorly understood how thermal expansion can show anomalies such as colossal positive, zero, or negative thermal expansion (CPTE, ZTE, or NTE), especially in quantitative terms. Here we show that changes in configurational entropy due to metastable micro(scopic)states can lead to quantitative prediction of these anomalies. We integrate the Maxwell relation, statistic mechanics, and first-principles calculations to demonstrate that when the entropy is increased by pressure, NTE occurs such as in Invar alloy (Fe3Pt, for example), silicon, ice, and water, and when the entropy is decreased dramatically by pressure, CPTE is expected such as in anti-Invar cerium, ice and water. Our findings provide a theoretic framework to understand and predict a broad range of anomalies in nature in addition to thermal expansion, which may include gigantic electrocaloric and electromechanical responses, anomalously reduced thermal conductivity, and spin distributions.

  14. Stakeholder Support for School Food Policy Expansions

    Science.gov (United States)

    Pettigrew, Simone; Pescud, Melanie; Donovan, Robert J.

    2012-01-01

    The aim of this study was to assess the extent to which parents and school-based stakeholders (principals, teachers, canteen managers and Parents & Citizen Committee presidents) are supportive of potential expansions to a new school food policy. Eight additional policy components elicited in preliminary focus groups with parents and 19 additional…

  15. Peruvian Higher Education: Expansions Amid Economic Crisis.

    Science.gov (United States)

    Post, David

    1991-01-01

    Development of the Peruvian university system is described, focusing on periods of rapid expansion. Enrollment declines in 1974-78 are analyzed in the context of the educational reform program of the military government. The 1983 new university law, following return to civilian government, and future prospects for higher education are discussed.…

  16. Study of the multifragmentation in central collisions of the system: {sup 129}Xe + {sup nat}Sn between 32 and 50 MeV/A: measurement of collective expansion energy and of freeze-out volume; Etude de la multifragmentation dans les collisions centrales pour le systeme {sup 129}Xe + {sup nat}Sn entre 32 et 50 MeV/A: mesure de l`energie collective d`expansion et du volume de freeze-out

    Energy Technology Data Exchange (ETDEWEB)

    Salou, S

    1997-12-05

    The multifragmentation of the nuclear system formed in the central collisions of the Xe+Sn reaction between 32 and 50 MeV/A has been studied with the INDRA detector. A tensorial analyse is used to select central collisions. An important part of the charge (about 85 %) is isotropically emitted. The charge partitions have the characteristics of a simultaneous multiple fragment emission. The shape of the fragment kinetic energy distributions together with the reduced velocity correlation functions indicate that the fragmentation is a simultaneous process that occurs at low density. A comparison between the experimental data and predictions of the statistical multifragmentation model of Copenhagen (SMM) shows that charge partitions agree with the hypothesis of a thermodynamical equilibrium, whereas, kinetic observables are more constraining to the model and difficult to reproduce. However, fragments correlation functions are used in order to extract the freeze-out volume and the collective radial energy. At 50 MeV/A, the freeze-out volume is estimated to be 2.7 times the normal volume. It decreases with incident energy to be nearly twice the normal volume at 32 MeV/S. The collective energy evolves from 0 to 1.3 MeV/A with the bombarding energy. This expansion is not purely thermal and originates probably from a dynamical compression developed in the early stage of the collision. (author) 88 refs.

  17. Derivation of quantum Chernoff metric with perturbation expansion method

    Science.gov (United States)

    Zhong, Wei; Ma, Jian; Liu, Jing; Wang, Xiao-Guang

    2014-09-01

    We investigate a measure of distinguishability defined by the quantum Chernoff bound, which naturally induces the quantum Chernoff metric over a manifold of quantum states. Based on a quantum statistical model, we alternatively derive this metric by means of perturbation expansion. Moreover, we show that the quantum Chernoff metric coincides with the infinitesimal form of the quantum Hellinger distance, and reduces to the variant version of the quantum Fisher information for the single-parameter case. We also give the exact form of the quantum Chernoff metric for a qubit system containing a single parameter.

  18. Model-independent cosmological constraints from growth and expansion

    Science.gov (United States)

    L'Huillier, Benjamin; Shafieloo, Arman; Kim, Hyungjin

    2018-02-01

    Reconstructing the expansion history of the Universe from type Ia supernovae data, we fit the growth rate measurements and put model-independent constraints on some key cosmological parameters, namely, Ωm, γ, and σ8. The constraints are consistent with those from the concordance model within the framework of general relativity, but the current quality of the data is not sufficient to rule out modified gravity models. Adding the condition that dark energy density should be positive at all redshifts, independently of its equation of state, further constrains the parameters and interestingly supports the concordance model.

  19. Reconstruction of Attosecond Pulse Trains Using an Adiabatic Phase Expansion

    International Nuclear Information System (INIS)

    Varju, K.; Gustafsson, E.; Johnsson, P.; Mauritsson, J.; L'Huillier, A.; Mairesse, Y.; Agostini, P.; Breger, P.; Carre, B.; Merdji, H.; Monchicourt, P.; Salieres, P.; Frasinski, L.J.

    2005-01-01

    We propose a new method to reconstruct the electric field of attosecond pulse trains. The phase of the high-order harmonic emission electric field is Taylor expanded around the maximum of the laser pulse envelope in the time domain and around the central harmonic in the frequency domain. Experimental measurements allow us to determine the coefficients of this expansion and to characterize the radiation with attosecond accuracy over a femtosecond time scale. The method gives access to pulse-to-pulse variations along the train, including the timing, the chirp, and the attosecond carrier envelope phase

  20. Thermal Expansion and Thermal Conductivity of Rare Earth Silicates

    Science.gov (United States)

    Zhu, Dongming; Lee, Kang N.; Bansal, Narottam P.

    2006-01-01

    Rare earth silicates are considered promising candidate materials for environmental barrier coatings applications at elevated temperature for ceramic matrix composites. High temperature thermophysical properties are of great importance for coating system design and development. In this study, the thermal expansion and thermal conductivity of hot-pressed rare earth silicate materials were characterized at temperatures up to 1400 C. The effects of specimen porosity, composition and microstructure on the properties were also investigated. The materials processing and testing issues affecting the measurements will also be discussed.

  1. Thermal expansion studies on dysprosium and gadolinium titanates

    International Nuclear Information System (INIS)

    Panneerselvam, G.; Antony, M.P.; Vasudeva Rao, P.R.

    2002-01-01

    Lanthanides and their oxides are considered potential candidates for the use in nuclear reactors as control rod. Dysprosium (Dy) and gadolinium (Gd) have very high absorption cross-section for neutrons. Dysprosium and gadolinium titanates were prepared by ceramic route as well as wet chemical route. The compounds were characterized chemically by using inductively coupled plasma mass spectrometric (ICPMS) technique and by x-ray diffraction (XRD) technique. Thermal expansion coefficient was measured in the temperature range 573 to 1573 K by using high temperature x-ray diffraction technique. (author)

  2. Controllable rectification of the axial expansion in the thermally driven artificial muscle

    Science.gov (United States)

    Yue, Donghua; Zhang, Xingyi; Yong, Huadong; Zhou, Jun; Zhou, You-He

    2015-09-01

    At present, the concept of artificial muscle twisted by polymers or fibers has become a hot issue in the field of intelligent material research according to its distinguishing advantages, e.g., high energy density, large-stroke, non-hysteresis, and inexpensive. The axial thermal expansion coefficient is an important parameter which can affect its demanding applications. In this letter, a device with high accuracy capacitive sensor is constructed to measure the axial thermal expansion coefficient of the twisted carbon fibers and yarns of Kevlar, and a theoretical model based on the thermal elasticity and the geometrical features of the twisted structure are also presented to predict the axial expansion coefficient. It is found that the calculated results take good agreements with the experimental data. According to the present experiment and analyses, a method to control the axial thermal expansion coefficient of artificial muscle is proposed. Moreover, the mechanism of this kind of thermally driven artificial muscle is discussed.

  3. Series expansions of the density of states in SU(2) lattice gauge theory

    International Nuclear Information System (INIS)

    Denbleyker, A.; Du, Daping; Liu, Yuzhi; Meurice, Y.; Velytsky, A.

    2008-01-01

    We calculate numerically the density of states n(S) for SU(2) lattice gauge theory on L 4 lattices [S is the Wilson's action and n(S) measures the relative number of ways S can be obtained]. Small volume dependences are resolved for small values of S. We compare ln(n(S)) with weak and strong coupling expansions. Intermediate order expansions show a good overlap for values of S corresponding to the crossover. We relate the convergence of these expansions to those of the average plaquette. We show that, when known logarithmic singularities are subtracted from ln(n(S)), expansions in Legendre polynomials appear to converge and could be suitable to determine the Fisher's zeros of the partition function.

  4. Giant negative linear compression positively coupled to massive thermal expansion in a metal-organic framework.

    Science.gov (United States)

    Cai, Weizhao; Katrusiak, Andrzej

    2014-07-04

    Materials with negative linear compressibility are sought for various technological applications. Such effects were reported mainly in framework materials. When heated, they typically contract in the same direction of negative linear compression. Here we show that this common inverse relationship rule does not apply to a three-dimensional metal-organic framework crystal, [Ag(ethylenediamine)]NO3. In this material, the direction of the largest intrinsic negative linear compression yet observed in metal-organic frameworks coincides with the strongest positive thermal expansion. In the perpendicular direction, the large linear negative thermal expansion and the strongest crystal compressibility are collinear. This seemingly irrational positive relationship of temperature and pressure effects is explained and the mechanism of coupling of compressibility with expansivity is presented. The positive coupling between compression and thermal expansion in this material enhances its piezo-mechanical response in adiabatic process, which may be used for designing new artificial composites and ultrasensitive measuring devices.

  5. Thermal Expansion of Ni3Al Intermetallic Compound: Experiment and Simulation

    International Nuclear Information System (INIS)

    Wang Hai-Peng; Lü Peng; Zhou Kai; Wei Bing-Bo

    2016-01-01

    The thermal expansion of Ni 3 Al intermetallic compound is determined by a thermal dilatometer and simulated by the molecular dynamics method. The results of the linear thermal expansion coefficients are presented from 200 K up to the maximum temperature of 1600 K. The single phase of Ni 3 Al intermetallic compound is confirmed by x-ray diffraction together with DSC melting and solidification peaks, from which the solidus and the liquidus temperatures are obtained to be 1660 and 1695 K, respectively. The measured linear thermal expansion coefficient increases from 1.5 × 10 −5 to 2.7 × 10 −5 K −1 in the experimental temperature range, in good agreement with the data obtained by the molecular dynamics simulation, just a slight difference from the temperature dependence coefficient. Furthermore, the atomic structure and position are presented to reveal the atom distribution change during thermal expansion of Ni 3 Al compound. (paper)

  6. Numerical simulation of stratified shear flow using a higher order Taylor series expansion method

    Energy Technology Data Exchange (ETDEWEB)

    Iwashige, Kengo; Ikeda, Takashi [Hitachi, Ltd. (Japan)

    1995-09-01

    A higher order Taylor series expansion method is applied to two-dimensional numerical simulation of stratified shear flow. In the present study, central difference scheme-like method is adopted for an even expansion order, and upwind difference scheme-like method is adopted for an odd order, and the expansion order is variable. To evaluate the effects of expansion order upon the numerical results, a stratified shear flow test in a rectangular channel (Reynolds number = 1.7x10{sup 4}) is carried out, and the numerical velocity and temperature fields are compared with experimental results measured by laser Doppler velocimetry thermocouples. The results confirm that the higher and odd order methods can simulate mean velocity distributions, root-mean-square velocity fluctuations, Reynolds stress, temperature distributions, and root-mean-square temperature fluctuations.

  7. [Evaluation of cone-beam computed tomography on upper airway changes after alternating rapid palatal expansion and constriction].

    Science.gov (United States)

    Chang, D T; Zhou, Y H; Liu, W T

    2017-08-18

    To evaluate the changes of different parts of upper airway after alternating rapid palatal expansion and constriction via three dimensional measurement, compared with the protocol of rapid palatal expansion alone. In the study, 36 patients with retrognathic maxilla were selected and randomized to either group A or group B. The patients in group A were treated with rapid palatal expansion alone. The patients in group B were treated with alternating rapid palatal expansion and constriction. Three dimensional analyses were performed on all pre- and post-treatment cone-beam computed tomography (CBCT) images with the software Dolphin. Two subjects in group B were lost to follow up during the treatment. The gender distributions, ages and all measuring items before treatment had no significant difference between group A and group B (P>0.05). Nasal floor width, nasal lateral width, nasal volume, and nasopharynx volume increased significantly in each group after rapid palatal expansion alone or rapid palatal expansion and constriction (P0.05). No significant difference was observed in the nasal floor width and nasal lateral width increment among the anterior, median and posterior parts in each group either (P>0.05). No significant difference in all the measuring items was observed between the two groups (P>0.05). Alternating rapid palatal expansion and constriction could increase the volume of nasal and naopharynx cavities by the similar way of rapid palatal expansion alone, and had no obvious effect on oropharynx and hypopharynx cavities.

  8. Novel expansion techniques for skin grafts

    Science.gov (United States)

    Kadam, Dinesh

    2016-01-01

    The quest for skin expansion is not restricted to cover a large area alone, but to produce acceptable uniform surfaces, robust engraftment to withstand mechanical shear and infection, with a minimal donor morbidity. Ease of the technique, shorter healing period and reproducible results are essential parameters to adopt novel techniques. Significant advances seen in four fronts of autologous grafting are: (1) Dermal–epidermal graft expansion techniques, (2) epidermal graft harvests technique, (3) melanocyte-rich basal cell therapy for vitiligo and (4) robust and faster autologous cell cultures. Meek's original concept that the sum of perimeter of smaller grafts is larger than the harvested graft, and smaller the graft size, the greater is the potential for regeneration is witnessed in newer modification. Further, as graft size becomes smaller or minced, these micrografts can survive on the wound bed exudate irrespective of their dermal orientation. Expansion produced by 4 mm × 4 mm sized Meek micrografts is 10-folds, similarly 0.8 mm × 0.8 mm size micrografts produce 100-fold expansion, which becomes 700-fold with pixel grafts of 0.3 mm × 0.3 mm size. Fractional skin harvest is another new technique with 700 μ size full thickness graft. These provide instant autologous non-cultured graft to cover extensive areas with similar quality of engraftment surface as split skin grafts. Newer tools for epidermal blister graft harvest quickly, with uniform size to produce 7-fold expansions with reproducible results. In addition, donor area heals faster with minimal scar. Melanocyte-rich cell suspension is utilised in vitiligo surgery tapping the potential of hair root melanocytes. Further advances in the cell culture to reduce the cultivation time and provide stronger epidermal sheets with dermal carrier are seen in trials. PMID:27274117

  9. 216-B-3 expansion ponds closure plan

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-01

    This document describes the activities for clean closure under the Resource Conservation and Recovery Act of 1976 (RCRA) of the 216-B-3 Expansion Ponds. The 216-B-3 Expansion Ponds are operated by the US Department of Energy, Richland Operations Office (DOE-RL) and co-operated by Westinghouse Hanford Company (Westinghouse Hanford). The 216-B-3 Expansion Ponds consists of a series of three earthen, unlined, interconnected ponds that receive waste water from various 200 East Area operating facilities. The 3A, 3B, and 3C ponds are referred to as Expansion Ponds because they expanded the capability of the B Pond System. Waste water (primarily cooling water, steam condensate, and sanitary water) from various 200 East Area facilities is discharged to the Bypass pipe (Project X-009). Water discharged to the Bypass pipe flows directly into the 216-B-3C Pond. The ponds were operated in a cascade mode, where the Main Pond overflowed into the 3A Pond and the 3A Pond overflowed into the 3C Pond. The 3B Pond has not received waste water since May 1985; however, when in operation, the 3B Pond received overflow from the 3A Pond. In the past, waste water discharges to the Expansion Ponds had the potential to have contained mixed waste (radioactive waste and dangerous waste). The radioactive portion of mixed waste has been interpreted by the US Department of Energy (DOE) to be regulated under the Atomic Energy Act of 1954; the dangerous waste portion of mixed waste is regulated under RCRA.

  10. Thermal expansion and magnetostriction studies on iron pnictides

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Liran

    2010-09-19

    In this work, a 3-terminal capacitance dilatometer was set up and used for measurements of the thermal expansion and magnetostriction of novel superconducting iron pinictides and related materials. In particular, RFeAsO with R = La, Ce, Pr, Sm, Gd, LaFeASO{sub 1-x}F{sub x} and Ca(F{sub 1-c}Co{sub x}){sub 2}As{sub 2} have been investigated. The data on polycrystalline LaFeAsO{sub 1-x} are the first published thermal expansion data on this material. The lattice effects at the structural and the magnetic phase transition have been investigated and the phase diagram upon F-doping has been studied. A main result is the observation of a previously unknown fluctuation regime for the doping level x ≤ 0.04 over a large T range above the structural transition temperature T{sub S}. The absence of any structural anomalies in the normal state of the superconducting LaFeAlO{sub 1-x}F{sub x} samples with x ≥ 0.05 corroborates the discontinuous character of the phase boundary not only for the magnetism but also for the structural degrees of freedom. Similarly, the presence of high-temperature fluctuations is found for all RFeAsO undoped materials under study. The discussion of the probable origin of the fluctuations as well as the definition of the structural transition temperature T{sub S} are done. The low temperature features shown by the thermal expansion data for RFeAsO are caused by the onset of long range magnetic order of the 4f-moments and their different configurations. In particular, PrFeAsO, which has a very pronounced anomaly associated with Pr-ordering exhibits a large magnetostriction at low temperatures. By discussing this effect along with the magnetization, resistivity and other measurements, it is found that this large magneto-elastic effect may originate from the correlations between the momentum from Fe{sup 3+} and Pr{sup 3+}. Last, the thermal expansion of Ca(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2} 122 single crystals is investigated. Ca(Fe{sub 1-x}Co{sub x

  11. Brillouin Corrosion Expansion Sensors for Steel Reinforced Concrete Structures Using a Fiber Optic Coil Winding Method

    Directory of Open Access Journals (Sweden)

    Xingjun Lv

    2011-11-01

    Full Text Available In this paper, a novel kind of method to monitor corrosion expansion of steel rebars in steel reinforced concrete structures named fiber optic coil winding method is proposed, discussed and tested. It is based on the fiber optical Brillouin sensing technique. Firstly, a strain calibration experiment is designed and conducted to obtain the strain coefficient of single mode fiber optics. Results have shown that there is a good linear relationship between Brillouin frequency and applied strain. Then, three kinds of novel fiber optical Brillouin corrosion expansion sensors with different fiber optic coil winding packaging schemes are designed. Sensors were embedded into concrete specimens to monitor expansion strain caused by steel rebar corrosion, and their performance was studied in a designed electrochemical corrosion acceleration experiment. Experimental results have shown that expansion strain along the fiber optic coil winding area can be detected and measured by the three kinds of sensors with different measurement range during development the corrosion. With the assumption of uniform corrosion, diameters of corrosion steel rebars were obtained using calculated average strains. A maximum expansion strain of 6,738 με was monitored. Furthermore, the uniform corrosion analysis model was established and the evaluation formula to evaluate mass loss rate of steel rebar under a given corrosion rust expansion rate was derived. The research has shown that three kinds of Brillouin sensors can be used to monitor the steel rebar corrosion expansion of reinforced concrete structures with good sensitivity, accuracy and monitoring range, and can be applied to monitor different levels of corrosion. By means of this kind of monitoring technique, quantitative corrosion expansion monitoring can be carried out, with the virtues of long durability, real-time monitoring and quasi-distribution monitoring.

  12. Velocity slip of gas mixtures in free jet expansions

    International Nuclear Information System (INIS)

    Cattolica, R.J.; Talbot, L.; Coe, D.

    1976-11-01

    Velocity slip in gas mixtures of argon and helium in axisymmetric free jet expansions has been measured using a grating monochromator together with a computer-controlled Fabry-Perot interferometer to observe the fluorescence excited by an electron beam. The Doppler shift between the fluorescence observed parallel and perpendicular to the centerline of the free jet was used to measure the mean velocity of a particular species along the jet centerline, employing the 4880 A line for argon and the 5016 A line for helium. By alternately tracking the parallel and perpendicular fluorescence, the Doppler shift due to the mean velocity was measured directly with an accuracy of 1 percent. Flow field surveys have been made in the initial acceleration region where the flow becomes hypersonic and in the far field region. The differences between argon and helium mean velocities (velocity slip) are in good agreement with molecular beam data and show a correlation with an inverse Knudsen number

  13. Defining chemical expansion: the choice of units for the stoichiometric expansion coefficient

    DEFF Research Database (Denmark)

    Marrocchelli, Dario; Chatzichristodoulou, Christodoulos; Bishop, Sean R.

    2014-01-01

    Chemical expansion refers to the spatial dilation of a material that occurs upon changes in its composition. When this dilation is caused by a gradual, iso-structural increase in the lattice parameter with composition, it is related to the composition change by the stoichiometric expansion coeffi...... are provided for changes in oxygen content in fluorite, perovskite, and Ruddlesden-Popper (K2NiF4) phase materials used in solid oxide fuel cells....

  14. The effect of pozzolans and slag on the expansion of mortars cured at elevated temperature. Part I: Expansive behaviour

    Energy Technology Data Exchange (ETDEWEB)

    T. Ramlochan; P. Zacarias; M.D.A. Thomas; R.D. Hooton [University of Toronto, Toronto, ON (Canada)

    2003-06-01

    The expansive behaviour of heat-cured mortars containing pozzolans and slag was investigated. In most cases, the addition of any amount of these materials to the mixture typically reduced the long-term expansion, slowed the rate of expansion, and delayed the onset of expansion. However, the efficacy of a particular pozzolan or slag in controlling expansion may depend on its Al{sub 2}O{sub 3} content. Metakaolin, which contains a high amount of reactive Al{sub 2}O{sub 3}, was the most effective at controlling expansion at relatively low cement replacement levels. Slag and fly ash, which are also sources of Al{sub 2}O{sub 3}, were also effective at suppressing expansion at higher replacement levels. Silica fume was less effective at controlling expansion at conventional replacement levels, and even at higher replacement levels expansion may only be delayed.

  15. Morse basis expansion applied to diatomic molecules

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Emanuel F. de, E-mail: eflima@rc.unesp.br [Departamento de Estatística, Matemática Aplicada e Computação, Instituto de Geociências e Ciências Exatas, Universidade Estadual Paulista – UNESP, Rio Claro, São Paulo 13506-900 (Brazil)

    2012-02-20

    This work explores the use of the eigenfunctions of the Morse potential with a infinite barrier at long range to solve the radial Schrödinger equation for diatomic molecules. Analytical formulas are obtained for the kinetic energy operator matrix elements in the Morse basis. The Morse basis expansion is applied to find the vibrational–rotational levels of the sodium molecule in the electronic ground state. -- Highlights: ► The Morse potential basis is invoked to find the rovibrational levels of diatomic molecules. ► Analytical formulas for the kinetic energy operator in the Morse basis are obtained. ► The results of the Morse basis expansion show good agreement with the Fourier Grid technique.

  16. Polyhomogeneous expansions from time symmetric initial data

    Science.gov (United States)

    Gasperín, E.; Valiente Kroon, J. A.

    2017-10-01

    We make use of Friedrich’s construction of the cylinder at spatial infinity to relate the logarithmic terms appearing in asymptotic expansions of components of the Weyl tensor to the freely specifiable parts of time symmetric initial data sets for the Einstein field equations. Our analysis is based on the assumption that a particular type of formal expansions near the cylinder at spatial infinity corresponds to the leading terms of actual solutions to the Einstein field equations. In particular, we show that if the Bach tensor of the initial conformal metric does not vanish at the point at infinity then the most singular component of the Weyl tensor decays near null infinity as O(\\tilde{r}-3\\ln \\tilde{r}) so that spacetime will not peel. We also provide necessary conditions on the initial data which should lead to a peeling spacetime. Finally, we show how to construct global spacetimes which are candidates for non-peeling (polyhomogeneous) asymptotics.

  17. $B$ decays in the upsilon expansion

    CERN Document Server

    Hoang, Andre H.; Manohar, Aneesh V.; Hoang, Andre H.; Ligeti, Zoltan; Manohar, Aneesh V.

    1999-01-01

    Theoretical predictions for B decay rates are rewritten in terms of the Upsilon(1S) meson mass instead of the b quark mass, using a modified perturbation expansion. The theoretical consistency of this expansion is shown both at low and high orders. Our method improves the behavior of the perturbation series for semileptonic and nonleptonic inclusive decay modes, as well as for exclusive decay form factors. The results are applied to the determination of the semileptonic B branching ratio, charm counting, the ratio of B -> X tau nu and B -> X e nu decay rates, and form factor ratios in B -> D* e nu decay. We also comment on why it is not possible to separate perturbative and nonperturbative effects in QCD.

  18. Ultimate load capacities of expansion anchor bolts

    International Nuclear Information System (INIS)

    Czarnecki, R.M.; Manrique, M.A.; Samaddar, S.K.

    1993-01-01

    A summary of available experimental expansion anchor bolt test data is presented. These data were collected as part of programs by the nuclear industry to address generic issues related to verification of seismic adequacy of equipment in nuclear power plants. Some of the data presented are suitable for use in seismic probabilistic risk assessments. For example, mean values of ultimate strength, along with their standard deviation and coefficients of variation, for a range of most typical expansion anchor bolt sizes are presented. Effects of interaction between shear and tension, edge distance, spacing, and cracking of the concrete are presented in a manner that is more suitable for use in deterministic evaluations. Related industry programs to derive anchor bolt capacities are briefly discussed. Recommendations for areas of further investigation are also presented

  19. The replication of expansive production knowledge

    DEFF Research Database (Denmark)

    Wæhrens, Brian Vejrum; Yang, Cheng; Madsen, Erik Skov

    2012-01-01

    Purpose – With the aim to support offshore production line replication, this paper specifically aims to explore the use of templates and principles to transfer expansive productive knowledge embedded in a production line and understand the contingencies that influence the mix of these approaches....... Design/methodology/approach – Two case studies are introduced. Empirical data were collected over a period of two years based on interviews and participating observations. Findings – The findings show that (1) knowledge transfer within the replication of a production line is a stepwise expansive process......; and (2) rather than being viewed as alternative approaches, templates and principles should be seen as complementary once the transfer motive moves beyond pure replication. Research limitations – The concepts introduced in this paper were derived from two Danish cases. While acceptable for theory...

  20. Expansion planning for electrical generating systems

    International Nuclear Information System (INIS)

    1984-01-01

    The guidebook outlines the general principles of electric power system planning in the context of energy and economic planning in general. It describes the complexities of electric system expansion planning that are due to the time dependence of the problem and the interrelation between the main components of the electric system (generation, transmission and distribution). Load forecasting methods are discussed and the principal models currently used for electric system expansion planning presented. Technical and economic information on power plants is given. Constraints imposed on power system planning by plant characteristics (particularly nuclear power plants) are discussed, as well as factors such as transmission system development, environmental considerations, availability of manpower and financial resources that may affect the proposed plan. A bibliography supplements the references that appear in each chapter, and a comprehensive glossary defines terms used in the guidebook

  1. Eta-expansion does The Trick

    DEFF Research Database (Denmark)

    Danvy, Olivier; Malmkjær, Karoline; Palsberg, Jens

    1996-01-01

    Partial-evaluation folklore has it that massaging one's source programs can make them specialize better. In Jones, Gomard, and Sestoft's recent textbook, a whole chapter is dedicated to listing such “binding-time improvements”: nonstandard use of continuation-passing style, eta-expansion, and a p......Partial-evaluation folklore has it that massaging one's source programs can make them specialize better. In Jones, Gomard, and Sestoft's recent textbook, a whole chapter is dedicated to listing such “binding-time improvements”: nonstandard use of continuation-passing style, eta...... across dynamic case expressions. This requirement precisely accounts for the nonstandard use of continuation-passing style encountered in partial evaluation. Eta-expansion thus acts as a uniform binding-time coercion between values and contexts, be they of function type, product type, or disjoint...

  2. Off-diagonal expansion quantum Monte Carlo.

    Science.gov (United States)

    Albash, Tameem; Wagenbreth, Gene; Hen, Itay

    2017-12-01

    We propose a Monte Carlo algorithm designed to simulate quantum as well as classical systems at equilibrium, bridging the algorithmic gap between quantum and classical thermal simulation algorithms. The method is based on a decomposition of the quantum partition function that can be viewed as a series expansion about its classical part. We argue that the algorithm not only provides a theoretical advancement in the field of quantum Monte Carlo simulations, but is optimally suited to tackle quantum many-body systems that exhibit a range of behaviors from "fully quantum" to "fully classical," in contrast to many existing methods. We demonstrate the advantages, sometimes by orders of magnitude, of the technique by comparing it against existing state-of-the-art schemes such as path integral quantum Monte Carlo and stochastic series expansion. We also illustrate how our method allows for the unification of quantum and classical thermal parallel tempering techniques into a single algorithm and discuss its practical significance.

  3. Off-diagonal expansion quantum Monte Carlo

    Science.gov (United States)

    Albash, Tameem; Wagenbreth, Gene; Hen, Itay

    2017-12-01

    We propose a Monte Carlo algorithm designed to simulate quantum as well as classical systems at equilibrium, bridging the algorithmic gap between quantum and classical thermal simulation algorithms. The method is based on a decomposition of the quantum partition function that can be viewed as a series expansion about its classical part. We argue that the algorithm not only provides a theoretical advancement in the field of quantum Monte Carlo simulations, but is optimally suited to tackle quantum many-body systems that exhibit a range of behaviors from "fully quantum" to "fully classical," in contrast to many existing methods. We demonstrate the advantages, sometimes by orders of magnitude, of the technique by comparing it against existing state-of-the-art schemes such as path integral quantum Monte Carlo and stochastic series expansion. We also illustrate how our method allows for the unification of quantum and classical thermal parallel tempering techniques into a single algorithm and discuss its practical significance.

  4. Change in the pace of universe expansion

    International Nuclear Information System (INIS)

    Palanque-Delabrouille, N.; Yeche, C.

    2016-01-01

    During the first 8 billion years the universe expansion was slowed down by gravity, at that time the universe was made up mostly of ordinary matter. The accelerating expansion phase we know dates back to 6 billion years ago and now the content of the universe can be divided into: dark energy (73%), dark matter (23%), gas (3.6%) and stars, planets... (0.4%). Quasars which are among the most luminous objects of the universe and whose light can be detected even after having travelled through the universe for 12 billion years, can be used as markers of the matter all along the history of the universe. 3 international projects (SDSS, DESI and LSST) will study, in a complementary way, the period when dark energy overtook ordinary matter. (A.C.)

  5. Reduction Expansion Synthesis for Magnetic Alloy Powders

    Science.gov (United States)

    2015-12-01

    in Figure 1, the Army was able to address its need for printable plastic components, thus enabling a reduction in the total quantity of spare...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release; distribution is unlimited REDUCTION EXPANSION SYNTHESIS FOR...Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202–4302, and to the Office of Management and Budget, Paperwork Reduction Project

  6. The reference electricity expansion plan of Guatemala

    International Nuclear Information System (INIS)

    Santizo, Rodolfo

    2002-01-01

    This presentation prepared by the Deputy Minister of Energy and Mines overviews the following issues: description of electric power infrastructure, price markets, expansion plans, power and energy demand projections through 2010, including bussiness opportunities for private investment on geothermal and hidro electric power production and distribution market. This presentation is intended for private investors who could be interested in bussiness opportunities of energy generation market in Guatemala

  7. Asymptotic expansion of the Keesom integral

    International Nuclear Information System (INIS)

    Abbott, Paul C

    2007-01-01

    The asymptotic evaluation and expansion of the Keesom integral, K(a), is discussed at some length in Battezzati and Magnasco (2004 J. Phys. A: Math. Gen. 37 9677; 2005 J. Phys. A: Math. Gen. 38 6715). Here, using standard identities, it is shown that this triple integral can be reduced to a single integral from which the asymptotic behaviour is readily obtained using Laplace's method. (comment)

  8. Automation of a thermal expansion instrument

    Energy Technology Data Exchange (ETDEWEB)

    Holland, L.L.

    1979-03-01

    Automation of a thermal expansion instrument using a minicomputer system and with analog-to-digital converter inputs and flip-flop relay outputs is described. The necessary hardware link and the software were developed to allow equipment control, data acquisition, data reduction, and report generation by the minicomputer. The design of the automation allows non-programmers to run the experiment, reduce the data, and generate the report.

  9. Electrochemical detection of DNA triplet repeat expansion

    Czech Academy of Sciences Publication Activity Database

    Fojta, Miroslav; Havran, Luděk; Vojtíšková, Marie; Paleček, Emil

    2004-01-01

    Roč. 126, č. 21 (2004), s. 6532-6533 ISSN 0002-7863 R&D Projects: GA AV ČR IAA4004402; GA AV ČR IBS5004355; GA AV ČR KJB4004302; GA AV ČR KSK4055109 Institutional research plan: CEZ:AV0Z5004920 Keywords : DNA triplet repeat expansion * PCR amplification * neurodegenerative diseases Subject RIV: BO - Biophysics Impact factor: 6.903, year: 2004

  10. Theory of thermal expansivity and bulk modulus

    International Nuclear Information System (INIS)

    Kumar, Munish

    2005-01-01

    The expression for thermal expansivity and bulk modulus, claimed by Shanker et al. to be new [Physica B 233 (1977) 78; 245 (1998) 190; J. Phys. Chem. Solids 59 (1998) 197] are compared with the theory of high pressure-high temperature reported by Kumar and coworkers. It is concluded that the Shanker formulation and the relations based on this are equal to the approach of Kumar et al. up to second order

  11. Hubble expansion in a Euclidean framework

    International Nuclear Information System (INIS)

    Alfven, H.

    1979-01-01

    There now seems to be strong evidence for a non-cosmological interpretation of the QSO redshift - in any case, so strong that it is of interest to investigate the consequences. The purpose of this paper is to construct a model of the Hubble expansion which is as far as possible from the conventional Big Bang model without coming in conflict with any well-established observational results (while introducing no new laws of physics). This leads to an essentially Euclidean metagalactic model (see Table I) with very little mass outside one-third or half of the Hubble radius. The total kinetic energy of the Hubble expansion need only to be about 5% of the rest mass energy. Present observations support backwards in time extrapolation of the Hubble expansion to a 'minimum size galaxy' Rsub(m), which may have any value in 0 26 cm. Other arguments speak in favor of a size close to the upper value, say Rsub(m) = 10 26 cm (Table II). As this size is probably about 100 times the Schwarzschild limit, an essentially Euclidean description is allowed. The kinetic energy of the Hubble expansion may derive from an intense QSO-like activity in the minimum size metagalaxy, with an energy release corresponding to the annihilation of a few solar masses per galaxy per year. Some of the conclusions based on the Big Bang hypothesis are criticized and in several cases alternative interpretations are suggested. A comparison between the Euclidean and the conventional models is given in Table III. (orig.)

  12. Cluster expansion and the boxdot conjecture

    Czech Academy of Sciences Publication Activity Database

    Jeřábek, Emil

    2016-01-01

    Roč. 62, č. 6 (2016), s. 608-614 ISSN 0942-5616 R&D Projects: GA AV ČR IAA100190902; GA ČR GBP202/12/G061 Institutional support: RVO:67985840 Keywords : modal logic * boxdot translation * cluster expansion Subject RIV: BA - General Mathematics Impact factor: 0.250, year: 2016 http://onlinelibrary.wiley.com/doi/10.1002/malq.201600036/abstract

  13. Local product structure for expansive homeomorphisms

    OpenAIRE

    Artigue, Alfonso; Brum, Joaquin; Potrie, Rafael

    2008-01-01

    Let $f\\colon M\\to M$ be an expansive homeomorphism with dense topologically hyperbolic periodic points, $M$ a compact manifold. Then there is a local product structure in an open and dense subset of $M$. Moreover, if some topologically hyperbolic periodic point has codimension one, then this local product structure is uniform. In particular, we conclude that the homeomorphism is conjugated to a linear Anosov diffeomorphism of a torus.

  14. Spatial Linkage and Urban Expansion: AN Urban Agglomeration View

    Science.gov (United States)

    Jiao, L. M.; Tang, X.; Liu, X. P.

    2017-09-01

    Urban expansion displays different characteristics in each period. From the perspective of the urban agglomeration, studying the spatial and temporal characteristics of urban expansion plays an important role in understanding the complex relationship between urban expansion and network structure of urban agglomeration. We analyze urban expansion in the Yangtze River Delta Urban Agglomeration (YRD) through accessibility to and spatial interaction intensity from core cities as well as accessibility of road network. Results show that: (1) Correlation between urban expansion intensity and spatial indicators such as location and space syntax variables is remarkable and positive, while it decreases after rapid expansion. (2) Urban expansion velocity displays a positive correlation with spatial indicators mentioned above in the first (1980-1990) and second (1990-2000) period. However, it exhibits a negative relationship in the third period (2000-2010), i.e., cities located in the periphery of urban agglomeration developing more quickly. Consequently, the hypothesis of convergence of urban expansion in rapid expansion stage is put forward. (3) Results of Zipf's law and Gibrat's law show urban expansion in YRD displays a convergent trend in rapid expansion stage, small and medium-sized cities growing faster. This study shows that spatial linkage plays an important but evolving role in urban expansion within the urban agglomeration. In addition, it serves as a reference to the planning of Yangtze River Delta Urban Agglomeration and regulation of urban expansion of other urban agglomerations.

  15. SPATIAL LINKAGE AND URBAN EXPANSION: AN URBAN AGGLOMERATION VIEW

    Directory of Open Access Journals (Sweden)

    L. M. Jiao

    2017-09-01

    Full Text Available Urban expansion displays different characteristics in each period. From the perspective of the urban agglomeration, studying the spatial and temporal characteristics of urban expansion plays an important role in understanding the complex relationship between urban expansion and network structure of urban agglomeration. We analyze urban expansion in the Yangtze River Delta Urban Agglomeration (YRD through accessibility to and spatial interaction intensity from core cities as well as accessibility of road network. Results show that: (1 Correlation between urban expansion intensity and spatial indicators such as location and space syntax variables is remarkable and positive, while it decreases after rapid expansion. (2 Urban expansion velocity displays a positive correlation with spatial indicators mentioned above in the first (1980–1990 and second (1990–2000 period. However, it exhibits a negative relationship in the third period (2000–2010, i.e., cities located in the periphery of urban agglomeration developing more quickly. Consequently, the hypothesis of convergence of urban expansion in rapid expansion stage is put forward. (3 Results of Zipf’s law and Gibrat's law show urban expansion in YRD displays a convergent trend in rapid expansion stage, small and medium-sized cities growing faster. This study shows that spatial linkage plays an important but evolving role in urban expansion within the urban agglomeration. In addition, it serves as a reference to the planning of Yangtze River Delta Urban Agglomeration and regulation of urban expansion of other urban agglomerations.

  16. Tissue expansion in burn sequelae repair.

    Science.gov (United States)

    Tavares Filho, João Medeiros; Belerique, Manoel; Franco, Diogo; Porchat, Carlos Alberto; Franco, Talita

    2007-03-01

    Burns may cause emotional, aesthetic and functional sequelae. Extended or hypertrophic scars are usually difficult to repair using local tissues, and the use of skin grafts may cause further injuries to the donor sites. The use of tissue expanders may offer a better option in the treatment of burn sequelae. This is a report on our experience using tissue expanders in 54 cases (23 patients) of burn sequelae located in different anatomical areas. Fourteen of the patients were female and nine male ranging in age between 5 and 48. The expanders were placed in the subgaleal, submuscular, subfascial or subcutaneous planes. Skin expansion was completed in 50 cases (92.5%). The injured area was removed by advancement flaps in 44 cases and by transposition flaps in 6 of them. Primary expansion was performed in 42 cases and reexpansion in 12. The rate of complications was 24.07%, of which 30.8% were considered to be absolute and 69.2% relative. Tissue expansion is an excellent option for burn sequelae treatment because it provides skin of similar local characteristics and does not damage the donor site. The procedure can be repeated in the event of major sequelae (reexpansion).

  17. Asymptotic expansions for the Gaussian unitary ensemble

    DEFF Research Database (Denmark)

    Haagerup, Uffe; Thorbjørnsen, Steen

    2012-01-01

    Let g : R ¿ C be a C8-function with all derivatives bounded and let trn denote the normalized trace on the n × n matrices. In Ref. 3 Ercolani and McLaughlin established asymptotic expansions of the mean value ¿{trn(g(Xn))} for a rather general class of random matrices Xn, including the Gaussian U...... and covariance considered above correspond to, respectively, the one- and two-dimensional Cauchy (or Stieltjes) transform of the ....... Unitary Ensemble (GUE). Using an analytical approach, we provide in the present paper an alternative proof of this asymptotic expansion in the GUE case. Specifically we derive for a random matrix Xn that where k is an arbitrary positive integer. Considered as mappings of g, we determine the coefficients...... aj(g), j ¿ N, as distributions (in the sense of L. Schwarts). We derive a similar asymptotic expansion for the covariance Cov{Trn[f(Xn)], Trn[g(Xn)]}, where f is a function of the same kind as g, and Trn = n trn. Special focus is drawn to the case where and for ¿, µ in C\\R. In this case the mean...

  18. Renormalizations and operator expansion in sigma model

    International Nuclear Information System (INIS)

    Terentyev, M.V.

    1988-01-01

    The operator expansion (OPE) is studied for the Green function at x 2 → 0 (n(x) is the dynamical field ofσ-model) in the framework of the two-dimensional σ-model with the O(N) symmetry group at large N. As a preliminary step we formulate the renormalization scheme which permits introduction of an arbitrary intermediate scale μ 2 in the framework of 1/N expansion and discuss factorization (separation) of small (p μ) momentum region. It is shown that definition of composite local operators and coefficient functions figuring in OPE is unambiguous only in the leading order in 1/N expansion when dominant are the solutions with extremum of action. Corrections of order f(μ 2 )/N (here f(μ 2 ) is the effective interaction constant at the point μ 2 ) in composite operators and coefficient functions essentially depend on factorization method of high and low momentum regions. It is shown also that contributions to the power corrections of order m 2 x 2 f(μ 2 )/N in the Green function (here m is the dynamical mass-scale factor in σ-model) arise simultaneously from two sources: from the mean vacuum value of the composite operator n ∂ 2 n and from the hard particle contributions in the coefficient function of unite operator. Due to the analogy between σ-model and QCD the obtained result indicates theoretical limitations to the sum rule method in QCD. (author)

  19. FORECASTING URBAN EXPANSION BASED ON NIGHT LIGHTS

    Directory of Open Access Journals (Sweden)

    D. Stathakis

    2016-06-01

    Full Text Available Forecasting urban expansion models are a very powerful tool in the hands of urban planners in order to anticipate and mitigate future urbanization pressures. In this paper, a linear regression forecasting urban expansion model is implemented based on the annual composite night lights time series available from National Oceanic and Atmospheric Administration (NOAA. The product known as 'stable lights' is used in particular, after it has been corrected with a standard intercalibration process to reduce artificial year-to-year fluctuations as much as possible. Forecasting is done for ten years after the end of the time series. Because the method is spatially explicit the predicted expansion trends are relatively accurately mapped. Two metrics are used to validate the process. The first one is the year-to-year Sum of Lights (SoL variation. The second is the year-to-year image correlation coefficient. Overall it is evident that the method is able to provide an insight on future urbanization pressures in order to be taken into account in planning. The trends are quantified in a clear spatial manner.

  20. Effect of graphene nanoplatelets on coefficient of thermal expansion of polyetherimide composite

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Huang, E-mail: huang.wu.84@gmail.com [Composite Materials and Structures Center, Michigan State University, East Lansing, MI 48864 (United States); Department of Chemical Engineering and Material Science, Michigan State University, East Lansing, MI 48864 (United States); Drzal, Lawrence T. [Composite Materials and Structures Center, Michigan State University, East Lansing, MI 48864 (United States); Department of Chemical Engineering and Material Science, Michigan State University, East Lansing, MI 48864 (United States)

    2014-07-01

    Thermal expansion is one of the major concerns for polymer composites. In this research, graphene nanoplatelets (GNPs) were added to polyetherimide (PEId) thermoplastic polymer in order to reduce the coefficient of thermal expansion (CTE) of the injection molded composite. First, the coefficient of linear thermal expansion (LTE) was measured in three directions in the anisotropic coupon: 0°, 90° and the out of plane Z direction. It is found that the GNP particles are very effective in terms of reducing the LTE in 0° direction due to high degree of alignment. After annealing above glass transition temperature, significant increase of 0° LTE and decrease of Z° LTE were observed. The bulk CTE was calculated by adding up the LTEs in all three directions and is found to be independent of annealing. Second, several models were applied to predict both CTE and LTE. It is found that Schapery's lower limit model fits the experimental CTE very well. Chow's model was applied for LTEs in three directions. The behavior of GNP-5/PEId composites is explained by the combination of Chow's model and morphology obtained by scanning electron microscope (SEM). - Highlights: • Coefficient of thermal expansion (CTE) of polymer composite is characterized. • Reduction of linear thermal expansion depends on filler orientation. • Filler orientation is characterized based on the location of the specimen. • Filler orientation is changed by annealing, causing subsequent change in CTE. • CTE and linear thermal expansion coefficient are modeled.

  1. Prediction and control of the coefficient of thermal expansion of concrete

    International Nuclear Information System (INIS)

    Ziegeldorf, S.; Kleiser, K.; Hilsdorf, H.K.

    1979-01-01

    Prediction and control of the coefficient of thermal expansion of concrete. In this report various procedures for the prediction of the coefficient of thermal expansion of concrete are summarized. The values predicted with these procedures are compared to experimental data. In the experimental investigation the coefficient of thermal expansion of various types of aggregates and types of concrete both in a dry and a moist state in the temperature range RT/180 0 C have been measured. The most significant result obtained is that for equal volume fractions the thermal properties of coarse aggregates have a more pronounced effect upon thermal expansion of concrete than those of fine aggregates. In the analysis an attempt has been made to estimate the thermal expansion of concrete from the properties of the concrete components by means of a finite element procedure. On the basis of the experimental data and of the analysis of internal temperature stresses in the concrete a simple relationship for the determination of the coefficient of thermal expansion of concrete has been deduced. In this relationship different thermal properties of coarse and fine aggregates may be taken into account. Compared to other methods this relationship yields, both for dry and for moist concrete, values which are in good agreement with the experimental data. (orig.) [de

  2. Accounting for Debye sheath expansion for proud Langmuir probes in magnetic confinement fusion plasmas

    Science.gov (United States)

    Tsui, C. K.; Boedo, J. A.; Stangeby, P. C.; TCV Team

    2018-01-01

    A Child-Langmuir law-based method for accounting for Debye sheath expansion while fitting the current-voltage I-V characteristic of proud Langmuir probes (electrodes that extend into the volume of the plasma) is described. For Langmuir probes of a typical size used in tokamak plasmas, these new estimates of electron temperature and ion saturation current density values decreased by up to 60% compared to methods that did not account for sheath expansion. Changes to the collection area are modeled using the Child-Langmuir law and effective expansion perimeter lp, and the model is thus referred to as the "perimeter sheath expansion method." lp is determined solely from electrode geometry, so the method may be employed without prior measurement of the magnitude of the sheath expansion effects for a given Langmuir probe and can be used for electrodes of different geometries. This method correctly predicts the non-saturating ΔI/ΔV slope for cold, low-density plasmas where sheath-expansion effects are strong, as well as for hot plasmas where ΔI/ΔV ˜ 0, though it is shown that the sheath can still significantly affect the collection area in these hot conditions. The perimeter sheath expansion method has several advantages compared to methods where the non-saturating current is fitted: (1) It is more resilient to scatter in the I-V characteristics observed in turbulent plasmas. (2) It is able to separate the contributions to the ΔI/ΔV slope from sheath expansion to that of the high energy electron tail in high Te conditions. (3) It calculates the change in the collection area due to the Debye sheath for conditions where ΔI/ΔV ˜ 0 and for V = Vf.

  3. Accounting for Debye sheath expansion for proud Langmuir probes in magnetic confinement fusion plasmas.

    Science.gov (United States)

    Tsui, C K; Boedo, J A; Stangeby, P C

    2018-01-01

    A Child-Langmuir law-based method for accounting for Debye sheath expansion while fitting the current-voltage I-V characteristic of proud Langmuir probes (electrodes that extend into the volume of the plasma) is described. For Langmuir probes of a typical size used in tokamak plasmas, these new estimates of electron temperature and ion saturation current density values decreased by up to 60% compared to methods that did not account for sheath expansion. Changes to the collection area are modeled using the Child-Langmuir law and effective expansion perimeter l p , and the model is thus referred to as the "perimeter sheath expansion method." l p is determined solely from electrode geometry, so the method may be employed without prior measurement of the magnitude of the sheath expansion effects for a given Langmuir probe and can be used for electrodes of different geometries. This method correctly predicts the non-saturating ΔI/ΔV slope for cold, low-density plasmas where sheath-expansion effects are strong, as well as for hot plasmas where ΔI/ΔV ∼ 0, though it is shown that the sheath can still significantly affect the collection area in these hot conditions. The perimeter sheath expansion method has several advantages compared to methods where the non-saturating current is fitted: (1) It is more resilient to scatter in the I-V characteristics observed in turbulent plasmas. (2) It is able to separate the contributions to the ΔI/ΔV slope from sheath expansion to that of the high energy electron tail in high Te conditions. (3) It calculates the change in the collection area due to the Debye sheath for conditions where ΔI/ΔV ∼ 0 and for V = V f .

  4. Tanshinon IIA injection accelerates tissue expansion by reducing the formation of the fibrous capsule.

    Directory of Open Access Journals (Sweden)

    Qingxiong Yu

    Full Text Available The tissue expansion technique has been applied to obtain new skin tissue to repair large defects in clinical practice. The implantation of tissue expander could initiate a host response to foreign body (FBR, which leads to fibrotic encapsulation around the expander and prolongs the period of tissue expansion. Tanshinon IIA (Tan IIA has been shown to have anti-inflammation and immunoregulation effect. The rat tissue expansion model was used in this study to observe whether Tan IIA injection systematically could inhibit the FBR to reduce fibrous capsule formation and accelerate the process of tissue expansion. Forty-eight rats were randomly divided into the Tan IIA group and control group with 24 rats in each group. The expansion was conducted twice a week to maintain a capsule pressure of 60 mmHg. The expansion volume and expanded area were measured. The expanded tissue in the two groups was harvested, and histological staining was performed; proinflammatory cytokines such as tumor necrosis factor-α (TNF-α, interleukin-6 (IL-6 and interleukin-1β (IL-1β and transforming growth factor-β (TGF-β were examined. The expansion volume and the expanded area in the Tan IIA group were greater than that of the control group. The thickness of the fibrous capsule in the Tan IIA group was reduced with no influence on the normal skin regeneration. Decreased infiltration of macrophages, lower level of TNF-α, IL-6, IL-1β and TGF-β, less proliferating myofibroblasts and enhanced neovascularization were observed in the Tan IIA group. Our findings indicated that the Tan IIA injection reduced the formation of the fibrous capsule and accelerated the process of tissue expansion by inhibiting the FBR.

  5. The relationship between intravascular volume expansion and natriuresis in developing puppies.

    Science.gov (United States)

    Aladjem, M; Spitzer, A; Goldsmith, D I

    1982-10-01

    The role played by the relative degree of expansion of the intravascular and extravascular compartments in limiting the natriuretic response of fluid-loaded developing animals was determined in 1-, 2-, 3- and 6-wk-old puppies. Volume expansion was induced by infusing either isotonic saline, 10% body weight or isoncotic albumin in saline 5% body weight, and measurements of glomerular filtration rate, sodium excretion, fractional excretion of sodium, and plasma volume were made. Each expansion procedure resulted in an increase in the absolute excretion of sodium at all ages (P less than 0.001). The greatest natriuretic effect was observed in the 3-wk-old puppies, the average of the two solutions being 19, 30, 70, and 28 muEq/min/kg in the 1, 2, 3, and 6-wk-old animals, respectively. The difference in natriuresis among the age groups was due predominantly to differences in the magnitude of the increase in fractional excretion of sodium. At all ages, a greater absolute excretion of sodium was encountered during volume expansion with saline than observed with albumin (P less than 0.05). The intravascular volume increased by a similar % at all ages (P greater than 0.1), and saline and albumin yielded equivalent degrees of intravascular expansion (approximately 50%). The results demonstrate that age-related changes in natriuretic response to volume expansion cannot be attributed to differences in either the degree of expansion or the distribution of the load. In addition, the observations indicate that the mechanism underlying the difference between the response to isotonic saline and isoncotic albumin in saline is already operative at birth, and that it is independent of nephron heterogeneity since the proportion of superficial nephrons must have changed during the period of nephrogenesis. The collecting duct, which is sensitive to both isotonic saline and isoncotic albumin, is likely to be responsible for the parallel development of the renal response to these two

  6. Linear thermal expansion coefficient of MgAl2O4(s)

    International Nuclear Information System (INIS)

    Dash, A.; Samui, P.; Naik, Y.P.; Chaudhary, Z.S.

    2011-01-01

    The coefficient of linear thermal expansion (α av ) of MgAl 2 O 4 (s) has been determined using a Netzsch 402 PC dilatometer with Al 2 O 3 (s) as the push-rod. The change in length per unit length was recorded as a function of temperature between room temperature to 1273 K at a heating rate of 8 K.min /1 , in argon flowing atmosphere. The average of three measurements was quoted as the α av for MgAl 2 O 4 (s). The linear thermal expansion was measured to an accuracy of ±3%. (author)

  7. Flow properties in expansion tube with helium, argon, air, and CO2

    Science.gov (United States)

    Miller, C. G.

    1974-01-01

    Test flow velocities from 5 to 7 km/sec were generated in a 6-in. expansion tube using helium, argon, air, and CO2 test gases. Pitot pressure profiles across the flow at the test section are presented for the four test gases, and measured flow quantities are compared to computer predicted values. Comparison of predicted and measured flow quantities suggests the expansion to be near thermochemical equilibrium for all test gases and implies the existence of a totally reflected shock at the secondary diaphragm. Argon, air, and CO2 flows were observed to attenuate while traversing the acceleration section, whereas no attenuation was observed for helium.

  8. Expansion of mouse sertoli cells on microcarriers.

    Science.gov (United States)

    Shi, B; Zhang, S; Wang, Y; Zhuang, Y; Chu, J; Zhang, S; Shi, X; Bi, J; Guo, M

    2010-06-01

    Sertoli cells (SCs) have been described as the 'nurse cells' of the testis whose primary function is to provide essential growth factors and create an appropriate environment for development of other cells [for example, germinal and nerve stem cells (NSCs), used here]. However, the greatest challenge at present is that it is difficult to obtain sufficient SCs of normal physiological function for cell transplantation and biological medicine, largely due to traditional static culture parameter difficult to be monitored and scaled up. Operational stirred culture conditions for in vitro expansion and differentiation of SCs need to be optimized for large-scale culture. In this study, the culturing process for primary SC expansion and maintaining lack of differentiation was optimized for the first time, by using microcarrier bead technology in spinner flask culture. Effects of various feeding/refreshing regimes, stirring speeds, seed inoculum levels of SCs, and concentrations of microcarrier used for expansion of mouse SCs were also explored. In addition, pH, osmotic pressure and metabolic variables including consumption rates of glucose, glutamine, amino acids, and formation rates of lactic acid and ammonia, were investigated in culture. After 6 days, maximal cell densities achieved were 4.6 x 10(6) cells/ml for Cytodex-1 in DMEM/FBS compared to 4.8 x 10(5) cells/ml in static culture. Improved expansion was achieved using an inoculum of 1 x 10(5) cells/ml and microcarrier concentration of 3 mg/ml at stirring speed of 30 rpm. RESULTS indicated that medium replacement (50% changed everyday) resulted in supply of nutrients and removal of waste products inhibiting cell growth, that lead to maintenance of cultures in steady state for several days. These conditions favoured preservation of SCs in the undifferentiated state and significantly increased their physiological activity and trophic function, which were assessed by co-culturing with NSCs and immunostaining. Data

  9. A summation procedure for expansions in orthogonal polynomials

    International Nuclear Information System (INIS)

    Garibotti, C.R.; Grinstein, F.F.

    1977-01-01

    Approximants to functions defined by formal series expansions in orthogonal polynomials are introduced. They are shown to be convergent even out of the elliptical domain where the original expansion converges

  10. Asymptotic expansion of the wavelet transform with error term

    OpenAIRE

    Pathak, R S; Pathak, Ashish

    2014-01-01

    UsingWong's technique asymptotic expansion for the wavelet transform is derived and thereby asymptotic expansions for Morlet wavelet transform, Mexican Hat wavelet transform and Haar wavelet transform are obtained.

  11. Lessons from Early Medicaid Expansions Under Health Reform..

    Data.gov (United States)

    U.S. Department of Health & Human Services — Lessons from Early Medicaid Expansions Under Health Reform, Interviews with Medicaid Officials In a new study entitled Lessons from Early Medicaid Expansions Under...

  12. Negative Thermal Expansion and Ferroelectric Oxides in Electronic Device Composites

    Science.gov (United States)

    Trujillo, Joy Elizabeth

    Electronic devices increasingly pervade our daily lives, driving the need to develop components which have material properties that can be designed to target a specific need. The principle motive of this thesis is to investigate the effects of particle size and composition on three oxides which possess electronic and thermal properties essential to designing improved ceramic composites for more efficient, high energy storage devices. A metal matrix composite project used the negative thermal expansion oxide, ZrW2O 8, to offset the high thermal expansion of the metal matrix without sacrificing high thermal conductivity. Composite preparation employed a powder mixing technique to achieve easy composition control and homogenous phase distribution in order to build composites which target a specific coefficient of thermal expansion (CTE). A tailorable CTE material is desirable for overcoming thermomechanical failure in heat sinks or device casings. This thesis also considers the particle size effect on dielectric properties in a common ferroelectric perovskite, Ba1-xSrxTiO 3. By varying the Ba:Sr ratio, the Curie temperature can be adjusted and by reducing the particle size, the dielectric constant can be increased and hysteresis decreased. These conditions could yield anonymously large dielectric constants near room temperature. However, the ferroelectric behavior has been observed to cease below a minimum size of a few tens of nanometers in bulk or thin film materials. Using a new particle slurry approach, electrochemical impedance spectroscopy allows dielectric properties to be determined for nanoparticles, as opposed to conventional methods which measure only bulk or thin film dielectric properties. In this manner, Ba1-xSrxTiO3 was investigated in a new size regime, extending the theory on the ferroelectric behavior to film heterostructures of STO/YSZ are used in electrochemical energy devices due to their enhanced interfacial ionic conductivity. This work

  13. Moralistic gods, supernatural punishment and the expansion of human sociality.

    Science.gov (United States)

    Purzycki, Benjamin Grant; Apicella, Coren; Atkinson, Quentin D; Cohen, Emma; McNamara, Rita Anne; Willard, Aiyana K; Xygalatas, Dimitris; Norenzayan, Ara; Henrich, Joseph

    2016-02-18

    Since the origins of agriculture, the scale of human cooperation and societal complexity has dramatically expanded. This fact challenges standard evolutionary explanations of prosociality because well-studied mechanisms of cooperation based on genetic relatedness, reciprocity and partner choice falter as people increasingly engage in fleeting transactions with genetically unrelated strangers in large anonymous groups. To explain this rapid expansion of prosociality, researchers have proposed several mechanisms. Here we focus on one key hypothesis: cognitive representations of gods as increasingly knowledgeable and punitive, and who sanction violators of interpersonal social norms, foster and sustain the expansion of cooperation, trust and fairness towards co-religionist strangers. We tested this hypothesis using extensive ethnographic interviews and two behavioural games designed to measure impartial rule-following among people (n = 591, observations = 35,400) from eight diverse communities from around the world: (1) inland Tanna, Vanuatu; (2) coastal Tanna, Vanuatu; (3) Yasawa, Fiji; (4) Lovu, Fiji; (5) Pesqueiro, Brazil; (6) Pointe aux Piments, Mauritius; (7) the Tyva Republic (Siberia), Russia; and (8) Hadzaland, Tanzania. Participants reported adherence to a wide array of world religious traditions including Christianity, Hinduism and Buddhism, as well as notably diverse local traditions, including animism and ancestor worship. Holding a range of relevant variables constant, the higher participants rated their moralistic gods as punitive and knowledgeable about human thoughts and actions, the more coins they allocated to geographically distant co-religionist strangers relative to both themselves and local co-religionists. Our results support the hypothesis that beliefs in moralistic, punitive and knowing gods increase impartial behaviour towards distant co-religionists, and therefore can contribute to the expansion of prosociality.

  14. Detection automatique de bulles HI en expansion

    Science.gov (United States)

    Daigle, Anik

    Plusieurs cavités en expansion observées dans le gaz d'hydrogène neutre galactique ont été associées à la présence d'étoiles massives présentant d'intenses vents stellaires ou à des explosions de supernovae. Ces bulles, qui sont remplies de gaz très chaud ( T = 10 5 -10 7 K), tracent donc à la fois les étoiles massives et la phase chaude et ionisée du gaz interstellaire. La morphologie de ces bulles est instable et généralement perturbée par la multitude de structures et de phénomènes existant dans le milieu interstellaire. Leur détection par inspection visuelle est donc difficile et subjective. L'objet de cette thèse est le développement d'une technique de détection automatique et objective de bulles en expansion dans le gaz d'hydrogène neutre de la Voie lactée. Les bulles à progéniteurs stellaires présentent toutes des vitesses d'expansion comprises entre 6 et 19 km s -1 . Une telle caractéristique peut généralement être reconnue dans les spectres en vitesse des cubes de données à 21 cm de l'hydrogène neutre. Notre technique de détection a donc été fondée sur la reconnaissance automatique de la signature d'une expansion à [6, 19] km s -1 dans les spectres en vitesse. La caractérisation et la généralisation de la signature dynamique propre à une bulle en expansion a été confiée à des réseaux de neurones artificiels. Des validations subséquentes, dont certaines liées à la morphologie, ont ensuite été appliquées. La technique a été testée sur onze bulles connues, dont dix ont pu être détectées. La technique a aussi été employée pour la réalisation d'un relevé dans la région du bras de Persée. La distribution spatiale des objets détectés s'est révélée suivre la distribution des étoiles du disque de la Voie lactée. De plus, la distribution selon le rayon et selon la vitesse d'expansion des bulles détectées de rayons plus petits que 10 pc correspondent aux distributions dérivées du mod

  15. Edgeworth expansion for functionals of continuous diffusion processes

    DEFF Research Database (Denmark)

    Podolskij, Mark; Yoshida, Nakahiro

    This paper presents new results on the Edgeworth expansion for high frequency functionals of continuous diffusion processes. We derive asymptotic expansions for weighted functionals of the Brownian motion and apply them to provide the Edgeworth expansion for power variation of diffusion processes....... Our methodology relies on martingale embedding, Malliavin calculus and stable central limit theorems for semimartingales. Finally, we demonstrate the density expansion for studentized statistics of power variations....

  16. Expansive cements for the manufacture of the concrete protective bandages

    Science.gov (United States)

    Yakymechko, Yaroslav; Voloshynets, Vladyslav

    2017-12-01

    One of the promising directions of the use of expansive cements is making the protective bandages for the maintenance of pipelines. Bandages expansive application of the compositions of the pipeline reinforce the damaged area and reduce stress due to compressive stress in the cylindrical area. Such requirements are best suited for expansive compositions obtained from portland cement and modified quicklime. The article presents the results of expansive cements based on quick lime in order to implement protective bandages pipelines.

  17. Anisotropic lattice expansion of three-dimensional colloidal crystals and its impact on hypersonic phonon band gaps.

    Science.gov (United States)

    Wu, Songtao; Zhu, Gaohua; Zhang, Jin S; Banerjee, Debasish; Bass, Jay D; Ling, Chen; Yano, Kazuhisa

    2014-05-21

    We report anisotropic expansion of self-assembled colloidal polystyrene-poly(dimethylsiloxane) crystals and its impact on the phonon band structure at hypersonic frequencies. The structural expansion was achieved by a multistep infiltration-polymerization process. Such a process expands the interplanar lattice distance 17% after 8 cycles whereas the in-plane distance remains unaffected. The variation of hypersonic phonon band structure induced by the anisotropic lattice expansion was recorded by Brillouin measurements. In the sample before expansion, a phononic band gap between 3.7 and 4.4 GHz is observed; after 17% structural expansion, the gap is shifted to a lower frequency between 3.5 and 4.0 GHz. This study offers a facile approach to control the macroscopic structure of colloidal crystals with great potential in designing tunable phononic devices.

  18. Using Charged Particle Imaging to Study Ultracold Plasma Expansion

    Science.gov (United States)

    Zhang, X. L.; Fletcher, R. S.; Rolston, S. L.

    2009-03-01

    We develop a projection imaging technique to study ultracold plasma dynamics. We image the charged particle spatial distributions by extraction with a high-voltage pulse onto a position-sensitive detector. Measuring the 2D width of the ion image at later times (the ion image size in the first 20 μs is dominated by the Coulomb explosion of the dense ion cloud), we extract the plasma expansion velocity. These velocities at different initial electron temperatures match earlier results obtained by measuring the plasma oscillation frequency. The electron image size slowly decreases during the plasma lifetime because of the strong Coulomb force of the ion cloud on the electrons, electron loss and Coulomb explosion effects.

  19. Thermal expansion and pressure effect in MnWO4

    International Nuclear Information System (INIS)

    Chaudhury, R.P.; Yen, F.; Cruz, C.R. de la; Lorenz, B.; Wang, Y.Q.; Sun, Y.Y.; Chu, C.W.

    2008-01-01

    MnWO 4 has attracted attention because of its ferroelectric property induced by frustrated helical spin order. Strong spin-lattice interaction is necessary to explain ferroelectricity associated with this type of magnetic order. We have conducted thermal expansion measurements along the a, b, c axes revealing the existence of strong anisotropic lattice anomalies at T 1 =7.8 K, the temperature of the magnetic lock-in transition into a commensurate low-temperature (reentrant paraelectric) phase. The effect of hydrostatic pressure up to 1.8 GPa on the FE phase is investigated by measuring the dielectric constant and the FE polarization. The low-temperature commensurate and paraelectric phase is stabilized and the stability range of the ferroelectric phase is diminished under pressure

  20. Dynamic thermal expansivity of liquids near the glass transition.

    Science.gov (United States)

    Niss, Kristine; Gundermann, Ditte; Christensen, Tage; Dyre, Jeppe C

    2012-04-01

    Based on previous works on polymers by Bauer et al. [Phys. Rev. E 61, 1755 (2000)], this paper describes a capacitative method for measuring the dynamical expansion coefficient of a viscous liquid. Data are presented for the glass-forming liquid tetramethyl tetraphenyl trisiloxane (DC704) in the ultraviscous regime. Compared to the method of Bauer et al., the dynamical range has been extended by making time-domain experiments and by making very small and fast temperature steps. The modeling of the experiment presented in this paper includes the situation in which the capacitor is not full because the liquid contracts when cooling from room temperature down to around the glass-transition temperature, which is relevant when measuring on a molecular liquid rather than a polymer.

  1. Rapid replacement of bridge deck expansion joints study - phase I.

    Science.gov (United States)

    2014-12-01

    Bridge deck expansion joints are used to allow for movement of the bridge deck due to thermal expansion, dynamics loading, and : other factors. More recently, expansion joints have also been utilized to prevent the passage of winter de-icing chemical...

  2. Fission gas retention and axial expansion of irradiated metallic fuel

    International Nuclear Information System (INIS)

    Fenske, G.R.; Emerson, J.E.; Savoie, F.E.; Johanson, E.W.

    1986-05-01

    Out-of-reactor experiments utilizing direct electrical heating and infrared heating techniques were performed on irradiated metallic fuel. The results indicate accelerated expansion can occur during thermal transients and that the accelerated expansion is driven by retained fission gases. The results also demonstrate gas retention and, hence, expansion behavior is a function of axial position within the pin

  3. Electrical Resistance Alloys and Low-Expansion Alloys

    DEFF Research Database (Denmark)

    Kjer, Torben

    1996-01-01

    The article gives an overview of electrical resistance alloys and alloys with low thermal expansion. The electrical resistance alloys comprise resistance alloys, heating alloys and thermostat alloys. The low expansion alloys comprise alloys with very low expansion coefficients, alloys with very low...

  4. 36 CFR 72.42 - Expansion and new development.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Expansion and new development... INTERIOR URBAN PARK AND RECREATION RECOVERY ACT OF 1978 Grants for Recovery Action Program Development, Rehabilitation and Innovation § 72.42 Expansion and new development. (a) Expansion. Because the UPARR Program is...

  5. 14 CFR 23.969 - Fuel tank expansion space.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Fuel tank expansion space. 23.969 Section 23.969 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT....969 Fuel tank expansion space. Each fuel tank must have an expansion space of not less than two...

  6. Global operator expansions in conformally invariant relativistic quantum field theory

    International Nuclear Information System (INIS)

    Schoer, B.; Swieca, J.A.; Voelkel, A.H.

    1974-01-01

    A global conformal operator expansions in the Minkowski region in several models and their formulation in the general theory is presented. Whereas the vacuum expansions are termwise manisfestly conformal invariant, the expansions away from the vacuum do not share this property

  7. On the convergence of cluster expansions for polymer gases

    NARCIS (Netherlands)

    Fernandez, R.; Bissacot, R.; Procacci, A.

    2010-01-01

    We compare the different convergence criteria available for cluster expansions of polymer gases subjected to hard-core exclusions, with emphasis on polymers defined as finite subsets of a countable set (e.g. contour expansions and more generally high- and lowtemperature expansions). In order of

  8. Thermal conductivity and thermal expansion of graphite fiber/copper matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, D.L. [Case Western Univ., Cleveland, OH (United States); McDanels, D.L. [Lewis Research Center, Cleveland, OH (United States)

    1994-09-01

    The high specific conductivity of graphite fiber/copper matrix (Gr/Cu) composites offers great potential for high heat flux structures operating at elevated temperatures. To determine the feasibility of applying Gr/Cu composites to high heat flux structures, composite plates were fabricated using unidirectional and cross-plied pitch-based P100 graphite fibers in a pure copper matrix. Thermal conductivity of the composites was measured from room temperature to 1073 K, and thermal expansion was measured from room temperature to 1050 K. The longitudinal thermal conductivity, parallel to the fiber direction, was comparable to pure copper. The transverse thermal conductivity, normal to the fiber direction, was less than that of pure copper and decreased with increasing fiber content. The longitudinal thermal expansion decreased with increasing fiber content. The transverse thermal expansion was greater than pure copper and nearly independent of fiber content.

  9. Thermal conductivity and thermal expansion of graphite fiber/copper matrix composites

    Science.gov (United States)

    Ellis, David L.; Mcdanels, David L.

    1991-01-01

    The high specific conductivity of graphite fiber/copper matrix (Gr/Cu) composites offers great potential for high heat flux structures operating at elevated temperatures. To determine the feasibility of applying Gr/Cu composites to high heat flux structures, composite plates were fabricated using unidirectional and cross-plied pitch-based P100 graphite fibers in a pure copper matrix. Thermal conductivity of the composites was measured from room temperature to 1073 K, and thermal expansion was measured from room temperature to 1050 K. The longitudinal thermal conductivity, parallel to the fiber direction, was comparable to pure copper. The transverse thermal conductivity, normal to the fiber direction, was less than that of pure copper and decreased with increasing fiber content. The longitudinal thermal expansion decreased with increasing fiber content. The transverse thermal expansion was greater than pure copper and nearly independent of fiber content.

  10. Thermal conductivity and thermal expansion of graphite fiber-reinforced copper matrix composites

    Science.gov (United States)

    Ellis, David L.; Mcdanels, David L.

    1993-01-01

    The high specific conductivity of graphite fiber/copper matrix (Gr/Cu) composites offers great potential for high heat flux structures operating at elevated temperatures. To determine the feasibility of applying Gr/Cu composites to high heat flux structures, composite plates were fabricated using unidirectional and cross-plied pitch-based P100 graphite fibers in a pure copper matrix. Thermal conductivity of the composites was measured from room temperature to 1073 K, and thermal expansion was measured from room temperature to 1050 K. The longitudinal thermal conductivity, parallel to the fiber direction, was comparable to pure copper. The transverse thermal conductivity, normal to the fiber direction, was less than that of pure copper and decreased with increasing fiber content. The longitudinal thermal expansion decreased with increasing fiber content. The transverse thermal expansion was greater than pure copper and nearly independent of fiber content.

  11. Hygroscopic Expansion of Aesthetic Restorative Materials: One-Year Report

    Directory of Open Access Journals (Sweden)

    S. Emamieh

    2011-03-01

    Full Text Available Objective: To measure the long-term linear hygroscopic expansion (LHE of several materials using bulked and layered techniques.Materials and Methods: Seven materials were used; Fuji Cap II, Fuji II LC, Photac-Fil Aplicap, Vitremer, Dyract, Tetric and Z100. Ten specimens (6×4 mm were made for each material using layered and bulked techniques (each group comprises five specimens. The specimens were stored in distilled water at 37°C. The length of each specimen was measured immediately after preparation, 24 hours, one week, one month, three months, six months, nine months and one year. This was used to calculate the percentage change in the length of materials. The mean LHE and standard deviation were calculated. Repeated measure analysis and paired sample t-test were used.Results: The type of material and time had a significant effect on LHE. Fuji Cap II and Fuji II LC exhibited no significant changes after one-year and one month, respectively.However, layered specimens of Photac-Fil Aplicap and Tetric showed constant expansionuntil six month, whereas bulked specimens reached the constant length at three months.Constant expansion was obtained for layered and bulked specimens of Dyract and Z100 at six month. Layered specimens of Vitremer showed no significant differences except between 24 hours and one year measurements. But in bulked specimens, the results at ninemonths and one year were significantly different from those obtained at three months and before.Conclusion: Fuji II showed no significant LHE and resin-modified glass ionomer cements (RMGICs exhibited the highest LHE. Dyract maintained an intermediate LHE in comparison with RMGIC and composite resin.

  12. Abnormal thermal expansion properties of cubic NaZn13-type La(Fe,Al)13 compounds.

    Science.gov (United States)

    Li, Wen; Huang, Rongjin; Wang, Wei; Zhao, Yuqiang; Li, Shaopeng; Huang, Chuanjun; Li, Laifeng

    2015-02-28

    The cubic NaZn13-type La(Fe,Al)13 compounds were synthesized, and their linear thermal expansion properties were investigated in the temperature range of 4.2-300 K. It was found that these compounds exhibit abnormal thermal expansion behavior, i.e., pronounced negative thermal expansion (NTE) or zero thermal expansion (ZTE) behavior, below the Curie temperature due to the magnetovolume effect (MVE). Moreover, in the La(Fe,Al)13 compounds, the modification of the coefficient of thermal expansion (CTE) as well as the abnormal thermal expansion (ATE) temperature-window is achieved through optimizing the proportion of Fe and Al. Typically, the average CTE of the LaFe13-xAlx compounds with x = 1.8 reaches as large as -10.47 × 10(-6) K(-1) between 100 and 225 K (ΔT = 125 K). Also, the ZTE temperature-window of the LaFe13-xAlx compounds with x = 2.5 and x = 2.7 could be broadened to 245 K (from 5 to 250 K). Besides, the magnetic properties of these compounds were measured and correlated with the abnormal thermal expansion behavior. The present results highlight the potential application of such La(Fe,Al)13 compounds with abnormal thermal expansion properties in cryogenic engineering.

  13. An alternative clinical approach to achieve greater anterior than posterior maxillary expansion in cleft lip and palate patients.

    Science.gov (United States)

    Oliveira, Dauro Douglas; Bartolomeo, Flávia Uchôa Costa; Cardinal, Lucas; Figueiredo, Daniel Santos Fonseca; Palomo, Juan Martin; Andrade, Ildeu

    2014-11-01

    Cleft lip and palate patients commonly present maxillary constriction, particularly in the anterior region. The aim of this case report was to describe an alternative clinical approach that used a smaller Hyrax screw unconventionally positioned to achieve greater anterior than posterior expansion in patients with complete unilateral cleft lip and palate. The idea presented here is to take advantage of a reduced dimension screw to position it anteriorly. When only anterior expansion was needed (patient 1), the appliance was soldered to the first premolar bands and associated to a transpalatal arch cemented to the first molars. However, when overall expansion was required (patient 2), the screw was positioned anteriorly, but soldered to the first molar bands. Intercanine, premolar, and first molar widths were measured on dental casts with a digital caliper. Pre-expansion and postexpansion radiographs and tomographies were also evaluated. A significant anterior expansion and no intermolar width increase were registered in the first patient. Although patient 2 also presented a greater anterior than posterior expansion, a noteworthy expansion occurred at the molar region. The alternative approach to expand the maxilla in cleft patients reported here caused greater anterior than posterior expansion when the Mini-Hyrax was associated to a transpalatal arch, and its reduced dimension also minimized discomfort and facilitated hygiene.

  14. Thermal expansion investigation of tourmaline-group minerals

    Science.gov (United States)

    Hovis, G.; Scott, B.; Altomare, C.; Tomaino, G.

    2012-04-01

    In recent years one aim of this laboratory has been the characterization of thermal expansion in various mineral groups with an eye toward evaluation of the extent to which chemical composition affects expansion behaviour. We have undertaken studies on various mineral series including alkali feldspar, plagioclase, Ba/K-feldspar, Rb/K feldspar, nepheline/kalsilite minerals of various excess Si contents, and F/Cl/OH apatite. We turn our attention now to the tourmaline mineral system, which is of interest because of its wide variation in chemical composition, as well as its structural complexity. We have obtained multiple chemically-characterized tourmaline specimens from the U.S. National Museum of Natural History and also from George Rossman. Six specimens have been investigated so far, including elbaite, rossmanite, uvite, buergerite, schorl, and foitite. High-temperature X-ray powder diffraction measurements have been made from room temperature to 1000 °C at 75° intervals. X-ray peak positions were corrected utilizing NIST SRM 640a silicon as an internal standard. Peaks were indexed manually based on data in the literature; unit-cell dimensions were computed utilizing the software of Holland and Redfern (1997, Mineralogical Magazine). V-T relationships are generally linear, or close to it, up to the breakdown temperatures of all specimens. Coefficients of thermal expansion have been computed as (ΔV/ΔT)*(1/V0C), where V0C is the extrapolated volume intercept at 0 °C based on the various linear V-T relationships. Among the six specimens, all except foitite give thermal expansion coefficients between 23 and 26 x 10-6 deg-1. Foitite has a flatter V-T slope and thus expands less, giving a thermal expansion coefficient of 18 x 10-6. Based on the initial data, the relative uniformity of expansion behaviour in this system implies that any volumes of mixing in this system will be essentially constant with temperature, recognizing that this conclusion is based on the

  15. Porous composite with negative thermal expansion obtained by photopolymer additive manufacturing

    Directory of Open Access Journals (Sweden)

    Akihiro Takezawa

    2015-07-01

    Full Text Available Additive manufacturing (AM could be a novel method of fabricating composite and porous materials having various effective performances based on mechanisms of their internal geometries. Materials fabricated by AM could rapidly be used in industrial application since they could easily be embedded in the target part employing the same AM process used for the bulk material. Furthermore, multi-material AM has greater potential than usual single-material AM in producing materials with effective properties. Negative thermal expansion is a representative effective material property realized by designing a composite made of two materials with different coefficients of thermal expansion. In this study, we developed a porous composite having planar negative thermal expansion by employing multi-material photopolymer AM. After measurement of the physical properties of bulk photopolymers, the internal geometry was designed by topology optimization, which is the most effective structural optimization in terms of both minimizing thermal stress and maximizing stiffness. The designed structure was converted to a three-dimensional stereolithography (STL model, which is a native digital format of AM, and assembled as a test piece. The thermal expansions of the specimens were measured using a laser scanning dilatometer. Negative thermal expansion corresponding to less than −1 × 10−4 K−1 was observed for each test piece of the N = 3 experiment.

  16. Zirconium titanate: stability and thermal expansion; Titanato de circonio: estabilidad termodinamica y expansion termica

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Lopez, E.; Moreno, R.; Baudin, C.

    2011-07-01

    Zirconium titanate is a well known compound in the field of electro ceramics, although it has also been used in catalyst and sensors applications. The crystallographic thermal expansion anisotropy of this compound makes it a potential candidate as constituent of structural components. In general, to assure the structural integrity and microstructural homogeneity of a ceramic piece, relatively low cooling rates from the fabrication temperature are required. This requirement is essential for zirconium titanate because thermal expansion as well as phase distribution is affected by small variations in the composition and cooling rate. This work reviews the available data on the phase equilibrium relationships in the systems ZrO{sub 2}-TiO{sub 2} and ZrO{sub 2}-TiO{sub 2}-Y{sub 2}O{sub 3}. The main discrepancies as well as the possible origins of them are discussed. Additionally, the crystallographic thermal expansion data in the current literature are reviewed. (Author) 56 refs.

  17. The Affordable Care Act Medicaid Expansions and Personal Finance.

    Science.gov (United States)

    Caswell, Kyle J; Waidmann, Timothy A

    2017-09-01

    Using a novel data set from a major credit bureau, we examine the early effects of the Affordable Care Act Medicaid expansions on personal finance. We analyze less common events such as personal bankruptcy, and more common occurrences such as medical collection balances, and change in credit scores. We estimate triple-difference models that compare individual outcomes across counties that expanded Medicaid versus counties that did not, and across expansion counties that had more uninsured residents versus those with fewer. Results demonstrate financial improvements in states that expanded their Medicaid programs as measured by improved credit scores, reduced balances past due as a percent of total debt, reduced probability of a medical collection balance of $1,000 or more, reduced probability of having one or more recent medical bills go to collections, reduction in the probability of experiencing a new derogatory balance of any type, reduced probability of incurring a new derogatory balance equal to $1,000 or more, and a reduction in the probability of a new bankruptcy filing.

  18. Smoothing expansion rate data to reconstruct cosmological matter perturbations

    International Nuclear Information System (INIS)

    Gonzalez, J.E.; Alcaniz, J.S.; Carvalho, J.C.

    2017-01-01

    The existing degeneracy between different dark energy and modified gravity cosmologies at the background level may be broken by analyzing quantities at the perturbative level. In this work, we apply a non-parametric smoothing (NPS) method to reconstruct the expansion history of the Universe ( H ( z )) from model-independent cosmic chronometers and high- z quasar data. Assuming a homogeneous and isotropic flat universe and general relativity (GR) as the gravity theory, we calculate the non-relativistic matter perturbations in the linear regime using the H ( z ) reconstruction and realistic values of Ω m 0 and σ 8 from Planck and WMAP-9 collaborations. We find a good agreement between the measurements of the growth rate and f σ 8 ( z ) from current large-scale structure observations and the estimates obtained from the reconstruction of the cosmic expansion history. Considering a recently proposed null test for GR using matter perturbations, we also apply the NPS method to reconstruct f σ 8 ( z ). For this case, we find a ∼ 3σ tension (good agreement) with the standard relativistic cosmology when the Planck (WMAP-9) priors are used.

  19. Canal expansive laminoplasty in the management of cervical spondylotic myelopathy.

    Science.gov (United States)

    Kaplan, Leon; Bronstein, Yigal; Barzilay, Yair; Hasharoni, Amir; Finkelstein, Joel

    2006-08-01

    Cervical spondylotic myelopathy is often progressive and leads to motor and sensory impairments in the arms and legs. Canal expansive laminoplasty was initially described in Japan as an alternative to the traditional laminectomy approach. The results of this approach have not previously been described in the Israeli population. To describe the technique of CEL and present our clinical results in the management of patients with CSM due to multilevel compressive disease. All patients undergoing CEL during the period 1984-2000 were identified. Of these, 24 of 25 patients had complete clinical information. Mean follow-up was 18 months (range 4-48). Mean age was 60 years (range 45-72). One patient underwent CEL at three levels, 22 patients at four to five levels and 1 patient at six levels The primary outcome measure was improvement in spinal cord function (according to the Nurick classification). Twenty-three (96%) of the patients experienced relief of their symptoms. Of these, 11 patients showed improvement in their Nurick grade, 12 patients were unchanged and one had worsening. Intraoperative complications (epidural bleeding and dural tear) occurred in six patients. Two patients developed a late kyphosis. Our treatment of choice for multilevel CSM is canal expansive laminoplasty as initially described by Hirabayashi. It provides the ability for posterior surgical decompression without compromising the mechanical stability of the spine. This approach has the benefit of not requiring internal fixation and fusion. Our clinical outcome and surgical complication rate are comparable to those in the literature.

  20. Private randomness expansion with untrusted devices

    International Nuclear Information System (INIS)

    Colbeck, Roger; Kent, Adrian

    2011-01-01

    Randomness is an important resource for many applications, from gambling to secure communication. However, guaranteeing that the output from a candidate random source could not have been predicted by an outside party is a challenging task, and many supposedly random sources used today provide no such guarantee. Quantum solutions to this problem exist, for example a device which internally sends a photon through a beamsplitter and observes on which side it emerges, but, presently, such solutions require the user to trust the internal workings of the device. Here, we seek to go beyond this limitation by asking whether randomness can be generated using untrusted devices-even ones created by an adversarial agent-while providing a guarantee that no outside party (including the agent) can predict it. Since this is easily seen to be impossible unless the user has an initially private random string, the task we investigate here is private randomness expansion. We introduce a protocol for private randomness expansion with untrusted devices which is designed to take as input an initially private random string and produce as output a longer private random string. We point out that private randomness expansion protocols are generally vulnerable to attacks that can render the initial string partially insecure, even though that string is used only inside a secure laboratory; our protocol is designed to remove this previously unconsidered vulnerability by privacy amplification. We also discuss extensions of our protocol designed to generate an arbitrarily long random string from a finite initially private random string. The security of these protocols against the most general attacks is left as an open question.

  1. Expansion control for cementation of incinerated ash

    International Nuclear Information System (INIS)

    Nakayama, T.; Suzuki, S.; Hanada, K.; Tomioka, O.; Sato, J.; Irisawa, K.; Kato, J.; Kawato, Y.; Meguro, Y.

    2015-01-01

    A method, in which incinerated ash is solidified with a cement material, has been developed to dispose of radioactive incinerated ash waste. A small amount of metallic Al, which was not oxidized in the incineration, existed in the ash. When such ash was mixed with a cement material and water, alkaline components in the ash and the cement were dissolved in the mixing water and then metallic Al reaction with the alkaline compounds resulted in generation of H 2 . Because the H 2 generation began immediately just after the mixing, H 2 bubbles pushed up the mixed grout material and an expanded solidified form was obtained. The expansion leads to lowering the strength of the solidified form and making harmful void. In this study, we tried to control H 2 generation from the reaction of metallic Al in the cementation by means of following two methods, one was a method to let metallic Al react prior to the cementation and the other was a method to add an expansion inhibitor that made an oxide film on the surface of metallic Al. In the pre-treatment, the ash was soaked in water in order to let metallic Al react with it, and then the ash with the immersion solution was dried at 105 Celsius degrees. The pre-treated ash was mixed with an ordinary portland cement and water. The inhibitor of lithium nitrite, sodium nitrite, phosphoric acid, or potassium dihydrogen phosphate was added at the mixing process. The solidified forms prepared using the pre-treated ash and lithium nitrite were not expanded. Phosphoric acid and sodium nitrite were effective for expansion control, but potassium dihydrogen phosphate did not work. (authors)

  2. Seasonal hydroclimatic impacts of Sun Corridor expansion

    International Nuclear Information System (INIS)

    Georgescu, M; Mahalov, A; Moustaoui, M

    2012-01-01

    Conversion of natural to urban land forms imparts influence on local and regional hydroclimate via modification of the surface energy and water balance, and consideration of such effects due to rapidly expanding megapolitan areas is necessary in light of the growing global share of urban inhabitants. Based on a suite of ensemble-based, multi-year simulations using the Weather Research and Forecasting (WRF) model, we quantify seasonally varying hydroclimatic impacts of the most rapidly expanding megapolitan area in the US: Arizona’s Sun Corridor, centered upon the Greater Phoenix metropolitan area. Using a scenario-based urban expansion approach that accounts for the full range of Sun Corridor growth uncertainty through 2050, we show that built environment induced warming for the maximum development scenario is greatest during the summer season (regionally averaged warming over AZ exceeds 1 °C). Warming remains significant during the spring and fall seasons (regionally averaged warming over AZ approaches 0.9 °C during both seasons), and is least during the winter season (regionally averaged warming over AZ of 0.5 °C). Impacts from a minimum expansion scenario are reduced, with regionally averaged warming ranging between 0.1 and 0.3 °C for all seasons except winter, when no warming impacts are diagnosed. Integration of highly reflective cool roofs within the built environment, increasingly recognized as a cost-effective option intended to offset the warming influence of urban complexes, reduces urban-induced warming considerably. However, impacts on the hydrologic cycle are aggravated via enhanced evapotranspiration reduction, leading to a 4% total accumulated precipitation decrease relative to the non-adaptive maximum expansion scenario. Our results highlight potentially unintended consequences of this adaptation approach within rapidly expanding megapolitan areas, and emphasize the need for undeniably sustainable development paths that account for

  3. Consequences of expansion joint bellows rupture

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W.L.; Miller, R.F.; Cramer, D.S.

    1992-01-01

    Expansion joints are used in piping systems to accommodate pipe deflections during service and to facilitate fitup. Typically, the expansion joint bellows is the thinnest part of the pressure boundary, bellows rupture frequencies are typically several orders of magnitude higher than pipe rupture frequencies. This paper reviews an effort to estimate the flow rates associated with bellows rupture. The Level I PRA (probabilistic risk assessment) for the Savannah River Site production reactors made the bounding assumption that bellows rupture would produce the maximum possible leakage - that of a double-ended guillotine break (DEGB). This assumption resulted in predictions of flooding of the reactor building with a high conditional probability that a Loss of Pumping Accident and core melting would follow. This paper describes analyses that were performed to develop a realistic break area and leak rate resulting from bellows rupture and therefore reduce the impact that bellows rupture can have on the estimated total core melt frequency. In the event of a 360 degree circumferential break of the bellows the resulting two sections will separate to the point where the force from the internal pressure acting to push the bellows open is just balanced by the spring force of the bellows itself. For the bellows addressed in this analysis, the equilibrium separation distance is 0.7 inches with normal pump lineup. The opening area is influenced by any initial compression or extension due to installation alignment, and by any operational displacements such as thermal expansion of the adjoining pipe. The influence of such factors is considered and the impact on the flooding rate and, hence, core melt frequency is reviewed.

  4. Consequences of expansion joint bellows rupture

    Energy Technology Data Exchange (ETDEWEB)

    Daugherty, W.L.; Miller, R.F.; Cramer, D.S.

    1992-11-01

    Expansion joints are used in piping systems to accommodate pipe deflections during service and to facilitate fitup. Typically, the expansion joint bellows is the thinnest part of the pressure boundary, bellows rupture frequencies are typically several orders of magnitude higher than pipe rupture frequencies. This paper reviews an effort to estimate the flow rates associated with bellows rupture. The Level I PRA (probabilistic risk assessment) for the Savannah River Site production reactors made the bounding assumption that bellows rupture would produce the maximum possible leakage - that of a double-ended guillotine break (DEGB). This assumption resulted in predictions of flooding of the reactor building with a high conditional probability that a Loss of Pumping Accident and core melting would follow. This paper describes analyses that were performed to develop a realistic break area and leak rate resulting from bellows rupture and therefore reduce the impact that bellows rupture can have on the estimated total core melt frequency. In the event of a 360 degree circumferential break of the bellows the resulting two sections will separate to the point where the force from the internal pressure acting to push the bellows open is just balanced by the spring force of the bellows itself. For the bellows addressed in this analysis, the equilibrium separation distance is 0.7 inches with normal pump lineup. The opening area is influenced by any initial compression or extension due to installation alignment, and by any operational displacements such as thermal expansion of the adjoining pipe. The influence of such factors is considered and the impact on the flooding rate and, hence, core melt frequency is reviewed.

  5. Private randomness expansion with untrusted devices

    Energy Technology Data Exchange (ETDEWEB)

    Colbeck, Roger; Kent, Adrian, E-mail: rcolbeck@perimeterinstitute.ca, E-mail: a.p.a.kent@damtp.cam.ac.uk [Perimeter Institute for Theoretical Physics, 31 Caroline Street North, Waterloo, ON N2L 2Y5 (Canada)

    2011-03-04

    Randomness is an important resource for many applications, from gambling to secure communication. However, guaranteeing that the output from a candidate random source could not have been predicted by an outside party is a challenging task, and many supposedly random sources used today provide no such guarantee. Quantum solutions to this problem exist, for example a device which internally sends a photon through a beamsplitter and observes on which side it emerges, but, presently, such solutions require the user to trust the internal workings of the device. Here, we seek to go beyond this limitation by asking whether randomness can be generated using untrusted devices-even ones created by an adversarial agent-while providing a guarantee that no outside party (including the agent) can predict it. Since this is easily seen to be impossible unless the user has an initially private random string, the task we investigate here is private randomness expansion. We introduce a protocol for private randomness expansion with untrusted devices which is designed to take as input an initially private random string and produce as output a longer private random string. We point out that private randomness expansion protocols are generally vulnerable to attacks that can render the initial string partially insecure, even though that string is used only inside a secure laboratory; our protocol is designed to remove this previously unconsidered vulnerability by privacy amplification. We also discuss extensions of our protocol designed to generate an arbitrarily long random string from a finite initially private random string. The security of these protocols against the most general attacks is left as an open question.

  6. The colour and flavour 1/N expansions

    International Nuclear Information System (INIS)

    Veneziano, G.

    General ideas about the colour and flavour 1/N expansions are presented in a non-specialized fashion according to both: a unified approach to meson dynamics (the basic logical scheme, lepton-hadron interactions, hadronic processes in lowest order, higher order effects and the Reggeon calculus); and a possible extension to baryons (difficulties with baryons in dual and gauge theories, possible definition of dual baryons in quantum chromodynamics, lowest order B anti-B and BB scattering: baryonium, Reggeon calculus for processes involving baryons)

  7. Conformal Dimensions via Large Charge Expansion.

    Science.gov (United States)

    Banerjee, Debasish; Chandrasekharan, Shailesh; Orlando, Domenico

    2018-02-09

    We construct an efficient Monte Carlo algorithm that overcomes the severe signal-to-noise ratio problems and helps us to accurately compute the conformal dimensions of large-Q fields at the Wilson-Fisher fixed point in the O(2) universality class. Using it, we verify a recent proposal that conformal dimensions of strongly coupled conformal field theories with a global U(1) charge can be obtained via a series expansion in the inverse charge 1/Q. We find that the conformal dimensions of the lowest operator with a fixed charge Q are almost entirely determined by the first few terms in the series.

  8. Maxillary protraction after surgically assisted maxillary expansion

    Directory of Open Access Journals (Sweden)

    Laurindo Zanco Furquim

    2010-06-01

    Full Text Available This case report describes the orthodontic treatment of a 32-year-old woman with a Class III malocclusion, whose chief compliant was her dentofacial esthetics. The pretreatment lateral cephalometric tracings showed the presence of a Class III dentoskeletal malocclusion with components of maxillary deficiency. After discussion with the patient, the treatment option included surgically assisted rapid maxillary expansion (SARME followed by orthopedic protraction (Sky Hook and Class III elastics. Patient compliance was excellent and satisfactory dentofacial esthetics was achieved after treatment completion.

  9. Expansiveness and Security Through Materials and Design

    OpenAIRE

    Hamblin, Jr., Keith Alan

    2008-01-01

    This is a youth hostel designed to provide maximum functional comfort and efficiency in a relatively confined space. Because of its narrow floor plan, the windows are made large to make the rooms seem bigger and frame the view to the outside by drawing the viewerâ s eye out from the dense interior creating expansion to the outside. The orientation of the structure allows natural light to fill almost the entire interior and invites the cityscape to become a part of the interior spaces. In ...

  10. Kato expansion in quantum canonical perturbation theory

    International Nuclear Information System (INIS)

    Nikolaev, Andrey

    2016-01-01

    This work establishes a connection between canonical perturbation series in quantum mechanics and a Kato expansion for the resolvent of the Liouville superoperator. Our approach leads to an explicit expression for a generator of a block-diagonalizing Dyson’s ordered exponential in arbitrary perturbation order. Unitary intertwining of perturbed and unperturbed averaging superprojectors allows for a description of ambiguities in the generator and block-diagonalized Hamiltonian. We compare the efficiency of the corresponding computational algorithm with the efficiencies of the Van Vleck and Magnus methods for high perturbative orders.

  11. Effects of forest expansion on mountain grassland

    DEFF Research Database (Denmark)

    Guidi, Claudia; Magid, Jakob; Rodeghiero, Mirco

    2014-01-01

    Background and aims. Grassland abandonment followed by forest succession is the dominant land-use change in the European Alps. We studied the impact of current forest expansion on mountain grassland on changes in physical soil organic carbon (SOC) fractions along a land-use and management gradient......, focusing on changes in aggregate stability and particulate organic matter (POM). Methods. Four successional stages were investigated: managed grassland, two transitional phases in which grassland abandonment led to colonization by Picea abies (L.) Karst., and old mixed forest dominated by Fagus sylvatica L...

  12. Derivative expansion and renormalisation group flows

    CERN Document Server

    Litim, Daniel F

    2001-01-01

    We study the convergence of the derivative expansion for flow equations. The convergence strongly depends on the choice for the infrared regularisation. Based on the structure of the flow, we explain why optimised regulators lead to better physical predictions. This is applied to O(N)-symmetric real scalar field theories in 3d, where critical exponents are computed for all N. In comparison to the sharp cut-off regulator, an optimised flow improves the leading order result up to 10%. An analogous reasoning is employed for a proper time renormalisation group. We compare our results with those obtained by other methods.

  13. External momentum expansion in NJL model

    International Nuclear Information System (INIS)

    Huang Mei; Zhao Weiqin; Zhuang Pengfei

    1999-01-01

    In the large N c expansion beyond mean-field approximation, the authors develop a general scheme of SU(2) NJL model including current quark mass explicitly. In the scheme, the constituent quark's propagator is expanded in pions external momentum k, and all the Feynman diagrams are naturally expanded to k 2 term in a unified way. The numerical results show that in the mean field approximation, the effect of current quark mass is invisible, however, the effect of current quark mass can be seen explicitly beyond mean-field approximation for reasonable choices of the parameters in NJL model

  14. Capacity Expansion Modeling for Storage Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Hale, Elaine; Stoll, Brady; Mai, Trieu

    2017-04-03

    The Resource Planning Model (RPM) is a capacity expansion model designed for regional power systems and high levels of renewable generation. Recent extensions capture value-stacking for storage technologies, including batteries and concentrating solar power with storage. After estimating per-unit capacity value and curtailment reduction potential, RPM co-optimizes investment decisions and reduced-form dispatch, accounting for planning reserves; energy value, including arbitrage and curtailment reduction; and three types of operating reserves. Multiple technology cost scenarios are analyzed to determine level of deployment in the Western Interconnection under various conditions.

  15. Double genus expansion for general Ω background

    Science.gov (United States)

    Prudenziati, Andrea

    2016-07-01

    We will show how the refined holomorphic anomaly equation obeyed by the Nekrasov partition function at generic 𝜖1, 𝜖2 values becomes compatible, in a certain two-parameter expansion, with the assumption that both parameters are associated to genus counting. The underlying worldsheet theory will be analyzed and constrained in various ways, and we will provide both physical interpretation and some alternative evidence for this model. Finally, we will use the Gopakumar-Vafa formulation for the refined topological string in order to give a more quantitative description.

  16. Origin of energetic ions in the polar cusp inferred from ion composition measurements by the Viking satellite

    Directory of Open Access Journals (Sweden)

    G. Kremser

    Full Text Available The magnetospheric ion composition spectrometer MICS on the Swedish Viking satellite provided measurements of the ion composition in the energy range 10.1 keV/eleqE/Qleq326.0 keV/e. Data obtained during orbit 842 were used to investigate the ion distribution in the northern polar cusp and its vicinity. The satellite traversed the outer ring current, boundary region, cusp proper and plasma mantle during its poleward movement. H+ and He++ ions were encountered in all of these regions. He+ ions were present only in the ring current. The number of O+ and O++ ions was very small. Heavy high-charge state ions typical for the solar wind were observed for the first time, most of them in the poleward part of the boundary region and in the cusp proper. The H+ ions exhibited two periods with high intensities. One of them, called the BR/CP event, appeared at energies up to 50 keV. It started at the equatorward limit of the boundary region and continued into the cusp proper. Energy spectra indicate a ring current origin for the BR/CP event. Pitch angle distributions show downward streaming of H+ ions at its equatorward limit and upward streaming on the poleward side. This event is interpreted as the result of pitch angle scattering of ring current ions by fluctuations in the magnetopause current layer in combination with poleward convection. The other of the two periods with high H+ ion intensities, called the accelerated ion event, was superimposed on the BR/CP event. It was restricted to energies leq15 keV and occurred in the poleward part of the boundary region. This event is regarded as the high-energy tail of magnetosheath ions that were accelerated while penetrating into the magnetosphere. The cusp region thus contains ions of magnetospheric as well as of magnetosheath origin. The appearance of the ions depends, in addition to the ion source, on the

  17. Basis for calculations in the topological expansion

    International Nuclear Information System (INIS)

    Levinson, M.A.

    1982-12-01

    Investigations aimed at putting the topological theory of particles on a more quantitative basis are described. First, the incorporation of spin into the topological structure is discussed and shown to successfully reproduce the observed lowest mass hadron spectrum. The absence of parity-doubled states represents a significant improvement over previous efforts in similar directions. This theory is applied to the lowest order calculation of elementary hadron coupling constant ratios. SU(6)/sub W/ symmetry is maintained and extended via the notions of topological supersymmetry and universality. Finally, efforts to discover a perturbative basis for the topological expansion are described. This has led to the formulation of off-shell Feynman-like rules which provide a calculational scheme for the strong interaction components of the topological expansion once the zero-entropy connected parts are known. These rules are shown to imply a topological asymptotic freedom. Even though the nonlinear zero-entropy problem cannot itself be treated perturbatively, plausible general assumptions about zero-entropy amplitudes allow immediate qualitative inferences concerning physical hadrons. In particular, scenarios for mass splittings beyond the supersymmetric level are described

  18. Phase cell cluster expansion for phi43

    International Nuclear Information System (INIS)

    Williamson, C.

    1987-01-01

    We complete the work begun by Battle and Federbush in their approach to the phi 4 3 Euclidean field theory. In their papers, they applied a cluster expansion to a phi 4 3 interaction using a diagonal covariance C/sub i//sub j/ = δ/sub i//sub j/. In our model we take the usual covariance C = (-Δ+M 2 ) -1 . Since this is no longer diagonal we must interpolate this covariance to decouple terms. Complications in our model come from an extra term that arises during this interpolation and also from the couplings in integration-by-parts formulas between variables at different scales. The extra term that arises in interpolating the covariance leads to a chain that must sometimes be attached to different places in the tree structure of the expansion. We find more factorials from the additional attachments created doing this and use some of these to cancel a part of the number divergence that arises from the nondiagonal covariance terms in our integration-by-parts formulas. copyright 1987 Academic Press, Inc

  19. Regional population expansion in Eucalyptus globulus.

    Science.gov (United States)

    Yeoh, Suat Hui; Ho, Simon Y W; Thornhill, Andrew H; Foley, William J

    2013-09-01

    Foundation tree species define the structure of forest habitat and influence their ecosystem dynamics. However, there is limited understanding of both the patterns and timing of population fluctuations in foundation trees and how they vary among geographical regions. We have reconstructed the demographic history of five genetically distinct populations of the Tasmanian blue gum (Eucalyptus globulus ssp. globulus) at the species and regional levels, using three nuclear loci sequenced from 104 individuals. Analysis using a Bayesian skyline plot indicated that the species experienced two periods of expansion, commencing in the Pliocene. Regional analyses showed that island populations expanded earlier, but that the rate of expansion was relatively slow when compared to that of the mainland group. This highlights the need for local demographic history to be taken into account when inferring local adaptation for candidate genes. Population growth throughout the Quaternary signals the ability of the species to persist and thrive under the predominantly harsh conditions of this period. Copyright © 2013 Elsevier Inc. All rights reserved.

  20. 
Genetic Code Expansion and Optoproteomics.

    Science.gov (United States)

    Chen, Yuting; Lu, Linjie; Ye, Shixin

    2017-12-01

    Nature has invented photoreceptor proteins that are involved in sensing and response to light in living organisms. Genetic code expansion (GCE) technology has provided new tools to transform light insensitive proteins into novel photoreceptor proteins. It is achieved by the site-specific incorporation of unnatural amino acids (Uaas) that carry light sensitive moieties serving as "pigments" that react to light via photo-decaging, cross-linking, or isomerization. Over the last two decades, various proteins including ion channels, GPCRs, transporters, and kinases have been successfully rendered light responsive owing to the functionalities of Uaas. Very recently, Cas9 protein has been engineered to enable light activation of genomic editing by CRISPR. Those novel proteins have not only led to discoveries of dynamic protein conformational changes with implications in diseases, but also facilitated the screening of ligand-protein and protein-protein interactions of pharmacological significance. This review covers the genetic editing principles for genetic code expansion and design concepts that guide the engineering of light-sensitive proteins. The applications have brought up a new concept of "optoproteomics" that, in contrast to "optogenetics," aims to combine optical methods and site-specific proteomics for investigating and intervening in biological functions.