WorldWideScience

Sample records for pole bodies spb

  1. The molecular architecture of the yeast spindle pole body core determined by Bayesian integrative modeling.

    Science.gov (United States)

    Viswanath, Shruthi; Bonomi, Massimiliano; Kim, Seung Joong; Klenchin, Vadim A; Taylor, Keenan C; Yabut, King C; Umbreit, Neil T; Van Epps, Heather A; Meehl, Janet; Jones, Michele H; Russel, Daniel; Velazquez-Muriel, Javier A; Winey, Mark; Rayment, Ivan; Davis, Trisha N; Sali, Andrej; Muller, Eric G

    2017-11-07

    Microtubule-organizing centers (MTOCs) form, anchor, and stabilize the polarized network of microtubules in a cell. The central MTOC is the centrosome that duplicates during the cell cycle and assembles a bipolar spindle during mitosis to capture and segregate sister chromatids. Yet, despite their importance in cell biology, the physical structure of MTOCs is poorly understood. Here we determine the molecular architecture of the core of the yeast spindle pole body (SPB) by Bayesian integrative structure modeling based on in vivo fluorescence resonance energy transfer (FRET), small-angle x-ray scattering (SAXS), x-ray crystallography, electron microscopy, and two-hybrid analysis. The model is validated by several methods that include a genetic analysis of the conserved PACT domain that recruits Spc110, a protein related to pericentrin, to the SPB. The model suggests that calmodulin can act as a protein cross-linker and Spc29 is an extended, flexible protein. The model led to the identification of a single, essential heptad in the coiled-coil of Spc110 and a minimal PACT domain. It also led to a proposed pathway for the integration of Spc110 into the SPB. © 2017 Viswanath, Bonomi, et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  2. Spindle pole body-anchored Kar3 drives the nucleus along microtubules from another nucleus in preparation for nuclear fusion during yeast karyogamy.

    Science.gov (United States)

    Gibeaux, Romain; Politi, Antonio Z; Nédélec, François; Antony, Claude; Knop, Michael

    2013-02-01

    Nuclear migration during yeast karyogamy, termed nuclear congression, is required to initiate nuclear fusion. Congression involves a specific regulation of the microtubule minus end-directed kinesin-14 motor Kar3 and a rearrangement of the cytoplasmic microtubule attachment sites at the spindle pole bodies (SPBs). However, how these elements interact to produce the forces necessary for nuclear migration is less clear. We used electron tomography, molecular genetics, quantitative imaging, and first principles modeling to investigate how cytoplasmic microtubules are organized during nuclear congression. We found that Kar3, with the help of its light chain, Cik1, is anchored during mating to the SPB component Spc72 that also serves as a nucleator and anchor for microtubules via their minus ends. Moreover, we show that no direct microtubule-microtubule interactions are required for nuclear migration. Instead, SPB-anchored Kar3 exerts the necessary pulling forces laterally on microtubules emanating from the SPB of the mating partner nucleus. Therefore, a twofold symmetrical application of the core principle that drives nuclear migration in higher cells is used in yeast to drive nuclei toward each other before nuclear fusion.

  3. Nuclear inner membrane fusion facilitated by yeast Jem1p is required for spindle pole body fusion but not for the first mitotic nuclear division during yeast mating.

    Science.gov (United States)

    Nishikawa, Shuh-ichi; Hirata, Aiko; Endo, Toshiya

    2008-11-01

    During mating of budding yeast, Saccharomyces cerevisiae, two haploid nuclei fuse to produce a diploid nucleus. The process of nuclear fusion requires two J proteins, Jem1p in the endoplasmic reticulum (ER) lumen and Sec63p, which forms a complex with Sec71p and Sec72p, in the ER membrane. Zygotes of mutants defective in the functions of Jem1p or Sec63p contain two haploid nuclei that were closely apposed but failed to fuse. Here we analyzed the ultrastructure of nuclei in jem1 Delta and sec71 Delta mutant zygotes using electron microscope with the freeze-substituted fixation method. Three-dimensional reconstitution of nuclear structures from electron microscope serial sections revealed that Jem1p facilitates nuclear inner-membrane fusion and spindle pole body (SPB) fusion while Sec71p facilitates nuclear outer-membrane fusion. Two haploid SPBs that failed to fuse could duplicate, and mitotic nuclear division of the unfused haploid nuclei started in jem1 Delta and sec71 Delta mutant zygotes. This observation suggests that nuclear inner-membrane fusion is required for SPB fusion, but not for SPB duplication in the first mitotic cell division.

  4. Regulation of mitosis by the NIMA kinase involves TINA and its newly discovered partner, An-WDR8, at spindle pole bodies

    Science.gov (United States)

    Shen, Kuo-Fang; Osmani, Stephen A.

    2013-01-01

    The NIMA kinase is required for mitotic nuclear pore complex disassembly and potentially controls other mitotic-specific events. To investigate this possibility, we imaged NIMA–green fluorescent protein (GFP) using four-dimensional spinning disk confocal microscopy. At mitosis NIMA-GFP locates to spindle pole bodies (SPBs), which contain Cdk1/cyclin B, followed by Aurora, TINA, and the BimC kinesin. NIMA promotes NPC disassembly in a spatially regulated manner starting near SPBs. NIMA is also required for TINA, a NIMA-interacting protein, to locate to SPBs during initiation of mitosis, and TINA is then necessary for locating NIMA back to SPBs during mitotic progression. To help expand the NIMA-TINA pathway, we affinity purified TINA and found it to uniquely copurify with An-WDR8, a WD40-domain protein conserved from humans to plants. Like TINA, An-WDR8 accumulates within nuclei during G2 but disperses from nuclei before locating to mitotic SPBs. Without An-WDR8, TINA levels are greatly reduced, whereas TINA is necessary for mitotic targeting of An-WDR8. Finally, we show that TINA is required to anchor mitotic microtubules to SPBs and, in combination with An-WDR8, for successful mitosis. The findings provide new insights into SPB targeting and indicate that the mitotic microtubule-anchoring system at SPBs involves WDR8 in complex with TINA. PMID:24152731

  5. Effects of exercise training experience on hand grip strength, body composition and postural stability in fitness pole dancers.

    Science.gov (United States)

    Nawrocka, Agnieszka; Mynarski, Arkadiusz; Powerska, Aneta; Rozpara, Michał; Garbaciak, Wiesław

    2017-09-01

    Although the growing popularity of pole dance as a leisure-time activity of people of all ages, the problem of physical effects of exercise on the pole is not considered in the scientific literature. The aim of this study was to evaluate and compare the hand grip strength, body composition and postural stability of fitness pole dancers with different training experience. The inclusion criteria for this study were met by 52 female pole dancers. The research program included assessment of body composition (using BC-418 Segmental Body Composition Analyzer, Tanita, Tokyo, Japan), hand grip strength by hydraulic dynamometer JAMAR, and postural stability using ALFA stabilometric platform. Significant differences depending on the pole dance advancement level were found in postural stability and hand-grip strength. The average values of the surface area and the length sway indicated by feet center of pressure were significantly decreasing with the increasing group experience (PStrength level was increasing with the consecutive advancement level (right hand χ2=9.595, P=0.008, left hand χ2=8.936, P=0.011). Regular practice of pole dance fitness can contribute to a significant increase of strength and improvement of the postural stability, which is important for the entire musculoskeletal system. However, further studies on the beneficial and negative (e.g. injuries) impact of exercises on the pole on the musculoskeletal system are required, including larger group of respondents, their diverse age and, above all, longitudinal studies.

  6. "I Kinda Feel Like Wonder Woman": An Interpretative Phenomenological Analysis of Pole Fitness and Positive Body Image.

    Science.gov (United States)

    Dimler, Ariel J; McFadden, Kimberley; McHugh, Tara-Leigh F

    2017-10-01

    The purpose of this research was to describe and interpret the positive body image experiences of women actively engaged in pole fitness. A total of seven women between the ages of 20 and 36 years participated in semistructured one-on-one interviews and follow-up interviews. Participant observation was also used to generate data. Data were analyzed using an interpretative phenomenological analysis approach, and the positive body image experiences of women are represented by five themes: (a) observation and exposure fostering body acceptance, (b) performance promoting self-confidence, (c) personal growth and sexual expression, (d) unconditional community support creates comfort, and (e) body appreciation through physical skill development. Findings suggest that women engaging in pole fitness may experience positive body image, and the words of participants provide insight into the components of pole fitness that may foster positive body image. Pole fitness may provide a unique exercise context whereby women can develop and maintain positive body image.

  7. Person perception involves functional integration between the extrastriate body area and temporal pole.

    Science.gov (United States)

    Greven, Inez M; Ramsey, Richard

    2017-02-01

    The majority of human neuroscience research has focussed on understanding functional organisation within segregated patches of cortex. The ventral visual stream has been associated with the detection of physical features such as faces and body parts, whereas the theory-of-mind network has been associated with making inferences about mental states and underlying character, such as whether someone is friendly, selfish, or generous. To date, however, it is largely unknown how such distinct processing components integrate neural signals. Using functional magnetic resonance imaging and connectivity analyses, we investigated the contribution of functional integration to social perception. During scanning, participants observed bodies that had previously been associated with trait-based or neutral information. Additionally, we independently localised the body perception and theory-of-mind networks. We demonstrate that when observing someone who cues the recall of stored social knowledge compared to non-social knowledge, a node in the ventral visual stream (extrastriate body area) shows greater coupling with part of the theory-of-mind network (temporal pole). These results show that functional connections provide an interface between perceptual and inferential processing components, thus providing neurobiological evidence that supports the view that understanding the visual environment involves interplay between conceptual knowledge and perceptual processing. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. SPB stars in the open SMC cluster NGC 371

    Science.gov (United States)

    Karoff, C.; Arentoft, T.; Glowienka, L.; Coutures, C.; Nielsen, T. B.; Dogan, G.; Grundahl, F.; Kjeldsen, H.

    2008-05-01

    Pulsation in β Cep and slowly pulsating B (SPB) stars are driven by the κ mechanism which depends critically on the metallicity. It has therefore been suggested that β Cep and SPB stars should be rare in the Magellanic Clouds which have lower metallicities than the solar neighbourhood. To test this prediction we have observed the open Small Magellanic Cloud (SMC) cluster NGC 371 for 12 nights in order to search for β Cep and SPB stars. Surprisingly, we find 29 short-period B-type variables in the upper part of the main sequence, many of which are probably SPB stars. This result indicates that pulsation is still driven by the κ mechanism even in low-metallicity environments. All the identified variables have periods longer than the fundamental radial period which means that they cannot be β Cep stars. Within an amplitude detection limit of 5 mmag no stars in the top of the Hertzsprung-Russell diagram show variability with periods shorter than the fundamental radial period. So if β Cep stars are present in the cluster they oscillate with amplitudes below 5 mmag, which is significantly lower than the mean amplitude of β Cep stars in the Galaxy. We see evidence that multimode pulsation is more common in the upper part of the main sequence than in the lower. We have also identified five eclipsing binaries and three periodic pulsating Be stars in the cluster field.

  9. New paleomagnetic pole from Precambrian magmatic bodies of the Kotuy river basin (northwestern part of the Siberian platform)

    Science.gov (United States)

    Veselovskiy, R.; Pavlov, V.

    2009-04-01

    Apparent polar wander paths are powerful means for deciphering of tectonic history of the Earth lithosphere and its structural elements. At the same time APWP's can be used as a tool for dating of different geological events and objects. Importance of APWP's especially increases when dealing with Precambrian where possibilities of many other methods of dating become limited. Whereas Proterozoic APWP's of North American, East European and Australian ancient platforms are more or less developed, Siberian Apparent Polar Wander Path is at the first stage of its elaboration. Proterozoic and, especially, Meso- and Paleoproterozoic paleomagnetic poles are scarce and for long time intervals are practically absent. Thus every new reliable Siberian paleomagnetic pole of Proterozoic age is of paramount importance for elaboration of Proterozoic APWP of the Siberian platform. To obtain such the pole we have carried out paleomagnetic investigation of Late Precambrian magmatic complex of northwestern part of the Anabar Uplift (Siberian platform). In total, six dolerite subvolcanic intrusions (dykes and sills) exposed along the Kotuy, Kotuykan and Djogdjo rivers have been studied. Clear paleomagnetic record was found in 5 intrusions. Thermal demagnetization isolates two magnetic components. The first of them is parallel to the recent geomagnetic field at the site and is removed in the low to middle temperature range. The second one (HTC) is isolated at higher temperatures (up to 600°C) and has dual magnetic polarities. Intrusions means form relatively tight cluster, which average direction corresponds to paleomagnetic poles with coordinates: Plat=-23.4°N, Plong=70.0°E, dp/dm = 3.4°/6.7°. Two polarity distribution of HTC vectors, no resemblance to paleomagnetic poles of younger age, and relative proximity to poles of close age (Ernst et al., 2000; Veselovskiy et al., 2006, 2009) - all these allow us to consider the paleomagnetic pole as reflecting the direction of geomagnetic

  10. 18th International Conference PhysicA.SPb

    International Nuclear Information System (INIS)

    2016-01-01

    The eighteenth International Conference PhysicA.SPb was held 26-29 October 2015 in Saint- Petersburg, Russia. The Conference continues the tradition of Saint-Petersburg Seminars on Physics and Astronomy originating from mid-90s. Since then PhysicA.SPb maintains both the scientific and educational quality of contributions delivered to the young audience. This is the main feature of the Conference that makes it possible to combine the whole spectrum of modern Physics and Astronomy within one event. PhysicA.SPb/2015 has brought together about 300 students, young scientists and their colleague professors from many universities and research institutes across the whole of Russia as well as from Belarus, Ukraine, Finland, Netherlands, Iceland, and France. Oral and poster presentations were combined into well-defined sections among which one should name Astronomy and Astrophysics, Optics and spectroscopy, Atomic and elementary particles physics, Physics of ferroics, Nanostructured and thin-film materials, Mathematical physics and numerical methods, THz and UHF materials and devices, Biophysics, Optoelectronic devices, Surface effects, Physics and technology of energy conversion, Plasma physics, hydro- and aero-dynamics, and Physics of quantum structures. This issue of the Journal of Physics: Conference Series presents the extended contributions from participants of PhysicA.SPb/2015 that were peer-reviewed by expert referees through processes administered by the Presiders of the Organising and Programme Committees to the best professional and scientific standards. This was made possible by the efforts of the Sectional Editors of this Issue: Prof. Petr Arseev (Lebedev Physical Institute), Prof. Yuri Kusraev (Ioffe Institute), Prof. Alexander Ivanchik (Ioffe Institute), Prof. Polina Ryabochkina (Ogarev Mordova State University), Dr. Karina Litvinova (Aston University), Dr. Nikolay Bert (Ioffe Institute), Dr. Yana Kuznetsova (Ioffe Institute), Dr. Prokhor Alekseev (Ioffe

  11. Upper-Body Muscular Endurance Training Improves Performance Following 50 min of Double Poling in Well-Trained Cross-Country Skiers.

    Science.gov (United States)

    Børve, Jørgen; Jevne, Steffen N; Rud, Bjarne; Losnegard, Thomas

    2017-01-01

    This study investigated the effect of muscular endurance training on O 2 -cost and performance in double poling (DP) on a rollerski treadmill. Twenty-two well-trained cross-country skiers (31 ± 4 years, 77 ± 9 kg, 181 ± 8 cm, VO 2max running: 64 ± 5 mL·kg -1 ·min -1 ) were counter-balanced to either a combined muscular endurance and running interval training group [MET; n = 11 (♂ = 9, ♀ = 2)], or an endurance running interval training group [ET; n = 11 (♂ = 9, ♀ = 2)]. Both groups continued their normal low-and moderate intensity training, but replaced 2 weekly high intensity-training sessions with two project-specific sessions for 6 weeks. In these sessions, MET combined upper-body muscular endurance training (4 × 30 repetitions, 90 s rest between sets) and running intervals (3 × 4 or 2 × 6 min, 3 min rest), while ET performed running intervals only (6 × 4 or 4 × 6 min, 3 min rest). The DP test-protocol consisted of 50 min submaximal poling for O 2 -cost measurement, followed by a self-paced 1,000-m performance test. In addition, subjects performed a VO 2max test in running. MET increased muscular endurance ( P training increased both muscular endurance and 1RM in simulated DP. Further, specific upper-body muscular endurance training improved DP performance and thus, seems as a promising training model to optimize performance in well-trained cross-country skiers.

  12. Synthetic surfactant based on analogues of SP-B and SP-C is superior to single-peptide surfactants in ventilated premature rabbits.

    Science.gov (United States)

    Almlén, Andreas; Walther, Frans J; Waring, Alan J; Robertson, Bengt; Johansson, Jan; Curstedt, Tore

    2010-06-01

    Respiratory distress syndrome (RDS) is currently treated with surfactant preparations obtained from natural sources and attempts to develop equally active synthetic surfactants have been unsuccessful. One difference in composition is that naturally derived surfactants contain the two hydrophobic proteins SP-B and SP-C while synthetic preparations contain analogues of either SP-B or SP-C. It was recently shown that both SP-B and SP-C (or SP-C33, an SP-C analogue) are necessary to establish alveolar stability at end-expiration in a rabbit RDS model, as reflected by high lung gas volumes without application of positive end-expiratory pressure. To study the efficacy of fully synthetic surfactants containing analogues of both SP-B and SP-C compared to surfactants with only one protein analogue. Premature newborn rabbits, treated with synthetic surfactants, were ventilated for 30 min without positive end-expiratory pressure. Tidal volumes as well as lung gas volumes at end-expiration were determined. Treatment with 2% Mini-B (a short-cut version of SP-B) and 2% SP-C33, or its C-terminally truncated form SP-C30, in 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol, 68:31 (w/w) resulted in median lung gas volumes of 8-9 ml/kg body weight, while animals treated with 2% Mini-B surfactant or 2% SP-C33/SP-C30 surfactant had lung gas volumes of 3-4 ml/kg, and those treated with Curosurf, a porcine surfactant, 15-17 ml/kg. In contrast, mixing SP-C33 with peptides with different distributions of positively charged and hydrophobic residues did not improve lung gas volumes. The data indicate that synthetic surfactants containing analogues of both SP-B and SP-C might be superior to single-peptide surfactants in the treatment of RDS.

  13. Characterization of cells resistant to the potent histone deacetylase inhibitor spiruchostatin B (SP-B) and effect of overexpressed p21waf1/cip1 on the SP-B resistance or susceptibility of human leukemia cells.

    Science.gov (United States)

    Kanno, Syu-Ichi; Maeda, Naoyuki; Tomizawa, Ayako; Yomogida, Shin; Katoh, Tadashi; Ishikawa, Masaaki

    2012-09-01

    We previously showed that the B cell leukemia cell line NALM-6 had the highest susceptibility among a number of leukemia cell lines to spiruchostatin B (SP-B), a potent histone deacetylase (HDAC) inhibitor. We also showed that SP-B-induced cytotoxicity depended on induction of apoptosis that was mediated by p21waf1/cip1 expression. In the present study, we generated and characterized a stable, SP-B-resistant NALM-6 cell line (NALM-6/SP-B) by continuous exposure to SP-B, starting with a low SP-B concentration. NALM-6/SP-B cells were also more resistant to FK228, which has a similar chemical structure to SP-B, and were slightly more resistant to the P-gp substrates doxorubicin and vincristine than parental cells, but displayed similar susceptibility to other HDAC inhibitors and to paclitaxel as the parental cells. There was little change in the basal mRNA expression of HDAC1, p53, Bax, Bcl-2, Fas, caspase-3, c-Myc and MDR1 in NALM-6/SP-B compared to parental cells, but the mRNA expression of p21waf1/cip1 was decreased. The introduction of an exogenous p21waf1/cip1 expression vector restored SP-B induction of NALM-6/SP-B cell apoptosis. Moreover, overexpressed p21waf1/cip1 enhanced SP-B induction of the apoptosis of the human erythroleukemia leukemia cell line K562 which is less susceptible to SP-B than NALM-6 cells. These results suggest that downregulation of p21waf1/cip1, which is a characteristic feature of NALM-6/SP-B cells, was important for their resistance to SP-B, and that this SP-B resistance could be overcome by the introduction of exogenous p21waf1/cip1. Furthermore, introduction of p21waf1/cip1 to other leukemia cells such as K562 may enhance their susceptibility to SP-B. This is the first report of the characterization of SP-B-resistant cells and of the effect of overexpressed p21waf1/cip1 on the resistance or susceptibility of human leukemia cells to SP-B.

  14. Magnet pole tips

    Science.gov (United States)

    Thorn, Craig E.; Chasman, Chellis; Baltz, Anthony J.

    1984-04-24

    An improved magnet which more easily provides a radially increasing magnetic field, as well as reduced fringe field and requires less power for a given field intensity. The subject invention comprises a pair of spaced, opposed magnetic poles which further comprise a pair of pole roots, each having a pole tip attached to its center. The pole tips define the gap between the magnetic poles and at least a portion of each pole tip is separated from its associated pole root. The separation begins at a predetermined distance from the center of the pole root and increases with increasing radial distance while being constant with azimuth within that portion. Magnets in accordance with the subject invention have been found to be particularly advantageous for use in large isochronous cyclotrons.

  15. Comparison of Peak Oxygen Uptake and Test-Retest Reliability of Physiological Parameters between Closed-End and Incremental Upper-Body Poling Tests

    Directory of Open Access Journals (Sweden)

    Julia K. Baumgart

    2017-10-01

    Full Text Available Objective: To compare peak oxygen uptake (VO2peak and the test-retest reliability of physiological parameters between a 1-min and a 3-min closed-end and an incremental open-end upper-body poling test.Methods: On two separate test days, 24 healthy, upper-body trained men (age: 28.3 ± 9.3 years, body mass: 77.4 ± 8.9 kg, height: 182 ± 7 cm performed a 1-min, a 3-min and an incremental test to volitional exhaustion in the same random order. Respiratory parameters, heart rate (HR, blood lactate concentration (BLa, rating of perceived exertion (RPE, and power output were measured. VO2peak was determined as the single highest 30-s average. Relative reliability was assessed with the intra-class correlation coefficient (ICC2, 1 and absolute reliability with the standard error of measurement (SEM and smallest detectable change (SDC.Results: The incremental (3.50 ± 0.46 L·min−1 and 45.4 ± 5.5 mL·kg−1·min−1 and the 3-min test (3.42 ± 0.47 L·min−1 and 44.5 ± 5.5 mL·kg−1·min−1 resulted in significantly higher absolute and body-mass normalized VO2peak compared to the 1-min test (3.13 ± 0.40 L·min−1 and 40.4 ± 5.0 mL·kg−1·min−1 (all comparisons, p < 0.001. Furthermore, the incremental test resulted in a significantly higher VO2peak as compared to the 3-min test (p < 0.001. VO2peak was significantly higher on day 1 than day 2 for the 1-min test (p < 0.05 and displayed a trend toward higher values on day 2 for the incremental test (p = 0.07. High and very high ICCs across all physiological parameters were found for the 1-min (0.827–0.956, the 3-min (0.916–0.949, and the incremental test (0.728–0.956. The SDC was consistently small for HR (1-min: 4%, 3-min: 4%, incremental: 3%, moderate for absolute and body-mass normalized VO2peak (1-min: 5%, 3-min: 6%, incremental: 7% and large for BLa (1-min: 20%, 3-min: 12%, incremental: 22%.Conclusions: Whereas both the 3-min and the incremental test display high relative reliability

  16. Rotor pole refurbishment for hydrogenerators: insulation problems and solutions

    International Nuclear Information System (INIS)

    Reynolds, R.R.; Rux, L.

    2005-01-01

    Rotor poles for Unit 1 at Lower Granite Powerhouse were removed from the rotor and shipped to a repair facility for refurbishment. Upon inspection, it was found that all of the pole bodies exhibited a distinct bow, center to end, on the pole mounting surface. In some cases, the deflection was as much as 0.106 inch. Concerns were raised about how this condition might affect the ability to properly insulate and/or re-seat the poles. This paper presents details of the rotor pole and field winding evaluation, the problems encountered, and the solutions implemented to successfully refurbish the rotor poles and field winding. (author)

  17. Poling of Planar Silica Waveguides

    DEFF Research Database (Denmark)

    Arentoft, Jesper; Kristensen, Martin; Jensen, Jesper Bo

    1999-01-01

    UV-written planar silica waveguides are poled using two different poling techniques, thermal poling and UV-poling. Thermal poling induces an electro-optic coefficient of 0.067 pm/V. We also demonstrate simultaneous UV-writing and UV-poling. The induced electro-optic effect shows a linear dependence...

  18. PREFACE: 16th Russian Youth Conference on Physics and Astronomy (PhysicA.SPb/2013)

    Science.gov (United States)

    2014-12-01

    The sixteenth Russian Conference on Physics and Astronomy PhysicA.SPb was held 23-24 October 2013 in Saint-Petersburg, Russia. The Conference continues the tradition of Saint-Petersburg Seminars on Physics and Astronomy originating from mid-90s. Since then PhysicA.SPb maintains both scientific and educational quality of contributions delivered to the young audience. This is the main feature of the Conference that makes it possible to combine the whole spectrum of modern Physics and Astronomy within one event. PhysicA.SPb/2013 has brought together about 200 students, young scientists and their colleague professors from many universities and research institutes across whole Russia as well as from Belarus, Ukraine, Switzerland, Turkey, Finland and France. Oral and poster presentations were combined into a few well-defined sections among which one should name Astronomy and Astrophysics, Plasma physics, hydro- and aero-dynamics, Physics of quantum-sized structures, Nanostructured and thin-film materials, Biophysics, THz and UHF materials and devices, Optoelectronic devices, Optics and spectroscopy, Atomic and elementary particles physics, Defects and impurities in solid state, Physics and technology of the alternative energetics. This issue of the Journal of Physics: Conference Series presents the extended contributions from participants of PhysicA.SPb/2013 that were peer-reviewed by expert referees through processes administered by the Presiders of the Organising and Programme Committees to the best professional and scientific standards. The Editors: Nikita S. Averkiev, Sergey A. Poniaev and Grigorii S. Sokolovskii

  19. V, Cr, and Mn in the Earth, Moon, EPB, and SPB and the origin of the Moon: Experimental studies

    International Nuclear Information System (INIS)

    Drake, M.J.; Capobianco, C.J.; Newsom, H.E.

    1989-01-01

    The abundances of V, Cr, and Mn inferred for the mantles of the Earth and Moon decrease in that order and are similar, but are distinct from those inferred for the mantles of the Eucrite Parent Body (EPB) and Shergottite Parent Body (SPB). This similarity between Earth and Moon has been used to suggest that the Moon is derived substantially or entirely from Earth mantle material following terrestrial core formation. To test this hypothesis, the authors have determined the partitioning of V, Cr, and Mn between solid iron metal, S-rich metallic liquid, and synthetic basaltic silicate liquid at 1,260 degree C and one bar pressure. The sequence of compatibility in the metallic phases is Cr > V > Mn at high oxygen fugacity and V > Cr > Mn at low oxygen fugacities. Solubilities in liquid metal always exceed solubilities in solid metal. These partition coefficients suggest that the abundances of V, Cr, and Mn do not reflect core formation in the Earth. Rather, they are consistent with the relative volatilities of these elements. The similarity in the depletion patterns of V, Cr, and Mn inferred for the mantles of the Earth and Moon is a necessary, but not sufficient, condition for the Moon to have been derived wholly or in part from the Earth's mantle

  20. Lower pole stones

    DEFF Research Database (Denmark)

    Sanguedolce, Francesco; Breda, Alberto; Millan, Felix

    2013-01-01

    PURPOSE: To assess efficacy and safety of prone- and supine percutaneous nephrolithotomy (PCNL) for the treatment of lower pole kidney stones. METHODS: Data from patients affected by lower pole kidney stones and treated with PCNL between December 2005 and August 2010 were collected retrospectively...... by seven referral centres. Variables analysed included patient demographics, clinical and surgical characteristics, stone-free rates (SFR) and complications. Statistical analysis was conducted to compare the differences for SFRs and complication rates between prone- and supine PCNL. RESULTS: One hundred...... seventeen patients underwent PCNL (mean stone size: 19.5 mm) for stones harboured only in the lower renal pole (single stone: 53.6 %; multiple stones: 46.4 %). A higher proportion of patients with ASA score ≥ 3 and harbouring multiple lower pole stones were treated with supine PCNL (5.8 vs. 23.1 %; p = 0...

  1. Microbial reduction of [Co(III)-EDTA]⁻ by Bacillus licheniformis SPB-2 strain isolated from a solar salt pan.

    Science.gov (United States)

    Paraneeiswaran, Arunachalam; Shukla, Sudhir K; Prashanth, K; Rao, T Subba

    2015-01-01

    Naturally stressed habitats are known to be repositories for novel microorganisms with potential bioremediation applications. In this study, we isolated a [Co(III)-EDTA](-) reducing bacterium Bacillus licheniformis SPB-2 from a solar salt pan that is exposed to constant cycles of hydration and desiccation in nature. [Co(III)-EDTA](-) generated during nuclear waste management process is difficult to remove from the waste due to its high stability and solubility. It is reduced form i.e. [Co(II)-EDTA](2-) is less stable though it is toxic. This study showed that B. licheniformis SPB-2 reduced 1mM [Co(III)-EDTA](-) in 14 days when grown in a batch mode. However, subsequent cycles showed an increase in the reduction activity, which was observed up to four cycles. Interestingly, the present study also showed that [Co(III)-EDTA](-) acted as an inducer for B. licheniformis SPB-2 spore germination. Vegetative cells germinated from the spores were found to be involved in [Co(III)-EDTA](-) reduction. More detailed investigations showed that after [Co(III)-EDTA](-) reduction, i.e. [Co(II)-EDTA](2-) complex was removed by B. licheniformis SPB-2 from the bulk liquid by adsorption phenomenon. The bacterium showed a D10 value (radiation dose required to kill 90% cells) of ∼250 Gray (Gy), which signifies the potential use of B. licheniformis SPB-2 for bioremediation of moderately active nuclear waste. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Uncovering phenotypes of poor-pitch singing: the Sung Performance Battery (SPB).

    Science.gov (United States)

    Berkowska, Magdalena; Dalla Bella, Simone

    2013-01-01

    Singing is as natural as speaking for humans. Increasing evidence shows that the layman can carry a tune (e.g., when asked to sing a well-known song or to imitate single pitches, intervals and short melodies). Yet, important individual differences exist in the general population with regard to singing proficiency. Some individuals are particularly inaccurate or imprecise in producing or imitating pitch information (poor-pitch singers), thus showing a variety of singing phenotypes. Unfortunately, so far there is not a standard set of tasks for assessing singing proficiency in the general population, allowing to uncover and characterize individual profiles of poor-pitch singing. Different tasks and analysis methods are typically used in various experiments, making the comparison of the results across studies arduous. To fill this gap we propose here a new tool for assessing singing proficiency (the Sung Performance Battery, SPB). The SPB starts from the assessment of participants' vocal range followed by five tasks: (1) single-pitch matching, (2) pitch-interval matching, (3) novel-melody matching, (4) singing from memory of familiar melodies (with lyrics and on a syllable), and (5) singing of familiar melodies (with lyrics and on a syllable) at a slow tempo indicated by a metronome. Data analysis via acoustical methods provides objective measures of pitch accuracy and precision in terms of absolute and relative pitch. The SPB has been tested in a group of 50 occasional singers. The results indicate that the battery is useful for characterizing proficient singing and for detecting cases of inaccurate and/or imprecise singing.

  3. Uncovering phenotypes of poor-pitch singing: The Sung Performance Battery (SPB

    Directory of Open Access Journals (Sweden)

    Magdalena eBerkowska

    2013-10-01

    Full Text Available Singing is as natural as speaking for humans. Increasing evidence shows that the layman can carry a tune (e.g., when asked to sing a well-known song or to imitate single pitches, intervals and short melodies. Yet, important individual differences exist in the general population with regard to singing proficiency. Some individuals are particularly inaccurate or imprecise in producing or imitating pitch information (poor-pitch singers, thus showing a variety of singing phenotypes. Unfortunately, so far there is not a standard set of tasks for assessing singing proficiency in the general population, allowing to uncover and characterize individual profiles of poor-pitch singing. Different tasks and analysis methods are typically used in various experiments, making the comparison of the results across studies arduous. To fill this gap we propose here a new tool for assessing singing proficiency (the Sung Performance Battery, SPB. The SPB starts from the assessment of participants’ vocal range followed by five tasks: 1 single-pitch matching, 2 pitch-interval matching, 3 novel-melody matching, 4 singing from memory of familiar melodies (with lyrics and on a syllable, and 5 singing of familiar melodies (with lyrics and on a syllable at a slow tempo indicated by a metronome. Data analysis via acoustical methods provides objective measures of pitch accuracy and precision in terms of absolute and relative pitch. The SPB has been tested in a group of 50 occasional singers. The results indicate that the battery is useful for characterizing proficient singing and for detecting cases of inaccurate and/or imprecise singing.

  4. Safely Transporting the assembled EUSO-SPB instrument 1000 miles for field testing

    Science.gov (United States)

    Cummings, Austin; Gregg, Rachael; Polonsky, Zach

    2017-01-01

    The EUSO-SPB instrument assembled and tested at Colorado School of Mines and then transported in this state to the Telescope Array site in Delta Utah for field tests. 6 hours after arrival the instrument recorded first light from a laser 20 km distant. We describe the structures and methods that we developed drive this instrument to the test site. The vibration data collected during the 1000 mile round trip and the lessons learned will also be presented. In our experience, there is relatively little quantitative information available about this type of critical operation.

  5. Finite element analyses of wood laminated composite poles

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; R.C. Tang; Chung Y. Hse

    2005-01-01

    Finite element analyses using ANSYS were conducted on orthotropic, polygonal, wood laminated composite poles subjected to a body force and a concentrated load at the free end. Deflections and stress distributions of small-scale and full-size composite poles were analyzed and compared to the results obtained in an experimental study. The predicted deflection for both...

  6. Quantitation of pulmonary surfactant protein SP-B in the absence or presence of phospholipids by enzyme-linked immunosorbent assay

    DEFF Research Database (Denmark)

    Oviedo, J M; Valiño, F; Plasencia, I

    2001-01-01

    We have developed an enzyme-linked immunosorbent assay (ELISA) that uses polyclonal or monoclonal anti-surfactant protein SP-B antibodies to quantitate purified SP-B in chloroform/methanol and in chloroform/methanol extracts of whole pulmonary surfactant at nanogram levels. This method has been...... used to explore the effect of the presence of different phospholipids on the immunoreactivity of SP-B. Both polyclonal and monoclonal antibodies produced reproducible ELISA calibration curves for methanolic SP-B solutions with protein concentrations in the range of 20-1000 ng/mL. At these protein...... pronounced changes on the conformation of SP-B when the solvent was evaporated and dry lipid-protein films were formed, a necessary step to expose protein to antibodies in ELISA. Under these conditions, negatively charged lipids, but not zwitterionic ones, induced a marked decrease on the ellipticity of SP...

  7. Potential application of Bacillus subtilis SPB1 lipopeptides in toothpaste formulation.

    Science.gov (United States)

    Bouassida, Mouna; Fourati, Nada; Krichen, Fatma; Zouari, Raida; Ellouz-Chaabouni, Semia; Ghribi, Dhouha

    2017-07-01

    Toothpaste is a gel dentifrice used with a toothbrush as an accessory to clean, keep and promote oral hygiene. The literature review suggests that there are many different formulations of toothpastes and that each of their individual components present specific functions. The concentration of the toothpaste ingredients must be appropriately chosen taking into account the purposes of the toothpaste. Biosurfactants are considered as suitable molecules for application in many formulations such as in toothpaste one. In the present work, two dentifrice formulations were investigated and their efficiencies were tested using chemical surfactant agent and lipopeptide biosurfactant isolated from Bacillus subtilis SPB1. The physicochemical properties were analyzed considering several tests mainly spreading ability, water activity, pH, foaming and cleaning tests. The obtained results indicated that the SPB1 biosurfactant was as efficient as the chemical surfactant confirming its potential utilization in toothpaste formulation compared to the commercial one. The evaluation of the antimicrobial activity of the formulated dentifrice was carried out against eight bacteria. The results demonstrated that the biosurfactant-based product exhibited an important antimicrobial activity, which was very effective against Enterobacter sp and Salmonella typhinirium.

  8. Potential application of Bacillus subtilis SPB1 lipopeptides in toothpaste formulation

    Directory of Open Access Journals (Sweden)

    Mouna Bouassida

    2017-07-01

    Full Text Available Toothpaste is a gel dentifrice used with a toothbrush as an accessory to clean, keep and promote oral hygiene. The literature review suggests that there are many different formulations of toothpastes and that each of their individual components present specific functions. The concentration of the toothpaste ingredients must be appropriately chosen taking into account the purposes of the toothpaste. Biosurfactants are considered as suitable molecules for application in many formulations such as in toothpaste one. In the present work, two dentifrice formulations were investigated and their efficiencies were tested using chemical surfactant agent and lipopeptide biosurfactant isolated from Bacillus subtilis SPB1. The physicochemical properties were analyzed considering several tests mainly spreading ability, water activity, pH, foaming and cleaning tests. The obtained results indicated that the SPB1 biosurfactant was as efficient as the chemical surfactant confirming its potential utilization in toothpaste formulation compared to the commercial one. The evaluation of the antimicrobial activity of the formulated dentifrice was carried out against eight bacteria. The results demonstrated that the biosurfactant-based product exhibited an important antimicrobial activity, which was very effective against Enterobacter sp and Salmonella typhinirium.

  9. Field testing for extreme universe space observatory aboard a super pressure balloon (EUSO-SPB): Logistics and first results

    Science.gov (United States)

    Cummings, Austin

    Extreme Universe Space Observatory aboard a Super Pressure Balloon (EUSO-SPB) is a prototype cosmic ray detector that will, for the first time, record cosmic rays from above. It is planned to fly for nearly 100 days at an altitude of 33 km, looking downward onto Earth's atmosphere, and measure the ultraviolet light emitted by ultra-high energy cosmic ray extensive air showers. It is the primary scientific payload aboard the 2017 NASA super pressure balloon flight launched from Wanaka, NZ. It was necessary to perform an end-to-end characterization of the instrument, as post test recovery is not guaranteed. A laser underflight study for EUSO-SPB is planned to occur to evaluate the assembled instrument's response to realistic optical tracks. In case of failure, it was necessary to conduct ground-to-ground testing, where laser test beams at "flight-like" distances through Earth's atmosphere would be provided. The Black Rock Mesa (BRM) Telescope Array (TA) test site in Delta, Utah was chosen as the location for the instrument field testing. The assembled and working EUSO-SPB instrument was transported using a ground loading, weather-sealed, air-suspension trailer and a custom "vibration-proof" dolly. During transportation, the maximum acceleration experienced by the instrument was 1.2 g's. Test beams were provided by a fixed energy, vertical laser at 21 km and by a steerable, variable energy, laser at 24 km. Hundreds of thousands of pulsed, UV laser shots were successfully recorded during the six nights of operation, with various energies, directions, and triggering methods. Energy sweeps were performed with a 45° tilted away laser at 24 km to determine the nominal energy threshold of EUSO-SPB in a balloon simulated geometry for two different lens configurations. First results show that the 2 lens configuration of EUSO-SPB was approximately twice as sensitive as the 3 lens configuration to laser light, with 50% energy thresholds of 1 mj and 2 mj, respectively. Cloud

  10. pbx is required for pole and eye regeneration in planarians.

    Science.gov (United States)

    Chen, Chun-Chieh G; Wang, Irving E; Reddien, Peter W

    2013-02-01

    Planarian regeneration involves regionalized gene expression that specifies the body plan. After amputation, planarians are capable of regenerating new anterior and posterior poles, as well as tissues polarized along the anterior-posterior, dorsal-ventral and medial-lateral axes. Wnt and several Hox genes are expressed at the posterior pole, whereas Wnt inhibitory genes, Fgf inhibitory genes, and prep, which encodes a TALE-family homeodomain protein, are expressed at the anterior pole. We found that Smed-pbx (pbx for short), which encodes a second planarian TALE-family homeodomain transcription factor, is required for restored expression of these genes at anterior and posterior poles during regeneration. Moreover, pbx(RNAi) animals gradually lose pole gene expression during homeostasis. By contrast, pbx was not required for initial anterior-posterior polarized responses to wounds, indicating that pbx is required after wound responses for development and maintenance of poles during regeneration and homeostatic tissue turnover. Independently of the requirement for pbx in pole regeneration, pbx is required for eye precursor formation and, consequently, eye regeneration and eye replacement in homeostasis. Together, these data indicate that pbx promotes pole formation of body axes and formation of regenerative progenitors for eyes.

  11. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  12. Synergistic Effect of Caffeine and Glucocorticoids on Expression of Surfactant Protein B (SP-B) mRNA

    Science.gov (United States)

    Fehrholz, Markus; Bersani, Iliana; Kramer, Boris W.; Speer, Christian P.; Kunzmann, Steffen

    2012-01-01

    Administration of glucocorticoids and caffeine is a common therapeutic intervention in the neonatal period, but possible interactions between these substances are still unclear. The present study investigated the effect of caffeine and different glucocorticoids on expression of surfactant protein (SP)-B, crucial for the physiological function of pulmonary surfactant. We measured expression levels of SP-B, various SP-B transcription factors including erythroblastic leukemia viral oncogene homolog 4 (ErbB4) and thyroid transcription factor-1 (TTF-1), as well as the glucocorticoid receptor (GR) after administering different doses of glucocorticoids, caffeine, cAMP, or the phosphodiesterase-4 inhibitor rolipram in the human airway epithelial cell line NCI-H441. Administration of dexamethasone (1 µM) or caffeine (5 mM) stimulated SP-B mRNA expression with a maximal of 38.8±11.1-fold and 5.2±1.4-fold increase, respectively. Synergistic induction was achieved after co-administration of dexamethasone (1 mM) in combination with caffeine (10 mM) (206±59.7-fold increase, pglucocorticoids and caffeine, achieved by accumulation of intracellular cAMP. This effect was mediated by a caffeine-dependent phosphodiesterase inhibition and by upregulation of both ErbB4 and the GR. These results suggested that caffeine is able to induce the expression of SP-transcription factors and affects the signaling pathways of glucocorticoids, amplifying their effects. Co-administration of caffeine and corticosteroids may therefore be of benefit in surfactant homeostasis. PMID:23272120

  13. The South Pole Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ruhl, J.E.; Ade, P.A.R.; Carlstrom, J.E.; Cho, H.M.; Crawford,T.; Dobbs, M.; Greer, C.H.; Halverson, N.W.; Holzapfel, W.L.; Lanting,T.M.; Lee, A.T.; Leitch, E.M.; Leong, J.; Lu, W.; Lueker, M.; Mehl, J.; Meyer, S.S.; Mohr, J.J.; Padin, S.; Plagge, T.; Pryke, C.; Runyan, M.C.; Schwan, D.; Sharp, M.K.; Spieler, H.; Staniszewski, Z.; Stark, A.A.

    2004-11-04

    A new 10 meter diameter telescope is being constructed for deployment at the NSF South Pole research station. The telescope is designed for conducting large-area millimeter and sub-millimeter wave surveys of faint, low contrast emission, as required to map primary and secondary anisotropies in the cosmic microwave background. To achieve the required sensitivity and resolution, the telescope design employs an off-axis primary with a 10 m diameter clear aperture. The full aperture and the associated optics will have a combined surface accuracy of better than 20 microns rms to allow precision operation in the submillimeter atmospheric windows. The telescope will be surrounded with a large reflecting ground screen to reduce sensitivity to thermal emission from the ground and local interference. The optics of the telescope will support a square degree field of view at 2mm wavelength and will feed a new 1000-element micro-lithographed planar bolometric array with superconducting transition-edge sensors and frequency-multiplexed readouts. The first key project will be to conduct a survey over 4000 degrees for galaxy clusters using the Sunyaev-Zeldovich Effect. This survey should find many thousands of clusters with a mass selection criteria that is remarkably uniform with redshift. Armed with redshifts obtained from optical and infrared follow-up observations, it is expected that the survey will enable significant constraints to be placed on the equation of state of the dark energy.

  14. Surfactant proteins SP-B and SP-C and their precursors in bronchoalveolar lavages from children with acute and chronic inflammatory airway disease

    Directory of Open Access Journals (Sweden)

    Winter Tobias

    2008-04-01

    Full Text Available Abstract Background The surfactant proteins B (SP-B and C (SP-C are important for the stability and function of the alveolar surfactant film. Their involvement and down-regulation in inflammatory processes has recently been proposed, but their level during neutrophilic human airway diseases are not yet known. Methods We used 1D-electrophoresis and Western blotting to determine the concentrations and molecular forms of SP-B and SP-C in bronchoalveolar lavage (BAL fluid of children with different inflammatory airway diseases. 21 children with cystic fibrosis, 15 with chronic bronchitis and 14 with pneumonia were included and compared to 14 healthy control children. Results SP-B was detected in BAL of all 64 patients, whereas SP-C was found in BAL of all but 3 children; those three BAL fluids had more than 80% neutrophils, and in two patients, who were re-lavaged later, SP-C was then present and the neutrophil count was lower. SP-B was mainly present as a dimer, SP-C as a monomer. For both qualitative and quantitative measures of SP-C and SP-B, no significant differences were observed between the four evaluated patient groups. Conclusion Concentration or molecular form of SP-B and SP-C is not altered in BAL of children with different acute and chronic inflammatory lung diseases. We conclude that there is no down-regulation of SP-B and SP-C at the protein level in inflammatory processes of neutrophilic airway disease.

  15. Surfactant proteins SP-B and SP-C and their precursors in bronchoalveolar lavages from children with acute and chronic inflammatory airway disease.

    Science.gov (United States)

    Tafel, Oliver; Latzin, Philipp; Paul, Karl; Winter, Tobias; Woischnik, Markus; Griese, Matthias

    2008-04-11

    The surfactant proteins B (SP-B) and C (SP-C) are important for the stability and function of the alveolar surfactant film. Their involvement and down-regulation in inflammatory processes has recently been proposed, but their level during neutrophilic human airway diseases are not yet known. We used 1D-electrophoresis and Western blotting to determine the concentrations and molecular forms of SP-B and SP-C in bronchoalveolar lavage (BAL) fluid of children with different inflammatory airway diseases. 21 children with cystic fibrosis, 15 with chronic bronchitis and 14 with pneumonia were included and compared to 14 healthy control children. SP-B was detected in BAL of all 64 patients, whereas SP-C was found in BAL of all but 3 children; those three BAL fluids had more than 80% neutrophils, and in two patients, who were re-lavaged later, SP-C was then present and the neutrophil count was lower. SP-B was mainly present as a dimer, SP-C as a monomer. For both qualitative and quantitative measures of SP-C and SP-B, no significant differences were observed between the four evaluated patient groups. Concentration or molecular form of SP-B and SP-C is not altered in BAL of children with different acute and chronic inflammatory lung diseases. We conclude that there is no down-regulation of SP-B and SP-C at the protein level in inflammatory processes of neutrophilic airway disease.

  16. Microbial reduction of [Co(III)–EDTA]− by Bacillus licheniformis SPB-2 strain isolated from a solar salt pan

    International Nuclear Information System (INIS)

    Paraneeiswaran, Arunachalam; Shukla, Sudhir K.; Prashanth, K.; Rao, T. Subba

    2015-01-01

    Graphical abstract: - Highlights: • Bacillus licheniformis SPB-2 was used in the bioremediation of [Co(III)–EDTA] − . • The bacterial biomass adsorbed the Co–EDTA complex after its reduction. • [Co(III)–EDTA] − complex showed Bacillus spore inducing property. • B. licheniformis SPB-2 showed significantly radio-tolerance (D 10 = 250 Gy). - Abstract: Naturally stressed habitats are known to be repositories for novel microorganisms with potential bioremediation applications. In this study, we isolated a [Co(III)–EDTA] − reducing bacterium Bacillus licheniformis SPB-2 from a solar salt pan that is exposed to constant cycles of hydration and desiccation in nature. [Co(III)–EDTA] − generated during nuclear waste management process is difficult to remove from the waste due to its high stability and solubility. It is reduced form i.e. [Co(II)–EDTA] 2− is less stable though it is toxic. This study showed that B. licheniformis SPB-2 reduced 1 mM [Co(III)–EDTA] − in 14 days when grown in a batch mode. However, subsequent cycles showed an increase in the reduction activity, which was observed up to four cycles. Interestingly, the present study also showed that [Co(III)–EDTA] − acted as an inducer for B. licheniformis SPB-2 spore germination. Vegetative cells germinated from the spores were found to be involved in [Co(III)–EDTA] − reduction. More detailed investigations showed that after [Co(III)–EDTA] − reduction, i.e. [Co(II)–EDTA] 2− complex was removed by B. licheniformis SPB-2 from the bulk liquid by adsorption phenomenon. The bacterium showed a D 10 value (radiation dose required to kill 90% cells) of ∼250 Gray (Gy), which signifies the potential use of B. licheniformis SPB-2 for bioremediation of moderately active nuclear waste

  17. Microbial reduction of [Co(III)–EDTA]{sup −} by Bacillus licheniformis SPB-2 strain isolated from a solar salt pan

    Energy Technology Data Exchange (ETDEWEB)

    Paraneeiswaran, Arunachalam [Departartment of Biotechnology, Pondicherry University, Puducherry (India); Shukla, Sudhir K. [Biofouling and Biofilm Processes Section, Water and Steam Chemistry Division, BARC Facilities, Kalpakkam 603102 (India); Homi Bhabha National Institute, Mumbai 400094 (India); Prashanth, K. [Departartment of Biotechnology, Pondicherry University, Puducherry (India); Rao, T. Subba, E-mail: subbarao@igcar.gov.in [Biofouling and Biofilm Processes Section, Water and Steam Chemistry Division, BARC Facilities, Kalpakkam 603102 (India); Homi Bhabha National Institute, Mumbai 400094 (India)

    2015-02-11

    Graphical abstract: - Highlights: • Bacillus licheniformis SPB-2 was used in the bioremediation of [Co(III)–EDTA]{sup −}. • The bacterial biomass adsorbed the Co–EDTA complex after its reduction. • [Co(III)–EDTA]{sup −} complex showed Bacillus spore inducing property. • B. licheniformis SPB-2 showed significantly radio-tolerance (D{sub 10} = 250 Gy). - Abstract: Naturally stressed habitats are known to be repositories for novel microorganisms with potential bioremediation applications. In this study, we isolated a [Co(III)–EDTA]{sup −} reducing bacterium Bacillus licheniformis SPB-2 from a solar salt pan that is exposed to constant cycles of hydration and desiccation in nature. [Co(III)–EDTA]{sup −} generated during nuclear waste management process is difficult to remove from the waste due to its high stability and solubility. It is reduced form i.e. [Co(II)–EDTA]{sup 2−} is less stable though it is toxic. This study showed that B. licheniformis SPB-2 reduced 1 mM [Co(III)–EDTA]{sup −} in 14 days when grown in a batch mode. However, subsequent cycles showed an increase in the reduction activity, which was observed up to four cycles. Interestingly, the present study also showed that [Co(III)–EDTA]{sup −} acted as an inducer for B. licheniformis SPB-2 spore germination. Vegetative cells germinated from the spores were found to be involved in [Co(III)–EDTA]{sup −} reduction. More detailed investigations showed that after [Co(III)–EDTA]{sup −} reduction, i.e. [Co(II)–EDTA]{sup 2−} complex was removed by B. licheniformis SPB-2 from the bulk liquid by adsorption phenomenon. The bacterium showed a D{sub 10} value (radiation dose required to kill 90% cells) of ∼250 Gray (Gy), which signifies the potential use of B. licheniformis SPB-2 for bioremediation of moderately active nuclear waste.

  18. Glass Waveguides for Periodic Poling

    DEFF Research Database (Denmark)

    Fage-Pedersen, Jacob; Jacobsen, Rune Shim; Kristensen, Martin

    2005-01-01

    Planar silica-based waveguide devices have been developed for second-harmonic generation by poling with periodic electrodes. We show that detrimental charge transport can occur along interfaces, but with proper choice of fabrication, high-quality devices are obtained.......Planar silica-based waveguide devices have been developed for second-harmonic generation by poling with periodic electrodes. We show that detrimental charge transport can occur along interfaces, but with proper choice of fabrication, high-quality devices are obtained....

  19. Triple system HD 201433 with a SPB star component seen by BRITE - Constellation: Pulsation, differential rotation, and angular momentum transfer

    Science.gov (United States)

    Kallinger, T.; Weiss, W. W.; Beck, P. G.; Pigulski, A.; Kuschnig, R.; Tkachenko, A.; Pakhomov, Y.; Ryabchikova, T.; Lüftinger, T.; Palle, , P. L.; Semenko, E.; Handler, G.; Koudelka, O.; Matthews, J. M.; Moffat, A. F. J.; Pablo, H.; Popowicz, A.; Rucinski, S.; Wade, G. A.; Zwintz, K.

    2017-07-01

    Context. Stellar rotation affects the transport of chemical elements and angular momentum and is therefore a key process during stellar evolution, which is still not fully understood. This is especially true for massive OB-type stars, which are important for the chemical enrichment of the Universe. It is therefore important to constrain the physical parameters and internal angular momentum distribution of massive OB-type stars to calibrate stellar structure and evolution models. Stellar internal rotation can be probed through asteroseismic studies of rotationally split non radial oscillations but such results are still quite rare, especially for stars more massive than the Sun. The slowly pulsating B9V star HD 201433 is known to be part of a single-lined spectroscopic triple system, with two low-mass companions orbiting with periods of about 3.3 and 154 days. Aims: Our goal is to measure the internal rotation profile of HD 201433 and investigate the tidal interaction with the close companion. Methods: We used probabilistic methods to analyse the BRITE - Constellation photometry and radial velocity measurements, to identify a representative stellar model, and to determine the internal rotation profile of the star. Results: Our results are based on photometric observations made by BRITE - Constellation and the Solar Mass Ejection Imager on board the Coriolis satellite, high-resolution spectroscopy, and more than 96 yr of radial velocity measurements. We identify a sequence of nine frequency doublets in the photometric time series, consistent with rotationally split dipole modes with a period spacing of about 5030 s. We establish that HD 201433 is in principle a solid-body rotator with a very slow rotation period of 297 ± 76 days. Tidal interaction with the inner companion has, however, significantly accelerated the spin of the surface layers by a factor of approximately one hundred. The angular momentum transfer onto the surface of HD 201433 is also reflected by the

  20. Separable pole expansions in four-nucleon bound state calculations

    International Nuclear Information System (INIS)

    Sofianos, S.A.; Fiedeldey, H.; Haberzettl, H.; Sandhas, W.

    1982-04-01

    We compare the utility of the Generalized Unitary Pole Expansion (GUPE) and the Energy-Dependent Pole Expansion (EDPE) for the three-body subsystem amplitudes in four-body state calculations for a variety of separable and local nucleon-nucleon interactions. It is found that, with the EDPE, the four-body binding energy is well reproduced with only two terms each for the (2+2)- and the (3+1)-subsystem, respectively, while the GUPE requires three terms for the (3+1)-channel and four terms for the (2+2)-channel. We thus conclude that pole dominance is of greater importance for the GUPE than for EDPE, which works equally well for both types of subsystems. It is found that both methods, in particular the EDPE, converge more rapidly with increasing repulsion in the two-body interaction, i.e. the more realistic the interaction becomes. Both expansions require similar computing times for a converged calculation and are about 15-20 times faster than the widely used Hilbert-Schmidt Expansion (HSE). The respective merits of the two pole expansions are discussed and compared with the HSE. (orig.)

  1. Investigation of antimicrobial activity and statistical optimization of Bacillus subtilis SPB1 biosurfactant production in solid-state fermentation.

    Science.gov (United States)

    Ghribi, Dhouha; Abdelkefi-Mesrati, Lobna; Mnif, Ines; Kammoun, Radhouan; Ayadi, Imen; Saadaoui, Imen; Maktouf, Sameh; Chaabouni-Ellouze, Semia

    2012-01-01

    During the last years, several applications of biosurfactants with medical purposes have been reported. Biosurfactants are considered relevant molecules for applications in combating many diseases. However, their use is currently extremely limited due to their high cost in relation to that of chemical surfactants. Use of inexpensive substrates can drastically decrease its production cost. Here, twelve solid substrates were screened for the production of Bacillus subtilis SPB1 biosurfactant and the maximum yield was found with millet. A Plackett-Burman design was then used to evaluate the effects of five variables (temperature, moisture, initial pH, inoculum age, and inoculum size). Statistical analyses showed that temperature, inoculum age, and moisture content had significantly positive effect on SPB1 biosurfactant production. Their values were further optimized using a central composite design and a response surface methodology. The optimal conditions of temperature, inoculum age, and moisture content obtained under the conditions of study were 37°C, 14 h, and 88%, respectively. The evaluation of the antimicrobial activity of this compound was carried out against 11 bacteria and 8 fungi. The results demonstrated that this biosurfactant exhibited an important antimicrobial activity against microorganisms with multidrug-resistant profiles. Its activity was very effective against Staphylococcus aureus, Staphylococcus xylosus, Enterococcus faecalis, Klebsiella pneumonia, and so forth.

  2. Cookies from composite wheat-sesame peels flours: dough quality and effect of Bacillus subtilis SPB1 biosurfactant addition.

    Science.gov (United States)

    Zouari, Raida; Besbes, Souhail; Ellouze-Chaabouni, Semia; Ghribi-Aydi, Dhouha

    2016-03-01

    Sesame coat is a valuable by-product. The study was carried out on sesame peels flour at different replacing levels of white wheat flour in five cookies dough formulations. The functional properties of composite flours such as swelling capacity, water holding capacity, oil holding capacity, emulsifying capacity, foam capacity, gelatinization temperature, least gelation concentration and bulk density were increased with increase in the sesame peels flour incorporation along with wheat flour. Texture analysis of dough revealed that, the addition of sesame peels flour affected the quality of dough in terms of hardness, cohesion, adhesion and breaking strength. Cookies supplemented with sesame peels flour showed interesting physical properties with lower moisture content and higher spread factor than those made by white wheat flour. But, their hardness increase with the increase of the replacement ratio and their color becomes indesirable. Interestingly, sensory results indicated that cookies supplemented with sesame peels flour were acceptable at a level that not exceeds 30% of incorporation. By the addition of SPB1 biosurfactant at 0.1%, the dough texture profile was significantly improved and the action of this bioemulsifier was more pronounced than a commercial emulsifier known as glycerol monostearate. With the addition of SPB1 biosurfactant on cookies' dough, we manage to obtain cookies softer and with better overall quality. Copyright © 2015. Published by Elsevier Ltd.

  3. Investigation of Antimicrobial Activity and Statistical Optimization of Bacillus subtilis SPB1 Biosurfactant Production in Solid-State Fermentation

    Directory of Open Access Journals (Sweden)

    Dhouha Ghribi

    2012-01-01

    Full Text Available During the last years, several applications of biosurfactants with medical purposes have been reported. Biosurfactants are considered relevant molecules for applications in combating many diseases. However, their use is currently extremely limited due to their high cost in relation to that of chemical surfactants. Use of inexpensive substrates can drastically decrease its production cost. Here, twelve solid substrates were screened for the production of Bacillus subtilis SPB1 biosurfactant and the maximum yield was found with millet. A Plackett-Burman design was then used to evaluate the effects of five variables (temperature, moisture, initial pH, inoculum age, and inoculum size. Statistical analyses showed that temperature, inoculum age, and moisture content had significantly positive effect on SPB1 biosurfactant production. Their values were further optimized using a central composite design and a response surface methodology. The optimal conditions of temperature, inoculum age, and moisture content obtained under the conditions of study were 37°C, 14 h, and 88%, respectively. The evaluation of the antimicrobial activity of this compound was carried out against 11 bacteria and 8 fungi. The results demonstrated that this biosurfactant exhibited an important antimicrobial activity against microorganisms with multidrug-resistant profiles. Its activity was very effective against Staphylococcus aureus, Staphylococcus xylosus, Enterococcus faecalis, Klebsiella pneumonia, and so forth.

  4. Core formation in the shergottite parent body and comparison with the earth

    Science.gov (United States)

    Treiman, Allan H.; Jones, John H.; Drake, Michael J.

    1987-01-01

    Abundances of elements in shergottite, nakhlite, and Chassigny meteorites which originated on a single planet, the shergottite parent body (SPB), were examined with the aim of elucidating the chemical conditions of metal separation and core formation in the SPB and of testing present models of planetary core formation. Using partition coefficients and the SPB mantle composition determined in earlier studies, the abundances of Ag, Au, Co, Ga, Mo, Ni, P, Re, S, and W were modeled, with free parameters being oxygen fugacity, proportion of solid metal formed, proportion of metallic liquid formed, and proportion of silicate that is molten. It is shown that the abundances of all elements (except Mo) could be reproduced using models with these four free parameters. In contrast to the SPB, an equivalent model used to predict element abundances in the earth's mantle was shown by Jones and Drake (1986) to be inadequate; there is at present no hypothesis capable of quantitatively reproducing the elemental abundances of the earth's mantle. The contrast suggests that these two terrestrial planets (assuming that the SPB is Mars) may have accreted or differentiated differently.

  5. Glass Waveguides for Periodic Poling

    DEFF Research Database (Denmark)

    Fage-Pedersen, Jacob; Jacobsen, Rune Shim; Kristensen, Martin

    2005-01-01

    Planar silica-based waveguide devices have been developed for second-harmonic generation by poling with periodic electrodes. We show that detrimental charge transport can occur along interfaces, but with proper choice of fabrication, high-quality devices are obtained....

  6. 47 CFR 32.6411 - Poles expense.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 2 2010-10-01 2010-10-01 false Poles expense. 32.6411 Section 32.6411... FOR TELECOMMUNICATIONS COMPANIES Instructions for Expense Accounts § 32.6411 Poles expense. This account shall include expenses associated with poles. ...

  7. Pole counting and resonance classification

    International Nuclear Information System (INIS)

    Morgan, D.

    1992-01-01

    S-wave resonances occurring close to an inelastic threshold can be classified according to the number of nearby poles they possess. One then has a useful possibility of distinguishing dynamical alternatives by objective appeal to data. Making this quantitative entails developing suitable effective range expansions for various realizations of potential scattering. A key application is deciding the make-up of f 0 (976) (S*). (author)

  8. Treatment of diesel- and kerosene-contaminated water by B. subtilis SPB1 biosurfactant-producing strain.

    Science.gov (United States)

    Mnif, Ines; Ellouze-Chaabouni, Semia; Ayedi, Younes; Ghribi, Dhouha

    2014-08-01

    This study investigated the efficiency of hydrocarbon utilization by B. subtilis SPB1, a biosurfactant-producing strain. Microbial growth, biosurfactant production, and hydrocarbon biodegradation were studied in a liquid mineral medium, supplemented with 2% hydrocarbons in both the absence and in the presence of 0.1% yeast extract. Preliminary studies showed that maximum growth was registered with a 2% hydrocarbon solution. Results showed that the addition of yeast extract greatly stimulated microbial growth and thus induced biosurfactant production. Furthermore, biodegradation efficiencies were higher in the presence of yeast extract. Kerosene fuel was more recalcitrant to biodegradation than diesel oil. This study's findings suggest that the addition of an organic nitrogen source stimulates tension-active agents' production, which emulsifies hydrophobic compounds and enhances their biodegradation and microbial growth.

  9. Conformational Stability of the NH2-Terminal Propeptide of the Precursor of Pulmonary Surfactant Protein SP-B.

    Directory of Open Access Journals (Sweden)

    Ángeles Bañares-Hidalgo

    Full Text Available Assembly of pulmonary surfactant lipid-protein complexes depends on conformational changes coupled with proteolytic maturation of proSP-B, the precursor of pulmonary surfactant protein B (SP-B, along the surfactant biogenesis pathway in pneumocytes. Conformational destabilization of the N-terminal propeptide of proSP-B (SP-BN triggers exposure of the mature SP-B domain for insertion into surfactant lipids. We have studied the conformational stability during GdmCl- or urea-promoted unfolding of SP-BN with trp fluorescence and circular dichroism spectroscopies. Binding of the intermediate states to bis-ANS suggests their molten globule-like character. ΔG0H2O was ~ 12.7 kJ·mol-1 either with urea or GdmCl. None of the thermal transitions of SP-BN detected by CD correspond to protein unfolding. Differential scanning calorimetry of SP-BN evidenced two endothermic peaks involved in oligomer dissociation as confirmed with 2 M urea. Ionic strength was relevant since at 150 mM NaCl, the process originating the endotherm at the highest temperature was irreversible (Tm2 = 108.5°C with an activation energy of 703.8 kJ·mol-1. At 500 mM NaCl the process became reversible (Tm2 = 114.4°C and data were fitted to the Non-two States model with two subpeaks. No free thiols in the propeptide could be titrated by DTNB with or without 5.7 M GdmCl, indicating disulfide bonds establishment.

  10. Method and apparatus for assembling a permanent magnet pole assembly

    Science.gov (United States)

    Carl, Jr., Ralph James; Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Dawson, Richard Nils [Voorheesville, NY; Qu, Ronghai [Clifton Park, NY; Avanesov, Mikhail Avramovich [Moscow, RU

    2009-08-11

    A pole assembly for a rotor, the pole assembly includes a permanent magnet pole including at least one permanent magnet block, a plurality of laminations including a pole cap mechanically coupled to the pole, and a plurality of laminations including a base plate mechanically coupled to the pole.

  11. Body

    OpenAIRE

    Riggs, Christina

    2010-01-01

    The human body is both the physical form inhabited by an individual “self” and the medium through which an individual engages with society. Hence the body both shapes and is shaped by an individual’s social roles. In contrast to the cognate fields of archaeology, anthropology, and classics, there has been little explicit discussion or theorization of the body in Egyptology. Some recent works, discussed here, constitute an exception to this trend, but there is much more scope for exploring anc...

  12. Pole particles in Treder's tetrad theory

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, H.

    1977-01-01

    In the framework of Treder's tetrad theory of gravitation the interaction of pole-particles is considered in post-Newtonian approximation. The perihelion shift for the two-body problems is calculated for different matter-field-couplings. In general it depends not only from the sum of the masses but also from the reduced mass. The additional term is connected with the absorption of gravitation.

  13. Effect of materials and manufacturing on the bending stiffness of vaulting poles

    Science.gov (United States)

    Davis, C. L.; Kukureka, S. N.

    2012-09-01

    The increase in the world record height achieved in pole vaulting can be related to the improved ability of the athletes, in terms of their fitness and technique, and to the change in materials used to construct the pole. For example in 1960 there was a change in vaulting pole construction from bamboo to glass fibre reinforced polymer (GFRP) composites. The lighter GFRP pole enabled the athletes to have a faster run-up, resulting in a greater take-off speed, giving them more kinetic energy to convert into potential energy and hence height. GFRP poles also have a much higher failure stress than bamboo, so the poles were engineered to bend under the load of the athlete, thereby storing elastic strain energy that can be released as the pole straightens, resulting in greater energy efficiency. The bending also allowed athletes to change their vaulting technique from a style that involved the body remaining almost upright during the vault to one where the athlete goes over the bar with their feet upwards. Modern vaulting poles can be made from GFRP and/or carbon fibre reinforced polymer (CFRP) composites. The addition of carbon fibres maintains the mechanical properties of the pole, but allows a reduction in the weight. The number and arrangement of the fibres determines the mechanical properties, in particular the bending stiffness. Vaulting poles are also designed for an individual athlete to take into account each athlete’s ability and physical characteristics. The poles are rated by ‘weight’ to allow athletes to select an appropriate pole for their ability. This paper will review the development of vaulting poles and the requirements to maximize performance. The properties (bending stiffness and pre-bend) and microstructure (fibre volume fraction and lay-up) of typical vaulting poles will be discussed. Originally published as Davis C L and Kukureka S N (2004) Effect of materials and manufacturing on the bending stiffness of vaulting poles The Engineering of

  14. Biosorption of Congo Red from aqueous solution by Bacillus weihenstephanensis RI12; effect of SPB1 biosurfactant addition on biodecolorization potency.

    Science.gov (United States)

    Mnif, Inès; Fendri, Raouia; Ghribi, Dhouha

    2015-01-01

    Bacillus weihenstephanensis RI12, isolated from hydrocarbon contaminated soil, was assessed for Congo Red bio-treatment potency. Results suggested the potential of this bacterium for use in effective treatment of Congo Red contaminated wastewaters under shaking conditions at acidic and neutral pH value. The strain could tolerate higher doses of dyes as it could decolorize up to 1,000 mg/l of Congo Red. When used as microbial surfactant to enhance Congo Red biodecolorization, Bacillus subtilis SPB1-derived lipopeptide accelerated the decolorization rate and maximized the decolorization efficiency at an optimal concentration of biosurfactant of about 0.075%. Studies ensured that Congo Red removal by this strain could be due to an adsorption phenomena. Germination potencies of tomato seeds using the treated dyes under different conditions showed the efficient biotreatment of the azo dye Congo Red especially with the addition of SPB1 biosurfactant. To conclude, the addition of SPB1 bioemulsifier reduced energy costs by reducing the effective decolorization period; the biosurfactant stimulated bacterial decolorization method may provide a highly efficient, inexpensive and time-saving procedure in the treatment of textile effluents.

  15. Macro Fiber Piezocomposite Actuator Poling Study

    Science.gov (United States)

    Werlink, Rudy J.; Bryant, Robert G.; Manos, Dennis

    2002-01-01

    The performance and advantages of Piezocomposite Actuators are to provide a low cost, in-situ actuator/sensor that is flexible, low profile and high strain per volt performance in the same plane of poled voltage. This paper extends reported data for the performance of these Macrofiber Composite (MFC) Actuators to include 4 progressively narrower Intedigitized electrode configurations with several line widths and spacing ratios. Data is reported for max free strain, average strain per applied volt, poling (alignment of the electric dipoles of the PZT ceramic) voltage vs. strain and capacitance, time to poling voltage 95% saturation. The output strain per volt progressively increases as electrode spacing decreases, with saturation occurring at lower poling voltages. The narrowest spacing ratio becomes prone to voltage breakdown or short circuits limiting the spacing width with current fabrication methods. The capacitance generally increases with increasing poling voltage level but has high sensitivity to factors such as temperature, moisture and time from poling which limit its usefulness as a simple indicator. The total time of applied poling voltage to saturate or fully line up the dipoles in the piezoceramic was generally on the order of 5-20 seconds. Less sensitivity to poling due to the applied rate of voltage increase over a 25 to 500 volt/second rate range was observed.

  16. Strength of single-pole utility structures

    Science.gov (United States)

    Ronald W. Wolfe

    2006-01-01

    This section presents three basic methods for deriving and documenting Rn as an LTL value along with the coefficient of variation (COVR) for single-pole structures. These include the following: 1. An empirical analysis based primarily on tests of full-sized poles. 2. A theoretical analysis of mechanics-based models used in...

  17. Planar glass devices for efficient periodic poling

    DEFF Research Database (Denmark)

    Fage-Pedersen, Jacob; Jacobsen, Rune Shim; Kristensen, Martin

    2005-01-01

    We demonstrate that frequency-converting devices of high quality can be realised with glass poling. The devices, made with silica-on-silicon technology, are poled with periodic, embedded electrodes, and used for second-harmonic generation. We obtain precise control of the quasi phase-matching wav......We demonstrate that frequency-converting devices of high quality can be realised with glass poling. The devices, made with silica-on-silicon technology, are poled with periodic, embedded electrodes, and used for second-harmonic generation. We obtain precise control of the quasi phase......-matching wavelength and bandwidth, and a normalised conversion efficiency of 1.4×10-3 %/W/cm2 which, to our knowledge, is the highest obtained so far with periodic glass poling....

  18. [The splenic inferior pole of rats and hyperbaric oxygen].

    Science.gov (United States)

    Paulo, Isabel Cristina Andreatta Lemos; Paulo, Danilo Nagib Salomão; Ferrari, Thiago Antunes; Azeredo, Thiago Caetano Valadão de; Silva, Alcino Lázaro da

    2008-01-01

    To study the functional and morphological features of the lower pole of the spleen in rats submitted, or not, to postoperative hyperbaric oxygen therapy. Seventy-nine Wistar rats, weighing 248.7 +/- 27 g, divided into two groups [group A - simulation (n=40), group B - lower pole (n=39)] underwent surgery and were subdivided into two groups: 11 and 70 postoperative days. Each subgroup was subdivided into animals not treated (nt) (A11nt, n=10; B11nt, n=13; A70nt, n=10; B70nt, n=9) and treated with hyperbaric oxygen (t) (A11t, n=10; B11t, n=9; A70t, n=10; B70t, n=8). Blood was collected for measurement of lipids and immunoglobulins, platelet and Howell-Jolly body count before and after surgery. The spleen and lower pole were removed for histology. There was an increase of total cholesterol (p=0.002), VLDL-cholesterol and triglycerides (p=0.003) and of LDL-cholesterol (p=0.013) in subgroup B11nt, and no alterations were observed in the other subgroups. IgM decreased in subgroups B11t (p=0.007), B11nt (p=0.0000), B70nt (p=0.0005), B70t (p=0.02), and no change was observed in the simulation group. The number of platelets increased in subgroups B11nt (p=0.002) and B11t (p=0.01) and remained unchanged in the other subgroups. Howell-Jolly bodies were less numerous in subgroup B70nt than in subgroup B11nt (p=0.019). Lower pole viability was better in subgroup B11t than in B11nt and in subgroup B70 than in B11, and did not differ between subgroups B70t and B70nt. Function and viability of the remaining lower pole improved during the late postoperative period. Viability and function of the lower pole were better during the early but not during the late postoperative period, in animals submitted to hyperbaric oxygen therapy.

  19. Metrópoles desgovernadas

    Directory of Open Access Journals (Sweden)

    Erminia Maricato

    2011-04-01

    Full Text Available Apesar de sua importância econômica, política, social, demográfica, cultural, territorial e ambiental, há, nas metrópoles brasileiras, uma significativa falta de governo, evidenciada pelas incipientes iniciativas de cooperação administrativa intermunicipal e federativa. Este artigo aborda as mudanças estruturais - no processo de urbanização/ metropolização - devidas à reestruturação produtiva do capitalismo global, e, na escala nacional, trata da mudança no marco institucional - jurídico/político - que passou de concentrador e centralizador, durante o regime militar, para descentralizador e esvaziado, após a Constituição de 1988. O recuo verificado nas políticas sociais durante os anos 1980 e 1990, notadamente em transporte, habitação e saneamento, além do desmonte dos organismos metropolitanos, conduziu nossas metrópoles a um destino de banalização das tragédias urbanas. Em que pese sua urgência, a questão metropolitana não sensibiliza nenhuma força política ou instituição que lhe atribua lugar de destaque na agenda nacional.Despite its economic, political, social, demographic, cultural, territorial and environmental importance, there is a significant lack of government in the brazilian metropolises, evidenced by the incipient initiatives of intermunicipal and federative administrative cooperation. This article analyses the structural changes - in the process of urbanization/metropolization - due to the productive restructuring of global capitalism, and, in a national scale, analyses the change in the institutional mark - legal/political - which passed from concentrator and centralizer, during the Military Regimen, to decentralized and emptied, after 1988 Constitution. The downturn verified in social policies during the years 1980 and 1990, notably in transport, housing and sanitation, besides the dismantling of the metropolitan agencies, has led our cities to the trivialization of urban tragedies. Despite

  20. Holography with a Landau pole

    Science.gov (United States)

    Faedo, Antón F.; Mateos, David; Pantelidou, Christiana; Tarrío, Javier

    2017-02-01

    Holography for UV-incomplete gauge theories is important but poorly understood. A paradigmatic example is d = 4, N=4 super Yang-Mills coupled to N f quark flavors, which possesses a Landau pole at a UV scale ΛLP. The dual gravity solution exhibits a UV singularity at a finite proper distance along the holographic direction. Despite this, holographic renormalization can be fully implemented via analytic continuation to an AdS solution. The presence of a UV cut-off manifests itself in several interesting ways. At energies E ≪ ΛLP no pathologies appear, as expected from effective field theory. In contrast, at scales E ≲ ΛLP the gravitational potential becomes repulsive, and at temperatures T ≲ ΛLP the specific heat becomes negative. Although we focus on N=4 super Yang-Mills with flavor, our qualitative results apply to a much more general class of theories, since they only depend on the fact that the metric near the UV singularity is a hyper-scaling violating metric with exponent θ > d - 1.

  1. Holography with a Landau pole

    Energy Technology Data Exchange (ETDEWEB)

    Faedo, Antón F. [Departament de Física Quántica i Astrofísica and Institut de Ciències del Cosmos (ICC), Universitat de Barcelona, Martí i Franquès 1, ES-08028, Barcelona (Spain); Mateos, David [Departament de Física Quántica i Astrofísica and Institut de Ciències del Cosmos (ICC), Universitat de Barcelona, Martí i Franquès 1, ES-08028, Barcelona (Spain); Institució Catalana de Recerca i Estudis Avançats (ICREA), Passeig Lluís Companys 23, ES-08010, Barcelona (Spain); Pantelidou, Christiana [Departament de Física Quántica i Astrofísica and Institut de Ciències del Cosmos (ICC), Universitat de Barcelona, Martí i Franquès 1, ES-08028, Barcelona (Spain); Tarrío, Javier [Physique Théorique et Mathématique, Université Libre de Bruxelles (ULB), and International Solvay Institutes, Campus de la Plaine CP 231, B-1050, Brussels (Belgium)

    2017-02-08

    Holography for UV-incomplete gauge theories is important but poorly understood. A paradigmatic example is d=4, N=4 super Yang-Mills coupled to N{sub f} quark flavors, which possesses a Landau pole at a UV scale Λ{sub LP}. The dual gravity solution exhibits a UV singularity at a finite proper distance along the holographic direction. Despite this, holographic renormalization can be fully implemented via analytic continuation to an AdS solution. The presence of a UV cut-off manifests itself in several interesting ways. At energies E≪Λ{sub LP} no pathologies appear, as expected from effective field theory. In contrast, at scales E≲Λ{sub LP} the gravitational potential becomes repulsive, and at temperatures T≲Λ{sub LP} the specific heat becomes negative. Although we focus on N=4 super Yang-Mills with flavor, our qualitative results apply to a much more general class of theories, since they only depend on the fact that the metric near the UV singularity is a hyper-scaling violating metric with exponent θ>d−1.

  2. Geometric Modelling of Octagonal Lamp Poles

    Science.gov (United States)

    Chan, T. O.; Lichti, D. D.

    2014-06-01

    Lamp poles are one of the most abundant highway and community components in modern cities. Their supporting parts are primarily tapered octagonal cones specifically designed for wind resistance. The geometry and the positions of the lamp poles are important information for various applications. For example, they are important to monitoring deformation of aged lamp poles, maintaining an efficient highway GIS system, and also facilitating possible feature-based calibration of mobile LiDAR systems. In this paper, we present a novel geometric model for octagonal lamp poles. The model consists of seven parameters in which a rotation about the z-axis is included, and points are constrained by the trigonometric property of 2D octagons after applying the rotations. For the geometric fitting of the lamp pole point cloud captured by a terrestrial LiDAR, accurate initial parameter values are essential. They can be estimated by first fitting the points to a circular cone model and this is followed by some basic point cloud processing techniques. The model was verified by fitting both simulated and real data. The real data includes several lamp pole point clouds captured by: (1) Faro Focus 3D and (2) Velodyne HDL-32E. The fitting results using the proposed model are promising, and up to 2.9 mm improvement in fitting accuracy was realized for the real lamp pole point clouds compared to using the conventional circular cone model. The overall result suggests that the proposed model is appropriate and rigorous.

  3. Tree-loop duality relation beyond single poles

    International Nuclear Information System (INIS)

    Bierenbaum, Isabella; Buchta, Sebastian; Draggiotis, Petros; Malamos, Ioannis; Rodrigo, German

    2012-11-01

    We develop the Tree-Loop Duality Relation for two- and three-loop integrals with multiple identical propagators (multiple poles). This is the extension of the Duality Relation for single poles and multi-loop integrals derived in previous publications. We prove a generalization of the formula for single poles to multiple poles and we develop a strategy for dealing with higher-order pole integrals by reducing them to single pole integrals using Integration By Parts.

  4. SP-B and SP-C containing new synthetic surfactant for treatment of extremely immature lamb lung.

    Science.gov (United States)

    Sato, Atsuyasu; Ikegami, Machiko

    2012-01-01

    Although superiority of synthetic surfactant over animal-driven surfactant has been known, there is no synthetic surfactant commercially available at present. Many trials have been made to develop synthetic surfactant comparable in function to animal-driven surfactant. The efficacy of treatment with a new synthetic surfactant (CHF5633) containing dipalmitoylphosphatidylcholine, phosphatidylglycerol, SP-B analog, and SP-C analog was evaluated using immature newborn lamb model and compared with animal lung tissue-based surfactant Survanta. Lambs were treated with a clinical dose of 200 mg/kg CHF5633, 100 mg/kg Survanta, or air after 15 min initial ventilation. All the lambs treated with air died of respiratory distress within 90 min of age. During a 5 h study period, Pco(2) was maintained at 55 mmHg with 24 cmH(2)O peak inspiratory pressure for both groups. The preterm newborn lamb lung functions were dramatically improved by CHF5633 treatment. Slight, but significant superiority of CHF5633 over Survanta was demonstrated in tidal volume at 20 min and dynamic lung compliance at 20 and 300 min. The ultrastructure of CHF5633 was large with uniquely aggregated lipid particles. Increased uptake of CHF5633 by alveolar monocytes for catabolism was demonstrated by microphotograph, which might be associated with the higher treatment dose of CHF5633. The higher catabolism of CHF5633 was also suggested by the similar amount of surfactant lipid in bronchoalveolar lavage fluid (BALF) between CHF5633 and Survanta groups, despite the 2-fold higher treatment dose of CHF5633. Under the present ventilation protocol, lung inflammation was minimal for both groups, evaluated by inflammatory cell numbers in BALF and expression of IL-1β, IL-6, IL-8, and TNFα mRNA in the lung tissue. In conclusion, the new synthetic surfactant CHF5633 was effective in treating extremely immature newborn lambs with surfactant deficiency during the 5 h study period.

  5. SP-B and SP-C containing new synthetic surfactant for treatment of extremely immature lamb lung.

    Directory of Open Access Journals (Sweden)

    Atsuyasu Sato

    Full Text Available Although superiority of synthetic surfactant over animal-driven surfactant has been known, there is no synthetic surfactant commercially available at present. Many trials have been made to develop synthetic surfactant comparable in function to animal-driven surfactant. The efficacy of treatment with a new synthetic surfactant (CHF5633 containing dipalmitoylphosphatidylcholine, phosphatidylglycerol, SP-B analog, and SP-C analog was evaluated using immature newborn lamb model and compared with animal lung tissue-based surfactant Survanta. Lambs were treated with a clinical dose of 200 mg/kg CHF5633, 100 mg/kg Survanta, or air after 15 min initial ventilation. All the lambs treated with air died of respiratory distress within 90 min of age. During a 5 h study period, Pco(2 was maintained at 55 mmHg with 24 cmH(2O peak inspiratory pressure for both groups. The preterm newborn lamb lung functions were dramatically improved by CHF5633 treatment. Slight, but significant superiority of CHF5633 over Survanta was demonstrated in tidal volume at 20 min and dynamic lung compliance at 20 and 300 min. The ultrastructure of CHF5633 was large with uniquely aggregated lipid particles. Increased uptake of CHF5633 by alveolar monocytes for catabolism was demonstrated by microphotograph, which might be associated with the higher treatment dose of CHF5633. The higher catabolism of CHF5633 was also suggested by the similar amount of surfactant lipid in bronchoalveolar lavage fluid (BALF between CHF5633 and Survanta groups, despite the 2-fold higher treatment dose of CHF5633. Under the present ventilation protocol, lung inflammation was minimal for both groups, evaluated by inflammatory cell numbers in BALF and expression of IL-1β, IL-6, IL-8, and TNFα mRNA in the lung tissue. In conclusion, the new synthetic surfactant CHF5633 was effective in treating extremely immature newborn lambs with surfactant deficiency during the 5 h study period.

  6. A Comparative Analysis of the New Five-Pole and Three-Pole Active Magnet Bearing

    Directory of Open Access Journals (Sweden)

    Pedram Vakili

    2012-07-01

    Full Text Available In recent years, more attention has been given to the active AMBs thanks to their low maintenance cost, suitability for clean environments, and high speed. One of the popular types of AMBs is the three-pole type with integrated and separate cores. Some deficiencies of this type of bearing are its high oscillation, low stability and low efficiency. This paper seeks to analyse the three-pole AMBs and describe their deficiencies and introduce and analyse a new five-pole AMB. The model thus proposed has lower oscillation as well as more stability and efficiency. The five-pole AMB has been simulated by a controller in the presence of disturbance. The results of simulation demonstrate lower vibration and oscillation in the five-pole AMB in comparison with the three-pole model.

  7. On pole structure assignment in linear systems

    Czech Academy of Sciences Publication Activity Database

    Loiseau, J.-J.; Zagalak, Petr

    2009-01-01

    Roč. 82, č. 7 (2009), s. 1179-1192 ISSN 0020-7179 R&D Projects: GA ČR(CZ) GA102/07/1596 Institutional research plan: CEZ:AV0Z10750506 Keywords : linear systems * linear state feedback * pole structure assignment Subject RIV: BC - Control Systems Theory Impact factor: 1.124, year: 2009 http://library.utia.cas.cz/separaty/2009/AS/zagalak-on pole structure assignment in linear systems.pdf

  8. Synthetic surfactant containing SP-B and SP-C mimics is superior to single-peptide formulations in rabbits with chemical acute lung injury

    Directory of Open Access Journals (Sweden)

    Frans J. Walther

    2014-05-01

    Full Text Available Background. Chemical spills are on the rise and inhalation of toxic chemicals may induce chemical acute lung injury (ALI/acute respiratory distress syndrome (ARDS. Although the pathophysiology of ALI/ARDS is well understood, the absence of specific antidotes has limited the effectiveness of therapeutic interventions.Objectives. Surfactant inactivation and formation of free radicals are important pathways in (chemical ALI. We tested the potential of lipid mixtures with advanced surfactant protein B and C (SP-B and C mimics to improve oxygenation and lung compliance in rabbits with lavage- and chemical-induced ALI/ARDS.Methods. Ventilated young adult rabbits underwent repeated saline lung lavages or underwent intratracheal instillation of hydrochloric acid to induce ALI/ARDS. After establishment of respiratory failure rabbits were treated with a single intratracheal dose of 100 mg/kg of synthetic surfactant composed of 3% Super Mini-B (S-MB, a SP-B mimic, and/or SP-C33 UCLA, a SP-C mimic, in a lipid mixture (DPPC:POPC:POPG 5:3:2 by weight, the clinical surfactant Infasurf®, a bovine lung lavage extract with SP-B and C, or synthetic lipids alone. End-points consisted of arterial oxygenation, dynamic lung compliance, and protein and lipid content in bronchoalveolar lavage fluid. Potential mechanism of surfactant action for S-MB and SP-C33 UCLA were investigated with captive bubble surfactometry (CBS assays.Results. All three surfactant peptide/lipid mixtures and Infasurf equally lowered the minimum surface tension on CBS, and also improved oxygenation and lung compliance. In both animal models, the two-peptide synthetic surfactant with S-MB and SP-C33 UCLA led to better arterial oxygenation and lung compliance than single peptide synthetic surfactants and Infasurf. Synthetic surfactants and Infasurf improved lung function further in lavage- than in chemical-induced respiratory failure, with the difference probably due to greater capillary

  9. Clouds Over the North Pole

    Science.gov (United States)

    2004-01-01

    [figure removed for brevity, see original site] Released 29 June 2004 The atmosphere of Mars is a dynamic system. Water-ice clouds, fog, and hazes can make imaging the surface from space difficult. Dust storms can grow from local disturbances to global sizes, through which imaging is impossible. Seasonal temperature changes are the usual drivers in cloud and dust storm development and growth. Eons of atmospheric dust storm activity has left its mark on the surface of Mars. Dust carried aloft by the wind has settled out on every available surface; sand dunes have been created and moved by centuries of wind; and the effect of continual sand-blasting has modified many regions of Mars, creating yardangs and other unusual surface forms. Like yesterday's image, the linear 'ripples' are water-ice clouds. As spring is deepening at the North Pole these clouds are becoming more prevalent. Image information: VIS instrument. Latitude 68.9, Longitude 135.5 East (224.5 West). 38 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are

  10. The potential of wood-based composite poles

    Science.gov (United States)

    Todd F. Shupe; Cheng Piao; Chung Y. Hse

    2009-01-01

    Wood-based composite utility poles are receiving increasing attention in the North American pole market. This interest is being driven by many increasing factors such as increasing: (1) disposal costs of solid wood poles, (2) liability and environmental concerns with traditional means of disposal of solid wood poles, (3) cost and concerns of long-term...

  11. Mechanical properties of small-scale wood laminated composite poles

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; Chung Y. Hse

    2004-01-01

    Power companies in the United States consume millions of solid wood poles every year. These poles are from high-valued trees that are becoming more expensive and less available. wood laminated composite poles (LCP) are a novel alternative to solid wood poles. LCP consists of trapezoid wood strips that are bonded by a synthetic resin. The wood strips can be made from...

  12. Biomechanical analysis of double poling in elite cross-country skiers.

    Science.gov (United States)

    Holmberg, Hans-Christer; Lindinger, Stefan; Stöggl, Thomas; Eitzlmair, Erich; Müller, Erich

    2005-05-01

    To further the understanding of double poling (DP) through biomechanical analysis of upper and lower body movements during DP in cross-country (XC) skiing at racing speed. Eleven elite XC skiers performed DP at 85% of their maximal DP velocity (V85%) during roller skiing at 1 degrees inclination on a treadmill. Pole and plantar ground reaction forces, joint angles (elbow, hip, knee, and ankle), cycle characteristics, and electromyography (EMG) of upper and lower body muscles were analyzed. 1) Pole force pattern with initial impact force peak and the following active force peak (PPF) correlated to V85%, (r = 0.66, P biomechanical aspects. Future research should further investigate the relationship between biomechanical and physiological variables and elaborate training models to improve DP performance.

  13. 2D Stabilised analytic signal method in DC pole-pole potential data ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Using analytic signal method, interpretation of pole-pole secondary electric potentials due to 2D conductive/resistive prisms is presented. ... residual separation to separate out residual anom- alies, which are interpreted for geological .... terms, which are used for the semi-quantitative interpretation. 6.1 Computation of ...

  14. An unusual complication of ischemic injury to upper pole ureter during lower pole heminephroureterectomy

    Directory of Open Access Journals (Sweden)

    Katherine Victoria Hurst

    2013-01-01

    Full Text Available Lower pole heminephroureterectomy is a common paediatric urology procedure with few reported complications. We report a case of possible vascular ischemic injury to the normal remaining ureter following a lower pole heminephroureterectomy, probably due to both ureters sharing a common blood supply. Extra caution in such procedures is therefore warranted.

  15. Jupiter's interior and deep atmosphere: The initial pole-to-pole passes with the Juno spacecraft

    DEFF Research Database (Denmark)

    Bolton, S. J.; Adriani, Alberto; Adumitroaie, V.

    2017-01-01

    On 27 August 2016, the Juno spacecraft acquired science observations of Jupiter, passing less than 5000 kilometers above the equatorial cloud tops. Images of Jupiter's poles show a chaotic scene, unlike Saturn's poles. Microwave sounding reveals weather features at pressures deeper than 100 bars,...

  16. 2D Stabilised analytic signal method in DC pole-pole potential data ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Using analytic signal method, interpretation of pole-pole secondary electric potentials due to 2D conductive/resistive prisms is presented. The estimated parameters are the location, lateral extent or width and depth to top surface of the prism. Forward modelling is attempted by 2D-Finite. Difference method. The proposed ...

  17. USE OF BUTTER MILK AND POULTRY-TRANSFORMING WASTES FOR ENHANCED PRODUCTION OF Bacillus subtilis SPB1 BIOSURFACTANT IN SUBMERGED FERMENTATION

    Directory of Open Access Journals (Sweden)

    Raida Zouari

    2015-04-01

    Full Text Available Biosurfactants are valuable microbial amphiphilic molecules with effective surface-active and biological properties applicable to several industries and processes. Microorganisms synthesize them, especially during growth on water-immiscible substrates, providing an alternative to chemically prepared conventional surfactants. Microbial surfactants are not yet a sustainable alternative to chemically synthesized surfactants seeing their potentially high production charges. This study highlights the use of low-cost agro-industrial raw material for fermentative production of biosurfactants. The Box–Behnken Design and response surface methodology were employed to optimize the concentrations of the ratio butter milk /distilled water, poultry-transforming wastes and inoculum size for lipopeptide biosurfactant production by B.subtilis SPB1 in submerged fermentation.The best production yield was about 12.61 ± 0.7 g/L of crude lipopeptide biosurfactant. It can be obtained when using a ratio butter milk /distilled water of 1.5, poultry-transforming wastes of 23g/L and an inoculum size of 0.12. In comparison to the highest biosurfactant production yield reported for Bacillus subtilis SPB1, three fold increases were obtained.

  18. Effects of Natural versus Synthetic Surfactant with SP-B and SP-C Analogs in a Porcine Model of Meconium Aspiration Syndrome.

    Science.gov (United States)

    Salvesen, Bodil; Curstedt, Tore; Mollnes, Tom Eirik; Saugstad, Ola Didrik

    2014-01-01

    Meconium displaces surfactant from the alveolar surface and inhibits its function. The development of active synthetic surfactants is complicated, especially to synthesize the hydrophobic surfactant proteins SP-B and SP-C. A synthetic surfactant, CHF5633 containing SP-B and SP-C analogs, has been designed to act similarly to the natural surfactant poractant alfa. To test the resistance to meconium inactivation of CHF5633 compared to poractant alfa. Secondary outcome measurements were respiratory and inflammatory parameters. Twenty-six newborn pigs, bodyweight 1.4-2.0 kg were randomized to receive either poractant alfa or CHF5633. After anesthesia, surgery and final stabilization, meconium was instilled endotracheally followed by surfactant. Bronchial lavage fluid was obtained before intervention and every second hour. Respiratory parameters were registered and blood samples drawn before intervention and every hour. Surfactant was inactivated in both groups 6 h after meconium instillation, but CHF5633 was more resistant than poractant alfa in terms of lipid peroxidation. Respiratory parameters were similar in both groups. Inflammatory and hemostatic parameters differed between groups, suggesting that the surfactants may play different roles in the meconium-induced inflammatory process. Due to the differential effects and complex pattern observed, the data do not indicate that one of the surfactants was superior with respect to inflammatory and hemostatic responses. This study indicates that CHF5633 is as efficient as poractant alfa in experimental meconium aspiration syndrome. © 2013 S. Karger AG, Basel.

  19. New magnet pole shape for isochronous cyclotrons

    International Nuclear Information System (INIS)

    Thorn, C.E.; Chasman, C.; Baltz, A.J.

    1981-01-01

    A new design has been developed for shaping pole tips to produce the radially increasing fields required for isochronous cyclotrons. The conventional solid hill poles are replaced by poles mounted over a small secondary gap which tapers radially from maximum at the magnet edge to zero near the center. Field measurements with a model magnet and calculations with the code TRIM show an increase in field at the edge of the magnet without the usual corresponding large increase in fringing, and a radial field shape more nearly field independent than for conventional hills. The flying hills have several advantages for variable energy multiparticle cyclotrons: (1) a large reduction in the power dissipated by isochronizing trim coils; (2) a more constant shape and magnitude flutter factor, eliminating flutter coils and increasing the operating range; and (3) a sharper fall-off of the fringe field, simplifying beam extraction

  20. Pole solutions for flame front propagation

    CERN Document Server

    Kupervasser, Oleg

    2015-01-01

    This book deals with solving mathematically the unsteady flame propagation equations. New original mathematical methods for solving complex non-linear equations and investigating their properties are presented. Pole solutions for flame front propagation are developed. Premixed flames and filtration combustion have remarkable properties: the complex nonlinear integro-differential equations for these problems have exact analytical solutions described by the motion of poles in a complex plane. Instead of complex equations, a finite set of ordinary differential equations is applied. These solutions help to investigate analytically and numerically properties of the flame front propagation equations.

  1. Fundamental pole parameters of the N(1470)

    CERN Document Server

    Lee, P S

    1973-01-01

    The position and residue of the S-matrix pole of the Delta (1236) have been shown to be unique and independent of the particular resonance formula used, thus resolving a discrepancy among phenomenological fits. Unlike the P/sub 33/ partial wave, the P/sub 11/ resonance is highly inelastic, very broad, and has a large background. This produces huge uncertainties in its mass and width, depending on the parametrization used. It is reported that the position of the N(1470) pole is uniquely determined, 1380-110i MeV, from fits to the CERN phase shifts. (10 refs).

  2. Recent advances in poled optical fibres

    DEFF Research Database (Denmark)

    Pruneri, V.; Margulis, W.; Myrén, N.

    2005-01-01

    A second-order nonlinearity can be induced in optical fibres through poling. We describe accomplishments of the EU project GLAMOROUS in making low-cost high performance electrooptic and nonlinear optical fibre- and waveguide-based components. In particular a comparison with more traditional...

  3. Quasiparticle pole strength in nuclear matter

    International Nuclear Information System (INIS)

    Poggioli, R.S.; Jackson, A.D.

    1975-01-01

    It is argued that single-particle-like behavior in nuclear matter is much less probable than Brueckner theory suggests. In particular, the quasiparticle pole strength is evaluated for nuclear matter and it is shown that, contrary to the spirit of Brueckner theory, low momentum states play a crucial role in determining the magnitude of z/sub k/sub F/. (auth)

  4. Kosovo : kannatlikkusele lootmine pole plaan / Chris Patten

    Index Scriptorium Estoniae

    Patten, Chris

    2007-01-01

    Autor leiab, et arvestades Kosovo elanike ülekaalukat soovi olla vaba Serbiast, riigist, mis üritas nad kõrvaldada, ning alternatiivi täielikku puudumist Belgradi poolt, pole rahvusvahelisel kogukonnal muud võimalust kui anda Kosovole iseseisvus

  5. Pole masses of quarks in dimensional reduction

    International Nuclear Information System (INIS)

    Avdeev, L.V.; Kalmykov, M.Yu.

    1997-01-01

    Pole masses of quarks in quantum chromodynamics are calculated to the two-loop order in the framework of the regularization by dimensional reduction. For the diagram with a light quark loop, the non-Euclidean asymptotic expansion is constructed with the external momentum on the mass shell of a heavy quark

  6. Synthetic lung surfactants containing SP-B and SP-C peptides plus novel phospholipase-resistant lipids or glycerophospholipids

    Directory of Open Access Journals (Sweden)

    Robert H. Notter

    2016-10-01

    Full Text Available Background This study examines the biophysical and preclinical pulmonary activity of synthetic lung surfactants containing novel phospholipase-resistant phosphonolipids or synthetic glycerophospholipids combined with Super Mini-B (S-MB DATK and/or SP-Css ion-lock 1 peptides that replicate the functional biophysics of surfactant proteins (SP-B and SP-C. Phospholipase-resistant phosphonolipids used in synthetic surfactants are DEPN-8 and PG-1, molecular analogs of dipalmitoyl phosphatidylcholine (DPPC and palmitoyl-oleoyl phosphatidylglycerol (POPG, while glycerophospholipids used are active lipid components of native surfactant (DPPC:POPC:POPG 5:3:2 by weight. The objective of the work is to test whether these novel lipid/peptide synthetic surfactants have favorable preclinical activity (biophysical, pulmonary for therapeutic use in reversing surfactant deficiency or dysfunction in lung disease or injury. Methods Surface activity of synthetic lipid/peptide surfactants was assessed in vitro at 37 °C by measuring adsorption in a stirred subphase apparatus and dynamic surface tension lowering in pulsating and captive bubble surfactometers. Shear viscosity was measured as a function of shear rate on a Wells-Brookfield micro-viscometer. In vivo pulmonary activity was determined by measuring lung function (arterial oxygenation, dynamic lung compliance in ventilated rats and rabbits with surfactant deficiency/dysfunction induced by saline lavage to lower arterial PO2 to <100 mmHg, consistent with clinical acute respiratory distress syndrome (ARDS. Results Synthetic surfactants containing 5:3:2 DPPC:POPC:POPG or 9:1 DEPN-8:PG-1 combined with 3% (by wt of S-MB DATK, 3% SP-Css ion-lock 1, or 1.5% each of both peptides all adsorbed rapidly to low equilibrium surface tensions and also reduced surface tension to ≤1 mN/m under dynamic compression at 37 °C. However, dual-peptide surfactants containing 1.5% S-MB DATK + 1.5% SP-Css ion-lock 1 combined with

  7. Synthetic lung surfactants containing SP-B and SP-C peptides plus novel phospholipase-resistant lipids or glycerophospholipids.

    Science.gov (United States)

    Notter, Robert H; Gupta, Rohun; Schwan, Adrian L; Wang, Zhengdong; Shkoor, Mohanad Gh; Walther, Frans J

    2016-01-01

    This study examines the biophysical and preclinical pulmonary activity of synthetic lung surfactants containing novel phospholipase-resistant phosphonolipids or synthetic glycerophospholipids combined with Super Mini-B (S-MB) DATK and/or SP-Css ion-lock 1 peptides that replicate the functional biophysics of surfactant proteins (SP)-B and SP-C. Phospholipase-resistant phosphonolipids used in synthetic surfactants are DEPN-8 and PG-1, molecular analogs of dipalmitoyl phosphatidylcholine (DPPC) and palmitoyl-oleoyl phosphatidylglycerol (POPG), while glycerophospholipids used are active lipid components of native surfactant (DPPC:POPC:POPG 5:3:2 by weight). The objective of the work is to test whether these novel lipid/peptide synthetic surfactants have favorable preclinical activity (biophysical, pulmonary) for therapeutic use in reversing surfactant deficiency or dysfunction in lung disease or injury. Surface activity of synthetic lipid/peptide surfactants was assessed in vitro at 37 °C by measuring adsorption in a stirred subphase apparatus and dynamic surface tension lowering in pulsating and captive bubble surfactometers. Shear viscosity was measured as a function of shear rate on a Wells-Brookfield micro-viscometer. In vivo pulmonary activity was determined by measuring lung function (arterial oxygenation, dynamic lung compliance) in ventilated rats and rabbits with surfactant deficiency/dysfunction induced by saline lavage to lower arterial PO 2 to surfactants containing 5:3:2 DPPC:POPC:POPG or 9:1 DEPN-8:PG-1 combined with 3% (by wt) of S-MB DATK, 3% SP-Css ion-lock 1, or 1.5% each of both peptides all adsorbed rapidly to low equilibrium surface tensions and also reduced surface tension to ≤1 mN/m under dynamic compression at 37 °C. However, dual-peptide surfactants containing 1.5% S-MB DATK + 1.5% SP-Css ion-lock 1 combined with 9:1 DEPN-8:PG-1 or 5:3:2 DPPC:POPC:POPG had the greatest in vivo activity in improving arterial oxygenation and dynamic lung

  8. Third Pole Environment (TPE) -Latest Progress

    Science.gov (United States)

    Liu, Z.; Yao, T.; Zhang, F.; Yang, X.; Wang, W.; Ping, F.

    2014-12-01

    Centered on the Tibetan Plateau, the Third Pole region is a unique geographical unit, which represents one of the largest ice masses on the Earth. The region has great impacts on environmental changes in China, the Northern Hemisphere and the globe.It also demonstrates sensitive feedbacks to global changes and the impacts of anthropogenic activities in surrounding regions. Like the Arctic and Antarctica, the Third Pole region is an especially sensitive area that draws great attention from the scientific community. In 2009, with support from the Chinese Academy of Sciences and international organizations, the Third Pole Environment (TPE) program, led by Chinese scientists, was officially launched. The program focuses on the theme of "water-ice-air-ecosystem-human" interactions, with the aim to address the following scientific questions, such as the spatial and temporal characteristics of past environmental changes in the Third pole, the interactions between hydrosphere and cryosphere and hazard processes, the ecological systems' impacts on and response to environmental changes, and the impacts of anthropogenic activities on environmental changes in the region and adaptation strategies. The goal of the program is to reveal environmental change processes and mechanisms on the Third Pole and their influences on and responses to global changes, and thus to serve for enhancement of human adaptation to the changing environment and realization of human-nature harmony. Under the leadership of the co-chairs, and relying on Scientific Committee and the TPE office, the program has accomplished a number of scientific tasks since its inauguration. TPE has made tremendous progress in the research of glacier changes, interactions between the westerlies and monsoon, establishment of field stations, data sharing and education.

  9. Fatigue failure and cracking in high mast poles.

    Science.gov (United States)

    2012-03-01

    This report presents the findings of a comprehensive research project to investigate the fatigue : cracking and failure of galvanized high mast illumination poles (HMIP). Ultrasonic inspection of : poles throughout the state has revealed the presence...

  10. Cell and molecular biology of spindle poles and NuMA.

    Science.gov (United States)

    Fant, Xavier; Merdes, Andreas; Haren, Laurence

    2004-01-01

    Mitotic and meiotic cells contain a bipolar spindle apparatus of microtubules and associated proteins. To arrange microtubules into focused spindle poles, different mechanisms are used by various organisms. Principally, two major pathways have been characterized: nucleation and anchorage of microtubules at preexisting centers such as centrosomes or spindle pole bodies, or microtubule growth off the surface of chromosomes, followed by sorting and focusing into spindle poles. These two mechanisms can even be found in cells of the same organism: whereas most somatic animal cells utilize the centrosome as an organizing center for spindle microtubules, female meiotic cells build an acentriolar spindle apparatus. Most interestingly, the molecular components that drive acentriolar spindle pole formation are also present in cells containing centrosomes. They include microtubule-dependent motor proteins and a variety of structural proteins that regulate microtubule orientation, anchoring, and stability. The first of these spindle pole proteins, NuMA, had already been identified more than 20 years ago. In addition, several new proteins have been characterized more recently. This review discusses their role during spindle formation and their regulation in the cell cycle.

  11. Economics of Red Pine Management for Utility Pole Timber

    Science.gov (United States)

    Gerald H. Grossman; Karen Potter-Witter

    1991-01-01

    Including utility poles in red pine management regimes leads to distinctly different management recommendations. Where utility pole markets exist, managing for poles will maximize net returns. To do so, plantations should be maintained above 110 ft2/ac, higher than usually recommended. In Michigan's northern lower peninsula, approximately...

  12. Theoretical modeling and experimental analyses of laminated wood composite poles

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; Vijaya Gopu; Chung Y. Hse

    2005-01-01

    Wood laminated composite poles consist of trapezoid-shaped wood strips bonded with synthetic resin. The thick-walled hollow poles had adequate strength and stiffness properties and were a promising substitute for solid wood poles. It was necessary to develop theoretical models to facilitate the manufacture and future installation and maintenance of this novel...

  13. 46 CFR 111.79-3 - Grounding pole.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Grounding pole. 111.79-3 Section 111.79-3 Shipping COAST... REQUIREMENTS Receptacles § 111.79-3 Grounding pole. Each receptacle outlet that operates at 100 volts or more must have a grounding pole. ...

  14. Second-harmonic imaging of poled silica waveguides

    DEFF Research Database (Denmark)

    Arentoft, Jesper; Pedersen, Kjeld; Bozhevolnyi, Sergey I.

    2000-01-01

    Electric-field poled silica-based waveguides are characterized by measurements of second-harmonic generation (SHG) and of the linear electro-optic effect (LEO). A SHG scanning technique allowing for high-resolution imaging of poled devices is demonstrated. Scans along the direction of the poling...

  15. Clusters of cyclones encircling Jupiter's poles.

    Science.gov (United States)

    Adriani, A; Mura, A; Orton, G; Hansen, C; Altieri, F; Moriconi, M L; Rogers, J; Eichstädt, G; Momary, T; Ingersoll, A P; Filacchione, G; Sindoni, G; Tabataba-Vakili, F; Dinelli, B M; Fabiano, F; Bolton, S J; Connerney, J E P; Atreya, S K; Lunine, J I; Tosi, F; Migliorini, A; Grassi, D; Piccioni, G; Noschese, R; Cicchetti, A; Plainaki, C; Olivieri, A; O'Neill, M E; Turrini, D; Stefani, S; Sordini, R; Amoroso, M

    2018-03-07

    The familiar axisymmetric zones and belts that characterize Jupiter's weather system at lower latitudes give way to pervasive cyclonic activity at higher latitudes. Two-dimensional turbulence in combination with the Coriolis β-effect (that is, the large meridionally varying Coriolis force on the giant planets of the Solar System) produces alternating zonal flows. The zonal flows weaken with rising latitude so that a transition between equatorial jets and polar turbulence on Jupiter can occur. Simulations with shallow-water models of giant planets support this transition by producing both alternating flows near the equator and circumpolar cyclones near the poles. Jovian polar regions are not visible from Earth owing to Jupiter's low axial tilt, and were poorly characterized by previous missions because the trajectories of these missions did not venture far from Jupiter's equatorial plane. Here we report that visible and infrared images obtained from above each pole by the Juno spacecraft during its first five orbits reveal persistent polygonal patterns of large cyclones. In the north, eight circumpolar cyclones are observed about a single polar cyclone; in the south, one polar cyclone is encircled by five circumpolar cyclones. Cyclonic circulation is established via time-lapse imagery obtained over intervals ranging from 20 minutes to 4 hours. Although migration of cyclones towards the pole might be expected as a consequence of the Coriolis β-effect, by which cyclonic vortices naturally drift towards the rotational pole, the configuration of the cyclones is without precedent on other planets (including Saturn's polar hexagonal features). The manner in which the cyclones persist without merging and the process by which they evolve to their current configuration are unknown.

  16. The Gattini South Pole UV experiment

    Science.gov (United States)

    Moore, Anna M.; Ahmed, Sara; Ashley, Michael C. B.; Croner, Ernest; Delacroix, Alex; Ebihara, Yusuke; Fucik, Jason; Martin, D. Christopher; Velur, Viswa; Weatherwax, Allan

    2012-09-01

    The Gattini South Pole UV experiment (Gattini SPUV) was deployed to the South Pole dark sector in February 2010 and has recently completed a highly successful first season of winter time observations. The experiment has, for the first time ever, measured and categorized the optical night sky brightness at the very blue wavelengths. The experiment consists of a remotely operated 6” aperture custom designed telescope. The telescope feeds a blue sensitive imager with 4 degree field of view that contains a bank of 3 filters: SDSS g’, Bessel U and a custom “super U” filter specifically designed to probe the sky emission at wavelengths approaching the atmospheric cut-off. The filters are continually cycled with exposure times ranging from 30 to 300 seconds throughout the winter period. The telescope, in addition, feeds a 2 degree long slit VPH grating spectrograph with R~1000. The bandwidth is 350-450nm. The spectra are recorded simultaneously with the imager exposures. The experiment is designed for low temperature Antarctic operation and resides on the roof of the MAPO building in the South Pole Antarctic sector. The primary science goals are to categorize the Antarctic winter-time sky background at the very bluest of wavelengths as a pathfinder for the Antarctic Cosmic Web Imager. We present a technical overview of the experiment and results from the first winter season.

  17. The South Pole and the Ross Sea

    Science.gov (United States)

    2002-01-01

    This image shows a rare clear view of the South Pole (lower right) and the Ross Sea, Antarctica. The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) acquired the scene on December 26, 2001. The geographic South Pole is located in the center of Antarctica, at an altitude of 2,900 meters (9,300 feet). It rests on a continent-wide ice sheet that is 2,870 m thick, with the underlying bedrock only 30 m (98 feet) above sea level. The ice underlying the South Pole is as much as 140,000 years old, and is currently accumulating at about 82 cm (32 inches) per year. Roughly 2,500 km (1,550 miles) away is the green water of the Ross Sea, which indicates the presence of large numbers of phytoplankton. This is a highly productive part of the world's oceans. Also note the ice gathered around McMurdo Sound, seen toward the lefthand shoreline of the Ross Sea, at the edge of the Ross Ice Shelf. According to National Science Foundation researchers, this ice is making it difficult for penguins to reach their food supply. Separating the continental Antarctic ice sheet from the Ross Sea are the Queen Maud Mountains and the Ross Ice Shelf. Image courtesy the SeaWiFS Project, NASA/Goddard Space Flight Center, and ORBIMAGE

  18. Secondary electron emission yield on poled silica based thick films

    DEFF Research Database (Denmark)

    Braga, D.; Poumellec, B.; Cannas, V.

    2004-01-01

    injection, we pointed out an electric field 0.5 µm below the surface for our poling conditions and directed in the same direction as the external field applied during the poling process. Then, the dependence of on the injected dose of electrons allows us to deduce that the poling process disturbs the glass......Studies on the distribution of the electric field produced by a thermal poling process in a layer of Ge-doped silica on silicon substrate, by using secondary electron emission yield (SEEY) measurements () are presented. Comparing 0 between poled and unpoled areas, the SEEY at the origin of electron...... structure strongly enough for leading to a weak conductivity. It is then easy to display the poled areas. We have also pointed out an effect of the electric properties of the glass on the measurements obtained with the Electron Probe for MicroAnalysis....

  19. Multiple pole in the electron--hydrogen-atom scattering amplitude

    International Nuclear Information System (INIS)

    Amusia, M.Y.; Kuchiev, M.Y.

    1982-01-01

    It is demonstrated that the amplitude for electron--hydrogen-atom forward scattering has the third-order pole at the point E = -13.6 eV, E being the energy of the incident electron. The coefficients which characterize the pole are calculated exactly. The invalidity of the Born approximation is proved. The contribution of the pole singularity to the dispersion relation for the scattering amplitude is discussed

  20. Determination of the crystallite orientation distribution from direct pole figures

    International Nuclear Information System (INIS)

    Araujo Gomes, P.A.M. de.

    1977-01-01

    A method is described which allows to calculate the crystallite orientation distribution in polycrystalline material, from direct pole figures data of its crystallographic planes (Roe's Method). The programme was applied to (1010), (0002), (1011) and (1120) complete pole figures data for a commercial, thin sheet Zircaloy-4 tubing specimen. A semi-automatic Rigaku-Denki texture goniometer, which scans the reciprocal lattice sphere pointwise outputting the data in a punched tape, was used to obtain the pole figures. This is consistent with the results obtained through direct conclusion from the pole figures. (author)

  1. South Pole Region of the Moon as Seen by Clementine

    Science.gov (United States)

    1994-01-01

    Lunar mosaic of 1500 Clementine images of the south polar region of the moon. The projection is orthographic, centered on the south pole. The Schrodinger Basin (320 km in diameter) is located in the lower right of the mosaic. Amundsen-Ganswindt is the more subdued circular basin between Schrodinger and the pole. The polar regions of the moon are of special interest because of the postulated occurrence of ice in permanently shadowed areas. The south pole is of greater interest because the area that remains in shadow is much larger than that at the north pole.

  2. Thermal poling of multi-wire array optical fiber

    DEFF Research Database (Denmark)

    Huang, Lin; An, Honglin; Hayashi, Juliano G.

    2018-01-01

    We demonstrate in this paper thermal poling of multi-wire array fibers, which extends poling of fibers with two anodes to similar to 50 and similar to 500 wire array anodes. The second harmonic microscopy observations show that second order nonlinearity (SON) layers are developed surrounding all...... the rings of wires in the similar to 50 anode array fiber with poling of 1.8kV, 250 degrees C and 30min duration, and the outer rings of the similar to 500 anode array fiber at lower poling temperature. Our simulations based on a two-dimensional charge dynamics model confirm this can be explained...

  3. Dimensionally regularized Tsallis' statistical mechanics and two-body Newton's gravitation

    Science.gov (United States)

    Zamora, J. D.; Rocca, M. C.; Plastino, A.; Ferri, G. L.

    2018-05-01

    Typical Tsallis' statistical mechanics' quantifiers like the partition function and the mean energy exhibit poles. We are speaking of the partition function Z and the mean energy 〈 U 〉 . The poles appear for distinctive values of Tsallis' characteristic real parameter q, at a numerable set of rational numbers of the q-line. These poles are dealt with dimensional regularization resources. The physical effects of these poles on the specific heats are studied here for the two-body classical gravitation potential.

  4. Optimization of the Nutritional Parameters for Enhanced Production of B. subtilis SPB1 Biosurfactant in Submerged Culture Using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    Ines Mnif

    2012-01-01

    Full Text Available Nutritional requirements can contribute considerably to the production cost and the bioprocess economics. Media optimisation using response surface methodology is one of the used methods to ameliorate the bioprocess economics. In the present study, biosurfactant production by Bacillus subtilis SPB1 was effectively enhanced by response surface methodology. A Plackett-Burman-based statistical screening procedure was adopted to determine the most important factor affecting lipopeptide production. Eleven variables are screened and results show that glucose, K2HPO4, and urea concentrations influence the most biosurfactant production. A Central Composite Design was conducted to optimize the three selected factors. Statistical analyses of the data of model fitting were done by using NemrodW. Results show a maximum predicted biosurfactant concentration of 2.93 (±0.32 g/L when using 15 g/L glucose, 6 g/L urea, and 1 g/L K2HPO4. The predicted value is approximately 1.65 much higher than the original production determined by the conventional one-factor-at-a-time optimization method.

  5. Improved Biosurfactant Production byBacillus subtilisSPB1 Mutant Obtained by Random Mutagenesis and Its Application in Enhanced Oil Recovery in a Sand System.

    Science.gov (United States)

    Bouassida, Mouna; Ghazala, Imen; Ellouze-Chaabouni, Semia; Ghribi, Dhouha

    2018-01-28

    Biosurfactants or microbial surfactants are surface-active biomolecules that are produced by a variety of microorganisms. Biodegradability and low toxicity have led to the intensification of scientific studies on a wide range of industrial applications for biosurfactants in the field of environmental bioremediation as well as the petroleum industry and enhanced oil recovery. However, the major issues in biosurfactant production are high production cost and low yield. Improving the bioindustrial production processes relies on many strategies, such as the use of cheap raw materials, the optimization of medium-culture conditions, and selecting hyperproducing strains. The present work aims to obtain a mutant with higher biosurfactant production through applying mutagenesis on Bacillus subtilis SPB1 using a combination of UV irradiation and nitrous acid treatment. Following mutagenesis and screening on blood agar and subsequent formation of halos, the mutated strains were examined for emulsifying activity of their culture broth. A mutant designated B. subtilis M2 was selected as it produced biosurfactant at twice higher concentration than the parent strain. The potential of this biosurfactant for industrial uses was shown by studying its stability to environmental stresses such as pH and temperature and its applicability in the oil recovery process. It was practically stable at high temperature and at a wide range of pH, and it recovered above 90% of motor oil adsorbed to a sand sample.

  6. Bridging the Poles: Education Linked with Research

    Science.gov (United States)

    Pfirman, S.; Bell, R. E.; Turrin, M.; Maru, P.

    2004-12-01

    An international group of 65 scientists, educators and media specialists gathered at the "Bridging the Poles" workshop in Washington, DC on June 23-25, to define strategies that will inspire the general public and engage the next generation of polar scientists, engineers and leaders. This NSF-sponsored workshop was the first effort to develop an integrated education and outreach program for the International Polar Year of 2007-2009. Through a series of plenary talks and roundtable discussions, workshop participants focused on: engaging diverse communities, opportunities and needs for different levels, possibilities for thematic areas, and programs to feature nationally and internationally over the next 5 years. To maximize the potential of the International Polar Year, we need to coordinate research, education and outreach efforts, at the international as well as national level, with the goal of building an integrated and exciting public presence during 2007-2009. Successful education and outreach programming requires leveraging existing resources, creating new programs, connecting communities, and developing partnerships between agencies, scientists, educators, and the public. We need to consider the rich heritage of indigenous Arctic peoples, build capacity within communities through targeted efforts, and focus on making the poles relevant to diverse communities by using interdisciplinary approaches, e.g. cultural as well as scientific. A series of education and outreach packages for large-scale science endeavors should be rolled out to the public as major media events. The media -- television, radio and print -- as well as educators, zoos and museums are eager to use timely, accessible, and meaningful content. An Interagency Working Group on IPY Education and Outreach, with a staff and a central office, must be created to coordinate and leverage programs. A sophisticated web portal should be developed to serve content and contacts for researchers, educators, the

  7. Retratos da metrópole parisiense

    OpenAIRE

    Saint-Julien, Thérèse; Goix, Renaud Le

    2009-01-01

    « La métropole parisienne, centralité, inégalité, proximité » propõe uma leitura e uma interpretação das tendências do território da Île de France (a região que inclui Paris e sete outros départements), ou seja, uma grande metrópole mundial de cerca de 11,3 milhões de habitantes em 2004, ligada às redes da globalização e da metropolização. O livro esboça os traços principais de suas estruturas territoriais emergentes, sublinha os desafios, o alcance dos mesmos e as contradições. Sem pretensão...

  8. Retratos da metrópole parisiense

    Directory of Open Access Journals (Sweden)

    Thérèse Saint-Julien

    2009-07-01

    Full Text Available « La métropole parisienne, centralité, inégalité, proximité » propõe uma leitura e uma interpretação das tendências do território da Île de France (a região que inclui Paris e sete outros départements, ou seja, uma grande metrópole mundial de cerca de 11,3 milhões de habitantes em 2004, ligada às redes da globalização e da metropolização. O livro esboça os traços principais de suas estruturas territoriais emergentes, sublinha os desafios, o alcance dos mesmos e as contradições. Sem pretensão...

  9. Jupiter's interior and deep atmosphere: The initial pole-to-pole passes with the Juno spacecraft

    Science.gov (United States)

    Bolton, S. J.; Adriani, A.; Adumitroaie, V.; Allison, M.; Anderson, J.; Atreya, S.; Bloxham, J.; Brown, S.; Connerney, J. E. P.; DeJong, E.; Folkner, W.; Gautier, D.; Grassi, D.; Gulkis, S.; Guillot, T.; Hansen, C.; Hubbard, W. B.; Iess, L.; Ingersoll, A.; Janssen, M.; Jorgensen, J.; Kaspi, Y.; Levin, S. M.; Li, C.; Lunine, J.; Miguel, Y.; Mura, A.; Orton, G.; Owen, T.; Ravine, M.; Smith, E.; Steffes, P.; Stone, E.; Stevenson, D.; Thorne, R.; Waite, J.; Durante, D.; Ebert, R. W.; Greathouse, T. K.; Hue, V.; Parisi, M.; Szalay, J. R.; Wilson, R.

    2017-05-01

    On 27 August 2016, the Juno spacecraft acquired science observations of Jupiter, passing less than 5000 kilometers above the equatorial cloud tops. Images of Jupiter's poles show a chaotic scene, unlike Saturn's poles. Microwave sounding reveals weather features at pressures deeper than 100 bars, dominated by an ammonia-rich, narrow low-latitude plume resembling a deeper, wider version of Earth's Hadley cell. Near-infrared mapping reveals the relative humidity within prominent downwelling regions. Juno's measured gravity field differs substantially from the last available estimate and is one order of magnitude more precise. This has implications for the distribution of heavy elements in the interior, including the existence and mass of Jupiter's core. The observed magnetic field exhibits smaller spatial variations than expected, indicative of a rich harmonic content.

  10. Spectral analysis of gluonic pole matrix elements for fragmentation

    NARCIS (Netherlands)

    Gamberg, L. P.; Mukherjee, A.B.; Mulders, P.J.G.

    2008-01-01

    The nonvanishing of gluonic pole matrix elements can explain the appearance of single spin asymmetries in high-energy scattering processes. We use a spectator framework approach to investigate the spectral properties of quark-quark-gluon correlators and use this to study gluonic pole matrix

  11. Second harmonic generation from corona-poled polymer thin films ...

    Indian Academy of Sciences (India)

    2014-02-09

    Feb 9, 2014 ... We characterize thermal stability of second harmonic generation (SHG) properties of four different Y-type polymers poled using corona poling method. These polymers are based on donor–acceptor–donor-type repeating unit with different aromatic moieties acting as donors and dicyanomethylene acting as ...

  12. Derivation of nominal strength for wood utility poles

    Science.gov (United States)

    Ronald W. Wolfe; Jozsef Bodig; Patricia Lebow

    2001-01-01

    The designated fiber stress values published in the American National Standards Institute Standard for Poles, ANSI 05.1, no longer reflect the state of the knowledge. These values are based on a combination of test data from small clear wood samples and small poles (

  13. Second harmonic generation from corona-poled polymer thin films ...

    Indian Academy of Sciences (India)

    2014-02-09

    Feb 9, 2014 ... Abstract. We characterize thermal stability of second harmonic generation (SHG) properties of four different Y-type polymers poled using corona poling method. These polymers are based on donor–acceptor–donor-type repeating unit with different aromatic moieties acting as donors and dicyanomethylene ...

  14. Three Phase Soft Commutation Auxilary Resonant Pole Inverter

    OpenAIRE

    Vaclav Sladecek

    2006-01-01

    This paper covers the circuit modification of the power part of the inverter with auxiliary resonant poles utilising configuration of switches realised with routinely produced IGBT modules. Covered is also the control optimisation which goal is the minimisation of switching of the auxiliary resonant pole. Presented results were gained on a prototype of an inverter laboratory sample.

  15. Gluability of out-of-service utility poles

    Science.gov (United States)

    Han Roliadi; Chung Y. Hse; Elvin T. Choong; Todd F. Shupe

    2000-01-01

    This investigation determined the gluability of weathered, out-of-service southern yellow pine (SYP) (Pinus spp.) utility poles. Three types of adhesives were used: resorcinol-phenol formaldehyde (RPF), polyvinyl acetate (PVA), and casein. The poles consisted of two service duration groups: 5 and 25 years. Longer weathering caused greater reduction in creosote content...

  16. Solar Open Flux Migration from Pole to Pole: Magnetic Field Reversal.

    Science.gov (United States)

    Huang, G-H; Lin, C-H; Lee, L C

    2017-08-25

    Coronal holes are solar regions with low soft X-ray or low extreme ultraviolet intensities. The magnetic fields from coronal holes extend far away from the Sun, and thus they are identified as regions with open magnetic field lines. Coronal holes are concentrated in the polar regions during the sunspot minimum phase, and spread to lower latitude during the rising phase of solar activity. In this work, we identify coronal holes with outward and inward open magnetic fluxes being in the opposite poles during solar quiet period. We find that during the sunspot rising phase, the outward and inward open fluxes perform pole-to-pole trans-equatorial migrations in opposite directions. The migration of the open fluxes consists of three parts: open flux areas migrating across the equator, new open flux areas generated in the low latitude and migrating poleward, and new open flux areas locally generated in the polar region. All three components contribute to the reversal of magnetic polarity. The percentage of contribution from each component is different for different solar cycle. Our results also show that the sunspot number is positively correlated with the lower-latitude open magnetic flux area, but negatively correlated with the total open flux area.

  17. Pole Dancing Auto-ethnography – Practice, Pedagogy, Performance

    Directory of Open Access Journals (Sweden)

    Amy Patricia Cadwallader

    2017-02-01

    Full Text Available In this research paper, the author addresses the following four questions: 1 What are the implications of bringing pole dancing into concert dance, not as a caricature or theatrical version of what is performed in strip clubs, but as its own, free-standing art form? 2 In what ways will years of ballet and modern dance training influence the type of dancing that emerges from dancers when poles and other apparatuses are introduced? 3 How can the author create an original pole dancing style and pedagogical methods for teaching it? 4 Who participates in pole fitness classes and how does the demographic change based on location? What about when pole fitness classes are offered in an academic setting? The author shares first-hand experiences of investigating pole dancing in fitness classes, attending performances, engaging in a rehearsal process with highly trained dancers, and teaching pole dancing to movers with a wide range of abilities. The author addresses how research plans changed as she encountered limitations of budget and time constraints. The author also elaborates on the creative process that she engaged in with her thesis cast, collaborators, and supporting designers in the making of Super-beneath, a theatrical dance work that uses five, free-standing poles. She outline the vignettes, overall structure, and narrative of the work. The author then discusses where this research fits into the larger field of pole dancing, and the even larger field of dance. In the final sections of this paper, the author describes her pedagogical practices relating to pole classes, what “practice as research” means to her, and how she would like to continue on this research trajectory in the future.

  18. Simplified Analytic Approach of Pole-to-Pole Faults in MMC-HVDC for AC System Backup Protection Setting Calculation

    Directory of Open Access Journals (Sweden)

    Tongkun Lan

    2018-01-01

    Full Text Available AC (alternating current system backup protection setting calculation is an important basis for ensuring the safe operation of power grids. With the increasing integration of modular multilevel converter based high voltage direct current (MMC-HVDC into power grids, it has been a big challenge for the AC system backup protection setting calculation, as the MMC-HVDC lacks the fault self-clearance capability under pole-to-pole faults. This paper focused on the pole-to-pole faults analysis for the AC system backup protection setting calculation. The principles of pole-to-pole faults analysis were discussed first according to the standard of the AC system protection setting calculation. Then, the influence of fault resistance on the fault process was investigated. A simplified analytic approach of pole-to-pole faults in MMC-HVDC for the AC system backup protection setting calculation was proposed. In the proposed approach, the derived expressions of fundamental frequency current are applicable under arbitrary fault resistance. The accuracy of the proposed approach was demonstrated by PSCAD/EMTDC (Power Systems Computer-Aided Design/Electromagnetic Transients including DC simulations.

  19. Heavy Cratering near Callisto's South Pole

    Science.gov (United States)

    1997-01-01

    Images from NASA's Galileo spacecraft provide new insights into this region near Callisto's south pole. This two frame mosaic shows a heavily cratered surface with smooth plains in the areas between craters. North is to the top of the image. The smoothness of the plains appears to increase toward the south pole, approximately 480 kilometers (293 miles) south of the bottom of the image. This smoothness of Callisto's surface was not evident in images taken during the 1979 flyby of NASA's Voyager spacecraft because the resolution was insufficient to show the effect. This smooth surface, and the process(es) that cause it, are among the most intriguing aspects of Callisto. Although not fully understood, the process(es) responsible for this smoothing could include erosion by tiny meteorites and energetic ions. Some craters, such as Keelut, the 47 kilometer (29 mile) crater in the lower right corner, have sharp, well defined rims. Keelut contains an inner ring surrounding a central depression about 17 kilometers (11 miles) in diameter. Keelut, and the more irregularly shaped, degraded Reginleif, the 32 kilometer (19.5 mile) crater in the top center of the image, are very shallow and have flat floors. Crater forms can be seen down to less than 2 kilometers (1.2 miles) in diameter in the image. Each picture element (pixel) in this image is approximately 0.68 kilometers (0.41 miles) across.This image which was taken by the Galileo spacecraft's solid state imaging (CCD) system during its eighth orbit around Jupiter, on May 6th, 1997. The center of the image is located at 71.3 degrees south latitude, 97.6 degrees west longitude, and was taken when the spacecraft was approximately 35,470 kilometers (21,637 miles) from Callisto.The Jet Propulsion Laboratory, Pasadena, CA manages the mission for NASA's Office of Space Science, Washington, DC.This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http

  20. Noise generation mechanisms in claw pole alternators

    Science.gov (United States)

    Eversman, W.; Burns, S.; Pekarek, S.; Bai, Hua; Tichenor, J.

    2005-05-01

    Noise of claw pole alternators, generated electromagnetically and structurally radiated, has been the subject of an extensive research program. The goal has been to identify and reduce noise radiation mechanisms in claw pole (Lundell) alternators used in automotive applications. Two approaches have been followed. In the first, electromagnetic sources of noise have been investigated by lumped parameter and magnetically equivalent circuit modeling and simulation, and by related experimentation. This is the subject of separate papers. The second, concurrent study reported here has investigated machine and mount responses to an electromagnetically generated torque ripple. Modeling and experimentation has led to the conclusion that there exists a high correlation between electromagnetic sources, torque ripple, and radiated noise. Experimentation also has led to the conclusion that noise characteristics of a given machine are substantially altered by modification of the mounting configuration. The work reported here involves modeling, simulation, and experiment to isolate machine dynamic characteristics and mounting geometries which contribute to strong coupling between torque ripple and machine/mount dynamic response. A low-order model of the alternator which includes shaft flexibility, gyroscopic effects, shaft bearing asymmetry, mounting lug geometry, and mounting structure dynamics has been created. The model provides a rapid simulation of dynamic response in the form of a transfer function between torque ripple and mounting forces. Generic studies of a simplified mounting structure coupled to the machine model are presented here. Acoustic testing of several machine configurations on a production mount has been carried out to investigate 36th order noise in three phase machines and 72nd order noise in six-phase machines. Electromagnetic modeling and dynamic response simulations suggest that the six-phase machine is inherently quieter. This is supported by

  1. Territorial Balancing of Poles of Development

    Directory of Open Access Journals (Sweden)

    CLAUDIA POPESCU

    2008-01-01

    Full Text Available The paper is part of the study "Specific problems of the development of the settlement network in south-eastern Romania. Regions of development 3 (South, 4 (South-West and 8 (Bucharest-Ilfov" elaborated during 2004 – 2006, within the AMTRANS programme funded by the Ministry of Education and Research, coordinated by INCD – URBANPROIECT in partnership with the Institute of Geography of the Romanian Academy and the Qualification in Statistics National Centre. The general objective of the project was sustainable and balanced spatial development of the settlement network and promotion of new relationships between urban and rural. Concretely, the study has produced a model of a polycentric and balanced settlement network according to the European principles. The case study testing and validating this model took place in southern Romania, territory exhibiting acutely the entire range of problems related to the state of the settlement network: profoundly large rural areas, accentuated dynamics of declaring new cities without sufficient evidence, excessive polarization exercised by Bucharest, etc. The paper presents the intervention directions needed to balance in the territory urban poles within the studied area, focusing on the establishment of orientation policies to consolidate the role of each settlement based on the hierarchical level of importance: European, national, regional, and local. The paper also identifies possible functional urban areas: the metropolitan area of Bucharest, areas of potential strategic integration, areas of cooperation between the small and medium-sized cities and the rural regions. Within each of these areas, the paper proposes to establish new relationships between urban and rural based on partnership, involving cooperation and coordination in achieving common goals.The study considers that the poles of development are the key element of proposed model, and their identification, formation, and balanced distribution

  2. Pole preservatives in soils adjacent to in-service utility poles in the United States. Final report

    International Nuclear Information System (INIS)

    Taylor, B.B.; Ripp, J.A.; Ladwig, K.

    1997-12-01

    As a result of increasing concerns regarding the environmental fate of wood preservatives, EPRI carried out a study of soils in the vicinity of in-service wood pole sites. More than 8,000 soil samples adjacent to 180 PCP-treated and 22 creosote-treated wood poles were collected and analyzed for chemicals of interest. The results showed that concentrations of wood preservative chemicals tended to be highest in soils located in very close proximity to the poles with rapid decreases in concentrations observed with distance from the poles. Soil partitioning, biodegradation, and modeling studies on PCP were also completed to augment the soil data and to provide additional information on the release, migration, and fate of wood preservatives at in-service pole sites

  3. Resource Prospector: Evaluating the ISRU Potential of the Lunar Poles

    Science.gov (United States)

    Colaprete, A.; Elphic, R. C.; Andrews, D.; Bluethmann, W.; Quinn, J.; Chavers, D. G.

    2017-12-01

    Resource Prospector (RP) is a lunar volatiles prospecting mission being developed for potential flight in CY2021-2022. The mission includes a rover-borne payload that (1) can locate surface and near-subsurface volatiles, (2) excavate and analyze samples of the volatile-bearing regolith, and (3) demonstrate the form, extractability and usefulness of the materials. The primary mission goal for RP is to evaluate the In-Situ Resource Utilization (ISRU) potential of the lunar poles. While it is now understood that lunar water and other volatiles have a much greater extent of distribution, possible forms, and concentrations than previously believed, to fully understand how viable these volatiles are as a resource to support human exploration of the solar system, the distribution and form needs to be understood at a "human" scale. That is, the "ore body" must be better understood at the scales it would be worked before it can be evaluated as a potential architectural element within any evolvable lunar or Mars campaign. This talk will provide an overview of the RP mission with an emphasis on mission goals and measurements, and will provide an update as to its current status.

  4. Pole-factorization theorem in quantum electrodynamics

    International Nuclear Information System (INIS)

    Stapp, H.P.

    1996-01-01

    In quantum electrodynamics a classical part of the S-matrix is normally factored out in order to obtain a quantum remainder that can be treated perturbatively without the occurrence of infrared divergences. However, this separation, as usually performed, introduces spurious large-distance effects that produce an apparent breakdown of the important correspondence between stable particles and poles of the S-matrix, and, consequently, lead to apparent violations of the correspondence principle and to incorrect results for computations in the mesoscopic domain lying between the atomic and classical regimes. An improved computational technique is described that allows valid results to be obtained in this domain, and that leads, for the quantum remainder, in the cases studied, to a physical-region singularity structure that, as regards the most singular parts, is the same as the normal physical-region analytic structure in theories in which all particles have non-zero mass. The key innovations are to define the classical part in coordinate space, rather than in momentum space, and to define there a separation of the photon-electron coupling into its classical and quantum parts that has the following properties: (1) The contributions from the terms containing only classical couplings can be summed to all orders to give a unitary operator that generates the coherent state that corresponds to the appropriate classical process, and (2) The quantum remainder can be rigorously shown to exhibit, as regards its most singular parts, the normal analytic structure. (orig.)

  5. π π scattering by pole extrapolation methods

    International Nuclear Information System (INIS)

    Lott, F.W. III.

    1977-01-01

    A 25-inch hydrogen bubble chamber was used at the Lawrence Berkeley Laboratory Bevatron to produce 300,000 pictures of π + p interactions at an incident momentum of the π + of 2.67 GeV/c. The 2-prong events were processed using the FSD and the FOG-CLOUDY-FAIR data reduction system. Events of the nature π + p → π + pπ 0 and π + p → π + π + n with values of momentum transfer to the proton of -t less than or equal to 0.238 GeV 2 were selected. These events were used to extrapolate to the pion pole (t = m/sub π/ 2 ) in order to investigate the π π interaction with isospins of both T = 1 and T = 2. Two methods were used to do the extrapolation: the original Chew-Low method developed in 1959 and the Durr-Pilkuhn method developed in 1965 which takes into account centrifugal barrier penetration factors. At first it seemed that, while the Durr-Pilkuhn method gave better values for the total π π cross section, the Chew-Low method gave better values for the angular distribution. Further analysis, however, showed that if the requirement of total OPE (one-pion-exchange) were dropped, then the Durr-Pilkuhn method gave more reasonable values of the angular distribution as well as for the total π π cross section

  6. The North Celestial Pole Monitoring Project

    Science.gov (United States)

    Blake, R. M.; Castelaz, M.; Phillips, J.

    2005-05-01

    In the past ten years a renaissance has occurred in the study of transient phenomena using small, dedicated optical telescopes. This has largely been driven by the successful detection of planetary transits with small telescopes (Henry et al. 2000) and the successful recovery of optical afterglows of gamma ray bursts (e.g. Halpern et al. 1997). The telescopes involved are designed to slew at rapid rates accurately across the sky when a burst alert occurs, or to study a single patch of sky to detect transits. We have constructed a dedicated robotic instrument to monitor the region within 4 degrees of the north celestial pole continuously every clear night. Using a sequence of short and long exposures the telescope collects data to conduct searches for transient and variable objects and monitor the Cepheid variable Polaris. Previous authors (Kamper et al. 1984; Evans et al. 1998) have observed Polaris to nearly cease its pulsation, a unique behavior for a Cepheid variable. Monitoring Polaris with high secular coverage should help explain this behavior. We describe here the design of the observatory, its operation and control systems and give preliminary examples of the data products from this unique project.

  7. Study on Pole Arrangement of the CEDM Coils

    International Nuclear Information System (INIS)

    Park, Jin Seok; Lee, Myoung Goo; Kim, Hyun Min; Cho, Yeon Ho; Choi, Taek Sang

    2013-01-01

    The coil stack assembly is important for reliable operation of the CEDM, there have been efforts to improve the design by optimizing the design parameters such as dimensions and winding turns. However, magnetic forces of the CEDM can also change by different pole arrangement even if their design parameters are the same. Since the latch coil and lift coil are installed connected to each other, they produce magnetically coupled field when they are energized at the same time. This coupling field can affect the magnetic force of the CEDM significantly. In this paper, coil pole arrangement effects are studied. Electro-magnetic analysis is performed for the different pole arrangements of the CEDM coils to calculate the magnetic forces. Pole arrangement effects on magnetic forces were studied by static analysis of the CEDM magnetic field. Magnetic forces were calculated and compared for the two different pole arrangements of the coils. The results show that the magnetic poles of the lift coil and latch coil shall be arranged to have the same magnetic pole direction to achieve higher magnetic force

  8. Evidence of Space-Charge Effects in Thermal Poling

    DEFF Research Database (Denmark)

    Wu, X.; Arentoft, Jesper; Wong, D.

    1999-01-01

    The in situ thermal poling processes in germanosilicate fibers for positive and negative poling voltages are significantly different. Thermal poling of silica fibers consists of two processes: the faster linear process of charge migration and the subsequent single exponential process of charge...... ionization. Both the shielding electrical field due to charge migration and the ionization electrical field due to charge ionization are able to be frozen-in at room temperature acid lead to the residual linear electrooptic effects, The observations support that the mechanism of the induced electrooptic...... effects is based on space charge electrical fields instead of dipole/bond orientation....

  9. PopZ identifies the new pole, and PodJ identifies the old pole during polar growth in Agrobacterium tumefaciens.

    Science.gov (United States)

    Grangeon, Romain; Zupan, John R; Anderson-Furgeson, James; Zambryski, Patricia C

    2015-09-15

    Agrobacterium tumefaciens elongates by addition of peptidoglycan (PG) only at the pole created by cell division, the growth pole, whereas the opposite pole, the old pole, is inactive for PG synthesis. How Agrobacterium assigns and maintains pole asymmetry is not understood. Here, we investigated whether polar growth is correlated with novel pole-specific localization of proteins implicated in a variety of growth and cell division pathways. The cell cycle of A. tumefaciens was monitored by time-lapse and superresolution microscopy to image the localization of A. tumefaciens homologs of proteins involved in cell division, PG synthesis and pole identity. FtsZ and FtsA accumulate at the growth pole during elongation, and improved imaging reveals FtsZ disappears from the growth pole and accumulates at the midcell before FtsA. The L,D-transpeptidase Atu0845 was detected mainly at the growth pole. A. tumefaciens specific pole-organizing protein (Pop) PopZAt and polar organelle development (Pod) protein PodJAt exhibited dynamic yet distinct behavior. PopZAt was found exclusively at the growing pole and quickly switches to the new growth poles of both siblings immediately after septation. PodJAt is initially at the old pole but then also accumulates at the growth pole as the cell cycle progresses suggesting that PodJAt may mediate the transition of the growth pole to an old pole. Thus, PopZAt is a marker for growth pole identity, whereas PodJAt identifies the old pole.

  10. Characterization of Periodically Poled Nonlinear Materials Using Digital Image Processing

    National Research Council Canada - National Science Library

    Alverson, James R

    2008-01-01

    .... A new approach based on image processing across an entire z+ or z- surface of a poled crystal allows for better quantification of the underlying domain structure and directly relates to device performance...

  11. POLE mutations in families predisposed to cutaneous melanoma

    DEFF Research Database (Denmark)

    Aoude, Lauren G; Heitzer, Ellen; Johansson, Peter

    2015-01-01

    Germline mutations in the exonuclease domain of POLE have been shown to predispose to colorectal cancers and adenomas. POLE is an enzyme involved in DNA repair and chromosomal DNA replication. In order to assess whether such mutations might also predispose to cutaneous melanoma, we interrogated...... whole-genome and exome data from probands of 34 melanoma families lacking pathogenic mutations in known high penetrance melanoma susceptibility genes: CDKN2A, CDK4, BAP1, TERT, POT1, ACD and TERF2IP. We found a novel germline mutation, POLE p.(Trp347Cys), in a 7-case cutaneous melanoma family....... Functional assays in S. pombe showed that this mutation led to an increased DNA mutation rate comparable to that seen with a Pol ε mutant with no exonuclease activity. We then performed targeted sequencing of POLE in 1243 cutaneous melanoma cases and found that a further ten probands had novel or rare...

  12. New tilted-poles Wien filter with enhanced performance

    Science.gov (United States)

    Leal-Quiros, E.; Prelas, M. A.

    1989-03-01

    The Wien filter is an E×B deflecting analyzer with the electrostatic field perpendicular to the magnetostatic field. The twofold functions of the Wien filter are as an energy analyzer as well as a mass analyzer. It has very high resolution for paraxial charged-particle beams with V=E/B, the Wien velocity. Two Wien filters, a tilted-poles Wien filter, and a classical parallel-rectangular-poles Wien filter were built and tested for electrons up to 3.5 keV and protons beams of 200 eV. (The tilted-poles Wien filter is a new diagnostic developed by the authors.) The performance of the two is compared, and the tilted-poles Wien filter has superior resolution to the classical Wien filter. Both Wien filters appear to have features useful for high-temperature plasma diagnostics, including simultaneous measurement of energy and mass spectra, and high resolution.

  13. New tilted-poles Wien filter with enhanced performance

    Energy Technology Data Exchange (ETDEWEB)

    Leal-Quiros, E.; Prelas, M.A.

    1989-03-01

    The Wien filter is an E x B deflecting analyzer with the electrostatic field perpendicular to the magnetostatic field. The twofold functions of the Wien filter are as an energy analyzer as well as a mass analyzer. It has very high resolution for paraxial charged-particle beams with V = E/B, the Wien velocity. Two Wien filters, a tilted-poles Wien filter, and a classical parallel-rectangular-poles Wien filter were built and tested for electrons up to 3.5 keV and protons beams of 200 eV. (The tilted-poles Wien filter is a new diagnostic developed by the authors.) The performance of the two is compared, and the tilted-poles Wien filter has superior resolution to the classical Wien filter. Both Wien filters appear to have features useful for high-temperature plasma diagnostics, including simultaneous measurement of energy and mass spectra, and high resolution.

  14. Pacific Albacore Troll and Pole-and-line Fisheries

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The North Pacific and South Pacific Albacore Troll and Pole-and-line Fisheries project contains landings, logbooks, and size composition data from U.S.A. troll and...

  15. Micrometeorites from the South Pole Water Well, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — Micrometeorites dated between 1100 A.D. to 1500 A.D. were collected from the bottom of the South Pole Water Well in December 1995. Element analyses of 181 cosmic...

  16. Detection of Cavities Using Pole-Dipole Resistivity Technique

    OpenAIRE

    Elawadi, Eslam; El-Qady, Gad; Salem, Ahmed; Ushijima, Keisuke

    2001-01-01

    Using pole-dipole array, electrical resistivity survey was conducted to investigate the subsurface under a subsiding building located in Kita Kyushu area, Japan. The resistivity measurements were acquired along two traverse lines and interpreted using a g

  17. Methane Isotopes in South Pole Firn Air, 2008, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains depth profiles for delta carbon-13 (δ13C) and delta deuterium (δD) of methane (CH4) in South Pole firn air. The investigators obtained air...

  18. South Pole Snow Pit, 1988 and 1989, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — Information from 6-meter snow pits dug close to the South Pole in austral summer 1988-1989 by the Glacier Research Group of the University of New Hampshire (location...

  19. Dynamic Electromechanical Characterization of Axially Poled PZT 95/5

    International Nuclear Information System (INIS)

    Chhabildas, Lalit C.; Furnish, Michael D.; Montgomery, Stephen T.; Setchell, Robert E.

    1999-01-01

    We are conducting a comprehensive experimental study of the electromechanical behavior of poled PZT 95/5 (lead zirconate titanate). As part of this study, eight plane-wave tests have been conducted on axially poled PZT 95/5 at stress levels ranging from 0.9 to 4.6 GPa, using VISAR and electrical diagnostics. Observed wave velocities were slightly decreased from ultrasonic velocity, by contrast' with unpoled samples. Compression waveforms show a step at 0.6 GPa more marked than for normally poled or unpoled samples; this may correspond to a poling effect on the ferroelectric/antiferroelectric transition. A similar step is observed on release. The released charge upon loading to 0.9 GPa is consistent with nearly complete depoling. Loading to higher stresses gave lower currents (factor of 10), suggesting shock-induced conductivity or electrical breakdown

  20. Multijet final states: exact results and the leading pole approximation

    International Nuclear Information System (INIS)

    Ellis, R.K.; Owens, J.F.

    1984-09-01

    Exact results for the process gg → ggg are compared with those obtained using the leading pole approximation. Regions of phase space where the approximation breaks down are discussed. A specific example relevant for background estimates to W boson production is presented. It is concluded that in this instance the leading pole approximation may underestimate the standard QCD background by more than a factor of two in certain kinematic regions of physical interest

  1. Second-harmonic scanning optical microscopy of poled silica waveguides

    DEFF Research Database (Denmark)

    Pedersen, Kjeld; Bozhevolnyi, Sergey I.; Arentoft, Jesper

    2000-01-01

    Second-harmonic scanning optical microscopy (SHSOM) is performed on electric-field poled silica-based waveguides. Two operation modes of SHSOM are considered. Oblique transmission reflection and normal reflection modes are used to image the spatial distribution of nonlinear susceptibilities...... and limitations of the two operation modes when used for SHSOM studies of poled silica-based waveguides are discussed. The influence of surface defects on the resulting second-harmonic images is also considered. ©2000 American Institute of Physics....

  2. Sequence Classification: 893713 [

    Lifescience Database Archive (English)

    Full Text Available TMB Non-TMH Non-TMB TMB Non-TMB Non-TMB >gi|6325133|ref|NP_015201.1| Inner plaque s...pindle pole body (SPB) component, links the central plaque component Spc42p to the inner plaque component Sp

  3. International Youth Conference on the Poles

    Science.gov (United States)

    Church, A. K.; Kuhn, T. S.; Baeseman, J.; Garmulewicz, A.; Raymond, M.; Salmon, R.

    2006-12-01

    The International Polar Year (IPY) is an international effort, involving more than 50 countries, to focus research in both the sciences and social sciences on the world's Polar Regions. In order to secure youth involvement in the IPY, the Youth Steering Committee (YSC) has been formed, aiming specifically to network young polar researchers from all backgrounds enabling collaboration and to involve this group in outreach focused towards other young people. A conference targeted directly at an audience of early career researchers and international youth will be central to fulfilling these aims. The YSC has therefore developed the concept of the International Youth Conference on the Poles (IYCP). Proposed for 2008, this conference will bring together youth from a diverse set of backgrounds and nationalities to discuss the issues affecting the Polar Regions, their effects on a global scale and ways of addressing these issues. The conference will also serve to highlight ongoing IPY research, especially research being undertaken by young researchers, and provide a perennial framework for youth involvement in polar research and policies. The IYCP will run for three days in May 2008, attracting an international youth audience, as well as representatives from polar organizations, teachers, politicians, policy makers, the general public and media. The IYCP will be divided into three sections. Youth Roundtable Discussions will bring youth together to discuss issues affecting the Polar Regions and potential solutions to these. A Young Researchers Conference will provide the opportunity for young researchers working in the Polar Regions to present their work to an interdisciplinary audience. The Polar Fair will provide an interactive environment for youth to learn about the Polar Regions. The IYCP will be of great importance to the IPY because it will serve as the principle venue during the Polar Year where youth from many different disciplines, backgrounds and countries will

  4. Cytoarchitecture, probability maps and functions of the human frontal pole.

    Science.gov (United States)

    Bludau, S; Eickhoff, S B; Mohlberg, H; Caspers, S; Laird, A R; Fox, P T; Schleicher, A; Zilles, K; Amunts, K

    2014-06-01

    The frontal pole has more expanded than any other part in the human brain as compared to our ancestors. It plays an important role for specifically human behavior and cognitive abilities, e.g. action selection (Kovach et al., 2012). Evidence about divergent functions of its medial and lateral part has been provided, both in the healthy brain and in psychiatric disorders. The anatomical correlates of such functional segregation, however, are still unknown due to a lack of stereotaxic, microstructural maps obtained in a representative sample of brains. Here we show that the human frontopolar cortex consists of two cytoarchitectonically and functionally distinct areas: lateral frontopolar area 1 (Fp1) and medial frontopolar area 2 (Fp2). Based on observer-independent mapping in serial, cell-body stained sections of 10 brains, three-dimensional, probabilistic maps of areas Fp1 and Fp2 were created. They show, for each position of the reference space, the probability with which each area was found in a particular voxel. Applying these maps as seed regions for a meta-analysis revealed that Fp1 and Fp2 differentially contribute to functional networks: Fp1 was involved in cognition, working memory and perception, whereas Fp2 was part of brain networks underlying affective processing and social cognition. The present study thus disclosed cortical correlates of a functional segregation of the human frontopolar cortex. The probabilistic maps provide a sound anatomical basis for interpreting neuroimaging data in the living human brain, and open new perspectives for analyzing structure-function relationships in the prefrontal cortex. The new data will also serve as a starting point for further comparative studies between human and non-human primate brains. This allows finding similarities and differences in the organizational principles of the frontal lobe during evolution as neurobiological basis for our behavior and cognitive abilities. Copyright © 2013 Elsevier Inc. All

  5. Efficacy of the lithotripsy in treating lower pole renal stones.

    Science.gov (United States)

    Cui, Helen; Thomee, Eeke; Noble, Jeremy G; Reynard, John M; Turney, Benjamin W

    2013-06-01

    Use of extracorporeal lithotripsy is declining in North America and many European countries despite international guidelines advocating it as a first-line therapy. Traditionally, lithotripsy is thought to have poor efficacy at treating lower pole renal stones. We evaluated the success rates of lithotripsy for lower pole renal stones in our unit. 50 patients with lower pole kidney stones ≤15 mm treated between 3/5/11 and 19/4/12 were included in the study. Patients received lithotripsy on a fixed-site Storz Modulith SLX F2 lithotripter according to a standard protocol. Clinical success was defined as stone-free status or asymptomatic clinically insignificant residual fragments (CIRFs) ≤3 mm at radiological follow-up. The mean stone size was 7.8 mm. The majority of stones (66 %) were between 5 and 10 mm. 28 % of stones were between 10 and 15 mm. For solitary lower pole stones complete stone clearance was achieved in 63 %. Total stone clearance including those with CIRFs was achieved in 81 % of patients. As expected, for those with multiple lower pole stones the success rates were lower: complete clearance was observed in 39 % and combined clearance including those with CIRFs was 56 %. Overall, complete stone clearance was observed in 54 % of patients and clearance with CIRFs was achieved in 72 % of patients. Success rate could not be attributed to age, stone size or gender. Our outcome data for the treatment of lower pole renal stones (≤15 mm) compare favourably with the literature. With this level of stone clearance, a non-invasive, outpatient-based treatment like lithotripsy should remain the first-line treatment option for lower pole stones. Ureteroscopy must prove that it is significantly better either in terms of clinical outcome or patient satisfaction to justify replacing lithotripsy.

  6. Optimal pole shifting controller for interconnected power system

    International Nuclear Information System (INIS)

    Yousef, Ali M.; Kassem, Ahmed M.

    2011-01-01

    Research highlights: → Mathematical model represents a power system which consists of synchronous machine connected to infinite bus through transmission line. → Power system stabilizer was designed based on optimal pole shifting controller. → The system performances was tested through load disturbances at different operating conditions. → The system performance with the proposed optimal pole shifting controller is compared with the conventional pole placement controller. → The digital simulation results indicated that the proposed controller has a superior performance. -- Abstract: Power system stabilizer based on optimal pole shifting is proposed. An approach for shifting the real parts of the open-loop poles to any desired positions while preserving the imaginary parts is presented. In each step of this approach, it is required to solve a first-order or a second-order linear matrix Lyapunov equation for shifting one real pole or two complex conjugate poles, respectively. This presented method yields a solution, which is optimal with respect to a quadratic performance index. The attractive feature of this method is that it enables solutions of the complex problem to be easily found without solving any non-linear algebraic Riccati equation. The present power system stabilizer is based on Riccati equation approach. The control law depends on finding the feedback gain matrix, and then the control signal is synthesized by multiplying the state variables of the power system with determined gain matrix. The gain matrix is calculated one time only, and it works over wide range of operating conditions. To validate the power of the proposed PSS, a linearized model of a simple power system consisted of a single synchronous machine connected to infinite bus bar through transmission line is simulated. The studied power system is subjected to various operating points and power system parameters changes.

  7. Analysis of car’s frontal collision against pole

    Science.gov (United States)

    Ispas, N.; Nastasoiu, M.

    2017-10-01

    Reducing the effects of traffic accidents over the occupants is a major objective of collision attempts. Impacts between the car and the pole are very dangerous for the physical integrity of the car’s occupants. To minimalize the effects of such events on the passengers of a vehicle, a whole series of efforts by both designers and experienced engineers led to increasingly the vehicles safety. The main aim of these paper is to quantify the influences over the car passengers of loads involved by car against pole collisions using the same car model at different speeds. Also, this kind on occupant influences were study using a small car model. Other goal of the paper was the study of the cars stiffness in frontal collision against the pole. The paper’s experimental results were obtained by support of DSD, Dr. Steffan Datentechnik GmbH - Linz, Austria. The described tests were performed in full test facility of DSD Linz, in “Easter 2016 PC-Crash Seminar”. Cars accelerations, velocities, rotations angles after pole impact were registered and discussed. The novelty of the paper consists in studies referred for the same car model involved in car against pole collisions at different impact speeds. Paper’s conclusions can be future used for car safety improvement.

  8. Poles in the Dutch Cape Colony 1652-1814

    Directory of Open Access Journals (Sweden)

    Kowalski Mariusz

    2015-06-01

    Full Text Available The contribution of Poles to the colonisation and development of the Dutch Cape Colony is not commonly known. Yet, Poles have been appearing in this colony since its very inception (1652. During the entire period considered here the presence of Poles was the result of the strong economic ties between Poland and the Netherlands. At the end of this period there was an increase in their share, in connection with the presence of numerous alien military units on the territory of the Colony, because of Poles having served in these units. Numerous newcomers from Poland settled in South Africa for good, established families, and their progeny made up part of the local society. The evidence of this phenomenon is provided by the present-day Afrikaner families of, for instance, Drotsky, Kitshoff, Kolesky, Latsky, Masuriek, Troskie, Zowitsky, and others. A quite superficial estimation implies that the settlers coming from Poland could make up a bit over 1% of the ancestors of the present-day Afrikaners. Poles would also participate in the pioneering undertakings within the far-off fringes of the Colony, including the robbery-and-trade expedition of 1702.

  9. Assessment of Pole Erosion in a Magnetically Shielded Hall Thruster

    Science.gov (United States)

    Mikellides, Ioannis G.; Ortega, Alejandro L.

    2014-01-01

    Numerical simulations of a 6-kW laboratory Hall thruster called H6 have been performed to quantify the erosion rate at the inner pole. The assessments have been made in two versions of the thruster, namely the unshielded (H6US) and magnetically shielded (H6MS) configurations. The simulations have been performed with the 2-D axisymmetric code Hall2De which employs a new multi-fluid ion algorithm to capture the presence of low-energy ions in the vicinity of the poles. It is found that the maximum computed erosion rate at the inner pole of the H6MS exceeds the measured rate of back-sputtered deposits by 4.5 times. This explains only part of the surface roughening that was observed after a 150-h wear test, which covered most of the pole area exposed to the plasma. For the majority of the pole surface the computed erosion rates are found to be below the back-sputter rate and comparable to those in the H6US which exhibited little to no sputtering in previous tests. Possible explanations for the discrepancy are discussed.

  10. Electromagnetic Radial Forces in a Hybrid Eight-Stator-Pole, Six-Rotor-Pole Bearingless Switched-Reluctance Motor

    Science.gov (United States)

    Morrison, Carlos R.; Siebert, Mark W.; Ho, Eric J.

    2007-01-01

    Analysis and experimental measurement of the electromagnet force loads on the hybrid rotor in a novel bearingless switched-reluctance motor (BSRM) have been performed. A BSRM has the combined characteristics of a switched-reluctance motor and a magnetic bearing. The BSRM has an eight-pole stator and a six-pole hybrid rotor, which is composed of circular and scalloped lamination segments. The hybrid rotor is levitated using only one set of stator poles. A second set of stator poles imparts torque to the scalloped portion of the rotor, which is driven in a traditional switched reluctance manner by a processor. Analysis was done for nonrotating rotor poles that were oriented to achieve maximum and minimum radial force loads on the rotor. The objective is to assess whether simple one-dimensional magnetic circuit analysis is sufficient for preliminary evaluation of this machine, which may exhibit strong three-dimensional electromagnetic field behavior. Two magnetic circuit geometries, approximating the complex topology of the magnetic fields in and around the hybrid rotor, were employed in formulating the electromagnetic radial force equations. Reasonable agreement between the experimental results and the theoretical predictions was obtained with typical magnetic bearing derating factors applied to the predictions.

  11. Traumatic amputation of the left lower renal pole in children

    Energy Technology Data Exchange (ETDEWEB)

    Waxman, J.; Belman, A.B.; Kass, E.J.

    1985-07-01

    Four children between 5 and 10 years old suffered traumatic amputation of the left lower renal pole following flank trauma. All patients were evaluated with excretory urography and isotope renography. The renal scan clearly demonstrated failure of perfusion of the lower renal pole and urinary extravasation, and was believed to be more valuable than the standard excretory urogram as a diagnostic tool. All children were managed similarly: delayed (72 to 96 hours) exploration, simple removal of the amputated segment and insertion of a Penrose drain. They all have done well. The patients were normotensive at followup and had excellent function of the remaining portion of the kidney.

  12. Multiobjective H2/H? Control Design with Regional Pole Constraints

    Directory of Open Access Journals (Sweden)

    Junaidi Junaidi

    2012-03-01

    Full Text Available This paper presents multiobjective H2/H? control design with regional pole constraints. The state feedback gain can be obtained by solving a linear matrix inequality (LMI feasibility problem that robustly assigns the closed-loop poles in a prescribed LMI region. The proposed technique is illustrated with applications to the design of stabilizer for a typical single-machine infinite-bus (SMIB power system. The LMI-based control ensures adequate damping for widely varying system operating conditions. The simulation results illustrate the effectiveness and robustness of the proposed stabilizer.

  13. Induction Motor with Switchable Number of Poles and Toroidal Winding

    Directory of Open Access Journals (Sweden)

    MUNTEANU, A.

    2011-05-01

    Full Text Available This paper presents a study of an induction motor provided with toroidal stator winding. The ring-type coils offer a higher versatility in obtaining a different number of pole pairs by means of delta/star and series/parallel connections respectively. As consequence, the developed torque can vary within large limits and the motor can be utilized for applications that require, for example, high load torque values for a short time. The study involves experimental tests and FEM simulation for an induction machine with three configurations of pole pairs. The conclusions attest the superiority of the toroidal winding for certain applications such as electric vehicles or lifting machines.

  14. Challenges of Rover Navigation at the Lunar Poles

    Science.gov (United States)

    Nefian, Ara; Deans, Matt; Bouyssounouse, Xavier; Edwards, Larry; Dille, Michael; Fong, Terry; Colaprete, Tony; Miller, Scott; Vaughan, Ryan; Andrews, Dan; hide

    2015-01-01

    Observations from Lunar Prospector, LCROSS, Lunar Reconnaissance Orbiter (LRO), and other missions have contributed evidence that water and other volatiles exist at the lunar poles in permanently shadowed regions. Combining a surface rover and a volatile prospecting and analysis payload would enable the detection and characterization of volatiles in terms of nature, abundance, and distribution. This knowledge could have impact on planetary science, in-situ resource utilization, and human exploration of space. While Lunar equatorial regions of the Moon have been explored by manned (Apollo) and robotic missions (Lunokhod, Cheng'e), no surface mission has reached the lunar poles.

  15. Pedagogický odkaz Ivana Poledňáka

    OpenAIRE

    Čižinská, Klára

    2017-01-01

    The bachelor thesis covers the personality of Ivan Poledňák and his music-teaching heritage. In the first part his life, his activities in musical educational organizations and teaching at universities in the Czech Republic are described. In the second part his musical pedagogical publications are analysed. The aim of this thesis is to punctuate to his big contribution in music education. KEYWORDS Ivan Poledňák, Musically pedagogical inventiveness, Music-school-tomorrow, 40 radio lectures of ...

  16. Poles Living in Ireland and their Quality of Life

    Directory of Open Access Journals (Sweden)

    Agnieszka NOLKA

    2009-05-01

    Full Text Available The economic growth of Ireland resulted in a significant number of Poles migrating to Ireland following the EU enlargement in 2004. The article explores the quality of life of Poles living in Ireland. Using data from a preliminary survey conducted in 2006, several dimensions of living conditions are analysed, including interpersonal relations, material security, health and healthcare. The study shows that evaluations of almost all aspects of quality of life improved, apart from components such as healthcare and the ability to acquire help from social organisations. Also interpersonal relations, contrary to the initial assumption, were enhanced by migration to Ireland.

  17. Is it possible to reduce the knee joint compression force during level walking with hiking poles?

    DEFF Research Database (Denmark)

    Jensen, S B; Henriksen, M; Aaboe, J

    2010-01-01

    Walking with hiking poles has become a popular way of exercising. Walking with poles is advocated as a physical activity that significantly reduces the loading of the hip, knee and ankle joints. We have previously observed that pole walking does not lead to a reduction of the load on the knee joint....... However, it is unclear whether an increased force transmitted through the poles can reduce the load on the knee joint. Thus, the purpose of the present study was to investigate if an increased load transmitted through the arms to the poles could reduce the knee joint compression force during level walking...... with poles. We hypothesized that an increased pole force would result in a reduction of the knee joint compression force. Gait analyses from 10 healthy subjects walking with poles were obtained. The pole force was measured simultaneously during the gait analyses. The knee joint compression forces were...

  18. From 'third pole' to north pole: a Himalayan origin for the arctic fox.

    Science.gov (United States)

    Wang, Xiaoming; Tseng, Zhijie Jack; Li, Qiang; Takeuchi, Gary T; Xie, Guangpu

    2014-07-22

    The 'third pole' of the world is a fitting metaphor for the Himalayan-Tibetan Plateau, in allusion to its vast frozen terrain, rivalling the Arctic and Antarctic, at high altitude but low latitude. Living Tibetan and arctic mammals share adaptations to freezing temperatures such as long and thick winter fur in arctic muskox and Tibetan yak, and for carnivorans, a more predatory niche. Here, we report, to our knowledge, the first evolutionary link between an Early Pliocene (3.60-5.08 Myr ago) fox, Vulpes qiuzhudingi new species, from the Himalaya (Zanda Basin) and Kunlun Mountain (Kunlun Pass Basin) and the modern arctic fox Vulpes lagopus in the polar region. A highly hypercarnivorous dentition of the new fox bears a striking resemblance to that of V. lagopus and substantially predates the previous oldest records of the arctic fox by 3-4 Myr. The low latitude, high-altitude Tibetan Plateau is separated from the nearest modern arctic fox geographical range by at least 2000 km. The apparent connection between an ancestral high-elevation species and its modern polar descendant is consistent with our 'Out-of-Tibet' hypothesis postulating that high-altitude Tibet was a training ground for cold-environment adaptations well before the start of the Ice Age. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  19. Plotter of pole figure using data from x-ray diffraction

    International Nuclear Information System (INIS)

    Lima, A.F.

    1990-01-01

    Any polycrystalline aggregate normally has a preferred crystallographic orientation, or texture which depends on its thermal and or mechanical history. Preferred orientation is best described by means of a pole figure. A pole figure is a stereographic projection which shows the variation in pole density with pole orientation, for a selected set of crystal planes. In this work, computer programs was developed to plot pole figures. The corrected intensities are calculated and directly transmitted to the plotter. The different intensities levels are represented by different colors in the pole figure. (author)

  20. Liz Taylor : minu van Gogh pole natsidele kuulunud

    Index Scriptorium Estoniae

    2004-01-01

    Elizabeth Taylor palus kohtult otsust, et talle kuuluvat 15 miljonit dollarit maksvat Vincent van Goghi maali "Vaade Saint-Remy varjupaigale" pole natsid Margarete Mauthneri juudiperekonna käest vägivaldselt ära võtnud. E. Taylori isa ostis maali 1963. a. Londonis oksjonilt

  1. Analytical signal and reduction to pole in the interpretation of ...

    African Journals Online (AJOL)

    Analytical signal and reduction to pole in the interpretation of aeromagnetic data at low magnetic latitudes: a case study of the middle Benue trough, Nigeria. OK Likkason. Abstract. No Abstract. Global Journal of Geological Sciences Vol. 4(1) 2006: 29-38. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL ...

  2. Finite element analysis of boron diffusion in wooden Poles

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl

    2004-01-01

    The problem of describing the migration of dissolved boron in wood is treated with special reference to the commonly used remedial treatment of wooden poles. The governing equations are derived and discussed together with some of the material parameters required. The equations are solved...

  3. Probability models of the x, y pole coordinates data

    Science.gov (United States)

    Sen, A.; Niedzielski, T.; Kosek, W.

    2008-12-01

    The aim of this study is to find the most appropriate probabilistic model for the x, y pole coordinates time series. We have analyzed the IERS eopc04_05 data set covering the period 1962 - 2008. We have also considered the residual x, y pole coordinate time series, which is computed as the difference between the original data and the corresponding least-squares model of the Chandler circle and annual ellipse. Using the measures of skewness and kurtosis of the empirical distribution of the data, we find that the x, y pole coordinates and the corresponding residuals time series cannot be modeled by a normal (Gaussian) distribution. A normal distribution has zero skewness and a kurtosis value of 3. We have fitted several non- Gaussian distributions to the datasets. They include the Generalized Extreme Value distribution, 4-parameter Beta distribution, Johnson SB and SU distributions, Generalized Pareto distribution and Wakeby distribution. Suitability of these distributions as probabilistic models for the x, y pole coordinates and the corresponding residuals time series are discussed.

  4. Bacterial diversity in snow on North Pole ice floes

    DEFF Research Database (Denmark)

    Hauptmann, Aviaja Zenia Edna Lyberth; Stibal, Marek; Bælum, Jacob

    2014-01-01

    The microbial abundance and diversity in snow on ice floes at three sites near the North Pole was assessed using quantitative PCR and 454 pyrosequencing. Abundance of 16S rRNA genes in the samples ranged between 43 and 248 gene copies per millilitre of melted snow. A total of 291,331 sequences we...

  5. Particles as S-matrix poles: hadron democracy

    International Nuclear Information System (INIS)

    Chew, G.F.

    1989-01-01

    The connection between two theoretical ideas of the 1950s is traced in this article, namely that hadrons are nonfundamental, ''composite'' particles and that all physically observable particles correspond to singularities of an analytic scattering matrix. The S matrix theory developed by Werner Heisenberg in the early forties now incorporated the concepts of unitarity, invariance, analyticity and causality. The meson-exchange force meant that poles must be present in nucleon-nuclear and pion-nucleon scattering as predicted by dispersion relations. Experimental work in accessible regions determined pole residues. Pole residue became associated with force strength and pole position with particle mass. In 1959, the author discovered the so-called ''bootstrap'' theory the rho meson as a force generates a rho particle. By the end of the 1950s it was clear that all hadrons had equal status, each being bound states of other hadrons, sustained by hadron exchange forces and that hadrons are self-generated by an S-matrix bootstrap mechanism that determines all their properties. (UK)

  6. Finite Element Analysis of Boron Diffusion in Wooden Poles

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, P.; Bechgaard, C.

    2003-01-01

    The problem of describing the migration of dissolved boron in wood is treated with special reference to the commonly used remedial treatment of wooden poles. The governing equations are derived and discussed together with some of the material parameters required. The equations are solved by the f...... by the finite element method and, finally, results showing the effect of different treatment strategies are presented....

  7. Finite element analysis of boron diffusion in wooden Poles

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl

    2004-01-01

    The problem of describing the migration of dissolved boron in wood is treated with special reference to the commonly used remedial treatment of wooden poles. The governing equations are derived and discussed together with some of the material parameters required. The equations are solved by the f...... by the finite element method and, finally, results showing the effect of different treatment strategies are presented....

  8. Finite Element Analysis of Boron Diffusion in Wooden Poles

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl

    2004-01-01

    The problem of describing the migration of dissolved boron in wood is treated with special reference to the commonly used remedial treatment of wooden poles. The governing equations are derived and discussed together with some of the material parameters required. The equations are solved by the f...... by the finite element method and, finally, results showing the effect of different treatment strategies are presented....

  9. USA valitsus: Tallinna linnahalli miljardigarantiid pole olemas / Raimo Poom

    Index Scriptorium Estoniae

    Poom, Raimo

    2010-01-01

    USA Eesti-saatkonna teatel pole USA valitsus andnud garantiid mitte ühelegi projektile Tallinnas. Tallinna abilinnapea Taavi Aasa sõnul ei saa USA garantiist teha juttu enne, kui Eesti valitsus selle omakorda garanteerib. Taavi Aasa kirjast rahandusminister Jürgen Ligile

  10. An estimate on the purely imaginary poles of scattering matrix

    International Nuclear Information System (INIS)

    Bozhkov, Y.D.

    1988-12-01

    In this work we obtain two estimates (upper and lower) on the number of purely imaginary poles of the scattering matrix for the wave equation in the exterior of a compact smooth obstacle in R n , n ≥ 3 odd. The method of Lax and Phillips is used. (author). 5 refs

  11. Kick, Glide, Pole! Cross-Country Skiing Fun (Part II)

    Science.gov (United States)

    Duoos, Bridget A.

    2012-01-01

    Part I of Kick, Glide, Pole! Cross-Country Skiing Fun, which was published in last issue, discussed how to select cross-country ski equipment, dress for the activity and the biomechanics of the diagonal stride. Part II focuses on teaching the diagonal stride technique and begins with a progression of indoor activities. Incorporating this fun,…

  12. Catapult effect in pole vaulting: is muscle coordination determinant?

    Science.gov (United States)

    Frère, Julien; Göpfert, Beat; Hug, François; Slawinski, Jean; Tourny-Chollet, Claire

    2012-02-01

    This study focused on the phase between the time of straightened pole and the maximum height (HP) of vaulter and aimed at determining the catapult effect in pole vaulting on HP. Seven experienced vaulters performed 5-10 vaults recorded by two video cameras, while the surface electromyography (sEMG) activity of 10 upper limbs muscles was recorded. HP was compared with an estimated maximum height (HP(est)) allowing the computation of a push-off index. Muscle synergies were extracted from the sEMG activity profiles using a non-negative matrix factorization algorithm. No significant difference (p>0.47) was found between HP(est) (4.64±0.21m) and HP (4.69±0.23m). Despite a high inter-individual variability in sEMG profiles, two muscle synergies were extracted for all the subjects which accounted for 96.1±2.9% of the total variance. While, the synergy activation coefficients were very similar across subjects, a higher variability was found in the muscle synergy vectors. Consequently, whatever the push-off index among the pole vaulters, the athletes used different muscle groupings (i.e., muscle synergy vectors) which were activated in a similar fashion (i.e., synergy activation coefficients). Overall, these results suggested that muscle coordination adopted between the time of straightened pole and the maximum height does not have a major influence on HP. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Pole solution in six dimensions as a dimensional reduction model

    Science.gov (United States)

    Ichinose, Shoichi

    2002-01-01

    A solution with the pole configuration in six dimensions is analyzed. It is a dimensional reduction model of Randall-Sundrum type. The soliton configuration is induced by the bulk Higgs mechanism. The boundary condition is systematically solved up to the 6th order. The Riemann curvature is finite everywhere.

  14. Diplodia natalensis , Pole Evans: a causal agent of citrus gummosis ...

    African Journals Online (AJOL)

    Isolations were made from the barks of gummosis-infected citrus trees from orchards of the University of Ghana Agricultural Research Station at Kade. The isolation media used were 1.5% water agar, 1.5% water agar + nystatin and 1.5% water agar + benomyl. Four isolates including Diplodia natalensis Pole Evans, ...

  15. Poled-glass devices: Influence of surfaces and interfaces

    DEFF Research Database (Denmark)

    Fage-Pedersen, Jacob; Jacobsen, Rune Shim; Kristensen, Martin

    2007-01-01

    Devices in periodically poled glass must have a large periodic variation of the built-in field. We show that the periodic variation can be severely degraded by charge dynamics taking place at the external (glass–air) interface or at internal (glass–glass) interfaces if the interfaces have imperfe...

  16. BMP regulates vegetal pole induction centres in early xenopus development.

    Science.gov (United States)

    Nachaliel, N; Re'Em-Kalma, Y; Eshed, O; Elias, S; Frank, D

    1998-10-01

    Bone morphogenetic protein (BMP) plays an important role in mesoderm patterning in Xenopus. The ectopic expression of BMP-4 protein hyperventralizes embryos, whereas embryos expressing a BMP-2/4 dominant-negative receptor (DNR) are hyperdorsalized. Mesoderm is initially induced in the marginal zone by cells in the underlying vegetal pole. While much is known about BMP's expression and role in patterning the marginal zone, little is known about its early role in regulating vegetal mesoderm induction centre formation. The role of BMP in regulating formation of vegetal mesoderm inducing centres during early Xenopus development was examined. Ectopic BMP-4 expression in vegetal pole cells inhibited dorsal mesoderm induction but increased ventral mesoderm induction when recombined with animal cap ectoderm in Nieuwkoop explants. 32-cell embryos injected with BMP-4 RNA in the most vegetal blastomere tier were not hyperdorsalized by LiCl treatment. The ectopic expression of Smad or Mix.1 proteins in the vegetal pole also inhibited dorsal mesoderm induction in explants and embryos. Expression of the BMP 2/4 DNR in the vegetal pole increased dorsal mesoderm induction and inhibited ventral mesoderm induction in explants and embryos. These results support a role for BMP signalling in regulating ventral vegetal and dorsal vegetal mesoderm induction centre formation during early Xenopus development.

  17. Carrier Phase GPS Navigation to the North Pole

    Science.gov (United States)

    Moore, T.; Roberts, G. W.

    Over the last few years, on-the-fly integer ambiguity resolution for GPS has proven to be successful over short baselines (500 km. New techniques have been developed at the University of Nottingham to allow very long baseline integer ambiguity resolution, on-the-fly. A major problem with the use of carrier phase data is that posed by cycle slips. A technique for detecting and correcting cycle slips has been developed, and its use is discussed in this paper. The new technique has been proven through a series of trials, one of which included two flights to the North Pole, performing centimetric level positioning all the way to the pole. For many years, the GD Aero-Systems Course of the Air Warfare Centre based at RAF Cranwell executed a series of equipment flight trials to the North Pole, called the ARIES Flights. In May 1996, the authors were fortunate to take part in both flights, via Iceland and Greenland, to the North Pole. Based on reference stations at Thule Air Base, integer ambiguity resolution was accomplished, on-the-fly, and centimetric level navigation maintained throughout the flights. Earlier trials detailed in the paper demonstrate that the technique can resolve integer ambiguities on-the-fly within a few seconds over a baseline length of approximately 134 km, resulting in an accuracy of 12 cm. The majority of the residual error source for this being the ionosphere.

  18. Decay resistance of out-of-service utility poles as related to the distribution of residual creosote content

    Science.gov (United States)

    Han Roliadi; Chung Y. Hse; Elvin T. Choong; Todd F. Shupe

    2000-01-01

    Decay resistance of out-of-service poles was investigated to evaluate their effectiveness against biodegradation for possible recycling of these poles for composite products. Decay resistance was related to creosote content and creosote distribution in poles with service durations of 5 and 25 years and also freshly treated poles. Weathering of the poles had caused...

  19. Inferior patellar pole fragmentation in children: just a normal variant?

    Energy Technology Data Exchange (ETDEWEB)

    Kan, J.H.; Vogelius, Esben S.; Orth, Robert C.; Guillerman, R.P.; Jadhav, Siddharth P. [Texas Children' s Hospital, E.B. Singleton Pediatric Radiology, Houston, TX (United States)

    2015-06-15

    Fragmentary ossification of the inferior patella is often dismissed as a normal variant in children younger than 10 years of age. The purpose of this study was to determine whether fragmentary inferior patellar pole ossification is a normal variant or is associated with symptoms or signs of pathology using MRI and clinical exam findings as reference. A retrospective review was performed on 150 patients ages 5-10 years who underwent 164 knee radiography and MRI exams (45.1% male, mean age: 7.8 years). The presence or absence of inferior patellar pole fragmentation on radiography was correlated with the presence or absence of edema-like signal on MR images. Clinical notes were reviewed for the presence of symptoms or signs referable to the inferior patellar pole. These data were compared with a 1:1 age- and sex-matched control group without inferior pole fragmentation. Statistical analysis was performed using two-tailed t-tests. Forty of 164 (24.4%) knee radiographs showed fragmentary ossification of the inferior patella. Of these 40 knees, 62.5% (25/40) had edema-like signal of the inferior patellar bone marrow compared with 7.5% (3/40) of controls (P = 0.035). Patients with fragmentary ossification at the inferior patella had a significantly higher incidence of documented focal inferior patellar pain compared with controls (20% vs. 2.5%, P = 0.015). Inferior patellar pole fragmentation in children 5 to 10 years of age may be associated with localized symptoms and bone marrow edema-like signal and should not be routinely dismissed as a normal variant of ossification. (orig.)

  20. Bycatch in the Maldivian pole-and-line tuna fishery.

    Science.gov (United States)

    Miller, Kelsey I; Nadheeh, Ibrahim; Jauharee, A Riyaz; Anderson, R Charles; Adam, M Shiham

    2017-01-01

    Tropical tuna fisheries are among the largest worldwide, with some having significant bycatch issues. However, pole-and-line tuna fisheries are widely believed to have low bycatch rates, although these have rarely been quantified. The Maldives has an important pole-and-line fishery, targeting skipjack tuna (Katsuwonus pelamis). In the Maldives, 106 pole-and-line tuna fishing days were observed between August 2014 and November 2015. During 161 fishing events, tuna catches amounted to 147 t: 72% by weight was skipjack, 25% yellowfin tuna (Thunnus albacares) and 3% other tunas. Bycatch (all non-tuna species caught plus all tuna discards) amounted to 951 kg (0.65% of total tuna catch). Most of the bycatch (95%) was utilized, and some bycatch was released alive, so dead discards were particularly low (0.02% of total tuna catch, or 22 kg per 100 t). Rainbow runner (Elagatis bipinnulata) and dolphinfish (Coryphaena hippurus) together constituted 93% of the bycatch. Live releases included small numbers of silky sharks (Carcharhinus falciformis) and seabirds (noddies, Anous tenuirostris and A. stolidus). Pole-and-line tuna fishing was conducted on free schools and schools associated with various objects (Maldivian anchored fish aggregating devices [aFADs], drifting FADs from western Indian Ocean purse seine fisheries, other drifting objects and seamounts). Free school catches typically included a high proportion of large skipjack and significantly less bycatch. Associated schools produced more variable tuna catches and higher bycatch rates. Fishing trips in the south had significantly lower bycatch rates than those in the north. This study is the first to quantify bycatch rates in the Maldives pole-and-line tuna fishery and the influence of school association on catch composition. Ratio estimator methods suggest roughly 552.6 t of bycatch and 27.9 t of discards are caught annually in the fishery (based on 2015 national catch), much less than other Indian Ocean tuna

  1. Acute effects of flexible pole exercise on heart rate dynamics.

    Science.gov (United States)

    de Oliveira, Letícia Santana; Moreira, Patrícia S; Antonio, Ana M; Cardoso, Marco A; de Abreu, Luiz Carlos; Navega, Marcelo T; Raimundo, Rodrigo D; Valenti, Vitor E

    2015-01-01

    Exercise with flexible poles provides fast eccentric and concentric muscle contractions. Although the literature reports significant muscle chain activity during this exercise, it is not clear if a single bout of exercise induces cardiac changes. In this study we assessed the acute effects of flexible pole exercise on cardiac autonomic regulation. The study was performed on 22 women between 18 and 26 years old. We assessed heart rate variability (HRV) in the time (SDNN, RMSSD and pNN50) and frequency (HF, LF and LF/HF ratio) domains and geometric indices of HRV (RRTri, TINN, SD1, SD2 and SD1/SD2 ratio). The subjects remained at rest for 10 min and then performed the exercises with the flexible poles. Immediately after the exercise protocol, the volunteers remained seated at rest for 60 min and HRV was analyzed. We observed no significant changes in time domain (SDNN: p=0.72; RMSSD: p=0.94 and pNN50: p=0.92) or frequency domain indices (LF [nu]: p=0.98; LF [ms(2)]: p=0.72; HF [nu]: p=0.98; HF [ms(2)]: p=0.82 and LF/HF ratio: p=0.7) or in geometric indices (RRTri: p=0.54; TINN: p=0.77; SD1: p=0.94; SD2: p=0.67 and SD/SD2: p=0.42) before and after a single bout of flexible pole exercise. A single bout of flexible pole exercise did not induce significant changes in cardiac autonomic regulation in healthy women. Copyright © 2014 Sociedade Portuguesa de Cardiologia. Published by Elsevier España. All rights reserved.

  2. Wire inhomogeneity detector having a core with opposing pole pieces and guide pieces adjacent the opposing pole pieces

    International Nuclear Information System (INIS)

    Gibson, G.H.; Smits, R.G.; Eberhard, P.H.

    1989-01-01

    This patent describes a wire inhomogeneity detector assembly for detecting changes in the conductive properties of a wire as the wire is passed therethrough. It comprises: a coil assembly through which a wire containing conductive material is adapted to be pressed in a direction substantially perpendicular to a longitudinal axis of the coil assembly. The coil assembly comprising a single ferrite core having a pair of opposing pole pieces between which are an associated conductive wire to be tested is adapted to be passed, each of the pole pieces having a coil wound therearound. The coil assembly including a guide-block consisting of a pair of guide pieces mounted adjacent to ends of the opposing pole pieces for guiding an associated conductive wire between the pole pieces and for reducing stray magnetic field lines. The guide pieces being positioned closely adjacent an associated conductive wire passing therebetween; an impedance bridge adjusted to an null balance point operatively connected to the coil assembly which measures the impedance of the coil assembly and is unbalanced by changes in eddy currents generated in the coil assembly; and a filter detector alarm assembly operatively connected to an output of the impedance bridge. The filter detector alarm assembly including an input bandpass filter detector alarm assembly including an input bandpass filter operatively connected to a differential comparator, the output of which triggers an alarm

  3. Repair of impact damaged utility poles with fiber reinforced polymers (FRP), phase II : [summary].

    Science.gov (United States)

    2015-04-01

    The aluminum and steel utility poles which support traffic signals, lighting, or mast-arm signs : are vulnerable to collisions from vehicles because of proximity to roadways. Removing these : poles for repair is costly and time-consuming, and removal...

  4. Pole Shape Optimization of Permanent Magnet Synchronous Motors Using the Reduced Basis Technique

    Directory of Open Access Journals (Sweden)

    A. Jabbari

    2010-03-01

    Full Text Available In the present work, an integrated method of pole shape design optimization for reduction of torque pulsation components in permanent magnet synchronous motors is developed. A progressive design process is presented to find feasible optimal shapes. This method is applied on the pole shape optimization of two prototype permanent magnet synchronous motors, i.e., 4-poles/6-slots and 4-poles-12slots.

  5. Effect of Materials and Manufacturing on the Bending Stiffness of Vaulting Poles

    Science.gov (United States)

    Davis, C. L.; Kukureka, S. N.

    2012-01-01

    The increase in the world record height achieved in pole vaulting can be related to the improved ability of the athletes, in terms of their fitness and technique, and to the change in materials used to construct the pole. For example in 1960 there was a change in vaulting pole construction from bamboo to glass fibre reinforced polymer (GFRP)…

  6. Finite element modeling of small-scale tapered wood-laminated composite poles with biomimicry features

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; R.C. Tang; Chung Y. Hse

    2008-01-01

    Tapered composite poles with biomimicry features as in bamboo are a new generation of wood laminated composite poles that may some day be considered as an alternative to solid wood poles that are widely used in the transmission and telecommunication fields. Five finite element models were developed with ANSYS to predict and assess the performance of five types of...

  7. The Neville-Aitken formula for rational interpolants with prescribed poles

    Science.gov (United States)

    Carstensen, C.; Mühlbach, G.

    1992-12-01

    Using a polynomial description of rational interpolation with prescribed poles a simple purely algebraic proof of a Neville-Aitken recurrence formula for rational interpolants with prescribed poles is presented. It is used to compute the general Cauchy-Vandermonde determinant explicitly in terms of the nodes and poles involved.

  8. Mechanical properties of small-scale laminated wood composite poles: effects of taper and webs

    Science.gov (United States)

    Cheng Piao; Todd F. Shupe; R.C. Tang; Chung Y. Hse

    2006-01-01

    Laminated hollow wood composite poles represent an efficient utilization of the timber resource and a promising alternative for solid poles that are commonly used in the power transmission and telecommunication lines. The objective of this study was to improve the performance of composite poles by introducing the bio-mimicry concept into the design of hollow wood...

  9. Sample Return Mission to the South Pole Aitken Basin

    Science.gov (United States)

    Duke, M. B.; Clark, B. C.; Gamber, T.; Lucey, P. G.; Ryder, G.; Taylor, G. J.

    1999-01-01

    affected all of the planets of the inner solar system, and in particular, could have been critical to the history of life on Earth. If the SPA is significantly older, a more orderly cratering history may be inferred. Secondly, melt-rock compositions and clasts in melt rocks or breccias may yield evidence of the composition of the lunar mantle, which could have been penetrated by the impact or exposed by the rebound process that occurred after the impact. Thirdly, study of mare and cryptomare basalts could yield further constraints on the age of SPA and the thermal history of the crust and mantle in that region. The integration of these data may allow inferences to be made on the nature of the impacting body. Secondary science objectives in samples from the SPA could include analysis of the regolith for the latitudinal effects of solar wind irradiation, which should be reduced from its equatorial values; possible remnant magnetization of very old basalts; and evidence for Imbrium Basin ejecta and KREEP materials. If a sampling site is chosen close enough to the poles, it is possible that indirect evidence of polar-ice deposits may be found in the form of oxidized or hydrated regolith constituents. A sample return mission to the Moon may be possible within the constraints of NASA's Discovery Program. Recent progress in the development of sample return canisters for Genesis, Stardust, and Mars Sample Return missions suggests that a small capsule can be returned directly to the ground without a parachute, thus reducing its mass and complexity. Return of a 1-kg sample from the lunar surface would appear to be compatible with a Delta 11 class launch from Earth, or possibly with a piggyback opportunity on a commercial launch to GEO. A total mission price tag on the order of 100 million would be a goal. Target date would be late 2002. Samples would be returned to the curatorial facility at the Johnson Space Center for description and allocation for investigations. Concentration of

  10. Claw-pole Synchronous Generator for Compressed Air Energy Storage

    Directory of Open Access Journals (Sweden)

    PAVEL Valentina

    2013-05-01

    Full Text Available This paper presents a claw-poles generator for compressed air energy storage systems. It is presented the structure of such a system used for compensating of the intermittency of a small wind energy system. For equipping of this system it is chosen the permanent magnet claw pole synchronous generator obtained by using ring NdFeB permanentmagnets instead of excitation coil. In such a way the complexity of the scheme is reduced and the generator become maintenance free. The new magnetic flux density in the air-gap is calculated by magneticreluctance method and by FEM method and the results are compared with measured values in the old and new generator.

  11. Study of recursive model for pole-zero cancellation circuit

    International Nuclear Information System (INIS)

    Zhou Jianbin; Zhou Wei; Hong Xu; Hu Yunchuan; Wan Xinfeng; Du Xin; Wang Renbo

    2014-01-01

    The output of charge sensitive amplifier (CSA) is a negative exponential signal with long decay time which will result in undershoot after C-R differentiator. Pole-zero cancellation (PZC) circuit is often applied to eliminate undershoot in many radiation detectors. However, it is difficult to use a zero created by PZC circuit to cancel a pole in CSA output signal accurately because of the influences of electronic components inherent error and environmental factors. A novel recursive model for PZC circuit is presented based on Kirchhoff's Current Law (KCL) in this paper. The model is established by numerical differentiation algorithm between the input and the output signal. Some simulation experiments for a negative exponential signal are carried out using Visual Basic for Application (VBA) program and a real x-ray signal is also tested. Simulated results show that the recursive model can reduce the time constant of input signal and eliminate undershoot. (authors)

  12. On the ultimate uncertainty of the top quark pole mass

    Energy Technology Data Exchange (ETDEWEB)

    Beneke, M. [Technische Univ. Muenchen, Garching (Germany). Physik-Department; Marquard, P. [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Nason, P. [INFN, Sezione di Milano Bicocca (Italy); Steinhauser, M. [Karlsruher Institut fuer Technologie (Germany). Inst. fuer Theoretische Teilchenphysik

    2016-05-15

    We combine the known asymptotic behaviour of the QCD perturbation series expansion, which relates the pole mass of a heavy quark to the MS mass, with the exact series coefficients up to the four-loop order to determine the ultimate uncertainty of the top-quark pole mass due to the renormalon divergence. We perform extensive tests of our procedure by varying the number of colours and flavours, as well as the scale of the strong coupling and the MS mass, and conclude that this uncertainty is around 70 MeV. We further estimate the additional contribution to the mass relation from the five-loop correction and beyond to be 250 MeV.

  13. Development of a 10-m wedged-pole undulator

    International Nuclear Information System (INIS)

    Robinson, K.E.; Gottschalk, S.C.; James, F.E.; Quimby, D.C.; Slater, J.M.; Valla, A.S.

    1989-01-01

    A 10-m rare earth permanent magnet hybrid undulator called a near infrared scalable undulator system (NISUS) is under construction at Spectra Technology for use in the Boeing FEL program series. The design was optimized for operation at a 1-μm wavelength with the Boeing accelerator parameters. A remotely adjustable compound taper is utilized to achieve optimum startup gain and high saturated extraction. A summary of the relevant design parameters is listed. A major goal was to build NISUS from modules which would allow easy scaling to longer lengths without redesign. Prototype tests for verification of field strength and quality are complete as well as the delivery and installation of the initial 5 m. Improvements relative to the technology used in the earlier tapered hybrid undulator (THUNDER) are highlighted. The wedged-pole configuration is employed for a major increase in field strength while operating the poles farther from saturation

  14. Seasonal Evolution of Titan's Stratosphere Near the Poles

    Science.gov (United States)

    Coustenis, A.; Jennings, D. E.; Achterberg, R. K.; Bampasidis, G.; Nixon, C. A.; Lavvas, P.; Cottini, V.; Flasar, F. M.

    2018-02-01

    In this Letter, we report the monitoring of seasonal evolution near Titan’s poles. We find Titan’s south pole to exhibit since 2010 a strong temperature decrease and a dramatic enhancement of several trace species such as complex hydrocarbons and nitriles (HC3N and C6H6 in particular) previously only observed at high northern latitudes. This results from the seasonal change on Titan going from winter (2002) to summer (2017) in the north and, at the same time, the onset of winter in the south pole. During this transition period atmospheric components with longer chemical lifetimes linger in the north, undergoing slow photochemical destruction, while those with shorter lifetimes decrease and reappear in the south. An opposite effect was expected in the north, but not observed with certainty until now. We present here an analysis of high-resolution nadir spectra acquired by Cassini/Cassini Composite Infrared Spectrometer in the past years and describe the temperature and composition variations near Titan’s poles. From 2013 until 2016, the northern polar region has shown a temperature increase of 10 K, while the south has shown a more significant decrease (up to 25 K) in a similar period of time. While the south polar region has been continuously enhanced since about 2012, the chemical content in the north is finally showing a clear depletion for most molecules only since 2015. This is indicative of a non-symmetrical response to the seasons in Titan’s stratosphere that can set constraints on photochemical and GCM models.

  15. REGIONAL DEVELOPMENT THROUGH GROWTH AND URBAN DEVELOPMENT POLES IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Stefana VARVARI

    2015-09-01

    Full Text Available In 2008 the Ministry of Development, Public Works and Housing (now the Ministry of Regional Development and Public Administration prepared the growth poles policy for Romania, establishing seven growth poles to be financed through the Regional Operational Programme 2007-1013, under the Priority Axis no. 1. For 2007-2013 there were also established 11 urban development poles. At present the Ministry is discussing with the European Commission the new Regional Operational Programme 2014-2020 in which the main policy lines regarding integrated territorial development also take into consideration the improvement of the quality of life and the “appearance” of towns and strengthening their role in the region. The main urban agglomerations (county seats are seen as development engines of the regions. The authors analyze the results obtained and the problems that appeared at regional level in what concerns the projects financed under Axis 1 of the ROP 2007-2013 by answering two main questions: did they really had the estimated impact on the growth and urban development poles and on the regions? and was there really an integrated approach used? Based on the results obtained from the analysis of the previous programming period the authors try to recommend some improvements that could be taken into consideration for the development of the Integrated urban development plans and priority projects that are going to be financed by ESI funds under Axis 4 of the new ROP 2014-2020, recommendations that could be taken into consideration when preparing the Guidelines for applicants for this axis.

  16. Tööpuudus 29%, palavikku pole / Rachel Donadio

    Index Scriptorium Estoniae

    Donadio, Rachel

    2010-01-01

    Lõuna-Hispaanias asuvas Cádizis on töötus 29%, ometi pole eurotsooni kõrgeim tööpuuduse määr tekitanud linnas sügavat sotsiaalset rahutust ega massilisi proteste, sest üsna kõrge elukvaliteedi tagavad töötutele kompleksne turvavõrk, mis koosneb varimajandusest, perekonna toetusest ja valitsuse toetusest

  17. Development of a superconducting claw-pole motor

    International Nuclear Information System (INIS)

    Watanabe, E.; Kikukawa, K.; Satoh, Y.; Torii, S.

    2008-01-01

    We have developed and produced a superconducting claw-pole motor for a trial purpose as a method to make the best use of the characteristic of superconductivity without collector rings or rotating superconducting coils that need to be cryocooled, and made some examinations. The unique feature in this motor is to have the mechanism that supports the reaction magnetic force generated in the axial direction

  18. Multiple mechanisms regulate NuMA dynamics at spindle poles.

    Science.gov (United States)

    Kisurina-Evgenieva, Olga; Mack, Gary; Du, Quansheng; Macara, Ian; Khodjakov, Alexey; Compton, Duane A

    2004-12-15

    The large coiled-coil protein NuMA plays an essential role in organizing microtubule minus ends at spindle poles in vertebrate cells. Here, we use both in vivo and in vitro methods to examine NuMA dynamics at mitotic spindle poles. Using fluorescence recovery after photobleaching, we show that an exogenously expressed green-fluorescent-protein/NuMA fusion undergoes continuous exchange between soluble and spindle-associated pools in living cells. These dynamics require cellular energy and display an average half-time for fluorescence recovery of approximately 3 minutes. To explore how NuMA dynamics at spindle poles is regulated, we exploited the association of NuMA with microtubule asters formed in mammalian mitotic extracts. Using a monoclonal antibody specific for human NuMA, we followed the fate of human NuMA associated with microtubule asters upon dilution with a hamster mitotic extract. Consistent with in vivo data, this assay shows that NuMA can be displaced from the core of pre-assembled asters into the soluble pool. The half-time of NuMA displacement from asters under these conditions is approximately 5 minutes. Using this assay, we show that protein kinase activity and the NuMA-binding protein LGN regulate the dynamic exchange of NuMA on microtubule asters. Thus, the dynamic properties of NuMA are regulated by multiple mechanisms including protein phosphorylation and binding to the LGN protein, and the rate of exchange between soluble and microtubule-associated pools suggests that NuMA associates with an insoluble matrix at spindle poles.

  19. Clusters of cyclones encircling Jupiter’s poles

    Science.gov (United States)

    Adriani, A.; Mura, A.; Orton, G.; Hansen, C.; Altieri, F.; Moriconi, M. L.; Rogers, J.; Eichstädt, G.; Momary, T.; Ingersoll, A. P.; Filacchione, G.; Sindoni, G.; Tabataba-Vakili, F.; Dinelli, B. M.; Fabiano, F.; Bolton, S. J.; Connerney, J. E. P.; Atreya, S. K.; Lunine, J. I.; Tosi, F.; Migliorini, A.; Grassi, D.; Piccioni, G.; Noschese, R.; Cicchetti, A.; Plainaki, C.; Olivieri, A.; O’Neill, M. E.; Turrini, D.; Stefani, S.; Sordini, R.; Amoroso, M.

    2018-03-01

    The familiar axisymmetric zones and belts that characterize Jupiter’s weather system at lower latitudes give way to pervasive cyclonic activity at higher latitudes. Two-dimensional turbulence in combination with the Coriolis β-effect (that is, the large meridionally varying Coriolis force on the giant planets of the Solar System) produces alternating zonal flows. The zonal flows weaken with rising latitude so that a transition between equatorial jets and polar turbulence on Jupiter can occur. Simulations with shallow-water models of giant planets support this transition by producing both alternating flows near the equator and circumpolar cyclones near the poles. Jovian polar regions are not visible from Earth owing to Jupiter’s low axial tilt, and were poorly characterized by previous missions because the trajectories of these missions did not venture far from Jupiter’s equatorial plane. Here we report that visible and infrared images obtained from above each pole by the Juno spacecraft during its first five orbits reveal persistent polygonal patterns of large cyclones. In the north, eight circumpolar cyclones are observed about a single polar cyclone; in the south, one polar cyclone is encircled by five circumpolar cyclones. Cyclonic circulation is established via time-lapse imagery obtained over intervals ranging from 20 minutes to 4 hours. Although migration of cyclones towards the pole might be expected as a consequence of the Coriolis β-effect, by which cyclonic vortices naturally drift towards the rotational pole, the configuration of the cyclones is without precedent on other planets (including Saturn’s polar hexagonal features). The manner in which the cyclones persist without merging and the process by which they evolve to their current configuration are unknown.

  20. Coherence between geophysical excitations and celestial pole offsets

    Czech Academy of Sciences Publication Activity Database

    Ron, Cyril; Vondrák, Jan

    2011-01-01

    Roč. 8, č. 3 (2011), s. 243-247 ISSN 1214-9705. [Czech-Polish Workshop on Recent Geodynamics of the Sudeten and Adjacent Areas. Třešť, 04.11.2010-06.11. 2010] R&D Projects: GA ČR GA205/08/0908 Institutional research plan: CEZ:AV0Z10030501 Keywords : geophysical excitations * celestial pole offsets * coherence Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics Impact factor: 0.530, year: 2011

  1. Seasonal Evolution of Titan's South Pole 220 cm-1 Cloud

    Science.gov (United States)

    Jennings, Donald

    2016-06-01

    A cloud of ices that had been seen only in Titan's north during winter began to emerge at the south pole in 2012. Discovered by Voyager IRIS as an emission feature at 220 cm-1, the cloud has been studied extensively in both the north and south by Cassini CIRS. The spectral feature acts as a tracer of the seasonal changes at Titan's poles, relating to evolving composition, temperature structure and dynamics. Although candidates have been proposed, the chemical makeup of the cloud has never been identified. The cloud is composed of condensates derived from gases created at high altitude and transported to the cold, shadowed pole. In the north the cloud has diminished gradually over the Cassini mission as Titan has transitioned from winter to spring. The southern cloud, on the other hand, grew rapidly after 2012. By late 2014 it had developed a complex ring structure that was confined to latitudes poleward of 70°S within the deep temperature well that had formed at the south pole [1]. The location of the cloud coincides in latitude with the HCN cloud reported by ISS and VIMS [2,3]. CIRS also saw enhanced gas emissions at those latitudes [4]. When it first formed, the cloud was abundant at altitudes as high as 250 km, while later it was found mostly at 100-150 km, suggesting that the material that had been deposited from above had gathered at the lower altitudes. Radiance from the southern cloud increased until mid-2015 and since then has decreased. The cloud may be transitioning to the more uniform hood morphology familiar in the north. Taking the north and south together, by the end of the Cassini mission in 2017 we will have observed almost an entire seasonal cycle of the ice cloud.

  2. Pole mass, width, and propagators of unstable fermions

    International Nuclear Information System (INIS)

    Kniehl, B.A.; Sirlin, A.

    2008-01-01

    The concepts of pole mass and width are extended to unstable fermions in the general framework of parity-nonconserving gauge theories, such as the Standard Model. In contrast with the conventional on-shell definitions, these concepts are gauge independent and avoid severe unphysical singularities, properties of great importance since most fundamental fermions in nature are unstable particles. General expressions for the unrenormalized and renormalized dressed propagators of unstable fermions and their field-renormalization constants are presented. (orig.)

  3. Performance study of quadrupole with broken line profile pole tip

    International Nuclear Information System (INIS)

    Fan Mingwu; Zhang Tianjue; Chu Chengjie

    1997-01-01

    Most of quadrupole used for beam focusing possess hyperbola profile tip. To simplify machining processes and ensure the assembling accuracy, a broken line profile pole tip is adapted instead of hyperbola. The results of the magnetic field simulation codes and the tests show the good quality field generated by such configuration: not only more uniform field gradient, but also field more concentrated at useful area. These types of quadrupole are used at CYCIAE-30 cyclotron and HI-13 tandem transportation lines

  4. Edgar Savisaar : BRS pole piisavalt investeerinud / Raigo Neudorf

    Index Scriptorium Estoniae

    Neudorf, Raigo

    2006-01-01

    Majandus- ja kommunikatsiooniminister on rahul, et riigi ja BRS-iga saavutati kokkulepe ettevõtte aktsiate tagasiostuks, kuid leiab, et BRS pole täitnud võetud investeerimiskohustusi ning seega peab järgnevatel aastatel suunama ettevõtte kaasajastamisse miljardeid kroone. Vt. samas: Jüri Käo: investeeringute kogumaht ületas nõutu; Savisaar: Jüri Käo ajab pada; Pingelised läbirääkimised BRS-iga

  5. Background Studies for Acoustic Neutrino Detection at the South Pole

    Science.gov (United States)

    Abbasi, R.; Abdou, Y.; Abu-Zayyad, T.; Adams, J.; Aguilar, J. A.; Ahlers, M.; Andeen, K.; Auffenberg, J.; Bai, X.; Baker, M.; hide

    2012-01-01

    The detection of acoustic signals from ultra-high energy neutrino interactions is a promising method. to measure the flux of cosmogenic neutrinos expected on Earth. The energy threshold for this process depends strongly on the absolute noise level in the target material. The South Pole Acoustic Test Setup (SPATS). deployed in the upper part of four boreholes of the IceCube Neutrino Observatory, has monitored the noise in Antarctic ice at the geographic South Pole for more than two years down to 500 m depth. The noise is very stable and Gaussian distributed, Lacking an in situ calibration up to now, laboratory measurements have been used to estimate the absolute noise level in the 10-50 kHz frequency range to be smaller than 20 mPa. Using a threshold trigger. sensors of the South Pole Acoustic Test Setup registered acoustic events in the IceCube detector volume and its vicinity. Acoustic signals from refreezing IceCube holes and from anthropogenic sources have been used to test the localization of acoustic events. An upper limit on the neutrino flux at energies E(sub v) > 10(exp 11) GeV is derived from acoustic data taken over eight months.

  6. THE SUSTAINABLE DEVELOPMENT OF THE BRASOV GROWTH POLE

    Directory of Open Access Journals (Sweden)

    Aida CATANA

    2016-12-01

    Full Text Available The demographic dynamics analysed in the context of the relationship between economic development and social inclusion presents an image of the sustainable development of a community as well as the manner how the financial resources have been used. With an allocation of 74.3 million euro in the programming period 2007-2013, the Brasov Growth Pole has pursued the contribution to the achievement of sustainable development since 2005 by the participation in the Agenda 21. The implementation of projects with European financing in areas such as transport, social and educational infrastructure or tourism have generated changes/demographic movements, which this paper proposes to present. The evolution of the stable population, its dynamics at the level of each locality that is part of the Brasov growth pole as well as the dynamics of the number of employees or the development of the unemployment rate are presented by the cluster analysis. The effects of the European financing obtained from Regional Operational Programme 2007-2013 are thus reflected in the sustainable development of the Brasov growth pole from the point of view of the dynamics of the population

  7. Factorization and resummation for collinear poles in QCD amplitudes

    Energy Technology Data Exchange (ETDEWEB)

    Dixon, Lance J.; Magnea, Lorenzo; Sterman, George

    2008-05-28

    We study the origin of subleading soft and collinear poles of form factors and amplitudes in dimensionally-regulated massless gauge theories. In the case of form factors of fundamental fields, these poles originate from a single function of the coupling, denoted G({alpha}{sub s}), depending on both the spin and gauge quantum numbers of the field. We relate G({alpha}{sub s}) to gauge-theory matrix elements involving the gluon field strength. We then show that G({alpha}{sub s}) is the sum of three terms: a universal eikonal anomalous dimension, a universal non-eikonal contribution, given by the coefficient B{sub {delta}}({alpha}{sub s}) of {delta}(1-z) in the collinear evolution kernel, and a process-dependent short-distance coefficient function, which does not contribute to infrared poles. Using general results on the factorization of soft and collinear singularities in fixed-angle massless gauge theory amplitudes, we conclude that all such singularities are captured by the eikonal approximation, supplemented only by the knowledge of B{sub {delta}}({alpha}{sub s}). We explore the consequences of our results for conformal gauge theories, where in particular we find a simple exact relation between the form factor and the cusp anomalous dimension.

  8. Automatic Pole and Q-Value Extraction for RF Structures

    Energy Technology Data Exchange (ETDEWEB)

    C. Potratz, H.-W. Glock, U. van Rienen, F. Marhauser

    2011-09-01

    The experimental characterization of RF structures like accelerating cavities often demands for measuring resonant frequencies of Eigenmodes and corresponding (loaded) Q-values over a wide spectral range. A common procedure to determine the Q-values is the -3dB method, which works well for isolated poles, but may not be applicable directly in case of multiple poles residing in close proximity (e.g. for adjacent transverse modes differing by polarization). Although alternative methods may be used in such cases, this often comes at the expense of inherent systematic errors. We have developed an automation algorithm, which not only speeds up the measurement time significantly, but is also able to extract Eigenfrequencies and Q-values both for well isolated and overlapping poles. At the same time the measurement accuracy may be improved as a major benefit. To utilize this procedure merely complex scattering parameters have to be recorded for the spectral range of interest. In this paper we present the proposed algorithm applied to experimental data recorded for superconducting higher-order-mode damped multi-cell cavities as an application of high importance.

  9. Management of lower pole nephrolithiasis: a critical analysis.

    Science.gov (United States)

    Lingeman, J E; Siegel, Y I; Steele, B; Nyhuis, A W; Woods, J R

    1994-03-01

    The results of extracorporeal shock wave lithotripsy (ESWL*) and percutaneous nephrostolithotomy for the treatment of lower pole nephrolithiasis were examined in 32 consecutive patients undergoing percutaneous nephrostolithotomy at the Methodist Hospital of Indiana and through meta-analysis of publications providing adequate stratification of treatment results. Of 101 cases managed with percutaneous nephrostolithotomy 91 (90%) were stone-free, a result significantly better than that achieved with ESWL (1,733 of 2,927 stone-free, 59%). Stone-free rates with percutaneous nephrostolithotomy were independent of stone burden, whereas stone-free rates with ESWL were inversely correlated to the stone burden treated. The morbidity of patients undergoing percutaneous nephrostolithotomy at our hospital was minimal, with a mean hospital stay of 4.7 +/- 2.8 days. No blood transfusions were required. All patients became stone-free. The percentage of urolithiasis patients with lower pole calculi is increasing. Because of the significantly greater efficacy of percutaneous nephrostolithotomy for lower pole calculi, particularly stones larger than 10 mm. in diameter, further consideration should be given to an initial approach with percutaneous nephrostolithotomy.

  10. Spatial patterns of pollution associated with creosote treated poles in Mälardalen

    OpenAIRE

    Forselius, Ellen

    2015-01-01

    Creosote is a product name given to a mixture of several hundred compounds, which is often used to protect wooden poles from rot and insect damage, however it has also been linked to causing cancer in humans. Alternative materials for power poles include concrete, steel, composite and non-treated wooden poles. This report looks at Mälarenergi Elnät ABs 17,000 creosote coated poles and their patterns of pollution. GIS analyses in ArcGIS were used to evaluate which creosote poles are most criti...

  11. POLE-LIKE OBJECT EXTRACTION FROM MOBILE LIDAR DATA

    Directory of Open Access Journals (Sweden)

    H. Zheng

    2016-06-01

    Full Text Available Object detection and recognition from LiDAR (Light Detection And Ranging data has been a research topic in the fields of photogrammetry and computer vision. Unlike point clouds collected in well-controlled indoor environments, point clouds in urban environments are more complex due to complexity of the real world. For example, trees sometimes close to signs or buildings, which will cause occlusions in the point clouds. Current object detection or reconstruction algorithms will have problems when recognizing objects with severe occlusions caused by trees etc. In this paper, a robust vegetation removal method and a DBSCAN based pole-like object detection method are proposed. Based on observation that major difference between vegetation and other rigid objects is their penetrability with respect to LiDAR, we introduce a local roughness measure to differentiate rigid objects from non-rigid ones (vegetation in this paper. First, a local sphere with a small radius is generated for each input point. Three principal components of the local sphere are then calculated, and a plane is determined. The roughness is obtained through calculating the standard deviation of distances from all inside points to the plane by a weighted summation of the normalized distances. The further the point to the plane, the smaller the weight is. Finally, a graph cuts based method is introduced to classify the input point sets into two groups. The data term is defined by the normalized roughness of the current point, and the smoothness term is defined by the normalized distance between the point and its nearest neighbour point. In terms of pole-like object detection, first, a uniformed 2D grid is generated through projecting all the points to the XY-plane. The seed points of the pole-like objects are obtained by determining the x and y coordinates by the centres of the highest density cells of the grid and the z coordinate by the mean height of the point sets of each object

  12. Live imaging of spindle pole disorganization in docetaxel-treated multicolor cells

    International Nuclear Information System (INIS)

    Sakaushi, Shinji; Nishida, Kumi; Minamikawa, Harumi; Fukada, Takashi; Oka, Shigenori; Sugimoto, Kenji

    2007-01-01

    Treatment of cells with docetaxel at low concentrations induces aberrant bipolar spindles of which two centrosomes stay at only one pole, and also induces multipolar spindles. To gain insight into the relations between centrosome impairment and structural defects of the spindle, live-cell imaging was performed on a human MDA Auro/imp/H3 cell line in which centrosomes/mitotic spindles, nuclear membrane and chromatin were simultaneously visualized by fluorescent proteins. In the presence of docetaxel at IC 50 concentration, the centrosomes did not segregate, and multiple aster-like structures ectopically arose around the disappearing nuclear membrane. Those ectopic structures formed an acentrosomal pole opposing to the two-centrosomes-containing pole. In late metaphase, one pole often fragmented into multiple spindle poles, leading multipolar division. These results suggest that spindle pole fragility may be induced by centrosome impairment, and collapse of the pole may contribute to induction of aneuploid daughter cells

  13. Stone clearance in lower pole nephrolithiasis after extra corporeal shock wave lithotripsy – the controversy continues

    Directory of Open Access Journals (Sweden)

    Akhtar Sobia

    2003-01-01

    Full Text Available Abstract Background To determine factors influencing the clearance of fragments after extra-corporeal shock wave lithotripsy (ESWL for lower pole calyceal (LPC stones. Methods In the period between July 1998 and Oct 2001, 100 patients with isolated lower polar calyceal calculi ≤ 20 mm, in patients aged ≥ 14 years, were included in the study. Intravenous urograms (IVU were reviewed to define the LPC anatomy (width of the infundibulum and pelvicalyceal angle. Study end points i.e. stone free status; number of shock waves used and number of sessions were correlated with variables like LPC anatomy, body mass index and stone size. Results At three months follow up the clearance for stone size ≤ 10 mm, 11–15 mm and 16–20 mm were 95, 96 and 90% respectively. Patients with acute LPC (90° had stone clearance of 94 and 100% respectively. For the infundibular width of 4 mm, it was 100%. For body mass index (BMI less than and > 30 kg/m2, the stone clearance was 92 and 95% respectively. Conclusions There is a trend towards more ESWL sessions and shock wave requirement in patients with acute pelvi-calyceal angle and narrow infundibulum but it is not statistically significant. Size (≤ 20 mm and BMI has no relation with stone clearance. With modern lithotripter, stones up to 20 mm could primarily be treated by ESWL, irrespective of an un-favorable lower polar calyceal anatomy and body habitus.

  14. Laparoscopic upper pole heminephroureterectomy in children: Seven-year experience

    Directory of Open Access Journals (Sweden)

    Antonio Marte

    2015-01-01

    Full Text Available Background: Minimally invasive surgery is the current approach to perform heminephroureterectomy (HN in children. This can be obtained through a transperitoneal (TP or a retroperitoneal approach. Here, we report our experience using a TP approach. Materials and Methods: From 2005 to 2014, 22 TP laparoscopic upper poles HN were performed at our institution. There were nine girls and 13 boys aged between 20 months and 6 years (mean age 3.9. Eight patients were diagnosed prenatally, 17 patients presented with urinary tract infection (UTI and three with vomiting and failure to thrive. The indication for HN was reflux nephropathy and UTI in non-functioning upper pole in 19 patients and cystic dysplasia in 1 patient. The surgical technique involved the following steps: Cystoscopic recognition; positioning of 3-4 trocar (right HN; identification of the kidney (detachment of the colon; isolation and low ligation of the dilated ureter; decrossing from renal vessels; section of the parenchyma by LigaSure; haemostasis with clips and LigaSure; drain. Results: The mean operative time was 154 min (range: 81-220 min. All patients were discharged from the 2 nd to 4 th day. Neither major complication nor conversion was recorded. 1 patient presented leakage of urine for 7 days from the drainage which resolved spontaneously. At ultrasound follow-up, 5 patients showed a secondary perirenal cyst, 2-5 cm diameter that resolved spontaneously. Conclusion: The results indicate that laparoscopic upper pole heminephrectomy is the treatment of choice in cases of non-functioning dilated lower segments of duplicated kidneys. The use of laparoscopic approach offers a good working space, a good visual control of the vessels and allows a very low isolation of the ureteral stump which counterbalance the peritoneal violation.

  15. DETECTION AND CLASSIFICATION OF POLE-LIKE OBJECTS FROM MOBILE MAPPING DATA

    Directory of Open Access Journals (Sweden)

    K. Fukano

    2015-08-01

    Full Text Available Laser scanners on a vehicle-based mobile mapping system can capture 3D point-clouds of roads and roadside objects. Since roadside objects have to be maintained periodically, their 3D models are useful for planning maintenance tasks. In our previous work, we proposed a method for detecting cylindrical poles and planar plates in a point-cloud. However, it is often required to further classify pole-like objects into utility poles, streetlights, traffic signals and signs, which are managed by different organizations. In addition, our previous method may fail to extract low pole-like objects, which are often observed in urban residential areas. In this paper, we propose new methods for extracting and classifying pole-like objects. In our method, we robustly extract a wide variety of poles by converting point-clouds into wireframe models and calculating cross-sections between wireframe models and horizontal cutting planes. For classifying pole-like objects, we subdivide a pole-like object into five subsets by extracting poles and planes, and calculate feature values of each subset. Then we apply a supervised machine learning method using feature variables of subsets. In our experiments, our method could achieve excellent results for detection and classification of pole-like objects.

  16. Pole-zero form fractional model identification in frequency domain

    International Nuclear Information System (INIS)

    Mansouri, R.; Djamah, T.; Djennoune, S.; Bettayeb, M.

    2009-01-01

    This paper deals with system identification in the frequency domain using non integer order models given in the pole-zero form. The usual identification techniques cannot be used in this case because of the non integer orders of differentiation which makes the problem strongly nonlinear. A general identification method based on Levenberg-Marquardt algorithm is developed and allows to estimate the (2n+2m+1) parameters of the model. Its application to identify the ''skin effect'' of a squirrel cage induction machine modeling is then presented.

  17. Licensing of yeast centrosome duplication requires phosphoregulation of sfi1.

    Directory of Open Access Journals (Sweden)

    Jennifer S Avena

    2014-10-01

    Full Text Available Duplication of centrosomes once per cell cycle is essential for bipolar spindle formation and genome maintenance and is controlled in part by cyclin-dependent kinases (Cdks. Our study identifies Sfi1, a conserved component of centrosomes, as the first Cdk substrate required to restrict centrosome duplication to once per cell cycle. We found that reducing Cdk1 phosphorylation by changing Sfi1 phosphorylation sites to nonphosphorylatable residues leads to defects in separation of duplicated spindle pole bodies (SPBs, yeast centrosomes and to inappropriate SPB reduplication during mitosis. These cells also display defects in bipolar spindle assembly, chromosome segregation, and growth. Our findings lead to a model whereby phosphoregulation of Sfi1 by Cdk1 has the dual function of promoting SPB separation for spindle formation and preventing premature SPB duplication. In addition, we provide evidence that the protein phosphatase Cdc14 has the converse role of activating licensing, likely via dephosphorylation of Sfi1.

  18. DISCOVERY OF FOG AT THE SOUTH POLE OF TITAN

    International Nuclear Information System (INIS)

    Brown, M. E.; Smith, A. L.; Chen, C.; Adamkovics, M.

    2009-01-01

    While Saturn's moon Titan appears to support an active methane hydrological cycle, no direct evidence for surface-atmosphere exchange has yet appeared. The indirect evidence, while compelling, could be misleading. It is possible, for example, that the identified lake features could be filled with ethane, an involatile long-term residue of atmospheric photolysis; the apparent stream and channel features could be ancient remnants of a previous climate; and the tropospheric methane clouds, while frequent, could cause no rain to reach the surface. We report here the detection of fog at the south pole of Titan during late summer using observations from the VIMS instrument on board the Cassini spacecraft. While terrestrial fog can form from a variety of causes, most of these processes are inoperable on Titan. Fog on Titan can only be caused by evaporation of nearly pure liquid methane; the detection of fog provides the first direct link between surface and atmospheric methane. Based on the detections presented here, liquid methane appears widespread at the south pole of Titan in late southern summer, and the hydrological cycle on Titan is currently active.

  19. Acoustic wave filter based on periodically poled lithium niobate.

    Science.gov (United States)

    Courjon, Emilie; Bassignot, Florent; Ulliac, Gwenn; Benchabane, Sarah; Ballandras, Sylvain

    2012-09-01

    Solutions for the development of compact RF passive transducers as an alternative to standard surface or bulk acoustic wave devices are receiving increasing interest. This article presents results on the development of an acoustic band-pass filter based on periodically poled ferroelectric domains in lithium niobate. The fabrication of periodically poled transducers (PPTs) operating in the range of 20 to 650 MHz has been achieved on 3-in (76.2-mm) 500-μm-thick wafers. This kind of transducer is able to excite elliptical as well as longitudinal modes, yielding phase velocities of about 3800 and 6500 ms(-1), respectively. A new type of acoustic band-pass filter is proposed, based on the use of PPTs instead of the SAWs excited by classical interdigital transducers. The design and the fabrication of such a filter are presented, as well as experimental measurements of its electrical response and transfer function. The feasibility of such a PPT-based filter is thereby demonstrated and the limitations of this method are discussed.

  20. Groebner Basis Solutions to Satellite Trajectory Control by Pole Placement

    Science.gov (United States)

    Kukelova, Z.; Krsek, P.; Smutny, V.; Pajdla, T.

    2013-09-01

    Satellites play an important role, e.g., in telecommunication, navigation and weather monitoring. Controlling their trajectories is an important problem. In [1], an approach to the pole placement for the synthesis of a linear controller has been presented. It leads to solving five polynomial equations in nine unknown elements of the state space matrices of a compensator. This is an underconstrained system and therefore four of the unknown elements need to be considered as free parameters and set to some prior values to obtain a system of five equations in five unknowns. In [1], this system was solved for one chosen set of free parameters with the help of Dixon resultants. In this work, we study and present Groebner basis solutions to this problem of computation of a dynamic compensator for the satellite for different combinations of input free parameters. We show that the Groebner basis method for solving systems of polynomial equations leads to very simple solutions for all combinations of free parameters. These solutions require to perform only the Gauss-Jordan elimination of a small matrix and computation of roots of a single variable polynomial. The maximum degree of this polynomial is not greater than six in general but for most combinations of the input free parameters its degree is even lower. [1] B. Palancz. Application of Dixon resultant to satellite trajectory control by pole placement. Journal of Symbolic Computation, Volume 50, March 2013, Pages 79-99, Elsevier.

  1. Towards a research pole in photonics in Western Romania

    Science.gov (United States)

    Duma, Virgil-Florin; Negrutiu, Meda L.; Sinescu, Cosmin; Rominu, Mihai; Miutescu, Eftimie; Burlea, Amelia; Vlascici, Miomir; Gheorghiu, Nicolae; Cira, Octavian; Hutiu, Gheorghe; Mnerie, Corina; Demian, Dorin; Marcauteanu, Corina; Topala, Florin; Rolland, Jannick P.; Voiculescu, Ioana; Podoleanu, Adrian G.

    2014-07-01

    We present our efforts in establishing a Research Pole in Photonics in the future Arad-Timisoara metropolitan area projected to unite two major cities of Western Romania. Research objectives and related training activities of various institutions and groups that are involved are presented in their evolution during the last decade. The multi-disciplinary consortium consists principally of two universities, UAVA (Aurel Vlaicu University of Arad) and UMF (Victor Babes Medicine and Pharmacy University of Timisoara), but also of the Arad County Emergency University Hospital and several innovative SMEs, such as Bioclinica S.A. (the largest array of medical analysis labs in the region) and Inteliform S.R.L. (a competitive SME focused on mechatronics and mechanical engineering). A brief survey of the individual and joint projects of these institutions is presented, together with their teaching activities at graduate and undergraduate level. The research Pole collaborates in R&D, training and education in biomedical imaging with universities in USA and Europe. Collaborative activities, mainly on Optical Coherence Tomography (OCT) projects are presented in a multidisciplinary approach that includes optomechatronics, precision mechanics and optics, dentistry, medicine, and biology.

  2. Semantic representations in the temporal pole predict false memories.

    Science.gov (United States)

    Chadwick, Martin J; Anjum, Raeesa S; Kumaran, Dharshan; Schacter, Daniel L; Spiers, Hugo J; Hassabis, Demis

    2016-09-06

    Recent advances in neuroscience have given us unprecedented insight into the neural mechanisms of false memory, showing that artificial memories can be inserted into the memory cells of the hippocampus in a way that is indistinguishable from true memories. However, this alone is not enough to explain how false memories can arise naturally in the course of our daily lives. Cognitive psychology has demonstrated that many instances of false memory, both in the laboratory and the real world, can be attributed to semantic interference. Whereas previous studies have found that a diverse set of regions show some involvement in semantic false memory, none have revealed the nature of the semantic representations underpinning the phenomenon. Here we use fMRI with representational similarity analysis to search for a neural code consistent with semantic false memory. We find clear evidence that false memories emerge from a similarity-based neural code in the temporal pole, a region that has been called the "semantic hub" of the brain. We further show that each individual has a partially unique semantic code within the temporal pole, and this unique code can predict idiosyncratic patterns of memory errors. Finally, we show that the same neural code can also predict variation in true-memory performance, consistent with an adaptive perspective on false memory. Taken together, our findings reveal the underlying structure of neural representations of semantic knowledge, and how this semantic structure can both enhance and distort our memories.

  3. Elemental Mercury Diffusion Processes and Concentration at the Lunar Poles

    Science.gov (United States)

    Moxley, Frederick; Killen, Rosemary M.; Hurley, Dana M.

    2011-01-01

    In 2009, the Lyman Alpha Mapping Project (LAMP) spectrograph onboard the Lunar Reconnaissance Orbiter (LRO) spacecraft made the first detection of element mercury (Hg) vapor in the lunar exosphere after the Lunar Crater Observing and Sensing Satellite (LCROSS) Centaur rocket impacted into the Cabeus crater in the southern polar region of the Moon. The lunar regolith core samples from the Apollo missions determined that Hg had a devolatilized pattern with a concentration gradient increasing with depth, in addition to a layered pattern suggesting multiple episodes of burial and volatile loss. Hg migration on the lunar surface resulted in cold trapping at the poles. We have modeled the rate at which indigenous Hg is lost from the regolith through diffusion out of lunar grains. We secondly modeled the migration of Hg vapor in the exosphere and estimated the rate of cold-trapping at the poles using a Monte Carlo technique. The Hg vapor may be lost from the exosphere via ionization, Jeans escape, or re-impact into the surface causing reabsorption.

  4. The effect of poling conditions on the performance of piezoelectric energy harvesters fabricated by wet chemistry

    KAUST Repository

    Fuentes-Fernandez, Erika Maria-Anai

    2015-03-25

    The effect of poling conditions on the power output of piezoelectric energy harvesters using sol-gel based Pb(Zr0.53,Ti0.47)O3-Pb(Zn1/3,Nb2/3)O3 piezoelectric thin-films has been investigated. A strong correlation was established between the poling efficiency and harvester output. A method based on simple capacitance-voltage measurements is shown to be an effective approach to estimate the power output of harvesters poled under different conditions. The poling process was found to be thermally activated with an activation energy of 0.12 eV, and the optimum poling conditions were identified (200 kV cm-1, 250 °C for 50 min). The voltage output and power density obtained under optimum poling conditions were measured to be 558 V cm-2 and 325 μW cm-2, respectively. © The Royal Society of Chemistry.2015.

  5. Field analysis and enhancement of multi-pole magnetic components fabricated on printed circuit board

    International Nuclear Information System (INIS)

    Chiu, K.-C.; Chen, C.-S.

    2007-01-01

    A multi-pole magnetic component magnetized with a fine magnetic pole pitch of less than 1 mm is very difficult to achieve by using traditional methods. Moreover, it requires a precise mechanical process and a complicated magnetization system. Different fine magnetic pole pitches of 300, 350 and 400 μm have been accomplished on 9-pole magnetic components through the printed circuit board (PCB) manufacturing technology. Additionally, another fine magnetic pole pitch of 500 μm was also fabricated on a dual-layered (DL) wire circuit structure to investigate the field enhancement. After measurements, a gain factor of 1.37 was obtained in the field strength. The field variations among different magnetic pole pitches were analyzed in this paper

  6. Iron Pole Shape Optimization of IPM Motors Using an Integrated Method

    Directory of Open Access Journals (Sweden)

    JABBARI, A.

    2010-02-01

    Full Text Available An iron pole shape optimization method to reduce cogging torque in Interior Permanent Magnet (IPM motors is developed by using the reduced basis technique coupled by finite element and design of experiments methods. Objective function is defined as the minimum cogging torque. The experimental design of Taguchi method is used to build the approximation model and to perform optimization. This method is demonstrated on the rotor pole shape optimization of a 4-poles/24-slots IPM motor.

  7. Lower Pole Calyceal Stone and Lithotripsy are Issues with Clearance Fact or Reality?

    Directory of Open Access Journals (Sweden)

    M. Hammad Ather

    2013-12-01

    Full Text Available The lower pole calyceal (LPC stone continues to be an enigma. The complex anatomy of the lower pole collecting system, along with other factors like acute pelvi calyceal angle and narrow and long infundibulum, are some of the complicating factors affecting stone clearance. There have been many studies assessing the impact of collecting system anatomy and most conclude that the complex anatomy of the lower pole collecting system does impact the overall stone-free rate.

  8. Strength training improves double-poling performance after prolonged submaximal exercise in cross-country skiers.

    Science.gov (United States)

    Øfsteng, S; Sandbakk, Ø; van Beekvelt, M; Hammarström, D; Kristoffersen, R; Hansen, J; Paulsen, G; Rønnestad, B R

    2018-03-01

    The purpose of this study was to investigate the effects of adding strength training with or without vibration to cross-country (XC) skiers' endurance training on double-poling (DP) performance, physiological, and kinematic adaptations. Twenty-one well-trained male XC-skiers combined endurance- and upper-body strength training three times per week, either with (n = 11) or without (n = 10) superimposed vibrations for 8 weeks, whereas eight skiers performed endurance training only (CON). Testing included 1RM in upper-body exercises, work economy, neural activation, oxygen saturation in muscle, and DP kinematics during a prolonged submaximal DP roller ski test which was directly followed by a time to exhaustion (TTE) test. TTE was also performed in rested state, and the difference between the two TTE tests (TTE diff ) determined the ability to maintain DP performance after prolonged exercise. Vibration induced no additional effect on strength or endurance gains. Therefore, the two strength training groups were pooled (STR, n = 21). 1RM in STR increased more than in CON (P strength, DP performance following prolonged submaximal DP and TTE diff , indicating a specific effect of improved strength on the ability to maintain performance after long-lasting exercise. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Shadow poles in coupled-channel problems calculated with the Berggren basis

    Science.gov (United States)

    Id Betan, R. M.; Kruppa, A. T.; Vertse, T.

    2018-02-01

    Background: In coupled-channels models the poles of the scattering S matrix are located on different Riemann sheets. Physical observables are affected mainly by poles closest to the physical region but sometimes shadow poles have considerable effect too. Purpose: The purpose of this paper is to show that in coupled-channels problems all poles of the S matrix can be located by an expansion in terms of a properly constructed complex-energy basis. Method: The Berggren basis is used for expanding the coupled-channels solutions. Results: The locations of the poles of the S matrix for the Cox potential, constructed for coupled-channels problems, were numerically calculated and compared with the exact ones. In a nuclear physics application the Jπ=3 /2+ resonant poles of 5He were calculated in a phenomenological two-channel model. The properties of both the normal and shadow resonances agree with previous findings. Conclusions: We have shown that, with an appropriately chosen Berggren basis, all poles of the S matrix including the shadow poles can be determined. We have found that the shadow pole of 5He migrates between Riemann sheets if the coupling strength is varied.

  10. Time domain oscillating poles: Stability redefined in Memristor based Wien-oscillators

    KAUST Repository

    Talukdar, Abdul Hafiz Ibne

    2012-07-28

    Traditionally, the necessary and sufficient condition for any system to be oscillating is that its poles are located on the imaginary (jω) axis. In this paper, for the first time, we have shown that systems can oscillate with time-domain oscillating poles. The idea is verified using a Memristor based Wien oscillator. Sustained oscillations are observed without having the poles of the system fixed on the imaginary axis and the oscillating behavior of the system poles is reported. The oscillating resistance and triangular shape of FFT are also demonstrated with mathematical reasoning and simulation results to support the unusual and surprising characteristics. © 2009 IEEE.

  11. Roadside tree/pole crash barrier field test

    Science.gov (United States)

    Wilson, A. H.

    1979-01-01

    A series of tests was carried out to evaluate the performance of a crash barrier designed to protect the occupants of an automobile from serious injury. The JPL barrier design is a configuration of empty aluminum beverage cans contained in a tear-resistant bag which, in turn, is encased in a collapsible container made of plywood and steel. Tests were conducted with a driven vehicle impacting the barrier. The basic requirements of NCHRP Report 153 were followed except that speeds of 30 mph rather than 60 mph were used. Accelerometer readings on the driver's helmet showed that the driver was never subjected to dangerous decelerations, and never experienced more than temporary discomfort. Also, all of the requirements of the cited report were met. An extrapolation of data indicated that the JPL barrier installed in front of a tree or telephone pole along a roadside would also have met the requirements at a speed of 40 mph.

  12. An adaptive single pole autoreclosure based on zero sequence power

    Energy Technology Data Exchange (ETDEWEB)

    Elkalashy, Nagy I.; Darwish, Hatem A.; Taalab, Abdel-Maksoud I.; Izzularab, Mohmmad A. [Electrical Engineering Department, Faculty of Engineering, Menoufiya University, Shebin Elkom 32511 (Egypt)

    2007-04-15

    In this paper, a novel adaptive single pole autoreclosure is introduced. This reclosure is based on monitoring the fundamental component of the zero sequence instantaneous power to detect the extinction instant of the arc in its secondary period. Thus, adaptive closing instant can be achieved. The concept of reclosure is validated via typical examples of transmission line exposed to ground arcing fault. Effects of fault location and load flow on the accuracy of the technique are examined. Discriminatory zones of the secondary arc period in the zero sequence power domains are determined. A proposed threshold for the reclosing instant is introduced and examined. Validation of the proposed algorithm is verified via Digital Signal Processing (DSP) experimental test set-up. The test results corroborate the efficacy of proposed technique. (author)

  13. Performance of claw-poled PM-stepping motor

    International Nuclear Information System (INIS)

    Liu, C.P.; Jeng, G.R.; Chen, W.C.; Tsai, M.C.; Wu, K.T.; Yao, Y.D.

    2007-01-01

    Present work is to analyze the performance of a permanent-magnetic (PM) stepping motor with claw poles by using the magnetic-circuit simulation technique. In this paper, we calculate the torque characteristics of the motor, such as the detent and the holding torques, and the step-position error by changing the gap between the upper and the lower stators and the staggered angle between the two stators. Through comparison of numerical data with experiment measurements, we found that the detent torque could be effectively reduced by increasing the stator-to-stator gap and further by decreasing the step-position error. Furthermore, the holding torque could be unchanged as the stator assemblage changed; however, it would be degenerated under the condition of low magnetization

  14. Lunar South Pole space water extraction and trucking system

    International Nuclear Information System (INIS)

    Zuppero, A.; Zupp, G.; Schnitzler, B.; Larson, T.K.; Rice, J.W.

    1998-03-01

    This concept proposes to use thermal processes alone to extract water from the lunar South Pole and launch payloads to low lunar orbit. Thermal steam rockets would use water propellant for space transportation. The estimated mass of a space water tanker powered by a nuclear heated steam rocket suggests it can be designed for launch in the Space Shuttle bay. The performance depends on the feasibility of a nuclear reactor rocket engine producing steam at 1,100 degrees Kelvin, with a power density of 150 Megawatts per ton of rocket, and operating for thousands of 20 minute cycles. An example uses reject heat from a small nuclear electric power supply to melt 17,800 tons per year of lunar ice. A nuclear heated steam rocket would use the propellant water to launch and deliver 3,800 tons of water per year to a 100 km low lunar orbit

  15. Bacterial diversity in snow on North Pole ice floes

    DEFF Research Database (Denmark)

    Hauptmann, Aviaja Zenia Edna Lyberth; Stibal, Marek; Bælum, Jacob

    2014-01-01

    sites clustered together when compared to the underlying environments of sea ice and ocean water. The Shannon indices ranged from 2.226 to 3.758, and the Chao1 indices showed species richness between 293 and 353 for the three samples. The relatively low abundances and diversity found in the samples......The microbial abundance and diversity in snow on ice floes at three sites near the North Pole was assessed using quantitative PCR and 454 pyrosequencing. Abundance of 16S rRNA genes in the samples ranged between 43 and 248 gene copies per millilitre of melted snow. A total of 291,331 sequences were...... indicate a lower rate of microbial input to this snow habitat compared to snow in the proximity of terrestrial and anthropogenic sources of microorganisms. The differences in species composition and diversity between the sites show that apparently similar snow habitats contain a large variation...

  16. Ruthenium therapy of choroidal melanomas of the posterior pole

    International Nuclear Information System (INIS)

    Langmann, G.; Faschinger, C.; Langmann, A.; Poier, E.

    1992-01-01

    The indications for conservative treatment of intraocular melanomas of the posterior pole with radioactive plaques are controversial. Melanomas located at the macula or adjacent to the fovea are regarded as relative contraindications for conservative treatment. Three melanomas of the macula have been treated at our department meanwhile. The tumor elevation ranged between 3.5 and 6 mm, the distance to the fovea between 0.5 and 2 dd. An average radiation dosage between 130 and 160 Gy was delivered to the apex of the tumors. The duration of observation was between 12 months to 4 years. The tumor regression was satisfactory in all 3 cases, additional photocoagulation was necessary in one case of incomplete tumor regression. Pretreatment visual acuity ranged between 0.8 and 0.1, posttreatment visual acuity between 0.8 and 0.25. In one case we observed a local radiation vasculopathy. General examination did not reveal any signs of metastases. (authors)

  17. Analysis of magnetic abrasive finishing with slotted magnetic pole

    Science.gov (United States)

    Jayswal, S. C.; Jain, V. K.; Dixit, P. M.

    2004-06-01

    Magnetic Abrasive Finishing (MAF) is relatively a new finishing process among the advanced finishing processes in which the workpiece is kept in the magnetic field created by two poles of an electromagnet. The working gap between the workpiece and the magnet is filled with magnetic abrasive particles. A flexible magnetic abrasive brush is formed, acting as a multipoint cutting tool, due to the effect of magnetic field in the working gap. This process is capable of producing the surface finish of nanometer range. Most of the researchers have been using the electromagnet having a slot in it to improve the performance of the process but hardly any information is available about its effect on the process performance. This paper deals with the effect of a slot made in the electromagnet on the forces and surface quality during MAF. An experimental set-up is designed and fabricated for the measurement of the magnetic field distribution in the working gap. The magnetic field is simulated using a finite element model of the process. The magnetic field is also measured experimentally to validate the theoretical results. It indicates a good agreement between the experimental results and simulated values. The finite element method is further used for the evaluation of the magnetic force and surface quality during MAF. To our surprise it is found that the force under the slot is negative, even then process performance is improved. MAF process removes a very small amount of material by indentation and rotation of the magnetic abrasive particles in the circular tracks. Due to rotation of the magnetic abrasive flexible brush, grooves are formed on the workpiece surface which decides the surface profile after MAF. Surface quality is determined on the basis of the surface profile achieved by equating the volume of groove produced. These results show an improvement in finishing rate while using a slotted pole surface.

  18. Determination of regional Euler pole parameters for Eastern Austria

    Science.gov (United States)

    Umnig, Elke; Weber, Robert; Schartner, Matthias; Brueckl, Ewald

    2017-04-01

    The horizontal motion of lithospheric plates can be described as rotations around a rotation axes through the Earth's center. The two possible points where this axes intersects the surface of the Earth are called Euler poles. The rotation is expressed by the Euler parameters in terms of angular velocities together with the latitude and longitude of the Euler pole. Euler parameters were calculated from GPS data for a study area in Eastern Austria. The observation network is located along the Mur-Mürz Valley and the Vienna Basin. This zone is part of the Vienna Transfer Fault, which is the major fault system between the Eastern Alps and the Carpathians. The project ALPAACT (seismological and geodetic monitoring of ALpine-PAnnonian ACtive Tectonics) investigated intra plate tectonic movements within the Austrian part in order to estimate the seismic hazard. Precise site coordinate time series established from processing 5 years of GPS observations are available for the regional network spanning the years from 2010.0 to 2015.0. Station velocities with respect to the global reference frame ITRF2008 have been computed for 23 sites. The common Euler vector was estimated on base of a subset of reliable site velocities, for stations directly located within the area of interest. In a further step a geokinematic interpretation shall be carried out. Therefore site motions with respect to the Eurasian Plate are requested. To obtain this motion field different variants are conceivable. In a simple approach the mean ITRF2008 velocity of IGS site GRAZ can be adopted as Eurasian rotational velocity. An improved alternative is to calculate site-specific velocity differences between the Euler rotation and the individual site velocities. In this poster presentation the Euler parameters, the residual motion field as well as first geokinematic interpretation results are presented.

  19. Reconstruction of the kinetochore: a prelude to meiosis

    Directory of Open Access Journals (Sweden)

    Haraguchi Tokuko

    2007-06-01

    Full Text Available Abstract In eukaryotic organisms, chromosomes are spatially organized within the nucleus. Such nuclear architecture provides a physical framework for the genetic activities of chromosomes, and changes its functional organization as the cell moves through the phases of the cell cycle. The fission yeast Schizosaccharomyces pombe provides a striking example of nuclear reorganization during the transition from mitosis to meiosis. In this organism, centromeres remain clustered at the spindle-pole body (SPB; a centrosome-equivalent structure in fungi during mitotic interphase. In contrast, during meiotic prophase, centromeres dissociate from the SPB and telomeres cluster to the SPB. Recent studies revealed that this repositioning of chromosomes is regulated by mating pheromone signaling. Some centromere proteins disappear from the centromere in response to mating pheromone, leading to dissociation of centromeres from the SPB. Interestingly, mating pheromone signaling is also required for monopolar orientation of the kinetochore which is crucial for proper segregation of sister chromatids during meiosis. When meiosis is induced in the absence of mating pheromone signaling, aberrant chromosome behaviors are observed: the centromere proteins remain at the centromere; the centromere remains associated with the SPB; and sister chromatids segregate precociously in the first meiotic division. These aberrant chromosome behaviors are all normalized by activating the mating pheromone signaling pathway. Thus, action of mating pheromone on the centromere is important for coherent behavior of chromosomes in meiosis. Here we discuss repositioning and reconstruction of the centromere during the transition from mitosis to meiosis, and highlight its significance for proper progression of meiosis.

  20. Development of a field pole of 1 MW-class HTS motor

    International Nuclear Information System (INIS)

    Yuan, S; Kimura, Y; Miki, M; Felder, B; Tsuzuki, K; Izumi, M; Ida, T; Umemoto, K; Aizawa, K; Yokoyama, M

    2010-01-01

    We report a field-pole high-temperature superconductor (HTS) magnet designed for 1 MW-class motor for propulsion. The field pole is assembled to the rotor of the radial-type motor. Each field pole is composed of HTS-Bi2223 tape wound into coils which have been piled up as a double pancake coils. In the design concept of the motor, we employ field poles without iron core. We prepared the test field-pole coil, whose dimension is smaller than the designed one for 1 MW, and tested its performances after cooling under self-field and external magnetic field. We verified the operation with the minimum bend radius of the coils required in the motor design, while keeping an optimal current which is lower than the critical current of the field-pole coil. The test HTS field poles were successfully cooled down and operated under a magnetic field ranging up to 5 T. We report the results of the test field-pole coil and the manufacture of a practical racetrack coil with Bi2223 and discuss the adaptability to 1 MW-class motors.

  1. Experience on impregnation of wood.en poles with water borne salts

    African Journals Online (AJOL)

    part of pole treated. To ensure this diffusion of the preservative all around, the pole is pricked every. 8 - 10 cm. vertically and 4 - 5 cm peripherally. The treatment with COBRA was discontinued soon after for the following reasons:- I. Leechability. Since the process depends on osmosis, the preservative must be highly soluble ...

  2. The practice of pole dance as a leisure activity in Denmark

    DEFF Research Database (Denmark)

    Jensen, Andorra Lynn

    2015-01-01

    The aim of this study is to explore the how pole dance is practiced as a form of leisure activity in Denmark. The methodical approach is qualitative and inspired by ethnography. I have conducted a field study where I have observed and participated in the pole dance culture in Copenhagen from May...

  3. Converting point-wise nuclear cross sections to pole representation using regularized vector fitting

    Science.gov (United States)

    Peng, Xingjie; Ducru, Pablo; Liu, Shichang; Forget, Benoit; Liang, Jingang; Smith, Kord

    2018-03-01

    Direct Doppler broadening of nuclear cross sections in Monte Carlo codes has been widely sought for coupled reactor simulations. One recent approach proposed analytical broadening using a pole representation of the commonly used resonance models and the introduction of a local windowing scheme to improve performance (Hwang, 1987; Forget et al., 2014; Josey et al., 2015, 2016). This pole representation has been achieved in the past by converting resonance parameters in the evaluation nuclear data library into poles and residues. However, cross sections of some isotopes are only provided as point-wise data in ENDF/B-VII.1 library. To convert these isotopes to pole representation, a recent approach has been proposed using the relaxed vector fitting (RVF) algorithm (Gustavsen and Semlyen, 1999; Gustavsen, 2006; Liu et al., 2018). This approach however needs to specify ahead of time the number of poles. This article addresses this issue by adding a poles and residues filtering step to the RVF procedure. This regularized VF (ReV-Fit) algorithm is shown to efficiently converge the poles close to the physical ones, eliminating most of the superfluous poles, and thus enabling the conversion of point-wise nuclear cross sections.

  4. A Visit to the South Pole-Adventures of the First Indian to Winter ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 15; Issue 4. A Visit to the South Pole - Adventures of the First Indian to Winter-Over the South Pole and Explore Antarctica. Parmjit Singh Sehra. Reflections Volume 15 Issue 4 April 2010 pp 384-391 ...

  5. High-resolution second-harmonic microscopy of poled silica waveguides

    DEFF Research Database (Denmark)

    Beermann, Jonas; Bozhevolnyi, Sergey I.; Pedersen, Kjeld

    2003-01-01

    A second-harmonic scanning optical microscopy (SHSOM) apparatus operating in reflection is used for high-resolution imaging of second-order optical non-linearities (SONs) in electric-field poled silica-based waveguides. SHSOM of domain walls in a periodically poled KTiOPO4 crystal is performed...

  6. Electron self-energy calculation using a general multi-pole approximation

    CERN Document Server

    Soininen, J A; Shirley, E L

    2003-01-01

    We present a method for calculating the inverse of the dielectric matrix in a solid using a band Lanczos algorithm. The method produces a multi-pole approximation for the inverse dielectric matrix with an arbitrary number of poles. We discuss how this approximation can be used to calculate the screened Coulomb interaction needed for electron self-energy calculations in solids.

  7. Threshold for strong thermal dephasing in periodically poled KTP in external cavity frequency doubling

    DEFF Research Database (Denmark)

    Lundeman, Jesper Holm; Jensen, Ole Bjarlin; Andersen, Peter E.

    2009-01-01

    We present a measurement series of the efficiency of periodically poled KTP used for second-harmonic generation in an external phase-locked cavity. Due to the high absorption (0.01 cm^−1) in the PPKTP crystal at the pump wavelength a strong thermal dephasing of the periodically poled grating...

  8. High-resolution second-harmonic microscopy of poled silica waveguides

    DEFF Research Database (Denmark)

    Beermann, Jonas; Bozhevolnyi, Sergey I.; Pedersen, Kjeld

    2003-01-01

    A second-harmonic scanning optical microscopy (SHSOM) apparatus operating in reflection is used for high-resolution imaging of second-order optical non-linearities (SONs) in electric-field poled silica-based waveguides. SHSOM of domain walls in a periodically poled KTiOPO_4 crystal is performed...

  9. Development of a field pole of 1 MW-class HTS motor

    Science.gov (United States)

    Yuan, S.; Kimura, Y.; Miki, M.; Felder, B.; Tsuzuki, K.; Ida, T.; Izumi, M.; Umemoto, K.; Aizawa, K.; Yokoyama, M.

    2010-06-01

    We report a field-pole high-temperature superconductor (HTS) magnet designed for 1 MW-class motor for propulsion. The field pole is assembled to the rotor of the radial-type motor. Each field pole is composed of HTS-Bi2223 tape wound into coils which have been piled up as a double pancake coils. In the design concept of the motor, we employ field poles without iron core. We prepared the test field-pole coil, whose dimension is smaller than the designed one for 1 MW, and tested its performances after cooling under self-field and external magnetic field. We verified the operation with the minimum bend radius of the coils required in the motor design, while keeping an optimal current which is lower than the critical current of the field-pole coil. The test HTS field poles were successfully cooled down and operated under a magnetic field ranging up to 5 T. We report the results of the test field-pole coil and the manufacture of a practical racetrack coil with Bi2223 and discuss the adaptability to 1 MW-class motors.

  10. Pole-to-Pole Connections: Similarities between Arctic and Antarctic Microbiomes and Their Vulnerability to Environmental Change

    Directory of Open Access Journals (Sweden)

    Julia Kleinteich

    2017-11-01

    Full Text Available The global biogeography of microorganisms remains poorly resolved, which limits the current understanding of microbial resilience toward environmental changes. Using high-throughput 16S rRNA gene amplicon sequencing, we characterized the microbial diversity of terrestrial and lacustrine biofilms from the Arctic, Antarctic and temperate regions. Our analyses suggest that bacterial community compositions at the poles are more similar to each other than they are to geographically closer temperate habitats, with 32% of all operational taxonomic units (OTUs co-occurring in both polar regions. While specific microbial taxa were confined to distinct regions, representing potentially endemic populations, the percentage of cosmopolitan taxa was higher in Arctic (43% than in Antarctic samples (36%. The overlap in polar microbial OTUs may be explained by natural or anthropogenically-mediated dispersal in combination with environmental filtering. Current and future changing environmental conditions may enhance microbial invasion, establishment of cosmopolitan genotypes and loss of endemic taxa.

  11. Stellar population samples at the galactic poles. IV. Luminosity function for the M-type dwarfs at the South Pole

    International Nuclear Information System (INIS)

    Eggen, O.J.

    1976-01-01

    The (UBVRI) photometry of all M dwarfs which are within 10degree of the South Galactic Pole and brighter than visual magnitude 15, and which have annual proper motions greater than 0/sup prime/./sub /096, are discussed. The observations themselves are listed and discussed in a recent Astrophysical Journal Supplement. The luminosity function is found to be very similar, in the overlapping sections, to that previously derived spectrophotometrically from the M stars near the Sun, and the extension to M/subV/ near +13 mag indicates that this luminosity is near the peak of that function. No support is found in these data for the recently suggested superabundance of low velocity M stars near the Sun

  12. Glass fiber -reinforced plastic tapered poles for transmission and distribution lines: development and experimental study

    International Nuclear Information System (INIS)

    Ibrahim, S.; Burachysnsky, V.; Polyzois, D.

    1999-01-01

    A research project to develop lightweight poles for use in power transmission and distribution lines and involving the use of glass fiber-reinforced plastic using the filament winding process is described. Twelve full scale specimen poles were designed, fabricated and subjected to cantilever bending to test failure modes. The test parameters included fiber orientation, ratio of longitudinal-to-circumferential fiber, and the number of layers. Results showed that local buckling was the most dominant failure mode, attributable to the high radius-to-thickness ratio of the specimen poles. Overall, however, these fiber-reinforced plastic poles compared favourably to wooden poles in carrying capacity with significant weight reduction. Lateral displacement at ultimate loads did not exceed the acceptable limit of 10 per cent of the specimen free length. 7 refs., 3 tabs., 2 figs

  13. FEM Analysis of Brushless DC Servomotor with Fractional Number of Slots per Pole

    Directory of Open Access Journals (Sweden)

    BALUTA, G.

    2014-02-01

    Full Text Available The authors present in this paper the analysis with Finite Element Method (FEM of the magnetic circuit for a Brushless DC servomotor with fractional number of slots/pole (9 slots and 10 poles. For this purpose, FEMM 4.2 software package was used for the analysis. To obtain the waveforms of Back-ElectroMotive Forces (BEMFs, electromagnetic and cogging torque for servomotor a program in LUA scripting language (integrated into interactive shell of FEMM4.2 has been created. A comparation with a structure with integer number of slots/pole (18 slots and 6 poles was also realized. The analysis results prove that the structure chosen is an optimal solution: sinusoidal waveforms of BEMFs, improved electromagnetic torque and reduced cogging torque. Therefore, the operating characteristics of the servomotor with 9/10 slots/poles manufactured by Sistem Euroteh Company and included in an integrated electrical drives system are presented in this paper.

  14. Institutional Evaluation in Poles of the Open University System of Brazil

    Directory of Open Access Journals (Sweden)

    Alexciano de Sousa Martins

    2018-03-01

    Full Text Available The study wanted to know the institutional evaluation in poles of distance education, of the Open University of Brazil (UAB system, analyzing the poles of the State of Ceará. The UAB system of the Brazilian Ministry of Education makes it possible to offer courses of higher level agreements with public universities. Ceará counts on UAB poles, since 2006, that form teachers and other professionals, even in regions lacking public higher education. The objective of this study was to discuss the importance of the institutional evaluation in the poles of the Open University of Brazil program through an exploratory and descriptive field research, showing that the institutional evaluation at the poles is minimal and out of line with the legislation in force. Suggestions on how to develop the evaluative practice.

  15. Non-uniformly sampled grids in double pole coordinate system for freeform reflector construction

    Science.gov (United States)

    Ma, Donglin; Pacheco, Shaun; Feng, Zexin; Liang, Rongguang

    2015-08-01

    We propose a new method to design freeform reflectors by nonuniformly sampling the source intensity distribution in double pole coordinate system. In double pole coordinate system, there is no pole for the whole hemisphere because both poles of the spherical coordinate system are moved to southernmost point of the sphere and overlapped together. With symmetric definition of both angular coordinates in the modified double pole coordinate system, a better match between the source intensity distribution and target irradiance distribution can be achieved for reflectors with large acceptance solid angle, leading to higher light efficiency and better uniformity on the target surface. With non-uniform sampling of the source intensity, we can design circular freeform reflector to obtain uniform rectangular illumination pattern. Aided by the feedback optimization, the freeform reflector can achieve the collection efficiency for ideal point source over 0.7 and relative standard deviation (RSD) less than 0.1.

  16. Body Hair

    Science.gov (United States)

    ... girlshealth.gov/ Home Body Puberty Body hair Body hair Even before you get your first period , you ... removing pubic hair Ways to get rid of hair top Removing body hair can cause skin irritation, ...

  17. Strategi Pengembangan Daerah Growth Pole melalui Pemanfaatan Potensi Lokal

    Directory of Open Access Journals (Sweden)

    Rusdarti Rusdarti

    2016-12-01

    Full Text Available This research aims to determine the leading sectors that could be developed in each district in Cilacap Regency as a growth pole area. We use location quotient, shift share, and klassen typology as analysis methods. The research results show that not all of the district at Cilacap regency have a leading sector. Further, districts that have leading sectors are as follows. Wanareja only has a leading sector, i.e. agriculture. Secondly, Kawunganten has two leading sectors, agriculture and finance, rent, and company services. Thirdly, Agriculture becomes the only leading sector of Kampung Laut District. Fourthly, Mining and extraction are the leading sectors of Kesugihan District. Fifthly, Sampang District has buildings and finance sectors as the leading sectors. Sixthly, Kroya District leads in trade, hotel, and restaurant sectors. Seventhly, South Cilacap District leads in mining and extraction sectors. Eighthly, Central Cilacap District has manufacturing, electricity, gas and clean water, building and services as leading sectors. Lastly, North Cilacap District has electricity, gas and clean water, manufacturing, building and services as leading sectors. Abstrak   Tujuan dari penelitian ini adalah menentukan sektor unggulan yang dapat dikembangkan di tiap kecamatan di Kabupaten Cilacap sebagai salah satu daerah growth pole. Alat analisis yang digunakan dalam penelitian ini yaitu location quotient, shift share dan klassen typologi. Hasil penelitian menunjukkan tidak semua kecamatan di kabupaten Cilacap memiliki sektor unggulan. Beberapa daerah yang memiliki sektor unggulan diantaranya adalah  Kecamatan Wanareja hanya memiliki satu sektor unggulan yaitu pertanian. Kedua adalah Kecamatan Kawunganten memiliki dua sektor unggulan yaitu sektor pertanian dan sektor keuangan, persewaan dan jasa perusahaan. Kecamatan Kampung Laut, dimana sektor pertanian pada kecamatan ini sangatlah unggul. Kecamatan kesugihan juga memiliki satu sektor unggulan yaitu

  18. Linking Atmospheric Pollution to Cryospheric Changes over the Third Pole

    Science.gov (United States)

    Kang, S.; Zhang, Q.; Ji, Z.; Li, Y.; Chen, J.; Zhang, G.; Li, C.; Cong, Z.; Chen, P.; Guo, J.; Huang, J.; Tripathee, L.; Rupakheti, D.; Li, X.; Zhang, Y.; Panday, A. K.; Rupakheti, M.

    2016-12-01

    Known as "the Third Pole" (TP), the Tibetan Plateau and surrounding mountains hold the largest aggregate of glaciers outside the pole regions. Recent monitoring and projection indicated an accelerated glacier decline and increasing glacier runoff. The long-range transport of South Asian atmospheric pollutants, including light absorbing impurities (LAIs) such as black carbon (BC) and mineral dust (MD), can absorb the solar radiation in the atmosphere and reduce albedo after being deposited onto the cryosphere, thereby promoting glacier and snow melt. A coordinated atmospheric pollution monitoring network has been launched covering the TP with emphasis on trans-Himalayan transects since 2013. TSP were collected for 24h at an interval of 3-6 days. BC/OC, polycyclic aromatic hydrocarbons (PAHs) and heavy metals were measured. Results reveal a consistent decrease in almost all analyzed parameters from south to north across the Himalayas. Geochemical signatures of carbonaceous aerosols indicate dominant sources of biomass burning and vehicle exhaust, in line with results of PAHs. Integrated analysis of satellite images and air mass trajectories suggest that the trans-boundary air pollution occurred episodically and concentrated in pre-monsoon seasons via upper air circulation, through-valley wind, and local convection. Simulation results showed that carbonaceous aerosols produced positive/negative shortwave radiative forcing in the atmosphere/ground surface. Aerosols increased surface air temperatures by 0.1-0.5° over the TP and decreased temperatures in South Asia during the monsoon season. Surface snow/ice samples were collected from benchmark glaciers to estimate the impacts of LAIs on glacier melt with model assistance. BC (37%) and MD (32%) contribute to the summer melting of Laohugou Glacier in the northern TP. MD (38%) contributed more glacier melt than BC (11%) on Zhadang Glacier in the southern TP. In the southeastern TP, BC and MD contribute to 30% of the

  19. Searching for Terrain Softening near Mercury's North Pole

    Science.gov (United States)

    Cobian, P. S.; Vilas, F.; Lederer, S. M.; Barlow, N. G.

    2004-01-01

    In 1999, following the initial discovery of radar bright craters near both poles of Mercury measured the depth-todiameter (d/D) ratios of 170 impact craters in Mariner 10 images covering four different regions on Mercury s surface. Rapid softening of crater structure, indicated by lower d/D ratios, could indicate the possibility of subsurface water ice in Mercury's terrain originating from an internal source in the planet. Their study included 3 specific radar bright craters suggested to contain ice. They concluded that no terrain softening was apparent, and a rapidly emplaced exogenic water source was the most likely source for the proposed ice in these craters. Recent radar observations of the Mercurian North pole have pinpointed many additional radar bright areas with a resolution 10x better than previous radar measurements, and which correlate with craters imaged by Mariner 10. These craters are correlated with regions that are permanently shaded from direct sunlight, and are consistent with observations of clean water ice. We have expanded the initial study by Barlow et al. to include d/D measurements of 12 craters newly identified as radar bright at latitudes poleward of +80o. The radar reflectivity resemblances to Mars south polar cap and echoes from three icy Galilean satellites suggest that these craters too may have polar ice on Mercury. The effect of subsurface H20 on impact craters is a decrease in its d/D ratio, and softening of crater rims over a period of time. The study of Barlow et al., focused on determining the d/D ratios of 170 impact craters in the Borealis (north polar), Tolstoj (equatorial), Kuiper (equatorial), and Bach (south polar) quadrangles. This work focuses on the newly discovered radar bright craters, investigating their d/D ratios as an expansion of the earlier work..We compare our results to the statistical results from Barlow et al. here. With the upcoming Messenger spacecraft mission to Mercury, this is an especially timely study

  20. Investigation of Wireless Sensor Deployment Schemes for In-Situ Measurement of Water Ice near Lunar South Pole

    Directory of Open Access Journals (Sweden)

    Jayesh P. PABARI

    2009-12-01

    Full Text Available It has been known for many years that the Moon has no atmosphere and hence no stable surface water. Cold traps on the Moon near lunar South Pole are understood to have water ice present in them due to striking of comets and meteorites with the Moon. Observations from very recent lunar missions indicate presence of water on the Moon. However, all such methods are based on remote techniques and no in-situ measurements have been done so far. In order to carry out in situ measurement of water ice and also to study properties of Regolith near lunar South Pole, it is planned to deploy wireless sensor network on lunar surface. Deployment of sensors on a planet or outer body like the Moon is really a challenging task and needs theoretical understanding before implementing through any space mission, as it involves huge amount of investment. In this article, we have attempted to understand theoretical aspects involved in deployment of sensors on the Moon. Minimum number of sensors needed in each topology to cover a given sensing region has been found assuring wireless connectivity. Derived equations governing trajectory of deployment topologies have been executed using code in MATLAB and deployment costs for all three schemes are compared.

  1. Spindle pole cohesion requires glycosylation-mediated localization of NuMA.

    Science.gov (United States)

    Magescas, Jérémy; Sengmanivong, Lucie; Viau, Amandine; Mayeux, Adeline; Dang, Tien; Burtin, Martine; Nilsson, Ulf J; Leffler, Hakon; Poirier, Françoise; Terzi, Fabiola; Delacour, Delphine

    2017-05-03

    Glycosylation is critical for the regulation of several cellular processes. One glycosylation pathway, the unusual O-linked β-N-acetylglucosamine glycosylation (O-GlcNAcylation) has been shown to be required for proper mitosis, likely through a subset of proteins that are O-GlcNAcylated during metaphase. As lectins bind glycosylated proteins, we asked if specific lectins interact with mitotic O-GlcNAcylated proteins during metaphase to ensure correct cell division. Galectin-3, a small soluble lectin of the Galectin family, is an excellent candidate, as it has been previously described as a transient centrosomal component in interphase and mitotic epithelial cells. In addition, it has recently been shown to associate with basal bodies in motile cilia, where it stabilizes the microtubule-organizing center (MTOC). Using an experimental mouse model of chronic kidney disease and human epithelial cell lines, we investigate the role of Galectin-3 in dividing epithelial cells. Here we find that Galectin-3 is essential for metaphase where it associates with NuMA in an O-GlcNAcylation-dependent manner. We provide evidence that the NuMA-Galectin-3 interaction is important for mitotic spindle cohesion and for stable NuMA localization to the spindle pole, thus revealing that Galectin-3 is a novel contributor to epithelial mitotic progress.

  2. Latitudinal trends in shell production cost from the tropics to the poles.

    Science.gov (United States)

    Watson, Sue-Ann; Morley, Simon A; Peck, Lloyd S

    2017-09-01

    The proportion of body mass devoted to skeleton in marine invertebrates decreases along latitudinal gradients from large proportions in the tropics to small proportions in polar regions. A historical hypothesis-that latitudinal differences in shell production costs explain these trends-remains untested. Using field-collected specimens spanning a 79°N to 68°S latitudinal gradient (16,300 km), we conducted a taxonomically controlled evaluation of energetic costs of shell production as a proportion of the total energy budget in mollusks. Shell production cost was fairly low across latitudes at shell cost tended to be lower in tropical species and increased slightly toward the poles. However, shell cost also varied with life stage, with the greatest costs found in young tropical gastropods. Low shell production costs on the energy budget suggest that shell cost may play only a small role in influencing proportional skeleton size gradients across latitudes relative to other ecological factors, such as predation in present-day oceans. However, any increase in the cost of calcium carbonate (CaCO 3 ) deposition, including from ocean acidification, may lead to a projected ~50 to 70% increase in the proportion of the total energy budget required for shell production for a doubling of the CaCO 3 deposition cost. Changes in energy budget allocation to shell cost would likely alter ecological trade-offs between calcification and other drivers, such as predation, in marine ecosystems.

  3. High-mast light poles anchor nut loosening in Alaska : an investigation of field monitoring and finite-element analysis.

    Science.gov (United States)

    2014-09-01

    High mast lighting poles (HMLPs) are tall, roadside structures effective for lighting large areas of highways and intersections. The Alaska Department of Transportation : and Public Facilities (AKDOT&PF) maintains 118 such poles in the greater Anchor...

  4. Resonances in few-body systems

    International Nuclear Information System (INIS)

    Afnan, I.R.

    1990-09-01

    It is shown how the resonance poles of the scattering amplitude correspond to eigenstates of the Hamiltonian that is analytical continued into the complex r-space via the dilatation group transformation, and how the corresponding eigenstates satisfy a modified form of the orthogonality condition. As an illustration of the results, examples of resonances in π - d, and α - d scattering as a three-body system are presented. 11 refs., 4 figs

  5. Atmospheric Fluctuations in the Millimeter Wavelength at the South Pole

    Science.gov (United States)

    Bussmann, R. S.; Holzapfel, W.; Kuo, C. L.

    2003-12-01

    We characterize atmospheric fluctuations by a Kolmogorov power law around the South pole at Millimeter wavelengths by calculating the correlation between signals coming from two separate channels in a detector array. We use data taken with the ACBAR instrument mounted on the Viper telescope over the winter period beginning in April 2002 and ending in August 2002 to generate a model of the atmospheric fluctuations. We use this model to obtain values for the amplitude of the atmospheric fluctuations as well as the angular windspeed causing the movement of the disturbances which are responsible for the emission we observe. The primary benefit of the correlation analysis is to significantly reduce contribution from instrument noise, which is uncorrelated between two channels. Thus we are able to perform a very reliable characterization of the atmosphere. ACBAR was supported by funds from the Center for Astrophysical Research in Antarctica, a National Science Foundation Science and Technology Center. Operational support was provided by the United States Antarctic Program.

  6. The North Galactic Pole Rift and the Local Hot Bubble

    Science.gov (United States)

    Snowden, S. L.; Koutroumpa, D.; Kuntz, K. D.; Lallement, R.; Puspitarini, L.

    2015-01-01

    The North Galactic Pole Rift (NGPR) is one of the few distinct neutral hydrogen clouds at high Galactic latitudes that have well-defined distances. It is located at the edge of the Local Cavity (LC) and provides an important test case for understanding the Local Hot Bubble (LHB), the presumed location for the hot diffuse plasma responsible for much of the observed 1/4 keV emission originating in the solar neighborhood. Using data from the ROSAT All- Sky Survey and the Planck reddening map, we find the path length within the LC (LHB plus Complex of Local Interstellar Clouds) to be 98 plus or minus 27 pc, in excellent agreement with the distance to the NGPR of 98 +/- 6 pc. In addition, we examine another 14 directions that are distributed over the sky where the LC wall is apparently optically thick at 1/4 keV. We find that the data in these directions are also consistent with the LHB model and a uniform emissivity plasma filling most of the LC.

  7. India plans to land near moon's south pole

    Science.gov (United States)

    Bagla, Pallava

    2018-02-01

    Sometime this summer, an Indian spacecraft orbiting over the moon's far side will release a lander. The craft will ease to a soft landing just after lunar sunrise on an ancient, table-flat plain about 600 kilometers from the south pole. There, it will unleash a rover into territory never before explored at the surface. That's the ambitious vision for India's second voyage to the moon in a decade, due to launch in the coming weeks. If Chandrayaan-2 is successful, it will pave the way for even more ambitious Indian missions, such as landings on Mars and an asteroid, as well as a Venus probe. Lunar scientists have much at stake, too. Chandrayaan-2 will collect data on the moon's thin envelope of plasma, as well as isotopes such as helium-3, a potential fuel for future fusion energy reactors. And it will follow up on a stunning discovery by India's first lunar foray, which found water molecules on the moon in 2009.

  8. Resonances and poles in isoscattering microwave networks and graphs.

    Science.gov (United States)

    Ławniczak, Michał; Sawicki, Adam; Bauch, Szymon; Kuś, Marek; Sirko, Leszek

    2014-03-01

    Can one hear the shape of a graph? This is a modification of the famous question of Mark Kac "Can one hear the shape of a drum?" which can be asked in the case of scattering systems such as quantum graphs and microwave networks. It addresses an important mathematical problem whether scattering properties of such systems are uniquely connected to their shapes? Recent experimental results based on a characteristics of graphs such as the cumulative phase of the determinant of the scattering matrices indicate a negative answer to this question [O. Hul, M. Ławniczak, S. Bauch, A. Sawicki, M. Kuś, and L. Sirko, Phys. Rev. Lett. 109, 040402 (2012)]. In this paper we consider important local characteristics of graphs such as structures of resonances and poles of the determinant of the scattering matrices. Using these characteristics we study experimentally and theoretically properties of graphs and directly confirm that the pair of graphs considered in the cited paper is isoscattering. The experimental results are compared to the theoretical ones for a broad frequency range from 0.01 to 3 GHz. In the numerical calculations of the resonances of the graphs absorption present in the experimental networks is taken into account.

  9. Inconspicuous portable audio/visual recording: transforming an IV pole into a mobile video capture stand.

    Science.gov (United States)

    Pettineo, Christopher M; Vozenilek, John A; Kharasch, Morris; Wang, Ernest; Aitchison, Pam; Arreguin, Andrew

    2008-01-01

    Although a traditional simulation laboratory may have excellent installed audio/visual capabilities, often large classes overwhelm the limited space in the laboratory. With minimal monetary investment, it is possible to create a portable audio/visual stand from an old IV pole. An IV pole was transformed into an audio/visual stand to overcome the burden of transporting individual electronic components during a patient safety research project conducted in an empty patient room with a standardized patient. The materials and methods for making the modified IV pole are outlined in this article. The limiting factor of production is access to an old IV pole; otherwise a few purchases from an electronics store complete the audio/visual IV pole. The modified IV pole is a cost-effective and portable solution to limited space or the need for audio/visual capabilities outside of a simulation laboratory. The familiarity of an IV pole in a clinical setting reduces the visual disturbance of relocated audio/visual equipment in a room previously void of such instrumentation.

  10. EVOLUTION OF THE FAR-INFRARED CLOUD AT TITAN’S SOUTH POLE

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, Donald E.; Achterberg, R. K.; Cottini, V.; Anderson, C. M.; Flasar, F. M.; Nixon, C. A.; Bjoraker, G. L.; Kunde, V. G.; Carlson, R. C.; Guandique, E.; Kaelberer, M. S.; Tingley, J. S.; Albright, S. A.; Segura, M. E. [Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Kok, R. de [SRON Netherlands Institute for Space Research, Sorbonnelaan 2, 3584 CA Utrecht (Netherlands); Coustenis, A.; Vinatier, S.; Bampasidis, G. [Laboratoire d’Etudes Spatiales et d’Instrumentation en Astrophysique (LESIA), Observatoire de Paris, CNRS, UPMC Univ. Paris 06, Univ. Paris-Diderot, 5, place Jules Janssen, F-92195 Meudon Cedex (France); Teanby, N. A. [School of Earth Sciences, University of Bristol, Bristol BS8 1RJ (United Kingdom); Calcutt, S., E-mail: donald.e.jennings@nasa.gov [Department of Physics, University of Oxford, Parks Road, Oxford OX1 3PU (United Kingdom)

    2015-05-10

    A condensate cloud on Titan identified by its 220 cm{sup −1} far-infrared signature continues to undergo seasonal changes at both the north and south poles. In the north, the cloud, which extends from 55 N to the pole, has been gradually decreasing in emission intensity since the beginning of the Cassini mission with a half-life of 3.8 years. The cloud in the south did not appear until 2012 but its intensity has increased rapidly, doubling every year. The shape of the cloud at the south pole is very different from that in the north. Mapping in 2013 December showed that the condensate emission was confined to a ring with a maximum at 80 S. The ring was centered 4° from Titan's pole. The pattern of emission from stratospheric trace gases like nitriles and complex hydrocarbons (mapped in 2014 January) was also offset by 4°, but had a central peak at the pole and a secondary maximum in a ring at about 70 S with a minimum at 80 S. The shape of the gas emission distribution can be explained by abundances that are high at the atmospheric pole and diminish toward the equator, combined with correspondingly increasing temperatures. We discuss possible causes for the condensate ring. The present rapid build up of the condensate cloud at the south pole is likely to transition to a gradual decline from 2015 to 2016.

  11. Interaction between Poly(ADP-ribose) and NuMA contributes to mitotic spindle pole assembly.

    Science.gov (United States)

    Chang, Paul; Coughlin, Margaret; Mitchison, Timothy J

    2009-11-01

    Poly(ADP-ribose) (pADPr), made by PARP-5a/tankyrase-1, localizes to the poles of mitotic spindles and is required for bipolar spindle assembly, but its molecular function in the spindle is poorly understood. To investigate this, we localized pADPr at spindle poles by immuno-EM. We then developed a concentrated mitotic lysate system from HeLa cells to probe spindle pole assembly in vitro. Microtubule asters assembled in response to centrosomes and Ran-GTP in this system. Magnetic beads coated with pADPr, extended from PARP-5a, also triggered aster assembly, suggesting a functional role of the pADPr in spindle pole assembly. We found that PARP-5a is much more active in mitosis than interphase. We used mitotic PARP-5a, self-modified with pADPr chains, to capture mitosis-specific pADPr-binding proteins. Candidate binding proteins included the spindle pole protein NuMA previously shown to bind to PARP-5a directly. The rod domain of NuMA, expressed in bacteria, bound directly to pADPr. We propose that pADPr provides a dynamic cross-linking function at spindle poles by extending from covalent modification sites on PARP-5a and NuMA and binding noncovalently to NuMA and that this function helps promote assembly of exactly two poles.

  12. Effect of PF impregnation and surface densification on the mechanical properties of small-scale wood laminated poles

    Science.gov (United States)

    Huaqiang Yu; Chung Y. Hse; Zehui Jiang

    2009-01-01

    The wood poles in the United States are from high-valued trees that are becoming more expensive and less available. Wood laminated composite poles (LCP) are a kind of alternative to solid poles. Considerable interest has developed in last century in the resin impregnation and wood surface densification to improve its physical and mechanical properties. In this...

  13. Structural behaviour of concrete poles used in electric's power distribution network

    Directory of Open Access Journals (Sweden)

    Mehran Zeynalian

    2017-12-01

    Full Text Available Based on a preliminary study on regional electric companies, it is shown that there is no precise structural design on the concrete poles. This leads to uneconomical and overestimated networks’ components. Therefore, this study was aimed to investigate the lateral performance of the concrete poles which are employed in electric’s power distribution network. This paper presents a numerical study on structural performance of 12 m concrete poles used in electric’s power distribution network using Abaqus software. A sensitivity study for mesh size is carried out and concrete damaged plasticity has been employed. The results show that relatively coarse mesh (average in damaged concrete method gives more reliable result. Some experimental tests based on the Iranian standards were performed in order to make a bench mark for numerical output. Comparison between numerical and experimental results indicates a good agreement between the results. The outcomes also suggest that while the applied lateral load is less than around 400 kg which is assumed as the nominal resistance of the pole, no transverse crack occurs. Based on both experimental and numerical results, one or two transverse cracks are reported when the applied force reaches up to 600 kg. The rate of cracks is amplified by increasing the applied force; and finally, the pole would lose its capacity when the load rises much more than 1200 kg. The study also shows that the poles are very weak when the load direction changes. Also, it can be concluded that the final strength of the pole is higher than what the standards recommend. Finally, seismic behavior factor of the poles around both main axes are evaluated. The estimated seismic resistance factor for the concrete poles indicates that the prescribed R factor for such structure is relatively low; and can be improved at least 20%.

  14. Integrated 3D printing and corona poling process of PVDF piezoelectric films for pressure sensor application

    Science.gov (United States)

    Kim, Hoejin; Torres, Fernando; Wu, Yanyu; Villagran, Dino; Lin, Yirong; Tseng, Tzu-Liang(Bill

    2017-08-01

    This paper presents a novel process to fabricate piezoelectric films from polyvinylidene fluoride (PVDF) polymer using integrated fused deposition modeling (FDM) 3D printing and corona poling technique. Corona poling is one of many effective poling processes that has received attention to activate PVDF as a piezoelectric responsive material. The corona poling process occurs when a PVDF polymer is exposed to a high electric field created and controlled through an electrically charged needle and a grid electrode under heating environment. FDM 3D printing has seen extensive progress in fabricating thermoplastic materials and structures, including PVDF. However, post processing techniques such as poling is needed to align the dipoles in order to gain piezoelectric properties. To further simplify the piezoelectric sensors and structures fabrication process, this paper proposes an integrated 3D printing process with corona poling to fabricate piezoelectric PVDF sensors without post poling process. This proposed process, named ‘Integrated 3D Printing and Corona poling process’ (IPC), uses the 3D printer’s nozzle and heating bed as anode and cathode, respectively, to create poling electric fields in a controlled heating environment. The nozzle travels along the programmed path with fixed distance between nozzle tip and sample’s top surface. Simultaneously, the electric field between the nozzle and bottom heating pad promotes the alignment of dipole moment of PVDF molecular chains. The crystalline phase transformation and output current generated by printed samples under different electric fields in this process were characterized by a Fourier transform infrared spectroscopy and through fatigue load frame. It is demonstrated that piezoelectric PVDF films with enhanced β-phase percentage can be fabricated using the IPC process. In addition, mechanical properties of printed PVDF was investigated by tensile testing. It is expected to expand the use of additive

  15. Least 1-Norm Pole-Zero Modeling with Sparse Deconvolution for Speech Analysis

    DEFF Research Database (Denmark)

    Shi, Liming; Jensen, Jesper Rindom; Christensen, Mads Græsbøll

    2017-01-01

    In this paper, we present a speech analysis method based on sparse pole-zero modeling of speech. Instead of using the all-pole model to approximate the speech production filter, a pole-zero model is used for the combined effect of the vocal tract; radiation at the lips and the glottal pulse shape......-zero, linear prediction and sparse linear prediction methods, experimental results show that the proposed speech analysis method has lower spectral distortion, higher reconstruction SNR and sparser residuals....

  16. Frequent POLE1 p.S297F mutation in Chinese patients with ovarian endometrioid carcinoma

    International Nuclear Information System (INIS)

    Zou, Yang; Liu, Fa-Ying; Liu, Huai; Wang, Feng; Li, Wei; Huang, Mei-Zhen; Huang, Yan; Yuan, Xiao-Qun; Xu, Xiao-Yun; Huang, Ou-Ping; He, Ming

    2014-01-01

    The catalytic subunit of DNA polymerase epsilon (POLE1) functions primarily in nuclear DNA replication and repair. Recently, POLE1 mutations were detected frequently in colorectal and endometrial carcinomas while with lower frequency in several other types of cancer, and the p.P286R and p.V411L mutations were the potential mutation hotspots in human cancers. Nevertheless, the mutation frequency of POLE1 in ovarian cancer still remains largely unknown. Here, we screened a total of 251 Chinese samples with distinct subtypes of ovarian carcinoma for the presence of POLE1 hotspot mutations by direct sequencing. A heterozygous somatic POLE1 mutation, p.S297F (c.890C>T), but not p.P286R and p.V411L hotspot mutations observed in other cancer types, was identified in 3 out of 37 (8.1%) patients with ovarian endometrioid carcinoma; this mutation was evolutionarily highly conserved from Homo sapiens to Schizosaccharomyces. Of note, the POLE1 mutation coexisted with mutation in the ovarian cancer-associated PPP2R1A (protein phosphatase 2, regulatory subunit A, α) gene in a 46-year-old patient, who was also diagnosed with ectopic endometriosis in the benign ovary. In addition, a 45-year-old POLE1-mutated ovarian endometrioid carcinoma patient was also diagnosed with uterine leiomyoma while the remaining 52-year-old POLE1-mutated patient showed no additional distinctive clinical manifestation. In contrast to high frequency of POLE1 mutations in ovarian endometrioid carcinoma, no POLE1 mutations were identified in patients with other subtypes of ovarian carcinoma. Our results showed for the first time that the POLE1 p.S297F mutation, but not p.P286R and p.V411L hotspot mutations observed in other cancer types, was frequent in Chinese ovarian endometrioid carcinoma, but absent in other subtypes of ovarian carcinoma. These results implicated that POLE1 p.S297F mutation might be actively involved in the pathogenesis of ovarian endometrioid carcinoma, but might not be actively

  17. Frequent POLE1 p.S297F mutation in Chinese patients with ovarian endometrioid carcinoma

    Energy Technology Data Exchange (ETDEWEB)

    Zou, Yang; Liu, Fa-Ying; Liu, Huai; Wang, Feng [Key Laboratory of Women' s Reproductive Health of Jiangxi Province, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Central Laboratory, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Li, Wei [Key Laboratory of Women' s Reproductive Health of Jiangxi Province, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Central Laboratory, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Graduate School of Nanchang University, Nanchang, Jiangxi 330031 (China); Huang, Mei-Zhen [Graduate School of Nanchang University, Nanchang, Jiangxi 330031 (China); Jiangxi Provincial Cancer Institute, Jiangxi Provincial Cancer Hospital, Nanchang, Jiangxi 330029 (China); Huang, Yan; Yuan, Xiao-Qun [Key Laboratory of Women' s Reproductive Health of Jiangxi Province, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Central Laboratory, Jiangxi Provincial Maternal and Child Health Hospital, Nanchang, Jiangxi 330006 (China); Graduate School of Nanchang University, Nanchang, Jiangxi 330031 (China); Xu, Xiao-Yun [Graduate School of Nanchang University, Nanchang, Jiangxi 330031 (China); Jiangxi Provincial Cancer Institute, Jiangxi Provincial Cancer Hospital, Nanchang, Jiangxi 330029 (China); Huang, Ou-Ping, E-mail: huangouping@gmail.com [Jiangxi Provincial Cancer Institute, Jiangxi Provincial Cancer Hospital, Nanchang, Jiangxi 330029 (China); He, Ming, E-mail: jxhm56@hotmail.com [Department of Pharmacology and Molecular Therapeutics, Nanchang University School of Pharmaceutical Science, Nanchang 330006 (China)

    2014-03-15

    The catalytic subunit of DNA polymerase epsilon (POLE1) functions primarily in nuclear DNA replication and repair. Recently, POLE1 mutations were detected frequently in colorectal and endometrial carcinomas while with lower frequency in several other types of cancer, and the p.P286R and p.V411L mutations were the potential mutation hotspots in human cancers. Nevertheless, the mutation frequency of POLE1 in ovarian cancer still remains largely unknown. Here, we screened a total of 251 Chinese samples with distinct subtypes of ovarian carcinoma for the presence of POLE1 hotspot mutations by direct sequencing. A heterozygous somatic POLE1 mutation, p.S297F (c.890C>T), but not p.P286R and p.V411L hotspot mutations observed in other cancer types, was identified in 3 out of 37 (8.1%) patients with ovarian endometrioid carcinoma; this mutation was evolutionarily highly conserved from Homo sapiens to Schizosaccharomyces. Of note, the POLE1 mutation coexisted with mutation in the ovarian cancer-associated PPP2R1A (protein phosphatase 2, regulatory subunit A, α) gene in a 46-year-old patient, who was also diagnosed with ectopic endometriosis in the benign ovary. In addition, a 45-year-old POLE1-mutated ovarian endometrioid carcinoma patient was also diagnosed with uterine leiomyoma while the remaining 52-year-old POLE1-mutated patient showed no additional distinctive clinical manifestation. In contrast to high frequency of POLE1 mutations in ovarian endometrioid carcinoma, no POLE1 mutations were identified in patients with other subtypes of ovarian carcinoma. Our results showed for the first time that the POLE1 p.S297F mutation, but not p.P286R and p.V411L hotspot mutations observed in other cancer types, was frequent in Chinese ovarian endometrioid carcinoma, but absent in other subtypes of ovarian carcinoma. These results implicated that POLE1 p.S297F mutation might be actively involved in the pathogenesis of ovarian endometrioid carcinoma, but might not be actively

  18. Semiclassical approach to Regge poles trajectories calculations for nonsingular potentials: Thomas-Fermi type

    International Nuclear Information System (INIS)

    Belov, S M; Avdonina, N B; Felfli, Z; Marletta, M; Msezane, A Z; Naboko, S N

    2004-01-01

    A simple semiclassical approach, based on the investigation of anti-Stokes line topology, is presented for calculating Regge poles for nonsingular (Thomas-Fermi type) potentials, namely potentials with singularities at the origin weaker than order -2. The anti-Stokes lines for Thomas-Fermi potentials have a more complicated structure than those of singular potentials and require careful application of complex analysis. The explicit solution of the Bohr-Sommerfeld quantization condition is used to obtain approximate Regge poles. We introduce and employ three hypotheses to obtain several terms of the Regge pole approximation

  19. High-resolution second-harmonic microscopy of poled silica waveguides

    DEFF Research Database (Denmark)

    Beermann, Jonas; Bozhevolnyi, Sergey I.; Pedersen, Kjeld

    2003-01-01

    A second-harmonic scanning optical microscopy (SHSOM) apparatus operating in reflection is used for high-resolution imaging of second-order optical non-linearities (SONs) in electric-field poled silica-based waveguides. SHSOM of domain walls in a periodically poled KTiOPO4 crystal is performed......, and the spatial resolution at the pump wavelength of 790 nm is determined to be better than 0.7 m. SHSOM images of positively poled silica waveguides were obtained for different polarization combinations of the incident pump beam and the detected second-harmonic radiation. Calibration of the SHSOM with a GaAs-sample...

  20. Integrated fiber Michelson interferometer based on poled hollow twin-core fiber.

    Science.gov (United States)

    Liu, Zhihai; Bo, Fusen; Wang, Lei; Tian, Fengjun; Yuan, Libo

    2011-07-01

    We propose an integrated fiber Michelson interferometer based on a poled hollow twin-core fiber. The Michelson interferometer can be used as an electro-optic modulator by thermal poling one core of the twin-core fiber and introducing second-order nonlinearity in the fiber. The proposed fiber Michelson interferometer is experimentally demonstrated under driving voltages at the frequency range of 149 to 1000 Hz. The half-wave voltage of the poled fiber is 135 V, and the effective second-order nonlinear coefficient χ² is 1.23 pm/V.

  1. Raman probes based on optically-poled double-clad fiber and coupler

    DEFF Research Database (Denmark)

    Brunetti, Anna Chiara; Margulis, Walter; Rottwitt, Karsten

    2012-01-01

    Two fiber Raman probes are presented, one based on an optically-poled double-clad fiber and the second based on an optically-poled double-clad fiber coupler respectively. Optical poling of the core of the fiber allows for the generation of enough 532nm light to perform Raman spectroscopy...... of a sample of dimethyl sulfoxide (DMSO), when illuminating the waveguide with 1064nm laser light. The Raman signal is collected in the inner cladding, from which it is retrieved with either a bulk dichroic mirror or a double-clad fiber coupler. The coupler allows for a substantial reduction of the fiber...

  2. Annihilation diagrams in two-body nonleptonic decays of charmed mesons

    International Nuclear Information System (INIS)

    Bedaque, P.; Das, A.; Mathur, V.S.

    1994-06-01

    In the pole-dominance model for the two-body nonleptonic decays of charmed mesons D → PV and D → VV, it is shown that the contributions of the intermediate pseudoscalar and the axial-vector meson poles cancel each other in the annihilation diagrams in the chiral limit. In the same limit, the annihilation diagrams for the D → PP decays vanish independently. (author). 6 refs, 3 figs

  3. Crack growth during poling and polarisation reversal in commercial piezoceramics

    Directory of Open Access Journals (Sweden)

    Algueró, M.

    1999-12-01

    Full Text Available The growth of Vicker´s cracks during the poling of piezoelectric ceramics was studied for two PZT based compositions with different tetragonal distortion of the perovskite structure. Studies on the two compositions with different poling electric fields and similar initial crack lengths showed that crack growth was not proportional to the induced stress free longitudinal strain by 90º domain reorientation. This observation is not consistent with the previously proposed mechanism of crack growth based on a strain mismatch between the material at the crack flanks and the rest of the ceramic. This mismatch was proposed to occur because of the reduction of the electric field within the crack flanks. The reasons for the disappearance of the mismatch are discussed here, and an alternative mechanism of crack growth consistent with our results is proposed, which takes into account the electrically induced stress gradient at the crack tip, produced by the piezoelectric effect. Cracks were also found to grow during a small number of subsequent polarisation reversals, the explanation of which must be due to some other additional effect.

    Se ha estudiado el crecimiento de grietas Vicker durante la polarización de cerámicas piezoeléctricas para dos modificaciones del PZT con distinta distorsión tetragonal de la estructura perovskita. Los resultados en función del campo eléctrico de polarización y la longitud inicial de la grieta muestran que el crecimiento no es proporcional a la deformación libre de tensión inducida por orientación de dominios de 90º. Esta observación no es consistente con el mecanismo de crecimiento de grieta propuesto anteriormente, basado en el desajuste de deformación entre el material a los flancos de la grieta y el resto de la cerámica. Este desajuste se producía por la atenuación del campo eléctrico en los flancos de la grieta. Se discute la causa de la desaparición de este desajuste de deformación, y se

  4. Periods, poles, and shapes of Saturn's irregular moons

    Science.gov (United States)

    Denk, Tilmann; Mottola, Stefano

    2016-10-01

    We report rotational-lightcurve observations of irregular moons of Saturn based on disk-integrated observations with the Narrow-Angle Camera of the Cassini spacecraft. From 24 measured rotation periods, 20 are now known with an accuracy of ~2% or better. The numbers are as follows (in hours; an '*' marks the less reliable periods): Hati 5.42; Mundilfari 6.74; Loge 6.94*; Skoll 7.26; Kari 7.70; Suttungr 7.82*, Bergelmir 8.13; Phoebe 9.274; Siarnaq 10.188; Narvi 10.21; Tarvos 10.69; Skathi 11.30; Ymir 11.922; Hyrrokkin 12.76; Greip 12.79*; Ijiraq 13.03; Albiorix 13.32; Bestla 14.624; Bebhionn 16.40; Paaliaq 18.75; Kiviuq 21.96; Erriapus 28.15; Thrymr 35 or >45* Tarqeq 76.8.More recent data strengthen the notion that objects in orbits with an inclination supplemental angle i' > 27° have significantly slower spin rates than those at i' 27°, Siarnaq, stands opposed to at least eight objects with faster spins and i' 27° bin contains all nine known prograde moons and four retrograde objects.A total of 25 out of 38 known outer moons has been observed with Cassini, and there is no chance to observe the 13 missing objects until end-of-mission. However, all unobserved objects are part of the i' 27° are known, and none of them is a fast rotator, with no exception.Several objects were observed repeatedly to determine pole directions, sidereal periods, and convex shapes. A few lightcurves have been observed to show three maxima and three minima even at low phase angles, suggesting objects with a triangular equatorial cross-section. Some objects with 2 maxima/ 2 minima are probably quite elongated. One moon even shows lightcurves with 4 maxima/ 4 minima.

  5. Cassini Returns to Saturn's Poles: Seasonal Change in the Polar Vortices

    Science.gov (United States)

    Fletcher, Leigh N.; Orton, G. S.; Irwin, P. G. J.; Sinclair, J. A.; Hesman, B. E.; Hurley, J.; Bjoraker, G. L.; Simon-Miller, A. A.

    2013-01-01

    High inclination orbits during Cassini's solstice mission (2012) are providing us with our first observations of Saturn's high latitudes since the prime mission (2007). Since that time, the northern spring pole has emerged into sunlight and the southern autumn pole has disappeared into winter darkness, allowing us to study the seasonal changes occurring within the polar vortices in response to these dramatic insolation changes. Observations from the Cassini Composite Infrared Spectrometer] have revealed (i) the continued presence of small, cyclonic polar hotspots at both spring and autumn poles; and (ii) the emergence of an infrared-bright polar vortex at the north pole, consistent with the historical record of Saturn observations from the 1980s (previous northern spring).

  6. Detection of Street Light Poles in Road Scenes from Mobile LIDAR Mapping Data for its Applications

    Science.gov (United States)

    Talebi Nahr, S.; Saadatseresht, M.; Talebi, J.

    2017-09-01

    Identification of street light poles is very significant and crucial for intelligent transportation systems. Automatic detection and extraction of street light poles are a challenging task in road scenes. This is mainly because of complex road scenes. Nowadays mobile laser scanners have been used to acquire three-dimensional geospatial data of roadways over a large area at a normal driving speed. With respect to the high density of such data, new and beneficial algorithms are needed to extract objects from these data. In this article, our proposed algorithm for extraction of street light poles consists of five main steps: 1. Preprocessing, 2. Ground removal, 3. 3D connected components analysis, 4. Local geometric feature generation, 5. Extraction of street light poles using Bhattacharya distance metric. The proposed algorithm is tested on two rural roadways, called Area1 and Area2. Evaluation results for Area1 report 0.80, 0.72 and 0.62 for completeness, correctness and quality, respectively.

  7. On PID Controller Design by Combining Pole Placement Technique with Symmetrical Optimum Criterion

    Directory of Open Access Journals (Sweden)

    Viorel Nicolau

    2013-01-01

    Full Text Available In this paper, aspects of analytical design of PID controllers are studied, by combining pole placement technique with symmetrical optimum criterion. The proposed method is based on low-order plant model with pure integrator, and it can be used for both fast and slow processes. Starting from the desired closed-loop transfer function, which contains a second-order oscillating system and a lead-lag compensator, it is shown that the zero value depends on the real-pole value of closed-loop transfer function. In addition, there is only one pole value, which satisfies the assumptions of symmetrical optimum criterion imposed to open-loop transfer function. In these conditions, by combining the pole placement technique with symmetrical optimum criterion, the analytical expressions of the controller parameters can be simplified. For simulations, PID autopilot design for heading control problem of a conventional ship is considered.

  8. Major Ion Concentrations in 2004 South Pole Ice Core, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — A 180 m ice core drilled at South Pole in 2004/2005 was analyzed for concentrations of major ions at a depth resolution of approximately 2 cm. Measured ions are...

  9. Sulfate-Based Volcanic Record from South Pole Ice Core, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains concentrations of soluble chemical species (ions) within a 120 m ice core retrieved at the South Pole station in 2001. The ice core was dated...

  10. Requirements for NuMA in maintenance and establishment of mammalian spindle poles.

    Science.gov (United States)

    Silk, Alain D; Holland, Andrew J; Cleveland, Don W

    2009-03-09

    Microtubules of the mitotic spindle in mammalian somatic cells are focused at spindle poles, a process thought to include direct capture by astral microtubules of kinetochores and/or noncentrosomally nucleated microtubule bundles. By construction and analysis of a conditional loss of mitotic function allele of the nuclear mitotic apparatus (NuMA) protein in mice and cultured primary cells, we demonstrate that NuMA is an essential mitotic component with distinct contributions to the establishment and maintenance of focused spindle poles. When mitotic NuMA function is disrupted, centrosomes provide initial focusing activity, but continued centrosome attachment to spindle fibers under tension is defective, and the maintenance of focused kinetochore fibers at spindle poles throughout mitosis is prevented. Without centrosomes and NuMA, initial establishment of spindle microtubule focusing completely fails. Thus, NuMA is a defining feature of the mammalian spindle pole and functions as an essential tether linking bulk microtubules of the spindle to centrosomes.

  11. REGION NORTH OF TEACHER EDUCATION POLICY AND EVALUATION OF POLES OPEN UNIVERSITY SYSTEM OF BRAZIL

    Directory of Open Access Journals (Sweden)

    Celso José da Costa

    2013-03-01

    Full Text Available This text aims to present, in general, the north region and policies for teacher training implemented in the last 5 years, locating in this context the importance of the Brazil Open University system and its supporting poles face as methodology research linked to the project "Institutionalization of Distance Education in Brazil." Greater emphasis will be given to data from the states of Pará and Acre, given that two authors of this text act as coordinators of the poles supporting attendance System Open University of Brazil in these states. We design the text, based on testimony of poles coordinators who participated in participatory research, conducted by the Research Group "Teacher education and information and communication technologies", LANTE / UFF. We aim also to identify the structure and functioning of the Poles face Supporting UAB in the North as well as the assessment tool applied in this region.

  12. Repair of impact damaged utility poles with fiber reinforced polymers (FRP), phase II.

    Science.gov (United States)

    2015-06-01

    Vehicle collisions with steel or aluminum utility poles are common occurrences that yield substantial but often repairable : damage. This project investigates the use of a fiber-reinforced polymer (FRP) composite system for in situ repair that : mini...

  13. Performance analysis of variable speed multiphase induction motor with pole phase modulation

    Directory of Open Access Journals (Sweden)

    Liu Huijuan

    2016-09-01

    Full Text Available The pole phase modulation (PPM technique is an effective method to extend speed range and torque capabilities for an integrated starter and hybrid electric vehicles applications. In this paper, the five pole-phase combination types of a multiphase induction motor (IM with 36 stator slots and 36 stator conductors are presented and compared quantitatively by using the time-stepping finite element method (TS-FEM. The 36 stator conductors of the proposed multiphase IM are fed by a 36 leg inverter and the current phase angle and amplitude of each stator conductor can be controlled independently. This paper focuses on the winding connection, the PPM technique and the performance comparative analysis of each pole-phase combination types of the proposed multiphase IM. The flux distribution, air-gap flux density, output torque, core losses and efficiency of five pole-phase combination types have been investigated.

  14. Subtotal splenectomy preserving the inferior splenic pole for the treatment of Hodgkin’s lymphoma

    Directory of Open Access Journals (Sweden)

    Andy Petroianu

    2017-01-01

    Conclusion: Subtotal splenectomy is efficacious to preserve the splenic functions and to prevent adverse effects of a large spleen on the treatment of Hodgkin’s lymphoma confined to superior pole and producing significant abdominal symptoms and hematological effects.

  15. Smarandache Curves In Terms of Sabban Frame of Fixed Pole Curve

    Directory of Open Access Journals (Sweden)

    Süleyman Şenyurt

    2016-06-01

    Full Text Available In this paper, we study the special Smarandache curve interms of Sabban frame of Fixed Pole curve and we give some characterization of Smarandache curves. Besides, we illustrate examples of our results.

  16. Foreign Body

    Science.gov (United States)

    ... SearchingPediatrics.com Pediatrics Common Questions, Quick Answers Foreign Body Donna D'Alessandro, M.D. Lindsay Huth, B. ... I call the doctor? What is a foreign body? A foreign body is when an object is ...

  17. Biomechanical characteristics and speed adaptation during kick double poling on roller skis in elite cross-country skiers.

    Science.gov (United States)

    Göpfert, Caroline; Holmberg, Hans-Christer; Stöggl, Thomas; Müller, Erich; Lindinger, Stefan Josef

    2013-06-01

    Recent developments in cross-country ski racing should promote the use of kick double poling. This technique, however, has not been the focus in athletes' training and has barely been investigated. The aims of the present study were to develop a function-based phase definition and to analyse speed adaptation mechanisms for kick double poling in elite cross-country skiers. Joint kinematics and pole/plantar forces were recorded in 10 athletes while performing kick double poling at three submaximal roller skiing speeds. A speed increase was associated with increases in cycle length and rate, while absolute poling and leg push-off durations shortened. Despite maintained impulses of force, the peak and average pole/leg forces increased. During double poling and leg push-off, ranges of motion of elbow flexion and extension increased (p aspects for technique training.

  18. Characteristics of Hybrid Type Switched Reluctance Motor with Salient Pole Stator

    Science.gov (United States)

    Oyama, Jun; Higuchi, Tsuyoshi; Abe, Takashi; Koga, Takahiro

    In this paper, we propose a new Hybrid type SRM with salient pole stator, which has a pair of permanent magnets attached symmetrically between the iron poles of the rotor. The paper describes experimental results of not only basic characteristics of the Hybrid SRM but also characteristics with current control loop under optimized advanced firing angle and cut-off angle. Considerable improvement of machine performance, especially efficiency and power factor, in the Hybrid SRM over conventional VR type SRM is confirmed.

  19. STS-47 MS Jemison extends side hatch mockup CES pole during JSC training

    Science.gov (United States)

    1992-01-01

    STS-47 Endeavour, Orbiter Vehicle (OV) 105, Mission Specialist (MS) Mae C. Jemison extends crew escape system (CES) pole through a side hatch mockup during launch emergency egress (bailout) training in JSC's Mockup and Integration Laboratory (MAIL) Bldg 9A. MS Jerome Apt (right) looks on. The crewmembers practiced extending the CES pole prior to donning their launch and entry suits (LESs) and conducting the simulation in the Crew Compartment Trainer (CCT).

  20. Lowering the pump power requirement for squeezed light generation using a periodically poled crystal

    DEFF Research Database (Denmark)

    Andersen, Ulrik Lund; Buchhave, Preben

    2003-01-01

    Observations of continuous wave bright squeezed light from an intra-cavity periodically poled KTP second harmonic generator are presented. The experiment includes characterization of the classical as well as the quantum properties of the system.......Observations of continuous wave bright squeezed light from an intra-cavity periodically poled KTP second harmonic generator are presented. The experiment includes characterization of the classical as well as the quantum properties of the system....

  1. Batwing versus Wise pattern mammoplasty for upper pole breast tumours: a detailed comparison of cosmetic outcome

    OpenAIRE

    Hashem, Tarek; Farahat, Ahmed

    2017-01-01

    Background The aim of this study is to compare the results of batwing mammoplasty and Wise pattern mammoplasty in the surgical management of upper pole breast tumours. Methods This is a retrospective observational study including 126 breast cancer patients who presented between 2009 and 2015 to the National Cancer Institute of Cairo University in Egypt. All patients were candidates for breast conservation, with upper pole tumours, which was defined as tumours between 3 and 9 o?clock. Patients...

  2. Preliminary Analyses of Transmedia Adaptations of Pictorial Narratives and Aesthetic Pole Interpretations: Reflections on Theory

    Directory of Open Access Journals (Sweden)

    Yu-Chai Lai

    2015-10-01

    Full Text Available Transmedia narratives are a key topic of communication research. Transmedia adaptations occur when a narrator transposes an original work by using various media platforms. Considering pictorial turn, this study employed the intermediality of an animated work that was adapted from an award-winning picture book as an example to propose an analysis for theory building. After examining the literature on transmedia narratives, intermediality, and aesthetic communication, this study proposed analyses for the dimensions of transmedia adaptations of pictorial narratives and aesthetic pole interpretations. Focusing on the three layers of the artistic pole, aesthetic pole, and interactions and effects, this study cited the cases of award-winning picture books and adapted animated works as the basis for reflecting on aesthetic communication. The artistic pole of transmedia adaptation was used as an example of how a narrator employs intermediality by citing the pictures, plot, or art forms from an original work to reinvent structures and then adapts them according to intermediality. If the aesthetic pole views the adapted animated work after reading the picture book or forms an expectation of the adaptation because of intermediality, then when the audience watches the adapted animated work, their imagination could be stimulated by the intermediality (i.e., picture book graphics and scene depictions. For transmedia narrative interaction, the aesthetic pole must “fill blanks” or “negate” to continue to view the adaptation. For filling blanks, because of intermediality, the aesthetic pole must construct an “intracompositional intermediality” to connect with the visual and audio links of the same work or construct “extracompositional intermedialtiy” to associate the original work with the transmedia adaptation. For negation, when viewing the adaptation (i.e., presentation of picture book graphics, added music, or theme song, the aesthetic pole

  3. CABLE MECHANISMS USED FOR ACTUATING CAR ELEVATORS WITH 2 AND 4 POLES

    Directory of Open Access Journals (Sweden)

    Dan MESARICI

    2015-05-01

    Full Text Available This paper presents the kinematic scheme and the operating mode of the cable mechanism used for car elevators with 2 and 4 poles. In order to increase the efficiency of the 4- pole elevator, we suggest using a new hoists type cable mechanism, which can multiply the piston travel inside the actuating cylinder twice at the platform level, when lifting and lowering.

  4. Endoscopic extradural supraorbital approach to the temporal pole and adjacent area: technical note.

    Science.gov (United States)

    Komatsu, Fuminari; Imai, Masaaki; Shigematsu, Hideaki; Aoki, Rie; Oda, Shinri; Shimoda, Masami; Matsumae, Mitsunori

    2017-08-25

    The authors' initial experience with the endoscopic extradural supraorbital approach to the temporal pole and adjacent area is reported. Fully endoscopic surgery using the extradural space via a supraorbital keyhole was performed for tumors in or around the temporal pole, including temporal pole cavernous angioma, sphenoid ridge meningioma, and cavernous sinus pituitary adenoma, mainly using 4-mm, 0° and 30° endoscopes and single-shaft instruments. After making a supraorbital keyhole, a 4-mm, 30° endoscope was advanced into the extradural space of the anterior cranial fossa during lifting of the dura mater. Following identification of the sphenoid ridge, orbital roof, and anterior clinoid process, the bone lateral to the orbital roof was drilled off until the dura mater of the anterior aspect of the temporal lobe was exposed. The dura mater of the temporal lobe was incised and opened, exposing the temporal pole under a 4-mm, 0° endoscope. Tumors in or around the temporal pole were safely removed under a superb view through the extradural corridor. The endoscopic extradural supraorbital approach was technically feasible and safe. The anterior trajectory to the temporal pole using the extradural space under endoscopy provided excellent visibility, allowing minimally invasive surgery. Further surgical experience and development of specialized instruments would promote this approach as an alternative surgical option.

  5. Regge-pole description of potential scattering by means of the phase-integral method

    International Nuclear Information System (INIS)

    Amaha, A.

    1992-01-01

    The application of Regge-pole theory to different atomic and molecular scattering has shown to have promising interpretational power in the differential cross sections. Differential cross sections can be analysed in terms of interference between the 'background' amplitude and a few Regge-pole positions of the scattering matrix (S matrix) representing surface waves around the interaction region. By the analytic continuation of the radial Schroedinger differential equation into the complex plane of angular momentum one can determine the analytic properties of the S matrix which contains the physical information in the scattering processes. For interaction potentials fulfilling certain properties, the study of the S matrix leads to the study of the F matrix introduced by Froeman and Froeman for the treatment of connection problems for phase-integral solutions of the differential equation. In this thesis the quantum mechanical scattering problem is analysed in the framework of Regge-pole theory with the use of the complex-angular-momentum formalism. To determine the S matrix, the relevant F matrix elements which give the stokes constants are derived and their properties are studied. The poles of the S matrix for particular complex values of the angular momentum quantum number are the Regge-poles. Using the Regge-pole positions and residues together with the background integral, the differential cross sections are calculated and compared with corresponding partial-wave representations

  6. Pole-Shaped Object Detection Using Mobile LIDAR Data in Rural Road Environments

    Science.gov (United States)

    Yadav, M.; Husain, A.; Singh, A. K.; Lohani, B.

    2015-08-01

    Pole-shaped objects (PSOs) located along a road play key role in road safety and planning. Automation is required for calculating the numbers of trees need to be removed and utility poles need to be relocated during rural road widening. Road-side poles are among the most frequently struck road-side objects during road-side accidents. An automatic method is therefore proposed for detecting PSOs using LiDAR point cloud captured along the roadway using Mobile LiDAR system. The proposed method is tested on the point cloud data of rural road environment in India. Dataset of study area having text file size of 1.22 GB is processed in 13 minutes resulting in completeness of 88.63 % and correctness of 95.12 % in identifying PSOs within 10m of the road boundary. In data of across road coverage of 5m of the road boundary, the completeness of 93.10 % and correctness of 100% are achieved. Poles attached with other objects, tilted poles and the poles occluded by tree branches and shrubs are detected by the proposed method.

  7. Posterior Pole Sparing Laser Photocoagulation Combined with Intravitreal Bevacizumab Injection in Posterior Retinopathy of Prematurity

    Directory of Open Access Journals (Sweden)

    Rebecca Kim

    2014-01-01

    Full Text Available Purpose. To report the results of the posterior pole sparing laser photocoagulation combined with intravitreal bevacizumab injection (IVB in retinopathy of prematurity (ROP. Methods. A retrospective chart review of premature babies with ROP, all of whom received laser photocoagulation with IVB. Eleven eyes of 6 infants with advanced zone I ROP underwent laser ablation sparing posterior pole with concurrent IVB. The results were compared with those of full-laser treatment combined with IVB to 8 eyes of 5 infants with advanced ROP without involvement of the posterior pole. Results. The posterior pole sparing laser with IVB was performed with zone I, stage 3+ ROP at the mean postmenstrual age of 36 weeks and 5 days. The plus sign decreased significantly at postoperative day 1, the neovascular proliferation regressed by postoperative week 1, and the normal vascularization started at postoperative day 32 on the average. Two months after treatment, vascularization of the spared avascular area was completed. There was no macular dragging, tractional retinal detachment, foveal destruction by laser scars, or any other adverse event. No significant anatomical differences were identified from those of full-laser ablation combined with IVB. Conclusions. Posterior pole sparing laser with IVB can give favorable results without destruction of posterior pole retina.

  8. Analysis of the growth poles in esthetic dentistry

    Directory of Open Access Journals (Sweden)

    Andreea Dana Tudose

    2015-05-01

    Full Text Available Growth poles are considered dynamic elements of economic growth, responsible for economical technogical, ideological, spiritual and moral integration.Bioeconomy is currently an area of great and mighty power development. High complexity of this field is to combine the use of technologies that use biological resources in the range of human values involved. This study requires that objective SWOT analysis applied in dental esthetics with strict reference to the quality of work in relation to aesthetic and functional effectiveness of the treatment, the life, the method of reconstruction, working technique, the degree of invasiveness of treatment in relation to conservation dental tissues ,execution costs, costs of resources used in dental anterior segment reconstruction and economic analysis of the modalities of treatment techniques reported the need and level of understanding of patients on treatment aesthetic-functional complexity. As material and method took into account the interaction of four factors: Strenghts-Weaknesses-Opportunities -Hazards. In group “Strengths” we have included successful treatment aesthetic-functional execution moderate cost, short time working on the seat, which shows limited use of natural resources. In group “Weaknesses” I included invasiveness of biological treatment, increased during execution of the work, aesthetic-functional failure , lack of training practitioners in dental aesthetics, lack of existant cabinets to promote interest in aesthetic dental medicine. “Opportunities” referred to the minimally invasive treatment of dental tissue in existing clinical context with predictable results, as higher interest of patients for dental esthetics, raising the standard of care internationally. In group “Risks” (threats I listed: low resistance while works (weak predictability, decreasing purchasing power, changing customer preferences, increase service quality standards. In the second chapter we

  9. Catastrophic injuries in pole vaulters: a prospective 9-year follow-up study.

    Science.gov (United States)

    Boden, Barry P; Boden, Matthew G; Peter, Rebecca G; Mueller, Fred O; Johnson, Jan E

    2012-07-01

    A prior review of catastrophic pole vaulting injuries from 1982 through 1998 revealed an average of 2.0 injuries per year, with 69% (1.38 per year) of the injuries secondary to athletes landing off the sides or back of the landing pad and 25% (0.5 per year) from athletes landing in the vault box. In 2003, several rule changes for the sport of pole vaulting were mandated, including enlarging the minimum dimensions of the landing pad. Our goals were to (1) identify the post-2003 rule change incidence and profile of catastrophic pole vaulting injuries through 2011 and compare them, where possible, with the prior incidence and profile and (2) determine, via a questionnaire, the frequency with which pole vaulters land in the vault box. We hypothesized that the new, larger landing pads would reduce the number of catastrophic injuries. Descriptive epidemiology study. We prospectively reviewed all catastrophic pole vaulting injuries (ie, brain hemorrhage; skull, spine, or pelvic fracture; substantial pulmonary or intra-abdominal injury) in the United States from 2003 through 2011, surveyed 3335 pole vaulters to determine the frequency of landing in the vault box, and compared results with those in the literature. From 2003 to 2011, 19 catastrophic injuries occurred (average of 2.1 per year), with the majority (n = 14, 74%, 1.55 per year) landing in or around the vault box. Four (21%, 0.44 per year) injuries occurred when an athlete landed off the sides or back of the landing pad and 1 (5%) when the pole broke. There were 11 (58%) major head injuries (1 fatality), 4 (21%) spine fractures (1 with paraplegia), 2 (11%) pelvic fractures (both with intra-abdominal injuries), 1 (5%) brain stem injury (fatal), and 1 (5%) thoracic injury (rib fractures and pneumothorax). The annual fatality rate fell from 1.0 in the prior study to 0.22 in the current study. According to the pole vaulters survey, during their careers, 77.12% (n = 2572) landed in the vault box 1 to 3 times, 15.92% (n

  10. CURRENT STATUS OF THE POLE-AND-LINE FISHERY IN EASTERN PART OF INDONESIA

    Directory of Open Access Journals (Sweden)

    Agustinus Anung Widodo

    2016-12-01

    Full Text Available The promotion of pole-and-line fishery for a selective gear operating in the Indonesian tuna management area is considered as the proper policy in response to the increasing market demand with tuna eco-labeled. Appropriate information in addressing the current status of the pole-and-line fishery in Indonesia is an important step in order to support the promotion. Data used to describe the fishery were obtained through scientific port sampling program in collaboration between RCFMC and WCPFC in 2010 to 2014 and also scientific observer onboard program collaboration RCFMC and CRAC Co. Ltd. in 2013. The results show that presently the number of pole and line fleets was decreased significantly and remain about 232 fleetsin Sorong, Bitung and Kendari and Larantuka. The national annual total catch of pole-and line during 1980 – 2013 was recorded between 24,000 and 160,000 tons per year (average 98,117 tons per year. This value is estimated to contribute about 20% of Indonesia annual total catch of tuna in FMAs713-717. The pole-andline catch rates based at Bitung, Kendari and Sorong were fluctuated in each year with the range respective between 8.79 and 17.93 tons/trip/vessel, 4.78 and 5.36 ton/trip/vessel and about 7,99 ton ton/trip/vessel. Pole-and-line fishery operated in Indonesian FMAs 713-717 is considered as selective fishery, with > 80 % catches of skipjack in matured stage. The tuna-live bait fish ratio in Indonesian pole-and-line was 4.41 :1, then an improvement of live bait ratio as well as its management is required.

  11. Cdc14 phosphatase directs centrosome re-duplication at the meiosis I to meiosis II transition in budding yeast [version 2; referees: 3 approved, 1 approved with reservations

    Directory of Open Access Journals (Sweden)

    Colette Fox

    2017-02-01

    Full Text Available Background Gametes are generated through a specialized cell division called meiosis, in which ploidy is reduced by half because two consecutive rounds of chromosome segregation, meiosis I and meiosis II, occur without intervening DNA replication. This contrasts with the mitotic cell cycle where DNA replication and chromosome segregation alternate to maintain the same ploidy. At the end of mitosis, cyclin-dependent kinases (CDKs are inactivated. This low CDK state in late mitosis/G1 allows for critical preparatory events for DNA replication and centrosome/spindle pole body (SPB duplication. However, their execution is inhibited until S phase, where further preparatory events are also prevented. This “licensing” ensures that both the chromosomes and the centrosomes/SPBs replicate exactly once per cell cycle, thereby maintaining constant ploidy. Crucially, between meiosis I and meiosis II, centrosomes/SPBs must be re-licensed, but DNA re-replication must be avoided. In budding yeast, the Cdc14 protein phosphatase triggers CDK down regulation to promote exit from mitosis. Cdc14 also regulates the meiosis I to meiosis II transition, though its mode of action has remained unclear. Methods Fluorescence and electron microscopy was combined with proteomics to probe SPB duplication in cells with inactive or hyperactive Cdc14. Results We demonstrate that Cdc14 ensures two successive nuclear divisions by re-licensing SPBs at the meiosis I to meiosis II transition. We show that Cdc14 is asymmetrically enriched on a single SPB during anaphase I and provide evidence that this enrichment promotes SPB re-duplication. Cells with impaired Cdc14 activity fail to promote extension of the SPB half-bridge, the initial step in morphogenesis of a new SPB. Conversely, cells with hyper-active Cdc14 duplicate SPBs, but fail to induce their separation. Conclusion Our findings implicate reversal of key CDK-dependent phosphorylations in the differential licensing of

  12. Cdc14 phosphatase directs centrosome re-duplication at the meiosis I to meiosis II transition in budding yeast.

    Science.gov (United States)

    Fox, Colette; Zou, Juan; Rappsilber, Juri; Marston, Adele L

    2017-01-05

    Background Gametes are generated through a specialized cell division called meiosis, in which ploidy is reduced by half because two consecutive rounds of chromosome segregation, meiosis I and meiosis II, occur without intervening DNA replication. This contrasts with the mitotic cell cycle where DNA replication and chromosome segregation alternate to maintain the same ploidy. At the end of mitosis, CDKs are inactivated. This low CDK state in late mitosis/G1 allows for critical preparatory events for DNA replication and centrosome/spindle pole body (SPB) duplication. However, their execution is inhibited until S phase, where further preparatory events are also prevented. This "licensing" ensures that both the chromosomes and the centrosomes/SPBs replicate exactly once per cell cycle, thereby maintaining constant ploidy. Crucially, between meiosis I and meiosis II, centrosomes/SPBs must be re-licensed, but DNA re-replication must be avoided. In budding yeast, the Cdc14 protein phosphatase triggers CDK down regulation to promote exit from mitosis. Cdc14 also regulates the meiosis I to meiosis II transition, though its mode of action has remained unclear. Methods Fluorescence and electron microscopy was combined with proteomics to probe SPB duplication in cells with inactive or hyperactive Cdc14. Results We demonstrate that Cdc14 ensures two successive nuclear divisions by re-licensing SPBs at the meiosis I to meiosis II transition. We show that Cdc14 is asymmetrically enriched on a single SPB during anaphase I and provide evidence that this enrichment promotes SPB re-duplication. Cells with impaired Cdc14 activity fail to promote extension of the SPB half-bridge, the initial step in morphogenesis of a new SPB. Conversely, cells with hyper-active Cdc14 duplicate SPBs, but fail to induce their separation. Conclusion Our findings implicate reversal of key CDK-dependent phosphorylations in the differential licensing of cyclical events at the meiosis I to meiosis I

  13. Influence of Hypoxic Interval Training and Hyperoxic Recovery on Muscle Activation and Oxygenation in Connection with Double-Poling Exercise.

    Directory of Open Access Journals (Sweden)

    Christoph Zinner

    Full Text Available Here, we evaluated the influence of breathing oxygen at different partial pressures during recovery from exercise on performance at sea-level and a simulated altitude of 1800 m, as reflected in activation of different upper body muscles, and oxygenation of the m. triceps brachii. Ten well-trained, male endurance athletes (25.3±4.1 yrs; 179.2±4.5 cm; 74.2±3.4 kg performed four test trials, each involving three 3-min sessions on a double-poling ergometer with 3-min intervals of recovery. One trial was conducted entirely under normoxic (No and another under hypoxic conditions (Ho; FiO2 = 0.165. In the third and fourth trials, the exercise was performed in normoxia and hypoxia, respectively, with hyperoxic recovery (HOX; FiO2 = 1.00 in both cases. Arterial hemoglobin saturation was higher under the two HOX conditions than without HOX (p<0.05. Integrated muscle electrical activity was not influenced by the oxygen content (best d = 0.51. Furthermore, the only difference in tissue saturation index measured via near-infrared spectroscopy observed was between the recovery periods during the NoNo and HoHOX interventions (P<0.05, d = 0.93. In the case of HoHo the athletes' Pmean declined from the first to the third interval (P < 0.05, whereas Pmean was unaltered under the HoHOX, NoHOX and NoNo conditions. We conclude that the less pronounced decline in Pmean during 3 x 3-min double-poling sprints in normoxia and hypoxia with hyperoxic recovery is not related to changes in muscle activity or oxygenation. Moreover, we conclude that hyperoxia (FiO2 = 1.00 used in conjunction with hypoxic or normoxic work intervals may serve as an effective aid when inhaled during the subsequent recovery intervals.

  14. 100 years since Scott reached the pole: a century of learning about the physiological demands of Antarctica.

    Science.gov (United States)

    Halsey, Lewis G; Stroud, Mike A

    2012-04-01

    The 1910-1913 Terra Nova Expedition to the Antarctic, led by Captain Robert Falcon Scott, was a venture of science and discovery. It is also a well-known story of heroism and tragedy since his quest to reach the South Pole and conduct research en route, while successful was also fateful. Although Scott and his four companions hauled their sledges to the Pole, they died on their return journey either directly or indirectly from the extreme physiological stresses they experienced. One hundred years on, our understanding of such stresses caused by Antarctic extremes and how the body reacts to severe exercise, malnutrition, hypothermia, high altitude, and sleep deprivation has greatly advanced. On the centenary of Scott's expedition to the bottom of the Earth, there is still controversy surrounding whether the deaths of those five men could have, or should have, been avoided. This paper reviews present-day knowledge related to the physiology of sustained man-hauling in Antarctica and contrasts this with the comparative ignorance about these issues around the turn of the 20th century. It closes by considering whether, with modern understanding about the effects of such a scenario on the human condition, Scott could have prepared and managed his team differently and so survived the epic 1,600-mile journey. The conclusion is that by carrying rations with a different composition of macromolecules, enabling greater calorific intake at similar overall weight, Scott might have secured the lives of some of the party, and it is also possible that enhanced levels of vitamin C in his rations, albeit difficult to achieve in 1911, could have significantly improved their survival chances. Nevertheless, even with today's knowledge, a repeat attempt at his expedition would by no means be bound to succeed.

  15. Effects of upper-body sprint-interval training on strength and endurance capacities in female cross-country skiers

    Science.gov (United States)

    Vandbakk, Kristine; Welde, Boye; Kruken, Andrea Hovstein; Baumgart, Julia; Ettema, Gertjan; Karlsen, Trine; Sandbakk, Øyvind

    2017-01-01

    This study compared the effects of adding upper-body sprint-intervals or continuous double poling endurance training to the normal training on maximal upper-body strength and endurance capacity in female cross-country skiers. In total, 17 female skiers (age: 18.1±0.8yr, body mass: 60±7 kg, maximal oxygen uptake (VO2max): 3.30±0.37 L.min-1) performed an 8-week training intervention. Here, either two weekly sessions of six to eight 30-s maximal upper-body double poling sprint-intervals (SIG, n = 8) or 45–75 min of continuous low-to-moderate intensity double poling on roller skis (CG, n = 9) were added to their training. Before and after the intervention, the participants were tested for physiological and kinematical responses during submaximal and maximal diagonal and double poling treadmill roller skiing. Additionally, we measured maximal upper-body strength (1RM) and average power at 40% 1RM in a poling-specific strength exercise. SIG improved absolute VO2max in diagonal skiing more than CG (8% vs 2%, pinterval training is more effective than continuous endurance training in improving upper-body maximal strength and VO2max. PMID:28241030

  16. Investigation of a less rare-earth permanent-magnet machine with the consequent pole rotor

    Science.gov (United States)

    Bai, Jingang; Liu, Jiaqi; Wang, Mingqiao; Zheng, Ping; Liu, Yong; Gao, Haibo; Xiao, Lijun

    2018-05-01

    Due to the rising price of rare-earth materials, permanent-magnet (PM) machines in different applications have a trend of reducing the use of rare-earth materials. Since iron-core poles replace half of PM poles in the consequent pole (CP) rotor, the PM machine with CP rotor can be a promising candidate for less rare-earth PM machine. Additionally, the investigation of CP rotor in special electrical machines, like hybrid excitation permanent-magnet PM machine, bearingless motor, etc., has verified the application feasibility of CP rotor. Therefore, this paper focuses on design and performance of PM machines when traditional PM machine uses the CP rotor. In the CP rotor, all the PMs are of the same polarity and they are inserted into the rotor core. Since the fundamental PM flux density depends on the ratio of PM pole to iron-core pole, the combination rule between them is investigated by analytical and finite-element methods. On this basis, to comprehensively analyze and evaluate PM machine with CP rotor, four typical schemes, i.e., integer-slot machines with CP rotor and surface-mounted PM (SPM) rotor, fractional-slot machines with CP rotor and SPM rotor, are designed to investigate the performance of PM machine with CP rotor, including electromagnetic performance, anti-demagnetization capacity and cost.

  17. The effects of poling on physiological, kinematic and kinetic responses in roller ski skating.

    Science.gov (United States)

    Grasaas, Erik; Hegge, Ann Magdalen; Ettema, Gertjan; Sandbakk, Øyvind

    2014-09-01

    We investigated the effects of poling on physiological, kinematic and kinetic responses in the G4 skating technique where the poling movement is synchronized with the leg push-off on one side (strong side) followed by a forward arm swing during the leg push-off on the other side (weak side). G4 skating with (G4-P) and without (G4-NP) poling was compared in 17 elite male cross-country skiers during 4-min submaximal tests on a 2% inclined roller ski treadmill at 10, 15 and 20 km h(-1). G4-P demonstrated less ventilatory stress and higher gross efficiency compared to G4-NP at all velocities, and the blood lactate concentration was lower at the high velocity (all P ski forces, increased ski velocities and less angling and edging of the skis (all P ski forces on the strong side were lower than on the weak side with G4-P at all velocities (all P ski forces at a given work rate with G4-P demonstrate the effectiveness of poling in the G4 skating technique. Thus, poling provides possibilities to increase total propulsion, to reduce ski forces and to enhance skiing efficiency.

  18. zic-1 Expression in Planarian neoblasts after injury controls anterior pole regeneration.

    Directory of Open Access Journals (Sweden)

    Constanza Vásquez-Doorman

    2014-07-01

    Full Text Available Mechanisms that enable injury responses to prompt regenerative outgrowth are not well understood. Planarians can regenerate essentially any tissue removed by wounding, even after decapitation, due to robust regulation of adult pluripotent stem cells of the neoblast population. Formation of pole signaling centers involving Wnt inhibitors or Wnt ligands promotes head or tail regeneration, respectively, and this process requires the use of neoblasts early after injury. We used expression profiling of purified neoblasts to identify factors needed for anterior pole formation. Using this approach, we identified zic-1, a Zic-family transcription factor, as transcriptionally activated in a subpopulation of neoblasts near wound sites early in head regeneration. As head regeneration proceeds, the Wnt inhibitor notum becomes expressed in the newly forming anterior pole in zic-1-expressing cells descended from neoblasts. Inhibition of zic-1 by RNAi resulted in a failure to express notum at the anterior pole and to regenerate a head, but did not affect tail regeneration. Both injury and canonical Wnt signaling inhibition are required for zic-1 expression, and double-RNAi experiments suggest zic-1 inhibits Wnt signaling to allow head regeneration. Analysis of neoblast fate determinants revealed that zic-1 controls specification of notum-expressing cells from foxD-expressing neoblasts to form the anterior pole, which organizes subsequent outgrowth. Specialized differentiation programs may in general underlie injury-dependent formation of tissue organizing centers used for regenerative outgrowth.

  19. Reanalysis of Clementine Bistatic Radar Data from the Lunar South Pole

    Science.gov (United States)

    Simpson, Richard A.; Tyler, G. Leonard

    1998-01-01

    On 9 April 1994 the Clementine spacecraft high-gain antenna was aimed toward the Moon's surface and the resulting 13-cm wavelength radio echoes were received on Earth. Using these data, we have found that the lunar surface generally follows a Lambertian bistatic scattering function sigma(sub 0) = K(sub D)cos(theta(sub i) with K(sub D) approx. 0.003 for the opposite (expected) sense of circular polarization and K(sub D) approx. 0.001 for the same (unexpected) sense. But there are important deviations-of up to 50% in some parts of the echo spectrum-from this simple form. Based on an earlier analysis of these same data, Nozette et al. claimed detection of an enhancement in echoes with right circular polarization from regions near the South Pole in a near-backscatter geometry. Such behavior would be consistent with presence of perhaps large quantities of water ice near the Pole. We have been unable to reproduce that result. Although we find weak suggestions of enhanced echoes at the time of South Pole backscatter, similar features are present at earlier and later times, adjacent frequencies, and in left circular polarization. If enhanced backscatter is present, it is not unique to the South Pole; if not unique to the Pole, then ice is less likely as an explanation for the enhancement.

  20. Novel Treatment of a Scapholunate Ligament Injury with Proximal Pole Scaphoid Nonunion

    Science.gov (United States)

    Gaspar, Michael P.; Kane, Patrick M.; Jacoby, Sidney M.; Culp, Randall W.

    2016-01-01

    Background  Nonunion of scaphoid proximal pole fractures presents a challenging management dilemma to hand surgeons. This problem is further complicated in the uncommon concurrence of scapholunate (SL) ligament disruption. Case Description  A 39-year-old male patient presented with new-onset wrist pain following a remote history of a proximal pole scaphoid fracture sustained as a teenager, which was treated nonoperatively. Six months before presentation, the patient sustained a fall while snowboarding. The patient was found to have a chronic nonunion of his scaphoid proximal pole with an associated SL ligament disruption. As the proximal fragment was too small to be amenable to fixation, the patient was treated with an arthroscopic partial scaphoid excision and SL ligament reconstruction using a scapholunateintercarpal screw placed percutaneously. At 26 months, the patient exhibited no pain, near-normal strength, and wrist motion, and expressed a high-level of satisfaction from his surgery. Literature Review  Although cases of SL ligament disruption with concomitant proximal scaphoid fractures have been reported, to our knowledge, this is the first report of SL ligament rupture occurring in the setting of a preexisting proximal pole scaphoid nonunion. Clinical Relevance  We report the use of SL ligament reconstruction augmented with intercarpal screw fixation, and excision of the proximal pole scaphoid nonunion. This minimallyinvasive approach may be a particularly useful option in young, active patients such as our own, where a motion-sacrificing salvage procedure would be less than ideal. PMID:27616829

  1. Laminated wood as an alternative to wood poles : Engineered wood structures for electric utility and telecommunications industries

    Energy Technology Data Exchange (ETDEWEB)

    Reisdorff, R. [Laminated Wood Systems Inc., Seward, NE (United States)

    2002-07-01

    In this PowerPoint presentation, the author discusses the major advantages of laminated structures, for both the electric and telecommunication industries. The advantages include economy, quick delivery, climbing and field modifications, dimensional uniformity and stability. A series of pictures was displayed which showed the manufacturing process. Laminated structures have a proven history. They were developed in Europe in 1890, and introduced to the United States in 1934. Framing members were introduced in the late 1940s, while poles were introduced in 1963, two years ahead of steel poles. Some of the electrical utility applications include: (1) distribution structures, (2) transmission structures such as single-pole, phase over phase switch structures, tangent structures, and H-Frame construction. The applications for the telecommunication industry consist of joint use structures, such as electric and telecommunication, lighting and telecommunication, overhead telephone and wireless; mono-pole applications; three-pole Bell Towers; and tree poles. Examples of each type were shown. figs.

  2. Synthetic focused array of electrical prospecting using pole-pole array potential data; Sanjigen denki tansaho ni okeru nikyokuho den`i data wo mochiita denryu shusoku haichi no goseiho

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-10-22

    Various methods have been put into practice for the conventional two-dimensional pole configuration using a single line in three-dimensional electrical prospecting. Pole configuration effective for the three-dimensional exploration has not been investigated. This paper describes synthetic focused array using four pairs of guarded poles based on pole-pole array potential data in the case of arrangement of measuring points on a grid. Results of the numerical simulation are also described. For the focused array, laterolog of electrical logging is applied to the surface prospecting. Directivity can be given to the current from the main pole by controlling the current from guarded pole. It was found from the simulation that the resistivity anomaly is concentrated directly on the embedded ball for the focused array rather than for the pole-pole array. It was also found that two conductive balls can be clearly separated for the focused array rather than for the dipole-dipole array. Accordingly, it was considered that results approximating the original structures can be obtained by analyzing using the both arrays. 5 refs., 6 figs.

  3. Body Image

    Science.gov (United States)

    ... affect body image Pre-baby body Pregnancy and eating disorders Looking for information on mental health conditions? Visit ... Mental health section. Fact sheets Anorexia nervosa Binge eating disorder Bulimia nervosa Cosmetics and your health Depression during ...

  4. Estéticas juvenis: intervenções nos corpos e na metrópole

    Directory of Open Access Journals (Sweden)

    Rita Oliveira

    2008-09-01

    Full Text Available As culturas juvenis contemporâneas têm relação especial tanto com a cidade quanto com seus corpos. Esse trabalho propõe, com base em imagens metropolitanas articuladas ao cotidiano dos jovens – grafites, pixações, tatuagens e outras modificações corporais –, compor uma reflexão sobre as culturas juvenis inseridas em complexas redes de pertencimentos, produções e apropriações simbólicas, disputas e lutas hegemônicas. Parte-se do âmbito da cultura, ou seja, das práticas cotidianas e das experiências compartilhadas, da sensibilidade estética, das imagens, imaginários comuns aos grupos juvenis. Palavras-chave: Juventude; metrópole; corpo; grafite; tatuagem. ABSTRACT Contemporaneous juvenile cultures have a special relation with the city as well as with the youths‚ bodies. This piece of work focuses on metropolitan images articulated to the every day lives of young people – graffiti, tattoos or other corporal modifications – in order to discuss about the juvenile cultures inserted in complex networks of belonging, of productions and of symbolic appropriations, disputes and hegemonic conflicts. This discussion starts from the cultural point of view, in other words, from the quotidian practices and from shared experiences, from esthetic sensibility, images, imaginaries that are common to juvenile groups. Keywords: Youth; metropolis; body; graffiti, tattoo.

  5. Comparison of 2D and 3D magnetic field analysis of single-phase shaded pole induction motors

    Directory of Open Access Journals (Sweden)

    Adem Dalcali

    2016-03-01

    Full Text Available There has always been doubt on the accuracy of 2D analysis of small electric machines. To investigate the validity of this doubt, in this present work a small uni-coil shaded-pole induction motor is analyzed in 2D and 3D and the results are compared. In order to maintain the paper size as compact, the analysis is limited to the air-gap flux density distribution, variation of the main winding inductance against current and the force acting on the rotor body; which are the important components of the motor performance. It is found that although 3D analysis consumes several times more computing time and storage space, improvement achieved in performance by use of 3D analysis is not very significant. % rms difference between the two cases is obtained as 0.76% for the main winding inductance and 0.59% for the force acting on the rotor body. Also the air-gap flux density distribution obtained from the two types of analysis is found to be very close to each other. Therefore it is concluded that despite more computing time, more storage requirements and more human effort in the case of 3D analysis, the degree of improvement is not proportionally rewarding, and hence, 2D analysis is sufficient for the analysis of small machines.

  6. Dispersion relation and unphysical poles of Möbius domain-wall fermions in free field theory at finite Ls

    Science.gov (United States)

    Tomii, Masaaki

    2018-03-01

    We investigate the dispersion relation of Möbius domain-wall fermions in free field theory at finite Ls. We find that there are Ls - 1 extra poles of Möbius domain-wall fermions in addition to the pole which realizes the physical mode in the continuum limit. The unphysical contribution of these extra poles could be significant when we introduce heavy quarks. We show in this report the fundamental properties of these unphysical poles and discuss the optimal choice of Möbius parameters to minimize their contribution to four-dimensional physics.

  7. Instrument for analysis of electric motors based on slip-poles component

    Science.gov (United States)

    Haynes, H.D.; Ayers, C.W.; Casada, D.A.

    1996-11-26

    A new instrument is described for monitoring the condition and speed of an operating electric motor from a remote location. The slip-poles component is derived from a motor current signal. The magnitude of the slip-poles component provides the basis for a motor condition monitor, while the frequency of the slip-poles component provides the basis for a motor speed monitor. The result is a simple-to-understand motor health monitor in an easy-to-use package. Straightforward indications of motor speed, motor running current, motor condition (e.g., rotor bar condition) and synthesized motor sound (audible indication of motor condition) are provided. With the device, a relatively untrained worker can diagnose electric motors in the field without requiring the presence of a trained engineer or technician. 4 figs.

  8. Improvement of the piezoelectric properties of glass fiber-reinforced epoxy composites by poling treatment

    International Nuclear Information System (INIS)

    Oh, S M; Hwang, H Y

    2013-01-01

    Recently, a new non-destructive method has been proposed for damage monitoring of glass fiber-reinforced polymer composite materials using the piezoelectric characteristics of a polymeric matrix. Several studies of the piezoelectric properties of unidirectional glass fiber epoxy composites and damage monitoring of double-cantilever beams have supported the claim that the piezoelectric method is feasible and powerful enough to monitor the damage of glass fiber epoxy composites. Generally, conventional piezoelectric materials have higher piezoelectric characteristics through poling treatment. In this work, we investigated the change of the piezoelectric properties of glass fiber-reinforced epoxy composites before and after poling treatment. The piezoelectric constants (d 33 ) of glass fiber-reinforced epoxy composites increased by more than 400%. Also, x-ray diffraction tests revealed that poling treatment changed the degree of crystallinity of the epoxy matrix, and this led to the improvement of the piezoelectric characteristics of glass fiber-reinforced epoxy composites. (paper)

  9. A Principle and Winding Design of Consequent-Pole Bearingless Motors

    Science.gov (United States)

    Takenaga, Tomohiro; Kubota, Yutaka; Chiba, Akira; Fukao, Tadashi

    Recently, bearingless motors have been developed to enhance motor drive systems with magnetic suspension. Several types of motors have been proposed as bearingless motors, such as induction, surface mounted permanent magnet, inset permanent magnet, interior permanent magnet, buried permanent magnet, homopolar, hybrid, and switched reluctance bearingless motors. Permanent magnet bearingless motors have been attracting more interests in these years because of the high efficiency. In this paper, a consequent-pole bearingless motor is proposed. A rotor has buried permanent magnets, of which polarities are like. The radial force of a consequent-pole bearingless motor is generated by dc current. Thus, rotational angular position is not needed in a magnetic suspension controller. Radial force variations caused by a rotor rotation are minimized by improving arrangement of stator suspension conductors. A prototype bearingless motor and its controller are built. In experiment, principles of magnetic suspension in the proposed consequent-pole bearingless drive are confirmed.

  10. WDR62 is associated with the spindle pole and is mutated in human microcephaly.

    Science.gov (United States)

    Nicholas, Adeline K; Khurshid, Maryam; Désir, Julie; Carvalho, Ofélia P; Cox, James J; Thornton, Gemma; Kausar, Rizwana; Ansar, Muhammad; Ahmad, Wasim; Verloes, Alain; Passemard, Sandrine; Misson, Jean-Paul; Lindsay, Susan; Gergely, Fanni; Dobyns, William B; Roberts, Emma; Abramowicz, Marc; Woods, C Geoffrey

    2010-11-01

    Autosomal recessive primary microcephaly (MCPH) is a disorder of neurodevelopment resulting in a small brain. We identified WDR62 as the second most common cause of MCPH after finding homozygous missense and frame-shifting mutations in seven MCPH families. In human cell lines, we found that WDR62 is a spindle pole protein, as are ASPM and STIL, the MCPH7 and MCHP7 proteins. Mutant WDR62 proteins failed to localize to the mitotic spindle pole. In human and mouse embryonic brain, we found that WDR62 expression was restricted to neural precursors undergoing mitosis. These data lend support to the hypothesis that the exquisite control of the cleavage furrow orientation in mammalian neural precursor cell mitosis, controlled in great part by the centrosomes and spindle poles, is critical both in causing MCPH when perturbed and, when modulated, generating the evolutionarily enlarged human brain.

  11. Comparative analysis of morphogeometric parameters of forward cranial pole depending on type of a skull basis

    Directory of Open Access Journals (Sweden)

    Aleshkina О.Yu.

    2012-03-01

    Full Text Available The purpose of the work is comparison of parameters of a forward cranial pole depending on type of a skull basis. The research material contained 100 adult skulls divided into three craniotypes. The method of craniotopometry was used for measuring the parameters and further calculation of average value and their comparison among themselves. Results. The research helped to reveal that length of a forward cranial pole, length of a lateral part on the right and at the left, a corner f.c.-s-n prevail at flexibasilar craniotype. Conclusions. The width of a forward cranial pole, width of a lateral part on the right and at the left, a corner f.c.-n-g are more at platibasilar craniotype

  12. Efficiency and economic benefits of skipjack pole and line (huhate) in central Moluccas, Indonesia

    Science.gov (United States)

    Siahainenia, Stevanus M.; Hiariey, Johanis; Baskoro, Mulyono S.; Waeleruny, Wellem

    2017-10-01

    Excess fishing capacity is a crucial problem in marine capture fisheries. This phenomenon needed to be investigated regarding sustainability and development of the fishery. This research was aimed at analyzing technical efficiency (TE) and computing financial aspects of the skipjack pole and line. Primary data were collected from the owners of the fishing units at the different size of gross boat tonnage (GT), while secondary data were gathered from official publications relating to this research. Data envelopment analysis (DEA) approach was applied to estimate technical efficiency whereas a selected financial analysis was utilized to calculate economic benefits of the skipjack pole and line business. The fishing units with a size of 26-30 GT provided a higher TE value, and also achieved larger economic benefit values than that of the other fishing units. The empirical results indicate that skipjack pole and line in the size of 26-30 GT is a good fishing gear for the business development in central Moluccas.

  13. Crystalline texture study of Zr-2.5%Nb pressure pipes by DRX pole figures

    International Nuclear Information System (INIS)

    Buioli, C P; Banchik, A D; Vizcaino, P; Samper, R; Testone, S

    2012-01-01

    This work presents the study of crystalline texture of Zr-2.5%Nb pressure tubes (A, B and C); structural components of CANDU nuclear power reactors [1]. The study of texture was made using the RX diffraction technique, making measurements of direct pole figures [2], in a Phillips diffractometer with pole goniometer (IFIR-CONICET). The texture was determined calculating the coefficients of JJ Kearns [3]. The samples used correspond to transversal sections of the tubes, front and back, and were characterized making de measurements of five pole figures with Miller index (001), (100), (101), (102) and (110), in order to represent in a complete way the texture in the material. The calculated Kearns coefficients were compared with the specifications given by the designer of pressure tubes AECL [4] (author)

  14. Formation of spindle poles by dynein/dynactin-dependent transport of NuMA.

    Science.gov (United States)

    Merdes, A; Heald, R; Samejima, K; Earnshaw, W C; Cleveland, D W

    2000-05-15

    NuMA is a large nuclear protein whose relocation to the spindle poles is required for bipolar mitotic spindle assembly. We show here that this process depends on directed NuMA transport toward microtubule minus ends powered by cytoplasmic dynein and its activator dynactin. Upon nuclear envelope breakdown, large cytoplasmic aggregates of green fluorescent protein (GFP)-tagged NuMA stream poleward along spindle fibers in association with the actin-related protein 1 (Arp1) protein of the dynactin complex and cytoplasmic dynein. Immunoprecipitations and gel filtration demonstrate the assembly of a reversible, mitosis-specific complex of NuMA with dynein and dynactin. NuMA transport is required for spindle pole assembly and maintenance, since disruption of the dynactin complex (by increasing the amount of the dynamitin subunit) or dynein function (with an antibody) strongly inhibits NuMA translocation and accumulation and disrupts spindle pole assembly.

  15. Determination of the dominant resonance pole of the three-neutron system

    International Nuclear Information System (INIS)

    Moeller, K.

    1981-03-01

    The resonance behaviour of a system of three neutrons interacting via s-wave separable Yamaguchi potential is considered. For the quantum numbers (T,S,Lsup(π)) = (3/2, 1/2, 1 - ) the dominating pole of the S-matrix is determined by applying contour deformation technique to solve the homogeneous Faddeev equation on the nonphysical sheets of the S-matrix. For the positions and the asymptotic normalization constant of the dominating pole pair the values z 3 = (-88.0 +- i 27.9) keV and Csub(p) 2 = -0.05 +- i 0.1 are obtained. Although the pole pair is close to the real axis in the complex energy plane it is not expected to cause an observable experimental effect due to the smallness of the asymptotic normalization constant. (author)

  16. Performance evaluation of a five-phase modular external rotor PM machine with different rotor poles

    Directory of Open Access Journals (Sweden)

    A.S. Abdel-Khalik

    2012-12-01

    Full Text Available The performance of fault-tolerant modular permanent magnet (PM machines depends on the proper selection of the pole and slot numbers which result in negligible coupling between phases. The preferred slot and pole number combinations eliminate the effect of low order harmonics in the stator magneto motive force and thereby the vibration and stray loss are reduced. In this paper, three external rotor machines with identical machine dimensions are designed with different slots per phase per pole (SPP ratios. A simulation study is carried out using finite element analysis to compare the performance of the three machines in terms of machine torque density, ripple torque, core loss, and machine efficiency. A mathematical model based on the conventional phase model approach is also used for the comparative study. The simulation study is extended to depict machine performance under fault conditions.

  17. Five-Phase Modular External Rotor PM Machines with Different Rotor Poles: A Comparative Simulation Study

    Directory of Open Access Journals (Sweden)

    A. S. Abdel-Khalik

    2012-01-01

    Full Text Available The performance of fault-tolerant modular permanent magnet machines depends on the proper selection of the pole and slot numbers which result in negligible coupling between phases. The preferred slot and pole number combinations eliminate the effect of low-order harmonics in the stator magnetomotive force and thereby the vibration and stray loss are reduced. In this paper, three external rotor machines with identical machine dimensions are designed with different slots per phase per pole ratios. A simulation study is carried out using finite element analysis to compare the performance of the three machines in terms of machine torque density, ripple torque, core loss, and machine efficiency. A mathematical model based on the conventional-phase-model approach is also used for the comparative study. The simulation study is extended to depict machine performance under fault conditions.

  18. Electric field poling 2G V/m to improve piezoelectricity of PVDF thin film

    Science.gov (United States)

    Hartono, Ambran; Darwin, Ramli, Satira, Suparno; Djamal, Mitra; Herman

    2016-03-01

    Polyvinylidene fluoride (PVDF) is a polymer with unique characteristics i.e. piezoelectric and ferrroelectric properties. Piezoelectric propertiesof PVDF are determined by the fraction of β-phase structure. Several optimization methods have been developed to improve the piezoelectric properties of PVDF. One of our research efforts is to improve the piezoelectricity of PVDF by electric poling with high electric field 2G V/m. The application of high electric field performed on PVDF films with a thickness of 1 1m. Each sample was made with a deep coating method, with annealing temperature 70°C-110°C. Based on the XRD characterization, we have obtained value of β-fraction of samples after poling are: 56%, 61%, 77%, 81% and 83%, respectively. Therefore, high electric field poling has been able to improve the piezoelectric properties of PVDF films. The PVDF with good piezoelectric properties are potential can did a tes for piezoelectric sensors and actuators devices.

  19. Evaluation of magnetic field distribution of superconducting bulk magnets with the same pole arrangement

    International Nuclear Information System (INIS)

    Yokoyama, K.; Oka, T.; Noto, K.

    2008-01-01

    We study on the construction of superconducting permanent magnets by RE123 bulk materials and the investigation of these industrial applications such as a magnetic separation. The bulk magnets can generate strong magnetic field in comparison with common permanent magnets and iron-cored electromagnets. In order to propagate an industrial application of bulk magnet in the feature, it is necessary to form various shape of magnetic field, as well as its strength is enlarged. In this paper, the strong magnetic field in the radial direction has been constructed by a pair of bulk magnets. Two Gd123 bulk materials are magnetized by the IMRA method and these are arranged face-to-face with the same pole facing each other. When the radial component of magnetic fields, B x , is measured in the open space between the magnetic poles with a gap of 50 mm, the area of |B x | > 0.5 T increases to 148% compared with the single pole

  20. Novel pole-sitter mission concepts for continuous polar remote sensing

    Science.gov (United States)

    Ceriotti, Matteo; Heiligers, Jeannette; McInnes, Colin R.

    2012-09-01

    The pole-sitter concept is a solution to the poor temporal resolution of polar observations from highly inclined, low Earth orbits and the poor high latitude coverage from geostationary orbit. It considers a spacecraft that is continuously above either the North or South Pole and, as such, can provide real-time, continuous and hemispheric coverage of the polar regions. Despite the significant distance from the Earth, the utility of this platform for Earth observation and telecommunications is clear, and applications include polar weather forecasting and atmospheric science, glaciology and ice pack monitoring, ultraviolet imaging for aurora studies, continuous telecommunication links with polar regions, arctic ship routing and support for future high latitude oil and gas exploration. The paper presents a full mission design, including launch (Ariane 5 and Soyuz vehicles), for two propulsion options (a near-term solar electric propulsion (SEP) system and a more advanced combination of a solar sail with an SEP system). An optional transfer from the North Pole to South Pole and vice-versa allows viewing of both poles in summer. The paper furthermore focuses on payloads that could be used in such a mission concept. In particular, by using instruments designed for past deep space missions (DSCOVR), it is estimated that resolutions up to about 20 km/pixel in the visible wavelengths can be obtained. The mass of these instruments is well within the capabilities of the pole-sitter design, allowing an SEP-only mission lifetime of about 4 years, while the SEP/sail propulsion technology enables missions of up to 7 years.

  1. Nordic walking versus walking without poles for rehabilitation with cardiovascular disease: Randomized controlled trial.

    Science.gov (United States)

    Girold, Sébastien; Rousseau, Jérome; Le Gal, Magalie; Coudeyre, Emmanuel; Le Henaff, Jacqueline

    2017-07-01

    With Nordic walking, or walking with poles, one can travel a greater distance and at a higher rate than with walking without poles, but whether the activity is beneficial for patients with cardiovascular disease is unknown. This randomized controlled trial was undertaken to determine whether Nordic walking was more effective than walking without poles on walk distance to support rehabilitation training for patients with acute coronary syndrome (ACS) and peripheral arterial occlusive disease (PAOD). Patients were recruited in a private specialized rehabilitation centre for cardiovascular diseases. The entire protocol, including patient recruitment, took place over 2 months, from September to October 2013. We divided patients into 2 groups: Nordic Walking Group (NWG, n=21) and Walking Group without poles (WG, n=21). All patients followed the same program over 4 weeks, except for the walk performed with or without poles. The main outcome was walk distance on the 6-min walk test. Secondary outcomes were maximum heart rate during exercise and walk distance and power output on a treadmill stress test. We included 42 patients (35 men; mean age 57.2±11 years and BMI 26.5±4.5kg/m 2 ). At the end of the training period, both groups showed improved walk distance on the 6-min walk test and treatment stress test as well as power on the treadmill stress test (Ptraining period, Nordic walking training appeared more efficient than training without poles for increasing walk distance on the 6-min walk test for patients with ACS and PAOD. Copyright © 2017. Published by Elsevier Masson SAS.

  2. PolyPole-1: An accurate numerical algorithm for intra-granular fission gas release

    Energy Technology Data Exchange (ETDEWEB)

    Pizzocri, D.; Rabiti, C.; Luzzi, L.; Barani, T.; Van Uffelen, P.; Pastore, G.

    2016-09-01

    This paper describes the development of a new numerical algorithm (called PolyPole-1) to efficiently solve the equation for intra-granular fission gas release in nuclear fuel. The work was carried out in collaboration with Politecnico di Milano and Institute for Transuranium Elements. The PolyPole-1 algorithms is being implemented in INL's fuels code BISON code as part of BISON's fission gas release model. The transport of fission gas from within the fuel grains to the grain boundaries (intra-granular fission gas release) is a fundamental controlling mechanism of fission gas release and gaseous swelling in nuclear fuel. Hence, accurate numerical solution of the corresponding mathematical problem needs to be included in fission gas behaviour models used in fuel performance codes. Under the assumption of equilibrium between trapping and resolution, the process can be described mathematically by a single diffusion equation for the gas atom concentration in a grain. In this work, we propose a new numerical algorithm (PolyPole-1) to efficiently solve the fission gas diffusion equation in time-varying conditions. The PolyPole-1 algorithm is based on the analytic modal solution of the diffusion equation for constant conditions, with the addition of polynomial corrective terms that embody the information on the deviation from constant conditions. The new algorithm is verified by comparing the results to a finite difference solution over a large number of randomly generated operation histories. Furthermore, comparison to state-of-the-art algorithms used in fuel performance codes demonstrates that the accuracy of the PolyPole-1 solution is superior to other algorithms, with similar computational effort. Finally, the concept of PolyPole-1 may be extended to the solution of the general problem of intra-granular fission gas diffusion during non-equilibrium trapping and resolution, which will be the subject of future work.

  3. An improved torque density Modulated Pole Machine for low speed high torque applications

    DEFF Research Database (Denmark)

    Washington, J. G.; Atkinson, G. J.; Baker, N. J.

    2012-01-01

    This paper presents a new topology for three-phase Modulated Pole Machines. This new topology the “Combined Phase Modulated Pole Machine” is analysed and compared to the more traditional technology of three separate single phase units stacked axially with a separation between phases. Three......- dimensional Finite Element calculations are used to compare performance of the machines under the same conditions, it is shown that the new Combined Phase topology produces a greater torque whilst reducing the number of components required to assemble the machine and increasing its mechanical integrity....

  4. Interference effect of edge radiation at three-pole wiggler section

    International Nuclear Information System (INIS)

    Koda, Shigeru; Takabayashi, Yuichi

    2016-01-01

    Radiation from a three-pole wiggler section is not simply treated as typical synchrotron radiation in a long-wavelength region. The interference effect between edge radiations from upstream and downstream straight subsections of the wiggler is considered to contribute significantly to the radiation. Our simple model roughly reproduced spectral and spatial distributions of the radiation. Under the maximum interference condition, the peak radiation intensity is four times larger than the edge radiation from a single straight section. Moreover, the longitudinal periodic alignment of three-pole wigglers, which satisfies the maximum interference condition, generates radiation of higher intensity proportional to the square of the periodic number. (author)

  5. WDR62 is associated with the spindle pole and is mutated in human microcephaly

    OpenAIRE

    Nicholas, Adeline K; Khurshid, Maryam; Désir, Julie; Carvalho, Ofélia P; Cox, James J; Thornton, Gemma; Kausar, Rizwana; Ansar, Muhammad; Ahmad, Wasim; Verloes, Alain; Passemard, Sandrine; Misson, Jean-Paul; Lindsay, Susan; Gergely, Fanni; Dobyns, William B

    2010-01-01

    Autosomal recessive primary microcephaly (MCPH) is a disorder of neurodevelopment resulting in a small brain1,2. We identified WDR62 as the second most common cause of MCPH after finding homozygous missense and frame-shifting mutations in seven MCPH families. In human cell lines, we found that WDR62 is a spindle pole protein, as are ASPM and STIL, the MCPH7 and MCHP7 proteins3–5. Mutant WDR62 proteins failed to localize to the mitotic spindle pole. In human and mouse embryonic brain, we found...

  6. Transcendental and interpolation methods in simultaneous stabilization and simultaneous partial pole placement problems

    Science.gov (United States)

    Ghosh, B. K.

    1986-01-01

    The existence of a compensator which simultaneously renders a given r-tuple of multiinput-multioutput p x m linear dynamical systems internally stable is investigated. In particular, a set of simultaneously stabilizable r-tuples of plants is parametrized, and it is shown that, provided r = max(m,p) or less, the above set is semialgebraic and dense in the space Sigma of r-tuples of plants. An extension of the classical pole placement and stabilization problems is considered, and the simultaneous partial pole placement problem is investigated.

  7. Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

    International Nuclear Information System (INIS)

    Huang, Zhen; Ruiz, H.S.; Coombs, T.A.

    2017-01-01

    Highlights: • Different compositions of the magnetic poles have been obtained depending on the relative orientation of the magnetizing coil and the surfaces of the columns of bulks that conform a magnetic pole. • Two bidimensional models accounting for the electromagnetic response of the top and lateral cross sections of three columns of HTS bulks subjected to multiple pulsed magnetic fields have been created. • An extended PFM strategy has been proposed by considering the magnetization of at least three successive columns of HTS bulks per pole. In the extended PFM strategy the area of each one of the poles can be seen increased by a factor of 200%-400% - Abstract: High temperature superconducting (HTS) bulks offer the potential of trapping and maintaining much higher magnetic loading level compared with the conventional permanent magnets used in rotary machines, although the effective magnetization of multiple HTS bulks with different relative orientations over the surface of cylindrical rotors creates new challenges. In this paper, we present the design and numerical validation of the Pulse Field Magnetization (PFM) strategy considered for the magnetization of the four-pole synchronous fully superconducting motor developed at the University of Cambridge. In a first instance, singular columns of up to five HTS bulks aligned over the height of the rotor were subjected to up to three magnetic pulses of 1.5 T peak, and the experimental results have been simulated by considering the electrical and thermal properties of the system in a 2D approach. The entire active surface of the rotor is covered by HTS bulks of approximately the same dimensions, resulting in an uneven distribution of pole areas with at least one of the poles formed by up to 3 columns of magnetized bulks, with relatively the same peaks of trapped magnetic field. Thus, in order to effectively use the entire area of the superconducting rotor, multiple pulsed fields per column have been applied

  8. Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhen, E-mail: zhen.huang@sjtu.edu.cn [Academy of Information Technology and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Ruiz, H.S., E-mail: dr.harold.ruiz@le.ac.uk [Department of Engineering, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom); Coombs, T.A., E-mail: tac1000@cam.ac.uk [Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge CB3 0FA (United Kingdom)

    2017-03-15

    Highlights: • Different compositions of the magnetic poles have been obtained depending on the relative orientation of the magnetizing coil and the surfaces of the columns of bulks that conform a magnetic pole. • Two bidimensional models accounting for the electromagnetic response of the top and lateral cross sections of three columns of HTS bulks subjected to multiple pulsed magnetic fields have been created. • An extended PFM strategy has been proposed by considering the magnetization of at least three successive columns of HTS bulks per pole. In the extended PFM strategy the area of each one of the poles can be seen increased by a factor of 200%-400% - Abstract: High temperature superconducting (HTS) bulks offer the potential of trapping and maintaining much higher magnetic loading level compared with the conventional permanent magnets used in rotary machines, although the effective magnetization of multiple HTS bulks with different relative orientations over the surface of cylindrical rotors creates new challenges. In this paper, we present the design and numerical validation of the Pulse Field Magnetization (PFM) strategy considered for the magnetization of the four-pole synchronous fully superconducting motor developed at the University of Cambridge. In a first instance, singular columns of up to five HTS bulks aligned over the height of the rotor were subjected to up to three magnetic pulses of 1.5 T peak, and the experimental results have been simulated by considering the electrical and thermal properties of the system in a 2D approach. The entire active surface of the rotor is covered by HTS bulks of approximately the same dimensions, resulting in an uneven distribution of pole areas with at least one of the poles formed by up to 3 columns of magnetized bulks, with relatively the same peaks of trapped magnetic field. Thus, in order to effectively use the entire area of the superconducting rotor, multiple pulsed fields per column have been applied

  9. The south pole region of the moon as seen by Clementine

    Science.gov (United States)

    Shoemaker, E.M.; Robinson, M.S.; Eliason, E.M.

    1994-01-01

    The Clementine mission has provided the first comprehensive set of high-resolution images of the south pole region of the moon. Within 5?? of latitude of the pole, an area of an estimated 30,000 square kilometers remained in shadow during a full lunar rotation and is a promising target for future exploration for ice deposits. The Schrodinger Basin (320 kilometers in diameter), centered at 75??S, is one of the two youngest, least modified, great multiring impact basins on the moon. A large maar-type volcano localized along a graben within the Schrodinger Basin probably erupted between 1 and 2 billion years ago.

  10. A magnetostatic calculation of fringing field for the Rogowski pole boundary with floating snake

    International Nuclear Information System (INIS)

    Yan Chen; Fan Ming-Wu

    1984-01-01

    A boundary integral method has been used to calculate the fringing field distribution of Rogowski pole boundary with floating snake for QMG2 type of QDDD magnetic spectrograph and the experimental EFB is nearly reproduced from BIM calculation. As a further criteria, a calculation for clamped Rogowski pole but without snake is also performed and the calculated EFB shows perfect identity with the experiment. For evaluating the effect of snake quantitatively, this work also predicts the EFB values for two different positions of snake

  11. THEORIES REGARDING THE ROLE OF THE GROWTH POLES IN THE EUROPEAN ECONOMIC INTEGRATION

    Directory of Open Access Journals (Sweden)

    Laurentia Georgeta Avram

    2017-06-01

    Full Text Available The specialized literature stressed very little or not at all the role of the growth poles in the economic integration, although the development of the national economies depend on connecting the major urban centers in the regional economic system, continental and global levels. Conversely, integration and globalization of the economic, socio-political, cultural and the transition to a knowledge economy seem to be major factors in the transformation and restructuring of the growth poles and the urban systems dependent on them.

  12. Kõiges pole süüdi britid / Toomas Hendrik Ilves

    Index Scriptorium Estoniae

    Ilves, Toomas Hendrik, 1953-

    2005-01-01

    Ilmunud ka: Postimees : na russkom jazõke 14. dets. lk. 7. Euroopa Parlamendi väliskomisjoni aseesimees rõhutab, et EL-i eelarvekava keskmes pole mitte uutele liikmesriikidele antav raha, vaid põllumajandustoetuste reformimine, mille peamised kasusaajad on EL-is praegu käputäis suurtootjaid. 1% ehk 2530 prantsuse farmerit saavad 13% ehk 80 miljardit krooni EL-i põllumajandusrahast aastas. Ka Eestis pole põllumajandusministeerium nõus otsetoetuste saajaid avalikustama ning kohalikud teadlased on välja arvutanud, et ka siinsed suhtarvud sarnanevad suuresti Prantsusmaa vastavate arvudega

  13. A ZMP-Compensation Method Based on Pole-Zero Cancellation for Biped Robots

    Science.gov (United States)

    Shimmyo, Shuhei; Ohnishi, Kouhei

    This paper proposes a ZMP-compensation method based on pole-zero cancellation for biped robots. Conventionally, walking stabilization controls is achieved by using the feedback of ZMP error. In these systems, several feedback gains need to be determined, and this is done by using the optimal control theory or the pole-placement method. In the proposed method, only one feedback gain needs to be determined. Therefore, the proposed method makes it easy to design a walking stabilization controller. The effectiveness of the proposed method is confirmed from the results of simulations and experiments.

  14. Raman Probe Based on Optically-Poled Double-Core Fiber

    DEFF Research Database (Denmark)

    Brunetti, Anna Chiara; Margulis, Walter; Rottwitt, Karsten

    2012-01-01

    A Raman probe based on an optically-poled double-core fiber. In-fiber SHG allows for Raman spectroscopy of DMSO at 532nm when illuminating the fiber with 1064nm light. The fiber structure provides independent excitation and collection paths.......A Raman probe based on an optically-poled double-core fiber. In-fiber SHG allows for Raman spectroscopy of DMSO at 532nm when illuminating the fiber with 1064nm light. The fiber structure provides independent excitation and collection paths....

  15. Modeling the starting performance of high power solid rotor salient pole synchronous motors

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, R.; Sadowski, N. [GRUCAD/Federal University of Santa Catarina, Florianopolis, SC 88040-970 (Brazil); Grander, L.O. [ELETROSUL Power Stations S.A., Florianopolis, SC 88040-901 (Brazil); Ruencos, F.; Ogawa, C.; Fo, F.J. Doubrawa [WEG Energy, Jaragua do Sul, SC 89256-900 (Brazil)

    2009-12-15

    A computer model, including analytical and FEM formulations, was developed to calculate the starting performance of synchronous motors with solid rotor salient poles. Using quasi-steady state equations, the average and the envelope of the oscillating electromagnetic torque as well as the stator rms current are calculated. With the stator current, the rotor pole losses are evaluated by FEM. The complete simulation process is performed by self-contained software composed by several computational modules properly tiled to simplify the work of a design engineer. The calculated starting performance was compared to experimental results showing satisfactory consistency. (author)

  16. Force Profiles of a Linear Switched Reluctance Motor Having Special Pole Face Shapes

    Directory of Open Access Journals (Sweden)

    CHADRESEKAR, V.

    2010-11-01

    Full Text Available In this paper, the results of a finite element analysis are carried out on an new stator geometry of a three phase longitudinal flux Linear Switched Reluctance Motor (LSRM. In the new geometry, pole shoes are affixed to the stator poles. Static and dynamic characteristics for the proposed structure have been highlighted. Motor performance for variable load conditions is discussed. Frequency spectrum analyses of force profile using the fast Fourier transform (FFT are described to predict the vibration frequencies. The 2-Dimensional (2-D finite element analysis (FEA and the experimental results of this paper prove that LSRMs are one of the strong candidates for linear propulsion drives.

  17. SIN-inhibitory phosphatase complex promotes Cdc11p dephosphorylation and propagates SIN asymmetry in fission yeast.

    Science.gov (United States)

    Singh, N Sadananda; Shao, Nan; McLean, Janel R; Sevugan, Mayalagu; Ren, Liping; Chew, Ting Gang; Bimbo, Andrea; Sharma, Reetu; Tang, Xie; Gould, Kathleen L; Balasubramanian, Mohan K

    2011-12-06

    Cytokinesis in many eukaryotes involves the function of an actomyosin-based contractile ring. In fission yeast, actomyosin ring maturation and stability require a conserved signaling pathway termed the SIN (septation initiation network). The SIN consists of a GTPase (Spg1p) and three protein kinases, all of which localize to the mitotic spindle pole bodies (SPBs). Two of the SIN kinases, Cdc7p and Sid1p, localize asymmetrically to the newly duplicated SPB in late anaphase. How this asymmetry is achieved is not understood, although it is known that their symmetric localization impairs cytokinesis. Here we characterize a new Forkhead-domain-associated protein, Csc1p, and identify SIN-inhibitory PP2A complex (SIP), which is crucial for the establishment of SIN asymmetry. Csc1p localizes to both SPBs early in mitosis, is lost from the SPB that accumulates Cdc7p, and instead accumulates at the SPB lacking Cdc7p. Csc1p is required for the dephosphorylation of the SIN scaffolding protein Cdc11p and is thereby required for the recruitment of Byr4p, a component of the GTPase-activating subunit for Spg1p, to the SPB. Because Cdc7p does not bind to GDP-Spg1p, we propose that the SIP-mediated Cdc11p dephosphorylation and the resulting recruitment of Byr4p are among the earliest steps in the establishment of SIN asymmetry. Copyright © 2011 Elsevier Ltd. All rights reserved.

  18. SIN-Inhibitory Phosphatase Complex (SIP) Promotes Cdc11p Dephosphorylation and Propagates SIN Asymmetry in Fission Yeast

    Science.gov (United States)

    Singh, N. Sadananda; Shao, Nan; McLean, Janel R.; Sevugan, Mayalagu; Ren, Liping; Chew, Ting Gang; Bimbo, Andrea; Sharma, Reetu; Tang, Xie; Gould, Kathleen L.; Balasubramanian, Mohan K.

    2014-01-01

    Background Cytokinesis in many eukaryotes involves the function of an actomyosin-based contractile ring. In fission yeast, actomyosin ring maturation and stability require a conserved signaling pathway termed the SIN (septation initiation network). The SIN consists of a GTPase (Spg1p) and three protein kinases, all of which localize to the mitotic spindle pole bodies (SPBs). Two of the SIN kinases, Cdc7p and Sid1p, localize asymmetrically to the newly duplicated SPB in late anaphase. How this asymmetry is achieved is not understood, although it is known that their symmetric localization impairs cytokinesis. Results Here we characterize a new Forkhead-domain-associated protein, Csc1p, and identify SIN-Inhibitory PP2A-complex (SIP), which is crucial for the establishment of SIN asymmetry. Csc1p localizes to both SPBs early in mitosis, is lost from the SPB that accumulates Cdc7p, and instead accumulates at the SPB lacking Cdc7p. Csc1p is required for the dephosphorylation of the SIN scaffolding protein Cdc11p and is thereby required for the recruitment of Byr4p, a component of the GTPase-activating subunit for Spg1p, to the SPB. Conclusions Since Cdc7p does not bind to GDP-Spg1p, we propose that the SIP-mediated Cdc11p-dephosphorylation and the resulting recruitment of Byr4p are amongst the earliest steps in the establishment of SIN asymmetry. PMID:22119525

  19. Moonrise: Sampling the South Pole-Aitken Basin to Address Problems of Solar System Significance

    Science.gov (United States)

    Zeigler, R. A.; Jolliff, B. L.; Korotev, R. L.; Shearer, C. K.

    2016-01-01

    A mission to land in the giant South Pole-Aitken (SPA) Basin on the Moon's southern farside and return a sample to Earth for analysis is a high priority for Solar System Science. Such a sample would be used to determine the age of the SPA impact; the chronology of the basin, including the ages of basins and large impacts within SPA, with implications for early Solar System dynamics and the magmatic history of the Moon; the age and composition of volcanic rocks within SPA; the origin of the thorium signature of SPA with implications for the origin of exposed materials and thermal evolution of the Moon; and possibly the magnetization that forms a strong anomaly especially evident in the northern parts of the SPA basin. It is well known from studies of the Apollo regolith that rock fragments found in the regolith form a representative collection of many different rock types delivered to the site by the impact process (Fig. 1). Such samples are well documented to contain a broad suite of materials that reflect both the local major rock formations, as well as some exotic materials from far distant sources. Within the SPA basin, modeling of the impact ejection process indicates that regolith would be dominated by SPA substrate, formed at the time of the SPA basin-forming impact and for the most part moved around by subsequent impacts. Consistent with GRAIL data, the SPA impact likely formed a vast melt body tens of km thick that took perhaps several million years to cool, but that nonetheless represents barely an instant in geologic time that should be readily apparent through integrated geochronologic studies involving multiple chronometers. It is anticipated that a statistically significant number of age determinations would yield not only the age of SPA but also the age of several prominent nearby basins and large craters within SPA. This chronology would provide a contrast to the Imbrium-dominated chronology of the nearside Apollo samples and an independent test of

  20. A variational EM method for pole-zero modeling of speech with mixed block sparse and Gaussian excitation

    DEFF Research Database (Denmark)

    Shi, Liming; Nielsen, Jesper Kjær; Jensen, Jesper Rindom

    2017-01-01

    the posterior PDFs of the block sparse residuals and point estimates of mod- elling parameters within a sparse Bayesian learning framework. Compared to conventional pole-zero and all-pole based methods, experimental results show that the proposed method has lower spectral distortion and good performance...

  1. Analysis of the state of poling of lead zirconate titanate (PZT) particles in a Zn-ionomer composite

    NARCIS (Netherlands)

    James, N.K.; Comyn, T.; Hall, D.; Daniel, L.; Kleppe, A.; Zwaag, S. van der; Groen, W.A.

    2016-01-01

    The poling behaviour of tetragonal lead zirconate titanate (PZT) piezoelectric ceramic particles in a weakly conductive ionomer polymer matrix is investigated using high energy synchrotron X-ray diffraction analysis. The poling efficiency, crystallographic texture and lattice strain of the PZT

  2. Removal of creosote from wood particles at different horizontal and vertical locations of decommissioned poles using steam treatment

    Science.gov (United States)

    Todd F. Shupe; Chung Y. Hse; Han Roliadi

    2006-01-01

    This study used steam treatment to evaluate the potential of this method to remove residual creosote content of sawdust from weathered, out-of-service poles. Steaming was successful in reducing the creosote content to a level of 1.31%, regardless of creosote content at the start of the steaming treatment. Poles with higher initial creosote contents required longer...

  3. Vallandatud juht: sain suurepäraselt hakkama / Igor Poleštšuk

    Index Scriptorium Estoniae

    Poleštšuk, Igor

    2009-01-01

    2008. aasta detsembris Kreenholmi tegevjuhiks valitud ning neli kuud hiljem vallandatud Igor Poleštšuk vastab küsimustele, mis puudutavad Kreenholmi omanike vallandamisotsust ja ärimudelit, vastuolusid omanike ja Rootsis asuva tegevjuhtkonna vahel, Kreenholmis saavutatud tulemusi ning Kreenholmi edasist saatust

  4. effect of number of rotor poles on ac losses of permanent magnet

    African Journals Online (AJOL)

    HOD

    A study on permanent magnet (PM) eddy current and core losses of dual-stator PM machines is investigated in this paper. The analyzed core losses include: the rotor core loss, stator core loss and the total core loss of the machines. Further, the effect of their different rotor pole number is also presented with quantitative ...

  5. From Beale Number to Pole Placement Design of a Free Piston Stirling Engine

    Directory of Open Access Journals (Sweden)

    Zare Shahryar

    2017-12-01

    Full Text Available In this paper, pole placement-based design and analysis of a free piston Stirling engine (FPSE is presented and compared to the well-defined Beale number design technique. First, dynamic and thermodynamic equations governing the engine system are extracted. Then, linear dynamics of the free piston Stirling engine are studied using dynamic systems theory tools such as root locus. Accordingly, the effects of variations of design parameters such as mass of pistons, stiffness of springs, and frictional damping on the locations of dominant closed-loop poles are investigated. The design procedure is thus conducted to place the dominant poles of the dynamic system at desired locations on the s-plane so that the unstable dynamics, which is the required criterion for energy generation, is achieved. Next, the closed-loop poles are selected based on a desired frequency so that a periodical system is found. Consequently, the design parameters, including mass and spring stiffness for both power and displacer pistons, are obtained. Finally, the engine power is calculated through the proposed control-based analysis and the result is compared to those of the experimental work and the Beale number approach. The outcomes of this work clearly reveal the effectiveness of the control-based design technique of FPSEs compared to the well-known approaches such as Beale number.

  6. Lower pole caliceal stone clearance after ESWL: the effect of infundibulopelvic angle.

    Science.gov (United States)

    Lojanapiwat, B; Soonthornpun, S; Wudhikarn, S

    1999-09-01

    Extracorporeal Shock Wave Lithotripsy (ESWL) represents the first choice therapy for renoureteral stone disease. Clinical controversy exists concerning the efficacy of ESWL for lower pole kidney stones. Nowadays, the factors that hinder the spontaneous passage of stone debris that results from ESWL of lower caliceal stone are the gravity-dependent position of the lower pole calices and particular features of the inferior-pole collecting system anatomy. We studied the influence of the lower infundibulo-pelvic in the success of ESWL of lower caliceal stones 10-20 millimeters in size in 50 patients with STORZ MODULITH SL-20 machine. At the mean follow-up of 6 months, only 44 per cent of the patients presenting with an infundibulo-pelvic angle of les than 90 degrees became stone free. On the other hand, 86 per cent of the patients presenting with an infundibulo-pelvic angle of greater than 90 degrees became stone free. Our data suggest that acute infundibulo-pelvic angle of the lower pole hinders the spontaneous passage of fragments after ESWL.

  7. Ring modulator small-signal response analysis based on pole-zero representation.

    Science.gov (United States)

    Karimelahi, Samira; Sheikholeslami, Ali

    2016-04-04

    We present a closed-form expression for the small-signal response of a depletion-mode ring modulator and verify it by measurement results. Both electrical and optical behavior of micro-ring modulator as well as the loss variation due to the index modulation is considered in the derivation. This expression suggests that a ring modulator is a third-order system with one real pole, one zero and a pair of complex-conjugate poles. The exact positions of the poles/zero are given and shown to be dependent upon parameters such as electrical bandwidth, coupling condition, optical loss, and sign/value of laser detunings. We show that the location of zero is different for positive and negative detuning, and therefore, the ring modulator frequency response is asymmetric. We use the gain-bandwidth product as a figure of merit and calculate it for various pole/zero locations. We show that gain-bandwidth for the over-coupled ring modulator is superior compared to other coupling conditions. Also, we show that the gain-bandwidth product can be increased to a limit by increasing the electrical bandwidth.

  8. Prototype crawling robotics system for remote visual inspection of high-mast light poles.

    Science.gov (United States)

    1997-01-01

    This report presents the results of a project to develop a crawling robotics system for the remote visual inspection of high-mast light poles in Virginia. The first priority of this study was to develop a simple robotics application that would reduce...

  9. Lunar Pole Illumination and Communications Maps Computed from GSSR Elevation Data

    Science.gov (United States)

    Bryant, Scott

    2009-01-01

    A Digital Elevation Model of the lunar south pole was produced using Goldstone Solar System RADAR (GSSR) data obtained in 2006.12 This model has 40-meter horizontal resolution and about 5-meter relative vertical accuracy. This Digital Elevation Model was used to compute average solar illumination and Earth visibility with 100 kilometers of the lunar south pole. The elevation data were converted into local terrain horizon masks, then converted into lunar-centric latitude and longitude coordinates. The horizon masks were compared to latitude, longitude regions bounding the maximum Sun and Earth motions relative to the moon. Estimates of Earth visibility were computed by integrating the area of the region bounding the Earth's motion that was below the horizon mask. Solar illumination and other metrics were computed similarly. Proposed lunar south pole base sites were examined in detail, with the best site showing yearly solar power availability of 92 percent and Direct-To-Earth (DTE) communication availability of about 50 percent. Similar analysis of the lunar south pole used an older GSSR Digital Elevation Model with 600-meter horizontal resolution. The paper also explores using a heliostat to reduce the photovoltaic power system mass and complexity.

  10. Scientific Goals of the IceCube Neutrino Detector at the South Pole

    CERN Document Server

    Goldschmidt, A

    2002-01-01

    IceCube is a proposed ice-Cherenkov kilometer scale neutrino telescope, to be located at the South Pole. Its science potential covers a wide range of topics from Active Galatic Nuclei and Gamma Ray Bursters neutrino emission to WIMP annihilation into neutrinos.

  11. Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

    Science.gov (United States)

    Huang, Zhen; Ruiz, H. S.; Coombs, T. A.

    2017-03-01

    High temperature superconducting (HTS) bulks offer the potential of trapping and maintaining much higher magnetic loading level compared with the conventional permanent magnets used in rotary machines, although the effective magnetization of multiple HTS bulks with different relative orientations over the surface of cylindrical rotors creates new challenges. In this paper, we present the design and numerical validation of the Pulse Field Magnetization (PFM) strategy considered for the magnetization of the four-pole synchronous fully superconducting motor developed at the University of Cambridge. In a first instance, singular columns of up to five HTS bulks aligned over the height of the rotor were subjected to up to three magnetic pulses of 1.5 T peak, and the experimental results have been simulated by considering the electrical and thermal properties of the system in a 2D approach. The entire active surface of the rotor is covered by HTS bulks of approximately the same dimensions, resulting in an uneven distribution of pole areas with at least one of the poles formed by up to 3 columns of magnetized bulks, with relatively the same peaks of trapped magnetic field. Thus, in order to effectively use the entire area of the superconducting rotor, multiple pulsed fields per column have been applied under the same experimental conditions, what results in about three times larger magnetic pole areas but with an average drop on the peaks of trapped magnetic field of about 50%.

  12. Continuous Planetary Polar Observation from Hybrid Pole-Sitters at Venus, Earth, and Mars

    NARCIS (Netherlands)

    Heiligers, M.J.; van den Oever (student TUDelft), Tom; Ceriotti, M.; Mulligan, P.; McInnes, CR

    2017-01-01

    A pole-sitter is a satellite that is stationed along the polar axis of the Earth, or any other planet, to generate a continuous, hemispherical view of the planet’s polar regions. In order to maintain such a vantage point, a low-thrust propulsion system is required to counterbalance the gravitational

  13. 3-D finite element analysis of claw-poled stepping motor

    International Nuclear Information System (INIS)

    Kawase, Yoshihiro; Yamaguchi, Tadashi; Mizuno; Koike, Yoshikazu

    2002-01-01

    Stepping motors are widely used for various electric instruments. It is necessary for the optimum design to analyze the magnetic field accurately. The 3-D finite element method with edge elements taking into account the rotation of the rotor has been applied to analyze the magnetic field of a claw-poled stepping motor. (Author)

  14. Experience on impregnation of wood.en poles with water borne salts

    African Journals Online (AJOL)

    I. Leechability. Since the process depends on osmosis, the preservative must be highly soluble in water and ... treating plant where the FU LL CELL method can be employed to be more suitable. In June 1961 the plant was acquired from Sweden and treating of poles commenced using a water borne preservative commonly ...

  15. Phloem unloading in Arabidopsis roots is convective and regulated by the phloem-pole pericycle

    DEFF Research Database (Denmark)

    Ross-Elliott, Timothy J.; Jensen, Kaare Hartvig; Haaning, Katrine S.

    2017-01-01

    by a unique class of 'funnel plasmodesmata'. While solutes are unloaded without restriction, large proteins are released through funnel plasmodesmata in discrete pulses, a phenomenon we refer to as 'batch unloading'. Unlike solutes, these proteins remain restricted to the phloem-pole pericycle. Our data...

  16. Building Peace Poles: Inexpensive Woodworking Project Great for Middle and High School Students

    Science.gov (United States)

    Roccanova, John

    2013-01-01

    The World Peace Prayer Society (WPPS) has at its core the message: "May peace prevail on Earth." This axiom appears on the roughly 200,000 Peace Poles that are planted at private residences, schools, in parks, and at other public places worldwide including at the Pentagon, the Pyramids in Egypt, and on Mt. Kilimanjaro, the highest free-standing…

  17. On the factorization of universal poles in a theory of gravitating point particles.

    NARCIS (Netherlands)

    Hooft, G. 't

    1988-01-01

    A theory is considered in which point-like particles scatter only gravitationally and electromagnetically but no other exchanges are taken into account. The two-particle amplitude at high s, low t, as computed before, has universal poles at s values whose imaginary parts are integer positive numbers

  18. Siim Kallas: Rail Baltica edeneb, aga veel pole mõtet kiirrongi oodata / Urmas Jaagant

    Index Scriptorium Estoniae

    Jaagant, Urmas

    2010-01-01

    Euroopa Komisjoni voliniku Siim Kallase sõnul pole mingit põhjust, miks Eestis ei võiks sõita 200 km/h liikuvad kiirrongid, vajaliku raudtee ehitamine võib olla isegi odavam kui uus maantee. Kuid oluline on küsimus, kuidas tekitada erasektoris piisavalt suur kindlustunne, et Rail Baltica projekt ära tasub

  19. Morpho-functional characterization of the systemic venous pole of the reptile heart

    NARCIS (Netherlands)

    Jensen, Bjarke; Vesterskov, Signe; Boukens, Bastiaan J.; Nielsen, Jan M.; Moorman, Antoon F. M.; Christoffels, Vincent M.; Wang, Tobias

    2017-01-01

    Mammals evolved from reptile-like ancestors, and while the mammalian heart is driven by a distinct sinus node, a sinus node is not apparent in reptiles. We characterized the myocardial systemic venous pole, the sinus venosus, in reptiles to identify the dominant pacemaker and to assess whether the

  20. Kvoodimüügilt teenitud miljardid pole Eestis saastamist vähendanud / Raimo Poom

    Index Scriptorium Estoniae

    Poom, Raimo

    2007-01-01

    Autori väitel pole Eesti Energia süsihappegaasi kasutamata kvoodi müügist teenitud peaaegu 3 miljardist seni CO₂ õhkupaiskamist vähendavatesse projektidesse midagi paigutanud. Eesti Energia finantsdirektori Margus Kaasiku selgitus. Lisa: Eesti tuleks toime väiksema kvoodiga

  1. Effect of the upper limbs muscles activity on the mechanical energy gain in pole vaulting.

    Science.gov (United States)

    Frère, Julien; Göpfert, Beat; Slawinski, Jean; Tourny-chollet, Claire

    2012-04-01

    The shoulder muscles are highly solicited in pole vaulting and may afford energy gain. The objective of this study was to determine the bilateral muscle activity of the upper-limbs to explain the actions performed by the vaulter to bend the pole and store elastic energy. Seven experienced athletes performed 5-10 vaults which were recorded using two video cameras (50Hz). The mechanical energy of the centre of gravity (CG) was computed, while surface electromyographic (EMG) profiles were recorded from 5 muscles bilateral: deltoideus, infraspinatus, biceps brachii, triceps, and latissimus dorsi muscles. The level of intensity from EMG profile was retained in four sub phases between take-off (TO1) and complete pole straightening (PS). The athletes had a mean mechanical energy gain of 22% throughout the pole vault, while the intensities of deltoideus, biceps brachii, and latissimus dorsi muscles were sub phases-dependent (pmuscle activation. The gain in mechanical energy of the vaulter could be linked to an increase in muscle activation, especially from latissimusdorsi muscles. Copyright © 2011 Elsevier Ltd. All rights reserved.

  2. Development of a neurofeedback protocol targeting the frontal pole using near-infrared spectroscopy.

    Science.gov (United States)

    Kinoshita, Akihide; Takizawa, Ryu; Yahata, Noriaki; Homae, Fumitaka; Hashimoto, Ryuichiro; Sakakibara, Eisuke; Kawasaki, Shingo; Nishimura, Yukika; Koike, Shinsuke; Kasai, Kiyoto

    2016-11-01

    Neurofeedback has been studied with the aim of controlling cerebral activity. Near-infrared spectroscopy is a non-invasive neuroimaging technique used for measuring hemoglobin concentration changes in cortical surface areas with high temporal resolution. Thus, near-infrared spectroscopy may be useful for neurofeedback, which requires real-time feedback of repeated brain activation measurements. However, no study has specifically targeted neurofeedback, using near-infrared spectroscopy, in the frontal pole cortex. We developed an original near-infrared spectroscopy neurofeedback system targeting the frontal pole cortex. Over a single day of testing, each healthy participant (n = 24) received either correct or incorrect (Sham) feedback from near-infrared spectroscopy signals, based on a crossover design. Under correct feedback conditions, significant activation was observed in the frontal pole cortex (P = 0.000073). Additionally, self-evaluation of control and metacognitive beliefs were associated with near-infrared spectroscopy signals (P = 0.006). The neurofeedback system developed in this study might be useful for developing control of frontal pole cortex activation. © 2016 The Authors. Psychiatry and Clinical Neurosciences © 2016 Japanese Society of Psychiatry and Neurology.

  3. Kaitseväelastel pole alust kogu missiooni eest lisapalka nõuda / Holger Roonemaa

    Index Scriptorium Estoniae

    Roonemaa, Holger

    2007-01-01

    Afganistanis teeninud kolm Eesti kaitseväelast nõuavad kaitseväelt Tallinna halduskohtus igaüks enam kui poolt miljonit krooni. Tööõigusbüroo Labour Consulting juristi Katrin Sarapi sõnul pole selliseks nõudeks alust. Vt. samas: Rahanõudjad teenivad edasi

  4. Influence of the density pole on the performances of its gamma ...

    African Journals Online (AJOL)

    In this paper, we aim at highlighting the in uence of the density pole on the performances of its gamma-kernel estimator. To do this, we performed a comparative study for the performances of the gamma-kernel estimators with those provided by other bias effect correction techniques at the bounds, using the simulation ...

  5. Weak regularizability and pole assignment for non-square linear systems

    Czech Academy of Sciences Publication Activity Database

    Korotka, Tetiana; Loiseau, J. J.; Zagalak, Petr

    2012-01-01

    Roč. 48, č. 6 (2012), s. 1065-1088 ISSN 0023-5954 R&D Projects: GA ČR GAP103/12/2431 Keywords : linear systems * linear state feedback * pole assignment Subject RIV: BC - Control Systems Theory Impact factor: 0.619, year: 2012 http://library.utia.cas.cz/separaty/2013/AS/korotka-0386325.pdf

  6. Robust pole placement for second-order systems: an LMI approach

    Czech Academy of Sciences Publication Activity Database

    Henrion, D.; Šebek, Michael; Kučera, Vladimír

    2005-01-01

    Roč. 41, č. 1 (2005), s. 1-14 ISSN 0023-5954 R&D Projects: GA ČR GA102/02/0709 Institutional research plan: CEZ:AV0Z10750506 Keywords : polynomial matrix * second-order linear systems * LMI * pole placement * robust control Subject RIV: BC - Control Systems Theory Impact factor: 0.343, year: 2005

  7. Electrical power line and pole removal radiological survey completion report: Revision 2

    International Nuclear Information System (INIS)

    1989-02-01

    Each electric power pole and all wire, cross members, and attached hardware were radiologically surveyed and removed. The survey procedures did not conform in every respect with the planned procedures because the actual work differed from the removal plan. The survey showed that all contamination was fixed. Certain poles that were suspected of being contaminated with Th-230 were cut off one foot above ground level and left on site. Each truck load of materials was checked at the access point to ensure it met release criteria. Wood samples were taken from all the poles at Building 403 and 5% of all the rest and analyzed for U-238 and Th-232. Only U-238 was detected. 1903 bundles of wire (95,150 lin ft) were released, and 76 bundles (1520 lin ft) were found to be contaminated. 7163 lin ft of power pole material were released, and 1484 lin ft were contaminated. A comprehensive quality measure assurance/quality control program was applied to this work

  8. Spontaneous Temporal Pole Encephalocele Presenting with Epilepsy: Report of Two Cases.

    Science.gov (United States)

    Shimada, Seijiro; Kunii, Naoto; Kawai, Kensuke; Usami, Kenichi; Matsuo, Takeshi; Uno, Takeshi; Koizumi, Tomoyuki; Saito, Nobuhito

    2015-09-01

    Refractory temporal lobe epilepsy due to spontaneous temporal pole encephalocele is a rare but increasingly recognized condition. Optimal surgical management is complicated by the lack of knowledge regarding both the extent of the epileptogenic area and the need for repair of the encephalocele. We report two cases that add significant information to these issues. In Case 1, with a 5-year history of refractory seizures, implantation of diagnostic subdural electrodes into the anterior temporal base happened to abolish the seizures completely. No structural changes were evident on postoperative magnetic resonance imaging. In Case 2, with a large encephalocele and a 5-year history of refractory seizures, surgical disconnection of the temporal pole successfully abolished seizures without any need for encephalocele repair. These two cases support the view that the epileptogenic area is confined to within the temporal pole for spontaneous temporal pole encephalocele. Temporopolar disconnection represents one surgical option for this entity that achieves seizure cessation without requiring extra repair procedures. Copyright © 2015 Elsevier Inc. All rights reserved.

  9. Metabolic and mechanical involvement of arms and legs in simulated double pole skiing

    DEFF Research Database (Denmark)

    Rud, B; Secher, N H; Nilsson, J

    2014-01-01

    We evaluated arm and leg work rate and metabolism during double pole ergometer skiing. Thermodilution arm and leg blood flow was determined together with the arterial to venous difference for oxygen, while the work rate was assessed in eight male recreational skiers [24 (SD 7) years]. When work r...

  10. Firn Air Isotope and Temperature Measurements from Siple Dome and South Pole, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set includes d15N, d18O/2, dO2/N2/4, d40Ar/4, d38/Ar/2, d84Kr/48, and d132Xe/96 values for air drawn from the top 15 to 50 m of firn at the South Pole...

  11. Combined mismatch repair and POLE/POLD1 defects explain unresolved suspected Lynch syndrome cancers

    NARCIS (Netherlands)

    Jansen, Anne Ml; van Wezel, Tom; van den Akker, Brendy Ewm; Ventayol Garcia, Marina; Ruano, Dina; Tops, Carli Mj; Wagner, Anja; Letteboer, Tom Gw; Gómez-García, Encarna B; Devilee, Peter; Wijnen, Juul T; Hes, Frederik J; Morreau, Hans

    Many suspected Lynch Syndrome (sLS) patients who lack mismatch repair (MMR) germline gene variants and MLH1 or MSH2 hypermethylation are currently explained by somatic MMR gene variants or, occasionally, by germline POLE variants. To further investigate unexplained sLS patients, we analyzed

  12. Application of ring lasers to determine the directions to the poles of Earth's rotation

    International Nuclear Information System (INIS)

    Golyaev, Yu D; Kolbas, Yu Yu

    2012-01-01

    Application of a ring laser to determine the directions to the poles of Earth's rotation is considered. The maximum accuracy of determining the directions is calculated, physical and technical mechanisms that limit the accuracy are analysed, and the instrumental errors are estimated by the example of ring He — Ne lasers with Zeeman biasing. (laser applications and other topics in quantum electronics)

  13. Generation of Polarization Squeezing with Periodically Poled KTP at 1064 nm

    DEFF Research Database (Denmark)

    Lassen, Mikael Østergaard; Sabuncu, Metin; Buchhave, Preben

    2007-01-01

    We report the experimental demonstration of directly produced polarization squeezing at 1064 nm from a type I optical parametric amplifier (OPA) based on a periodically poled KTP crystal (PPKTP). The orthogonal polarization modes of the polarization squeezed state are both defined by the OPA cavity...

  14. Physical deterioration of preservative treated poles and pilings exposed to salt water

    Science.gov (United States)

    Grant T. Kirker; Jessie Glaeser; Stan T. Lebow; Frederick Green III; Carol A. Clausen

    2011-01-01

    This report details the results of laboratory analyses of wooden pilings sent to the USDA Forest Products Laboratory in March 2011. These samples were removed from coastal wooden posts, poles, piles, and deck boards. A total of 22 samples, consisting of either core borings or surface fiber samples, were removed from four installations along the South Carolina coast....

  15. Saddles and trajectories and poles and surface waves in heavy ion elastic scattering

    International Nuclear Information System (INIS)

    Rowley, N.; Marty, C.

    1976-01-01

    The pictures of complex trajectories and surface waves for heavy ion scattering are discussed through the various terms of the Poisson summation formula. Well defined regions of the complex angular momentum plane appear to be important and some of them, but not all, may correspond to Regge poles [fr

  16. Direct localization of poles of a meromorphic function from measurements on an incomplete boundary

    Science.gov (United States)

    Nara, Takaaki; Ando, Shigeru

    2010-01-01

    This paper proposes an algebraic method to reconstruct the positions of multiple poles in a meromorphic function field from measurements on an arbitrary simple arc in it. A novel issue is the exactness of the algorithm depending on whether the arc is open or closed, and whether it encloses or does not enclose the poles. We first obtain a differential equation that can equivalently determine the meromorphic function field. From it, we derive linear equations that relate the elementary symmetric polynomials of the pole positions to weighted integrals of the field along the simple arc and end-point terms of the arc when it is an open one. Eliminating the end-point terms based on an appropriate choice of weighting functions and a combination of the linear equations, we obtain a simple system of linear equations for solving the elementary symmetric polynomials. We also show that our algorithm can be applied to a 2D electric impedance tomography problem. The effects of the proximity of the poles, the number of measurements and noise on the localization accuracy are numerically examined.

  17. Design and analysis of a transversal-flux switched-reluctance-linear-machine pole-pair

    Energy Technology Data Exchange (ETDEWEB)

    Salo, J.

    1999-07-01

    The Switched Reluctance technology is probably best suited for industrial low-speed or zerospeed applications where the power can be small but the torque or the force in linear movement cases might be relatively high. Because of its simple structure the Sit-motor is an interesting alternative for low power applications where pneumatic or hydraulic linear drives are to be avoided. This study analyses the basic parts of an LSR-motor which are the two mover poles and one stator pole and which form the 'basic pole pair' in linear-movement transversal-flux switched-reluctance motors. The static properties of the basic pole pair are modelled and the basic design rules are derived. The models developed are validated with experiments. A one-sided one-polepair transversal-flux switched-reluctance-linear-motor prototype is demonstrated and its static properties are measured. The modelling of the static properties is performed with FEM-calculations. Two-dimensional models are accurate enough to model the static key features for the basic dimensioning of LSRmotors. Three-dimensional models must be used in order to get the most accurate calculation results of the static traction force production. The developed dimensioning and modelling methods, which could be systematically validated by laboratory measurements, are the most significant contributions of this thesis. (orig.)

  18. Poling effect of a charge-trapping layer in glass waveguides

    DEFF Research Database (Denmark)

    Ren, Yitao; Marckmann, Carl Johan; Jacobsen, Rune Shim

    2004-01-01

    Germanium-doped multi-layer waveguides containing a silicon oxy-nitride layer as a charge trapper are thermally poled in an air environment. Compared to the waveguides without the trapping layer, the induced linear electro-optic coefficient increases more than 20%. A comparable rise in the internal...

  19. Effect of changing the pole profile in a gradient septum magnet

    International Nuclear Information System (INIS)

    Armstrong, A.G.A.M.

    1977-05-01

    A tapered-pole gradient septum magnet was fitted with wedge-shaped shims to make the gap parallel. The resulting field was measured and compared with the predicted field from the GFUN magnetostatic computer program. A method of estimating the beam loss due to kick non-uniformity is presented. (author)

  20. 76 FR 4078 - Television Broadcasting Services; North Pole and Plattsburgh, NY

    Science.gov (United States)

    2011-01-24

    ... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 73 [DA 10-2443; MM Docket No. 99-238; RM-9669] Television Broadcasting Services; North Pole and Plattsburgh, NY AGENCY: Federal Communications Commission... CFR Part 73 Television, Television broadcasting. For the reasons discussed in the preamble, the...

  1. The effect of pole's height on the output performance of solar power ...

    African Journals Online (AJOL)

    Solar energy is a renewable (non-conventional) source of energy supply that has been used as a reliable energy source in view of its economic importance and its wide range of applications. In this study the effect of pole's height on the output performance of solar power system has been investigated. A solar panel of 45 ...

  2. Monitoring with a modified Robel pole on meadows in the central Black Hills of South Dakaota

    Science.gov (United States)

    Daniel W. Uresk; Ted A. Benzon

    2007-01-01

    This study using a modified Robel pole was conducted in the central Black Hills, South Dakota. The objectives were to test the relationship between visual obstruction readings and standing herbage, develop guidelines for monitoring, and estimate sample size. The relationship between visual obstruction and standing herbage was linear with 2 segments in a piecewise model...

  3. Flux Concentration and Pole Shaping in a Single Phase Hybrid Switched Reluctance Motor Drive

    DEFF Research Database (Denmark)

    Jakobsen, Uffe; Lu, Kaiyuan

    2010-01-01

    The single phase hybrid switched reluctance motor (HSRM) may be a good candidate for low-cost drives used for pump applications. This paper presents a new design of the HSRM with improved starting torque achieved by stator pole shaping, and a better arrangement of the embedded stator permanent...

  4. Giant Strain and Induced Ferroelectricity in Amorphous BaTiO3 Films under Poling

    Directory of Open Access Journals (Sweden)

    Pegah Mirzadeh Vaghefi

    2017-09-01

    Full Text Available We report an effect of giant surface modification of a 5.6 nm thick BaTiO3 film grown on Si (100 substrate under poling by conductive tip of a scanning probe microscope (SPM. The surface can be locally elevated by about 9 nm under −20 V applied during scanning, resulting in the maximum strain of 160%. The threshold voltage for the surface modification is about 12 V. The modified topography is stable enough with time and slowly decays after poling with the rate ~0.02 nm/min. Strong vertical piezoresponse after poling is observed, too. Combined measurements by SPM and piezoresponse force microscopy (PFM prove that the poled material develops high ferroelectric polarization that cannot be switched back even under an oppositely oriented electric field. The topography modification is hypothesized to be due to a strong Joule heating and concomitant interface reaction between underlying Si and BaTiO3. The top layer is supposed to become ferroelectric as a result of local crystallization of amorphous BaTiO3. This work opens up new possibilities to form nanoscale ferroelectric structures useful for various applications.

  5. Kivina kukkunud nafta hinna mõju pole näha / Mariliis Pinn

    Index Scriptorium Estoniae

    Pinn, Mariliis

    2008-01-01

    Samal ajal kui Soome nafta- ja gaasiliidu juht Jarmo Nupponeni hinnangul pole nafta kõrge hind põhjendatud, ei prognoosi Eesti kütusemüüjad bensiinihinna langust. Kommenteerib Tõnis Oja. Graafik: Neste marginaal on kosunud. Lisa: Number

  6. Subtotal splenectomy preserving the lower pole in rats: technical, morphological and functional aspects

    Directory of Open Access Journals (Sweden)

    Paulo Danilo Nagib Salomão

    2006-01-01

    Full Text Available PURPOSE: To assess the possibility of preserving the lower pole of the spleen, supplied by the inferior lobar vessels and segmental vessels, or by vessels of the gastrosplenic ligament, in subtotal splenectomy; to study the viability and function of the lower pole of the spleen. METHODS: Thirty-six male Wistar rats were used in this study. Said animals weighed 273-390 g ( 355.2 ? 30.5 g , and were randomly distributed into three groups. Group 1 comprised ten animals which were submitted to exploratory laparotomy with spleen manipulation (sham operation. Group 2 comprised 16 animals which were submitted to total splenectomy. Group 3 comprised ten animals which were submitted to subtotal splenectomy, preserving the lower pole of the spleen. Blood was collected from all animals before and 90 days after surgery to measure the levels of cholesterol and triglycerides. The animals were sacrificed 90 days after surgery. Spleens and remaining spleens were removed for macroscopic and microscopic examination. RESULTS: Surgery was performed with no complications in all groups. Six animals died in group 2. Spleens of groups 1 and 2, and lower poles of group 3 were macroscopically viable. Apparent white pulp hyperplasia was observed in group 1. In group 3, slight inflammation and capsular fibrosis were observed at the incision site, as well as diffuse hemosiderosis in the red pulp. Average mass of remaining spleen was 35.84% ? 4.31%. No significant difference was observed between preoperative and late postoperative lipid levels in groups 1 and 3 (p > 0.05. Late postoperative lipid levels significantly increased in group 2. CONCLUSIONS: Preservation of the lower pole of the spleen (supplied by gastrosplenic vessels or inferior lobar vessels and segmental vessels was possible with subtotal splenectomy. The lower pole was macroscopically and microscopically viable in all cases. Subtotal splenectomy preserving the lower pole prevented changes in lipid levels

  7. Transient eastward-propagating long-period waves observed over the South Pole

    Directory of Open Access Journals (Sweden)

    S. E. Palo

    Full Text Available Observations of the horizontal wind field over the South Pole were made during 1995 using a meteor radar. These data have revealed the presence of a rich spectrum of waves over the South Pole with a distinct annual occurrence. Included in this spectrum are long-period waves, whose periods are greater than one solar day, which are propagating eastward. These waves exhibit a distinct seasonal occurrence where the envelope of wave periods decreases from a period of 10 days near the fall equinox to a minimum of 2 days near the winter solstice and then progresses towards a period near 10 days at the spring equinox. Computation of the meridional gradient of quasi-geostrophic potential vorticity has revealed a region in the high-latitude upper mesosphere which could support an instability and serve as a source for these waves. Estimation of the wave periods which would be generated from an instability in this region closely resembles the observed seasonal variation in wave periods over the South Pole. These results are consistent with the hypothesis that the observed eastward propagating long-period waves over the South Pole are generated by an instability in the polar upper mesosphere. However, given our limited data set we cannot rule out a stratospheric source. Embedded in this spectrum of eastward propagating waves during the austral winter are a number of distinct wave events. Eight such wave events have been identified and localized using a constant-Q filter bank. The periods of these wave events ranges from 1.7 to 9.8 days and all exist for at least 3 wave periods. Least squares analysis has revealed that a number of these events are inconsistent with a wave propagating zonally around the geographic pole and could be related to waves propagating around a dynamical pole which is offset from the geographic pole. Additionally, one event which was observed appears to be a standing oscillation.

    Key words. Meteorology and atmospheric

  8. Long-Term Bending Creep Behavior of Thin-Walled CFRP Tendon Pretensioned Spun Concrete Poles

    Directory of Open Access Journals (Sweden)

    Giovanni P. Terrasi

    2014-07-01

    Full Text Available This paper discusses the long-term behavior of a series of highly-loaded, spun concrete pole specimens prestressed with carbon fiber-reinforced polymer (CFRP tendons, which were subjected to outdoor four-point bending creep tests since 1996 in the frame of collaboration with the Swiss precast concrete producer, SACAC (Società Anonima Cementi Armati Centrifugati. The 2 m span cylindrical beams studied are models for lighting poles produced for the last 10 years and sold on the European market. Five thin-walled pole specimens were investigated (diameter: 100 mm; wall-thickness: 25–27 mm. All specimens were produced in a pretensioning and spinning technique and were prestressed by pultruded CFRP tendons. Initially, two reference pole specimens were tested in quasi-static four-point bending to determine the short-term failure moment and to model the short-term flexural behavior. Then, three pole specimens were loaded to different bending creep moments: while the lowest loaded specimen was initially uncracked, the second specimen was loaded with 50% of the short-term bending failure moment and exhibited cracking immediately after load introduction. The highest loaded pole specimen sustained a bending moment of 72% of the short-term bending failure moment for 16.5 years before failing in July 2013, due to the bond failure of the tendons, which led to local crushing of the high-performance spun concrete (HPSC. Besides this, long-term monitoring of the creep tests has shown a limited time- and temperature-dependent increase of the deflections over the years, mainly due to the creep of the concrete. A concrete creep-based model allowed for the calculation of the long-term bending curvatures with reasonable accuracy. Furthermore, the pole specimens showed crack patterns that were stable over time and minimal slippage of the tendons with respect to the pole’s end-faces for the two lower load levels. The latter proves the successful and durable

  9. Cyclin B degradation leads to NuMA release from dynein/dynactin and from spindle poles.

    Science.gov (United States)

    Gehmlich, Katja; Haren, Laurence; Merdes, Andreas

    2004-01-01

    The protein NuMA localizes to mitotic spindle poles where it contributes to the organization of microtubules. In this study, we demonstrate that NuMA loses its stable association with the spindle poles after anaphase onset. Using extracts from Xenopus laevis eggs, we show that NuMA is dephosphorylated in anaphase and released from dynein and dynactin. In the presence of a nondegradable form of cyclin B (Delta90), NuMA remains phosphorylated and associated with dynein and dynactin, and remains localized to stable spindle poles that fail to disassemble at the end of mitosis. Inhibition of NuMA or dynein allows completion of mitosis, despite inducing spindle pole abnormalities. We propose that NuMA functions early in mitosis during the formation of spindle poles, but is released from the spindle after anaphase, to allow spindle disassembly and remodelling of the microtubule network.

  10. Body punk

    DEFF Research Database (Denmark)

    Mogensen, Kevin

    BODYPUNK - A Treatise on male body builders and the meaning of the body in the shadow of an Anti Doping Campaign Based on a qualitative study, the thesis investigates the visual representation of the male bodybuilder found in the national anti doping campaign: ‗ "The hunt has begun" along...... with an analysis of the embodied meaning of men‘s bodybuilding....

  11. Comparison of UV irradiance measurements at Summit, Greenland; Barrow, Alaska; and South Pole, Antarctica

    Directory of Open Access Journals (Sweden)

    G. Bernhard

    2008-08-01

    Full Text Available An SUV-150B spectroradiometer for measuring solar ultraviolet (UV irradiance was installed at Summit, Greenland, in August 2004. Here we compare the initial data from this new location with similar measurements from Barrow, Alaska, and South Pole. Measurements of irradiance at 345 nm performed at equivalent solar zenith angles (SZAs are almost identical at Summit and South Pole. The good agreement can be explained with the similar location of the two sites on high-altitude ice caps with high surface albedo. Clouds attenuate irradiance at 345 nm at both sites by less than 6% on average, but can reduce irradiance at Barrow by more than 75%. Clear-sky measurements at Barrow are smaller than at Summit by 14% in spring and 36% in summer, mostly due to differences in surface albedo and altitude. Comparisons with model calculations indicate that aerosols can reduce clear-sky irradiance at Summit by 4–6%; aerosol influence is largest in April. Differences in total ozone at the three sites have a large influence on the UV Index. At South Pole, the UV Index is on average 20–80% larger during the ozone hole period than between January and March. At Summit, total ozone peaks in April and UV Indices in spring are on average 10–25% smaller than in the summer. Maximum UV Indices ever observed at Summit, Barrow, and South Pole are 6.7, 5.0, and 4.0, respectively. The larger value at Summit is due to the site's lower latitude. For comparable SZAs, average UV Indices measured during October and November at South Pole are 1.9–2.4 times larger than measurements during March and April at Summit. Average UV Indices at Summit are over 50% greater than at Barrow because of the larger cloud influence at Barrow.

  12. Genetic reporter system for positioning of proteins at the bacterial pole.

    Science.gov (United States)

    Fixen, Kathryn R; Janakiraman, Anuradha; Garrity, Sean; Slade, Daniel J; Gray, Andrew N; Karahan, Nilay; Hochschild, Ann; Goldberg, Marcia B

    2012-01-01

    Spatial organization within bacteria is fundamental to many cellular processes, although the basic mechanisms underlying localization of proteins to specific sites within bacteria are poorly understood. The study of protein positioning has been limited by a paucity of methods that allow rapid large-scale screening for mutants in which protein positioning is altered. We developed a genetic reporter system for protein localization to the pole within the bacterial cytoplasm that allows saturation screening for mutants in Escherichia coli in which protein localization is altered. Utilizing this system, we identify proteins required for proper positioning of the Shigella autotransporter IcsA. Autotransporters, widely distributed bacterial virulence proteins, are secreted at the bacterial pole. We show that the conserved cell division protein FtsQ is required for localization of IcsA and other autotransporters to the pole. We demonstrate further that this system can be applied to the study of proteins other than autotransporters that display polar positioning within bacterial cells. Many proteins localize to specific sites within bacterial cells, and localization to these sites is frequently critical to proper protein function. The mechanisms that underlie protein localization are incompletely understood, in part because of the paucity of methods that allow saturation screening for mutants in which protein localization is altered. We developed a genetic reporter assay that enables screening of bacterial populations for changes in localization of proteins to the bacterial pole, and we demonstrate the utility of the system in identifying factors required for proper localization of the polar Shigella autotransporter protein IcsA. Using this method, we identify the conserved cell division protein FtsQ as being required for positioning of IcsA to the bacterial pole. We demonstrate further that the requirement for FtsQ for polar positioning applies to other autotransporters

  13. The new Permian-Triassic paleomagnetic pole for the East European Platform corrected for inclination shallowing

    Science.gov (United States)

    Fetisova, A. M.; Veselovskiy, R. V.; Scholze, F.; Balabanov, Yu. P.

    2018-01-01

    The results of detailed paleomagnetic studies in seven Upper Permian and Lower Triassic reference sections of East Europe (Middle Volga and Orenburg region) and Central Germany are presented. For each section, the coefficient of inclination shallowing f (King, 1955) is estimated by the Elongation-Inclination (E-I) method (Tauxe and Kent, 2004) and is found to vary from 0.4 to 0.9. The paleomagnetic directions, corrected for the inclination shallowing, are used to calculate the new Late Permian-Early Triassic paleomagnetic pole for the East European Platform (N = 7, PLat = 52.1°, PLong = 155.8°, A95 = 6.6°). Based on this pole, the geocentric axial dipole hypothesis close to the Paleozoic/Mesozoic boundary is tested by the single plate method. The absence of the statistically significant distinction between the obtained pole and the average Permian-Triassic (P-Tr) paleomagnetic pole of the Siberian Platform and the coeval pole of the North American Platform corrected for the opening of the Atlantic (Shatsillo et al., 2006) is interpreted by us as evidence that 250 Ma the configuration of the magnetic field of the Earth was predominantly dipolar; i.e., the contribution of nondipole components was at most 10% of the main magnetic field. In our opinion, the hypothesis of the nondipolity of the geomagnetic field at the P-Tr boundary, which has been repeatedly discussed in recent decades (Van der Voo and Torsvik, 2001; Bazhenov and Shatsillo, 2010; Veselovskiy and Pavlov, 2006), resulted from disregarding the effect of inclination shallowing in the paleomagnetic determinations from sedimentary rocks of "stable" Europe (the East European platform and West European plate).

  14. Potential for α -induced nuclear scattering, reaction and decay, and a resonance-pole-decay model with exact explicit analytical solutions

    Science.gov (United States)

    Sahu, Basudeb; Bhoi, Swagatika

    2017-10-01

    The decay of α particle from a nucleus is viewed as a quantum resonance state of a two-body scattering process of the α +daughter nucleus pair governed by a novel nucleus-nucleus potential in squared Woods-Saxon form. By the application of the rigorous optical model (OM) potential scattering (S -matrix) theory the genuineness of the potential for the system is established by giving a good explanation of the elastic scattering and reaction cross sections data of the α +nucleus pair. From the pole position in the complex momentum (k ) plane of the S matrix of the real part of the OM potential defined above, the energy and width of the resonance state akin to the decaying state of emission of α particle are extracted and from this width, the result of the α -decay half-life is derived to account for the experimental result of the half-life in the cases of a large number of α emitters including heavy and superheavy nuclei. The S matrix of the real OM potential is replaced by an analytical function expressed in terms of exact Schrödinger solutions of a global potential that closely represents the real Coulomb-nuclear interaction in the interior and the pure Coulomb wave functions outside, and the resonant poles of this S matrix in the complex momentum plane are used to give satisfactory results of decay half-lives of α coming out from varieties of nuclei.

  15. Development of the cryo-rotary joint for a HTS synchronous motor with Gd-bulk HTS field-pole magnets

    Energy Technology Data Exchange (ETDEWEB)

    Miki, M; Felder, B; Tsuzuki, K; Izumi, M [Department of Marine Electronics and Mechanical Engineering, Tokyo University of Marine Science and Technology, 2-1-6, Etchu-jima, Koto-ku, Tokyo 135-8533 (Japan); Hayakawa, H, E-mail: d082025@kaiyodai.ac.j [Kitano Seiki Co. Ltd., 7-17-3, Chuo, Ohta-ku, Tokyo 143-0024 (Japan)

    2010-06-01

    We have studied a prototype of an axial-gap type synchronous motor with Gd-bulk HTS field-pole magnets since 2001. At the liquid nitrogen temperature, these bulks have trapped over 1 T inside the motor after being applied the pulsed field magnetization method. Increasing the flux of the field poles is the most straightforward way of improving the output power of the motor. Cooling down the bulk HTS magnets below the liquid nitrogen temperature provides an effective alternative to increase the magnetic flux trapping. In 2007, we exchanged the cryogen from liquid nitrogen to condensed neon. The key technology of this challenge is a rotary joint, introducing a fluid cryogen into the rotating body in the motor from the static reservoir. We have successfully developed a compact rotary joint which is smaller and lighter than the existent one (1/10 volume, 1/3 length and 1/12 weight). The present joint was manufactured and evaluated with liquid nitrogen and condensed neon. We presume a total heat loss of this rotary joint of less than 10 watts. Successful cooling and rotating tests of the bulk-HTS motor with this novel rotary joint are conducted.

  16. Signifying Bodies

    DEFF Research Database (Denmark)

    of biosemiosis connect signifying bodies with their natural surroundings, cultural activities and subjective experiences. Health stretches all the way from the ecosocial surroundings, through the skin and into the self-organizing processes of every living cell. Signifying Bodies lays out a new approach to health...... and health care. Eschewing all forms of dualism, the authors emphasise the interdependency of how we act, think, feel and function. They advocate a relational turn in health care, in which bodies live and learn from suffering and care. In this view, health is inseparable from both living beings...

  17. Study of the effects of wind power and vortex-induced vibrations to establish fatigue design criteria for high-mast poles.

    Science.gov (United States)

    2011-08-01

    Traffic signal and high-mast poles are used by transportation agencies to control and illuminate intersections; their structural design is governed by national specifications. High-mast poles are luminaire supports located near highway interchanges t...

  18. 75 FR 65650 - Notice of Closure to Motorized Vehicle Travel on Public Lands in the Big Pole Fire Area in Tooele...

    Science.gov (United States)

    2010-10-26

    ... Land Management (BLM), within the Big Pole Fire area in Tooele County, Utah. DATES: This temporary... of Closure to Motorized Vehicle Travel on Public Lands in the Big Pole Fire Area in Tooele County, UT... 65651

  19. Application of the Matrix Pencil Method for Estimating the SEM (Singularity Expansion Method) Poles of Source Free Transient Responses From Multiple Look Directions

    National Research Council Canada - National Science Library

    Sarkar, Tapan

    2000-01-01

    .... The SEM poles are independent of the angle at which the transient response is recorded. The only difference between the various waveforms are that the residues at the various poles are of different magnitudes...

  20. Impact of renal anatomy on shock wave lithotripsy outcomes for lower pole kidney stones: results of a prospective multifactorial analysis controlled by computerized tomography.

    Science.gov (United States)

    Torricelli, Fabio C M; Marchini, Giovanni S; Yamauchi, Fernando I; Danilovic, Alexandre; Vicentini, Fabio C; Srougi, Miguel; Monga, Manoj; Mazzucchi, Eduardo

    2015-06-01

    We evaluated which variables impact fragmentation and clearance of lower pole calculi after shock wave lithotripsy. We prospectively evaluated patients undergoing shock wave lithotripsy for a solitary 5 to 20 mm lower pole kidney stone between June 2012 and August 2014. Patient body mass index and abdominal waist circumference were recorded. One radiologist blinded to shock wave lithotripsy outcomes measured stone size, area and density, stone-to-skin distance, infundibular length, width and height, and infundibulopelvic angle based on baseline noncontrast computerized tomography. Fragmentation, success (defined as residual fragments less than 4 mm in asymptomatic patients) and the stone-free rate were evaluated by noncontrast computerized tomography 12 weeks postoperatively. Univariate and multivariate analysis was performed. A total of 100 patients were enrolled in the study. Mean stone size was 9.1 mm. Overall fragmentation, success and stone-free rates were 76%, 54% and 37%, respectively. On logistic regression body mass index (OR 1.27, 95% CI 1.11-1.49, p = 0.004) and stone density (OR 1.0026, 95% CI 1.0008-1.0046, p = 0.005) significantly impacted fragmentation. Stone size (OR 1.24, 95% CI 1.07-1.48, p = 0.039) and stone density (OR 1.0021, 95% CI 1.0007-1.0037, p = 0.012) impacted the success rate while stone size (OR 1.24, 95% CI 1.04-1.50, p = 0.029), stone density (OR 1.0015, 95% CI 1.0001-1.0032, p = 0.046) and infundibular length (OR 1.1035, 95% CI 1.015-1.217, p = 0.015) impacted the stone-free rate. The best outcomes were found in patients with a body mass index of 30 kg/m(2) or less, stones 10 mm or less and 900 HU or less, and an infundibular length of 25 mm or less. The coexistence of significant unfavorable variables led to a stone-free rate of less than 20%. Obese patients with higher than 10 mm density stones (greater than 900 HU) in the lower pole of the kidney with an infundibular length of greater than 25 mm should be discouraged from

  1. Body Piercing

    Science.gov (United States)

    ... Health Medical Conditions Nutrition & Fitness Emotional Health Body Piercing Posted under Health Guides . Updated 1 August 2017. + ... medical reasons why I should not get a piercing? Yes. There are medical conditions (see the list ...

  2. Building on IPY Data, Collaborations and Infrastructure to Understand the Changing Poles (Invited)

    Science.gov (United States)

    Bell, R. E.; Krupnik, I.; Hik, D.; Alverson, K. D.; Drinkwater, M. R.

    2010-12-01

    In contrast to previous IPY programs that were driven by a central organizing group, the 2007-9 IPY emerged from more than 1000 ideas provided by the global science community. This global IPY planning process produced six major themes that framed the IPY programs. Three themes focused on change at the poles, one focused on probing the frontiers of the polar science, one targeted on using the polar regions as vantage points to look beyond into space and a sixth theme targeted integrated studies of polar cultural, historical and social processes. The results of the IPY 2007-9 are just beginning to emerge. Benchmark data sets were acquired such as coordinated imaging of the poles from space, systematic ocean measurements and a census of marine life. IPY programs have documented how ongoing polar change from permafrost to ecosystems varies regionally depending on local conditions. Analysis of past change in ecosystems, sediment cores and numeric models indicate that during periods with elevated temperatures and atmospheric CO2, the West Antarctic ice sheet can collapse repeatedly. Studies of the polar oceans have confirmed a strong connection between the mid-latitudes and polar processes. The efforts to explore the poles have revealed explosive volcanism beneath the Arctic Ocean, strong genetic similarities between microbes at the two poles and dynamic processes at the base of the East Antarctic ice sheet. IPY programs looking beyond the poles imaged new galaxies and identified new linkages between solar output and weather. The early insights from IPY 2007-9 are remarkable. Building on these will be a challenge for the science community and science agencies over the next decade. The IPY data must be archived and made available to the broad science community to ensure it is preserved as a vital benchmark. The collaborations between scientists, agencies, Arctic residents and institutions initiated by the IPY structure must be fostered and continued. Successful scientific

  3. EFFECTS OF RUN-UP VELOCITY ON PERFORMANCE, KINEMATICS, AND ENERGY EXCHANGES IN THE POLE VAULT

    Directory of Open Access Journals (Sweden)

    Nicholas P. Linthorne

    2012-06-01

    Full Text Available This study examined the effect of run-up velocity on the peak height achieved by the athlete in the pole vault and on the corresponding changes in the athlete's kinematics and energy exchanges. Seventeen jumps by an experienced male pole vaulter were video recorded in the sagittal plane and a wide range of run-up velocities (4.5-8.5 m/s was obtained by setting the length of the athlete's run-up (2-16 steps. A selection of performance variables, kinematic variables, energy variables, and pole variables were calculated from the digitized video data. We found that the athlete's peak height increased linearly at a rate of 0.54 m per 1 m/s increase in run-up velocity and this increase was achieved through a combination of a greater grip height and a greater push height. At the athlete's competition run-up velocity (8.4 m/s about one third of the rate of increase in peak height arose from an increase in grip height and about two thirds arose from an increase in push height. Across the range of run-up velocities examined here the athlete always performed the basic actions of running, planting, jumping, and inverting on the pole. However, he made minor systematic changes to his jumping kinematics, vaulting kinematics, and selection of pole characteristics as the run-up velocity increased. The increase in run-up velocity and changes in the athlete's vaulting kinematics resulted in substantial changes to the magnitudes of the energy exchanges during the vault. A faster run-up produced a greater loss of energy during the take-off, but this loss was not sufficient to negate the increase in run-up velocity and the increase in work done by the athlete during the pole support phase. The athlete therefore always had a net energy gain during the vault. However, the magnitude of this gain decreased slightly as run-up velocity increased

  4. Nest-building behavior of Monk Parakeets and insights into potential mechanisms for reducing damage to utility poles

    Directory of Open Access Journals (Sweden)

    Kevin R. Burgio

    2014-09-01

    Full Text Available The Monk Parakeet (Myiopsitta monachus commonly uses utility poles as a substrate for building large, bulky nests. These nests often cause fires and electric power outages, creating public safety risks and increasing liability and maintenance costs for electric companies. Previous research has focused on lethal methods and chemical contraception to prevent nesting on utility poles and electrical substations. However, implementation of lethal methods has led to public protests and lawsuits, while chemical contraception may affect other than the targeted species, and must be continually reapplied for effectiveness. One non-lethal alternative, nest removal, is costly and may not be a sustainable measure if Monk Parakeet populations continue to grow. In order to identify cost-effective non-lethal solutions to problems caused by Monk Parakeet nesting, we studied their behavior as they built nests on utility poles. Monk Parakeets initiate nests by attaching sticks at the intersection of the pole and electric lines. We found that parakeets use the electric lines exclusively to gain access to the intersection of lines and pole during nest initiation, and continue to use the lines intensively throughout construction. Monk Parakeets also have more difficulty attaching sticks during the early stages of nest construction than when the nest is nearing completion. These findings suggest that intervention during the earlier stages of nest building, by excluding Monk Parakeets from electric lines adjacent to poles, may be an effective, non-lethal method of reducing or eliminating parakeets nesting on, and damaging, utility poles.

  5. Two-Degree-of-Freedom Self-Tuning Control for Motor Drives Using Pole-Zero Cancellation Method

    Science.gov (United States)

    Takano, Akio

    In this paper, we present an excellent method named pole-zero cancellation (PZC) for designing motor control systems. PZC is performed in the z plane. A control system consists of three controllers, i.e., a speed controller, a position controller, and an adaptive identifier. The speed controller has two degrees of freedom: disturbance suppression and tracking speed, both of which can be regulated. The pulse transfer function used for regulating the tracking speed has two poles and one zero. When one pole and one zero coincide and cancel each other, the pulse transfer function is of the first-order lag type, and overshoots do not appear. The adaptive controller determines the coefficients of the pulse transfer function and adjusts the speed controller automatically so that the poles and zeros coincide. The transfer function of the position controller also has one pole and one zero, which cancel another pole and zero; pole 1 in the closed loop is not cancelled, and hence, position overshoots do not appear. A 2.2-kW induction motor is tested. The motor torque is controlled using a rapid torque control method. In this paper, first, the tracking-speed characteristics and the tracking-position characteristics are presented. Next, the identified transient coefficients are given, and finally, the disturbance-suppression characteristics are discussed. The experimental results prove the usefulness of the proposed method.

  6. The Effects of Walking or Walking-with-Poles Training on Tissue Oxygenation in Patients with Peripheral Arterial Disease

    Directory of Open Access Journals (Sweden)

    Eileen G. Collins

    2012-01-01

    Full Text Available This randomized trial proposed to determine if there were differences in calf muscle StO2 parameters in patients before and after 12 weeks of a traditional walking or walking-with-poles exercise program. Data were collected on 85 patients who were randomized to a traditional walking program ( or walking-with-poles program ( of exercise training. Patients walked for 3 times weekly for 12 weeks. Seventy-one patients completed both the baseline and the 12-week follow-up progressive treadmill tests ( traditional walking and walking-with-poles. Using the near-infrared spectroscopy measures, StO2 was measured prior to, during, and after exercise. At baseline, calf muscle oxygenation decreased from % prior to the treadmill test to % at peak exercise. The time elapsed prior to reaching nadir StO2 values increased more in the traditional walking group when compared to the walking-with-poles group. Likewise, absolute walking time increased more in the traditional walking group than in the walking-with-poles group. Tissue oxygenation decline during treadmill testing was less for patients assigned to a 12-week traditional walking program when compared to those assigned to a 12-week walking-with-poles program. In conclusion, the 12-week traditional walking program was superior to walking-with-poles in improving tissue deoxygenation in patients with PAD.

  7. Nest-building behavior of Monk Parakeets and insights into potential mechanisms for reducing damage to utility poles.

    Science.gov (United States)

    Burgio, Kevin R; Rubega, Margaret A; Sustaita, Diego

    2014-01-01

    The Monk Parakeet (Myiopsitta monachus) commonly uses utility poles as a substrate for building large, bulky nests. These nests often cause fires and electric power outages, creating public safety risks and increasing liability and maintenance costs for electric companies. Previous research has focused on lethal methods and chemical contraception to prevent nesting on utility poles and electrical substations. However, implementation of lethal methods has led to public protests and lawsuits, while chemical contraception may affect other than the targeted species, and must be continually reapplied for effectiveness. One non-lethal alternative, nest removal, is costly and may not be a sustainable measure if Monk Parakeet populations continue to grow. In order to identify cost-effective non-lethal solutions to problems caused by Monk Parakeet nesting, we studied their behavior as they built nests on utility poles. Monk Parakeets initiate nests by attaching sticks at the intersection of the pole and electric lines. We found that parakeets use the electric lines exclusively to gain access to the intersection of lines and pole during nest initiation, and continue to use the lines intensively throughout construction. Monk Parakeets also have more difficulty attaching sticks during the early stages of nest construction than when the nest is nearing completion. These findings suggest that intervention during the earlier stages of nest building, by excluding Monk Parakeets from electric lines adjacent to poles, may be an effective, non-lethal method of reducing or eliminating parakeets nesting on, and damaging, utility poles.

  8. Correlation between temporal pole MRI abnormalities and surface ictal EEG patterns in patients with unilateral mesial temporal lobe epilepsy.

    Science.gov (United States)

    Caboclo, Luís Otávio S F; Garzon, Eliana; Oliveira, Pedro A L; Carrete, Henrique; Centeno, Ricardo S; Bianchin, Marino M; Yacubian, Elza Márcia T; Sakamoto, Américo C

    2007-01-01

    The objective of this retrospective study is to analyze ictal patterns observed during continuous Video-EEG monitoring in patients with temporal lobe epilepsy (TLE) due to unilateral hippocampal sclerosis (HS), and to correlate these EEG patterns to temporal pole abnormalities observed on magnetic resonance imaging exams. We analyzed 147 seizures from 35 patients with TLE and unilateral HS. Ictal patterns were classified and correlated to signal abnormalities and volumetric measures of the temporal poles. Volume differences over 10% were considered abnormal. The most frequent type of ictal pattern was rhythmic theta activity (RTA), encountered in 65.5% of the seizures. Rhythmic beta activity (RBA) was observed in 11% of the seizures, localized attenuation in 8%, interruption of epileptiform discharges in 6%, repetitive discharges in 5.5%, and rhythmic delta activity (RDA) in 4%. Sixty-six percent of the patients presented signal abnormalities in the temporal pole that were always ipsilateral to the HS. Sixty percent presented significant asymmetry of the temporal poles consisting of reduced volume that was also always ipsilateral to HS. Although patients with RTA as the predominant ictal pattern tended to present asymmetry of temporal poles (p=0.305), the ictal EEG pattern did not correlate with temporal pole asymmetry or signal abnormalities. RTA is the most frequent initial ictal pattern in patients with TLE due to unilateral HS. Temporal pole signal changes and volumetric reduction were commonly found in this group of patients, both abnormalities appearing always ipsilateral to the HS. However, neither temporal pole volume reduction nor signal abnormalities correlated with the predominant ictal pattern, suggesting that the temporal poles are not crucially involved in the process of epileptogenesis.

  9. Spatial signals link exit from mitosis to spindle position.

    Science.gov (United States)

    Falk, Jill Elaine; Tsuchiya, Dai; Verdaasdonk, Jolien; Lacefield, Soni; Bloom, Kerry; Amon, Angelika

    2016-05-11

    In budding yeast, if the spindle becomes mispositioned, cells prevent exit from mitosis by inhibiting the mitotic exit network (MEN). The MEN is a signaling cascade that localizes to spindle pole bodies (SPBs) and activates the phosphatase Cdc14. There are two competing models that explain MEN regulation by spindle position. In the 'zone model', exit from mitosis occurs when a MEN-bearing SPB enters the bud. The 'cMT-bud neck model' posits that cytoplasmic microtubule (cMT)-bud neck interactions prevent MEN activity. Here we find that 1) eliminating cMT- bud neck interactions does not trigger exit from mitosis and 2) loss of these interactions does not precede Cdc14 activation. Furthermore, using binucleate cells, we show that exit from mitosis occurs when one SPB enters the bud despite the presence of a mispositioned spindle. We conclude that exit from mitosis is triggered by a correctly positioned spindle rather than inhibited by improper spindle position.

  10. A controllable resistor and its applications in pole-zero tracking frequency compensation methods for LDOs

    International Nuclear Information System (INIS)

    Wang Yi; He Lenian; Ning Zhihua; Shao Yali

    2009-01-01

    This paper presents a controllable resistor, which is formed by a MOS-resistor working in the deep triangle region and an auxiliary circuit. The auxiliary circuit can generate the gate-source voltage which is proportional to the output current of an low dropout regulator for the MOS-resistor. Thus, the equivalent output resistance of the MOS-resistor is inversely proportional to the output current, which is a suitable feature for pole-zero tracking frequency compensation methods. By switching the type of the MOS-resistor and current direction through the auxiliary circuit, the controllable resistor can be suitable for different applications. Three pole-zero tracking frequency compensation methods based on a single Miller capacitor with nulling resistor, unit-gain compensation cell and pseudo-ESR (equivalent serial resistor of load capacitor) power stage have been realized by this controllable resistor. Their advantages and limitations are discussed and verified by simulation results.

  11. Pole-placement Predictive Functional Control for under-damped systems with real numbers algebra.

    Science.gov (United States)

    Zabet, K; Rossiter, J A; Haber, R; Abdullah, M

    2017-11-01

    This paper presents the new algorithm of PP-PFC (Pole-placement Predictive Functional Control) for stable, linear under-damped higher-order processes. It is shown that while conventional PFC aims to get first-order exponential behavior, this is not always straightforward with significant under-damped modes and hence a pole-placement PFC algorithm is proposed which can be tuned more precisely to achieve the desired dynamics, but exploits complex number algebra and linear combinations in order to deliver guarantees of stability and performance. Nevertheless, practical implementation is easier by avoiding complex number algebra and hence a modified formulation of the PP-PFC algorithm is also presented which utilises just real numbers while retaining the key attributes of simple algebra, coding and tuning. The potential advantages are demonstrated with numerical examples and real-time control of a laboratory plant. Copyright © 2017 ISA. All rights reserved.

  12. A Pole Pair Segment of a 2 MW High Temperature Superconducting Wind Turbine Generator

    DEFF Research Database (Denmark)

    Song, Xiaowei (Andy); Mijatovic, Nenad; Kellers, Jürgen

    2016-01-01

    generator and the set-up in terms of the flux density, the operating condition of the HTS winding, and the force-generation capability. Finite element (FE) software MagNet is used to carry out numerical simulations. The findings show that the HTS winding in the set-up is a good surrogate...... for these that would be used in the full generator. The FE simulations also tell that the maximum tangential force generated in the set-up is 3.77% lower than that in the full generator. Good agreement between the values of interest in the set-up and those projected in the full generator has revealed a costeffective......A 2 MW high temperature superconducting (HTS) generator with 24 pole pairs has been designed for the wind turbine application. In order to identify potential challenges and obtain practical knowledge prior to production, a fullsize stationary experimental set-up, which is one pole pair segment...

  13. Levitation Performance of Two Opposed Permanent Magnet Pole-Pair Separated Conical Bearingless Motors

    Science.gov (United States)

    Kascak, Peter; Jansen, Ralph; Dever, Timothy; Nagorny, Aleksandr; Loparo, Kenneth

    2013-01-01

    In standard motor applications, rotor suspension with traditional mechanical bearings represents the most economical solution. However, in certain high performance applications, rotor suspension without contacting bearings is either required or highly beneficial. Examples include applications requiring very high speed or extreme environment operation, or with limited access for maintenance. This paper expands upon a novel bearingless motor concept, in which two motors with opposing conical air-gaps are used to achieve full five-axis levitation and rotation of the rotor. Force in this motor is created by deliberately leaving the motor s pole-pairs unconnected, which allows the creation of different d-axis flux in each pole pair. This flux imbalance is used to create lateral force. This approach is different than previous bearingless motor designs, which require separate windings for levitation and rotation. This paper examines the predicted and achieved suspension performance of a fully levitated prototype bearingless system.

  14. Pole placement algorithm for control of civil structures subjected to earthquake excitation

    Directory of Open Access Journals (Sweden)

    Nikos Pnevmatikos

    2017-04-01

    Full Text Available In this paper the control algorithm for controlled civil structures subjected to earthquake excitation is thoroughly investigated. The objective of this work is the control of structures by means of the pole placement algorithm, in order to improve their response against earthquake actions. Successful application of the algorithm requires judicious placement of the closed-loop eigenvalues from the part of the designer. The pole placement algorithm was widely applied to control mechanical systems. In this paper, a modification in the mathematical background of the algorithm in order to be suitable for civil fixed structures is primarily presented. The proposed approach is demonstrated by numerical simulations for the control of both single and multi-degree of freedom systems subjected to seismic actions. Numerical results have shown that the control algorithm is efficient in reducing the response of building structures, with small amount of required control forces.

  15. Effect of Dangling Bonds on De-Poling Time for Polymeric Electric Field Optical Sensors

    Directory of Open Access Journals (Sweden)

    Amir R. Ali

    2018-01-01

    Full Text Available This paper investigates the possible chemical changes in polydimethylsiloxane (PDMS caused by two different techniques of fabrication for ultra-sensitive electric field optical sensors. The sensing element is a micro-sphere made from 60:1 PDMS (60 parts base silicon elastomer to one part polymer curing agent by volume. The measurement principle is based on the morphology dependent resonances (MDR shifts of the micro-sphere. We present the effects of curing and poling of polymer micro-spheres used as optical sensors. The degree of curing leads to changes in the de-poling time which results from dangling bonds in the polymeric chains. Consequently, the longevity of the sensitivity of the sensor can extended by two orders of magnitude. An analysis is carried out along with preliminary experiments to investigate that behavior.

  16. Finite Element Analysis of Doorframe Structure of Single Oblique Pole Type in Container Crane

    Science.gov (United States)

    Cheng, X. F.; Wu, F. Q.; Tang, G.; Hu, X.

    2017-07-01

    Compared with the composite type, the single oblique pole type has more advantages, such as simple structure, thrift steel and high safe overhead clearance. The finite element model of the single oblique pole type is established in nodes by ANSYS, and more details are considered when the model is simplified, such as the section of Girder and Boom, torque in Girder and Boom occurred by Machinery house and Trolley, density according to the way of simplification etc. The stress and deformation of ten observation points are compared and analyzed, when the trolley is in nine dangerous positions. Based on the result of analysis, six dangerous points are selected to provide reference for the detection and evaluation of container crane.

  17. Hybrid excited claw pole generator with skewed and non-skewed permanent magnets

    Science.gov (United States)

    Wardach, Marcin

    2017-12-01

    This article contains simulation results of the Hybrid Excited Claw Pole Generator with skewed and non-skewed permanent magnets on rotor. The experimental machine has claw poles on two rotor sections, between which an excitation control coil is located. The novelty of this machine is existence of non-skewed permanent magnets on claws of one part of the rotor and skewed permanent magnets on the second one. The paper presents the construction of the machine and analysis of the influence of the PM skewing on the cogging torque and back-emf. Simulation studies enabled the determination of the cogging torque and the back-emf rms for both: the strengthening and the weakening of magnetic field. The influence of the magnets skewing on the cogging torque and the back-emf rms have also been analyzed.

  18. Hybrid excited claw pole generator with skewed and non-skewed permanent magnets

    Directory of Open Access Journals (Sweden)

    Wardach Marcin

    2017-12-01

    Full Text Available This article contains simulation results of the Hybrid Excited Claw Pole Generator with skewed and non-skewed permanent magnets on rotor. The experimental machine has claw poles on two rotor sections, between which an excitation control coil is located. The novelty of this machine is existence of non-skewed permanent magnets on claws of one part of the rotor and skewed permanent magnets on the second one. The paper presents the construction of the machine and analysis of the influence of the PM skewing on the cogging torque and back-emf. Simulation studies enabled the determination of the cogging torque and the back-emf rms for both: the strengthening and the weakening of magnetic field. The influence of the magnets skewing on the cogging torque and the back-emf rms have also been analyzed.

  19. CERN Proton Synchrotronworking point Matrix for extended pole face winding powering scheme

    CERN Document Server

    Freyermuth, P; Delrieux, M; Genoud, H; Gilardoni, S; Hanke, K; Hans, O; Mataguez, S; Metral, G; Peters, F; Steerenberg, R; Vandorpe, B

    2010-01-01

    The CERN Proton Synchrotron has been continuously improving its beam performances since 1959. The working point parameters of the accelerator are mainly controlled by dedicated windings installed on the poles of the main combined function magnets. In 2007, the power supplies of these windings were renovated and extended from three to five independent groups, allowing exploration of new working point settings. This configuration offers the flexibility of several adjustment strategies such as leaving one current free or to control an additional physical parameter, like Q′′ h. A non-linear chromaticity measurement campaign, at different beam momenta, resulted in matrices defining the relationship between the five pole face winding currents and the four beam parameters Qh, Qv, h, and v. Each cell of these matrices was fitted against momentum. The final result is a single matrix as a function of beam momentum, which is now used by the operational software to trim the working point. This paper summarises this m...

  20. Research of Tan{delta} Measurement of Pole Transformers using DSP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Chul; Lee, Bo Ho [Soong Sil University (Korea, Republic of); Kim, Oun Seok [Korea Electrotechnology Research Institute (Korea, Republic of); Choi, Do Hyuk [Korea Institute of Construction Technology (Korea, Republic of); Lee, Su Kil [Korea Railroad Research Institute (Korea, Republic of)

    1997-04-30

    This paper describes the dissipation factor measuring techniques of insulating oil on operating pole transformers by using digital signal processor. After applying voltage to the condenser which is installed in a transformer, acquiring source voltage and current of condenser and using cross-correlation techniques, we can check the dissipation factor of insulation oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and software such as cross-correlation techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with Schering bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers. (author). 7 refs., 11 figs., 1 tab.

  1. Organic electro-optic thin films by simultaneous vacuum deposition and laser-assisted poling.

    Science.gov (United States)

    Wang, Zhaohong; Sun, Weiwei; Chen, Antao; Kosilkin, Ilya; Bale, Denise; Dalton, Larry R

    2011-08-01

    Organic materials with a high second-order optical nonlinearity have an important application for the next generation of computing, telecommunications, and other industries. Because of a high electro-optic coefficient and low dielectric constant, N-benzyl-2-methyl-4-nitroaniline (BNA) single crystals have been grown and their optical properties have been extensively studied. In this Letter, a poled BNA thin film material was prepared through simultaneous vacuum evaporation and laser-assisted electrical poling. The linear electro-optic coefficients of BNA were measured by a Young's two-slit interference electro-optic measurement method. The dependence of the resulting electro-optic properties on optical power was explored. Enhancement induced by laser illumination was demonstrated. The BNA thin film can exhibit an r(33) value comparable to that of BNA single crystals. © 2011 Optical Society of America

  2. Forward-Backward Charge Asymmetry of Electron Pairs Above the Z0 Pole at CDF

    Science.gov (United States)

    CDF Collaboration

    1996-05-01

    We present a measurement of the forward-backward charge asymmetry of the process pbar p arrow Z0 / γ+X, Z0 / γ arrow e+e- at Q2 > MZ2, using pbar p collisions at √s = 1.8 TeV. The results are from 110 pb-1 of data collected at the Collider Detector at Fermilab during the 1992-1993 and 1994-1995 runs of the Fermilab Tevatron. We measure the asymmetry in a region above the Z0 pole for which Mee > 105 GeV/c2 and in a region near the Z0 pole for which 75 GeV/c2 Fisica Nucleare; the Ministry of Education, Science and Culture of Japan; the Natural Sciences and Engineering Research Council of Canada; the National Science Council of the Republic of China; and the A. P. Sloan Foundation. Supported by U.S. NSF PHY-9406402.

  3. THE ROLE OF THE CONCEPT OF GROWTH POLES FOR REGIONAL DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    KOMAROVSKIY Viktor

    2013-12-01

    Full Text Available This study analyses determinants of the concept of "points of growth" at regional level. The definition of the concept of growth points is considered in terms of economic development of the region, which integrates into the global world. As a basic model of local development is proposed to use the theory for Growth Poles of François Perroux, that later was supplemented by Albert Hirschman. To estimate the possible practical applications of the theory for Growth Poles in the development of local economic development programs and regional planning in the article it is considered the adaptive model of "growth points" with feedback. Using the proposed model allows us to develop an algorithm for the local public administration to identify the most prospective areas for attracting FDI.

  4. The LASP Climate Change Compendium: Looking at Climate Change at the Poles for IPY

    Science.gov (United States)

    Wood, E.; Marks, N.; Cobabe-Ammann, E.; Harvey, L.

    2007-12-01

    Understanding our climate, how it's changing, and how it is impacting the poles is an important gateway to understanding global warming. The International Polar Year (2007-2008) allows us an opportunity to focus on climate change at the poles and look at how it may impact the rest of the globe. The Climate Change Compendium compiles 40 outstanding inquiry-based lessons and activities from a number of sources for grades 3-12. Students learn about the greenhouse effect, natural and human climate records, albedos, feedback loops, and how these factors are affecting the Earth's polar regions. Teachers using the compendium are provided with background, image banks, extension exercises, and evaluation tools. The Climate Change Compendium is the third in the LASP compendium series, which includes Space Weather and Outer Planets.

  5. On the Distribution of Zeros and Poles of Rational Approximants on Intervals

    Directory of Open Access Journals (Sweden)

    V. V. Andrievskii

    2012-01-01

    Full Text Available The distribution of zeros and poles of best rational approximants is well understood for the functions (=||, >0. If ∈[−1,1] is not holomorphic on [−1,1], the distribution of the zeros of best rational approximants is governed by the equilibrium measure of [−1,1] under the additional assumption that the rational approximants are restricted to a bounded degree of the denominator. This phenomenon was discovered first for polynomial approximation. In this paper, we investigate the asymptotic distribution of zeros, respectively, -values, and poles of best real rational approximants of degree at most to a function ∈[−1,1] that is real-valued, but not holomorphic on [−1,1]. Generalizations to the lower half of the Walsh table are indicated.

  6. Neutron pole figures compared with magnetic preferred orientations of different rock types

    International Nuclear Information System (INIS)

    Hansen, Anke; Chadima, Martin; Cifelli, Francesca; Brokmeier, H.-G.Heinz-Guenter; Siemes, Heinrich

    2004-01-01

    Neutron diffraction is an excellent tool for pole figure measurement of rock samples. Due to high penetration depth of neutrons for most materials neutron diffraction represents an efficient tool to measure complete pole figures with reliable grain statistics even in coarse grained or inequi-granular materials. In the field of structural geology, the measurement of anisotropy of magnetic susceptibility is a standard technique to reveal the tectonic history of deformed rocks. The application of both techniques on still ongoing studies of Precambrian, Carboniferous and Quaternary rocks which are characterised by fundamental different tectonic evolutions and mineralogical compositions shows the wide field of relevance and importance of these methods in understanding tectonic processes in detail

  7. Parasitoids of the Southern Pine Beetle

    Science.gov (United States)

    C. Wayne Berisford

    2011-01-01

    Hymenopterous parasitoids make up a significant portion of the natural enemy complex associated with the southern pine beetle (SPB). Collectively, parasitoids can affect the growth of individual SPB infestations and area populations by reducing the survival rates of developing SPB larval/pupal broods. A substantial body of information on parasitoids has been...

  8. Body Disposal.

    Science.gov (United States)

    Sea, Jonghan; Beauregard, Eric

    2017-02-01

    This study explores the body disposal patterns in a sample of 54 Korean homicides that occurred between 2006 and 2012. Based on information collected by the police during their investigation, factors that could influence body disposal patterns were examined, such as homicide classification, intention, whether an accomplice was present, and offender mental disorder. Bivariate analyses showed that the majority of the victims who were disposed of were acquaintances of the offenders. Moreover, several offenders were more likely to dispose of the dead body "within hours" of killing the victim. Dead bodies were usually recovered in agricultural areas, forest/wooded areas, as well as residential areas. It was also noteworthy that, in 47 cases, the offender had knowledge of the geographic area where the body was dumped. In cases of "expressive" homicide, victims were more likely to be disposed of somewhere far away (e.g., over 40 km) from the crime scene, whereas "instrumental" homicide victims appeared to be disposed of somewhere closer (e.g., within 30 km) to the crime scene. Results are discussed in light of their practical implications for homicide investigations.

  9. Magnetic properties of a novel molecule-based ferrimagnet exhibiting multiple magnetic pole reversal

    International Nuclear Information System (INIS)

    Cador, Olivier; Vaz, Maria G.F.; Stumpf, Humberto O.; Mathoniere, Corine

    2001-01-01

    The magnetic properties of a new molecule-based ferrimagnet containing three different spin sources have been studied. Below the magnetic ordering temperature, the magnetic poles reverse once in a small external field as the temperature varies. At a higher field, they reverse twice at temperatures that depend on the measurement process. A double thermal hysteresis is observed in a constant field. These experimental results can be rationalized by a combination of the molecular-field theory (MFT) and magnetic anisotropy

  10. Single-pole recording head design for 100 Gbpsi perpendicular magnetic recording

    International Nuclear Information System (INIS)

    Yamakawa, Kiyoshi; Taguchi, Kaori; Ise, Kazuyuki; Honda, Naoki; Ouchi, Kazuhiro

    2001-01-01

    In developing a perpendicular recording head, writability, head induced erasure and head skew problem are major concerns for achieving 100 Gbpsi recording. Sufficient overwrite performance of the single-pole head with a trackwidth down to 0.26 μm and clear MFM images of 0.16 μm recorded signals were obtained. Furthermore, high stray field robustness was realized with a newly designed head accompanied by a high head efficiency

  11. Intrarenal Surgery vs Percutaneous Nephrolithotomy in the Management of Lower Pole Stones Greater than 2 cm.

    Science.gov (United States)

    Koyuncu, Hakan; Yencilek, Faruk; Kalkan, Mehmet; Bastug, Yavuz; Yencilek, Esin; Ozdemir, Ahmet Tunc

    2015-01-01

    To compare the efficacy of RIRS and PNL in lower pole stones ≥ 2 cm. Materials and and Methods: A total of 109 patients who underwent PNL or RIRS for solitary lower pole stone between April 2009 and December 2012, were retrospectively analyzed. Lower pole stone was diagnosed with CT scan. Stone size was assessed as the longest axis of the stone. All patients were informed about the advantages, disadvantages and probable complications of both PNL and RIRS before the selection of the procedure. Patients decided the surgery type by themselves without being under any influences and written informed consent was obtained from all patients prior to the surgery. Patients were divided into two groups according to the patients' preference of surgery type. Group 1 consisted of 77 patients who underwent PNL and Group 2 consisted of 32 patients treated with RIRS. Stone free statuses, postoperative complications, operative time and hospitalization time were compared in both groups. There was no statistical significance between the two groups in mean age, stone size, stone laterality, mean follow-up periods and mean operative times. In PNL group, stone-free rate was 96.1% at first session and 100% after the additional procedure. In Group 2, stone-free rate was 90.6% at the first procedure and 100% after the additional procedure. The final stone-free rates and operative times were similar in both groups. RIRS should be an effective treatment alternative to PNL in lower pole stones larger than 2 cm, especially in selected patients.

  12. Osteochondrosis of the Superior Pole of the Patella: Two Cases with Histologic Correlation

    Science.gov (United States)

    Tyler, Wakenda; McCarthy, Edward F

    2002-01-01

    Two cases of osteochondrosis of the superior pole of the patella are reported with histologic findings. Both patients were young girls; one had mild cerebral palsy. Sixteen cases of this disorder have been documented but without histologic study. The histologic features of these two cases showed osteonecrosis with reparative changes. These findings support that this entity is similar to other osteochondroses of the quadriceps mechanism: Osgood-Schlatter disease and Sinding-Larsen-Johansson disease. PMID:12180619

  13. Control of linear systems subject to time-domain constraints with polynomial pole placement and LMIs

    Czech Academy of Sciences Publication Activity Database

    Henrion, D.; Tarbouriech, S.; Kučera, Vladimír

    2005-01-01

    Roč. 50, č. 9 (2005), s. 1360-1364 ISSN 0018-9286 R&D Projects: GA MŠk 1M0567; GA ČR GA102/05/0011 Institutional research plan: CEZ:AV0Z10750506 Keywords : linear matrix inequality (LMI) * linear systems * pole placement * polynomials * time-domain constraints Subject RIV: BC - Control Systems Theory Impact factor: 2.159, year: 2005

  14. Neural correlates of auditory recognition memory in the primate dorsal temporal pole

    OpenAIRE

    Ng, Chi-Wing; Plakke, Bethany; Poremba, Amy

    2013-01-01

    Temporal pole (TP) cortex is associated with higher-order sensory perception and/or recognition memory, as human patients with damage in this region show impaired performance during some tasks requiring recognition memory (Olson et al. 2007). The underlying mechanisms of TP processing are largely based on examination of the visual nervous system in humans and monkeys, while little is known about neuronal activity patterns in the auditory portion of this region, dorsal TP (dTP; Poremba et al. ...

  15. Intrarenal Surgery vs Percutaneous Nephrolithotomy in the Management of Lower Pole Stones Greater than 2 cm

    Directory of Open Access Journals (Sweden)

    Hakan Koyuncu

    2015-04-01

    Full Text Available Purpose To compare the efficacy of RIRS and PNL in lower pole stones ≥2 cm. Materials and and Methods: A total of 109 patients who underwent PNL or RIRS for solitary lower pole stone between April 2009 and December 2012, were retrospectively analyzed. Lower pole stone was diagnosed with CT scan. Stone size was assessed as the longest axis of the stone. All patients were informed about the advantages, disadvantages and probable complications of both PNL and RIRS before the selection of the procedure. Patients decided the surgery type by themselves without being under any influences and written informed consent was obtained from all patients prior to the surgery. Patients were divided into two groups according to the patients’ preference of surgery type. Group 1 consisted of 77 patients who underwent PNL and Group 2 consisted of 32 patients treated with RIRS. Stone free statuses, postoperative complications, operative time and hospitalization time were compared in both groups. Results There was no statistical significance between the two groups in mean age, stone size, stone laterality, mean follow-up periods and mean operative times. In PNL group, stone-free rate was 96.1% at first session and 100% after the additional procedure. In Group 2, stone-free rate was 90.6% at the first procedure and 100% after the additional procedure. The final stone-free rates and operative times were similar in both groups. Conclusions RIRS should be an effective treatment alternative to PNL in lower pole stones larger than 2 cm, especially in selected patients.

  16. Right Renal Vein Aplasia Associated With Diverted Renal Venous Drainage Through Lower Pole

    International Nuclear Information System (INIS)

    Bozlar, Ugur; Ugurel, Mehmet Sahin; Bedir, Selahattin; Ors, Fatih; Coskun, Unsal; Aydur, Emin

    2008-01-01

    We report a unique anomalous renal venous drainage on a 25-year-old man who had congenital absence of the right renal vein and an aberrant venous drainage through the lower pole of the kidney into the inferior vena cava. To our knowledge, this anomaly has not been previously reported in the peer-reviewed literature. State-of-the-art imaging findings are presented.

  17. Eight piece quadrupole magnet, method for aligning quadrupole magent pole tips

    Energy Technology Data Exchange (ETDEWEB)

    Jaski, Mark S.; Liu, Jie; Donnelly, Aric T.; Downey, Joshua S.; Nudell, Jeremy J.; Jain, Animesh

    2018-01-30

    The invention provides an alternative to the standard 2-piece or 4-piece quadrupole. For example, an 8-piece and a 10-piece quadrupole are provided whereby the tips of each pole may be adjustable. Also provided is a method for producing a quadrupole using standard machining techniques but which results in a final tolerance accuracy of the resulting construct which is better than that obtained using standard machining techniques.

  18. Development Mode of Mid-small Cities in Northern Jiangsu Based on the Growth Pole Theory

    OpenAIRE

    He, Wei; Tang, Bu-long

    2012-01-01

    The development mode of mid-small cities in northern Jiangsu is analyzed on the Growth Pole theory. Depending on scales, endowment of resources, geographical positions, and industrial advantages of mil-small cities, we can divide the development mode of those mid-small cities within this context into five types: development through integration into big cities; independent development; resource-dependent development; single industry development; and mixed industry development.

  19. IceCube - the next generation neutrino telescope at the South Pole

    Energy Technology Data Exchange (ETDEWEB)

    Karle, A.; Ahrens, J.; Bahcall, J.N.; Bai, X.; Becka, T.; Becker, K.-H.; Besson, D.Z.; Berley, D.; Bernardini, E.; Bertrand, D.; Binon, F.; Biron, A.; Boeser, S.; Bohm, C.; Botner, O.; Bouhali, O.; Burgess, Th.; Castermans, T.; Chirkin, D.; Conrad, J.; Cooley, J.; Cowen, D.F.; Davour, A.; De Clercq, C.; DeYoung, T.; Desiati, P.; Dewulf, J.-P.; Dingus, B.; Ellsworth, R.; Evenson, P.A.; Fazely, A.R.; Feser, T.; Gaisser, T.K.; Gallagher, J.; Ganugapati, R.; Goldschmidt, A.; Goodman, J.; Hallgren, A.; Halzen, F.; Hanson, K.; Hardtke, R.; Hauschildt, T.; Hellwig, M.; Herquet, P.; Hill, G.C.; Hulth, P.O.; Hultgvist, K.; Hundertmark, S.; Jacobsen, J.; Japaridze, G.S.; Koepke, L.; Kowalski, M.; Lamoureux, J.I.; Leich, H.; Leuthold, M.; Lindahl, P.; Liubarsky, I.; Madson, J.; Marciniewski, P.; Matis, H.S.; McParland, C.P.; Minaeva, Y.; Miocinovic, P.; Morse, R.; Nahnhauer, R.; Neunhoeffer, T.; Niessen, P.; Nygren, D.R.; Ogelman, H.; Olbrechts, Ph.; Perez de los Heros, C.; Pohl, A.C.; Price, P.B.; Przybylski, G.T.; Rawlins, K.; Resconi, E.; Rhode, W.; Ribordy, M.; Richter, S.; Sander, H.-G.; Schmidt, T.; Schneider, D.; Seckel, D.; Solarz, M.; Sparke, L.; Spiczak, G.M.; Spiering, C.; Stanev, T.; Steele, D.; Steffen, P.; Stokstad, R.G.; Sudhoff, P.; Sulanke, K.-H.; Sullivan, G.W.; Sumners, T.; Taboada, I.; Thollander, L.; Tilav, S.; Walck, C.; Weinheimer, C.; Wiebusch, C.H.; Wiedemann, Ch.; Wischnewski, R.; Wissing, H.; Woschnagg, K.; Yoshida, Sh

    2003-04-01

    IceCube is a large neutrino telescope of the next generation to be constructed in the Antarctic Ice Sheet near theSouth Pole. We present the conceptual design and the sensitivity of the IceCube detector to predicted fluxes of neutrinos, both atmospheric and extra-terrestrial. A complete simulation of the detector design has been used to study the detector's capability to search for neutrinos from sources such as active galaxies, and gamma-ray bursts.

  20. Parametric Conversion in Micrometer and Submicrometer Structured Ferroelectric Crystals by Surface Poling

    Directory of Open Access Journals (Sweden)

    Alessandro C. Busacca

    2012-01-01

    Full Text Available We report on recent technological improvements concerning nonlinear patterning of lithium niobate and lithium tantalate in the micrometer and submicrometer scales using surface periodic poling for ferroelectric domain inversion. The fabricated samples were employed for frequency doubling via quasiphase-matching both in bulk and guided wave geometries, including forward and backward configurations and wavelength conversion in bands C and L. We also investigated short-period quasiperiodic samples with randomly distributed mark-to-space ratios.

  1. Nondestructive Evaluation of Young's Moduli of Full-Size wood Laminated Composite Poles

    Science.gov (United States)

    Cheng Piao; Todd F. Shube; Chung Y. Hse; R.C. Tang

    2004-01-01

    An exploratory study was conducted to evaluate the Young's moduli of wood laminated composite poles (LCP) by using a free transverse vibration method. Full-size LCP, 6.1 m long and 10.2 cm in diameter, were lab-fabricated with 9 and/or 12 southern yellow pine [SYP] strips of thickness, 1.9 cm, 2.9 cm and 3.8 cm. The frequency of free transverse vibration in a LCP...

  2. Poling effect of a charge-trapping layer in glass waveguides

    DEFF Research Database (Denmark)

    Ren, Yitao; Marckmann, Carl Johan; Jacobsen, Rune Shim

    2004-01-01

    Germanium-doped multi-layer waveguides containing a silicon oxy-nitride layer as a charge trapper are thermally poled in an air environment. Compared to the waveguides without the trapping layer, the induced linear electro-optic coefficient increases more than 20%. A comparable rise in the internal...... field is found. Our results demonstrate an optimization of the optical nonlinearity by shaping the built-in internal field with the charge-trapping layer....

  3. AMANDA and IceCube: neutrino astronomy at the south pole

    International Nuclear Information System (INIS)

    Taboada, Ignacio

    2006-01-01

    AMANDA is a high energy neutrino telescope consisting of 677 optical modules at 1.5-2 km depth in glacial ice at the south pole. We summarize AMANDA results for observation of atmospheric neutrinos and searches of extraterrestrial neutrinos from point sources, gamma ray bursts and diffuse fluxes. Upper limits at 90%CL are presented. The status of IceCube, the 1 km 3 successor to AMANDA currently under construction is presented

  4. AMANDA and IceCube: neutrino astronomy at the south pole

    Energy Technology Data Exchange (ETDEWEB)

    Taboada, Ignacio [Physics Department, University of California, Berkeley, CA 19720 (United States)

    2006-05-15

    AMANDA is a high energy neutrino telescope consisting of 677 optical modules at 1.5-2 km depth in glacial ice at the south pole. We summarize AMANDA results for observation of atmospheric neutrinos and searches of extraterrestrial neutrinos from point sources, gamma ray bursts and diffuse fluxes. Upper limits at 90%CL are presented. The status of IceCube, the 1 km{sup 3} successor to AMANDA currently under construction is presented.

  5. Transmission of a quantum state in a periodically poled nonlinear crystal

    OpenAIRE

    Singh, Ranjit

    2010-01-01

    Theoretical calculations on transmission of quantum states such as Schr\\"{o}dinger cat (SC) states are considered in a periodically poled nonlinear crystal (PPNC). Combinations of various initial states (SC, coherent (C),and vacuum (V)) of light waves at frequencies $\\omega_{e}$ and $3\\omega_{e}$ at the input of a PPNC are studied. It is shown that the transmission and interference between superposition of macroscopically distinguishable states can be achieved by using a PPNC. Visualization a...

  6. [Surgical treatment of inferior pole comminuted fractures of patella with new type tension band].

    Science.gov (United States)

    Sun, B; Zhang, Z S; Zhou, F; Tian, Y; Ji, H Q; Guo, Y; Lv, Y; Yang, Z W

    2015-04-18

    To study the effectiveness of inferior pole fracture of patella treating by the new tension band. From Dec. 2011 to Dec. 2013, 21 patients with inferior pole fracture of patella were treated with the new tension band which consisted of cannulated screw, titanium cable and shims. There were 21 patients[10 males, 11 females, the average age was 54 years(21 to 79)],of whom,all were "fell on knees". The average operation time was 89 min (57-197 min),the follow-up visits were done from 7-31 months (average 18 months), the bone healing time was from 8-12 weeks (average 10.5 weeks). The post operation assessment was done by Bostman score, from 20-30 (average 27),10 excellent,and 11 good. No complication occurred. The new tension band is the effective treatment for inferior pole fracture of patella. The internal fixation is reliable, it is simple to operate, and patients can take exercises as early as possible. Therefore, the new tension band has a better clinical value.

  7. Radial Force and Acoustic Noise Reduction for Switched Reluctance Motor with Hole inside Pole

    Science.gov (United States)

    Sanada, Masayuki; Nakata, Kazuaki; Morimoto, Shigeo; Takeda, Yoji; Yamai, Hiroyuki

    A switched reluctance motor (SRM) has a simple construction, for example double saliency, and the rotor contains no windings or magnets. However, the disadvantage of the acoustic noise associated with this motor cannot be ignored. The acoustic noise is generated primarily by the radial force acting in the radial direction. As the excitation current is cut off, the radial force is suddenly reduced to 0. The stator yoke repeats attraction and release motion as the commutation at the excitation winding is repeated. This attraction and release motion excites the resonance frequency of the stator. In this paper, a new rotor pole structure is proposed to improve the acoustic noise of the SRM. The FEM analysis of the torque and radial force indicates that the presence of a hole in the rotor pole reduces the radial force. In addition, the effect of the radial force reduction was found to depend only slightly on the height of the hole, whereas the dependence on the width of the hole was significant. Experimental findings confirmed that a rotor pole having a hole is an effective method by which to improve the noise.

  8. Temperament and living conditions: a comparison study of Poles and Koreans.

    Science.gov (United States)

    Zajenkowska, Anna; Zajenkowski, Marcin

    2013-02-01

    The present investigation tested the temperament traits of 319 Polish and 315 South Korean students according to the regulative theory of temperament. Poland and South Korea are two countries with a similar rate of economic growth but with distinct cultures; for instance, they differ in terms of individualism and masculinity dimensions as well as living conditions. This means that they have achieved the same goal with different resources but presumably also with different side effects. The results indicate that the Poles had higher levels of briskness, sensor sensibility and endurance, as well as lower levels of emotional reactivity and perseveration in comparison with South Koreans. The structure of one's temperament determines one's ability to meet environmental requirements and also how one deals with stressful conditions. According to previous empirical data, Poles' temperament profile can be characterized as being less prone to stress perception and therefore more advantageous. It is possible that Koreans, as they have a less adaptive temperament structure, experience higher levels of stress in a more stimulating environment than Poles. Copyright © 2012 John Wiley & Sons, Ltd.

  9. Evidence for Surface and Subsurface Ice Inside Micro Cold-Traps on Mercury's North Pole

    Science.gov (United States)

    Rubanenko, L.; Mazarico, E.; Neumann, G. A.; Paige, D. A.

    2017-01-01

    The small obliquity of Mercury causes topographic depressions located near its poles to cast persistent shadows. Many [1, 9, 15] have shown these permanently shadowed regions (PSRs) may trap water ice for geologic time periods inside cold-traps. More recently, direct evidence for the presence of water ice deposits inside craters was remotely sensed in RADAR [5] and visible imagery [3]. Albedo measurements (reflectence at 1064 nm) obtained by the MErcury Space ENviroment GEochemistry and Ranging Laser Altimeter (MLA) found unusually bright and dark areas next to Mercury's north pole [7]. Using a thermal illumination model, Paige et al. [8] found the bright deposits are correlated with surface cold-traps, and the dark deposits are correlated with subsurface cold-traps. They suggested these anomalous deposits were brought to the surface by comets and were processed by the magnetospheric radiation flux, removing hydrogen and mixing C-N-O-S atoms to form a variety of molecules which will darken with time. Here we use a thermal illumination model to find the link between the cold-trap area fraction of a rough surface and its albedo. Using this link and the measurements obtained by MESSENGER we derive a surface and a subsurface ice distribution map on Mercury's north pole below the MESSENGER spatial resolution, approximately 500 m. We find a large fraction of the polar ice on Mercury resides inside micro cold-traps (of scales 10 - 100 m) distributed along the inter-crater terrain.

  10. An electrical gearbox by means of pole variation for induction and superconducting disc motor

    International Nuclear Information System (INIS)

    Inacio, S; Inacio, D; Pina, J M; Valtchev, S; Neves, M V; Rodrigues, A L

    2008-01-01

    In this paper, a poly-phase disc motor innovative feeding and control strategy, based on a variable poles approach, and its application to a HTS disc motor, are presented. The stator windings may be electronically commutated to implement a 2, 4, 6 or 8 poles winding, thus changing the motor's torque/speed characteristics. The motor may be a conventional induction motor with a conductive disc rotor, or a new HTS disc motor, with conventional copper windings at its two iron semi-stators, and a HTS disc as a rotor. The conventional induction motor's operation principle is related with the induced electromotive forces in the conductive rotor. Its behaviour, characteristics (namely their torque/speed characteristics for different number of pole pairs) and modelling through Steinmetz and others theories are well known. The operation principle of the motor with HTS rotor, however, is rather different and is related with vortices' dynamics and pinning characteristics; this is a much more complex process than induction, and its modelling is quite complicated. In this paper, the operation was simulated through finite-elements commercial software, whereas superconductivity was simulated by the E-J power law. The Electromechanical performances of both motors where computed and are presented and compared. Considerations about the systems overall efficiency, including cryogenics, are also discussed

  11. Impact of Lower Pole Anatomy on Stone Clearance After Shock Wave Lithotripsy

    Directory of Open Access Journals (Sweden)

    Yung-Shun Juan

    2005-08-01

    Full Text Available This study retrospectively analyzed patients treated with shock wave ithotripsy (SWL for lower calyceal stones, to determine the influence of the lower pole anatomy and stone size in predicting the clearance of fragments. Between June 2000 and March 2002, we reviewed excretory urography (IVU of 59 patients with isolated lower pole stones treated with SWL. A total of 44 men and 15 women, with an age ranging between 23 and 78 years (mean, 55 years, were included in the study. The patients were divided into two groups, either a stone-free group or residual-stone group. After SWL, overall stone rate was 57.6%, and clearance for stones less than 10 mm in diameter was 64.5%, whereas clearance was 50% for stones between 10 and 20 mm in diameter. Intrarenal anatomy on IVU, such as infundibular width and infundibulopelvi-ureteric angle showed no significant difference between the stone-free and residual-stone groups. Our analysis showed that three significant variables were relevant to stone clearance: infundibular length, stone size and stone burden. We conclude that SWL is the best treatment for lower pole kidney stones 10 mm or less in diameter, showing lower complication and acceptable stone-free rates.

  12. Use and tolerability of a side pole static ankle foot orthosis in children with neurological disorders.

    Science.gov (United States)

    Delvert, Céline; Rippert, Pascal; Margirier, Françoise; Vadot, Jean-Pierre; Bérard, Carole; Poirot, Isabelle; Vuillerot, Carole

    2017-04-01

    Transverse-plane foot deformities are a frequently encountered issue in children with neurological disorders. They are the source of many symptoms, such as pain and walking difficulties, making their prevention very important. We aim to describe the use and tolerability of a side pole static ankle foot orthosis used to prevent transverse-plane foot deformities in children with neurologic disorders. Monocentric, retrospective, observational study. Medical data were collected from 103 children with transverse-plane foot deformities in one or both feet caused by a neurological impairment. All children were braced between 2001 and 2010. Unilateral orthosis was prescribed for 32 children and bilateral orthosis for 71. Transverse-plane foot deformities were varus in 66% of the cases and an equinus was associated in 59.2% of the cases. Mean age for the first prescription was 8.6 years. For the 23 patients present at the 4-year visit, 84.8% still wore the orthosis daily, and 64.7% wore the orthosis more than 6 h per day. The rate of permanent discontinuation of wearing the orthosis was 14.7%. The side pole static ankle foot orthosis is well tolerated with very few side effects, which promotes regular wearing and observance. Clinical relevance Side pole static ankle foot orthoses are well tolerated and can be safely used for children with foot abnormalities in the frontal plane that have a neurological pathology origin.

  13. A novel claw pole memory machine for wide-speed-range applications

    Science.gov (United States)

    Jian, Linni; Gong, Yu; Wei, Jin; Shi, Yujun; Shao, Ziyun; Ching, T. W.

    2015-05-01

    Memory machines with both high-power-density and wide-speed-range are becoming very attractive most recently. The purpose of this paper is to propose a novel type of memory machine, namely, claw pole memory machine. It engages an axially magnetized AlNiCo PM ring on the claw pole rotor to build the main magnetic flux in air-gap which is responsible for the electromechanical energy conversion. A magnetizing coil is equipped to online regulate the magnetization level of the permanent magnet ring, so as to achieve wide-speed-range operation. The operating principle is analyzed. The Preisach hysteresis model is combined with 3D finite element method to conduct performance assessment of the proposed claw pole memory machine. Calculation results demonstrate that the air-gap flux density can be readily adjusted by injecting DC pulse into the magnetizing coil, and the speed-range of the proposed machine can be extended as wide as six times of its base speed.

  14. Batwing versus Wise pattern mammoplasty for upper pole breast tumours: a detailed comparison of cosmetic outcome.

    Science.gov (United States)

    Hashem, Tarek; Farahat, Ahmed

    2017-03-14

    The aim of this study is to compare the results of batwing mammoplasty and Wise pattern mammoplasty in the surgical management of upper pole breast tumours. This is a retrospective observational study including 126 breast cancer patients who presented between 2009 and 2015 to the National Cancer Institute of Cairo University in Egypt. All patients were candidates for breast conservation, with upper pole tumours, which was defined as tumours between 3 and 9 o'clock. Patients were categorized into two groups. Group A (64) included patients who underwent inferiorly based therapeutic mammoplasty, while group B (62) was designated for patients who had batwing mammoplasty. The results of both groups were compared and analyzed. Wise pattern mammoplasty group had statistically significant higher complication rate. The overall aesthetic result of Wise pattern technique was superior to batwing mammoplasty. However, batwing mammoplasty showed a statistically significant higher rate of patient satisfaction. Both techniques are valid options for upper pole breast tumours. Wise pattern therapeutic mammoplasty remains aesthetically superior; however, batwing mammoplasty is an easy, simple technique with acceptable results to patients.

  15. Fundamental processes governing operation and degradation in state of the art P-OLEDs

    Science.gov (United States)

    Roberts, Matthew; Asada, Kohei; Cass, Michael; Coward, Chris; King, Simon; Lee, Andrew; Pintani, Martina; Ramon, Miguel; Foden, Clare

    2010-05-01

    We present a theoretical and experimental analysis of operation and degradation of model fluorescent blue bilayer polymer organic light emitting diodes (P-OLED). Optical and electrical simulations of bilayer P-OLEDs are used to highlight the key material and device parameters required for efficient recombination and outcoupling of excitons. Mobility data for a model interlayer material poly (9,9-dioctylfluorene-N-(4-(2-butyl)phenyl)-diphenylamine) (TFB) and a model fluorescent blue light emitting material poly-(9,9'- dioctylfluorene-co-bis-N, N'-(4-butylphenyl)-bis-N,N'- phenyl-1,4-phenylenediamine) (95:5 mol%) (F8-PFB random copoloymer), is shown to satisfy the key charge transport characteristics required to ensure exciton formation at the optimum location for efficient extraction of the light where μh (LEP) 90%) of the quenching sites produced. This highlights the importance of understanding these reversible phenomena in improving P-OLED lifetime and commercial adoption of the technology.

  16. GROWTH POLE DEVELOPMENT AND ‘METROPOLIZATION’ IN POST-SOCIALIST ROMANIA

    Directory of Open Access Journals (Sweden)

    J. BENEDEK

    2014-11-01

    Full Text Available Growth Pole Development and ‘Metropolization’ in Post-Socialist Romania. During the transition period the spatial planning institutions of Romania have undergone a constant and radical change from the communist system, based on state led industrialization and urbanization to a more flexible and democratic system. Among this changes are those induced by the creation and implementation of new forms of territorial governance, like the metropolitan areas, initiated in 2001. Since then the ‘metropolization’ process has advanced, more than 10 metropolitan areas being created, while many others have been proposed and are still in a pilot phase. One of the main features of this new spatial category is that it is based on major urban centres, which plays also the role of national growth poles. Therefore, we are asking in this paper for the linkages between the construction of metropolitan areas and the selection of growth poles, two questions which apparently differ, but they proved to be strongly interconnected in Romania.

  17. Design and analysis of a flux intensifying permanent magnet embedded salient pole wind generator

    Science.gov (United States)

    Guo, Yujing; Jin, Ping; Lin, Heyun; Yang, Hui; Lyu, Shukang

    2018-05-01

    This paper presents an improved flux intensifying permanent magnet embedded salient pole wind generator (FI-PMESPWG) with mirror symmetrical magnetizing directions permanent magnet (PM) for improving generator's performances. The air-gap flux densities, the output voltage, the cogging torque and the d- and q-axis inductances of FI-PMESPWG are all calculated and analyzed by using the finite element method (FEM). To highlight the advantages of the proposed FI-PMESPWG, an original permanent magnet embedded salient pole wind generator (PMESPWG) model is adopted for comparison under the same operating conditions. The calculating results show that the air-gap flux densities of FI-PMESPWG are intensified with the same magnet amounts because the PMs are set in a form of V shape in each pole. The difference between d-axis inductance and q-axis inductance of the proposed FI-PMESPWG is reduced. Thus, the output power of the proposed FI-PMESPWG reaches a higher value than that of the original PMESPWG at the same current phase angle. The cogging torque is diminished because the flux path is changed. All the analysis results indicate that the electromagnetic characteristics of the proposed FI-PMESPWG are significantly better than that of the original PMESPWG.

  18. Do Maximal Roller Skiing Speed and Double Poling Performance Predict Youth Cross-Country Skiing Performance?

    Directory of Open Access Journals (Sweden)

    Roland Stöggl, Erich Müller, Thomas Stöggl

    2017-09-01

    Full Text Available The aims of the current study were to analyze whether specific roller skiing tests and cycle length are determinants of youth cross-country (XC skiing performance, and to evaluate sex specific differences by applying non-invasive diagnostics. Forty-nine young XC skiers (33 boys; 13.8 ± 0.6 yrs and 16 girls; 13.4 ± 0.9 yrs performed roller skiing tests consisting of both shorter (50 m and longer durations (575 m. Test results were correlated with on snow XC skiing performance (PXC based on 3 skating and 3 classical distance competitions (3 to 6 km. The main findings of the current study were: 1 Anthropometrics and maturity status were related to boys’, but not to girls’ PXC; 2 Significant moderate to acceptable correlations between girls’ and boys’ short duration maximal roller skiing speed (double poling, V2 skating, leg skating and PXC were found; 3 Boys’ PXC was best predicted by double poling test performance on flat and uphill, while girls’ performance was mainly predicted by uphill double poling test performance; 4 When controlling for maturity offset, boys’ PXC was still highly associated with the roller skiing tests. The use of simple non-invasive roller skiing tests for determination of PXC represents practicable support for ski clubs, schools or skiing federations in the guidance and evaluation of young talent.

  19. Soft rot decay capabilities and interactions of fungi and bacteria from fumigated utility poles

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.J.K.; Worrall, J.J. (State Univ. of New York, Syracuse, NY (United States). Coll. of Environmental Science and Forestry)

    1992-11-01

    The objectives were to (1) identify microfungi and bacterial associates isolated from fumigated southern pine poles from EPRI project RP 1471-72, (2) study the soft-rot capabilities of predominant fungi, and (3) study interactions among microorganisms in relation to wood decay. Methods for identification followed standard techniques using morphological and physiological criteria. Soft-rot by microfungi alone and with bacteria was determined as weight loss and anatomical examination of wood blocks using light microscopy and limited electron microscopy. Acinetobacter calcoaceticus was the predominant bacterium. Twenty-one species of microfungi were identified including four new species. A book entitled IDENTIFICATION MANUAL FOR FUNGI FROM UTILITY POLES IN THE EASTERN UNITED STATES was published. An improved soft-rot test was devised. Fifty-one of 84 species (60%) of microfungi from poles tested were soft-rot positive; that is much greater than previously reported. Three types of anatomical damage of wood of pine or birch caused by soft-rot fungi were described. Interaction tests showed that, in some cases, there was a strong synergism between bacteria and fungi in causing weight loss, but results were inconsistent. Although soft rot is often most apparent under conditions of very high moisture, intermediate moisture levels appear to be optimal, as with basidiomycete decayers.

  20. Soft rot decay capabilities and interactions of fungi and bacteria from fumigated utility poles

    International Nuclear Information System (INIS)

    Wang, C.J.K.; Worrall, J.J.

    1992-11-01

    The objectives were to (1) identify microfungi and bacterial associates isolated from fumigated southern pine poles from EPRI project RP 1471-72, (2) study the soft-rot capabilities of predominant fungi, and (3) study interactions among microorganisms in relation to wood decay. Methods for identification followed standard techniques using morphological and physiological criteria. Soft-rot by microfungi alone and with bacteria was determined as weight loss and anatomical examination of wood blocks using light microscopy and limited electron microscopy. Acinetobacter calcoaceticus was the predominant bacterium. Twenty-one species of microfungi were identified including four new species. A book entitled IDENTIFICATION MANUAL FOR FUNGI FROM UTILITY POLES IN THE EASTERN UNITED STATES was published. An improved soft-rot test was devised. Fifty-one of 84 species (60%) of microfungi from poles tested were soft-rot positive; that is much greater than previously reported. Three types of anatomical damage of wood of pine or birch caused by soft-rot fungi were described. Interaction tests showed that, in some cases, there was a strong synergism between bacteria and fungi in causing weight loss, but results were inconsistent. Although soft rot is often most apparent under conditions of very high moisture, intermediate moisture levels appear to be optimal, as with basidiomycete decayers

  1. A capsular-based vascularized distal radius graft for proximal pole scaphoid pseudarthrosis.

    Science.gov (United States)

    Sotereanos, Dean G; Darlis, Nickolaos A; Dailiana, Zoe H; Sarris, Ioannis K; Malizos, Konstantinos N

    2006-04-01

    To evaluate the clinical results of the application of a capsular-based dorsal distal radius vascularized bone graft in scaphoid proximal pole nonunions. Thirteen patients with symptomatic nonunion at the proximal pole of the scaphoid (10 with avascular necrosis) were treated and reviewed retrospectively. The vascularized bone graft was harvested from the distal aspect of the dorsal radius and was attached to a wide distally based strip of the dorsal wrist capsule. It was inserted press-fit into a dorsal trough across the nonunion site after scaphoid fixation with a Herbert screw. After a mean follow-up period of 19 months 10 of the 13 nonunions (8 of the 10 with avascular necrosis) achieved solid bone union. No complications other than the 3 persistent nonunions occurred. Results of the use of a capsular-based vascularized bone graft from the distal radius for proximal pole scaphoid nonunions compare favorably with the results of pedicled or free vascularized grafts. It is a simple technique that eliminates the need for dissection of small-caliber pedicle or microsurgical anastomoses. No donor site morbidity was observed. Therapeutic, Level IV.

  2. Optimization Design and Performance Analysis of a PM Brushless Rotor Claw Pole Motor with FEM

    Directory of Open Access Journals (Sweden)

    Zhenyang Zhang

    2016-07-01

    Full Text Available A new type of permanent magnet (PM brushless claw pole motor (CPM with soft magnetic composite (SMC core is designed and analyzed in this paper. The PMs are mounted on the claw pole surface, and the three-phase stator windings are fed by variable-frequency three-phase AC currents. The advantages of the proposed CPM are that the slip rings on the rotor are cast off and it can achieve the efficiency improvement and higher power density. The effects of the claw-pole structure parameters, the air-gap length, and the PM thinner parameter of the proposed CPM on the output torque are investigated by using three-dimensional time-stepping finite element method (3D TS-FEM. The optimal rotor structure of the proposed CPM is obtained by using the response surface methodology (RSM and the particle swarm optimization (PSO method and the comparison of full-load performances of the proposed CPM with different material cores (SMC and silicon steel is analyzed.

  3. Robotic search for ices and hydrous minerals at the lunar poles using a combined X-ray diffraction and fluorescence instrument

    Science.gov (United States)

    Sarrazin, P.; Blake, D.; Bish, D.; Vaniman, D.; Chipera, S.; Collins, S. A.; Elliott, S. T.

    2002-12-01

    There is a growing body of evidence that points to the survival of water or hydrous minerals on the Moon and the potential for large aqueous reservoirs in shadowed craters at the lunar poles. CheMin, an XRD/XRF instrument that is currently under development, could provide a definitive test of whether the polar hydrogen signal measured by the recent Lunar Prospector mission is an indication of a significant water reservoir or merely reflects an anomalously rich accumulation of solar-wind hydrogen. Proposed enhancements of CheMin could be used in conjunction with a drilling system capable of penetrating the upper few tens of centimeters of the lunar regolith to search for ices or hydrous minerals. This advanced version of the CheMin instrument would be within the size, mass, and power constraints of Ariane 5 micromissions.

  4. Body Imaging

    Science.gov (United States)

    2001-01-01

    The high-tech art of digital signal processing (DSP) was pioneered at NASA's Jet Propulsion Laboratory (JPL) in the mid-1960s for use in the Apollo Lunar Landing Program. Designed to computer enhance pictures of the Moon, this technology became the basis for the Landsat Earth resources satellites and subsequently has been incorporated into a broad range of Earthbound medical and diagnostic tools. DSP is employed in advanced body imaging techniques including Computer-Aided Tomography, also known as CT and CATScan, and Magnetic Resonance Imaging (MRI). CT images are collected by irradiating a thin slice of the body with a fan-shaped x-ray beam from a number of directions around the body's perimeter. A tomographic (slice-like) picture is reconstructed from these multiple views by a computer. MRI employs a magnetic field and radio waves, rather than x-rays, to create images.

  5. Body parts

    Science.gov (United States)

    Ayiter, Elif

    2010-01-01

    In this project, the artist wishes to examine corporeality in the virtual realm, through the usage of the (non)-physical body of the avatar. An art installation created in the virtual world of Second Life, which is meant to be accessed with site specific avatars, will provide the creative platform whereby this investigation is undertaken. Thus, "body parts" seeks to challenge the residents of virtual environments into connecting with the virtual manifestations, i.e., avatars of others in an emotionally expressive/intimate manner.

  6. A Direct Algorithm for Pole Placement by State-derivative Feedback for Single-input Linear Systems

    Directory of Open Access Journals (Sweden)

    Taha H. S. Abdelaziz

    2003-01-01

    Full Text Available This paper deals with the direct solution of the pole placement problem for single-input linear systems using state-derivative feedback. This pole placement problem is always solvable for any controllable systems if all eigenvalues of the original system are nonzero. Then any arbitrary closed-loop poles can be placed in order to achieve the desired system performance. The solving procedure results in a formula similar to the Ackermann formula. Its derivation is based on the transformation of a linear single-input system into Frobenius canonical form by a special coordinate transformation, then solving the pole placement problem by state derivative feedback. Finally the solution is extended also for single-input time-varying control systems. The simulation results are included to show the effectiveness of the proposed approach.

  7. Celestial Pole Offsets: Conversion From (dX, dY) to (d(psi), d(epsilon). Version 3

    National Research Council Canada - National Science Library

    Kaplan, George H

    2005-01-01

    ...; defined more precisely what is meant by the celestial pole; and provided a new definition of UT1 in terms of an angle that directly measures the rotation of Earth in the celestial reference system...

  8. The efficacy of radiographic anatomical measurement methods in predicting success after extracorporeal shockwave lithotripsy for lower pole kidney stones.

    Science.gov (United States)

    Arpali, Emre; Altinel, Mert; Sargin, Semih Yasar

    2014-01-01

    To assess the impact of lower pole calyceal anatomy on clearace of lower pole stones after extracorporeal shockwave lithotripsy (ESWL) by means of a new and previously defined radiographic measurement method. Sixty-four patients with solitary radiopaque lower pole kidney stones were enrolled in the study. Infundibulopelvic angle (IPA), infundibulotransverse angle (ITA), infundibular lenght(IL), and infundibular width (IW) were measured on the intravenous urographies which were taken before the procedure. 48 of 64 patients (75%) were stone-free after a follow-up period of 3 months. The IPA,ITA,IL and IW were determined as statistically significant factors, while age,gender and stone area were found to have no impact on clearance. By the help of radiographic measurement methods related to lower pole kidney anatomy, appropriate patient selection and increment in success after ESWL may be achieved.

  9. Black Performance and Body Dramaturgy in the Batuque

    Directory of Open Access Journals (Sweden)

    Renata de Lima Silva

    2017-05-01

    Full Text Available The expansion of what can be considered as a scene, show or performance is a major contribution of Ethnoscenology and Performance Studies to the field of the Performing Arts, breaking borders that are based on the colonialism of knowledge, which radically separated art from grassroots culture, putting creation and tradition in different poles. This shift of paradigm opens the possibility of thinking the body dramaturgy of the African-Brazilian rituals as a construct of the relationship between body and ancestry. It is in this perspective that this paper presents a discussion on the black performance of batuque, more specifically the Suça, from Natividade (TO/Brazil.

  10. Bog bodies

    DEFF Research Database (Denmark)

    Lynnerup, Niels

    2015-01-01

    In northern Europe during the Iron Age, many corpses were deposited in bogs. The cold, wet and anaerobic environment leads in many cases to the preservation of soft tissues, so that the bodies, when found and excavated several thousand years later, are remarkably intact. Since the 19th century th...

  11. BODY CONDITION

    African Journals Online (AJOL)

    Andrew Taylor

    Table 1 Seasonal variation in body and kidney weight of adult mountain reedbuck culled at Sterkfontein. Values are ..... This leads to a decrease in nutritional quality of grazing for mountain reedbuck and a loss of condition. .... This would decrease the chances of starvation of those animals left, and allow them to build up ...

  12. Sacralising Bodies

    DEFF Research Database (Denmark)

    Kaur, Ravinder

    2010-01-01

    -sacrifice became central to the mass mobilisation against the monarchy. Once the revolutionary government came into existence, this sacred tradition was regulated to create ‘martyrs’ as a fixed category, in order to consolidate the legacy of the revolution. In this political theatre, the dead body is a site...

  13. Characterisation of Q and T steel pole shoes manufactured by sand casting; Charakterisierung mit Sandguss hergestellter Polschuhe aus verguetetem Stahl

    Energy Technology Data Exchange (ETDEWEB)

    Asensio-Lozano, J.; Alvarez-Antolin, J.F. [Oviedo Univ. (Spain). Dept. of Materials Science and Metallurgical Engineering; Panta-Mesones, J.T. [National Univ. of Trujillo, La Libertad (Peru). Faculty of Mines, Metallurgy and Materials; Vander-Voort, G.F. [Buehler Ltd., Lake Bluff, IL (United States)

    2008-04-15

    This paper presents a study of the microstructural and mechanical characterization of the GS 35 CrMoV 10 4 alloy employed in the manufacture of sand-cast pole shoes for 4-pole synchronous electric power generators working at a frequency of 60 Hz. In addition, the most appropriate treatment for ensuring compliance with the technical specifications defined in DIN Standard No. 1.7755 has been designed. (orig.)

  14. Detection and classification of pole-like road objects from mobile LiDAR data in motorway environment

    Science.gov (United States)

    Yan, Li; Li, Zan; Liu, Hua; Tan, Junxiang; Zhao, Sainan; Chen, Changjun

    2017-12-01

    Mobile LiDAR Scanning (MLS) can collect 3-dimensional (3D) road and road-related geospatial information accurately and efficiently. Pole-like objects located in road environment are important street furniture and they are necessary information in road inventory and road mapping. The automatic detection and classification of pole-like road objects from mobile LiDAR data can greatly reduce the cost and improve the efficiency. This paper provides a complete workflow for the detection and classification of pole-like road objects from mobile LiDAR data in motorway environment. The major workflow includes three steps: data preprocessing, pole-like road objects detection and pole-like road objects classification. In data preprocessing step, ground points are removed by an automatic ground filtering algorithm, and then off-ground points are clustered into segments and the overlapped segments containing pole-like road objects are further separated through an iterative min-cut based segmentation approach. In detection step, filters utilizing both prior and shape information are used to detect the target objects. In classification step, features of objects are calculated and classified using Random Forest classifier. Our method was tested on two datasets scanned in motorway environment, and the results showed that the Matthews correlation coefficient of the two datasets in detection step was 93.7% and 95.9% respectively and the overall accuracy of the two datasets in classification step was 96.5% and 97.9% respectively.

  15. Prevalence of pain on palpation of the inferior pole of the patella among patients with complaints of knee pain

    Directory of Open Access Journals (Sweden)

    Leonardo Addêo Ramos

    2009-03-01

    Full Text Available CONTEXT AND OBJECTIVE: Patellar tendinopathy is a common condition in sports. It may occur at any location of the patellar tendon, but the most commonly affected area is the inferior pole of the patella. Among various diagnostic tests, the one most used is palpation of the inferior pole of the patella. The aim of this study was to investigate the prevalence of pain complaints among individuals with pathological knee conditions and to evaluate palpation of the inferior pole of the patella as a diagnostic test for patellar tendinopathy. METHODS: Palpation of the patellar tendon was performed on 318 individuals who presented with knee-related complaints. Palpation was performed with the individual in the supine position and the knee extended. The age, gender, physical activity and labor activity of each individual were recorded at the time the symptoms appeared; the diagnosis was also recorded. RESULTS: Of the total number of individuals evaluated, 124 (39% felt pain on palpation of the inferior pole of the patella. Of these, only 40 (32.3% received a diagnosis of patellar tendinopathy. We did not observe any difference with respect to gender and age distribution. When evaluating daily physical activity levels, however, we observed that individuals with pain on palpation of the inferior pole of the patella experienced more intense physical activity. CONCLUSIONS: Palpation of the inferior pole of the patella is a diagnostic procedure with high sensitivity and moderate specificity for diagnosing patellar tendinopathy, especially among individuals who perform activities with high functional demands.

  16. Body Weight and Body Image

    Directory of Open Access Journals (Sweden)

    McFarlane Traci

    2004-08-01

    Full Text Available Abstract Health Issue Body weight is of physical and psychological importance to Canadian women; it is associated with health status, physical activity, body image, and self-esteem. Although the problems associated with overweight and obesity are indeed serious, there are also problems connected to being underweight. Weight prejudice and the dieting industry intensify body image concerns for Canadian women and can have a major negative impact on self-esteem. Key Findings Women have lower BMIs than men, a lower incidence of being overweight and a higher incidence of being underweight. However, women across all weight categories are more dissatisfied with their bodies. Sixty percent of women are inactive, and women with a BMI of 27 or higher are more likely to be inactive than women with lower BMIs. The data show that women are aware of the health benefits of exercise, but there is a gap between knowledge and practice. When asked about barriers to health improvement, 39.7% of women cited lack of time and 39.2% lack of willpower. Data Gaps and Recommendations Weight prejudice must be made unacceptable and positive body image should be encouraged and diversity valued. Health policies should encourage healthy eating and healthy activity. Health curricula for young students should include information about healthy eating, active lifestyle, and self-esteem. Physical activities that mothers can participate in with their families should be encouraged. Research should be funded to elucidate the most effective methods of getting women to become and remain physically active without focusing on appearance.

  17. Materials processing, pulsed field magnetization and field-pole application to propulsion motors on Gd123 bulk superconductors

    International Nuclear Information System (INIS)

    Izumi, M; Xu, C; Xu, Y; Morita, E; Kimura, Y; Hu, A; Ichihara, M; Murakami, M; Sakai, N; Hirabayashi, I; Sugimoto, H; Miki, M

    2008-01-01

    Gd123 bulk superconductor is one of the promising magnet materials. We studied the materials processing to grow high performance magnet with a doping of nano-sized metal oxides such as ZrO 2 as a candidature of pinning centre. The enhancement of the critical current density was obtained. Growth of nano-sized particles of Gd211 in addition to BaZrO 3 were observed by TEM. The formation of nano-sized particles appears a key to improve the integrated flux trapped inside the bulks and the TEM reveals an intriguing effect of the addition to the microstructure of bulk materials. Magnetization process is crucial especially for an extended machinery. Pulsed field magnetization was applied to the field-pole bulk on the rotor disk of the tested synchronous motor. The trapped flux density of 1.3 T for Gd123 bulk sample and of 60 mm diameter was reached in the limited dimension of the tested motor by a step cooling method down to 38 K with a closed-cycle condensed neon. The pulsed magnetic field was applied with a new type of split-armature coil. A large bulk of 140 mm diameter has also shown a potential flux trapping superior to other smaller specimens. The bulk magnet provides a strong magnetic field around the bulk body itself with high current density relative to a coil winding. A comparative drawing of a 'torque density' of a variety of motors which is defined as the torque divided by the volume of the motor indicates a potential advantage of bulk motor as a super permanent magnet motor

  18. Separate vertical wiring for the fixation of comminuted fractures of the inferior pole of the patella.

    Science.gov (United States)

    Song, Hyung Keun; Yoo, Je Hyun; Byun, Young Soo; Yang, Kyu Hyun

    2014-05-01

    Among patients over 50 years of age, separate vertical wiring alone may be insufficient for fixation of fractures of the inferior pole of the patella. Therefore, mechanical and clinical studies were performed in patients over the age of 50 to test the strength of augmentation of separate vertical wiring with cerclage wire (i.e., combined technique). Multiple osteotomies were performed to create four-part fractures in the inferior poles of eight pairs of cadaveric patellae. One patella from each pair was fixed with the separate wiring technique, while the other patella was fixed with a combined technique. The ultimate load to failure and stiffness of the fixation were subsequently measured. In a clinical study of 21 patients (average age of 64 years), comminuted fractures of the inferior pole of the patellae were treated using the combined technique. Operative parameters were recorded from which post-operative outcomes were evaluated. For cadaveric patellae, whose mean age was 69 years, the mean ultimate loads to failure for the separate vertical wiring technique and the combined technique were 216.4±72.4 N and 324.9±50.6 N, respectively (p=0.012). The mean stiffness for the separate vertical wiring technique and the combined technique was 241.1±68.5 N/mm and 340.8±45.3 N/mm, respectively (p=0.012). In the clinical study, the mean clinical score at final follow-up was 28.1 points. Augmentation of separate vertical wiring with cerclage wire provides enough strength for protected early exercise of the knee joint and uneventful healing.

  19. Topography of the Lunar Poles and Application to Geodesy with the Lunar Reconnaissance Orbiter

    Science.gov (United States)

    Mazarico, Erwan; Neumann, Gregory A.; Rowlands, David D.; Smith, David E.; Zuber, Maria T.

    2012-01-01

    The Lunar Orbiter Laser Altimeter (LOLA) [1] onboard the Lunar Reconnaissance Orbiter (LRO) [2] has been operating continuously since July 2009 [3], accumulating approx.5.4 billion measurements from 2 billion on-orbit laser shots. LRO s near-polar orbit results in very high data density in the immediate vicinity of the lunar poles, which are each sampled every 2h. With more than 10,000 orbits, high-resolution maps can be constructed [4] and studied [5]. However, this requires careful processing of the raw data, as subtle errors in the spacecraft position and pointing can lead to visible artifacts in the final map. In other locations on the Moon, ground tracks are subparallel and longitudinal separations are typically a few hundred meters. Near the poles, the track intersection angles can be large and the inter-track spacing is small (above 80 latitude, the effective resolution is better than 50m). Precision Orbit Determination (POD) of the LRO spacecraft [6] was performed to satisfy the LOLA and LRO mission requirements, which lead to a significant improvement in the orbit position knowledge over the short-release navigation products. However, with pixel resolutions of 10 to 25 meters, artifacts due to orbit reconstruction still exist. Here, we show how the complete LOLA dataset at both poles can be adjusted geometrically to produce a high-accuracy, high-resolution maps with minimal track artifacts. We also describe how those maps can then feedback to the POD work, by providing topographic base maps with which individual LOLA altimetric measurements can be contributing to orbit changes. These direct altimetry constraints improve accuracy and can be used more simply than the altimetric crossovers [6].

  20. Experimental model of upper-pole nephrectomy using human tridimensional endocasts: analysis of vascular injuries.

    Science.gov (United States)

    Favorito, Luciano Alves; Brito, Djair Aquino; Sampaio, Francisco J B

    2011-01-01

    The aim of the study is to establish an experimental model for upper-pole nephrectomy using tridimensional endocasts of human kidneys. We studied 104 kidneys from 52 adults. The ureters, veins, and arteries were dissected and injected with yellow, blue, and red polyester resin, respectively. While this resin was still in the gel state, we performed upper-pole guillotine sections at various distances from the hilar zone, thereby dividing our sample in four groups: A. Hilar zone: 22 kidneys (10 with vein and ureter injection); B. 0.5 cm from the hilar zone, 32 kidneys (9 with vein and ureter); C. 1.0 cm from the hilar zone, 24 kidneys (11 with vein and ureter); and D. 1.5 cm from the hilar zone, 26 kidneys (6 with vein and ureter). We also determined the mean distance from the retropelvic artery to the section plane. Sections performed at the hilar region and at 0.5 cm from hilar region had an alarming rate of injuries to the retropelvic artery and vein, upper segmental artery, and upper venous trunk. In both groups, the distance between the section plane and retropelvic artery was a mean less than 1.0 cm. Sections performed at 1.0 cm and at 1.5 cm from the hilar region had a significantly lower injury rate, with mean distance between section plane and retropelvic artery more than 1.0 cm. Upper-pole nephrectomies performed at less than 1.0 cm from the hilar zone had a significantly high incidence of injuries in larger arteries. Nephrectomies at this level should therefore be avoided or performed with maximum care.