WorldWideScience

Sample records for points pkt size

  1. KAJIAN EKONOMI KONSTRUKSI PERKERASAN LENTUR DAN KONSTRUKSI PERKERASAN KAKU (STUDI KASUS JALAN RAYA PKT.EBL-02 TOHPATI - KUSAMBA

    Directory of Open Access Journals (Sweden)

    Hevie Tri Hary Astuti

    2014-02-01

    Full Text Available This study takes the case PKT. EBL highway Tohpati – 02 – Kusamba.The purpose of this study was to conduct economic studies flexible pavement and rigid pavement based on primary data and secondary data obtained from government agencies, the analysis in this study using the methode of costs and benefits. For flexible pavement; assuming traffic growth factor of 3.66%, inflation at 5.68% and the interest rate of 15% / year, 25% / year and 30% / year, and the fluctuating value of IRI. The results obtained for the 15% interest rate per year is NPV = Rp. 98,517,603,656, -, BCR = 1.42; interest rate to 25% per year is NPV = Rp. (65,520,977,844, -, BCR = 0.96; interest rate to 30% per year is NPV = Rp. (69,846,272,752, -, BCR = 0.51, moderate IRR = 24.38%. It can be concluded that the Highway Pavement Bending PKT.EBL-02 Tohpati - Kusamba is economically feasible at the rate of 15% per year with an IRR above. For Rigid Pavement; assuming traffic growth factor of 3.66%, inflation at 5.68% and the interest rate of 15% / year, 25% / year and 30% / year, and the value of IRI stable. The results obtained for the 15% interest rate per year is NPV = Rp. 159 515 604 651, -, BCR = 2.20; interest rate to 25% per year is NPV = Rp. 2068846698, -, BCR = 1.01; interest rate to 30% per year is NPV = Rp. (65,250,533,141, -, BCR = 0.51, moderate IRR = 25.15%. It can be concluded that the Rigid Pavement on Highway-02 PKT.EBL Tohpati - Kusamba is economically feasible at the rate of 15% per annum and 25% per year with an IRR above. In the concluding remarks of the above where rigid pavement IRR greater than the flexible pavement, the results of the economic analysis of this study is that the rigid pavement is more profitable than the flexible pavement.

  2. Size structure, not metabolic scaling rules, determines fisheries reference points

    DEFF Research Database (Denmark)

    Andersen, Ken Haste; Beyer, Jan

    2015-01-01

    these empirical relations is lacking. Here, we combine life-history invariants, metabolic scaling and size-spectrum theory to develop a general size- and trait-based theory for demography and recruitment of exploited fish stocks. Important concepts are physiological or metabolic scaled mortalities and flux...... that even though small species have a higher productivity than large species their resilience towards fishing is lower than expected from metabolic scaling rules. Further, we show that the fishing mortality leading to maximum yield per recruit is an ill-suited reference point. The theory can be used......Impact assessments of fishing on a stock require parameterization of vital rates: growth, mortality and recruitment. For 'data-poor' stocks, vital rates may be estimated from empirical size-based relationships or from life-history invariants. However, a theoretical framework to synthesize...

  3. Fundamental size limitations of micro four-point probes

    DEFF Research Database (Denmark)

    Ansbæk, Thor; Petersen, Dirch Hjorth; Hansen, Ole

    2009-01-01

    The continued down-scaling of integrated circuits and magnetic tunnel junctions (MTJ) for hard disc read heads presents a challenge to current metrology technology. The four-point probes (4PP), currently used for sheet resistance characterization in these applications, therefore must be down......-scaled as well in order to correctly characterize the extremely thin films used. This presents a four-point probe design and fabrication challenge. We analyze the fundamental limitation on down-scaling of a generic micro four-point probe (M4PP) in a comprehensive study, where mechanical, thermal, and electrical...

  4. Point source atom interferometry with a cloud of finite size

    Energy Technology Data Exchange (ETDEWEB)

    Hoth, Gregory W., E-mail: gregory.hoth@nist.gov; Pelle, Bruno; Riedl, Stefan; Kitching, John; Donley, Elizabeth A. [National Institute of Standards and Technology, Boulder, Colorado 80305 (United States)

    2016-08-15

    We demonstrate a two axis gyroscope by the use of light pulse atom interferometry with an expanding cloud of atoms in the regime where the cloud has expanded by 1.1–5 times its initial size during the interrogation. Rotations are measured by analyzing spatial fringe patterns in the atom population obtained by imaging the final cloud. The fringes arise from a correlation between an atom's initial velocity and its final position. This correlation is naturally created by the expansion of the cloud, but it also depends on the initial atomic distribution. We show that the frequency and contrast of these spatial fringes depend on the details of the initial distribution and develop an analytical model to explain this dependence. We also discuss several challenges that must be overcome to realize a high-performance gyroscope with this technique.

  5. Analysis of point source size on measurement accuracy of lateral point-spread function of confocal Raman microscopy

    Science.gov (United States)

    Fu, Shihang; Zhang, Li; Hu, Yao; Ding, Xiang

    2018-01-01

    Confocal Raman Microscopy (CRM) has matured to become one of the most powerful instruments in analytical science because of its molecular sensitivity and high spatial resolution. Compared with conventional Raman Microscopy, CRM can perform three dimensions mapping of tiny samples and has the advantage of high spatial resolution thanking to the unique pinhole. With the wide application of the instrument, there is a growing requirement for the evaluation of the imaging performance of the system. Point-spread function (PSF) is an important approach to the evaluation of imaging capability of an optical instrument. Among a variety of measurement methods of PSF, the point source method has been widely used because it is easy to operate and the measurement results are approximate to the true PSF. In the point source method, the point source size has a significant impact on the final measurement accuracy. In this paper, the influence of the point source sizes on the measurement accuracy of PSF is analyzed and verified experimentally. A theoretical model of the lateral PSF for CRM is established and the effect of point source size on full-width at half maximum of lateral PSF is simulated. For long-term preservation and measurement convenience, PSF measurement phantom using polydimethylsiloxane resin, doped with different sizes of polystyrene microspheres is designed. The PSF of CRM with different sizes of microspheres are measured and the results are compared with the simulation results. The results provide a guide for measuring the PSF of the CRM.

  6. Portion size: a qualitative study of consumers' attitudes toward point-of-purchase interventions aimed at portion size.

    Science.gov (United States)

    Vermeer, Willemijn M; Steenhuis, Ingrid H M; Seidell, Jacob C

    2010-02-01

    This qualitative study assessed consumers' opinions of food portion sizes and their attitudes toward portion-size interventions located in various point-of-purchase settings targeting overweight and obese people. Eight semi-structured focus group discussions were conducted with 49 participants. Constructs from the diffusion of innovations theory were included in the interview guide. Each focus group was recorded and transcribed verbatim. Data were coded and analyzed with Atlas.ti 5.2 using the framework approach. Results showed that many participants thought that portion sizes of various products have increased during the past decades and are larger than acceptable. The majority also indicated that value for money is important when purchasing and that large portion sizes offer more value for money than small portion sizes. Furthermore, many experienced difficulties with self-regulating the consumption of large portion sizes. Among the portion-size interventions that were discussed, participants had most positive attitudes toward a larger availability of portion sizes and pricing strategies, followed by serving-size labeling. In general, reducing package serving sizes as an intervention strategy to control food intake met resistance. The study concludes that consumers consider interventions consisting of a larger variety of available portion sizes, pricing strategies and serving-size labeling as most acceptable to implement.

  7. Meta-Analysis of Effect Sizes Reported at Multiple Time Points Using General Linear Mixed Model

    Science.gov (United States)

    Musekiwa, Alfred; Manda, Samuel O. M.; Mwambi, Henry G.; Chen, Ding-Geng

    2016-01-01

    Meta-analysis of longitudinal studies combines effect sizes measured at pre-determined time points. The most common approach involves performing separate univariate meta-analyses at individual time points. This simplistic approach ignores dependence between longitudinal effect sizes, which might result in less precise parameter estimates. In this paper, we show how to conduct a meta-analysis of longitudinal effect sizes where we contrast different covariance structures for dependence between effect sizes, both within and between studies. We propose new combinations of covariance structures for the dependence between effect size and utilize a practical example involving meta-analysis of 17 trials comparing postoperative treatments for a type of cancer, where survival is measured at 6, 12, 18 and 24 months post randomization. Although the results from this particular data set show the benefit of accounting for within-study serial correlation between effect sizes, simulations are required to confirm these results. PMID:27798661

  8. The effects of size, clutter, and complexity on vanishing-point distances in visual imagery.

    Science.gov (United States)

    Hubbard, T L; Baird, J C

    1993-01-01

    The portrayal of vanishing-point distances in visual imagery was examined in six experiments. In all experiments, subjects formed visual images of squares, and the squares were to be oriented orthogonally to subjects' line of sight. The squares differed in their level of surface complexity, and were either undivided, divided into 4 equally sized smaller squares, or divided into 16 equally sized smaller squares. Squares also differed in stated referent size, and ranged from 3 in. to 128 ft along each side. After subjects had formed an image of a specified square, they transformed their image so that the square was portrayed to move away from them. Eventually, the imaged square was portrayed to be so far away that if it were any further away, it could not be identified. Subjects estimated the distance to the square that was portrayed in their image at that time, the vanishing-point distance, and the relationship between stated referent size and imaged vanishing-point distance was best described by a power function with an exponent less than 1. In general, there were trends for exponents (slopes on log axes) to increase slightly and for multiplicative constants (y intercepts on log axes) to decrease as surface complexity increased. No differences in exponents or in multiplicative constants were found when the vanishing-point was approached from either subthreshold or suprathreshold directions. When clutter in the form of additional imaged objects located to either side of the primary imaged object was added to the image, the exponent of the vanishing-point function increased slightly and the multiplicative constant decreased. The success of a power function (and the failure of the size-distance invariance hypothesis) in describing the vanishing-point distance function calls into question the notions (a) that a constant grain size exists in the imaginal visual field at a given location and (b) that grain size specifies a lower limit in the storage of information in

  9. Three-point correlation functions of giant magnons with finite size

    International Nuclear Information System (INIS)

    Ahn, Changrim; Bozhilov, Plamen

    2011-01-01

    We compute holographic three-point correlation functions or structure constants of a zero-momentum dilaton operator and two (dyonic) giant magnon string states with a finite-size length in the semiclassical approximation. We show that the semiclassical structure constants match exactly with the three-point functions between two su(2) magnon single trace operators with finite size and the Lagrangian in the large 't Hooft coupling constant limit. A special limit J>>√(λ) of our result is compared with the relevant result based on the Luescher corrections.

  10. Size matters: point pattern analysis biases the estimation of spatial properties of stomata distribution.

    Science.gov (United States)

    Naulin, Paulette I; Valenzuela, Gerardo; Estay, Sergio A

    2017-03-01

    Stomata distribution is an example of biological patterning. Formal methods used to study stomata patterning are generally based on point-pattern analysis, which assumes that stomata are points and ignores the constraints imposed by size on the placement of neighbors. The inclusion of size in the analysis requires the use of a null model based on finite-size object geometry. In this study, we compare the results obtained by analyzing samples from several species using point and disc null models. The results show that depending on the null model used, there was a 20% reduction in the number of samples classified as uniform; these results suggest that stomata patterning is not as general as currently reported. Some samples changed drastically from being classified as uniform to being classified as clustered. In samples of Arabidopsis thaliana, only the disc model identified clustering at high densities of stomata. This reinforces the importance of selecting an appropriate null model to avoid incorrect inferences about underlying biological mechanisms. Based on the results gathered here, we encourage researchers to abandon point-pattern analysis when studying stomata patterning; more realistic conclusions can be drawn from finite-size object analysis. © 2016 The Authors. New Phytologist © 2016 New Phytologist Trust.

  11. A Maximum Power Point Tracking Method Combined with Constant Voltage Tracking & Variable Step-Size Perturbation

    Directory of Open Access Journals (Sweden)

    Kaisheng Zhang

    2014-07-01

    Full Text Available According to the characteristics of photovoltaic cell output power curve, this paper analyzed and explained the principle of Maximum Power Point Tracking (MPPT and both advantages and disadvantages of constant voltage tracking method & perturbation observation method. Further, in combination with the advantages of existing maximum power tracking methods, this paper comes up with an improved tracking method which is recognized as maximum power point tracking combined with constant voltage tracking method & variable step-size perturbation observation method. The Simulink simulation results have proven this enhanced tracking method has a better performance in System response and steady state characteristics.

  12. Influence of the size of facets on point focus solar concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Riveros-Rosas, David [Instituto de Geofisica, Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, Col. Copilco, Coyoacan, CP 04510 DF (Mexico); Sanchez-Gonzalez, Marcelino [Centro Nacional de Energias Renovables, c/Somera 7-9, CP 28026 Madrid (Spain); Arancibia-Bulnes, Camilo A.; Estrada, Claudio A. [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico, Priv. Xochicalco s/n, Morelos (Mexico)

    2011-03-15

    It is a common practice in the development of point focus solar concentrators to use multiple identical reflecting facets, as a practical and economic alternative for the design and construction of large systems. This kind of systems behaves in a different manner than continuous paraboloidal concentrators. A theoretical study is carried out to understand the effect of the size of facets and of their optical errors in multiple facet point focus solar concentrating systems. For this purpose, a ray tracing program was developed based on the convolution technique, in which the brightness distribution of the sun and the optical errors of the reflecting surfaces are considered. The study shows that both the peak of concentration and the optimal focal distance of the system strongly depend on the size of the facets, and on their optical errors. These results are useful to help concentrator developers to have a better understanding of the relationship between manufacturing design restrictions and final optical behavior. (author)

  13. A Maximum Power Point Tracker with Automatic Step Size Tuning Scheme for Photovoltaic Systems

    Directory of Open Access Journals (Sweden)

    Kuei-Hsiang Chao

    2012-01-01

    Full Text Available The purpose of this paper is to study on a novel maximum power point tracking (MPPT method for photovoltaic (PV systems. First, the simulation environment for PV systems is constructed by using PSIM software package. A 516 W PV system established with Kyocera KC40T photovoltaic modules is used as an example to finish the simulation of the proposed MPPT method. When using incremental conductance (INC MPPT method, it usually should consider the tradeoff between the dynamic response and the steady-state oscillation, whereas the proposed modified incremental conductance method based on extension theory can automatically adjust the step size to track the maximum power point (MPP of PV array and effectively improve the dynamic response and steady-state performance of the PV systems, simultaneously. Some simulation and experimental results are made to verify that the proposed extension maximum power point tracking method can provide a good dynamic response and steady-state performance for a photovoltaic power generation system.

  14. Finite size scaling of the Higgs-Yukawa model near the Gaussian fixed point

    Energy Technology Data Exchange (ETDEWEB)

    Chu, David Y.J.; Lin, C.J. David [National Chiao-Tung Univ., Hsinchu, Taiwan (China); Jansen, Karl [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany). John von Neumann-Inst. fuer Computing NIC; Knippschild, Bastian [HISKP, Bonn (Germany); Nagy, Attila [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany). John von Neumann-Inst. fuer Computing NIC; Humboldt-Univ. Berlin (Germany)

    2016-12-15

    We study the scaling properties of Higgs-Yukawa models. Using the technique of Finite-Size Scaling, we are able to derive scaling functions that describe the observables of the model in the vicinity of a Gaussian fixed point. A feasibility study of our strategy is performed for the pure scalar theory in the weak-coupling regime. Choosing the on-shell renormalisation scheme gives us an advantage to fit the scaling functions against lattice data with only a small number of fit parameters. These formulae can be used to determine the universality of the observed phase transitions, and thus play an essential role in future investigations of Higgs-Yukawa models, in particular in the strong Yukawa coupling region.

  15. Electrical four-point probing of spherical metallic thin films coated onto micron sized polymer particles

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Sigurd R., E-mail: sigurd.r.pettersen@ntnu.no, E-mail: jianying.he@ntnu.no; Stokkeland, August Emil; Zhang, Zhiliang; He, Jianying, E-mail: sigurd.r.pettersen@ntnu.no, E-mail: jianying.he@ntnu.no [NTNU Nanomechanical Lab, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim (Norway); Kristiansen, Helge [NTNU Nanomechanical Lab, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU), NO-7491 Trondheim (Norway); Conpart AS, Dragonveien 54, NO-2013 Skjetten (Norway); Njagi, John; Goia, Dan V. [Center for Advanced Materials Processing, Clarkson University, Potsdam, New York 13699-5814 (United States); Redford, Keith [Conpart AS, Dragonveien 54, NO-2013 Skjetten (Norway)

    2016-07-25

    Micron-sized metal-coated polymer spheres are frequently used as filler particles in conductive composites for electronic interconnects. However, the intrinsic electrical resistivity of the spherical thin films has not been attainable due to deficiency in methods that eliminate the effect of contact resistance. In this work, a four-point probing method using vacuum compatible piezo-actuated micro robots was developed to directly investigate the electric properties of individual silver-coated spheres under real-time observation in a scanning electron microscope. Poly(methyl methacrylate) spheres with a diameter of 30 μm and four different film thicknesses (270 nm, 150 nm, 100 nm, and 60 nm) were investigated. By multiplying the experimental results with geometrical correction factors obtained using finite element models, the resistivities of the thin films were estimated for the four thicknesses. These were higher than the resistivity of bulk silver.

  16. Retrieving Vertical Air Motion and Raindrop Size Distributions from Vertically Pointing Doppler Radars

    Science.gov (United States)

    Williams, C. R.; Chandra, C. V.

    2017-12-01

    The vertical evolution of falling raindrops is a result of evaporation, breakup, and coalescence acting upon those raindrops. Computing these processes using vertically pointing radar observations is a two-step process. First, the raindrop size distribution (DSD) and vertical air motion need to be estimated throughout the rain shaft. Then, the changes in DSD properties need to be quantified as a function of height. The change in liquid water content is a measure of evaporation, and the change in raindrop number concentration and size are indicators of net breakup or coalescence in the vertical column. The DSD and air motion can be retrieved using observations from two vertically pointing radars operating side-by-side and at two different wavelengths. While both radars are observing the same raindrop distribution, they measure different reflectivity and radial velocities due to Rayleigh and Mie scattering properties. As long as raindrops with diameters greater than approximately 2 mm are in the radar pulse volumes, the Rayleigh and Mie scattering signatures are unique enough to estimate DSD parameters using radars operating at 3- and 35-GHz (Williams et al. 2016). Vertical decomposition diagrams (Williams 2016) are used to explore the processes acting on the raindrops. Specifically, changes in liquid water content with height quantify evaporation or accretion. When the raindrops are not evaporating, net raindrop breakup and coalescence are identified by changes in the total number of raindrops and changes in the DSD effective shape as the raindrops. This presentation will focus on describing the DSD and air motion retrieval method using vertical profiling radar observations from the Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility in Northern Oklahoma.

  17. Optimizing the calculation of point source count-centroid in pixel size measurement

    International Nuclear Information System (INIS)

    Zhou Luyi; Kuang Anren; Su Xianyu

    2004-01-01

    Pixel size is an important parameter of gamma camera and SPECT. A number of methods are used for its accurate measurement. In the original count-centroid method, where the image of a point source (PS) is acquired and its count-centroid calculated to represent PS position in the image, background counts are inevitable. Thus the measured count-centroid (X m ) is an approximation of the true count-centroid (X p ) of the PS, i.e. X m =X p + (X b -X p )/(1+R p /R b ), where Rp is the net counting rate of the PS, X b the background count-centroid and Rb the background counting. To get accurate measurement, R p must be very big, which is unpractical, resulting in the variation of measured pixel size. R p -independent calculation of PS count-centroid is desired. Methods: The proposed method attempted to eliminate the effect of the term (X b -X p )/(1 + R p /R b ) by bringing X b closer to X p and by reducing R b . In the acquired PS image, a circular ROI was generated to enclose the PS, the pixel with the maximum count being the center of the ROI. To choose the diameter (D) of the ROI, a Gaussian count distribution was assumed for the PS, accordingly, K=1-(0.5) D/R percent of the total PS counts was in the ROI, R being the full width at half maximum of the PS count distribution. D was set to be 6*R to enclose most (K=98.4%) of the PS counts. The count-centroid of the ROI was calculated to represent X p . The proposed method was tested in measuring the pixel size of a well-tuned SPECT, whose pixel size was estimated to be 3.02 mm according to its mechanical and electronic setting (128 x 128 matrix, 387 mm UFOV, ZOOM=1). For comparison, the original method, which was use in the former versions of some commercial SPECT software, was also tested. 12 PSs were prepared and their image acquired and stored. The net counting rate of the PSs increased from 10 cps to 1183 cps. Results: Using the proposed method, the measured pixel size (in mm) varied only between 3.00 and 3.01 (mean

  18. Optimizing the calculation of point source count-centroid in pixel size measurement

    International Nuclear Information System (INIS)

    Zhou Luyi; Kuang Anren; Su Xianyu

    2004-01-01

    Purpose: Pixel size is an important parameter of gamma camera and SPECT. A number of Methods are used for its accurate measurement. In the original count-centroid method, where the image of a point source(PS) is acquired and its count-centroid calculated to represent PS position in the image, background counts are inevitable. Thus the measured count-centroid (Xm) is an approximation of the true count-centroid (Xp) of the PS, i.e. Xm=Xp+(Xb-Xp)/(1+Rp/Rb), where Rp is the net counting rate of the PS, Xb the background count-centroid and Rb the background counting rate. To get accurate measurement, Rp must be very big, which is unpractical, resulting in the variation of measured pixel size. Rp-independent calculation of PS count-centroid is desired. Methods: The proposed method attempted to eliminate the effect of the term (Xb-Xp)/(1+Rp/Rb) by bringing Xb closer to Xp and by reducing Rb. In the acquired PS image, a circular ROI was generated to enclose the PS, the pixel with the maximum count being the center of the ROI. To choose the diameter (D) of the ROI, a Gaussian count distribution was assumed for the PS, accordingly, K=I-(0.5)D/R percent of the total PS counts was in the ROI, R being the full width at half maximum of the PS count distribution. D was set to be 6*R to enclose most (K=98.4%) of the PS counts. The count-centroid of the ROI was calculated to represent Xp. The proposed method was tested in measuring the pixel size of a well-tuned SPECT, whose pixel size was estimated to be 3.02 mm according to its mechanical and electronic setting (128*128 matrix, 387 mm UFOV, ZOOM=1). For comparison, the original method, which was use in the former versions of some commercial SPECT software, was also tested. 12 PSs were prepared and their image acquired and stored. The net counting rate of the PSs increased from 10cps to 1183cps. Results: Using the proposed method, the measured pixel size (in mm) varied only between 3.00 and 3.01( mean= 3.01±0.00) as Rp increased

  19. Surface Observation and Pore Size Analyses of Polypropylene/Low-Melting Point Polyester Filter Materials: Influences of Heat Treatment

    Directory of Open Access Journals (Sweden)

    Lin Jia-Horng

    2016-01-01

    Full Text Available This study proposes making filter materials with polypropylene (PP and low-melting point (LPET fibers. The influences of temperatures and times of heat treatment on the morphology of thermal bonding points and average pore size of the PP/LPET filter materials. The test results indicate that the morphology of thermal bonding points is highly correlated with the average pore size. When the temperature of heat treatment is increased, the fibers are joined first with the thermal bonding points, and then with the large thermal bonding areas, thereby decreasing the average pore size of the PP/LPET filter materials. A heat treatment of 110 °C for 60 seconds can decrease the pore size from 39.6 μm to 12.0 μm.

  20. Simulation of size segregation in granular flow with material point method

    Directory of Open Access Journals (Sweden)

    Fei Minglong

    2017-01-01

    Full Text Available Segregation is common in granular flows consisting of mixtures of particles differing in size or density. In gravity-driven flows, both gradients in total pressure (induced by gravity and gradients in velocity fluctuation fields (often associated with shear rate gradients work together to govern the evolution of segregation. Since the local shear rate and velocity fluctuations are dependent on the local concentration of the components, understanding the co-evolution of segregation and flow is critical for understanding and predicting flows where there can be a variety of particle sizes and densities, such as in nature and industry. Kinetic theory has proven to be a robust framework for predicting this simultaneous evolution but has a limit in its applicability to dense systems where collisions are highly correlated. In this paper, we introduce a model that captures the coevolution of these evolving dynamics for high density gravity driven granular mixtures. For the segregation dynamics we use a recently developed mixture theory (Fan & Hill 2011, New J. Phys; Hill & Tan 2014, J. Fluid Mech. which captures the combined effects of gravity and fluctuation fields on segregation evolution in high density granular flows. For the mixture flow dynamics, we use a recently proposed viscous-elastic-plastic constitutive model, which can describe the multi-state behaviors of granular materials, i.e. the granular solid, granular liquid and granular gas mechanical states (Fei et al. 2016, Powder Technol.. The platform we use for implementing this model is a modified Material Point Method (MPM, and we use discrete element method simulations of gravity-driven flow in an inclined channel to demonstrate that this new MPM model can predict the final segregation distribution as well as flow velocity profile well. We then discuss ongoing work where we are using this platform to test the effectiveness of particular segregation models under different boundary conditions.

  1. Comparative study of size dependent four-point probe sheet resistance measurement on laser annealed ultra-shallow junctions

    DEFF Research Database (Denmark)

    Petersen, Dirch Hjorth; Lin, Rong; Hansen, Torben Mikael

    2008-01-01

    In this comparative study, the authors demonstrate the relationship/correlation between macroscopic and microscopic four-point sheet resistance measurements on laser annealed ultra-shallow junctions (USJs). Microfabricated cantilever four-point probes with probe pitch ranging from 1.5 to 500 mu m...... have been used to characterize the sheet resistance uniformity of millisecond laser annealed USJs. They verify, both experimentally and theoretically, that the probe pitch of a four-point probe can strongly affect the measured sheet resistance. Such effect arises from the sensitivity (or "spot size......") of an in-line four-point probe. Their study shows the benefit of the spatial resolution of the micro four-point probe technique to characterize stitching effects resulting from the laser annealing process....

  2. Size-consistent methods as starting points for calculations with multi-configurational reference functions

    International Nuclear Information System (INIS)

    Wenzel, K.B.

    1982-01-01

    The CPMET method in its iterative version is a prototype for unitarily invariant and size-consistent approximations. It is shown how size consistency can be verified for simpler and therefore less time-consuming iterative methods. The idea of loosely linked reference determinants allows the use of these simple methods as a basis for the definition of the energy and the CI coefficients of systems for which multi-configurational reference functions are required. (author)

  3. A Maximum Power Point Tracking Method Combined with Constant Voltage Tracking & Variable Step-Size Perturbation

    OpenAIRE

    Kaisheng Zhang; Pan Cheng; Lifeng He

    2014-01-01

    According to the characteristics of photovoltaic cell output power curve, this paper analyzed and explained the principle of Maximum Power Point Tracking (MPPT) and both advantages and disadvantages of constant voltage tracking method & perturbation observation method. Further, in combination with the advantages of existing maximum power tracking methods, this paper comes up with an improved tracking method which is recognized as maximum power point tracking combined with constant voltage tra...

  4. Size-exclusion chromatography for the determination of the boiling point distribution of high-boiling petroleum fractions.

    Science.gov (United States)

    Boczkaj, Grzegorz; Przyjazny, Andrzej; Kamiński, Marian

    2015-03-01

    The paper describes a new procedure for the determination of boiling point distribution of high-boiling petroleum fractions using size-exclusion chromatography with refractive index detection. Thus far, the determination of boiling range distribution by chromatography has been accomplished using simulated distillation with gas chromatography with flame ionization detection. This study revealed that in spite of substantial differences in the separation mechanism and the detection mode, the size-exclusion chromatography technique yields similar results for the determination of boiling point distribution compared with simulated distillation and novel empty column gas chromatography. The developed procedure using size-exclusion chromatography has a substantial applicability, especially for the determination of exact final boiling point values for high-boiling mixtures, for which a standard high-temperature simulated distillation would have to be used. In this case, the precision of final boiling point determination is low due to the high final temperatures of the gas chromatograph oven and an insufficient thermal stability of both the gas chromatography stationary phase and the sample. Additionally, the use of high-performance liquid chromatography detectors more sensitive than refractive index detection allows a lower detection limit for high-molar-mass aromatic compounds, and thus increases the sensitivity of final boiling point determination. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. A Comparison of Airborne Laser Scanning and Image Point Cloud Derived Tree Size Class Distribution Models in Boreal Ontario

    Directory of Open Access Journals (Sweden)

    Margaret Penner

    2015-11-01

    Full Text Available Airborne Laser Scanning (ALS metrics have been used to develop area-based forest inventories; these metrics generally include estimates of stand-level, per hectare values and mean tree attributes. Tree-based ALS inventories contain desirable information on individual tree dimensions and how much they vary within a stand. Adding size class distribution information to area-based inventories helps to bridge the gap between area- and tree-based inventories. This study examines the potential of ALS and stereo-imagery point clouds to predict size class distributions in a boreal forest. With an accurate digital terrain model, both ALS and imagery point clouds can be used to estimate size class distributions with comparable accuracy. Nonparametric imputations were generally superior to parametric imputations; this may be related to the limitation of using a unimodal Weibull function on a relatively small prediction unit (e.g., 400 m2.

  6. Size-dependent axisymmetric vibration of functionally graded circular plates in bifurcation/limit point instability

    Science.gov (United States)

    Ashoori, A. R.; Vanini, S. A. Sadough; Salari, E.

    2017-04-01

    In the present paper, vibration behavior of size-dependent functionally graded (FG) circular microplates subjected to thermal loading are carried out in pre/post-buckling of bifurcation/limit-load instability for the first time. Two kinds of frequently used thermal loading, i.e., uniform temperature rise and heat conduction across the thickness direction are considered. Thermo-mechanical material properties of FG plate are supposed to vary smoothly and continuously throughout the thickness based on power law model. Modified couple stress theory is exploited to describe the size dependency of microplate. The nonlinear governing equations of motion and associated boundary conditions are extracted through generalized form of Hamilton's principle and von-Karman geometric nonlinearity for the vibration analysis of circular FG plates including size effects. Ritz finite element method is then employed to construct the matrix representation of governing equations which are solved by two different strategies including Newton-Raphson scheme and cylindrical arc-length method. Moreover, in the following a parametric study is accompanied to examine the effects of the several parameters such as material length scale parameter, temperature distributions, type of buckling, thickness to radius ratio, boundary conditions and power law index on the dimensionless frequency of post-buckled/snapped size-dependent FG plates in detail. It is found that the material length scale parameter and thermal loading have a significant effect on vibration characteristics of size-dependent circular FG plates.

  7. Effects of LiDAR point density, sampling size and height threshold on estimation accuracy of crop biophysical parameters.

    Science.gov (United States)

    Luo, Shezhou; Chen, Jing M; Wang, Cheng; Xi, Xiaohuan; Zeng, Hongcheng; Peng, Dailiang; Li, Dong

    2016-05-30

    Vegetation leaf area index (LAI), height, and aboveground biomass are key biophysical parameters. Corn is an important and globally distributed crop, and reliable estimations of these parameters are essential for corn yield forecasting, health monitoring and ecosystem modeling. Light Detection and Ranging (LiDAR) is considered an effective technology for estimating vegetation biophysical parameters. However, the estimation accuracies of these parameters are affected by multiple factors. In this study, we first estimated corn LAI, height and biomass (R2 = 0.80, 0.874 and 0.838, respectively) using the original LiDAR data (7.32 points/m2), and the results showed that LiDAR data could accurately estimate these biophysical parameters. Second, comprehensive research was conducted on the effects of LiDAR point density, sampling size and height threshold on the estimation accuracy of LAI, height and biomass. Our findings indicated that LiDAR point density had an important effect on the estimation accuracy for vegetation biophysical parameters, however, high point density did not always produce highly accurate estimates, and reduced point density could deliver reasonable estimation results. Furthermore, the results showed that sampling size and height threshold were additional key factors that affect the estimation accuracy of biophysical parameters. Therefore, the optimal sampling size and the height threshold should be determined to improve the estimation accuracy of biophysical parameters. Our results also implied that a higher LiDAR point density, larger sampling size and height threshold were required to obtain accurate corn LAI estimation when compared with height and biomass estimations. In general, our results provide valuable guidance for LiDAR data acquisition and estimation of vegetation biophysical parameters using LiDAR data.

  8. Size-exclusion-chromatography separation of randomly branched polymers with tetrafunctional branch points and local dispersity

    Czech Academy of Sciences Publication Activity Database

    Netopilík, Miloš

    2012-01-01

    Roč. 1260, 19 October (2012), s. 97-101 ISSN 0021-9673 R&D Projects: GA ČR GCP205/11/J043 Institutional research plan: CEZ:AV0Z40500505 Institutional support: RVO:61389013 Keywords : size exclusion chromatography * local dispersity * random branching Subject RIV: CD - Macromolecular Chemistry Impact factor: 4.612, year: 2012

  9. Size effect studies on geometrically scaled three point bend type specimens with U-notches

    Energy Technology Data Exchange (ETDEWEB)

    Krompholz, K.; Kalkhof, D.; Groth, E

    2001-02-01

    One of the objectives of the REVISA project (REactor Vessel Integrity in Severe Accidents) is to assess size and scale effects in plastic flow and failure. This includes an experimental programme devoted to characterising the influence of specimen size, strain rate, and strain gradients at various temperatures. One of the materials selected was the forged reactor pressure vessel material 20 MnMoNi 55, material number 1.6310 (heat number 69906). Among others, a size effect study of the creep response of this material was performed, using geometrically similar smooth specimens with 5 mm and 20 mm diameter. The tests were done under constant load in an inert atmosphere at 700 {sup o}C, 800 {sup o}C, and 900 {sup o}C, close to and within the phase transformation regime. The mechanical stresses varied from 10 MPa to 30 MPa, depending on temperature. Prior to creep testing the temperature and time dependence of scale oxidation as well as the temperature regime of the phase transformation was determined. The creep tests were supplemented by metallographical investigations.The test results are presented in form of creep curves strain versus time from which characteristic creep data were determined as a function of the stress level at given temperatures. The characteristic data are the times to 5% and 15% strain and to rupture, the secondary (minimum) creep rate, the elongation at fracture within the gauge length, the type of fracture and the area reduction after fracture. From metallographical investigations the accent's phase contents at different temperatures could be estimated. From these data also the parameters of the regression calculation (e.g. Norton's creep law) were obtained. The evaluation revealed that the creep curves and characteristic data are size dependent of varying degree, depending on the stress and temperature level, but the size influence cannot be related to corrosion or orientation effects or to macroscopic heterogeneity (position effect

  10. Stress state analysis of sub-sized pre-cracked three-point-bend specimen

    Czech Academy of Sciences Publication Activity Database

    Stratil, Luděk; Kozák, Vladislav; Hadraba, Hynek; Dlouhý, Ivo

    2012-01-01

    Roč. 19, 2/3 (2012), s. 121-129 ISSN 1802-1484 R&D Projects: GA ČR GD106/09/H035; GA ČR(CZ) GAP107/10/0361 Institutional support: RVO:68081723 Keywords : KLST * three-point bending * side grooving * Eurofer97 * J-integral Subject RIV: JL - Materials Fatigue, Friction Mechanics

  11. Monocrystalline solar cells performance coated by silver nanoparticles: Effect of NPs sizes from point of view Mie theory

    Science.gov (United States)

    Elnoby, Rasha M.; Mourad, M. Hussein; Elnaby, Salah L. Hassab; Abou Kana, Maram T. H.

    2018-05-01

    Solar based cells coated by nanoparticles (NPs) acknowledge potential utilizing as a part of photovoltaic innovation. The acquired silicon solar cells (Si-SCs) coated with different sizes of silver nanoparticles (Ag NPs) as well as uncoated were fabricated in our lab. The sizes and optical properties of prepared NPs were characterized by spectroscopic techniques and Mie theory respectively. The reflectivity of Si-SCs showed reduction of this property as the size of NPs increased. Electrical properties as open circuit current, fill factor and output power density were assessed and discussed depending on point of view of Mie theory for the optical properties of NPs. Also, photostabilities of SCs were assessed using diode laser of wavelength 450 nm and power 300 mW. Coated SCs with the largest Ag NPs size showed the highest Photostability due to its highest scattering efficiency according to Mie theory concept.

  12. Effect of Finite Particle Size on Convergence of Point Particle Models in Euler-Lagrange Multiphase Dispersed Flow

    Science.gov (United States)

    Nili, Samaun; Park, Chanyoung; Haftka, Raphael T.; Kim, Nam H.; Balachandar, S.

    2017-11-01

    Point particle methods are extensively used in simulating Euler-Lagrange multiphase dispersed flow. When particles are much smaller than the Eulerian grid the point particle model is on firm theoretical ground. However, this standard approach of evaluating the gas-particle coupling at the particle center fails to converge as the Eulerian grid is reduced below particle size. We present an approach to model the interaction between particles and fluid for finite size particles that permits convergence. We use the generalized Faxen form to compute the force on a particle and compare the results against traditional point particle method. We apportion the different force components on the particle to fluid cells based on the fraction of particle volume or surface in the cell. The application is to a one-dimensional model of shock propagation through a particle-laden field at moderate volume fraction, where the convergence is achieved for a well-formulated force model and back coupling for finite size particles. Comparison with 3D direct fully resolved numerical simulations will be used to check if the approach also improves accuracy compared to the point particle model. Work supported by the U.S. Department of Energy, National Nuclear Security Administration, Advanced Simulation and Computing Program, as a Cooperative Agreement under the Predictive Science Academic Alliance Program, under Contract No. DE-NA0002378.

  13. Simulations of HXR Foot-point Source Sizes for Modified Thick-target Models

    Czech Academy of Sciences Publication Activity Database

    Moravec, Z.; Varady, Michal; Karlický, Marian; Kašparová, Jana

    2013-01-01

    Roč. 37, č. 2 (2013), s. 535-540 ISSN 1845-8319. [Hvar Astrophysical Colloquium /12./. Hvar, 03.09.2012-07.09.2012] R&D Projects: GA ČR GAP209/10/1680; GA ČR GAP209/12/0103 Institutional support: RVO:67985815 Keywords : solar flares * hard X-rays * foot-point sources Subject RIV: BN - Astronomy, Celestial Mechanics, Astrophysics

  14. Size-effects on the surface tension near the critical point: Monte Carlo simulations of the Lennard-Jones fluid

    Science.gov (United States)

    Goujon, Florent; Ghoufi, Aziz; Malfreyt, Patrice

    2018-02-01

    We report Monte Carlo (MC) simulations of the Lennard-Jones (LJ) fluid at the liquid-vapor interface in the critical region. A slab-based tail method is associated with the MC simulations to approach as close as possible the critical point (T∗ = 0.98 TC∗) . We investigate then the impact of system-sizes on the surface tension and coexisting densities by considering very large box dimensions for which the surface tension is independent of system-sizes at low temperatures.

  15. The collapsed cone algorithm for (192)Ir dosimetry using phantom-size adaptive multiple-scatter point kernels.

    Science.gov (United States)

    Tedgren, Åsa Carlsson; Plamondon, Mathieu; Beaulieu, Luc

    2015-07-07

    The aim of this work was to investigate how dose distributions calculated with the collapsed cone (CC) algorithm depend on the size of the water phantom used in deriving the point kernel for multiple scatter. A research version of the CC algorithm equipped with a set of selectable point kernels for multiple-scatter dose that had initially been derived in water phantoms of various dimensions was used. The new point kernels were generated using EGSnrc in spherical water phantoms of radii 5 cm, 7.5 cm, 10 cm, 15 cm, 20 cm, 30 cm and 50 cm. Dose distributions derived with CC in water phantoms of different dimensions and in a CT-based clinical breast geometry were compared to Monte Carlo (MC) simulations using the Geant4-based brachytherapy specific MC code Algebra. Agreement with MC within 1% was obtained when the dimensions of the phantom used to derive the multiple-scatter kernel were similar to those of the calculation phantom. Doses are overestimated at phantom edges when kernels are derived in larger phantoms and underestimated when derived in smaller phantoms (by around 2% to 7% depending on distance from source and phantom dimensions). CC agrees well with MC in the high dose region of a breast implant and is superior to TG43 in determining skin doses for all multiple-scatter point kernel sizes. Increased agreement between CC and MC is achieved when the point kernel is comparable to breast dimensions. The investigated approximation in multiple scatter dose depends on the choice of point kernel in relation to phantom size and yields a significant fraction of the total dose only at distances of several centimeters from a source/implant which correspond to volumes of low doses. The current implementation of the CC algorithm utilizes a point kernel derived in a comparatively large (radius 20 cm) water phantom. A fixed point kernel leads to predictable behaviour of the algorithm with the worst case being a source/implant located well within a patient

  16. Point of impact: the effect of size and speed on puncture mechanics.

    Science.gov (United States)

    Anderson, P S L; LaCosse, J; Pankow, M

    2016-06-06

    The use of high-speed puncture mechanics for prey capture has been documented across a wide range of organisms, including vertebrates, arthropods, molluscs and cnidarians. These examples span four phyla and seven orders of magnitude difference in size. The commonality of these puncture systems offers an opportunity to explore how organisms at different scales and with different materials, morphologies and kinematics perform the same basic function. However, there is currently no framework for combining kinematic performance with cutting mechanics in biological puncture systems. Our aim here is to establish this framework by examining the effects of size and velocity in a series of controlled ballistic puncture experiments. Arrows of identical shape but varying in mass and speed were shot into cubes of ballistic gelatine. Results from high-speed videography show that projectile velocity can alter how the target gel responds to cutting. Mixed models comparing kinematic variables and puncture patterns indicate that the kinetic energy of a projectile is a better predictor of penetration than either momentum or velocity. These results form a foundation for studying the effects of impact on biological puncture, opening the door for future work to explore the influence of morphology and material organization on high-speed cutting dynamics.

  17. Genome wide analysis of drug-induced torsades de pointes: lack of common variants with large effect sizes.

    Directory of Open Access Journals (Sweden)

    Elijah R Behr

    Full Text Available Marked prolongation of the QT interval on the electrocardiogram associated with the polymorphic ventricular tachycardia Torsades de Pointes is a serious adverse event during treatment with antiarrhythmic drugs and other culprit medications, and is a common cause for drug relabeling and withdrawal. Although clinical risk factors have been identified, the syndrome remains unpredictable in an individual patient. Here we used genome-wide association analysis to search for common predisposing genetic variants. Cases of drug-induced Torsades de Pointes (diTdP, treatment tolerant controls, and general population controls were ascertained across multiple sites using common definitions, and genotyped on the Illumina 610k or 1M-Duo BeadChips. Principal Components Analysis was used to select 216 Northwestern European diTdP cases and 771 ancestry-matched controls, including treatment-tolerant and general population subjects. With these sample sizes, there is 80% power to detect a variant at genome-wide significance with minor allele frequency of 10% and conferring an odds ratio of ≥2.7. Tests of association were carried out for each single nucleotide polymorphism (SNP by logistic regression adjusting for gender and population structure. No SNP reached genome wide-significance; the variant with the lowest P value was rs2276314, a non-synonymous coding variant in C18orf21 (p  =  3×10(-7, odds ratio = 2, 95% confidence intervals: 1.5-2.6. The haplotype formed by rs2276314 and a second SNP, rs767531, was significantly more frequent in controls than cases (p  =  3×10(-9. Expanding the number of controls and a gene-based analysis did not yield significant associations. This study argues that common genomic variants do not contribute importantly to risk for drug-induced Torsades de Pointes across multiple drugs.

  18. A proposed adaptive step size perturbation and observation maximum power point tracking algorithm based on photovoltaic system modeling

    Science.gov (United States)

    Huang, Yu

    Solar energy becomes one of the major alternative renewable energy options for its huge abundance and accessibility. Due to the intermittent nature, the high demand of Maximum Power Point Tracking (MPPT) techniques exists when a Photovoltaic (PV) system is used to extract energy from the sunlight. This thesis proposed an advanced Perturbation and Observation (P&O) algorithm aiming for relatively practical circumstances. Firstly, a practical PV system model is studied with determining the series and shunt resistances which are neglected in some research. Moreover, in this proposed algorithm, the duty ratio of a boost DC-DC converter is the object of the perturbation deploying input impedance conversion to achieve working voltage adjustment. Based on the control strategy, the adaptive duty ratio step size P&O algorithm is proposed with major modifications made for sharp insolation change as well as low insolation scenarios. Matlab/Simulink simulation for PV model, boost converter control strategy and various MPPT process is conducted step by step. The proposed adaptive P&O algorithm is validated by the simulation results and detail analysis of sharp insolation changes, low insolation condition and continuous insolation variation.

  19. Sample size and classification error for Bayesian change-point models with unlabelled sub-groups and incomplete follow-up.

    Science.gov (United States)

    White, Simon R; Muniz-Terrera, Graciela; Matthews, Fiona E

    2018-05-01

    Many medical (and ecological) processes involve the change of shape, whereby one trajectory changes into another trajectory at a specific time point. There has been little investigation into the study design needed to investigate these models. We consider the class of fixed effect change-point models with an underlying shape comprised two joined linear segments, also known as broken-stick models. We extend this model to include two sub-groups with different trajectories at the change-point, a change and no change class, and also include a missingness model to account for individuals with incomplete follow-up. Through a simulation study, we consider the relationship of sample size to the estimates of the underlying shape, the existence of a change-point, and the classification-error of sub-group labels. We use a Bayesian framework to account for the missing labels, and the analysis of each simulation is performed using standard Markov chain Monte Carlo techniques. Our simulation study is inspired by cognitive decline as measured by the Mini-Mental State Examination, where our extended model is appropriate due to the commonly observed mixture of individuals within studies who do or do not exhibit accelerated decline. We find that even for studies of modest size ( n = 500, with 50 individuals observed past the change-point) in the fixed effect setting, a change-point can be detected and reliably estimated across a range of observation-errors.

  20. Genome wide analysis of drug-induced torsades de pointes: lack of common variants with large effect sizes

    NARCIS (Netherlands)

    Behr, Elijah R.; Ritchie, Marylyn D.; Tanaka, Toshihiro; Kääb, Stefan; Crawford, Dana C.; Nicoletti, Paola; Floratos, Aris; Sinner, Moritz F.; Kannankeril, Prince J.; Wilde, Arthur A. M.; Bezzina, Connie R.; Schulze-Bahr, Eric; Zumhagen, Sven; Guicheney, Pascale; Bishopric, Nanette H.; Marshall, Vanessa; Shakir, Saad; Dalageorgou, Chrysoula; Bevan, Steve; Jamshidi, Yalda; Bastiaenen, Rachel; Myerburg, Robert J.; Schott, Jean-Jacques; Camm, A. John; Steinbeck, Gerhard; Norris, Kris; Altman, Russ B.; Tatonetti, Nicholas P.; Jeffery, Steve; Kubo, Michiaki; Nakamura, Yusuke; Shen, Yufeng; George, Alfred L.; Roden, Dan M.

    2013-01-01

    Marked prolongation of the QT interval on the electrocardiogram associated with the polymorphic ventricular tachycardia Torsades de Pointes is a serious adverse event during treatment with antiarrhythmic drugs and other culprit medications, and is a common cause for drug relabeling and withdrawal.

  1. The social effectiveness of small and medium-sized entities standard from the view point of Game Theory

    Directory of Open Access Journals (Sweden)

    Alexandre Gonzales

    2013-05-01

    Full Text Available Accounting has been undergoing significant changes, and among these changes is the creation of a standard for the accounting of small and medium enterprises, in line with international accounting standards for companies of this size. This rule arose from the development of a pronouncement by the Accounting Pronouncements Committee – CPC, which subsequently was approved by the Federal Accounting Council - CFC through specific resolutions. The present study aimed to analyze trends of accounting professionals and business managers concerning the adoption of Technical Pronouncement emitted by Accounting Pronouncements Committee for Small and Medium Enterprises. Considering the level of complexity of the operations performed by companies of this size, the lack of oversight by specific entities and the question of enforcement of these pronouncements, it was used the game theory to determine possible strategies adopted by the accountants and business managers regarding to the effective adoption of pronouncement for SMEs. The study was characterized as a descriptive research, using bibliographical and field research. With the use of surveys sought to identify the perceptions of accounting professionals regarding the adoption of the pronouncement. It was found that this statement constitutes a valid legal standard, endowed with legal effectiveness and technical efficiency, but lacking social effectiveness, due to the low level of efforts for its adoption, both by accounting professionals and by firms.

  2. Determination of char combustion kinetics parameters: comparison of point detector and imaging-based particle-sizing pyrometry.

    Science.gov (United States)

    Schiemann, Martin; Geier, Manfred; Shaddix, Christopher R; Vorobiev, Nikita; Scherer, Viktor

    2014-07-01

    In this study, the char burnout characteristics of two German coals (a lignite and a high-volatile bituminous coal) were investigated using two different experimental configurations and optical techniques in two distinct laboratories for measurement of temperature and size of burning particles. The optical diagnostic hardware is quite different in the two systems, but both perform two-color pyrometry and optical sizing measurements on individual particles burning in isolation from each other in high-temperature laminar flows to characterize the char consumption kinetics. The performance of the specialized systems is compared for two different combustion atmospheres (with 6.6 and 12 vol.% O2) and gas temperatures between 1700 and 1800 K. The measured particle temperatures and diameters are converted to char burning rate parameters for several residence times during the course of the particles' burnout. The results confirm that comparable results are obtained with the two configurations, although higher levels of variability in the measured data were observed in the imaging-based pyrometer setup. Corresponding uncertainties in kinetics parameters were larger, and appear to be more sensitive to systematic measurement errors when lower oxygen contents are used in the experiments. Consequently, burnout experiments in environments with sufficiently high O2 contents may be used to measure reliable char burning kinetics rates. Based on simulation results for the two coals, O2 concentrations in the range 10%-30% are recommended for kinetic rate measurements on 100 μm particles.

  3. Pool size measurements facilitate the determination of fluxes at branching points in nonstationary metabolic flux analysis: The case of Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Robert eHeise

    2015-06-01

    Full Text Available Pool size measurements are important for the estimation of absolute intracellular fluxes in particular scenarios based on data from heavy carbon isotope experiments. Recently, steady-state fluxes estimates were obtained for central carbon metabolism in an intact illuminated rosette of Arabidopsis thaliana grown photoautotrophically (Szecowka et al., 2013; Heise et al., 2014. Fluxes were estimated therein by integrating mass-spectrometric data of the dynamics of the unlabeled metabolic fraction, data on metabolic pool sizes, partitioning of metabolic pools between cellular compartments and estimates of photosynthetically inactive pools, with a simplified model of plant central carbon metabolism. However, the fluxes were determined by treating the pool sizes as fixed parameters. Here we investigated whether and, if so, to what extent the treatment of pool sizes as parameters to be optimized in three scenarios may affect the flux estimates. The results are discussed in terms of benchmark values for canonical pathways and reactions, including starch and sucrose synthesis as well as the ribulose-1,5-bisphosphate carboxylation and oxygenation reactions. In addition, we discuss pathways emerging from a divergent branch point for which pool sizes are required for flux estimation, irrespective of the computational approach used for the simulation of the observable labelling pattern. Therefore, our findings indicate the necessity for development of techniques for accurate pool size measurements to improve the quality of flux estimates from nonstationary flux estimates in intact plant cells in the absence of alternative flux measurements.

  4. Dosimetry for small size beams such as IMRT and stereotactic radiotherapy, is the concept of the dose at a point still relevant? proposal for a new methodology

    International Nuclear Information System (INIS)

    Ostrowsky, A.; Bordy, J.M.; Daures, J.; De Carlan, L.; Delaunay, F.

    2010-01-01

    Solving the problem of traceability of the absorbed dose to the tumour for the radiation fields of small and very small dimensions, like those used for new treatment modality usually results in the use of dosemeters of much smaller size than those of the beam. For the realisation of the reference in primary standards laboratories, the absence of technology likely to produce absolute small-size dosemeters leaves no possibility for the direct measurement of the absorbed dose at a point and implies the use of passive or active small-size transfer dosemeters. This report intends to introduce a new kind of dose quantity for radiotherapy similar do the Dose Area Product concept used in radiology. Such a new concept has to be propagated through the metrology chain, including the TPS, to the calculation of the absorbed dose to the tumour. (authors)

  5. Can the Point Defect Model Explain the Influence of Temperature and Anion Size on Pitting of Stainless Steels

    International Nuclear Information System (INIS)

    Blackwood, Daniel J.

    2015-01-01

    The pitting behaviours of 304L and 316L stainless steels were investigated at 3 °C to 90 °C in 1 M solutions of NaCl, NaBr and NaI by potentiodynamic polarization. The temperature dependences of the pitting potential varied according to the anion, being near linear in bromide but exponential in chloride. As a result, at low temperatures grades 304L and 316L steel are most susceptible to pitting by bromide ions, while at high temperatures both stainless steels were more susceptible to pitting by small chloride anions than the larger bromide and iodide. Thus, increasing temperature appears to favour attack by smaller anions. This paper will attempt to rationalise both of the above findings in terms of the point defect model. Initial findings are that qualitatively this approach can be reasonably successful, but not at the quantitative level, possibly due to insufficient data on the mechanical properties of thin passive films

  6. Follow-up of hepatic and peritoneal metastases of gastrointestinal tumors (GIST) under Imatinib therapy requires different criteria of radiological evaluation (size is not everything{exclamation_point}{exclamation_point}{exclamation_point})

    Energy Technology Data Exchange (ETDEWEB)

    Mabille, Mylene [Department of Radiology, Institut Gustave-Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Department of Radiology, Hopital Antoine Beclere, 157 rue de la Porte de Trivaux 92140 Clamart (France); Vanel, Daniel [Department of Radiology, Institut Gustave-Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Istituti Ortopedici Rizzoli, 1/10 via del Barbiano 40106 Bologna (Italy)], E-mail: dvanel@ior.it; Albiter, Marcela [Department of Radiology, Hopital Saint Louis, 01 Avenue Claude Vellefaux 75175 Paris Cedex 10 (France); Le Cesne, Axel [Department of Medical Oncology, Institut Gustave Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Bonvalot, Sylvie [Department of Surgery, Institut Gustave Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Le Pechoux, Cecile [Department of Radiotherapy, Institut Gustave Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Terrier, Philippe [Department of Pathology, Institut Gustave Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France); Shapeero, Lorraine G. [Department of Radiology, Uniformed Services University of the Health Sciences, 4301 Jones Bridge Road, Bethesda, MD 20814 (United States); Bone and Soft Tissue Program, United States Military Cancer Institute, 6900 Georgia Ave, NW, Washington, DC 20307 (United States); Dromain, Clarisse [Department of Radiology, Institut Gustave-Roussy, 39 rue Camille Desmoulins 94805 Villejuif (France)

    2009-02-15

    Purpose: To define computed tomography (CT) criteria for evaluating the response of patients with gastrointestinal stromal tumors (GIST) who are receiving Imatinib (tyrosine-kinase inhibitor therapy). Materials and methods: This prospective CT study evaluated 107 consecutive patients with advanced metastatic GIST treated with Imatinib. Results: Seventy patients had total or partial cystic-like transformation of hepatic and/or peritoneal metastases. These pseudocysts remained unchanged in size or stable in size on successive CT examinations (stable disease according to RECIST criteria). Forty-six patients developed metastases, 17 patients showed increasing parietal thickness and 29 patients with peripheral enhancing nodules. These CT changes represented local recurrence consistent with GIST resistance to Imatinib treatment. WHO or RECIST criteria did not provide a reliable evaluation of disease evolution or recurrence. Development of new enhancement of lesions (parietal thickness or nodule) was the only reliable criterion. Conclusion: The development of peripheral thickening or enhancing nodules within cystic-like metastatic lesions, even without any change in size, represented progressive GIST under Imatinib, growing in a short time and should alert the clinician for the possible need for a change in therapy.

  7. A Field Evaluation of the Time-of-Detection Method to Estimate Population Size and Density for Aural Avian Point Counts

    Directory of Open Access Journals (Sweden)

    Mathew W. Alldredge

    2007-12-01

    Full Text Available The time-of-detection method for aural avian point counts is a new method of estimating abundance, allowing for uncertain probability of detection. The method has been specifically designed to allow for variation in singing rates of birds. It involves dividing the time interval of the point count into several subintervals and recording the detection history of the subintervals when each bird sings. The method can be viewed as generating data equivalent to closed capture-recapture information. The method is different from the distance and multiple-observer methods in that it is not required that all the birds sing during the point count. As this method is new and there is some concern as to how well individual birds can be followed, we carried out a field test of the method using simulated known populations of singing birds, using a laptop computer to send signals to audio stations distributed around a point. The system mimics actual aural avian point counts, but also allows us to know the size and spatial distribution of the populations we are sampling. Fifty 8-min point counts (broken into four 2-min intervals using eight species of birds were simulated. Singing rate of an individual bird of a species was simulated following a Markovian process (singing bouts followed by periods of silence, which we felt was more realistic than a truly random process. The main emphasis of our paper is to compare results from species singing at (high and low homogenous rates per interval with those singing at (high and low heterogeneous rates. Population size was estimated accurately for the species simulated, with a high homogeneous probability of singing. Populations of simulated species with lower but homogeneous singing probabilities were somewhat underestimated. Populations of species simulated with heterogeneous singing probabilities were substantially underestimated. Underestimation was caused by both the very low detection probabilities of all distant

  8. On the application of the weak-beam technique to the determination of the sizes of small point-defect clusters in ion-irradiated copper

    International Nuclear Information System (INIS)

    Jenkins, M. L.

    1998-01-01

    We have made an analysis of the conditions necessary for the successful use of the weak-beam technique for identifying and characterizing small point-defect clusters in ion-irradiated copper. The visibility of small defects was found to depend only weakly on the magnitude of the beam-convergence. In general, the image sizes of small clusters were found to be most sensitive to the magnitude of Sa with the image sizes of some individual defects changing by large amounts with changes as small as 0.025 nm -1 . The most reliable information on the true defect size is likely to be obtained by taking a series of 5-9 micrographs with a systematic variation of deviation parameter from 0.2-0.3 nm -1 . This procedure allows size information to be obtained down to a resolution limit of about 0.5 nm for defects situated throughout a foil thickness of 60 nm. The technique has been applied to the determination of changes in the sizes of small defects produced by a low-temperature in-situ irradiation and annealing experiment

  9. Optimal production lot size and reorder point of a two-stage supply chain while random demand is sensitive with sales teams' initiatives

    Science.gov (United States)

    Sankar Sana, Shib

    2016-01-01

    The paper develops a production-inventory model of a two-stage supply chain consisting of one manufacturer and one retailer to study production lot size/order quantity, reorder point sales teams' initiatives where demand of the end customers is dependent on random variable and sales teams' initiatives simultaneously. The manufacturer produces the order quantity of the retailer at one lot in which the procurement cost per unit quantity follows a realistic convex function of production lot size. In the chain, the cost of sales team's initiatives/promotion efforts and wholesale price of the manufacturer are negotiated at the points such that their optimum profits reached nearer to their target profits. This study suggests to the management of firms to determine the optimal order quantity/production quantity, reorder point and sales teams' initiatives/promotional effort in order to achieve their maximum profits. An analytical method is applied to determine the optimal values of the decision variables. Finally, numerical examples with its graphical presentation and sensitivity analysis of the key parameters are presented to illustrate more insights of the model.

  10. Universal Signatures of Quantum Critical Points from Finite-Size Torus Spectra: A Window into the Operator Content of Higher-Dimensional Conformal Field Theories.

    Science.gov (United States)

    Schuler, Michael; Whitsitt, Seth; Henry, Louis-Paul; Sachdev, Subir; Läuchli, Andreas M

    2016-11-18

    The low-energy spectra of many body systems on a torus, of finite size L, are well understood in magnetically ordered and gapped topological phases. However, the spectra at quantum critical points separating such phases are largely unexplored for (2+1)D systems. Using a combination of analytical and numerical techniques, we accurately calculate and analyze the low-energy torus spectrum at an Ising critical point which provides a universal fingerprint of the underlying quantum field theory, with the energy levels given by universal numbers times 1/L. We highlight the implications of a neighboring topological phase on the spectrum by studying the Ising* transition (i.e. the transition between a Z_{2} topological phase and a trivial paramagnet), in the example of the toric code in a longitudinal field, and advocate a phenomenological picture that provides qualitative insight into the operator content of the critical field theory.

  11. Relative impact of on-road vehicular and point-source industrial emissions of air pollutants in a medium-sized Andean city

    Science.gov (United States)

    González, C. M.; Gómez, C. D.; Rojas, N. Y.; Acevedo, H.; Aristizábal, B. H.

    2017-03-01

    Cities in emerging countries are facing a fast growth and urbanization; however, the study of air pollutant emissions and its dynamics is scarce, making their populations vulnerable to potential effects of air pollution. This situation is critical in medium-sized urban areas built along the tropical Andean mountains. This work assesses the contribution of on-road vehicular and point-source industrial activities in the medium-sized Andean city of Manizales, Colombia. Annual fluxes of criteria pollutants, NMVOC, and greenhouse gases were estimated. Emissions were dominated by vehicular activity, with more than 90% of total estimated releases for the majority of air pollutants. On-road vehicular emissions for CO (43.4 Gg/yr) and NMVOC (9.6 Gg/yr) were mainly associated with the use of motorcycles (50% and 81% of total CO and NMVOC emissions respectively). Public transit buses were the main source of PM10 (47%) and NOx (48%). The per-capita emission index was significantly higher in Manizales than in other medium-sized cities, especially for NMVOC, CO, NOx and CO2. The unique mountainous terrain of Andean cities suggest that a methodology based on VSP model could give more realistic emission estimates, with additional model components that include slope and acceleration. Food and beverage facilities were the main contributors of point-source industrial emissions for PM10 (63%), SOx (55%) and NOx (45%), whereas scrap metal recycling had high emissions of CO (73%) and NMVOC (47%). Results provide the baseline for ongoing research in atmospheric modeling and urban air quality, in order to improve the understanding of air pollutant fluxes, transport and transformation in the atmosphere. In addition, this emission inventory could be used as a tool to identify areas of public health exposure and provide information for future decision makers.

  12. Impact of device size and thickness of Al2O3 film on the Cu pillar and resistive switching characteristics for 3D cross-point memory application

    Science.gov (United States)

    Panja, Rajeswar; Roy, Sourav; Jana, Debanjan; Maikap, Siddheswar

    2014-12-01

    Impact of the device size and thickness of Al2O3 film on the Cu pillars and resistive switching memory characteristics of the Al/Cu/Al2O3/TiN structures have been investigated for the first time. The memory device size and thickness of Al2O3 of 18 nm are observed by transmission electron microscope image. The 20-nm-thick Al2O3 films have been used for the Cu pillar formation (i.e., stronger Cu filaments) in the Al/Cu/Al2O3/TiN structures, which can be used for three-dimensional (3D) cross-point architecture as reported previously Nanoscale Res. Lett.9:366, 2014. Fifty randomly picked devices with sizes ranging from 8 × 8 to 0.4 × 0.4 μm2 have been measured. The 8-μm devices show 100% yield of Cu pillars, whereas only 74% successful is observed for the 0.4-μm devices, because smaller size devices have higher Joule heating effect and larger size devices show long read endurance of 105 cycles at a high read voltage of -1.5 V. On the other hand, the resistive switching memory characteristics of the 0.4-μm devices with a 2-nm-thick Al2O3 film show superior as compared to those of both the larger device sizes and thicker (10 nm) Al2O3 film, owing to higher Cu diffusion rate for the larger size and thicker Al2O3 film. In consequence, higher device-to-device uniformity of 88% and lower average RESET current of approximately 328 μA are observed for the 0.4-μm devices with a 2-nm-thick Al2O3 film. Data retention capability of our memory device of >48 h makes it a promising one for future nanoscale nonvolatile application. This conductive bridging resistive random access memory (CBRAM) device is forming free at a current compliance (CC) of 30 μA (even at a lowest CC of 0.1 μA) and operation voltage of ±3 V at a high resistance ratio of >104.

  13. Tissue modulus calculated from beam theory is biased by bone size and geometry: implications for the use of three-point bending tests to determine bone tissue modulus.

    Science.gov (United States)

    van Lenthe, G Harry; Voide, Romain; Boyd, Steven K; Müller, Ralph

    2008-10-01

    Current practice to determine bone tissue modulus of murine cortical bone is to estimate it from three-point bending tests, using Euler-Bernoulli beam theory. However, murine femora are not perfect beams; hence, results can be inaccurate. Our aim was to assess the accuracy of beam theory, which we tested for two commonly used inbred strains of mice, C57BL/6 (B6) and C3H/He (C3H). We measured the three-dimensional structure of male and female B6 and C3H femora (N=20/group) by means of micro-computed tomography. For each femur five micro-finite element (micro-FE) models were created that simulated three-point bending tests with varying distances between the supports. Tissue modulus was calculated from beam theory using micro-FE results. The accuracy of beam theory was assessed by comparing the beam theory-derived moduli with the modulus as used in the micro-FE analyses. An additional set of fresh-frozen femora (10 B6 and 12 C3H) was biomechanically tested and subjected to the same micro-FE analyses. These combined experimental-computational analyses enabled an unbiased assessment of specimen-specific tissue modulus. We found that by using beam theory, tissue modulus was underestimated for all femora. Femoral geometry and size had strong effects on beam theory-derived tissue moduli. Owing to their relatively thin cortex, underestimation was markedly higher for B6 than for C3H. Underestimation was dependent on support width in a strain-specific manner. From our combined experimental-computational approach we calculated tissue moduli of 12.0+/-1.3 GPa and 13.4+/-2.1 GPa for B6 and C3H, respectively. We conclude that tissue moduli in murine femora are strongly underestimated when calculated from beam theory. Using image-based micro-FE analyses we could precisely quantify this underestimation. We showed that previously reported murine inbred strain-specific differences in tissue modulus are largely an effect of geometric differences, not accounted for by beam theory. We

  14. Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear.

    Science.gov (United States)

    Stawarczyk, Bogna; Frevert, Kathrin; Ender, Andreas; Roos, Malgorzata; Sener, Beatrice; Wimmer, Timea

    2016-06-01

    To test the mechanical and optical properties of monolithic zirconia in comparison to conventional zirconia. Specimens were prepared from: monolithic zirconia: Zenostar (ZS), DD Bio ZX(2) hochtransluzent (DD), Ceramill Zolid (CZ), InCoris TZI (IC) and a conventional zirconia Ceramill ZI (CZI). Contrast ratio (N=75/n=15) was measured according to ISO 2471:2008. Grain sizes (N=75/n=15) were investigated with scanning electron microscope. Four-point flexural strength (N=225/n=15/zirconia and aging regime) was measured initially, after aging in autoclave or chewing simulator (ISO 13356:2008). Two-body wear of polished and glazed/veneered specimens (N=108/n=12) was analyzed in a chewing simulator using human teeth as antagonists. Data were analyzed using 2-/1-way ANOVA with post-hoc Scheffé, Kruskal-Wallis-H, Mann-Whitney-U, Spearman-Rho, Weibull statistics and linear mixed models (pzirconia showed higher optical, but lower mechanical properties than conventional zirconia. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Reciprocal Relationship between Head Size, an Autism Endophenotype, and Gene Dosage at 19p13.12 Points to AKAP8 and AKAP8L.

    Directory of Open Access Journals (Sweden)

    Rebecca A Nebel

    Full Text Available Microcephaly and macrocephaly are overrepresented in individuals with autism and are thought to be disease-related risk factors or endophenotypes. Analysis of DNA microarray results from a family with a low functioning autistic child determined that the proband and two additional unaffected family members who carry a rare inherited 760 kb duplication of unknown clinical significance at 19p13.12 are macrocephalic. Consideration alongside overlapping deletion and duplication events in the literature provides support for a strong relationship between gene dosage at this locus and head size, with losses and gains associated with microcephaly (p=1.11x10(-11 and macrocephaly (p=2.47x10(-11, respectively. Data support A kinase anchor protein 8 and 8-like (AKAP8 and AKAP8L as candidate genes involved in regulation of head growth, an interesting finding given previous work implicating the AKAP gene family in autism. Towards determination of which of AKAP8 and AKAP8L may be involved in the modulation of head size and risk for disease, we analyzed exome sequencing data for 693 autism families (2591 individuals where head circumference data were available. No predicted loss of function variants were observed, precluding insights into relationship to head size, but highlighting strong evolutionary conservation. Taken together, findings support the idea that gene dosage at 19p13.12, and AKAP8 and/or AKAP8L in particular, play an important role in modulation of head size and may contribute to autism risk. Exome sequencing of the family also identified a rare inherited variant predicted to disrupt splicing of TPTE / PTEN2, a PTEN homologue, which may likewise contribute to both macrocephaly and autism risk.

  16. Operationalizing hippocampal volume as an enrichment biomarker for amnestic MCI trials: effect of algorithm, test-retest variability and cut-point on trial cost, duration and sample size

    Science.gov (United States)

    Yu, P.; Sun, J.; Wolz, R.; Stephenson, D.; Brewer, J.; Fox, N.C.; Cole, P.E.; Jack, C.R.; Hill, D.L.G.; Schwarz, A.J.

    2014-01-01

    Objective To evaluate the effect of computational algorithm, measurement variability and cut-point on hippocampal volume (HCV)-based patient selection for clinical trials in mild cognitive impairment (MCI). Methods We used normal control and amnestic MCI subjects from ADNI-1 as normative reference and screening cohorts. We evaluated the enrichment performance of four widely-used hippocampal segmentation algorithms (FreeSurfer, HMAPS, LEAP and NeuroQuant) in terms of two-year changes in MMSE, ADAS-Cog and CDR-SB. We modeled the effect of algorithm, test-retest variability and cut-point on sample size, screen fail rates and trial cost and duration. Results HCV-based patient selection yielded not only reduced sample sizes (by ~40–60%) but also lower trial costs (by ~30–40%) across a wide range of cut-points. Overall, the dependence on the cut-point value was similar for the three clinical instruments considered. Conclusion These results provide a guide to the choice of HCV cut-point for aMCI clinical trials, allowing an informed trade-off between statistical and practical considerations. PMID:24211008

  17. Small-Magnitude Effect Sizes in Epigenetic End Points are Important in Children's Environmental Health Studies: The Children's Environmental Health and Disease Prevention Research Center's Epigenetics Working Group.

    Science.gov (United States)

    Breton, Carrie V; Marsit, Carmen J; Faustman, Elaine; Nadeau, Kari; Goodrich, Jaclyn M; Dolinoy, Dana C; Herbstman, Julie; Holland, Nina; LaSalle, Janine M; Schmidt, Rebecca; Yousefi, Paul; Perera, Frederica; Joubert, Bonnie R; Wiemels, Joseph; Taylor, Michele; Yang, Ivana V; Chen, Rui; Hew, Kinjal M; Freeland, Deborah M Hussey; Miller, Rachel; Murphy, Susan K

    2017-04-01

    Characterization of the epigenome is a primary interest for children's environmental health researchers studying the environmental influences on human populations, particularly those studying the role of pregnancy and early-life exposures on later-in-life health outcomes. Our objective was to consider the state of the science in environmental epigenetics research and to focus on DNA methylation and the collective observations of many studies being conducted within the Children's Environmental Health and Disease Prevention Research Centers, as they relate to the Developmental Origins of Health and Disease (DOHaD) hypothesis. We address the current laboratory and statistical tools available for epigenetic analyses, discuss methods for validation and interpretation of findings, particularly when magnitudes of effect are small, question the functional relevance of findings, and discuss the future for environmental epigenetics research. A common finding in environmental epigenetic studies is the small-magnitude epigenetic effect sizes that result from such exposures. Although it is reasonable and necessary that we question the relevance of such small effects, we present examples in which small effects persist and have been replicated across populations and across time. We encourage a critical discourse on the interpretation of such small changes and further research on their functional relevance for children's health. The dynamic nature of the epigenome will require an emphasis on future longitudinal studies in which the epigenome is profiled over time, over changing environmental exposures, and over generations to better understand the multiple ways in which the epigenome may respond to environmental stimuli.

  18. Feasibility and Diagnostic Accuracy of Point-of-Care Abdominal Sonography by Pocket-Sized Imaging Devices, Performed by Medical Residents.

    Science.gov (United States)

    Kjesbu, Ingunn E; Laursen, Christian B; Graven, Torbjørn; Holden, Hans Martin; Rømo, Bjørnar; Newton Andersen, Garrett; Mjølstad, Ole Christian; Lassen, Annmarie; Dalen, Håvard

    2017-06-01

    We aimed to study the feasibility and diagnostic performance of bedside ultrasound by examination of the liver, gallbladder, kidneys, and abdominal aorta performed by medical residents with limited experience in ultrasound, on emergency admissions using pocket-sized imaging devices (PSIDs). A total of 199 patients admitted acutely to the medical department at the non-university Levanger Hospital, Norway, during the period from April 4 to June 23, 2011, were consecutively included. Six medical residents, selected by drawing, examined these patients with a PSID at admission. Reference imaging was performed and/or judged at the Department of Radiology. Each resident performed a median of 28 examinations (interquartile range 24-46). Imaging of the kidneys and liver were feasible in 85 and 82% of the cases, and the corresponding values for the gallbladder and abdominal aorta were 79 and 50%, respectively. The sensitivity of medical residents to detect organ pathology with the aid of PSID, ranged between 54% (95% confidence interval [CI]: 29-77%) and 74% (95% CI: 51-88%). Assessment of the aortic dimension showed moderate correlation, with r = 0.38. Examination by PSID by inexperienced residents may allow for early detection of abdominal pathology, but do not appear to be accurate enough to rule out pathology in the abdominal organs. © 2017 by the American Institute of Ultrasound in Medicine.

  19. Dose-volume histogram parameters of high-dose-rate brachytherapy for Stage I-II cervical cancer (≤4cm) arising from a small-sized uterus treated with a point A dose-reduced plan

    International Nuclear Information System (INIS)

    Nakagawa, Akiko; Noda, Shin-ei; Kubo, Nobuteru; Kuwako, Keiko; Nakano, Takashi; Ohno, Tatsuya; Saitoh, Jun-ichi

    2014-01-01

    We investigated the rectal dose-sparing effect and tumor control of a point A dose-reduced plan in patients with Stage I-II cervical cancer (≤4 cm) arising from a small-sized uterus. Between October 2008 and August 2011, 19 patients with Stage I-II cervical cancer (≤4 cm) were treated with external beam radiotherapy (EBRT) for the pelvis and CT-guided brachytherapy. Seven patients were treated with brachytherapy with standard loading of source-dwell positions and a fraction dose of 6 Gy at point A (conventional brachy-plan). The other 12 patients with a small uterus close to the rectum or small intestine were treated with brachytherapy with a point A dose-reduction to match D2cc of the rectum and <6 Gy as the dose constraint ('point A dose-reduced plan') instead of the 6-Gy plan at point A ('tentative 6-Gy plan'). The total doses from EBRT and brachytherapy were added up and normalized to a biological equivalent dose of 2 Gy per fraction (EQD2). The median doses to the high-risk clinical target volume (HR-CTV) D90 in the conventional brachy-plan, tentative 6-Gy plan and point A dose-reduced plan were 62 GyEQD2, 80 GyEQD2 and 64 GyEQD2, respectively. The median doses of rectal D2cc in the corresponding three plans were 42 GyEQD2, 62 GyEQD2 and 51 GyEQD2, respectively. With a median follow-up period of 35 months, three patients developed Grade-1 late rectal complications and no patients developed local recurrence. Our preliminary results suggested that CT-guided brachytherapy using an individualized point A dose-reduced plan might be useful for reducing late rectal complications while maintaining primary tumor control. (author)

  20. Operationalizing hippocampal volume as an enrichment biomarker for amnestic mild cognitive impairment trials: effect of algorithm, test-retest variability, and cut point on trial cost, duration, and sample size.

    Science.gov (United States)

    Yu, Peng; Sun, Jia; Wolz, Robin; Stephenson, Diane; Brewer, James; Fox, Nick C; Cole, Patricia E; Jack, Clifford R; Hill, Derek L G; Schwarz, Adam J

    2014-04-01

    The objective of this study was to evaluate the effect of computational algorithm, measurement variability, and cut point on hippocampal volume (HCV)-based patient selection for clinical trials in mild cognitive impairment (MCI). We used normal control and amnestic MCI subjects from the Alzheimer's Disease Neuroimaging Initiative 1 (ADNI-1) as normative reference and screening cohorts. We evaluated the enrichment performance of 4 widely used hippocampal segmentation algorithms (FreeSurfer, Hippocampus Multi-Atlas Propagation and Segmentation (HMAPS), Learning Embeddings Atlas Propagation (LEAP), and NeuroQuant) in terms of 2-year changes in Mini-Mental State Examination (MMSE), Alzheimer's Disease Assessment Scale-Cognitive Subscale (ADAS-Cog), and Clinical Dementia Rating Sum of Boxes (CDR-SB). We modeled the implications for sample size, screen fail rates, and trial cost and duration. HCV based patient selection yielded reduced sample sizes (by ∼40%-60%) and lower trial costs (by ∼30%-40%) across a wide range of cut points. These results provide a guide to the choice of HCV cut point for amnestic MCI clinical trials, allowing an informed tradeoff between statistical and practical considerations. Copyright © 2014 Elsevier Inc. All rights reserved.

  1. Dosimetry for small size beams such as IMRT and stereotactic radiotherapy, is the concept of the dose at a point still relevant? proposal for a new methodology; Dosimetrie pour les faisceaux de petites dimensions pour la RCMI et la stereotaxie. Le concept de dose en un point est il adapte? proposition pour une nouvelle methodologie

    Energy Technology Data Exchange (ETDEWEB)

    Ostrowsky, A.; Bordy, J.M.; Daures, J.; De Carlan, L.; Delaunay, F.

    2010-07-01

    Solving the problem of traceability of the absorbed dose to the tumour for the radiation fields of small and very small dimensions, like those used for new treatment modality usually results in the use of dosemeters of much smaller size than those of the beam. For the realisation of the reference in primary standards laboratories, the absence of technology likely to produce absolute small-size dosemeters leaves no possibility for the direct measurement of the absorbed dose at a point and implies the use of passive or active small-size transfer dosemeters. This report intends to introduce a new kind of dose quantity for radiotherapy similar do the Dose Area Product concept used in radiology. Such a new concept has to be propagated through the metrology chain, including the TPS, to the calculation of the absorbed dose to the tumour. (authors)

  2. Dose-volume histogram parameters of high-dose-rate brachytherapy for Stage I-II cervical cancer (≤4cm) arising from a small-sized uterus treated with a point A dose-reduced plan.

    Science.gov (United States)

    Nakagawa, Akiko; Ohno, Tatsuya; Noda, Shin-ei; Kubo, Nobuteru; Kuwako, Keiko; Saitoh, Jun-Ichi; Nakano, Takashi

    2014-07-01

    We investigated the rectal dose-sparing effect and tumor control of a point A dose-reduced plan in patients with Stage I-II cervical cancer (≤4 cm) arising from a small-sized uterus. Between October 2008 and August 2011, 19 patients with Stage I-II cervical cancer (≤4 cm) were treated with external beam radiotherapy (EBRT) for the pelvis and CT-guided brachytherapy. Seven patients were treated with brachytherapy with standard loading of source-dwell positions and a fraction dose of 6 Gy at point A (conventional brachy-plan). The other 12 patients with a small uterus close to the rectum or small intestine were treated with brachytherapy with a point A dose-reduction to match D2cc of the rectum and <6 Gy as the dose constraint ('point A dose-reduced plan') instead of the 6-Gy plan at point A ('tentative 6-Gy plan'). The total doses from EBRT and brachytherapy were added up and normalized to a biological equivalent dose of 2 Gy per fraction (EQD2). The median doses to the high-risk clinical target volume (HR-CTV) D90 in the conventional brachy-plan, tentative 6-Gy plan and point A dose-reduced plan were 62 GyEQD2, 80 GyEQD2 and 64 GyEQD2, respectively. The median doses of rectal D2cc in the corresponding three plans were 42 GyEQD2, 62 GyEQD2 and 51 GyEQD2, respectively. With a median follow-up period of 35 months, three patients developed Grade-1 late rectal complications and no patients developed local recurrence. Our preliminary results suggested that CT-guided brachytherapy using an individualized point A dose-reduced plan might be useful for reducing late rectal complications while maintaining primary tumor control. © The Author 2014. Published by Oxford University Press on behalf of The Japan Radiation Research Society and Japanese Society for Radiation Oncology.

  3. A Point Mutation in Suppressor of Cytokine Signalling 2 (Socs2 Increases the Susceptibility to Inflammation of the Mammary Gland while Associated with Higher Body Weight and Size and Higher Milk Production in a Sheep Model.

    Directory of Open Access Journals (Sweden)

    Rachel Rupp

    2015-12-01

    Full Text Available Mastitis is an infectious disease mainly caused by bacteria invading the mammary gland. Genetic control of susceptibility to mastitis has been widely evidenced in dairy ruminants, but the genetic basis and underlying mechanisms are still largely unknown. We describe the discovery, fine mapping and functional characterization of a genetic variant associated with elevated milk leukocytes count, or SCC, as a proxy for mastitis. After implementing genome-wide association studies, we identified a major QTL associated with SCC on ovine chromosome 3. Fine mapping of the region, using full sequencing with 12X coverage in three animals, provided one strong candidate SNP that mapped to the coding sequence of a highly conserved gene, suppressor of cytokine signalling 2 (Socs2. The frequency of the SNP associated with increased SCC was 21.7% and the Socs2 genotype explained 12% of the variance of the trait. The point mutation induces the p.R96C substitution in the SH2 functional domain of SOCS2 i.e. the binding site of the protein to various ligands, as well-established for the growth hormone receptor GHR. Using surface plasmon resonance we showed that the p.R96C point mutation completely abrogates SOCS2 binding affinity for the phosphopeptide of GHR. Additionally, the size, weight and milk production in p.R96C homozygote sheep, were significantly increased by 24%, 18%, and 4.4%, respectively, when compared to wild type sheep, supporting the view that the point mutation causes a loss of SOCS2 functional activity. Altogether these results provide strong evidence for a causal mutation controlling SCC in sheep and highlight the major role of SOCS2 as a tradeoff between the host's inflammatory response to mammary infections, and body growth and milk production, which are all mediated by the JAK/STAT signaling pathway.

  4. Tipping Point

    Medline Plus

    Full Text Available ... en español Blog About OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by ... danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe ...

  5. Tipping Point

    Medline Plus

    Full Text Available ... OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point ... 24 hours a day. For young children whose home is a playground, it’s the best way to ...

  6. Fixed Points

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

  7. Tipping Point

    Medline Plus

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... see news reports about horrible accidents involving young children and furniture, appliance and tv tip-overs. The ...

  8. Portion size

    Science.gov (United States)

    ... with hummus. To control your portion sizes when eating out, try these tips: Order the small size. Instead of a medium or large, ask for the smallest size. By eating a small hamburger instead of a large, you ...

  9. Analisa Pengaruh Koordinasi Peralatan Proteksi Terhadap Karakteristik Voltage Sag Di PT. Pupuk Kaltim (PKT Bontang

    Directory of Open Access Journals (Sweden)

    Arif Rakhman Prayuga

    2012-09-01

    Full Text Available Program paket merupakan software simulasi transien pada sistem tenaga yang digunakan untuk menganalisa pengujian jaringan listrik di industri pada kondisi saat gangguan. Untuk meneliti karakteristik voltage sag pada sistem jaringan listrik di industri dalam kondisi saat gangguan, digunakan dua metode untuk koordinasi peralatan proteksi. Keluaran dari hasil simulasi berupa kurva transien tegangan terhadap durasi waktu gangguan yang merupakan karakteristik voltage sag. Kurva hasil simulasi ini dievaluasi dengan kurva standar CBEMA, ITIC, dan SEMI yang telah distandarkan untuk performa jaringan. Hasil simulasi hubung singkat 3 fasa di titik Fault 2 menyebabkan tegangan sisa sebesar 88,4 % di tiap fasa, hubung singkat 1 fasa ke tanah sebesar 81,4 % di fasa A, 98,6 % di fasa B, dan 96,2 % di fasa C, hubung singkat antar fasa sebesar 92,6 % di fasa A, 105,9 % di fasa B, 87,6 % di fasa C. Metode kedua yaitu dengan CB atau pemutus dari hasil evaluasi simulasi didapatkan durasi gangguan yang lebih kecil dari metode pertama yaitu tanpa peralatan proteksi.

  10. Green Lot-Sizing

    NARCIS (Netherlands)

    M. Retel Helmrich (Mathijn Jan)

    2013-01-01

    textabstractThe lot-sizing problem concerns a manufacturer that needs to solve a production planning problem. The producer must decide at which points in time to set up a production process, and when he/she does, how much to produce. There is a trade-off between inventory costs and costs associated

  11. Selecting cryptographic key sizes

    OpenAIRE

    Verheul, E. R.; Lenstra, Arjen K.

    2001-01-01

    In this article we offer guidelines for the determination of key sizes for symmetric cryptosystems, RSA, and discrete logarithm-based cryptosystems both over finite fields and over groups of elliptic curves over prime fields. Our recommendations are based on a set of explicitly formulated parameter settings, combined with existing data points about the cryptosystems.

  12. Sustainable Sizing.

    Science.gov (United States)

    Robinette, Kathleen M; Veitch, Daisy

    2016-08-01

    To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

  13. Exploring Size.

    Science.gov (United States)

    Brand, Judith, Ed.

    1995-01-01

    "Exploring" is a magazine of science, art, and human perception that communicates ideas museum exhibits cannot demonstrate easily by using experiments and activities for the classroom. This issue concentrates on size, examining it from a variety of viewpoints. The focus allows students to investigate and discuss interconnections among…

  14. Size matter!

    DEFF Research Database (Denmark)

    Hansen, Pelle Guldborg; Jespersen, Andreas Maaløe; Skov, Laurits Rhoden

    2015-01-01

    the hypothesis that a decrease in the size of food plates may lead to significant reductions in food waste from buffets. It supports and extends the set of circumstances in which a recent experiment found that reduced dinner plates in a hotel chain lead to reduced quantities of leftovers....

  15. Address Points - Allegheny County Address Points 201601

    Data.gov (United States)

    NSGIC Education | GIS Inventory — This dataset contains Address Points in Allegheny County. The Address Points were created by GDR for the Allegheny County CAD project, October 2008. Data is updated...

  16. Rhizosphere size

    Science.gov (United States)

    Kuzyakov, Yakov; Razavi, Bahar

    2017-04-01

    Estimation of the soil volume affected by roots - the rhizosphere - is crucial to assess the effects of plants on properties and processes in soils and dynamics of nutrients, water, microorganisms and soil organic matter. The challenges to assess the rhizosphere size are: 1) the continuum of properties between the root surface and root-free soil, 2) differences in the distributions of various properties (carbon, microorganisms and their activities, various nutrients, enzymes, etc.) along and across the roots, 3) temporal changes of properties and processes. Thus, to describe the rhizosphere size and root effects, a holistic approach is necessary. We collected literature and own data on the rhizosphere gradients of a broad range of physico-chemical and biological properties: pH, CO2, oxygen, redox potential, water uptake, various nutrients (C, N, P, K, Ca, Mg, Mn and Fe), organic compounds (glucose, carboxylic acids, amino acids), activities of enzymes of C, N, P and S cycles. The collected data were obtained based on the destructive approaches (thin layer slicing), rhizotron studies and in situ visualization techniques: optodes, zymography, sensitive gels, 14C and neutron imaging. The root effects were pronounced from less than 0.5 mm (nutrients with slow diffusion) up to more than 50 mm (for gases). However, the most common effects were between 1 - 10 mm. Sharp gradients (e.g. for P, carboxylic acids, enzyme activities) allowed to calculate clear rhizosphere boundaries and so, the soil volume affected by roots. The first analyses were done to assess the effects of soil texture and moisture as well as root system and age on these gradients. The most properties can be described by two curve types: exponential saturation and S curve, each with increasing and decreasing concentration profiles from the root surface. The gradient based distribution functions were calculated and used to extrapolate on the whole soil depending on the root density and rooting intensity. We

  17. Fluctuations in email size

    Science.gov (United States)

    Matsubara, Yoshitsugu; Musashi, Yasuo

    2017-12-01

    The purpose of this study is to explain fluctuations in email size. We have previously investigated the long-term correlations between email send requests and data flow in the system log of the primary staff email server at a university campus, finding that email size frequency follows a power-law distribution with two inflection points, and that the power-law property weakens the correlation of the data flow. However, the mechanism underlying this fluctuation is not completely understood. We collected new log data from both staff and students over six academic years and analyzed the frequency distribution thereof, focusing on the type of content contained in the emails. Furthermore, we obtained permission to collect "Content-Type" log data from the email headers. We therefore collected the staff log data from May 1, 2015 to July 31, 2015, creating two subdistributions. In this paper, we propose a model to explain these subdistributions, which follow log-normal-like distributions. In the log-normal-like model, email senders -consciously or unconsciously- regulate the size of new email sentences according to a normal distribution. The fitting of the model is acceptable for these subdistributions, and the model demonstrates power-law properties for large email sizes. An analysis of the length of new email sentences would be required for further discussion of our model; however, to protect user privacy at the participating organization, we left this analysis for future work. This study provides new knowledge on the properties of email sizes, and our model is expected to contribute to the decision on whether to establish upper size limits in the design of email services.

  18. Myofascial trigger point pain.

    Science.gov (United States)

    Jaeger, Bernadette

    2013-01-01

    Myofascial trigger point pain is an extremely prevalent cause of persistent pain disorders in all parts of the body, not just the head, neck, and face. Features include deep aching pain in any structure, referred from focally tender points in taut bands of skeletal muscle (the trigger points). Diagnosis depends on accurate palpation with 2-4 kg/cm2 of pressure for 10 to 20 seconds over the suspected trigger point to allow the referred pain pattern to develop. In the head and neck region, cervical muscle trigger points (key trigger points) often incite and perpetuate trigger points (satellite trigger points) and referred pain from masticatory muscles. Management requires identification and control of as many perpetuating factors as possible (posture, body mechanics, psychological stress or depression, poor sleep or nutrition). Trigger point therapies such as spray and stretch or trigger point injections are best used as adjunctive therapy.

  19. Point cloud data management (extended abstract)

    NARCIS (Netherlands)

    Van Oosterom, P.J.M.; Ravada, S.; Horhammer, M.; Martinez Rubi, O.; Ivanova, M.; Kodde, M.; Tijssen, T.P.M.

    2014-01-01

    Point cloud data are important sources for 3D geo-information. The point cloud data sets are growing in popularity and in size. Modern Big Data acquisition and processing technologies, such as laser scanning from airborne, mobile, or static platforms, dense image matching from photos, multi-beam

  20. Materialised Ideals Sizes and Beauty

    Directory of Open Access Journals (Sweden)

    Kirsi Laitala

    2011-04-01

    Full Text Available Today’s clothing industry is based on a system where clothes are made in ready-to-wear sizes and meant to fit most people. Studies have pointed out that consumers are discontent with the use of these systems: size designations are not accurate enough to find clothing that fits, and different sizes are poorly available. This article discusses in depth who these consumers are, and which consumer groups are the most dissatisfied with today’s sizing systems. Results are based on a web survey where 2834 Nordic consumers responded, complemented with eight in-depth interviews, market analysis on clothing sizes and in-store trouser size measurements. Results indicate that higher shares of the consumers who have a body out of touch with the existing beauty ideals express discontentment with the sizing systems and the poor selection available. In particular, large women, very large men, and thin, short men are those who experience less priority in clothing stores and have more difficulties in finding clothes that fit. Consumers tend to blame themselves when the clothes do not fit their bodies, while our study points out that the industry is to blame as they do not produce clothing for all customers.

  1. Biological motion distorts size perception

    Science.gov (United States)

    Veto, Peter; Einhäuser, Wolfgang; Troje, Nikolaus F.

    2017-02-01

    Visual illusions explore the limits of sensory processing and provide an ideal testbed to study perception. Size illusions - stimuli whose size is consistently misperceived - do not only result from sensory cues, but can also be induced by cognitive factors, such as social status. Here we investigate, whether the ecological relevance of biological motion can also distort perceived size. We asked observers to judge the size of point-light walkers (PLWs), configurations of dots whose movements induce the perception of human movement, and visually matched control stimuli (inverted PLWs). We find that upright PLWs are consistently judged as larger than inverted PLWs, while static point-light figures do not elicit the same effect. We also show the phenomenon using an indirect paradigm: observers judged the relative size of a disc that followed an inverted PLW larger than a disc following an upright PLW. We interpret this as a contrast effect: The upright PLW is perceived larger and thus the subsequent disc is judged smaller. Together, these results demonstrate that ecologically relevant biological-motion stimuli are perceived larger than visually matched control stimuli. Our findings present a novel case of illusory size perception, where ecological importance leads to a distorted perception of size.

  2. The End of Points

    Science.gov (United States)

    Feldman, Jo

    2018-01-01

    Have teachers become too dependent on points? This article explores educators' dependency on their points systems, and the ways that points can distract teachers from really analyzing students' capabilities and achievements. Feldman argues that using a more subjective grading system can help illuminate crucial information about students and what…

  3. An Emprical Point Error Model for Tls Derived Point Clouds

    Science.gov (United States)

    Ozendi, Mustafa; Akca, Devrim; Topan, Hüseyin

    2016-06-01

    The random error pattern of point clouds has significant effect on the quality of final 3D model. The magnitude and distribution of random errors should be modelled numerically. This work aims at developing such an anisotropic point error model, specifically for the terrestrial laser scanner (TLS) acquired 3D point clouds. A priori precisions of basic TLS observations, which are the range, horizontal angle and vertical angle, are determined by predefined and practical measurement configurations, performed at real-world test environments. A priori precision of horizontal (𝜎𝜃) and vertical (𝜎𝛼) angles are constant for each point of a data set, and can directly be determined through the repetitive scanning of the same environment. In our practical tests, precisions of the horizontal and vertical angles were found as 𝜎𝜃=±36.6𝑐𝑐 and 𝜎𝛼=±17.8𝑐𝑐, respectively. On the other hand, a priori precision of the range observation (𝜎𝜌) is assumed to be a function of range, incidence angle of the incoming laser ray, and reflectivity of object surface. Hence, it is a variable, and computed for each point individually by employing an empirically developed formula varying as 𝜎𝜌=±2-12 𝑚𝑚 for a FARO Focus X330 laser scanner. This procedure was followed by the computation of error ellipsoids of each point using the law of variance-covariance propagation. The direction and size of the error ellipsoids were computed by the principal components transformation. The usability and feasibility of the model was investigated in real world scenarios. These investigations validated the suitability and practicality of the proposed method.

  4. Out-of-plane integration of a multimode optical fiber for single particle/cell detection at multiple points on a microfluidic device with applications to particle/cell counting, velocimetry, size discrimination and the analysis of single cell lysate injections.

    Science.gov (United States)

    Sadeghi, Jalal; Patabadige, Damith E W; Culbertson, Anne H; Latifi, Hamid; Culbertson, Christopher T

    2016-12-20

    In this paper a single particle/cell-tracking microfluidic device that integrates an out-of-plane multimode optical fiber (OP-MMF) is reported. This OP-MMF is used to generate three excitation light-lines and three detection spots using only one excitation source and one detector. It takes advantage of an optical tunneling mode to create two excitation lines in a microfluidic channel emanating from a single fiber end. This method was used to accurately count particles/cells and perform velocity measurements and size discrimination. The velocity and size distributions of 5, 7, and 10 μm fluorescently labeled polystyrene beads were determined using the OP-MMF. Additionally, this method was used to analyze cell lysates with the third excitation line in the separation channel. The OP-MMF setup accurately detected an intact cell twice ∼2 mm prior to lysis, determined its velocity, and detected the injected cell lysate 3 mm downstream of the injection point in the separation channel. Using this setup, the velocity of cells entering the lysis intersection and the absolute migration times of fluorescently labeled analytes injected into the separation channel were determined in an automated fashion. This method enabled us to determine a lysing/injection efficiency coefficient (K) using signals from the injected lysate signal and from the intact cell before lysing. K provided a reliable measurement of the amount of cell lysate that was injected into the separation channel. The approach reported here could be used in the future to track particles, cells or droplets in a variety of existing microfluidic devices without the need for multiplexed masks, layers, bulky optical elements or complex optical designs.

  5. Sensing with Superconducting Point Contacts

    Directory of Open Access Journals (Sweden)

    Argo Nurbawono

    2012-05-01

    Full Text Available Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors.

  6. Metaharmonic Lattice Point Theory

    CERN Document Server

    Freeden, Willi

    2011-01-01

    Metaharmonic Lattice Point Theory covers interrelated methods and tools of spherically oriented geomathematics and periodically reflected analytic number theory. The book establishes multi-dimensional Euler and Poisson summation formulas corresponding to elliptic operators for the adaptive determination and calculation of formulas and identities of weighted lattice point numbers, in particular the non-uniform distribution of lattice points. The author explains how to obtain multi-dimensional generalizations of the Euler summation formula by interpreting classical Bernoulli polynomials as Green

  7. Intron size and genome size in plants.

    Science.gov (United States)

    J. Wendel; R. Cronn; I. Alvarez; B. Liu; R. Small; D. Senchina

    2002-01-01

    It has long been known that genomes vary over a remarkable range of sizes in both plants (Bennett, Cox, and Leitch 1997) and animals (Gregory 2001). It also has become evident that across the broad phylogenetic sweep, genome size may be correlated with intron size (Deutsch and Long 1999; Vinogradov 1999; McLysaght et al. 2000), suggesting that some component of genome...

  8. Interesting Interest Points

    DEFF Research Database (Denmark)

    Aanæs, Henrik; Dahl, Anders Lindbjerg; Pedersen, Kim Steenstrup

    2012-01-01

    Not all interest points are equally interesting. The most valuable interest points lead to optimal performance of the computer vision method in which they are employed. But a measure of this kind will be dependent on the chosen vision application. We propose a more general performance measure bas...

  9. Poisson branching point processes

    International Nuclear Information System (INIS)

    Matsuo, K.; Teich, M.C.; Saleh, B.E.A.

    1984-01-01

    We investigate the statistical properties of a special branching point process. The initial process is assumed to be a homogeneous Poisson point process (HPP). The initiating events at each branching stage are carried forward to the following stage. In addition, each initiating event independently contributes a nonstationary Poisson point process (whose rate is a specified function) located at that point. The additional contributions from all points of a given stage constitute a doubly stochastic Poisson point process (DSPP) whose rate is a filtered version of the initiating point process at that stage. The process studied is a generalization of a Poisson branching process in which random time delays are permitted in the generation of events. Particular attention is given to the limit in which the number of branching stages is infinite while the average number of added events per event of the previous stage is infinitesimal. In the special case when the branching is instantaneous this limit of continuous branching corresponds to the well-known Yule--Furry process with an initial Poisson population. The Poisson branching point process provides a useful description for many problems in various scientific disciplines, such as the behavior of electron multipliers, neutron chain reactions, and cosmic ray showers

  10. Indexing Moving Points

    DEFF Research Database (Denmark)

    Agarwal, Pankaj K.; Arge, Lars Allan; Erickson, Jeff

    2003-01-01

    We propose three indexing schemes for storing a set S of N points in the plane, each moving along a linear trajectory, so that any query of the following form can be answered quickly: Given a rectangle R and a real value t, report all K points of S that lie inside R at time t. We first present an...

  11. Model Breaking Points Conceptualized

    Science.gov (United States)

    Vig, Rozy; Murray, Eileen; Star, Jon R.

    2014-01-01

    Current curriculum initiatives (e.g., National Governors Association Center for Best Practices and Council of Chief State School Officers 2010) advocate that models be used in the mathematics classroom. However, despite their apparent promise, there comes a point when models break, a point in the mathematical problem space where the model cannot,…

  12. Multispectral Image Feature Points

    Directory of Open Access Journals (Sweden)

    Cristhian Aguilera

    2012-09-01

    Full Text Available This paper presents a novel feature point descriptor for the multispectral image case: Far-Infrared and Visible Spectrum images. It allows matching interest points on images of the same scene but acquired in different spectral bands. Initially, points of interest are detected on both images through a SIFT-like based scale space representation. Then, these points are characterized using an Edge Oriented Histogram (EOH descriptor. Finally, points of interest from multispectral images are matched by finding nearest couples using the information from the descriptor. The provided experimental results and comparisons with similar methods show both the validity of the proposed approach as well as the improvements it offers with respect to the current state-of-the-art.

  13. Do acupuncture points exist?

    International Nuclear Information System (INIS)

    Yan Xiaohui; Zhang Xinyi; Liu Chenglin; Dang, Ruishan; Huang Yuying; He Wei; Ding Guanghong

    2009-01-01

    We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

  14. Do acupuncture points exist?

    Energy Technology Data Exchange (ETDEWEB)

    Yan Xiaohui; Zhang Xinyi [Department of Physics, Surface Physics Laboratory (State Key Laboratory), and Synchrotron Radiation Research Center of Fudan University, Shanghai 200433 (China); Liu Chenglin [Physics Department of Yancheng Teachers' College, Yancheng 224002 (China); Dang, Ruishan [Second Military Medical University, Shanghai 200433 (China); Huang Yuying; He Wei [Beijing Synchrotron Radiation Facility, Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100039 (China); Ding Guanghong [Shanghai Research Center of Acupuncture and Meridian, Pudong, Shanghai 201203 (China)

    2009-05-07

    We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian. (note)

  15. Point/Counterpoint

    DEFF Research Database (Denmark)

    Ungar, David; Ernst, Erik

    2007-01-01

    Point Argument: "Dynamic Languages (in Reactive Environments) Unleash Creativity," by David Ungar. For the sake of creativity, the profession needs to concentrate more on inventing new and better dynamic languages and environments and less on improving static languages. Counterpoint Argument...

  16. Bedrock Outcrop Points Compilation

    Data.gov (United States)

    Vermont Center for Geographic Information — A compilation of bedrock outcrops as points and/or polygons from 1:62,500 and 1:24,000 geologic mapping by the Vermont Geological Survey, the United States...

  17. Triple Point Topological Metals

    Directory of Open Access Journals (Sweden)

    Ziming Zhu

    2016-07-01

    Full Text Available Topologically protected fermionic quasiparticles appear in metals, where band degeneracies occur at the Fermi level, dictated by the band structure topology. While in some metals these quasiparticles are direct analogues of elementary fermionic particles of the relativistic quantum field theory, other metals can have symmetries that give rise to quasiparticles, fundamentally different from those known in high-energy physics. Here, we report on a new type of topological quasiparticles—triple point fermions—realized in metals with symmorphic crystal structure, which host crossings of three bands in the vicinity of the Fermi level protected by point group symmetries. We find two topologically different types of triple point fermions, both distinct from any other topological quasiparticles reported to date. We provide examples of existing materials that host triple point fermions of both types and discuss a variety of physical phenomena associated with these quasiparticles, such as the occurrence of topological surface Fermi arcs, transport anomalies, and topological Lifshitz transitions.

  18. National Wetlands Inventory Points

    Data.gov (United States)

    Minnesota Department of Natural Resources — Wetland point features (typically wetlands that are too small to be as area features at the data scale) mapped as part of the National Wetlands Inventory (NWI). The...

  19. Allegheny County Address Points

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset contains address points which represent physical address locations assigned by the Allegheny County addressing authority. Data is updated by County...

  20. Designated Wildlife Lakes - points

    Data.gov (United States)

    Minnesota Department of Natural Resources — This is a point shapefile of Designated Wildlife Lakes in Minnesota. This shapefile was created by converting lake polygons from the Designated Wildlife Lakes...

  1. Arctic climate tipping points.

    Science.gov (United States)

    Lenton, Timothy M

    2012-02-01

    There is widespread concern that anthropogenic global warming will trigger Arctic climate tipping points. The Arctic has a long history of natural, abrupt climate changes, which together with current observations and model projections, can help us to identify which parts of the Arctic climate system might pass future tipping points. Here the climate tipping points are defined, noting that not all of them involve bifurcations leading to irreversible change. Past abrupt climate changes in the Arctic are briefly reviewed. Then, the current behaviour of a range of Arctic systems is summarised. Looking ahead, a range of potential tipping phenomena are described. This leads to a revised and expanded list of potential Arctic climate tipping elements, whose likelihood is assessed, in terms of how much warming will be required to tip them. Finally, the available responses are considered, especially the prospects for avoiding Arctic climate tipping points.

  2. Unconventional Quantum Critical Points

    OpenAIRE

    Xu, Cenke

    2012-01-01

    In this paper we review the theory of unconventional quantum critical points that are beyond the Landau's paradigm. Three types of unconventional quantum critical points will be discussed: (1). The transition between topological order and semiclassical spin ordered phase; (2). The transition between topological order and valence bond solid phase; (3). The direct second order transition between different competing orders. We focus on the field theory and universality class of these unconventio...

  3. Finite Size Scaling of Perceptron

    OpenAIRE

    Korutcheva, Elka; Tonchev, N.

    2000-01-01

    We study the first-order transition in the model of a simple perceptron with continuous weights and large, bit finite value of the inputs. Making the analogy with the usual finite-size physical systems, we calculate the shift and the rounding exponents near the transition point. In the case of a general perceptron with larger variety of inputs, the analysis only gives bounds for the exponents.

  4. Dynamics and mission design near libration points

    CERN Document Server

    Gómez, G; Llibre, J; Martínez, R

    2001-01-01

    It is well known that the restricted three-body problem has triangular equilibrium points. These points are linearly stable for values of the mass parameter, µ , below Routh's critical value, µ 1 . It is also known that in the spatial case they are nonlinearly stable, not for all the initial conditions in a neighborhood of the equilibrium points L 4 , L 5 but for a set of relatively large measures. This follows from the celebrated Kolmogorov-Arnold-Moser theorem. In fact there are neighborhoods of computable size for which one obtains "practical stability" in the sense that the massless partic

  5. Point-of-care biosensor system.

    Science.gov (United States)

    Vasan, Arvind Sai Sarathi; Mahadeo, Dinesh Michael; Doraiswami, Ravi; Huang, Yunhan; Pecht, Michael

    2013-01-01

    Point-of-care biosensor systems can potentially improve patient care through real-time and remote health monitoring. Over the past few decades, research has been conducted in the field of biosensors to detect patterns of biomarkers and provide information on their concentration in biological samples for robust diagnosis. In future point-of-care applications, requirements such as rapid label-free detection, miniaturized sensor size, and portability will limit the types of biosensors that can be used. This paper reviews label-free detection techniques using Biological MicroElectroMechanical Systems as a potential candidate for point-of-care biosensing applications. Furthermore, detailed surveys have been carried out on wireless networking schemes applicable for a point-of-care environment and on prognostic techniques that will enable decision-support services. This paper concludes by providing a list of challenges that must be resolved before realizing biosensor systems for next-generation point-of-care applications.

  6. 3D Object Segmentation of Point Clouds using Profiling Techniques ...

    African Journals Online (AJOL)

    In the automatic processing of point clouds, higher level information in the form of point segments is required for classification and object detection purposes. Segmentation allows for the definition of these segments. Because of the increasing size of point clouds faster and more reliable segmentation methods are being ...

  7. Γ-source Neutral Point Clamped Inverter

    DEFF Research Database (Denmark)

    Mo, Wei; Loh, Poh Chiang; Blaabjerg, Frede

    Transformer based Z-source inverters are recently proposed to achieve promising buck-boost capability. They have improved higher buck-boost capability, smaller size and less components count over Z-source inverters. On the other hand, neutral point clamped inverters have less switching stress...

  8. Size effect in the strength of concrete structures

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Karihaloo's size effect formula are also proposed. Keywords. Fictitious crack model; fracture process zone (FPZ); high strength concrete (HSC); size effect; three point bend (TPB) beam. 1. Introduction. The fracture mechanics size effect, as opposed to the Weibull statistical size effect, is a controversial topic in the fracture of ...

  9. Cloud Point Depressants

    OpenAIRE

    Ali, Hassan

    2012-01-01

    Wax formation and deposition in subsea crude oil piepline is most important problem in cold environments faced by petroleum industry. Significant research is been going on at industrial as well as academic levels to develop additives which are able to break the wax crystal structure or at least weakens it. Addition of cloud point depressants has been found to be an effective way of dealing with waxes. The main focus of this project is chemical control of wax gel formation by using cloud point...

  10. On Effect Size

    Science.gov (United States)

    Kelley, Ken; Preacher, Kristopher J.

    2012-01-01

    The call for researchers to report and interpret effect sizes and their corresponding confidence intervals has never been stronger. However, there is confusion in the literature on the definition of effect size, and consequently the term is used inconsistently. We propose a definition for effect size, discuss 3 facets of effect size (dimension,…

  11. Mechanistic spatio-temporal point process models for marked point processes, with a view to forest stand data

    DEFF Research Database (Denmark)

    Møller, Jesper; Ghorbani, Mohammad; Rubak, Ege Holger

    We show how a spatial point process, where to each point there is associated a random quantitative mark, can be identified with a spatio-temporal point process specified by a conditional intensity function. For instance, the points can be tree locations, the marks can express the size of trees......, and the conditional intensity function can describe the distribution of a tree (i.e., its location and size) conditionally on the larger trees. This enable us to construct parametric statistical models which are easily interpretable and where likelihood-based inference is tractable. In particular, we consider maximum...... likelihood based inference and tests for independence between the points and the marks....

  12. PowerPoint Presentation

    Indian Academy of Sciences (India)

    Table of contents. PowerPoint Presentation · CHANDIPURA VIRUS · Slide 3 · Slide 4 · Slide 5 · VIRUSES · PROPERTIES OF VIRUSES · CLASSIFICATION OF VIRUSES · VIRUS FAMILIES · VIRUS FAMILIES – contd · General Classification · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19.

  13. ACS Zero Point Verification

    Science.gov (United States)

    Dolphin, Andrew

    2005-07-01

    The uncertainties in the photometric zero points create a fundamental limit to the accuracy of photometry. The current state of the ACS calibration is surprisingly poor, with zero point uncertainties of 0.03 magnitudes. The reason for this is that the ACS calibrations are based primarily on semi-emprical synthetic zero points and observations of fields too crowded for accurate ground-based photometry. I propose to remedy this problem by obtaining ACS images of the omega Cen standard field with all nine broadband ACS/WFC filters. This will permit the direct determination of the ACS zero points by comparison with excellent ground-based photometry, and should reduce their uncertainties to less than 0.01 magnitudes. A second benefit is that it will facilitate the comparison of the WFPC2 and ACS photometric systems, which will be important as WFPC2 is phased out and ACS becomes HST's primary imager. Finally, three of the filters will be repeated from my Cycle 12 observations, allowing for a measurement of any change in sensitivity.

  14. Building Temperature Set Point

    Energy Technology Data Exchange (ETDEWEB)

    Meincke, Carol L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Evans, Christopher A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    This white paper provides information and recommendations for an actionable and enforceable corporate policy statement on temperature set points for office and related spaces at Sandia and presents a strategy that balances the need to achieve the energy goals with optimizing employee comfort and productivity.

  15. Point Lepreau generating station

    International Nuclear Information System (INIS)

    Ganong, G.H.D.; Strang, A.E.; Gunter, G.E.; Thompson, T.S.

    Point Lepreau-1 reactor is a 600 MWe generating station expected to be in service by October 1979. New Brunswick is suffering a 'catch up' phenomenon in load growth and needs to decrease dependence on foreign oil. The site is on salt water and extensive study has gone into corrosion control. Project management, financing and scheduling have unique aspects. (E.C.B.)

  16. PowerPoint Presentation

    Indian Academy of Sciences (India)

    Table of contents. PowerPoint Presentation · Slide 2 · Receptor-mediated endocytosis · Slide 4 · Publications – Direct therapeutic approaches · Importance of ECM recognition · Publications – ECM interactions · Slide 8 · L. donovani, when attached to the macrophage surface, behaves like any other microbe which are killed ...

  17. Publication point indicators

    DEFF Research Database (Denmark)

    Elleby, Anita; Ingwersen, Peter

    2010-01-01

    with novel publication point indicators (PPIs) that are formalized and exemplified. Two diachronic citation windows are applied: 2006-07 and 2006-08. Web of Science (WoS) as well as Google Scholar (GS) are applied to observe the cite delay and citedness for the different document types published by DIIS...

  18. Holographic Three point Functions

    DEFF Research Database (Denmark)

    Martirosyan, Ara

    . In the spirit of understanding this problem better, the thesis discusses the divergences appearing in the calculation of structure constants involving two giant and one point-like gravitons in the string theories on AdS_5 x S^5 and AdS_4 x S^7/Z_k backgrounds. Coherent state approach for the tree-level...

  19. New Novae snack point

    CERN Multimedia

    2012-01-01

    Located next to the car park by the flag poles, a few metres from the Main CERN Reception (building 33), a new snack point catered by Novae will open to the public on Wednesday 8 August. More information will be available in the next issue of the Bulletin!

  20. Hillclimbing saddle point inflation

    Science.gov (United States)

    Kawana, Kiyoharu; Sakai, Katsuta

    2018-03-01

    Recently a new inflationary scenario was proposed in [1] which can be applicable to an inflaton having multiple vacua. In this letter, we consider a more general situation where the inflaton potential has a (UV) saddle point around the Planck scale. This class of models can be regarded as a natural generalization of the hillclimbing Higgs inflation [2].

  1. Point kinetics modeling

    International Nuclear Information System (INIS)

    Kimpland, R.H.

    1996-01-01

    A normalized form of the point kinetics equations, a prompt jump approximation, and the Nordheim-Fuchs model are used to model nuclear systems. Reactivity feedback mechanisms considered include volumetric expansion, thermal neutron temperature effect, Doppler effect and void formation. A sample problem of an excursion occurring in a plutonium solution accidentally formed in a glovebox is presented

  2. Point of sale tobacco advertisements in India.

    Science.gov (United States)

    Chaudhry, S; Chaudhry, S; Chaudhry, K

    2007-01-01

    The effect of any legislation depends on its implementation. Limited studies indicate that tobacco companies may tend to use such provision for surrogate advertising. The point of sale advertisement provision has been placed in the Indian Tobacco Control legislation. The study was undertaken to assess the Indian scenario in this regard. To assess if there are any violations related to provision of point of tobacco sale advertisements under India's comprehensive tobacco Control legislation in different parts of India. Boards over various shops showing advertisements of tobacco products were observed in the cities of Delhi, Mumbai, Kolkata, Trivandrum and Jaipur, between September 2005 and March 2006. The point of sale advertisements mushroomed after the implementation of 2004 tobacco control legislation. Tobacco advertisement boards fully satisfying the point of sale provision were practically non-existent. The most common violation of point of sale advertisements was the larger size of the board but with tobacco advertisement equal to the size indicated in the legislation and remaining area often showing a picture. Invariably two boards were placed together to provide the impression of a large single repetitive advertisement. More than two boards was not common. Tobacco advertisement boards were also observed on closed shops/ warehouses, shops not selling tobacco products and on several adjacent shops. The purpose of the point of sale advertisements seems to be surrogate advertisement of tobacco products, mainly cigarettes.

  3. Point of Care Ultrasound

    DEFF Research Database (Denmark)

    Dietrich, Christoph F; Goudie, Adrian; Chiorean, Liliana

    2017-01-01

    Over the last decade, the use of portable ultrasound scanners has enhanced the concept of point of care ultrasound (PoC-US), namely, "ultrasound performed at the bedside and interpreted directly by the treating clinician." PoC-US is not a replacement for comprehensive ultrasound, but rather allow...... and critical care medicine, cardiology, anesthesiology, rheumatology, obstetrics, neonatology, gynecology, gastroenterology and many other applications. In the future, PoC-US will be more diverse than ever and be included in medical student training.......Over the last decade, the use of portable ultrasound scanners has enhanced the concept of point of care ultrasound (PoC-US), namely, "ultrasound performed at the bedside and interpreted directly by the treating clinician." PoC-US is not a replacement for comprehensive ultrasound, but rather allows...

  4. Precise Point Positioning

    DEFF Research Database (Denmark)

    Zhang, Xiaohong

    performance of point positioning for kinematic applications, the precise point positioning attracted a lot of attention and opened a new alternative door to kinematic positioning. In this report different tests have been done to evaluate the ability and accuracy of the software TriP in the kinematic...... and static case by using internal consistency (residuals, RMS, repeatability etc.), known coordinates, ground truth and double-differenced solutions. The kinematic GPS positioning accuracy using four different software systems has been investigated and tested by comparing the degree of agreement between...... the airborne lidar system misalignment angle by automating the matching of lidar data with ground truth. Kinematic GPS positioning has been widely used, but the available commercial software systems are normally only suitable for the short or medium range kinematic baseline. However, in polar areas, airborne...

  5. Point clouds in BIM

    Science.gov (United States)

    Antova, Gergana; Kunchev, Ivan; Mickrenska-Cherneva, Christina

    2016-10-01

    The representation of physical buildings in Building Information Models (BIM) has been a subject of research since four decades in the fields of Construction Informatics and GeoInformatics. The early digital representations of buildings mainly appeared as 3D drawings constructed by CAD software, and the 3D representation of the buildings was only geometric, while semantics and topology were out of modelling focus. On the other hand, less detailed building representations, with often focus on ‘outside’ representations were also found in form of 2D /2,5D GeoInformation models. Point clouds from 3D laser scanning data give a full and exact representation of the building geometry. The article presents different aspects and the benefits of using point clouds in BIM in the different stages of a lifecycle of a building.

  6. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · HABITAT TYPES & PRIMATE GROUPS · Slide 8 · Slide 9 · TOPOGRAPHY OF KARNATAKA · SOUTHERN PLATEAU · Slide 13 · Slide 14 · WESTERN GHATS · Slide 16 · Slide 17 · LARGE SQUIRRELS · Slide 19 · OPEN PLAINS · Slide 21 · Slide 22.

  7. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · Slide 3 · Getting Smart with Smart Windows! Slide 5 · Energy Crisis!! Total World Primary Energy Supply · “We Ride on Water!” Volume for storage of 4 kg H2 in different states · Slide 10 · Linkers make a Difference! Coordination Polymers · Principle Behind Formation of MOFs · Slide 14.

  8. PowerPoint Presentation

    Indian Academy of Sciences (India)

    Table of contents. PowerPoint Presentation · Slide 2 · Distribution of viral encephalitis · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Status dystonicus in Japanese encephalitis.

  9. PowerPoint Presentation

    Indian Academy of Sciences (India)

    Table of contents. PowerPoint Presentation · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Slide 24 · Slide 25.

  10. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Planck CMB sky map · Slide 9 · Planck Angular power spectrum · CMB Polarization spectra · Slide 12 · Slide 13 · Cosmological Parameters · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Hemispherical asymmetry · Modulation model of SI ...

  11. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · The Heat Engine of the Earth · Slide 4 · Volcanoes at various settings · Slide 6 · Why study carbonatites? Uniqueness of Carbonatites · Origin of Carbonatites · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Primary Objectives · Methods/Tracers Used · Slide 16 · Slide 17 · Slide 18 · Slide 19.

  12. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · Slide 3 · Demands for Space Transportation Systems for the next 30 years · Slide 5 · Slide 6 · Launch demand & costs · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Slide 24.

  13. Mise au point

    African Journals Online (AJOL)

    7 mai 2012 ... cervico-thoracique confirme l'existence d'un goitre plon- geant aux dépens du lobe droit restant à 15 mm de la crosse aortique associé à un processus expansif tissulai- ... DU CANCER DIFFERENCIE DE LA ThYROIDE. R. BEN M'hAMED et al. Journal ORL N°26 .ai:Mise au point 07/05/12 09:45 page54 ...

  14. Critical point predication device

    International Nuclear Information System (INIS)

    Matsumura, Kazuhiko; Kariyama, Koji.

    1996-01-01

    An operation for predicting a critical point by using a existent reverse multiplication method has been complicated, and an effective multiplication factor could not be plotted directly to degrade the accuracy for the prediction. The present invention comprises a detector counting memory section for memorizing the counting sent from a power detector which monitors the reactor power, a reverse multiplication factor calculation section for calculating the reverse multiplication factor based on initial countings and current countings of the power detector, and a critical point prediction section for predicting the criticality by the reverse multiplication method relative to effective multiplication factors corresponding to the state of the reactor core previously determined depending on the cases. In addition, a reactor core characteristic calculation section is added for analyzing an effective multiplication factor depending on the state of the reactor core. Then, if the margin up to the criticality is reduced to lower than a predetermined value during critical operation, an alarm is generated to stop the critical operation when generation of a period of more than a predetermined value predicted by succeeding critical operation. With such procedures, forecasting for the critical point can be easily predicted upon critical operation to greatly mitigate an operator's burden and improve handling for the operation. (N.H.)

  15. Size and Political Participation

    DEFF Research Database (Denmark)

    Lassen, David Dreyer; Serritzlew, Søren

    This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size.......This paper uses a novel research design to re-examine the causal effect of jurisdiction size on political participation. Two waves of municipal consolidation in Denmark, in 1970 and in 2005, provide exogenous variation in jurisdiction size....

  16. Bra sizing and fit

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2007-01-01

    It is often reported that 70% or more of the women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  17. Bra sizing and fit

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2008-01-01

    It is often reported that 70% or more of the women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  18. Tipping point leadership.

    Science.gov (United States)

    Kim, W Chan; Mauborgne, Renée

    2003-04-01

    When William Bratton was appointed police commissioner of New York City in 1994, turf wars over jurisdiction and funding were rife and crime was out of control. Yet in less than two years, and without an increase in his budget, Bratton turned New York into the safest large city in the nation. And the NYPD was only the latest of five law-enforcement agencies Bratton had turned around. In each case, he succeeded in record time despite limited resources, a demotivated staff, opposition from powerful vested interests, and an organization wedded to the status quo. Bratton's turnarounds demonstrate what the authors call tipping point leadership. The theory of tipping points hinges on the insight that in any organization, fundamental changes can occur quickly when the beliefs and energies of a critical mass of people create an epidemic movement toward an idea. Bratton begins by overcoming the cognitive hurdles that block organizations from recognizing the need for change. He does this by putting managers face-to-face with operational problems. Next, he manages around limitations on funds, staff, or equipment by concentrating resources on the areas that are most in need of change and that have the biggest payoffs. He meanwhile solves the motivation problem by singling out key influencers--people with disproportionate power due to their connections or persuasive abilities. Finally, he closes off resistance from powerful opponents. Not every CEO has the personality to be a Bill Bratton, but his successes are due to much more than his personality. He relies on a remarkably consistent method that any manager looking to turn around an organization can use to overcome the forces of inertia and reach the tipping point.

  19. PowerPoint Presentation

    Indian Academy of Sciences (India)

    Table of contents. PowerPoint Presentation · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Metal Oxides: Range of properties · Slide 9 · Slide 10 · Slide 11 · Slide 12 · Slide 13 · Slide 14 · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Slide 24 · Slide 25 · Slide 26 · Slide 27.

  20. PowerPoint Presentation

    Indian Academy of Sciences (India)

    PowerPoint Presentation · Slide 2 · Slide 3 · Slide 4 · Slide 5 · Slide 6 · Slide 7 · Slide 8 · Slide 9 · Slide 10 · Slide 11 · Slide 12 · 2-D Aromaticity · Condensed Aromatics and Hückel Rule · Slide 15 · Slide 16 · Slide 17 · Slide 18 · Slide 19 · Slide 20 · Slide 21 · Slide 22 · Slide 23 · Slide 24 · Slide 25 · Slide 26 · Slide 27 · Slide 28.

  1. Mise au point

    African Journals Online (AJOL)

    tomie est replacé et fixé par des fils d'acier, krönlein lais- sait ce fragment pédiculé au fascia temporalis afin d'évi- ter la dépression de la fosse temporale due à la désinser- tion du muscle temporal [20] ; dans notre série, après reconstitution du cadre, le muscle temporal est suturé à son point d'insertion. pour les tumeurs ...

  2. The point on.

    International Nuclear Information System (INIS)

    1996-01-01

    In this last article, we find the point of view about the world petroleum activity, the reserves and the recent discoveries, the deep offshore, the technological developments in petroleum upstream. The petroleum situation in China is treated. The trends of world refining are described. The recent technological developments in the petroleum downstream are detailed. The prices of crude oil and the refining margins are the subject of a chapter. The investments of hydrocarbons area are given, the world trade and the lng projects, the gas availability in Western Europe have their place. The trends of European automobile industry and the fuels distribution are also discussed. (N.C.)

  3. Torsades de Pointes

    Directory of Open Access Journals (Sweden)

    Richard J Chen, MD

    2018-04-01

    Full Text Available History of present illness: 70-year-old male with a history ventricular arrhythmia, AICD (automated implantable cardioverter defibrillator, coronary artery disease and cardiac stents presented to the Emergency Department after three AICD discharges with dyspnea but no chest pain. During triage, he was found to have an irregular radial pulse and was placed on a cardiac monitor. Significant findings: The patient was found to be in a polymorphic ventricular tachycardia; he was alert, awake and asymptomatic. A rhythm strip showed a wide complex tachycardia with the QRS complex varying in amplitude around the isoelectric line consistent with Torsades de Pointes. Discussion: Torsades de Pointes (TdP is a specific type of polymorphic ventricular tachycardia. The arrhythmia’s characteristic morphology consists of the QRS complex “twisting” around the isoelectric line with gradual variation of the amplitude, reflecting its literal translation of “twisting of the points.”1 This arrhythmia occurs in the context of prolonged QT. The most common form of acquired QT prolongation is medication induced. Common causes include antiarrhythmics, antipsychotics, antiemetics, and antibiotics.2 Patient specific risk factors include female sex, bradycardia, hypokalemia, hypomagnesemia, hypocalcemia, hypothermia and heart disease.3 In the setting of prolonged QT, the repolarization phase is extended. TdP is initiated when a PVC (premature ventricular contraction occurs during this repolarization, known as an ‘R on T’ phenomenon. TdP is often asymptomatic and self-limited. The danger in TdP is its potential to deteriorate into ventricular fibrillation. A mainstay of management of TdP is prevention of risk factors when possible.4 Unstable patients should be treated with synchronized cardioversion. Magnesium sulfate should be administered in all cases of TdP.1 If a patient is not responsive to magnesium, consider isoproterenol, amiodarone, and overdrive

  4. Measuring fire size in tunnels

    International Nuclear Information System (INIS)

    Guo, Xiaoping; Zhang, Qihui

    2013-01-01

    A new measure of fire size Q′ has been introduced in longitudinally ventilated tunnel as the ratio of flame height to the height of tunnel. The analysis in this article has shown that Q′ controls both the critical velocity and the maximum ceiling temperature in the tunnel. Before the fire flame reaches tunnel ceiling (Q′ 1.0), Fr approaches a constant value. This is also a well-known phenomenon in large tunnel fires. Tunnel ceiling temperature shows the opposite trend. Before the fire flame reaches the ceiling, it increases very slowly with the fire size. Once the flame has hit the ceiling of tunnel, temperature rises rapidly with Q′. The good agreement between the current prediction and three different sets of experimental data has demonstrated that the theory has correctly modelled the relation among the heat release rate of fire, ventilation flow and the height of tunnel. From design point of view, the theoretical maximum of critical velocity for a given tunnel can help to prevent oversized ventilation system. -- Highlights: • Fire sizing is an important safety measure in tunnel design. • New measure of fire size a function of HRR of fire, tunnel height and ventilation. • The measure can identify large and small fires. • The characteristics of different fire are consistent with observation in real fires

  5. Relative Critical Points

    Directory of Open Access Journals (Sweden)

    Debra Lewis

    2013-05-01

    Full Text Available Relative equilibria of Lagrangian and Hamiltonian systems with symmetry are critical points of appropriate scalar functions parametrized by the Lie algebra (or its dual of the symmetry group. Setting aside the structures – symplectic, Poisson, or variational – generating dynamical systems from such functions highlights the common features of their construction and analysis, and supports the construction of analogous functions in non-Hamiltonian settings. If the symmetry group is nonabelian, the functions are invariant only with respect to the isotropy subgroup of the given parameter value. Replacing the parametrized family of functions with a single function on the product manifold and extending the action using the (coadjoint action on the algebra or its dual yields a fully invariant function. An invariant map can be used to reverse the usual perspective: rather than selecting a parametrized family of functions and finding their critical points, conditions under which functions will be critical on specific orbits, typically distinguished by isotropy class, can be derived. This strategy is illustrated using several well-known mechanical systems – the Lagrange top, the double spherical pendulum, the free rigid body, and the Riemann ellipsoids – and generalizations of these systems.

  6. Referential Zero Point

    Directory of Open Access Journals (Sweden)

    Matjaž Potrč

    2016-04-01

    Full Text Available Perhaps the most important controversy in which ordinary language philosophy was involved is that of definite descriptions, presenting referential act as a community-involving communication-intention endeavor, thereby opposing the direct acquaintance-based and logical proper names inspired reference aimed at securing truth conditions of referential expression. The problem of reference is that of obtaining access to the matters in the world. This access may be forthcoming through the senses, or through descriptions. A review of how the problem of reference is handled shows though that one main practice is to indulge in relations of acquaintance supporting logical proper names, demonstratives, indexicals and causal or historical chains. This testifies that the problem of reference involves the zero point, and with it phenomenology of intentionality. Communication-intention is but one dimension of rich phenomenology that constitutes an agent’s experiential space, his experiential world. Zero point is another constitutive aspect of phenomenology involved in the referential relation. Realizing that the problem of reference is phenomenology based opens a new perspective upon the contribution of analytical philosophy in this area, reconciling it with continental approach, and demonstrating variations of the impossibility related to the real. Chromatic illumination from the cognitive background empowers the referential act, in the best tradition of ordinary language philosophy.

  7. Bright point study

    International Nuclear Information System (INIS)

    Tang, F.; Harvey, K.; Bruner, M.; Kent, B.; Antonucci, E.

    1982-01-01

    Transition region and coronal observations of bright points by instruments aboard the Solar Maximum Mission and high resolution photospheric magnetograph observations on September 11, 1980 are presented. A total of 31 bipolar ephemeral regions were found in the photosphere from birth in 9.3 hours of combined magnetograph observations from three observatories. Two of the three ephemeral regions present in the field of view of the Ultraviolet Spectrometer-Polarimeter were observed in the C IV 1548 line. The unobserved ephemeral region was determined to be the shortest-lived (2.5 hr) and lowest in magnetic flux density (13G) of the three regions. The Flat Crystal Spectrometer observed only low level signals in the O VIII 18.969 A line, which were not statistically significant to be positively identified with any of the 16 ephemeral regions detected in the photosphere. In addition, the data indicate that at any given time there lacked a one-to-one correspondence between observable bright points and photospheric ephemeral regions, while more ephemeral regions were observed than their counterparts in the transition region and the corona

  8. Critical Point Dryer: Tousimis 916B Series C

    Data.gov (United States)

    Federal Laboratory Consortium — Description:CORAL Name: Critical Point DryerThis system utilizes CO 2to dry fragile suspended and floating structures Specifications / Capabilities:Wafer size up to...

  9. The Point Mass Concept

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2011-04-01

    Full Text Available A point-mass concept has been elaborated from the equations of the gravitational field. One application of these deductions results in a black hole configuration of the Schwarzschild type, having no electric charge and no angular momentum. The critical mass of a gravitational collapse with respect to the nuclear binding energy is found to be in the range of 0.4 to 90 solar masses. A second application is connected with the spec- ulation about an extended symmetric law of gravitation, based on the options of positive and negative mass for a particle at given positive energy. This would make masses of equal polarity attract each other, while masses of opposite polarity repel each other. Matter and antimatter are further proposed to be associated with the states of positive and negative mass. Under fully symmetric conditions this could provide a mechanism for the separation of antimatter from matter at an early stage of the universe.

  10. The Temporal Tipping Point

    DEFF Research Database (Denmark)

    Hermann, A. K.

    2016-01-01

    “Slow journalism” is a term anthropologist and sociologists sometimes use to describe their empirical work, ethnography. To journalists and media observers, meanwhile, “slow journalism” signifies a newfound dedication to serious long-form journalism. Not surprisingly, thus, “ethnographic journalism......”—a genre where reporters adopt research strategies from social science—takes “slow” to the extreme. Immersing themselves in communities for weeks, months and years, ethnographic journalists seek to gain what anthropologists call “the native's point of view”. Based on in-depth interviews with practitioners...... and analyses of their journalistic works, this paper offers a study of ethnographic journalism suggesting that slow time operates in at least three separate registers. First, in terms of regimentation, ethnographic journalism is mostly long-form pieces that demand time-consuming research and careful writing...

  11. Critical Points of Contact

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Morelli, Nicola

    2011-01-01

    In contemporary urban societies multiple networks and systems interact, overlap, exist in parallel, converge, conflict etc. creating unforeseen complexity and less transparency. By exploring how layered networks of physical movement, service information, goods delivery, commercial communication etc....... are connected (and disconnected) we get a much better understanding of how to design and intervene regardless if we are thinking about public spaces in the city or new systems of service design. The many networks orchestrating and facilitating contemporary everyday life are dependent on the strategic sites...... where the networks meet and establish contact. Thus we argue for the usefulness of the notion of Critical Point of Contact (CPC) to deepen our understanding of the actual life within networks. En route to this notion we draw upon theories within as diverse realms such as interaction design, service...

  12. Point Pollution Sources Dimensioning

    Directory of Open Access Journals (Sweden)

    Georgeta CUCULEANU

    2011-06-01

    Full Text Available In this paper a method for determining the main physical characteristics of the point pollution sources is presented. It can be used to find the main physical characteristics of them. The main physical characteristics of these sources are top inside source diameter and physical height. The top inside source diameter is calculated from gas flow-rate. For reckoning the physical height of the source one takes into account the relation given by the proportionality factor, defined as ratio between the plume rise and physical height of the source. The plume rise depends on the gas exit velocity and gas temperature. That relation is necessary for diminishing the environmental pollution when the production capacity of the plant varies, in comparison with the nominal one.

  13. Latent myofascial trigger points.

    Science.gov (United States)

    Ge, Hong-You; Arendt-Nielsen, Lars

    2011-10-01

    A latent myofascial trigger point (MTP) is defined as a focus of hyperirritability in a muscle taut band that is clinically associated with local twitch response and tenderness and/or referred pain upon manual examination. Current evidence suggests that the temporal profile of the spontaneous electrical activity at an MTP is similar to focal muscle fiber contraction and/or muscle cramp potentials, which contribute significantly to the induction of local tenderness and pain and motor dysfunctions. This review highlights the potential mechanisms underlying the sensory-motor dysfunctions associated with latent MTPs and discusses the contribution of central sensitization associated with latent MTPs and the MTP network to the spatial propagation of pain and motor dysfunctions. Treating latent MTPs in patients with musculoskeletal pain may not only decrease pain sensitivity and improve motor functions, but also prevent latent MTPs from transforming into active MTPs, and hence, prevent the development of myofascial pain syndrome.

  14. The Point Mass Concept

    Directory of Open Access Journals (Sweden)

    Lehnert B.

    2011-04-01

    Full Text Available A point-mass concept has been elaborated from the equations of the gravitational field. One application of these deductions results in a black hole configuration of the Schwarzschild type, having no electric charge and no angular momentum. The critical mass of a gravitational collapse with respect to the nuclear binding energy is found to be in the range of 0.4 to 90 solar masses. A second application is connected with the speculation about an extended symmetric law of gravitation, based on the options of positive and negative mass for a particle at given positive energy. This would make masses of equal polarity attract each other, while masses of opposite polarity repel each other. Matter and antimatter are further proposed to be associated with the states of positive and negative mass. Under fully symmetric conditions this could provide a mechanism for the separation of antimatter from matter at an early stage of the universe.

  15. Critical Points of Contact

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Wind, Simon; Lanng, Ditte Bendix

    2012-01-01

    student studios made at the 1st semester of the Urban Design Master Programme in the fall of 2009 and 2010. The CPC concept is double edged since it both provides the stepping-stone for analysis as well as scaffolding for intervention and re-design. Thereby, it fits the underlying philosophy of teaching......In this brief article, we shall illustrate the application of the analytical and interventionist concept of ‘Critical Points of Contact’ (CPC) through a number of urban design studios. The notion of CPC has been developed over a span of the last three to four years and is reported in more detail...... elsewhere (Jensen & Morelli 2011). In this article, we will only discuss the conceptual and theoretical framing superficially, since our real interest is to show and discuss the concept's application value to spatial design in a number of urban design studios. The 'data' or the projects presented are seven...

  16. Intrinsic point defects in aluminum antimonide

    OpenAIRE

    Åberg, Daniel; Erhart, Paul; Williamson, Andrew J.; Lordi, Vincenzo

    2010-01-01

    Calculations within density functional theory on the basis of the local density approximation are carried out to study the properties of intrinsic point defects in aluminum antimonide. Special care is taken to address finite-size effects, band gap error, and symmetry reduction in the defect structures. The correction of the band gap is based on a set of GW calculations. The most important defects are identified to be the aluminum interstitial $Al_{i,Al}^{1+}$, the antimony antisites $Sb_{Al}^...

  17. Relationships between melting point and boiling point of organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Yalkowsky, S.H.; Krzyzaniak, J.F.; Myrdal, P.B. (Univ. of Arizona, Tucson, AZ (United States). College of Pharmacy)

    1994-07-01

    Relationships between melting point and boiling point are shown to be dependent upon the molecular symmetry number and a modified count of the total number of atoms in the molecule. Using the above relationships, the boiling and melting points of nearly 1,000 non-hydrogen-bonding organic compounds have been correlated. The correlations for boiling point and melting point have root mean square errors of 28 and 36 C, respectively.

  18. May 2002 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from Dana Point to Point La...

  19. September 2002 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from Dana Point to Point La...

  20. Phylogenetic effective sample size.

    Science.gov (United States)

    Bartoszek, Krzysztof

    2016-10-21

    In this paper I address the question-how large is a phylogenetic sample? I propose a definition of a phylogenetic effective sample size for Brownian motion and Ornstein-Uhlenbeck processes-the regression effective sample size. I discuss how mutual information can be used to define an effective sample size in the non-normal process case and compare these two definitions to an already present concept of effective sample size (the mean effective sample size). Through a simulation study I find that the AICc is robust if one corrects for the number of species or effective number of species. Lastly I discuss how the concept of the phylogenetic effective sample size can be useful for biodiversity quantification, identification of interesting clades and deciding on the importance of phylogenetic correlations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Yield point of metallic glass

    International Nuclear Information System (INIS)

    Shimizu, Futoshi; Ogata, Shigenobu; Li, Ju

    2006-01-01

    Shear bands form in most bulk metallic glasses (BMGs) within a narrow range of uniaxial strain ε y ≅ 2%. We propose this critical condition corresponds to embryonic shear band (ESB) propagation, not its nucleation. To propagate an ESB, the far-field shear stress τ ∞ ∼ Eε y /2 must exceed the quasi-steady-state glue traction τ glue of shear-alienated glass until the glass transition temperature is approached internally due to frictional heating, at which point ESB matures as a runaway shear crack. The incubation length scale l inc necessary for this maturation is estimated to be ∼10 2 nm for Zr-based BMGs, below which sample size-scale shear localization does not happen. In shear-alienated glass, the last resistance against localized shearing comes from extremely fast downhill dissipative dynamics of timescale comparable to atomic vibrations, allowing molecular dynamics (MD) simulations to capture this recovery process which governs τ glue . We model four metallic glasses: a binary Lennard-Jones system, two binary embedded atom potential systems and a quinternary embedded atom system. Despite vast differences in the structure and interatomic interactions, the four MD calculations give ε y predictions of 2.4%, 2.1%, 2.6% and 2.9%, respectively

  2. Function Point Analysis Depot

    Science.gov (United States)

    Muniz, R.; Martinez, El; Szafran, J.; Dalton, A.

    2011-01-01

    The Function Point Analysis (FPA) Depot is a web application originally designed by one of the NE-C3 branch's engineers, Jamie Szafran, and created specifically for the Software Development team of the Launch Control Systems (LCS) project. The application consists of evaluating the work of each developer to be able to get a real estimate of the hours that is going to be assigned to a specific task of development. The Architect Team had made design change requests for the depot to change the schema of the application's information; that information, changed in the database, needed to be changed in the graphical user interface (GUI) (written in Ruby on Rails (RoR and the web service/server side in Java to match the database changes. These changes were made by two interns from NE-C, Ricardo Muniz from NE-C3, who made all the schema changes for the GUI in RoR and Edwin Martinez, from NE-C2, who made all the changes in the Java side.

  3. Five points on columns

    Directory of Open Access Journals (Sweden)

    Kathleen S Rockland

    2010-06-01

    Full Text Available Abstract “Column,” like “gene,” has both conceptual and linguistic shortcomings. The simple question “what is a column” is not easy to answer and the word itself is not easy to replace. In the present article, I have selected five points, in no way comprehensive or canonical, but which may nevertheless serve as a prompt and aid for further discussions and reevaluation. These are: that anatomical columns are not solid structures, that they are part of locally interdigitating systems, that any delimited column also participates in a widely distributed network, that columns are not an obligatory cortical feature, and that columns (as “modules” occur widely in the brain in non-cortical structures. I focus on the larger scale macrocolumns, mainly from an anatomical perspective. My position is that cortical organization is inherently dynamic and likely to incorporate multiple processing styles. One can speculate that the distributed mappings within areas like piriform cortex may resemble at least one mode of neocortical processing strategy.

  4. ATLAS Point 1 Construction

    CERN Multimedia

    Inigo-Golfin, J

    After 3 years of work in point 1, a number of surface buildings have already been completed and handed over to CERN (the control, the gas and the cooling and ventilation buildings) and, probably more appealing to the public, 60,000 m3 of earth have already been excavated from underground. At present, the technical cavern USA15 and its access shaft are almost finished, leaving only the main cavern and the liaison galleries to be completed in the coming year and a half. The main cavern has been excavated down to the radiation limit and its walls and vault will presently be concreted (see below the picture of the section of the vault with the impressive shell of 1.2 m thickness). The excavation of the bench (27 vertical metres to go yet!) will proceed from August, when some additional civil engineering work in the LHC tunnel will be undertaken. Needless to say many different services are necessary around the detector, both for its installation and future operation for physics. To that end much of the heavy...

  5. Point 1 Updates

    CERN Multimedia

    Inigo-Golfin, J.

    The ATLAS experimental area is located in Point 1, just across the main CERN entrance, in the commune of Meyrin. There people are ever so busy to finish the different infrastructures for ATLAS. Not only has Civil Engineering finished the construction of the USA15 technical cavern, but the excavation of the main UX15 cavern has resumed below the machine tunnel, after a brief halt to allow the construction of the UJ-caverns for the power converters of the LHC machine. The excavation work should end in August 2002. The UX15 hand-over to ATLAS is expected in April 2003. On the surface civil engineering is starting to complete the last two surface buildings (SDX1 and SH1), once the services (cooling pipes, ventilation ducts and the largest item, the lift modules and its lift of course) in the shaft PX15 have been completed. But the civil engineering is not all. A lot more is under way. The site installation of the steel structures in the caverns is to begin in Autumn, along with all the cooling pipes, airconditi...

  6. Rational points on varieties

    CERN Document Server

    Poonen, Bjorn

    2017-01-01

    This book is motivated by the problem of determining the set of rational points on a variety, but its true goal is to equip readers with a broad range of tools essential for current research in algebraic geometry and number theory. The book is unconventional in that it provides concise accounts of many topics instead of a comprehensive account of just one-this is intentionally designed to bring readers up to speed rapidly. Among the topics included are Brauer groups, faithfully flat descent, algebraic groups, torsors, étale and fppf cohomology, the Weil conjectures, and the Brauer-Manin and descent obstructions. A final chapter applies all these to study the arithmetic of surfaces. The down-to-earth explanations and the over 100 exercises make the book suitable for use as a graduate-level textbook, but even experts will appreciate having a single source covering many aspects of geometry over an unrestricted ground field and containing some material that cannot be found elsewhere. The origins of arithmetic (o...

  7. "Point de suspension"

    CERN Document Server

    2004-01-01

    CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This wondrous show in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local population. There will be three perfo...

  8. "Point de suspension"

    CERN Multimedia

    2004-01-01

    http://www.cern.ch/cern50/ CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This wondrous show in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local pop...

  9. "Point de suspension"

    CERN Document Server

    2004-01-01

    CERN - Globe of Science and Innovation 20 and 21 October Acrobatics, mime, a cappella singing, projections of images, a magical setting... a host of different tools of a grandeur matching that of the Universe they relate. A camera makes a massive zoom out to reveal the multiple dimensions of Nature. Freeze the frame: half way between the infinitesimally small and the infinitesimally large, a man suspends his everyday life (hence the title "Point de Suspension", which refers to the three dots at the end of an uncompleted sentence) to take a glimpse of the place he occupies in the great history of the Universe. An unusual perspective on what it means to be a human being... This spectacle in the Globe of Science and Innovation, specially created by the Miméscope* company for the official ceremony marking CERN's fiftieth anniversary, is a gift from the Government of the Republic and Canton of Geneva, which also wishes to share this moment of wonder with the local population. There will be three performances for...

  10. Economies of Size in Production Agriculture.

    Science.gov (United States)

    Duffy, Michael

    2009-07-01

    Economies of size refer to the ability of a farm to lower costs of production by increasing production. Agriculture production displays an L-shaped average cost curve where costs are lower initially but reach a point where no further gains are achieved. Spreading fixed costs, bulk purchases, and marketing power are cited as reasons for economies of size. Labor-reducing technologies may be the primary reason. Most studies do not include the external costs from prophylactic antibiotic use, impact on rural communities, and environmental damage associated with large-scale production. These can contribute to the economies of size.

  11. Size makes a difference

    DEFF Research Database (Denmark)

    Matthiessen, Jeppe; Fagt, Sisse; Biltoft-Jensen, Anja Pia

    2003-01-01

    items was obtained from a 4-day weighed food record (Study 1). Trends in portion sizes of commercial foods were examined by gathering information from major food manufacturers and fast food chains (Study 2). Data on intakes and sales of sugar-sweetened soft drinks and confectionery were obtained through...... content. As a result, almost the same amounts of energy and fat were consumed both ways, with the exception of sliced cold meat (energy and fat) and milk (fat). Study 2: Portion sizes of commercial energy-dense foods and beverages, and fast food meals rich in fat and/or added sugars, seem to have......Objective: To elucidate status and trends in portion size of foods rich in fat and/or added sugars during the past decades, and to bring portion size into perspective in its role in obesity and dietary guidelines in Denmark. Data sources: Information about portion sizes of low-fat and full-fat food...

  12. Sample size methodology

    CERN Document Server

    Desu, M M

    2012-01-01

    One of the most important problems in designing an experiment or a survey is sample size determination and this book presents the currently available methodology. It includes both random sampling from standard probability distributions and from finite populations. Also discussed is sample size determination for estimating parameters in a Bayesian setting by considering the posterior distribution of the parameter and specifying the necessary requirements. The determination of the sample size is considered for ranking and selection problems as well as for the design of clinical trials. Appropria

  13. Economic development and family size.

    Science.gov (United States)

    Rios, R J

    1991-01-01

    The demographic transition in Latin America has resulted in increased family size rather than the Western European model of reduced family size. In 1905, both fertility and mortality were high in Latin America, but mortality declined more rapidly in Latin America than in Europe. In 1905, the crude birth rate for 15 selected countries averaged 44/1000 population. Western fertility at a comparable transition point was much lower at 30/1000. Between 1905 and 1960, fertility declines were evident in Uruguay, Argentina, Cuba, and Chile. Between 1960 and 1985, fertility declines appeared in Costa Rica, Panama, Brazil, and Colombia. Fertility declines were smaller in the other Latin American countries. Crude birth rates declined markedly by 1985 but may overestimate fertility decline, which is more accurately measured by standardized birth rates. Fertility decline was evident in Argentina, Chile, and Costa Rica for standardized birth rates, survivorship ratio, and births surviving past the age of 15 years. Theoretically, families are expected to reduce family size when survivorship is assured; when mortality is 25%, only four children need be planned instead of six when mortality is 50%. A result of falling mortality is a cheaper cost of producing children, which may stimulate parents to raise bigger families. Western fertility decline has been attributed to mortality decline, urbanization, increased female labor force participation, rising wages, and more efficient contraception. Comparable economic development in Latin America has not resulted in large enough changes to encourage family size limitation. A table of fertility and economic indicators for selected countries in Latin America and Europe reflects the inverse relationship between income growth, urban growth, and growth in female educational status and fertility. The regression equation explains 60% of the variation in fertility rates among Latin American countries. Explanatory power increases to 75% when female

  14. The computed cranial focal point

    NARCIS (Netherlands)

    Jong, G.A. de; Maal, T.J.J.; Delye, H.

    2015-01-01

    INTRODUCTION: Stereophotogrammetry is a radiation-free method for monitoring skull development after craniosynostosis repair. Lack of clear fixed reference points complicate longitudinal comparison of 3D photographs. Therefore we developed the 'computed cranial focal point' (CCFP). METHODS: The CCFP

  15. Compressors selection and sizing

    CERN Document Server

    Brown, Royce N

    2005-01-01

    This practical reference provides in-depth information required to understand and properly estimate compressor capabilities and to select the proper designs. Engineers and students will gain a thorough understanding of compression principles, equipment, applications, selection, sizing, installation, and maintenance. The many examples clearly illustrate key aspects to help readers understand the ""real world"" of compressor technology.Compressors: Selection and Sizing, third edition is completely updated with new API standards. Additions requested by readers include a new section on di

  16. Magic Pointing for Eyewear Computers

    DEFF Research Database (Denmark)

    Jalaliniya, Shahram; Mardanbegi, Diako; Pederson, Thomas

    2015-01-01

    In this paper, we propose a combination of head and eye movements for touchlessly controlling the "mouse pointer" on eyewear devices, exploiting the speed of eye pointing and accuracy of head pointing. The method is a wearable computer-targeted variation of the original MAGIC pointing approach...

  17. Estimate of the particle size in nanoparticles of magnetite

    Energy Technology Data Exchange (ETDEWEB)

    Paresque, M.C.; Castro, J.A.; Campos, M.F.; Oliveira, E.M.; Liuzzi, M.A.S.C. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

    2016-07-01

    Full Text: Nanocrystalline particles of Fe3O4 were produced by co-precipitation in aquous mean. The particle size of magnetite is a very important parameter, because for particle size around 30 nm there is a transition superparamagnetic for ferromagnetic. This transition profoundly affects the properties of the nanofluid. The Langevin model allows an estimate of the particle size, directly from measured hysteresis curves. In this study, the particle size was also determined by x-ray diffraction with Rietveld analysis and by a Laser Particle Size Analyzer equipment. These two methods pointed out particle size around 20 nm. (author)

  18. Imaging study on acupuncture points

    Energy Technology Data Exchange (ETDEWEB)

    Yan, X H; Zhang, X Y [Synchrotron Radiation Research Center, Physics Department, and Surface Physics Laboratory (State Key Laboratory) of Fudan University, Shanghai 200433 (China); Liu, C L [Physics Department of Yancheng Teachers College, Yancheng 224002 (China); Dang, R S [Second Military Medical University, Shanghai 200433 (China); Ando, M [DDS center, Research Institute for Science and Technology, Tokyo University of Science, Yamasaki 2541, Noda, Chiba 278-8510 (Japan); Sugiyama, H [Photon Factory, Institute of Material Structure Science, High Energy Accelerator Research Organization, Oho 1-1, Tsukuba, Ibaraki 305-0801 (Japan); Chen, H S [Institute of Modern Physics, Fudan University, Shanghai 200433 (China); Ding, G H, E-mail: xy-zhang@fudan.edu.c [Shanghai Research Center of Acupuncture and Meridian, Shanghai 201203 (China)

    2009-09-01

    The topographic structures of acupuncture points were investigated by using the synchrotron radiation based Dark Field Image (DFI) method. Four following acupuncture points were studied: Sanyinjiao, Neiguan, Zusanli and Tianshu. We have found that at acupuncture point regions there exists the accumulation of micro-vessels. The images taken in the surrounding tissue out of the acupuncture points do not show such kind of structure. It is the first time to reveal directly the specific structure of acupuncture points by X-ray imaging.

  19. Imaging study on acupuncture points

    International Nuclear Information System (INIS)

    Yan, X H; Zhang, X Y; Liu, C L; Dang, R S; Ando, M; Sugiyama, H; Chen, H S; Ding, G H

    2009-01-01

    The topographic structures of acupuncture points were investigated by using the synchrotron radiation based Dark Field Image (DFI) method. Four following acupuncture points were studied: Sanyinjiao, Neiguan, Zusanli and Tianshu. We have found that at acupuncture point regions there exists the accumulation of micro-vessels. The images taken in the surrounding tissue out of the acupuncture points do not show such kind of structure. It is the first time to reveal directly the specific structure of acupuncture points by X-ray imaging.

  20. PowerPoint 2010 Bible

    CERN Document Server

    Wempen, Faithe

    2010-01-01

    Master PowerPoint and improve your presentation skills-with one book!. It's no longer enough to have slide after slide of text, bullets, and charts. It's not even enough to have good speaking skills if your PowerPoint slides bore your audience. Get the very most out of all that PowerPoint 2010 has to offer while also learning priceless tips and techniques for making good presentations in this new PowerPoint 2010 Bible. Well-known PowerPoint expert and author Faithe Wempen provides formatting tips; shows you how to work with drawings, tables, and SmartArt; introduces new collaboration tools; wa

  1. Unimodal tree size distributions possibly result from relatively strong conservatism in intermediate size classes.

    Directory of Open Access Journals (Sweden)

    Yue Bin

    Full Text Available Tree size distributions have long been of interest to ecologists and foresters because they reflect fundamental demographic processes. Previous studies have assumed that size distributions are often associated with population trends or with the degree of shade tolerance. We tested these associations for 31 tree species in a 20 ha plot in a Dinghushan south subtropical forest in China. These species varied widely in growth form and shade-tolerance. We used 2005 and 2010 census data from that plot. We found that 23 species had reversed J shaped size distributions, and eight species had unimodal size distributions in 2005. On average, modal species had lower recruitment rates than reversed J species, while showing no significant difference in mortality rates, per capita population growth rates or shade-tolerance. We compared the observed size distributions with the equilibrium distributions projected from observed size-dependent growth and mortality. We found that observed distributions generally had the same shape as predicted equilibrium distributions in both unimodal and reversed J species, but there were statistically significant, important quantitative differences between observed and projected equilibrium size distributions in most species, suggesting that these populations are not at equilibrium and that this forest is changing over time. Almost all modal species had U-shaped size-dependent mortality and/or growth functions, with turning points of both mortality and growth at intermediate size classes close to the peak in the size distribution. These results show that modal size distributions do not necessarily indicate either population decline or shade-intolerance. Instead, the modal species in our study were characterized by a life history strategy of relatively strong conservatism in an intermediate size class, leading to very low growth and mortality in that size class, and thus to a peak in the size distribution at intermediate sizes.

  2. Lefschetz Fixed Point Theorem and Lattice Points in Convex Polytopes

    OpenAIRE

    Sardo-Infirri, Sacha

    1993-01-01

    A simple convex lattice polytope $\\Box$ defines a torus-equivariant line bundle $\\LB$ over a toric variety $\\XB.$ Atiyah and Bott's Lefschetz fixed-point theorem is applied to the torus action on the $d''$-complex of $\\LB$ and information is obtained about the lattice points of $\\Box$. In particular an explicit formula is derived, computing the number of lattice points and the volume of $\\Box$ in terms of geometric data at its extreme points. We show this to be equivalent the results of Brion...

  3. Droplet size in a rectangular Venturi scrubber

    Directory of Open Access Journals (Sweden)

    M. A. M. Costa

    2004-06-01

    Full Text Available The Venturi scrubber is a device which uses liquid in the form of droplets to efficiently remove fine particulate matter from gaseous streams. Droplet size is of fundamental importance for the scrubber performance. In the present experimental study, a laser diffraction technique was used in order to measure droplet size in situ in a Venturi scrubber with a rectangular cross section. Droplet size distribution was measured as a function of gas velocity (58.3 to 74.9 m/s, liquid-to-gas ratio (0.07 to 0.27 l/m³, and distance from liquid injection point (64 to 173 mm. It was found that all these variables significantly affect droplet size. The results were compared with the predictions from correlations found in the literature.

  4. Problem size, parallel architecture, and optimal speedup

    Science.gov (United States)

    Nicol, David M.; Willard, Frank H.

    1988-01-01

    The communication and synchronization overhead inherent in parallel processing can lead to situations where adding processors to the solution method actually increases execution time. Problem type, problem size, and architecture type all affect the optimal number of processors to employ. The numerical solution of an elliptic partial differential equation is examined in order to study the relationship between problem size and architecture. The equation's domain is discretized into n sup 2 grid points which are divided into partitions and mapped onto the individual processor memories. The relationships between grid size, stencil type, partitioning strategy, processor execution time, and communication network type are analytically quantified. In so doing, the optimal number of processors was determined to assign to the solution, and identified (1) the smallest grid size which fully benefits from using all available processors, (2) the leverage on performance given by increasing processor speed or communication network speed, and (3) the suitability of various architectures for large numerical problems.

  5. Optimal External-Memory Planar Point Enclosure

    DEFF Research Database (Denmark)

    Arge, Lars; Samoladas, Vasilis; Yi, Ke

    2007-01-01

    external memory point enclosure data structure that can be used to answer a query in O(log  B N+K/B) I/Os, where B is the disk block size. To obtain this bound, Ω(N/B 1−ε ) disk blocks are needed for some constant ε>0. With linear space, the best obtainable query bound is O(log 2 N+K/B) if a linear output...... term O(K/B) is desired. To show this we prove a general lower bound on the tradeoff between the size of the data structure and its query cost. We also develop a family of structures with matching space and query bounds....

  6. Size of the iceberg

    DEFF Research Database (Denmark)

    Nielsen, Søren Saxmose; Toft, Nils; Okura, Hisako

    2012-01-01

    of detectable infections among all infected is often referred to as ‘the tip of the iceberg’. For MAP infections, infected cattle may be divided into those with cell-mediated immune reactions (CMI) during latent infection, and those with humoral immune reactions (HI) characterized by IgG1 antibodies.......e. a significant shift in the size of the iceberg. Although the ‘iceberg’ concept is well-known among paratuberculosis researchers, the size of the iceberg has not previously been characterized. Results can be used for inclusion of the distribution of cows in different infection stages at different ages...

  7. Large litter sizes

    DEFF Research Database (Denmark)

    Sandøe, Peter; Rutherford, K.M.D.; Berg, Peer

    2012-01-01

    This paper presents some key results and conclusions from a review (Rutherford et al. 2011) undertaken regarding the ethical and welfare implications of breeding for large litter size in the domestic pig and about different ways of dealing with these implications. Focus is primarily on the direct...... adverse consequences for animal welfare of Danish breeding for large litter sizes due to increased piglet mortality and the subsequent attempts to reverse these consequences by breeding for number of live piglets at day five rather than number of piglets born. By this change of breeding goal it seems...

  8. POINT CLOUD ORIENTED SHOULDER LINE EXTRACTION IN LOESS HILLY AREA

    Directory of Open Access Journals (Sweden)

    L. Min

    2016-06-01

    Full Text Available Shoulder line is the significant line in hilly area of Loess Plateau in China, dividing the surface into positive and negative terrain (P-N terrains. Due to the point cloud vegetation removal methods of P-N terrains are different, there is an imperative need for shoulder line extraction. In this paper, we proposed an automatic shoulder line extraction method based on point cloud. The workflow is as below: (i ground points were selected by using a grid filter in order to remove most of noisy points. (ii Based on DEM interpolated by those ground points, slope was mapped and classified into two classes (P-N terrains, using Natural Break Classified method. (iii The common boundary between two slopes is extracted as shoulder line candidate. (iv Adjust the filter gird size and repeat step i-iii until the shoulder line candidate matches its real location. (v Generate shoulder line of the whole area. Test area locates in Madigou, Jingbian County of Shaanxi Province, China. A total of 600 million points are acquired in the test area of 0.23km2, using Riegl VZ400 3D Laser Scanner in August 2014. Due to the limit Granted computing performance, the test area is divided into 60 blocks and 13 of them around the shoulder line were selected for filter grid size optimizing. The experiment result shows that the optimal filter grid size varies in diverse sample area, and a power function relation exists between filter grid size and point density. The optimal grid size was determined by above relation and shoulder lines of 60 blocks were then extracted. Comparing with the manual interpretation results, the accuracy of the whole result reaches 85%. This method can be applied to shoulder line extraction in hilly area, which is crucial for point cloud denoising and high accuracy DEM generation.

  9. Optimal Power Flow by Interior Point and Non Interior Point Modern Optimization Algorithms

    Directory of Open Access Journals (Sweden)

    Marcin Połomski

    2013-03-01

    Full Text Available The idea of optimal power flow (OPF is to determine the optimal settings for control variables while respecting various constraints, and in general it is related to power system operational and planning optimization problems. A vast number of optimization methods have been applied to solve the OPF problem, but their performance is highly dependent on the size of a power system being optimized. The development of the OPF recently has tracked significant progress both in numerical optimization techniques and computer techniques application. In recent years, application of interior point methods to solve OPF problem has been paid great attention. This is due to the fact that IP methods are among the fastest algorithms, well suited to solve large-scale nonlinear optimization problems. This paper presents the primal-dual interior point method based optimal power flow algorithm and new variant of the non interior point method algorithm with application to optimal power flow problem. Described algorithms were implemented in custom software. The experiments show the usefulness of computational software and implemented algorithms for solving the optimal power flow problem, including the system model sizes comparable to the size of the National Power System.

  10. Critical sizes and critical characteristics of nanoclusters, nanostructures and nanomaterials

    International Nuclear Information System (INIS)

    Suzdalev, I.P.

    2005-01-01

    Full text: Critical sizes and characteristics of nanoclusters and nanostructures are introduced as the parameters of nanosystems and nanomaterials. The next critical characteristics are considered: atomic and electronic 'magic number', critical size of cluster nucleation, critical size of melting-freezing of cluster, critical size of quantum (laser) radiation, critical sizes for the single electron conductivity, critical energy and magnetic field for the magnetic tunneling, critical cluster sizes for the giant magnetic resistance, critical size of the first order magnetic phase transition. The critical characteristics are estimated by thermodynamic approaches, by Moessbauer spectroscopy, AFM, heat capacity, SQUID magnetometry and other technique, The influence of cluster-cluster interactions, cluster-matrix interactions and cluster defects on cluster atomic dynamics, cluster melting, cluster critical sizes, Curie or Neel points and the character of magnetic phase transitions were investigated. The applications of critical size and critical characteristic parameters for the nanomaterial characterization are considered

  11. Making Sense of Boiling Points and Melting Points

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 12; Issue 6. Making Sense of Boiling Points and Melting Points. S Prahlada Rao Shravan Sunkada. General Article Volume 12 Issue 6 June 2007 pp 43-57. Fulltext. Click here to view fulltext PDF. Permanent link:

  12. Approximation point par point pour la resolution du probleme de ...

    African Journals Online (AJOL)

    Approximation point par point pour la resolution du probleme de dirichlet dans un disque pour l'equation elliptique du second ordre a coefficients constants dans le cas ou les racines de l'equation caracteristique sont distinctes. AMJ Tchalla, K Tcharie ...

  13. Simulating grain size estimation

    Czech Academy of Sciences Publication Activity Database

    Saxl, Ivan; Sülleiová, K.; Ponížil, P.

    2001-01-01

    Roč. 39, č. 6 (2001), s. 396-409 ISSN 0023-432X R&D Projects: GA ČR GA201/99/0269 Keywords : grain size estimation% ASTM standards%Voronoi tessellations Subject RIV: BE - Theoretical Physics Impact factor: 0.343, year: 2001

  14. Aircrew Sizing Survey 2011

    Science.gov (United States)

    2014-10-01

    the aircrew population is growing heavier and exhibiting some increased measurements related to increased mass. 15. SUBJECT TERMS anthropometry , body...LIST ACSS Aircrew Sizing Survey AFB Air Force Base ANSUR Army Anthropometric Survey CAESAR Civilian American & European Surface Anthropometry ...Surface Anthropometry Resource (CAESAR) was developed for the Joint Strike Fighter (JSF) program. The ACSS was intended to replace the JSF-CAESAR

  15. Size-dependent thermoelasticity

    Directory of Open Access Journals (Sweden)

    Ali R. Hadjesfandiari

    Full Text Available In this paper a consistent theory is developed for size-dependent thermoelasticity in heterogeneous anisotropic solids. This theory shows that the temperature change can create not only thermal strains, but also thermal mean curvatures in the solids. This formulation is based on the consistent size-dependent continuum mechanics in which the couple-stress tensor is skew-symmetric. Here by including scale-dependent measures in the energy and entropy equations, the general expressions for force- and couple-stresses, as well as entropy density, are obtained. Next, for the linear material the constitutive relations and governing coupled size-dependent thermoelasticity equations are developed. For linear material, one can see that the thermal properties are characterized by the classical symmetric thermal expansion tensor and the new size-dependent skew-symmetric thermal flexion tensor. Thus, for the most general anisotropic case, there are nine independent thermoelastic constants. Interestingly, for isotropic and cubic materials the thermal flexion tensor vanishes, which shows there is no thermal mean curvature

  16. Calculating Optimal Inventory Size

    Directory of Open Access Journals (Sweden)

    Ruby Perez

    2010-01-01

    Full Text Available The purpose of the project is to find the optimal value for the Economic Order Quantity Model and then use a lean manufacturing Kanban equation to find a numeric value that will minimize the total cost and the inventory size.

  17. Sizing up visualizations

    DEFF Research Database (Denmark)

    Jakobsen, Mikkel Rønne; Hornbæk, Kasper

    2011-01-01

    Whereas the literature is clear on the benefits of large displays and visualizations, little is known about their combination, that is, how display size affect the usability of visualizations. We describe a controlled experiment where 19 participants used focus+context, overview+detail, and zoomi...

  18. Space Station Energy Sizing

    Science.gov (United States)

    Rice, R. R.

    1983-01-01

    A general schematic for a space station power system is described. The major items of interest in the power system are the solar array, transfer devices, energy storage, and conversion equipment. Each item will have losses associated with it and must be utilized in any sizing study, and can be used as a checklist for itemizing the various system components.

  19. When size matters

    DEFF Research Database (Denmark)

    Toft-Bertelsen, Trine L.; Križaj, David; MacAulay, Nanna

    2017-01-01

    Key points: Mammalian cells are frequently exposed to stressors causing volume changes. The transient receptor potential vanilloid 4 (TRPV4) channel translates osmotic stress into ion flux. The molecular mechanism coupling osmolarity to TRPV4 activation remains elusive. TRPV4 responds to isosmola...

  20. Origin of chaos near critical points of quantum flow.

    Science.gov (United States)

    Efthymiopoulos, C; Kalapotharakos, C; Contopoulos, G

    2009-03-01

    The general theory of motion in the vicinity of a moving quantum nodal point (vortex) is studied in the framework of the de Broglie-Bohm trajectory method of quantum mechanics. Using an adiabatic approximation, we find that near any nodal point of an arbitrary wave function psi there is an unstable point (called the X point) in a frame of reference moving with the nodal point. The local phase portrait forms always a characteristic pattern called the "nodal-point- X -point complex." We find general formulas for this complex as well as necessary and sufficient conditions of validity of the adiabatic approximation. We demonstrate that chaos emerges from the consecutive scattering events of the orbits with nodal-point- X -point complexes. The scattering events are of two types (called type I and type II). A theoretical model is constructed yielding the local value of the Lyapunov characteristic numbers in scattering events of both types. The local Lyapunov characteristic number scales as an inverse power of the speed of the nodal point in the rest frame, implying that it scales proportionally to the size of the nodal-point- X -point complex. It is also an inverse power of the distance of a trajectory from the X point's stable manifold far from the complex. This distance plays the role of an effective "impact parameter." The results of detailed numerical experiments with different wave functions, possessing one, two, or three moving nodal points, are reported. Examples are given of regular and chaotic trajectories, and the statistics of the Lyapunov characteristic numbers of the orbits are found and compared to the number of encounter events of each orbit with the nodal-point- X -point complexes. The numerical results are in agreement with the theory, and various phenomena appearing at first as counterintuitive find a straightforward explanation.

  1. The economics of urban size.

    Science.gov (United States)

    Alonso, W

    1971-01-01

    An aggregative economic approach to the theory of city size is presented along with some empirical findings which suggest that even the largest cities have not yet reached excessive sizes from the point of view of growth and productivity. Urban magnitude is no simple 1 dimensional phenomenon. Modern urban centers are surrounded by very large, diffuse zonal boundaries, within which there are marked variations in the proportion of firms and people associated with that center, and in the intensity of the association. In sum, population does not constitute a conventional, countable set. In general, population will be considered as the basic magnitude and as a conventionally definable number. Most approaches to city size have emphasized the presumed diseconomy of urban scale and have sought to establish that population at which costs per capita are least, regarding this as optimal. It is argued here that both the logic and the factual basis of this approach are faulty. The argument of minimum costs is insufficient in its own terms. Such an objective is reasonable only if output per capita is constant, but it appears that output per capita is an increasing function of urban size. In that case, a more sensible objective of public policy would deal with the relation of outputs and inputs, rather than only with inputs. In every country for which evidence was found, local product per capita (or some index for it, such as income or wages) rises with urban size, and where comparable figures on cost are available, these rise far more slowly if at all. Although all of the data desirable are not available for any single country, the overall pattern is clear. Possibly the most surprising element in the data is the marked decline with increasing density in Social Overhead Captial Stocks (SOCS) per capita. This runs counter to common belief that the bigger the city the more infrastructure per capita is needed and may be the result of such effects as the greater linear quantities of

  2. Brocard Point and Euler Function

    Science.gov (United States)

    Sastry, K. R. S.

    2007-01-01

    This paper takes a known point from Brocard geometry, a known result from the geometry of the equilateral triangle, and bring in Euler's [empty set] function. It then demonstrates how to obtain new Brocard Geometric number theory results from them. Furthermore, this paper aims to determine a [triangle]ABC whose Crelle-Brocard Point [omega]…

  3. Model plant Key Measurement Points

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    For IAEA safeguards a Key Measurement Point is defined as the location where nuclear material appears in such a form that it may be measured to determine material flow or inventory. This presentation describes in an introductory manner the key measurement points and associated measurements for the model plant used in this training course

  4. The Random Material Point Method

    NARCIS (Netherlands)

    Wang, B.; Vardon, P.J.; Hicks, M.A.

    2017-01-01

    The material point method is a finite element variant which allows the material, represented by a point-wise discretization, to move through the background mesh. This means that large deformations, such as those observed post slope failure, can be computed. By coupling this material level

  5. Mathematical points as didactical ideas

    DEFF Research Database (Denmark)

    Mogensen, Arne

    Mathematics teaching in Denmark was recently recommended better organized in sequences with clear mathematical pedagogical goals and a focus on mathematical points. In this paper I define a mathematical point and inform on coding of transcripts in a video based Danish research study on grade 8...

  6. Conditioning in spatial point processes

    DEFF Research Database (Denmark)

    Coeurjolly, Jean-Francois; Møller, Jesper; Waagepetersen, Rasmus

    This tutorial provides an introduction to conditioning in spatial point processes or so-called Palm distributions. Initially, in the context of finite point processes, we give an explicit definition of Palm distributions in terms of their density functions. Then we review Palm distributions...... in the general case. Finally we discuss some examples of specific models and applications...

  7. Review of NJ point system.

    Science.gov (United States)

    2013-03-01

    The purpose of this study is to investigate the comparative effectiveness of point-based versus incident-based : negligent driver monitoring systems and to explore how certain changes to the existing point-based system used in : New Jersey might impr...

  8. Improved Dynamic Planar Point Location

    DEFF Research Database (Denmark)

    Brodal, Gerth Stølting; Arge, Lars; Georgiadis, Loukas

    2006-01-01

    We develop the first linear-space data structures for dynamic planar point location in general subdivisions that achieve logarithmic query time and poly-logarithmic update time.......We develop the first linear-space data structures for dynamic planar point location in general subdivisions that achieve logarithmic query time and poly-logarithmic update time....

  9. Inertial Pointing and Positioning System

    Science.gov (United States)

    Yee, Robert (Inventor); Robbins, Fred (Inventor)

    1998-01-01

    An inertial pointing and control system and method for pointing to a designated target with known coordinates from a platform to provide accurate position, steering, and command information. The system continuously receives GPS signals and corrects Inertial Navigation System (INS) dead reckoning or drift errors. An INS is mounted directly on a pointing instrument rather than in a remote location on the platform for-monitoring the terrestrial position and instrument attitude. and for pointing the instrument at designated celestial targets or ground based landmarks. As a result. the pointing instrument and die INS move independently in inertial space from the platform since the INS is decoupled from the platform. Another important characteristic of the present system is that selected INS measurements are combined with predefined coordinate transformation equations and control logic algorithms under computer control in order to generate inertial pointing commands to the pointing instrument. More specifically. the computer calculates the desired instrument angles (Phi, Theta. Psi). which are then compared to the Euler angles measured by the instrument- mounted INS. and forms the pointing command error angles as a result of the compared difference.

  10. Space power subsystem sizing

    International Nuclear Information System (INIS)

    Geis, J.W.

    1992-01-01

    This paper discusses a Space Power Subsystem Sizing program which has been developed by the Aerospace Power Division of Wright Laboratory, Wright-Patterson Air Force Base, Ohio. The Space Power Subsystem program (SPSS) contains the necessary equations and algorithms to calculate photovoltaic array power performance, including end-of-life (EOL) and beginning-of-life (BOL) specific power (W/kg) and areal power density (W/m 2 ). Additional equations and algorithms are included in the spreadsheet for determining maximum eclipse time as a function of orbital altitude, and inclination. The Space Power Subsystem Sizing program (SPSS) has been used to determine the performance of several candidate power subsystems for both Air Force and SDIO potential applications. Trade-offs have been made between subsystem weight and areal power density (W/m 2 ) as influenced by orbital high energy particle flux and time in orbit

  11. Small size ion pumps

    International Nuclear Information System (INIS)

    Cyranski, R.; Kiliszek, Cz.R.; Marks, J.; Sobolewski, A.; Magielko, H.

    2001-01-01

    This paper describes some designs of the two versions ion pumps and their range operation for various magnetic fields. The first version is made with different cell size in the anode element and titanium cathode operating in magnetic field from 600 to 650 Gs and the second version with the same anode element but differential Ti/Ta cathode working in magnetic field above 1200 Gs

  12. The Dynamical Mechanisms of the Cell Cycle Size Checkpoint

    International Nuclear Information System (INIS)

    Feng Shi-Fu; Yang Ling; Yan Jie; Liu Zeng-Rong

    2012-01-01

    Cell division must be tightly coupled to cell growth in order to maintain cell size, whereas the mechanisms of how initialization of mitosis is regulated by cell size remain to be elucidated. We develop a mathematical model of the cell cycle, which incorporates cell growth to investigate the dynamical properties of the size checkpoint in embryos of Xenopus laevis. We show that the size checkpoint is naturally raised from a saddle-node bifurcation, and in a mutant case, the cell loses its size control ability due to the loss of this saddle-node point

  13. Geodetic Control Points - Multi-State Control Point Database

    Data.gov (United States)

    NSGIC State | GIS Inventory — The Multi-State Control Point Database (MCPD) is a database of geodetic and mapping control covering Idaho and Montana. The control were submitted by registered land...

  14. Is it pointing to grasping or grasping pointing?

    Science.gov (United States)

    Savelsbergh, G J; Van der Kamp, J

    1999-07-01

    The Smeets and Brenner view on grasping is simple: grasping is in fact pointing. In our comments we examine the model beyond the reach-to-grasp task, namely, by grasping (without reaching) of moving objects and eating. The model fits the data of both tasks. Although generalization of a model to different tasks usually strengthens its acceptance, in the present case it reveals its shortcomings, namely, both tasks include a clear grasping component that is hard to accept as pointing.

  15. Black and White Adolescent Males' Perceptions of Ideal Body Size.

    Science.gov (United States)

    Thompson, Sharon H.; And Others

    1996-01-01

    Studied ideal body size beliefs of 337 white and 159 black adolescent males. Findings point toward a greater approval and social acceptance of a larger body size for black females by black males. Cultural differences may be a factor to consider in designing appropriate weight control programs. (SLD)

  16. Size-dependent melting of nanoparticles: Hundred years of ...

    Indian Academy of Sciences (India)

    point depression of nanoparticles and the variation is linear with the inverse of the particle size. An attempt to confirm this experimentally has been made first by. Pawlow [2] in 1910. Subsequently, other researchers [3–30] have investigated the variation of melting temperature with particle size and many theoretical models.

  17. Seasonal fluctuations in population size and habitat segregation of ...

    African Journals Online (AJOL)

    Seasonal fluctuations in population size reflect breeding patterns and movements of birds, but distinguishing residents from itinerant birds is difficult with partially migratory species such as Kittlitz's Plover. We determined changes in the size of Kittlitz's Plover populations in two microhabitats (Goose Point and Sandy Beach) ...

  18. Determining sample size for assessing species composition in ...

    African Journals Online (AJOL)

    Species composition is measured in grasslands for a variety of reasons. Commonly, observations are made using the wheel-point apparatus, but the problem of determining optimum sample size has not yet been satisfactorily resolved. In this study the wheel-point apparatus was used to record 2 000 observations in each of ...

  19. Research Note Pilot survey to assess sample size for herbaceous ...

    African Journals Online (AJOL)

    A pilot survey to determine sub-sample size (number of point observations per plot) for herbaceous species composition assessments, using a wheel-point apparatus applying the nearest-plant method, was conducted. Three plots differing in species composition on the Zululand coastal plain were selected, and on each plot ...

  20. Critical Parametric Study on Final Size of Magnetite Nanoparticles

    Science.gov (United States)

    Yusoff, A. H. M.; Salimi, M. N.; Jamlos, M. F.

    2018-03-01

    The great performance of magnetite nanoparticle in varsity field are mainly depended on their size since size determine the saturation magnetisation and also the phase purity. Magnetite nanoparticles were prepared using a simple co-precipitation method in order to study the influence of synthesis condition on the final size. Variable parameters include stirring rate, reaction temperature and pH of the solution can finely tuned the size of the resulting nanoparticles. Generally, any increase in these parameters had a gently reduction on particle size. But, the size was promoted to increase back at certain point due to the specific reason. Nucleation and growth processes are involved to clarify the impact of synthesis condition on the particle sizes. The result obtained give the correct conditions for pure magnetite synthesis at nanoscale size of dimensions less than 100 nm.

  1. Myofascial Trigger Point Pain Syndromes.

    Science.gov (United States)

    Gerwin, Robert D

    2016-10-01

    Myofascial pain syndromes caused by trigger points (TrPs) in muscle are a common cause of local and generalized pain. Trigger points are hyperirritable zones in contracted bands of muscle, thought to be caused by muscle overload or stress. Stress TrPs have characteristic electromyographic features, and can be visualized with ultrasound and magnetic resonance elastography. Trigger point needling or injection can be effective in inactivating TrP, but correcting triggers is also critical. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  2. NOTE: Do acupuncture points exist?

    Science.gov (United States)

    Yan, Xiaohui; Zhang, Xinyi; Liu, Chenglin; Dang, Ruishan; Huang, Yuying; He, Wei; Ding, Guanghong

    2009-05-01

    We used synchrotron x-ray fluorescence analysis to probe the distribution of four chemical elements in and around acupuncture points, two located in the forearm and two in the lower leg. Three of the four acupuncture points showed significantly elevated concentrations of elements Ca, Fe, Cu and Zn in relation to levels in the surrounding tissue, with similar elevation ratios for Cu and Fe. The mapped distribution of these elements implies that each acupuncture point seems to be elliptical with the long axis along the meridian.

  3. PowerPoint 2013 bible

    CERN Document Server

    Wempen, Faithe

    2013-01-01

    Master PowerPoint and improve your presentation skills with one book! In today's business climate, you need to know PowerPoint inside and out, and that's not all. You also need to be able to make a presentation that makes an impact. From using sophisticated transitions and animation in your PowerPoint presentations to interfacing in person with your audience, this information-packed book helps you succeed. Start creating professional-quality slides that captivate audiences and discover essential tips and techniques for making first-rate presentations, whether you're at a podium or

  4. Calorimetry end-point predictions

    International Nuclear Information System (INIS)

    Fox, M.A.

    1981-01-01

    This paper describes a portion of the work presently in progress at Rocky Flats in the field of calorimetry. In particular, calorimetry end-point predictions are outlined. The problems associated with end-point predictions and the progress made in overcoming these obstacles are discussed. The two major problems, noise and an accurate description of the heat function, are dealt with to obtain the most accurate results. Data are taken from an actual calorimeter and are processed by means of three different noise reduction techniques. The processed data are then utilized by one to four algorithms, depending on the accuracy desired to determined the end-point

  5. Medium-size nuclear plants

    International Nuclear Information System (INIS)

    Vogelweith, L.; Lavergne, J.C.; Martinot, G.; Weiss, A.

    1977-01-01

    CEA (TECHNICATOME) has developed a range of pressurized water reactors of the type ''CAS compact'' which are adapted to civil ship propulsion, or to electric power production, combined possibly with heat production, up to outputs equivalent to 125 MWe. Nuclear plants equipped with these reactors are suitable to medium-size electric networks. Among the possible realizations, two types of plants are mentioned as examples: 1) Floating electron-nuclear plants; and 2) Combined electric power and desalting plants. The report describes the design characteristics of the different parts of a 125 MWe unit floating electro-nuclear plant: nuclear steam system CAS 3 G, power generating plant, floating platform for the whole plant. The report gives attention to the different possibilities according to site conditions (the plant can be kept floating, in a natural or artificial basin, it can be put aground, ...) and to safety and environment factors. Such unit can be used in places where there is a growing demand in electric power and fresh water. The report describes how the reactor, the power generating plant and multiflash distillation units of an electric power-desalting plant can be combined: choice of the ratio water output/electric power output, thermal cycle combination, choice of the gain ratio, according to economic considerations, and to desired goal of water output. The report analyses also some technical options, such as: choice of the extraction point of steam used as heat supply of the desalting station (bleeding a condensation turbine, or recovering steam at the exhaust of a backpressure turbine), design making the system safe. Lastly, economic considerations are dealt with: combining the production of fresh water and electric power provides usually a much better energy balance and a lower cost for both products. Examples are given of some types of installations which combine medium-size reactors with fresh water stations yielding from 10000 to 120000 m 3 per day

  6. Dosimetric adaptive IMRT driven by fiducial points

    International Nuclear Information System (INIS)

    Crijns, Wouter; Van Herck, Hans; Defraene, Gilles; Van den Bergh, Laura; Haustermans, Karin; Slagmolen, Pieter; Maes, Frederik; Van den Heuvel, Frank

    2014-01-01

    Purpose: Intensity modulated radiotherapy (IMRT) and volumetric modulated arc therapy have become standard treatments but are more sensitive to anatomical variations than 3D conformal techniques. To correct for inter- and intrafraction anatomical variations, fast and easy to implement methods are needed. Here, the authors propose a full dosimetric IMRT correction that finds a compromise in-between basic repositioning (the current clinical practice) and full replanning. It simplifies replanning by avoiding a recontouring step and a full dose calculation. It surpasses repositioning by updating the preoptimized fluence and monitor units (MU) using a limited number of fiducial points and a pretreatment (CB)CT. To adapt the fluence the fiducial points were projected in the beam's eye view (BEV). To adapt the MUs, point dose calculation towards the same fiducial points were performed. The proposed method is intrinsically fast and robust, and simple to understand for operators, because of the use of only four fiducial points and the beam data based point dose calculations. Methods: To perform our dosimetric adaptation, two fluence corrections in the BEV are combined with two MU correction steps along the beam's path. (1) A transformation of the fluence map such that it is realigned with the current target geometry. (2) A correction for an unintended scaling of the penumbra margin when the treatment beams scale to the current target size. (3) A correction for the target depth relative to the body contour and (4) a correction for the target distance to the source. The impact of the correction strategy and its individual components was evaluated by simulations on a virtual prostate phantom. This heterogeneous reference phantom was systematically subjected to population based prostate transformations to simulate interfraction variations. Additionally, a patient example illustrated the clinical practice. The correction strategy was evaluated using both dosimetric

  7. Size and Reputation

    DEFF Research Database (Denmark)

    Jakobsen, Peter Viggo; Ringsmose, Jens

    2015-01-01

    Denmark appears far more successful in managing its ‘special’ relationship with the USA than the UK since 9/11. By doing exactly the same as the UK, but on a much smaller scale and at much lower cost in terms of blood, treasure and domestic controversy, Denmark has succeeded in generating more...... American public gratitude than the UK. While London has been accused of losing Basra and Musa Qaleh, Copenhagen has been showered with praise and top-posts in NATO. This article explains why demonstrating how the differences in size and reputation gave rise to different expectations of the special...

  8. Large litter sizes

    DEFF Research Database (Denmark)

    Sandøe, Peter; Rutherford, K.M.D.; Berg, Peer

    2012-01-01

    This paper presents some key results and conclusions from a review (Rutherford et al. 2011) undertaken regarding the ethical and welfare implications of breeding for large litter size in the domestic pig and about different ways of dealing with these implications. Focus is primarily on the direct...... possible to achieve a drop in relative piglet mortality and the related welfare problems. However, there will be a growing problem with the need to use foster or nurse sows which may have negative effects on both sows and piglets. This gives rise to new challenges for management....

  9. Maryland ESI: NESTS (Nest Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for raptors in Maryland. Vector points in this data set represent bird nesting sites. Species-specific...

  10. Parametric statistical change point analysis

    CERN Document Server

    Chen, Jie

    2000-01-01

    This work is an in-depth study of the change point problem from a general point of view and a further examination of change point analysis of the most commonly used statistical models Change point problems are encountered in such disciplines as economics, finance, medicine, psychology, signal processing, and geology, to mention only several The exposition is clear and systematic, with a great deal of introductory material included Different models are presented in each chapter, including gamma and exponential models, rarely examined thus far in the literature Other models covered in detail are the multivariate normal, univariate normal, regression, and discrete models Extensive examples throughout the text emphasize key concepts and different methodologies are used, namely the likelihood ratio criterion, and the Bayesian and information criterion approaches A comprehensive bibliography and two indices complete the study

  11. Model plant key measurement points

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The key measurement points for the model low enriched fuel fabrication plant are described as well as the measurement methods. These are the measurement points and methods that are used to complete the plant's formal material balance. The purpose of the session is to enable participants to: (1) understand the basis for each key measurement; and (2) understand the importance of each measurement to the overall plant material balance. The feed to the model low enriched uranium fuel fabrication plant is UF 6 and the product is finished light water reactor fuel assemblies. The waste discards are solid and liquid wastes. The plant inventory consists of unopened UF 6 cylinders, UF 6 heels, fuel assemblies, fuel rods, fuel pellets, UO 2 powder, U 3 O 8 powder, and various scrap materials. At the key measurement points the total plant material balance (flow and inventory) is measured. The two types of key measurement points-flow and inventory are described

  12. Virginia ESI: REPTPT (Reptile Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for sea turtles in Virginia. Vector points in this data set represent nesting sites. Species-specific...

  13. Louisiana ESI: NESTS (Nest Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for seabird and wading bird nesting colonies in coastal Louisiana. Vector points in this data set represent...

  14. Allegheny County Cell Tower Points

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset portrays cell tower locations as points in Allegheny County. The dataset is based on outbuilding codes in the Property Assessment Parcel Database used...

  15. Calcareous Fens - Source Feature Points

    Data.gov (United States)

    Minnesota Department of Natural Resources — Pursuant to the provisions of Minnesota Statutes, section 103G.223, this database contains points that represent calcareous fens as defined in Minnesota Rules, part...

  16. Control Point Generated PLS - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Control Point Generated PLS layer contains line and polygon features to the 1/4 of 1/4 PLS section (approximately 40 acres) and government lot level. The layer...

  17. Control Point Generated PLS - polygons

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Control Point Generated PLS layer contains line and polygon features to the 1/4 of 1/4 PLS section (approximately 40 acres) and government lot level. The layer...

  18. Hawaii ESI: NESTS (Nest Points)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for seabird nesting colonies in coastal Hawaii. Vector points in this data set represent locations of...

  19. A generalized saddle point theorem

    International Nuclear Information System (INIS)

    Liu, J.Q.

    1988-11-01

    The well-known saddle point theorem is extended to the case of functions defined on a product space X x V, where X is a Banach space and V is a compact manifold. Under some linking conditions, the existence of at least cuplength (V) + 1 critical points is proved. The abstract theorems are applied to the existence problems of periodic solutions of Hamiltonian systems with periodic nonlinearity and/or resonance. (author). 8 refs

  20. Developing SharePoint applications

    OpenAIRE

    Rupnik, Gašper

    2011-01-01

    The thesis includes a research on SharePoint 2010 programming capabilities and a display of products created by this knowledge. The introduction part includes background information on how the topic was chosen and how the thesis was developed. The second chapter presents the SharePoint platform, which includes a description of its structure, function and usability. The third chapter focuses solely on the programming of the platform. First, some of the most useful software tools for i...

  1. SharePoint User's Guide

    CERN Document Server

    Corporation, Infusion Development

    2009-01-01

    This straightforward guide shows SharePoint users how to create and use web sites for sharing and collaboration. Learn to use the document and picture libraries for adding and editing content, add discussion boards and surveys, receive alerts when documents and information have been added or changed, and enhance security. Designed to help you find answers quickly, the book shows how to make the most of SharePoint for productivity and collaboration.

  2. Some remarks on farthest points

    Czech Academy of Sciences Publication Activity Database

    Montesinos, V.; Zizler, P.; Zizler, Václav

    2011-01-01

    Roč. 105, č. 1 (2011), s. 119-131 ISSN 1578-7303 R&D Projects: GA AV ČR IAA100190901 Institutional research plan: CEZ:AV0Z10190503 Keywords : farthest points * strongly exposed points * generic differentiability * convex functions Subject RIV: BA - General Mathematics Impact factor: 0.340, year: 2011 http://link.springer.com/article/10.1007%2Fs13398-011-0012-z

  3. Effect of the number of two-wheeled containers at a gathering point on energetic workload and work efficiency

    NARCIS (Netherlands)

    Kuijer, P. Paul F M; Frings-Dresen, Monique H W; Van Der Beek, Allard J.; Van Dieën, Jaap H.; Visser, Bart

    2000-01-01

    The effect of the number of two-wheeled containers at a gathering point on the energetic workload and the work efficiency in refuse collecting was studied. The results showed that the size of the gathering point had no effect on the energetic workload. However, the size of the gathering point had an

  4. Robust point matching via vector field consensus.

    Science.gov (United States)

    Jiayi Ma; Ji Zhao; Jinwen Tian; Yuille, Alan L; Zhuowen Tu

    2014-04-01

    In this paper, we propose an efficient algorithm, called vector field consensus, for establishing robust point correspondences between two sets of points. Our algorithm starts by creating a set of putative correspondences which can contain a very large number of false correspondences, or outliers, in addition to a limited number of true correspondences (inliers). Next, we solve for correspondence by interpolating a vector field between the two point sets, which involves estimating a consensus of inlier points whose matching follows a nonparametric geometrical constraint. We formulate this a maximum a posteriori (MAP) estimation of a Bayesian model with hidden/latent variables indicating whether matches in the putative set are outliers or inliers. We impose nonparametric geometrical constraints on the correspondence, as a prior distribution, using Tikhonov regularizers in a reproducing kernel Hilbert space. MAP estimation is performed by the EM algorithm which by also estimating the variance of the prior model (initialized to a large value) is able to obtain good estimates very quickly (e.g., avoiding many of the local minima inherent in this formulation). We illustrate this method on data sets in 2D and 3D and demonstrate that it is robust to a very large number of outliers (even up to 90%). We also show that in the special case where there is an underlying parametric geometrical model (e.g., the epipolar line constraint) that we obtain better results than standard alternatives like RANSAC if a large number of outliers are present. This suggests a two-stage strategy, where we use our nonparametric model to reduce the size of the putative set and then apply a parametric variant of our approach to estimate the geometric parameters. Our algorithm is computationally efficient and we provide code for others to use it. In addition, our approach is general and can be applied to other problems, such as learning with a badly corrupted training data set.

  5. Digital microwave communication engineering point-to-point microwave systems

    CERN Document Server

    Kizer, George

    2013-01-01

    The first book to cover all engineering aspects of microwave communication path design for the digital age Fixed point-to-point microwave systems provide moderate-capacity digital transmission between well-defined locations. Most popular in situations where fiber optics or satellite communication is impractical, it is commonly used for cellular or PCS site interconnectivity where digital connectivity is needed but not economically available from other sources, and in private networks where reliability is most important. Until now, no book has adequately treated all en

  6. Recent progress in fission at saddle point and scission point

    International Nuclear Information System (INIS)

    Blons, J.; Paya, D.; Signarbieux, C.

    High resolution measurements of 230 Th and 232 Th fission cross sections for neutrons exhibit a fine structure. Such a structure is interpreted as a superposition of two rotational bands in the third, asymmetric, well of the fission barrier. The fragment mass distribution in the thermal fission of 235 U and 233 U does not show any even-odd effect, even at the highest kinetic energies. This is the mark of a strong viscosity in the descent from saddle point to scission point [fr

  7. March 2003 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data (Geodetic Coordinates) from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from...

  8. December 2002 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data (latitude and longitude) from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs)...

  9. April 2004 Lidar Point Data of Southern California Coastline: Dana Point to Point La Jolla

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains lidar point data (Geodetic Coordinates) from a strip of Southern California coastline (including water, beach, cliffs, and top of cliffs) from...

  10. Two-point entanglement near a quantum phase transition

    International Nuclear Information System (INIS)

    Chen, Han-Dong

    2007-01-01

    In this work, we study the two-point entanglement S(i, j), which measures the entanglement between two separated degrees of freedom (ij) and the rest of system, near a quantum phase transition. Away from the critical point, S(i, j) saturates with a characteristic length scale ξ E , as the distance |i - j| increases. The entanglement length ξ E agrees with the correlation length. The universality and finite size scaling of entanglement are demonstrated in a class of exactly solvable one-dimensional spin model. By connecting the two-point entanglement to correlation functions in the long range limit, we argue that the prediction power of a two-point entanglement is universal as long as the two involved points are separated far enough

  11. Benchmarking and improving point cloud data management in MonetDB

    NARCIS (Netherlands)

    Martinez-Rubi, O.; Van Oosterom, P.J.M.; Goncalves, R.; Tijssen, T.P.M.; Ivanova, M.; Kersten, M.L.; Alvanaki, F.

    2015-01-01

    The popularity, availability and sizes of point cloud data sets are increasing, thus raising interesting data management and processing challenges. Various software solutions are available for the management of point cloud data. A benchmark for point cloud data management systems was defined and it

  12. Making Sense of Boiling Points and Melting Points

    Indian Academy of Sciences (India)

    The boiling and melting points of a pure substance are char- acteristic physical constants of that substance in its pure state. Although it is not possible to predict these physical constants for a given substance, it is, however, possible to rationalize these values on a relative basis for given substances, taking into account the ...

  13. Making Sense of Boiling Points and Melting Points

    Indian Academy of Sciences (India)

    to rationalize the trends in these physical constants based on non- covalent interactions and symmetry, .... the product of distance d between the two points and the magni- tude of charge e gives the magnitude of the ... Individual bond moments in a molecule add up in vector fashion to result in the net dipole moment for the ...

  14. Portable biosensors and point-of-care systems

    CERN Document Server

    Kintzios, Spyridon E

    2017-01-01

    This book describes the principles, design and applications of a new generation of analytical and diagnostic biomedical devices, characterized by their very small size, ease of use, multi-analytical capabilities and speed to provide handheld and mobile point-of-care (POC) diagnostics.

  15. Unfolding grain size effects in barium titanate ferroelectric ceramics

    Science.gov (United States)

    Tan, Yongqiang; Zhang, Jialiang; Wu, Yanqing; Wang, Chunlei; Koval, Vladimir; Shi, Baogui; Ye, Haitao; McKinnon, Ruth; Viola, Giuseppe; Yan, Haixue

    2015-01-01

    Grain size effects on the physical properties of polycrystalline ferroelectrics have been extensively studied for decades; however there are still major controversies regarding the dependence of the piezoelectric and ferroelectric properties on the grain size. Dense BaTiO3 ceramics with different grain sizes were fabricated by either conventional sintering or spark plasma sintering using micro- and nano-sized powders. The results show that the grain size effect on the dielectric permittivity is nearly independent of the sintering method and starting powder used. A peak in the permittivity is observed in all the ceramics with a grain size near 1 μm and can be attributed to a maximum domain wall density and mobility. The piezoelectric coefficient d33 and remnant polarization Pr show diverse grain size effects depending on the particle size of the starting powder and sintering temperature. This suggests that besides domain wall density, other factors such as back fields and point defects, which influence the domain wall mobility, could be responsible for the different grain size dependence observed in the dielectric and piezoelectric/ferroelectric properties. In cases where point defects are not the dominant contributor, the piezoelectric constant d33 and the remnant polarization Pr increase with increasing grain size. PMID:25951408

  16. Unfolding grain size effects in barium titanate ferroelectric ceramics.

    Science.gov (United States)

    Tan, Yongqiang; Zhang, Jialiang; Wu, Yanqing; Wang, Chunlei; Koval, Vladimir; Shi, Baogui; Ye, Haitao; McKinnon, Ruth; Viola, Giuseppe; Yan, Haixue

    2015-05-07

    Grain size effects on the physical properties of polycrystalline ferroelectrics have been extensively studied for decades; however there are still major controversies regarding the dependence of the piezoelectric and ferroelectric properties on the grain size. Dense BaTiO3 ceramics with different grain sizes were fabricated by either conventional sintering or spark plasma sintering using micro- and nano-sized powders. The results show that the grain size effect on the dielectric permittivity is nearly independent of the sintering method and starting powder used. A peak in the permittivity is observed in all the ceramics with a grain size near 1 μm and can be attributed to a maximum domain wall density and mobility. The piezoelectric coefficient d33 and remnant polarization Pr show diverse grain size effects depending on the particle size of the starting powder and sintering temperature. This suggests that besides domain wall density, other factors such as back fields and point defects, which influence the domain wall mobility, could be responsible for the different grain size dependence observed in the dielectric and piezoelectric/ferroelectric properties. In cases where point defects are not the dominant contributor, the piezoelectric constant d33 and the remnant polarization Pr increase with increasing grain size.

  17. Fixed points of quantum operations

    International Nuclear Information System (INIS)

    Arias, A.; Gheondea, A.; Gudder, S.

    2002-01-01

    Quantum operations frequently occur in quantum measurement theory, quantum probability, quantum computation, and quantum information theory. If an operator A is invariant under a quantum operation φ, we call A a φ-fixed point. Physically, the φ-fixed points are the operators that are not disturbed by the action of φ. Our main purpose is to answer the following question. If A is a φ-fixed point, is A compatible with the operation elements of φ? We shall show in general that the answer is no and we shall give some sufficient conditions under which the answer is yes. Our results will follow from some general theorems concerning completely positive maps and injectivity of operator systems and von Neumann algebras

  18. Dynamic magnetic x-points

    International Nuclear Information System (INIS)

    Leboeuf, J.N.; Tajima, T.; Dawson, J.M.

    1981-03-01

    Two-and-one-half dimensional magnetostatic and electromagnetic particle simulations of time-varying magnetic x-points and the associated plasma response are reported. The stability and topology depend on the crossing angle of the field lines at the x-point, irrespective of the plasma β. The electrostatic field and finite Larmor radius effects play an important role in current penetration and shaping of the plasma flow. The snapping of the field lines, and dragging of the plasma into, and confinement of the plasma at, an o-point (magnetic island) is observed. Magnetic island coalescence with explosive growth of the coalescence mode occurs and is accompanied by a large increase of kinetic energy and temperature as well as the formation of hot tails on the distribution functions

  19. Cleaning Massive Sonar Point Clouds

    DEFF Research Database (Denmark)

    Arge, Lars Allan; Larsen, Kasper Green; Mølhave, Thomas

    2010-01-01

    We consider the problem of automatically cleaning massive sonar data point clouds, that is, the problem of automatically removing noisy points that for example appear as a result of scans of (shoals of) fish, multiple reflections, scanner self-reflections, refraction in gas bubbles, and so on. We...... describe a new algorithm that avoids the problems of previous local-neighbourhood based algorithms. Our algorithm is theoretically I/O-efficient, that is, it is capable of efficiently processing massive sonar point clouds that do not fit in internal memory but must reside on disk. The algorithm is also...... relatively simple and thus practically efficient, partly due to the development of a new simple algorithm for computing the connected components of a graph embedded in the plane. A version of our cleaning algorithm has already been incorporated in a commercial product....

  20. SURFACE FITTING FILTERING OF LIDAR POINT CLOUD WITH WAVEFORM INFORMATION

    Directory of Open Access Journals (Sweden)

    S. Xing

    2017-09-01

    Full Text Available Full-waveform LiDAR is an active technology of photogrammetry and remote sensing. It provides more detailed information about objects along the path of a laser pulse than discrete-return topographic LiDAR. The point cloud and waveform information with high quality can be obtained by waveform decomposition, which could make contributions to accurate filtering. The surface fitting filtering method with waveform information is proposed to present such advantage. Firstly, discrete point cloud and waveform parameters are resolved by global convergent Levenberg Marquardt decomposition. Secondly, the ground seed points are selected, of which the abnormal ones are detected by waveform parameters and robust estimation. Thirdly, the terrain surface is fitted and the height difference threshold is determined in consideration of window size and mean square error. Finally, the points are classified gradually with the rising of window size. The filtering process is finished until window size is larger than threshold. The waveform data in urban, farmland and mountain areas from “WATER (Watershed Allied Telemetry Experimental Research” are selected for experiments. Results prove that compared with traditional method, the accuracy of point cloud filtering is further improved and the proposed method has highly practical value.

  1. Surface Fitting Filtering of LIDAR Point Cloud with Waveform Information

    Science.gov (United States)

    Xing, S.; Li, P.; Xu, Q.; Wang, D.; Li, P.

    2017-09-01

    Full-waveform LiDAR is an active technology of photogrammetry and remote sensing. It provides more detailed information about objects along the path of a laser pulse than discrete-return topographic LiDAR. The point cloud and waveform information with high quality can be obtained by waveform decomposition, which could make contributions to accurate filtering. The surface fitting filtering method with waveform information is proposed to present such advantage. Firstly, discrete point cloud and waveform parameters are resolved by global convergent Levenberg Marquardt decomposition. Secondly, the ground seed points are selected, of which the abnormal ones are detected by waveform parameters and robust estimation. Thirdly, the terrain surface is fitted and the height difference threshold is determined in consideration of window size and mean square error. Finally, the points are classified gradually with the rising of window size. The filtering process is finished until window size is larger than threshold. The waveform data in urban, farmland and mountain areas from "WATER (Watershed Allied Telemetry Experimental Research)" are selected for experiments. Results prove that compared with traditional method, the accuracy of point cloud filtering is further improved and the proposed method has highly practical value.

  2. Fixed-point signal processing

    CERN Document Server

    Padgett, Wayne T

    2009-01-01

    This book is intended to fill the gap between the ""ideal precision"" digital signal processing (DSP) that is widely taught, and the limited precision implementation skills that are commonly required in fixed-point processors and field programmable gate arrays (FPGAs). These skills are often neglected at the university level, particularly for undergraduates. We have attempted to create a resource both for a DSP elective course and for the practicing engineer with a need to understand fixed-point implementation. Although we assume a background in DSP, Chapter 2 contains a review of basic theory

  3. Geometric Computations On Indecisive Points

    DEFF Research Database (Denmark)

    Jørgensen, Allan Grønlund; Phillips, Jeff; Loffler, Maarten

    2011-01-01

    We study computing with indecisive point sets. Such points have spatial uncertainty where the true location is one of a finite number of possible locations. This data arises from probing distributions a few times or when the location is one of a few locations from a known database. In particular......, we study computing distributions of geometric functions such as the radius of the smallest enclosing ball and the diameter. Surprisingly, we can compute the distribution of the radius of the smallest enclosing ball exactly in polynomial time, but computing the same distribution for the diameter is #P...

  4. Analysis of irregularly distributed points

    DEFF Research Database (Denmark)

    Hartelius, Karsten

    1996-01-01

    , but the usage of simple kriging may lead to ill-conditioned matrices when applied to highly irregularly distributed points. Adaptive Kalman filter schemes are investigated. A new parallel Kalman filter algorithm based on windowing technique gives good results in a case study on the Igallico satellite scene...... and represents an interesting contextuel classifier. Extended Kalman filtering on the other hand seems to be well suited for interpolation in gradually changing environments. Bayesian restoration is applied to a point matching problem, which consists of matching a grid to an image of (irregularly) distributed...

  5. Implementing floating-point DSP

    Czech Academy of Sciences Publication Activity Database

    Kadlec, Jiří; Chappel, S.

    2006-01-01

    Roč. 2, č. 3 (2006), s. 12-14 R&D Projects: GA AV ČR 1ET400750406; GA MŠk 1M0567 EU Projects: European Commission(XE) 027611 - AETHER Program:FP6 Institutional research plan: CEZ:AV0Z10750506 Keywords : PicoBlaze * floating point * FPGA Subject RIV: JC - Computer Hardware ; Software http://www.xilinx.com/publications/magazines/emb_03/xc_pdf/p12-14_3emb-point.pdf

  6. Scanning microscopic four-point conductivity probes

    DEFF Research Database (Denmark)

    Petersen, Christian Leth; Hansen, Torben Mikael; Bøggild, Peter

    2002-01-01

    A method for fabricating microscopic four-point probes is presented. The method uses silicon-based microfabrication technology involving only two patterning steps. The last step in the fabrication process is an unmasked deposition of the conducting probe material, and it is thus possible to select...... the conducting material either for a silicon wafer or a single probe unit. Using shadow masking photolithography an electrode spacing (pitch) down to 1.1 mum was obtained, with cantilever separation down to 200 run. Characterisation measurements have shown the microscopic probes to be mechanically very flexible...... and robust. Repeated conductivity measurements on polythiophene films in the same surface area are reproduced within an accuracy of 3%. Automated nanoresolution position control allows scanning across millimetre sized areas, in order to create high spatial resolution maps of the in-plane conductivity....

  7. Size-dependent collection of micrometer-sized particles using nylon mesh

    Science.gov (United States)

    Yamamoto, Naomichi; Kumagai, Kazukiyo; Fujii, Minoru; Shendell, Derek G.; Endo, Osamu; Yanagisawa, Yukio

    Our study explored the size-dependent collection characteristics for micron-sized particles using several kinds of commercially available woven nylon net filters. The particle concentrations with and without the filter were compared to determine the filtration characteristics. The theoretical efficiencies based on a single-fiber theory and a hole model were also computed. Although the theoretical efficiencies were generally consistent with the experimental results, the non-uniformity of air velocity profile within a mesh hole, and a particle's detachment from or bounce off the filters, should be further investigated in future research. Overall, the present study revealed the size-fractionation capability of the nylon wire mesh filters for micron-sized particles from experimental and theoretical points of view. Unlike impactors, the size-fractionation characteristics of the nylon wire mesh filter were determined by particle size, mesh fiber diameter, and a combination of different particle collection mechanisms including impaction, interception, and gravitational settling. Each mechanical process appears interdependently governed in part by the filter dimensions such as filter mesh size (diameter of opening) as well as related variables such as packing density and fiber diameter.

  8. Size reduction machine

    International Nuclear Information System (INIS)

    Fricke, V.

    1999-01-01

    The Size Reduction Machine (SRM) is a mobile platform capable of shearing various shapes and types of metal components at a variety of elevations. This shearing activity can be performed without direct physical movement and placement of the shear head by the operator. The base unit is manually moved and roughly aligned to each cut location. The base contains the electronics: hydraulic pumps, servos, and actuators needed to move the shear-positioning arm. The movable arm allows the shear head to have six axes of movement and to cut to within 4 inches of a wall surface. The unit has a slick electrostatic capture coating to assist in external decontamination. Internal contamination of the unit is controlled by a high-efficiency particulate air (HEPA) filter on the cooling inlet fan. The unit is compact enough to access areas through a 36-inch standard door opening. This paper is an Innovative Technology Summary Report designed to provide potential users with the information they need to quickly determine if a technology would apply to a particular environmental management problem. They also are designed for readers who may recommend that a technology be considered by prospective users

  9. Flat Coalgebraic Fixed Point Logics

    Science.gov (United States)

    Schröder, Lutz; Venema, Yde

    Fixed point logics are widely used in computer science, in particular in artificial intelligence and concurrency. The most expressive logics of this type are the μ-calculus and its relatives. However, popular fixed point logics tend to trade expressivity for simplicity and readability, and in fact often live within the single variable fragment of the μ-calculus. The family of such flat fixed point logics includes, e.g., CTL, the *-nesting-free fragment of PDL, and the logic of common knowledge. Here, we extend this notion to the generic semantic framework of coalgebraic logic, thus covering a wide range of logics beyond the standard μ-calculus including, e.g., flat fragments of the graded μ-calculus and the alternating-time μ-calculus (such as ATL), as well as probabilistic and monotone fixed point logics. Our main results are completeness of the Kozen-Park axiomatization and a timed-out tableaux method that matches ExpTime upper bounds inherited from the coalgebraic μ-calculus but avoids using automata.

  10. ACS Photometric Zero Point Verification

    Science.gov (United States)

    Dolphin, Andrew

    2003-07-01

    The uncertainties in the photometric zero points create a fundamental limit to the accuracy of photometry. The current state of the ACS calibration is surprisingly poor, with zero point uncertainties of 0.03 magnitudes in the Johnson filters. The reason for this is that ACS observations of excellent ground-based standard fields, such as the omega Cen field used for WFPC2 calibrations, have not been obtained. Instead, the ACS photometric calibrations are based primarily on semi-emprical synthetic zero points and observations of fields too crowded for accurate ground-based photometry. I propose to remedy this problem by obtaining ACS broadband images of the omega Cen standard field with both the WFC and HRC. This will permit the direct determination of the ACS transformations, and is expected to double the accuracy to which the ACS zero points are known. A second benefit is that it will facilitate the comparison of the WFPC2 and ACS photometric systems, which will be important as WFPC2 is phased out and ACS becomes HST's primary imager.

  11. Etiology of myofascial trigger points

    NARCIS (Netherlands)

    Bron, C.; Dommerholt, J.D.

    2012-01-01

    Myofascial pain syndrome (MPS) is described as the sensory, motor, and autonomic symptoms caused by myofascial trigger points (TrPs). Knowing the potential causes of TrPs is important to prevent their development and recurrence, but also to inactivate and eliminate existing TrPs. There is general

  12. Fixed points of quantum gravity

    OpenAIRE

    Litim, D F

    2003-01-01

    Euclidean quantum gravity is studied with renormalisation group methods. Analytical results for a non-trivial ultraviolet fixed point are found for arbitrary dimensions and gauge fixing parameter in the Einstein-Hilbert truncation. Implications for quantum gravity in four dimensions are discussed.

  13. Fixed points of zircon automorphisms

    OpenAIRE

    Hultman, Axel

    2007-01-01

    A zircon is a poset in which every principal order ideal is finite and equipped with a so-called special matching. We prove that the subposet induced by the fixed points of any automorphism of a zircon is itself a zircon. This provides a natural context in which to view recent results on Bruhat orders on twisted involutions in Coxeter groups.

  14. The Philosophy of Turning Points

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    2013-01-01

    This paper introduces and discusses the concept of turning points from the ontological, epistemological, and methodological perspectives, applying it to the de-internationalization phenomenon to exemplify its deployment. As a concept that adds to the variance and complexity of the international b...

  15. Equations for arithmetic pointed tori

    NARCIS (Netherlands)

    Sijsling, J.R.

    2010-01-01

    In 1983, Kisao Takeuchi enumerated all 71 arithmetic (1;e)-groups. This is a special set of discrete subgroups of SL(2,R) of finite covolume and signature (1;e). The corresponding quotients of the upper half plane (called (1;e)-curves) have genus equal to 1 and a single elliptic point of order e.

  16. Modelling point patterns with linear structures

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    2009-01-01

    processes whose realizations contain such linear structures. Such a point process is constructed sequentially by placing one point at a time. The points are placed in such a way that new points are often placed close to previously placed points, and the points form roughly line shaped structures. We...

  17. Zero Point of Historical Time

    Directory of Open Access Journals (Sweden)

    R.S. Khakimov

    2014-02-01

    Full Text Available Historical studies are based on the assumption that there is a reference-starting point of the space-time – the Zero point of coordinate system. Due to the bifurcation in the Zero Point, the course of social processes changes sharply and the probabilistic causality replaces the deterministic one. For this reason, changes occur in the structure of social relations and statehood form as well as in the course of the ethnic processes. In such a way emerges a new discourse of the national behavior. With regard to the history of the Tatars and Tatarstan, such bifurcation points occurred in the periods of the formation: 1 of the Turkic Khaganate, which began to exist from the 6th century onward and became a qualitatively new State system that reformatted old elements in the new matrix introducing a new discourse of behavior; 2 of the Volga-Kama Bulgaria, where the rivers (Kama, Volga, Vyatka became the most important trade routes determining the singularity of this State. Here the nomadic culture was connected with the settled one and Islam became the official religion in 922; 3 and of the Golden Hordе, a powerful State with a remarkable system of communication, migration of huge human resources for thousands of kilometers, and extensive trade, that caused severe “mutations” in the ethnic terms and a huge mixing of ethnic groups. Given the dwelling space of Tatar population and its evolution within Russia, it can be argued that the Zero point of Tatar history, which conveyed the cultural invariants until today, begins in the Golden Horde. Neither in the Turkic khaganate nor in the Bulgar State, but namely in the Golden Horde. Despite the radical changes, the Russian Empire failed to transform the Tatars in the Russians. Therefore, contemporary Tatars preserved the Golden Horde tradition as a cultural invariant.

  18. Estimating the size of a methane emission point source at different scales: from local to landscape

    Science.gov (United States)

    Riddick, Stuart N.; Connors, Sarah; Robinson, Andrew D.; Manning, Alistair J.; Jones, Pippa S. D.; Lowry, David; Nisbet, Euan; Skelton, Robert L.; Allen, Grant; Pitt, Joseph; Harris, Neil R. P.

    2017-06-01

    High methane (CH4) mixing ratios (up to 4 ppm) have occurred sporadically at our measurement site in Haddenham, Cambridgeshire, since July 2012. Isotopic measurements and back trajectories show that the source is the Waterbeach Waste Management Park 7 km SE of Haddenham. To investigate this further, measurements were made on 30 June and 1 July 2015 at other locations nearer to the source. Landfill emissions have been estimated using three different approaches at different scales; near source using the WindTrax inversion dispersion model, middle distance using a Gaussian plume (GP) model and at the landscape scale using the Numerical Atmospheric Modelling Environment (NAME) Inversion Technique for Emission Modelling (InTEM) inversion. The emission estimates derived using the WindTrax and Gaussian plume (GP) approaches agree well for the period of intense observations. Applying the Gaussian plume approach to all periods of elevated measurements seen at Haddenham produces year-round and monthly landfill emission estimates with an estimated annual emission of 11.6 Gg CH4 yr-1. The monthly emission estimates are highest in winter (2160 kg h-1 in February) and lowest in summer (620 kg h-1 in July). These data identify the effects of environmental conditions on landfill CH4 production and highlight the importance of year-round measurements to capture seasonal variability in CH4 emission.

  19. Multidimensional point transform for public health practice.

    Science.gov (United States)

    AbdelMalik, P; Kamel Boulos, M N

    2012-01-01

    With increases in spatial information and enabling technologies, location-privacy concerns have been on the rise. A commonly proposed solution in public health involves random perturbation, however consideration for individual dimensions (attributes) has been weak. The current study proposes a multidimensional point transform (MPT) that integrates the spatial dimension with other dimensions of interest to comprehensively anonymise data. The MPT relies on the availability of a base population, a subset patient dataset, and shared dimensions of interest. Perturbation distance and anonymity thresholds are defined, as are allowable dimensional perturbations. A preliminary implementation is presented using sex, age and location as the three dimensions of interest, with a maximum perturbation distance of 1 kilometre and an anonymity threshold of 20%. A synthesised New York county population is used for testing with 1000 iterations for each of 25, 50, 100, 200 and 400 patient dataset sizes. The MPT consistently yielded a mean perturbation distance of 46 metres with no sex or age perturbation required. Displacement of the spatial mean decreased with patient dataset size and averaged 5.6 metres overall. The MPT presents a flexible, customisable and adaptive algorithm for perturbing datasets for public health, allowing tweaking and optimisation of the trade-offs for different datasets and purposes. It is not, however, a substitute for secure and ethical conduct, and a public health framework for the appropriate disclosure, use and dissemination of data containing personal identifiable information is required. The MPT presents an important component of such a framework.

  20. Jump point detection for real estate investment success

    Science.gov (United States)

    Hui, Eddie C. M.; Yu, Carisa K. W.; Ip, Wai-Cheung

    2010-03-01

    In the literature, studies on real estate market were mainly concentrating on the relation between property price and some key factors. The trend of the real estate market is a major concern. It is believed that changes in trend are signified by some jump points in the property price series. Identifying such jump points reveals important findings that enable policy-makers to look forward. However, not all jump points are observable from the plot of the series. This paper looks into the trend and introduces a new approach to the framework for real estate investment success. The main purpose of this paper is to detect jump points in the time series of some housing price indices and stock price index in Hong Kong by applying the wavelet analysis. The detected jump points reflect to some significant political issues and economic collapse. Moreover, the relations among properties of different classes and between stocks and properties are examined. It can be shown from the empirical result that a lead-lag effect happened between the prices of large-size property and those of small/medium-size property. However, there is no apparent relation or consistent lead in terms of change point measure between property price and stock price. This may be due to the fact that globalization effect has more impact on the stock price than the property price.

  1. FIGHT ZONE WITH POINTS OF THE SHOTOKAN KARATE FEMALE COMPETITION

    Directory of Open Access Journals (Sweden)

    Nelson Kautzner Marques Junior

    2014-04-01

    Full Text Available The objective of the study was to determine the fight zone with point during the female kumite of competition. This study used a quantitative research for identify the fight zone with point (ippon or waza-ari or not during the female kumite of competition. Were selected on the Internet several championship of kumite of the JKA and of the ITKF. The study detected a high probability of point in the zone 7 and in the zone 2. The study determined that the most points at the corner occurred when the karateka practiced the attack in fight zone. Kruskal-Wallis ANOVA verified significant difference between the fight zone with points, H (10 = 29,49, p = 0,001. The Mann Whitney U test detected significant difference between the zone 5 with waza-ari versus all the zone. The greatest number of points in the fight zone was in agreement with the size of the fight zone. The central zone or zone 5 has 6x6 m, during the female kumite occurred more points, total of 68 waza-aris and 5 ippons. The study on the fight zone with points of the female kumite permits that the karateka has knowledge about the combat zones and guides the karateka before, during and after the female kumite. However, more studies should be done to confirm these findings.

  2. Characterization of MIPAS elevation pointing

    Directory of Open Access Journals (Sweden)

    M. Kiefer

    2007-01-01

    Full Text Available Sufficient knowledge of the pointing is essential for analyses of limb emission measurements. The scientific retrieval processor for MIPAS on ENVISAT operated at IMK allows the retrieval of pointing information in terms of tangent altitudes along with temperature. The retrieved tangent altitudes are independent of systematic offsets in the engineering Line-Of-Sight (LOS information delivered with the ESA Level 1b product. The difference of pointing retrieved from the reprocessed high resolution MIPAS spectra and the engineering pointing information was examined with respect to spatial/temporal behaviour. Among others the following characteristics of MIPAS pointing could be identified: Generally the engineering tangent altitudes are too high by 0–1.8 km with conspicuous variations in this range over time. Prior to December of 2003 there was a drift of about 50–100 m/h, which was due to a slow change in the satellite attitude. A correction of this attitude is done twice a day, which leads to discontinuities in the order of 1–1.5 km in the tangent altitudes. Occasionally discontinuities up to 2.5 km are found, as already reported from MIPAS and SCIAMACHY observations. After an update of the orbit position software in December 2003 values of drift and jumps are much reduced. There is a systematic difference in the mispointing between the poles which amounts to 1.5–2 km, i.e. there is a conspicuous orbit-periodic feature. The analysis of the correlation between the instrument's viewing angle azimuth and differential mispointing supports the hypotheses that a major part of this latter phenomenon can be attributed to an error in the roll angle of the satellite/instrument system of approximately 42 mdeg. One conclusion is that ESA level 2 data should be compared to other data exclusively on tangent pressure levels. Complementary to IMK data, ESA operational LOS calibration results were used to characterize MIPAS pointing. For this purpose

  3. Analisa Sistem Proteksi dengan Metode Perhitungan ARC-Flash yang Dimodifikasi untuk Diaplikasikan pada Sistem Tegangan Menengah di PT. Pupuk Kaltim Unit I (PKT I

    Directory of Open Access Journals (Sweden)

    Rahmat Riyadi

    2012-09-01

    Full Text Available Berdasarkan standar IEEE 1584-2002 yang mengatur tentang analisa bahaya busur api (arc-flash pada sistem tegangan rendah dan menengah, pengguna dapat dengan mudah menentukan batas keamanan untuk para pekerja. Namun, perlu diperhatikan bahwa standar yang ada diperoleh dari hasil pengukuran insiden energi busur api pada kondisi tertentu dan dikombinasikan dengan teori. Menurut rekomendasi standar IEEE, perhitungan arus hubung singkat selalu memperhatikan kontribusi arus gangguan dari generator, motor induksi dan sinkron. Besar kecilnya energi arc-flash dapat ditentukan dari beberapa sudut pandang. Diantaranya ialah nilai energi arc-flash akan besar apabila dihitung dengan menggunakan arus bolted three-phase fault, sedangkan dari sudut pandang arc-clearing time yang didapat dari waktu dimana arus gangguan saat itu terjadi akan menghasilkan nilai energi busur api yang lebih rendah. Hal ini memunculkan metode perhitungan modifikasi yang didasarkan pada perhitungan kontribusi arus hubung singkat dan waktu pemadaman busur api (arc-clearing time sehingga besar energi busur api yang dihasilkan lebih rendah dari perhitungan standar IEEE 1584-2002. Hal tersebut dapat dijadikan sebagai acuan untuk perbaikan sistem pengaman.

  4. Sizing and fit of bra's

    NARCIS (Netherlands)

    Daanen, H.A.M.

    2007-01-01

    It is often reported that 70% or more of women wear the wrong-sized bra. A fact is that many women complain about bra fit even though the number of available sizes varies from 20 to 100. Sizing of bras is based on under bust circumference and its difference with circumference over the bust (cup

  5. Is clutch size individually optimized?

    NARCIS (Netherlands)

    Tinbergen, J.M.; Both, C.

    1999-01-01

    Brood size manipulations were carried out to test whether clutch size variation in individual great tits (Parus major) controlled for laying date was tuned to their phenotypic quality and/or local food abundance (individual optimization hypothesis; IOH). Broods with different original clutch sizes,

  6. Good points for diophantine approximation

    Indian Academy of Sciences (India)

    n=1 of real numbers in the interval [0, 1) and a sequence. (δn)∞ n=1 of positive numbers tending to zero, we consider the size of the set of numbers in [0, 1] which can be 'well approximated' by terms of the first sequence, namely, those y ∈ [0, 1] for which the inequality |y − xn| < δn holds for infinitely many positive integers n ...

  7. Limits in point to point resolution of MOS based pixels detector arrays

    Science.gov (United States)

    Fourches, N.; Desforge, D.; Kebbiri, M.; Kumar, V.; Serruys, Y.; Gutierrez, G.; Leprêtre, F.; Jomard, F.

    2018-01-01

    In high energy physics point-to-point resolution is a key prerequisite for particle detector pixel arrays. Current and future experiments require the development of inner-detectors able to resolve the tracks of particles down to the micron range. Present-day technologies, although not fully implemented in actual detectors, can reach a 5-μm limit, this limit being based on statistical measurements, with a pixel-pitch in the 10 μm range. This paper is devoted to the evaluation of the building blocks for use in pixel arrays enabling accurate tracking of charged particles. Basing us on simulations we will make here a quantitative evaluation of the physical and technological limits in pixel size. Attempts to design small pixels based on SOI technology will be briefly recalled here. A design based on CMOS compatible technologies that allow a reduction of the pixel size below the micrometer is introduced here. Its physical principle relies on a buried carrier-localizing collecting gate. The fabrication process needed by this pixel design can be based on existing process steps used in silicon microelectronics. The pixel characteristics will be discussed as well as the design of pixel arrays. The existing bottlenecks and how to overcome them will be discussed in the light of recent ion implantation and material characterization experiments.

  8. Femtosecond photoelectron point projection microscope

    International Nuclear Information System (INIS)

    Quinonez, Erik; Handali, Jonathan; Barwick, Brett

    2013-01-01

    By utilizing a nanometer ultrafast electron source in a point projection microscope we demonstrate that images of nanoparticles with spatial resolutions of the order of 100 nanometers can be obtained. The duration of the emission process of the photoemitted electrons used to make images is shown to be of the order of 100 fs using an autocorrelation technique. The compact geometry of this photoelectron point projection microscope does not preclude its use as a simple ultrafast electron microscope, and we use simple analytic models to estimate temporal resolutions that can be expected when using it as a pump-probe ultrafast electron microscope. These models show a significant increase in temporal resolution when comparing to ultrafast electron microscopes based on conventional designs. We also model the microscopes spectroscopic abilities to capture ultrafast phenomena such as the photon induced near field effect

  9. Le Point sur... Astronomie IV

    Science.gov (United States)

    Pecker, J.-C.

    Cet ouvrage regroupe des articles de mise au point sollicités par le rédacteur en chef de la rubrique Astronomie des Comptes rendus de l'Académie des sciences. Les textes se proposent de faire découvrir aux lecteurs, dans les principales disciplines de l'astronomie, les résultats les plus remarquables des dernières années.Leurs auteurs sont des spécialistes participant activement à l'accroissement des connaissances dans des domaines faisant l'objet de recherches intensives. Ces mises au point sur des questions particulièrement importantes de l'astronomie sont rédigées soit en français, soit en anglais et accompagnées d'une bibliographie détaillée.

  10. Le Point sur... Astronomie III

    Science.gov (United States)

    Pecker, J.-C.

    Ce fascicule contient l'ensemble des textes du débat sur la cosmologie du big-bang entre Joseph Silk, Jayant V. Narlikar, arbitrés par Jean-Claude Pecker. Il regroupe également des articles de mise au point sollicités par le rédacteur en chef de la rubrique Astronomie des Comptes rendus de l'Académie des sciences. Les textes se proposent de faire découvrir aux lecteurs, dans les principales disciplines de l'astronomie, les résultats les plus remarquables des dernières années. Ces mises au point sur des questions particulièrement importantes de l'astronomie sont rédigées soit en francais, soit en anglais et accompagnèes d'une bibliographie dètaillèe.

  11. Point-of-Care Platforms

    Science.gov (United States)

    Gauglitz, Günter

    2014-06-01

    Point-of-care applications are gaining increasing interest in clinical diagnostics and emergency applications. Biosensors are used to monitor the biomolecular interaction process between a disease biomarker and a recognition element such as a reagent. Essential are the quality and selectivity of the recognition elements and assay types used to improve sensitivity and to avoid nonspecific interactions. In addition, quality measures are influenced by the detection principle and the evaluation strategies. For these reasons, this review provides a survey and validation of recognition elements, assays, and various types of detection methods for point-of-care testing (POCT) platforms. Common applications of clinical parameters are discussed and considered. In this ever-changing field, a snapshot of current applications is needed. We provide such a snapshot by way of a table including literature citations and also discuss these applications in more detail throughout.

  12. Leverage points for sustainability transformation.

    Science.gov (United States)

    Abson, David J; Fischer, Joern; Leventon, Julia; Newig, Jens; Schomerus, Thomas; Vilsmaier, Ulli; von Wehrden, Henrik; Abernethy, Paivi; Ives, Christopher D; Jager, Nicolas W; Lang, Daniel J

    2017-02-01

    Despite substantial focus on sustainability issues in both science and politics, humanity remains on largely unsustainable development trajectories. Partly, this is due to the failure of sustainability science to engage with the root causes of unsustainability. Drawing on ideas by Donella Meadows, we argue that many sustainability interventions target highly tangible, but essentially weak, leverage points (i.e. using interventions that are easy, but have limited potential for transformational change). Thus, there is an urgent need to focus on less obvious but potentially far more powerful areas of intervention. We propose a research agenda inspired by systems thinking that focuses on transformational 'sustainability interventions', centred on three realms of leverage: reconnecting people to nature, restructuring institutions and rethinking how knowledge is created and used in pursuit of sustainability. The notion of leverage points has the potential to act as a boundary object for genuinely transformational sustainability science.

  13. Time-based lateral hygroscopic expansion of a water-expandable endodontic obturation point.

    Science.gov (United States)

    Didato, Anthony; Eid, Ashraf A; Levin, Martin D; Khan, Sara; Tay, Franklin R; Rueggeberg, Frederick A

    2013-09-01

    This study compared the time-based lateral expansion of two sizes and two batches of water-expandable obturation points (CPoint, EndoTechnologies, LLC) and a similar-sized gutta-percha point (control) at various distances from the point apex: 5, 10, and 15mm. Two batches of sizes 25 and 40 (0.06 taper) CPoints and a single lot of size 40 (0.06 taper) gutta-percha were tested (N=5). Points were fixed to the bottom of a Petri dish, and digital images of each point location were obtained under 50× magnification, which also captured a calibrated linear scale reticule. After imaging each dry cone location, 10mL of water was added, and images were obtained at various time points: 20 and 40min, 1, 2, 3, 4, 5, 6, 7, 8, and 24h. Between measurements, dishes were stored at 37°C. Side-to-side dimension of each point was determined using imaging software No significant differences (p>0.05) in lateral dimension at each tip distance between batches of similar-sized CPoint samples were found (2-tailed unpaired Student's t-test). Changes in CPoint dimension were significantly higher (p0.05). When exposed to water, the lateral expansion of a new hydrophilic endodontic obturation point significantly increases in dimension within 20min, whereas a conventional gutta-percha point does not. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Microcurrent Point Stimulation Applied to Lower Back Acupuncture Points for the Treatment of Nonspecific Neck Pain.

    Science.gov (United States)

    Armstrong, Kelly; Gokal, Raman; Chevalier, Antoine; Todorsky, William; Lim, Mike

    2017-04-01

    Although acupuncture and microcurrent are widely used for chronic pain, there remains considerable controversy as to their therapeutic value for neck pain. We aimed to determine the effect size of microcurrent applied to lower back acupuncture points to assess the impact on the neck pain. This was a cohort analysis of treatment outcomes pre- and postmicrocurrent stimulation, involving 34 patients with a history of nonspecific chronic neck pain. Consenting patients were enrolled from a group of therapists attending educational seminars and were asked to report pain levels pre-post and 48 hours after a single MPS application. Direct current microcurrent point stimulation (MPS) applied to standardized lower back acupuncture protocol points was used. Evaluations entailed a baseline visual analog scale (VAS) pain scale assessment, using a VAS, which was repeated twice after therapy, once immediately postelectrotherapy and again after a 48-h follow-up period. All 34 patients received a single MPS session. Results were analyzed using paired t tests. Results and Outcomes: Pain intensity showed an initial statistically significant reduction of 68% [3.9050 points; 95% CI (2.9480, 3.9050); p = 0.0001], in mean neck pain levels after standard protocol treatment, when compared to initial pain levels. There was a further statistically significant reduction of 35% in mean neck pain levels at 48 h when compared to pain levels immediately after standard protocol treatment [0.5588 points; 95% CI (0.2001, 0.9176); p = 0.03], for a total average pain relief of 80%. The positive results in this study could have applications for those patients impacted by chronic neck pain.

  15. Turning points in reactor design

    Energy Technology Data Exchange (ETDEWEB)

    Beckjord, E.S.

    1995-09-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

  16. Spacecraft Pointing and Position Control,

    Science.gov (United States)

    1981-11-01

    in the rotor coordinate is evaluated as * = tan - 1 (SRy/ SR .) and [-]T denotes a matrix transpose. Rotor spin rate w can be measured by the gyros...Bierman, L. A. Campbell, W. A. Feess, Consultant to The Member of the Technial Staff Sr . Engineering Specialist Aerospace Corporation The Aerospace...Sciences, Vol. 27, No. 2, April-June, 1979, pp. 131-156. 14. Nadkarni , A. A. and Joshi, S. M.: Optimal Maneuvering and Fine-Pointing Control of Large

  17. The point of 6 sigma

    International Nuclear Information System (INIS)

    An, Yeong Jin

    2000-07-01

    This book gives descriptions of the point of 6 sigma. These are the titles of this : what 6 sigma is, sigma conception, motor roller 3.4 ppm, centering error, 6 sigma purpose, 6 sigma principle, eight steps of innovation strategy, 6 sigma innovation strategy of easy system step, measurement standard of 6 sigma outcome, the main role of 6 sigma, acknowledgment and reword, 6 sigma characteristic, 6 sigma effect, 6 sigma application and problems which happen when 6 sigma introduces.

  18. Turning points in reactor design

    International Nuclear Information System (INIS)

    Beckjord, E.S.

    1995-01-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems

  19. Emergent physics: Fermi point scenario

    OpenAIRE

    Volovik, G. E.

    2008-01-01

    The Fermi-point scenario of emergent gravity has the following consequences: gravity emerges together with fermionic and bosonic matter; emergent fermionic matter consists of massless Weyl fermions; emergent bosonic matter consists of gauge fields; Lorentz symmetry persists well above the Planck energy; space-time is naturally 4-dimensional; Universe is naturally flat; cosmological constant is naturally small or zero; underlying physics is based on discrete symmetries; `quantum gravity' canno...

  20. Change point analysis and assessment

    DEFF Research Database (Denmark)

    Müller, Sabine; Neergaard, Helle; Ulhøi, John Parm

    2011-01-01

    The aim of this article is to develop an analytical framework for studying processes such as continuous innovation and business development in high-tech SME clusters that transcends the traditional qualitative-quantitative divide. It integrates four existing and well-recognized approaches to stud...... to studying events, processes and change, mamely change-point analysis, event-history analysis, critical-incident technique and sequence analysis....

  1. A fixed-point farrago

    CERN Document Server

    Shapiro, Joel H

    2016-01-01

    This text provides an introduction to some of the best-known fixed-point theorems, with an emphasis on their interactions with topics in analysis. The level of exposition increases gradually throughout the book, building from a basic requirement of undergraduate proficiency to graduate-level sophistication. Appendices provide an introduction to (or refresher on) some of the prerequisite material and exercises are integrated into the text, contributing to the volume’s ability to be used as a self-contained text. Readers will find the presentation especially useful for independent study or as a supplement to a graduate course in fixed-point theory. The material is split into four parts: the first introduces the Banach Contraction-Mapping Principle and the Brouwer Fixed-Point Theorem, along with a selection of interesting applications; the second focuses on Brouwer’s theorem and its application to John Nash’s work; the third applies Brouwer’s theorem to spaces of infinite dimension; and the fourth rests ...

  2. Heat radiation and transfer for point particles in arbitrary geometries

    Science.gov (United States)

    Asheichyk, Kiryl; Müller, Boris; Krüger, Matthias

    2017-10-01

    We study heat radiation and heat transfer for pointlike particles in a system of other objects. Starting from exact many-body expressions found from scattering theory and fluctuational electrodynamics, we find that transfer and radiation for point particles are given in terms of the Green's function of the system in the absence of the point particles. These general expressions contain no approximation for the surrounding objects. As an application, we compute the heat transfer between two point particles in the presence of a sphere of arbitrary size and show that the transfer is enhanced by several orders of magnitude through the presence of the sphere, depending on the materials. Furthermore, we compute the heat emission of a point particle in front of a planar mirror. Finally, we show that a particle placed inside a spherical mirror cavity does not radiate energy.

  3. Why Bond Critical Points Are Not "Bond" Critical Points.

    Science.gov (United States)

    Shahbazian, Shant

    2017-12-28

    Equating (3,-1) critical points (CPs), derived from the topological analysis of the electron densities, to chemical bonds has triggered a lot of confusion in recent years. Part of this confusion stems from calling these CPs "bond" CPs (BCPs). While the origin of this terminology is traceable to the late seventies and beginning of eighties, when it sounded reasonable, new computational studies conducted on molecular electron densities cast serious doubt on the supposed universal equivalence between the chemical bonds and (3,-1) CPs. Herein, recent computational studies are briefly reviewed to demonstrate why (3,-1) CPs are not indicators of chemical bonds. It is discussed why this confusing terminology needs to be changed and reemphasized that (3,-1) CPs should be called "line" critical points (LCPs). The proposed terminology detaches the topological properties of molecular electron densities from any a priori chemical interpretation. Such detachment, if adopted by other authors, will hopefully prevent further misinterpretation of the data emerging from the quantum theory of atoms in molecules (QTAIM). © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Postglacial sedimentary record of the Southern California continental shelf and slope, Point Conception to Dana Point

    Science.gov (United States)

    Sommerfield, C.K.; Lee, H.J.; Normark, W.R.

    2009-01-01

    Sedimentary strata on the Southern California shelf and slope (Point Conception to Dana Point) display patterns and rates of sediment accumulation that convey information on sea-level inundation, sediment supply, and oceanic transport processes following the Last Glacial Maximum. In Santa Monica Bay and San Pedro Bay, postglacial transgression is recorded in shelf deposits by wave-ravinement surfaces dated at 13-11 ka and an upsection transition from coastal to shallow-marine sediment facies. Depositional conditions analogous to the modern environment were established in the bays by 8-9 ka. On the continental slope, transgression is evidenced in places by an increase in sediment grain size and accumulation rate ca. 15-10 ka, a consequence of coastal ravinement and downslope resedimentation, perhaps in conjunction with climatic increases in fluvial sediment delivery. Grain sizes and accumulation rates then decreased after 12-10 ka when the shelf flooded and backfilled under rising sea level. The Santa Barbara coastal cell contains the largest mass of postglacial sediment at 32-42 ?? 109 metric tons, most of which occurs between offshore Santa Barbara and Hueneme Canyon. The San Pedro cell contains the second largest quantity of sediment, 8-11 ?? 109 metric tons, much of which is present on the eastern Palos Verdes and outer San Pedro shelves. By comparison, the mass of sediment sequestered within the Santa Monica cell is smaller at ??6-8 ?? 109 metric tons. The postglacial sediment mass distribution among coastal cells reflects the size of local fluvial sediment sources, whereas intracell accumulation patterns reflect antecedent bathymetric features conducive for sediment bypass or trapping. ?? 2009 The Geological Society of America.

  5. Asymptotic size determines species abundance in the marine size spectrum

    DEFF Research Database (Denmark)

    Andersen, Ken Haste; Beyer, Jan

    2006-01-01

    The majority of higher organisms in the marine environment display indeterminate growth; that is, they continue to grow throughout their life, limited by an asymptotic size. We derive the abundance of species as a function of their asymptotic size. The derivation is based on size-spectrum theory......, where population structure is derived from physiology and simple arguments regarding the predator-prey interaction. Using a hypothesis of constant satiation, which states that the average degree of satiation is independent of the size of an organism, the number of individuals with a given size is found...... to be proportional to the weight raised to the power -2.05, independent of the predator/prey size ratio. This is the first time the spectrum exponent has been derived solely on the basis of processes at the individual level. The theory furthermore predicts that the parameters in the von Bertalanffy growth function...

  6. Finite size effects in the intermittency analysis of the fragment-size correlations

    International Nuclear Information System (INIS)

    Bozek, P.; Ploszajczak, M.; Tucholski, A.

    1991-01-01

    An influence of the finite size effect on the fragment-size correlations in the nuclear multifragmentation is studied using the method of scaled factorial moments for a 1 - dim percolation model and for a statistical model of the fragmentation process, which for a certain value of a tuning parameter yields the power-law behaviour of the fragment-size distribution. It is shown that the statistical models of this type contain only repulsive correlations due to the conservation laws. The comparison of the results with those obtained in the non-critical 1 - dim percolation and in the 3 - dim percolation at around the critical point is presented. Correlations in the 1 - dim percolation model are analysed analytically and the mechanism of the attractive correlations in 1 - dim and 3 - dim is identified. (author) 30 refs., 7 figs

  7. Sauropod dinosaurs evolved moderately sized genomes unrelated to body size.

    Science.gov (United States)

    Organ, Chris L; Brusatte, Stephen L; Stein, Koen

    2009-12-22

    Sauropodomorph dinosaurs include the largest land animals to have ever lived, some reaching up to 10 times the mass of an African elephant. Despite their status defining the upper range for body size in land animals, it remains unknown whether sauropodomorphs evolved larger-sized genomes than non-avian theropods, their sister taxon, or whether a relationship exists between genome size and body size in dinosaurs, two questions critical for understanding broad patterns of genome evolution in dinosaurs. Here we report inferences of genome size for 10 sauropodomorph taxa. The estimates are derived from a Bayesian phylogenetic generalized least squares approach that generates posterior distributions of regression models relating genome size to osteocyte lacunae volume in extant tetrapods. We estimate that the average genome size of sauropodomorphs was 2.02 pg (range of species means: 1.77-2.21 pg), a value in the upper range of extant birds (mean = 1.42 pg, range: 0.97-2.16 pg) and near the average for extant non-avian reptiles (mean = 2.24 pg, range: 1.05-5.44 pg). The results suggest that the variation in size and architecture of genomes in extinct dinosaurs was lower than the variation found in mammals. A substantial difference in genome size separates the two major clades within dinosaurs, Ornithischia (large genomes) and Saurischia (moderate to small genomes). We find no relationship between body size and estimated genome size in extinct dinosaurs, which suggests that neutral forces did not dominate the evolution of genome size in this group.

  8. Limits in multi-point forming based on a small scaled flexible 9-point die device

    Science.gov (United States)

    Maier, Petra; Ruback, Christian; Rümmler, Paul; Schellhorn, Harry

    2017-10-01

    Being more flexible in the shaping of the work-piece, multi-point forming based on flexible multi-point dies is gaining interest as a manufacturing technique for 3D sheet metal. The shapes of the dies can be changed according to requirements and the punches are composed of a pair of reconfigurable dies. In this study, a small scale flexible 9-point die device at a laboratory scale is used for experiments. Only the middle punch can be controlled. The other dies fix the sheet metal, either all 8 or only the 4 corner ones. The forming limit is defined when wrinkling or dimpling is observed. Force-displacement curves are monitored and give information about the amount of spring back. Curve characteristics give information about the amount of wrinkling. In agreement with the literature the springback effect decreases with increasing plastic deformation. Optical 3D surface measurements are used to compare target to actual deformation. A second focus in this study is the pressure distribution of the contact area of the punch head and work piece. Hardness measurements are used to determine the amount of strain hardening and the size of hardened area around the controlled middle die as well as the fixing dies. These values are compared to the contact force evaluated using FEM, which also gives information about the force in dependence on the sheet thickness and deformation degree.

  9. Ontogenetic prey size selection in snakes: predator size and functional limitations to handling minimum prey sizes.

    Science.gov (United States)

    Hampton, Paul M

    2018-02-01

    As body size increases, some predators eliminate small prey from their diet exhibiting an ontogenetic shift toward larger prey. In contrast, some predators show a telescoping pattern of prey size in which both large and small prey are consumed with increasing predator size. To explore a functional explanation for the two feeding patterns, I examined feeding effort as both handling time and number of upper jaw movements during ingestion of fish of consistent size. I used a range of body sizes from two snake species that exhibit ontogenetic shifts in prey size (Nerodia fasciata and N. rhombifer) and a species that exhibits telescoping prey size with increased body size (Thamnophis proximus). For the two Nerodia species, individuals with small or large heads exhibited greater difficulty in feeding effort compared to snakes of intermediate size. However, for T. proximus measures of feeding effort were negatively correlated with head length and snout-vent length (SVL). These data indicate that ontogenetic shifters of prey size develop trophic morphology large enough that feeding effort increases for disproportionately small prey. I also compared changes in body size among the two diet strategies for active foraging snake species using data gleaned from the literature to determine if increased change in body size and thereby feeding morphology is observable in snakes regardless of prey type or foraging habitat. Of the 30 species sampled from literature, snakes that exhibit ontogenetic shifts in prey size have a greater magnitude of change in SVL than species that have telescoping prey size patterns. Based upon the results of the two data sets above, I conclude that ontogenetic shifts away from small prey occur in snakes due, in part, to growth of body size and feeding structures beyond what is efficient for handling small prey. Copyright © 2017. Published by Elsevier GmbH.

  10. Point-point and point-line moving-window correlation spectroscopy and its applications

    Science.gov (United States)

    Zhou, Qun; Sun, Suqin; Zhan, Daqi; Yu, Zhiwu

    2008-07-01

    In this paper, we present a new extension of generalized two-dimensional (2D) correlation spectroscopy. Two new algorithms, namely point-point (P-P) correlation and point-line (P-L) correlation, have been introduced to do the moving-window 2D correlation (MW2D) analysis. The new method has been applied to a spectral model consisting of two different processes. The results indicate that P-P correlation spectroscopy can unveil the details and re-constitute the entire process, whilst the P-L can provide general feature of the concerned processes. Phase transition behavior of dimyristoylphosphotidylethanolamine (DMPE) has been studied using MW2D correlation spectroscopy. The newly proposed method verifies that the phase transition temperature is 56 °C, same as the result got from a differential scanning calorimeter. To illustrate the new method further, a lysine and lactose mixture has been studied under thermo perturbation. Using the P-P MW2D, the Maillard reaction of the mixture was clearly monitored, which has been very difficult using conventional display of FTIR spectra.

  11. The Point Lepreau Desktop Simulator

    International Nuclear Information System (INIS)

    MacLean, M.; Hogg, J.; Newman, H.

    1997-01-01

    The Point Lepreau Desktop Simulator runs plant process modeling software on a 266 MHz single CPU DEC Alpha computer. This same Alpha also runs the plant control computer software on an SSCI 125 emulator. An adjacent Pentium PC runs the simulator's Instructor Facility software, and communicates with the Alpha through an Ethernet. The Point Lepreau Desktop simulator is constructed to be as similar as possible to the Point Lepreau full scope training simulator. This minimizes total maintenance costs and enhances the benefits of the desktop simulator. Both simulators have the same modeling running on a single CPU in the same schedule of calculations. Both simulators have the same Instructor Facility capable of developing and executing the same lesson plans, doing the same monitoring and control of simulations, inserting all the same malfunctions, performing all the same overrides, capable of making and restoring all the same storepoints. Both simulators run the same plant control computer software - the same assembly language control programs as the power plant uses for reactor control, heat transport control, annunciation, etc. This is a higher degree of similarity between a desktop simulator and a full scope training simulator than previously reported for a computer controlled nuclear plant. The large quantity of control room hardware missing from the desktop simulator is replaced by software. The Instructor Facility panel override software of the training simulator provides the means by which devices (switches, controllers, windows, etc.) on the control room panels can be controlled and monitored in the desktop simulator. The CRT of the Alpha provides a mouse operated DCC keyboard mimic for controlling the plant control computer emulation. Two emulated RAMTEK display channels appear as windows for monitoring anything of interest on plant DCC displays, including one channel for annunciation. (author)

  12. Growth points in nuclear physics

    CERN Document Server

    Hodgson, Peter Edward

    1980-01-01

    Growth Points in Nuclear Physics, Volume 2 covers the progress in the fields of nuclear structure and nuclear reactions. This book is composed of three chapters. The first chapter is devoted to nuclear forces and potentials, in particular the optical model potential that enables the elastic scattering of many particles by nuclei to be calculated in a very simple manner. This chapter also deals with the three-body forces and the spin dependence of the nuclear potential. The second chapter describes higher order processes involving two or more stages, specifically their intrinsic interest and th

  13. Perception of biological motion from size-invariant body representations

    Directory of Open Access Journals (Sweden)

    Markus eLappe

    2015-03-01

    Full Text Available The visual recognition of action is one of the socially most important and computationally demanding capacities of the human visual system. It combines visual shape recognition with complex non-rigid motion perception. Action presented as a point-light animation is a striking visual experience for anyone who sees it for the first time. Information about the shape and posture of the human body is sparse in point-light animations, but it is essential for action recognition. In the posturo-temporal filter model of biological motion perception posture information is picked up by visual neurons tuned to the form of the human body before body motion is calculated. We tested whether point-light stimuli are processed through posture recognition of the human body form by using a typical feature of form recognition, namely size invariance. We constructed a point-light stimulus that can only be perceived through a size-invariant mechanism. This stimulus changes rapidly in size from one image to the next. It thus disrupts continuity of early visuo-spatial properties but maintains continuity of the body posture representation. Despite this massive manipulation at the visuo-spatial level, size-changing point-light figures are spontaneously recognized by naive observers, and support discrimination of human body motion.

  14. Perception of biological motion from size-invariant body representations.

    Science.gov (United States)

    Lappe, Markus; Wittinghofer, Karin; de Lussanet, Marc H E

    2015-01-01

    The visual recognition of action is one of the socially most important and computationally demanding capacities of the human visual system. It combines visual shape recognition with complex non-rigid motion perception. Action presented as a point-light animation is a striking visual experience for anyone who sees it for the first time. Information about the shape and posture of the human body is sparse in point-light animations, but it is essential for action recognition. In the posturo-temporal filter model of biological motion perception posture information is picked up by visual neurons tuned to the form of the human body before body motion is calculated. We tested whether point-light stimuli are processed through posture recognition of the human body form by using a typical feature of form recognition, namely size invariance. We constructed a point-light stimulus that can only be perceived through a size-invariant mechanism. This stimulus changes rapidly in size from one image to the next. It thus disrupts continuity of early visuo-spatial properties but maintains continuity of the body posture representation. Despite this massive manipulation at the visuo-spatial level, size-changing point-light figures are spontaneously recognized by naive observers, and support discrimination of human body motion.

  15. Point DCT VLSI Architecture for Emerging HEVC Standard

    OpenAIRE

    Ahmed, Ashfaq; Shahid, Muhammad Usman; Rehman, Ata ur

    2012-01-01

    This work presents a flexible VLSI architecture to compute the -point DCT. Since HEVC supports different block sizes for the computation of the DCT, that is, 4 × 4 up to 3 2 × 3 2 , the design of a flexible architecture to support them helps reducing the area overhead of hardware implementations. The hardware proposed in this work is partially folded to save area and to get speed for large video sequences sizes. The proposed architecture relies on the decomposition of the DCT matrices into ...

  16. Size Matters: Individual Variation in Ectotherm Growth and Asymptotic Size.

    Directory of Open Access Journals (Sweden)

    Richard B King

    Full Text Available Body size, and, by extension, growth has impacts on physiology, survival, attainment of sexual maturity, fecundity, generation time, and population dynamics, especially in ectotherm animals that often exhibit extensive growth following attainment of sexual maturity. Frequently, growth is analyzed at the population level, providing useful population mean growth parameters but ignoring individual variation that is also of ecological and evolutionary significance. Our long-term study of Lake Erie Watersnakes, Nerodia sipedon insularum, provides data sufficient for a detailed analysis of population and individual growth. We describe population mean growth separately for males and females based on size of known age individuals (847 captures of 769 males, 748 captures of 684 females and annual growth increments of individuals of unknown age (1,152 males, 730 females. We characterize individual variation in asymptotic size based on repeated measurements of 69 males and 71 females that were each captured in five to nine different years. The most striking result of our analyses is that asymptotic size varies dramatically among individuals, ranging from 631-820 mm snout-vent length in males and from 835-1125 mm in females. Because female fecundity increases with increasing body size, we explore the impact of individual variation in asymptotic size on lifetime reproductive success using a range of realistic estimates of annual survival. When all females commence reproduction at the same age, lifetime reproductive success is greatest for females with greater asymptotic size regardless of annual survival. But when reproduction is delayed in females with greater asymptotic size, lifetime reproductive success is greatest for females with lower asymptotic size when annual survival is low. Possible causes of individual variation in asymptotic size, including individual- and cohort-specific variation in size at birth and early growth, warrant further

  17. Size Matters: Individual Variation in Ectotherm Growth and Asymptotic Size

    Science.gov (United States)

    King, Richard B.

    2016-01-01

    Body size, and, by extension, growth has impacts on physiology, survival, attainment of sexual maturity, fecundity, generation time, and population dynamics, especially in ectotherm animals that often exhibit extensive growth following attainment of sexual maturity. Frequently, growth is analyzed at the population level, providing useful population mean growth parameters but ignoring individual variation that is also of ecological and evolutionary significance. Our long-term study of Lake Erie Watersnakes, Nerodia sipedon insularum, provides data sufficient for a detailed analysis of population and individual growth. We describe population mean growth separately for males and females based on size of known age individuals (847 captures of 769 males, 748 captures of 684 females) and annual growth increments of individuals of unknown age (1,152 males, 730 females). We characterize individual variation in asymptotic size based on repeated measurements of 69 males and 71 females that were each captured in five to nine different years. The most striking result of our analyses is that asymptotic size varies dramatically among individuals, ranging from 631–820 mm snout-vent length in males and from 835–1125 mm in females. Because female fecundity increases with increasing body size, we explore the impact of individual variation in asymptotic size on lifetime reproductive success using a range of realistic estimates of annual survival. When all females commence reproduction at the same age, lifetime reproductive success is greatest for females with greater asymptotic size regardless of annual survival. But when reproduction is delayed in females with greater asymptotic size, lifetime reproductive success is greatest for females with lower asymptotic size when annual survival is low. Possible causes of individual variation in asymptotic size, including individual- and cohort-specific variation in size at birth and early growth, warrant further investigation. PMID

  18. CERN Open Days 2013, Point 5 - CMS: CMS Experiment

    CERN Multimedia

    CERN Photolab

    2013-01-01

    Stand description: Come to LHC's Point 5 and visit the Compact Muon Solenoid (CMS) experiment that discovered the Higgs boson ! Descend 100 metres underground and take a walk in the cathedral-sized cavern housing the 14,000-tonne CMS detector. Ask Higgs hunters and other scientists just about anything, be it questions about their work, particle physics or the engineering challenges of building CMS.  On surface no restricted access  Point 5 will be abuzz all day long with activities for all ages, including literally "cool" cryogenics shows featuring the world's fastest ice-cream maker, dance performances, and much more.

  19. Processing Terrain Point Cloud Data

    KAUST Repository

    DeVore, Ronald

    2013-01-10

    Terrain point cloud data are typically acquired through some form of Light Detection And Ranging sensing. They form a rich resource that is important in a variety of applications including navigation, line of sight, and terrain visualization. Processing terrain data has not received the attention of other forms of surface reconstruction or of image processing. The goal of terrain data processing is to convert the point cloud into a succinct representation system that is amenable to the various application demands. The present paper presents a platform for terrain processing built on the following principles: (i) measuring distortion in the Hausdorff metric, which we argue is a good match for the application demands, (ii) a multiscale representation based on tree approximation using local polynomial fitting. The basic elements held in the nodes of the tree can be efficiently encoded, transmitted, visualized, and utilized for the various target applications. Several challenges emerge because of the variable resolution of the data, missing data, occlusions, and noise. Techniques for identifying and handling these challenges are developed. © 2013 Society for Industrial and Applied Mathematics.

  20. Effect sizes in memory research.

    Science.gov (United States)

    Morris, Peter E; Fritz, Catherine O

    2013-01-01

    Effect sizes are omitted from many research articles and are rarely discussed. To help researchers evaluate effect sizes we collected values for the more commonly reported effect size measures (partial eta squared and d) from papers reporting memory research published in 2010. Cohen's small, medium, and large generic guideline values for d mapped neatly onto the observed distributions, but his values for partial eta squared were considerably lower than those observed in current memory research. We recommend interpreting effect sizes in the context of either domain-specific guideline values agreed for an area of research or the distribution of effect size estimates from published research in the domain. We provide cumulative frequency tables for both partial eta squared and d enabling authors to report and consider not only the absolute size of observed effects but also the percentage of reported effects that are larger or smaller than those observed.

  1. Address Points - COUNTY_ADDRESS_POINTS_IDHS_IN: Address Points Maintained by County Agencies in Indiana (Indiana Department of Homeland Security, Point feature class)

    Data.gov (United States)

    NSGIC State | GIS Inventory — COUNTY_ADDRESS_POINTS_IDHS_IN is an ESRI Geodatabase point feature class that contains address points maintained by county agencies in Indiana, provided by personnel...

  2. On the Relationship between Pollen Size and Genome Size

    Directory of Open Access Journals (Sweden)

    Charles A. Knight

    2010-01-01

    Full Text Available Here we test whether genome size is a predictor of pollen size. If it were, inferences of ancient genome size would be possible using the abundant paleo-palynolgical record. We performed regression analyses across 464 species of pollen width and genome size. We found a significant positive trend. However, regression analysis using phylogentically independent contrasts did not support the correlated evolution of these traits. Instead, a large split between angiosperms and gymnosperms for both pollen width and genome size was revealed. Sister taxa were not more likely to show a positive contrast when compared to deeper nodes. However, significantly more congeneric species had a positive trend than expected by chance. These results may reflect the strong selection pressure for pollen to be small. Also, because pollen grains are not metabolically active when measured, their biology is different than other cells which have been shown to be strongly related to genome size, such as guard cells. Our findings contrast with previously published research. It was our hope that pollen size could be used as a proxy for inferring the genome size of ancient species. However, our results suggest pollen is not a good candidate for such endeavors.

  3. The size of the nucleosome

    DEFF Research Database (Denmark)

    Bohr, Jakob; Olsen, Kasper

    2011-01-01

    The structural origin of the size of the 11 nm nucleosomal disc is addressed. On the nanometer length-scale the organization of DNA as chromatin in the chromosomes involves a coiling of DNA around the histone core of the nucleosome. We suggest that the size of the nucleosome core particle......-pairs of the linker-DNA is included the estimate of the size of an ideal nucleosome is in close agreement with the experimental numbers. Interestingly, the size of the nucleosome is shown to be a consequence of intrinsic properties of the DNA double helix....

  4. Size-dependent mortality rate profiles.

    Science.gov (United States)

    Roa-Ureta, Ruben H

    2016-08-07

    Knowledge of mortality rates is crucial to the understanding of population dynamics in populations of free-living fish and invertebrates in marine and freshwater environments, and consequently to sustainable resource management. There is a well developed theory of population dynamics based on age distributions that allow direct estimation of mortality rates. However, for most cases the aging of individuals is difficult or age distributions are not available for other reasons. The body size distribution is a widely available alternative although the theory underlying the formation of its shape is more complicated than in the case of age distributions. A solid theory of the time evolution of a population structured by any physiological variable has been developed in 1960s and 1970s by adapting the Hamilton-Jacobi formulation of classical mechanics, and equations to estimate the body size-distributed mortality profile have been derived for simple cases. Here I extend those results with regards to the size-distributed mortality profile to complex cases of non-stationary populations, individuals growing according to a generalised growth model and seasonally patterned recruitment pulses. I apply resulting methods to two cases in the marine environment, a benthic crustacean population that was growing during the period of observation and whose individuals grow with negative acceleration, and a sea urchin coastal population that is undergoing a stable cycle of two equilibrium points in population size whose individuals grow with varying acceleration that switches sign along the size range. The extension is very general and substantially widens the applicability of the theory. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Material grain size and crack size influences on cleavage fracturing.

    Science.gov (United States)

    Armstrong, Ronald W

    2015-03-28

    A review is given of the analogous dependence on reciprocal square root of grain size or crack size of fracture strength measurements reported for steel and other potentially brittle materials. The two dependencies have much in common. For onset of cleavage in steel, attention is focused on relationship of the essentially athermal fracture stress compared with a quite different viscoplastic yield stress behaviour. Both grain-size-dependent stresses are accounted for in terms of dislocation pile-up mechanics. Lowering of the cleavage stress occurs in steel because of carbide cracking. For crack size dependence, there is complication of localized crack tip plasticity in fracture mechanics measurements. Crack-size-dependent conventional and indentation fracture mechanics measurements are described also for results obtained on the diverse materials: polymethylmethacrylate, silicon crystals, alumina polycrystals and WC-Co (cermet) composites. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

  6. Glacial Features (Point) - Quad 168 (EPPING, NH)

    Data.gov (United States)

    University of New Hampshire — The Glacial Features (Point) layer describes point features associated with surficial geology. These glacial features include, but are not limited to, delta forsets,...

  7. A method of size inspection for fruit with machine vision

    Science.gov (United States)

    Rao, Xiuqin; Ying, Yibin

    2005-11-01

    A real time machine vision system for fruit quality inspection was developed, which consists of rollers, an encoder, a lighting chamber, a TMS-7DSP CCD camera (PULNIX Inc.), a computer (P4 1.8G, 128M) and a set of grading controller. An image was binary, and the edge was detected with line-scanned based digit image description, and the MER was applied to detected size of the fruit, but failed. The reason for the result was that the test point with MER was different from which was done with vernier caliper. An improved method was developed, which was called as software vernier caliper. A line between weight O of the fruit and a point A on the edge was drawn, and then the crossed point between line OA and the edge was calculated, which was noted as B, a point C between AB was selected, and the point D on the other side was searched by a way to make CD was vertical to AB, by move the point C between point A and B, A new point D was searched. The maximum length of CD was recorded as an extremum value. By move point A from start to the half point on the edge, a serial of CD was gotten. 80 navel oranges were tested, the maximum error of the diameter was less than 1mm.

  8. Possible refurbishment of Point Lepreau

    International Nuclear Information System (INIS)

    White, R.M.; Groom, S.H.; Thompson, P.D.; Barclay, J.M.; Allen, P.J.

    2001-01-01

    In February 2000, the NB Power Board of Directors approved Phase one of a project to produce a business case including a detailed scope and estimate associated with the possible refurbishment of the Point Lepreau Generating Station (PLGS). The Preliminary plan for refurbishment projects an 18-month outage starting as early as the spring of 2006. If the station were to be refurbished, then it would be run for another 25 to 30 years. The decision on whether or not to refurbish PLGS has not been made and is not expected until the summer of 2002. The results of the first phase of the project will be used to prepare a detailed business case that will be presented to the NB Power board of directors in January of 2002. At that time a decision will be made as to whether to refurbish the unit, or obtain other means of replacing the energy produced by PLGS. The station currently produces about a third of the power generated within the province. If the business case is approved, all-380 Pressure Tubes and Calandria Tubes, along with their related End Fittings and Feeders would be replaced. This material would be stored in new storage vaults to be constructed at the existing on-site Waste Management Facility. Replacement of other station components will be performed as required, as determined from the results of a comprehensive Plant Condition Assessment. The condition assessments build on work done under the Plant Life Management Program. Point Lepreau Generating Station has operated well since start of commercial operation in early 1983. With a lifetime capacity factor of about 84% (up to the end of 2000), it has proven to be an economic and environmentally sound electricity provider. The station has also had a significant positive economic impact in Southern New Brunswick, employing over 600 people. However the Pressure Tubes and Feeders are nearing the point in time in which they will exceed their fitness for service criteria. Although tubes can be replaced on an

  9. Optimal allocation of point-count sampling effort

    Science.gov (United States)

    Barker, Richard J.; Sauer, John R.; Link, William A.

    1993-01-01

    Both unlimited and fixed-radius point counts only provide indices to population size. Because longer count durations lead to counting a higher proportion of individuals at the point, proper design of these surveys must incorporate both count duration and sampling characteristics of population size. Using information about the relationship between proportion of individuals detected at a point and count duration, we present a method of optimizing a point-count survey given a fixed total time for surveying and travelling between count points. The optimization can be based on several quantities that measure precision, accuracy, or power of tests based on counts, including (1) mean-square error of estimated population change; (2) mean-square error of average count; (3) maximum expected total count; or (4) power of a test for differences in average counts. Optimal solutions depend on a function that relates count duration at a point to the proportion of animals detected. We model this function using exponential and Weibull distributions, and use numerical techniques to conduct the optimization. We provide an example of the procedure in which the function is estimated from data of cumulative number of individual birds seen for different count durations for three species of Hawaiian forest birds. In the example, optimal count duration at a point can differ greatly depending on the quantities that are optimized. Optimization of the mean-square error or of tests based on average counts generally requires longer count durations than does estimation of population change. A clear formulation of the goals of the study is a critical step in the optimization process.

  10. The physics of exceptional points

    International Nuclear Information System (INIS)

    Heiss, W D

    2012-01-01

    A short résumé is given about the nature of exceptional points (EPs) followed by discussions about their ubiquitous occurrence in a great variety of physical problems. EPs feature in classical as well as in quantum mechanical problems. They are associated with symmetry breaking for PT-symmetric Hamiltonians, where a great number of experiments has been performed, in particular in optics, and to an increasing extent in atomic and molecular physics. EPs are involved in quantum phase transition and quantum chaos; they produce dramatic effects in multichannel scattering, specific time dependence and more. In nuclear physics, they are associated with instabilities and continuum problems. Being spectral singularities they also affect approximation schemes. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Quantum physics with non-Hermitian operators’. (paper)

  11. Rational points on elliptic curves

    CERN Document Server

    Silverman, Joseph H

    2015-01-01

    The theory of elliptic curves involves a pleasing blend of algebra, geometry, analysis, and number theory. This book stresses this interplay as it develops the basic theory, thereby providing an opportunity for advanced undergraduates to appreciate the unity of modern mathematics. At the same time, every effort has been made to use only methods and results commonly included in the undergraduate curriculum. This accessibility, the informal writing style, and a wealth of exercises make Rational Points on Elliptic Curves an ideal introduction for students at all levels who are interested in learning about Diophantine equations and arithmetic geometry. Most concretely, an elliptic curve is the set of zeroes of a cubic polynomial in two variables. If the polynomial has rational coefficients, then one can ask for a description of those zeroes whose coordinates are either integers or rational numbers. It is this number theoretic question that is the main subject of this book. Topics covered include the geometry and ...

  12. Right sizing prevention. Food portion size effects on children's eating and weight.

    Science.gov (United States)

    Birch, Leann L; Savage, Jennifer S; Fisher, Jennifer Orlet

    2015-05-01

    Experimental findings provide consistent evidence that increasing the portion size of palatable, energy dense entrees relative to an age appropriate reference portion increases children's energy intake of the entree and the meal. Most of these studies have been conducted on preschool aged children between 2 and 6 years of age, in childcare or laboratory settings, using repeated measures designs. In these studies, children's intake is compared across a series of meals, where the size of the entrée portion is varied and other aspects of the meal, including the portion size of other items on the menu, are held constant. This paper provides an overview of what we know from this research, what is not known about the effects of portion size on children's intake and weight status, and points to some of the important unanswered questions and gaps in the literature. Lastly, we discuss how individual characteristics may make someone more or less susceptible to large portions of foods and how the palatability of foods may moderate observed associations among portion size, children's intake, and weight status. Future studies that address the gaps identified in this paper are needed to inform policy and to develop effective and efficient interventions to prevent childhood obesity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  13. Size did not matter: An evolutionary account of the variation in penis size and size anxiety

    Directory of Open Access Journals (Sweden)

    Menelaos Apostolou

    2016-12-01

    Full Text Available The human penis exhibits considerable variation in size, while a substantial proportion of the adult male population experiences size anxiety. This paper employs an evolutionary framework in order to understand this variation, as well as the concern men exhibit about the adequacy of the size of their penis. It is argued that female choice has been one important sexual selection force, responsible for shaping the size of the penis. However, this force has been relatively weak, because women do not consider the size of their partners’ penis to be the most important determinant of their sexual satisfaction. Also, in ancestral human societies, sexual satisfaction was a secondary concern, while women had limited space to exercise mate choice. The mismatch between ancestral and modern conditions, with female choice being stronger in the present than in the past, causes anxiety in men about their ability to satisfy their partners, which is also manifested in their concerns about size.

  14. DETECTION OF SLOPE MOVEMENT BY COMPARING POINT CLOUDS CREATED BY SFM SOFTWARE

    Directory of Open Access Journals (Sweden)

    K. Oda

    2016-06-01

    Full Text Available This paper proposes movement detection method between point clouds created by SFM software, without setting any onsite georeferenced points. SfM software, like Smart3DCaputure, PhotoScan, and Pix4D, are convenient for non-professional operator of photogrammetry, because these systems require simply specification of sequence of photos and output point clouds with colour index which corresponds to the colour of original image pixel where the point is projected. SfM software can execute aerial triangulation and create dense point clouds fully automatically. This is useful when monitoring motion of unstable slopes, or loos rocks in slopes along roads or railroads. Most of existing method, however, uses mesh-based DSM for comparing point clouds before/after movement and it cannot be applied in such cases that part of slopes forms overhangs. And in some cases movement is smaller than precision of ground control points and registering two point clouds with GCP is not appropriate. Change detection method in this paper adopts CCICP (Classification and Combined ICP algorithm for registering point clouds before / after movement. The CCICP algorithm is a type of ICP (Iterative Closest Points which minimizes point-to-plane, and point-to-point distances, simultaneously, and also reject incorrect correspondences based on point classification by PCA (Principle Component Analysis. Precision test shows that CCICP method can register two point clouds up to the 1 pixel size order in original images. Ground control points set in site are useful for initial setting of two point clouds. If there are no GCPs in site of slopes, initial setting is achieved by measuring feature points as ground control points in the point clouds before movement, and creating point clouds after movement with these ground control points. When the motion is rigid transformation, in case that a loose Rock is moving in slope, motion including rotation can be analysed by executing CCICP for a

  15. Point to point multispectral light projection applied to cultural heritage

    Science.gov (United States)

    Vázquez, D.; Alvarez, A.; Canabal, H.; Garcia, A.; Mayorga, S.; Muro, C.; Galan, T.

    2017-09-01

    Use of new of light sources based on LED technology should allow the develop of systems that combine conservation and exhibition requirements and allow to make these art goods available to the next generations according to sustainability principles. The goal of this work is to develop light systems and sources with an optimized spectral distribution for each specific point of the art piece. This optimization process implies to maximize the color fidelity reproduction and the same time to minimize the photochemical damage. Perceived color under these sources will be similar (metameric) to technical requirements given by the restoration team uncharged of the conservation and exhibition of the goods of art. Depending of the fragility of the exposed art objects (i.e. spectral responsivity of the material) the irradiance must be kept under a critical level. Therefore, it is necessary to develop a mathematical model that simulates with enough accuracy both the visual effect of the illumination and the photochemical impact of the radiation. Spectral reflectance of a reference painting The mathematical model is based on a merit function that optimized the individual intensity of the LED-light sources taking into account the damage function of the material and color space coordinates. Moreover the algorithm used weights for damage and color fidelity in order to adapt the model to a specific museal application. In this work we show a sample of this technology applied to a picture of Sorolla (1863-1923) an important Spanish painter title "woman walking at the beach".

  16. Missing portion sizes in FFQ

    DEFF Research Database (Denmark)

    Køster-Rasmussen, Rasmus; Siersma, Volkert Dirk; Halldorson, Thorhallur I.

    2015-01-01

    -nearest neighbours (KNN) were compared with a reference based on self-reported portion sizes (quantified by a photographic food atlas embedded in the FFQ). Setting: The Danish Health Examination Survey 2007–2008. Subjects: The study included 3728 adults with complete portion size data. Results: Compared...

  17. Mapped Plot Patch Size Estimates

    Science.gov (United States)

    Paul C. Van Deusen

    2005-01-01

    This paper demonstrates that the mapped plot design is relatively easy to analyze and describes existing formulas for mean and variance estimators. New methods are developed for using mapped plots to estimate average patch size of condition classes. The patch size estimators require assumptions about the shape of the condition class, limiting their utility. They may...

  18. Food aroma affects bite size

    Directory of Open Access Journals (Sweden)

    de Wijk René A

    2012-03-01

    Full Text Available Abstract Background To evaluate the effect of food aroma on bite size, a semisolid vanilla custard dessert was delivered repeatedly into the mouth of test subjects using a pump while various concentrations of cream aroma were presented retronasally to the nose. Termination of the pump, which determined bite size, was controlled by the subject via a push button. Over 30 trials with 10 subjects, the custard was presented randomly either without an aroma, or with aromas presented below or near the detection threshold. Results Results for ten subjects (four females and six males, aged between 26 and 50 years, indicated that aroma intensity affected the size of the corresponding bite as well as that of subsequent bites. Higher aroma intensities resulted in significantly smaller sizes. Conclusions These results suggest that bite size control during eating is a highly dynamic process affected by the sensations experienced during the current and previous bites.

  19. Concentration and size distribution of particles in abstracted groundwater.

    Science.gov (United States)

    van Beek, C G E M; de Zwart, A H; Balemans, M; Kooiman, J W; van Rosmalen, C; Timmer, H; Vandersluys, J; Stuyfzand, P J

    2010-02-01

    Particle number concentrations have been counted and particle size distributions calculated in groundwater derived by abstraction wells. Both concentration and size distribution are governed by the discharge rate: the higher this rate the higher the concentration and the higher the proportion of larger particles. However, the particle concentration in groundwater derived from abstraction wells, with high groundwater flow velocities, is much lower than in groundwater from monitor wells, with minimal flow velocities. This inconsistency points to exhaustion of the particle supply in the aquifer around wells due to groundwater abstraction for many years. The particle size distribution can be described with the help of a power law or Pareto distribution. Comparing the measured particle size distribution with the Pareto distribution shows that particles with a diameter >7 microm are under-represented. As the particle size distribution is dependent on the flow velocity, so is the value of the "Pareto" slope beta. (c) 2009 Elsevier Ltd. All rights reserved.

  20. It's all change at the visit points

    CERN Multimedia

    Laëtitia Pedroso

    2011-01-01

    58,000 people visited CERN in 2010. In spite of this success, the Organization has plans to review the installations at the various visit points with a view to making the links between them clearer and, above all, making tours of the Laboratory more spectacular.   CERN Control Centre. The permanent exhibition in the Globe of Science and Innovation, the "Universe of Particles", attracts large numbers of visitors. A high-tech venue offering an overview of CERN's research goals, tools and impact throughout the world, the Globe acts as a showcase for the Laboratory. "The Globe is an ideal place to start a tour of CERN. After experiencing a virtual experiment at the heart of the Universe, visitors are keen to find out what's behind it all, to know more about the research we do here at CERN.When it was still possible to see the LHC detectors, visitors were bowled over by their huge size. To continue to surprise them to the same extent, we are planning to reorganise the visit...

  1. Characterizing Sorghum Panicles using 3D Point Clouds

    Science.gov (United States)

    Lonesome, M.; Popescu, S. C.; Horne, D. W.; Pugh, N. A.; Rooney, W.

    2017-12-01

    To address demands of population growth and impacts of global climate change, plant breeders must increase crop yield through genetic improvement. However, plant phenotyping, the characterization of a plant's physical attributes, remains a primary bottleneck in modern crop improvement programs. 3D point clouds generated from terrestrial laser scanning (TLS) and unmanned aerial systems (UAS) based structure from motion (SfM) are a promising data source to increase the efficiency of screening plant material in breeding programs. This study develops and evaluates methods for characterizing sorghum (Sorghum bicolor) panicles (heads) in field plots from both TLS and UAS-based SfM point clouds. The TLS point cloud over experimental sorghum field at Texas A&M farm in Burleston County TX were collected using a FARO Focus X330 3D laser scanner. SfM point cloud was generated from UAS imagery captured using a Phantom 3 Professional UAS at 10m altitude and 85% image overlap. The panicle detection method applies point cloud reflectance, height and point density attributes characteristic of sorghum panicles to detect them and estimate their dimensions (panicle length and width) through image classification and clustering procedures. We compare the derived panicle counts and panicle sizes with field-based and manually digitized measurements in selected plots and study the strengths and limitations of each data source for sorghum panicle characterization.

  2. TOPOLOGY OF RANDOM POINTS YOGESHWARAN. D.

    Indian Academy of Sciences (India)

    Balls grow at unit rate centred at the points of the point cloud/ process. Topological features ( Betti numbers - no. of components, holes etc) are born at some stage and die at later stage. Page 29. PERSISTENT HOMOLOGY / DIAGRAMS. Balls grow at unit rate centred at the points of the point cloud/ process. Topological ...

  3. Some Aspects of Fixed Point Theory!

    Indian Academy of Sciences (India)

    1999-01-22

    Jan 22, 1999 ... game theory and optimization theory. Apart from establishing the existence of a fixed point, it often becomes necessary to prove the uniqueness of the fixed point. Besides, from a computational point of view, an algorithm for calculating the value of the fixed point to a given degree of accuracy is desirable.

  4. Two general fixed point principles and applications

    Directory of Open Access Journals (Sweden)

    Bapurao C. Dhage

    2016-06-01

    Full Text Available We present a couple of general fixed point principles using the constructive approach and derive some interesting well-known fixed point theorems in a metric space and a partially ordered metric space as corollaries. Our general fixed point principles include more than 100 fixed point theorems in different metric spaces as special cases.

  5. 18 CFR 157.211 - Delivery points.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Delivery points. 157... for Certain Transactions and Abandonment § 157.211 Delivery points. (a) Construction and operation—(1... delivery point, excluding the construction of certain delivery points subject to the prior notice...

  6. Professional SharePoint 2010 Development

    CERN Document Server

    Rizzo, Tom; Fried, Jeff

    2010-01-01

    Learn to leverage the features of the newest version of SharePoint, in this update to the bestseller. More than simply a portal, SharePoint is Microsoft's popular content management solution for building intranets and Web sites or hosting wikis and blogs. Offering broad coverage on all aspects of development for the SharePoint platform, this comprehensive book shows you exactly what SharePoint does, how to build solutions, and what features are accessible within SharePoint. Written by one of the most recognized names in SharePoint development, Professional SharePoint 2010 Development offers an

  7. Container size influences snack food intake independently of portion size.

    Science.gov (United States)

    Marchiori, David; Corneille, Olivier; Klein, Olivier

    2012-06-01

    While larger containers have been found to increase food intake, it is unclear whether this effect is driven by container size, portion size, or their combination, as these variables are usually confounded. The study was advertised as examining the effects of snack food consumption on information processing and participants were served M&M's for free consumption in individual cubicles while watching a TV show. Participants were served (1) a medium portion of M&M's in a small (n=30) or (2) in a large container (n=29), or (3) a large portion in a large container (n=29). The larger container increased intake by 129% (199 kcal) despite holding portion size constant, while controlling for different confounding variables. This research suggests that larger containers stimulate food intake over and above their impact on portion size. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Laser desorption mass spectrometry for point mutation detection

    Energy Technology Data Exchange (ETDEWEB)

    Taranenko, N.I.; Chung, C.N.; Zhu, Y.F. [Oak Ridge National Lab., TN (United States)] [and others

    1996-10-01

    A point mutation can be associated with the pathogenesis of inherited or acquired diseases. Laser desorption mass spectrometry coupled with allele specific polymerase chain reaction (PCR) was first used for point mutation detection. G551D is one of several mutations of the cystic fibrosis transmembrane conductance regulator (CFTR) gene present in 1-3% of the mutant CFTR alleles in most European populations. In this work, two different approaches were pursued to detect G551D point mutation in the cystic fibrosis gene. The strategy is to amplify the desired region of DNA template by PCR using two primers that overlap one base at the site of the point mutation and which vary in size. If the two primers based on the normal sequence match the target DNA sequence, a normal PCR product will be produced. However, if the alternately sized primers that match the mutant sequence recognize the target DNA, an abnormal PCR product will be produced. Thus, the mass spectrometer can be used to identify patients that are homozygous normal, heterozygous for a mutation or homozygous abnormal at a mutation site. Another approach to identify similar mutations is the use of sequence specific restriction enzymes which respond to changes in the DNA sequence. Mass spectrometry is used to detect the length of the restriction fragments generated by digestion of a PCR generated target fragment. 21 refs., 10 figs., 2 tabs.

  9. Laser desorption mass spectrometry for point mutation detection

    Energy Technology Data Exchange (ETDEWEB)

    Taranenko, N.I.; Chung, C.N.; Zhu, Y.F. [Oak Ridge National Lab., TN (United States)] [and others

    1996-12-31

    A point mutation can be associated with the pathogenesis of inherited or acquired diseases. Laser desorption mass spectrometry coupled with allele specific polymerase chain reaction (PCR) was first used for point mutation detection. G551D is one of several mutations of the cystic fibrosis transmembrane conductance regulator (CFTR) gene present in 1-3% of the mutant CFTR alleles in most European populations. In this work, two different approaches were pursued to detect G551D point mutation in the cystic fibrosis gene. The strategy is to amplify the desired region of DNA template by PCR using two primers that overlap one base at the site of the point mutation and which vary in size. If the two primers based on the normal sequence match the target DNA sequence, a normal PCR product will be produced. However, if the alternately sized primers that match the mutant sequence recognize the target DNA, an abnormal PCR product will be produced. Thus, the mass spectrometer can be used to identify patients that are homozygous normal, heterozygous for a mutation or homozygous abnormal at a mutation site. Another approach to identify similar mutations is the use of sequence specific restriction enzymes which respond to changes in the DNA sequence. Mass spectrometry is used to detect the length of the restriction fragments by digestion of a PCR generated target fragment. 21 refs., 10 figs., 2 tabs.

  10. Performance testing of 3D point cloud software

    Science.gov (United States)

    Varela-González, M.; González-Jorge, H.; Riveiro, B.; Arias, P.

    2013-10-01

    LiDAR systems are being used widely in recent years for many applications in the engineering field: civil engineering, cultural heritage, mining, industry and environmental engineering. One of the most important limitations of this technology is the large computational requirements involved in data processing, especially for large mobile LiDAR datasets. Several software solutions for data managing are available in the market, including open source suites, however, users often unknown methodologies to verify their performance properly. In this work a methodology for LiDAR software performance testing is presented and four different suites are studied: QT Modeler, VR Mesh, AutoCAD 3D Civil and the Point Cloud Library running in software developed at the University of Vigo (SITEGI). The software based on the Point Cloud Library shows better results in the loading time of the point clouds and CPU usage. However, it is not as strong as commercial suites in working set and commit size tests.

  11. Embrittlement and decrease of apparent strength in large-sized ...

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    adequate account the effects of microstructural disorder and seems to be valid in the whole size range, .... It is important to point out that uncertainties in the determination of the bending strength affect both allowable ... On the basis of this theory and of early experimental results, an empirical expression was proposed by ...

  12. Confidence Intervals for Effect Sizes: Applying Bootstrap Resampling

    Science.gov (United States)

    Banjanovic, Erin S.; Osborne, Jason W.

    2016-01-01

    Confidence intervals for effect sizes (CIES) provide readers with an estimate of the strength of a reported statistic as well as the relative precision of the point estimate. These statistics offer more information and context than null hypothesis statistic testing. Although confidence intervals have been recommended by scholars for many years,…

  13. The island rule of body size demonstrated on individual hosts

    NARCIS (Netherlands)

    Molleman, Freerk; Depoilly, Alexandre; Vernon, Philippe; Müller, Jörg; Bailey, Richard; Jarzabek-Müller, Andrea; Prinzing, Andreas

    2016-01-01

    Aim: Under spatial isolation on oceanic islands, species tend to show extreme body sizes. From the point of view of many colonizers, individual hosts surrounded by phylogenetically distant neighbours are phylogenetically isolated. This study addresses for the first time how phylogenetic isolation

  14. Qualitative and quantitative assessment of step size adaptation rules

    DEFF Research Database (Denmark)

    Krause, Oswin; Glasmachers, Tobias; Igel, Christian

    2017-01-01

    We present a comparison of step size adaptation methods for evolution strategies, covering recent developments in the field. Following recent work by Hansen et al. we formulate a concise list of performance criteria: a) fast convergence of the mean, b) near-optimal fixed point of the normalized...

  15. Light Stops at Exceptional Points

    Science.gov (United States)

    Goldzak, Tamar; Mailybaev, Alexei A.; Moiseyev, Nimrod

    2018-01-01

    Almost twenty years ago, light was slowed down to less than 10-7 of its vacuum speed in a cloud of ultracold atoms of sodium. Upon a sudden turn-off of the coupling laser, a slow light pulse can be imprinted on cold atoms such that it can be read out and converted into a photon again. In this process, the light is stopped by absorbing it and storing its shape within the atomic ensemble. Alternatively, the light can be stopped at the band edge in photonic-crystal waveguides, where the group speed vanishes. Here, we extend the phenomenon of stopped light to the new field of parity-time (P T ) symmetric systems. We show that zero group speed in P T symmetric optical waveguides can be achieved if the system is prepared at an exceptional point, where two optical modes coalesce. This effect can be tuned for optical pulses in a wide range of frequencies and bandwidths, as we demonstrate in a system of coupled waveguides with gain and loss.

  16. Decision Point 1 Topical Report

    Energy Technology Data Exchange (ETDEWEB)

    Yablonsky, Al; Barsoumian, Shant; Legere, David

    2013-05-01

    This Topical Report addresses accomplishments achieved during Phase 2a of the SkyMine® Carbon Mineralization Pilot Project. The primary objectives of this project are to design, construct, and operate a system to capture CO2 from a slipstream of flue gas from a commercial coal-fired cement kiln, convert that CO2 to products having commercial value (i.e., beneficial use), show the economic viability of the CO2 capture and conversion process, and thereby advance the technology to the point of readiness for commercial scale demonstration and proliferation. The overall process is carbon negative, resulting in mineralization of CO2 that would otherwise be released into the atmosphere. The project will also substantiate market opportunities for the technology by sales of chemicals into existing markets, and identify opportunities to improve technology performance and reduce costs at the commercial scale. The project is being conducted in two phases. The primary objectives of Phase 1 were to elaborate proven SkyMine® process chemistry to commercial pilot-scale operation and complete the preliminary design for the pilot plant to be built and operated in Phase 2, complete a NEPA evaluation, and develop a comprehensive carbon life cycle analysis. The objective of the current Phase (2a) is to complete the detailed design of the pilot plant to be built in Phase 2b.

  17. Turkey Point tritium. Progress report

    International Nuclear Information System (INIS)

    Ostlund, H.G.; Dorsey, H.G.

    1976-01-01

    In 1972-73 the Florida Power and Light Company (FPL) began operation of two nuclear reactors at Turkey Point on lower Biscayne Bay. One radioactive by-product resulting from the operation of the nuclear reactors, tritium, provides a unique opportunity to study transport and exchange processes on a local scale. Since the isotope in the form of water is not removed from the liquid effluent, it is discharged to the cooling canal system. By studying its residence time in the canal and the pathways by which it leaves the canals, knowledge of evaporative process, groundwater movement, and bay exchange with the ocean can be obtained. Preliminary results obtained from measurement of tritium levels, both in the canal system and in the surrounding environment are discussed. Waters in lower Biscayne Bay and Card and Barnes Sounds receive only a small portion of the total tritium produced by the nuclear plant. The dominating tritium loss most likely is through evaporation from the canals. The capability of measuring extremely low HTO levels allows the determination of the evaporation rate experimentally by measuring the tritium levels of air after having passed over the canals

  18. Point-of-Care Testing.

    Science.gov (United States)

    Goble, Joseph A; Rocafort, Patrick T

    2017-04-01

    This article provides an overview of the current use of point-of-care testing (POCT) and its utility for patients' self-management of chronic disease states. Pharmacists utilize POCT to provide rapid laboratory diagnostic results as a monitoring tool in the management of their patients and in order to improve medication outcomes. Considerations for the transition to use of POCT in the home to further improve disease management and improve health care cost-effectiveness are discussed. Devices available for home use include those suitable for management of diabetes mellitus, hypertension, congestive heart failure, and anticoagulation. Many of these devices include software capabilities enabling patients to share important health information with health care providers using a computer. Limitations and challenges surrounding implementation of home POCT for patients include reliability of instrumentation, ability to coordinate data collection, necessary training requirements, and cost-effectiveness. Looking forward, the successful integration of POCT into the homes of patients is contingent on a concerted effort made by all members of the health care team.

  19. A New Look at Trigger Point Injections

    OpenAIRE

    Wong, Clara S. M.; Wong, Steven H. S.

    2012-01-01

    Trigger point injections are commonly practised pain interventional techniques. However, there is still lack of objective diagnostic criteria for trigger points. The mechanisms of action of trigger point injection remain obscure and its efficacy remains heterogeneous. The advent of ultrasound technology in the noninvasive real-time imaging of soft tissues sheds new light on visualization of trigger points, explaining the effect of trigger point injection by blockade of peripheral nerves, and ...

  20. A new look at trigger point injections.

    Science.gov (United States)

    Wong, Clara S M; Wong, Steven H S

    2012-01-01

    Trigger point injections are commonly practised pain interventional techniques. However, there is still lack of objective diagnostic criteria for trigger points. The mechanisms of action of trigger point injection remain obscure and its efficacy remains heterogeneous. The advent of ultrasound technology in the noninvasive real-time imaging of soft tissues sheds new light on visualization of trigger points, explaining the effect of trigger point injection by blockade of peripheral nerves, and minimizing the complications of blind injection.

  1. 49 CFR 236.327 - Switch, movable-point frog or split-point derail.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Switch, movable-point frog or split-point derail..., AND APPLIANCES Interlocking Rules and Instructions § 236.327 Switch, movable-point frog or split-point derail. Switch, movable-point frog, or split-point derail equipped with lock rod shall be maintained so...

  2. An improved maximum power point tracking method for a photovoltaic system

    Science.gov (United States)

    Ouoba, David; Fakkar, Abderrahim; El Kouari, Youssef; Dkhichi, Fayrouz; Oukarfi, Benyounes

    2016-06-01

    In this paper, an improved auto-scaling variable step-size Maximum Power Point Tracking (MPPT) method for photovoltaic (PV) system was proposed. To achieve simultaneously a fast dynamic response and stable steady-state power, a first improvement was made on the step-size scaling function of the duty cycle that controls the converter. An algorithm was secondly proposed to address wrong decision that may be made at an abrupt change of the irradiation. The proposed auto-scaling variable step-size approach was compared to some various other approaches from the literature such as: classical fixed step-size, variable step-size and a recent auto-scaling variable step-size maximum power point tracking approaches. The simulation results obtained by MATLAB/SIMULINK were given and discussed for validation.

  3. Portion distortion: typical portion sizes selected by young adults.

    Science.gov (United States)

    Schwartz, Jaime; Byrd-Bredbenner, Carol

    2006-09-01

    The incidence of obesity has increased in parallel with increasing portion sizes of individually packaged and ready-to-eat prepared foods as well as foods served at restaurants. Portion distortion (perceiving large portion sizes as appropriate amounts to eat at a single eating occasion) may contribute to increasing energy intakes and expanding waistlines. The purpose of this study was to determine typical portion sizes that young adults select, how typical portion sizes compare with reference portion sizes (based in this study on the Nutrition Labeling and Education Act's quantities of food customarily eaten per eating occasion), and whether the size of typical portions has changed over time. Young adults (n=177, 75% female, age range 16 to 26 years) at a major northeastern university. Participants served themselves typical portion sizes of eight foods at breakfast (n=63) or six foods at lunch or dinner (n=62, n=52, respectively). Typical portion-size selections were unobtrusively weighed. A unit score was calculated by awarding 1 point for each food with a typical portion size that was within 25% larger or smaller than the reference portion; larger or smaller portions were given 0 points. Thus, each participant's unit score could range from 0 to 8 at breakfast or 0 to 6 at lunch and dinner. Analysis of variance or t tests were used to determine whether typical and reference portion sizes differed, and whether typical portion sizes changed over time. Mean unit scores (+/-standard deviation) were 3.63+/-1.27 and 1.89+/-1.14, for breakfast and lunch/dinner, respectively, indicating little agreement between typical and reference portion sizes. Typical portions sizes in this study tended to be significantly different from those selected by young adults in a similar study conducted 2 decades ago. Portion distortion seems to affect the portion sizes selected by young adults for some foods. This phenomenon has the potential to hinder weight loss, weight maintenance, and

  4. Development and characterization of microsatellite markers in the Point Arena mountain beaver Aplodontia rufa nigra

    Science.gov (United States)

    Kristine L. Pilgrim; William J. Zielinski; Mary J. Mazurek; Frederick V. Schlexer; Michael K. Schwartz

    2006-01-01

    The Point Arena mountain beaver (Aplodontia rufa nigra) is an endangered subspecies. Efforts to recover this sub-species will be aided by advances in molecular genetics, specifically the ability to estimate population size using noninvasive genetic sampling. Here we report on the development of nine polymorphic loci for the Point Arena mountain...

  5. On Out of Plane Equilibrium Points in Photo-Gravitational Restricted ...

    Indian Academy of Sciences (India)

    Abstract. We have investigated the out of plane equilibrium points of a passive micron size particle and their stability in the field of radiating binary stellar systems Krüger-60, RW-Monocerotis within the framework of photo-gravitational circular restricted three-body problem. We find that the out of plane equilibrium points (Li,i ...

  6. Analog design centering and sizing

    CERN Document Server

    Graeb, Helmut E

    2007-01-01

    Here is a compendium of fundamental problem formulations of analog design centering and sizing. It provides a differentiated knowledge about the many tasks of analog design centering and sizing. In particular, coverage formulates the worst-case problem. The book stands at the interface between process technology and design technology, detailing how the two are required to reach a solution. It presents a mathematically founded description based on numerical optimization and statistics. This volume will enable analog and mixed-signal designers to assess CAD solution methods that are presented to them as well as help developers of analog CAD tools to formulate and develop solution approaches for analog design centering and sizing.

  7. Sibship Size and Educational Attainment

    DEFF Research Database (Denmark)

    Jæger, Mads Meier

    2009-01-01

    Studies on family background often explain the negative effect of sibship size on educational attainment by one of two theories: the Confluence Model (CM) or the Resource Dilution Hypothesis (RDH). However, as both theories - for substantively different reasons - predict that sibship size should...... to distinguish the two theories and to identify a unique RDH effect on educational attainment. Using sibling data from the Wisconsin Longitudinal Study (WLS) and a random effect Instrumental Variable model I find that, in addition to a negative effect on cognitive ability, sibship size also has a strong negative...

  8. Crystallite sizes of porites species

    International Nuclear Information System (INIS)

    Fadhlia Zafarina Zakaria; Julynnie Wajir; Fauziah Abdul Aziz

    2009-01-01

    This study was designed to investigate the crystallite sizes of Porites species. A set of 9 Porites skeletons i.e. Porites australiensis, Porites cylindrica, Porites lutea, Porites lichen, Porites digitata, Porites nigrescens, Porites rus, Porites annae and Porites sp. were studied by using X-Ray Diffraction method. The values of FWHM and theta (θ) are used in Scherrer equation to determine the crystallite sizes of all Porites samples. It was found that the crystallite sizes were in the range of 1000.78 - 1706.04 Angstrom. (author)

  9. Predicting sample size required for classification performance

    Directory of Open Access Journals (Sweden)

    Figueroa Rosa L

    2012-02-01

    Full Text Available Abstract Background Supervised learning methods need annotated data in order to generate efficient models. Annotated data, however, is a relatively scarce resource and can be expensive to obtain. For both passive and active learning methods, there is a need to estimate the size of the annotated sample required to reach a performance target. Methods We designed and implemented a method that fits an inverse power law model to points of a given learning curve created using a small annotated training set. Fitting is carried out using nonlinear weighted least squares optimization. The fitted model is then used to predict the classifier's performance and confidence interval for larger sample sizes. For evaluation, the nonlinear weighted curve fitting method was applied to a set of learning curves generated using clinical text and waveform classification tasks with active and passive sampling methods, and predictions were validated using standard goodness of fit measures. As control we used an un-weighted fitting method. Results A total of 568 models were fitted and the model predictions were compared with the observed performances. Depending on the data set and sampling method, it took between 80 to 560 annotated samples to achieve mean average and root mean squared error below 0.01. Results also show that our weighted fitting method outperformed the baseline un-weighted method (p Conclusions This paper describes a simple and effective sample size prediction algorithm that conducts weighted fitting of learning curves. The algorithm outperformed an un-weighted algorithm described in previous literature. It can help researchers determine annotation sample size for supervised machine learning.

  10. [Discussing the relationship among theashipoint, tender point and myofascial trigger point].

    Science.gov (United States)

    Chen, Decheng; Yang, Guanhu; Wang, Fuchun; Qi, Wei

    2017-02-12

    The conception and the history of ashi point, tender point and myofascial trigger point are described in the paper. All of three kinds of point are the reaction of musculoskeletal pain and visceral diseases. Theoretically, ashi point originates from the theory of muscle region of meridian, tender point from the theory of soft tissue and muscles and myofascial trigger point from the theory of muscular fasciae. Anatomically, ashi point is localized in the muscle region of meridian, on the boundary between muscles, tender point is on the muscular attachment to skeleton (the starting and ending points) and myofascial trigger point is on the motor point of neuromuscles. Pathologically, ashi point reflects the disorders of soft tissue and internal organ, tender point reflects the disorders of soft tissue and myofascial trigger point reflects the disorders of soft tissue and few disorders of internal organ. To identify the relationship among them is very significant in the target treatment with acupuncture.

  11. Jurisdiction Size and Local Democracy

    DEFF Research Database (Denmark)

    Lassen, David Dreyer; Serritslew, Søren

    2011-01-01

    Optimal jurisdiction size is a cornerstone of government design. A strong tradition in political thought argues that democracy thrives in smaller jurisdictions, but existing studies of the effects of jurisdiction size, mostly cross-sectional in nature, yield ambiguous results due to sorting effects...... and problems of endogeneity. We focus on internal political efficacy, a psychological condition that many see as necessary for high-quality participatory democracy. We identify a quasiexperiment, a large-scale municipal reform in Denmark, which allows us to estimate a causal effect of jurisdiction size...... on internal political efficacy. The reform, affecting some municipalities, but not all, was implemented by the central government, and resulted in exogenous, and substantial, changes in municipal population size. Based on survey data collected before and after the reform, we find, using various difference...

  12. Analysis of glass fibre sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2014-01-01

    surfaces are called sizing. The sizing influences the properties of the interface between fibres and a matrix, and subsequently affects mechanical properties of composites. In this work the sizing of commercially available glass fibres was analysed so as to study the composition and chemical structures......Glass fibre reinforced polymer composites are widely used for industrial and engineering applications which include construction, aerospace, automotive and wind energy industry. During the manufacturing glass fibres, they are surface-treated with an aqueous solution. This process and the treated....... Soxhlet extraction was used to extract components of the sizing from the glass fibres. The glass fibres, their extracts and coated glass plates were analysed by Thermo-Gravimetric Analysis combined with a mass spectrometer (TGA-MS), and Attenuated Total Reflectance Fourier Transform Infrared (ATR...

  13. Sample size determination and power

    CERN Document Server

    Ryan, Thomas P, Jr

    2013-01-01

    THOMAS P. RYAN, PhD, teaches online advanced statistics courses for Northwestern University and The Institute for Statistics Education in sample size determination, design of experiments, engineering statistics, and regression analysis.

  14. Method for sizing hollow microspheres

    Science.gov (United States)

    Farnum, E.H.; Fries, R.J.

    1975-10-29

    Hollow Microspheres may be effectively sized by placing them beneath a screen stack completely immersed in an ultrasonic bath containing a liquid having a density at which the microspheres float and ultrasonically agitating the bath.

  15. Aerosol Size Distributions In Auckland.

    Czech Academy of Sciences Publication Activity Database

    Coulson, G.; Olivares, G.; Talbot, Nicholas

    2016-01-01

    Roč. 50, č. 1 (2016), s. 23-28 E-ISSN 1836-5876 Institutional support: RVO:67985858 Keywords : aerosol size distribution * particle number concentration * roadside Subject RIV: CF - Physical ; Theoretical Chemistry

  16. Size scaling of static friction.

    Science.gov (United States)

    Braun, O M; Manini, Nicola; Tosatti, Erio

    2013-02-22

    Sliding friction across a thin soft lubricant film typically occurs by stick slip, the lubricant fully solidifying at stick, yielding and flowing at slip. The static friction force per unit area preceding slip is known from molecular dynamics (MD) simulations to decrease with increasing contact area. That makes the large-size fate of stick slip unclear and unknown; its possible vanishing is important as it would herald smooth sliding with a dramatic drop of kinetic friction at large size. Here we formulate a scaling law of the static friction force, which for a soft lubricant is predicted to decrease as f(m)+Δf/A(γ) for increasing contact area A, with γ>0. Our main finding is that the value of f(m), controlling the survival of stick slip at large size, can be evaluated by simulations of comparably small size. MD simulations of soft lubricant sliding are presented, which verify this theory.

  17. Prognostic value of nucleolar size and size pleomorphism in choroidal melanomas

    DEFF Research Database (Denmark)

    Sørensen, Flemming Brandt; Gamel, J W; Jensen, O A

    1993-01-01

    treated solely by enucleation of the melanoma-bearing eye in the period from 1977 to 1979. The independent prognostic value of the quantitative histopathological variables was evaluated using multivariate Cox analysis. Apart from patient data and information about tumor extent, histological type......Morphometric estimates of nucleolar size have been shown to possess a high prognostic value in patients with uveal melanomas. The authors investigated various quantitative estimators of the mean size and pleomorphism of nucleoli in choroidal melanomas from a consecutive series of 95 Danish patients...... of melanoma, and largest macroscopic tumor dimension (LTD), the following histomorphometric estimates were obtained: mean diameter of the 10 largest nucleoli (MLN), point-sampled mean nucleolar profile area (nucleolar ao) and the associated standard deviation of nucleolar ao, the volume-weighted mean...

  18. Prognostic value of nucleolar size and size pleomorphism in choroidal melanomas

    DEFF Research Database (Denmark)

    Sørensen, Flemming Brandt; Gamel, J W; Jensen, O A

    1993-01-01

    Morphometric estimates of nucleolar size have been shown to possess a high prognostic value in patients with uveal melanomas. The authors investigated various quantitative estimators of the mean size and pleomorphism of nucleoli in choroidal melanomas from a consecutive series of 95 Danish patients...... of melanoma, and largest macroscopic tumor dimension (LTD), the following histomorphometric estimates were obtained: mean diameter of the 10 largest nucleoli (MLN), point-sampled mean nucleolar profile area (nucleolar ao) and the associated standard deviation of nucleolar ao, the volume-weighted mean...... nucleolar volume (nucleolar vv), and associated variance and relative variance of nucleolar volume (nucleolar Varv(v) and nucleolar CVv(v), respectively). The intra-observer reproducibility of estimates of nucleolar vv was tested in 20 cases and found acceptable (r = 0.84, 2p = 3.6.10(-6)). Correlation...

  19. Comparison of Dose When Prescribed to Point A and Point H for Brachytherapy in Cervical Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Gang, Ji Hyeong; Gim, Il Hwan; Hwang, Seon Boong; Kim, Woong; Im, Hyeong Seo; Gang, Jin Mook; Gim, Gi Hwan; Lee, Ah Ram [Dept. of Radiation Oncology, Korea Institute of Radiological and Medical Sciences, Seou (Korea, Republic of)

    2012-09-15

    The purpose of this study is to compare plans prescribed to point A with these prescribed to point H recommended by ABS (American Brachytherapy Society) in high dose rate intracavitary brachytherapy for cervical carcinoma. This study selected 103 patients who received HDR (High Dose Rate) brachytherapy using tandem and ovoids from March 2010 to January 2012. Point A, bladder point, and rectal point conform with Manchester System. Point H conforms with ABS recommendation. Also Sigmoid colon point, and vagina point were established arbitrarily. We examined distance between point A and point H. The percent dose at point A was calculated when 100% dose was prescribed to point H. Additionally, the percent dose at each reference points when dose is prescribed to point H and point A were calculated. The relative dose at point A was lower when point H was located inferior to point A. The relative doses at bladder, rectal, sigmoid colon, and vagina points were higher when point H was located superior to point A, and lower when point H was located inferior to point A. This study found out that as point H got located much superior to point A, the absorbed dose of surrounding normal organs became higher, and as point H got located much inferior to point A, the absorbed dose of surrounding normal organs became lower. This differences dose not seem to affect the treatment. However, we suggest this new point is worth being considered for the treatment of HDR if dose distribution and absorbed dose at normal organs have large differences between prescribed to point A and H.

  20. Professional SharePoint 2010 Development

    CERN Document Server

    Rizzo, Tom; Fried, Jeff; Swider, Paul J; Hillier, Scot; Schaefer, Kenneth

    2012-01-01

    Updated guidance on how to take advantage of the newest features of SharePoint programmability More than simply a portal, SharePoint is Microsoft's popular content management solution for building intranets and websites or hosting wikis and blogs. Offering broad coverage on all aspects of development for the SharePoint platform, this comprehensive book shows you exactly what SharePoint does, how to build solutions, and what features are accessible within SharePoint. Written by a team of SharePoint experts, this new edition offers an extensive selection of field-tested best practices that shows

  1. SharePoint 2010 Field Guide

    CERN Document Server

    Mann, Steven; Gazmuri, Pablo; Caravajal, Steve; Wheeler, Christina

    2012-01-01

    Hands-on solutions for common SharePoint 2010 challenges Aimed at the more than 100 million licensed SharePoint 2010 users, this indispensable field guide addresses an abundance of common SharePoint 2010 problems and offers proven solutions. A team of authors encourages you to customize SharePoint beyond the out-of-the-box functionality so that you can build more complex solutions to these challenges. You?ll discover intricate details and specific full-scale solutions that you can then implement to your own SharePoint 2010 solutions.Tackles a variety of SharePoint 2010 problems ranging from si

  2. Professional SharePoint 2010 Administration

    CERN Document Server

    Klindt, Todd; Caravajal, Steve

    2010-01-01

    Thorough coverage of the improvements and changes to SharePoint 2010. SharePoint 2010 boasts a variety of incredible new features that will challenge even the most experienced administrator who is upgrading from SharePoint 2007. Written by a team of SharePoint experts, this book places a takes aim at showing you how to make these new features work right for you. Offering an in-depth look at SharePoint 2010, the authors focus on how SharePoint functionality has changed from its earliest version to its newest, and they provide you with detailed coverage of all the new features and capabilities.:

  3. Professional SharePoint 2013 administration

    CERN Document Server

    Young, Shane; Klindt, Todd

    2013-01-01

    SharePoint admin author gurus return to prepare you for working with the new features of SharePoint 2013! The new iteration of SharePoint boasts exciting new features. However, any new version also comes with its fair share of challenges and that's where this book comes in. The team of SharePoint admin gurus returns to presents a fully updated resource that prepares you for making all the new SharePoint 2013 features work right. They cover all of the administration components of SharePoint 2013 in detail, and present a clear understanding of how they affect the role of the adminis

  4. SharePoint 2010 For Dummies

    CERN Document Server

    Williams, Vanessa L

    2012-01-01

    Here's the bestselling guide on SharePoint 2010, updated to cover Office 365 SharePoint Portal Server is an essential part of the enterprise infrastructure for many businesses. The Office 365 version includes significantly enhanced cloud capabilities. This second edition of the bestselling guide to SharePoint covers getting a SharePoint site up and running, branded, populated with content, and more. It explains ongoing site management and offers plenty of advice for administrators who want to leverage SharePoint and Office 365 in various ways.Many businesses today rely on SharePoint Portal Ser

  5. Fluorescence correlation spectroscopy: an efficient tool for measuring size, size-distribution and polydispersity of microemulsion droplets in solution.

    Science.gov (United States)

    Pal, Nibedita; Dev Verma, Sachin; Singh, Moirangthem Kiran; Sen, Sobhan

    2011-10-15

    Fluorescence correlation spectroscopy (FCS) is an ideal tool for measuring molecular diffusion and size under extremely dilute conditions. However, the power of FCS has not been utilized to its best to measure diffusion and size parameters of complex chemical systems. Here, we apply FCS to measure the size, and, most importantly, the size distribution and polydispersity of a supramolecular nanostructure (i.e., microemulsion droplets, MEDs) in dilute solution. It is shown how the refractive index mismatch of a solution can be corrected in FCS to obtain accurate size parameters of particles, bypassing the optical matching problem of light scattering techniques that are used often for particle-size measurements. We studied the MEDs of 13 different W(0) values from 2 to 50 prepared in a ternary mixture of water, sodium bis(2-ethylhexyl) sulfosuccinate (AOT), and isooctane, with sulforhodamine-B as a fluorescent marker. We find that, near the optical matching point of MEDs, the dynamic light scattering (DLS) measurements underestimate the droplet sizes while FCS estimates the accurate ones. A Gaussian distribution model (GDM) and a maximum-entropy-based FCS data fitting model (MEMFCS) are used to analyze the fluorescence correlation curves that unfold Gaussian-type size distributions of MEDs in solution. We find the droplet size varies linearly with W(0) up to ~20, but beyond this W(0) value, the size variation deviates from this linearity. To explain nonlinear variation of droplet size for W(0) values beyond ~20, we invoke a model (the coated-droplet model) that incorporates the size polydispersity of the droplets. © 2011 American Chemical Society

  6. Induced Temporal Signatures for Point-Source Detection

    International Nuclear Information System (INIS)

    Stephens, Daniel L.; Runkle, Robert C.; Carlson, Deborah K.; Peurrung, Anthony J.; Seifert, Allen; Wyatt, Cory R.

    2005-01-01

    Detection of radioactive point-sized sources is inherently divided into two regimes encompassing stationary and moving detectors. The two cases differ in their treatment of background radiation and its influence on detection sensitivity. In the stationary detector case the statistical fluctuation of the background determines the minimum detectable quantity. In the moving detector case the detector may be subjected to widely and irregularly varying background radiation, as a result of geographical and environmental variation. This significant systematic variation, in conjunction with the statistical variation of the background, requires a conservative threshold to be selected to yield the same false-positive rate as the stationary detection case. This results in lost detection sensitivity for real sources. This work focuses on a simple and practical modification of the detector geometry that increase point-source recognition via a distinctive temporal signature. A key part of this effort is the integrated development of both detector geometries that induce a highly distinctive signature for point sources and the development of statistical algorithms able to optimize detection of this signature amidst varying background. The identification of temporal signatures for point sources has been demonstrated and compared with the canonical method showing good results. This work demonstrates that temporal signatures are efficient at increasing point-source discrimination in a moving detector system

  7. Probing wavenumbers of current-induced excitations in point-contact experiments

    Directory of Open Access Journals (Sweden)

    Z Wei

    2010-06-01

    Full Text Available Z Wei, M TsoiDepartment of Physics, Center for Nano and Molecular Science and Technology, and Texas Materials Institute, The University of Texas at Austin, Austin, TX, USAAbstract: We demonstrate how a mechanical point-contact technique can provide information on the wavenumber of spin waves excited by high-density electrical current in magnetic multilayers. By varying the size of point-contacts, we have been able to control the size of the excitation volume and therefore the wavelength of current-induced spin waves. This leads to a technique with in situ sensitivity to wavenumbers of current-induced excitations. Our detailed size-dependent measurements support the prediction that the excited wavelength is determined by the contact size.Keywords: spin transfer torque, giant magnetoresistance, spin waves, point contact

  8. State Wildlife Management Area Public Facilities - points

    Data.gov (United States)

    Minnesota Department of Natural Resources — This point theme contains facilities and features for WMAs that are best represented as points. WMAs are part of the Minnesota state recreation system created to...

  9. Implementation of Steiner point of fuzzy set.

    Science.gov (United States)

    Liang, Jiuzhen; Wang, Dejiang

    2014-01-01

    This paper deals with the implementation of Steiner point of fuzzy set. Some definitions and properties of Steiner point are investigated and extended to fuzzy set. This paper focuses on establishing efficient methods to compute Steiner point of fuzzy set. Two strategies of computing Steiner point of fuzzy set are proposed. One is called linear combination of Steiner points computed by a series of crisp α-cut sets of the fuzzy set. The other is an approximate method, which is trying to find the optimal α-cut set approaching the fuzzy set. Stability analysis of Steiner point of fuzzy set is also studied. Some experiments on image processing are given, in which the two methods are applied for implementing Steiner point of fuzzy image, and both strategies show their own advantages in computing Steiner point of fuzzy set.

  10. Testing Local Independence between Two Point Processes

    DEFF Research Database (Denmark)

    Allard, Denis; Brix, Anders; Chadæuf, Joël

    2001-01-01

    Independence test, Inhomogeneous point processes, Local test, Monte Carlo, Nonstationary, Rotations, Spatial pattern, Tiger bush......Independence test, Inhomogeneous point processes, Local test, Monte Carlo, Nonstationary, Rotations, Spatial pattern, Tiger bush...

  11. The Science of Drug Use: Discussion Points

    Science.gov (United States)

    ... The Science of Drug Use: Discussion Points The Science of Drug Use: Discussion Points Email Facebook Twitter ... was last updated February 2017 Related Topics Addiction Science Adolescent Brain Comorbidity College-Age & Young Adults Criminal ...

  12. Very smooth points of spaces of operators

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Our notation and terminology is standard and can be found in [HWW]. For a Banach space X by ∂eX1 we denote the set of extreme points. 2. Very smooth points. Let M ⊂ X be a closed subspace. It was observed in [MR] that if x ∈ M is a smooth point of X then it is a smooth point of M. It is easy to see that if every continuous.

  13. Preventing Point-of-Sale System Intrusions

    Science.gov (United States)

    2014-06-01

    hours, some point-of-sale system vendors install a remote desktop environment (RDE) product on the business’s point-of-sale system. Many hackers...who target point-of-sale systems begin by gathering a list 8 of common network ports associated with well-known remote desktop products . For...acquiring and analyzing the Windows Registry hives from the live machine, are particularly useful for analyzing compromised Windows based point-of

  14. Computing bubble-points of CO

    NARCIS (Netherlands)

    Ramdin, M.; Balaji, S.P.; Vicent Luna, J.M.; Torres-Knoop, A; Chen, Q.; Dubbeldam, D.; Calero, S; de Loos, T.W.; Vlugt, T.J.H.

    2016-01-01

    Computing bubble-points of multicomponent mixtures using Monte Carlo simulations is a non-trivial task. A new method is used to compute gas compositions from a known temperature, bubble-point pressure, and liquid composition. Monte Carlo simulations are used to calculate the bubble-points of

  15. How PowerPoint Is Killing Education

    Science.gov (United States)

    Isseks, Marc

    2011-01-01

    Although it is essential to incorporate new technologies into the classroom, says Isseks, one trend has negatively affected instruction--the misuse of PowerPoint presentations. The author describes how poorly designed PowerPoint presentations reduce complex thoughts to bullet points and reduce the act of learning to transferring text from slide to…

  16. A High Order Material Point Method

    NARCIS (Netherlands)

    Tielen, R.P.W.M.; Wobbes, E.D.; Möller, M.; Beuth, Lars

    2017-01-01

    The classical material point method (MPM) developed in the 90s is known for drawbacks which affect the quality of results. The movement of material points from one element to another leads to non-physical oscillations known as ‘grid crossing errors’. Furthermore, the use of material points as

  17. Lévy based Cox point processes

    DEFF Research Database (Denmark)

    Hellmund, Gunnar; Prokesová, Michaela; Jensen, Eva Bjørn Vedel

    2008-01-01

    In this paper we introduce Lévy-driven Cox point processes (LCPs) as Cox point processes with driving intensity function Λ defined by a kernel smoothing of a Lévy basis (an independently scattered, infinitely divisible random measure). We also consider log Lévy-driven Cox point processes (LLCPs...

  18. The Convex Coordinates of the Symmedian Point

    Science.gov (United States)

    Boyd, J. N.; Raychowdhury, P. N.

    2006-01-01

    In this note, we recall the convex (or barycentric) coordinates of the points of a closed triangular region. We relate the convex and trilinear coordinates of the interior points of the triangular region. We use the relationship between convex and trilinear coordinates to calculate the convex coordinates of the symmedian point of the triangular…

  19. Very smooth points of spaces of operators

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    ball has a very smooth point then the space has the Radon–Nikodým property. We give an example of a smooth Banach space without any very smooth points. Keywords. Very smooth points; spaces of operators; M-ideals. 1. Introduction. A Banach space X is said to be very smooth if every unit vector has a unique norming.

  20. Inhomogeneous Markov point processes by transformation

    DEFF Research Database (Denmark)

    Jensen, Eva B. Vedel; Nielsen, Linda Stougaard

    2000-01-01

    We construct parametrized models for point processes, allowing for both inhomogeneity and interaction. The inhomogeneity is obtained by applying parametrized transformations to homogeneous Markov point processes. An interesting model class, which can be constructed by this transformation approach......, is that of exponential inhomogeneous Markov point processes. Statistical inference For such processes is discussed in some detail....

  1. Characterization of finite spaces having dispersion points

    International Nuclear Information System (INIS)

    Al-Bsoul, A. T

    1997-01-01

    In this paper we shall characterize the finite spaces having dispersion points. Also, we prove that the dispersion point of a finite space with a dispersion points fixed under all non constant continuous functions which answers the question raised by J. C obb and W. Voxman in 1980 affirmatively for finite space. Some open problems are given. (author). 16 refs

  2. The relationship between bed size and profitability in South Carolina hospitals.

    Science.gov (United States)

    Kim, Yang K; Glover, Saundra H; Stoskopf, Carleen H; Boyd, Suzan D

    2002-01-01

    The purpose of the study is to identify factors affecting hospital profitability and to find the optimal hospital bed size that assures maximum profit. This is a cross-sectional study using survey data obtained from acute care hospitals in South Carolina in 1997. The relationship of hospital profitability and hospital bed size revealed that when bed size increases, hospital profitability increases, decreases, and then increases again. For the patient profit proportion, the turning points in bed size are 238.22 and 560.08. For the total profit proportion, the turning points in bed size are 223.31 and 503.86. The results on the relationship between bed size and hospital profitability indicate that medium-size hospitals have less profitability.

  3. Size Segregation in Sheared Jammed Colloids

    Science.gov (United States)

    Mbi, Armstrong; Blair, Daniel

    2013-03-01

    It is well known that granular materials can spontaneously size segregate when continuously driven. However, in jammed colloidal suspensions, this phenomenon is not well understood. Colloidal dispersions provide a unique system to study the structure and dynamics of jammed matter. In this talk, we present results of size segregation of a continuously sheared binary colloidal suspension well above point J. Our colloidal system is comprised of indexed-matched bi-disperse silica particles with diameters a = { 2 . 3 μm and 3 . 2 μm } and at ϕ 61 % , well above the colloidal glass transition. We apply a highly controlled shear at a constant shear rate through the use of a rheometer. By coupling our rheometer with a high-speed laser scanning confocal microscope, we directly image the structure and flow profiles of the suspension as it un-jams. We observe migration of the small and large species; large particles move to the top while the small particles move toward the bottom conserving the total volume fraction in all regions. Moreover, we find that an associating feature of segregation is a sustained shear band. Our results are consistent with a recently proposed void filling and squeeze expulsion mechanism. Funding is provided by NSF DMR #0847490.

  4. Size effects in crystal plasticity

    DEFF Research Database (Denmark)

    Borg, Ulrik

    2007-01-01

    Numerical analyses of plasticity size effects have been carried out for different problems using a developed strain gradient crystal plasticiy theory. The theory employs higher order stresses as work conjugates to slip gradients and uses higher order boundary conditions. Problems on localization...... of plastic flow in a single crystal, grain boundary effects in a bicrystal, and grain size effects in a polycrystal are studied. Single crystals containing micro-scale voids have also been analyzed at different loading conditions with focus on the stress and deformation fields around the voids, on void...

  5. Pro SharePoint 2010 Search

    CERN Document Server

    Noble, J; Bakman-Mikalski, Dan

    2011-01-01

    Pro SharePoint 2010 Search gives you expert advice on planning, deploying and customizing searches in SharePoint 2010. Drawing on the authors' extensive experience of working with real-world SharePoint deployments, this book teaches everything you'll need to know to create well-designed SharePoint solutions that always keep the end-user's experience in mind. Increase your search efficiency with SharePoint 2010's search functionality: extend the search user interface using third-party tools, and utilize analytics to improve relevancy. This practical hands-on book is a must-have resource for any

  6. Pro SharePoint 2013 administration

    CERN Document Server

    Garrett, Robert

    2013-01-01

    Pro SharePoint 2013 Administration is a practical guide to SharePoint 2013 for intermediate to advanced SharePoint administrators and power users, covering the out-of-the-box feature set and capabilities of Microsoft's collaboration and business productivity platform. SharePoint 2013 is an incredibly complex product, with many moving parts, new features, best practices, and 'gotchas.' Author Rob Garrett distills SharePoint's portfolio of features, capabilities, and utilities into an in-depth professional guide-with no fluff and copious advice-that is designed from scratch to be the manual Micr

  7. SharePoint 2013 for dummies

    CERN Document Server

    Withee, Ken

    2013-01-01

    The bestselling guide on running SharePoint, now updated to cover all the new features of SharePoint 2013 SharePoint Portal Server is an essential part of the enterprise infrastructure for many businesses. Building on the success of previous versions of SharePoint For Dummies, this new edition covers all the latest features of SharePoint 2013 and provides you with an easy-to-understand resource for making the most of all that this version has to offer. You'll learn how to get a site up and running, branded, and populated with content, workflow, and management. In addition, t

  8. Experimental Study of the Freezing Point of γ-Al2O3/Water Nanofluid

    Directory of Open Access Journals (Sweden)

    Thierry Maré

    2012-01-01

    Full Text Available Nanofluids are colloidal suspensions made of nanometer-sized particles dispersed in a conventional fluid. Their unusual thermal properties explain intensive investigations for several thermal and industrial applications. In this work, an experimental investigation was performed to measure the freezing point and to study the supercooling point made of alumina γ-Al2O3 nanoparticles with 30 nm diameter size and deionized water. Particles' volume fraction used in this work is ranging from 1% to 4%. The T-historic method based on the measurement of the point of inflexion was performed to measure the thermal properties such as the freezing point and the latent heat of solidification of the nanofluids for different concentrations. The results show that the supercooling degree decreases for the high particles volume concentrations and that the agglomeration does not influence the temperature of the freezing point. However, it makes the freezing process longer.

  9. On the role of body size, brain size, and eye size in visual acuity.

    Science.gov (United States)

    Corral-López, Alberto; Garate-Olaizola, Maddi; Buechel, Severine D; Kolm, Niclas; Kotrschal, Alexander

    2017-01-01

    The visual system is highly variable across species, and such variability is a key factor influencing animal behavior. Variation in the visual system, for instance, can influence the outcome of learning tasks when visual stimuli are used. We illustrate this issue in guppies ( Poecilia reticulata ) artificially selected for large and small relative brain size with pronounced behavioral differences in learning experiments and mate choice tests. We performed a study of the visual system by quantifying eye size and optomotor response of large-brained and small-brained guppies. This represents the first experimental test of the link between brain size evolution and visual acuity. We found that female guppies have larger eyes than male guppies, both in absolute terms and in relation to their body size. Likewise, individuals selected for larger brains had slightly larger eyes but not better visual acuity than small-brained guppies. However, body size was positively associated with visual acuity. We discuss our findings in relation to previous macroevolutionary studies on the evolution of brain morphology, eye morphology, visual acuity, and ecological variables, while stressing the importance of accounting for sensory abilities in behavioral studies. Pre-existing perceptual biases can be keys for the development of specific behavioral patterns. Hence, potential differences in sensory systems need to be taken into account in the study of animal behavior. We highlight this necessity concentrating on the visual domain and using experimental data on brain size-selected guppies in which we assessed eye size and visual acuity. Behavioral differences between large-brained and small-brained guppies in learning and mate choice predominantly relied on tests using visual cues. Analyses of visual capabilities in this system are therefore necessary. Furthermore, this system offers the unprecedented opportunity to experimentally test the relationship between brain size, eye morphology

  10. Ischemic Compression After Trigger Point Injection Affect the Treatment of Myofascial Trigger Points

    OpenAIRE

    Kim, Soo A; Oh, Ki Young; Choi, Won Hyuck; Kim, In Kyum

    2013-01-01

    Objective To investigate the effects of trigger point injection with or without ischemic compression in treatment of myofascial trigger points in the upper trapezius muscle. Methods Sixty patients with active myofascial trigger points in upper trapezius muscle were randomly divided into three groups: group 1 (n=20) received only trigger point injections, group 2 (n=20) received trigger point injections with 30 seconds of ischemic compression, and group 3 (n=20) received trigger point injectio...

  11. Size effects on cavitation instabilities

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Tvergaard, Viggo

    2006-01-01

    In metal-ceramic systems the constraint on plastic flow leads to so high stress triaxialities that cavitation instabilities may occur. If the void radius is on the order of magnitude of a characteristic length for the metal, the rate of void growth is reduced, and the possibility of unstable cavi...... as the void grows to a size well above the characteristic material length....

  12. On the optimal sizing problem

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui

    1994-01-01

    The paper studies the problem of determining the number and dimensions of sizes of apparel so as to maximize profits. It develops a simple one-variable bisection search algorithm that gives the optimal solution. An example is solved interactively using a Macintosh LC and Math CAD, a mathematical...

  13. Particle sizes from sectional data

    DEFF Research Database (Denmark)

    Pawlas, Zbynek; Nyengaard, Jens Randel; Jensen, Eva Bjørn Vedel

    2009-01-01

    We propose a new statistical method for obtaining information about particle size distributions from sectional data without specific assumptions about particle shape. The method utilizes recent advances in local stereology. We show how to estimate separately from sectional data the variance due t...

  14. Variability in human body size

    Science.gov (United States)

    Annis, J. F.

    1978-01-01

    The range of variability found among homogeneous groups is described and illustrated. Those trends that show significantly marked differences between sexes and among a number of racial/ethnic groups are also presented. Causes of human-body size variability discussed include genetic endowment, aging, nutrition, protective garments, and occupation. The information is presented to aid design engineers of space flight hardware and equipment.

  15. Analysis of glass fibre sizing

    DEFF Research Database (Denmark)

    Petersen, Helga Nørgaard; Kusano, Yukihiro; Brøndsted, Povl

    2014-01-01

    . Soxhlet extraction was used to extract components of the sizing from the glass fibres. The glass fibres, their extracts and coated glass plates were analysed by Thermo-Gravimetric Analysis combined with a mass spectrometer (TGA-MS), and Attenuated Total Reflectance Fourier Transform Infrared (ATR...

  16. Cohort Size Effects and Migration.

    Science.gov (United States)

    Wilson, Franklin D.

    1983-01-01

    Explores whether changes in the size of cohorts entering the labor force affected the propensity within the U.S. labor force to migrate and socioeconomic circumstances of migrants at destination within 1965-76. Suggests that a significant reduction in the volume of migration among members of the baby boom cohort was the primary adjustment…

  17. Automated measurement of diatom size

    Science.gov (United States)

    Spaulding, Sarah A.; Jewson, David H.; Bixby, Rebecca J.; Nelson, Harry; McKnight, Diane M.

    2012-01-01

    Size analysis of diatom populations has not been widely considered, but it is a potentially powerful tool for understanding diatom life histories, population dynamics, and phylogenetic relationships. However, measuring cell dimensions on a light microscope is a time-consuming process. An alternative technique has been developed using digital flow cytometry on a FlowCAM® (Fluid Imaging Technologies) to capture hundreds, or even thousands, of images of a chosen taxon from a single sample in a matter of minutes. Up to 30 morphological measures may be quantified through post-processing of the high resolution images. We evaluated FlowCAM size measurements, comparing them against measurements from a light microscope. We found good agreement between measurement of apical cell length in species with elongated, straight valves, including small Achnanthidium minutissimum (11-21 µm) and largeDidymosphenia geminata (87–137 µm) forms. However, a taxon with curved cells, Hannaea baicalensis (37–96 µm), showed differences of ~ 4 µm between the two methods. Discrepancies appear to be influenced by the choice of feret or geodesic measurement for asymmetric cells. We describe the operating conditions necessary for analysis of size distributions and present suggestions for optimal instrument conditions for size analysis of diatom samples using the FlowCAM. The increased speed of data acquisition through use of imaging flow cytometers like the FlowCAM is an essential step for advancing studies of diatom populations.

  18. Size, productivity, and international banking

    NARCIS (Netherlands)

    Buch, Claudia M.; Koch, Catherine T.; Koetter, Michael

    2011-01-01

    Heterogeneity in size and productivity is central to models that explain which manufacturing firms expert. This study presents descriptive evidence on similar heterogeneity among international banks as financial services providers. A novel and detailed bank-level data set reveals the volume and mode

  19. Bank Size and Systemic Risk

    NARCIS (Netherlands)

    Pais, A.; Stork, P.A.

    2013-01-01

    The global financial crisis that started in mid-2007 illustrates the relevance of systemic risk. One key driver of the systemic instability that materialised in the crisis was the elevated level of stress in large banks. We use EVT to analyse the effect of size on banks' univariate and systemic risk

  20. Measuring the Sizes of Stars

    Indian Academy of Sciences (India)

    their role in teaching and understanding physics. Stars, other than the Sun, appear to our unaided eyes as points of light. Large telescopes show an image .... a moving fringe pattern should be regarded as a lesser evil than a blurred image as we will see below. Box 1 has a rough transla- tion from the French of Fizeau's ...

  1. Modeling the Effect of Tumor Size in Early Breast Cancer

    Science.gov (United States)

    Verschraegen, Claire; Vinh-Hung, Vincent; Cserni, Gábor; Gordon, Richard; Royce, Melanie E.; Vlastos, Georges; Tai, Patricia; Storme, Guy

    2005-01-01

    Summary Background Data: The purpose of this study was to determine the type of relationship between tumor size and mortality in early breast carcinoma. Methods: The data was abstracted from 83,686 cases registered in the Surveillance, Epidemiology, and End Results Program of women diagnosed with primary breast carcinoma between 1988 and 1997 presenting with a T1–T2 lesion and no metastasis in whom axillary node dissection was performed: 58,070 women were node-negative (N0) and 25,616 were node-positive (N+). End point was death from any cause. Tumor size was modeled as a continuous variable by proportional hazards using a generalized additive models procedure. Results: Functionally, a Gompertzian expression exp(-exp(-(size-15)/10)) provided a good fit to the effect of tumor size (in millimeters) on mortality, irrespective of nodal status. Quantitatively, for tumor size between 3 and 50 mm, the increase of crude cumulative death rate (number of observed deaths divided by the number of patients at risk) increased with size from 10% to 25% for N0 and from 20% to 40% for N+. Conclusions: The functional relationship of tumor size with mortality is concordant with current knowledge of tumor growth. However, its qualitative and quantitative independence of nodal status is in contradiction with the prevailing concept of sequential disease progression from primary tumor to regional nodes. This argues against the perception that nodal metastases are caused by the primary tumor. PMID:15650642

  2. Student throughput variables and properties: Varying cohort sizes

    Directory of Open Access Journals (Sweden)

    Lucas C.A. Stoop

    2017-11-01

    Full Text Available A recent research paper described how student throughput variables and properties combine to explain the behaviour of stationary or simplified throughput systems. Such behaviour can be understood in terms of the locus of a point in the triangular admissible region of the H-S plane, where H represents headcounts and S successful credits, each depending on the system properties at that point. The efficiency of the student throughput process is given by the ratio S/H. Simplified throughput systems are characterised by stationary graduation and dropout patterns of students as well as by annual intakes of student cohorts of equal size. The effect of varying the size of the annual intakes of student cohorts is reported on here. The observations made lead to the establishment of a more generalised student throughput theory which includes the simplified theory as a special case. The generalised theory still retains the notion of a triangular admissible region in the H-S plane but with the size and shape of the triangle depending on the size of the student cohorts. The ratio S/H again emerges as the process efficiency measure for throughput systems in general with unchanged roles assigned to important system properties. This theory provides for a more fundamental understanding of student throughput systems encountered in real life. Significance: A generalised stationary student throughput theory through varying cohort sizes allows for a far better understanding of real student throughput systems.

  3. Predictive value of nerve trunk size in the neonate.

    Science.gov (United States)

    Rassouli-Kirchmeier, Roxana; Lok, Maarten Janssen; Kusters, Benno; Nagtegaal, Iris; Köster, Nils; van der Steeg, Herjan; Wijnen, Marc; de Blaauw, Ivo

    2014-08-01

    The diagnosis of Hirschsprung's disease (HD) remains challenging. The identification of ganglion cells is difficult and acetycholine esterase (AChE) staining can be subject to a great variability, particularly in the neonatal period (trunks greater than 40 µm are considered to be predictive for HD. The aim of this study was to evaluate the usefulness of measuring nerve trunk size in the newborn with HD. Out of 292 biopsies 69 could be reanalyzed by three independent researchers. 40 µm was used as cutoff point for nerve trunk size. They were subdivided into three groups: (a) diagnosis of HD certain at the first biopsy, (b) no HD and (c) diagnosis of HD remains doubtful and re-biopsy taken. In 87 % of group A nerve trunk size was ≥ 40 µm (SD 13.8). In 84 % of group B trunk size was trunk size. Using 40 µm as the cutoff point gave 13 % false-negative and 16 % false-positive cases. Measurement of the nerve trunk in the neonatal period does not seem to be a reliable method for detecting HD.

  4. Reduction of glycine particle size by impinging jet crystallization.

    Science.gov (United States)

    Tari, Tímea; Fekete, Zoltán; Szabó-Révész, Piroska; Aigner, Zoltán

    2015-01-15

    The parameters of crystallization processes determine the habit and particle size distribution of the products. A narrow particle size distribution and a small average particle size are crucial for the bioavailability of poorly water-soluble pharmacons. Thus, particle size reduction is often required during crystallization processes. Impinging jet crystallization is a method that results in a product with a reduced particle size due to the homogeneous and high degree of supersaturation at the impingement point. In this work, the applicability of the impinging jet technique as a new approach in crystallization was investigated for the antisolvent crystallization of glycine. A factorial design was applied to choose the relevant crystallization factors. The results were analysed by means of a statistical program. The particle size distribution of the crystallized products was investigated with a laser diffraction particle size analyser. The roundness and morphology were determined with the use of a light microscopic image analysis system and a scanning electron microscope. Polymorphism was characterized by differential scanning calorimetry and powder X-ray diffraction. Headspace gas chromatography was utilized to determine the residual solvent content. Impinging jet crystallization proved to reduce the particle size of glycine. The particle size distribution was appropriate, and the average particle size was an order of magnitude smaller (d(0.5)=8-35 μm) than that achieved with conventional crystallization (d(0.5)=82-680 μm). The polymorphic forms of the products were influenced by the solvent ratio. The quantity of residual solvent in the crystallized products was in compliance with the requirements of the International Conference on Harmonization. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. ''FUR'' - one size suits all

    International Nuclear Information System (INIS)

    Rutland, M.; Que, L.; Hassan, I.M.

    2000-01-01

    This work used amalgamated data from previous projects in order to test the concept that when organ function is expressed in terms of tracer kinetics, the results are independent of patient size or gender. Dynamic gamma camera studies were analysed by measuring the rate of movement of tracers from the blood into various organs. These rates were expressed as a ''fractional uptake rate'' (FUR), which is the fraction of tracer in the blood taken up by the organ per unit time. As these values were small, it was convenient to express the FUR per million seconds. The FUR was calculated using the expression FUR = SLOPE (of Rutland-Patlak plot), multiplied by B(0) (the blood curve value back-extrapolated to time zero), and divided by the TOTAL amount of tracer injected. Data were used from adult patients between the ages of 20 and 49 years who had normal organ function. Organ/tracer groups studied were the skeletal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-MAG3, the renal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-DTPA, the hepatic uptake of 99m Tc-colloid, the splenic uptake of 99m Tc-colloid, and the hepatic uptake of 99m Tc-DISIDA. Each organ/tracer group was divided into three subgroups according to patient size (smallest, middle and largest), and also into subgroups according to gender. Comparison of these subgroups did not show any significant size- or gender-related differences in FUR values. It is concluded that for patients with normally functioning organs the FUR is independent of patient size or gender. Thus, the FUR is a valuable way of expressing organ function, particularly in patients with unusual or rapidly changing body size, such as children. (orig.)

  6. Fixed-point image orthorectification algorithms for reduced computational cost

    Science.gov (United States)

    French, Joseph Clinton

    Imaging systems have been applied to many new applications in recent years. With the advent of low-cost, low-power focal planes and more powerful, lower cost computers, remote sensing applications have become more wide spread. Many of these applications require some form of geolocation, especially when relative distances are desired. However, when greater global positional accuracy is needed, orthorectification becomes necessary. Orthorectification is the process of projecting an image onto a Digital Elevation Map (DEM), which removes terrain distortions and corrects the perspective distortion by changing the viewing angle to be perpendicular to the projection plane. Orthorectification is used in disaster tracking, landscape management, wildlife monitoring and many other applications. However, orthorectification is a computationally expensive process due to floating point operations and divisions in the algorithm. To reduce the computational cost of on-board processing, two novel algorithm modifications are proposed. One modification is projection utilizing fixed-point arithmetic. Fixed point arithmetic removes the floating point operations and reduces the processing time by operating only on integers. The second modification is replacement of the division inherent in projection with a multiplication of the inverse. The inverse must operate iteratively. Therefore, the inverse is replaced with a linear approximation. As a result of these modifications, the processing time of projection is reduced by a factor of 1.3x with an average pixel position error of 0.2% of a pixel size for 128-bit integer processing and over 4x with an average pixel position error of less than 13% of a pixel size for a 64-bit integer processing. A secondary inverse function approximation is also developed that replaces the linear approximation with a quadratic. The quadratic approximation produces a more accurate approximation of the inverse, allowing for an integer multiplication calculation

  7. Critical sizes and flux distributions in the shut down pile

    International Nuclear Information System (INIS)

    Banchereau, A.; Berthier, P.; Genthon, J.P.; Gourdon, C.; Lattes, R.; Martelly, J.; Mazancourt, R. de; Portes, L.; Sagot, M.; Schmitt, A.P.; Tanguy, P.; Teste du Bailler, A.; Veyssiere, A.

    1957-01-01

    An important part of the experiments carried out on the reactor G1 during a period of shut-down has consisted in determinations of critical sizes, and measurements of flux distribution by irradiations of detectors. This report deals with the following points: 1- Critical sizes of the flat pile, the long pile and the uranium-thorium pile. 2- Flux charts of the same piles, and study of an exponential experiment. 3- Determination of the slit effect. 4- Calculation of the anisotropy of the lattice. 5- Description of the experimental apparatus of the irradiation measurements. (author) [fr

  8. Point DCT VLSI Architecture for Emerging HEVC Standard

    Directory of Open Access Journals (Sweden)

    Ashfaq Ahmed

    2012-01-01

    Full Text Available This work presents a flexible VLSI architecture to compute the -point DCT. Since HEVC supports different block sizes for the computation of the DCT, that is, 4×4 up to 32×32, the design of a flexible architecture to support them helps reducing the area overhead of hardware implementations. The hardware proposed in this work is partially folded to save area and to get speed for large video sequences sizes. The proposed architecture relies on the decomposition of the DCT matrices into sparse submatrices in order to reduce the multiplications. Finally, multiplications are completely eliminated using the lifting scheme. The proposed architecture sustains real-time processing of 1080P HD video codec running at 150 MHz.

  9. Remotely controlled repair of piping at Douglas Point

    International Nuclear Information System (INIS)

    Conrath, J.J.

    1983-06-01

    The 200 MWe Douglas Point Nuclear Generating Station which started operation in 1966 was Canada's first commercial nuclear power plant. In 1977, after 11 years of operation, leakage of heavy water was detected and traced to the Moderator Piping System (pipe sizes 19 mm to 76 mm) located in a vault below the reactor where the radiation fields during shutdown ranged up to 5000 R/Hr. Inspection using remotely operated TV cameras showed that a 'U' bolt clamp support had worn through the wall of one pipe and resulted in the leakage and also that wear was occurring on other pipes. An extensive repair plan was subsequently undertaken in the form of a joint venture of the designer-owner Atomic Energy of Canada Limited, and the builder-operator, Ontario Hydro. This paper describes the equipment and procedures used in remotely controlled repairs at Douglas Point

  10. Unions of onions: preprocessing imprecise points for fast onion decomposition

    Directory of Open Access Journals (Sweden)

    Maarten Löffler

    2014-01-01

    Full Text Available Let D be a set of n pairwise disjoint unit disks in the plane. We describe how to build a data structure for D so that for any point set P containing exactly one point from each disk, we can quickly find the onion decomposition (convex layers of P.Our data structure can be built in O(n log n time and has linear size. Given P, we can find its onion decomposition in O(nlog k time, where k is the number of layers. We also provide a matching lower bound.Our solution is based on a recursive space decomposition, combined with a fast algorithm to compute the union of two disjoint onion decompositions. 

  11. A sequential point process model and Bayesian inference for spatial point patterns with linear structures

    DEFF Research Database (Denmark)

    Møller, Jesper; Rasmussen, Jakob Gulddahl

    We introduce a flexible spatial point process model for spatial point patterns exhibiting linear structures, without incorporating a latent line process. The model is given by an underlying sequential point process model, i.e. each new point is generated given the previous points. Under this model...... points is such that the dependent cluster point is likely to occur closely to a previous cluster point. We demonstrate the flexibility of the model for producing point patterns with linear structures, and propose to use the model as the likelihood in a Bayesian setting when analyzing a spatial point...... pattern exhibiting linear structures but where the exact mechanism responsible for the formations of lines is unknown. We illustrate this methodology by analyzing two spatial point pattern data sets (locations of bronze age graves in Denmark and locations of mountain tops in Spain) without knowing which...

  12. Exceptional points enhance sensing in an optical microcavity

    Science.gov (United States)

    Chen, Weijian; Kaya Özdemir, Şahin; Zhao, Guangming; Wiersig, Jan; Yang, Lan

    2017-08-01

    Sensors play an important part in many aspects of daily life such as infrared sensors in home security systems, particle sensors for environmental monitoring and motion sensors in mobile phones. High-quality optical microcavities are prime candidates for sensing applications because of their ability to enhance light-matter interactions in a very confined volume. Examples of such devices include mechanical transducers, magnetometers, single-particle absorption spectrometers, and microcavity sensors for sizing single particles and detecting nanometre-scale objects such as single nanoparticles and atomic ions. Traditionally, a very small perturbation near an optical microcavity introduces either a change in the linewidth or a frequency shift or splitting of a resonance that is proportional to the strength of the perturbation. Here we demonstrate an alternative sensing scheme, by which the sensitivity of microcavities can be enhanced when operated at non-Hermitian spectral degeneracies known as exceptional points. In our experiments, we use two nanoscale scatterers to tune a whispering-gallery-mode micro-toroid cavity, in which light propagates along a concave surface by continuous total internal reflection, in a precise and controlled manner to exceptional points. A target nanoscale object that subsequently enters the evanescent field of the cavity perturbs the system from its exceptional point, leading to frequency splitting. Owing to the complex-square-root topology near an exceptional point, this frequency splitting scales as the square root of the perturbation strength and is therefore larger (for sufficiently small perturbations) than the splitting observed in traditional non-exceptional-point sensing schemes. Our demonstration of exceptional-point-enhanced sensitivity paves the way for sensors with unprecedented sensitivity.

  13. Method Points: towards a metric for method complexity

    Directory of Open Access Journals (Sweden)

    Graham McLeod

    1998-11-01

    Full Text Available A metric for method complexity is proposed as an aid to choosing between competing methods, as well as in validating the effects of method integration or the products of method engineering work. It is based upon a generic method representation model previously developed by the author and adaptation of concepts used in the popular Function Point metric for system size. The proposed technique is illustrated by comparing two popular I.E. deliverables with counterparts in the object oriented Unified Modeling Language (UML. The paper recommends ways to improve the practical adoption of new methods.

  14. Gibbs free energy, surface stress and melting point of nanoparticle

    International Nuclear Information System (INIS)

    Luo, Wenhua; Hu, Wangyu

    2013-01-01

    Two approaches to calculating Gibbs free energy of nanoparticle are compared. It is found that the contribution from the vibrational entropy of surface atoms of nanoparticle to its Gibbs free energy can be ignored, and Jiang et al.'s formula [J. Phys. Chem. B 105 (2001) 6275] [27] for calculating surface stress is only valid around room temperature. Furthermore, an approximate relationship between surface stress and surface free energy of nanoparticles is revealed. Finally, the reason why effect of size dependent surface energy on melting point of nanoparticle was neglected is clarified

  15. POINT CLOUD VISUALIZATION IN AN OPEN SOURCE 3D GLOBE

    Directory of Open Access Journals (Sweden)

    M. De La Calle

    2012-09-01

    Full Text Available During the last years the usage of 3D applications in GIS is becoming more popular. Since the appearance of Google Earth, users are familiarized with 3D environments. On the other hand, nowadays computers with 3D acceleration are common, broadband access is widespread and the public information that can be used in GIS clients that are able to use data from the Internet is constantly increasing. There are currently several libraries suitable for this kind of applications. Based on these facts, and using libraries that are already developed and connected to our own developments, we are working on the implementation of a real 3D GIS with analysis capabilities. Since a 3D GIS such as this can be very interesting for tasks like LiDAR or Laser Scanner point clouds rendering and analysis, special attention is given to get an optimal handling of very large data sets. Glob3 will be a multidimensional GIS in which 3D point clouds could be explored and analysed, even if they are consist of several million points.The latest addition to our visualization libraries is the development of a points cloud server that works regardless of the cloud's size. The server receives and processes petitions from a 3d client (for example glob3, but could be any other, such as one based on WebGL and delivers the data in the form of pre-processed tiles, depending on the required level of detail.

  16. The source of visual size adaptation.

    Science.gov (United States)

    Zeng, Hang; Kreutzer, Sylvia; Fink, Gereon R; Weidner, Ralph

    2017-12-01

    Size adaptation describes the tendency of the visual system to adjust neural responsiveness of size representations after prolonged exposure to particular stimulations. A larger (or smaller) adaptor stimulus influences the perceived size of a similar test stimulus shown subsequently. Size adaptation may emerge on various processing levels. Functional representations of the adaptor to which the upcoming stimulus is adapted may be coded early in the visual system mainly reflecting retinal size. Alternatively, size adaptation may involve higher order processes that take into account additional information such as an object's estimated distance from the observer, hence reflecting perceived size. The present study investigated whether size adaptation is based on the retinal or the perceived size of an adaptor stimulus. A stimulus' physical and perceived sizes were orthogonally varied using perceived depth via binocular disparity, employing polarized 3D glasses. Four different adaptors were used, which varied in physical size, perceived size, or both. Two pairs of adaptors which were identical in physical size did not cause significantly different adaptation effects although they elicited different perceived sizes which were sufficiently large to produce differential aftereffects when induced by stimuli that physically differed in size. In contrast, there was a significant aftereffect when adaptors differed in physical size but were matched in perceived size. Size adaptation was thus unaffected by perceived size and binocular disparity. Our data suggest that size adaptation emerges from neural stages where information from both eyes is still coded in separate channels without binocular interactions, such as the lateral geniculate nucleus.

  17. Interval Mathematics Applied to Critical Point Transitions

    Directory of Open Access Journals (Sweden)

    Benito A. Stradi

    2012-03-01

    Full Text Available The determination of critical points of mixtures is important for both practical and theoretical reasons in the modeling of phase behavior, especially at high pressure. The equations that describe the behavior of complex mixtures near critical points are highly nonlinear and with multiplicity of solutions to the critical point equations. Interval arithmetic can be used to reliably locate all the critical points of a given mixture. The method also verifies the nonexistence of a critical point if a mixture of a given composition does not have one. This study uses an interval Newton/Generalized Bisection algorithm that provides a mathematical and computational guarantee that all mixture critical points are located. The technique is illustrated using several example problems. These problems involve cubic equation of state models; however, the technique is general purpose and can be applied in connection with other nonlinear problems.

  18. SharePoint 2007 Collaboration For Dummies

    CERN Document Server

    Harvey, Greg

    2009-01-01

    If you're looking for a way to help your teams access what they need to know, work together, and get the job done, SharePoint can do just that. SharePoint 2007 Collaboration For Dummies shows you the easiest way to set up and customize SharePoint, manage your data, interact using SharePoint blogs and wikis, integrate Office programs, and make your office more productive. You'll learn what SharePoint can do and how to make it work for your business, understand the technical terms, and enable your people to collaborate on documents and spreadsheets. You'll even discover how to get SharePoint hel

  19. Describing chaotic attractors: Regular and perpetual points

    Science.gov (United States)

    Dudkowski, Dawid; Prasad, Awadhesh; Kapitaniak, Tomasz

    2018-03-01

    We study the concepts of regular and perpetual points for describing the behavior of chaotic attractors in dynamical systems. The idea of these points, which have been recently introduced to theoretical investigations, is thoroughly discussed and extended into new types of models. We analyze the correlation between regular and perpetual points, as well as their relation with phase space, showing the potential usefulness of both types of points in the qualitative description of co-existing states. The ability of perpetual points in finding attractors is indicated, along with its potential cause. The location of chaotic trajectories and sets of considered points is investigated and the study on the stability of systems is shown. The statistical analysis of the observing desired states is performed. We focus on various types of dynamical systems, i.e., chaotic flows with self-excited and hidden attractors, forced mechanical models, and semiconductor superlattices, exhibiting the universality of appearance of the observed patterns and relations.

  20. Kantian Turning Point in Gadamer's Philosophical Hermeneutics

    Directory of Open Access Journals (Sweden)

    Kristína Bosáková

    2016-11-01

    Full Text Available The paper is treating the theme of a Kantian turning-point in the philosophical hermeneutics of H.- G. Gadamer based on of the harmonic relationship between metaphysics and science in Kantian philosophy from the point of view of the philosophical hermeneutics of Gadamer. The philosophical work of Kant had such an influence on Gadamer that without exaggerating we can talk about the Kantian turning-point in Gadamerian hermeneutics. Grondin, a former student of Gadamer, is talking about Kantian turning-point on the field of aesthetics, but in reality Kantian turning-point means much more than a mere change in the reception of the concept of judgement. It is a discovery of harmonical relationship between the beauty and the moral, between the reason and the sensitivity, between the modern sciences and the metaphysical tradition in the Kantian philosophy, made by Gadamer. This is what we call the Kantian turning-point in Gadamerian hermeneutics.

  1. Bayesian analysis of Markov point processes

    DEFF Research Database (Denmark)

    Berthelsen, Kasper Klitgaard; Møller, Jesper

    2006-01-01

    Recently Møller, Pettitt, Berthelsen and Reeves introduced a new MCMC methodology for drawing samples from a posterior distribution when the likelihood function is only specified up to a normalising constant. We illustrate the method in the setting of Bayesian inference for Markov point processes...... a partially ordered Markov point process as the auxiliary variable. As the method requires simulation from the "unknown" likelihood, perfect simulation algorithms for spatial point processes become useful....

  2. Infra-red fixed points in supersymmetry

    Indian Academy of Sciences (India)

    ¾c /font>, and c stands for the color quadratic Casimir of the field. Fixed points arise when R* ¼ or when R*. /nobr>. ´S-½. µ ´r ·b¿µ. The stability of the solutions may be tested by linearizing the system about the fixed points. For the non-trivial fixed points we need to consider the eigenvalues of the stability matrix whose ...

  3. Size of quorum sensing communities

    DEFF Research Database (Denmark)

    Ferkinghoff-Borg, Jesper; Sams, Thomas

    2014-01-01

    Ensembles of bacteria are able to coordinate their phenotypic behavior in accordance with the size, density, and growth state of the ensemble. This is achieved through production and exchange of diffusible signal molecules in a cell–cell regulatory system termed quorum sensing. In the generic...... quorum sensor a positive feedback in the production of signal molecules defines the conditions at which the collective behavior switches on. In spite of its conceptual simplicity, a proper measure of biofilm colony ‘‘size’’ appears to be lacking. We establish that the cell density multiplied...... by a geometric factor which incorporates the boundary conditions constitutes an appropriate size measure. The geometric factor is the square of the radius for a spherical colony or a hemisphere attached to a reflecting surface. If surrounded by a rapidly exchanged medium, the geometric factor is divided by three...

  4. Point-Cloud Compression for Vehicle-Based Mobile Mapping Systems Using Portable Network Graphics

    Science.gov (United States)

    Kohira, K.; Masuda, H.

    2017-09-01

    A mobile mapping system is effective for capturing dense point-clouds of roads and roadside objects Point-clouds of urban areas, residential areas, and arterial roads are useful for maintenance of infrastructure, map creation, and automatic driving. However, the data size of point-clouds measured in large areas is enormously large. A large storage capacity is required to store such point-clouds, and heavy loads will be taken on network if point-clouds are transferred through the network. Therefore, it is desirable to reduce data sizes of point-clouds without deterioration of quality. In this research, we propose a novel point-cloud compression method for vehicle-based mobile mapping systems. In our compression method, point-clouds are mapped onto 2D pixels using GPS time and the parameters of the laser scanner. Then, the images are encoded in the Portable Networking Graphics (PNG) format and compressed using the PNG algorithm. In our experiments, our method could efficiently compress point-clouds without deteriorating the quality.

  5. Teen Sized Humanoid Robot: Archie

    Science.gov (United States)

    Baltes, Jacky; Byagowi, Ahmad; Anderson, John; Kopacek, Peter

    This paper describes our first teen sized humanoid robot Archie. This robot has been developed in conjunction with Prof. Kopacek’s lab from the Technical University of Vienna. Archie uses brushless motors and harmonic gears with a novel approach to position encoding. Based on our previous experience with small humanoid robots, we developed software to create, store, and play back motions as well as control methods which automatically balance the robot using feedback from an internal measurement unit (IMU).

  6. Wolf Point Substation, Roosevelt County, Montana

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    The Western Area Power Administration (Western), an agency of the United States Department of Energy, is proposing to construct the 115-kV Wolf Point Substation near Wolf Point in Roosevelt County, Montana (Figure 1). As part of the construction project, Western's existing Wolf Point Substation would be taken out of service. The existing 115-kV Wolf Point Substation is located approximately 3 miles west of Wolf Point, Montana (Figure 2). The substation was constructed in 1949. The existing Wolf Point Substation serves as a Switching Station'' for the 115-kV transmission in the region. The need for substation improvements is based on operational and reliability issues. For this environmental assessment (EA), the environmental review of the proposed project took into account the removal of the old Wolf Point Substation, rerouting of the five Western lines and four lines from the Cooperatives and Montana-Dakota Utilities Company, and the new road into the proposed substation. Reference to the new proposed Wolf Point Substation in the EA includes these facilities as well as the old substation site. The environmental review looked at the impacts to all resource areas in the Wolf Point area. 7 refs., 6 figs.

  7. ELMs, strike point jumps and SOL currents

    International Nuclear Information System (INIS)

    Solano, Emilia R.; Jachmich, S.; Villone, F.; Hawkes, N.; Guenther, K.; Korotkov, A.; Stamp, M.; Andrew, P.; Conboy, J.; Mattews, G.F.; Corre, Y.; Loarte, A.; Pitts, R.A.; Cenedese, A.; Kempenaars, M.; Bolzonella, T.; Rachlew, E.

    2005-01-01

    Plasma equilibria before and after ELMs in JET are investigated. ELMs could be associated with fragile equilibria and separatrix instabilities: previously closed field lines would open up, releasing plasma current and leading to the formation of a new, smaller separatrix. This model could explain experimental observations of sudden jumps and shifts in strike point positions. Novel instability mechanisms are discussed to explain the large transient jumps observed in the strike point position: positive X-point instability, due to positive toroidal current density at the X-point and diamagnetic instability, due to negative inboard toroidal current density. (author)

  8. EPA Region 1 Environmentally Sensitive Areas (Points)

    Data.gov (United States)

    U.S. Environmental Protection Agency — This coverage represents point equivalents of environmentally sensitive areas in EPA New England. This coverage represents polygon equivalents of environmentally...

  9. Wolf Point Substation, Roosevelt County, Montana

    International Nuclear Information System (INIS)

    1991-05-01

    The Western Area Power Administration (Western), an agency of the United States Department of Energy, is proposing to construct the 115-kV Wolf Point Substation near Wolf Point in Roosevelt County, Montana (Figure 1). As part of the construction project, Western's existing Wolf Point Substation would be taken out of service. The existing 115-kV Wolf Point Substation is located approximately 3 miles west of Wolf Point, Montana (Figure 2). The substation was constructed in 1949. The existing Wolf Point Substation serves as a ''Switching Station'' for the 115-kV transmission in the region. The need for substation improvements is based on operational and reliability issues. For this environmental assessment (EA), the environmental review of the proposed project took into account the removal of the old Wolf Point Substation, rerouting of the five Western lines and four lines from the Cooperatives and Montana-Dakota Utilities Company, and the new road into the proposed substation. Reference to the new proposed Wolf Point Substation in the EA includes these facilities as well as the old substation site. The environmental review looked at the impacts to all resource areas in the Wolf Point area. 7 refs., 6 figs

  10. Homotopies and the Universal Fixed Point Property

    DEFF Research Database (Denmark)

    Szymik, Markus

    2015-01-01

    . To even specify the problem, we introduce the universal fixed point property. Our results apply in particular to the analysis of convex subspaces of Banach spaces, to the topology of finite-dimensional manifolds and CW complexes, and to the combinatorics of Kolmogorov spaces associated with finite posets.......A topological space has the fixed point property if every continuous self-map of that space has at least one fixed point. We demonstrate that there are serious restraints imposed by the requirement that there be a choice of fixed points that is continuous whenever the self-map varies continuously...

  11. Professional SharePoint 2013 development

    CERN Document Server

    Alirezaei, Reza; Ranlett, Matt; Hillier, Scot; Wilson, Brian; Fried, Jeff; Swider, Paul

    2013-01-01

    Thorough coverage of development in SharePoint 2013 A team of well-known Microsoft MVPs joins forces in this fully updated resource, providing you with in-depth coverage of development tools in the latest iteration of the immensely popular SharePoint. From building solutions to building custom workflow and content management applications, this book shares field-tested best practices on all aspect of SharePoint 2013 development. Offers a thorough look at Windows Azure and SharePoint 2013Includes new chapters on Application Life Cycle Management, developing apps in ShareP

  12. Red Sesbania Distribution - points [ds80

    Data.gov (United States)

    California Natural Resource Agency — This layer contains point data for the red sesbania (Sesbania punicea) database. The database represents historic and current observations by various individuals of...

  13. Teach yourself visually PowerPoint 2013

    CERN Document Server

    Wood, William

    2013-01-01

    A straightforward, visual approach to learning the new PowerPoint 2013! PowerPoint 2013 boasts updated features and new possibilities; this highly visual tutorial provides step-by-step instructions to help you learn all the capabilities of PowerPoint 2013. It covers the basics, as well as all the exciting new changes and additions in a series of easy-to-follow, full-color, two-page tutorials. Learn how to create slides, dress them up using templates and graphics, add sound and animation, and more. This book is the ideal ""show me, don't tell me"" guide to PowerPoint 2013.De

  14. Mastering Microsoft SharePoint Foundation 2010

    CERN Document Server

    Callahan, C A

    2011-01-01

    Everything IT professionals need to create collaborative solutions. SharePoint Foundation 2010 is the newest version of a powerful collaboration tool used in many Exchange-enabled organizations. This book gets network professionals and business application administrators up to speed on the updates, features, and installation procedures, preparing them to create powerful collaboration structures for their companies.: Microsoft SharePoint Foundation 2010 is the successor to Windows SharePoint Services 3.0 and is used with Microsoft Office SharePoint Server to enable collaboration; this guide pre

  15. Blossom Point Satellite Tracking and Command Station

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: The Blossom Point Satellite Command and Tracking Facility (BP) provides engineering and operational support to several complex space systems for the Navy...

  16. 33 CFR 167.451 - In the Santa Barbara Channel: Between Point Vicente and Point Conception.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false In the Santa Barbara Channel: Between Point Vicente and Point Conception. 167.451 Section 167.451 Navigation and Navigable Waters COAST....451 In the Santa Barbara Channel: Between Point Vicente and Point Conception. (a) A separation zone is...

  17. 46 CFR 7.130 - Point Conception, CA to Point Sur, CA.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Point Conception, CA to Point Sur, CA. 7.130 Section 7.130 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC BOUNDARY LINES Pacific Coast § 7.130 Point Conception, CA to Point Sur, CA. (a) A line drawn from the...

  18. 47 CFR 101.137 - Interconnection of private operational fixed point-to-point microwave stations.

    Science.gov (United States)

    2010-10-01

    ... point-to-point microwave stations. 101.137 Section 101.137 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.137 Interconnection of private operational fixed point-to-point microwave stations. Private...

  19. 46 CFR 7.125 - Point Vincente, CA to Point Conception, CA.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Point Vincente, CA to Point Conception, CA. 7.125 Section 7.125 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY PROCEDURES APPLICABLE TO THE PUBLIC BOUNDARY LINES Pacific Coast § 7.125 Point Vincente, CA to Point Conception, CA. (a) A line drawn from...

  20. Application of cokriging techniques for the estimation of hail size

    Science.gov (United States)

    Farnell, Carme; Rigo, Tomeu; Martin-Vide, Javier

    2018-01-01

    There are primarily two ways of estimating hail size: the first is the direct interpolation of point observations, and the second is the transformation of remote sensing fields into measurements of hail properties. Both techniques have advantages and limitations as regards generating the resultant map of hail damage. This paper presents a new methodology that combines the above mentioned techniques in an attempt to minimise the limitations and take advantage of the benefits of interpolation and the use of remote sensing data. The methodology was tested for several episodes with good results being obtained for the estimation of hail size at practically all the points analysed. The study area presents a large database of hail episodes, and for this reason, it constitutes an optimal test bench.

  1. SIZE OF LIVESTOCK AGRICULTURAL OPERATIONS

    Directory of Open Access Journals (Sweden)

    Bazbanela Stere

    2015-07-01

    Full Text Available The main goal of the paper is to map the performance of Romanian farms from the perspective of livestock agricultural operations using principal component analysis technique (PCA and similarities between Romania and other countries from UE. The empirical results reveal that animal breedings farms are grouped into two categories :small and middle sized farms ; and the fact that Romania , one of Europe’s major forces in the field of livestock husbandry, has come to be one of the biggest importers of food products, although, by tradition, it is one of the continent’s countries with ideal conditions for breeding all species of animals. When clustering the countries we observ that in countries such as Greece, Italy, Portugal, Spain, cow farms, for example, do not exceed 10-16 heads and in Holland, England, Denmark, Belgium and France, the average farm size reaches 30-70 heads of milk cows. The cluster analysis revealed that in livestock operations, animal stock is the one that generates production, while the animal number indicates the size of the livestock unit.

  2. Tick size and stock returns

    Science.gov (United States)

    Onnela, Jukka-Pekka; Töyli, Juuso; Kaski, Kimmo

    2009-02-01

    Tick size is an important aspect of the micro-structural level organization of financial markets. It is the smallest institutionally allowed price increment, has a direct bearing on the bid-ask spread, influences the strategy of trading order placement in electronic markets, affects the price formation mechanism, and appears to be related to the long-term memory of volatility clustering. In this paper we investigate the impact of tick size on stock returns. We start with a simple simulation to demonstrate how continuous returns become distorted after confining the price to a discrete grid governed by the tick size. We then move on to a novel experimental set-up that combines decimalization pilot programs and cross-listed stocks in New York and Toronto. This allows us to observe a set of stocks traded simultaneously under two different ticks while holding all security-specific characteristics fixed. We then study the normality of the return distributions and carry out fits to the chosen distribution models. Our empirical findings are somewhat mixed and in some cases appear to challenge the simulation results.

  3. Egg components, egg size, and hatchling size in leatherback turtles.

    Science.gov (United States)

    Wallace, Bryan P; Sotherland, Paul R; Tomillo, Pilar Santidrian; Bouchard, Sarah S; Reina, Richard D; Spotila, James R; Paladino, Frank V

    2006-12-01

    Relationships between egg size, egg components, and neonate size have been investigated across a wide range of oviparous taxa. Differences in egg traits among taxa reflect not only phylogenetic differences, but also interactions between biotic (i.e., maternal resource allocation) and abiotic (i.e. nest environment conditions) factors. We examined relationships between egg mass, egg composition, and hatchling size in leatherback turtles (Dermochelys coriacea) because of the unique egg and reproductive characteristics of this species and of sea turtles in general. Albumen comprised 63.0%+/-2.8% (mean+/-S.D.) of egg mass and explained most of the variation in egg mass, whereas yolk comprised only 33.0%+/-2.7%. Additionally, leatherback albumen dry mass was approximately 16% of albumen wet mass. Whereas hatchling mass increased significantly with egg mass (n = 218 clutches), hatchling mass increased by only approximately 2 g for each 10 g increase in egg mass and was approximately 10-20 g greater than yolk mass. Taken together, our results indicate that albumen might play a particularly significant role in leatherback embryonic development, and that leatherback eggs are both capable of water uptake from the nest substrate and also possess a large reservoir of water in the albumen. Relationships between egg mass and egg components, such as variation in egg mass being largely explained by variation in albumen mass and egg mass containing a relatively high proportion of albumen solids, are more similar to bird eggs than to eggs of other non-avian reptiles. However, hatchling mass correlates more with yolk mass than with albumen mass, unlike patterns observed in bird eggs of similar composition.

  4. APPROXIMATION OF VOLUME AND BRANCH SIZE DISTRIBUTION OF TREES FROM LASER SCANNER DATA

    Directory of Open Access Journals (Sweden)

    P. Raumonen

    2012-09-01

    Full Text Available This paper presents an approach for automatically approximating the above-ground volume and branch size distribution of trees from dense terrestrial laser scanner produced point clouds. The approach is based on the assumption that the point cloud is a sample of a surface in 3D space and the surface is locally like a cylinder. The point cloud is covered with small neighborhoods which conform to the surface. Then the neighborhoods are characterized geometrically and these characterizations are used to classify the points into trunk, branch, and other points. Finally, proper subsets are determined for cylinder fitting using geometric characterizations of the subsets.

  5. Fracture mechanics characterisation of medium-size adhesive joint specimens

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Jacobsen, T.K.

    2004-01-01

    Medium-size specimens (adhesive layer were tested in four point bending to determine their load carrying capacity. Specimens having different thickness were tested. Except for onespecimen, the cracking occurred as cracking...... along the adhesive layer; initially cracking occurred along the adhesive/laminate interface, but after some crack extension the cracking took place inside the laminate (for one specimen the later part of thecracking occurred unstably along the adhesive/ laminate interface). Crack bridging by fibres...

  6. Single supplier single retailer inventory model controlled by the reorder and shipping points with sharing information

    Science.gov (United States)

    Ho, Wen-Tsung; Hsiao, Yu-Cheng

    2012-04-01

    This study investigated the integrated stochastic inventory problem for a two-stage supply chain consisting of a single retailer and a single supplier. By using batch shipment policy, the expected total cost can be significantly reduced. An equally sized batch shipment model, controlled by both the reorder and shipping points, with sharing information by enterprise resource planning and radio frequency identification is constructed. The problem is solved optimally by the proposed algorithm that determines the economic lot size, the optimal batch sizes and number of batches. A numerical example is included to illustrate the algorithmic procedures and to prove that the model controlled both by the reorder and shipping points is superior to the classic model controlled only by the reorder point.

  7. 40 CFR 428.50 - Applicability; description of the small-sized general molded, extruded, and fabricated rubber...

    Science.gov (United States)

    2010-07-01

    ... small-sized general molded, extruded, and fabricated rubber plants subcategory. 428.50 Section 428.50... RUBBER MANUFACTURING POINT SOURCE CATEGORY Small-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.50 Applicability; description of the small-sized general molded, extruded, and...

  8. 40 CFR 428.70 - Applicability; description of the large-sized general molded, extruded, and fabricated rubber...

    Science.gov (United States)

    2010-07-01

    ... large-sized general molded, extruded, and fabricated rubber plants subcategory. 428.70 Section 428.70... RUBBER MANUFACTURING POINT SOURCE CATEGORY Large-Sized General Molded, Extruded, and Fabricated Rubber Plants Subcategory § 428.70 Applicability; description of the large-sized general molded, extruded, and...

  9. Size, shape, and form: concepts of allometry in geometric morphometrics.

    Science.gov (United States)

    Klingenberg, Christian Peter

    2016-06-01

    Allometry refers to the size-related changes of morphological traits and remains an essential concept for the study of evolution and development. This review is the first systematic comparison of allometric methods in the context of geometric morphometrics that considers the structure of morphological spaces and their implications for characterizing allometry and performing size correction. The distinction of two main schools of thought is useful for understanding the differences and relationships between alternative methods for studying allometry. The Gould-Mosimann school defines allometry as the covariation of shape with size. This concept of allometry is implemented in geometric morphometrics through the multivariate regression of shape variables on a measure of size. In the Huxley-Jolicoeur school, allometry is the covariation among morphological features that all contain size information. In this framework, allometric trajectories are characterized by the first principal component, which is a line of best fit to the data points. In geometric morphometrics, this concept is implemented in analyses using either Procrustes form space or conformation space (the latter also known as size-and-shape space). Whereas these spaces differ substantially in their global structure, there are also close connections in their localized geometry. For the model of small isotropic variation of landmark positions, they are equivalent up to scaling. The methods differ in their emphasis and thus provide investigators with flexible tools to address specific questions concerning evolution and development, but all frameworks are logically compatible with each other and therefore unlikely to yield contradictory results.

  10. Fixed points in a group of isometries

    NARCIS (Netherlands)

    Voorneveld, M.

    2000-01-01

    The Bruhat-Tits xed point theorem states that a group of isometries on a complete metric space with negative curvature possesses a xed point if it has a bounded orbit. This theorem is extended by a relaxation of the negative curvature condition in terms of the w-distance functions introduced by Kada

  11. Modeling complex points up to isotopy

    OpenAIRE

    Slapar, Marko

    2011-01-01

    In this paper we examine the structure of complex points of real 4-manifolds embedded into complex 3-manifolds up to isotopy. We show that there are only two types of complex points up to isotopy and as a consequence, show that any such embedding can be deformed by isotopy to a manifold having 2-complete neighborhood basis.

  12. Impedance analysis of acupuncture points and pathways

    International Nuclear Information System (INIS)

    Teplan, Michal; Kukucka, Marek; Ondrejkovicová, Alena

    2011-01-01

    Investigation of impedance characteristics of acupuncture points from acoustic to radio frequency range is addressed. Discernment and localization of acupuncture points in initial single subject study was unsuccessfully attempted by impedance map technique. Vector impedance analyses determined possible resonant zones in MHz region.

  13. Singularities and Conjugate Points in FLRW Spacetimes

    NARCIS (Netherlands)

    Lam, Huibert het; Prokopec, Tom

    2017-01-01

    Conjugate points play an important role in the proofs of the singularity theorems of Hawking and Penrose. We examine the relation between singularities and conjugate points in FLRW spacetimes with a singularity. In particular we prove a theorem that when a non-comoving, non-spacelike geodesic in a

  14. State estimation for temporal point processes

    NARCIS (Netherlands)

    van Lieshout, Maria Nicolette Margaretha

    2015-01-01

    This paper is concerned with combined inference for point processes on the real line observed in a broken interval. For such processes, the classic history-based approach cannot be used. Instead, we adapt tools from sequential spatial point processes. For a range of models, the marginal and

  15. QCD critical point: The race is on

    Indian Academy of Sciences (India)

    2015-05-06

    May 6, 2015 ... Critical points in a phase diagram in the temperature–density plane are special for several reasons. Starting from their .... Extending this approach to larger and fine lattices appears not to be easy because of an .... (filled) points display the results for the ratio (root) method (from ref. [21]). Figure 1 shows the ...

  16. Supporting Multiple Pointing Devices in Microsoft Windows

    DEFF Research Database (Denmark)

    Westergaard, Michael

    2002-01-01

    In this paper the implementation of a Microsoft Windows driver including APIs supporting multiple pointing devices is presented. Microsoft Windows does not natively support multiple pointing devices controlling independent cursors, and a number of solutions to this have been implemented by us...

  17. Mahalanobis Distance Based Iterative Closest Point

    DEFF Research Database (Denmark)

    Hansen, Mads Fogtmann; Blas, Morten Rufus; Larsen, Rasmus

    2007-01-01

    This paper proposes an extension to the standard iterative closest point method (ICP). In contrast to ICP, our approach (ICP-M) uses the Mahalanobis distance to align a set of shapes thus assigning an anisotropic independent Gaussian noise to each point in the reference shape. The paper introduce...

  18. Magnetic Fixed Points and Emergent Supersymmetry

    DEFF Research Database (Denmark)

    Antipin, Oleg; Mojaza, Matin; Pica, Claudio

    2013-01-01

    We establish in perturbation theory the existence of fixed points along the renormalization group flow for QCD with an adjoint Weyl fermion and scalar matter reminiscent of magnetic duals of QCD [1-3]. We classify the fixed points by analyzing their basin of attraction. We discover that among...

  19. The Psychic Organ Point of Autistic Syntax

    Science.gov (United States)

    Amir, Dana

    2013-01-01

    This paper deals with autistic syntax and its expressions both in the fully fledged autistic structure and in the autistic zones of other personality structures. The musical notion of the organ point serves as a point of departure in an attempt to describe how autistic syntax transforms what was meant to constitute the substrate for linguistic…

  20. Impedance analysis of acupuncture points and pathways

    Science.gov (United States)

    Teplan, Michal; Kukučka, Marek; Ondrejkovičová, Alena

    2011-12-01

    Investigation of impedance characteristics of acupuncture points from acoustic to radio frequency range is addressed. Discernment and localization of acupuncture points in initial single subject study was unsuccessfully attempted by impedance map technique. Vector impedance analyses determined possible resonant zones in MHz region.

  1. Product fixed points in ordered metric spaces

    OpenAIRE

    Turinici, Mihai

    2011-01-01

    All product fixed point results in ordered metric spaces based on linear contractive conditions are but a vectorial form of the fixed point statement due to Nieto and Rodriguez-Lopez [Order, 22 (2005), 223-239], under the lines in Matkowski [Bull. Acad. Pol. Sci. (Ser. Sci. Math. Astronom. Phys.), 21 (1973), 323-324].

  2. Determinants of College Grade Point Averages

    Science.gov (United States)

    Bailey, Paul Dean

    2012-01-01

    Chapter 2: The Role of Class Difficulty in College Grade Point Averages. Grade Point Averages (GPAs) are widely used as a measure of college students' ability. Low GPAs can remove a students from eligibility for scholarships, and even continued enrollment at a university. However, GPAs are determined not only by student ability but also by the…

  3. Model for Semantically Rich Point Cloud Data

    Science.gov (United States)

    Poux, F.; Neuville, R.; Hallot, P.; Billen, R.

    2017-10-01

    This paper proposes an interoperable model for managing high dimensional point clouds while integrating semantics. Point clouds from sensors are a direct source of information physically describing a 3D state of the recorded environment. As such, they are an exhaustive representation of the real world at every scale: 3D reality-based spatial data. Their generation is increasingly fast but processing routines and data models lack of knowledge to reason from information extraction rather than interpretation. The enhanced smart point cloud developed model allows to bring intelligence to point clouds via 3 connected meta-models while linking available knowledge and classification procedures that permits semantic injection. Interoperability drives the model adaptation to potentially many applications through specialized domain ontologies. A first prototype is implemented in Python and PostgreSQL database and allows to combine semantic and spatial concepts for basic hybrid queries on different point clouds.

  4. Monitoring the Freezing Point of Buffalo Milk.

    Science.gov (United States)

    Pesce, Antonella; Salzano, Caterina; De Felice, Anna; Garofalo, Francesca; Liguori, Salvatore; De Santo, Annunziata; Palermo, Pierpaolo; Guarino, Achille

    2016-04-19

    The aim of this study was to evaluate the basic freezing point of buffalo milk. Bulk milk samples were collected from buffalo and cattle farms in Caserta area from 2008 to 2014. The analysis involved a total of 1886 buffalo milk samples and 1711 bovine milk samples. These were also tested for fat, protein and lactose contents by means of infrared spectrometry. The freezing point was determined by means of a thermistor cryoscope. Data underwent statistical analysis. Our research showed an average freezing point of -0.528°C for buffalo milk and -0.522°C for bovine milk. Given the lack of data on the freezing point of buffalo milk, our study provides the first indication of a basic freezing point of the milk of this species in Italy.

  5. SharePoint 2010 Development For Dummies

    CERN Document Server

    Withee, Ken

    2011-01-01

    A much-needed guide that shows you how to leverage SharePoint tools without writing a line of code!. The great news about SharePoint is…you don't need to be a seasoned .NET developer to develop custom functions for it. This book shows you how to use SharePoint Designer, Report Builder, Dashboard Designer, InfoPath, Excel, Word, Visio, and the SharePoint web-based UI to design and develop—without ever writing a line of code! Learn how to customize your site, build SharePoint apps, start social networking, or add Web parts.  This straightforward guide makes everything easier.: Introduces you to

  6. Thinning spatial point processes into Poisson processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Schoenberg, Frederic Paik

    This paper describes methods for randomly thinning certain classes of spatial point processes. In the case of a Markov point process, the proposed method involves a dependent thinning of a spatial birth-and-death process, where clans of ancestors associated with the original points are identified......, and where one simulates backwards and forwards in order to obtain the thinned process. In the case of a Cox process, a simple independent thinning technique is proposed. In both cases, the thinning results in a Poisson process if and only if the true Papangelou conditional intensity is used, and thus can...... be used as a diagnostic for assessing the goodness-of-fit of a spatial point process model. Several examples, including clustered and inhibitive point processes, are considered....

  7. Thinning spatial point processes into Poisson processes

    DEFF Research Database (Denmark)

    Møller, Jesper; Schoenberg, Frederic Paik

    2010-01-01

    In this paper we describe methods for randomly thinning certain classes of spatial point processes. In the case of a Markov point process, the proposed method involves a dependent thinning of a spatial birth-and-death process, where clans of ancestors associated with the original points...... are identified, and where we simulate backwards and forwards in order to obtain the thinned process. In the case of a Cox process, a simple independent thinning technique is proposed. In both cases, the thinning results in a Poisson process if and only if the true Papangelou conditional intensity is used, and......, thus, can be used as a graphical exploratory tool for inspecting the goodness-of-fit of a spatial point process model. Several examples, including clustered and inhibitive point processes, are considered....

  8. MODEL FOR SEMANTICALLY RICH POINT CLOUD DATA

    Directory of Open Access Journals (Sweden)

    F. Poux

    2017-10-01

    Full Text Available This paper proposes an interoperable model for managing high dimensional point clouds while integrating semantics. Point clouds from sensors are a direct source of information physically describing a 3D state of the recorded environment. As such, they are an exhaustive representation of the real world at every scale: 3D reality-based spatial data. Their generation is increasingly fast but processing routines and data models lack of knowledge to reason from information extraction rather than interpretation. The enhanced smart point cloud developed model allows to bring intelligence to point clouds via 3 connected meta-models while linking available knowledge and classification procedures that permits semantic injection. Interoperability drives the model adaptation to potentially many applications through specialized domain ontologies. A first prototype is implemented in Python and PostgreSQL database and allows to combine semantic and spatial concepts for basic hybrid queries on different point clouds.

  9. Benthic faunal sampling adjacent to the Barbers Point ocean outfall, Oahu, Hawaii, 1986-2010 (NODC Accession 9900098)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Benthic fauna in the vicinity of the Barbers Point (Honouliuli) ocean outfall were sampled from 1986-2010. To assess the environmental quality, sediment grain size...

  10. Class size versus class composition

    DEFF Research Database (Denmark)

    Jones, Sam

    Raising schooling quality in low-income countries is a pressing challenge. Substantial research has considered the impact of cutting class sizes on skills acquisition. Considerably less attention has been given to the extent to which peer effects, which refer to class composition, also may affect...... outcomes. This study uses new microdata from East Africa, incorporating test score data for over 250,000 children, to compare the likely efficacy of these two types of interventions. Endogeneity bias is addressed via fixed effects and instrumental variables techniques. Although these may not fully mitigate...

  11. Size Estimates in Inverse Problems

    KAUST Repository

    Di Cristo, Michele

    2014-01-06

    Detection of inclusions or obstacles inside a body by boundary measurements is an inverse problems very useful in practical applications. When only finite numbers of measurements are available, we try to detect some information on the embedded object such as its size. In this talk we review some recent results on several inverse problems. The idea is to provide constructive upper and lower estimates of the area/volume of the unknown defect in terms of a quantity related to the work that can be expressed with the available boundary data.

  12. Municipal Size and Electoral Participation

    DEFF Research Database (Denmark)

    Mouritzen, Poul Erik; Rose, Lawrence; Denters, Bas

    The issue of the appropriate scale for local government has regularly appeared on the agenda of public sector reformers. In the empirical work devoted to this issue, the principal focus has been on the implications of size for efficiency in local service provision. Relatively less emphasis has been...... are based on a strategy whereby theoretical models are developed and investigated for several different indicators of local democracy in a successive, cumulative fashion using a ‘funnel of causality logic’. This paper reports on results concerning local electoral political participation. We conclude...

  13. On Size Biased Kumaraswamy Distribution

    Directory of Open Access Journals (Sweden)

    Dreamlee Sharma

    2016-08-01

    Full Text Available In this paper, we introduce and study the size-biased form of Kumaraswamy distribution. The Kumaraswamy distribution which has drawn considerable attention in hydrology and related areas was proposed by Kumarswamy. The new distribution is derived under sizebiased probability of sampling taking the weights as the variate values. Various distributional and characterizing properties of the model are studied. The methods of maximum likelihood and matching quantiles estimation are employed to estimate the parameters of the proposed model. Finally, we apply the proposed model to simulated and real data sets.

  14. Comparative study of building footprint estimation methods from LiDAR point clouds

    Science.gov (United States)

    Rozas, E.; Rivera, F. F.; Cabaleiro, J. C.; Pena, T. F.; Vilariño, D. L.

    2017-10-01

    Building area calculation from LiDAR points is still a difficult task with no clear solution. Their different characteristics, such as shape or size, have made the process too complex to automate. However, several algorithms and techniques have been used in order to obtain an approximated hull. 3D-building reconstruction or urban planning are examples of important applications that benefit of accurate building footprint estimations. In this paper, we have carried out a study of accuracy in the estimation of the footprint of buildings from LiDAR points. The analysis focuses on the processing steps following the object recognition and classification, assuming that labeling of building points have been previously performed. Then, we perform an in-depth analysis of the influence of the point density over the accuracy of the building area estimation. In addition, a set of buildings with different size and shape were manually classified, in such a way that they can be used as benchmark.

  15. Wrox SharePoint 2010 SharePoint911 three-pack

    CERN Document Server

    Klindt, Todd; Mason, Jennifer; Rogers, Laura; Drisgill, Randy; Ross, John; Riemann, Larry; Perran, Amanda; Perran, Shane; Sanford, Jacob J; Stubbs, Paul; Caravajal, Steve

    2012-01-01

    The Wrox SharePoint 2010 SharePoint911 Three-Pack combines the contents of three full e-books written by the experts from SharePoint911.  That's over 1800 pages of hands-on advice from Todd Klindt, Shane Young, Laura Rogers, Randy Drisgill, Jennifer Mason, John Ross, and Larry Riemann, among others. In Beginning SharePoint 2010: Building Business Solutions with SharePoint (ISBN 978-0-470-61789-2) by Amanda Perran, Shane Perran, Jennifer Mason, and Laura Rogers, readers learn the core concepts, terminology, and features of SharePoint 2010. In Professiona

  16. Implicit LOD using points ordering for processing and visualisation in Point Cloud Servers

    OpenAIRE

    Cura, Rémi; Perret, Julien; Paparoditis, Nicolas

    2016-01-01

    Lidar datasets now commonly reach Billions of points and are very dense. Using these point cloud becomes challenging, as the high number of points is intractable for most applications and for visualisation.In this work we propose a new paradigm to easily get a portable geometric Level Of Details (LOD) inside a Point Cloud Server.The main idea is to not store the LOD information in an external additional file, but instead to store it implicitly by exploiting the order of the points.The point c...

  17. Beam-beam deflections as an interaction point diagnostic for the SLC

    International Nuclear Information System (INIS)

    Bambade, P.; Erickson, R.

    1986-05-01

    A technique is described for non-destructive measurement and monitoring of the steering offset of the electron and positron beams at the interaction point of the SLC, based on using stripline beam-position monitors to measure the centroid of one beam as it is deflected by the opposing beam. This technique is also expected to provide diagnostic information related to the spot size of the micron-size beams

  18. A neutral model with fluctuating population size and its effective size.

    OpenAIRE

    Iizuka, Masaru; Tachida, Hidenori; Matsuda, Hirotsugu

    2002-01-01

    We consider a diffusion model with neutral alleles whose population size is fluctuating randomly. For this model, the effects of fluctuation of population size on the effective size are investigated. The effective size defined by the equilibrium average heterozygosity is larger than the harmonic mean of population size but smaller than the arithmetic mean of population size. To see explicitly the effects of fluctuation of population size on the effective size, we investigate a special case wh...

  19. A phylogenetic analysis of egg size, clutch size, spawning mode, adult body size, and latitude in reef fishes

    Science.gov (United States)

    Kasimatis, Katja; Riginos, Cynthia

    2016-06-01

    Theoretical treatments of egg size in fishes suggest that constraints on reproductive output should create trade-offs between the size and number of eggs produced per spawn. For marine reef fishes, the observation of distinct reproductive care strategies (demersal guarding, egg scattering, and pelagic spawning) has additionally prompted speculation that these strategies reflect alternative fitness optima with selection on egg size differing by reproductive mode and perhaps latitude. Here, we aggregate data from 278 reef fish species and test whether clutch size, reproductive care, adult body size, and latitudinal bands (i.e., tropical, subtropical, and temperate) predict egg size, using a statistically unified framework that accounts for phylogenetic correlations among traits. We find no inverse relationship between species egg size and clutch size, but rather that egg size differs by reproductive mode (mean volume for demersal eggs = 1.22 mm3, scattered eggs = 0.18 mm3, pelagic eggs = 0.52 mm3) and that clutch size is strongly correlated with adult body size. Larger eggs were found in temperate species compared with tropical species in both demersal guarders and pelagic spawners, but this difference was not strong when accounting for phylogenetic correlations, suggesting that differences in species composition underlies regional differences in egg size. In summary, demersal guarders are generally small fishes with small clutch sizes that produce large eggs. Pelagic spawners and egg scatterers are variable in adult and clutch size. Although pelagic spawned eggs are variable in size, those of scatterers are consistently small.

  20. Superposition and alignment of labeled point clouds.

    Science.gov (United States)

    Fober, Thomas; Glinca, Serghei; Klebe, Gerhard; Hüllermeier, Eyke

    2011-01-01

    Geometric objects are often represented approximately in terms of a finite set of points in three-dimensional euclidean space. In this paper, we extend this representation to what we call labeled point clouds. A labeled point cloud is a finite set of points, where each point is not only associated with a position in three-dimensional space, but also with a discrete class label that represents a specific property. This type of model is especially suitable for modeling biomolecules such as proteins and protein binding sites, where a label may represent an atom type or a physico-chemical property. Proceeding from this representation, we address the question of how to compare two labeled points clouds in terms of their similarity. Using fuzzy modeling techniques, we develop a suitable similarity measure as well as an efficient evolutionary algorithm to compute it. Moreover, we consider the problem of establishing an alignment of the structures in the sense of a one-to-one correspondence between their basic constituents. From a biological point of view, alignments of this kind are of great interest, since mutually corresponding molecular constituents offer important information about evolution and heredity, and can also serve as a means to explain a degree of similarity. In this paper, we therefore develop a method for computing pairwise or multiple alignments of labeled point clouds. To this end, we proceed from an optimal superposition of the corresponding point clouds and construct an alignment which is as much as possible in agreement with the neighborhood structure established by this superposition. We apply our methods to the structural analysis of protein binding sites.