WorldWideScience

Sample records for platte river software

  1. Winter raptor use of the Platte and North Platte River Valleys in south central Nebraska

    Science.gov (United States)

    Lingle, G.R.

    1989-01-01

    Winter distribution and abundance of raptors were monitored within the Platte and North Platte river valleys. Data were collected along 265 km of census routes along the Platte and North Platte rivers during the winters of 1978-1979 and 1979-1980. Observations recorded during the second winter involved less observation time and were at somewhat different periods. There were 1574 sightings of 15 species representing 3 raptor families. Number of raptors observed on 54 days from 15 November to 13 February 1978-1979 was 48.3 per 100 km. In 20 days of observation from 5 December to 6 March 1979-1980, 39.7 raptors were observed per 100 km. Small mammal indices were 21 and 12 captures per 1000 trap nights during November 1978 and 1979, respectively. Raptors were sighted most frequently in riverine habitat and least in pasture and tilled fields. American kestrels (Falco sparverius) (11.1 individuals/100 km), red-tailed hawks (Buteo jamaicensis) (9.9), and bald eagles (Haliaeetus leucocephalus) (9.6) were the most frequently sighted raptors. Northern harrier (Circus cyaneus), rough-legged hawk (B. lagopus), and prairie falcon (P. mexicanus) sightings were 3.4, 3.4, and 1.7, respectively. Nine species were seen at a frequency of less than 1.0 individuals/100 km. Improved foraging conditions throughout the region resulted in fewer raptors sighted in 1979-1980.

  2. Temporal Differences in the Hydrologic Regime of the Lower Platte River, Nebraska, 1895-2006

    Science.gov (United States)

    Ginting, Daniel; Zelt, Ronald B.; Linard, Joshua I.

    2008-01-01

    Hydroecological Integrity Assessment Process software developed by the U.S. Geological Survey. A subset of 27 nonredundant indices (of the 171 indices) was selected using principal component analysis. Indices that described monthly streamflow?mean, maximum, minimum, skewness, and coefficients of variation?also were used. Comparison of these selected indices allowed determination of temporal differences among the six 11-water-year periods for each gaging station. The lower Platte River basin was affected by moderate to severe drought conditions in the 1934?44 period. The widespread drought was preceded by mildly to moderately wet conditions in the 1895?1906 period, followed by incipient drought to incipiently wet conditions in the 1951?61 periods and mildly wet conditions in 1966?76 period, moderately wet conditions in the 1985?1995 period, and incipient drought to mildly wet conditions in the 1996?2006 period. Monthly streamflow of the Platte River from Duncan through Louisville, Nebraska, correlated significantly with the monthly Palmer Hydrological Drought Index. Temporal differences in median values of monthly-mean and monthly-maximum streamflow measured at Duncan, North Bend, and Ashland stations between the two moderately wet periods (1895?1905 and 1985?95) indicated that streamflow storage reservoirs and regulation some time after 1906 significantly reduced monthly streamflow magnitude and amplitude?the difference between the highest and lowest median values of monthly mean streamflow. Effects of storage reservoirs on the median values of monthly-minimum streamflow were less obvious. Temporal differences among the other five periods, from 1934 through 2006 when streamflow was affected by storage and regulation, indicated the predominant effects of contrasting climate conditions on median values of monthly mean, maximum, and minimum streamflow. Significant temporal differences in monthly streamflow values were evident mainly between the two periods of greatly

  3. Contaminant exposure and reproductive health of sandhill cranes in the Central Platte River Valley, Nebraska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The central Platte River Valley provides crucial staging habitat for the endangered whooping crane (Grus americana) and the mid-continent population of sandhill...

  4. Lead Shot availability to birds using the North Platte River near a trap and Skeet range

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A trap and skeet shooting range gun club is located on the North Platte River, below the Guernsey Reservoir in Wyoming. In 1999, we obtained sediment samples to...

  5. Ice Jams on the Little Missouri River, North Dakota and North Platte River, Nebraska

    Science.gov (United States)

    Pang, B. P.; Brookman, D. A.

    2004-12-01

    During the winter months, rivers in the north central United States have a phenomenon occurring, which is known as "ice jams". The initial melting of the river ice causes broken ice buildup, which acts as a quasi-dam restricting the natural flow. Ice jams severely impact ecosystems and are known to cause extensive damage to the channels, as well as man-made structures. The focus of this paper is on ice jams on the Little Missouri River in North Dakota and the North Platte River in Nebraska. Previous investigations done on the Lower Platte River valley, as well as the Missouri River basin, have shown that the primary cause of ice jams on these rivers is due to the spring thaw. The initial portion of the paper will discuss the pattern of ice jams on these rivers, as well as some mitigation strategies for control of these ice jams. The second section will deal with the modeling of ice jams on these river systems using HEC-RAS. This model will be comprised of both two and three-dimensional aspects of the rivers.

  6. Simulation of water quantity exchange between groundwater and the Platte River water, central Nebraska

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The authors demonstrate the importance of the simulation of the water quantity exchange between river water and groundwater to a better understanding of the hydrologic relations between a river and nearby aquifer where groundwater is pumped extensively but only seasonally. And MODFLOW is used to design the stream-aquifer model in which the pumpage of more than 1000 wells was simulated. The river gaining and river losing processes were analyzed. Simulation results suggest that continuation of over-extraction of groundwater will gradually increase the depletion volume in the river year after year and more depletion will occur in later years. The exchange manner between groundwater and the Platte River differs from place to place. The Platte River loses water to the adjacent aquifer in the west part of the study area, and gains water from the adjacent aquifer in the east part of the study area.

  7. Native and European haplotypes of Phragmites Australis (common reed) in the central Platte River, Nebraska

    Science.gov (United States)

    Larson, D.L.; Galatowitsch, S.M.; Larson, J.L.

    2011-01-01

    Phragmites australis (common reed) is known to have occurred along the Platte River historically, but recent rapid increases in both distribution and density have begun to impact habitat for migrating sandhill cranes and nesting piping plovers and least terns. Invasiveness in Phragmites has been associated with the incursion of a European genotype (haplotype M) in other areas; determining the genotype of Phragmites along the central Platte River has implications for proper management of the river system. In 2008 we sampled Phragmites patches along the central Platte River from Lexington to Chapman, NE, stratified by bridge segments, to determine the current distribution of haplotype E (native) and haplotype M genotypes. In addition, we did a retrospective analysis of historical Phragmites collections from the central Platte watershed (1902-2006) at the Bessey Herbarium. Fresh tissue from the 2008 survey and dried tissue from the herbarium specimens were classified as haplotype M or E using the restriction fragment length polymorphism procedure. The European haplotype was predominant in the 2008 samples: only 14 Phragmites shoots were identified as native haplotype E; 224 were non-native haplotype M. The retrospective analysis revealed primarily native haplotype individuals. Only collections made in Lancaster County, near Lincoln, NE, were haplotype M, and the earliest of these was collected in 1973. ?? 2011 Copyright by the Center for Great Plains Studies, University of Nebraska-Lincoln.

  8. The Physical and Biochemical Alteration of the Platte River by Phragmites australis, an Invasive Species of Wetland Grass

    Science.gov (United States)

    Mohr, R. C.; Krueger, R.; Triplett, L.; Michal, T.; Kettenring, K. M.

    2014-12-01

    Invasive species can have a profound impact on the ecosystems to which they are introduced. Beginning in 2003, the Platte River, Nebraska, USA, was invaded by an aggressive species of wetland grass, Phragmites australis. The invasion by Phragmites, in combination with river flow reductions due to agricultural irrigation, has drastically altered the character and morphology of the river. Once a braided and largely unvegetated river, the Platte had become densely colonized with vegetation by 2010. We measured some physical and biochemical characteristics of Platte River sediments to infer how that vegetation has changed the system. Specifically, we measured particle size, which is an indicator of flow velocity, and biogenic silica (BSi), which is a critical source of silicon for some aquatic organisms. Sediment was collected from areas of the riverbed that are unvegetated, and from areas that are occupied by Phragmites or native vegetation. Particle size was measured using a laser diffractometer to determine how much fine particle deposition was occurring. Biogenic silica (BSi) concentrations were measured using timed NaOH digestions and inductively coupled plasma mass spectrometry (ICP-MS). Our results indicate that stands of Phragmites in the Platte River cause more deposition of finer silt-sized particles than other parts of the river that are unvegetated or are occupied by native vegetation. Also, Phragmites increased the sequestration of BSi in the river sediments. These changes to the Platte reverberate beyond the river itself; by sequestering silica in sediments, Phragmites could be diminishing the supply of silica to estuaries and coastal oceans. Hypothesizing that the silica content of the Platte's water had been reduced by the arrival of Phragmites, we measured dissolved (DSi) and biogenic silica (BSi) concentrations of Platte water using ICP-MS to compare to existing data from the 1990s.

  9. U.S. Department of Energy electric and hybrid vehicle Site Operator Program at Platte River Power Authority. Final report, July 3, 1991--August 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Emmert, R.A.

    1996-12-31

    The Platte River Power Authority (Platte River) is a political subdivision of the state of Colorado, owned by the four municipalities of Fort Collins, Loveland, Longmont and Estes Park, Colorado. Platte River is a non-profit, publicly owned, joint-action agency formed to construct, operate and maintain generating plants, transmission systems and related facilities for the purpose of delivering to the four municipalities electric energy for distribution and resale. Platte River, as a participant in the US Department of Energy (DOE) Site Operator Program, worked to accomplish the Site Operator Program goals and objectives to field test and evaluate electric and electric-hybrid vehicles and electric vehicle systems in a real world application/environment. This report presents results of Platte River`s program (Program) during the five-years Platte River participated in the DOE Site Operator Program. Platte River participated in DOE Site Operator Program from July 3, 1991 through August 31, 1996. During its Program, Platte River conducted vehicle tests and evaluations, and electric vehicle demonstrations in the Front Range region of Northern Colorado. Platte River also investigated electric vehicle infrastructure issues and tested infrastructure components. Platte River`s Program objectives were as follows: evaluate the year round performance, operational costs, reliability, and life cycle costs of electric vehicles in the Front Range region of Northern Colorado; evaluate an electric vehicle`s usability and acceptability as a pool vehicle; test any design improvements or technological improvements on a component level that may be made available to PRPA and which can be retrofit into vehicles; and develop, test and evaluate, and demonstrate components to be used in charging electric vehicles.

  10. Investigating the accuracy of photointerpreted unvegetated channel widths in a braided river system: a Platte River case study

    Science.gov (United States)

    Werbylo, Kevin L.; Farnsworth, Jason M.; Baasch, David M.; Farrell, Patrick D.

    2017-02-01

    The central Platte River in Nebraska, USA, has undergone substantial channel narrowing since basin settlement in the mid-nineteenth century. Many researchers have studied the causes of channel narrowing and its implications for endangered species that use wide, shallow channel segments with barren sandbars. As a result, changes in metrics such as unvegetated channel width have been studied. With few exceptions, these measures are estimated from aerial imagery without mention of error in relation to actual channel conditions and/or investigator bias. This issue is not unique to central Platte River studies, as a general lack of commentary is apparent regarding the direct comparison of channel planform characteristics interpreted from aerial imagery relative to those measured in the field. Here we present a case study where data collected by the Platte River Recovery Implementation Program was used to make multiple comparisons using three years of field-measured unvegetated channel widths and those photointerpreted from aerial imagery. Widths were interpreted by three investigators, who identified similar widths in almost all cases. Photointerpretation from imagery collected during the fall resulted in unvegetated width estimates that were more consistent with field measurments than estimates derived using imagery collected in June. Differences were attributed to three main factors: (1) influences of discharge on photointerpretation of unvegetated channel width; (2) increases in vegetative cover throughout the growing season; and (3) resolution of imagery. Most importantly, we concluded that photointerpretation of unvegetated widths from imagery collected during high flows can result in significant over estimation of unvegetated channel width.

  11. Reproductive ecology of interior least tern and piping plover in relation to Platte River hydrology and sandbar dynamics.

    Science.gov (United States)

    Farnsworth, Jason M; Baasch, David M; Smith, Chadwin B; Werbylo, Kevin L

    2017-05-01

    Investigations of breeding ecology of interior least tern (Sternula antillarum athalassos) and piping plover (Charadrius melodus) in the Platte River basin in Nebraska, USA, have embraced the idea that these species are physiologically adapted to begin nesting concurrent with the cessation of spring floods. Low use and productivity on contemporary Platte River sandbars have been attributed to anthropomorphically driven changes in basin hydrology and channel morphology or to unusually late annual runoff events. We examined distributions of least tern and piping plover nest initiation dates in relation to the hydrology of the historical central Platte River (CPR) and contemporary CPR and lower Platte River (LPR). We also developed an emergent sandbar habitat model to evaluate the potential for reproductive success given observed hydrology, stage-discharge relationships, and sandbar height distributions. We found the timing of the late-spring rise to be spatially and temporally consistent, typically occurring in mid-June. However, piping plover nest initiation peaks in May and least tern nest initiation peaks in early June; both of which occur before the late spring rise. In neither case does there appear to be an adaptation to begin nesting concurrent with the cessation of spring floods. As a consequence, there are many years when no successful reproduction is possible because emergent sandbar habitat is inundated after most nests have been initiated, and there is little potential for successful renesting. The frequency of nest inundation, in turn, severely limits the potential for maintenance of stable species subpopulations on Platte River sandbars. Why then did these species expand into and persist in a basin where the hydrology is not ideally suited to their reproductive ecology? We hypothesize the availability and use of alternative off-channel nesting habitats, like sandpits, may allow for the maintenance of stable species subpopulations in the Platte River

  12. Groundwater Quality and Nitrogen Use Efficiency in Nebraska's Central Platte River Valley.

    Science.gov (United States)

    Ferguson, Richard B

    2015-03-01

    Groundwater nitrate contamination has been an issue in the Platte River Valley of Nebraska since the 1960s, with groundwater nitrate-N concentrations frequently in excess of 10 mg L. This article summarizes education and regulatory efforts to reduce the environmental impact of irrigated crop production in the Platte River Valley. In 1988, a Groundwater Management Area (GWMA) was implemented in the Central Platte Natural Resources District to encourage adoption of improved management practices. Since 1988, there have been steady declines in average groundwater nitrate-N concentrations of about 0.15 mg NO-N L yr in much of the GWMA (from 19 to 15 mg NO-N L). However, N use efficiency (NUE) (partial factor productivity for N [PFP]) has increased very little from 1988 to 2012 (60-65 kg grain kg N), whereas statewide PFP increased from 49 to 67 kg grain kg N in the same period. Although growers are encouraged to credit N from sources besides fertilizer (e.g., soil residual, legumes, irrigation water, and manure), confidence in and use of credits tended to decrease as credits became larger; there was a tendency toward an average N rate regardless of credit-based recommendations. This information, coupled with data from other studies, suggests that much of the decline in groundwater nitrate can be attributed to improved irrigation management-especially conversion from furrow to sprinkler irrigation-and to a lesser extent to improved timing of N application. The development and adoption of improved N management practices, such as fertigation, controlled-release N formulation, and use of crop canopy sensors for in-season N application may be required for further significant NUE gains in these irrigated systems.

  13. Flooding in the South Platte River and Fountain Creek Basins in eastern Colorado, September 9–18, 2013

    Science.gov (United States)

    Kimbrough, Robert A.; Holmes, Jr., Robert R.

    2015-11-25

    On September 9, 2013, rain began to fall in eastern Colorado as a large low-pressure system pulled plumes of tropical moisture northward from the Pacific Ocean and the Gulf of Mexico. By September 16, 2013, as much as 12 to 20 inches of rain had fallen in the foothills of the Front Range of the Southern Rocky Mountains and adjacent plains near Colorado Springs, Colorado, north to the Colorado-Wyoming border. The rain caused major flooding during September 9–18, 2013, in a large part of the South Platte River Basin and in the Fountain Creek Basin. The floods resulted in several fatalities, more than 31,000 damaged or destroyed structures, and an estimated 3 billion dollars in damages. The U.S. Geological Survey (USGS) documented peak stage, streamflow, or both from the flood event for 80 sites located on selected rivers and streams in the South Platte River and Fountain Creek Basins and on the Platte River in Nebraska. The majority of flood-peak streamflows occurred on September 12 or 13, 2013, coinciding with the period of maximum rainfall. The flood resulted in new record peak streamflows at 17 streamgages having at least 10 years of record; 13 in the South Platte River Basin and 4 in the Fountain Creek Basin.

  14. Mapping grasslands suitable for cellulosic biofuels in the Greater Platte River Basin, United States

    Science.gov (United States)

    Wylie, Bruce K.; Gu, Yingxin

    2012-01-01

    Biofuels are an important component in the development of alternative energy supplies, which is needed to achieve national energy independence and security in the United States. The most common biofuel product today in the United States is corn-based ethanol; however, its development is limited because of concerns about global food shortages, livestock and food price increases, and water demand increases for irrigation and ethanol production. Corn-based ethanol also potentially contributes to soil erosion, and pesticides and fertilizers affect water quality. Studies indicate that future potential production of cellulosic ethanol is likely to be much greater than grain- or starch-based ethanol. As a result, economics and policy incentives could, in the near future, encourage expansion of cellulosic biofuels production from grasses, forest woody biomass, and agricultural and municipal wastes. If production expands, cultivation of cellulosic feedstock crops, such as switchgrass (Panicum virgatum L.) and miscanthus (Miscanthus species), is expected to increase dramatically. The main objective of this study is to identify grasslands in the Great Plains that are potentially suitable for cellulosic feedstock (such as switchgrass) production. Producing ethanol from noncropland holdings (such as grassland) will minimize the effects of biofuel developments on global food supplies. Our pilot study area is the Greater Platte River Basin, which includes a broad range of plant productivity from semiarid grasslands in the west to the fertile corn belt in the east. The Greater Platte River Basin was the subject of related U.S. Geological Survey (USGS) integrated research projects.

  15. Geohydrology and water quality of the North Platte River alluvial aquifer, Garden County, Western Nebraska

    Science.gov (United States)

    Steele, Gregory V.; Cannia, James C.

    1995-01-01

    In 1993, a 3-year study was begun to describe the geohydrology and water quality of the North Platte River alluvial aquifer near Oshkosh, Garden County, Nebraska. The study's objectives are to evaluate the geohydrologic characteristics of the alluvial aquifer and to establish a network of observation wells for long-term monitoring of temporal variations and spatial distributions of nitrate and major-ion concentrations. Monitor wells were installed at 11 sites near Oshkosh. The geohydrology of the aquifer was characterized based on water-level measurements and two short-term aquifer tests. Bimonthly water samples were collected and analyzed for pH, specific conductivity, water temperature, dissolved oxygen, and nutrients that included dissolved nitrate. Concentrations of major ions were defined from analyses of semiannual water samples. Analyses of the geohydrologic and water-quality data indicate that the aquifer is vulnerable to nitrate contamination. These data also show that nitrate concentrations in ground water flowing into and out of the study area are less than the U.S. Environmental Protection Agency's Maximum Concentration Level of 10 milligrams per liter for drinking water. Ground water from Lost Creek Valley may be mixing with ground water in the North Platte River Valley, somewhat moderating nitrate concentrations near Oshkosh.

  16. Geomorphic Classification and Evaluation of Channel Width and Emergent Sandbar Habitat Relations on the Lower Platte River, Nebraska

    Science.gov (United States)

    Elliott, Caroline M.

    2011-01-01

    This report presents a summary of geomorphic characteristics extracted from aerial imagery for three broad segments of the Lower Platte River. This report includes a summary of the longitudinal multivariate classification in Elliott and others (2009) and presents a new analysis of total channel width and habitat variables. Three segments on the lower 102.8 miles of the Lower Platte River are addressed in this report: the Loup River to the Elkhorn River (70 miles long), the Elkhorn River to Salt Creek (6.9 miles long), and Salt Creek to the Missouri River (25.9 miles long). The locations of these segments were determined by the locations of tributaries potentially significant to the hydrology or sediment supply of the Lower Platte River. This report summarizes channel characteristics as mapped from July 2006 aerial imagery including river width, valley width, channel curvature, and in-channel habitat features. In-channel habitat measurements were not made under consistent hydrologic conditions and must be considered general estimates of channel condition in late July 2006. Longitudinal patterns in these features are explored and are summarized in the context of the longitudinal multivariate classification in Elliott and others (2009) for the three Lower Platte River segments. Detailed descriptions of data collection and classification methods are described in Elliott and others (2009). Nesting data for the endangered interior least tern (Sternula antillarum) and threatened piping plover (Charadrius melodus) from 2006 through 2009 are examined within the context of the multivariate classification and Lower Platte River segments. The widest reaches of the Lower Platte River are located in the segment downstream from the Loup River to the Elkhorn River. This segment also has the widest valley and highest degree of braiding of the three segments and many large vegetated islands. The short segment of river between the Elkhorn River and Salt Creek has a fairly low valley

  17. A Concept for a Long Term Hydrologic Observatory in the South Platte River Basin

    Science.gov (United States)

    Ramirez, J. A.

    2004-12-01

    The intersection between: (1) the Rocky Mountains and developments occurring in high altitude fragile environments; (2) the metropolitan areas emerging at the interface of the mountains and the plains; (3) the irrigation occurring along rivers as they break from the mountains and snake across the Great Plains; and (4) the grasslands and the dryland farming that covers the vast amount of the Great Plains, represents a dynamic, complex, highly integrated ecosystem, stretching from Montana and North Dakota to New Mexico and Texas. This swath of land, and the rivers that cross it (headwaters of the Missouri , the Yellowstone, the North Platte , the South Platte, the Arkansas , the Cimarron, the Red and the Pecos Rivers ), represent a significant percentage of the landmass of the United States. Within this large area, besides tremendous increases in population in metropolitan areas, there are new energy developments, old hard rock mining concerns, new recreation developments, irrigation farms selling water to meet urban demands, new in-stream flow programs, struggling rural areas, and continued "mining" of ground water. The corresponding impacts are creating endangered and threatened species conflicts which require new knowledge to fully understand the measures needed to mitigate harmful ecosystem conditions. Within the Rocky Mountain/Great Plains interface, water is limiting and land is plentiful, presenting natural resource managers with a number of unique problems which demand a scale of integrated science not achieved in the past. For example, water is imported into a number of the streams flowing east from the Rocky Mountains. Nitrogen is deposited in pristine watersheds that rise up high in the Rocky Mountains. Cities capture spring runoff in reservoirs to use at a steady rate over the entire year, putting water into river systems normally moving low flows in the winter. Irrigation of both urban landscapes and farm fields may be at a scale that impacts climate

  18. Emergent sandbar dynamics in the lower Platte River in eastern Nebraska: methods and results of pilot study, 2011

    Science.gov (United States)

    Alexander, Jason S.; Schultze, Devin M.; Zelt, Ronald B.

    2013-01-01

    The lower Platte River corridor provides important habitats for two State- and federally listed bird species: the interior least tern (terns; Sternula antillarum athallassos) and the piping plover (plovers; Charadrius melodus). However, many of the natural morphological and hydrological characteristics of the Platte River have been altered substantially by water development, channelization, hydropower operations, and invasive vegetation encroachment, which have decreased the abundance of high-quality nesting and foraging habitat for terns and plovers. The lower Platte River (LPR), defined as 103 miles (mi) of the Platte River between its confluence with the Loup River and its confluence with the Missouri River, has narrowed since the late-19th and early-20th centuries, yet it partially retains many geomorphologic and hydrologic characteristics important to terns and plovers. These birds nest on the sandbars in the river and along shorelines at sand- and gravel-pit lakes in the adjacent valley. The need to balance continued economic, infrastructure, and resource development with the conservation of important physical and aquatic habitat resources requires increased understanding of the physical and biological dynamics of the lower Platte River. Spatially and temporally rich datasets for emergent sandbar habitats are necessary to quantify emergent sandbar dynamics relative to hypothesized controls and stressors. In cooperation with the Lower Platte South Natural Resources District, the U.S. Geological Survey initiated a pilot study of emergent sandbar dynamics along a 22-mi segment of the LPR downstream from its confluence with Salt Creek, near Ashland, Nebraska. The purposes of the study were to: (1) develop methods to rapidly assess sandbar geometries and locations in a wide, sand-bed river, and (2) apply and validate the method to assess emergent sandbar dynamics over three seasons in 2011. An examination of the height of sandbars relative to the local stage of

  19. Predicting the stability of endangered stonecats in the LaPlatte River, Vermont

    Science.gov (United States)

    Puchala, Elizabeth A.; Parrish, Donna; Donovan, Therese M.

    2016-01-01

    Stonecats Noturus flavus in Vermont conform to a rare distribution pattern (as designated by Rabinowitz 1981) because their known distribution within the state is limited to the LaPlatte and Missisquoi rivers. We focused on Stonecats in the LaPlatte River to predict the stability of the population. During 2012–2014, we captured Stonecats via backpack electrofishing; fish were PIT-tagged (>90 mm TL) and marked with visible implant elastomer. Among the 1,671 Stonecats that were captured, 1,252 were PIT-tagged. Only 156 (12%) of the PIT-tagged fish were recaptured, and only 22 of those individuals were recaptured more than once. The Pradel model in Program MARK was used to estimate apparent survival (Φ) and seniority, which were used to derive the rate of population change (λ) for the Stonecat encounter histories we studied. We examined a total of 64 models in our candidate set, with the following covariates: TL at first capture, maximum temperature, season, maximum discharge, and area sampled. Survival estimates were highest in the spring (range of daily Φ = 0.9993–0.9995) and increased with greater TL at first capture. We also estimated increases in capture probability with increasing area sampled. We derived an annual λ of 0.9794, which indicates a slightly decreasing population. However, our λ estimate contained uncertainty that was likely increased due to the low recapture rates. Additional years of data could increase the accuracy of the λ estimate. In the meantime, we have provided insight into Stonecat population parameters that were otherwise unknown.

  20. Future Water Management in the South Platte River Basin: Impacts of Hydraulic Fracturing, Population, Agriculture, and Climate Change in a Semi-Arid Region.

    Science.gov (United States)

    Walker, E. L.; Hogue, T. S.; Anderson, A. M.; Read, L.

    2015-12-01

    In semi-arid basins across the world, the gap between water supply and demand is growing due to climate change, population growth, and shifts in agriculture and unconventional energy development. Water conservation efforts among residential and industrial water users, recycling and reuse techniques and innovative regulatory frameworks for water management strive to mitigate this gap, however, the extent of these strategies are often difficult to quantify and not included in modeling water allocations. Decision support systems (DSS) are purposeful for supporting water managers in making informed decisions when competing demands create the need to optimize water allocation between sectors. One region of particular interest is the semi-arid region of the South Platte River basin in northeastern Colorado, where anthropogenic and climatic effects are expected to increase the gap between water supply and demand in the near future. Specifically, water use in the South Platte is impacted by several high-intensity activities, including unconventional energy development, i.e. hydraulic fracturing, and large withdrawals for agriculture; these demands are in addition to a projected population increase of 100% by 2050. The current work describes the development of a DSS for the South Platte River basin, using the Water Evaluation and Planning system software (WEAP) to explore scenarios of how variation in future water use in the energy, agriculture, and municipal sectors will impact water allocation decisions. Detailed data collected on oil and gas water use in the Niobrara shale play will be utilized to predict future sector use. We also employ downscaled climate projections for the region to quantify the potential range of water availability in the basin under each scenario, and observe whether or not, and to what extent, climate may impact management decisions at the basin level.

  1. Project plan-Surficial geologic mapping and hydrogeologic framework studies in the Greater Platte River Basins (Central Great Plains) in support of ecosystem and climate change research

    Science.gov (United States)

    Berry, Margaret E.; Lundstrom, Scott C.; Slate, Janet L.; Muhs, Daniel R.; Sawyer, David A.; VanSistine, D. Paco

    2011-01-01

    The Greater Platte River Basin area spans a central part of the Midcontinent and Great Plains from the Rocky Mountains on the west to the Missouri River on the east, and is defined to include drainage areas of the Platte, Niobrara, and Republican Rivers, the Rainwater Basin, and other adjoining areas overlying the northern High Plains aquifer. The Greater Platte River Basin contains abundant surficial deposits that were sensitive to, or are reflective of, the climate under which they formed: deposits from multiple glaciations in the mountain headwaters of the North and South Platte Rivers and from continental ice sheets in eastern Nebraska; fluvial terraces (ranging from Tertiary to Holocene in age) along the rivers and streams; vast areas of eolian sand in the Nebraska Sand Hills and other dune fields (recording multiple episodes of dune activity); thick sequences of windblown silt (loess); and sediment deposited in numerous lakes and wetlands. In addition, the Greater Platte River Basin overlies and contributes surface water to the High Plains aquifer, a nationally important groundwater system that underlies parts of eight states and sustains one of the major agricultural areas of the United States. The area also provides critical nesting habitat for birds such as plovers and terns, and roosting habitat for cranes and other migratory birds that travel through the Central Flyway of North America. This broad area, containing fragile ecosystems that could be further threatened by changes in climate and land use, has been identified by the USGS and the University of Nebraska-Lincoln as a region where intensive collaborative research could lead to a better understanding of climate change and what might be done to adapt to or mitigate its adverse effects to ecosystems and to humans. The need for robust data on the geologic framework of ecosystems in the Greater Platte River Basin has been acknowledged in proceedings from the 2008 Climate Change Workshop and in draft

  2. Comparison of two methods for estimating base flow in selected reaches of the South Platte River, Colorado

    Science.gov (United States)

    Capesius, Joseph P.; Arnold, L. Rick

    2012-01-01

    The U.S. Geological Survey, in cooperation with the Colorado Water Conservation Board, compared two methods for estimating base flow in three reaches of the South Platte River between Denver and Kersey, Colorado. The two methods compared in this study are the Mass Balance and the Pilot Point methods. Base-flow estimates made with the two methods were based upon a 54-year period of record (1950 to 2003).

  3. Demographics and movements of least terns and piping plovers in the Central Platte River Valley, Nebraska

    Science.gov (United States)

    Roche, Erin A.; Sherfy, Mark H.; Ring, Megan M.; Shaffer, Terry L.; Anteau, Michael J.; Stucker, Jennifer H.

    2016-08-09

    The Central Platte River Valley provides breeding habitat for a variety of migratory birds, including federally endangered interior least terns (Sternula antillarum; least tern) and threatened piping plovers (Charadrius melodus). Since 2009, researchers have collected demographic data on both species that span their lifecycle (that is, from egg laying through survival of adults). Demographic data were used to estimate vital rates (for example, nest survival, chick survival, and so on) for both species and assess how these vital rates were related to type and age of nesting habitat. Nest survival of both species was unrelated to the age of the site a nest was initiated on. Piping plover chick survival to fledging age was not related to the age of the site it was hatched at, however, the probability of a least tern chick surviving to fledging was higher at older sites. In general there were fewer piping plover nests than least tern nests found at sites created through either the physical construction of a new site or new vegetation management regimes, during 2009–14.Mean daily least tern nest survival was 0.9742 (95-percent confidence interval [CI]: 0.9692–0.9783) and cumulative nest survival was 0.59 (95-percent CI: 0.53–0.65). Mean daily least tern chick survival was 0.9602 (95-percent CI: 0.9515–0.9673) and cumulative survival to fledging was 0.54 (95-percent CI = 0.48–0.61). Annual apparent survival rates were estimated at 0.42 (95-percent CI = 0.22–0.64) for adult least terns nesting in the Central Platte River Valley and an apparent survival rate of 0.14 (95-pecent CI = 0.04–0.41) for juvenile least terns. The number of least tern nests present at sites created during 2009–14 was associated with the age of the site; more least tern nests were associated with older sites. During 2009–14, there were four (less than 1 percent of all chicks marked) least tern chicks hatched from the Central Platte River Valley that were subsequently captured on

  4. Microbial water quality during the northern migration of Sandhill Cranes (Grus canadensis) at the central Platte River, Nebraska

    Science.gov (United States)

    Moser, Matthew T.

    2014-01-01

    The central Platte River is an important resource in Nebraska. Its water flows among multiple channels and supports numerous beneficial uses such as drinking water, irrigation for agriculture, groundwater recharge, and recreational activities. The central Platte River valley is an important stopover for migratory waterfowl and cranes, such as the Whooping (Grus americana) and Sandhill Cranes (Grus canadensis), in their annual northward traversal of the Central Flyway. Waterfowl, cranes, and other migratory birds moving across international and intercontinental borders may provide long-range transportation for any microbial pathogen they harbor, particularly through the spread of feces. Samples were collected weekly in the study reach from three sites (upstream, middle, and downstream from the roosting locations) during the spring of 2009 and 2010. The samples were analyzed for avian influenza, Escherichia coli, Cryptosporidium, Giardia, Campylobacter, and Legionella. Analysis indicates that several types of fecal indicator bacteria and a range of viral, protozoan, and bacterial pathogens were present in Sandhill Crane excreta. These bacteria and pathogens were present at a significantly higher frequency and densities in water and sediments when the Sandhill Cranes were present, particularly during evening roosts within the Platte River environment.

  5. Foraging ecology of least terns and piping plovers nesting on Central Platte River sandpits and sandbars

    Science.gov (United States)

    Sherfy, Mark H.; Anteau, Michael J.; Shaffer, Terry L.; Sovada, Marsha A.; Stucker, Jennifer H.

    2012-01-01

    Federally listed least terns (Sternula antillarum) and piping plovers (Charadrius melodus) nest on riverine sandbars on many major midcontinent river systems. On the Central Platte River, availability of sandbar habitat is limited, and both species nest on excavated sandpits in the river's floodplain. However, the extent to which sandpit-nesting birds use riverine habitats for foraging is unknown. We evaluated use of foraging habitats by least terns and piping plovers by collecting data on movements, behavior, foraging habitat, and productivity. We radiomarked 16 piping plovers and 23 least terns in 2009-2010 and monitored their movements using a network of fixed telemetry dataloggers. Piping plovers were detected primarily by the datalogger located in their nesting sandpit, whereas least terns were more frequently detected on dataloggers outside of the nesting sandpit. Telemetry data and behavioral observations showed that least terns tended to concentrate at the Kearney Canal Diversion Gates, where forage fish were apparently readily available. Fish sampling data suggested that forage fish were more abundant in riverine than in sandpit habitats, and behavioral observations showed that least terns foraged more frequently in riverine than in sandpit habitats. Piping plovers tended to forage in wet substrates along sandpit shorelines, but also used dry substrates and sandpit interior habitats. The greater mobility of least terns makes a wider range of potential foraging habitats available during brood rearing, making them able to exploit concentrations of fish outside the nesting colony. Thus, our data suggest that different spatial scales should be considered in managing nesting and foraging habitat complexes for piping plovers and least terns.

  6. Adaptive management on the central Platte River--science, engineering, and decision analysis to assist in the recovery of four species.

    Science.gov (United States)

    Smith, Chadwin B

    2011-05-01

    Active adaptive management is the centerpiece of a major species recovery program now underway on the central Platte River in Nebraska. The Platte River Recovery Implementation Program initiated on January 1, 2007 and is a joint effort between the states of Colorado, Wyoming, and Nebraska; the U.S. Department of the Interior; waters users; and conservation groups. This program is intended to address issues related to endangered species and loss of habitat along the Platte River in central Nebraska by managing land and water resources and using adaptive management as its science framework. The adaptive management plan provides a systematic process to test hypotheses and apply the information learned to improve management on the ground, and is centered on conceptual models and priority hypotheses that reflect different interpretations of how river processes work and the best approach to meeting key objectives. This framework reveals a shared attempt to use the best available science to implement experiments, learn, and revise management actions accordingly on the Platte River. This paper focuses on the status of adaptive management implementation on the Platte, experimental and habitat design issues, and the use of decision analysis tools to help set objectives and guide decisions.

  7. Depositional and erosional dynamics of emergent sandbars: a case study of the Platte River, Eastern Nebraska.

    Science.gov (United States)

    Alexander, J. S.; Murr, M. L.; McElroy, B. J.

    2016-12-01

    Macroform sandbars (sandbars) are ubiquitous depositional features of sandy, braided rives. Sandbars formed during annual floods stall and emerge during flow recession, splitting flow, and producing the characteristic braiding pattern. Emergent sandbars are crucial components of riverine ecosystems, forming the foundation of the floodplain/braidplain, providing nesting, brooding, and foraging habitat for migratory and endemic animals, and shallow water aquatic habitat along their periphery. In the United States, substantial resources are being expended to recover and expand so-called emergent sandbar habitat (ESH) in large rivers of the Great Plains, where the natural extent and dynamism of ESH has been degraded due to construction of main-channel dams, navigation channels, and/or disruption of the natural hydrologic and sediment regimes. These programs are ultimately aimed at recovery and protection of populations of Federal and State-listed migratory bird species. Despite the importance of ESH, relatively little empirical information describing the natural temporal and spatial dynamics of sandbar geometries, erosion rates, and depositional controls is available for integrating into ecological and river management models. From 2011 to 2014, we monitored the geometry and fate of large emergent sandbars along 160 km of the sandy, braided Platte River in eastern Nebraska, a segment which retains a mostly natural sediment and hydrologic regime. We show that important descriptors of ESH quality, such as sandbar height, scale linearly with increases in flow stage, but the difference in elevation between sandbar height and formative stage also increases with increasing flow stage. Thus, the flood-hazard of natural sandbars may be much higher than current theory suggests. Our monitoring data indicates that emergent sandbars tend to erode within a year after deposition, and that the rate of erosion scales linearly with discharge. Finally, in agreement with previous work

  8. Near-decadal changes in nitrate and pesticide concentrations in the South Platte River alluvial aquifer, 1993-2004

    Science.gov (United States)

    Paschke, S.S.; Schaffrath, K.R.; Mashbum, S.L.

    2008-01-01

    The lower South Platte River basin of Colorado and Nebraska is an area of intense agriculture supported by surface-water diversions from the river and ground-water pumping from a valley-fill alluvial aquifer. Two well networks consisting of 45 wells installed in the South Platte alluvial aquifer were sampled in the early 1990s and again in the early 2000s to examine near-decadal ground-water quality changes in irrigated agricultural areas. Ground-water age generally increases and dissolved-oxygen content decreases with distance along flow paths and with depdi below the water table, and denitrification is an important natural mitigation mechanism for nitrate in downgradient areas. Ground-water travel time from upland areas to the river ranges from 12 to 31 yr on the basis of apparent ground-water ages. Ground-water nitrate concentrations for agricultural land-use wells increased significantly for oxidized samples over the decade, and nitrogen isotope ratios for oxidized samples indicate synthetic fertilizer as the predominant nitrate source. Ground-water concentrations of atrazine, DEA, and prometon decreased significandy. The decrease in pesticide concentrations and a significant increase in the ratio of DEA to atrazine suggest decreases in pesticide concentrations are likely caused by local decreases in application rates and/or degradation processes and that atrazine degradation is promoted by oxidizing conditions. The difference between results for oxidizing and nitrate-reducing conditions indicates redox state is an important variable to consider when evaluating ground-water quality trends for redox-sensitive constituents such as nitrate and pesticides in the South Platte alluvial aquifer. Copyright ?? 2008 by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America. All rights reserved.

  9. Comparison of water consumption in two riparian vegetation communities along the central Platte River, Nebraska, 2008–09 and 2011

    Science.gov (United States)

    Hall, Brent M.; Rus, David L.

    2013-01-01

    The Platte River is a vital natural resource for the people, plants, and animals of Nebraska. A recent study quantified water use by riparian woodlands along central reaches of the Platte River, Nebraska, finding that water use was mainly regulated below maximum predicted levels. A comparative study was launched through a cooperative partnership between the U.S. Geological Survey, the Central Platte Natural Resources District, the Nebraska Department of Natural Resources, and the Nebraska Environmental Trust to compare water use of a riparian woodland with that of a grazed riparian grassland along the central Platte River. This report describes the results of the 3-year study by the U.S. Geological Survey to measure the evapotranspiration (ET) rates in the two riparian vegetation communities. Evapotranspiration was measured during 2008–09 and 2011 using the eddy-covariance method at a riparian woodland near Odessa, hereinafter referred to as the “woodland site,” and a riparian grassland pasture near Elm Creek, hereinafter referred to as the “grassland site.” Overall, annual ET totals at the grassland site were 90 percent of the annual ET measured at the woodland site, with averages of 653 millimeters (mm) and 726 mm, respectively. Evapotranspiration rates were similar at the grassland site and the woodland site during the spring and fall seasons, but at the woodland site ET rates were higher than those of the grassland site during the peak-growth summer months of June through August. These seasonal differences and the slightly lower ET rates at the grassland site were likely the result of differing plant communities, disturbance effects related to grazing and flooding, and climatic differences between the sites. The annual water balance was calculated for each site and indicated that the predominant factors in the water balance at both sites were ET and precipitation. Annual precipitation for the study period ranged from near to above the normal

  10. Cross-section data and pressure transducer location of the South Platte River near Fort Morgan, Colorado, 2017

    Science.gov (United States)

    Kohn, Michael S.

    2017-01-01

    The USGS Colorado Water Science Center, in cooperation with the Colorado Water Conservation Board, collected hydraulic data for the South Platte River for areas adjacent to Fort Morgan, Colo., based on the USGS streamgage 06759500 South Platte River at Fort Morgan, CO. The hydraulic data include survey point data for 54 cross sections and 10 pressure transducers, which are used to record the river stage beginning at Morgan County Road 16 and extending downstream to Morgan County Road 20.5 near Fort Morgan, Colo. The cross-section and pressure transducer location data were collected using real-time kinematic Global Navigation Satellite Systems by USGS personnel from February 15, 2017, through April 18, 2017. These data can be used to develop inundation maps, which could be available to emergency personnel, public officials, and the general public using an online public mapping application at the USGS Flood Inundation Mapper, which contains flood inundation map libraries from throughout the country created by the USGS.

  11. Habitat selection and productivity of least terns on the lower Platte River, Nebraska

    Science.gov (United States)

    Kirsch, Eileen M.

    1996-01-01

    Least terns (Sterna antillarum) were studied on the lower Platte River, Nebraska, where this endangered population nests on natural sandbar habitat and on sandpit sites created by gravel dredging adjacent to the river. Theoretically terns should select habitats according to habitat suitability. However, the introduction of sandpits and conversion of tallgrass prairies along the river banks to agriculture, residential, and wooded areas may have affected terns' abilities to distinguish suitable habitat or the suitability of nesting habitats in general. I examined habitat selection and productivity of least terns to determine if terns selected habitat according to suitability (as indicated by productivity), what factors affected habitat selection and productivity, and if estimated productivity could support this population. Available habitats of both types were characterized and quantified using aerial videography (1989-90), and habitat use was assessed from census data (1987-90). Productivity of adults and causes and correlates of egg and chick mortality were estimated (1987-90). Population trend was assessed with a deterministic model using my estimates of productivity and a range of survival estimates for Laridae reported in the literature. Terns tended to use river sites with large midstream sandbars and a wide channel, and large sandpit sites with large surface areas of water relative to unused sites on both habitats. Number of sites and area of sand available were estimated using discriminant function analysis of variables quantified from video scenes of both habitats. Terns apparently did not use all potentially available sandbar and sandpit sites because discriminant function factor scores for used and unused sites overlapped broadly for both habitats. Terns did not prefer 1 habitat over the other. Although proportions of available sites used were greater on sandpits than on the river, proportions of available sand used did not differ between habitats

  12. Molecular detection of Campylobacter spp. and fecal indicator bacteria during the northern migration of Sandhill Cranes (Grus canadensis) at the Central Platte River

    Science.gov (United States)

    The annual Sandhill crane (Grus canadensis) migration through Nebraska is thought to be a major source of fecal pollution to the Platte River, but of unknown human health risk. To better understand potential risks, the presence of Campylobacter species and fecal bacteria were exa...

  13. Molecular detection of Campylobacter spp. and fecal indicator bacteria during the northern migration of Sandhill Cranes (Grus canadensis) at the Central Platte River

    Science.gov (United States)

    The annual Sandhill crane (Grus canadensis) migration through Nebraska is thought to be a major source of fecal pollution to the Platte River, but of unknown human health risk. To better understand potential risks, the presence of Campylobacter species and fecal bacteria were exa...

  14. Factors affecting post-control reinvasion by seed of an invasive species, Phragmites australis, in the central Platte River, Nebraska.

    Science.gov (United States)

    Galatowitsch, Susan M.; Larson, Diane L.; Larson, Jennifer L.

    2016-01-01

    Invasive plants, such as Phragmites australis, can profoundly affect channel environments of large rivers by stabilizing sediments and altering water flows. Invasive plant removal is considered necessary where restoration of dynamic channels is needed to provide critical habitat for species of conservation concern. However, these programs are widely reported to be inefficient. Post-control reinvasion is frequent, suggesting increased attention is needed to prevent seed regeneration. To develop more effective responses to this invader in the Central Platte River (Nebraska, USA), we investigated several aspects of Phragmites seed ecology potentially linked to post-control reinvasion, in comparison to other common species: extent of viable seed production, importance of water transport, and regeneration responses to hydrology. We observed that although Phragmites seed does not mature until very late in the ice-free season, populations produce significant amounts of viable seed (>50 % of filled seed). Most seed transported via water in the Platte River are invasive perennial species, although Phragmites abundances are much lower than species such as Lythrum salicaria, Cyperus esculentus and Phalaris arundinacea. Seed regeneration of Phragmites varies greatly depending on hydrology, especially timing of water level changes. Flood events coinciding with the beginning of seedling emergence reduced establishment by as much as 59 % compared to flood events that occurred a few weeks later. Results of these investigations suggest that prevention of seed set (i.e., by removal of flowering culms) should be a priority in vegetation stands not being treated annually. After seeds are in the seedbank, preventing reinvasion using prescribed flooding has a low chance of success given that Phragmites can regenerate in a wide variety of hydrologic microsites.

  15. Mapping grassland productivity with 250-m eMODIS NDVI and SSURGO database over the Greater Platte River Basin, USA

    Science.gov (United States)

    Gu, Yingxin; Wylie, Bruce K.; Bliss, Norman B.

    2013-01-01

    This study assessed and described a relationship between satellite-derived growing season averaged Normalized Difference Vegetation Index (NDVI) and annual productivity for grasslands within the Greater Platte River Basin (GPRB) of the United States. We compared growing season averaged NDVI (GSN) with Soil Survey Geographic (SSURGO) database rangeland productivity and flux tower Gross Primary Productivity (GPP) for grassland areas. The GSN was calculated for each of nine years (2000–2008) using the 7-day composite 250-m eMODIS (expedited Moderate Resolution Imaging Spectroradiometer) NDVI data. Strong correlations exist between the nine-year mean GSN (MGSN) and SSURGO annual productivity for grasslands (R2 = 0.74 for approximately 8000 pixels randomly selected from eight homogeneous regions within the GPRB; R2 = 0.96 for the 14 cluster-averaged points). Results also reveal a strong correlation between GSN and flux tower growing season averaged GPP (R2 = 0.71). Finally, we developed an empirical equation to estimate grassland productivity based on the MGSN. Spatially explicit estimates of grassland productivity over the GPRB were generated, which improved the regional consistency of SSURGO grassland productivity data and can help scientists and land managers to better understand the actual biophysical and ecological characteristics of grassland systems in the GPRB. This final estimated grassland production map can also be used as an input for biogeochemical, ecological, and climate change models.

  16. Influence of grazing and available moisture on breeding densities of grassland birds in the central platte river valley, Nebraska

    Science.gov (United States)

    Kim, D.H.; Newton, W.E.; Lingle, G.R.; Chavez-Ramirez, F.

    2008-01-01

    We investigated the relationship between grassland breeding bird densities and both grazing and available moisture in the central Platte River Valley. Nebraska between 1980 and 1996. We also compared species richness and community similarity of breeding birds in sedge (Carex spp.) meadows and mesic grasslands. Densities of two species had a significant relationship with grazing and six of seven focal species had a significant relationship with available moisture. Bobolink (Dolichonyx oryzivorus) and Brown-headed Cowbird (Molothrus ater) densities were lower in grazed plots compared to ungrazed plots, whereas Red-winged Blackbird (Agelaius phoeniceus) densities were greater in sedge-meadow plots compared to mesic grassland plots. Bobolink, Dickcissel (Spiza americana). and Brown-headed Cowbird were negatively associated with available moisture with breeding densities peaking during the driest conditions. Our results suggest that wet conditions increase species richness for the community through addition of wetland-dependant and wetland-associated birds, but decrease densities of ground-nesting grassland birds in wet-meadow habitats, whereas dry conditions reduce species richness but increase the density of the avian assemblage. We propose that wet-meadow habitats serve as local refugia for grassland-nesting birds during local or regional droughts.

  17. Ground-water resources of the South Platte River Basin in western Adams and southwestern Weld Counties, Colorado

    Science.gov (United States)

    Smith, Rex O.; Schneider, P.A.; Petri, Lester R.

    1964-01-01

    The area described in this report consists of about 970 square miles in western Adams and southwestern Weld Counties in northeastern Colorado. It includes that part of the South Platte River valley between Denver and Kuner, Colo., all of Beebe Draw, and the lower part of the valley of Box Elder Creek. The stream-valley lowlands are separated by rolling uplands. The climate is semiarid, the normal annual precipitation being about 13 inches; thus, irrigation is essential for stable agricultural development. The area contains about 220,000 acres of irrigated land in the stream valleys. Most of the remaining 400,000 acres of land is used for dry farming or grazing because it lacks irrigation water. Most of the lowlands were brought under irrigation with surface water during the early 1900's, and now nearly all the surface water in the area is appropriated for irrigation within and downstream from the area. Because the natural flow of the streams is sometimes less than the demand for water, ground water is used to supplement the surface-water supply. Wells, drilled chiefly since 1930, supply the supplemental water and in some places are the sole supply for irrigation use. Rocks exposed in the area are of sedimentary origin and range in age from Lato Cretaceous to Recent. Those that are consolidated, called 'bedrock' in this report, consist of the Fox Hills sandstone and the Laramie and Arapahoe formations, all of Late Cretaceous age, and the Denver formation and Dawson arkose of Late Cretaceous and Tertiary age. The surface of the bedrock was shaped by ancestral streams, the valleys of which are reflected by the present surface topography. Dune sand, slope wash, and thin upland deposits of Quaternary age mantle the bedrock in the divide areas, and stream deposits ranging in thickness from 0 to about 125 feet partly fill the ancestral valleys. The valley-fill deposits consist of beds and lenses of clay, silt, sand, gravel, cobbles, and boulders. Abundant supplies of

  18. Channel Morphology and Bed Sediment Characteristics Before and After Habitat Enhancement Activities in the Uridil Property, Platte River, Nebraska, Water Years 2005-2008

    Science.gov (United States)

    Kinzel, Paul J.

    2009-01-01

    Fluvial geomorphic data were collected by the United States Geological Survey from July 2005 to June 2008 (a time period within water years 2005 to 2008) to monitor the effects of habitat enhancement activities conducted in the Platte River Whooping Crane Maintenance Trust's Uridil Property, located along the Platte River, Nebraska. The activities involved the removal of vegetation and sand from the tops of high permanent islands and the placement of the sand into the active river channel. This strategy was intended to enhance habitat for migratory water birds by lowering the elevations of the high islands, thereby eliminating a visual obstruction for roosting birds. It was also thought that the bare sand on the lowered island surfaces could serve as potential habitat for nesting water birds. Lastly, the project supplied a local source of sediment to the river to test the hypothesis that this material could contribute to the formation of lower sandbars and potential nesting sites downstream. Topographic surveys on the islands and along river transects were used to quantify the volume of removed sand and track the storage and movement of the introduced sand downstream. Sediment samples were also collected to map the spatial distribution of river bed sediment sizes before and after the management activities. While the project lowered the elevation of high islands, observations of the sand addition indicated the relatively fine-grained sand that was placed in the active river channel was rapidly transported by the flowing water. Topographic measurements made 3 months after the sand addition along transects in the area of sediment addition showed net aggradation over measurements made in 2005. In the year following the sand addition, 2007, elevated river flows from local rain events generally were accompanied by net degradation along transects within the area of sediment addition. In the spring of 2008, a large magnitude flow event of approximately 360 cubic meters per

  19. Chapter A. Effects of urbanization on stream ecosystems in the South Platte River basin, Colorado and Wyoming

    Science.gov (United States)

    Sprague, Lori A.; Zuellig, Robert E.; Dupree, Jean A.

    2006-01-01

    This report describes the effects of urbanization on physical, chemical, and biological characteristics of stream ecosystems in 28 basins along an urban land-use gradient in the South Platte River Basin, Colorado and Wyoming, from 2002 through 2003. Study basins were chosen to minimize natural variability among basins due to factors such as geology, elevation, and climate and to maximize coverage of different stages of urban development among basins. Because land use or population density alone often are not a complete measure of urbanization, land use, land cover, infrastructure, and socioeconomic variables were integrated in a multimetric urban intensity index to represent the degree of urban development in each study basin. Physical characteristics studied included stream hydrology, stream temperature, and habitat; chemical characteristics studied included nutrients, pesticides, suspended sediment, sulfate, chloride, and fecal bacteria concentrations; and biological characteristics studied included algae, fish, and invertebrate communities. Semipermeable membrane devices (SPMDs), passive samplers that concentrate trace levels of hydrophobic organic contaminants like polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), also were used. The objectives of the study were to (1) examine physical, chemical, and biological responses along the gradient of urbanization; (2) determine the major physical, chemical, and landscape variables affecting the structure of aquatic communities; and (3) evaluate the relevance of the results to the management of water resources in the South Platte River Basin. Commonly observed effects of urbanization on instream physical, chemical, and biological characteristics, such as increased flashiness, higher magnitude and more frequent peak flows, increased concentrations of chemicals, and changes in aquatic community structure, generally were not observed in this study. None of the hydrologic, temperature, habitat

  20. NDVI saturation adjustment: a new approach for improving cropland performance estimates in the Greater Platte River Basin, USA

    Science.gov (United States)

    Gu, Yingxin; Wylie, Bruce K.; Howard, Daniel M.; Phuyal, Khem P.; Ji, Lei

    2013-01-01

    In this study, we developed a new approach that adjusted normalized difference vegetation index (NDVI) pixel values that were near saturation to better characterize the cropland performance (CP) in the Greater Platte River Basin (GPRB), USA. The relationship between NDVI and the ratio vegetation index (RVI) at high NDVI values was investigated, and an empirical equation for estimating saturation-adjusted NDVI (NDVIsat_adjust) based on RVI was developed. A 10-year (2000–2009) NDVIsat_adjust data set was developed using 250-m 7-day composite historical eMODIS (expedited Moderate Resolution Imaging Spectroradiometer) NDVI data. The growing season averaged NDVI (GSN), which is a proxy for ecosystem performance, was estimated and long-term NDVI non-saturation- and saturation-adjusted cropland performance (CPnon_sat_adjust, CPsat_adjust) maps were produced over the GPRB. The final CP maps were validated using National Agricultural Statistics Service (NASS) crop yield data. The relationship between CPsat_adjust and the NASS average corn yield data (r = 0.78, 113 samples) is stronger than the relationship between CPnon_sat_adjust and the NASS average corn yield data (r = 0.67, 113 samples), indicating that the new CPsat_adjust map reduces the NDVI saturation effects and is in good agreement with the corn yield ground observations. Results demonstrate that the NDVI saturation adjustment approach improves the quality of the original GSN map and better depicts the actual vegetation conditions of the GPRB cropland systems.

  1. Projecting future grassland productivity to assess the sustainability of potential biofuel feedstock areas in the Greater Platte River Basin

    Science.gov (United States)

    Gu, Yingxin; Wylie, Bruce K.; Boyte, Stephen; Phyual, Khem

    2014-01-01

    This study projects future (e.g., 2050 and 2099) grassland productivities in the Greater Platte River Basin (GPRB) using ecosystem performance (EP, a surrogate for measuring ecosystem productivity) models and future climate projections. The EP models developed from a previous study were based on the satellite vegetation index, site geophysical and biophysical features, and weather and climate drivers. The future climate data used in this study were derived from the National Center for Atmospheric Research Community Climate System Model 3.0 ‘SRES A1B’ (a ‘middle’ emissions path). The main objective of this study is to assess the future sustainability of the potential biofuel feedstock areas identified in a previous study. Results show that the potential biofuel feedstock areas (the more mesic eastern part of the GPRB) will remain productive (i.e., aboveground grassland biomass productivity >2750 kg ha−1 year−1) with a slight increasing trend in the future. The spatially averaged EPs for these areas are 3519, 3432, 3557, 3605, 3752, and 3583 kg ha−1 year−1 for current site potential (2000–2008 average), 2020, 2030, 2040, 2050, and 2099, respectively. Therefore, the identified potential biofuel feedstock areas will likely continue to be sustainable for future biofuel development. On the other hand, grasslands identified as having no biofuel potential in the drier western part of the GPRB would be expected to stay unproductive in the future (spatially averaged EPs are 1822, 1691, 1896, 2306, 1994, and 2169 kg ha−1 year−1 for site potential, 2020, 2030, 2040, 2050, and 2099). These areas should continue to be unsuitable for biofuel feedstock development in the future. These future grassland productivity estimation maps can help land managers to understand and adapt to the expected changes in future EP in the GPRB and to assess the future sustainability and feasibility of potential biofuel feedstock areas.

  2. Assessing Hydrologic Impacts of Future Land Cover Change Scenarios in the South Platte River Basin (CO, WY, & NE) and the San Pedro River Basin (U.S./Mexico).

    Science.gov (United States)

    Barlow, J. E.; Burns, I. S.; Guertin, D. P.; Kepner, W. G.; Goodrich, D. C.

    2016-12-01

    Long-term land-use and land cover change and their associated impacts pose critical challenges to sustaining vital hydrological ecosystem services for future generations. In this study, a methodology to characterize hydrologic impacts from future urban growth through time that was developed and applied on the San Pedro River Basin was expanded and utilized on the South Platte River Basin as well. Future urban growth is represented by housing density maps generated in decadal intervals from 2010 to 2100, produced by the U.S. Environmental Protection Agency (EPA) Integrated Climate and Land-Use Scenarios (ICLUS) project. ICLUS developed future housing density maps by adapting the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) social, economic, and demographic storylines to the conterminous United States. To characterize hydrologic impacts from future growth, the housing density maps were reclassified to National Land Cover Database (NLCD) 2006 land cover classes and used to parameterize the Soil and Water Assessment Tool (SWAT) using the Automated Geospatial Watershed Assessment (AGWA) tool. The objectives of this project were to 1) develop and implement a methodology for adapting the ICLUS data for use in AGWA as an approach to evaluate impacts of development on water-quantity and -quality, 2) present, evaluate, and compare results from scenarios for watersheds in two different geographic and climatic regions, 3) determine watershed specific implications of this type of future land cover change analysis.

  3. Chapter A. Effects of urbanization on stream ecosystems in the South Platte River basin, Colorado and Wyoming

    Science.gov (United States)

    Sprague, Lori A.; Zuellig, Robert E.; Dupree, Jean A.

    2006-01-01

    This report describes the effects of urbanization on physical, chemical, and biological characteristics of stream ecosystems in 28 basins along an urban land-use gradient in the South Platte River Basin, Colorado and Wyoming, from 2002 through 2003. Study basins were chosen to minimize natural variability among basins due to factors such as geology, elevation, and climate and to maximize coverage of different stages of urban development among basins. Because land use or population density alone often are not a complete measure of urbanization, land use, land cover, infrastructure, and socioeconomic variables were integrated in a multimetric urban intensity index to represent the degree of urban development in each study basin. Physical characteristics studied included stream hydrology, stream temperature, and habitat; chemical characteristics studied included nutrients, pesticides, suspended sediment, sulfate, chloride, and fecal bacteria concentrations; and biological characteristics studied included algae, fish, and invertebrate communities. Semipermeable membrane devices (SPMDs), passive samplers that concentrate trace levels of hydrophobic organic contaminants like polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), also were used. The objectives of the study were to (1) examine physical, chemical, and biological responses along the gradient of urbanization; (2) determine the major physical, chemical, and landscape variables affecting the structure of aquatic communities; and (3) evaluate the relevance of the results to the management of water resources in the South Platte River Basin. Commonly observed effects of urbanization on instream physical, chemical, and biological characteristics, such as increased flashiness, higher magnitude and more frequent peak flows, increased concentrations of chemicals, and changes in aquatic community structure, generally were not observed in this study. None of the hydrologic, temperature, habitat

  4. 77 FR 52650 - Endangered and Threatened Wildlife and Plants; 12-Month Finding on a Petition To List the Platte...

    Science.gov (United States)

    2012-08-30

    ..., the Platte River caddisfly is considered a shredder and largely feeds upon senescent (aged) plant tissue (Whiles et al. 1999, pp. 542-543). As one of the few shredders present in sloughs, the Platte... shredder species (Roeding and Smock 1989, p. 149), such as the Platte River caddisfly (Vivian 2011, p....

  5. Base Contours of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  6. Base of principal aquifer boundary for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  7. Base of aquifer contour boundary of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  8. Evaluation of groundwater levels in the South Platte River alluvial aquifer, Colorado, 1953-2012, and design of initial well networks for monitoring groundwater levels

    Science.gov (United States)

    Wellman, Tristan

    2015-01-01

    The South Platte River and underlying alluvial aquifer form an important hydrologic resource in northeastern Colorado that provides water to population centers along the Front Range and to agricultural communities across the rural plains. Water is regulated based on seniority of water rights and delivered using a network of administration structures that includes ditches, reservoirs, wells, impacted river sections, and engineered recharge areas. A recent addendum to Colorado water law enacted during 2002-2003 curtailed pumping from thousands of wells that lacked authorized augmentation plans. The restrictions in pumping were hypothesized to increase water storage in the aquifer, causing groundwater to rise near the land surface at some locations. The U.S. Geological Survey (USGS), in cooperation with the Colorado Water Conservation Board and the Colorado Water Institute, completed an assessment of 60 years (yr) of historical groundwater-level records collected from 1953 to 2012 from 1,669 wells. Relations of "high" groundwater levels, defined as depth to water from 0 to 10 feet (ft) below land surface, were compared to precipitation, river discharge, and 36 geographic and administrative attributes to identify natural and human controls in areas with shallow groundwater.

  9. Spring migration ecology of the mid-continent sandhill crane population with an emphasis on use of the Central Platte River Valley, Nebraska

    Science.gov (United States)

    Krapu, Gary L.; Brandt, David A.; Kinzel, Paul J.; Pearse, Aaron T.

    2014-01-01

    We conducted a 10-year study (1998–2007) of the Mid-Continent Population (MCP) of sandhill cranes (Grus canadensis) to identify spring-migration corridors, locations of major stopovers, and migration chronology by crane breeding affiliation (western Alaska–Siberia [WA–S], northern Canada–Nunavut [NC–N], west-central Canada–Alaska [WC–A], and east-central Canada–Minnesota [EC–M]). In the Central Platte River Valley (CPRV) of Nebraska, we evaluated factors influencing staging chronology, food habits, fat storage, and habitat use of sandhill cranes. We compared our findings to results from the Platte River Ecology Study conducted during 1978–1980. We determined spring migration corridors used by the breeding affiliations (designated subpopulations for management purposes) by monitoring 169 cranes marked with platform transmitter terminals (PTTs). We also marked and monitored 456 cranes in the CPRV with very high frequency (VHF) transmitters to evaluate length and pattern of stay, habitat use, and movements. An estimated 42% and 58% of cranes staging in the CPRV were greater sandhill cranes (G. c. tabida) and lesser sandhill cranes (G. c. canadensis), and they stayed for an average of 20 and 25 days (2000–2007), respectively. Cranes from the WA–S, NC–N, WC–A, and EC–M affiliations spent an average of 72, 77, 52, and 53 days, respectively, in spring migration of which 28, 23, 24, and 18 days occurred in the CPRV. The majority of the WA–S subpopulation settled in the CPRV apparently because of inadequate habitat to support more birds upstream, although WA–S cranes accounted for >90% of birds staging in the North Platte River Valley. Crane staging duration in the CPRV was negatively correlated with arrival dates; 92% of cranes stayed >7 days. A program of annual mechanical removal of mature stands of woody growth and seedlings that began in the early 1980s primarily in the main channel of the Platte River has allowed distribution of crane

  10. Evaluation of carbon fluxes and trends (2000-2008) in the Greater Platte River Basin: a sustainability study on the potential biofuel feedstock development

    Science.gov (United States)

    Gu, Yingxin; Wylie, Bruce K.; Zhang, Li; Gilmanov, Tagir G.

    2012-01-01

    This study evaluates the carbon fluxes and trends and examines the environmental sustainability (e.g., carbon budget, source or sink) of the potential biofuel feedstock sites identified in the Greater Platte River Basin (GPRB). A 9-year (2000–2008) time series of net ecosystem production (NEP), a measure of net carbon absorption or emission by ecosystems, was used to assess the historical trends and budgets of carbon flux for grasslands in the GPRB. The spatially averaged annual NEP (ANEP) for grassland areas that are possibly suitable for biofuel expansion (productive grasslands) was 71–169 g C m−2 year−1 during 2000–2008, indicating a carbon sink (more carbon is absorbed than released) in these areas. The spatially averaged ANEP for areas not suitable for biofuel feedstock development (less productive or degraded grasslands) was −47 to 69 g C m−2 year−1 during 2000–2008, showing a weak carbon source or a weak carbon sink (carbon emitted is nearly equal to carbon absorbed). The 9-year pre-harvest cumulative ANEP was 1166 g C m−2 for the suitable areas (a strong carbon sink) and 200 g C m−2 for the non-suitable areas (a weak carbon sink). Results demonstrate and confirm that our method of dynamic modeling of ecosystem performance can successfully identify areas desirable and sustainable for future biofuel feedstock development. This study provides useful information for land managers and decision makers to make optimal land use decisions regarding biofuel feedstock development and sustainability.

  11. Selected Discharge Measurements at Stream-Gaging Stations on Lower Platte River near Ashland, Duncan, Leshara, Louisville, and North Bend, Nebraska, 1934-2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The accompanying "Lower_Platte_GAGES5" data release consists of two parts, a spatial data layer composed of a vector point data set representing five USGS streamflow...

  12. Base of principal aquifer for parts of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Science.gov (United States)

    Hobza, Christopher M.; Abraham, Jared D.; Cannia, James C.; Johnson, Michaela R.; Sibray, Steven S.

    2014-01-01

    Water resources in the North and South Platte River valleys of Nebraska, including the valley of Lodgepole Creek, are critical to the social and economic health of the area, and for the recovery of threatened and endangered species in the Platte River Basin. Groundwater and surface water are heavily used resources, and uses are regulated in the study area. Irrigation is the dominant water use and, in most instances, is supplied by both groundwater and surface-water sources. The U.S. Geological Survey and its partners have collaborated to use airborne geophysical surveys for areas of the North and South Platte River valleys including the valley of Lodgepole Creek in western Nebraska. The objective of the surveys was to map the aquifers and underlying bedrock topography of selected areas to help improve the understanding of groundwater–surface-water relations to guide water-management decisions. This project was a cooperative study involving the North Platte Natural Resources District, the South Platte Natural Resources District, the Twin Platte Natural Resources District, the Conservation and Survey Division of the University of Nebraska-Lincoln, and the Nebraska Environmental Trust. This report presents the interpreted base-of-aquifer surface for part of the area consisting of the North Platte Natural Resources District, the South Platte Natural Resources District, and the Twin Platte Natural Resources District. The interpretations presented herein build on work done by previous researchers from 2008 to 2009 by incorporating additional airborne electromagnetic survey data collected in 2010 and additional test holes from separate, related studies. To make the airborne electromagnetic data useful, numerical inversion was used to convert the measured data into a depth-dependent subsurface resistivity model. An interpretation of the elevation and configuration of the base of aquifer was completed in a geographic information system that provided x, y, and z

  13. Characterization and copper binding of humic and nonhumic organic matter isolated from the South Platte River: Evidence for the presence of nitrogenous binding site

    Science.gov (United States)

    Croue, J.-P.; Benedetti, M.F.; Violleau, D.; Leenheer, J.A.

    2003-01-01

    Humic substances typically constitute 40-60% of the dissolved organic matter (DOM) in surface waters. However, little information is available regarding the metal binding properties of the nonhumic hydrophilic portion of the DOM. In this study, humic and nonhumic DOM samples were isolated from the South Platte River (Colorado, DOC = 2.6 mg??L-1, SUVA254 = 2.4 L/mg??m) using a two-column array of XAD-8 and XAD-4 resins. The three major isolated fractions of DOM, which accounted for 57% of the bulk DOM, were characterized using a variety of analytical tools. Proton and copper binding properties were studied for each fraction. The main objective of this work was to compare the structural and chemical characteristics of the isolated fractions and test models describing DOM reactivity toward metal ions. The characterization work showed significant structural differences between the three isolated fractions of DOM. The hydrophobic acid fraction (i.e., humic substances isolated from the XAD-8 resin) gave the largest C/H, C/O, and C/N ratios and aromatic carbon content among the three isolated fractions. The transphilic acid (TPHA) fraction ("transphilic" meaning fraction of intermediate polarity isolated from the XAD-4 resin) was found to incorporate the highest proportion of polysaccharides, whereas the transphilic neutral (TPHN) fraction was almost entirely proteinaceous. The gradual increase of the charge with pH for the three DOM fractions is most likely caused by a large distribution of proton affinity constants for the carboxylic groups, as well as a second type of group more generally considered to be phenolic. In the case of the DOM fraction enriched in proteinaceous material (i.e., TPHN fraction), the results showed that the amino groups are reponsible for the charge reversal. For low copper concentrations, nitrogen-containing functional groups similar to those of amino acids are likely to be involved in complexation, in agreement with previously published data.

  14. Elevation Control Points to reinterpret the base of aquifer contours after airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  15. Base control points of the aquifer contours enhanced with airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  16. Area of aquifer contours enhanced with airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  17. Base Control Points enhanced with airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  18. Base of aquifer contours model enhanced with airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  19. Base of aquifer contours enhanced with airborne electromagnetic (AEM) surveys of the principal aquifer for portions of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey and its partners have collaborated to complete airborne geophysical surveys for areas of the North and South Platte River valleys and...

  20. Assessing Hydrologic Impacts of Future Land Cover Change Scenarios in the South Platte River Basin (CO, WY, & NE)

    Science.gov (United States)

    Long‐term land‐use and land cover change and their associated impacts pose critical challenges to sustaining vital hydrological ecosystem services for future generations. In this study, a methodology was developed on the San Pedro River Basin to characterize hydrologi...

  1. Assessing Hydrologic Impacts of Future Land Cover Change Scenarios in the South Platte River Basin (CO, WY, & NE)

    Science.gov (United States)

    Long‐term land‐use and land cover change and their associated impacts pose critical challenges to sustaining vital hydrological ecosystem services for future generations. In this study, a methodology was developed on the San Pedro River Basin to characterize hydrologi...

  2. Trend and magnitude of changes in climate variables and reference evapotranspiration over 116-yr period in the Platte River Basin, central Nebraska-USA

    Science.gov (United States)

    Irmak, Suat; Kabenge, Isa; Skaggs, Kari E.; Mutiibwa, Denis

    2012-02-01

    SummarySome studies that investigate the climate change and hydrologic balance relationships utilize reference (potential) evapotranspiration ( ETref) to either calculate the changes in trends and magnitude of actual ET or to determine changes in atmospheric demand. In such cases, it is important to acquire robust ETref estimates to correctly assess the impact of changes in meteorological variables on atmospheric evaporative demand, hydrologic balances, response of vegetation to climate, and their interactions. Despite its crucial importance, unfortunately, ETref is sometimes poorly addressed in climate change studies as some studies utilize temperature or radiation-based empirical equations due to various reasons (unavailability of climate data to solve combination-based energy balance equations, etc.). Since many climate variables that affect ETref rates have been changing and are expected to change in the future, single-variable equations for estimating the trend in ETref should be avoided due to the inherent nature of the trend passed to ETref from the variable. Here, we showed an integrated approach of practical and robust procedures that are already exist to estimate necessary climate variables [incoming shortwave radiation ( R s), net radiation ( R n), wind speed at 2-m ( u2), relative humidity (RH), and vapor pressure deficit (VPD)] only from observed maximum and minimum air temperatures ( Tmax and Tmin) and precipitation ( P) data to be used in Penman-Monteith-type combination-based energy balance equations to predict grass-and alfalfa-reference evapotranspiration ( ET o and ET r, respectively). We analyzed the trends and magnitudes of change in meteorological variables for a 116-yr period from 1893 to 2008 in the agro-ecosystem-dominated Platte River Basin in central Nebraska, USA. Although we found a significant ( P energy, which is primary driver of ETref. There was approximately 100 mm of increase in precipitation from 1893 to 2008 in the study

  3. The Platte River - High Plains Aquifer (PR-HPA) Long Term Agroecosystem Research (LTAR) Network - Data and Technological Resources to Address Current and Emerging Issues in Agroecosystems.

    Science.gov (United States)

    Okalebo, J. A.; Wienhold, B.; Suyker, A.; Erickson, G.; Hayes, M. J.; Awada, T.

    2015-12-01

    The Platte River - High Plains Aquifer (PR-HPA) is one of 18 established Long Term Agroecosystem Research (LTAR) networks across the US. PR-HPA is a partnership between the Institute of Agriculture and Natural Resources at the University of Nebraska-Lincoln (UNL), the USDA-ARS Agroecosystem Management Research Unit (AMRU) in Lincoln, and the USDA-ARS Environmental Management Research Unit (EMRU) in Clay Center, NE. The PR-HPA network encompasses 27,750 ha of research sites with data going back to the early 1900s. A partial list of on-going research projects include those encompassing long-term manuring and continuous corn (Est. 1912), dryland tillage plots (Est. 1970), soil nutrients and tillage (Est. 1983), biofuel feedstock studies (Est. 2001), and carbon sequestration study (Est. 2000). Affiliated partners include the National Drought Mitigation Center (NDMC) that develops measures to improve preparedness and adaptation to climate variability and drought; the High Plains Regional Climate Center (HPRCC) that coordinates data acquisition from over 170 automated weather stations and around 50 automated soil moisture network across NE and beyond; the AMERIFLUX and NEBFLUX networks that coordinate the water vapor and carbon dioxide flux measurements across NE with emphasis on rainfed and irrigated crop lands; the ARS Greenhouse gas Reduction through Agricultural Carbon Enhancement network (GRACEnet) and the Resilient Economic Agricultural Practices (REAP) project; and the Center for Advanced Land Management Information Technologies (CALMIT) that assists with the use of geospatial technologies for agriculture and natural resource applications. Current emphases are on addressing present-day and emerging issues related to profitability and sustainability of agroecosystems. The poster will highlight some of the ongoing and planned efforts in research pertaining to climate variability and change, water sustainability, and ecological and agronomic challenges associated

  4. Occurrence of selected pharmaceutical and non-pharmaceutical compounds, and stable hydrogen and oxygen isotope ratios, in a riverbank filtration study, Platte River, Nebraska, 2001 to 2003, Volume 1

    Science.gov (United States)

    Vogel, J.R.; Verstraeten, Ingrid M.; Coplen, T.B.; Furlong, E.T.; Meyer, M.T.; Barber, L.B.

    2005-01-01

    Although studied extensively in recent years in Europe, the occurrence of endocrine disrupters and other organic wastewater compounds in the environment in the United States is not well documented. To better understand the efficiency of riverbank filtration with respect to endocrine disrupting compounds and to evaluate the use of riverbank filtration as an effective means of drinking-water treatment, a study was conducted during 2001-2003 by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the City of Lincoln, at an established riverbank-filtration well field with horizontal collector wells and vertical wells. This study provides information that will be useful for (1) increased understanding of the processes and factors important in controlling the transport of endocrine disrupters, such as pesticides and pharmaceuticals during riverbank filtration, (2) better understanding of the physical and chemical processes that affect riverbank-filtration efficiency, and (3) managing the water resources of the eastern Platte River Basin. This report presents analytical methods and data collected during the study. Data are presented as generalized statistics and in figures showing temporal variations. Sites from which water-quality samples were collected for this study included wastewater sites (a cattle feedlot lagoon, a hog confinement lagoon, and wastewater-treatment plant effluent), surface-water sites (Platte River, Salt Creek, and Loup Power Canal), ground-water sites (one collector well and three vertical wells), and drinking-water sites (raw and finished). Field water-quality properties were measured in samples from these sites. Pharmaceutical compounds were detected often in the wastewater-treatment plant effluent. Surface and ground water showed low-level concentrations of pharmaceuticals. Finished drinking-water samples did not contain detectable concentrations of pharmaceuticals except for low levels of cotinine and

  5. Metal and organic residues in addled eggs of least terns and piping plovers in the Platte Valley of Nebraska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The concentration of most residues detected in eggs of least terns and piping plovers nesting in the Platte River valley are not a cause for alarm. However, selenium...

  6. Stability analysis on residue pond of the Platte River, Ecuador%厄瓜多尔索普拉多拉宝特河渣场边坡稳定性分析

    Institute of Scientific and Technical Information of China (English)

    顾晶; 王海涛

    2014-01-01

    研究开发快速经济和行之有效的滑坡治理方法与理论,一直是各国滑坡防治研究工作的重点。文章通过对厄瓜多尔索普拉多拉宝特河20#渣场边坡工程地质概况进行分析。依据极限平衡法计算出天然状态下该边坡最小安全系数为3.236。由此,分析出此渣场稳定性较好,边坡稳定。%Research and develop fast, economic and effectual control method and theory of landslide, which has been the focal point of work that various countries have researched al the time. This paper which investigates the deformation mechanism of landslide by analyzing the geological situation of construction of the 20th residue pond of the Platte River, Ecuador. Based on the limit equilibrium method to calculate the minimum safety coefficient of slope under the natural state of 3.236.As a result, the slag is analyzed with the field stability is better, the slope stability.

  7. Geology and ground water in the Platte-Republican Rivers watershed and the Little Blue River basin above Angus, Nebraska, with a section on chemical quality of the ground water

    Science.gov (United States)

    Johnson, C.R.; Brennan, Robert

    1960-01-01

    saturation because the ground water, as it percolates southeastward beneath the area, moves out of the Tertiary and into the Quaternary deposits without apparent hindrance. The water that enters the area as underflow from the west is augmented within the area by water that infiltrates from the land surface. The principal sources of irrigating water are precipitation, seepage from canals and reservoirs, and applied irrigation water. Except for the water withdrawn through wells or discharged by natural processes where valleys have been cut into the zone of saturation, ground water leaves the area as underflow into the Platte River valley on the north, the Blue River drainage basin on the east, or the Republican River valley on the south. Part of the water used for irrigation and watering livestock and all the water used in rural and urban homes, in public buildings, and for industrial purposes is obtained from wells, To date (1952) there is no indication that the supply of ground water is being depleted faster than it is being replenished; instead, studies indicate that greater quantities can be withdrawn without causing an excessive decline of the water table. An increase of ground-water withdrawals to a sustainable maximum, however, will be possible only if the points of withdrawal are scattered fairly uniformly. It is estimated that annual withdrawals per township should not exceed 2,100 acre-feet where infiltrating precipitation is the only source of recharge, or 3,000 acre-feet where other sources of recharge are significant. Although perennial withdrawals of this amount could be sustained indefinitely, they would cause some lowering of the water table and eventually a decrease in the amount of water discharged from the area by natural means. The ground water is of the calcium bicarbonate type. In much of the area it is hard or very hard, and in places it contains excessive amounts of iron. In all other respects the water is chemically suitable for domesti

  8. Land-Use Analysis and Simulated Effects of Land-Use Change and Aggregate Mining on Groundwater Flow in the South Platte River Valley, Brighton to Fort Lupton, Colorado

    Science.gov (United States)

    Arnold, L.R.; Mladinich, C.S.; Langer, W.H.; Daniels, J.S.

    2010-01-01

    Land use in the South Platte River valley between the cities of Brighton and Fort Lupton, Colo., is undergoing change as urban areas expand, and the extent of aggregate mining in the Brighton-Fort Lupton area is increasing as the demand for aggregate grows in response to urban development. To improve understanding of land-use change and the potential effects of land-use change and aggregate mining on groundwater flow, the U.S. Geological Survey, in cooperation with the cities of Brighton and Fort Lupton, analyzed socioeconomic and land-use trends and constructed a numerical groundwater flow model of the South Platte alluvial aquifer in the Brighton-Fort Lupton area. The numerical groundwater flow model was used to simulate (1) steady-state hydrologic effects of predicted land-use conditions in 2020 and 2040, (2) transient cumulative hydrologic effects of the potential extent of reclaimed aggregate pits in 2020 and 2040, (3) transient hydrologic effects of actively dewatered aggregate pits, and (4) effects of different hypothetical pit spacings and configurations on groundwater levels. The SLEUTH (Slope, Land cover, Exclusion, Urbanization, Transportation, and Hillshade) urban-growth modeling program was used to predict the extent of urban area in 2020 and 2040. Wetlands in the Brighton-Fort Lupton area were mapped as part of the study, and mapped wetland locations and areas of riparian herbaceous vegetation previously mapped by the Colorado Division of Wildlife were compared to simulation results to indicate areas where wetlands or riparian herbaceous vegetation might be affected by groundwater-level changes resulting from land-use change or aggregate mining. Analysis of land-use conditions in 1957, 1977, and 2000 indicated that the general distribution of irrigated land and non-irrigated land remained similar from 1957 to 2000, but both land uses decreased as urban area increased. Urban area increased about 165 percent from 1957 to 1977 and about 56 percent from

  9. Hydrology and cycling of nitrogen and phosphorus in Little Bean Marsh : a remnant riparian wetland along the Missouri River in Platte County, Missouri, 1996-97

    Science.gov (United States)

    Blevins, Dale W.

    2004-01-01

    The lack of concurrent water-quality and hydrologic data on riparian wetlands in the Midwestern United States has resulted in a lack of knowledge about the water-quality functions that these wetlands provide. Therefore, Little Bean Marsh, a remnant riparian wetland along the Missouri River, was investigated in 1996 and 1997 primarily to determine the magnitude and character of selected water-quality benefits that can be produced in such a wetland and to identify critical processes that can be managed in remnant or restored riparian wetlands for amelioration of water quality. Little Bean Marsh averages 69 hectares in size, has a maximum depth of about 1 meter, and the majority of the marsh is covered by macrophytes. In 1997, 41 percent of the water received by Little Bean Marsh was from direct precipitation, 14 percent was from ground-water seepage, 30 percent from watershed runoff, and 15 percent was backflow from Bean Lake. Although, Little Bean Marsh was both a ground-water recharge and discharge area, discharge to the marsh was three times the recharge to ground water. Ground-water levels closely tracked marsh water levels indicating a strong hydraulic connection between ground water and the marsh. Reduced surface runoff and ground-water availability are stabilizing influences on marsh hydrology and probably contribute to the persistence of emergent vegetation. The rapid hydraulic connection between Little Bean Marsh and ground water indicates that the hydrologic regime of most wetlands along the lower Missouri River is largely a function of the altitude of the marsh bottom relative to the altitude of the water table. More water was lost from the marsh through evapotranspiration (59 percent) than all other pathways combined. This is partially because the transpiration process of abundant macrophytes can greatly contribute to the evapotranspiration above that lost from open water surfaces. Surface outflow accounted for 36 percent and ground-water seepage

  10. Natural Gas Storage Facilities, US, 2010, Platts

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Platts Natural Gas Storage Facilities geospatial data layer contains points that represent locations of facilities used for natural gas storage in the United...

  11. Assessment of small hydropower potential for the Olanesti River using advanced software techniques

    Science.gov (United States)

    Moldoveanu, A.; Galie, A.; Moldoveanu, M.; Popa, F.; Tica, E.; Popa, B.

    2017-01-01

    The assessment of small hydropower potential for rivers is essential for the Renewable Energy Sources Directive implementation, in order to identify and analyze opportunities for new small hydropower developments. As the Water Framework Directive requirement is the non-deterioration of the status of the river water bodies, the aspects regarding the consistency of a flow regime downstream hydropower plant and the environmental objectives are important. The paper presents a case study, the Olanesti River (Romania), using software techniques dedicated to the assessment of small hydropower potential. The hydropower potential of the river was assessed considering the heads based on the Digital Terrain Model and the mean flow. In addition, the environmental flow was considered for the installed capacity assessment, in order to cope with the Water Framework Directive requirements. The harnessed hydropower potential, the optimal distance between the water intake and power plant location, their optimum positions along the river sector, installed capacity and electricity production, calculated at an average lifetime, are the outcomes of the software. The applicability of the tool might be extended on a regional scale in order to support the decision making authorities, taking into account the increasing demand for energy as well as the environmental issues.

  12. SOFTWARE AND TECHNOLOGIES FOR GEOGRAPHIC INFORMATION SYSTEM OF YENISEI RIVER BASIN

    Directory of Open Access Journals (Sweden)

    A. A. Kadochnikov

    2016-01-01

    Full Text Available The work considers the questions of formation of problem-focused geoinformation system of the Yenisei river basin based on interdisciplinary scientific studies. The creation of a system, in which are collected and systematized information about its river network, will provide an opportunity for analysis and modeling of hydrological processes various natural and man-made phenomena, qualitative and quantitative assessment of water resources, ecological status. Methodological basis of development is a regional system of indicators for sustainable environmental management. Development is created in the service-oriented paradigm on the basis of geoportal technologies, interactive web mapping, distributed storage and data processing. The focus in this article is paid to the problems of software design and technological support, the characteristics of software components implementation of the web GIS, the effective processing and presentation of geospatial data.

  13. Sport hunting decision document package : North Platte National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The U.S. Fish and Wildlife Service proposes limited hunting opportunities at North Platte NWR. Hunting activities will be permitted, but administratively limited to...

  14. Environmental Assessment : Hunting Plan : North Platte National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this Environmental Assessment is to evaluate the feasibility of opening the North Platte National Wildlife Refuge to limited hunting on previously...

  15. [North Platte National Wildlife Refuge Annual narrative report: 1980

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1980 calendar year. The report begins by describing...

  16. North Platte National Wildlife Refuge: Comprehensive Conservation Plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Comprehensive Conservation Plan (CCP) was written to guide management on North Platte NWR for the next 15 years. This plan outlines the Refuge vision and...

  17. Evaluation of the Small Hydropower Potential of River Ethiope Using the RETScreen Software

    Directory of Open Access Journals (Sweden)

    S.O.Otuagoma

    2016-01-01

    Full Text Available :In this study, the River Ethiope was critically studied as a source of renewable energy for small hydropower development. The aim was to carry out detailed evaluation of the river’s hydropower generation potential using RETScreen software.Data on daily flow that was used for flow duration curve was obtained from the Benin Owena River Basin Authority’s hydrological year book for a period of six years (1989 – 1994. Also in this study, meteorological data on rainfall, temperature, wind evaporation and humidity were obtained from the Meteorological Weather Station at the Geography Department, Delta State University, Abraka. These data were used to observe the seasonal variations and how this variation affects the flow rate.RETScreen clean energy analysis software was used for the evaluation of the energy output from the River Ethiope. Four alternative project formulations were evaluated using the RETScreen software. The results of the four alternative project formulations using the RETScreen Software are as follows: Case 1(for a flow rate of Q = 9.6 m3 /s, with a head of 5, 10, 15 and 20 m, the output power P are: 357, 753,1142 and 1,526 kW respectively, Case 2 (for a flow rate of Q = 10.8 m3 /s, with a head of 5,10, 15 and 20 m, the output power P are: 402, 848,1,286, 1,719 kW respectively, Case 3 (for a flow rate of Q = 13.8 m3 /s, with a head of 5, 10, 15 and 20 m, the output power P are: 516, 1,086, 1,646, 2,200 kW respectively, Case 4 ( for a flow rate of Q = 31.73 m3 /s, with a head of 5, 10, 15 and 20 m, the output power P are: 1,195, 2,509, 3,800 and 5,079 kW respectively. The results of the evaluations showed that the River Ethiope is capable of generating 1.20 MW on a design flow of 31.73 m3 /s and a head of 5 m. While on a design flow of 31.73 m3 /s and a head of 15 m, 3.8 MW of electricity could be generated if properly harnessed. It can therefore be concluded that the River Ethiope when fully utilised could generate electric

  18. Magnetic resonance sounding survey data collected in the North Platte, Twin Platte, and South Platte Natural Resource Districts, Western Nebraska, Fall 2012

    Science.gov (United States)

    Kass, Mason A.; Bloss, Benjamin R.; Irons, Trevor P.; Cannia, James C.; Abraham, Jared D.

    2014-01-01

    This report is a release of digital data and associated survey descriptions from a series of magnetic resonance soundings (MRS, also known as surface nuclear magnetic resonance) that was conducted during October and November of 2012 in areas of western Nebraska as part of a cooperative hydrologic study by the North Platte Natural Resource District (NRD), South Platte NRD, Twin Platte NRD, the Nebraska Environmental Trust, and the U.S. Geological Survey (USGS). The objective of the study was to delineate the base-of-aquifer and refine the understanding of the hydrologic properties in the aquifer system. The MRS technique non-invasively measures water content in the subsurface, which makes it a useful tool for hydrologic investigations in the near surface (up to depths of approximately 150 meters). In total, 14 MRS production-level soundings were acquired by the USGS over an area of approximately 10,600 square kilometers. The data are presented here in digital format, along with acquisition information, survey and site descriptions, and metadata.

  19. MATHEMATICAL MODEL FOR THE SIMULATION OF WATER QUALITY IN RIVERS USING THE VENSIM PLE® SOFTWARE

    Directory of Open Access Journals (Sweden)

    Julio Cesar de S. I. Gonçalves

    2013-06-01

    Full Text Available Mathematical modeling of water quality in rivers is an important tool for the planning and management of water resources. Nevertheless, the available models frequently show structural and functional limitations. With the objective of reducing these drawbacks, a new model has been developed to simulate water quality in rivers under unsteady conditions; this model runs on the Vensim PLE® software and can also be operated for steady-state conditions. The following eighteen water quality variables can be simulated: DO, BODc, organic nitrogen (No, ammonia nitrogen (Na, nitrite (Ni, nitrate (Nn, organic and inorganic phosphorus (Fo and Fi, respectively, inorganic solids (Si, phytoplankton (F, zooplankton (Z, bottom algae (A, detritus (D, total coliforms (TC, alkalinity (Al., total inorganic carbon (TIC, pH, and temperature (T. Methane as well as nitrogen and phosphorus compounds that are present in the aerobic and anaerobic layers of the sediment can also be simulated. Several scenarios were generated for computational simulations produced using the new model by using the QUAL2K program, and, when possible, analytical solutions. The results obtained using the new model strongly supported the results from the QUAL family and analytical solutions.

  20. MATHEMATICAL MODEL FOR THE SIMULATION OF WATER QUALITY IN RIVERS USING THE VENSIM PLE® SOFTWARE

    Directory of Open Access Journals (Sweden)

    Julio Cesar de S. I. Gonçalves

    2013-01-01

    Full Text Available Mathematical modeling of water quality in rivers is an important tool for the planning and management of water resources. Nevertheless, the available models frequently show structural and functional limitations. With the objective of reducing these drawbacks, a new model has been developed to simulate water quality in rivers under unsteady conditions; this model runs on the Vensim PLE ® software and can also be operated for steady-state conditions. The following eighteen water quality variables can be simulated: DO, BOD c , organic nitrogen (N o , ammonia nitrogen (N a , nitrite (N i , nitrate (N n , organic and inorganic phosphorus (F o and F i , respectively, inorganic solids (Si, phytoplankton (F, zooplankton (Z, bottom algae (A, detritus (D, total coliforms (TC, alkalinity (Al., total inorganic carbon (TIC, pH, and temperature (T. Methane as well as nitrogen and phosphorus compounds that are present in the aerobic and anaerobic layers of the sediment can also be simulated. Several scenarios were generated for computational simulations produced using the new model by using the QUAL2K program, and, when possible, analytical solutions. The results obtained using the new model strongly supported the results from the QUAL family and analytical solutions.

  1. Ice Jam Flooding and Mitigation: Lower Platte River Basin, Nebraska,

    Science.gov (United States)

    1996-01-01

    Section B [] FREEZEUP Border ice: Growth from shore ft ___ % of channel remaining open Moving ice: Types Li Frazil slush Li Frazil pans (Check all...ice: _ AM/PM mm/dd/yy Post movement: Height of shear walls along bank: ft [] ICE JAMS Cause (check one): L] Freezeup Li Breakup Condition at ice jam...direction). Comments on any aspect of ice quantity, quality, freezeup , breakup, jamming, weather, etc.: CONTACT #1: CONTACT #2: CONTACT #3: (Local

  2. Long-Term Response of Groundwater Nitrate Concentrations to Management Regulations in Nebraska's Central Platte Valley

    Directory of Open Access Journals (Sweden)

    Mary E. Exner

    2010-01-01

    Full Text Available The impact of 16 years (1988–2003 of management practices on high groundwater nitrate concentrations in Nebraska's central Platte River valley was assessed in a 58,812-ha (145,215-ac groundwater quality management area intensively cropped to irrigated corn (Zea mays L.. Crop production and groundwater nitrate data were obtained from ~23,800 producer reports. The terrace, comprising ~56% of the study area, is much more intensively cropped to irrigated corn than the bottomland. From 1987 to 2003, average groundwater nitrate concentrations in the primary aquifer beneath the bottomland remained static at ~8 mg N/l. During the same period, average groundwater nitrate concentrations in the primary aquifer beneath the terrace decreased from 26.4 to 22.0 mg N/l at a slow, but significant (p < 0.0001, rate of 0.26 mg N/l/year. Approximately 20% of the decrease in nitrate concentrations can be attributed to increases in the amount of N removed from fields as a consequence of small annual increases in yield. During the study, producers converted ~15% of the ~28,300 furrow-irrigated terrace hectares (~69,800 ac to sprinkler irrigation. The conversion is associated with about an additional 50% of the decline in the nitrate concentration, and demonstrates the importance of both improved water and N management. Average N fertilizer application rates on the terrace were essentially unchanged during the study. The data indicate that groundwater nitrate concentrations have responded to improved management practices instituted by the Central Platte Natural Resources District.

  3. The Planning Task for Teams (PLATT): An environment for research on planning and decision making in teams

    NARCIS (Netherlands)

    Kamphuis, W.; Houttuin, K.

    2007-01-01

    In this report, we introduce a newly developed task environment for experimental team research: the Planning Task for Teams (PLATT). PLATT is a scenario based, computerized, complex planning task for three-person teams. PLATT has been designed to be able to do experimental laboratory research on

  4. The Planning Task for Teams (PLATT): An environment for research on planning and decision making in teams

    NARCIS (Netherlands)

    Kamphuis, W.; Houttuin, K.

    2007-01-01

    In this report, we introduce a newly developed task environment for experimental team research: the Planning Task for Teams (PLATT). PLATT is a scenario based, computerized, complex planning task for three-person teams. PLATT has been designed to be able to do experimental laboratory research on com

  5. Simulation of groundwater flow and analysis of the effects of water-management options in the North Platte Natural Resources District, Nebraska

    Science.gov (United States)

    Peterson, Steven M.; Flynn, Amanda T.; Vrabel, Joseph; Ryter, Derek W.

    2015-08-12

    The North Platte Natural Resources District (NPNRD) has been actively collecting data and studying groundwater resources because of concerns about the future availability of the highly inter-connected surface-water and groundwater resources. This report, prepared by the U.S. Geological Survey in cooperation with the North Platte Natural Resources District, describes a groundwater-flow model of the North Platte River valley from Bridgeport, Nebraska, extending west to 6 miles into Wyoming. The model was built to improve the understanding of the interaction of surface-water and groundwater resources, and as an optimization tool, the model is able to analyze the effects of water-management options on the simulated stream base flow of the North Platte River. The groundwater system and related sources and sinks of water were simulated using a newton formulation of the U.S. Geological Survey modular three-dimensional groundwater model, referred to as MODFLOW–NWT, which provided an improved ability to solve nonlinear unconfined aquifer simulations with wetting and drying of cells. Using previously published aquifer-base-altitude contours in conjunction with newer test-hole and geophysical data, a new base-of-aquifer altitude map was generated because of the strong effect of the aquifer-base topography on groundwater-flow direction and magnitude. The largest inflow to groundwater is recharge originating from water leaking from canals, which is much larger than recharge originating from infiltration of precipitation. The largest component of groundwater discharge from the study area is to the North Platte River and its tributaries, with smaller amounts of discharge to evapotranspiration and groundwater withdrawals for irrigation. Recharge from infiltration of precipitation was estimated with a daily soil-water-balance model. Annual recharge from canal seepage was estimated using available records from the Bureau of Reclamation and then modified with canal

  6. ANALYSIS OF EROSION AND SEDIMENTATION PATTERNS USING SOFTWARE OF MIKE 21 HDFM-MT IN THE KAPUAS MURUNG RIVER MOUTH CENTRAL KALIMANTAN PROVINCE

    Directory of Open Access Journals (Sweden)

    Franto Novico

    2017-07-01

    Full Text Available The public transportation system along the Kapuas River, Central Kalimantan are highly depend on water transportation. Natural condition gives high distribution to the smoothness of the vessel traffic along the Kapuas Murung River. The local government has planned to build specific port for stock pile at the Batanjung which would face with natural phenomena of sedimentation and erosion at a river mouth. Erosion and sedimentation could be predicted not only by field observing but it is also needed hypotheses using software analysis. Hydrodynamics and transport sediment models by Mike 21 HDFM-MT software will be applied to describe the position of sedimentations and erosions at a river mouth. Model is assumed by two different river conditions, wet and dry seasons. Based on two types of conditions the model would also describe the river flow and sediment transport at spring and neap periods. Tidal fluctuations and a river current as field observation data would be verified with the result of model simulations. Based on field observation and simulation results could be known the verification of tidal has an 89.74% correlation while the river current correlation has 43.6%. Moreover, based on the simulation the sediment patterns in flood period have a larger area than ebb period. Furthermore, the erosion patterns dominantly occur during wet and dry season within ebb period. Water depths and sediment patterns should be considered by the vessels that will use the navigation channel at a river mouth.

  7. Crescent Lake/North Platte National Wildlife Refuge Complex annual habitat management plan

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Crescent Lake/North Platte National Wildlife Refuge Complex Annual Habitat Management Plan provides a year long vision and specific guidance on managing habitats...

  8. Final Environmental Assessment : Recreation management on the Lake Minatare Unit, North Platte National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of this Environmental Assessment is to evaluate the feasibility of removing portions of the North Platte National Wildlife Refuge from the National...

  9. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 1999

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1999 calendar year. The report...

  10. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 1994

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1994 calendar year. The report...

  11. Survey of reptiles and amphibians of North Platte National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This proposal is for surveying reptiles and amphibians of North Platte National Wildlife Refuge for the specific goals of generating a species list, species...

  12. Summary of Activities, Crescent Lake and North Platte Refuges : May 1938

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This narrative report for Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge outlines Refuge accomplishments for May of 1938. The...

  13. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 1995

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1995 calendar year. The report...

  14. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 2000

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2000 calendar year. The report...

  15. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 1996

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1996 calendar year. The report...

  16. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual narrative report: Calendar year 2001

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2001 calendar year. The report...

  17. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual Narrative Report: Calendar Year 2004

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2004 calendar year. The report...

  18. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual Narrative Report: Calendar Year 2002

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2002 calendar year. The report...

  19. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual Narrative Report: Calendar Year 2005

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2005 calendar year. The report...

  20. Crescent Lake/North Platte National Wildlife Refuge Complex: Annual Narrative Report: Calendar Year 2003

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 2003 calendar year. The report...

  1. Narrative report North Platte Refuge: May, June, July, and August, 1943

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This narrative report for North Platte National Wildlife Refuge outlines Refuge accomplishments from May through August of 1943. The report begins by summarizing the...

  2. Software and system development using virtual platforms full-system simulation with wind river simics

    CERN Document Server

    Aarno, Daniel

    2014-01-01

    Virtual platforms are finding widespread use in both pre- and post-silicon computer software and system development. They reduce time to market, improve system quality, make development more efficient, and enable truly concurrent hardware/software design and bring-up. Virtual platforms increase productivity with unparalleled inspection, configuration, and injection capabilities. In combination with other types of simulators, they provide full-system simulations where computer systems can be tested together with the environment in which they operate. This book is not only about what simulat

  3. The international river interface cooperative: Public domain flow and morphodynamics software for education and applications

    Science.gov (United States)

    Nelson, Jonathan M.; Shimizu, Yasuyuki; Abe, Takaaki; Asahi, Kazutake; Gamou, Mineyuki; Inoue, Takuya; Iwasaki, Toshiki; Kakinuma, Takaharu; Kawamura, Satomi; Kimura, Ichiro; Kyuka, Tomoko; McDonald, Richard R.; Nabi, Mohamed; Nakatsugawa, Makoto; Simões, Francisco R.; Takebayashi, Hiroshi; Watanabe, Yasunori

    2016-07-01

    This paper describes a new, public-domain interface for modeling flow, sediment transport and morphodynamics in rivers and other geophysical flows. The interface is named after the International River Interface Cooperative (iRIC), the group that constructed the interface and many of the current solvers included in iRIC. The interface is entirely free to any user and currently houses thirteen models ranging from simple one-dimensional models through three-dimensional large-eddy simulation models. Solvers are only loosely coupled to the interface so it is straightforward to modify existing solvers or to introduce other solvers into the system. Six of the most widely-used solvers are described in detail including example calculations to serve as an aid for users choosing what approach might be most appropriate for their own applications. The example calculations range from practical computations of bed evolution in natural rivers to highly detailed predictions of the development of small-scale bedforms on an initially flat bed. The remaining solvers are also briefly described. Although the focus of most solvers is coupled flow and morphodynamics, several of the solvers are also specifically aimed at providing flood inundation predictions over large spatial domains. Potential users can download the application, solvers, manuals, and educational materials including detailed tutorials at www.-i-ric.org. The iRIC development group encourages scientists and engineers to use the tool and to consider adding their own methods to the iRIC suite of tools.

  4. The international river interface cooperative: Public domain flow and morphodynamics software for education and applications

    Science.gov (United States)

    Nelson, Jonathan M.; Shimizu, Yasuyuki; Abe, Takaaki; Asahi, Kazutake; Gamou, Mineyuki; Inoue, Takuya; Iwasaki, Toshiki; Kakinuma, Takaharu; Kawamura, Satomi; Kimura, Ichiro; Kyuka, Tomoko; McDonald, Richard R.; Nabi, Mohamed; Nakatsugawa, Makoto; Simoes, Francisco J.; Takebayashi, Hiroshi; Watanabe, Yasunori

    2016-01-01

    This paper describes a new, public-domain interface for modeling flow, sediment transport and morphodynamics in rivers and other geophysical flows. The interface is named after the International River Interface Cooperative (iRIC), the group that constructed the interface and many of the current solvers included in iRIC. The interface is entirely free to any user and currently houses thirteen models ranging from simple one-dimensional models through three-dimensional large-eddy simulation models. Solvers are only loosely coupled to the interface so it is straightforward to modify existing solvers or to introduce other solvers into the system. Six of the most widely-used solvers are described in detail including example calculations to serve as an aid for users choosing what approach might be most appropriate for their own applications. The example calculations range from practical computations of bed evolution in natural rivers to highly detailed predictions of the development of small-scale bedforms on an initially flat bed. The remaining solvers are also briefly described. Although the focus of most solvers is coupled flow and morphodynamics, several of the solvers are also specifically aimed at providing flood inundation predictions over large spatial domains. Potential users can download the application, solvers, manuals, and educational materials including detailed tutorials at www.-i-ric.org. The iRIC development group encourages scientists and engineers to use the tool and to consider adding their own methods to the iRIC suite of tools.

  5. Continental and oceanographic data information system, codis version 1.0: Protocols, software, compilation and appraisal of meta-data of organic contaminants in the Fraser River basin

    Energy Technology Data Exchange (ETDEWEB)

    Fyles, T.M.; King, B.; West, P.R.

    1993-12-31

    Description of the continental and oceanographic data information system (CODIS), a PC-based index that searches, reports, and maps information on organic contaminants in the Fraser River Basin. The report also documents the historical development of CODIS, the protocol used to evaluate the quality of the organic data, and the software development and cataloguing process used for inputting the data.

  6. TREHS (Temporary Rivers Ecological and Hydrological Status): new software for investigating the degree of hydrologic alteration of temporary streams.

    Science.gov (United States)

    Gallart, Francesc; Llorens, Pilar; Cid, Núria; latron, Jérôme; Bonada, Núria; Prat, Narcís

    2017-04-01

    individuals, and by interpretation of aerial photographs. Up to six metrics defining the permanence of water flow, the presence of stagnant pools and their temporal patterns of occurrence are used to determine the natural and observed river regime, and to assess the degree of hydrological alteration. Here, given the lack of agreed standards to evaluate the ecological relevance of the observed alterations, the thresholds that define quality class boundaries are provisional and may be updated using expert knowledge. Finally, the software characterizes the differences between the natural and actual regimes, performs a diagnosis of the hydrological status (degree of hydrologic alteration) along with an assessment of the significance and robustness of the diagnosis, and recommends the best period for biological quality samplings.

  7. Advanced Tools for River Science: EAARL and MD_SWMS: Chapter 3

    Science.gov (United States)

    Kinzel, Paul J.

    2009-01-01

    Disruption of flow regimes and sediment supplies, induced by anthropogenic or climatic factors, can produce dramatic alterations in river form, vegetation patterns, and associated habitat conditions. To improve habitat in these fluvial systems, resource managers may choose from a variety of treatments including flow and/or sediment prescriptions, vegetation management, or engineered approaches. Monitoring protocols developed to assess the morphologic response of these treatments require techniques that can measure topographic changes above and below the water surface efficiently, accurately, and in a standardized, cost-effective manner. Similarly, modeling of flow, sediment transport, habitat, and channel evolution requires characterization of river morphology for model input and verification. Recent developments by the U.S. Geological Survey with regard to both remotely sensed methods (the Experimental Advanced Airborne Research LiDAR; EAARL) and computational modeling software (the Multi-Dimensional Surface-Water Modeling System; MD_SWMS) have produced advanced tools for spatially explicit monitoring and modeling in aquatic environments. In this paper, we present a pilot study conducted along the Platte River, Nebraska, that demonstrates the combined use of these river science tools.

  8. Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge annual narrative report: Calendar year 1989

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1989 calendar year. The report...

  9. Assessment of selenium and atrazine exposure and effects to wildlife at the North Platte National Wildlife Refuge, Scottsbluff, Nebraska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This study evaluated selenium and atrazine exposure and effects to fish and wildlife at North Platte National Wildlife Refuge (Refuge) in Scotts Bluff County,...

  10. Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge annual narrative report: Calendar year 1991

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1991 calendar year. The report...

  11. Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge Annual narrative report: Calendar year 1983

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1983 calendar year. The report...

  12. Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge annual narrative report: Calendar year 1990

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1990 calendar year. The report...

  13. Crescent Lake National Wildlife Refuge and North Platte National Wildlife Refuge annual narrative report: Calendar year 1992

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Crescent Lake and North Platte National Wildlife Refuge outlines Refuge accomplishments during the 1992 calendar year. The report...

  14. Geological report on water conditions at Platt National Park, Oklahoma

    Science.gov (United States)

    Gould, Charles Newton; Schoff, Stuart Leeson

    1939-01-01

    Platt National Park, located in southern Oklahoma, containing 842 acres, was established by Acts of Congress in 1902, 1904, and 1906. The reason for the setting aside of this area was the presence in the area of some 30 'mineral' springs, the water from which contains sulphur, bromide, salt, and other minerals, which are believed to possess medicinal qualities. For many generations the sulphur springs of the Chickasaw Nation had been known for their reputed healing qualities. It had long been the custom for families to come from considerable distances on horseback and in wagons and camp near the springs, in order to drink the water. In course of time a primitive town, known as Sulphur Springs, grew up near a group of springs known since as Pavilion Springs at the mouth of Sulphur Creek, now known as Travertine Creek. This town was still in existence at the time of my first visit to the locality in July, 1901. At this time, in company with Joseph A. Taff, of the United States Geological Survey, I spent a week riding over the country making a preliminary survey looking toward the setting aside of the area for a National Park. After the establishment of the National Park, the old town of Sulphur Springs was abandoned, and when the present boundaries of the park had been established the present town of Sulphur, now county seat of Murray County, grew up. In July 1906, on request of Superintendent Joseph F. Swords, I visited the park and made an examination of the various springs and submitted a report, dated August 15, 1906, to Secretary of the Interior E.A. Hitchcock. Copies of this report are on file in the Regional Office and at Platt National Park. In this report I set forth the approximate amount of flow of the various springs, the character of the water in each, and the conditions of the springs as of that date. I also made certain recommendations regarding proposed improvements of each spring. In this report I say: 'In the town of Sulphur, four wells have been

  15. TREHS: An open-access software tool for investigating and evaluating temporary river regimes as a first step for their ecological status assessment.

    Science.gov (United States)

    Gallart, Francesc; Cid, Núria; Latron, Jérôme; Llorens, Pilar; Bonada, Núria; Jeuffroy, Justin; Jiménez-Argudo, Sara-María; Vega, Rosa-María; Solà, Carolina; Soria, Maria; Bardina, Mònica; Hernández-Casahuga, Antoni-Josep; Fidalgo, Aránzazu; Estrela, Teodoro; Munné, Antoni; Prat, Narcís

    2017-12-31

    When the regime of a river is not perennial, there are four main difficulties with the use of hydrographs for assessing hydrological alteration: i) the main hydrological features relevant for biological communities are not quantitative (discharges) but qualitative (phases such as flowing water, stagnant pools or lack of surface water), ii) stream flow records do not inform on the temporal occurrence of stagnant pools, iii) as most of the temporary streams are ungauged, their regime has to be evaluated by alternative methods such as remote sensing or citizen science, and iv) the biological quality assessment of the ecological status of a temporary stream must follow a sampling schedule and references adapted to the flow- pool-dry regime. To overcome these challenges within an operational approach, the freely available software tool TREHS has been developed within the EU LIFE TRIVERS project. This software permits the input of information from flow simulations obtained with any rainfall-runoff model (to set an unimpacted reference stream regime) and compares this with the information obtained from flow gauging records (if available) and interviews with local people, as well as instantaneous observations by individuals and interpretation of ground-level or aerial photographs. Up to six metrics defining the permanence of water flow, the presence of stagnant pools and their temporal patterns of occurrence are used to determine natural and observed river regimes and to assess the degree of hydrological alteration. A new regime classification specifically designed for temporary rivers was developed using the metrics that measure the relative permanence of the three main phases: flow, disconnected pools and dry stream bed. Finally, the software characterizes the differences between the natural and actual regimes, diagnoses the hydrological status (degree of hydrological alteration), assesses the significance and robustness of the diagnosis and recommends the best periods

  16. [On the identification of the species Griphobilharzia amoena Platt, Blair, Purdie et Melville, 1991, a parasite of crocodiles in Australia].

    Science.gov (United States)

    Azimov, D A; Filimonova, L V; Shakabroev, É B; Akramova, F D

    2011-01-01

    The results of the study of typical specimens of the trematode G. amoena from blood vessels of the crocodile Crocodylus johnstoni in Australia are provided. The data obtained on the morphology of this parasite did not confirm the statement of Platt et al. (1991) that this species belongs to the family Schistosomatidae. Morphological data on G. amoena enable attributing it to the genus Vasotrema of the family Spirorchidae as a new species. In this connection, the monotypical genus Griphobilharzia (justified by Platt et al., 1991) becomes a synonym of the genus Vasotrema, while the subfamily Griphobilharziinae becomes a synonym of the subfamily Hapalotrematinae.

  17. A Decade Remote Sensing River Bathymetry with the Experimental Advanced Airborne Research LiDAR

    Science.gov (United States)

    Kinzel, P. J.; Legleiter, C. J.; Nelson, J. M.; Skinner, K.

    2012-12-01

    Since 2002, the first generation of the Experimental Advanced Airborne Research LiDAR (EAARL-A) sensor has been deployed for mapping rivers and streams. We present and summarize the results of comparisons between ground truth surveys and bathymetry collected by the EAARL-A sensor in a suite of rivers across the United States. These comparisons include reaches on the Platte River (NE), Boise and Deadwood Rivers (ID), Blue and Colorado Rivers (CO), Klamath and Trinity Rivers (CA), and the Shenandoah River (VA). In addition to diverse channel morphologies (braided, single thread, and meandering) these rivers possess a variety of substrates (sand, gravel, and bedrock) and a wide range of optical characteristics which influence the attenuation and scattering of laser energy through the water column. Root mean square errors between ground truth elevations and those measured by the EAARL-A ranged from 0.15-m in rivers with relatively low turbidity and highly reflective sandy bottoms to over 0.5-m in turbid rivers with less reflective substrates. Mapping accuracy with the EAARL-A has proved challenging in pools where bottom returns are either absent in waveforms or are of such low intensity that they are treated as noise by waveform processing algorithms. Resolving bathymetry in shallow depths where near surface and bottom returns are typically convolved also presents difficulties for waveform processing routines. The results of these evaluations provide an empirical framework to discuss the capabilities and limitations of the EAARL-A sensor as well as previous generations of post-processing software for extracting bathymetry from complex waveforms. These experiences and field studies not only provide benchmarks for the evaluation of the next generation of bathymetric LiDARs for use in river mapping, but also highlight the importance of developing and standardizing more rigorous methods to characterize substrate reflectance and in-situ optical properties at study sites

  18. Pipe dream? Envisioning a grassroots Python ecosystem of open, common software tools and data access in support of river and coastal biogeochemical research (Invited)

    Science.gov (United States)

    Mayorga, E.

    2013-12-01

    Practical, problem oriented software developed by scientists and graduate students in domains lacking a strong software development tradition is often balkanized into the scripting environments provided by dominant, typically proprietary tools. In environmental fields, these tools include ArcGIS, Matlab, SAS, Excel and others, and are often constrained to specific operating systems. While this situation is the outcome of rational choices, it limits the dissemination of useful tools and their integration into loosely coupled frameworks that can meet wider needs and be developed organically by groups addressing their own needs. Open-source dynamic languages offer the advantages of an accessible programming syntax, a wealth of pre-existing libraries, multi-platform access, linkage to community libraries developed in lower level languages such as C or FORTRAN, and access to web service infrastructure. Python in particular has seen a large and increasing uptake in scientific communities, as evidenced by the continued growth of the annual SciPy conference. Ecosystems with distinctive physical structures and organization, and mechanistic processes that are well characterized, are both factors that have often led to the grass-roots development of useful code meeting the needs of a range of communities. In aquatic applications, examples include river and watershed analysis tools (River Tools, Taudem, etc), and geochemical modules such as CO2SYS, PHREEQ and LOADEST. I will review the state of affairs and explore the potential offered by a Python tool ecosystem in supporting aquatic biogeochemistry and water quality research. This potential is multi-faceted and broadly involves accessibility to lone grad students, access to a wide community of programmers and problem solvers via online resources such as StackExchange, and opportunities to leverage broader cyberinfrastructure efforts and tools, including those from widely different domains. Collaborative development of such

  19. Environmental Assessment for the Bear Creek Dam and Lake Project Master Plan, South Platte River, Colorado

    Science.gov (United States)

    2012-09-01

    offers easy access to nearby scenic attractions including Bandimere Speedway, Red Rocks Park and Amphitheatre, Dinosaur Ridge, William F. Hayden Park on...access to nearby scenic attractions including Bandimere Speedway, Red Rocks Park and Amphitheatre, Dinosaur Ridge, William F. Hayden Park on Green

  20. SOCIAL-ECOLOGICAL RESILIENCE AND LAW IN THE PLATTE RIVER BASIN

    Science.gov (United States)

    Efficiency and resistance to rapid change are hallmarks of both the judicial and legislative branches of the United States government. These defining characteristics, while bringing stability and predictability, pose challenges when it comes to managing dynamic natural systems. A...

  1. SOCIAL-ECOLOGICAL RESILIENCE AND LAW IN THE PLATTE RIVER BASIN

    Science.gov (United States)

    Efficiency and resistance to rapid change are hallmarks of both the judicial and legislative branches of the United States government. These defining characteristics, while bringing stability and predictability, pose challenges when it comes to managing dynamic natural systems. A...

  2. River

    Directory of Open Access Journals (Sweden)

    Morel Mathieu

    2016-01-01

    Full Text Available The OECD report “Boosting Resilience through Innovative Risk Governance” examines the efforts of OECD countries to prevent or reduce future disaster impacts, and highlights several key areas where improvements can be made. International collaboration is insufficiently utilised to address shocks that have increasingly global consequences. Institutional design plays a significant role in facilitating or hampering the engagement and investments of governmental and non-governmental stakeholders in disaster risk prevention and mitigation. To inform the design of “better” institutions, the OECD proposes the application of a diagnostic framework that helps governments identify institutional shortcomings and take actions to improve them. The goal of the case study on the Rhone River is to conduct an analysis of the progress, achievements and existing challenges in designing and implementing disaster risk reduction strategies through the Rhone Plan from a comparative perspective across a set of selected countries of this study, like Austria and Switzerland, will inform how to improve institutional frameworks governing risk prevention and mitigation. The case study will be used to identify examples of successful practice taking into account their specific country contexts, and analyse their potential for policy transfer.

  3. "We Were Beet Workers, and that Was All": Beet Field Laborers in the North Platte Valley, 1902-1930

    Science.gov (United States)

    Kipp, Dustin

    2011-01-01

    The experiences of the men, women, and children who labored in the beet fields of the North Platte Valley changed significantly as the sugar beet industry went through a period of rapid expansion prior to 1920 and then reached a relatively stable plateau. During the period of expansion, laborers were attracted by promises of reasonable wages, good…

  4. "We Were Beet Workers, and that Was All": Beet Field Laborers in the North Platte Valley, 1902-1930

    Science.gov (United States)

    Kipp, Dustin

    2011-01-01

    The experiences of the men, women, and children who labored in the beet fields of the North Platte Valley changed significantly as the sugar beet industry went through a period of rapid expansion prior to 1920 and then reached a relatively stable plateau. During the period of expansion, laborers were attracted by promises of reasonable wages, good…

  5. In situ quantification of spatial and temporal variability of hyporheic exchange in static and mobile gravel-bed rivers

    Science.gov (United States)

    Rosenberry, Donald O.; Klos, P. Zion; Neal, Andrew

    2012-01-01

    Seepage meters modified for use in flowing water were used to directly measure rates of exchange between surface and subsurface water in a gravel- and cobble bed river in western Pennsylvania, USA (Allegheny River, Q mean = 190 m 3/s) and a sand- and gravel-bed river in Colorado, USA (South Platte River, Q mean = 9??7 m 3/s). Study reaches at the Allegheny River were located downstream from a dam. The bed was stable with moss, algae, and river grass present in many locations. Median seepage was + 0??28 m/d and seepage was highly variable among measurement locations. Upward and downward seepage greatly exceeded the median seepage rate, ranging from + 2??26 (upward) to - 3??76 (downward) m/d. At the South Platte River site, substantial local-scale bed topography as well as mobile bedforms resulted in spatial and temporal variability in seepage greatly in exceedence of the median groundwater discharge rate of 0??24 m/d. Both upward and downward seepage were recorded along every transect across the river with rates ranging from + 2??37 to - 3??40 m/d. Despite a stable bed, which commonly facilitates clogging by fine-grained or organic sediments, seepage rates at the Allegheny River were not reduced relative to those at the South Platte River. Seepage rate and direction depended primarily on measurement position relative to local- and meso-scale bed topography at both rivers. Hydraulic gradients were small at nearly all seepage-measurement locations and commonly were not a good indicator of seepage rate or direction. Therefore, measuring hydraulic gradient and hydraulic conductivity at in-stream piezometers may be misleading if used to determine seepage flux across the sediment-water interface. Such a method assumes that flow between the well screen and sediment-water interface is vertical, which appears to be a poor assumption in coarse-grained hyporheic settings.

  6. Radionuclide observables for the Platte underground nuclear explosive test on 14 April 1962.

    Science.gov (United States)

    Burnett, Jonathan L; Milbrath, Brian D

    2016-11-01

    Past nuclear weapon explosive tests provide invaluable information for understanding the radionuclide observables expected during an On-site Inspection (OSI) for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These radioactive signatures are complex and subject to spatial and temporal variability. The Platte underground nuclear explosive test on 14 April 1962 provides extensive environmental monitoring data that can be modelled and used to calculate the maximum time available for detection of the OSI-relevant radionuclides. The 1.6 kT test is especially useful as it released the highest amounts of recorded activity during Operation Nougat at the Nevada Test Site - now known as the Nevada National Security Site (NNSS). It has been estimated that 0.36% of the activity was released, and dispersed in a northerly direction. The deposition ranged from 1 × 10(-11) to 1 × 10(-9) of the atmospheric release (per m(2)), and has been used in this paper to evaluate an OSI and the OSI-relevant radionuclides at 1 week to 2 years post-detonation. Radioactive decay reduces the activity of the OSI-relevant radionuclides by 99.7% within 2 years of detonation, such that detection throughout the hypothesized inspection is only achievable close to the explosion where deposition was highest. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. Radionuclide observables for the Platte underground nuclear explosive test on 14 April 1962

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, Jonathan L.; Milbrath, Brian D.

    2016-11-01

    Past nuclear weapons tests provide invaluable information for understanding the radionuclide observables and data quality objectives expected during an On-site Inspection (OSI) for the Comprehensive Nuclear-Test-Ban Treaty (CTBT). These radioactive signatures are complex and subject to spatial and temporal variability. The Platte Underground Nuclear Test on 14 April 1962 provides extensive environmental monitoring data that can be modelled and used to assess an OSI. The 1.6 kT test is especially useful as it released the highest amounts of recorded activity during Operation Nougat at the Nevada Test Site – now known as the Nevada National Security Site (NNSS). It has been estimated that 0.36% of the activity was released, and dispersed in a northerly direction. The deposition ranged from 1 x 10-11 to 1 x 10-9 of the atmospheric release (per m2), and has been used to evaluate a hypothetical OSI at 1 week to 2 years post-detonation. Radioactive decay reduces the activity of the 17 OSI relevant radionuclides by 99.7%, such that detection throughout the inspection is only achievable close to the explosion where deposition was highest.

  8. Water movement through the unsaturated zone of the High Plains Aquifer in the Central Platte Natural Resources District, Nebraska, 2008-12

    Science.gov (United States)

    Steele, Gregory V.; Gurdak, Jason J.; Hobza, Christopher M.

    2014-01-01

    Uncertainty about the effects of land use and climate on water movement in the unsaturated zone and on groundwater recharge rates can lead to uncertainty in water budgets used for groundwater-flow models. To better understand these effects, a cooperative study between the U.S. Geological Survey and the Central Platte Natural Resources District was initiated in 2007 to determine field-based estimates of recharge rates in selected land-use areas of the Central Platte Natural Resources District in Nebraska. Measured total water potential and unsaturated-zone profiles of tritium, chloride, nitrate as nitrogen, and bromide, along with groundwater-age dates, were used to evaluate water movement in the unsaturated zone and groundwater recharge rates in the central Platte River study area. Eight study sites represented an east-west precipitation contrast across the study area—four beneath groundwater-irrigated cropland (sites 2, 5, and 6 were irrigated corn and site 7 was irrigated alfalfa/corn rotation), three beneath rangeland (sites 1, 4, and 8), and one beneath nonirrigated cropland, or dryland (site 3). Measurements of transient vertical gradients in total water potential indicated that periodic wetting fronts reached greater mean maximum depths beneath the irrigated sites than beneath the rangeland sites, in part, because of the presence of greater and constant antecedent moisture. Beneath the rangeland sites, greater temporal variation in antecedent moisture and total water potential existed and was, in part, likely a result of local precipitation and evapotranspiration. Moreover, greater variability was noticed in the total water potential profiles beneath the western sites than the corresponding eastern sites, which was attributed to less mean annual precipitation in the west. The depth of the peak post-bomb tritium concentration or the interface between the pre-bomb/post-bomb tritium, along with a tritium mass balance, within sampled soil profiles were used to

  9. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  10. SOFTWARE OPEN SOURCE, SOFTWARE GRATIS?

    Directory of Open Access Journals (Sweden)

    Nur Aini Rakhmawati

    2006-01-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Berlakunya Undang – undang Hak Atas Kekayaan Intelektual (HAKI, memunculkan suatu alternatif baru untuk menggunakan software open source. Penggunaan software open source menyebar seiring dengan isu global pada Information Communication Technology (ICT saat ini. Beberapa organisasi dan perusahaan mulai menjadikan software open source sebagai pertimbangan. Banyak konsep mengenai software open source ini. Mulai dari software yang gratis sampai software tidak berlisensi. Tidak sepenuhnya isu software open source benar, untuk itu perlu dikenalkan konsep software open source mulai dari sejarah, lisensi dan bagaimana cara memilih lisensi, serta pertimbangan dalam memilih software open source yang ada. Kata kunci :Lisensi, Open Source, HAKI

  11. Surface Spills at Unconventional Oil and Gas Sites: a Contaminant Transport Modeling Study for the South Platte Alluvial Aquifer

    Science.gov (United States)

    McCray, J. E.; Kanno, C.; McLaughlin, M.; Blotevogel, J.; Borch, T.

    2016-12-01

    Hydraulic fracturing has revolutionized the U.S.'s energy portfolio by making shale reservoirs productive and commercially viable. However, the public is concerned that the chemical constituents in hydraulic fracturing fluid, produced water, or natural gas itself could potentially impact groundwater. Here, we present fate and transport simulations of aqueous fluid surface spills. Surface spills are the most likely contamination pathway to occur during oil and gas production operations. We have three primary goals: 1) evaluate whether or not these spills pose risks to groundwater quality in the South Platte aquifer system, 2) develop a screening level methodology that could be applied at other sites and for various pollutants, and 3) demonstrate the potential importance of co-contaminant interactions using selected chemicals. We considered two types of fluid that can be accidentally released at oil and gas sites: produced water and hydraulic fracturing fluid. Benzene was taken to be a representative contaminant of interest for produced water. Glutaraldehyde, polyethylene glycol, and polyacrylamide were the chemical additives considered for spills of hydraulic fracturing fluid. We focused on the South Platte Alluvial Aquifer, which is located in the greater Denver metro area and overlaps a zone of high-density oil and gas development. Risk of groundwater pollution was based on predicted concentration at the groundwater table. In general, results showed groundwater contamination due to produced water and hydraulic fracturing fluid spills is low in most areas of the South Platte system for the contaminants and spill conditions investigated. Substantial risk may exist in certain areas where the groundwater table is shallow (less than 10 ft below ground surface) and when large spills and large post-spill storms occur. Co-chemical interactions are an important consideration in certain cases when modeling hydraulic fracturing fluid spills. By helping to identify locations

  12. Evaluating Biodiversity Response toForecasted Land Use Change: A Case Study in the South Platte River Basin, Colorado

    Science.gov (United States)

    Effects of future land use change on watersheds have important management implications. Seamless, national-scale land-use-change scenarios for developed land were acquired from the U.S. Environmental Protection Agency Integrated Climate and Land Use Scenarios (lCLUS) project and...

  13. Bioavailability and exposure assessment of petroleum hydrocarbons and trace elements in birds nesting near the North Platte River, Casper, Wyoming

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objectives of this study were to compare refinery-related petroleum hydrocarbon concentrations in nestling tree swallows (Tachycineta bicolor) and nestling house...

  14. Impacts of WWTP Effluents on the Hepatic Metabolome of Male and Female Fathead Minnows in the South Platte River, Colorado

    Science.gov (United States)

    Metabolomics is rapidly becoming established as an eefective tool for studying the responses of organisms, such as fish, to various environmentally relevant stressors. While the majority of the work has been laboratory-based, successful application of the technique in recent year...

  15. Software Reviews.

    Science.gov (United States)

    Smith, Richard L., Ed.

    1985-01-01

    Reviews software packages by providing extensive descriptions and discussions of their strengths and weaknesses. Software reviewed include (1) "VISIFROG: Vertebrate Anatomy" (grade seven-adult); (2) "Fraction Bars Computer Program" (grades three to six) and (3) four telecommunications utilities. (JN)

  16. Effects of an extreme flood on trace elements in river water—From urban stream to major river basin

    Science.gov (United States)

    Barber, Larry B.; Paschke, Suzanne; Battaglin, William A.; Douville, Chris; Fitzgerald, Kevin C.; Keefe, Steffanie H.; Roth, David A.; Vajda, Alan M.

    2017-01-01

    Major floods adversely affect water quality through surface runoff, groundwater discharge, and damage to municipal water infrastructure. Despite their importance, it can be difficult to assess the effects of floods on streamwater chemistry because of challenges collecting samples and the absence of baseline data. This study documents water quality during the September 2013 extreme flood in the South Platte River, Colorado, USA. Weekly time-series water samples were collected from 3 urban source waters (municipal tap water, streamwater, and wastewater treatment facility effluent) under normal-flow and flood conditions. In addition, water samples were collected during the flood at 5 locations along the South Platte River and from 7 tributaries along the Colorado Front Range. Samples were analyzed for 54 major and trace elements. Specific chemical tracers, representing different natural and anthropogenic sources and geochemical behaviors, were used to compare streamwater composition before and during the flood. The results differentiate hydrological processes that affected water quality: (1) in the upper watershed, runoff diluted most dissolved constituents, (2) in the urban corridor and lower watershed, runoff mobilized soluble constituents accumulated on the landscape and contributed to stream loading, and (3) flood-induced groundwater discharge mobilized soluble constituents stored in the vadose zone.

  17. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  18. Computer software.

    Science.gov (United States)

    Rosenthal, L E

    1986-10-01

    Software is the component in a computer system that permits the hardware to perform the various functions that a computer system is capable of doing. The history of software and its development can be traced to the early nineteenth century. All computer systems are designed to utilize the "stored program concept" as first developed by Charles Babbage in the 1850s. The concept was lost until the mid-1940s, when modern computers made their appearance. Today, because of the complex and myriad tasks that a computer system can perform, there has been a differentiation of types of software. There is software designed to perform specific business applications. There is software that controls the overall operation of a computer system. And there is software that is designed to carry out specialized tasks. Regardless of types, software is the most critical component of any computer system. Without it, all one has is a collection of circuits, transistors, and silicone chips.

  19. Software piracy

    OpenAIRE

    Kráčmer, Stanislav

    2011-01-01

    The objective of the present thesis is to clarify the term of software piracy and to determine responsibility of individual entities as to actual realization of software piracy. First, the thesis focuses on a computer programme, causes, realization and pitfalls of its inclusion under copyright protection. Subsequently, it observes methods of legal usage of a computer programme. This is the point of departure for the following attempt to define software piracy, accompanied with methods of actu...

  20. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  1. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  2. The application of HEC-RAS software in Zhu River dike failure flood simulation%HEC-RAS软件在珠江三角洲河道溃堤洪水模拟中的应用

    Institute of Scientific and Technical Information of China (English)

    方泽建

    2014-01-01

    The River Delta one-dimensional unsteady flow model is constructed by using HEC-RAS software , and the model with Lateral Structure Breach is used to simulate Luogewei levee break process in Foshan City , around Huyong parking lot.The model simulation can get the discharge process of breach ,the water level of the river and the water level with different breach width and the repair time.The results show that the breach width is an important factor to influence the design water level.When the breach width reaches a certain value ,the design water level will tend to be stable.The levee break model based on HEC-RAS can simulate the levee break process combining with the local emergency flood fighting ,and it can provide a reliable technical sup-port for the design of parking lot located in the Zhu River Delta dike.%运用HEC-RAS软件构建珠江三角洲一维河网非稳定流水动力模型,利用该模型与侧向水工结构溃坝模块(Lateral Structure Breach),进行湖涌停车场所在佛山市罗格围的溃堤模拟计算。得到不同溃口宽度、溃口修复时间等条件下溃口处的流量过程、外江水位过程、围内水位过程。实例结果表明,溃口宽度是影响围内设计水位的重要因素,当溃口宽度达某一值时,围内设计水位将趋于稳定。基于HEC-RAS的溃堤模型可与当地防汛抢险相结合进行溃堤影响分析,可为珠江三角洲堤围内停车场设计提供可靠的技术支持,供借鉴。

  3. Software Innovation

    DEFF Research Database (Denmark)

    Rose, Jeremy

      Innovation is the forgotten key to modern systems development - the element that defines the enterprising engineer, the thriving software firm and the cutting edge software application.  Traditional forms of technical education pay little attention to creativity - often encouraging overly...... rationalistic ways of thinking which stifle the ability to innovate. Professional software developers are often drowned in commercial drudgery and overwhelmed by work pressure and deadlines. The topic that will both ensure success in the market and revitalize their work lives is never addressed. This book sets...... out the new field of software innovation. It organizes the existing scientific research into eight simple heuristics - guiding principles for organizing a system developer's work-life so that it focuses on innovation....

  4. Software Reviews.

    Science.gov (United States)

    Classroom Computer Learning, 1990

    1990-01-01

    Reviewed are three computer software packages including "Martin Luther King, Jr.: Instant Replay of History,""Weeds to Trees," and "The New Print Shop, School Edition." Discussed are hardware requirements, costs, grade levels, availability, emphasis, strengths, and weaknesses. (CW)

  5. Software Reviews.

    Science.gov (United States)

    Wulfson, Stephen, Ed.

    1987-01-01

    Reviews seven computer software programs that can be used in science education programs. Describes courseware which deals with muscles and bones, terminology, classifying animals without backbones, molecular structures, drugs, genetics, and shaping the earth's surface. (TW)

  6. Software Reviews.

    Science.gov (United States)

    Dwyer, Donna; And Others

    1989-01-01

    Reviewed are seven software packages for Apple and IBM computers. Included are: "Toxicology"; "Science Corner: Space Probe"; "Alcohol and Pregnancy"; "Science Tool Kit Plus"; Computer Investigations: Plant Growth"; "Climatrolls"; and "Animal Watch: Whales." (CW)

  7. Reusable Software.

    Science.gov (United States)

    1984-03-01

    overseeing reusable software, the Reusable Software Organization ( RUSO ). This author does not feel at this time that establishment of such a specific...49] have not been accompanied by establishment of RUSO -like activities. There is need, however, for assurance that functions which a RUSO might be...assurance 6. establishment and maintenance of reuse archival facilities and activities. Actual establishment of a RUSO is best dictated by size of the

  8. Software Epistemology

    Science.gov (United States)

    2016-03-01

    comprehensive approach for determining software epistemology which significantly advances the state of the art in automated vulnerability discovery...straightforward. First, internet -based repositories of open source software (e.g., FreeBSD ports, GitHub, SourceForge, etc.) are mined Approved for...the fix delta, we attempted to perform the same process to determine if the firmware release present in an Internet -of-Things (IoT) streaming camera

  9. Predicting the likelihood of altered streamflows at ungauged rivers across the conterminous United States

    Science.gov (United States)

    Eng, Kenny; Carlisle, Daren M.; Wolock, David M.; Falcone, James A.

    2013-01-01

    An approach is presented in this study to aid water-resource managers in characterizing streamflow alteration at ungauged rivers. Such approaches can be used to take advantage of the substantial amounts of biological data collected at ungauged rivers to evaluate the potential ecological consequences of altered streamflows. National-scale random forest statistical models are developed to predict the likelihood that ungauged rivers have altered streamflows (relative to expected natural condition) for five hydrologic metrics (HMs) representing different aspects of the streamflow regime. The models use human disturbance variables, such as number of dams and road density, to predict the likelihood of streamflow alteration. For each HM, separate models are derived to predict the likelihood that the observed metric is greater than (‘inflated’) or less than (‘diminished’) natural conditions. The utility of these models is demonstrated by applying them to all river segments in the South Platte River in Colorado, USA, and for all 10-digit hydrologic units in the conterminous United States. In general, the models successfully predicted the likelihood of alteration to the five HMs at the national scale as well as in the South Platte River basin. However, the models predicting the likelihood of diminished HMs consistently outperformed models predicting inflated HMs, possibly because of fewer sites across the conterminous United States where HMs are inflated. The results of these analyses suggest that the primary predictors of altered streamflow regimes across the Nation are (i) the residence time of annual runoff held in storage in reservoirs, (ii) the degree of urbanization measured by road density and (iii) the extent of agricultural land cover in the river basin.

  10. MIAWARE Software

    DEFF Research Database (Denmark)

    Wilkowski, Bartlomiej; Pereira, Oscar N. M.; Dias, Paulo

    2008-01-01

    This article presents MIAWARE, a software for Medical Image Analysis With Automated Reporting Engine, which was designed and developed for doctor/radiologist assistance. It allows to analyze an image stack from computed axial tomography scan of lungs (thorax) and, at the same time, to mark all...... pathologies on images and report their characteristics. The reporting process is normalized - radiologists cannot describe pathological changes with their own words, but can only use some terms from a specific vocabulary set provided by the software. Consequently, a normalized radiological report...... is automatically generated. Furthermore, MIAWARE software is accompanied with an intelligent search engine for medical reports, based on the relations between parts of the lungs. A logical structure of the lungs is introduced to the search algorithm through the specially developed ontology. As a result...

  11. Software engineering

    CERN Document Server

    Thorin, Marc

    1985-01-01

    Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

  12. [Software version and medical device software supervision].

    Science.gov (United States)

    Peng, Liang; Liu, Xiaoyan

    2015-01-01

    The importance of software version in the medical device software supervision does not cause enough attention at present. First of all, the effect of software version in the medical device software supervision is discussed, and then the necessity of software version in the medical device software supervision is analyzed based on the discussion of the misunderstanding of software version. Finally the concrete suggestions on software version naming rules, software version supervision for the software in medical devices, and software version supervision scheme are proposed.

  13. Laboratory and Field Application of River Depth Estimation Techniques Using Remotely Sensed Data: Annual Report Year 1

    Science.gov (United States)

    2013-09-30

    The camera we used is a FLIR SC 8300 HD. The camera has an indium antimonide (InSb) sensor that detects mid- range IR light in the 3-5 micron (μm) band...this work to other research projects, including work on the Kootenai, Platte, and Russian Rivers. In addition, we are working closely with NASA and...MD_SWMS, American Society for Photogrammetry and Remote Sensing, Proceedings of the 2008 Annual Conference –PNAMP Special Session: Remote Sensing

  14. Educational Software.

    Science.gov (United States)

    Northwest Regional Educational Lab., Portland, OR.

    The third session of IT@EDU98 consisted of five papers on educational software and was chaired by Tran Van Hao (University of Education, Ho Chi Minh City, Vietnam). "Courseware Engineering" (Nguyen Thanh Son, Ngo Ngoc Bao Tran, Quan Thanh Tho, Nguyen Hong Lam) briefly describes the use of courseware. "Machine Discovery Theorems in Geometry: A…

  15. Software Patents.

    Science.gov (United States)

    Burke, Edmund B.

    1994-01-01

    Outlines basic patent law information that pertains to computer software programs. Topics addressed include protection in other countries; how to obtain patents; kinds of patents; duration; classes of patentable subject matter, including machines and processes; patentability searches; experimental use prior to obtaining a patent; and patent…

  16. Software Systems

    Institute of Scientific and Technical Information of China (English)

    崔涛; 周淼

    1996-01-01

    The information used with computers is known as software and includesprograms and data. Programs are sets of instructions telling the computerwhat operations have to be carried out and in what order they should be done. Specialised programs which enable the computer to be used for particularpurposes are called applications programs. A collection of these programs kept

  17. Software Reviews.

    Science.gov (United States)

    Science and Children, 1990

    1990-01-01

    Reviewed are seven computer software packages for IBM and/or Apple Computers. Included are "Windows on Science: Volume 1--Physical Science"; "Science Probe--Physical Science"; "Wildlife Adventures--Grizzly Bears"; "Science Skills--Development Programs"; "The Clean Machine"; "Rock Doctor"; and "Geology Search." Cost, quality, hardware, and…

  18. Software Review.

    Science.gov (United States)

    McGrath, Diane, Ed.

    1989-01-01

    Reviewed is a computer software package entitled "Audubon Wildlife Adventures: Grizzly Bears" for Apple II and IBM microcomputers. Included are availability, hardware requirements, cost, and a description of the program. The murder-mystery flavor of the program is stressed in this program that focuses on illegal hunting and game management. (CW)

  19. EPIQR software

    Energy Technology Data Exchange (ETDEWEB)

    Flourentzos, F. [Federal Institute of Technology, Lausanne (Switzerland); Droutsa, K. [National Observatory of Athens, Athens (Greece); Wittchen, K.B. [Danish Building Research Institute, Hoersholm (Denmark)

    1999-11-01

    The support of the EPIQR method is a multimedia computer program. Several modules help the users of the method to treat the data collected during a diagnosis survey, to set up refurbishment scenario and calculate their cost or energy performance, and finally to visualize the results in a comprehensive way and to prepare quality reports. This article presents the structure and the main features of the software. (au)

  20. EPIQR software

    Energy Technology Data Exchange (ETDEWEB)

    Flourentzos, F. [Federal Institute of Technology-Lausanne (EPFL), Solar Energy and Building Physics Laboratory (LESO-PB), Lausanne (Switzerland); Droutsa, K. [National Observatory of Athens, Institute of Meteorology and Physics of Atmospheric Environment, Group Energy Conservation, Athens (Greece); Wittchen, K.B. [Danish Building Research Institute, Division of Energy and Indoor Environment, Hoersholm, (Denmark)

    2000-07-01

    The support of the EPIQR method is a multimedia computer program. Several modules help the users of the method to treat the data collected during a diagnosis survey, to set up refurbishment scenarios and calculate their cost or energy performance, and finally to visualize the results in a comprehensive way and to prepare quality reports. This article presents the structure and the main features of the software. (author)

  1. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  2. Software Engineering to Professionalize Software Development

    Directory of Open Access Journals (Sweden)

    Juan Miguel Alonso

    2011-12-01

    Full Text Available The role, increasingly important, that plays the software in the systems with widespread effects presents new challenges for the formation of Software Engineers. Not only because social dependence software is increasing, but also because the character of software development is also changing and with it the demands for software developers certified. In this paper are propose some challenges and aspirations that guide the learning processes Software Engineering and help to identify the need to train professionals in software development.

  3. Enhancing mud supply from the Lower Missouri River to the Mississippi River Delta USA: Dam bypassing and coastal restoration

    Science.gov (United States)

    Kemp, G. Paul; Day, John W.; Rogers, J. David; Giosan, Liviu; Peyronnin, Natalie

    2016-12-01

    Sand transport to the Mississippi River Delta (MRD) remains sufficient to build wetlands in shallow, sheltered coastal bays fed by engineered diversions on the Mississippi River (MR) and its Atchafalaya River (AR) distributary. But suspended mud (silt & clay) flux to the coast has dropped from a mean of 390 Mt y-1 in the early 1950s, to 100 Mt y-1 since 1970. This fine-grained sediment travels deeper into receiving estuarine basins and plays a critical role in sustaining existing marshes. Virtually all of the 300 Mt y-1 of missing mud once flowed from the Missouri River (MOR) Basin before nearly 100 dams were built as part of the Pick-Sloan water development project. About 100 Mt y-1 is now intercepted by main-stem Upper MOR dams closed in 1953. But the remaining 200 Mt y-1 is trapped by impoundments built on tributaries to the Lower MOR in the 1950s and 1960s. Sediment flux during the post-dam high MOR discharge years of 1973, 1993 and 2011 approached pre-dam levels when tributaries to the Lower MOR, including the Platte and Kansas Rivers, contributed to flood flows. West bank tributaries drain a vast, arid part of the Great Plains, while those entering from the east bank traverse the lowlands of the MOR floodplain. Both provinces are dominated by highly erodible loess soils. Staunching the continued decline in MR fine-grained sediment flux has assumed greater importance now that engineered diversions are being built to reconnect the Lowermost MR to the MRD. Tributary dam bypassing in the Lower MOR basin could increase mud supply to the MRD by 100-200 Mt y-1 within 1-2 decades. Such emergency measures to save the MRD are compatible with objectives of the Missouri River Restoration and Platte River Recovery Programs to restore MOR riparian habitat for endangered species. Rapid mobilization to shunt fine-grained sediments past as many as 50 Lower MOR tributary dams in several U.S. states will undoubtedly require as much regional coordination and funding in the 21st

  4. Selecting and effectively using a computer aided software engineering tool

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, D.L.

    1989-01-01

    Software engineering is a science by which user requirements are translated into a quality software product. Computer Aided Software Engineering (CASE) is the scientific application of a set of tools and methods to a software which results in high-quality, defect-free, and maintainable software products. The Computer Systems Engineering (CSE) group of Separations Technology at the Savannah River Site has successfully used CASE tools to produce high-quality, reliable, and maintainable software products. This paper details the selection process CSE used to acquire a commonly available CASE product and how the CSE group effectively used this CASE tool to consistently produce quality software. 9 refs.

  5. Space Software

    Science.gov (United States)

    1990-01-01

    Xontech, Inc.'s software package, XonVu, simulates the missions of Voyager 1 at Jupiter and Saturn, Voyager 2 at Jupiter, Saturn, Uranus and Neptune, and Giotto in close encounter with Comet Halley. With the program, the user can generate scenes of the planets, moons, stars or Halley's nucleus and tail as seen by Giotto, all graphically reproduced with high accuracy in wireframe representation. Program can be used on a wide range of computers, including PCs. User friendly and interactive, with many options, XonVu can be used by a space novice or a professional astronomer. With a companion user's manual, it sells for $79.

  6. Software architecture

    CERN Document Server

    Vogel, Oliver; Chughtai, Arif

    2011-01-01

    As a software architect you work in a wide-ranging and dynamic environment. You have to understand the needs of your customer, design architectures that satisfy both functional and non-functional requirements, and lead development teams in implementing the architecture. And it is an environment that is constantly changing: trends such as cloud computing, service orientation, and model-driven procedures open up new architectural possibilities. This book will help you to develop a holistic architectural awareness and knowledge base that extends beyond concrete methods, techniques, and technologi

  7. Global Software Engineering: A Software Process Approach

    Science.gov (United States)

    Richardson, Ita; Casey, Valentine; Burton, John; McCaffery, Fergal

    Our research has shown that many companies are struggling with the successful implementation of global software engineering, due to temporal, cultural and geographical distance, which causes a range of factors to come into play. For example, cultural, project managementproject management and communication difficulties continually cause problems for software engineers and project managers. While the implementation of efficient software processes can be used to improve the quality of the software product, published software process models do not cater explicitly for the recent growth in global software engineering. Our thesis is that global software engineering factors should be included in software process models to ensure their continued usefulness in global organisations. Based on extensive global software engineering research, we have developed a software process, Global Teaming, which includes specific practices and sub-practices. The purpose is to ensure that requirements for successful global software engineering are stipulated so that organisations can ensure successful implementation of global software engineering.

  8. SOFTWARE METRICS VALIDATION METHODOLOGIES IN SOFTWARE ENGINEERING

    Directory of Open Access Journals (Sweden)

    K.P. Srinivasan

    2014-12-01

    Full Text Available In the software measurement validations, assessing the validation of software metrics in software engineering is a very difficult task due to lack of theoretical methodology and empirical methodology [41, 44, 45]. During recent years, there have been a number of researchers addressing the issue of validating software metrics. At present, software metrics are validated theoretically using properties of measures. Further, software measurement plays an important role in understanding and controlling software development practices and products. The major requirement in software measurement is that the measures must represent accurately those attributes they purport to quantify and validation is critical to the success of software measurement. Normally, validation is a collection of analysis and testing activities across the full life cycle and complements the efforts of other quality engineering functions and validation is a critical task in any engineering project. Further, validation objective is to discover defects in a system and assess whether or not the system is useful and usable in operational situation. In the case of software engineering, validation is one of the software engineering disciplines that help build quality into software. The major objective of software validation process is to determine that the software performs its intended functions correctly and provides information about its quality and reliability. This paper discusses the validation methodology, techniques and different properties of measures that are used for software metrics validation. In most cases, theoretical and empirical validations are conducted for software metrics validations in software engineering [1-50].

  9. Sandia software guidelines: Software quality planning

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    This volume is one in a series of Sandia Software Guidelines intended for use in producing quality software within Sandia National Laboratories. In consonance with the IEEE Standard for Software Quality Assurance Plans, this volume identifies procedures to follow in producing a Software Quality Assurance Plan for an organization or a project, and provides an example project SQA plan. 2 figs., 4 tabs.

  10. Software engineering architecture-driven software development

    CERN Document Server

    Schmidt, Richard F

    2013-01-01

    Software Engineering: Architecture-driven Software Development is the first comprehensive guide to the underlying skills embodied in the IEEE's Software Engineering Body of Knowledge (SWEBOK) standard. Standards expert Richard Schmidt explains the traditional software engineering practices recognized for developing projects for government or corporate systems. Software engineering education often lacks standardization, with many institutions focusing on implementation rather than design as it impacts product architecture. Many graduates join the workforce with incomplete skil

  11. River engineering

    NARCIS (Netherlands)

    De Vries, M.

    1993-01-01

    One dimension models - basic eauations, analytical models, numberical models. One dimensional models -suspended load, roughness and resistance of river beds. Solving river problems - tools, flood mitigation, bank protection.

  12. Software Metrics to Estimate Software Quality using Software Component Reusability

    Directory of Open Access Journals (Sweden)

    Prakriti Trivedi

    2012-03-01

    Full Text Available Today most of the applications developed using some existing libraries, codes, open sources etc. As a code is accessed in a program, it is represented as the software component. Such as in java beans and in .net ActiveX controls are the software components. These components are ready to use programming code or controls that excel the code development. A component based software system defines the concept of software reusability. While using these components the main question arise is whether to use such components is beneficial or not. In this proposed work we are trying to present the answer for the same question. In this work we are presenting a set of software matrix that will check the interconnection between the software component and the application. How strong this relation defines the software quality after using this software component. The overall metrics will return the final result in terms of the boundless of the component with application.

  13. The software life cycle

    CERN Document Server

    Ince, Darrel

    1990-01-01

    The Software Life Cycle deals with the software lifecycle, that is, what exactly happens when software is developed. Topics covered include aspects of software engineering, structured techniques of software development, and software project management. The use of mathematics to design and develop computer systems is also discussed. This book is comprised of 20 chapters divided into four sections and begins with an overview of software engineering and software development, paying particular attention to the birth of software engineering and the introduction of formal methods of software develop

  14. Evaluating the Risks of Surface Spills Associated with Hydraulic Fracturing Activities to Groundwater Resources: a Modeling Study in the South Platte Alluvial Aquifer

    Science.gov (United States)

    Kanno, C.; McLaughlin, M.; Blotevogel, J.; Benson, D. A.; Borch, T.; McCray, J. E.

    2015-12-01

    Hydraulic fracturing has revolutionized the U.S.'s energy portfolio by making shale reservoirs productive and commercially viable. However, the public is concerned that the chemical constituents in hydraulic fracturing fluid, produced water, or natural gas itself could potentially impact groundwater or adjacent streams. Here, we conduct fate and transport simulations of surface spills, the most likely contamination pathway to occur during oil and gas production operations, to evaluate whether or not these spills pose risks to groundwater quality. We focus on the South Platte Alluvial Aquifer, which is located in the greater Denver metro area and overlaps a zone of high-density oil and gas development. The purpose of this work is to assess the mobility and persistence of chemical contaminants (e.g. biocides, friction reducers, surfactants, hydrocarbons, etc.) —based on sorption to soil, degradation potential, co-contaminant interactions, and spill conditions—and to understand the site characteristics and hydrologic conditions that would make a particular location prone to groundwater quality degradation in the event of an accidental release. We propose a coupled analytical-numerical approach that could be duplicated by environmental consultants. Results suggest that risk of groundwater pollution, based on predicted concentration at the groundwater table, is low in most areas of the South Platte system for the contaminants investigated under common spill conditions. However, substantial risk may exist in certain areas where the groundwater table is shallow. In addition, transport of certain contaminants is influenced by interactions with other constituents in produced or stimulation fluids. By helping to identify locations in the Front Range of Colorado that are at low or high risk for groundwater contamination due to a surface spill, it is our hope that this work will aid in improving prevention, mitigation, and remediation practices so that decision-makers can

  15. Analysis of managed aquifer recharge for retiming streamflow in an alluvial river

    Science.gov (United States)

    Ronayne, Michael J.; Roudebush, Jason A.; Stednick, John D.

    2017-01-01

    Maintenance of low flows during dry periods is critical for supporting ecosystem function in many rivers. Managed aquifer recharge is one method that can be used to augment low flows in rivers that are hydraulically connected to an alluvial groundwater system. In this study, we performed numerical modeling to evaluate a managed recharge operation designed to retime streamflow in the South Platte River, northeastern Colorado (USA). Modeling involved the simulation of spatially and temporally variable groundwater-surface water exchange, as well as streamflow routing in the river. Periodic solutions that incorporate seasonality were developed for two scenarios, a natural base case scenario and an active management scenario that included groundwater pumping and managed recharge. A framework was developed to compare the scenarios by analyzing changes in head-dependent inflows and outflows to/from the aquifer, which was used to interpret the simulated impacts on streamflow. The results clearly illustrate a retiming of streamflow. Groundwater pumping near the river during winter months causes a reduction in streamflow during those months. Delivery of the pumped water to recharge ponds, located further from the river, has the intended effect of augmenting streamflow during low-flow summer months. Higher streamflow is not limited to the target time period, however, which highlights an inefficiency of flow augmentation projects that rely on water retention in the subsurface.

  16. Amalgamation of Personal Software Process in Software ...

    African Journals Online (AJOL)

    evolutionary series of personal software engineering techniques that an engineer learns and ... Article History: Received : 30-04- ... began to realize that software process, plans and methodologies for ..... Executive Strategy. Addison-Wesley ...

  17. THE POSSIBILITIES OF USING HEC-RAS SOFTWARE FOR MODELLING HYDRAULIC CONDITIONS OF WATER FLOW IN THE FISH PASS EXAMPLED BY THE POMIŁOWO BARRAGE ON THE WIEPRZA RIVER

    Directory of Open Access Journals (Sweden)

    Mateusz Hammerling

    2016-04-01

    Full Text Available The aim of the article is to analyse hydraulic conditions of water flow in a fish pass. The test facility is part of the Pomiłowo barrage in the commune of Sławno, Poland. The authors applied HEC-RAS software for modelling hydraulic parameters of the water flow in the fish pass. The data from field measurements was implemented in the software and calculations of changes in the water table in the fish pass were made. The results confirmed the usefulness of HEC-RAS software for estimating hydraulic parameters of water flow in a fish pass. HEC-RAS software enables to take into account the parameters responsible for the phenomena accompanying the flow through a fish pass. Selecting mathematical model parameters (coefficients should be preceded by a multidimensional analysis of the facility. More precise information on hydraulics, hydrology and biology of the test fish pass are also required.

  18. THE POSSIBILITIES OF USING HEC-RAS SOFTWARE FOR MODELLING HYDRAULIC CONDITIONS OF WATER FLOW IN THE FISH PASS EXAMPLED BY THE POMIŁOWO BARRAGE ON THE WIEPRZA RIVER

    National Research Council Canada - National Science Library

    Mateusz Hammerling; Natalia Walczak; Zbigniew Walczak; Paweł Zawadzki

    2016-01-01

    .... The test facility is part of the Pomiłowo barrage in the commune of Sławno, Poland. The authors applied HEC-RAS software for modelling hydraulic parameters of the water flow in the fish pass...

  19. Software attribute visualization for high integrity software

    Energy Technology Data Exchange (ETDEWEB)

    Pollock, G.M.

    1998-03-01

    This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

  20. Ontologies for software engineering and software technology

    CERN Document Server

    Calero, Coral; Piattini, Mario

    2006-01-01

    Covers two applications of ontologies in software engineering and software technology: sharing knowledge of the problem domain and using a common terminology among all stakeholders; and filtering the knowledge when defining models and metamodels. This book is of benefit to software engineering researchers in both academia and industry.

  1. Controlling Software Piracy.

    Science.gov (United States)

    King, Albert S.

    1992-01-01

    Explains what software manufacturers are doing to combat software piracy, recommends how managers should deal with this problem, and provides a role-playing exercise to help students understand the issues in software piracy. (SR)

  2. Space Flight Software Development Software for Intelligent System Health Management

    Science.gov (United States)

    Trevino, Luis C.; Crumbley, Tim

    2004-01-01

    The slide presentation examines the Marshall Space Flight Center Flight Software Branch, including software development projects, mission critical space flight software development, software technical insight, advanced software development technologies, and continuous improvement in the software development processes and methods.

  3. Software Engineering Guidebook

    Science.gov (United States)

    Connell, John; Wenneson, Greg

    1993-01-01

    The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

  4. Software and systems traceability

    CERN Document Server

    Cleland-Huang, Jane; Zisman, Andrea

    2012-01-01

    ""Software and Systems Traceability"" provides a comprehensive description of the practices and theories of software traceability across all phases of the software development lifecycle. The term software traceability is derived from the concept of requirements traceability. Requirements traceability is the ability to track a requirement all the way from its origins to the downstream work products that implement that requirement in a software system. Software traceability is defined as the ability to relate the various types of software artefacts created during the development of software syst

  5. Maximizing ROI on software development

    CERN Document Server

    Sikka, Vijay

    2004-01-01

    A brief review of software development history. Software complexity crisis. Software development ROI. The case for global software development and testing. Software quality and test ROI. How do you implement global software development and testing. Case studies.

  6. A health risk evaluation for pallid sturgeon (Scaphirhynchus albus) in the Lower Platte River using shovelnose sturgeon (Scaphirhynchus platorynchus) as a Surrogate

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Most sturgeon species worldwide have been in a steep declince since the 1900s. This research evaluated shovelnose sturgeon health, reproduction, and exposure to...

  7. A mixed-methods approach to assessing success in transitioning water management institutions: a case study of the Platte River Basin, Nebraska

    Directory of Open Access Journals (Sweden)

    Christina Hoffman Babbitt

    2015-03-01

    Full Text Available To address increasing conflicts between surface water and groundwater users, the state of Nebraska has adopted a more localized and integrated approach in managing water resources. Integrated approaches offer promise in better managing connected water resources within the state; however, little review of the potential benefits and/or challenges of these actions has been conducted. This case study uses both qualitative and quantitative data collection efforts to take an in-depth look at how this new and innovative management system is working through the eyes of stakeholders living and working in the basin. Data collection reveals that overall the current water management system is working relatively well, even though it is still in its infancy. However, the system could be further improved by ensuring all that stakeholder interests are represented, providing increased opportunities to participate, and continuing to work toward more holistic and proactive water management.

  8. Improving Software Developer's Competence

    DEFF Research Database (Denmark)

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  9. Ensuring Software IP Cleanliness

    Directory of Open Access Journals (Sweden)

    Mahshad Koohgoli

    2007-12-01

    Full Text Available At many points in the life of a software enterprise, determination of intellectual property (IP cleanliness becomes critical. The value of an enterprise that develops and sells software may depend on how clean the software is from the IP perspective. This article examines various methods of ensuring software IP cleanliness and discusses some of the benefits and shortcomings of current solutions.

  10. Improving Software Developer's Competence

    DEFF Research Database (Denmark)

    Abrahamsson, Pekka; Kautz, Karlheinz; Sieppi, Heikki

    2002-01-01

    Emerging agile software development methods are people oriented development approaches to be used by the software industry. The personal software process (PSP) is an accepted method for improving the capabilities of a single software engineer. Five original hypotheses regarding the impact...

  11. Agile Software Development

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  12. Software distribution using xnetlib

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, J.J. [Univ. of Tennessee, Knoxville, TN (US). Dept. of Computer Science]|[Oak Ridge National Lab., TN (US); Rowan, T.H. [Oak Ridge National Lab., TN (US); Wade, R.C. [Univ. of Tennessee, Knoxville, TN (US). Dept. of Computer Science

    1993-06-01

    Xnetlib is a new tool for software distribution. Whereas its predecessor netlib uses e-mail as the user interface to its large collection of public-domain mathematical software, xnetlib uses an X Window interface and socket-based communication. Xnetlib makes it easy to search through a large distributed collection of software and to retrieve requested software in seconds.

  13. Image Processing Software

    Science.gov (United States)

    Bosio, M. A.

    1990-11-01

    ABSTRACT: A brief description of astronomical image software is presented. This software was developed in a Digital Micro Vax II Computer System. : St presenta una somera descripci6n del software para procesamiento de imagenes. Este software fue desarrollado en un equipo Digital Micro Vax II. : DATA ANALYSIS - IMAGE PROCESSING

  14. Agile Software Development

    Science.gov (United States)

    Biju, Soly Mathew

    2008-01-01

    Many software development firms are now adopting the agile software development method. This method involves the customer at every level of software development, thus reducing the impact of change in the requirement at a later stage. In this article, the principles of the agile method for software development are explored and there is a focus on…

  15. Software productivity improvement through software engineering technology

    Science.gov (United States)

    Mcgarry, F. E.

    1985-01-01

    It has been estimated that NASA expends anywhere from 6 to 10 percent of its annual budget on the acquisition, implementation and maintenance of computer software. Although researchers have produced numerous software engineering approaches over the past 5-10 years; each claiming to be more effective than the other, there is very limited quantitative information verifying the measurable impact htat any of these technologies may have in a production environment. At NASA/GSFC, an extended research effort aimed at identifying and measuring software techniques that favorably impact productivity of software development, has been active over the past 8 years. Specific, measurable, software development technologies have been applied and measured in a production environment. Resulting software development approaches have been shown to be effective in both improving quality as well as productivity in this one environment.

  16. Great software debates

    CERN Document Server

    Davis, A

    2004-01-01

    The industry’s most outspoken and insightful critic explains how the software industry REALLY works. In Great Software Debates, Al Davis, shares what he has learned about the difference between the theory and the realities of business and encourages you to question and think about software engineering in ways that will help you succeed where others fail. In short, provocative essays, Davis fearlessly reveals the truth about process improvement, productivity, software quality, metrics, agile development, requirements documentation, modeling, software marketing and sales, empiricism, start-up financing, software research, requirements triage, software estimation, and entrepreneurship.

  17. Contested Rivers

    DEFF Research Database (Denmark)

    Gorm Hansen, Louise Lyngfeldt

    explores translocal connections through ethnographic fieldwork at a global water conference and preliminary fieldwork at chosen locations on China's Nu River. The Nu River is one of the last undammed rivers in Asia and runs through China close to the Chinese-Burmese border, then flows into the Andaman Sea...

  18. Software Engineering for Practiced Software Enhancement

    Directory of Open Access Journals (Sweden)

    Rashmi Yadav

    2011-03-01

    Full Text Available Software development scenario particularly in IT industries is very competitive and demands for development with minimum resources. Software development started and prevailed up to an extent in industry without the use of software engineering practices, which was perceived as an overhead. This approach causes over use of resources, such as money, man-hours, hardware components. This paper attempts to present the causes of inefficiencies in an almost exhaustive way. Further, an attempt has been made to elaborate the software engineering methods as remedies against the listed causes of inefficiencies of development.

  19. Software Metrics for Identifying Software Size in Software Development Projects

    Directory of Open Access Journals (Sweden)

    V.S.P Vidanapathirana

    2015-11-01

    Full Text Available Measurements are fundamental any engineering discipline. They indicate the amount, extent, dimension or capacity of an attribute or a product, in a quantitative manner. The analyzed results of the measured data can be given as the basic idea of metrics. It is a quantitative representation of the measurements of the degree to which a system, component, or process possesses a given attribute. When it comes to software, the metrics are a wide scope of measurements of computer programming. The size oriented metrics takes a main role in it since they can be used as the key for better estimations, to improve trust and confidence, and to have a better control over the software products. Software professionals traditionally have been measuring the size of software applications by using several methods. In this paper the researchers discuss about the software size metrics for identifying software size and it is mainly focused on the software development projects in today’s Information Technology (IT industry.

  20. Software Cost Estimation Review

    OpenAIRE

    Ongere, Alphonce

    2013-01-01

    Software cost estimation is the process of predicting the effort, the time and the cost re-quired to complete software project successfully. It involves size measurement of the soft-ware project to be produced, estimating and allocating the effort, drawing the project schedules, and finally, estimating overall cost of the project. Accurate estimation of software project cost is an important factor for business and the welfare of software organization in general. If cost and effort estimat...

  1. Software Partitioning Technologies

    Science.gov (United States)

    2001-05-29

    1 Software Partitioning Technologies Tim Skutt Smiths Aerospace 3290 Patterson Ave. SE Grand Rapids, MI 49512-1991 (616) 241-8645 skutt_timothy...Limitation of Abstract UU Number of Pages 12 2 Agenda n Software Partitioning Overview n Smiths Software Partitioning Technology n Software Partitioning...Partition Level OS Core Module Level OS Timers MMU I/O API Layer Partitioning Services 6 Smiths Software Partitioning Technology n Smiths has developed

  2. Software Engineering Program: Software Process Improvement Guidebook

    Science.gov (United States)

    1996-01-01

    The purpose of this document is to provide experience-based guidance in implementing a software process improvement program in any NASA software development or maintenance community. This guidebook details how to define, operate, and implement a working software process improvement program. It describes the concept of the software process improvement program and its basic organizational components. It then describes the structure, organization, and operation of the software process improvement program, illustrating all these concepts with specific NASA examples. The information presented in the document is derived from the experiences of several NASA software organizations, including the SEL, the SEAL, and the SORCE. Their experiences reflect many of the elements of software process improvement within NASA. This guidebook presents lessons learned in a form usable by anyone considering establishing a software process improvement program within his or her own environment. This guidebook attempts to balance general and detailed information. It provides material general enough to be usable by NASA organizations whose characteristics do not directly match those of the sources of the information and models presented herein. It also keeps the ideas sufficiently close to the sources of the practical experiences that have generated the models and information.

  3. Payload software technology: Software technology development plan

    Science.gov (United States)

    1977-01-01

    Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

  4. Modeling Water Quality in Rivers

    Directory of Open Access Journals (Sweden)

    Liren Yu

    2005-01-01

    Full Text Available This study reports a PC software, used in a Windows-based environment, which was developed based on the first order reaction of Biological Oxygen Demand (BOD and a modified Streeter and Phelps equation, in order to simulate and determine the variations of Dissolved Oxygen (DO and of the BOD along with the studied river reaches. The software considers many impacts of environmental factors, such as the different type of discharges (concentrated or punctual source, tributary contribution, distributed source, nitrogenous BOD, BOD sedimentation, photosynthetic production and benthic demand of oxygen, and so on. The software has been used to model the DO profile along one river, with the aim to improve the water quality through suitable engineering measure.

  5. Pragmatic Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan; Jensen, Rikke Hagensby

    2014-01-01

    We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation...

  6. Reconnaissance of ground-water quality in the Papio-Missouri River Natural Resources District, eastern Nebraska, July through September 1992

    Science.gov (United States)

    Verstraeten, Ingrid M.; Ellis, M.J.

    1995-01-01

    A reconnaissance of ground-water quality was conducted in the Papio-Missouri River Natural Resources District of eastern Nebraska. Sixty-one irrigation, municipal, domestic, and industrial wells completed in the principal aquifers--the unconfined Elkhorn, Missouri, and Platte River Valley alluvial aquifers, the upland area alluvial aquifers, and the Dakota aquifer--were selected for water-quality sampling during July, August, and September 1992. Analyses of water samples from the wells included determination of dissolved nitrate as nitrogen and triazine and acetanilide herbicides. Waterquality analyses of a subset of 42 water samples included dissolved solids, major ions, metals, trace elements, and radionuclides. Concentrations of dissolved nitrate as nitrogen in water samples from 2 of 13 wells completed in the upland area alluvial aquifers exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level for drinking water of 10 milligrams per liter. Thirty-nine percent of the dissolved nitrate-as-nitrogen concentrations were less than the detection level of 0.05 milligram per liter. The largest median dissolved nitrate-as-nitrogen concentrations were in water from the upland area alluvial aquifers and the Dakota aquifer. Water from all principal aquifers, except the Dakota aquifer, had detectable concentrations of herbicides. Herbicides detected included alachlor (1 detection), atrazine (13 detections), cyanazine (5 detections), deisopropylatrazine (6 detections), deethylatrazine (9 detections), metolachlor (6 detections), metribuzin (1 detection), prometon (6 detections), and simazine (2 detections). Herbicide concentrations did not exceed U.S. Environmental Protection Agency Maximum Contaminant Levels for drinking water. In areas where the hydraulic gradient favors loss of surface water to ground water, the detection of herbicides in water from wells along the banks of the Platte River indicates that the river could act as a line source of

  7. Pragmatic Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan; Jensen, Rikke Hagensby

    2014-01-01

    We understand software innovation as concerned with introducing innovation into the development of software intensive systems, i.e. systems in which software development and/or integration are dominant considerations. Innovation is key in almost any strategy for competitiveness in existing markets......, for creating new markets, or for curbing rising public expenses, and software intensive systems are core elements in most such strategies. Software innovation therefore is vital for about every sector of the economy. Changes in software technologies over the last decades have opened up for experimentation......, learning, and flexibility in ongoing software projects, but how can this change be used to facilitate software innovation? How can a team systematically identify and pursue opportunities to create added value in ongoing projects? In this paper, we describe Deweyan pragmatism as the philosophical foundation...

  8. Software Engineering Improvement Plan

    Science.gov (United States)

    2006-01-01

    In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

  9. Paladin Software Support Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Paladin Software Support Environment (SSE) occupies 2,241 square-feet. It contains the hardware and software tools required to support the Paladin Automatic Fire...

  10. ATLAS software packaging

    CERN Document Server

    Rybkin, G

    2012-01-01

    Software packaging is indispensable part of build and prerequisite for deployment processes. Full ATLAS software stack consists of TDAQ, HLT, and Offline software. These software groups depend on some 80 external software packages. We present tools, package PackDist, developed and used to package all this software except for TDAQ project. PackDist is based on and driven by CMT, ATLAS software configuration and build tool, and consists of shell and Python scripts. The packaging unit used is CMT project. Each CMT project is packaged as several packages - platform dependent (one per platform available), source code excluding header files, other platform independent files, documentation, and debug information packages (the last two being built optionally). Packaging can be done recursively to package all the dependencies. The whole set of packages for one software release, distribution kit, also includes configuration packages and contains some 120 packages for one platform. Also packaged are physics analysis pro...

  11. Commercial Data Mining Software

    Science.gov (United States)

    Zhang, Qingyu; Segall, Richard S.

    This chapter discusses selected commercial software for data mining, supercomputing data mining, text mining, and web mining. The selected software are compared with their features and also applied to available data sets. The software for data mining are SAS Enterprise Miner, Megaputer PolyAnalyst 5.0, PASW (formerly SPSS Clementine), IBM Intelligent Miner, and BioDiscovery GeneSight. The software for supercomputing are Avizo by Visualization Science Group and JMP Genomics from SAS Institute. The software for text mining are SAS Text Miner and Megaputer PolyAnalyst 5.0. The software for web mining are Megaputer PolyAnalyst and SPSS Clementine . Background on related literature and software are presented. Screen shots of each of the selected software are presented, as are conclusions and future directions.

  12. Software Testing Requires Variability

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2003-01-01

    Software variability is the ability of a software system or artefact to be changed, customized or configured for use in a particular context. Variability in software systems is important from a number of perspectives. Some perspectives rightly receive much attention due to their direct economic...... impact in software production. As is also apparent from the call for papers these perspectives focus on qualities such as reuse, adaptability, and maintainability....

  13. Software engineer's pocket book

    CERN Document Server

    Tooley, Michael

    2013-01-01

    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

  14. Software Testing Requires Variability

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2003-01-01

    Software variability is the ability of a software system or artefact to be changed, customized or configured for use in a particular context. Variability in software systems is important from a number of perspectives. Some perspectives rightly receive much attention due to their direct economic...... impact in software production. As is also apparent from the call for papers these perspectives focus on qualities such as reuse, adaptability, and maintainability....

  15. Software engineering measurement

    CERN Document Server

    Munson, PhD, John C

    2003-01-01

    By demonstrating how to develop simple experiments for the empirical validation of theoretical research and showing how to convert measurement data into meaningful and valuable information, this text fosters more precise use of software measurement in the computer science and software engineering literature. Software Engineering Measurement shows you how to convert your measurement data to valuable information that can be used immediately for software process improvement.

  16. Software variability management

    NARCIS (Netherlands)

    Bosch, J; Nord, RL

    2004-01-01

    During recent years, the amount of variability that has to be supported by a software artefact is growing considerably and its management is evolving into a major challenge during development, usage, and evolution of software artefacts. Successful management of variability in software leads to

  17. Software Language Evolution

    NARCIS (Netherlands)

    Vermolen, S.D.

    2012-01-01

    Software plays a critical role in our daily life. Vast amounts of money are spent on more and more complex systems. All software, regardless if it controls a plane or the game on your phone is never finished. Software changes when it contains bugs or when new functionality is added. This process of

  18. Software Architecture Evolution

    Science.gov (United States)

    Barnes, Jeffrey M.

    2013-01-01

    Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…

  19. Java for flight software

    Science.gov (United States)

    Benowitz, E.; Niessner, A.

    2003-01-01

    This work involves developing representative mission-critical spacecraft software using the Real-Time Specification for Java (RTSJ). This work currently leverages actual flight software used in the design of actual flight software in the NASA's Deep Space 1 (DSI), which flew in 1998.

  20. Software Language Evolution

    NARCIS (Netherlands)

    Vermolen, S.D.

    2012-01-01

    Software plays a critical role in our daily life. Vast amounts of money are spent on more and more complex systems. All software, regardless if it controls a plane or the game on your phone is never finished. Software changes when it contains bugs or when new functionality is added. This process of

  1. Software Engineering for Portability.

    Science.gov (United States)

    Stanchev, Ivan

    1990-01-01

    Discussion of the portability of educational software focuses on the software design and development process. Topics discussed include levels of portability; the user-computer dialog; software engineering principles; design techniques for student performance records; techniques of courseware programing; and suggestions for further research and…

  2. Software Architecture Evolution

    Science.gov (United States)

    Barnes, Jeffrey M.

    2013-01-01

    Many software systems eventually undergo changes to their basic architectural structure. Such changes may be prompted by new feature requests, new quality attribute requirements, changing technology, or other reasons. Whatever the causes, architecture evolution is commonplace in real-world software projects. Today's software architects, however,…

  3. River nomads

    DEFF Research Database (Denmark)

    2016-01-01

    River nomads is a movie about people on the move. The documentary film explores the lifestyle of a group of nomadic fishermen whose mobility has been the recipe of success and troubles. Engaged in trade and travel, twice a year the river nomads form impressive convoys of majestic pirogues and set...... and liberated lifestyle and the breath-taking landscapes and vistas offered by the Niger River. River Nomads is also a personal account of the Kebbawa’s way of life and their current struggles as nomadic folk living in a world divided by borders and ruled by bureaucrats....

  4. Software Maintenance Success Recipes

    CERN Document Server

    Reifer, Donald J

    2011-01-01

    Dispelling much of the folklore surrounding software maintenance, Software Maintenance Success Recipes identifies actionable formulas for success based on in-depth analysis of more than 200 real-world maintenance projects. It details the set of factors that are usually present when effective software maintenance teams do their work and instructs on the methods required to achieve success. Donald J. Reifer--an award winner for his contributions to the field of software engineering and whose experience includes managing the DoD Software Initiatives Office--provides step-by-step guidance on how t

  5. Funding Research Software Development

    Science.gov (United States)

    Momcheva, Ivelina G.

    2017-01-01

    Astronomical software is used by each and every member of our scientific community. Purpose-build software is becoming ever more critical as we enter the regime of large datasets and simulations of increasing complexity. However, financial investments in building, maintaining and renovating the software infrastructure have been uneven. In this talk I will summarize past and current funding sources for astronomical software development, discuss other models of funding and introduce a new initiative for supporting community software at STScI. The purpose of this talk is to prompt discussion about how we allocate resources to this vital infrastructure.

  6. FLOWTRAN-TF software design

    Energy Technology Data Exchange (ETDEWEB)

    Aleman, S.E.; Flach, G.P.; Hamm, L.L.; Lee, S.Y.; Smith, F.G. III.

    1993-02-01

    FLOWTRAN-TF was created to analyze an individual Mk22 fuel assembly during a large break Loss Of Coolant Accident (LOCA) scenario involving the Savannah River Site K-reactor after the initial few seconds of the transient. During the initial few seconds reactor cooling is limited by the static or Ledinegg flow instability phenomenon. The predecessor FLOWTRAN code was developed to analyze this portion of a LOCA. In the several seconds following the break, a significant fraction of the reactor coolant inventory leaks out the break, Emergency Cooling System (ECS) flow is initiated, and air enters the primary coolant circulation loops. Reactor fuel assemblies are cooled by a low flowrate air-water downflow. Existing commercial nuclear industry thermal-hydraulic codes were judged inadequate for detailed modeling of a Mk22 fuel assembly because the application involves a ribbed annular geometry, low pressure, downflow and an air-water mixture. FLOWTRAN-TF is a two-phase thermal-hydraulics code of similar technology to existing commercial codes such as RELAP and TRAC but customized for Savannah River Site applications. The main features and capabilities of FLOWTRAN-TF are detailed Mk22 fuel assembly ribbed annular geometry; conjugate heat transfer; detailed neutronic power distribution; three-dimensional heat conduction in Mk22 fuel and target tubes; two-dimensional coolant flow in channels (axial, azimuthal); single-phase and/or two-phase fluid (gas, liquid and/or gas-liquid); two-component (air, water); constitutive models applicable to low pressure air-water downflow in ribbed annular channels. The design of FLOWTRAN-TF is described in detail in this report which serves as the Software Design Report in accordance with Quality Assurance Procedure IV-4, Rev. 0 Software Design and Implementation'' in the 1Q34 manual.

  7. FLOWTRAN-TF software design

    Energy Technology Data Exchange (ETDEWEB)

    Aleman, S.E.; Flach, G.P.; Hamm, L.L.; Lee, S.Y.; Smith, F.G. III

    1993-02-01

    FLOWTRAN-TF was created to analyze an individual Mk22 fuel assembly during a large break Loss Of Coolant Accident (LOCA) scenario involving the Savannah River Site K-reactor after the initial few seconds of the transient. During the initial few seconds reactor cooling is limited by the static or Ledinegg flow instability phenomenon. The predecessor FLOWTRAN code was developed to analyze this portion of a LOCA. In the several seconds following the break, a significant fraction of the reactor coolant inventory leaks out the break, Emergency Cooling System (ECS) flow is initiated, and air enters the primary coolant circulation loops. Reactor fuel assemblies are cooled by a low flowrate air-water downflow. Existing commercial nuclear industry thermal-hydraulic codes were judged inadequate for detailed modeling of a Mk22 fuel assembly because the application involves a ribbed annular geometry, low pressure, downflow and an air-water mixture. FLOWTRAN-TF is a two-phase thermal-hydraulics code of similar technology to existing commercial codes such as RELAP and TRAC but customized for Savannah River Site applications. The main features and capabilities of FLOWTRAN-TF are detailed Mk22 fuel assembly ribbed annular geometry; conjugate heat transfer; detailed neutronic power distribution; three-dimensional heat conduction in Mk22 fuel and target tubes; two-dimensional coolant flow in channels (axial, azimuthal); single-phase and/or two-phase fluid (gas, liquid and/or gas-liquid); two-component (air, water); constitutive models applicable to low pressure air-water downflow in ribbed annular channels. The design of FLOWTRAN-TF is described in detail in this report which serves as the Software Design Report in accordance with Quality Assurance Procedure IV-4, Rev. 0 ``Software Design and Implementation`` in the 1Q34 manual.

  8. MACROSCOPIC RIVERS

    NARCIS (Netherlands)

    VANDENBERG, IP

    1991-01-01

    We present a mathematical model for the ''river-phenomenon'': striking concentrations of trajectories of ordinary differential equations. This model of ''macroscopic rivers'' is formulated within nonstandard analysis, and stated in terms of macroscopes and singular perturbations. For a subclass, the

  9. Software Maintenance and Evolution: The Implication for Software ...

    African Journals Online (AJOL)

    PROF. O. E. OSUAGWU

    2013-06-01

    Jun 1, 2013 ... ... the test of time. Keywords: Software, software maintenance, software evolution, reverse engineering, ... area of human endeavour be it automobile, software, etc. at .... greater efficiency and productivity in the maintenance ...

  10. NASA software documentation standard software engineering program

    Science.gov (United States)

    1991-01-01

    The NASA Software Documentation Standard (hereinafter referred to as Standard) can be applied to the documentation of all NASA software. This Standard is limited to documentation format and content requirements. It does not mandate specific management, engineering, or assurance standards or techniques. This Standard defines the format and content of documentation for software acquisition, development, and sustaining engineering. Format requirements address where information shall be recorded and content requirements address what information shall be recorded. This Standard provides a framework to allow consistency of documentation across NASA and visibility into the completeness of project documentation. This basic framework consists of four major sections (or volumes). The Management Plan contains all planning and business aspects of a software project, including engineering and assurance planning. The Product Specification contains all technical engineering information, including software requirements and design. The Assurance and Test Procedures contains all technical assurance information, including Test, Quality Assurance (QA), and Verification and Validation (V&V). The Management, Engineering, and Assurance Reports is the library and/or listing of all project reports.

  11. Software Defined Networking Demands on Software Technologies

    DEFF Research Database (Denmark)

    Galinac Grbac, T.; Caba, Cosmin Marius; Soler, José

    2015-01-01

    Software Defined Networking (SDN) is a networking approach based on a centralized control plane architecture with standardised interfaces between control and data planes. SDN enables fast configuration and reconfiguration of the network to enhance resource utilization and service performances....... This new approach enables a more dynamic and flexible network, which may adapt to user needs and application requirements. To this end, systemized solutions must be implemented in network software, aiming to provide secure network services that meet the required service performance levels. In this paper......, we review this new approach to networking from an architectural point of view, and identify and discuss some critical quality issues that require new developments in software technologies. These issues we discuss along with use case scenarios. Here in this paper we aim to identify challenges...

  12. Trace Software Pipelining

    Institute of Scientific and Technical Information of China (English)

    王剑; AndreasKrall; 等

    1995-01-01

    Global software pipelining is a complex but efficient compilation technique to exploit instruction-level parallelism for loops with branches.This paper presents a novel global software pipelining technique,called Trace Software Pipelining,targeted to the instruction-level parallel processors such as Very Long Instruction Word (VLIW) and superscalar machines.Trace software pipelining applies a global code scheduling technique to compact the original loop body.The resulting loop is called a trace software pipelined (TSP) code.The trace softwrae pipelined code can be directly executed with special architectural support or can be transformed into a globally software pipelined loop for the current VLIW and superscalar processors.Thus,exploiting parallelism across all iterations of a loop can be completed through compacting the original loop body with any global code scheduling technique.This makes our new technique very promising in practical compilers.Finally,we also present the preliminary experimental results to support our new approach.

  13. COTS software selection process.

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, William M. (Strike Wire Technologies, Louisville, CO); Lin, Han Wei; McClelland, Kelly (U.S. Security Associates, Livermore, CA); Ullrich, Rebecca Ann; Khanjenoori, Soheil; Dalton, Karen; Lai, Anh Tri; Kuca, Michal; Pacheco, Sandra; Shaffer-Gant, Jessica

    2006-05-01

    Today's need for rapid software development has generated a great interest in employing Commercial-Off-The-Shelf (COTS) software products as a way of managing cost, developing time, and effort. With an abundance of COTS software packages to choose from, the problem now is how to systematically evaluate, rank, and select a COTS product that best meets the software project requirements and at the same time can leverage off the current corporate information technology architectural environment. This paper describes a systematic process for decision support in evaluating and ranking COTS software. Performed right after the requirements analysis, this process provides the evaluators with more concise, structural, and step-by-step activities for determining the best COTS software product with manageable risk. In addition, the process is presented in phases that are flexible to allow for customization or tailoring to meet various projects' requirements.

  14. Social software in global software development

    DEFF Research Database (Denmark)

    2010-01-01

    Social software (SoSo) is defined by Farkas as tools that (1) allow people to communicate, collaborate, and build community online (2) can be syndicated, shared, reused or remixed and (3) let people learn easily from and capitalize on the behavior and knowledge of others. [1]. SoSo include a wide...... variety of tools such as: instant messaging, internet forums, mailing lists, blogs, wikis, social network sites, social bookmarking, social libraries, virtual worlds. Though normally rather belonging to the private realm, the use of social software in corporate context has been reported, e.g. as a way...

  15. Social software in global software development

    DEFF Research Database (Denmark)

    2010-01-01

    Social software (SoSo) is defined by Farkas as tools that (1) allow people to communicate, collaborate, and build community online (2) can be syndicated, shared, reused or remixed and (3) let people learn easily from and capitalize on the behavior and knowledge of others. [1]. SoSo include a wide...... variety of tools such as: instant messaging, internet forums, mailing lists, blogs, wikis, social network sites, social bookmarking, social libraries, virtual worlds. Though normally rather belonging to the private realm, the use of social software in corporate context has been reported, e.g. as a way...

  16. Software Quality Assurance in Software Projects: A Study of Pakistan

    Directory of Open Access Journals (Sweden)

    Faisal Shafique Butt

    2013-05-01

    Full Text Available Software quality is specific property which tells what kind of standard software should have. In a software project, quality is the key factor of success and decline of software related organization. Many researches have been done regarding software quality. Software related organization follows standards introduced by Capability Maturity Model Integration (CMMI to achieve good quality software. Quality is divided into three main layers which are Software Quality Assurance (SQA, Software Quality Plan (SQP and Software Quality Control (SQC. So In this study, we are discussing the quality standards and principles of software projects in Pakistan software Industry and how these implemented quality standards are measured and managed. In this study, we will see how many software firms are following the rules of CMMI to create software. How many are reaching international standards and how many firms are measuring the quality of their projects. The results show some of the companies are using software quality assurance techniques in Pakstan.

  17. Software engineering the current practice

    CERN Document Server

    Rajlich, Vaclav

    2011-01-01

    INTRODUCTION History of Software EngineeringSoftware PropertiesOrigins of SoftwareBirth of Software EngineeringThird Paradigm: Iterative ApproachSoftware Life Span ModelsStaged ModelVariants of Staged ModelSoftware Technologies Programming Languages and CompilersObject-Oriented TechnologyVersion Control SystemSoftware ModelsClass DiagramsUML Activity DiagramsClass Dependency Graphs and ContractsSOFTWARE CHANGEIntroduction to Software ChangeCharacteristics of Software ChangePhases of Software ChangeRequirements and Their ElicitationRequirements Analysis and Change InitiationConcepts and Concept

  18. Real World Software Engineering

    Science.gov (United States)

    1994-07-15

    semester addresses the remaining principles of a complete, mature software development process [ Humphrey 88]. In order to provide an instructional...Software Innovations Technology, 1083 Mandarin Drive N.E.. Palm Bay FL 32905-4706 [ Humphrey 88] W. S. Humphrey , "Characterizing the Software Process: A...Copies of all the forms mentioned are available via electronic mail from the authors. 40 [1) Doris Carver, "Comparison of Techniques In Project-Based

  19. Software configuration management

    CERN Document Server

    Keyes, Jessica

    2004-01-01

    Software Configuration Management discusses the framework from a standards viewpoint, using the original DoD MIL-STD-973 and EIA-649 standards to describe the elements of configuration management within a software engineering perspective. Divided into two parts, the first section is composed of 14 chapters that explain every facet of configuration management related to software engineering. The second section consists of 25 appendices that contain many valuable real world CM templates.

  20. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  1. Software evolution with XVCL

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stan; Zhang, Hongyu

    2004-01-01

    This chapter introduces software evolution with XVCL (XML-based Variant Configuration Language), which is an XML-based metaprogramming technique. As the software evolves, a large number of variants may arise, especially whtn such kinds of evolutions are related to multiple platforms as shown in our...... case study. Handling variants and tracing the impact of variants across the development lifecycle is a challenge. This chapter shows how we can maintain different versions of software in a reuse-based way....

  2. Software systems for astronomy

    CERN Document Server

    Conrad, Albert R

    2014-01-01

    This book covers the use and development of software for astronomy. It describes the control systems used to point the telescope and operate its cameras and spectrographs, as well as the web-based tools used to plan those observations. In addition, the book also covers the analysis and archiving of astronomical data once it has been acquired. Readers will learn about existing software tools and packages, develop their own software tools, and analyze real data sets.

  3. Lean software development

    OpenAIRE

    Hefnerová, Lucie

    2011-01-01

    The main goal of this bachelor thesis is the emergence of the clear Czech written material concerning the concept of Lean Software Development, which has been gaining significant attention in the field of software development, recently. Another goal of this thesis is to summarize the possible approaches of categorizing the concept and to summarize the possible approaches of defining the relationship between Lean and Agile software development. The detailed categorization of the tools potentia...

  4. Essential software architecture

    CERN Document Server

    Gorton, Ian

    2011-01-01

    Job titles like ""Technical Architect"" and ""Chief Architect"" nowadays abound in software industry, yet many people suspect that ""architecture"" is one of the most overused and least understood terms in professional software development. Gorton's book tries to resolve this dilemma. It concisely describes the essential elements of knowledge and key skills required to be a software architect. The explanations encompass the essentials of architecture thinking, practices, and supporting technologies. They range from a general understanding of structure and quality attributes through technical i

  5. Software Process Improvement Defined

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2002-01-01

    This paper argues in favor of the development of explanatory theory on software process improvement. The last one or two decades commitment to prescriptive approaches in software process improvement theory may contribute to the emergence of a gulf dividing theorists and practitioners....... It is proposed that this divide be met by the development of theory evaluating prescriptive approaches and informing practice with a focus on the software process policymaking and process control aspects of improvement efforts...

  6. Solar Asset Management Software

    Energy Technology Data Exchange (ETDEWEB)

    Iverson, Aaron [Ra Power Management, Inc., Oakland, CA (United States); Zviagin, George [Ra Power Management, Inc., Oakland, CA (United States)

    2016-09-30

    Ra Power Management (RPM) has developed a cloud based software platform that manages the financial and operational functions of third party financed solar projects throughout their lifecycle. RPM’s software streamlines and automates the sales, financing, and management of a portfolio of solar assets. The software helps solar developers automate the most difficult aspects of asset management, leading to increased transparency, efficiency, and reduction in human error. More importantly, our platform will help developers save money by improving their operating margins.

  7. Software evolution and maintenance

    CERN Document Server

    Tripathy, Priyadarshi

    2014-01-01

    Software Evolution and Maintenance: A Practitioner's Approach is an accessible textbook for students and professionals, which collates the advances in software development and provides the most current models and techniques in maintenance.Explains two maintenance standards: IEEE/EIA 1219 and ISO/IEC14764Discusses several commercial reverse and domain engineering toolkitsSlides for instructors are available onlineInformation is based on the IEEE SWEBOK (Software Engineering Body of Knowledge)

  8. Software Architecture Technology Initiative

    Science.gov (United States)

    2008-04-01

    2008 Carnegie Mellon University 2008 PLS March 2008 © 2008 Carnegie Mellon University Software Architecture Technology Initiative SATURN 2008...SUBTITLE Software Architecture Technology Initiative 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT...SUPPLEMENTARY NOTES presented at the SEI Software Architecture Technology User Network (SATURN) Workshop, 30 Apr ? 1 May 2008, Pittsburgh, PA. 14

  9. Gammasphere software development

    Energy Technology Data Exchange (ETDEWEB)

    Piercey, R.B.

    1993-01-01

    Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere).

  10. Parallel Software Model Checking

    Science.gov (United States)

    2015-01-08

    JAN 2015 2. REPORT TYPE N/A 3. DATES COVERED 4. TITLE AND SUBTITLE Parallel Software Model Checking 5a. CONTRACT NUMBER 5b. GRANT NUMBER...AND ADDRESS(ES) Software Engineering Institute Carnegie Mellon University Pittsburgh, PA 15213 8. PERFORMING ORGANIZATION REPORT NUMBER 9...3: ∧ ≥ 10 ∧ ≠ 10 ⇒ : Parallel Software Model Checking Team Members Sagar Chaki, Arie Gurfinkel

  11. Gammasphere software development

    Energy Technology Data Exchange (ETDEWEB)

    Piercey, R.B.

    1993-01-01

    Activities of the nuclear physics group are described. Progress was made in organizing the Gammasphere Software Working Group, establishing a nuclear computing facility, participating in software development at Lawrence Berkeley, developing a common data file format, and adapting the ORNL UPAK software to run at Gammasphere. A universal histogram object was developed that defines a file format and provides for an objective-oriented programming model. An automated liquid nitrogen fill system was developed for Gammasphere (110 Ge detectors comprise the sphere).

  12. Essence: Facilitating Software Innovation

    DEFF Research Database (Denmark)

    Aaen, Ivan

    2008-01-01

      This paper suggests ways to facilitate creativity and innovation in software development. The paper applies four perspectives – Product, Project, Process, and People –to identify an outlook for software innovation. The paper then describes a new facility–Software Innovation Research Lab (SIRL......) – and a new method concept for software innovation – Essence – based on views, modes, and team roles. Finally, the paper reports from an early experiment using SIRL and Essence and identifies further research....

  13. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

  14. Agile software development

    CERN Document Server

    Dingsoyr, Torgeir; Moe, Nils Brede

    2010-01-01

    Agile software development has become an umbrella term for a number of changes in how software developers plan and coordinate their work, how they communicate with customers and external stakeholders, and how software development is organized in small, medium, and large companies, from the telecom and healthcare sectors to games and interactive media. Still, after a decade of research, agile software development is the source of continued debate due to its multifaceted nature and insufficient synthesis of research results. Dingsoyr, Dyba, and Moe now present a comprehensive snapshot of the kno

  15. Software architecture 1

    CERN Document Server

    Oussalah , Mourad Chabane

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural template

  16. Managing Software Process Evolution

    DEFF Research Database (Denmark)

    This book focuses on the design, development, management, governance and application of evolving software processes that are aligned with changing business objectives, such as expansion to new domains or shifting to global production. In the context of an evolving business world, it examines...... essential insights and tips to help readers manage process evolutions. And last but not least, it provides a wealth of examples and cases on how to deal with software evolution in practice. Reflecting these topics, the book is divided into three parts. Part 1 focuses on software business transformation...... the organization and management of (software development) projects and process improvements projects....

  17. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

  18. Software architecture 2

    CERN Document Server

    Oussalah, Mourad Chabanne

    2014-01-01

    Over the past 20 years, software architectures have significantly contributed to the development of complex and distributed systems. Nowadays, it is recognized that one of the critical problems in the design and development of any complex software system is its architecture, i.e. the organization of its architectural elements. Software Architecture presents the software architecture paradigms based on objects, components, services and models, as well as the various architectural techniques and methods, the analysis of architectural qualities, models of representation of architectural templa

  19. MYOB software for dummies

    CERN Document Server

    Curtis, Veechi

    2012-01-01

    Your complete guide to MYOB® AccountRight softwareNow in its seventh edition, MYOB® Software For Dummies walks you through everything you need to know, from starting your MYOB® file from scratch and recording payments and receipts, to tracking profit and analysing sales. This new edition includes all the information you need on the new generation of MYOB® AccountRight software, including the new cloud computing features. Set up MYOB® software - understand how to make it work the first time Keep track of purchases and sales - monitor customer accounts and ensure you get pai

  20. Teaching Social Software with Social Software

    Science.gov (United States)

    Mejias, Ulises

    2006-01-01

    Ulises Mejias examines how social software--information and communications technologies that facilitate the collaboration and exchange of ideas--enables students to participate in distributed research, an approach to learning in which knowledge is collectively constructed and shared. During Fall 2005, Mejias taught a graduate seminar that provided…

  1. ATLAS software packaging

    Science.gov (United States)

    Rybkin, Grigory

    2012-12-01

    Software packaging is indispensable part of build and prerequisite for deployment processes. Full ATLAS software stack consists of TDAQ, HLT, and Offline software. These software groups depend on some 80 external software packages. We present tools, package PackDist, developed and used to package all this software except for TDAQ project. PackDist is based on and driven by CMT, ATLAS software configuration and build tool, and consists of shell and Python scripts. The packaging unit used is CMT project. Each CMT project is packaged as several packages—platform dependent (one per platform available), source code excluding header files, other platform independent files, documentation, and debug information packages (the last two being built optionally). Packaging can be done recursively to package all the dependencies. The whole set of packages for one software release, distribution kit, also includes configuration packages and contains some 120 packages for one platform. Also packaged are physics analysis projects (currently 6) used by particular physics groups on top of the full release. The tools provide an installation test for the full distribution kit. Packaging is done in two formats for use with the Pacman and RPM package managers. The tools are functional on the platforms supported by ATLAS—GNU/Linux and Mac OS X. The packaged software is used for software deployment on all ATLAS computing resources from the detector and trigger computing farms, collaboration laboratories computing centres, grid sites, to physicist laptops, and CERN VMFS and covers the use cases of running all applications as well as of software development.

  2. RiverML: Standardizing the Communication of River Model Data (Invited)

    Science.gov (United States)

    Jackson, S.; Maidment, D. R.; Arctur, D. K.

    2013-12-01

    RiverML is a proposed language for conveying a description of river channel and floodplain geometry and flow characteristics through the internet in a standardized way. A key goal of the RiverML project is to allow interoperability between all hydraulic and hydrologic models, whether they are industry standard software packages or custom-built research tools. By providing a common transfer format for common model inputs and outputs, RiverML can shorten the development time and enhance the immediate utility of innovative river modeling tools. RiverML will provide descriptions of cross sections and multiple flow lines, allowing the construction of wireframe representations. In addition, RiverML will support descriptions of network connectivity, properties such as roughness coefficients, and time series observations such as water surface elevation and flow rate. The language is constructed in a modular fashion such that the geometry information, network information, and time series observations can be communicated independently of each other, allowing an arbitrary suite of software packages to contribute to a coherently modeled scenario. Funding for the development of RiverML is provided through an NSF grant to CUAHSI HydroShare project, a web-based collaborative environment for sharing data & models. While RiverML is geared toward the transfer of data, HydroShare will serve as a repository for storing water-related data and models of any format, while providing enhanced functionality for standardized formats such as RiverML, WaterML, and shapefiles. RiverML is a joint effort between the CUAHSI HydroShare development team, the Open Geospatial Consortium (OGC) Hydrology Domain Working Group, and an international community of data providers, data users, and software developers.

  3. Software for multistate analysis

    NARCIS (Netherlands)

    Willekens, Frans; Putter, H.

    2014-01-01

    Background: The growing interest in pathways, the increased availability of life-history data, innovations in statistical and demographic techniques, and advances in software technology have stimulated the development of software packages for multistate modeling of life histories. Objective: In the

  4. Software for multistate analysis

    NARCIS (Netherlands)

    Willekens, Frans; Putter, H.

    2014-01-01

    Background: The growing interest in pathways, the increased availability of life-history data, innovations in statistical and demographic techniques, and advances in software technology have stimulated the development of software packages for multistate modeling of life histories.Objective: In the

  5. Software evolution with XVCL

    DEFF Research Database (Denmark)

    Zhang, Weishan; Jarzabek, Stan; Zhang, Hongyu

    2004-01-01

    This chapter introduces software evolution with XVCL (XML-based Variant Configuration Language), which is an XML-based metaprogramming technique. As the software evolves, a large number of variants may arise, especially whtn such kinds of evolutions are related to multiple platforms as shown in o...

  6. Software Project Management

    Science.gov (United States)

    1989-07-01

    on software management obstacles and ways Chakrabarty, which held that genetically altered to cope with them are presented. Standardization is... algorith - MacProject89 mic models used to estimate software costs (SLIM, MacProject 11. Claris Corp., Mountain View, Calif., COCOMO, Function Points

  7. Software Quality Metrics

    Science.gov (United States)

    1991-07-01

    March 1979, pp. 121-128. Gorla, Narasimhaiah, Alan C. Benander, and Barbara A. Benander, "Debugging Effort Estimation Using Software Metrics", IEEE...Society, IEEE Guide for the Use of IEEE Standard Dictionary of Measures to Produce Reliable Software, IEEE Std 982.2-1988, June 1989. Jones, Capers

  8. Software Engineering Education Directory

    Science.gov (United States)

    1989-02-01

    The C Programming Language by Kernighan, Brian W. and Ritchie, Dennis M. Compilers: C Computers: NCR Tower 32/600 running UNIX System V...Sun Microsystems, Ada Eiffel 3B2) Software Testing CS 429 U P E O 10 Textbooks: Software Testing Techniques by Beizer, Boris Systems

  9. Marketing Mix del Software.

    Directory of Open Access Journals (Sweden)

    Yudith del Carmen Rodríguez Pérez

    2006-03-01

    Por ello, en este trabajo se define el concepto de producto software, se caracteriza al mismo y se exponen sus atributos de calidad. Además, se aborda la mezcla de marketing del software necesaria y diferente a la de otros productos para que este triunfe en el mercado.

  10. Software engineering ethics

    Science.gov (United States)

    Bown, Rodney L.

    1991-01-01

    Software engineering ethics is reviewed. The following subject areas are covered: lack of a system viewpoint; arrogance of PC DOS software vendors; violation od upward compatibility; internet worm; internet worm revisited; student cheating and company hiring interviews; computing practitioners and the commodity market; new projects and old programming languages; schedule and budget; and recent public domain comments.

  11. Software Assurance Competency Model

    Science.gov (United States)

    2013-03-01

    2010a]: Application of technologies and processes to achieve a required level of confidence that software systems and services function in the...for specific projects. L5: Analyze assurance technologies and contribute to the development of new ones. Assured Software Development L1

  12. Threats to Bitcoin Software

    OpenAIRE

    Kateraas, Christian H

    2014-01-01

    Collect and analyse threat models to the Bitcoin ecosystem and its software. The create misuse case, attack trees, and sequence diagrams of the threats. Create a malicious client from the gathered threat models. Once the development of the client is complete, test the client and evaluate its performance. From this, assess the security of the Bitcoin software.

  13. Software cost estimation

    NARCIS (Netherlands)

    Heemstra, F.J.

    1992-01-01

    The paper gives an overview of the state of the art of software cost estimation (SCE). The main questions to be answered in the paper are: (1) What are the reasons for overruns of budgets and planned durations? (2) What are the prerequisites for estimating? (3) How can software development effort be

  14. Cactus: Software Priorities

    Science.gov (United States)

    Hyde, Hartley

    2009-01-01

    The early eighties saw a period of rapid change in computing and teachers lost control of how they used computers in their classrooms. Software companies produced computer tools that looked so good that teachers forgot about writing their own classroom materials and happily purchased software--that offered much more than teachers needed--from…

  15. Selecting the Right Software.

    Science.gov (United States)

    Shearn, Joseph

    1987-01-01

    Selection of administrative software requires analyzing present needs and, to meet future needs, choosing software that will function with a more powerful computer system. Other important factors to include are a professional system demonstration, maintenance and training, and financial considerations that allow leasing or renting alternatives.…

  16. Systematic Software Development

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Méndez Fernández, Daniel

    2015-01-01

    The speed of innovation and the global allocation of resources to accelerate development or to reduce cost put pressure on the software industry. In the global competition, especially so-called high-price countries have to present arguments why the higher development cost is justified and what...... makes these countries an attractive host for software companies. Often, high-quality engineering and excellent quality of products, e.g., machinery and equipment, are mentioned. Yet, the question is: Can such arguments be also found for the software industry? We aim at investigating the degree...... of professionalism and systematization of software development to draw a map of strengths and weaknesses. To this end, we conducted as a first step an exploratory survey in Germany, presented in this paper. In this survey, we focused on the perceived importance of the two general software engineering process areas...

  17. Software architecture evolution

    DEFF Research Database (Denmark)

    Barais, Olivier; Le Meur, Anne-Francoise; Duchien, Laurence

    2008-01-01

    Software architectures must frequently evolve to cope with changing requirements, and this evolution often implies integrating new concerns. Unfortunately, when the new concerns are crosscutting, existing architecture description languages provide little or no support for this kind of evolution....... The software architect must modify multiple elements of the architecture manually, which risks introducing inconsistencies. This chapter provides an overview, comparison and detailed treatment of the various state-of-the-art approaches to describing and evolving software architectures. Furthermore, we discuss...... one particular framework named Tran SAT, which addresses the above problems of software architecture evolution. Tran SAT provides a new element in the software architecture descriptions language, called an architectural aspect, for describing new concerns and their integration into an existing...

  18. Software quality in 1997

    Energy Technology Data Exchange (ETDEWEB)

    Jones, C. [Software Productivity Research, Inc., Burlington, MA (United States)

    1997-11-01

    For many years, software quality assurance lagged behind hardware quality assurance in terms of methods, metrics, and successful results. New approaches such as Quality Function Deployment (QFD) the ISO 9000-9004 standards, the SEI maturity levels, and Total Quality Management (TQM) are starting to attract wide attention, and in some cases to bring software quality levels up to a parity with manufacturing quality levels. Since software is on the critical path for many engineered products, and for internal business systems as well, the new approaches are starting to affect global competition and attract widespread international interest. It can be hypothesized that success in mastering software quality will be a key strategy for dominating global software markets in the 21st century.

  19. Revisiting software ecosystems research

    DEFF Research Database (Denmark)

    Manikas, Konstantinos

    2016-01-01

    Software ecosystems’ is argued to first appear as a concept more than 10 years ago and software ecosystem research started to take off in 2010. We conduct a systematic literature study, based on the most extensive literature review in the field up to date, with two primarily aims: (a) to provide...... an updated overview of the field and (b) to document evolution in the field. In total, we analyze 231 papers from 2007 until 2014 and provide an overview of the research in software ecosystems. Our analysis reveals a field that is rapidly growing both in volume and empirical focus while becoming more mature...... from evolving. We propose means for future research and the community to address them. Finally, our analysis shapes the view of the field having evolved outside the existing definitions of software ecosystems and thus propose the update of the definition of software ecosystems....

  20. Software Requirements Management

    Directory of Open Access Journals (Sweden)

    Ali Altalbe

    2015-04-01

    Full Text Available Requirements are defined as the desired set of characteristics of a product or a service. In the world of software development, it is estimated that more than half of the failures are attributed towards poor requirements management. This means that although the software functions correctly, it is not what the client requested. Modern software requirements management methodologies are available to reduce the occur-rence of such incidents. This paper performs a review on the available literature in the area while tabulating possible methods of managing requirements. It also highlights the benefits of following a proper guideline for the requirements management task. With the introduction of specific software tools for the requirements management task, better software products are now been developed with lesser resources.

  1. Software licenses: Stay honest!

    CERN Document Server

    Computer Security Team

    2012-01-01

    Do you recall our article about copyright violation in the last issue of the CERN Bulletin, “Music, videos and the risk for CERN”? Now let’s be more precise. “Violating copyright” not only means the illegal download of music and videos, it also applies to software packages and applications.   Users must respect proprietary rights in compliance with the CERN Computing Rules (OC5). Not having legitimately obtained a program or the required licenses to run that software is not a minor offense. It violates CERN rules and puts the Organization at risk! Vendors deserve credit and compensation. Therefore, make sure that you have the right to use their software. In other words, you have bought the software via legitimate channels and use a valid and honestly obtained license. This also applies to “Shareware” and software under open licenses, which might also come with a cost. Usually, only “Freeware” is complete...

  2. Software safety hazard analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence, J.D. [Lawrence Livermore National Lab., CA (United States)

    1996-02-01

    Techniques for analyzing the safety and reliability of analog-based electronic protection systems that serve to mitigate hazards in process control systems have been developed over many years, and are reasonably well understood. An example is the protection system in a nuclear power plant. The extension of these techniques to systems which include digital computers is not well developed, and there is little consensus among software engineering experts and safety experts on how to analyze such systems. One possible technique is to extend hazard analysis to include digital computer-based systems. Software is frequently overlooked during system hazard analyses, but this is unacceptable when the software is in control of a potentially hazardous operation. In such cases, hazard analysis should be extended to fully cover the software. A method for performing software hazard analysis is proposed in this paper.

  3. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  4. DIVERSIFICATION IN SOFTWARE ENGINEERING

    Directory of Open Access Journals (Sweden)

    Er.Kirtesh Jailia,

    2010-06-01

    Full Text Available In this paper we examine the factors that have promoted the iversification of software process models. The intention is to understand more clearly the problem-solving process in software engineering & try to find out the efficient way to manage the risk. A review of software process modeling is given first, followed by a discussion of process evaluation techniques. A taxonomy for categorizing process models, based on establishing decision criteria,is identified that can guide selecting the appropriate model from a set of alternatives on the basis of model characteristics and software project needs. We are proposing a model in this paper, for dealing with the diversification in software engineering.

  5. Trends in software testing

    CERN Document Server

    Mohanty, J; Balakrishnan, Arunkumar

    2017-01-01

    This book is focused on the advancements in the field of software testing and the innovative practices that the industry is adopting. Considering the widely varied nature of software testing, the book addresses contemporary aspects that are important for both academia and industry. There are dedicated chapters on seamless high-efficiency frameworks, automation on regression testing, software by search, and system evolution management. There are a host of mathematical models that are promising for software quality improvement by model-based testing. There are three chapters addressing this concern. Students and researchers in particular will find these chapters useful for their mathematical strength and rigor. Other topics covered include uncertainty in testing, software security testing, testing as a service, test technical debt (or test debt), disruption caused by digital advancement (social media, cloud computing, mobile application and data analytics), and challenges and benefits of outsourcing. The book w...

  6. AUTOMATED SOFTWARE DISTRIBUTION

    Directory of Open Access Journals (Sweden)

    J.J. Strasheim

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Automated distribution of computer software via electronic means in large corporate networks is growing in popularity. The relative importance of personal computer software, in financial and logistical terms, is described and the developing need for automated software distribution explained. An actual comparitive example of alternative software distribution strategies is presented and discussed proving the viability of Electronic Software Distribution.

    AFRIKAANSE OPSOMMING: Geoutomatiseerde verspreiding van rekenaarprogrammatuur met behulp van elektroniese metodes in groot korporatiewe netwerke, is toenemend populer, Die relatiewe belangrikheid van persoonlike rekenaarprogrammatuur in finansiele en logistieke terme word bespreek en die groeiende behoefte na geoutomatiseerde programmatuurverspreiding verduidelik. 'n Werklike vergelykende voorbeeld van alternatiewe programmatuurverspreidingsstrategiee word aangebied en bespreek wat die lewensvatbaarheid van Elektroniese Programmatuurverspreiding bewys.

  7. Developing Software Simulations

    Directory of Open Access Journals (Sweden)

    Tom Hall

    2007-06-01

    Full Text Available Programs in education and business often require learners to develop and demonstrate competence in specified areas and then be able to effectively apply this knowledge. One method to aid in developing a skill set in these areas is through the use of software simulations. These simulations can be used for learner demonstrations of competencies in a specified course as well as a review of the basic skills at the beginning of subsequent courses. The first section of this paper discusses ToolBook, the software used to develop our software simulations. The second section discusses the process of developing software simulations. The third part discusses how we have used software simulations to assess student knowledge of research design by providing simulations that allow the student to practice using SPSS and Excel.

  8. Scientific Software Component Technology

    Energy Technology Data Exchange (ETDEWEB)

    Kohn, S.; Dykman, N.; Kumfert, G.; Smolinski, B.

    2000-02-16

    We are developing new software component technology for high-performance parallel scientific computing to address issues of complexity, re-use, and interoperability for laboratory software. Component technology enables cross-project code re-use, reduces software development costs, and provides additional simulation capabilities for massively parallel laboratory application codes. The success of our approach will be measured by its impact on DOE mathematical and scientific software efforts. Thus, we are collaborating closely with library developers and application scientists in the Common Component Architecture forum, the Equation Solver Interface forum, and other DOE mathematical software groups to gather requirements, write and adopt a variety of design specifications, and develop demonstration projects to validate our approach. Numerical simulation is essential to the science mission at the laboratory. However, it is becoming increasingly difficult to manage the complexity of modern simulation software. Computational scientists develop complex, three-dimensional, massively parallel, full-physics simulations that require the integration of diverse software packages written by outside development teams. Currently, the integration of a new software package, such as a new linear solver library, can require several months of effort. Current industry component technologies such as CORBA, JavaBeans, and COM have all been used successfully in the business domain to reduce software development costs and increase software quality. However, these existing industry component infrastructures will not scale to support massively parallel applications in science and engineering. In particular, they do not address issues related to high-performance parallel computing on ASCI-class machines, such as fast in-process connections between components, language interoperability for scientific languages such as Fortran, parallel data redistribution between components, and massively

  9. Computer Software for Forestry Technology Curricula. Final Report.

    Science.gov (United States)

    Watson, Roy C.; Scobie, Walter R.

    Since microcomputers are being used more and more frequently in the forest products industry in the Pacific Northwest, Green River Community College conducted a project to search for BASIC language computer programs pertaining to forestry, and when possible, to adapt such software for use in teaching forestry technology. The search for applicable…

  10. Assessing SWOT discharge algorithms performance across a range of river types

    Science.gov (United States)

    Durand, M. T.; Smith, L. C.; Gleason, C. J.; Bjerklie, D. M.; Garambois, P. A.; Roux, H.

    2014-12-01

    Scheduled for launch in 2020, the Surface Water and Ocean Topography (SWOT) satellite mission will measure river height, width, and slope, globally, as well as characterizing storage change in lakes, and ocean surface dynamics. Four discharge algorithms have been formulated to solve the inverse problem of river discharge from SWOT observations. Three of these approaches are based on Manning's equation, while the fourth utilizes at-many-stations hydraulic geometry relating width and discharge. In all cases, SWOT will provide some but not all of the information required to estimate discharge. The focus of the inverse approaches is estimation of the unknown parameters. The algorithms use a range of a priori information. This paper will generate synthetic measurements of height, width, and slope for a number of rivers, including reaches of the Sacramento, Ohio, Mississippi, Platte, Amazon, Garonne, Po, Severn, St. Lawrence, and Tanana. These rivers have a wide range of flows, geometries, hydraulic regimes, floodplain interactions, and planforms. One-year synthetic datasets will be generated in each case. We will add white noise to the simulated quantities and generate scenarios with different repeat time. The focus will be on retrievability of the hydraulic parameters across a range of space-time sampling, rather than on ability to retrieve under the specific SWOT orbit. We will focus on several specific research questions affecting algorithm performance, including river characteristics, temporal sampling, and algorithm accuracy. The overall goal is to be able to predict which algorithms will work better for different kinds of rivers, and potentially to combine the outputs of the various algorithms to obtain more robust estimates. Preliminary results on the Sacramento River indicate that all algorithms perform well for this single-channel river, with diffusive hydraulics, with relative RMSE values ranging from 9% to 26% for the various algorithms. Preliminary

  11. Global Software Engineering

    DEFF Research Database (Denmark)

    Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

    2016-01-01

    SOFTWARE, LIKE ALL industry products, is the result of complex multinational supply chains with many partners from concept to development to production and maintenance. Global software engineering (GSE), IT outsourcing, and business process outsourcing during the past decade have showed growth...... rates of 10 to 20 percent per year. This instalment of Practitioner’s Digest summarizes experiences and guidance from industry to facilitate knowledge and technology transfer for GSE. It’s based on industry feedback from the annual IEEE International Conference on Global Software Engineering, which had...

  12. Management systems and software.

    Science.gov (United States)

    Levin, R P

    2001-02-01

    To ensure that your software optimizes your practice management systems, design systems that allow you and your team to achieve your goals and provide high levels of quality dentistry and customer service to your patients. Then use your current software system or purchase a new practice management software program that will allow your practice to operate within the guidelines of the systems which you have established. You can be certain that taking these steps will allow you to practice dentistry with maximum profitability and minimum stress for the remainder of your career.

  13. Advanced fingerprint verification software

    Science.gov (United States)

    Baradarani, A.; Taylor, J. R. B.; Severin, F.; Maev, R. Gr.

    2016-05-01

    We have developed a fingerprint software package that can be used in a wide range of applications from law enforcement to public and private security systems, and to personal devices such as laptops, vehicles, and door- locks. The software and processing units are a unique implementation of new and sophisticated algorithms that compete with the current best systems in the world. Development of the software package has been in line with the third generation of our ultrasonic fingerprinting machine1. Solid and robust performance is achieved in the presence of misplaced and low quality fingerprints.

  14. Software takes command

    CERN Document Server

    Manovich, Lev

    2013-01-01

    Software has replaced a diverse array of physical, mechanical, and electronic technologies used before 21st century to create, store, distribute and interact with cultural artifacts. It has become our interface to the world, to others, to our memory and our imagination - a universal language through which the world speaks, and a universal engine on which the world runs. What electricity and combustion engine were to the early 20th century, software is to the early 21st century. Offering the the first theoretical and historical account of software for media authoring and its effects on the prac

  15. CNEOST Control Software System

    Science.gov (United States)

    Wang, X.; Zhao, H. B.; Xia, Y.; Lu, H.; Li, B.

    2015-03-01

    In 2013, CNEOST (China Near Earth Object Survey Telescope) adapted its hardware system for the new CCD camera. Based on the new system architecture, the control software is re-designed and implemented. The software system adopts the message passing mechanism via WebSocket protocol, and improves its flexibility, expansibility, and scalability. The user interface with responsive web design realizes the remote operating under both desktop and mobile devices. The stable operating of software system has greatly enhanced the operation efficiency while reducing the complexity, and has also made a successful attempt for the future system design of telescope and telescope cloud.

  16. Speakeasy software development

    Science.gov (United States)

    Baskinger, Patricia J.; Ozarow, Larry; Chruscicki, Mary C.

    1993-08-01

    The Speakeasy Software Development Project had three primary objectives. The first objective was to perform Independent Verification and Validation (IV & V) of the software and documentation associated with the signal processor being developed by Hazeltine and TRW under the Speakeasy program. The IV & V task also included an analysis and assessment of the ability of the signal processor software to provide LPI communications functions. The second objective was to assist in the enhancement and modification of an existing Rome Lab signal processor workstation. Finally, TASC developed project management support tools and provided program management support to the Speakeasy Program Office.

  17. Error Free Software

    Science.gov (United States)

    1985-01-01

    A mathematical theory for development of "higher order" software to catch computer mistakes resulted from a Johnson Space Center contract for Apollo spacecraft navigation. Two women who were involved in the project formed Higher Order Software, Inc. to develop and market the system of error analysis and correction. They designed software which is logically error-free, which, in one instance, was found to increase productivity by 600%. USE.IT defines its objectives using AXES -- a user can write in English and the system converts to computer languages. It is employed by several large corporations.

  18. Guide to software export

    CERN Document Server

    Philips, Roger A

    2014-01-01

    An ideal reference source for CEOs, marketing and sales managers, sales consultants, and students of international marketing, Guide to Software Export provides a step-by-step approach to initiating or expanding international software sales. It teaches you how to examine critically your candidate product for exportability; how to find distributors, agents, and resellers abroad; how to identify the best distribution structure for export; and much, much more!Not content with providing just the guidelines for setting up, expanding, and managing your international sales channels, Guide to Software

  19. Software quality assurance handbook

    Energy Technology Data Exchange (ETDEWEB)

    1990-09-01

    There are two important reasons for Software Quality Assurance (SQA) at Allied-Signal Inc., Kansas City Division (KCD): First, the benefits from SQA make good business sense. Second, the Department of Energy has requested SQA. This handbook is one of the first steps in a plant-wide implementation of Software Quality Assurance at KCD. The handbook has two main purposes. The first is to provide information that you will need to perform software quality assurance activities. The second is to provide a common thread to unify the approach to SQA at KCD. 2 figs.

  20. Calidad de componentes software

    OpenAIRE

    2010-01-01

    En los últimos años se constata una tendencia creciente por parte de las organizaciones a desarrollar sus sistemas software mediante la combinación de componentes, en lugar de desarrollar dichos sistemas partiendo de cero. Esta tendencia es debida a varios factores. Entre ellos cabe destacar: la necesidad de las organizaciones de reducir los costes y el tiempo dedicados al desarrollo de los sistemas software; el crecimiento del mercado de componentes software; la reducción de la distancia ent...

  1. Beginning software engineering

    CERN Document Server

    Stephens, Rod

    2015-01-01

    Beginning Software Engineering demystifies the software engineering methodologies and techniques that professional developers use to design and build robust, efficient, and consistently reliable software. Free of jargon and assuming no previous programming, development, or management experience, this accessible guide explains important concepts and techniques that can be applied to any programming language. Each chapter ends with exercises that let you test your understanding and help you elaborate on the chapter's main concepts. Everything you need to understand waterfall, Sashimi, agile, RAD, Scrum, Kanban, Extreme Programming, and many other development models is inside!

  2. "IBSAR" Software 4.0

    Directory of Open Access Journals (Sweden)

    2004-06-01

    Full Text Available A review for Arabic software entitled "IBSAR" software assigned to help blinds in usage of the computer, the software pronounces the commands and the contents of screens and applications browsed by users, this review includes general introduction about the software, the components and commands of the software , system requirements , and its functions with Windows operating system and Microsoft Word.

  3. A Novel Software Evolution Model Based on Software Networks

    Science.gov (United States)

    Pan, Weifeng; Li, Bing; Ma, Yutao; Liu, Jing

    Many published papers analyzed the forming mechanisms and evolution laws of OO software systems from software reuse, software pattern, etc. There, however, have been fewer models so far merely built on the software components such as methods, classes, etc. and their interactions. In this paper, a novel Software Evolution Model based on Software Networks (called SEM-SN) is proposed. It uses software network at class level to represent software systems, and uses software network’s dynamical generating process to simulate activities in real software development process such as new classes’ dynamical creations and their dynamical interactions with already existing classes. It also introduces the concept of node/edge ageing to describe the decaying of classes with time. Empirical results on eight open-source Object-Oriented (OO) software systems demonstrate that SCM-SN roughly describes the evolution process of software systems and the emergence of their complex network characteristics.

  4. Project Portfolio Management Software

    OpenAIRE

    Paul POCATILU

    2006-01-01

    In order to design a methodology for the development of project portfolio management (PPM) applications, the existing applications have to be studied. This paper describes the main characteristics of the leading project portfolio management software applications.

  5. Project Portfolio Management Software

    Directory of Open Access Journals (Sweden)

    Paul POCATILU

    2006-01-01

    Full Text Available In order to design a methodology for the development of project portfolio management (PPM applications, the existing applications have to be studied. This paper describes the main characteristics of the leading project portfolio management software applications.

  6. Test af Software

    DEFF Research Database (Denmark)

    Dette dokument udgør slutrapporten for netværkssamarbejdet ”Testnet”, som er udført i perioden 1.4.2006 til 31.12.2008. Netværket beskæftiger sig navnlig med emner inden for test af indlejret og teknisk software, men et antal eksempler på problemstillinger og løsninger forbundet med test af...... administrativ software indgår også. Rapporten er opdelt i følgende 3 dele: Overblik. Her giver vi et resumé af netværkets formål, aktiviteter og resultater. State of the art af software test ridses op. Vi omtaler, at CISS og netværket tager nye tiltag. Netværket. Formål, deltagere og behandlede emner på ti...... række danske software-, elektronik- og IT-virksomheder....

  7. Tier2 Submit Software

    Science.gov (United States)

    Download this tool for Windows or Mac, which helps facilities prepare a Tier II electronic chemical inventory report. The data can also be exported into the CAMEOfm (Computer-Aided Management of Emergency Operations) emergency planning software.

  8. ACS: ALMA Common Software

    Science.gov (United States)

    Chiozzi, Gianluca; Šekoranja, Matej

    2013-02-01

    ALMA Common Software (ACS) provides a software infrastructure common to all ALMA partners and consists of a documented collection of common patterns and components which implement those patterns. The heart of ACS is based on a distributed Component-Container model, with ACS Components implemented as CORBA objects in any of the supported programming languages. ACS provides common CORBA-based services such as logging, error and alarm management, configuration database and lifecycle management. Although designed for ALMA, ACS can and is being used in other control systems and distributed software projects, since it implements proven design patterns using state of the art, reliable technology. It also allows, through the use of well-known standard constructs and components, that other team members whom are not authors of ACS easily understand the architecture of software modules, making maintenance affordable even on a very large project.

  9. Spreadsheet Auditing Software

    CERN Document Server

    Nixon, David

    2010-01-01

    It is now widely accepted that errors in spreadsheets are both common and potentially dangerous. Further research has taken place to investigate how frequently these errors occur, what impact they have, how the risk of spreadsheet errors can be reduced by following spreadsheet design guidelines and methodologies, and how effective auditing of a spreadsheet is in the detection of these errors. However, little research exists to establish the usefulness of software tools in the auditing of spreadsheets. This paper documents and tests office software tools designed to assist in the audit of spreadsheets. The test was designed to identify the success of software tools in detecting different types of errors, to identify how the software tools assist the auditor and to determine the usefulness of the tools.

  10. Test af Software

    DEFF Research Database (Denmark)

    Dette dokument udgør slutrapporten for netværkssamarbejdet ”Testnet”, som er udført i perioden 1.4.2006 til 31.12.2008. Netværket beskæftiger sig navnlig med emner inden for test af indlejret og teknisk software, men et antal eksempler på problemstillinger og løsninger forbundet med test af...... administrativ software indgår også. Rapporten er opdelt i følgende 3 dele: Overblik. Her giver vi et resumé af netværkets formål, aktiviteter og resultater. State of the art af software test ridses op. Vi omtaler, at CISS og netværket tager nye tiltag. Netværket. Formål, deltagere og behandlede emner på ti...... række danske software-, elektronik- og IT-virksomheder....

  11. Software For Genetic Algorithms

    Science.gov (United States)

    Wang, Lui; Bayer, Steve E.

    1992-01-01

    SPLICER computer program is genetic-algorithm software tool used to solve search and optimization problems. Provides underlying framework and structure for building genetic-algorithm application program. Written in Think C.

  12. Computer Center: Software Review.

    Science.gov (United States)

    Duhrkopf, Richard, Ed.; Belshe, John F., Ed.

    1988-01-01

    Reviews a software package, "Mitosis-Meiosis," available for Apple II or IBM computers with colorgraphics capabilities. Describes the documentation, presentation and flexibility of the program. Rates the program based on graphics and usability in a biology classroom. (CW)

  13. Error-Free Software

    Science.gov (United States)

    1989-01-01

    001 is an integrated tool suited for automatically developing ultra reliable models, simulations and software systems. Developed and marketed by Hamilton Technologies, Inc. (HTI), it has been applied in engineering, manufacturing, banking and software tools development. The software provides the ability to simplify the complex. A system developed with 001 can be a prototype or fully developed with production quality code. It is free of interface errors, consistent, logically complete and has no data or control flow errors. Systems can be designed, developed and maintained with maximum productivity. Margaret Hamilton, President of Hamilton Technologies, also directed the research and development of USE.IT, an earlier product which was the first computer aided software engineering product in the industry to concentrate on automatically supporting the development of an ultrareliable system throughout its life cycle. Both products originated in NASA technology developed under a Johnson Space Center contract.

  14. Collaborative software development

    NARCIS (Netherlands)

    Jonge, M. de; Visser, E.; Visser, J.M.W.

    2001-01-01

    We present an approach to collaborative software development where obtaining components and contributing components across organizational boundaries are explicit phases in the development process. A lightweight generative infrastructure supports this approach with an online package base, and several

  15. Core Flight Software Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The mission of the CFS project is to provide reusable software in support of human space exploration programs.   The top-level technical approach to...

  16. TMT common software update

    Science.gov (United States)

    Gillies, Kim; Brighton, Allan; Buur, Hanne

    2016-08-01

    TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their functional roles in the software system. TMT CSW has recently passed its preliminary design review. The unique features of CSW include its use of multiple, open-source products as the basis for services, and an approach that works to reduce the amount of CSW-provided infrastructure code. Considerable prototyping was completed during this phase to mitigate risk with results that demonstrate the validity of this design approach and the selected service implementation products. This paper describes the latest design of TMT CSW, key features, and results from the prototyping effort.

  17. Advanced Software Protection Now

    CERN Document Server

    Bendersky, Diego; Notarfrancesco, Luciano; Sarraute, Carlos; Waissbein, Ariel

    2010-01-01

    Software digital rights management is a pressing need for the software development industry which remains, as no practical solutions have been acclamaimed succesful by the industry. We introduce a novel software-protection method, fully implemented with today's technologies, that provides traitor tracing and license enforcement and requires no additional hardware nor inter-connectivity. Our work benefits from the use of secure triggers, a cryptographic primitive that is secure assuming the existence of an ind-cpa secure block cipher. Using our framework, developers may insert license checks and fingerprints, and obfuscate the code using secure triggers. As a result, this rises the cost that software analysis tools have detect and modify protection mechanisms. Thus rising the complexity of cracking this system.

  18. Banking Software Applications Security

    Directory of Open Access Journals (Sweden)

    Ioan Alexandru Bubu

    2015-03-01

    Full Text Available Computer software products are among the most complex artifacts, if not the most complex artifacts mankind has created. Securing those artifacts against intelligent attackers who try to exploit flaws in software design and construct is a great challenge too.The purpose of this paper is to introduce a secure alternative to banking software applications that are currently in use. This new application aims to cover most of the well-known vulnerabilities that plague the majority of current software.First we will take a quick look at current security methods that are in use, and a few known vulnerabilities. After this, we will discuss the security measures implemented in my application, and finally, we will the results of implementing them.

  19. Software citation principles

    Directory of Open Access Journals (Sweden)

    Arfon M. Smith

    2016-09-01

    Full Text Available Software is a critical part of modern research and yet there is little support across the scholarly ecosystem for its acknowledgement and citation. Inspired by the activities of the FORCE11 working group focused on data citation, this document summarizes the recommendations of the FORCE11 Software Citation Working Group and its activities between June 2015 and April 2016. Based on a review of existing community practices, the goal of the working group was to produce a consolidated set of citation principles that may encourage broad adoption of a consistent policy for software citation across disciplines and venues. Our work is presented here as a set of software citation principles, a discussion of the motivations for developing the principles, reviews of existing community practice, and a discussion of the requirements these principles would place upon different stakeholders. Working examples and possible technical solutions for how these principles can be implemented will be discussed in a separate paper.

  20. eSoftwareList

    Data.gov (United States)

    US Agency for International Development — USAID Software Database reporting tool created in Oracle Application Express (APEX). This version provides read only access to a database view of the JIRA SAR...

  1. Astronomical Software Directory Service

    Science.gov (United States)

    Hanisch, Robert J.; Payne, Harry; Hayes, Jeffrey

    1997-01-01

    With the support of NASA's Astrophysics Data Program (NRA 92-OSSA-15), we have developed the Astronomical Software Directory Service (ASDS): a distributed, searchable, WWW-based database of software packages and their related documentation. ASDS provides integrated access to 56 astronomical software packages, with more than 16,000 URLs indexed for full-text searching. Users are performing about 400 searches per month. A new aspect of our service is the inclusion of telescope and instrumentation manuals, which prompted us to change the name to the Astronomical Software and Documentation Service. ASDS was originally conceived to serve two purposes: to provide a useful Internet service in an area of expertise of the investigators (astronomical software), and as a research project to investigate various architectures for searching through a set of documents distributed across the Internet. Two of the co-investigators were then installing and maintaining astronomical software as their primary job responsibility. We felt that a service which incorporated our experience in this area would be more useful than a straightforward listing of software packages. The original concept was for a service based on the client/server model, which would function as a directory/referral service rather than as an archive. For performing the searches, we began our investigation with a decision to evaluate the Isite software from the Center for Networked Information Discovery and Retrieval (CNIDR). This software was intended as a replacement for Wide-Area Information Service (WAIS), a client/server technology for performing full-text searches through a set of documents. Isite had some additional features that we considered attractive, and we enjoyed the cooperation of the Isite developers, who were happy to have ASDS as a demonstration project. We ended up staying with the software throughout the project, making modifications to take advantage of new features as they came along, as well as

  2. Global software development

    DEFF Research Database (Denmark)

    Matthiesen, Stina

    2016-01-01

    This overview presents the mid stages of my doctoral research-based on ethnographic work conducted in IT companies in India and in Denmark-on collaborative work within global software development (GSD). In the following I briefly introduce how this research seeks to spark a debate in CSCW...... by challenging contemporary ideals about software development outsourcing through the exploration of the multiplicities and asymmetric dynamics inherent in the collaborative work of GSD....

  3. Biological Imaging Software Tools

    Science.gov (United States)

    Eliceiri, Kevin W.; Berthold, Michael R.; Goldberg, Ilya G.; Ibáñez, Luis; Manjunath, B.S.; Martone, Maryann E.; Murphy, Robert F.; Peng, Hanchuan; Plant, Anne L.; Roysam, Badrinath; Stuurman, Nico; Swedlow, Jason R.; Tomancak, Pavel; Carpenter, Anne E.

    2013-01-01

    Few technologies are more widespread in modern biological laboratories than imaging. Recent advances in optical technologies and instrumentation are providing hitherto unimagined capabilities. Almost all these advances have required the development of software to enable the acquisition, management, analysis, and visualization of the imaging data. We review each computational step that biologists encounter when dealing with digital images, the challenges in that domain, and the overall status of available software for bioimage informatics, focusing on open source options. PMID:22743775

  4. Engineering and Software Engineering

    Science.gov (United States)

    Jackson, Michael

    The phrase ‘software engineering' has many meanings. One central meaning is the reliable development of dependable computer-based systems, especially those for critical applications. This is not a solved problem. Failures in software development have played a large part in many fatalities and in huge economic losses. While some of these failures may be attributable to programming errors in the narrowest sense—a program's failure to satisfy a given formal specification—there is good reason to think that most of them have other roots. These roots are located in the problem of software engineering rather than in the problem of program correctness. The famous 1968 conference was motivated by the belief that software development should be based on “the types of theoretical foundations and practical disciplines that are traditional in the established branches of engineering.” Yet after forty years of currency the phrase ‘software engineering' still denotes no more than a vague and largely unfulfilled aspiration. Two major causes of this disappointment are immediately clear. First, too many areas of software development are inadequately specialised, and consequently have not developed the repertoires of normal designs that are the indispensable basis of reliable engineering success. Second, the relationship between structural design and formal analytical techniques for software has rarely been one of fruitful synergy: too often it has defined a boundary between competing dogmas, at which mutual distrust and incomprehension deprive both sides of advantages that should be within their grasp. This paper discusses these causes and their effects. Whether the common practice of software development will eventually satisfy the broad aspiration of 1968 is hard to predict; but an understanding of past failure is surely a prerequisite of future success.

  5. Towards research on software cybernetics

    OpenAIRE

    2002-01-01

    Software cybernetics is a newly proposed area in software engineering. It makes better use of the interplay between control theory/engineering and software engineering. In this paper, we look into the research potentials of this emerging area.

  6. Operational river discharge forecasting in poorly gauged basins: the Kavango River basin case study

    DEFF Research Database (Denmark)

    Bauer-Gottwein, Peter; Jensen, Iris Hedegaard; Guzinski, R.;

    2015-01-01

    Operational probabilistic forecasts of river discharge are essential for effective water resources management. Many studies have addressed this topic using different approaches ranging from purely statistical black-box approaches to physically based and distributed modeling schemes employing data...... assimilation techniques. However, few studies have attempted to develop operational probabilistic forecasting approaches for large and poorly gauged river basins. The objective of this study is to develop open-source software tools to support hydrologic forecasting and integrated water resources management...

  7. Software Engineering Reviews and Audits

    CERN Document Server

    Summers, Boyd L

    2011-01-01

    Accurate software engineering reviews and audits have become essential to the success of software companies and military and aerospace programs. These reviews and audits define the framework and specific requirements for verifying software development efforts. Authored by an industry professional with three decades of experience, Software Engineering Reviews and Audits offers authoritative guidance for conducting and performing software first article inspections, and functional and physical configuration software audits. It prepares readers to answer common questions for conducting and perform

  8. Computing and software

    Directory of Open Access Journals (Sweden)

    White, G. C.

    2004-06-01

    Full Text Available The reality is that the statistical methods used for analysis of data depend upon the availability of software. Analysis of marked animal data is no different than the rest of the statistical field. The methods used for analysis are those that are available in reliable software packages. Thus, the critical importance of having reliable, up–to–date software available to biologists is obvious. Statisticians have continued to develop more robust models, ever expanding the suite of potential analysis methods available. But without software to implement these newer methods, they will languish in the abstract, and not be applied to the problems deserving them. In the Computers and Software Session, two new software packages are described, a comparison of implementation of methods for the estimation of nest survival is provided, and a more speculative paper about how the next generation of software might be structured is presented. Rotella et al. (2004 compare nest survival estimation with different software packages: SAS logistic regression, SAS non–linear mixed models, and Program MARK. Nests are assumed to be visited at various, possibly infrequent, intervals. All of the approaches described compute nest survival with the same likelihood, and require that the age of the nest is known to account for nests that eventually hatch. However, each approach offers advantages and disadvantages, explored by Rotella et al. (2004. Efford et al. (2004 present a new software package called DENSITY. The package computes population abundance and density from trapping arrays and other detection methods with a new and unique approach. DENSITY represents the first major addition to the analysis of trapping arrays in 20 years. Barker & White (2004 discuss how existing software such as Program MARK require that each new model’s likelihood must be programmed specifically for that model. They wishfully think that future software might allow the user to combine

  9. Managing Distributed Software Projects

    DEFF Research Database (Denmark)

    Persson, John Stouby

    Increasingly, software projects are becoming geographically distributed, with limited face-toface interaction between participants. These projects face particular challenges that need careful managerial attention. This PhD study reports on how we can understand and support the management of distr......Increasingly, software projects are becoming geographically distributed, with limited face-toface interaction between participants. These projects face particular challenges that need careful managerial attention. This PhD study reports on how we can understand and support the management...... of distributed software projects, based on a literature study and a case study. The main emphasis of the literature study was on how to support the management of distributed software projects, but also contributed to an understanding of these projects. The main emphasis of the case study was on how to understand...... the management of distributed software projects, but also contributed to supporting the management of these projects. The literature study integrates what we know about risks and risk-resolution techniques, into a framework for managing risks in distributed contexts. This framework was developed iteratively...

  10. The Ettention software package

    Energy Technology Data Exchange (ETDEWEB)

    Dahmen, Tim, E-mail: Tim.Dahmen@dfki.de [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Saarland University, 66123 Saarbrücken (Germany); Marsalek, Lukas [Eyen SE, Na Nivách 1043/16, 141 00 Praha 4 (Czech Republic); Saarland University, 66123 Saarbrücken (Germany); Marniok, Nico [Saarland University, 66123 Saarbrücken (Germany); Turoňová, Beata [Saarland University, 66123 Saarbrücken (Germany); IMPRS-CS, Max-Planck Institute for Informatics, Campus E 1.4, 66123 Saarbrücken (Germany); Bogachev, Sviatoslav [Saarland University, 66123 Saarbrücken (Germany); Trampert, Patrick; Nickels, Stefan [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Slusallek, Philipp [German Research Center for Artificial Intelligence GmbH (DFKI), 66123 Saarbrücken (Germany); Saarland University, 66123 Saarbrücken (Germany)

    2016-02-15

    We present a novel software package for the problem “reconstruction from projections” in electron microscopy. The Ettention framework consists of a set of modular building-blocks for tomographic reconstruction algorithms. The well-known block iterative reconstruction method based on Kaczmarz algorithm is implemented using these building-blocks, including adaptations specific to electron tomography. Ettention simultaneously features (1) a modular, object-oriented software design, (2) optimized access to high-performance computing (HPC) platforms such as graphic processing units (GPU) or many-core architectures like Xeon Phi, and (3) accessibility to microscopy end-users via integration in the IMOD package and eTomo user interface. We also provide developers with a clean and well-structured application programming interface (API) that allows for extending the software easily and thus makes it an ideal platform for algorithmic research while hiding most of the technical details of high-performance computing. - Highlights: • Novel software package for “reconstruction from projections” in electron microscopy. • Support for high-resolution reconstructions on iterative reconstruction algorithms. • Support for CPU, GPU and Xeon Phi. • Integration in the IMOD software. • Platform for algorithm researchers: object oriented, modular design.

  11. Software Activation Using Multithreading

    Directory of Open Access Journals (Sweden)

    Jianrui Zhang

    2012-11-01

    Full Text Available Software activation is an anti-piracy technology designed to verify that software products have been legitimately licensed. Activation should be quick and simple while simultaneously being secure and protecting customer privacy. The most common form of software activation is for the user to enter a legitimate product serial number. However, software activation based on serial numbers appears to be weak, since cracks for many programs are readily available on the Internet. Users can employ such cracks to bypass software activation.Serial number verification logic usually executes sequentially in a single thread. Such an approach is relatively easy to break since attackers can trace the code to understand how the logic works. In this paper, we develop a practical multi-threaded verification design. Our results show that by proper use of multi-threading, the amount of traceable code in a debugger can be reduced to a low percentage of the total and the traceable code in each run can differ as well. This makes it significantly more difficult for an attacker to reverse engineer the code as a means of bypassing a security check. Finally, we attempt to quantify the increased effort needed to break our verification logic.

  12. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

    Science.gov (United States)

    1997-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  13. Impact of Agile Software Development Model on Software Maintainability

    Science.gov (United States)

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  14. Software cost/resource modeling: Software quality tradeoff measurement

    Science.gov (United States)

    Lawler, R. W.

    1980-01-01

    A conceptual framework for treating software quality from a total system perspective is developed. Examples are given to show how system quality objectives may be allocated to hardware and software; to illustrate trades among quality factors, both hardware and software, to achieve system performance objectives; and to illustrate the impact of certain design choices on software functionality.

  15. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

    Science.gov (United States)

    1995-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  16. Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

    Science.gov (United States)

    1996-01-01

    The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

  17. Impact of Agile Software Development Model on Software Maintainability

    Science.gov (United States)

    Gawali, Ajay R.

    2012-01-01

    Software maintenance and support costs account for up to 60% of the overall software life cycle cost and often burdens tightly budgeted information technology (IT) organizations. Agile software development approach delivers business value early, but implications on software maintainability are still unknown. The purpose of this quantitative study…

  18. libdrdc: software standards library

    Science.gov (United States)

    Erickson, David; Peng, Tie

    2008-04-01

    This paper presents the libdrdc software standards library including internal nomenclature, definitions, units of measure, coordinate reference frames, and representations for use in autonomous systems research. This library is a configurable, portable C-function wrapped C++ / Object Oriented C library developed to be independent of software middleware, system architecture, processor, or operating system. It is designed to use the automatically-tuned linear algebra suite (ATLAS) and Basic Linear Algebra Suite (BLAS) and port to firmware and software. The library goal is to unify data collection and representation for various microcontrollers and Central Processing Unit (CPU) cores and to provide a common Application Binary Interface (ABI) for research projects at all scales. The library supports multi-platform development and currently works on Windows, Unix, GNU/Linux, and Real-Time Executive for Multiprocessor Systems (RTEMS). This library is made available under LGPL version 2.1 license.

  19. Lecture 2: Software Security

    CERN Document Server

    CERN. Geneva

    2013-01-01

    Computer security has been an increasing concern for IT professionals for a number of years, yet despite all the efforts, computer systems and networks remain highly vulnerable to attacks of different kinds. Design flaws and security bugs in the underlying software are among the main reasons for this. This lecture addresses the following question: how to create secure software? The lecture starts with a definition of computer security and an explanation of why it is so difficult to achieve. It then introduces the main security principles (like least-privilege, or defense-in-depth) and discusses security in different phases of the software development cycle. The emphasis is put on the implementation part: most common pitfalls and security bugs are listed, followed by advice on best practice for security development, testing and deployment. Sebastian Lopienski is CERN’s deputy Computer Security Officer. He works on security strategy and policies; offers internal consultancy and audit services; develops and ...

  20. Astronomers as Software Developers

    Science.gov (United States)

    Pildis, Rachel A.

    2016-01-01

    Astronomers know that their research requires writing, adapting, and documenting computer software. Furthermore, they often have to learn new computer languages and figure out how existing programs work without much documentation or guidance and with extreme time pressure. These are all skills that can lead to a software development job, but recruiters and employers probably won't know that. I will discuss all the highly useful experience that astronomers may not know that they already have, and how to explain that knowledge to others when looking for non-academic software positions. I will also talk about some of the pitfalls I have run into while interviewing for jobs and working as a developer, and encourage you to embrace the curiosity employers might have about your non-standard background.

  1. Secure software practices among Malaysian software practitioners: An exploratory study

    Science.gov (United States)

    Mohamed, Shafinah Farvin Packeer; Baharom, Fauziah; Deraman, Aziz; Yahya, Jamaiah; Mohd, Haslina

    2016-08-01

    Secure software practices is increasingly gaining much importance among software practitioners and researchers due to the rise of computer crimes in the software industry. It has become as one of the determinant factors for producing high quality software. Even though its importance has been revealed, its current practice in the software industry is still scarce, particularly in Malaysia. Thus, an exploratory study is conducted among software practitioners in Malaysia to study their experiences and practices in the real-world projects. This paper discusses the findings from the study, which involved 93 software practitioners. Structured questionnaire is utilized for data collection purpose whilst statistical methods such as frequency, mean, and cross tabulation are used for data analysis. Outcomes from this study reveal that software practitioners are becoming increasingly aware on the importance of secure software practices, however, they lack of appropriate implementation, which could affect the quality of produced software.

  2. Methods of Software Verification

    Directory of Open Access Journals (Sweden)

    R. E. Gurin

    2015-01-01

    Full Text Available This article is devoted to the problem of software verification (SW. Methods of software verification designed to check the software for compliance with the stated requirements such as correctness, system security and system adaptability to small changes in the environment, portability and compatibility, etc. These are various methods both by the operation process and by the way of achieving result. The article describes the static and dynamic methods of software verification and paid attention to the method of symbolic execution. In its review of static analysis are discussed and described the deductive method, and methods for testing the model. A relevant issue of the pros and cons of a particular method is emphasized. The article considers classification of test techniques for each method. In this paper we present and analyze the characteristics and mechanisms of the static analysis of dependencies, as well as their views, which can reduce the number of false positives in situations where the current state of the program combines two or more states obtained both in different paths of execution and in working with multiple object values. Dependences connect various types of software objects: single variables, the elements of composite variables (structure fields, array elements, the size of the heap areas, the length of lines, the number of initialized array elements in the verification code using static methods. The article pays attention to the identification of dependencies within the framework of the abstract interpretation, as well as gives an overview and analysis of the inference tools.Methods of dynamic analysis such as testing, monitoring and profiling are presented and analyzed. Also some kinds of tools are considered which can be applied to the software when using the methods of dynamic analysis. Based on the work a conclusion is drawn, which describes the most relevant problems of analysis techniques, methods of their solutions and

  3. Processeringsoptimering med Canons software

    DEFF Research Database (Denmark)

    Precht, Helle

    2009-01-01

    . Muligheder i software optimering blev studeret i relation til optimal billedkvalitet og kontrol optagelser, for at undersøge om det var muligt at acceptere diagnostisk billedkvalitet og derved tage afsæt i ALARA. Metode og materialer Et kvantitativt eksperimentelt studie baseret på forsøg med teknisk og...... humant fantom. CD Rad fantom anvendes som teknisk fantom, hvor billederne blev analyseret med CD Rad software, og resultatet var en objektiv IQF værdi. Det humane fantom var et lamme pelvis med femur, der via NRPB’ er sammenlignelig med absorptionen ved et femårigt barn. De humane forsøgsbilleder blev...

  4. Agile distributed software development

    DEFF Research Database (Denmark)

    Persson, John Stouby; Mathiassen, Lars; Aaen, Ivan

    2012-01-01

    While face-to-face interaction is fundamental in agile software development, distributed environments must rely extensively on mediated interactions. Practicing agile principles in distributed environments therefore poses particular control challenges related to balancing fixed vs. evolving quality...... requirements and people vs. process-based collaboration. To investigate these challenges, we conducted an in-depth case study of a successful agile distributed software project with participants from a Russian firm and a Danish firm. Applying Kirsch’s elements of control framework, we offer an analysis of how...

  5. Software Testing as Science

    Directory of Open Access Journals (Sweden)

    Ingrid Gallesdic

    2013-06-01

    Full Text Available The most widespread opinion among people who have some connection with software testing is that this activity is an art. In fact, books have been published widely whose titles refer to it as art, role or process. But because software complexity is increasing every year, this paper proposes a new approach, conceiving the test as a science. This is because the processes by which they are applied are the steps of the scientific method: inputs, processes, outputs. The contents of this paper examines the similarities and test characteristics as science.

  6. Agile software development

    CERN Document Server

    Stober, Thomas

    2009-01-01

    Software Development is moving towards a more agile and more flexible approach. It turns out that the traditional 'waterfall' model is not supportive in an environment where technical, financial and strategic constraints are changing almost every day. But what is agility? What are today's major approaches? And especially: What is the impact of agile development principles on the development teams, on project management and on software architects? How can large enterprises become more agile and improve their business processes, which have been existing since many, many years? What are the limit

  7. Software Safety and Security

    CERN Document Server

    Nipkow, T; Hauptmann, B

    2012-01-01

    Recent decades have seen major advances in methods and tools for checking the safety and security of software systems. Automatic tools can now detect security flaws not only in programs of the order of a million lines of code, but also in high-level protocol descriptions. There has also been something of a breakthrough in the area of operating system verification. This book presents the lectures from the NATO Advanced Study Institute on Tools for Analysis and Verification of Software Safety and Security; a summer school held at Bayrischzell, Germany, in 2011. This Advanced Study Institute was

  8. Machine Tool Software

    Science.gov (United States)

    1988-01-01

    A NASA-developed software package has played a part in technical education of students who major in Mechanical Engineering Technology at William Rainey Harper College. Professor Hack has been using (APT) Automatically Programmed Tool Software since 1969 in his CAD/CAM Computer Aided Design and Manufacturing curriculum. Professor Hack teaches the use of APT programming languages for control of metal cutting machines. Machine tool instructions are geometry definitions written in APT Language to constitute a "part program." The part program is processed by the machine tool. CAD/CAM students go from writing a program to cutting steel in the course of a semester.

  9. Software product quality control

    CERN Document Server

    Wagner, Stefan

    2013-01-01

    Quality is not a fixed or universal property of software; it depends on the context and goals of its stakeholders. Hence, when you want to develop a high-quality software system, the first step must be a clear and precise specification of quality. Yet even if you get it right and complete, you can be sure that it will become invalid over time. So the only solution is continuous quality control: the steady and explicit evaluation of a product's properties with respect to its updated quality goals.This book guides you in setting up and running continuous quality control in your environment. Star

  10. TIA Software User's Manual

    Science.gov (United States)

    Cramer, K. Elliott; Syed, Hazari I.

    1995-01-01

    This user's manual describes the installation and operation of TIA, the Thermal-Imaging acquisition and processing Application, developed by the Nondestructive Evaluation Sciences Branch at NASA Langley Research Center, Hampton, Virginia. TIA is a user friendly graphical interface application for the Macintosh 2 and higher series computers. The software has been developed to interface with the Perceptics/Westinghouse Pixelpipe(TM) and PixelStore(TM) NuBus cards and the GW Instruments MacADIOS(TM) input-output (I/O) card for the Macintosh for imaging thermal data. The software is also capable of performing generic image-processing functions.

  11. Workstation software framework

    Science.gov (United States)

    Andolfato, L.; Karban, R.

    2008-08-01

    The Workstation Software Framework (WSF) is a state machine model driven development toolkit designed to generate event driven applications based on ESO VLT software. State machine models are used to generate executables. The toolkit provides versatile code generation options and it supports Mealy, Moore and hierarchical state machines. Generated code is readable and maintainable since it combines well known design patterns such as the State and the Template patterns. WSF promotes a development process that is based on model reusability through the creation of a catalog of state machine patterns.

  12. Green in software engineering

    CERN Document Server

    Calero Munoz, Coral

    2015-01-01

    This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

  13. Six Sigma software development

    CERN Document Server

    Tayntor, Christine B

    2002-01-01

    Since Six Sigma has had marked success in improving quality in other settings, and since the quality of software remains poor, it seems a natural evolution to apply the concepts and tools of Six Sigma to system development and the IT department. Until now however, there were no books available that applied these concepts to the system development process. Six Sigma Software Development fills this void and illustrates how Six Sigma concepts can be applied to all aspects of the evolving system development process. It includes the traditional waterfall model and in the support of legacy systems,

  14. INTEGRATING CRM SOFTWARE APPLICATIONS

    OpenAIRE

    2008-01-01

    Scientists, end users of CRM applications and producers of CRM software, all come to an agreement when talking about the idea of CRM, the CRM strategy or the term CRM. The main aspect is that CRM can be analyzed from two different points of view: CRM – the marketing strategy and CRM – the software. The first term refers to establishing some personalized relationships with the customers that can be afterwards easily managed. This way, it can determine at any time the past client relations, the...

  15. Future Trends of Software Technology and Applications: Software Architecture

    Science.gov (United States)

    2006-01-01

    Sponsored by the U.S. Department of Defense © 2006 by Carnegie Mellon University 1 Pittsburgh, PA 15213-3890 Future Trends of Software Technology ...COVERED 00-00-2006 to 00-00-2006 4. TITLE AND SUBTITLE Future Trends of Software Technology and Applications: Software Architecture 5a. CONTRACT...and Applications: Software Architecture Paul Clements Software Engineering Institute Carnegie Mellon University Report Documentation Page Form

  16. Software testing concepts and operations

    CERN Document Server

    Mili, Ali

    2015-01-01

    Explores and identifies the main issues, concepts, principles and evolution of software testing, including software quality engineering and testing concepts, test data generation, test deployment analysis, and software test managementThis book examines the principles, concepts, and processes that are fundamental to the software testing function. This book is divided into five broad parts. Part I introduces software testing in the broader context of software engineering and explores the qualities that testing aims to achieve or ascertain, as well as the lifecycle of software testing. Part II c

  17. The Art of Software Testing

    CERN Document Server

    Myers, Glenford J; Badgett, Tom

    2011-01-01

    The classic, landmark work on software testing The hardware and software of computing have changed markedly in the three decades since the first edition of The Art of Software Testing, but this book's powerful underlying analysis has stood the test of time. Whereas most books on software testing target particular development techniques, languages, or testing methods, The Art of Software Testing, Third Edition provides a brief but powerful and comprehensive presentation of time-proven software testing approaches. If your software development project is mission critical, this book is an investme

  18. Evaluation & Optimization of Software Engineering

    Directory of Open Access Journals (Sweden)

    Asaduzzaman Noman

    2016-06-01

    Full Text Available The term is made of two words, software and engineering. Software is more than just a program code. A program is an executable code, which serves some computational purpose. Software is considered to be collection of executable programming code, associated libraries and documentations. Software, when made for a specific requirement is called software product. Engineering on the other hand, is all about developing products, using well-defined, scientific principles and methods. The outcome of software engineering is an efficient and reliable software product. IEEE defines software engineering as: The application of a systematic, disciplined, quantifiable approach to the development, operation and maintenance of software; that is, the application of engineering to software.

  19. Software for multistate analysis

    Directory of Open Access Journals (Sweden)

    Frans J. Willekens

    2014-08-01

    Full Text Available Background: The growing interest in pathways, the increased availability of life-history data,innovations in statistical and demographic techniques, and advances in softwaretechnology have stimulated the development of software packages for multistatemodeling of life histories. Objective: In the paper we list and briefly discuss several software packages for multistate analysisof life-history data. The packages cover the estimation of multistate models (transitionrates and transition probabilities, multistate life tables, multistate populationprojections, and microsimulation. Methods: Brief description of software packages in a historical and comparative perspective. Results: During the past 10 years the advances in multistate modeling software have beenimpressive. New computational tools accompany the development of new methods instatistics and demography. The statistical theory of counting processes is the preferredmethod for the estimation of multistate models and R is the preferred programmingplatform. Conclusions: Innovations in method, data, and computer technology have removed the traditionalbarriers to multistate modeling of life histories and the computation of informative lifecourseindicators. The challenge ahead of us is to model and predict individual lifehistories.

  20. Open Source Software Acquisition

    DEFF Research Database (Denmark)

    Holck, Jesper; Kühn Pedersen, Mogens; Holm Larsen, Michael

    2005-01-01

    Lately we have seen a growing interest from both public and private organisations to adopt OpenSource Software (OSS), not only for a few, specific applications but also on a more general levelthroughout the organisation. As a consequence, the organisations' decisions on adoption of OSS arebecoming...

  1. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Diebold, Philipp; Münch, Jürgen

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...

  2. Global Software Development

    DEFF Research Database (Denmark)

    Søderberg, Anne-Marie; Krishna, S.; Bjørn, Pernille

    2013-01-01

    accounts of close collaboration processes in two large and complex projects, where off-shoring of software development is moved to a strategic level, we found that the vendor was able to establish a strategic partnership through long-term engagement with the field of banking and insurance as well...

  3. Improving Agile Software Practice

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte

    2006-01-01

    Software process improvement in small and agile organizations is often problematic, but achieving good SPI-assessments can still be necessary to stay in the marked or to meet demands of multinational owners. The traditional norm driven, centralized and control centered improvement approaches has...

  4. AOFlagger: RFI Software

    Science.gov (United States)

    Offringa, A. R.

    2010-10-01

    The RFI software presented here can automatically flag data and can be used to analyze the data in a measurement. The purpose of flagging is to mark samples that are affected by interfering sources such as radio stations, airplanes, electrical fences or other transmitting interferers. The tools in the package are meant for offline use. The software package contains a graphical interface ("rfigui") that can be used to visualize a measurement set and analyze mitigation techniques. It also contains a console flagger ("rficonsole") that can execute a script of mitigation functions without the overhead of a graphical environment. All tools were written in C++. The software has been tested extensively on low radio frequencies (150 MHz or lower) produced by the WSRT and LOFAR telescopes. LOFAR is the Low Frequency Array that is built in and around the Netherlands. Higher frequencies should work as well. Some of the methods implemented are the SumThreshold, the VarThreshold and the singular value decomposition (SVD) method. Included also are several surface fitting algorithms. The software is published under the GNU General Public License version 3.

  5. Writing testable software requirements

    Energy Technology Data Exchange (ETDEWEB)

    Knirk, D. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial identifies common problems in analyzing requirements in the problem and constructing a written specification of what the software is to do. It deals with two main problem areas: identifying and describing problem requirements, and analyzing and describing behavior specifications.

  6. Improving Agile Software Practice

    DEFF Research Database (Denmark)

    Tjørnehøj, Gitte

    2006-01-01

    Software process improvement in small and agile organizations is often problematic, but achieving good SPI-assessments can still be necessary to stay in the marked or to meet demands of multinational owners. The traditional norm driven, centralized and control centered improvement approaches has...

  7. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Konopka, Claudia; Nellemann, Peter

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...

  8. Software Defined Networking

    DEFF Research Database (Denmark)

    Caba, Cosmin Marius

    resources are limited. Hence, to counteract this trend, current QoS mechanisms must become simpler to deploy and operate, in order to motivate NSPs to employ QoS techniques instead of overprovisioning. Software Defined Networking (SDN) represents a paradigm shift in the way telecommunication and data...

  9. Complexity, Systems, and Software

    Science.gov (United States)

    2014-08-14

    complex ( Hidden issues; dumbs down operator) 11 Complexity, Systems, and Software Sarah Sheard August 14, 2014 © 2014 Carnegie...August 14, 2014 © 2014 Carnegie Mellon University Addressing Complexity in SoSs Source: SEBOK Wiki System Con truer Strateglc Context

  10. Green Software Products

    NARCIS (Netherlands)

    Jagroep, Erik Arijender

    2017-01-01

    The rising energy consumption of the ICT industry has triggered a quest for more green, energy efficient ICT solutions. The role of software as the true consumer of power and its potential contribution to reach sustainability goals has increasingly been acknowledged. At the same time, it is shown to

  11. The FARE Software

    Science.gov (United States)

    Pitarello, Adriana

    2015-01-01

    This article highlights the importance of immediate corrective feedback in tutorial software for language teaching in an academic learning environment. We aim to demonstrate that, rather than simply reporting on the performance of the foreign language learner, this feedback can act as a mediator of students' cognitive and metacognitive activity.…

  12. JSATS Decoder Software Manual

    Energy Technology Data Exchange (ETDEWEB)

    Flory, Adam E.; Lamarche, Brian L.; Weiland, Mark A.

    2013-05-01

    The Juvenile Salmon Acoustic Telemetry System (JSATS) Decoder is a software application that converts a digitized acoustic signal (a waveform stored in the .bwm file format) into a list of potential JSATS Acoustic MicroTransmitter (AMT) tagcodes along with other data about the signal including time of arrival and signal to noise ratios (SNR). This software is capable of decoding single files, directories, and viewing raw acoustic waveforms. When coupled with the JSATS Detector, the Decoder is capable of decoding in ‘real-time’ and can also provide statistical information about acoustic beacons placed within receive range of hydrophones within a JSATS array. This document details the features and functionality of the software. The document begins with software installation instructions (section 2), followed in order by instructions for decoder setup (section 3), decoding process initiation (section 4), then monitoring of beacons (section 5) using real-time decoding features. The last section in the manual describes the beacon, beacon statistics, and the results file formats. This document does not consider the raw binary waveform file format.

  13. Software Architecture Evolution

    Science.gov (United States)

    2013-12-01

    Clinical Linguistics & Phonetics 16(5): 299–316. doi:10.1080/ 02699200210135901 [162] G. C. Murphy, D. Notkin, K. J. Sullivan (2001). “Software...same connector in the model. One way of understanding such examples is as instances of a very common linguistic phenomenon called synecdoche, in which a

  14. High Assurance Software

    Science.gov (United States)

    2013-10-22

    Conference on Software Engineering. 2013. Fingerprinting Malware Using Bioinformatics Tools Building a Classifier for the Zeus Virus, Pedersen, J...file is a nucleotide representation of the original artifact file. This process can be reversed to obtain the original file from the FASTA file

  15. Limits of Software Reuse

    NARCIS (Netherlands)

    Holenderski, L.

    2006-01-01

    Software reuse is considered one of the main techniques to increasesoftware productivity. We present two simple mathematical argumentsthat show some theoretical limits of reuse. It turns out that the increase of productivity due to internal reuse is at most linear, farfrom the needed exponential gr

  16. Software engineering tools.

    Science.gov (United States)

    Wear, L L; Pinkert, J R

    1994-01-01

    We have looked at general descriptions and illustrations of several software development tools, such as tools for prototyping, developing DFDs, testing, and maintenance. Many others are available, and new ones are being developed. However, you have at least seen some examples of powerful CASE tools for systems development.

  17. Generalized Software Security Framework

    Directory of Open Access Journals (Sweden)

    Smriti Jain

    2011-01-01

    Full Text Available Security of information has become a major concern in today's digitized world. As a result, effective techniques to secure information are required. The most effective way is to incorporate security in the development process itself thereby resulting into secured product. In this paper, we propose a framework that enables security to be included in the software development process. The framework consists of three layers namely; control layer, aspect layer and development layer. The control layer illustrates the managerial control of the entire software development process with the help of governance whereas aspect layer recognizes the security mechanisms that can be incorporated during the software development to identify the various security features. The development layer helps to integrate the various security aspects as well as the controls identified in the above layers during the development process. The layers are further verified by a survey amongst the IT professionals. The professionals concluded that the developed framework is easy to use due to its layered architecture and, can be customized for various types of softwares.

  18. Iterative software kernels

    Energy Technology Data Exchange (ETDEWEB)

    Duff, I.

    1994-12-31

    This workshop focuses on kernels for iterative software packages. Specifically, the three speakers discuss various aspects of sparse BLAS kernels. Their topics are: `Current status of user lever sparse BLAS`; Current status of the sparse BLAS toolkit`; and `Adding matrix-matrix and matrix-matrix-matrix multiply to the sparse BLAS toolkit`.

  19. FLOODPLAIN, PLATTE COUNTY, MISSOURI USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The Floodplain Mapping/Redelineation study deliverables depict and quantify the flood risks for the study area. The primary risk classifications used are the...

  20. Generic Kalman Filter Software

    Science.gov (United States)

    Lisano, Michael E., II; Crues, Edwin Z.

    2005-01-01

    The Generic Kalman Filter (GKF) software provides a standard basis for the development of application-specific Kalman-filter programs. Historically, Kalman filters have been implemented by customized programs that must be written, coded, and debugged anew for each unique application, then tested and tuned with simulated or actual measurement data. Total development times for typical Kalman-filter application programs have ranged from months to weeks. The GKF software can simplify the development process and reduce the development time by eliminating the need to re-create the fundamental implementation of the Kalman filter for each new application. The GKF software is written in the ANSI C programming language. It contains a generic Kalman-filter-development directory that, in turn, contains a code for a generic Kalman filter function; more specifically, it contains a generically designed and generically coded implementation of linear, linearized, and extended Kalman filtering algorithms, including algorithms for state- and covariance-update and -propagation functions. The mathematical theory that underlies the algorithms is well known and has been reported extensively in the open technical literature. Also contained in the directory are a header file that defines generic Kalman-filter data structures and prototype functions and template versions of application-specific subfunction and calling navigation/estimation routine code and headers. Once the user has provided a calling routine and the required application-specific subfunctions, the application-specific Kalman-filter software can be compiled and executed immediately. During execution, the generic Kalman-filter function is called from a higher-level navigation or estimation routine that preprocesses measurement data and post-processes output data. The generic Kalman-filter function uses the aforementioned data structures and five implementation- specific subfunctions, which have been developed by the user on

  1. Software redundancy: what, where, how

    OpenAIRE

    Mattavelli, Andrea; Pezzè, Mauro; Carzaniga, Antonio

    2017-01-01

    Software systems have become pervasive in everyday life and are the core component of many crucial activities. An inadequate level of reliability may determine the commercial failure of a software product. Still, despite the commitment and the rigorous verification processes employed by developers, software is deployed with faults. To increase the reliability of software systems, researchers have investigated the use of various form of redundancy. Informally, a software system is redunda...

  2. Numerical software: science or alchemy

    Energy Technology Data Exchange (ETDEWEB)

    Gear, C.W.

    1979-06-01

    This is a summary of the Forsythe lecture presented at the Computer Science Conference, Dayton, Ohio, in February 1979. It examines the activity called Numerical Software, first to see what distinguishes numerical software from any other form of software and why numerical software is so much more difficult. Then it examines the scientific basis of such software and discusses that is lacking in that basis.

  3. Flight Software Math Library

    Science.gov (United States)

    McComas, David

    2013-01-01

    The flight software (FSW) math library is a collection of reusable math components that provides typical math utilities required by spacecraft flight software. These utilities are intended to increase flight software quality reusability and maintainability by providing a set of consistent, well-documented, and tested math utilities. This library only has dependencies on ANSI C, so it is easily ported. Prior to this library, each mission typically created its own math utilities using ideas/code from previous missions. Part of the reason for this is that math libraries can be written with different strategies in areas like error handling, parameters orders, naming conventions, etc. Changing the utilities for each mission introduces risks and costs. The obvious risks and costs are that the utilities must be coded and revalidated. The hidden risks and costs arise in miscommunication between engineers. These utilities must be understood by both the flight software engineers and other subsystem engineers (primarily guidance navigation and control). The FSW math library is part of a larger goal to produce a library of reusable Guidance Navigation and Control (GN&C) FSW components. A GN&C FSW library cannot be created unless a standardized math basis is created. This library solves the standardization problem by defining a common feature set and establishing policies for the library s design. This allows the libraries to be maintained with the same strategy used in its initial development, which supports a library of reusable GN&C FSW components. The FSW math library is written for an embedded software environment in C. This places restrictions on the language features that can be used by the library. Another advantage of the FSW math library is that it can be used in the FSW as well as other environments like the GN&C analyst s simulators. This helps communication between the teams because they can use the same utilities with the same feature set and syntax.

  4. SimRiver: Environmental Modeling Software for the Science Classroom

    Science.gov (United States)

    Hoffer, Jeannette; Mayama, Shigeki; Lingle, Kristin; Conroy, Kathryn; Julius, Matthew

    2011-01-01

    While students may acknowledge the impact that land use and development have on our environment, they do not necessarily understand the relationship between human activities and ecosystem responses. Therefore, the nature of the relationships leaves the science teacher to most often present information in a purely narrative form without any…

  5. Interface-based software testing

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  6. Identifying and Mitigating Potential Nutrient and Sediment Hot Spots under a Future Scenario in the Missouri River Basin

    Energy Technology Data Exchange (ETDEWEB)

    Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Zhang, Zhonglong [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    Using the Soil and Water Assessment Tool (SWAT) for large-scale watershed modeling could be useful for evaluating the quality of the water in regions that are dominated by nonpoint sources in order to identify potential “hot spots” for which mitigating strategies could be further developed. An analysis of water quality under future scenarios in which changes in land use would be made to accommodate increased biofuel production was developed for the Missouri River Basin (MoRB) based on a SWAT model application. The analysis covered major agricultural crops and biofuel feedstock in the MoRB, including pasture land, hay, corn, soybeans, wheat, and switchgrass. The analysis examined, at multiple temporal and spatial scales, how nitrate, organic nitrogen, and total nitrogen; phosphorus, organic phosphorus, inorganic phosphorus, and total phosphorus; suspended sediments; and water flow (water yield) would respond to the shifts in land use that would occur under proposed future scenarios. The analysis was conducted at three geospatial scales: (1) large tributary basin scale (two: Upper MoRB and Lower MoRB); (2) regional watershed scale (seven: Upper Missouri River, Middle Missouri River, Middle Lower Missouri River, Lower Missouri River, Yellowstone River, Platte River, and Kansas River); and (3) eight-digit hydrologic unit (HUC-8) subbasin scale (307 subbasins). Results showed that subbasin-level variations were substantial. Nitrogen loadings decreased across the entire Upper MoRB, and they increased in several subbasins in the Lower MoRB. Most nitrate reductions occurred in lateral flow. Also at the subbasin level, phosphorus in organic, sediment, and soluble forms was reduced by 35%, 45%, and 65%, respectively. Suspended sediments increased in 68% of the subbasins. The water yield decreased in 62% of the subbasins. In the Kansas River watershed, the water quality improved significantly with regard to every nitrogen and phosphorus compound. The improvement was

  7. The Saint Louis River Idea-Slam crowd sourcing good ideas for the Saint Louis River

    Science.gov (United States)

    As part of the 2017 Saint Louis River Summit, we propose hosting an “Idea-Slam” using software originally developed by the U.S. Consumer Financial Protection Bureau. Idea-box is an open source online app/website used to collect and surface ideas from members of an or...

  8. Mapping the bathymetry of a turbid, sand-bed river using ground-based reflectance measurements and hyperspectral image data

    Science.gov (United States)

    Legleiter, C. J.; Kinzel, P. J.; Nelson, J. M.

    2010-12-01

    The Platte River in central Nebraska encompasses relatively stable, single-thread to island-braided reaches as well as wider, fully braided segments with highly mobile bar forms. Across this range of morphologies, suspended sediment and organic material contribute to turbid water conditions. In addition, the Platte is the focus of management activities intended to mitigate encroachment of vegetation and improve habitat for various migratory bird species, primarily by increasing the areal extent of shallow to slightly emergent mid-channel sand bars. The diversity of channel types and optical properties make this a challenging environment in which to implement a remote sensing approach, but the Platte also provides an opportunity for these methods to support management objectives. To evaluate the potential utility of remote sensing techniques along the Platte, we acquired hyperspectral image data, collected field spectra, and surveyed bed topography for three reaches. Ground-based measurements of reflectance Rλ were made above the water surface for flow depths d from 5 - 67 cm and a range of substrate types. An optimal band ratio analysis (OBRA) of these data, whereby regressions of log-transformed band ratios against measured depths were performed for all possible band combinations, yielded a strong, linear relationship (R2 = 0.95) between ln ({R593}/{R{647}) and d. Similar band ratio analyses were performed using reflectance spectra extracted from the hyperspectral image data for locations at which bed elevations were surveyed and compared to measured water surface elevations to calculate flow depths. Image-based OBRA produced variable results for the three sites. For a narrower, deeper reach lacking mobile mid-channel bars, a ln ({R490}/{R{638}) vs. d relation had an R2 of 0.83; applying this expression to the image generated a bathymetric map that agreed closely with our survey data. The other two sites featured fully braided morphologies, shallower depths, and

  9. What Counts in Software Process?

    DEFF Research Database (Denmark)

    Cohn, Marisa

    2009-01-01

    In software development, there is an interplay between Software Process models and Software Process enactments. The former tends to be abstract descriptions or plans. The latter tends to be specific instantiations of some ideal procedure. In this paper, we examine the role of work artifacts...... of the relationship between artifacts and Software Process. The paper argues that Software Process is a generative system, which participants called “The Conversation,” that emerges out of the interplay between Software Process models and Software Process enactments....... and conversations in negotiating between prescriptions from a model and the contingencies that arise in an enactment. A qualitative field study at two Agile software development companies was conducted to investigate the role of artifacts in the software development work and the relationship between these artifacts...

  10. A software engineering process for safety-critical software application.

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Byung Heon; Kim, Hang Bae; Chang, Hoon Seon; Jeon, Jong Sun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-02-01

    Application of computer software to safety-critical systems in on the increase. To be successful, the software must be designed and constructed to meet the functional and performance requirements of the system. For safety reason, the software must be demonstrated not only to meet these requirements, but also to operate safely as a component within the system. For longer-term cost consideration, the software must be designed and structured to ease future maintenance and modifications. This paper presents a software engineering process for the production of safety-critical software for a nuclear power plant. The presentation is expository in nature of a viable high quality safety-critical software development. It is based on the ideas of a rational design process and on the experience of the adaptation of such process in the production of the safety-critical software for the shutdown system number two of Wolsung 2, 3 and 4 nuclear power generation plants. This process is significantly different from a conventional process in terms of rigorous software development phases and software design techniques, The process covers documentation, design, verification and testing using mathematically precise notations and highly reviewable tabular format to specify software requirements and software requirements and software requirements and code against software design using static analysis. The software engineering process described in this paper applies the principle of information-hiding decomposition in software design using a modular design technique so that when a change is required or an error is detected, the affected scope can be readily and confidently located. it also facilitates a sense of high degree of confidence in the `correctness` of the software production, and provides a relatively simple and straightforward code implementation effort. 1 figs., 10 refs. (Author).

  11. Implementing Software Defined Radio

    CERN Document Server

    Grayver, Eugene

    2013-01-01

    Software Defined Radio makes wireless communications easier, more efficient, and more reliable. This book bridges the gap between academic research and practical implementation. When beginning a project, practicing engineers, technical managers, and graduate students can save countless hours by considering the concepts presented in these pages. The author covers the myriad options and trade-offs available when selecting an appropriate hardware architecture. As demonstrated here, the choice between hardware- and software-centric architecture can mean the difference between meeting an aggressive schedule and bogging down in endless design iterations. Because of the author’s experience overseeing dozens of failed and successful developments, he is able to present many real-life examples. Some of the key concepts covered are: Choosing the right architecture for the market – laboratory, military, or commercial Hardware platforms – FPGAs, GPPs, specialized and hybrid devices Standardization efforts to ens...

  12. Chemical recognition software

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.S.; Trahan, M.W.; Nelson, W.E.; Hargis, P.H. Jr.; Tisone, G.C.

    1994-06-01

    We have developed a capability to make real time concentration measurements of individual chemicals in a complex mixture using a multispectral laser remote sensing system. Our chemical recognition and analysis software consists of three parts: (1) a rigorous multivariate analysis package for quantitative concentration and uncertainty estimates, (2) a genetic optimizer which customizes and tailors the multivariate algorithm for a particular application, and (3) an intelligent neural net chemical filter which pre-selects from the chemical database to find the appropriate candidate chemicals for quantitative analyses by the multivariate algorithms, as well as providing a quick-look concentration estimate and consistency check. Detailed simulations using both laboratory fluorescence data and computer synthesized spectra indicate that our software can make accurate concentration estimates from complex multicomponent mixtures, even when the mixture is noisy and contaminated with unknowns.

  13. Chemical recognition software

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.S.; Trahan, M.W.; Nelson, W.E.; Hargis, P.J. Jr.; Tisone, G.C.

    1994-12-01

    We have developed a capability to make real time concentration measurements of individual chemicals in a complex mixture using a multispectral laser remote sensing system. Our chemical recognition and analysis software consists of three parts: (1) a rigorous multivariate analysis package for quantitative concentration and uncertainty estimates, (2) a genetic optimizer which customizes and tailors the multivariate algorithm for a particular application, and (3) an intelligent neural net chemical filter which pre-selects from the chemical database to find the appropriate candidate chemicals for quantitative analyses by the multivariate algorithms, as well as providing a quick-look concentration estimate and consistency check. Detailed simulations using both laboratory fluorescence data and computer synthesized spectra indicate that our software can make accurate concentration estimates from complex multicomponent mixtures. even when the mixture is noisy and contaminated with unknowns.

  14. TOUGH2 software qualification

    Energy Technology Data Exchange (ETDEWEB)

    Pruess, K.; Simmons, A.; Wu, Y.S.; Moridis, G.

    1996-02-01

    TOUGH2 is a numerical simulation code for multi-dimensional coupled fluid and heat flow of multiphase, multicomponent fluid mixtures in porous and fractured media. It belongs to the MULKOM ({open_quotes}MULti-KOMponent{close_quotes}) family of codes and is a more general version of the TOUGH simulator. The MULKOM family of codes was originally developed with a focus on geothermal reservoir simulation. They are suited to modeling systems which contain different fluid mixtures, with applications to flow problems arising in the context of high-level nuclear waste isolation, oil and gas recovery and storage, and groundwater resource protection. TOUGH2 is essentially a subset of MULKOM, consisting of a selection of the better tested and documented MULKOM program modules. The purpose of this package of reports is to provide all software baseline documents necessary for the software qualification of TOUGH2.

  15. Event Filter Dataflow Software

    CERN Document Server

    Meessen, C; Bosman, M; Karr, K M; Pacheco, A; Qian, Z; Touchard, F

    2000-01-01

    This document describes the software handling the flow of events through the Event Filter. This is the fourth iteration of the implementation of the code. When compared to previous versions, enhancements come from the feedback by users and can be seen as simplifications while the interfaces have been kept identical. The high level design of the dataflow is briefly reminded. Then, the details of the implementation of the components are given.

  16. Spreadsheet Auditing Software

    OpenAIRE

    2010-01-01

    It is now widely accepted that errors in spreadsheets are both common and potentially dangerous. Further research has taken place to investigate how frequently these errors occur, what impact they have, how the risk of spreadsheet errors can be reduced by following spreadsheet design guidelines and methodologies, and how effective auditing of a spreadsheet is in the detection of these errors. However, little research exists to establish the usefulness of software tools in the auditing of spre...

  17. Software Reliability Study

    Science.gov (United States)

    1976-08-01

    8217.’ r tiy tziz zzl 4N - . . . .1-- . . . . . ..-_.. .._’. +/. . _ ... . . "- - 7 4 I _ -$1_L_ ’ i - igue43. Sfi Prolem . Nube ofrce (Sheet--6-of-10...3 I ..,i , I ,t.- " -T- Figure ~~ ~ -r 4--0 Softwar Pro--le-ms V-... Nube of.....lnPrgamLe -(Sheet 7 of 10) - ---- . - ,>1 IT -1 89 ..... - SLOPE

  18. ThermalTracker Software

    Energy Technology Data Exchange (ETDEWEB)

    2016-08-10

    The software processes recorded thermal video and detects the flight tracks of birds and bats that passed through the camera's field of view. The output is a set of images that show complete flight tracks for any detections, with the direction of travel indicated and the thermal image of the animal delineated. A report of the descriptive features of each detected track is also output in the form of a comma-separated value text file.

  19. Addressing Software Security

    Science.gov (United States)

    Bailey, Brandon

    2015-01-01

    Historically security within organizations was thought of as an IT function (web sites/servers, email, workstation patching, etc.) Threat landscape has evolved (Script Kiddies, Hackers, Advanced Persistent Threat (APT), Nation States, etc.) Attack surface has expanded -Networks interconnected!! Some security posture factors Network Layer (Routers, Firewalls, etc.) Computer Network Defense (IPS/IDS, Sensors, Continuous Monitoring, etc.) Industrial Control Systems (ICS) Software Security (COTS, FOSS, Custom, etc.)

  20. Software Systems Stockroom

    Science.gov (United States)

    2009-11-01

    mentioned, the SPP is maintained by Vanderbilt University and is distributed as open-source software via the ESCHER web portal. (Detailed, web-based SPP...user documentation is also maintained on the ESCHER site as well.) Due to this preexisting distribution mechanism, it was decided to leverage the...Contribute with data reach-back use case, and model the Stockroom SPP artifact with a URL link to the remote data payload (on the ESCHER web portal

  1. Statistical Software Engineering

    Science.gov (United States)

    2007-11-02

    Institute acts under the responsibility given to the National Academy of Sciences by its congressional charter to be an adviser to the federal government...research in software visualization—the use of typography, graphic design, animation, and cinematography to facilitate the understanding and...components. One of its major functions is to act as the central repository for all relevant project data (statistical or nonstatistical). Thus this

  2. Software Security Knowledge: Training

    Science.gov (United States)

    2011-05-01

    An Overview of the Steps: (IS C)’ ® 5-day CSSLP CB~ Education Program Educate yourself and leam security best practices and Industry standards for...the software llfecycle through the CSSLP Education Program.(lscr provides education your way to fit your life and schedule.Completlng this course will...Threat Classification last ed~ed by 8 Robert Auger 10 months, 3 weeks ago u Page hlstol’f ~ Check for plagiarism Threat Classification ’Taxonomy

  3. A Multitouch Software Architecture

    OpenAIRE

    Florian Echtler; Gudrun Klinker

    2017-01-01

    In recent years, a large amount of software for multitouch in- terfaces with various degrees of similarity has been written. In order to improve interoperability, we aim to identify the common traits of these systems and present a layered soft- ware architecture which abstracts these similarities by defin- ing common interfaces between these layers. This provides developers with a unified view of the various types of mul- titouch hardware. Moreover, the layered architecture allows easy integr...

  4. Unified Engineering Software System

    Science.gov (United States)

    Purves, L. R.; Gordon, S.; Peltzman, A.; Dube, M.

    1989-01-01

    Collection of computer programs performs diverse functions in prototype engineering. NEXUS, NASA Engineering Extendible Unified Software system, is research set of computer programs designed to support full sequence of activities encountered in NASA engineering projects. Sequence spans preliminary design, design analysis, detailed design, manufacturing, assembly, and testing. Primarily addresses process of prototype engineering, task of getting single or small number of copies of product to work. Written in FORTRAN 77 and PROLOG.

  5. Avoidable Software Procurements

    Science.gov (United States)

    2012-09-01

    SET) Adobe Desktop and Server software at up to 60% off GSA TLP level 1 pricing. Autodesk Included in this award are over two dozen AutoCAD and...environmentally friendly; less CDs/DVSs, less plastic CD/DVD covers, less cardboard packaging, and less paper manuals . D. THREATS 1. Security a...pilot. There were 54 test cases which were manually executed multiple times in order to evaluate how the proposed check-in/check-out pilot system would

  6. Software for Spatial Statistics

    Directory of Open Access Journals (Sweden)

    Edzer Pebesma

    2015-02-01

    Full Text Available We give an overview of the papers published in this special issue on spatial statistics, of the Journal of Statistical Software. 21 papers address issues covering visualization (micromaps, links to Google Maps or Google Earth, point pattern analysis, geostatistics, analysis of areal aggregated or lattice data, spatio-temporal statistics, Bayesian spatial statistics, and Laplace approximations. We also point to earlier publications in this journal on the same topic.

  7. Software for Spatial Statistics

    OpenAIRE

    Edzer Pebesma; Roger Bivand; Paulo Justiniano Ribeiro

    2015-01-01

    We give an overview of the papers published in this special issue on spatial statistics, of the Journal of Statistical Software. 21 papers address issues covering visualization (micromaps, links to Google Maps or Google Earth), point pattern analysis, geostatistics, analysis of areal aggregated or lattice data, spatio-temporal statistics, Bayesian spatial statistics, and Laplace approximations. We also point to earlier publications in this journal on the same topic.

  8. Software Intensive Systems

    Science.gov (United States)

    2006-07-01

    Not an acronym, the language was named after August Ada , Countess of Lovelace , purported to be the first programmer. ARCI/APB Acoustic Rapid COTS...Software Engineering Institute, has had a significant lasting effect. Two others were the creation of the Ada programming language and the STARS program...Definition ABM/GIFC Advanced Battle Manager/Global Integrated Fire Control Ada The name of the DOD programming language mandated in the 1980s

  9. Office software Individual coaching

    CERN Multimedia

    HR Department

    2010-01-01

    If one or several particular topics cause you sleepless nights, you can get the help of our trainer who will come to your workplace for a multiple of 1-hour slots . All fields in which our trainer can help are detailed in the course description in our training catalogue (Microsoft Office software, Adobe applications, i-applications etc.). Please discover these new courses in our catalogue! Tel. 74924

  10. The Software Engineering Prototype.

    Science.gov (United States)

    1983-06-01

    charts, graphics , color pictures, and other aids should be used to enhance communications between users and designers: verbal descripticns alone are just...ccncludes by showing how the set of seven desing elements are supported by software prototypes. B. TBE PROTOTYPE PRCCESS ’he terms rotc%_vPe and pRototype...formulation of the solution (and vice versa)--there is an explicit understanding between the desinger and user about basic assumptions that will be made

  11. Introduction to Software Design

    Science.gov (United States)

    1989-01-01

    providing a well-structured intro- duction to the use of formal methods. The section Jensen79 on specification of the UNIX filing system may in- Jensen, IL W...for Analysts and Programmers. Englewood Kernighan , B. W., and P. Plauger. Software Tools. Cliffs, N. J.: Prentice-Hall, 1984. ISBN 0-13- Reading... UNIX philosophy of providing small, independent tools and linking these together to pro- duce more powerful tools tailored for specific pur- poses

  12. Image Processing Software

    Science.gov (United States)

    1992-01-01

    To convert raw data into environmental products, the National Weather Service and other organizations use the Global 9000 image processing system marketed by Global Imaging, Inc. The company's GAE software package is an enhanced version of the TAE, developed by Goddard Space Flight Center to support remote sensing and image processing applications. The system can be operated in three modes and is combined with HP Apollo workstation hardware.

  13. Computer games and software engineering

    CERN Document Server

    Cooper, Kendra M L

    2015-01-01

    Computer games represent a significant software application domain for innovative research in software engineering techniques and technologies. Game developers, whether focusing on entertainment-market opportunities or game-based applications in non-entertainment domains, thus share a common interest with software engineers and developers on how to best engineer game software.Featuring contributions from leading experts in software engineering, the book provides a comprehensive introduction to computer game software development that includes its history as well as emerging research on the inte

  14. Terminological recommendations for software localization

    Directory of Open Access Journals (Sweden)

    Klaus-Dirk Schmitz

    2012-08-01

    Full Text Available After an explosive growth of data processing and software starting at the beginning of the 1980s, the software industry shifted toward a strong orientation in non-US markets at the beginning of the 1990s. Today we see the global marketing of software in almost all regions of the world. Since software is no longer used by IT experts only, and since European and national regulations require user interfaces, manuals and documentation to be provided in the language of the customer, the market for software translation, i.e. for software localization, is the fastest growing market in the translation business.

  15. Terminological recommendations for software localization

    Directory of Open Access Journals (Sweden)

    Klaus-Dirk Schmitz

    2009-03-01

    Full Text Available After an explosive growth of data processing and software starting at the beginning of the 1980s, the software industry shifted toward a strong orientation in non-US markets at the beginning of the 1990s. Today we see the global marketing of software in almost all regions of the world. Since software is no longer used by IT experts only, and since European and national regulations require user interfaces, manuals and documentation to be provided in the language of the customer, the market for software translation, i.e. for software localization, is the fastest growing market in the translation business.

  16. Wildlife software: procedures for publication of computer software

    Science.gov (United States)

    Samuel, M.D.

    1990-01-01

    Computers and computer software have become an integral part of the practice of wildlife science. Computers now play an important role in teaching, research, and management applications. Because of the specialized nature of wildlife problems, specific computer software is usually required to address a given problem (e.g., home range analysis). This type of software is not usually available from commercial vendors and therefore must be developed by those wildlife professionals with particular skill in computer programming. Current journal publication practices generally prevent a detailed description of computer software associated with new techniques. In addition, peer review of journal articles does not usually include a review of associated computer software. Thus, many wildlife professionals are usually unaware of computer software that would meet their needs or of major improvements in software they commonly use. Indeed most users of wildlife software learn of new programs or important changes only by word of mouth.

  17. The Ettention software package.

    Science.gov (United States)

    Dahmen, Tim; Marsalek, Lukas; Marniok, Nico; Turoňová, Beata; Bogachev, Sviatoslav; Trampert, Patrick; Nickels, Stefan; Slusallek, Philipp

    2016-02-01

    We present a novel software package for the problem "reconstruction from projections" in electron microscopy. The Ettention framework consists of a set of modular building-blocks for tomographic reconstruction algorithms. The well-known block iterative reconstruction method based on Kaczmarz algorithm is implemented using these building-blocks, including adaptations specific to electron tomography. Ettention simultaneously features (1) a modular, object-oriented software design, (2) optimized access to high-performance computing (HPC) platforms such as graphic processing units (GPU) or many-core architectures like Xeon Phi, and (3) accessibility to microscopy end-users via integration in the IMOD package and eTomo user interface. We also provide developers with a clean and well-structured application programming interface (API) that allows for extending the software easily and thus makes it an ideal platform for algorithmic research while hiding most of the technical details of high-performance computing. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. FPGAs for software programmers

    CERN Document Server

    Hannig, Frank; Ziener, Daniel

    2016-01-01

    This book makes powerful Field Programmable Gate Array (FPGA) and reconfigurable technology accessible to software engineers by covering different state-of-the-art high-level synthesis approaches (e.g., OpenCL and several C-to-gates compilers). It introduces FPGA technology, its programming model, and how various applications can be implemented on FPGAs without going through low-level hardware design phases. Readers will get a realistic sense for problems that are suited for FPGAs and how to implement them from a software designer’s point of view. The authors demonstrate that FPGAs and their programming model reflect the needs of stream processing problems much better than traditional CPU or GPU architectures, making them well-suited for a wide variety of systems, from embedded systems performing sensor processing to large setups for Big Data number crunching. This book serves as an invaluable tool for software designers and FPGA design engineers who are interested in high design productivity through behavi...

  19. JPI UML Software Modeling

    Directory of Open Access Journals (Sweden)

    Cristian Vidal Silva

    2015-12-01

    Full Text Available Aspect-Oriented Programming AOP extends object-oriented programming OOP with aspects to modularize crosscutting behavior on classes by means of aspects to advise base code in the occurrence of join points according to pointcut rules definition. However, join points introduce dependencies between aspects and base code, a great issue to achieve an effective independent development of software modules. Join Point Interfaces JPI represent join points using interfaces between classes and aspect, thus these modules do not depend of each other. Nevertheless, since like AOP, JPI is a programming methodology; thus, for a complete aspect-oriented software development process, it is necessary to define JPI requirements and JPI modeling phases. Towards previous goal, this article proposes JPI UML class and sequence diagrams for modeling JPI software solutions. A purpose of these diagrams is to facilitate understanding the structure and behavior of JPI programs. As an application example, this article applies the JPI UML diagrams proposal on a case study and analyzes the associated JPI code to prove their hegemony.

  20. The ALMA software architecture

    Science.gov (United States)

    Schwarz, Joseph; Farris, Allen; Sommer, Heiko

    2004-09-01

    The software for the Atacama Large Millimeter Array (ALMA) is being developed by many institutes on two continents. The software itself will function in a distributed environment, from the 0.5-14 kmbaselines that separate antennas to the larger distances that separate the array site at the Llano de Chajnantor in Chile from the operations and user support facilities in Chile, North America and Europe. Distributed development demands 1) interfaces that allow separated groups to work with minimal dependence on their counterparts at other locations; and 2) a common architecture to minimize duplication and ensure that developers can always perform similar tasks in a similar way. The Container/Component model provides a blueprint for the separation of functional from technical concerns: application developers concentrate on implementing functionality in Components, which depend on Containers to provide them with services such as access to remote resources, transparent serialization of entity objects to XML, logging, error handling and security. Early system integrations have verified that this architecture is sound and that developers can successfully exploit its features. The Containers and their services are provided by a system-orienteddevelopment team as part of the ALMA Common Software (ACS), middleware that is based on CORBA.

  1. Terra Harvest software architecture

    Science.gov (United States)

    Humeniuk, Dave; Klawon, Kevin

    2012-06-01

    Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

  2. Software design practice using two SCADA software packages

    DEFF Research Database (Denmark)

    Basse, K.P.; Christensen, Georg Kronborg; Frederiksen, P. K.

    1996-01-01

    Typical software development for manufacturing control is done either by specialists with consideral real-time programming experience or done by the adaptation of standard software packages for manufacturing control. After investigation and test of two commercial software packages: "InTouch" and ......Touch" and "Fix", it is argued, that a more efficient software solution can be achieved by utilising an integrated specification for SCADA and PLC-programming. Experiences gained from process control is planned investigated for descrete parts manufacturing....

  3. Software design practice using two SCADA software packages

    DEFF Research Database (Denmark)

    Basse, K.P.; Christensen, Georg Kronborg; Frederiksen, P. K.

    1996-01-01

    Typical software development for manufacturing control is done either by specialists with consideral real-time programming experience or done by the adaptation of standard software packages for manufacturing control. After investigation and test of two commercial software packages: "InTouch" and ......Touch" and "Fix", it is argued, that a more efficient software solution can be achieved by utilising an integrated specification for SCADA and PLC-programming. Experiences gained from process control is planned investigated for descrete parts manufacturing....

  4. Software engineering methodologies and tools

    Science.gov (United States)

    Wilcox, Lawrence M.

    1993-01-01

    Over the years many engineering disciplines have developed, including chemical, electronic, etc. Common to all engineering disciplines is the use of rigor, models, metrics, and predefined methodologies. Recently, a new engineering discipline has appeared on the scene, called software engineering. For over thirty years computer software has been developed and the track record has not been good. Software development projects often miss schedules, are over budget, do not give the user what is wanted, and produce defects. One estimate is there are one to three defects per 1000 lines of deployed code. More and more systems are requiring larger and more complex software for support. As this requirement grows, the software development problems grow exponentially. It is believed that software quality can be improved by applying engineering principles. Another compelling reason to bring the engineering disciplines to software development is productivity. It has been estimated that productivity of producing software has only increased one to two percent a year in the last thirty years. Ironically, the computer and its software have contributed significantly to the industry-wide productivity, but computer professionals have done a poor job of using the computer to do their job. Engineering disciplines and methodologies are now emerging supported by software tools that address the problems of software development. This paper addresses some of the current software engineering methodologies as a backdrop for the general evaluation of computer assisted software engineering (CASE) tools from actual installation of and experimentation with some specific tools.

  5. The software invention cube: A classification scheme for software inventions

    NARCIS (Netherlands)

    Bergstra, J.A.; Klint, P.

    2008-01-01

    The patent system protects inventions. The requirement that a software invention should make ‘a technical contribution’ turns out to be untenable in practice and this raises the question, what constitutes an invention in the realm of software. The authors developed the Software Invention Cube (SWIC)

  6. The software invention cube: A classification scheme for software inventions

    NARCIS (Netherlands)

    J.A. Bergstra; P. Klint (Paul)

    2008-01-01

    htmlabstractThe patent system protects inventions. The requirement that a software invention should make ‘a technical contribution’ turns out to be untenable in practice and this raises the question, what constitutes an invention in the realm of software. The authors developed the Software Invention

  7. FLOOD MODELING OF THE VUKA RIVER SECTION UPSTREAM OF ITS CONFLUENCE WITH THE DANUBE RIVER

    Directory of Open Access Journals (Sweden)

    Dario Marić

    2016-12-01

    Full Text Available In this paper, a section of the Vuka River from its confluence with the Danube River in Vukovar to 3 + 630 rkm was modeled. The possibility and size of floods in the surrounding area were analyzed for different return periods (2, 5, 10, 50, and 100 yrs. Although the high-water levels of the Danube River are lower than the terrain elevation of Vukovar, they cause backwater in the Vuka River and in its tributary, the Bobotski canal. In that indirect way, the surrounding area is endangered and the efficiency of drainage systems is reduced. The existing riverbed of the analyzed Vuka River section was digitalized based on a digital terrain model using the geographic information system (GIS software ArcGIS and the HEC-GeoRAS toolbar. A mathematical model of the steady-state flow of the Vuka river section using the digitized riverbed was executed in the HEC-RAS software using different return periods. The obtained velocities and water levels were analyzed using HEC-RAS, and the sizes of the flooded areas were calculated and observed in ArcGIS.

  8. Improving Software Citation and Credit

    CERN Document Server

    Allen, Alice; DuPrie, Kimberly; Mink, Jessica; Nemiroff, Robert; Robitaille, Thomas; Shamir, Lior; Shortridge, Keith; Taylor, Mark; Teuben, Peter; Wallin, John

    2015-01-01

    The past year has seen movement on several fronts for improving software citation, including the Center for Open Science's Transparency and Openness Promotion (TOP) Guidelines, the Software Publishing Special Interest Group that was started at January's AAS meeting in Seattle at the request of that organization's Working Group on Astronomical Software, a Sloan-sponsored meeting at GitHub in San Francisco to begin work on a cohesive research software citation-enabling platform, the work of Force11 to "transform and improve" research communication, and WSSSPE's ongoing efforts that include software publication, citation, credit, and sustainability. Brief reports on these efforts were shared at the BoF, after which participants discussed ideas for improving software citation, generating a list of recommendations to the community of software authors, journal publishers, ADS, and research authors. The discussion, recommendations, and feedback will help form recommendations for software citation to those publishers...

  9. Software Engineering for Human Spaceflight

    Science.gov (United States)

    Fredrickson, Steven E.

    2014-01-01

    The Spacecraft Software Engineering Branch of NASA Johnson Space Center (JSC) provides world-class products, leadership, and technical expertise in software engineering, processes, technology, and systems management for human spaceflight. The branch contributes to major NASA programs (e.g. ISS, MPCV/Orion) with in-house software development and prime contractor oversight, and maintains the JSC Engineering Directorate CMMI rating for flight software development. Software engineering teams work with hardware developers, mission planners, and system operators to integrate flight vehicles, habitats, robotics, and other spacecraft elements. They seek to infuse automation and autonomy into missions, and apply new technologies to flight processor and computational architectures. This presentation will provide an overview of key software-related projects, software methodologies and tools, and technology pursuits of interest to the JSC Spacecraft Software Engineering Branch.

  10. Capturing the impact of software

    Science.gov (United States)

    Piwowar, Heather

    2017-01-01

    Research software is undervalued in funding and tenure decisions because its impact is poorly evaluated within the traditional paper-based ecosystem. The talk presents the NSF-funded Depsy project (http://depsy.org) -- a proof-of-concept system designed to address this problem by tracking the impact of software in software-native ways. Depsy finds mentions of software itself in the literature, rather than just counting citations to a wrapper paper about the software. It discovers how software gets reused by other software, even when it's not cited at all. And finally Depsy attempts to represent the full complexity of software authorship, where one project can involve hundreds of contributors in multiple roles that don't map to traditional paper authorship.

  11. Handling Software Faults with Redundancy

    Science.gov (United States)

    Carzaniga, Antonio; Gorla, Alessandra; Pezzè, Mauro

    Software engineering methods can increase the dependability of software systems, and yet some faults escape even the most rigorous and methodical development process. Therefore, to guarantee high levels of reliability in the presence of faults, software systems must be designed to reduce the impact of the failures caused by such faults, for example by deploying techniques to detect and compensate for erroneous runtime conditions. In this chapter, we focus on software techniques to handle software faults, and we survey several such techniques developed in the area of fault tolerance and more recently in the area of autonomic computing. Since practically all techniques exploit some form of redundancy, we consider the impact of redundancy on the software architecture, and we propose a taxonomy centered on the nature and use of redundancy in software systems. The primary utility of this taxonomy is to classify and compare techniques to handle software faults.

  12. Software Quality Assurance Audits Guidebooks

    Science.gov (United States)

    1990-01-01

    The growth in cost and importance of software to NASA has caused NASA to address the improvement of software development across the agency. One of the products of this program is a series of guidebooks that define a NASA concept of the assurance processes that are used in software development. The Software Assurance Guidebook, NASA-GB-A201, issued in September, 1989, provides an overall picture of the NASA concepts and practices in software assurance. Second level guidebooks focus on specific activities that fall within the software assurance discipline, and provide more detailed information for the manager and/or practitioner. This is the second level Software Quality Assurance Audits Guidebook that describes software quality assurance audits in a way that is compatible with practices at NASA Centers.

  13. Clustering Methodologies for Software Engineering

    Directory of Open Access Journals (Sweden)

    Mark Shtern

    2012-01-01

    Full Text Available The size and complexity of industrial strength software systems are constantly increasing. This means that the task of managing a large software project is becoming even more challenging, especially in light of high turnover of experienced personnel. Software clustering approaches can help with the task of understanding large, complex software systems by automatically decomposing them into smaller, easier-to-manage subsystems. The main objective of this paper is to identify important research directions in the area of software clustering that require further attention in order to develop more effective and efficient clustering methodologies for software engineering. To that end, we first present the state of the art in software clustering research. We discuss the clustering methods that have received the most attention from the research community and outline their strengths and weaknesses. Our paper describes each phase of a clustering algorithm separately. We also present the most important approaches for evaluating the effectiveness of software clustering.

  14. Design Principles for Interactive Software

    DEFF Research Database (Denmark)

    The book addresses the crucial intersection of human-computer interaction (HCI) and software engineering by asking both what users require from interactive systems and what developers need to produce well-engineered software. Needs are expressed as......The book addresses the crucial intersection of human-computer interaction (HCI) and software engineering by asking both what users require from interactive systems and what developers need to produce well-engineered software. Needs are expressed as...

  15. Formal aspects of component software

    OpenAIRE

    Sun, Meng; Schatz, B.

    2014-01-01

    This issue includes extended versions of selected best papers from the 7th International Workshop on Formal Aspects of Component Software (FACS 2010) held in Guimarães, Portugal on October 14–16, 2010. The component-based software development approach has emerged as a promising paradigm to cope with an ever increasing complexity of present-day software solutions by bringing sound production and engineering principles into software engineering. However, many conceptual and technological iss...

  16. Software engineering a practitioner's approach

    CERN Document Server

    Pressman, Roger S

    1997-01-01

    This indispensable guide to software engineering exploration enables practitioners to navigate the ins and outs of this rapidly changing field. Pressman's fully revised and updated Fourth Edition provides in-depth coverage of every important management and technical topic in software engineering. Moreover, readers will find the inclusion of the hottest developments in the field such as: formal methods and cleanroom software engineering, business process reengineering, and software reengineering.

  17. Teaching Software Engineering through Robotics

    OpenAIRE

    Shin, Jiwon; Rusakov, Andrey; Meyer, Bertrand

    2014-01-01

    This paper presents a newly-developed robotics programming course and reports the initial results of software engineering education in robotics context. Robotics programming, as a multidisciplinary course, puts equal emphasis on software engineering and robotics. It teaches students proper software engineering -- in particular, modularity and documentation -- by having them implement four core robotics algorithms for an educational robot. To evaluate the effect of software engineering educati...

  18. Software Security Requirements Gathering Instrument

    OpenAIRE

    2011-01-01

    Security breaches are largely caused by the vulnerable software. Since individuals and organizations mostly depend on softwares, it is important to produce in secured manner. The first step towards producing secured software is through gathering security requirements. This paper describes Software Security Requirements Gathering Instrument (SSRGI) that helps gather security requirements from the various stakeholders. This will guide the developers to gather security requirements along with th...

  19. Software Validation using Power Profiles

    OpenAIRE

    Lencevicius, Raimondas; Metz, Edu; Ran, Alexander

    2002-01-01

    The validation of modern software systems incorporates both functional and quality requirements. This paper proposes a validation approach for software quality requirement - its power consumption. This approach validates whether the software produces the desired results with a minimum expenditure of energy. We present energy requirements and an approach for their validation using a power consumption model, test-case specification, software traces, and power measurements. Three different appro...

  20. The Software Management Environment (SME)

    Science.gov (United States)

    Valett, Jon D.; Decker, William; Buell, John

    1988-01-01

    The Software Management Environment (SME) is a research effort designed to utilize the past experiences and results of the Software Engineering Laboratory (SEL) and to incorporate this knowledge into a tool for managing projects. SME provides the software development manager with the ability to observe, compare, predict, analyze, and control key software development parameters such as effort, reliability, and resource utilization. The major components of the SME, the architecture of the system, and examples of the functionality of the tool are discussed.

  1. GNSS Software Receiver for UAVs

    DEFF Research Database (Denmark)

    Olesen, Daniel Madelung; Jakobsen, Jakob; von Benzon, Hans-Henrik

    2016-01-01

    This paper describes the current activities of GPS/GNSS Software receiver development at DTU Space. GNSS Software receivers have received a great deal of attention in the last two decades and numerous implementations have already been presented. DTU Space has just recently started development of ...... of our own GNSS software-receiver targeted for mini UAV applications, and we will in in this paper present our current progress and briefly discuss the benefits of Software Receivers in relation to our research interests....

  2. Gammasphere software development. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Piercey, R.B.

    1994-01-01

    This report describes the activities of the nuclear physics group at Mississippi State University which were performed during 1993. Significant progress has been made in the focus areas: chairing the Gammasphere Software Working Group (SWG); assisting with the porting and enhancement of the ORNL UPAK histogramming software package; and developing standard formats for Gammasphere data products. In addition, they have established a new public ftp archive to distribute software and software development tools and information.

  3. Research on Software-Cell-Based Software System

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The aim of research on software architecture is to improve the quality attributes of software sys tems, such as security, reliability, maintainability, testability , reassembility , evolvability. However, a sin gle running system is hard to achieve all these goals. In this paper, software-cell is introduced as the basic u nit throughout developing process. Then it is further advanced that a robust, safe and high-quality software system is composed of a running system and four supportive systems. This paper especially discusses the structure of software-cell, the construction of the five systems, and the relations between them.

  4. Model-based Software Engineering

    DEFF Research Database (Denmark)

    2010-01-01

    The vision of model-based software engineering is to make models the main focus of software development and to automatically generate software from these models. Part of that idea works already today. But, there are still difficulties when it comes to behaviour. Actually, there is no lack in models...

  5. Free Software and Free Textbooks

    Science.gov (United States)

    Takhteyev, Yuri

    2012-01-01

    Some of the world's best and most sophisticated software is distributed today under "free" or "open source" licenses, which allow the recipients of such software to use, modify, and share it without paying royalties or asking for permissions. If this works for software, could it also work for educational resources, such as books? The economics of…

  6. NASA's Approach to Software Assurance

    Science.gov (United States)

    Wetherholt, Martha

    2015-01-01

    NASA defines software assurance as: the planned and systematic set of activities that ensure conformance of software life cycle processes and products to requirements, standards, and procedures via quality, safety, reliability, and independent verification and validation. NASA's implementation of this approach to the quality, safety, reliability, security and verification and validation of software is brought together in one discipline, software assurance. Organizationally, NASA has software assurance at each NASA center, a Software Assurance Manager at NASA Headquarters, a Software Assurance Technical Fellow (currently the same person as the SA Manager), and an Independent Verification and Validation Organization with its own facility. An umbrella risk mitigation strategy for safety and mission success assurance of NASA's software, software assurance covers a wide area and is better structured to address the dynamic changes in how software is developed, used, and managed, as well as it's increasingly complex functionality. Being flexible, risk based, and prepared for challenges in software at NASA is essential, especially as much of our software is unique for each mission.

  7. Software product lines : Organizational alternatives

    NARCIS (Netherlands)

    Bosch, J

    2001-01-01

    Software product lines enjoy increasingly wide adoption in the software industry. Most authors focus on the technical and process aspects and assume an organizational model consisting of a domain engineering unit and several application engineering units. In our cooperation with several software dev

  8. Free Software and Free Textbooks

    Science.gov (United States)

    Takhteyev, Yuri

    2012-01-01

    Some of the world's best and most sophisticated software is distributed today under "free" or "open source" licenses, which allow the recipients of such software to use, modify, and share it without paying royalties or asking for permissions. If this works for software, could it also work for educational resources, such as books? The economics of…

  9. Model-based Software Engineering

    DEFF Research Database (Denmark)

    2010-01-01

    The vision of model-based software engineering is to make models the main focus of software development and to automatically generate software from these models. Part of that idea works already today. But, there are still difficulties when it comes to behaviour. Actually, there is no lack in models...

  10. Software Startups - A Research Agenda

    Directory of Open Access Journals (Sweden)

    Michael Unterkalmsteiner

    2016-10-01

    Full Text Available Software startup companies develop innovative, software-intensive products within limited time frames and with few resources, searching for sustainable and scalable business models. Software startups are quite distinct from traditional mature software companies, but also from micro-, small-, and medium-sized enterprises, introducing new challenges relevant for software engineering research. This paper's research agenda focuses on software engineering in startups, identifying, in particular, 70+ research questions in the areas of supporting startup engineering activities, startup evolution models and patterns, ecosystems and innovation hubs, human aspects in software startups, applying startup concepts in non-startup environments, and methodologies and theories for startup research. We connect and motivate this research agenda with past studies in software startup research, while pointing out possible future directions. While all authors of this research agenda have their main background in Software Engineering or Computer Science, their interest in software startups broadens the perspective to the challenges, but also to the opportunities that emerge from multi-disciplinary research. Our audience is therefore primarily software engineering researchers, even though we aim at stimulating collaborations and research that crosses disciplinary boundaries. We believe that with this research agenda we cover a wide spectrum of the software startup industry current needs.

  11. Software product lines : Organizational alternatives

    NARCIS (Netherlands)

    Bosch, J

    2001-01-01

    Software product lines enjoy increasingly wide adoption in the software industry. Most authors focus on the technical and process aspects and assume an organizational model consisting of a domain engineering unit and several application engineering units. In our cooperation with several software

  12. Software product lines : Organizational alternatives

    NARCIS (Netherlands)

    Bosch, J

    2001-01-01

    Software product lines enjoy increasingly wide adoption in the software industry. Most authors focus on the technical and process aspects and assume an organizational model consisting of a domain engineering unit and several application engineering units. In our cooperation with several software dev

  13. Visual assessment of software evolution

    NARCIS (Netherlands)

    Voinea, Lucian; Lukkien, Johan; Telea, Alexandru

    2007-01-01

    Configuration management tools have become well and widely accepted by the software industry. Software Configuration Management (SCM) systems hold minute information about the entire evolution of complex software systems and thus represent a good source for process accounting and auditing. However,

  14. Visual assessment of software evolution

    NARCIS (Netherlands)

    Voinea, Lucian; Lukkien, Johan; Telea, Alexandru

    2007-01-01

    Configuration management tools have become well and widely accepted by the software industry. Software Configuration Management (SCM) systems hold minute information about the entire evolution of complex software systems and thus represent a good source for process accounting and auditing. However,

  15. Software Vulnerability Taxonomy Consolidation

    Energy Technology Data Exchange (ETDEWEB)

    Polepeddi, Sriram S. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

    2004-12-07

    In today's environment, computers and networks are increasing exposed to a number of software vulnerabilities. Information about these vulnerabilities is collected and disseminated via various large publicly available databases such as BugTraq, OSVDB and ICAT. Each of these databases, individually, do not cover all aspects of a vulnerability and lack a standard format among them, making it difficult for end-users to easily compare various vulnerabilities. A central database of vulnerabilities has not been available until today for a number of reasons, such as the non-uniform methods by which current vulnerability database providers receive information, disagreement over which features of a particular vulnerability are important and how best to present them, and the non-utility of the information presented in many databases. The goal of this software vulnerability taxonomy consolidation project is to address the need for a universally accepted vulnerability taxonomy that classifies vulnerabilities in an unambiguous manner. A consolidated vulnerability database (CVDB) was implemented that coalesces and organizes vulnerability data from disparate data sources. Based on the work done in this paper, there is strong evidence that a consolidated taxonomy encompassing and organizing all relevant data can be achieved. However, three primary obstacles remain: lack of referencing a common ''primary key'', un-structured and free-form descriptions of necessary vulnerability data, and lack of data on all aspects of a vulnerability. This work has only considered data that can be unambiguously extracted from various data sources by straightforward parsers. It is felt that even with the use of more advanced, information mining tools, which can wade through the sea of unstructured vulnerability data, this current integration methodology would still provide repeatable, unambiguous, and exhaustive results. Though the goal of coalescing all available data

  16. Software is a directed multigraph (and so is software process)

    CERN Document Server

    Dabrowski, Robert; Timoszuk, Grzegorz

    2011-01-01

    For a software system, its architecture is typically defined as the fundamental organization of the system incorporated by its components, their relationships to one another and their environment, and the principles governing their design. If contributed to by the artifacts coresponding to engineering processes that govern the system's evolution, the definition gets natually extended into the architecture of software and software process. Obviously, as long as there were no software systems, managing their architecture was no problem at all; when there were only small systems, managing their architecture became a mild problem; and now we have gigantic software systems, and managing their architecture has become an equally gigantic problem (to paraphrase Edsger Dijkstra). In this paper we propose a simple, yet we believe effective, model for organizing architecture of software systems. First of all we postulate that only a hollistic approach that supports continuous integration and verification for all softwar...

  17. Software Design Improvements. Part 1; Software Benefits and Limitations

    Science.gov (United States)

    Lalli, Vincent R.; Packard, Michael H.; Ziemianski, Tom

    1997-01-01

    Computer hardware and associated software have been used for many years to process accounting information, to analyze test data and to perform engineering analysis. Now computers and software also control everything from automobiles to washing machines and the number and type of applications are growing at an exponential rate. The size of individual program has shown similar growth. Furthermore, software and hardware are used to monitor and/or control potentially dangerous products and safety-critical systems. These uses include everything from airplanes and braking systems to medical devices and nuclear plants. The question is: how can this hardware and software be made more reliable? Also, how can software quality be improved? What methodology needs to be provided on large and small software products to improve the design and how can software be verified?

  18. The software factory: A fourth generation software engineering environment

    Energy Technology Data Exchange (ETDEWEB)

    Evans, M.W.

    1989-01-01

    The software-development process and its management are examined in a text intended for engineering managers and students of computer science. A unified concept based on the principle that software design is an engineering science rather than an art is applied, and a software engineering environment (SEE) analogous to an industrial plant is proposed. Chapters are devoted to the classical software environment, the history of software engineering, the evolution of the SEE, the fourth-generation SEE, the engineering process, software-data relationships, the SEE data base, data control in the SEE, software life cycles, information-system product assurance, business management and control, and automating and adapting the SEE. 143 refs.

  19. Self-organising software

    CERN Document Server

    Serugendo, Giovanna Di Marzo; Karageorgos, Anthony

    2011-01-01

    Self-organisation, self-regulation, self-repair and self-maintenance are promising conceptual approaches for dealing with complex distributed interactive software and information-handling systems. Self-organising applications dynamically change their functionality and structure without direct user intervention, responding to changes in requirements and the environment. This is the first book to offer an integrated view of self-organisation technologies applied to distributed systems, particularly focusing on multiagent systems. The editors developed this integrated book with three aims: to exp

  20. Open Source Software Acquisition

    DEFF Research Database (Denmark)

    Holck, Jesper; Kühn Pedersen, Mogens; Holm Larsen, Michael

    2005-01-01

    Lately we have seen a growing interest from both public and private organisations to adopt OpenSource Software (OSS), not only for a few, specific applications but also on a more general levelthroughout the organisation. As a consequence, the organisations' decisions on adoption of OSS arebecoming......, in smaller organisations and in small-scale adoption of OSS, the cheapprice of OSS is a major enabler, as it provides a good opportunity for experiments and short-termeconomic benefits. For small organisations these experiments can lead to development of a commonIT-architecture, and in larger organisations...

  1. Office software Individual coaching

    CERN Multimedia

    HR Department

    2010-01-01

    If one or several particular topics cause you sleepless nights, you can get help from our trainer who will come to your workplace for a multiple of 1-hour slots . All fields in which our trainer can help are detailed in the course description in our training catalogue (Microsoft Office software, Adobe applications, i-applications etc.) Discover these new courses in our catalogue! http://cta.cern.ch/cta2/f?p=110:9 Technical Training Service Technical.Training@cern.ch Tel 74924

  2. Software Process Improvement

    DEFF Research Database (Denmark)

    Kuhrmann, Marco; Konopka, Claudia; Nellemann, Peter

    2016-01-01

    Software process improvement (SPI) is around for decades: frameworks are proposed, success factors are studied, and experiences have been reported. However, the sheer mass of concepts, approaches, and standards published over the years overwhelms practitioners as well as researchers. What is out...... directions. An analysis of 635 publications draws a big picture of SPI-related research of the past 25 years. Our study shows a high number of solution proposals, experience reports, and secondary studies, but only few theories. In particular, standard SPI models are analyzed and evaluated for applicability...

  3. IMPROVEMENTS OF RIVER MODELING 1D DATA PREPARATION

    Directory of Open Access Journals (Sweden)

    ION-MARIAN MOISOIU

    2012-11-01

    Full Text Available Improvements of river modeling 1D data preparation. The importance of hydrographical networks data and the need for detailed studies do generate an increase of projects in this specialized area and a diversification of river mathematical modeling software. River mathematical modeling can be done in two ways, namely; the "2D mode" and the “1D mode”. The “2D mode” is where a digital terrain model of a full hydrographical basin must be produced and "1D mode" is where only cross sections, long sections and structures elevations needs to be presented in a graphical environment and in a specific formats for the mathematical modeling software. This paper will show the principle of a custom built GIS, specially created to help the preparation of 1D river modeling data. The benefits are; elimination of human errors, automated processing, increasing productivity, flexible output and cost reduction.

  4. Entretian Model for Software Maintenance

    Directory of Open Access Journals (Sweden)

    Priya K Betala

    2013-10-01

    Full Text Available Maintenance refers to the act of modifying the software after putting in use in order to maintain its usability.[1]. In other words, Software maintenance can be defined as; it is the process of providing services to the customers after the delivery of the software. Despite the fact that maintaining software is very challenging, it is the most important routine that must be carried out in the development cycle. If the software is not maintained efficiently it may lead to the death of the software. Maintenance of software may be carried out in two ways. The first one is called „In-house maintenance‟ and the second one is called „Transition maintenance‟. The latter faces the drastic challenges when compared to former, as one team may not provide complete source code to the other, leading to unstructured code, lack of appropriate technique and knowledge about the functioning of the current software. There are a few aspects of software maintenance that set it apart from the other phases. Software maintenance cost comprises more than half of the total software development cost. Also, without software maintenance, it is impossible to change the problems within the product after its release, and many disasters can happen because of immature software. Recognising the importance of software maintenance, this paper proposes a model called “ENTRETIAN MODEL” (Entretian, a French word meaning Maintenance which consists of six basic steps to follow while maintaining software system. This model overcomes certain misconceptions about maintenance phase and it is highly beneficial to the Maintenance Support Team (MST to handle their maintenance activities systematically and efficiently. By employing the proposed model, the MST is able to overcome the technical and managerial issues that are faced earlier in the maintenance phase. The advantage of using “Entretian Model” is best illustrated in this paper with the help of the ERP package.

  5. Characteristics for Software Optimization Projects

    Directory of Open Access Journals (Sweden)

    Iulian NITESCU

    2008-01-01

    Full Text Available The increasing of the software systems complexity imposes the identification and implementation of some methods and techniques in order to manage it. The software optimization project is a way in which the software complexity is controlled. The software optimization project must face to the organization need to earn profit. The software optimization project is an integrated part of the application cycle because share same resources, depends on other stages and influences next phases. The optimization project has some particularities because it works on an finished product around its quality. The process is quality and performance oriented and it assumes that the product life cycle is almost finished.

  6. The Ragnarok Software Development Environment

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    1999-01-01

    Ragnarok is an experimental software development environment that focuses on enhanced support for managerial activities in large scale software development taking the daily work of the software developer as its point of departure. The main emphasis is support in three areas: management, navigation......, and collaboration. The leitmotif is the software architecture, which is extended to handle managerial data in addition to source code; this extended software architecture is put under tight version- and configuration management control and furthermore used as basis for visualisation. Preliminary results of using...

  7. Software-Defined Cluster

    Institute of Scientific and Technical Information of China (English)

    聂华; 杨晓君; 刘淘英

    2015-01-01

    The cluster architecture has played an important role in high-end computing for the past 20 years. With the advent of Internet services, big data, and cloud computing, traditional clusters face three challenges: 1) providing flexible system balance among computing, memory, and I/O capabilities;2) reducing resource pooling overheads;and 3) addressing low performance-power efficiency. This position paper proposes a software-defined cluster (SDC) architecture to deal with these challenges. The SDC architecture inherits two features of traditional cluster: its architecture is multicomputer and it has loosely-coupled interconnect. SDC provides two new mechanisms: global I/O space (GIO) and hardware-supported native access (HNA) to remote devices. Application software can define a virtual cluster best suited to its needs from resources pools provided by a physical cluster, and traditional cluster ecosystems need no modification. We also discuss a prototype design and implementation of a 32-processor cloud server utilizing the SDC architecture.

  8. Software and Computing News

    CERN Multimedia

    Barberis, D

    The last several months have been very busy ones for the ATLAS software developers. They've been trying to cope with the competing demands of multiple software stress tests and testbeds. These include Data Challenge Two (DC2), the Combined Testbeam (CTB), preparations for the Physics Workshop to be held in Rome in June 2005, and other testbeds, primarily one for the High-Level Trigger. Data Challenge 2 (DC2) The primary goal of this was to validate the computing model and to provide a test of simulating a day's worth of ATLAS data (10 million events) and of fully processing it and making it available to the physicists within 10 days (i.e. a 10% scale test). DC2 consists of three parts - the generation, simulation, and mixing of a representative sample of physics events with background events; the reconstruction of the mixed samples with initial classification into the different physics signatures; and the distribution of the data to multiple remote sites (Tier-1 centers) for analysis by physicists. Figu...

  9. CSAM Metrology Software Tool

    Science.gov (United States)

    Vu, Duc; Sandor, Michael; Agarwal, Shri

    2005-01-01

    CSAM Metrology Software Tool (CMeST) is a computer program for analysis of false-color CSAM images of plastic-encapsulated microcircuits. (CSAM signifies C-mode scanning acoustic microscopy.) The colors in the images indicate areas of delamination within the plastic packages. Heretofore, the images have been interpreted by human examiners. Hence, interpretations have not been entirely consistent and objective. CMeST processes the color information in image-data files to detect areas of delamination without incurring inconsistencies of subjective judgement. CMeST can be used to create a database of baseline images of packages acquired at given times for comparison with images of the same packages acquired at later times. Any area within an image can be selected for analysis, which can include examination of different delamination types by location. CMeST can also be used to perform statistical analyses of image data. Results of analyses are available in a spreadsheet format for further processing. The results can be exported to any data-base-processing software.

  10. Software Defined Cyberinfrastructure

    Energy Technology Data Exchange (ETDEWEB)

    Foster, Ian; Blaiszik, Ben; Chard, Kyle; Chard, Ryan

    2017-07-17

    Within and across thousands of science labs, researchers and students struggle to manage data produced in experiments, simulations, and analyses. Largely manual research data lifecycle management processes mean that much time is wasted, research results are often irreproducible, and data sharing and reuse remain rare. In response, we propose a new approach to data lifecycle management in which researchers are empowered to define the actions to be performed at individual storage systems when data are created or modified: actions such as analysis, transformation, copying, and publication. We term this approach software-defined cyberinfrastructure because users can implement powerful data management policies by deploying rules to local storage systems, much as software-defined networking allows users to configure networks by deploying rules to switches.We argue that this approach can enable a new class of responsive distributed storage infrastructure that will accelerate research innovation by allowing any researcher to associate data workflows with data sources, whether local or remote, for such purposes as data ingest, characterization, indexing, and sharing. We report on early experiments with this approach in the context of experimental science, in which a simple if-trigger-then-action (IFTA) notation is used to define rules.

  11. Mobile Acoustical Bat Monitoring Annual Summary Report CY 2012- Cache River National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — These reports summarize bat calls collected along transects at Cache River National Wildlife Refuge for the CY 2012. Calls were classified using Bat Call ID software...

  12. Mobile Acoustical Bat Monitoring Annual Summary Report CY 2014 - Coldwater River National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes bat calls collected along transects at Coldwater River NWR in 2014. Calls were classified using Bat Call ID ([BCID] version 2.5a) software and...

  13. Mobile Acoustical Bat Monitoring Annual Summary Report CY 2015- White River National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — These reports summarize bat calls collected along transects at White River National Wildlife Refuge for the CY 2015. Calls were classified using Bat Call ID software...

  14. New ATLAS Software & Computing Organization

    CERN Multimedia

    Barberis, D

    Following the election by the ATLAS Collaboration Board of Dario Barberis (Genoa University/INFN) as Computing Coordinator and David Quarrie (LBNL) as Software Project Leader, it was considered necessary to modify the organization of the ATLAS Software & Computing ("S&C") project. The new organization is based upon the following principles: separation of the responsibilities for computing management from those of software development, with the appointment of a Computing Coordinator and a Software Project Leader who are both members of the Executive Board; hierarchical structure of responsibilities and reporting lines; coordination at all levels between TDAQ, S&C and Physics working groups; integration of the subdetector software development groups with the central S&C organization. A schematic diagram of the new organization can be seen in Fig.1. Figure 1: new ATLAS Software & Computing organization. Two Management Boards will help the Computing Coordinator and the Software Project...

  15. Software Security Requirements Gathering Instrument

    Directory of Open Access Journals (Sweden)

    Smriti Jain

    2011-08-01

    Full Text Available Security breaches are largely caused by the vulnerable software. Since individuals and organizations mostly depend on softwares, it is important to produce in secured manner. The first step towards producing secured software is through gathering security requirements. This paper describes Software Security Requirements Gathering Instrument (SSRGI that helps gather security requirements from the various stakeholders. This will guide the developers to gather security requirements along with the functional requirements and further incorporate security during other phases of software development. We subsequently present case studies that describe the integration of the SSRGI instrument with Software Requirements Specification (SRS document as specified in standard IEEE 830-1998. Proposed SSRGI will support the software developers in gathering security requirements in detail during requirements gathering phase.

  16. Modernization of software quality assurance

    Science.gov (United States)

    Bhaumik, Gokul

    1988-01-01

    The customers satisfaction depends not only on functional performance, it also depends on the quality characteristics of the software products. An examination of this quality aspect of software products will provide a clear, well defined framework for quality assurance functions, which improve the life-cycle activities of software development. Software developers must be aware of the following aspects which have been expressed by many quality experts: quality cannot be added on; the level of quality built into a program is a function of the quality attributes employed during the development process; and finally, quality must be managed. These concepts have guided our development of the following definition for a Software Quality Assurance function: Software Quality Assurance is a formal, planned approach of actions designed to evaluate the degree of an identifiable set of quality attributes present in all software systems and their products. This paper is an explanation of how this definition was developed and how it is used.

  17. Software libre vs. software propietario: programando nuestro futuro

    Directory of Open Access Journals (Sweden)

    Rafael Gómez Sánchez

    2008-12-01

    Full Text Available Este trabajo estudia la evolución de dos modelos contrapuestos: el software propietario y el software libre. Mientras el primero está plenamente establecido, y apoyado por la industria tradicional de los programas de ordenador, el software libre se presenta como una atractiva alternativa que promete corregir muchas de las deficiencias de aquel modelo. Basado en la filosofía de respetar las libertades del usuario -libertad de compartir, mejorar y utilizar los programas-, son cada vez más las administraciones, empresas y demás usuarios que optan por el software libre. La interacción entre ambos modelos y sus consecuencias, así como los intentos de las multinacionales del software por no perder mercado, serán asimismo objeto de estudio.________________________ABSTRACT:This work studies the evolution of two opposed models: propietary software and free software. Meanwhile the first one is fully established, and supported by the traditional computing industry, free software appears like an attractive alternative which promises to correct many deficiencies of that model. Based on the philosophy of respecting user’s liberties -freedom of sharing, improving and using the software-, an increasing number of administrations, companies and other users are moving to the model of free software. Interactions between both models and its consequences, as well as the attempts from the software’s multinational corporations of not to lose market, will also be objects to be studied.

  18. Applied software risk management a guide for software project managers

    CERN Document Server

    Pandian, C Ravindranath

    2006-01-01

    Few software projects are completed on time, on budget, and to their original specifications. Focusing on what practitioners need to know about risk in the pursuit of delivering software projects, Applied Software Risk Management: A Guide for Software Project Managers covers key components of the risk management process and the software development process, as well as best practices for software risk identification, risk planning, and risk analysis. Written in a clear and concise manner, this resource presents concepts and practical insight into managing risk. It first covers risk-driven project management, risk management processes, risk attributes, risk identification, and risk analysis. The book continues by examining responses to risk, the tracking and modeling of risks, intelligence gathering, and integrated risk management. It concludes with details on drafting and implementing procedures. A diary of a risk manager provides insight in implementing risk management processes.Bringing together concepts ...

  19. Software and Network Engineering

    CERN Document Server

    2012-01-01

    The series "Studies in Computational Intelligence" (SCI) publishes new developments and advances in the various areas of computational intelligence – quickly and with a high quality. The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them. The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems, and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution - this permits a rapid and broad dissemination of research results.   The purpose of the first ACIS International Symposium on Software and Network Engineering held on Decembe...

  20. Software developments for gammasphere

    Energy Technology Data Exchange (ETDEWEB)

    Lauritsen, T.; Ahmad, I.; Carpenter, M.P. [and others

    1995-08-01

    This year marked the year when data acquisition development for Gammasphere evolved from planning to accomplishment, both in hardware and software. Two VME crates now contain about 10 crate-processors which are used to handle the data from VXI processors - which in turn collect the data from germanium and BGO detectors in the array. The signals from the detectors are processed and digitized in custom-built electronics boards. The processing power in the VME crates is used to digitally filter the data before they are written to tape. The goal is to have highly processed data flowing to tape, eliminating the off-line filtering and manipulation of data that was standard procedure in earlier experiments.

  1. Energy Tracking Software Platform

    Energy Technology Data Exchange (ETDEWEB)

    Ryan Davis; Nathan Bird; Rebecca Birx; Hal Knowles

    2011-04-04

    Acceleration has created an interactive energy tracking and visualization platform that supports decreasing electric, water, and gas usage. Homeowners have access to tools that allow them to gauge their use and track progress toward a smaller energy footprint. Real estate agents have access to consumption data, allowing for sharing a comparison with potential home buyers. Home builders have the opportunity to compare their neighborhood's energy efficiency with competitors. Home energy raters have a tool for gauging the progress of their clients after efficiency changes. And, social groups are able to help encourage members to reduce their energy bills and help their environment. EnergyIT.com is the business umbrella for all energy tracking solutions and is designed to provide information about our energy tracking software and promote sales. CompareAndConserve.com (Gainesville-Green.com) helps homeowners conserve energy through education and competition. ToolsForTenants.com helps renters factor energy usage into their housing decisions.

  2. Software Tool Issues

    Science.gov (United States)

    Hennell, Michael

    This chapter relies on experience with tool development gained over the last thirty years. It shows that there are a large number of techniques that contribute to any successful project, and that formality is always the key: a modern software test tool is based on a firm mathematical foundation. After a brief introduction, Section 2 recalls and extends the terminology of Chapter 1. Section 3 discusses the the design of different sorts of static and dynamic analysis tools. Nine important issues to be taken into consideration when evaluating such tools are presented in Section 4. Section 5 investigates the interplay between testing and proof. In Section 6, we call for developers to take their own medicine and verify their tools. Finally, we conclude in Section 7 with a summary of our main messages, emphasising the important role of testing.

  3. Assessing multizone airflow software

    Energy Technology Data Exchange (ETDEWEB)

    Lorenzetti, D.M.

    2001-12-01

    Multizone models form the basis of most computer simulations of airflow and pollutant transport in buildings. In order to promote computational efficiency, some multizone simulation programs, such as COMIS and CONTAM, restrict the form that their flow models may take. While these tools allow scientists and engineers to explore a wide range of building airflow problems, increasingly their use has led to new questions not answerable by the current generation of programs. This paper, directed at software developers working on the next generation of building airflow models, identifies structural aspects of COMIS and related programs that prevent them from easily incorporating desirable new airflow models. The paper also suggests criteria for evaluating alternate simulation environments for future modeling efforts.

  4. Software, Software Engineering and Software Engineering Research:Some Unconventional Thoughts

    Institute of Scientific and Technical Information of China (English)

    David Notkin

    2009-01-01

    Software engineering is broadly discussed as falling far short of expectations. Data and examples are used to justify how software itself is often poor, how the engineering of software leaves much to be desired, and how research in software engineering has not made enough progress to help overcome these weaknesses. However, these data and examples are presented and interpreted in ways that are arguably imbalanced. This imbalance, usually taken at face value, may be distracting the field from making significant progress towards improving the effective engineering of software, a goal the entire community shares. Research dichotomies, which tend to pit one approach against another, often subtly hint that there is a best way to engineer software or a best way to perform research on software. This, too, may be distracting the field from important classes of progress.

  5. PROMOTIONS: PROper MOTION Software

    Science.gov (United States)

    Caleb Wherry, John; Sahai, R.

    2009-05-01

    We report on the development of a software tool (PROMOTIONS) to streamline the process of measuring proper motions of material in expanding nebulae. Our tool makes use of IDL's widget programming capabilities to design a unique GUI that is used to compare images of the objects from two epochs. The software allows us to first orient and register the images to a common frame of reference and pixel scale, using field stars in each of the images. We then cross-correlate specific morphological features in order to determine their proper motions, which consist of the proper motion of the nebula as a whole (PM-neb), and expansion motions of the features relative to the center. If the central star is not visible (quite common in bipolar nebulae with dense dusty waists), point-symmetric expansion is assumed and we use the average motion of high-quality symmetric pairs of features on opposite sides of the nebular center to compute PM-neb. This is then subtracted out to determine the individual movements of these and additional features relative to the nebular center. PROMOTIONS should find wide applicability in measuring proper motions in astrophysical objects such as the expanding outflows/jets commonly seen around young and dying stars. We present first results from using PROMOTIONS to successfully measure proper motions in several pre-planetary nebulae (transition objects between the red giant and planetary nebula phases), using images taken 7-10 years apart with the WFPC2 and ACS instruments on board HST. The authors are grateful to NASA's Undergradute Scholars Research Program (USRP) for supporting this research.

  6. Evolvable Neural Software System

    Science.gov (United States)

    Curtis, Steven A.

    2009-01-01

    The Evolvable Neural Software System (ENSS) is composed of sets of Neural Basis Functions (NBFs), which can be totally autonomously created and removed according to the changing needs and requirements of the software system. The resulting structure is both hierarchical and self-similar in that a given set of NBFs may have a ruler NBF, which in turn communicates with other sets of NBFs. These sets of NBFs may function as nodes to a ruler node, which are also NBF constructs. In this manner, the synthetic neural system can exhibit the complexity, three-dimensional connectivity, and adaptability of biological neural systems. An added advantage of ENSS over a natural neural system is its ability to modify its core genetic code in response to environmental changes as reflected in needs and requirements. The neural system is fully adaptive and evolvable and is trainable before release. It continues to rewire itself while on the job. The NBF is a unique, bilevel intelligence neural system composed of a higher-level heuristic neural system (HNS) and a lower-level, autonomic neural system (ANS). Taken together, the HNS and the ANS give each NBF the complete capabilities of a biological neural system to match sensory inputs to actions. Another feature of the NBF is the Evolvable Neural Interface (ENI), which links the HNS and ANS. The ENI solves the interface problem between these two systems by actively adapting and evolving from a primitive initial state (a Neural Thread) to a complicated, operational ENI and successfully adapting to a training sequence of sensory input. This simulates the adaptation of a biological neural system in a developmental phase. Within the greater multi-NBF and multi-node ENSS, self-similar ENI s provide the basis for inter-NBF and inter-node connectivity.

  7. Software Based Supernova Recognition

    Science.gov (United States)

    Walters, Stephen M.

    2014-05-01

    This paper describes software for detecting Supernova (SN) in images. The software can operate in real-time to discover SN while data is being collected so the instrumentation can immediately be re-tasked to perform spectroscopy or photometry of a discovery. Because the instrumentation captures two images per minute, the realtime budget is constrained to 30 seconds per target, a challenging goal. Using a set of two to four images, the program creates a "Reference" (REF) image and a "New" (NEW) image where all images are used in both NEW and REF but any SN survives the combination process only in the NEW image. This process produces good quality images having similar noise characteristics but without artifacts that might be interpreted as SN. The images are then adjusted for seeing and brightness differences using a variant of Tomaney and Crotts method of Point Spread Function (PSF) matching after which REF is subtracted from NEW to produce a Difference (DIF) image. A Classifier is then trained on a grid of artificial SN to estimate the statistical properties of four attributes and used in a process to mask false positives that can be clearly identified as such. Further training to avoid any remaining false positives sets the range, in standard deviations for each attribute, that the Classifier will accept as a valid SN. This training enables the Classifier to discriminate between SN and most subtraction residue. Lastly, the DIF image is scanned and measured by the Classifier to find locations where all four properties fall within their acceptance ranges. If multiple locations are found, the one best conforming to the training estimates is chosen. This location is then declared as a Candidate SN, the instrumentation re-tasked and the operator notified.

  8. Software Reliability through Theorem Proving

    Directory of Open Access Journals (Sweden)

    S.G.K. Murthy

    2009-05-01

    Full Text Available Improving software reliability of mission-critical systems is widely recognised as one of the major challenges. Early detection of errors in software requirements, designs and implementation, need rigorous verification and validation techniques. Several techniques comprising static and dynamic testing approaches are used to improve reliability of mission critical software; however it is hard to balance development time and budget with software reliability. Particularly using dynamic testing techniques, it is hard to ensure software reliability, as exhaustive testing is not possible. On the other hand, formal verification techniques utilise mathematical logic to prove correctness of the software based on given specifications, which in turn improves the reliability of the software. Theorem proving is a powerful formal verification technique that enhances the software reliability for missioncritical aerospace applications. This paper discusses the issues related to software reliability and theorem proving used to enhance software reliability through formal verification technique, based on the experiences with STeP tool, using the conventional and internationally accepted methodologies, models, theorem proving techniques available in the tool without proposing a new model.Defence Science Journal, 2009, 59(3, pp.314-317, DOI:http://dx.doi.org/10.14429/dsj.59.1527

  9. The relationships between software publications and software systems

    Science.gov (United States)

    Hogg, David W.

    2017-01-01

    When we build software systems or software tools for astronomy, we sometimes do and sometimes don't also write and publish standard scientific papers about those software systems. I will discuss the pros and cons of writing such publications. There are impacts of writing such papers immediately (they can affect the design and structure of the software project itself), in the short term (they can promote adoption and legitimize the software), in the medium term (they can provide a platform for all the literature's mechanisms for citation, criticism, and reuse), and in the long term (they can preserve ideas that are embodied in the software, possibly on timescales much longer than the lifetime of any software context). I will argue that as important as pure software contributions are to astronomy—and I am both a preacher and a practitioner—software contributions are even more valuable when they are associated with traditional scientific publications. There are exceptions and complexities of course, which I will discuss.

  10. Analysis and Application of River Surface Line in Hilly Area based on Hec-ras Model

    Directory of Open Access Journals (Sweden)

    Yang Congshan

    2017-01-01

    Full Text Available For example—Cixian Fuyang River Regulation Project. Due to the character that Fuyang River is located in hilly areas of Cixian, we use the Hex-ras software to calculate the status of the river water surface line for the goal of determining the final treatment plan. We maintain the present situation of the river channel design as principle, select the most appropriate pushed water level and roughnessas the basic, and we combine the classification calculation of crossing structures of backwater and the encryption calculation section to get the more accurate result. We compare the water level elevation and the calculation of cross strait, analyze the design parameters, calculate repeated the water line section, analyze the rationality of the design plan, and then finally determine the applicability of Hex-rac software in the large continuous variation of cross section of embankment of river river surface line.

  11. MINIMIZATION OF RETRIEVAL TIME DURING SOFTWARE REUSE ...

    African Journals Online (AJOL)

    eobe

    Software reuse refers to the development of software using. Software ... software development time and overall cost. Retrieval of ... Nigerian Journal of Technology (NIJOTECH). Vol. 34 No. ..... SourceForge, a popular web-based source code.

  12. Software engineering beyond the project

    DEFF Research Database (Denmark)

    Dittrich, Yvonne

    2014-01-01

    Context The main part of software engineering methods, tools and technologies has developed around projects as the central organisational form of software development. A project organisation depends on clear bounds regarding scope, participants, development effort and lead-time. What happens when...... these conditions are not given? The article claims that this is the case for software product specific ecosystems. As software is increasingly developed, adopted and deployed in the form of customisable and configurable products, software engineering as a discipline needs to take on the challenge to support...... of traditional software engineering, but makes perfect sense, considering that the frame of reference for product development is not a project but continuous innovation across the respective ecosystem. The article provides a number of concrete points for further research....

  13. Modular Software-Defined Radio

    Directory of Open Access Journals (Sweden)

    Rhiemeier Arnd-Ragnar

    2005-01-01

    Full Text Available In view of the technical and commercial boundary conditions for software-defined radio (SDR, it is suggestive to reconsider the concept anew from an unconventional point of view. The organizational principles of signal processing (rather than the signal processing algorithms themselves are the main focus of this work on modular software-defined radio. Modularity and flexibility are just two key characteristics of the SDR environment which extend smoothly into the modeling of hardware and software. In particular, the proposed model of signal processing software includes irregular, connected, directed, acyclic graphs with random node weights and random edges. Several approaches for mapping such software to a given hardware are discussed. Taking into account previous findings as well as new results from system simulations presented here, the paper finally concludes with the utility of pipelining as a general design guideline for modular software-defined radio.

  14. SOFTWARE RELIABILITY OF PROFICIENT ENACTMENT

    Directory of Open Access Journals (Sweden)

    B.Anni Princy

    2014-07-01

    Full Text Available A software reliability exemplary projects snags the random process as disillusionments which were the culmination yield of two progressions: emerging faults and initial state values. The predominant classification uses the logistic analysis effort function mounting efficient software on the real time dataset. The detriments of the logistic testing were efficaciously overcome by Pareto distribution. The estimated outline ventures the resolved technique for analyzing the suitable communities and the preeminent of fit for a software reliability progress model. Its constraints are predictable to evaluate the reliability of a software system. The future process will permit for software reliability estimations that can be used both as prominence Indicator, but also for planning and controlling resources, the development times based on the onslaught assignments of the efficient computing and reliable measurement of a software system was competent.

  15. Embedded software verification and debugging

    CERN Document Server

    Winterholer, Markus

    2017-01-01

    This book provides comprehensive coverage of verification and debugging techniques for embedded software, which is frequently used in safety critical applications (e.g., automotive), where failures are unacceptable. Since the verification of complex systems needs to encompass the verification of both hardware and embedded software modules, this book focuses on verification and debugging approaches for embedded software with hardware dependencies. Coverage includes the entire flow of design, verification and debugging of embedded software and all key approaches to debugging, dynamic, static, and hybrid verification. This book discusses the current, industrial embedded software verification flow, as well as emerging trends with focus on formal and hybrid verification and debugging approaches. Includes in a single source the entire flow of design, verification and debugging of embedded software; Addresses the main techniques that are currently being used in the industry for assuring the quality of embedded softw...

  16. Recommendation systems in software engineering

    CERN Document Server

    Robillard, Martin P; Walker, Robert J; Zimmermann, Thomas

    2014-01-01

    With the growth of public and private data stores and the emergence of off-the-shelf data-mining technology, recommendation systems have emerged that specifically address the unique challenges of navigating and interpreting software engineering data.This book collects, structures and formalizes knowledge on recommendation systems in software engineering. It adopts a pragmatic approach with an explicit focus on system design, implementation, and evaluation. The book is divided into three parts: "Part I - Techniques" introduces basics for building recommenders in software engineering, including techniques for collecting and processing software engineering data, but also for presenting recommendations to users as part of their workflow.?"Part II - Evaluation" summarizes methods and experimental designs for evaluating recommendations in software engineering.?"Part III - Applications" describes needs, issues and solution concepts involved in entire recommendation systems for specific software engineering tasks, fo...

  17. Software Development Cost Estimation Methods

    Directory of Open Access Journals (Sweden)

    Bogdan Stepien

    2003-01-01

    Full Text Available Early estimation of project size and completion time is essential for successful project planning and tracking. Multiple methods have been proposed to estimate software size and cost parameters. Suitability of the estimation methods depends on many factors like software application domain, product complexity, availability of historical data, team expertise etc. Most common and widely used estimation techniques are described and analyzed. Current research trends in software estimation cost are also presented.

  18. UTM TCL2 Software Requirements

    Science.gov (United States)

    Smith, Irene S.; Rios, Joseph L.; McGuirk, Patrick O.; Mulfinger, Daniel G.; Venkatesan, Priya; Smith, David R.; Baskaran, Vijayakumar; Wang, Leo

    2017-01-01

    The Unmanned Aircraft Systems (UAS) Traffic Management (UTM) Technical Capability Level (TCL) 2 software implements the UTM TCL 2 software requirements described herein. These software requirements are linked to the higher level UTM TCL 2 System Requirements. Each successive TCL implements additional UTM functionality, enabling additional use cases. TCL 2 demonstrated how to enable expanded multiple operations by implementing automation for beyond visual line-of-sight, tracking operations, and operations flying over sparsely populated areas.

  19. Software package requirements and procurement

    OpenAIRE

    1996-01-01

    This paper outlines the problems of specifying requirements and deploying these requirements in the procurement of software packages. Despite the fact that software construction de novo is the exception rather than the rule, little or no support for the task of formulating requirements to support assessment and selection among existing software packages has been developed. We analyse the problems arising in this process and review related work. We outline the key components of a programme of ...

  20. Understanding Software Development Team Performance

    OpenAIRE

    G.P. SUDHAKAR

    2010-01-01

    This paper gives the popular definitions of team, essential characteristics of teams and team de-velopment stages. It discusses the previous empirical studies undertaken to investigate the software development team performance. The factors affecting the software development team performance have been explained. It reviews the past research done in finding the performance of software devel-opment teams. It also discusses some of the representative research done on team performance in non-softw...