WorldWideScience

Sample records for platinum-group metals annual

  1. Development of radioactive platinum group metal catalysts

    International Nuclear Information System (INIS)

    Chung, H.S.; Kim, Y.S.; Kim, Y.E.

    1999-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metals such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solutions was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400m 2 /g. The content of palladium impregnated on the support was 1 to 10 wt. %. Hydrogen isotope exchange efficiency of more than 93% to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its activity is unimportant as in nuclear industries. (author). 86 refs., 44 tabs., 88 figs

  2. Development of radioactive platinum group metal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.S.; Kim, Y.S.; Kim, Y.E. [and others

    1999-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metals such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solutions was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400m{sup 2}/g.The content of palladium impregnated on the support was 1 to 10 wt. %. Hydrogen isotope exchange efficiency of more than 93% to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its activity is unimportant as in nuclear industries. (author). 86 refs., 44 tabs., 88 figs.

  3. Bioaccumulation of platinum group metals in dolphins, Stenella sp ...

    African Journals Online (AJOL)

    Platinum group metals (PGMs) concentrations were measured in the tissues= of dolphins (Stenella sp.) caught along the Ghanaian coastline. Tissues from specimens caught by fishermen from Dixcove, western Ghana, were analysed in 2006 for palladium (Pd), platinum (Pt) and rhodium (Rh) using the Neutron Activation ...

  4. Recycling of platinum group metals from the automotive catalysts

    International Nuclear Information System (INIS)

    Benevit, Mariana; Petter, Patricia Melo Halmenschlager; Veit, Hugo Marcelo

    2014-01-01

    Currently it is very important to use alternative sources of raw material for obtaining metals, avoiding the traditional mining. This work aims to characterize and evaluate the recoverability of platinum group metals present in automotive catalysts. Thus, the catalysts were divided into two groups: the first was catalysts used in 1.0 cars and the second was catalyst used in 2.0 cars. DRX and FRX techniques and chemical analysis performed by ICP/OES was used to characterized these materials. The results showed that there is a significant amount of platinum group elements in catalyst waste, which can be separated and reused. In the next step, hydro and pyrometallurgical routes, for metals extraction from catalyst waste, will be studied. (author)

  5. Effect of Platinum Group Metal Doping in Magnesium Diboride Wires

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Alexiou, Aikaterini; Namazkar, Shahla

    2016-01-01

    The effect of some platinum group metals(PGM = Rh, Pd, and Pt) on the microstructure and critical current density of Cu/Nb-sheathed MgB2 wires has been studied using Mg1-x PGMxB2 powders with low doping levels. It was found that Pt and Pd do not enter the MgB2 lattice and have only limited influe...

  6. Platinum group metal nitrides and carbides: synthesis, properties and simulation

    International Nuclear Information System (INIS)

    Ivanovskii, Alexander L

    2009-01-01

    Experimental and theoretical data on new compounds, nitrides and carbides of the platinum group 4d and 5d metals (ruthenium, rhodium, palladium, osmium, iridium, platinum), published over the past five years are summarized. The extreme mechanical properties of platinoid nitrides and carbides, i.e., their high strength and low compressibility, are noted. The prospects of further studies and the scope of application of these compounds are discussed.

  7. Recent strikes in South Africa’s platinum-group metal mines: effects upon world platinum-group metal supplies

    Science.gov (United States)

    Yager, Thomas R.; Soto-Viruet, Yadira; Barry, James J.

    2012-01-01

    The recent labor disputes over wages and working conditions that have affected South Africa’s three leading platinum-group metal (PGM) producers have affected an industry already plagued by market pressures and labor unrest and raised the specter of constraints in the world’s supply of these metals. Although low demand for these metals in 2011 and 2012 helped to offset production losses of recent years, and particularly those losses caused by the strikes in 2012, a prolonged resumption of strikes could cause severe shortages of iridium, platinum, rhodium, ruthenium, and, to a lesser extent, palladium.

  8. Platinum group metal recovery and catalyst manufacturing process

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H. S.; Kim, Y. S.; Yoo, J. H.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Lee, S. H.; Paek, S. W.; Kang, H. S.

    1998-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metal such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solution was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400 m{sup 2}/g. The content of palladium impregnated on the support was 10 wt.%. Hydrogen isotope exchange efficiency of 93 % to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its actively is unimportant as in nuclear industries. (author). 63 refs., 38 tabs., 36 figs.

  9. Platinum-group elements and gold in base metal sulfides, platinum-group minerals, and Re-Os isotope compositions of the Uitkomst complex, South Africa

    Czech Academy of Sciences Publication Activity Database

    Trubač, Jakub; Ackerman, Lukáš; Gauert, Ch.; Ďurišová, Jana; Hrstka, Tomáš

    2018-01-01

    Roč. 113, č. 2 (2018), s. 439-461 ISSN 0361-0128 R&D Projects: GA ČR GA13-15390S Institutional support: RVO:67985831 Keywords : binary alloys * copper compounds * economic geology * gold * iridium * isotopes * ore deposits * osmium * palladium * platinum * platinum metals * pyrites * Rhenium * rhenium alloys * ruthenium * solid solutions * sulfur compounds * crustal materials * mass-balance calculations * massive sulfides * mineralized zone * monosulfide solid solutions * platinum group elements * platinum group elements (PGEs) * platinum group minerals Subject RIV: DB - Geology ; Mineralogy; AC - Archeology, Anthropology, Ethnology (ARUB-Q) OBOR OECD: Geology; Archaeology (ARUB-Q) Impact factor: 2.519, year: 2016

  10. Investigations of radiochemical methods for the platinum group metals for NAA

    International Nuclear Information System (INIS)

    Tredoux, M.

    A radiochemical procedure for the determination of the platinum group metals and gold is outlined in this report. The sample is irradiated, treated with acids and passed through anion-exchange columns before being determined by gamma spectrometry

  11. Teaching - methodical and research center of hydrogen power engineering and platinum group metals in the former Soviet Union countries

    International Nuclear Information System (INIS)

    Evdokimov, A.A; Sigov, A.S; Shinkarenko, V.V.

    2005-01-01

    Full text: Teaching - Methodical and Research Center (TMRC) 'Sokolinaja Gora' is founded in order to provide methodical-information and scientific support of institutes of higher education in the field of hydrogen power engineering and platinum group metals in Russia and in the countries of the Former Soviet union. It is independent association of creative communities of scientist of higher educational specialists. The main directions of the Center activity are: 1. Teaching-methodological support and development of teaching in the field of hydrogen power engineering and platinum group metals in Russia in the countries of the Former Soviet Union. Themes of teaching includes the basic of safe using of hydrogen technologies and devices, ecological, economic and law aspects of new hydrogen power engineering, transition to which in 21 century is one of the central problems of mankind survival; 2. Organizing of joint researches by independent creative communities of scientists in the field of hydrogen power engineering and platinum group metal; 3. Independent scientific examination, which is made by Advisory Committee of High Technologies consisting of representatives of the countries of Former Soviet Union, which are standing participants of an Annual International Symposia 'Hydrogen Power Engineering and Platinum Group Metals in the Former Soviet Union Countries'. Structure of the Center: 1. Center of strategic development in the field of high technologies; 2. Scientific Research Institute of Hydrogen Power Engineering and Platinum Group Metals; 3. Teaching-Methodical Association in specialization 'Hydrogen Power Engineering and economics' and hydrogen wide spread training; 4. Media Center 'Hydrogen Power Engineering and Platinum Group Metals', 5. Organizational Center; 6. Administrative Center. The Center will be established step-by-step in 2005-2010 on the basis of the following programs: Teaching-methodological program. On the basis of this program it is planned to

  12. Activation analysis for platinum in gold and metals of the platinum group through 199Au

    International Nuclear Information System (INIS)

    Foerster, H.

    1976-01-01

    Platinum was determined in gold and in metals of the platinum group through 199 Au by activation analysis. The matrix was separated at the end of irradiation before the daughter nuclide was formed. Gold was separated by extraction with MIBK from 1

  13. Platinum-group metals from nuclear reactions as a possible resource

    International Nuclear Information System (INIS)

    Jensen, G.A.

    1985-03-01

    Spent nuclear fuels contain significant quantities of three of the platinum-group metals (ruthenium, rhodium, and palladium), and a related element technetium, which is nearly absent in nature. Applications for ruthenium, rhodium, and palladium are well established. Since the supply of these and other platinum metals is largely from foreign sources, they are considered strategic materials. Existing and future spent nuclear fuels contain quantities of these platinum metals that exceed the United States reserve base. Technetium has properties similar to platinum metals and has unique, useful properties of its own. The technical feasibility of recovering and using fission product platinum metals (and technetium) extensively in industry depends on: thoroughly decontaminating platinum-group metals from all other radioactive materials in the waste stream; separating platinum-group metals from one another in very high purity; using applications where appropriate control of the residual radioactivity is possible; and whether or not the United States will recover or process spent fuel prior to repository storage. If the radioactivity must be removed, isotope separation or long term storage to allow decay of the contained radioisotopes may be possible. 7 figs., 7 tabs

  14. Peruvian perovskite Between Transition-metal to PGM/PlatinumGroupMetal Catalytic Fusion

    Science.gov (United States)

    Maksoed, Wh-

    2016-11-01

    Strongly correlated electronic materials made of simple building blocks, such as a transition-metal ion in an octahedral oxygen cage forming a perovskite structure- Dagotto & Tokura for examples are the high-temperature superconductivity & the CMR/Colossal Magnetoresistance . Helium-4 denotes from LC Case,ScD: "Catalytic Fusion of Deuterium into Helium-4"- 1998 dealt with gaseous D2- "contacted with a supported metallic catalyst at superatmospheric pressure". The catalyst is a platinum-group metal, at about 0.5% - 1% by weight, on activated C. Accompanies Stephen J Geier, 2010 quotes "transition metal complexes", the Energy thus produced is enormous, and because the deuterium is very cheap in the form of heavy water (less than US 1/g), the fuel cost is very low (seas &Deuteronomy to be eternally preserves. Heartfelt Gratitudes to HE. Mr. Prof. Ir. HANDOJO.

  15. Automated installation for atomic emission determination of gold, silver and platinum group metals

    International Nuclear Information System (INIS)

    Zayakina, S.B.; Anoshin, G.N.; Gerasimov, P.A.; Smirnov, A.V.

    1999-01-01

    An automated installation for the direct atomic emission determination of silver, gold and platinum-group metals (Ru) in geological and geochemical materials with software for automated data acquisition and handling is designed and developed. The installation consists of a DFS-458 diffraction spectrograph, a MAES-10 multichannel analyzer of emission spectra, and a dual-jet plasmatron. A library of spectral lines of almost all elements excited in the dual-jet plasmatron is complied [ru

  16. HIGHLY REFRACTORY CRUCIBLES OF STABILIZED ZIRCONIA FOR INDUCTION MELTING OF THE PLATINUM GROUP METALS, FABRICATED BY VIBROCASTING

    Directory of Open Access Journals (Sweden)

    V. V. Primachenko

    2012-01-01

    Full Text Available As the result of the studies at PJSC « UKRNIIO them. A.S.Berezhnogo» the technology and commercial production of crucibles from stabilized zirconia for the smelting of platinum group metals are develop

  17. HIGHLY REFRACTORY CRUCIBLES OF STABILIZED ZIRCONIA FOR INDUCTION MELTING OF THE PLATINUM GROUP METALS, FABRICATED BY VIBROCASTING

    OpenAIRE

    V. V. Primachenko; V. V. Martynenko; I. G. Szulik; I. A. Kushchenko

    2012-01-01

    As the result of the studies at PJSC « UKRNIIO them. A.S.Berezhnogo» the technology and commercial production of crucibles from stabilized zirconia for the smelting of platinum group metals are develop

  18. Real life experimental determination of platinum group metals content in automotive catalytic converters

    Science.gov (United States)

    Yakoumis, I.; Moschovi, A. M.; Giannopoulou, I.; Panias, D.

    2018-03-01

    The real life experimental protocol for the preparation of spent automobile catalyst samples for elemental analysis is thoroughly described in the following study. Collection, sorting and dismantling, homogenization and sample preparation for X-Ray fluorescence spectroscopy and Atomic Adsorption Spectroscopy combined with Inductive coupled plasma mass spectrometry are discussed in detail for both ceramic and metallic spent catalysts. The concentrations of Platinum Group Metals (PGMs) in spent catalytic converters are presented based on typical consignments of recycled converters (more than 45,000 pieces) from the Greek Market. The conclusions clearly denoted commercial metallic catalytic foil contains higher PGMs loading than ceramic honeycombs. On the other hand, the total PGMs loading in spent ceramic catalytic converters has been found higher than the corresponding value for the metallic ones.

  19. Determination of platinum group metals by ICP-AES in environmental samples after preconcentration

    International Nuclear Information System (INIS)

    Vlasankova, R.; Sommer, L.

    1999-01-01

    Platinum group metal (PGM) may have toxic properties and their presence in the environment represent danger for human health. With the introduction of automobile catalytic converters containing PGM, the emission of these noble metals into atmosphere has increased. Platinum, palladium and rhodium are used in this catalytic converters to decrease toxic emissions of carbon monoxide, unburnt hydrocarbons and nitrogen oxides in vehicles exhaust gases. These catalysts are mobile sources of PGM into the environment. Thus, increased platinum concentrations have been found in various objects of environment because of the massive introduction of such catalytic converters are present. The preconcentration and separation of PGM and their determination by ICP-AES in environmental samples are described

  20. High Performance Platinum Group Metal Free Membrane Electrode Assemblies through Control of Interfacial Processes

    Energy Technology Data Exchange (ETDEWEB)

    Ayers, Katherine [Proton Energy Systems, Wallingford, CT (United States); Capuano, Christopher [Proton Energy Systems, Wallingford, CT (United States); Atanassov, Plamen [Univ. of New Mexico, Albuquerque, NM (United States); Mukerjee, Sanjeev [Northeastern Univ., Boston, MA (United States); Hickner, Michael [Pennsylvania State Univ., University Park, PA (United States)

    2017-11-29

    The quantitative goal of this project was to produce a high-performance anion exchange membrane water electrolyzer (AEM-WE) completely free of platinum group metals (PGMs), which could operate for at least 500 hours with less than 50 microV/hour degradation, at 500 mA/cm2. To achieve this goal, work focused on the optimization of electrocatalyst conductivity, with dispersion and utilization in the membrane electrode assembly (MEA) improved through refinement of deposition techniques. Critical factors were also explored with significant work undertaken by Northeastern University to further understand catalyst-membrane-ionomer interfaces and how they differ from liquid electrolyte. Water management and optimal cell operational parameters were established through the design, fabrication, and test of a new test station at Proton specific for AEM evaluation. Additionally, AEM material stability and robustness at high potentials and gas evolution conditions were advanced at Penn State.

  1. Removal of platinum group metals contained in molten glass using copper

    International Nuclear Information System (INIS)

    Uruga, Kazuyoshi; Sawada, Kayo; Arita, Yuji; Enokida, Youichi; Yamamoto, Ichiro

    2007-01-01

    Removal of platinum group metals (PGMs) such as Pd, Ru, and RuO 2 from molten glass by using various amounts of liquid Cu was done as a basic study on a new vitrification process for a high-level radio-active waste. We prepared two types of borosilicate glasses containing PGMs and Cu, respectively. These glasses were mixed together and heated at 1,473 K for 4h in Ar atmosphere. More than 95% of Pd were removed as a spherical metal button composed of Pd-Cu alloy when Cu was added in an amount 0.5 times the weight of Pd. Nearly 95% of Ru was also removed as a spherical button with 2.5-5 times as much Cu addition as Ru in weight. Ruthenium oxide was reduced to metallic Ru by a reaction with Cu in the molten glass. The removal fraction was increased by increasing the amount of Cu and reached 63% when Cu addition was 7.5 times as much as RuO 2 in weight. By addition of Si as a reducing agent, nearly 90% of Pd and Ru were removed with Cu and Si metal composites even under O 2 :Ar=20:80 (v/v) condition. (author)

  2. Influence of platinum group metal-free catalyst synthesis on microbial fuel cell performance

    Science.gov (United States)

    Santoro, Carlo; Rojas-Carbonell, Santiago; Awais, Roxanne; Gokhale, Rohan; Kodali, Mounika; Serov, Alexey; Artyushkova, Kateryna; Atanassov, Plamen

    2018-01-01

    Platinum group metal-free (PGM-free) ORR catalysts from the Fe-N-C family were synthesized using sacrificial support method (SSM) technique. Six experimental steps were used during the synthesis: 1) mixing the precursor, the metal salt, and the silica template; 2) first pyrolysis in hydrogen rich atmosphere; 3) ball milling; 4) etching the silica template using harsh acids environment; 5) the second pyrolysis in ammonia rich atmosphere; 6) final ball milling. Three independent batches were fabricated following the same procedure. The effect of each synthetic parameters on the surface chemistry and the electrocatalytic performance in neutral media was studied. Rotating ring disk electrode (RRDE) experiment showed an increase in half wave potential and limiting current after the pyrolysis steps. The additional improvement was observed after etching and performing the second pyrolysis. A similar trend was seen in microbial fuel cells (MFCs), in which the power output increased from 167 ± 2 μW cm-2 to 214 ± 5 μW cm-2. X-ray Photoelectron Spectroscopy (XPS) was used to evaluate surface chemistry of catalysts obtained after each synthetic step. The changes in chemical composition were directly correlated with the improvements in performance. We report outstanding reproducibility in both composition and performance among the three different batches.

  3. Enhanced Dissolution of Platinum Group Metals Using Electroless Iron Deposition Pretreatment

    Science.gov (United States)

    Taninouchi, Yu-ki; Okabe, Toru H.

    2017-12-01

    In order to develop a new method for efficiently recovering platinum group metals (PGMs) from catalyst scraps, the authors investigated an efficient dissolution process where the material was pretreated by electroless Fe deposition. When Rh-loaded alumina powder was kept in aqua regia at 313 K (40 °C) for 30 to 60 minutes, the Rh hardly dissolved. Meanwhile, after electroless Fe plating using a bath containing sodium borohydride and potassium sodium tartrate as the reducing and complexing agents, respectively, approximately 60 pct of Rh was extracted by aqua regia at 313 K (40 °C) after 30 minutes. Furthermore, when heat treatment was performed at 1200 K (927 °C) for 60 minutes in vacuum after electroless plating, the extraction of Rh approached 100 pct for the same leaching conditions. The authors also confirmed that the Fe deposition pretreatment enhanced the dissolution of Pt and Pd. These results indicate that an effective and environmentally friendly process for the separation and extraction of PGMs from catalyst scraps can be developed utilizing this Fe deposition pretreatment.

  4. Activity targets for nanostructured platinum-group-metal-free catalysts in hydroxide exchange membrane fuel cells

    Science.gov (United States)

    Setzler, Brian P.; Zhuang, Zhongbin; Wittkopf, Jarrid A.; Yan, Yushan

    2016-12-01

    Fuel cells are the zero-emission automotive power source that best preserves the advantages of gasoline automobiles: low upfront cost, long driving range and fast refuelling. To make fuel-cell cars a reality, the US Department of Energy has set a fuel cell system cost target of US$30 kW-1 in the long-term, which equates to US$2,400 per vehicle, excluding several major powertrain components (in comparison, a basic, but complete, internal combustion engine system costs approximately US$3,000). To date, most research for automotive applications has focused on proton exchange membrane fuel cells (PEMFCs), because these systems have demonstrated the highest power density. Recently, however, an alternative technology, hydroxide exchange membrane fuel cells (HEMFCs), has gained significant attention, because of the possibility to use stable platinum-group-metal-free catalysts, with inherent, long-term cost advantages. In this Perspective, we discuss the cost profile of PEMFCs and the advantages offered by HEMFCs. In particular, we discuss catalyst development needs for HEMFCs and set catalyst activity targets to achieve performance parity with state-of-the-art automotive PEMFCs. Meeting these targets requires careful optimization of nanostructures to pack high surface areas into a small volume, while maintaining high area-specific activity and favourable pore-transport properties.

  5. Chemical reactions on platinum-group metal surfaces studied by synchrotron-radiation-based spectroscopy

    International Nuclear Information System (INIS)

    Kondoh, Hiroshi; Nakai, Ikuyo; Nagasaka, Masanari; Amemiya, Kenta; Ohta, Toshiaki

    2009-01-01

    A new version of synchrotron-radiation-based x-ray spectroscopy, wave-length-dispersive near-edge x-ray absorption fine structure (dispersive-NEXAFS), and fast x-ray photoelectron spectroscopy have been applied to mechanistic studies on several surface catalytic reactions on platinum-group-metal surfaces. In this review, our approach using above techniques to understand the reaction mechanism and actual application studies on three well-known catalytic surface reactions, CO oxidation on Pt(111) and Pd(111), NO reduction on Rh(111), and H 2 O formation on Pt(111), are introduced. Spectroscopic monitoring of the progress of the surface reactions enabled us to detect reaction intermediates and analyze the reaction kinetics quantitatively which provides information on reaction order, rate constant, pre-exponential factor, activation energy and etc. Such quantitative analyses combined with scanning tunneling microscopy and kinetic Monte Carlo simulations revealed significant contribution of the adsorbate configurations and their dynamic changes to the reaction mechanisms of the above fundamental catalytic surface reactions. (author)

  6. Recovery of Platinum Group Metals from Spent Catalysts Using Iron Chloride Vapor Treatment

    Science.gov (United States)

    Taninouchi, Yu-ki; Okabe, Toru H.

    2018-05-01

    The recovery of platinum group metals (PGMs) from spent automobile catalysts is a difficult process because of their relatively low contents in the scrap. In this study, to improve the efficiency of the existing recycling techniques, a novel physical concentration method involving treatment with FeCl2 vapor has been examined. The reactions occurring between typical catalyst components and FeCl2 vapor are discussed from the thermodynamic point of view, and the validity of the proposed technique was experimentally verified. The obtained results indicate that the vapor treatment at around 1200 K (927 °C) can effectively alloy PGMs (Pt, Pd, and Rh) with Fe, resulting in the formation of a ferromagnetic alloy. It was also confirmed that cordierite and alumina (the major catalyst components) remained unreacted after the vapor treatment, while ceria species were converted into oxychlorides. The samples simulating the automobile catalyst were also subjected to magnetic separation after the treatment with FeCl2 vapor; as a result, PGMs were successfully extracted and concentrated in the form of a magnetic powder. Thus, the FeCl2 vapor treatment followed by magnetic separation can be utilized for recovering PGMs directly from spent catalysts as an effective pretreatment for the currently used recycling methods.

  7. Recycling of platinum group metals from the automotive catalysts; Reciclagem de metais do grupo da platina proveniente de catalisadores automotivos

    Energy Technology Data Exchange (ETDEWEB)

    Benevit, Mariana; Petter, Patricia Melo Halmenschlager; Veit, Hugo Marcelo, E-mail: patymhp@yahoo.com.br [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Faculdade de Engenharia. Departamento de Materiais

    2014-07-01

    Currently it is very important to use alternative sources of raw material for obtaining metals, avoiding the traditional mining. This work aims to characterize and evaluate the recoverability of platinum group metals present in automotive catalysts. Thus, the catalysts were divided into two groups: the first was catalysts used in 1.0 cars and the second was catalyst used in 2.0 cars. DRX and FRX techniques and chemical analysis performed by ICP/OES was used to characterized these materials. The results showed that there is a significant amount of platinum group elements in catalyst waste, which can be separated and reused. In the next step, hydro and pyrometallurgical routes, for metals extraction from catalyst waste, will be studied. (author)

  8. Global exploration and production capacity for platinum-group metals from 1995 through 2015

    Science.gov (United States)

    Wilburn, David R.

    2012-01-01

    Platinum-group metals (PGMs) are required in a variety of commercial, industrial, and military applications for many existing and emerging technologies, yet the United States is highly dependent on foreign sources of PGMs. Information on global exploration for PGMs since 1995 has been used in this study as a basis for identifying locations where the industry has determined that exploration has provided data sufficient to warrant development of a new mine or expansion of an existing operation or where a significant increase in capacity for PGMs is anticipated by 2015. Discussions include an overview of the industry and the selected sites, factors affecting mineral supply, and circumstances leading to the development of mineral properties with the potential to affect mineral supply. Of the 52 sites or regional operations that were considered in this analysis, 16 sites were producing before 1995, 28 sites commenced production from 1995 through 2010, and 8 sites were expected to begin production from 2011 through 2015 if development plans came to fruition. The United States imports PGMs primarily from Canada, Russia, South Africa, and Zimbabwe to meet increasing demand for these materials in a variety of specialized and high-tech applications. Feed sources of PGMs are changing in South Africa and Russia, which together accounted for about 89 percent of platinum production and 82 percent of palladium production in 2009. A greater amount of South African PGM capacity is likely to come from deeper, higher cost Upper Group Reef seam 2 deposits and deposits in the Eastern Bushveld area. Future Russian PGM capacity is likely to come from ore zones with generally lower PGM content and different platinum-to-palladium ratios than the nickel-rich ore that dominated PGM supply in the 1990s. Because PGM supply from Canada and Russia is derived as a byproduct of copper and nickel mining, the PGM supply from these countries is influenced by economic, environmental, political, and

  9. Uptake of traffic-related heavy metals and platinum group elements (PGE) by plants

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, J.; Hannker, D.; Eckhardt, J.D.; Stueben, D. [Institute of Petrography and Geochemistry, University of Karlsruhe, Karlsruhe (Germany)

    1998-04-23

    The distribution of the platinum group elements (PGE) caused by traffic emissions from autoexhaust catalysts has been determined in soils and different types of plants. The plants (spinach, cress, phacelia, stinging nettle) were cultivated on different soils collected from areas adjacent to a German highway and on uncontaminated sandy and clayey soils. The main result of the experiments was a measurable transfer of PGE from contaminated soil to plants. Following the definition of Sauerbeck (Beurteilung von Schwermetallkontaminationen im Boden. Frankfurt/Main: Dechema-Fachgespraeche, 1989:281-316), Pt, Rh and Pd transfer coefficients are within the range of immobile to moderately mobile elements, such as Cu. The transfer coefficient decreases from Pd>Pt{>=}Rh. Palladium therefore is the most biologically available of this element group

  10. Thermochemical Properties of Group IVB and VB Transition Metal Alloys with Platinum Group Metals: Acid - Stabilization.

    Science.gov (United States)

    Cima, Michael John

    Solid-state galvanic cell measurements and oxide equilibration experiments are used to derive thermochemical quantities for a variety of acid-base stabilized alloys such as Nb-Pd, Nb-Rh, Ti-Pd, and Ti-Rh. The experiments have effectively resulted in the titration of palladium by niobium metal. The excess partial molar Gibbs energy of niobium at infinite dilution was determined to be -62 kcal/mole at 1000^circ C and the Gibbs energy of formation of {rm NbPd}_{3.55} is -42 kcal/mole. These results and those for the other systems are used to assess the importance of crystal field effects in the context of the generalized Lewis acid-base theory.

  11. First determination of the levels of platinum group metals in Manta birostris (manta ray) caught along the Ghanaian coastline.

    Science.gov (United States)

    Essumang, D K

    2010-06-01

    Tissues from Manta birostris caught by fishermen from Dixcove in the western part of Ghana were analyzed for their Platinum, palladium and rhodium concentrations (PGM). The use of chondrichthyan fish has permitted the study of trace levels of Platinum group metals (PGMs) which have travelled very far into the sea. The analysis showed that Ghana's coastline is fairly polluted with these platinum group metals (PGMs). PGM concentration in manta ray recorded a range of (0.15-0.85) microg/g for Pt, (0.033-0.67) microg/g for Pd and (0.007-0.145) microg/g for Rh. Comparing these values to the UK dietary intake of 0.2 microg/day for Pt and Rh and 1.0 microg/day for Pd, its indicates that the values obtained from the analysis for Pt was above the required level. This is the first study to show the accumulation of PGM in chondrichthyan fish, although the sources of this pollution are not clear as manta birostris is migratory and therefore need to be investigated further. The presence of the PGM is very significant, since manta ray meat is consumed in Ghana. This may presents a health risk, due to a possible accumulation of PGMs in humans.

  12. Contamination from gold and platinum-group metals mining in the Gulf of Darién, Colombia

    Science.gov (United States)

    Vasquez-Bedoya, L.; Palacio Baena, J.

    2013-12-01

    Gulf of Darién, triangular southernmost extension of the Caribbean Sea, bounded by Panama on the southwest and by Colombia on the southeast and east. The Gulf is made up of 17 municipalities in the department of Choco and Antioquia. The Gulf of Darién is a geostrategic region, rich in biodiversity, known for its natural resources of minerals, oil, lumber as well as its water and fertile land. The Darién also acts as the bridge between South America and Central America and has access to the Pacific Ocean and the Caribbean Sea. The economy in the region is based mainly on agribusinesses, tourism and mining activities, mainly the 'mining of gold and platinum-group metals'. In our study we determined the degree of trace element contamination in estuarine sediment samples originated from mining activities and municipal waste water discharges of effluents on the gulf of Darién. . Surface samples were taken from 17 locations through the entire Gulf. Grain size, Corg, Ag, Al, Ca , Cr, Cu, Fe, Mg, Mn, Na, Ni, Pb and Zn concentrations were analyzed, and enrichment factors (EF) as well as geo-accumulation indices (Igeo) were calculated. Concentrations of Pb, Zn, Ni, Cu and Cr show levels that are consistent with those typically found in urbanized marine environments. EF and Igeo values revealed that the Gulf is extremely contaminated with Ag and moderately contaminated with Cr and Zn. The sources of Cr, Ag, Hg and Zn are associated with the development of mining activities in the Atrato River basin. The observed enrichment of Ag may be explained as a residue of the extraction of gold and platinum-group metals.

  13. Lipid solubility of the platinum group metals Pt, Pd and Rh in dependence on the presence of complexing agents

    International Nuclear Information System (INIS)

    Zimmermann, Sonja; Menzel, Christoph M.; Stueben, Doris; Taraschewski, Horst; Sures, Bernd

    2003-01-01

    All complexing agents had a significant influence on octanol solubility of PGM. - Investigations on the bioaccumulation of the platinum group metals (PGM) Pt, Pd and Rh in aquatic organisms are of growing interest in environmental research due to the increasing emission of these metals by motor vehicles with catalytic converters. Until now, nothing is known about the possible influence of complexing agents on the bioaccumulation capacity of these precious metals. According to the partition coefficient between 1-octanol and water (P OW ) as a measure of bioaccumulation, in this study a simple shaking method was performed in order to investigate the effects of different complexing agents (L-methionine, thio urea, EDTA, humic substances, bile compounds) on the octanol solubility of the PGM. The results demonstrated a significant influence of all agents used. L-Methionine and thio urea decreased the lipid solubility. In contrast, the presence of EDTA, humic substances and especially bile caused a higher transfer of metals in the octanol phase. For most complexing agents tested, the transfer of Pd to the lipid phase was significantly higher compared with Rh and Pt, except for bile acid where the highest octanol solubility was found for Pt. Recent experimental results on PGM accumulation in zebra mussels confirm a high bioaccumulation of Pd which could be predicted from the lipid solubility

  14. Lipid solubility of the platinum group metals Pt, Pd and Rh in dependence on the presence of complexing agents

    Energy Technology Data Exchange (ETDEWEB)

    Zimmermann, Sonja; Menzel, Christoph M.; Stueben, Doris; Taraschewski, Horst; Sures, Bernd

    2003-07-01

    All complexing agents had a significant influence on octanol solubility of PGM. - Investigations on the bioaccumulation of the platinum group metals (PGM) Pt, Pd and Rh in aquatic organisms are of growing interest in environmental research due to the increasing emission of these metals by motor vehicles with catalytic converters. Until now, nothing is known about the possible influence of complexing agents on the bioaccumulation capacity of these precious metals. According to the partition coefficient between 1-octanol and water (P{sub OW}) as a measure of bioaccumulation, in this study a simple shaking method was performed in order to investigate the effects of different complexing agents (L-methionine, thio urea, EDTA, humic substances, bile compounds) on the octanol solubility of the PGM. The results demonstrated a significant influence of all agents used. L-Methionine and thio urea decreased the lipid solubility. In contrast, the presence of EDTA, humic substances and especially bile caused a higher transfer of metals in the octanol phase. For most complexing agents tested, the transfer of Pd to the lipid phase was significantly higher compared with Rh and Pt, except for bile acid where the highest octanol solubility was found for Pt. Recent experimental results on PGM accumulation in zebra mussels confirm a high bioaccumulation of Pd which could be predicted from the lipid solubility.

  15. η5 and η6 - cyclic π-perimeter hydrocarbon platinum group metal ...

    Indian Academy of Sciences (India)

    The SMART20 software was used for data acquisition. ... were undertaken with the SAINT20 software. Structures ..... the change in electron density around the metal centre. .... request@ccdc.cam.ac.uk, or by contacting The Cambridge.

  16. Metals in environmental media: A study of trace and platinum group ...

    African Journals Online (AJOL)

    A detailed study has been conducted to determine the contamination of Thohoyandou roadside soils, vegetation, sewage and river waters by Zn, Cu, Cr, Pb, Cd, Fe, Pt and Pd. The study further investigated the correlation between these trace metals in roadside soils and vegetation in order to infer the potential impacts of ...

  17. Determination of platinum group metal catalyst residues in active pharmaceutical ingredients by means of total reflection X-ray spectrometry

    International Nuclear Information System (INIS)

    Marguí, Eva; Queralt, Ignasi; Hidalgo, Manuela

    2013-01-01

    The control of metal catalyst residues (i.e., platinum group metals (PGMs)) in different stages of the manufacturing processes of the active pharmaceutical ingredients (APIs) and, especially, in the final product is crucial. For API specimens, there are strict guidelines to limit the levels of metal residues based on their individual levels of safety concern. For PGMs the concentration limit has been established at 10 mg/kg in the API. Therefore great effort is currently being devoted to the development of new and simple procedures to control metals in pharmaceuticals. In the present work, an analytical methodology based on benchtop total reflection X-ray fluorescence spectrometry (TXRF) has been developed for the rapid and simple determination of some PGM catalyst impurities (Rh, Pd, Ir and Pt) in different types of API samples. An evaluation of different sample treatments (dissolution and digestion of the solid pharmaceutical samples) has been carried out and the developed methodologies have been validated according to the analytical parameters to be considered and acceptance criteria for PGM determination according to the United States Pharmacopeia (USP). Limits of quantification obtained for PGM metals were in the range of 2–4 mg/kg which are satisfactory according to current legislation. From the obtained results it is shown that the developed TXRF method can be implemented in the pharmaceutical industries to increase productivity of the laboratory; offering an interesting and complementary analytical tool to other atomic spectroscopic methods. - Highlights: • A TXRF method for PGM catalyst residue determination in API samples is presented. • Analysis can be performed using 10 μL of the internal standardized dissolved API. • The method is rapid, simple and suitable according to the USP requirements

  18. Platinum Group Metal-free Catalysts for Hydrogen Evolution Reaction in Microbial Electrolysis Cells.

    Science.gov (United States)

    Yuan, Heyang; He, Zhen

    2017-07-01

    Hydrogen gas is a green energy carrier with great environmental benefits. Microbial electrolysis cells (MECs) can convert low-grade organic matter to hydrogen gas with low energy consumption and have gained a growing interest in the past decade. Cathode catalysts for the hydrogen evolution reaction (HER) present a major challenge for the development and future applications of MECs. An ideal cathode catalyst should be catalytically active, simple to synthesize, durable in a complex environment, and cost-effective. A variety of noble-metal free catalysts have been developed and investigated for HER in MECs, including Nickel and its alloys, MoS 2 , carbon-based catalysts and biocatalysts. MECs in turn can serve as a research platform to study the durability of the HER catalysts. This personal account has reviewed, analyzed, and discussed those catalysts with an emphasis on synthesis and modification, system performance and potential for practical applications. It is expected to provide insights into the development of HER catalysts towards MEC applications. © 2017 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Platinum-group elements

    Science.gov (United States)

    Zientek, Michael L.; Loferski, Patricia J.; Parks, Heather L.; Schulte, Ruth F.; Seal, Robert R.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    The platinum-group elements (PGEs)—platinum, palladium, rhodium, ruthenium, iridium, and osmium—are metals that have similar physical and chemical properties and tend to occur together in nature. PGEs are indispensable to many industrial applications but are mined in only a few places. The availability and accessibility of PGEs could be disrupted by economic, environmental, political, and social events. The United States net import reliance as a percentage of apparent consumption is about 90 percent.PGEs have many industrial applications. They are used in catalytic converters to reduce carbon monoxide, hydrocarbon, and nitrous oxide emissions in automobile exhaust. The chemical industry requires platinum or platinum-rhodium alloys to manufacture nitric oxide, which is the raw material used to manufacture explosives, fertilizers, and nitric acid. In the petrochemical industry, platinum-supported catalysts are needed to refine crude oil and to produce aromatic compounds and high-octane gasoline. Alloys of PGEs are exceptionally hard and durable, making them the best known coating for industrial crucibles used in the manufacture of chemicals and synthetic materials. PGEs are used by the glass manufacturing industry in the production of fiberglass and flat-panel and liquid crystal displays. In the electronics industry, PGEs are used in computer hard disks, hybridized integrated circuits, and multilayer ceramic capacitors.Aside from their industrial applications, PGEs are used in such other fields as health, consumer goods, and finance. Platinum, for example, is used in medical implants, such as pacemakers, and PGEs are used in cancer-fighting drugs. Platinum alloys are an ideal choice for jewelry because of their white color, strength, and resistance to tarnish. Platinum, palladium, and rhodium in the form of coins and bars are also used as investment commodities, and various financial instruments based on the value of these PGEs are traded on major exchanges

  20. Universal dependence of hydrogen oxidation and evolution reaction activity of platinum-group metals on pH and hydrogen binding energy.

    Science.gov (United States)

    Zheng, Jie; Sheng, Wenchao; Zhuang, Zhongbin; Xu, Bingjun; Yan, Yushan

    2016-03-01

    Understanding how pH affects the activity of hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) is key to developing active, stable, and affordable HOR/HER catalysts for hydroxide exchange membrane fuel cells and electrolyzers. A common linear correlation between hydrogen binding energy (HBE) and pH is observed for four supported platinum-group metal catalysts (Pt/C, Ir/C, Pd/C, and Rh/C) over a broad pH range (0 to 13), suggesting that the pH dependence of HBE is metal-independent. A universal correlation between exchange current density and HBE is also observed on the four metals, indicating that they may share the same elementary steps and rate-determining steps and that the HBE is the dominant descriptor for HOR/HER activities. The onset potential of CO stripping on the four metals decreases with pH, indicating a stronger OH adsorption, which provides evidence against the promoting effect of adsorbed OH on HOR/HER.

  1. Levels of Platinum Group Metals in Selected Species (Sarotherodon melanotheron, Chonophorus lateristriga, Macrobrachium vollenhovenii and Crassostrea tulipa in Some Estuaries and Lagoons Along the Coast of Ghana

    Directory of Open Access Journals (Sweden)

    D. K. Essumang

    2010-01-01

    Full Text Available The use of some biota as bioindicators of heavy metal pollution has been demonstrated as particularly adequate due to their capacity of bioconcentration. This study evaluated the levels of platinum group metals (PGMs in some selected species along the coastal belt of Ghana, using the neutron activation analysis (NAA method. The result was processed to evaluate pollution indices in order to map the distribution of the metals in those species in the lagoons and estuaries along the costal belt of Ghana. The analysis showed significant levels of all PGMs in blackchin tilapia (Sarotherodon melanotheron Cichlidae, brown goby (Chonophorus lateristriga Gobiidae, shrimp (Macrobrachium vollenhovenii Palaemonidae, and mangrove oysters (Crassostrea tulipa Ostreidae in the lagoons and river Pra estuary. However, the oysters showed an elevated mean concentration of 0.13 μ/g (dry weight Pd. From the pollution indices, most of the sampling sites registered mean contamination factor (CF values between 1.20 and 3.00 for Pt, Pd, and Rh. The pollution load index (PLI conducted also gave an average pollution index between 0.79 and 2.37, indicating progressive contamination levels. The results revealed that anthropogenic sources, industrial and hospital effluent, etc., together with vehicular emissions, could be the contributing factors to the deposition of PGMs along the Ghanaian coast.

  2. Competitive platinum-group-metal (PGM) supply from the Eastern Limb, Bushveld Complex: Geological, mining and mineral economic aspects

    CSIR Research Space (South Africa)

    McGill, JE

    2011-08-01

    Full Text Available -GROUP-METAL (PGM) SUPPLY FROM THE EASTERN LIMB, BUSHVELD COMPLEX: GEOLOGICAL, MINING, AND MINERAL ECONOMIC ASPECTS Dr. Jeannette E. McGill & Prof. Murray W. Hitzman ACKNOWLEDGEMENTS ? COUNCIL FOR SCIENTIFIC AND INDUSTRIAL RESEARCH (CSIR) ? Centre for Mining... Innovation ? Office of Graduate Studies, Fogarty Endowment ? Mr. VISHNU PILLAY (EXECUTIVE HEAD: JV?S ? Anglo Platinum) ? ACADEMIC ADVISORS Prof. Murray Hitzman (Economic Geology); Dr. Hugh Miller (Mining Engineering); Prof. Rodderick Eggert (Mineral...

  3. Power generation in microbial fuel cells using platinum group metal-free cathode catalyst: Effect of the catalyst loading on performance and costs.

    Science.gov (United States)

    Santoro, Carlo; Kodali, Mounika; Herrera, Sergio; Serov, Alexey; Ieropoulos, Ioannis; Atanassov, Plamen

    2018-02-28

    Platinum group metal-free (PGM-free) catalyst with different loadings was investigated in air breathing electrodes microbial fuel cells (MFCs). Firstly, the electrocatalytic activity towards oxygen reduction reaction (ORR) of the catalyst was investigated by rotating ring disk electrode (RRDE) setup with different catalyst loadings. The results showed that higher loading led to an increased in the half wave potential and the limiting current and to a further decrease in the peroxide production. The electrons transferred also slightly increased with the catalyst loading up to the value of ≈3.75. This variation probably indicates that the catalyst investigated follow a 2x2e - transfer mechanism. The catalyst was integrated within activated carbon pellet-like air-breathing cathode in eight different loadings varying between 0.1 mgcm -2 and 10 mgcm -2 . Performance were enhanced gradually with the increase in catalyst content. Power densities varied between 90 ± 9 μWcm -2 and 262 ± 4 μWcm -2 with catalyst loading of 0.1 mgcm -2 and 10 mgcm -2 respectively. Cost assessments related to the catalyst performance are presented. An increase in catalyst utilization led to an increase in power generated with a substantial increase in the whole costs. Also a decrease in performance due to cathode/catalyst deterioration over time led to a further increase in the costs.

  4. Probing Interaction Between Platinum Group Metal (PGM) and Non-PGM Support Through Surface Characterization and Device Performance

    Science.gov (United States)

    Saha, Shibely

    High cost and limited abundance of Platinum (Pt) have hindered effective commercialization of Proton Exchange Membrane Fuel Cell and Electrolyzer. Efforts have been undertaken to reduce precious group metal (PGM) requirement for these devices without compromising the activity of the catalyst by using transition metal carbides (TMC) as non-PGM support thanks to their similar electronic and geometric structures as Pt. In this work Mo2C was selected as non-PGM support and Pt was used as the PGM of interest. We hypothesize that the hollow nanotube morphology of Mo2C support combined with Pt nano particles deposited on it via atomic layer deposition (ALD) technique would allow increased interaction between them which may increase the activity of Pt and Mo2C as well as maximize the Pt active surface area. Specifically, a rotary ALD equipment was used to grow Pt particles from atomic level to 2--3 nanometers by simply adjusting number of ALD cycles in order to probe the interaction between the deposited Pt nanoparticles and Mo2C nanotube support. Interaction between the Pt and Mo2 C was analyzed via surface characterization and electrochemical characterization. Interaction between Pt and Mo2C arises due to the lattice mismatch between Pt and Mo2C as well as electron migration between them. Lattice spacing analysis using high resolution transmission electron microscopy (HRTEM) images, combined with Pt binding energy shift in XPS results, clearly showed strong bonding between Pt nanoparticles and the Mo2C nanotube support in all the resultant Pt/Mo2C samples. We postulate that this strong interaction is responsible for the significantly enhanced durability observed in our constant potential electrolysis (CPE) and accelerated degradation testing (ADT). Of the three samples from different ALD cycles (15, 50 and 100), Mo2C nanotubes modified by 50 (1.07 wt% Pt loading) and 100 cycles (4.4 wt% Pt) of Pt deposition, showed higher HER and HOR activity per Pt mass than commercial

  5. Catalytic transformations of fatty acids derivatives for food, oleochemicals and fuels over carbon supported platinum group metals

    Energy Technology Data Exchange (ETDEWEB)

    Simakova, I.

    2010-07-01

    prominent in linoleic acid deoxygenation giving only 3 % conversion of fatty acids in 330 min. The deactivation originated from the formation of C17 aromatic compounds and fatty acid dimers via Diels-Alder reaction. Thus hydrogenation of unsaturated fatty acids can be considered as preliminary chemical modification step in the green diesel production. In this work particular care was taken to strengthen the nano level understanding of the Pd role, in particular metal size effect, in the catalytic hydrogenation and deoxygenation. Pd/C catalysts were synthesized with the same Pd loading and systematically varied metal dispersion via the controllable formation of Pd particles over carbon support surface. The effect of metal dispersion on hydrogenation rate and trans/cis ratio was revealed. An optimum metal dispersion giving the highest decarboxylation reaction rate was observed. In addition to the particle size effect, the impact of mass transfer was elucidated and detail discussions on temperature programmed desorption of CO from the fresh and spent samples was provided. Hydrogenation of vegetable feedstocks was performed in batch and continuous modes, using powdered and granulated Pd/C catalysts correspondingly. One of the main focuses of the work was put on the scale-up of the hydrogenation process. There are several challenges attributed to the scale-up of a chemical process which have to be recognized before progressing to an industrial application. In terms of the high production volumes the logical step is to investigate the performance of hydrogenation as a continuous process. A laboratory study in a continuous fixed bed reactor was performed, giving crucial information about the catalyst long-term stability and catalyst deactivation. Furthermore, the impact of using free fatty acids or triglycerides feedstocks as well as the effect of catalyst particle size and Pd loading were investigated in continuous mode. Finally, the production capacities for different operation

  6. Platinum-group element mineralization

    International Nuclear Information System (INIS)

    Gruenewaldt, G.

    1985-01-01

    The purpose of this investigation is to determine the geological processes responsible for the abnormal enrichment of the platinum-group elements (PGE) in the mineralized layers of the Bushveld Complex. Questions asked are: what processes caused enrichment of the Bushveld magma in the PGE ; by what processes were these PGE concentrated in the mineralized layers ; was contamination of the Bushveld magma from external sources important in the formation of the PGE enriched layers ; what are the effects of fractional crystallization on the PGE ratios

  7. Biological role in the transformation of platinum-group mineral grains

    Science.gov (United States)

    Reith, Frank; Zammit, Carla M.; Shar, Sahar S.; Etschmann, Barbara; Bottrill, Ralph; Southam, Gordon; Ta, Christine; Kilburn, Matthew; Oberthür, Thomas; Ball, Andrew S.; Brugger, Joël

    2016-04-01

    Platinum-group elements are strategically important metals. Finding new deposits is becoming increasingly difficult owing to our limited understanding of the processes that affect their mobility in surface environments. Microorganisms have been shown to promote the mobility of metals around ore deposits. Here we show that microorganisms influence the mobility of platinum-group elements in mineral grains collected from Brazil, Australia and Colombia. Scanning electron microscopy showed biofilms covering the platinum-group mineral grains. The biofilms contained abundant platinum-group element nanoparticles and microcrystalline aggregates, and were dominated by Proteobacteria, many of which were closely related to known metal-resistant species. Some platinum-group mineral grains contained carbon, nitrogen, sulfur, selenium and iodine, suggesting the grains may be biogenic in origin. Molecular analyses show that Brazilian platinum-palladium grains hosted specific bacterial communities, which were different in composition from communities associated with gold grains, or communities in surrounding soils and sediments. Nano-phase metallic platinum accumulated when a metallophillic bacterium was incubated with a percolating platinum-containing medium, suggesting that biofilms can cause the precipitation of mobile platinum complexes. We conclude that biofilms are capable of forming or transforming platinum-group mineral grains, and may play an important role for platinum-group element dispersion and re-concentration in surface environments.

  8. Invited: Tailoring Platinum Group Metals Towards Optimal Activity for Oxygen Electroreduction to H2o and H2O2: From Extended Surfaces to Nanoparticles

    DEFF Research Database (Denmark)

    Stephens, Ifan

    2014-01-01

    ). The figure shows transmission electron miscroscopy images of 9 nm diameter PtxY nanoparticles, based on high angle annular dark field –scanning transmission electron microscopy (left) and Y, Pt and combined Pt+Y X-ray energy dispersive X-ray spectroscopy elemental maps. (a) as-prepared catalyst and (b) after......The slow kinetics of the 4-electron reduction of oxygen to H2O imposes a bottleneck against the widespread uptake of low temperature fuel cells in automotive vehicles. High loadings of platinum are required to drive the reaction; the limited supply of this precious metal limits the extent to which...... fuel cell technology could be scaled up.(1) The most widely used strategy towards decreasing the Pt loading is to alloy Pt with other late transition metals, in particular Ni or Co. (2-5) However, when tested in a fuel cell, these alloys are often susceptible towards degradation via dealloying.(6, 7...

  9. Induction of heat shock proteins (hsp70) in the zebra mussel (Dreissena polymorpha) following exposure to platinum group metals (platinum, palladium and rhodium): Comparison with lead and cadmium exposures

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Christoph [Zoologisches Institut I-Oekologie, Universitaet Karlsruhe, Geb. 07.01, Kornblumenstrasse 13, D-76131 Karlsruhe (Germany); Zimmermann, Sonja [Zoologisches Institut I-Oekologie, Universitaet Karlsruhe, Geb. 07.01, Kornblumenstrasse 13, D-76131 Karlsruhe (Germany); Sures, Bernd [Zoologisches Institut I-Oekologie, Universitaet Karlsruhe, Geb. 07.01, Kornblumenstrasse 13, D-76131 Karlsruhe (Germany)]. E-mail: dc11@rz.uni-karlsruhe.de

    2005-10-05

    An increasing number of papers concentrate on the availability and uptake of platinum group elements (PGE) by different organisms. These metals are discharged into the environment from different anthropogenic sources, such as automobile catalytic converters, hospitals and other medical institutions. As the effects of these precious metals on organisms remain unclear, the induction of heat shock proteins (hsp70) in zebra mussels (Dreissena polymorpha) following exposure to soluble salts of platinum, palladium and rhodium was compared with the hsp70 induction in mussels following exposure to cadmium and lead. Mussels were sampled weekly during a period of 10 weeks and analyzed for their metal concentration and their hsp70 level. Highest metal uptake was found for Cd, followed by Pt, Pb and Pd. Rh demonstrated the lowest uptake rate. A clear time-dependent increase of hsp70 levels occurred in all exposed mussels. Concentrations of hsp70 started to rise between days 18 and 25, except for the Pt-exposed group, where the initial increase was between days 25 and 32. All groups reached maximal hsp70 concentrations at day 39. Subsequently, hsp70 levels decreased to initial levels for the remaining exposure period. Threshold metal levels for the hsp70 induction varied among the metals and increased in the order: Rh < Pd {<=} Pb < Pt < Cd. Highest hsp70 values were found for mussels exposed to Pd, with a 25-fold higher level than in the controls, followed by Pt- and Rh-exposed mussels, which showed a 19-fold increase. The hsp70 levels of the mussels exposed to Cd and Pb were much lower, showing 6- and 12-fold higher values than the control, respectively. The clear induction of hsp70 due to exposure to Pt, Pd and Rh gives evidence for strong cellular effects of these metals, especially, when compared with lead and cadmium. Among the metals tested, Pd seems to have the highest potential as inducer for hsp70 production due to its low threshold level in combination with the

  10. Induction of heat shock proteins (hsp70) in the zebra mussel (Dreissena polymorpha) following exposure to platinum group metals (platinum, palladium and rhodium): Comparison with lead and cadmium exposures

    International Nuclear Information System (INIS)

    Singer, Christoph; Zimmermann, Sonja; Sures, Bernd

    2005-01-01

    An increasing number of papers concentrate on the availability and uptake of platinum group elements (PGE) by different organisms. These metals are discharged into the environment from different anthropogenic sources, such as automobile catalytic converters, hospitals and other medical institutions. As the effects of these precious metals on organisms remain unclear, the induction of heat shock proteins (hsp70) in zebra mussels (Dreissena polymorpha) following exposure to soluble salts of platinum, palladium and rhodium was compared with the hsp70 induction in mussels following exposure to cadmium and lead. Mussels were sampled weekly during a period of 10 weeks and analyzed for their metal concentration and their hsp70 level. Highest metal uptake was found for Cd, followed by Pt, Pb and Pd. Rh demonstrated the lowest uptake rate. A clear time-dependent increase of hsp70 levels occurred in all exposed mussels. Concentrations of hsp70 started to rise between days 18 and 25, except for the Pt-exposed group, where the initial increase was between days 25 and 32. All groups reached maximal hsp70 concentrations at day 39. Subsequently, hsp70 levels decreased to initial levels for the remaining exposure period. Threshold metal levels for the hsp70 induction varied among the metals and increased in the order: Rh < Pd ≤ Pb < Pt < Cd. Highest hsp70 values were found for mussels exposed to Pd, with a 25-fold higher level than in the controls, followed by Pt- and Rh-exposed mussels, which showed a 19-fold increase. The hsp70 levels of the mussels exposed to Cd and Pb were much lower, showing 6- and 12-fold higher values than the control, respectively. The clear induction of hsp70 due to exposure to Pt, Pd and Rh gives evidence for strong cellular effects of these metals, especially, when compared with lead and cadmium. Among the metals tested, Pd seems to have the highest potential as inducer for hsp70 production due to its low threshold level in combination with the

  11. Multi-elemental characterization of tunnel and road dusts in Houston, Texas using dynamic reaction cell-quadrupole-inductively coupled plasma–mass spectrometry: Evidence for the release of platinum group and anthropogenic metals from motor vehicles

    International Nuclear Information System (INIS)

    Spada, Nicholas; Bozlaker, Ayse; Chellam, Shankararaman

    2012-01-01

    Highlights: ► Analytical method for PGEs, main group, transition and rare earth metals developed. ► Comprehensive characterization of road and tunnel dust samples was accomplished. ► PGEs in dusts arise from autocatalyst attrition. ► Mobile sources also contributed to Cu, Zn, Ga, As, Mo, Cd, Sn, Sb, Ba, W and Pb. ► All other elements, including rare earths arose from crustal sources. - Abstract: Platinum group elements (PGEs) including Rh, Pd, and Pt are important tracers for vehicular emissions, though their measurement is often challenging and difficult to replicate in environmental campaigns. These challenges arise from sample preparation steps required for PGE quantitation, which often cause severe isobaric interferences and spectral overlaps from polyatomic species of other anthropogenically emitted metals. Consequently, most previous road dust studies have either only quantified PGEs or included a small number of anthropogenic elements. Therefore a novel analytical method was developed to simultaneously measure PGEs, lanthanoids, transition and main group elements to comprehensively characterize the elemental composition of urban road and tunnel dusts. Dust samples collected from the vicinity of high-traffic roadways and a busy underwater tunnel restricted to single-axle (predominantly gasoline-driven) vehicles in Houston, TX were analyzed for 45 metals with the newly developed method using dynamic reaction cell-quadrupole-inductively coupled plasma–mass spectrometry (DRC-q-ICP–MS). Average Rh, Pd and Pt concentrations were 152 ± 52, 770 ± 208 and 529 ± 130 ng g −1 respectively in tunnel dusts while they varied between 6 and 8 ng g −1 , 10 and 88 ng g −1 and 35 and 131 ng g −1 in surface road dusts. Elemental ratios and enrichment factors demonstrated that PGEs in dusts originated from autocatalyst attrition/abrasion. Strong evidence is also presented for mobile source emissions of Cu, Zn, Ga, As, Mo, Cd, Sn, Sb, Ba, W and Pb. However

  12. Nuclear analytical methods for platinum group elements

    International Nuclear Information System (INIS)

    2005-04-01

    Platinum group elements (PGE) are of special interest for analytical research due to their economic importance like chemical peculiarities as catalysts, medical applications as anticancer drugs, and possible environmental detrimental impact as exhaust from automobile catalyzers. Natural levels of PGE are so low in concentration that most of the current analytical techniques approach their limit of detection capacity. In addition, Ru, Rh, Pd, Re, Os, Ir, and Pt analyses still constitute a challenge in accuracy and precision of quantification in natural matrices. Nuclear analytical techniques, such as neutron activation analysis, X ray fluorescence, or proton-induced X ray emission (PIXE), which are generally considered as reference methods for many analytical problems, are useful as well. However, due to methodological restrictions, they can, in most cases, only be applied after pre-concentration and under special irradiation conditions. This report was prepared following a coordinated research project and a consultants meeting addressing the subject from different viewpoints. The experts involved suggested to discuss the issue according to the (1) application, hence, the concentration levels encountered, and (2) method applied for analysis. Each of the different fields of application needs special consideration for sample preparation, PGE pre-concentration, and determination. Additionally, each analytical method requires special attention regarding the sensitivity and sample type. Quality assurance/quality control aspects are considered towards the end of the report. It is intended to provide the reader of this publication with state-of-the-art information on the various aspects of PGE analysis and to advise which technique might be most suitable for a particular analytical problem related to platinum group elements. In particular, many case studies described in detail from the authors' laboratory experience might help to decide which way to go. As in many cases

  13. A survey of the determination of the platinum group elements.

    Science.gov (United States)

    Kallmann, S

    1987-08-01

    The platinum-group metals (PGMs), Ru, Rh, Pd, Os, Ir and Pt, are widely used as catalysts in petroleum and chemical processes. They find wide applications in automotive exhaust-gas control converters and are of immense importance to the electronics industry. They are found in many items of jewellery and serve to an increasing extent as a form of investment. The PGMs are extracted in minute quantities from a limited number of ores, found mainly in S. Africa and the USSR. They are concentrated and separated from each other by elaborate chemical processes. Because of their great intrinsic value (Pt $650 per oz; Rh $1400 per oz), the recycling of the PGMs from literally hundreds of different forms of scrap is an essential factor in the overall management of the PGM economy. In this survey emphasis is placed on the need to tailor the analytical method according to (a) the environment in which the PGMs occur, (b) the individual PGM concentrations, and (c) the desired sensitivity and precision. The factors which determine the choice of chemical, physicochemical and/or instrumental approaches are discussed. They are further commented on in extensive presentations of dissolution and separation techniques and methods for the final measurement of individual PGMs. Appendices are provided which present the compositions and sources of the products most frequently encountered in PGM analysis, along with information on methods of decomposition, separations required, type of separation, and final determination.

  14. Accumulation of platinum group elements by the marine gastropod Littorina littorea

    Energy Technology Data Exchange (ETDEWEB)

    Mulholland, Rachel [School of Geography, Earth and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Turner, Andrew, E-mail: aturner@plymouth.ac.uk [School of Geography, Earth and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom)

    2011-04-15

    The accumulation and trophic transfer of the platinum group elements (PGE): Rh, Pd and Pt; have been studied in short-term (5 day) exposures conducted in aquaria containing the marine macroalga, Ulva lactuca, and/or the grazing mollusc, Littorina littorea. Metals added to sea water (to concentrations of 20 {mu}g L{sup -1}) were taken up by U. lactuca in the order Rh, Pt > Pd and by L. littorea in the order Pd {>=} Pt {>=} Rh, with greatest metal accumulation in the latter generally occurring in the visceral complex and kidney. When fed contaminated alga, accumulation of Rh and Pd by L. littorea, relative to total available metal, increased by an order of magnitude, while accumulation of Pt was not readily detected. We conclude that the diet is the most important vector for accumulation of Rh and Pd, while accumulation of Pt appears to proceed mainly from the aqueous phase. - Research highlights: > Platinum group elements are accumulated by, Littorina littorea. > The aqueous phase and diet are important vehicles for Rh and Pd accumulation by the snail. > Grazing molluscs may serve as biomonitors of coastal PGE contamination. - Platinum group elements are accumulated by the marine snail, Littorina littorea, from both the aqueous phase and the diet.

  15. Platinum-group elements in the Eastern Deccan volcanic province ...

    Indian Academy of Sciences (India)

    This study is the first detailed investigation of the platinum-group elements (PGE) at the eastern mar- ... A Zr vs. Pd scattergram found a strong positive correlation for these two elements ..... and the PGE and Au collected by co-precipitation.

  16. Platinum-Group Elements in Soils and Street Dust of the Southeastern Administrative District of Moscow

    Science.gov (United States)

    Ladonin, D. V.

    2018-03-01

    The contents of five platinum-group metals (Ru, Rh, Pd, Ir, and Pt) in soils and street dust of the Southeastern administrative district (SEAD) of Moscow have been determined. The contents of these elements in soils may considerably exceed their natural abundances in the lithosphere and are characterized by considerable variability and asymmetric frequency distribution. A close correlation between Rh, Pd, and Pt contents in soils and street dust has been shown. The data on the contents of the elements and the ratios between them suggest that motor vehicles are the major source of pollution of soils and street dust in the studied district.

  17. Segregation of the elements of the platinum group in a simulated high-level waste glass

    International Nuclear Information System (INIS)

    Mitamura, H.; Banba, T.; Kamizono, H.; Kiriyama, Y.; Kumata, M.; Murakami, T.; Tashiro, S.

    1983-01-01

    Segregation of the elements of the platinum group occurred during vitrification of the borosilicate glass containing 20 wt% simulated high-level waste oxides. The segregated materials were composed of two crystalline phases: one was the solid solution of ruthenium and rhodium dioxides and the other was that of palladium and rhodium metals also with tellurium. The segregated materials were not distributed homogeneously throughout the glass: (i) on the surface of the glass, there occurred palladium, rhodium and tellurium alloy alone; and (ii) at the inner part of the glass, the agglomerates of the two phases were concentrated in one part and dispersed in the other

  18. Separation and preconcentration of platinum-group metals from spent autocatalysts solutions using a hetero-polymeric S, N-containing sorbent and determination by high-resolution continuum source graphite furnace atomic absorption spectrometry.

    Science.gov (United States)

    Eskina, Vasilina V; Dalnova, Olga A; Filatova, Daria G; Baranovskaya, Vasilisa B; Karpov, Yuri A

    2016-10-01

    This paper describes the potential of high-resolution continuum source graphite furnace atomic absorption spectrometry for determination of Pt, Pd and Rh after separation and concentration by original in-house developed heterochain polymer S, N-containing sorbent. The methods of sample preparation of spent ceramic-based autocatalysts were considered, two of which were used: autoclave decomposition in mixture of acids HCl:HNO3 (3:1) and high-temperature melting with K2S2O7. Both methods anyway limit the direct determination of analytes by HR CS GFAAS. Using the first method it is an incomplete digestion of spent autocatalysts samples, since the precipitate is Si, and the rhodium metal dissolves with difficulty and partially passes into solution. In contrast to the first method, the second method allow to completely transfer analytes into solution, however, the background signal produced by the chemical composition of the flux, overlaps the analytical zone. It was found, that Pt, Pd and Rh contained in the spent ceramic automotive catalysts could be effectively separated and concentrated by heterochain polymer S, N-containing sorbent, which has high sorption capacity, selectivity and resistant to dilute acids. The chosen HR CS GFAAS analysis conditions enable us to determine Pt, Pd and Rh with good metrological characteristics. The concentrations of Pt, Pd and Rh in two samples of automobile exhaust catalysts were found in range of 0.00015-0.00050; 0.170-0.189; 0.0180-0.0210wt%, respectively. The relative standard deviation obtained by HR CS GFAAS was not more than 5%. Limits of detection by HR CS GFAAS achieved were 6.2·10(-6)wt% for Pt, 1.8·10(-6)wt% for Pd, and 3.4·10(-6)wt% for Rh. Limits of determination achieved by HR CS GFAAS were 1.1·10(-5)wt% for Pt, 6.9·10(-5)wt% for Pd, and 8.3·10(-5)wt% for Rh. To control the accuracy of PGM in sorption concentrates by HR CS GFAAS method, it was appropriate to conduct an inter-method comparative experiment. The

  19. Platinum Group Metal Recycling Technology Development - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence Shore

    2009-08-19

    BASF Catalysts LLC, formerly Engelhard Corporation, has completed a project to recover Pt from PEM fuel cell membrane electrode assemblies. The project, which began in 2003, has met the project objective of an environmentally-friendly, cost-effective method for recovery of platinum without release of hydrogen fluoride. This has been achieved using a combination of milling, dispersion and acid leaching. 99% recovery of Pt was achieved, and this high yield can be scaled up using one vessel for a single leach and rinse. Leaching was been successfully achieved using a 10% solids level, double the original target. At this solids content, the reagent and utility costs represent ~0.35% of the Pt value of a lot, using very conservative assumptions. The main cost of the process is capital depreciation, followed by labor.

  20. Accumulation and distribution characteristics of platinum group elements in roadside dusts in Beijing, China.

    Science.gov (United States)

    Gao, Bo; Yu, Yanke; Zhou, Huaidong; Lu, Jin

    2012-06-01

    The concentrations, distribution, and accumulation of platinum group elements (PGEs) were investigated in roadside dusts collected in four different foundational areas in Beijing during February to May 2010. The results showed that PGE levels in all samples were above the average upper crust values, with mean concentrations of 57.5 ng · g(-1) Pd, 28.2 ng · g(-1) Pt, and 9.8 ng · g(-1) Rh, respectively. Palladium concentration has increased rapidly in recent years. The rank of PGE levels in four different functional regions for roadside dusts was: heavy density traffic area > residential area > educational area > tourism area. Palladium, Pt, and Rh concentrations in dusts showed strong positive correlations, indicating a common traffic-related source of these metals. Meanwhile, PGEs in these samples were not correlated with other traffic-related metals except for Cr. The average PGE ratios of road dusts from Beijing were consistent with those in Germany and Western Australia, but lower than those in the United States and Mexico, indicating that various catalyst productions were used in different countries. In addition, grain-size partitioning of PGEs in dusts indicated that concentrations of PGEs differed from one particle size to another. The coarse fraction had higher PGE concentrations than the fine fraction in roadside dusts. These results showed that autocatalyst PGE contamination estimates in the environment would be significantly underestimated if only a fine-grain size fraction (<0.063 mm) is analyzed. Copyright © 2012 SETAC.

  1. Gibbs Free Energy of Formation for Selected Platinum Group Minerals (PGM

    Directory of Open Access Journals (Sweden)

    Spiros Olivotos

    2016-01-01

    Full Text Available Thermodynamic data for platinum group (Os, Ir, Ru, Rh, Pd and Pt minerals are very limited. The present study is focused on the calculation of the Gibbs free energy of formation (ΔfG° for selected PGM occurring in layered intrusions and ophiolite complexes worldwide, applying available experimental data on their constituent elements at their standard state (ΔG = G(species − ΔG(elements, using the computer program HSC Chemistry software 6.0. The evaluation of the accuracy of the calculation method was made by the calculation of (ΔGf of rhodium sulfide phases. The calculated values were found to be ingood agreement with those measured in the binary system (Rh + S as a function of temperature by previous authors (Jacob and Gupta (2014. The calculated Gibbs free energy (ΔfG° followed the order RuS2 < (Ir,OsS2 < (Pt, PdS < (Pd, PtTe2, increasing from compatible to incompatible noble metals and from sulfides to tellurides.

  2. High salinity volatile phases in magmatic Ni-Cu-platinum group element deposits

    Science.gov (United States)

    Hanley, J. J.; Mungall, J. E.

    2004-12-01

    The role of "deuteric" fluids (exsolved magmatic volatile phases) in the development of Ni-Cu-PGE (platinum group element) deposits in mafic-ultramafic igneous systems is poorly understood. Although considerable field evidence demonstrates unambiguously that fluids modified most large primary Ni-Cu-PGE concentrations, models which hypothesize that fluids alone were largely responsible for the economic concentration of the base and precious metals are not widely accepted. Determination of the trace element composition of magmatic volatile phases in such ore-forming systems can offer considerable insight into the origin of potentially mineralizing fluids in such igneous environments. Laser ablation ICP-MS microanalysis allows researchers to confirm the original metal budget of magmatic volatile phases and quantify the behavior of trace ore metals in the fluid phase in the absence of well-constrained theoretical or experimental predictions of ore metal solubility. In this study, we present new evidence from major deposits (Sudbury, Ontario, Canada; Stillwater Complex, Montana, U.S.A.) that compositionally distinct magmatic brines and halide melt phases were exsolved from crystallizing residual silicate melt and trapped within high-T fluid conduits now comprised of evolved rock compositions (albite-quartz graphic granite, orthoclase-quartz granophyre). Petrographic evidence demonstrates that brines and halide melts coexisted with immiscible carbonic phases at the time of entrapment (light aliphatic hydrocarbons, CO2). Brine and halide melt inclusions are rich in Na, Fe, Mn, K, Pb, Zn, Ba, Sr, Al and Cl, and homogenize by either halite dissolution at high T ( ˜450-700° C) or by melting of the salt phase (700-800° C). LA-ICPMS analyses of single inclusions demonstrate that high salinity volatile phases contained abundant base metals (Cu, Fe, Sn, Bi) and precious metals (Pt, Pd, Au, Ag) at the time of entrapment. Notably, precious metal concentrations in the inclusions

  3. Concentration and measuring Platinum Group Elements (PGE) Transfer Factor in soil and vegetations

    International Nuclear Information System (INIS)

    Adibah Sakinah Oyub

    2012-01-01

    This study was conducted to determine the concentration and to measure platinum group elements (PGE) transfer factor in environmental samples of roadside soil and vegetation. The use of vehicle catalytic converter has released platinum group elements (PGE) and other gases into the environment. Thus, roadside soil and plants were exposed to this element and has become the medium for the movement of this elements. Samples of roadside soil and vegetation were taken at various locations in UKM Bangi Toll and the concentration of platinum group elements (PGE) is determined using mass spectrometry-inductively coupled plasma (ICP-MS). Overall, the concentrations of platinum group elements (PGE), which is the element platinum (Pt) in soil was 0.016 ± 0.036 μgg -1 . While the concentration of the elements palladium (Pd) was 0.079 ± 0.019 μgg -1 and element rhodium (Rh) is at a concentration of 0.013 ± 0.020 μgg -1 . Overall, the transfer factor for the element platinum (Pt) is 1. While the transfer factor of the element palladium (Pd) is 0.96 and the element rhodium (Rh) is 1.11. In conclusion, the concentration of platinum group elements (PGE) in soils have increased. (author)

  4. Platinum group elements in the environment: emissions and exposure.

    Science.gov (United States)

    Dubiella-Jackowska, Aleksandra; Polkowska, Zaneta; Namieńnik, Jacek

    2009-01-01

    PGEs (Pt, Pd, Ru, Ir, and Os) are a relatively new group of anthropogenic pollutants. Specific useful properties of these metals (high resistance to chemical corrosion over a wide range of temperatures, high melting point, high mechanical resistance, and high plasticity) have fomented rapid growth of new and existing applications in various economic and industrial sectors. These metals are not only used in the chemical, petrochemical, electrical, and electronics industries but also PGE use, in various industries, has dramatically increased emissions of these metals to the environment; emissions from vehicle catalytic converters and hospital wastewater discharges are particularly significant. The environmental benefits of using PGEs in vehicle catalytic converters are clear. These metals catalyze the conversion of toxic constituents of exhaust fumes (CO, HCs, NOxs) to water, CO2, and molecular nitrogen. As a result of adverse physico-chemical and mechanical influences on the catalyst surface, PGEs are released from this layer and are emitted into the environment in exhaust fumes. Research results indicate that the levels of such emissions are rather low (ng km(-1)). However, recent data show that certain chemical forms of PGEs emitted from vehicles are, or may be, bioavailable. Hence, the potential for PGEs to bioaccumulate in different environmental compartments should be studied, and, if necessary, addressed. The use of Pt in anticancerous drug preparations also contributes to environmental burdens. Pt, when administered as a drug, is excreted in a patient's urine and, as a consequence, has been observed in hospital and communal wastewater discharges. Few studies have been published that address bioavailability, mode of penetration into live organisms, or environmental fate of PGEs. The toxic effect of these metals on living organisms, including humans, is still in dispute and incompletely elucidated. Contrary to some chlorine complexes of Pt, which most

  5. Factors Governing concentration of platinum group elements in layered complexes

    DEFF Research Database (Denmark)

    Makovicky, E.; Rose-Hansen, J.; Karup-Møller, Sven

    1996-01-01

    This report covers the synthetic research results obtained by the Danish group on: (1) The phase system Fe-Ir-S at 1100o, 1000o and 800oC, (2) Metal-rich portions of the phase system Pt-Ir-Fe-S: Pt-Fe-Ir alloys and associated sulfides at 1000oC and 1100oC, (3) The Fe (Cu)-Pt-Rh-S system: alloys...

  6. High pressure stability of the monosilicides of cobalt and the platinum group elements

    International Nuclear Information System (INIS)

    Hernandez, J.A.; Vočadlo, L.; Wood, I.G.

    2015-01-01

    Highlights: • We model the high-pressure phases of cobalt- and platinum-group-monosilicides. • CoSi, RuSi, OsSi transform with pressure from the ε-FeSi to the CsCl structure. • RhSi and IrSi transform with pressure from the MnP structure to the ε-FeSi structure. • PdSi and PtSi transform with pressure from the MnP structure to the CuTi structure. - Abstract: The high pressure stability of CoSi, RuSi, RhSi, PdSi, OsSi, IrSi and PtSi was investigated by static first-principles calculations up to 300 GPa at 0 K. As found experimentally, at atmospheric pressure, CoSi, RuSi and OsSi were found to adopt the cubic ε-FeSi structure (P2 1 3) whereas RhSi, PdSi, IrSi and PtSi were found to adopt the orthorhombic MnP (Pnma) structure. At high pressure, CoSi, RuSi and OsSi show a phase transition to the CsCl structure (Pm3 ¯ m) structure at 270 GPa, 7 GPa and 6 GPa respectively. RhSi and IrSi were found to transform to an ε-FeSi structure at 10 GPa and 25 GPa. For PdSi and PtSi, a transformation from the MnP structure to the tetragonal CuTi structure (P4/nmm) occurs at 13 GPa and 20 GPa. The pressure dependence of the electronic density of states reveals that RuSi and OsSi are semiconductors in the ε-FeSi structure and become metallic in the CsCl structure. RhSi and IrSi are metals in the MnP structure and become semimetals in their high pressure ε-FeSi form. CoSi in the ε-FeSi configuration is a semimetal. PdSi and PtSi remain metallic throughout up to 300 GPa

  7. Platinum-group elements fractionation by selective complexing, the Os, Ir, Ru, Rh-arsenide-sulfide systems above 1020 °C

    Science.gov (United States)

    Helmy, Hassan M.; Bragagni, Alessandro

    2017-11-01

    The platinum-group element (PGE) contents in magmatic ores and rocks are normally in the low μg/g (even in the ng/g) level, yet they form discrete platinum-group mineral (PGM) phases. IPGE (Os, Ir, Ru) + Rh form alloys, sulfides, and sulfarsenides while Pt and Pd form arsenides, tellurides, bismuthoids and antimonides. We experimentally investigate the behavior of Os, Ru, Ir and Rh in As-bearing sulfide system between 1300 and 1020 °C and show that the prominent mineralogical difference between IPGE (+Rh) and Pt and Pd reflects different chemical preference in the sulfide melt. At temperatures above 1200 °C, Os shows a tendency to form alloys. Ruthenium forms a sulfide (laurite RuS2) while Ir and Rh form sulfarsenides (irarsite IrAsS and hollingworthite RhAsS, respectively). The chemical preference of PGE is selective: IPGE + Rh form metal-metal, metal-S and metal-AsS complexes while Pt and Pd form semimetal complexes. Selective complexing followed by mechanical separation of IPGE (and Rh)-ligand from Pt- and Pd-ligand associations lead to PGE fractionation.

  8. Emerging airborne contaminants in India: Platinum Group Elements from catalytic converters in motor vehicles

    International Nuclear Information System (INIS)

    Sen, Indra S.; Mitra, Arijeet; Peucker-Ehrenbrink, Bernhard; Rothenberg, Sarah E.; Tripathi, Sachchida Nand; Bizimis, Michael

    2016-01-01

    Platinum Group Element (PGE) pollution on the Indian subcontinent is a growing concern because vehicle sales in India have rapidly increased over the last decade, and it is well known that automobile catalytic converters are one of the major source of anthropogenic PGE in the environment. Despite the rapid growth of the Indian automobile industry, the sources and magnitude of PGE contamination in Indian airborne particles are unknown. In this study we report PGE and mercury (Hg) concentrations, as well as osmium isotope ratios ( 187 Os/ 188 Os) of airborne particles (PM 10 ) collected in Kanpur, a large industrial city in India. We estimate that 61 ± 22%, 32 ± 24%, and 7 ± 3% of the total Os fraction are derived from eroding upper continental crust, catalytic converters fitted in the exhaust system of motor vehicles, and fossil fuel combustion, respectively. Only one sample had a ten times higher (∼76%) than average contribution from fossil fuel. Unlike Os, Pt is predominantly (84 ± 10%) derived from anthropogenic sources. Platinum Group Element and Hg concentrations are not well correlated. However, the highest concentration of particulate Hg corresponds to the most radiogenic 187 Os/ 188 Os isotope ratios (4.6). Our results further indicated that PGE/Ir ratios could be successfully used to quantify the relative proportions of natural and anthropogenic PGE sources in aerosol samples. Since PGE and Hg data on Indian environmental samples are scarce, this study provides an interpretive framework that calls for additional assessments of PGE and Hg concentrations in environmental samples from India. - Highlights: • Platinum Group Element Pollution is a growing concern in Asia. • Osmium isotopes as tracers of PGE sources is proposed. • Platinum Group Element pollution in India.

  9. Outstanding low temperature HC-SCR of NOx over platinum-group catalysts supported on mesoporous materials expecting diesel-auto emission regulation

    International Nuclear Information System (INIS)

    Komatsu, Tamikuni; Tomokuni, Keizou; Yamada, Issaku

    2006-01-01

    Outstanding low temperature HC-SCR of NOx over platinum-group catalysts supported on mesoporous materials, which does not rely on the conventional NOx-absorption-reduction-catalysts, is presented for the purpose of de-NOx of diesel-auto emissions. The established catalysts basically consist of mesoporous silica or metal-substituted mesoporous silicates for supports and platinum for active species, which is operated under lean- and rich-conditions. The new catalysts are very active at 150-200 o C and free from difficult problems of SOx-deactivation and hydrothermal ageing of the NOx-absorption-reduction catalyst. (author)

  10. pH-dependent release of trace elements including platinum group elements (PGEs) from gasoline and diesel catalysts

    Science.gov (United States)

    Sucha, Veronika; Mihaljevic, Martin; Ettler, Vojtech; Strnad, Ladislav

    2014-05-01

    The release of trace metals and platinum group elements (PGEs) from automobile exhaust catalysts represents a remarkable source of higly dispersed environmental contamination. Especially, PGEs have shown increasing research interest due to their possible bioaccessibility. In our research, we focused on leaching behaviour of trace metals from gasoline and diesel automobile catalysts. While catalysts for gasoline engines contain a mixture of Pt-Pd-Rh or Pd-Rh, catalysts for diesel engines are composed only of Pt. We used dust from two crushed gasoline and two crushed diesel catalysts (new and aged). The dust of gasoline catalysts contains significant concentrations of Pt (700 mg.kg-1), Pd (11 000 mg.kg-1) and Rh (700 mg.kg-1). And the dust of diesel catalysts are composed of Pt (3 900 mg.kg-1) and they contains negligible amounts of Pd dan Rh (leaching of trace metals from dust we used pH-stat leaching test according to the European standard CEN/TS 14997. The concentrations of cations: PGEs (Pt, Pd a Rh), K, Na, Ca, Mg, Al, Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd, Pb, La and Ce were determined by inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS), and anions: F-, Cl-, SO42- and NO3- by high-performance liquid chromatography. Although the dusts from catalysts were relatively stable to acid/base influence, the leaching of trace metals from catalysts showed a dependence on pH. Generally, the highest concentrations were released under acidic conditions. The leaching of PGEs was higher for Pt in diesel catalysts and for Pd and Rh in gasoline catalysts. The highest concentrations of Zn and Pb were observed in old catalysts. The rare earth metals were released more from gasoline catalysts. Catalysts particles represent health risk especially with respect to their PGEs contents.

  11. Strategic and tactical determinants for South African platinum-group-metals supply

    CSIR Research Space (South Africa)

    McGill, JE

    2011-11-01

    Full Text Available continue deep development on the western limb, move to open shallower mines in the eastern limb, or adopt a combination of both approaches. To investigate the viability of eastern limb resources, and reserves, three main issues require consideration...-run forecast of demand and supply dynamics, and commodity prices, underpin a continued need for PGM production. National policy framework Strategic 2 Legislative environment supports the development of PGM resources in South Africa. Direct eastern limb...

  12. WINCO Metal Recycle annual report, FY 1993

    International Nuclear Information System (INIS)

    Bechtold, T.E.

    1993-12-01

    This report is a summary of the first year progress of the WINCO Metal Recycle Program. Efforts were directed towards assessment of radioactive scrap metal inventories, economics and concepts for recycling, technology development, and transfer of technology to the private sector. Seven DOE laboratories worked together to develop a means for characterizing scrap metal. Radioactive scrap metal generation rates were established for several of these laboratories. Initial cost estimates indicate that recycle may be preferable over burial if sufficient decontamination factors can be achieved during melt refining. Radiation levels of resulting ingots must be minimized in order to keep fabrication costs low. Industry has much of the expertise and capability to execute the recycling of radioactive scrap metal. While no single company can sort, melt, refine, roll and fabricate, a combination of two to three can complete this operation. The one process which requires development is in melt refining for removal of radionuclides other than uranium. WINCO is developing this capability in conjunction with academia and industry. This work will continue into FY-94

  13. WINCO Metal Recycle annual report, FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Bechtold, T.E. [ed.

    1993-12-01

    This report is a summary of the first year progress of the WINCO Metal Recycle Program. Efforts were directed towards assessment of radioactive scrap metal inventories, economics and concepts for recycling, technology development, and transfer of technology to the private sector. Seven DOE laboratories worked together to develop a means for characterizing scrap metal. Radioactive scrap metal generation rates were established for several of these laboratories. Initial cost estimates indicate that recycle may be preferable over burial if sufficient decontamination factors can be achieved during melt refining. Radiation levels of resulting ingots must be minimized in order to keep fabrication costs low. Industry has much of the expertise and capability to execute the recycling of radioactive scrap metal. While no single company can sort, melt, refine, roll and fabricate, a combination of two to three can complete this operation. The one process which requires development is in melt refining for removal of radionuclides other than uranium. WINCO is developing this capability in conjunction with academia and industry. This work will continue into FY-94.

  14. INEL metal recycle annual report, FY-94

    International Nuclear Information System (INIS)

    Bechtold, T.E.

    1994-09-01

    In 1992, the mission of the Idaho Chemical Processing Plant was changed from reprocessing of spent nuclear fuels to development of technologies for conditioning of spent nuclear fuels and other high-level wastes for disposal in a geologic repository. In addition, the Department of Energy (DOE) directed Idaho National Engineering Laboratory (INEL) to develop a program plan addressing the management of radioactive contaminated scrap metal (RSM) within the DOE complex. Based on discussions with the EM-30 organization, the INEL Metal Recycle program plan was developed to address all issues of RSM management. Major options considered for RSM management were engineered interim storage, land disposal as low-level waste, and beneficial reuse/recycle. From its inception, the Metal Recycle program has emphasized avoidance of storage and disposal costs through beneficial reuse of RSM. The Metal Recycle program plan includes three major activities: Site-by-site inventory of RSM resources; validation of technologies for conversion of RSM to usable products; and identification of parties prepared to participate in development of a RSM recycle business

  15. Micrometer- and nanometer-sized platinum group nuggets in micrometeorites from deep-sea sediments of the Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Rudraswami, N.G.; Parashar, K.; ShyamPrasad, M.

    We examined 378 micrometeorites collected from deep-sea sediments of the Indian Ocean of which 175, 180, and 23 are I-type, S-type, and G-type, respectively. Of the 175 I-type spherules, 13 contained platinum group element nuggets (PGNs...

  16. Revisiting platinum group elements of Late Permian coals from western Guizhou Province, SW China

    Energy Technology Data Exchange (ETDEWEB)

    Qi, Liang [State Key Lab of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences, Guiyang, 550002 (China); Gao, Jianfeng [Department of Earth Sciences, The University of Hong Kong, Pokfulam Road, Hong Kong SAR (China)

    2008-08-05

    Twenty five coal samples from the Late Permian coal-bearing strata in Weining, Nayong, and Zhijin, western Guizhou Province, SW, China, were analyzed for platinum group elements (PGEs). The coal ashes were digested by the Carius tube technique and accurately measured by isotope dilution-inductively coupled plasma mass spectrometry (ID-ICP-MS) for all PGEs. The results are much lower than the previous reported values. Our study suggested that the previously reported PGE values are incorrect and may due to the polyatomic interferences in ICP-MS measurements. In our study, samples from the Weining coalfield have the lowest PGE contents (from 0.019 Ir to 0.42 ng/g Pd), which represent the PGE background value in coal in western Guizhou province. Some of the coals have Pt and Pd contents about 20-times higher than the background value, indicating PGEs are concentrated. We also reported new and reliable PGE data and background value of coal in western Guizhou province, SW, China, and suggested to rework the PGE background values of Chinese coals. (author)

  17. Environmental routes for platinum group elements to biological materials. A review

    Energy Technology Data Exchange (ETDEWEB)

    Ek, Kristine H.; Morrison, Gregory M. [Water Environment Transport, Chalmers University of Technology, SE 412 96 Goteborg (Sweden); Rauch, Sebastien [R.M. Parsons Laboratory 48-108, Massachusetts Institute of Technology, Cambridge, MA 02139 (United States)

    2004-12-01

    The increased use of platinum group elements (PGE) in automobile catalysts has led to concern over potential environmental and biological accumulation. Platinum (Pt), palladium (Pd) and rhodium (Rh) concentrations have increased in the environment since the introduction of automobile catalysts. This review summarises current knowledge concerning the environmental mobility, speciation and bioavailability of Pt, Pd and Rh. The greater proportion of PGE emissions is from automobile catalysts, in the form of nanometer-sized catalyst particles, which deposit on roadside surfaces, as evidenced in samples of road dust, grass and soil. In soil, PGE can be transformed into more mobile species through complexation with organic matter and can be solubilised in low pH rainwater. There are indications that environmentally formed Pd species are more soluble and hence more mobile in the environment than Rh and Pt. PGE can reach waterbodies through stormwater transport and deposition in sediments. Besides external contamination of grass close to roads, internal PGE uptake has been observed for plants growing on soil contaminated with automobile catalyst PGE. Fine particles of PGE were also detected on the surface of feathers sampled from passerines and raptors in their natural habitat, and internal organs of these birds also contained PGE. Uptake has been observed in sediment-dwelling invertebrates, and laboratory studies have shown an uptake of PGE in eel and fish exposed to water containing road dust.The available evidence indicates that the PGE, especially Pd, are transported to biological materials through deposition in roots by binding to sulphur-rich low molecular weight species in plants. PGE uptake to exposed animals have uptake rates in the following order: Pd>Pt>Rh. The liver and kidney accumulate the highest levels of PGE, especially Pd. Urinary Pd and Rh, but not Pt, levels are correlated with traffic intensity. Dental alloys may lead to elevated urinary Pt levels

  18. The fire assay preconcentration of the platinum group elements for the neutron activation analysis of geological material

    International Nuclear Information System (INIS)

    Parry, S.J.

    1994-01-01

    This paper describes the work that has been carried out using neutron activation analysis (NAA) to develop a rapid and reliable method for the determination of the platinum group elements (PGE: Pt, Pd, Ir, Ru, Rh, and Os) and Au in geological, environmental and industrial samples. The method is based on the now established method of preconcentration with fire assay, followed by NAA of the separated PGE and Au. Recent developments have seen improvements in the technique to eliminate losses due to dissolution procedures, and complete recovery of the elements prior to analysis. The method is now being used to validate inductively coupled plasma-mass spectroscopy methods for analysis of the PGE

  19. Determination of platinum-group elements in the geological standard reference materials by isotope dilution-ICPMS

    Energy Technology Data Exchange (ETDEWEB)

    Mingyue, Hu; Hongliao, He [National Research Center for Geoanalysis, Beijing (China)

    2005-10-15

    Platinum group elements (PGEs) includes platinum, palladium, iridium, osmium, rhodium and ruthenium. It has very high economic and scientific value in the field of geoscience and environmental science. But the analysis data referred by the different lab are very disperse because of the difficulty of the determination of PGEs. It makes very difficult to fix the value of the PGEs in the standard reference materials. In the article, the values of the PGEs in the standard reference materials of ocean sediment are determined by isotope dilution technique and dependable values of these elements are provided. (authors)

  20. Determination of platinum-group elements in the geological standard reference materials by isotope dilution-ICPMS

    International Nuclear Information System (INIS)

    Hu Mingyue; He Hongliao

    2005-01-01

    Platinum group elements (PGEs) includes platinum, palladium, iridium, osmium, rhodium and ruthenium. It has very high economic and scientific value in the field of geoscience and environmental science. But the analysis data referred by the different lab are very disperse because of the difficulty of the determination of PGEs. It makes very difficult to fix the value of the PGEs in the standard reference materials. In the article, the values of the PGEs in the standard reference materials of ocean sediment are determined by isotope dilution technique and dependable values of these elements are provided. (authors)

  1. Empirical constraints on partitioning of platinum group elements between Cr-spinel and primitive terrestrial magmas

    Science.gov (United States)

    Park, Jung-Woo; Kamenetsky, Vadim; Campbell, Ian; Park, Gyuseung; Hanski, Eero; Pushkarev, Evgeny

    2017-11-01

    Recent experimental studies and in situ LA-ICP-MS analysis on natural Cr-spinel have shown that Rh and IPGEs (Ir-group platinum group elements: Ru, Ir, Os) are enriched in the lattice of Cr-spinel. However, the factors controlling the partitioning behaviour of these elements are not well constrained. In this study, we report the Rh, IPGE, and trace element contents in primitive Cr-spinel, measured by LA-ICP-MS, from nine volcanic suites covering various tectonic settings including island arc picrites, boninites, large igneous province picrites and mid-ocean ridge basalts. The aim is to understand the factors controlling the enrichment of Rh and IPGEs in Cr-spinels, to estimate empirical partition coefficients between Cr-spinel and silicate melts, and to investigate the role of Cr-spinel fractional crystallization on the PGE geochemistry of primitive magmas during the early stages of fractional crystallization. There are systematic differences in trace elements, Rh and IPGEs in Cr-spinels from arc-related magmas (Arc Group Cr-spinel), intraplate magmas (Intraplate Group Cr-spinel), and mid-ocean ridge magmas (MORB Group Cr-spinel). Arc Group Cr-spinels are systematically enriched in Sc, Co and Mn and depleted in Ni compared to the MORB Group Cr-spinels. Intraplate Group Cr-spinels are distinguished from the Arc Group Cr-spinels by their high Ni contents. Both the Arc and Intraplate Group Cr-spinels have total Rh and IPGE contents of 22-689 ppb whereas the MORB Group Cr-spinels are depleted in Rh and IPGE (total time-resolved spectra of LA-ICP-MS data for Cr-spinels mostly show constant count rates for trace element and Rh and IPGEs, suggesting homogeneous distribution of these elements in Cr-spinels. The PGE spikes observed in several Cr-spinels were interpreted to be PGE-bearing mineral inclusions and excluded from calculating the PGE contents of the Cr-spinels. On primitive mantle normalized diagrams the Arc Group Cr-spinels are characterized by a fractionated

  2. Instrumental neutron activation analysis of a nickel sulfide fire assay button to determine the platinum group elements and gold

    Energy Technology Data Exchange (ETDEWEB)

    Asif, M.; Parry, S.J.; Malik, H. (Imperial College of Science, Technology and Medicine, Silwood Park, Ascot (United Kingdom). Centre for Analytical Research in the Environment)

    1992-08-01

    Platinum group elements and gold were determined in reference materials SARM 7 and MA 1b using fire assay with 0.5 g of nickel prior to neutron activation analysis. The method is simple and rapid, avoiding the dissolution step where losses occur, particularly of gold. The problem of standardizing the button mass was overcome by using a spiking technique. The method is best suited to samples with little or no copper, when the detection limits can be as low as 0.002, 0.025, 0.018, 0.0002, 0.002, 0.020 and 0.2 mg kg[sup -1] for Rh, Pd, Pt, Ir, Au, Os and Ru, respectively. (author).

  3. Fibrous Platinum-Group Minerals in “Floating Chromitites” from the Loma Larga Ni-Laterite Deposit, Dominican Republic

    Directory of Open Access Journals (Sweden)

    Thomas Aiglsperger

    2016-11-01

    Full Text Available This contribution reports on the observation of enigmatic fibrous platinum-group minerals (PGM found within a chromitite body included in limonite (“floating chromitite” from Ni-laterites in the Dominican Republic. Fibrous PGM have a Ru-Os-Ir-Fe dominated composition and are characterized by fibrous textures explained by grain-forming fibers which are significantly longer (1–5 µm than they are wide (~100 nm. Back-scattered electron (BSE images suggest that these nanofibers are platinum-group elements (PGE-bearing and form <5 µm thick layers of bundles which are oriented orthogonal to grains’ surfaces. Trace amounts of Si are most likely associated with PGE-bearing nanofibers. One characteristic fibrous PGM was studied in detail: XRD analyses point to ruthenian hexaferrum. However, the unpolished fibrous PGM shows numerous complex textures on its surface which are suggestive for neoformation processes: (i features suggesting growth of PGE-bearing nanofibers; (ii occurrence of PGM nanoparticles within film material (biofilm? associated with PGE-bearing nanofibers; (iii a Si-rich and crater-like texture hosting PGM nanoparticles and an Ir-rich accumulation of irregular shape; (iv complex PGM nanoparticles with ragged morphologies, resembling sponge spicules and (v oval forms (<1 µm in diameter with included PGM nanoparticles, similar to those observed in experiments with PGE-reducing bacteria. Fibrous PGM found in the limonite may have formed due to supergene (bio-weathering of fibrous Mg-silicates which were incorporated into desulphurized laurite during stages of serpentinization.

  4. Platinum-group elements in southern Africa: mineral inventory and an assessment of undiscovered mineral resources: Chapter Q in Global mineral resource assessment

    Science.gov (United States)

    Zientek, Michael L.; Causey, J. Douglas; Parks, Heather L.; Miller, Robert J.

    2014-01-01

    The platinum-group elements, platinum, palladium, rhodium, ruthenium, iridium, and osmium, possess unique physical and chemical characteristics that make them indispensable to modern technology and industry. However, mineral deposits that are the main sources of these elements occur only in three countries in the world, raising concerns about potential disruption in mineral supply. Using information in the public domain, mineral resource and reserve information has been compiled for mafic and ultramafic rocks in South Africa and Zimbabwe that host most of the world’s platinum-group element resources.

  5. Platinum Group Thiophenoxyimine Complexes: Syntheses,Crystallographic and Computational Studies of Structural Properties

    Energy Technology Data Exchange (ETDEWEB)

    Krinsky, Jamin L.; Arnold, John; Bergman, Robert G.

    2006-10-03

    Monomeric thiosalicylaldiminate complexes of rhodium(I) and iridium(I) were prepared by ligand transfer from the homoleptic zinc(II) species. In the presence of strongly donating ligands, the iridium complexes undergo insertion of the metal into the imine carbon-hydrogen bond. Thiophenoxyketimines were prepared by non-templated reaction of o-mercaptoacetophenone with anilines, and were complexed with rhodium(I), iridium(I), nickel(II) and platinum(II). X-ray crystallographic studies showed that while the thiosalicylaldiminate complexes display planar ligand conformations, those of the thiophenoxyketiminates are strongly distorted. Results of a computational study were consistent with a steric-strain interpretation of the difference in preferred ligand geometries.

  6. Platinum-Group Minerals and Other Accessory Phases in Chromite Deposits of the Alapaevsk Ophiolite, Central Urals, Russia

    Directory of Open Access Journals (Sweden)

    Federica Zaccarini

    2016-10-01

    Full Text Available An electron microprobe study has been carried out on platinum-group minerals, accessory phases, and chromite in several chromite deposits of the Alapaevsk ophiolite (Central Urals, Russia namely the Bakanov Kluch, Kurmanovskoe, Lesnoe, 3-d Podyony Rudnik, Bol’shaya Kruglyshka, and Krest deposits. These deposits occur in partially to totally serpentinized peridotites. The microprobe data shows that the chromite composition varies from Cr-rich to Al-rich. Tiny platinum-group minerals (PGM, 1–10 µm in size, have been found in the chromitites. The most abundant PGM is laurite, accompanied by minor cuproiridsite and alloys in the system Os–Ir–Ru. A small grain (about 20 μm was found in the interstitial serpentine of the Bakanov Kluch chromitite, and its calculated stoichiometry corresponds to (Ni,Fe5P. Olivine, occurring in the silicate matrix or included in fresh chromite, has a mantle-compatible composition in terms of major and minor elements. Several inclusions of amphibole, Na-rich phlogopite, and clinopyroxene have been identified. The bimodal Cr–Al composition of chromite probably corresponds to a vertical distribution in the ophiolite sequence, implying formation of Cr-rich chromitites in the deep mantle, and Al-rich chromitites close to the Moho-transition zone, in a supra-subduction setting. The presence of abundant hydrous silicate inclusions, such as amphibole and phlogopite, suggests that the Alapaevsk chromitites crystallized as a result of the interaction between a melt enriched in fluids and peridotites. Laurite and cuproiridsite are considered to be magmatic in origin, i.e., entrapped as solid phases during the crystallization of chromite at high temperatures. The sulfur fugacity was relatively high to allow the precipitation of Ir-bearing sulfides, but below the Os–OsS2 buffer. The alloys in the system Os–Ir–Ru are classified as secondary PGM, i.e., formed at low temperature during the serpentinization process. The

  7. Recovery of platinum-group metals (PGMS from spent automotive catalysts: Part II: Automotive catalysts: Structures and principle of operation

    Directory of Open Access Journals (Sweden)

    Dimitrijević Mile D.

    2015-01-01

    Full Text Available Catalytic converters are incorporated into motor vehicle emission systems (passenger cars, trucks and other motor vehicles, as well as civil and agricultural machines, as of lately to reduce air pollution as well as to meet the emission standards. Their purpose is to convert toxic emissions generated by combustion of liquid fossil fuels into less harmful products. In catalytic converters, rhodium is used for the reduction of gasses, whereas platinum and palladium are used for the oxidation of gasses. This paper presents the structure and operating principle of automotive catalysts in view of the fact that cars are the most prevalent motor vehicles worldwide and due to the fact that the production of cars with gasoline and diesel engines will dominate until at least 2020.

  8. Platinum group element enrichments and possible chondritic Ru:Ir across the Frasnian-Famennian boundary, western New York State.

    Science.gov (United States)

    Over, D J; Conaway, C A; Katz, D J; Goodfellow, W D; Gregoire, D C

    1997-08-01

    The Frasnian-Famennian boundary is recognized as the culmination of a global mass extinction in the Late Devonian. In western New York State the boundary is a distinct horizon within a pyritic black shale bed of the upper Hanover Shale defined by the first occurrence of Palmatolepis triangularis in the absence of Frasnian conodonts. The boundary is characterized by a minor disconformity marked by a lag concentration of conodonts. Iridium at the boundary is 0.11-0.24 ng/g, two to five times background levels of <0.05 ng/g; other Ir enrichments of 0.38 ng/g and 0.49 ng/g occur within 50 cm of the conodont-constrained boundary. Numerous Ir enrichments in the boundary interval suggest extraterrestrial accretion and platinum group element (PGE) concentration at disconformities, or mobilization and concentration in organic-rich/pyritic-rich laminations from cosmic or terrestrial sources. PGE ratios of Pt/Pd and Ku/Ir at the boundary horizon approximate chondritic ratios and are suggestive of an unaltered extraterrestrial source. These values do not conclusively establish a single extraterrestrial impact as the ultimate cause of the Frasnian-Famennian mass extinction, especially given the presence of similar Ir enrichments elsewhere in the section and the absence at the boundary of microtektites and shocked mineral grains.

  9. Reliability assessment of MVP-BURN and JENDL-4.0 related to nuclear transmutation of light platinum group elements

    Directory of Open Access Journals (Sweden)

    Terashima Atsunori

    2017-01-01

    Full Text Available The Aprés ORIENT research program, as a concept of advanced nuclear fuel cycle, was initiated in FY2011 aiming at creating stable, highly-valuable elements by nuclear transmutation from ↓ssion products. In order to simulate creation of such elements by (n, γ reaction succeeded by β− decay in reactors, a continuous-energy Monte Carlo burnup calculation code MVP-BURN was employed. Then, it is one of the most important tasks to con↓rm the reliability of MVP-BURN code and evaluated neutron cross section library. In this study, both an experiment of neutron activation analysis in TRIGA Mark I reactor at University of California, Irvine and the corresponding burnup calculation using MVP-BURN code were performed for validation of the simulation on transmutation of light platinum group elements. Especially, some neutron capture reactions such as 102Ru(n, γ103Ru, 104Ru(n, γ105Ru, and 108Pd(n, γ109Pd were dealt with in this study. From a comparison between the calculation (C and the experiment (E about 102Ru(n, γ103Ru, the deviation (C/E-1 was signi↓cantly large. Then, it is strongly suspected that not MVP-BURN code but the neutron capture cross section of 102Ru belonging to JENDL-4.0 used in this simulation have made the big di↑erence as (C/E-1 >20%.

  10. Reliability assessment of MVP-BURN and JENDL-4.0 related to nuclear transmutation of light platinum group elements

    Science.gov (United States)

    Terashima, Atsunori; Nilsson, Mikael; Ozawa, Masaki; Chiba, Satoshi

    2017-09-01

    The Aprés ORIENT research program, as a concept of advanced nuclear fuel cycle, was initiated in FY2011 aiming at creating stable, highly-valuable elements by nuclear transmutation from ↓ssion products. In order to simulate creation of such elements by (n, γ) reaction succeeded by β- decay in reactors, a continuous-energy Monte Carlo burnup calculation code MVP-BURN was employed. Then, it is one of the most important tasks to con↓rm the reliability of MVP-BURN code and evaluated neutron cross section library. In this study, both an experiment of neutron activation analysis in TRIGA Mark I reactor at University of California, Irvine and the corresponding burnup calculation using MVP-BURN code were performed for validation of the simulation on transmutation of light platinum group elements. Especially, some neutron capture reactions such as 102Ru(n, γ)103Ru, 104Ru(n, γ)105Ru, and 108Pd(n, γ)109Pd were dealt with in this study. From a comparison between the calculation (C) and the experiment (E) about 102Ru(n, γ)103Ru, the deviation (C/E-1) was signi↓cantly large. Then, it is strongly suspected that not MVP-BURN code but the neutron capture cross section of 102Ru belonging to JENDL-4.0 used in this simulation have made the big di↑erence as (C/E-1) >20%.

  11. Inter-annual trends of heavy metals in marine resources from the ...

    African Journals Online (AJOL)

    USER

    In an attempt to monitor and assess the pollution status of marine resources in the Nigerian territorial waters, this study was carried out to reveal the levels and inter-annual trend of heavy metals in marine resources from the Lagos lagoon marine ecosystem. Studies were carried out annually in the month of. July between ...

  12. Platinum Group Elements (PGE) geochemistry of komatiites and boninites from Dharwar Craton, India: Implications for mantle melting processes

    Science.gov (United States)

    Saha, Abhishek; Manikyamba, C.; Santosh, M.; Ganguly, Sohini; Khelen, Arubam C.; Subramanyam, K. S. V.

    2015-06-01

    High MgO volcanic rocks having elevated concentrations of Ni and Cr are potential hosts for platinum group elements (PGE) owing to their primitive mantle origin and eruption at high temperatures. Though their higher PGE abundance is economically significant in mineral exploration studies, their lower concentrations are also valuable geochemical tools to evaluate petrogenetic processes. In this paper an attempt has been made to evaluate the PGE geochemistry of high MgO volcanic rocks from two greenstone belts of western and eastern Dharwar Craton and to discuss different mantle processes operative at diverse geodynamic settings during the Neoarchean time. The Bababudan greenstone belt of western and Gadwal greenstone belt of eastern Dharwar Cratons are dominantly composed of high MgO volcanic rocks which, based on distinct geochemical characteristics, have been identified as komatiites and boninites respectively. The Bababudan komatiites are essentially composed of olivine and clinopyroxene with rare plagioclase tending towards komatiitic basalts. The Gadwal boninites contain clinopyroxene, recrystallized hornblende with minor orthopyroxene, plagioclase and sulphide minerals. The Bababudan komatiites are Al-undepleted type (Al2O3/TiO2 = 23-59) with distinctly high MgO (27.4-35.8 wt.%), Ni (509-1066 ppm) and Cr (136-3036 ppm) contents. These rocks have low ΣPGE (9-42 ppb) contents with 0.2-2.4 ppb Iridium (Ir), 0.2-1.4 ppb Osmium (Os) and 0.4-4.4 ppb Ruthenium (Ru) among Iridium group PGE (IPGE); and 1.4-16.2 ppb Platinum (Pt), 2.8-19 ppb Palladium (Pd) and 0.2-9.8 ppb Rhodium (Rh) among Platinum group PGE (PPGE). The Gadwal boninites are high-Ca boninites with CaO/Al2O3 ratios varying between 0.8 and 1.0, with 12-24 wt.% MgO, 821-1168 ppm Ni and 2307-2765 ppm Cr. They show higher concentration of total PGE (82-207 ppb) with Pt concentration ranging from 13 to 19 ppb, Pd between 65 and 180 ppb and Rh in the range of 1.4-3 ppb compared to the Bababudan komatiites. Ir

  13. Re-Os isotope and platinum group elements of a FOcal ZOne mantle source, Louisville Seamounts Chain, Pacific ocean

    Science.gov (United States)

    Tejada, Maria Luisa G.; Hanyu, Takeshi; Ishikawa, Akira; Senda, Ryoko; Suzuki, Katsuhiko; Fitton, Godfrey; Williams, Rebecca

    2015-02-01

    The Louisville Seamount Chain (LSC) is, besides the Hawaiian-Emperor Chain, one of the longest-lived hotspot traces. We report here the first Re-Os isotope and platinum group element (PGE) data for Canopus, Rigil, and Burton Guyots along the chain, which were drilled during IODP Expedition 330. The LSC basalts possess (187Os/188Os)i = 0.1245-0.1314 that are remarkably homogeneous and do not vary with age. A Re-Os isochron age of 64.9 ± 3.2 Ma was obtained for Burton seamount (the youngest of the three seamounts drilled), consistent with 40Ar-39Ar data. Isochron-derived initial 187Os/188Os ratio of 0.1272 ± 0.0008, together with data for olivines (0.1271-0.1275), are within the estimated primitive mantle values. This (187Os/188Os)i range is similar to those of Rarotonga (0.124-0.139) and Samoan shield (0.1276-0.1313) basalts and lower than those of Cook-Austral (0.136-0.155) and Hawaiian shield (0.1283-0.1578) basalts, suggesting little or no recycled component in the LSC mantle source. The PGE data of LSC basalts are distinct from those of oceanic lower crust. Variation in PGE patterns can be largely explained by different low degrees of melting under sulfide-saturated conditions of the same relatively fertile mantle source, consistent with their primitive mantle-like Os and primordial Ne isotope signatures. The PGE patterns and the low 187Os/188Os composition of LSC basalts contrast with those of Ontong Java Plateau (OJP) tholeiites. We conclude that the Re-Os isotope and PGE composition of LSC basalts reflect a relatively pure deep-sourced common mantle sampled by some ocean island basalts but is not discernible in the composition of OJP tholeiites.

  14. Levels of platinum group elements and rare-earth elements in wild mushroom species growing in Poland.

    Science.gov (United States)

    Mleczek, Mirosław; Niedzielski, Przemysław; Kalač, Pavel; Siwulski, Marek; Rzymski, Piotr; Gąsecka, Monika

    2016-01-01

    Due to limited data-describing abilities of mushrooms to accumulate platinum group elements (PGEs) and rare-earth elements (REEs), the aim of this study was to determine, by inductively coupled plasma optical emission spectrometry followed by microwave-assisted sample digestion by nitric acid, the content of these elements in 20 mushroom species (10 above ground and 10 growing on wood), mostly edible, collected near a busy trunk road. The highest content of PGEs in above-ground mushroom species was observed in Lepista gilva and Suillus bovinus fruit bodies (0.38 ± 0.05 and 0.37 ± 0.03 mg kg(-1) DW, respectively), while in mushrooms growing on wood, the highest content was observed in Pleurotus ostreatus (0.35 ± 0.04 mg kg(-1) DW). The mean content of PGEs for both these groups was 0.23 ± 0.08 and 0.26 ± 0.07 mg kg(-1) DW, respectively. The highest content of REEs in Suillus luteus and Tricholoma equestra was 5.03 ± 0.50 and 2.18 ± 0.56 mg kg(-1) DW, respectively, but within mushrooms growing on wood in Ganoderma applanatum fruiting bodies it was 4.19 ± 0.78 mg kg(-1) DW. Mean contents of REEs were 1.39 ± 1.21 and 1.61 ± 0.97 mg kg(-1) DW in above-ground species and species growing on wood, respectively. Generally, the group of mushroom species growing on wood was capable of slightly higher accumulation of both REEs and PGEs. No limits have been established for both the groups until now.

  15. Determination of the platinum - group elements (PGE) and gold (Au) in the manganese nodule reference samples by nickel sulfide fire-assay and Te coprecipitation with ICP-MS

    Digital Repository Service at National Institute of Oceanography (India)

    Balaram, V.; Mathur, R.; Banakar, V.K.; Hein, J.R.; Rao, C.R.M.; Rao, T.G.; Dasaram, B.

    Platinum group elements (PGE) and Au data in polymetallic oceanic ferromanganese nodule reference samples and crust samples obtained by inductively coupled plasma mass spectrometry (ICP-MS), after separation and pre-concentration by nickel sulfide...

  16. Fractionation of the platinum-group elments and Re during crystallization of basalt in Kilauea Iki Lava Lake, Hawaii

    Science.gov (United States)

    Pitcher, L.; Helz, R.T.; Walker, R.J.; Piccoli, P.

    2009-01-01

    Kilauea Iki lava lake formed during the 1959 summit eruption of Kilauea Volcano, then crystallized and differentiated over a period of 35??years. It offers an opportunity to evaluate the fractionation behavior of trace elements in a uniquely well-documented basaltic system. A suite of 14 core samples recovered from 1967 to 1981 has been analyzed for 5 platinum-group elements (PGE: Ir, Os, Ru, Pt, Pd), plus Re. These samples have MgO ranging from 2.4 to 26.9??wt.%, with temperatures prior to quench ranging from 1140????C to ambient (110????C). Five eruption samples were also analyzed. Osmium and Ru concentrations vary by nearly four orders of magnitude (0.0006-1.40??ppb for Os and 0.0006-2.01??ppb for Ru) and are positively correlated with MgO content. These elements behaved compatibly during crystallization, mostly likely being concentrated in trace phases (alloy or sulfide) present in olivine phenocrysts or included chromite. Iridium also correlates positively with MgO, although less strongly than Os and Ru. The somewhat poorer correlation for Ir, compared with Os and Ru, may reflect variable loss of Ir as volatile IrF6 in some of the most magnesian samples. Rhenium is negatively correlated with MgO, behaving as an incompatible trace element. Its behavior in the lava lake is complicated by apparent volatile loss of Re, as suggested by a decrease in Re concentration with time of quenching for lake samples vs. eruption samples. Platinum and Pd concentrations are negatively, albeit weakly, correlated with MgO, so these elements were modestly incompatible during crystallization of the major silicate phases. Palladium contents peaked before precipitation of immiscible sulfide liquid, however, and decline sharply in the most differentiated samples. In contrast, Pt appears to have been unaffected by sulfide precipitation. Microprobe data confirm that Pd entered the sulfide liquid before Re, and that Pt is not strongly chalcophile in this system. Occasional high Pt values

  17. Inter-annual trends of heavy metals in marine resources from the ...

    African Journals Online (AJOL)

    Inter-annual trends of heavy metals in marine resources from the Nigerian territorial waters. ... African Journal of Environmental Science and Technology ... Abstract. In an attempt to monitor and assess the pollution status of marine resources in the Nigerian territorial waters, this study was carried out to reveal the levels and ...

  18. Separation of palladium from high-level waste using metal ferro cyanide loaded resins

    International Nuclear Information System (INIS)

    Valsala, T.P.; Joseph, Annie; Yeotikar, R.G.

    2005-01-01

    High-level waste (HLW) is generated during reprocessing of spent fuel. HLW contains corrosion products, unextracted actinides, process chemicals and fission products. A recent trend is there to consider waste as a source of wealth. Among the fission products separation and recovery of platinum group metals have gained great attention. HLW is a good source of palladium of the platinum group metal. The present study shows the feasibility of ion exchange separation of Pd from HLW. (author)

  19. Platinum metals in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Zereini, Fathi [Frankfurt Univ. (Germany). Dept. of Environmental Analytical Chemistry; Wiseman, Clare L.S. (ed.) [Toronto Univ. (Canada). School of the Environment

    2015-03-01

    This book contains the five chapters with the following topics: 1. SOURCES OF PGE EMISSIONS ELEMENTS: Sources of Platinum Group Elements (PGE) in the Environment; Impact of Platinum Group Element Emissions from Mining and Production Activities. 2. ANALYTICAL METHODS FOR THE DETERMINATION OF PGE IN BIOLOGICAL AND ENVIRONMENTAL MATRICES: Appraisal of Biosorption for Recovery, Separation and Determination of Platinum, Palladium and Rhodium in Environmental Samples; On the Underestimated Factors Influencing the Accuracy of Determination of Pt and Pd by Electrothermal Atomic Absorption Spectrometry in Road Dust Samples; Application of Solid Sorbents for Enrichment and Separation of Platinum Metal Ions; Voltammetric Analysis of Platinum in Environmental Matrices; Speciation Analysis of Chloroplatinates; Analysis of Platinum Group Elements in Environmental Samples: A Review. 3. OCCURRENCE, CHEMICAL BEHAVIOR AND FATE OF PGE IN THE ENVIRONMENT: Brazilian PGE Research Data Survey on Urban and Roadside Soils; Platinum, Palladium and Rhodium in a Bavarian Roadside Soil; Increase of Platinum Group Element Concentrations in Soils and Airborne Dust During the Period of Vehicular Exhaust Catalysts Introduction; Platinum-Group Elements in Urban Fluvial Bed Sediments-Hawaii; Long-Term Monitoring of Palladium and Platinum Contents in Road Dust of the City of Munich, Germany; Characterization of PGEs and Other Elements in Road Dusts and Airborne Particles in Houston, Texas; Accumulation and Distribution of Pt and Pd in Roadside Dust, Soil and Vegetation in Bulgaria; Increase of the Environmental Pt Concentration in the Metropolitan Area of Mexico City Associated to the Use of Automobile Catalytic Converters; Solubility of Emitted Platinum Group Elements (Pt, Pd and Rh) in Airborne Particulate Matter (PM10) in the Presence of Organic Complexing Agents; The Influence of Anionic Species (Cl{sup -}, NO{sub 3}{sup -}, SO{sub 4}{sup 2-}) on the Transformation and Solubility of Platinum in

  20. Biohydrometallurgical methods for metals recovery from waste materials

    OpenAIRE

    J. Willner; J. Kadukova; A. Fornalczyk; M. Saternus

    2015-01-01

    The article draws attention to recently conducted research of bacterial leaching of metals from various polymetallic waste. These wastes are the carriers of valuable metals: base metals, precious and platinum group metals (e.g. electronic waste, spent catalysts) or rare earth elements.

  1. Biohydrometallurgical methods for metals recovery from waste materials

    Directory of Open Access Journals (Sweden)

    J. Willner

    2015-01-01

    Full Text Available The article draws attention to recently conducted research of bacterial leaching of metals from various polymetallic waste. These wastes are the carriers of valuable metals: base metals, precious and platinum group metals (e.g. electronic waste, spent catalysts or rare earth elements.

  2. Annual report 1984

    International Nuclear Information System (INIS)

    1985-01-01

    Various research programs at Mintek are discussed, including the following: Carbon-in-pulp processes; carbon-in-solution processes; resin-in-pulp processes; leaching of gold and uranium, refractory gold; milling; recovery of pyrite; ferroalloys; research programs on iron, steel, stainless steel, copper, nickel, cobalt, zinc, lead, platinum group metals, phosphate and fluorospar. Rare earth metals, antimony, tin, chromium, aluminium and manganese are also dealt with. The abrasive wear and corrosive wear of alloys are discussed. There is also a section on general research, including mineralogy, chemical analysis, ore-dressing

  3. Investigations on the bioavailability of traffic-related platinum group elements (PGE) to the aquatic fauna with special consideration being given to palladium; Untersuchungen zur Bioverfuegbarkeit Kfz-emittierter Platingruppenelemente (PGE) fuer die aquatische Fauna unter besonderer Beruecksichtigung von Palladium

    Energy Technology Data Exchange (ETDEWEB)

    Sures, B.; Thielen, F.; Zimmermann, S. [Karlsruhe Univ. (T.H.) (Germany). Zoologisches Inst.

    2002-07-01

    The uptake and accumulation of the traffic-related platinum group elements (PGE) Pt, Pd and Rh by the aquatic fauna was investigated. Zebra mussels, eels and barbels were maintained in water containing either road dust or ground catalytic converter material. Following the exposure, samples of fish liver and kidney, as well as the soft tissues of the mussels, were analysed. Our results revealed that all three catalytic noble metals were accumulated by aquatic organisms. The highest bioavailability was found for Pd, followed by Pt and Rh. The concentration factor of Pd for Dreissena polymorpha was 5 times higher compared with Pb and only 6 times lower than the essential element Cu. With regard to the increasing emission of Pd the level of this metal has to be monitored very carefully in the environment. (orig.) [German] Die Aufnahme und Anreicherung der Kfz-buertigen Platingruppenelemente (PGE) Pt, Pd und Rh durch aquatische Tiere wurde an Dreikantmuscheln, Aalen und Barben untersucht. Hierzu wurden die Testorganismen in Wasser mit Strassenstaub einer stark befahrenen Strasse oder mit zerriebenem Autokatalysatormaterial ueber mehrere Wochen exponiert und anschliessend Leber und Niere der Fische sowie das Weichgewebe der Muscheln analysiert. Im Rahmen dieser Studien konnte nachgewiesen werden, dass alle drei Edelmetalle durch Fische wie durch Muscheln aufgenommen und angereichert werden. Fuer Pd fand sich die hoechste Bioverfuegbarkeit, gefolgt von Pt und Rh. Das Ausmass der Aufnahme von Pd durch Dreissena polymorpha war ca. 5fach hoeher als von Pb und 6fach niedriger verglichen mit dem essenziellen Element Cu. In Anbetracht der steigenden Emission von Pd sollte ein Umweltmonitoring die Verbreitung von Pd in der Umwelt klaeren. (orig.)

  4. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, S.; Plimer, I. R. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1996-12-31

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs.

  5. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    International Nuclear Information System (INIS)

    Reeves, S.; Plimer, I. R.

    1996-01-01

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs

  6. The platinum group elements and gold: analysis by radiochemical and instrumental neutron activation analysis and relevance to geological exploration and related problems

    Energy Technology Data Exchange (ETDEWEB)

    Reeves, S; Plimer, I R [Melbourne Univ., Parkville, VIC (Australia). School of Physics

    1997-12-31

    This paper presents an overview of research conducted with the support of the Australian Institute of Nuclear Science and Engineering, at the University of Melbourne, School of Earth Sciences, Radiochemical Neutron Activation Laboratory. The primary objective of this research is to realize the high potential of the platinum group elements (PGE) and gold to the solution of petrogenetic problems, the study of magma generation and magmatic processes in mafic/ultramafic rock suites, as tracers in hydrothermal ore formation. The PGEs (Os, Ru, Ir, Pt, Pd and Rh) are among the least abundant of all elements on earth with unique properties such as high melting points, high electrical and thermal conductivity, high density, strength and toughness as alloys. They exhibit both siderophile and chalcophile characteristics and are valuable tools in providing information about magmatic processes, in particular S-saturation, as well as crystal fractionation trends. Two distinct groups of PGEs are discerned; the IPGEs (Ru, Os, Ir) and the PPGEs (Pt, Pd, Rh, Au) on the basis of their behaviour during fractionation processes. Using chondrite normalized PGE patterns it is possible to distinguish between sulphides that segregated from primitive magmas, such as komatiites, and sulphides which segregated from more fractionated magmas, such as tholeiites. It is critical to the understanding of these processes to be able to analyse key elements, such as the PGE and gold, in the parts per billion to parts per trillion range. Platinum group elements and Au were determined by radiochemical neutron activation analysis using a modified NiS fire-assay preconcentration technique, adapted from procedures first used by Robert, R.V. D. and van Wyk, E. (1975) . Detection limits are generally 0.005-0.01 ppb (Au and Ir), 0.1-0.2 ppb (Pd and Pt), and 0.1-0.5 ppb for Ru. 9 refs.

  7. Simultaneous determination of platinum group elements and rhenium in rock samples using isotope dilution inductively coupled plasma mass spectrometry after cation exchange separation followed by solvent extraction

    International Nuclear Information System (INIS)

    Shinotsuka, Kazunori; Suzuki, Katsuhiko

    2007-01-01

    A simple and precise determination method for platinum group elements (PGEs) and Re in rock samples was developed using isotope dilution coupled with inductively coupled plasma mass spectrometry (ID-ICP-MS). Cation exchange separation was employed for simplicity, because it is applicable to group separation and simultaneous isotopic measurement in contrast with the widely used anion exchange separation which entails separate elution. However, its application to ID-ICP-MS has been limited due to spectral interferences from impurities retained in the PGE fraction even after ion chromatography. To overcome this limitation, solvent extraction using N-benzoyl-N-phenylhydroxylamine (BPHA) in chloroform was successfully applied for further purification. After the examination of optimum experimental parameters in cation exchange separation and solvent extraction using synthetic PGE solution, the established procedure was applied to the determination of PGEs and Re in some geochemical reference materials. The obtained results agreed well with the literature data determined using the different digestion methods (NiS fire assay and the use of a high-pressure asher) within the analytical uncertainties of each other. Significant difference in reproducibility between Ru, Ir, Pt and Os group, and Pd and Re group was observed in the results for BHVO-2 and JA-2. By considering the error factors affecting analytical reproducibility, we concluded that the difference is ascribed to the sample heterogeneity of minor minerals enriched in Ru, Ir, Pt and Os

  8. A feasibility study of perennial/annual plant species to restore soils contaminated with heavy metals

    Science.gov (United States)

    Zacarías, Montserrat; Beltrán, Margarita; Gilberto Torres, Luis; González, Abelardo

    A feasibility study was carried out to evaluate the application of perennial/annual plant species in a phytoextraction process of a previously washed industrial urban soil contaminated by nickel, arsenic and cupper. The plant species selected for this study were Ipomea (Ipomea variada); grass (Poa pratensis); grass mixture (Festuca rubra, Cynodon dactylon, Lolium multiforum, Pennisetum sp.); Monks Cress (Tropaeolum majus); ficus (Ficus benajamina) and fern (Pteris cretica). Soil was characterized and it presented the following heavy metals concentrations (dry weight): 80 mg of Ni/kg, 456-656 mg of As/kg and 1684-3166 mg of Cu/kg. Germination and survival in contaminated soil tests were conducted, from these, P. pratensis was discarded and the rest of plant species tested were used for the phytoextraction selection test. After 4 months of growth, biomass production was determined, and content of Ni, As and Cu was analyzed in plant’s tissue. Metal biological absorption coefficient (BAC), bio-concentration factor (BCF) and translocation factor (TF), were calculated. Regarding to biomass generation it was observed, in every case, an inhibition of the plant growth compared with blanks sown in a non contaminated soil; inhibition ranged from 22.5% for the Monk cress to 98% for Ipomea. Even though the later presented high BAC, BCF and TF, its growth was severely inhibited, and therefore, due its low biomass generation, it is not recommended for phytoextraction under conditions for this study. Heavy metals concentrations in plant’s tissue (dry weight) were as high as 866 mg Cu/kg and 602 mg As/kg for grass mixture; and 825 mg As/kg was observed for Monks cress. Grass mixture and monks cress had high BAC, BCF and TF, also they had high metal concentrations in its plants tissues and the lowest growth inhibition rates; hence the application in phytoextraction processes of these plants is advisable.

  9. Platinum-group element geochemistry used to determine Cu and Au fertility in the Northparkes igneous suites, New South Wales, Australia

    Science.gov (United States)

    Hao, Hongda; Campbell, Ian H.; Park, Jung-Woo; Cooke, David R.

    2017-11-01

    Recent studies have shown that platinum-group elements (PGE) can be used to constrain the timing of sulfide saturation in evolving felsic systems. In this study, we report trace-element, PGE, Re and Au data for the barren and ore-associated suites of intermediate to felsic rocks from the Northparkes Cu-Au porphyry region, emphasizing the timing of sulfide saturation and its influence on the tenor of the associated hydrothermal mineralization. Two barren suites, the Goonumbla and Wombin Volcanics and associate intrusive rocks, are found in the region. Geochemical modelling shows that the barren suites are dominated by plagioclase-pyroxene fractionation, whereas the ore-associated Northparkes Cu-Au porphyry suite is characterized by plagioclase-amphibole fractionation, which requires the ore-bearing suite to have crystallized from a wetter magma than barren suites. The concentrations of PGE, Re and Au in the barren suites decrease continuously during fractional crystallization. This is attributed to early sulfide saturation with the fraction of immiscible sulfide precipitation required to produce the observed trend, being 0.13 and 0.16 wt.% for the Goonumbla and Wombin suites, respectively. The calculated partition coefficients for Au and Pd required to model the observed change in these elements with MgO are well below published values, indicating that R, the mass ratio of silicate to sulfide melt, played a significant role in controlling the rate of decline of these elements with fractionation. Palladium in the ore-associated suite, in contrast, first increases with fractionation then decreases abruptly at 1.2 wt.% MgO. The sharp decrease is attributed to the onset of sulfide precipitation. Platinum on the other hand shows a moderate decrease, starting from the highest MgO sample analysed, but then decreasing strongly from 1.2 wt.% MgO. The initial Pt decrease is attributed to precipitation of a platinum-group mineral (PGM), probably a Pt-Fe alloy, and the sharp

  10. Life cycle assessment of metals: a scientific synthesis.

    Directory of Open Access Journals (Sweden)

    Philip Nuss

    Full Text Available We have assembled extensive information on the cradle-to-gate environmental burdens of 63 metals in their major use forms, and illustrated the interconnectedness of metal production systems. Related cumulative energy use, global warming potential, human health implications and ecosystem damage are estimated by metal life cycle stage (i.e., mining, purification, and refining. For some elements, these are the first life cycle estimates of environmental impacts reported in the literature. We show that, if compared on a per kilogram basis, the platinum group metals and gold display the highest environmental burdens, while many of the major industrial metals (e.g., iron, manganese, titanium are found at the lower end of the environmental impacts scale. If compared on the basis of their global annual production in 2008, iron and aluminum display the largest impacts, and thallium and tellurium the lowest. With the exception of a few metals, environmental impacts of the majority of elements are dominated by the purification and refining stages in which metals are transformed from a concentrate into their metallic form. Out of the 63 metals investigated, 42 metals are obtained as co-products in multi output processes. We test the sensitivity of varying allocation rationales, in which the environmental burden are allocated to the various metal and mineral products, on the overall results. Monte-Carlo simulation is applied to further investigate the stability of our results. This analysis is the most comprehensive life cycle comparison of metals to date and allows for the first time a complete bottom-up estimate of life cycle impacts of the metals and mining sector globally. We estimate global direct and indirect greenhouse gas emissions in 2008 at 3.4 Gt CO2-eq per year and primary energy use at 49 EJ per year (9.5% of global use, and report the shares for all metals to both impact categories.

  11. Direct determination of platinum group elements and their distributions in geological and environmental samples at the ng g{sup -1} level using LA-ICP-IDMS

    Energy Technology Data Exchange (ETDEWEB)

    Boulyga, Sergei F.; Heumann, Klaus G. [Johannes Gutenberg-University Mainz, Institute of Inorganic Chemistry and Analytical Chemistry, Mainz (Germany)

    2005-10-01

    Laser ablation inductively coupled plasma isotope dilution mass spectrometry (LA-ICP-IDMS) was applied to the direct and simultaneous determination of the platinum group elements (PGEs) Pt, Pd, Ru, and Ir in geological and environmental samples. A special laser ablation system with high ablation rates was used, along with sector field ICP-MS. Special attention was paid to deriving the distributions of PGEs in the pulverized samples. IDMS could not be applied to the (mono-isotopic) Rh, but the similar ablation behavior of Ru and Rh allowed Rh to be simultaneously determined via relative sensitivity coefficients. The laser ablation process produces hardly any oxide ions (which usually cause interference in PGE analysis with liquid sample injection), so the ICP-MS can be run in its low mass resolution but high-sensitivity mode. The detection limits obtained for the geological samples were 0.16 ng g{sup -1}, 0.14 ng g{sup -1}, 0.08 ng g{sup -1}, 0.01 ng g{sup -1} and 0.06 ng g{sup -1} for Ru, Rh, Pd, Ir and Pt, respectively. LA-ICP-IDMS was applied to different geological reference materials (TDB-1, WGB-1, UMT-1, WMG-1, SARM-7) and the road dust reference material BCR-723, which are only certified for some of the PGEs. Comparisons with certified values as well as with indicative values from the literature demonstrated the validity of the LA-ICP-IDMS method. The PGE concentrations in subsamples of the road dust reference material correspond to a normal distribution, whereas the distributions in the geological reference materials TDB-1, WGB-1, UMT-1, WMG-1, and SARM-7 are more complex. For example, in the case of Ru, a logarithmic normal distribution best fits the analyzed concentrations in TDB-1 subsamples, whereas a pronounced nugget effect was found for Pt in most geological samples. (orig.)

  12. Direct determination of platinum group elements and their distributions in geological and environmental samples at the ng g(-1) level using LA-ICP-IDMS.

    Science.gov (United States)

    Boulyga, Sergei F; Heumann, Klaus G

    2005-10-01

    Laser ablation inductively coupled plasma isotope dilution mass spectrometry (LA-ICP-IDMS) was applied to the direct and simultaneous determination of the platinum group elements (PGEs) Pt, Pd, Ru, and Ir in geological and environmental samples. A special laser ablation system with high ablation rates was used, along with sector field ICP-MS. Special attention was paid to deriving the distributions of PGEs in the pulverized samples. IDMS could not be applied to the (mono-isotopic) Rh, but the similar ablation behavior of Ru and Rh allowed Rh to be simultaneously determined via relative sensitivity coefficients. The laser ablation process produces hardly any oxide ions (which usually cause interference in PGE analysis with liquid sample injection), so the ICP-MS can be run in its low mass resolution but high-sensitivity mode. The detection limits obtained for the geological samples were 0.16 ng g(-1), 0.14 ng g(-1), 0.08 ng g(-1), 0.01 ng g(-1) and 0.06 ng g(-1) for Ru, Rh, Pd, Ir and Pt, respectively. LA-ICP-IDMS was applied to different geological reference materials (TDB-1, WGB-1, UMT-1, WMG-1, SARM-7) and the road dust reference material BCR-723, which are only certified for some of the PGEs. Comparisons with certified values as well as with indicative values from the literature demonstrated the validity of the LA-ICP-IDMS method. The PGE concentrations in subsamples of the road dust reference material correspond to a normal distribution, whereas the distributions in the geological reference materials TDB-1, WGB-1, UMT-1, WMG-1, and SARM-7 are more complex. For example, in the case of Ru, a logarithmic normal distribution best fits the analyzed concentrations in TDB-1 subsamples, whereas a pronounced nugget effect was found for Pt in most geological samples.

  13. Komatiites and nickel sulfide ores of the Black Swan area, Yilgarn Craton, Western Australia. 4. Platinum group element distribution in the ores, and genetic implications

    Science.gov (United States)

    Barnes, Stephen J.

    2004-11-01

    The Black Swan komatiite sequence, in the Eastern Goldfields province of the Archaean Yilgarn Craton in Western Australia, is a body of dominantly olivine-rich cumulates with lesser volumes of spinifex textured rocks, interpreted as a section through an extensive komatiite lava flow field. The sequence hosts a number of nickel sulfide orebodies, including the Silver Swan massive shoot and the Cygnet and Black Swan disseminated orebodies. The massive sulfide orebodies of the Black Swan Succession are pervasively depleted in all platinum group elements (PGEs), particularly Pt and Pd, despite very high Ni contents. This depletion cannot be explained by R-factor variations, which would also require relatively low Ni tenors. The PGE depletion could be explained in part if the ores are enriched in a monosulfide solid solution (MSS) cumulate component, but requires some additional fractional segregation of sulfide melt upstream from the site of deposition. The Silver Swan orebody shows a remarkably consistent vertical zonation in PGE contents, particularly in Ir, Ru, Rh, Os, which increase systematically from very low levels at the stratigraphic base of the sulfide body to maxima corresponding roughly with the top of a lower layer of the orebody rich in silicate inclusions. Platinum shows the opposite trend, but is somewhat modified by remobilisation during talc carbonate alteration. A similar pattern is also observed in the adjacent White Swan orebody. This zonation is interpreted and modelled as the result of fractional crystallisation of MSS from the molten sulfide pool. The strong IPGE depletion towards the base of the orebody may be a consequence of sulfide liquid crystallisation in an inverted thermal gradient, between a thin rapidly cooling upper rind of komatiite lava and a hot substrate.

  14. Variation of rock-forming metals in sub-annual increments of modern Greenland snow

    Science.gov (United States)

    Hinkley, T.K.

    1992-01-01

    Modern snowpack from central south Greenland was sampled in sub-seasonal increments and analysed for a suite of major, minor and trace rock-forming metals (K, Rb, Cs, Ca, Sr, Ba). There is a sharp seasonal concentration maximum for all six metals that comes in summer, later than mid-June. Metal concentrations in all other parts of the year's snowpack are up to 10 or more times smaller. The concentration maximum is preceded by low values in autumn-winter, very low values in early-mid-spring, and moderate-to-high values in late spring early summer; this pattern is seen consistently in three separate time stratigraphic intervals representing the same seasonal periods, spanning the time interval 1981-1984. The absolute concentration values of the snow strata representing the low-concentration portion of the year, autumn-winter-spring, may vary substantially from year to year, by a factor of two, or more. The finding that all rock-forming metals are at a sharp concentration maximum in late summer contrasts with the interpretations of several other studies in high-latitude northern regions. Those studies have reported a broad maximum of continental dust-associated metals in late winter and spring. However samples of the other studies have mostly come from regions farther to the north, and the analyses have emphasized industrial pollutant metals rather than the matched rock-forming suite of the present study. The metals measured were chosen to give information about the origin and identity of the rock and soil dusts, and sea salts, present as impurities in the snow. Metal ratios indicate that the dusts in the snowpacks are of continental origin and from ferromagnesian rocks. Source rock types for dusts in central south Greenland snow contrast with the felsic rock dusts of the Sierra Nevada, CA, annual snowpacks, and with the very felsic rock dusts in large south central Alaskan mountain glaciers. Samples in which masses of sea salt are much larger than those of rock dusts

  15. Concentrations of Platinum Group Elements (Pt, Pd, Rh) in Airborne Particulate Matter (PM2.5 and PM10-2.5) Collected at Selected Canadian Urban Sites: a Case Study

    OpenAIRE

    Celo V.; Zhao J. J.; Dabek-Zlotorzynska E.

    2013-01-01

    Increasing environmental concentrations of platinum group elements (PGEs), in particular platinum (Pt), palladium (Pd) and rhodium (Rh), from catalytic converters has been reported worldwide. Initially it was believed that the emitted PGEs remain in the roadside environment, but recent studies have shown that fine PGE-containing particles can be transported and distributed at regional and long-range levels. Therefore, the monitoring of PGEs in airborne particulate matter (PM) is important for...

  16. Platinum-group elements, S, Se and Cu in highly depleted abyssal peridotites from the Mid-Atlantic Ocean Ridge (ODP Hole 1274A): Influence of hydrothermal and magmatic processes

    Science.gov (United States)

    Marchesi, Claudio; Garrido, Carlos J.; Harvey, Jason; González-Jiménez, José María; Hidas, Károly; Lorand, Jean-Pierre; Gervilla, Fernando

    2013-11-01

    Highly depleted harzburgites and dunites were recovered from ODP Hole 1274A, near the intersection between the Mid-Atlantic Ocean Ridge and the 15°20'N Fracture Zone. In addition to high degrees of partial melting, these peridotites underwent multiple episodes of melt-rock reaction and intense serpentinization and seawater alteration close to the seafloor. Low concentrations of Se, Cu and platinum-group elements (PGE) in harzburgites drilled at around 35-85 m below seafloor are consistent with the consumption of mantle sulfides after high degrees (>15-20 %) of partial melting and redistribution of chalcophile and siderophile elements into PGE-rich residual microphases. Higher concentrations of Cu, Se, Ru, Rh and Pd in harzburgites from the uppermost and lowest cores testify to late reaction with a sulfide melt. Dunites were formed by percolation of silica- and sulfur-undersaturated melts into low-Se harzburgites. Platinum-group and chalcophile elements were not mobilized during dunite formation and mostly preserve the signature of precursor harzburgites, except for higher Ru and lower Pt contents caused by precipitation and removal of platinum-group minerals. During serpentinization at low temperature (desulfurization to S-poor sulfides (mainly heazlewoodite) and awaruite. Contrary to Se and Cu, sulfur does not record the magmatic evolution of peridotites but was mostly added in hydrothermal sulfides and sulfate from seawater. Platinum-group elements were unaffected by post-magmatic low-temperature processes, except Pt and Pd that may have been slightly remobilized during oxidative seawater alteration.

  17. Concentrations of platinum-group elements (PGE), Re and Au in arsenian pyrite and millerite from Mo–Ni–PGE-Au black shales (Zunyi region, Guizhou Province, China): results from LA-ICPMS study

    Czech Academy of Sciences Publication Activity Database

    Pašava, J.; Ackerman, Lukáš; Halodová, P.; Pour, O.; Ďurišová, Jana; Zaccarini, F.; Aiglsperger, T.; Vymazalová, A.

    2017-01-01

    Roč. 29, č. 4 (2017), s. 623-633 ISSN 0935-1221 R&D Projects: GA ČR GA13-15390S Institutional support: RVO:67985831 Keywords : Mo–Ni–PGE-Au black shale * south China * hydroseparation * arsenian pyrite * millerite * LA-ICPMS analysis * platinum-group elements * PGE * Re * Au and As concentrations Subject RIV: DB - Geology ; Mineralogy OBOR OECD: Geology Impact factor: 1.362, year: 2016

  18. Beneficial reuse `96: The fourth annual conference on the recycle and reuse of radioactive scrap metal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    From October 22-24, 1996 the University of Tennessee`s Energy, Environment and Resources Center and the Oak Ridge National Laboratory`s Center for Risk Management cosponsored Beneficial Reuse `96: The Fourth Annual Conference on the Recycle and Reuse of Radioactive Materials. Along with the traditional focus on radioactive scrap metals, this year`s conference included a wide range of topics pertaining to naturally occurring radioactive materials (NORM), and contaminated concrete reuse applications. As with previous Beneficial Reuse conferences, the primary goal of this year`s conference was to bring together stakeholder representatives for presentations, panel sessions and workshops on significant waste minimization issues surrounding the recycle and reuse of contaminated metals and other materials. A wide range of industry, government and public stakeholder groups participated in this year`s conference. An international presence from Canada, Germany and Korea helped to make Beneficial Reuse `96 a well-rounded affair. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

  19. Seasonal and annual variations of metal uptake, bioaccumulation, and toxicity in Trifolium repens and Lolium perenne growing in a heavy metal-contaminated field.

    Science.gov (United States)

    Bidar, Géraldine; Pruvot, Christelle; Garçon, Guillaume; Verdin, Anthony; Shirali, Pirouz; Douay, Francis

    2009-01-01

    The reclamation of nonferrous metal-polluted soil by phytoremediation requires an overall and permanent plant cover. To select the most suitable plant species, it is necessary to study metal effects on plants over the time, thereby checking that metals remain stored in root systems and not transferred to aerial parts. In this purpose, the seasonal and annual variations of metal bioaccumulation, transfer, and phytotoxicity in Trifolium repens and Lolium perenne grown in a Cd-, Pb-, and Zn-contaminated soil were also studied. The experimental site was located near a closed smelter. In spring 2004, two areas were sown with T. repens and L. perenne, respectively. Thereafter, the samplings of plant roots and shoots and surrounding soils were realized in autumn 2004 and spring and autumn 2005. The soil agronomic characteristics, the Cd, Pb, and Zn concentrations in the surrounded soils and plant organs, as well as the oxidative alterations (superoxide dismutase [SOD], malondialdehyde [MDA], and 8-hydroxy-2'-deoxyguanosine [8-OHdG]) in plant organs were carried out. Whatever the sampling period, metal concentrations in soils and plants were higher than background values. Contrary to the soils, the fluctuations of metal concentrations were observed in plant organs over the time. Bioaccumulation and transfer factors confirmed that metals were preferentially accumulated in the roots as follows: Cd>Zn>Pb, and their transfer to shoots was limited. Foliar metal deposition was also observed. The results showed that there were seasonal and annual variations of metal accumulation in the two studied plant species. These variations differed according to the organs and followed nearly the same pattern for the two species. Oxidative alterations were observed in plant organs with regard to SOD antioxidant activities, MDA, and 8-OHdG concentrations. These alterations vary according to the temporal variations of metal concentrations. Metal concentrations in surrounded soils and plant

  20. Testing the Younger Dryas impact hypothesis with platinum-group elements (PGE), Re, and Os isotopes in sediments from Hall's Cave and Freidken Archaeological site, Texas

    Science.gov (United States)

    Sun, N.; Brandon, A. D.; Forman, S. L.

    2017-12-01

    The Younger Dryas impact hypothesis suggests that extraterrestrial (ET) object(s) hit and exploded over North America 12,900 years ago and triggered the onset of Younger Dryas (YD) cooling and widespread megafaunal extinctions and the demise of the Clovis archeological culture. Supporting signatures such as concentrated carbon spherules and enlogaes, magnetic grains and spherules, nanodiamonds, and Ir-enrichment have been reported, but over time their lack of reproducibility of results at different locations have brought into question the impact hypothesis. Among the impact signatures investigated by previous studies, only few researchers included Re and platinum group element (PGE: Os, Ir, Ru, Rh, Pt, and Pd) characteristic concentrations, and 187Os/188Os ratios for ET mixing in terrestrial materials. Less than 1% of ET materials can provide enriched PGE concentrations, such that PGE are a sensitive tool to identify ET input in terrestrial materials. Because of the large difference between chondritic and continental crust 187Os/188Os ratios, 0.127 and >1.4, respectively, the 187Os/188Os ratios are also highly sensitive indicators of an extraterrestrial component in terrestrial and marine sediments. In this study, we examine sediments associated with the YD from two reported sites in North America, Hall's Cave and the Freidken Archaeological site in Central Texas, using the PGE and Re geochemical approach to test the evidence of the extraterrestrial projectiles during Younger Dryas period. Our current data show at Hall's Cave the PGE concentrations and patterns do not confirm the presence of an elevated meteoritic contribution. However, the 187Os/188Os depth profile shows a sudden 187Os/188Os decrease from 2.28 2.45 to 1.64 at the YD boundary layer, consistent with an increase in material derived from ET projectiles with chondritic 187Os/188Os ratios contaminating the Earth surface at the time of the YD extinction. Additional samples from the YD boundary at the

  1. Seasonal variation and annual trends of metals and metalloids in the blood of the Little Penguin (Eudyptula minor).

    Science.gov (United States)

    Finger, Annett; Lavers, Jennifer L; Orbell, John D; Dann, Peter; Nugegoda, Dayanthi; Scarpaci, Carol

    2016-09-15

    Little Penguins (Eudyptula minor) are high-trophic coastal feeders and are effective indicators of bioavailable pollutants in their foraging zones. Here, we present concentrations of metals and metalloids in blood of 157 Little Penguins, collected over three years and during three distinct seasons (breeding, moulting and non-breeding) at two locations: the urban St Kilda colony and the semi-rural colony at Phillip Island, Victoria, Australia. Penguin metal concentrations were foremostly influenced by location (St Kilda>Phillip Island for non-essential elements) and differed among years and seasons at both locations, reflecting differences in seasonal metal bioaccumulation or seasonal exposure through prey. Mean blood mercury concentrations showed an increasing annual trend and a negative correlation with flipper length at St Kilda. Notably, this study is the first to report on blood metal concentrations during the different stages of moult, showing the mechanism of non-essential metal mobilisation and detoxification. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Annual and seasonal variability of metals and metalloids in urban and industrial soils in Alcalá de Henares (Spain)

    International Nuclear Information System (INIS)

    Peña-Fernández, A.; Lobo-Bedmar, M.C.; González-Muñoz, M.J.

    2015-01-01

    Contamination of urban and industrial soils with trace metals has been recognized as a major concern at local, regional and global levels due to their implication on human health. In this study, concentrations of aluminum (Al), arsenic (As), beryllium (Be), cadmium (Cd), chromium (Cr), manganese (Mn), nickel (Ni), lead (Pb), tin (Sn), thallium (Tl), vanadium (V) and zinc (Zn) were determined in soil samples collected in Alcalá de Henares (Madrid, Spain) in order to evaluate the annual and seasonal variation in their levels. The results show that the soils of the industrial area have higher metals concentrations than the urban area. Principal component analysis (PCA) revealed that the two principal sources of trace metal contamination, especially Cd, Cu, Pb, and Zn in the urban soils of Alcalá can be attributed to traffic emissions, while As, Ni and Be primarily originated from industrial discharges. The seasonal variation analysis has revealed that the emission sources in the industrial area remain constant with time. However, in urban areas, both emissions and emission pathways significantly increase over time due to ongoing development. Currently, there is no hypothesis that explains the small seasonal fluctuations of trace metals in soils, since there are many factors affecting this. Owing to the fact that urban environments are becoming the human habitat, it would therefore be advisable to monitor metals and metalloids in urban soils because of the potential risks to human health. - Highlights: • Anthropogenic activities may affect the seasonal metal variation in Alcalá's soils. • Weather characteristics may also influence the seasonal metal variation in soils. • Alcalá's continual urban growth may have increased the levels of metals in its soils. • Metal variability in Alcalá's industrial soils might be dependent on their sources. • High soil metal content might make it difficult to identify temporal variation

  3. Annual and seasonal variability of metals and metalloids in urban and industrial soils in Alcalá de Henares (Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Peña-Fernández, A. [Departamento de Ciencias Biomédicas, Unidad de Toxicología, Universidad de Alcalá, Crta. Madrid-Barcelona Km, 33.6, 28871 Alcalá de Henares, Madrid (Spain); Lobo-Bedmar, M.C. [Instituto Madrileño de Investigación y Desarrollo Rural Agrario y Alimentario (IMIDRA), Finca el Encín, Crta. Madrid-Barcelona Km, 38.2, 28800 Alcalá de Henares, Madrid (Spain); González-Muñoz, M.J., E-mail: mariajose.gonzalez@uah.es [Departamento de Ciencias Biomédicas, Unidad de Toxicología, Universidad de Alcalá, Crta. Madrid-Barcelona Km, 33.6, 28871 Alcalá de Henares, Madrid (Spain)

    2015-01-15

    Contamination of urban and industrial soils with trace metals has been recognized as a major concern at local, regional and global levels due to their implication on human health. In this study, concentrations of aluminum (Al), arsenic (As), beryllium (Be), cadmium (Cd), chromium (Cr), manganese (Mn), nickel (Ni), lead (Pb), tin (Sn), thallium (Tl), vanadium (V) and zinc (Zn) were determined in soil samples collected in Alcalá de Henares (Madrid, Spain) in order to evaluate the annual and seasonal variation in their levels. The results show that the soils of the industrial area have higher metals concentrations than the urban area. Principal component analysis (PCA) revealed that the two principal sources of trace metal contamination, especially Cd, Cu, Pb, and Zn in the urban soils of Alcalá can be attributed to traffic emissions, while As, Ni and Be primarily originated from industrial discharges. The seasonal variation analysis has revealed that the emission sources in the industrial area remain constant with time. However, in urban areas, both emissions and emission pathways significantly increase over time due to ongoing development. Currently, there is no hypothesis that explains the small seasonal fluctuations of trace metals in soils, since there are many factors affecting this. Owing to the fact that urban environments are becoming the human habitat, it would therefore be advisable to monitor metals and metalloids in urban soils because of the potential risks to human health. - Highlights: • Anthropogenic activities may affect the seasonal metal variation in Alcalá's soils. • Weather characteristics may also influence the seasonal metal variation in soils. • Alcalá's continual urban growth may have increased the levels of metals in its soils. • Metal variability in Alcalá's industrial soils might be dependent on their sources. • High soil metal content might make it difficult to identify temporal variation.

  4. Occurrence model for magmatic sulfide-rich nickel-copper-(platinum-group element) deposits related to mafic and ultramafic dike-sill complexes: Chapter I in Mineral deposit models for resource assessment

    Science.gov (United States)

    Schulz, Klaus J.; Woodruff, Laurel G.; Nicholson, Suzanne W.; Seal, Robert R.; Piatak, Nadine M.; Chandler, Val W.; Mars, John L.

    2014-01-01

    Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGE), account for approximately 60 percent of the world’s nickel production. Most of the remainder of the Ni production is derived from lateritic deposits, which form by weathering of ultramafic rocks in humid tropical conditions. Magmatic Ni-Cu±PGE sulfide deposits are spatially and genetically related to bodies of mafic and/or ultramafic rocks. The sulfide deposits form when the mantle-derived mafic and/or ultramafic magmas become sulfide-saturated and segregate immiscible sulfide liquid, commonly following interaction with continental crustal rocks.

  5. Development of an ultratrace analysis method for elements of the platinum group contained in environmental and geological samples using an ICP-QMS with isotope dilution analysis and suitable separation techniques; Entwicklung eines Verfahrens zur Ultraspurenbestimmung der Platingruppenelemente in Umwelt- und geologischen Proben mit einem ICP-QMS unter Verwendung der Isotopenverduennungsanalyse sowie geeigneter Separationstechniken

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M.

    2001-07-01

    This study focussed on developing a method of ultratrace analysis for elements of the platinum group contained in environmental or geological samples using mass spectroscopic isotope dilution analysis followed by measurement on a quadrupol ICP-MS (ICP-QMSIVA). This method was subsequently used for the certification of two reference materials for environmental sampling as part of a EU project titled ''Production and certification of a road dust reference material for platinum, palladium and rhodium (PGEs) in automotive catalytic converters (PACEPAC)''. In the intercomparison round the results obtained were found to be in very good agreement with the weighted mean values of the results obtained by the other participating laboratories. The results obtained with the method developed in this study were used for the preliminary certification procedure across all elements under study without exception. In this way the present study made a substantial contribution to the successful completion of this project, and prior expectations concerning the correctness and consistency of the developed method were satisfied to the full. This is renewed confirmation of the great significance of the isotope dilution technique for the certification of reference materials, which is attributable to the highly accurate results it yields when handled properly. Comparison between CNiS dokimasia and NAA on the one hand, which was carried out in cooperation with the Nuclear Chemical Institute of Mainz University, and the present method on the other showed good agreement in terms of the decrease in Pd and Pt concentrations with growing distance from the motorway. In conjunction with the research results obtained with NAA, a well-established technique, this study shows that elements of the platinum group from automotive catalytic converters are largely emitted in metallic form. ICP-QMSIVA thus represents a very good means of keeping track of the anthropogenic deposition in the

  6. Neutron activation analysis for noble metals in matte leach residues

    International Nuclear Information System (INIS)

    Hart, R.J.

    1978-01-01

    The development of the neutron activation analysis technique as a method for rapid and precise determinations of platinum group metals in matte leach residues depends on obtaining a method for effecting complete and homogeneous sample dilution. A simple method for solid dilution of metal samples is outlined in this study, which provided a basis for the accurate determination of all the noble metals by the Neutron Activation Analysis technique

  7. Annual and seasonal variability of metals and metalloids in urban and industrial soils in Alcalá de Henares (Spain).

    Science.gov (United States)

    Peña-Fernández, A; Lobo-Bedmar, M C; González-Muñoz, M J

    2015-01-01

    Contamination of urban and industrial soils with trace metals has been recognized as a major concern at local, regional and global levels due to their implication on human health. In this study, concentrations of aluminum (Al), arsenic (As), beryllium (Be), cadmium (Cd), chromium (Cr), manganese (Mn), nickel (Ni), lead (Pb), tin (Sn), thallium (Tl), vanadium (V) and zinc (Zn) were determined in soil samples collected in Alcalá de Henares (Madrid, Spain) in order to evaluate the annual and seasonal variation in their levels. The results show that the soils of the industrial area have higher metals concentrations than the urban area. Principal component analysis (PCA) revealed that the two principal sources of trace metal contamination, especially Cd, Cu, Pb, and Zn in the urban soils of Alcalá can be attributed to traffic emissions, while As, Ni and Be primarily originated from industrial discharges. The seasonal variation analysis has revealed that the emission sources in the industrial area remain constant with time. However, in urban areas, both emissions and emission pathways significantly increase over time due to ongoing development. Currently, there is no hypothesis that explains the small seasonal fluctuations of trace metals in soils, since there are many factors affecting this. Owing to the fact that urban environments are becoming the human habitat, it would therefore be advisable to monitor metals and metalloids in urban soils because of the potential risks to human health. Copyright © 2014 Elsevier Inc. All rights reserved.

  8. Spectroscopy, modeling and computation of metal chelate solubility in supercritical CO2. 1998 annual progress report

    International Nuclear Information System (INIS)

    Brennecke, J.F.; Chateauneuf, J.E.; Stadtherr, M.A.

    1998-01-01

    'This report summarizes work after 1 year and 8 months (9/15/96-5/14/98) of a 3 year project. Thus far, progress has been made in: (1) the measurement of the solubility of metal chelates in SC CO 2 with and without added cosolvents, (2) the spectroscopic determination of preferential solvation of metal chelates by cosolvents in SC CO 2 solutions, and (3) the development of a totally reliable computational technique for phase equilibrium computations. An important factor in the removal of metals from solid matrices with CO 2 /chelate mixtures is the equilibrium solubility of the metal chelate complex in the CO 2 .'

  9. Metal induced embrittlement. Annual report, [March 1, 1987--February 29, 1988

    Energy Technology Data Exchange (ETDEWEB)

    Hoagland, R.G.

    1988-11-01

    This program is investigating the causes of embrittlement that occur in certain solid metals when exposed to liquid metals. The degree of embrittlement varies enormously among different solid/liquid pairs as witness, for example, the modest loss of load carrying, ability induced in carbon steels by Pb or the profound embrittlment of aluminum (particularly high strength) alloys by Hg and Ga. The structure of this study involves two types of activities: an experimental fracture mechanics study of the behavior of certain solid metals in liquid metals, and a theoretical study on an atomic scale of the crack tip deformation and extension behavior by means of atomistic simulation. This research, which began March 1, 1987, has completed its 20 month. A brief synopsis is given of performance in each of the areas of activity during the past year.

  10. Metals and Ceramics Division Materials Science Program. Annual progress report for period ending June 30, 1984

    International Nuclear Information System (INIS)

    McHargue, C.J.

    1984-11-01

    This report summarizes the activities of the Materials Sciences Program in the Metals and Ceramics Division for the period January 1, 1983, to June 30, 1984. These activities constitute about one-fourth of the research and development conducted by the division. The emphasis of the program can be described as the scientific design of materials. The efforts are directed toward three classes of materials: high-temperature metallic alloys based on intermetallic compounds, structural ceramics, and radiation-resistant alloys

  11. Ligand intermediates in metal-catalyzed reactions; Annual technical report, August 1, 1992--August 1, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Gladysz, J.A.

    1993-08-10

    Achievements are reported for the following 4 areas: {pi}/{sigma} equillibria in aldehyde and ketone complexes; thermodynamic ligand binding affinities ({alpha},{beta} unsaturated organic carbonyl compounds); (a new form of coordinated carbon) an unsupported C{sub 3} chain that spans two different transition metals; and (a new form of coordinated carbon) an C{sub 3} chain that is anchored by a metal on each end and spanned by a third.

  12. Metals and Ceramics Division Materials Science Program. Annual progress report for period ending June 30, 1984

    Energy Technology Data Exchange (ETDEWEB)

    McHargue, C.J. (comp.)

    1984-11-01

    This report summarizes the activities of the Materials Sciences Program in the Metals and Ceramics Division for the period January 1, 1983, to June 30, 1984. These activities constitute about one-fourth of the research and development conducted by the division. The emphasis of the program can be described as the scientific design of materials. The efforts are directed toward three classes of materials: high-temperature metallic alloys based on intermetallic compounds, structural ceramics, and radiation-resistant alloys.

  13. Architectural design criteria for f-block metal ion sequestering agents. 1998 annual progress report

    International Nuclear Information System (INIS)

    Dixon, D.A.; Hay, B.P.; Paine, R.T.; Raymond, K.N.; Rogers, R.D.; Roundhill, D.M.

    1998-01-01

    'The objective of this project is to provide a means to optimize ligand architecture for f-block metal recognition. The authors strategy builds on an innovative and successful molecular modeling approach in developing polyether ligand design criteria for the alkali and alkaline earth cations. The hypothesis underlying this proposal is that differences in metal ion binding with multidentate ligands bearing the same number and type of donor groups are primarily attributable to intramolecular steric factors. They propose quantifying these steric factors through the application of molecular mechanics models. The research involves close integration of theoretical and experimental chemistry. The experimental work entails synthesizing novel ligands and experimentally determining structures and binding constants for metal ion complexation by series of ligands in which architecture is systematically varied. The theoretical work entails using electronic structure calculations to parameterize a molecular mechanics force field for a range of metal ions and ligand types. The resulting molecular mechanics force field will be used to predict low energy structures for unidentate, bidentate, and multidentate ligands and their metal complexes through conformational searches. Results will be analyzed to assess the relative importance of several steric factors including optimal M-L length, optimal geometry at the metal center, optimal geometry at the donor atoms (complementarity), and conformation prior to binding (preorganization). An accurate set of criteria for the design of ligand architecture will be obtained from these results. These criteria will enable researchers to target ligand structures for synthesis and thereby dramatically reduce the time and cost associated with metal-specific ligand development.'

  14. Architectural design criteria for f-block metal sequestering agents. 1997 annual progress report

    International Nuclear Information System (INIS)

    Hay, B.P.; Paine, R.T.; Roundhill, D.M.

    1997-01-01

    'The objective of this project is to provide the means to optimize ligand architecture for f-block metal recognition. The authors strategy builds on an innovative and successful molecular modeling approach in developing polyether ligand design criteria for the alkali and alkaline earth cations. The hypothesis underlying this proposal is that differences in metal ion binding with multidentate ligands bearing the same number and type of donor groups are primarily attributable to intramolecular steric factors. The authors propose quantifying these steric factors through the application of molecular mechanics models. The proposed research involves close integration of theoretical and experimental chemistry. The experimental work entails synthesizing novel ligands and experimentally determining structures and binding constants for metal ion complexation by series of ligands in which architecture is systematically varied. The theoretical work entails using electronic structure calculations to parameterize a molecular mechanics force field for a range of metal ions and ligand types. The resulting molecular mechanics force field will be used to predict low-energy structures for unidentate, bidentate, and multidentate ligands and their metal complexes through conformational searches. Results will be analyzed to assess the relative importance of several steric factors including optimal M-L length, optimal geometry at the metal center, optimal geometry at the donor atoms (complementarity), and conformation prior to binding (preorganization). An accurate set of criteria for the design of ligand architecture will be obtained from these results. These criteria will enable researchers to target ligand structures for synthesis and thereby dramatically reduce the time and cost associated with metal-specific ligand development.'

  15. Incorporation of transition and platinum group elements (PGE) in Co-rich Mn crusts at Afanasiy-Nikitin Seamount (AFS) in the equatorial S Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Glasby, G.P.

    in the western Pacific. These mineral grains are typically in the size range 10–20 mm but large grains of sulfides up to 1 mm were found in some cases. These authors also noted that ferromanganese crusts have rough surfaces with low relief (0.1–0.15 mm...-ferrous metals of different composition. Native silver was a major constituent but small amounts of gold, iron, copper, tungsten, Fe-Sb oxides, Zn-Ag-Cu sulfides, rare earth phosphates as well as intermetallic Cu-Zn, Cu-Ni, Sn-Pb-Cu-Ni, Ni-Cr-Mo, Fe-Cr-Ni and Au...

  16. Measurement of activation yields for platinum group elements using Bremsstrahlung radiation with end-point energies in the range 11-14 MeV

    Energy Technology Data Exchange (ETDEWEB)

    Tickner, James, E-mail: james.tickner@csiro.a [CSIRO Process Science and Engineering, PMB 5, Menai, NSW 2234 (Australia); Bencardino, Raffaele; Roach, Greg [CSIRO Process Science and Engineering, PMB 5, Menai, NSW 2234 (Australia)

    2010-01-15

    Activation yields have been measured for (gamma,n) reactions of the elements Ru, Rh, Pd, Ir and Pt. Metallic foils of natural isotopic composition were irradiated using Bremsstrahlung radiation produced from an electron linear accelerator operated with electron beam energies in the range 11-14 MeV. Activation products, including both unstable ground states and metastates were measured using a high-purity germanium detector. Cross-sections were estimated from the yield data by assuming a simple two-parameter model for the shape of the cross-section with energy.

  17. Measurement of activation yields for platinum group elements using Bremsstrahlung radiation with end-point energies in the range 11-14 MeV

    International Nuclear Information System (INIS)

    Tickner, James; Bencardino, Raffaele; Roach, Greg

    2010-01-01

    Activation yields have been measured for (γ,n) reactions of the elements Ru, Rh, Pd, Ir and Pt. Metallic foils of natural isotopic composition were irradiated using Bremsstrahlung radiation produced from an electron linear accelerator operated with electron beam energies in the range 11-14 MeV. Activation products, including both unstable ground states and metastates were measured using a high-purity germanium detector. Cross-sections were estimated from the yield data by assuming a simple two-parameter model for the shape of the cross-section with energy.

  18. Annual and long-term prediction of the atmospheric corrosion of metals

    International Nuclear Information System (INIS)

    Morcillo, M.

    1998-01-01

    The atmospheric corrosion of metals is known to be a discontinuous electrochemical process which takes place only when the metallic surface is wet or moistened by different meteorological phenomena (rain, humidity condensation, fog, etc.) The magnitude of atmospheric corrosion would be relatively low if it were not for the presence of certain pollutants in the atmosphere, mainly sulphur dioxide (anthropogenic pollutant) and marine chlorides (natural pollutant). The literature contains different models for predicting the atmospheric metals over short periods (generally one year) and long periods (15, 20 or more years) of atmospheric exposure. In addition to the different meteorological factors (volume of precipitation, days of rain, relative humidity (RH), T, etc.), atmospheric SO 2 deposition rate and atmospheric salinity (Cl - ) appear as independent variables in all of these models. (Author)

  19. Recycle of contaminated scrap metal, Volume 2. Semi-annual report, September 1993--January 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Catalytic Extraction Processing (CEP) has been demonstrated to be a robust, one-step process that is relatively insensitive to wide variations in waste composition and is applicable to a broad spectrum of DOE wastes. Catalytic Processing Unit (CPU) design models have been validated through experimentation to provide a high degree of confidence in our ability to design a bulk solids CPU for processing DOE wastes. Two commercial CEP facilities have been placed in commission and are currently processing mixed low level wastes. These facilities provide a compelling indication of the maturity, regulatory acceptance, and commercial viability of CEP. In concert with the DOE, Nolten Metal Technology designed a program which would challenge preconceptions of the limitations of waste processing technologies: demonstrate the recycling of ferrous and non-ferrous metals--to establish that radioactively contaminated scrap metal could be converted to high-grade, ferrous and non-ferrous alloys which can be reused by DOE or reintroduced into commerce; immobilize radionuclides--that CEP would concentrate the radionuclides in a durable vitreous phase, minimize secondary waste generation and stabilize and reduce waste volume; destroy hazardous organics--that CEP would convert hazardous organics to valuable industrial gases, which could be used as an energy source; recover volatile heavy metals--that CEP`s off-gas treatment system would capture volatile heavy metals, such as mercury and lead; and establish that CEP is economical for processing contaminated scrap metal in the DOE inventory. The execution of this program resulted in all objectives being met. Volume II contains: Task 1.4, optimization of the vitreous phase for stabilization of radioactive species; Task 1.5, experimental testing of Resource Conservation and Recovery Act (RCRA) wastes; and Task 1.6, conceptual design of a CEP facility.

  20. Recycle of contaminated scrap metal, Volume 1. Semi-annual report, September 1993--January 1996

    International Nuclear Information System (INIS)

    1996-07-01

    Catalytic Extraction Processing (CEP) has been demonstrated to be a robust, one-step process that is relatively insensitive to wide variations in waste composition and is applicable to a broad spectrum of DOE wastes. Catalytic Processing Unit (CPU) design models have been validated through experimentation to provide a high degree of confidence in our ability to design a bulk solids CPU for processing DOE wastes. Two commercial CEP facilities have been placed in commission and are currently processing mixed low level wastes. These facilities provide a compelling indication of the maturity, regulatory acceptance, and commercial viability of CEP. In concert with the DOE, Nolten Metal Technology designed a program which would challenge preconceptions of the limitations of waste processing technologies: demonstrate the recycling of ferrous and non-ferrous metals--to establish that radioactively contaminated scrap metal could be converted to high-grade, ferrous and non-ferrous alloys which can be reused by DOE or reintroduced into commerce; immobilize radionuclides--that CEP would concentrate the radionuclides in a durable vitreous phase, minimize secondary waste generation and stabilize and reduce waste volume; destroy hazardous organics--that CEP would convert hazardous organics to valuable industrial gases, which could be used as an energy source; recover volatile heavy metals--that CEP's off-gas treatment system would capture volatile heavy metals, such as mercury and lead; establish that CEP is economical for processing contaminated scrap metal in the DOE inventory. The execution of this program resulted in all objectives being met. Volume I covers: executive summary; task 1.1 design CEP system; Task 1.2 experimental test plan; Task 1.3 experimental testing

  1. Recycle of contaminated scrap metal, Volume 1. Semi-annual report, September 1993--January 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Catalytic Extraction Processing (CEP) has been demonstrated to be a robust, one-step process that is relatively insensitive to wide variations in waste composition and is applicable to a broad spectrum of DOE wastes. Catalytic Processing Unit (CPU) design models have been validated through experimentation to provide a high degree of confidence in our ability to design a bulk solids CPU for processing DOE wastes. Two commercial CEP facilities have been placed in commission and are currently processing mixed low level wastes. These facilities provide a compelling indication of the maturity, regulatory acceptance, and commercial viability of CEP. In concert with the DOE, Nolten Metal Technology designed a program which would challenge preconceptions of the limitations of waste processing technologies: demonstrate the recycling of ferrous and non-ferrous metals--to establish that radioactively contaminated scrap metal could be converted to high-grade, ferrous and non-ferrous alloys which can be reused by DOE or reintroduced into commerce; immobilize radionuclides--that CEP would concentrate the radionuclides in a durable vitreous phase, minimize secondary waste generation and stabilize and reduce waste volume; destroy hazardous organics--that CEP would convert hazardous organics to valuable industrial gases, which could be used as an energy source; recover volatile heavy metals--that CEP`s off-gas treatment system would capture volatile heavy metals, such as mercury and lead; establish that CEP is economical for processing contaminated scrap metal in the DOE inventory. The execution of this program resulted in all objectives being met. Volume I covers: executive summary; task 1.1 design CEP system; Task 1.2 experimental test plan; Task 1.3 experimental testing.

  2. Recycle of contaminated scrap metal, Volume 2. Semi-annual report, September 1993--January 1996

    International Nuclear Information System (INIS)

    1996-07-01

    Catalytic Extraction Processing (CEP) has been demonstrated to be a robust, one-step process that is relatively insensitive to wide variations in waste composition and is applicable to a broad spectrum of DOE wastes. Catalytic Processing Unit (CPU) design models have been validated through experimentation to provide a high degree of confidence in our ability to design a bulk solids CPU for processing DOE wastes. Two commercial CEP facilities have been placed in commission and are currently processing mixed low level wastes. These facilities provide a compelling indication of the maturity, regulatory acceptance, and commercial viability of CEP. In concert with the DOE, Nolten Metal Technology designed a program which would challenge preconceptions of the limitations of waste processing technologies: demonstrate the recycling of ferrous and non-ferrous metals--to establish that radioactively contaminated scrap metal could be converted to high-grade, ferrous and non-ferrous alloys which can be reused by DOE or reintroduced into commerce; immobilize radionuclides--that CEP would concentrate the radionuclides in a durable vitreous phase, minimize secondary waste generation and stabilize and reduce waste volume; destroy hazardous organics--that CEP would convert hazardous organics to valuable industrial gases, which could be used as an energy source; recover volatile heavy metals--that CEP's off-gas treatment system would capture volatile heavy metals, such as mercury and lead; and establish that CEP is economical for processing contaminated scrap metal in the DOE inventory. The execution of this program resulted in all objectives being met. Volume II contains: Task 1.4, optimization of the vitreous phase for stabilization of radioactive species; Task 1.5, experimental testing of Resource Conservation and Recovery Act (RCRA) wastes; and Task 1.6, conceptual design of a CEP facility

  3. Minutes of the 28th Annual Plutonium Sample Exchange Meeting. Part II: metal sample exchange

    International Nuclear Information System (INIS)

    1984-01-01

    Contents of this publication include the following list of participating laboratories; agenda; attendees; minutes of October 25 and 26 meeting; and handout materials supplied by speakers. The handout materials cover the following: statistics and reporting; plutonium - chemical assay 100% minus impurities; americium neptunium, uranium, carbon and iron data; emission spectroscopy data; plutonium metal sample exchange; the calorimetry sample exchange; chlorine determination in plutonium metal using phyrohydrolysis; spectrophotometric determination of 238-plutonium in oxide; plutonium measurement capabilities at the Savannah River Plant; and robotics in radiochemical laboratory

  4. Metals and Ceramics Division Materials Science Program. Annual progress report for period ending December 31, 1982

    International Nuclear Information System (INIS)

    McHargue, C.J.

    1983-05-01

    This report summarizes the activities of the Materials Sciences Program in the Metals and Ceramics Division. These activities constitute about one-fourth of the research and development conducted by the division. The major elements of the Materials Sciences Program can be grouped under the areas of (1) structural characterization, (2) high-temperature alloy studies, (3) structural ceramics, and (4) radiation effects

  5. Metals Processing Laboratory Users (MPLUS) Facility Annual Report FY 2002 (October 1, 2001-September 30, 2002)

    Energy Technology Data Exchange (ETDEWEB)

    Angelini, P

    2004-04-27

    The Metals Processing Laboratory Users Facility (MPLUS) is a Department of Energy (DOE), Energy Efficiency and Renewable Energy, Industrial Technologies Program, user facility designated to assist researchers in key industries, universities, and federal laboratories in improving energy efficiency, improving environmental aspects, and increasing competitiveness. The goal of MPLUS is to provide access to the specialized technical expertise and equipment needed to solve metals processing issues that limit the development and implementation of emerging metals processing technologies. The scope of work can also extend to other types of materials. MPLUS has four primary user centers: (1) Processing--casting, powder metallurgy, deformation processing (including extrusion, forging, rolling), melting, thermomechanical processing, and high-density infrared processing; (2) Joining--welding, monitoring and control, solidification, brazing, and bonding; (3) Characterization--corrosion, mechanical properties, fracture mechanics, microstructure, nondestructive examination, computer-controlled dilatometry, and emissivity; and (4) Materials/Process Modeling--mathematical design and analyses, high-performance computing, process modeling, solidification/deformation, microstructure evolution, thermodynamic and kinetic, and materials databases A fully integrated approach provides researchers with unique opportunities to address technologically related issues to solve metals processing problems and probe new technologies. Access is also available to 16 additional Oak Ridge National Laboratory (ORNL) user facilities ranging from state-of-the-art materials characterization capabilities, and high-performance computing to manufacturing technologies. MPLUS can be accessed through a standardized user-submitted proposal and a user agreement. Nonproprietary (open) or proprietary proposals can be submitted. For open research and development, access to capabilities is provided free of charge

  6. Metals and Ceramics Division materials science program. Annual progress report for period ending June 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    McHargue, C.J. (comp.)

    1981-09-01

    Information is presented concerning the theoretical studies of metals and alloys; x-ray diffraction research; structural ceramics; structure of coal; analytical and high-voltage electron microscopy; deformation and mechanical properties; mechanisms of surface and solid-state reactions; physical properties research; metastable materials; neutron radiation effects; charged particle radiation effects; theory and modeling of radiation effects; facility and advanced technique development; fundamentals of welding and joining; and studies in nondestructive evaluation.

  7. Metals and Ceramics Division materials science program. Annual progress report for period ending June 30, 1981

    International Nuclear Information System (INIS)

    McHargue, C.J.

    1981-09-01

    Information is presented concerning the theoretical studies of metals and alloys; x-ray diffraction research; structural ceramics; structure of coal; analytical and high-voltage electron microscopy; deformation and mechanical properties; mechanisms of surface and solid-state reactions; physical properties research; metastable materials; neutron radiation effects; charged particle radiation effects; theory and modeling of radiation effects; facility and advanced technique development; fundamentals of welding and joining; and studies in nondestructive evaluation

  8. Metals Processing Laboratory Users (MPLUS) Facility Annual Report: October 1, 2000 through September 30, 2001

    Energy Technology Data Exchange (ETDEWEB)

    Angelini, P

    2004-04-27

    The Metals Processing Laboratory Users Facility (MPLUS) is a Department of Energy (DOE), Energy Efficiency and Renewable Energy, Industrial Technologies Program user facility designated to assist researchers in key industries, universities, and federal laboratories in improving energy efficiency, improving environmental aspects, and increasing competitiveness. The goal of MPLUS is to provide access to the specialized technical expertise and equipment needed to solve metals processing issues that limit the development and implementation of emerging metals processing technologies. The scope of work can also extend to other types of materials. MPLUS has four primary User Centers including: (1) Processing--casting, powder metallurgy, deformation processing including (extrusion, forging, rolling), melting, thermomechanical processing, high density infrared processing; (2) Joining--welding, monitoring and control, solidification, brazing, bonding; (3) Characterization--corrosion, mechanical properties, fracture mechanics, microstructure, nondestructive examination, computer-controlled dilatometry, and emissivity; (4) Materials/Process Modeling--mathematical design and analyses, high performance computing, process modeling, solidification/deformation, microstructure evolution, thermodynamic and kinetic, and materials data bases. A fully integrated approach provides researchers with unique opportunities to address technologically related issues to solve metals processing problems and probe new technologies. Access is also available to 16 additional Oak Ridge National Laboratory (ORNL) user facilities ranging from state of the art materials characterization capabilities, high performance computing, to manufacturing technologies. MPLUS can be accessed through a standardized User-submitted Proposal and a User Agreement. Nonproprietary (open) or proprietary proposals can be submitted. For open research and development, access to capabilities is provides free of charge while

  9. Roadside Accumulation of Pt, Pd, Rh and Other Trace Elements From Automobiles: Catalytic Converter Attrition and Platinum-Group Element Mobility in the Roadside Environment.

    Science.gov (United States)

    Ely, J. C.; Dahlheimer, S. R.; Neal, C. R.

    2003-12-01

    Elemental abundances of Pt, Pd and Rh have been documented across the industrialized world in roadside environments due to attrition of automotive catalytic converters (Zereini and Alt, 2000, Anthropogenic PGE Emissions, Springer, 308pp; Ely et al., 2001, EnvSci&Tech, 35:3816-3822; Whiteley and Murray, 2003, SciTotEnv, in press). In our ongoing study, the highest reported roadside Pt abundance 1.8 ppm has been found immediately adjacent to the road at a field site in South Bend, IN, USA. Furthermore, initial studies show positive correlations of Pt, Pd and Rh with some trace elements (Ni, Cu, Zn and Pb), which has been confirmed by further analysis for these and other elements (Ce, Cr). It has been demonstrated that elements such as Ce are present in catalytic converters at concentrations of 100's ppm to 3-wt.%. These elements are also being attrited with Pt, Pd and Rh and aerially transported and deposited. Our field site was established next to US-933 adjacent to the Notre Dame campus. Areas were cleared of the top 2-4 cm of soil (removing surficial Pt, Pd and Rh) at 1, 5, 10 and 50 meters from the roadside. Within 3 months the 1-meter site contained 67% of the initial Rh and Pt concentrations and 100% of the initial Pd concentration. The sites at 5, 10 and 50 meters showed similar results, in some cases exceeding the initial concentrations. After 6 months the concentrations of Pt, Pd and Rh were all within error of the initial concentrations, indicating steady state abundances had probably been reached. Grass samples from each site showed that washed vs. unwashed samples were within error of each other, and there may be a slight enrichment (approx. 1 ppb) in the grasses of Pd and Pt, but this enrichment was independent of distance from the road. The steady-state situation suggests that the PGEs are being removed from the immediate roadside environment, which requires that the metals are being oxidized and/or complexed in such a way to facilitate transport. The

  10. Metals and Ceramics Division annual progress report, October 1, 1978-June 30, 1979

    International Nuclear Information System (INIS)

    Peterson, S.

    1979-09-01

    Research is reported concerning: (1) engineering materials including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuels fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy and properties, radiation effects and microstructural analysis, metastable and superconducting materials, structure and properties of surfaces, theoretical research, and x-ray research and applications. Highlights of the work of the metallographic group and the current status of the High-Temperature Materials Laboratory (HTML) and the Materials and Structures Technology Management Center (MSTMC) are presented

  11. Metals and Ceramics Division. Annual progress report, ending June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Research is reported concerning: (1) engineering materials, including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuel fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy properties, radiation effects and microstructural analysis, metastable and superconducting materials, structure and properties of surfaces, theroretical research and x-ray research and applications. Highlights of the work of the metallographic group and the current state of the High-Temperature Materials Laboratory (HTML) and the Materials and Structures Technology Management Center (MSTMC) are presented. (FS)

  12. Metals and Ceramics Division annual progress report, October 1, 1978-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, S. (ed.)

    1979-09-01

    Research is reported concerning: (1) engineering materials including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuels fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy and properties, radiation effects and microstructural analysis, metastable and superconducting materials, structure and properties of surfaces, theoretical research, and x-ray research and applications. Highlights of the work of the metallographic group and the current status of the High-Temperature Materials Laboratory (HTML) and the Materials and Structures Technology Management Center (MSTMC) are presented. (FS)

  13. Metals and Ceramics Division. Annual progress report, ending June 30, 1980

    International Nuclear Information System (INIS)

    1980-09-01

    Research is reported concerning: (1) engineering materials, including materials compatibility, mechanical properties, nondestructive testing, pressure vessel technology, and welding and brazing; (2) fuels and processes consisting of ceramic technology, fuel cycle technology, fuels evaluation, fuel fabrication and metals processing; and (3) materials science which includes, ceramic studies, physical metallurgy properties, radiation effects and microstructural analysis, metastable and superconducting materials, structure and properties of surfaces, theroretical research and x-ray research and applications. Highlights of the work of the metallographic group and the current state of the High-Temperature Materials Laboratory (HTML) and the Materials and Structures Technology Management Center (MSTMC) are presented

  14. Removal of technetium, carbon tetrachloride, and metals from DOE properties. 1998 annual progress report

    International Nuclear Information System (INIS)

    Darab, J.G.; Mallouk, T.E.; Ponder, S.M.

    1998-01-01

    'The objective of the project is to develop and characterize supported reducing agents, and solid waste forms derived from them, which will be effective in the removal of transition metal ions, chlorinated organic molecules, and technetium from aqueous mixed wastes. This work follows the discovery that a nanoscale form of zero-valent iron, dispersed on high surface area supports, reduces metal ions (chromium, mercury, and lead) and rhenium (as a surrogate for technetium) to insoluble forms much faster than does unsupported iron. The scientific goals of the project are to better understand the mechanism of the reduction process, to develop supports that are compatible with a variety of mixed waste compositions, and to develop surface modifiers for the supported iron aggregates that will optimize their selectivity for the contaminants of interest. The support composition is of particular interest in the case of technetium (Tc) separation and stabilization in the Hanford tank wastes. While it is expected that pertechnetate will be reduced insoluble TcO 2 , the support material must be compatible with the vitrification process used in the final waste disposition. The surface modifications are also a focal point for Hanford applications because of the complex and variable makeup of the tank wastes. This report summarizes progress in the first 8 months of a 3-year collaborative project involving Penn State and Pacific Northwest National Laboratory (PNNL).'

  15. Metal speciation in surface waters of the Great Lakes region. Annual report (final)

    International Nuclear Information System (INIS)

    Giesy, J.P.

    1983-01-01

    Predicting the dynamics of trace metals such as uranium by thermodynamic prediction models is contingent upon accurate stability constants. Conditional stability constants (K') for the binding of uranyl ion UO2(+2) to humic substances were determined by both Scatchard analyses and by fitting the data to a Gaussian model of multiple sites. UO2(+2) was separated from that which was bound to humic material by ion exchange. Uranium concentration was measured by laser fluorometry. There is a broad range of strengths of sites such that K' was dependent on the UO2(+2)/humic ratio. The maximum binding capacity of the humic material was .000483 M/g. The log K' determined for log metal/ligand ratios of -1.5 to -0.5, the ecologically significant range of interest for UO2(+2), which was from 10 - 50 microgram/l at the carbon concentration of 2.36 mg/l used in this study, was determined by Scatchard analysis to be 7.38. The estimate based on a Gaussian distribution was 6.85

  16. Potential-modulated intercalation of alkali cations into metal hexacyanoferrate coated electrodes. 1998 annual progress report

    International Nuclear Information System (INIS)

    Schwartz, D.T.

    1998-01-01

    'This program is studying potential-driven cation intercalation and deintercalation in metal hexacyanoferrate compounds, with the eventual goal of creating materials with high selectivity for cesium separations and long cycle lifetimes. The separation of radiocesium from other benign cations has important implications for the cost of processing a variety of cesium contaminated DOE wasteforms. This report summarizes results after nine months of work. Much of the initial efforts have been directed towards quantitatively characterizing the selectivity of nickel hexacyanoferrate derivatized electrodes for intercalating cesium preferentially over other alkali metal cations. Using energy dispersive xray spectroscopy (ex-situ, but non-destructive) and ICP analysis (ex-situ and destructive), the authors have demonstrated that the nickel hexacyanoferrate lattice has a strong preference for intercalated cesium over sodium. For example, when ions are reversibly loaded into a nickel hexacyanoferrate thin film from a solution containing 0.9999 M Na + and 0.0001 M Cs + , the film intercalates 40% as much Cs + as when loaded from pure 1 M Cs + containing electrolyte (all electrolytes use nitrates as the common anion). The authors have also shown that, contrary to the common assumptions found in the literature, a significant fraction of the thin film is not active initially. A new near infrared laser has been purchased and is being added to the Raman spectroscopy facilities to allow in-situ studies of the intercalation processes.'

  17. Data Summary Report for the Annual Fourmile Branch and F- and H-Area Seeplines, Appendix IX Metals and Radionuclides, 1998

    International Nuclear Information System (INIS)

    Koch, J.

    1999-01-01

    This report presents a summary of the definitive data validation and verification for the 1998 RFI/RI annual Appendix IX metals and radionuclides survey for Fourmile Branch and the F- and H-Area Seeplines. The validation process began with project mobilization and continued through the delivery of EDDs and this report

  18. Alkali metal-refractory metal biphase electrode for AMTEC

    Science.gov (United States)

    Williams, Roger M. (Inventor); Bankston, Clyde P. (Inventor); Cole, Terry (Inventor); Khanna, Satish K. (Inventor); Jeffries-Nakamura, Barbara (Inventor); Wheeler, Bob L. (Inventor)

    1989-01-01

    An electrode having increased output with slower degradation is formed of a film applied to a beta-alumina solid electrolyte (BASE). The film comprises a refractory first metal M.sup.1 such as a platinum group metal, suitably platinum or rhodium, capable of forming a liquid or a strong surface adsorption phase with sodium at the operating temperature of an alkali metal thermoelectric converter (AMTEC) and a second refractory metal insoluble in sodium or the NaM.sup.1 liquid phase such as a Group IVB, VB or VIB metal, suitably tungsten, molybdenum, tantalum or niobium. The liquid phase or surface film provides fast transport through the electrode while the insoluble refractory metal provides a structural matrix for the electrode during operation. A trilayer structure that is stable and not subject to deadhesion comprises a first, thin layer of tungsten, an intermediate co-deposited layer of tungsten-platinum and a thin surface layer of platinum.

  19. Metals and Ceramics Division materials science annual progress report for period ending June 30, 1977

    International Nuclear Information System (INIS)

    McHargue, C.J.

    1977-09-01

    Progress is reported for research programs in the metals and ceramics division of ORNL. In structure of materials, theoretical research, x-ray diffraction studies, studies of erosion of ceramics, preparation and synthesis of high temperature and special service materials, and studies of stabilities of microphases in high-temperature structural materials. Research into deformation and mechanical properties included physical metallurgy, and grain boundary segregation and embrittlement. Physical properties and transport phenomena were studied and included mechanisms of surface and solid state reactions, and properties of superconducting materials. The radiation effects program, directed at understanding the effects of composition and microstructure on the structure and properties of materials irradiated at elevated temperatures, is also described

  20. Experimental two-phase liquid-metal magnetohydrodynamic generator program. Annual report, October 1976--September 1977

    International Nuclear Information System (INIS)

    Petrick, M.; Fabris, G.; Pierson, E.S.; Fischer, A.K.; Johnson, C.E.

    1978-05-01

    Testing of the second diverging-channel generator with the revised ambient-temperature NaK-N 2 facility has been completed. The primary goal of the revised facility, demonstrating reduced slip ratio (ratio of gas velocity to liquid velocity) with higher liquid velocity (flow rate), was accomplished. The reduction in slip ratio was dramatically demonstrated by a series of consecutive runs with varying flow rate (from 6 kg/s to 12 kg/s for the liquid). Substantial increases in generator efficiency were obtained with higher liquid flow rates. Experiments to demonstrate that good liquid-to-gas heat transfer exists in the generator were successfully completed. Good heat transfer is essential because it is the almost-constant-temperature expansion of the gas (vapor) in the generator that yields the higher system efficiencies for liquid-metal MHD power cycles. The feasibility of generating relatively-stable bubbles, hence, a foam, in liquid metals has been demonstrated. Photographic documentation of these phenomena, both motion and still pictures, was made. Surface tension measurements and foaming experiments have shown that viscosity is also a factor in promoting bubble formation and persistence. Wetting and contact angle measurements have been made for stainless steel and carbon steel immersed in eutectic NaK. An analytical study of the liquid shunt (wall) layer sizes and losses has shown that these losses are not expected to be significant for large generators; less than 1.0 percent decrease in efficiency is anticipated. A two-phase pressure-gradient correlation developed for MHD flows has been shown to agree to within 20 percent with the generator data

  1. The use of cation exchange matrix separation coupled with ICP-MS to directly determine platinum group element (PGE) and other trace element emissions from passenger cars equipped with diesel particulate filters (DPF)

    Energy Technology Data Exchange (ETDEWEB)

    Cairns, Warren R.L.; Cozzi, Giulio [Institute for the Dynamics of Environmental Processes-CNR, Venice (Italy); De Boni, Antonella; Gabrieli, Jacopo [University of Venice, Department of Environmental Science, Venice (Italy); Asti, Massimo; Merlone Borla, Edoardo; Parussa, Flavio [Centro Ricerche Fiat, Orbassano (Italy); Moretto, Ezio [FIAT Powertrain Technologies S.p.A, Turin (Italy); Cescon, Paolo; Barbante, Carlo [University of Venice, Department of Environmental Science, Venice (Italy); Institute for the Dynamics of Environmental Processes-CNR, Venice (Italy); Boutron, Claude [Laboratoire de Glaciologie et Geophysique de l' Environnement, UMR CNRS 5183, B.P. 96, Saint Martin d' Heres Cedex (France)

    2011-03-15

    Inductively coupled plasma-mass spectrometry coupled with cation exchange matrix separation has been optimised for the direct determination of platinum group element (PGE) and trace element emissions from a diesel engine car. After matrix separation method detection limits of 1.6 ng g{sup -1} for Pd, 0.4 ng g{sup -1} for Rh and 4.3 ng g{sup -1} for Pt were achieved, the method was validated against the certified reference material BCR 723, urban road dust. The test vehicle was fitted with new and aged catalytic converters with and without diesel particulate filters (DPF). Samples were collected after three consecutive New European Driving Cycle (NEDC) of the particulate and ''soluble'' phases using a home-made sampler optimised for trace element analysis. Emission factors for the PGEs ranged from 0.021 ng km{sup -1} for Rh to 70.5 ng km{sup -1} for Pt; when a DPF was fitted, the emission factors for the PGEs actually used in the catalysts dropped by up to 97% (for Pt). Trace element emission factors were found to drop by a maximum of 92% for Ni to a minimum of 18% for Y when a DPF was fitted; a new DPF was also found to cause a reduction of up to 86% in the emission of particulate matter. (orig.)

  2. Isotope dilution inductively coupled plasma quadrupole mass spectrometry in connection with a chromatographic separation for ultra trace determinations of platinum group elements (Pt, Pd, Ru, Ir) in environmental samples.

    Science.gov (United States)

    Müller, M; Heumann, K G

    2000-09-01

    An isotope dilution inductively coupled plasma quadrupole mass spectrometric (ID-ICP-QMS) method was developed for the simultaneous determination of the platinum group elements Pt, Pd, Ru, and Ir in environmental samples. Spike solutions, enriched with the isotopes 194Pt, 108Pd, 99Ru, and 191Ir, were used for the isotope dilution step. Interfering elements were eliminated by chromatographic separation using an anion-exchange resin. Samples were dissolved with aqua regia in a high pressure asher. Additional dissolution of possible silicate portions by hydrofluoric acid was usually not necessary. Detection limits of 0.15 ng x g(-1), 0.075 ng x g(-1), and 0.015 ng x g(-1) were achieved for Pt, Pd, Ru, and Ir, respectively, using sample weights of only 0.2 g. The reliability of the ID-ICP-QMS method was demonstrated by analyzing a Canadian geological reference material and by participating in an interlaboratory study for the determination of platinum and palladium in a homogenized road dust sample. Surface soil, sampled at different distances from a highway, showed concentrations in the range of 0.1-87 ng x g(-1). An exponential decrease of the platinum and palladium concentration with increasing distance and a small anthropogenic contribution to the natural background concentration of ruthenium and iridium was found in these samples.

  3. Concentrations of Platinum Group Elements (Pt, Pd, Rh in Airborne Particulate Matter (PM2.5 and PM10-2.5 Collected at Selected Canadian Urban Sites: a Case Study

    Directory of Open Access Journals (Sweden)

    Celo V.

    2013-04-01

    Full Text Available Increasing environmental concentrations of platinum group elements (PGEs, in particular platinum (Pt, palladium (Pd and rhodium (Rh, from catalytic converters has been reported worldwide. Initially it was believed that the emitted PGEs remain in the roadside environment, but recent studies have shown that fine PGE-containing particles can be transported and distributed at regional and long-range levels. Therefore, the monitoring of PGEs in airborne particulate matter (PM is important for the estimation of potential risks to human health and to the ecosystem. The aim of this study is to present the first results from an analysis on the concentration and distribution of Pt, Pd and Rh in PM collected on Teflon filters at two selected urban sites (Toronto, Ontario; Edmonton, Alberta collected within the Canadian National Air Pollution Surveillance (NAPS network. In this work, a quadruple inductively coupled plasma mass spectrometry (ICP-MS, combined with microwave assisted acid digestion using aqua regia was used. A cation exchange separation was used to alleviate the matrix-induced spectral and nonspectral interferences prior to ICP-MS analysis. To obtain sufficient material needed for PGEs analysis, fine PM (particles with aerodynamic diameter less than 2.5 mm; PM2.5 and coarse PM (with aerodynamic diameter between 2.5 and 10 mm; PM10-2.5 samples were combined into composite samples on a seasonal basis. The obtained results will be discussed and compared with literature data.

  4. Platinum-Group Minerals in Chromitites of the Niquelândia Layered Intrusion (Central Goias, Brazil: Their Magmatic Origin and Low-Temperature Reworking during Serpentinization and Lateritic Weathering

    Directory of Open Access Journals (Sweden)

    Nelson Angeli

    2012-10-01

    Full Text Available A variety of platinum-group-minerals (PGM have been found to occur associated with the chromitite and dunite layers in the Niquelândia igneous complex. Two genetically distinct populations of PGM have been identified corresponding to phases crystallized at high temperatures (primary, and others formed or modified during post-magmatic serpentinization and lateritic weathering (secondary. Primary PGM have been found in moderately serpentinized chromitite and dunite, usually included in fresh chromite grains or partially oxidized interstitial sulfides. Due to topographically controlled lateritic weathering, the silicate rocks are totally transformed to a smectite-kaolinite-garnierite-amorphous silica assemblage, while the chromite is changed into a massive aggregate of a spinel phase having low-Mg and a low Fe3+/Fe2+ ratio, intimately associated with Ti-minerals, amorphous Fe-hydroxides, goethite, hematite and magnetite. The PGM in part survive alteration, and in part are corroded as a result of deep chemical weathering. Laurite is altered to Ru-oxides or re-crystallizes together with secondary Mg-ilmenite. Other PGM, especially the Pt-Fe alloys, re-precipitate within the altered chromite together with kaolinite and Fe-hydroxides. Textural evidence suggests that re-deposition of secondary PGM took place during chromite alteration, controlled by variation of the redox conditions on a microscopic scale.

  5. Experimental two-phase liquid--metal magnetohydrodynamic generator program. Annual report, August 1975--September 1976

    International Nuclear Information System (INIS)

    Petrick, M.; Fabris, G.; Pierson, E.S.; Carl, D.A.; Fischer, A.K.; Johnson, C.E.

    1977-09-01

    The revised ambient-temperature NaK-nitrogen facility is described. The maximum liquid flow rate and generator inlet pressure are 10.9 kg/s 200 gpm) and 1.48 MP/sub a/ absolute (200 psig), respectively, compared with the previous values of 6 kg/s (110 gpm) and 0.72 MPa absolute (90 psig). Satisfactory loop operation has been obtained, and new experiments with the second diverging-channel generator were completed. The principal experimental results were a higher power density for the same generator operating conditions, and an apparent tendency for the efficiency to improve more with increasing quality at higher velocities than lower velocities. An evaluation of an annular generator geometry is presented. The advantages and disadvantages of the geometry are described, the equations developed, and solutions obtained for three cases--constant velocity and no armature reactions, laminar flow with no armature reaction, and armature reaction with constant velocity. Numerical examples show that: (1) the attainable terminal voltages appear to be very low, (2) flow reversal and large viscous loss occur at or below the desired power densities, and (3) armature reaction effects are important and compensation techniques appear impractical. Thus, this annular geometry does not appear attractive for either generator or pump operation. The initial steps in the program to produce and evaluate liquid-metal foams are described. The future directions of the expermental generator program, including foams, are discussed

  6. Metals and Ceramics Division Materials Sciences Program: Annual progress report for period ending June 30, 1987

    Energy Technology Data Exchange (ETDEWEB)

    Stiegler, J.O. (comp.)

    1988-04-01

    The program is directed at uncovering principles for the scientific design of materials. The efforts emphasize three classes of materials: high-temperature metallic alloys based on intermetallic compounds, structural ceramics, and radiation-resistant alloys. The first two materials are central to the theme of the High Temperature Materials Laboratory, and the third supports the Laboratory's mission in fission and fusion reactor technology. We combine the use of unique structural characterization facilities, the activities of the Theory Group, and accurate property determination to establish structure-property relationships. An important aspect of the program is the interaction with universities, industry, and other laboratories. Two collaborative research centers established to aid these interactions are SHaRe and ORSOAR, which make our strong structural characterization capabilities available to researchers outside ORNL. Their research activities and capabilities are summarized in Chap. 1, ''Structural Characterization,'' and Chap. 6, ''Collaborative Research Centers.'' Other interactions with the scientific community are summarized in the Appendixes.

  7. Plant rhizosphere effects on metal mobilization and transport. 1997 annual progress report

    International Nuclear Information System (INIS)

    Crowley, D.E.; Fan, T.W.M.; Higashi, R.M.

    1997-01-01

    'During the funding period of 1996--1997, the authors explored the utility of multi-nuclear, two-dimensional nuclear magnetic resonance (NMR) spectroscopy and gas chromatography-mass spectrometry (GC-MS) for a comprehensive analysis of barley root exudates collected under Fe sufficient and deficient conditions. As both structural and quantitative information was obtained directly from crude root exudates using this approach, no tedious sample fractionation was necessary, which will greatly facilitate future chemical characterization of root exudates in general. They found that the phytosiderophore mugineic acids (including 2'-deoxymugineic acid, mugineic acid, and 3-epi-hydroxymugineic acid) were readily identified and quantified in crude exudate samples along with a number of amino and organic acids. The amount of mugineic acids excreted was correlated positively with the extent of Fe deficiency with 3-epi-hydroxymugineic acid being the most prominent component. The total Fe chelating capacity was also measured using the ferrozine assay and compared with the production of the mugineic acids. They were surprised to find that the mugineic acids may account for a part of the Fe chelating capacity, especially under mild and moderatley Fe deficient conditions. Lactate, alanine, y-aminobutyrate, malate, and glycinebetaine collectively may contribute to a significant fraction of the Fe chelating capacity. In light of the known stimulatory effect of alanine and citrate on metal availability to algae (Campell, 1995), the function of these low molecular weight metabolites as vehicles for Fe or metal uptake in general warrant further investigation. This work is now published in Analytical Biochemistry 251, 57-68 ( 1997). They then proceeded to apply the above approach to investigate the interaction of elevated cadmium (Cd) with Fe deficiency in gramineous plants. They have completed one each series of cadmium (Cd) treatments of barley and wheat seedlings under Fe sufficient

  8. Ionizing radiation induced catalysis on metal oxide particles. 1998 annual progress report

    International Nuclear Information System (INIS)

    Chambers, S.A.; Daschbach, J.L.; Fryberger, T.; Henderson, M.A.; Peden, C.H.F.; Su, Y.; Wang, Y.

    1998-01-01

    -radiocatalysis and extending the body of knowledge about e - /h + pair chemistry of semiconducting metal oxide (MO) materials by examining the influence of surface structure, defects and dopants on the photocatalytic activity of narrow bandgap materials (TiO 2 ). An outcome of this proposed work will be a more thorough evaluation of the use of ionizing radiation in the catalytic remediation of organics (and other problem species) in high-level mixed waste.'

  9. Designer ligands: The search for metal ion selectivity

    Directory of Open Access Journals (Sweden)

    Perry T. Kaye

    2011-03-01

    Full Text Available The paper reviews research conducted at Rhodes University towards the development of metal-selective ligands. The research has focused on the rational design, synthesis and evaluation of novel ligands for use in the formation of copper complexes as biomimetic models of the metalloenzyme, tyrosinase, and for the selective extraction of silver, nickel and platinum group metal ions in the presence of contaminating metal ions. Attention has also been given to the development of efficient, metal-selective molecular imprinted polymers.

  10. Material efficiency: rare and critical metals.

    Science.gov (United States)

    Ayres, Robert U; Peiró, Laura Talens

    2013-03-13

    In the last few decades, progress in electronics, especially, has resulted in important new uses for a number of geologically rare metals, some of which were mere curiosities in the past. Most of them are not mined for their own sake (gold, the platinum group metals and the rare Earth elements are exceptions) but are found mainly in the ores of the major industrial metals, such as aluminium, copper, zinc and nickel. We call these major metals 'attractors' and the rare accompanying metals 'hitch-hikers'. The key implication is that rising prices do not necessarily call forth greater output because that would normally require greater output of the attractor metal. We trace the geological relationships and the functional uses of these metals. Some of these metals appear to be irreplaceable in the sense that there are no known substitutes for them in their current functional uses. Recycling is going to be increasingly important, notwithstanding a number of barriers.

  11. Determination of platinum group elements and gold in reference materials by instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry with nickel sulphide fire-assay collection

    International Nuclear Information System (INIS)

    Morcelli, C.P.R.; Figueiredo, A.M.G.; Sarkis, J.E.S.; Kakazu, M.; Enzweiler, J.

    2002-01-01

    Instrumental Neutron Activation Analysis (INAA) and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) after NiS fire assay were used to determine platinum group elements (PGE) and Au in the geological reference materials peridotite GPt-3 and pyroxene peridotite GPt-4 (IGGE, China). INAA has been one of the most useful analytical techniques for PGEs and Au determination, due to its high sensitivity and accuracy. After the fire assay, the NiS button is dissolved in concentrated hydrochloric acid, leaving a residue of insoluble PGE sulphides; the solution is filtered and the filter is directly irradiated with neutrons. In more recent years, ICP-MS with nickel fire assay collection and tellurium coprecipitation has been used as a mean of analysing PGE, with the main advantage of avoiding problems of losses of PGE during the HCl digestion of the NiS button. Buttons were prepared by mixing the sample (10-15 g) with fluxes, nickel and sulphur in a fire clay crucible and fused at temperatures around 1000 deg C. For NAA, the filters containing the PGEs and Au were irradiated at the IEA-R1 research nuclear reactor at IPEN. The measurements of the induced gamma-ray activity were carried out in an hyperpure Ge detector. In general, the results obtained by the two techniques were in good agreement with recommended values. INAA results exhibited higher values than the recommended values for Pd and Pt in GPt-3, while the opposite effect was observed for GPt-4 sample. Ru was not detected by INAA. On the other hand, Rh and Ir were determined more accurately by INAA (relative errors better than 10%). The ICP-MS analytical technique showed better detection limits, and all the PGE were determined. Results obtained for Pt and Pd presented accuracy better than 5% while losses were observed for Os and Ir. (author)

  12. Properties and application of noble metal catalysts for heterogeneous catalytic hydrogenations

    Energy Technology Data Exchange (ETDEWEB)

    Horn, G; Frohning, C D; Cornils, B [Ruhrchemie A.G., Oberhausen (Germany, F.R.)

    1976-07-01

    The special properties of the six platinum group elements - ruthenium, rhodium, palladium, osmium, iridium, platinum - make them useful as active metals for catalytic reactions. Especially valuable is their property of favouring a single reaction even when the possibility of a number of parallel reactions exists under certain reaction conditions. This selectivity of the noble metal catalyst may be directed or enhanced through appropriate choise of the metal, the reaction conditions, the duration of the reaction, the amount of hydrogen etc. Even the physical state of the catalyst - supported or unsupported - is of influence when using noble metal catalysts as described in this report.

  13. Annual trace-metal load estimates and flow-weighted concentrations of cadmium, lead, and zinc in the Spokane River basin, Idaho and Washington, 1999-2004

    Science.gov (United States)

    Donato, Mary M.

    2006-01-01

    Streamflow and trace-metal concentration data collected at 10 locations in the Spokane River basin of northern Idaho and eastern Washington during 1999-2004 were used as input for the U.S. Geological Survey software, LOADEST, to estimate annual loads and mean flow-weighted concentrations of total and dissolved cadmium, lead, and zinc. Cadmium composed less than 1 percent of the total metal load at all stations; lead constituted from 6 to 42 percent of the total load at stations upstream from Coeur d'Alene Lake and from 2 to 4 percent at stations downstream of the lake. Zinc composed more than 90 percent of the total metal load at 6 of the 10 stations examined in this study. Trace-metal loads were lowest at the station on Pine Creek below Amy Gulch, where the mean annual total cadmium load for 1999-2004 was 39 kilograms per year (kg/yr), the mean estimated total lead load was about 1,700 kg/yr, and the mean annual total zinc load was 14,000 kg/yr. The trace-metal loads at stations on North Fork Coeur d'Alene River at Enaville, Ninemile Creek, and Canyon Creek also were relatively low. Trace-metal loads were highest at the station at Coeur d'Alene River near Harrison. The mean annual total cadmium load was 3,400 kg/yr, the mean total lead load was 240,000 kg/yr, and the mean total zinc load was 510,000 kg/yr for 1999-2004. Trace-metal loads at the station at South Fork Coeur d'Alene River near Pinehurst and the three stations on the Spokane River downstream of Coeur d'Alene Lake also were relatively high. Differences in metal loads, particularly lead, between stations upstream and downstream of Coeur d'Alene Lake likely are due to trapping and retention of metals in lakebed sediments. LOADEST software was used to estimate loads for water years 1999-2001 for many of the same sites discussed in this report. Overall, results from this study and those from a previous study are in good agreement. Observed differences between the two studies are attributable to streamflow

  14. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab.

  15. Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988: Annual report of the metals initiative for fiscal year 1996

    International Nuclear Information System (INIS)

    1998-01-01

    This annual report has been prepared for the President and Congress describing the activities carried out under the Steel and Aluminum Energy Conservation and Technology Competitiveness Act of 1988, commonly referred to as the Metals Initiative. The Act has the following purposes: (1) increase energy efficiency and enhance the competitiveness of the American steel, aluminum, and copper industries; and (2) continue research and development efforts begun under the U.S. Department of Energy (DOE) program known as the Steel Initiative. These activities are detailed in a subsequent section. Other sections describe the appropriation history, the distribution of funds through fiscal year 1996, and the estimated funds necessary to continue projects through fiscal year 1997. The Metals Initiative supported four research and development projects with the U.S. Steel industry: (1) steel plant waste oxide recycling and resource recovery by smelting, (2) electrochemical dezincing of steel scrap, (3) rapid analysis of molten metals using laser-produced plasmas, and (4) advanced process control. There are three Metals Initiative projects with the aluminum industry: (1) evaluation of TiB2-G cathode components, (2) energy efficient pressure calciner, and (3) spray forming of aluminum. 1 tab

  16. Metal Separations and Recovery in the Mining Industry

    Science.gov (United States)

    Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

    2012-11-01

    Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

  17. De novo design of ligands for metal separation. Annual progress report, September 15, 1996 - September 14, 1997

    International Nuclear Information System (INIS)

    1997-01-01

    'The specific aim of this report is to parameterize force field to reproduce geometries and relative energetics of metal-ligand complexes for cesium, strontium, plutonium, uranium, americium and other relevent alkali, transition, lanthanide and actinide metals. As an initial attempt to examine parametrization, Dr. Yasuo Takeuchi has examined parameters for iron in combination with the molecular mechanics force field. The authors realize that most of the current ad hoc methodologies used to model metal interactions in the past do not have a firm theoretical foundation for modeling the d and f orbitals. They have, therefore, started a collaboration with Prof. Anders Carlsson of the Department of Physics to provide a theoretically correct functional form for the metal force field. Prof. Carlsson has an extensive track record in the derivation of the form of angular force fields from analysis of the quantum-mechanical electronic structure. His most important related works have treated the angular forces around transition-metal (TM) atoms in an aluminum host, the angular forces in elemental bcc transition metals, and the origins of angular and torsional forces in well-bonded s-p systems. They propose to apply the basic ideas of these calculations to developing force laws for transition metal ions in biomolecules. Of particular relevance to the proposed work is his study analyzing angular forces around transition metal (TM) atoms embedded in an aluminum host. Such TM atoms have a profound effect on the host structure, often entirely reassembling the host structure in order to satisfy the angular bonding constraints around the TM atoms. For example, at a concentration of only 1 ∼ TM to 12 ∼ Al, the transition metals Mn, Mo, Tc, W, and Re form the Al 12 W structure, in which the underlying fcc aluminum lattice is disassembled and reassembled into icosahedra which surround the transition-metal atoms. The Al 12 W structure is a body-centered cubic arrangement of such

  18. Synthesis of new water-soluble metal-binding polymers: Combinatorial chemistry approach. 1998 annual progress report

    International Nuclear Information System (INIS)

    Kurth, M.J.; Miller, R.B.; Sawan, S.; Smith, B.F.

    1998-01-01

    '(1) Develop rapid discovery and optimization approaches to new water-soluble chelating polymers for use in Polymer Filtration (PF) systems, and (2) evaluate the concept of using water and organic soluble polymers as new solid supports for combinatorial synthesis. Polymer Filtration (PF), which uses water-soluble metal-binding polymers to sequester metal ions in dilute solution with ultrafiltration (UF) to separate the polymers, is a new technology to selectively remove or recover hazardous and valuable metal ions. Future directions in PF must include rapid development, testing, and characterization of new metal-binding polymers. Thus, the authors are building upon and adapting the combinatorial chemistry approach developed for rapid molecule generation for the drug industry to the rapid development of new chelating polymers. The authors have focused on four areas including the development of: (1) synthetic procedures, (2) small ultrafiltration equipment compatible with organic- and aqueous-based combinatorial synthesis, (3) rapid assay techniques, and (4) polymer characterization techniques.'

  19. Kinetics and mechanisms of metal retention/release in geochemical processes in soil. 1997 annual progress report

    International Nuclear Information System (INIS)

    Taylor, R.W.

    1997-01-01

    'Remediation of soils polluted with heavy metals is a major challenge facing the nation. This is especially so at many DOE facilities and other superfund sites. In many cases, speciation of the metals is inaccurate and difficult and the mechanisms by which the metals are retained/released in soils over long times are poorly understood. Consequently, the long-term fate of metals in soils cannot be precisely predicted and often, the remediation recommendations and techniques that are employed to clean up soils may be ineffective or unnecessary. Accordingly, the authors are proposing work to generate basic knowledge on the kinetics and mechanism(s) of heavy metal retention/release by soil mineral colloids as affected by inorganic anion. The nature of the interaction of Cd(II), Co(II), Cr(VI), Cu(II), Ni(II) and Pb(II) with pure soil minerals and extracted soil clays will be investigated. The colloids will be characterized in terms of surface area, surface charge and surface site density. They will be used to study the effect(s) of pH, phosphate rate, and temperature on metals retention/release. The experiments will involve using various kinetic and isothermic sorption equations as models to describe the data thus acquired. The spectroscopic methods will involve using extended x-ray absorption fine structure spectroscopy (EXAFS) and Fourier Transform Infrared Spectroscopy (FTIR). The data generated from the proposed study will assist in designing better remediation strategies to effectively clean up toxic heavy metal contaminated soils at DOE facilities and other superfund sites.'

  20. Regional and inter annual patterns of heavy metals, organochlorines and stable isotopes in narwhals (Monodon monoceros) from West Greenland

    DEFF Research Database (Denmark)

    Dietz, R.; Riget, F.; Hobson, K.A.

    2004-01-01

    Samples of 150 narwhals obtained in different years from two West Greenland areas, Avanersuaq and Uummannaq, were compared for concentrations of and regional differences in heavy metals and organochlorines and stable-carbon and nitrogen isotopes. Cadmium, Hg, and Se concentrations increased....../age composition of the data. PCB and DDT concentrations in West Greenland narwhals were half those found in East Greenland and Svalbard. Stable-carbon isotope ratios in muscle of 150 narwhals showed a decreasing trend in the first year when they gradually reduced their dependency on mother's milk, after which...... between stable isotope ratios and metal and OC concentrations....

  1. The adsorption and reaction of halogenated volatile organic compounds (VOC's) on metal oxides. 1998 annual progress report

    International Nuclear Information System (INIS)

    Goodman, D.W.; Haw, J.F.; Lunsford, J.

    1998-01-01

    'The goal of the research is to elucidate the properties of the materials responsible for the activation of halocarbons and the nature of the intermediates formed in the dissociative adsorption of this class of compounds. This information is essential for interpreting and predicting stoichiometric and catalytic pathways for the safe destruction of halocarbon pollutants. The specific objectives are: (1) to study the adsorption and reactivity of chloromethanes and chloroethanes on metal oxides; (2) to identify the reaction intermediates using spectroscopic methods; and (3) to develop kinetic models for the reaction of these halocarbons with oxide surfaces. This report summarizes work after 20 months of a 36-month project. Emphasis has been placed understanding the surfaces phases, as well as the bulk phases that are present during the reactions of chlorinated hydrocarbons with strongly basic metal oxides. Most of the research has been carried out with carbon tetrachloride.'

  2. Near-Earth asteroids: Metals occurrence, extraction, and fabrication

    Science.gov (United States)

    Westfall, Richard

    Near-earth asteroids occur in three principle types of orbits: Amor, Apollo, and Aten. Amor asteroids make relatively close (within 0.3 AU) approaches to the earth's orbit, but do not actually overlap it. Apollo asteroids spend most of their time outside the earth's orbital path, but at some point of close approach to the sun, they cross the orbit of the earth. Aten asteroids are those whose orbits remain inside the earth's path for the majority of their time, with semi-major axes less than 0.1 AU. Near-earth orbit asteroids include: stones, stony-irons, irons, carbonaceous, and super-carbonaceous. Metals within these asteroids include: iron, nickel, cobalt, the platinum group, aluminum, titanium, and others. Focus is on the extraction of ferrous and platinum group metals from the stony-iron asteroids, and the iron asteroids. Extraction of the metal fraction can be accomplished through the use of tunnel-boring-machines (TBM) in the case of the stony-irons. The metals within the story-iron asteroids occur as dispersed granules, which can be separated from the stony fraction through magnetic and gaseous digestion separation techniques. The metal asteroids are processes by drilling and gaseous digestion or by gaseous digestion alone. Manufacturing of structures, housings, framing networks, pressure vessels, mirrors, and other products is accomplished through the chemical vapor deposition (CVD) of metal coating on advanced composites and on the inside of contour-defining inflatables (CDI). Metal coatings on advanced composites provide: resistance to degradation in the hostile environments of space; superior optical properties; superior heat dissipation; service as wear coatings; and service as evidential coatings. Metal coatings on the inside of CDI produce metal load-bearing products. Fibers such as graphite, kevlar, glass, ceramic, metal, etc., can be incorporated in the metal coatings on the inside of CDI producing metal matrix products which exhibit high strength

  3. High-precision analysis on annual variations of heavy metals, lead isotopes and rare earth elements in mangrove tree rings by inductively coupled plasma mass spectrometry

    International Nuclear Information System (INIS)

    Yu Kefu; Kamber, Balz S.; Lawrence, Michael G.; Greig, Alan; Zhao Jianxin

    2007-01-01

    Annual variations from 1982 to 1999 of a wide range of trace elements and reconnaissance Pb isotopes ( 207 Pb/ 206 Pb and 208 Pb/ 206 Pb) were analyzed by solution ICP-MS on digested ash from mangrove Rhizophora apiculata, obtained from Leizhou Peninsula, along northern coast of South China Sea. The concentrations of the majority of elements show a weak declining trend with growth from 1982 to 1999, punctuated by several high concentration spikes. The declining trends are positively correlated with ring width and negatively correlated with inferred water-use efficiency, suggesting a physiological control over metal-uptake in this species. The episodic metal concentration-peaks cannot be interpreted with lateral movement or growth activities and appear to be related to environmental pollution events. Pb isotope ratios for most samples plot along the 'Chinese Pb line' and clearly document the importance of gasoline Pb as a source of contaminant. Shale-normalised REE + Y patterns are relatively flat and consistent across the growth period, with all patterns showing a positive Ce anomaly and elevated Y/Ho ratio. The positive Ce anomaly is observed regardless of the choice of normaliser, in contrast to previously reported REE patterns for terrestrial and marine plants. This pilot study of trace element, REE + Y and Pb isotope distribution in mangrove tree rings indicates the potential use of mangroves as monitors of historical environmental change

  4. Removal of heavy metals and organic contaminants from aqueous streams by novel filtration methods. 1998 annual progress report

    International Nuclear Information System (INIS)

    Rodriguez, N.M.

    1998-01-01

    'Graphite nanofibers are a new type of material consisting of nanosized graphite platelets where only edges are exposed. Taking advantage of this unique configuration the authors objective is: (1) To produce graphite nanofibers with structural properties suitable for the removal of contaminants from water. (2) To test the suitability of the material in the removal of organic from aqueous solutions. (3) To determine the ability of the nanofibers to function as an electrochemical separation medium the selective removal of metal contaminants from solutions. This report summarizes work after 1.5 of a 3-year project. During this period, efforts have been concentrated on the production, characterization and optimization of graphite nanofibers (GNF). This novel material has been developed in the laboratory from the metal catalyzed decomposition of certain hydrocarbons (1). The structures possess a cross-sectional area that varies between 5 to 100 nm and have lengths ranging from 5 to 100 mm (2). High-resolution transmission electron microscopy studies have revealed that the nanofibers consist of extremely well-ordered graphite platelets, which are oriented in various directions with respect to the fiber axis (3). The arrangement of the graphene layers can be tailored to a desired geometry by choice of the correct catalyst system and reaction conditions, and it is therefore possible to generate structures where the layers are stacked in a ribbon, herring-bone, or stacked orientation. The research has been directed on two fronts: (a) the use of the material for the removal of organic contaminants, and (b) taking advantage of the high electrical conductivity as well as high surface area of the material to use it as electrode for the electrochemical removal of metal pollutants from aqueous streams.'

  5. Refining technology for the recycling of stainless steel radioactive scrap metals, FY 94 bi-annual report

    International Nuclear Information System (INIS)

    Mizia, R.E.; Atteridge, D.G.; Buckentin, J.; Carter, J.; Davis, H.L.; Devletian, J.H.; Scholl, M.R.; Turpin, R.B.; Webster, S.L.

    1994-08-01

    The research addressed under this project is the recycling of metallic nuclear-related by-product materials under the direction of Westinghouse Idaho Nuclear Company (WINCO). The program addresses the recycling of radioactive scrap metals (RSM) for beneficial re-use within the DOE complex; in particular, this program addresses the recycling of stainless steel RSM. It is anticipated that various stainless steel components under WINCO control at the Idaho Falls Engineering Laboratory (INEL), such as fuel pool criticality barriers and fuel storage racks will begin to be recycled in FY94-95. The end product of this recycling effort is expected to be waste and overpack canisters for densified high level waste for the Idaho Waste Immobilization Facility and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific components of this problem area that are presently being, or have been, addressed by CAAMSEC are: (1) the melting/remelting of stainless steel RSM into billet form; (2) the melting/remelting initial research focus will be on the use of radioactive surrogates to study; (3) the cost effectiveness of RSM processing oriented towards privatization of RSM reuse and/or resale. Other components of this problem that may be addressed under program extension are: (4) the melting/remelting of carbon steel; (5) the processing of billet material into product form which shall meet all applicable ASTM requirements; and, (6) the fabrication of an actual prototypical product; the present concept of an end product is a low carbon Type 304/316 stainless steel cylindrical container for densified and/or vitrified high level radioactive waste and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific work reported herein covers the melting/remelting of stainless steel open-quotes scrapclose quotes metal into billet form and the study of surrogate material removal effectiveness by various remelting techniques

  6. First Annual Progress Report on Transmission of Information by Acoustic Communication along Metal Pathways in Nuclear Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Heifetz, A. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Bakhtiari, S. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Huang, X. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Ponciroli, R. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Vilim, R. B. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division

    2017-09-30

    The objective of this project is to develop and demonstrate methods for transmission of information in nuclear facilities by acoustic means along existing in-place metal piping infrastructure. Pipes are omnipresent in a nuclear facility, and penetrate enclosures and partitions, such as the containment building wall. In the envisioned acoustic communication (AC) system, packets of information will be transmitted as guided acoustic waves along pipes. Performance of AC hardware and network protocols for efficient and secure communications under development in this project will be eventually evaluated in a representative nuclear power plant environment. Research efforts in the first year of this project have been focused on identification of appropriate transducers, and evaluation of their performance for information transmission along nuclear-grade metallic pipes. COMSOL computer simulations were performed to study acoustic wave generation, propagation, and attenuation on pipes. An experimental benchtop system was used to evaluate signal attenuation and spectral dispersion using piezo-electric transducers (PZTs) and electromagnetic acoustic transducers (EMATs). Communication protocols under evaluation consisted on-off keying (OOK) signal modulation, in particular amplitude shift keying (ASK) and phase shift keying (PSK). Tradeoffs between signal power and communication data rate were considered for ASK and PSK coding schemes.

  7. BAM - Annual report 1975

    International Nuclear Information System (INIS)

    1976-06-01

    The annual report contains progress and activity reports of the presidential department, the departments metals and metal construction, civil engineering and building activities, organic matter, chemical safety engineering, special fields of materials testing, techniques independent of the type of material, an index, as well as general and statistic statements. (HK) [de

  8. Kinetics and mechanisms of metal retention/release in geochemical processes in soil. 1998 annual progress report

    International Nuclear Information System (INIS)

    Taylor, R.W.

    1998-01-01

    'The long-term fate of toxic metals in soils cannot be precisely predicted, and often remediation recommendations and techniques may be ineffective or unnecessary. This work will generate basic knowledge on the kinetics and mechanism(s) of heavy metal retention/release by soil mineral colloids. The information should assist in improving remediation strategies for toxic heavy metal contaminated soils. The objectives are: (1) To determine the effects of residence time on the mechanisms of Cr(VI), Cu(II), Co(II), Cd(II), Pb(II), and Ni(II) sorption/release on Fe and Al oxide and clay mineral surfaces using kinetic studies coupled to extended x-ray absorption fine structure (EXAFS) spectroscopy and fourier transform infrared (FTIR) spectroscopy. (2) To study the effect of temperature, pH, and phosphate on metal sorption by oxides, and derive thermodynamic parameters to describe the sorption process. As of June, 16, 1997 several clay minerals were tested for their efficiency of removing Cr from aqueous systems. The materials tested--smectite, vermiculites, illites, and kaolinite--represent the natural clay minerals that are abundant in soils and sediments. The clays were used in either their original or reduced (reduced with sodium dithionite) forms. The experimental result indicate that the reduced clays acted as an efficient remover of Cr(VI) from an aqueous system. The XANES spectra of Cr-treated clays provided evidence that the clays reduced Cr(VI) to Cr(III) and immobilized Cr in the clays at the same time. Sodium dithionite applied directly into aqueous systems reduced Cr(VI) to Cr(III), but could not immobilize Cr even in the presence of the clays. The Cr(VI) removal capacity varied with the clay mineral type and the structural Fe content. For the clays used in this study, the removal capacity follows the orders of smectites > vermiculites and illites > kaolinite. Within the same type of clay minerals, reduction of Cr(VI) is highly related to the ferrous iron

  9. Assessment of annual air pollution levels with PM1, PM2.5, PM10 and associated heavy metals in Algiers, Algeria.

    Science.gov (United States)

    Talbi, Abdelhamid; Kerchich, Yacine; Kerbachi, Rabah; Boughedaoui, Ménouèr

    2018-01-01

    Concentrations of particulate matter less than 1  μm, 2.5  μm, 10 μm and their contents of heavy metals were investigated in two different stations, urban and roadside at Algiers (Algeria). Sampling was conducted during two years by a high volume samplers (HVS) equipped with a cascade impactor at four levels stage, for one year sampling. The characterization of the heavy metals associated to the particulate matter (PM) was carried out by X-Ray Fluorescence analysis (XRF). The annual average concentration of PM 1 , PM 2.5 and PM 10 in both stations were 18.24, 32.23 and 60.01 μg m -3 respectively. The PM 1 , PM 2.5 and PM 10 concentrations in roadside varied from 13.46 to 25.59 μg m -3 , 20.82-49.85 μg m -3 and 45.90-77.23 μg m -3 respectively. However in the urban station, the PM 1 , PM 2.5 and PM 10 concentrations varied from 10.45 to 26.24 μg m -3 , 18.53-47.58 μg m -3 and 43.8-91.62 μg m -3 . The heavy metals associated to the PM were confirmed by Scanning Electron Microscopy-Energy Dispersive X-Ray analyses (SEM-EDX). The different spots of PM 2.5 analysis by SEM-EDX shows the presence of nineteen elements with anthropogenic and natural origins, within the heavy metal detected, the lead was found with maximum of 5% (weight percent). In order to determine the source contributions of PM levels at the two sampling sites sampling, principal compound analysis (PCA) was applied to the collected data. Statistical analysis confirmed anthropogenic source with traffic being a significant source and high contribution of natural emissions. At both sites, the PM 2.5 /PM 10 ratio is lower than that usually recorded in developed countries. The study of the back-trajectories of the air masses starting from Sahara shows that desert dust influences the concentration and the composition of the PM measured in Algiers. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Removal of metallic and organic contaminants from aqueous streams by novel filtration methods. 1997 annual progress report

    International Nuclear Information System (INIS)

    Rodriguez, N.M.

    1997-01-01

    'Graphite nanofibers, are a novel material that has been developed in the laboratory from the metal catalyzed decomposition of certain hydrocarbons (1). These structures possess a cross-sectional area that varies between 5 to 100 nm and have lengths ranging from 5 to 100 mm (2). High-resolution transmission electron microscopy studies have revealed that the nanofibers consist of extremely well-ordered graphite platelets (3), which are oriented in various directions with respect to the fiber axis. The arrangement of the graphene layers can be tailored to a desired geometry by choice of the correct catalyst system and reaction conditions, and it is therefore possible to generate structures where the layers are stacked in a ribbon, herring-bone, or stacked orientation. An example of the later structure is shown in the high resolution electron micrograph, Figure 1a, where the lines across correspond to individual planes of graphite that are separated at a minimum distance of 0.34 nm. The structural features of the nanofiber can be better appreciated in the schematic renditions, Figures 1b and 1c. The unique combination of small cross-sectional area, which is estimated to be on average 20 nm, and the abundance of exposed edges makes the material an ideal solid for adsorption. The suitability of the material for the selective adsorption of a variety of molecules is illustrated in Figure 1c, where it can be seen that adsorption could be achieved upon access of the molecule to the inner regions of the solid. One the most outstanding features of graphite nanofibers, is that the solid consists entirely of non-rigid wall nanopores that extend across the entire solid. The process for the synthesis of graphite nanofibers produced from the decomposition of hydrocarbons and carbon monoxide over selected metal surfaces at temperatures over the range 450 to 700 C has been optimized and it is possible to produce relatively large quantities of high purity material in short periods of

  11. FY05 HPCRM Annual Report: High-Performance Corrosion-Resistant Iron-Based Amorphous Metal Coatings

    International Nuclear Information System (INIS)

    Farmer, J; Choi, J; Haslam, J; Day, S; Yang, N; Headley, T; Lucadamo, G; Yio, J; Chames, J; Gardea, A; Clift, M; Blue, G; Peters, W; Rivard, J; Harper, D; Swank, D; Bayles, R; Lemieux, E; Brown, R; Wolejsza, T; Aprigliano, L; Branagan, D; Marshall, M; Meacham, B; Aprigliano, L; Branagan, D; Marshall, M; Meacham, B; Lavernia, E; Schoenung, J; Ajdelsztajn, L; Dannenberg, J; Graeve, O; Lewandowski, J; Perepezko, J; Hildal, K; Kaufman, L; Boudreau, J

    2007-01-01

    New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be difficult to pneumatically convey during thermal spray deposition. Gas atomized SAM1651 powder has required cryogenic milling to eliminate irregularities that make flow difficult. SAM2X5 (no yttrium) has a high critical cooling rate, which has caused problems associated with devitrification. SAM2X5 can be gas atomized to produce spherical powders of SAM2X5, which enable more facile thermal spray deposition. The reference material, nickel-based Alloy C-22, is an outstanding corrosion-resistant engineering material. Even so, crevice corrosion has been observed with C-22 in hot sodium chloride environments without buffer

  12. FY05 HPCRM Annual Report: High-Performance Corrosion-Resistant Iron-Based Amorphous Metal Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J; Choi, J; Haslam, J; Day, S; Yang, N; Headley, T; Lucadamo, G; Yio, J; Chames, J; Gardea, A; Clift, M; Blue, G; Peters, W; Rivard, J; Harper, D; Swank, D; Bayles, R; Lemieux, E; Brown, R; Wolejsza, T; Aprigliano, L; Branagan, D; Marshall, M; Meacham, B; Aprigliano, L; Branagan, D; Marshall, M; Meacham, B; Lavernia, E; Schoenung, J; Ajdelsztajn, L; Dannenberg, J; Graeve, O; Lewandowski, J; Perepezko, J; Hildal, K; Kaufman, L; Boudreau, J

    2007-09-20

    New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be difficult to pneumatically convey during thermal spray deposition. Gas atomized SAM1651 powder has required cryogenic milling to eliminate irregularities that make flow difficult. SAM2X5 (no yttrium) has a high critical cooling rate, which has caused problems associated with devitrification. SAM2X5 can be gas atomized to produce spherical powders of SAM2X5, which enable more facile thermal spray deposition. The reference material, nickel-based Alloy C-22, is an outstanding corrosion-resistant engineering material. Even so, crevice corrosion has been observed with C-22 in hot sodium chloride environments without buffer

  13. Experimental determination of contaminant metal mobility as a function of temperature, time and solution chemistry. 1997 annual progress report

    International Nuclear Information System (INIS)

    Bruton, C.; Carroll, S.; O'Day, P.; Sahai, N.

    1997-01-01

    'Strontium is significantly more mobile than other hazardous radioactive metals. Its partitioning between aqueous and solid phases is controlled by reactions that occur at the interface between natural waters and minerals. At a groundwater site in Hanford (200-BP-5), the aerial extent of the 90 Sr plume is 100 times larger than the aerial extent of the 137 Cs and the 239 Pu plumes. Similarly, contaminated, perched watertables at INEL have much higher aqueous concentrations of 90 Sr than 137 Cs, presumably because Cs is preferentially sorbed to solids (Duncan 1995). Under high physical flow conditions, such as those in the highly fractured rock at Hanford and INEL, 90 Sr present in plumes may spread off-site and cause contamination of aquifers or other water sources. Geochemical factors that may contribute to the overall mobility of Sr in natural waters are the solubilities of phases such as strontianite (SrCO 3 ) and formation of strong complexes with sulfate and nitrate. Although 90 Sr is mobilized in natural waters in these examples, significant concentrations may also be present in solid phases. Sorption experiments using a wide variety of substrates at room temperature have shown that Sr is removed from solution under certain conditions. Additionally, strontianite (SrCO 3 ) may precipitate at low Sr concentrations in the pH range of waters in contact with basaltic rocks, which varies between pH 8 and 10. Waters contain variable amounts of carbonate owing to atmospheric interactions; the partial pressure of CO 2 is about 10 x 3.5 atm in air and commonly as high as 10 x 2.5 atm in soils. The objective of this work is to determine the fundamental data needed to predict the behavior of strontium at temperature and time scales appropriate to thermal remediation. The authors approach combines macroscopic sorption/precipitation and desorption/dissolution kinetic experiments, which track changes in solution composition, with direct molecular characterization of

  14. Metal-Based Systems for Molecular Imaging Applications - COST D38 Annual Workshop - Scientific Program and Abstracts

    International Nuclear Information System (INIS)

    Mikolajczak, R.

    2009-01-01

    The main objective of the Action is the development of metal-based imaging probes for cellular and molecular imaging applications, based on MRI, PET, SPECT and optical imaging that will facilitate early diagnosis, assessment of disease progression and treatment evaluation.The goal of this Action is to further the development of innovative imaging probes through the pursuit of innovations in a number of different areas, ranging from the design of imaging units endowed with enhanced sensitivity to the control of the structural and electronic determinants responsible for the molecular recognition of the target molecule.At present, in vivo diagnostic systems basically assess the structure and function of human organs. Therefore, for important diseases such as cancer and cardiovascular pathologies,and also diseases of the central nervous system, only the late symptoms are detected. It is expected that the advances in genomics and proteomics will have a tremendous impact on human health care of the future. However, advances in molecular biology are already redefining diseases in terms of molecular abnormalities. With this knowledge, new generations of diagnostic imaging agents can be defined that aim at the detection of those molecular processes in vivo.The molecular imaging approach offers a great potential for earlier detection and characterisation of disease, and evaluation of treatment. However, more research is necessary to bring these ideas to clinical applications and a key aspect relates to the development of high-specificity, high-sensitivity imaging probes for the different detection modalities. Additionally, the Action includes research activities dealing with the exploitation of peculiar nuclear properties of given isotopes for therapeutic effects, thus integrating the diagnostic and the therapeutic stages.Apart from its use in early diagnosis in clinical practice, the molecular imaging approach will have also a major impact on the development of new

  15. Facile solid-state synthesis of oxidation-resistant metal nanoparticles at ambient conditions

    Science.gov (United States)

    Lee, Kyu Hyung; Jung, Hyuk Joon; Lee, Ju Hee; Kim, Kyungtae; Lee, Byeongno; Nam, Dohyun; Kim, Chung Man; Jung, Myung-Hwa; Hur, Nam Hwi

    2018-05-01

    A simple and scalable method for the synthesis of metal nanoparticles in the solid-state was developed, which can produce nanoparticles in the absence of solvents. Nanoparticles of coinage metals were synthesized by grinding solid hydrazine and the metal precursors in their acetates and oxides at 25 °C. The silver and gold acetates converted completely within 6 min into Ag and Au nanoparticles, respectively, while complete conversion of the copper acetate to the Cu sub-micrometer particles took about 2 h. Metal oxide precursors were also converted into metal nanoparticles by grinding alone. The resulting particles exhibit distinctive crystalline lattice fringes, indicating the formation of highly crystalline phases. The Cu sub-micrometer particles are better resistant to oxidation and exhibit higher conductivity compared to conventional Cu nanoparticles. This solid-state method was also applied for the synthesis of platinum group metals and intermetallic Cu3Au, which can be further extended to synthesize other metal nanoparticles.

  16. Platinum group elements geochemistry of ultramafic and associated ...

    Indian Academy of Sciences (India)

    group element (PGE) and associated gold mineralization in these ultramafic rocks. A mineral ... Paleoproterozoic age, mostly emplaced into the .... tified reference materials (CRM) from the US Geo- ..... Classification diagram (Barnes et al.

  17. Platinum group elements and gold in ferromanganese crusts from ...

    Indian Academy of Sciences (India)

    The strong enrichment of Pt (up to 1 ppm) relative to the other PGE and its pos- itive correlations with ... around Late Miocene as indicated by the contin- uous growth of ...... 198. 331–351. Koschinsky A and Halbach P 1995 Sequential leaching.

  18. Dissolution of Metal Supported Spent Auto Catalysts in Acids

    Directory of Open Access Journals (Sweden)

    Fornalczyk A.

    2016-03-01

    Full Text Available Metal supported auto catalysts, have been used in sports and racing cars initially, but nowadays their application systematically increases. In Metal Substrate (supported Converters (MSC, catalytic functions are performed by the Platinum Group Metals (PGM: Pt, Pd, Rh, similarly to the catalysts on ceramic carriers. The contents of these metals make that spent catalytic converters are valuable source of precious metals. All over the world there are many methods for the metals recovery from the ceramic carriers, however, the issue of platinum recovery from metal supported catalysts has not been studied sufficiently yet. The paper presents preliminary results of dissolution of spent automotive catalyst on a metal carrier by means of acids: H2SO4, HCl, HNO3, H3PO4. The main assumption of the research was the dissolution of base metals (Fe, Cr, Al from metallic carrier of catalyst, avoiding dissolution of PGMs. Dissolution was the most effective when concentrated hydrochloric acid, and 2M sulfuric acid (VI was used. It was observed that the dust, remaining after leaching, contained platinum in the level of 0.8% and 0.7%, respectively.

  19. Dispersion of Metals from Abandoned Mines and their Effects on Biota in the Methow River, Okanogan County, Washington : Annual Report 3/15/00-3/14/01.

    Energy Technology Data Exchange (ETDEWEB)

    Peplow, Dan; Edmonds, Robert

    2001-06-01

    The University of Washington, College of Forest Resources and the Center for Streamside Studies in Seattle, Washington, is being funded by the Bonneville Power Administration to conduct a three-year research project to measure the watershed scale response of stream habitat to abandoned mine waste, the dispersion of metals, and their effects on biota in the Methow River basin. The purpose of this project is to determine if there are processes and pathways that result in the dispersion of metals from their source at abandoned mines to biological receptors in the Methow River. The objectives of this study are the following: (1) Assess ecological risk due to metal contamination from mines near the Methow; (2) Measure impact of metals from mines on groundwater and sediments in Methow River; (3) Measure response of organisms in the Methow River to excess metals in the sediments of the Methow River; (4) Recommend restoration guidelines and biological goals that target identified pathways and processes of metal pollution affecting salmon habitat in the Methow basin; and (5) Submit peer review journal publications. When concluded, this study will contribute to the advancement of current best management practices by describing the processes responsible for the release of metals from small abandoned mine sites in an arid environment, their dispersal pathways, and their chemical and biological impacts on the Methow River. Based on these processes and pathways, specific remediation recommendations will be proposed.

  20. Structural biology of the sequestration and transport of heavy metal toxins: NMR structure determination of proteins containing the -Cys-X-Y-Cys-metal binding motifs. 1997 annual progress report

    International Nuclear Information System (INIS)

    Opella, S.J.

    1997-01-01

    'There are enormous amounts of heavy metals in the environment, much of it in the form of organometallic compounds resulting from various types of industrial and military waste. Nearly all of these metals and compounds are highly toxic to biological organisms including humans. However, some bacteria thrive in the presence of high concentrations of heavy metal toxins because they possess efficient mechanisms for the detoxification of these metals and compounds. Heavy metals appear to be universally toxic because of their non-selective chemistry, for example Hg(II) reacts with essentially all exposed sulfhydryl groups on proteins, thus, it may seem surprising that any organism at all can survive these chemical insults much less those that grow in a toxic milieu. However, the prebiotic environment was undoubtedly heavily polluted with heavy metals from geological processes, and the most primitive organisms simply had to evolve mechanisms for dealing with them if they were going to be able to utilize Cys, His, and the other amino acids that contribute to metal binding sites in their proteins. Genes associated with bacterial resistance to Ag, AsO 2 , AsO 4 , Bi, Cd, Co, CrO 4 , Cu, Hg, iNi, TeO 3 , TI, Pb, Zn, and other metals of environmental concern have been described (Silver, 1992; Silver and Walderhaug, 1995).'

  1. Extraction and recovery of mercury and lead from aqueous waste streams using redox-active layered metal chalcogenides. Annual progress report, September 15, 1996 - September 14, 1997

    International Nuclear Information System (INIS)

    Dorhout, P.K.; Strauss, S.H.

    1997-01-01

    'The authors have begun to examine the extraction and recovery of heavy elements from aqueous waste streams using redox-active metal chalcogenides. They have been able to prepare extractants from known chalcogenide starting materials, studied the efficacy of the extractants for selective removal of soft metal ions from aqueous phases, studied the deactivation of extractants and the concomitant recovery of soft metal ions from the extractants, and characterized all of the solids and solutions thus far in the study. The study was proposed as two parallel tasks: Part 1 and Part 2 emphasize the study and development of known metal chalcogenide extractants and the synthesis and development of new metal chalcogenide extractants, respectively. The two tasks were divided into sub-sections that study the extractants and their chemistry as detailed below: Preparation and reactivity of metal chalcogenide host solids Extraction of target waste (guest) ions from simulated waste streams Examination of the guest-host solids recovery of the guest metal and reuse of extractant Each section of the two tasks was divided into focused subsections that detail the specific problems and solutions to those problems that were proposed. The extent to which those tasks have been accomplished and the continued efforts of the team are described in detail below. (b) Progress and Results. The DOE-supported research has proceeded largely as proposed and has been productive in its first 12 months. Two full-paper manuscripts were submitted and are currently under peer review. A third paper is in preparation and will be submitted shortly. In addition, 5 submitted or invited presentations have been made.'

  2. Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

    Energy Technology Data Exchange (ETDEWEB)

    Gallagher, Frank J. [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States); Pechmann, Ildiko [Department of Biological Sciences, Rutgers, State University, 113 University Avenue, Newark, NJ 07102 (United States)], E-mail: pildiko@andromeda.rutgers.edu; Bogden, John D. [Department of Preventive Medicine and Community Health, University of Medicine and Dentistry of New Jersey - N. J. Medical School, P.O. Box 1709, Newark, NJ 07101-1709 (United States); Grabosky, Jason [Urban Forestry Program, Department of Ecology, Evolution and Natural Resources, Rutgers, State University, 14 College Farm Road, New Brunswick, NJ 08901-8551 (United States); Weis, Peddrick [Department of Radiology, University of Medicine and Dentistry of New Jersey - N. J. Medical School, P.O. Box 1709, Newark, NJ 07101-1709 (United States)

    2008-12-15

    A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load. - Ecosystem function as measured by plant production is impaired at a critical soil metal load (TML above 3) in northern hardwood assemblages growing in a metal-contaminated brownfield.

  3. Soil metal concentrations and productivity of Betula populifolia (gray birch) as measured by field spectrometry and incremental annual growth in an abandoned urban Brownfield in New Jersey

    International Nuclear Information System (INIS)

    Gallagher, Frank J.; Pechmann, Ildiko; Bogden, John D.; Grabosky, Jason; Weis, Peddrick

    2008-01-01

    A forested brownfield within Liberty State Park, Jersey City, New Jersey, USA, has soils with arsenic, chromium, lead, zinc and vanadium at concentrations above those considered ambient for the area. Using both satellite imagery and field spectral measurements, this study examines plant productivity at the assemblage and individual specimen level. Longer term growth trends (basal area increase in tree cores) were also studied. Leaf chlorophyll content within the hardwood assemblage showed a threshold model for metal tolerance, decreasing significantly beyond a soil total metal load (TML) of 3.0. Biomass production (calculated with RG - Red/Green Ratio Index) in Betula populifolia (gray birch), the co-dominant tree species, had an inverse relationship with the Zn concentration in leaf tissue during the growing season. Growth of B. populifolia exhibited a significant relationship with TML. Assemblage level NDVI and individual tree NDVI also had significant decreases with increasing TML. Ecosystem function measured as plant production is impaired at a critical soil metal load. - Ecosystem function as measured by plant production is impaired at a critical soil metal load (TML above 3) in northern hardwood assemblages growing in a metal-contaminated brownfield

  4. Technical committee meeting on Liquid Metal Fast Reactor (LMFR) developments. 33rd annual meeting of the International Working Group on Fast Reactors (IWG-FR). Working material

    International Nuclear Information System (INIS)

    2000-01-01

    Over the past 33 years, the IAEA has actively encouraged and advocated international cooperation in fast reactor technology. The present publication contains information on the status of fast reactor development and on worldwide activities in this advanced nuclear power technology during 1999/2000, as reported at the 33. annual meeting of the International Working Group on Fast Reactors. It is intended to provide information regarding the current status of LMFR development in IAEA Member States

  5. Spectroscopy, modeling and computation of metal chelate solubility in supercritical CO2. Annual progress report, September 15, 1996 - September 14, 1997

    International Nuclear Information System (INIS)

    Brennecke, J.F.; Chateauneuf, J.E.; Stadtherr, M.A.

    1997-01-01

    'This progress report contains (1) a statement of the objectives of the overall project, (2) a discussion of the results obtained during the first year of the three year grant period, (3) a summary, (4) a description of the future work that will be pursued during the next year, and (5) accounting information. This is followed by the literature cited and the pertinent tables and figures. The overall objectives of this project are to gain a fundamental understanding of the solubility and stability of metal chelates in supercritical CO 2 . Extraction with CO 2 is a excellent way to remove organic compounds from soils, sludges and aqueous solutions and recent research has demonstrated that together with chelating agents it is a viable way to remove metals, as well. The authors seek to gain fundamental knowledge that is vital to computing phase behavior, and modeling and designing processes using CO 2 to separate organics and metal compounds from DOE mixed wastes. The overall program is a comprehensive one to measure local solvation of metal chelates and to determine metal chelate stability in supercritical fluid mixtures using UV-vis and FTIR spectroscopy. The spectroscopic studies provide information on the solution microstructure, which they are using in concert with their own and published solubility data to evaluate and develop thermodynamic models of the solubility behavior. Finally, they are implementing a more reliable computational technique, based on interval mathematics, to compute the phase equilibria using the thermodynamic models. This fundamental information about metal chelate stability and solubility in supercritical CO 2 is important in the design of processes using CO 2 to extract components from mixed wastes and in determining the optimum operating conditions.'

  6. Methods for recovering precious metals from industrial waste

    Science.gov (United States)

    Canda, L.; Heput, T.; Ardelean, E.

    2016-02-01

    The accelerated rate of industrialization increases the demand for precious metals, while high quality natural resources are diminished quantitatively, with significant operating costs. Precious metals recovery can be successfully made from waste, considered to be secondary sources of raw material. In recent years, concerns and interest of researchers for more increasing efficient methods to recover these metals, taking into account the more severe environmental protection legislation. Precious metals are used in a wide range of applications, both in electronic and communications equipment, spacecraft and jet aircraft engines and for mobile phones or catalytic converters. The most commonly recovered precious metals are: gold from jewellery and electronics, silver from X- ray films and photographic emulsions, industrial applications (catalysts, batteries, glass/mirrors), jewellery; platinum group metals from catalytic converters, catalysts for the refining of crude oil, industrial catalysts, nitric acid manufacturing plant, the carbon-based catalyst, e-waste. An important aspect is the economic viability of recycling processes related to complex waste flows. Hydrometallurgical and pyrometallurgical routes are the most important ways of processing electrical and electronic equipment waste. The necessity of recovering precious metals has opened new opportunities for future research.

  7. Sorption of heavy metals and radionuclides on mineral surfaces in the presence of organic co-contaminants. 1997 annual progress report

    International Nuclear Information System (INIS)

    Leckie, J.; Redden, G.

    1997-01-01

    'This project fits well within the overall objectives established by the Environmental Management and Science Program to promote long-term basic research that will provide the tools for more effective and lower cost remediation efforts at DOE sites where hazardous and radioactive wastes or contamination zones are present. In order to develop the necessary remediation technology it has been recognized that a fundamental understanding of the various chemical and physical factors associated with waste treatment and contaminant transport must be established. Some of the specific topics include waste pretreatment, volume reduction, immobilization, separation methods, the interactions of actinides and heavy metals with surfaces in the presence of organic residues and co-contaminants, contaminant transport in the environment, and long-term storage site assessment. This project has direct and potential application in all these areas. The interaction and partitioning of contaminant metals and radionuclides between solution and solid- surface phases is a fundamental issue for waste treatment and predicting contaminant transport in the environment. Many factors are involved in the functional relationships describing chemical reactivity and physical distribution of chemical species. These include modification of chemical behavior by the suite of chemical co-contaminants in a system. Organic complexing agents are common components of waste mixtures and include both synthetic components specifically introduced as part of processing methods, and poorly characterized compounds that were introduced separately or evolved within the highly reactive wastes. Natural organic complexing agents such as citric acid and siderophores are common in nature and represent factors that will further influence contaminant transport in soils and aquatic systems. Knowledge of the existence of a metal-organic complex cannot automatically be used to predict changes in solid-solution partitioning of the

  8. In-situ spectro-electrochemical studies of radionuclide contaminated surface films on metals and the mechanism of their formation and dissolution. 1998 annual progress report

    International Nuclear Information System (INIS)

    Melendres, C.A.; Mini, S.M.

    1998-01-01

    'The objective of this research program is to gain a fundamental understanding of the structure, composition, and mechanism of formation of radionuclide-containing surface films on metals that are relevant to the problem of decontamination of piping systems and waste storage tanks at DOE nuclear processing facilities. As of May 1998, after about a year and a half of work towards implementing this project, considerable progress has been made in understanding the mechanism and structure of heavy metal ions incorporated into simulated corrosion films of nickel. The nature of iron and chromium oxide films, which are used to model the other components of steels used in piping systems and waste storage tanks in nuclear facilities, has also been elucidated. The principal techniques used in these investigations consist of coupled electrochemical and in-situ synchrotron X-ray absorption spectroscopy, as well as vibrational spectroscopy (infrared and laser Raman).'

  9. Development of a low loss magnetic composite utilizing amorphous metal flake. Third semi-annual progress report, 19 September 1979-18 March 1980

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, L.

    1980-04-01

    The objective of this project is to determine the feasibility of casting amorphous metal ribbon in the shape of a helix with properties suitable for motor applications. The tasks include (1) determination of the casting parameters required to produce a helical ribbon, (2) evaluation of magnetic properties and methods for bonding, and (3) developing methods for patterning a wheel for producing motor slots in as-cast ribbon.

  10. FY05 HPCRM Annual Report: High-Performance Corrosion-Resistant Iron-Based Amorphous Metal Coatings Evaluation of Corrosion Resistance FY05 HPCRM Annual Report No. Rev. 1DOE-DARPA Co-Sponsored Advanced Materials Program

    International Nuclear Information System (INIS)

    Farmer, J C; Haslam, J J; Day, S D

    2007-01-01

    New corrosion-resistant, iron-based amorphous metals have been identified from published data or developed through combinatorial synthesis, and tested to determine their relative corrosion resistance. Many of these materials can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in some very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Two Fe-based amorphous metal formulations have been found that appear to have corrosion resistance comparable to, or better than that of Ni-based Alloy C-22, based on breakdown potential and corrosion rate. Both Cr and Mo provide corrosion resistance, B enables glass formation, and Y lowers critical cooling rate (CCR). SAM1651 has yttrium added, and has a nominal critical cooling rate of only 80 Kelvin per second, while SAM2X7 (similar to SAM2X5) has no yttrium, and a relatively high critical cooling rate of 610 Kelvin per second. Both amorphous metal formulations have strengths and weaknesses. SAM1651 (yttrium added) has a low critical cooling rate (CCR), which enables it to be rendered as a completely amorphous thermal spray coating. Unfortunately, it is relatively difficult to atomize, with powders being irregular in shape. This causes the powder to be difficult to pneumatically convey during thermal spray deposition. Gas atomized SAM1651 powder has required cryogenic milling to eliminate irregularities that make flow difficult. SAM2X5 (no yttrium) has a high critical cooling rate, which has caused problems associated with devitrification. SAM2X5 can be gas atomized to produce spherical powders of SAM2X5, which enable more facile thermal spray deposition. The reference material, nickel-based Alloy C-22, is an outstanding corrosion-resistant engineering material. Even so, crevice corrosion has been observed with C-22 in hot sodium chloride environments without buffer

  11. Analytical chemical system for the determination of heavy metals and organic compounds. Annual progress report, December 1, 1978-November 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Siggia, S.; Barnes, R.M.

    1979-10-24

    Progress has been made in the synthesis and characterization of new resins for sequestering inorganic and organic compounds. The capabilities of the poly(dithiocarbamate) resin have been extended, a new poly(acrylamidoxime) resin prepared and characterized, and a series of resins for organic compounds prepared and tested. Limited actual sample analyses have been performed with these resins. A new inductively coupled plasma source, spectrometer, and computer system have been received and they are undergoing tests and installation. With this system in place, the multielement analysis of metals during the forthcoming period will insure the application of sequestering resins to practical analysis of energy-related materials. An automated sample handling and data system has been designed, some components purchased, and construction is scheduled for 1980.

  12. Analytical chemical system for the determination of heavy metals and organic compounds. Annual progress report, December 1, 1978-November 30, 1979

    International Nuclear Information System (INIS)

    Siggia, S.; Barnes, R.M.

    1979-01-01

    Progress has been made in the synthesis and characterization of new resins for sequestering inorganic and organic compounds. The capabilities of the poly(dithiocarbamate) resin have been extended, a new poly(acrylamidoxime) resin prepared and characterized, and a series of resins for organic compounds prepared and tested. Limited actual sample analyses have been performed with these resins. A new inductively coupled plasma source, spectrometer, and computer system have been received and they are undergoing tests and installation. With this system in place, the multielement analysis of metals during the forthcoming period will insure the application of sequestering resins to practical analysis of energy-related materials. An automated sample handling and data system has been designed, some components purchased, and construction is scheduled for 1980

  13. Acidification and heavy metal contamination in the border area Norway/Russia. Annual report 1995; Forsuring og tungmetallforurensning i grenseomraadene Norge/Russland. Aarsrapport for 1995

    Energy Technology Data Exchange (ETDEWEB)

    Traaen, T.S.; Rognerud, S.

    1996-12-31

    According to this report, water-chemical monitoring of lakes in Southern Varanger has in recent years shown a marked decrease in the concentrations of sulphate and labile aluminium and increasing pH and ANC. The reason is that the reduced emission from the Pechenga-Nikel Company in Russia has led to less sulphur deposition in Norway. It is found that the water quality in the lakes in the area rapidly improves when the sulphur deposition decreases. There is no clear evidence for changes in the concentrations of nickel and copper in the lakes. The concentrations of Ni and Cu in lake sediments and in soil will probably be increasing steadily and the heavy metal contamination should be continuously monitored. 16 refs., 9 figs., 6 tabs.

  14. In-situ spectroelectrochemical studies of radionuclide- contaminated surface films on metals and the mechanism of their formation and dissolution. 1997 annual progress report

    International Nuclear Information System (INIS)

    Balasubramanian, M.; Mansour, A.N.; Melendres, C.A.; Mini, S.; Papapanayiotou, D.

    1997-01-01

    'The incorporation of radioactive contaminants into corrosion product scales on metals is being investigated using in-situ spectroscopic and electrochemical techniques. To facilitate the study, stable isotopes are used initially, while the corrosion films are simulated by electrodeposition of the appropriate oxide (hydroxide) onto a graphite substrate. Synchrotron x-ray absorption spectroscopy (XAS) is used to determine the structure and composition of the host oxide film, as well as the local structure of the impurity ion. Results on the incorporation of Sr and Ce into surface films of Ni(OH) 2 and NiOOH are reported. Cathodically deposited Ni(OH) 2 was found to be mainly in the α form while anodically prepared NiOOH consists of Ni +2 and Ni +4 phases. Sr in the films consists mainly of Sr 2+ which appears to be coordinated to oxygen atoms and is likely to exist as small domains of co-precipitated material. Ce in Ni(OH) 2 exists mainly as Ce +3 and as a Ce +4 species when co-deposited with NiOOH. The structure of the Ce +4 phase appears similar to a Ce(OH) 4 standard. However, x-ray diffraction and laser Raman measurements indicate that the latter chemical formulation is probably incorrect and that the material is more likely to be a disordered hydrous cerium oxide. Ce chemisorbed on Ni(OH) 2 and NiOOH films is predominantly in the +3 valency state. Iron oxide films prepared by anodic deposition from borate buffer solution containing Fe +2 , has been found by XAS to consist mainly of α FeOOH. The latter has been found by others to be the constituent of the corrosion film on iron; this lends credence to the present simulation approach. Future work will involve studies on the incorporation of radioactive Sr, Ce, and Cs, as well as U, into nickel and iron oxide films. Investigations on the structure and composition of chromium oxide films, the effect of temperature on the energetics and mechanism of incorporation of heavy metal ions, as well as the subsequent

  15. Surplus Cost Potential as a Life Cycle Impact Indicator for Metal Extraction

    Directory of Open Access Journals (Sweden)

    Marisa D.M. Vieira

    2016-01-01

    Full Text Available In the evaluation of product life cycles, methods to assess the increase in scarcity of resources are still under development. Indicators that can express the importance of an increase in scarcity of metals extracted include surplus ore produced, surplus energy required, and surplus costs in the mining and the milling stage. Particularly the quantification of surplus costs per unit of metal extracted as an indicator is still in an early stage of development. Here, we developed a method that quantifies the surplus cost potential of mining and milling activities per unit of metal extracted, fully accounting for mine-specific differences in costs. The surplus cost potential indicator is calculated as the average cost increase resulting from all future metal extractions, as quantified via cumulative cost-tonnage relationships. We tested the calculation procedure with 12 metals and platinum-group metals as a separate group. We found that the surplus costs range six orders of magnitude between the metals included, i.e., between $0.01–$0.02 (iron and $13,533–$17,098 (rhodium USD (year 2013 per kilogram of metal extracted. The choice of the reserve estimate (reserves vs. ultimate recoverable resource influenced the surplus costs only to a limited extent, i.e., between a factor of 0.7 and 3.2 for the metals included. Our results provide a good basis to regularly include surplus cost estimates as resource scarcity indicator in life cycle assessment.

  16. NERSC 2001 Annual Report; ANNUAL

    International Nuclear Information System (INIS)

    Hules, John

    2001-01-01

    The National Energy Research Scientific Computing Center (NERSC) is the primary computational resource for scientific research funded by the DOE Office of Science. The Annual Report for FY2001 includes a summary of recent computational science conducted on NERSC systems (with abstracts of significant and representative projects); information about NERSC's current systems and services; descriptions of Berkeley Lab's current research and development projects in applied mathematics, computer science, and computational science; and a brief summary of NERSC's Strategic Plan for 2002-2005

  17. Structural biology of the sequestration and transport of heavy metal toxins: NMR structure determination of proteins containing the -Cys-X-Y-Cys-metal binding motifs. 1998 annual progress report

    International Nuclear Information System (INIS)

    Opella, S.J.

    1998-01-01

    'The overall goal of the research is to apply the methods of structural biology, which have been previously used primarily in biomedical applications, to bioremediation. The authors are doing this by using NMR spectroscopy to determine the structures of proteins involved in the bacterial mercury detoxification system. The research is based on the premise that the proteins encoded in the genes of the bacterial detoxification system are an untapped source of reagents and, more fundamentally, chemical strategies that can be used to remove heavy metal toxins from the environment. The initial goals are to determine the structures of the proteins of the bacterial mercury detoxification systems responsible for the sequestration and transport of the Hg(II) ions in to the cell where reduction to Hg(O) occurs. These proteins are meP, which is water soluble and can be investigated with multidimensional solution NMR methods, and merT, the transport protein in the membrane that requires solid-state NMR methods. As of June 1998, this report summarizes work after about one and half years of the three-year award. The authors have made significant accomplishments in three aspects of the NMR studies of the proteins of the bacterial mercury detoxification system.'

  18. Process for Making a Noble Metal on Tin Oxide Catalyst

    Science.gov (United States)

    Davis, Patricia; Miller, Irvin; Upchurch, Billy

    2010-01-01

    To produce a noble metal-on-metal oxide catalyst on an inert, high-surface-area support material (that functions as a catalyst at approximately room temperature using chloride-free reagents), for use in a carbon dioxide laser, requires two steps: First, a commercially available, inert, high-surface-area support material (silica spheres) is coated with a thin layer of metal oxide, a monolayer equivalent. Very beneficial results have been obtained using nitric acid as an oxidizing agent because it leaves no residue. It is also helpful if the spheres are first deaerated by boiling in water to allow the entire surface to be coated. A metal, such as tin, is then dissolved in the oxidizing agent/support material mixture to yield, in the case of tin, metastannic acid. Although tin has proven especially beneficial for use in a closed-cycle CO2 laser, in general any metal with two valence states, such as most transition metals and antimony, may be used. The metastannic acid will be adsorbed onto the high-surface-area spheres, coating them. Any excess oxidizing agent is then evaporated, and the resulting metastannic acid-coated spheres are dried and calcined, whereby the metastannic acid becomes tin(IV) oxide. The second step is accomplished by preparing an aqueous mixture of the tin(IV) oxide-coated spheres, and a soluble, chloride-free salt of at least one catalyst metal. The catalyst metal may be selected from the group consisting of platinum, palladium, ruthenium, gold, and rhodium, or other platinum group metals. Extremely beneficial results have been obtained using chloride-free salts of platinum, palladium, or a combination thereof, such as tetraammineplatinum (II) hydroxide ([Pt(NH3)4] (OH)2), or tetraammine palladium nitrate ([Pd(NH3)4](NO3)2).

  19. Annual report

    International Nuclear Information System (INIS)

    1986-01-01

    This is the thirty-ninth annual report of the Atomic Energy Control Board. The period covered by this report is the year ending March 31, 1986. The Atomic Energy Control Board (AECB) was established in 1946, by the Atomic Energy Control Act (AEC Act), (Revised Statues of Canada (R.S.C.) 1970 cA19). It is a departmental corporation (Schedule B) within the meaning and purpose of the Financial Administration Act. The AECB controls the development, application and use of atomic energy in Canada, and participates on behalf of Canada in international measures of control. The AECB is also repsonsible for the administration of the Nuclear Liability Act, (R.S.C. 1970 c29 1st Supp) as amended, including the designation of nuclear installations and the prescription of basic insurance to be carried by the operators of such nuclear installations. The AECB reports to Parliament through a designated Minister, currently the Minister of Energy, Mines and Resources

  20. Annual report 2002

    International Nuclear Information System (INIS)

    2003-01-01

    This annual report provides information on the energies and raw materials policy for 2002. The first part, devoted to the supplying safety, deals with the petroleum situation in 2002, the new perspectives for the continental shelf exploitation, the heavy metals prices evolution and the renewable energies promotion. The second part on the markets opening presents the new legislation of the energy markets, the new juridical framework of the natural gas transportation network, EdF, GdF and the National Company of the Rhone situation, the markets liberalization. The third part deals with the today subjects as the sustainable development, the nuclear situation, the high voltage power lines and the environment, the end of the mines exploitation in France, the energy policy facing the climatic change, the National Debate on the energies, the directive on the energy efficiency of buildings. (A.L.B.)

  1. Quarterly, Bi-annual and Annual Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Quarterly, Bi-annual and Annual Reports are periodic reports issued for public release. For the deep set fishery these reports are issued quarterly and anually....

  2. The use of masking agents in the determination, by hydride generation and atomic-absorption spectrophotometry, of arsenic, antimony, selenium, tellurium, and bismuth in the presence of noble metals

    International Nuclear Information System (INIS)

    Kellerman, S.P.

    1982-01-01

    The effectiveness of thiosemicarbazide, tellurium, and potassium iodide as masking agents to eliminate interferences was assessed. Thiosemicarbazide was found to be effective in eliminating or reducing the interferences on arsenic, antimony, and bismuth, and tellurium reduced the interferences on selenium. The interferences on tellurium could not be eliminated. Arsenic, antimony, selenium, and bismuth were determined in metal sulphide concentrates that were spiked with the noble metals (defined here as gold plus all the platinum-group metals except osmium). The relative standard deviations for arsenic, antimony, bismuth, and selenium were 0,061, 0,017, 0,029, and 0,145 respectively. The values obtained for all the analytes agreed favourably with the preferred values for two in-house reference samples. The laboratory method is detailed in an appendix

  3. Annual report 2009. Institute of Radiochemistry

    International Nuclear Information System (INIS)

    Bernhard, G.

    2010-01-01

    The annual report 2009 of the institute of radiochemistry covers the following topics: Part 1: Actinides (metals) in biosystems; Part 2: Actinides in waste repositories. The research projects were aimed to the basic knowledge about coordination of actinide element transport and transfer in the environment, bacteria influence on the immobilization of heavy metals in water and soils, microbial diversity in biofilms and clays, protein applications for biosensors, dominating processes of soil-liquid interfaces, sorption and surface complexation processes.

  4. Recycling Potentials of Critical Metals-Analyzing Secondary Flows from Selected Applications

    Directory of Open Access Journals (Sweden)

    Till Zimmermann

    2014-03-01

    Full Text Available Metal mobilization in general, as well as the number of metals used in products to increase performance and provide sometimes unique functionalities, has increased steadily in the past decades. Materials, such as indium, gallium, platinum group metals (PGM, and rare earths (RE, are used ever more frequently in high-tech applications and their criticality as a function of economic importance and supply risks has been highlighted in various studies. Nevertheless, recycling rates are often below one percent. Against this background, secondary flows of critical metals from three different end-of-life products up to 2020 are modeled and losses along the products’ end-of-life (EOL chain are identified. Two established applications of PGM and RE–industrial catalysts and thermal barrier coatings–and CIGS photovoltaic cells as a relatively new product have been analyzed. In addition to a quantification of future EOL flows, the analysis showed that a relatively well working recycling system exists for PGM-bearing catalysts, while a complete loss of critical metals occurs for the other applications. The reasons include a lack of economic incentives, technologically caused material dissipation and other technological challenges.

  5. The application of the inductively coupled plasma system to the simultaneous determination of precious metals

    International Nuclear Information System (INIS)

    Watson, A.E.; Russell, G.M.; Middleton, H.R.; Davenport, F.F.

    1983-01-01

    This report describes the development of a spectrochemical technique using excitation by an inducticely coupled plasma (ICP) source for the simultaneous determination of the precious metals (defined here as gold, silver, and all the platinum-group metals except osmium) in a wide variety of samples from a plant for the extraction and refining of platinum metal. The limits of detection for the analytes were determined in various acid and salt media and, under the conditions used, ranged from 20 to 100ng/l. The analytes were determined in the presence of a thousandfold excess of each of the other precious metals used as a matrix element. Some severe interferences were noted but were ascribed to spectral-line overlap or to contamination of the matrix material. Various dissolution techniques, based upon standard procedures applied in the precious-metals industry, were used, depending on the particular type of material treated. The spectrometer was calibrated by the use of solutions containing the analytes, sodium chloride, and acid, with scandium as the internal standard. The accuracy and precision of the technique, established by the analysis of many samples of each type, were found to be satisfactory when close attention was paid to detail in the preparation of the analytical solution. The relative standard deviation of the method ranges from 0,005 to 0,05, depending on the element being determined

  6. Metal footprint linked to economy

    Science.gov (United States)

    Burke, Paul J.

    2018-04-01

    The annual quantity of metal being used by humans has been on the rise. A new analysis of 43 major economies reveals the extent to which year-to-year fluctuations in metal footprints have been in lockstep with countries' economic growth and changes in investment spending.

  7. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-31

    This report is the Materials Sciences Division`s annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  8. Materials Sciences Division 1990 annual report

    Energy Technology Data Exchange (ETDEWEB)

    1990-01-01

    This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals.

  9. Materials Sciences Division 1990 annual report

    International Nuclear Information System (INIS)

    1990-01-01

    This report is the Materials Sciences Division's annual report. It contains abstracts describing materials research at the National Center for Electron Microscopy, and for research groups in metallurgy, solid-state physics, materials chemistry, electrochemical energy storage, electronic materials, surface science and catalysis, ceramic science, high tc superconductivity, polymers, composites, and high performance metals

  10. Annual report '80

    International Nuclear Information System (INIS)

    1981-01-01

    This document is an annual report from the Foundation for Fundamental Research on Matter (FOM) and the Foundation Institute for Nuclear Physics Research (IKO). The FOM stimulates research in new fields of physics, by the co-ordination of existing research projects and by calling in the help of its institutes and working groups. Furthermore it supports the IKO which has as its task the promotion of fundamental and applied scientific research in the field of nuclear physics and related fields in the Netherlands. The report contains organisational and financial reports and information concerning the personnel. The following FOM institutes/working-communities have submitted separate reports: Nuclear physics, Institute for atomic and molecular physics, Atomic physics, Metals FOM-TNO, Molecular physics, Solid State, Thermonuclear Research and Plasma Physics and High energy physics. Reports are also included from the Special Committee for Theoretical physics, The Special Committee for Technical physics and the Contact Group for technical semi-conductor physics and electronics. Four ''trend articles'' are also included with the following titles: 'Atomic hydrogen as a gas at low temperatures', 'Negative ion beams', 'Turbulence in plasmas' and 'Nuclear structure described by interacting bosons'. (C.F.)

  11. Screening and prioritisation of chemical risks from metal mining operations, identifying exposure media of concern.

    Science.gov (United States)

    Pan, Jilang; Oates, Christopher J; Ihlenfeld, Christian; Plant, Jane A; Voulvoulis, Nikolaos

    2010-04-01

    Metals have been central to the development of human civilisation from the Bronze Age to modern times, although in the past, metal mining and smelting have been the cause of serious environmental pollution with the potential to harm human health. Despite problems from artisanal mining in some developing countries, modern mining to Western standards now uses the best available mining technology combined with environmental monitoring, mitigation and remediation measures to limit emissions to the environment. This paper develops risk screening and prioritisation methods previously used for contaminated land on military and civilian sites and engineering systems for the analysis and prioritisation of chemical risks from modern metal mining operations. It uses hierarchical holographic modelling and multi-criteria decision making to analyse and prioritise the risks from potentially hazardous inorganic chemical substances released by mining operations. A case study of an active platinum group metals mine in South Africa is used to demonstrate the potential of the method. This risk-based methodology for identifying, filtering and ranking mining-related environmental and human health risks can be used to identify exposure media of greatest concern to inform risk management. It also provides a practical decision-making tool for mine acquisition and helps to communicate risk to all members of mining operation teams.

  12. A new approach to precious metals recovery from brown coals: Correlation of recovery efficacy with the mechanism of metal-humic interactions

    Science.gov (United States)

    Bratskaya, Svetlana Yu.; Volk, Alexandra S.; Ivanov, Vladimir V.; Ustinov, Alexander Yu.; Barinov, Nikolay N.; Avramenko, Valentin A.

    2009-06-01

    The presence of gold and platinum group elements (PGE) in low-rank brown coals around the world has promoted interest in the industrial exploitation of this alternative source of precious metals. However, due to low efficacy of the methods traditionally used for the processing of mineral ores, there exists a high demand for new strategies of precious metal recovery from refractory carbonaceous materials that could significantly increase the economic potential of gold- and PGE-bearing organic resources. Here we discuss the possibility of gold and PGE recovery from alkaline extracts of brown coals using the difference in colloidal stability of bulk organic matter and its fractions enriched with precious metals. This approach enables one to avoid complete oxidation or combustion of brown coals prior to gold recovery, to minimize organic content in gold concentrate, and to obtain a valuable by-product - humic extracts. Using gold-bearing brown coals from several deposits located in the South Far East of Russia, we show that up to 95% of gold can be transferred to alkaline extracts of humic acids (HA) and up to 85% of this gold can be recovered by centrifugation at pH 4.0-6.0, when only 5-15% of HA precipitated simultaneously. We have shown that the high efficacy of gold recovery can be attributed to the occurrence of fine-dispersed elemental gold particles stabilized by HA, which differ significantly in colloidal stability from the bulk organic matter and, thus, can be separated by centrifugation.

  13. Impact of terrestrial mining and intensive agriculture in pollution of estuarine surface sediments: Spatial distribution of trace metals in the Gulf of Urabá, Colombia.

    Science.gov (United States)

    Vallejo Toro, Pedro Pablo; Vásquez Bedoya, Luis Fernando; Correa, Iván Darío; Bernal Franco, Gladys Rocío; Alcántara-Carrió, Javier; Palacio Baena, Jaime Alberto

    2016-10-15

    The Gulf of Urabá (northwestern Colombia) is a geostrategic region, rich in biodiversity and natural resources. Its economy is mainly based on agribusinesses and mining activities. In this research is determined the impact of these activities in bottom surface sediments of the estuary. Thus, grain size, total organic carbon, total nitrogen, carbonates, Ag, Al, Ca, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb and Zn concentrations from 17 surface sediment samples were obtained and enrichment factors (EF) as well as geo-accumulation indices (Igeo) were calculated to determine the contamination level in the gulf. EF and Igeo values revealed that the estuary is extremely contaminated with Ag and moderately contaminated with Zn. Therefore, the observed enrichment of Ag may be explained as a residue of the extraction of gold and platinum-group metals and the enrichment with Zn associated mainly to pesticides used in banana plantations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Metal-metal-hofteproteser

    DEFF Research Database (Denmark)

    Ulrich, Michael; Overgaard, Søren; Penny, Jeannette

    2014-01-01

    In Denmark 4,456 metal-on-metal (MoM) hip prostheses have been implanted. Evidence demonstrates that some patients develope adverse biological reactions causing failures of MoM hip arthroplasty. Some reactions might be systemic. Failure rates are associated with the type and the design of the Mo...

  15. Hydroclimatic control of sediment and metal export from a rural catchment in Northwest Spain

    OpenAIRE

    L. Palleiro; M. L. Rodríguez-Blanco; M. M. Taboada-Castro; M. T. Taboada-Castro

    2014-01-01

    This paper examines sediment and metal (Al, Fe, Mn, Cu, and Zn) exportation at different time scales (annual, seasonal and event) during a three-year period (2005–2008) in the Mero River headwater, a rural catchment under humid temperate climate. Inter-annual differences were found both in annual loads and their distributions throughout the year. At annual scale, sediment and particulate metal loads followed the same trend as streamflow, while dissolved metals showed differe...

  16. Metallated metal-organic frameworks

    Energy Technology Data Exchange (ETDEWEB)

    Bury, Wojciech; Farha, Omar K.; Hupp, Joseph T.; Mondloch, Joseph E.

    2017-08-22

    Porous metal-organic frameworks (MOFs) and metallated porous MOFs are provided. Also provided are methods of metallating porous MOFs using atomic layer deposition and methods of using the metallated MOFs as catalysts and in remediation applications.

  17. Annual report 1973

    International Nuclear Information System (INIS)

    1973-01-01

    The GKSS scientific annual report summarizes the problems and results of the research and development projects of 1973. In contrast to earlier annual reports, a comprehensive description of the research facilities is not included. The annual report was extended by the paragraph 'Financial Report 1973' in the chapter 'Development of Geesthacht Research Centre'. The financial report gives a survey of the financial transactions and the major operations of the year under review. (orig./AK) [de

  18. NUKEM annual report 1981

    International Nuclear Information System (INIS)

    The annual report of this important undertaking in the German nuclear industry informs about its structure, holdings and activities in 1981. The report of the management is followed by remarks on the annual statement of accounts (annual balance, profit-loss accounting) and the report of the Supervisory Board. In the annex the annual balance of NUKEM GmbH/HOBEG mbH as per December 31, 1981, and the profit-loss accounting of NUKEM GmbH/HOBEG mbH for the business year 1981 are presented. (UA) [de

  19. Annual Statistical Supplement, 2002

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2002 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  20. Annual Statistical Supplement, 2010

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2010 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  1. Annual Statistical Supplement, 2007

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2007 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  2. Annual Statistical Supplement, 2001

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2001 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  3. Annual Statistical Supplement, 2016

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2016 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  4. Annual Statistical Supplement, 2011

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2011 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  5. Annual Statistical Supplement, 2005

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2005 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  6. Annual Statistical Supplement, 2015

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2015 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  7. Annual Statistical Supplement, 2003

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2003 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  8. Annual Statistical Supplement, 2017

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2017 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  9. Annual Statistical Supplement, 2008

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2008 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  10. Annual Statistical Supplement, 2014

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2014 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  11. Annual Statistical Supplement, 2004

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2004 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  12. Annual Statistical Supplement, 2000

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2000 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  13. Annual Statistical Supplement, 2009

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2009 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  14. Annual Statistical Supplement, 2006

    Data.gov (United States)

    Social Security Administration — The Annual Statistical Supplement, 2006 includes the most comprehensive data available on the Social Security and Supplemental Security Income programs. More than...

  15. Challenges of metal recycling and an international covenant as possible instrument of a globally extended producer responsibility.

    Science.gov (United States)

    Wilts, Hennning; Bringezu, Stefan; Bleischwitz, Raimund; Lucas, Rainer; Wittmer, Dominic

    2011-09-01

    As illustrated by the case studies of end-of-life vehicles and waste electric and electronic equipment, the approach of an extended producer responsibility is undermined by the exports of used and waste products. This fact causes severe deficits regarding circular flows, especially of critical raw materials such as platinum group metals. With regard to global recycling there seems to be a responsibility gap which leads somehow to open ends of waste flows and a loss or down-cycling of potential secondary resources. Existing product-orientated extended producer responsibility (EPR) approaches with mass-based recycling quotas do not create adequate incentives to supply waste materials containing precious metals to a high-quality recycling and should be amended by aspects of a material stewardship. The paper analyses incentive effects on EPR for the mentioned product groups and metals, resulting from existing regulations in Germany. It develops a proposal for an international covenant on metal recycling as a policy instrument for a governance-oriented framework to initiate systemic innovations along the complete value chain taking into account product group- and resource group-specific aspects on different spatial levels. It aims at the effective implementation of a central idea of EPR, the transition of a waste regime still focusing on safe disposal towards a sustainable management of resources for the complete lifecycle of products.

  16. Bundesanstalt fuer Fleischforschung: Annual report 1980

    Energy Technology Data Exchange (ETDEWEB)

    1983-02-01

    The objective of the Federal Institute for Meat Research is to contribute, through research and development, to the adequate provision of the Federal German population with high quality, where some meat and meat products including slaughter fat, eggs and poultry products, which are free of toxic residues. This includes the development of analytical procedures for the determination of toxic heavy metals in foods, and is the subject of four contributions to this Annual Report.

  17. CSIR Annual report 1965

    CSIR Research Space (South Africa)

    CSIR

    1965-01-01

    Full Text Available stream_source_info Annual Report_ 1965.pdf.txt stream_content_type text/plain stream_size 48 Content-Encoding ISO-8859-1 stream_name Annual Report_ 1965.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  18. CSIR Annual report 1992

    CSIR Research Space (South Africa)

    CSIR

    1992-01-01

    Full Text Available stream_source_info Annual Report_ 1992.pdf.txt stream_content_type text/plain stream_size 39 Content-Encoding ISO-8859-1 stream_name Annual Report_ 1992.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  19. CSIR Annual report 1979

    CSIR Research Space (South Africa)

    CSIR

    1979-01-01

    Full Text Available stream_source_info CSIR Annual report_1979.pdf.txt stream_content_type text/plain stream_size 86 Content-Encoding ISO-8859-1 stream_name CSIR Annual report_1979.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  20. CSIR Annual report 1976

    CSIR Research Space (South Africa)

    CSIR

    1976-01-01

    Full Text Available stream_source_info Annual Report_1976.pdf.txt stream_content_type text/plain stream_size 75 Content-Encoding ISO-8859-1 stream_name Annual Report_1976.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  1. CSIR Annual report 1978

    CSIR Research Space (South Africa)

    CSIR

    1978-01-01

    Full Text Available stream_source_info Annual Report_1978.pdf.txt stream_content_type text/plain stream_size 78 Content-Encoding ISO-8859-1 stream_name Annual Report_1978.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  2. CSIR Annual report 1991

    CSIR Research Space (South Africa)

    CSIR

    1991-01-01

    Full Text Available stream_source_info Annual Report_ 1991.pdf.txt stream_content_type text/plain stream_size 40 Content-Encoding ISO-8859-1 stream_name Annual Report_ 1991.pdf.txt Content-Type text/plain; charset=ISO-8859-1 ...

  3. Annual Partnership Report, 2016

    Science.gov (United States)

    Wyoming Community College Commission, 2016

    2016-01-01

    The "Annual Partnership Report" catalogs partnerships that Wyoming community colleges established and maintained for each fiscal year. This partnership report fulfills statutory reporting requirement W.S. 21-18-202(e)(iv) which mandates the development of annual reports to the legislature on the outcomes of partnerships between colleges…

  4. Annual Report 1997

    Energy Technology Data Exchange (ETDEWEB)

    Golnik, N.; Mika, J.R.; Wieteska, K. [eds.

    1998-12-31

    This Annual Report of the Institute of Atomic Energy describes the results of the research works carried out at the Institute at 1997. As in the preceding years the authors of the individual scientific reports published in this Annual Report are fully responsible for their content and layout. The Report contains the information on other activities of the Institute as well. (author)

  5. Annual Energy Review, 2008

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-06-01

    The Annual Energy Review (AER) is the Energy Information Administration's (EIA) primary report of annual historical energy statistics. For many series, data begin with the year 1949. Included are statistics on total energy production, consumption, trade, and energy prices; overviews of petroleum, natural gas, coal, electricity, nuclear energy, renewable energy, and international energy; financial and environment indicators; and data unit conversions.

  6. Natural gas annual 1991

    International Nuclear Information System (INIS)

    1993-01-01

    The Natural Gas Annual 1991 provides information on the supply and disposition of natural gas to a wide audience including industry, consumers Federal and State agencies, and education institutions. This report, the Natural Gas Annual 1991 Supplement: Company Profiles, presents a detailed profile of selected companies

  7. Annual Report 2001

    International Nuclear Information System (INIS)

    Swiboda, G.

    2002-01-01

    This Annual Report of the Institute of Atomic Energy describes the results of the research works carried out at the Institute at 2001. As in the preceding years the authors of the individual scientific reports published in this Annual Report are fully responsible for their content and layout. The Report contains the information on other activities of the Institute as well. (author)

  8. Annual report to Congress

    International Nuclear Information System (INIS)

    1987-01-01

    This is the ninth Annual Report to Congress of the United States Department of Energy. It covers the activities of all elements of the Department except the independent Federal Regulatory Commission, which issues its own annual report. 88 refs., 43 tabs

  9. Annual Report 1997

    International Nuclear Information System (INIS)

    Golnik, N.; Mika, J.R.; Wieteska, K.

    1998-01-01

    This Annual Report of the Institute of Atomic Energy describes the results of the research works carried out at the Institute at 1997. As in the preceding years the authors of the individual scientific reports published in this Annual Report are fully responsible for their content and layout. The Report contains the information on other activities of the Institute as well. (author)

  10. Annual Report 1997

    Energy Technology Data Exchange (ETDEWEB)

    Golnik, N; Mika, J R; Wieteska, K [eds.

    1999-12-31

    This Annual Report of the Institute of Atomic Energy describes the results of the research works carried out at the Institute at 1997. As in the preceding years the authors of the individual scientific reports published in this Annual Report are fully responsible for their content and layout. The Report contains the information on other activities of the Institute as well. (author)

  11. Annual report 1970 - 1971 - 1972

    International Nuclear Information System (INIS)

    Freund, J.; Hildebrandt, G.; Huber, A.; Klockgether, J.; Piplies, L.; Ross, W.; Radebold, R.

    1972-12-01

    The 1st part reports on the international MHD research, the project of a liquid metal MHD system in the FRG, the task to be solved in the special research section, and the purpose of the present annual report. The 2nd part discusses the status of and advances in MHD research on an international scale as well as at the Technische Universitaet Berlin and presents a list of the papers published in the period under report, the contributions to public colloquia and other, more general activities. The 3rd part describes the structure, function, and organisation of the special research section, presents data on its personnel and financial capacity, and reports on what was learnt in organisational practice. (GG/AK) [de

  12. Heavy metals

    OpenAIRE

    Adriano, Domy; VANGRONSVELD, Jaco; Bolan, N.S.; Wenzel, W.W.

    2005-01-01

    - Sources of Metals in the Environment - Environmental Contamination - Retention and Dynamics of Metals in Soils - Adsorption - Complexation - Precipitation - Bioavailability–Natural Attenuation Interactions - Biological Response to Metals - Soil Remediation

  13. Highly Active Non-PGM Catalysts Prepared from Metal Organic Frameworks

    Directory of Open Access Journals (Sweden)

    Heather M. Barkholtz

    2015-06-01

    Full Text Available Finding inexpensive alternatives to platinum group metals (PGMs is essential for reducing the cost of proton exchange membrane fuel cells (PEMFCs. Numerous materials have been investigated as potential replacements of Pt, of which the transition metal and nitrogen-doped carbon composites (TM/Nx/C prepared from iron doped zeolitic imidazolate frameworks (ZIFs are among the most active ones in catalyzing the oxygen reduction reaction based on recent studies. In this report, we demonstrate that the catalytic activity of ZIF-based TM/Nx/C composites can be substantially improved through optimization of synthesis and post-treatment processing conditions. Ultimately, oxygen reduction reaction (ORR electrocatalytic activity must be demonstrated in membrane-electrode assemblies (MEAs of fuel cells. The process of preparing MEAs using ZIF-based non-PGM electrocatalysts involves many additional factors which may influence the overall catalytic activity at the fuel cell level. Evaluation of parameters such as catalyst loading and perfluorosulfonic acid ionomer to catalyst ratio were optimized. Our overall efforts to optimize both the catalyst and MEA construction process have yielded impressive ORR activity when tested in a fuel cell system.

  14. Annual reports in inorganic and general syntheses 1974

    CERN Document Server

    Niedenzu, Kurt

    1975-01-01

    Annual Reports in Inorganic and General Syntheses-1974 presents an organized annual summary of synthetic developments in inorganic chemistry and its related areas. The book discusses the chemistry of simple and complex metal hydrides of main groups I, II, and III, boron, aluminium, gallium, indium, thallium, silicon, germanium, tin, lead, phosphorus, arsenic, antimony, bismuth, chalcogens, halogens, and pseudohalogens. The text also describes the chemistry of scandium, yttrium, lanthanides, actinides, titanium, zirconium, hafnium, vanadium, niobium, tantalum, chromium, molybdenum, tungsten, ma

  15. 1998 Annual Study Report. Standards development of chemical analysis and non destructive inspection methods for pure titanium metals; 1998 nendo seika hokokusho. Jun chitan no shiken hyoka hoho no hyojunka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This study was conducted to standardize the chemical analysis and non-destructive inspection methods for pure titanium metals of industrial grade. These methods are among those serving bases for international standardization of products. The chemical analysis is aimed at quantitative analysis of trace impurities, in particular, present in pure titanium metals of industrial grade by developing and standardizing the inductively coupled plasma atomic emission spectroscopy, known for its low detectable limit, and, at the same time, spark and glow discharged atomic emission spectrometry as the improved routine analysis methods. These methods, although being used by, e.g., steel makers, have not been standardized because the effects of titanium-peculiar matrix are not elucidated. The non-destructive testing is aimed at standardization of the techniques useful for automatic production lines. More concretely, these include optical methods aided by a laser or CCD camera for plate surface defect inspection, ultrasonic methods for plate internal defect inspection, and pressure differential methods for air-tightness of welded pipes. They have not been used yet for automatic production lines. (NEDO)

  16. NIRE annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    The National Institute for Resources and Environment (NIRE) has a R & D concept of 'ecotechnology' that aims to protect the environment from degradation whilst promoting sustainable development. This annual report presents summaries of 32 recent research efforts.

  17. ASIST 2002 annual meeting

    CERN Multimedia

    Peek, R

    2003-01-01

    Review of discussions and presentations at the American Society for Information Science and Technology 2002 annual meeting. Topics covered included new models of scholarly publishing and the development of the semantic web (1 page).

  18. SIS - Annual Catch Limit

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Annual Catch Limit (ACL) dataset within the Species Information System (SIS) contains information and data related to management reference points and catch data.

  19. IKO Annual Report 1976

    International Nuclear Information System (INIS)

    1977-01-01

    The IKO Annual Report of 1976 relates their progress in different projects and project fields. The fields covered include electron scattering, pion and muon physics, theory, radio- and nuclear chemistry, technical department, MEA, nuclear reactions and nuclear spectroscopy

  20. Annual Adjustment Factors

    Data.gov (United States)

    Department of Housing and Urban Development — The Department of Housing and Urban Development establishes the rent adjustment factors - called Annual Adjustment Factors (AAFs) - on the basis of Consumer Price...

  1. 2002 Annual report: synthesis

    International Nuclear Information System (INIS)

    2003-01-01

    This synthesis of the Annual Report 2002 presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2002

  2. Annual report 1980

    International Nuclear Information System (INIS)

    1981-01-01

    This annual report contains a description of the named institute, the research programm, reports from the scientific establishments, a description of different cooperations, and a list of scientific publications. (HSI) [de

  3. Annual Report 1974

    International Nuclear Information System (INIS)

    1975-01-01

    This annual report supersedes the work done in the nuclear physics institute at Lyon. The studied matters are the following: nuclear theory, nuclear reactions, nuclear spectroscopy and nuclear chemistry [fr

  4. 2010 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-01-01

    This annual report includes: an overview of Western; approaches for future hydropower and transmission service; major achievements in FY 2010; FY 2010 customer Integrated Resource Planning, or IRP, survey; and financial data.

  5. Annual report 1990

    International Nuclear Information System (INIS)

    Gaeggeler, H.W.; Lorenzen, R.

    1991-04-01

    This annual report of the chemistry laboratory gives an overview of research performed during 1990 in the field of geochemistry, trace analysis, aerosol chemistry, heavy elements, cement chemistry and analytical chemistry. figs., tabs., refs

  6. Scientific annual report 1980

    International Nuclear Information System (INIS)

    1981-01-01

    This annual report contains a collection of the abstracts of the publications concerning research and development in the named institute together with a bibliography about further publications, contributions to conferences and speeches. (HSI) [de

  7. Annual report - LNLS - 1990

    International Nuclear Information System (INIS)

    1990-01-01

    This is the 1990 Annual Report of the LNLS, the upcoming Brazilian Synchrotron Light Source. It discusses its projects, organization as well as the proposed experimental stations. It presents also a list of publications. (A.C.A.S.)

  8. Annual report 2005

    International Nuclear Information System (INIS)

    Toncik, M.

    2006-04-01

    In this Annual report the operating of the Slovak Environmental Agency in 2005 is reported. The structure of the Agency, mission, personnel structure, financing, monitoring of the environment, international cooperation and coordination of research programmes are reviewed

  9. Annual report 2002

    International Nuclear Information System (INIS)

    Toncik, M.

    2003-04-01

    In this Annual report the operating of the Slovak Environmental Agency in 2002 is reported. Structure of the Agency, mission, personnel structure, financing, monitoring of the environment, international cooperation and coordination of research programmes are reviewed

  10. Annual report 2004

    International Nuclear Information System (INIS)

    Toncik, M.

    2005-04-01

    In this Annual report the operating of the Slovak Environmental Agency in 2004 is reported. The structure of the Agency, mission, personnel structure, financing, monitoring of the environment, international cooperation and coordination of research programmes are reviewed

  11. Annual report 2003

    International Nuclear Information System (INIS)

    Toncik, M.

    2004-04-01

    In this Annual report the operating of the Slovak Environmental Agency in 2003 is reported. The structure of the Agency, mission, personnel structure, financing, monitoring of the environment, international cooperation and coordination of research programmes are reviewed

  12. Annual report 2006

    International Nuclear Information System (INIS)

    Anon

    2007-04-01

    In this Annual report the operating of the Slovak Environmental Agency in 2006 is reported. The structure of the Agency, mission, personnel structure, financing, monitoring of the environment, international cooperation and coordination of research programmes are reviewed

  13. Annual Report 1978

    International Nuclear Information System (INIS)

    1979-01-01

    The annual report gives the specific scientific results in the fields of nuclear and radiation physics, radiation chemistry, radiochemistry and data processing with a list of publications. (orig.) [de

  14. 2000 Annual report: synthesis

    International Nuclear Information System (INIS)

    2001-01-01

    This synthesis of the Annual Report 2000 present information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000

  15. 2001 Annual report: synthesis

    International Nuclear Information System (INIS)

    2001-01-01

    This synthesis of the Annual Report 2001 presents information of the main activities on the scope of the radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2001

  16. Annual report 2003

    International Nuclear Information System (INIS)

    2003-01-01

    Delivering products and services to nuclear power plants operators, AREVA operates in every sector of the civilian nuclear power and fuel cycle industry. This annual report 2003 provides, in seven chapters, information on persons responsible for the annual report and for auditing the financial statements, general information on the company and share capital (statute, capital, share trading, dividends), information on company operations, changes and future prospects, assets, financial position and financial performance, corporate governance, recent developments and future prospects. (A.L.B.)

  17. Annual report June 1988

    International Nuclear Information System (INIS)

    1988-01-01

    This annual report reviews the activities of the National Accelerator Centre until June 1988. The 200 MeV cyclotron facility, the Pretoria cyclotron facility and the Van De Graaff facility are discussed in detail. Aspects of the 200 MeV cyclotron facility examined are, inter alia: the injector cyclotrons, the separated-sector cyclotron, the control system, the beam transport system and radioisotope production. Separate abstracts were prepared for the various subdivisions contained in this annual report

  18. Natural gas annual 1995

    International Nuclear Information System (INIS)

    1996-11-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level

  19. Natural gas annual 1993

    International Nuclear Information System (INIS)

    1994-01-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1993 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. Tables summarizing natural gas supply and disposition from 1989 to 1993 are given for each Census Division and each State. Annual historical data are shown at the national level

  20. Natural gas annual 1991

    International Nuclear Information System (INIS)

    1992-01-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1991 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. Tables summarizing natural gas supply and disposition form 1987 to 1991 are given for each Census Division and each State. Annual historical data are shown at the national level

  1. Heavy metal movement in metal-contaminated soil profiles

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhenbin; Shuman, L.M. [Univ. of Georgia, Griffin, GA (United States)

    1996-10-01

    Heavy metal movement in soil profiles is a major environmental concern because even slow transport through the soil may eventually lead to deterioration of groundwater quality. In this study, three metal-contaminated soil (Fuquay, Dothan, and Clarendon) were selected from cropland were a high-metal flue dust had been applied annually for 6 years to raise soil pH, with application ending 4 years before sampling. One uncontaminated soil (Tifton) from the same physiographic area was also sampled as a control. Soil samples were collected in 15-cm increments from the surface to 105 cm in depth. Total contents of Zn, Cd, and Pb in the soils samples were determined. To better understand metal movement in relation to metal fractions in the soil profile, soil samples were also extracted sequentially for exchangeable (EXC), organic matter (OM), Mn oxide (MNO), amorphous Fe oxide (AFEO), crystalline Fe oxide (CFEO), and residual (RES) fractions. 35 refs., 6 figs., 2 tabs.

  2. High-Performance Corrosion-Resistant Materials: Iron-Based Amorphous-Metal Thermal-Spray Coatings: SAM HPCRM Program ? FY04 Annual Report ? Rev. 0 - DARPA DSO and DOE OCRWM Co-Sponsored Advanced Materials Program

    International Nuclear Information System (INIS)

    Farmer, J; Haslam, J; Wong, F; Ji, S; Day, S; Branagan, D; Marshall, M; Meacham, B; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Weaver, D; Aprigliano, L; Kohler, L; Bayles, R; Lemieux, E; Wolejsza, T; Martin, F; Yang, N; Lucadamo, G; Perepezko, J; Hildal, K; Kaufman, L; Heuer, A; Ernst, F; Michal, G; Kahn, H; Lavernia, E

    2007-01-01

    The multi-institutional High Performance Corrosion Resistant Materials (HPCRM) Team is cosponsored by the Defense Advanced Projects Agency (DARPA) Defense Science Office (DSO) and the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM), and has developed new corrosion-resistant, iron-based amorphous metals that can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Corrosion costs the Department of Defense billions of dollars every year, with an immense quantity of material in various structures undergoing corrosion. For example, in addition to fluid and seawater piping, ballast tanks, and propulsions systems, approximately 345 million square feet of structure aboard naval ships and crafts require costly corrosion control measures. The use of advanced corrosion-resistant materials to prevent the continuous degradation of this massive surface area would be extremely beneficial. The Fe-based corrosion-resistant, amorphous-metal coatings under development may prove of importance for applications on ships. Such coatings could be used as an 'integral drip shield' on spent fuel containers, as well as protective coatings that could be applied over welds, thereby preventing exposure to environments that might cause stress corrosion cracking. In the future, such new high-performance iron-based materials could be substituted for more-expensive nickel-based alloys, thereby enabling a reduction in the $58-billion life cycle cost for the long-term storage of the Nation's spent nuclear fuel by tens of percent

  3. High-Performance Corrosion-Resistant Materials: Iron-Based Amorphous-Metal Thermal-Spray Coatings: SAM HPCRM Program ? FY04 Annual Report ? Rev. 0 - DARPA DSO & DOE OCRWM Co-Sponsored Advanced Materials Program

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J; Haslam, J; Wong, F; Ji, S; Day, S; Branagan, D; Marshall, M; Meacham, B; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Weaver, D; Aprigliano, L; Kohler, L; Bayles, R; Lemieux, E; Wolejsza, T; Martin, F; Yang, N; Lucadamo, G; Perepezko, J; Hildal, K; Kaufman, L; Heuer, A; Ernst, F; Michal, G; Kahn, H; Lavernia, E

    2007-09-19

    The multi-institutional High Performance Corrosion Resistant Materials (HPCRM) Team is cosponsored by the Defense Advanced Projects Agency (DARPA) Defense Science Office (DSO) and the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM), and has developed new corrosion-resistant, iron-based amorphous metals that can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Corrosion costs the Department of Defense billions of dollars every year, with an immense quantity of material in various structures undergoing corrosion. For example, in addition to fluid and seawater piping, ballast tanks, and propulsions systems, approximately 345 million square feet of structure aboard naval ships and crafts require costly corrosion control measures. The use of advanced corrosion-resistant materials to prevent the continuous degradation of this massive surface area would be extremely beneficial. The Fe-based corrosion-resistant, amorphous-metal coatings under development may prove of importance for applications on ships. Such coatings could be used as an 'integral drip shield' on spent fuel containers, as well as protective coatings that could be applied over welds, thereby preventing exposure to environments that might cause stress corrosion cracking. In the future, such new high-performance iron-based materials could be substituted for more-expensive nickel-based alloys, thereby enabling a reduction in the $58-billion life cycle cost for the long-term storage of the Nation's spent nuclear fuel by tens of percent.

  4. Hydroclimatic control of sediment and metal export from a rural catchment in northwestern Spain

    OpenAIRE

    Palleiro, L.; Rodríguez-Blanco, M. L.; Taboada-Castro, M. M.; Taboada-Castro, M. T.

    2014-01-01

    This paper examines sediment and metal (Al, Fe, Mn, Cu, and Zn) exportation at different timescales (annual, seasonal and event) during a 3-year period (2005–2008) in the Mero River headwater, a rural catchment under humid temperate climate. Interannual differences were found both in annual loads and their distributions throughout the year. At annual scale, sediment and particulate metal loads followed the same trend as streamflow, while dissolved metals showed different pat...

  5. Annual report 1980

    International Nuclear Information System (INIS)

    1981-06-01

    The report reviews the activities of the BAM departments for - metals and metal constructions - building construction - organic materials - chemical safety engineering - special fields of materials testing - processes independent of materials and of its technical and scientific services. The second part contains general information and statistics for 1980. (RW) [de

  6. New metals

    International Nuclear Information System (INIS)

    Bergqvist, U.

    1983-12-01

    The aim of this report is to estimate the exposure to various metals and metal compounds and discuss the available information of the possible toxic effects of these metals and compounds. In the first section, some metals are defined as those with either a large or a fast increasing exposure to living organisms. The available information on toxicity is discussed in the second section. In the third section interesting metals are defined as compounds having a large exposure and an apparent insufficient knowledge of their possible toxic effects. Comments on each of these metals are also to be found in the third section. (G.B.)

  7. Annual report 1976

    International Nuclear Information System (INIS)

    1977-01-01

    This annual report is the fifth issued in English from the Tandem Accelerator Laboratory in Uppsala since research was started in November 1970. It covers work performed during the calendar year 1976 and updates information given in earlier annual reports with regard to laboratory facilities such as computer configuration and layout of the experimental area. The descriptions of the research projects are also in general more detailed than usual and may sometime contain results obtained before 1976 in order to avoid too many references to earlier annual reports. It has, for instance, been thought of interest to make the sections on the study of beam foil excitation of atoms and on the measurements of nuclear deformations by the REPREC method quite extensive. (Auth.)

  8. Petroleum supply annual 1992

    International Nuclear Information System (INIS)

    1993-01-01

    The Petroleum Supply Annual (PSA) contains information on the supply and disposition of crude oil and petroleum products. The publication reflects data that were collected from the petroleum industry during 1992 through annual and monthly surveys. The PSA is divided into two volumes. The first volume contains four sections: Summary Statistics, Detailed Statistics, Refinery Capacity, and Oxygenate Capacity each with final annual data. This second volume contains final statistics for each month of 1992, and replaces data previously published in the Petroleum Supply Monthly (PSM). The tables in Volumes 1 and 2 are similarly numbered to facilitate comparison between them. Explanatory Notes, located at the end of this publication, present information describing data collection, sources, estimation methodology, data quality control procedures, modifications to reporting requirements and interpretation of tables. Industry terminology and product definitions are listed alphabetically in the Glossary

  9. Rare earth elements and critical metal content of extracted landfilled material and potential recovery opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Gutiérrez-Gutiérrez, Silvia C.; Coulon, Frédéric; Jiang, Ying; Wagland, Stuart, E-mail: s.t.wagland@cranfield.ac.uk

    2015-08-15

    Highlights: • Samples from multiple core drills were obtained from 4× landfill sites in the UK. • Each sample analysed for rare earth elements, critical metals and valuable metals. • Two stage microwave digestion method ensuring high yield. • High quantities of copper and aluminium were observed in the soil layers of landfill. • Across 4× landfills aluminium and copper present has a value of around $400 million. - Abstract: Rare earth elements (REEs), Platinum group metals (PGMs) and other critical metals currently attract significant interest due to the high risks of supply shortage and substantial impact on the economy. Their uses in many applications have made them present in municipal solid waste (MSW) and in commercial and industrial waste (C&I), since several industrial processes produce by-products with high content of these metals. With over 4000 landfills in the UK alone, the aim of this study was to assess the existence of these critical metals within landfills. Samples collected from four closed landfills in UK were subjected to a two-step acid digestion to extract 27 metals of interest. Concentrations across the four landfill sites were 58 ± 6 mg kg{sup −1} for REEs comprising 44 ± 8 mg kg{sup −1} for light REEs, 11 ± 2 mg kg{sup −1} for heavy REEs and 3 ± 1 mg kg{sup −1} for Scandium (Sc) and 3 ± 1.0 mg kg{sup −1} of PGMs. Compared to the typical concentration in ores, these concentrations are too low to achieve a commercially viable extraction. However, content of other highly valuable metals (Al and Cu) was found in concentrations equating to a combined value across the four landfills of around $400 million, which increases the economic viability of landfill mining. Presence of critical metals will mainly depend on the type of waste that was buried but the recovery of these metals through landfill mining is possible and is economically feasible only if additional materials (plastics, paper, metallic items and other) are

  10. Natural gas annual 1997

    International Nuclear Information System (INIS)

    1998-10-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1997 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1993 to 1997 for each Census Division and each State. Annual historical data are shown at the national level. 27 figs., 109 tabs

  11. Natural gas annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1997 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1993 to 1997 for each Census Division and each State. Annual historical data are shown at the national level. 27 figs., 109 tabs.

  12. International energy annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power, geothermal, solar, and wind electric power, biofuels energy for the US, and biofuels electric power for Brazil. New in the 1996 edition are estimates of carbon dioxide emissions from the consumption of petroleum and coal, and the consumption and flaring of natural gas. 72 tabs.

  13. Analysis of precious metals at parts-per-billion levels in industrial applications

    International Nuclear Information System (INIS)

    Tickner, James; O'Dwyer, Joel; Roach, Greg; Smith, Michael; Van Haarlem, Yves

    2015-01-01

    Precious metals, including gold and the platinum group metals (notable Pt, Pd and Rh), are mined commercially at concentrations of a few parts-per-million and below. Mining and processing operations demand sensitive and rapid analysis at concentrations down to about 100 parts-per-billion (ppb). In this paper, we discuss two technologies being developed to meet this challenge: X-ray fluorescence (XRF) and gamma-activation analysis (GAA). We have designed on-stream XRF analysers capable of measuring targeted elements in slurries with precisions in the 35–70 ppb range. For the past two years, two on-stream analysers have been in continuous operation at a precious metals concentrator plant. The simultaneous measurement of feed and waste stream grades provides real-time information on metal recovery, allowing changes in operating conditions and plant upsets to be detected and corrected more rapidly. Separately, we have been developing GAA for the measurement of gold as a replacement for the traditional laboratory fire-assay process. High-energy Bremsstrahlung X-rays are used to excite gold via the 197 Au(γ,γ′) 197 Au-M reaction, and the gamma-rays released in the decay of the meta-state are then counted. We report on work to significantly improve accuracy and detection limits. - Highlights: • X-ray fluorescence analysis at sub-parts-per-million concentration in bulk materials. • Gamma activation analysis of gold at high accuracy and low concentrations. • Use of advanced Monte Carlo techniques to optimise radiation-based analysers. • Industrial application of XRF and GAA technologies for minerals processing.

  14. Toxicity of platinum, palladium and rhodium to Daphnia magna in single and binary metal exposure experiments.

    Science.gov (United States)

    Zimmermann, Sonja; Wolff, Carolina; Sures, Bernd

    2017-05-01

    Mainly due to automobile traffic, but also due to other sources, the platinum group elements (PGE) platinum (Pt), palladium (Pd) and rhodium (Rh) are introduced into aquatic biotopes where they accumulate in sediments of lakes and rivers. However, the toxicity of these noble metals to aquatic organisms is not well understood and especially toxicity studies under standardized condition are lacking. Thus, the toxicity of Pt, Pd and Rh to Daphnia magna was tested in single metal exposure experiments according to OECD guideline 202. Immobility and lethality was recorded after 24 h and 48 h of exposure and EC 50 and LC 50 , respectively, were determined. As the nominal exposure concentration of Pd differed significantly from the quantified concentration, the control of the real exposure concentration by chemical analysis is mandatory, especially for Pd. The toxicity decreased in the order Pd > Pt ≫ Rh with e.g. LC 50 (48 h) values of 14 μg/L for Pd, 157 μg/L for Pt and 56,800 μg/L for Rh. The exposure period had a clear effect on the toxicity of Pt, Pd and Rh. For Pt and Rh the endpoint immobility was more sensitive than the endpoint lethality whereas Pd toxicity was similar for both endpoints. The Hill slopes, which are a measure for the steepness of the concentration-response curves, showed no significant discrepancies between the different metals. The binary metal exposure to Pt and Pd revealed a more-than-additive, i.e. a synergistic toxicity using the toxic unit approach. The present study is a start to understand the toxicity of interacting PGE. The modes of action behind the synergistic effect are unclear. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Silicone metalization

    Energy Technology Data Exchange (ETDEWEB)

    Maghribi, Mariam N. (Livermore, CA); Krulevitch, Peter (Pleasanton, CA); Hamilton, Julie (Tracy, CA)

    2008-12-09

    A system for providing metal features on silicone comprising providing a silicone layer on a matrix and providing a metal layer on the silicone layer. An electronic apparatus can be produced by the system. The electronic apparatus comprises a silicone body and metal features on the silicone body that provide an electronic device.

  16. Annual report 1985

    International Nuclear Information System (INIS)

    1985-01-01

    Aspects regarding ceramics, electronic materials, metals, the specialist task group, services to industry and other organizations and research support activities are discussed in the report. The highlights of the period are given, namely: the effect of high pressure on twophase systems, spinel structures, elastic moduli of stabilized zirconia crystals, alumina ceramics, a fast sodium-ion conducting solid electrolyte (Nasicon), liquid phase epitaxial growth of (HgCd)Te, compositional uniformity of bulk-grown (HgCd)Te, semi-quantitative mass spectrography of Cd and Te, depth profiling of metal semiconductor interdiffusion, low resistance ohmic contacts on GaAs, studies of Fe-Mn-Al alloys, surface mechanical properties of materials, electron diffraction, ceramic mould laboratory for investment casting of metals, grain boundary, sliding in the deformation of polycrystalline copper and a theory of work-hardening in face-centered cubic metals

  17. Annual report 2000

    International Nuclear Information System (INIS)

    2001-07-01

    Article VI.J of the Agency's Statute requires the Board of Governors to submit 'an annual report to the General Conference concerning the affairs of the Agency and any projects approved by the Agency'. This report covers the period 1 January to 31 December 2000

  18. IRI annual report 1989

    International Nuclear Information System (INIS)

    1990-01-01

    In this annual report of the Dutch Interfacultary Reactor Institute, summary reports are presented of current research and teaching activities during 1989 of the departments radiochemistry, radiation chemistry, radiation physics and reactor physics, operation and maintenance of, and experiments with the Delft Hoger Onderwijs reactor, nuclear instrumentation projects and supporting services. (H.W.). 299 refs.; 2 figs.; 7 tabs

  19. Annual report 1981

    International Nuclear Information System (INIS)

    1981-12-01

    This annual report contains short descriptions of the work done at the named institute. These concern the study of hyperfine interactions, experiments with synchroton radiation, experiments at storage rings, and experiments at CERN. Furthermore, a list of publications, contributions to conferences and these is presented. (HSI) [de

  20. CSIR Annual report 1966

    CSIR Research Space (South Africa)

    CSIR

    1966-01-01

    Full Text Available This report presents the twenty second annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1966, to the 31st December 1966. Balance sheets and statements of income and expenditure...

  1. Annual Report - ESCELSA - 1997

    International Nuclear Information System (INIS)

    1998-01-01

    The annual report of ESCELSA - Brazilian electric power distribution company - introduces the following main topics: state of Espirito Santo; strategic focus; financial performance; relation with investors; energy sales; market overview; market expansion; customers; technological stream; measuring quality; electric system; investments; protecting the environment; and resource allocation

  2. Annual Conference Abstracts

    Science.gov (United States)

    Journal of Engineering Education, 1972

    1972-01-01

    Includes abstracts of papers presented at the 80th Annual Conference of the American Society for Engineering Education. The broad areas include aerospace, affiliate and associate member council, agricultural engineering, biomedical engineering, continuing engineering studies, chemical engineering, civil engineering, computers, cooperative…

  3. HASYLAB annual report 1987

    International Nuclear Information System (INIS)

    1988-01-01

    This annual report contains extended abstracts about the work performed at HASYLAB together with a list of publications, speeches, and theses. The work concerns technical developments, the study of the electronic structure of atoms, molecules, solids, surfaces, and liquids, X-ray structure studies of solids and interfaces, molecular biology, further applications of synchrotron radiation, and experimental developments. (HSI)

  4. Annual report 1996

    International Nuclear Information System (INIS)

    1996-01-01

    This annual report presents an evaluation of activities of the Entomology Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory, Seibersdorf. The major themes of the report include mass rearing and quality control in Tsetse fly and research on Medfly genetic sexing strains

  5. Annual report 1999

    International Nuclear Information System (INIS)

    1999-01-01

    This annual report presents an evaluation of activities of the Entomology Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory, Seibersdorf. The major themes of the report include mass rearing and quality control in Tsetse fly and research on Medfly genetic sexing strains

  6. Annual report 1997

    International Nuclear Information System (INIS)

    1997-01-01

    This annual report presents an evaluation of activities of the Entomology Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory, Seibersdorf. The major themes of the report include mass rearing and quality control in Tsetse fly and research on Medfly genetic sexing strains

  7. CSIR Annual report 1968

    CSIR Research Space (South Africa)

    CSIR

    1968-01-01

    Full Text Available This report presents the twenty fourth annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1968, to the 31st December 1968. Balance sheets and statements of income and expenditure...

  8. CSIR Annual report 1971

    CSIR Research Space (South Africa)

    CSIR

    1971-01-01

    Full Text Available This report presents the twenty seventh annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1971, to the 31st December 1971. Balance sheets and statements of income and expenditure...

  9. CSIR Annual report 1970

    CSIR Research Space (South Africa)

    CSIR

    1970-01-01

    Full Text Available This report presents the twenty sixth annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1970, to the 31st December 1970. Balance sheets and statements of income and expenditure...

  10. CSIR Annual report 1969

    CSIR Research Space (South Africa)

    CSIR

    1969-01-01

    Full Text Available This report presents the twenty fifth annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1969, to the 31st December 1969. Balance sheets and statements of income and expenditure...

  11. International energy annual, 1991

    International Nuclear Information System (INIS)

    1992-12-01

    This report is prepared annually and presents the latest information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Trade and reserves are shown for petroleum, natural gas, and coal. Prices are included for selected petroleum products. Production and consumption data are reported in standard units as well as British thermal units (Btu) and joules

  12. Uranium industry annual 1998

    International Nuclear Information System (INIS)

    1999-01-01

    The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

  13. KTA annual report 1980

    International Nuclear Information System (INIS)

    The annual report gives an overview of the rulemaking work in the individual fields as well as other activities, such as meetings, international codes of rules, and publications. KTA organization, including its administration and funds is listed. (orig./HP) [de

  14. IRI annual report 1989

    International Nuclear Information System (INIS)

    1990-01-01

    In this annual report of the Dutch Interfacultary Reactor Institute, summary reports are presented of current research and teaching activities during 1989 of the departments radiochemistry, radiation chemistry, radiation physics and reactor physics, operation and maintenance of, and experiments with the Delft Hoger Onderwijs reactor, nuclear instrumentation projects and supporting services. (H.W.). 145 refs.; 20 figs.; 4 fotos; 2 tabs

  15. Annual report 1981

    International Nuclear Information System (INIS)

    1982-01-01

    In this annual report the work done at the named Institute is described. This concerns particle and fields in the solar system, infrared astronomy, X-ray astronomy, γ-astronomy, and molecule spectroscopy. A list of publications is added. (HSI)

  16. ANCLI annual report 2003

    International Nuclear Information System (INIS)

    2003-01-01

    The National Association for the Information Local Commissions (ANCLI) was created in september 1999. This association aims to develop an exchange and information network for the information local commissions. In this framework it develops information sheets, Internet site, nuclear centers visits, colloquium and formations organizations. This report presents the annual activities for the year 2003. (A.L.B.)

  17. ANCLI annual report 2004

    International Nuclear Information System (INIS)

    2004-01-01

    The National Association for the Information Local Commissions (ANCLI) was created in september 1999. This association aims to develop an exchange and information network for the information local commissions. In this framework it develops information sheets, Internet site, nuclear centers visits, colloquium and formations organizations. This report presents the annual activities for the year 2004. (A.L.B.)

  18. Annual Report 2008

    Energy Technology Data Exchange (ETDEWEB)

    Keeley, N; Skalski, J [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2009-07-01

    The ''Annual Report 2008'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2008. Report consists of two parts. First one consists of general information about location, management, scientific council, personnel, financial support and conferences while the second one describes the scientific activity of Institute. A Foreword to all report written by Director of the Institute prof. Grzegorz Wrochna is also given.

  19. TIARA annual report 2004

    International Nuclear Information System (INIS)

    Ohara, Yoshihiro; Arakawa, Kazuo; Tanaka, Shigeru; Narumi, Kazumasa; Yoshida, Masaru; Itoh, Hisayoshi; Yoshikawa, Masato; Tanaka, Atsushi; Kobayashi, Yasuhiko; Fukuda, Mitsuhiro; Otsubo, Michiro; Yokota, Watalu; Nakamura, Yoshiteru

    2006-01-01

    This annual report describes research and development activities which have been performed with the TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 2004 to March 31, 2005. The 126 of the presented papers are indexed individually. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (J.P.N.)

  20. Annual Report 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The Institut Laue-Langevin (ILL) is an international research center using neutrons to probe the microscopic structure and dynamics of a broad range of materials. This annual report presents the ILL activities in 2000: the scientific highlights, the Millennium programme and the new developments, the workshops organized by the ILL, the experimental programme and the publications. (A.L.B.)

  1. International Energy Annual, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-14

    This report is prepared annually and presents the latest information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Trade and reserves are shown for petroleum, natural gas, and coal. Prices are included for selected petroleum products. Production and consumption data are reported in standard units as well as British thermal units (Btu) and joules.

  2. ANCLI annual report 2002

    International Nuclear Information System (INIS)

    2002-01-01

    The National Association for the Information Local Commissions (ANCLI) was created in september 1999. This association aims to develop an exchange and information network for the information local commissions. In this framework it develops information sheets, Internet site, nuclear centers visits, colloquium and formations organizations. This report presents the annual activities for the year 2002. (A.L.B.)

  3. Annual General Meetings

    OpenAIRE

    2009-01-01

    We have produced this information booklet to explain why companies must – by law – hold an Annual General Meeting (AGM). The laws which cover AGMs are known as the Companies Acts. This guide gives only a summary of the rules for AGMs. If you have a concern about the AGM of a particular company, you should get independent legal advice.

  4. Annual report 1981, annex

    International Nuclear Information System (INIS)

    1982-01-01

    This volume entitled ''Annex to the annual report'' deals in more detail with the scientific works of the I.L.L.: the scientific activity of theoricians; experimental reports on inelastic scattering in simple solids, crystallographic and magnetic structures, fluids and amorphous substances, imperfections, biology, chemistry

  5. Annual report 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This annual report presents an evaluation of activities of the Entomology Unit of the FAO/IAEA Agriculture and Biotechnology Laboratory, Seibersdorf. The major themes of the report include mass rearing and quality control in Tsetse fly and research on Medfly genetic sexing strains.

  6. Annual Report 2006

    International Nuclear Information System (INIS)

    Gawlikowicz, W.; Pienkowski, L.

    2007-03-01

    The Annual Report of the Heavy Ion Laboratory, Warsaw University describes the activities of Laboratory in 2006. The document consist of four parts: 'Laboratory Overview', 'Experiments and Experimental Set-ups', 'Experiments Using the Outside Facilities' and 'General Information on HIL Activities'. An 'Introduction' written by director of the Department prof. J. Jastrzebski is also given

  7. Annual report 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The annual report from IKU (Continental Shelf Institute) in Norway deals with the market adjustment of research activities at the institute as a result of offshore cost-cutting policy in the petroleum industry. The market is about to shift focus from volume to competence. In practice, that means buying competence instead of project ideas or proposals

  8. Annual report - ENERSUL - 1999

    International Nuclear Information System (INIS)

    2000-01-01

    The annual report of ENERSUL - Brazilian electric power distribution company - introduces the following main topics: Outlook for the State of Mato Grosso do Sul; strategic focus; financial performance; relation with investors; energy sold; capacity increases; customers; customers; energy balance; performance and quality; electric system; investments; people; human resources; synergies; awards; workplace safety; social balance; and patrimonial balance

  9. 2001 annual report

    International Nuclear Information System (INIS)

    2002-01-01

    This document is the 2001 annual report of the French union of the petroleum industry (UFIP). It summarizes the highlights of the petroleum industry activity in France in 2001 and gives some additional information about the production, refining and distribution of petroleum products in the rest of the world. (J.S.)

  10. Annual Report 2007

    International Nuclear Information System (INIS)

    Zielinska, M.; Gawlikowicz, W.

    2008-03-01

    The Annual Report of the Heavy Ion Laboratory, Warsaw University describes the activities of Laboratory in 2007. The document consist of four parts: '' Laboratory Overview '', '' Experiments and Experimental Set-ups '', '' Experiments Using the Outside Facilities '' and '' General Information on HIL Activities ''. An '' Introduction '' written by director of the Department prof. J. Jastrzebski is also given

  11. International Energy Annual, 1992

    International Nuclear Information System (INIS)

    1994-01-01

    This report is prepared annually and presents the latest information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Trade and reserves are shown for petroleum, natural gas, and coal. Prices are included for selected petroleum products. Production and consumption data are reported in standard units as well as British thermal units (Btu) and joules

  12. 2010 AAUW Annual Report

    Science.gov (United States)

    American Association of University Women, 2010

    2010-01-01

    This report highlights some of the outstanding accomplishments of AAUW (American Association of University Women) for fiscal year 2010. This year's annual report also features stories of remarkable women who are leading the charge to break through barriers and ensure that all women have a fair chance. Sharon is working to reduce the pay gap…

  13. Annual report - ESCELSA - 1999

    International Nuclear Information System (INIS)

    2000-01-01

    The annual report of 1999 of ESCELSA - Brazilian electric power company - introduces the next main topics: state of Espirito Santo; strategic focus; financial performance; relation with investors; energy sales; customers; quality; electric system; investments; people; resources; synergies; awards; outlook; social balancing; and patrimonial balancing

  14. IKF annual report 1988

    International Nuclear Information System (INIS)

    1989-01-01

    The annual report of 1988 gives a survey of the following category of themes: nuclear physics, atom physics, nuclear methods, nuclear solid-state physics and developments of machines. Apart from the use of its own Van de Graaff accelerators the institute takes part in joint ventures in research, for example with the GSI (Association for Heavy-Ion Research) in Darmstadt. (DG) [de

  15. Annual Report 2005

    International Nuclear Information System (INIS)

    Zielinska, M.; Gawlikowicz, W.; Pienkowski, L.

    2006-05-01

    The Annual Report of the Heavy Ion Laboratory, Warsaw University describes the activities of Laboratory in 2005. The document consist of four parts: Laboratory Overview, Experiments and Experimental Set-ups, Experiments Using the Outside Facilities and General Information on HIL Activities. An Introduction written by director of the Department prof. J. Jastrzebski is also given

  16. KVI Annual Report 1982

    International Nuclear Information System (INIS)

    1983-04-01

    This annual report offers 93 informative descriptions of the current research projects at the KVI cyclotron during 1982. The projects are classed under the following heads: elastic and inelastic scattering; giant resonances; transfer and charge exchange reactions; breakup reactions; heavy ion reactions; electromagnetic and weak interactions; theoretical nuclear physics; atomic physics; nuclear solid state physics; cyclotron, computers and instrumentation; nuclear medicine; environmental studies. (Auth.)

  17. NERSC Annual Report 2004

    Energy Technology Data Exchange (ETDEWEB)

    Hules, John; Bashor, Jon; Yarris, Lynn; McCullough, Julie; Preuss, Paul; Bethel, Wes

    2005-04-15

    The National Energy Research Scientific Computing Center (NERSC) is the premier computational resource for scientific research funded by the DOE Office of Science. The Annual Report includes summaries of recent significant and representative computational science projects conducted on NERSC systems as well as information about NERSC's current and planned systems and services.

  18. Annual report 1979

    International Nuclear Information System (INIS)

    1979-12-01

    In this annual report the work done at the named institute is described. This concerns experiments with synchrotron radiations, high energy physics experiments at the PETRA and DORIS storage rings, studies of MFS interactions, and some neutrino experiments at CERN. A list of publications is included. (HSI)

  19. Annual Report 2000

    International Nuclear Information System (INIS)

    2000-01-01

    The Institut Laue-Langevin (ILL) is an international research center using neutrons to probe the microscopic structure and dynamics of a broad range of materials. This annual report presents the ILL activities in 2000: the scientific highlights, the Millennium programme and the new developments, the workshops organized by the ILL, the experimental programme and the publications. (A.L.B.)

  20. Total 2004 annual report

    International Nuclear Information System (INIS)

    2004-01-01

    This annual report of the Group Total brings information and economic data on the following topics, for the year 2004: the corporate governance, the corporate social responsibility, the shareholder notebook, the management report, the activities, the upstream (exploration and production) and downstream (refining and marketing) operating, chemicals and other matters. (A.L.B.)

  1. NERSC Annual Report 2002

    Energy Technology Data Exchange (ETDEWEB)

    Hules, John

    2003-01-31

    The National Energy Research Scientific Computing Center (NERSC) is the primary computational resource for scientific research funded by the DOE Office of Science. The Annual Report for FY2002 includes a summary of recent computational science conducted on NERSC systems (with abstracts of significant and representative projects), and information about NERSC's current and planned systems and service

  2. Annual results 2004

    International Nuclear Information System (INIS)

    2005-01-01

    This 2004 annual evaluation of the french RTE company (electric power transport network) provides information on the 2004 results on: institutional information, financial results, customers and market, industrial resources, environment and consultation, human resources and international aspects. (A.L.B.)

  3. Annual report SNET 2003

    International Nuclear Information System (INIS)

    2004-01-01

    This annual report of the SNET (National Society of Electricity and thermic) presents the society activities and the financial report for the year 2003. The society position in the market, the environmental policy, the performance, the workers and financial data are detailed. (A.L.B.)

  4. Environment annual report 1993

    International Nuclear Information System (INIS)

    1994-01-01

    In the 1993 Environment Annual Report for BNFL, data are presented for radioactive discharges to the environment and their associated doses to the criteria group members of the public in the vicinity of Sellafield, Drigg, Chapelcross, Springfields and Capenhurst. Similarly, data are also presented for non-radioactive discharges to water and air for each site. (UK)

  5. NUFFIC Annual Report, 1977.

    Science.gov (United States)

    Netherlands Universities Foundation for International Co-operation, The Hague.

    The 1977 annual report of the Netherlands Universities Foundation for International Cooperation (NUFFIC) considers the following topics: major developments in work and policy; relationships NUFFIC has with other organizations; University Development Cooperation; developments in international education; the functioning of the Consultative Structure…

  6. CSIR Annual report 1967

    CSIR Research Space (South Africa)

    CSIR

    1967-01-01

    Full Text Available This report presents the twenty third annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1967, to the 31st December 1967. Balance sheets and statements of income and expenditure...

  7. Annual report 1982. Annex

    International Nuclear Information System (INIS)

    This is the scientific annual report 1982 of the ILL on R and D activities of the different colleges: fundamental and nuclear physics, inelastic scattering in simple solids, crystallographic and magnetic structures, fluids and amorphous substances, imperfections, biology, chemistry, theory. Abstracts of the publications published during the year are presented

  8. CSIR Annual report 1980

    CSIR Research Space (South Africa)

    CSIR

    1980-01-01

    Full Text Available This report presents the thirty-sixth annual report of the CSIR. The report covers the period 1 January, 1980 to 31 December 1980. A balance sheet and statements of income and expenditure for the financial year ended 31st March 1980, certified...

  9. NRCC annual report, 1979

    International Nuclear Information System (INIS)

    1980-11-01

    This annual report of the National Research for Computation in Chemistry (NRCC) Division describes the program of research workshops, software development, and scientific research of the Division in 1979. This year marked the first full calendar year of activity of the Division. Initial staffing in the core scientific areas was completed by the addition of a crystallographer

  10. GKSS annual report 1983

    International Nuclear Information System (INIS)

    1984-01-01

    This annual report reviews the structure and activities of the GKSS in 1983. R and D work was done on reactor safety engineering, environmental research/environmental engineering and underwater technology. It also reports on cooperation with outside partners, the organization, financing, and developments in the staff structure as well as on publications, lectures, applications for patents, etc. (UA) [de

  11. NERSC Annual Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Hules (Ed.), John

    2006-07-31

    The National Energy Research Scientific Computing Center (NERSC) is the premier computational resource for scientific research funded by the DOE Office of Science. The Annual Report includes summaries of recent significant and representative computational science projects conducted on NERSC systems as well as information about NERSC's current and planned systems and services.

  12. ELETRONUCLEAR - Annual report - 1997

    International Nuclear Information System (INIS)

    1998-01-01

    The annual activities report of 1997 of ELETRONUCLEAR - Brazilian company responsible by the electric power generation from the nuclear technology - introduces the next main topics: company vision and mission; energy production and commercialization; investments in the electric power generation; economic and financial situation; social balancing; and patrimonial balancing

  13. Mail Office annual closure

    CERN Multimedia

    2013-01-01

    On the occasion of the annual closure of CERN, there will be no mail distributed on Friday 20 December 2013 but mail will be collected in the morning. Nevertheless, you will still be able to bring your outgoing mail to Building 555-R-002 until 12 noon.  

  14. PTB annual report 1985

    International Nuclear Information System (INIS)

    1986-02-01

    The annual report presents general information on the institution's activities and the various departments, and reports on scientific work in the field of metrology and safety engineering. Brief scientific accounts refer to work in the domains of mechanics and acoustics, electricity, heat, optics, industrial metrology, atomic physics, technical and scientific services, collection and disposal of radioactive waste. (DG) [de

  15. Annual Report 2004

    International Nuclear Information System (INIS)

    Swiboda, G.

    2005-01-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2004. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiological protection and monitoring of environment; Nuclear techniques in health and environment protection and in last section the list of published in 2004 papers is presented

  16. NIKHEF Annual Report 1982

    International Nuclear Information System (INIS)

    1983-01-01

    In this annual report 1982, the NIKHEF research programs of high-energy physics, nuclear physics and radiochemistry is described in a wide context. Next, the reports of the individual projects of section-H and section-K are described in detail. Finally, the report gives some statistical information of publications, colloquia and co-workers. (Auth.)

  17. Annual report 1987

    International Nuclear Information System (INIS)

    1988-01-01

    In this annual report of the Dutch Interfacultary Reactor Institute, summary and detailed reports are presented of current research during 1987 of the departments radiochemistry, radiation chemistry, radiation physics and reactor physics. (H.W.). 61 refs.; 13 figs.; 14 tabs

  18. NIKHEF Annual Report 1981

    International Nuclear Information System (INIS)

    1982-01-01

    This annual report presents the activities of the Dutch National Institute for Nuclear and High Energy Physics (NIKHEF) during its first year. Following a general introduction to the research areas in which NIKHEF is involved, 29 brief reports from the project groups are presented. Details concerning personnel, participation in councils and committees, finances, publications, colloquia and participation in congresses and schools are included. (Auth.)

  19. Annual Report 2010

    International Nuclear Information System (INIS)

    Palacz, M.; Zielinska, M.

    2011-06-01

    The Annual Report of the Heavy Ion Laboratory, University of Warsaw describes the activities of Laboratory in 2010. The document consist of four parts: '' Laboratory Overview '', '' Experiments at HIL '', '' Experiments Using the Outside Facilities '' and '' Appendices '' where general information on HIL activities are described. An '' Introduction '' written by director of the Heavy Ion Laboratory prof. K. Rusek is also given.

  20. CSIR Annual report 1962

    CSIR Research Space (South Africa)

    CSIR

    1962-01-01

    Full Text Available This report presents the eighteenth annual report of the CSIR. The report covers the period 1 January, 1962 to 31 December 1962. A balance sheet and statements of income and expenditure for the financial year ended 31st March 1962, certified...

  1. CSIR Annual report 1983

    CSIR Research Space (South Africa)

    CSIR

    1983-01-01

    Full Text Available This report presents the thirty ninth annual report of the CSIR. The report covers the period 1 January, 1983 to 31 December 1983. A balance sheet and statements of income and expenditure for the financial year ended 31st March 1983, certified...

  2. CSIR Annual report 1981

    CSIR Research Space (South Africa)

    CSIR

    1981-01-01

    Full Text Available This report presents the thirty seventh annual report of the CSIR. The report covers the period 1 January, 1981 to 31 December 1981. A balance sheet and statements of income and expenditure for the financial year ended 31st March 1981, certified...

  3. CSIR Annual report 1982

    CSIR Research Space (South Africa)

    CSIR

    1982-01-01

    Full Text Available This report presents the thirty eighth annual report of the CSIR. The report covers the period 1 January, 1982 to 31 December 1982. A balance sheet and statements of income and expenditure for the financial year ended 31st March 1982, certified...

  4. CSIR Annual report 1963

    CSIR Research Space (South Africa)

    CSIR

    1963-01-01

    Full Text Available This report presents the nineteenth annual report of the Council for Scientific and Industrial Research. The report covers the period from the 1st January, 1963, to the 31st December 1963. Balance sheets and statements of income and expenditure...

  5. Sustainability Annual Report 2013

    OpenAIRE

    2013-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  6. Sustainability Annual Report 2014

    OpenAIRE

    2014-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  7. Sustainability Annual Report 2017

    OpenAIRE

    2017-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  8. Sustainability Annual Report 2011

    OpenAIRE

    2011-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  9. Sustainability Annual Report 2012

    OpenAIRE

    2012-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  10. Sustainability Annual Report 2015

    OpenAIRE

    2015-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  11. Sustainability Annual Report 2016

    OpenAIRE

    2016-01-01

    Every year, Virginia Tech releases a sustainability annual report to show the university’s progress in meeting the sustainability goals. The key sustainability metrics these reports cover include: greenhouse gas (GHG) emissions, energy use intensity, alternative transportation use, recycling, and water consumption.

  12. Annual Report 2008

    International Nuclear Information System (INIS)

    Keeley, N.; Skalski, J.

    2009-01-01

    The ''Annual Report 2008'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2008. Report consists of two parts. First one consists of general information about location, management, scientific council, personnel, financial support and conferences while the second one describes the scientific activity of Institute. A Foreword to all report written by Director of the Institute prof. Grzegorz Wrochna is also given

  13. Royal Dutch Petroleum Company annual report 1992

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The Royal Dutch Petroleum Company has no operations of its own and virtually the whole of its income derives from its 60% interest in the companies known collectively as the Royal Dutch/Shell Group of Companies; the other 40% is owned by the Shell Transport and Trading Company, p.l.c. The company is engaged in the oil, natural gas, chemicals, coal and metals businesses throughout the world. The annual report summarises the year's results and analyses earnings in each industry segment. Financial statements for the year ended 31 December 1992 are presented. The Group companies' estimated net quantities of crude oil, natural gas and coal are given

  14. 2017 Annual Disability Statistics Supplement

    Science.gov (United States)

    Lauer, E. A; Houtenville, A. J.

    2018-01-01

    The "Annual Disability Statistics Supplement" is a companion report to the "Annual Disability Statistics Compendium." The "Supplement" presents statistics on the same topics as the "Compendium," with additional categorizations by demographic characteristics including age, gender and race/ethnicity. In…

  15. Fourth annual report 1991

    International Nuclear Information System (INIS)

    1991-01-01

    The Independent Radiation Monitoring Scheme for Clwyd began its monitoring programme in Clwyd in 1988. This is the fourth report on the results of the radiation monitoring carried out within Clwyd. The historical reasons for the conception of the Radiation Monitoring Scheme are given in the First Annual Report together with the protocol of operation and detailed sampling and monitoring information. The fourth Annual Report identifies any changes in techniques that have occurred in the last twelve months together with the latest monitoring and analytical data. Samples of air, beach materials, coastal sand and silt, seaweed, meat, fish and milk were taken from various locations within the county. No significant charges in radiation levels were found when compared with data from previous years. The values have remained within the range currently being expected throughout the United Kingdom. (author)

  16. Renewable energy annual 1995

    International Nuclear Information System (INIS)

    1995-12-01

    The Renewable Energy Annual 1995 is the first in an expected series of annual reports the Energy Information Administration (EIA) intends to publish to provide a comprehensive assessment of renewable energy. This report presents the following information on the history, status, and prospects of renewable energy data: estimates of renewable resources; characterizations of renewable energy technologies; descriptions of industry infrastructures for individual technologies; evaluations of current market status; and assessments of near-term prospects for market growth. An international section is included, as well as two feature articles that discuss issues of importance for renewable energy as a whole. The report also contains a number of technical appendices and a glossary. The renewable energy sources included are biomass (wood), municipal solid waste, biomass-derived liquid fuels, geothermal, wind, and solar and photovoltaic

  17. Annual General Asssembly

    CERN Document Server

    Pension Fund

    2005-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Council Chamber on Thursday 13 October 2005 at 14:30 The Agenda comprises: Opening Remarks (J. Bezemer) Results and presentation of the Annual Report 2004 - Role of asset classes in pension funds (C. Cuénoud). Copies of the 2004 Report are available from departmental secretariats. Package of measures aiming at equilibrating the Fund - Proposals by the Governing Board (J.-P. Matheys). Questions from members and beneficiaries. Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (J. Bezemer). As usual, participants are invited to drinks after the assembly. NB The minutes of the 2004 General Assembly are available from the Administration of the Fund (tel.(+4122)767 27 42; e-mail Sophia.Revol@cern.ch)

  18. Annual General Asssembly

    CERN Multimedia

    2005-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual General Asssembly to be held in the CERN Council Chamber on Thursday 13 October 2005 at 14:30 The Agenda comprises: Opening Remarks (J. Bezemer) Results and presentation of the Annual Report 2004 - Role of asset classes in pension funds (C. Cuénoud) Copies of the 2004 Report are available from departmental secretariats. Package of measures aiming at equilibrating the Fund - Proposals by the Governing Board (J.-P. Matheys) Questions from members and beneficiaries Persons wishing to ask questions are encouraged to submit them, where possible, in writing in advance, addressed to Mr C. Cuénoud, Administrator of the Fund. Conclusions (J. Bezemer) As usual, participants are invited to drinks after the assembly. NB The minutes of the 2004 General Assembly are available from the Administration of the Fund (tel.(+4122)767 27 42; e-mail Sophia.Revol@cern.ch)

  19. Coal industry annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  20. Annual recertification: fun? Wow!

    Science.gov (United States)

    Amos, A

    1994-01-01

    Learning is critical to fostering a knowledge base required for maintaining currency and furthering professional development. In the ever-changing field of nephrology, most skills practised in nursing are considered to be sanctioned medical acts or added nursing skills. Therefore, annual recertification of the skills designated as sanctioned medical acts is an expectation of the College of Nurses of Ontario. The Wellesley Hospital policy indicates one time only or annual approval of the added nursing skills. The article will discuss the use of games as a creative, non-threatening educational tool in the recertification/re-approval process currently in place at The Wellesley Hospital, renal programs. In the past two years, several games or alternative teaching strategies have been utilized to assist the staff in preparing for recertification. This paper will examine the advantages and disadvantages of utilizing alternative teaching formats. Commentary regarding the response of staff nurses, nursing management and education will be highlighted.

  1. Annual Energy Review 2007

    Energy Technology Data Exchange (ETDEWEB)

    Seiferlein, Katherine E. [USDOE Energy Information Administration (EIA), Washington, DC (United States)

    2008-06-01

    The Annual Energy Review (AER) is the Energy Information Administration's (EIA) primary report of annual historical energy statistics. For many series, data begin with the year 1949. Included are data on total energy production, consumption, and trade; overviews of petroleum, natural gas, coal, electricity, nuclear energy, renewable energy, international energy, as well as financial and environment indicators; and data unit conversion tables. Publication of this report is required under Public Law 95–91 (Department of Energy Organization Act), Section 205(c), and is in keeping with responsibilities given to the EIA under Section 205(a)(2), which states: “The Administrator shall be responsible for carrying out a central, comprehensive, and unified energy data and information program which will collect, evaluate, assemble, analyze, and disseminate data and information....”

  2. Petroleum marketing annual 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-24

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners` acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date.

  3. NAGRA Annual report 2010

    International Nuclear Information System (INIS)

    2011-04-01

    This annual report presents the highlights of the activities carried out by the Swiss National Co-operative for the Disposal of Radioactive Wastes NAGRA during the year 2010. These include reviews by various commissions of the NAGRA co-operative's proposals for possible sites for nuclear waste repositories. Also, the enhancements made concerning information facilities for the general public at the co-operative's rock laboratories are mentioned. The operation of initial satellite-based precision measurement systems for movements in the earth's crust is noted. Organisational aspects and international co-operation are discussed. This annual report also looks at NAGRA's organisational structures and its commercial accounts. Appendices provide details on waste inventories and volumes and publications made in 2010. A selection of relevant internet addresses is also provided

  4. 1986 Annual Report

    International Nuclear Information System (INIS)

    1987-01-01

    This annual report describes the reasearch activity carried out during 1986 by the Fusion Department of the Italian Commision for Nuclear and Alternative Energy Sources (ENEA). The report outlines the main results obtained by the three major projects of the Fusion Department (Fusion Physics, Frascati Tokamak Upgrade, and Fusion Reactor Engineering), plus the divisional project Inertial Confinement mentioned separately because of its particular scientific content. Most of the research work was performed by the Fusion Department at its location at the ENEA Frascati Energy Research Center, but some work was also done elsewhere, or with recourse to other ENEA departments. The research activity described in this annual report was carried out with the frame of the Association Euratom-ENEA on Fusion, with the exception of some minor activities

  5. NAGRA Annual report 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-04-15

    This annual report presents the highlights of the activities carried out by the Swiss National Co-operative for the Disposal of Radioactive Wastes NAGRA during the year 2010. These include reviews by various commissions of the NAGRA co-operative's proposals for possible sites for nuclear waste repositories. Also, the enhancements made concerning information facilities for the general public at the co-operative's rock laboratories are mentioned. The operation of initial satellite-based precision measurement systems for movements in the earth's crust is noted. Organisational aspects and international co-operation are discussed. This annual report also looks at NAGRA's organisational structures and its commercial accounts. Appendices provide details on waste inventories and volumes and publications made in 2010. A selection of relevant internet addresses is also provided

  6. International energy annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-04-01

    The International Energy Annual presents an overview of key international energy trends for production, consumption, imports, and exports of primary energy commodities in over 220 countries, dependencies, and areas of special sovereignty. Also included are population and gross domestic product data, as well as prices for crude oil and petroleum products in selected countries. Renewable energy reported in the International Energy Annual includes hydroelectric power and geothermal, solar, and wind electric power. Also included are biomass electric power for Brazil and the US, and biomass, geothermal, and solar energy produced in the US and not used for electricity generation. This report is published to keep the public and other interested parties fully informed of primary energy supplies on a global basis. The data presented have been largely derived from published sources. The data have been converted to units of measurement and thermal values (Appendices E and F) familiar to the American public. 93 tabs.

  7. Renewable energy annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The Renewable Energy Annual 1995 is the first in an expected series of annual reports the Energy Information Administration (EIA) intends to publish to provide a comprehensive assessment of renewable energy. This report presents the following information on the history, status, and prospects of renewable energy data: estimates of renewable resources; characterizations of renewable energy technologies; descriptions of industry infrastructures for individual technologies; evaluations of current market status; and assessments of near-term prospects for market growth. An international section is included, as well as two feature articles that discuss issues of importance for renewable energy as a whole. The report also contains a number of technical appendices and a glossary. The renewable energy sources included are biomass (wood), municipal solid waste, biomass-derived liquid fuels, geothermal, wind, and solar and photovoltaic.

  8. Nagra annual report 2013

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    This annual report made by the Swiss National Cooperative for the Disposal of Radioactive Waste (NAGRA) takes a look at the cooperative’s activities and work done in 2013. Nagra’s task is recapitulated. Developments in 2013 concerning legislation, inventories of radioactive materials, sectorial planning and scientific and technical aspects are examined. Work done in the rock laboratories, in the public relations sector and consulting areas is looked at. Nagra’s organizational structure with its management, commissions and auditors is commented on and an organigram of the head office is presented. On the financial side of things, the annual financial statement with incomes, cash flow and accumulated accounts is presented as is the report made by the statutory auditors. An appendix to the report contains details on waste inventories and volumes, a list publications made in 2012 as well as Internet addresses and a glossary.

  9. Petroleum marketing annual 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Petroleum Marketing Annual (PMA) provides information and statistical data on a variety of crude oils and refined petroleum products. The publication presents statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysis, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the fob and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Refined petroleum product sales data include motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane. The Petroleum Marketing Division, Office of Oil and Gas, Energy Information Administration ensures the accuracy, quality, and confidentiality of the published data in the Petroleum Marketing Annual. For this production, all estimates have been recalculated since their earlier publication in the Petroleum Marketing Monthly (PMM). These calculations made use of additional data and corrections that were received after the PMM publication date

  10. Nagra annual report 2013

    International Nuclear Information System (INIS)

    2014-01-01

    This annual report made by the Swiss National Cooperative for the Disposal of Radioactive Waste (NAGRA) takes a look at the cooperative’s activities and work done in 2013. Nagra’s task is recapitulated. Developments in 2013 concerning legislation, inventories of radioactive materials, sectorial planning and scientific and technical aspects are examined. Work done in the rock laboratories, in the public relations sector and consulting areas is looked at. Nagra’s organizational structure with its management, commissions and auditors is commented on and an organigram of the head office is presented. On the financial side of things, the annual financial statement with incomes, cash flow and accumulated accounts is presented as is the report made by the statutory auditors. An appendix to the report contains details on waste inventories and volumes, a list publications made in 2012 as well as Internet addresses and a glossary

  11. Coal industry annual 1997

    International Nuclear Information System (INIS)

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs

  12. 2017 Annual Technology Baseline

    Energy Technology Data Exchange (ETDEWEB)

    Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hand, M. M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Eberle, Annika [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Beiter, Philipp C [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Kurup, Parthiv [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Turchi, Craig S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Feldman, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Augustine, Chad R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Maness, Michael [Formerly NREL; O' Connor, Patrick [Oak Ridge National Laboratory

    2018-03-26

    Consistent cost and performance data for various electricity generation technologies can be difficult to find and may change frequently for certain technologies. With the Annual Technology Baseline (ATB), the National Renewable Energy Laboratory annually provides an organized and centralized set of such cost and performance data. The ATB uses the best information from the Department of Energy national laboratories' renewable energy analysts as well as information from the Energy Information Administration for fuel-based technologies. The ATB has been reviewed by experts and it includes the following electricity generation technologies: land-based wind, offshore wind, utility-scale solar photovoltaics (PV), commercial-scale solar PV, residential-scale solar PV, concentrating solar power, geothermal power, hydropower, coal, natural gas, nuclear, and conventional biopower. This webinar presentation introduces the 2017 ATB.

  13. TIARA annual report 1999

    Energy Technology Data Exchange (ETDEWEB)

    Saidoh, Masahiro; Toraishi, Akio; Itoh, Hisayoshi [eds.; Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; and others

    2000-10-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 1999 to March 31, 2000. Summary reports of 106 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  14. TIARA annual report 2000

    Energy Technology Data Exchange (ETDEWEB)

    Saidoh, Masahiro; Toraishi, Akio; Namba, Hideki [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment; and others

    2001-11-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 2000 to March 31, 2001. Summary reports of 103 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  15. Annual report 2005

    International Nuclear Information System (INIS)

    2005-01-01

    Areva is a world energy expert on technological solutions for nuclear power generation and electricity transmission and distribution. This 2005 annual report provides information on the Group results in the following domains: information pertaining to the transaction, general information on the company and share capital, information on company operations, new developments and future prospects, assets, financial position, financial performance, corporate governance, recent developments and outlook. (A.L.B.)

  16. Uranium industry annual, 1988

    International Nuclear Information System (INIS)

    1989-01-01

    This report presents data on US uranium raw materials and marketing activities of the domestic uranium industry. It contains aggregated data reported by US companies on the ''Uranium Industry Annual Survey'' (1988), Form EIA-858, and historical data from prior data collections and other pertinent sources. The report was prepared by the Energy Information Administration (EIA), the independent agency for data collection and analysis with the US Department of Energy

  17. Annual Report 2006

    International Nuclear Information System (INIS)

    Swiboda, G.

    2007-01-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2006. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiation protection and dosimetry; Nuclear Technology in Energy Generation; Solid State Physics; Nuclear techniques in Health and Environment Protection management of Hazards and in last section the list of published in 2006 papers, conferences, seminars, workshops, research projects and educational activities are presented

  18. Risoe annual report 1987

    International Nuclear Information System (INIS)

    1988-06-01

    An explanation of Risoe National Laboratory's function within the Danish research system is followed by brief accounts of research activities at Risoe during 1987. Energy resources, technology and policy are discussed, the annual accounts are presented, a guide to the National Laboratory and a list of its publications are given. Some of the research activities that took place in 1987 described in more detail are within the fields of chemistry and the environment, superconductivity, new aspects of powdery mildew, polymers and robotics. (AB)

  19. Annual Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Swiboda, G [Institute of Atomic Energy, Otwock-Swierk (Poland)

    2006-07-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2005. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiological protection and dosimetry; Nuclear Technology in Energy Generation; Solid State Physics; Nuclear techniques in Health and Environment Protection management of Hazards and in last section the list of published in 2004 papers, conferences, seminars, workshops, research projects and educational activities are presented.

  20. Annual Report 1985

    International Nuclear Information System (INIS)

    Muenze, R.

    1986-06-01

    This annual report covers the work carried out at the Radioisotope Department, ZfK Rossendorf, during the year 1985. It contains 12 contributions related to the development of processes for generating radioisotopes, 23 contributions related to the synthesis of radioactive compounds, and 26 contributions related to the characterization of radioactive compounds. All contributions are published in summary form only and are individually processed for the INIS database. Additionally, a list is given of publications and lectures issued between January and December 1985

  1. ILL Annual Report 1974

    International Nuclear Information System (INIS)

    1974-01-01

    This annual report provides a general view of the activities of the different sections of the ILL. In 1974, twenty-two different neutron spectrometers with different characteristics were available on a regular basis. Moreover, a number of special neutron sources were employed for on-line experiments. The major effort was devoted to an increase in experimental systems and to the development of new measurement techniques [fr

  2. OPEC annual report 1983

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    This annual report is concerned with the following items: the general economic situation of OPEC member countries, other developing countries and the industrial countries; energy market developments (environment, crude oil, crude oil prices, oil stock movements); upstream and downstream activities (exploration, production and reserves, refining, petrochemicals, hydrocarbon transportation, legislation, contracts and agreements in Member Countries); activities of the Secretariat. The annexes contain statistical data, press releases and resolutions and a schedule of member Country representatives and officials of the Secretariat.

  3. Annual report 1983

    International Nuclear Information System (INIS)

    Van de Vyver, R.E.

    1983-01-01

    In 1983, the various research projects in which the nuclear physics laboratory of Ghent State University is involved, were continued. In the present Annual Report, the results obtained in the field of photofission, photonuclear reactions positron annihilation, dosimetry and nuclear theory are summarized. The new 10 MeV high duty factor linear electron accelerator is presently being installed: performance tests will be carried out until July 1984; after which this facility will gradually become available for nuclear research purposes. (AF)

  4. Annual Report 2005

    International Nuclear Information System (INIS)

    Swiboda, G.

    2006-01-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2005. The document consist of seven parts: General Information; Operation and safety of MARIA reactor; Radiological protection and dosimetry; Nuclear Technology in Energy Generation; Solid State Physics; Nuclear techniques in Health and Environment Protection management of Hazards and in last section the list of published in 2004 papers, conferences, seminars, workshops, research projects and educational activities are presented

  5. Annual report 1980

    International Nuclear Information System (INIS)

    1980-12-01

    In this annual report a survey is given about the research programs of the named institute during 1980. The research concerns experiments with synchrotron radiation, hyperfine structure studies, experiments with the DORIS and PETRA storage rings, and experiments at the CERN accelerators. Furthermore the development of instruments in this institute is described. In addition a list of publications, contributions to conferences, and theses of this institute is given. (HSI)

  6. NERSC 1998 annual report

    Energy Technology Data Exchange (ETDEWEB)

    Hules, John (ed.)

    1999-03-01

    This 1998 annual report from the National Scientific Energy Research Computing Center (NERSC) presents the year in review of the following categories: Computational Science; Computer Science and Applied Mathematics; and Systems and Services. Also presented are science highlights in the following categories: Basic Energy Sciences; Biological and Environmental Research; Fusion Energy Sciences; High Energy and Nuclear Physics; and Advanced Scientific Computing Research and Other Projects.

  7. TIARA annual report 2003

    International Nuclear Information System (INIS)

    Ohara, Yoshiro; Arakawa, Kazuo; Tanaka, Shigeru; Naramoto, Hiroshi; Yoshida, Masaru; Itoh, Hisayosi; Yoshikawa, Masato; Tanaka, Atsushi; Kobayashi, Yasuhiko; Fukuda, Mitsuhiro; Otsubo, Michiaki; Tajima, Satoshi; Tanaka, Susumu

    2004-11-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 2003 to March 31, 2004. Summary reports of 115 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  8. Annual Pension Fund Update

    CERN Multimedia

    Pension Fund

    2011-01-01

    All members and beneficiaries of the Pension Fund are invited to attend the Annual Pension Fund Update to be held in the CERN Council Chamber on Tuesday 20 September 2011 from 10-00 to 12-00 a.m. Copies of the 2010 Financial Statements are available from departmental secretariats. Coffee and croissants will be served prior to the meeting as of 9-30 a.m.

  9. Annual Report 1979

    International Nuclear Information System (INIS)

    1980-01-01

    This annual report from the Netherlands Centre for Energy Research, includes the progress made in the five main research areas: fission energy, nuclear fusion and superconductivity, combustion energy (including environmental research), current energy and non-energetic applications of nuclear fission. Studies performed by the Energy Study Centrum, a department within ECN, and the Bureau for Energy Research Projects are described. A financial report is presented and a list of publications included. (C.F.)

  10. Annual report ISIS

    International Nuclear Information System (INIS)

    Biggin, S.

    1988-07-01

    The paper presents the 1988 Annual Report for ISIS (United Kingdom). A description is given of the accelerator and target station. The capability of ISIS is described including the facilities available and the type of science carried out using the instruments. The development and support activities are outlined, along with the ISIS organisation and user interaction. The appendix contains experimental reports on research work conducted at ISIS. (U.K.)

  11. Annual Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Michalik, J; Smulek, W; Godlewska-Para, E [eds.

    2006-07-01

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes the activities of the Institute in 2005. The document consist of four parts: (1) Radiation chemistry and physics, radiation technologies; (2) Radiochemistry, stable isotopes, nuclear analytical methods, general chemistry; (3) Radiobiology; (4) Nuclear technologies and methods. In total - 73 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity and the international cooperation is also listed.

  12. Annual Report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Swiboda, G [Institute of Atomic Energy, Otwock-Swierk (Poland)

    2008-07-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2007. The document consist of eight parts: General Information; Operation and safety of MARIA reactor; Radiation protection and dosimetry; Nuclear technology in energy generation; Condensed matter physics; Nuclear techniques in health and environment protection management of hazards; Radioisotope center POLATOM and in last section in which the lists of published in 2007 papers, conferences, seminars, workshops, research projects and educational activities are presented.

  13. Annual Report 2007

    International Nuclear Information System (INIS)

    Swiboda, G.

    2008-01-01

    The Annual Report of the Institute of Atomic Energy describes the results of the research activities carried out in 2007. The document consist of eight parts: General Information; Operation and safety of MARIA reactor; Radiation protection and dosimetry; Nuclear technology in energy generation; Condensed matter physics; Nuclear techniques in health and environment protection management of hazards; Radioisotope center POLATOM and in last section in which the lists of published in 2007 papers, conferences, seminars, workshops, research projects and educational activities are presented

  14. Annual report 2005

    International Nuclear Information System (INIS)

    2005-01-01

    This annual report of the Group Gaz de France presents the activities for the year 2005 in four main chapters: the group profile, the governance and the challenges; the energy and services display and the infrastructures; the capital opening and some key data; the group collaborators, the energy conservation, the research programs and the future of the gas and the electricity. (A.L.B.)

  15. TIARA annual report 2002

    International Nuclear Information System (INIS)

    2003-11-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 2002 to March 31, 2003. Summary reports of 113 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  16. Annual Report 2005

    International Nuclear Information System (INIS)

    Kirejczyk, M.K.

    2006-01-01

    The Annual Report of the Nuclear Physics Division, Institute of Experimental Physics, Warsaw University describes the results of the research activities carried out in 2005. The document consist of three parts: ''Research Reports on Reaction Mechanism and Nuclear Structure'', ''Research Reports on Experimental Methods and Instrumentation'' and ''Seminars, Personnel and Publications''. The short description of the whole NPD activity is also given in ''Preface'' written by director of the Department prof. K. Siwek-Wilczynska

  17. Annual Report 2006

    International Nuclear Information System (INIS)

    Chmielewska, D.; Infeld, E.; Zupranski, P.

    2007-06-01

    The ''Annual Report 2006'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2006. Report consists in general two parts. First consists of general information about location, management, scientific council, personnel, financial support and conferences while the second one the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to report written by Director of the Institute Grzegorz Wrochna is also given

  18. Annual Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewska, D; Infeld, E; Zupranski, P [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2007-06-15

    The ''Annual Report 2006'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2006. Report consists in general two parts. First consists of general information about location, management, scientific council, personnel, financial support and conferences while the second one the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to report written by Director of the Institute Grzegorz Wrochna is also given.

  19. IKF - annual report 1982

    International Nuclear Information System (INIS)

    Schmidt-Boecking, H.; Steuer, E.

    This annual report contains extended abstracts about the work performed in the named institute during 1982 together with a list of publications. The work concerns nuclear structure and nuclear reactions, high-energetic heavy ion physics, heavy ion-atom collisions, nuclear solidstate physics, solid-state particle detectors, the application of nuclear methods and mass spectroscopy, ion source development, instrumental development and data processing, interdisciplinary cooperation, as well as the Van de Graaf accelerator facilities. (HSI) [de

  20. Annual Report 2000

    International Nuclear Information System (INIS)

    2000-01-01

    This annual report gives the activities during the year 2000 and information about the General Direction of the Energy and Raw Materials (DGEMP) in France. The highlights of the year are discussed in the main following topics: public utilities, the Erika oil slick, the petroleum products prices increase, the energy efficiency national program, Eole 2005, the nuclear industry management. The french energy accounting, the publications and the organization of the DGEMP are also provided. (A.L.B.)

  1. Total - annual report 2005

    International Nuclear Information System (INIS)

    2006-01-01

    This annual report presents the activities and results of TOTAL S.A., french society on oil and gas. It deals with statistics, the managers, key information on financial data and risk factors, information on the Company, unresolved Staff Comments, employees, major Shareholders, consolidated statements, markets, security, financial risks, defaults dividend arrearages and delinquencies, controls and procedures, code of ethics and financial statements. (A.L.B.)

  2. 2008 annual merit review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2009-01-18

    The 2008 DOE Vehicle Technologies Program Annual Merit Review was held February 25-28, 2008 in Bethesda, Maryland. The review encompassed all of the work done by the Vehicle Technologies Program: a total of 280 individual activities were reviewed, by a total of just over 100 reviewers. A total of 1,908 individual review responses were received for the technical reviews, and an additional 29 individual review responses were received for the plenary session review.

  3. Annual report 2000

    International Nuclear Information System (INIS)

    2000-01-01

    This year 2000 annual report of the CEA (atomic energy commissariat) gives a general overview of the CEA activities and organization in the domains of the defence, the nuclear energy the technological research and the fundamental research. It is presented in seven main parts: contribution to national defence, civil nuclear research, technological research for the industry, pushing back the frontiers of scientific knowledge in physics and life science, mastery of installations; institute for protection and nuclear safety, research resources. (A.L.B.)

  4. NSLS annual report 1984

    Energy Technology Data Exchange (ETDEWEB)

    Klaffky, R.; Thomlinson, W. (eds.)

    1984-01-01

    The first comprehensive Annual Report of the National Synchrotron Light Source comes at a time of great activity and forward motion for the facility. In the following pages we outline the management changes that have taken place in the past year, the progress that has been made in the commissioning of the x-ray ring and in the enhanced utilization of the uv ring, together with an extensive discussion of the interesting scientific experiments that have been carried out.

  5. CRPP Annual report 1990

    International Nuclear Information System (INIS)

    1991-05-01

    This annual report presents the activities of the CRPP in the domain of fusion and points out the main results and events of the past year. For the sake of clarity the activities have been grouped under five headings, resulting in sections of unequal size. These are: tokamak physics, development of new diagnostics, theory and numerical simulation, non-linear plasma physics and development of microwave sources. figs., tabs., refs

  6. TIARA annual report 1997

    International Nuclear Information System (INIS)

    Tanaka, Ryuichi; Saido, Masahiro; Nashiyama, Isamu

    1998-10-01

    This annual report describes research activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 1997 to March 31, 1998. Summary reports of 90 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  7. Annual Report 2008

    International Nuclear Information System (INIS)

    Zielinska, M.; Gawlikowicz, W.

    2009-06-01

    The Annual Report of the Heavy Ion Laboratory, University of Warsaw describes the activities of Laboratory in 2008. The document consist of four parts: '' Laboratory Overview '', '' Experiments and Experimental Set-ups '', '' Experiments Using the Outside Facilities '' and '' General Information on HIL Activities ''. An '' Introduction '' written by directors of the Heavy Ion Laboratory: prof. J. Jastrzebski, prof. J. Kownacki and prof. K. Rusek is also given

  8. TIARA annual report 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This annual report describes research activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 1996 to March 31, 1997. Summary reports of 88 papers and 4 brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (J.P.N.)

  9. Annual Report 2005

    International Nuclear Information System (INIS)

    Michalik, J.; Smulek, W.; Godlewska-Para, E.

    2006-01-01

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes the activities of the Institute in 2005. The document consist of four parts: (1) Radiation chemistry and physics, radiation technologies; (2) Radiochemistry, stable isotopes, nuclear analytical methods, general chemistry; (3) Radiobiology; (4) Nuclear technologies and methods. In total - 73 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity and the international cooperation is also listed

  10. Annual report 1976

    International Nuclear Information System (INIS)

    1977-02-01

    In part 1, the annual report informs of the organizational and administrative development of the Bundesanstalt, in its 2nd part it presents a survey of scientific activities in 1976, examinations carried out, measuring devices and operational equipment given permission to, and cooperation in national and international bodies. The 3rd part contains scientific summaries of activities published and not published, which were either concluded in the year under review or which came to some interim results. (orig.) [de

  11. 2002 Annual report

    International Nuclear Information System (INIS)

    2003-01-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (ARN) of the Argentina during 2002. The following activities and developed topic in this report describe: radiation and nuclear safety, safeguards, physical protection, transport of radioactive materials, regulatory guides and standards, inspections, licensing, emergency systems, occupational and environmental surveillance, institutional relations with national and international organizations, training courses, information systems, human and economic resources

  12. CSIR Annual report 2003

    CSIR Research Space (South Africa)

    CSIR

    2003-01-01

    Full Text Available ACHIEVEMENTS OF OUR PEOPLE 14 THE STATE OF SCIENCE AND TECHNOLOGY IN THE CSIR 15 ANNUAL FINANCIAL STATEMENTS 20 CORPORATE GOVERNANCE 20 CSIR BOARD MEMBERS 24 REPORT OF THE AUDIT COMMITTEE 26 REPORT OF THE AUDITOR GENERAL 27 EXECUTIVE REPORT 28 FIVE..., which followed research and development of new technology related to the Hoodia plant, dubbed P57. Clinical trials relating to the product continue internationally. World-class genomics research > The African Centre for Gene Technologies, established...

  13. 2012 CPES Annual Report

    OpenAIRE

    Virginia Tech. Center for Power Electronics Systems

    2012-01-01

    The Center for Power Electronics Systems at Virginia Tech is a research center dedicated to improving electrical power processing and distribution that impact systems of all sizes – from battery – operated electronics to vehicles to regional and national electrical distribution systems. Our mission is to provide leadership through global collaborative research and education for creating advanced electric power processing systems of the highest value to society. CPES, with annual research expe...

  14. GSF - annual report 1976

    International Nuclear Information System (INIS)

    1976-01-01

    The annual report of the GSF for 1976 describes in brief contributions and surveys the activities of the institutes for biology, microbiology, radiation botany, biochemistry, hematology, medical data processing, ecological chemistry, radiation protection, radiohydrometry, underground disposal, as well as the activities of associated departments and activities of the special departments for algae R+D, for toxicology, for coherent optics and of the physical-technical department. (HK) [de

  15. NSLS annual report 1984

    International Nuclear Information System (INIS)

    Klaffky, R.; Thomlinson, W.

    1984-01-01

    The first comprehensive Annual Report of the National Synchrotron Light Source comes at a time of great activity and forward motion for the facility. In the following pages we outline the management changes that have taken place in the past year, the progress that has been made in the commissioning of the x-ray ring and in the enhanced utilization of the uv ring, together with an extensive discussion of the interesting scientific experiments that have been carried out

  16. Annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    Broda, R; Lesniak, L; Malecki, P; Stachura, Z; Wojciechowski, H [eds.

    1993-12-31

    The material presented describing the scientific activities of the Henryk Niewodniczanski Institute of Nuclear Physics in 1991 is the first annual report in several years.The arrangement of the report from various departments reflect the present structure of the Institute and is meant to help in the future task of reconstructing the Institute. Few guidelines proposed by the editorial board gave the individual departments much freedom in selecting the material and choosing the volume and format of presentation. (author).

  17. Annual report 1976

    International Nuclear Information System (INIS)

    Nilsson, A.

    1976-01-01

    This annual report contains research reports from the various groups of the Research Institute of Physics, Stockholm. Reports are made by workers in the Atomic and Molecular Physics group, the Surface Physics group, the Nuclear Physics group, the group researching into High Energy Physics and related topics and the Instrumentation and Methods group. The report also contains a list of the papers published by members of the Institute during the year and a list of the theses which were presented. (B.D.)

  18. Annual report 1991

    International Nuclear Information System (INIS)

    Broda, R.; Lesniak, L.; Malecki, P.; Stachura, Z.; Wojciechowski, H.

    1992-01-01

    The material presented describing the scientific activities of the Henryk Niewodniczanski Institute of Nuclear Physics in 1991 is the first annual report in several years.The arrangement of the report from various departments reflect the present structure of the Institute and is meant to help in the future task of reconstructing the Institute. Few guidelines proposed by the editorial board gave the individual departments much freedom in selecting the material and choosing the volume and format of presentation. (author)

  19. Annual report 1991

    Energy Technology Data Exchange (ETDEWEB)

    Broda, R.; Lesniak, L.; Malecki, P.; Stachura, Z.; Wojciechowski, H. [eds.

    1992-12-31

    The material presented describing the scientific activities of the Henryk Niewodniczanski Institute of Nuclear Physics in 1991 is the first annual report in several years.The arrangement of the report from various departments reflect the present structure of the Institute and is meant to help in the future task of reconstructing the Institute. Few guidelines proposed by the editorial board gave the individual departments much freedom in selecting the material and choosing the volume and format of presentation. (author).

  20. TIARA annual report 2001

    International Nuclear Information System (INIS)

    Saidoh, Masahiro; Ohara, Yoshihiro; Namba, Hideki

    2002-11-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 2001 to March 31, 2002. Summary reports of 109 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  1. TIARA annual report 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-10-01

    This annual report describes research and development activities which have been performed with the JAERI TIARA (Takasaki Ion Accelerators for Advanced Radiation Application) facilities from April 1, 1998 to March 31, 1999. Summary reports of 95 papers and brief descriptions on the status of TIARA in the period are contained. A list of publications, the type of research collaborations and organization of TIARA are also given as appendices. (author)

  2. 2002 annual report

    International Nuclear Information System (INIS)

    2003-01-01

    Delivering products and services to nuclear power plants operators, AREVA operates in every sector of the civilian nuclear power and fuel cycle industry. This annual report 2002 provides information on financial highlights, corporate governance, organization of the Group, share, sustainable development policy (integration into the management practices, financial and environmental responsibility, responsibility to the employees and to the society), nuclear power (front end division, reactors and services division, back end division), connectors division, equity interests and financial report. (A.L.B.)

  3. Annual report 1979

    International Nuclear Information System (INIS)

    1980-01-01

    The 1979 annual report of HMI presents information on the major scientific findings of this year in the fields of nuclear and radiation physics, radiation chemistry, radiochemistry, data processing and electronics as well as on the scientific cooperation with universities, institutions, and the industry. The general development of HMI, its structure and organisation are reviewed. A detailed list of publications and lectures (also by foreign guests of HMI) in the various fields of research is given. (RB) [de

  4. NIKHEF annual report 1983

    International Nuclear Information System (INIS)

    1984-01-01

    This annual report of NIKHEF, Amsterdam (Netherlands) describes experiments carried out at CERN (Geneve), DESY (Hamburg) viz. WA25; CHARM-collaboration; ACCMOR experiments; proton-antiproton collision; LEAR; MARK-J; Crystal Ball experiment; HERA. For the nuclear physics section, experiments are described on electro-excitation of nuclei; pion and muon physics. Theoretical studies are listed concerning electromagnetic interactions in the sigma-omega model and delta-nuclei dynamics. A radiochemical and technical part concludes the report. (Auth.)

  5. Annual Report 2005

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewska, D; Infeld, E; Zupranski, P [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2006-06-15

    The ''Annual Report 2005'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2005. Report consists in general two parts. First consists of general information about location, management, scientific council, personnel financial support and conferences while the second one the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to report written by Director of the Institute prof. Ziemowit Sujkowski is also given.

  6. Annual Report 2007

    Energy Technology Data Exchange (ETDEWEB)

    Chmielewska, D; Infeld, E; Zupranski, P [The Andrzej Soltan Institute for Nuclear Studies, Swierk-Otwock (Poland)

    2008-07-01

    The ''Annual Report 2007'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2007. Report consists of two parts. First one consist of of general information about location, management, scientific council, personnel, financial support and conferences while the second one describes the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to all report written by Director of the Institute prof. Grzegorz Wrochna is also given.

  7. Annual Report 2005

    International Nuclear Information System (INIS)

    Chmielewska, D.; Infeld, E.; Zupranski, P.

    2006-06-01

    The ''Annual Report 2005'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2005. Report consists in general two parts. First consists of general information about location, management, scientific council, personnel financial support and conferences while the second one the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to report written by Director of the Institute prof. Ziemowit Sujkowski is also given

  8. Annual Report 2007

    International Nuclear Information System (INIS)

    Chmielewska, D.; Infeld, E.; Zupranski, P.

    2008-01-01

    The ''Annual Report 2007'' describes activities of Andrzej Soltan Institute for Nuclear Studies in 2007. Report consists of two parts. First one consist of of general information about location, management, scientific council, personnel, financial support and conferences while the second one describes the scientific activity of Institute. This part is divided into subsections which present progress in research of the Institut Departments and Establishments. A Foreword to all report written by Director of the Institute prof. Grzegorz Wrochna is also given

  9. Metallic nanomesh

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Zhifeng; Sun, Tianyi; Guo, Chuanfei

    2018-02-20

    A transparent flexible nanomesh having at least one conductive element and sheet resistance less than 300.OMEGA./.quadrature. when stretched to a strain of 200% in at least one direction. The nanomesh is formed by depositing a sacrificial film, depositing, etching, and oxidizing a first metal layer on the film, etching the sacrificial film, depositing a second metal layer, and removing the first metal layer to form a nanomesh on the substrate.

  10. Areva 2005 annual report

    International Nuclear Information System (INIS)

    2005-01-01

    This annual report contains information on AREVA's objectives, prospects and strategies, particularly in Chapters 4 and 7, as well as contains information on the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the annual report and persons responsible for auditing the financial statements; 2 - Information pertaining to the transaction; 3 - General information on the company and share capital: Information on AREVA, Information on share capital and voting rights, Investment certificate trading, Dividends, Organizational chart of the AREVA group, Equity interests, Shareholders' agreements; 4 - Information on company operations, 5 - New developments and future prospects: Overview and strategy of the AREVA group, The Nuclear Power and Transmission and Distribution markets, AREVA group energy businesses, Front End Division, Reactors and Services Division, Back End Division, Transmission and Distribution Division, Major Contracts, The Group's principal sites, AREVA's customers and suppliers, Human resources, Sustainable Development and Continuous Improvement, Capital spending programs, Research and development, intellectual property and brand name programs, Risk and insurance; 6 - Assets - Financial position - financial performance: Analysis of and comments on the Group's financial position and performance, Human Resources report 2005, Environmental report, Consolidated financial statements, Notes to the consolidated financial statements, AREVA SA Financial statements 2005, Notes to the corporate financial statements; 7 - Corporate governance: Composition and functioning of administrative bodies, Executive compensation, Profit-sharing plans, AREVA Values Charter, Annual General Meeting of Shareholders of May 2, 2006; 8 - Recent developments and outlook: Events subsequent to year-end closing for 2005, Outlook

  11. Uranium industry annual 1994

    International Nuclear Information System (INIS)

    1995-01-01

    The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

  12. Annual Report 2010-2011

    International Development Research Centre (IDRC) Digital Library (Canada)

    ... 2013-2014 Annual Report 2013-2014 Rapport annuel 2013-2014 Annual Report 2014-2015 Annual Report 2014-2015 Rapport annuel 2014-2015 Investing in Solutions Strategic Plan 2015-2020 Investing in Solutions Strategic Plan 2015-2020 Investir dans des solutions Plan stratégique 2015-2020 Financial statements ...

  13. Annual report 1983

    International Nuclear Information System (INIS)

    1983-01-01

    The Institute of Theoretical Physics is a joint institute for research and education serving Chalmers University of Technology and the University of Goeteborg. The five research divisions have the following main activities: Elementary particle physics, Particle dynamics and Field theory. Statistical physics: Electron correlation effects in metals, Spin dynamics, Dynamics of classical liquids and plasmas. Solid state physics: Electronic structure of solids and surfaces, High energy spectroscopy of atoms, surfaces and soils. Surface physics and chemistry: Molecule-metal interaction, heterogeneous catalysis and other surface reactions. Mathematical physics: Wave scattering in inhomogeneous media, Inverse scattering problems. (L.E.)

  14. BAM annual report 1989

    International Nuclear Information System (INIS)

    1990-07-01

    The volume reports on the activities of the Federal Institute of Materials Reseaerch and Testing (BAM) and its departments of metals and metal constructions, building, organic materials, chemical safety technology, special fields of materials testing and techniques which are not dependent on the type of material. Research activities of a more general nature are described, and the work of the project groups for computerized tomography, high-quality ceramics, and the database on hazardous materials (DGG) is described. (orig./MM) With 116 figs., 12 tabs., statistical annex [de

  15. Noble metal abundances in komatiite suites from Alexo, Ontario and Gorgona Island, Colombia

    Science.gov (United States)

    Brügmann, G. E.; Arndt, N. T.; Hofmann, A. W.; Tobschall, H. J.

    1987-08-01

    The distribution of the chalcophile and siderophile metals Cu, Ni, Au, Pd, Ir, Os and Ru in an Archaean komatiite flow from Alexo, Ontario and in a Phanerozoic komatiitic suite of Gorgona Island, Colombia, provides new information about the geochemical behaviour of these elements. Copper, Au and Pd behave as incompatible elements during the crystallization of these ultramafic magmas. In contrast, Ni, Ir, Os and Ru concentrations systematically decrease with decreasing MgO contents, a pattern characteristic of compatible elements. These trends are most probably controlled by olivine crystallization, which implies that Ir, Os and Ru are compatible in olivine. Calculated partition coefficients for Ir, Os and Ru between olivine and the melt are about 1.8. Compared to primitive mantle, parental komatiitic liquids are enriched in (incompatible) Cu, Au and Pd and depleted in (compatible) Ir, Os and Ru. Within both Archaean and Phanerozoic komatiites, noble metal ratios such as Au/Pd, Ir/Os, Os/Ru and Ru/Ir and ratios of lithophile and siderophile elements such as Ti/Pd, Ti/Au are constant and similar to primitive mantle values. This implies that Au and Pd are moderately incompatible elements and that there has been no significant fractionation of siderophile and lithophile elements since the Archaean. Platinum-group element abundances of normal MORB are highly variable and always much lower than in komatiites, because MORB magma is saturated with sulfur and a variable but minor amount of sulfide segregated during mantle melting or during the ascent of magma to the surface. Sulfide deposits associated with komatiites display similar chalcophile element patterns to those of komatiites. Noble metal ratios such as Pd/Ir, Au/Ir, Pd/Os and Pd/Ru can be used to determine the composition of the host komatiite at the time of sulfide segregation.

  16. Risoe annual report 1980

    International Nuclear Information System (INIS)

    1981-09-01

    Brief notes on several activities of Risoe National Laboratory are given: uranium extraction from Kvanefjeld in Greenland, better utilization of uranium as fuel, hydrogen in metals, wind power, lasers, radioactive medicaments, plasma, plant breeding. Furthermore a summary is presented of current projects at Risoe, and a list of selected publications is given. (LN)

  17. Annual report 1981

    International Nuclear Information System (INIS)

    1982-01-01

    The research activities during 1981 are described. Project were going on in the following fields: Theoretical nuclear physics; particle physics; field theory and mathematical physics; theoretical biophysics; and theory of metals. A short abstract is given for each project. (G.B.)

  18. A model for osmium isotopic evolution of metallic solids at the core-mantle boundary

    Science.gov (United States)

    Humayun, Munir

    2011-03-01

    Some plumes are thought to originate at the core-mantle boundary, but geochemical evidence of core-mantle interaction is limited to Os isotopes in samples from Hawaii, Gorgona (89 Ma), and Kostomuksha (2.7 Ga). The Os isotopes have been explained by physical entrainment of Earth's liquid outer core into mantle plumes. This model has come into conflict with geophysical estimates of the timing of core formation, high-pressure experimental determinations of the solid metal-liquid metal partition coefficients (D), and the absence of expected 182W anomalies. A new model is proposed where metallic liquid from the outer core is partially trapped in a compacting cumulate pile of Fe-rich nonmetallic precipitates (FeO, FeS, Fe3Si, etc.) at the top of the core and undergoes fractional crystallization precipitating solid metal grains, followed by expulsion of the residual metallic liquid back to the outer core. The Os isotopic composition of the solids and liquids in the cumulate pile is modeled as a function of the residual liquid remaining and the emplacement age using 1 bar D values, with variable amounts of oxygen (0-10 wt %) as the light element. The precipitated solids evolve Os isotope compositions that match the trends for Hawaii (at an emplacement age of 3.5-4.5 Ga; 5%-10% oxygen) and Gorgona (emplacement age < 1.5 Ga; 0%-5% oxygen). The Fe-rich matrix of the cumulate pile dilutes the precipitated solid metal decoupling the Fe/Mn ratio from Os and W isotopes. The advantages to using precipitated solid metal as the Os host include a lower platinum group element and Ni content to the mantle source region relative to excess iron, miniscule anomalies in 182W (<0.1 ɛ), and no effects for Pb isotopes, etc. A gradual thermomechanical erosion of the cumulate pile results in incorporation of this material into the base of the mantle, where mantle plumes subsequently entrain it. Fractional crystallization of metallic liquids within the CMB provides a consistent explanation of

  19. The SRTR/OPTN Annual Data Report

    Science.gov (United States)

    ... Annual Data Report The SRTR/OPTN Annual Data Report Statistics on donation and transplantation in the United ... US in 2015. The SRTR/OPTN Annual Data Report SRTR/OPTN Annual Data Report Learn more from ...

  20. Plasma metallization

    International Nuclear Information System (INIS)

    Crowther, J.M.

    1997-09-01

    Many methods are currently used for the production of thin metal films. However, all of these have drawbacks associated with them, for example the need for UHV conditions, high temperatures, exotic metal precursors, or the inability to coat complex shaped objects. Reduction of supported metal salts by non-isothermal plasma treatment does not suffer from these drawbacks. In order to produce and analyse metal films before they become contaminated, a plasma chamber which could be attached directly to a UHV chamber with XPS capability was designed and built. This allowed plasma treatment of supported metal salts and surface analysis by XPS to be performed without exposure of the metal film to the atmosphere. Non-equilibrium plasma treatment of Nylon 66 supported gold(lll) chloride using hydrogen as the feed gas resulted in a 95% pure gold film, the remaining 5% of the film being carbon. If argon or helium were used as the feed gases during plasma treatment the resultant gold films were 100% pure. Some degree of surface contamination of the films due to plasma treatment was observed but was easily removed by argon ion cleaning. Hydrogen plasma reduction of glass supported silver(l) nitrate and palladium(ll) acetate films reveals that this metallization technique is applicable to a wide variety of metal salts and supports, and has also shown the ability of plasma reduction to retain the complex 'fern-like' structures seen for spin coated silver(l) nitrate layers. Some metal salts are susceptible to decomposition by X-rays. The reduction of Nylon 66 supported gold(lll) chloride films by soft X-rays to produce nanoscopic gold particles has been studied. The spontaneous reduction of these X-ray irradiated support gold(lll) chloride films on exposure to the atmosphere to produce gold rich metallic films has also been reported. (author)

  1. 2000 Annual report

    International Nuclear Information System (INIS)

    2001-01-01

    This annual report presents information of the main activities on the scope of radiation protection and nuclear safety of the Nuclear Regulatory Authority (NRA) of the Argentina during 2000. The following activities and developed topic in this report describe: the Argentine regulatory system; the evolution of the nuclear regulatory activities in the Argentina since the beginnings in the National Atomic Energy Commission (NAEC) of Argentina; the nuclear regulatory laws and standards; the safeguards and inspection of the nuclear facilities and nuclear power plants; the radiological emergency systems; the environmental monitoring; the institutional relations with national and international organizations; the biological and physics dosimetry; the training courses and meetings; the economic and human recourses

  2. Annual Report 2006

    Energy Technology Data Exchange (ETDEWEB)

    Michalik, J; Smulek, W; Godlewska-Para, E [eds.

    2007-07-01

    The Annual Report of the Institute of Nuclear Chemistry and Technology (Warsaw, Poland) describes achievements of the Institute in 2006 obtained in seven fields: (1) radiation chemistry and technology, (2) radiochemistry and coordination chemistry, (3) radiobiology, (4) application of nuclear methods in material and process engineering, (5) design of instruments based on nuclear techniques, (6) trace analysis and radioanalytical techniques, (7) environmental research. In total - 83 detailed papers prepared by the Institute workers and collaborating scientists are presented. General information on the Institute status, personnel activity, international cooperation and publications are presented.

  3. 1977 Annual Typhoon Report

    Science.gov (United States)

    1995-01-01

    George T. McKaige, USN *CAPT Frederick P. Milwer, USAF CAPT Alan W. Hassebrock, USAF CAPT Charles P. Guard , USAF CAPT”John D. Shewchuk, USAF ENS Edward...Det 1, lWW - USAF 1977 ANNUAL TYPHOON REPORT *Departed during 1977 season FRONTCOVER: ln&a.tedphoztogzaphof a - tmJ -A.toZmb.iaZatAn o.ulh a M dtig -&A...ships provide day and night coverage in the JTWC area of responsibility. Interpretation of this satellite imagery pro- vides cyclone positions, and for

  4. Uranium industry annual, 1986

    International Nuclear Information System (INIS)

    1987-01-01

    Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

  5. NIRE annual report 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The National Institute for Resources and Environment (NIRE) has a R & D concept of `ecotechnology` that aims to protect the environment from degradation whilst promoting sustainable development. This annual report presents summaries of 32 recent research efforts on such topics as: emission control of sulfur and nitrogen oxides from advanced coal combustors; catalysts for diesel NO{sub x} removal; measuring dust from stationary sources; software for life cycle assessment; marine disposal of CO{sub 2}; emissions of greenhouse gases from coal mines in Japan; structural changes in coal particles during gasification; solubilization and desulfurization of high sulfur coal with trifluoromethane sulfuroic acid; and oxidation mechanisms of H{sub 2}S.

  6. Annual report 1975

    International Nuclear Information System (INIS)

    1976-02-01

    The annual report of the PTB for 1975 deals in part 1 with organization and activities of the executive committee and the administration, in the second part with work carried out by the departments mechanics, electric power, heat, optics, acoustics, nuclear physics, reactor radiation, general technical-scientific services, and the institute in Berlin. The second part deals with examinations, authorizations, permits, cooperation, advisory activities and scientific services. Part three presents R and D activities carried out in the nine departments in the form of scientific summaries. (HK) [de

  7. Annual report 1980

    International Nuclear Information System (INIS)

    1981-01-01

    This annual report contains extended abstracts about the research done at the named institute. These abstracts concern the development of accelerators and ion sources, the construction of the magnetic spectrograph and radiation detectors, the investigation of solids and microstructures by nuclear methods, the development of electronic circuits, the advances in data processing, the study of heavy ion reactions, nuclear structure, and reaction mechanisms, the research on atomic physics and the interaction of charged particles with matter, the studies in medium and high energy physics, the theoretical studies of nuclear structure, and the research in cosmochemistry. Furthermore a list of publications is added. (orig./HSI) [de

  8. Annual report 1982

    International Nuclear Information System (INIS)

    This annual report describes the work during 1982 of the Nuclear Physics Institute of Lyon. The achievement of SARA postaccelerator in Grenoble, realized in collaboration with the Nuclear Science Institute, permits to pursue new lines of research in heavy ion physics. A new isotope separator was realized by the nuclear spectroscopy group and the high energy experimental group cooperates with the LAPP to build in international collaboration the L3 detector for LEP. The topics covered include theoretical physics, high energy and intermediate energy physics, nuclear physics and interdisciplinary physics, such as solid state physics and neutronics [fr

  9. CEA Annual report 2007

    International Nuclear Information System (INIS)

    2007-01-01

    The CEA, a prominent player in research development and innovation, is active in three main domains: energy, health care and information technology, defense and security. This annual report presents the CEA activities for the year 2007 in these three main areas: science and technology working for nuclear deterrence and global security, the energies without greenhouse effect gases emission against the climatic change, researches in the information sciences and technologies for a better communication and health. The CEA safety, organization, communication and international relations are also presented. (A.L.B.)

  10. 1996 annual report

    International Nuclear Information System (INIS)

    1996-01-01

    This 1996 issue of the annual report of the French Commissariat a l'Energie Atomique (CEA) gives a general overview of CEA organization, activities, human resources, international relations and external communication with some budgetary informations. The main activities described concern the national defence, the fuel cycle, the nuclear reactors, the condensed matter and life sciences, the advanced technologies, the protection and transfer of knowledge and technologies, the environmental activities, the management and processing of nuclear wastes, the nuclear protection and safety, the technical and scientific information, the teaching and training, the scientific prizes, the committees, councils and commissions. (J.S.)

  11. Petroleum marketing annual, 1990

    International Nuclear Information System (INIS)

    1991-01-01

    The Petroleum Marketing Annual contains statistical data on a variety of crude oils and refined petroleum products. The publication provides statistics on crude oil costs and refined petroleum products sales for use by industry, government, private sector analysts, educational institutions, and consumers. Data on crude oil include the domestic first purchase price, the free-on-board and landed cost of imported crude oil, and the refiners' acquisition cost of crude oil. Sales data for motor gasoline, distillates, residuals, aviation fuels, kerosene, and propane are presented. (VC)

  12. Renewable energy annual 1996

    International Nuclear Information System (INIS)

    1997-03-01

    This report presents summary data on renewable energy consumption, the status of each of the primary renewable technologies, a profile of each of the associated industries, an analysis of topical issues related to renewable energy, and information on renewable energy projects worldwide. It is the second in a series of annual reports on renewable energy. The renewable energy resources included in the report are biomass (wood and ethanol); municipal solid waste, including waste-to-energy and landfill gas; geothermal; wind; and solar energy, including solar thermal and photovoltaic. The report also includes various appendices and a glossary

  13. Annual report 1991

    International Nuclear Information System (INIS)

    1991-01-01

    In 1991, the Corporation undertook an examination of its future direction, having completed the divestment mandate assigned to it in 1986. This examination resulted in a reorientation of the Corporation's objectives toward enhancing participation in the energy sector by the Aboriginal Peoples and northern communities of the province. The Corporation's cash assets increased to $33 million in 1991, largely attributable to a Suncor dividend of $14.2 million. The financial statements have been prepared by management in accordance with generally accepted accounting principles. Management is also responsible for the other information in the annual report, which is consistent with that contained in the financial statements

  14. Annual report 1975

    International Nuclear Information System (INIS)

    1976-01-01

    A survey is presented of: a) Research activities carried out during 1975 within the framework of the scientific sections of the Institute, b) the central technical seπtions and their services, and c) the organizational structure. Enclosed are: 1) Report on the activities of the administrative management, the administration, and general services, 2) a list of all publications and conference reports issued by IPP Garching during 1975, and an annual report by the Institut fuer Plasmaphysik of the University of Stuttgart, an institute financed by IPP Garching. (GG) [de

  15. International energy annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    The International Energy Annual presents information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Production and consumption data are reported in standard units as well as British thermal units (Btu). Trade and reserves are shown for petroleum, natural gas, and coal. Data are provided on crude oil refining capacity and electricity installed capacity by type. Prices are included for selected crude oils and for refined petroleum products in selected countries. Population and Gross Domestic Product data are also provided.

  16. Institute annual report 2004

    International Nuclear Information System (INIS)

    2005-01-01

    The mission of the ITU (Institute for Transuranium Elements) is to protect the European citizen against risk associated with the handling and storage of highly radioactive elements. The JRC (Joint Research Center) provide customer-driven scientific and technical support for the conception, development, implementation and monitoring of EU policies. In this framework this annual report presents the TU actions in: basic actinide research, spent fuel characterization, safety of nuclear fuels, partitioning and transmutation, alpha-immunotherapy/radiobiology, measurement of radioactivity in the environment, safeguards research and development. (A.L.B.)

  17. International energy annual 1995

    International Nuclear Information System (INIS)

    1996-12-01

    The International Energy Annual presents information and trends on world energy production and consumption for petroleum, natural gas, coal, and electricity. Production and consumption data are reported in standard units as well as British thermal units (Btu). Trade and reserves are shown for petroleum, natural gas, and coal. Data are provided on crude oil refining capacity and electricity installed capacity by type. Prices are included for selected crude oils and for refined petroleum products in selected countries. Population and Gross Domestic Product data are also provided

  18. Annual Report 1981

    International Nuclear Information System (INIS)

    1982-01-01

    This Annual Report covers the activities at the Kernfysisch Versneller Instituut (KVI) during the year 1981. It contains 74 short reports grouped under the headings: inelastic scattering studies, transfer and charge-exchange reactions, breakup reactions and fission studies, heavy-ion reactions, gamma, electron and X-ray spectroscopy, hyperfine interactions and nuclear orientation, weak interactions, IBA related studies, other theoretical studies, cyclotron and beam lines, data acquisition and data analysis, instrumentation and electronics and medical physics. Details are also presented of the personnel, scientific publications, internal reports, and attended and internal conferences and seminars. (C.F.)

  19. NPL 1999 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-01-01

    OAK-B135 NPL 1999 Annual Report. The Nuclear Physics Laboratory at the University of Washington in Seattle pursues a broad program of nuclear physics research. Research activities are conducted locally and at remote sites. The current program includes ''in-house'' research on nuclear collisions using the local tandem Van de Graaff and superconducting linac accelerators as well as local and remote non-accelerator research on fundamental symmetries and weak interactions and user-mode research on relativistic heavy ions at large accelerator facilities around the world.

  20. 1997 annual report

    International Nuclear Information System (INIS)

    1997-01-01

    This 1997 issue of the annual report of the French Commissariat a l'Energie Atomique (CEA) gives a general overview of the CEA organization, activities, human resources, international relations and communication with some budgetary information. The main activities described concern the national defence, the fuel cycle, the nuclear reactors, the nuclear protection and safety, the advanced technologies, the quasi-particles, the effects of ionizing radiations on humans, the medical imagery, the transfer of technology, the protection and valorization of knowledge, the radioactive wastes and spent fuels management, the training and teaching, the scientific prizes, the committees, councils and commissions. (O.M.)