WorldWideScience

Sample records for platinum gasaver device

  1. Efficient organic light-emitting devices with platinum-complex emissive layer

    KAUST Repository

    Yang, Xiaohui

    2011-01-18

    We report efficient organic light-emitting devices having a platinum-complex emissive layer with the peak external quantum efficiency of 17.5% and power efficiency of 45 lm W−1. Variation in the device performance with platinum-complex layer thickness can be attributed to the interplay between carrier recombination and intermolecular interactions in the layer. Efficient white devices using double platinum-complex layers show the external quantum efficiency of 10%, the Commission Internationale d’Énclairage coordinates of (0.42, 0.41), and color rendering index of 84 at 1000 cd m−2.

  2. Efficient light-emitting devices based on platinum-complexes-anchored polyhedral oligomeric silsesquioxane materials

    KAUST Repository

    Yang, Xiaohui

    2010-08-24

    The synthesis, photophysical, and electrochemical characterization of macromolecules, consisting of an emissive platinum complex and carbazole moieties covalently attached to a polyhedral oligomeric silsesquioxane (POSS) core, is reported. Organic light-emitting devices based on these POSS materials exhibit a peak external quantum efficiency of ca. 8%, which is significantly higher than that of the analogous devices with a physical blend of the platinum complexes and a polymer matrix, and they represent noticeable improvement in the device efficiency of solution-processable phosphorescent excimer devices. Furthermore, the ratio of monomer and excimer/aggregate electroluminescent emission intensity, as well as the device efficiency, increases as the platinum complex moiety presence on the POSS macromolecules decreases. © 2010 American Chemical Society.

  3. Characterization of Deposited Platinum Contacts onto Discrete Graphene Flakes for Electrical Devices

    KAUST Repository

    Holguin Lerma, Jorge A.

    2016-05-03

    For years, electron beam induced deposition has been used to fabricate electrical contacts for micro and nanostructures. The role of the contact resistance is key to achieve high performance and efficiency in electrical devices. The present thesis reports on the electrical, structural and chemical characterization of electron beam deposited platinum electrodes that are exposed to different steps of thermal annealing and how they are used in four-probe devices of ultrathin graphite (uG) flakes (<100nm thickness). The device integration of liquid phase exfoliated uG is demonstrated, and its performance compared to devices made with analogous mechanically exfoliated uG. For both devices, similar contact resistances of ~2kΩ were obtained. The electrical measurements confirm a 99.5% reduction in contact resistance after vacuum thermal annealing at 300 °C. Parallel to this, Raman characterization confirms the formation of a nanocrystalline carbon structure over the electrode. While this could suggest an enhancement of the electrical transport in the device, an additional thermal annealing step in air at 300 °C, promoted the oxidation and removal of the carbon shell and confirmed that the contact resistance remained the same. Overall this shows that the carbon shell along the electrode has no significant role in the contact resistance. Finally, the challenges based on topographical analysis of the deposited electrodes are discussed. Reduction of the electrode’s height down to one-third of the initial value, increased surface roughness, formation of voids along the electrodes and the onset of platinum nanoparticles near the area of deposition, represent a challenge for future work.

  4. Fabrication of Nano-Crossbar Resistive Switching Memory Based on the Copper-Tantalum Pentoxide-Platinum Device Structure

    Science.gov (United States)

    Olga Gneri, Paula; Jardim, Marcos

    Resistive switching memory has been of interest lately not only for its simple metal-insulator-metal (MIM) structure but also for its promising ease of scalability an integration into current CMOS technologies like the Field Programmable Gate Arrays and other non-volatile memory applications. There are several resistive switching MIM combinations but under this scope of research, attention will be paid to the bipolar resistive switching characteristics and fabrication of Tantalum Pentaoxide sandwiched between platinum and copper. By changing the polarity of the voltage bias, this metal-insulator-metal (MIM) device can be switched between a high resistive state (OFF) and low resistive state (ON). The change in states is induced by an electrochemical metallization process, which causes a formation or dissolution of Cu metal filamentary paths in the Tantalum Pentaoxide insulator. There is very little thorough experimental information about the Cu-Ta 2O5-Pt switching characteristics when scaled to nanometer dimensions. In this light, the MIM structure was fabricated in a two-dimensional crossbar format. Also, with the limited available resources, a multi-spacer technique was formulated to localize the active device area in this MIM configuration to less than 20nm. This step is important in understanding the switching characteristics and reliability of this structure when scaled to nanometer dimensions.

  5. Platinum nanoparticle-facilitated reflective surfaces for non-contact temperature control in microfluidic devices for PCR amplification.

    Science.gov (United States)

    Leslie, Daniel C; Seker, Erkin; Bazydlo, Lindsay A L; Strachan, Briony C; Landers, James P

    2012-01-07

    The polymerase chain reaction (PCR) is critical for amplification of target sequences of DNA or RNA that have clinical, biological or forensic relevance. While extrinsic Fabry-Perot interferometry (EFPI) has been shown to be adequate for non-contact temperature sensing, the difficulty in defining a reflective surface that is semi-reflective, non-reactive for PCR compatibility and adherent for thermal bonding has limited its exploitation. Through the incorporation of a reflective surface fabricated using a thermally driven self-assembly of a platinum nanoparticle monolayer on the surface of the microfluidic chamber, an enhanced EFPI signal results, allowing for non-contact microfluidic temperature control instrumentation that uses infrared-mediated heating, convective forced-air cooling, and interferometic temperature sensing. The interferometer is originally calibrated with a miniature copper-constantan thermocouple in the PCR chamber resulting in temperature sensitivities of -22.0 to -32.8 nm·°C(-1), depending on the chamber depth. This universal calibration enables accurate temperature control in any device with arbitrary dimensions, thereby allowing versatility in various applications. Uniquely, this non-contact temperature control for PCR thermocycling is applied to the amplification of STR loci for human genetic profiling, where nine STR loci are successfully amplified for human identification using the EFPI-based non-contact thermocycling.

  6. Nanotemplated platinum fuel cell catalysts and copper-tin lithium battery anode materials for microenergy devices

    OpenAIRE

    Rohan, James F.; Hasan, Maksudul; Holubowitch, Nicolas E.

    2011-01-01

    Nanotemplated materials have significant potential for applications in energy conversion and storage devices due to their unique physical properties. Nanostructured materials provide additional electrode surface area beneficial for energy conversion or storage applications with short path lengths for electronic and ionic transport and thus the possibility of higher reaction rates. We report on the use of controlled growth of metal and alloy electrodeposited templated nanostructures for energy...

  7. Probing Interaction Between Platinum Group Metal (PGM) and Non-PGM Support Through Surface Characterization and Device Performance

    Science.gov (United States)

    Saha, Shibely

    High cost and limited abundance of Platinum (Pt) have hindered effective commercialization of Proton Exchange Membrane Fuel Cell and Electrolyzer. Efforts have been undertaken to reduce precious group metal (PGM) requirement for these devices without compromising the activity of the catalyst by using transition metal carbides (TMC) as non-PGM support thanks to their similar electronic and geometric structures as Pt. In this work Mo2C was selected as non-PGM support and Pt was used as the PGM of interest. We hypothesize that the hollow nanotube morphology of Mo2C support combined with Pt nano particles deposited on it via atomic layer deposition (ALD) technique would allow increased interaction between them which may increase the activity of Pt and Mo2C as well as maximize the Pt active surface area. Specifically, a rotary ALD equipment was used to grow Pt particles from atomic level to 2--3 nanometers by simply adjusting number of ALD cycles in order to probe the interaction between the deposited Pt nanoparticles and Mo2C nanotube support. Interaction between the Pt and Mo2 C was analyzed via surface characterization and electrochemical characterization. Interaction between Pt and Mo2C arises due to the lattice mismatch between Pt and Mo2C as well as electron migration between them. Lattice spacing analysis using high resolution transmission electron microscopy (HRTEM) images, combined with Pt binding energy shift in XPS results, clearly showed strong bonding between Pt nanoparticles and the Mo2C nanotube support in all the resultant Pt/Mo2C samples. We postulate that this strong interaction is responsible for the significantly enhanced durability observed in our constant potential electrolysis (CPE) and accelerated degradation testing (ADT). Of the three samples from different ALD cycles (15, 50 and 100), Mo2C nanotubes modified by 50 (1.07 wt% Pt loading) and 100 cycles (4.4 wt% Pt) of Pt deposition, showed higher HER and HOR activity per Pt mass than commercial

  8. Coatings of Different Carbon Nanotubes on Platinum Electrodes for Neuronal Devices: Preparation, Cytocompatibility and Interaction with Spiral Ganglion Cells.

    Directory of Open Access Journals (Sweden)

    Niklas Burblies

    Full Text Available Cochlear and deep brain implants are prominent examples for neuronal prostheses with clinical relevance. Current research focuses on the improvement of the long-term functionality and the size reduction of neural interface electrodes. A promising approach is the application of carbon nanotubes (CNTs, either as pure electrodes but especially as coating material for electrodes. The interaction of CNTs with neuronal cells has shown promising results in various studies, but these appear to depend on the specific type of neurons as well as on the kind of nanotubes. To evaluate a potential application of carbon nanotube coatings for cochlear electrodes, it is necessary to investigate the cytocompatibility of carbon nanotube coatings on platinum for the specific type of neuron in the inner ear, namely spiral ganglion neurons. In this study we have combined the chemical processing of as-delivered CNTs, the fabrication of coatings on platinum, and the characterization of the electrical properties of the coatings as well as a general cytocompatibility testing and the first cell culture investigations of CNTs with spiral ganglion neurons. By applying a modification process to three different as-received CNTs via a reflux treatment with nitric acid, long-term stable aqueous CNT dispersions free of dispersing agents were obtained. These were used to coat platinum substrates by an automated spray-coating process. These coatings enhance the electrical properties of platinum electrodes, decreasing the impedance values and raising the capacitances. Cell culture investigations of the different CNT coatings on platinum with NIH3T3 fibroblasts attest an overall good cytocompatibility of these coatings. For spiral ganglion neurons, this can also be observed but a desired positive effect of the CNTs on the neurons is absent. Furthermore, we found that the well-established DAPI staining assay does not function on the coatings prepared from single-wall nanotubes.

  9. Platinum impact assessment

    OpenAIRE

    Yip, Joyce Pui Yan

    2007-01-01

    This paper presents a comprehensive strategic analysis of Company X's strategies to mitigate its risks from volatile platinum prices, since Platinum is a critical component of fuel cells. It is recommended that Company X consider leasing platinum to lower cash flow requirements to meet its platinum demand over the next 5 years. A shorter platinum leasing period will reduce Company X's platinum market risk. OEMs can set up metal accounts with catalyst suppliers to eliminate Company X from plat...

  10. PLATINUM AND FUEL CELLS

    Science.gov (United States)

    Platinum requirements for fuel cell vehicles (FCVS) have been identified as a concern and possible problem with FCV market penetration. Platinum is a necessary component of the electrodes of fuel cell engines that power the vehicles. The platinum is deposited on porous electrodes...

  11. Exhaust system having a gold-platinum group metal catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Ragle, Christie Susan [Havana, IL; Silver, Ronald G [Peoria, IL; Zemskova, Svetlana Mikhailovna [Edelstein, IL; Eckstein, Colleen J [Metamora, IL

    2011-12-06

    A method of providing an exhaust treatment device is disclosed. The method includes applying a catalyst including gold and a platinum group metal to a particulate filter. The concentration of the gold and the platinum group metal is sufficient to enable oxidation of carbon monoxide and nitric oxide.

  12. Behind platinum's sparkle.

    Science.gov (United States)

    Yam, Vivian W W

    2010-09-01

    As a rare and precious metal that is also resistant to wear and tarnish, platinum is known to be particularly well-suited to jewellery. Vivian Yam reflects on how, beyond its prestigious image, platinum has also found its way into a variety of fields ranging from the petrochemical to the pharmaceutical industry.

  13. Platinum hypersensitivity and desensitization.

    Science.gov (United States)

    Miyamoto, Shingo; Okada, Rika; Ando, Kazumichi

    2015-09-01

    Platinum agents are drugs used for various types of cancer. With increased frequency of administration of platinum agents, hypersensitivity reactions appear more frequently, occurring in over 25% of cases from the seventh cycle or second line onward. It then becomes difficult to conduct treatment using these agents. Various approaches have been investigated to address hypersensitivity reactions to platinum agents. Desensitization, which gradually increases the concentration of the anticancer drug considered to be the antigen until the target dosage, has been reported as being particularly effective, with a success rate of 80-100%. The aims of this paper are to present the current findings regarding hypersensitivity reactions to platinum agents and to discuss attempts of using desensitization against hypersensitivity reactions worldwide. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  14. Heterogeneous platinum-catalyzed hydrogenation of dialkyl(diolefin)platinum(II) complexes: A new route to platinum surface alkyls

    OpenAIRE

    McCarthy, Thomas J.; Shih, Yen-Shiang; Whitesides, George M.

    1981-01-01

    Platinum metal catalyzes the reduction of dialkyl(diolefin)platinum(II) complexes by dihydrogen to alkanes and platinum(0). The reaction involves adsorption of the platinum(II) complex on the platinum(0) catalyst surface with conversion of the alkyl moieties to platinum surface alkyls; these appear as alkane products. The platinum atom originally present in the soluble organoplatinum species becomes part of the platinum(0) surface.

  15. Green-Yellow Electrophosphorescence from di [2,5-diphenyl-1,3,4-oxadiazole C2',N3] Platinum(Ⅱ) Doped PVK Devices

    Institute of Scientific and Technical Information of China (English)

    LIU Jian; ZHU Mei-Xiang; JIANG Chang-Yun; LIU Yu; WU Zhong-Lian; LI Jian-Ren; XING Kong-Qiang; CAO Yong; ZHU Wei-Guo

    2005-01-01

    @@ Employing a blend of poly (N-vinylcarbazole) (PVK) and 5-biphenyl-2-(4-tert-butyl)phenyl-1,3,4-oxadiazole)(PBD) as host matrix and a novel bicyclometalated Pt-complex containing 1,3,4-oxadiazole moiety as guest matrix with 2 wt. % doping concentration, we have demonstrated efficient phosphorescence-based polymer light-emitting devices (PLEDs).

  16. Solid-state charge-based device for control of catalytic carbon monoxide oxidation on platinum nanofilms using external bias and light.

    Science.gov (United States)

    Baker, L Robert; Hervier, Antoine; Kennedy, Griffin; Somorjai, Gabor A

    2012-05-09

    Using a Pt/Si catalytic nanodiode, we externally control the rate of CO oxidation on a Pt nanofilm. The catalytic reaction can be turned on and off by alternating between bias states of the device. Additionally, the reaction rate is sensitive to photocurrent induced by visible light. The effects of both bias and light show that negative charge on the Pt increases catalytic activity, while positive charge on the Pt decreases catalytic activity for CO oxidation.

  17. Toxicity of platinum compounds.

    Science.gov (United States)

    Hartmann, Jörg Thomas; Lipp, Hans-Peter

    2003-06-01

    Since the introduction of platinum-based combination chemotherapy, particularly cisplatin, the outcome of the treatment of many solid tumours has changed. The leading platinum compounds in cancer chemotherapy are cisplatin, carboplatin and oxaliplatin. They share some structural similarities; however, there are marked differences between them in therapeutic use, pharmacokinetics and adverse effects profiles [1-4]. Compared to cisplatin, carboplatin has inferior efficacy in germ-cell tumour, head and neck cancer and bladder and oesophageal carcinoma, whereas both drugs seem to have comparable efficacy in advanced non-small cell and small cell lung cancer as well as ovarian cancer [5-7]. Oxaliplatin belongs to the group of diaminocyclohexane platinum compounds. It is the first platinum-based drug that has marked efficacy in colorectal cancer when given in combination with 5-fluorouracil and folinic acid [8,9]. Other platinum compounds such as oral JM216, ZD0473, BBR3464 and SPI-77, which is a pegylated liposomal formulation of cisplatin, are still under investigation [10-13], whereas nedaplatin has been approved in Japan for the treatment of non-small cell lung cancer and other solid tumours. This review focuses on cisplatin, carboplatin and oxaliplatin.

  18. Oxygen Reduction on Platinum

    DEFF Research Database (Denmark)

    Nesselberger, Markus

    This thesis investigates the electro reduction of oxygen on platinum nanoparticles, which serve as catalyst in low temperature fuel cells. Kinetic studies on model catalysts as well as commercially used systems are presented in order to investigate the particle size effect, the particle proximity...... carbon (HSAC) supported Pt nanoparticle (Pt/C) catalysts (of various size between 1 and 5 nm). The difference in SA between the individual Pt/C catalysts (1 to 5 nm) is very small and within the error of the measurements. The factor four of loss in SA when comparing platinum bulk and Pt/C can largely...

  19. Biomineralization of platinum by microorganisms

    Science.gov (United States)

    Pavlova, L. M.; Radomskaya, V. I.; Shumilova, L. P.; Ionov, A. M.; Sorokin, P.

    2017-04-01

    The mechanism of platinum biomineralization by microscopic fungi is displayed based on data of electron microscopy, infrared and X-ray photoelectronic spectroscopy. It was suggested the platinum sorption process by microscopic fungi has some stages. The initial interaction is carried out by the mechanisms of physical and chemical sorption. Hereafter the reduction process of adsorbed platinum ions up to zero state is performed, probably, for account of organic compounds, which are produced by fungi biomass as metabolism result, and the process terminates by nulvalent particles aggregating up to nanosize forms. Obtained data on the platinum biomineralization extends the concept concerning the character of forming platinum nanoparticles in carbonous paleobasin.

  20. Platinum metals in the environment

    Energy Technology Data Exchange (ETDEWEB)

    Zereini, Fathi [Frankfurt Univ. (Germany). Dept. of Environmental Analytical Chemistry; Wiseman, Clare L.S. (ed.) [Toronto Univ. (Canada). School of the Environment

    2015-03-01

    This book contains the five chapters with the following topics: 1. SOURCES OF PGE EMISSIONS ELEMENTS: Sources of Platinum Group Elements (PGE) in the Environment; Impact of Platinum Group Element Emissions from Mining and Production Activities. 2. ANALYTICAL METHODS FOR THE DETERMINATION OF PGE IN BIOLOGICAL AND ENVIRONMENTAL MATRICES: Appraisal of Biosorption for Recovery, Separation and Determination of Platinum, Palladium and Rhodium in Environmental Samples; On the Underestimated Factors Influencing the Accuracy of Determination of Pt and Pd by Electrothermal Atomic Absorption Spectrometry in Road Dust Samples; Application of Solid Sorbents for Enrichment and Separation of Platinum Metal Ions; Voltammetric Analysis of Platinum in Environmental Matrices; Speciation Analysis of Chloroplatinates; Analysis of Platinum Group Elements in Environmental Samples: A Review. 3. OCCURRENCE, CHEMICAL BEHAVIOR AND FATE OF PGE IN THE ENVIRONMENT: Brazilian PGE Research Data Survey on Urban and Roadside Soils; Platinum, Palladium and Rhodium in a Bavarian Roadside Soil; Increase of Platinum Group Element Concentrations in Soils and Airborne Dust During the Period of Vehicular Exhaust Catalysts Introduction; Platinum-Group Elements in Urban Fluvial Bed Sediments-Hawaii; Long-Term Monitoring of Palladium and Platinum Contents in Road Dust of the City of Munich, Germany; Characterization of PGEs and Other Elements in Road Dusts and Airborne Particles in Houston, Texas; Accumulation and Distribution of Pt and Pd in Roadside Dust, Soil and Vegetation in Bulgaria; Increase of the Environmental Pt Concentration in the Metropolitan Area of Mexico City Associated to the Use of Automobile Catalytic Converters; Solubility of Emitted Platinum Group Elements (Pt, Pd and Rh) in Airborne Particulate Matter (PM10) in the Presence of Organic Complexing Agents; The Influence of Anionic Species (Cl{sup -}, NO{sub 3}{sup -}, SO{sub 4}{sup 2-}) on the Transformation and Solubility of Platinum in

  1. Platinum contamination issues in ferroelectric memories

    Science.gov (United States)

    Boubekeur, H.; Mikolajick, T.; Pamler, W.; Hopfner, J.; Frey, L.; Ryssel, H.

    2002-09-01

    The contamination risk of processing with platinum electrodes on device performance in ferroelectric memories is assessed in this work. Details of platinum diffusion to the active regions at annealing temperatures of 800 degC are investigated by secondary ion mass spectroscopy, deep level transient spectroscopy, and Rutherford backscattering spectrometry techniques. Cross sectional transmission electron microscopy and local elemental analysis by energy dispersive x-ray spectroscopy were used to examine the precipitation of Pt in defect free silicon as an eventual cause of gate oxide degradation. The impact of platinum contamination on device performance is evaluated under the typical ferroelectric memory processing conditions. Results from leakage current and charge to breakdown measurements of intentionally contaminated diode and metal-oxide-semiconductor (MOS) structures, respectively, are presented. The results show that the degradation depends strongly on device design and configuration. A phosphorus doped polysilicon plug, which has the function of connecting the select transistor to the capacitor module, provides effective gettering regions and prevents the diffusion of Pt atoms to the active regions. Under typical processing conditions, no evident Pt precipitates were observed and up to a concentration level of 4 x1014 atoms/cm2, the leakage current of intentionally contaminated diodes does not increase, if the contamination occurs after front-end phosphorus doped poly-Si processing. Results from constant current charge to breakdown show a small number of breakdown events due to redeposition of Pt at the periphery of the MOS structure. The risk of processing with Pt electrodes in ferroelectric memories requires great care. Precautions like sealing the back surface and incorporating phosphorus doped polysilicon as the plug material are necessary to avoid the detrimental effects of Pt.

  2. Platinum nitride with fluorite structure

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Rong; Zhang, Xiao-Feng

    2005-01-31

    The mechanical stability of platinum nitride has been studied using first-principles calculations. By calculating the single-crystal elastic constants, we show that platinum nitride can be stabilized in the fluorite structure, in which the nitrogen atoms occupy all the tetrahedral interstitial sites of the metal lattice. The stability is attributed to the pseudogap effect from analysis of the electronic structure.

  3. Highly trifluoromethylated platinum compounds.

    Science.gov (United States)

    Martínez-Salvador, Sonia; Forniés, Juan; Martín, Antonio; Menjón, Babil

    2011-07-11

    The homoleptic, square-planar organoplatinum(II) compound [NBu(4)](2) [Pt(CF(3))(4)] (1) undergoes oxidative addition of CF(3) I under mild conditions to give rise to the octahedral organoplatinum(IV) complex [NBu(4)](2) [Pt(CF(3))(5)I] (2). This highly trifluoromethylated species reacts with Ag(+) salts of weakly coordinating anions in Me(2)CO under a wet-air stream to afford the aquo derivative [NBu(4)][Pt(CF(3))(5) (OH(2))] (4) in around 75% yield. When the reaction of 2 with the same Ag(+) salts is carried out in MeCN, the solvento compound [NBu(4) ][Pt(CF(3))(5)(NCMe)] (5) is obtained in around 80% yield. The aquo ligand in 4 as well as the MeCN ligand in 5 are labile and can be cleanly replaced by neutral and anionic ligands to furnish a series of pentakis(trifluoromethyl)platinate(IV) compounds with formulae [NBu(4)][Pt(CF(3))(5) (L)] (L=CO (6), pyridine (py; 7), tetrahydrothiophene (tht; 8)) and [NBu(4)](2) [Pt(CF(3))(5)X] (X=Cl (9), Br (10)). The unusual carbonyl-platinum(IV) derivative [NBu(4)][Pt(CF(3))(5) (CO)] (6) is thermally stable and has a ν(CO) of 2194 cm(-1). The crystal structures of 2⋅CH(2)Cl(2), 5, [PPh(4) ][Pt(CF(3))(5)(CO)] (6'), and 7 have been established by X-ray diffraction methods. Compound 2 has shown itself to be a convenient entry to the chemistry of highly trifluoromethylated platinum compounds. To the best of our knowledge, compounds 2 and 4-10 are the organoelement compounds with the highest CF(3) content to have been isolated and adequately characterized to date.

  4. Understanding platinum-induced ototoxicity.

    Science.gov (United States)

    Langer, Thorsten; am Zehnhoff-Dinnesen, Antoinette; Radtke, Susanne; Meitert, Johannes; Zolk, Oliver

    2013-08-01

    Childhood cancer survival rates are now nearly 80% in more developed European countries because of improved therapies and better supportive care. Platinum chemotherapy drugs, such as cisplatin and carboplatin, are the cornerstone of many effective therapeutic protocols for childhood cancer. However, the antitumor efficacy of cisplatin and carboplatin comes at the cost of ototoxicity, which affects at least 60% of pediatric patients. Although ototoxicity is not life threatening, it can have debilitating effects on patients' quality of life. Recently, many initiatives have been launched with the ultimate goal of reducing cisplatin and high-dose carboplatin ototoxicity without compromising antitumor efficacy. This review addresses the incidence of platinum ototoxicity and its clinical presentation, time course, and early diagnostic evaluation. Genetic and non-genetic risk factors for platinum-associated ototoxicity, and their predictive value, are discussed. Recent developments in the prevention of platinum ototoxicity are also summarized. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Investigation of a combined platinum and electron lifetime control treatment for silicon

    Science.gov (United States)

    Jia, Yunpeng; Cui, Zhihang; Yang, Fei; Zhao, Bao; Zou, Shikai; Liang, Yongsheng

    2017-02-01

    In silicon, the effect of Combined Lifetime Treatment (CLT) involving platinum diffusion and subsequent electron irradiation is different from the separate treatments of platinum diffusion and electron irradiation, even the treatment of electron irradiation followed by platinum diffusion. In this paper, we investigated the experimental behavior of different kinds of lifetime treated samples. We found that the reverse leakage current (Irr) increases with the increasing platinum diffusion temperature or electron irradiation dose in the separate treatments. Conversely, Irr of the CLT samples decreased with rising platinum diffusion temperature at the same dose of subsequent electron irradiation. By deep-level transient spectroscopy (DLTS), a new energy level E7 (Ec -0.376 eV) was found in our CLT samples. The new level E7 suppresses the dominance of the deeper level E8 (Ec -0.476 eV), which is caused by electron irradiation directly and results in Irr's increase. The formation of the level E7 comes from the complex defect-combined effect between platinum atoms and silicon vacancies, and it affects device's characteristics finally. These research will be helpful to the development of platinum-diffused devices used in intense electron irradiation environments.

  6. Inorganic nanocarriers for platinum drug delivery

    Directory of Open Access Journals (Sweden)

    Ping’an Ma

    2015-12-01

    Full Text Available Nowadays platinum drugs take up almost 50% of all the clinically used anticancer drugs. Besides cisplatin, novel platinum agents including sterically hindered platinum (II drugs, chemically reductive platinum (IV drugs, photosensitive platinum (IV drugs, and multinuclear platinum drugs have been developed recently, with a few entering clinic trials. Rapid development of nanobiotechnology makes targeted delivery of anticancer platinum agents to the tumor site possible, while simultaneously minimizing toxicity and maximizing the drug efficacy. Being versatile drug carriers to deliver platinum drugs, inorganic nanovehicles such as gold nanoparticles, iron oxide nanomaterials, carbon nanotubes, mesoporous nanosilica, metal-organic frameworks (MOFs, have been extensively studied over the past decades. In contrast to conventional polymeric and lipid nanoparticles, inorganic nanoparticles based drug carriers are peculiar as they have shown excellent theranostic effects, revealing themselves an indispensable part of future nanomedicine. Here, we will elaborate recent research advances on fabrication of inorganic nanoparticles for platinum drug delivery.

  7. Platinum availability for future automotive technologies.

    Science.gov (United States)

    Alonso, Elisa; Field, Frank R; Kirchain, Randolph E

    2012-12-04

    Platinum is an excellent catalyst, can be used at high temperatures, and is stable in many aggressive chemical environments. Consequently, platinum is used in many current industrial applications, notably automotive catalytic converters, and prospective vehicle fuel cells are expected to rely upon it. Between 2005 and 2010, the automotive industry used approximately 40% of mined platinum. Future automotive industry growth and automotive sales shifts toward new technologies could significantly alter platinum demand. The potential risks for decreased platinum availability are evaluated, using an analysis of platinum market characteristics that describes platinum's geophysical constraints, institutional efficiency, and dynamic responsiveness. Results show that platinum demand for an automotive fleet that meets 450 ppm greenhouse gas stabilization goals would require within 10% of historical growth rates of platinum supply before 2025. However, such a fleet, due largely to sales growth in fuel cell vehicles, will more strongly constrain platinum supply in the 2050 time period. While current platinum reserves are sufficient to satisfy this increased demand, decreasing platinum ore grade and continued concentration of platinum supply in a single geographic area are availability risk factors to platinum end-users.

  8. The Next Generation of Platinum Drugs: Targeted Pt(II) Agents, Nanoparticle Delivery, and Pt(IV) Prodrugs.

    Science.gov (United States)

    Johnstone, Timothy C; Suntharalingam, Kogularamanan; Lippard, Stephen J

    2016-03-09

    The platinum drugs, cisplatin, carboplatin, and oxaliplatin, prevail in the treatment of cancer, but new platinum agents have been very slow to enter the clinic. Recently, however, there has been a surge of activity, based on a great deal of mechanistic information, aimed at developing nonclassical platinum complexes that operate via mechanisms of action distinct from those of the approved drugs. The use of nanodelivery devices has also grown, and many different strategies have been explored to incorporate platinum warheads into nanomedicine constructs. In this Review, we discuss these efforts to create the next generation of platinum anticancer drugs. The introduction provides the reader with a brief overview of the use, development, and mechanism of action of the approved platinum drugs to provide the context in which more recent research has flourished. We then describe approaches that explore nonclassical platinum(II) complexes with trans geometry or with a monofunctional coordination mode, polynuclear platinum(II) compounds, platinum(IV) prodrugs, dual-threat agents, and photoactivatable platinum(IV) complexes. Nanoparticles designed to deliver platinum(IV) complexes will also be discussed, including carbon nanotubes, carbon nanoparticles, gold nanoparticles, quantum dots, upconversion nanoparticles, and polymeric micelles. Additional nanoformulations, including supramolecular self-assembled structures, proteins, peptides, metal-organic frameworks, and coordination polymers, will then be described. Finally, the significant clinical progress made by nanoparticle formulations of platinum(II) agents will be reviewed. We anticipate that such a synthesis of disparate research efforts will not only help to generate new drug development ideas and strategies, but also will reflect our optimism that the next generation of approved platinum cancer drugs is about to arrive.

  9. Cross-reactivity of Halogenated Platinum Salts

    Science.gov (United States)

    Halogenated platinum (Pt) salts are well-known respiratory sensitizers associated with the development of asthma. People may be exposed to a variety of platinum compounds in different contexts (e.g. occupationally, automobile exhaust). Published reports suggest that sensitizati...

  10. Synthesis of platinum nanoparticle electrocatalysts by atomic layer deposition

    Science.gov (United States)

    Lubers, Alia Marie

    Demand for energy continues to increase, and without alternatives to fossil fuel combustion the effects on our environment will become increasingly severe. Fuel cells offer a promising improvement on current methods of energy generation; they are able to convert hydrogen fuel into electricity with a theoretical efficiency of up to 83% and interface smoothly with renewable hydrogen production. Fuel cells can replace internal combustion engines in vehicles and are used in stationary applications to power homes and businesses. The efficiency of a fuel cell is maximized by its catalyst, which is often composed of platinum nanoparticles supported on carbon. Economical production of fuel cell catalysts will promote adoption of this technology. Atomic layer deposition (ALD) is a possible method for producing catalysts at a large scale when employed in a fluidized bed. ALD relies on sequential dosing of gas-phase precursors to grow a material layer by layer. We have synthesized platinum nanoparticles on a carbon particle support (Pt/C) by ALD for use in proton exchange membrane fuel cells (PEMFCs) and electrochemical hydrogen pumps. Platinum nanoparticles with different characteristics were deposited by changing two chemistries: the carbon substrate through functionalization; and the deposition process by use of either oxygen or hydrogen as ligand removing reactants. The metal depositing reactant was trimethyl(methylcyclopentadienyl)platinum(IV). Functionalizing the carbon substrate increased nucleation during deposition resulting in smaller and more dispersed nanoparticles. Use of hydrogen produced smaller nanoparticles than oxygen, due to a gentler hydrogenation reaction compared to using oxygen's destructive combustion reaction. Synthesized Pt/C materials were used as catalysts in an electrochemical hydrogen pump, a device used to separate hydrogen fuel from contaminants. Catalysts deposited by ALD on functionalized carbon using a hydrogen chemistry were the most

  11. Novel non-platinum metal catalyst material

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a novel non-platinum metal catalyst material for use in low temperature fuel cells and electrolysers and to fuel cells and electrolysers comprising the novel non-platinum metal catalyst material. The present invention also relates to a novel method for synthesizing...... the novel non-platinum metal catalyst material....

  12. Cosmetic comparison of gold weight and platinum chain insertion in primary upper eyelid loading for lagophthalmos.

    Science.gov (United States)

    Bladen, John C; Norris, Jonathan H; Malhotra, Raman

    2012-01-01

    Platinum chains are thinner than gold weights (GWs) and may confer a better eyelid curvature profile with reduced visibility. Outcomes compared eyelid measurements, cosmesis, and complications. Forty-two primary GW and 17 primary platinum chain insertions were identified and subsequently matched for laterality, pathology, and weight of implant. Twenty-two patients were randomly allocated into 2 groups for comparison; those receiving a GW (n = 11) or platinum chain (n = 11) to formulate a retrospective case-controlled study. Primary upper eyelid loading surgery with both implants involved a standard technique of a high tarsal placement with levator recession. Blinded assessment of preoperative and 6-month postoperative photographs calculated eyelid parameters: upper marginal reflex distance and lagophthalmos. Standardized photographs were used to define cosmesis in terms of abnormal eyelid contour and prominence. Gold weights demonstrated an improvement in eyelid parameters. Nine eyelids had prominent implants: mild (2), moderate (3), and severe (4). Eyelid contour was affected in 7 patients, 5 with droop, and 2 with flattened contour. Platinum chain improved eyelid measurements. Mild eyelid prominence was noted in 2 cases, but eyelid contour remained normal in all patients. No complications were noted with either the GW or the platinum chain implants. Both devices are successful in treating complications of lagophthalmos. Platinum chains appear less prominent and maintain normal eyelid contour. Although more expensive, platinum chains appear to be as safe and effective as GWs yet provide better cosmesis.

  13. Coating Carbon Fibers With Platinum

    Science.gov (United States)

    Effinger, Michael R.; Duncan, Peter; Coupland, Duncan; Rigali, Mark J.

    2007-01-01

    A process for coating carbon fibers with platinum has been developed. The process may also be adaptable to coating carbon fibers with other noble and refractory metals, including rhenium and iridium. The coated carbon fibers would be used as ingredients of matrix/fiber composite materials that would resist oxidation at high temperatures. The metal coats would contribute to oxidation resistance by keeping atmospheric oxygen away from fibers when cracks form in the matrices. Other processes that have been used to coat carbon fibers with metals have significant disadvantages: Metal-vapor deposition processes yield coats that are nonuniform along both the lengths and the circumferences of the fibers. The electrical resistivities of carbon fibers are too high to be compatible with electrolytic processes. Metal/organic vapor deposition entails the use of expensive starting materials, it may be necessary to use a furnace, and the starting materials and/or materials generated in the process may be hazardous. The present process does not have these disadvantages. It yields uniform, nonporous coats and is relatively inexpensive. The process can be summarized as one of pretreatment followed by electroless deposition. The process consists of the following steps: The surfaces of the fiber are activated by deposition of palladium crystallites from a solution. The surface-activated fibers are immersed in a solution that contains platinum. A reducing agent is used to supply electrons to effect a chemical reduction in situ. The chemical reduction displaces the platinum from the solution. The displaced platinum becomes deposited on the fibers. Each platinum atom that has been deposited acts as a catalytic site for the deposition of another platinum atom. Hence, the deposition process can also be characterized as autocatalytic. The thickness of the deposited metal can be tailored via the duration of immersion and the chemical activity of the solution.

  14. Platinum Group Metals New Material

    Institute of Scientific and Technical Information of China (English)

    XIE Ming; ZHANG Jiankang; WANG Saibei; HU Jieqiong; LIU Manmen; CHEN Yongtai; ZHANG Jiming; YANG Youcai; YANG Yunfeng; ZHANG Guoquan

    2012-01-01

    Platinum group metals (PGM) include six elements,namely Pt,Pd,Rh,Ir,Os and Ru.PGM and their alloys are the important fundamental materials for modern industry and national defense construction,they have special physical and chemical properties,widely used in metallurgy,chemical,electric,electronic,information,energy,environmental protection,aviation,aerospace,navigation and other high technology industry.Platinum group metals and their alloys,which have good plasticity and processability,can be processed to electrical contact materials,resistance materials,solder,electronic paste,temperature-measurement materials,elastic materials,magnetic materials and high temperature structural materials.

  15. Tungsten/Platinum Hybrid Nanowire Growth via Field Emission Using Nanorobotic Manipulation

    Directory of Open Access Journals (Sweden)

    Zhan Yang

    2011-01-01

    Full Text Available This paper reports tungsten-platinum hybrid nanowire growth via field emission, based on nanorobotic manipulation within a field emission scanning electron microscope (FESEM. A multiwalled carbon nanotube (MWCNT was used as the emitter, and a tungsten probe was used as the anode at the counterposition, by way of nanomanipulation. By independently employing trimethylcyclopentadienyl platinum (CpPtMe3 and tungsten hexacarbonyl (W(CO6 as precursors, the platinum nanowire grew on the tip of the MWCNT emitter. Tungsten nanowires then grew on the tip of the platinum nanowire. The hybrid nanowire length wascontrolled by nanomanipulation. Their purity was evaluated using energy-dispersive X-ray spectroscopy (EDS. Thus, it is possible to fabricate various metallic hybrid nanowires by changing the precursor materials. Hybrid nanowires have various applications in nanoelectronics, nanosensor devices, and nanomechanical systems.

  16. Synthesis and photophysical and electrochemical properties of new cyclometalated platinum complex containing oxadiazole ligand

    Institute of Scientific and Technical Information of China (English)

    DENG Ji-yong; LIU Yu; HU Zheng-yong; ZHU Mei-xiang; ZHU Wei-guo

    2007-01-01

    A new cyclometalated platinum complex containing 2, 5-bis(naphthalene-1-y1)-1,3,4-oxadiazole ligand was synthesized and characterized. The UV-Vis absorptions and photoluminescent properties of the ligand and its platinum complex were investigated.A characteristic metal-ligand charge transfer absorption peak at 439 nm in the UV spectrum and a strong emission peak at 625 nm in the photoluminescence spectrum were observed for this complex in dichloromethane. Cyclic voltammtry (CV) analysis shows that the EHOMO (energy level of the highest occupied molecular orbital) and ELUMO (energy level of the lowest unoccupied molecular orbital) of the platinum complex are about -5.69 and -3.25 eV, respectively, indicating that the oxadiazole-based platinum complex has a potential application in electrophosphorescent devices used as a red-emitting material.

  17. Nanocarriers for delivery of platinum anticancer drugs☆

    Science.gov (United States)

    Oberoi, Hardeep S.; Nukolova, Natalia V.; Kabanov, Alexander V.; Bronich, Tatiana K.

    2014-01-01

    Platinum based anticancer drugs have revolutionized cancer chemotherapy, and continue to be in widespread clinical use especially for management of tumors of the ovary, testes, and the head and neck. However, several dose limiting toxicities associated with platinum drug use, partial anti-tumor response in most patients, development of drug resistance, tumor relapse, and many other challenges have severely limited the patient quality of life. These limitations have motivated an extensive research effort towards development of new strategies for improving platinum therapy. Nanocarrier-based delivery of platinum compounds is one such area of intense research effort beginning to provide encouraging preclinical and clinical results and may allow the development of the next generation of platinum chemotherapy. This review highlights current understanding on the pharmacology and limitations of platinum compounds in clinical use, and provides a comprehensive analysis of various platinum–polymer complexes, micelles, dendrimers, liposomes and other nanoparticles currently under investigation for delivery of platinum drugs. PMID:24113520

  18. [Formylation of porphyrin platinum complexes].

    Science.gov (United States)

    Rumiantseva, V D; Konovalenko, L I; Nagaeva, E A; Mironov, A F

    2005-01-01

    The formylation reaction of platinum complexes of beta-unsubstituted porphyrins was studied. The interaction of deuteroporphyrin IX derivatives with the Vilsmeyer reagent led to the selective formylation of their macrocycles in the beta position. The resulting formyl derivatives of the porphyrins are of interest for fluorescent immunoassay.

  19. Electrodeposition of platinum-iridium alloy nanowires for hermetic packaging of microelectronics.

    Science.gov (United States)

    Petrossians, Artin; Whalen, John J; Weiland, James D; Mansfeld, Florian

    2012-01-01

    An electrodeposition technique was applied for fabrication of dense platinum-iridium alloy nanowires as interconnect structures in hermetic microelectronic packaging to be used in implantable devices. Vertically aligned arrays of platinum-iridium alloy nanowires with controllable length and a diameter of about 200 nm were fabricated using a cyclic potential technique from a novel electrodeposition bath in nanoporous aluminum oxide templates. Ti/Au thin films were sputter deposited on one side of the alumina membranes to form a base material for electrodeposition. Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) were used to characterize the morphology and the chemical composition of the nanowires, respectively. SEM micrographs revealed that the electrodeposited nanowires have dense and compact structures. EDS analysis showed a 60:40% platinum-iridium nanowire composition. Deposition rates were estimated by determining nanowire length as a function of deposition time. High Resolution Transmission Electron Microscopy (HRTEM) images revealed that the nanowires have a nanocrystalline structure with grain sizes ranging from 3 nm to 5 nm. Helium leak tests performed using a helium leak detector showed leak rates as low as 1 × 10(-11) mbar L s(-1) indicating that dense nanowires were electrodeposited inside the nanoporous membranes. Comparison of electrical measurements on platinum and platinum-iridium nanowires revealed that platinum-iridium nanowires have improved electrical conductivity.

  20. Surface characterization of platinum electrodes.

    Science.gov (United States)

    Solla-Gullón, José; Rodríguez, Paramaconi; Herrero, Enrique; Aldaz, Antonio; Feliu, Juan M

    2008-03-14

    The quantitative analysis of the different surface sites on platinum samples is attempted from pure voltammetric data. This analysis requires independent knowledge of the fraction of two-dimensional (111) and (100) domains. Specific site-probe reactions are employed to achieve this goal. Irreversibly-adsorbed bismuth and tellurium have been revealed to be sensitive to the presence of (111) terrace domains of different width whereas almost all sites involved in (100) ordered domains have been characterized through germanium adatoms. The experimental protocol follows that used with well-defined single-crystal electrodes and, therefore, requires careful control of the surface cleanliness. Platinum basal planes and their vicinal stepped surfaces have been employed to obtain calibration plots between the charge density measured under the adatom redox peak, specific for the type of surface site, and the corresponding terrace size. The evaluation of the (100) bidimensional domains can also be achieved using the voltammetric profiles, once the fraction of (111) ordered domains present in the polyoriented platinum has been determined and their featureless contribution has been subtracted from the whole voltammetric response. Using that curve, it is possible to perform a deconvolution of the adsorption states of the polycrystalline sample different from those related to (111) domains. The fraction of (100)-related states in the deconvoluted voltammogram can then be compared to that expected from the independent estimation coming from the charge involved in the redox process undergone by the irreversibly-adsorbed germanium and thus check the result of the deconvolution. The information about the surface-site distribution can also be applied to analyze the voltammetric profile of nanocrystalline platinum electrodes.

  1. Request for Correction 11001 Toxicological Review of Halogenated Platinum Salts and Platinum Compounds

    Science.gov (United States)

    Request for Correction by the International Platinum Group Metals Association seeking the correction of information disseminated in the draft EPA document Toxicological Review of Halogenated Platinum Salts and Platinum Compounds: In Support of Summary Information on the Integrated Risk Information System (IRIS).

  2. Phosphoric acid fuel cell platinum use study

    Science.gov (United States)

    Lundblad, H. L.

    1983-01-01

    The U.S. Department of Energy is promoting the private development of phosphoric acid fuel cell (PAFC) power plants for terrestrial applications. Current PAFC technology utilizes platinum as catalysts in the power electrodes. The possible repercussions that the platinum demand of PAFC power plant commercialization will have on the worldwide supply and price of platinum from the outset of commercialization to the year 2000 are investigated. The platinum demand of PAFC commercialization is estimated by developing forecasts of platinum use per unit of generating capacity and penetration of PAFC power plants into the electric generation market. The ability of the platinum supply market to meet future demands is gauged by assessing the size of platinum reserves and the capability of platinum producers to extract, refine and market sufficient quantities of these reserves. The size and timing of platinum price shifts induced by the added demand of PAFC commercialization are investigated by several analytical methods. Estimates of these price shifts are then used to calculate the subsequent effects on PAFC power plant capital costs.

  3. [Platinum compounds: metabolism, toxicity and supportive strategies].

    Science.gov (United States)

    Lipp, H P; Hartmann, J T

    2005-02-09

    Although the leading platinum compounds, cisplatin, carboplatin, and oxaliplatin, share some structural similarities, there are marked differences between them in therapeutic uses, pharmacokinetics, and adverse effects profiles. Compared with cisplatin, carboplatin has inferior efficacy in germ-cell tumors, head and neck cancers, and bladder and esophageal carcinomas, whereas the two drugs appear to have comparable efficacy in ovarian cancer, extensive small-cell lung cancers (SCLC), and advanced non-small-cell lung cancers (NSCLC). Oxaliplatin belongs to the group of diaminocyclohexane (DACH) platinum compounds. It is the first platinum-based drug that has marked efficacy in colorectal cancer when given in combination with 5-fluorouracil and folinic acid. Nedaplatin has been registered in Japan, whereas other derivatives, like JM216 (which is the only orally available platinum derivative), ZD0473, BBR3464, and SPI-77 (a liposomal formulation of cisplatin), are still under investigation. The adverse effects of platinum compounds are reviewed together with possible prevention strategies.

  4. Characterization of electrochemically modified polycrystalline platinum surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Krebs, L.C.; Ishida, Takanobu.

    1991-12-01

    The characterization of electrochemically modified polycrystalline platinum surfaces has been accomplished through the use of four major electrochemical techniques. These were chronoamperometry, chronopotentiommetry, cyclic voltammetry, and linear sweep voltammetry. A systematic study on the under-potential deposition of several transition metals has been performed. The most interesting of these were: Ag, Cu, Cd, and Pb. It was determined, by subjecting the platinum electrode surface to a single potential scan between {minus}0.24 and +1.25 V{sub SCE} while stirring the solution, that the electrocatalytic activity would be regenerated. As a consequence of this study, a much simpler method for producing ultra high purity water from acidic permanganate has been developed. This method results in water that surpasses the water produced by pyrocatalytic distillation. It has also been seen that the wettability of polycrystalline platinum surfaces is greatly dependent on the quantity of oxide present. Oxide-free platinum is hydrophobic and gives a contact angle in the range of 55 to 62 degrees. We have also modified polycrystalline platinum surface with the electrically conducting polymer poly-{rho}-phenylene. This polymer is very stable in dilute sulfuric acid solutions, even under applied oxidative potentials. It is also highly resistant to electrochemical hydrogenation. The wettability of the polymer modified platinum surface is severely dependent on the choice of supporting electrolyte chosen for the electrochemical polymerization. Tetraethylammonium tetrafluoroborate produces a film that is as hydrophobic as Teflon, whereas tetraethylammonium perchlorate produces a film that is more hydrophilic than oxide-free platinum.

  5. Room temperature synthesis of colloidal platinum nanoparticles

    Indian Academy of Sciences (India)

    G Sarala Devi; V J Rao

    2000-12-01

    Efficient preparation of stable dispersions of platinum nanoparticles from platinous chloride (K2PtCl4) was achieved by simultaneous addition of capping polymer material. The size of platinum nanoparticles was controlled by changing the ratio of concentration of capping polymer material to the concentration of platinum cation used. The morphology of colloidal particles were studied by means of UV-visible spectrophotometry and transmission electron microscopy (TEM). Particle size increased with low reagent concentration. The change in absorption spectra with the particle size was observed, i.e. blue shift attributed to decrease in particle size.

  6. Stabilizing platinum in phosphoric acid fuel cells

    Science.gov (United States)

    Remick, R. J.

    1981-10-01

    A carbon substrate for use in fabricating phosphoric acid fuel cell cathodes was modified by catalytic oxidation to stabilize the platinum catalyst by retarding the sintering of small platinum crystallites. Results of 100-hour operational tests confirmed that the rate of platinum surface area loss observed on catalytically oxidized supports was less than that observed with unmodified supports of the same starting material. Fuel cell electrodes fabricated from Vulcan XC-72R, which was modified by catalytic in a nitric oxide atmosphere, produced low platium sintering rates and high activity for the reduction of oxygen in the phosphoric acid environment.

  7. Antitumor effect of arabinogalactan and platinum complex.

    Science.gov (United States)

    Starkov, A K; Zamay, T N; Savchenko, A A; Ingevatkin, E V; Titova, N M; Kolovskaya, O S; Luzan, N A; Silkin, P P; Kuznetsova, S A

    2016-03-01

    The article presents the results of investigation of antitumor properties of platinum-arabinogalactan complex. We showed the ability of the complex to inhibit the growth of Ehrlich ascites tumor cells. It is found that the distribution of the platinum-arabinogalactan complex is not specific only for tumor cells in mice. The complex was found in all tissues and organs examined (ascites cells, embryonic cells, kidney, and liver). The mechanism of action of the arabinogalactan-platinum complex may be similar to cisplatin as the complex is able to accumulate in tumor cells.

  8. Mechanism of Platinum Derivatives Induced Kidney Injury

    Directory of Open Access Journals (Sweden)

    Feifei YAN

    2015-09-01

    Full Text Available Platinum derivatives are the most widely used chemotherapeutic agents to treat solid tumors including ovarian, head and neck, and testicular germ cell tumors, lung cancer, and colorectal cancer. Two major problems exist, however, in the clinic use of platinum derivatives. One is the development of tumor resistance to the drug during therapy, leading to treatment failure. The other is the drug’s toxicity such as the cisplatin’s nephrotoxicity, which limits the dose that can be administered. This paper describes the mechanism of platinum derivatives induced kidney injury.

  9. Palladium and platinum-palladium bi-layer based counter electrode for dye-sensitized solar cells with modified photoanode

    Science.gov (United States)

    Mokurala, Krishnaiah; Kamble, Anvita; Nemala, Siva Sankar; Bhargava, Parag; Mallick, Sudhanshu

    2015-06-01

    Dye sensitized solar cells (DSSCs) were fabricated with palladium (Pd) and platinum-palladium (Pt-Pd) bi-layer as counter electrodes, respectively. Effects of photoanode thickness and morphology on device performance were studied. DSSCs fabricated with Pd and Pd-Pt as counter electrode (CE) showed photo conversion efficiency of 4.30% and 6.20%, respectively as compared to Platinum (Pt) based CE which showed 6.65% efficiency. Lower device performance was explained with help of cyclic voltammetry and electrochemical impedance spectroscopy (EIS) measurements of the cells.

  10. Saturated Red Polymer Electrophosphorescent Devices with meso-Tetrakis (4-n-decanoyl-phenyl) Porphyrin Platinum (Ⅱ) Complex as Emitter%掺杂meso-四(对葵酰氧基苯基)卟啉铂的饱和红色聚合物发光器件

    Institute of Scientific and Technical Information of China (English)

    骆开均; 蒋世平; 张藜芳; 朱卫国; 王欣

    2011-01-01

    在聚2,7-(9,9-二辛基)芴(PFO)和30%的2-(对联苯基)-5-(对叔丁基苯基)-1,3,4-(噁)二唑(PBD)主体材料中掺杂短磷光寿命的meso-四(对正葵酰氧基苯基)卟啉铂(TDPPPt),制成聚合物基发光器件.器件结构为:ITO/PEDOT:PSS/PVK/PFO+ 30% PBD:TDPPPt/Ca/Al(ITO:氧化铟锡;PE DOT:聚3,4-乙撑二氧噻吩;PSS:聚苯乙烯磺酸盐;PVK:聚乙烯基咔唑).当客体掺杂浓度≥3%时,器件给出饱和的红色发射.当驱动电压从7V升高至14 V时,器件发光色度保持不变,CIE(国际发光照明委员会)色坐标稳定在(0.66,0.28)左右.器件的最大亮度和电流效率分别为1 390 cd/m2和1.34 cd/A.在电流密度100×10-3和150×10-3 A/cm2时,电流效率分别为1.18和0.99 cd/A,器件在高电流密度下具有良好的稳定性.%The saturated red polymer electrophosphorescent devices have been fabricated. With the device structures of ITO/PEDOT: PSS/PVK/PFO + 30% PBD: TDPPPt/Ca/Al (ITO:indium tin oxide, PEDOT: poly(3 ,4-ethylenedioxythiophene) , PSS: poly ( styrenesulfonate),PVKtpoly /V-vinyl carbazole) , based on short lifetime meso-tetrakis(4-n-decanoyl-phenyl) porphyrin platinum(H) complex(TDPPPt) and poly(2,7-9,9-dioctylfluorene ) ( PFO ) in which 30% 2-( bi-phenyl-4-yl) -5-( 4-tert-butylphenyl ) -1, 3 , 4-oxadiazole (PBD) was doped. The saturated red emission is obtained when doping concentration of TDPPPt is 3% ~ 10%. The CIE (Commission Internationale de L' Eclairage) coordinates of the device is about at (0. 66, 0. 28) and unchangeable when driven voltage increases from 7 V to 14 V. The maximum luminance and luminance efficiency (η1) is 1 390 cd/m2 at 18 V and 1.34 cd/A at 18 x 10-3 A/cm2, respectively. Furthermore, the devices show excellent stability under high driven current density. Η1 only drops to 88% and 73% of maximum efficiency at 100 X 10~3 A/cm2, and 150 X 10-3 A/cm2, respectively. We tentatively attribute excellent devices stability under high driven current density to the short

  11. Platinum-Resistor Differential Temperature Sensor

    Science.gov (United States)

    Kolbly, R. B.; Britcliffe, M. J.

    1985-01-01

    Platinum resistance elements used in bridge circuit for measuring temperature difference between two flowing liquids. Temperature errors with circuit are less than 0.01 degrees C over range of 100 degrees C.

  12. Fate of platinum metals in the environment.

    Science.gov (United States)

    Pawlak, Justyna; Łodyga-Chruścińska, Elżbieta; Chrustowicz, Jakub

    2014-07-01

    For many years now automotive exhaust catalysts have been used to reduce the significant amounts of harmful chemical substances generated by car engines, such as carbon monoxide, nitrogen oxides, and aromatic hydrocarbons. Although they considerably decrease environmental contamination with the above-mentioned compounds, it is known that catalysts contribute to the environmental load of platinum metals (essential components of catalysts), which are released with exhaust fumes. Contamination with platinum metals stems mainly from automotive exhaust converters, but other major sources also exist. Since platinum group elements (PGEs): platinum (Pt), palladium (Pd), rhodium (Rh), ruthenium (Ru) and iridium (Ir) seem to spread in the environment and accumulate in living organisms, they may pose a threat to animals and humans. This paper discusses the modes and forms of PGE emission as well as their impact on the environment and living organisms.

  13. VB Platinum Tile & Carpet, Inc. Information Sheet

    Science.gov (United States)

    VB Platinum Tile & Carpet, Inc. (the Company) is located in Bristow, Virginia. The settlement involves renovation activities conducted at a property constructed prior to 1978, located in Washington, DC.

  14. Stabilizing platinum in phosphoric acid fuel cells

    Science.gov (United States)

    Remick, R. J.

    1982-01-01

    Platinum sintering on phosphoric acid fuel cell cathodes is discussed. The cathode of the phosphoric acid fuel cell uses a high surface area platinum catalyst dispersed on a conductive carbon support to minimize both cathode polarization and fabrication costs. During operation, however, the active surface area of these electrodes decreases, which in turn leads to decreased cell performance. This loss of active surface area is a major factor in the degradation of fuel cell performance over time.

  15. Platinum in Earth surface environments

    Science.gov (United States)

    Reith, F.; Campbell, S. G.; Ball, A. S.; Pring, A.; Southam, G.

    2014-04-01

    Platinum (Pt) is a rare precious metal that is a strategic commodity for industries in many countries. The demand for Pt has more than doubled in the last 30 years due to its role in the catalytic conversion of CO, hydrocarbons and NOx in modern automobiles. To explore for new Pt deposits, process ores and deal with ecotoxicological effects of Pt mining and usage, the fundamental processes and pathways of Pt dispersion and re-concentration in surface environments need to be understood. Hence, the aim of this review is to develop a synergistic model for the cycling of Pt in Earth surface environments. This is achieved by integrating the geological/(biogeo)chemical literature, which focuses on naturally occurring Pt mobility around ore deposits, with the environmental/ecotoxicological literature dealing with anthropogenic Pt dispersion. In Pt deposits, Pt occurs as sulfide-, telluride- and arsenide, native metal and alloyed to other PGEs and iron (Fe). Increased mining and utilization of Pt combined with the burning of fossil fuels have led to the dispersion of Pt-containing nano- and micro-particles. Hence, soils and sediments in industrialized areas, urban environments and along major roads are now commonly Pt enriched. Platinum minerals, nuggets and anthropogenic particles are transformed by physical and (bio)geochemical processes. Complexation of Pt ions with chloride, thiosulfate, ammonium, cyanide, low- and high molecular weight organic acids (LMWOAs and HMWOAs) and siderophores can facilitate Pt mobilization. Iron-oxides, clays, organic matter and (micro)biota are known to sequester Pt-complexes and -particles. Microbes and plants are capable of bioaccumulating and reductively precipitating mobile Pt complexes. Bioaccumulation can lead to toxic effects on plants and animals, including humans. (Bio)mineralization in organic matter-rich sediments can lead to the formation of secondary Pt particles and -grains. Ultimately, Pt is enriched in oceanic sediments

  16. computer modeling ter modeling ter modeling of platinum reforming ...

    African Journals Online (AJOL)

    eobe

    naphtha to complex chemical reactions, at h temperature and ... at is leaving any stage of the platinum reforming reactors in terms of ... In this study, only platinum reforming .... IV. Hydrocracking of paraffinic hydrocarbons: +. →. ( +. +. +. +. ) (18).

  17. Novel platinum black electroplating technique improving mechanical stability.

    Science.gov (United States)

    Kim, Raeyoung; Nam, Yoonkey

    2013-01-01

    Platinum black microelectrodes are widely used as an effective neural signal recording sensor. The simple fabrication process, high quality signal recording and proper biocompatibility are the main advantages of platinum black microelectrodes. When microelectrodes are exposed to actual biological system, various physical stimuli are applied. However, the porous structure of platinum black is vulnerable to external stimuli and destroyed easily. The impedance level of the microelectrode increases when the microelectrodes are damaged resulting in decreased recording performance. In this study, we developed mechanically stable platinum black microelectrodes by adding polydopamine. The polydopamine layer was added between the platinum black structures by electrodeposition method. The initial impedance level of platinum black only microelectrodes and polydopamine added microelectrodes were similar but after applying ultrasonication the impedance value dramatically increased for platinum black only microelectrodes, whereas polydopamine added microelectrodes showed little increase which were nearly retained initial values. Polydopamine added platinum black microelectrodes are expected to extend the availability as neural sensors.

  18. Platinum uptake from chloride solutions using biosorbents

    Directory of Open Access Journals (Sweden)

    Mehmet Hakan Morcali

    2013-04-01

    Full Text Available Present work investigates platinum uptake from synthetically prepared, dilute platinum-bearing solutions using biomass residues, i.e. pistachio nut shell and rice husk, which are abundant in Turkey, and provides a comparison between these two biosorbents. Effects of the different uptake parameters, sorbent dosage, contact time, temperature and pH of solution on platinum uptake (% were studied in detail on a batch sorption. Before the pistachio nut shell was activated, platinum uptake (% was poor compared to the rice husk. However, after the pistachio nut shell was activated at 1000 °C under an argon atmosphere, the platinum uptake (% increased two-fold. The pistachio nut shell (original and activated and rice husk were shown to be better than commercially available activated carbon in terms of adsorption capacity. These two sorbents have also been characterized by FTIR and SEM. Adsorption equilibrium data best complied with the Langmuir isotherm model. Maximum adsorption capacities, Qmax, at 25 °C were found to be 38.31 and 42.02 mg.g- 1for the activated pistachio nut shell and rice husk, respectively. Thermodynamic calculations using the measured ∆H°, ∆S° and ∆G° values indicate that the uptake process was spontaneous and endothermic. The experimental data were shown to be fit the pseudo-second-order kinetic model.

  19. Electrochemical Fabrication and Electrocatalytic Properties of Nanostructured Mesoporous Platinum Microelectrodes

    Institute of Scientific and Technical Information of China (English)

    Mengyan NIE; Joanne M. Elliott

    2005-01-01

    Electrodeposition from a lyotropic liquid crystal template medium was used to produce nanostructured platinum microelectrodes with high specific surface area and high mass transport efficiency. Compared to polished and conventional platinized microelectrodes, well-ordered nanostructured platinum microelectrodes exhibited enhanced electrocatalytic properties for oxygen and ascorbic acid, whilst well-ordered nanostructured platinum microelectrodes offered improved electrocatalytic properties for oxygen reduction compared to disordered nanostructured platinum microelectrodes.

  20. Extensions of Callendar's equations for platinum resistance thermometry

    DEFF Research Database (Denmark)

    Diamond, Joseph M.

    1969-01-01

    measurements where the platinum thermometer and the measurement means may be less than ideal. To this end. Callendar's definition of platinum temperature is generalized to mean the temperature found by linear interpolation with a platinum thermometer between given fixed points and using a given measurement...

  1. Platinum Publications as of April 30, 2014 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  2. Platinum Publications, September 30–October 27, 2016 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  3. Platinum Publications as of June 25, 2014 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  4. Platinum Publications, July 1–July 28, 2016 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  5. Platinum Publications as of March 6, 2014 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  6. Platinum Publications, October 1–29, 2015 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  7. Platinum Publications, December 1–December 29, 2016 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected from among the most recently published Platinum Publications.

  8. Platinum Publications as of May 29, 2014 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  9. Platinum Publications as of September 25, 2014 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  10. Platinum Publications, January 26–February 28, 2017 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected from among the most recently published Platinum Publications.

  11. Platinum Publications as of December 3, 2013 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 21 prestigious science journals. This list represents new publications generated from PubMed as of the date shown above. Articles designated as Platinum Highlights are noteworthy articles selected by Dr. Craig Reynolds, associate director, National Cancer Institute, from among the most recently published Platinum Publications.

  12. Deposition of the platinum crystals on the carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A new technique and the affecting factors for depositing platinum on the carbon nanotubes were investigated. The results show that the deposited platinum crystals in the atmosphere of hydrogen or nitrogen have a small size and a homogeneous distribution on the surface of the carbon nanotubes. The pretreatment would decrease the platinum particles on the carbon nanotubes significantly.

  13. 76 FR 8627 - Revision of Class E Airspace; Platinum, AK

    Science.gov (United States)

    2011-02-15

    ... Federal Aviation Administration 14 CFR Part 71 Revision of Class E Airspace; Platinum, AK AGENCY: Federal... Platinum, AK, to accommodate the addition of a Standard Instrument Approach Procedure (SIAP), at the Platinum Airport. The FAA is taking this action to enhance safety and management of Instrument Flight...

  14. Surface decorated platinum carbonyl clusters

    Science.gov (United States)

    Ciabatti, Iacopo; Femoni, Cristina; Iapalucci, Maria Carmela; Longoni, Giuliano; Zacchini, Stefano; Zarra, Salvatore

    2012-06-01

    Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt13(CO)12{Cd5(μ-Br)5Br2(dmf)3}2]2- (1), [Pt19(CO)17{Cd5(μ-Br)5Br3(Me2CO)2}{Cd5(μ-Br)5Br(Me2CO)4}]2- (2), [H2Pt26(CO)20(CdBr)12]8- (3) and [H4Pt26(CO)20(CdBr)12(PtBr)x]6- (4) (x = 0-2), have been obtained from the reactions between [Pt3n(CO)6n]2- (n = 2-6) and CdBr2.H2O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt26Cd12 metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters.Four molecular Pt-carbonyl clusters decorated by Cd-Br fragments, i.e., [Pt13(CO)12{Cd5(μ-Br)5Br2(dmf)3}2]2- (1), [Pt19(CO)17{Cd5(μ-Br)5Br3(Me2CO)2}{Cd5(μ-Br)5Br(Me2CO)4}]2- (2), [H2Pt26(CO)20(CdBr)12]8- (3) and [H4Pt26(CO)20(CdBr)12(PtBr)x]6- (4) (x = 0-2), have been obtained from the reactions between [Pt3n(CO)6n]2- (n = 2-6) and CdBr2.H2O in dmf at 120 °C. The structures of these molecular clusters with diameters of 1.5-2 nm have been determined by X-ray crystallography. Both 1 and 2 are composed of icosahedral or bis-icosahedral Pt-CO cores decorated on the surface by Cd-Br motifs, whereas 3 and 4 display a cubic close packed Pt26Cd12 metal frame decorated by CO and Br ligands. An oversimplified and unifying approach to interpret the electron count of these surface decorated platinum carbonyl clusters is suggested, and extended to other low-valent organometallic clusters and Au-thiolate nanoclusters. CCDC 867747 and 867748. For crystallographic data in CIF or other electronic format see DOI: 10.1039/c2nr30400g

  15. Autonomous movement of platinum-loaded stomatocytes.

    Science.gov (United States)

    Wilson, Daniela A; Nolte, Roeland J M; van Hest, Jan C M

    2012-02-26

    Polymer stomatocytes are bowl-shaped structures of nanosize dimensions formed by the controlled deformation of polymer vesicles. The stable nanocavity and strict control of the opening are ideal for the physical entrapment of nanoparticles which, when catalytically active, can turn the stomatocyte morphology into a nanoreactor. Herein we report an approach to generate autonomous movement of the polymer stomatocytes by selectively entrapping catalytically active platinum nanoparticles within their nanocavities and subsequently using catalysis as a driving force for movement. Hydrogen peroxide is free to access the inner stomatocyte cavity, where it is decomposed by the active catalyst (the entrapped platinum nanoparticles) into oxygen and water. This generates a rapid discharge, which induces thrust and directional movement. The design of the platinum-loaded stomatocytes resembles a miniature monopropellant rocket engine, in which the controlled opening of the stomatocytes directs the expulsion of the decomposition products away from the reaction chamber (inner stomatocyte cavity).

  16. Platinum (II) azatetrabenzoporphyrins for near-infrared organic light emitting diodes

    Science.gov (United States)

    Huang, L.; Park, C. D.; Fleetham, T.; Li, J.

    2016-12-01

    This article describes a series of platinum (II) azatetrabenzoporphyrin emitters for near-infrared (NIR) organic light emitting diode (OLED) applications. Platinum (II) aza-triphenyltetrabenzoporphyrin (PtNTBP) results in a 72 nm shift in the photoluminescent (PL) emission spectrum to 842 nm compared to 770 nm of the platinum (II) tetraphenyltetrabenzoporphyrin (PtTPTBP). Also, the full width at half maximum of the emission spectrum of PtNTBP was significantly narrowed to 27 nm compared to 40 nm for PtTPTBP. The multilayer devices fabricated by thermal vacuum evaporation process employing PtTPTBP, PtNTBP, and cis-PtN2TBP exhibit electroluminescent (EL) emission peak at 770 nm, 848 nm, and 846 nm with the peak external quantum efficiency (EQE) of 8.0%, 2.8%, and 1.5%, respectively. Even with the decrease in EQE of devices employing PtNTBP and cis-PtN2TBP compared with those employing PtTPTBP, the combination of the spectral narrowing and the bathochromic shift to lower energy EL emission demonstrates the promise of PtNTBP for NIR applications. In the meanwhile, the solution-processed single-layer device using PtNTBP demonstrates the EQE of 0.33% and the peak EL emission at 844 nm.

  17. 2-Methoxycycloocta-1,5-dienyl platinum complexes as precursors for platinum nanoparticles

    Indian Academy of Sciences (India)

    Ninad Ghavale; Sandip Dey; Vimal K Jain; R Tewari

    2009-02-01

    Thermolysis of [Pt2 (-OR)2 (C8H12OMe)2] (R = Me or Ac) in hexadecylamine (HDA) at 210°C under argon atmosphere gave platinum nanoparticles which were characterized by XRD, EDAX and TEM analysis. Both spherical (∼ 10 nm) and rod-like (∼ 19 nm length with aspect ratio of 2.3) face centred cubic (fcc) platinum metal nanoparticles could be isolated. The thermogravimetric analyses of these complexes revealed that they undergo a single step decomposition leading to the formation of platinum metal powder.

  18. Solid-state dewetting of continuous thin platinum coatings

    Energy Technology Data Exchange (ETDEWEB)

    Hanief, N. [University of Cape Town, Private Bag X3, Rondebosch 7701 (South Africa); Topić, M.; Pineda-Vargas, C. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West (South Africa)

    2015-11-15

    Thermal stability of coatings is of crucial importance for reliability of electronic devices operating at high temperature. Thus, we investigated the Cr–Pt system where a thin platinum coating of 0.1 μm was deposited on chromium substrate and annealed at 1000 °C for 8 h. The scanning electron microscope (SEM) showed that a continuous and uniformly deposited Pt coating experienced the formation of “islands” after annealing. The grain-boundary grooving, dewetting and agglomeration were the main mechanisms of degradation of thermally annealed coatings. Results by μ-PIXE (particle-induced X-ray emission) and transmission electron microscope (TEM) showed the presence of Cr{sub 3}Pt phase in “islands” and the coating thickness was approximately 0.5 μm. The surrounding regions were left uncovered due to coating agglomeration at the expense of initially deposited coating.

  19. Efficient light emitting devices based on phosphorescent partially doped emissive layers

    KAUST Repository

    Yang, Xiaohui

    2013-05-29

    We report efficient organic light emitting devices employing an ultrathin phosphor emissive layer. The electroluminescent spectra of these devices can be tuned by introducing a low-energy emitting phosphor layer into the emission zone. Devices with the emissive layer consisting of multiple platinum-complex/spacer layer cells show a peak external quantum efficiency of 18.1%, which is among the best EQE values for platinum-complex based light emitting devices. Devices with an ultrathin phosphor emissive layer show stronger luminance decay with the operating time compared to the counterpart devices having a host-guest emissive layer.

  20. Electrochemical Analysis of the Electrodeposition of Platinum Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hae-Min; Cho, Sung-Woon; Kim, Jun-Hyun; Kim, Chang-Koo [Ajou University, Suwon (Korea, Republic of)

    2015-10-15

    A bath for electrodeposition of platinum nanoparticles on low-cost graphite substrates was developed to attach nanoparticles directly onto a substrate, and electrochemical characteristics of the electrodeposition of platinum nanoparticles were investigated. The reaction mechanism was examined by the analysis of polarization behavior. Cyclic voltammetry measurements revealed that the electrodeposition of platinum nanoparticles was limited by mass transfer. The chronoamperometric study showed an instantaneous nucleation mechanism during the electrodeposition of platinum nanoparticles on graphite. Because graphite is much cheaper than other carbon-based substrates, the electrodeposition of platinum nanoparticles on the graphite is expected to have useful applications.

  1. Outpatient desensitization in selected patients with platinum hypersensitivity reactions.

    Science.gov (United States)

    O'Malley, David M; Vetter, Monica Hagan; Cohn, David E; Khan, Ambar; Hays, John L

    2017-06-01

    Platinum-based chemotherapies are a standard treatment for both initial and recurrent gynecologic cancers. Given this widespread use, it is important to be aware of the features of platinum hypersensitivity reactions and the subsequent treatment of these reactions. There is also increasing interest in the development of desensitization protocols to allow patients with a history of platinum hypersensitivity to receive further platinum based therapy. In this review, we describe the management of platinum hypersensitivity reactions and the desensitization protocols utilized at our institution. We also describe the clinical categorizations utilized to triage patients to appropriate desensitization protocols. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Synthesis and characterization of new platinum(II) and platinum(IV) triphyrin complexes.

    Science.gov (United States)

    Xue, Zhaoli; Kuzuhara, Daiki; Ikeda, Shinya; Okujima, Tetsuo; Mori, Shigeki; Uno, Hidemitsu; Yamada, Hiroko

    2013-02-18

    Metalation of 6,13,20,21-tetrakis(4-methylphenyl)-22H-tribenzo[14]triphyrin(2.1.1) with PtCl(2) gave a platinum(II) complex having a square-planar coordination structure with two pyrrolic nitrogen atoms and two chloride ions, with a saddle-shaped macrocycle. This platinum(II) complex was easily oxidized by air to an octahedral platinum(IV) complex coordinated by three pyrrolic nitrogen atoms as a tridentate monoanionic cyclic ligand and three chloride ions. When platinum(II) triphyrin was crystallized in air, an oxygen atom was incorporated between two α-carbon atoms of the pyrroles as an oxygen bridge to intercept the 14π aromatic system.

  3. Ruthenium–Platinum Catalysts and Direct Methanol Fuel Cells (DMFC: A Review of Theoretical and Experimental Breakthroughs

    Directory of Open Access Journals (Sweden)

    Ana S. Moura

    2017-02-01

    Full Text Available The increasing miniaturization of devices creates the need for adequate power sources and direct methanol fuel cells (DMFC are a strong option in the various possibilities under current development. DMFC catalysts are mostly based on platinum, for its outperformance in three key areas (activity, selectivity and stability within methanol oxidation framework. However, platinum poisoning with products of methanol oxidation led to the use of alloys. Ruthenium–platinum alloys are preferred catalysts active phases for methanol oxidation from an industrial point of view and, indeed, ruthenium itself is a viable catalyst for this reaction. In addition, the route of methanol decomposition is crucial in the goal of producing H2 from water reaction with methanol. However, the reaction pathway remains elusive and new approaches, namely in computational methods, have been ensued to determine it. This article reviews the various recent theoretical approaches for determining the pathway of methanol decomposition, and systematizes their validation with experimental data, within methodological context.

  4. De-alloyed platinum nanoparticles

    Science.gov (United States)

    Strasser, Peter [Houston, TX; Koh, Shirlaine [Houston, TX; Mani, Prasanna [Houston, TX; Ratndeep, Srivastava [Houston, TX

    2011-08-09

    A method of producing de-alloyed nanoparticles. In an embodiment, the method comprises admixing metal precursors, freeze-drying, annealing, and de-alloying the nanoparticles in situ. Further, in an embodiment de-alloyed nanoparticle formed by the method, wherein the nanoparticle further comprises a core-shell arrangement. The nanoparticle is suitable for electrocatalytic processes and devices.

  5. Anticancer platinum (IV) prodrugs with novel modes of activity.

    Science.gov (United States)

    Chin, Chee Fei; Wong, Daniel Yuan Qiang; Jothibasu, Ramasamy; Ang, Wee Han

    2011-01-01

    Over the past four decades, the search for improved platinum drugs based on the classical platinum (II)-diam(m)ine pharmacophore has yielded only a handful of successful candidates. New methodologies centred on platinum (IV) complexes, with better stability and expanded coordination spheres, offer the possibility of overcoming limitations inherent to platinum (II) drugs. In this review, novel strategies of targeting and killing cancer cells using platinum (IV) constructs are discussed. These approaches exploit the unique electrochemical characteristics and structural attributes of platinum (IV) complexes as a means of developing anticancer prodrugs that can target and selectively destroy cancer cells. Anticancer platinum (IV) prodrugs represent promising new strategies as targeted chemotherapeutic agents in the ongoing battle against cancer.

  6. The Dynamics of Platinum Precipitation in an Ion Exchange Membrane

    CERN Document Server

    Burlatsky, S F; Atrazhev, V V; Dmitriev, D V; Kuzminyh, N Y; Erikhman, N S

    2013-01-01

    Microscopy of polymer electrolyte membranes that have undergone operation under fuel cell conditions, have revealed a well defined band of platinum in the membrane. Here, we propose a physics based model that captures the mechanism of platinum precipitation in the polymer electrolyte membrane. While platinum is observed throughout the membrane, the preferential growth of platinum at the band of platinum is dependent on the electrochemical potential distribution in the membrane. In this paper, the location of the platinum band is calculated as a function of the gas concentration at the cathode and anode, gas diffusion coefficients and solubility constants of the gases in the membrane, which are functions of relative humidity. Under H2/N2 conditions the platinum band is located near the cathode-membrane interface, as the oxygen concentration in the cathode gas stream increases and/or the hydrogen concentration in the anode gas stream decreases, the band moves towards the anode. The model developed in this paper...

  7. Platinum compounds with anti-tumour activity

    NARCIS (Netherlands)

    Plooy, A.C.M.; Lohman, P.H.M.

    1980-01-01

    Ten platinum (Pt) coordination complexes with different ligands, comprising both Pt(II) and Pt(IV) complexes of which the cis-compounds all possessed at least some anti-tumour activity and the trans-compounds were inactive, were tested as to their effect on cell survival and the induction and repair

  8. On the enzymatic formation of platinum nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Govender, Y.; Riddin, T. L. [Rhodes University, Department of Biochemistry, Microbiology and Biotechnology (South Africa); Gericke, M. [MINTEK (South Africa); Whiteley, C. G., E-mail: C.Whiteley@ru.ac.z [Rhodes University, Department of Biochemistry, Microbiology and Biotechnology (South Africa)

    2010-01-15

    A dimeric hydrogenase enzyme (44.5 and 39.4 kDa sub units) was isolated in a 39.5% yield from the fungus Fusarium oxysporum and purified 4.64-fold by ion exchange chromatography on Sephacryl S-200. Characterisation of the enzyme afforded pH and temperature optima of 7.5 and 38 {sup o}C, respectively, a half-life stability of 36 min and a V{sub max} and K{sub m} of 3.57 nmol min{sup -1} mL{sup -1} and 2.25 mM, respectively. This enzyme was inhibited (non-competitively) by hydrogen hexachloroplatinic acid (H{sub 2}PtCl{sub 6}) at 1 or 2 mM with a K{sub i} value of 118 {mu}M. Incubation of the platinum salt with the pure enzyme under an atmosphere of hydrogen and optimum enzyme conditions (pH 7.5, 38 {sup o}C) afforded <10% bioreduction after 8 h while at conditions suitable for platinum nanoparticle formation (pH 9, 65 {sup o}C) over 90% reduction took place after the same length of time. Cell-free extract from the fungal isolates produced nearly 90% bioreduction of the platinum salt under both pH and temperature conditions. The bioreduction of the platinum salt by a hydrogenase enzyme takes place by a passive process and not an active one as previously understood.

  9. Platinum catalysed hydrolytic amidation of unactivated nitriles

    NARCIS (Netherlands)

    Cobley, Christopher J.; Heuvel, Marco van den; Abbadi, Abdelilah; Vries, Johannes G. de

    2000-01-01

    The platinum(II) complex, [(Me2PO··H··OPMe2)PtH(PMe2OH)], efficiently catalyses the direct conversion of unactivated nitriles to N-substituted amides with both primary and secondary amines. Possible mechanisms for this reaction are discussed and evidence for initial amidine formation is reported.

  10. Targeting Platinum Compounds: synthesis and biological activity

    OpenAIRE

    VAN ZUTPHEN, Steven

    2005-01-01

    Inspired by cisplatin, the inorganic drug discovered by Barnett Rosenberg in 1965, the research described in this thesis uses targeting ligands, or ligands varied in a combinatorial fashion, to find platinum complexes with more specific modes of action. These studies have lead to the development of novel (solid-phase) synthetic methods and to the discovery of several compounds with promising biological properties.

  11. Targeting Platinum Compounds : synthesis and biological activity

    NARCIS (Netherlands)

    Zutphen, Steven van

    2005-01-01

    Inspired by cisplatin, the inorganic drug discovered by Barnett Rosenberg in 1965, the research described in this thesis uses targeting ligands, or ligands varied in a combinatorial fashion, to find platinum complexes with more specific modes of action. These studies have lead to the development of

  12. Skin Sensitizing Potency of Halogenated Platinum Salts.

    Science.gov (United States)

    The relationship between occupational exposure to halogenated platinum (Pt) salts and Pt-specific allergic sensitization is well-established. Although human case reports and clinical studies demonstrate that Pt salts are potent skin sensitizers, no studies have been published tha...

  13. Platinum catalysed hydrolytic amidation of unactivated nitriles

    NARCIS (Netherlands)

    Cobley, Christopher J.; Heuvel, Marco van den; Abbadi, Abdelilah; Vries, Johannes G. de

    2000-01-01

    The platinum(II) complex, [(Me2PO··H··OPMe2)PtH(PMe2OH)], efficiently catalyses the direct conversion of unactivated nitriles to N-substituted amides with both primary and secondary amines. Possible mechanisms for this reaction are discussed and evidence for initial amidine formation is reported. Is

  14. Concurrent chemoradiotherapy comparison of taxanes and platinum versus 5-fluorouracil and platinum in nasopharyngeal carcinoma treatment

    Institute of Scientific and Technical Information of China (English)

    Chen Xichuang; Hong Yuan; Feng Jinhua; Ye Jianlin; Zheng Panpan; Guan Xiyin; You Xiaohong

    2014-01-01

    Background Nasopharyngeal carcinoma (NPC) is a squamous-cell carcinoma especially prevailing among the natives of southern China.The regimen of concurrent chemoradiotherapy (CCRT) that include platinum and 5-fluorouracil (5-FU)is considered to be the standard treatment for NPC.However,its clinical use is limited by its toxicity.Our purpose was to evaluate the efficacy and safety of the regimen of CCRT with taxanes and platinum versus the regimen of CCRT with 5-FU and platinum in NPC treatment.Methods Medline,the Cochrane library,and the Chinese medical literature database were searched for eligible studies.Meta-analysis was performed using Review Manager (Version 5.2).Results Six random controlled trials (RCTs) including 514 patients met our criteria.Meta-analysis showed that the regimen of CCRT with taxanes and platinum had an improved significant difference in complete remission (CR) and less incidence rate in adverse reactions such as gastrointestinal impairment grades Ⅲll-Ⅳ,liver and kidney impairment grades Ⅰ-Ⅱ,and radiodermatitis grades Ⅲ-Ⅳ versus the conventional regimen of CCRT with 5-FU and platinum,while the long-term effectiveness rate of overall survival,Iocoregional failure-free survival,or distant metastasis failure-free survival between the two groups was therapeutic equivalence.Conclusions The regimen of CCRT with taxanes and platinum in NPC therapy may be more efficient and safe compared to the conventional modality of 5-FU and platinum in CCRT.However,we need more high-quality studies of multi-center and randomized double-blind clinical trials to further compare,analyze,and confirm the findings.

  15. Remarkable NO oxidation on single supported platinum atoms.

    Science.gov (United States)

    Narula, Chaitanya K; Allard, Lawrence F; Stocks, G M; Moses-DeBusk, Melanie

    2014-11-28

    Our first-principles density functional theoretical modeling suggests that NO oxidation is feasible on fully oxidized single θ-Al2O3 supported platinum atoms via a modified Langmuir-Hinshelwood pathway. This is in contrast to the known decrease in NO oxidation activity of supported platinum with decreasing Pt particle size believed to be due to increased platinum oxidation. In order to validate our theoretical study, we evaluated single θ-Al2O3 supported platinum atoms and found them to exhibit remarkable NO oxidation activity. A comparison of turnover frequencies (TOF) of single supported Pt atoms with those of platinum particles for NO oxidation shows that single supported Pt atoms are as active as fully formed platinum particles. Thus, the overall picture of NO oxidation on supported Pt is that NO oxidation activity decreases with decreasing Pt particle size but accelerates when Pt is present only as single atoms.

  16. Synthesis of Bimetallic Platinum Nanoparticles for Biosensors

    Directory of Open Access Journals (Sweden)

    Gerard M. Leteba

    2013-08-01

    Full Text Available The use of magnetic nanomaterials in biosensing applications is growing as a consequence of their remarkable properties; but controlling the composition and shape of metallic nanoalloys is problematic when more than one precursor is required for wet chemistry synthesis. We have developed a successful simultaneous reduction method for preparation of near-spherical platinum-based nanoalloys containing magnetic solutes. We avoided particular difficulties in preparing platinum nanoalloys containing Ni, Co and Fe by the identification of appropriate synthesis temperatures and chemistry. We used transmission electron microscopy (TEM to show that our particles have a narrow size distribution, uniform size and morphology, and good crystallinity in the as-synthesized condition. Energy dispersive spectroscopy (EDS and X-ray diffraction (XRD confirms the coexistence of Pt with the magnetic solute in a face-centered cubic (FCC solid solution.

  17. Catalytic converters as a source of platinum

    Directory of Open Access Journals (Sweden)

    A. Fornalczyk

    2011-10-01

    Full Text Available The increase of Platinum Group Metals demand in automotive industry is connected with growing amount of cars equipped with the catalytic converters. The paper presents the review of available technologies during recycling process. The possibility of removing platinum from the used catalytic converters applying pyrometallurgical and hyrdometallurgical methods were also investigated. Metals such as Cu, Pb, Ca, Mg, Cd were used in the pyrometallurgical research (catalytic converter was melted with Cu, Pb and Ca or Mg and Cd vapours were blown through the whole carrier. In hydrometallurgical research catalytic converters was dissolved in aqua regia. Analysis of Pt contents in the carrier before and after the process was performed by means of atomic absorption spectroscopy. Obtained result were discussed.

  18. Examining the surfaces in used platinum catalysts

    Directory of Open Access Journals (Sweden)

    Trumić B.

    2009-01-01

    Full Text Available For the purpose of finding more advanced platinum catalyst manufacturing technologies and achieving a higher degree of ammonia oxidation, metallographic characterization has been done on the surface of catalyst gauzes and catalyst gripper gauzes made from platinum and palladium alloys. For the examined samples of gauzes as well as the cross section of the wires, a chemical analysis was provided. The purpose of this paper is the metallographic characterization of examined alloys carried out by way of electronic microscopic scanning, X-rays as well as chemical assays which contributed greatly to a better understanding of the surface deactivation, in other words a better consideration of structural changes occurring on the wire surface.

  19. Stability of Porous Platinum Nanoparticles: Combined In Situ TEM and Theoretical Study

    DEFF Research Database (Denmark)

    Chang, Shery L. Y.; Barnard, Amanda S.; Dwyer, Christian

    2012-01-01

    Porous platinum nanoparticles provide a route for the development of catalysts that use less platinum without sacrificing catalytic performance. Here, we examine porous platinum nanoparticles using a combination of in situ transmission electron microscopy and calculations based on a first...

  20. Platinum Acetylide Two-Photon Chromophores (Preprint)

    Science.gov (United States)

    2007-04-01

    the higher energy range that lead to its photodegradation . Secondly, because there is a quadratic dependence of two-photon absorption (2PA) on the...to either an electron donating amino- fluorenyl or electron withdrawing benzothiazolyl-fluorene that are themselves known as two-photon absorbing dyes ...groups in place of phenyl groups have shown a doubling of the intrinsic cr2value at 740 nm.40,41In this paper we describe novel platinum dyes that

  1. Redeposition of electrochemically dissolved platinum as nanoparticles on carbon

    DEFF Research Database (Denmark)

    Norgaard, C. F.; Stamatin, S. N.; Skou, E. M.

    2014-01-01

    Electrochemical dissolution of platinum has been proposed by several research groups as an environmentally friendly way to recover platinum from catalytic structures such as fuel cell electrodes. For the case of electrochemical dissolution of platinum in hydrochloric acid electrolyte, the present...... on carbon was then identified, quantified, and the particle size evaluated by powder X-ray diffraction, thermogravimetric analysis and cyclic voltammetry. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved....

  2. Platinum germanium ordering in UPtGe

    Science.gov (United States)

    Hoffmann, Rolf-Dieter; Pöttgen, Rainer; Lander, Gerry H.; Rebizant, Jean

    2001-09-01

    The non-centrosymmetric structure of UPtGe was investigated by X-ray diffraction on both powders and single crystals: EuAuGe type, Imm2, a=432.86(5), b=718.81(8), c=751.66(9) pm, wR2=0.0738 for 399 F2 values and 22 variables. The platinum and germanium atoms form two-dimensional layers of puckered Pt 3Ge 3 hexagons with short PtGe intralayer distances of 252 and 253 pm. These condensed two-dimensionally infinite nets are interconnected to each other via weak PtPt contacts with bond distances of 300 pm. The two crystallographically independent uranium atoms are situated above and below the six-membered platinum-germanium rings. The U1 atoms have six closer germanium neighbors while the U2 atoms have six closer platinum neighbors. The group-subgroup relation with the KHg 2 type structure is presented.

  3. Preparation and Electrochemical Properties of Porous Platinum Electrode

    Institute of Scientific and Technical Information of China (English)

    HE Xin; CHEN Boxun; CHEN Qiao

    2012-01-01

    Porous platinum electrodes were prepared by adding YSZ,as an active material,in platinum paste.Relationship between microstructure and electrochemical performance of O2(g),Pt/YSZ electrode have been characterized by SEM and cyclic voltammetry.Results showed that the microstructure of platinum electrode is a significant impact on the cyclic voltammetry.With the increase of platinum electrode's porosity,the area of three-phase boundary of O2(g)/Pt/YSZ was increased.The electrochemical reactivity was also enhanced.These were presented as the increase of current density and cathode voltage in cyclic voltammetry.

  4. Controlled synthesis of porous platinum nanostructures for catalytic applications.

    Science.gov (United States)

    Cao, Yanqin; Zhang, Junwei; Yang, Yong; Huang, Zhengren; Long, Nguyen Viet; Nogami, Masayuki

    2014-02-01

    Porous platinum, that has outstanding catalytic and electrical properties and superior resistant characteristics to corrosion, has been widely applied in chemical, petrochemical, pharmaceutical, electronic, and automotive industries. As the catalytic activity and selectivity depend on the size, shape and structure of nanomaterials, the strategies for controlling these factors of platinum nanomaterials to get excellent catalytic properties are discussed. Here, recent advances in the design and preparation of various porous platinum nanostructures are reviewed, including wet-chemical synthesis, electro-deposition, galvanic replacement reaction and de-alloying technology. The applications of various platinum nanostructures are also discussed, especially in fuel cells.

  5. The Effect of Β-casein Nanoparticles on Bioavailability and Cellular Uptake of Platinum Complex as a Cancer Drug

    Directory of Open Access Journals (Sweden)

    M Razmi

    2013-12-01

    Full Text Available Abstract Background & aim: Due to the low solubility and high toxicity of drugs, treatment of cancers is problematic therefore, the encapsulation and targeted delivery of therapeutic effect is required. The aim of this study was to investigate the effect of nanoparticles on cellular uptake and bioavailability of beta-casein on platinum complexes as cancer drugs. Methods: In the present experimental study, the physicochemical properties of nanoparticles as drug carriers of beta-casein devices using dynamic light scattering (DLS and scanning electron microscopy (SEM were investigated. In order to evaluate the toxicity effects of platinum complexes, the colon cancer cells in the absence or presence of free platinum complex concentration and nanoparticle loaded with platinum complexes were incubated for 24 and 48 hours. LD50 Values (concentration of compound causing 50% mortality in the cells was determined using the MTT assay. Data were analyzed by ANOVA and post-hoc test. Results: At a concentration of 1 mg ml, beta-casein nanoparticle drug carriers were synthesized in the range of 100 to 300 µM. In addition, the mortality rate in cancer cells by the release of platinum complexes (without and with the capsule, were 70 and 26 in 24 hours, and 60 µM and 21 µM in 48 hours respectively, Conclusion: The study showed that the bioavailability of the encapsulated platinum complexes increases and new drug delivery system may be a good candidate for the treatment of cancer. Key words: Beta-casein, Pt (II Complex, Bioavalibility, Nanocarrier, Micelle

  6. How much platinum passes the placental barrier? Analysis of platinum applications in 21 patients with cervical cancer during pregnancy.

    Science.gov (United States)

    Köhler, Christhardt; Oppelt, Peter; Favero, Giovanni; Morgenstern, Bernd; Runnebaum, Ingo; Tsunoda, Audrey; Schmittel, Alexander; Schneider, Achim; Mueller, Michael; Marnitz, Simone

    2015-08-01

    Cervical cancer is the most common solid cancer diagnosed in pregnancy. Platinum is an active drug in the treatment of patients with cervical cancer. In the second and third trimesters, platinum is used to prevent cancer progression until fetal maturity is reached. However, knowledge about the transplacental passage of platinum is very limited. Between May 2008 and June 2014, platinum-based neoadjuvant chemotherapy was applied to 21 consecutive patients with cervical cancer diagnosed in their second trimester. At the time of delivery by cesarean delivery, synchronous samples from maternal blood, umbilical cord blood, and amniotic fluid were taken and analyzed for platinum concentrations. The mean week of gestation at cancer diagnosis was 17 (13-23). On average 3 (range, 2-4) cycles of chemotherapy were applied. Cesarean deliveries were carried out between 30.4 and 36.5 weeks of gestation. Twenty-two healthy babies without renal, hepatic, auditory, or hematopoietic impairment were delivered. Platinum concentrations in umbilical cord blood and amniotic fluid were 23-65% and 11-42% of the maternal blood, respectively. This series on in vivo measurement of platinum concentrations in the fetomaternal compartment observed that because of consistently lower platinum values in the fetoplacental unit, a placental filtration mechanism of platinum may be assumed. Copyright © 2015 Elsevier Inc. All rights reserved.

  7. Simultaneous detection of the spin-Hall magnetoresistance and the spin-Seebeck effect in platinum and tantalum on yttrium iron garnet

    NARCIS (Netherlands)

    Vlietstra, N.; Shan, J.; van Wees, B. J.; Isasa, M.; Casanova, F.; Ben Youssef, J.

    2014-01-01

    The spin-Seebeck effect (SSE) in platinum (Pt) and tantalum (Ta) on yttrium iron garnet has been investigated by both externally heating the sample (using an on-chip Pt heater on top of the device) and by current-induced heating. For SSE measurements, external heating is the most common method to ob

  8. Modelling and sensitivity analysis of urinary platinum excretion in anticancer chemotherapy for the recovery of platinum

    DEFF Research Database (Denmark)

    Folens, Karel; Mortier, Séverine Thérèse F C; Baeten, Janis

    2016-01-01

    Platinum (Pt) based antineoplastics are important in cancer therapy. To date the Pt which is urinary excreted by the patients ends up in wastewater. This is disadvantageous from both an economic as from an ecological point of view because Pt is a valuable material and the excretion products are t...

  9. Corrosion Studies of Platinum Nano-Particles for Fuel Cells

    DEFF Research Database (Denmark)

    Shim, Signe Sarah

    The main focus of the present thesis is on corrosion and prevention of corrosion of platinum particles supported on carbon. This is important for instance in connection with start up and shutdown of fuel cells. The degradation mechanism of platinum particles supported on carbon has been...

  10. Counter electrodes from polymorphic platinum-nickel hollow alloys for high-efficiency dye-sensitized solar cells

    Science.gov (United States)

    Wang, Jing; Tang, Qunwei; He, Benlin; Yang, Peizhi

    2016-10-01

    Precious platinum counter electrode (CE) has been an economic burden for future commercialization of dye-sensitized solar cells (DSSCs). Low-platinum alloy CE catalysts are promising in bringing down the solar cell cost without reducing photovoltaic performances. We present here a facile strategy of fabricating ZnO nanorods assisted platinum-nickel (PtNi) alloy microtube CEs for liquid-junction DSSCs. By adjusting the concentration of zinc precursors, the ZnO nanostructures and therefore PtNi alloys are optimized to maximize the electrocatalytic behaviors toward triiodide reduction reaction. The maximal power conversion efficiency is determined as high as 8.43% for liquid-junction DSSC device with alloyed PtNi microtube CE synthesized at 75 mM Zn(NO3)2 aqueous solution, yielding a 32.8% enhancement in cell efficiency in comparison with the solar cell from pristine platinum electrode. Moreover, the dissolution resistance and charge-transfer ability toward redox couples have also been markedly enhanced due to competitive dissolution reactions and alloyed effects.

  11. Platinum-induced neurotoxicity: A review of possible mechanisms.

    Science.gov (United States)

    Kanat, Ozkan; Ertas, Hulya; Caner, Burcu

    2017-08-10

    Patients treated with platinum-based chemotherapy frequently experience neurotoxic symptoms, which may lead to premature discontinuation of therapy. Despite discontinuation of platinum drugs, these symptoms can persist over a long period of time. Cisplatin and oxaliplatin, among all platinum drugs, have significant neurotoxic potential. A distal dose-dependent symmetrical sensory neuropathy is the most common presentation of platinum neurotoxicity. DNA damage-induced apoptosis of dorsal root ganglion (DRG) neurons seems to be the principal cause of neurological symptoms. However, DRG injury alone cannot explain some unique symptoms such as cold-aggravated burning pain affecting distal extremities that is observed with oxaliplatin administration. In this article, we briefly reviewed potential mechanisms for the development of platinum drugs-associated neurological manifestations.

  12. Under-Reported Aspects of Platinum Drug Pharmacology

    Directory of Open Access Journals (Sweden)

    Dirk Theile

    2017-02-01

    Full Text Available Platinum drugs remain the backbone of many antineoplastic regimens. Among the numerous chemical or pharmacological effects of platinum drugs, some aspects tend to be under-reported. Thus, this perspective paper intends to stress some neglected properties of platinum drugs: first, the physico-chemical characteristics (aquation reaction kinetics that determine site-specific toxicity; second, the impact on RNA molecules. Knowledge of the ‘RNA world’ has dramatically changed our understanding of cellular and molecular biology. The inherent RNA-crosslinking properties should make platinum-based drugs interact with coding and non-coding RNAs. Third, we will discuss the impact on the immune system, which is now recognized to substantially contribute to chemotherapy efficacy. Together, platinum drugs are in fact old drugs, but are worth re-focusing on. Many aspects are still mysterious but can pave the way to new drugs or an improved application of the already existing compounds.

  13. High Quality Factor Platinum Silicide Microwave Kinetic Inductance Detectors

    CERN Document Server

    Szypryt, P; Ulbricht, G; Bumble, B; Meeker, S R; Bockstiegel, C; Walter, A B

    2016-01-01

    We report on the development of Microwave Kinetic Inductance Detectors (MKIDs) using platinum silicide as the sensor material. MKIDs are an emerging superconducting detector technology, capable of measuring the arrival times of single photons to better than two microseconds and their energies to around ten percent. Previously, MKIDs have been fabricated using either sub-stoichiometric titanium nitride or aluminum, but TiN suffers from spatial inhomogeneities in the superconducting critical temperature and Al has a low kinetic inductance fraction, causing low detector sensitivity. To address these issues, we have instead fabricated PtSi microresonators with superconducting critical temperatures of 944$\\pm$12~mK and high internal quality factors ($Q_i \\gtrsim 10^6$). These devices show typical quasiparticle lifetimes of $\\tau_{qp} \\approx 30$--$40~\\mu$s and spectral resolution, $R = \\lambda / \\Delta \\lambda$, of 8 at 406.6~nm. We compare PtSi MKIDs to those fabricated with TiN and detail the substantial advanta...

  14. Monofunctional and Higher-Valent Platinum Anticancer Agents

    Science.gov (United States)

    Johnstone, Timothy C.; Wilson, Justin J.

    2013-01-01

    Platinum compounds represent one of the great success stories of metals in medicine. Following the serendipitous discovery of the anticancer activity of cisplatin by Rosenberg, a large number of cisplatin variants have been prepared and tested for their ability to kill cancer cells and inhibit tumor growth. These efforts continue today with increased realization that new strategies are needed to overcome issues of toxicity and resistance inherent to treatment by the approved platinum anticancer agents. One approach has been the use of so-called “non-traditional” platinum(II) and platinum(IV) compounds that violate the structure-activity relationships that governed platinum drug-development research for many years. Another is the use of specialized drug delivery strategies. Here we describe recent developments from our laboratory involving monofunctional platinum(II) complexes together with an historical account of the manner by which we came to investigate these compounds and their relationship to previously studied molecules. We also discuss work carried out using platinum(IV) prodrugs and the development of nanoconstructs designed to deliver them in vivo. PMID:23738524

  15. Surface Analysis of 4-Aminothiophenol Adsorption at Polycrystalline Platinum Electrodes

    Science.gov (United States)

    Rosario-Castro, Belinda I.; Fachini, Estevao R.; Contes, Enid J.; Perez-Davis, Marla E.; Cabrera, Carlos R.

    2008-01-01

    Formation of self-assembled monolayer (SAM) of 4-aminothiophenol (4-ATP) on polycrystalline platinum electrodes has been studied by surface analysis and electrochemistry techniques. The 4-ATP monolayer was characterized by cyclic voltammetry (CV), Raman spectroscopy, reflection absorption infrared (RAIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry (CV) experiments give an idea about the packing quality of the monolayer. RAIR and Raman spectra for 4-ATP modified platinum electrodes showed the characteristic adsorption bands for neat 4-ATP indicating the adsorption of 4-ATP molecules on platinum surface. The adsorption on platinum was also evidenced by the presence of sulfur and nitrogen peaks by XPS survey spectra of the modified platinum electrodes. High resolution XPS studies and RAIR spectrum for platinum electrodes modified with 4-ATP indicate that molecules are sulfur-bonded to the platinum surface. The formation of S-Pt bond suggests that ATP adsorption gives up an amino terminated SAM. Thickness of the monolayer was evaluated via angle-resolved XPS (AR-XPS) analyses. Derivatization of 4-ATP SAM was performed using 16-Br hexadecanoic acid.

  16. Modeling the cathode in a proton exchange membrane fuel cell using density functional theory How the carbon support can affect durability and activity of a platinum catalyst

    Science.gov (United States)

    Groves, Michael Nelson

    The current global energy and environmental challenges need to be addressed by developing a new portfolio of clean power producing devices. The proton exchange membrane fuel cell has the potential to be included and can fit into a variety of niches ranging from portable electronics to stationary residential applications. One of the many barriers to commercial viability is the cost of the cathode layer which requires too much platinum metal to achieve a comparable power output as well as would need to be replaced more frequently when compared to conventional sources for most applications. Using density functional theory, an ab initio modeling technique, these durability and activity issues are examined for platinum catalysts on graphene and carbon nanotube supports. The carbon supports were also doped by replacing individual carbon atoms with other second row elements (beryllium, boron, nitrogen, and oxygen) and the effect on the platinum-surface interaction along with the interaction between the platinum and the oxygen reduction reaction intermediates are discussed. Keywords: proton exchange membrane fuel cell, density functional theory, platinum catalyst, oxygen reduction reaction, doped carbon surfaces

  17. Mild in situ growth of platinum nanoparticles on multiwalled carbon nanotube-poly (vinyl alcohol) hydrogel electrode for glucose electrochemical oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shumin; Zheng, Yudong, E-mail: zhengyudong@mater.ustb.edu.cn; Qiao, Kun [University of Science and Technology Beijing, School of Material Science and Engineering (China); Su, Lei [University of Science and Technology Beijing, School of Chemistry and Biological Engineering (China); Sanghera, Amendeep; Song, Wenhui [University College London, UCL Centre for Nanotechnology & Regenerative Medicine, Division of Surgery and Interventional Science (United Kingdom); Yue, Lina; Sun, Yi [University of Science and Technology Beijing, School of Material Science and Engineering (China)

    2015-12-15

    This investigation describes an effective strategy to fabricate an electrochemically active hybrid hydrogel made from platinum nanoparticles that are highly dense, uniformly dispersed, and tightly embedded throughout the conducting hydrogel network for the electrochemical oxidation of glucose. A suspension of multiwalled carbon nanotubes and polyvinyl alcohol aqueous was coated on glassy carbon electrode by electrophoretic deposition and then physically crosslinked to form a three-dimensional porous conductive hydrogel network by a process of freezing and thawing. The network offered 3D interconnected mass-transport channels (around 200 nm) and confined nanotemplates for in situ growth of uniform platinum nanoparticles via the moderate reduction agent, ascorbic acid. The resulting hybrid hydrogel electrode membrane demonstrates an effective method for loading platinum nanoparticles on multiwalled carbon nanotubes by the electrostatic adsorption between multiwalled carbon nanotubes and platinum ions within porous hydrogel network. The average diameter of platinum nanoparticles is 37 ± 14 nm, which is less than the particle size by only using the moderate reduction agent. The hybrid hydrogel electrode membrane-coated glassy carbon electrode showed excellent electrocatalytic activity and good long-term stability toward glucose electrochemical oxidation. The glucose oxidation current exhibited a linear relationship with the concentration of glucose in the presence of chloride ions, promising for potential applications of implantable biofuel cells, biosensors, and electronic devices.

  18. Cisplatin and platinum drugs at the molecular level. (Review).

    Science.gov (United States)

    Boulikas, Teni; Vougiouka, Maria

    2003-01-01

    Over twenty years of intensive work toward improvement of cisplatin, and with hundreds of platinum drugs tested, has resulted in the introduction of the widely used carboplatin and of oxaliplatin used only for a very narrow spectrum of cancers. A number of interesting platinum compounds including the orally administered platinum drug JM216, nedaplatin, the sterically hindered platinum(II) complex ZD0473, the trinuclear platinum complex BBR3464, and the liposomal forms Lipoplatin and SPI-77 are under clinical evaluation. This review summarizes the molecular mechanisms of platinum compounds for DNA damage, DNA repair and induction of apoptosis via activation or modulation of signaling pathways and explores the basis of platinum resistance. Cisplatin, carboplatin, oxaliplatin and most other platinum compounds induce damage to tumors via induction of apoptosis; this is mediated by activation of signal transduction leading to the death receptor mechanisms as well as mitochondrial pathways. Apoptosis is responsible for the characteristic nephrotoxicity, ototoxicity and most other toxicities of the drugs. The major limitation in the clinical applications of cisplatin has been the development of cisplatin resistance by tumors. Mechanisms explaining cisplatin resistance include the reduction in cisplatin accumulation inside cancer cells because of barriers across the cell membrane, the faster repair of cisplatin adducts, the modulation of apoptotic pathways in various cells, the upregulation in transcription factors, the loss of p53 and other protein functions and a higher concentration of glutathione and metallothioneins in some type of tumors. A number of experimental strategies to overcome cisplatin resistance are at the preclinical or clinical level such as introduction of the bax gene, inhibition of the JNK pathway, introduction of a functional p53 gene, treatment of tumors with aldose reductase inhibitors and others. Particularly important are combinations of platinum

  19. Small Molecule Organic Optoelectronic Devices

    Science.gov (United States)

    Bakken, Nathan

    Organic optoelectronics include a class of devices synthesized from carbon containing 'small molecule' thin films without long range order crystalline or polymer structure. Novel properties such as low modulus and flexibility as well as excellent device performance such as photon emission approaching 100% internal quantum efficiency have accelerated research in this area substantially. While optoelectronic organic light emitting devices have already realized commercial application, challenges to obtain extended lifetime for the high energy visible spectrum and the ability to reproduce natural white light with a simple architecture have limited the value of this technology for some display and lighting applications. In this research, novel materials discovered from a systematic analysis of empirical device data are shown to produce high quality white light through combination of monomer and excimer emission from a single molecule: platinum(II) bis(methyl-imidazolyl)toluene chloride (Pt-17). Illumination quality achieved Commission Internationale de L'Eclairage (CIE) chromaticity coordinates (x = 0.31, y = 0.38) and color rendering index (CRI) > 75. Further optimization of a device containing Pt-17 resulted in a maximum forward viewing power efficiency of 37.8 lm/W on a plain glass substrate. In addition, accelerated aging tests suggest high energy blue emission from a halogen-free cyclometalated platinum complex could demonstrate degradation rates comparable to known stable emitters. Finally, a buckling based metrology is applied to characterize the mechanical properties of small molecule organic thin films towards understanding the deposition kinetics responsible for an elastic modulus that is both temperature and thickness dependent. These results could contribute to the viability of organic electronic technology in potentially flexible display and lighting applications. The results also provide insight to organic film growth kinetics responsible for optical

  20. Bio-inspired routes for synthesizing efficient nanoscale platinum electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Jennifer N. [Univ. of California, San Diego, CA (United States); Wang, Joseph [Univ. of California, San Diego, CA (United States)

    2014-08-31

    The overall objective of the proposed research is to use fundamental advances in bionanotechnology to design powerful platinum nanocrystal electrocatalysts for fuel cell applications. The new economically-viable, environmentally-friendly, bottom-up biochemical synthetic strategy will produce platinum nanocrystals with tailored size, shape and crystal orientation, hence leading to a maximum electrochemical reactivity. There are five specific aims to the proposed bio-inspired strategy for synthesizing efficient electrocatalytic platinum nanocrystals: (1) isolate peptides that both selectively bind particular crystal faces of platinum and promote the nucleation and growth of particular nanocrystal morphologies, (2) pattern nanoscale 2-dimensional arrays of platinum nucleating peptides from DNA scaffolds, (3) investigate the combined use of substrate patterned peptides and soluble peptides on nanocrystal morphology and growth (4) synthesize platinum crystals on planar and large-area carbon electrode supports, and (5) perform detailed characterization of the electrocatalytic behavior as a function of catalyst size, shape and morphology. Project Description and Impact: This bio-inspired collaborative research effort will address key challenges in designing powerful electrocatalysts for fuel cell applications by employing nucleic acid scaffolds in combination with peptides to perform specific, environmentally-friendly, simultaneous bottom-up biochemical synthesis and patterned assembly of highly uniform and efficient platinum nanocrystal catalysts. Bulk synthesis of nanoparticles usually produces a range of sizes, accessible catalytic sites, crystal morphologies, and orientations, all of which lead to inconsistent catalytic activities. In contrast, biological systems routinely demonstrate exquisite control over inorganic syntheses at neutral pH and ambient temperature and pressures. Because the orientation and arrangement of the templating biomolecules can be precisely

  1. The RSC Faraday prize lecture of 1989 on platinum.

    Science.gov (United States)

    Thomas, John Meurig

    2017-08-25

    In 1861, Michael Faraday gave one of his last Friday Evening Discourses at the Royal Institution of Great Britain, London, on platinum, which he described as "this beautiful, magnificent and valuable metal". More than a hundred and twenty years later (in 1989), the author re-enacted, at the Royal Institution, many of the demonstrations that Faraday carried out in his memorable Discourse. This article outlines many of Faraday's views on, and experiments with, platinum. It also describes the continuing importance and utilization of platinum, both as perceived in 1989 and from present perspectives.

  2. New Perfluorophtalate Complexes of Platinum(II) With Chemotherapeutic Potential

    OpenAIRE

    de Oliveira, M. B.; J. Miller; Banks, R. E.; Kelland, L R; McAuliffe, C. A.; Mahmood, N; Rowland, I. J.

    1996-01-01

    Two new platinum(II) complexes have been synthesized and their anti-tumour and anti-HIV activities have been evaluated. The new complexes are: (i) cis-tetrafluorophthalate-ammine-morpholine-platinum(II) or MMF3 and (ii) cis-tetrafluorophthalate- ammine-piperidine-platinum(II) or MPF4. They were characterized by elemental analysis, IR spectra and 1H and 13C NMR spectra. They were tested against five human ovarian carcinoma cell lines, viz., CH1, CH1cisR, A2780, A2780cisR and SKOV-3. They were ...

  3. Study of supported platinum catalysts by anomalous scattering

    Energy Technology Data Exchange (ETDEWEB)

    Georgopoulos, P.; Cohen, J.B.

    1985-01-01

    Platinum metal catalysts supported on silica gel and alumina were examined by wide-angle anomalous x-ray scattering at the Cornell High Energy Synchrotron Source. Complete removal of the support background features is achieved by this method, eliminating errors due to inaccurate background estimation. Platinum diffraction patterns from very-high-percentage metal-exposed catalysts were obtained for the first time, as well as from platinum supported on alumina. This technique is suitable for examining catalysts under working conditions and is superior to EXAFS for determinations of particle morphology and size distribution. 10 references, 8 figures.

  4. Interaction of novel bis(platinum) complexes with DNA.

    OpenAIRE

    Roberts, J D; Van Houten, B; Qu, Y; Farrell, N P

    1989-01-01

    Bis(platinum) complexes [[cis-PtCl2(NH3)]2H2N(CH2)nNH2] are a novel series of potential anticancer agents in which two cis-diamine(platinum) groups are linked by an alkyldiamine of variable length. These complexes are potentially tetrafunctional, a unique feature in comparison with known anticancer agents. Studies of DNA interactions of bis(platinum) complexes in comparison with cisplatin demonstrate significant differences. Investigations of interstrand crosslink formation in which crosslink...

  5. Platinum(II) and platinum(IV) complexes stabilized by abnormal/mesoionic C4-bound dicarbenes.

    Science.gov (United States)

    Khlebnikov, Vsevolod; Heckenroth, Marion; Müller-Bunz, Helge; Albrecht, Martin

    2013-03-28

    Platinum(II) complexes comprising abnormal diimidazolylidene ligands were synthesized from cis-PtMe(2)(DMSO)(2) using microwave-assisted double C-H bond activation. NMR analysis revealed an unusual solvolysis process, induced by coordinating solvents such as DMSO and MeCN, which has not been observed in related normal dicarbene complexes. NMR and IR spectroscopy and crystallographic analysis of the mono-substituted DMSO complex indicate a sulfur-bonding of the DMSO ligand to the platinum(II) center. Analysis of the DMSO exchange kinetics provided for the first time a quantitative measure of the trans effect of abnormal carbene ligands. The kinetic exchange rate in these bidentate abnormal dicarbene complexes is 0.050(±2) s(-1) and thus similar to analogous platinum(II) complexes containing phenylpyridine, yet significantly slower than that induced by pyridylidene pyridine. Reaction of the dicarbene platinum(II) complexes with PhICl(2), Br(2) and I(2) afforded the corresponding platinum(IV) complexes. Linkage isomerism of the Pt(IV)-bound DMSO was observed when the bromination reaction was performed in DMSO solution. Moreover, solvolysis was less pronounced in the platinum(IV) complexes than in the corresponding platinum(II) analogues.

  6. E platinum, a newly synthesized platinum compound, induces apoptosis through ROS-triggered ER stress in gastric carcinoma cells.

    Science.gov (United States)

    Wang, Xiaoping; Guo, Qinglong; Tao, Lei; Zhao, Li; Chen, Yan; An, Teng; Chen, Zhen; Fu, Rong

    2017-01-01

    Gastric cancer (GC) is still one of the leading causes of death in cancer-related diseases. In this study, we aimed to investigate the antitumor effect of E Platinum, a newly platinum-based chemotherapeutic agent bearing the basic structure of Oxaliplatin, in a variety of gastric carcinoma cells and the underlying mechanisms. We demonstrated that E Platinum significantly induced apoptosis in gastric cancer cells via mitochondrial apoptotic pathway as a result of increased reactive oxygen species (ROS). We also found that E Platinum enhanced Ca(2+) flux out from the endoplasmic reticulum by increasing the protein expression of IP3R type 1 (IP3R1) and decreasing the expression of ERp44. Dysfunction of Ca(2+) homeostasis in endoplasmic reticulum (ER) leads to accumulation of unfolded proteins and ER stress. Mechanically, E Platinum increased ER stress associated protein expression such as GRP78, p-PERK, p-eIF2α, ATF4, and CHOP. However, knocking down CHOP reversed E Platinum-induced apoptosis by blocking mitochondrial apoptotic pathway. Furthermore, 10 mg/kg of E Platinum significantly suppressed BGC-823 tumor growth in vivo without toxicity, which correlated with induction of apoptosis and expression of ER stress related proteins in tumor tissues. Taken together, E Platinum inhibited tumor growth and induced apoptosis by ROS-mediated ER stress activation both in vitro and in vivo. Our study indicated that E Platinum may be a potential and effective treatment for gastric cancer in clinical. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  7. Electrooxidation of saccharides at platinum electrode

    Science.gov (United States)

    Han, Ji-Hyung; Chung, Taek Dong

    2012-10-01

    Saccharides have been emerging as promising fuels for future energy industry because they possess high energy density and tremendous amount of them can be obtained from abundant biomass. Direct electrochemical oxidation of saccharides to generate electricity is a potentially competitive approach in terms of the demand for small, handy, and cost-effective electric power sources. To develop efficient sugar fuel cell, it is necessary to understand mechanism of electrooxidation of saccharide at electrode surface. Although glucose oxidation at platinum surface has been well known, fundamental mechanism study on electrooxidation of other sugars is still in its infancy. Based on research of glucose oxidation, we will predict the electrooxidation of other saccharides such as fructose.

  8. Thermodynamic ground states of platinum metal nitrides

    Energy Technology Data Exchange (ETDEWEB)

    Aberg, D; Sadigh, B; Crowhurst, J; Goncharov, A

    2007-10-09

    We have systematically studied the thermodynamic stabilities of various phases of the nitrides of the platinum metal elements using density functional theory. We show that for the nitrides of Rh, Pd, Ir and Pt two new crystal structures, in which the metal ions occupy simple tetragonal lattice sites, have lower formation enthalpies at ambient conditions than any previously proposed structures. The region of stability can extend up to 17 GPa for PtN{sub 2}. Furthermore, we show that according to calculations using the local density approximation, these new compounds are also thermodynamically stable at ambient pressure and thus may be the ground state phases for these materials. We further discuss the fact that the local density and generalized gradient approximations predict different values of the absolute formation enthalpies as well different relative stabilities between simple tetragonal and the pyrite or marcasite structures.

  9. Fabrication of iron-platinum ferromagnetic nanoparticles

    Science.gov (United States)

    Elkins, Kevin Eugene

    Fabrication of chemically disordered FePt particles ranging from 2--9 nm with a precision of 1 nm has been achieved through modification of key process variables including surfactant concentration, heating rates and the type of iron precursor. In addition, the shape evolution of the FePt nanoparticles during particle growth can be manipulated to give cubic or rod geometries through changes to the surfactant injection sequence and solvent system. The primary method for synthesis of the disordered FePt nanoparticles is the polyol reduction reported by Fievet et al., which has been modified and used extensively for synthesis of differing nanoparticle systems. Our procedures use platinum acetylacetonate, iron pentacarbonyl or ferric acetylacetonate as precursors for the FePt alloy, oleic acid and oleyl amine for the surfactants, 1,2-hexadecanediol to assist with the reduction of the precursors and either dioctyl ether or phenyl ether for the solvent system. For iron pentacarbonyl based reactions, adjustment of heating rates to reflux temperatures from 1--15°C per minute allows control of FePt particle diameters from 3--8 nm. Substitution of iron pentacarbonyl with ferric acetylacetonate as the iron source results in 2 nm particles. A high platinum to surfactant ratio of 10 to 1 will yield 9 nm FePt particles when iron pentacarbonyl is used as the precursor. For use of these particles in advanced applications, the synthesized particles must be transformed to the L1o phase through annealing at temperatures above 500°C. Inhibition of particle sintering can be avoided through dispersion in a NaCl matrix at a weight ratio of 400 to 1 salt to fcc FePt particles. Production of L1o FePt nanoparticles with high magnetic anisotropy with this process has been successful, allowing the original size and size distribution of the particles.

  10. Synthesis and Characterization of Phenothiazine-Based Platinum(II)-Acetylide Photosensitizers for Efficient Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Siu, Chi-Ho; Lee, Lawrence Tien Lin; Yiu, Sze-Chun; Ho, Po-Yu; Zhou, Panwang; Ho, Cheuk-Lam; Chen, Tao; Liu, Jianyong; Han, Keli; Wong, Wai-Yeung

    2016-03-07

    Three new unsymmetrical phenothiazine-based platinum(II) bis(acetylide) complexes PT1-PT3 with different electron-donating arylacetylide ligands were synthesized and characterized. Their photophysical, electrochemical, and photovoltaic properties have been fully investigated and the density functional theory (DFT) calculations have been carried out. Under AM 1.5 irradiation (100 mW cm(-2)), the PT1-based dye-sensitized solar cell (DSSC) device exhibited an attractive power conversion efficiency (η) up to 5.78 %, with a short-circuit photocurrent density (J(sc)) of 10.98 mA cm(-2), an open-circuit photovoltage (V(oc)) of 0.738 V, and a fill factor (ff) of 0.713. These findings provide strong evidence that platinum-acetylide complexes have great potential as promising photosensitizers in DSSC applications.

  11. Platinum-Catalyzed Selective Tin-Carbon Bond Formation

    NARCIS (Netherlands)

    Thoonen, Sander Hendrikus Lambertus

    2003-01-01

    In conclusion, two improved methods for the selective synthesis of monoorganotin trihalides were developed. The platinum-catalyzed Kocheshkov redistribution reaction of dialkyltin dichlorides with tin tetrachloride is the most interesting. Contrary to the other two methods described (the direct

  12. Wireless gas sensing in South African underground platinum mines

    CSIR Research Space (South Africa)

    Abu-Mahfouz, Adnan M

    2014-04-01

    Full Text Available Approximately 70% of South African mines are classified as fiery, where methane gas potentially could cause explosions. The number of flammable gas reports and accidents are increasing steadily for both gold and platinum mines. However...

  13. Safety profile of Colgate Platinum Professional Toothwhitening System.

    Science.gov (United States)

    Adam-Rodwell, G; Kong, B M; Bagley, D M; Tonucci, D; Christina, L M

    1994-01-01

    Colgate Platinum, a professional tooth-whitening paste containing 10% urea peroxide as the active ingredient, was evaluated for potential acute oral toxicity, genotoxicity, and irritation to oral mucosa. Oral administration to rats of a single dose of 5 g/kg of Colgate Platinum did not induce any adverse effects. Colgate Platinum was not mutagenic in Ames/Salmonella Plate Incorporation assay and did not induce primary DNA damage in the bone marrow hematopoietic cells of rats that were given oral doses of up to 1 g/kg for 5 consecutive days. Results of the oral mucosa irritation study in rats indicated that Colgate Platinum did not induce damage to soft and hard tissues of oral cavity after repeated applications for 28 days. Collectively, the data from these studies document the safety of the product for the intended use.

  14. Resolving the Structure of Active Sites on Platinum Catalytic Nanoparticles

    DEFF Research Database (Denmark)

    Chang, Lan Yun; Barnard, Amanda S.; Gontard, Lionel Cervera

    2010-01-01

    Accurate understanding of the structure of active sites is fundamentally important in predicting catalytic properties of heterogeneous nanocatalysts. We present an accurate determination of both experimental and theoretical atomic structures of surface monatomic steps on industrial platinum nanop...

  15. Defining Therapy for Recurrent Platinum-sensitive Ovarian Cancer

    Science.gov (United States)

    In this phase III clinical trial, women with platinum-sensitive, recurrent ovarian epithelial, fallopian tube, or primary peritoneal cancer will be randomly assigned to undergo secondary cytoreductive surgery, if they are candidates for such surgery, and

  16. Platinum single crystal electrodes for the electrocatalysis of methane oxidation

    Directory of Open Access Journals (Sweden)

    Mayara Munaretto

    2011-03-01

    Full Text Available The main objective of this paper is to characterize the voltammetric profiles of platinum single crystals of low Miller indexes Pt(100 and Pt(110 and study their catalytic activities on the oxidation of methane. In this way, it was developed a metallic surface modified by presence of other metal oxide, which presents catalytic activity for this reaction. It is well known that the electrooxidation of methane (CH4 leads mainly to the formation of CO2 and H2O, however, the oxidation can also lead to the formation of CO, a reaction intermediate that has strong interaction with metal surfaces, such as platinum. This molecule tends to accumulate on the platinum surface and to passive it, due to the self-poisoning, decreasing its catalytic activity. Therefore, the main aim of this work was the development of a platinum electrode modified by deposition of titanium oxide, which presented electrocatalytic properties for the oxidation of methane.

  17. Platinum blue staining of cells grown in electrospun scaffolds.

    Science.gov (United States)

    Yusuf, Mohammed; Millas, Ana Luiza G; Estandarte, Ana Katrina C; Bhella, Gurdeep K; McKean, Robert; Bittencourt, Edison; Robinson, Ian K

    2014-01-01

    Fibroblast cells grown in electrospun polymer scaffolds were stained with platinum blue, a heavy metal stain, and imaged using scanning electron microscopy. Good contrast on the cells was achieved compared with samples that were gold sputter coated. The cell morphology could be clearly observed, and the cells could be distinguished from the scaffold fibers. Here we optimized the required concentration of platinum blue for imaging cells grown in scaffolds and show that a higher concentration causes platinum aggregation. Overall, platinum blue is a useful stain for imaging cells because of its enhanced contrast using scanning electron microscopy (SEM). In the future it would be useful to investigate cell growth and morphology using three-dimensional imaging methods.

  18. Internalization of Ineffective Platinum Complex in Nanocapsules Renders It Cytotoxic.

    Science.gov (United States)

    Vrana, Oldrich; Novohradsky, Vojtech; Medrikova, Zdenka; Burdikova, Jana; Stuchlikova, Olga; Kasparkova, Jana; Brabec, Viktor

    2016-02-18

    Anticancer therapy by platinum complexes, based on nanocarrier-based delivery, may offer a new approach to improve the efficacy and tolerability of the platinum family of anticancer drugs. The original rules for the design of new anticancer platinum drugs were affected by the fact that, although cisplatin (cis-[PtCl2 (NH3)2) was an anticancer drug, its isomer transplatin was not cytotoxic. For the first time, it is demonstrated that simple encapsulation of an inactive platinum compound in phospholipid bilayers transforms it into an efficient cytotoxic agent. Notably, the encapsulation of transplatin makes it possible to overcome the resistance mechanisms operating in cancer cells treated with cisplatin and prevents inactivation of transplatin in the extracellular environment. It is also shown that transplatin delivered to the cells in nanocapsules, in contrast to free (nonencapsulated) complex, forms cytotoxic cross-links on DNA.

  19. Platinum electrodeposition from a dinitrosulfatoplatinate(II) electrolyte

    Science.gov (United States)

    Weiser, Mathias; Schulze, Claudia; Schneider, Michael; Michaelis, Alexander

    2016-12-01

    In this work a halogen-free electrolyte to deposit platinum nanoparticle is studied. The investigated [Pt(NO2)2SO4]2--complex is suitable for electrochemical deposition on halogen sensitive substrates. The mechanism and kinetic of particle deposition is investigated using a glassy carbon rotating disk electrode. Nano sized platinum particles are deposited by using pulse plating technique. The size of the smallest platinum nanoparticle is 5 nm. The shape of the particle distribution strictly depends on the plating time. The platinum deposition is usually superimposed with hydrogen evolution. A diffusion coefficient of the [Pt(NO2)2SO4]2--complex is determined to 5.4 × 10-6 cm2s-1. The current efficiency depends on the deposition parameters and amounts to 37% under the chosen pulse plating conditions.

  20. Interfacial electronic effects control the reaction selectivity of platinum catalysts

    Science.gov (United States)

    Chen, Guangxu; Xu, Chaofa; Huang, Xiaoqing; Ye, Jinyu; Gu, Lin; Li, Gang; Tang, Zichao; Wu, Binghui; Yang, Huayan; Zhao, Zipeng; Zhou, Zhiyou; Fu, Gang; Zheng, Nanfeng

    2016-05-01

    Tuning the electronic structure of heterogeneous metal catalysts has emerged as an effective strategy to optimize their catalytic activities. By preparing ethylenediamine-coated ultrathin platinum nanowires as a model catalyst, here we demonstrate an interfacial electronic effect induced by simple organic modifications to control the selectivity of metal nanocatalysts during catalytic hydrogenation. This we apply to produce thermodynamically unfavourable but industrially important compounds, with ultrathin platinum nanowires exhibiting an unexpectedly high selectivity for the production of N-hydroxylanilines, through the partial hydrogenation of nitroaromatics. Mechanistic studies reveal that the electron donation from ethylenediamine makes the surface of platinum nanowires highly electron rich. During catalysis, such an interfacial electronic effect makes the catalytic surface favour the adsorption of electron-deficient reactants over electron-rich substrates (that is, N-hydroxylanilines), thus preventing full hydrogenation. More importantly, this interfacial electronic effect, achieved through simple organic modifications, may now be used for the optimization of commercial platinum catalysts.

  1. Platinum group metal nitrides and carbides: synthesis, properties and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Ivanovskii, Alexander L [Institute of Solid State Chemistry, Urals Branch of the Russian Academy of Sciences, Ekaterinburg (Russian Federation)

    2009-04-30

    Experimental and theoretical data on new compounds, nitrides and carbides of the platinum group 4d and 5d metals (ruthenium, rhodium, palladium, osmium, iridium, platinum), published over the past five years are summarized. The extreme mechanical properties of platinoid nitrides and carbides, i.e., their high strength and low compressibility, are noted. The prospects of further studies and the scope of application of these compounds are discussed.

  2. Problems and Characteristics of Russian Platinum Metals Exporters

    Institute of Scientific and Technical Information of China (English)

    ANDREEV A. M.; KELCHEVSKAYA N. R.

    2012-01-01

    The paper revealed the place and role of Russia in the global market of platinum metals,highlighted features of pricing in the export of Russian platinum group metals,the main problems of pricing in the export contracts related to the instability of markets and imperfect currency and customs legislation of the Russian Federation,proposed innovative ways to solutions to existing problems in the preparation and conclusion of export contracts.

  3. CROWN FUNCTIONALIZED LINEAR POLYSILOXANE PLATINUM COMPLEX AS HYDROSILYLATION CATALYST

    Institute of Scientific and Technical Information of China (English)

    CHEN Yuanyin; LU Xueran; GONG Shuling; ZHANG Baolian

    1994-01-01

    A modified method of preparing crown functionalized linear polysiloxane has been described.4'-allylbenzo-15-crown-5 was subjected to hydrosilylation with methyldichlorosilane,followed by polycondensation with silanol-terminated polydimethylsiloxane to give the title crown functionalized linear polysiloxane. It was found that the polysiloxane could be coordinated with platinum salt to form platinum complex, which could catalyze the hydrosilylation of olefins with triethoxysilane efficiently.

  4. Mineral resource of the month: platinum group metals

    Science.gov (United States)

    Loferski, Patricia J.

    2010-01-01

    The article focuses on platinum group metals (PGMs) and their properties. According to the author, PGMs, which include iridium, osmium, palladium, platinum, rhodium, and ruthenium, are among the rarest mineral commodities in the Earth's crust. PGMs are primarily used as catalytic converters that clean harmful exhaust from vehicle engines. They are also used in the chemical industry as catalysts in the production of nitric acid and in the petroleum refining industry.

  5. Synthesis of nanosized platinum based catalyst using sol-gel process

    Science.gov (United States)

    Ingale, S. V.; Wagh, P. B.; Bandyopadhyay, D.; Singh, I. K.; Tewari, R.; Gupta, S. C.

    2015-02-01

    The nano-sized platinum based catalysts using high surface area silica support have been prepared by sol-gel method. Tetramethoxysilane (TMOS) diluted in methanol was hydrolyzed to form a porous silica gel. Platinum (2%) was loaded at sol state using platinum chloride solution. After gelation, the solvent from the gel pores was extracted at ambient temperature which resulted in porous silica matrix incorporated with nanosized platinum. X-ray diffraction studies indicated the presence of elemental platinum in the silica-platinum composites. Transmission electron microscopy of the platinum -silica composites revealed that nanosized platinum particles of about 5-10 nm are homogeneously dispersed in silica matrix. Chemisorptions studies showed high dispersion (more than 50%) of platinum on silica support with specific surface area of 400 m2/g which puts them as promising candidates as catalyst in heterogeneous reactions.

  6. Platinum drugs and DNA repair mechanisms in lung cancer.

    Science.gov (United States)

    Bonanno, Laura; Favaretto, Adolfo; Rosell, Rafael

    2014-01-01

    The standard first-line treatment for around 80% of newly-diagnosed advanced non-small cell lung cancer (NSCLC) is chemotherapy. Currently, patients are allocated to chemotherapy on the basis of clinical conditions, comorbidities and histology. If feasible, platinum-based chemotherapy is considered as the most efficacious option. Due to the heterogeneity in terms of platinum-sensitivity among patients with NSCLC, great efforts have been made in order to identify molecular predictive markers of platinum resistance. Based on the mechanism of action of platinum, several components of DNA repair pathways have been investigated as potential predictive markers. The main DNA repair pathways involved in the repair of platinum-induced DNA damage are nucleotide excision repair and homologous recombination. The most studied potential predictive markers of platinum-sensitivity are Excision Repair Cross Complementing-1 (ERCC1) and Brest Cancer Type-I Susceptibility protein (BRCA1); however, increasing biological knowledge about DNA repair pathways suggests the potential clinical usefulness of integrated analysis of multiple DNA repair components.

  7. Liposomes, a promising strategy for clinical application of platinum derivatives.

    Science.gov (United States)

    Zalba, Sara; Garrido, María J

    2013-06-01

    Liposomes represent a versatile system for drug delivery in various pathologies. Platinum derivatives have been demonstrated to have therapeutic efficacy against several solid tumors. But their use is limited due to their side effects. Since liposomal formulations are known to reduce the toxicity of some conventional chemotherapeutic drugs, the encapsulation of platinum derivatives in these systems may be useful in reducing toxicity and maintaining an adequate therapeutic response. This review describes the strategies applied to platinum derivatives in order to improve their therapeutic activity, while reducing the incidence of side effects. It also reviews the results found in the literature for the different platinum-drugs liposomal formulations and their current status. The design of liposomes to achieve effectiveness in antitumor treatment is a goal for platinum derivatives. Liposomes can change the pharmacokinetic parameters of these encapsulated drugs, reducing their side effects. However, few liposomal formulations have demonstrated a significant advantage in therapeutic terms. Lipoplatin, a cisplatin formulation in Phase III, combines a reduction in the toxicity associated with an antitumor activity similar to the free drug. Thermosensitive or targeted liposomes for tumor therapy are also included in this review. Few articles about this strategy applied to platinum drugs can be found in the literature.

  8. In vitro permeation of platinum and rhodium through Caucasian skin.

    Science.gov (United States)

    Franken, A; Eloff, F C; Du Plessis, J; Badenhorst, C J; Jordaan, A; Du Plessis, J L

    2014-12-01

    During platinum group metals (PGMs) refining the possibility exists for dermal exposure to PGM salts. The dermal route has been questioned as an alternative route of exposure that could contribute to employee sensitisation, even though literature has been focused on respiratory exposure. This study aimed to investigate the in vitro permeation of platinum and rhodium through intact Caucasian skin. A donor solution of 0.3mg/ml of metal, K2PtCl4 and RhCl3 respectively, was applied to the vertical Franz diffusion cells with full thickness abdominal skin. The receptor solution was removed at various intervals during the 24h experiment, and analysed with high resolution ICP-MS. Skin was digested and analysed by ICP-OES. Results indicated cumulative permeation with prolonged exposure, with a significantly higher mass of platinum permeating after 24h when compared to rhodium. The mass of platinum retained inside the skin and the flux of platinum across the skin was significantly higher than that of rhodium. Permeated and skin retained platinum and rhodium may therefore contribute to sensitisation and indicates a health risk associated with dermal exposure in the workplace.

  9. Platinum Inhibits Low-Temperature Dry Lean Methane Combustion through Palladium Reduction in Pd-Pt/Al2 O3 : An In Situ X-ray Absorption Study.

    Science.gov (United States)

    Nassiri, Hanieh; Lee, Kee-Eun; Hu, Yongfeng; Hayes, Robert E; Scott, Robert W J; Semagina, Natalia

    2017-01-18

    Palladium-platinum bimetallic catalysts supported on alumina with palladium/platinum molar ratios ranging from 0.25 to 4 are studied in dry lean methane combustion in the temperature range of 200 to 500 °C. Platinum addition decreases the catalyst activity, which cannot be explained by the decrease in dispersion or the structure sensitivity of the reaction. In situ X-ray absorption near-edge structure and extended X-ray absorption fine structure spectroscopy measurements have been conducted for monometallic Pd, Pt, and 2:1 Pd-Pt catalysts. Monometallic palladium is fully oxidized in the full temperature range, whereas platinum addition promotes palladium reduction, even in a reactive oxidizing environment. The Pd/PdO weight ratio in bimetallic Pd-Pt 2:1 catalysts decreases from 98/2 to 10/90 in the 200-500 °C temperature range under the reaction conditions. Thus, platinum promotes the formation of the reduced palladium phase with a significantly lower activity than that of oxidized palladium. The study sheds light on the effect of platinum on the state of the active palladium surface under low-temperature dry lean methane combustion conditions, which is important for methane-emission control devices. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Conjugated platinum(IV)-peptide complexes for targeting angiogenic tumor vasculature.

    Science.gov (United States)

    Mukhopadhyay, Sumitra; Barnés, Carmen M; Haskel, Ariel; Short, Sarah M; Barnes, Katie R; Lippard, Stephen J

    2008-01-01

    The integrins alpha vbeta3 and alpha vbeta5 and the membrane-spanning surface protein aminopeptidase N (APN) are highly expressed in tumor-induced angiogenesis, making them attractive targets for therapeutic intervention. Both integrins and APN recognize a broad range of peptides containing RGD (Arg-Gly-Asp) and NGR (Asn-Gly-Arg) motifs, respectively. Here, we describe the design, synthesis, and characterization of a series of mono- and difunctionalized platinum(IV) complexes in which a conjugated peptide motif, containing RGD, (CRGDC)c, (RGDfK)c, or NGR, is appended as a "tumor-homing device" to target tumor endothelial cells selectively over healthy cells. Platinum(IV)-peptide complexes with nonspecific amino acids or peptide moieties were prepared as controls. Concentration-response curves of these compounds were evaluated against primary proliferating endothelial cells and tumor cell lines and compared to those of cisplatin, a well-described platinum-based chemotherapeutic agent. The Pt(IV)-RGD conjugates were highly and specifically cytotoxic to cell lines containing alpha vbeta3 and alpha vbeta5, approaching the activity of cisplatin. The Pt(IV)-NGR complexes were less active than Pt(IV)-RGD-containing compounds but more active than nonspecific Pt-peptide controls. Integrin alpha vbeta3 mediated, at least in part, the anti-proliferative effect of a Pt(IV)-RGD conjugate, as demonstrated by a decreased inhibitory response when endothelial cells were either (1) incubated with an excess of alpha vbeta3/alpha vbeta5-specific RGD pentapeptides or (2) transfected with RNAi for beta 3, but not beta 1, integrins. These results suggest a rational approach to improved chemotherapy with Pt(IV)-peptide conjugates by selective drug delivery to the tumor compartment.

  11. Electrochemical characteristics of nanostructured platinum electrodes--a cyclic voltammetry study.

    Science.gov (United States)

    Daubinger, P; Kieninger, J; Unmüssig, T; Urban, G A

    2014-05-14

    Platinum surfaces play a decisive role in catalysis in sensors, fuel cells, solar cells and other applications like neuronal stimulation and recording. Technical advances in nanotechnology contributed tremendously to the progress in these fields. A fundamental understanding of the chemical and physical interactions between the nanostructured surfaces and electrolytes is essential, but was barely investigated up to now. In this article, we present a wet-chemical process for the deposition of nanostructures on polycrystalline platinum surfaces. The electrochemically active surface area was increased by a factor of over 1000 times with respect to the geometrical surface. The influence of the nanostructures was examined in different acidic, alkaline, and neutral electrolytes. Comparing cyclic voltammograms of nanostructured and planar polycrystalline platinum revealed new insights into the microenvironment at the electrode-electrolyte interface. The characteristic features of the cyclic voltammograms were altered in their shape and strongly shifted with respect to the applied potential. In neutral buffered and unbuffered electrolytes the water window was expanded from 1.4 V to more than 2 V. The shifts were interpreted as local pH-changes and exhausted buffer capacity in direct proximity of the electrode surface due to the strong release and binding of protons, respectively. These polarized electrodes induce significant changes in the electrochemical potential of the electrolyte due to the high roughness of their surface. The electrochemical phenomena and the observed voltage shifts are crucial for the understanding of the basic mechanism at nanostructured electrodes and mandatory for designing fuel cells, sensors and many other devices.

  12. Platinum- and platinum alloy-coated palladium and palladium alloy particles and uses thereof

    Science.gov (United States)

    Adzic, Radoslav; Zhang, Junliang; Mo, Yibo; Vukmirovic, Miomir Branko

    2010-04-06

    The present invention relates to particle and nanoparticle composites useful as oxygen-reduction electrocatalysts. The particle composites are composed of a palladium or palladium-alloy particle or nanoparticle substrate coated with an atomic submonolayer, monolayer, bilayer, or trilayer of zerovalent platinum atoms. The invention also relates to a catalyst and a fuel cell containing the particle or nanoparticle composites of the invention. The invention additionally includes methods for oxygen reduction and production of electrical energy by using the particle and nanoparticle composites of the invention.

  13. Clinical pharmacology and pharmacokinetics of cis-platinum and analogs.

    Science.gov (United States)

    Ribaud, P; Gouveia, J; Bonnay, M; Mathe, G

    1981-01-01

    cis-Platinum (DDP), the first metal coordination complex introduced into clinical trials, is remarkable for its therapeutic index. A short review of the numerator of this index, ie, the clinical activities of DDP given as a single agent or in combination therapy is presented. Toxicity of DDP, the denominator of the index, is given more attention, particularly nephrotoxicity, whose cumulative character and molecular mechanism are still in question and which can most often be prevented by following certain safety rules that are detailed in this paper. Pharmacokinetics data of free and filterable platinum are reviewed and discussed according to the different modalities of administration of DDP, and to what is known about its toxicity and its mechanism of cell kill. The rationale for using DDP in combination treatment is presented and the question of possible long-term toxicities is raised. cis-platinum analogs are sought for the purpose of enlarging the spectrum of activity, increasing selectivity and diminishing toxicity. Malonato-platinum has been shown not to be cross-resistant with DDP and to be clinically effective in adult acute leukemia. In a phase I study, malonato-platinum, which is poorly soluble, was administered in 6-24-hour infusions to 49 patients in doses ranging from 3 to 32 mg/kg. GI toxicity was universal. Hematological toxicity appeared to be mild and not clearly dose-related (the 3-32 mg/kg patients were not yet evaluable). Platinum pharmacokinetics in urine and plasma were performed using flameless absorption spectrophotometry. Preliminary results have suggested that malonato-platinum presented several pharmacokinetic features in common with DDP. Minor responses were seen in four solid tumor patients, three of whom were refractory to DDP. Other analogs soon to be introduced into clinical trials are listed.

  14. Platinum metals in magmatic sulfide ores

    Science.gov (United States)

    Naldrett, A.J.; Duke, J.M.

    1980-01-01

    Platinum-group elements (PGE) are mined predominantly from deposits that have formed by the segregation of molten iron-nickel-copper sulfides from silicate magmas. The absolute concentrations of PGE in sulfides from different deposits vary over a range of five orders of magnitude, whereas those of other chalcophile elements vary by factors of only 2 to 100. However, the relative proportions of the different PGE in a given deposit are systematically related to the nature of the parent magma. The absolute and relative concentrations of PGE in magmatic sulfides are explained in terms of the degree of partial melting of mantle peridotite required to produce the parent magma and the processes of batch equilibration and fractional segregation of sulfides. The Republic of South Africa and the U.S.S.R. together possess more than 97 percent of the world PGE reserves, but significant undeveloped resources occur in North America. The Stillwater complex in Montana is perhaps the most important example. Copyright ?? 1980 AAAS.

  15. Platinum states in citrate sols by EXAFS.

    Science.gov (United States)

    Lin, Chia-Shiang; Khan, Maksudur R; Lin, Shawn D

    2005-07-01

    Platinum sols have been prepared by citrate reduction in the temperature range of 343-363 K. The Pt state in the solution was examined by EXAFS (extended X-ray absorption fine-structure spectroscopy). It did not show any PtPt bonding, a characteristic for reduced Pt sols. EXAFS model fitting further proved the presence of PtO with 4 oxygen neighbors, which suggests a tetraplanar coordination configuration. The possibility of neighboring Pt sharing oxygen ligand or the formation of PtO(x) is rejected by EXAFS model fitting. Citrate was found to be the most likely ligand to orient its oxygen end toward a charged Pt center. Thus we have revealed that the citrate treatment at this temperature range was clearly insufficient to reduce H2PtCl(6(aq)). Neither an extended period of reaction time nor an excess citrate reduced the Pt precursor. It is therefore highly recommended that the citrate sols should be carefully prepared and used.

  16. Development of radioactive platinum group metal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.S.; Kim, Y.S.; Kim, Y.E. [and others

    1999-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metals such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solutions was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400m{sup 2}/g.The content of palladium impregnated on the support was 1 to 10 wt. %. Hydrogen isotope exchange efficiency of more than 93% to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its activity is unimportant as in nuclear industries. (author). 86 refs., 44 tabs., 88 figs.

  17. Development of radioactive platinum group metal catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H.S.; Kim, Y.S.; Kim, Y.E. [and others

    1999-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metals such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solutions was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400m{sup 2}/g.The content of palladium impregnated on the support was 1 to 10 wt. %. Hydrogen isotope exchange efficiency of more than 93% to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its activity is unimportant as in nuclear industries. (author). 86 refs., 44 tabs., 88 figs.

  18. Clinical utility of platinum chromium bare-metal stents in coronary heart disease

    Directory of Open Access Journals (Sweden)

    Jorge C

    2015-08-01

    Full Text Available Claudia Jorge,1 Christophe Dubois1,2 1Department of Cardiovascular Medicine, University Hospitals Leuven, 2Department of Cardiovascular Sciences, Katholieke Universiteit Leuven, Leuven, Belgium Abstract: Coronary stents represent a key development for the treatment of obstructive coronary artery disease since the introduction of percutaneous coronary intervention. While drug-eluting stents gained wide acceptance in contemporary percutaneous coronary intervention practice, further developments in bare-metal stents remain crucial for patients who are not candidates for drug-eluting stents, or to improve metallic platforms for drug elution. Initially, stent platforms used biologically inert stainless steel, restricting stent performance due to limitations in flexibility and strut thickness. Later, cobalt chromium stent alloys outperformed steel as the material of choice for stents, allowing latest generation stents to be designed with significantly thinner struts, while maintaining corrosion resistance and radial strength. Most recently, the introduction of the platinum chromium alloy refined stent architecture with thin struts, high radial strength, conformability, and improved radiopacity. This review will provide an overview of the novel platinum chromium bare-metal stent platforms available for coronary intervention. Mechanical properties, clinical utility, and device limitations will be summarized and put into perspective. Keywords: bare metal stent, coronary stent alloys, coronary artery disease

  19. Mechanical polishing as an improved surface treatment for platinum screen-printed electrodes

    Directory of Open Access Journals (Sweden)

    Junqiao Lee

    2016-07-01

    Full Text Available The viability of mechanical polishing as a surface pre-treatment method for commercially available platinum screen-printed electrodes (SPEs was investigated and compared to a range of other pre-treatment methods (UV-Ozone treatment, soaking in N,N-dimethylformamide, soaking and anodizing in aqueous NaOH solution, and ultrasonication in tetrahydrofuran. Conventional electrochemical activation of platinum SPEs in 0.5 M H2SO4 solution was ineffective for the removal of contaminants found to be passivating the screen-printed surfaces. However, mechanical polishing showed a significant improvement in hydrogen adsorption and in electrochemically active surface areas (probed by two different redox couples due to the effective removal of surface contaminants. Results are also presented that suggest that SPEs are highly susceptible to degradation by strong acidic or caustic solutions, and could potentially lead to instability in long-term applications due to continual etching of the binding materials. The ability of SPEs to be polished effectively extends the reusability of these traditionally “single-use” devices.

  20. Synthesis and characterization of potential iron–platinum drugs and supplements by laser liquid photolysis

    CSIR Research Space (South Africa)

    Nkosi, SS

    2013-06-01

    Full Text Available , and structure was systematically investigated. Different nanostructures of iron–platinum alloy and chemically disordered iron–platinum L10 phase were obtained without annealing. The prepared precursor solution underwent deep photolysis to polycrystalline iron...

  1. A dual-emissive ionic liquid based on an anionic platinum(II) complex

    OpenAIRE

    Ogawa, Tomohiro; Yoshida, Masaki; Ohara, Hiroki; Kobayashia, Atsushi; Kato, Masako

    2015-01-01

    An ionic liquid fabricated froman anionic cyclometalated platinum(II) complex and an imidazolium cation exhibits dual emission from the monomeric and aggregated forms of the platinum complex anions, leading to temperature-dependent color changes of luminescence.

  2. A dual-emissive ionic liquid based on an anionic platinum(ii) complex.

    Science.gov (United States)

    Ogawa, Tomohiro; Yoshida, Masaki; Ohara, Hiroki; Kobayashi, Atsushi; Kato, Masako

    2015-09-07

    An ionic liquid fabricated from an anionic cyclometalated platinum(ii) complex and an imidazolium cation exhibits dual emission from the monomeric and aggregated forms of the platinum complex anions, leading to temperature-dependent color changes of luminescence.

  3. Pharmacokinetics of Malonato (1,2 diaminocyclohexane) platinum.

    Science.gov (United States)

    Kelsen, D P; Ribaud, P; Alcock, N; Burchenal, J H; Young, C W; Mathe, G

    1981-01-01

    Malonato-(1,2 diaminocyclohexane) platinum (MP) is a new platinum analog currently undergoing phase I clinical trials. Using flameless atomic absorption spectrophotometry, the pharmacokinetics of MP were studied at five dosage levels. The drug was given as a prolonged intravenous infusion, lasting from 6 to 24 hours. Peak plasma platinum concentrations (Pt) were seen at the end of the infusion, and ranged from 1.1 microgram/ml when 3 mg/kg was given to 14-20.5 micrograms/ml at the 24-mg/kg level. Following completion of the infusion, a prolonged T1/2 beta (mean 63.5 hours) was noted. The percentage of free:total platinum was high (90-95%) at the beginning of the infusion but fell rapidly, to only 15-21% at the end of the 24-hour infusions. Urinary excretion accounted for 16-37.5% of the total administered dose. MP appears to have several pharmacokinetic features in common with cisplatin: rapid binding to protein, a prolonged terminal phase half-life involving primarily bound platinum, and incomplete excretion by the kidney.

  4. Neurotoxicity Caused by the Treatment with Platinum Analogues

    Directory of Open Access Journals (Sweden)

    Sousana Amptoulach

    2011-01-01

    Full Text Available Platinum agents (cisplatin, carboplatin, and oxaliplatin are a class of chemotherapy agents that have a broad spectrum of activity against several solid tumors. Toxicity to the peripheral nervous system is the major dose-limiting toxicity of at least some of the platinum drugs of clinical interest. Among the platinum compounds in clinical use, cisplatin is the most neurotoxic, inducing mainly sensory neuropathy of the upper and lower extremities. Carboplatin is generally considered to be less neurotoxic than cisplatin, but it is associated with a higher risk of neurological dysfunction if administered at high dose or in combination with agents considered to be neurotoxic. Oxaliplatin induces two types of peripheral neuropathy, acute and chronic. The incidence of oxaliplatin-induced neuropathy is related to various risk factors such as treatment schedule, cumulative dose, and time of infusion. To date, several neuroprotective agents including thiol compounds, vitamin E, various anticonvulsants, calcium-magnesium infusions, and other nonpharmacological strategies have been tested for their ability to prevent platinum-induced neurotoxicity with controversial results. Further studies on the prevention and treatment of neurotoxicity of platinum analogues are warranted.

  5. Presentation and Diagnosis of Hypersensitivity to Platinum Drugs.

    Science.gov (United States)

    Caiado, Joana; Castells, Mariana

    2015-04-01

    Hypersensitivity reactions (HSRs) to platinum drugs are increasing due to their extensive use in a wide variety of malignancies and the repeated exposures in patients with increased life expectancy. Understanding the incidence of HSR to platinum drugs and associated risk factors can help with the diagnosis and may provide protection against severe HSRs. A thorough clinical history with identification of the typical and atypical symptoms, the relationship with the platin administration, and the number of previous exposures are the key to the diagnosis. An elevated serum tryptase at the time of the HSR indicates that IgE and/or mast cells/basophils were involved in the HSR. Skin testing to platinum drugs is a highly sensitive and specific diagnostic tool, which helps provide risk stratification and management recommendations. Platinum specific IgE measurement and basophil activation test (BAT) are emerging as new diagnostic tools and in combination with skin testing can help support the diagnosis and the cross-reactivity between the three most commonly used platinum drugs, namely carboplatin, cisplatin, and oxaliplatin.

  6. Structures of 38-atom gold-platinum nanoalloy clusters

    Energy Technology Data Exchange (ETDEWEB)

    Ong, Yee Pin; Yoon, Tiem Leong [School of Physics, Universiti Sains Malaysia, 11800 USM, Penang (Malaysia); Lim, Thong Leng [Faculty of Engineering and Technology, Multimedia University, Melaka Campus, 75450 Melaka (Malaysia)

    2015-04-24

    Bimetallic nanoclusters, such as gold-platinum nanoclusters, are nanomaterials promising wide range of applications. We perform a numerical study of 38-atom gold-platinum nanoalloy clusters, Au{sub n}Pt{sub 38−n} (0 ≤ n ≤ 38), to elucidate the geometrical structures of these clusters. The lowest-energy structures of these bimetallic nanoclusters at the semi-empirical level are obtained via a global-minimum search algorithm known as parallel tempering multi-canonical basin hopping plus genetic algorithm (PTMBHGA), in which empirical Gupta many-body potential is used to describe the inter-atomic interactions among the constituent atoms. The structures of gold-platinum nanoalloy clusters are predicted to be core-shell segregated nanoclusters. Gold atoms are observed to preferentially occupy the surface of the clusters, while platinum atoms tend to occupy the core due to the slightly smaller atomic radius of platinum as compared to gold’s. The evolution of the geometrical structure of 38-atom Au-Pt clusters displays striking similarity with that of 38-atom Au-Cu nanoalloy clusters as reported in the literature.

  7. Controlled aniline polymerization strategies for polyaniline micro- and nano self-assembling into practical electronic devices.

    Science.gov (United States)

    Yunus, Sami; Attout, Anne; Bertrand, Patrick

    2009-02-03

    Electroless polymerization of aniline on platinum is investigated for polyaniline micro- and nanostructuring into practical electronic devices. This type of reaction is adapted to estimate its usefulness in a lithographic process. For practical electronic device fabrication, electroless polymerization of aniline can be used to electrically bridge initially independent platinum electrodes. As this application requires a polyaniline bridge to form over a nonconductive material before an electrical contact is obtained, polyaniline growth using chemical oxidative reaction is investigated on substrates presenting surface-tension contrast patterns.

  8. The Researches on Performance and Technology of Strengthened Pure Platinum Wire

    Institute of Scientific and Technical Information of China (English)

    ZHAI Buying; WU Baoan; PAN Xiong; YANG Hao; WANG Yunchun; CHEN Xiaojun; WANG Jianshen; LI Guogang; XUE Liqian

    2012-01-01

    This paper discusses about the purity of strengthened pure platinum wire and the development method of platinum micro wire,in order to solve the difficulties of low tensile strength,easy to break,and low rate of micro wire.And it contrasts some performance of strengthened pure platinum wire and sponge Pt wire.The researches draw a conclusion that the thermoelectric properties of strengthened pure platinum micro wire was in accordance with national standards and satisfied users' requirements.

  9. Insertion devices

    CERN Document Server

    Bahrdt, J

    2006-01-01

    The interaction of an insertion device with the electron beam in a storage ring is discussed. The radiation property including brightness, ux and polarization of an ideal and real planar and helical / elliptical device is described. The magnet design of planar, helical, quasiperiodic devices and of devices with a reduced on axis power density are resumed.

  10. The effects of platinum on nickel electrodes in the nickel hydrogen cell

    Science.gov (United States)

    Zimmerman, Albert H.

    1991-01-01

    Interactions of platinum and platinum compounds with the nickel electrode that are possible in the nickel hydrogen cell, where both the nickel electrode and a platinum catalyst hydrogen electrode are in intimate contact with the alkaline electrolyte, are examined. Additionally, a mechanism of nickel cobalt oxyhydroxide formation in NiH2 cells is presented.

  11. Preparation and Characterization of Atactic Poly(vinyl alcohol)/Platinum Nanocomposites by Electrospinning

    Science.gov (United States)

    Seok Lyoo, Won; Jae Lee, Young; Wook Cha, Jin; Jae Kim, Min; Woo Joo, Sang; Soon Gal, Yeong; Hwan Oh, Tae; Soo Han, Sung

    2010-06-01

    Poly(vinyl alcohol) (PVA)/platinum composite nanofibers were successfully prepared by the electrospinning method. Water-based colloidal platinum in a PVA solution was directly mixed without any chemical or structural modifications into PVA polymer fibers to form organic-inorganic composite nanofibers. The PVA/platinum composite nanofibers were characterized by field emission scanning electron microscopy (SEM).

  12. Platinum Publications, December 30, 2016–January 25, 2017 | Poster

    Science.gov (United States)

    Platinum Publications are selected from articles by NCI at Frederick scientists published in 42 prestigious science journals. This list represents articles published during the time period shown above, as generated from PubMed. Articles designated as Platinum Highlights are noteworthy articles selected from among the most recently published Platinum Publications.

  13. POLYMER-PLATINUM COMPLEX CATALYSTS FOR OXIDATION OF METHANOL TO FORMALDEHYDE

    Institute of Scientific and Technical Information of China (English)

    HUANG Meiyu; HUANG Li; ZHENG Qingyao; WANG Dianxun; JIANG Yingyan

    1984-01-01

    Two kinds of polymer-platinum complexes: silica-supported poly-γ-diphenylphosphinopropyl-siloxane-platinum complex and silica-supported polyphenylsilazane-platinum complex, have been found very active and selective in catalyzation of oxidation of methanol to formaldehyde at room temperature and under an atmospheric oxygen pressure. Their catalytic activities are greatly affected by P or N/Pt gram atomic ratio.

  14. 75 FR 77572 - Proposed Revision of Class E Airspace; Platinum AK

    Science.gov (United States)

    2010-12-13

    ... Federal Aviation Administration 14 CFR Part 71 Proposed Revision of Class E Airspace; Platinum AK AGENCY... action proposes to revise Class E airspace at Platinum AK. The creation of a new Standard Instrument Approach Procedure (SIAP) at the Platinum Airport has made this action necessary to enhance safety...

  15. 76 FR 67793 - Notification of Expanded Pricing Grid for Precious Metals Products Containing Platinum and Gold...

    Science.gov (United States)

    2011-11-02

    ... United States Mint Notification of Expanded Pricing Grid for Precious Metals Products Containing Platinum..., 2009, outlining the new pricing methodology for numismatic products containing platinum and gold. Since that time, the price of platinum and gold has increased considerably, and is approaching the...

  16. 40 CFR 440.110 - Applicability; description of the platinum ore subcategory.

    Science.gov (United States)

    2010-07-01

    ... platinum ore subcategory. 440.110 Section 440.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Platinum Ores Subcategory § 440.110 Applicability; description of the platinum ore subcategory. The provisions of...

  17. Flow Injection Analysis with Electrochemical Detection for Rapid Identification of Platinum-Based Cytostatics and Platinum Chlorides in Water

    Directory of Open Access Journals (Sweden)

    Marketa Kominkova

    2014-02-01

    Full Text Available Platinum-based cytostatics, such as cisplatin, carboplatin or oxaliplatin are widely used agents in the treatment of various types of tumors. Large amounts of these drugs are excreted through the urine of patients into wastewaters in unmetabolised forms. This phenomenon leads to increased amounts of platinum ions in the water environment. The impacts of these pollutants on the water ecosystem are not sufficiently investigated as well as their content in water sources. In order to facilitate the detection of various types of platinum, we have developed a new, rapid, screening flow injection analysis method with electrochemical detection (FIA-ED. Our method, based on monitoring of the changes in electrochemical behavior of analytes, maintained by various pH buffers (Britton-Robinson and phosphate buffer and potential changes (1,000, 1,100 and 1,200 mV offers rapid and cheap selective determination of platinum-based cytostatics and platinum chlorides, which can also be present as contaminants in water environments.

  18. Flow injection analysis with electrochemical detection for rapid identification of platinum-based cytostatics and platinum chlorides in water.

    Science.gov (United States)

    Kominkova, Marketa; Heger, Zbynek; Zitka, Ondrej; Kynicky, Jindrich; Pohanka, Miroslav; Beklova, Miroslava; Adam, Vojtech; Kizek, Rene

    2014-02-04

    Platinum-based cytostatics, such as cisplatin, carboplatin or oxaliplatin are widely used agents in the treatment of various types of tumors. Large amounts of these drugs are excreted through the urine of patients into wastewaters in unmetabolised forms. This phenomenon leads to increased amounts of platinum ions in the water environment. The impacts of these pollutants on the water ecosystem are not sufficiently investigated as well as their content in water sources. In order to facilitate the detection of various types of platinum, we have developed a new, rapid, screening flow injection analysis method with electrochemical detection (FIA-ED). Our method, based on monitoring of the changes in electrochemical behavior of analytes, maintained by various pH buffers (Britton-Robinson and phosphate buffer) and potential changes (1,000, 1,100 and 1,200 mV) offers rapid and cheap selective determination of platinum-based cytostatics and platinum chlorides, which can also be present as contaminants in water environments.

  19. Oscillatory instabilities in the electrooxidation of borohydride on platinum

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Eduardo G.; Varela, Hamilton, E-mail: varela@iqsc.usp.br [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica

    2014-03-15

    The borohydride ion has been pointed as a promising alternative fuel. Most of the investigation on its electrochemistry is devoted to the electrocatalytic aspects of its electrooxidation on platinum and gold surfaces. Besides the known kinetic limitations and intricate mechanism, our Group has recently found the occurrence of two regions of bi-stability and autocatalysis in the electrode potential during the open circuit interaction of borohydride and oxidized platinum surfaces. Following this previous contribution, the occurrence of more complicated phenomena is here presented: namely the presence of electrochemical oscillations during the electrooxidation of borohydride on platinum in alkaline media. Current oscillations were found to be associated to two distinct instability windows and characterized in the resistance-potential parameter plane. The dynamic features of such oscillations suggest the existence of distinct mechanisms according to the potential region. Previously published results obtained under non-oscillatory regime were used to give some hints on the surface chemistry behind the observed dynamics. (author)

  20. Current View in Platinum Drug Mechanisms of Peripheral Neurotoxicity

    Directory of Open Access Journals (Sweden)

    Alessia Chiorazzi

    2015-08-01

    Full Text Available Peripheral neurotoxicity is the dose-limiting factor for clinical use of platinum derivatives, a class of anticancer drugs which includes cisplatin, carboplatin, and oxaliplatin. In particular cisplatin and oxaliplatin induce a severe peripheral neurotoxicity while carboplatin is less neurotoxic. The mechanisms proposed to explain these drugs’ neurotoxicity are dorsal root ganglia alteration, oxidative stress involvement, and mitochondrial dysfunction. Oxaliplatin also causes an acute and reversible neuropathy, supposed to be due by transient dysfunction of the voltage-gated sodium channels of sensory neurons. Recent studies suggest that individual genetic variation may play a role in the pathogenesis of platinum drug neurotoxicity. Even though all these mechanisms have been investigated, the pathogenesis is far from clearly defined. In this review we will summarize the current knowledge and the most up-to-date hypotheses on the mechanisms of platinum drug-induced peripheral neurotoxicity.

  1. Preparation of platinum/iridium scanning probe microscopy tips

    DEFF Research Database (Denmark)

    Sørensen, Alexis Hammer; Hvid, U.; Mortensen, M.W.

    1999-01-01

    for the production of sharp tips. After being etched the tips are ready for use in scanning tunneling microscopes, or they may be bent to form integrated tip/cantilever systems in ordinary commercial atomic force microscopes, being applicable as tapping mode tips and as electrostatic force microscopy tips. ©1999......We report on the development of an etching setup for use in the preparation of platinum/iridium tips for atomic force microscopy and scanning electrostatic force microscopy as well as scanning tunneling microscopy. The etching process is based on a two step electrochemical procedure. The first step....... This mechanism is based on the formation of oxygen and hydrogen at the platinum/iridium electrode when the potential is above the dissociation potential of water (~ 1.23 V) and storage of these products interstitially in the outer layers of the platinum wire. This leads to "microexplosions" that detach fragments...

  2. Platinum-Iridium Alloy Films Prepared by MOCVD

    Institute of Scientific and Technical Information of China (English)

    WEI Yan; CHEN Li; CAI Hongzhong; ZHENG Xu; YANG Xiya; HU Changyi

    2012-01-01

    Platinum-Iridium alloy films were prepared by MOCVD on Mo substrate using metal-acetylacetonate precursors.Effects of deposition conditions on composition,microstructure and mechanical properties were determined.In these experimental conditions,the purities of films are high and more than 99.0%.The films are homogeneous and monophase solid solution of Pt and Ir.Weight percentage of platinum are much higher than iridium in the alloy.Lattice constant of the alloy changes with the platinum composition.Iridium composition showing an up-down-up trend at the precursor temperature of 190~230℃ and the deposition temperature at 400~550℃.The hardness of Pt-Ir alloys prepared by MOCVD is three times more than the alloys prepared by casting.

  3. Interaction of DNA with Bis(diiminosuccinonitrilo)platinum(Ⅱ)

    Institute of Scientific and Technical Information of China (English)

    ZHANG Zhi-Gang; SUN Yuan-Yuan; JIANG Xiao-Ming

    2008-01-01

    Interaction of DNA with bis(diiminosuccinonitrilo)platinum(Ⅱ) has been studied by UV-visible absorbance spectra, fluorescence spectra and viscosity measurements. The UV-visible absorption spectra of the metal complex exhibit hypochromism with a small blue shift on interaction with DNA. Scatchard plot analyses indicate that the binding sites of the metal complex on DNA are different from those of ethidium bromide. Viscosity experiments reveal that the binding of the metal complex decreases the relative viscosity of DNA. These results suggest that the platinum diimine complex interact with DNA by surface binding. These studies are helpful for us to understand the action mechanism of bis(diiminosuccinonitrilo)platinum(Ⅱ) as a potential photodynamic therapeutic agent, and further to develop it.

  4. Synthesis and Electrocatalytic Performance of BDD-Supported Platinum Nanoparticles

    Science.gov (United States)

    Lyu, Xiao; Hu, Jingping; Foord, John S.; Lou, Changsheng; Zhang, Weiqiang

    2015-02-01

    Platinum nanoparticles were deposited on boron-doped diamond substrate by electroless method without pre-activation. The mechanism of this deposition is a galvanic process along with a chemical process. Platinum particles are in nanoscale with diameter around 30-50 nm and height of around 3 nm observed from AFM and SEM images. The electrochemical activity of Pt nanoparticles was evaluated by cyclic voltammograms of hydrogen desorption process in 0.5 M H2SO4. The deposited platinum shows great stability in subsequent cycling in sulfuric acid and exhibits a high selectivity toward H2O2 detection in the range of 1 to 400 μM compared with those produced by electrochemical deposition.

  5. Decitabine reactivated pathways in platinum resistant ovarian cancer.

    Science.gov (United States)

    Fang, Fang; Zuo, Qingyao; Pilrose, Jay; Wang, Yinu; Shen, Changyu; Li, Meng; Wulfridge, Phillip; Matei, Daniela; Nephew, Kenneth P

    2014-06-15

    Combination therapy with decitabine, a DNMTi and carboplatin resensitized chemoresistant ovarian cancer (OC) to platinum inducing promising clinical activity. We investigated gene-expression profiles in tumor biopsies to identify decitabine-reactivated pathways associated with clinical response. Gene-expression profiling was performed using RNA from paired tumor biopsies before and 8 days after decitabine from 17 patients with platinum resistant OC. Bioinformatic analysis included unsupervised hierarchical-clustering, pathway and GSEA distinguishing profiles of "responders" (progression-free survival, PFS>6 months) and "non-responders" (PFSdecitabine (TGF-β and Hh). Gene-expression profiling identified specific pathways altered by decitabine and associated with platinum-resensitization and clinical benefit in OC. Our data could influence patient stratification for future studies using epigenetic therapies.

  6. A self-polishing platinum ring voltammetric sensor and its application to complex media.

    Science.gov (United States)

    Cavanillas, Santiago; Winquist, Fredrik; Eriksson, Mats

    2015-02-15

    A self-polishing voltammetric sensor was recently developed and has been applied to samples of urea, milk and sewage water. The polishing device continuously grinds a platinum ring electrode, offering a reproducible and clean electrode surface. Principal component analysis (PCA) and partial least squares (PLS) techniques were applied to interpret the data and to build prediction models. In an evaluation of samples with different urea concentrations, the grinding step allows for repeatable measurements, similar to those after electrochemical cleaning. Furthermore, for the determination of sewage water concentrations in drinking water and for the evaluation of different fat contents in milk samples, the polishing eliminates sensor drift produced by electrode fouling. The results show that the application of a self-polishing unit offers a promising tool for electrochemical studies of difficult analytes and complex media. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Amperometric Determination of Indole-3-acetic Acid Based on Platinum Nanowires and Carbon Nanotubes

    Institute of Scientific and Technical Information of China (English)

    Ruo Zhong WANG; Lang Tao XIAO; Ming Hui YANG; Jun Hui DING; Feng Li QU; Guo Li SHEN

    2006-01-01

    Platinum nanowire (PtNW) can be grown by electrodeposition in polycarbonate membrane, with the average diameter of the nanowires about 250 nm. The PtNW and multiwalled carbon nanotubes (CNT) are then dispersed into chitosan (CHIT) solution. The resulting PtNW-CNT-CHIT material brings new capabilities for electrochemical devices by using the synergistic action of the electrocatalytic activity of PtNW and CNT. By dropping the PtNW-CNT-CHIT film onto the glassy carbon (GC) electrode surface, and after evaporationan amperometric sensor for the determination of indole-3-acetic acid (IAA) was developed. The oxidation current of IAA increased significantly at the PtNW-CNT-CHIT film coated GC electrode,in contrast to that at the CNT-CHIT modified GC. The linear response of the sensor is from 50ng/ml to 50 μg/ml with a detection limit of 25 ng/mL.

  8. Platinum-based nanocomposite electrodes for low-temperature solid oxide fuel cells with extended lifetime

    Science.gov (United States)

    Lee, Yoon Ho; Cho, Gu Young; Chang, Ikwhang; Ji, Sanghoon; Kim, Young Beom; Cha, Suk Won

    2016-03-01

    Due to its high catalytic activity and convenient fabrication procedure that uses physical vapor deposition (PVD), nanofabricated platinum (Pt) is widely used for low temperature operating solid oxide fuel cells (LT-SOFC). However, the poor thermal stability of nanofabricated Pt accelerates cell performance degradation. To solve this problem, we apply a thermal barrier coating and use the dispersion hardening process for the nanofabrication of Pt by sputter device. Through morphological and electrochemical data, GDC modified nano-porous Pt electrodes shows improved performance and thermal stability at the operating temperature of 500 °C. While the peak power density of pure Pt sample is 6.16 mW cm-2 with a performance degradation of 43% in an hour, the peak power density of the GDC modified Pt electrodes are in range of 7.42-7.91 mW cm-2 with a 7-16% of performance degradation.

  9. Engineering Customized TALENs Using the Platinum Gate TALEN Kit.

    Science.gov (United States)

    Sakuma, Tetsushi; Yamamoto, Takashi

    2016-01-01

    Among various strategies for constructing customized transcription activator-like effector nucleases (TALENs), the Golden Gate assembly is the most widely used and most characterized method. The principle of Golden Gate assembly involves cycling reactions of digestion and ligation of multiple plasmids in a single tube, resulting in PCR-, fragmentation-, and purification-free concatemerization of DNA-binding repeats. Here, we describe the protocols for Golden Gate assembly-based TALEN construction using the Platinum Gate TALEN Kit, which allows generation of highly active Platinum TALENs.

  10. Distribution of platinum and cobalt atoms in a bimetallic nanoparticle

    Science.gov (United States)

    Chui, Yu Hang; Chan, Kwong-Yu

    2005-06-01

    Molecular dynamics simulations are performed to investigate the atomic distribution and the structure of platinum-cobalt nanoparticles. Heating and cooling techniques are applied before getting equilibrated structures at 298 K. Both crystalline (fcc) and amorphous structures are partly observed depending on cooling rates. The atomic distributions in different regions of a bimetallic nanoparticle are analyzed. Although platinum tends to occupy surface and near-surface sites of the bimetallic nanoparticle, a complete segregation to form a core-shell structure is not observed.

  11. Addition of platinum and silver nanoparticles to toughen dental porcelain.

    Science.gov (United States)

    Fujieda, Tokushi; Uno, Mitsunori; Ishigami, Hajime; Kurachi, Masakazu; Wakamatsu, Nobukazu; Doi, Yutaka

    2012-01-01

    Several studies have investigated toughening porcelain that is layered over a frame or a core. The introduction of residual compressive stress to the surface of porcelain has been shown to be effective to strengthen it. In the present study, nanoparticles of precious metals of silver and platinum (rather than non-precious metals) were used to evaluate if they could increase the fracture resistance of porcelain. The addition of silver and platinum nanoparticles was found to improve the mechanical properties of porcelain since it increased both the Young's modulus and the fracture toughness of commercial porcelain.

  12. Diffuse X-Ray Scattering from Several Platinum Chain Compounds

    DEFF Research Database (Denmark)

    Braude, A.; Lindegaard-Andersen, Asger; Carneiro, K.

    1980-01-01

    Values of the Fermi wavevector for several platinum based one-dimensional conductors were determined from diffuse X-ray scattering measurements. The values were compared with those expected from the chemical compositions. The importance of conclusive values of this parameter is stressed and the c......Values of the Fermi wavevector for several platinum based one-dimensional conductors were determined from diffuse X-ray scattering measurements. The values were compared with those expected from the chemical compositions. The importance of conclusive values of this parameter is stressed...

  13. Effects of Cluster Size on Platinum-Oxygen Bonds Formation in Small Platinum Clusters

    Science.gov (United States)

    Oemry, Ferensa; Padama, Allan Abraham B.; Kishi, Hirofumi; Kunikata, Shinichi; Nakanishi, Hiroshi; Kasai, Hideaki; Maekawa, Hiroyoshi; Osumi, Kazuo; Sato, Kaoru

    2012-03-01

    We present the results of density functional theory calculation in oxygen dissociative adsorption process on two types of isolated platinum (Pt) clusters: Pt4 and Pt10, by taking into account the effect of cluster reconstruction. The strength of Pt-Pt bonds in the clusters is mainly defined by d-d hybridization and interstitial bonding orbitals (IBO). Oxygen that adsorbed on the clusters is weakening the IBO and thus inducing geometry reconstruction as occurred in Pt10 cluster. However, cluster that could undergo structural deformation is found to promote oxygen dissociation with no energy barrier. The details show that maintaining well-balanced of attractive and repulsive (Hellmann-Feynman) forces between atoms is considered to be the main key to avoid any considerable rise of energy barrier. Furthermore, a modest energy barrier that gained in Pt4 cluster is presumed to be originate from inequality of intramolecular forces between atoms.

  14. Preparation of MgO supported platinum nanoparticle catalyst using toluene dispersed platinum sol

    Science.gov (United States)

    Seth, Jhumur; Nepak, Devadutta; Chaudhari, Vijay R.; Prasad, Bhagavatula L. V.

    2017-10-01

    An effective way of anchoring Pt nanoparticles on MgO using toluene dispersed platinum nanoparticles (Pt-NPs) as one of the ingredient is demonstrated. The usage of particles dispersed in toluene allows the retention of size and size distribution of preformed Pt-NPs even after deposition on MgO support with high active surface area, which is crucial for heterogeneous catalysis. The catalyst thus prepared, displayed selective hydrogenation of cinnamaldehyde to cinnamyl alcohol with high turn on frequency (TOF - 105 h-1) with respect to the total Pt content. We attribute this efficient catalytic performance to the uniform distribution and deposition of Pt on the active MgO support and its better accessible surface as evidenced by the cyclic-voltammetry results.

  15. Effect of Rotation Rate on the Formation of Platinum-modified Polyaniline Film and Electrocatalytic Oxidation of Methanol

    Institute of Scientific and Technical Information of China (English)

    Qiu Hong LI; Lin NIU; Chang Qiao ZHANG; Feng Hua WEI; Hu ZHANG

    2004-01-01

    The oxidation of methanol was investigated on platinum-modified polyaniline electrode. Changes in the electrode rotation rates (Ω) during platinum electrodeposition remarkably affect the formation and distribution of platinum in the polymer matrix and consequently lead to different currents of methanol oxidation. The results show that platinum loading is proportional to rotation ratesΩ1/2.

  16. Physical and electrochemical study of platinum thin films deposited by sputtering and electrochemical methods

    Energy Technology Data Exchange (ETDEWEB)

    Quinones, C. [Universidad de Cartagena, Cartagena de Indias (Colombia); Departamento de Quimica, Universidad Nacional de Colombia, Cra. 30 No 45-03, Bogota (Colombia); Vallejo, W., E-mail: wavallejol@unal.edu.co [Departamento de Quimica, Universidad Nacional de Colombia, Cra. 30 No 45-03, Bogota (Colombia); Mesa, F. [Departamento de Ciencias Basicas, Universidad Libre, Carrera 70 No 53-40, Bogota (Colombia)

    2011-06-15

    In this work platinum thin films deposited by sputtering and electrochemical methods were characterized through physical and electrochemical analysis. The as-grown platinum thin films were characterized through X-ray diffraction (XRD), atomic force microscopy (AFM); scanning electronic microscopy (SEM) and through electrochemical impedance spectroscopy (EIS) measurements. Structural studies indicated that platinum thin films were polycrystalline. Morphological characteristics were significantly affected by the substrate type and synthesis method. Finally the EIS analysis indicated that platinum films were electrochemically stable and present both low resistance of charge transfer and low series resistance; the equivalent circuit of platinum interface has been proposed.

  17. Recent strikes in South Africa’s platinum-group metal mines: effects upon world platinum-group metal supplies

    Science.gov (United States)

    Yager, Thomas R.; Soto-Viruet, Yadira; Barry, James J.

    2012-01-01

    The recent labor disputes over wages and working conditions that have affected South Africa’s three leading platinum-group metal (PGM) producers have affected an industry already plagued by market pressures and labor unrest and raised the specter of constraints in the world’s supply of these metals. Although low demand for these metals in 2011 and 2012 helped to offset production losses of recent years, and particularly those losses caused by the strikes in 2012, a prolonged resumption of strikes could cause severe shortages of iridium, platinum, rhodium, ruthenium, and, to a lesser extent, palladium.

  18. [Comparison of the effectiveness of platinum-based chemotherapy versus non-platinum-based chemotherapy for triple-negative breast cancer with metastases confined to the lungs].

    Science.gov (United States)

    Hong, Ruoxi; Ma, Fei; Shi, Xiuqing; Li, Qing; Zhang, Pin; Yuan, Peng; Wang, Jiayu; Fan, Ying; Cai, Ruigang; Li, Qiao; Xu, Binghe

    2014-10-01

    To compare the effect of first-line treatment with platinum-based chemotherapy and non-platinum-based chemotherapy in patients with lung metastases from triple negative breast cancer (TNBC). Sixty-five eligible patients were divided into platinum-treated group and non-platinum-treated group according to the first-line therapy. Factors predicting the chemotherapeutic efficacy included overall survival (OS), progression-free survival (PFS) and objective response (OR). In the platinum-treated group of 32 patients, 2 cases (6.3%) achieved CR, 16 cases (50.0%) achieved PR, 11 (34.4%) cases achieved SD, and 3 patients (9.4%) achieved PD. In the non-platinum-treated group of 33 patients, 2 cases (6.1%) achieved CR, 6 cases (18.2%) achieved PR, 16 cases (48.5%) achieved SD, and 9 cases (27.3%) achieved PD. Median PFS was significantly longer in the platinum-treated group than in the non-platinum-treated group (10 months vs. 6.0 months, P = 0.012), and OS was also improved (32 months vs. 22 months, P = 0.006). Multivariate analysis of several factors including local-regional lymph node involvement, lung metastasis-related symptoms, first-line platinum-based chemotherapy, disease-free interval, size and number of lung lesions, showed that first-line platinum-based chemotherapy was an independent prognostic factor for TNBC patients with lung metastases. Compared with non-platinum-based chemotherapy, the first-line platinum-based chemotherapy can improve PFS and OS in TNBC patients with metastases confined to the lungs.

  19. Single-Atom Catalyst of Platinum Supported on Titanium Nitride for Selective Electrochemical Reactions.

    Science.gov (United States)

    Yang, Sungeun; Kim, Jiwhan; Tak, Young Joo; Soon, Aloysius; Lee, Hyunjoo

    2016-02-05

    As a catalyst, single-atom platinum may provide an ideal structure for platinum minimization. Herein, a single-atom catalyst of platinum supported on titanium nitride nanoparticles were successfully prepared with the aid of chlorine ligands. Unlike platinum nanoparticles, the single-atom active sites predominantly produced hydrogen peroxide in the electrochemical oxygen reduction with the highest mass activity reported so far. The electrocatalytic oxidation of small organic molecules, such as formic acid and methanol, also exhibited unique selectivity on the single-atom platinum catalyst. A lack of platinum ensemble sites changed the reaction pathway for the oxygen-reduction reaction toward a two-electron pathway and formic acid oxidation toward direct dehydrogenation, and also induced no activity for the methanol oxidation. This work demonstrates that single-atom platinum can be an efficient electrocatalyst with high mass activity and unique selectivity.

  20. A Density Functional Study of Bare and Hydrogenated Platinum Clusters

    CERN Document Server

    Sebetci, A

    2006-01-01

    We perform density functional theory calculations using Gaussian atomic-orbital methods within the generalized gradient approximation for the exchange and correlation to study the interactions in the bare and hydrogenated platinum clusters. The minimum-energy structures, binding energies, relative stabilities, vibrational frequencies and the highest occupied and lowest unoccupied molecular-orbital gaps of Pt_nH_m (n=1-5, m=0-2) clusters are calculated and compared with previously studied pure platinum and hydrogenated platinum clusters. We investigate any magic behavior in hydrogenated platinum clusters and find that Pt_4H_2 is more stable than its neighboring sizes. Our results do not agree with a previous conclusion that 3D geometries of Pt tetramer and pentamer are unfavored. On the contrary, the lowest energy structure of Pt_4 is found to be a distorted tetrahedron and that of Pt_5 is found to be a bridge site capped tetrahedron which is a new global minimum for Pt_5 cluster. The successive addition of H ...

  1. In situ measurements of Merensky pillar behaviour at Impala Platinum

    CSIR Research Space (South Africa)

    Watson, BP

    2009-12-01

    Full Text Available to stabilize the stoping excavations. This paper describes the in situ measurement, of stress within a Merensky pillar from Impala Platinum. These measurements were used to derive a stress-strain curve that includes pre and post failure behaviour. 2D FLAC...

  2. EGFR-targeting peptide-coupled platinum(IV) complexes.

    Science.gov (United States)

    Mayr, Josef; Hager, Sonja; Koblmüller, Bettina; Klose, Matthias H M; Holste, Katharina; Fischer, Britta; Pelivan, Karla; Berger, Walter; Heffeter, Petra; Kowol, Christian R; Keppler, Bernhard K

    2017-06-01

    The high mortality rate of lung cancer patients and the frequent occurrence of side effects during cancer therapy demonstrate the need for more selective and targeted drugs. An important and well-established target for lung cancer treatment is the occasionally mutated epidermal growth factor receptor (EGFR). As platinum(II) drugs are still the most important therapeutics against lung cancer, we synthesized in this study the first platinum(IV) complexes coupled to the EGFR-targeting peptide LARLLT (and the shuffled RTALLL as reference). Notably, HPLC-MS measurements revealed two different peaks with the same molecular mass, which turned out to be a transcyclization reaction in the linker between maleimide and the coupled cysteine moiety. With regard to the EGFR specificity, subsequent biological investigations (3-day viability, 14-day clonogenic assays and platinum uptake) on four different cell lines with different verified EGFR expression levels were performed. Unexpectedly, the results showed neither an enhanced activity nor an EGFR expression-dependent uptake of our new compounds. Consequently, fluorophore-coupled peptides were synthesized to re-evaluate the targeting ability of LARLLT itself. However, also with these molecules, flow cytometry measurements showed no correlation of drug uptake with the EGFR expression levels. Taken together, we successfully synthesized the first platinum(IV) complexes coupled to an EGFR-targeting peptide; however, the biological investigations revealed that LARLLT is not an appropriate peptide for enhancing the specific uptake of small-molecule drugs into EGFR-overexpressing cancer cells.

  3. Electroreduction of cefetamet on mercury platinum and gold electrodes

    Directory of Open Access Journals (Sweden)

    P. ZUMAN

    2000-01-01

    Full Text Available The electroreduction of cefetamet (CEF using gold and platinum electrodes has been investigated in slightly alkaline medium (pH 8.40 where adsorption, previously observed at mercury electrode, was pronounced. This investigation was performed in order to determine whether the adsorption interfers with the reduction process even at solid electrodes and to compare with a mercury electrode.

  4. Platinum on Carbon Nanofibers as Catalyst for Cinnamaldehyde Hydrogenation

    NARCIS (Netherlands)

    Plomp, A.J.

    2009-01-01

    The aim of the work described in this thesis was to investigate the role and nature of nanostructured carbon materials, oxygen surface groups and promoters on platinum-based catalysts for the selective hydrogenation of cinnamaldehyde. The selective hydrogenation of cinnamaldehyde to cinnamyl alcohol

  5. Platinum redispersion on metal oxides in low temperature fuel cells

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Cerri, Isotta; Nagami, Tetsuo

    2013-01-01

    in detail; however, due to different operating conditions it is not straightforward to link the chemical and the electrochemical environment. The largest differences reflect in (1) the oxidation state of the surface (the oxygen species coverage), (2) temperature and (3) the possibility of platinum...

  6. Preparation of low-platinum-content platinum-nickel, platinum-cobalt binary alloy and platinum-nickel-cobalt ternary alloy catalysts for oxygen reduction reaction in polymer electrolyte fuel cells

    Science.gov (United States)

    Li, Mu; Lei, Yanhua; Sheng, Nan; Ohtsuka, Toshiaki

    2015-10-01

    A series of low-platinum-content platinum-nickel (Pt-Ni), platinum-cobalt (Pt-Co) binary alloys and platinum-nickel-cobalt (Pt-Ni-Co) ternary alloys electrocatalysts were successfully prepared by a three-step process based on electrodeposition technique and studied as electrocatalysts for oxygen reduction reaction (ORR) in polymer-electrolyte fuel cells. Kinetics of ORR was studied in 0.5 M H2SO4 solution on the Pt-Ni, Pt-Co and Pt-Ni-Co alloys catalysts using rotating disk electrode technique. Both the series of Pt-Ni, Pt-Co binary alloys and the Pt-Ni-Co ternary alloys catalysts exhibited an obvious enhancement of ORR activity in comparison with pure Pt. The significant promotion of ORR activities of Pt-Ni and Pt-Co binary alloys was attributed to the enhancement of the first electron-transfer step, whereas, Pt-Ni-Co ternary alloys presented a more complicated mechanism during the electrocatalysis process but a much more efficient ORR activities than the binary alloys.

  7. Polyamide platinum anticancer complexes designed to target specific DNA sequences.

    Science.gov (United States)

    Jaramillo, David; Wheate, Nial J; Ralph, Stephen F; Howard, Warren A; Tor, Yitzhak; Aldrich-Wright, Janice R

    2006-07-24

    Two new platinum complexes, trans-chlorodiammine[N-(2-aminoethyl)-4-[4-(N-methylimidazole-2-carboxamido)-N-methylpyrrole-2-carboxamido]-N-methylpyrrole-2-carboxamide]platinum(II) chloride (DJ1953-2) and trans-chlorodiammine[N-(6-aminohexyl)-4-[4-(N-methylimidazole-2-carboxamido)-N-methylpyrrole-2-carboxamido]-N-methylpyrrole-2-carboxamide]platinum(II) chloride (DJ1953-6) have been synthesized as proof-of-concept molecules in the design of agents that can specifically target genes in DNA. Coordinate covalent binding to DNA was demonstrated with electrospray ionization mass spectrometry. Using circular dichroism, these complexes were found to show greater DNA binding affinity to the target sequence: d(CATTGTCAGAC)(2), than toward either d(GTCTGTCAATG)(2,) which contains different flanking sequences, or d(CATTGAGAGAC)(2), which contains a double base pair mismatch sequence. DJ1953-2 unwinds the DNA helix by around 13 degrees , but neither metal complex significantly affects the DNA melting temperature. Unlike simple DNA minor groove binders, DJ1953-2 is able to inhibit, in vitro, RNA synthesis. The cytotoxicity of both metal complexes in the L1210 murine leukaemia cell line was also determined, with DJ1953-6 (34 microM) more active than DJ1953-2 (>50 microM). These results demonstrate the potential of polyamide platinum complexes and provide the structural basis for designer agents that are able to recognize biologically relevant sequences and prevent DNA transcription and replication.

  8. Molecular pathways: the immunogenic effects of platinum-based chemotherapeutics

    NARCIS (Netherlands)

    Hato, S.V.; Khong, A.; Vries, I.J.M. de; Lesterhuis, W.J.

    2014-01-01

    The platinum-based drugs cisplatin, carboplatin, and oxaliplatin belong to the most widely used chemotherapeutics in oncology, showing clinical efficacy against many solid tumors. Their main mechanism of action is believed to be the induction of cancer cell apoptosis as a response to their covalent

  9. Effect of heat leaks in platinum resistance thermometry.

    Science.gov (United States)

    Goldratt, E; Yeshurun, Y; Greenfield, A J

    1980-03-01

    The effect of heat leaks in platinum resistance thermometry is analyzed. An experimental method is proposed for estimating the magnitude of this effect. Results are reported for the measurement of the temperature of a hot, solid body under different heat-leak configurations. Design criteria for thermometers are presented which minimize the effect of such heat leaks.

  10. Production of platinum radioisotopes at Brookhaven Linac Isotope Producer (BLIP

    Directory of Open Access Journals (Sweden)

    Smith Suzanne V.

    2017-01-01

    Full Text Available The accelerator production of platinum isotopes was investigated at the Brookhaven Linac Isotope Producer (BLIP. In this study high purity natural platinum foils were irradiated at 53.2, 65.7, 105.2, 151.9, 162.9 and 173.3.MeV. The irradiated foils were digested in aqua regia and then converted to their hydrochloride salt with concentrated hydrochloric acid before analyzing by gamma spectrometry periodically for at least 10 days post end of bombardment. A wide range of platinum (Pt, gold (Au and iridium (Ir isotopes were identified. Effective cross sections at BLIP for Pt-188, Pt-189, Pt-191 and Pt-195m were compared to literature and theoretical cross sections determined using Empire-3.2. The majority of the effective cross sections (<70 MeV confirm those reported in the literature. While the absolute values of the theoretical cross sections were up to a factor of 3 lower, Empire 3.2 modeled thresholds and maxima correlated well with experimental values. Preliminary evaluation into a rapid separation of Pt isotopes from high levels of Ir and Au isotopes proved to be a promising approach for large scale production. In conclusion, this study demonstrated that with the use of isotopically enriched target material accelerator production of selected platinum isotopes is feasible over a wide proton energy range.

  11. A Multimethod Approach for Investigating Algal Toxicity of Platinum Nanoparticles

    DEFF Research Database (Denmark)

    Sørensen, Sara Nørgaard; Engelbrekt, Christian; Lützhøft, Hans-Christian Holten

    2016-01-01

    The ecotoxicity of platinum nanoparticles (PtNPs) widely used in for example automotive catalytic converters, is largely unknown. This study employs various characterization techniques and toxicity end points to investigate PtNP toxicity toward the green microalgae Pseudokirchneriella subcapitata...

  12. Responses of fibroblasts and glial cells to nanostructured platinum surfaces

    Science.gov (United States)

    Pennisi, C. P.; Sevcencu, C.; Dolatshahi-Pirouz, A.; Foss, M.; Lundsgaard Hansen, J.; Nylandsted Larsen, A.; Zachar, V.; Besenbacher, F.; Yoshida, K.

    2009-09-01

    The chronic performance of implantable neural prostheses is affected by the growth of encapsulation tissue onto the stimulation electrodes. Encapsulation is associated with activation of connective tissue cells at the electrode's metallic contacts, usually made of platinum. Since surface nanotopography can modulate the cellular responses to materials, the aim of the present work was to evaluate the 'in vitro' responses of connective tissue cells to platinum strictly by modulating its surface nanoroughness. Using molecular beam epitaxy combined with sputtering, we produced platinum nanostructured substrates consisting of irregularly distributed nanopyramids and investigated their effect on the proliferation, cytoskeletal organization and cellular morphology of primary fibroblasts and transformed glial cells. Cells were cultured on these substrates and their responses to surface roughness were studied. After one day in culture, the fibroblasts were more elongated and their cytoskeleton less mature when cultured on rough substrates. This effect increased as the roughness of the surface increased and was associated with reduced cell proliferation throughout the observation period (4 days). Morphological changes also occurred in glial cells, but they were triggered by a different roughness scale and did not affect cellular proliferation. In conclusion, surface nanotopography modulates the responses of fibroblasts and glial cells to platinum, which may be an important factor in optimizing the tissue response to implanted neural electrodes.

  13. Enhancement of Platinum Cathode Catalysis by Addition of Transition Metals

    Science.gov (United States)

    Duong, Hung Tuan

    2009-01-01

    The sluggish kinetics of oxygen reduction reaction (ORR) contributes significantly to the loss of cathode overpotential in fuel cells, thus requiring high loadings of platinum (Pt), which is an expensive metal with limited supply. However, Pt and Pt-based alloys are still the best available electrocatalysts for ORR thus far. The research presented…

  14. Platinum on Carbon Nanofibers as Catalyst for Cinnamaldehyde Hydrogenation

    NARCIS (Netherlands)

    Plomp, A.J.

    2009-01-01

    The aim of the work described in this thesis was to investigate the role and nature of nanostructured carbon materials, oxygen surface groups and promoters on platinum-based catalysts for the selective hydrogenation of cinnamaldehyde. The selective hydrogenation of cinnamaldehyde to cinnamyl alcohol

  15. SILICA-BOUND CROWN ETHERS PLATINUM COMPLEX AS HYDROSILYLATION CATALYST

    Institute of Scientific and Technical Information of China (English)

    CHEN Yuanyin; MENG Lingzhi; LI Liping; LUO Jieqi; HU Jinchang

    1993-01-01

    Silica-bound 15-Crown-5, 18-Crown-6 with a spacer of propyloxymethyl and their platinum complexes have been synthesized. It was found that they were efficient catalysts for the hydrosilylation of olefins with triethoxysilane in the temperature range of 60 to 130 ℃ .

  16. Niraparib Maintenance Therapy in Platinum-Sensitive, Recurrent Ovarian Cancer

    DEFF Research Database (Denmark)

    Mirza, Mansoor R; Monk, Bradley J; Herrstedt, Jørn

    2016-01-01

    Background Niraparib is an oral poly(adenosine diphosphate [ADP]-ribose) polymerase (PARP) 1/2 inhibitor that has shown clinical activity in patients with ovarian cancer. We sought to evaluate the efficacy of niraparib versus placebo as maintenance treatment for patients with platinum-sensitive, ...

  17. Tissue Platinum Concentration and Tumor Response in Non–Small-Cell Lung Cancer

    Science.gov (United States)

    Kim, Eric S.; Lee, J. Jack; He, Guangan; Chow, Chi-Wan; Fujimoto, Junya; Kalhor, Neda; Swisher, Stephen G.; Wistuba, Ignacio I.; Stewart, David J.; Siddik, Zahid H.

    2012-01-01

    Purpose Platinum resistance is a major limitation in the treatment of advanced non–small-cell lung cancer (NSCLC). Reduced intracellular drug accumulation is one of the most consistently identified features of platinum-resistant cell lines, but clinical data are limited. We assessed the effects of tissue platinum concentrations on response and survival in NSCLC. Patients and Methods We measured total platinum concentrations by flameless atomic absorption spectrophotometry in 44 archived fresh-frozen NSCLC specimens from patients who underwent surgical resection after neoadjuvant platinum-based chemotherapy. Tissue platinum concentration was correlated with percent reduction in tumor size on post- versus prechemotherapy computed tomography scans. The relationship between tissue platinum concentration and survival was assessed by univariate and multicovariate Cox proportional hazards regression model analysis and Kaplan-Meier analysis. Results Tissue platinum concentration correlated significantly with percent reduction in tumor size (P < .001). The same correlations were seen with cisplatin, carboplatin, and all histology subgroups. Furthermore, there was no significant impact of potential variables such as number of cycles and time lapse from last chemotherapy on platinum concentration. Patients with higher platinum concentration had longer time to recurrence (P = .034), progression-free survival (P = .018), and overall survival (P = .005) in the multicovariate Cox model analysis after adjusting for number of cycles. Conclusion This clinical study established a relationship between tissue platinum concentration and response in NSCLC. It suggests that reduced platinum accumulation might be an important mechanism of platinum resistance in the clinical setting. Further studies investigating factors that modulate intracellular platinum concentration are warranted. PMID:22891266

  18. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  19. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-06-02

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  20. Concentration device

    DEFF Research Database (Denmark)

    2013-01-01

    A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...

  1. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  2. Study on Platinum Coating Depth in Focused Ion Beam Diamond Cutting Tool Milling and Methods for Removing Platinum Layer

    Directory of Open Access Journals (Sweden)

    Woong Kirl Choi

    2015-09-01

    Full Text Available In recent years, nanomachining has attracted increasing attention in advanced manufacturing science and technologies as a value-added processes to control material structures, components, devices, and nanoscale systems. To make sub-micro patterns on these products, micro/nanoscale single-crystal diamond cutting tools are essential. Popular non-contact methods for the macro/micro processing of diamond composites are pulsed laser ablation (PLA and electric discharge machining (EDM. However, for manufacturing nanoscale diamond tools, these machining methods are not appropriate. Despite diamond’s extreme physical properties, diamond can be micro/nano machined relatively easily using a focused ion beam (FIB technique. In the FIB milling process, the surface properties of the diamond cutting tool is affected by the amorphous damage layer caused by the FIB gallium ion collision and implantation and these influence the diamond cutting tool edge sharpness and increase the processing procedures. To protect the diamond substrate, a protection layer—platinum (Pt coating is essential in diamond FIB milling. In this study, the depth of Pt coating layer which could decrease process-induced damage during FIB fabrication is investigated, along with methods for removing the Pt coating layer on diamond tools. The optimum Pt coating depth has been confirmed, which is very important for maintaining cutting tool edge sharpness and decreasing processing procedures. The ultra-precision grinding method and etching with aqua regia method have been investigated for removing the Pt coating layer. Experimental results show that when the diamond cutting tool width is bigger than 500 nm, ultra-precision grinding method is appropriate for removing Pt coating layer on diamond tool. However, the ultra-precision grinding method is not recommended for removing the Pt coating layer when the cutting tool width is smaller than 500 nm, because the possibility that the diamond

  3. Study of gold-platinum and platinum-gold surface modification and its influence on hydrogen evolution and oxygen reduction

    Directory of Open Access Journals (Sweden)

    BRANIMIR N. GRGUR

    2005-02-01

    Full Text Available Surface modification of the electrodes was conducted from sulfuric acid solutions containing the corresponding metal–chloride complexes using cyclic voltammetry. Comparing the charges of the hydrogen underpotential deposition region, and the corresponding oxide reduction regions, it is concluded that a platinum overlayer on gold forms 3D islands, while gold on platinum forms 2D islands. Foreign metals present in an amount of up to one monolayer exert an influence on the change in reaction rate with respect to both hydrogen evolution (HER and oxygen reduction (ORR reactions. Aplatinum overlayer on a gold substrate increases the activity forHER and for ORR, compared with pure gold. These results can be understood in terms of a simple model, in which the change in the H and OH binding energies are directly proportional to the shift of the d-bond center of the overlayer. On the contrary, a gold layer on platinum slightly decreases the activity for both reactions compared with pure platinum.

  4. Optimizing treatment of the partially platinum-sensitive ovarian cancer patient.

    Science.gov (United States)

    Colombo, Nicoletta

    2013-12-01

    Ovarian cancer is the leading cause of gynecological cancer deaths worldwide. Despite primary treatment with platinum-containing regimens, the majority of women will experience recurrent disease and subsequent death. Recurrent ovarian cancer remains a challenge for successful management, and the choice of second-line chemotherapy is complex due to the range of different factors that need to be considered. One of the main considerations is the platinum-free interval and, specifically, the optimal treatment for patients who are partially platinum-sensitive (platinum-free interval: 6-12 months). Data from the large, multicenter, randomized OVA-301 study have shown that combined trabectedin-pegylated liposomal doxorubicin (PLD) significantly prolonged median overall survival compared with PLD alone (p = 0.0027) in 214 patients with partially platinum-sensitive advanced relapsed ovarian cancer. Furthermore, in OVA-301 patients with partially platinum-sensitive disease who received platinum therapy immediately after disease progression (n = 94), final median overall survival was improved by 9 months (p = 0.0153) in trabectedin-PLD patients compared with PLD alone. In addition to demonstrating a survival advantage, trabectedin-PLD may also allow the treatment of patients having not yet recovered from previous platinum toxicity. In summary, the data suggest the use of combined trabectedin-PLD as a second-line treatment option in patients with partially platinum-sensitive recurrent ovarian cancer, followed by a third-line platinum-containing regimen.

  5. Application of liposomal technologies for delivery of platinum analogs in oncology

    Directory of Open Access Journals (Sweden)

    Liu D

    2013-08-01

    Full Text Available Demin Liu1, Chunbai He1, Andrew Z Wang2, Wenbin Lin1 1Department of Chemistry, University of Chicago, Chicago, IL, USA; 2Laboratory of Nano- and Translational Medicine, Department of Radiation Oncology, and Lineberger Comprehensive Cancer Center, University of North Carolina School of Medicine, Chapel Hill, NC, USA Abstract: Platinum-based chemotherapy, such as cisplatin, oxaliplatin, and carboplatin, is one of the most widely utilized classes of cancer therapeutics. While highly effective, the clinical applications of platinum-based drugs are limited by their toxicity profiles as well as suboptimal pharmacokinetic properties. Therefore, one of the key research areas in oncology has been to develop novel platinum analog drugs and engineer new platinum drug formulations to improve the therapeutic ratio further. Such efforts have led to the development of platinum analogs including nedaplatin, heptaplatin, and lobaplatin. Moreover, reformulating platinum drugs using liposomes has resulted in the development of L-NDPP (Aroplatin™, SPI-77, Lipoplatin™, Lipoxal™, and LiPlaCis®. Liposomes possess several attractive biological activities, including biocompatibility, high drug loading, and improved pharmacokinetics, that are well suited for platinum drug delivery. In this review, we discuss the various platinum drugs and their delivery using liposome-based drug delivery vehicles. We compare and contrast the different liposome platforms as well as speculate on the future of platinum drug delivery research. Keywords: liposome, platinum analog, drug delivery, cancer

  6. PHASE Ⅱ STUDY OF GEMCITABINE COMBINED WITH PLATINUM CHEMOTHERAPY FOR RECURRENT EPITHELIAL OVARIAN CANCER

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective To evaluate the anti-tumor effect and toxicity of gemcitabine combined with platinum chemotherapy on recurrent epithelial ovarian cancer.Methods Phase Ⅱ study of gemcitabine combined with platinum chemotherapy was carried out in 22 patients with recurrent epithelial ovarian cancer. Median age of patients was 50. 5 years old. Seven patients were platinum-sensitive and 15 patients were platinum-resistant or -refractor. All patients received gemcitabine combined with carboplatin or oxaliplatin chemotherapy. Patients' response rate (RR) and toxicity of gemcitabine combined with platinum chemotherapy were evaluated.Results A total of 98 gemcitabine-based chemotherapy cycles were performed. Total RR was 36.4%, RR of platinum-sensitive patients was 4/7 and platinum-resistant and -refractory patients was 4/15. The estimated median survival time was 10. 0 months (95% CI: 7.0-13.0) after initiation of gemcitabine combined with platinum chemotherapy.There was no significant difference in survival time between platinum-resistant/refractory group and platinum-sensitive group (P = 0. 061 ). Side effects of gemcitabine combined with platinum chemotherapy were observed in 81.8 % of patients. Grade Ⅱ/Ⅲ anemia (54.5%) and grade Ⅲ/Ⅳ neutropenia (54.5%) were most common toxicities. Ten (45.5%) patients had to delay their chemotherapy cycles or reduce the dose of chemotherapeutic drugs because of the severe side effects. Fourteen (63.6%) patients received granulocyte colony-stimulating factor to relieve neutropenia,and 8 (36. 4% ) patients received component blood transfusion to treat anemia or thrombocytopenia. There was no treatment-associated death.Conclusion Gemcitabine combined with platinum chemotherapy appears to be an effective and well-tolerant treatment for recurrent epithelial ovarian cancer, including platinum-resistant or -refractory diseases.

  7. STABILITY OF THE NEW ANTICANCER PLATINUM ANALOG 1,2-DIAMINOMETHYL-CYCLOBUTANE-PLATINUM(II)-LACTATE (LOBAPLATIN-D19466) IN INTRAVENOUS SOLUTIONS

    NARCIS (Netherlands)

    GUCHELAAR, HJ; UGES, DRA; AULENBACHER, P; DEVRIES, EGE; MULDER, NH

    The chemical stability of the new anticancer platinum analogue 1,2-diaminomethyl-cyclobutane-platinum(II)-lactate (D19466) in infusion media was studied in an accelerated stability testing experiment with a selective HPLC-UV method. Variables were time, temperature, light, concentration, and

  8. Comparison of Intracellular Stress Response of NCI-H526 Small Cell Lung Cancer (SCLC) Cells to Platinum(II) Cisplatin and Platinum(IV) Oxoplatin

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Gerhard [Ludwig Boltzmann Cluster of Translational Oncology, A-1090 Vienna (Austria)

    2014-07-08

    In attempts to develop an orally applicable platinum-based drug, platinum(IV) drugs which exhibit higher in vivo stability compared to the platinum(II) drug cisplatin were formulated. The first such chemotherapeutic agent, namely satraplatin, failed to receive approval. In the present work, we checked the initial cellular stress response of the chemosensitive NCI-H526 small cell lung cancer (SCLC) cells by determination of the relative phosphorylation of 46 specific phosphorylation sites of 38 selected proteins in a six hours response to cisplatin (platinum(II)) or oxoplatin (platinum(IV)), respectively. Oxoplatin is considered as prodrug of cisplatin, although several findings point to differences in intracellular effects. Cisplatin induced hyperphosphorylation of p38α MAPK and AMPKα1, whereas oxoplatin treatment resulted in increased phosphorylation of a large number of signaling proteins involved in stress response/drug resistance, including JNK, GSK-3α, AMPKα1, src kinases, STATs, CHK-2 and especially focal adhesion kinase (FAK). Cisplatin exerts markedly higher cytotoxicity upon four hours short-term exposure in comparison to oxoplatin and, correspondingly, the extended initial stress response to the platinum(IV) drug oxoplatin thus is expected to increase clinical drug resistance. Induction of a substantial stress response to any prodrug of a platinum-based compound may likewise limit the effectivity of its active metabolite(s), such contributing to the failure of selected derivatized platinum complexes.

  9. Comparison of Intracellular Stress Response of NCI-H526 Small Cell Lung Cancer (SCLC Cells to Platinum(II Cisplatin and Platinum(IV Oxoplatin

    Directory of Open Access Journals (Sweden)

    Gerhard Hamilton

    2014-07-01

    Full Text Available In attempts to develop an orally applicable platinum-based drug, platinum(IV drugs which exhibit higher in vivo stability compared to the platinum(II drug cisplatin were formulated. The first such chemotherapeutic agent, namely satraplatin, failed to receive approval. In the present work, we checked the initial cellular stress response of the chemosensitive NCI-H526 small cell lung cancer (SCLC cells by determination of the relative phosphorylation of 46 specific phosphorylation sites of 38 selected proteins in a six hours response to cisplatin (platinum(II or oxoplatin (platinum(IV, respectively. Oxoplatin is considered as prodrug of cisplatin, although several findings point to differences in intracellular effects. Cisplatin induced hyperphosphorylation of p38α MAPK and AMPKα1, whereas oxoplatin treatment resulted in increased phosphorylation of a large number of signaling proteins involved in stress response/drug resistance, including JNK, GSK-3α, AMPKα1, src kinases, STATs, CHK-2 and especially focal adhesion kinase (FAK. Cisplatin exerts markedly higher cytotoxicity upon four hours short-term exposure in comparison to oxoplatin and, correspondingly, the extended initial stress response to the platinum(IV drug oxoplatin thus is expected to increase clinical drug resistance. Induction of a substantial stress response to any prodrug of a platinum-based compound may likewise limit the effectivity of its active metabolite(s, such contributing to the failure of selected derivatized platinum complexes.

  10. Platinum thickness dependence of the inverse spin-Hall voltage from spin pumping in a hybrid yttrium iron garnet/platinum system

    NARCIS (Netherlands)

    Castel, V.; Vlietstra, N.; Ben Youssef, J.; van Wees, B. J.

    2012-01-01

    We show the experimental observation of the platinum thickness dependence in a hybrid yttrium iron garnet/platinum system of the inverse spin-Hall effect from spin pumping, over a large frequency range and for different radio-frequency powers. From the measurement of the voltage at the resonant cond

  11. Recent Advances in Platinum (IV) Complex-Based Delivery Systems to Improve Platinum (II) Anticancer Therapy.

    Science.gov (United States)

    Han, Xiaopeng; Sun, Jin; Wang, Yongjun; He, Zhonggui

    2015-11-01

    Cisplatin and its platinum (Pt) (II) derivatives play a key role in the fight against various human cancers such as testicular, ovarian, head and neck, lung tumors. However, their application in clinic is limited due to dose- dependent toxicities and acquired drug resistances, which have prompted extensive research effort toward the development of more effective Pt (II) delivery strategies. The synthesis of Pt (IV) complex is one such an area of intense research fields, which involves their in vivo conversion into active Pt (II) molecules under the reducing intracellular environment, and has demonstrated encouraging preclinical and clinical outcomes. Compared with Pt (II) complexes, Pt (IV) complexes not only exhibit an increased stability and reduced side effects, but also facilitate the intravenous-to-oral switch in cancer chemotherapy. The overview briefly analyzes statuses of Pt (II) complex that are in clinical use, and then focuses on the development of Pt (IV) complexes. Finally, recent advances in Pt (IV) complexes in combination with nanocarriers are highlighted, addressing the shortcomings of Pt (IV) complexes, such as their instability in blood and irreversibly binding to plasma proteins and nonspecific distribution, and taking advantage of passive and active targeting effect to improve Pt (II) anticancer therapy. © 2015 Wiley Periodicals, Inc.

  12. TP53 status and taxane-platinum versus platinum-based therapy in ovarian cancer patients: A non-randomized retrospective study

    Directory of Open Access Journals (Sweden)

    Markowska Janina

    2008-01-01

    Full Text Available Abstract Background Taxane-platinum therapy (TP has replaced platinum-based therapy (PC or PAC, DNA damaging chemotherapy in the postoperative treatment of ovarian cancer patients; however, it is not always effective. TP53 protein plays a differential role in response to DNA-damaging agents and taxanes. We sought to define profiles of patients who benefit the most from TP and also of those who can be treated with PC. Methods We compared the effectiveness of PC/PAC (n = 253 and TP (n = 199 with respect to tumor TP53 accumulation in ovarian cancer patients with FIGO stage IIB-IV disease; this was a non-randomized retrospective study. Immunohistochemical analysis was performed on 452 archival tumors; univariate and multivariate analysis by the Cox's and logistic regression models was performed in all patients and in subgroups with [TP53(+] and without TP53 accumulation [TP53(-]. Results The advantage of taxane-platinum therapy over platinum-based therapy was seen in the TP53(+, and not in the TP53(- group. In the TP53(+ group taxane-platinum therapy enhanced the probability of complete remission (p = .018, platinum sensitivity (p = .014, platinum highly sensitive response (p = .038 and longer survival (OS, p = .008. Poor tumor differentiation diminished the advantage from taxane-platinum therapy in the TP53(+ group. In the TP53(- group PC/PAC was at least equally efficient as taxane-platinum therapy and it enhanced the chance of platinum highly sensitive response (p = .010. However, in the TP53(- group taxane-platinum therapy possibly diminished the risk of death in patients over 53 yrs (p = .077. Among factors that positively interacted with taxane-platinum therapy in some analyses were endometrioid and clear cell type, FIGO III stage, bulky residual tumor, more advanced age of patient and moderate tumor differentiation. Conclusion Our results suggest that taxane-platinum therapy is particularly justified in patients with TP53(+ tumors or older

  13. Patterning of platinum (Pt) thin films by chemical wet etching in Aqua Regia

    Science.gov (United States)

    Köllensperger, P. A.; Karl, W. J.; Ahmad, M. M.; Pike, W. T.; Green, M.

    2012-06-01

    The chemical and physical properties of platinum (Pt) make it a useful material for microelectromechanical systems and microfluidic applications such as lab-on-a-chip devices. Platinum thin-films are frequently employed in applications where electrodes with high chemical stability, low electrical resistance or a high melting point are needed. Due to its chemical inertness it is however also one of the most difficult metals to pattern. The gold standard for patterning is chlorine RIE etching, a capital-intensive process not available in all labs. Here we present simple fabrication protocols for wet etching Pt thin-films in hot Aqua Regia based on sputtered Ti/Pt/Cr and Cr/Pt/Cr metal multilayers. Chromium (Cr) or titanium (Ti) is used as an adhesion layer for the Pt. Cr is used as a hard masking layer during the Pt etch as it can be easily and accurately patterned with photoresist and withstands the Aqua Regia. The Cr pattern is transferred into the Pt and the Cr mask later removed. Only standard chemicals and cleanroom equipment/tools are required. Prior to the Aqua Regia etch any surface passivation on the Pt is needs to be removed. This is usually achieved by a quick dip in dilute hydrofluoric acid (HF). HF is usually also used for wet-etching the Ti adhesion layer. We avoid the use of HF for both steps by replacing the HF-dip with an argon (Ar) plasma treatment and etching the Ti layer with a hydrogen peroxide (H2O2) based etchant.

  14. A novel platinum chromium everolimus-eluting stent for the treatment of coronary artery disease

    Directory of Open Access Journals (Sweden)

    Bennett J

    2013-06-01

    Full Text Available Johan Bennett, Christophe DuboisDepartment of Cardiovascular Diseases, University Hospitals Leuven, Leuven, BelgiumAbstract: The development of coronary stents represents a major step forward in the treatment of obstructive coronary artery disease since the introduction of percutaneous coronary intervention. The initial enthusiasm for bare metal stents was, however, tempered by a significant incidence of in-stent restenosis, the manifestation of excessive neointima hyperplasia within the stented vessel segment, ultimately leading to target vessel revascularization. Later, drug-eluting stents, with controlled local release of antiproliferative agents, consistently reduced this need for repeat revascularization. In turn, the long-term safety of first-generation drug-eluting stents was brought into question with the observation of an increased incidence of late stent thrombosis, often presenting as myocardial infarction or sudden death. Since then, new drugs, polymers, and platforms for drug elution have been developed to improve stent safety and preserve efficacy. Development of a novel platinum chromium alloy with high radial strength and high radiopacity has enabled the design of a new, thin-strut, flexible, and highly trackable stent platform, while simultaneously improving stent visibility. Significant advances in polymer coating, serving as a drug carrier on the stent surface, and in antiproliferative agent technology have further improved the safety and clinical performance of newer-generation drug-eluting stents. This review will provide an overview of the novel platinum chromium everolimus-eluting stents that are currently available. The clinical data from major clinical trials with these devices will be summarized and put into perspective.Keywords: drug-eluting stent, restenosis, Promus Element, Synergy

  15. Microfluidic Device

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

    2017-01-01

    Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

  16. Platinum recycling going green via induced surface potential alteration enabling fast and efficient dissolution

    Science.gov (United States)

    Hodnik, Nejc; Baldizzone, Claudio; Polymeros, George; Geiger, Simon; Grote, Jan-Philipp; Cherevko, Serhiy; Mingers, Andrea; Zeradjanin, Aleksandar; Mayrhofer, Karl J. J.

    2016-01-01

    The recycling of precious metals, for example, platinum, is an essential aspect of sustainability for the modern industry and energy sectors. However, due to its resistance to corrosion, platinum-leaching techniques rely on high reagent consumption and hazardous processes, for example, boiling aqua regia; a mixture of concentrated nitric and hydrochloric acid. Here we demonstrate that complete dissolution of metallic platinum can be achieved by induced surface potential alteration, an ‘electrode-less' process utilizing alternatively oxidative and reductive gases. This concept for platinum recycling exploits the so-called transient dissolution mechanism, triggered by a repetitive change in platinum surface oxidation state, without using any external electric current or electrodes. The effective performance in non-toxic low-concentrated acid and at room temperature is a strong benefit of this approach, potentially rendering recycling of industrial catalysts, including but not limited to platinum-based systems, more sustainable. PMID:27767178

  17. Platinum recycling going green via induced surface potential alteration enabling fast and efficient dissolution

    Science.gov (United States)

    Hodnik, Nejc; Baldizzone, Claudio; Polymeros, George; Geiger, Simon; Grote, Jan-Philipp; Cherevko, Serhiy; Mingers, Andrea; Zeradjanin, Aleksandar; Mayrhofer, Karl J. J.

    2016-10-01

    The recycling of precious metals, for example, platinum, is an essential aspect of sustainability for the modern industry and energy sectors. However, due to its resistance to corrosion, platinum-leaching techniques rely on high reagent consumption and hazardous processes, for example, boiling aqua regia; a mixture of concentrated nitric and hydrochloric acid. Here we demonstrate that complete dissolution of metallic platinum can be achieved by induced surface potential alteration, an `electrode-less' process utilizing alternatively oxidative and reductive gases. This concept for platinum recycling exploits the so-called transient dissolution mechanism, triggered by a repetitive change in platinum surface oxidation state, without using any external electric current or electrodes. The effective performance in non-toxic low-concentrated acid and at room temperature is a strong benefit of this approach, potentially rendering recycling of industrial catalysts, including but not limited to platinum-based systems, more sustainable.

  18. Tuning the activity of platinum(IV) anticancer complexes through asymmetric acylation.

    Science.gov (United States)

    Chin, Chee Fei; Tian, Quan; Setyawati, Magdiel Inggrid; Fang, Wanru; Tan, Emelyn Sue Qing; Leong, David Tai; Ang, Wee Han

    2012-09-13

    Platinum(II) anticancer drug cisplatin is one of the most important chemotherapeutic agents in clinical use but is limited by its high toxicity and severe side effects. Platinum(IV) anticancer prodrugs can overcome these limitations by resisting premature aquation and binding to essential plasma proteins. Structure-activity relationship studies revealed a link between the efficacy of platinum(IV) complexes with the nature of their axial ligands, which can be modified to enhance the properties of the prodrug. The existing paradigm of employing platinum(IV) complexes with symmetrical axial carboxylate ligands does not fully exploit their vast potential. A new approach was conceived to control properties of platinum(IV) prodrugs using contrasting axial ligands via sequential acylation. We report a novel class of asymmetric platinum(IV) carboxylates based on the cisplatin template containing both hydrophilic and lipophilic ligands on the same scaffold designed to improve their aqueous properties and enhance their efficacy against cancer cells in vitro.

  19. Platinum overlayers on Co(0001) and Ni(111): numerical simulation of surface alloying

    Science.gov (United States)

    Légaré, P.; Cabeza, G. F.; Castellani, N. J.

    1999-11-01

    The surface alloying of one and two monolayers (ML) of platinum deposited on Ni(111) and Co(0001) were studied by means of the ECT-BFS method. The 1 ML deposit appears to be very stable on both substrates. Platinum can diffuse at high temperature only, the large activation barrier being represented by the first substrate layer. On the contrary, the stability of the 2 ML deposit is poor so that alloying is easily obtained. In both cases, the platinum diffusion produces metastable states. The lowest-energy states exhibit a propensity for platinum dilution in a limited region below the surface. The initial platinum thickness determines not only the features of the alloyed region, but also the surface concentration. The surface alloys have features qualitatively similar to those reported for the (111) surface of bulk Pt-Ni and Pt-Co alloys: a platinum-rich surface and oscillating concentration profiles.

  20. Morphology of Platinum Nanowire Array Electrodeposited Within Anodic Aluminium Oxide Template Characterized by Atomic Force Microscopy

    Institute of Scientific and Technical Information of China (English)

    孔令斌; 陆梅; 李梦轲; 郭新勇; 力虎林

    2003-01-01

    Uniform platinum nanowires were synthesized by electrodepositing the platinum under a very low altering current frequency (20Hz) and increasing voltage (5-15 V) in the pores of anodic aluminium oxide (AAO) template.Atomic force microscopy observation indicates that the template membranes we obtained have hexagonally closepacked nanochannels. The platinum nanowires have highly ordered arrays after partially dissolving the aluminium oxide membrane. With the increasing dissolving time, the platinum nanowire array collapsed. A concave topography of the aluminium substrate was observed after the aluminium oxide membrane was dissolved completely and the platinum nanowires were released from the template. Platinum nanowires were also characterized by transmission electron microscopy and the phase structure of the Al/AAO/Pt composite was proven by x-ray diffraction.

  1. Platinum Migration at the Pt/YSZ Interface

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Jacobsen, Torben

    2006-01-01

    by potential sweep, step and impedance techniques. As expected, inductive behaviour and activation during step polarization is confirmed, but furthermore, a very accentuated noise pattern is seen during cathodic step polarization. Investigation of the YSZ and Pt surfaces afterwards reveals the growth......Electrode activation, inductive hysteresis and non-linearity are well known phenomena on Pt-YSZ electrodes, and recently also regular fluctuation patterns have been reported. The oxygen electrode on YSZ surfaces is studied at Pt micro-electrodes prepared by electrochemical etching of platinum wire...... of dendrite like Pt structures from the TPB. The formation of these may explain the observed noise and contribute to the explanation of the activation mechanism taking place at the platinum-YSZ interface....

  2. Nanostructured gold and platinum electrodes on silicon structures for biosensing

    Science.gov (United States)

    Ogurtsov, V. I.; Sheehan, M. M.

    2005-01-01

    Gold and platinum metal electrodes on Si/SiO2 having undergone anisotropic potassium hydroxide (KOH) etch treatment are considered. This treatment etches at different rates and directions in the material resulting in creation of numerous pyramid shaped holes in the silicon substrate. This surface is used to make metal electrodes with increased electrode efficiency. The electrodes can serve as the sensors or as the sensor substrates (for surface polymer modification) and because both gold and platinum are inert they have applications for food safety biosensing. Wine, an economically significant food product, was chosen as a matrix, and impedance spectroscopy (EIS) was selected as a method of investigation of electrode behaviour. Based on results of EIS, different complexity equivalent circuits were determined by applying fitting mean square root optimisation of sensor complex impedance measurements.

  3. Hollow platinum alloy tailored counter electrodes for photovoltaic applications

    Science.gov (United States)

    Li, Pinjiang; Zhang, Yange; Fa, Wenjun; Yang, Xiaogang; Wang, Liang

    2017-08-01

    Without sacrifice of photovoltaic performances, low-platinum alloy counter electrodes (CEs) are promising in bringing down the fabrication cost of dye-sensitized solar cells (DSSCs). We present here the realization of ZnO nanostructure assisted hollow platinum-nickel (PtNi) alloy microstructure CEs with a simple hydrothermal methods and maximization of electrocatalytic behaviors by tuning Zn precursors. The maximal power conversion efficiency is up to 8.74% for the liquid-junction dye-sensitized solar cells with alloyed PtNi0.41 electrode, yielding a 37.6% cell efficiency enhancement in comparison with pristine solar cell from planar Pt electrode. Moreover, the dissolution-resistant and charge-transfer abilities toward I-/I3- redox electrolyte have also been markedly enhanced due to competitive dissolution reactions and alloying effects.

  4. The extractive metallurgy of south africa's platinum ores

    Science.gov (United States)

    Cramer, Larry A.

    2001-10-01

    The extraction technology for platinum-group metals (PGMs) has changed dramatically in the last 80 years, and the changes are likely to continue for years to come. This article will review advances in PGM extraction, including developments in semi-autogenous and fully autogenous milling; flotation equipment applications for treating high-chrome ores; increases in power densities for future smelting furnaces, and new methods for meeting rising environmental standards.

  5. Phase I trials of WR-2721 and cis-platinum

    Energy Technology Data Exchange (ETDEWEB)

    Glover, D.; Glick, J.H.; Weiler, C.; Yuhas, J.; Kligerman, M.M.

    1984-09-01

    WR-2721 is a sulfhydryl compound which in the animal model improves renal tolerance to cis-platinum (DDP) by factors of 1.3 to 1.7. Phase I trials were initiated to establish the toxicity and dose modification factor when WR-2721 was given prior to escalating doses of DDP. Nineteen patients received 27 courses of WR-2721 (450-910 mg/m/sup 2/) 20 minutes prior to DDP (50-120 mg/m/sup 2/). Mild, transient nephrotoxicity was observed in only 2 of 15 courses of DDP 80-100 mg/m/sup 2/ when WR-2721 was given prior to DDP. Although 5 of 9 patients treated with WR-2721 prior to 120 mg/m/sup 2/ of DDP developed transient nephrotoxicity, their serum creatinines returned to normal baseline values within 1 to 2 weeks. Thirty-four courses of WR-2721 (740 mg/m/sup 2/) prior to DDP 120-150 mg/m/sup 2/ with mannitol diuresis were administered. Biweekly serum creatinine and monthly creatinine clearances have remained normal in all patients treated with 120 mg/m/sup 2/ of platinum and WR-2721. Four of 10 patients treated with 150 mg/m/sup 2/ of cis-platinum experienced transient nephrotoxicity 5-7 days after treatment. Mild ototoxicity was noted in 4 patients following 150 mg/m/sup 2/ of DDP. WR-2721 does not appear to protect against the antitumor efficacy of DDP. Compared to retrospective series, our data suggest that WR-2721 may provide some protection against platinum-induced nephrotoxicity, but the dose modification factors remain to be established.

  6. Experimental Studies on Thermal and Electrical Properties of Platinum Nanofilms

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xing; ZHANG Qing-Guang; CAO Bing-Yang; FUJII Motoo; TAKAHASHI Koji; IKUTA Tatsuya

    2006-01-01

    @@ We experimentally studied the in-plane thermal and electrical properties of a suspended platinum nanofilm in thickness of 15 nm. The measured results show that the in-plane thermal conductivity, the electrical conductivity and the resistance-temperature coefficient of the studied nanofilm are much less than those of the bulk material,while the Lorenz number is greater than the bulk value.

  7. Stabilization of 200-atom platinum nanoparticles by organosilane fragments

    KAUST Repository

    Pelzer, Katrin

    2011-04-19

    Three\\'s a charm: Platinum nanoparticles of 2 nm diameter and containing approximately 200 atoms covered with n-octylsilyl groups (see picture, right; Pt blue, Si red, C gray, H turquoise) form when [Pt(dba)2] (dba=dibenzylideneacetone) decomposes in the presence of n-octylsilane. The particles adopt a cuboctahedral structure with an edge length of three atoms. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Treatment of pulmonary arteriovenous malformation using platinum coils: case report

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Man Deuk; Kim, Jeung Sook; Lim, Chang Young [College of Medicine, Pochon CHA University, Pochon (China)

    2005-07-15

    Pulmonary arteriovenous malformation (PAVM) is an abnormal direct communication between the pulmonary arteries and veins without any capillary network. The patients may be completely asymptomatic or may they develop serious complications including hemoptysis and brain abscess. We present here a case of incidentally found PAVM in a 33-year-old male who underwent embolization using platinum coils. Coil embolization is a safe, highly effective procedure that should be considered more often for the treatment of PAVM.

  9. Platinum(II) complexes as spectroscopic probes for biomolecules

    Energy Technology Data Exchange (ETDEWEB)

    Ratilla, E.

    1990-09-21

    The use of platinum(II) complexes as tags and probes for biomolecules is indeed advantageous for their reactivities can be selective for certain purposes through an interplay of mild reaction conditions and of the ligands bound to the platinum. The use of {sup 195}Pt NMR as a method of detecting platinum and its interactions with biomolecules was carried out with the simplest model of platinum(II) tagging to proteins. Variable-temperature {sup 195}Pt NMR spectroscopy proved useful in studying the stereodynamics of complex thioethers like methionine. The complex, Pt(trpy)Cl{sup +}, with its chromophore has a greater potential for probing proteins. It is a noninvasive and selective tag for histidine and cysteine residues on the surface of cytochrome c at pH 5. The protein derivatives obtained are separable, and the tags are easily quantitated and differentiated through the metal-to-ligand charge transfer bands which are sensitive to the environment of the tag. Increasing the pH to 7.0 led to the modification by Pt(trpy)Cl{sup +}of Arg 91 in cytochrome c. Further studies with guanidine-containing ligands as models for arginine modification by Pt(trpy)Cl{sup +} showed that guanidine can act as a terminal ligand and as a bridging ligand. Owing to the potential utility of Pt(trpy)L{sup n+} as electron dense probes of nucleic acid structure, interactions of this bis-Pt(trpy){sup 2+} complex with nucleic acids was evaluated. Indeed, the complex interacts non-covalently with nucleic acids. Its interactions with DNA are not exactly the same as those of its precedents. Most striking is its ability to form highly immobile bands of DNA upon gel electrophoresis. 232 refs.

  10. Modification of platinum surfaces by spontaneous deposition: Methanol oxidation electrocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    MacDonald, J.P.; Gualtieri, B.; Runga, N.; Teliz, E.; Zinola, C.F. [Fundamental Electrochemistry Laboratory, School of Sciences, Universidad de la Republica, Igua Street No. 4225, CP 11400, Montevideo (Uruguay)

    2008-12-15

    The presence of a second metal on platinum surfaces affects the performance of methanol oxidation. However, most of the electrocatalytic reactions are studied by using electrochemically deposited platinum alloys, but in the case of spontaneous deposition the situation is not so clear since the surface distribution, stability and morphology are usually not well documented. The formation of surface decorated samples on mono- and poly-crystalline platinum is followed by electrochemical and spectroscopic techniques and analysis of their performance towards methanol adsorption and oxidation compared with that on pure platinum. Pt/Sn and Pt/Ru are of special interest because of their well-known performance in methanol fuel cells. Methanol oxidation on Pt(111)/Ru, Pt(111)/Sn and Pt(111) shows that ruthenium is the only one able to promote the reaction since the simultaneous dissolution of tin occurs and competes with the process of interest. The in situ infrared spectroscopy is used to compare methanol oxidation on Pt(111)/Ru and Pt(111) in acid media using p-polarized light. The formation of bridge bound carbon monoxide is inhibited in the presence of ruthenium ad-species, whereas on Pt(111) the three adsorption configurations are observed. Linear sweep polarization curves and Tafel slopes (calculated from steady state potentiostatic plots) for methanol oxidation are compared on polycrystalline surfaces modified by tin or ruthenium at different coverages. There is almost no change in the Tafel slopes due to the presence of the foreign metal except for Pt/Ru, where a 0.09 V decade{sup -1} slope was calculated below 0.55 V due to hydroxyl adsorbates on ruthenium islands. The anodic stripping of methanol residues on the three surfaces indicates a lower amount of carbon monoxide-type adsorbates on Pt/Ru, and the simultaneous tin dissolution process leading to residues oxidation on Pt/Sn electrodes. (author)

  11. Mechanistic basis for overcoming platinum resistance using copper chelating agents.

    Science.gov (United States)

    Liang, Zheng D; Long, Yan; Tsai, Wen-Bin; Fu, Siqing; Kurzrock, Razelle; Gagea-Iurascu, Mihai; Zhang, Fan; Chen, Helen H W; Hennessy, Bryan T; Mills, Gordon B; Savaraj, Niramol; Kuo, Macus Tien

    2012-11-01

    Platinum-based antitumor agents are widely used in cancer chemotherapy. Drug resistance is a major obstacle to the successful use of these agents because once drug resistance develops, other effective treatment options are limited. Recently, we conducted a clinical trial using a copper-lowering agent to overcome platinum drug resistance in ovarian cancer patients and the preliminary results are encouraging. In supporting this clinical study, using three pairs of cisplatin (cDDP)-resistant cell lines and two ovarian cancer cell lines derived from patients who had failed in platinum-based chemotherapy, we showed that cDDP resistance associated with reduced expression of the high-affinity copper transporter (hCtr1), which is also a cDDP transporter, can be preferentially resensitized by copper-lowering agents because of enhanced hCtr1 expression, as compared with their drug-sensitive counterparts. Such a preferential induction of hCtr1 expression in cDDP-resistant variants by copper chelation can be explained by the mammalian copper homeostasis regulatory mechanism. Enhanced cell-killing efficacy by a copper-lowering agent was also observed in animal xenografts bearing cDDP-resistant cells. Finally, by analyzing a public gene expression dataset, we found that ovarian cancer patients with elevated levels of hCtr1 in their tumors, but not ATP7A and ATP7B, had more favorable outcomes after platinum drug treatment than those expressing low hCtr1 levels. This study reveals the mechanistic basis for using copper chelation to overcome cDDP resistance in clinical investigations.

  12. Characterisation of carbon nanotubes decorated with platinum nanoparticles

    OpenAIRE

    M. Pawlyta; D. Łukowiec; A.D. Dobrzańska-Danikiewicz

    2012-01-01

    Purpose: In presented work results of synthesis of carbon nanotubes decorated with platinum nanoparticles by organic colloidal process as an example of direct formation of nanoparticles onto CNTs are reported.Design/methodology/approach: Powder XRD and transmission electron microscopy were used for characterisation of the morphology of composite as well as the distribution of nanocrystals on the CNTs surfaces.Findings: TEM results confirm that CNT were homogeneous and clean, without any admix...

  13. A Single Platinum Microelectrode for Identifying Soft Drink Samples

    OpenAIRE

    Lígia Bueno; Thiago R. L. C. Paixão

    2012-01-01

    Cyclic voltammograms recorded with a single platinum microelectrode were used along with a non-supervised pattern recognition, namely, Principal Component Analysis, to conduct a qualitative analysis of sixteen different brands of carbonated soft drinks (Kuat, Soda Antarctica, H2OH!, Sprite 2.0, Guarana Antarctica, Guarana Antarctica Zero, Coca-Cola, Coca-Cola Zero, Coca-Cola Plus, Pepsi, Pepsi Light, Pepsi Twist, Pepsi Twist Light, Pepsi Twist 3, Schin Cola, and Classic Dillar’s). In this ana...

  14. Determination of Platinum Metals in Carbonaceous Mineral Raw Materials by Stripping Voltammetry

    OpenAIRE

    Kolpakova, Nina Alexandrovna; Oskina, Yuliya Aleksandrovna; Dyachenko, Elena Nikolaevna; Pshenichkin, Anatoliy Yakovlevich

    2015-01-01

    The paper considers the possibility of determining platinum metals in mineral raw materials by stripping voltammetry on a graphite electrode modified by metals. Stripping voltammetry method is characterized by low determination limit, wide intervals of determined content and high sensitivity. As a result of the research the conditions for the determination of gold, platinum and palladium by stripping voltammetry have been selected. The comparison of the results of gold, palladium and platinum...

  15. Lowering the resistivity of polyacrylate ion-selective membranes by platinum nanoparticles addition.

    Science.gov (United States)

    Jaworska, Ewa; Kisiel, Anna; Maksymiuk, Krzysztof; Michalska, Agata

    2011-01-01

    The effect of platinum nanoparticles introduction into polyacrylate membranes was examined. Platinum nanoparticles were added to the membrane cocktail before photopolymerization of the poly(n-butyl acrylate) based ion-selective membranes. Thus obtained sensors were characterized with significantly lowered electrical resistance and increased stability of potential readings compared to classical poly(n-butyl acrylate) membranes. The analytical parameters of platinum nanoparticle containing membranes were well comparable with those of classical membranes.

  16. Elaboration and Properties of Nanocomposite Structures Based on Crown Modified Platinum Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    H.Perez; S.Cavaliere-jaricot; P-A.Albouy; A.Etcheberry

    2007-01-01

    1 Results This paper presents the development of platinum nanocomposites structures based on organically modified c.a.2 nm core platinum nanoparticles.The chemical modification of the 4-mercaptoaniline functionalized particles by various in coming molecules is evidenced and precisely quantified.The particles can be dissolved like molecules in various solvents depending on the features of the new crown and X-rays shows that the interparticle distance is affected by the crown modification.These platinum n...

  17. Platinum-induced structural collapse in layered oxide polycrystalline films

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jianlin; Liu, Changhui [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Huang, Haoliang [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Fu, Zhengping; Peng, Ranran, E-mail: pengrr@ustc.edu.cn, E-mail: yllu@ustc.edu.cn [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Zhai, Xiaofang [Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Lu, Yalin, E-mail: pengrr@ustc.edu.cn, E-mail: yllu@ustc.edu.cn [CAS Key Laboratory of Materials for Energy Conversion, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei 230026 (China); Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026 (China); Laser and Optics Research Center, Department of Physics, United States Air Force Academy, Colorado 80840 (United States)

    2015-03-30

    Effect of a platinum bottom electrode on the SrBi{sub 5}Fe{sub 1−x}Co{sub x}Ti{sub 4}O{sub 18} layered oxide polycrystalline films was systematically studied. The doped cobalt ions react with the platinum to form a secondary phase of PtCoO{sub 2}, which has a typical Delafossite structure with a weak antiferromagnetism and an exceptionally high in-plane electrical conductivity. Formation of PtCoO{sub 2} at the interface partially consumes the cobalt dopant and leads to the structural collapsing from 5 to 4 layers, which was confirmed by X-ray diffraction and high resolution transmission electron microscopy measurements. Considering the weak magnetic contribution from PtCoO{sub 2}, the observed ferromagnetism should be intrinsic of the Aurivillius compounds. Ferroelectric properties were also indicated by the piezoresponse force microscopy. In this work, the platinum induced secondary phase at the interface was observed, which has a strong impact on Aurivillius structural configuration and thus the ferromagnetic and ferroelectric properties.

  18. Organo-platinum complexes as antitumor agents (review).

    Science.gov (United States)

    Hill, J M; Speer, R J

    1982-01-01

    Rosenberg et al discovered in the coordination complexes of platinum a new, novel type of potential antitumor agent. Cisplatin [cis-dichlorodiammine platinum (II)4 proved active against a variety of rodent tumors and acted synergistically when combined with other chemotherapeutic agents. Initial clinical tests by Hill et al in 1971, showed cisplatin to be active against malignant lymphoma, Hodgkin's disease, and certain other malignancies. Significant nephrotoxicity, nausea, and vomiting were noted. Since then, cisplatin has been tested alone and in combination chemotherapy and has proven an efficacious anticancer agent in squamous cell carcinoma of head and neck, ovarian carcinoma, disseminated testicular cancer, and others. Its therapeutic value was acknowledged when approved in 1978 by the U.S. FDA for treatment of the latter cancer. The current clinical literature indicates clearly that the full potential of this drug has not yet been realized. Hydration and diuresis have served to mitigate much of the nephrotoxicity, while significant strides toward amelioration of the nausea and vomiting have also been achieved. Literally, thousands of chemically-related congeners have been synthesized, and many have shown marked potency against rodent tumors. Very few, however, have been evaluated clinically, vis-a-vis malonato trans(-)-1,2-diaminocyclohexane platinum(II); this appears a most promising and fertile area of future investigation.

  19. Upper eyelid platinum chain placement for treating paralytic lagophthalmos.

    Science.gov (United States)

    Bianchi, B; Ferri, A; Leporati, M; Ferrari, S; Lanfranco, D; Ferri, T; Sesenna, E

    2014-12-01

    For the definitive treatment of lagophthalmos and satisfactory rehabilitation of the affected eye, different surgical strategies have been proposed, including static or dynamic procedures. Although some of these can have good results, lid loading is now the most common technique for treating paralytic long-term lagophthalmos. Among the different types of loading, the use of a platinum chain is preferred to the use of a standard gold weight because platinum has a higher density than gold and is also more biocompatible. In this paper authors retrospectively analyzed 43 patients with regards to functional and cosmetic results. Questionnaires were also employed to assess changes and improvements in the patients' quality of life. Analysis of the excellent results achieved confirmed that platinum chain lid loading should be considered as a first-line treatment for paralytic lagophthalmos rehabilitation. It is a simple, reliable, and effective technique that significantly improves the health-related quality of life of patients. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

  20. First platinum moderated positron beam based on neutron capture

    CERN Document Server

    Hugenschmidt, C; Repper, R; Schreckenbach, K; Sperr, P; Triftshaeuser, W

    2002-01-01

    A positron beam based on absorption of high energy prompt gamma-rays from thermal neutron capture in sup 1 sup 1 sup 3 Cd was installed at a neutron guide of the high flux reactor at the ILL in Grenoble. Measurements were performed for various source geometries, dependent on converter mass, moderator surface and extraction voltages. The results lead to an optimised design of the in-pile positron source which will be implemented at the Munich research reactor FRM-II. The positron source consists of platinum foils acting as gamma-e sup + e sup - -converter and positron moderator. Due to the negative positron work function moderation in heated platinum leads to emission of monoenergetic positrons. The positron work function of polycrystalline platinum was determined to 1.95(5) eV. After acceleration to several keV by four electrical lenses the beam was magnetically guided in a solenoid field of 7.5 mT leading to a NaI-detector in order to detect the 511 keV gamma-radiation of the annihilating positrons. The posi...

  1. Optoelectronic method for determining platinum in biological products

    Science.gov (United States)

    Radu, Simona; Ionicǎ, Mihai; Macovei, Radu Alexandru; Caragea, Genica; Forje, Mǎrgǎrita; Grecu, Iulia; Vlǎdescu, Marian; Viscol, Oana

    2016-12-01

    Of all platinum metals, platinum has the most uses and it's the most abundant and most easily to be processed. Its use in auto catalysts results in environmental contamination of crowded cities and high-traffic roads. In medicine, Pt is used as a cytostatic drug. In order to study the degree of contamination of the population with Pt or the correctness of treatment with Pt, it has been developed a method for its determination from urine or blood samples with a system Graphite Furnance - Atomic Absorption Spectrometer, (GF-AAS) Varian. There are presented the methods of sampling processing for blood or urine that followed the digest of the organic matrix. In the determination of the operating parameters for the system GF-AAS, was aimed the reducing of the nonanatomic absorbance by optimizing the drying temperatures, the calcination and atomization temperatures and the removal of the nonanatomic absorbance with D2 lamp. As a result of the use of the method are presented the concentrations of Pt in the blood or urine of a group of patients in Bucharest, a city with heavy traffic of vehicles. GF-AAS method presented is sensitive, reproducible, and relatively easy to apply with an acceptable cost. With this method, the concentration of Pt can be determined from blood and urine, both in order to establish the degree of contamination with Pt and for monitoring cancer therapy with platinum compounds.

  2. Porous platinum-based catalysts for oxygen reduction

    Science.gov (United States)

    Erlebacher, Jonah D; Snyder, Joshua D

    2014-11-25

    A porous metal that comprises platinum and has a specific surface area that is greater than 5 m.sup.2/g and less than 75 m.sup.2/g. A fuel cell includes a first electrode, a second electrode spaced apart from the first electrode, and an electrolyte arranged between the first and the second electrodes. At least one of the first and second electrodes is coated with a porous metal catalyst for oxygen reduction, and the porous metal catalyst comprises platinum and has a specific surface area that is greater than 5 m.sup.2/g and less than 75 m.sup.2/g. A method of producing a porous metal according to an embodiment of the current invention includes producing an alloy consisting essentially of platinum and nickel according to the formula Pt.sub.xNi.sub.1-x, where x is at least 0.01 and less than 0.3; and dealloying the alloy in a substantially pH neutral solution to reduce an amount of nickel in the alloy to produce the porous metal.

  3. In vitro permeation of platinum through African and Caucasian skin.

    Science.gov (United States)

    Franken, A; Eloff, F C; du Plessis, J; Badenhorst, C J; Du Plessis, J L

    2015-02-03

    The majority of the South African workforce are Africans, therefore potential racial differences should be considered in risk and exposure assessments in the workplace. Literature suggests African skin to be a superior barrier against permeation and irritants. Previous in vitro studies on metals only included skin from Caucasian donors, whereas this study compared the permeation of platinum through African and Caucasian skin. A donor solution of 0.3 mg/ml of potassium tetrachloroplatinate (K₂PtCl₄) dissolved in synthetic sweat was applied to the vertical Franz diffusion cells with full thickness abdominal skin. Skin from three female African and three female Caucasian donors were included (n=21). The receptor solution was removed at various intervals during the 24 h experiment, and analysed with high resolution inductively coupled plasma-mass spectrometry (ICP-MS). Skin was digested and analysed by inductively coupled plasma-optical emission spectrometry (ICP-OES). Significantly higher permeation of platinum through intact African skin (p=0.044), as well as a significantly higher mass of platinum retention in African skin in comparison with Caucasian skin (p=0.002) occurred. Significant inter-donor variation was found in both racial groups (pplatinum salts. These results are contradictory to limited literature suggesting a superior barrier in African skin and further investigation is necessary to explain the higher permeation through African skin.

  4. A Single Platinum Microelectrode for Identifying Soft Drink Samples

    Directory of Open Access Journals (Sweden)

    Lígia Bueno

    2012-01-01

    Full Text Available Cyclic voltammograms recorded with a single platinum microelectrode were used along with a non-supervised pattern recognition, namely, Principal Component Analysis, to conduct a qualitative analysis of sixteen different brands of carbonated soft drinks (Kuat, Soda Antarctica, H2OH!, Sprite 2.0, Guarana Antarctica, Guarana Antarctica Zero, Coca-Cola, Coca-Cola Zero, Coca-Cola Plus, Pepsi, Pepsi Light, Pepsi Twist, Pepsi Twist Light, Pepsi Twist 3, Schin Cola, and Classic Dillar’s. In this analysis, soft drink samples were not subjected to pre-treatment. Good differentiation among all the analysed soft drinks was achieved using the voltammetric data. An analysis of the loading plots shows that the potentials of −0.65 V, −0.4 V, 0.4 V, and 0.750 V facilitated the discrimination process. The electrochemical processes related to this potential are the reduction of hydrogen ions and inhibition of the platinum oxidation by the caffeine adsorption on the electrode surface. Additionally, the single platinum microelectrode was useful for the quality control of the soft drink samples, as it helped to identify the time at which the beverage was opened.

  5. Global exploration and production capacity for platinum-group metals from 1995 through 2015

    Science.gov (United States)

    Wilburn, David R.

    2012-01-01

    technological factors affecting exploration for and development of copper and nickel, as well as factors affecting the PGM industry. The recovery of PGMs from mill tailings since 2004 and the recycling of PGMs from catalytic converters, electrical components, and jewelry has increased since 1995 so that recycled PGMs recovered from these products accounted for about 30 percent of the supply of platinum worldwide and 29 percent of the supply of palladium worldwide in 2010. Economic and geopolitical conditions have influenced PGM supply and demand. The global recession of 2008 and 2009 temporarily decreased demand for PGMs and constrained PGM mine exploration and development, at least through 2010. Legislation regulating the structure of the mining sector has affected mining in Russia, South Africa, and Zimbabwe. Stricter vehicle emissions standards in established markets since the 1980s have led to mandatory use of pollution control devices, such as catalytic converters, that contain PGMs and are required on vehicles in expanding markets, such as China and India. It is expected that South Africa, Russia, Canada, and Zimbabwe will continue to be the principal sources of PGM at least for the next decade. Based on this review of the PGM industry, the world’s platinum capacity, expressed in terms of recoverable platinum metal, increased from 1995 through 2010 by 77,000 kilograms (kg) in South Africa, 9,000 kg in Zimbabwe, 6,000 kg in Russia, 2,000 kg in Botswana, and 2,000 kg in Canada. For the same period, palladium capacity worldwide increased by 44,000 kg in South Africa, 22,000 kg in Russia, 8,000 kg in Canada, 8,000 kg in the United States, 7,000 kg in Zimbabwe, and 3,000 kg in Botswana. Platinum capacity worldwide is expected to further increase by 24,000 kg in South Africa, 9,000 kg in Russia, 3,000 kg in Canada, and 2,000 kg in Zimbabwe from 2011 through 2015. Palladium capacity worldwide is likewise expected to increase an additional 16,000 kg in Russia, 14,000 kg in

  6. Global exploration and production capacity for platinum-group metals from 1995 through 2015

    Science.gov (United States)

    Wilburn, David R.

    2012-01-01

    technological factors affecting exploration for and development of copper and nickel, as well as factors affecting the PGM industry. The recovery of PGMs from mill tailings since 2004 and the recycling of PGMs from catalytic converters, electrical components, and jewelry has increased since 1995 so that recycled PGMs recovered from these products accounted for about 30 percent of the supply of platinum worldwide and 29 percent of the supply of palladium worldwide in 2010. Economic and geopolitical conditions have influenced PGM supply and demand. The global recession of 2008 and 2009 temporarily decreased demand for PGMs and constrained PGM mine exploration and development, at least through 2010. Legislation regulating the structure of the mining sector has affected mining in Russia, South Africa, and Zimbabwe. Stricter vehicle emissions standards in established markets since the 1980s have led to mandatory use of pollution control devices, such as catalytic converters, that contain PGMs and are required on vehicles in expanding markets, such as China and India. It is expected that South Africa, Russia, Canada, and Zimbabwe will continue to be the principal sources of PGM at least for the next decade. Based on this review of the PGM industry, the world’s platinum capacity, expressed in terms of recoverable platinum metal, increased from 1995 through 2010 by 77,000 kilograms (kg) in South Africa, 9,000 kg in Zimbabwe, 6,000 kg in Russia, 2,000 kg in Botswana, and 2,000 kg in Canada. For the same period, palladium capacity worldwide increased by 44,000 kg in South Africa, 22,000 kg in Russia, 8,000 kg in Canada, 8,000 kg in the United States, 7,000 kg in Zimbabwe, and 3,000 kg in Botswana. Platinum capacity worldwide is expected to further increase by 24,000 kg in South Africa, 9,000 kg in Russia, 3,000 kg in Canada, and 2,000 kg in Zimbabwe from 2011 through 2015. Palladium capacity worldwide is likewise expected to increase an additional 16,000 kg in Russia, 14,000 kg in

  7. Application of liposomal technologies for delivery of platinum analogs in oncology.

    Science.gov (United States)

    Liu, Demin; He, Chunbai; Wang, Andrew Z; Lin, Wenbin

    2013-01-01

    Platinum-based chemotherapy, such as cisplatin, oxaliplatin, and carboplatin, is one of the most widely utilized classes of cancer therapeutics. While highly effective, the clinical applications of platinum-based drugs are limited by their toxicity profiles as well as suboptimal pharmacokinetic properties. Therefore, one of the key research areas in oncology has been to develop novel platinum analog drugs and engineer new platinum drug formulations to improve the therapeutic ratio further. Such efforts have led to the development of platinum analogs including nedaplatin, heptaplatin, and lobaplatin. Moreover, reformulating platinum drugs using liposomes has resulted in the development of L-NDPP (Aroplatin™), SPI-77, Lipoplatin™, Lipoxal™, and LiPlaCis®. Liposomes possess several attractive biological activities, including biocompatibility, high drug loading, and improved pharmacokinetics, that are well suited for platinum drug delivery. In this review, we discuss the various platinum drugs and their delivery using liposome-based drug delivery vehicles. We compare and contrast the different liposome platforms as well as speculate on the future of platinum drug delivery research.

  8. Effect of the Platinum Electroplated Layer Thickness on the Coatings' Microstructure

    Science.gov (United States)

    Zagula-Yavorska, Maryana; Gancarczyk, Kamil; Sieniawski, Jan

    2017-03-01

    CMSX 4 and Inconel 625 superalloys were coated by platinum layers (3 and 7 μm thick) in the electroplating process. The heat treatment of platinum layers (at 1,050 ˚C for 2 h) was performed to increase platinum adherence to the superalloys substrate. The diffusion zone obtained on CMSX 4 superalloy (3 and 7 μm platinum thick before heat treatment) consisted of two phases: γ-Ni(Al, Cr) and (Al0.25Pt0.75)Ni3. The diffusion zone obtained on Inconel 625 superalloy (3 μm platinum thick before heat treatment) consisted of the α-Pt(Ni, Cr, Al) phase. Moreover, γ-Ni(Cr, Al) phase was identified. The X-ray diffraction (XRD) results revealed the presence of platinum in the diffusion zone of the heat-treated coating (7 μm platinum thick) on Inconel 625 superalloy. The surface roughness parameter Ra of heat-treated coatings increased with the increase of platinum layers thickness. This was due to the unequal mass flow of platinum and nickel.

  9. Influence of Surface Structure of Platinum Electrodes on Electrooxidation of CO

    Institute of Scientific and Technical Information of China (English)

    XIA Xing-hua; ZHANG Dai; SONG Yan-yan

    2003-01-01

    The oxidation of CO on platinum electrodes in an acid solution was studied with the conventional electrochemical methods and the on-line electrochemical mass spectroscopy. It was found that this reaction is strongly determined by the surface morphology of platinum. The pretreatment of platinum electrodes can change the surface properties dramatically, in consequence it can improve the electrocatalytic activity towards the electrooxidation of CO. The existence of surface active sites on the roughened platinum electrodes can be used to explain its high electrocatalysis towards the oxidation of CO.

  10. Dialkyl bisphosphonate platinum(II) complex as a potential drug for metastatic bone tumor.

    Science.gov (United States)

    Nakatake, Hidetoshi; Ekimoto, Hisao; Aso, Mariko; Ogawa, Atsushi; Yamaguchi, Asami; Suemune, Hiroshi

    2011-01-01

    Bisphosphonates have high affinity for hydroxyapatite (HA), which is abundantly present in bone. Also, platinum complexes are known that have a wide spectrum of antitumor activities. The conjugate of bisphosphonate and a platinum complex might have HA affinity and antitumor activity, and become a drug for metastatic bone tumor. In this study, the authors synthesized platinum complexes that had dialkyl bisphosphonic acid as a ligand, and evaluated the possibility of the synthesized complexes as a drug for metastatic bone tumor. The synthesized dialkyl bisphosphonate platinum(II) complex was characterized, and its stability in an aqueous solution was also confirmed. The synthesized platinum complex showed higher HA affinity than other platinum complexes such as cisplatin and carboplatin in an experiment of adsorption to HA. In vitro, the platinum complex showed tumor growth inhibitory effect stronger than or equal to cisplatin, which is the most commonly used antitumor agent. Moreover, the platinum complex showed a bone absorption inhibitory effect on the osteoclast. These results suggest potential of dialkyl bisphosphonate platinum(II) complexes as a drug for metastatic bone tumor.

  11. Application of liposomal technologies for delivery of platinum analogs in oncology

    Science.gov (United States)

    Liu, Demin; He, Chunbai; Wang, Andrew Z; Lin, Wenbin

    2013-01-01

    Platinum-based chemotherapy, such as cisplatin, oxaliplatin, and carboplatin, is one of the most widely utilized classes of cancer therapeutics. While highly effective, the clinical applications of platinum-based drugs are limited by their toxicity profiles as well as suboptimal pharmacokinetic properties. Therefore, one of the key research areas in oncology has been to develop novel platinum analog drugs and engineer new platinum drug formulations to improve the therapeutic ratio further. Such efforts have led to the development of platinum analogs including nedaplatin, heptaplatin, and lobaplatin. Moreover, reformulating platinum drugs using liposomes has resulted in the development of L-NDPP (Aroplatin™), SPI-77, Lipoplatin™, Lipoxal™, and LiPlaCis®. Liposomes possess several attractive biological activities, including biocompatibility, high drug loading, and improved pharmacokinetics, that are well suited for platinum drug delivery. In this review, we discuss the various platinum drugs and their delivery using liposome-based drug delivery vehicles. We compare and contrast the different liposome platforms as well as speculate on the future of platinum drug delivery research. PMID:24023517

  12. Smart windows for building integration: a new architecture for photovoltachromic devices.

    Science.gov (United States)

    Malara, Francesco; Cannavale, Alessandro; Carallo, Sonia; Gigli, Giuseppe

    2014-06-25

    A new architecture for multifunctional photoelectrochemical devices, namely photovoltachromic devices, is disclosed here, capable of producing electric energy by solar conversion also modulating the devices' optical transmittance in a smart and aesthetically sounding fashion. These devices generally consist of a titanium dioxide photoelectrode and of a bifunctional patterned counter electrode made of platinum and amorphous tungsten oxide. The innovative configuration described hereafter proposes to split the single patterned counter electrode into two distinct electrodes, physically overlapped: the central one is suitably drilled in order to allow the electrolyte to fill both communicating chambers. These three electrode devices allow three independent operating modes: photovoltaic, photoelectrochromic, and photovoltachromic. In this paper, we report the optical, electrical, and electrochemical characterization of this innovative device, varying both available catalytic surface area and the type of sensitizing dye. We eventually obtained the following conversion efficiencies, 2.75%, 2.35%, and 1.91%, in samples having different catalytic areas (397, 360, and 320 mm(2), respectively). We inferred that the higher the platinum area on the interposed platinum-poly(ethylene naphthalate)-indium tin oxide counter electrode, the higher the photovoltaic conversion efficiency. On the other hand, a decrease of the intercommunication openings generates a slowdown of bleaching processes.

  13. Fabrication of platinum coated nanoporous gold film electrode: A nanostructured ultra low-platinum loading electrocatalyst for hydrogen evolution reaction

    Energy Technology Data Exchange (ETDEWEB)

    Kiani, Abolfazl; Hatami, Somayeh [Department of Chemistry, Faculty of Science, University of Isfahan, Isfahan (Iran)

    2010-06-15

    The electrolytic hydrogen evolution reaction (HER) on platinum coated nanoporous gold film (PtNPGF) electrode is demonstrated. The deposition of platinum occurred as a spontaneous redox process in which a copper layer, obtained by underpotential deposition, was oxidized by platinum ions, which were reduced and simultaneously deposited. The present method could provide a very low Pt-loading electrode and the results demonstrated that ultra thin Pt coating effected efficiently and behaved as the nanostructured Pt for electrocatalytic hydrogen evolution reaction. The loading of Pt was calculated as 4.2 x 10{sup -3} {mu}g cm{sup -2} for PtNPGF electrode. The current density at -0.4 V and -0.8 V vs. Ag/AgCl was as high as 0.66 A {mu}g{sup -1} Pt and 3 A {mu}g{sup -1} Pt, respectively and the j{sub 0} was evaluated as 0.03 mA cm{sup -2} or 8 mA {mu}g{sup -1} Pt. The results indicated that increasing electrode area had no catalytic effect, but the nanostructure nature of as-fabricated electrode and submonolayer deposition of copper resulted in electrocatalytic activity for PtNPGF electrode. (author)

  14. Antitumor effects of nano-bubble hydrogen-dissolved water are enhanced by coexistent platinum colloid and the combined hyperthermia with apoptosis-like cell death.

    Science.gov (United States)

    Asada, Ryoko; Kageyama, Katsuhiro; Tanaka, Hiroshi; Matsui, Hisakazu; Kimura, Masatsugu; Saitoh, Yasukazu; Miwa, Nobuhiko

    2010-12-01

    In order to erase reactive oxygen species (ROS) related with the proliferation of tumor cells by reducing activity of hydrogen, we developed functional water containing nano-bubbles (diameters: hydrogen of 1.1-1.5 ppm (the theoretical maximum: 1.6 ppm) with a reducing ability (an oxidation-reduction potential -650 mV, normal water: +100-200 mV) using a microporous-filter hydrogen-jetting device. We showed that hydrogen water erased ROS indispensable for tumor cell growth by ESR/spin trap, the redox indicator CDCFH-DA assay, and was cytotoxic to Ehrlich ascites tumor cells as assessed by WST-8 assay, crystal violet dye stain and scanning electron microscopy, after 24-h or 48-h incubation sequent to warming at 37°C or 42°C. Hydrogen water supplemented with platinum colloid (0.3 ppm Pt in 4% polyvinylpyrrolidone) had more antitumor activity than hydrogen water alone, mineral water alone (15.6%), hydrogen water plus mineral water, or platinum colloid alone as observed by decreased cell numbers, cell shrinkage and pycnosis (nuclear condensation)/karyorrhexis (nuclear fragmentation) indicative of apoptosis, together with cell deformation and disappearance of microvilli on the membrane surface. These antitumor effects were promoted by combination with hyperthermia at 42°C. Thus, the nano-bubble hydrogen water with platinum colloid is potent as an anti-tumor agent.

  15. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  16. Elution of platinum from carboplatin-impregnated calcium sulfate hemihydrate beads in vitro.

    Science.gov (United States)

    Tulipan, Rachel J; Phillips, Heidi; Garrett, Laura D; Dirikolu, Levent; Mitchell, Mark A

    2016-11-01

    OBJECTIVE To characterize the elution of platinum from carboplatin-impregnated calcium sulfate hemihydrate (CSH) beads in vitro. SAMPLE 60 carboplatin-impregnated CSH beads and 9 CSH beads without added carboplatin (controls). PROCEDURES Carboplatin-impregnated CSH beads (each containing 4.6 mg of carboplatin [2.4 mg of platinum]) were placed into separate 10-mL plastic tubes containing 5 mL of PBSS in groups of 1, 3, 6, or 10; 3 control beads were placed into a single tube of PBSS at the same volume. Experiments were conducted in triplicate at 37°C and a pH of 7.4 with constant agitation. Eluent samples were collected at 1, 2, 3, 6, 12, 24, and 72 hours. Samples were analyzed for platinum content by inductively coupled plasma-mass spectrometry. RESULTS The mean concentration of platinum released per carboplatin-impregnated bead over 72 hours was 445.3 mg/L. Cumulative concentrations of platinum eluted increased as the number of beads per tube increased. There was a significant difference in platinum concentrations over time, with values increasing over the first 12 hours and then declining for all tubes. There was also a significant difference in percentage of total incorporated platinum released into tubes with different numbers of beads: the percentage of eluted platinum was higher in tubes containing 1 or 3 beads than in those containing 6 or 10 beads. CONCLUSIONS AND CLINICAL RELEVANCE Carboplatin-impregnated CSH beads eluted platinum over 72 hours. Further studies are needed to determine whether implantation of carboplatin-impregnated CSH beads results in detectable levels of platinum systemically and whether the platinum concentrations eluted locally are toxic to tumor cells.

  17. Determinants of ototoxicity in 451 platinum-treated Dutch survivors of childhood cancer : A DCOG late-effects study

    NARCIS (Netherlands)

    Clemens, Eva; de Vries, Andrica C.; Pluijm, Saskia F.; Zehnhoff-Dinnesen, Antoinette Am; Tissing, Wim J.; Loonen, Jacqueline J.; van Dulmen-den Broeder, Eline; Bresters, Dorine; Versluys, Birgitta; Kremer, Leontien C.; van der Pal, Heleen J.; van Grotel, Martine; van den Heuvel-Eibrink, Marry M.

    2016-01-01

    Platinum-containing chemotherapeutics are efficacious for a variety of pediatric malignancies, nevertheless these drugs can induce ototoxicity. However, ototoxicity data on large cohorts of childhood cancer survivors (CCSs) who received platinum agents, but not cranial irradiation are scarce.

  18. Structure and reactivity of a unique Y-shaped tricoordinate bis(silyl)platinum(II)-NHC complex

    NARCIS (Netherlands)

    Berthon-Gelloz, G.; de Bruin, B.; Tinant, B.; Markó, I.E.

    2009-01-01

    A unique, three-coordinate Y-shaped bis(silyl)platinum(II) complex was isolated and characterized. DFT studies on a model system shed light on the nature of this unusual coordination mode for platinum(II).

  19. Distribution of platinum in patients treated with cisplatin determined by radiochemical neutron activation analysis

    DEFF Research Database (Denmark)

    Heydorn, K.; Rietz, B.; Krarup-Hansen, A.

    1998-01-01

    tissue from 2 male and 2 female patients, treated with different doses of cisplatin. Platinum and gold was determined in all samples. Results for platinum were found to depend not only on the total amount of cisplatin ingested, but also on the time between the last dose and death. Highest concentrations...

  20. Metal Oxide-Supported Platinum Overlayers as Proton-Exchange Membrane Fuel Cell Cathodes

    DEFF Research Database (Denmark)

    Tripkovic, Vladimir; Abild-Pedersen, Frank; Studt, Felix

    2012-01-01

    We investigated the activity and stability of n=(1, 2, 3) platinum layers supported on a number of rutile metal oxides (MO2; M=Ti, Sn, Ta, Nb, Hf and Zr). A suitable oxide support can alleviate the problem of carbon corrosion and platinum dissolution in Pt/C catalysts. Moreover, it can increase t...

  1. A Tin(IV) Porphyrin with Two Axial Organometallic NCN-Pincer Platinum Units

    NARCIS (Netherlands)

    Suijkerbuijk, B.M.J.M.; Tooke, D.M.; Spek, A.L.; van Koten, G.; Klein Gebbink, R.J.M.

    2007-01-01

    A tin(IV) porphyrin was combined with two axial NCN-pincer platinum(II) fragments by utilizing the oxophilicity of the apical positions on the tin atom and the acidic nature of the NCN-pincer platinum derived benzoic acid. The solid-state structure determined by X-ray crystallography revealed some

  2. Recent Approaches to Platinum(IV) Prodrugs: A Variety of Strategies for Enhanced Delivery and Efficacy.

    Science.gov (United States)

    Najjar, Anas; Rajabi, Naeema; Karaman, Rafik

    2017-01-01

    Intensive efforts have been implemented to improve the efficacy of platinum complexes especially with emerging cisplatin resistance and elevated cancer deaths. Platinum(IV) agents show better pharmacokinetics and decreased side effects compared to Platinum(II) agents. This review aims to summarize and categorize the strategies being employed to improve the efficacy of Platinum-based anticancer agents in recent years. Nanoparticles and nanoplatforms offer a vast variety of strategies in targeting specific tumor types and delivering one or two lethal drugs simultaneously. Theranostic agents are being developed to achieve enhanced imaging and provide further insight into the activity of platinum containing chemotherapy. Moreover, photoactivation of Pt(IV) prodrugs specifically at the tumor site is gaining attention due to a controlled activity. A platinum agent formulated as large multi-activity complex is the most common strategy being employed. Platinum(IV) agents offer great potential in targeting, increasing efficacy, and decreasing toxicity of Platinum-based anticancer agents. The strategies being employed are aiming to increase specificity and targeting as well as provide more potent agents. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  3. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, HVLP COATING EQUIPMENT, SHARPE MANUFACTURING COMPANY PLATINUM 2012 HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the Sharpe Platinum 2013 high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the Sharpe Platinum, which is designed for use in automotive refinishing. The test coating chosen by Sharpe Manufacturi...

  4. The determination of platinum in tissue of different human organs by means of neutron activation analysis

    DEFF Research Database (Denmark)

    Rietz, Bernd; Heydorn, Kaj; Krarup-Hansen, Anders

    2002-01-01

    . It was demonstrated that radiochemical neutron activation analysis can be used for these studies because of its sensitivity and precision and a low detection limit for platinum (similar to1 ng). Tissues of the following organs were analyzed for platinum: liver, kidney, testis, lung, pancreas and muscle. This study...

  5. SEROTONIN METABOLISM FOLLOWING PLATINUM-BASED CHEMOTHERAPY COMBINED WITH THE SEROTONIN TYPE-3 ANTAGONIST TROPISETRON

    NARCIS (Netherlands)

    SCHRODER, CP; VANDERGRAAF, WTA; KEMA, IP; GROENEWEGEN, A; SLEIJFER, DT; DEVRIES, EGE

    1995-01-01

    The administration of platinum-based chemotherapy induces serotonin release from the enterochromaffin cells, causing nausea and vomiting. This study was conducted to evaluate parameters of serotonin metabolism following platinum-based chemotherapy given in combination with the serotonin type-3 antag

  6. Lack of nephrotoxicity of new oral platinum drug JM216 in lung cancer patients

    NARCIS (Netherlands)

    Fokkema, E; de Vries, EGE; Meijer, S; Groen, HJM

    Purpose: The purpose of this study was to assess renal function in patients treated with the oral platinum drug JM216 [bisacetato-ammine-dichloro-cyclohexylamine-platinum (IV)I, since the effects of JM216 on renal function have only partly been investigated using serum parameters or Cr-51-EDTA

  7. Enzymatic recovery of platinum (IV) from industrial wastewater using a biosulphidogenic hydrogenase

    CSIR Research Space (South Africa)

    Rashamuse, KJ

    2008-04-01

    Full Text Available this treatment process suggesting that platinum sulphide was not formed and supporting the argument that the increased amount (78%) of platinum removal from the industrial wastewater by the growing SRB cells was due to more hydrogenase/cytochrome c3 enzyme...

  8. 78 FR 11954 - Revised Pricing Grid for Gold and Platinum Products

    Science.gov (United States)

    2013-02-20

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF THE TREASURY United States Mint Revised Pricing Grid for Gold and Platinum Products AGENCY: United States Mint... grid for 2013 gold and platinum products. Please see the grid following signature. DATES: This...

  9. Electron-beam-induced deposition of platinum at low landing energies

    NARCIS (Netherlands)

    Botman, A.; De Winter, D.A.M.; Mulders, J.J.L.

    2008-01-01

    Electron-beam-induced deposition of platinum from methylcyclopentadienyl-platinum-trimethyl was performed with a focused electron beam at low landing energies, down to 10 eV. The deposition growth rate is maximal at 140 eV, with the process being over ten times more efficient than at 20 kV. No signi

  10. Electrocatalytic Activity of Platinum Particles Electrodeposited onto Poly(vinylpyridine) Films

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The electrocatalytic properties of platinum microparticles incorporated into poly- (vinylpyridine) (PVP) films, a conducting polymer with good conductivity and stability, were investigated for hydrogen evolution and formic acid electrooxidation in acidic media. It was found that the catalytic effects depend mainly on the size and amounts of the platinum microparticles dispersed in the polymer layer.

  11. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT, HVLP COATING EQUIPMENT, SHARPE MANUFACTURING COMPANY PLATINUM 2012 HVLP SPRAY GUN

    Science.gov (United States)

    This report presents the results of the verification test of the Sharpe Platinum 2013 high-volume, low-pressure gravity-feed spray gun, hereafter referred to as the Sharpe Platinum, which is designed for use in automotive refinishing. The test coating chosen by Sharpe Manufacturi...

  12. Structure of matrix metalloproteinase-3 with a platinum-based inhibitor.

    Science.gov (United States)

    Belviso, Benny Danilo; Caliandro, Rocco; Siliqi, Dritan; Calderone, Vito; Arnesano, Fabio; Natile, Giovanni

    2013-06-18

    An X-ray investigation has been performed with the aim of characterizing the binding sites of a platinum-based inhibitor (K[PtCl3(DMSO)]) of matrix metalloproteinase-3 (stromelysin-1). The platinum complex targets His224 in the S1' specificity loop, representing the first step in the selective inhibition process (PDB ID code 4JA1).

  13. Advances in the synthesis mulitmetallic systems: hydroxyl group protection in aryldiamine platinum species

    NARCIS (Netherlands)

    Koten, G. van; Davies, P.J.; Grove, D.M.

    1997-01-01

    A multimetallic system containing three platinum atoms has been synthesized through use of an (aryldiamine)platinum complex with a protected hydroxyl group which, after deprotection, is coupled with the trisubstituted aryl molecule 1,3,5-tris(chlorocarbonyl)benzene that provides the core moiety. The

  14. The interaction of platinum-based drugs with native biologically relevant proteins

    NARCIS (Netherlands)

    Brauckmann, Christine; Wehe, Christoph A.; Kieshauer, Michael; Lanvers-Kaminsky, Claudia; Sperling, Michael; Karst, Uwe

    2013-01-01

    This study focuses on the identification of the products that are formed upon binding of therapeutically relevant platinum complexes to proteins like beta-lactoglobulin A (LGA), human serum albumin (HSA), or human hemoglobin (HB). The respective proteins were incubated with the platinum-based antica

  15. Design and development of polynuclear ruthenium and platinum polypyridyl complexes in search of new anticancer agents

    NARCIS (Netherlands)

    Schilden, Karlijn van der

    2006-01-01

    The research described in this Ph.D. Thesis has been devoted to the design and development of polynuclear polypyridyl ruthenium and ruthenium-platinum complexes in search of new anticancer agents. A variety of polynuclear ruthenium and ruthenium-platinum complexes has been synthesized with a long an

  16. Determination of platinum in waste platinum-loaded carbon catalyst samples using microwave-assisted sample digestion and ICP-OES

    Science.gov (United States)

    Ma, Yinbiao; Wei, Xiaojuan

    2017-04-01

    A novel method for the determination of platinum in waste platinum-loaded carbon catalyst samples was established by inductively coupled plasma optical emission spectrometry after samples digested by microwave oven with aqua regia. Such experiment conditions were investigated as the influence of sample digestion methods, digestion time, digestion temperature and interfering ions on the determination. Under the optimized conditions, the linear range of calibration graph for Pt was 0 ˜ 200.00 mg L-1, and the recovery was 95.67% ˜ 104.29%. The relative standard deviation (RSDs) for Pt was 1.78 %. The proposed method was applied to determine the same samples with atomic absorption spectrometry with the results consistently, which is suitable for the determination of platinum in waste platinum-loaded carbon catalyst samples.

  17. Textured strontium titanate layers on platinum by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Blomberg, T., E-mail: tom.blomberg@asm.com [ASM Microchemistry Ltd., Vaeinoe Auerin katu 12 A, 00560 Helsinki (Finland); Anttila, J.; Haukka, S.; Tuominen, M. [ASM Microchemistry Ltd., Vaeinoe Auerin katu 12 A, 00560 Helsinki (Finland); Lukosius, M.; Wenger, Ch. [IHP, Im Technologiepark 25, 15236 Frankfurt (Oder) (Germany); Saukkonen, T. [Aalto University, Puumiehenkuja 3, 02150 Espoo (Finland)

    2012-08-31

    Formation of textured strontium titanate (STO) layers with large lateral grain size (0.2-1 {mu}m) and low X-ray reflectivity roughness ({approx} 1.36 nm) on Pt electrodes by industry proven atomic layer deposition (ALD) method is demonstrated. Sr(t-Bu{sub 3}Cp){sub 2}, Ti(OMe){sub 4} and O{sub 3} precursors at 250 Degree-Sign C were used to deposit Sr rich STO on Pt/Ti/SiO{sub 2}/Si Empty-Set 200 mm substrates. After crystallization post deposition annealing at 600 Degree-Sign C in air, most of the STO grains showed a preferential orientation of the {l_brace}001{r_brace} plane parallel to the substrate surface, although other orientations were also present. Cross sectional and plan view transmission electron microscopy and electron diffraction analysis revealed more than an order of magnitude larger lateral grain sizes for the STO compared to the underlying multicrystalline {l_brace}111{r_brace} oriented platinum electrode. The combination of platinum bottom electrodes with ALD STO(O{sub 3}) shows a promising path towards the formation of single oriented STO film. - Highlights: Black-Right-Pointing-Pointer Amorphous strontium titanate (STO) on platinum formed a textured film after annealing. Black-Right-Pointing-Pointer Single crystal domains in 60 nm STO film were 0.2-1 {mu}m wide. Black-Right-Pointing-Pointer Most STO grains were {l_brace}001{r_brace} oriented.

  18. Rumpling phenomenon in platinum modified Ni-Al alloys

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, Benjamin Joseph [Iowa State Univ., Ames, IA (United States)

    2005-05-01

    Surface undulations known as rumpling have been shown to develop at the surface of bond coats used in advanced thermal barrier coating systems. Rumpling can result in cracking and eventual spallation of the top coat. Many mechanisms to explain rumpling have been proposed, and among them is a martensitic transformation. High-temperature x-ray diffraction, differential scanning calorimetry and potentiometry were used to investigate the nature of the martensitic transformation in bulk platinum-modified nickel aluminides. It was found that the martensitic transformation has strong time dependence and can form over a range of temperatures. Cyclic oxidation experiments were performed on the bulk alloys to investigate the effect of the martensitic transformation on surface rumpling. It was found that the occurrence of rumpling was associated with the martensitic transformation. The degree of rumpling was found to increase with an increasing number of cycles and was independent of the heating and cooling rates used. The thickness of the oxide layer at the surface of the samples had a significant impact on the amplitude of the resulting undulations, with amplitude increasing with increasing oxide-layer thickness. Rumpling was also observed in an alloy based on the γ-γ' region of the nickel-aluminum-platinum phase diagram. Rumpling in this alloy was found to occur during isothermal oxidation and is associated with a subsurface layer containing a platinum-rich phase known as a. Rumpling in both alloy systems may be explained by creep deformation of a weakened subsurface layer in response to the compressive stresses in the thermally grown oxide layer.

  19. Extraction of gold, palladium, and platinum from acidic media with cyclic sulfoxide derivative

    Institute of Scientific and Technical Information of China (English)

    Songping Wu; Guobang Gu

    2007-01-01

    The extraction of gold (Ⅲ), palladium (Ⅱ), and platinum (Ⅳ) from the acidic media with the cyclic sulfoxide derivative of a-dodecyl-tetrahydrothiophene 1-oxide (dtmso) was investigated. Gold (Ⅲ), palladium (Ⅱ), and platinum (Ⅳ) could be separated from the acidic media with suitable sulfoxide concentration and acidity. The extraction reaction of gold (Ⅲ), palladium (Ⅱ) or platinum (Ⅳ) is exothermic when dtmso is used as an extracting reagent. The coordination number was studied by the slope method. The results indicate that, in high acidity, the dtmso coordination number for extracting gold (Ⅲ) or palladium (Ⅱ) is 3, and that for platinum (Ⅳ) is 2. UV and FT-IR spectra were used to analyze the structure of the complex. Gold (Ⅲ) is coordinated with the oxygen atom in S=O group in dtmso, and palladium (Ⅱ) or platinum (Ⅳ) is coordinated with the sulfur atom in S=O group in dtmso.

  20. Development of Platinum(iv) Complexes as Anticancer Prodrugs: the Story so Far

    Science.gov (United States)

    Wong, Daniel Yuan Qiang; Ang, Wee Han

    2012-06-01

    The serendipitous discovery of the antitumor properties of cisplatin by Barnett Rosenberg some forty years ago brought about a paradigm shift in the field of medicinal chemistry and challenged conventional thinking regarding the role of potentially toxic heavy metals in drugs. Platinum(II)-based anticancer drugs have since become some of the most effective and widely-used drugs in a clinician's arsenal and have saved countless lives. However, they are limited by high toxicity, severe side-effects and the incidence of drug resistance. In recent years, attention has shifted to stable platinum(IV) complexes as anticancer prodrugs. By exploiting the unique chemical and structural attributes of their scaffolds, these platinum(IV) prodrugs offer new strategies of targeting and killing cancer cells. This review summarizes the development of anticancer platinum(IV) prodrugs to date and some of the exciting strategies that utilise the platinum(IV) construct as targeted chemotherapeutic agents against cancer.

  1. On the mobility of carbon-supported platinum nanoparticles towards unveiling cathode degradation in water electrolysis

    Science.gov (United States)

    Paciok, Paul; Schalenbach, Maximilian; Carmo, Marcelo; Stolten, Detlef

    2017-10-01

    This study investigates the influence of the hydrogen evolution reaction (HER) overpotential on the mobility of carbon-supported platinum particles. The migration of the platinum over the carbon support was analyzed by means of identical location transmission electron microscopy (IL-TEM). While at potentials of 0.1 and 0 V vs. reversible hydrogen electrode (RHE), no changes to the Pt/C material were observed. With a decrease of the overpotential to -0.1 V vs. RHE, an increase in the quantity of migrating platinum particles took place. At -0.2 V vs. RHE, a further rise in the particle migration was observed. The effect of the overpotential on the migration was explained by a higher hydrogen generation rate, the formation of a hydrogen monolayer on the platinum and the resulting changes of the platinum support distance. The mechanisms revealed in this study could describe a relevant source of degradation of PEM water electrolyzers.

  2. PLATINUM: a web tool for analysis of hydrophobic/hydrophilic organization of biomolecular complexes.

    Science.gov (United States)

    Pyrkov, Timothy V; Chugunov, Anton O; Krylov, Nikolay A; Nolde, Dmitry E; Efremov, Roman G

    2009-05-01

    The PLATINUM (Protein-Ligand ATtractions Investigation NUMerically) web service is designed for analysis and visualization of hydrophobic/hydrophilic properties of biomolecules supplied as 3D-structures. Furthermore, PLATINUM provides a number of tools for quantitative characterization of the hydrophobic/hydrophilic match in biomolecular complexes e.g. in docking poses. These complement standard scoring functions. The calculations are based on the concept of empirical Molecular Hydrophobicity Potential (MHP). The PLATINUM web tool as well as detailed documentation and tutorial are available free of charge for academic users at http://model.nmr.ru/platinum/. PLATINUM requires Java 5 or higher and Adobe Flash Player 9. Supplementary data are available at Bioinformatics online.

  3. Platinum-polyaniline-modified carbon fiber electrode for the electrooxidation of methanol

    Institute of Scientific and Technical Information of China (English)

    WU Kezhong; MENG Xu; WANG Xindong; LI Jingling

    2005-01-01

    Platinum was electrodeposited onto a polyaniline-modified carbon fiber electrode by the cyclic voltammetric method in sulfuric acid, which may enable an increase in the level of platinum u tilization currently achieved in electrocatalyric systems. This electrode preparation consists of a two-step procedure: first electropolymerization of aniline onto carbon fiber and then electrodeposition of platinum. The catalytic activity of the platinum-polyaniline-modified carbon fiber electrode (Pt/PAni/C) was compared with that of a bare carbon fiber electrode (Pt/C) by the oxidation of methanol. The maximum oxidation current of methanol on Pt/PAni/C is 50.7 mA.cm-2, which is 6.7 times higher than 7.6 mA.cm-2 on the Pt/C.Scanning electron microscopy was used to investigate the dispersion of the platinum particles of about 0.4 μm.

  4. Bulk synthesis of nanoporous palladium and platinum powders

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, David B; Fares, Stephen J; Tran, Kim L; Langham, Mary E

    2014-04-15

    Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

  5. Effect of Platinum Group Metal Doping in Magnesium Diboride Wires

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Alexiou, Aikaterini; Namazkar, Shahla

    2016-01-01

    The effect of some platinum group metals(PGM = Rh, Pd, and Pt) on the microstructure and critical current density of Cu/Nb-sheathed MgB2 wires has been studied using Mg1-x PGMxB2 powders with low doping levels. It was found that Pt and Pd do not enter the MgB2 lattice and have only limited....... The results are discussed in comparison with previous investigations using other transition metals for doping on the Mg site....

  6. Pulse Voltammetry in Single Cells Using Platinum Microelectrodes

    Science.gov (United States)

    1991-11-22

    ring electrodes [18) in a solution of 1.OxlO’ M H2PtCl6 and 0.5 M H2SO4 and reducing platinum at 0.0 V vs SSCE for a desired deposition time. Cyclic ...E. and the range for Ed in multiple pulse voltammetry can be chosen from examination of voltammograms obtained by cyclic voltammetry or lin-ir sweep... voltametry [3,13]. As pointed out by Sinru et al. [14) the potential and time of each pulse has a direct effect on the nature of the voltammetry

  7. Stability and phase transfer of catalytically active platinum nanoparticle suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Sriram, Indira; Curtin, Alexandra E.; Chiaramonti, Ann N.; Cuchiaro, J. Hunter; Weidner, Andrew R.; Tingley, Tegan M.; Greenlee, Lauren F.; Jeerage, Kavita M., E-mail: jeerage@boulder.nist.gov [National Instrument of Standards and Technology, Applied Chemicals and Materials Division (United States)

    2015-05-15

    In this work, we present a robust synthesis protocol for platinum nanoparticles that yields a monomodal dispersion of particles that are approximately 100 nm in diameter. We determine that these particles are actually agglomerates of much smaller particles, creating a “raspberry” morphology. We demonstrate that these agglomerates are stable at room temperature for at least 8 weeks by dynamic light scattering. Furthermore, we demonstrate consistent electrocatalytic activity for methanol oxidation. Finally, we quantitatively explore the relationship between dispersion solvent and particle agglomeration; specifically, particles are found to agglomerate abruptly as solvent polarity decreases.

  8. Synthesis and polarized photoluminescence of novel phosphorescent cyclometalated platinum dimer

    Institute of Scientific and Technical Information of China (English)

    Shi Ping Jiang; Kai Jun Luo; Ying Han Wang; Xin Wang; Ying Jiang; Yan Yan Wei

    2011-01-01

    A novel phosphorescent cyclometalated platinum dimer with bis-[2-(p-dodecyloxyphenyl) pyridyl]-hexane-l,6-diol as ligand and 1,3-( 1-n-hexyl,3-n-heptadecyl) diketone as ancillary ligand was synthesized. The chemical structure and liquid crystal property of the dimer were characterized by 1H NMR, ESI-MS, polarizing optical microscopy (POM) and differential scanning calorimetry (DSC). The aligned film of title compound on the rubbed polyimide film is intensely emissive at room temperature with emission maximum at 516 nm. The luminescence dichroic ratio (I∥/ IL) at 516 nm is 3.1.

  9. Bulk synthesis of nanoporous palladium and platinum powders

    Science.gov (United States)

    Robinson, David B [Fremont, CA; Fares, Stephen J [Pleasanton, CA; Tran, Kim L [Livermore, CA; Langham, Mary E [Pleasanton, CA

    2012-04-17

    Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

  10. A pulsed mode electrolytic drug delivery device

    KAUST Repository

    Yi, Ying

    2015-09-14

    This paper reports the design of a proof-of-concept drug delivery device that is actuated using the bubbles formed during electrolysis. The device uses a platinum (Pt) coated nickel (Ni) metal foam and a solid drug in reservoir (SDR) approach to improve the device\\'s performance. This electrochemically-driven pump has many features that are unlike conventional drug delivery devices: it is capable of pumping periodically and being refilled automatically; it features drug release control; and it enables targeted delivery. Pt-coated metal foam is used as a catalytic reforming element, which reduces the period of each delivery cycle. Two methods were used for fabricating the Pt-coated metal: sputtering and electroplating. Of these two methods, the sputtered Pt-coated metal foam has a higher pumping rate; it also has a comparable recombination rate when compared to the electroplated Pt-coated metal foam. The only drawback of this catalytic reformer is that it consumes nickel scaffold. Considering long-term applications, the electroplated Pt metal foam was selected for drug delivery, where a controlled drug release rate of 2.2 μg ± 0.3 μg per actuation pulse was achieved using 4 mW of power.

  11. Ventricular assist device

    Science.gov (United States)

    VAD; RVAD; LVAD; BVAD; Right ventricular assist device; Left ventricular assist device; Biventricular assist device; Heart pump; Left ventricular assist system; LVAS; Implantable ventricular assist device

  12. Spin transport in as-grown and annealed thulium iron garnet/platinum bilayers with perpendicular magnetic anisotropy

    Science.gov (United States)

    Avci, Can Onur; Quindeau, Andy; Mann, Maxwell; Pai, Chi-Feng; Ross, Caroline A.; Beach, Geoffrey S. D.

    2017-03-01

    We characterize the spin Hall magnetoresistance (SMR), spin Seebeck effect (SSE), and dampinglike spin-orbit torque (SOT) in thulium iron garnet/platinum bilayers with perpendicular magnetic anisotropy by using harmonic Hall effect measurements. By consecutive annealing steps followed by measurements on a single device, we reveal that the spin-dependent effects gradually decrease in amplitude as the annealing temperature increases. We attribute this behavior primarily to the changes in the spin-mixing conductance, which sensitively depends on the interface quality. However, further analysis demonstrates that although the SSE scales closely with the SMR, the dampinglike SOT shows a significantly different trend upon annealing, contrary to theoretical expectations. By comparing the dampinglike SOT with the field-induced Hall effect, we found evidence that scattering from Fe impurities in the Pt at the interface might be responsible for the distinct annealing temperature dependence of the dampinglike SOT.

  13. Targeting Notch, a key pathway for ovarian cancer stem cells, sensitizes tumors to platinum therapy.

    Science.gov (United States)

    McAuliffe, Shannon M; Morgan, Stefanie L; Wyant, Gregory A; Tran, Lieu T; Muto, Katherine W; Chen, Yu Sarah; Chin, Kenneth T; Partridge, Justin C; Poole, Barish B; Cheng, Kuang-Hung; Daggett, John; Cullen, Kristen; Kantoff, Emily; Hasselbatt, Kathleen; Berkowitz, Julia; Muto, Michael G; Berkowitz, Ross S; Aster, Jon C; Matulonis, Ursula A; Dinulescu, Daniela M

    2012-10-23

    Chemoresistance to platinum therapy is a major obstacle that needs to be overcome in the treatment of ovarian cancer patients. The high rates and patterns of therapeutic failure seen in patients are consistent with a steady accumulation of drug-resistant cancer stem cells (CSCs). This study demonstrates that the Notch signaling pathway and Notch3 in particular are critical for the regulation of CSCs and tumor resistance to platinum. We show that Notch3 overexpression in tumor cells results in expansion of CSCs and increased platinum chemoresistance. In contrast, γ-secretase inhibitor (GSI), a Notch pathway inhibitor, depletes CSCs and increases tumor sensitivity to platinum. Similarly, a Notch3 siRNA knockdown increases the response to platinum therapy, further demonstrating that modulation of tumor chemosensitivity by GSI is Notch specific. Most importantly, the cisplatin/GSI combination is the only treatment that effectively eliminates both CSCs and the bulk of tumor cells, indicating that a dual combination targeting both populations is needed for tumor eradication. In addition, we found that the cisplatin/GSI combination therapy has a synergistic cytotoxic effect in Notch-dependent tumor cells by enhancing the DNA-damage response, G(2)/M cell-cycle arrest, and apoptosis. Based on these results, we conclude that targeting the Notch pathway could significantly increase tumor sensitivity to platinum therapy. Our study suggests important clinical applications for targeting Notch as part of novel treatment strategies upon diagnosis of ovarian cancer and at recurrence. Both platinum-resistant and platinum-sensitive relapses may benefit from such an approach as clinical data suggest that all relapses after platinum therapy are increasingly platinum resistant.

  14. Separating device

    NARCIS (Netherlands)

    De Jong, T.P.R.

    2001-01-01

    A sorting device (1) suitable for sorting wire from a waste stream, comprising a body (2) that moves when in use, and provided with spikes or similar projections. The body is embodied as a rotatable roll (2), which oscillates axially during its rotation. The roll is coupled to an oscillation engine

  15. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  16. Assistive Devices

    Science.gov (United States)

    ... a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get dressed. Some are high-tech tools, such as computers. Others are much simpler, ...

  17. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure

  18. Electrochemical device

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry; Bellows, Richard J.

    1988-01-12

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  19. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure cha

  20. Balancing device

    NARCIS (Netherlands)

    Van Dorsser, W.D.; Herder, J.L.; Wisse B.M.; Barents, R.

    2007-01-01

    The invention relates to a balancing device for a mass, comprising an arm that is adjustable about a pivoting point and with which the mass is coupled, and an adjustable spring system that is coupled with the arm, which spring system comprises at least one spring, wherein the spring system comprises

  1. Fabrication of graphene-platinum nanocomposite for the direct electrochemistry and electrocatalysis of myoglobin.

    Science.gov (United States)

    Sun, Wei; Li, Linfang; Lei, Bingxin; Li, Tongtong; Ju, Xiaomei; Wang, Xiuzheng; Li, Guangjiu; Sun, Zhenfan

    2013-05-01

    In this paper a platinum (Pt) nanoparticle decorated graphene (GR) nanosheet was synthesized and used for the investigation on direct electrochemistry of myoglobin (Mb). By integrating GR-Pt nanocomposite with Mb on the surface of carbon ionic liquid electrode (CILE), a new electrochemical biosensor was fabricated. UV-Vis absorption and FT-IR spectra indicated that Mb remained its native structure in the nanocomposite film. Electrochemical behaviors of Nafion/Mb-GR-Pt/CILE were investigated with a pair of well-defined redox peak appeared, which indicated that direct electron transfer of Mb was realized on the underlying electrode with the usage of the GR-Pt nanocomposite. The fabricated electrode showed good electrocatalytic activity to the reduction of trichloroacetic acid in the linear range from 0.9 to 9.0 mmol/L with the detection limit as 0.32 mmol/L (3σ), which showed potential application for fabricating novel electrochemical biosensors and bioelectronic devices. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Electrical characterization of gold and platinum thin film electrodes with polyaniline modified surfaces

    Science.gov (United States)

    Aggas, John Richard

    Recent studies into soft organic electronics have burgeoned as a result of discoveries of conducting polymers such as polyaniline, polythiophene, and polypyrrole. However, in order to make these conducting polymers suitable for in vivo soft organic electronics, they must be developed so that they can be biocompatible and provide accurate sensing. Chitosan, a naturally occurring polymer structure found in exoskeletons of crustaceans, has been studied for its biocompatible properties. Composites of polyaniline (PAn), an intrinsically conductive polymer (ICP) and chitosan (Chi), a biopolymer, were developed and applied to gold and platinum Thin Film Electrode (TFE) devices. Electropolymerization and drop cast deposition were utilized to modify TFEs with a thin film of PAn or PAn-Chi composite. The impedance response over a spectrum of frequencies was studied for blank control TFEs, platinized TFEs, and platinized TFEs with various polyaniline coatings. Impedance measurements were taken in dry environments, DI Water, and in buffers such as PBS, and HEPES. Current-Voltage (I-V) characterization was used to study the current response and SEM imaging was used to study the surface topography. Resistance was measured for PAn modified unplatinized gold TFEs with varying amounts of incorporated chitosan. Impedance measurements of control and platinized TFEs yielded results similar to a low pass filter. Due to the conductive nature of polyaniline, the impedance of TFEs decreased substantially after poylaniline deposition. Measured resistance values for polyaniline and chitosan composites on TFEs revealed a window of concentrations of incorporated chitosan to lower resistance.

  3. Temperature-dependent specific heat of suspended platinum nanofilms at 80-380 K

    Science.gov (United States)

    Li, Qin-Yi; Narasaki, Masahiro; Takahashi, Koji; Ikuta, Tatsuya; Nishiyama, Takashi; Zhang, Xing

    2016-11-01

    Metallic nanofilms are important components of nanoscale electronic circuits and nanoscale sensors. The accurate characterization of the thermophysical properties of nanofilms is very important for nanoscience and nanotechnology. Currently, there is very little specific heat data for metallic nanofilms, and the existing measurements indicate distinct differences according to the nanofilm size. The present work reports the specific heats of 40-nm-thick suspended platinum nanofilms at 80-380 K and ˜5×10-4 Pa using the 3ω method. Over 80-380 K, the specific heats of the Pt nanofilms range from 166-304 J/(kg·K), which are 1.65-2.60 times the bulk values, indicating significant size effects. These results are useful for both scientific research in nanoscale thermophysics and evaluating the transient thermal response of nanoscale devices. Project supported by the National Natural Science Foundation of China (Grant Nos. 51327001 and 51636002), and partially supported by CREST, JST, and JSPS KAKENHI (Grant Nos. 16H04280, 26289047, 16K14174, and 16K06126).

  4. Stable and efficient sky-blue organic light emitting diodes employing a tetradentate platinum complex

    Science.gov (United States)

    Li, Guijie; Klimes, Kody; Fleetham, Tyler; Zhu, Zhi-Qiang; Li, Jian

    2017-03-01

    A tetradentate Pt(II) complex platinum (II) [10-(9-(4-tert-butylpyridin-2-yl-κN)-9H-carbazol-2-yl-κC1)-9,10-dihydro-9,9-dimethyl-3-(1H-pyrazol-1-yl-κN2)acridine-1-yl-κC1] (PtN'1N-tBu) incorporating pyrazolyl-acridine as the lumophore was demonstrated to act as a stable and efficient sky-blue emitter. Phosphorescent organic light-emitting diode (OLED) employing PtN'1N-tBu without the electron blocking layer (EBL) achieved a high external quantum efficiency (EQE) of 15.9% and an estimated operational lifetime LT70 of 635 h at an initial luminance of 1000 cd/cm2. The device efficiency could be further improved by adding TrisPCz as EBL, reaching EQE of 17.3% and operational lifetime up to 482 h at 1000 cd/cm2.

  5. Discussion of risks of platinum resources based on a function orientated criticality assessment. Shown by cytostatic drugs and automotive catalytic converters; Diskussion der Risiken der Ressource Platin auf Basis eines um funktionale Faktoren erweiterten Kritikalitaetsassessments. Dargestellt am Beispiel platinhaltiger Zytostatika und Autoabgaskatalysatoren

    Energy Technology Data Exchange (ETDEWEB)

    Thorenz, Andrea; Reller, Armin [University of Augsburg, Chair of Resource Strategy, Environment Science Center, Augsburg (Germany)

    2011-12-15

    The purpose of the study is the enhancement of criticality assessments for resources in order to address function specific factors like dissipation, recycling, bio-activity and toxicity. The developed methodology is applied to platinum-containing cytostatic drugs and automotive catalytic converters. Methods: The study is methodically based on an analysis of resource specific factors like exploration rates, reserves-to-production ratio and regional distribution of exploration areas as well as on the investigation of product/functional depending factors like recycling rates, dissipation rates, bio-diversity and toxicity. Taking into account that economic and ecological risks may occur at any stage of the supply, consumption and dissipation processes, the whole life cycles of the two analyzed products (cytostatic drugs and automotive catalytic converters) are considered. As an approach to reduce potential economic and ecological risks the study is especially focused on recycling strategies. In order to get a better understanding of platinum as an essential resource for the development of our society the history and the cultural impact of the term ''resource'' are introduced. The availability of platinum is crucial for several products of our modern society. Areas of application are e.g. jewellery, automotive catalytic converters, investments (coins, bars), computers, mobile devices, fertilizers and cytostatic drugs. Economic risks are caused by limited sources and dynamic demand of new application areas like fuel cells and drugs. Platinum-containing drugs are used for the treatment of several kinds of cancer such as testicular, breast, colon and prostate. Currently the pharmaceutical industry requires 6,9 tons per year (3 percent of the total demand of platinum). Due to the improvement of medical standards and the ageing society, especially in developing countries, the demand of platinum-containing drugs will rise significantly. The dissipation of

  6. Cytotoxicity of platinum(IV) and platinum(II) complexes containing 1R,2R-cyclohexanediamine as a ligand.

    Science.gov (United States)

    Yamashita, T; Hirose, J; Noji, M; Saito, R; Tomida, H; Kidani, Y

    1993-10-01

    Several Pt(IV) and Pt(II) complexes containing 1R,2R-cyclohexanediamine (1R,2R-dach) as a carrier ligand were synthesized. The cytotoxicities and the uptake of the platinum complexes by leukemia L1210 cells were compared in order to study the correlation between their structures and cytotoxicities. [Pt(II)Cl2(1R,2R-dach)], [(Pt(II)(oxalato)(1R,2R-dach)], and [Pt(II)(malonato)(1R,2R-dach)], which have excellent anticancer properties, exhibited very high cytotoxicities and were easily taken up by leukemia L1210 cells. [Pt(IV)Cl4(1R,2R-dach)], trans(Cl)-[Pt(IV)Cl2(oxalato)(1R,2R-dach)], and trans(Cl)-[Pt(IV)Cl2(malonato)(1R,2R-dach)] also had high cytotoxicities. After a short incubation time, the uptake of [Pt(II)Cl2(1R,2R-dach)], [Pt(II)(oxalato)(1R,2R-dach)], and [Pt(II)(malonato)(1R,2R-dach)] by leukemia L1210 cells were respectively very similar to those of [Pt(IV)Cl4(1R,2R-dach)], trans(Cl)-[Pt(IV)Cl2(oxalato)(1R,2R-dach)], and trans(Cl)-[Pt(IV)Cl2(malonato)(1R,2R-dach)]. In addition, trans(OH)-[Pt(IV)(OH)2Y2(1R,2R-dach)] (Y2: oxalato or malonato) did not exhibit cytotoxicity towards leukemia L1210 cells, whereas trans(Cl)-[Pt(IV)Cl2Y2(1R,2R-dach)] (Y2: oxalato or malonato) were highly cytotoxic. The accumulation of trans(OH)-[Pt(IV)(OH)2Y2(1R,2R-dach)] in leukemia L1210 cells was much lower than that of trans(Cl)-[Pt(IV)Cl2Y2(1R,2R-dach)]. Platinum(IV) complexes, in which leaving groups are replaced by hydroxide groups, have decreased cytotoxic activity, because the hydroxide groups of the platinum(IV) complex reduce the uptake of platinum by the cells. trans(OH),cis(Cl)-[Pt(IV)(OH)2Cl2(1R,2R-dach)], which has hydroxide and chloride groups, was easily incorporated into the cells and exhibited the high cytotoxic activity. This behavior indicates that the chloride group apparently overcomes the ameliorating effect of the hydroxide group.

  7. Isolated High-Purity Platinum Nanowire Growth via Field Emission from a Multi-Walled Carbon Nanotube

    Science.gov (United States)

    Yang, Zhan; Nakajima, Masahiro; Saito, Yahachi; Ode, Yasuhito; Fukuda, Toshio

    2011-03-01

    Isolated high-purity platinum nanowire growth was presented via field emission from the tip of a multi-walled carbon nanotube (MWCNT) with a precursor of cyclopentadienyl-trimethyl-platinum(IV) (CpPtMe3) inside a scanning electron microscope (SEM). A nanomanipulation system was used to adjust the gap between the anode (tungsten probe) and cathode (MWCNT) in order to control the nanowire growth length which achieved a platinum nanowire length of 1.18 µm. The chemical composition of the platinum nanowire analyzed by energy-dispersive X-ray spectroscopy (EDS) shows that the purity of the platinum in the nanowire reaches 94.9 wt %.

  8. Patterned Platinum Etching Studies in an Argon High Density Plasma

    Science.gov (United States)

    Delprat, Sébastien; Chaker, Mohamed; Margot, Joëlle; Pépin, Henri; Tan, Liang; Smy, Tom

    1998-10-01

    A high-density surface-wave Ar plasma operated in the low pressure regime is used to study pure physical etching characteristics of platinum thin films. The platinum samples are RF biased so as to obtain a maximum DC self-bias voltage of 150 V. The sputter-etching characteristics are investigated as a function of the magnetic field intensity, the self-bias voltage and the gas pressure. At 1 mtorr, the etch rate is found to be a unique linear function of both the self-bias voltage and the ion density, independently of the magnetic field intensity value. However, even though the ion density increases, the etch rate is found to decrease with increasing pressure. In the low pressure regime, etch rates as high as 2000 A/min are obtained with a good selectivity over resist. Without any optimization of the etching process, we were able to etch 0.5 micron Pt trenches, 0.6 micron thick yielding fence-free profiles and sidewall angles (75º) that already meets the present industrial requirements of NVRAM technology.

  9. Potentiometric titration of gold, platinum, and some other precious metals

    Energy Technology Data Exchange (ETDEWEB)

    Selig, W.S.

    1991-02-04

    Gold, platinum, and several other platinum metals can be determined by titration with cetylpyridinium chloride (CPC). CPC forms a precipitate with AuCl{sub 4}{sup {minus}} and PtCl{sub 6}{sup 2{minus}}. Differentiation of AuCl{sub 4{minus}} and PtCl{sub 6}{sup 2{minus}} with this titrant is not possible; however, their sum can be determined. Titration with tetraphenylarsonium chloride at pH 1 is selective for tetrachloroaurate, which thus can be determined in the presence of hexachloroplatinate. Hexachloroosmate(IV), tetrachloroplatinite(II), tetrachloropalladate(II), hexachloropalladate(IV), and hexachloroiridate(IV) can also be determined potentiometrically vs. CPC. The indicating electrode is prepared by coating a spectroscopic graphite rod with a solution of poly(vinyl chloride) (PVC) and dioctylphthalate (DOP) in tetrahydrofuran (THF). Gold in gold cyanide plating baths and in potassium aurocyanide can be determined by potentiometric titration vs standard silver nitrate, using a silver ion-selective indicating electrode. The monovalent gold need not be converted to the trivalent state with aqua regia, resulting in a considerable saving of time and effort. Free cyanide and aurocyanide can be titrated sequentially by this method. Chloride does not interfere and can, in fact, also be sequentially determined. 17 refs., 2 figs., 3 tabs.

  10. Palladium and platinum organochalcogenolates and their transformation into metal chalcogenides

    Indian Academy of Sciences (India)

    S Dey; S Narayan; A Singhal; V K Jain

    2000-06-01

    Platinum group metal chalcogenides find extensive applications in catalysis and in the electronic industry. To develop an efficient low temperature clean preparation of these materials, molecular routes have been explored. Thus the chemistry of mononuclear organochalcogenolates of the type [M(ER 1/4)2(PR3)2], binuclear benzylselenolates, [M2Cl2(∼-SeBz)2(PR3)2], allylpalladium complexes [Pd2(μ-ER)2(3-C4H7)2] and palladium/platinum sulphido/selenido-bridged complexes, [M2(μ-E)2L4] (M = Pd or Pt; E = S, Se or Te; L = tertiary phosphine ligand) has been investigated. All the complexes have been characterized by elemental analysis, NMR (1 H, 31P, 77Se, 195Pt) spectroscopy and in some cases by X-ray diffraction. The thermal behaviour of these complexes has been studied by TGA. The pyrolysis of allylpalladium complexes in refluxing xylene yields Pd4E as established by analysis and XRD patterns.

  11. Platinum-induced ototoxicity: a review of prevailing ototoxicity criteria.

    Science.gov (United States)

    Waissbluth, Sofia; Peleva, Emilia; Daniel, Sam J

    2017-03-01

    The antineoplastic agent's cisplatin and carboplatin are widely used as they are highly effective. Unfortunately, ototoxicity is a frequently encountered side effect of platinum-based chemotherapy. Clinically, patients generally develop a progressive, bilateral, and irreversible sensorineural hearing loss. With rising cancer survival rates, a greater proportion of patients are living with the side effects of their chemotherapy treatments. Consequently, the quality of life of cancer survivors has now become a major concern for clinicians. Various classification systems are currently available to grade side effects and provide a guideline for subsequent treatments. An extensive review of the literature revealed that a variety of criteria are used worldwide for grading platinum-induced hearing loss in children and adults, including the National Cancer Institute criteria, Brock's grading system, the American Speech-Hearing-Language Association criteria, the World Health Organization criteria, the Pediatric Oncology Group criteria, and the Muenster classification. Less commonly used criteria include the Chang classification, the Functional Hearing Loss scale, the HIT system (German Hirntumor study grading system), and most recently, the International Society of Pediatric Oncology Boston ototoxicity grading scale. The objective of this review is to evaluate the commonly used ototoxicity criteria and discuss their benefits and limitations.

  12. Synthesis and characterization of novel platinum acetylide oligomers

    Science.gov (United States)

    Cooper, Thomas M.; Krein, Douglas M.; Burke, Aaron R.; McLean, Daniel G.; Rogers-Haley, Joy E.; Slagle, Jonathan; Monahan, Jennifer; Urbas, Augustine

    2008-08-01

    To learn about excited state geometry in biphenyl-containing platinum acetylides, we synthesized a series of compounds that have biphenyl ligands. The ligands consisted of biphenyl(I), the hindered 2'-methyl biphenyl(III) and planar fluorenyl(IV) groups. We also synthesized a "half" complex(II) consisting of one ligand attached to the platinum atom. The optical properties of these compounds were measured by ground state absorption, phosphorescence, ultrafast transient absorption and nanosecond transient absorption spectroscopy. DFT calculations were performed to determine the ground state and triplet state geometries and the lowest triplet energy. TDDFT calculations were performed to determine singlet excited state energies. Compared to the reference compound I, ground state spectra show a blue shift in II and III and red shift in IV, showing the singlet energy is sensitive to conjugation and biphenyl twist angle. Comparison of the phosphorescence spectra of I and II shows the triplet exciton is confined to one ligand. The time behavior of the ultrafast excited state absorption spectrum of I shows a red shift within 1 ps from the initial spectrum. This behavior is not seen in IV. The different behavior suggests formation of the triplet state of I is accompanied by conversion from a non-planar to a planar conformation while IV retains a planar conformation.

  13. Formic Acid Electrooxidation by a Platinum Nanotubule Array Electrode

    Directory of Open Access Journals (Sweden)

    Eric Broaddus

    2013-01-01

    Full Text Available One-dimensional metallic nanostructures such as nanowires, rods, and tubes have drawn much attention for electrocatalytic applications due to potential advantages that include fewer diffusion impeding interfaces with polymeric binders, more facile pathways for electron transfer, and more effective exposure of active surface sites. 1D nanostructured electrodes have been fabricated using a variety of methods, typically showing improved current response which has been attributed to improved CO tolerance, enhanced surface activity, and/or improved transport characteristics. A template wetting approach was used to fabricate an array of platinum nanotubules which were examined electrochemically with regard to the electrooxidation of formic acid. Arrays of 100 and 200 nm nanotubules were compared to a traditional platinum black catalyst, all of which were found to have similar surface areas. Peak formic acid oxidation current was observed to be highest for the 100 nm nanotubule array, followed by the 200 nm array and the Pt black; however, CO tolerance of all electrodes was similar, as were the onset potentials of the oxidation and reduction peaks. The higher current response was attributed to enhanced mass transfer in the nanotubule electrodes, likely due to a combination of both the more open nanostructure as well as the lack of a polymeric binder in the catalyst layer.

  14. Polyaniline-functionalized carbon nanotube supported platinum catalysts.

    Science.gov (United States)

    He, Daping; Zeng, Chao; Xu, Cheng; Cheng, Niancai; Li, Huaiguang; Mu, Shichun; Pan, Mu

    2011-05-03

    Electrocatalytically active platinum (Pt) nanoparticles on a carbon nanotube (CNT) with enhanced nucleation and stability have been demonstrated through introduction of electron-conducting polyaniline (PANI) to bridge the Pt nanoparticles and CNT walls with the presence of platinum-nitride (Pt-N) bonding and π-π bonding. The Pt colloids were prepared through ethanol reduction under the protection of aniline, the CNT was dispersed well with the existence of aniline in the solution, and aniline was polymerized in the presence of a protonic acid (HCl) and an oxidant (NH(4)S(2)O(8)). The synthesized PANI is found to wrap around the CNT as a result of π-π bonding, and highly dispersed Pt nanoparticles are loaded onto the CNT with narrowly distributed particle sizes ranging from 2.0 to 4.0 nm due to the polymer stabilization and existence of Pt-N bonding. The Pt-PANI/CNT catalysts are electroactive and exhibit excellent electrochemical stability and therefore promise potential applications in proton exchange membrane fuel cells.

  15. Chemical Imaging of Platinum-Based Drugs and their Metabolites.

    Science.gov (United States)

    Liu, Xin; Hummon, Amanda B

    2016-12-05

    Platinum-based drugs (cisplatin, carboplatin, and oxaliplatin) are widely used therapeutic agents for cancer treatment. Even though the platinum (Pt)-drugs are routinely used clinically, a clear picture of their distribution within tumor tissues is lacking. The current methods to image the distribution of Pt drugs are limited and do not enable the discrimination of the drug from its metabolites. In this manuscript, we demonstrate a methodology that enables chemical imaging of a Pt drug and its metabolites simultaneously and specifically. Matrix-Assisted Laser Desorption/Ionization (MALDI) Mass Spectrometry Imaging (MSI) is combined with an on-tissue chemical derivatization using diethyldithiocarbamate (DDTC). DDTC abstracts the Pt atom to generate ionizable complexes that can be imaged by MALDI MSI. We demonstrate that Pt drugs and their metabolites can be specifically imaged. This approach was successfully applied to map the penetration and metabolism of oxaliplatin in hyperthermic intraperitoneal chemotherapy (HIPEC)-like treated 3D colorectal tumor mimics. The distribution of cisplatin and carboplatin was mapped in additional 3D tumor mimics. We demonstrate that the approach can also be used to image the distribution of copper ions in cells. This method has the potential to be used to evaluate the penetration and distribution of a wide range of compounds.

  16. Surface segregations in platinum-based alloy nanoparticles

    Science.gov (United States)

    Yamakawa, Shunsuke; Asahi, Ryoji; Koyama, Toshiyuki

    2014-04-01

    A phase-field model that describes the radial distributions of the ordered-disordered phase and surface segregation in a single-alloy nanoparticle is introduced to clarify the overall behavior of surface segregation of various Pt-based alloy nanoparticles. One of the obstacles to apply a platinum-transition metal alloy as a cathode electro-catalyst of a polymer electrolyte fuel cell is the need to ensure the retention of the designed surface composition in an alloy nanoparticle against the alloy combinations, a particle size, and heat treatment. From the results of calculations for CrPt, FePt, CoPt, NiPt, CuPt, PdPt, IrPt, and AuPt binary nanoparticles with diameters below 10 nm at 973.15 K, the compositional variation within a single particle was found to depend on the balance between the atomic interaction within particles and the surface free energy. In addition, the obtained specific steady-state composition of the surface varied significantly with alloy combination and particle diameter. Based on the general tendencies of a binary system to exhibit segregation, attempts to control the amount of platinum segregation on the surface using a ternary-alloy system were examined.

  17. Platinum-group elements: so many excellent properties

    Science.gov (United States)

    Zientek, Michael L.; Loferski, Patricia J.

    2014-01-01

    The platinum-group elements (PGE) include platinum, palladium, rhodium, ruthenium, iridium, and osmium. These metals have similar physical and chemical properties and occur together in nature. The properties of PGE, such as high melting points, corrosion resistance, and catalytic qualities, make them indispensable to many industrial applications. PGE are strategic and critical materials for many nations because they are essential for important industrial applications but are mined in a limited number of places and have no adequate substitutes. Exploration and mining companies have found approximately 104,000 metric tons of PGE (with minor gold) in mineral deposits around the world that could be developed. For PGE, almost all known production and resources are associated with three geologic features: the Bushveld Complex, a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area, Russia. To help predict where PGE supplies might be located, USGS scientists study how and where PGE resources are concentrated in the Earth's crust and use that knowledge to assess the likelihood that undiscovered PGE deposits may exist. Techniques used for assessing mineral resources were developed by the USGS to support the stewardship of Federal lands and evaluate mineral resource availability in a global context. The USGS also compiles statistics and information on the worldwide supply, demand, and flow of PGE. These data are all used to inform U.S. national policymakers.

  18. Developing Central Nervous System and Vulnerability to Platinum Compounds

    Directory of Open Access Journals (Sweden)

    G. Bernocchi

    2011-01-01

    Full Text Available Comparative studies on the effects of the platinum complexes in use or in clinical trials are carried out in order to discover differences in the neurotoxic potential and the reversibility of neurotoxicity. In this paper, we summarized the current literature on neurotoxicity and chemoresistance of cisplatin (cisPt and discussed our recent efforts on the interference of cisPt and a new platinum compound [Pt(O,O′-acac(γ-acac(DMS] (PtAcacDMS, with high specific reactivity with sulphur ligands instead of nucleobases as cisPt, on some crucial events of rat postnatal cerebellum development. The acute effects of drug treatments on cell proliferation and death in the external granular layer and granule cell migration and the late effects on the dendrite growth of Purkinje cells were evaluated. Together with the demonstrated antineoplastic effectiveness in vitro, compared with cisPt, data suggest a lower neurotoxicity of PtAcacDMS, in spite of its presence in the brain that involves considerations on the blood brain barrier permeability.

  19. Platinum nanoparticles: a promising material for future cancer therapy?

    Science.gov (United States)

    Porcel, Erika; Liehn, Samuel; Remita, Hynd; Usami, Noriko; Kobayashi, Katsumi; Furusawa, Yoshiya; Le Sech, Claude; Lacombe, Sandrine

    2010-02-26

    Recently, the use of gold nanoparticles as potential tumor selective radiosensitizers has been proposed as a breakthrough in radiotherapy. Experiments in living cells and in vivo have demonstrated the efficiency of the metal nanoparticles when combined with low energy x-ray radiations (below conventional 1 MeV Linac radiation). Further studies on DNA have been performed in order to better understand the fundamental processes of sensitization and to further improve the method. In this work, we propose a new strategy based on the combination of platinum nanoparticles with irradiation by fast ions effectively used in hadron therapy. It is observed in particular that nanoparticles enhance strongly lethal damage in DNA, with an efficiency factor close to 2 for double strand breaks. In order to disentangle the effect of the nano-design architecture, a comparison with the effects of dispersed metal atoms at the same concentration has been performed. It is thus shown that the sensitization in nanoparticles is enhanced due to auto-amplified electronic cascades inside the nanoparticles, which reinforces the energy deposition in the close vicinity of the metal. Finally, the combination of fast ion radiation (hadron therapy) with platinum nanoparticles should strongly improve cancer therapy protocols.

  20. Sulfur tolerant zeolite supported platinum catalysts for aromatics hydrogenation

    Energy Technology Data Exchange (ETDEWEB)

    Bergem, Haakon

    1997-12-31

    The increased demand for transportation fuels at the expence of heavier fuel oil has forced the refinery industry to expand their conversion capacity with hydrotreating as one of the key processes. A shift towards more diesel powered vehicles along with tightening fuel regulations demanding cleaner fuels has lead to increasing interest in catalytic processes for the manufacturing of such environmentally acceptable fuels. This provides the motivation for this thesis. Its main objective was to study possible catalysts active for desulfurization, hydrogenation, and ring-opening of aromatics all in the presence of sulfur. A close examination of the physical properties and kinetical behaviour of the chosen catalysts has been performed. A high pressure reactor setup was designed and built for activity measurements. Zeolite supported platinum catalysts were prepared and both the metal and acid functions were characterized utilizing various experimental techniques. Hydrogenation of toluene was used as a model reaction and the effect of sulfur adsorption on the activity and kinetic behaviour of the catalysts was investigated. The catalyst samples showed hydrogenation activities comparable to a commercial Pt/Al2O3 catalyst. There were no clear differences in the effect of the various sulfur compounds studied. Platinum supported on zeolite Y gave considerably more sulfur tolerant catalysts compared to Al2O3 as support. 155 refs., 58 figs., 36 tabs.

  1. Novel compliant electrodes based on platinum salt reduction

    Science.gov (United States)

    Delille, Remi; Urdaneta, Mario; Hsieh, Kuangwen; Smela, Elisabeth

    2006-03-01

    A compliant electrode material is presented that was inspired by the electroding process used to manufacture ionic polymer-metal composites (IPMCs). However, instead of an ion-exchange membrane, a UV-curable acrylated urethane elastomer is employed. The electrode material consists of the UV-curable elastomer (Loctite 3108) loaded with tetraammineplatinum(II) chloride salt particles through physical mixing and homogenization. The composite material is made conductive by immersion in a reducing agent, sodium borohydride, which reduces the salt to platinum metal on the surface of the elastomer film. Because the noble metal is mixed into the elastomer precursor as a salt, the amount of UV light absorbed by the precursor is not significantly reduced, and the composite loses little photopatternability. As a result meso-scale electrodes of varying geometries can be formed by exposing the precursor/salt mixture through a mask. The materials are mechanically and electrically characterized. The percolation threshold of the composite is estimated to be 9 vol. % platinum salt, above which the compliant electrode material exhibits a maximum conductivity of 1 S/cm. The composite maintains its electrical conductivity under axial tensile strains of up to 40%.

  2. Evolving concepts in the management of drug resistant ovarian cancer: dose dense chemotherapy and the reversal of clinical platinum resistance.

    Science.gov (United States)

    Pinato, David J; Graham, Janet; Gabra, Hani; Sharma, Rohini

    2013-04-01

    Despite the initially high response rate to standard front-line debulking surgery followed by platinum-based chemotherapy, the relapse rate in ovarian cancer is high and many patients will recur within 6 months of completing platinum based treatment. These patients may still require further chemotherapy despite being considered "platinum resistant". In this setting, response rates to conventionally scheduled second line platinum and non-platinum agents is low, ranging between 5% and 15%. There is an emerging body of evidence that in this scenario, chemotherapeutic activity can be enhanced using unconventionally scheduled "dose-dense" platinum and non-platinum based regimens with improved response rates of up to 65%. Randomised studies to evaluate the impact of this approach on survival in recurrent, platinum resistant disease are urgently required to confirm the promising phase II findings if there is to be a change in the standard of care of patients with platinum resistant disease. In this review we discuss the evolving strategies to overcome resistance in patients with platinum resistant ovarian cancer with a particular focus on alterations in dose schedule as a means of reversing platinum resistance. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Rearrangement of a (dithiolato)platinum(II) complex formed by reaction of cyclic disulfide 7,8-dithiabicyclo[4.2.1]nona-2,4-diene with a platinum(0) complex: Oxidation of the rearranged (dithiolato)platinum(II) complex

    OpenAIRE

    石井, 昭彦

    2007-01-01

    Reaction of the title bicyclic disulfide 16 with [(Ph3P)(2)Pt(eta(2)-C2H4)] (2) yielded the corresponding (dithiolato)platinum(II) complex 17 by oxidative addition. The initial product 17 isomerized at room temperature in a [1,5]-sulfur rearrangement to give another (dithiolato)platinum(II) complex 18 in high isolated yield. Oxidation reactions of 18 with dimethyldioxirane (DMD) provided (sulfenato-thiolato)platinum(II) 23, (sulfinato-thiolato)platinum(II) 24, (sulfenato-sulfinato)platinum(II...

  4. Harnessing chemoselective imine ligation for tethering bioactive molecules to platinum(IV) prodrugs.

    Science.gov (United States)

    Wong, Daniel Yuan Qiang; Lau, Jia Yi; Ang, Wee Han

    2012-05-28

    Platinum(II) anticancer drugs are among the most effective and often used chemotherapeutic drugs. In recent years, there has been increasing interest in exploiting inert platinum(IV) scaffolds as a prodrug strategy to mitigate the limitations of platinum(II) anticancer complexes. In this prodrug strategy, the axial ligands are released concomitantly upon intracellular reduction to the active platinum(II) congener, offering the possibility of conjugating bioactive co-drugs which may synergistically enhance cytotoxicity on cancer cells. Existing techniques of tethering bioactive molecules to the axial positions of platinum(IV) prodrugs suffer from limited scope, poor yields and low reliability. This report explores the applications of current chemoselective ligation chemistries to platinum(IV) anticancer complexes with the aim of addressing the aforementioned limitations. Here, we describe the synthesis of a platinum(IV) complex bearing an aromatic aldehyde functionality and explored the scope of imine ligation with various hydrazide and aminooxy functionalized substrates. As a proof of concept, we tethered a six sequence long peptide mimetic (AMVSEF) of the anti-inflammatory protein, ANXA1.

  5. Platinum Complexes with Edda (Ethylenediamine -N, N - Diacetate Ligands as Potential Anticancer Agents

    Directory of Open Access Journals (Sweden)

    Jurisevic Milena

    2016-12-01

    Full Text Available The design of platinum based drugs is not a new field of interest. Platinum complexes are widely used as anticancer agents and currently, approximately 30 platinum(II and platinum(IV entered into some of the phases of clinical trials. A special place in today’s research belongs to platinum complexes with diammine ligands. A large number of edda (ethylenediamine- N, N’-diacetate-type ligands and their corresponding metal complexes has been successfully synthesized. This article summarizes recent progress in research on edda-type-platinum complexes. Some of these agents achieves better effect compared to the gold standard (cisplatin. It has been shown that there is a possible relationship between the length of the ligand ester group carbon chain and its cytotoxic effect. In most cases the longer the ester chain is the greater is the antitumor activity. Of particular interest are the noticeable effects of some new platinum compound with edda-type ligand on cell lines that are known to have a high level of cisplatin-resistance. Exanimate complexes appear to have a different mode of mechanism of action compared with cisplatin which includes apoptotic and necrotic cell death. There are indications that further investigations of these compounds may be very useful in overcoming the problems associated global cancer statistic.

  6. Mono- and di-bromo platinum(IV) prodrugs via oxidative bromination: synthesis, characterization, and cytotoxicity.

    Science.gov (United States)

    Xu, Zoufeng; Wang, Zhigang; Yiu, Shek-Man; Zhu, Guangyu

    2015-12-14

    Platinum(IV)-based anticancer prodrugs have attracted much attention due to their relative inertness under physiological conditions, being activated inside cells, and their capacity for functionalization with a variety of small-molecule or macromolecule moieties. Novel asymmetric platinum(IV) compounds synthesized through expedient and unique methods are desired. Here we utilize N-bromosuccinimide (NBS) and carry out oxidative bromination on platinum(II) drugs, namely cisplatin, carboplatin, and oxaliplatin, to obtain asymmetric and mono-bromo platinum(IV) prodrugs. Different solvents are used to obtain various compounds, and the compounds are further functionalized. Di-bromo compounds are also obtained through NBS-directed oxidative bromination in ethanol. The crystal structures of representative compounds are discussed, and the reduction potentials of some compounds are examined. A cytotoxicity test shows that the mono- and di-bromo platinum(IV) compounds are active against human ovarian cancer cells. Our study enriches the family of asymmetric platinum(IV) prodrugs and provides with a convenient strategy to obtain brominated platinum(IV) complexes.

  7. Profile of bevacizumab in the treatment of platinum-resistant ovarian cancer: current perspectives

    Directory of Open Access Journals (Sweden)

    McClung EC

    2016-03-01

    Full Text Available E Clair McClung, Robert M WenhamDepartment of Gynecologic Oncology, H. Lee Moffitt Cancer Center, Tampa, FL, USAAbstract: Patients with platinum-resistant ovarian cancer have progression of disease within 6 months of completing platinum-based chemotherapy. While several chemotherapeutic options exist for the treatment of platinum-resistant ovarian cancer, the overall response to any of these therapies is ~10%, with a median progression-free survival of 3–4 months and a median overall survival of 9–12 months. Bevacizumab (Avastin, a humanized, monoclonal antivascular endothelial growth factor antibody, has demonstrated antitumor activity in the platinum-resistant setting and was recently approved by US Food and Drug Administration for combination therapy with weekly paclitaxel, pegylated liposomal doxorubicin, or topotecan. This review summarizes key clinical trials investigating bevacizumab for recurrent, platinum-resistant ovarian cancer and provides an overview of efficacy, safety, and quality of life data relevant in this setting. While bevacizumab is currently the most studied and clinically available antiangiogenic therapy, we summarize recent studies highlighting novel alternatives, including vascular endothelial growth factor-trap, tyrosine kinase inhibitors, and angiopoietin inhibitor trebananib, and discuss their application for the treatment of platinum-resistant ovarian cancer.Keywords: bevacizumab, angiogenesis, ovarian cancer, platinum-resistant ovarian cancer, recurrent ovarian cancer

  8. Fabrication and Characterization of Organic/Inorganic Photovoltaic Device

    Science.gov (United States)

    Guvenc, Ali Bilge

    and electron blocking layer on the anode side of the devices by using them as band energy diagram arranging layer, for absorption improvement with plasmonic effect of the particles, we present colloidal platinum nanoparticles as the surface plasmons. Deoxyribonucleic acid complex layer improved the device performance by improving the charge carrier hopping efficiency of the devices by arranging the band energy diagram in order to collect holes easily and block electrons diffusing to anode electrodes. Colloidal platinum nanoparticles layer improved the device performance by increasing the light-harvesting efficiency of the devices by increasing the rate of photon absorption. This proves that the colloidal platinum nanoparticles can be used as surface plasmons in organic bulk heterojunction photovoltaic devices. Because peak their extinction spectra matches with the peak of absorbance of poly(3-hexylthiophene) (P3HT): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM). Combination of these two novel materials in the same device showed a significant improvement as a 26% increase in the power conversion efficiency of the devices. The research conducted in this dissertation offers promising potential of organic bulk heterojunction photovoltaic devices as one of the clean and affordable alternative energy sources for supplying increasing demand on energy.

  9. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  10. Magnetohydrodynamic device

    Energy Technology Data Exchange (ETDEWEB)

    Gorlin, S.M.; Ljubimov, G.A.; Bitjurin, V.A.; Kovbasjuk, V.I.; Maximenko, V.I.; Medin, S.A.; Barshak, A.E.

    1979-12-25

    A magnetohydrodynamic device having a duct for a conducting gas to flow at an angle with the direction of the magnetic field induction vector is described. The duct is situated in the magnetic system and is provided with a plurality of electrodes adapted to interact electrically with the gas, whereas the cross-sectional shape of the duct working space is bounded by a closed contour formed by a curve inscribed into a rectangle. 1 claim.

  11. Nano-structured Platinum-based Catalysts for the Complete Oxidation of Ethylene Glycol and Glycerol

    Science.gov (United States)

    Falase, Akinbayowa

    Direct alcohol fuel cells are a viable alternative to the traditional hydrogen PEM fuel cell. Fuel versatility, integration with existing distribution networks, and increased safety when handling these fuels increases their appeal for portable power applications. In order to maximize their utility, the liquid fuel must be fully oxidized to CO2 so as to harvest the full amount of energy. Methanol and ethanol are widely researched as potential fuels to power these devices, but methanol is a toxic substance, and ethanol has a much lower energy density than other liquids such as gasoline or glucose. Oxidation of complex fuels is difficult to realize, due to difficulty in breaking carbon-carbon bonding and poisoning of the catalysts by oxidative byproducts. In order to achieve the highest efficiency, an anode needs to be engineered in such a way as to maximize activity while minimizing poisoning effects of reaction byproducts. We have engineered an anode that uses platinum-based catalysts that is capable of completely oxidizing ethylene glycol and glycerol in neutral and alkaline media with little evidence of CO poisoning. We have constructed a hybrid anode consisting of a nano-structured PtRu electrocatayst with an NAD-dependent alcohol dehydrogenase for improved oxidation of complex molecules. A nano-structured PtRu catalyst was used to oxidize ethylene glycol and glycerol in neutral media. In situ infrared spectroscopy was used to verify complete oxidation via CO2 generation. There was no evidence of poisoning by CO species. A pH study was performed to determine the effect of pH on oxidative current. The peak currents did not trend at 60 mV/pH unit as would be expected from the Nernst equation, suggesting that adsorption of fuel to the surface of the electrode is not an electron-transfer step. We synthesized nano-structured PtRu, PtSn, and PtRuSn catalysts for oxidation of ethylene glycol and glycerol in alkaline media. The PtRu electrocatalyst the highest oxidative

  12. Deactivation of platinum catalysts by oxygen 2. Nature of the catalyst deactivation

    Energy Technology Data Exchange (ETDEWEB)

    Dijkgraaf, P.J.M.; Duisters, H.A.M.; Kuster, B.F.M.; van der Wiele, K. (Univ. of Technology, Eindhoven (Netherlands))

    1988-08-01

    The effect of different start-up procedures on the deactivation of a 5% Pt/C catalyst used for the oxidation of D-gluconate has been investigated. Results have been obtained both in a stirred tank reactor for batch experiments and in an apparatus for continuous oxidation processes. The deactivation of the catalyst is not explicable by formation of platinum oxides. A model is proposed for the deactivation of platinum catalysts by oxygen, based on penetration of oxygen atoms into the platinum lattice.

  13. Pharmacogenomics of platinum-based chemotherapy sensitivity in NSCLC: toward precision medicine.

    Science.gov (United States)

    Yin, Ji-Ye; Li, Xi; Zhou, Hong-Hao; Liu, Zhao-Qian

    2016-08-01

    Lung cancer is one of the leading causes of cancer-related death in the world. Platinum-based chemotherapy is the first-line treatment for non-small-cell lung cancer (NSCLC), however, the therapeutic efficiency varies remarkably among individuals. A large number of pharmacogenomics studies aimed to identify genetic variations which can be used to predict platinum response. Those studies are leading NSCLC treatment to the new era of precision medicine. In the current review, we provided a comprehensive update on the main recent findings of genetic variations which can be used to predict platinum sensitivity in the NSCLC patients.

  14. Investigation of mechanical and structural characteristics of platinum and palladium at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Trumie, B. T.; Gomidzelovie, L.; Marjanovic, S. R.; Krstic, V. R.

    2015-03-30

    In order to broaden future application of products based on platinum and palladium a comparative analysis of their high-temperature mechanical properties was performed. Platinum and palladium are of great importance and are widely used in chemical industry, electronics, for making laboratory dishes, to name a few. Mechanical properties of pure metals, such as: tensile strength, creep rate and rupture time were investigated using universal testing machine for tensile testing of materials. Microstructure of samples was investigated by optical microscopy. Based on obtained results it can be concluded that the platinum, compared to palladium, is superior for high-temperature applications. (Author)

  15. In-mine (tunnel-to-tunnel) electrical resistance tomography in South African platinum mines

    CSIR Research Space (South Africa)

    Van Schoor, Abraham M

    2009-12-01

    Full Text Available is considered here; that is, tunnels surrounding an area of interest. These 176 studies, however, essentially represented once-off trial surveys. Sasaki and Matsuo 177 exploited a tunnel-to-surface geometry for ERT investigations in a copper-scarn mine 178... 357 358 CASE STUDY ? WATERVAL PLATINUM MINE 359 Site description 360 In May 2009, an ERT trial survey was conducted at Anglo Platinum?s Waterval Mine 361 near Rustenburg. Waterval Mine is a bord-and-pillar, mechanised operation where the 362 UG2...

  16. A Photoactivatable Platinum(IV) Complex Targeting Genomic DNA and Histone Deacetylases.

    Science.gov (United States)

    Kasparkova, Jana; Kostrhunova, Hana; Novakova, Olga; Křikavová, Radka; Vančo, Ján; Trávníček, Zdeněk; Brabec, Viktor

    2015-11-23

    We report toxic effects of a photoactivatable platinum(IV) complex conjugated with suberoyl-bis-hydroxamic acid in tumor cells. The conjugate exerts, after photoactivation, two functions: activity as both a platinum(II) anticancer drug and histone deacetylase (HDAC) inhibitor in cancer cells. This approach relies on the use of a Pt(IV) pro-drug, acting by two independent mechanisms of biological action in a cooperative manner, which can be selectively photoactivated to a cytotoxic species in and around a tumor, thereby increasing selectivity towards cancer cells. These results suggest that this strategy is a valuable route to design new platinum agents with higher efficacy for photodynamic anticancer chemotherapy.

  17. Reactivity of monofunctional cis-platinum adducts as a function of DNA sequence.

    OpenAIRE

    Malinge, J M; Leng, M

    1988-01-01

    The purpose of this work was to study the chemical reactivity of monofunctional cis-platinum-nucleic acid adducts as a function of nucleic acid sequence. The first part of the paper deals with the formation of these adducts. It is shown that the ternary nucleic acid-cis-platinum-ethidium bromide complexes in which ethidium bromide and nucleotide residues are cross-linked by cis-platinum, are relatively unstable at 37 degrees C. In the presence of acridine, ethidium bromide (but not cis-platin...

  18. Platinum anticancer drugs. From serendipity to rational design.

    Science.gov (United States)

    Monneret, C

    2011-11-01

    The discovery of cis-platin was serendipitous. In 1965, Rosenberg was looking into the effects of an electric field on the growth of Escherichia coli bacteria. He noticed that bacteria ceased to divide when placed in an electric field but what Rosenberg also observed was a 300-fold increase in the size of the bacteria. He attributed this to the fact that somehow the platinum-conducting plates were inducing cell growth but inhibiting cell division. It was later deduced that the platinum species responsible for this was cis-platin. Rosenberg hypothesized that if cis-platin could inhibit bacterial cell division it could also stop tumor cell growth. This conjecture has proven correct and has led to the introduction of cis-platin in cancer therapy. Indeed, in 1978, six years after clinical trials conducted by the NCI and Bristol-Myers-Squibb, the U.S. Food and Drug Administration (FDA) approved cis-platin under the name of Platinol(®) for treating patients with metastatic testicular or ovarian cancer in combination with other drugs but also for treating bladder cancer. Bristol-Myers Squibb also licensed carboplatin, a second-generation platinum drug with fewer side effects, in 1979. Carboplatin entered the U.S. market as Paraplatin(®) in 1989 for initial treatment of advanced ovarian cancer in established combination with other approved chemotherapeutic agents. Numerous platin derivatives have been further developed with more or less success and the third derivative to be approved in 1994 was oxaliplatin under the name of Eloxatin(®). It was the first platin-based drug to be active against metastatic colorectal cancer in combination with fluorouracil and folinic acid. The two others platin-based drugs to be approved were nedaplatin (Aqupla(®)) in Japan and lobaplatin in China, respectively. More recently, a strategy to overcome resistance due to interaction with thiol-containing molecules led to the synthesis of picoplatin in which one of the amines linked to Pt

  19. H{sub 2}/air alkaline membrane fuel cell performance and durability, using novel ionomer and non-platinum group metal cathode catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Piana, Michele; Boccia, Massimiliano; Filpi, Antonio; Flammia, Elisa; Miller, Hamish A.; Orsini, Marco; Salusti, Francesca; Santiccioli, Serena [Acta S.p.A., Fuel cell Technology, via di Lavoria 56/G, I-56042 Crespina (PI) (Italy); Ciardelli, Francesco; Pucci, Andrea [Department of Chemistry and Industrial Chemistry, University of Pisa, Via, Risorgimento 35, I-56126 Pisa (Italy)

    2010-09-15

    The development of H{sub 2}/air alkaline membrane fuel cells (AMFCs) enables the use of non-platinum group metal (PGM) catalysts which are intrinsically stable and have an activity similar to platinum in alkaline media for the oxygen reduction reaction (ORR). As opposed to PEMFCs, the research and development of these types of catalysts for AMFC has had little attention and even less has been given to the development of alkaline membranes and ionomers. Acta S.p.A. has developed recently new non-PGM ORR catalysts with activity higher than Pt in alkaline media. More importantly, a new anionic ionomer derived from cheap starting materials with optimum performance has been produced. In this paper we demonstrate the use of this new ionomer in H{sub 2}/air AMFCs showing the first polarization and durability data, with current densities higher than those recently reported in the literature. Furthermore, we report the effect of CO{sub 2} on AMFC performance, showing the possibility of use of such alkaline devices not only in outer-space applications, but also with atmospheric air for large scale devices. (author)

  20. Electrooptical devices

    Science.gov (United States)

    Hurwitz, C. E.

    1980-03-01

    This report covers work carried out with support of the Department of the Air Force during the period 1 October 1979 through 31 March 1980. A part of this support was provided by the Rome Air Development Center. CW operation at temperatures up to 55 C has been achieved for GaInAsP/InP double-heterostructure (DH) lasers emitting at 1.5 micrometers, which were grown without a GaInAsP buffer layer. These devices are of interest for use as sources in fiber-optics communications systems, since the lowest transmission loss reported for fused-silica optical fibers occurs at 1.55 micrometers. Surface passivation techniques developed for InP and GaInAsP avalanche photodiodes have resulted in reductions of dark current as large as four orders of magnitude, to values as low as .0000016 A/sq cm at 0.9 V(b) where V(b) is the breakdown voltage. Devices consisting entirely of InP have been passivated with plasma-deposited Si3N4, and those with a GaInAsP layer but with the p-n junction in InP have been passivated with polyimide. Neither of these techniques successfully reduces dark currents in devices with the p-n junction in the GaInAsP, but a film of photoresist sprayed with SF6 as the propellant has given excellent results. The electrical characteristics in InP ion implanted with Sn, Ge, Si, and C have been investigated. All of these column IV elements yielded n-type conductivity and Sn, Ge, and Si showed high electrical activation; however, implanted C was found to have a net electrical activation of only about 5 percent.

  1. Electrocatalytic activity of platinum nanoparticles supported on nanosilicon

    Energy Technology Data Exchange (ETDEWEB)

    Miu, M.; Kleps, I.; Danila, M.; Ignat, T.; Simion, M.; Bragaru, A.; Dinescu, A. [Laboratory of Nanotechnology, National Institute for Research and Development in Microtechnologies, Bucharest (Romania)

    2010-04-15

    Platinum (Pt) nanocatalysts were deposited on/inside of nanostructured silicon (nanoSi) matrix using physico-chemical methods, i.e. E-beam high vacuum Pt thin film and, respectively, chemically loaded Pt nanoparticles from hexachloroplatinic acid aqueous or alcoholic precursor solutions. High resolution morphological characterisations, completed by microstructural and compositional analyses have been performed to characterise the nanoSi catalyst support and to investigate the Pt thin film nanostructuration as well as the nanoparticle attachment and clustering processes, evidencing the controlling factors and conditions of the size, morphology and distribution. Furthermore, the experimental structures have been subjected to different electrochemical tests and it was revealed that significant improvement of the long term catalyst stability was achieved when the metal-porous Si nanoassemblies is formed, which represents a step closer to the realisation of the monolithic integrated Si-based microfabricated fuel cell. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  2. Bent Dinuclear Platinum(II Halo-Bridged Carbonyl Complexes

    Directory of Open Access Journals (Sweden)

    Fabio Marchetti

    2011-07-01

    Full Text Available Crystals of trans-Pt2(μ-X2X2(CO2 (X = Br, I have been grown and their molecular and crystalline structures have been solved by X-ray diffraction methods. In both cases the dinuclear molecules are bent, with a bending angle of 164.6° and 156.5° for the bromide and the iodide, respectively. While the structure of the bromo-derivative is reported here for the first time, a modification of trans-Pt2(μ-I2I2(CO2 with planar centrosymmetric molecules is known. This appears to be a rare case of a platinum(II halo-bridged derivative structurally characterized in both bent and planar forms.

  3. Green Synthesis, Characterization and Uses of Palladium/Platinum Nanoparticles

    Science.gov (United States)

    Siddiqi, Khwaja Salahuddin; Husen, Azamal

    2016-11-01

    Biogenic synthesis of palladium (Pd) and platinum (Pt) nanoparticles from plants and microbes has captured the attention of many researchers because it is economical, sustainable and eco-friendly. Plant and their parts are known to have various kinds of primary and secondary metabolites which reduce the metal salts to metal nanoparticles. Shape, size and stability of Pd and Pt nanoparticles are influenced by pH, temperature, incubation time and concentrations of plant extract and that of the metal salt. Pd and Pt nanoparticles are broadly used as catalyst, as drug, drug carrier and in cancer treatment. They have shown size- and shape-dependent specific and selective therapeutic properties. In this review, we have discussed the biogenic fabrication of Pd/Pt nanoparticles, their potential application as catalyst, medicine, biosensor, medical diagnostic and pharmaceuticals.

  4. Sum Frequency Generation Studies of Hydrogenation Reactions on Platinum Nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Krier, James M. [Univ. of California, Berkeley, CA (United States)

    2013-08-31

    Sum Frequency Generation (SFG) vibrational spectroscopy is used to characterize intermediate species of hydrogenation reactions on the surface of platinum nanoparticle catalysts. In contrast to other spectroscopy techniques which operate in ultra-high vacuum or probe surface species after reaction, SFG collects information under normal conditions as the reaction is taking place. Several systems have been studied previously using SFG on single crystals, notably alkene hydrogenation on Pt(111). In this thesis, many aspects of SFG experiments on colloidal nanoparticles are explored for the first time. To address spectral interference by the capping agent (PVP), three procedures are proposed: UV cleaning, H2 induced disordering and calcination (core-shell nanoparticles). UV cleaning and calcination physically destroy organic capping while disordering reduces SFG signal through a reversible structural change by PVP.

  5. A Multimethod Approach for Investigating Algal Toxicity of Platinum Nanoparticles

    DEFF Research Database (Denmark)

    Sørensen, Sara Nørgaard; Engelbrekt, Christian; Lützhøft, Hans-Christian Holten

    2016-01-01

    The ecotoxicity of platinum nanoparticles (PtNPs) widely used in for example automotive catalytic converters, is largely unknown. This study employs various characterization techniques and toxicity end points to investigate PtNP toxicity toward the green microalgae Pseudokirchneriella subcapitata...... and Chlamydomonas reinhardtii. Growth rate inhibition occurred in standard ISO tests (EC50 values of 15–200 mg Pt/L), but also in a double-vial setup, separating cells from PtNPs, thus demonstrating shading as an important artifact for PtNP toxicity. Negligible membrane damage, but substantial oxidative stress...... was detected at 0.1–80 mg Pt/L in both algal species using flow cytometry. PtNPs caused growth rate inhibition and oxidative stress in P. subcapitata, beyond what was accounted for by dissolved Pt, indicating NP-specific toxicity of PtNPs. Overall, P. subcapitata was found to be more sensitive toward Pt...

  6. Ototoxicity monitoring in children treated with platinum chemotherapy.

    Science.gov (United States)

    Brooks, Beth; Knight, Kristin

    2017-07-24

    To review the prevalence, mechanisms, clinical presentation, risk factors and implications of platinum-induced ototoxicity in paediatric cancer patients based on published evidence, discuss options for monitoring hearing in young children during treatment and review long-term follow-up guidelines. Narrative literature review. Children treated with cisplatin are at high risk of hearing loss and early, accurate identification of ototoxicity is important for medical decision making and hearing rehabilitation. Challenges of monitoring hearing in young children during cancer treatment and options for monitoring hearing are discussed. Hearing loss has important consequences for the survivors of childhood cancer including communication, learning, cognition and quality of life. Due to the presentation and configuration of ototoxic hearing loss, the test frequencies that are prioritised and the sequence of testing may differ from standard paediatric hearing evaluations. Hearing should be monitored during treatment and after completion of therapy.

  7. Photolysis of an arylalkyl-triazenido-platinum-IV complex

    Science.gov (United States)

    Lippert, T.; Dauth, J.; Deubzer, B.; Weis, J.; Wokaun, A.

    1996-06-01

    The photolytic decomposition of tetrakis(1-phenyl-3-hexyl-triazenido)-platinum(IV) is studied in a variety of media, and found to proceed according to simple first order kinetics. Two excimer laser wavelengths, an excimer-laser pumped dye laser, and a broadband mercury lamp are used for excitation. As referred to the incident power, selective irradiation near the complex-specific absorption maximum is found to be most efficient for inducing the photolytic decomposition. A different influence of degassing and oxygen saturation is observed for tetrahydrofurane and for technical siloxane solvents. To elucidate the origins of the observed behaviour, decomposition products of the complex, and products of hydrosilylation reactions catalyzed by this compound, are identified by GC/MS analysis.

  8. Platinum(iv) anticancer prodrugs - hypotheses and facts.

    Science.gov (United States)

    Gibson, Dan

    2016-08-16

    In this manuscript we focus on Pt(iv) anticancer prodrugs. We explore the main working hypotheses for the design of effective Pt(iv) prodrugs and note the exceptions to the common assumptions that are prevalent in the field. Special attention was devoted to the emerging class of "dual action" Pt(iv) prodrugs, where bioactive ligands are conjugated to the axial positions of platinum in order to obtain orthogonal or complementary effects that will increase the efficacy of killing the cancer cells. We discuss the rationale behind the design of the "dual action" prodrugs and the results of the pharmacological studies obtained. Simultaneous release of two bioactive moieties inside the cancer cells often triggers several processes that together determine the fate of the cell. Pt(iv) complexes provide many opportunities for applying new concepts in targeting, synergistic cell killing and exploiting novel nanodelivery systems.

  9. Formic Acid Oxidation at Platinum-Bismuth Clusters

    DEFF Research Database (Denmark)

    Lovic, J. D.; Stevanovic, S. I.; Tripkovic, D. V.

    2014-01-01

    Formic acid oxidation was studied on platinum-bismuth deposits on glassy carbon (GC) substrate. The catalysts of equimolar ratio were prepared by potentiostatic deposition using chronocoulometry. Bimetallic structures obtained by two-step process, comprising deposition of Bi followed by deposition...... of Pt, were characterized by AFM spectroscopy which indicated that Pt crystallizes preferentially onto previously formed Bi particles. The issue of Bi leaching (dissolution) from PtBi catalysts, and their catalytic effect alongside the HCOOH oxidation is rather unresolved. In order to control Bi...... dissolution, deposits were subjected to electrochemical oxidation, in the relevant potential range and supporting electrolyte, prior to use as catalysts for HCOOH oxidation. Anodic striping charges indicated that along oxidation procedure most of deposited Bi was oxidized. ICP mass spectroscopy analysis...

  10. Unsaturated platinum-rhenium cluster complexes. Synthesis, structures and reactivity.

    Science.gov (United States)

    Adams, Richard D; Captain, Burjor; Smith, Mark D; Beddie, Chad; Hall, Michael B

    2007-05-09

    Two new compounds PtRe3(CO)12(PBut3)(micro-H)3, 9, and PtRe2(CO)9(PBut3)(micro-H)2, 10, were obtained from the reaction of Pt(PBut3)2 with Re3(CO)12(micro-H3), 8, at room temperature. Compound 9 contains a butterfly cluster of four metals formed by the insertion of the platinum atom from a Pt(PBut3) group into one of the hydride-bridged metal-metal bonds of 8. The three hydrido ligands are bridging ligands across each of three new Pt-Re bonds. Compound 10 contains a triangular PtRe2 cluster with two hydrido ligands; one bridges a Pt-Re bond, and the other bridges the Re-Re bond. The new compound Pt2Re2(CO)7(PBut3)2(micro-H)2, 11, was obtained from the reaction of 8 with Pt(PBut3)2 in hexane at reflux. Compound 11 was also obtained from 10 by reaction with an additional quantity of Pt(PBut3)2. Compound 11 contains a tetrahedral cluster of four metal atoms with two dynamically active hydrido ligands. A CO ligand on one of the two platinum atoms also exchanges between the two platinum atoms rapidly on the NMR time scale. Compound 11 is electronically unsaturated and was found to add hydrogen at room temperature to form the tetrahydrido cluster complex, Pt2Re2(CO)7(PBut3)2(micro-H)4, 12. Compound 12 has a structure similar to 11 but contains one triply bridging hydrido ligand, two edge bridging hydrido ligands, and one terminal hydrido ligand on one of the two platinum atoms. A kinetic isotope effect D/H of 1.5(1) was determined for the addition of H2 to 11. Hydrogen can be eliminated from 12 by heating to 97 degrees C or by the application of UV-vis irradiation at room temperature. Compound 12 adds CO at room temperature to yield the complex Pt2Re2(CO)8(PBut3)2(micro-H)4, 13, which contains a planar cluster of four metal atoms with a Pt-Pt bond and four edge bridging hydrido ligands. Compounds 11 and 12 react with Pt(PBut3)2 to yield the known five metal cluster complexes Pt3Re2(CO)6(PBut3)3(micro-H)2, 14, and Pt3Re2(CO)6(PBut3)3(micro-H)4, 15, respectively. Density

  11. Self-terminating growth of platinum films by electrochemical deposition.

    Science.gov (United States)

    Liu, Yihua; Gokcen, Dincer; Bertocci, Ugo; Moffat, Thomas P

    2012-12-07

    A self-terminating rapid electrodeposition process for controlled growth of platinum (Pt) monolayer films from a K(2)PtCl(4)-NaCl electrolyte has been developed that is tantamount to wet atomic layer deposition. Despite the deposition overpotential being in excess of 1 volt, Pt deposition was quenched at potentials just negative of proton reduction by an alteration of the double-layer structure induced by a saturated surface coverage of underpotential deposited H (H(upd)). The surface was reactivated for further Pt deposition by stepping the potential to more positive values, where H(upd) is oxidized and fresh sites for the adsorption of PtCl(4)(2-) become available. Periodic pulsing of the potential enables sequential deposition of two-dimensional Pt layers to fabricate films of desired thickness, relevant to a range of advanced technologies.

  12. Investigation of the oxidation of NO over platinum catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Despres, J.; Koebel, M.; Elsener, M.; Wokaun, A.

    2002-03-01

    The oxidation of NO to NO{sub 2} over Pt/SiO{sub 2} was investigated in the temperature range 150-450{sup o}C. Powdered catalysts were prepared by incipient wetness impregnation, followed by calcination and reduction. The feed gas typically contained oxygen, nitrogen monoxide, water and nitrogen. The concentration of NO in the feed was varied at constant concentration of O{sub 2} in order to study its influence on the reaction. A decrease of the conversion with increasing concentration of NO was observed. A similar study was performed with various oxygen concentrations at constant concentration of NO. Oxygen involved in the surface reaction originates from the dissociative chemisorption of O{sub 2} on the platinum surface. (author)

  13. Platinum Group Metal Recycling Technology Development - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence Shore

    2009-08-19

    BASF Catalysts LLC, formerly Engelhard Corporation, has completed a project to recover Pt from PEM fuel cell membrane electrode assemblies. The project, which began in 2003, has met the project objective of an environmentally-friendly, cost-effective method for recovery of platinum without release of hydrogen fluoride. This has been achieved using a combination of milling, dispersion and acid leaching. 99% recovery of Pt was achieved, and this high yield can be scaled up using one vessel for a single leach and rinse. Leaching was been successfully achieved using a 10% solids level, double the original target. At this solids content, the reagent and utility costs represent ~0.35% of the Pt value of a lot, using very conservative assumptions. The main cost of the process is capital depreciation, followed by labor.

  14. Induction of immunogenic cell death by chemotherapeutic platinum complexes.

    Science.gov (United States)

    Wong, Daniel Yuan Qiang; Ong, Wendy Wei Fang; Ang, Wee Han

    2015-05-26

    There is compelling evidence suggesting that the immune-modulating effects of many conventional chemotherapeutics, including platinum-based agents, play a crucial role in achieving clinical response. One way in which chemotherapeutics can engage a tumor-specific immune response is by triggering an immunogenic mode of tumor cell death (ICD), which then acts as an "anticancer vaccine". In spite of being a mainstay of chemotherapy, there has not been a systematic attempt to screen both existing and upcoming Pt agents for their ICD ability. A library of chemotherapeutically active Pt agents was evaluated in an in vitro phagocytosis assay, and no correlation between cytotoxicity and phagocytosis was observed. A Pt(II) N-heterocyclic carbene complex was found to display the characteristic hallmarks of a type II ICD inducer, namely focused oxidative endoplasmic reticulum (ER) stress, calreticulin exposure, and both HMGB1 and ATP release, and thus identified as the first small-molecule immuno-chemotherapeutic agent.

  15. Tin-Platinum catalysts interactions on titania and silica

    Energy Technology Data Exchange (ETDEWEB)

    Nava, N. [Instituto Mexicano del Petroleo Lazaro Cardenas 152, 07730 Mexico, D.F. (Mexico)], E-mail: tnava@imp.mx; Del Angel, P. [Instituto Mexicano del Petroleo Lazaro Cardenas 152, 07730 Mexico, D.F. (Mexico); Salmones, J. [Instituto Politecnico Nacional-ESIQIE UPALM, 07738 Mexico, D.F. (Mexico); Baggio-Saitovitch, E. [Centro Brasileiro de Pesquisas Fisicas, Rua Dr. Xavier Sigaud 150, 22290-180 Rio de Janeiro, Brasil (Brazil); Santiago, P. [Instituto de Fisica, UNAM, Mexico, D. F., 04510 Mexico (Mexico)

    2007-09-30

    Pt-Sn was supported on titania and silica, and the resulting interactions between the components in prepared samples and the resulting interactions between the components before and after treatment with hydrogen were characterized by Moessbauer spectroscopy, X-ray diffraction, Rietveld refinement, high-resolution transmission electron microscopy (HRTEM) and catalytic tests data. Results show the presence of Pt and SnO{sub 2} after calcinations, and Pt{sub 3}Sn, PtSn and PtSn{sub 3} after reduction. Rietveld analysis shows that some Ti{sup 4+} are replaced by Sn{sup 4+} atoms in the titania structure. Finally, HRTEM and the practically absence of activity observed confirms that metallic platinum is encapsulated.

  16. Thermal and photochemical reactions of diphosphine-platinum(II) carboxylates

    Energy Technology Data Exchange (ETDEWEB)

    Siria, J.W.

    1993-01-01

    Theoretical calculations have been described which suggest that activation in an angular ML[sub 4] species was achieved through a destabilized d[sub yx] molecular orbital. A d[sup 10] PtL[sub 2] system, where L[sub 2] is a chelating phosphine which maintains the fragment in a [open quotes]bent[close quotes] orientation, also has a high-lying d[sub yx] level and should be a viable candidate for such reaction. Platinum phosphine complexes are readily observed using [sup 31]P nuclear magnetic resonance spectroscopy, thus formation of a diphosphineplatinum(II) fragment may demonstrate catalytic activity while providing a convenient means for characterization. The author performed a series of experiments involving photodissociation of the oxalate ligand from [Pt(dppe)(C[sub 2]O[sub 4])]. In the presence of methanol, photolysis led to the formation of [Pt(dppe)(Co[sub 2]Me)[sub 2

  17. Observation of Single Colloidal Platinum Nanocrystal Growth Trajectories

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Haimei; Smith, Rachel; Jun, Young-wook; Kisielowski, Christian; Dahmen, Ulrich; Alivisatos, A. Paul

    2009-02-09

    It is conventionally assumed that the growth of monodisperse colloidal nanocrystals requires a temporally discrete nucleation followed by monomer attachment onto the existing nuclei. However, recent studies have reported violations of this classical growth model, and have suggested that inter-particle interactions are also involved during the growth. Mechanisms of nanocrystal growth still remain controversial. Using in situ transmission electron microscopy, we show that platinum nanocrystals can grow either by monomer attachment from solution onto the existing particles or by coalescence between the particles. Surprisingly, an initially broad size distribution of the nanocrystals can spontaneously narrow. We suggest that nanocrystals take different pathways of growth based on their size- and morphology-dependent internal energies. These observations are expected to be highly relevant for other nanocrystal systems.

  18. FOLFOX Induced Takotsubo Cardiomyopathy Treated with Impella Assist Device

    Directory of Open Access Journals (Sweden)

    Swethika Sundaravel

    2017-01-01

    Full Text Available Chemotherapy induced cardiotoxicity is becoming increasingly prevalent with several new agents being used recently. The incidence of Takotsubo cardiomyopathy due to 5-fluorouracil based chemotherapeutic regimens like FOLFOX is not uncommon. It is also seen with platinum based chemotherapy. Most of these patients have reversible cardiotoxicity and the cardiac function recovers within a short period with supportive treatment. Here we have a patient who presented with cardiogenic shock after 5 days of receiving FOLFOX regimen for colorectal adenocarcinoma. She was treated with a percutaneous left ventricular assist device, Impella CP, for hemodynamic support with excellent outcome.

  19. Tissue cell assisted fabrication of tubular catalytic platinum microengines

    Science.gov (United States)

    Wang, Hong; Moo, James Guo Sheng; Pumera, Martin

    2014-09-01

    We report a facile platform for mass production of robust self-propelled tubular microengines. Tissue cells extracted from fruits of banana and apple, Musa acuminata and Malus domestica, are used as the support on which a thin platinum film is deposited by means of physical vapor deposition. Upon sonication of the cells/Pt-coated substrate in water, microscrolls of highly uniform sizes are spontaneously formed. Tubular microengines fabricated with the fruit cell assisted method exhibit a fast motion of ~100 bodylengths per s (~1 mm s-1). An extremely simple and affordable platform for mass production of the micromotors is crucial for the envisioned swarms of thousands and millions of autonomous micromotors performing biomedical and environmental remediation tasks.We report a facile platform for mass production of robust self-propelled tubular microengines. Tissue cells extracted from fruits of banana and apple, Musa acuminata and Malus domestica, are used as the support on which a thin platinum film is deposited by means of physical vapor deposition. Upon sonication of the cells/Pt-coated substrate in water, microscrolls of highly uniform sizes are spontaneously formed. Tubular microengines fabricated with the fruit cell assisted method exhibit a fast motion of ~100 bodylengths per s (~1 mm s-1). An extremely simple and affordable platform for mass production of the micromotors is crucial for the envisioned swarms of thousands and millions of autonomous micromotors performing biomedical and environmental remediation tasks. Electronic supplementary information (ESI) available: Related video. See DOI: 10.1039/c4nr03720k

  20. p53 protein aggregation promotes platinum resistance in ovarian cancer.

    Science.gov (United States)

    Yang-Hartwich, Y; Soteras, M G; Lin, Z P; Holmberg, J; Sumi, N; Craveiro, V; Liang, M; Romanoff, E; Bingham, J; Garofalo, F; Alvero, A; Mor, G

    2015-07-01

    High-grade serous ovarian carcinoma (HGSOC), the most lethal gynecological cancer, often leads to chemoresistant diseases. The p53 protein is a key transcriptional factor regulating cellular homeostasis. A majority of HGSOCs have inactive p53 because of genetic mutations. However, genetic mutation is not the only cause of p53 inactivation. The aggregation of p53 protein has been discovered in different types of cancers and may be responsible for impairing the normal transcriptional activation and pro-apoptotic functions of p53. We demonstrated that in a unique population of HGSOC cancer cells with cancer stem cell properties, p53 protein aggregation is associated with p53 inactivation and platinum resistance. When these cancer stem cells differentiated into their chemosensitive progeny, they lost tumor-initiating capacity and p53 aggregates. In addition to the association of p53 aggregation and chemoresistance in HGSOC cells, we further demonstrated that the overexpression of a p53-positive regulator, p14ARF, inhibited MDM2-mediated p53 degradation and led to the imbalance of p53 turnover that promoted the formation of p53 aggregates. With in vitro and in vivo models, we demonstrated that the inhibition of p14ARF could suppress p53 aggregation and sensitize cancer cells to platinum treatment. Moreover, by two-dimensional gel electrophoresis and mass spectrometry we discovered that the aggregated p53 may function uniquely by interacting with proteins that are critical for cancer cell survival and tumor progression. Our findings help us understand the poor chemoresponse of a subset of HGSOC patients and suggest p53 aggregation as a new marker for chemoresistance. Our findings also suggest that inhibiting p53 aggregation can reactivate p53 pro-apoptotic function. Therefore, p53 aggregation is a potential therapeutic target for reversing chemoresistance. This is paramount for improving ovarian cancer patients' responses to chemotherapy, and thus increasing their

  1. New platinum(II complexes with benzothiazole ligands

    Directory of Open Access Journals (Sweden)

    José A. Carmona-Negrón

    2016-03-01

    Full Text Available Four new platinum(II complexes, namely tetraethylammonium tribromido(2-methyl-1,3-benzothiazole-κNplatinate(II, [NEt4][PtBr3(C8H7NS] (1, tetraethylammonium tribromido(6-methoxy-2-methyl-1,3-benzothiazole-κNplatinate(II, [NEt4][PtBr3(C9H9NOS] (2, tetraethylammonium tribromido(2,5,6-trimethyl-1,3-benzothiazole-κNplatinate(II, [NEt4][PtBr3(C10H11NS] (3, and tetraethylammonium tribromido(2-methyl-5-nitro-1,3-benzothiazole-κNplatinate(II, [NEt4][PtBr3(C8H6N2O2S] (4, have been synthesized and structurally characterized by single-crystal X-ray diffraction techniques. These species are precursors of compounds with potential application in cancer chemotherapy. All four platinum(II complexes adopt the expected square-planar coordination geometry, and the benzothiazole ligand is engaged in bonding to the metal atom through the imine N atom (Pt—N. The Pt—N bond lengths are normal: 2.035 (5, 2.025 (4, 2.027 (5 and 2.041 (4 Å for complexes 1, 2, 3 and 4, respectively. The benzothiazole ligands are positioned out of the square plane, with dihedral angles ranging from 76.4 (4 to 88.1 (4°. The NEt4 cation in 3 is disordered with 0.57/0.43 occupancies.

  2. Engineering Platinum Alloy Electrocatalysts in Nanoscale for PEMFC Application

    Energy Technology Data Exchange (ETDEWEB)

    He, Ting [Idaho National Laboratory

    2016-03-01

    Fuel cells are expected to be a key next-generation energy source used for vehicles and homes, offering high energy conversion efficiency and minimal pollutant emissions. However, due to large overpotentials on anode and cathode, the efficiency is still much lower than theoretically predicted. During the past decades, considerable efforts have been made to investigate synergy effect of platinum alloyed with base metals. But, engineering the alloy particles in nanoscale has been a challenge. Most important challenges in developing nanostructured materials are the abilities to control size, monodispersity, microcomposition, and even morphology or self-assembly capability, so called Nanomaterials-by-Design, which requires interdisciplinary collaborations among computational modeling, chemical synthesis, nanoscale characterization as well as manufacturing processing. Electrocatalysts, particularly fuel cell catalysts, are dramatically different from heterogeneous catalysts because the surface area in micropores cannot be electrochemically controlled on the same time scale as more transport accessible surfaces. Therefore, electrocatalytic architectures need minimal microporous surface area while maximizing surfaces accessible through mesopores or macropores, and to "pin" the most active, highest performance physicochemical state of the materials even when exposed to thermodynamic forces, which would otherwise drive restructuring, crystallization, or densification of the nanoscale materials. In this presentation, results of engineering nanoscale platinum alloy particles down to 2 ~ 4 nm will be discussed. Based on nature of alloyed base metals, various synthesis technologies have been studied and developed to achieve capabilities of controlling particle size and particle microcomposition, namely, core-shell synthesis, microemulsion technique, thermal decomposition process, surface organometallic chemical method, etc. The results show that by careful engineering the

  3. Platinum nanoparticles induce damage to DNA and inhibit DNA replication

    Science.gov (United States)

    Nejdl, Lukas; Kudr, Jiri; Moulick, Amitava; Hegerova, Dagmar; Ruttkay-Nedecky, Branislav; Gumulec, Jaromir; Cihalova, Kristyna; Smerkova, Kristyna; Dostalova, Simona; Krizkova, Sona; Novotna, Marie; Kopel, Pavel

    2017-01-01

    Sparsely tested group of platinum nanoparticles (PtNPs) may have a comparable effect as complex platinum compounds. The aim of this study was to observe the effect of PtNPs in in vitro amplification of DNA fragment of phage λ, on the bacterial cultures (Staphylococcus aureus), human foreskin fibroblasts and erythrocytes. In vitro synthesized PtNPs were characterized by dynamic light scattering (PtNPs size range 4.8–11.7 nm), zeta potential measurements (-15 mV at pH 7.4), X-ray fluorescence, UV/vis spectrophotometry and atomic absorption spectrometry. The PtNPs inhibited the DNA replication and affected the secondary structure of DNA at higher concentrations, which was confirmed by polymerase chain reaction, DNA sequencing and DNA denaturation experiments. Further, cisplatin (CisPt), as traditional chemotherapy agent, was used in all parallel experiments. Moreover, the encapsulation of PtNPs in liposomes (LipoPtNPs) caused an approximately 2.4x higher of DNA damage in comparison with CisPt, LipoCisPt and PtNPs. The encapsulation of PtNPs in liposomes also increased their antibacterial, cytostatic and cytotoxic effect, which was determined by the method of growth curves on S. aureus and HFF cells. In addition, both the bare and encapsulated PtNPs caused lower oxidative stress (determined by GSH/GSSG ratio) in the human erythrocytes compared to the bare and encapsulated CisPt. CisPt was used in all parallel experiments as traditional chemotherapy agent. PMID:28704436

  4. Formic acid oxidation at platinum-bismuth catalysts

    Directory of Open Access Journals (Sweden)

    Popović Ksenija Đ.

    2015-01-01

    Full Text Available The field of heterogeneous catalysis, specifically catalysis on bimetallic surfaces, has seen many advances over the past few decades. Bimetallic catalysts, which often show electronic and chemical properties that are distinct from those of their parent metals, offer the opportunity to obtain new catalysts with enhanced selectivity, activity, and stability. The oxidation of formic acid is of permanent interest as a model reaction for the mechanistic understanding of the electrooxidation of small organic molecules and because of its technical relevance for fuel cell applications. Platinum is one of the most commonly used catalysts for this reaction, despite the fact that it shows a few significant disadvantages: high cost and extreme susceptibility to poisoning by CO. To solve this problem, several approaches have been used, but generally, they all consist in the modification of platinum with a second element. Especially, bismuth has received significant attention as Pt modifier. According to the results presented in this survey dealing with the effects influencing the formic acid oxidation it was found that two types of Pt-Bi bimetallic catalysts (bulk and low loading deposits on GC showed superior catalytic activity in terms of the lower onset potential and oxidation current density, as well as exceptional stability compared to Pt. The findings in this report are important for the understanding of mechanism of formic acid electrooxidation on a bulk alloy and decorated surface, for the development of advanced anode catalysts for direct formic acid fuel cells, as well as for the synthesis of novel low-loading bimetallic catalysts. The use of bimetallic compounds as the anode catalysts is an effective solution to overcoming the problems of the formic acid oxidation current stability for long term applications. In the future, the tolerance of both CO poisoning and electrochemical leaching should be considered as the key factors in the development

  5. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  6. Uptake of platinum by zebrafish (Danio rerio) and ramshorn snail (Marisa cornuarietis) and resulting effects on early embryogenesis.

    Science.gov (United States)

    Osterauer, Raphaela; Haus, Nadine; Sures, Bernd; Köhler, Heinz-R

    2009-11-01

    Platinum group elements (PGEs), platinum, palladium and rhodium are widely used in automobile catalytic converters. PGEs are emitted into the environment and enter the aquatic ecosystem via runoff rainwater. The present study investigated the bioavailability of platinum chloride for the zebrafish (Danio rerio) and the ramshorn snail (Marisa cornuarietis) and determined the bioaccumulation rate of platinum. Applying the fish early life stage assay for D. rerio (DarT) and the Marisa embryo toxicity test ("Mariett") for M. cornuarietis, effects of platinum chloride on the embryonic development were investigated. Platinum concentrations tested in this study ranged from environmentally relevant concentrations of 38 ng L(-1) up to a concentration of 74.2 microg L(-1) for D. rerio and of 200 ngL(-1) up to 98.7 microg L(-1) for M. cornuarietis. Platinum was found to be accumulated in both organisms. Bioaccumulation factors (BAFs) were in the range of 5-55 for D. rerio and of 218.4-723.9 for M. cornuarietis, depending on the tested Pt concentrations. During the embryonic development, platinum was shown to alter the heart rate of both organisms already at the lowest tested concentration. At higher concentrations, platinum decelerated the hatching rate of the embryos of both species. Additionally, a retardation of the general development and a loss of weight due to platinum exposure was observed in M. cornuarietis. Results of this study contribute important data on the ecotoxicity of a rarely studied element.

  7. Aurora Kinase A expression predicts platinum-resistance and adverse outcome in high-grade serous ovarian carcinoma patients.

    Science.gov (United States)

    Mignogna, Chiara; Staropoli, Nicoletta; Botta, Cirino; De Marco, Carmela; Rizzuto, Antonia; Morelli, Michele; Di Cello, Annalisa; Franco, Renato; Camastra, Caterina; Presta, Ivan; Malara, Natalia; Salvino, Angela; Tassone, Pierfrancesco; Tagliaferri, Pierosandro; Barni, Tullio; Donato, Giuseppe; Di Vito, Anna

    2016-05-21

    High-Grade Serous Ovarian Carcinoma (HGSOC) is the predominant histotype of epithelial ovarian cancer (EOC), characterized by advanced stage at diagnosis, frequent TP53 mutation, rapid progression, and high responsiveness to platinum-based-chemotherapy. To date, standard first-line-chemotherapy in advanced EOC includes platinum salts and paclitaxel with or without bevacizumab. The major prognostic factor is the response duration from the end of the platinum-based treatment (platinum-free interval) and about 10-0 % of EOC patients bear a platinum-refractory disease or develop early resistance (platinum-free interval shorter than 6 months). On these bases, a careful selection of patients who could benefit from chemotherapy is recommended to avoid unnecessary side effects and for a better disease outcome. In this retrospective study, an immunohistochemical evaluation of Aurora Kinase A (AURKA) was performed on 41 cases of HGSOC according to platinum-status. Taking into account the number and intensity of AURKA positive cells we built a predictive score able to discriminate with high accuracy platinum-sensitive patients from platinum-resistant patients (p platinum-resistance and as prognostic factor, that deserves further investigation in prospective clinical trials. Indeed, in the era of personalized medicine, AURKA could assist the clinicians in selecting the best treatment and represent, at the same time, a promising new therapeutic target in EOC treatment.

  8. Fluoropyrimidine and platinum toxicity pharmacogenetics: an umbrella review of systematic reviews and meta-analyses.

    Science.gov (United States)

    Campbell, Jared M; Bateman, Emma; Peters, Micah Dj; Bowen, Joanne M; Keefe, Dorothy M; Stephenson, Matthew D

    2016-03-01

    Fluoropyrimidine (FU) and platinum-based chemotherapies are greatly complicated by their associated toxicities. This umbrella systematic review synthesized all systematic reviews that investigated associations between germline variations and toxicity, with the aim of informing personalized medicine. Systematic reviews are important in pharmacogenetics where false positives are common. Four systematic reviews were identified for FU-induced toxicity and three for platinum. Polymorphisms of DPYD and TYMS, but not MTHFR, were statistically significantly associated with FU-induced toxicity (although only DPYD had clinical significance). For platinum, GSTP1 was found to not be associated with toxicity. This umbrella systematic review has synthesized the best available evidence on the pharmacogenetics of FU and platinum toxicity. It provides a useful reference for clinicians and identifies important research gaps.

  9. Synthesis and characterisation of platinum (II) salphen complex and its interaction with calf thymus DNA

    Energy Technology Data Exchange (ETDEWEB)

    Sukri, Shahratul Ain Mohd; Heng, Lee Yook; Karim, Nurul Huda Abd [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43650 Bangi, Selangor (Malaysia)

    2014-09-03

    A platinum (II) salphen complex was synthesised by condensation reaction of 2,4-dihydroxylbenzaldehyde and o-phenylenediamine with potassium tetrachloroplatinate to obtain N,N′-Bis-4-(hydroxysalicylidene)-phenylenediamine-platinum (II). The structure of the complex was confirmed by {sup 1}H and {sup 13}C NMR spectroscopy, FTIR spectroscopy, CHN elemental analyses and ESI-MS spectrometry. The platinum (II) salphen complex with four donor atoms N{sub 2}O{sub 2} from its salphen ligand coordinated to platinum (II) metal centre were determined. The binding mode and interaction of this complex with calf thymus DNA was determined by UV/Vis DNA titration and emission titration. The intercalation between the DNA bases by π-π stacking due to its square planar geometry and aromatic rings structures was proposed.

  10. Synthesis and characterisation of platinum (II) salphen complex and its interaction with calf thymus DNA

    Science.gov (United States)

    Sukri, Shahratul Ain Mohd; Heng, Lee Yook; Karim, Nurul Huda Abd

    2014-09-01

    A platinum (II) salphen complex was synthesised by condensation reaction of 2,4-dihydroxylbenzaldehyde and o-phenylenediamine with potassium tetrachloroplatinate to obtain N,N'-Bis-4-(hydroxysalicylidene)-phenylenediamine-platinum (II). The structure of the complex was confirmed by 1H and 13C NMR spectroscopy, FTIR spectroscopy, CHN elemental analyses and ESI-MS spectrometry. The platinum (II) salphen complex with four donor atoms N2O2 from its salphen ligand coordinated to platinum (II) metal centre were determined. The binding mode and interaction of this complex with calf thymus DNA was determined by UV/Vis DNA titration and emission titration. The intercalation between the DNA bases by π-π stacking due to its square planar geometry and aromatic rings structures was proposed.

  11. Hydroisomerization of Ethylbenzene on Mordenite-Based Bifunctional Catalysts with Different Platinum Contents

    Directory of Open Access Journals (Sweden)

    Fernandes L.D.

    1998-01-01

    Full Text Available A commercial Na-mordenite sample underwent ion exchange with HCl. The ion-exchanged sample was sequentially submitted to hydrothermal treatments at 823, 873 and 923 K, each followed by acid leaching of the extraframework alumina (EFAL generated. Six mordenite samples, presenting different framework and extraframework compositions, were obtained. These samples were used to prepare bifunctional catalysts by mixing them with Pt/Al2O3 in different proportions. The generated samples presented distinct platinum contents and were tested in the hydroisomerization reaction of ethylbenzene. A maximum xylene selectivity at about 0.45 wt% of platinum was observed. Normally, the total activity increased as the platinum content increased; this effect was more pronounced in the samples which presented lower mesoporosity. The most dealuminated sample, which presented a high mesoporosity, did not show any change in activity with the increase in platinum content.

  12. Dispersive Liquid-Liquid Microextraction and determination of Platinum(IV by High Performance Liquid Chromatography

    Directory of Open Access Journals (Sweden)

    Ali Mazloomifar

    2015-09-01

    Full Text Available A simple, rapid, and efficient procedure, dispersive liquid-liquid microextraction (DLLME, has been developed for the extraction and preconcentration of platinum (IV in environmental water samples. The factors relevant to the microextraction efficiency, such as the kind and volume of extraction and dispersive solvent, the extraction time, the pH in aqueous, and the salt effect, were optimized. Under the optimum conditions , the enrichment factor of this method for platinum was reached at 119. The detection limit for platinum was 0.3 ng mL-1 , and the relative standard deviation (RSD was 0.42% (n = 10 , C = 10 ng mL-1. The method was successfully applied to the determination of trace amounts of platinum in environmental water samples.

  13. Electro-oxidation of Formic Acid on Carbon Supported Edge-Truncated Cubic Platinum Nanoparticles Catalysts

    Institute of Scientific and Technical Information of China (English)

    LI She-Qiang; FU Xing-Qiu; HU Bing; DENG Jia-Jun; CHEN Lei

    2009-01-01

    The oxidation of formic acid on edge-truncated cubic platinum nanoparticles/C catalysts is investigated. X-ray photoelectron spectroscopy analysis indicates that the surface of edge-truncated cubic platinum nanoparticles is composed of two types of coordination sites. The oxidation behavior of formic acid on edge-truncated cubic platinum nanoparticles/C is investigated using cyclic voltammetry. The apparent activation energies are found to be 54.2, 55.0, 61.8, 69.5, 71.9, 69.26, 65.28kJ/mol at 0.15, 0.3, 0.4, 0.5, 0.6, 0.65, 0.7 V, respectively. A specific surface area activity of 1.76mA·cm~(-2) at 0.4 V indicates that the edge-truncated cubic Platinum nanoparticles are a promising anode catalyst for direct formic acid fuel cells.

  14. Bis- and Tetrakis(carboxylato)platinum(IV) complexes with mixed axial ligands - synthesis, characterization, and cytotoxicity.

    Science.gov (United States)

    Hoffmeister, Björn R; Hejl, Michaela; Adib-Razavi, Mahsa S; Jakupec, Michael A; Galanski, Markus; Keppler, Bernhard K

    2015-04-01

    A series of twelve novel diamminetetrakis(carboxylato)platinum(IV) and 18 novel bis(carboxylato)dichlorido(ethane-1,2-diamine)platinum(IV) complexes with mixed axial carboxylato ligands was synthesized and characterized by multinuclear (1) H-, (13) C-, (15) N-, and (195) Pt-NMR spectroscopy. Their cytotoxic potential was evaluated (by MTT assay) against three human cancer cell lines derived from ovarian teratocarcinoma (CH1/PA-1), lung (A549), and colon carcinoma (SW480). In the cisplatin-sensitive CH1/PA-1 cancer cell line, diamminetetrakis(carboxylato)platinum(IV) complexes showed IC50 values in the low micromolar range, whereas, for the most lipophilic compounds of the bis(carboxylato)dichlorido(ethane-1,2-diamine)platinum(IV) series, IC50 values in the nanomolar range were found. Copyright © 2015 Verlag Helvetica Chimica Acta AG, Zürich.

  15. Structure, activity, and stability of platinum alloys as catalysts for the oxygen reduction reaction

    DEFF Research Database (Denmark)

    Vej-Hansen, Ulrik Grønbjerg

    and dealloying due to kinetic barriers, despite the thermodynamic driving force for dissolution. This is followed by our results on trying to decouple the strain and ligand effects for platinum skin structures, and determining whether there is any correlation between adsorption energy and surface stability...... in these systems. We find that there is such a correlation for some adsorbates, indicating that there exists a limit for the stability of an overlayer for a given adsorption strength. Finally, we introduce our work on platinum alloy nanoparticles, and our attempt to isolate the features which result...... in the increased activity that has been seen experimentally. We show how the platinum-platinum distance at the surface is decreased for a variety of alloy phases in the core, with greater compression of the overlayer for core phases with lattice parameters which are either much smaller or much larger than pure...

  16. Electronic metal-support interaction enhanced oxygen reduction activity and stability of boron carbide supported platinum

    Science.gov (United States)

    Jackson, Colleen; Smith, Graham T.; Inwood, David W.; Leach, Andrew S.; Whalley, Penny S.; Callisti, Mauro; Polcar, Tomas; Russell, Andrea E.; Levecque, Pieter; Kramer, Denis

    2017-06-01

    Catalysing the reduction of oxygen in acidic media is a standing challenge. Although activity of platinum, the most active metal, can be substantially improved by alloying, alloy stability remains a concern. Here we report that platinum nanoparticles supported on graphite-rich boron carbide show a 50-100% increase in activity in acidic media and improved cycle stability compared to commercial carbon supported platinum nanoparticles. Transmission electron microscopy and x-ray absorption fine structure analysis confirm similar platinum nanoparticle shapes, sizes, lattice parameters, and cluster packing on both supports, while x-ray photoelectron and absorption spectroscopy demonstrate a change in electronic structure. This shows that purely electronic metal-support interactions can significantly improve oxygen reduction activity without inducing shape, alloying or strain effects and without compromising stability. Optimizing the electronic interaction between the catalyst and support is, therefore, a promising approach for advanced electrocatalysts where optimizing the catalytic nanoparticles themselves is constrained by other concerns.

  17. Investigating the performance of catalyst layer micro-structures with different platinum loadings

    Energy Technology Data Exchange (ETDEWEB)

    Khakaz-Baboli, Moben; Harvey, David; Pharoah, Jon

    2012-07-01

    In this study a four-phase micro-structure of a PEFC catalyst layer was reconstructed by randomly placing overlapping spheres for each solid catalyst phase. The micro-structure was mirrored to make a micro-structure. A body-fit computational mesh was produced for the reconstructed micro-structure in OpenFOAM. Associated conservation equations were solved within all the phases with electrochemical reaction as the boundary condition at the interface between ionomer and platinum phases. The study is focused on the platinum loading of CL. The polarization curves of the micro-structure performance have been compared for different platinum loadings. This paper gives increased insight into the relatively greater losses at decreased platinum loadings.

  18. Intramolecular triplet energy transfer in anthracene-based platinum acetylide oligomers.

    Science.gov (United States)

    Li, Yongjun; Köse, Muhammet E; Schanze, Kirk S

    2013-08-01

    Platinum acetylide oligomers that contain an anthracene moiety have been synthesized and subjected to photophysical characterization. Spectroscopic measurement and DFT calculations reveal that both the singlet and triplet energy levels of the anthracene segment are lower than those of the platinum acetylide segment. Thus, the platinum acetylide segment acts as a sensitizer to populate the triplet state of the anthrancene segment via intramolecular triplet-triplet energy transfer. The objective of this work is to understand the mechanisms of energy-transfer dynamics in these systems. Fluorescence quenching and the dominant triplet absorption that arises from the anthracene segment in the transient absorption spectrum of Pt4An give clear evidence that energy transfer adopts an indirect mechanism, which begins with singlet-triplet energy transfer from the anthracene segment to the platinum acetylide segment followed by triplet-triplet energy transfer to the anthracene segment.

  19. Platinum monolayer electrocatalyst on gold nanostructures on silicon for photoelectrochemical hydrogen evolution.

    Science.gov (United States)

    Kye, Joohong; Shin, Muncheol; Lim, Bora; Jang, Jae-Won; Oh, Ilwhan; Hwang, Seongpil

    2013-07-23

    Pt monolayer decorated gold nanostructured film on planar p-type silicon is utilized for photoelectrochemical H2 generation in this work. First, gold nanostructured film on silicon was spontaneously produced by galvanic displacement of the reduction of gold ion and the oxidation of silicon in the presence of fluoride anion. Second, underpotential deposition (UPD) of copper under illumination produced Cu monolayer on gold nanostructured film followed by galvanic exchange of less-noble Cu monolayer with more-noble PtCl6(2-). Pt(shell)/Au(core) on p-type silicon showed the similar activity with platinum nanoparticle on silicon for photoelectrochemical hydrogen evolution reaction in spite of low platinum loading. From Tafel analysis, Pt(shell)/Au(core) electrocatalyst shows the higher area-specific activity than platinum nanoparticle on silicon demonstrating the significant role of underlying gold for charge transfer reaction from silicon to H(+) through platinum catalyst.

  20. Chemical composition of the ore and occurrence state of the elements in Jingbaoshan platinum- palladium deposit

    Institute of Scientific and Technical Information of China (English)

    SONG Huanbin; HE Mingqin; ZHANG Shangzhong; YI Fenghuang

    2008-01-01

    The Jingbaoshan platinum-palladium deposit is China's largest independent PGM (platinum-group metals) deposit so far discovered. There are eleven kinds of useful components in the ore: Pt, Pd, Os, Ir, Ru, Rh, Au, Ag, Cu, Ni, and Co. The platinum-group elements, gold and silver occur in the form of minerals in ores. twenty-five kinds of precious metal minerals have been found, of which twenty one belong to the platinum-group minerals. The minerals are very small in grain size. Copper occurs mainly as copper sulfide with a small amount of free copper oxide, and the beneficiated copper accounts for 95.21%. Nickel occurs mainly as nickel sulfide, and some nickel silicate and nickel oxide occur in the ore. The beneficiated nickel accounts for 72.03%. Cobalt occurs mainly as cobalt sulfide, and there are some cobalt oxide and other kinds of cobalt. The beneficiated cobalt accounts for 77.58%.

  1. Photoinduced DNA damage and cytotoxicity by a triphenylamine-modified platinum-diimine complex.

    Science.gov (United States)

    Zhang, Zhigang; Dai, Ruihui; Ma, Jiajia; Wang, Shuying; Wei, Xuehong; Wang, Hongfei

    2015-02-01

    Many planar photosensitizers tend to self-aggregate via van der Waals interactions between π-conjugated systems. The self-aggregation of the photosensitizer may reduce the efficiency of the photosensitizer to generate singlet oxygen, thereby diminishing its photodynamic activity. Efforts have been made to improve the photodynamic activity of bis-(o-diiminobenzosemiquinonato)platinum(II) which has planar geometry by the introduction of the sterically hindered triphenylamine moiety into the ligand. Herein we report the photoinduced DNA damage and cytotoxicity by a triphenylamine-modified platinum-diimine complex in red light studied by fluorescence spectra, agarose gel assay and cell viability assay. The results suggest that the triphenylamine-modified platinum-diimine complex has better capability to generate singlet oxygen than bis-(o-diiminobenzosemiquinonato)platinum(II), and it can induce DNA damage in red light, causing high photocytotoxicity in HepG-2 cells in vitro.

  2. Improving the Quality of Thermocouple Wire Made of Platinum-rhodium Alloys

    Institute of Scientific and Technical Information of China (English)

    HORIKOV P.A.; MAMONOV S.N.; EFIMOV V.N.; RADKIN A.N.; DROZDOV D.E.

    2012-01-01

    For the manufacture of S-type thermocouple the so-called thermocouple wire of platinum and platinum-rhodium alloy is used.One of the main technical requirements for the quality of the wire,according to State Standard of Russia (GOST 10821),is the uniformity of its largest thermoelectric force (Thermo-emf) in the length different sections.It was found that a determining impact on the uniformity of the wire thermo-emf is the distribution of rhodium along the length of the wire.The impact of platinum- rhodium melt crystallization conditions on the inhomogeneity of wire manufactured from it.It was suggested that the chemical inhomogeneity of the wire is related to the liquation phase of platinum-rhodium alloy.

  3. Bioinspired hierarchical nanotubular titania immobilized with platinum nanoparticles for photocatalytic hydrogen production.

    Science.gov (United States)

    Liu, Xiaoyan; Li, Jiao; Zhang, Yiming; Huang, Jianguo

    2015-05-11

    A bioinspired nanocomposite composed of platinum nanoparticles and nanotubular titania was fabricated in which the titania matter was templated by natural cellulose substance. The composite possesses three- dimensional hierarchical structures, and ultrafine metallic platinum particles with sizes of ca. 2 nm were immobilized uniformly on the surfaces of the titania nanotubes. Such a nanocomposite with 1.06 wt % of platinum content shows the optimal photocatalytic hydrogen production activity from water splitting of 16.44 mmol h(-1)  g(-1) , and excessive loading of platinum results in poorer photocatalytic performance. The structural integrity of the nanocomposite upon cyclic water-splitting processes results in its sufficient photocatalytic stability.

  4. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  5. Aberrant DNA damage response pathways may predict the outcome of platinum chemotherapy in ovarian cancer.

    Directory of Open Access Journals (Sweden)

    Dimitra T Stefanou

    Full Text Available Ovarian carcinoma (OC is the most lethal gynecological malignancy. Despite the advances in the treatment of OC with combinatorial regimens, including surgery and platinum-based chemotherapy, patients generally exhibit poor prognosis due to high chemotherapy resistance. Herein, we tested the hypothesis that DNA damage response (DDR pathways are involved in resistance of OC patients to platinum chemotherapy. Selected DDR signals were evaluated in two human ovarian carcinoma cell lines, one sensitive (A2780 and one resistant (A2780/C30 to platinum treatment as well as in peripheral blood mononuclear cells (PBMCs from OC patients, sensitive (n = 7 or resistant (n = 4 to subsequent chemotherapy. PBMCs from healthy volunteers (n = 9 were studied in parallel. DNA damage was evaluated by immunofluorescence γH2AX staining and comet assay. Higher levels of intrinsic DNA damage were found in A2780 than in A2780/C30 cells. Moreover, the intrinsic DNA damage levels were significantly higher in OC patients relative to healthy volunteers, as well as in platinum-sensitive patients relative to platinum-resistant ones (all P<0.05. Following carboplatin treatment, A2780 cells showed lower DNA repair efficiency than A2780/C30 cells. Also, following carboplatin treatment of PBMCs ex vivo, the DNA repair efficiency was significantly higher in healthy volunteers than in platinum-resistant patients and lowest in platinum-sensitive ones (t1/2 for loss of γH2AX foci: 2.7±0.5h, 8.8±1.9h and 15.4±3.2h, respectively; using comet assay, t1/2 of platinum-induced damage repair: 4.8±1.4h, 12.9±1.9h and 21.4±2.6h, respectively; all P<0.03. Additionally, the carboplatin-induced apoptosis rate was higher in A2780 than in A2780/C30 cells. In PBMCs, apoptosis rates were inversely correlated with DNA repair efficiencies of these cells, being significantly higher in platinum-sensitive than in platinum-resistant patients and lowest in healthy volunteers (all P<0.05. We conclude

  6. DNA-PK Mediates AKT Activation and Apoptosis Inhibition in Clinically Acquired Platinum Resistance

    Directory of Open Access Journals (Sweden)

    Euan A. Stronach

    2011-11-01

    Full Text Available Clinical resistance to chemotherapy is a frequent event in cancer treatment and is closely linked to poor outcome. High-grade serous (HGS ovarian cancer is characterized by p53 mutation and high levels of genomic instability. Treatment includes platinum-based chemotherapy and initial response rates are high; however, resistance is frequently acquired, at which point treatment options are largely palliative. Recent data indicate that platinumresistant clones exist within the sensitive primary tumor at presentation, implying resistant cell selection after treatment with platinum chemotherapy. The AKT pathway is central to cell survival and has been implicated in platinum resistance. Here, we show that platinum exposure induces an AKT-dependent, prosurvival, DNA damage response in clinically platinum-resistant but not platinum-sensitive cells. AKT relocates to the nucleus of resistant cells where it is phosphorylated specifically on S473 by DNA-dependent protein kinase (DNA-PK, and this activation inhibits cisplatin-mediated apoptosis. Inhibition of DNA-PK or AKT, but not mTORC2, restores platinum sensitivity in a panel of clinically resistant HGS ovarian cancer cell lines: we also demonstrate these effects in other tumor types. Re-sensitization is associated with prevention of AKT-mediated BAD phosphorylation. Strikingly, in patient-matched sensitive cells, we do not see enhanced apoptosis on combining cisplatin with AKT or DNA-PK inhibition. Insulin-mediated activation of AKT is unaffected by DNA-PK inhibitor treatment, suggesting that this effect is restricted to DNA damage–mediated activation of AKT and that, clinically, DNA-PK inhibition might prevent platinum-induced AKT activation without interfering with normal glucose homeostasis, an unwanted toxicity of direct AKT inhibitors.

  7. The Discovery, Use and Impact of Platinum Salts as Chemotherapy Agents for Cancer, vol. 30.

    OpenAIRE

    2007-01-01

    Proposed by Dr Mark Walport (Wellcome Trust) this Seminar examined the discovery, use and impact of platinum salts as chemotherapy agents for cancer. Organized with the assistance of Professor Paul Andrews (St George’s Hospital Medical School) and Dr Tony Woods (Wellcome Trust) and chaired by Professor Sir Kenneth Calman (Durham) the Seminar discussed the serendipitous emergence of platinum salts as widely used anticancer agents from a chance observation in a microbiology laboratory; through ...

  8. Electrochemical behaviour of platinum at polymer-modified glassy carbon electrodes

    Indian Academy of Sciences (India)

    Carmem L P S Zanta; C A Martínez-Huitle

    2007-07-01

    In this paper, the preparations and voltammetric characteristics of chitosan-modified glassy carbon (Ct-MGC) and platinum electrodes are studied. Ct-MGC can be used for pre-concentration and quantification of trace amounts of platinum in solution. At low pH medium, the complex of Pt with protonated group -NH3+ in the chitosan molecule has been confirmed by FT-IR spectra studies.

  9. The influence of platinum washing-out time on its recovery from used auto catalytic converters

    Directory of Open Access Journals (Sweden)

    A. Fornalczyk

    2014-07-01

    Full Text Available The used catalytic converters contain small amounts of precious metals. Recovery of these metals is essential for environmental and economic reasons. This work presents a method of Platinum Group Metals (PGM recovery from auto catalytic converters in which they are washed out by a liquid metal. The magneto-hydro-dynamic pump was used to force circulation of liquid metal under the influence of electromagnetic fields The influence of process time on platinum recovery was also carried out.

  10. Characterization of TiO[sub 2] films modified by platinum doping

    Energy Technology Data Exchange (ETDEWEB)

    Avalle, L.; Santos, E.; Leiva, E.; Macagno, V.A. (Dept. de Fisicoquimica, Univ. Nacional de Cordoba, INFIQC (Argentina))

    1992-10-30

    TiO[sub 2]-Pt films were prepared through galvanostatic platinum deposition from acidic H[sub 2]PtCl[sub 6] solutions, followed by potentiodynamic TiO[sub 2] growth in Na[sub 2]SO[sub 4] solutions. The characterization of the doped films was carried out by means of Auger electron spectroscopy and X-ray photoelectron spectroscopy (XPS) in combination with argon bombardment. The dopant concentration profiles and the valence states of the elements present within the films were also determined. The predominant species present is metallic platinum, although oxidized species probably make some contributions. Titanium changed from TiO[sub 2] to lower oxidation states in going from the surface to the film depth. XPS indicates the presence of hydrated oxides at the surface. Scanning electron microscopy (SEM) analyses indicate that platinum deposition occurs preferentially on grain boundaries. At high platinum content, clusters are evident and the substructure of titanium substrate is reproduced. At low platinum content, SEM cannot detect its presence at the surface in spite of the electrochemical evidence. The electrochemical behaviour of modified oxide films was also analysed. The potentiodynamic response correlates with the response of a polycrystalline platinum electrode. Electron transfer reactions reveal a catalytic effect due to the platinum incorporated into the TiO[sub 2] layer. The oxygen evolution reaction was investigated using impedance as a function of both the platinum content and the thickness of the TiO[sub 2] layer. Finally, an approximate physical model for the system is proposed.

  11. Platinum(iv) N-heterocyclic carbene complexes: their synthesis, characterisation and cytotoxic activity.

    Science.gov (United States)

    Bouché, M; Dahm, G; Wantz, M; Fournel, S; Achard, T; Bellemin-Laponnaz, S

    2016-07-28

    Platinum(ii) N-heterocyclic carbene complexes have been oxidized by bromine or iodobenzene dichloride to provide the fully characterised corresponding platinum(iv) NHC complexes. Antiproliferative activities of Pt(iv) NHC complexes were assayed against several cancer cell lines and the results were correlated with respect to their stability. Mechanistic investigations revealed that mitochondrial dysfunction and ROS production were associated with the cytotoxic process induced by these compounds.

  12. Material and Energy Flows Associated with Select Metals in GREET 2. Molybdenum, Platinum, Zinc, Nickel, Silicon

    Energy Technology Data Exchange (ETDEWEB)

    Benavides, Pahola T. [Argonne National Lab. (ANL), Argonne, IL (United States); Dai, Qiang [Argonne National Lab. (ANL), Argonne, IL (United States); Sullivan, John L. [Argonne National Lab. (ANL), Argonne, IL (United States); Kelly, Jarod C. [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this work, we analyzed the material and energy consumption from mining to production of molybdenum, platinum, zinc, and nickel. We also analyzed the production of solar- and semiconductor-grade silicon. We described new additions to and expansions of the data in GREET 2. In some cases, we used operating permits and sustainability reports to estimate the material and energy flows for molybdenum, platinum, and nickel, while for zinc and silicon we relied on information provided in the literature.

  13. Inhibition of Notch signaling in combination with paclitaxel reduces platinum-resistant ovarian tumor growth

    Directory of Open Access Journals (Sweden)

    Jolijn W Groeneweg

    2014-07-01

    Full Text Available Introduction: Ovarian cancer (OvCa is the most lethal gynecologic malignancy in the United States because of chemoresistant recurrent disease. Our objective was to investigate the efficacy of inhibiting the Notch pathway with a gamma-secretase inhibitor (GSI in an OvCa patient derived xenograft (PDX model as a single agent therapy and in combination with standard chemotherapy.Methods: Immunocompromised mice bearing xenografts derived from clinically platinum sensitive human ovarian serous carcinomas were treated with vehicle, GSI (MRK-003 alone, paclitaxel and carboplatin (P/C alone, or the combination of GSI and P/C. Mice bearing platinum resistant xenografts were given GSI with or without paclitaxel. Gene transcript levels of the Notch pathway target Hes1 were analyzed using RT-PCR. Notch1 and Notch3 protein levels were evaluated. The Wilcoxon rank-sum test was used to assess significance between the different treatment groups. Results: Expression of Notch1 and 3 was variable. GSI alone decreased tumor growth in two of three platinum sensitive ovarian tumors (p < 0.05, as well as in one of three platinum sensitive tumors (p = 0.04. The combination of GSI and paclitaxel was significantly more effective than GSI alone and paclitaxel alone in all platinum resistant ovarian tumors (all p <0.05. The addition of GSI did not alter the effect of P/C in platinum sensitive tumors. Interestingly, although the response of each tumor to chronic GSI exposure did not correlate with its endogenous level of Notch expression, GSI did negatively affect Notch signaling in an acute setting.Conclusions: Inhibiting the Notch signaling cascade with a GSI reduces primary human xenograft growth in vivo. GSI synergized with conventional cytotoxic chemotherapy only in the platinum resistant OvCa models with single agent paclitaxel. These findings suggest inhibition of the Notch pathway in concert with taxane therapy may hold promise for treatment of platinum resistant OvCa.

  14. Influence of Dose on Particle Size and Optical Properties of Colloidal Platinum Nanoparticles

    Directory of Open Access Journals (Sweden)

    Elias Saion

    2012-11-01

    Full Text Available Attempts to produce colloidal platinum nanoparticles by using steady absorption spectra with various chemical-based reduction methods often resulted in the fast disappearance of the absorption maxima leaving reduced platinum nanoparticles with little information on their optical properties. We synthesized colloidal platinum nanoparticles in an aqueous solution of polyvinyl pyrrolidone by gamma radiolytic reduction method, which produced steady absorption spectra of fully reduced and highly pure platinum nanoparticles free from by-product impurities or reducing agent contamination. The average particle size was found to be in the range of 3.4–5.3 nm and decreased with increasing dose due to the domination of nucleation over ion association in the formation of metal nanoparticles by the gamma radiolytic reduction method. The platinum nanoparticles exhibit optical absorption spectra with two absorption peaks centered at about 216 and 264 nm and the peaks blue shifted to lower wavelengths with decreasing particle size. The absorption spectra of platinum nanoparticles were also calculated using quantum mechanical treatment and coincidently a good agreement was obtained between the calculated and measured absorption peaks at various particle sizes. This indicates that the 216 and 264-nm absorption peaks of platinum nanoparticles conceivably originated from the intra-band transitions of conduction electrons of (n = 5, l = 2 and (n = 6, l = 0 energy states respectively to higher energy states. The absorption energies, i.e., conduction band energies of platinum nanoparticles derived from the absorption peaks increased with increasing dose and decreased with increasing particle size.

  15. Electrocatalysts having gold monolayers on platinum nanoparticle cores, and uses thereof

    Science.gov (United States)

    Adzic, Radoslav; Zhang, Junliang

    2010-04-27

    The invention relates to gold-coated particles useful as fuel cell electrocatalysts. The particles are composed of an electrocatalytically active core at least partially encapsulated by an outer shell of gold or gold alloy. The invention more particularly relates to such particles having a noble metal-containing core, and more particularly, a platinum or platinum alloy core. In other embodiments, the invention relates to fuel cells containing these electrocatalysts and methods for generating electrical energy therefrom.

  16. SYNTHESIS OF POLYSILOXANE-SUPPORTED SELENAETHER PLATINUM COMPLEX AND ITS CATALYTIC PROPERTY FOR HYDROSILYLATION OF OLEFINS

    Institute of Scientific and Technical Information of China (English)

    LU Xueran; CHEN Zhen; DUAN Heping; CHEN Yifan

    1996-01-01

    A new type of selenious polymer, silica-bound polybispropoxyethyl-selenidesilsesquioxane,and its platinum complex were synthesized from bis-allyloxyethyl selenide via hydrosilylation with triethoxysilane, followed by immobilized on fumed silica, and then reacting with potassium chloroplatinite under nitrogen atmosphere in acetone. It was found that the platinum complex can catalyze the hydrosilylation of olefins with triethoxysilane effectively. The effects of the nature of the substrate, the amount of complex used, and the reaction temperature on the catalytic activity were investigated.

  17. A NEW TYPE OF CROWN FUNCTIONALIZED POLYSILOXANE AND ITS PLATINUM COMPLEX

    Institute of Scientific and Technical Information of China (English)

    CHEN Yuanyin; HONG Liwu; LI Jun; LU Xueran

    1993-01-01

    A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16- dihydroxy- 1 - thia - 5, 8, 11, 14- tetraoxacycloheptadecane via etherification with ω- chloroundecene, followed by hydrosilylation with triethoxysilane, cohydrolysis with D4, sequentially. Treating the polysiloxane with potassium cholroplatinite, the title complex was obtained. It was found that the platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.

  18. Production of Nanopowders of Platinum Metals Using the Chemical Reduction Method

    Institute of Scientific and Technical Information of China (English)

    PYATAKHINA E. S.; BUSLAYEVA T. M.; VOLCHKOVA E. V.; KHRISTICH E. A.; SERGEYEVA T. Yu.

    2012-01-01

    The literary data on the application of various methods for the production of nanopowders of platinum metals and alloys have been summarized,and the selection of the method of chemical reduction from salt solutions has been substantiated as the simplest and most affordable.The optimum conditions for the production of nanoparticles of metal palladium and platinum/cobalt alloy,using the effect of boranes with various structures,have been selected.

  19. WC as a non-platinum hydrogen evolution electrocatalyst for high temperature PEM water electrolysers

    DEFF Research Database (Denmark)

    Nikiforov, Aleksey; Petrushina, Irina; Christensen, Erik

    2012-01-01

    Tungsten carbide (WC) nanopowder was tested as a non-platinum cathode electrocatalyst for polymer electrolyte membrane (PEM) water electrolysers, operating at elevated temperatures. It was prepared in thermal plasma reactor with confined plasma jet from WO3 precursor in combination with CH4...... carburizing agent. The results of the investigation showed that the activity of tungsten carbide as cathode electrocatalyst increases significantly with temperature and this effect is more pronounced than for platinum, especially, at 150 °C....

  20. On the reactivity of platinum(IV) complexes: Synthesis and spectroscopic studies of platinum(IV) complexes with hypoxanthine

    Science.gov (United States)

    Gaballa, Akmal S.

    2006-01-01

    Na 2[PtCl 6] was found to react with (HypH)Cl·H 2O ( 2) (Hyp=hypoxanthine) in aqueous solution at room temperature yielding (HypH) 2[PtCl 6] ( 3). The same compound was obtained from hexachloroplatinic acid and hypoxanthine. Performing this reaction in methanol at 50 °C complex formation took place yielding the hypoxanthine complex [PtCl 4(Hyp) 2] ( 4). Both compounds were isolated in good yields as faint orange ( 3) and yellow ( 4) precipitates, respectively and characterized by microanalyses, IR and NMR ( 1H, 13C, 195Pt) spectroscopies as well as thermal analysis. Based on the data obtained an octahedral molecular structure is proposed for complex 4 with two hypoxanthine ligands coordinated through N7 to platinum(IV).

  1. Electrophoresis device

    Science.gov (United States)

    Rhodes, P. H.; Snyder, R. S. (Inventor)

    1982-01-01

    A device for separating cellular particles of a sample substance into fractionated streams of different cellular species includes a casing having a distribution chamber, a separation chamber, and a collection chamber. The electrode chambers are separated from the separation chamber interior by means of passages such that flow variations and membrane variations around the slotted portion of the electrode chamber do not enduce flow perturbations into the laminar buffer curtain flowing in the separation chamber. The cellular particles of the sample are separated under the influence of the electrical field and the separation chamber into streams of different cellular species. The streams of separated cells enter a partition array in the collection chamber where they are fractionated and collected.

  2. Stratification devices

    DEFF Research Database (Denmark)

    Andersen, Elsa; Furbo, Simon

    2008-01-01

    heating system. High temperatures in the top of the storage tank established by the energy from the solar collector reduce the use of auxiliary energy. Low temperatures in the bottom of the storage tank improve the operation conditions for the solar collector. Using thermal stratified heat storages...... results in longer operation periods and improved utilization of the solar collector. Thermal stratification can be achieved, for example by using inlet stratification devices at all inlets to the storage tank. This paper presents how thermal stratification is established and utilized by means of inlet......Thermal stratification in the storage tank is extremely important in order to achieve high thermal performance of a solar heating system. High temperatures in the top of the storage tank and low temperatures in the bottom of the storage tank lead to the best operation conditions for any solar...

  3. Photophysics of organometallic platinum(II) derivatives of the diketopyrrolopyrrole chromophore

    KAUST Repository

    Goswami, Subhadip

    2014-12-18

    A pair of diketopyrrolopyrrole (DPP) chromophores that are end-functionalized with platinum containing "auxochromes" were subjected to electrochemical and photophysical study. The chromophores contain either platinum acetylide or ortho-metalated 2-thienylpyridinyl(platinum) end-groups (DPP-Pt(CC) and DPP-Pt(acac), respectively). The ground state redox potentials of the chromophores were determined by solution electrochemistry, and the HOMO and LUMO levels were estimated. The chromophores\\' photophysical properties were characterized by absorption, photoluminescence, and time-resolved absorption spectroscopy on time scales from sub-picoseconds to microseconds. Density functional theory (DFT) computations were performed to understand the molecular orbitals involved in both the singlet and triplet excited state photophysics. The results reveal that in both platinum DPP derivatives the organometallic auxochromes have a significant effect on the chromophores\\' photophysics. The most profound effect is a reduction in the fluorescence yields accompanied by enhanced triplet yields due to spin-orbit coupling induced by the metal centers. The effects are most pronounced in DPP-Pt(acac), indicating that the orthometalated platinum auxochrome is able to induce spin-orbital coupling to a greater extent compared to the platinum acetylide units. (Figure Presented).

  4. In-vitro thrombogenicity assessment of polymer filament modified and native platinum embolic coils.

    Science.gov (United States)

    Girdhar, Gaurav; Read, Megan; Sohn, Jihae; Shah, Chirag; Shrivastava, Sanjay

    2014-04-15

    Embolic coils have been used to treat intracranial aneurysms using an endovascular approach for more than two decades. However, significant aneurysm recanalization rates have been reported specifically in large and giant aneurysms. Adding filaments to bare Platinum coils is considered a modification and has been proposed to achieve higher aneurysm occlusion rates as compared to bare Platinum coils. Quantitative information - in terms of thrombin generation potential of these modifications - is however lacking. We report here in vitro thrombogenicity of Platinum coils containing Nylon (Axium™ MicroFx™ Nylon coil) and PGLA (Axium™ MicroFx™ PGLA coil) filaments and compare them with equivalent bare Platinum Axium™ coils. We utilize a quantitative method that tracks the formation of thrombin upon exposure of the test samples to human platelet rich plasma using a slow binding fluorogenic substrate. We report a significant increase in the total thrombin turnover, the peak thrombin amount and the rate of thrombin generation for the Axium™ MicroFx™ coils and filaments compared to the Axium™ coils and Platinum wire. Nylon and PGLA filaments added to bare Platinum coils increase thrombogenicity of coils. This study offers a robust quantitative method to compare thrombus formation efficacy of embolic coils under static conditions. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Innovative use of platinum compounds to selectively detect live microorganisms by polymerase chain reaction.

    Science.gov (United States)

    Soejima, Takashi; Minami, Jun-Ichi; Xiao, Jin-Zhong; Abe, Fumiaki

    2016-02-01

    PCR cannot distinguish live microorganisms from dead ones. To circumvent this disadvantage, ethidium/propidium-monoazide (EMA/PMA) and psoralen to discriminate live from dead bacteria have been used for 2 decades. These methods require the use of numerous laborious procedures. We introduce an innovative method that uses platinum compounds, which are primarily used as catalysts in organic chemistry and partly used as anti-cancer drugs. Microorganisms are briefly exposed to platinum compounds in vivo, and these compounds penetrate dead (compromised) microorganisms but not live ones and are chelated by chromosomal DNA. The use of platinum compounds permits clear discrimination between live and dead microorganisms in water and milk (including Cronobacter sakazakii and Escherichia coli) via PCR compared with typically used PMA. This platinum-PCR method could enable the specific detection of viable coliforms in milk at a concentration of 5-10 CFU mL(-1) specified by EU/USA regulations after a 4-h process. For sample components, environmental water contains lower levels of PCR inhibitors than milk does, and milk is similar to infant formula, skim milk and blood; thus, the use of the platinum-PCR method could also prevent food poisoning due to the presence of C. sakazakii in dairy products. This method could provide outstanding rapidity for use in environmental/food/clinical tests. Platinum-PCR could also be a substitute for the typical culture-based methods currently used.

  6. Chemistry of Platinum and Palladium Metal Complexes in Homogeneous and Heterogeneous Catalysis: A Mini Review

    Directory of Open Access Journals (Sweden)

    Mehrban Ashiq

    2013-04-01

    Full Text Available Transition metal complexes of platinum and palladium are most widely used in catalysis. Many synthetic reactions have been carried out with such complexes (used as a catalyst which have specifically polymer ligands, through hydrosilylation, acetoxylation, hydrogenation, hydro-formylation, oligo-merisation and polymerization. Almost many platinum and palladium catalysts are heterogeneous in nature i.e. the reaction taking place on a solid surface. Now from few years homogeneous catalysts which are completely soluble in the liquid phase reactant, has acknowledged too much attention, yet having small industrial applications, mainly due to the striving of platinum and palladium complexes separation from the catalytic products. More recently a transitional type of platinum and palladium catalysts have been synthesized through attachment of the activated transition metal complexes on the surface of polymer support particularly insoluble which has been establish to offer encouraging new collection of catalysts for effective research on synthesis. Many of such complexes will be based on the palladium and platinum metals group. The major objective of this review is to inaugurate the relationship among the reactivity’s of homogeneous platinum and palladium complexes and heterogeneous complexes of these metals (those bonded to the surface of metals.

  7. Phase transfer of platinum nanoparticles from aqueous to organic solutions using fatty amine molecules

    Indian Academy of Sciences (India)

    Ashavani Kumar; Hrushikesh M Joshi; Anandrao B Mandale; Rajendra Srivastava; Suguna D Adyanthaya; Renu Pasricha; Murali Sastry

    2004-08-01

    In this report we demonstrate a simple process based on amine chemistry for the phase transfer of platinum nanoparticles from an aqueous to an organic solution. The phase transfer was accomplished by vigorous shaking of a biphasic mixture of platinum nanoparticles synthesised in an aqueous medium and octadecylamine (ODA) in hexane. During shaking of the biphasic mixture, the aqueous platinum nanoparticles complex via either coordination bond formation or weak covalent interaction with the ODA molecules present in the organic phase. This process renders the nanoparticles sufficiently hydrophobic and dispersible in the organic phase. The ODA-stabilised platinum nanoparticles could be separated out from hexane in the form of a powder that is readily redispersible in weakly polar and nonpolar organic solvents. The ODA-capped platinum nanoparticles show high catalytic activity in hydrogenation reactions and this is demonstrated in the efficient conversion of styrene to ethyl benzene. The nature of binding of the ODA molecules to the platinum nanoparticles surface was characterised by thermogravimetry, transmission electron microscopy (TEM), X-ray photoemission spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR).

  8. Production of Platinum Atom Nanoclusters at One End of Helical Plant Viruses

    Directory of Open Access Journals (Sweden)

    Yuri Drygin

    2013-01-01

    Full Text Available Platinum atom clusters (Pt nanoparticles, Pt-NPs were produced selectively at one end of helical plant viruses, tobacco mosaic virus (TMV and potato virus X (PVX, when platinum coordinate compounds were reduced chemically by borohydrides. Size of the platinum NPs depends on conditions of the electroless deposition of platinum atoms on the virus. Results suggest that the Pt-NPs are bound concurrently to the terminal protein subunits and the 5′ end of encapsidated TMV RNA. Thus, a special structure of tobacco mosaic virus and potato X virus particles with nanoparticles of platinum, which looks like a push-pin with platinum head and virus needle, was obtained. Similar results were obtained with ultrasonically fragmented TMV particles. By contrast, the Pt-NPs fully filled the central axial hole of in vitro assembled RNA-free TMV-like particles. We believe that the results presented here will be valuable in the fundamental understanding of interaction of viral platforms with ionic metals and in a mechanism of nanoparticles formation.

  9. Simultaneous Laser Thermal Lens Spectrometric Determination of Trace Platinum and Palladium in an Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    ZHANG,Xiao-Ling(张小玲); YAN,Hong-Tao(阎宏涛)

    2002-01-01

    A selective and sensitive method for determination of platinum and palladium(Ⅱ) in an aqueous solntion simultaneously by laser thermal lens spectrometry, based on the complex reaction of 2- (3,5-dichloropyridylazo)-5- dimethylaminoamiline (3,5-diCl-PADMA) with platinum and palladium, has been developed. It is shown that the palladium complex can be formed at room temperature, while the platinum complex can be only formed after being heated in a boiling water bath. By using this difference of reaction temperature and the characteristic of the complexes mentioned above, the method for simultaneous determination of platinum and palladium was established in an aqueous solution without a pre-separation. The results show that the dynamic linear ranges of determination for platinum and pallladium are 0.005-0.04 μg/mL and 0.005-0.25 μg/mL respectively, and that the detection limits are both 0.002 μg/mL. The method has been applied to the determination of platinum and palladium simultaneously in alloy and catalyst samples with satisfactory results.

  10. Simultaneous Laser Thermal Lens Spectrometric Determination of Trace Platinum and Palladium in an Aquesous Solution

    Institute of Scientific and Technical Information of China (English)

    张小玲; 阎宏涛

    2002-01-01

    A selective and sensitive method for determination of platinum and palladium(Ⅱ)in an aqueous solution simultaneously by laser thermal lens spectrometry,based on the complex reaction of 2-(3,5-dichloropyridylazo)-5-dimethylaminoamiline(3,5-diCl-PADMA) with platinum and palladium,has been developed.It is shown that the palladium complex can be fromed at room temperature, while the platinum complex can be only formed after being heated in a boiling water bath.By using this difference of reaction temperature and the characteristic of the complexes mentioned above,the method for simultaneous determination of platinum and palladium was established in an aqueous solution without a pre-separation.The results show that the dynamic linear ranges of determination for platinum and palladium are 0.005-0.04μg/mL and 0.005-0.25μg/mL respectively,and that the detection limits are both 0.002/μg/mL.The method has been applied to the determination of platinum and palladium simultaneously in alloy and catalyst samples with satisfactory results.

  11. Selective speciation improves efficacy and lowers toxicity of platinum anticancer and vanadium antidiabetic drugs.

    Science.gov (United States)

    Doucette, Kaitlin A; Hassell, Kelly N; Crans, Debbie C

    2016-12-01

    Improving efficacy and lowering resistance to metal-based drugs can be addressed by consideration of the coordination complex speciation and key reactions important to vanadium antidiabetic drugs or platinum anticancer drugs under biological conditions. The methods of analyses vary depending on the specific metal ion chemistry. The vanadium compounds interconvert readily, whereas the reactions of the platinum compounds are much slower and thus much easier to study. However, the vanadium species are readily differentiated due to vanadium complexes differing in color. For both vanadium and platinum systems, understanding the processes as the compounds, Lipoplatin and Satraplatin, enter cells is needed to better combat the disease; there are many cellular metabolites, which may affect processing and thus the efficacy of the drugs. Examples of two formulations of platinum compounds illustrate how changing the chemistry of the platinum will result in less toxic and better tolerated drugs. The consequence of the much lower toxicity of the drug, can be readily realized because cisplatin administration requires hospital stay whereas Lipoplatin can be done in an outpatient manner. Similarly, the properties of Satraplatin allow for development of an oral drug. These forms of platinum demonstrate that the direct consequence of more selective speciation is lower side effects and cheaper administration of the anticancer agent. Therefore we urge that as the community goes forward in development of new drugs, control of speciation chemistry will be considered as one of the key strategies in the future development of anticancer drugs.

  12. Comparative analysis of high temperature strength of platinum and its binary alloys with low content of alloying element

    Directory of Open Access Journals (Sweden)

    Stanković Draško S.

    2012-01-01

    Full Text Available The comparative analysis of platinum and its binary alloys (containing alloying elements up to 10 mass% mechanical properties at high temperatures has been carried out. The goal of the analysis was to investigate new application possibilities for products based on platinum and platinum alloys, and to expand the existing database of platinum metals, originating from the RTB group, Serbia. Palladium, rhodium, ruthenium, iridium and gold were used as alloying elements. In order to examine the effect of alloying elements’ low concentrations on the high-temperature platinum durability, creep rate, rupture time, tensile strength and relative elongation at high temperatures, up to 1400 °C, were determined. In addition, changes in the structure of dislocations were tracked. The summary of investigation results led to conclusion that, of all the alloying elements used, the best influence on high-temperature platinum durability has rhodium.

  13. A cyclically actuated electrolytic drug delivery device

    KAUST Repository

    Yi, Ying

    2015-01-01

    This work, focusing on an implantable drug delivery system, presents the first prototype electrolytic pump that combines a catalytic reformer and a cyclically actuated mode. These features improve the release performance and extend the lifetime of the device. Using our platinum (Pt)-coated carbon fiber mesh that acts as a catalytic reforming element, the cyclical mode is improved because the faster recombination rate allows for a shorter cycling time for drug delivery. Another feature of our device is that it uses a solid-drug-in-reservoir (SDR) approach, which allows small amounts of a solid drug to be dissolved in human fluid, forming a reproducible drug solution for long-term therapies. We have conducted proof-of-principle drug delivery studies using such an electrolytic pump and solvent blue 38 as the drug substitute. These tests demonstrate power-controlled and pulsatile release profiles of the chemical substance, as well as the feasibility of this device. A drug delivery rate of 11.44 ± 0.56 μg min-1 was achieved by using an input power of 4 mW for multiple pulses, which indicates the stability of our system. © The Royal Society of Chemistry 2015.

  14. Electron transfer processes occurring on platinum neural stimulating electrodes: a tutorial on the i(V e) profile

    Science.gov (United States)

    Kumsa, Doe W.; Bhadra, Narendra; Hudak, Eric M.; Kelley, Shawn C.; Untereker, Darrel F.; Mortimer, J. Thomas

    2016-10-01

    The aim of this tutorial is to encourage members of the neuroprosthesis community to incorporate electron transfer processes into their thinking and provide them with the tools to do so when they design and work with neurostimulating devices. The focus of this article is on platinum because it is the most used electrode metal for devices in commercial use. The i(V e) profile or cyclic voltammogram contains information about electron transfer processes that can occur when the electrode-electrolyte interface, V e, is at a specific potential, and assumed to be near steady-state conditions. For the engineer/designer this means that if the potential is not in the range of a specific electron transfer process, that process cannot occur. An i(V e) profile, recorded at sweep rates greater than 0.1 mVs-1, approximates steady-state conditions. Rapid transient potential excursions, like that seen with neural stimulation pulses, may be too fast for the reaction to occur, however, this means that if the potential is in the range of a specific electron transfer process it may occur and should be considered. The approach described here can be used to describe the thermodynamic electron transfer processes on other candidate electrode metals, e.g. stainless steel, iridium, carbon-based, etc.

  15. Electron transfer processes occurring on platinum neural stimulating electrodes: a tutorial on the i(V e) profile.

    Science.gov (United States)

    Kumsa, Doe W; Bhadra, Narendra; Hudak, Eric M; Kelley, Shawn C; Untereker, Darrel F; Mortimer, J Thomas

    2016-10-01

    The aim of this tutorial is to encourage members of the neuroprosthesis community to incorporate electron transfer processes into their thinking and provide them with the tools to do so when they design and work with neurostimulating devices. The focus of this article is on platinum because it is the most used electrode metal for devices in commercial use. The i(V e) profile or cyclic voltammogram contains information about electron transfer processes that can occur when the electrode-electrolyte interface, V e, is at a specific potential, and assumed to be near steady-state conditions. For the engineer/designer this means that if the potential is not in the range of a specific electron transfer process, that process cannot occur. An i(V e) profile, recorded at sweep rates greater than 0.1 mVs(-1), approximates steady-state conditions. Rapid transient potential excursions, like that seen with neural stimulation pulses, may be too fast for the reaction to occur, however, this means that if the potential is in the range of a specific electron transfer process it may occur and should be considered. The approach described here can be used to describe the thermodynamic electron transfer processes on other candidate electrode metals, e.g. stainless steel, iridium, carbon-based, etc.

  16. Irregular-shaped platinum nanoparticles as peroxidase mimics for highly efficient colorimetric immunoassay.

    Science.gov (United States)

    Gao, Zhuangqiang; Xu, Mingdi; Hou, Li; Chen, Guonan; Tang, Dianping

    2013-05-01

    Enzyme-linked immunosorbent assay (ELISA) methods based on natural enzyme-labeled probes have been applied in the immunoassays, but most have some inevitable limitations (e.g. harsh preparation, purification and storage) and are unsuitable for routine use. Herein we synthesized a new class of irregular-shaped platinum nanoparticles (ISPtNP) with a mean length of 7.0 nm and a narrowing width from 2.0 to 5.0 nm along the longitudinal axes, which were utilized as peroxidase-like mimics for the development of colorimetric immunoassays. Compared with bioactive horseradish peroxidase (HRP), the synthesized ISPtNP exhibited a low Km value (~0.12 mM) and a high Kcat value (~2.27×10(4)s(-1)) for 3,3',5,5'-tetramethylbenzidine (TMB) with strong thermal stability and pH tolerance. The catalytic mechanism of the ISPtNP toward TMB/H2O2 was for the first time discussed and deliberated in this work. Based on a sandwich-type assay format, two types of colorimetric immunoassay protocols were designed and developed for the detection of rabbit IgG (RIgG, as a model) by using the synthesized ISPtNP and conventional HRP as the labeling of detection antibodies, respectively. Similar detection limits (LODs) of 2.5 ng mL(-1) vs. 1.0 ng mL(-1) were obtained toward RIgG with the ISPtNP labeling compared to HRP format. Intra- and inter-assay coefficients of variation were less than 13%. Importantly, the ISPtNP-based assay system could be suitable for use in a mass production of miniaturized lab-on-a-chip devices and open new opportunities for protein diagnostics and biosecurity.

  17. Integrated device architectures for electrochromic devices

    Energy Technology Data Exchange (ETDEWEB)

    Frey, Jonathan Mack; Berland, Brian Spencer

    2015-04-21

    This disclosure describes systems and methods for creating monolithically integrated electrochromic devices which may be a flexible electrochromic device. Monolithic integration of thin film electrochromic devices may involve the electrical interconnection of multiple individual electrochromic devices through the creation of specific structures such as conductive pathway or insulating isolation trenches.

  18. Ion exchange equilibria in simultaneous extraction of platinum(II, IV) and rhodium(III) from hydrochloric solutions

    Science.gov (United States)

    Mel'nikov, A. M.; Kononova, O. N.; Pavlenko, N. I.; Krylov, A. S.

    2012-06-01

    Regularities of sorption extraction of platinum(II, IV) and rhodium(III) by anion exchangers of various physical and chemical structure in the presence of hydrochloric media were studied. It is established that AM-2B, Purolite A 500, and Purolite S 985 ionites adsorb complex anions of platinum metals employing mixed mechanism. A high affinity of the studied anionites for the studied complex anions of platinum and rhodium is established.

  19. Liquid Crystals of Dendron-Like Pt Complexes Processable Into Nanofilms Dendrimers. Phase 2. Cholesteric Liquid Crystal Glass Platinum Acetylides

    Science.gov (United States)

    2014-08-01

    ciqa.edu.mx AFOSR FA9550-12-1-0234 August 2014 Cholesteric liquid crystal glass platinum acetylides Eduardo Arias...to be vitrified on cooling and form long time stability cholesteric glasses at room temperature, a series of platinum acetylide complexes modified...OCH3 and F, the cholesteric pitch was determined to be 1.7, 3.4 and 9.0 µ, respectively. INTRODUCTION Platinum acetylides are nonlinear

  20. Recent Progress on the Photonic Properties of Conjugated Organometallic Polymers Built Upon the trans-Bis(para-ethynylbenzene)bis(phosphine)platinum(II) Chromophore and Related Derivatives.

    Science.gov (United States)

    Wong, Wai-Yeung; Harvey, Pierre D

    2010-04-20

    This review article surveys the electronic and photophysical properties of conjugated organometallic polymers built upon the title compound and its related derivatives focussing primarily on systems investigated in our laboratories. The general structure of the polymers is (trans-bis(para-ethynylbenzene)bis(phosphine)platinum(II)-G)(n) where G is a conjugated group such as thiophene, fluorene, carbazole, substituted silole, quinone derivative, and metalloporphyrin residue, or a non-conjugated main-group moiety. Systems based on substituted phenylene units and other related fused rings are also discussed. The phosphine ligands are generally triethyl- or tri-n-butylphosphine groups. These trans-platinum(II) polymers and the corresponding model compounds are compared to the corresponding ortho-derivatives in the quinone series, and the newly prepared paracyclophane-containing polymers. For the porphyrin series, a comparison of fully conjugated oligomers exhibiting the general structure (trans-bis(para-ethynyl(zinc(porphyrin)))bis(phosphine)platinum(II))(n) (i.e., the C(6) H(4) group is absent from the main chain) will be made. This contribution also includes a description of the properties of the mononuclear chromophore itself, properties that define those of the polymers. Potential applications with regard to electronic and optical devices will be highlighted. These soluble and stable materials feature both the processing advantages of polymers and the functionality provided by the presence of metal centers. These multifunctional organometallic polyyne polymers exhibit convenient structural variability as well as optical and electronic properties, which renders them important for use in different research domains as chemical sensors and sensor protectors, as converters for light/electricity signals, and as patternable precursors to magnetic metal alloy nanoparticles.

  1. Laser device

    Science.gov (United States)

    Scott, Jill R.; Tremblay, Paul L.

    2007-07-10

    A laser device includes a target position, an optical component separated a distance J from the target position, and a laser energy source separated a distance H from the optical component, distance H being greater than distance J. A laser source manipulation mechanism exhibits a mechanical resolution of positioning the laser source. The mechanical resolution is less than a spatial resolution of laser energy at the target position as directed through the optical component. A vertical and a lateral index that intersect at an origin can be defined for the optical component. The manipulation mechanism can auto align laser aim through the origin during laser source motion. The laser source manipulation mechanism can include a mechanical index. The mechanical index can include a pivot point for laser source lateral motion and a reference point for laser source vertical motion. The target position can be located within an adverse environment including at least one of a high magnetic field, a vacuum system, a high pressure system, and a hazardous zone. The laser source and an electro-mechanical part of the manipulation mechanism can be located outside the adverse environment. The manipulation mechanism can include a Peaucellier linkage.

  2. Small angle neutron scattering and small angle X-ray scattering studies of platinum-loaded carbon foams

    Indian Academy of Sciences (India)

    P U Sastry; V K Aswal; A G Wagh

    2008-11-01

    The morphology of carbon nanofoam samples comprising platinum nanoparticles dispersed in the matrix was characterized by small angle neutron scattering (SANS) and small angle X-ray scattering (SAXS) techniques. Results show that the structure of pores of carbon matrix exhibits a mass (pore) fractal nature and the average radius of the platinum particles is about 2.5 nm. The fractal dimension as well as the size distribution parameters of platinum particles varies markedly with the platinum content and annealing temperature. Transmission electron micrographs of the samples corroborate the SANS and SAXS results.

  3. Cyclic voltammetric investigations of microstructured and platinum-covered glassy carbon electrodes in contact with a polymer electrolyte membrane

    Energy Technology Data Exchange (ETDEWEB)

    Scherer, G.G.; Veziridis, Z.; Staub, M. [Paul Scherrer Inst. (PSI), Villigen (Switzerland); Freimuth, H. [Inst. fuer Mikrotechnik Mainz IMM, Mainz (Germany)

    1997-06-01

    Model gas diffusion electrodes were prepared by microstructuring glassy carbon surfaces with high aspect ratios and subsequent deposition of platinum. These electrodes were characterized by hydrogen under-potential deposition (H-upd) in contact with a polymer electrolyte membrane employing cyclic voltametry. H-upd was found on platinum areas not in direct contact to the solid electrolyte, as long as a continuous platinum-path existed. A carbon surface between platinum acts as barrier for H-upd. (author) 4 figs., 5 refs.

  4. Facile preparation of mono-, di- and mixed-carboxylato platinum(IV) complexes for versatile anticancer prodrug design.

    Science.gov (United States)

    Zhang, Jenny Z; Bonnitcha, Paul; Wexselblatt, Ezequiel; Klein, Alice V; Najajreh, Yousef; Gibson, Dan; Hambley, Trevor W

    2013-01-28

    Facile strategies were developed for the versatile functionalization of platinum(IV) axial sites, allowing for easy accessibility to unsymmetric mono- and mixed-carboxylato, as well as symmetric di-substituted platinum(IV) complexes. The first method involves the direct oxidation and carboxylation of the platinum(II) center using an appropriate peroxide and the carboxylate of choice to firstly yield a monocarboxylato monohydroxido platinum(IV) complex. This platinum(IV) intermediate can undergo further carboxylation to give rise to a mixed-carboxylato platinum(IV) complex. The second method involves the activation of the carboxylate of choice by a common carbodiimide coupling reagent, and its reaction with a dihydroxido platinum(IV) precursor to give the monocarboxylato platinum(IV) complex. Uronium salts can be employed to promote efficient dicarboxylation of the dihydroxido platinum(IV) precursor. Lastly, an axial azide pendant group was demonstrated to be suitable for orthogonal "click" conjugation reactions. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Platinum group element mineralization of the Svetly Bor and Veresovy Bor clinopyroxenite-dunite massifs, Middle Urals, Russia

    Science.gov (United States)

    Stepanov, S. Yu.; Malitch, K. N.; Kozlov, A. V.; Badanina, I. Yu; Antonov, A. V.

    2017-05-01

    The new data for the geology and mineralogy of the platinum group element (PGE) mineralization related to the chromite-platinum ore zones within the dunite of the Svetly Bor and Veresovy Bor massifs in the Middle Urals are discussed. The geological setting of the chromite-platinum ore zones, their platinum content, compositional and morphological features of the platinum group minerals (PGM) are compared to those within the Nizhny Tagil massif, the world standard of the zonal complexes in the Platinum Ural belt. The chromite-platinum orebodies are spatially related to the contacts between differently granular dunites. Majority of PGM are formed by Pt-Fe alloys that are close in terms of stoichiometry to isoferroplatinum (Pt3Fe), and associated with Os-Ir alloys, Ru-Os and Ir-Rh sulfides, and Ir-Rh thiospinels of the cuproiridsite-cuprorhodsite-ferrorhodsite solid solution. The tetraferroplatinum (PtFe)-tulameenite (PtFe0.5Cu0.5) solid solution and Pt-Cu alloys belong to the later PGM assemblage. The established features of the chromite-platinum ore zones testify to the highly probable identification of the PGE mineralization within the dunite of the Svetly Bor and Vesesovy Bor massifs and could be used in prospecting and exploration for platinum.

  6. Niraparib Maintenance Therapy in Platinum-Sensitive, Recurrent Ovarian Cancer.

    Science.gov (United States)

    Mirza, Mansoor R; Monk, Bradley J; Herrstedt, Jørn; Oza, Amit M; Mahner, Sven; Redondo, Andrés; Fabbro, Michel; Ledermann, Jonathan A; Lorusso, Domenica; Vergote, Ignace; Ben-Baruch, Noa E; Marth, Christian; Mądry, Radosław; Christensen, René D; Berek, Jonathan S; Dørum, Anne; Tinker, Anna V; du Bois, Andreas; González-Martín, Antonio; Follana, Philippe; Benigno, Benedict; Rosenberg, Per; Gilbert, Lucy; Rimel, Bobbie J; Buscema, Joseph; Balser, John P; Agarwal, Shefali; Matulonis, Ursula A

    2016-12-01

    Niraparib is an oral poly(adenosine diphosphate [ADP]-ribose) polymerase (PARP) 1/2 inhibitor that has shown clinical activity in patients with ovarian cancer. We sought to evaluate the efficacy of niraparib versus placebo as maintenance treatment for patients with platinum-sensitive, recurrent ovarian cancer. In this randomized, double-blind, phase 3 trial, patients were categorized according to the presence or absence of a germline BRCA mutation (gBRCA cohort and non-gBRCA cohort) and the type of non-gBRCA mutation and were randomly assigned in a 2:1 ratio to receive niraparib (300 mg) or placebo once daily. The primary end point was progression-free survival. Of 553 enrolled patients, 203 were in the gBRCA cohort (with 138 assigned to niraparib and 65 to placebo), and 350 patients were in the non-gBRCA cohort (with 234 assigned to niraparib and 116 to placebo). Patients in the niraparib group had a significantly longer median duration of progression-free survival than did those in the placebo group, including 21.0 vs. 5.5 months in the gBRCA cohort (hazard ratio, 0.27; 95% confidence interval [CI], 0.17 to 0.41), as compared with 12.9 months vs. 3.8 months in the non-gBRCA cohort for patients who had tumors with homologous recombination deficiency (HRD) (hazard ratio, 0.38; 95% CI, 0.24 to 0.59) and 9.3 months vs. 3.9 months in the overall non-gBRCA cohort (hazard ratio, 0.45; 95% CI, 0.34 to 0.61; P<0.001 for all three comparisons). The most common grade 3 or 4 adverse events that were reported in the niraparib group were thrombocytopenia (in 33.8%), anemia (in 25.3%), and neutropenia (in 19.6%), which were managed with dose modifications. Among patients with platinum-sensitive, recurrent ovarian cancer, the median duration of progression-free survival was significantly longer among those receiving niraparib than among those receiving placebo, regardless of the presence or absence of gBRCA mutations or HRD status, with moderate bone marrow toxicity. (Funded by

  7. Synthesis and characterization of potential iron–platinum drugs and supplements by laser liquid photolysis

    Directory of Open Access Journals (Sweden)

    Forbes A

    2012-06-01

    Full Text Available Steven S Nkosi,1,2 Bonex W Mwakikunga,4 Elias Sideras-Haddad,2 Andrew Forbes1,31CSIR National Laser Centre, Pretoria, South Africa; 2DST/NRF Centre for Excellence in Strong Materials and School of Physics, University of the Witwatersrand, Johannesburg, 3School of Physics, University of KwaZulu-Natal, Durban, South Africa; 4DST/CSIR National Centre for Nano-Structured Materials, Pretoria, South AfricaAbstract: Highly crystalline nanospherical iron–platinum systems were produced by 248 nm laser irradiation of a liquid precursor at different laser fluences, ranging from 100–375 mJ/cm2. The influence of laser intensity on particle size, iron composition, and structure was systematically investigated. Different nanostructures of iron–platinum alloy and chemically disordered iron–platinum L10 phase were obtained without annealing. The prepared precursor solution underwent deep photolysis to polycrystalline iron–platinum nanoalloys through Fe(III acetylacetonate and Pt(II acetylacetonate. Fe(II and Pt(I acetylacetone decomposed into Fe0 and Pt0 nanoparticles. We found that the (001 diffraction peak shifted linearly to a lower angle, with the last peak shifting in opposition to the others. This caused the face-centered cubic L10 structure to change its composition according to laser fluence. The nanostructures were shown to contain iron and platinum only by energy-dispersive spectroscopy at several spots. The response of these iron–platinum nanoparticles to infrared depends on their stoichiometric composition, which is controlled by laser fluence.Keywords: nanostructures, iron, platinum, nanoparticles, laser liquid photolysis, composition

  8. Combinations of platinums and selected phytochemicals as a means of overcoming resistance in ovarian cancer.

    Science.gov (United States)

    Huq, Fazlul; Yu, Jun Q; Beale, Philip; Chan, Charles; Arzuman, Lalia; Nessa, Meher U; Mazumder, Mohammed E H

    2014-01-01

    Cancer sufferers are often found to use herbal products along with targeted therapy although not much information (whether beneficial or harmful) is available about the effects of such combinations. In this study, we investigated synergism from the combination of platinum drugs and a number of tumour-active phytochemicals including curcumin, epigallocatechin-3-gallate, thymoquinone, genistein, resveratrol, betulinic acid and ursolic acid in three human ovarian cancer cell lines A2780, A2780(cisR) and A2780(ZD0473R), as a function of concentration and the sequence of administration. Both the dose-effect curves and combination indices show that the binary combinations of platinum drugs with the phytochemicals exert concentration- and sequence-dependent synergism in the cell lines. Generally the degree of synergism is found to be greater in sequenced administration such as 0/2 h, 2/0 h, 0/4 h and 4/0 h than the bolus. The variation in the nature of the combined drug action from being highly synergistic to antagonistic with the change in sequence of administration clearly indicates that the action of one drug modulates that of the other (towards the induction or inhibition of apoptosis). We have also used sequenced combinations of platinum drugs and bortezomib (a proteasome inhibitor that prevents cisplatin-induced proteasomal degration of copper transporter CTR1) to enhance cellular platinum accumulation and the level of platinum-DNA binding especially in the resistant human ovarian tumour models. Proteomic studies to identify the key proteins associated with platinum resistance are ongoing. We have identified 59 proteins associated with platinum resistance in ovarian tumor models.

  9. In vitro effects of platinum compounds on renal cellular respiration in mice.

    Science.gov (United States)

    Almarzooqi, Saeeda-S; Alfazari, Ali-S; Abdul-Kader, Hidaya-M; Saraswathiamma, Dhanya; Albawardi, Alia-S; Souid, Abdul-Kader

    2015-01-01

    Cisplatin, carboplatin and oxaliplatin are structurally-related compounds, which are commonly used in cancer therapy. Cisplatin (Platinol(®)) has Boxed Warning stating: "Cumulative renal toxicity associated with PLATINOL is severe", while carboplatin and oxaliplatin are less nephrotoxic. These drugs form platinum adducts with cellular DNA. Their bindings to cellular thiols (e.g., glutathione and metallothionein) are known to contribute to drug resistance while thiol depletion augments platinum toxicity. Using phosphorescence oxygen analyzer, this study investigated the effects of platinum drugs on renal cellular respiration (mitochondrial O2 consumption) in the presence and absence of the thiol blocking agent N-ethylmaleimide (used here as a model for thiol depletion). Renal cellular ATP was also determined. Kidney fragments from C57BL/6 mice were incubated at 37 °C in Krebs-Henseleit buffer (gassed with 95% O2:5% CO2) with and without 100 μM platinum drug in the presence and absence of 100 μM N-ethylmaleimide for ≤ 6 h. Platinum drugs alone had no effects on cellular respiration (P ≥ 0.143) or ATP (P ≥ 0.161). N-ethylmaleimide lowered cellular respiration (P ≤ 0.114) and ATP (P = 0.008). The combination of platinum drug and N-ethylmaleimide significantly lowered both cellular respiration (P ≤ 0.006) and ATP (P ≤ 0.003). Incubations with N-ethylmaleimide alone were associated with moderate-to-severe tubular necrosis. Incubations with cisplatin+N-ethylmaleimide vs. cisplatin alone produced similar severities of tubular necrosis. Tubular derangements were more prominent in carboplatin+N-ethylmaleimide vs. carboplatin alone and in oxaliplatin+N-ethylmaleimide vs. oxaliplatin alone. These results demonstrate the adverse events of thiol depletion on platinum-induced nephrotoxicities. The results suggest cellular bioenergetics is a useful surrogate biomarker for assessing drug-induced nephrotoxicities.

  10. [Simultaneous determination of platinum (IV) and palladium (II) using spectrophotometry method].

    Science.gov (United States)

    Ma, Dong-Lan; Wang, Yun; Ma, Kuang-Biao; Wang, Jin-Ye

    2009-10-01

    The N-(m-methylphenyl)-N'-(sodium p-aminobenzenesulfonate)-thiourea (MMPT) was good reagent of water solubility. In the medium of an HAc-NaAc buffer solution and hexadecyltrimethylammonium bromide (CTMAB), MMPT can react with platinum (IV) and palladium (II) to form green and brown soluble complex. The maximum absorbance of the complex was at lambdaPt(max) = 754.4 nm and lambdaPD(max) = 304.6 nm. Beer's law was obeyed with the concentration in the range of 0-32.0 microg Pt(IV)/25 mL and 0-25.0 microg Pd(II)/25 mL for platinum (IV) and palladium(II) respectively. The correlated coefficient was r754.4 = 0.999 5 for platinum (IV); and r304.6 = 0.999 9 for palladium (II). Their molar absorption coefficients were epsilonPT(754.4 = 8.6 x 10(4) L x mol(-1) x cm(-1) and epsilonPd(304.6) = 7.4 x 10(4) L x mol(-1) x cm(-1) respectively. The contents of platinum (IV) and palladium (II) were converted by determination of the absorbency of mix solution of platinum (IV) and palladium (II) at 754.4 and 304.6 nm. Only Cu2+ and Co2+ interfered with the determination of palladium (II) among 50 coexistent ions, so the selectivity was good. It can be used for the determination of content of synthesis samples. The relative standard deviation (RSD) was less than 2.0%, and the recovery (%) was in the range of 96%-104%. The results are satisfactory. Because the reagent reacts with platinum (IV) and palladium (II) to form water soluble complex and does not require pre-separation for simultaneous determination of platinum (IV) and palladium (II), the method is easy to operate, rapid and environment-friendly.

  11. Prophage induction and mutagenicity of a series of anti-tumour platinum(II) and platinum(IV) co-ordination complexes

    NARCIS (Netherlands)

    Mattern, I.E.; Cocchiarella, L.; Kralingen, C.G. van; Lohman, P.H.M.

    1982-01-01

    Eleven platinum compounds with nitrogen donor ligands, previously tested for anti-tumour activity were studied for induction of prophage lambda and for mutagenicity in the Ames assay, with various strains of Salmonella. The compounds included cis and trans isomers of Pt(II) and Pt(IV) complexes and

  12. Spin-Hall magnetoresistance in platinum on yttrium iron garnet : Dependence on platinum thickness and in-plane/out-of-plane magnetization

    NARCIS (Netherlands)

    Vlietstra, N.; Shan, J.; Castel, V.; van Wees, B. J.; Ben Youssef, J.

    2013-01-01

    The occurrence of spin-Hall magnetoresistance (SMR) in platinum (Pt) on top of yttrium iron garnet (YIG) has been investigated, for both in-plane and out-of-plane applied magnetic fields and for different Pt thicknesses [3, 4, 8, and 35 nm]. Our experiments show that the SMR signal directly depends

  13. Urinary excretion of platinum, arsenic and selenium of cancer patients from the Antofagasta region in Chile treated with platinum-based drugs

    Directory of Open Access Journals (Sweden)

    Román Domingo A

    2012-04-01

    Full Text Available Abstract Background Arsenic exposure increases the risk of non-cancerous and cancerous diseases. In the Antofagasta region in Chile, an established relationship exists between arsenic exposure and the risk of cancer of the bladder, lung and skin. Platinum-based drugs are first-line treatments, and many works recognise selenium as a cancer-fighting nutrient. We characterised the short-term urinary excretion amounts of arsenic, selenium and platinum in 24-h urine samples from patients with lung cancer and those with cancer other than lung treated with cisplatin or/and carboplatin. As - Se - Pt inter-element relationships were also investigated. Results The amounts of platinum excreted in urine were not significantly different between patients with lung cancer and those with other cancers treated with cisplatin, despite the significant variation in platinum amounts supplied from platinum-based drugs. In general, the analytical amounts of excreted selenium were greater than those for arsenic, which could imply that platinum favours the excretion of selenium. For other types of cancers treated with drugs without platinum, excretion of selenium was also greater than that of arsenic, suggesting an antagonist selenium-anti-cancer drug relationship. Conclusions Regards the baseline status of patients, the analytical amounts of excreted Se is greater than those for As, particularly, for cisplatin chemotherapy. This finding could imply that for over the As displacement Pt favours the excretion of Se. The analytical amounts of excreted Se were greater than those for As, either with and without Pt-containing drugs, suggesting an antagonist Se-anti-cancer drug relationship. However, it seemed that differences existed between As - Se - Pt inter-element associations in patients treated for lung cancer in comparison with those treated for cancer other than lung. Therefore, knowledge obtained in this work, can contribute to understanding the arsenic cancer

  14. 3D Printed Graphene Based Energy Storage Devices.

    Science.gov (United States)

    Foster, Christopher W; Down, Michael P; Zhang, Yan; Ji, Xiaobo; Rowley-Neale, Samuel J; Smith, Graham C; Kelly, Peter J; Banks, Craig E

    2017-03-03

    3D printing technology provides a unique platform for rapid prototyping of numerous applications due to its ability to produce low cost 3D printed platforms. Herein, a graphene-based polylactic acid filament (graphene/PLA) has been 3D printed to fabricate a range of 3D disc electrode (3DE) configurations using a conventional RepRap fused deposition moulding (FDM) 3D printer, which requires no further modification/ex-situ curing step. To provide proof-of-concept, these 3D printed electrode architectures are characterised both electrochemically and physicochemically and are advantageously applied as freestanding anodes within Li-ion batteries and as solid-state supercapacitors. These freestanding anodes neglect the requirement for a current collector, thus offering a simplistic and cheaper alternative to traditional Li-ion based setups. Additionally, the ability of these devices' to electrochemically produce hydrogen via the hydrogen evolution reaction (HER) as an alternative to currently utilised platinum based electrodes (with in electrolysers) is also performed. The 3DE demonstrates an unexpectedly high catalytic activity towards the HER (-0.46 V vs. SCE) upon the 1000th cycle, such potential is the closest observed to the desired value of platinum at (-0.25 V vs. SCE). We subsequently suggest that 3D printing of graphene-based conductive filaments allows for the simple fabrication of energy storage devices with bespoke and conceptual designs to be realised.

  15. Medical devices: US medical device regulation.

    Science.gov (United States)

    Jarow, Jonathan P; Baxley, John H

    2015-03-01

    Medical devices are regulated by the US Food and Drug Administration (FDA) within the Center for Devices and Radiological Health. Center for Devices and Radiological Health is responsible for protecting and promoting the public health by ensuring the safety, effectiveness, and quality of medical devices, ensuring the safety of radiation-emitting products, fostering innovation, and providing the public with accurate, science-based information about the products we oversee, throughout the total product life cycle. The FDA was granted the authority to regulate the manufacturing and marketing of medical devices in 1976. It does not regulate the practice of medicine. Devices are classified based on complexity and level of risk, and "pre-1976" devices were allowed to remain on the market after being classified without FDA review. Post-1976 devices of lower complexity and risk that are substantially equivalent to a marketed "predicate" device may be cleared through the 510(k) premarket notification process. Clinical data are typically not needed for 510(k) clearance. In contrast, higher-risk devices typically require premarket approval. Premarket approval applications must contain data demonstrating reasonable assurance of safety and efficacy, and this information typically includes clinical data. For novel devices that are not high risk, the de novo process allows FDA to simultaneously review and classify new devices. Devices that are not legally marketed are permitted to be used for clinical investigation purposes in the United States under the Investigational Device Exemptions regulation.

  16. Pyrometallurgical Recovery of Platinum Group Metals from Spent Catalysts

    Science.gov (United States)

    Peng, Zhiwei; Li, Zhizhong; Lin, Xiaolong; Tang, Huimin; Ye, Lei; Ma, Yutian; Rao, Mingjun; Zhang, Yuanbo; Li, Guanghui; Jiang, Tao

    2017-09-01

    As an important secondary resource with abundant platinum group metals (PGMs), spent catalysts demand recycling for both economic and environmental benefits. This article reviews the main pyrometallurgical processes for PGM recovery from spent catalysts. Existing processes, including smelting, vaporization, and sintering processes, are discussed based in part on a review of the physiochemical characteristics of PGMs in spent catalysts. The smelting technology, which produces a PGM-containing alloy, is significantly influenced by the addition of various collectors, such as lead, copper, iron, matte, or printed circuit board (PCB), considering their chemical affinities for PGMs. The vaporization process can recover PGMs in vapor form at low temperatures (250-700°C), but it suffers high corrosion and potential environmental and health risks as a result of involvement of the hazardous gases, mainly Cl2 and CO. The sintering process serves as a reforming means for recycling of the spent catalysts by in situ reduction of their oxidized PGMs components. Among these processes, the smelting process seems more promising although its overall performance can be further improved by seeking a suitable target-oriented collector and flux, together with proper pretreatment and process intensification using an external field.

  17. Gold and Platinum in Silicon - Isolated Impurities Complexes

    CERN Multimedia

    Mcglynn, P

    2002-01-01

    %IS357 :\\\\ \\\\ Gold and platinum impurities in silicon are exploited for the control of minority carrier lifetimes, and this important feature has resulted in sustained research interest over several decades. Although the properties of isolated substitutional Au~atoms are well understood, this is not the case for Pt. Considerable uncertainty exists regarding the nature of several Pt related defects observed in Electron Paramagnetic Resonance~(EPR) and Photo~Luminescence~(PL). One of the objectives of this experiment is to exploit the transformation of radioactive Au isotopes as a means of producing specific Pt centres, and to use our thorough knowledge of Au in silicon to guide in the interpretation of data obtained for the centres when they transform to Pt.\\\\ \\\\ In addition to isolated impurities, the experiment also addresses the question of pairs of atoms formed by Au and Pt. Studies of these impurity pairs have been reported, but the benefits of a direct comparison of the defects in both the Au and Pt form...

  18. Bioaccessibility of palladium and platinum in urban aerosol particulates

    Science.gov (United States)

    Puls, Christoph; Limbeck, Andreas; Hann, Stephan

    2012-08-01

    To evaluate potential health hazards caused by environmental Platinum Group Elements (PGEs), bioaccessibility of the metals in question needs to be assessed. To gain appropriate data, airborne particulate matter samples of different size fractions (total suspended particles as well as PM10 and PM2.5) were taken in downtown Vienna, an urban site primarily polluted by traffic. Total PGE concentrations in these samples were in the low picogram per cubic meter range, as determined by ID-ICP-MS after microwave digestion. For elimination of elements interfering with the accurate quantification, the digested samples were subjected to a cleaning procedure involving cation exchange. For determination of the bioaccessible fraction, it was assumed that inhaled particles are removed from the respiratory system by mucociliary clearance and subsequently ingested. Accordingly, the solubility of PGE in synthetic gastric juice was investigated by batch extraction of particulate matter samples followed by microwave assisted UV-digestion, cation exchange cleanup and ID-ICP-MS. The acquired data was used to calculate the bioaccessible fraction of Pd and Pt in airborne particulate matter. Average GIT-extractable fractions for Pd and Pt in TSP were 41% and 27%, in PM10 34% and 26%, respectively, thus exceeding previously determined values for bioaccessibility of PGE from ground catalyst materials by up to an order of magnitude.

  19. Single crystal studies of platinum alloys for oxygen reduction electrodes

    DEFF Research Database (Denmark)

    Ulrikkeholm, Elisabeth Therese

    In this thesis the discovery, characterization and testing of new catalysts for the oxygen reduction reaction (ORR) is investigated. Experiments on sputter cleaned, polycrystalline Pt5Y and Pt5Gd crystals have shown that these alloys are excelent candidates for catalysts for the ORR. To mimic...... was performed on the samples as prepared, and after electrochemical cycling between 0.05 V and 1.0 V VS. RHE. and between 0.05 V and 1.2 V VS. RHE. Diffraction experiments carried out after the cycling to 1.0 V showed that an overlayer with crystalline order had been formed on the Y/Pt(111) sample and the Gd....../Pt(111) samples. These overlayers were slightly compressed compared to pure platinum and had a 6-fold symmetry. After cycling to 1.2 V VS. RHE. the correlation length of the overlayer on the Gd/Pt(111) sample had decreased significantly, and the overlayer on the Y/Pt(111) had disappeared completely...

  20. Synthesis and characterization of phosphorescent platinum complexes containing phenylpyridazine

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Sang Jin; Kang, Seok; Lee, Seung Hee; Hwang, Kwang Jin; Park, Noh Kil; Kim, Young Sik

    2004-01-05

    Synthesis and characterization of a series of square planar Pt(II)-phenylpyridazine complexes are reported. The complexes have the general structure of (C-N)Pt(O-O), where HC-N is 3-phenyl-pyridazine (ppdz), 3-(3'-trifluoromethylphenyl)pyridazine (3'tfmppdz), 3-(3'-methoxyphenyl)-pyridazine (3'meoppdz), 3-(4'-methoxyphenyl)pyridazine (4'meoppdz), or 3-phenyl-6-chloro-pyridazine (6Clppdz) and HO-O is acetylacetone (Hacac). Reaction of K{sub 2}PtCl{sub 4} with a HC-N ligand forms the dimer, (C-N)Pt({mu}-Cl){sub 2}Pt(C-N), which is cleaved with Hacac to give the corresponding monomer, (C-N)Pt(O-O). The emission characteristics of these complexes are governed by the substituents of the cyclometalating ligands, showing emission {lambda}{sub max} values from 508 to 610 nm. Strong spin-orbit coupling of the platinum atom allows for the formally forbidden mixing of the {sup 1}MLCT with the {sup 3}MCLT and {sup 3}({pi}-{pi}*) states.

  1. Monodisperse Platinum and Rhodium Nanoparticles as Model Heterogeneous Catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Grass, Michael Edward [Univ. of California, Berkeley, CA (United States)

    2008-09-01

    Model heterogeneous catalysts have been synthesized and studied to better understand how the surface structure of noble metal nanoparticles affects catalytic performance. In this project, monodisperse rhodium and platinum nanoparticles of controlled size and shape have been synthesized by solution phase polyol reduction, stabilized by polyvinylpyrrolidone (PVP). Model catalysts have been developed using these nanoparticles by two methods: synthesis of mesoporous silica (SBA-15) in the presence of nanoparticles (nanoparticle encapsulation, NE) to form a composite of metal nanoparticles supported on SBA-15 and by deposition of the particles onto a silicon wafer using Langmuir-Blodgett (LB) monolayer deposition. The particle shapes were analyzed by transmission electron microscopy (TEM) and high resolution TEM (HRTEM) and the sizes were determined by TEM, X-ray diffraction (XRD), and in the case of NE samples, room temperature H2 and CO adsorption isotherms. Catalytic studies were carried out in homebuilt gas-phase reactors. For the nanoparticles supported on SBA-15, the catalysts are in powder form and were studied using the homebuilt systems as plug-flow reactors. In the case of nanoparticles deposited on silicon wafers, the same systems were operated as batch reactors. This dissertation has focused on the synthesis, characterization, and reaction studies of model noble metal heterogeneous catalysts. Careful control of particle size and shape has been accomplished though solution phase synthesis of Pt and Rh nanoparticles in order to elucidate further structure-reactivity relationships in noble metal catalysis.

  2. Electrochemical characterization of platinum nanoparticles stabilized by amines

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez-Meneses, E., E-mail: esthervincent@yahoo.co [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, CICATA-IPN Unidad Altamira, Km 14.5 Carretera Tampico-Puerto Industrial, C.P. 89600 Altamira, Tamaulipas (Mexico); Dominguez-Crespo, M.A. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, CICATA-IPN Unidad Altamira, Km 14.5 Carretera Tampico-Puerto Industrial, C.P. 89600 Altamira, Tamaulipas (Mexico); Montiel-Palma, V. [Centro de Investigaciones Quimicas, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, Colonia Chamilpa, C.P. 62201 Cuernavaca, Morelos (Mexico); Chavez-Herrera, V.H. [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada, CICATA-IPN Unidad Altamira, Km 14.5 Carretera Tampico-Puerto Industrial, C.P. 89600 Altamira, Tamaulipas (Mexico); Gomez, E. [Instituto de Quimica-Universidad Nacional Autonoma de Mexico, Ciudad Universitaria, C.P. 04510 Mexico, D.F. (Mexico); Hernandez-Tapia, G. [Gerencia de Catalizadores y Proceso, Instituto Mexicano del Petroleo, Eje Central Lazaro Cardenas norte 152, 07730 Mexico, D.F. (Mexico)

    2009-08-26

    In this work we present the synthesis by Chaudret approach of Pt nanoparticles stabilized by primary amine (-NH{sub 2}) compounds. Their electrochemical performance as cathodes in low temperature polymer electrolite fuel cells on the oxygen reduction reaction (ORR) is also presented. Transmission electron microscopy (TEM) images of the samples show Pt nanostructures with particle size varying from 10 to 100 nm depending on the kind of the stabilizer used during the catalyst preparation. In some cases well-dispersed isolated platinum nanoparticles were observed. The activity of the dispersed catalysts (Pt/C) with respect to the ORR was investigated using steady state polarization measurements. The kinetic parameters showed that although no significant differences between the Tafel slopes of the Pt catalysts exist, transfer coefficients and exchange current densities show higher activities when the Pt nanoparticles were stabilized by tert-butylamine (TBA). The performance with respect to the ORR of the Pt/C catalyst on vulcan carbon substrate is active and comparable to that reported in the literature for state-of-art electrocatalysts.

  3. Kinetics of Platinum-Catalyzed Decomposition of Hydrogen Peroxide

    Science.gov (United States)

    Vetter, Tiffany A.; Colombo, D. Philip, Jr.

    2003-07-01

    CIBA Vision Corporation markets a contact lens cleaning system that consists of an AOSEPT disinfectant solution and an AOSEPT lens cup. The disinfectant is a buffered 3.0% m/v hydrogen peroxide solution and the cup includes a platinum-coated AOSEPT disc. The hydrogen peroxide disinfects by killing bacteria, fungi, and viruses found on the contact lenses. Because the concentration of hydrogen peroxide needed to disinfect is irritating to eyes, the hydrogen peroxide needs to be neutralized, or decomposed, before the contact lenses can be used again. A general chemistry experiment is described where the kinetics of the catalyzed decomposition of the hydrogen peroxide are studied by measuring the amount of oxygen generated as a function of time. The order of the reaction with respect to the hydrogen peroxide, the rate constant, and the energy of activation are determined. The integrated rate law is used to determine the time required to decompose the hydrogen peroxide to a concentration that is safe for eyes.

  4. Characterization of Platinum Nanoparticles Deposited on Functionalized Graphene Sheets

    Directory of Open Access Journals (Sweden)

    Yu-Chun Chiang

    2015-09-01

    Full Text Available Due to its special electronic and ballistic transport properties, graphene has attracted much interest from researchers. In this study, platinum (Pt nanoparticles were deposited on oxidized graphene sheets (cG. The graphene sheets were applied to overcome the corrosion problems of carbon black at operating conditions of proton exchange membrane fuel cells. To enhance the interfacial interactions between the graphene sheets and the Pt nanoparticles, the oxygen-containing functional groups were introduced onto the surface of graphene sheets. The results showed the Pt nanoparticles were uniformly dispersed on the surface of graphene sheets with a mean Pt particle size of 2.08 nm. The Pt nanoparticles deposited on graphene sheets exhibited better crystallinity and higher oxygen resistance. The metal Pt was the predominant Pt chemical state on Pt/cG (60.4%. The results from the cyclic voltammetry analysis showed the value of the electrochemical surface area (ECSA was 88 m2/g (Pt/cG, much higher than that of Pt/C (46 m2/g. The long-term test illustrated the degradation in ECSA exhibited the order of Pt/C (33% > Pt/cG (7%. The values of the utilization efficiency were calculated to be 64% for Pt/cG and 32% for Pt/C.

  5. Modeling platinum group metal complexes in aqueous solution.

    Science.gov (United States)

    Lienke, A; Klatt, G; Robinson, D J; Koch, K R; Naidoo, K J

    2001-05-07

    We construct force fields suited for the study of three platinum group metals (PGM) as chloranions in aqueous solution from quantum chemical computations and report experimental data. Density functional theory (DFT) using the local density approximation (LDA), as well as extended basis sets that incorporate relativistic corrections for the transition metal atoms, has been used to obtain equilibrium geometries, harmonic vibrational frequencies, and atomic charges for the complexes. We found that DFT calculations of [PtCl(6)](2-).3H(2)O, [PdCl(4)](2-).2H(2)O, and [RhCl(6)](3-).3H(2)O water clusters compared well with molecular mechanics (MM) calculations using the specific force field developed here. The force field performed equally well in condensed phase simulations. A 500 ps molecular dynamics (MD) simulation of [PtCl(6)](2-) in water was used to study the structure of the solvation shell around the anion. The resulting data were compared to an experimental radial distribution function derived from X-ray diffraction experiments. We found the calculated pair correlation functions (PCF) for hexachloroplatinate to be in good agreement with experiment and were able to use the simulation results to identify and resolve two water-anion peaks in the experimental spectrum.

  6. Triplet Energy Transport in Platinum-Acetylide Light Harvesting Arrays.

    Science.gov (United States)

    Chen, Zhuo; Hsu, Hsien-Yi; Arca, Mert; Schanze, Kirk S

    2015-06-18

    Light harvesting and triplet energy transport is investigated in chromophore-functionalized polystyrene polymers featuring light harvesting and energy acceptor chromophores (traps) at varying loading. The series of precision polymers was constructed via reversible addition-fragmentation transfer polymerization and functionalized with platinum acetylide triplet chromophores by using an azide-alkyne "click" reaction. The polymers have narrow polydispersity and degree of polymerization ∼60. The chromophores have the general structure, trans-[-R-C6H4-C≡C-Pt(PBu3)2-C≡C-Ar], where R is the attachment point to the polystyrene backbone and Ar is either -C6H4-C≡C-Ph or -pyrenyl (PE2-Pt and Py-Pt, respectively, with triplet energies of 2.35 and 1.88 eV). The polychromophores contain mainly the high-energy PE2-Pt units (light absorber and energy donor), with randomly distributed Py-Pt units (3-20% loading, energy acceptor). Photophysical methods are used to study the dynamics and efficiency of energy transport from the PE2-Pt to Py-Pt units in the polychromophores. The energy transfer efficiency is >90% for copolymers that contain 5% of the Py-Pt acceptor units. Time-resolved phosphorescence measurements combined with Monte Carlo exciton dynamics simulations suggest that the mechanism of exciton transport is exchange energy transfer hopping between PE2-Pt units.

  7. Dynamics of Single Hydrogen Bubbles at a Platinum Microelectrode.

    Science.gov (United States)

    Yang, Xuegeng; Karnbach, Franziska; Uhlemann, Margitta; Odenbach, Stefan; Eckert, Kerstin

    2015-07-28

    Bubble dynamics, including the formation, growth, and detachment, of single H2 bubbles was studied at a platinum microelectrode during the electrolysis of 1 M H2SO4 electrolyte. The bubbles were visualized through a microscope by a high-speed camera. Electrochemical measurements were conducted in parallel to measure the transient current. The periodic current oscillations, resulting from the periodic formation and detachment of single bubbles, allow the bubble lifetime and size to be predicted from the transient current. A comparison of the bubble volume calculated from the current and from the recorded bubble image shows a gas evolution efficiency increasing continuously with the growth of the bubble until it reaches 100%. Two different substrates, glass and epoxy, were used to embed the Pt wire. While nearly no difference was found with respect to the growth law for the bubble radius, the contact angle differs strongly for the two types of cell. Data provided for the contact point evolution further complete the image of single hydrogen bubble growth. Finally, the velocity field driven by the detached bubble was measured by means of PIV, and the effects of the convection on the subsequent bubble were evaluated.

  8. Partitioning of Sulfur and Platinum at Core Formation Conditions.

    Science.gov (United States)

    Suer, T. A.; Siebert, J.; Fiquet, G.; Remusat, L.

    2015-12-01

    Measuring the partitioning behavior of highly siderophile elements (HSE) at high pressures and temperatures is important for understanding the mantle's elemental reservoir and the core mantle differentiation process. Low solubility of HSEs in silicate melts and the small size of samples obtained from diamond anvil cell (DAC) experiments have prevented the experimental study of the partitioning of these elements at realistic deep magma ocean conditions. In this study, we present results for metal-silicate partitioning experiments of sulfur and platinum conducted at pressures between 45 and 80 GPa and at temperatures from 3500 to 4200 K. With the nanoSIMS as our main tool for measuring trace element concentrations, we have developed a protocol for studying the partitioning behavior of these elements from samples that underwent equilibration at high pressure and temperatures in a Laser-Heated DAC. The nanoSIMS has the spatial resolution and the required sensitivity to measure the low concentration of some HSEs in the quenched silicate glass. The results of this study will help to refine current core-mantle differentiation models. Furthermore they add constraints to the contribution of the late veneer to the mantle's elemental abundances.

  9. Platinum group metal recovery and catalyst manufacturing process

    Energy Technology Data Exchange (ETDEWEB)

    Chung, H. S.; Kim, Y. S.; Yoo, J. H.; Lee, H. S.; Ahn, D. H.; Kim, K. R.; Lee, S. H.; Paek, S. W.; Kang, H. S.

    1998-03-01

    The fission product nuclides generated during the irradiation of reactor fuel include many useful elements, among them platinum group metal such as ruthenium, rhodium and palladium which are of great industrial importance, occur rarely in nature and are highly valuable. In this research, the authors reviewed various PGM recovery methods. Recovery of palladium from seven-component simulated waste solution was conducted by selective precipitation method. The recovery yield was more than 99.5% and the purity of the product was more than 99%. Wet-proof catalyst was prepared with the recovered palladium. The specific surface area of the catalyst support was more than 400 m{sup 2}/g. The content of palladium impregnated on the support was 10 wt.%. Hydrogen isotope exchange efficiency of 93 % to equilibrium with small amount of the catalyst was obtained. It was turned out possible to consider using such palladium or other very low active PGM materials in applications where its actively is unimportant as in nuclear industries. (author). 63 refs., 38 tabs., 36 figs.

  10. Platinum-Coated Nickel Nanowires as Oxygen-Reducing Electrocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Alia, Shaun M [National Renewable Energy Laboratory (NREL); Larsen, Brian A [National Renewable Energy Laboratory (NREL); Pylypenko, Svitlana [ORNL; Cullen, David A [ORNL; Diercks, David R [Colorado School of Mines, Golden; Neyerlin, Kenneth C [National Renewable Energy Laboratory (NREL); Kocha, Shyam S [National Renewable Energy Laboratory (NREL); Pivovar, Bryan [Los Alamos National Laboratory (LANL)

    2014-01-01

    Platinum (Pt)-coated nickel (Ni) nanowires (PtNiNWs) are synthesized by the partial spontaneous galvanic displacement of NiNWs, with a diameter of 150 250 nm and a length of 100 200 m. PtNiNWs are electrochemically characterized for oxygen reduction (ORR) in rotating disk electrode half-cells with an acidic electrolyte and compared to carbon-supported Pt (Pt/HSC) and a polycrystalline Pt electrode. Like other extended surface catalysts, the nanowire morphology yields significant gains in ORR specific activity compared to Pt/HSC. Unlike other extended surface approaches, the resultant materials have yielded exceptionally high surface areas, greater than 90 m2 gPt 1. These studies have found that reducing the level of Pt displacement increases Pt surface area and ORR mass activity. PtNiNWs produce a peak mass activity of 917 mA mgPt 1, 3.0 times greater than Pt/HSC and 2.1 times greater than the U.S. Department of Energy target for proton-exchange membrane fuel cell activity.

  11. Removal of urea in a wearable dialysis device: a reappraisal of electro-oxidation.

    Science.gov (United States)

    Wester, Maarten; Simonis, Frank; Lachkar, Nadia; Wodzig, Will K; Meuwissen, Frank J; Kooman, Jeroen P; Boer, Walther H; Joles, Jaap A; Gerritsen, Karin G

    2014-12-01

    A major challenge for a wearable dialysis device is removal of urea, as urea is difficult to adsorb while daily production is very high. Electro-oxidation (EO) seems attractive because electrodes are durable, small, and inexpensive. We studied the efficacy of urea oxidation, generation of chlorine by-products, and their removal by activated carbon (AC). EO units were designed. Three electrode materials (platinum, ruthenium oxide, and graphite) were compared in single pass experiments using urea in saline solution. Chlorine removal by AC in series with EO by graphite electrodes was tested. Finally, urea-spiked bovine blood was dialyzed and dialysate was recirculated in a dialysate circuit with AC in series with an EO unit containing graphite electrodes. Platinum electrodes degraded more urea (21 ± 2 mmol/h) than ruthenium oxide (13 ± 2 mmol/h) or graphite electrodes (13 ± 1 mmol/h). Chlorine generation was much lower with graphite (13 ± 4 mg/h) than with platinum (231 ± 22 mg/h) or ruthenium oxide electrodes (129 ± 12 mg/h). Platinum and ruthenium oxide electrodes released platinum (4.1 [3.9-8.1] umol/h) and ruthenium (83 [77-107] nmol/h), respectively. AC potently reduced dialysate chlorine levels to Urea was removed from blood by EO at constant rate (9.5 ± 1.0 mmol/h). EO by graphite electrodes combined with AC shows promising urea removal and chlorine release complying with Association for the Advancement of Medical Instrumentation standards, and may be worth further exploring for dialysate regeneration in a wearable system.

  12. Determination of platinum traces contamination by graphite furnace atomic absorption spectrometry after preconcentration by cloud point extraction

    Energy Technology Data Exchange (ETDEWEB)

    Chappuy, M. [Analytical Development Laboratory, Pharmaceutical Establishment of Paris Hospitals, 7 rue du Fer a Moulin, 75005 Paris (France); Caudron, E., E-mail: eric.caudron@eps.aphp.fr [Analytical Development Laboratory, Pharmaceutical Establishment of Paris Hospitals, 7 rue du Fer a Moulin, 75005 Paris (France); Groupe de Chimie Analytique de Paris-Sud, EA 4041, IFR 141, School of Pharmacy, Univ Paris-Sud, 92296 Chatenay-Malabry (France); Bellanger, A. [Department of Pharmacy, Pitie-Salpetriere Hospital (Paris Public Hospital Authority), 47 boulevard de l' hopital, 75013 Paris (France); Pradeau, D. [Analytical Development Laboratory, Pharmaceutical Establishment of Paris Hospitals, 7 rue du Fer a Moulin, 75005 Paris (France)

    2010-04-15

    A simple and sensitive method is described for the determination of platinum surface contamination originating from cisplatin, carboplatin and oxaliplatin. Following extraction from swabs and preconcentration with the cloud point extraction (CPE) method, detection was by graphite furnace atomic absorption spectrometry (GFAAS). After desorption of platinum compounds from the swab, CPE involved on preconcentration of platinum in aqueous solution with diethyldithiocarbamate (DDTC) as chelating agent and Triton X-114 as extraction medium. DDTC is not only a chelating agent, but may also be a good candidate for the inactivation of platinum compounds. DDTC is recommended by the Word Health Organization (WHO) for the destruction of platinum-based anticancer drugs. The main factors affecting CPE efficiency, pH of the sample solution, concentrations of DDTC and Triton X-114, equilibration temperature and incubation time, were evaluated in order to enhance sensitivity of the method. The desorption of platinum compounds from the swab was investigated in parallel. Since platinum is bound to DDTC, it must exchange with copper in order to enhance platinum atomizing by GFAAS. A preconcentration factor of 29 was obtained for 10 mL of a platinum solution at 10 {mu}g mL{sup -1}. In optimal conditions, the limit of detection was 0.2 ng mL{sup -1}, corresponding to 2.0 ng of platinum metal on the swab. Absorbance was linear between 0.7 and 15 ng mL{sup -1}. The proposed method was applied for the determination of surface contamination by platinum compounds with correct results.

  13. Synthesis, biological evaluation and SAR studies of novel bicyclic antitumor platinum(IV) complexes.

    Science.gov (United States)

    Lorenzo, Julia; Delgado, Aida; Montaña, Ángel M; Mesas, Juan M; Alegre, María-Teresa; Rodríguez, María del Carmen; Avilés, Francesc-Xavier

    2014-08-18

    The present study describes the synthesis, anticancer activity and SAR studies of novel platinum(IV) complexes having 1,2-bis(aminomethyl)carbobicyclic or oxabicyclic carrier ligands, bearing chlorido and/or hydroxido ligands in axial position and chlorido or malonato ligands in equatorial position (labile ligands). These complexes were synthetized with the aim of obtaining new anticancer principles more soluble in water and therefore more bioavailable. Several substitution patterns on the platinum atom have been designed in order to evaluate their antiproliferative activity and to establish structure-activity relationship rules. The synthesis of platinum(IV) complexes with axial hydroxyl ligands on the platinum(IV) were carried out by reaction of K2Pt(OH)2Cl4 with the corresponding diamines. The complexes with axial chlorido ligands on the platinum(IV) atom were synthesized by direct reaction of diamines with K2PtCl6. Carboxylated complexes were synthesized by the substitution reaction of equatorial chlorido ligands by silver dicarboxylates. The most actives complexes were those having malonate as a labile ligand, no matter of the structure of the carrier ligand. Regarding the influence of the structure of the non-labile 1,4-diamine carrier ligand on the cytotoxicity, it was found that the complexes having the more lipophilic and symmetrical bicyclo[2.2.2]octane framework were much more active than those having an oxygen or methylene bridge.

  14. Surface engineering of hierarchical platinum-cobalt nanowires for efficient electrocatalysis

    Science.gov (United States)

    Bu, Lingzheng; Guo, Shaojun; Zhang, Xu; Shen, Xuan; Su, Dong; Lu, Gang; Zhu, Xing; Yao, Jianlin; Guo, Jun; Huang, Xiaoqing

    2016-06-01

    Despite intense research in past decades, the lack of high-performance catalysts for fuel cell reactions remains a challenge in realizing fuel cell technologies for transportation applications. Here we report a facile strategy for synthesizing hierarchical platinum-cobalt nanowires with high-index, platinum-rich facets and ordered intermetallic structure. These structural features enable unprecedented performance for the oxygen reduction and alcohol oxidation reactions. The specific/mass activities of the platinum-cobalt nanowires for oxygen reduction reaction are 39.6/33.7 times higher than commercial Pt/C catalyst, respectively. Density functional theory simulations reveal that the active threefold hollow sites on the platinum-rich high-index facets provide an additional factor in enhancing oxygen reduction reaction activities. The nanowires are stable in the electrochemical conditions and also thermally stable. This work may represent a key step towards scalable production of high-performance platinum-based nanowires for applications in catalysis and energy conversion.

  15. Trastuzumab-mediated selective delivery for platinum drug to HER2-positive breast cancer cells.

    Science.gov (United States)

    Huang, Rong; Sun, Yu; Gao, Qihe; Wang, Qiucui; Sun, Baiwang

    2015-10-01

    Oxaliplatin is used widely as an anticancer drug for clinical treatment. However, its applications are limited because of its poor selectivity. In this work, we described the design, synthesis, and characterization of conjugates combining trastuzumab with a platinum (IV) analog of oxaliplatin, in which the trastuzumab acted as an active targeting agent for HER2-positive cancer cells. Indirect enzyme-linked immunosorbent assay and immunofluorescence study indicated the platinum (IV)-trastuzumab conjugates retained specific binding activity to HER2 overexpressed SK-BR-3 cells. In the presence of ascorbic acid, platinum (IV)-trastuzumab conjugates were reduced to platinum (II) analogs, which could bind to and unwind PUC19 DNA in a manner similar to oxaliplatin. The cytotoxic study was tested on three breast cell lines: SK-BR-3, MCF-7, and MDA-MB-231. Platinum (IV)-trastuzumab conjugates showed promising antiproliferative activity against SK-BR-3 cells, but significantly decreased the inhibition to MDA-MB-231 and MCF-7 cells. The flow cytometric analysis showed that the conjugates arrested the cell cycle mainly at the G2/M phase and killed the cells through an apoptotic pathway.

  16. Laser ablation of a platinum target in water. III. Laser-induced reactions

    Science.gov (United States)

    Nichols, William T.; Sasaki, Takeshi; Koshizaki, Naoto

    2006-12-01

    This is the third paper in our series studying the laser-target-liquid interactions occurring in laser ablation in liquids (LAL). Here, laser ablation of a platinum target in pure water at 355nm wavelength is studied as a function of laser energy. We describe three distinct reaction regimes between the ablated target species and water at different laser focusing conditions. At low laser fluence (removal is caused by laser heating of the platinum surface and the primary products are small clusters with a large percentage of platinum atoms in a nonzero oxidation state. At intermediate fluences (10-70J/cm2), platinum nanoparticles are the primary products. Our previous studies demonstrated that in this fluence regime ablation occurs through both thermal vaporization and explosive ejection of molten droplets. In both cases reactivity is small due to the low reactivity of platinum with water. At high fluences (>70J/cm2), we find large, faceted particles that are attributed to the drying of PtOx gels formed by reactive plasma etching of the target. Taken together these results demonstrate that significant tunability in the target-liquid interaction is possible during nanomaterial synthesis by LAL.

  17. Microstructural Study on Oxidation Resistance of Nonmodified and Platinum Modified Aluminide Coating

    Science.gov (United States)

    Zagula-Yavorska, Maryana; Sieniawski, Jan

    2014-03-01

    Platinum electroplating layers (3 and 7 μm thick) were deposited on the surface of the Inconel 713 LC, CMSX 4, and Inconel 625 Ni-base superalloys. Diffusion treatment at 1050°C for 2 h under argon atmosphere was performed after electroplating. Diffusion treated samples were aluminized according to the low activity CVD process at 1050°C for 8 h. The nonmodified aluminide coatings consist of NiAl phase. Platinum modification let to obtain the (Ni,Pt)Al phase in coatings. The coated samples were subjected to cyclic oxidation testing at 1100°C. It was discovered that increase of the platinum electroplating thickness from 3 to 7 μm provides the improvement of oxidation resistance of aluminide coatings. Increase of the platinum thickness causes decreases in weight change and decreases in parabolic constant during oxidation. The platinum provides the pure Al2O3 oxide formation, slow growth oxide layer, and delay the oxide spalling during heating-cooling thermal cycles.

  18. Design, Synthesis of Novel Platinum(II) Glycoconjugates, and Evaluation of Their Antitumor Effects.

    Science.gov (United States)

    Han, Jianbin; Gao, Xiangqian; Liu, Ran; Yang, Jinna; Zhang, Menghua; Mi, Yi; Shi, Ying; Gao, Qingzhi

    2016-06-01

    A new series of sugar-conjugated (trans-R, R-cyclohexane-1, 2-diamine)-2-halo-malonato-platinum(II) complexes were designed and synthesized to target tumor-specific glucose transporters (GLUTs). The water solubility of the sugar-conjugated platinum (II) complexes was greatly improved by average of 570-fold, 33-fold, and 94-fold, respectively, compared to cisplatin (1.0 mg/mL), carboplatin (17.1 mg/mL), and the newest generation of clinical drug oxaliplatin (6.0 mg/mL). Despite the high water solubility, the platinum(II) glycoconjugates exhibited a notable increase in cytotoxicity by a margin of 1.5- to 6.0-fold in six different human cancer cell lines with respect to oxaliplatin. The potential GLUT1 transportability of the complexes was investigated through a molecular docking study and was confirmed with GLUT1 inhibitor-mediated cytotoxicity dependency evaluation. The results showed that the sugar-conjugated platinum(II) complexes can be recognized by the glucose recognition binding site of GLUT1 and their cell killing effect depends highly on the GLUT1 inhibitor, quercetin. The research presenting a prospective concept for targeted therapy anticancer drug design, and with the analysis of the synthesis, water solubility, antitumor activity, and the transportability of the platinum(II) glycoconjugates, this study provides fundamental data supporting the inherent potential of these designed conjugates as lead compounds for GLUT-mediated tumor targeting.

  19. A Photoactivatable Platinum(IV) Anticancer Complex Conjugated to the RNA Ligand Guanidinoneomycin.

    Science.gov (United States)

    Shaili, Evyenia; Fernández-Giménez, Marta; Rodríguez-Astor, Savina; Gandioso, Albert; Sandín, Lluís; García-Vélez, Carlos; Massaguer, Anna; Clarkson, Guy J; Woods, Julie A; Sadler, Peter J; Marchán, Vicente

    2015-12-07

    A photoactivatable platinum(IV) complex, trans,trans,trans-[Pt(N3 )2 (OH)(succ)(py)2 ] (succ=succinylate, py=pyridine), has been conjugated to guanidinoneomycin to study the effect of this guanidinum-rich compound on the photoactivation, intracellular accumulation and phototoxicity of the pro-drug. Surprisingly, trifluoroacetic acid treatment causes the replacement of an azido ligand and the axial hydroxide ligand by trifluoroacetate, as shown by NMR spectroscopy, MS and X-ray crystallography. Photoactivation of the platinum-guanidinoneomycin conjugate in the presence of 5'-guanosine monophosphate (5'-GMP) led to the formation of trans-[Pt(N3 )(py)2 (5'-GMP)](+) , as does the parent platinum(IV) complex. Binding of the platinum(II) photoproduct {PtN3 (py)2 }(+) to guanine nucleobases in a short single-stranded oligonucleotide was also observed. Finally, cellular uptake studies showed that guanidinoneomycin conjugation improved the intracellular accumulation of the platinum(IV) pro-drug in two cancer cell lines, particularly in SK-MEL-28 cells. Notably, the higher phototoxicity of the conjugate in SK-MEL-28 cells than in DU-145 cells suggests a degree of selectivity towards the malignant melanoma cell line.

  20. Synthesis and Analysis of the Structure, Diffusion and Cytotoxicity of Heterocyclic Platinum(IV) Complexes.

    Science.gov (United States)

    Macias, Freddy J; Deo, Krishant M; Pages, Benjamin J; Wormell, Paul; Clegg, Jack K; Zhang, Yingjie; Li, Feng; Zheng, Gang; Sakoff, Jennette; Gilbert, Jayne; Aldrich-Wright, Janice R

    2015-11-16

    We have developed six dihydroxidoplatinum(IV) compounds with cytotoxic potential. Each derived from active platinum(II) species, these complexes consist of a heterocyclic ligand (HL) and ancillary ligand (AL) in the form [Pt(HL)(AL)(OH)2](2+), where HL is a methyl-functionalised variant of 1,10-phenanthroline and AL is the S,S or R,R isomer of 1,2-diaminocyclohexane. NMR characterisation and X-ray diffraction studies clearly confirmed the coordination geometry of the octahedral platinum(IV) complexes. The self-stacking of these complexes was determined using pulsed gradient stimulated echo nuclear magnetic resonance. The self-association behaviour of square planar platinum(II) complexes is largely dependent on concentration, whereas platinum(IV) complexes do not aggregate under the same conditions, possibly due to the presence of axial ligands. The cytotoxicity of the most active complex, exhibited in several cell lines, has been retained in the platinum(IV) form.

  1. Combined chemotherapy including platinum derivatives for medulloblastoma. The usefulness as maintenance chemotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Sasaki, Hikaru; Otani, Mitsuhiro; Yoshida, Kazunari; Kagami, Hiroshi; Shimazaki, Kenji; Toya, Shigeo; Kawase, Takeshi [Keio Univ., Tokyo (Japan). School of Medicine

    1997-02-01

    The authors reviewed 24 cerebellar medulloblastoma patients treated at Keio University to determine usefulness of combined chemotherapy including platinum derivatives (cisplatin, carboplatin) as the induction and maintenance treatment. All patients underwent radical surgery and craniospinal irradiation. Ten received adjuvant chemotherapy other than platinum derivatives (mainly with nitrosourea compounds), five were treated by induction and maintenance chemotherapy including platinum derivatives, and nine patients did not undergo chemotherapy. The progression-free survival rate of patients treated with platinum derivatives was better than that of patients treated with other modes of chemotherapy and also that of patients who did not receive chemotherapy. The results were especially good in the case of four patients treated with maintenance chemotherapy consisting of carboplatin and etoposide, two of whom had been free from relapse beyond the risk period of Collins. The occurrences of toxicity in maintenance chemotherapy with carboplatin and etoposide were limited to transient leucopenia. The present study indicates combined chemotherapy including platinum derivatives benefits patients with medulloblastoma, and could be useful, especially as maintenance treatment. (author)

  2. Reactivity of monofunctional cis-platinum adducts as a function of DNA sequence.

    Science.gov (United States)

    Malinge, J M; Leng, M

    1988-08-11

    The purpose of this work was to study the chemical reactivity of monofunctional cis-platinum-nucleic acid adducts as a function of nucleic acid sequence. The first part of the paper deals with the formation of these adducts. It is shown that the ternary nucleic acid-cis-platinum-ethidium bromide complexes in which ethidium bromide and nucleotide residues are cross-linked by cis-platinum, are relatively unstable at 37 degrees C. In the presence of acridine, ethidium bromide (but not cis-platinum) is slowly released which leads to the formation of monofunctional cis-platinum-nucleic acid adducts. After removal of acridine, the monofunctional adducts react further to become bifunctional. The second part of the paper deals with the kinetics of disappearance of the monofunctional adducts in several polynucleotides but not in poly(dG).poly(dC). When the adducts possess a chloride ligand, the limiting step in the cross-linking is the rate of aquation reaction of the chloride ligand. The rate constants are an order of magnitude larger when the monofunctional adducts do not possess a chloride ligand. In both the cases, the rate constants are apparently independent of the nucleic acid sequence.

  3. Device Fabrication and Probing of Discrete Carbon Nanostructures

    KAUST Repository

    Batra, Nitin M

    2015-05-06

    Device fabrication on multi walled carbon nanotubes (MWCNTs) using electrical beam lithography (EBL), electron beam induced deposition (EBID), ion beam induced deposition (IBID) methods was carried out, followed by device electrical characterization using a conventional probe station. A four-probe configuration was utilized to measure accurately the electrical resistivity of MWCNTs with similar results obtained from devices fabricated by different methods. In order to reduce the contact resistance of the beam deposited platinum electrodes, single step vacuum thermal annealing was performed. Microscopy and spectroscopy were carried out on the beam deposited electrodes to follow the structural and chemical changes occurring during the vacuum thermal annealing. For the first time, a core-shell type structure was identified on EBID Pt and IBID Pt annealed electrodes and analogous free standing nanorods previously exposed to high temperature. We believe this observation has important implications for transport properties studies of carbon materials. Apart from that, contamination of carbon nanostructure, originating from the device fabrication methods, was also studied. Finally, based on the observations of faster processing time together with higher yield and flexibility for device preparation, we investigated EBID to fabricate devices for other discrete carbon nanostructures.

  4. Coordination Chemistry in Water of a Free and a Lipase-Embedded Cationic NCN-Pincer Platinum Center with Neutral and Ionic Triarylphosphines

    NARCIS (Netherlands)

    Wieczorek, B.; Snelders, D.J.M.; Dijkstra, H.P.; Versluis, C.; Lutz, M.; Spek, A.L.; Egmond, M.R.; Klein Gebbink, R.J.M.; van Koten, G.

    2012-01-01

    The coordination chemistry in aqueous media was studied for the platinum center of low-molecular-weight cationic NCN-pincer platinum complexes [RC6H2(CH2NMe2)2-3,5-Pt(H2O)-4]+ (R = −(CH2)3P(═O)(OEt)(OC6H4NO2-4) (1(OH2)), H (2(OH2))) as well as of the platinum center of the NCN-pincer platinum cation

  5. Coordination Chemistry in Water of a Free and a Lipase-Embedded Cationic NCN-Pincer Platinum Center with Neutral and Ionic Triarylphosphines

    NARCIS (Netherlands)

    Wieczorek, B.; Snelders, D.J.M.; Dijkstra, H.P.; Versluis, C.; Lutz, M.; Spek, A.L.; Egmond, M.R.; Klein Gebbink, R.J.M.; van Koten, G.

    2012-01-01

    The coordination chemistry in aqueous media was studied for the platinum center of low-molecular-weight cationic NCN-pincer platinum complexes [RC6H2(CH2NMe2)2-3,5-Pt(H2O)-4]+ (R = −(CH2)3P(═O)(OEt)(OC6H4NO2-4) (1(OH2)), H (2(OH2))) as well as of the platinum center of the NCN-pincer platinum cation

  6. Determination of platinum surface contamination in veterinary and human oncology centres using inductively coupled plasma mass spectrometry

    NARCIS (Netherlands)

    Janssens, T.; Brouwers, E. E M; de Vos, J. P.; de Vries, N.; Schellens, J. H M; Beijnen, J. H.

    2015-01-01

    The objective of this study was to determine the surface contamination with platinum-containing antineoplastic drugs in veterinary and human oncology centres. Inductively coupled plasma mass spectrometry was used to measure platinum levels in surface samples. In veterinary and human oncology

  7. The role of interleukin-8 (IL-8) and IL-8 receptors in platinum response in high grade serous ovarian carcinoma.

    Science.gov (United States)

    Stronach, Euan A; Cunnea, Paula; Turner, Christina; Guney, Tankut; Aiyappa, Radhika; Jeyapalan, Senthuran; de Sousa, Camila H; Browne, Alacoque; Magdy, Nesreen; Studd, James B; Sriraksa, Ruethairat; Gabra, Hani; El-Bahrawy, Mona

    2015-10-13

    Platinum based drugs are the cornerstone of chemotherapy for ovarian cancer, however the development of chemoresistance hinders its success. IL-8 is involved in regulating several pro-survival pathways in cancer. We studied the expression of IL-8 and IL-8 receptors in platinum sensitive and resistant cell lines. Using qRT-PCR and immunohistochemistry, both platinum sensitive (PEA1, PEO14) and resistant (PEA2, PEO23) show increased expression of IL-8 and IL-8 receptors. IL-8RA shows nuclear and cytoplasmic expression, whilst IL-8RB is present solely in the cytoplasm. Knockdown of IL-8 increased sensitivity to cisplatin in platinum sensitive and reversed platinum resistance in resistant cell lines, decreased the expression of anti-apoptotic Bcl-2 and decreased inhibitory phosphorylation of pro-apoptotic Bad. IL-8 receptor antagonist treatment also enhanced platinum sensitivity. Nuclear localisation of IL-8RA was only detected in platinum resistant tumours. Inhibition of IL-8 signalling can enhance response in platinum sensitive and resistant disease. Nuclear IL-8RA may have potential as a biomarker of resistant disease.

  8. 78 FR 60270 - Platinum Energy, LLC; Supplemental Notice That Initial Market-Based Rate Filing Includes Request...

    Science.gov (United States)

    2013-10-01

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Platinum Energy, LLC; Supplemental Notice That Initial Market- Based Rate...-referenced proceeding, of Platinum Energy, LLC's application for market-based rate authority, with...

  9. The platinum group metals in Younger Dryas Horizons are terrestrial

    Science.gov (United States)

    Wu, Y.; Wikes, E.; Kennett, J.; West, A.; Sharma, M.

    2009-12-01

    The Younger Dryas (YD) event, which began 12,900 years ago, was a period of abrupt and rapid cooling in the Northern Hemisphere whose primary cause remains unclear. The prevalent postulated mechanism is a temporary shutdown of the thermohaline circulation following the breakup of an ice dam in North America. Firestone et al. (2007) proposed that the cooling was triggered by multiple cometary airbursts and/or impacts that engendered enormous environmental changes and disrupted the thermohaline circulation. The evidence in support for this hypothesis is a black layer in North America and in Europe marking the YD boundary containing charcoal, soot, carbon spherules and glass-like carbon suggesting extensive and intense forest fires. This layer is also enriched in magnetic grains high in iridium, magnetic microspherules, fullerenes containing extraterrestrial He-3, and nanodiamonds. Whereas the nanodiamonds could be produced in an impact or arrive with the impactor, the cometary burst/impact hypothesis remains highly controversial as the YD horizon lacks important impact markers such as craters, breccias, tektites and shocked minerals. Firestone et al. (2007) contend that bulk of Ir found at the YD boundary is associated with magnetic grains. The key issue is whether this Ir is meteorite derived. We used Ir and Os concentrations and Os isotopes to investigate the provenance of the platinum group metals in the YD horizon. The bulk sediment samples from a number of North American YD sites (Blackwater Draw, Murray Springs, Gainey, Sheriden Cave, and Myrtle Beach) and a site in Europe (Lommel) do not show any traces of meteorite derived Os and Ir. The [Os] = 2 to 45 pg/g in these sediments and the 187Os/188Os ratios are similar to the upper continental crustal values (~1.3), much higher than those in meteorites (0.13). Higher [Os] is observed in Blackwater Draw (= 194 pg/g). However, the Os/Ir ratio in Blackwater Draw is 5 (not 1 as expected for a meteorite) and 187Os/188

  10. Effects triggered by platinum nanoparticles on primary keratinocytes

    Directory of Open Access Journals (Sweden)

    Konieczny P

    2013-10-01

    Full Text Available Piotr Konieczny,1,* Anna Grazyna Goralczyk,1,* Radoslaw Szmyd,1,* Lukasz Skalniak,1,* Joanna Koziel,2 Francesca Larese Filon,3 Matteo Crosera,4 Agnieszka Cierniak,1 Ewa K Zuba-Surma,5 Julia Borowczyk,5 Eliza Laczna,5 Justyna Drukala,5 Elzbieta Pyza,6 Danuta Semik,6 Olga Woznicka,6 Andrzej Klein,1 Jolanta Jura11Department of General Biochemistry, 2Department of Microbiology, Jagiellonian University, Kraków, Poland; 3Department of Public Health Sciences, 4Department of Chemical and Pharmaceutical Sciences, University of Trieste, Trieste, Italy; 5Department of Cell Biology, 6Department of Cell Biology and Imaging, Jagiellonian University, Kraków, Poland*These authors equally contributed to this workAbstract: The platinum (Pt-group elements (PGEs represent a new kind of environmental pollutant and a new hazard for human health. Since their introduction as vehicle-exhaust catalysts, their emissions into the environment have grown considerably compared with their low natural concentration in the earth crust. PGE emissions from vehicle catalysts can be also in the form of nanometer-sized particles (Pt nanoparticles [PtNPs]. These elements, both in their metallic form or as ions solubilized in biological media, are now recognized as potent allergens and sensitizers. Human skin is always exposed to toxic particles; therefore, in the present study we addressed the question of whether polyvinylpyrrolidone-coated PtNPs may have any negative effects on skin cells, including predominantly epidermal keratinocytes. In this study, PtNPs of two sizes were used: 5.8 nm and 57 nm, in concentrations of 6.25, 12.5, and 25 µg/mL. Both types of NPs were protected with polyvinylpyrrolidone. Primary keratinocytes were treated for 24 and 48 hours, then cytotoxicity, genotoxicity, morphology, metabolic activity, and changes in the activation of signaling pathways were investigated in PtNP-treated cells. We found that PtNPs trigger toxic effects on primary keratinocytes

  11. Precise tuning in platinum-nickel/nickel sulfide interface nanowires for synergistic hydrogen evolution catalysis

    Science.gov (United States)

    Wang, Pengtang; Zhang, Xu; Zhang, Jin; Wan, Sheng; Guo, Shaojun; Lu, Gang; Yao, Jianlin; Huang, Xiaoqing

    2017-01-01

    Comprising abundant interfaces, multicomponent heterostructures can integrate distinct building blocks into single entities and yield exceptional functionalities enabled by the synergistic components. Here we report an efficient approach to construct one-dimensional metal/sulfide heterostructures by directly sulfuring highly composition-segregated platinum-nickel nanowires. The heterostructures possess a high density of interfaces between platinum-nickel and nickel sulfide components, which cooperate synergistically towards alkaline hydrogen evolution reaction. The platinum-nickel/nickel sulfide heterostructures can deliver a current density of 37.2 mA cm−2 at an overpotential of 70 mV, which is 9.7 times higher than that of commercial Pt/C. The heterostructures also offer enhanced stability revealed by long-term chronopotentiometry measurements. The present work highlights a potentially powerful interface-engineering strategy for designing multicomponent heterostructures with advanced performance in hydrogen evolution reaction and beyond. PMID:28239145

  12. Platinum-based chemotherapy: gastrointestinal immunomodulation and enteric nervous system toxicity.

    Science.gov (United States)

    Stojanovska, Vanesa; Sakkal, Samy; Nurgali, Kulmira

    2015-02-15

    The efficacy of chemotherapeutic treatment of colorectal cancer is challenged by severe gastrointestinal side effects, which include nausea, vomiting, constipation, and diarrhea. These symptoms can persist long after the treatment has been ceased. An emerging concept is the ability of platinum-based drugs to stimulate immunity, which is in contrast to conventional chemotherapeutic agents that are immunosuppressive. Here, we review the immunomodulatory aspects of platinum-based anticancer chemotherapeutics and their impact on gastrointestinal innervation. Given the bidirectional communication between the enteric nervous system and gastrointestinal immune system; exploring the consequences of platinum-induced immunogenicity will facilitate better understanding of gut dysfunction caused by chemotherapeutic agents. We propose that the development of future successful chemotherapeutics should rely on targeting the mechanisms underlying long-term gastrointestinal side effects.

  13. An ERK-dependent pathway to Noxa expression regulates apoptosis by platinum-based chemotherapeutic drugs.

    Science.gov (United States)

    Sheridan, C; Brumatti, G; Elgendy, M; Brunet, M; Martin, S J

    2010-12-09

    Cisplatin is a widely used cancer chemotherapeutic that promotes DNA damage-associated apoptosis. Although platinum compounds are known to form DNA adducts and provoke DNA damage, the molecular mechanism of cisplatin-induced cell death remains unclear. In this article, we show that the BH3-only protein Noxa is strongly transcriptionally upregulated in response to cisplatin and related platinum compounds. Cisplatin-induced Noxa expression was ERK dependent, but p53 independent, and inhibition of ERK activation markedly attenuated cisplatin-induced cell death, as well as Noxa expression. Furthermore, siRNA-mediated ablation of Noxa expression also inhibited cisplatin-induced cell death and permitted clonogenic survival. These observations reveal a novel ERK-regulated route to Noxa expression that is important for the cell killing activity of platinum-based chemotherapeutic drugs.

  14. Anodic stripping tin titration: a method for the voltammetric determination of platinum at trace levels.

    Science.gov (United States)

    Giussani, Barbara; Roncoroni, Simone; Nemenyi, Anna; Dal Santo, Vladimiro; Monticelli, Damiano; Recchia, Sandro

    2014-07-01

    We propose here a novel voltammetric method for the determination of platinum at trace levels. The method is based on the interference that platinum generates on the anodic stripping signal of tin acidic solutions: in appropriate conditions platinum uses the intermediate formation of tin(II) ions, taking place during the tin cathodic reduction, to reduce itself and to form mixed Pt(II)-Sn(II) chloro-complexes. From the analysis of the anodic stripping plots obtained after subsequent additions of tin in a Pt-containing solution, it is possible to quantify accurately and precisely the Pt concentration from 3 ppb to more than 10 ppm. This novel method is validated for the analysis of Pt in heterogeneous catalysts, but in principle could be extended to other matrixes.

  15. Exploring the Hydrolytic Behavior of the Platinum(IV) Complexes with Axial Acetato Ligands.

    Science.gov (United States)

    Zhao, Jian; Xu, Zichen; Lin, Jing; Gou, Shaohua

    2017-08-21

    Platinum(IV) complexes are generally thought to be kinetically inert, and are expected to be stable enough to resist premature aquation before entering the cancer cells. Nevertheless, in this work, complex 2 with axial acetato ligands can hydrolyze relatively quickly under biologically relevant conditions with a half-life of 91.7 min, resulting in the loss of the equatorial chlorido ligand. Further study indicated that the fast hydrolysis of complex 2 may be attributed to the strong σ-donor ability of N-isopropyl-1R,2R-diaminocyclohexane, and an increasing σ-donor ability of the amine group can promote the hydrolysis rate of the corresponding platinum(IV) complex. The experiment results were proven by the corresponding DFT calculation. Our study can help to re-evaluate the aqueous properties of the platinum(IV) complexes with axial acetate, which may be less inert to hydrolysis than expected under biologically relevant conditions.

  16. Sputtered platinum-iridium layers as electrode material for functional electrostimulation

    Energy Technology Data Exchange (ETDEWEB)

    Ganske, G., E-mail: ganske@iwe1.rwth-aachen.d [Institute of Materials in Electrical Engineering I, RWTH Aachen University, Sommerfeldstr. 24, D-52074 Aachen (Germany); Slavcheva, E. [Institute of Materials in Electrical Engineering I, RWTH Aachen University, Sommerfeldstr. 24, D-52074 Aachen (Germany); Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Sciences, 1113 Sofia (Bulgaria); Ooyen, A. van; Mokwa, W.; Schnakenberg, U. [Institute of Materials in Electrical Engineering I, RWTH Aachen University, Sommerfeldstr. 24, D-52074 Aachen (Germany)

    2011-03-31

    In this study co-sputtered layers of platinum-iridium (PtIr) are investigated as stimulation electrode material. The effects of different sputter parameters on the morphology and the electrochemical behavior are examined. It is shown that films sputtered at the lowest incident energy possess the highest charge storage capacity (CSC). At a Pt:Ir atomic-ratio of 55:45 the obtained CSC of 22 mC/cm{sup 2} is enhanced compared to the standard stimulation material platinum (16 mC/cm{sup 2}) but inferior to iridium which has a CSC of 35 mC/cm{sup 2}. Long term cyclic voltammetry measurements show that PtIr can be activated which increases the CSC to 29 mC/cm{sup 2}. Also a change in the film morphology is observed. Sputtered platinum-iridium films promise to combine high mechanical strength and increased charge storage capacity.

  17. Active targeting of cancer cells using folic acid-conjugated platinum nanoparticles

    Science.gov (United States)

    Teow, Yiwei; Valiyaveettil, Suresh

    2010-12-01

    Interaction of nanoparticles with human cells is an interesting topic for understanding toxicity and developing potential drug candidates. Water soluble platinum nanoparticles were synthesized viareduction of hexachloroplatinic acid using sodium borohydride in the presence of capping agents. The bioactivity of folic acid and poly(vinyl pyrrolidone) capped platinum nanoparticles (Pt-nps) has been investigated using commercially available cell lines. In the cell viability experiments, PVP-capped nanoparticles were found to be less toxic (>80% viability), whereas, folic acid-capped platinum nanoparticles showed a reduced viability down to 24% after 72 h of exposure at a concentration of 100 μg ml-1 for MCF7 breast cancer cells. Such toxicity, combined with the possibility to incorporate functional organic molecules as capping agents, can be used for developing new drug candidates.

  18. Thermally stable single-atom platinum-on-ceria catalysts via atom trapping

    Energy Technology Data Exchange (ETDEWEB)

    Jones, John; Xiong, Haifeng; DelaRiva, Andrew; Peterson, Eric J.; Pham, Hien; Challa, Sivakumar R.; Qi, Gongshin; Oh, Se H.; Wiebenga, Michelle H.; Pereira Hernandez, Xavier I.; Wang, Yong; Datye, Abhaya K.

    2016-07-08

    Catalysts based on single atoms of scarce precious metals can lead to more efficient use through enhanced reactivity and selectivity. However, single atoms on catalyst supports can be mobile and aggregate into nanoparticles when heated at elevated temperatures. High temperatures are detrimental to catalyst performance unless these mobile atoms can be trapped. We used ceria powders having similar surface areas but different exposed surface facets. When mixed with a platinum/ aluminum oxide catalyst and aged in air at 800°C, the platinum transferred to the ceria and was trapped. Polyhedral ceria and nanorods were more effective than ceria cubes at anchoring the platinum. Performing synthesis at high temperatures ensures that only the most stable binding sites are occupied, yielding a sinter-resistant, atomically dispersed catalyst.

  19. Recent advances in solid polymer electrolyte fuel cell technology with low platinum loading electrodes

    Science.gov (United States)

    Srinivasan, Supramaniam; Manko, David J.; Koch, Hermann; Enayetullah, Mohammad A.; Appleby, A. John

    1989-01-01

    Of all the fuel cell systems only alkaline and solid polymer electrolyte fuel cells are capable of achieving high power densities (greater than 1 W/sq cm) required for terrestrial and extraterrestrial applications. Electrode kinetic criteria for attaining such high power densities are discussed. Attainment of high power densities in solid polymer electrolyte fuel cells has been demonstrated earlier by different groups using high platinum loading electrodes (4 mg/sq cm). Recent works at Los Alamos National Laboratory and at Texas A and M University (TAMU) demonstrated similar performance for solid polymer electrolyte fuel cells with ten times lower platinum loading (0.45 mg/sq cm) in the electrodes. Some of the results obtained are discussed in terms of the effects of type and thickness of membrane and of the methods platinum localization in the electrodes on the performance of a single cell.

  20. Extraction and separation studies of platinum(IV) with N-n-octylaniline.

    Science.gov (United States)

    Lokhande, T N; Anuse, M A; Chavan, M B

    1998-11-01

    N-n-octylaniline in xylene is used for the extractive separation of platinum(IV) from acidic media. Platinum(IV) was extracted quantitatively with 10 ml of 3% reagent in xylene from 0.5 to 10 and 2.5 to 10 M hydrochloric and sulphuric acid, respectively. It was stripped from organic phase with water and estimated photometrically with stannous chloride. The effect of metal ion, acids, reagent concentration and of various foreign ions has been investigated. The method affords binary separation of platinum(IV) from iron(III), cobalt(II), nickel(II) and copper(II), and is applicable to the analysis of synthetic mixtures and alloys. The method is fast, accurate and precise.