WorldWideScience

Sample records for platforms satellite structures

  1. DFH-3 Satellite Platform

    Institute of Scientific and Technical Information of China (English)

    RenShufang

    2005-01-01

    The DFH-3 satellite platform is designed and developed by China Academy of Space Technology (CAST). It is a medium capability communications satellite platform. The platform adopts threeaxis attitude stabilization control system, having solar array output power of 1.7kW by the end of its design lifetime of 8 years. Its mass is 2100kg with payload capacity of 220kg.

  2. PRIMA: A new, competitive small satellite platform

    Science.gov (United States)

    Galeazzi, Claudio

    2000-03-01

    ASI, the Italian Space Agency, is going to finance a developing of a small satellite platforms production line called PRIMA (Piattaforma Riconfigurabile Italiana Multi-Applicativa) with Alenia Aerospazio partnership as Prime Contractor and sub-contractors preferably chosen within the Italian Space Industries. The main objective of the program is to develop a multi-mission, easily adaptable Platform for LEO orbits, allowing rapid, efficient and low cost bus for applicative and scientific missions. The Italian national space plan foresees for the enf of 2001 the build up of the Skymed/Cosmo constellation as applicative Earth observation program plus a number of small scientific spacecraft with a rate of 2 missions each three years. To fulfil these schedules, the PRIMA platform should complete its development and qualification program in order to be ready for the first unit (protoqualification flight) to interface the first payload (Science or Applicative). The intrinsic modularity of PRIMA should allow it to adapt itself to a large variety of missions in LEO orbits with minor modifications. The design will be conducted in order to get an advanced Platform able to meet a large set of missions, payloads and launcher specifications. The platform will be completed by a ground control centre adapted to the monitoring of PRIMA based satellites. PRIMA thus offers a very attractive alternative to large-scale missions in terms of costs and completion time. The paper will describe the technical aspects of PRIMA Platform, with particular emphasis put onto its flexibility and reconfigurability for different missions. The System and S/S architectures will also be presented and defined in view of selected mission cases. The AIV/AIT aspects will be discussed, with a discussion of the applicability of Globalstar™ approaches, facility and heritage. Finally, a brief overview of PRIMA first applications /SkyMed/COSMO and David) will be given.

  3. Introducing you to satellite operated data collection platforms (DCP).

    CSIR Research Space (South Africa)

    Stavropoulos, CC

    1977-09-01

    Full Text Available using this form of repeater. However, satellites able to handle reports from data collection platform (DCP's) have hitherto only been experimental. Within the next two years the operational phase for this type of activity will have been reached...

  4. An Orbiting Standards Platform for communication satellite system RF measurements

    Science.gov (United States)

    Wallace, R. G.; Woodruff, J. J.

    1978-01-01

    The Orbiting Standards Platform (OSP) is a proposed satellite dedicated to performing RF measurements on space communications systems. It would consist of a quasi-geostationary spacecraft containing an ensemble of calibrated RF sources and field strength meters operating in several microwave bands, and would be capable of accurately and conveniently measuring critical earth station and satellite RF performance parameters, such as EIRP, gain, figure of merit (G/T), crosspolarization, beamwidth, and sidelobe levels. The feasibility and utility of the OSP concept has been under joint study by NASA, NBS, Comsat and NTIA. A survey of potential OSP users was conducted by NTIA as part of this effort. The response to this survey, along with certain trends in satellite communications system design, indicates a growing need for such a measurement service.

  5. Drag-free Small Satellite Platforms for Future Geodesy Missions

    Science.gov (United States)

    Conklin, J. W.; Hong, S.; Nguyen, A.; Serra, P.; Balakrishnan, K.; Buchman, S.; De Bra, D. B.; Hultgren, E.; Zoellner, A.

    2013-12-01

    Continuous satellite geodesy measurements lasting into the foreseeable future are critical for the understanding of our changing planet. It is therefore imperative that we explore ways to reduce costs, while maintaining science return. Small satellite platforms represent a promising path forward if ways can be found to reduce the size, weight, and power of the necessary instrumentation. One key enabling technology is a precision small-scale drag-free system under development at the University of Florida and Stanford University. A drag-free satellite (a) contains and shields a free-floating test mass from all non-gravitational forces, and (b) precisely measures the position of the test mass inside the satellite. A feedback control system commands thrusters to fly the 'tender' spacecraft with respect to the test mass. Thus, both test mass and spacecraft follow a pure geodesic in spacetime. By tracking the relative positions of low Earth orbiting drag-free satellites, using laser interferometry for example, the detailed shape of geodesics, and through analysis, the higher order harmonics of the Earth's geopotential can be determined. Drag-free systems can be orders of magnitude more accurate that accelerometer-based systems because they fundamentally operate at extremely low acceleration levels, and are therefore not limited by dynamic range like accelerometers. Since no test mass suspension force is required, larger gaps between the test mass and satellite are possible, which reduces the level of unwanted disturbing forces produced by the satellite itself. The small satellite platform also enables cost-effective constellations, which can increase the temporal resolution of gravity field maps by more-frequently observing given locations on the Earth. Mixed-orbit constellations can also markedly enhance observational strength, decorrelate gravity coefficient estimates, and help address the fundamental aliasing problem that exists with previous missions. The

  6. Structural System Design of Mobile Satellite Communication System Vehicular Station Based on SUV Platform%某SUV平台动中通结构总体设计探讨

    Institute of Scientific and Technical Information of China (English)

    白旭东

    2011-01-01

    介绍了某运动型多功能车(Sport Utility Vehicle,SUV)平台动中通的结构总体设计。针对SUV平台的特点,结合系统使用要求,选择了中轮廓动中通天线和取力发电的供电方式,通过对设备分类布局来提高空间利用率的方法解决了载车空间小、上装设备多的问题。从人机工程的角度探讨了在行驶状态下操作的舒适性,并给出了设备机架的限制高度。阐述了上装设备采取的抗振设计考虑。对系统的整车载荷及行驶稳定性进行了分析计算。在满足系统使用要求的同时保持了原车的优越性能,使载车完整性、安全性、可靠性和舒适性最大化,实现了人机环境的和谐。%This paper introduces the structural system design of a mobile satellite communication system vehicular station based on SUV platform.According to the characteristics of SUV platform and the using requirements of system,medium contour antenna and engine driven generator system are selected.The problem of"many facilities in small space" is well solved through classifying facilities to improve space using efficiency.From the viewpoint of ergonomics,operating comfortableness under running condition is discussed and the height limit of rack is presented.Furthermore,the anti-vibration design of facilities are described,the traveling stability and the load of vehicular station are analyzed and calculated.The design retains the superior performance of SUV while satisfying the system requirements,thus maximizing the integrity,safety,reliability,comfortableness of the vehicle,realizing a harmonious human-machine environment.

  7. A Video Game Platform for Exploring Satellite and In-Situ Data Streams

    Science.gov (United States)

    Cai, Y.

    2014-12-01

    Exploring spatiotemporal patterns of moving objects are essential to Earth Observation missions, such as tracking, modeling and predicting movement of clouds, dust, plumes and harmful algal blooms. Those missions involve high-volume, multi-source, and multi-modal imagery data analysis. Analytical models intend to reveal inner structure, dynamics, and relationship of things. However, they are not necessarily intuitive to humans. Conventional scientific visualization methods are intuitive but limited by manual operations, such as area marking, measurement and alignment of multi-source data, which are expensive and time-consuming. A new development of video analytics platform has been in progress, which integrates the video game engine with satellite and in-situ data streams. The system converts Earth Observation data into articulated objects that are mapped from a high-dimensional space to a 3D space. The object tracking and augmented reality algorithms highlight the objects' features in colors, shapes and trajectories, creating visual cues for observing dynamic patterns. The head and gesture tracker enable users to navigate the data space interactively. To validate our design, we have used NASA SeaWiFS satellite images of oceanographic remote sensing data and NOAA's in-situ cell count data. Our study demonstrates that the video game system can reduce the size and cost of traditional CAVE systems in two to three orders of magnitude. This system can also be used for satellite mission planning and public outreaching.

  8. Detection of ZY-3 Satellite Platform Jitter Using Multi-spectral Imagery

    Directory of Open Access Journals (Sweden)

    ZHU Ying

    2015-04-01

    Full Text Available Satellite platform jitter is one of the factors that affect the quality of high resolution imagery, which can cause image blur and internal distortion. Taking ZiYuan-3 (ZY-3 multi-spectral camera as a prototype, this paper proposes a satellite platform jitter detection method by utilizing multi-spectral imagery. First, imaging characteristics of multispectral camera and the main factors affecting band-to-band registration error are introduced. Then the regularity of registration error caused by platform jitter is analyzed by theoretical derivation and simulation. Meanwhile, the platform jitter detection method based on high accuracy dense points matching is presented. Finally, the experiments were conducted by using ZY-3 multi-spectral imagery captured in different time. The result indicates that ZY-3 has a periodic platform jitter about 0.6 Hz in the imaging period of test data, and the jitter amplitude across track is greater than that along track, which causes periodic band-to-band registration error with the same frequency. The result shows the possibility of the improvement in geometric processing accuracy for ZY-3 imagery products and provides an important reference for satellite platform jitter source analysis and satellite platform design optimization.

  9. Hurricane damaged fixed platforms and wellhead structures

    Energy Technology Data Exchange (ETDEWEB)

    Shuttleworth, E.P.; Frieze, P.A.

    1998-03-01

    The objective of this study was to review data on damages to offshore platforms with a view to determining their suitability for further exploitation and analysis through a preliminary assessment of trends in the data when viewed from a risk standpoint. To realise this objective, a database on hurricane and other storm related damages was generated and past design practice, particularly concerning environmental load levels, was established. Information was gathered on extreme wave heights, damages, platform details, pushover analyses and structural frame load tests. The information was obtained through: a literature survey of journals, conference proceedings, design codes and guidelines; approaches to organisations in the offshore industry with significant experience of hurricanes, storm-damaged structures and pushover analyses; and interrogation of three major databases on offshore storm and other damages - PMB, MMS and WOAD. (author)

  10. Satellite communications provisions on NASA Ames instrumented aircraft platforms for Earth science research/applications

    Science.gov (United States)

    Shameson, L.; Brass, J. A.; Hanratty, J. J.; Roberts, A. C.; Wegener, S. S.

    1995-01-01

    Earth science activities at NASA Ames are research in atmospheric and ecosystem science, development of remote sensing and in situ sampling instruments, and their integration into scientific research platform aircraft. The use of satellite communications can greatly extend the capability of these agency research platform aircraft. Current projects and plans involve satellite links on the Perseus UAV and the ER-2 via TDRSS and a proposed experiment on the NASA Advanced Communications Technology Satellite. Provisions for data links on the Perseus research platform, via TDRSS S-band multiple access service, have been developed and are being tested. Test flights at Dryden are planned to demonstrate successful end-to-end data transfer. A Unisys Corp. airborne satcom STARLink system is being integrated into an Ames ER-2 aircraft. This equipment will support multiple data rates up to 43 Mb/s each via the TDRS S Ku-band single access service. The first flight mission for this high-rate link is planned for August 1995. Ames and JPL have proposed an ACTS experiment to use real-time satellite communications to improve wildfire research campaigns. Researchers and fire management teams making use of instrumented aircraft platforms at a prescribed burn site will be able to communicate with experts at Ames, the U.S. Forest Service, and emergency response agencies.

  11. A novel approach for simulating the optical misalignment caused by satellite platform vibration in the ground test of satellite optical communication systems.

    Science.gov (United States)

    Wang, Qiang; Tan, Liying; Ma, Jing; Yu, Siyuan; Jiang, Yijun

    2012-01-16

    Satellite platform vibration causes the misalignment between incident direction of the beacon and optical axis of the satellite optical communication system, which also leads to the instability of the laser link and reduces the precision of the system. So how to simulate the satellite platform vibration is a very important work in the ground test of satellite optical communication systems. In general, a vibration device is used for simulating the satellite platform vibration, but the simulation effect is not ideal because of the limited randomness. An approach is reasonable, which uses a natural random process for simulating the satellite platform vibration. In this paper, we discuss feasibility of the concept that the effect of angle of arrival fluctuation is taken as an effective simulation of satellite platform vibration in the ground test of the satellite optical communication system. Spectrum characteristic of satellite platform vibration is introduced, referring to the model used by the European Space Agency (ESA) in the SILEX program and that given by National Aeronautics and Space Development Agency (NASDA) of Japan. Spectrum characteristic of angle of arrival fluctuation is analyzed based on the measured data from an 11.16km bi-directional free space laser transmission experiment. Spectrum characteristic of these two effects is compared. The results show that spectra of these two effects have similar variation trend with the variation of frequency and feasibility of the concept is proved by the comparison results. At last the procedure of this method is proposed, which uses the power spectra of angle of arrival fluctuation to simulate that of the satellite platform vibration. The new approach is good for the ground test of satellite optical communication systems.

  12. Innovative Large Scale Wireless Sensor Network Architecture Using Satellites and High-Altitude Platforms

    Directory of Open Access Journals (Sweden)

    Yasser Albagory

    2014-03-01

    Full Text Available Wireless sensor network has many applications and very active research area. The coverage span of this network is very important parameter where wide coverage area is a challenge. This paper proposes an architecture for large-scale wireless sensor network (LSWSN based on satellites and the High-Altitude Platforms (HAP where the sensor nodes are located on the ground and a wide coverage sink station may be in the form of a satellite or a network of HAPs. A scenario is described for multilayer LSWSN and a study for the system requirements has been established showing the number of Satellites, HAPs and coverage per each sink according to the elevation angle requirements. The Satellite-HAP-Sensor multilayer LSWSN architecture has the feasibility for effective energy and earth coverage and is optimum for covering largely sparse regions.

  13. gProcess and ESIP Platforms for Satellite Imagery Processing over the Grid

    Science.gov (United States)

    Bacu, Victor; Gorgan, Dorian; Rodila, Denisa; Pop, Florin; Neagu, Gabriel; Petcu, Dana

    2010-05-01

    The Environment oriented Satellite Data Processing Platform (ESIP) is developed through the SEE-GRID-SCI (SEE-GRID eInfrastructure for regional eScience) co-funded by the European Commission through FP7 [1]. The gProcess Platform [2] is a set of tools and services supporting the development and the execution over the Grid of the workflow based processing, and particularly the satelite imagery processing. The ESIP [3], [4] is build on top of the gProcess platform by adding a set of satellite image processing software modules and meteorological algorithms. The satellite images can reveal and supply important information on earth surface parameters, climate data, pollution level, weather conditions that can be used in different research areas. Generally, the processing algorithms of the satellite images can be decomposed in a set of modules that forms a graph representation of the processing workflow. Two types of workflows can be defined in the gProcess platform: abstract workflow (PDG - Process Description Graph), in which the user defines conceptually the algorithm, and instantiated workflow (iPDG - instantiated PDG), which is the mapping of the PDG pattern on particular satellite image and meteorological data [5]. The gProcess platform allows the definition of complex workflows by combining data resources, operators, services and sub-graphs. The gProcess platform is developed for the gLite middleware that is available in EGEE and SEE-GRID infrastructures [6]. gProcess exposes the specific functionality through web services [7]. The Editor Web Service retrieves information on available resources that are used to develop complex workflows (available operators, sub-graphs, services, supported resources, etc.). The Manager Web Service deals with resources management (uploading new resources such as workflows, operators, services, data, etc.) and in addition retrieves information on workflows. The Executor Web Service manages the execution of the instantiated workflows

  14. PRIMA Platform capability for satellite missions in LEO and MEO (SAR, Optical, GNSS, TLC, etc.)

    Science.gov (United States)

    Logue, T.; L'Abbate, M.

    2016-12-01

    PRIMA (Piattaforma Riconfigurabile Italiana Multi Applicativa) is a multi-mission 3-axis stabilized Platform developed by Thales Alenia Space Italia under ASI contract.PRIMA is designed to operate for a wide variety of applications from LEO, MEO up to GEO and for different classes of satellites Platform Family. It has an extensive heritage in flight heritage (LEO and MEO Satellites already fully operational) in which it has successfully demonstrated the flexibility of use, low management costs and the ability to adapt to changing operational conditions.The flexibility and modularity of PRIMA provides unique capability to satisfy different Payload design and mission requirements, thanks to the utilization of recurrent adaptable modules (Service Module-SVM, Propulsion Module-PPM, Payload Module-PLM) to obtain mission dependent configuration. PRIMA product line development is continuously progressing, and is based on state of art technology, modular architecture and an Integrated Avionics. The aim is to maintain and extent multi-mission capabilities to operate in different environments (LEO to GEO) with different payloads (SAR, Optical, GNSS, TLC, etc.). The design is compatible with a wide range of European and US equipment suppliers, thus maximising cooperation opportunity. Evolution activities are mainly focused on the following areas: Structure: to enable Spacecraft configurations for multiple launch; Thermal Control: to guarantee thermal limits for new missions, more demanding in terms of environment and payload; Electrical: to cope with higher power demand (e.g. electrical propulsion, wide range of payloads, etc.) considering orbital environment (e.g. lighting condition); Avionics : AOCS solutions optimized on mission (LEO observation driven by agility and pointing, agility not a driver for GEO). Use of sensors and actuators tailored for specific mission and related environments. Optimised Propulsion control. Data Handling, SW and FDIR mission customization

  15. Structural High-resolution Satellite Image Indexing

    OpenAIRE

    Xia, Gui-Song; YANG, WEN; Delon, Julie; Gousseau, Yann; Sun, Hong; Maître, Henri

    2010-01-01

    International audience; Satellite images with high spatial resolution raise many challenging issues in image understanding and pattern recognition. First, they allow measurement of small objects maybe up to 0.5 m, and both texture and geometrical structures emerge simultaneously. Second, objects in the same type of scenes might appear at different scales and orientations. Consequently, image indexing methods should combine the structure and texture information of images and comply with some i...

  16. Vibration Isolation Platform with Multiple Tuned Mass Dampers for Reaction Wheel on Satellites

    Directory of Open Access Journals (Sweden)

    Yao Zhang

    2013-01-01

    Full Text Available Vibration isolation is a direct and effective approach to improve the ultraprecise pointing capability of an imaging satellite. To have a good trade-off between the resonance amplitude and the high frequency attenuation for the original vibration isolation platform, a novel vibration isolation system for reaction wheel (RW, including a multistrut vibration isolation platform and multiple tuned mass dampers, is proposed. The first step constructs the integrated satellite dynamic model including the RWs and the vibration isolation systems, while the static and dynamic imbalances of the rotor and base movements are considered in the modeling process. The transmissibility matrix of the vibration isolation system is then obtained, and its frequency domain characteristics are described. The third part presents the application of the vibration isolation system for RWs. The effective attenuation of RW disturbances by the new vibration isolation system is illustrated, and its safety performance is also verified. Finally, using the reasonable parameters of the vibration isolation system, its performance on the satellite is testified by numerical simulations. The study shows that the novel vibration isolation system presented cannot only be successfully applied to a satellite but also improve the attitude stability.

  17. An Attitude Modelling Method Based on the Inherent Frequency of a Satellite Platform

    Science.gov (United States)

    Mo, F.; Tang, X.; Xie, J.; Yan, C.

    2017-05-01

    The accuracy of attitude determination plays a key role in the improvement of surveying and mapping accuracy for high-resolution remote-sensing satellites, and it is a bottleneck in large-scale satellite topographical mapping. As the on-board energy is constrained and the performance of an attitude-measurement device is limited, the attitude acquired is discretely sampled with a settled time interval. The larger the interval, the easier the data transmission, and the more deviation the attitude data will have. Meanwhile, several kinds of jitter frequencies have been detected in satellite platforms. This paper presents a novel attitude modelling (AttModel) method that sufficiently considers the discrete and periodic characteristics, and the attitude model built is continuous and consists of several inherent waves of different frequencies. The process of modelling includes two steps: (a) frequency detection, which uses raw gyroscope data within a period of time to detect the attitude frequencies (as the gyroscope data can actually reflect continuous, very small changes of the satellite platform), and (b) attitude modelling , which processes the attitude data that was filtered by extended Kalman filtering based on general polynomial and trigonometric polynomials, and these trigonometric polynomials are rebuilt by those frequencies detected in the first part of the modelling process. Finally, one experiment designed for verifying the effectiveness of the presented method shows that the AttModel method can reach a slightly better pointing accuracy without ground-control points than traditional attitude-interpolation methods.

  18. Automatic geolocation of targets tracked by aerial imaging platforms using satellite imagery

    Science.gov (United States)

    Shukla, P. K.; Goel, S.; Singh, P.; Lohani, B.

    2014-11-01

    Tracking of targets from aerial platforms is an important activity in several applications, especially surveillance. Knowled ge of geolocation of these targets adds additional significant and useful information to the application. This paper determines the geolocation of a target being tracked from an aerial platform using the technique of image registration. Current approaches utilize a POS to determine the location of the aerial platform and then use the same for geolocation of the targets using the principle of photogrammetry. The constraints of cost and low-payload restrict the applicability of this approach using UAV platforms. This paper proposes a methodology for determining the geolocation of a target tracked from an aerial platform in a partially GPS devoid environment. The method utilises automatic feature based registration technique of a georeferenced satellite image with an ae rial image which is already stored in UAV's database to retrieve the geolocation of the target. Since it is easier to register subsequent aerial images due to similar viewing parameters, the subsequent overlapping images are registered together sequentially thus resulting in the registration of each of the images with georeferenced satellite image thus leading to geolocation of the target under interest. Using the proposed approach, the target can be tracked in all the frames in which it is visible. The proposed concept is verified experimentally and the results are found satisfactory. Using the proposed method, a user can obtain location of target of interest as well features on ground without requiring any POS on-board the aerial platform. The proposed approach has applications in surveillance for target tracking, target geolocation as well as in disaster management projects like search and rescue operations.

  19. Fuzzy Control of Structural Vibration for Offshore Platforms

    Institute of Scientific and Technical Information of China (English)

    ZHOUYa-jun; ZHAODe-you

    2004-01-01

    During the past three decades, fuzzy logic feedback control systems have been utilized for the suppression of structural vibration in numerous studies. With the main advantages of the fuzzy controller, the inherent robustness and ability to handle nonlinearity, uncertainty and imprecision of the structure, active structural control of offshore platforms is accomplished. The robustness of the controller has been demonstrated through the uncertainty in damping ratios of the platforms. The study suggests that the proposed fuzzy control algorithm of structural vibration for offshore platforms is effective and feasible,thus improving both serviceability and survival. This present method undoubtedly provides an efficient way of the active control for offshore platforms.

  20. A microchip platform for structural oncology applications

    Science.gov (United States)

    Winton, Carly E; Gilmore, Brian L; Demmert, Andrew C; Karageorge, Vasilea; Sheng, Zhi; Kelly, Deborah F

    2016-01-01

    Recent advances in the development of functional materials offer new tools to dissect human health and disease mechanisms. The use of tunable surfaces is especially appealing as substrates can be tailored to fit applications involving specific cell types or tissues. Here we use tunable materials to facilitate the three-dimensional (3D) analysis of BRCA1 gene regulatory complexes derived from human cancer cells. We employed a recently developed microchip platform to isolate BRCA1 protein assemblies natively formed in breast cancer cells with and without BRCA1 mutations. The captured assemblies proved amenable to cryo-electron microscopy (EM) imaging and downstream computational analysis. Resulting 3D structures reveal the manner in which wild-type BRCA1 engages the RNA polymerase II (RNAP II) core complex that contained K63-linked ubiquitin moieties—a putative signal for DNA repair. Importantly, we also determined that molecular assemblies harboring the BRCA15382insC mutation exhibited altered protein interactions and ubiquitination patterns compared to wild-type complexes. Overall, our analyses proved optimal for developing new structural oncology applications involving patient-derived cancer cells, while expanding our knowledge of BRCA1’s role in gene regulatory events. PMID:27583302

  1. Real-time horizontality adjusting and control system of a large platform applied to satellite experiment

    Institute of Scientific and Technical Information of China (English)

    ZHONG Shi-sheng; ZHANG Shi-peng; WANG Rui

    2007-01-01

    In order to satisfy a satellite horizontality requirement in an experiment, it is indispensable to monitor and adjust the horizontality of a large platform loading the satellite under the condition of ultra-low temperature with real time. So the control system design and control strategy are described in detail to accomplish the horizontality monitoring and adjusting. The system adopts the industry control computer as the upper computer and the SIEMENS S7-300 PLC as the lower computer. The upper computer that bases on industry configuration software IFIX takes charge of monitoring the platform and puts forward the control strategy. PLC takes charge of receiving the adjusting instructions and controlling the legs moving to accomplish the horizontality adjusting. The horizontality adjusting strategy is emphasized and the concept of grads is introduced to establish a mathematics model of the platform inclined state, so the adjusting method is obtained. Accordingly the key question of the automatic horizontality adjusting is solved in this control system.

  2. Volcview: A Web-Based Platform for Satellite Monitoring of Volcanic Activity and Eruption Response

    Science.gov (United States)

    Schneider, D. J.; Randall, M.; Parker, T.

    2014-12-01

    The U.S. Geological Survey (USGS), in cooperation with University and State partners, operates five volcano observatories that employ specialized software packages and computer systems to process and display real-time data coming from in-situ geophysical sensors and from near-real-time satellite sources. However, access to these systems both inside and from outside the observatory offices are limited in some cases by factors such as software cost, network security, and bandwidth. Thus, a variety of Internet-based tools have been developed by the USGS Volcano Science Center to: 1) Improve accessibility to data sources for staff scientists across volcano monitoring disciplines; 2) Allow access for observatory partners and for after-hours, on-call duty scientists; 3) Provide situational awareness for emergency managers and the general public. Herein we describe VolcView (volcview.wr.usgs.gov), a freely available, web-based platform for display and analysis of near-real-time satellite data. Initial geographic coverage is of the volcanoes in Alaska, the Russian Far East, and the Commonwealth of the Northern Mariana Islands. Coverage of other volcanoes in the United States will be added in the future. Near-real-time satellite data from NOAA, NASA and JMA satellite systems are processed to create image products for detection of elevated surface temperatures and volcanic ash and SO2 clouds. VolcView uses HTML5 and the canvas element to provide image overlays (volcano location and alert status, annotation, and location information) and image products that can be queried to provide data values, location and measurement capabilities. Use over the past year during the eruptions of Pavlof, Veniaminof, and Cleveland volcanoes in Alaska by the Alaska Volcano Observatory, the National Weather Service, and the U.S. Air Force has reinforced the utility of shared situational awareness and has guided further development. These include overlay of volcanic cloud trajectory and

  3. Pi-Sat: A Low Cost Small Satellite and Distributed Spacecraft Mission System Test Platform

    Science.gov (United States)

    Cudmore, Alan

    2015-01-01

    Current technology and budget trends indicate a shift in satellite architectures from large, expensive single satellite missions, to small, low cost distributed spacecraft missions. At the center of this shift is the SmallSatCubesat architecture. The primary goal of the Pi-Sat project is to create a low cost, and easy to use Distributed Spacecraft Mission (DSM) test bed to facilitate the research and development of next-generation DSM technologies and concepts. This test bed also serves as a realistic software development platform for Small Satellite and Cubesat architectures. The Pi-Sat is based on the popular $35 Raspberry Pi single board computer featuring a 700Mhz ARM processor, 512MB of RAM, a flash memory card, and a wealth of IO options. The Raspberry Pi runs the Linux operating system and can easily run Code 582s Core Flight System flight software architecture. The low cost and high availability of the Raspberry Pi make it an ideal platform for a Distributed Spacecraft Mission and Cubesat software development. The Pi-Sat models currently include a Pi-Sat 1U Cube, a Pi-Sat Wireless Node, and a Pi-Sat Cubesat processor card.The Pi-Sat project takes advantage of many popular trends in the Maker community including low cost electronics, 3d printing, and rapid prototyping in order to provide a realistic platform for flight software testing, training, and technology development. The Pi-Sat has also provided fantastic hands on training opportunities for NASA summer interns and Pathways students.

  4. A modeling and simulation of control system of satellite tracking platform an- tenna

    Institute of Scientific and Technical Information of China (English)

    LIU Xiaojun; GONG Lihong

    2012-01-01

    Based on the platform of mobile carrier satellite tracking has a wide range of applications. The paper adopts the advanced method of to step response identify, using the data obtained by the experiment model of high-speed acquisition, using the method of the least squares, finally the antenna control system model function was identified. Make use of integral separation algorithm, simu- link simulation and experiment analysis to set the control parameters of it. Stimulate the signal antenna control system under inter- fering. The experiment of the simulation experiment showed that the antenna control system model is stable with little error.

  5. Wireless sensing experiments for structural vibration monitoring of offshore platform

    Institute of Scientific and Technical Information of China (English)

    Yan YU; Jinping OU

    2008-01-01

    In order to validate the feasibility of applying wireless sensing technique to structural monitoring of offshore platform,the experiment of wireless sensor network on offshore platform is presented in this paper.First,wireless sensor network and its topology structure is put forward,and the design of sensor nodes,base station,communication protocol is discussed according to selfdeveloped wireless sensor network.Second,true offshore platform and its experimental model are introduced.Finally,wireless sensing experiment for offshore platform structure is completed and the analysis of the experimental result is given.The research shows that wireless sensor network applied to offshore platform can reflect the vibration of the structure;the sensor nodes are fixed and removed expediently,which saves the cost of signal line as well as installation time.

  6. Low-cost Citizen Science Balloon Platform for Measuring Air Pollutants to Improve Satellite Retrieval Algorithms

    Science.gov (United States)

    Potosnak, M. J.; Beck-Winchatz, B.; Ritter, P.

    2016-12-01

    High-altitude balloons (HABs) are an engaging platform for citizen science and formal and informal STEM education. However, the logistics of launching, chasing and recovering a payload on a 1200 g or 1500 g balloon can be daunting for many novice school groups and citizen scientists, and the cost can be prohibitive. In addition, there are many interesting scientific applications that do not require reaching the stratosphere, including measuring atmospheric pollutants in the planetary boundary layer. With a large number of citizen scientist flights, these data can be used to constrain satellite retrieval algorithms. In this poster presentation, we discuss a novel approach based on small (30 g) balloons that are cheap and easy to handle, and low-cost tracking devices (SPOT trackers for hikers) that do not require a radio license. Our scientific goal is to measure air quality in the lower troposphere. For example, particulate matter (PM) is an air pollutant that varies on small spatial scales and has sources in rural areas like biomass burning and farming practices such as tilling. Our HAB platform test flight incorporates an optical PM sensor, an integrated single board computer that records the PM sensor signal in addition to flight parameters (pressure, location and altitude), and a low-cost tracking system. Our goal is for the entire platform to cost less than $500. While the datasets generated by these flights are typically small, integrating a network of flight data from citizen scientists into a form usable for comparison to satellite data will require big data techniques.

  7. Technical and economical comparison between a modular geostationary space platform and a cluster of satellites

    Science.gov (United States)

    Molette, P.; Cougnet, C.; Saint-Aubert, Ph.; Young, R. W.; Helas, D.

    In recent years, the identification of a large number of telecommunication missions reflects a growing demand for the provision of a large variety of communications and data transmission services performed by a space segment. At present, communication space segment use a single operational satellite per orbit position. However, the expected increase of communication channels per space segment will lead to a corresponding increase of satellite mass and size which could exceed the capabilities of existing launch vehicles in terms of mass and volume requirements. Those considerations, coupled with the threatening saturation of the geostationary orbit, lead to the conclusion that an optimal space segment concept must be defined on a technical as well as economical point of view. Two main concepts may be envisaged: one is a large platform, which can be assembled either in geostationary orbit (resulting in several launches, rendez-vous and docking), or in low earth orbit by using the STS; the other concept is a cluster of satellites. These candidate concepts are designed to meet the requirements of a reference mission. They are characterized by the required number of modules to be launched, the type of launcher, the new subsystems or equipments to be developed. The concepts are evaluated following technical criteria such as adaptability to other missions, flexibility, growth potential. A cost/benefit evaluation of each solution is presented. A comparison between the different concepts is then made on the basis of the technical/economical attractiveness of each solution.

  8. The Arizona Wallow Wildfire: Monitoring It's Progress, Extreme Behavior and Long Range Smoke Transport from Multiple Satellite Platforms

    Science.gov (United States)

    Ruminski, M. G.; Fromm, M. D.; Ramirez, E.

    2011-12-01

    The Wallow fire in southeast Arizona was the largest wildfire in Arizona history, consuming over 500,000 acres. The fire began on May 29, 2011 and quickly grew to nearly 70,000 acres in size by June 4. This event exhibited anomalous behavioral characteristics as deep pyroconvection was observed for an unprecedented six consecutive days. The rapid spread and extreme pyroconvection occurred in response to a unique confluence of high biomass fuel availability in arid conditions. Strong winds in combination with low relative humidity and atmospheric instability acted to create an environment conducive to explosive fire growth. The resultant smoke from the blaze reached an altitude of nearly 15 km into the upper troposphere/lower stratosphere and eventually crossed the Atlantic reaching Europe. This presentation focuses on the detection and characterization of the Wallow fire from a satellite perspective. Geostationary and polar orbiting satellite platforms have captured various aspects of the fire and resulting smoke plumes. An animation of nearly 100 NOAA polar orbiting 4 micron channel images during the first 2 weeks of the fire illustrate its explosive growth while GOES visible channel animations display the density and coverage of the pall of smoke and the development of pyroconvection. True color MODIS imagery provides higher resolution views of the pyrocumulonimbus clouds at different stages in their evolution. CALIPSO, GOME2, and OMI data detail the vertical structure and composition of the plume as it drifts eastward and expands in coverage, eventually reaching Europe.

  9. Finite Element Analysis of Deformed Legs of Offshore Platform Structures

    Institute of Scientific and Technical Information of China (English)

    柳春图; 秦太验; 段梦兰

    2002-01-01

    The element stiffness matrix of the equivalent beam or pipe element of the deformed leg of the platform is derived bythe finite element method. The stresses and displacements of some damaged components are calculated, and the numeri-cal solutions agree well with those obtained by the fine mesh finite element method. Finally, as an application of thismethod, the stresses of some platform structures are calculated and analyzed.

  10. A Robust Controller Structure for Pico-Satellite Applications

    DEFF Research Database (Denmark)

    Kragelund, Martin Nygaard; Green, Martin; Kristensen, Mads

    This paper describes the development of a robust controller structure for use in pico-satellite missions. The structure relies on unknown disturbance estimation and use of robust control theory to implement a system that is robust to both unmodeled disturbances and parameter uncertainties. As one...... possible application, a satellite mission with the purpose of monitoring shipping routes for oil spills has been considered. However, it is the aim of the control structure to be widely applicable and adaptable for a vide variety of pico-satellite missions. The robust control structure has been evaluated...

  11. The structural biology and genomics platform in strasbourg: an overview.

    Science.gov (United States)

    Busso, Didier; Thierry, Jean-Claude; Moras, Dino

    2008-01-01

    This chapter describes the modules and facilities of the Structural Biology and Genomics Platform (SBGP), Strasbourg, France. The platform consists of three modules (cloning, mini-expression screening; optimization-large scale protein production; characterization, crystallization) with dedicated scientists, and other facilities for purifying recombinant proteins and solving three-dimensional (3D) structures. Strong collaborations have been established with the Integrative Bioinformatics and Genomics group, located in the same institition, for target selection and domains definition. To handle large numbers of samples, classical and new protocols were adapted to automation, increasing reproducibility and reducing error risks as well. Using the platform and its facilities, over 2,000 expression vectors have been constructed and more than 40 novel structures, of mostly human proteins, have been solved.

  12. Dynamic characteristics and performance evaluation for the part strut failure of the vibration isolation platform on satellites

    Science.gov (United States)

    Zhang, Yao; Sheng, Chao; Guo, Zixi; Wang, Youyi; Li, Wenbo

    2017-04-01

    The dynamic characteristics and performance evaluation for the part strut failure of the vibration isolation platform are presented in this paper. The first step provides and mathematically describes two types of strut failure: fractured and stuck. Secondly, the dynamic model of the vibration isolation platform, which considers the part strut failure, is established using the Newton-Euler method and a constraint equation to evaluate its dynamic characteristics and performance. Then, with reasonable assumptions, the dynamic model of the satellite, which has a vibration isolation platform and vibration sources (such as control moment gyros) of three working situations (without and with two types of strut failure), is simplified to analyse the frequency domain characteristic and coupling characteristic with the attitude control system. Finally, a numerical simulation is used to study the effect of the vibration isolation platform with part strut failure on the attitude control and stabilization, and the attitude control performance is evaluated.

  13. Novel low cost standardized Nano-Satellite structure bus for LEO missions

    Science.gov (United States)

    Anubhav, T.; Sarwesh, P.; Narayan, V.; Varma, P. A.; Prasad, R. A.; Loganathan, M.; Rao, D. N.; Sriram, S.; Venkatesh, M.

    This paper focuses on SRMSAT STRUCTURE BUS which is a standardized Nano-Satellite structure bus. It provides a standard platform for a wide variety of missions in LEO and can be realized in a very short developmental period. The bus was designed and developed for SRMSAT, the SRM University (Sri Ramaswamy Memorial University) student Nano-Satellite, by the undergraduate students and faculty of SRM University in collaboration with Indian Space Research Organization (ISRO). The bus can support payloads up to a mass of 20kg. SRMSAT STRUCTURE BUS has a mass of around 6 kg and dimensions 280mm × 280mm × 280mm with an available volume of 11000 cc. Vibration Testing of the bus has been performed upto 6.7 gRMS. This makes the satellite capable of being launched by any launch vehicle in the world. An innovative PCB mounting design has been introduced in this structure bus which facilitates mounting of a maximum 7 PCB trays independently, each tray capable of holding a 250 mm2 PCB. Structural analysis of SRMSAT STRUCTURE BUS was done using NX Nastran. The boundary conditions for each analysis were defined based on the loading conditions as specified by the launcher, PSLV (Polar Satellite Launch Vehicle). Optimization of each individual component was performed by maintaining a minimum threshold between the local frequencies of the component and global frequencies of the entire satellite. Static, Modal, Harmonic and Random Vibration analysis of the structure bus was performed. This paper also describes the methodology followed in the static and dynamic analysis of the structure bus to finalize the design. The results have been tested and validated at ISRO Satellite Centre, Bangalore with around 90% accuracy and the structure has been certified as a standard structure bus for Nano-satellite missions. In terms of expandability, this structure bus is capable of accommodating deployable solar panels. Also, the payload mounting is not only restricted to th- bottom deck but can

  14. Development of 30/20 GHz satellite antenna structures

    Science.gov (United States)

    Minomo, M.; Yasaka, T.

    1986-08-01

    An antenna structural design for a large capacity communication satellite using 13 beams in the 30/20GHz frequency bands is discussed. This design is to be utilized in developing a more cost effective domestic satellite communication system for Japan. This system requires 2 high precision deployable antennas with projected aperture diameters of 3.5m at 20GHz and 2.5m at 30GHz. The in-orbit demonstration will use the ETS-6 satellite. Based on experience in the development of spaceborne antennas for 30/20GHz bands (e.g., for the CS-2 and CS-3 satellites) activities in structural design of high precision deployable antennas show the truss reflector structure is promising for achieving required structural properties.

  15. Rebalancing interests and power structures on crowdworking platforms

    Directory of Open Access Journals (Sweden)

    Ayad Al-Ani

    2016-06-01

    Full Text Available Crowdwork on virtual platforms is developing into a recognisable employment and business model on the internet. Despite their many differences, the platforms that have emerged over the last few years have one thing in common: a crowd of individual producers and capabilities is mobilised – in the form of labour, accommodation or durable goods – onto the market in cooperation and competition with firms from traditional industries. This study analyses the factors crowdworkers consider relevant in their work and the measures they view as helpful in improving their working relationship with platforms. It is apparent that, in the best tradition of the peer economy, this new type of worker still considers learning and fun important factors for his or her engagement. Despite these effectively intrinsic factors, workers are quite aware of their situation, which does not put them on equal terms with the platform’s algorithms and customer focus. This awareness of power disparities does not lead them, however, to reconsider their effectiveness when it comes to renegotiating terms with the platform: when specifically asked about the role of unions, the majority of crowdworkers did not expect help in self-organisation from these institutions. Considering the difficulties in regulating the market for platforms, (self- organisation of crowdworkers, however, is an important prerequisite in rebalancing the power structure dominated by platform owners and their customers. Self-organisation is something digital natives are quite familiar with and we have to assume that crowdworkers are perhaps overconfident in their abilities. And due to the novelty of this industry, this confidence has not been shaken yet by labour disputes or even by growing dissatisfaction with platforms.

  16. LDAS-Monde: Global scale satellite driven Land Data Assimilation System based on SURFEX modelling platform

    Science.gov (United States)

    Munier, Simon; Albergel, Clément; Leroux, Delphine; Calvet, Jean-Christophe

    2017-04-01

    In the past decades, large efforts have been made to improve our understanding of the dynamics of the terrestrial water cycle, including vertical and horizontal water fluxes as well as water stored in the biosphere. The soil water content is closely related to the development of the vegetation, which is in turn closely related to the water and energy exchanges with the atmosphere (through evapotranspiration) as well as to carbon fluxes. Land Surface Models (LSMs) are usually designed to represent biogeophysical variables, such as Surface and Root Zone Soil Moisture (SSM, RZSM) or Leaf Area Index (LAI), in order to simulate water, energy and carbon fluxes at the interface between land and atmosphere. With the recent increase of satellite missions and derived products, LSMs can benefit from Earth Observations via Data Assimilation systems to improve their representation of different biogeophysical variables. This study, which is part of the eartH2Observe European project (http://www.earth2observe.eu), presents LDAS-Monde, a global Land Data Assimilation System using an implementation of the Simplified Extended Kalman Filter (SEKF) in the Météo-France's modelling platform (SURFEX). SURFEX is based on the coupling of the multilayer, CO2-responsive version of the Interactions Between Soil, Biosphere, and Atmosphere model (ISBA) coupled with Météo-France's version of the Total Runoff Integrating Pathways continental hydrological system (CTRIP). Two global operational datasets derived from satellite observations are assimilated simultaneously: (i) SSM from the ESA Climate Change Initiative and (ii) LAI from the Copernicus Global Land Service project. Atmospheric forcing used in SURFEX are derived from the ERA-Interim reanalysis and corrected from GPCC precipitations. The simulations are conducted at the global scale at a 1 degree spatial resolution over the period 2000-2014. An analysis of the model sensitivity to the assimilated observations is performed over

  17. Optimum Design of Structure Shape for Offshore Jacket Platforms

    Institute of Scientific and Technical Information of China (English)

    FENG Sheng; SONG Yupu; ZHANG Rixiang

    2000-01-01

    With the introduction of the design variables of nodal coordinates, which reflect the embedded depth of the pile and the jacket bed height, a shape optimum design model for offshore jacket platforms is established. A sequential two-level optimum algorithm is developed based on the design variable gradation. On the basis of the finite element method, the sensitivity of the objective function and nodal displacement is analyzed. As an example, the BZ281 oil storage offshore platform, which lies in the Bohai oil field, is designed with the shape optimum model The results are compared with the cross-section optimum design. The tendency of design variables and its reasons in the two methods are analyzed. In the shape optimum design, the value of objective function is obviously smaller than that of the initial design and the cross-section optimum design. Therefore, the advantage of structure shape optimum design for jacket platforms is remarkable.

  18. Exploring Google Earth Engine platform for big data processing: classification of multi-temporal satellite imagery for crop mapping

    Science.gov (United States)

    Shelestov, Andrii; Lavreniuk, Mykola; Kussul, Nataliia; Novikov, Alexei; Skakun, Sergii

    2017-02-01

    Many applied problems arising in agricultural monitoring and food security require reliable crop maps at national or global scale. Large scale crop mapping requires processing and management of large amount of heterogeneous satellite imagery acquired by various sensors that consequently leads to a “Big Data” problem. The main objective of this study is to explore efficiency of using the Google Earth Engine (GEE) platform when classifying multi-temporal satellite imagery with potential to apply the platform for a larger scale (e.g. country level) and multiple sensors (e.g. Landsat-8 and Sentinel-2). In particular, multiple state-of-the-art classifiers available in the GEE platform are compared to produce a high resolution (30 m) crop classification map for a large territory ( 28,100 km2 and 1.0 M ha of cropland). Though this study does not involve large volumes of data, it does address efficiency of the GEE platform to effectively execute complex workflows of satellite data processing required with large scale applications such as crop mapping. The study discusses strengths and weaknesses of classifiers, assesses accuracies that can be achieved with different classifiers for the Ukrainian landscape, and compares them to the benchmark classifier using a neural network approach that was developed in our previous studies. The study is carried out for the Joint Experiment of Crop Assessment and Monitoring (JECAM) test site in Ukraine covering the Kyiv region (North of Ukraine) in 2013. We found that Google Earth Engine (GEE) provides very good performance in terms of enabling access to the remote sensing products through the cloud platform and providing pre-processing; however, in terms of classification accuracy, the neural network based approach outperformed support vector machine (SVM), decision tree and random forest classifiers available in GEE.

  19. Influence of Floating Monitoring Platform Structure on the Hydrostatic Characteristics

    Directory of Open Access Journals (Sweden)

    Su Feng

    2015-01-01

    Full Text Available According to the environment and work styles, the underwater monitoring devices can be divided into three type, fixed monitoring device, the floating monitoring device and mobile monitoring device. Floating monitoring platform is a new type of monitoring device of the floating monitoring device, which is mainly used for underwater video monitoring of pool. as the floating platform monitoring in water motion and hydrostatic characteristics are closely related, the influent of counterweight, weight distance and floating body diameter of the structure parameters on its hydrostatic characteristics and the natural periods for roll, pitch and heave should be considered, In this work, the floating body diameter influent most, the counterweight followed, and the structure parameters have different influence on the natural periods for roll, pitch and heave , it need to be analyzed according to the concrete structure parameters.

  20. An Improved Method of Structure Damage Diagnosis for Jacket Platforms

    Institute of Scientific and Technical Information of China (English)

    Juan Liu; Weiping Huang; Xiang Shi

    2011-01-01

    In the exploitation of ocean oil and gas,many offshore structures may be damaged due to the severe environment,so an effective method of diagnosing structural damage is urgently needed to locate the damage and evaluate its severity.Genetic algorithms have become some of the most important global optimization tools and been widely used in many fields in recent years because of their simple operation and strong robustness.Based on the natural frequencies and mode shapes of the structure,the damage diagnosis of a jacket offshore platform is attributed to an optimization problem and studied by using a genetic algorithm.According to the principle that the structural stiffness of a certain direction can be greatly affected only when the brace bar in the corresponding direction is damaged,an improved objective function was proposed in this paper targeting measurement noise and the characteristics of modal identification for offshore platforms.This function can be used as fitness function of a genetic algorithm,and both numerical simulation and physical model test results show that the improved method may locate the structural damage and evaluate the severity of a jacket offshore platform satisfactorily while improving the robustness of evolutionary searching and the reliability of damage diagnosis.

  1. Automatic geolocation of targets tracked by aerial imaging platforms using satellite imagery

    OpenAIRE

    Shukla, P. K.; Goel, S.; Singh, P.; B. Lohani

    2014-01-01

    Tracking of targets from aerial platforms is an important activity in several applications, especially surveillance. Knowled ge of geolocation of these targets adds additional significant and useful information to the application. This paper determines the geolocation of a target being tracked from an aerial platform using the technique of image registration. Current approaches utilize a POS to determine the location of the aerial platform and then use the same for geolocation of the...

  2. Fiber Optic Sensors for Structural Health Monitoring of Air Platforms

    Directory of Open Access Journals (Sweden)

    Jianping Yao

    2011-03-01

    Full Text Available Aircraft operators are faced with increasing requirements to extend the service life of air platforms beyond their designed life cycles, resulting in heavy maintenance and inspection burdens as well as economic pressure. Structural health monitoring (SHM based on advanced sensor technology is potentially a cost-effective approach to meet operational requirements, and to reduce maintenance costs. Fiber optic sensor technology is being developed to provide existing and future aircrafts with SHM capability due to its unique superior characteristics. This review paper covers the aerospace SHM requirements and an overview of the fiber optic sensor technologies. In particular, fiber Bragg grating (FBG sensor technology is evaluated as the most promising tool for load monitoring and damage detection, the two critical SHM aspects of air platforms. At last, recommendations on the implementation and integration of FBG sensors into an SHM system are provided.

  3. Crack detection in offshore platform structure based on structural intensity approach

    Science.gov (United States)

    Tian, Xiaojie; Liu, Guijie; Gao, Zhiming; Chen, Pengfei; Mu, Weilei

    2017-02-01

    Structural intensity approach is introduced to study the crack detection for offshore platform in the paper. The Line Spring Model (LSM) of surface crack is proposed based on plate crack structure, and thus the relationship between the additional angle, displacement and crack relative depth is achieved. Besides, the concept of appended structure-borne sound intensity is introduced. The expression of appended structural intensity for crack damage is derived. By observing the input energy, distribution, transmission and vibration performance of structure intensity, evidence is provided for detection of crack location. Vibration analysis is conducted on the whole platform under multi environment load. Using the structural intensity approach, the crack is detected on the key point easily. Moreover, the K-shape welded pipe point is detected using structural intensity approach, and the crack can be detected accurately. Therefore, development structural intensity approach would be extremely useful to spread out technologies that can be applied for offshore platform crack detection accurately.

  4. Transparent Gap Filler Solution over a DVB-RCS2 Satellite Platform in a Railway Scenario: Performance Evaluation Study

    Directory of Open Access Journals (Sweden)

    Peppino Fazio

    2015-01-01

    Full Text Available In this work, a performance study of a system equipped with a transparent Gap Filler solution in a DVB-RCS2 satellite platform has been provided. In particular, a simulation model based on a 3-state Markov chain, overcoming the blockage status through the introduction of a transparent Gap Filler (using devices on both tunnel sides has been implemented. The handover time, due to switching mechanism between satellite and Gap Filler, has been taken into account. As reference scenario, the railway market has been considered, which is characterized by a N-LOS condition, due to service disruptions caused by tunnels, vegetation and buildings. The system performance, in terms of end-to-end delay, queue size and packet loss percentage, have been evaluated, in order to prove the goodness of communications in a real railroad path.

  5. Structured reporting platform improves CAD-RADS assessment.

    Science.gov (United States)

    Szilveszter, Bálint; Kolossváry, Márton; Karády, Júlia; Jermendy, Ádám L; Károlyi, Mihály; Panajotu, Alexisz; Bagyura, Zsolt; Vecsey-Nagy, Milán; Cury, Ricardo C; Leipsic, Jonathon A; Merkely, Béla; Maurovich-Horvat, Pál

    2017-09-18

    Structured reporting in cardiac imaging is strongly encouraged to improve quality through consistency. The Coronary Artery Disease - Reporting and Data System (CAD-RADS) was recently introduced to facilitate interdisciplinary communication of coronary CT angiography (CTA) results. We aimed to assess the agreement between manual and automated CAD-RADS classification using a structured reporting platform. Five readers prospectively interpreted 500 coronary CT angiographies using a structured reporting platform that automatically calculates the CAD-RADS score based on stenosis and plaque parameters manually entered by the reader. In addition, all readers manually assessed CAD-RADS blinded to the automatically derived results, which was used as the reference standard. We evaluated factors influencing reader performance including CAD-RADS training, clinical load, time of the day and level of expertise. Total agreement between manual and automated classification was 80.2%. Agreement in stenosis categories was 86.7%, whereas the agreement in modifiers was 95.8% for "N", 96.8% for "S", 95.6% for "V" and 99.4% for "G". Agreement for V improved after CAD-RADS training (p = 0.047). Time of the day and clinical load did not influence reader performance (p > 0.05 both). Less experienced readers had a higher total agreement as compared to more experienced readers (87.0% vs 78.0%, respectively; p = 0.011). Even though automated CAD-RADS classification uses data filled in by the readers, it outperforms manual classification by preventing human errors. Structured reporting platforms with automated calculation of the CAD-RADS score might improve data quality and support standardization of clinical decision making. Copyright © 2017. Published by Elsevier Inc.

  6. Application of Single-Mode Fiber-Coupled Receivers in Optical Satellite to High-Altitude Platform Communications

    Directory of Open Access Journals (Sweden)

    Oswald Wallner

    2008-05-01

    Full Text Available In a free-space optical communication system employing fiber-optic components, the phasefront distortions induced by atmospheric turbulence limit the efficiency with which the laser beam is coupled into a single-mode fiber. We analyze different link scenarios including a geostationary (GEO satellite, a high-altitude platform (HAP, and an optical ground station (OGS. Single-mode coupled optically preamplified receivers allow for efficient suppression of background noise and highly sensitive detection. While GEO-to-OGS communication suffers from atmospheric turbulence, we demonstrate that GEO-to-HAP communication allows for close to diffraction-limited performance when applying tip-tilt correction.

  7. Application of Single-Mode Fiber-Coupled Receivers in Optical Satellite to High-Altitude Platform Communications

    Directory of Open Access Journals (Sweden)

    Fidler Franz

    2008-01-01

    Full Text Available Abstract In a free-space optical communication system employing fiber-optic components, the phasefront distortions induced by atmospheric turbulence limit the efficiency with which the laser beam is coupled into a single-mode fiber. We analyze different link scenarios including a geostationary (GEO satellite, a high-altitude platform (HAP, and an optical ground station (OGS. Single-mode coupled optically preamplified receivers allow for efficient suppression of background noise and highly sensitive detection. While GEO-to-OGS communication suffers from atmospheric turbulence, we demonstrate that GEO-to-HAP communication allows for close to diffraction-limited performance when applying tip-tilt correction.

  8. Requalification of offshore structures. Reliability analysis of platform

    Energy Technology Data Exchange (ETDEWEB)

    Bloch, A.; Dalsgaard Soerensen, J. [Aalborg Univ. (Denmark)

    1999-03-01

    A preliminary reliability analysis has been performed for an example platform. In order to model the structural response such that it is possible to calculate reliability indices, approximate quadratic response surfaces have been determined for cross-sectional forces. Based on a deterministic, code-based analysis the elements and joints which can be expected to be the most critical are selected and response surfaces are established for the cross-sectional forces in those. A stochastic model is established for the uncertain variables. The reliability analysis shows that with this stochastic model the smallest reliability indices for elements are about 3.9. The reliability index for collapse (pushover) is estimated to 6.7 and the reliability index for fatigue failure using a crude model is for the expected most critical detail estimated to 3.2, corresponding to the accumulated damage during the design lifetime of the platform. These reliability indices are considered to be reasonable compared with values recommended by e.g. ISO. The most important stochastic variables are found to be the wave height and the drag coefficient (including the model uncertainty related to estimation of wave forces on the platform). (au)

  9. Life Science Research in Outer Space: New Platform Technologies for Low-Cost, Autonomous Small Satellite Missions

    Science.gov (United States)

    Ricco, Antonio J.; Parra, Macarena P.; Niesel, David; McGinnis, Michael; Ehrenfreund, Pascale; Nicholson, Wayne; Mancinelli, Rocco; Piccini, Matthew E.; Beasley, Christopher C.; Timucin, Linda R.; Ricks, Robert D.; McIntyre, Michael J.; Squires, David; Yost, Bruce D.; Hines, John W.

    2009-01-01

    We develop integrated instruments and platforms suitable for economical, frequent space access for autonomous life science experiments and processes in outer space. The technologies represented by three of our recent free-flyer small-satellite missions are the basis of a rapidly growing toolbox of miniaturized biologically/biochemically-oriented instrumentation now enabling a new generation of in-situ space experiments. Autonomous small satellites ( 1 50 kg) are less expensive to develop and build than fullsize spacecraft and not subject to the comparatively high costs and scheduling challenges of human-tended experimentation on the International Space Station, Space Shuttle, and comparable platforms. A growing number of commercial, government, military, and civilian space launches now carry small secondary science payloads at far lower cost than dedicated missions; the number of opportunities is particularly large for so-called cube-sat and multicube satellites in the 1 10 kg range. The recent explosion in nano-, micro-, and miniature technologies, spanning fields from telecommunications to materials to bio/chemical analysis, enables development of remarkably capable autonomous miniaturized instruments to accomplish remote biological experimentation. High-throughput drug discovery, point-of-care medical diagnostics, and genetic analysis are applications driving rapid progress in autonomous bioanalytical technology. Three of our recent missions exemplify the development of miniaturized analytical payload instrumentation: GeneSat-1 (launched: December 2006), PharmaSat (launched: May 2009), and O/OREOS (organism/organics exposure to orbital stresses; scheduled launch: May 2010). We will highlight the overall architecture and integration of fluidic, optical, sensor, thermal, and electronic technologies and subsystems to support and monitor the growth of microorganisms in culture in these small autonomous space satellites, including real-time tracking of their culture

  10. Comparison of two Satellite Imaging Platforms for Evaluating Sand Dune Migration in the Ubari Sand Sea (Libyan Fazzan)

    Science.gov (United States)

    Els, A.; Merlo, S.; Knight, J.

    2015-04-01

    Sand dunes can change location, form or dimensions depending on wind direction and strength. Sand dune movements can be effectively monitored through the comparison of multi-temporal satellite images. However, not all remote sensing platforms are suitable to study sand dunes. This study compares coarse (Landsat) and fine (Worldview) resolution platforms, specifically focussing on sand dunes within the Ubari Sand Sea (Libya). Sand dune features (crest line, dune ridge basal outlines) were extracted from Landsat and Worldview 2 imagery in order to construct geomorphic maps. These geomorphic maps were then compared using image overlay and differencing, and the Root Mean Squared Error (RMSE) was used to determine if the mapped dune patterns were significantly different. It was found that Landsat is a sufficient data source when studying dune patterns within a regional sand sea, but smaller dunes identified from Worldview data were not capable of being extracted in the data sourced from Landsat. This means that for studies concerned with the dune patterns and movements within sand seas, Landsat is sufficient. But in studies where the specific dynamics of specific dunes are required, a finer resolution is required; platforms such as Worldview are needed in order to gain more detailed insight and to link the past and present day climate and environmental change.

  11. Satellite data lift the veil on offshore platforms in the South China Sea

    Science.gov (United States)

    Liu, Yongxue; Sun, Chao; Sun, Jiaqi; Li, Hongyi; Zhan, Wenfeng; Yang, Yuhao; Zhang, Siyu

    2016-09-01

    Oil and gas exploration in the South China Sea (SCS) has garnered global attention recently; however, uncertainty regarding the accurate number of offshore platforms in the SCS, let alone their detailed spatial distribution and dynamic change, may lead to significant misjudgment of the true status of offshore hydrocarbon production in the region. Using both fresh and archived space-borne images with multiple resolutions, we enumerated the number, distribution, and annual rate of increase of offshore platforms across the SCS. Our results show that: (1) a total of 1082 platforms are present in the SCS, mainly located in shallow-water; and (2) offshore oil/gas exploitation in the SCS is increasing in intensity and advancing from shallow to deep water, and even to ultra-deep-water. Nevertheless, our findings suggest that oil and gas exploration in the SCS may have been over-estimated by one-third in previous reports. However, this overestimation does not imply any amelioration of the potential for future maritime disputes, since the rate of increase of platforms in disputed waters is twice that in undisputed waters.

  12. Deep and shallow structures in the Arctic region imaged by satellite magnetic and gravity data

    Science.gov (United States)

    Gaina, Carmen; Panet, Isabelle; Shephard, Grace

    2016-07-01

    The last decade has seen an increase in geoscientific data collection, which, together with available and older classified data made publicly available, is contributing to increasing our knowledge about Earth's structure and evolution. Despite this development, there are many gaps in data coverage in remote, hard-to-access regions. Satellite data have the advantage of acquiring measurements steadily and covering the entire globe. From a tectonics point of view, the specific heights of various satellites allow for the identification of moderate to large tectonic features, and can shed light on Earth's lower crust and lithosphere structure. In this contribution I discuss the use of magnetic and gravity models based on satellite data in deciphering the tectonic structure of remote areas. The present day Circum-Arctic region comprises a variety of tectonic settings: from active seafloor spreading in the North Atlantic and Eurasian Basin, and subduction in the North Pacific, to long-lived stable continental platforms in North America and Asia. A series of rifted margins, abandoned rifted areas and presumably extinct oceanic basins fringe these regions. Moreover, rifting- and seafloor spreading-related processes formed many continental splinters and terranes that were transported and docked at higher latitudes. Volcanic provinces of different ages have also been identified, from the Permian-Triassic Siberian traps at ca. 251 Ma to the (presumably) Cretaceous HALIP and smaller Cenozoic provinces in northern Greenland and the Barents Sea. We inspect global lithospheric magnetic data in order to identify the signature of the main volcanic provinces in the High Arctic. One of the most striking features in the Arctic domain is the strong magnetic anomaly close to the North Pole that correlates with a large, igneous oceanic plateau called the Alpha Mendeleev Ridge. The intensity and extent of the magnetic anomalies recorded by aircraft or satellites point towards a very thick

  13. Tethered Satellites as an Enabling Platform for Operational Space Weather Monitoring Systems

    Science.gov (United States)

    Gilchrist, Brian E.; Krause, Linda Habash; Gallagher, Dennis Lee; Bilen, Sven Gunnar; Fuhrhop, Keith; Hoegy, Walt R.; Inderesan, Rohini; Johnson, Charles; Owens, Jerry Keith; Powers, Joseph; Voronka, Nestor; Williams, Scott

    2013-01-01

    Tethered satellites offer the potential to be an important enabling technology to support operational space weather monitoring systems. Space weather "nowcasting" and forecasting models rely on assimilation of near-real-time (NRT) space environment data to provide warnings for storm events and deleterious effects on the global societal infrastructure. Typically, these models are initialized by a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g., via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative semi-empirical physics-based forward-prediction calculations. Many challenges are associated with the development of an operational system, from the top-level architecture (e.g., the required space weather observatories to meet the spatial and temporal requirements of these models) down to the individual instruments capable of making the NRT measurements. This study focuses on the latter challenge: we present some examples of how tethered satellites (from 100s of m to 20 km) are uniquely suited to address certain shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements are presented for two examples of space environment observables.

  14. Generation of Digital Surface Models from satellite photogrammetry: the DSM-OPT service of the ESA Geohazards Exploitation Platform (GEP)

    Science.gov (United States)

    Stumpf, André; Michéa, David; Malet, Jean-Philippe

    2017-04-01

    The continuously increasing fleet of agile stereo-capable very-high resolution (VHR) optical satellites has facilitated the acquisition of multi-view images of the earth surface. Theoretical revisit times have been reduced to less than one day and the highest spatial resolution which is commercially available amounts now to 30 cm/pixel. Digital Surface Models (DSM) and point clouds computed from such satellite stereo-acquisitions can provide valuable input for studies in geomorphology, tectonics, glaciology, hydrology and urban remote sensing The photogrammetric processing, however, still requires significant expertise, computational resources and costly commercial software. To enable a large Earth Science community (researcher and end-users) to process easily and rapidly VHR multi-view images, the work targets the implementation of a fully automatic satellite-photogrammetry pipeline (i.e DSM-OPT) on the ESA Geohazards Exploitation Platform (GEP). The implemented pipeline is based on the open-source photogrammetry library MicMac [1] and is designed for distributed processing on a cloud-based infrastructure. The service can be employed in pre-defined processing modes (i.e. urban, plain, hilly, and mountainous environments) or in an advanced processing mode (i.e. in which expert-users have the possibility to adapt the processing parameters to their specific applications). Four representative use cases are presented to illustrate the accuracy of the resulting surface models and ortho-images as well as the overall processing time. These use cases consisted of the construction of surface models from series of Pléiades images for four applications: urban analysis (Strasbourg, France), landslide detection in mountainous environments (South French Alps), co-seismic deformation in mountain environments (Central Italy earthquake sequence of 2016) and fault recognition for paleo-tectonic analysis (North-East India). Comparisons of the satellite-derived topography to airborne

  15. LOOS: an extensible platform for the structural analysis of simulations.

    Science.gov (United States)

    Romo, Tod D; Grossfield, Alan

    2009-01-01

    We have developed LOOS (Lightweight Object-Oriented Structure-analysis library) as an object-oriented library designed to facilitate the rapid development of tools for the structural analysis of simulations. LOOS supports the native file formats of most common simulation packages including AMBER, CHARMM, CNS, Gromacs, NAMD, Tinker, and X-PLOR. Encapsulation and polymorphism are used to simultaneously provide a stable interface to the programmer and make LOOS easily extensible. A rich atom selection language based on the C expression syntax is included as part of the library. LOOS enables students and casual programmer-scientists to rapidly write their own analytical tools in a compact and expressive manner resembling scripting. LOOS is written in C++ and makes extensive use of the Standard Template Library and Boost, and is freely available under the GNU General Public License (version 3) LOOS has been tested on Linux and MacOS X, but is written to be portable and should work on most Unix-based platforms.

  16. Tethered Satellites as Enabling Platforms for an Operational Space Weather Monitoring System

    Science.gov (United States)

    Krause, L. Habash; Gilchrist, B. E.; Bilen, S.; Owens, J.; Voronka, N.; Furhop, K.

    2013-01-01

    Space weather nowcasting and forecasting models require assimilation of near-real time (NRT) space environment data to improve the precision and accuracy of operational products. Typically, these models begin with a climatological model to provide "most probable distributions" of environmental parameters as a function of time and space. The process of NRT data assimilation gently pulls the climate model closer toward the observed state (e.g. via Kalman smoothing) for nowcasting, and forecasting is achieved through a set of iterative physics-based forward-prediction calculations. The issue of required space weather observatories to meet the spatial and temporal requirements of these models is a complex one, and we do not address that with this poster. Instead, we present some examples of how tethered satellites can be used to address the shortfalls in our ability to measure critical environmental parameters necessary to drive these space weather models. Examples include very long baseline electric field measurements, magnetized ionospheric conductivity measurements, and the ability to separate temporal from spatial irregularities in environmental parameters. Tethered satellite functional requirements will be presented for each space weather parameter considered in this study.

  17. Open Cherry Picker simulation results. [manned platform for satellite servicing from Shuttle

    Science.gov (United States)

    Nathan, C. A.

    1982-01-01

    The Open Cherry Picker (OCP) is a manned platform, mounted at the end of the Remote Manipulator System (RMS), which is used to enhance extravehicular activities. The objective of the simulation program described was to reduce the existing complexity of those OCP design features that are mandatory for initial Space Shuttle applications. The OCP development test article consists of a torque box, a rotating foot restraint, a rotating stanchion that houses handholds, and a tool storage section with an interface with payload modules. If the size or complexity of the payload increases, payload handling devices may be added at a later data. The simulations have shown that the crew can control the RMS from the Aft Flight Deck of the Shuttle, using voice commands from the EVA crewman. No need for a stabilizer was evident, and RMS dynamics due to crew-induced workloads were found to be minor.

  18. Advanced Deployable Shell-Based Composite Booms for Small Satellite Structural Applications Including Solar Sails

    Science.gov (United States)

    Fernandez, Juan M.

    2017-01-01

    State of the art deployable structures are mainly being designed for medium to large size satellites. The lack of reliable deployable structural systems for low cost, small volume, rideshare-class spacecraft severely constrains the potential for using small satellite platforms for affordable deep space science and exploration precursor missions that could be realized with solar sails. There is thus a need for reliable, lightweight, high packaging efficiency deployable booms that can serve as the supporting structure for a wide range of small satellite systems including solar sails for propulsion. The National Air and Space Administration (NASA) is currently investing in the development of a new class of advanced deployable shell-based composite booms to support future deep space small satellite missions using solar sails. The concepts are being designed to: meet the unique requirements of small satellites, maximize ground testability, permit the use of low-cost manufacturing processes that will benefit scalability, be scalable for use as elements of hierarchical structures (e.g. trusses), allow long duration storage, have high deployment reliability, and have controlled deployment behavior and predictable deployed dynamics. This paper will present the various rollable boom concepts that are being developed for 5-20 m class size deployable structures that include solar sails with the so-called High Strain Composites (HSC) materials. The deployable composite booms to be presented are being developed to expand the portfolio of available rollable booms for small satellites and maximize their length for a given packaged volume. Given that solar sails are a great example of volume and mass optimization, the booms were designed to comply with nominal solar sail system requirements for 6U CubeSats, which are a good compromise between those of smaller form factors (1U, 2U and 3U CubeSats) and larger ones (12 U and 27 U future CubeSats, and ESPA-class microsatellites). Solar

  19. STRUCTURAL PARAMETERS CALIBRATION BY POSTURE MEASUREMENT ON PARALLEL 6-DOF PLATFORM

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Some approaches to measure parallel 6-degree of freedom platform's posture statically and to calibrate theplatform's actual structural parameters by measuring a series of the platform's varying postures are studied. In the casewhere high posture accuracy is required reiatively, to obtain the platform's actual structural parameters is very important.Three dimensions measurement with 2 theodolites are used to obtain the platform's postures statically and Newton itera-tive method is adopted to calibrate structural parameters. Some measures taken in the measurement and the calibration arediscussed in detail. And the experiment results of the platform's posture control before and after the calibration are given.The results show that the platform's posture control accuracy after the calibration is improved notably.

  20. The calculation of satellite line structures in highly stripped plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Abdallah, J. Jr.; Kilcrease, D.P. [Los Alamos National Lab., NM (United States); Faenov, A.Ya.; Pikuz, T.A. [Multicharged Ion Spectra Data Center, Moscow (Russian Federation)

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Recently developed high-resolution x-ray spectrographs have made it possible to measure satellite structures from various plasma sources with great detail. These lines are weak optically thin lines caused by the decay of dielectronic states and generally accompany the resonance lines of H-like and He-like ions. The Los Alamos atomic physics and kinetics codes provide a unique capability for calculating the position and intensities of such lines. These programs have been used to interpret such highly resolved spectral measurements from pulsed power devices and laser produced plasmas. Some of these experiments were performed at the LANL Bright Source and Trident laser facilities. The satellite structures are compared with calculations to diagnose temperatures and densities. The effect of non-thermal electron distributions of electrons on calculated spectra was also considered. Collaborations with Russian scientists have added tremendous value to this research die to their vast experience in x-ray spectroscopy.

  1. e-Infrastuctures interoperability: the Geohazards Exploitation Platform for the use of satellite earth observations in Geosciences

    Science.gov (United States)

    Caumont, Herve; Brito, Fabrice; Mathot, Emmanuel; Barchetta, Francesco; Loeschau, Frank

    2015-04-01

    We present recent achievements with the Geohazards Exploitation Platform (GEP), a European contribution to the GEO SuperSites, and its interoperability with the MEDiterranean SUpersite Volcanoes (MED-SUV) e- infrastructure. The GEP is a catalyst for the use of satellite Earth observation missions, providing data to initiatives such as the GEO Geohazard Supersites and Natural Laboratories (GSNL), the Volcano and Seismic Hazards CEOS Pilots or the European Plate Observing System (EPOS). As satellite sensors are delivering increasing amounts of data, researchers need more computational science tools and services. The GEP contribution in this regard allows scientists to access different data types, relevant to the same area and phenomena and to directly stage selected inputs to scalable processing applications that deliver EO-based science products. With the GEP concept of operation for improved collaboration, a partner can bring its processing tools, use from his workspace other shared toolboxes and access large data repositories. GEP is based on Open Source Software components, on a Cloud Services architecture inheriting a range of ESA and EC funded innovations, and is associating the scientific community and SMEs in implementing new capabilities. Via MED-SUV, we are making discoverable and accessible a large number of products over the Mt. Etna, Vesu- vius/Campi Flegrei volcanic areas, which are of broader interest for Geosciences researchers, so they can process ENVISAT MERIS, ENVISAT ASAR, and ERS SAR data (both Level 1 and Level 2) hosted in the ESA clusters and in ESA's Virtual Archive, TerraSAR-X data hosted in DLR's Virtual Archive, as well as data hosted in other dedicated MED-SUV Virtual Archives (e.g. for LANDSAT, EOS-1). GEP will gradually access Sentinel-1A data, other space agencies data and value-added products. Processed products can also be published and archived on the MED-SUV e-Infrastructure. In this effort, data policy rules applied to the

  2. IMPROVEMENT OF THE SUPPORTING STRUCTURE OF PLATFORM CAR FOR HIGHER EFFICIENCY OF CONTAINER TRANSPORTATIONS

    Directory of Open Access Journals (Sweden)

    A. O. Lovska

    2017-02-01

    Full Text Available Purpose. The article is aimed to improve supporting structures of the platform car to increase the efficiency of container transportations. Methodology. In order to achieve the objective, the strength investigations of the universal platform car of the model 13-401 were conducted, strength reserves of the supporting elements were defined, and more optimal profiles of basic longitudinal beams of the frame in terms of the minimum material capacity were proposed. Decision correctness was confirmed by the strength calculation of the platform car supporting structure at basic loading operational modes and fatigue taking into account the research database of 107 cycles. It has been proposed to equip a platform car with swing fitting stops for fastening containers on the frame, which allows transportation of 20ft and 40ft containers. In order to improve container transportation efficiency along international transport corridors running through Ukraine, a platform car of articulated type has been designed on the base of the improved platform car structure. The mathematical simulation of dynamic loads of the platform car with containers (two 1CC containers at operational loading modes has been carried out, the maximum accelerations influencing the support structure have been defined, and their multiple values have been considered in computer simulation of the strength of the platform car of articulated type. Findings. The support structure of the platform car of articulated type on the basis of the standard platform car has been developed. Refined values of dynamic loads influencing supporting structure the platform car of articulated type with containers at operational loading modes have been obtained; the maximum equivalent stresses in the platform car support structure have been defined. Originality and practical value. A mathematical model of displacements for a platform car of articulated type with containers at operational loading modes of

  3. Seismic Response Control of Offshore Platform Structures with Shape Memory Alloy Dampers

    Institute of Scientific and Technical Information of China (English)

    LI Hong-nan; HE Xiao-yu; HUO Lin-sheng

    2005-01-01

    In this study, the seismic response control of offshore platform structures with Shape Memory Alloy (SMA) dampers is investigated. A new SMA damper and its restoring force model are introduced for the calculation of seismic response reduction. Based on an actual platform structure and its mechanical model, the parameters which may affect the rate of shock absorption are analyzed, such as the number, position and characteristics of the SMA dampers andthe condition of the site where the platform is located. The results show that the SMA damper is an effective control device for offshore platforms and satisfactory control can be achieved by proper selection of the parameters.

  4. Network platform for remote structural testing and shared use of laboratories

    Institute of Scientific and Technical Information of China (English)

    XIAO Yan; HU Qing; GUO Yurong; ZHU Pingsheng; YI Weijian

    2005-01-01

    This paper presents a network platform developed for remote testing of scaled model or prototype structures and structural elements. The network platform, NetSLab, was developed based on the client/server concept along with a proposed data model and the communication protocols. The platform is capable of transferring the control and feedback data as well as signals among remotely located structural testing laboratories or computers connected by Internet. Several concepts were introduced to develop the platform and to provide relatively easy and friendly interface for applications and further enhancement. Trial and actual tests were successfully carried out at the Hunan University, China and the University of Southern California, USA. Models simulating bridge piers and piles or building substructures were subjected to recorded earthquake ground motions, and the tests were controlled remotely over the Internet using the platform.

  5. Comparison of Dual-Channel Supply Chain Structures: E-Commerce Platform as Different Roles

    Directory of Open Access Journals (Sweden)

    Cong Wang

    2016-01-01

    Full Text Available E-commerce platforms can act as an e-tailer or a third-party intermediary that charge a commission and allow manufacturers to sell products on their platform directly. These two forms of dual-channel supply chain structures have different impacts on decisions and profits of manufacturers and traditional retailers. This paper establishes different Stackelberg game models for both dual-channel supply chain structures and achieves the equilibrium results. The results state that both structures can increase the consumer surplus and social welfare. More importantly, when the platform acts as an e-tailer, the manufacturer and the traditional retailer can form a “win-win” situation. Nevertheless, when the platform acts as a third-party intermediary allowing manufacturers to sell products on the platform directly, it is bound to harm the interests of the traditional retailer.

  6. Development of deployable structures for large space platforms. Volume 2: Design development

    Science.gov (United States)

    Greenberg, H. S.

    1983-01-01

    Design evolution, test article design, test article mass properties, and structural analysis of deployable platform systems are discussed. Orbit transfer vehicle (OTV) hangar development, OTV hangar concept selection, and manned module development are discussed. Deployable platform systems requirements, material data base, technology development needs, concept selection and deployable volume enclosures are also discussed.

  7. A 45 nm Low Cost, Radiation Hardened, Platform Based Structured ASIC Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed 45 nm radiation hardened platform based structured ASIC architecture offers the performance and density expected of a custom ASIC with the low...

  8. Development of deployable structures for large space platform systems, part 1

    Science.gov (United States)

    Cox, R. L.; Nelson, R. A.

    1982-01-01

    Eight deployable platform design objectives were established: autodeploy/retract; fully integrated utilities; configuration variability; versatile payload and subsystem interfaces; structural and packing efficiency; 1986 technology readiness; minimum EVA/RMS; and Shuttle operational compatibility.

  9. Finite Element Analysis for Satellite Structures Applications to Their Design, Manufacture and Testing

    CERN Document Server

    Abdelal, Gasser F; Gad, Ahmed H

    2013-01-01

    Designing satellite structures poses an ongoing challenge as the interaction between analysis, experimental testing, and manufacturing phases is underdeveloped. Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing explains the theoretical and practical knowledge needed to perform design of satellite structures. By layering detailed practical discussions with fully developed examples, Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing provides the missing link between theory and implementation.   Computational examples cover all the major aspects of advanced analysis; including modal analysis, harmonic analysis, mechanical and thermal fatigue analysis using finite element method. Test cases are included to support explanations an a range of different manufacturing simulation techniques are described from riveting to shot peening to material cutting. Mechanical design of a satellites structures are covered...

  10. Salinas - An implicit finite element structural dynamics code developed for massively parallel platforms

    Energy Technology Data Exchange (ETDEWEB)

    BHARDWAJ, MANLJ K.; REESE,GARTH M.; DRIESSEN,BRIAN; ALVIN,KENNETH F.; DAY,DAVID M.

    2000-04-06

    As computational needs for structural finite element analysis increase, a robust implicit structural dynamics code is needed which can handle millions of degrees of freedom in the model and produce results with quick turn around time. A parallel code is needed to avoid limitations of serial platforms. Salinas is an implicit structural dynamics code specifically designed for massively parallel platforms. It computes the structural response of very large complex structures and provides solutions faster than any existing serial machine. This paper gives a current status of Salinas and uses demonstration problems to show Salinas' performance.

  11. Proposed Use of the NASA Ames Nebula Cloud Computing Platform for Numerical Weather Prediction and the Distribution of High Resolution Satellite Imagery

    Science.gov (United States)

    Limaye, Ashutosh S.; Molthan, Andrew L.; Srikishen, Jayanthi

    2010-01-01

    The development of the Nebula Cloud Computing Platform at NASA Ames Research Center provides an open-source solution for the deployment of scalable computing and storage capabilities relevant to the execution of real-time weather forecasts and the distribution of high resolution satellite data to the operational weather community. Two projects at Marshall Space Flight Center may benefit from use of the Nebula system. The NASA Short-term Prediction Research and Transition (SPoRT) Center facilitates the use of unique NASA satellite data and research capabilities in the operational weather community by providing datasets relevant to numerical weather prediction, and satellite data sets useful in weather analysis. SERVIR provides satellite data products for decision support, emphasizing environmental threats such as wildfires, floods, landslides, and other hazards, with interests in numerical weather prediction in support of disaster response. The Weather Research and Forecast (WRF) model Environmental Modeling System (WRF-EMS) has been configured for Nebula cloud computing use via the creation of a disk image and deployment of repeated instances. Given the available infrastructure within Nebula and the "infrastructure as a service" concept, the system appears well-suited for the rapid deployment of additional forecast models over different domains, in response to real-time research applications or disaster response. Future investigations into Nebula capabilities will focus on the development of a web mapping server and load balancing configuration to support the distribution of high resolution satellite data sets to users within the National Weather Service and international partners of SERVIR.

  12. Structural analysis, design and evaluation of mock-up platform, monorail, and tank plate cut-out

    Energy Technology Data Exchange (ETDEWEB)

    Hundal, T.S.

    1995-12-19

    Platform - Structural analyses were performed for design seismic, live and dead load combinations for the freestanding platform over the partial DST mock-up section. The platform is to be used for Robotic ultrasonic inspection of the tank wall. It is a free standing structure anchored to floor slab with Hilti Kwik bolts.

  13. Investigation of tautomeric structures of thionin by satellite holes: matrix dependence

    Science.gov (United States)

    Weng, Kevin C.; Chiang, Chien-Chih; Cheng, Ji-Yen; Cheng, Shao-Ying; Personov, Roman I.; Chang, Ta-Chau

    1999-03-01

    We have applied the satellite hole spectroscopy to study the tautomeric structures of thionin dye in glycerol:water glass. Slightly different frequencies (˜15 cm -1) are observed for several satellite holes of thionin upon tuning the burning wavelength, implying that two conformational structures exist. However, only one set of satellite holes occurring in the spectrum of thionin doped in polyvinyl butyral film allows us to investigate the tautomeric structures of thionin in different matrices. Our results suggest that the appearance of two tautomeric structures of thionin in glycerol:water glass is due to the proton exchange between different sites of thionin and the matrix through intermolecular hydrogen bond.

  14. The design and analysis of the mechanical property test platform frame for marine structures

    Directory of Open Access Journals (Sweden)

    Wen-xian Tang

    2016-01-01

    Full Text Available In order to realize mechanical properties test of the emergency towing arrangements, anchor chain and other large marine components, a large-tonnage and multi-function horizontal tension test platform is put forward in this paper. The paper analyzes the disadvantages of the frame structure of the existing experimental platform and designs the composite structure of the concrete and steel. The steel has good elasticity and toughness, the concrete has good performance of high rigidity and compression resistance, so the composite structure takes the advantages of both. The sharp of the frame is like “L”, which can be used to testing different projects. The paper gives the detailed size and analysis procedure of the frame. And it finds a more reasonable structure by means of finite element to analyze and optimize. The frame structure has the advantages of low weight and cost. The platform has been installed in Zhoushan, China successfully.

  15. Multilevel Optimal Design of Prestressed Lightweight Concrete-Steel Platform Structures

    Institute of Scientific and Technical Information of China (English)

    王立成; 宋玉普; 康海贵; 王兴国

    2002-01-01

    The concrete-steel platform structure is rather complicated because it involves such materials as concrete, reinforcingbars, steel, and so on. If the traditional dimension optimization method is employed, the optimal design of the platform willmeet many handicaps, even it cannot be implemented at all. The multilevel optimal design approach is an efficient tool forthe solution of large-scale engineering structures. In this paper, this approach is applied to the optimal design of a concrete-steel platform, which is formulated as a system level optimal design problem and a set of uncoupled substructure level opti-mal design problems. The process of optimization is a process of iteration between system level and substructure level untilthe objective function converges. An illustrative example indicates that this method is effective in the optimal design of con-crete-steel platforms.

  16. Wind Turbine Controller to Mitigate Structural Loads on a Floating Wind Turbine Platform

    Energy Technology Data Exchange (ETDEWEB)

    Fleming, Paul A.; Peiffer, Antoine; Schlipf, David

    2016-06-24

    This paper summarizes the control design work that was performed to optimize the controller of a wind turbine on the WindFloat structure. The WindFloat is a semi-submersible floating platform designed to be a support structure for a multi-megawatt power-generating wind turbine. A controller developed for a bottom-fixed wind turbine configuration was modified for use when the turbine is mounted on the WindFloat platform. This results in an efficient platform heel resonance mitigation scheme. In addition several control modules, designed with a coupled linear model, were added to the fixed-bottom baseline controller. The approach was tested in a fully coupled nonlinear aero-hydroelastic simulation tool in which wind and wave disturbances were modeled. This testing yielded significant improvements in platform global performance and tower-base-bending loading.

  17. Impacts from Partial Removal of Decommissioned Oil and Gas Platforms on Fish Biomass and Production on the Remaining Platform Structure and Surrounding Shell Mounds.

    Directory of Open Access Journals (Sweden)

    Jeremy T Claisse

    Full Text Available When oil and gas platforms become obsolete they go through a decommissioning process. This may include partial removal (from the surface to 26 m depth or complete removal of the platform structure. While complete removal would likely eliminate most of the existing fish biomass and associated secondary production, we find that the potential impacts of partial removal would likely be limited on all but one platform off the coast of California. On average 80% of fish biomass and 86% of secondary fish production would be retained after partial removal, with above 90% retention expected for both metrics on many platforms. Partial removal would likely result in the loss of fish biomass and production for species typically found residing in the shallow portions of the platform structure. However, these fishes generally represent a small proportion of the fishes associated with these platforms. More characteristic of platform fauna are the primarily deeper-dwelling rockfishes (genus Sebastes. "Shell mounds" are biogenic reefs that surround some of these platforms resulting from an accumulation of mollusk shells that have fallen from the shallow areas of the platforms mostly above the depth of partial removal. We found that shell mounds are moderately productive fish habitats, similar to or greater than natural rocky reefs in the region at comparable depths. The complexity and areal extent of these biogenic habitats, and the associated fish biomass and production, will likely be reduced after either partial or complete platform removal. Habitat augmentation by placing the partially removed platform superstructure or some other additional habitat enrichment material (e.g., rock boulders on the seafloor adjacent to the base of partially removed platforms provides additional options to enhance fish production, potentially mitigating reductions in shell mound habitat.

  18. Deployable structure design for the science and applications space platform

    Science.gov (United States)

    Stoll, H. W.

    1980-01-01

    Basic concepts regarding deployable structures design, including systematic design/classification schemes and a deployability criterion, were proposed for use in synthesis, analysis and evaluation of alternative deployable structure designs. Using design guidelines based on SASP requirements and the basic concepts developed, a variety of designs were synthesized, and these along with previously proposed designs were analyzed and evaluated. Recommendations and conclusions regarding optimal deployable structure design were made.

  19. Fundamentals of the route theory for satellite constellation design for Earth discontinuous coverage. Part 4: Compound satellite structures on orbits with synchronized nodal regression

    Science.gov (United States)

    Razoumny, Yury N.

    2016-12-01

    Basing on the theory results considered in the previous papers of the series for traditional one-tiered constellation formed on the orbits with the same values of altitudes and inclinations for all the satellites of the constellation, the method for constellation design using compound satellite structures on orbits with different altitudes and inclinations and synchronized nodal regression is developed. Compound, multi-tiered, satellite structures (constellations) are based on orbits with different values of altitude and inclination providing nodal regression synchronization. It is shown that using compound satellite constellations for Earth periodic coverage makes it possible to sufficiently improve the Earth coverage, as compared to the traditional constellations based on the orbits with common altitude and inclination for all the satellites of the constellation, and, as a consequence, to get new opportunities for the satellite constellation design for different types of prospective space systems regarding increasing the quality of observations or minimization of the number of the satellites required.

  20. New Structural Representation and Digital-Analysis Platform for Symmetrical Parallel Mechanisms

    Directory of Open Access Journals (Sweden)

    Wenao Cao

    2013-05-01

    Full Text Available An automatic design platform capable of automatic structural analysis, structural synthesis and the application of parallel mechanisms will be a great aid in the conceptual design of mechanisms, though up to now such a platform has only existed as an idea. The work in this paper constitutes part of such a platform. Based on the screw theory and a new structural representation method proposed here which builds a one‐to‐one correspondence between the strings of representative characters and the kinematic structures of symmetrical parallel mechanisms (SPMs, this paper develops a fully‐automatic approach for mobility (degree‐of‐freedom analysis, and further establishes an automatic digital‐analysis platform for SPMs. With this platform, users simply have to enter the strings of representative characters, and the kinematic structures of the SPMs will be generated and displayed automatically, and the mobility and its properties will also be analysed and displayed automatically. Typical examples are provided to show the effectiveness of the approach.

  1. Integrated Orbit, Attitude, and Structural Control Systems Design for Space Solar Power Satellites

    Science.gov (United States)

    Wie, Bong; Roithmayr, Carlos M.

    2001-01-01

    The major objective of this study is to develop an integrated orbit, attitude, and structural control systems architecture for very large Space Solar Power Satellites (SSPS) in geosynchronous orbit. This study focuses on the 1.2-GW Abacus SSPS concept characterized by a 3.2 x 3.2 km solar-array platform, a 500-m diameter microwave beam transmitting antenna, and a 500 x 700 m earth-tracking reflector. For this baseline Abacus SSPS configuration, we derive and analyze a complete set of mathematical models, including external disturbances such as solar radiation pressure, microwave radiation, gravity-gradient torque, and other orbit perturbation effects. The proposed control systems architecture utilizes a minimum of 500 1-N electric thrusters to counter, simultaneously, the cyclic pitch gravity-gradient torque, the secular roll torque caused by an offset of the center-of-mass and center-of-pressure, the cyclic roll/yaw microwave radiation torque, and the solar radiation pressure force whose average value is about 60 N.

  2. Key technologies of thermal test for DFH-4 platform satellite%东四平台卫星热试验中的关键技术

    Institute of Scientific and Technical Information of China (English)

    袁伟峰; 郄殿福; 许忠旭

    2014-01-01

    东四平台系列卫星对真空热试验期间的星上转发器在轨工作状态模拟、星表高/低热流模拟、星体吊装与水平支撑和污染控制等提出了较高要求。文章对微波负载能量耗散试验技术、红外灯阵设计、液氮冷板设计、卫星吊装与支撑技术、污染控制及星内真空度监测技术等在该系列卫星热试验中的成功应用与完善进行了分析、总结。%In the thermal test for the DFH-4 platform satellite, high technical requirements have to be met for the on-orbit operating state simulation of the transponder, the high or low heat flux simulation for satellite’s surfaces, the satellite lifting and horizontal bracing, and the pollution control. This paper analyses the technologies for the energy dissipation of the microwave load, the design of the infrared lamp array, the design of the cold plate with liquid nitrogen, the satellite lifting and horizontal bracing, the vacuum degree monitoring inside the satellite and the contamination control, as well as the applications of above-mentioned technologies in test.

  3. Theory of satellite structures on spectral-line profiles.

    Science.gov (United States)

    Atakan, A. K.; Jacobson, H. C.

    1973-01-01

    A systematic comparison with experiment of various explanations for the problem of satellite-band formation on spectral-line profiles was initiated. The experiments were performed under a variety of conditions in an effort to construct a consistent model of entire line shapes. A composite theory is detailed which is the result of the insights of many individuals. The calculations indicate that the main features of the problem, the line, the high-intensity red satellites, and the blue satellite can be described simultaneously. The results also indicate that widely different potentials can lead to very similar line profiles. Ancillary conclusions are presented concerning the role of Lennard-Jones potentials in line-shape calculations.

  4. INMARSAT - The International Maritime Satellite Organization: Origins and structure

    Science.gov (United States)

    Doyle, S. E.

    1977-01-01

    The third session of the International Conference on the Establishment of an International Maritime Satellite System established the International Maritime Satellite Organization (INMARSAT) in 1976. Its main functions are to improve maritime communications via satellite, thereby facilitating more efficient emergency communications, ship management, and maritime public correspondence services. INMARSAT's aims are similar to those of the Intergovernmental Maritime Consultative Organization (IMCO), the main United Nations organization dealing with maritime affairs. The specific functions of INMARSAT have been established by an Intersessional Working Group (IWG) which met three times between general conference meetings. Initial investment shares for the creation of INMARSAT were shared by the United States (17%), the United Kingdom (12%), the U.S.S.R. (11%), Norway (9.50%), Japan (8.45%), Italy (4.37%), and France (3.50%).

  5. Rapid Manufacturing of Reconfigurable Satellite Panels with Embedded Electronics, Embedded Thermal Devices, and Novel Structural Features

    OpenAIRE

    Young, Quinn; Stucker, Brent

    2006-01-01

    The Center for Advanced Satellite Manufacturing (CASM) at Utah State University has been investigating the use of new, advanced manufacturing technologies for the rapid manufacture of highly capable satellite panels. Using Ultrasonic Consolidation it is now possible to additively manufacture (a.k.a. rapid prototype) aluminum structures with embedded electronics, thermal devices, internal structural features, and fibers. CASM has built and tested embedded USB networks, electronic devices, ther...

  6. Clarification on Polarity of Bipolar Electric Field Solitary Structures in Space Plasmas with Satellite Observation

    Institute of Scientific and Technical Information of China (English)

    M. N. S.Qureshi; SHI Jian-Kui; LIU Zhen-Xing; Klaus Torkar

    2011-01-01

    The bipolar electric field solitary (EFS) structures observed frequently in space plasmas by satellites have two different polarities, first positive electric field peak then negative (i.e., positive/negative) and first negative then positive peak (i.e., negative/positive). We provide the physical explanation on the polarity of observed bipolar EFS structures with an electrostatic ion fluid model. The results show that ii initial electric field E0 > 0, the polarity of the bipolar EFS structure will be positive/negative; and if E0 < 0, the polarity of the bipolar EFS structure will be negative/positive. However, for a fixed polarity of the EFS, either positive/negative or negative/positive, if the satellite is located at the positive side of the EFS, the observed polarity should be positive/negative, if the satellite is located at the negative side of the EFS, the observed polarity should be negative/positive. Therefore, we provide a method to clarify the natural polarity of the EFS with observed polarity by satellites. Our results are significant to understand the physical process in space plasma with the satellite observation.%@@ The bipolar electric field solitary (EFS) structures observed frequently in space plasmas by satellites have two different polarities, first positive electric Held peak then negative (i.e., positive/negative) and first negative then positive peak (i.e., negative/positive).We provide the physical explanation on the polarity of observed bipolar EFS structures with an electrostatic ion fluid model.

  7. History of Satellite TV Broadcasting and Satellite Broadcasting Market in Turkey

    Directory of Open Access Journals (Sweden)

    Mihalis KUYUCU

    2015-09-01

    Full Text Available The present study analyses the satellite broadcasting that is the first important development that emerged as a result of digitalization in communication technologies and its reflections in Turkey. As the first milestone in the globalization of television broadcasting, satellite broadcasting provided substantial contribution towards the development of the media. Satellite bro adcasting both increased the broadcasting quality and geographical coverage of the television media. A conceptual study was carried out in the first part of the study in connection with the history of satellite broadcasting in Turkey and across the world. In the research part of the study, an analysis was performed on 160 television channels that broadcast in Turkey via Turksat Satellite. Economic structure of the television channels broadcasting in Turkey via satellite was studied and an analysis was perfo rmed on the operational structure of the channels. As a result of the study, it was emphasized that the television channels broadcasting via satellite platform also use other platforms for the purpose of spreading their broadcasts and television channel ow ners make investments in different branches of the media, too. Capital owners invest in different business areas other than the media although television channels broadcasting via Turksat mostly focus on thematic broadcasting and make effort to generate ec onomic income from advertisements. Delays are encountered in the course of the convergence between the new media and television channels that broadcast only from the satellite platform and such television channels experience more economic problems than the other channels. New media and many TV broadcasting platforms emerged as a result of the developments in the communication technologies. In television broadcasting, satellite platform is not an effective platform on its own. Channels make effort to reach t o more people by using other platforms in addition to

  8. Soil-Structure Interaction Analysis of Jack-up Platforms Subjected to Monochrome and Irregular Waves

    Institute of Scientific and Technical Information of China (English)

    Maziar Gholami KORZANI; Ali Akbar AGHAKOUCHAK

    2015-01-01

    As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudcan performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation (BNWF) modeling—which is based on using nonlinear springs and dampers instead of a continuum soil media—is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan (such as uplifting and rocking), and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudcans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction (SSI), moment-rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil-foundation interface.

  9. THE SATELLITE STRUCTURE TOPOLOGY OPTIMIZATION BASED ON HOMOGENIZATION METHOD AND ITS SIZE SENSITIVITY ANALYSIS

    Institute of Scientific and Technical Information of China (English)

    ChenChangya; PanJin; WangDeyu

    2005-01-01

    With the development of satellite structure technology, more and more design parameters will affect its structural performance. It is desirable to obtain an optimal structure design with a minimum weight, including optimal configuration and sizes. The present paper aims to describe an optimization analysis for a satellite structure, including topology optimization and size optimization. Based on the homogenization method, the topology optimization is carried out for the main supporting frame of service module under given constraints and load conditions, and then the sensitivity analysis is made of 15 structural size parameters of the whole satellite and the optimal sizes are obtained. The numerical result shows that the present optimization design method is very effective.

  10. Structural evaluation of W-211 flexible receiver platforms and tank pit walls

    Energy Technology Data Exchange (ETDEWEB)

    Shrivastava, H.P.

    1997-11-03

    This document is a structural analysis of the Flexible Receiver Platforms and the tank-pit wall during removal of equipment and during a accidental drop of that equipment. The platform and the pit walls must withstand a accidental drop of a mixer and transfer pumps in specific pits in tanks 102-AP and 104-AP. A mixer pump will be removed from riser 11 in pit 2A on tank 241-AP-102. A transfer pump will be removed from riser 13 in pit 2D on tank 241-AP-102 and another transfer pump will be removed from riser 3A in pit 4A on tank 241-AP-104.

  11. Terrestrial kilometric radiation: 1: Spatial structures studies. [from satellite observation (Explorer 2 satellite) of lunar occultation

    Science.gov (United States)

    Alexander, J. K.; Kaiser, M. L.

    1976-01-01

    Observations are presented of lunar occultations of the earth at 250 kHz obtained with the Radio-Astronomy-Explorer-2 satellite which were used to derive two dimensional maps of the location of the sources of terrestrial kilometric radiation (TKR). By examining the two dimensional source distributions as a function of the observer's location (lunar orbit) with respect to the magnetosphere, the average three dimensional location of the emission regions can be estimated. Although TKR events at 250 kHz can often be observed at projected distances corresponding to the 250 kHz electron gyro or plasma level (approximately 2 earth radii), many events are observed much farther from the earth (between 5 and 15 earth radii). Dayside emission apparently in the region of the polar cusp and the magnetosheath and night emission associated with regions of the magnetotail are examined. The nightside emission is suggestive of a mechanism involving plasma sheet electron precipitation in the pre-midnight sector.

  12. STRUCTURE OF THE SPANISH SYSTEM OF SATELLITE OF COMMUNICATIONS

    Directory of Open Access Journals (Sweden)

    F. Sacristán - Romero

    2007-04-01

    Full Text Available The objectives of satellites HISPASAT are oriented towards the search to satisfy necessities derived from the transport of television and radio signals. It tries the supplying of a basic and safe support of communications for the defence and security of the national territory, the creation of an infrastructure of channels for official networks, routes of data, restoration of connections, rural telephony. Also is wanted to foment the provision of television channels for the Hispanic community in the south and center of America and the broadcasting of services of television for people in general.

  13. ViVar: a comprehensive platform for the analysis and visualization of structural genomic variation.

    Science.gov (United States)

    Sante, Tom; Vergult, Sarah; Volders, Pieter-Jan; Kloosterman, Wigard P; Trooskens, Geert; De Preter, Katleen; Dheedene, Annelies; Speleman, Frank; De Meyer, Tim; Menten, Björn

    2014-01-01

    Structural genomic variations play an important role in human disease and phenotypic diversity. With the rise of high-throughput sequencing tools, mate-pair/paired-end/single-read sequencing has become an important technique for the detection and exploration of structural variation. Several analysis tools exist to handle different parts and aspects of such sequencing based structural variation analyses pipelines. A comprehensive analysis platform to handle all steps, from processing the sequencing data, to the discovery and visualization of structural variants, is missing. The ViVar platform is built to handle the discovery of structural variants, from Depth Of Coverage analysis, aberrant read pair clustering to split read analysis. ViVar provides you with powerful visualization options, enables easy reporting of results and better usability and data management. The platform facilitates the processing, analysis and visualization, of structural variation based on massive parallel sequencing data, enabling the rapid identification of disease loci or genes. ViVar allows you to scale your analysis with your work load over multiple (cloud) servers, has user access control to keep your data safe and is easy expandable as analysis techniques advance. URL: https://www.cmgg.be/vivar/

  14. ViVar: a comprehensive platform for the analysis and visualization of structural genomic variation.

    Directory of Open Access Journals (Sweden)

    Tom Sante

    Full Text Available Structural genomic variations play an important role in human disease and phenotypic diversity. With the rise of high-throughput sequencing tools, mate-pair/paired-end/single-read sequencing has become an important technique for the detection and exploration of structural variation. Several analysis tools exist to handle different parts and aspects of such sequencing based structural variation analyses pipelines. A comprehensive analysis platform to handle all steps, from processing the sequencing data, to the discovery and visualization of structural variants, is missing. The ViVar platform is built to handle the discovery of structural variants, from Depth Of Coverage analysis, aberrant read pair clustering to split read analysis. ViVar provides you with powerful visualization options, enables easy reporting of results and better usability and data management. The platform facilitates the processing, analysis and visualization, of structural variation based on massive parallel sequencing data, enabling the rapid identification of disease loci or genes. ViVar allows you to scale your analysis with your work load over multiple (cloud servers, has user access control to keep your data safe and is easy expandable as analysis techniques advance. URL: https://www.cmgg.be/vivar/

  15. Internetworking PCN and ISDN in a satellite environment - Alternate rate structures

    Science.gov (United States)

    Murthy, K. M. S.

    1992-03-01

    Wide area personal communication services (PCS) can be provided using hybrid networks (PCN + satellite) in the near future. This paper deals with internetworking issues related to PCNs and wide area networks such as public switched telephone network, integrated services digital network and satellites operating in a cascaded channel, hybrid network environment. From capacity, cost and quality points of view lower bit rate (LBR) voice codecs will become very attractive in PCS environment in the future. Rate structure modifications to presently defined PCN and ISDN standards are proposed. Both fixed and mobile satellite networks can take full advantage of the revised LBR rate structure. How the currently defined rate structures and proposed LBR rate structures can coexist as a heterogeneous resource pool are discussed.

  16. The deep structures of the junction of the Urals with the Russian and West Siberian Platforms

    Science.gov (United States)

    Ivanov, K. S.; Koroteev, V. A.; Kostrov, N. P.

    2017-07-01

    A new model of the junction of the Ural fold belt with the Russian and West Siberian Platforms along the Europrobe Seismic Reflection profiling in the Urals (ESRU) down to a depth of 15 km is constructed. 2Dmodeling of the density and magnetic properties was performed using seven profiles and was accompanied by an estimate of applicability of the method. In the west, the upper part of the model is represented by terrigeneous- carbonate deposits, and the bottom part shows the structures of the basement of the Russian platform, which becomes thinner eastward and plunges beneath the Ural structures. The most significant difference in the West Siberian part of the transect is the great "length" of the entire structure of the Earth's crust. This is caused by the Early Triassic extension accompanied by the formation of a system of Triassic graben-rifts.

  17. THE BENEFITS AND CHALLENGES OF HAVING AN OPEN AND FREE BASIS SATELLITE DATA SHARING PLATFORM IN TURKEY: GEZGİN

    Directory of Open Access Journals (Sweden)

    H. S. Deveci

    2016-06-01

    Full Text Available Turkey is a county that experiences rapid socioeconomic development, which, in turn, leads to high urbanization rates due to migration of people from rural to urban areas, many large-scale development projects (e.g. highways, dams, housing and infrastructure, and environmental problems that adversely affect agriculture, such as soil erosion and deforestation. Furthermore, Turkey lies in a region prone to natural disasters, especially earthquakes, landslides, flooding and forest fires. Successfully overcoming these challenges requires continuous monitoring to enable rapid response as well as the development of effective socioeconomic policies. In this regard, space-based earth observation (EO systems play a critical role in the rapid acquisiton and extraction of crucial information. The first launch of the first Turkish-designed satellite, RASAT, in 2011 led to the wide-spread exploitation of space-based resources by Turkish institutions through the dissemination of EO data on an open and free basis via the GEZGIN internet portal (http://www.gezgin.gov.tr. The push for data sharing was further instigated by the nationally funded project GEOPORTAL (“Satellite Image Processing and Geoportal Development Project” and European Union FP7 project EOPOWER (“Earth Observation for Economic Empowerment”, which strove to create conditions for sustainable economic development through the increased use of Earth observation products and services for environmental applications. In this work, the technical challenges involving processing and preparing raw satellite data for dissemination as well as software design of the GEZGIN Portal will be presented.

  18. Smoke Dispersion Modeling Over Complex Terrain Using High-Resolution Meteorological Data and Satellite Observations: The FireHub Platform

    Science.gov (United States)

    Solomos, S.; Amiridis, V.; Zanis, P.; Gerasopoulos, E.; Sofiou, F. I.; Herekakis, T.; Brioude, J.; Stohl, A.; Kahn, R. A.; Kontoes, C.

    2015-01-01

    A total number of 20,212 fire hot spots were recorded by the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument over Greece during the period 2002e2013. The Fire Radiative Power (FRP) of these events ranged from 10 up to 6000 MW at 1 km resolution, and many of these fire episodes resulted in long-range transport of smoke over distances up to several hundred kilometers. Three different smoke episodes over Greece are analyzed here using real time hot-spot observations from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) satellite instrument as well as from MODIS hot-spots. Simulations of smoke dispersion are performed with the FLEXPART-WRF model and particulate matter emissions are calculated directly from the observed FRP. The modeled smoke plumes are compared with smoke stereo-heights from the Multiangle Imaging Spectroradiometer (MISR) instrument and the sensitivities to atmospheric and modeling parameters are examined. Driving the simulations with high resolution meteorology (4 4 km) and using geostationary satellite data to identify the hot spots allows the description of local scale features that govern smoke dispersion. The long-range transport of smoke is found to be favored over the complex coastline environment of Greece due to the abrupt changes between land and marine planetary boundary layers (PBL) and the decoupling of smoke layers from the surface.

  19. The Benefits and Challenges of Having AN Open and Free Basis Satellite Data Sharing Platform in Turkey: GEZGİN

    Science.gov (United States)

    Seda Deveci, Hüsne; Koru, Aziz; Sakarya, Ufuk; Tevrizoğlu, İsmail; Teke, Mustafa; Küpçü, Ramazan; Avenoğlu, Bülent; Demirkesen, Can; Zübeyde Gürbüz, Sevgi; Feray Öztoprak, A.; Açıkgöz, İbrahim Serdar; Hakkı Demirhan, İsmail; Ömer Kozal, Ali; Efendioğlu, Mehmet; Berke, Erdinç; Fehmi Şimşek, F.; Atıl, İlkay; Kaya, Derya; Uçmak, Pınar; Ersöz, Eda; Özen, Hilal

    2016-06-01

    Turkey is a county that experiences rapid socioeconomic development, which, in turn, leads to high urbanization rates due to migration of people from rural to urban areas, many large-scale development projects (e.g. highways, dams, housing and infrastructure), and environmental problems that adversely affect agriculture, such as soil erosion and deforestation. Furthermore, Turkey lies in a region prone to natural disasters, especially earthquakes, landslides, flooding and forest fires. Successfully overcoming these challenges requires continuous monitoring to enable rapid response as well as the development of effective socioeconomic policies. In this regard, space-based earth observation (EO) systems play a critical role in the rapid acquisiton and extraction of crucial information. The first launch of the first Turkish-designed satellite, RASAT, in 2011 led to the wide-spread exploitation of space-based resources by Turkish institutions through the dissemination of EO data on an open and free basis via the GEZGIN internet portal (http://www.gezgin.gov.tr). The push for data sharing was further instigated by the nationally funded project GEOPORTAL ("Satellite Image Processing and Geoportal Development Project") and European Union FP7 project EOPOWER ("Earth Observation for Economic Empowerment"), which strove to create conditions for sustainable economic development through the increased use of Earth observation products and services for environmental applications. In this work, the technical challenges involving processing and preparing raw satellite data for dissemination as well as software design of the GEZGIN Portal will be presented.

  20. Smoke dispersion modeling over complex terrain using high resolution meteorological data and satellite observations - The FireHub platform

    Science.gov (United States)

    Solomos, S.; Amiridis, V.; Zanis, P.; Gerasopoulos, E.; Sofiou, F. I.; Herekakis, T.; Brioude, J.; Stohl, A.; Kahn, R. A.; Kontoes, C.

    2015-10-01

    A total number of 20,212 fire hot spots were recorded by the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument over Greece during the period 2002-2013. The Fire Radiative Power (FRP) of these events ranged from 10 up to 6000 MW at 1 km resolution, and many of these fire episodes resulted in long-range transport of smoke over distances up to several hundred kilometers. Three different smoke episodes over Greece are analyzed here using real time hot-spot observations from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) satellite instrument as well as from MODIS hot-spots. Simulations of smoke dispersion are performed with the FLEXPART-WRF model and particulate matter emissions are calculated directly from the observed FRP. The modeled smoke plumes are compared with smoke stereo-heights from the Multiangle Imaging Spectroradiometer (MISR) instrument and the sensitivities to atmospheric and modeling parameters are examined. Driving the simulations with high resolution meteorology (4 × 4 km) and using geostationary satellite data to identify the hot spots allows the description of local scale features that govern smoke dispersion. The long-range transport of smoke is found to be favored over the complex coastline environment of Greece due to the abrupt changes between land and marine planetary boundary layers (PBL) and the decoupling of smoke layers from the surface.

  1. Smoke Dispersion Modeling Over Complex Terrain Using High-Resolution Meteorological Data and Satellite Observations: The FireHub Platform

    Science.gov (United States)

    Solomos, S.; Amiridis, V.; Zanis, P.; Gerasopoulos, E.; Sofiou, F. I.; Herekakis, T.; Brioude, J.; Stohl, A.; Kahn, R. A.; Kontoes, C.

    2015-01-01

    A total number of 20,212 fire hot spots were recorded by the Moderate Resolution Imaging Spectroradiometer (MODIS) satellite instrument over Greece during the period 2002e2013. The Fire Radiative Power (FRP) of these events ranged from 10 up to 6000 MW at 1 km resolution, and many of these fire episodes resulted in long-range transport of smoke over distances up to several hundred kilometers. Three different smoke episodes over Greece are analyzed here using real time hot-spot observations from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) satellite instrument as well as from MODIS hot-spots. Simulations of smoke dispersion are performed with the FLEXPART-WRF model and particulate matter emissions are calculated directly from the observed FRP. The modeled smoke plumes are compared with smoke stereo-heights from the Multiangle Imaging Spectroradiometer (MISR) instrument and the sensitivities to atmospheric and modeling parameters are examined. Driving the simulations with high resolution meteorology (4 4 km) and using geostationary satellite data to identify the hot spots allows the description of local scale features that govern smoke dispersion. The long-range transport of smoke is found to be favored over the complex coastline environment of Greece due to the abrupt changes between land and marine planetary boundary layers (PBL) and the decoupling of smoke layers from the surface.

  2. Core-satellite ZnS-Ag nanoassemblies: Synthesis, structure, and optical properties.

    Science.gov (United States)

    Rohani, Parham; Sharma, Munish K; Swihart, Mark T

    2016-02-01

    We synthesized hollow core-satellite nanoassemblies comprised of hollow zinc sulfide (ZnS) shells decorated with silver nanoparticles (Ag NPs). This was achieved by solution-phase attachment of Ag NPs to hollow ZnS nanospheres (NSs) prepared by spray pyrolysis. This produces an aqueous dispersion of ZnS-Ag hybrid structures, 50-500nm in overall diameter. We characterized the nanostructures by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and energy dispersive X-ray spectroscopy (EDX) to elucidate the ZnS (core)-Ag (satellite) morphology and optimize conditions for producing such structures. Optical spectroscopy showed that photoluminescence of ZnS was quenched by Ag while absorbance was enhanced. This work provides a simple and general means of producing hollow core-satellite structures that could be of broad applicability.

  3. Dynamic Analysis of Tension Leg Platform for Offshore Wind Turbine Support as Fluid-Structure Interaction

    Institute of Scientific and Technical Information of China (English)

    HUANG Hu; ZHANG She-rong

    2011-01-01

    Tension leg platform(TLP)for offshore wind turbine support is a new type structure in wind energy utilization.The strong-interaction method is used in analyzing the coupled model,and the dynamic characteristics of the TLP for offshore wind turbine support are recognized.As shown by the calculated results:for the lower modes,the shapes are water's vibration,and the vibration of water induces the structure's swing;the mode shapes of the structure are complex,and can largely change among different members;the mode shapes of the platform are related to the tower's.The frequencies of the structure do not change much after adjusting the length of the tension cables and the depth of the platform;the TLP has good adaptability for the water depths and the environment loads.The change of the size and parameters of TLP can improve the dynamic characteristics,which can reduce the vibration of the TLP caused by the loads.Through the vibration analysis,the natural vibration frequencies of TLP can be distinguished from the frequencies of condition loads,and thus the resonance vibration can be avoided,therefore the offshore wind turbine can work normally in the complex conditions.

  4. Minimization of outage probability of WiMAX link supported by laser link between a high-altitude platform and a satellite.

    Science.gov (United States)

    Arnon, Shlomi

    2009-07-01

    Various technologies for the implementation of a WiMAX (IEEE802.16) base station on board a high-altitude platform (HAP) are currently being researched. The network configuration under consideration includes a satellite, several HAPs, and subscribers on the ground. The WiMAX base station is positioned on the satellite and connects with the HAP via an analog RF over-laser communication (LC) link. The HAPs house a transparent transponder that converts the optic signal to a WiMAX RF signal and the reverse. The LC system consists of a laser transmitter and an optical receiver that need to be strictly aligned to achieve a line-of-sight link. However, mechanical vibration and electronic noise in the control system challenge the transmitter-receiver alignment and cause pointing errors. The outcome of pointing errors is fading of the received signal, which leads to impaired link performance. In this paper, we derive the value of laser transmitter gain that can minimize the outage probability of the WiMAX link. The results indicate that the optimum value of the laser transmitter gain is not a function of the pointing error statistics.

  5. Zero-index structures as an alternative platform for quantum optics.

    Science.gov (United States)

    Liberal, Iñigo; Engheta, Nader

    2017-01-31

    Vacuum fluctuations are one of the most distinctive aspects of quantum optics, being the trigger of multiple nonclassical phenomena. Thus, platforms like resonant cavities and photonic crystals that enable the inhibition and manipulation of vacuum fluctuations have been key to our ability to control light-matter interactions (e.g., the decay of quantum emitters). Here, we theoretically demonstrate that vacuum fluctuations may be naturally inhibited within bodies immersed in epsilon-and-mu-near-zero (EMNZ) media, while they can also be selectively excited via bound eigenmodes. Therefore, zero-index structures are proposed as an alternative platform to manipulate the decay of quantum emitters, possibly leading to the exploration of qualitatively different dynamics. For example, a direct modulation of the vacuum Rabi frequency is obtained by deforming the EMNZ region without detuning a bound eigenmode. Ideas for the possible implementation of these concepts using synthetic implementations based on structural dispersion are also proposed.

  6. Advancements of in-flight mass moment of inertia and structural deflection algorithms for satellite attitude simulators

    Science.gov (United States)

    Wright, Jonathan W.

    Experimental satellite attitude simulators have long been used to test and analyze control algorithms in order to drive down risk before implementation on an operational satellite. Ideally, the dynamic response of a terrestrial-based experimental satellite attitude simulator would be similar to that of an on-orbit satellite. Unfortunately, gravitational disturbance torques and poorly characterized moments of inertia introduce uncertainty into the system dynamics leading to questionable attitude control algorithm experimental results. This research consists of three distinct, but related contributions to the field of developing robust satellite attitude simulators. In the first part of this research, existing approaches to estimate mass moments and products of inertia are evaluated followed by a proposition and evaluation of a new approach that increases both the accuracy and precision of these estimates using typical on-board satellite sensors. Next, in order to better simulate the micro-torque environment of space, a new approach to mass balancing satellite attitude simulator is presented, experimentally evaluated, and verified. Finally, in the third area of research, we capitalize on the platform improvements to analyze a control moment gyroscope (CMG) singularity avoidance steering law. Several successful experiments were conducted with the CMG array at near-singular configurations. An evaluation process was implemented to verify that the platform remained near the desired test momentum, showing that the first two components of this research were effective in allowing us to conduct singularity avoidance experiments in a representative space-like test environment.

  7. Offshore energy structures for wind power, wave energy and hybrid marine platforms

    CERN Document Server

    Karimirad, Madjid

    2014-01-01

    This book provides all the key information needed to design offshore structures for renewable energy applications successfully. Suitable for practicing engineers and students, the author conveys design principles and best practices in a clear, concise manner, focusing on underlying physics while eschewing complicated mathematical detail. The text connects underlying scientific theory with industry standards and practical implementation issues for offshore wind turbines, wave energy converters and current turbines. Combined concepts such as wave-wind energy platforms are discussed, as well. Cov

  8. Modal Strain Energy Based Structural Damage Localization for Offshore Platform using Simulated and Measured Data

    Institute of Scientific and Technical Information of China (English)

    WANG Shuqing; LIU Fushun; ZHANG Min

    2014-01-01

    Modal strain energy based methods for damage detection have received much attention. However, most of published articles use numerical methods and some studies conduct modal tests with simple 1D or 2D structures to verify the damage detection algorithms. Only a few studies utilize modal testing data from 3D frame structures. Few studies conduct performance comparisons between two different modal strain energy based methods. The objective of this paper is to investigate and compare the effectiveness of a traditional modal strain energy method (Stubbs index) and a recently developed modal strain energy decomposition (MSED) method for damage localization, for such a purpose both simulated and measured data from an offshore platform model being used. Particularly, the mode shapes used in the damage localization are identified and synthesized from only two measurements of one damage scenario because of the limited number of sensors. The two methods were first briefly reviewed. Next, using a 3D offshore platform model, the damage detection algorithms were implemented with different levels of damage severities for both single damage and multiple damage cases. Finally, a physical model of an offshore steel platform was constructed for modal testing and for validat-ing the applicability. Results indicate that the MSED method outperforms the Stubbs index method for structural damage detection.

  9. Internet of Things (IoT Platform for Structure Health Monitoring

    Directory of Open Access Journals (Sweden)

    Ahmed Abdelgawad

    2017-01-01

    Full Text Available Increase in the demand for reliable structural health information led to the development of Structural Health Monitoring (SHM. Prediction of upcoming accidents and estimation of useful life span of a structure are facilitated through SHM. While data sensing is the core of any SHM, tracking the data anytime anywhere is a prevailing challenge. With the advancement in information technology, the concept of Internet of Things (IoT has made it possible to integrate SHM with Internet to track data anytime anywhere. In this paper, a SHM platform embedded with IoT is proposed to detect the size and location of damage in structures. The proposed platform consists of a Wi-Fi module, a Raspberry Pi, an Analog to Digital Converter (ADC, a Digital to Analog Converter (DAC, a buffer, and piezoelectric (PZT sensors. The piezoelectric sensors are mounted as a pair in the structure. Data collected from the piezoelectric sensors will be used to detect the size and location of damage using a proposed mathematical model. Implemented on a Raspberry Pi, the proposed mathematical model will estimate the size and location of structural damage, if any, and upload the data to Internet. This data will be stored and can be checked remotely from any mobile device. The system has been validated using a real test bed in the lab.

  10. BILL-E: Robotic Platform for Locomotion and Manipulation of Lightweight Space Structures

    Science.gov (United States)

    Jenett, Benjamin; Cheung, Kenneth

    2017-01-01

    We describe a robotic platform for traversing and manipulating a modular 3D lattice structure. The robot is designed to operate within a specifically structured environment, which enables low numbers of degrees of freedom (DOF) compared to robots performing comparable tasks in an unstructured environment. This allows for simple controls, as well as low mass and cost. This approach, designing the robot relative to the local environment in which it operates, results in a type of robot we call a "relative robot." We describe a bipedal robot that can locomote across a periodic lattice structure, as well as being able to handle, manipulate, and transport building block parts that compose the lattice structure. Based on a general inchworm design, the robot has added functionality for traveling over and operating on a host structure.

  11. Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

    Institute of Scientific and Technical Information of China (English)

    陈守煜; 伏广涛; 王建明; 刘刚

    2001-01-01

    In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi-structural decision-making. Different from traditional methods in semi-structural decision-making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix.Finally, a multi-hierarchy fuzzy optimum model is adopted to select the satisfying offshore platform alternative. A case study shows that the new framework and methodology are scientific, reasonable and easy to use in practice.

  12. Miniature and low cost fiber bragg grating interrogator for structural monitoring in nano-satellites

    NARCIS (Netherlands)

    Toet, P.M.; Hagen, R.A.J.; Hakkesteegt, H.C.; Lugtenburg, J.; Maniscalco, M.P.

    2014-01-01

    In this paper we present a newly developed Fiber Optic measurement system, consisting of Fiber Bragg Grating (FBG) sensors and an FBG interrogator. The development of the measuring system is part of the PiezoElectric Assisted Smart Satellite Structure (PEASSS) project, which was initiated at the beg

  13. Window into the Caledonian orogen: Structure of the crust beneath the East Shetland platform, United Kingdom

    Science.gov (United States)

    McBride, J.H.; England, R.W.

    1999-01-01

    Reprocessing and interpretation of commercial and deep seismic reflection data across the East Shetland platform and its North Sea margin provide a new view of crustal subbasement structure beneath a poorly known region of the British Caledonian orogen. The East Shetland platform, east of the Great Glen strike-slip fault system, is one of the few areas of the offshore British Caledonides that remained relatively insulated from the Mesozoic and later rifting that involved much of the area around the British Isles, thus providing an "acoustic window" into the deep structure of the orogen. Interpretation of the reflection data suggests that the crust beneath the platform retains a significant amount of its original Caledonian and older architecture. The upper to middle crust is typically poorly reflective except for individual prominent dipping reflectors with complex orientations that decrease in dip with depth and merge with a lower crustal layer of high reflectivity. The three-dimensional structural orientation of the reflectors beneath the East Shetland platform is at variance with Caledonian reflector trends observed elsewhere in the Caledonian orogen (e.g., north of the Scottish mainland), emphasizing the unique tectonic character of this part of the orogen. Upper to middle crustal reflectors are interpreted as Caledonian or older thrust surfaces that were possibly reactivated by Devonian extension associated with post-Caledonian orogenic collapse. The appearance of two levels of uneven and diffractive (i.e., corrugated) reflectivity in the lower crust, best developed on east-west-oriented profiles, is characteristic of the East Shetland platform. However, a north-south-oriented profile reveals an interpreted south-vergent folded and imbricated thrust structure in the lower crust that appears to be tied to the two levels of corrugated reflectivity on the east-west profiles. A thrust-belt origin for lower crustal reflectivity would explain its corrugated

  14. CONTRIBUTION OF SATELLITE ALTIMETRY DATA IN GEOLOGICAL STRUCTURE RESEARCH IN THE SOUTH CHINA SEA

    Directory of Open Access Journals (Sweden)

    T. D. Tran

    2016-06-01

    Full Text Available The study area is bordered on the East China Sea, the Philippine Sea, and the Australian-Indo plate in the Northeast, in the East and in the South, respectively. It is a large area with the diversely complicated conditions of geological structure. In spite of over the past many years of investigation, marine geological structure in many places have remained poorly understood because of a thick seawater layer as well as of the sensitive conflicts among the countries in the region. In recent years, the satellite altimeter technology allows of enhancement the marine investigation in any area. The ocean surface height is measured by a very accurate radar altimeter mounted on a satellite. Then, that surface can be converted into marine gravity anomaly or bathymetry by using the mathematical model. It is the only way to achieve the data with a uniform resolution in acceptable time and cost. The satellite altimetry data and its variants are essential for understanding marine geological structure. They provide a reliable opportunity to geologists and geophysicists for studying the geological features beneath the ocean floor. Also satellite altimeter data is perfect for planning the more detailed shipboard surveys. Especially, it is more meaningful in the remote or sparsely surveyed regions. In this paper, the authors have effectively used the satellite altimetry and shipboard data in combination. Many geological features, such as seafloor spreading ridges, fault systems, volcanic chains as well as distribution of sedimentary basins are revealed through the 2D, 3D model methods of interpretation of satellite-shipboard-derived data and the others. These results are improved by existing boreholes and seismic data in the study area.

  15. Contribution of Satellite Altimetry Data in Geological Structure Research in the South China Sea

    Science.gov (United States)

    Dung Tran, Tuan; Ho, Thi Huong Mai

    2016-06-01

    The study area is bordered on the East China Sea, the Philippine Sea, and the Australian-Indo plate in the Northeast, in the East and in the South, respectively. It is a large area with the diversely complicated conditions of geological structure. In spite of over the past many years of investigation, marine geological structure in many places have remained poorly understood because of a thick seawater layer as well as of the sensitive conflicts among the countries in the region. In recent years, the satellite altimeter technology allows of enhancement the marine investigation in any area. The ocean surface height is measured by a very accurate radar altimeter mounted on a satellite. Then, that surface can be converted into marine gravity anomaly or bathymetry by using the mathematical model. It is the only way to achieve the data with a uniform resolution in acceptable time and cost. The satellite altimetry data and its variants are essential for understanding marine geological structure. They provide a reliable opportunity to geologists and geophysicists for studying the geological features beneath the ocean floor. Also satellite altimeter data is perfect for planning the more detailed shipboard surveys. Especially, it is more meaningful in the remote or sparsely surveyed regions. In this paper, the authors have effectively used the satellite altimetry and shipboard data in combination. Many geological features, such as seafloor spreading ridges, fault systems, volcanic chains as well as distribution of sedimentary basins are revealed through the 2D, 3D model methods of interpretation of satellite-shipboard-derived data and the others. These results are improved by existing boreholes and seismic data in the study area.

  16. Towards a climatology of tropical cyclone morphometric structures using a newly standardized passive microwave satellite dataset

    Science.gov (United States)

    Cossuth, J.; Hart, R. E.

    2013-12-01

    The structure of a tropical cyclone (TC) is a spatial representation of its organizational pattern and distribution of energy acquisition and release. Physical processes that react to both the external environment and its own internal dynamics manifest themselves in the TC shape. This structure depicts a specific phase in the TC's meteorological lifecycle, reflecting its past and potentially constraining its future development. For a number of reasons, a thorough objective definition of TC structures and an intercomparison of their varieties have been neglected. This lack of knowledge may be a key reason why TC intensity forecasts, despite numerical model improvements and theoretical advances, have been stagnant in recent years relative to track forecasts. Satellite microwave imagers provide multiple benefits in discerning TC structure, but compiling a research quality data set has been problematic due to several inherent technical and logistical issues. While there are multiple satellite sensors that incorporate microwave frequencies, inter-comparison between such sensors is limited by the different available channels, spatial resolutions, and calibration metrics between satellites, all of which provide inconsistencies in resolving TC structural features. To remedy these difficulties, a global archive of TCs as measured by all available US satellite microwave sensors is compiled and standardized. Using global historical best track data, TC microwave data is retrieved from the Defense Meteorological Satellite Program (DMSP) series (including all SSM/I and SSMIS), TMI, AMSR-E, and WindSat sensors. Standardization between sensors for each TC overpass are performed, including: 1) Recalibration of data from the 'ice scattering' channels to a common frequency (89GHz); 2) Resampling the DMSP series to a higher resolution using the Backus-Gilbert technique; and 3) Re-centering the TC center more precisely using the ARCHER technique (Wimmers and Velden 2010) to analyze the

  17. Utilisation of the GMES Sentinel satellites for off-shore platform oil spills and gas flaring monitoring

    Science.gov (United States)

    Di Erasmo, Daniele; Casadio, Stefano; Cardaci, Massimo; Del Frate, Fabio

    2013-04-01

    Oil spills and gas flaring are serious issues for ecosystem, economy and people working on the extraction sites. Oil spill is known. Gas Flaring is the disposal of poison waste gases generated in the oil extraction process. High volumes (every year gas flaring burns worldwide the equivalent of 25% of the overall gas burned in Europe), significantly contributing to the global carbon emission budget (0.5% of total, 2008). European and worldwide legislation pays an increasing attention to it. Our Sentinel1 and 3 SAR and SLSTR usage for this objective won the GMES Masters 2012 IDEAS Challenge. In this study, we use SAR and infrared/thermal (SLSTR) data to identify unexpected misbehaviours of oil platforms, like switch on of the flare and oil spill in the ocean. On one side, the detection and characterization of gas flaring is achieved by analysing the infrared/thermal radiances measured by the SLSTR instrument on-board SENTINEL-3. This technique has been developed and tested using the ENVISAT Along Track Scanning Radiometer (ATSR) dataset and proved to be adequate for long term monitoring of oil extraction for both off-shore and in-shore drilling stations. The spatial/temporal coverage provided by SENTINEL-3 will allow an unprecedented daily monitoring of the oil extraction platforms. On the other side, the detection of oil spills and ships can be performed using Synthetic Aperture Radar (SAR). Both for oil spills and ships, many techniques have been published in the dedicated literature and validated to make the process of detection from SAR automatic. The extension of these techniques to the future SENTINEL-1 data is feasible. The service is mainly addressed to governments (in charge of controlling respect of the rules), civil protection authorities (to promote prevention of pollution damages), oil companies (that want to prove their respect of rules and attention to the environment), and ONGs (involved in the monitoring of the environment). The methodology applied

  18. Effects on dynamic characters of antenna structures in satellite induced by disordered parameters

    Institute of Scientific and Technical Information of China (English)

    Liu Xiangqiu; Wang Cong; Wang Weiyuan; Zou Zhenzhu

    2009-01-01

    A simplified dynamic model of a dish antenna in satellite is established in this article. The model can be easily used to analyze the dynamic behaviour of the antenna structure. In terms of the simplified model, effects on dynamic characters due to the disorder of parameters are investigated in details. The frequencies calculated by the simplified model accord with those computed by ANSYS. Based on the mode shapes of disordered and perfect structure, the influence law and varying trend of dynamic characters of antenna structures in satellites produced by stiffness and mass of antenna ribs, stiffness of antenna membranes and angles between adjacent ribs, are obtained. The analyses in the paper indicate that the effects by disordered parameters can not be ignored in the dynamic analysis of such structures.

  19. Low-Cost Planar MM-Wave Phased Array Antenna for Use in Mobile Satellite (MSAT) Platforms

    DEFF Research Database (Denmark)

    Ojaroudiparchin, Naser; Shen, Ming; Pedersen, Gert F.

    2015-01-01

    In this paper, a compact 8×8 phased array antenna for mobile satellite (MSAT) devices is designed and investigated. 64-elements of 22 GHz patch antennas with coaxial-probe feeds have been used for the proposed planar design. The antenna is designed on a low-cost FR4 substrate with thickness......, dielectric constant, and loss tangent of 0.8 mm, 4.3, and 0.025, respectively. The antenna exhibits good performance in terms of impedance- matching, gain and efficiency characteristics, even though it is designed using high loss substrate with compact dimension (Wsub×Lsub=55×55 mm2). The antenna has more...... than 23 dB realized gain and -0.8 dB radiation efficiency when its beam is tilted to 0o elevation. The center frequency of the designed array can be controlled by adjusting the values of the antenna parameters. Compared with the previous designs, the proposed planar phased array has the advantages...

  20. Structured Analysis and Design of a Satellite Simulator

    Science.gov (United States)

    1977-09-01

    iv List of Fl.’:ur’’". Figura 26 Sequence Errors . , 27 Current Statue Data ••••.•...••••••••• 28 Vehicle Message Data 29 Output Messages 50a...and a structured design method for the design refinement. Functional Specifications Functior.al specifications are imposed on the functional ar... imposed by the desired design goals. Analysis and design techniques are selected that should make the design meet those goals. The functional

  1. A structurally informed autotransporter platform for efficient heterologous protein secretion and display

    Directory of Open Access Journals (Sweden)

    Jong Wouter SP

    2012-06-01

    Full Text Available Abstract Background The self-sufficient autotransporter (AT pathway, ubiquitous in Gram-negative bacteria, combines a relatively simple protein secretion mechanism with a high transport capacity. ATs consist of a secreted passenger domain and a β-domain that facilitates transfer of the passenger across the cell-envelope. They have a great potential for the extracellular expression of recombinant proteins but their exploitation has suffered from the limited structural knowledge of carrier ATs. Capitalizing on its crystal structure, we have engineered the Escherichia coli AT Hemoglobin protease (Hbp into a platform for the secretion and surface display of heterologous proteins, using the Mycobacterium tuberculosis vaccine target ESAT6 as a model protein. Results Based on the Hbp crystal structure, five passenger side domains were selected and one by one replaced by ESAT6, whereas a β-helical core structure (β-stem was left intact. The resulting Hbp-ESAT6 chimeras were efficiently and stably secreted into the culture medium of E. coli. On the other hand, Hbp-ESAT6 fusions containing a truncated β-stem appeared unstable after translocation, demonstrating the importance of an intact β-stem. By interrupting the cleavage site between passenger and β-domain, Hbp-ESAT6 display variants were constructed that remain cell associated and facilitate efficient surface exposure of ESAT6 as judged by proteinase K accessibility and whole cell immuno-EM analysis. Upon replacement of the passenger side domain of an alternative AT, EspC, ESAT6 was also efficiently secreted, showing the approach is more generally applicable to ATs. Furthermore, Hbp-ESAT6 was efficiently displayed in an attenuated Salmonella typhimurium strain upon chromosomal integration of a single encoding gene copy, demonstrating the potential of the Hbp platform for live vaccine development. Conclusions We developed the first structurally informed AT platform for efficient secretion and

  2. Vibration control of platform structures with magnetorheological elastomer isolators based on an improved SAVS law

    Science.gov (United States)

    Xu, Zhao-Dong; Suo, Si; Lu, Yong

    2016-06-01

    This paper presents a study on the vibration control of platform structures with magnetorheological elastomer (MRE) isolators. Firstly, a novel MRE isolator design is put forward based on the mechanical properties of MREs, and subsequently a single-degree-of-freedom (SDOF) dynamic model and a multiple-degree-of-freedom (MDOF) dynamic model for platform systems incorporating such isolators are developed. In order to overcome the shortcomings of the conventional on-off control law, an improved semi-active variable stiffness (SAVS) control law is proposed. The proposed SAVS scheme makes full use of the continuously variable stiffness of MREs, and it takes into account the influence of the sampling interval such that the field-dependent restoring force is made to do negative work during the whole sampling interval as far as possible. The results of numerical simulations demonstrate that the improved SAVS control law can achieve better vibration-control effectiveness than the on-off control law. The comparative results are discussed through examining the mechanisms of these two control laws in light of the power spectral density and the energy input. For an MDOF platform a simplified approach is proposed to combine the local response signals with an equivalent SDOF representation to generate the control parameters for individual isolators, and the effectiveness of such a scheme is also verified through numerical simulation.

  3. Development of deployable structures for large space platform systems. Volume 1: Executive summary

    Science.gov (United States)

    Greenberg, H. S.

    1983-01-01

    The preponderance of study effort was devoted toward the deployable platform systems study which culminated in the detailed design of a ground test article for future development testing. This design is representative of a prototype square-truss, single-fold building-block design that can construct deployable platform structures. This prototype design was selected through a comprehensive and traceable selection process applied to eight competitive designs. The selection process compared the competitive designs according to seven major selection criteria, i.e., design versatility, cost, thermal stability, meteoroid impact significance, reliability, performance predictability, and orbiter integration suitability. In support of the foregoing, a materials data base, and platform systems technology development needs were established. An erectable design of an OTV hangar was selected and recommended for further design development. This design was selected from five study-developed competitive single-fold and double-fold designs including hard-shell and inflatable designs. Also, two deployable manned module configurations, i.e., a hard-shell and an inflatable design were each developed to the same requirements as the composite of two Space station baseline habitat modules.

  4. Doped and undoped graphene platforms: the influence of structural properties on the detection of polyphenols

    Science.gov (United States)

    Chng, Chu'Er; Sofer, Zdenek; Pumera, Martin; Bonanni, Alessandra

    2016-02-01

    There is a huge interest in doped graphene and how doping can tune the material properties for the specific application. It was recently demonstrated that the effect of doping can have different influence on the electrochemical detection of electroactive probes, depending on the analysed probe, on the structural characteristics of the graphene materials and on the type and amount of heteroatom used for the doping. In this work we wanted to investigate the effect of doping on graphene materials used as platform for the detection of catechin, a standard probe which is commonly used for the measurement of polyphenols in food and beverages. To this aim we compared undoped graphene with boron-doped graphene and nitrogen doped graphene platforms for the electrochemical detection of standard catechin oxidation. Finally, the material providing the best electrochemical performance was employed for the analysis of real samples. We found that the undoped graphene, possessing lower amount of oxygen functionalities, higher density of defects and larger electroactive surface area provided the best electroanalytical performance for the determination of catechin in commercial beer samples. Our findings are important for the development of novel graphene platforms for the electrochemical assessment of food quality.

  5. Doped and undoped graphene platforms: the influence of structural properties on the detection of polyphenols.

    Science.gov (United States)

    Chng, Chu'Er; Sofer, Zdenek; Pumera, Martin; Bonanni, Alessandra

    2016-02-10

    There is a huge interest in doped graphene and how doping can tune the material properties for the specific application. It was recently demonstrated that the effect of doping can have different influence on the electrochemical detection of electroactive probes, depending on the analysed probe, on the structural characteristics of the graphene materials and on the type and amount of heteroatom used for the doping. In this work we wanted to investigate the effect of doping on graphene materials used as platform for the detection of catechin, a standard probe which is commonly used for the measurement of polyphenols in food and beverages. To this aim we compared undoped graphene with boron-doped graphene and nitrogen doped graphene platforms for the electrochemical detection of standard catechin oxidation. Finally, the material providing the best electrochemical performance was employed for the analysis of real samples. We found that the undoped graphene, possessing lower amount of oxygen functionalities, higher density of defects and larger electroactive surface area provided the best electroanalytical performance for the determination of catechin in commercial beer samples. Our findings are important for the development of novel graphene platforms for the electrochemical assessment of food quality.

  6. Towards a satellite driven land surface model using SURFEX modelling platform Offline Data Assimilation: an assessment of the method over Europe and the Mediterranean basin

    Science.gov (United States)

    Albergel, Clément; Munier, Simon; Leroux, Delphine; Fairbairn, David; Dorigo, Wouter; Decharme, Bertrand; Calvet, Jean-Christophe

    2017-04-01

    Modelling platforms including Land Surface Models (LSMs), forced by gridded atmospheric variables and coupled to river routing models are necessary to increase our understanding of the terrestrial water cycle. These LSMs need to simulate biogeophysical variables like Surface and Root Zone Soil Moisture (SSM, RZSM), Leaf Area Index (LAI) in a way that is fully consistent with the representation of surface/energy fluxes and river discharge simulations. Global SSM and LAI products are now operationally available from spaceborne instruments and they can be used to constrain LSMs through Data Assimilation (DA) techniques. In this study, an offline data assimilation system implemented in Météo-France's modelling platform (SURFEX) is tested over Europe and the Mediterranean basin to increase prediction accuracy for land surface variables. The resulting Land Data Assimilation System (LDAS) makes use of a simplified Extended Kalman Filter (SEKF). It is able to ingests information from satellite derived (i) SSM from the latest version of the ESA Climate Change Initiative as well as (ii) LAI from the Copernicus GLS project to constrain the multilayer, CO2-responsive version of the Interactions Between Soil, Biosphere, and Atmosphere model (ISBA) coupled with Météo-France's version of the Total Runoff Integrating Pathways continental hydrological system (ISBA-CTRIP). ERA-Interim observations based atmospheric forcing with precipitations corrected from Global Precipitation Climatology Centre observations (GPCC) is used to force ISBA-CTRIP at a resolution of 0.5 degree over 2000-2015. The model sensitivity to the assimilated observations is presented and a set of statistical diagnostics used to evaluate the impact of assimilating SSM and LAI on different model biogeophysical variables are provided. It is demonstrated that the assimilation scheme works effectively. The SEKF is able to extract useful information from the data signal at the grid scale and distribute the RZSM

  7. Exploring the interior structure of Venus with balloons and satellites

    Science.gov (United States)

    Mimoun, David; Cutts, Jim; Stevenson, Dave

    2015-04-01

    Although present daily in our sky as the brightest object at dusk and dawn, many characteristics of Venus remains a mystery. Its dense atmosphere hides the surface from orbital viewing, and the extreme conditions experienced at its surface (460°C, almost 100 bar of pressure at the surface) pose a formidable challenge to the sustained survival and operation of planetary landers. Despite their sharply contrasting atmospheres, Venus is not very different from Earth in size, its composition should be very similar, its orbit is very close to be circular and it is only a little closer to the Sun ( 0.7 A.U). So what are the processes that turned the twin sister of our planet into such a different object? And how can we better understand the processes that have shaped the terrestrial planets, and to understand their formation history? With its harsh surface environment, conventional seismology on Venus, requiring seismometers to be deployed at the surface for months or even years seems impractical. In June 2014, the Keck Institute for Space Studies (KISS) at the California Institute of Technology sponsored a one-week workshop with 30 specialists in the key techniques and technologies relevant to investigating Venus's interior structure focusing on alternative approaches to seismology . As the vertical component of surface motion on Venus is very efficiently coupled into the atmosphere as infrasonic waves, especially at low frequency, several alternative approaches to detecting seismic events can be considered. Seismo-acoustic waves propagate upwards producing pressure fluctuations in the middle atmosphere of Venus and the seismic wave energy is ultimately dissipated by local heating, ionospheric perturbation, or airglow. These atmospheric perturbations can therefore be recorded either in-situ (with a barometer network, deployed on balloons floating in the cloud layer near 55 km) or remotely via optical imaging or electromagnetic sounding deployed on a spacecraft. A report

  8. Detecting damage to offshore platform structures using the time-domain data

    Institute of Scientific and Technical Information of China (English)

    CHENG Yuan-sheng; WANG Zhen

    2008-01-01

    A new method that uses time-domain response data under random loading is proposed for detecting damage to the structural elements of offshore platforms. In our study, a time series model with a fitting order was first constructed using the time-domain of noise data. A sensitivity matrix consisting of the first differential of the autoregressive coefficients of the time series models with respect to the stiffness of structural elements was then obtained based on time-domain response data. Locations and severity of damage may then be estimated by solving the damage vector whose components express the degrees of damage to the structural elements. A unique aspect of this detection method is that it requires acceleration history data from only one or a few sensors. This makes it feasible for a limited array of sensors to obtain sufficient data. The efficiency and reliability of the proposed method was demonstrated by applying it to a simplified offshore platform with damage to one element. Numerical simulations show that the use of a few sensors' acceleration history data, when compared with recorded levels of noise, is capable of detecting damage efficiently. An increase in the number of sensors helps improve the diagnosis success rate.

  9. Structured PDMS Chambers for Enhanced Human Neuronal Cell Activity on MEA Platforms

    Institute of Scientific and Technical Information of China (English)

    Joose Kreutzer; Laura Yl(a)-Outinen; Paula K(a)irn(a); Tiina Kaarela; Jarno Mikkonen; Heli Skottman; Susanna Narkilahti; Pasi Kallio

    2012-01-01

    Structured poly(dimethylsiloxane) (PDMS) chambers were designed and fabricated to enhance the signaling of human Embryonic Stem Cell (hESC) - derived neuronal networks on Microelectrode Array (MEA) platforms.The structured PDMS chambers enable cell seeding on restricted areas and thus,reduce the amount of needed coating materials and cells.In addition,the neuronal cells formed spontaneously active networks faster in the structured PDMS chambers than that in control chainbers.In the PDMS chambers,the neuronal networks were more active and able to develop their signaling into organized signal trains faster than control cultures.The PDMS chamber design enables much more repeatable analysis and rapid growth of functional neuronal network in vitro.Moreover,due to its easy and cheap fabrication process,new configurations can be easily fabricated based on investigator requirements.

  10. Covalent organic frameworks: a materials platform for structural and functional designs

    Science.gov (United States)

    Huang, Ning; Wang, Ping; Jiang, Donglin

    2016-10-01

    Covalent organic frameworks (COFs) are a class of crystalline porous polymer that allows the atomically precise integration of organic units into extended structures with periodic skeletons and ordered nanopores. One important feature of COFs is that they are designable; that is, the geometry and dimensions of the building blocks can be controlled to direct the topological evolution of structural periodicity. The diversity of building blocks and covalent linkage topology schemes make COFs an emerging materials platform for structural control and functional design. Indeed, COF architectures offer confined molecular spaces for the interplay of photons, excitons, electrons, holes, ions and guest molecules, thereby exhibiting unique properties and functions. In this Review, we summarize the major progress in the field of COFs and recent achievements in developing new design principles and synthetic strategies. We highlight cutting-edge functional designs and identify fundamental issues that need to be addressed in conjunction with future research directions from chemistry, physics and materials perspectives.

  11. Reliability-Based Earthquake Design of Jacket-Type Offshore Platforms Considering Pile-Soil-Structure Interaction

    Directory of Open Access Journals (Sweden)

    Behrouz Asgarian

    2009-01-01

    Full Text Available There are plenty of uncertainties in environmental condition of ocean and also in platform element capacities. Reliability-based method could consider these uncertainties. A reliability-based earthquake design method was used to determine the earthquake LRFD parameters for two conventional, steel, pile-supported (template-type offshore platforms located in the Persian Gulf. The pile-soil-structure interaction, the buckling and postbuckling behavior of the braces were considered. Two steel platforms were simulated accurately by the finite element program Opensees. Field data were assumed based on past studies. Sensitiveness of reliability-based method was studied. It was found that the geometry of jacket and different types of braces was important in the capacity and the behavior of offshore platforms. Finally the calculated LRFD elements resistance factors for these two platforms were compared with API recommended factors and it was observed that API recommended element resistance factors were more appropriate for SSL 3.

  12. Design of Structure of Tension Leg Platform for 6 MW Offshore Wind Turbine Based On Fem Analysis

    Directory of Open Access Journals (Sweden)

    Żywicki Jędrzej

    2017-04-01

    Full Text Available The article presents the calculation and design stages of the TLP platform serving as a supporting construction of a 6 MW offshore wind turbine. This platform is designed to anchor at sea at a depth of 60 m. The authors presented the method of parameterization and optimization of the hull geometry. For the two selected geometry variants, the load and motion calculations of the platform subjected to wind, wave and current under 50-year storm conditions were performed. The maximum load on the structure was determined in these extreme storm conditions. For these loads, the MES calculation of the designed platform was performed for the selected variant. Authors have presented a method for calculating maximum wind, wave and current stresses on the structure during the worst storm in the past 50 years. For these loads the MES endurance calculations of the designed platform were made. Based on the results of these calculations, the required structural changes and recalculations have been made in succession to the structural design of the platform, which meets the design requirements and has the required ad hoc strength. The article contains stress analysis in „difficult“ nodes of constructions and discusses ways of solving their problems. The work is part of the WIND-TU-PLA project from the NCBR Research Agreement (Agreement No. MARTECII / 1/2014.

  13. Review of Ballistic Limit Equations for Composite Structure Walls of Satellites

    Science.gov (United States)

    Schaefer, Frank K.*; Schneider, E.; Lambert, M.

    2004-08-01

    In this paper a review of existing ballistic limit equations for CFRP (Carbon Fibre Reinforced Plastics) structure walls of satellites is given, and two new ballistic limit equations are presented. The predictive capabilities of the equations are compared to a set of experimental hypervelocity impact test data of CFRP plates and CFRP honeycomb sandwich panels (satellite structure wall) from ENVISAT, AXAF, and a generic technology program. In the literature, three ballistic limit equations for sandwich panels (SP) made from CFRP face-sheets and Al- honeycomb (H/C) core were found and analyzed (Frost's approach, Approach using Christiansen's Whipple shield Ballistic Limit Equation (BLE), and Taylor's approach). Furthermore, in this paper, a new ballistic limit equation was proposed for CFRP H/C SP (Modified ESA Triple Wall Equation) and for composite panels (plates) with and without MLI attached to the surface. The amount of impact data on CFRP structure walls of satellites found in the literature was rather scarce. The new BLE for CFRP plates makes good predictions to the available set of test data. For the BLE for CFRP H/C SP, it was found that Frost's approach and application of Christiansen's BLE to CFRP H/C SP lead to an overprediction of the ballistic limit diameters for ENVISAT structure walls and the samples of the generic technology program. Taylor's approach and the newly designed MET ballistic limit equation have both yielded good predictions for all samples except for the AXAF samples that had rather thin-walled face-sheets and a thin Al H/C core: for these samples the predictions were conservative. Thus, for use in risk analysis tools for satellites (e. g. ESA's ESABASE/DEBRIS tool or NASA's BUMPER code), it is recommended to use either the MET or Taylor equation.

  14. Developments in Nano-Satellite Structural Subsystem Design at NASA-GSFC

    Science.gov (United States)

    Rossoni, Peter; Panetta, Peter V.

    1999-01-01

    The NASA-GSFC Nano-satellite Technology Development Program will enable flying constellations of tens to hundreds of nano-satellites for future NASA Space and Earth Science missions. Advanced technology components must be developed to make these future spacecraft compact, lightweight, low-power, low-cost, and survivable to a radiation environment over a two-year mission lifetime. This paper describes the efforts underway to develop lightweight, low cost, and multi-functional structures, serviceable designs, and robust mechanisms. As designs shrink, the integration of various subsystems becomes a vital necessity. This paper also addresses structurally integrated electrical power, attitude control, and thermal systems. These innovations bring associated fabrication, integration, and test challenges. Candidate structural materials and processes are examined and the merits of each are discussed. Design and fabrication processes include flat stock composite construction, cast aluminum-beryllium alloy, and an injection molded fiber-reinforced plastic. A viable constellation deployment scenario is described as well as a Phase-A Nano-satellite Pathfinder study.

  15. Recent enhancements to and applications of the SmartBrick structural health monitoring platform

    Science.gov (United States)

    Gunasekaran, A.; Cross, S.; Patel, N.; Sedigh, S.

    2012-04-01

    The SmartBrick network is an autonomous and wireless solution for structural health monitoring of civil infrastructures. The base station is currently in its third generation and has been laboratory- and field-tested in the United States and Italy. The second generation of the sensor nodes has been laboratory-tested as of publication. In this paper, we present recent enhancements made to hardware and software of the SmartBrick platform. Salient improvements described include the development of a new base station with fully-integrated long-range GSM (cellular) and short-range ZigBee communication. The major software improvement described in this paper is migration to the ZigBee PRO stack, which was carried out in the interest of interoperability. To broaden the application of the platform to critical environments that require survivability and fault tolerance, we have striven to achieve compliance with military standards in the areas of hardware, software, and communication. We describe these efforts and present a survey of the military standards investigated. Also described is instrumentation of a three-span experimental bridge in Washington County, Missouri; with the SmartBrick platform. The sensors, whose output is conditioned and multiplexed; include strain gauges, thermocouples, push potentiometers, and three-axis inclinometers. Data collected is stored on site and reported over the cellular network. Real-time alerts are generated if any monitored parameter falls outside its acceptable range. Redundant sensing and communication provide reliability and facilitate corroboration of the data collected. A web interface is used to issue remote configuration commands and to facilitate access to and visualization of the data collected.

  16. Radial mosaic internal structure of rounded diamond crystals from alluvial placers of Siberian platform

    Science.gov (United States)

    Ragozin, A. L.; Zedgenizov, D. A.; Kuper, K. E.; Shatsky, V. S.

    2016-12-01

    The specific gray to almost black diamonds of rounded morphology are especially typical in alluvial placers of the northeastern part of the Siberian platform. The results of study of internal structure of these diamonds are presented. X-ray topography and birefringence patterns of polished plates of studied diamonds show their radial mosaic structure. Diamonds consists of slightly misorientated (up to 20') subindividuals which are combined to mosaic wedge-shaped sectors. Electron back-scatter diffraction technique has demonstrated that subindividuals are often combined in the single large blocks (subgrains). The whole crystals commonly consist of several large subgrains misoriented up to 5° to one another. The total nitrogen content of these diamonds vary in the range 900-3300 ppm and nitrogen aggregation state (NB/(NB + NA)*100) from 25 to 64 %. Rounded diamond crystals of variety V are suggested to have been formed at the high growth rate caused by the high oversaturation of carbon in the crystallization medium. It may result in the splitting of growing crystal and their radial mosaic structure as a sequence. High content of structural nitrogen defects and the great number of mechanical impurities - various mineral and fluid inclusions may also favor to generation of this structure.

  17. Chemozart: a web-based 3D molecular structure editor and visualizer platform.

    Science.gov (United States)

    Mohebifar, Mohamad; Sajadi, Fatemehsadat

    2015-01-01

    Chemozart is a 3D Molecule editor and visualizer built on top of native web components. It offers an easy to access service, user-friendly graphical interface and modular design. It is a client centric web application which communicates with the server via a representational state transfer style web service. Both client-side and server-side application are written in JavaScript. A combination of JavaScript and HTML is used to draw three-dimensional structures of molecules. With the help of WebGL, three-dimensional visualization tool is provided. Using CSS3 and HTML5, a user-friendly interface is composed. More than 30 packages are used to compose this application which adds enough flexibility to it to be extended. Molecule structures can be drawn on all types of platforms and is compatible with mobile devices. No installation is required in order to use this application and it can be accessed through the internet. This application can be extended on both server-side and client-side by implementing modules in JavaScript. Molecular compounds are drawn on the HTML5 Canvas element using WebGL context. Chemozart is a chemical platform which is powerful, flexible, and easy to access. It provides an online web-based tool used for chemical visualization along with result oriented optimization for cloud based API (application programming interface). JavaScript libraries which allow creation of web pages containing interactive three-dimensional molecular structures has also been made available. The application has been released under Apache 2 License and is available from the project website https://chemozart.com.

  18. Lipidomic platform for structural identification of skin ceramides with α-hydroxyacyl chains.

    Science.gov (United States)

    Wu, Zhexue; Shon, Jong Cheol; Lee, Doohyun; Park, Kab-Tae; Park, Chang Seo; Lee, Taeho; Lee, Hye Suk; Liu, Kwang-Hyeon

    2016-03-01

    Skin ceramides are sphingolipids consisting of sphingoid bases, which are linked to fatty acids via an amide bond. Typical fatty acid acyl chains are composed of α-hydroxy fatty acid (A), esterified ω-hydroxy fatty acid (EO), non-hydroxy fatty acid (N), and ω-hydroxy fatty acid (O). We recently established a lipidomic platform to identify skin ceramides with non-hydroxyacyl chains using tandem mass spectrometry. We expanded our study to establish a lipidomic platform to identify skin ceramides with α-hydroxyacyl chains. Tandem mass spectrometry analysis of A-type ceramides using chip-based direct infusion nanoelectrospray-mass spectrometry showed the characteristic fragmentation pattern of both acyl and sphingoid units, which can be applied for structural identification of ceramides. Based on the tandem mass spectrometry fragmentation patterns of A-type ceramides, comprehensive fragmentation schemes were proposed. Our results may be useful for identifying A-type ceramides in the stratum corneum of human skin.

  19. The Use of Additive Manufacturing for Fabrication of Multi-Function Small Satellite Structures

    Energy Technology Data Exchange (ETDEWEB)

    Horais, Brian J [ORNL; Love, Lonnie J [ORNL; Dehoff, Ryan R [ORNL

    2013-01-01

    The use of small satellites in constellations is limited only by the growing functionality of smallsats themselves. Additive manufacturing provides exciting new design opportunities for development of multifunction CubeSat structures that integrate such functions as propulsion and thermal control into the satellite structures themselves. Manufacturing of these complex multifunction structures is now possible in lightweight, high strength, materials such as titanium by using existing electron beam melting additive manufacturing processes. However, the use of today's additive manufacturing capabilities is often cost-prohibitive for small companies due to the large capital investments required. To alleviate this impediment the U.S. Department of Energy has established a Manufacturing Demonstration Facility (MDF) at their Oak Ridge National Laboratory (ORNL) in Tennessee that provides industry access to a broad range of energy-efficient additive manufacturing equipment for collaborative use by both small and large organizations. This paper presents a notional CubeSat multifunction design that integrates the propulsion system into a three-unit (3U) CubeSat structure. The full-scale structure has been designed and fabricated at the ORNL MDF. The use of additive manufacturing for spacecraft fabrication is opening up many new possibilities in design and fabrication capabilities for what had previously been impossible structures to fabricate.

  20. Structural Synthesis of a Class of the Parallel Mechanisms Providing Plane-Parallel Displacement of a Mobile Platform

    Science.gov (United States)

    Rybak, L.; Chichvarin, A.; Sidorenko, R.; Šklíba, J.

    In this article the structural synthesis method of a class of the parallel mechanisms providing plane-parallel displacement of a mobile platform is considered. The considered method is based on application of the screw theory and the concept of virtual chains. The structures of all parallel mechanisms containing three legs are received.

  1. Initialization and state updating utilizing the OpenDA platform and Sentinel Satellite Series data for ecological modeling in the North Sea*

    Science.gov (United States)

    Ziemba, Alexander; El Serafy, Ghada

    2017-04-01

    Ecological modeling relies on the mathematical reconstruction of natural processes which results in a simplification of interactions between a vast number of ecological functions and variables. Despite this simplification, models are able to provide an approximation of the future states of environmental systems, however, inherit therein is a degree of uncertainty due to the simplifications. In order to compensate for these uncertainties and resulting errors, it is possible to anneal real world measurements from both Remote Sensing and In-Situ observations into the model space utilizing data assimilation. Given this, the OpenDA platform and related algorithms are employed in order to initialize the model space and update the model states during hindcasting simulations in order to provide an optimal departure state from which forecasts can be made. Through such a method, future model states have a reduced uncertainty band and provide deterministic results with higher accuracy. This methodology is applied to the prediction of chlorophyll-a concentrations within the southern coastal zone of the North Sea, focusing primarily on the Dutch coastal zone and the Wadden Sea. By utilizing data assimilation with the Sentinel Satellite Series data, an improved forecast is obtained as seen through a comparison of both purely deterministic runs as well as ensemble results which do not implement DA. Various combination of Sentinel data re used in order to evaluate the efficacy and benefit of introducing multiple data sets in the DA process for Coastal and Estuarine Ecological modeling. *This work has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 641762

  2. [Lens platform].

    Science.gov (United States)

    Łukaszewska-Smyk, Agnieszka; Kałuzny, Józef

    2010-01-01

    The lens platform defines lens structure and lens material. Evolution of lens comprises change in their shape, angulation of haptens and transition of three-piece lens into one-piece lens. The lens fall into two categories: rigid (PMMA) and soft (siliconic, acrylic, colameric). The main lens maaterials are polymers (hydrophilic and hydrophobic). The lens platform has an effect on biocompatibility, bioadhesion, stability of lens in capsule, degree of PCO evolution and sensitiveness to laser damages.

  3. Centriolar satellites

    DEFF Research Database (Denmark)

    Tollenaere, Maxim A X; Mailand, Niels; Bekker-Jensen, Simon

    2015-01-01

    Centriolar satellites are small, microscopically visible granules that cluster around centrosomes. These structures, which contain numerous proteins directly involved in centrosome maintenance, ciliogenesis, and neurogenesis, have traditionally been viewed as vehicles for protein trafficking...... highlight newly discovered regulatory mechanisms targeting centriolar satellites and their functional status, and we discuss how defects in centriolar satellite components are intimately linked to a wide spectrum of human diseases....

  4. The Magellanic Satellites Survey: Searching for Hierarchical Structure Formation within the Local Group

    Science.gov (United States)

    Bechtol, Keith; Magellanic Satellites Survey (MagLiteS)

    2017-01-01

    A generic prediction of galaxy formation in the standard cosmological model with cold dark matter is the hierarchical assembly of structure on mass scales ranging from ultra-faint galaxies to galaxy clusters. In the Local Group, dozens of galaxies have been found orbiting the Milky Way and Andromeda. The question of whether the largest Milky Way satellites, the Large and Small Magellanic Clouds, brought in their own entourage of satellites has been a long standing puzzle, and has garnered renewed interest following the recent discovery of more than a dozen ultra-faint galaxy candidates in the southern hemisphere. The on-going Magellanic Satellites Survey (MagLiteS) aims to complete an annulus of contiguous deep optical imaging with Blanco/DECam around the periphery of the Magellanic Clouds, enabling a systematic search for ultra-faint galaxies and other low-surface-brightness stellar substructures associated with the Magellanic system. I will report on the progress of MagLiteS and discuss science highlights from the first observing season, including a new ultra-faint galaxy candidate located ~11 kpc from the Large Magellanic Cloud.

  5. Structure of various K L1 x-ray satellite lines of heavy atoms

    Science.gov (United States)

    Polasik, Marek; Lewandowska-Robak, Maja

    2004-11-01

    Multiconfiguration Dirac-Fock calculations with the inclusion of the transverse (Breit) interaction and QED corrections have been carried out for Pd, Sn, Tb, Ta, Pb, and Th in order to obtain positions and intensities of various electric dipole, electric quadrupole, and magnetic dipole K x-ray diagram lines and of their KL1 satellites. Theoretically constructed stick spectra have been presented together with synthesized spectra (the sum of the Lorentzian natural line shapes) for each studied element. Taking into account the existence of an L -shell hole in the 2s or 2p subshell, the effect of additional L -shell ionization on the shapes and structure of the K x-ray spectra has been examined. It has been observed that generally with increasing atomic number Z the shapes of particular satellite line groups tend to become smoother and to differ less from the shapes of appropriate diagram lines. Relations between the values of energy shifts of various satellite lines for each element and the changes of these relations with Z have also been studied. Additionally, the relations between the intensities of different diagram lines for each element have been systematically analyzed, likewise the changes with Z of the role of particular diagram lines. This study can be helpful in reliable and quantitative interpretation of many experimental K x-ray spectra of Pd, Sn, Tb, Ta, Pb, and Th induced in collisions with various projectiles.

  6. The Three-Dimensional Spatial Structure of Cirrus Clouds Determined from Lidar Satellite Observations

    Science.gov (United States)

    Eloranta, E. W.; Wylie, D.; Wolf, W.

    1996-01-01

    Simultaneous imagery from the University of Wisconsin Volume Imaging Lidar (VIL) and meteorological satellites were used to quantify the spatial structure of cirrus clouds with 60 m resolution. This data was used to determine the spatial distributions of cloud base altitude, cloud top altitude, and mid-cloud altitude. Two dimensional auto-correlation functions describing the mean shape of cirrus clouds were computed. Because cirrus clouds seldom have distinct edges, these correlation functions are derived as a function of a threshold value which defines the cloud edge.

  7. Global transcript structure resolution of high gene density genomes through multi-platform data integration.

    Science.gov (United States)

    O'Grady, Tina; Wang, Xia; Höner Zu Bentrup, Kerstin; Baddoo, Melody; Concha, Monica; Flemington, Erik K

    2016-10-14

    Annotation of herpesvirus genomes has traditionally been undertaken through the detection of open reading frames and other genomic motifs, supplemented with sequencing of individual cDNAs. Second generation sequencing and high-density microarray studies have revealed vastly greater herpesvirus transcriptome complexity than is captured by existing annotation. The pervasive nature of overlapping transcription throughout herpesvirus genomes, however, poses substantial problems in resolving transcript structures using these methods alone. We present an approach that combines the unique attributes of Pacific Biosciences Iso-Seq long-read, Illumina short-read and deepCAGE (Cap Analysis of Gene Expression) sequencing to globally resolve polyadenylated isoform structures in replicating Epstein-Barr virus (EBV). Our method, Transcriptome Resolution through Integration of Multi-platform Data (TRIMD), identifies nearly 300 novel EBV transcripts, quadrupling the size of the annotated viral transcriptome. These findings illustrate an array of mechanisms through which EBV achieves functional diversity in its relatively small, compact genome including programmed alternative splicing (e.g. across the IR1 repeats), alternative promoter usage by LMP2 and other latency-associated transcripts, intergenic splicing at the BZLF2 locus, and antisense transcription and pervasive readthrough transcription throughout the genome.

  8. Assimilation analysis of Rammasun typhoon structure over Northwest Pacific using satellite data

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hua; CHOU Jifan; QIU Chongjian

    2004-01-01

    The kinetic and thermodynamic structure of typhoon Rammasun (No. 0205) over the Northwest Pacific has been analyzed, using NOAA-16 polar orbiting Advanced Microwave Sounding Unit (AMSU) data collected on 2 July, 2002. The three-dimensional variational (3DVAR) assimilation technology is used to assimilate the satellite observation. The results show that the characteristics of the 3D typhoon structure can be more reasonably described from the assimilated data. The warm-cored structure of the typhoon is enhanced in the analyzed field, which corresponds to strong typhoon. The typhoon cyclonic circulation in the middle and lower layers is apparently strengthened, and the strong anticyclonic circulation appears at the top of the typhoon. The water vapor and its supply in the typhoon are enhanced. The microwave assimilation data may be used to supply the lack of the conventional observation data over the tropical ocean.

  9. Enabling High Spectral Resolution Thermal Imaging from CubeSat and MicroSatellite Platforms Using Uncooled Microbolometers and a Fabry-Perot interferometer

    Science.gov (United States)

    Wright, R.; Lucey, P. G.; Crites, S.; Garbeil, H.; Wood, M.; Pilger, E. J.; Honniball, C.; Gabrieli, A.

    2016-12-01

    Measurements of reflectance or emittance in tens of narrow, contiguous wavebands, allow for the derivation of laboratory quality spectra remotely, from which the chemical composition and physical properties of targets can be determined. Although spaceborne (e.g. EO-1 Hyperion) hyperspectral data in the 0.4-2.5 micron (VSWIR) region are available, the provision of equivalent data in the log-wave infrared has lagged behind, there being no currently operational high spatial resolution LWIR imaging spectrometer on orbit. This is attributable to two factors. Firstly, earth emits less light than it reflects, reducing the signal available to measure in the TIR, and secondly, instruments designed to measure (and spectrally decompose) this signal are more complex, massive, and expensive than their VSWIR counterparts, largely due to the need to cryogenically cool the detector and optics. However, this measurement gap needs to be filled, as LWIR data provide fundamentally different information than VSWIR measurements. The TIRCIS instrument (Thermal Infra-Red Compact Imaging Spectrometer), developed at the Hawaii Institute of Geophysics and Planetology, uses a Fabry-Perot interferometer, an uncooled microbolometer array, and push-broom scanning to acquire hyperspectral image data in the 8-14 micron spectral range. Radiometric calibration is provided by blackbody targets while spectral calibration is achieved using monochromatic light sources. The instrument has a mass of <15 kg and dimensions of 53 cm × 25 cm × 22 cm, and has been designed to be compatible with integration into a micro-satellite platform. (A precursor to this instrument was launched onboard a 55 kg microsatellite as part of the ORS-4 mission in October 2015). The optical design yields a 120 m ground sample size given an orbit of 500 km. Over the wavelength interval of 7.5 to 14 microns up to 50 spectral samples are possible (the accompanying image shows a quartz spectrum composed of 17 spectral samples). Our

  10. Best period for high spatial resolution satellite images for the detection of marks of buried structures

    Directory of Open Access Journals (Sweden)

    Dimitrios Kaimaris

    2012-06-01

    Full Text Available Improvements in sensor technology in recent decades led to the creation of ground, air and space imaging systems, whose data can be used in archaeological studies. Greece is one of the lucky areas that are rich in archaeological heritage. The detection of prehistoric/historic undiscovered constructions on satellite images or aerial photos is a complex and complicated matter. These marks are not visible from the ground, they can, however, be traced on satellite or aerial images, because of the differences in tone and texture. These differences appear as crop, soil and shadow marks. Undoubtedly, the detection of buried structures requires a suitable spatial resolution image, taken under appropriate meteorological conditions and during the best period of the vegetation growing cycle. According to the pertinent literature, detecting covered memorials may be achieved either accidentally or, usually, after a systematic investigation based on historical narratives. The purpose of this study is to determine the factors that facilitate or hinder the detection of buried structures through high spatial resolution satellite imagery. In this study, pan sharpened images from the QuickBird-2 satellite were used, of a spatial resolution of 0.60-0.70 m. This study concerns the detection of marks of the ancient Via Egnatia, from the ancient Amphipolis to Philippi (Eastern Macedonia, Greece. We studied different types of vegetation in the region and their phenological cycle. Taking into account the vegetation phenological cycle of the study area as well as the meteorological data, four pan sharpened QuickBird-2 images of a spatial resolution of 0.60–0.70 m. were used, during four different seasons. By processing the four images, we can determine the one acquired during the most appropriate conditions for the detection of buried structures. The application of this methodology in the study area had positive results, and not only was the main purpose of this

  11. Development of deployable structures for large space platform systems, volume 1

    Science.gov (United States)

    1982-01-01

    Generic deployable spacecraft configurations and deployable platform systems concepts were identified. Sizing, building block concepts, orbiter packaging, thermal analysis, cost analysis, and mass properties analysis as related to platform systems integration are considered. Technology needs are examined and the major criteria used in concept selection are delineated. Requirements for deployable habitat modules, tunnels, and OTV hangars are considered.

  12. Adaptive bimaterial lattices to mitigate thermal expansion mismatch stresses in satellite structures

    Science.gov (United States)

    Toropova, Marina M.; Steeves, Craig A.

    2015-08-01

    Earth-orbiting satellites regularly pass from sunlight to shade and back; these transitions are typically accompanied by significant temperature changes. When adjoining parts of a satellite that are made of different materials are subjected to large temperature changes, thermal mismatch stresses arise that are a function of the temperature change and the difference in coefficients of thermal expansion (CTEs) between the two materials. These thermal stresses are linked to undesirable deformation and, through long-term cycling, fatigue and failure of the structure. This paper describes a type of anisotropic lattice that can serve as a stress-free adaptor between two materials, eliminating thermal mismatch stresses and their concomitant consequences. The lattices consist of planar nonidentical anisotropic bimaterial cells, each designed based on a virtual triangle. Physically the cells consist of a triangle made of material with higher CTE surrounded by a hexagon made of material with lower CTE. Different skew angles of the hexagon make a particular cell and the whole lattice anisotropic. The cells can be designed and combined in a lattice in such a way that one edge of the lattice has CTE that coincides with the CTE of the first part of the structure (substrate 1), while the other edge of the lattice has CTE equal to the CTE of the second part of the structure (substrate 2). If all joints between the parts of each cell, neighbouring cells, and the lattice and the substrates are pinned, the whole structure will be free of thermal stresses. This paper will discuss the fundamental principles governing such lattices, their refinement for special circumstances, and opportunities for improving the structural performance of the lattices. This will be presented coupled to a rational strategy for lattice design.

  13. Microarrays as Model Biosensor Platforms to Investigate the Structure and Affinity of Aptamers

    Directory of Open Access Journals (Sweden)

    Jennifer A. Martin

    2016-01-01

    Full Text Available Immobilization of nucleic acid aptamer recognition elements selected free in solution onto the surface of biosensor platforms has proven challenging. This study investigated the binding of multiple aptamer/target pairs immobilized on a commercially available microarray as a model system mimicking biosensor applications. The results indicate a minimum distance (linker length from the surface and thymine nucleobase linker provides reproducible binding across varying conditions. An indirect labeling method, where the target was labeled with a biotin followed by a brief Cy3-streptavidin incubation, provided a higher signal-to-noise ratio and over two orders of magnitude improvement in limit of detection, compared to direct Cy3-protein labeling. We also showed that the affinities of the aptamer/target interaction can change between direct and indirect labeling and conditions to optimize for the highest fluorescence intensity will increase the sensitivity of the assay but will not change the overall affinity. Additionally, some sequences which did not initially bind demonstrated binding when conditions were optimized. These results, in combination with studies demonstrating enhanced binding in nonselection buffers, provided insights into the structure and affinity of aptamers critical for biosensor applications and allowed for generalizations in starting conditions for researchers wishing to investigate aptamers on a microarray surface.

  14. Data and Structure Characteristics Analysis for a Scientific Research E-Management Platform in the Humanities and Social Sciences

    OpenAIRE

    Chen, Xing

    2007-01-01

    This article first discusses the characteristics of scientific research in the humanities and social sciences (HSS), and then lays out its basic e-management demands. In building a scientific research e-management platform (SREMP), attention must be paid to the characteristics of its data and structure. The data in the SREMP of HSS domains have multiformity. That is, their structure should be an integrative multi-functioned information subsystem with a clearly graded data management mode, fle...

  15. The onboard control system of "Navigator" platform

    Science.gov (United States)

    Syrov, A. S.; Smirnov, V. V.; Sokolov, V. N.; Iodko, G. S.; Mischikhin, V. V.; Kosobokov, V. N.; Shatskii, M. A.; Dobrynin, D. A.

    2016-12-01

    A brief description of the design concept, structure and performance of the onboard control system (AOCS) of the "Navigator" satellite platform, on the basis of which the spacecraft "Electro-L' and "Spektr-R" are designed, is presented. The test-flight results of the AOCS attitude accuracy are given. Approaches to the further development of the onboard control equipment for advanced spacecraft are determined and presented.

  16. Structure design and enviromental test of BGO calorimeter for satellite DAMPE

    Science.gov (United States)

    Hu, Yiming; Feng, Changqing; Zhang, Yunlong; Chen, Dengyi; Chang, Jin

    2016-07-01

    The Dark Matter Particle Explorer, DAMPE, is a new designed satellite developed for the new Innovation 2020 program of Chinese Academy of Sciences. As the most important payload of China's first scientific satellite for detecting dark matter, the primary purposes of BGO calorimeter is to measure the energy of incident high energy electrons and gamma rays (5GeV-10TeV) and to identify hadron and electronics. BGO calorimeter also provides an important background discriminator by measuring the energy deposition due to the particle shower that produced by the e^{±}, γ and imaging their shower development profile. Structure design of BGO calorimeter is described in this paper. The new designed BGO calorimeter consists of 308 BGO crystals coupled with photomultiplier tubes on its two ends. The envelop size of the BGO calorimeter is 907.5mm×907.5mm×494.5mm,and the weight of which is 1051.4Kg. The most important purpose of mechanical design is how to package so heavy crystals into a detector as required arrangement and to make sure reliability and safety. This paper describes the results of vibration tests using the Flight Module of the BGO Calorimeter for the DAMPE satellite. During the vibration tests, no degradation of the mechanical assembly was observed. After random or sinusoidal vibrations, there was no significant changes of the frequency signatures observed during the modal surveys. The comparison of results of cosmic ray tests before and after the vibration shows no change in the performance of the BGO calorimeter.

  17. Teleoperated Marsupial Mobile Sensor Platform Pair for Telepresence Insertion Into Challenging Structures

    Science.gov (United States)

    Krasowski, Michael J.; Prokop, Norman F.; Greer, Lawrence C.

    2011-01-01

    the interior of a bus whose landing is 44 in. (.1.1 m) from the road surface. This vehicle can position the end of its ramp to a surface over 50 in. (.1.3 m) above ground level and can drive over rail heights exceeding 6 in. (.15 cm). Thus configured, this vehicle can conceivably deliver the smaller robot to the end platform of New York City subway cars from between the rails. This innovation is scalable to other formulations for size, mobility, and surveillance functions. Conceivably the larger vehicle can be configured to traverse unstable rubble and debris to transport a smaller search and rescue vehicle as close as possible to the scene of a disaster such as a collapsed building. The smaller vehicle, tethered or otherwise, and capable of penetrating and traversing within the confined spaces in the collapsed structure, can transport imaging and other sensors to look for victims or other targets.

  18. Structural uncertainty in air mass factor calculation for NO2 and HCHO satellite retrievals

    Science.gov (United States)

    Lorente, Alba; Folkert Boersma, K.; Yu, Huan; Dörner, Steffen; Hilboll, Andreas; Richter, Andreas; Liu, Mengyao; Lamsal, Lok N.; Barkley, Michael; De Smedt, Isabelle; Van Roozendael, Michel; Wang, Yang; Wagner, Thomas; Beirle, Steffen; Lin, Jin-Tai; Krotkov, Nickolay; Stammes, Piet; Wang, Ping; Eskes, Henk J.; Krol, Maarten

    2017-03-01

    Air mass factor (AMF) calculation is the largest source of uncertainty in NO2 and HCHO satellite retrievals in situations with enhanced trace gas concentrations in the lower troposphere. Structural uncertainty arises when different retrieval methodologies are applied within the scientific community to the same satellite observations. Here, we address the issue of AMF structural uncertainty via a detailed comparison of AMF calculation methods that are structurally different between seven retrieval groups for measurements from the Ozone Monitoring Instrument (OMI). We estimate the escalation of structural uncertainty in every sub-step of the AMF calculation process. This goes beyond the algorithm uncertainty estimates provided in state-of-the-art retrievals, which address the theoretical propagation of uncertainties for one particular retrieval algorithm only. We find that top-of-atmosphere reflectances simulated by four radiative transfer models (RTMs) (DAK, McArtim, SCIATRAN and VLIDORT) agree within 1.5 %. We find that different retrieval groups agree well in the calculations of altitude resolved AMFs from different RTMs (to within 3 %), and in the tropospheric AMFs (to within 6 %) as long as identical ancillary data (surface albedo, terrain height, cloud parameters and trace gas profile) and cloud and aerosol correction procedures are being used. Structural uncertainty increases sharply when retrieval groups use their preference for ancillary data, cloud and aerosol correction. On average, we estimate the AMF structural uncertainty to be 42 % over polluted regions and 31 % over unpolluted regions, mostly driven by substantial differences in the a priori trace gas profiles, surface albedo and cloud parameters. Sensitivity studies for one particular algorithm indicate that different cloud correction approaches result in substantial AMF differences in polluted conditions (5 to 40 % depending on cloud fraction and cloud pressure, and 11 % on average) even for low

  19. μ-Nitrido Diiron Macrocyclic Platform: Particular Structure for Particular Catalysis.

    Science.gov (United States)

    Afanasiev, Pavel; Sorokin, Alexander B

    2016-04-19

    The ultimate objective of bioinspired catalysis is the development of efficient and clean chemical processes. Cytochrome P450 and soluble methane monooxygenase enzymes efficiently catalyze many challenging reactions. Extensive research has been performed to mimic their exciting chemistry, aiming to create efficient chemical catalysts for functionalization of strong C-H bonds. Two current biomimetic approaches are based on (i) mononuclear metal porphyrin-like complexes and (ii) iron and diiron non-heme complexes. However, biomimetic catalysts capable of oxidizing CH4 are still to be created. In the search for powerful oxidizing catalysts, we have recently proposed a new bioinspired strategy using N-bridged diiron phthalocyanine and porphyrin complexes. This platform is particularly suitable for stabilization of Fe(IV)Fe(IV) complexes and can be useful to generate high-valent oxidizing active species. Indeed, the possibility of charge delocalization on two iron centers, two macrocyclic ligands, and the nitrogen bridge makes possible the activation of H2O2 and peracids. The ultrahigh-valent diiron-oxo species (L)Fe(IV)-N-Fe(IV)(L(+•))═O (L = porphyrin or phthalocyanine) have been prepared at low temperatures and characterized by cryospray MS, UV-vis, EPR, and Mössbauer techniques. The highly electrophilic (L)Fe(IV)-N-Fe(IV)(L(+•))═O species exhibit remarkable reactivity. In this Account, we describe the catalytic applications of μ-nitrido diiron complexes in the oxidation of methane and benzene, in the transformation of aromatic C-F bonds under oxidative conditions, in oxidative dechlorination, and in the formation of C-C bonds. Importantly, all of these reactions can be performed under mild and clean conditions with high conversions and turnover numbers. μ-Nitrido diiron species retain their binuclear structure during catalysis and show the same mechanistic features (e.g., (18)O labeling, formation of benzene epoxide, and NIH shift in aromatic oxidation

  20. A Color-Texture-Structure Descriptor for High-Resolution Satellite Image Classification

    Directory of Open Access Journals (Sweden)

    Huai Yu

    2016-03-01

    Full Text Available Scene classification plays an important role in understanding high-resolution satellite (HRS remotely sensed imagery. For remotely sensed scenes, both color information and texture information provide the discriminative ability in classification tasks. In recent years, substantial performance gains in HRS image classification have been reported in the literature. One branch of research combines multiple complementary features based on various aspects such as texture, color and structure. Two methods are commonly used to combine these features: early fusion and late fusion. In this paper, we propose combining the two methods under a tree of regions and present a new descriptor to encode color, texture and structure features using a hierarchical structure-Color Binary Partition Tree (CBPT, which we call the CTS descriptor. Specifically, we first build the hierarchical representation of HRS imagery using the CBPT. Then we quantize the texture and color features of dense regions. Next, we analyze and extract the co-occurrence patterns of regions based on the hierarchical structure. Finally, we encode local descriptors to obtain the final CTS descriptor and test its discriminative capability using object categorization and scene classification with HRS images. The proposed descriptor contains the spectral, textural and structural information of the HRS imagery and is also robust to changes in illuminant color, scale, orientation and contrast. The experimental results demonstrate that the proposed CTS descriptor achieves competitive classification results compared with state-of-the-art algorithms.

  1. Evidence of the nature of core-level photoemission satellites using angle-resolved photoemission extended fine structure

    Energy Technology Data Exchange (ETDEWEB)

    Moler, E.J.; Kellar, S.A.; Huff, W.R.A. [Lawrence Berkeley National Lab., CA (United States)] [and others

    1997-04-01

    The authors present a unique method of experimentally determining the angular momentum and intrinsic/extrinsic origin of core-level photoemission satellites by examining the satellite diffraction pattern in the Angle Resolved Photoemission Extended Fine Structure (ARPEFS) mode. They show for the first time that satellite peaks not associated with chemically differentiated atomic species display an ARPEFS intensity oscillation. They present ARPEFS data for the carbon 1s from ({radical}3x{radical}3)R30 CO/Cu(111) and p2mg(2xl)CO/Ni(110), nitrogen 1s from c(2x2) N{sub 2}/Ni(100), cobalt 1s from p(1x1)Co/Cu(100), and nickel 3p from clean nickel (111). The satellite peaks and tails of the Doniach-Sunjic line shapes in all cases exhibit ARPEFS curves which indicate an angular momentum identical to the main peak and are of an intrinsic nature.

  2. Surface flow structure of the Gulf Stream from composite imagery and satellite-tracked drifters

    Directory of Open Access Journals (Sweden)

    C. P. Mullen

    1994-01-01

    Full Text Available A unique set of coutemporaneous satellite-tracked drifters and five-day composite Advanced Very High Resolution Radionmeter (AVHRR satellite imagery of the North Atlantic has been analyzed to examine the surface flow structure of the Gulf Stream. The study region was divided into two sections, greater than 37° N and less than 37° N, in order to answer the question of geographic variability. Fractal and spectral analyses methods were applied to the data. Fractal analysis of the Lagrangian trajectories showed a fractal dimension of 1.21 + 0.02 with a scaling range of 83 - 343 km. The fractal dimension of the temperature fronts of the composite imagery is similar for the two regions with D = 1.11 + 0.01 over a scaling range of 4 - 44 km. Spectral analysis also reports a fairly consistent value for the spectral slope and its scaling range. Therefore, we conclude there is no geographic variability in the data set. A suitable scaling range for this contemporaneous data set is 80 - 200 km which is consistent with the expected physical conditions in the region. Finally, we address the idea of using five-day composite imagery to infer the surface flow of the Gulf Stream. Close analyses of the composite thermal fronts and the Lagrangian drifter trajectories show that the former is not a good indicator of the latter.

  3. S1 satellite DNA repetitive units display identical structure and overall variability in all Anatolian brown frog taxa.

    Science.gov (United States)

    Picariello, Orfeo; Feliciello, Isidoro; Chinali, Gianni

    2016-02-01

    S1 satellite DNA from Palearctic brown frogs has a species-specific structure in all European species. We characterized S1 satellite DNA from the Anatolian brown frogs Rana macrocnemis, R. camerani, and R. holtzi in order to define their taxonomic rank and the structure of this satellite in this frog lineage. Southern blots of genomic DNA digested with KpnI, EcoRV, NdeI, NheI, or StuI produced the same pattern of satellite DNA bands. Moreover, quantitative dot blots showed that this satellite DNA accounts for 0.1 % of the genome in all taxa. Analysis of the overall genomic variability of the S1a repeat sequence in specimens from various populations demonstrated that this repetitive unit also has the same size (476 bp), the same most common sequence (MCS) and the same overall variability in all three taxa, and also in R. macrocnemis tavasensis. The S1a repetitive unit presents three deletions of 9, 8 and 1 bp compared to the 494-bp S1a repeat from European frogs. The S1a MCS has three variable positions (sequence WWTK in positions 183-186), due to the presence of two repeat subpopulations with motifs AATG and WWTT in all taxa. Unlike previously analyzed mitochondrial and nuclear sequences that show considerable variations among these taxa, no difference could be detected in the structure and variability of the S1 satellite repetitive units. This suggests that these taxa should belong to a single species. Our results indicate that this satellite DNA variety probably formed when the Anatolian lineage radiated from common ancestor about 4 mya, and since then has maintained its structure in all four taxa examined.

  4. The Second Young Engineers' Satellite: Innovative Technology through Education

    Science.gov (United States)

    Fujii, Hironori A.; Kruijff, Michiel; van der Heide, Erik J.; Watanabe, Takeo

    The second Young Engineers' Satellite,YES2, is the longest manmade structure launched in 2007 and is space piggybacked on the Foton-M3 microgravity platform with the objective of a controlled deployment of a 32km tether. This paper introduces the object and the flight results of YES2 and the performance of the satellite is studied in comparison of the simulations and ground tests with respect to the flight results.

  5. HiTempo: a platform for time-series analysis of remote-sensing satellite data in a high-performance computing environment

    CSIR Research Space (South Africa)

    Van den Bergh, F

    2012-08-01

    Full Text Available Course resolution earth observation satellites offer large data sets with daily observations at global scales. These data sets represent a rich resource that, because of the high acquisition rate, allows the application of time-series analysis...

  6. Application of a Dot Blot Hybridization Platform to Assess Streptococcus uberis Population Structure in Dairy Herds

    Science.gov (United States)

    Albuquerque, Pedro; Ribeiro, Niza; Almeida, Alexandre; Panschin, Irena; Porfirio, Afonso; Vales, Marta; Diniz, Francisca; Madeira, Helena; Tavares, Fernando

    2017-01-01

    Streptococcus uberis is considered one of the most important pathogens associated with bovine mastitis. While traditionally acknowledged as an environmental pathogen, S. uberis has been shown to adopt a contagious epidemiological pattern in several dairy herds. Since different control strategies are employed depending on the mode of transmission, in-depth studies of S. uberis populations are essential to determine the best practices to control this pathogen. In this work, we optimized and validated a dot blot platform, combined with automatic image analysis, to rapidly assess the population structure of infective S. uberis, and evaluated its efficiency when compared to multilocus sequence analysis (MLSA) genotyping. Two dairy herds with prevalent S. uberis infections were followed in a 6 month period, in order to collect and characterize isolates from cows with persistent infections. These herds, located in Portugal (Barcelos and Maia regions), had similar management practices, with the herd from Barcelos being smaller and having a better milking parlor management, since infected cow segregation was immediate. A total of 54 S. uberis isolates were obtained from 24 different cows from the two herds. To overcome operator-dependent analysis of the dot blots and increase the technique's consistency and reliability, the hybridization signals were converted into probability values, with average probabilities higher than 0.5 being considered positive results. These data allowed to confirm the isolates' identity as S. uberis using taxa-specific markers and to determine the presence of virulence- and antibiotic resistance-related genes. In addition, MLSA allowed to disclose the most prevalent S. uberis clonal lineages in both herds. Seven different clusters were identified, with Barcelos showing a high clonal diversity and Maia a dominant lineage infecting most cows, suggesting distinct epidemiological patterns, with S. uberis displaying an environmental or contagious

  7. A vector method for synthesis of orbits and the structure of satellite constellations for multiswath periodic coverage of the Earth

    Science.gov (United States)

    Saulskiy, V. K.

    2016-07-01

    Single satellites and multisatellite constellations for the periodic coverage of the Earth are considered. The main feature is the use of several cameras with different swath widths. A vector method is proposed which makes it possible to find orbits minimizing the periodicities of coverage of a given area of Earth uniformly for all swaths. Their number is not limited, but the relative dimensions should satisfy the Fibonacci series or some new numerical sequences. The results apply to constellations of any number of satellites. Formulas were derived for calculating their structure, i.e., relative position in the constellation. Examples of orbits and the structure of constellations for the Earth's multiswath coverage are presented.

  8. Electromagnetic structures at auroral latitudes from luterkosmos-bolgariya-1300 satellite data

    Energy Technology Data Exchange (ETDEWEB)

    Dubinin, E.M.; Bankov, N.; Izraelevich, P.L.; Nikolaeva, N.S.; Podgornyi, I.M.; Todorieva, L.

    1986-11-01

    Strong electromagnetic disturbances in the auroral region at altitudes of about 900 km, which were recorded by the Interkosmos-Bolgariya-1300 satellite, are analyzed. An attempt is undertaken to determine general regularities in their structures. A specific class of events in which the disturbances of the electric and magnetic fields have the same form are distinguished. The events are a result of the propagation of oblique Alfven waves with lambda /sub z/ about 3.10 /sub s/ km, lambda /sub x/ less than or equal to 10 km, and f about 1 Hz. The lack of an apparent correlation between the mutually perpendicular components of the electric and magnetic fields is due to a significant phase shift between the disturbances of the electric and magnetic fields, which indicates the interference of the waves incident and reflected at the ionosphere.

  9. Deriving required model structures to predict global wildfire burned area from multiple satellite and climate observations

    Science.gov (United States)

    Forkel, Matthias; Dorigo, Wouter; Lasslop, Gitta; Teubner, Irene; Chuvieco, Emilio; Thonicke, Kirsten

    2017-04-01

    Vegetation fires have important effects on human infrastructures and ecosystems, and affect atmospheric composition and the climate system. Consequently, it is necessary to accurately represent fire dynamics in global vegetation models to realistically represent the role of fires in the Earth system. However, it is unclear which model structures are required in global vegetation/fire models to represent fire activity at regional to global scales. Here we aim to identify required structural components and necessary complexities of global vegetation/fire models to predict spatial-temporal dynamics of burned area. For this purpose, we developed the SOFIA (satellite observations for fire activity) modelling approach to predict burned area from several satellite and climate datasets. A large ensemble of SOFIA models was generated and each model was optimized against observed burned area data. Models that account for a suppression of fire activity at wet conditions result in the highest performances in predicting burned area. Models that include vegetation optical depth data from microwave satellite observations reach higher performances in predicting burned area than models that do not include this dataset. Vegetation optical depth is a proxy for vegetation biomass, density and water content and thus indicates a strong control of vegetation states and dynamics on fire activity. We further compared the best performing SOFIA models with the global process-oriented vegetation/fire model JSBACH-SPITFIRE, and with the GFED and Fire_CCI burned area datasets. SOFIA models outperform JSBACH-SPITFIRE in predicting regional variabilities of burned area. We further applied the best SOFIA model to identify controlling factors for burned area. The results indicate that fire activity is controlled by regionally diverse and complex interactions of human, vegetation and climate factors. Our results demonstrate that the use of multiple observational datasets on climate, hydrological

  10. Composition, structure and diversity characterization of dry tropical forest of Chhattisgarh using satellite data

    Institute of Scientific and Technical Information of China (English)

    Tarun Thakur; S.L. Swamy; Ajit Singh Nain

    2014-01-01

    The purpose of this study was to characterize the land use, vegetation structure, and diversity in the Barnowpara Sanctuary, Raipur district, Chhattisgarh, India through the use of satellite remote sensing and GIS. Land cover and vegetation were spatially analyzed by digitally classifying IRS 1D LISS III satellite data using a maximum likelihood algorithm. Later, the variations in structure and diversity in different forest types and classes were quantified by adopting quadratic sampling proce-dures. Nine land-cover types were delineated: teak forest, dense mixed forest, degraded mixed forest, Sal mixed forest, open mixed forest, young teak plantation, grasslands, agriculture, habitation, and water bodies. The classification accuracy for different land-use classes ranged from 71.23%to 100%. The highest accuracy was observed in water bodies and grass-land, followed by habitation and agriculture, teak forest, degraded mixed forest, and dense mixed forest. The accuracy was lower in open mixed forest, and sal mixed forest. Results revealed that density of different forest types varied from 324 to 733 trees ha-1, basal area from 8.13 to 28.87 m2·ha-1 and number of species from 20 to 40. Similarly, the diversity ranged from 1.36 to 2.98, concentration of dominance from 0.06 to 0.49, species richness from 3.88 to 6.86, and beta diversity from 1.29 to 2.21. The sal mixed forest type recorded the highest basal area, diversity was highest in the dense mixed forest, and the teak forest recorded maximum density, which was poor in degraded mixed forests. The study also showed that Normalized Difference Vegetation Index (NDVI) was strongly cor-related to with the Shannon Index and species richness.

  11. Incorporating piezoelectric energy harvester in tunable vibration absorber for application in multi-modal vibration reduction of a platform structure

    Science.gov (United States)

    Lee, Chun-Ying; Lin, Jia-Hong

    2017-02-01

    Tunable vibration absorber is an effective device to reduce the vibration of structure subjected to harmonic excitation. The vibration energy is transferred mostly to the absorber when the natural frequency of the absorber is tuned to the excitation frequency. In this study, a piezoelectric (PZT) transducer was incorporated into the absorber in order to harvest the vibration energy and still alleviate the vibration of a platform structure. The tuning in dynamic characteristics of the absorber was facilitated by controlling its tip mass. The design formulation of the absorber was presented with a single degree-of-freedom (SDOF) model having the equivalent parameters. In the meantime, an optimal electric load resistor was determined to maximize the power output from the PZT transducer. The experimental measurement validated the SDOF model with good accuracy both in the vibration response and the output electric voltage. Finally, the absorber was installed on a platform structure to investigate its vibration reduction and energy harvesting capability for the external disturbance frequency covering certain frequency span. With three resonance modes of the platform studied, the absorber was able to reduce more than 80% of its original vibration and harvest several folds of electric power comparing with the untuned absorber. Although the performance in vibration reduction was slightly influenced (sensor or actuator applications.

  12. Structure and dynamics of the microbial communities underlying the carboxylate platform for biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Hollister, Emily B.; Gentry, Terry J. [Texas A and M Univ., College Station, TX (United States). Dept. of Soil and Crop Sciences; Forrest, Andrea K.; Holtzapple, Mark T. [Texas A and M Univ., College Station, TX (United States). Dept. of Chemical Engineering; Wilkinson, Heather H.; Ebbole, Daniel J. [Texas A and M Univ., College Station, TX (United States). Dept. of Plant Pathology and Microbiology; Malfatti, Stephanie A.; Tringe, Susannah G. [DOE Joint Genome Institute, Walnut Creek, CA (United States)

    2010-09-15

    The carboxylate platform utilizes a mixed microbial community to convert lignocellulosic biomass into chemicals and fuels. While much of the platform is well understood, little is known about its microbiology. Mesophilic (40 C) and thermophilic (55 C) fermentations employing a sorghum feedstock and marine sediment inoculum were profiled using 16S rRNA tag-pyrosequencing over the course of a 30-day incubation. The contrasting fermentation temperatures converted similar amounts of biomass, but the mesophilic community was significantly more productive, and the two temperatures differed significantly with respect to propionic and butyric acid production. Pyrotag sequencing revealed the presence of dynamic communities that responded rapidly to temperature and changed substantially over time. Both temperatures were dominated by bacteria resembling Clostridia, but they shared few taxa in common. The species-rich mesophilic community harbored a variety of Bacteroidetes, Actinobacteria, and {gamma}-Proteobacteria, whereas the thermophilic community was composed mainly of Clostridia and Bacilli. Despite differences in composition and productivity, similar patterns of functional class dynamics were observed. Over time, organisms resembling known cellulose degraders decreased in abundance, while organisms resembling known xylose degraders increased. Improved understanding of the carboxylate platform's microbiology will help refine platform performance and contribute to our growing knowledge regarding biomass conversion and biofuel production processes. (orig.)

  13. The Star Formation History and Extended Structure of the Hercules Milky Way Satellite

    CERN Document Server

    Sand, D J; Willman, B; Zaritsky, D; Seth, A; Harris, J; Piatek, S; Saha, A

    2009-01-01

    We present imaging of the recently discovered Hercules Milky Way satellite and its surrounding regions to study its structure, star formation history and to thoroughly search for signs of disruption. We robustly determine the distance, luminosity, size and morphology of Hercules utilizing a bootstrap approach to characterize our uncertainties. We derive a distance to Hercules of $133 \\pm 6$ kpc via a comparison to empirical and theoretical isochrones. As previous studies have found, Hercules is very elongated, with $\\epsilon=0.67\\pm0.03$ and a half light radius of $r_{h} \\simeq 230$ pc. Using the color magnitude fitting package StarFISH, we determine that Hercules is old ($>12$ Gyr) and metal poor ($[Fe/H]\\sim-2.0$), with a spread in metallicity, in agreement with previous spectroscopic work. We infer a total absolute magnitude of $M_V=-5.3\\pm0.4$. Our innovative search for external Hercules structure both in the plane of the sky and along the line of sight yields some evidence that Hercules is embedded in a ...

  14. Cloud cover typing from environmental satellite imagery. Discriminating cloud structure with Fast Fourier Transforms (FFT)

    Science.gov (United States)

    Logan, T. L.; Huning, J. R.; Glackin, D. L.

    1983-01-01

    The use of two dimensional Fast Fourier Transforms (FFTs) subjected to pattern recognition technology for the identification and classification of low altitude stratus cloud structure from Geostationary Operational Environmental Satellite (GOES) imagery was examined. The development of a scene independent pattern recognition methodology, unconstrained by conventional cloud morphological classifications was emphasized. A technique for extracting cloud shape, direction, and size attributes from GOES visual imagery was developed. These attributes were combined with two statistical attributes (cloud mean brightness, cloud standard deviation), and interrogated using unsupervised clustering amd maximum likelihood classification techniques. Results indicate that: (1) the key cloud discrimination attributes are mean brightness, direction, shape, and minimum size; (2) cloud structure can be differentiated at given pixel scales; (3) cloud type may be identifiable at coarser scales; (4) there are positive indications of scene independence which would permit development of a cloud signature bank; (5) edge enhancement of GOES imagery does not appreciably improve cloud classification over the use of raw data; and (6) the GOES imagery must be apodized before generation of FFTs.

  15. Bridging scales from satellite to grains: Structural mapping aided by tablet and photogrammetry

    Science.gov (United States)

    Hawemann, Friedrich; Mancktelow, Neil; Pennacchioni, Giorgio; Wex, Sebastian; Camacho, Alfredo

    2016-04-01

    Bridging scales from satellite to grains: Structural mapping aided by tablet and photogrammetry A fundamental problem in small-scale mapping is linking outcrop observations to the large scale deformation pattern. The evolution of handheld devices such as tablets with integrated GPS and the availability of airborne imagery allows a precise localization of outcrops. Detailed structural geometries can be analyzed through ortho-rectified photo mosaics generated by photogrammetry software. In this study, we use a cheap standard Samsung-tablet (individual, up to 60 m long shear zones with the tracking option offered by the program Locus Map. Even though GPS accuracy is about 3 m, the relative error from one point to another during tracking is on the order of only about 1 dm. Parts of the shear zone with excellent outcrop are photographed with a standard camera with a relatively wide angle in a mosaic array. An area of about 30 sqm needs about 50 photographs with enough overlap to be used for photogrammetry. The software PhotoScan from Agisoft matches the photographs in a fully automated manner, calculates a 3D model of the outcrop, and has the option to project this as an orthophoto onto a flat surface. This allows original orientations of grain-scale structures to be recorded over areas on a scale up to tens to hundreds of metres. The photo mosaics can then be georeferenced with the aid of the GPS-tracks of the shear zones and included in a GIS. This provides a cheap recording of the structures in high detail. The great advantages over mapping with UAVs (drones) is the resolution (1cm), the independence from weather and energy source, and the low cost.

  16. Meteorological satellite systems

    CERN Document Server

    Tan, Su-Yin

    2014-01-01

    “Meteorological Satellite Systems” is a primer on weather satellites and their Earth applications. This book reviews historic developments and recent technological advancements in GEO and polar orbiting meteorological satellites. It explores the evolution of these remote sensing technologies and their capabilities to monitor short- and long-term changes in weather patterns in response to climate change. Satellites developed by various countries, such as U.S. meteorological satellites, EUMETSAT, and Russian, Chinese, Japanese and Indian satellite platforms are reviewed. This book also discusses international efforts to coordinate meteorological remote sensing data collection and sharing. This title provides a ready and quick reference for information about meteorological satellites. It serves as a useful tool for a broad audience that includes students, academics, private consultants, engineers, scientists, and teachers.

  17. A new multifunctional platform based on high aspect ratio interdigitated NEMS structures

    Energy Technology Data Exchange (ETDEWEB)

    Ghatnekar-Nilsson, S; Karlsson, I; Kvennefors, A; Luo, G; Zela, V; Parker, T; Litwin, A [NEMS AB, Solvegatan 16, S-223 62 Lund (Sweden); Arlelid, M [Electrical and Information Technology, Lund University, PO Box 118, S-221 00 Lund (Sweden); Montelius, L [Solid State Physics/The Nanometer Structure Consortium, Lund University, PO Box 118, S-221 00 Lund (Sweden)], E-mail: andrej.litwin@nems.se

    2009-04-29

    A multifunctional NEMS platform based on a mass-producible, surface relief grating has been developed and fabricated directly in polymer materials. The pattern consists of high aspect ratio interdigitated nanometer-sized pairs of walls and can be produced in a low-complexity one-step patterning process with nanoimprint lithography. In this paper, we demonstrate the usefulness of the platform primarily by showing an application as a high-sensitivity mass sensor in air. The sensors, which are based on the high frequency resonant response of around 200 MHz, show a mass responsivity of the order of 0.1 Hz/zg per wall at room temperature and in ambient air. Their ability to selectively adsorb airborne target molecules, such as thiols, is also demonstrated. We also show that the same device can function as a varactor for electronic circuits based on its large tunable capacitive range.

  18. A new multifunctional platform based on high aspect ratio interdigitated NEMS structures.

    Science.gov (United States)

    Ghatnekar-Nilsson, S; Karlsson, I; Kvennefors, A; Luo, G; Zela, V; Arlelid, M; Parker, T; Montelius, L; Litwin, A

    2009-04-29

    A multifunctional NEMS platform based on a mass-producible, surface relief grating has been developed and fabricated directly in polymer materials. The pattern consists of high aspect ratio interdigitated nanometer-sized pairs of walls and can be produced in a low-complexity one-step patterning process with nanoimprint lithography. In this paper, we demonstrate the usefulness of the platform primarily by showing an application as a high-sensitivity mass sensor in air. The sensors, which are based on the high frequency resonant response of around 200 MHz, show a mass responsivity of the order of 0.1 Hz/zg per wall at room temperature and in ambient air. Their ability to selectively adsorb airborne target molecules, such as thiols, is also demonstrated. We also show that the same device can function as a varactor for electronic circuits based on its large tunable capacitive range.

  19. Platform image processing to study the structural properties of retinal vessel

    Directory of Open Access Journals (Sweden)

    Miguel Ángel MERCHÁN

    2013-05-01

    Full Text Available This paper presents a technological platform specialized in assessing retinal vessel caliber and describing the relationship of the results obtained to cardiovascular risk. Retinal circulation is an area of active research by numerous groups, and there is general experimental agreement on the analysis of the patterns of the retinal blood vessels in the normal human retina. The development of automated tools designed to improve performance and decrease interobserver variability, therefore, appears necessary. 

  20. Vertical Structure of the Wind Speed Profile at the North Sea Offshore Measurement Platform FINO1

    Science.gov (United States)

    Kettle, A. J.

    2013-12-01

    The vertical wind speed profile in the lowest 100m of the marine atmospheric boundary layer has been characterized from data collected at the FINO1 offshore research platform in the German North Sea sector for 2005. Located in 30m of water, the platform has a dense vertical array of meteorological instrumentation to measure wind speed, air temperature, relative humidity, and atmospheric turbulence characteristics. Along measurements of the ocean temperature and surface waves, the platform is well-equipped to characterize wind properties in the near-surface boundary layer. Preliminary analysis reveals a high incidence of vertical wind speed profiles that deviate significantly from Monin-Obukhov similarity theory with wind speed inflections that suggest decoupled layers near the surface. The presentation shows how the properties of the vertical wind speed profile change mainly depending on the wind speed, wind direction, and time of year. The results are significant because there are few reports of inflections in the vertical wind speed profile over the ocean and there is an a priori assumption that the vertical wind speed profile varies smoothly according to similarity theory. There are possible consequences for the wind energy development in terms of understanding the forces acting on offshore wind turbines whose rotors sweep across heights 150-200m above the sea surface.

  1. Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration.

    Science.gov (United States)

    Gražulis, Saulius; Daškevič, Adriana; Merkys, Andrius; Chateigner, Daniel; Lutterotti, Luca; Quirós, Miguel; Serebryanaya, Nadezhda R; Moeck, Peter; Downs, Robert T; Le Bail, Armel

    2012-01-01

    Using an open-access distribution model, the Crystallography Open Database (COD, http://www.crystallography.net) collects all known 'small molecule / small to medium sized unit cell' crystal structures and makes them available freely on the Internet. As of today, the COD has aggregated ~150,000 structures, offering basic search capabilities and the possibility to download the whole database, or parts thereof using a variety of standard open communication protocols. A newly developed website provides capabilities for all registered users to deposit published and so far unpublished structures as personal communications or pre-publication depositions. Such a setup enables extension of the COD database by many users simultaneously. This increases the possibilities for growth of the COD database, and is the first step towards establishing a world wide Internet-based collaborative platform dedicated to the collection and curation of structural knowledge.

  2. Seasat-satellite investigation of the structure of western Nebraska and its application to the evaluation of geothermal resources

    Energy Technology Data Exchange (ETDEWEB)

    Stix, J.

    1982-03-01

    Seasat synthetic aperture radar (SAR) satellite imagery was used to interpret the structural framework and, indirectly, the geothermal potential of an area in western Nebraska. Lineaments were mapped from the imagery and then compared to known structure. It was found that Seasat does record surface manifestations of subtle basement structures, particularly faults and joints. Furthermore, two areas with hot dry rock geothermal potential were delineated using Seasat and other data. It is stressed that more subsurface geology and geophysical data are needed before a final evaluation of the geothermal potential can be made. Seasat imagery is a useful reconnaissance exploration tool in the interpretation of regional structure within areas of little topographic relief.

  3. Evolutionary Origin of Higher-Order Repeat Structure in Alpha-Satellite DNA of Primate Centromeres

    Science.gov (United States)

    Koga, Akihiko; Hirai, Yuriko; Terada, Shoko; Jahan, Israt; Baicharoen, Sudarath; Arsaithamkul, Visit; Hirai, Hirohisa

    2014-01-01

    Alpha-satellite DNA (AS) is a main DNA component of primate centromeres, consisting of tandemly repeated units of ∼170 bp. The AS of humans contains sequences organized into higher-order repeat (HOR) structures, in which a block of multiple repeat units forms a larger repeat unit and the larger units are repeated tandemly. The presence of HOR in AS is widely thought to be unique to hominids (family Hominidae; humans and great apes). Recently, we have identified an HOR-containing AS in the siamang, which is a small ape species belonging to the genus Symphalangus in the family Hylobatidae. This result supports the view that HOR in AS is an attribute of hominoids (superfamily Hominoidea) rather than hominids. A single example is, however, not sufficient for discussion of the evolutionary origin of HOR-containing AS. In the present study, we developed an efficient method for detecting signs of large-scale HOR and demonstrated HOR of AS in all the three other genera. Thus, AS organized into HOR occurs widely in hominoids. Our results indicate that (i) HOR-containing AS was present in the last common ancestor of hominoids or (ii) HOR-containing AS emerged independently in most or all basal branches of hominoids. We have also confirmed HOR occurrence in centromeric AS in the Hylobatidae family, which remained unclear in our previous study because of the existence of AS in subtelomeric regions, in addition to centromeres, of siamang chromosomes. PMID:24585002

  4. DIORAMA Model of Satellite Body Orientation

    Energy Technology Data Exchange (ETDEWEB)

    Werley, Kenneth Alan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-04

    The DIORAMA GPS satellite platform orientation model is described. Satellites need to keep sensors pointed towards the earth and solar panels oriented to face the sun (when not in the earth’s shadow) while they orbit the earth.

  5. The Research and Development of a Cavitating Water Jet Cleaning System for Removing Marine Growth and Fouling from Offshore Platform Structures.

    Science.gov (United States)

    1979-12-01

    AO-AO85 730 DAEOALEAN ASSOCIATES INC WOODBINE MD F/0 13/9 THE RESEARCH AND DEVELOPMENT OF A CAVITATING WATER JET CLEANING--TC(U) DEC 79 J T PARKER, W...REPORT THE RESEARCH AND DEVELOPMENT OF A CAVITATING WATER JET CLEANING SYSTEM FOR REMOVING MARINE GROWTH AND FOULING FROM OFFSHORE PLATFORM STRUCTURES...DEVELOPMENT OF A CAVITATING WATER JET CLEANING SYSTEM FOR REMOVING MARINE GROWTH AND FOULING FROM OFFSHORE PLATFORM STRUCTURES 1.0 INTRODUCTION Inspection of

  6. Communications payloads for geostationary platforms

    Science.gov (United States)

    Fordyce, S. W.

    1978-01-01

    Trends in communication satellites show increasing reuse of the frequency spectrum through multiple spot beams and orthogonal polarization, as well as consortia operation. Current reliance on orbital arc separation for frequency reuse may be inadequate for the projected traffic growth and the orbital slotting proposals before the ITU. This paper notes that cost advantages can accrue through common use of spacecraft subsystems and multiple users' platforms aboard a common geostationary platform. The rationale for such platforms is described and potential payloads are suggested.

  7. Climbing ripple structure and associated storm-lamination from a Proterozoic carbonate platform succession: Their environmental and petrogenetic significance

    Indian Academy of Sciences (India)

    Asru K Chaudhuri

    2005-06-01

    The Mesoproterozoic Pandikunta Limestone, a shallow water carbonate platform succession in the Pranhita–Godavari Valley, south India, displays well developed climbing ripple lamination and storm deposited structures, such as HCS, wave ripple-lamination, combined-flow ripple-lamination and low angle trough cross-stratification. Different types of stratification developed in calcisiltite with minor amounts of very fine quartz sand and silt. The climbing ripple structures exhibit a complex pattern of superposition of different types (type A, B and S) within cosets pointing to a fluctuating rate of suspension deposition versus bedform migration, and an unsteady character of the flow. Close association of climbing ripple structures, HCS with anisotropic geometry, wavy lamination and combined-flow ripple-lamination suggest that the structures were formed by storm generated combined-flow in a mid-shelf area above the storm wave base. The combined-flow that deposited the climbing ripple structures had a strong unidirectional flow component of variable magnitude. The climbing ripple structure occurs as a constituent of graded stratified beds with an ordered vertical sequence of different types of lamination, reflecting flow deceleration and increased rate of suspension deposition. It is inferred that the beds were deposited from high-density waning flows in the relatively deeper part of the ancient shelf. The structures indicate that the Pandikunta platform was subjected to open marine circulation and intense storm activities. The storm deposited beds, intercalated with beds of lime-mudstone, consist primarily of fine sand and silt size carbonate particles that were hydrodynamically similar to quartz silt. Detrital carbonate particles are structureless and are of variable roundness. The particles were generated as primary carbonate clasts in coastal areas by mechanical disintegration of rapidly lithified beds, stromatolites or laminites, and the finest grade was

  8. 铺板连接结构减振设计分析%Anti-Vibration Design for Platform Connection Structure

    Institute of Scientific and Technical Information of China (English)

    黄惜春; 陈美霞

    2012-01-01

    Based on the theory of heterogeneous structure vibration isolation, anti-vibration design on the connection structure of submarine platform was implemented. Some numerical models were established by using finite element method, and dynamic responses of excitation source under different situations of platform were discussed. Meanwhile, scale model test was also carried out. The results indicate that the U-shaped connection can attenuate the vibration from platform to inner hull effectively; When reducing the thickness of connection structure appropriately, the anti-vibration effect is increasing. Scale model test proves that the U-shaped connection has more than 4 dB vibration reduction in frequency range from 2 Hz to 4 kHz. The numerical results agree well with the model test.%为控制机械振动向船体结构传递,基于不均质结构振动隔离原理,对铺板连接结构进行减振设计.采用有限元方法建立各设计方案的计算模型,进行激励源在铺板不同位置工况下的动响应分析,对比各方案的减振效果并开展缩比模型试验.分析结果表明,U形连接结构对抑制振动从铺板向圆柱壳体传递效果较好;适当减小连接板厚度,减振效果呈增加的趋势.缩比模型测试结果显示,U形连接结构在2 Hz~4 kHz频段有大于4dB的减振效果,仿真计算结果与试验结果吻合较好.

  9. Integrated Satellite-HAP Systems

    DEFF Research Database (Denmark)

    Cianca, Ernestina; De Sanctis, Mauro; De Luise, Aldo

    2005-01-01

    for an efficient hybrid terrestrial-satellite communication system. Two integrated HAP-satellite scenarios are presented, in which the HAP is used to overcome some of the shortcomings of satellite- based communications. Moreover, it is shown that the integration of HAPs with satellite systems can be used......Thus far, high-altitude platform (HAP)-based systems have been mainly conceived as an alternative to satellites for complementing the terrestrial network. This article aims to show that HAP should no longer be seen as a competitor technology by investors of satellites, but as a key element...

  10. Structured DC Electric Fields With and Without Associated Plasma Density Gradients Observed with the C/NOFS Satellite

    Science.gov (United States)

    Pfaff, R.; Rowland, D.; Klenzing, J.; Freudenreich, H.; Bromund, K.; Liebrecht, C.; Roddy, P.; Hunton, D.

    2009-01-01

    DC electric field observations and associated plasma drifts gathered with the Vector Electric Field Investigation on the Air Force Communication/Navigation Outage Forecasting System (C/NOFS) satellite typically reveal considerable variation at large scales (approximately 100's of km), in both daytime and nighttime cases, with enhanced structures usually confined to the nightside. Although such electric field structures are typically associated with plasma density depletions and structures, as observed by the Planar Langmuir Probe on C/NOFS, what is surprising is the number of cases in which large amplitude, structured DC electric fields are observed without a significant plasma density counterpart structure, including their appearance at times when the ambient plasma density appears relatively quiescent. We investigate the relationship of such structured DC electric fields and the ambient plasma density in the C/NOFS satellite measurements observed thus far, taking into account both plasma density depletions and enhancements. We investigate the mapping of the electric fields along magnetic field lines from distant altitudes and latitudes to locations where the density structures, which presumably formed the original seat of the electric fields, are no longer discernible in the observations. In some cases, the electric field structures and spectral characteristics appear to mimic those associated with equatorial spread-F processes, providing important clues to their origins. We examine altitude, seasonal, and longitudinal effects in an effort to establish the origin of such structured DC electric fields observed both with, and without, associated plasma density gradients

  11. Seismic stratigraphy and structure of the area to the southeast of the trobriand platform

    Science.gov (United States)

    Francis, G.; Lock, J.; Okuda, Y.

    1987-09-01

    The area to the southeast of the Trobriand Platform contains an easterly continuation of the Oligocene to Quaternary Cape Vogel Basin (CVB). Within this area, three major seismic sequences are recognized: sea bed-A, A B, and B D. The latter sequence occurs within a depocenter with approximately 3,200 m of sediment. The A B and B D sequences were faulted and gently folded in Late Miocene times. To the south and southeast of this depocenter the CVB has been truncated by the Pliocene opening of the Woodlark Basin, an active westward-propagating spreading system.

  12. An Overview Of Operational Satellites Built By China:Communications Satellites (Part 2)

    Institute of Scientific and Technical Information of China (English)

    Zong He

    2009-01-01

    @@ INNOVATIVE GENERATION: THE DFH-4 PLATFORM AND SATELLITES The DFH-4 platform is the third generation of China-built large geostationary satellite platform with large output power,payload capacity and long service lifetime.Its overall performance ranks with other international advanced satellite platforms.This platform can be used for many services such as high capacity broadcast communication,direct TV broadcasting,digital audio broadcasting and broadband multimedia,which are badly needed for national economic construction and markets both at home and abroad.The platform also has effective technologies that can ensure the security of information transmission.

  13. Small-scale structure of the geodynamo inferred from Ørsted and Magsat satellite data

    DEFF Research Database (Denmark)

    Hulot, G.; Eymin, C.; Langlais, B.;

    2002-01-01

    The 'geodynamo' in the Earth's liquid outer core produces a magnetic field that dominates the large and medium length scales of the magnetic field observed at the Earth's surface(1,2). Here we use data from the currently operating Danish Oersted(3) satellite, and from the US Magsat(2) satellite...... observed in the palaeomagnetic field(7-10). We postulate that it might also be a state in which the geodynamo operates before reversing....

  14. Structural design and analysis of a solar array substrate for a GEO satellite

    OpenAIRE

    Safak, Omer

    2013-01-01

    The aim of this thesis is the design of solar array substrate for a geostationary satellite. The design of deployable solar array substrate is realized based on the requirements which are provided by BILUZAY (Bilkent University Space Technologies Research Centre). This array is going to empower a telecommunication satellite which will be operating in a geostationary orbit during 15 years. The main work presented in this thesis consists of two principal directions: solar cell array area dimens...

  15. Structural design and analysis of a solar array substrate for a GEO satellite

    OpenAIRE

    Safak, Omer

    2013-01-01

    The aim of this thesis is the design of solar array substrate for a geostationary satellite. The design of deployable solar array substrate is realized based on the requirements which are provided by BILUZAY (Bilkent University Space Technologies Research Centre). This array is going to empower a telecommunication satellite which will be operating in a geostationary orbit during 15 years. The main work presented in this thesis consists of two principal directions: solar cell array area dimens...

  16. Integrated Propulsion and Primary Structure Module for Small Satellite and CubeSat Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the last decade, the CubeSat platform has emerged as a viable alternative for both innovative technology development and scientific investigation. However, to...

  17. Multiple-pairwise image correlation for the detection and monitoring of slow-moving landslides from optical satellite image time-series: the MPIC service of the ESA Geohazards Exploitation Platform (GEP)

    Science.gov (United States)

    Stumpf, André; Michéa, David; Malet, Jean-Philippe

    2017-04-01

    Slow-moving landslides are widespread in many landscapes with significant impacts on the topographic relief, sediment transfer and human settlements. While in situ geophysical methods and terrestrial remote sensing are indispensable for a detailed monitoring and understanding of individual landslides, their area-wide mapping and monitoring is still challenging. SAR interferometry has proven useful for the detection and monitoring of very slow movements (< 1.6 m.yr-1) but limitations are encountered for the investigation of slow-moving landslides (1.6 m.yr-1 - 30 m.month-1). Such limitations can be addressed through the analysis of archives of optical remote sensing images. To make better use of the increasingly available optical time-series, this study proposes a multiple pairwise image correlation (MPIC) technique for the analysis of optical satellite image time-series. The processing technique generates stacks of partially redundant horizontal displacement fields and computes multi-temporal indicators for a more accurate detection and quantification of surface displacement. The processing technique is implemented as an on-line processing service on the ESA Geohazards Exploitation Platform (GEP) to allow, for selected users, the analysis of satellite optical time-series. The MPIC service (parallelized algorithm, processing chain, user modes) is presented in detail through examples of processing of time-series of very-high resolution (Pléiades) and high-resolution (Sentinel-2) satellite images at study sites in France, Italy and North America. The accuracy of the derived inventories and displacement time-series and their implications for the understanding of the seasonal landslide dynamics are discussed.

  18. Three-dimensional structure of aerosol in China: A perspective from multi-satellite observations

    Science.gov (United States)

    Guo, Jianping; Liu, Huan; Wang, Fu; Huang, Jingfeng; Xia, Feng; Lou, Mengyun; Wu, Yerong; Jiang, Jonathan H.; Xie, Tao; Zhaxi, Yangzong; Yung, Yuk L.

    2016-09-01

    Using eight years (2006-2014) of passive (MODIS/Aqua and OMI/Aura) and active (CALIOP/CALIPSO) satellite measurements of aerosols, we yield a three-dimensional (3D) distribution of the frequency of occurrence (FoO) of aerosols over China. As an indicator of the vertical heterogeneity of aerosol layers detected by CALIOP, two types of Most Probable Height (MPH), including MPH_FoO and MPH_AOD, are deduced. The FoO of "Total Aerosol" reveals significant geographical dependence. Eastern China showed much stronger aerosol FoD than northwestern China. The FoO vertical structures of aerosol layer are strongly dependent on altitudes. Among the eight typical ROIs analyzed, aerosol layers over the Gobi Desert have the largest occurrence probability located at an altitude as high as 2.83 km, as compared to 1.26 km over Beijing-Tianjin-Hebei. The diurnal variation (nighttime-daytime) in MPH_AOD varies from an altitude as low as 0.07 km over the Sichuan basin to 0.27 km over the Gobi Desert, whereas the magnitude of the diurnal variation in terms of MPH_AOD is six times as large as the MPH_FoO, mostly attributable to the day/night lidar SNR difference. Also, the 3D distribution of dust and smoke aerosols was presented. The multi-sensor synergized 3D observations of dust aerosols, frequently observed in the zonal belt of 38°N-45°N, is markedly different from that of smoke aerosols that are predominantly located in the eastern and southern parts. The 3D FoO distribution of dust indicates a west-to-east passageway of dust originating from the westernmost Taklimakan Desert all the way to North China Plain (NCP). The findings from the multi-sensor synergetic observations greatly improved our understanding on the long-range aerosol dispersion, transport and passageway over China.

  19. 卫星虚拟热试验平台建模工具模块研究%Tool module for modelling satellite virtual thermal test platform

    Institute of Scientific and Technical Information of China (English)

    曹志松; 刘绍然; 裴一飞

    2012-01-01

    为预示卫星热试验结果,给热试验设计提供参考,北京卫星环境工程研究所自主研发了卫星虚拟热试验平台.文章介绍了虚拟热试验平台中建模工具模块的建模思想、对象组合策略和数据存储方法;其中数据存储方法采用预排序遍历树算法,相比于传统的邻接列表模式,具有更高的查询效率;最后还介绍了基于本建模工具模块的红外加热笼建模方法.%The virtual thermal test platform is developed to predict the results of a real thermal test, and therefore it can be used to design the real thermal test. The modeling method, the object combination strategy, and the data storage scheme of the modeling tool module for the virtual thermal test platform are analyzed. The model data are stored in the datasheet and queried by using a modified preordered tree traversal algorithm. This algorithm is more efficient, as compared to the adjacency list model. Finally, a method of modeling the infrared cage based on the modeling tool module is presented.

  20. 基于短消息平台的气象卫星业务维护管理系统%Business maintenance management system for meteorological satellite based on short message service platform

    Institute of Scientific and Technical Information of China (English)

    郭强; 谢利子; 赵磊; 康宁; 冯小虎

    2014-01-01

    为满足静止气象卫星地面应用系统的运行管理需求,保证业务系统的高可靠性和维护响应的高时效性,设计了一套基于短消息平台的业务维护管理系统。该系统由短消息平台、实时业务监测和自动维护管理三部分组成,能够实时监测多套卫星系统的业务关键点,及时发现业务故障和特殊事件,利用短消息平台实现消息的集中管理和即时发送,同时具备故障策略管理、维护调度管理和自动化维护响应等功能。实施效果表明该系统具备良好的适用性和可扩展性,能有效减轻维护管理人员的工作压力,为高时效和高可靠要求的大型系统维护管理工作提供有效的技术手段。%In order to meet the operation management requirement of geostationary meteorological satellite ground application system, the authors proposed a business maintenance management system based on short message service platform to guarantee high reliability of business system and high efficiency of maintenance response. The functions of this system included short message service platform, real-time monitoring and automatic maintenance management. The system can provide real-time monitoring service for multiple satellite systems, discover business faults and special events in time, and send the messages through short message service platform. It also has fault strategy management, maintenance dispatching management and automatic response functions. The application results show that the system has good extensibility and maintainability, can effectively reduce the pressure of maintenance personnel, and provide effective technical approach for maintenance management work of high reliability and high efficiency system.

  1. Automated Building Extraction from High-Resolution Satellite Imagery in Urban Areas Using Structural, Contextual, and Spectral Information

    Directory of Open Access Journals (Sweden)

    Curt H. Davis

    2005-08-01

    Full Text Available High-resolution satellite imagery provides an important new data source for building extraction. We demonstrate an integrated strategy for identifying buildings in 1-meter resolution satellite imagery of urban areas. Buildings are extracted using structural, contextual, and spectral information. First, a series of geodesic opening and closing operations are used to build a differential morphological profile (DMP that provides image structural information. Building hypotheses are generated and verified through shape analysis applied to the DMP. Second, shadows are extracted using the DMP to provide reliable contextual information to hypothesize position and size of adjacent buildings. Seed building rectangles are verified and grown on a finely segmented image. Next, bright buildings are extracted using spectral information. The extraction results from the different information sources are combined after independent extraction. Performance evaluation of the building extraction on an urban test site using IKONOS satellite imagery of the City of Columbia, Missouri, is reported. With the combination of structural, contextual, and spectral information, 72.7% of the building areas are extracted with a quality percentage 58.8%.

  2. Understanding the structural mechanisms of antibiotic resistance sets the platform for new discovery.

    Science.gov (United States)

    Reeve, Stephanie M; Lombardo, Michael N; Anderson, Amy C

    2015-01-01

    Understanding the structural basis of antibacterial resistance may enable rational design principles that avoid and subvert that resistance, thus leading to the discovery of more effective antibiotics. In this review, we explore the use of crystal structures to guide new discovery of antibiotics that are effective against resistant organisms. Structures of efflux pumps bound to substrates and inhibitors have aided the design of compounds with lower affinity for the pump or inhibitors that more effectively block the pump. Structures of β-lactamase enzymes have revealed the mechanisms of action toward key carbapenems and structures of gyrase have aided the design of compounds that are less susceptible to point mutations.

  3. Handling of subpixel structures in the application of satellite derived irradiance data for solar energy system analysis - a review

    Science.gov (United States)

    Beyer, Hans Georg

    2016-04-01

    With the increasing availability of satellite derived irradiance information, this type of data set is more and more in use for the design and operation of solar energy systems, most notably PV- and CSP-systems. By this, the need for data measured on-site is reduced. However, due to basic limitations of the satellite-derived data, several requirements put by the intended application cannot be coped with this data type directly. Traw satellite information has to be enhanced in both space and time resolution by additional information to be fully applicable for all aspects of the modelling od solar energy systems. To cope with this problem, several individual and collaborative projects had been performed in the recent years or are ongoing. Approaches are on one hand based on pasting synthesized high-resolution data into the low-resolution original sets. Pre-requite is an appropriate model, validated against real world data. For the case of irradiance data, these models can be extracted either directly from ground measured data sets or from data referring to the cloud situation as gained from the images of sky cameras or from monte -carlo initialized physical models. The current models refer to the spatial structure of the cloud fields. Dynamics are imposed by moving the cloud structures according to a large scale cloud motion vector, either extracted from the dynamics interfered from consecutive satellite images or taken from a meso-scale meteorological model. Dynamic irradiance information is then derived from the cloud field structure and the cloud motion vector. This contribution, which is linked to subtask A - Solar Resource Applications for High Penetration of Solar Technologies - of IEA SHC task 46, will present the different approaches and discuss examples in view of validation, need for auxiliary information and respective general applicability.

  4. Cibola flight experiment satellite

    Science.gov (United States)

    Davies, P.; Liddle, Doug; Paffett, John; Sweeting, Martin; Curiel, A.; Sun, Wei; Eves, Stuart

    2004-11-01

    In order to achieve an "economy of scale" with respect to payload capacity the major trend in telecommunications satellites is for larger and larger platforms. With these large platforms the level of integration between platform and payload is increasing leading to longer delivery schedules. The typical lifecycle for procurement of these large telecommunications satellites is now 3-6 years depending on the level of non-recurring engineering needed. Surrey Satellite Technology Ltd (SSTL) has designed a low-cost platform aimed at telecommunications and navigation applications. SSTL's Geostationary Minisatellite Platform (GMP) is a new entrant addressing the lower end of the market with payloads up to 250kg requiring less than 1.5 kW power. The British National Space Centre through the MOSAIC Small Satellite Initiative supported the development of GMP. The main design goals for GMP are low-cost for the complete mission including launch and operations and a platform allowing flexible payload accommodation. GMP is specifically designed to allow rapid development and deployment with schedules typically between 1 and 2 years from contract signature to flight readiness. GMP achieves these aims by a modular design where the level of integration between the platform and payload is low. The modular design decomposes the satellite into three major components - the propulsion bay, the avionics bay and the payload module. Both the propulsion and avionics bays are reusable, largely unchanged, and independent of the payload configuration. Such a design means that SSTL or a 3rd party manufacturer can manufacture the payload in parallel to the platform with integration taking place quite late in the schedule. In July 2003 SSTL signed a contract for ESA's first Galileo navigation satellite known as GSTBV2/A. The satellite is based on GMP and ESA plan to launch it into a MEO orbit late in 2005. The second flight of GMP is likely to be in 2006 carrying a geostationary payload

  5. Inspection of Pole-Like Structures Using a Visual-Inertial Aided VTOL Platform with Shared Autonomy

    Directory of Open Access Journals (Sweden)

    Inkyu Sa

    2015-09-01

    Full Text Available This paper presents an algorithm and a system for vertical infrastructure inspection using a vertical take-off and landing (VTOL unmanned aerial vehicle and shared autonomy. Inspecting vertical structures such as light and power distribution poles is a difficult task that is time-consuming, dangerous and expensive. Recently, micro VTOL platforms (i.e., quad-, hexa- and octa-rotors have been rapidly gaining interest in research, military and even public domains. The unmanned, low-cost and VTOL properties of these platforms make them ideal for situations where inspection would otherwise be time-consuming and/or hazardous to humans. There are, however, challenges involved with developing such an inspection system, for example flying in close proximity to a target while maintaining a fixed stand-off distance from it, being immune to wind gusts and exchanging useful information with the remote user. To overcome these challenges, we require accurate and high-update rate state estimation and high performance controllers to be implemented onboard the vehicle. Ease of control and a live video feed are required for the human operator. We demonstrate a VTOL platform that can operate at close-quarters, whilst maintaining a safe stand-off distance and rejecting environmental disturbances. Two approaches are presented: Position-Based Visual Servoing (PBVS using an Extended Kalman Filter (EKF and estimator-free Image-Based Visual Servoing (IBVS. Both use monocular visual, inertia, and sonar data, allowing the approaches to be applied for indoor or GPS-impaired environments. We extensively compare the performances of PBVS and IBVS in terms of accuracy, robustness and computational costs. Results from simulations Sensors 2015, 15 22004 and indoor/outdoor (day and night flight experiments demonstrate the system is able to successfully inspect and circumnavigate a vertical pole.

  6. Lithospheric structure of the Eastern Iranian plateau from integrated geophysical modeling: A transect from Makran to the Turan platform

    Science.gov (United States)

    Entezar-Saadat, Vahid; Motavalli-Anbaran, Seyed-Hani; Zeyen, Hermann

    2017-05-01

    We present a 2D profile of density and temperature distribution in the lithosphere across Iran along a more than 1600 km long profile extending from the Oman Gulf in the South to the Kopeh-Dagh and the Turan platform in the North. Gravity, geoid, topography and surface heat flow data were used for modeling, assuming local isostatic equilibrium. As much as possible, crustal structure has been constrained by seismic data. Crustal thickening is found under the Taftan-Bazman volcanic-arc (up to 47 km), under the Binalud foreland (∼54 km) and beneath the Kopeh-Dagh mountains (up to 50 km) whereas thin crust has been obtained under the Oman Gulf (20 km). Moho depth under the Lut block and the Turan platform is about 40 km. The lithospheric thickness is ∼90 km under the Oman Gulf and increases slightly until the Jazmourian depression. Then the lithospheric-asthenospheric boundary (LAB) bends significantly and sinks to ∼260 km under the Taftan-Bazman volcanic-arc. The LAB depth is about 190 km beneath the Lut block. A slight increase of LAB depth under the Binalud foreland towards the North may indicate a suture zone. Under the Turan platform, the LAB depth reaches ∼210 km. We also modeled two possible positions of the deep suture zone in NE Iran (along the main Kopeh-Dagh fault or along the Atrak River) and concluded that, when the suture zone is along the Atrak River, we obtained the better fit between calculated and measured data.

  7. Coherence and phase structure of compressional ULF waves at low-Earth-orbit observed by the Swarm satellites

    Science.gov (United States)

    Heilig, Balázs; Sutcliffe, Peter R.

    2016-04-01

    Different types of ultra low frequency (ULF waves), such as dayside compressional Pc3-Pc4 waves, Pc2 and Pc1 waves, Pc3-Pc4 field line resonances, night side and day side Pi2s, etc. have been successfully identified in the topside ionosphere. ULF observations in this region can help us to understand the wave structure in the magnetosphere, wave propagation, and also the effects of the ionosphere (transmission, reflection, mode conversion). Because of the fast orbiting of the LEO satellites Fourier analysis is not applicable, special techniques (wavelet analysis, maximum entropy method) are needed to resolve ULF signals, as well as to discriminate between spatial and wave structures. In this paper we present results of a study of Pc3 compressional waves observed at low-Earth-orbit (LEO) by the Swarm satellites. The particular emphasis has been to investigate the distribution of wave coherence and phase difference as functions of magnetic latitude and local time. This is the first time that a study of this nature has been carried out using magnetic field data from multiple LEO satellites. We believe that our study provides the first observational evidence to support the prediction by the inductive thin ionosphere model that incident Alfvén mode waves are partially converted into compressional mode waves by the ionosphere.

  8. The Submillimeter Wave Astronomy Satellite (SWAS) solar array system

    Science.gov (United States)

    Sneiderman, Gary

    1993-01-01

    The SWAS (Submillimeter Wave Astronomy Satellite) solar array system is described. It is an innovative approach to meet the missions requirements. The SWAS satellite provides a three axis stabilized platform to survey a variety of galactic cloud structures. This system includes highly reliable, lightweight launch latch, deployment, and lock mechanisms, and solar array panels that provide the maximum solar cell area. The design of the solar arrays are the result of system trades that included instrument and spacecraft thermal constraints, attitude control system maneuvering rates and pointing accuracies, the power system, and the spacecraft structure.

  9. HPCC Methodologies for Structural Design and Analysis on Parallel and Distributed Computing Platforms

    Science.gov (United States)

    Farhat, Charbel

    1998-01-01

    In this grant, we have proposed a three-year research effort focused on developing High Performance Computation and Communication (HPCC) methodologies for structural analysis on parallel processors and clusters of workstations, with emphasis on reducing the structural design cycle time. Besides consolidating and further improving the FETI solver technology to address plate and shell structures, we have proposed to tackle the following design related issues: (a) parallel coupling and assembly of independently designed and analyzed three-dimensional substructures with non-matching interfaces, (b) fast and smart parallel re-analysis of a given structure after it has undergone design modifications, (c) parallel evaluation of sensitivity operators (derivatives) for design optimization, and (d) fast parallel analysis of mildly nonlinear structures. While our proposal was accepted, support was provided only for one year.

  10. Protein-Assisted Assembly of Modular 3D Plasmonic Raspberry-like Core/Satellite Nanoclusters: Correlation of Structure and Optical Properties.

    Science.gov (United States)

    Höller, Roland P M; Dulle, Martin; Thomä, Sabrina; Mayer, Martin; Steiner, Anja Maria; Förster, Stephan; Fery, Andreas; Kuttner, Christian; Chanana, Munish

    2016-06-28

    We present a bottom-up assembly route for a large-scale organization of plasmonic nanoparticles (NPs) into three-dimensional (3D) modular assemblies with core/satellite structure. The protein-assisted assembly of small spherical gold or silver NPs with a hydrophilic protein shell (as satellites) onto larger metal NPs (as cores) offers high modularity in sizes and composition at high satellite coverage (close to the jamming limit). The resulting dispersions of metal/metal nanoclusters exhibit high colloidal stability and therefore allow for high concentrations and a precise characterization of the nanocluster architecture in dispersion by small-angle X-ray scattering (SAXS). Strong near-field coupling between the building blocks results in distinct regimes of dominant satellite-to-satellite and core-to-satellite coupling. High robustness against satellite disorder was proved by UV/vis diffuse reflectance (integrating sphere) measurements. Generalized multiparticle Mie theory (GMMT) simulations were employed to describe the electromagnetic coupling within the nanoclusters. The close correlation of structure and optical property allows for the rational design of core/satellite nanoclusters with tailored plasmonics and well-defined near-field enhancement, with perspectives for applications such as surface-enhanced spectroscopies.

  11. History and structures of telecommunication in pathology, focusing on open access platforms

    Directory of Open Access Journals (Sweden)

    Kayser Klaus

    2011-11-01

    Full Text Available Abstract Background Telecommunication has matured to a broadly applied tool in diagnostic pathology. Technology and Systems Contemporary with the development of fast electronic communication lines (Integrated digital network services (ISDN, broad band connections, and fibre optics, as well as the digital imaging technology (digital camera, telecommunication in tissue - based diagnosis (telepathology has matured. Open access (internet and server - based communication have induced the development of specific medical information platforms, such as iPATH, UICC-TPCC (telepathology consultation centre of the Union International against Cancer, or the Armed Forces Institute of Pathology (AFIP teleconsultation system. They have been closed, and are subject to be replaced by specific open access forums (Medical Electronic Expert Communication System (MECES with embedded virtual slide (VS technology. MECES uses php language, data base driven mySqL architecture, X/L-AMPP infrastructure, and browser friendly W3C conform standards. Experiences The server - based medical communication systems (AFIP, iPATH, UICC-TPCC have been reported to be a useful and easy to handle tool for expert consultation. Correct sampling and evaluation of transmitted still images by experts reported revealed no or only minor differences to the original images and good practice of the involved experts. β tests with the new generation medical expert consultation systems (MECES revealed superior results in terms of performance, still image viewing, and system handling, especially as this is closely related to the use of so - called social forums (facebook, youtube, etc.. Benefits and Expectations In addition to the acknowledged advantages of the former established systems (assistance of pathologists working in developing countries, diagnosis confirmation, international information exchange, etc., the new generation offers additional benefits such as acoustic information transfer

  12. History and structures of telecommunication in pathology, focusing on open access platforms.

    Science.gov (United States)

    Kayser, Klaus; Borkenfeld, Stephan; Djenouni, Amina; Kayser, Gian

    2011-11-07

    Telecommunication has matured to a broadly applied tool in diagnostic pathology. Contemporary with the development of fast electronic communication lines (Integrated digital network services (ISDN), broad band connections, and fibre optics, as well as the digital imaging technology (digital camera), telecommunication in tissue--based diagnosis (telepathology) has matured. Open access (internet) and server--based communication have induced the development of specific medical information platforms, such as iPATH, UICC-TPCC (telepathology consultation centre of the Union International against Cancer), or the Armed Forces Institute of Pathology (AFIP) teleconsultation system. They have been closed, and are subject to be replaced by specific open access forums (Medical Electronic Expert Communication System (MECES) with embedded virtual slide (VS) technology). MECES uses php language, data base driven mySqL architecture, X/L-AMPP infrastructure, and browser friendly W3C conform standards. The server--based medical communication systems (AFIP, iPATH, UICC-TPCC) have been reported to be a useful and easy to handle tool for expert consultation. Correct sampling and evaluation of transmitted still images by experts reported revealed no or only minor differences to the original images and good practice of the involved experts. β tests with the new generation medical expert consultation systems (MECES) revealed superior results in terms of performance, still image viewing, and system handling, especially as this is closely related to the use of so--called social forums (facebook, youtube, etc.). In addition to the acknowledged advantages of the former established systems (assistance of pathologists working in developing countries, diagnosis confirmation, international information exchange, etc.), the new generation offers additional benefits such as acoustic information transfer, assistance in image screening, VS technology, and teaching in diagnostic sampling, judgement

  13. A Framework for Assessing Soil Moisture Deficit and Crop Water Stress at Multiple Space and Time Scales Under Climate Change Scenarios Using Model Platform, Satellite Remote Sensing, and Decision Support System

    KAUST Repository

    Mohanty, Binayak P.

    2016-11-03

    Better understanding of water cycle at different space–time scales would be a key for sustainable water resources, agricultural production, and ecosystems health in the twenty-first century. Efficient agricultural water management is necessary for sustainability of the growing global population. This warrants better predictive tools for aridity (based on precipitation, temperature, land use, and land cover), root zone (~top 1 m) soil moisture deficit, and crop water stress at farm, county, state, region, and national level, where decisions are made to allocate and manage the water resources. It will provide useful strategies for not only efficient water use but also for reducing potential risk of crop failure due to agricultural drought. Leveraging heavily on ongoing multiscale hydrologic modeling, data assimilation, soil moisture dynamics, and inverse model development research activities, and ongoing Land Data Assimilation (LDAS) and National Climate Assessment (NCA) indexing efforts we are developing a drought assessment framework. The drought assessment platform includes: (1) developing disaggregation methods for extracting various field-scale (1-km or less) climate indicators from the (SMOS, VIIRS, SMAP, AMSR-2) satellite / LDAS-based soil moisture in conjunction with a multimodel simulation–optimization approach using ensemble of Soil Vegetation Atmosphere Transfer, SVAT (Noah, CLM, VIC, Mosaic in LIS) models; (2) predicting farm/field-scale long-term root zone soil moisture status under various land management and climate scenarios for the past decades in hindcast mode and for the next decades in forecast mode across the USA using effective land surface parameters and meteorological input from Global Circulation Model (GCM) outputs; (3) assessing the potential risk of agricultural drought at different space–time scales across the USA based on predicted root zone soil moisture; and (4) evaluating various water management and cropping practices (e

  14. Application of in situ diffraction in high-throughput structure determination platforms.

    Science.gov (United States)

    Aller, Pierre; Sanchez-Weatherby, Juan; Foadi, James; Winter, Graeme; Lobley, Carina M C; Axford, Danny; Ashton, Alun W; Bellini, Domenico; Brandao-Neto, Jose; Culurgioni, Simone; Douangamath, Alice; Duman, Ramona; Evans, Gwyndaf; Fisher, Stuart; Flaig, Ralf; Hall, David R; Lukacik, Petra; Mazzorana, Marco; McAuley, Katherine E; Mykhaylyk, Vitaliy; Owen, Robin L; Paterson, Neil G; Romano, Pierpaolo; Sandy, James; Sorensen, Thomas; von Delft, Frank; Wagner, Armin; Warren, Anna; Williams, Mark; Stuart, David I; Walsh, Martin A

    2015-01-01

    Macromolecular crystallography (MX) is the most powerful technique available to structural biologists to visualize in atomic detail the macromolecular machinery of the cell. Since the emergence of structural genomics initiatives, significant advances have been made in all key steps of the structure determination process. In particular, third-generation synchrotron sources and the application of highly automated approaches to data acquisition and analysis at these facilities have been the major factors in the rate of increase of macromolecular structures determined annually. A plethora of tools are now available to users of synchrotron beamlines to enable rapid and efficient evaluation of samples, collection of the best data, and in favorable cases structure solution in near real time. Here, we provide a short overview of the emerging use of collecting X-ray diffraction data directly from the crystallization experiment. These in situ experiments are now routinely available to users at a number of synchrotron MX beamlines. A practical guide to the use of the method on the MX suite of beamlines at Diamond Light Source is given.

  15. Seismic Performance and Ice-Induced Vibration Control of Offshore Platform Structures Based on the ISO-PFD-SMA Brace System

    Directory of Open Access Journals (Sweden)

    Jigang Zhang

    2017-01-01

    Full Text Available Pall-typed frictional damper (PFD has higher capacity of energy dissipation, whereas shape memory alloy (SMA has excellent superelastic performance. Therefore, combining PFD and SMA together as a brace system has a great prospect in vibration control of structures. This paper investigates the performance of offshore platform with three structural configurations including the SMA brace system, the ISO-SMA (where ISO stands for isolation brace system, and the ISO-PFD-SMA brace system, which are subjected to seismic and ice-induced excitations. In this study, PFD-SMA brace system is installed on the isolation layer of jacket platform, which is under earthquake excitations and ice loading. Then, the reduction of vibration is evaluated by using ANSYS program. The results show that the PFD-SMA brace system is useful in reducing the seismic response and ice-induced response of offshore platform structures; meanwhile, it also demonstrates excellent energy dissipation and hysteretic behavior.

  16. Collapse of modern carbonate platform margins

    Energy Technology Data Exchange (ETDEWEB)

    Mullins, H.T.; Hine, A.C.; Gardulski, A.

    1985-01-01

    Modern carbonate platform margins in the Florida-Bahama region have been viewed as depositional or constructional features. However, recent studies have shown that carbonate escarpments, such as the Blake-Bahama and West Florida Escarpments, are erosional in origin where the platform margins have a scalloped or horse-shoe shape. Seismic reflection data from one of these crescentic features along the west Florida platform margin indicate that it originated by large scale gravity collapse (slump). This collapse structure extends for at least 120 km along the margin and has removed about 350 m of strata as young as early Neogene. Although at least three generations of slope failure are recognized, catastrophic collapse appears to have occurred in the mid-Miocene. Gravitational instability due to high rates of sediment accumulation may have been the triggering mechanism. These data suggest that submarine slumping is an important process in the retreat of limestone escarpments and in the generation of carbonate megabreccia debris flows. Scalloped platform margins occur on satellite images of northern Exuma Sound and Columbus Basin in the Bahamas. The authors suggest that large-scale submarine slumping can cause elongation of structurally controlled intraplatform basins (Exuma South), and produce anomalous horse-shoe shaped basins (Columbus Basin) by mega-collapse processes.

  17. Platform Constellations

    DEFF Research Database (Denmark)

    Staykova, Kalina Stefanova; Damsgaard, Jan

    2016-01-01

    This research paper presents an initial attempt to introduce and explain the emergence of new phenomenon, which we refer to as platform constellations. Functioning as highly modular systems, the platform constellations are collections of highly connected platforms which co-exist in parallel...... and as such allow us to study platforms not only as separate entities, but also to investigate the relationship between several platforms offered and governed by one and the same platform provider. By investigating two case studies of indigenous platform constellations formed around the hugely popular instant...... messaging apps KakaoTalk and LINE, we are able to gain valuable insights about the nature of these new constructions and to capture and synthesize their main characteristics in a framework. Our results show that platform constellations possess unique innovative capabilities, which can improve users...

  18. Optical and thermal properties of periodic photonic structures on a silicon-on-insulator platform

    Science.gov (United States)

    Song, Weiwei

    Silicon photonics is the leading candidate to fulfill the high bandwidth requirement for the future communication networks. Periodic photonic structures, due to their fascinating properties including compact size, high efficiency, and ease of design, play an important role in photonic systems. In this dissertation, SOI-based one-dimensional and two-dimensional periodic photonic structures are studied. Low crosstalk, high density integration of bus waveguides is demonstrated by employing a novel waveguide array structure. Inspired by the low coupling strength shown by initial pair waveguide experiments, novel waveguide array structures are studied by generalizing the nearest-neighbor tight-bonding model. Based on the theory, waveguide arrays have been designed and fabricated. The waveguide arrays have been characterized to demonstrate high density bus waveguides with minimal crosstalk. Two-dimensional photonic crystal waveguide (PCW) structure was then investigated aiming at reducing the propagation loss. A general cross-sectional eigenmode orthogonality relation is first derived for a one dimensional periodic system. Assisted by this orthogonality, analytic formulas are obtained to describe the propagation loss in PCW structures. By introducing the radiation and backscattering loss factors alpha1 and alpha2, the total loss coefficient alpha can be written as alpha = alpha1ng + alpha2ng2 ( ng is the group index). It is analytically shown the backscattering loss generally dominates the radiation loss for ng>10. Combined with systematic simulations of loss dependences on key structure parameters, this analytic study helps identify promising strategies to reduce the slow light loss. The influence of the substrate on the performance of a thermo-optic tuning photonic crystal device was studied in the following section. The substrate-induced thermo-optic tuning is obtained as a function of key physical parameters, based on a semi-analytic theory that agrees well with

  19. Methods, Computational Platform, Verification, and Application of Earthquake-Soil-Structure-Interaction Modeling and Simulation

    Science.gov (United States)

    Tafazzoli, Nima

    Seismic response of soil-structure systems has attracted significant attention for a long time. This is quite understandable with the size and the complexity of soil-structure systems. The focus of three important aspects of ESSI modeling could be on consistent following of input seismic energy and a number of energy dissipation mechanisms within the system, numerical techniques used to simulate dynamics of ESSI, and influence of uncertainty of ESSI simulations. This dissertation is a contribution to development of one such tool called ESSI Simulator. The work is being done on extensive verified and validated suite for ESSI Simulator. Verification and validation are important for high fidelity numerical predictions of behavior of complex systems. This simulator uses finite element method as a numerical tool to obtain solutions for large class of engineering problems such as liquefaction, earthquake-soil-structure-interaction, site effect, piles, pile group, probabilistic plasticity, stochastic elastic-plastic FEM, and detailed large scale parallel models. Response of full three-dimensional soil-structure-interaction simulation of complex structures is evaluated under the 3D wave propagation. Domain-Reduction-Method is used for applying the forces as a two-step procedure for dynamic analysis with the goal of reducing the large size computational domain. The issue of damping of the waves at the boundary of the finite element models is studied using different damping patterns. This is used at the layer of elements outside of the Domain-Reduction-Method zone in order to absorb the residual waves coming out of the boundary layer due to structural excitation. Extensive parametric study is done on dynamic soil-structure-interaction of a complex system and results of different cases in terms of soil strength and foundation embedment are compared. High efficiency set of constitutive models in terms of computational time are developed and implemented in ESSI Simulator

  20. The TAOS/STEP Satellite

    OpenAIRE

    Edwards, David; Hosken, Robert

    1995-01-01

    The Technology for Autonomous Operational Survivability / Space Test Experiments Platform (TAOS/STEP) satellite was launched on a Taurus booster from Vandenberg Air Force Base into a nearly circular, 105 degree inclined orbit on March 13, 1994. The purpose of this satellite is twofold: 1) to test a new concept in multiple procurements of fast-track modular satellites and 2) to test a suite of Air Force Phillips Laboratory payloads in space. The TAOS payloads include the Microcosm Autonomous N...

  1. Structural analysis of Clostridium botulinum neurotoxin type D as a platform for the development of targeted secretion inhibitors.

    Science.gov (United States)

    Masuyer, Geoffrey; Davies, Jonathan R; Moore, Kevin; Chaddock, John A; Ravi Acharya, K

    2015-09-01

    The botulinum neurotoxin type D is one of seven highly potent toxins produced by Clostridium botulinum which inhibit neurotransmission at cholinergic nerve terminals. A functional fragment derived from the toxin, LHn, consisting of the catalytic and translocation domains, has been heralded as a platform for the development of targeted secretion inhibitors. These secretion inhibitors are aimed at retargeting the toxin towards a specific cell type to inhibit vesicular secretion. Here we report crystal structures of LHn from serotype D at 2.3 Å, and that of SXN101959 at 3.1 Å resolution. SXN101959, a derivative that combines LHn from serotype D with a fragment of the growth hormone releasing hormone, has previously revealed promising results in inhibiting growth hormone release in pituitary somatotrophs. These structures offer for the first time insights into the translocation domain interaction with the catalytic domain in serotype D. Furthermore, structural information from small-angle X-ray scattering of LHn/D is compared among serotypes A, B, and D. Taken together, these results demonstrate the robustness of the 'LHn fold' across serotypes and its use in engineering additional polypeptide components with added functionality. Our study demonstrates the suitability of botulinum neurotoxin, and serotype D in particular, as a basis for engineering novel secretion inhibitors.

  2. Visualizing the Structure of the Earth’s Lithosphere on the Google Earth Virtual-Globe Platform

    Directory of Open Access Journals (Sweden)

    Liangfeng Zhu

    2016-03-01

    Full Text Available While many of the current methods for representing the existing global lithospheric models are suitable for academic investigators to conduct professional geological and geophysical research, they are not suited to visualize and disseminate the lithospheric information to non-geological users (such as atmospheric scientists, educators, policy-makers, and even the general public as they rely on dedicated computer programs or systems to read and work with the models. This shortcoming has become more obvious as more and more people from both academic and non-academic institutions struggle to understand the structure and composition of the Earth’s lithosphere. Google Earth and the concomitant Keyhole Markup Language (KML provide a universal and user-friendly platform to represent, disseminate, and visualize the existing lithospheric models. We present a systematic framework to visualize and disseminate the structure of the Earth’s lithosphere on Google Earth. A KML generator is developed to convert lithospheric information derived from the global lithospheric model LITHO1.0 into KML-formatted models, and a web application is deployed to disseminate and visualize those models on the Internet. The presented framework and associated implementations can be easily exported for application to support interactively integrating and visualizing the internal structure of the Earth with a global perspective.

  3. A new model of Earth's radial conductivity structure derived from over 10 yr of satellite and observatory magnetic data

    DEFF Research Database (Denmark)

    Püthe, Christoph; Kuvshinov, Alexey; Khan, Amir;

    2015-01-01

    We present a newmodel of the radial (1-D) conductivity structure of Earth's mantle. This model is derived frommore than 10 yr of magnetic measurements from the satellites ørsted, CHAMP, SAC-C and the Swarm trio as well as the global network of geomagnetic observatories. After removal of core...... and crustal field as predicted by a recent field model, we fit the magnetic data with spherical harmonic coefficients describing ring current activity and associated induction effects and estimate global C-responses at periods between 1.5 and 150 d. The C-responses are corrected for 3-D effects due...

  4. Open, Cross Platform Chemistry Application Unifying Structure Manipulation, External Tools, Databases and Visualization

    Science.gov (United States)

    2014-05-30

    The rendering data structures, support classes, and code reside in a rendering library that depends upon OpenGL and GLEW, but remains independent of...requires integration with Qt in order to open up windows, handle user interaction, and perform other common tasks. This is implemented in a Qt OpenGL ...library that provides customized OpenGL render windows and related functionality. Finally, Distribution Statement A: Distribution is approved for public

  5. Using satellite-based evapotranspiration estimates to improve the structure of a simple conceptual rainfall-runoff model

    Science.gov (United States)

    Roy, Tirthankar; Gupta, Hoshin V.; Serrat-Capdevila, Aleix; Valdes, Juan B.

    2017-02-01

    Daily, quasi-global (50° N-S and 180° W-E), satellite-based estimates of actual evapotranspiration at 0.25° spatial resolution have recently become available, generated by the Global Land Evaporation Amsterdam Model (GLEAM). We investigate the use of these data to improve the performance of a simple lumped catchment-scale hydrologic model driven by satellite-based precipitation estimates to generate streamflow simulations for a poorly gauged basin in Africa. In one approach, we use GLEAM to constrain the evapotranspiration estimates generated by the model, thereby modifying daily water balance and improving model performance. In an alternative approach, we instead change the structure of the model to improve its ability to simulate actual evapotranspiration (as estimated by GLEAM). Finally, we test whether the GLEAM product is able to further improve the performance of the structurally modified model. Results indicate that while both approaches can provide improved simulations of streamflow, the second approach also improves the simulation of actual evapotranspiration significantly, which substantiates the importance of making diagnostic structural improvements to hydrologic models whenever possible.

  6. Advanced offshore oil platforms

    Energy Technology Data Exchange (ETDEWEB)

    Ellers, F.S.

    1982-04-01

    Four innovative offshore platforms that are designed to withstand 100-foot waves in waters 600-feet deep are described. These platforms are: (1) Stratfjord B Concrete Gravity-Base Platform; (2) Magnus Steel-Template-Jacket Platform; (3) Hutton Tension-Leg Platform; and (4) Block 280 Guyed Tower. The Statfjord B platform, designed in Norway, rests on four massive concrete columns with storage tanks at the base. It depends solely on its own mass for stability. The Magnus platform, designed by the British, is the heaviest offshore platform yet fabricated, weighing 41,000 tons. Two of the platform's four legs will incorporate flotation chambers so that the structure can be floated to its site in the North Sea. The Hutton structure, also designed in England, will consist of a buoyant hull tethered to the sea floor by slender steel tubes at its four corners. The first platform of its type, the Hutton structure is also destined for the North Sea. The US designed Block 280 guyed tower is designed for service in the Gulf of Mexico in water 1000 feet deep. It will be pinned to the sea floor by a spokelike array of 20 steel cables, each one more than 3000 feet long. The tower and its guys will weigh 43,000 tons, slightly more than the Magnus steel-template jacket and more than four time as much as the Eiffel Tower. At a cost of approximately $2.6 billion, the Magnus is the most expensive offshore platform to date. The Statfjord B was put into production in 1982. The Magnus is scheduled for oil production in 1983. The Hutton and the Block 280 will both be producing in 1984. (JMT)

  7. Seismic Performance Evaluation of the Jacket Type Offshore Platforms through Incremental Dynamic Analysis considering Soil-Pile-Structure Interaction

    Science.gov (United States)

    Asgarian, Behrouz; Shokrgozar, Hamed R.; Talarposhti, Ali Shakeri

    2008-07-01

    Of great interest in Performance-Based Earthquake Engineering (PBEE) is the accurate estimation of the seismic performance of structures. A performance prediction and evaluation procedure is based on nonlinear dynamics and reliability theory. In this method, a full integration over the three key stochastic models is as follow: ground motion hazard curve, nonlinear dynamic displacement demand, and displacement capacity. Further, both epistemic and aleatory uncertainties are evaluated and carried through the analysis. In this paper, jacket and soil-pile system have been modeled using Finite Element program (OpenSees) and the incremental dynamic analysis (IDA) are performed to investigate nonlinear behavior of offshore platforms. The system demand is determined by performing time history response analyses of the jacket under a suite of FEMA/SAC uniform hazard ground motions. The system capacity in terms of the drift ratio against incipient collapse is generally difficult to predict since the structural response goes into nonlinear range before collapse. All the analyses are performed in two directions and the results are compared with each others. The confidence level of a jacket in each direction for a given hazard level is calculated using the procedure described.

  8. Control Structure Impact on the Flying Performance of the Multi-Rotor VTOL Platform - Design, Analysis and Experimental Validation

    Directory of Open Access Journals (Sweden)

    Roman Czyba

    2013-01-01

    Full Text Available The aim of this research is to examine the different control strategies for the unmanned aerial vehicles (UAV. The control task is formulated as an angular stabilization of the four rotor platform, and also as a tracking problem of chosen state variables. The PID algorithm has been considered in three structures in respect of the optimal control signal applied to the actuators. For better performance of the quadrotor in hover mode the cascade control system has been proposed. The simulation results of attitude control with different PID controller architectures are presented, and confirm the effectiveness of the proposed control structure and theoretical expectations. Moreover, the design and the practical realization of the control architecture on the experimental aerial vehicle are described. The fast prototyping method together with Matlab/Simulink software and DAQ hardware are used for both evolution and validation of control algorithms. The capacity of the attitude stabilization system is important in the development process of more advanced functionality of autonomous flying vehicles; therefore it needs to be highlighted and taken into careful consideration.

  9. Satellite Communication.

    Science.gov (United States)

    Technology Teacher, 1985

    1985-01-01

    Presents a discussion of communication satellites: explains the principles of satellite communication, describes examples of how governments and industries are currently applying communication satellites, analyzes issues confronting satellite communication, links mathematics and science to the study of satellite communication, and applies…

  10. Unscented predictive variable structure filter for satellite attitude estimation with model errors when using low precision sensors

    Science.gov (United States)

    Cao, Lu; Li, Hengnian

    2016-10-01

    For the satellite attitude estimation problem, the serious model errors always exist and hider the estimation performance of the Attitude Determination and Control System (ACDS), especially for a small satellite with low precision sensors. To deal with this problem, a new algorithm for the attitude estimation, referred to as the unscented predictive variable structure filter (UPVSF) is presented. This strategy is proposed based on the variable structure control concept and unscented transform (UT) sampling method. It can be implemented in real time with an ability to estimate the model errors on-line, in order to improve the state estimation precision. In addition, the model errors in this filter are not restricted only to the Gaussian noises; therefore, it has the advantages to deal with the various kinds of model errors or noises. It is anticipated that the UT sampling strategy can further enhance the robustness and accuracy of the novel UPVSF. Numerical simulations show that the proposed UPVSF is more effective and robustness in dealing with the model errors and low precision sensors compared with the traditional unscented Kalman filter (UKF).

  11. Fluorescence coupling into structured waveguide as platform for optical portable sensors

    Science.gov (United States)

    Seiler, Anne-Laure; Labeye, Pierre; Pouteau, Patrick; Mallard, Frédéric; Hugon, Xavier; Benech, Pierre

    2005-11-01

    Optical chemical sensors and biosensors are attracting research interest in applications such as environmental monitoring and biomedical diagnostics. Structured Integrated Optical Waveguide is one solution to reduce the reader's cost and size. The principle is the capture of fluorescence emitted by Qdots at the surface of a rib waveguide, which collects then guides it at the end-face of the chip to be detected. However, fluorescence coupling into a waveguide is still not easy to predict as it depends on fluorophore's environment and dipole's orientation and location. We report here the validation of a simple theory concerning optimization of optical waveguide's thickness considering a fluorophore's position. Optimisation of coupling power between a dipole and a guided mode can be simplified by the optimisation of the guided mode's intensity ratio integrated in the 5 nm region over the guide's core surface (where QDots are supposed to settle) divided by the whole guided intensity. A model has been developed from the work of Marcuse1: coupled power is proportional to the square of the electrical field of the guided wave. As a result, this model gives an optimal core's thickness and efficiency of coupling depends on polarisation. Moreover, FDTD simulations do complete this study. Three thicknesses have been therefore experimentally deposited: 100 nm, 125 nm and 150 nm. To conclude, experimentation corresponds to the model. A new, sensitive and potentially low cost portable transducer for the analysis of all kinds of biomolecular affinity systems has been developed and validated.

  12. An ancient satellite DNA has maintained repetitive units of the original structure in most species of the living fossil plant genus Zamia.

    Science.gov (United States)

    Cafasso, Donata; Chinali, Gianni

    2014-03-01

    ZpS1 satellite DNA is specific to the genus Zamia and presents repetitive units organized as long arrays and also as very short arrays dispersed in the genome. We have characterized the structure of the ZpS1 repeats in 12 species representative of the whole geographic distribution of the genus. In most species, the clone most common sequences (cMCS) were so similar that a general most common sequence (GMCS) of the ZpS1 repetitive unit in the genus could be obtained. The few partial variations from the GMCS found in cMCS of some species correspond to variable positions present in most other species, as indicated by the clone consensus sequences (cCS). Two species have an additional species-specific variety of ZpS1 satellite. The dispersed repeats were found to contain more mutations than repeats from long arrays. Our results indicate that all or most species of Zamia inherited the ZpS1 satellite from a common ancestor in Miocene and have maintained repetitive units of the original structure till present. The features of ZpS1 satellite in the genus Zamia are poorly compatible with the model of concerted evolution, but they are perfectly consistent with a new model of satellite evolution based on experimental evidences indicating that a specific amplification-substitution repair mechanism maintains the homogeneity and stability of the repeats structure in each satellite DNA originally present in a species as long as the species exists.

  13. Small-scale structure of the geodynamo inferred from Oersted and Magsat satellite data.

    Science.gov (United States)

    Hulot, Gauthier; Eymin, Céline; Langlais, Benoît; Mandea, Mioara; Olsen, Nils

    2002-04-11

    The 'geodynamo' in the Earth's liquid outer core produces a magnetic field that dominates the large and medium length scales of the magnetic field observed at the Earth's surface. Here we use data from the currently operating Danish Oersted satellite, and from the US Magsat satellite that operated in 1979/80, to identify and interpret variations in the magnetic field over the past 20 years, down to length scales previously inaccessible. Projected down to the surface of the Earth's core, we found these variations to be small below the Pacific Ocean, and large at polar latitudes and in a region centred below southern Africa. The flow pattern at the surface of the core that we calculate to account for these changes is characterized by a westward flow concentrated in retrograde polar vortices and an asymmetric ring where prograde vortices are correlated with highs (and retrograde vortices with lows) in the historical (400-year average) magnetic field. This pattern is analogous to those seen in a large class of numerical dynamo simulations, except for its longitudinal asymmetry. If this asymmetric state was reached often in the past, it might account for several persistent patterns observed in the palaeomagnetic field. We postulate that it might also be a state in which the geodynamo operates before reversing.

  14. An Ad-hoc Satellite Network to Measure Filamentary Current Structures in the Auroral Zone

    Science.gov (United States)

    Nabong, C.; Fritz, T. A.; Semeter, J. L.

    2014-12-01

    An ad-hoc cubesat-based satellite network project known as ANDESITE is under development at Boston University. It aims to develop a dense constellation of easy-to-use, rapidly-deployable low-cost wireless sensor nodes in space. The objectives of the project are threefold: 1) Demonstrate viability of satellite based sensor networks by deploying an 8-node miniature sensor network to study the filamentation of the field aligned currents in the auroral zones of the Earth's magnetosphere. 2) Test the scalability of proposed protocols, including localization techniques, tracking, data aggregation, and routing, for a 3 dimensional wireless sensor network using a "flock" of nodes. 3) Construct a 6U Cube-sat running the Android OS as an integrated constellation manager, data mule and sensor node deplorer. This small network of sensor nodes will resolve current densities at different spatial resolutions in the near-Earth magnetosphere using measurements from magnetometers with 1-nT sensitivities and 0.2 nT/√Hz self-noise. Mapping of these currents will provide new constraints for models of auroral particle acceleration, wave-particle interactions, ionospheric destabilization, and other kinetic processes operating in the low-beta plasma of the near Earth magnetosphere.

  15. An integrated approach for gas dispersion, gas explosion and structural impact analysis for an offshore production platform on the Dutch continental shelf

    NARCIS (Netherlands)

    Korndörffer, W.; Schaap, D.; Heijden, A.M.A. van der; Versloot, N.H.A.

    2004-01-01

    The design of an offshore gas production platform has been subjected to an extensive quantitative risk analysis in particular with regard to its resistance to gas explosions loads. It was demonstrated that integration of the physical and structural effects of a gas explosion in an early stage of the

  16. Seismic interpretation of dinantian carbonate platforms in the Netherlands; implications for the palaeogeographical and structural development of the Northwest European Carboniferous Basin

    NARCIS (Netherlands)

    Kombrink, H.; Lochem, H. van; Zwan, K.J. van der

    2010-01-01

    The Northwest European Carboniferous Basin is characterized by a series of carbonate platforms and intervening shale-dominated troughs during the Dinantian Sub-period. These structures have been mainly found along the margins of the basin. Here we present the results of an investigation of high-qual

  17. Seismic interpretation of dinantian carbonate platforms in the Netherlands; implications for the palaeogeographical and structural development of the Northwest European Carboniferous Basin

    NARCIS (Netherlands)

    Kombrink, H.; Lochem, H. van; Zwan, K.J. van der

    2010-01-01

    The Northwest European Carboniferous Basin is characterized by a series of carbonate platforms and intervening shale-dominated troughs during the Dinantian Sub-period. These structures have been mainly found along the margins of the basin. Here we present the results of an investigation of high-qual

  18. A lipidomic platform establishment for structural identification of skin ceramides with non-hydroxyacyl chains.

    Science.gov (United States)

    Shin, Jung-Hoon; Shon, Jong Cheol; Lee, Kyohoon; Kim, Sunki; Park, Chang Seo; Choi, Eung Ho; Lee, Choong Hwan; Lee, Hye Suk; Liu, Kwang-Hyeon

    2014-03-01

    The stratum corneum (SC) is the outermost layer of skin that functions as a barrier and protects against environmental influences and transepidermal water loss. Its unique morphology consists of keratin-enriched corneocytes embedded in a distinctive mixture of lipids containing mainly ceramides, free fatty acids, and cholesterol. Ceramides are sphingolipids consisting of sphingoid bases, which are linked to fatty acids by an amide bond. Typical sphingoid bases in the skin are composed of dihydrosphingosine (dS), sphingosine (S), phytosphingosine (P), and 6-hydroxysphingosine (H), and the fatty acid acyl chains are composed of non-hydroxy fatty acid (N), α-hydroxy fatty acid (A), ω-hydroxy fatty acid (O), and esterified ω-hydroxy fatty acid (E). The 16 ceramide classes include several combinations of sphingoid bases and fatty acid acyl chains. Among them, N-type ceramides are the most abundant in the SC. Mass spectrometry (MS)/MS analysis of N-type ceramides using chip-based direct infusion nanoelectrospray-ion trap mass spectrometry generated the characteristic fragmentation pattern of both acyl and sphingoid units, which could be applied to structural identification of ceramides. Based on the MS/MS fragmentation patterns of N-type ceramides, comprehensive fragmentation schemes were proposed. In addition, mass fragmentation patterns, which are specific to the sphingoid backbone of N-type ceramides, were found in higher m/z regions of tandem mass spectra. These characteristic and general fragmentation patterns were used to identify N-type ceramides in human SC. Based on established MS/MS fragmentation patterns of N-type ceramides, 52 ceramides (including different classes of NS, NdS, NP, and NH) were identified in human SC. The MS/MS fragmentation patterns of N-type ceramides were characterized by interpreting their product ion scan mass spectra. This information may be used to identify N-type ceramides in the SC of human, rat, and mouse skin.

  19. Geosynchronous Earth Orbit/Low Earth Orbit Space Object Inspection and Debris Disposal: A Preliminary Analysis Using a Carrier Satellite With Deployable Small Satellites

    OpenAIRE

    Crockett, Derick A.

    2013-01-01

    Detailed observations of geosynchronous satellites from earth are very limited. To better inspect these high altitude satellites, the use of small, refuelable satellites is proposed. The small satellites are stationed on a carrier platform in an orbit near the population of geosynchronous satellites. A carrier platform equipped with deployable, refuelable SmallSats is a viable option to inspect geosynchronous satellites. The propellant requirement to transfer to a targeted geosynchronous sate...

  20. Payment Platform

    DEFF Research Database (Denmark)

    Hjelholt, Morten; Damsgaard, Jan

    2012-01-01

    Payment transactions through the use of physical coins, bank notes or credit cards have for centuries been the standard formats of exchanging money. Recently online and mobile digital payment platforms has entered the stage as contenders to this position and possibly could penetrate societies...... thoroughly and substitute current payment standards in the decades to come. This paper portrays how digital payment platforms evolve in socio-technical niches and how various technological platforms aim for institutional attention in their attempt to challenge earlier platforms and standards. The paper...... applies a co-evolutionary multilevel perspective to model the interplay and processes between technology and society wherein digital payment platforms potentially will substitute other payment platforms just like the credit card negated the check. On this basis this paper formulate a multilevel conceptual...

  1. Local and General Monitoring of Forni Glacier (italian Alps) Using Multi-Platform Structure-From Photogrammetry

    Science.gov (United States)

    Scaioni, M.; Corti, M.; Diolaiuti, G.; Fugazza, D.; Cernuschi, M.

    2017-09-01

    Experts from the University of Milan have been investigating Forni Glacier in the Italian alps for decades, resulting in the archive of a cumbersome mass of observed data. While the analysis of archive maps, medium resolution satellite images and DEM's may provide an overview of the long-term processes, the application of close-range sensing techniques offers the unprecedented opportunity to operate a 4D reconstruction of the glacier geometry at both global and local levels. In the latest years the availability of high-resolution DEM's from stereo-photogrammetry (2007) and UAV-photogrammetry (2014 and 2016) has allowed an improved analysis of the glacier ice-mass balance within time. During summer 2016 a methodology to record the local disruption processes has been investigated. The presence of vertical and sub-vertical surfaces has motivated the use of Structure-from-Motion Photogrammetry from ground-based stations, which yielded results comparable to the ones achieved using a long-range terrestrial laser scanner. This technique may be assumed as benchmarking for accuracy assessment, but is more difficult to be operated in high-mountain areas. Nevertheless, the measurement of GCP's for the terrestrial photogrammetric project has revealed to be a complex task, involving the need of a total station a GNSS. The effect of network geometry on the final output has also been investigated for SfM-Photogrammetry, considering the severe limitations implied in the Alpine environment.

  2. LOCAL AND GENERAL MONITORING OF FORNI GLACIER (ITALIAN ALPS USING MULTI-PLATFORM STRUCTURE-FROM-MOTION PHOTOGRAMMETRY

    Directory of Open Access Journals (Sweden)

    M. Scaioni

    2017-09-01

    Full Text Available Experts from the University of Milan have been investigating Forni Glacier in the Italian alps for decades, resulting in the archive of a cumbersome mass of observed data. While the analysis of archive maps, medium resolution satellite images and DEM’s may provide an overview of the long-term processes, the application of close-range sensing techniques offers the unprecedented opportunity to operate a 4D reconstruction of the glacier geometry at both global and local levels. In the latest years the availability of high-resolution DEM's from stereo-photogrammetry (2007 and UAV-photogrammetry (2014 and 2016 has allowed an improved analysis of the glacier ice-mass balance within time. During summer 2016 a methodology to record the local disruption processes has been investigated. The presence of vertical and sub-vertical surfaces has motivated the use of Structure-from-Motion Photogrammetry from ground-based stations, which yielded results comparable to the ones achieved using a long-range terrestrial laser scanner. This technique may be assumed as benchmarking for accuracy assessment, but is more difficult to be operated in high-mountain areas. Nevertheless, the measurement of GCP’s for the terrestrial photogrammetric project has revealed to be a complex task, involving the need of a total station a GNSS. The effect of network geometry on the final output has also been investigated for SfM-Photogrammetry, considering the severe limitations implied in the Alpine environment.

  3. Rotational spectroscopy of pyridazine and its isotopologs from 235-360 GHz: Equilibrium structure and vibrational satellites

    Science.gov (United States)

    Esselman, Brian J.; Amberger, Brent K.; Shutter, Joshua D.; Daane, Mitchell A.; Stanton, John F.; Woods, R. Claude; McMahon, Robert J.

    2013-12-01

    The rotational spectrum of pyridazine (o-C4H4N2), the ortho disubstituted nitrogen analog of benzene, has been measured and analyzed in the gas phase. For the ground vibrational state of the normal isotopolog, over 2000 individual rotational transitions have been identified between 238 and 360 GHz and have been fit to 13 parameters of a 6th-order centrifugal distortion Hamiltonian. All transitions in this frequency region can now be predicted from this model to near experimental accuracy, i.e., well enough for the purpose of any future radio-astronomical search for this species. Three isotopologs, [3-13C]-C4H4N2, [4-13C]-C4H4N2, and [1-15N]-C4H4N2, have been detected in natural abundance, and several hundred lines have been measured for each of these species and fit to 6th-order Hamiltonians. Ten additional isotopologs were synthesized with enhanced deuterium substitution and analyzed to allow for a complete structure determination. The equilibrium structure (Re) of pyridazine was obtained by correcting the experimental rotational constants for the effects of vibration-rotation coupling using interaction constants predicted from CCSD(T) calculations with an ANO0 basis set and further correcting for the effect of electron mass. The final Re structural parameters are determined with excellent accuracy, as evidenced by their ability to predict 28 independent moments of inertia (Ia and Ib for 14 isotopologs) very well from 9 structural parameters. The rotational spectra of the six lowest-energy fundamental vibrational satellites of the main isotopolog have been detected. The rotational spectra of the five lowest-energy vibrational satellites have been assigned and fit to yield accurate rotational and distortion constants, while the fit and assignment for the sixth is less complete. The resultant vibration-rotation interaction (α) constants are found to be in excellent agreement with ones predicted from coupled-cluster calculations, which proved to be the key to

  4. System Design of a S-band Solid-state Transmitter in Satellite-borne SAR

    Directory of Open Access Journals (Sweden)

    Zhao Hai-yang

    2014-06-01

    Full Text Available The system design of a S-band solid-state transmitter in satellite-borne SAR is introduced. A series of critical technologies, such as high reliability, environmental adaptability, and structure miniaturization, which are necessary in satellite applications, are analyzed and discussed. The technologies are experimentally verified at different periods. Multichannel combined technology is used for the transmitter, and the output peak power is more than 3 kW. Because of the high efficiency, small size, lightweight, and high power, it is especially applicable in small satellite platforms.

  5. Tailoring the internal structure of liquid crystalline nanoparticles responsive to fungal lipases: A potential platform for sustained drug release.

    Science.gov (United States)

    Poletto, F S; Lima, F S; Lundberg, D; Nylander, T; Loh, W

    2016-11-01

    Lipases are key components in the mechanisms underlying the persistence and virulence of infections by fungi, and thus also promising triggers for bioresponsive lipid-based liquid crystalline nanoparticles. We here propose a platform in which only a minor component of the formulation is susceptible to cleavage by lipase and where hydrolysis triggers a controlled phase transition within the nanoparticles that can potentially allow for an extended drug release. The responsive formulations were composed of phytantriol, which was included as a non-cleavable major component and polysorbate 80, which serves both as nanoparticle stabilizer and potential lipase target. To monitor the structural changes resulting from lipase activity with sufficient time resolution, we used synchrotron small angle x-ray scattering. Comparing the effect of the two different lipases used in this work, lipase B from Candida Antarctica, (CALB) and lipase from Rhizomucor miehei (RMML), only CALB induced phase transition from bicontinuous reverse cubic to reverse hexagonal phase within the particles. This phase transition can be attributed to an increasing amount of oleic acid formed on cleavage of the polysorbate 80. However, when also a small amount of a cationic surfactant was included in the formulation, RMML could trigger the corresponding phase transition as well. The difference in activity between the two lipases can tentatively be explained by a difference in their interaction with the nanoparticle surface. Thus, a bioresponsive system for treating fungal infections, with a tunable selectivity for different types of lipases, could be obtained by tuning the composition of the nanoparticle formulation.

  6. Recent Advances and Achievements in Nanomaterial-Based, and Structure Switchable Aptasensing Platforms for Ochratoxin A Detection

    Directory of Open Access Journals (Sweden)

    Jean Louis Marty

    2013-11-01

    Full Text Available Aptamer-based bioreceptors that can easily adopt their surroundings have captured the attention of scientists from a wide spectrum of domains in designing highly sensitive, selective and structure switchable sensing assays. Through elaborate design and chemical functionalization, numerous aptamer-based assays have been developed that can switch their conformation upon incubation with target analyte, resulting in an enhanced output signal. To further lower the detection limits to picomolar levels, nanomaterials have attracted great interest in the design of aptamer-based sensing platforms. Associated to their unique properties, nanomaterials offer great promise for numerous aptasensing applications. This review will discuss current research activities in the aptasensing with typical example of detection of ochratoxin A (OTA. OTA, a secondary fungal metabolite, contaminates a variety of food commodities, and has several toxicological effects such as nephrotoxic, hepatotoxic, neurotoxic, teratogenic and immunotoxic activities. The review will introduce advances made in the methods of integrating nanomaterials in aptasensing, and will discuss current conformational switchable design strategies in aptasensor fabrication methodologies.

  7. Steel Structure Installation Construction of Air Cooling Platform%空冷平台钢结构安装施工

    Institute of Scientific and Technical Information of China (English)

    王俊杰

    2011-01-01

    China Power Investment Sinkiang Wusu Thermal Power Plant Stage I(2×300MW)Unit Project # I Air Cooling Platform adopts steel truss structure .Steel truss has the characteristics of great span, high section height, big weight and the like.Integral installation technique of long span steel truss ,construction process,lifting order,quality and safety control measures are introduced aiming at difficulties for the project constuction.The project schedule,quality and safety are ensured due to appropriate measure and reasonable organization.%中电投新疆乌苏热电厂一期(2×300MW)机组工程#1空冷平台采用钢桁架结构.铜桁架具有跨度大、截面高度高、重量大等特点.针对工程施工难点,介绍大跨度钢桁架整片安装技术、施工工艺流程、吊装顺序、质量和安全控制措施.由于措施得当,组织合理,保证了工程进度,质量和安全.

  8. A cylinder based calibration method for integrating a line structured light sensor with a rotation-translation platform

    Science.gov (United States)

    Zhou, Jingbo; Li, Yuehua; Liu, Lijian

    2016-09-01

    As a non-contact measuring apparatus, line structured light sensor (LSLS) can only get one profile of an object without the combination with other motional axes. To achieve the complete 3D measurement, a rotation-translation platform was integrated with the LSLS, and a cylinder based calibration method was also brought out. Firstly, the calibration model was proposed to determine the transformation matrix between the measuring coordinate frame (MCF) and the sensor coordinate frame (SCF). This model relies on the fact that the projection of an arbitrary intersection profile between the laser plane and the cylinder in its axis direction lies on a circle with a radius equal to the cylinder. Then, for a specified rotated angle and translated position of the object, the measured data from the SCF could all be transformed into the MCF, and the complete surface data could be obtained. Finally, a cylinder and a rectangular block were inspected by the proposed method. The surface data was successfully obtained and their intersection profiles indicate a high measuring accuracy of the proposed method. The method was further verified by the measured results of a screw surface.

  9. 海洋平台结构振动控制研究综述%Review on the Study of Structure Vibration Control for Offshore Platforms

    Institute of Scientific and Technical Information of China (English)

    肖宇维; 孙树民

    2012-01-01

    The vibration of offshore platforms will harm staff's physical and mental health, cause fatigue and destruction of the structure, reduce practicality, survivability and maneuverability of offshore platforms and bring a series of threat to oil mining. This paper mainly introduces the study and application status of structure vibration control of offshore platforms and focuses on the passive control, active control and semi-active control technology. Finally some problems on structure vibration control offshore platforms are puts forward.%海洋平台结构的振动将会影响工作人员的身心健康,导致结构疲劳和破坏,降低平台的实用性、生存性以及可操作性,给海上油气顺利开采带来一系列的威胁。本文主要对海洋平台结构振动控制的研究和应用现状做了简要的介绍,并重点介绍了被动控制、主动控制以及半主动控制技术。最后提出了海洋平台结构振动控制存在的一些问题。

  10. Many-electron effects in photoelectron spectroscopy. [Deviations from Koopman's one-electron model, satellite structure, configuration interaction, mechanisms

    Energy Technology Data Exchange (ETDEWEB)

    Martin, R.L.

    1976-06-01

    The deviations from Koopmans' one-electron model of photoionization which lead to satellite structure in the photoelectron spectrum are examined within the formalism of configuration interaction (CI). The mechanisms which contribute to satellite intensity may be classified as continuum state configuration interaction, final ionic state configuration interaction, and initial state configuration interaction. The discussion centers around the last two mechanisms, these being the prime contributors to the satellite intensity well above threshold. Specific examples of theoretical ''spectra'' are presented for the F(1s) region of HF and the 1s region of neon. The agreement between theory and experiment is found to be excellent. In these two instances, initial state configuration interaction contributions increase the satellite intensity and are of nearly equal importance to the final ionic state mixing.

  11. Seismic interpretation of the sedimentation systems, structural geology and stratigraphic of the Chicxulub crater, carbonate platform of Yucatan, Mexico.

    Science.gov (United States)

    Iza, Canales-Garcia; Jaime, Urrutia-Fucugauchi; Joaquin Eduardo, Aguayo-Camargo; Angel, Alatorre-Mendieta Miguel

    2016-04-01

    In order to describe the structural and stratigraphic features of the Chicxulub crater, was performed the present work of seismic interpretation, seismic attributes and generation of 3D surfaces. Load data it was performed in SEG-Y format, to display a total of 19 seismic reflection profiles were worked at domain time; the corresponding interpretation was carried out by separating five packages with textural differences, for this separation were used five horizons with seismic response representing the base of these packages, the correlation of horizons was made for all lines, creating composed lines so that all profiles were interpret together at intersections for form a grid. Multiple fault zones, were interpreted with the help of seismic attributes, like RMS amplitude, complex trace analysis, gradient of the trace and cosine phase. Was obtained the structural and stratigraphic interpretation , 3D models of the surfaces interpreted with which it is possible to observe the morphology of the base of the basin, it is controlled by the effect of the impact that formed the crater, has the features as a multi-ring crater. Shallower horizons shows that the topography of the base of the crater continues to affect the upper relief, which tends to be horizontal as it approaches the surface but is modeled by themselves sedimentary processes of the carbonate platform of Yucatán; packages below the base of the crater show the characteristics that own carbonated breccia, product the rupture of the material at impact, the material was deposited in a chaotic way, at this level we found the faults and fractures zone.

  12. Effects of the environment on galaxies in the Catalogue of Isolated Galaxies: physical satellites and large scale structure

    Science.gov (United States)

    Argudo-Fernández, M.; Verley, S.; Bergond, G.; Sulentic, J.; Sabater, J.; Fernández Lorenzo, M.; Espada, D.; Leon, S.; Sánchez-Expósito, S.; Santander-Vela, J. D.; Verdes-Montenegro, L.

    2014-04-01

    Context. We present a study of the 3D environment for a sample of 386 galaxies in the Catalogue of Isolated Galaxies (CIG, Karachentseva 1973) using the Ninth Data Release of the Sloan Digital Sky Survey (SDSS-DR9). Aims: We aim to identify and quantify the effects of the satellite distribution around a sample of galaxies in the CIG, as well as the effects of the large-scale structure (LSS). Methods: To recover the physically bound galaxies we first focused on the satellites that are within the escape speed of each CIG galaxy. We also propose a more conservative method using the stacked Gaussian distribution of the velocity difference of the neighbours. The tidal strengths affecting the primary galaxy were estimated to quantify the effects of the local and LSS environments. We also defined the projected number density parameter at the fifth nearest neighbour to characterise the LSS around the CIG galaxies. Results: Out of the 386 CIG galaxies considered in this study, at least 340 (88% of the sample) have no physically linked satellite. Following the more conservative Gaussian distribution of physical satellites around the CIG galaxies leads to upper limits. Out of the 386 CIG galaxies, 327 (85% of the sample) have no physical companion within a projected distance of 0.3 Mpc. The CIG galaxies are distributed following the LSS of the local Universe, although presenting a large heterogeneity in their degree of connection with it. When present around a CIG galaxy, the effect of physically bound galaxies largely dominates (typically by more than 90%) the tidal strengths generated by the LSS. Conclusions: The CIG samples a variety of environments, from galaxies with physical satellites to galaxies without neighbours within 3 Mpc. A clear segregation appears between early-type CIG galaxies with companions and isolated late-type CIG galaxies. Isolated galaxies are in general bluer, with probably younger stellar populations and very high star formation compared with older

  13. Origin, Bulk Chemical Composition and Physical Structure of the Galilean Satellites of Jupiter: A Post-Galileo Analysis

    Science.gov (United States)

    Prentice, A. J. R.

    1999-01-01

    The origin of Jupiter and the Galilean satellite system is examined in the light of the new data that has been obtained by the NASA Galileo Project. In particular, special attention is given to a theory of satellite origin which was put forward at the start of the Galileo Mission and on the basis of which several predictions have now been proven successful. These predictions concern the chemical composition of Jupiter's atmosphere and the physical structure of the satellites. According to the proposed theory of satellite origin, each of the Galilean satellites formed by chemical condensation and gravitational accumulation of solid grains within a concentric family of orbiting gas rings. These rings were cast off equatorially by the rotating proto-Jovian cloud (PJC which contracted gravitationally to form Jupiter some 4 1/2 billion years ago. The PJC formed from the gas and grains left over from the gas ring that had been shed at Jupiter's orbit by the contracting proto-solar cloud (PSC Supersonic turbulent convection provides the means for shedding discrete gas rings. The temperatures T (sub n) of the system of gas rings shed by the PSC and PJC vary with their respective mean orbital radii R (sub n) (n = 0, 1,2,...) according as T (sub n) proportional to R (sub n) (exp -0.9). If the planet Mercury condenses at 1640 K, so accounting for the high density of that planet via a process of chemical fractionation between iron and silicates, then T (sub n) at Jupiter's orbit is 158 K. Only 35% of the water vapour condenses out. Thus fractionation between rock and ice, together with an enhancement in the abundance of solids relative to gas which takes place through gravitational sedimentation of solids onto the mean orbit of the gas ring, ensures nearly equal proportions of rock and ice in each of Ganymede and Callisto. Io and Europa condense above the H20 ice point and consist solely of hydrated rock (h-rock). The Ganymedan condensate consists of h-rock and H20 ice. For

  14. Automated retrieval of forest structure variables based on multi-scale texture analysis of VHR satellite imagery

    Science.gov (United States)

    Beguet, Benoit; Guyon, Dominique; Boukir, Samia; Chehata, Nesrine

    2014-10-01

    The main goal of this study is to design a method to describe the structure of forest stands from Very High Resolution satellite imagery, relying on some typical variables such as crown diameter, tree height, trunk diameter, tree density and tree spacing. The emphasis is placed on the automatization of the process of identification of the most relevant image features for the forest structure retrieval task, exploiting both spectral and spatial information. Our approach is based on linear regressions between the forest structure variables to be estimated and various spectral and Haralick's texture features. The main drawback of this well-known texture representation is the underlying parameters which are extremely difficult to set due to the spatial complexity of the forest structure. To tackle this major issue, an automated feature selection process is proposed which is based on statistical modeling, exploring a wide range of parameter values. It provides texture measures of diverse spatial parameters hence implicitly inducing a multi-scale texture analysis. A new feature selection technique, we called Random PRiF, is proposed. It relies on random sampling in feature space, carefully addresses the multicollinearity issue in multiple-linear regression while ensuring accurate prediction of forest variables. Our automated forest variable estimation scheme was tested on Quickbird and Pléiades panchromatic and multispectral images, acquired at different periods on the maritime pine stands of two sites in South-Western France. It outperforms two well-established variable subset selection techniques. It has been successfully applied to identify the best texture features in modeling the five considered forest structure variables. The RMSE of all predicted forest variables is improved by combining multispectral and panchromatic texture features, with various parameterizations, highlighting the potential of a multi-resolution approach for retrieving forest structure

  15. Magnetospheric Multiscale Satellite Observations of Parallel Electron Acceleration in Magnetic Field Reconnection by Fermi Reflection from Time Domain Structures.

    Science.gov (United States)

    Mozer, F S; Agapitov, O A; Artemyev, A; Burch, J L; Ergun, R E; Giles, B L; Mourenas, D; Torbert, R B; Phan, T D; Vasko, I

    2016-04-08

    The same time domain structures (TDS) have been observed on two Magnetospheric Multiscale Satellites near Earth's dayside magnetopause. These TDS, traveling away from the X line along the magnetic field at 4000  km/s, accelerated field-aligned ∼5  eV electrons to ∼200  eV by a single Fermi reflection of the electrons by these overtaking barriers. Additionally, the TDS contained both positive and negative potentials, so they were a mixture of electron holes and double layers. They evolve in ∼10  km of space or 7 ms of time and their spatial scale size is 10-20 km, which is much larger than the electron gyroradius (<1  km) or the electron inertial length (4 km at the observation point, less nearer the X line).

  16. Global Variability of Mesoscale Convective System Anvil Structure from A-Train Satellite Data

    Science.gov (United States)

    Yuan, Jian; Houze, Robert A.

    2010-01-01

    Mesoscale convective systems (MCSs) in the tropics produce extensive anvil clouds, which significantly affect the transfer of radiation. This study develops an objective method to identify MCSs and their anvils by combining data from three A-train satellite instruments: Moderate Resolution Imaging Spectroradiometer (MODIS) for cloud-top size and coldness, Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) for rain area size and intensity, and CloudSat for horizontal and vertical dimensions of anvils. The authors distinguish three types of MCSs: small and large separated MCSs and connected MCSs. The latter are MCSs sharing a contiguous rain area. Mapping of the objectively identified MCSs shows patterns of MCSs that are consistent with previous studies of tropical convection, with separated MCSs dominant over Africa and the Amazon regions and connected MCSs favored over the warm pool of the Indian and west Pacific Oceans. By separating the anvil from the raining regions of MCSs, this study leads to quantitative global maps of anvil coverage. These maps are consistent with the MCS analysis, and they lay the foundation for estimating the global radiative effects of anvil clouds. CloudSat radar data show that the modal thickness of MCS anvils is about 4-5 km. Anvils are mostly confined to within 1.5-2 times the equivalent radii of the primary rain areas of the MCSs. Over the warm pool, they may extend out to about 5 times the rain area radii. The warm ocean MCSs tend to have thicker non-raining and lightly raining anvils near the edges

  17. Global Variability of Mesoscale Convective System Anvil Structure from A-Train Satellite Data

    Science.gov (United States)

    Yuan, Jian; Houze, Robert A.

    2010-01-01

    Mesoscale convective systems (MCSs) in the tropics produce extensive anvil clouds, which significantly affect the transfer of radiation. This study develops an objective method to identify MCSs and their anvils by combining data from three A-train satellite instruments: Moderate Resolution Imaging Spectroradiometer (MODIS) for cloud-top size and coldness, Advanced Microwave Scanning Radiometer for Earth Observing System (AMSR-E) for rain area size and intensity, and CloudSat for horizontal and vertical dimensions of anvils. The authors distinguish three types of MCSs: small and large separated MCSs and connected MCSs. The latter are MCSs sharing a contiguous rain area. Mapping of the objectively identified MCSs shows patterns of MCSs that are consistent with previous studies of tropical convection, with separated MCSs dominant over Africa and the Amazon regions and connected MCSs favored over the warm pool of the Indian and west Pacific Oceans. By separating the anvil from the raining regions of MCSs, this study leads to quantitative global maps of anvil coverage. These maps are consistent with the MCS analysis, and they lay the foundation for estimating the global radiative effects of anvil clouds. CloudSat radar data show that the modal thickness of MCS anvils is about 4-5 km. Anvils are mostly confined to within 1.5-2 times the equivalent radii of the primary rain areas of the MCSs. Over the warm pool, they may extend out to about 5 times the rain area radii. The warm ocean MCSs tend to have thicker non-raining and lightly raining anvils near the edges

  18. Spatial and temporal changes in household structure locations using high-resolution satellite imagery for population assessment: an analysis in southern Zambia, 2006-2011

    Directory of Open Access Journals (Sweden)

    Timothy Shields

    2016-05-01

    Full Text Available Satellite imagery is increasingly available at high spatial resolution and can be used for various purposes in public health research and programme implementation. Comparing a census generated from two satellite images of the same region in rural southern Zambia obtained four and a half years apart identified patterns of household locations and change over time. The length of time that a satellite image-based census is accurate determines its utility. Households were enumerated manually from satellite images obtained in 2006 and 2011 of the same area. Spatial statistics were used to describe clustering, cluster detection, and spatial variation in the location of households. A total of 3821 household locations were enumerated in 2006 and 4256 in 2011, a net change of 435 houses (11.4% increase. Comparison of the images indicated that 971 (25.4% structures were added and 536 (14.0% removed. Further analysis suggested similar household clustering in the two images and no substantial difference in concentration of households across the study area. Cluster detection analysis identified a small area where significantly more household structures were removed than expected; however, the amount of change was of limited practical significance. These findings suggest that random sampling of households for study participation would not induce geographic bias if based on a 4.5-year-old image in this region. Application of spatial statistical methods provides insights into the population distribution changes between two time periods and can be helpful in assessing the accuracy of satellite imagery.

  19. Platform contents

    OpenAIRE

    Renault, Régis

    2014-01-01

    A monopoly platform hosts advertisers who compete on a market for horizontally differentiated products. These products may be either mass market products that appeal broadly to the entire consumer population or niche products that are tailored to the tastes of some particular group. Consumers search sequentially through ads incurring a surfing cost of moving to the next ad. They may click on an ad at some cost, which provides all relevant information and the opportunity to buy. The platform c...

  20. Estimates of changes of structural parameters of forest ecosystems in decoding high resolution satellite images

    Directory of Open Access Journals (Sweden)

    Yuri F. Rozhkov

    2016-05-01

    Full Text Available Aim of this study was to assess the possibility of using of the parameter of symmetry of pixel distribution in the forest condition monitoring. Multispectral satellite imagery and their fragments of high and medium resolution (Landsat TM/ЕТМ+, Aster, Spot, IRS, which have been made in 1995–2011, were processed in two stages. At the first stage, uncontrolled classification has been carried out using the method ISODATA (Iterative Self-Organizing Data Analysis Technigue. At the second stage, parameter of symmetry of pixel distribution was calculated. The results of classification were divided into two halves. Classes with lower optical density of the reflected light were concentrated in the upper half while classes with higher optical density of the reflected light were concentrated in the bottom half. The prospects for using the parameter symmetry of pixel distribution aim to assess the degree of forest disturbance after the fire impact was demonstrated. Disturbed forest areas a have larger sum of pixels in the bottom half of the classification results compared with the upper half. In contrast, undisturbed forest areas have a larger or equal sum of pixels in the upper half of the classification results compared with the bottom half. The prospects for using the parameter symmetry of pixel distribution in monitoring of seasonal changes of forest status were demonstrated. Comparison of two forest fragments with dominance of larch and Siberian pine showed that during the autumn months (September, October after needle fall and leaf fall, there is a sharp decrease of the parameter "symmetry of pixel distribution" within the fragment with dominance of larch due to the increase of the proportion of pixels with high optical density. Seasonal changes in the parameter of symmetry of pixels distribution were less pronounced for the forest fragment with dominance of Siberian pine. We considered the prospect to use the parameter of symmetry of pixel

  1. Structural Analysis - A case study of the Rømer Satellite

    DEFF Research Database (Denmark)

    Lorentzen, Torsten; Blanke, Mogens; Niemann, Hans Henrik

    2003-01-01

    Spacecraft systems increase in functionality and complexity. At the same time, requirements increase to autonomy in order to cut expensive ground station support. Complexity and autonomy combine to a problem that is very di.cult to analyze by traditional means. Structural analysis is a tool that ...... that in theory has the potential to cope with this complexity, but the technique is not yet in widespread use. This paper shows how structural analysis can be used in practice to aid in the design of the autonomy related parts of an entire spacecraft subsystem....

  2. A novel platform designed by Au core/inorganic shell structure conjugated onto MTX/LDH for chemo-photothermal therapy.

    Science.gov (United States)

    Tian, De-Ying; Wang, Wei-Yuan; Li, Shu-Ping; Li, Xiao-Dong; Sha, Zhao-Lin

    2016-05-30

    A novel platform making up of methotrexate intercalated layered double hydroxide (MTX/LDH) hybrid doped with gold nanoparticles (NPs) may have great potential both in chemo-photothermal therapy and the simultaneous drug delivery. In this paper, a promising platform of Au@PDDA-MTX/LDH was developed for anti-tumor drug delivery and synergistic therapy. Firstly, Au NPs were coated using Layer-by-Layer (LbL) technology by alternate deposition of poly (diallyldimethylammonium chloride) (PDDA) and MTX molecules, and then the resulting core-shell structures (named as Au@PDDA-MTX) were directly conjugated onto the surface of MTX/LDH hybrid by electrostatic attraction to afford Au@PDDA-MTX/LDH NPs. Here MTX was used as both the agent for surface modification and the anti-tumor drug for chemotherapy. The platform of Au@PDDA-MTX/LDH NPs not only had a high drug-loading capacity, but also showed excellent colloidal stability and interesting pH-responsive release profile. In vitro drug release studies demonstrated that MTX released from Au@PDDA-MTX/LDH was relatively slow under normal physiological pH, but it was enhanced significantly at a weak acidic pH value. Furthermore, the combined treatment of cancer cells by using Au@PDDA-MTX/LDH for synergistic hyperthermia ablation and chemotherapy was demonstrated to exhibit higher therapeutic efficacy than either single treatment alone, underscoring the great potential of the platform for cancer therapy.

  3. Multi-functional 3D printed and embedded sensors for satellite qualification structures

    NARCIS (Netherlands)

    Shemelya, Corey; Banuelos-Chacon, Luis; Melendez, Adrian; Kief, Craig; Espalin, David; Wicker, Ryan; Krijnen, Gijs; MacDonald, Eric

    2015-01-01

    Three dimensional (3D) printing has recently gained attention in a variety of industries ranging from aerospace to biomedical. However, in order to create truly functional 3D printed structures, electronic functionality must be integrated into building sequence. This work explores the integration of

  4. Auxetic shape memory alloy cellular structures for deployable satellite antennas: design, manufacture and testing

    Directory of Open Access Journals (Sweden)

    Di Maio D.

    2010-06-01

    Full Text Available We describe the production development and experimental tests related to an hybrid honeycomb-truss made of shape memory alloy (Ni48Ti46Cu6, and used as a demonstrator for a deployable antenna in deep-space missions. Specific emphasis is placed on the modal analysis techniques used to test the lightweight SMA structure.

  5. Estimating Canopy Structure in an Amazon Forest from Laser Range Finder and IKONOS Satellite Observations

    Science.gov (United States)

    Gregory P. Asner; Michael Palace; Michael Keller; Rodrigo Pereira Jr.; Jose N. M. Silva; Johan C. Zweede

    2002-01-01

    Canopy structural data can be used for biomass estimation and studies of carbon cycling, disturbance, energy balance, and hydrological processes in tropical forest ecosystems. Scarce information on canopy dimensions reflects the difficulties associated with measuring crown height, width, depth, and area in tall, humid tropical forests. New field and spaceborne...

  6. Multi-functional 3D printed and embedded sensors for satellite qualification structures

    NARCIS (Netherlands)

    Shemelya, Corey; Banuelos-Chacon, Luis; Melendez, Adrian; Kief, Craig; Espalin, David; Wicker, Ryan; Krijnen, Gijsbertus J.M.; MacDonald, Eric

    2015-01-01

    Three dimensional (3D) printing has recently gained attention in a variety of industries ranging from aerospace to biomedical. However, in order to create truly functional 3D printed structures, electronic functionality must be integrated into building sequence. This work explores the integration of

  7. Mapping Urban Tree Canopy Coverage and Structure using Data Fusion of High Resolution Satellite Imagery and Aerial Lidar

    Science.gov (United States)

    Elmes, A.; Rogan, J.; Williams, C. A.; Martin, D. G.; Ratick, S.; Nowak, D.

    2015-12-01

    Urban tree canopy (UTC) coverage is a critical component of sustainable urban areas. Trees provide a number of important ecosystem services, including air pollution mitigation, water runoff control, and aesthetic and cultural values. Critically, urban trees also act to mitigate the urban heat island (UHI) effect by shading impervious surfaces and via evaporative cooling. The cooling effect of urban trees can be seen locally, with individual trees reducing home HVAC costs, and at a citywide scale, reducing the extent and magnitude of an urban areas UHI. In order to accurately model the ecosystem services of a given urban forest, it is essential to map in detail the condition and composition of these trees at a fine scale, capturing individual tree crowns and their vertical structure. This paper presents methods for delineating UTC and measuring canopy structure at fine spatial resolution (HVAC benefits from UTC for individual homes, and for assessing the ecosystem services for entire urban areas. Such maps have previously been made using a variety of methods, typically relying on high resolution aerial or satellite imagery. This paper seeks to contribute to this growing body of methods, relying on a data fusion method to combine the information contained in high resolution WorldView-3 satellite imagery and aerial lidar data using an object-based image classification approach. The study area, Worcester, MA, has recently undergone a large-scale tree removal and reforestation program, following a pest eradication effort. Therefore, the urban canopy in this location provides a wide mix of tree age class and functional type, ideal for illustrating the effectiveness of the proposed methods. Early results show that the object-based classifier is indeed capable of identifying individual tree crowns, while continued research will focus on extracting crown structural characteristics using lidar-derived metrics. Ultimately, the resulting fine resolution UTC map will be

  8. New offshore platform in the Mexican Gulf

    Energy Technology Data Exchange (ETDEWEB)

    Beisel, T.

    1982-04-01

    After a construction period of only 10 months, the second steel Offshore platform was recently completed in the Mexican Gulf. The pattern for this structure was the Cognac platform. The erection of the new platform, called the 'Cerveza' platform, is described in the article.

  9. Stacbeam - An efficient, low-mass, sequentially deployable structure. [for satellite solar power

    Science.gov (United States)

    Adams, L. R.

    1982-01-01

    Design features of the stacking triangular articulated compact beam (Stacbeam) as a candidate truss structure for GEOS spacecraft solar power arrays are explored. Solar arrays of increasing size require folding, noninterfering structures, minimal thermal effects, slow and controlled deployment, and a high aspect ratio. The Stacbeam consists of a triangular batten frame perpendicular to the beam axis, three longerons attached at the corners of the batten frame and mounted parallel to the beam axis, and three diagonals to provide shear and torsional stiffness. Locking hinges are installed at the midpoint and ends of each longeron and at the midpoint and ends of each diagonal. The material is graphite/epoxy composite with a 120 GPa modulus and a 1500 kg/sq m density. Successful vertical deployment on the ground has been effected with a prototype deployer, together with horizontal cantilever in a fully deployed configuration.

  10. Operating project for the Renardieres Power Laboratory: System structure. Acquisition and control satellites

    Energy Technology Data Exchange (ETDEWEB)

    Castagnet, D. (GIXI, 91 - Les Ulis (France))

    The principles and the construction of the new operating system for the Power Test Laboratory are presented. Emphasis is laid on the similarity between the project and Architecture 3 type remote operation systems, the electromagnetic disturbance and high safety level aspects and the utilization of microcomputers. After a presentation of the basic principles, modularity, standartization, safety, surroundings and maintenance, the article offers an explanation of the checking system structure, constituted by a central core and a network of industrial computers (SAC). These latter are described from the point of view of operations (remote-signalling, remote-control, remote-measurements, subsidiary functions), equipment structure (central processing unit, input and output boards) and reflections on the software (design, implementation, etc.).

  11. An advanced OBP-based payload operating in an asynchronous network for future data relay satellites utilising CCSDS-standard data structures

    Science.gov (United States)

    Grant, M.; Vernucci, A.

    1991-01-01

    A possible Data Relay Satellite System (DRSS) topology and network architecture is introduced. An asynchronous network concept, whereby each link (Inter-orbit, Inter-satellite, Feeder) is allowed to operate on its own clock, without causing loss of information, in conjunction with packet data structures, such as those specified by the CCSDS for advanced orbiting systems is discussed. A matching OBP payload architecture is described, highlighting the advantages provided by the OBP-based concept and then giving some indications on the OBP mass/power requirements.

  12. NASA's geostationary communications platform program

    Science.gov (United States)

    Ramler, J.; Durrett, R.

    1984-01-01

    This paper reviews recent trends in communications satellites and explains NASA's current interest in geostationary communications platforms. Large communications platforms capable of supporting multiple payloads with common utilities have been examined in a number of studies since 1974 and appear to offer a number of potential advantages. In 1981, an Industry Briefing and Workshop sponsord by NASA focused on the institutional, operational and technical issues that will influence the implementation of geostationary platforms. The workshop identified numerous issues and problem areas that needed more detailed study. To address the issues/problems identified, a NASA geostationary communications platform program has been developed. This program is described, focusing on the initial studies to be performed.

  13. Measurement of Atmospheric Composition from Geostationary Platforms

    Science.gov (United States)

    Bhartia, P. K.; Kawa, S. R.; Janz, S.; Herman, J. R.; Gleason, J. F.

    2008-01-01

    Satellite instruments flown since 1970 have had great success in elucidating the processes that control stratospheric ozone. In contrast, space-based data for tropospheric constituents that affect air quality and climate have only recently become available. While these datasets highlight the rapidly advancing capabilities of spacebased tropospheric sensors, they are also pointing to the limitations of sun-synchronous, low-earth orbiting (SSO/LEO) satellite platforms for making such measurements. In our talk we will highlight the science requirements for new missions and the technological and algorithmic approaches that we are developing to meet these requirements. From these studies a clear need for advanced atmospheric composition sensors has emerged that can be put on geostationary (GEO) platforms to provide 5 km horizontal resolution with 15-60 minutes repeat cycle. Such measurements have been high priority in the recently released Decadal Survey report by the US National Research Council. The need for GEO is driven not only by the science requirements to track rapidly changing pollution events but also by the need to provide altitude-resolved information about tropospheric constituents. Currently, with the exception of aerosols, it is not possible to derive profile information about lower tropospheric constituents from satellite measurements. New algorithmic approaches are being developed to obtain this information by combining UV and IR data, by monitoring the spatial and temporal structures of the constituents, and by using low-level clouds to separate boundary layer constituents from free troposphere. All these approaches require better spatial and temporal resolution than that provided by LEO sensors.

  14. Data-as-a-Service Platform for Delivering Healthy Lifestyle and Preventive Medicine: Concept and Structure of the DAPHNE Project.

    Science.gov (United States)

    Gibbons, Catherine; Bailador Del Pozo, Gonzalo; Andrés, Javier; Lobstein, Tim; Manco, Melania; Lewy, Hadas; Bergman, Einat; O'Callaghan, David; Doherty, Gavin; Kudrautseva, Olga; Palomares, Angel; Ram, Roni; Olmo, Alberto

    2016-12-09

    Overweight and obesity is related to many health problems and diseases. The current obesity epidemic, which is a major health problem, is closely related to a lack of physical activity, high levels of sedentary behavior, and increased energy intake; with evidence to show increasing incidence of these issues in the younger population. Tackling obesity and its comorbid conditions requires a holistic approach encompassing attention on physical activity, healthy diet, and behavioral activation in order to enable and maintain meaningful and long-term weight loss and weight maintenance. The objective of the Data-as-a-Service Platform for Healthy Lifestyle and Preventive Medicine (DAPHNE) project is to develop a breakthrough information communications technology (ICT) platform for tracking health, weight, physical activity, diet, lifestyle, and psychological components within health care systems, whereby the platform and clinical support is linked. The DAPHNE platform aims to deliver personalized guidance services for lifestyle management to the citizen/patient by means of (1) advanced sensors and mobile phone apps to acquire and store continuous/real-time data on lifestyle aspects, behavior, and surrounding environment; (2) individual models to monitor their health and fitness status; (3) intelligent data processing for the recognition of behavioral trends; and (4) specific services for personalized guidance on healthy lifestyle and disease prevention. It is well known that weight loss and maintenance of weight loss are particularly difficult. This tool will address some of the issues found with conventional treatment/advice in that it will collect data in real time, thereby reducing reliability issues known with recalling events once they have passed and will also allow adjustment of behavior through timely support and recommendations sent through the platform without the necessity of formal one-to-one visits between patient and clinician. Patient motivation

  15. Structural Mapping of Folded Sedimentary Environments from Satellite Images: an Example from Central Asia

    Science.gov (United States)

    Leith, W.

    1985-01-01

    In the Tadjik Depression, in Soviet Central Asia, in the absence of existing geologic or topographic maps, an enhanced LANDSAT multispectral scanner image was used in combination with field data to produce a 1:250000 geologic map of the Vakhsh fold-and-thrust belt and adjacent autochthon. Several structural conclusions are reached as a result of this mapping. Deformation of the Cretaceous and Tertiary strata of the fold-and-thrust belt is, in the central Tadjik Depression, conspicuously absent north of a buried basement fault that marks the hinge-zone of the Late Mesozoic passive margin. But, in the eastern half of the depression, thrusting has moved coherent sheets northward, over the block fault, these sheets now lie flat atop the autochthon to the north. The crustal structure inherited from the Mesozoic extensional phase has strongly influenced the Late Cenozoic pattern of deformation, producing the fold-and-thrust belt that is markedly asymmetric. The development of the thrust system has included the progressive overlapping of thrust: the later thrusts apparently formed internal to the older thrusts, and subsequently overrode them.

  16. ITS Platform

    DEFF Research Database (Denmark)

    Tøfting, Svend; Lahrmann, Harry; Agerholm, Niels

    2014-01-01

    Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden ...... not have to be very intelligent. This is gradually taken over by applications on smart phones. The ITS Platform with 425 test drivers is now completely developed and can be used for technological testing of e.g. payment systems.......Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden...

  17. Vertical and Horizontal Analysis of Crustal Structure of Southeastern Mediterranean and the Egyptian Coastal Zone, from Bouguer and Satellite Mission Data

    Science.gov (United States)

    Saleh, Salah

    2016-07-01

    The present Tectonic system of Southeastern Mediterranean is driven by the collision of the African and Eurasian plates, the Arabian Eurasian convergence and the displacement of the Anatolian Aegean microplate, which generally represents the characteristic of lithospheric structure of the region. In the scope of this study, Bouguer and the satellite gravity (satellite altimetry) anomalies of southeastern Mediterranean and North Eastern part of Egypt were used for investigating the lithospheric structures. Second order trend analyses were applied firstly to Bouguer and satellite altimetry data for examining the characteristic of the anomaly. Later, the vertical and horizontal derivatives applications were applied to the same data. Generally, the purpose of the applying derivative methods is determining the vertical and horizontal borders of the structure. According to the results of derivatives maps, the study area could mainly divided into important four tectonic subzones depending on basement and Moho depth maps. These subzones are distributed from south to the north as: Nile delta-northern Sinai zone, north Egyptian coastal zone, Levantine basin zone and northern thrusting (Cyprus and its surroundings) zone. These zones are separated from each other by horizontal tectonic boundaries and/or near-vertical faults that display the block-faulting tectonic style of this belt. Finally, the gravity studies were evaluated together with the seismic activity of the region. Consequently, the geodynamical structure of the region is examined with the previous studies done in the region. Thus, the current study indicates that satellite gravity mission data is a valuable source of data in understanding the tectonic boundary behavior of the studied region and that satellite gravity data is an important modern source of data in the geodynamical studies.

  18. An integrated image processing platform designed for Chinese GF-1 wide field view data

    Science.gov (United States)

    Li, Zhishan; Shi, Runhe; Liu, Chaoshun; Chen, Maosi

    2016-09-01

    The Wide Field View (WFV), a space borne multi-spectral sensor onboard the Chinese GaoFen-1 (GF-1) satellite from the China High-resolution Earth Observation System, is operating in orbit dedicating to providing Earth observation with decametric spatial resolution, high temporal resolution and wide coverage for environment monitoring purpose. The objective of this study is to present an integrated image processing and environment monitoring platform specifically for GF-1 WFV data. The platform is developed with a multi-layer architecture and C/S structure, which primarily consists of image pre-processing, environment monitoring, data visualization, and results output modules. The client application was created by using C# whereas IDL was used to develop image processing and other relevant algorithms. This paper focuses mainly on the overall design of the platform and related key techniques. The platform has been implemented as a stand-alone application, and successfully implemented in real world environment monitoring studies.

  19. Quantitative analysis of satellite structures in XPS spectra of gold and silver

    Science.gov (United States)

    Pauly, N.; Yubero, F.; Tougaard, S.

    2016-10-01

    Identification of specific chemical states and local electronic environments at surfaces by X-ray photoelectron spectroscopy (XPS) is often difficult because it is not straightforward to quantitatively interpret the shape and intensity of shake-up structures that originate from the photoexcitation process. Indeed the shape and intensity of measured XPS structures are strongly affected by both extrinsic excitations due to electron transport out of the surface and intrinsic excitations induced by the sudden creation of the static core hole. These processes must be taken into account to quantitatively extract, from experimental XPS, the primary excitation spectrum of the considered transition which includes all effects that are part of the initial photo-excitation process, i.e. lifetime broadening, spin-orbit coupling, and multiplet splitting. It was previously shown [N. Pauly, S. Tougaard, F. Yubero, Surf. Sci. 620 (2014) 17] that both extrinsic and intrinsic excitations could be included in an effective energy-differential inelastic electron scattering cross section for XPS which is then convoluted with the primary excitation spectrum to model the full XPS spectrum. This method can thus be applied to determine the primary excitation spectrum from any XPS spectrum. We use this approach in the present paper to determine the Au 4f and Ag 3d photoemission spectra from pure metals. We observe that characteristic energy loss features of the XPS spectra are not only due to photoelectron energy losses. We thus prove the existence of a double shake-up process characterized by a 4d → 5s/5p transition for Ag and a 5d → 6s/6p transition for Au. We finally accurately quantify the energy position and intensity of these shake-up peaks.

  20. ITS Platform

    DEFF Research Database (Denmark)

    Tøfting, Svend; Lahrmann, Harry; Agerholm, Niels

    2014-01-01

    Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden ...... not have to be very intelligent. This is gradually taken over by applications on smart phones. The ITS Platform with 425 test drivers is now completely developed and can be used for technological testing of e.g. payment systems....

  1. Quantitative analysis of satellite structures in XPS spectra of gold and silver

    Energy Technology Data Exchange (ETDEWEB)

    Pauly, N., E-mail: nipauly@ulb.ac.be [Université libre de Bruxelles, Service de Métrologie Nucléaire (CP 165/84), 50 av. F. D. Roosevelt, B-1050 Brussels (Belgium); Yubero, F. [Instituto de Ciencia de Materiales de Sevilla, Univ. Sevilla – CSIC, av. Américo Vespucio 49, E-41092 Sevilla (Spain); Tougaard, S. [Department of Physics, Chemistry and Pharmacy, University of Southern Denmark, DK-5230 Odense M (Denmark)

    2016-10-15

    Highlights: • Accurate determination of the energy loss functions for Au and Ag. • Calculation of effective inelastic electron scattering cross sections for Au and Ag. • Convolution of these cross sections with varying model primary spectra F(E). • Variation of F(E) until a good agreement with experimental XPS spectra is reached. • Quantitative determination of Au 4f and Ag 3d characteristics. - Abstract: Identification of specific chemical states and local electronic environments at surfaces by X-ray photoelectron spectroscopy (XPS) is often difficult because it is not straightforward to quantitatively interpret the shape and intensity of shake-up structures that originate from the photoexcitation process. Indeed the shape and intensity of measured XPS structures are strongly affected by both extrinsic excitations due to electron transport out of the surface and intrinsic excitations induced by the sudden creation of the static core hole. These processes must be taken into account to quantitatively extract, from experimental XPS, the primary excitation spectrum of the considered transition which includes all effects that are part of the initial photo-excitation process, i.e. lifetime broadening, spin–orbit coupling, and multiplet splitting. It was previously shown [N. Pauly, S. Tougaard, F. Yubero, Surf. Sci. 620 (2014) 17] that both extrinsic and intrinsic excitations could be included in an effective energy-differential inelastic electron scattering cross section for XPS which is then convoluted with the primary excitation spectrum to model the full XPS spectrum. This method can thus be applied to determine the primary excitation spectrum from any XPS spectrum. We use this approach in the present paper to determine the Au 4f and Ag 3d photoemission spectra from pure metals. We observe that characteristic energy loss features of the XPS spectra are not only due to photoelectron energy losses. We thus prove the existence of a double shake-up process

  2. Structure of the SPRY domain of the human RNA helicase DDX1, a putative interaction platform within a DEAD-box protein

    Energy Technology Data Exchange (ETDEWEB)

    Kellner, Julian N.; Meinhart, Anton, E-mail: anton.meinhart@mpimf-heidelberg.mpg.de [Max Planck Institute for Medical Research, Jahnstrasse 29, 69120 Heidelberg (Germany)

    2015-08-25

    The structure of the SPRY domain of the human RNA helicase DDX1 was determined at 2.0 Å resolution. The SPRY domain provides a putative protein–protein interaction platform within DDX1 that differs from other SPRY domains in its structure and conserved regions. The human RNA helicase DDX1 in the DEAD-box family plays an important role in RNA processing and has been associated with HIV-1 replication and tumour progression. Whereas previously described DEAD-box proteins have a structurally conserved core, DDX1 shows a unique structural feature: a large SPRY-domain insertion in its RecA-like consensus fold. SPRY domains are known to function as protein–protein interaction platforms. Here, the crystal structure of the SPRY domain of human DDX1 (hDSPRY) is reported at 2.0 Å resolution. The structure reveals two layers of concave, antiparallel β-sheets that stack onto each other and a third β-sheet beneath the β-sandwich. A comparison with SPRY-domain structures from other eukaryotic proteins showed that the general β-sandwich fold is conserved; however, differences were detected in the loop regions, which were identified in other SPRY domains to be essential for interaction with cognate partners. In contrast, in hDSPRY these loop regions are not strictly conserved across species. Interestingly, though, a conserved patch of positive surface charge is found that may replace the connecting loops as a protein–protein interaction surface. The data presented here comprise the first structural information on DDX1 and provide insights into the unique domain architecture of this DEAD-box protein. By providing the structure of a putative interaction domain of DDX1, this work will serve as a basis for further studies of the interaction network within the hetero-oligomeric complexes of DDX1 and of its recruitment to the HIV-1 Rev protein as a viral replication factor.

  3. Utilizing platforms in industrialized construction

    DEFF Research Database (Denmark)

    Bonev, Martin; Wörösch, Michael; Hvam, Lars

    2015-01-01

    construction companies. A promising approach adapted by operations management and design theory regards individual building projects as the adjustment and recombination of components and processes from a set of predefined platforms, while configuration systems assure feasible building solutions. Design...... methods map structural platform characteristics so as to balance commonality and distinctiveness. Originality/value – This paper proposes a general theory of platform-based development and execution in the industrialised construction sector, which goes beyond concurrent approaches of standardising...

  4. Platform computing

    CERN Multimedia

    2002-01-01

    "Platform Computing releases first grid-enabled workload management solution for IBM eServer Intel and UNIX high performance computing clusters. This Out-of-the-box solution maximizes the performance and capability of applications on IBM HPC clusters" (1/2 page) .

  5. C/NOFS satellite observations of equatorial ionospheric plasma structures supported by multiple ground-based diagnostics in October 2008

    Science.gov (United States)

    Nishioka, M.; Basu, Su.; Basu, S.; Valladares, C. E.; Sheehan, R. E.; Roddy, P. A.; Groves, K. M.

    2011-10-01

    In early October 2008, the C/NOFS satellite orbited near the magnetic equator at its perigee altitude of ˜400 km at dusk in the Peruvian sector. This provided an ideal opportunity for a comparison, under the current very low solar flux condition, of equatorial ionospheric disturbances observed with the Communication/Navigation Outage Forecasting System (C/NOFS) in situ measurements and ground-based observations available near Jicamarca Observatory. The primary objective was the comparison of plasma density disturbances measured by a Planar Langmuir Probe (PLP) instrument on the C/NOFS satellite with VHF scintillation activity at Ancon near Jicamarca for this period. Here we discuss in detail two extreme cases: one in which severe in situ disturbances were accompanied by mild scintillation on a particular day, namely, 10 October while there was little in situ disturbance with strong scintillation on 5 October. This apparent contradiction was diagnosed further by a latitudinal ground-based GPS network at Peruvian longitudes, a Digisonde, and the incoherent scatter radar (ISR) at Jicamarca. The crucial distinction was provided by the behavior of the equatorial ionization anomaly (EIA). The EIA was well-developed on the day having severe in situ disturbances (10 Oct). This led to lower equatorial plasma density and total electron content (TEC) at the equator and consequently reduced the scintillations detected at Ancon. On the other hand, on the day with severe scintillations (5 Oct), the EIA was not so well developed as on 10 October, leading to relatively higher equatorial plasma density and TEC. Consequently the severe scintillations at Ancon were likely caused by ionospheric structure located below the altitude of C/NOFS. The NRL SAMI2 model was utilized to gain a greater understanding of the role of neutral winds and electric fields in reproducing the TEC as a function of latitude for both classes of irregularities. Spectral studies with high resolution in situ

  6. Formal correctness, safety, dependability, and performance analysis of a satellite

    NARCIS (Netherlands)

    Esteve, M.-A.; Katoen, J.P.; Nguyen, V.Y.; Postma, B.; Yushstein, Y.

    2012-01-01

    This paper reports on the usage of a broad palette of formal modeling and analysis techniques on a regular industrial-size design of an ultra-modern satellite platform. These efforts were carried out in parallel with the conventional software development of the satellite platform. The model itself i

  7. Satellite Communication and Development: A Reassessment.

    Science.gov (United States)

    Hudson, Heather E.

    The potential benefits of satellite communications development have been recognized since the notion of a geostationary "space platform" was proposed by Arthur C. Clarke in 1945. Although there have been examples of developmental applications of satellite technology, the promise has been slow in being fulfilled. The history of the…

  8. National Satellite Disaster Reduction Application Service

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The groundbreaking ceremony for National Satellite Disaster Reduction Application Service was held on January 22,2008 in Beijing.The establishment of the center will further improve the disaster monitoring system using remote sensing technology and provides a platform for the application of remote sensing technology and satellite constellation in China's disaster reduction and relief services.

  9. Satellite RNAs and Satellite Viruses.

    Science.gov (United States)

    Palukaitis, Peter

    2016-03-01

    Satellite RNAs and satellite viruses are extraviral components that can affect either the pathogenicity, the accumulation, or both of their associated viruses while themselves being dependent on the associated viruses as helper viruses for their infection. Most of these satellite RNAs are noncoding RNAs, and in many cases, have been shown to alter the interaction of their helper viruses with their hosts. In only a few cases have the functions of these satellite RNAs in such interactions been studied in detail. In particular, work on the satellite RNAs of Cucumber mosaic virus and Turnip crinkle virus have provided novel insights into RNAs functioning as noncoding RNAs. These effects are described and potential roles for satellite RNAs in the processes involved in symptom intensification or attenuation are discussed. In most cases, models describing these roles involve some aspect of RNA silencing or its suppression, either directly or indirectly involving the particular satellite RNA.

  10. Platform Constellations

    DEFF Research Database (Denmark)

    Staykova, Kalina Stefanova; Damsgaard, Jan

    2016-01-01

    messaging apps KakaoTalk and LINE, we are able to gain valuable insights about the nature of these new constructions and to capture and synthesize their main characteristics in a framework. Our results show that platform constellations possess unique innovative capabilities, which can improve users......’ acquisition and users’ engagement rates as well as unlock new sources of value creation and diversify revenue streams....

  11. Construction technology of the canopy with steel structure of the elevated platform%某高架站台雨棚钢结构施工技术

    Institute of Scientific and Technical Information of China (English)

    林纯仁

    2012-01-01

    结合某市轨道交通车站雨棚钢结构施工实例,对城市高架站台雨棚钢结构施工技术进行了研究,解决了长大钢结构制作、超高度吊装的难题,为其他类似工程施工提供了经验和指导。%Combining with the construction of the canopy with steel structure of the urban trail traffic station,the essay studies the construction technology of the canopy with steel structure of the elevated platform,solves the difficulties of fabrication of long and large steel structure and super high hoisting,which has provided experience and guidance for similar construction.

  12. Structural rearrangements of chromosome 15 satellites resulting in Prader-Willi syndrome suggest a complex mechanism for uniparental disomy

    Energy Technology Data Exchange (ETDEWEB)

    Toth-Fijel, S.; Gunter, K.; Olson, S. [Oregon Health Sciences Univ., Portland, OR (United States)] [and others

    1994-09-01

    We report two cases of PWS in which there was abnormal meiosis I segregation of chromosome 15 following a rare translocation event between the heteromorphic satellite regions of chromosomes 14 and 15 and an apparent meiotic recombination in the unstable region of 15q11.2. PWS and normal appearing chromosomes in case one prompted a chromosome 15 origin analysis. PCR analysis indicated maternal isodisomy for the long arm of chromosome. However, only one chromosome 15 had short arm heteromorphisms consistent with either paternal or maternal inheritance. VNTR DNA analysis and heteromorphism data suggest that a maternal de novo translocation between chromosome 14 and 15 occurred prior to meiosis I. This was followed by recombination between D15Z1 and D15S11 and subsequent meiosis I nondisjunction. Proband and maternal karyotype display a distamycin A-DAPI positive region on the chromosome 14 homolog involved in the translocation. Fluorescent in situ hybridization (FISH) analyses of ONCOR probes D15S11, SNRPN, D15S11 and GABRB 3 were normal, consistent with the molecular data. Case two received a Robertsonian translocation t(14;15)(p13;p13) of maternal origin. Chromosome analysis revealed a meiosis I error producing UPD. FISH analysis of the proband and parents showed normal hybridization of ONCOR probes D15Z1, D15S11, SNRPN, D15S10 and GABRB3. In both cases the PWS probands received a structurally altered chromosome 15 that had rearranged with chromosome 14 prior to meiosis. If proper meiotic segregation is dependent on the resolution of chiasmata and/or the binding to chromosome-specific spindle fibers, then it may be possible that rearrangements of pericentric or unstable regions of the genome disrupt normal disjunction and lead to uniparental disomy.

  13. Satellite theory

    Science.gov (United States)

    Kozai, Y.

    1981-04-01

    The dynamical characteristics of the natural satellite of Mars, Jupiter, Saturn, Uranus and Neptune are analyzed on the basis of the solar tidal perturbation factor and the oblateness factor of the primary planet for each satellite. For the inner satellites, for which the value of the solar tidal factor is much smaller than the planetary oblateness factor, it is shown that the eccentricity and inclination of satellite orbits are generally very small and almost constant; several pairs of inner satellites are also found to exhibit commensurable mean motions, or secular accelerations in mean longitude. In the case of the outer satellites, for which solar perturbations are dominant, secular perturbations and long-period perturbations may be derived by the solution of equations of motion reduced to one degree of freedom. The existence of a few satellites, termed intermediary satellites, for which the solar tidal perturbation is on the order of the planetary oblateness factor, is also observed, and the pole of the orbital plane of the satellite is noted to execute a complex motion around the pole of the planet or the orbital plane of the planet.

  14. Capturing Micro-topography of an Arctic Tundra Landscape through Digital Elevation Models (DEMs) Acquired from Various Remote Sensing Platforms

    Science.gov (United States)

    Vargas, S. A., Jr.; Tweedie, C. E.; Oberbauer, S. F.

    2013-12-01

    The need to improve the spatial and temporal scaling and extrapolation of plot level measurements of ecosystem structure and function to the landscape level has been identified as a persistent research challenge in the arctic terrestrial sciences. Although there has been a range of advances in remote sensing capabilities on satellite, fixed wing, helicopter and unmanned aerial vehicle platforms over the past decade, these present costly, logistically challenging (especially in the Arctic), technically demanding solutions for applications in an arctic environment. Here, we present a relatively low cost alternative to these platforms that uses kite aerial photography (KAP). Specifically, we demonstrate how digital elevation models (DEMs) were derived from this system for a coastal arctic landscape near Barrow, Alaska. DEMs of this area acquired from other remote sensing platforms such as Terrestrial Laser Scanning (TLS), Airborne Laser Scanning, and satellite imagery were also used in this study to determine accuracy and validity of results. DEMs interpolated using the KAP system were comparable to DEMs derived from the other platforms. For remotely sensing acre to kilometer square areas of interest, KAP has proven to be a low cost solution from which derived products that interface ground and satellite platforms can be developed by users with access to low-tech solutions and a limited knowledge of remote sensing.

  15. In situ crystallization for fabrication of a core-satellite structured BiOBr-CdS heterostructure with excellent visible-light-responsive photoreactivity.

    Science.gov (United States)

    Guo, Yuxi; Huang, Hongwei; He, Ying; Tian, Na; Zhang, Tierui; Chu, Paul K; An, Qi; Zhang, Yihe

    2015-07-21

    We demonstrate the fabrication of a core-satellite structured BiOBr-CdS photocatalyst with highly efficient photocatalytic reactivity via a facile in situ crystallization approach at room temperature. The transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HR-TEM) results reveal that the BiOBr flakes are surrounded by CdS particles. The coverage of the satellites on the surface of the BiOBr nanosheets could be controlled by changing the content of the CdS, which contributes to the enhanced level of photocatalytic performance. The UV-vis diffuse reflection spectra demonstrate that the visible light absorption of the BiOBr-CdS photocatalyst is also enhanced by the CdS loaded. The excellent structural and spectral properties endow the BiOBr-CdS heterojunctions with improved photocatalytic performance pertaining to bisphenol A (BPA) degradation and photocurrent generation. Under visible light irradiation, the optimum photocatalytic activity of BiOBr-CdS at a molar ratio of 1 : 5 (CdS/BiOBr) is almost 2.8 times and 24.6 times as high as that of pure BiOBr and CdS. The remarkably enhanced photoreactivity should be attributed to the match in the energy levels and close core-satellite structural coupling between the CdS and BiOBr, which greatly facilitates the separation and transfer of photoinduced electron-hole pairs, as confirmed by photoluminescence (PL) and electrochemical impedance spectra (EIS). The present work sheds new light on the construction of highly efficient core-satellite heterojunctional photocatalysts for practical applications.

  16. Assessment of Sentinel-3/OLCI Sub-Pixel Variability and Platform Impact Using Landsat-8/OLI

    Science.gov (United States)

    Vanhellemont, Quinten; Ruddick, Kevin

    2015-12-01

    Validation and calibration of ocean colour sensors with in situ data is key for successful exploitation of their data. Ship campaigns are expensive and provide a low number of good matchups, whereas autonomous systems can typically provide a matchup for each cloud-free scene. With the distribution of free and high quality imagery from Landsat-8, the amount of natural spatial variability in the coastal zone becomes quantifiable, and the possible impact of measurement platforms (ships, moorings, structures) on the signal measured by the satellite becomes clear. Here we present the use of Landsat-8/OLI imagery (30m) to assess the spatial variability within a Sentinel-3/OLCI pixel (300m) at validation sites, as well as an illustration of the impacts of the measurement platforms on the satellite measurement.

  17. The SPOT satellite

    Science.gov (United States)

    Fouquet, J.-P.

    1981-03-01

    The background, objectives and data products of the French SPOT remote sensing satellite system are presented. The system, which was developed starting in 1978 with the subsequent participation of Sweden and Belgium, is based on a standard multimission platform with associated ground control station and a mission-specific payload, which includes two High-Resolution Visible range instruments allowing the acquisition of stereoscopic views from different orbits. Mission objectives include the definition of future remote sensing systems, the compilation of a cartographic and resources data base, the study of species discrimination and production forecasting based on frequent access and off-nadir viewing, the compilation of a stereoscopic data base, and platform and instrument qualification, for possible applications in cartography, geology and agriculture. Standard data products will be available at three levels of preprocessing: radiometric correction only, precision processing for vertical viewing, and cartographic quality processing.

  18. Automation of the satellite platforms of the NE-Campos basin pole, Rio de Janeiro State, Brazil; Automacao das plataformas satelites do polo NE - Bacia de Campos, RJ ,Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Lang, Otacilio de A.; Quaresma, Amandio [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    1998-07-01

    Located at an average distance of 70 km from the coast and circa of 16 km from the Garoupa platform, the pole represents an approximate area of 500 square kilometers with various accumulations of hydrocarbons, such as Pargo, Carapeba and Vermelho fields, discovered on january 1975, february 1982 and december 1982, respectively. This project aimed to modernize the Northeast Pole platforms for operational optimization, cost reduction and productivity increase adjusting the pole to the strategic plan of E and P automation. An attempt was made of implement the 'Future Platform' project. The automation will allow the manpower availability for new projects and areas with manpower shortage, increasing of unities time life and revenue.

  19. HETE Satellite Power Subsystem

    OpenAIRE

    1993-01-01

    The HETE (High-Energy Transient Experiment) satellite a joint project between MIT's Center for Space Research and AeroAstro. is a high-energy gamma-ray burst/X-Ray/UV observatory platform. HETE will be launched into a 550 km circular orbit with an inclination of 37.7°, and has a design lifetime of 18 months. This paper presents a description of the spacecraft's power subsystem, which collects, regulates, and distributes power to the experiment payload modules and to the various spacecraft sub...

  20. Communications satellites - The experimental years

    Science.gov (United States)

    Edelson, B. I.

    1983-10-01

    Only eight years after the launc of Sputnik-1 by the Soviet Union, the first commercial satellite, 'Early Bird', entered service. In just twelve years commercial satellite service extended around the earth and became profitable. The reasons for the successful development of the communications satellite services in a comparatively short time are considered. These reasons are related to the presence of three ingredients, taking into account technology to create the system, communications requirements to form a market, and a management structure to implement the system. The formation of the concept of using earth orbiting satellites for telecommunications is discussed. It is pointed out that the years from 1958 to 1964 were the true 'experimental years' for satellite communications. The rapid development of technology during this crucial period is described, giving attention to passive satellites, active systems, and development satellites.

  1. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2013-01-01

    Top space experts from around the world have collaborated to produce this comprehensive, authoritative, and clearly illustrated reference guide to the fast growing, multi-billion dollar field of satellite applications and space communications. This handbook, done under the auspices of the International Space University based in France, addresses not only system technologies but also examines market dynamics, technical standards and regulatory constraints. The handbook is a completely multi-disciplinary reference book that covers, in an in-depth fashion, the fields of satellite telecommunications, Earth observation, remote sensing, satellite navigation, geographical information systems, and geosynchronous meteorological systems. It covers current practices and designs as well as advanced concepts and future systems. It provides a comparative analysis of the common technologies and design elements for satellite application bus structures, thermal controls, power systems, stabilization techniques, telemetry, com...

  2. Modular High-Energy Systems for Solar Power Satellites

    Science.gov (United States)

    Howell, Joe T.; Carrington, Connie K.; Marzwell, Neville I.; Mankins, John C.

    2006-01-01

    Modular High-Energy Systems are Stepping Stones to provide capabilities for energy-rich infrastructure located in space to support a variety of exploration scenarios as well as provide a supplemental source of energy during peak demands to ground grid systems. Abundant renewable energy at lunar or other locations could support propellant production and storage in refueling scenarios that enable affordable exploration. Renewable energy platforms in geosynchronous Earth orbits can collect and transmit power to satellites, or to Earth-surface locations. Energy-rich space technologies also enable the use of electric-powered propulsion systems that could efficiently deliver cargo and exploration facilities to remote locations. A first step to an energy-rich space infrastructure is a 100-kWe class solar-powered platform in Earth orbit. The platform would utilize advanced technologies in solar power collection and generation, power management and distribution, thermal management, electric propulsion, wireless avionics, autonomous in space rendezvous and docking, servicing, and robotic assembly. It would also provide an energy-rich free-flying platform to demonstrate in space a portfolio of technology flight experiments. This paper summary a preliminary design concept for a 100-kWe solar-powered satellite system to demonstrate in-flight a variety of advanced technologies, each as a separate payload. These technologies include, but are not limited to state-of-the-art solar concentrators, highly efficient multi-junction solar cells, integrated thermal management on the arrays, and innovative deployable structure design and packaging to enable the 100-kW satellite feasible to launch on one existing launch vehicle. Higher voltage arrays and power distribution systems (PDS) reduce or eliminate the need for massive power converters, and could enable direct-drive of high-voltage solar electric thrusters.

  3. The Geohazards Exploitation Platform

    Science.gov (United States)

    Laur, Henri; Casu, Francesco; Bally, Philippe; Caumont, Hervé; Pinto, Salvatore

    2016-04-01

    The Geohazards Exploitation Platform, or Geohazards TEP (GEP), is an ESA originated R&D activity of the EO ground segment to demonstrate the benefit of new technologies for large scale processing of EO data. This encompasses on-demand processing for specific user needs, systematic processing to address common information needs of the geohazards community, and integration of newly developed processors for scientists and other expert users. The platform supports the geohazards community's objectives as defined in the context of the International Forum on Satellite EO and Geohazards organised by ESA and GEO in Santorini in 2012. The GEP is a follow on to the Supersites Exploitation Platform (SSEP) an ESA initiative to support the Geohazards Supersites & Natural Laboratories initiative (GSNL). Today the GEP allows to exploit 70+ Terabyte of ERS and ENVISAT archive and the Copernicus Sentinel-1 data available on line. The platform has already engaged 22 European early adopters in a validation activity initiated in March 2015. Since September, this validation has reached 29 single user projects. Each project is concerned with either integrating an application, running on demand processing or systematically generating a product collection using an application available in the platform. The users primarily include 15 geoscience centres and universities based in Europe: British Geological Survey (UK), University of Leeds (UK), University College London (UK), ETH University of Zurich (CH), INGV (IT), CNR-IREA and CNR-IRPI (IT), University of L'Aquila (IT), NOA (GR), Univ. Blaise Pascal & CNRS (FR), Ecole Normale Supérieure (FR), ISTERRE / University of Grenoble-Alpes (FR). In addition, there are users from Africa and North America with the University of Rabat (MA) and the University of Miami (US). Furthermore two space agencies and four private companies are involved: the German Space Research Centre DLR (DE), the European Space Agency (ESA), Altamira Information (ES

  4. One common structural peculiarity of the Solar system bodies including the star, planets, satellites and resulting from their globes rotation

    Science.gov (United States)

    Kochemasov, , G. G.

    2008-09-01

    Often observed a sensible difference in appearance and structure between tropical and extra-tropical zones of various heavenly bodies including rocky and gas planets, satellites and Sun compels to look for a common reason of such phenomenon. All bodies rotate and their spherical shape makes zones at different latitudes to have differing angular momenta as a distance to the rotation axis diminishes gradually from the equator to the poles (this is felt particularly when one launches rockets into space -preferable more cheap launches are from the equatorial regions - Kourou is better than Baikonur). One of remarkable changes occurs at tropics. As a single rotating planetary body tends to have angular momenta of its tectonic blocks equilibrated it starts mechanisms leveling this basic physical property. At tropical zones (bulged also due to the rotation ellipsoid) the outer shell - crust as a consequence tends to be destroyed, sunk, subsided and shrunk; a density of crust material changes; the atmosphere reacts changing chemistry and structure; in terrestrial anthroposphere man looses its mass and stature. But according to the Le Chatelier rule mechanisms with an opposing tendency also begin to act. At Earth the wide planetary long tropical zone is marked by destruction of the crust. It is demonstrated by development of numerous islands of the Malay Archipelago (the Sunda Isls., Maluku Isls, Philippines) between the Southeastern Asia and Australia. In Africa and South America huge depressions of the Congo and Amazon Rivers develops where the Archean crust is subsided to depths of more than 2 km. In the Pacific along the equator numerous islands of Micronesia occur. Subsidence of the basaltic oceanic crust is followed by an intensive folding and faulting of basalt and sedimentary layers (Fig. 1) as a larger mass must be held by a smaller space (a planetary radius is diminished). The central Atlantic is very demonstrative in this sense suffering huge transform fault

  5. A Typology of Multi-sided Platforms

    DEFF Research Database (Denmark)

    Staykova, Kalina Stefanova; Damsgaard, Jan

    2015-01-01

    which evolved several steps into being multi-sided (Facebook). Our analysis shows a structural difference between one-sided, two-sided and multi-sided platforms and that platforms consist of a core and potentially also a periphery. The sides of a platform and the ties which connect them can be arranged...

  6. Satellite Communications

    CERN Document Server

    Pelton, Joseph N

    2012-01-01

    The field of satellite communications represents the world's largest space industry. Those who are interested in space need to understand the fundamentals of satellite communications, its technology, operation, business, economic, and regulatory aspects. This book explains all this along with key insights into the field's future growth trends and current strategic challenges. Fundamentals of Satellite Communications is a concise book that gives all of the key facts and figures as well as a strategic view of where this dynamic industry is going. Author Joseph N. Pelton, PhD, former Dean of the International Space University and former Director of Strategic Policy at Intelstat, presents a r

  7. Video analysis platform

    OpenAIRE

    FLORES, Pablo; Arias, Pablo; Lecumberry, Federico; Pardo, Álvaro

    2006-01-01

    In this article we present the Video Analysis Platform (VAP) which is an open source software framework for video analysis, processing and description. The main goals of VAP are: to provide a multiplatform system which allows the easy implementation of video algorithms, provide structures and algorithms for the segmentation of video data in its different levels of abstraction: shots, frames, objects, regions, etc, permit the generation and comparison of MPEG7-like descriptors, and develop tes...

  8. Satellite Geomagnetism

    DEFF Research Database (Denmark)

    Olsen, Nils; Stolle, Claudia

    2012-01-01

    Observations of Earth’s magnetic field from space began more than 50 years ago. A continuous monitoring of the field using low Earth orbit (LEO) satellites, however, started only in 1999, and three satellites have taken highprecision measurements of the geomagnetic field during the past decade...... ability to characterize and understand the many sources that contribute to Earth’s magnetic field. In this review, we summarize investigations of Earth’s interior and environment that have been possible through the analysis of high-precision magnetic field observations taken by LEO satellites........ The unprecedented time-space coverage of their data opened revolutionary new possibilities for monitoring, understanding, and exploring Earth’s magnetic field. In the near future, the three-satellite constellation Swarm will ensure continuity of such measurement and provide enhanced possibilities to improve our...

  9. 3D printed electromagnetic transmission and electronic structures fabricated on a single platform using advanced process integration techniques

    Science.gov (United States)

    Deffenbaugh, Paul Issac

    3D printing has garnered immense attention from many fields including in-office rapid prototyping of mechanical parts, outer-space satellite replication, garage functional firearm manufacture, and NASA rocket engine component fabrication. 3D printing allows increased design flexibility in the fabrication of electronics, microwave circuits and wireless antennas and has reached a level of maturity which allows functional parts to be printed. Much more work is necessary in order to perfect the processes of 3D printed electronics especially in the area of automation. Chapter 1 shows several finished prototypes of 3D printed electronics as well as newly developed techniques in fabrication. Little is known about the RF and microwave properties and applications of the standard materials which have been developed for 3D printing. Measurement of a wide variety of materials over a broad spectrum of frequencies up to 10 GHz using a variety of well-established measurement methods is performed throughout chapter 2. Several types of high frequency RF transmission lines are fabricated and valuable model-matched data is gathered and provided in chapter 3 for future designers' use. Of particular note is a fully 3D printed stripline which was automatically fabricated in one process on one machine. Some core advantages of 3D printing RF/microwave components include rapid manufacturing of complex, dimensionally sensitive circuits (such as antennas and filters which are often iteratively tuned) and the ability to create new devices that cannot be made using standard fabrication techniques. Chapter 4 describes an exemplary fully 3D printed curved inverted-F antenna.

  10. Satellite (Natural)

    Science.gov (United States)

    Murdin, P.

    2000-11-01

    In its most general sense, any celestial object in orbit around a similar larger object. Thus, for example, the Magellanic Clouds are satellite galaxies of our own Milky Way galaxy. Without qualification, the term is used to mean a body in orbit around a planet; an alternative term is moon. The term natural satellite distinguishes these bodies from artificial satellites—spacecraft placed in orbi...

  11. The multifractal structure of satellite sea surface temperature maps can be used to obtain global maps of streamlines

    Directory of Open Access Journals (Sweden)

    A. Turiel

    2009-01-01

    Full Text Available Nowadays Earth observation satellites provide information about many relevant variables of the ocean-climate system, such as temperature, moisture, aerosols, etc. However, to retrieve the velocity field, which is the most relevant dynamical variable, is still a technological challenge, specially in the case of oceans. New processing techniques, emerged from the theory of turbulent flows, have come to assist us in this task. In this paper, we show that multifractal techniques applied to new Sea Surface Temperature satellite products opens the way to build maps of ocean currents with unprecedented accuracy. With the application of singularity analysis, we show that global ocean circulation patterns can be retrieved in a daily basis. We compare these results with high-quality altimetry-derived geostrophic velocities, finding a quite good correspondence of the observed patterns both qualitatively and quantitatively. The implications of this findings from the perspective both of theory and of operational applications are discussed.

  12. Plat_Forms -- a contest: The web development platform comparison

    CERN Document Server

    Prechelt, Lutz

    2008-01-01

    "Plat_Forms" is a competition in which top-class teams of three programmers compete to implement the same requirements for a web-based system within 30 hours, each team using a different technology platform (Java EE, .NET, PHP, Perl, Python, or Ruby on Rails). The results will provide new insights into the real (rather than purported) pros, cons, and emergent properties of each platform. The evaluation will analyze many aspects of each solution, both external (usability, functionality, reliability, performance, etc.) and internal (structure, understandability, flexibility, etc.).

  13. Multi-platform Integrated Positioning and Attitude Determination using GNSS

    NARCIS (Netherlands)

    Buist, P.J.

    2013-01-01

    There is trend in spacecraft engineering toward distributed systems where a number of smaller spacecraft work as a larger satellite. However, in order to make the small satellites work together as a single large platform, the precise relative positions (baseline) and orientations (attitude) of the e

  14. 卫星平台虚拟化--满足多种卫星移动通信需求的必然选择%Virtualizing the On-Board Platform for Multi-Purpose Mobile Satellite Communication Systems

    Institute of Scientific and Technical Information of China (English)

    王京; 赵明; 高镇

    2015-01-01

    The market for mobile satel ite communication is huge in China, but satel ite resources are very limited. A key issue in the development of mobile satel ite communication in China is the efficient utilization of the satel ite platform to satisfy the requirements of different military and public applications. Virtualization of the on-board platform is an effective way of addressing this issue. In this paper, we propose a virtualization design based on FFT. This design can be a reference for on research on-board platform virtualization.%认为虽然中国卫星移动通信市场巨大但卫星资源紧缺,因此充分利用有限的卫星平台,最大限度满足不同军民通信应用需求并支持多种传输体制,是中国发展卫星移动通信系统必须要解决的重要问题,而卫星平台虚拟化是解决这个矛盾的有效途径。基于此,提出了一种基于快速傅里叶变换(FFT)的虚拟化设计方案,为推动卫星平台虚拟化研究提供参考。

  15. Satellite and hypersatellite structures of Lα1,2 and Lβ1 x-ray transitions in mid-Z atoms multiply ionized by fast oxygen ions

    OpenAIRE

    Czarnota, M.; Banaś, D; Berset, Michel; Chmielewska, D; Dousse, Jean-Claude; Hoszowska, Joanna; Maillard, Yves-Patrick; Mauron, Olivier; Pajek, M.; Polasik, M.; Raboud, Pierre-Alexandre; Rzadkiewicz, J.; Słabkowska, K.; Sujkowski, Z.

    2014-01-01

    A detailed investigation of the Lα1,2 (L3→M4,5) and Lβ1 (L2→M4) x-ray satellite and hypersatellite structures in zirconium, molybdenum, and palladium atoms multiply ionized by impact with 278.6-MeV oxygen ions is reported. The x-ray spectra were measured with a high-resolution von Hamos bent crystal spectrometer. For the interpretation of the complex spectral features, relativistic multiconfiguration Dirac-Fock calculations were performed for all multivacancy configurations expected to contri...

  16. The FLP microsatellite platform flight operations manual

    CERN Document Server

    2016-01-01

    This book represents the Flight Operations Manual for a reusable microsatellite platform – the “Future Low-cost Platform” (FLP), developed at the University of Stuttgart, Germany. It provides a basic insight on the onboard software functions, the core data handling system and on the power, communications, attitude control and thermal subsystem of the platform. Onboard failure detection, isolation and recovery functions are treated in detail. The platform is suited for satellites in the 50-150 kg class and is baseline of the microsatellite “Flying Laptop” from the University. The book covers the essential information for ground operators to controls an FLP-based satellite applying international command and control standards (CCSDS and ECSS PUS). Furthermore it provides an overview on the Flight Control Center in Stuttgart and on the link to the German Space Agency DLR Ground Station which is used for early mission phases. Flight procedure and mission planning chapters complement the book. .

  17. A satellite anemometer

    Science.gov (United States)

    Hanson, W. B.; Heelis, R. A.

    1995-01-01

    This report describes the design, development, and testing of components of a satellite anemometer, an instrument for measuring neutral winds in the upper atmosphere from a satellite platform. The device, which uses four nearly identical pressure sensors, measures the angle of arrival of the bulk neutral flow in the satellite frame of reference. It could also be used in a feedback loop to control spacecraft attitude with respect to the ram velocity direction. We have now developed miniaturized ionization pressure gauges that will work well from the slip flow region near 115 km up to the base of the exosphere, which covers the entire altitude range currently being considered for Tether. Laboratory tests have demonstrated a very linear response to changes in ram angle out to +/- 20 deg. (transverse wind component of 2.7 km s(exp -1)) from the ram, and a monotonic response to out beyond 45 deg. Pitch (vertical wind) and yaw (horizontal wind) can be sampled simultaneously and meaningfully up to 10 Hz. Angular sensitivity of 30 arc seconds (approximately 1 ms(exp -1) is readily attainable, but absolute accuracy for winds will be approximately 1 deg (130 m/s) unless independent attitude knowledge is available. The critical elements of the design have all been tested in the laboratory.

  18. Polymer Physics Prize Lecture: Self-assemblies of Giant Molecular Shape Amphiphiles as a New Platform for Engineering Structures with Sub-Nanometer Feature Sizes

    Science.gov (United States)

    Cheng, Stephen Z. D.

    2013-03-01

    Utilizing nano-building blocks rather than atoms to construct and engineer new structures is a fresh approach to design and develop functional materials for the purpose of transferring and amplifying microscopic functionality to macroscopic materials' property. As one of the important elements of these nano-building blocks, giant molecular shape amphiphiles (GMSAs) provide a latest platform for generating self-assembled ordered structures at nanometer scale, which are stabilized by collective physical bonds (such as collective hydrogen bonding). In this talk, two topics will be focused on. First, composed of functionalized hydrophilic molecular nanoparticles as the heads with rigid shape and fixed volume, and tethered polymer chains as the tails (such as giant molecular surfactants and lipids and other topologies), these GMSAs of various architectures can self-assemble into highly diversified, thermodynamically stable microstructures at sub-10 nm length scale in the bulk, thin film and solution states. Second, GMSAs could also be constructed solely from nanoparticles interconnected via different numbers of the rigid linkages in specific symmetry, simulating the overall shapes of small molecules but with sizes that are one-order of magnitude larger in length and three-order of magnitude larger in volume. Giant crystal structures can then be obtained from this class of ``giant molecules'' via supramolecular crystallization. These findings are not only scientifically intriguing in understanding the physical principles underlying their self-assembly, but also technologically relevant in industrial applications.

  19. OGC Collaborative Platform undercover

    Science.gov (United States)

    Buehler, G.; Arctur, D. K.; Bermudez, L. E.

    2012-12-01

    The mission of the Open Geospatial Consortium (OGC) is to serve as a global forum for the collaboration of developers and users of spatial data products and services, and to advance the development of international standards for geospatial interoperability. The OGC coordinates with over 400 institutions in the development of geospatial standards. OGC has a dedicated staff supported by a Collaborative Web Platform to enable sophisticated and successful coordination among its members. Since its origins in the early 1990s, the OGC Collaborative Web Platform has evolved organically to be the collaboration hub for standards development in the exchange of geospatial and related types of information, among a global network of thousands of technical, scientific and management professionals spanning numerous disparate application domains. This presentation describes the structure of this collaboration hub, the relationships enabled (both among and beyond OGC members), and how this network fits in a broader ecosystem of technology development and information standards organizations.

  20. CapsidMaps: protein-protein interaction pattern discovery platform for the structural analysis of virus capsids using Google Maps.

    Science.gov (United States)

    Carrillo-Tripp, Mauricio; Montiel-García, Daniel Jorge; Brooks, Charles L; Reddy, Vijay S

    2015-04-01

    Structural analysis and visualization of protein-protein interactions is a challenging task since it is difficult to appreciate easily the extent of all contacts made by the residues forming the interfaces. In the case of viruses, structural analysis becomes even more demanding because several interfaces coexist and, in most cases, these are formed by hundreds of contacting residues that belong to multiple interacting coat proteins. CapsidMaps is an interactive analysis and visualization tool that is designed to benefit the structural virology community. Developed as an improved extension of the φ-ψ Explorer, here we describe the details of its design and implementation. We present results of analysis of a spherical virus to showcase the features and utility of the new tool. CapsidMaps also facilitates the comparison of quaternary interactions between two spherical virus particles by computing a similarity (S)-score. The tool can also be used to identify residues that are solvent exposed and in the process of locating antigenic epitope regions as well as residues forming the inside surface of the capsid that interact with the nucleic acid genome. CapsidMaps is part of the VIPERdb Science Gateway, and is freely available as a web-based and cross-browser compliant application at http://viperdb.scripps.edu.

  1. Mobile sensor platforms: categorisation and research applications in precision farming

    OpenAIRE

    Zecha, C. W.; Link, J; CLAUPEIN, W.

    2013-01-01

    The usage of mobile sensor platforms arose in research a few decades ago. Since the beginning of satellite sensing, measurement principles and analysing methods have become widely implemented for aerial and ground vehicles. Mainly in Europe, the United States and Australia, sensor platforms in precision farming are used for surveying, monitoring and scouting tasks. This review gives an overview of available sensor platforms used in recent agricultural and related research pr...

  2. High-sensitive bioorthogonal SERS tag for live cancer cell imaging by self-assembling core-satellites structure gold-silver nanocomposite.

    Science.gov (United States)

    Chen, Meng; Zhang, Ling; Gao, Mingxia; Zhang, Xiangmin

    2017-09-01

    A novel, high-sensitivity, biocompatible SERS tag with core-shell structure based on gold nanoparticles containing alkynyl molecule core -silver nanoparticle satellites shell was fabricated for the first time to be used for live cancer cells Surface enhanced Raman scattering (SERS) imaging. (E)-2-((4-(phenylethynyl)benzylidene) amino) ethanethiol (PBAT) synthesized facilely in our lab is the Raman-silence region reporter which is advantage for bioorthogonal SERS cell imaging. In order to enhance the intensity of the Raman tags for live cancer cell imaging, a series of news measures have been adopted. Firstly, reporter molecules of the PBAT were added twice, which is embedded in the gold core with the reduction of tetrachloroaurate and then PBAT is conjugated again on disperse gold nanoparticles (PBAT-Au). Furthermore, numerous Ag nanoparticles self-assembly were densely arranged around PBAT-Au core surface (PBAT- Au@Ag), just like a circle of satellites cluster, which produce obvious "hot spots" effects enhancing the signal of the Raman tags enormously. Finally, Bovine serum albumin (BSA) and polydopamine (PDA) coated on the PBAT- Au@Ag successively, defined as (PBAT-Au@Ag@BSA@PDA), which make as-synthesized nanocomposites own features of bio-compatibility and facilitates antibody modification. Compared with Au@PBAT@PDA, PBAT-Au@Ag@BSA@PDA with core-shell satellites structure showed 10-fold increase in the Raman signals intensity. Moreover, PBAT-Au@Ag@BSA@PDA nanocomposites were successfully applied in the Raman imaging of human glioma cells (U251) by the recognition of the anti-epidermal growth factor receptor (EGFR). All experimental results demonstrated that the nanocomposites have high value and huge potential application in the live cancer cells imaging and biomedical diagnostics in the near future. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Regional surface melt constrained from exposed strata on the Greenland ice sheet using structural geology, satellite imagery and IcePod data.

    Science.gov (United States)

    Tinto, K. J.; Bell, R. E.; Porter, D. F.; Das, I.; Frearson, N.; Bertinato, C.; Boghosian, A.; Chu, W.; Creyts, T. T.; Dhakal, T.; Dong, L.; Starke, S. E.

    2014-12-01

    strata. By combining satellite and airborne observations we demonstrate that the apparent displacement of the exposed strata documents the increased surface melt over the last three decades. Integrating structural geology into the surface mass balance analysis provides unique insights into the spatial variability of melt across the region.

  4. Advancements of In-Flight Mass Moment of Inertia and Structural Deflection Algorithms for Satellite Attitude Simulators

    Science.gov (United States)

    2015-03-26

    on the air-bearing satellite attitude simulator at Shenyang University of Technology. Additionally, Chesi et al., [3] advanced the EKF developed by Kim...in a disturbance torque. The data for hrw about the test axis is then used to calculate the coefficients Arw and Brw that best fit the equation hrw...oscillation; and m, b, D, and E are coefficients that best fit the 51 0 10 20 30 40 50 −0.4 −0.3 −0.2 −0.1 0 0.1 0.2 0.3 0.4 time (s) A ng ul ar M om en

  5. Structural insights into substrate recognition by the Neurospora Varkud satellite ribozyme: importance of U-turns at the kissing-loop junction.

    Science.gov (United States)

    Bouchard, Patricia; Legault, Pascale

    2014-01-14

    Substrate recognition by the Neurospora Varkud satellite ribozyme depends on the formation of a magnesium-dependent kissing-loop interaction between the stem-loop I (SLI) substrate and stem-loop V (SLV) of the catalytic domain. From mutagenesis studies, it has been established that this I/V kissing-loop interaction involves three Watson-Crick base pairs and is associated with a structural rearrangement of the SLI substrate that facilitates catalysis. Here, we report the NMR structural characterization of this I/V kissing-loop using isolated stem-loops. NMR studies were performed on different SLI/SLV complexes containing a common SLV and shiftable, preshifted, or double-stranded SLI variants. These studies confirm the presence of three Watson-Crick base pairs at the kissing-loop junction and provide evidence for the structural rearrangement of shiftable SLI variants upon SLV binding. NMR structure determination of an SLI/SLV complex demonstrates that both the SLI and SLV loops adopt U-turn structures, which facilitates intermolecular Watson-Crick base pairing. Several other interactions at the I/V interface, including base triples and base stacking, help create a continuously stacked structure. These NMR studies provide a structural basis to understand the stability of the I/V kissing-loop interaction and lead us to propose a kinetic model for substrate activation in the VS ribozyme.

  6. Importance of using field spectroscopy to support the satellite remote sensing for underground structures intended for security reasons in the eastern Mediterranean region

    Science.gov (United States)

    Melillos, George; Themistocleous, Kyriacos; Papadavid, George; Agapiou, Athos; Prodromou, Maria; Michaelides, Silas; Hadjimitsis, Diofantos G.

    2016-10-01

    Underground structures can affect their surrounding landscapes in different ways such as soil moisture content, soil composition and vegetation vigor. Vegetation vigor is often observed on the ground as a crop mark; a phenomenon which can be used as a proxy to denote the presence of underground and not visible structures. This paper presents the results obtained from field spectroradiometric campaigns at `buried' underground structures in Cyprus. A SVC-HR1024 field spectroradiometer was used and in-band reflectances were calculated for the Landsat 5 TM medium spatial resolution satellite sensor. A number of vegetation indices such as NDVI, SR and EVI were obtained while a `smart index' was developed aiming for detection of underground military structures by using existing vegetation indices or other in-band algorithms. In this study, test areas were identified, analyzed and modeled. The areas have been analyzed and tested in different scenarios, including: (a) the `natural state' of the underground structure (b) the different type of crop over the underground structure and imported soil (c) the different types of non-natural material over the underground structure. A reference target in the nearby area was selected as a baseline. Controllable meteorological and environmental parameters were acquired and monitored.

  7. Selective silicification of Thalassinoides and other biogenic structures in marine platform limestones and hardground (Lower Albian, Sonabia, Cantabria

    Directory of Open Access Journals (Sweden)

    M. A. Bustillo

    2017-06-01

    Full Text Available In this work different types of chert from the Oriñón Limestone Formation (upper Aptian-lower Albian are studied. This formation outcrops in the eastern coast of Cantabria (Liendo-Castro Urdiales area and includes outstanding and abundant cherty nodules, lenticular layers and crusts. The host rock is mainly a biocalcarenite (wackestone/packstone of pellets, echinoids fragments, oysters, foraminifers and calcareous or calcified siliceous sponge spicules. The Oriñón Limestone Formation was deposited in a marine open-shelf environment and preserves a hardground of regional extent with particular chert crusts. The silica source is associated to the dissolution of siliceous sponge spicules or to their calcification. Most of the chert is constituted by mosaics of micro-cryptocrystalline quartz and calcedonite, and it is generated by the selective silicification of biogenic structures, mainly dwelling trace fossils (Thalassinoides isp. because of the higher amount of organic matter and the higher porosity and permeability of the burrow infill. In the hardground, selective silicification affects body fossils such as belemnites, oysters and echinoids, and trace fossils (feeding burrows and borings where in addition cherts is accumulated as an indeterminate crust. The silicification of the biogenic structures firstly occurred in form of opaline phases during the early diagenesis while the oxidation of the organic matter was active. Thus, Thalassinoides trace fossils affected by silicification preserve filaments and cocoids that might have had a microbial origin. Neoformation of dolomite and calcite occur only within the Thalassinoides trace fossils which indicates that diagenetic processes taking place within these burrows differed from those affecting the host rock and other biogenic structures. Dwelling trace fossils would have supposed a close micro-environment where the oxidation conditions changed from high to low rate.

  8. Scientific Satellites

    Science.gov (United States)

    1967-01-01

    followed Hale’s into orbit. In 1879, Jules Verne wrote about launching small satellites with a gun possessing a muzzle velocity of 10 000 m/sec (ref. 3...was activated in 1950.11 It was located only a few tens of miles from the spot where Jules Verne had his Baltimore Gun Club fire a manned projectile to...principle, satellites can be launched by a single impulse applied at the Earth’s surface-say, with a large cannon, & la Jules Verne (sec. 8-3). In

  9. Using Small Drone (UAS) Imagery to Bridge the Gap Between Field- and Satellite-Based Measurements of Vegetation Structure and Change

    Science.gov (United States)

    Mayes, M. T.; Estes, L. D.; Gago, X.; Debats, S. R.; Caylor, K. K.; Manfreda, S.; Oudemans, P.; Ciraolo, G.; Maltese, A.; Nadal, M.; Estrany, J.

    2016-12-01

    Leaf area is an important ecosystem variable that relates to vegetation biomass, productivity, water and nutrient use in natural and agricultural systems globally. Since the 1980s, optical satellite image-based estimates of leaf area based on indices such as Normalized Difference Vegetation Index (NDVI) have greatly improved understanding of vegetation structure, function, and responses to disturbance at landscape (10^3 km2) to continental (10^6 km2) spatial scales. However, at landscape scales, satellites have failed to capture many leaf area patterns indicative of vegetation succession, crop types, stress and other conditions important for ecological processes. Small drones (UAS - unmanned aerial systems) offer new means for assessing leaf area and vegetation structure at higher spatial resolutions (changes and variability, including vegetation recovery from fire (Mallorca), and leaf-area and biomass variability due to orchard type and agro-ecosystem management (Matera, New Jersey). Finally, we highlight promising ways forward for improving field data collection and the use of UAS observations to monitor vegetation leaf-area and biomass change at landscape scales in natural and agricultural systems.

  10. Platform evolution studies

    Science.gov (United States)

    Walton, Barbara A.

    1990-01-01

    The polar orbiting platform (POP), being developed by the Work Package 3 (WP3) Project at the Goddard Space Flight Center, will play a key role in the NASA Leadership Initiative, Mission to Planet Earth (MPE). It becomes, with the addition of payloads, an Earth observation satellite observatory. Mission to Planet Earth also has geostationary platforms (GEOP) as part of its global observational system. A study was begun in March 1988 to assess the applicability of the POP orbital replacement units (ORUs) for a geostationary Earth observing mission. Two test cases, representative of MPE payloads, were studied. Case A was used to emphasize the GEOP configuration and design; it used a Titan/Centaur to achieve orbit. Case B, considered to be much further in the future, included some assembly at the Space Station Freedom manned base and use of an orbital transfer vehicle to achieve orbit; requirements on the manned base to support such a mission were emphasized. The study found the POP systems more than adequate to meet GEOP requirements. Two types of changes were required for the POP ORUs: (1) modification to use only one surface for heat rejection; for the battery ORU, this meant 'opening up' the ORU to retain the radiator area with a corresponding decrease in depth; and (2) deletion of equipment not needed. The Case A configuration was shown to be within the planned capability of the Titan IV/Centaur. Assembly requirements were included for the Case B configuration, which is driven by the large microwave antennas of two of the payloads. The final review was April 19, 1989.

  11. The multifractal structure of satellite sea surface temperature maps can be used to obtain global maps of streamlines

    Directory of Open Access Journals (Sweden)

    A. Turiel

    2009-10-01

    Full Text Available Nowadays Earth observation satellites provide information about many relevant variables of the ocean-climate system, such as temperature, moisture, aerosols, etc. However, to retrieve the velocity field, which is the most relevant dynamical variable, is still a technological challenge, specially in the case of oceans. New processing techniques, emerged from the theory of turbulent flows, have come to assist us in this task. In this paper, we show that multifractal techniques applied to new Sea Surface Temperature satellite products opens the way to build maps of ocean currents with unprecedented accuracy. With the application of singularity analysis, we show that global ocean circulation patterns can be retrieved in a daily basis. We compare these results with high-quality altimetry-derived geostrophic velocities, finding a quite good correspondence of the observed patterns both qualitatively and quantitatively; and this is done for the first time on a global basis, even for less active areas. The implications of this findings from the perspective both of theory and of operational applications are discussed.

  12. Vertical Relationships within Platform Marketplaces

    Directory of Open Access Journals (Sweden)

    Mark J. Tremblay

    2016-07-01

    Full Text Available In two-sided markets a platform allows consumers and sellers to interact by creating sub-markets within the platform marketplace. For example, Amazon has sub-markets for all of the different product categories available on its site, and smartphones have sub-markets for different types of applications (gaming apps, weather apps, map apps, ridesharing apps, etc.. The network benefits between consumers and sellers depend on the mode of competition within the sub-markets: more competition between sellers lowers product prices, increases the surplus consumers receive from a sub-market, and makes platform membership more desirable for consumers. However, more competition also lowers profits for a seller which makes platform membership less desirable for a seller and reduces seller entry and the number of sub-markets available on the platform marketplace. This dynamic between seller competition within a sub-market and agents’ network benefits leads to platform pricing strategies, participation decisions by consumers and sellers, and welfare results that depend on the mode of competition. Thus, the sub-market structure is important when investigating platform marketplaces.

  13. VSDMIP 1.5: an automated structure- and ligand-based virtual screening platform with a PyMOL graphical user interface.

    Science.gov (United States)

    Cabrera, Álvaro Cortés; Gil-Redondo, Rubén; Perona, Almudena; Gago, Federico; Morreale, Antonio

    2011-09-01

    A graphical user interface (GUI) for our previously published virtual screening (VS) and data management platform VSDMIP (Gil-Redondo et al. J Comput Aided Mol Design, 23:171-184, 2009) that has been developed as a plugin for the popular molecular visualization program PyMOL is presented. In addition, a ligand-based VS module (LBVS) has been implemented that complements the already existing structure-based VS (SBVS) module and can be used in those cases where the receptor's 3D structure is not known or for pre-filtering purposes. This updated version of VSDMIP is placed in the context of similar available software and its LBVS and SBVS capabilities are tested here on a reduced set of the Directory of Useful Decoys database. Comparison of results from both approaches confirms the trend found in previous studies that LBVS outperforms SBVS. We also show that by combining LBVS and SBVS, and using a cluster of ~100 modern processors, it is possible to perform complete VS studies of several million molecules in less than a month. As the main processes in VSDMIP are 100% scalable, more powerful processors and larger clusters would notably decrease this time span. The plugin is distributed under an academic license upon request from the authors. © Springer Science+Business Media B.V. 2011

  14. Structure and genetic mechanisms of the Precambrian rifts of the East-European Platform in Russia by integrated study of seismic, gravity, and magnetic data

    Science.gov (United States)

    Kostyuchenko, S. L.; Egorkin, A. V.; Solodilov, L. N.

    1999-11-01

    Integrated models of the deep structure and origin of rifts located within the Russian portion of the East-European Platform have been developed from recent DSS results, new gravity and magnetic modelling, and geological and older geophysical data acquired over the last 50 years. The Mezen rift province, the Middle-Russian rift, the Valday rift, the Pachelma rift, and the rifts within the Pre-Caspian depression were studied. All of these rifts were affected by extension and filled with syn-rift sediments at different times through the Riphean (1650-650 Ma). Post-rift sedimentary basins developed from the end of the Neoproterozoic until the Cenozoic. The models indicate that the crustal structure and genesis of the individual rifts are different. The Mezen rift province was formed under a condition of limited extension of the continental crust. The McKenzie pure strain mechanism is acceptable for lithosphere extension in the Middle-Russian rift. The Wernicke model best expresses the Valday and Pachelma rifts. The rift process in the Pre-Caspian area is explained in terms of large-scale sliding apart of lithospheric plates, and approached the stage of development of oceanic crust.

  15. A new strategy toward Internet of Things: structural health monitoring using a combined fiber optic and acoustic emission wireless sensor platform

    Science.gov (United States)

    Nguyen, A. D.; Page, C.; Wilson, C. L.

    2016-04-01

    This paper investigates a new low-power structural health monitoring (SHM) strategy where fiber Bragg grating (FBG) rosettes can be used to continuously monitor for changes in a host structure's principal strain direction, suggesting damage and thus enabling the immediate triggering of a higher power acoustic emissions (AE) sensor to provide for better characterization of the damage. Unlike traditional "always on" AE platforms, this strategy has the potential for low power, while the wireless communication between different sensor types supports the Internet of Things (IoT) approach. A combination of fiber-optic sensor rosettes for strain monitoring and a fiber-optic sensor for acoustic emissions monitoring was attached to a sample and used to monitor crack initiation. The results suggest that passive principal strain direction monitoring could be used as a damage initiation trigger for other active sensing elements such as acoustic emissions. In future work, additional AE sensors can be added to provide for damage location; and a strategy where these sensors can be powered on periodically to further establish reliability while preserving an energy efficient scheme can be incorporated.

  16. Structure-Based Rational Design of Prodrugs To Enable Their Combination with Polymeric Nanoparticle Delivery Platforms for Enhanced Antitumor Efficacy**

    Science.gov (United States)

    Wang, Hangxiang; Xie, Haiyang; Wu, Jiaping; Wei, Xuyong; Zhou, Lin; Xu, Xiao; Zheng, Shusen

    2014-01-01

    Drug-loaded nanoparticles (NPs) are of particular interest for efficient cancer therapy due to their improved drug delivery and therapeutic index in various types of cancer. However, the encapsulation of many chemotherapeutics into delivery NPs is often hampered by their unfavorable physicochemical properties. Here, we employed a drug reform strategy to construct a small library of SN-38 (7-ethyl-10-hydroxycamptothecin)-derived prodrugs, in which the phenolate group was modified with a variety of hydrophobic moieties. This esterification fine-tuned the polarity of the SN-38 molecule and enhanced the lipophilicity of the formed prodrugs, thereby inducing their self-assembly into biodegradable poly(ethylene glycol)-block-poly(d,l-lactic acid) (PEG-PLA) nanoparticulate structures. Our strategy combining the rational engineering of prodrugs with the pre-eminent features of conventionally used polymeric materials should open new avenues for designing more potent drug delivery systems as a therapeutic modality. PMID:25196427

  17. Repair of the 3' proximal and internal deletions of a satellite RNA associated with Cucumber mosaic virus is directed toward restoring structural integrity.

    Science.gov (United States)

    Kwon, Sun-Jung; Chaturvedi, Sonali; Rao, A L N

    2014-02-01

    The phenomenon of rapid turnover of 3' proximal nucleotides (nt) lost by the action of nuclease in RNA viruses is integral to replication. Here, a set of six deletions encompassing the 3' 23 nt region of a satellite RNA (satRNA) of Cucumber mosaic virus (CMV) strain Q (Q-sat), were engineered. Repair of the 3' end was not observed in the absence of CMV. However, co-expression with CMV in planta revealed that Q-sat mutants lacking the 3' 18 nt but not the 3' 23 nt are repaired and the progeny accumulation was inversely proportional to the extent of the deletion. Progeny of the 3'Δ3 mutant were repaired to wild type (wt) while those from the remaining four mutants were heterogeneous, exhibiting a wt secondary structure. Analysis of additional 3' internal deletions mutants revealed that progeny with a repaired sequence reminiscent of wt secondary structure were competent for replication and systemic spread.

  18. Aerial imagery and structure-from-motion based DEM reconstruction of region-sized areas (Sierra Arana, Spain and Namur Province, Belgium) using an high-altitude drifting balloon platform.

    Science.gov (United States)

    Burlet, Christian; María Mateos, Rosa; Azañón, Jose Miguel; Perez, José Vicente; Vanbrabant, Yves

    2015-04-01

    A new type of untethered balloon based mapping platform allows affordable remote sensing applications from higher altitudes and with a greater range and payload capacity than common motorized UAV's. The airborne device, called "Stratochip", is based on a dual helium balloons configuration. At a defined altitude (comprised between 1000 and 30000m), the first balloon is released, drastically reducing the platform climbing rate. The payload (up to 10kg) can then drift in a sub-horizontal trajectory until it leaves a pre-defined area of interest. Leaving the pre-defined area, the second balloon is released and the payload is recovered after a parachute landing. The predicted flight path of the Stratochip, launch site and surveyed area are calculated using both forecasted (NOAA model) and real-time (inborne instruments) meteorological data, along with the physical parameters of the balloons and parachute. The predicted recovery area can also be refined in real-time to secure and facilitate equipment retrieval. In this study, we present the results of two cartographic campaigns made in Belgium (Famennian outcrops near Beauraing, Namur Province) and Spain (karstic field in the Eastern part of Sierra Arana, Granada region). Those campaigns aimed to test the usability of the Stratochip to survey a large area at medium altitudes (3000m-8000m) and produced an updated Digital Elevation Model and orthophoto mosaic of those regions. For that purpose, the instrument installed in the Stratochip payload was constituted of a digital camera stabilized with two IMU's and two brushless motors. An automated routine then tilted the camera at predefined angles while taking pictures of the ground. This technique allowed to maximize the photogrammetric information collected on a single pass flight, and improved the DEM reconstruction quality, using structure-from-motion algorithms. Three sets of data (DEM + orthophoto) were created from those campaigns, using pictures sets collected a

  19. A Collective Detection Based GPS Receiver for Small Satellites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To solve the problem of autonomous navigation on small satellite platforms less than 20 kg, we propose to develop an onboard orbit determination receiver for small...

  20. Inforna 2.0: A Platform for the Sequence-Based Design of Small Molecules Targeting Structured RNAs.

    Science.gov (United States)

    Disney, Matthew D; Winkelsas, Audrey M; Velagapudi, Sai Pradeep; Southern, Mark; Fallahi, Mohammad; Childs-Disney, Jessica L

    2016-06-17

    The development of small molecules that target RNA is challenging yet, if successful, could advance the development of chemical probes to study RNA function or precision therapeutics to treat RNA-mediated disease. Previously, we described Inforna, an approach that can mine motifs (secondary structures) within target RNAs, which is deduced from the RNA sequence, and compare them to a database of known RNA motif-small molecule binding partners. Output generated by Inforna includes the motif found in both the database and the desired RNA target, lead small molecules for that target, and other related meta-data. Lead small molecules can then be tested for binding and affecting cellular (dys)function. Herein, we describe Inforna 2.0, which incorporates all known RNA motif-small molecule binding partners reported in the scientific literature, a chemical similarity searching feature, and an improved user interface and is freely available via an online web server. By incorporation of interactions identified by other laboratories, the database has been doubled, containing 1936 RNA motif-small molecule interactions, including 244 unique small molecules and 1331 motifs. Interestingly, chemotype analysis of the compounds that bind RNA in the database reveals features in small molecule chemotypes that are privileged for binding. Further, this updated database expanded the number of cellular RNAs to which lead compounds can be identified.

  1. On the role of the cis Hoogsteen:sugar-edge family of base pairs in platforms and triplets-quantum chemical insights into RNA structural biology.

    Science.gov (United States)

    Sharma, Purshotam; Sponer, Judit E; Sponer, Jirí; Sharma, Sitansh; Bhattacharyya, Dhananjay; Mitra, Abhijit

    2010-03-11

    Base pairs belonging to the cis Hoogsteen:sugar-edge (H:S) family play important structural roles in folded RNA molecules. Several of these are present in internal loops, where they are involved in interactions leading to planar dinucleotide platforms which stabilize higher order structures such as base triplets and quartets. We report results of analysis of 30 representative examples spanning 16 possible base pair combinations, with several of them showing multimodality of base pairing geometry. The geometries of 23 of these base pairs were modeled directly from coordinates extracted from RNA crystal structures. The other seven were predicted structures which were modeled on the basis of observed isosteric analogues. After appropriate satisfaction of residual valencies, these structures were relaxed using the B3LYP/6-31G(d,p) method and interaction energies were derived at the RIMP2/aug-cc-pVDZ level of theory. The geometries for each of the studied base pairs have been characterized in terms of the number and nature of H-bonds, rmsd values observed on optimization, base pair geometrical parameters, and sugar pucker analysis. In addition to its evaluation, the nature of intermolecular interaction in these complexes was also analyzed using Morokuma decomposition. The gas phase interaction energies range between -5.2 and -20.6 kcal/mol and, in contrast to the H:S trans base pairs, show enhanced relative importance of the electron correlation component, indicative of the greater role of dispersion energy in stabilization of these base pairs. The rich variety of hydrogen bonding pattern, involving the flexible sugar edge, appears to hold the key to several features of structural motifs, such as planarity and propensity to participate in triplets, observed in this family of base pairs. This work explores these aspects by integrating database analysis, and detailed base pairing geometry analysis at the atomistic level, with ab initio computation of interaction energies

  2. Origin, structure and exposure history of a wave-cut platform more than 1 Ma in age at the coast of northern Spain: A multiple cosmogenic nuclide approach

    Science.gov (United States)

    Alvarez-Marrón, J.; Hetzel, R.; Niedermann, S.; Menéndez, R.; Marquínez, J.

    2008-01-01

    Along the Asturian coast of northern Spain an uplifted wave-cut platform extends for ˜ 100 km east-west. The steep cliff which bounds the gently seaward-dipping platform to the north increases in height from 30 m in the west to 100 m in the east and reflects the overall eastward increase in platform elevation. The southern edge of the 2-4 km-wide platform runs along the foothills of the Cantabrian Mountains, as constrained by a high-resolution digital elevation model. The marine platform, which was carved into deformed Paleozoic bedrock with abundant quartzite beds, is largely covered by weathered marine and continental sediments. Quartzite samples from flat bedrock outcrops which are currently not covered by sediment or soil yield cosmogenic nuclide concentrations ( 21Ne, 10Be and 26Al) that demonstrate a long and complex exposure history, including periods of burial with partial or complete shielding from cosmic rays. The combination of multiple cosmogenic nuclides yields a minimum age of 1-2 Ma for the platform. Taking into account (i) the horizontal and vertical extent of the platform, (ii) the high resistance to erosion of the quartzitic bedrock, and (iii) published data on the magnitude of past sea level fluctuations, we suggest that the wave-cut platform formed in the Pliocene. Subvertical faults cutting the platform at high angles to the coastline offset the southern edge of the platform by 20 to 40 m and reactivate the pre-existing anisotropy in the Paleozoic bedrock. Uplift and crustal deformation of the coastal region have occurred after platform formation in the Pliocene and may still be active. The slow deformation of the northern edge of the Iberian plate including the Cantabrian Mountains may result from the ongoing slow convergence at an incipient subduction zone extending along the coast of northern Spain.

  3. The crustal structure of the eastern Fennoscandian Shield and central part of the East-European platform based on seismic, regional geophysic and geological data

    Science.gov (United States)

    Mints, M. V.; Berzin, R. G.; Babayants, P. S.; Konilov, A. N.; Suleimanov, A. K.; Zamozhniaya, N. G.; Zlobin, V. L.

    2003-04-01

    The 1-EU and 4B CDP transects worked out during 1998-2002 years by "Spetsgeophyzica", together with previously developed CDP profiles, have crossed most of the main tectonic units of the eastern Fennoscandian Shield and central part of the East-European platform. They provide seismic images of the Early Precambrian crust and upper mantle from the surface to about 80 km depth (25 s). The Neoarchaean granite-greenstone complexes of the Karelia craton along the 4B profile form a series of the tectonic slices descending eastward, some of which can be traced to the Moho. The Palaeoproterozoic structures presented by two main types: (1) volcano-sedimentary (VS) and (2) granulite-gneiss (GN) belts. The Pechenga-Varzuga VS belt has been identified as overthrust-underthrust southward-dipping package. Tectonic slices formed by the Palaeoproterozoic VS belts alternating with slices of the Neoarchaean granite-gneisses form the imbricated crustal unit that extends along the eastern margin of the Neoarchaean Karelia craton. The slices dip steeply northeastward flattening and partially juxtaposing at 20 km depth at the 1-EU cross-section. This level, which can be understood as the surface of main detachment, ascends westward. An imbrication and related thickening of the crust was caused by displacement of crustal slices in western and southwestern directions because of the Palaeoproterozoic collision event. The Palaeoproterozoic Onega unit comprising VS assemblages originated in a setting of the rifted passive margin forms the northwestward displaced thrust nappe complex. It is considered initially belonging to the southern edge of the Svecofennian passive margin. The Lapland GN belt has been transected by the Polar and EGGI profiles. Both cross-sections demonstrated that it constitutes thick composite crustal-scale tectonic slice. According to geophysical data, the continuation of the Lapland GN belt beneath the platform cover of the East European Craton forms an extended arch

  4. Satellite observations of the spatial extent and structure of Pc 3, 4, 5 pulsations near the magnetospheric equator

    Science.gov (United States)

    Singer, H. J.; Russell, C. T.; Kivelson, M. G.; Fritz, T. A.; Lennartsson, W.

    1979-01-01

    Simultaneous observations of Pc 3, 4, 5 pulsations by five satellites in the pre-noon local time sector at and near synchronous orbit are examined. The periods of these simultaneous pulsations are not the same at the different observation points. This difference is attributed to site dependent resonant conditions. The spatial properties of the temporal phenomenon are demonstrated with observations by ISEE-1 and -2 as they pass through oscillations in a spatially limited region. Fundamental and second harmonic standing Alfven waves are observed simultaneously on the same field line. The periods are consistent with model predictions when the measured plasma composition, which by mass consists mainly of singly ionized oxygen, is taken into account.

  5. Durable Reliability of Jack-up Platforms. The impact of Fatigue, Fracture and Effect of Extreme Environmental Loads on the Structural Reliability

    NARCIS (Netherlands)

    Shabakhty, N.

    2004-01-01

    A variety of factors is governing the operational conditions of jack-up platforms. The platforms are moved to different locations, which are causing changes in water depth, environmental and seabed conditions, drilling depths, payload etc. Insight should be gained in how the different factors affect

  6. The ion experiment onboard the Interball-Aurora satellite; initial results on velocity-dispersed structures in the cleft and inside the auroral oval

    Directory of Open Access Journals (Sweden)

    J. A. Sauvaud

    Full Text Available The Toulouse ION experiment flown on the Russian Interball-Aurora mission performs simultaneous ion and electron measurements. Two mass spectrometers looking in opposing directions perpendicular to the satellite spin axis, which points toward the sun, measure ions in the mass and energy ranges 1–32 amu and ~0–14 000 eV. Two electron spectrometers also looking in opposing directions perform measurements in the energy range ~10 eV–20 000 eV. The Interball-Aurora spacecraft was launched on 29 August 1996 into a 62.8° inclination orbit with an apogee of ~3 RE. The satellite orbital period is 6 h, so that every four orbits the satellite sweeps about the same region of the auroral zone; the orbit plane drifts around the pole in ~9 months. We present a description of the ION experiment and discuss initial measurements performed in the cusp near noon, in the polar cleft at dusk, and inside the proton aurora at dawn. Ion-dispersed energy structures resulting from time-of-flight effects are observed both in the polar cleft at ~16 hours MLT and in the dawnside proton aurora close to 06 hours MLT. Magnetosheath plasma injections in the polar cleft, which appear as overlapping energy bands in particle energy-time spectrograms, are traced backwards in time using a particle trajectory model using 3D electric and magnetic field models. We found that the cleft ion source is located at distances of the order of 18 RE from the earth at about 19 MLT, i.e., on the flank of the magnetopause. These observations are in agreement with flux transfer events (FTE occurring not only on the front part of the magnetopause but also in a region extending at least to dusk. We also show that, during quiet magnetic conditions, time-of-flight ion dispersions can also be measured inside the dawn proton aurora. A method similar to that used for the cleft is applied to these auroral energy dispersion signatures. Unexpectedly, the ion source is found to be

  7. Towards a Framework of Digital Platform Disruption

    DEFF Research Database (Denmark)

    Kazan, Erol; Tan, Chee-Wee; Lim, Eric T. K.

    2014-01-01

    Digital platforms are disruptive information technology (IT) artifacts that erode conventional business logic associated with traditional market structures. This paper presents a framework for examining the disruptive potential of digital platforms whereby we postulate that the strategic interplay...... of governance regimes and platform layers is deterministic of whether disruptive derivatives are permitted to flourish. This framework has been employed in a comparative case study between centralized (i.e., PayPal) and decentralized (i.e., Coinkite) digital payment platforms to illustrate its applicability...... and yield propositions on the nature and impact of digital platform disruptions. Preliminary findings indicate that centralized digital platforms attempt to create unique configurals to obtain monopolistic power by tightly coupling platform layers, which are difficult to replicate. Conversely, decentralized...

  8. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... to support this understanding. Finally a categorisation of different approaches to platform-based product development is introduced, based on the companies from the industrial study.......The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...

  9. Crustal structure across the Three Gorges area of the Yangtze platform, central China, from seismic refraction/wide-angle reflection data

    Science.gov (United States)

    Zhang, Z.; Bai, Z.; Mooney, W.; Wang, C.; Chen, X.; Wang, E.; Teng, J.; Okaya, N.

    2009-01-01

    We present active-source seismic data recorded along a 300??km-long profile across the Three Gorges area of the western Yangtze platform, central China. From west to east, the profile crosses the Zigui basin, Huangling dome and Jianghan basin. The derived crustal P-wave velocity structure changes significantly across the Tongchenghe fault that lies at the transition from the Huangling dome to the Jianghan basin. West of the Tongchenghe fault, beneath the Zigui basin and the Huangling dome, we observe a ~ 42??km thick crust of relatively low average velocity (6.3-6.4??km/s). In contrast, east of the Tongchenghe fault, beneath the Jianghan basin, the crust is only 30??km thick and has a high average velocity (6.6-6.7??km/s). A west-east variation in crustal composition along the Tongchenghe fault is also inferred. West of the fault, P-wave velocities suggest a felsic composition with an intermediate layer at the base of the crust, whilst, east of the fault, felsic, intermediate, and mafic crustal layers are apparent. Our results suggest that the crust beneath the Jianghan basin has been thinned by rifting, accompanied by intrusion of the lower crust by mafic dikes and sills. The west-to-east division of the crust in the Three Gorges area coincides with first-order geophysical contrasts in gravity, topography, crustal and lithospheric thickness. ?? 2009 Elsevier B.V.

  10. Ionospheric plasma flow over large high-voltage space platforms. I - Ion-plasma-time scale interactions of a plate at zero angle of attack. II - The formation and structure of plasma wake

    Science.gov (United States)

    Wang, J.; Hastings, D. E.

    1992-01-01

    The paper presents the theory and particle simulation results for the ionospheric plasma flow over a large high-voltage space platform at a zero angle of attack and at a large angle of attack. Emphasis is placed on the structures in the large, high-voltage regime and the transient plasma response on the ion-plasma time scale. Special consideration is given to the transient formation of the space-charge wake and its steady-state structure.

  11. Gigabit Satellite Network for NASA's Advanced Communication Technology Satellite (ACTS)

    Science.gov (United States)

    Hoder, Douglas; Bergamo, Marcos

    1996-01-01

    The advanced communication technology satellite (ACTS) gigabit satellite network provides long-haul point-to-point and point-to-multipoint full-duplex SONET services over NASA's ACTS. at rates up to 622 Mbit/s (SONET OC-12), with signal quality comparable to that obtained with terrestrial fiber networks. Data multiplexing over the satellite is accomplished using time-division multiple access (TDMA) techniques coordinated with the switching and beam hopping facilities provided by ACTS. Transmissions through the satellite are protected with Reed-Solomon encoding. providing virtually error-free transmission under most weather conditions. Unique to the system are a TDMA frame structure and satellite synchronization mechanism that allow: (a) very efficient utilization of the satellite capacity: (b) over-the-satellite dosed-loop synchronization of the network in configurations with up to 64 ground stations: and (c) ground station initial acquisition without collisions with existing signalling or data traffic. The user interfaces are compatible with SONET standards, performing the function of conventional SONET multiplexers and. as such. can be: readily integrated with standard SONET fiber-based terrestrial networks. Management of the network is based upon the simple network management protocol (SNMP). and includes an over-the-satellite signalling network and backup terrestrial internet (IP-based) connectivity. A description of the ground stations is also included.

  12. Direct Broadcast Satellite: Radio Program

    Science.gov (United States)

    Hollansworth, James E.

    1992-01-01

    NASA is committed to providing technology development that leads to the introduction of new commercial applications for communications satellites. The Direct Broadcast Satellite-Radio (DBS-R) Program is a joint effort between The National Aeronautics and Space Administration (NASA) and The United States Information Agency/Voice of America (USIA/VOA) directed at this objective. The purpose of this program is to define the service and develop the technology for a direct-to-listener satellite sound broadcasting system. The DBS-R Program, as structured by NASA and VOA, is now a three-phase program designed to help the U.S. commercial communications satellite and receiver industry bring about this new communications service. Major efforts are being directed towards frequency planning hardware and service development, service demonstration, and experimentation with new satellite and receiver technology.

  13. Enterprise Office Platform on B/S Structure%基于B/S结构的企业办公平台

    Institute of Scientific and Technical Information of China (English)

    阴黎明

    2015-01-01

    With the development of network technology and economic globalization,more and more companies are developing their own corporate website to make online office.Because of the current corporate website features a simple structure is not clear and so on,in order to optimize the web site and improve office efficiency on Internet,we proposed to develop enterprise information management system based on . NET platform,and maked it easier to achieve unified management of corporate information. The system uses B/S three-tier architecture, using Microsoft. Net framework3.5 as the development environment, based on SQLserver2008 database and dynamic web page generation technology to build information management platform.The system use the leading Ajax,XML and C # programming language,.Because of complete browser-based interface,you can easily create and manage the company's internal Web site.%随着网络技术的发展以及经济全球化,越来越多的企业都开发自己的企业网站,实现网上办公。针对当前企业网站功能简单、结构不明确等问题,为了优化网站提高企业网上办公效率,提出在.NET平台下开发企业信息管理系统,从而更方便实现企业信息的统一管理。该系统采用B/S三层体系结构,使用Microsoft .net framework3.5作为开发环境,基于SQLserver2008数据库并采用动态网页生成技术构建网站信息管理平台。采用领先的Ajax、XML等技术和C#编程,完全基于浏览器的操作界面,可更加轻松创建与管理企业的内部网站。

  14. 新型皮卫星星载接收机设计%A New Receiver Structure of TT&C Transponder for Pico-Satellite

    Institute of Scientific and Technical Information of China (English)

    周阳; 王春晖; 金小军; 金仲和

    2011-01-01

    The traditional receiver requires large volume, complex structure design and high power consumption. These characteristics don't fit the requirement of the Pico-satellite's application. Meanwhile, a low-power receiver structure has already been proposed by our team. But this low-power receiver has low sensitivity and thus can't be used widely. To resolve these problems, a new receiver structure is Proposed. This new structure mixes digital frequency synthesizer with traditional PLL. The lock-time, noise behavior and sensitivity of this new structure are analyzed and tested. The result shows that the simulation and the experiment are perfectly matched, and the performance meets the requirement well. This new structure can not only preserve the excellence of traditional receiver, but also can make the loop design much easier with less volume and lower power consumption, which are all critical to Pico-satellite.%传统星载接收机体积大、结构复杂、功耗高,无法满足皮卫星的应用要求;而项目组已研制成功的星载接收机虽然克服了这一缺点,但灵敏度不高,这就严重限制了它的使用范围.在分析两者结构特点的基础上提出了一种基于数字式频率合成器和模拟锁相环混合结构的新型皮卫星星载接收机结构,并对该结构的锁定时间、噪声和灵敏度进行了分析、仿真实验和样机实测,实验证明仿真结果与实际相互吻合,实验结果满足要求.新型结构与传统星载接收机相比大大减小了体积,降低了功耗,简化了结构,而性能与传统星载接收机相当,可以较好的满足皮卫星的应用要求.

  15. Analysis of the Structural Lineaments in the Domo de Lages, State of Santa Catarina, Using Satellite Images and Shaded Relief Maps

    Directory of Open Access Journals (Sweden)

    Luis Fernando Roldan

    2010-07-01

    Full Text Available This work focuses on the study of structural lineaments in the Domo de Lages region, central-south area of SantaCatarina State, and their relationship with the different stratigraphic units of the Paraná Basin that are present in this area.The lineaments were interpreted from Landsat and shaded relief images, using geoprocessing techniques. The results showstructural lineaments with NW, NNE, NE, ENE and E-W trends. The larger lineaments (4 - 50 km were interpreted usingshaded relief maps, whereas the smaller lineaments were interpreted using satellite images (1 - 3 km. According to fielddata, these lineaments affect the volcanic rocks of Serra Geral Formation (Paraná Basin and alkaline rocks associatedwith the dome. In all these structural trends, evidences of transcurrent faults were found. The formation of transcurrentfaults with NNE trend has been related to compressive NE-SW stress. Late Cretaceous/Paleogene is the maximum ageconsidered for the development of these structural trends associated with transcurrent faults. The formation of this structuralpattern has been linked to the reactivation of older structures present in the basin and its basement.

  16. Study of the structure changes caused by earthquakes in Chile applying the lineament analysis to the Aster (Terra) satellite data.

    Science.gov (United States)

    Arellano-Baeza, A.; Zverev, A.; Malinnikov, V.

    Chile is one of the most seismically and volcanically active regions in the South America due to a constant subdiction of the South American plate, converging with the Nazca plate in the extreme North of Chile. Four events, namely: the Ovalle earthquake of Juny 18, 2003, M=6.3, with epicenter localized at (-30:49:33, -71:18:53), the Calama earthquake of Junly 19, 2001, M=5.2, (-30:29:38,-68:33:18), the Pica earthquake of April 10, 2003, M=5.1, (-21:03:20,-68:47:10) and the La Ligua earthquake of May 6, 2001, M=5.1, (-32:35:31,-71:07:58:) were analysed using the 15 m resolution satellite images, provided by the ASTER/VNIR instrument. The Lineament Extraction and Stripes Statistic Analysis (LESSA) software package was used to examine changes in the lineament features caused by sismic activity. Lack of vegetation facilitates the study of the changes in the topography common to all events and makes it possible to evaluate the sismic risk in this region for the future.

  17. Use of high resolution satellite images for tracking of changes in the lineament structure, caused by earthquakes

    CERN Document Server

    Arellano-Baeza, A A; Trejo-Soto, M

    2007-01-01

    Over the last decades strong efforts have been made to apply new spaceborn technologies to the study and possible forecast of strong earthquakes. In this study we use ASTER/TERRA multispectral satellite images for detection and analysis of changes in the system of lineaments previous to a strong earthquake. A lineament is a straight or a somewhat curved feature in an image, which it is possible to detect by a special processing of images based on directional filtering and or Hough transform. "The Lineament Extraction and Stripes Statistic Analysis" (LESSA) software package, developed by Zlatopolsy (1992, 1997). We assume that the lineaments allow to detect, at least partially, the presence ruptures in the Earths crust, and therefore enable one to follow the changes in the system of faults and fractures associated with strong earthquakes. We analysed 6 earthquakes occurred in the Pacific coast of the South America and XXX with the Richter scale magnitude >4.5. They were located in the regions with small season...

  18. Diagnosis of an intense atmospheric river impacting the pacific northwest: Storm summary and offshore vertical structure observed with COSMIC satellite retrievals

    Science.gov (United States)

    Neiman, P.J.; Ralph, F.M.; Wick, G.A.; Kuo, Y.-H.; Wee, T.-K.; Ma, Z.; Taylor, G.H.; Dettinger, M.D.

    2008-01-01

    This study uses the new satellite-based Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) mission to retrieve tropospheric profiles of temperature and moisture over the data-sparse eastern Pacific Ocean. The COSMIC retrievals, which employ a global positioning system radio occultation technique combined with "first-guess" information from numerical weather prediction model analyses, are evaluated through the diagnosis of an intense atmospheric river (AR; i.e., a narrow plume of strong water vapor flux) that devastated the Pacific Northwest with flooding rains in early November 2006. A detailed analysis of this AR is presented first using conventional datasets and highlights the fact that ARs are critical contributors to West Coast extreme precipitation and flooding events. Then, the COSMIC evaluation is provided. Offshore composite COSMIC soundings north of, within, and south of this AR exhibited vertical structures that are meteorologically consistent with satellite imagery and global reanalysis fields of this case and with earlier composite dropsonde results from other landfalling ARs. Also, a curtain of 12 offshore COSMIC soundings through the AR yielded cross-sectional thermodynamic and moisture structures that were similarly consistent, including details comparable to earlier aircraft-based dropsonde analyses. The results show that the new COSMIC retrievals, which are global (currently yielding ???2000 soundings per day), provide high-resolution vertical-profile information beyond that found in the numerical model first-guess fields and can help monitor key lower-tropospheric mesoscale phenomena in data-sparse regions. Hence, COSMIC will likely support a wide array of applications, from physical process studies to data assimilation, numerical weather prediction, and climate research. ?? 2008 American Meteorological Society.

  19. CONFIGURATION DEVELOPMENT ON THE PLATFORM 1C FOR ENTERPRISE AUTOMATION

    OpenAIRE

    О.L. LIAKHOV; T.A. DMYTRENKO; A.О. TVERDOKHLIB; T.M. DERKACH; A.O. DMYTRENKO

    2015-01-01

    In this paper, the results of configuration development on the platform 1C for limited liability companies were presented. The object of study is the development process configuration platform 1C. The purpose of the study is the technological platform “1C: Enterprise”. The tasks included analyzing the technological platform “1C: Enterprise”, comparing the most popular ERP-systems, configurator devel-opment on the platform 1C. Such research methods as structured programming techniques and meth...

  20. Product Platform Modeling

    DEFF Research Database (Denmark)

    Pedersen, Rasmus

    on the notion that reuse and encapsulation of platform elements are fundamental characteristics of a product platform. Reuse covers the desire to reuse and share certain assets across a family of products and/or across generations of products. Product design solutions and principles are often regarded...... as important assets in a product platform, yet activities, working patterns, processes and knowledge can also be reused in a platform approach. Encapsulation is seen as a process in which the different elements of a platform are grouped into well defined and self-contained units which are decoupled from each......This PhD thesis has the title Product Platform Modelling. The thesis is about product platforms and visual product platform modelling. Product platforms have gained an increasing attention in industry and academia in the past decade. The reasons are many, yet the increasing globalisation...

  1. Impact of Ionization DEPLETIONS/TEC Bite-Outs of Equatorial Plasma Structures on Transionospheric Satellite Signals Using Global Positioning System (GPS)

    Science.gov (United States)

    Das, Tanmay

    2016-07-01

    This paper represents the impact of ionization depletions/TEC bite-outs of equatorial plasma structures on transionospheric satellite signals received from Calcutta (latitude: 22.58oN, longitude: 88.38oE geographic; 32oN magnetic dip) is situated near the northern crest of the equatorial ionization anomaly (EIA) in the Indian longitude sector, using Global Positioning System (GPS) during the equinoctial months of February-April 2011, August-October, 2011 and February-April 2012. It is observed that when a bubble moves across a satellite link, scintillations and ionization are usually encountered. The apparent duration of the bite-outs may be different from the true east-west duration, as observed with geostationary links, because of the presence of a relative velocity between the irregularity cloud and the satellite. The trajectory of a GPS satellite plays a vital role in observing the bubble characteristics. The distributions of amplitude and the parameters characterizing the ionization depletions, namely, the duration, depth and the leading and trailing edge slopes of the bubbles have been obtained during the same equinoctial months of 2011 and 2012. It is evident that the range error, extent of the bubble and ionization gradients measured in these equinoctial months of the equatorial region provides the worst case figures for system designers. The high range error (~ 3-4 m) is observed during these equinoctial months. The statistical distribution of the TEC depletions showed some significant results. Out of 29 bite-outs in February-April, 2011 equinox, the maximum amplitude was found to be about 23.25 TECU with a median depletion of about 5.92 TECU. The maximum amplitude corresponds to a range error of about 3.7 m at GPS L1 frequency. The majority of the bubbles were found to have observed duration between 10-20 minutes with a maximum of 28.14 minutes. The median value of actual duration 2.37 minutes translates to nearly 150sec of possible satellite signal

  2. Analysis of offshore jacket platform

    Digital Repository Service at National Institute of Oceanography (India)

    Harish, N.; Mandal, S.; Shanthala, B.; Rao, S.

    -Rohman, M., ‘Multi-loop feedback control of offshore steel jacket platforms’, Computers & Structures 70, 1999, 185–202. 11.Yamamoto, I., Terada, Y., and Yokokura, K., ‘An application of a position keeping control system to floating offshore platform...

  3. Existence of undiscovered Uranian satellites

    Energy Technology Data Exchange (ETDEWEB)

    Boice, D.C.

    1986-04-01

    Structure in the Uranian ring system as observed in recent occultations may contain indirect evidence for the existence of undiscovered satellites. Using the Alfven and Arrhenius (1975, 1976) scenario for the formation of planetary systems, the orbital radii of up to nine hypothetical satellites interior to Miranda are computed. These calculations should provide interesting comparisons when the results from the Voyager 2 encounter with Uranus are made public. 15 refs., 1 fig., 1 tab.

  4. MCloud platform - common government informational infrastructure

    Directory of Open Access Journals (Sweden)

    Eugenia CEBOTARU

    2017-03-01

    Full Text Available MCloud platform is foreseen for the exclusive use by the central administrative authorities and organizational structures within their jurisdiction, subordinated to the Government and is an innovative delivery model based on infrastructure consumption, platform and software as services

  5. A practice scaffolding interactive platform

    DEFF Research Database (Denmark)

    Bundsgaard, Jeppe

    2009-01-01

    , structures the students' activity, and interactively supports subject learning. A PracSIP facilitates students' development of complex competencies, and at the same time it supports the students' development of skills defined in the curriculum. The paper introduces the concept, presents the theoretical......A Practice Scaffolding Interactive Platform (PracSIP) is a social learning platform which supports students in collaborative project based learning by simulating a professional practice. A PracSIP puts the core tools of the simulated practice at the students' disposal, it organizes collaboration...

  6. ITS Platform North Denmark

    DEFF Research Database (Denmark)

    Lahrmann, Harry; Agerholm, Niels; Juhl, Jens

    2012-01-01

    This paper presents the project entitled “ITS Platform North Denmark” which is used as a test platform for Intelligent Transportation System (ITS) solutions. The platform consists of a newly developed GNSS/GPRS On Board Unit (OBU) to be installed in 500 cars, a backend server and a specially...... designed digital road map for ITS applications. The platform is freely accessible, which means that third party applications could be run on the platform. It is estimated that using this platform enables the ITS applications to be developed for 20% of the normal cost, hence third party are invited to test...... their applications in this platform. This paper presents the platform’s potentials and explains a series of test applications which are under development on it. Moreover, a number of new projects planned for the platform are demonstrated....

  7. Mobile platform security

    CERN Document Server

    Asokan, N; Dmitrienko, Alexandra

    2013-01-01

    Recently, mobile security has garnered considerable interest in both the research community and industry due to the popularity of smartphones. The current smartphone platforms are open systems that allow application development, also for malicious parties. To protect the mobile device, its user, and other mobile ecosystem stakeholders such as network operators, application execution is controlled by a platform security architecture. This book explores how such mobile platform security architectures work. We present a generic model for mobile platform security architectures: the model illustrat

  8. Climate for evidence informed health system policymaking in Cameroon and Uganda before and after the introduction of knowledge translation platforms: a structured review of governmental policy documents.

    Science.gov (United States)

    Ongolo-Zogo, Pierre; Lavis, John N; Tomson, Goran; Sewankambo, Nelson K

    2015-01-01

    There is a scarcity of empirical data on African country climates for evidence-informed health system policymaking (EIHSP) to backup the longstanding reputation that research evidence is not valued enough by health policymakers as an information input.Herein, we assess whether and how changes have occurred in the climate for EIHSP before and after the establishment of two Knowledge Translation Platforms housed in government institutions in Cameroon and Uganda since 2006. We merged content analysis techniques and policy sciences analytical frameworks to guide this structured review of governmental policy documents geared at achieving health Millennium Development Goals. We combined i) a quantitative exploration of the usage statistics of research-related words and constructs, citations of types of evidence, and budgets allocated to research-related activities; and (ii) an interpretive exploration using a deductive thematic analysis approach to uncover changes in the institutions, interests, ideas, and external factors displaying the country climate for EIHSP. Descriptive statistics compared quantitative data across countries during the periods 2001-2006 and 2007-2012. We reviewed 54 documents, including 33 grants approved by global health initiatives. The usage statistics of research-related words and constructs showed an increase over time across countries. Varied forms of data, information, or research were instrumentally used to describe the burden and determinants of poverty and health conditions. The use of evidence syntheses to frame poverty and health problems, select strategies, or forecast the expected outcomes has remained sparse over time and across countries. The budgets for research increased over time from 28.496 to 95.467 million Euros (335%) in Cameroon and 38.064 to 58.884 million US dollars (155%) in Uganda, with most resources allocated to health sector performance monitoring and evaluation. The consistent naming of elements pertaining to the

  9. Oil and Gas Producing Platforms in the Gulf of Mexico, Geographic NAD83, MMS (1998)[platforms_MMS_1998

    Data.gov (United States)

    Louisiana Geographic Information Center — This is a point data set for the location of over 4300 MMS administered platform structures used for oil and gas production in the Gulf of Mexico. Groups of platform...

  10. Reliability assessment of offshore platforms exposed to wave-in-deck loading. Appendix F: Reliability analysis of offshore jacket structures with wave load on deck using the model correction factor method

    Energy Technology Data Exchange (ETDEWEB)

    Dalsgaard Soerensen, J. [Aalborg Univ., Aalborg (Denmark); Friis-Hansen, P. [Technical Univ. Denmark, Lyngby (Denmark); Bloch, A.; Svejgaard Nielsen, J. [Ramboell, Esbjerg (Denmark)

    2004-08-01

    Different simple stochastic models for failure related to pushover collapse are investigated. Next, a method is proposed to estimate the reliability of real offshore jacket structures. The method is based on the Model Correction Factor Method and can be used to very efficiently to estimate the reliability for total failure/collapse of jacket type platforms with wave in deck loads. A realistic example is evaluated and it is seen that it is possible to perform probabilistic reliability analysis for collapse of a jacket type platform using the model correction factor method. The total number of deterministic, complicated, non-linear (RONJA) analysis is typically as low as 10. Such reliability analyses are recommended to be used in practical applications, especially for cases with wave in deck load, where the traditional RSR analyses give poor measures of the structural reliability. (au)

  11. Construction techniques for high-level large cantilever formwork platform of concrete structures%高位大悬挑混凝土结构支模平台施工技术

    Institute of Scientific and Technical Information of China (English)

    马岷成

    2013-01-01

    With the example of a high-rise public building,the author introduces a construction technique for high-level large cantilever formwork platform of concrete structures.This technique adopts basic structural unit made up of section steel to stand steel platform and to solve the problem that it is lack of safety stock to stand scaffolding with steel cantilever beam.%以某高层公共建筑工程为例,介绍了一种高位大悬挑混凝土结构支模平台施工技术,该技术采用型钢基本结构单元搭设钢平台,解决了型钢悬挑梁平台安全储备不足的问题。

  12. The Western States Water Mission: A Hyper-Resolution Hydrological Modeling and Data Integration Platform

    Science.gov (United States)

    Famiglietti, James; Basilio, Ralph; Trangsrud, Amy; Andreadis, Kostas; Cricthon, Dan; David, Cedric; Farr, Thomas; Malhotra, Shan; Neff, Kirstin; Reager, John

    2016-04-01

    Hydrological remote sensing has advanced significantly over the last decade, and will continue to grow with number of recent and near-future launched. Arguably, a platform for synthesizing remote observations is an important step towards improved modeling, understanding and prediction of terrestrial hydrology. In this presentation we describe the new NASA Western States Water Mission, a high-resolution, catchment-based modeling and data assimilation platform implemented for the western United States. Model structure will be described, as well as early results that include assimilation of satellite snow observations. A key feature of model development has been its treatment as a 'flight project' which enables leveraging of important NASA systems engineering and project management expertise.

  13. Cerveza platforms offer economic options

    Energy Technology Data Exchange (ETDEWEB)

    Leblanc, L.A.

    1982-08-01

    Two single-piece platforms, Cerveze and Cerveza Ligera, were installed by Union Oil Co. in 925-935 ft of water. The technology and equipment used for the two platforms can be used for units to a depth of 1,400 ft in mild climates and to 1,000 ft in more critical weather areas such as the North Sea. The significant improvements in design and procedures in the construction and installation of the Cerveza Ligera platform are: (1) four leg structure, as opposed to eight, requiring less steel; (2) simplified fabrication; and (3) quicker installation. The most significant area of improvement in the Ligera project compared with Cerveza was in communications. Communications between naval architects and onshore launch foremen during loadout, and between surveyors and tug captains during positioning, are cited as examples.

  14. Technical and programmatic constraints in dynamic verification of satellite mechanical systems

    Science.gov (United States)

    Stavrinidis, C.; Klein, M.; Brunner, O.; Newerla, A.

    1996-01-01

    The development and verification of satellite systems covers various programmatic options. In the mechanical systems area, spacecraft test verification options include static, shaker vibration, modal survey, thermoelastic, acoustic, impact and other environmental tests. Development and verification tests influence the provision of satellite hardware, e.g. the structural model, engineering model, flight model, postflight etc., which need to be adopted by projects. In particular, adequate understanding of the satellite dynamic characteristics is essential for flight acceptance by launcher authorities. In general, a satellite shaker vibration test is requested by launcher authorities for expendable launchers. For the latter the launcher/satellite interface is well defined at the launcher clampband/separation device, and the interface is considered conveniently as a single point at the centre of the clampband. Recently the need has been identified to refine the interface idealization in launcher/satellite coupled loads dynamic analysis, particularly in cases where concentrated satellite loads are introduced at the interface, e.g. platform support struts. In the case of shuttle payloads, which are attached directly to the shuttle, shaker vibration at a single interface is not meaningful. Shuttle launcher authorities require identification of the satellite dynamic characteristics, e.g. by modal survey, and structural verification can be demonstrated by analysis, testing or a combination of analysis and testing. In the case of large satellite systems, which cannot be tested due to the limitation of the vibration shaker test facilities, a similar approach can be adapted for expendable launchers. In such an approach the dynamic characteristics of the satellite system will be identified by the modal survey test, and detailed satellite verification/qualification will be accomplished by analysis supported by subsystem and component level tests. Mechanical strength verification

  15. Structural Changes and Convective Processes in Tropical Cyclones as Seen in Infrared and Water Vapor Satellite Data

    Science.gov (United States)

    2013-05-10

    structural changes, respectively, in tropical cyclones ( Willoughby et al. 1982). Figure 1. A vertical cross-section of a typical tropical cyclone...of typhoons. J. Meteor., 5, 247-265. Shapiro, L. J., and H. E. Willoughby , 1982: The response of balanced hurricanes to local sources of heat and...Statistical Methods in the Atmospheric Sciences. Elsevier Inc, 648 pp. Willoughby , H. E., J. A. Clos, and M. G. Shoreibah, 1982: Concentric eyewalls

  16. Kinetic simulations of electric field structure within magnetic island during magnetic reconnection and their applications to the satellite observations

    Science.gov (United States)

    Huang, S. Y.; Zhou, M.; Yuan, Z. G.; Deng, X. H.; Sahraoui, F.; Pang, Y.; Fu, S.

    2014-09-01

    Magnetic islands are considered to play a crucial role in collisionless magnetic reconnection. We use particle-in-cell simulations to investigate electric field Ez structure in the magnetic islands (including primary and secondary islands) with and without a guide field during magnetic reconnection. It is found that the electric field has multilayers in the primary island and a large bipolar structure in the secondary island in the absence of guide field. The electric field is provided by the Hall term (J × B)z (mainly), the divergence of electron pressure tensor, and the convective term (Vi × B)z in the outer and the inner region of primary island, while the electric field is much smaller (~0) in the middle and the core region of primary island due to the cancelation of the three terms. The single bipolar electric field is primarily provided by the Hall term in the secondary island. In the presence of a guide field, the electric field has multiple layers in the primary island (similar to zero guide field case) and the secondary island. However, there still exists one single large sharp bipolar structure of electric field in the central region of the secondary island. The differences of electric field in the primary and secondary islands are essentially due to the variations of the current Jy. These features can be used as the observational criteria to identify different types of magnetic islands in the magnetosphere using the data of future mission, such as the Magnetospheric Multiscale mission.

  17. Stream Gauges and Satellite Measurements

    Science.gov (United States)

    Alsdorf, D. E.

    2010-12-01

    Satellite measurements should not be viewed as a replacement for stream gauges. However, occasionally it is suggested that because satellite-based measurements can provide river discharge, a motivation for satellite approaches is an increasing lack of stream gauges. This is an argument for more stream gauges, but not necessarily for satellite measurements. Rather, in-situ and spaceborne methods of estimating discharge are complementary. Stream gauges provide frequent measurements at one point in the river reach whereas satellites have the potential to measure throughout all reaches but at orbital repeat intervals of days to weeks. The Surface Water and Ocean Topography satellite mission (SWOT) is an opportunity to further develop these complements. The motivation for SWOT, and indeed for any satellite based method of estimating discharge, should not be as a replacement for stream gauges. Scientific and application uses should motivate the measurements. For example, understanding floods with their dynamic water surfaces are best sampled from remote platforms that provide water surface elevations throughout the floodwave. As another example, today’s water and energy balance models are giving outputs at increasing spatial resolution and are making use of water surface elevations throughout the modeled basin. These models require a similar resolution in the calibrating and validating observations. We should also be aware of practical limitations. In addition to providing spatially distributed hydrodynamic measurements on rivers, SWOT will be able to measure storage changes in the estimated 30 million lakes in the world that are larger than a hectare. Knowing the storage changes in these lakes is especially important in certain regions such as the Arctic but gauging even a small fraction of these is impractical. Another motivator for satellite methods is that even in the presence of stream gauges, discharge data is not always well shared throughout all countries

  18. Practice of SPOC network teaching platform in Engineering Structure curriculum teaching%SPOC网络教学平台在工程结构课程教学中的应用

    Institute of Scientific and Technical Information of China (English)

    高磊; 段金辉; 江克斌; 何晓晖

    2016-01-01

    SPOC网络教学平台是一种新型的教学平台,融合了传统课堂教学和网络在线教学的优势,便于利用其开展线上线下混合式教学。在工程结构课程教学实践中,从资源建设、教学实施到教学评价覆盖教学全过程都采用了此平台,有力提高了教学效率和学生自主学习能力,并取得了较好的教学效果。%SPOC ( small private online course) network teaching platform is a new kind of teaching platform which combines the advantage of face⁃face communication in traditional class with the advantage of on⁃line communication in online education platform.It can be used for blending⁃teaching mode which combines on⁃line with out⁃line teaching.Teaching resource construc⁃tion, teaching process and teaching evaluating which covers with the whole process of teaching take use of the spoc platform in practice of engineering structure.The ability of teaching efficiency and students′self⁃learning abilities are improved.

  19. Continuous Platform Development

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil

    low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream......, but continuous product family evolution challenges this strategy. The concept of continuous platform development is based on the fact that platform development should not be a one-time experience but rather an ongoing process of developing new platforms and updating existing ones, so that product family...

  20. Geostationary Satellite (GOES) Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Visible and Infrared satellite imagery taken from radiometer instruments on SMS (ATS) and GOES satellites in geostationary orbit. These satellites produced...

  1. DC and Structured Electric Fields Observed on the C/NOFS Satellite and Their Association with Longitude, Plasma Density, and Solar Activity

    Science.gov (United States)

    Pfaff, Robert; Freudenreich, H.; Rowland, D.; Klenzing, J.

    2012-01-01

    Observations of DC electric fields and associated E x B plasma drifts gathered by the Vector Electric Field Investigation (VEFI) on the Air Force Communication/Navigation Outage Forecasting System (C/NOFS) satellite are presented. We show statistical averages of the vector fields and resulting E x B plasma flows for the first three years of operations as a function of season, longitude, local time, and Fl 0.7 conditions. Magnetic field data from the VEFI science magnetometer are used to compute the plasma flows. Although typically displaying eastward and outward-directed fields during the day and westward and downward-directed fields at night, the data from DC electric field detector often reveal variations from this pattern that depend on longitude, solar activity, and plasma density. Clear "wave-4" tidal effects in both electric field components have been detected and will be presented. Zonal plasma drifts show a marked variation with solar activity and may be used as a proxy for neutral winds at night. Evidence for pre-reversal enhancements in the meridional drifts that depend on solar activity is present for some longitudes, and are corroborated by clear evidence in the plasma density data that the spacecraft journeyed below the F-peak during evenings when the rise in the ionosphere is most pronounced. In addition to DC electric fields, the data reveal considerable electric field structures at large scales (approx 100's of km) that are usually confined to the nightside. Although such electric field structures are typically associated with plasma density depletions and structures, what is surprising is the number of cases in which large amplitude, structured DC electric fields are observed without a significant plasma density counterpart structure, including their appearance at times when the ambient plasma density appears relatively quiescent. We investigate the mapping of structured electric fields along magnetic field lines from distant locations and consider

  2. Non-axisymmetric structure in the satellite dwarf galaxy NGC 2976: Implications for its dark/bright mass distribution and evolution

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, Octavio; Hernandez-Toledo, Hector; Cano, Mariana; Pichardo, Bárbara [Instituto de Astronomía, Universidad Nacional Autonóma de Mexico, A.P. 70-264, 04510 México, D.F. (Mexico); Puerari, Ivanio [Instituto Nacional de Astrofísica Optica y Electrónica, Calle Luis Enrique Erro 1, 72840 Sta. Maria Tonantzintla, Puebla (Mexico); Buta, Ronald [Department of Physics and Astronomy, University of Alabama, Tuscaloosa, AL 35487 (United States); Groess, Robert, E-mail: octavio@astro.unam.mx [School of Computational and Applied Mathematics, University of Witwatersrand, Private Bag 3, WITS 2050 (South Africa)

    2014-02-01

    We present the result of an extensive search for non-axisymmetric structures in the dwarf satellite galaxy of M81, NGC 2976, using multiwavelength archival observations. The galaxy is known to present kinematic evidence for a bisymmetric distortion; however, the stellar bar presence is controversial. This controversy motivated the possible interpretation of NGC 2976 as presenting an elliptical disk triggered by a prolate dark matter halo. We applied diagnostics used in spiral galaxies in order to detect stellar bars or spiral arms. The m = 2 Fourier phase has a jump around 60 arcsec, consistent with a central bar and bisymmetric arms. The CO, 3.6 μm surface brightness, and the dust lanes are consistent with a gas-rich central bar and possibly with gaseous spiral arms. The bar-like feature is offset close to 20° from the disk position angle, in agreement with kinematic estimations. The kinematic jumps related to the dust lanes suggest that the bar perturbation in the disk kinematics is non-negligible and the reported non-circular motions, the central gas excess, and the nuclear X-ray source (active galactic nucleus/starburst) might be produced by the central bar. Smoothed particle hydrodynamics simulations of disks inside triaxial dark halos suggest that the two symmetric spots at 130 arcsec and the narrow arms may be produced by gas at turning points in an elliptical disk, or, alternatively, the potential ellipticity can be produced by a tidally induced strong stellar bar/arms; in both cases the rotation curve interpretation is, importantly, biased. The M81 group is a natural candidate to trigger the bisymmetric distortion and the related evolution as suggested by the H I tidal bridge detected by Chynoweth et al. We conclude that both mechanisms, the gas-rich bar and spiral arms triggered by the environment (tidal stirring) and primordial halo triaxiality, can explain most of the NGC 2976 non-circular motions, mass redistribution, and nuclear activity

  3. Stereoscopic observations from meteorological satellites

    Science.gov (United States)

    Hasler, A. F.; Mack, R.; Negri, A.

    The capability of making stereoscopic observations of clouds from meteorological satellites is a new basic analysis tool with a broad spectrum of applications. Stereoscopic observations from satellites were first made using the early vidicon tube weather satellites (e.g., Ondrejka and Conover [1]). However, the only high quality meteorological stereoscopy from low orbit has been done from Apollo and Skylab, (e.g., Shenk et al. [2] and Black [3], [4]). Stereoscopy from geosynchronous satellites was proposed by Shenk [5] and Bristor and Pichel [6] in 1974 which allowed Minzner et al. [7] to demonstrate the first quantitative cloud height analysis. In 1978 Bryson [8] and desJardins [9] independently developed digital processing techniques to remap stereo images which made possible precision height measurement and spectacular display of stereograms (Hasler et al. [10], and Hasler [11]). In 1980 the Japanese Geosynchronous Satellite (GMS) and the U.S. GOES-West satellite were synchronized to obtain stereo over the central Pacific as described by Fujita and Dodge [12] and in this paper. Recently the authors have remapped images from a Low Earth Orbiter (LEO) to the coordinate system of a Geosynchronous Earth Orbiter (GEO) and obtained stereoscopic cloud height measurements which promise to have quality comparable to previous all GEO stereo. It has also been determined that the north-south imaging scan rate of some GEOs can be slowed or reversed. Therefore the feasibility of obtaining stereoscopic observations world wide from combinations of operational GEO and LEO satellites has been demonstrated. Stereoscopy from satellites has many advantages over infrared techniques for the observation of cloud structure because it depends only on basic geometric relationships. Digital remapping of GEO and LEO satellite images is imperative for precision stereo height measurement and high quality displays because of the curvature of the earth and the large angular separation of the

  4. Cross-Platform Technologies

    Directory of Open Access Journals (Sweden)

    Maria Cristina ENACHE

    2017-04-01

    Full Text Available Cross-platform - a concept becoming increasingly used in recent years especially in the development of mobile apps, but this consistently over time and in the development of conventional desktop applications. The notion of cross-platform software (multi-platform or platform-independent refers to a software application that can run on more than one operating system or computing architecture. Thus, a cross-platform application can operate independent of software or hardware platform on which it is execute. As a generic definition presents a wide range of meanings for purposes of this paper we individualize this definition as follows: we will reduce the horizon of meaning and we use functionally following definition: a cross-platform application is a software application that can run on more than one operating system (desktop or mobile identical or in a similar way.

  5. Neptune's small satellites

    Science.gov (United States)

    Thomas, P.

    1992-04-01

    The small satellites of Neptune and other planets discovered during the Voyager 2 mission are discussed in terms of their composition and relationship to the planetary systems. The satellite Proteus is described in terms of its orbit, five other satellites are described, and they are compared to ther small satellites and systems. Neptune's satellites are hypothesized to be related to the ring system, and the satellite Galatea is related to the confinement of the rings.

  6. Future large broadband switched satellite communications networks

    Science.gov (United States)

    Staelin, D. H.; Harvey, R. R.

    1979-01-01

    Critical technical, market, and policy issues relevant to future large broadband switched satellite networks are summarized. Our market projections for the period 1980 to 2000 are compared. Clusters of switched satellites, in lieu of large platforms, etc., are shown to have significant advantages. Analysis of an optimum terrestrial network architecture suggests the proper densities of ground stations and that link reliabilities 99.99% may entail less than a 10% cost premium for diversity protection at 20/30 GHz. These analyses suggest that system costs increase as the 0.6 power of traffic. Cost estimates for nominal 20/30 GHz satellite and ground facilities suggest optimum system configurations might employ satellites with 285 beams, multiple TDMA bands each carrying 256 Mbps, and 16 ft ground station antennas. A nominal development program is outlined.

  7. Low-cost space platforms for detection and tracking technologies

    Science.gov (United States)

    Cullen, Robert M.

    1991-08-01

    This paper describes the capabilities and applications of inexpensive satellite platforms capable of carrying dedicated sensor packages into low earth orbit on primary or shared launch services. These satellites permit achievement of rapid operational status by employing standard buses with fixed options for orbit and power. The satellites may be configured for experimental or operational missions with lifetimes up to several years. Low cost satellites can satisfy a range of mission requirements in the areas of surveillance, drug interdiction, environmental and geophysical observations, immigration control, fisheries law enforcement, remote sensing, real-time communications, store-and-forward communications, and technology testing. These satellites may be equipped for location determination missions with ID and homing transponders and tagged objects or persons. The satellites' size, power, and weight budgets are appropriately rated for the types of dedicated mission scenarios noted above. For applications requiring continuous visibility or high availability, constellations of satellites may be both appropriate and cost-effective. Orbital parameters are determined by the launch vehicle and the requirements of the primary payload. Geographical service areas are determined by the orbital footprint, the parameters of which are determined by the mission requirements and the selection of launch vehicle. The satellites' small size permits their launch on any of several launch vehicles in domestic or international inventory. Integral to each satellite is a communications and control package which, when coupled with companion low cost earth terminals, provides programmable mission scenarios under operator control. These satellites permit rapid implementation of operational systems within tight fiscal constraints.

  8. Use of stereoscopic satellite imagery for 3D mapping of bedrock structure in West Antarctica: An example from the northern Ford Ranges

    Science.gov (United States)

    Contreras, A.; Siddoway, C. S.; Porter, C.; Gottfried, M.

    2012-12-01

    In coastal West Antarctica, crustal-scale faults have been minimally mapped using traditional ground-based methods but regional scale structures are inferred mainly on the basis of low resolution potential fields data from airborne geophysical surveys (15 km flightline spacing). We use a new approach to detailed mapping of faults, shear zones, and intrusive relationships using panchromatic and multispectral imagery draped upon a digital elevation model (DEM). Our work focuses on the Fosdick Mountains, a culmination of lower middle crustal rocks exhumed at c. 100 Ma by dextral oblique detachment faulting. Ground truth exists for extensive areas visited during field studies in 2005-2011, providing a basis for spectral analysis of 8-band WorldView-02 imagery for detailed mapping of complex granite- migmatite relationships on the north side of the Fosdick range. A primary aim is the creation of a 3D geological map using the results of spectral analysis merged with a DEM computed from a stereographic pair of high resolution panchromatic images (sequential scenes, acquired 45 seconds apart). DEMs were computed using ERDAS Imagine™ LPS eATE, refined by MATLAB-based interpolation scripts to remove artifacts in the terrain model according to procedures developed by the Polar Geospatial Center (U. Minnesota). Orthorectified satellite imagery that covers the area of the DEMs was subjected to principal component analysis in ESRI ArcGIS™ 10.1, then the different rock types were identified using various combinations of spectral bands in order to map the geology of rock exposures that could not be accessed directly from the ground. Renderings in 3D of the satellite scenes draped upon the DEMs were created using Global Mapper™. The 3D perspective views reveal structural and geological features that are not observed in either the DEM nor the satellite imagery alone. The detailed map is crucial for an ongoing petrological / geochemical investigation of Cretaceous crustal

  9. The design and synthesis of a hydrophilic core-shell-shell structured magnetic metal-organic framework as a novel immobilized metal ion affinity platform for phosphoproteome research.

    Science.gov (United States)

    Zhao, Man; Deng, Chunhui; Zhang, Xiangmin

    2014-06-14

    In this work, polydopamine (PDA)-coated magnetic microspheres with surface modification of zirconium-based MOFs were synthesized for the first time. The as-synthesized Fe3O4@PDA@Zr-MOF composites were successfully applied as a novel immobilized metal ion affinity platform for phosphoproteome research.

  10. Binary Satellite Galaxies

    CERN Document Server

    Evslin, Jarah

    2013-01-01

    Suggestions have appeared in the literature that the following five pairs of Milky Way and Andromeda satellite galaxies are gravitationally bound: Draco and Ursa Minor, Leo IV and V, Andromeda I and III, NGC 147 and 185, and the Magellanic clouds. Under the assumption that a given pair is gravitationally bound, the Virial theorem provides an estimate of its total mass and so its instantaneous tidal radius. For all of these pairs except for the Magellanic clouds the resulting total mass is 2 to 4 orders of magnitude higher than that within the half light radius. Furthermore in the case of each pair except for Leo IV and Leo V, the estimated tidal radius is inferior to the separation between the two satellites. Therefore all or almost all of these systems are not gravitationally bound. We note several possible explanations for the proximities and similar radial velocities of the satellites in each pair, for example they may have condensed from the same infalling structure or they may be bound by a nongravitatio...

  11. Unveiling the Magnetic Structure of VHE SNRs/PWNe with XIPE, the X-ray Imaging-Polarimetry Satellite

    CERN Document Server

    Wilhelmi, E de Ona; Bykov, A; Zanin, R; Bucciantini, N; Amato, E; Bandiera, R; Olmi, B; Uvarov, Yu

    2016-01-01

    The dynamics, energetics and evolution of pulsar wind nebulae (PWNe) and supernova remnants (SNRs), are strongly affected by their magnetic field strength and distribution. They are usually strong, extended, sources of non-thermal X-ray radiation, producing intrinsically polarised radiation. The energetic wind around pulsars produces a highly-magnetised, structured flow, often displaying a jet and a torus and different features (i.e. wisps, knots). This magnetic-dominant wind evolves as it moves away from the pulsar magnetosphere to the surrounding large-scale nebula, becoming kinetic-dominant. Basic aspects such how this conversion is produced, or how the jets and torus are formed, as well as the level of turbulence in the nebula are still unknown. Likewise, the processes ruling the acceleration of particles in shell-like SNRs up to 1015 eV, including the amplification of the magnetic field, are not clear yet. Imaging polarimetry in this regard is crucial to localise the regions of shock acceleration and to ...

  12. Characterising Vegetation Structural and Functional Differences Across Australian Ecosystems From a Network of Terrestrial Laser Scanning Survey Sites and Airborne and Satellite Image Archives

    Science.gov (United States)

    Phinn, S. R.; Armston, J.; Scarth, P.; Johansen, K.; Schaefer, M.; Suarez, L.; Soto-Berelov, M.; Muir, J.; Woodgate, W.; Jones, S.; Held, A. A.

    2015-12-01

    vertical and horizontal distribution of plant materials. TLS data are providing a step change in satellite image based vegetation mapping, and refining our knowledge of vegetation structure and its phenological variability. Open access plot scale TLS measurements are available through the TERN Auscover data portal.

  13. Throttleable GOX/ABS launch assist hybrid rocket motor for small scale air launch platform

    Science.gov (United States)

    Spurrier, Zachary S.

    Aircraft-based space-launch platforms allow operational flexibility and offer the potential for significant propellant savings for small-to-medium orbital payloads. The NASA Armstrong Flight Research Center's Towed Glider Air-Launch System (TGALS) is a small-scale flight research project investigating the feasibility for a remotely-piloted, towed, glider system to act as a versatile air launch platform for nano-scale satellites. Removing the crew from the launch vehicle means that the system does not have to be human rated, and offers a potential for considerable cost savings. Utah State University is developing a small throttled launch-assist system for the TGALS platform. This "stage zero" design allows the TGALS platform to achieve the required flight path angle for the launch point, a condition that the TGALS cannot achieve without external propulsion. Throttling is required in order to achieve and sustain the proper launch attitude without structurally overloading the airframe. The hybrid rocket system employs gaseous-oxygen and acrylonitrile butadiene styrene (ABS) as propellants. This thesis summarizes the development and testing campaign, and presents results from the clean-sheet design through ground-based static fire testing. Development of the closed-loop throttle control system is presented.

  14. Platform switching and bone platform switching.

    Science.gov (United States)

    Carinci, Francesco; Brunelli, Giorgio; Danza, Matteo

    2009-01-01

    Bone platform switching involves an inward bone ring in the coronal part of the implant that is in continuity with the alveolar bone crest. Bone platform switching is obtained by using a dental fixture with a reverse conical neck. A retrospective study was performed to evaluate the effectiveness of conventional vs reverse conical neck implants. In the period between May 2004 and November 2007, 86 patients (55 females and 31 males; median age, 53 years) were operated and 234 implants were inserted: 40 and 194 were conventional vs reverse conical neck implants, respectively. Kaplan-Meier algorithm and Cox regression were used to detect those variables associated with the clinical outcome. No differences in survival and success rates were detected between conventional vs reverse conical neck implants alone or in combination with any of the studied variables. Although bone platform switching leads to several advantages, no statistical difference in alveolar crest resorption is detected in comparison with reverse conical neck implants. We suppose that the proximity of the implant abutment junction to the alveolar crestal bone gives no protection against the microflora contained in the micrograph. Additional studies on larger series and a combination of platform switching and bone platform switching could lead to improved clinical outcomes.

  15. Platform development supportedby gaming

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan; Hansen, Poul H. Kyvsgård

    2007-01-01

    The challenge of implementing industrial platforms in practice can be described as a configuration problem caused by high number of variables, which often have contradictory influences on the total performance of the firm. Consequently, the specific platform decisions become extremely complex......, possibly increasing the strategic risks for the firm. This paper reports preliminary findings on platform management process at LEGO, a Danish toy company.  Specifically, we report the process of applying games combined with simulations and workshops in the platform development. We also propose a framework......, based on the portfolio management thinking, to measure the degree of modularity embedded in a given platform and to what extent it is aligned with other platforms....

  16. 公共制造云服务平台架构及其支撑技术研究%Research of structure and key technologies for public manufacturing cloud service platform

    Institute of Scientific and Technical Information of China (English)

    张倩; 齐德昱

    2013-01-01

    To make small and medium enterprises(SME) fully enjoy the benefits brought by the cloud manufacturing,this paper analyzed the operating principle of public manufacturing cloud,and proposed the structure of public manufacturing cloud service platform for the SME,as well as its formal description.It discussed several key technologies such as cloud manufacturing resource management,collaborative design,and QoS management.Based on the multi-level hierarchical control structure,it constructed a cloud manufacturing resource management and monitoring model.It also built a service-oriented virtual collaborative design environment based on the infrastructure of the platform,which could support the design of complex product.The operation model of the platform shows that the proposed platform is applicable and exemplary.%为了能使量大面广的中小企业充分享受云制造的益处,分析了公共制造云的运行原理,搭建了一个面向中小企业的公共制造云服务平台架构,并给出了其形式化描述.对平台所涉及的关键支撑技术如云制造资源管理、协同设计及QoS管理进行分析,提出了基于多级递阶控制结构的云制造资源管理与监控模型,以及在云制造基础设施之上构建了支持复杂产品设计、面向服务的虚拟协同设计环境.最后通过公共制造云服务平台运作模型说明了平台的应用性和示范性.

  17. Product Platform Replacements

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2012-01-01

    Purpose – It is argued in this article that too little is known about product platforms and how to deal with them from a manager's point of view. Specifically, little information exists regarding when old established platforms are replaced by new generations in R&D and production environments...... originality and value is achieved by focusing on product platform replacements believed to represent a growing management challenge....

  18. The Creative Platform

    DEFF Research Database (Denmark)

    Byrge, Christian; Hansen, Søren

    This book is about introducing more creativity into general educational courses and cross-disciplinary activities. It is directed toward teachers at all levels in the educational system, but the Creative Platform is a general model, and thus the creative process will fundamentally be the same...... whether you consider thirdgrade teaching, human-resource development, or radical new thinking in product development in a company. The Creative Platform was developed at Aalborg University through a series of research-and-development activities in collaboration with educational institutions and private...... you can use in your work with the Creative Platform. This book is intended as an introduction on how to use the Creative Platform....

  19. Omnidirectional holonomic platforms

    Energy Technology Data Exchange (ETDEWEB)

    Pin, F.G.; Killough, S.M.

    1994-06-01

    This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independently controlled rotational and translational motion capabilities. The authors first present the orthogonal-wheels concept and the two major wheel assemblies on which these platforms are based. They then describe how a combination of these assemblies with appropriate control can be used to generate an omnidirectional capability for mobile robot platforms. The design and control of two prototype platforms are then presented and their respective characteristics with respect to rotational and translational motion control are discussed.

  20. Key Technology on Deep-Water Semi-Submersible Drilling Platform:Global Performance;Structure Analysis;Vortex-Induced Vibration

    Institute of Scientific and Technical Information of China (English)

    2015-01-01

    谢彬杨建民主编上海交通大学出版社出版定价:$150.00内容简介:This book is based on the project Research on the Key Technology of3 000m Deepwater Semi-Submersible Drilling Platform aiming at solving the key issues of design and construction techniques.It contains 5parts,

  1. NASA ACTS Multibeam Antenna (MBA) System. [Advanced Communications Technology Satellite

    Science.gov (United States)

    Choung, Youn H.; Stiles, W. Herschel; Wu, Joseph; Wong, William C.; Chen, C. Harry

    1986-01-01

    The design of the Advanced Communications Technology Satellite MBA system, which provides both spot beam and scanning beam coverage to both high and low burst rates data-users is examined. The MBA consists of receive and transmit antennas installed on a common precision mounting platform that is integrated to the bus through three flexures; a lightweight system with low thermal distortion is obtained by using composite materials for the MBA structures. The RF design, which is a Cassegrain reflector with a large equivalent focal length/aperture size, is described. Consideration is given to the position of the feed in order to minimize scan loss and sidelobe levels, the size of the subreflector in order to minimize feed spillover, and antenna performance degradation caused by reflector surface distortion. Breadbroad model test result reveal that the maximum sidelobe level outside the 2.5 HPBW region is -30 dB or lower relative to the power.

  2. Peer-to-Peer Service Sharing Platforms

    DEFF Research Database (Denmark)

    Andersson, Magnus; Hjalmarsson, Anders; Avital, Michel

    2013-01-01

    The sharing economy has been growing continuously in the last decade thanks to the proliferation of internet-based platforms that allow people to disintermediate the traditional commercial channels and to share excess resources and trade with one another effectively at a reasonably low transaction...... cost. Whereas early peer-to-peer platforms were designed to enable file sharing and goods trading, we recently witness the emergence of a new breed of peer-to-peer platforms that are designed for ordinary service sharing. Ordinary services entail intangible provisions and are defined as an economic...... activity that generates immaterial benefits and does not result in ownership of material goods. Based on a structured analysis of 41 internet-based rideshare platforms, we explore and layout the unique characteristics of peer-to-peer service sharing platforms based on three distinct temporal patterns...

  3. 光电平台伺服系统稳定环结构谐振自抗扰控制%An Active Disturbance Rejection Controller of the Stable Loop Structure Resonance of an Opto-electronic Platform Servo System

    Institute of Scientific and Technical Information of China (English)

    周涛

    2013-01-01

    The structure resonance perhaps causes the unstable system, which limits the tracking precision and the dynamic response speed of an airborne opto-electronic platform servo system. According to the zero-pole assignment principle, an active disturbance rejection controller is designed with a nominal control input. The active disturbance rejection controller is used to compensate the stable loop structure resonance of the opto-electronic platform servo system. Simulation experiment results demonstrate that the controller could inhibit the structure resonance influence on the servo system and increase the stable loop velocity tracking precision of the opto-electronic platform. Moreover, it is robust to the parameters’ changes of the structure resonance model.%  结构谐振可能造成系统不稳定,限制机载光电平台伺服系统的跟踪精度和动态响应速度。根据零极点配置原理,采用名义控制量进行自抗扰控制器的设计,利用该自抗扰控制器补偿光电平台伺服系统稳定环的结构谐振。仿真实验结果表明它较好地抑制了结构谐振对伺服系统的影响,提高了光电平台稳定环的速度跟踪精度,并且对结构谐振传递函数中参数较大范围的变化具有鲁棒性。

  4. Satellite data compression

    CERN Document Server

    Huang, Bormin

    2011-01-01

    Satellite Data Compression covers recent progress in compression techniques for multispectral, hyperspectral and ultra spectral data. A survey of recent advances in the fields of satellite communications, remote sensing and geographical information systems is included. Satellite Data Compression, contributed by leaders in this field, is the first book available on satellite data compression. It covers onboard compression methodology and hardware developments in several space agencies. Case studies are presented on recent advances in satellite data compression techniques via various prediction-

  5. Trends in communications satellites

    CERN Document Server

    Curtin, Denis J

    1979-01-01

    Trends in Communications Satellites offers a comprehensive look at trends and advances in satellite communications, including experimental ones such as NASA satellites and those jointly developed by France and Germany. The economic aspects of communications satellites are also examined. This book consists of 16 chapters and begins with a discussion on the fundamentals of electrical communications and their application to space communications, including spacecraft, earth stations, and orbit and wavelength utilization. The next section demonstrates how successful commercial satellite communicati

  6. 数控微位移实验平台的结构设计和系统控制%Structural Design and System Control for NC Micro Displacement Experiment Platform

    Institute of Scientific and Technical Information of China (English)

    赵娜; 王士军; 赵勇; 刘敦宁

    2013-01-01

    The design of the mechanical structure for numerical control micro displacement experiment platform was introduced.The micro-stepmotor servo-system was used to drive experimental platform and high precision ball screw pair was adopted as drive equipment.In addition,a high precision cross roller guide rail pair that plays a role of supporting and guiding was designed.The transmission accuracy and stability of the experimental platform were improved.In micro displacement experimental platform,open numerical control system was used in which the theory of basic pulse interpolation was utilized to fit the rotation trajectory of experimental platform.At the same time,the subdivision drive technology was used to reduce vibration and noise of stepper motor.So the stability of the system is improved.The comprehensive automation control and accurate positioning of the micro displacement experiment platform is realized.%介绍数控微位移实验平台机械结构设计,采用微型步进电机伺服系统驱动实验平台,选用精度较高的滚珠丝杠螺母副作为驱动装置,设计一种精度较高的交叉滚柱导轨副作为支承和导向部件,提高了实验平台的传动精度和稳定性.微位移实验平台采用开放式数控系统,该系统利用基准脉冲插补原理拟合实验平台平转动轨迹.同时,采用细分驱动技术,减少了步进电机的振动、噪声等问题,提高了系统的稳定性,实现了微位移实验平台全面自动化控制和精确定位.

  7. An introduction to optimal satellite range scheduling

    CERN Document Server

    Vázquez Álvarez, Antonio José

    2015-01-01

    The satellite range scheduling (SRS) problem, an important operations research problem in the aerospace industry consisting of allocating tasks among satellites and Earth-bound objects, is examined in this book. SRS principles and solutions are applicable to many areas, including: Satellite communications, where tasks are communication intervals between sets of satellites and ground stations Earth observation, where tasks are observations of spots on the Earth by satellites Sensor scheduling, where tasks are observations of satellites by sensors on the Earth. This self-contained monograph begins with a structured compendium of the problem and moves on to explain the optimal approach to the solution, which includes aspects from graph theory, set theory, game theory and belief networks. This book is accessible to students, professionals and researchers in a variety of fields, including: operations research, optimization, scheduling theory, dynamic programming and game theory. Taking account of the distributed, ...

  8. Satellite Attitude Control System Simulator

    Directory of Open Access Journals (Sweden)

    G.T. Conti

    2008-01-01

    Full Text Available Future space missions will involve satellites with great autonomy and stringent pointing precision, requiring of the Attitude Control Systems (ACS with better performance than before, which is function of the control algorithms implemented on board computers. The difficulties for developing experimental ACS test is to obtain zero gravity and torque free conditions similar to the SCA operate in space. However, prototypes for control algorithms experimental verification are fundamental for space mission success. This paper presents the parameters estimation such as inertia matrix and position of mass centre of a Satellite Attitude Control System Simulator (SACSS, using algorithms based on least square regression and least square recursive methods. Simulations have shown that both methods have estimated the system parameters with small error. However, the least square recursive methods have performance more adequate for the SACSS objectives. The SACSS platform model will be used to do experimental verification of fundamental aspects of the satellite attitude dynamics and design of different attitude control algorithm.

  9. EURESCOM Services Platform

    NARCIS (Netherlands)

    Nieuwenhuis, Lambertus Johannes Maria; van Halteren, Aart

    1999-01-01

    This paper presents the results of the EURESCOM Project 715. In February 1999, a large team of researchers from six European public network operators completed a two year period of cooperative experiments on a TINA-based environment, called the EURESCOM Services Platform (ESP). This platform

  10. Satellite and Surface Data Synergy for Developing a 3D Cloud Structure and Properties Characterization Over the ARM SGP. Stage 1: Cloud Amounts, Optical Depths, and Cloud Heights Reconciliation

    Science.gov (United States)

    Genkova, I.; Long, C. N.; Heck, P. W.; Minnis, P.

    2003-01-01

    One of the primary Atmospheric Radiation Measurement (ARM) Program objectives is to obtain measurements applicable to the development of models for better understanding of radiative processes in the atmosphere. We address this goal by building a three-dimensional (3D) characterization of the cloud structure and properties over the ARM Southern Great Plains (SGP). We take the approach of juxtaposing the cloud properties as retrieved from independent satellite and ground-based retrievals, and looking at the statistics of the cloud field properties. Once these retrievals are well understood, they will be used to populate the 3D characterization database. As a first step we determine the relationship between surface fractional sky cover and satellite viewing angle dependent cloud fraction (CF). We elaborate on the agreement intercomparing optical depth (OD) datasets from satellite and ground using available retrieval algorithms with relation to the CF, cloud height, multi-layer cloud presence, and solar zenith angle (SZA). For the SGP Central Facility, where output from the active remote sensing cloud layer (ARSCL) valueadded product (VAP) is available, we study the uncertainty of satellite estimated cloud heights and evaluate the impact of this uncertainty for radiative studies.

  11. Combining structure-from-motion derived point clouds from satellites and unmanned aircraft systems images with ground-truth data to create high-resolution digital elevation models

    Science.gov (United States)

    Palaseanu, M.; Thatcher, C.; Danielson, J.; Gesch, D. B.; Poppenga, S.; Kottermair, M.; Jalandoni, A.; Carlson, E.

    2016-12-01

    Coastal topographic and bathymetric (topobathymetric) data with high spatial resolution (1-meter or better) and high vertical accuracy are needed to assess the vulnerability of Pacific Islands to climate change impacts, including sea level rise. According to the Intergovernmental Panel on Climate Change reports, low-lying atolls in the Pacific Ocean are extremely vulnerable to king tide events, storm surge, tsunamis, and sea-level rise. The lack of coastal topobathymetric data has been identified as a critical data gap for climate vulnerability and adaptation efforts in the Republic of the Marshall Islands (RMI). For Majuro Atoll, home to the largest city of RMI, the only elevation dataset currently available is the Shuttle Radar Topography Mission data which has a 30-meter spatial resolution and 16-meter vertical accuracy (expressed as linear error at 90%). To generate high-resolution digital elevation models (DEMs) in the RMI, elevation information and photographic imagery have been collected from field surveys using GNSS/total station and unmanned aerial vehicles for Structure-from-Motion (SfM) point cloud generation. Digital Globe WorldView II imagery was processed to create SfM point clouds to fill in gaps in the point cloud derived from the higher resolution UAS photos. The combined point cloud data is filtered and classified to bare-earth and georeferenced using the GNSS data acquired on roads and along survey transects perpendicular to the coast. A total station was used to collect elevation data under tree canopies where heavy vegetation cover blocked the view of GNSS satellites. A subset of the GPS / total station data was set aside for error assessment of the resulting DEM.

  12. Satellite discrimination of snow/cloud surfaces

    Science.gov (United States)

    Crane, R. G.; Anderson, M. R.

    1984-01-01

    Differentiation between cloud cover and snow surfaces using remotely sensed data is complicated by the similarity of their radiative temperatures, and also by their similar reflectances at visible wavelengths. A method of cloud analysis over snow-covered regions is presented, using 1.51-1.63 micron data from an experimental sensor on board a U.S. Air Force Defense Meteorological Satellite Program platform. At these wavelengths, snow appears relatively 'black' while clouds are highly reflective. The spatial structure of the 1.51-1.63 micron reflectivity fields over a continuous snow surface are examined. Plots of mean reflectance against coefficients of variation for 4 x 4 pixel areas reveals a cluster of points have low reflectivity and low variability, corresponding to snow-covered (cloud free) areas, and a similar cluster with high reflectances corresponding to 100 per cent cloud cover. For the case of a single layered cloud, the radiances associated with partially filled fields of view are also inferred.

  13. Overall structure and functional design on sport E-government platform%体育电子政务平台的总体结构与功能设计

    Institute of Scientific and Technical Information of China (English)

    贾文伟

    2014-01-01

    体育电子政务能够加快全民健身公共信息服务网络建设,提高全民健身公共信息服务能力。总体结构与功能设计是开发电子政务平台的基础性工作,本文对此展开研究。总体结构是体育电子政务平台所包含的业务功能模块和规模程度,以总体结构研究为基础,分别研究了体育信息发布系统、体育横向应用系统、办公自动化系统、体育管理信息系统、系统维护管理系统等功能。运用本文设计的功能开发的体育电子政务平台,具有功能强大、适用性强等特点。%Sport e-government can accelerate network construction of national fitness public information service and improve the capacity of national fitness public information service.The paper studies the basic work for developing e-government platform that is the overall structure and functional design.The overall structure is the business function module and scale extent that are included in the sport e-government platform.The paper studies sport information release system,sport transverse application system,office automation system,sport management information system,system maintenance management system and other functions based on overall structure design.Sport e-government platform used features designed in this paper has the characteristics of powerful,applicability and so on.

  14. Software for validating parameters retrieved from satellite

    Digital Repository Service at National Institute of Oceanography (India)

    Muraleedharan, P.M.; Sathe, P.V.; Pankajakshan, T.

    surface layer (skin temperature) whereas the conventional sea truth platforms (MB) measure temperature represented by the upper 2-3 m layer (Wick et al., 1992). During the day, the air temperature instantly modifies the skin temperature of the sea... between satellite measured skin and multi-channel SST. J. Geophys. Res., 97: 5569-5595. Now the weighted average of SST is obtained from the following relation ...

  15. Unmanned aerial vehicle: A unique platform for low-altitude remote sensing for crop management

    Science.gov (United States)

    Unmanned aerial vehicles (UAV) provide a unique platform for remote sensing to monitor crop fields that complements remote sensing from satellite, aircraft and ground-based platforms. The UAV-based remote sensing is versatile at ultra-low altitude to be able to provide an ultra-high-resolution imag...

  16. Structural steels for fixed offshore platforms: technical challenges at the Brazilian national supply chain; Acos estruturais para plataformas fixas offshore: desafios tecnicos junto a cadeia de suprimentos nacional brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Fabio Modesti Orsini de [Promon Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

    2012-07-01

    This paper presents the main technical requirements for structural steel applied to the construction of bottom fixed offshore platforms, based on the most widely adopted and recognized actual standards. The mechanical properties and lab tests necessary to fulfill the Risk Management and E and P companies requirements are presented aiming to build the theoretical bases necessary for the engineering design of projects of this kind. The main types of steel available in the national market are presented at the end, giving an overall look at the Brazilian steel supply chain. (author)

  17. Three-dimensional Teaching Resource Platform Construction and Practice of Concrete Structure Serial Courses%混凝土结构系列课程立体化教学资源平台的建设与实践

    Institute of Scientific and Technical Information of China (English)

    刘建平; 郭树荣; 史萍

    2015-01-01

    根据混凝土结构系列课程的教学目标和网络教学需要,构建了混凝土结构系列课程立体化网络教学平台。该平台主要由网络课程、工程信息库、结构设计竞赛、创新研究、课程拓展、考研路上、注册考试相关、师生互动等8个模块组成。为学生营造了自主性、探究性、个性化的学习环境,提高了教学质量和学生的素质。%According to teaching target of concrete structure serial courses and needs of network teaching. This paper has constructed concrete structure serial courses network teaching platform. Which is mainly composed of 8 parts, namely online courses, engineering information database, structure design competition, innovation and research, curriculum development, postgraduate road, registration examination related to teacher-student interation? This platform has created autonomy, inquiry, personalized learning environment for students, the teaching efifciency improved1.

  18. Model refinement for offshore platforms: Experimental study

    Science.gov (United States)

    Zhang, Min; Chen, Zongli; Wu, Yanjian

    2017-08-01

    Offshore jacket platforms are widely used in offshore oil and gas exploitation. Finite element models of such structures need to have many degrees of freedom (DOFs) to represent the geometrical detail of complex structures, thereby leading to incompatibility in the number of DOFs of experimental models. To bring them both to the same order while ensuring that the essential eigen- properties of the refined model match those of experimental models, an extended model refinement procedure is presented in this paper. Vibration testing of an offshore jacket platform model is performed to validate the applicability of the proposed approach. A full-order finite element model of the platform is established and then tuned to meet the measured modal properties identified from the acceleration signals. Both model reduction and modal expansion methods are investigated, as well as various scenarios of sensor arrangements. Upon completion of the refinement, the updated jacket platform model matches the natural frequencies of the measured model well.

  19. Satellite Meteorology Education & Training Resources from COMET

    Science.gov (United States)

    Abshire, W. E.; Dills, P. N.; Weingroff, M.; Lee, T. F.

    2012-12-01

    The COMET® Program (www.comet.ucar.edu) receives funding from NOAA NESDIS as well as EUMETSAT and the Meteorological Service of Canada to support education and training in satellite meteorology. These partnerships enable COMET to create educational materials of global interest on geostationary and polar-orbiting remote sensing platforms. These materials focus on the capabilities and applications of current and next-generation satellites and their relevance to operational forecasters and other user communities. By partnering with experts from the Naval Research Laboratory, NOAA-NESDIS and its Cooperative Institutes, Meteorological Service of Canada, EUMETSAT, and other user communities, COMET stimulates greater use of satellite data observations and products. This presentation provides an overview of COMET's recent satellite education efforts in the area of polar orbiting satellites. COMET has a new module on Suomi NPP, which describes the satellite system and discusses the improvements that it is bringing to forecasting, numerical weather prediction, and environmental monitoring. COMET has also published an updated version of its module on the VIIRS instrument. "Imaging with VIIRS: A Convergence of Technologies and Experience, 2nd Edition" covers the instrument's enhanced capabilities by examining the systems that contributed to its development. Special attention is paid to the Day/Night Visible channel as VIIRS is the first instrument on a civilian satellite to image atmospheric and terrestrial features with and without moonlight. An upcoming module will exclusively focus on nighttime imaging with the VIIRS Day/Night Band (DNB). "Applications of the VIIRS Day-Night Band" will introduce the capabilities of DNB imagery to a wide audience ranging from forecasters and emergency managers to wildfire fighters and oceanographers. DNB products will be compared to traditional satellite products made from infrared data, including the "fog" product. Users will learn how DNB

  20. Accuracy analysis of continuous deformation monitoring using BeiDou Navigation Satellite System at middle and high latitudes in China

    Science.gov (United States)

    Jiang, Weiping; Xi, Ruijie; Chen, Hua; Xiao, Yugang

    2017-02-01

    As BeiDou Navigation Satellite System (BDS) has been operational in the whole Asia-Pacific region, it means a new GNSS system with a different satellite orbit structure will become available for deformation monitoring in the future. Conversely, GNSS deformation monitoring data are always processed with a regular interval to form displacement time series for deformation analysis, where the interval can neither be too long from the time perspective nor too short from the precision of determined displacements angle. In this paper, two experimental platforms were designed, with one being at mid-latitude and another at higher latitude in China. BDS data processing software was also developed for investigating the accuracy of continuous deformation monitoring using current in-orbit BDS satellites. Data over 20 days at both platforms were obtained and were processed every 2, 4 and 6 h to generate 3 displacement time series for comparison. The results show that with the current in-orbit BDS satellites, in the mid-latitude area it is easy to achieve accuracy of 1 mm in horizontal component and 2-3 mm in vertical component; the accuracy could be further improved to approximately 1 mm in both horizontal and vertical directions when combined BDS/GPS measurements are employed. At higher latitude, however, the results are not as good as expected due to poor satellite geometry, even the 6 h solutions could only achieve accuracy of 4-6 and 6-10 mm in horizontal and vertical components, respectively, which implies that it may not be applicable to very high-precision deformation monitoring at high latitude using the current BDS. With the integration of BDS and GPS observations, however, in 4-h session, the accuracy can achieve 2 mm in horizontal component and 4 mm in vertical component, which would be an optimal choice for high-accuracy structural deformation monitoring at high latitude.

  1. Xichang Satellite Launch Center

    Institute of Scientific and Technical Information of China (English)

    LiuJie

    2004-01-01

    Xichang Satellite Launch Center(XSLC) is mainly for geosynchronous orbit launches. The main purpose of XSLC is to launch spacecraft, such as broadcasting,communications and meteorological satellites, into geo-stationary orbit.Most of the commercial satellite launches of Long March vehicles have been from Xichang Satellite Launch Center. With 20 years' development,XSLC can launch 5 kinds of launch vehicles and send satellites into geostationary orbit and polar orbit. In the future, moon exploration satellites will also be launched from XSLC.

  2. Handbook of satellite applications

    CERN Document Server

    Madry, Scott; Camacho-Lara, Sergio

    2017-01-01

    The first edition of this ground breaking reference work was the most comprehensive reference source available about the key aspects of the satellite applications field. This updated second edition covers the technology, the markets, applications and regulations related to satellite telecommunications, broadcasting and networking—including civilian and military systems; precise satellite navigation and timing networks (i.e. GPS and others); remote sensing and meteorological satellite systems. Created under the auspices of the International Space University based in France, this brand new edition is now expanded to cover new innovative small satellite constellations, new commercial launching systems, innovation in military application satellites and their acquisition, updated appendices, a useful glossary and more.

  3. 基于IaaS的医院云平台构建研究%Research of Hospital Cloud Platform Structure Based on IaaS

    Institute of Scientific and Technical Information of China (English)

    刘宝妹; 钟俊华; 陈金雄

    2013-01-01

      云计算以其高资源利用率和扩展性架构满足了医院对软硬件资源弹性分配、高效管理、安全可靠和低成本等需求。立足于医院信息建设现状,探讨了基于IaaS的医院云平台构建模式,并给出了具体步骤、措施和建议。%The cloud computing with its high resource utilization and scalable architecture meets the hospitals demand for elastic assignment of hardware and software resources, high-efficiency management, security, reliability and low-cost construction. In view of the actuality of information construction in the hospital, this article explores the construction modes of hospitals cloud platform based on IaaS, and gives specific steps, measures and recommendations on the construction of IaaS cloud platform.

  4. A Low Power Approach to Small Satellite Propulsion

    OpenAIRE

    Cardin, Joe; Mosher, Larry

    1999-01-01

    Small Satellites are emerging as the preferred platform for a wide variety of earth orbit and even interplanetary missions. These spacecraft are, by their very nature, extremely limited in volume, mass and power. Existing fluid propulsion options are too large, costly and complex for many small satellite applications. In an attempt to address this problem the Applied Physics Laboratory of Johns Hopkins University, as part of an advanced development contract with NASA, has contracted with V AC...

  5. Data Collection Satellite Application in Precision Agriculture

    Science.gov (United States)

    Durào, O.

    2002-01-01

    Agricultural Instrumentation Research Center, Brazilian Agricultural Research Corporation; Space Programs Brazil launched in 1993 its first satellite partially built and entirely designed, integrated, tested and operated in the country. It was the SCD-1 satellite, a small (115 kg. and an octagonal prism with 80 cm. height and an external diameter of 100 cm.) with a payload transponder that receives data from ground platforms spread all over the country (including its sea shore). These data are then retransmitted to a receiving station at every satellite pass. Data collected and received are processed at Data Collection Mission Center for distribution via internet at most 30 min after the satellite pass. The ground platforms are called PCD's and differ in the parameters measured according to its purpose and location. Thus, they are able to measure temperature, rain level, wind direction, solar radiation, carbon monoxide as well as many others, beyond its own location. SCD- 1 had a nominal designed life of one year, but is still functioning. It is a LEO satellite with inclination of 25°. In 1998, the country launched SCD-2, with the same purpose, but in phase with SCD-1 . Other differences were a higher index of Brazilian made components and an active attitude control subsystem for the spin rate provided by the magnetic torque coils (these in accordance with a development strategy previously planned). In 1999 the country launched in cooperation with China a remote sensing satellite (mass of 1.4 ton.) called CBERS-1. This satellite is sun synchronous (98° inclination) and also carries a transponder for data collection/transmission as a secondary payload. Thus, the country has now three satellites with data collection/transmission capabilities, two in low inclination phased orbits and one in polar orbit, providing a nice coverage both geographical and temporal not only to its territory but also to other regions of the world.. At first there were not too many PCD

  6. Galileo satellite antenna modeling

    Science.gov (United States)

    Steigenberger, Peter; Dach, Rolf; Prange, Lars; Montenbruck, Oliver

    2015-04-01

    The space segment of the European satellite navigation system Galileo currently consists of six satellites. Four of them belong to the first generation of In-Orbit Validation (IOV) satellites whereas the other two are Full Operational Capability (FOC) satellites. High-precision geodetic applications require detailed knowledge about the actual phase center of the satellite and receiver antenna. The deviation of this actual phase center from a well-defined reference point is described by phase center offsets (PCOs) and phase center variations (PCVs). Unfortunately, no public information is available about the Galileo satellite antenna PCOs and PCVs, neither for the IOV, nor the FOC satellites. Therefore, conventional values for the IOV satellite antenna PCOs have been adopted for the Multi-GNSS experiment (MGEX) of the International GNSS Service (IGS). The effect of the PCVs is currently neglected and no PCOs for the FOC satellites are available yet. To overcome this deficiency in GNSS observation modeling, satellite antenna PCOs and PCVs are estimated for the Galileo IOV satellites based on global GNSS tracking data of the MGEX network and additional stations of the legacy IGS network. Two completely independent solutions are computed with the Bernese and Napeos software packages. The PCO and PCV values of the individual satellites are analyzed and the availability of two different solutions allows for an accuracy assessment. The FOC satellites are built by a different manufacturer and are also equipped with another type of antenna panel compared to the IOV satellites. Signal transmission of the first FOC satellite has started in December 2014 and activation of the second satellite is expected for early 2015. Based on the available observations PCO estimates and, optionally PCVs of the FOC satellites will be presented as well. Finally, the impact of the new antenna model on the precision and accuracy of the Galileo orbit determination is analyzed.

  7. The Common HOL Platform

    OpenAIRE

    Adams, Mark

    2015-01-01

    The Common HOL project aims to facilitate porting source code and proofs between members of the HOL family of theorem provers. At the heart of the project is the Common HOL Platform, which defines a standard HOL theory and API that aims to be compatible with all HOL systems. So far, HOL Light and hol90 have been adapted for conformance, and HOL Zero was originally developed to conform. In this paper we provide motivation for a platform, give an overview of the Common HOL Platform's theory and...

  8. Ladder attachment platform

    Science.gov (United States)

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  9. Design and implementation of general integration platform based on structured P2P networks%通用的结构化P2P网络支撑平台的设计及实现

    Institute of Scientific and Technical Information of China (English)

    刘业; 刘林峰

    2013-01-01

    针对结构化P2P网络所拥有的可缩放特性,对基于结构化P2P网络技术在广域网范围内实现海量规模的资源整合和共享机制进行了研究.提出了一种通用的结构化P2P网络支撑平台,给出了结构化P2P网络支撑平台参考模型,并在该参考模型的指导下,设计出一种通用的结构化P2P网络支撑平台实现框架的模块划分图,同时介绍了通用平台的具体设计及实现,详细阐述了可提供给第三方进行新型应用开发的开放API接口函数,并给出了通用平台的相关测试结果.该文的工作对推动结构化P2P网络技术的实用化进程将提供有益的参考.%Considering that scalability is a fundamental property of structured P2P networks, the mechanism based on structured P2P networks is studied to make huge numbers of resources in the range of Internet integrate and share. A general integration platform based on structured P2P networks is proposed. Firstly, a layered reference model is given, in the guide of which an implementation framework of integration platform in constructed. Modules' functions in the frameworks are described individually. Detail design and implementation of the platform are discussed. Open API interface functions are elaborated in detail, which is provided to the third party to develop the new applications. Simulations are verified the platform's feature. These works have great reference value to the farther research.

  10. Satellite-Based Quantum Communications

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Richard J [Los Alamos National Laboratory; Nordholt, Jane E [Los Alamos National Laboratory; McCabe, Kevin P [Los Alamos National Laboratory; Newell, Raymond T [Los Alamos National Laboratory; Peterson, Charles G [Los Alamos National Laboratory

    2010-09-20

    Single-photon quantum communications (QC) offers the attractive feature of 'future proof', forward security rooted in the laws of quantum physics. Ground based quantum key distribution (QKD) experiments in optical fiber have attained transmission ranges in excess of 200km, but for larger distances we proposed a methodology for satellite-based QC. Over the past decade we have devised solutions to the technical challenges to satellite-to-ground QC, and we now have a clear concept for how space-based QC could be performed and potentially utilized within a trusted QKD network architecture. Functioning as a trusted QKD node, a QC satellite ('QC-sat') could deliver secret keys to the key stores of ground-based trusted QKD network nodes, to each of which multiple users are connected by optical fiber or free-space QC. A QC-sat could thereby extend quantum-secured connectivity to geographically disjoint domains, separated by continental or inter-continental distances. In this paper we describe our system concept that makes QC feasible with low-earth orbit (LEO) QC-sats (200-km-2,000-km altitude orbits), and the results of link modeling of expected performance. Using the architecture that we have developed, LEO satellite-to-ground QKD will be feasible with secret bit yields of several hundred 256-bit AES keys per contact. With multiple ground sites separated by {approx} 100km, mitigation of cloudiness over any single ground site would be possible, potentially allowing multiple contact opportunities each day. The essential next step is an experimental QC-sat. A number of LEO-platforms would be suitable, ranging from a dedicated, three-axis stabilized small satellite, to a secondary experiment on an imaging satellite. to the ISS. With one or more QC-sats, low-latency quantum-secured communications could then be provided to ground-based users on a global scale. Air-to-ground QC would also be possible.

  11. Satellite-Delivered Learning.

    Science.gov (United States)

    Arnall, Gail C.

    1987-01-01

    Discusses the application of satellite information delivery to training. Describes a new trend, horizontal programming. Also discusses vertical programming and in-house production of training materials. Lists vendors of satellite-based training. (CH)

  12. GPS Satellite Simulation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The GPS satellite simulation facility consists of a GPS satellite simulator controlled by either a Silicon Graphics Origin 2000 or PC depending upon unit under test...

  13. China's Recoverable Satellites

    Institute of Scientific and Technical Information of China (English)

    Tang Boehang

    2008-01-01

    @@ By the end of 2006, China had launched 24 recoverable satellites (FSW) in total. Among them, 23 were launched successfully, of which all but one were successfully recovered. Recoverable satellites launched by China are listed in Table 1.

  14. Satellite Tags- Hawaii EEZ

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Satellite tagging was implemented in 2013. Satellite tagging is conducted using a Dan Inject air rifle and deployment arrows designed by Wildlife Computers. Two...

  15. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...... indisputable. This paper presents state-of-the-art literature on platform research related to production platforms and investigates gaps in the literature. The paper concludes on findings by proposing future research directions....

  16. Application of wireless sensor network technology in offshore platform structure safety detection%无线传感器网络技术在海洋平台结构安全检测领域的应用研究

    Institute of Scientific and Technical Information of China (English)

    宋海涛; 陈祥余; 廖立斌; 唐坤; 韩齐森

    2013-01-01

      无线传感器网络能够很好地解决海洋平台结构检测中遇到的很多问题。对无线传感器网络这一无线通信中的热点领域在无线传感器网络体系构架、大规模组网技术及网络管理、环境感知技术、数据采集技术以及信息处理技术等方面进行了应用研究,以期能将该项技术应用于我国海洋平台结构的安全检测中。%The wireless sensor network has some advantages to handle the problems in offshore platform structure safety detection. Focusing on the wireless sensor network, the hot points in wireless communication are researched in the aspects of network architecture, large-scale networking technologies and network management, environment sensing, data acquisition, and information processing technologies to benefit the structure safety detection of offshore platform in China.

  17. USA Hire Testing Platform

    Data.gov (United States)

    Office of Personnel Management — The USA Hire Testing Platform delivers tests used in hiring for positions in the Federal Government. To safeguard the integrity of the hiring processes and ensure...

  18. MULTIFUNCTIONAL PLATFORMS AND

    African Journals Online (AJOL)

    Solar service centres and multifunctional platforms are innovative concepts for providing energy services in ... same time generate income. obeng ..... communities the driving force behind the ... operator(s) had to contact repairers outside their.

  19. The Common HOL Platform

    Directory of Open Access Journals (Sweden)

    Mark Adams

    2015-07-01

    Full Text Available The Common HOL project aims to facilitate porting source code and proofs between members of the HOL family of theorem provers. At the heart of the project is the Common HOL Platform, which defines a standard HOL theory and API that aims to be compatible with all HOL systems. So far, HOL Light and hol90 have been adapted for conformance, and HOL Zero was originally developed to conform. In this paper we provide motivation for a platform, give an overview of the Common HOL Platform's theory and API components, and show how to adapt legacy systems. We also report on the platform's successful application in the hand-translation of a few thousand lines of source code from HOL Light to HOL Zero.

  20. The Creative Platform

    DEFF Research Database (Denmark)

    Byrge, Christian; Hansen, Søren

    whether you consider thirdgrade teaching, human-resource development, or radical new thinking in product development in a company. The Creative Platform was developed at Aalborg University through a series of research-and-development activities in collaboration with educational institutions and private......This book is about introducing more creativity into general educational courses and cross-disciplinary activities. It is directed toward teachers at all levels in the educational system, but the Creative Platform is a general model, and thus the creative process will fundamentally be the same...... companies. It is a project in which the goal is to make a hands-on approach to a knowledge perspective on enhancing creativity. The underlying ambition of the Creative Platform is to make it easier to promote creativity. At www.uka.aau.dk/The+Creative+Platform, you can find extra materials and instructions...

  1. Satellite communication engineering

    CERN Document Server

    Kolawole, Michael Olorunfunmi

    2013-01-01

    An undeniably rich and thorough guide to satellite communication engineering, Satellite Communication Engineering, Second Edition presents the fundamentals of information communications systems in a simple and succinct way. This book considers both the engineering aspects of satellite systems as well as the practical issues in the broad field of information transmission. Implementing concepts developed on an intuitive, physical basis and utilizing a combination of applications and performance curves, this book starts off with a progressive foundation in satellite technology, and then moves on

  2. Taiyuan Satellite Launch Center

    Institute of Scientific and Technical Information of China (English)

    LiuJie

    2004-01-01

    There are three major space launch bases in China, the Jiuquan Satellite Launch Center,the Taiyuan Satellite Launch Center and the Xichang Satellite Launch Center. All the three launch centers are located in sparsely populated areas where the terrain is even and the field of vision is broad. Security, transport conditions and the influence of the axial rotation

  3. Geodetic Secor Satellite

    Science.gov (United States)

    1974-06-01

    simple, and had low-power lem. 17 14. Satellite Orientation . The satellite was designed to maintain a constant relationship between the antenna...the same satellite orientation . Further considerations were Th oscillations, however, when higher orbital ranges (500-2500 nautical miles) -, 3 a

  4. TC-2 Satellite Delivered

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    On April 18, 2005, TC-2, the second satellite of Double Star Program (DSP), which was jointly developed by CNSA and ESA, was approved to be delivered to the user after the on-board test and trial operation. The satellite is working well and the performance can meet the user's need. The satellite has collected large amount of valuable scientific data

  5. National Community Solar Platform

    Energy Technology Data Exchange (ETDEWEB)

    Rupert, Bart [Clean Energy Collective, Louisville, CO (United States)

    2016-06-30

    This project was created to provide a National Community Solar Platform (NCSP) portal known as Community Solar Hub, that is available to any entity or individual who wants to develop community solar. This has been done by providing a comprehensive portal to make CEC’s solutions, and other proven community solar solutions, externally available for everyone to access – making the process easy through proven platforms to protect subscribers, developers and utilities. The successful completion of this project provides these tools via a web platform and integration APIs, a wide spectrum of community solar projects included in the platform, multiple groups of customers (utilities, EPCs, and advocates) using the platform to develop community solar, and open access to anyone interested in community solar. CEC’s Incubator project includes web-based informational resources, integrated systems for project information and billing systems, and engagement with customers and users by community solar experts. The combined effort externalizes much of Clean Energy Collective’s industry-leading expertise, allowing third parties to develop community solar without duplicating expensive start-up efforts. The availability of this platform creates community solar projects that are cheaper to build and cheaper to participate in, furthering the goals of DOE’s SunShot Initiative. Final SF 425 Final SF 428 Final DOE F 2050.11 Final Report Narrative

  6. Mobile sensor platforms: categorisation and research applications in precision farming

    Directory of Open Access Journals (Sweden)

    C. W. Zecha

    2013-05-01

    Full Text Available The usage of mobile sensor platforms arose in research a few decades ago. Since the beginning of satellite sensing, measurement principles and analysing methods have become widely implemented for aerial and ground vehicles. Mainly in Europe, the United States and Australia, sensor platforms in precision farming are used for surveying, monitoring and scouting tasks. This review gives an overview of available sensor platforms used in recent agricultural and related research projects. A general categorisation tree for platforms is outlined in this work. Working in manual, automatic or autonomous ways, these ground platforms and unmanned aircraft systems (UAS with an agricultural scope are presented with their sensor equipment and the possible architectural models. Thanks to advances in highly powerful electronics, smaller devices mounted on platforms have become economically feasible for many applications. Designed to work automatically or autonomously, they will be able to interact in intelligent swarms. Sensor platforms can fulfil the need for developing, testing and optimising new applications in precision farming like weed control or pest management. Furthermore, commercial suppliers of platform hardware used in sensing tasks are listed.

  7. Chang'e-1 Satellite Completed Its Preset Objectives

    Institute of Scientific and Technical Information of China (English)

    He Ying

    2008-01-01

    @@ By October 23, Chang'e-1 satellite with a one-year design lifetime has been operating in lunar orbit for one year, completed more than 4000 orbits, covering the entire moon 12 times. The satellite's platform works normally at present and all systems and equipment onboard work in their main mode. The satellite has obtained a large quantity of scientific data and achieved the preset objectives of precise orbit maneuver, successful moon orbiting, effective exploration and oneyear lifetime. The Chang'e-1 mission is a complete success.

  8. Satellite measurements of the earth's crustal magnetic field

    Science.gov (United States)

    Schnetzler, C. C.

    1989-01-01

    The literature associated with the Magsat mission has evaluated the capabilities and limitations of satellite measurements of the earth's crustal magnetic field, and demonstrated that there exists a 300-3000 km magnetic field, related to major features in the earth's crust, which is primarily caused by induction. Due to its scale and sensitivity, satellite data have been useful in the development of models for such large crustal features as subduction zones, submarine platforms, continental accretion boundaries, and rifts. Attention is presently given to the lack of agreement between laboratory and satellite estimates of lower crustal magnetization.

  9. Small Earth Observing Satellites Flying with Large Satellites in the A-Train

    Science.gov (United States)

    Kelly, Angelita C.; Loverro, Adam; Case, Warren F.; Queruel, Nadege; Marechal, Chistophe; Barroso, Therese

    2009-01-01

    This paper/poster presents a real-life example of the benefits of flying small satellites with other satellites, large or small, and vice versa. Typically, most small satellites fly payloads consisting of one or two instruments and fly in orbits that are independent from that of other satellites. The science data from these satellites are either used in isolation or correlated with instrument data from other satellites. Data correlation with other satellites is greatly improved when the measurements of the same point or air mass are taken at approximately the same time. Scientists worldwide are beginning to take advantage of the opportunities for improved data correlation, or coincidental science, offered by the international Earth Observing Constellation known as the A-Train (sometimes referred to as the Afternoon Constellation). Most of the A-Train satellites are small - the A-Train is anchored by two large NASA satellites (EOS-Aqua and EOS-Aura), but consists also of 5 small satellites (CloudSat, CALIPSO, PARASOL, OCO and Glory these last two will join in 2009). By flying in a constellation, each mission benefits from coincidental observations from instruments on the other satellites in the constellation. Essentially, from a data point of view, the A-Train can be envisioned as a single, virtual science platform with multiple instruments. Satellites in the A-Train fly at 705 km in sun-synchronous orbits. Their mean local times at the equator are within seconds to a few minutes of each other. This paper describes the challenges of operating an international constellation of independent satellites from the U.S. and Europe to maximize the coincidental science opportunities while at the same time minimizing the level of operational interactions required between team members. The A-Train mission teams have been able to demonstrate that flying as members of an international constellation does not take away the flexibility to accommodate new requirements. Specific

  10. The Platformization of the Web: Making Web Data Platform Ready

    NARCIS (Netherlands)

    A. Helmond

    2015-01-01

    In this article, I inquire into Facebook’s development as a platform by situating it within the transformation of social network sites into social media platforms. I explore this shift with a historical perspective on, what I refer to as, platformization, or the rise of the platform as the dominant

  11. Astronomy from satellite clusters

    Science.gov (United States)

    Stachnik, R.; Labeyrie, A.

    1984-03-01

    Attention is called to the accumulating evidence that giant space telescopes, comprising a number of separate mirrors on independent satellites, are a realistic prospect for providing research tools of extraordinary power. The ESA-sponsored group and its counterpart in the US have reached remarkably similar conclusions regarding the basic configuration of extremely large synthetic-aperture devices. Both share the basic view that a cluster of spacecraft is preferable to a single monolithic structure. The emphasis of the US group has been on a mission that sweeps across as many sources as possible in the minimum time; it is referred to as SAMSI (Spacecraft Array for Michelson Spatial Interferometry). The European group has placed more emphasis on obtaining two-dimensional images. Their system is referred to as TRIO because, at least initially, it involves three independent systems. Detailed descriptions are given of the two systems.

  12. An Experimental Study of an Offshore Platform

    DEFF Research Database (Denmark)

    Brincker, Rune; Asmussen, John Christian; Andersen, Palle

    This report describes the results of an analysis of the ambient response data collected from a Venezuelan near-shore offshore platform constructed in 1992. Recording of the data have been constantly done during the period from May 1993 to July 1994. Using these data the structural integrity...... of the multi-pile offshore platform is investigated by using a vibration based damage detection scheme. Changes in structural integrity are assumed to be reflected in the modal parameters estimated from only output data using an Auto-Regressive Moving Average (ARMA) model. Before the calibration of the ARMA...... model the quality of the measured data have been investigated. The estimated modal parameters and their corresponding variances are used as input to a probability based damage indicator. This indicator indicates, that since the construction of the platform, minor structural changes have taken place....

  13. Platform Performance and Challenges - using Platforms in Lego Company

    DEFF Research Database (Denmark)

    Munk, Lone; Mortensen, Niels Henrik

    2009-01-01

    by the product defining users (product developers) and platform erosion. When the platforms are not used it is due to: unsuitable calculation models, lack of goals, rewards or benefits from management, unattractive tradeoffs and difficulties in understanding the platform. This indicates that platform design...... needs focus on the incentive of using the platform. This problem lacks attention in literature, as well as industry, where assessment criteria do not cover this aspect. Therefore, we recommend including user incentive in platform assessment criteria to these challenges. Concrete solution elements...... ensuring user incentive in platforms is an object for future research...

  14. Theory of geostationary satellites

    CERN Document Server

    Zee, Chong-Hung

    1989-01-01

    Geostationary or equatorial synchronous satellites are a daily reminder of our space efforts during the past two decades. The nightly television satellite weather picture, the intercontinental telecommunications of television transmissions and telephone conversations, and the establishrnent of educational programs in remote regions on Earth are constant reminders of the presence of these satellites. As used here, the term 'geo­ stationary' must be taken loosely because, in the long run, the satellites will not remain 'stationary' with respect to an Earth-fixed reference frame. This results from the fact that these satellites, as is true for all satellites, are incessantly subject to perturbations other than the central-body attraction of the Earth. Among the more predominant pertur­ bations are: the ellipticity of the Earth's equator, the Sun and Moon, and solar radiation pressure. Higher harmonics of the Earth's potential and tidal effects also influence satellite motion, but they are of second­ order whe...

  15. Satellite data assimilation in global forecast system in India

    Science.gov (United States)

    Basu, Swati

    2014-11-01

    Satellite data is very important for model initialization and verification. A large number of satellite observations are currently assimilated into the Numerical Weather Prediction (NWP) systems at the National Centre for Medium Range Weather Forecasting (NCMRWF). Apart from Global meteorological observations from GTS, near-real time satellite observations are received at NCMRWF from other operational centres like ISRO, NOAA/NESDIS, EUMETCAST, etc. Recently India has become member of Asia-Pacific Regional ATOVS Retransmission Service (APRARS) for faster access to high resolution global satellite data useful for high resolution regional models. Indian HRPT at Chennai covers the APRARS data gap region over South East Asia. A robust data monitoring system has been implemented at NCMRWF to assess the quantity and quality of the data as well as the satellite sensor strength, before getting assimilated in the models. Validation of new satellite observations, especially from Indian satellites are being carried out against insitu observations and similar space borne platforms. After establishing the quality of the data, Observation System Experiments (OSEs) are being conducted to study their impact in the assimilation and forecast systems. OSEs have been carried out with the Oceansat-2 scatterometer winds and radiance data from Megha-Tropiques SAPHIR sensor. Daily rainfall analysis dataset is being generated by merging satellite estimates and in-situ observations. ASCAT soil wetness measurements from METOP satellite is being assimilated into the global model. Land surface parameters (LuLc and albedo) retrieved from Indian satellites are being explored for its possible usage in the global and regional models. OLR from Indian satellites are used for validating model outputs. This paper reviews the efforts made at NCMRWF in (i) assimilating the data from Indian/International satellites and (ii) generating useful products from the satellite data.

  16. Multifunctional e-spun colloidal nanofiber structures from various dispersed blends of PVA/ODA-MMT with PVP/ODA-MMT, poly(VP-alt-MA and AgNPs incorporated polymer complexes as electro-active platforms

    Directory of Open Access Journals (Sweden)

    U. Bunyatova

    2016-07-01

    Full Text Available This work presented a new approach to fabricate polymer nanocomposites films with nanofiber structures from solution blends of poly(vinyl alcohol + octadecyl amine-montmorillonite (ODA-MMT (matrix with poly(N-vinylpyrrolidone + ODA-MMT (partner-1, poly(N-vinylpyrrolidone-alt-maleic anhydride ((poly(VP-alt-MA + (ODA-MMT (partner-2 and their silver (Ag-carrying polymer complexes by electrospinning. Chemical and physical structures, surface morphologies, thermal behaviors, electrical conductivity and thermal resistance parameters of nanofiber structures were investigated. Poly(VP-alt-MA was used both as a crosslinker and a donor of the hydrophilic groups such as ‒COOH and ‒NH–C=O amide from pyrrolidone ring. Reactive poly(VP-alt-MA, in situ generated Ag nanoparticles (AgNPs and original partner polymer had an significant effect on the morphology and diameter distribution of nanofibers. High and excellent conductive behaviors were observed for the homopolymer and copolymer of VP based fiber structures, respectively. Upon successive chemical cross-linking of the nanofiber structures by reactive partner copolymer, the conductivity of nanofiber films as electro-active platforms dramatically increased to 3.90·10–2 S·cm–1 at room temperature. Comparative analysis results also indicated that electrical properties strongly depended on the loaded reactive organoclay and in situ generated AgNPs.

  17. Small satellite attitude determination based on GPS/IMU data fusion

    Energy Technology Data Exchange (ETDEWEB)

    Golovan, Andrey [Navigation and Control Laboratory, M.V. Lomonosov Moscow State University, GSP-1, Leninskie Gory, Moscow (Russian Federation); Cepe, Ali [Department of Applied Mechanics and Control, M.V. Lomonosov Moscow State University, Moscow (Russian Federation)

    2014-12-10

    In this paper, we present the mathematical models and algorithms that describe the problem of attitude determination for a small satellite using measurements from three angular rate sensors (ARS) and aiding measurements from multiple GPS receivers/antennas rigidly attached to the platform of the satellite.

  18. Dutch Micro Systems Technology for the Next Generation of Small Satellites

    NARCIS (Netherlands)

    Gill, E.; Monna, G.L.E.; Scherpen, J.M.A.; Verhoeven, C.J.M.

    2007-01-01

    Advanced microelectronics and Micro Systems Technology (MST) enable an increased functional performance of small satellites with decreased demands on mass, size and power. The research and development cluster MISAT stimulates the design and development of advanced small satellite platforms based on

  19. Dutch Micro Systems Technology for the Next Generation of Small Satellites

    NARCIS (Netherlands)

    Gill, E.; Monna, G.L.E.; Scherpen, J.M.A.; Verhoeven, C.J.M.

    2007-01-01

    Advanced microelectronics and Micro Systems Technology (MST) enable an increased functional performance of small satellites with decreased demands on mass, size and power. The research and development cluster MISAT stimulates the design and development of advanced small satellite platforms based on

  20. Transactional Network Platform: Applications

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Lutes, Robert G.; Ngo, Hung; Underhill, Ronald M.

    2013-10-31

    In FY13, Pacific Northwest National Laboratory (PNNL) with funding from the Department of Energy’s (DOE’s) Building Technologies Office (BTO) designed, prototyped and tested a transactional network platform to support energy, operational and financial transactions between any networked entities (equipment, organizations, buildings, grid, etc.). Initially, in FY13, the concept demonstrated transactions between packaged rooftop air conditioners and heat pump units (RTUs) and the electric grid using applications or "agents" that reside on the platform, on the equipment, on a local building controller or in the Cloud. The transactional network project is a multi-lab effort with Oakridge National Laboratory (ORNL) and Lawrence Berkeley National Laboratory (LBNL) also contributing to the effort. PNNL coordinated the project and also was responsible for the development of the transactional network (TN) platform and three different applications associated with RTUs. This document describes two applications or "agents" in details, and also summarizes the platform. The TN platform details are described in another companion document.

  1. 海上平台超长火炬臂结构设计及风激振动分析%The structural design and wind-induced vibration analysis for ultralong flare boom on offshore platform

    Institute of Scientific and Technical Information of China (English)

    伊才颖; 宋晓秋; 王晓蕾; 尹汉军; 梅华东

    2012-01-01

    The oil and gas processing amount on platform becomes greater along with the development of offshore oil exploitation, so that it is necessary to use the bigger flare boom exceeding the normal size. The weight and member cross-section of flare boom increases when flare boom length extends, which will lead to the new design issues, such as wind-induced vibration and wind spectrum fatigue issues. Based on one 90 meters ultralong flare boom structural design of a huge offshore platform in South China Sea, the structural type was studied and optimized, and the strength and fatigue was assessed in this paper, -which can provide a reference for similar structural design in the coming days.%随着海洋油气资源开发的发展,海洋平台工艺处理量越来越大,需要设置的释放火炬臂尺度也更大,超出了常规尺度范围.火炬臂长度增加必然导致结构重量增加和杆件尺寸发生变化,进而带来新的设计问题,如风激振动、风谱疲劳等.文中以南海某大型海上平台90 m超长火炬臂结构设计为例,探讨超长火炬臂结构形式的特点并进行了合理化的结构设计,对结构强度和疲劳损伤进行了评估,可为今后类似的结构设计提供参考.

  2. Mapping plasma structures in the high-latitude ionosphere using beacon satellite, incoherent scatter radar and ground-based magnetometer observations

    Directory of Open Access Journals (Sweden)

    T. Neubert

    2002-06-01

    Full Text Available In the autumn of the year 2000, four radio receivers capable of tracking various beacon satellites were set up along the southwestern coast of Greenland. They are used to reconstruct images of the ionospheric plasma density distribution via the tomographic method. In order to test and validate tomographic imaging under the highly variable conditions often prevailing in the high-latitude ionosphere, a time interval was selected when the Sondrestrom incoherent scatter radar conducted measurements of the ionospheric plasma density while the radio receivers tracked a number of beacon satellites. A comparison between two-dimensional images of the plasma density distribution obtained from the radar and the satellite receivers revealed generally good agreement between radar measurements and tomographic images. Observed discrepancies can be attributed to F region plasma patches moving through the field of view with a speed of several hundred meters per second, thereby smearing out the tomographic image. A notable mismatch occurred around local magnetic midnight when a magnetospheric substorm breakup occurred in the vicinity of southwest Greenland (identified from ground-based magnetometer observations. The breakup was associated with a sudden intensification of the westward auroral electrojet which was centered at about 69 and extended up to some 73 corrected geomagnetic latitude. Ground-based magnetometer data may thus have the potential of indicating when the tomographic method is at risk and may fail. We finally outline the application of tomographic imaging, when combined with magnetic field data, to estimate ionospheric Joule heating rates.

  3. Identification of platform levels

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik

    2005-01-01

    reduction, ability to launch a wider product portfolio without increasing resources and reduction of complexity within the whole company. To support the multiple product development process, platform based product development has in many companies such as Philips, VW, Ford etc. proven to be a very effective...... because the nature of developing platforms and applications are very different. In single product development reuse is often determined by individual designers, in multiple product development reuse is to a large degree a management issue. It is difficult for a company to switch from single to multiple...... development will be examined. Based on the identification of the above characteristics five platform levels are described. The research presented in this paper is a result of MSc, Ph.D projects at the Technical University of Denmark and consultancy projects within the organisation of Institute of Product...

  4. Universal visualization platform

    Science.gov (United States)

    Gee, Alexander G.; Li, Hongli; Yu, Min; Smrtic, Mary Beth; Cvek, Urska; Goodell, Howie; Gupta, Vivek; Lawrence, Christine; Zhou, Jainping; Chiang, Chih-Hung; Grinstein, Georges G.

    2005-03-01

    Although there are a number of visualization systems to choose from when analyzing data, only a few of these allow for the integration of other visualization and analysis techniques. There are even fewer visualization toolkits and frameworks from which one can develop ones own visualization applications. Even within the research community, scientists either use what they can from the available tools or start from scratch to define a program in which they are able to develop new or modified visualization techniques and analysis algorithms. Presented here is a new general-purpose platform for constructing numerous visualization and analysis applications. The focus of this system is the design and experimentation of new techniques, and where the sharing of and integration with other tools becomes second nature. Moreover, this platform supports multiple large data sets, and the recording and visualizing of user sessions. Here we introduce the Universal Visualization Platform (UVP) as a modern data visualization and analysis system.

  5. Geostationary multipurpose platforms

    Science.gov (United States)

    Bekey, I.; Bowman, R. M.

    1981-01-01

    In addition to the advantages generally associated with orbital platforms, such as improved reliability, economies of scale, simple connectivity of elements, reduced tracking demands and the restraint of orbital object population growth, geostationary platforms yield: (1) continuous access by fixed ground antennas for communications services; (2) continuous monitoring of phenomena over chosen regions of the earth's surface; (3) a preferred location for many solar-terrestrial physics experiments. The geostationary platform also offers a low-risk and economical solution to the impending saturation of the orbital arc/frequency spectrum, maximizing the capacity of individual slots and increasing the utility of the entire arc. It also allows the use of many small, simple and inexpensive earth stations through complexity inversion and high power per beam. Block diagram and operational flowcharts are provided.

  6. Platforms for antibiotic discovery.

    Science.gov (United States)

    Lewis, Kim

    2013-05-01

    The spread of resistant bacteria, leading to untreatable infections, is a major public health threat but the pace of antibiotic discovery to combat these pathogens has slowed down. Most antibiotics were originally isolated by screening soil-derived actinomycetes during the golden era of antibiotic discovery in the 1940s to 1960s. However, diminishing returns from this discovery platform led to its collapse, and efforts to create a new platform based on target-focused screening of large libraries of synthetic compounds failed, in part owing to the lack of penetration of such compounds through the bacterial envelope. This article considers strategies to re-establish viable platforms for antibiotic discovery. These include investigating untapped natural product sources such as uncultured bacteria, establishing rules of compound penetration to enable the development of synthetic antibiotics, developing species-specific antibiotics and identifying prodrugs that have the potential to eradicate dormant persisters, which are often responsible for hard-to-treat infections.

  7. System Design and In-orbit Verification of the HJ-1-C SAR Satellite

    OpenAIRE

    Zhang Run-ning; Jiang Xiu-peng

    2014-01-01

    HJ-1-C is a SAR satellite owned by the Chinese Environment and Natural Disaster Monitoring constellation, and works together with the optical satellites HJ-1-A/B for monitoring environment and natural disasters. In this paper, the system design and characteristics of the first Chinese civil SAR satellite are described. In addition, the interface relation between SAR payload and platform is studied. Meanwhile, the data transmission capability, attitude, power, and temperature control that supp...

  8. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2011-01-01

    The Windows Azure Platform has rapidly established itself as one of the most sophisticated cloud computing platforms available. With Microsoft working to continually update their product and keep it at the cutting edge, the future looks bright - if you have the skills to harness it. In particular, new features such as remote desktop access, dynamic content caching and secure content delivery using SSL make the latest version of Azure a more powerful solution than ever before. It's widely agreed that cloud computing has produced a paradigm shift in traditional architectural concepts by providin

  9. Windows Azure Platform

    CERN Document Server

    Redkar, Tejaswi

    2010-01-01

    The Azure Services Platform is a brand-new cloud-computing technology from Microsoft. It is composed of four core components-Windows Azure, .NET Services, SQL Services, and Live Services-each with a unique role in the functioning of your cloud service. It is the goal of this book to show you how to use these components, both separately and together, to build flawless cloud services. At its heart Windows Azure Platform is a down-to-earth, code-centric book. This book aims to show you precisely how the components are employed and to demonstrate the techniques and best practices you need to know

  10. Wireless sensor platform

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Pooran C.; Killough, Stephen M.; Kuruganti, Phani Teja

    2017-08-08

    A wireless sensor platform and methods of manufacture are provided. The platform involves providing a plurality of wireless sensors, where each of the sensors is fabricated on flexible substrates using printing techniques and low temperature curing. Each of the sensors can include planar sensor elements and planar antennas defined using the printing and curing. Further, each of the sensors can include a communications system configured to encode the data from the sensors into a spread spectrum code sequence that is transmitted to a central computer(s) for use in monitoring an area associated with the sensors.

  11. Mobile4D platform

    CSIR Research Space (South Africa)

    Botha, Adèle

    2010-05-01

    Full Text Available . It is a communication platform that has architecture for creating, deploying and managing services and applications by integrating voice, video and data across a range of IP and telecom communication networks. In 2007, Red Hat made a firm commitment... based on the Mobicents muni ations Platform brand. 2.1.5  Telco specific User‐Generated Services   A variety of communication network operators have started initiatives to address User- Generated Services for the Telecom domain. Some...

  12. Space qualified nanosatellite electronics platform for photon pair experiments

    CERN Document Server

    Cheng, Cliff; Tan, Yue Chuan; Ling, Alexander

    2015-01-01

    We report the design and implementation of a complete electronics platform for conducting a quantum optics experiment that will be operated on board a 1U CubeSat (a 10 x 10 x 10 cm satellite). The quantum optics experiment is designed to produce polarization-entangled photon pairs using non-linear optical crystals and requires opto-electronic components such as a pump laser, single photon detectors and liquid crystal based polarization rotators in addition to passive optical elements. The platform provides mechanical support for the optical assembly. It also communicates autonomously with the host satellite to provide experiment data for transmission to a ground station. A limited number of commands can be transmitted from ground to the platform enabling it to switch experimental modes. This platform requires less than 1.5W for all operations, and is space qualified. The implementation of this electronics platform is a major step on the road to operating quantum communication experiments using nanosatellites.

  13. Monitoring Snow Using Geostationary Satellite Retrievals During the SAAWSO Project

    Science.gov (United States)

    Rabin, Robert M.; Gultepe, Ismail; Kuligowski, Robert J.; Heidinger, Andrew K.

    2016-09-01

    The SAAWSO (Satellite Applications for Arctic Weather and SAR (Search And Rescue) Operations) field programs were conducted by Environment Canada near St. Johns, NL and Goose Bay, NL in the winters of 2012-13 and 2013-14, respectively. The goals of these programs were to validate satellite-based nowcasting products, including snow amount, wind intensity, and cloud physical parameters (e.g., cloud cover), over northern latitudes with potential applications to Search And Rescue (SAR) operations. Ground-based in situ sensors and remote sensing platforms were used to measure microphysical properties of precipitation, clouds and fog, radiation, temperature, moisture and wind profiles. Multi-spectral infrared observations obtained from Geostationary Operational Environmental Satellite (GOES)-13 provided estimates of cloud top temperature and height, phase (water, ice), hydrometer size, extinction, optical depth, and horizontal wind patterns at 15 min intervals. In this work, a technique developed for identifying clouds capable of producing high snowfall rates and incorporating wind information from the satellite observations is described. The cloud top physical properties retrieved from operational satellite observations are validated using measurements obtained from the ground-based in situ and remote sensing platforms collected during two precipitation events: a blizzard heavy snow storm case and a moderate snow event. The retrieved snow precipitation rates are found to be comparable to those of ground-based platform measurements in the heavy snow event.

  14. Tethered elevator and platforms as space station facilities: Systems studies and demonstrative experiments

    Science.gov (United States)

    1986-01-01

    Several key concepts of the science and applications tethered platforms were studied. Some conclusions reached are herein listed. Tether elevator and platform could improve the space station scientific and applicative capabilities. The space elevator presents unique characteristics as microgravity facility and as a tethered platform servicing vehicle. Pointing platforms could represent a new kind of observation facility for large class of payloads. The dynamical, control and technological complexity of these concepts advised demonstrative experiments. The on-going tethered satellite system offers the opportunity to perform such experiments. And feasibility studies are in progress.

  15. Lattice Structures For Aerospace Applications

    Science.gov (United States)

    Del Olmo, E.; Grande, E.; Samartin, C. R.; Bezdenejnykh, M.; Torres, J.; Blanco, N.; Frovel, M.; Canas, J.

    2012-07-01

    The way of mass reduction improving performances in the aerospace structures is a constant and relevant challenge in the space business. The designs, materials and manufacturing processes are permanently in evolution to explore and get mass optimization solutions at low cost. In the framework of ICARO project, EADS CASA ESPACIO (ECE) has designed, manufactured and tested a technology demonstrator which shows that lattice type of grid structures is a promising weight saving solution for replacing some traditional metallic and composite structures for space applications. A virtual testing methodology was used in order to support the design of a high modulus CFRP cylindrical lattice technology demonstrator. The manufacturing process, based on composite Automatic Fiber Placement (AFP) technology developed by ECE, allows obtaining high quality low weight lattice structures potentially applicable to a wide range of aerospace structures. Launcher payload adaptors, satellite platforms, antenna towers or instrument supports are some promising candidates.

  16. The NOAA Satellite Observing System Architecture Study

    Science.gov (United States)

    Volz, Stephen; Maier, Mark; Di Pietro, David

    2016-01-01

    NOAA is beginning a study, the NOAA Satellite Observing System Architecture (NSOSA) study, to plan for the future operational environmental satellite system that will follow GOES and JPSS, beginning about 2030. This is an opportunity to design a modern architecture with no pre-conceived notions regarding instruments, platforms, orbits, etc. The NSOSA study will develop and evaluate architecture alternatives to include partner and commercial alternatives that are likely to become available. The objectives will include both functional needs and strategic characteristics (e.g., flexibility, responsiveness, sustainability). Part of this study is the Space Platform Requirements Working Group (SPRWG), which is being commissioned by NESDIS. The SPRWG is charged to assess new or existing user needs and to provide relative priorities for observational needs in the context of the future architecture. SPRWG results will serve as input to the process for new foundational (Level 0 and Level 1) requirements for the next generation of NOAA satellites that follow the GOES-R, JPSS, DSCOVR, Jason-3, and COSMIC-2 missions.

  17. A native IP satellite communications system

    Science.gov (United States)

    Koudelka, O.; Schmidt, M.; Ebert, J.; Schlemmer, H.; Kastner-Puschl, S.; Riedler, W.

    2004-08-01

    ≪ In the framework of ESA's ARTES-5 program the Institute of Applied Systems Technology (Joanneum Research) in cooperation with the Department of Communications and Wave Propagation has developed a novel meshed satellite communications system which is optimised for Internet traffic and applications (L*IP—Local Network Interconnection via Satellite Systems Using the IP Protocol Suite). Both symmetrical and asymmetrical connections are supported. Bandwidth on demand and guaranteed quality of service are key features of the system. A novel multi-frequency TDMA access scheme utilises efficient methods of IP encapsulation. In contrast to other solutions it avoids legacy transport network techniques. While the DVB-RCS standard is based on ATM or MPEG transport cells, the solution of the L*IP system uses variable-length cells which reduces the overhead significantly. A flexible and programmable platform based on Linux machines was chosen to allow the easy implementation and adaptation to different standards. This offers the possibility to apply the system not only to satellite communications, but provides seamless integration with terrestrial fixed broadcast wireless access systems. The platform is also an ideal test-bed for a variety of interactive broadband communications systems. The paper describes the system architecture and the key features of the system.

  18. Satellite Meteorology Education Resources Freely Available from COMET°

    Science.gov (United States)

    Abshire, W. E.; Dills, P. N.

    2011-12-01

    The COMET° Program (www.comet.ucar.edu) receives funding from NOAA NESDIS, EUMETSAT, and the Meteorological Service of Canada to support education and training efforts in satellite meteorology. These partnerships enable COMET to create educational materials of global interest on the application of products from geostationary and polar-orbiting remote sensing platforms. Recently, COMET's satellite education programs have focused on both current and next generation satellites and their relevance to operational forecasters and other communities. By partnering with experts from the Naval Research Laboratory, NOAA-NESDIS and its Cooperative Institutes, MSC, and other user communities, COMET stimulates greater utilization of satellite data and products. COMET also continues to broaden the scope of its training to include materials on the EUMETSAT Polar-orbiting System (EPS) and Meteosat geostationary satellites. EPS represents an important contribution to the Initial Joint Polar System between NOAA and EUMETSAT, while Meteosat Second Generation imaging capabilities provide an authentic proving ground for the next-generation GOES-R imager. This presentation provides an overview of COMET's recent satellite education efforts including courses and publications that focus on topics like multispectral RGB products, detecting atmospheric dust, and climate monitoring from satellites. Over 50 satellite-focused self-paced online materials are freely available via the Satellite Topic area of the MetEd Web site (www.meted.ucar.edu/topics/modules/satellite) and COMET's Environmental Satellite Resource Center (ESRC)(www.meted.ucar.edu/esrc). The ESRC, another important resource developed for use by the geosciences and education communities, is a searchable, database driven Web site that provides easy access to a wide range of useful information and training materials on Earth-observing satellites. Simple free online registration is required to access all training materials and the

  19. Study on POST Structure Strength Analysis of Tension Leg Platform%张力腿平台POST结构强度分析

    Institute of Scientific and Technical Information of China (English)

    梁瑜

    2016-01-01

    为确保深海中张力腿平台( TLP)结构的安全和可靠运行,针对TLP平台关键部位:连接船体与上部组块的对接立柱( POST)的结构强度,采用ANSYS软件建立TLP平台的"POST"结构模型,分析在位工况:一年一遇、百年一遇以及千年一遇等环境条件下的POST结构强度,确定POST这一TLP关键结构满足强度要求,计算分析结果合理,可为TLP平台的POST结构强度评估提供参考.%In order to insure the safe and reliable service of TLP in deep water , the strength of POST structure for TLP is studied.The finite element model of the POST structure of TLP is established in ANSYS and the local strength analysis are per -formed under 1 year operating condition , 100 year extreme storm condition and 1000 year survival condition respectively .The conclusion can be reached that the main structure of POST structure can meet strength requirement .The calculating result provid-ed basis for evaluation of POST structure strength .

  20. Games and Platform Decisions

    DEFF Research Database (Denmark)

    Hansen, Poul H. Kyvsgård; Mikkola, Juliana Hsuan

    2007-01-01

    is the application of on-line games in order to provide training for decision makers and in order to generate overview over the implications of platform decisions. However, games have to be placed in a context with other methods and we argue that a mixture of games, workshops, and simulations can provide improved...

  1. Creative Platform Learning (CPL)

    DEFF Research Database (Denmark)

    Christensen, Jonna Langeland; Hansen, Søren

    Creative Platform Learning (CPL) er en pædagogisk metode, der skaber foretagsomme og innovative elever, der kan anvende deres kreativitet til at lære nyt. Ifølge den nye skolereform skal Innovation og entreprenørskab tydeliggøres i alle fag. I CPL er det en integreret del af undervisningen...

  2. Games and Platform Decisions

    DEFF Research Database (Denmark)

    Hansen, Poul H. Kyvsgård; Mikkola, Juliana Hsuan

    2007-01-01

    is the application of on-line games in order to provide training for decision makers and in order to generate overview over the implications of platform decisions. However, games have to be placed in a context with other methods and we argue that a mixture of games, workshops, and simulations can provide improved...

  3. Web platform for functional design

    Science.gov (United States)

    Dijmarescu, M. R.; Dijmarescu, M. C.

    2015-11-01

    Today's global competitive trends, especially those related to industries, determine a much higher degree of pressure and demands for substantial innovation driven improvements, flexible and time sensitive solutions. Improving and optimizing the design activity by shortening its timeline and maintaining a high quality level for its output have become the main success factors. The evolution of design activity is strongly related to the evolution of education and research made in the design field. Thus, the development of web tools which can contain knowledge about mechanical products functionality and structure may be an important achievement for the education and industry. This paper presents a web platform which contains functional-constructive knowledge in the area of mechanical design field and was developed to support design activity. The proposed web tool can provide any user, even one without background in design theory, information about the functionality of products and the way it is related to the product structure.

  4. SODART optical block of the SRG satellite

    DEFF Research Database (Denmark)

    Christensen, Finn Erland; Frederiksen, P.; Polny, Josef

    1998-01-01

    This paper describes the design and the successful integration of the optical block of the SODART telescopes to be flown on the Spectrum Roentgen Gamma satellite. The integration involves both the integration of the two high throughput x-ray telescopes as well as the objective crystal spectrometer....... The integrated unit meets all mechanical, thermal and optical specifications and it is now in safe storage in Moscow and awaits further integration procedures with the remaining satellite structure....

  5. Thermal deformations of a glass spherical satellite

    Science.gov (United States)

    Vasiliev, V. P.; Nenadovich, V. D.; Murashkin, V. V.; Sokolov, A. L.

    2016-09-01

    The effect of the kind of the reflecting coating of a glass spherical satellite on thermal deformations caused by the solar irradiation is considered. Two types of coating deposited on one of the hemispheres are considered: aluminum with a protective layer of bakelite varnish and interference dielectric coating for two orientations of the satellite orbit. Structures of a multilayer dielectric coating and technologies of its deposition are described.

  6. Advanced fluidic handling and use of two-phase flow for high throughput structural investigation of proteins on a microfluidic sample preparation platform

    DEFF Research Database (Denmark)

    Lafleur, Josiane P.; Snakenborg, Detlef; Møller, M.

    2010-01-01

    Research on the structure of proteins can bring forth a wealth of information about biological function and can be used to better understand the processes in living cells. This paper reports a new microfluidic sample preparation system for the structural investigation of proteins by Small Angle X......-ray Scattering (SAXS). The system includes hardware and software features for precise fluidic control, synchrotron beamline control, UV absorbance measurements and automated data analysis. The precise fluidic handling capabilities are used to transport and precisely position samples as small as 500 n...

  7. Mobile satellite communications handbook

    CERN Document Server

    Cochetti, Roger

    2014-01-01

    With a Preface by noted satellite scientist Dr. Ahmad Ghais, the Second Edition reflects the expanded user base for this technology by updating information on historic, current, and planned commercial and military satellite systems and by expanding sections that explain the technology for non-technical professionals.   The book begins with an introduction to satellite communications and goes on to provide an overview of the technologies involved in mobile satellite communications, providing basic introductions to RF Issues, power Issues, link issues and system issues. It describes

  8. Satellite communication antenna technology

    Science.gov (United States)

    Mittra, R. (Editor); Imbriale, W. A. (Editor); Maanders, E. J. (Editor)

    1983-01-01

    A general overview of current technology in the field of communication satellite antennas is presented. Among the topics discussed are: the design of multiple beam systems; frequency reuse; and polarization control of antenna measurements. Consideration is also given to: contour beam synthesis; dual shaped reflector synthesis; beam shaping; and offset reflector design. The applications of the above technologies to present and future generations of communications satellites is considered, with emphasis given to such systems as: the Intelsats; the Defense Satellite Communications System, (DSCS-III); Satellite Business System (SBS), and Comstar.

  9. Methods of satellite oceanography

    Science.gov (United States)

    Stewart, R. H.

    1985-01-01

    The theoretical basis for remote sensing measurements of climate and ocean dynamics is examined. Consideration is given to: the absorption of electromagnetic radiation in the atmosphere; scattering in the atmosphere; and satellite observations using visible light. Consideration is also given to: the theory of radio scatter from the sea; scatter of centimeter waves from the sea; and the theory of operation of synthetic aperture radars. Additional topics include: the coordinate systems of satellite orbits for oceanographic remote sensing applications; the operating features of the major U.S. satellite systems for viewing the ocean; and satellite altimetry.

  10. JPSS Preparations at the Satellite Proving Ground for Marine, Precipitation, and Satellite Analysis

    Science.gov (United States)

    Folmer, M. J.; Berndt, E.; Clark, J.; Orrison, A.; Kibler, J.; Sienkiewicz, J. M.; Nelson, J. A., Jr.; Goldberg, M.

    2016-12-01

    The National Oceanic and Atmospheric Administration (NOAA) Satellite Proving Ground (PG) for Marine, Precipitation, and Satellite Analysis (MPS) has been demonstrating and evaluating Suomi National Polar-orbiting Partnership (S-NPP) products along with other polar-orbiting satellite platforms in preparation for the Joint Polar Satellite System - 1 (JPSS-1) launch in March 2017. The first S-NPP imagery was made available to the MPS PG during the evolution of Hurricane Sandy in October 2012 and has since been popular in operations. Since this event the MPS PG Satellite Liaison has been working with forecasters on ways to integrate single-channel and multispectral imagery from the Visible Infrared Imaging Radiometer Suite (VIIRS), the Moderate Resolution Imaging Spectroradiometer (MODIS), and the Advanced Very High Resolution Radiometer (AVHRR)into operations to complement numerical weather prediction and geostationary satellite savvy National Weather Service (NWS) National Centers. Additional unique products have been introduced to operations to address specific forecast challenges, including the Cooperative Institute for Research in the Atmosphere (CIRA) Layered Precipitable Water, the National Environmental Satellite, Data, and Information Service (NESDIS) Snowfall Rate product, NOAA Unique Combined Atmospheric Processing System (NUCAPS) Soundings, ozone products from the Atmospheric Infrared Sounder (AIRS), Cross-track Infrared Sounder/Advanced Technology Microwave Sounder (CrIS/ATMS), and Infrared Atmospheric Sounding Interferometer (IASI). In addition, new satellite domains have been created to provide forecasters at the NWS Ocean Prediction Center and Weather Prediction Center with better quality imagery at high latitudes. This has led to research projects that are addressing forecast challenges such as tropical to extratropical transition and explosive cyclogenesis. This presentation will provide examples of how the MPS PG has been introducing and integrating

  11. Structure and evolution of the Sura-Kama strike-slip zone in the Cenozoic (the Volga-Ural anteclise of the East European Platform)

    Science.gov (United States)

    Kolodyazhnyi, S. Yu.

    2015-07-01

    The Sura-Kama zone (SKZ) complicates the central area of the Volga-Ural anteclise and extends sublaterally from the Sura River basin towards the Kama River at a distance of 700-750 km. Based on the analysis of geological-geophysical data and structural studies, a model for the tectonic structure and the evolution of the SKZ is developed. This is a deep tectonic fault that shows the features of long-term polystage development. During the latest Cimmerian-Alpine period of tectonic reactivation, the SKZ represented a zone of strike-slip and consecutive manifestation of early transpressional right-lateral strike-slip dislocations that changed to left-lateral strike-slip displacements under transtension settings as a result of kinematic inversion. Features of the heterogeneous structure of the SKZ are revealed. The segments formed by the system of strike-slip duplexes are alternated along the strike by the principle of rotation-fold and "domino" structures. The particular models of evolution of these segments are proposed by the examples of the widely known Karlin, Tetyushin, and Lower Kama dislocations. It is assumed that kinematic inversion and compression-decompression phenomena on the flanks of the SKZ, as well as the tectonic environments in the area of its dynamic influence were highly important for the development of the processes of migration and redistribution of hydrocarbon components.

  12. Mobile Platforms and Development Environments

    CERN Document Server

    Helal, Sumi; Li, Wengdong

    2012-01-01

    Mobile platform development has lately become a technological war zone with extremely dynamic and fluid movement, especially in the smart phone and tablet market space. This Synthesis lecture is a guide to the latest developments of the key mobile platforms that are shaping the mobile platform industry. The book covers the three currently dominant native platforms -- iOS, Android and Windows Phone -- along with the device-agnostic HTML5 mobile web platform. The lecture also covers location-based services (LBS) which can be considered as a platform in its own right. The lecture utilizes a sampl

  13. Platform Technology for Developing Purification Processes

    NARCIS (Netherlands)

    Eppink, M.H.M.; Schreurs, R.; Gijsen, A.; Verhoeven, K.

    2009-01-01

    To shorten time to market for new therapeutic proteins, new and fast methods, such as high throughput screening, are needed to speed up downstream processing. The platform technology discussed in this article includes a structural approach that can be used as a general procedure to purify therapeuti

  14. Design of a Reconfigurable Platform for Navigation Signal Simulation

    Directory of Open Access Journals (Sweden)

    Ming Dexiang

    2013-05-01

    Full Text Available Navigation signal simulator can generate signals consistent with real GNSS (Global Navigation Satellite System signals, which can be processed by GNSS receivers in the same manner as it processes satellite signals in a real testing environment. The simulator can offer a high-fidelity means of testing GNSS receivers and other related systems. Such tests can be carried out in laboratories due to control of the GNSS constellation and global atmospheric environment by a single device. The navigation signal simulator, which can provide a real-like environment for the research and testing of navigation receivers, has been the key instrument for developing navigation systems and receiving devices, particularly for high-dynamic receivers. Therefore it has increasingly received widespread attentions in military and industrial sectors. With the development of a variety of new navigation systems and signal standards, there is a higher demand for the compatibility and renewal speed of the navigation signal simulators; specifically, it should be multi-mode and reconfigurable in order to realize the flexible design of navigation systems. Although a lot of GNSS simulators have been developed and used, the reconfigurable technologies have not yet appeared in the literature and applied to practices. This means that the existing simulators cannot achieve simulation of multiple GNSS signals by reconfiguration of the software and hardware on the same platform. In this paper, a new reconfigurable platform for navigation signal simulation is proposed and studied, aiming to simulate multi-mode and multi-frequency navigation signals. The performance of the proposed platform is validated from three perspectives: mathematic simulation software, output signals and receiver operation. The result shows that the platform can generate multi-mode and multi-frequency navigation signals through reconfiguration of the software and hardware on the same platform, hence supporting

  15. Automated microfluidic sample-preparation platform for high-throughput structural investigation of proteins by small-angle X-ray scattering

    DEFF Research Database (Denmark)

    Lafleur, Josiane P.; Snakenborg, Detlef; Nielsen, Søren Skou

    2011-01-01

    A new microfluidic sample-preparation system is presented for the structural investigation of proteins using small-angle X-ray scattering (SAXS) at synchrotrons. The system includes hardware and software features for precise fluidic control, sample mixing by diffusion, automated X-ray exposure...... control, UV absorbance measurements and automated data analysis. As little as 15 l of sample is required to perform a complete analysis cycle, including sample mixing, SAXS measurement, continuous UV absorbance measurements, and cleaning of the channels and X-ray cell with buffer. The complete analysis...... cycle can be performed in less than 3 min. Bovine serum albumin was used as a model protein to characterize the mixing efficiency and sample consumption of the system. The N2 fragment of an adaptor protein (p120-RasGAP) was used to demonstrate how the device can be used to survey the structural space...

  16. A Method for Analyzing System Reliability of Existing Jacket Platforms

    Institute of Scientific and Technical Information of China (English)

    HE Yong; GONG Shun-feng; JIN Wei-liang

    2008-01-01

    Owing to the ageing of the existing structures worldwide and the lack of codes for the continued safety management of structures during their lifetime, it is very necessary to develop a tool to evaluate their system reliability over a time interval. In this paper, a method is proposed to analyze system reliability of existing jacket platforms. The influences of dint, crack and corrosion are considered. The mechanics characteristics of the existing jacket platforms to extreme loads are analyzed by use of the nonlinear mechanical analysis. The nonlinear interaction of pile-soil-structure is taken into consideration in the analysis. By use of FEM method and Monte Carlo simulation, the system reliability of the existing jacket platform can be obtained. The method has been illustrated through application to BZ28-1 three jacket platforms which have operated for sixteen years. Advantages of the proposed method for analyzing the system reliability of the existing jacket platform is also highlighted.

  17. Seasonal dynamics of surface chlorophyll concentration and sea surface temperature, as indicator of hydrological structure of the ocean (by satellite data)

    Science.gov (United States)

    Shevyrnogov, Anatoly; Vysotskaya, Galina

    Continuous monitoring of phytopigment concentrations and sea surface temperature in the ocean by space-borne methods makes possible to estimate ecological condition of biocenoses in critical areas. Unlike land vegetation, hydrological processes largely determine phytoplank-ton dynamics, which may be either recurrent or random. The types of chlorophyll concentration dynamics and sea surface temperature can manifest as zones quasistationary by seasonal dynamics, quasistationary areas (QSA). In the papers of the authors (A. Shevyrnogov, G. Vysotskaya, E. Shevyrnogov, A study of the stationary and the anomalous in the ocean surface chlorophyll distribution by satellite data. International Journal of Remote Sensing, Vol. 25, №7-8, pp. 1383-1387, April 2004 & A. P. Shevyrnogov, G. S. Vysotskaya, J. I. Gitelson, Quasistationary areas of chlorophyll concentra-tion in the world ocean as observed satellite data Advances in Space Research, Volume 18, Issue 7, Pages 129-132, 1996) existence of zones, which are quasi-stationary with similar seasonal dynamics of chlorophyll concentration at surface layer of ocean, was shown. Results were obtained on the base of processing of time series of satellite images SeaWiFS. It was shown that fronts and frontal zones coincide with dividing lines between quasi-stationary are-as, especially in areas of large oceanic streams. To study the dynamics of the ocean for the period from 1985 through 2012 we used data on the temperature of the surface layer of the ocean and chlorophyll concentration (AVHRR, SeaWiFS and MODIS). Biota of surface oceanic layer is more stable in comparison with quickly changing surface tem-perature. It gives a possibility to circumvent influence of high-frequency component (for exam-ple, a diurnal cycle) in investigation of dynamics of spatial distribution of surface streams. In addition, an analyses of nonstable ocean productivity phenomena, stood out time series of satellite images, showed existence of areas with

  18. Fuzzy logic techniques for rendezvous and docking of two geostationary satellites

    Science.gov (United States)

    Ortega, Guillermo

    1995-01-01

    Large assemblings in space require the ability to manage rendezvous and docking operations. In future these techniques will be required for the gradual build up of big telecommunication platforms in the geostationary orbit. The paper discusses the use of fuzzy logic to model and implement a control system for the docking/berthing of two satellites in geostationary orbit. The system mounted in a chaser vehicle determines the actual state of both satellites and generates torques to execute maneuvers to establish the structural latching. The paper describes the proximity operations to collocate the two satellites in the same orbital window, the fuzzy guidance and navigation of the chaser approaching the target and the final Fuzzy berthing. The fuzzy logic system represents a knowledge based controller that realizes the close loop operations autonomously replacing the conventional control algorithms. The goal is to produce smooth control actions in the proximity of the target and during the docking to avoid disturbance torques in the final assembly orbit. The knowledge of the fuzzy controller consists of a data base of rules and the definitions of the fuzzy sets. The knowledge of an experienced spacecraft controller is captured into a set of rules forming the Rules Data Base.

  19. 基于动态表格格式的数据上报平台的研发%Research and development of data reporting platform based on dynamic structured table

    Institute of Scientific and Technical Information of China (English)

    肖招娣

    2015-01-01

    In daily manufacturing, management and marketing of our company,there are a huge number of data collection tasks. Since the variety of the total number of columns and the type of each column, the regular data collection funcion based on fixed database table design can not satisfy the various business requirements. To solve the efficiency problems bringing by offline data collection, we developped a data reporting platform based on dynamic structured table. This paper is about the key technologies related to the research and development process of this platform. The application of this platform reduces the cost of human resources. On average, each data collection task takes about one hour, which now takes about 10 minutes. That is to say, it saves about 5/6 time for each task.%在企业日常的生产、管理、营销过程中,存在着大量的数据收集、汇总工作。由于这些表格所包含的列数、每列的属性类别各异,常规的基于固定数据库表设计的数据收集功能无法满足多变的应用需求。为了解决线下收集数据带来的工作效率低、合并过程难以避免出错、数据没有集中存放的问题,我局开发了基于动态表格格式的数据上报平台,本文对研发过程中的关键技术进行总结。该平台的投运,节省了人力资源成本支出。采用该技术后,数据收集和汇总相关的工作从平均单份1小时的工作量缩减为10分钟的工作量,约节约了5/6的时间成本。

  20. Satellites of spiral galaxies

    Science.gov (United States)

    Zaritsky, Dennis; Smith, Rodney; Frenk, Carlos; White, Simon D. M.

    1993-01-01

    We present a survey of satellites around a homogeneous set of late-type spirals with luminosity similar to that of the Milky Way. On average, we find fewer than 1.5 satellites per primary, but we argue that we can treat the survey as an ensemble and so derive the properties of the halo of a 'typical' isolated spiral. The projected density profile of the ensemble falls off approximately as 1/r. Within 50 kpc the azimuthal distribution of satellites shows some evidence for the 'Holmberg effect', an excess near the minor axis of the primary; however, at larger projected distances, the distribution appears isotropic. There is a weak but significant correlation between the size of a satellite and its distance from its primary, as expected if satellites are tidally truncated. Neither Hubble type nor spectral characteristics correlate with apparent separation. The ensemble of satellites appears to be rotating at about 30 km/s in the same direction as the galactic disk. Satellites on prograde orbits tend to be brighter than those on retrograde orbits. The typical velocity difference between a satellite and its primary shows no clear dependence either on apparent separation, or on the rotation speed of the primary. Thus our survey demonstrates that isolated spiral galaxies have massive halos that extend to many optical radii.