WorldWideScience

Sample records for platform systems concepts

  1. Common tester platform concept.

    Energy Technology Data Exchange (ETDEWEB)

    Hurst, Michael James

    2008-05-01

    This report summarizes the results of a case study on the doctrine of a common tester platform, a concept of a standardized platform that can be applicable across the broad spectrum of testing requirements throughout the various stages of a weapons program, as well as across the various weapons programs. The common tester concept strives to define an affordable, next-generation design that will meet testing requirements with the flexibility to grow and expand; supporting the initial development stages of a weapons program through to the final production and surveillance stages. This report discusses a concept investing key leveraging technologies and operational concepts combined with prototype tester-development experiences and practical lessons learned gleaned from past weapons programs.

  2. CONCEPTION OF THE ARDUINO PLATFORM AS A BASE FOR THE CONSTRUCTION OF DISTRIBUTED DIAGNOSTIC SYSTEMS

    Directory of Open Access Journals (Sweden)

    Tomasz HANISZEWSKI

    2016-12-01

    Full Text Available Systems for distributed parameter measurements are very expensive solutions; however, they offer many possibilities in terms of real-time verification of machine status. Of course, ready, complex and easy-to-use measuring systems can be used, where the cost of such a solution may be prohibitive. In the case of research carried out under the experimental sphere of an object, e.g., using a research measurement system, it is possible to create a project for a system based mainly on the Arduino platform. As an example, the concept of a distributed measurement system will be presented, with the possibility for use on cranes and conveyors, i.e., on the most common machines on industrial plants.

  3. CONCEPT OF MANAGEMENT SYSTEM PLATFORM MOBILE ROBOT BASED ON SERIAL TRACTOR «BELARUS 132»

    Directory of Open Access Journals (Sweden)

    M. M. Tatur

    2015-01-01

    Full Text Available It is announced an innovative project to create a prototype multi­robotic system. A distinctive feature of the project – the maximum use of components and software of domestic production. The mobile robot used the concept of multi­level management system, according to which the majority of workload is on­board computer. This will reduce the amount of data transmitted over a wireless link, and increase the efficiency of the development of algorithms for higher­level control.

  4. Design concepts for a nuclear digital instrumentation and control system platform

    Energy Technology Data Exchange (ETDEWEB)

    Ou, T. C.; Chen, C. K.; Chen, P. J.; Shyu, S. S.; Lee, C. L. [Institute of Nuclear Energy Research, Atomic Energy Council, No. 1000 Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546 Taiwan (China); Hsieh, S. F., E-mail: tcou@iner.gov.t [Electronics Group, Formosa Plastics Co., 100 Sue-Guan Road, Jen-Wu Hsiang, Kaohsiung County, Taiwan (China)

    2010-10-15

    The objective of this paper is to present the development results of the nuclear instrumentation and control system in Taiwan. As the Taiwan nuclear power plants age, the need to consider upgrading of both their safety and non-safety-related instrumentation and control systems becomes more urgent. Meanwhile, the digital instrumentation and control system that is based on current fast evolving electronic and information technologies are difficult to maintain effectively. Therefore, Institute of Nuclear Energy Research was made a decision to promote the Taiwan Nuclear Instrumentation and Control System project to collaborate with domestic electronic industry to establish self-reliant capabilities on the design, manufacturing, and application of nuclear instrumentation and control systems with newer technology. In the case of safety-related applications like nuclear instrumentation and control, safety-oriented quality control is required. In order to establish a generic qualified digital platform, the world-wide licensing experience should be considered in the licensing process. This paper describes the qualification and certification tools by IEC 61508 for design and development of safety related equipment and explains the basis for many decisions made while performing the digital upgrade. (Author)

  5. Sensor programming and concept implementation of a temperature monitoring system, using Arduino as prototyping platform

    DEFF Research Database (Denmark)

    Sbîrnă, Sebastian; Søberg, Peder Veng; Sbîrnă, Liana Simona

    2016-01-01

    The present work reports the programming paradigms that have been developed for a temperature monitoring system able to provide accurate data regarding food temperatures inside refrigerated vehicles and alert the driver accordingly, in relation to which temperature states are encountered. The men...

  6. Concept and architecture of the RHIC LLRF upgrade platform

    Energy Technology Data Exchange (ETDEWEB)

    Smith, K.S.; Hayes, T.; Severino, F.

    2011-03-28

    The goal of the RHIC LLRF upgrade has been the development of a stand alone, generic, high performance, modular LLRF control platform, which can be configured to replace existing systems and serve as a common platform for all new RF systems. The platform is also designed to integrate seamlessly into a distributed network based controls infrastructure, be easy to deploy, and to be useful in a variety of digital signal processing and data acquisition roles. Reuse of hardware, software and firmware has been emphasized to minimize development effort and maximize commonality of system components. System interconnection, synchronization and scaling are facilitated by a deterministic, high speed serial timing and data link, while standard intra and inter chassis communications utilize high speed, non-deterministic protocol based serial links. System hardware configuration is modular and flexible, based on a combination of a main carrier board which can host up to six custom or commercial daughter modules as required to implement desired functionality. This paper will provide an overview of the platform concept, architecture, features and benefits. The RHIC LLRF Upgrade Platform has been developed with the goal of providing a flexible, modular and scalable architecture which will support our current applications and satisfy new ones for the foreseeable future. The platform has been recently commissioned at both RHIC and the RHIC EBIS injector. To date the platform has demonstrated its versatility and utility, meeting the design goals as originally defined.

  7. Modular Platforms for Optofluidic Systems

    Science.gov (United States)

    Brammer, Marko; Mappes, Timo

    2014-01-01

    Optofluidics is increasingly gaining impact in a number of different fields of research, namely biology and medicine, environmental monitoring and green energy. However, the market for optofluidic products is still in the early development phase. In this manuscript, we discuss modular platforms as a potential concept to facilitate the transfer of optofluidic sensing systems to an industrial implementation. We present microfluidic and optical networks as a basis for the interconnection of optofluidic sensor modules. Finally, we show the potential for entire optofluidic networks

  8. A System Engineering Study and Concept Development for a Humanitarian Aid and Disaster Relief Operations Management Platform

    Science.gov (United States)

    2016-09-01

    collection for the COP by HADR Responders. The mobile hardware includes ruggedized smartphones (iPhone and Android operating systems), tablets, and smart...assessment information on a live interactive map. Location tagged photos are automatically uploaded from the UN-ASIGN smartphone app (UNOSAT 2015...responders used mobile smartphone technology to provide needs assessments and monitoring. However, according to the Nepal Earthquake Appeal Response Review

  9. Platform attitude data acquisition system

    Digital Repository Service at National Institute of Oceanography (India)

    Afzulpurkar, S.

    A system for automatic acquisition of underwater platform attitude data has been designed, developed and tested in the laboratory. This is a micro controller based system interfacing dual axis inclinometer, high-resolution digital compass...

  10. A Real-Time Open Access Platform Towards Proof of Concept for Smart Grid Applications

    DEFF Research Database (Denmark)

    Kemal, Mohammed Seifu; Petersen, Lennart; Iov, Florin

    2017-01-01

    This paper presents development of real time open access platform towards proof of concept of smart grid applications deployed at Smart Energy System Laboratory of Aalborg University. Discussed on the paper is the architecture and set-up of the platform by elaborating the three main layers...

  11. The onboard control system of "Navigator" platform

    Science.gov (United States)

    Syrov, A. S.; Smirnov, V. V.; Sokolov, V. N.; Iodko, G. S.; Mischikhin, V. V.; Kosobokov, V. N.; Shatskii, M. A.; Dobrynin, D. A.

    2016-12-01

    A brief description of the design concept, structure and performance of the onboard control system (AOCS) of the "Navigator" satellite platform, on the basis of which the spacecraft "Electro-L' and "Spektr-R" are designed, is presented. The test-flight results of the AOCS attitude accuracy are given. Approaches to the further development of the onboard control equipment for advanced spacecraft are determined and presented.

  12. Integrating Software Architecture Concepts into the MDA Platform with UML Profile

    Directory of Open Access Journals (Sweden)

    Adel Alti

    2007-01-01

    Full Text Available Architecture Description Languages (ADLs provide an abstract representation of software systems. Achieving a concrete mapping of such representation into the implementation is one of the principal aspects of MDA (Model Driven Architecture. Integration of ADLs within MDA confers to the MDA platform a higher level of abstraction and a degree of reuse of ADLs. Indeed they have significantly different platform metamodels which make the definition of mapping rules complex. This complexity is clearly noticeable when some software architecture concepts cannot be easily mapped to MDA platform. In this research, we propose to integrate software architecture within MDA. We define also strategy for direct transformation using a UML profile. It represents both software architecture model (PIM and MDA platform model (PSM in UML meta-model then elaborates transformation rules between results UML meta-models. The goal is to automate the process of deriving implementation platform from software concepts.

  13. Model Fusion Tool - the Open Environmental Modelling Platform Concept

    Science.gov (United States)

    Kessler, H.; Giles, J. R.

    2010-12-01

    The vision of an Open Environmental Modelling Platform - seamlessly linking geoscience data, concepts and models to aid decision making in times of environmental change. Governments and their executive agencies across the world are facing increasing pressure to make decisions about the management of resources in light of population growth and environmental change. In the UK for example, groundwater is becoming a scarce resource for large parts of its most densely populated areas. At the same time river and groundwater flooding resulting from high rainfall events are increasing in scale and frequency and sea level rise is threatening the defences of coastal cities. There is also a need for affordable housing, improved transport infrastructure and waste disposal as well as sources of renewable energy and sustainable food production. These challenges can only be resolved if solutions are based on sound scientific evidence. Although we have knowledge and understanding of many individual processes in the natural sciences it is clear that a single science discipline is unable to answer the questions and their inter-relationships. Modern science increasingly employs computer models to simulate the natural, economic and human system. Management and planning requires scenario modelling, forecasts and ‘predictions’. Although the outputs are often impressive in terms of apparent accuracy and visualisation, they are inherently not suited to simulate the response to feedbacks from other models of the earth system, such as the impact of human actions. Geological Survey Organisations (GSO) are increasingly employing advances in Information Technology to visualise and improve their understanding of geological systems. Instead of 2 dimensional paper maps and reports many GSOs now produce 3 dimensional geological framework models and groundwater flow models as their standard output. Additionally the British Geological Survey have developed standard routines to link geological

  14. Development of deployable structures for large space platform systems, volume 1

    Science.gov (United States)

    1982-01-01

    Generic deployable spacecraft configurations and deployable platform systems concepts were identified. Sizing, building block concepts, orbiter packaging, thermal analysis, cost analysis, and mass properties analysis as related to platform systems integration are considered. Technology needs are examined and the major criteria used in concept selection are delineated. Requirements for deployable habitat modules, tunnels, and OTV hangars are considered.

  15. Venus Atmospheric Maneuverable Platform (VAMP) - A Low Cost Venus Exploration Concept

    Science.gov (United States)

    Lee, G.; Polidan, R. S.; Ross, F.

    2015-12-01

    The Northrop Grumman Aerospace Systems and L-Garde team has been developing an innovative mission concept: a long-lived, maneuverable platform to explore the Venus upper atmosphere. This capability is an implementation of our Lifting Entry Atmospheric Flight (LEAF) system concept, and the Venus implementation is called the Venus Atmospheric Maneuverable Platform (VAMP). The VAMP concept utilizes an ultra-low ballistic coefficient (aircraft that deploys prior to entering the Venus atmosphere, enters without an aeroshell, and provides a long-lived (months to a year) maneuverable vehicle capable of carrying science instruments to explore the Venus upper atmosphere. In this presentation we provide an update on the air vehicle design and a low cost pathfinder mission concept that can be implemented in the near-term. The presentation also provides an overview of our plans for future trade studies, analyses, and prototyping to advance and refine the concept. We will discuss the air vehicle's entry concepts of operations (CONOPs) and atmospheric science operations. We will present a strawman concept of a VAMP pathfinder, including ballistic coefficient, planform area, percent buoyancy, wing span, vehicle mass, power supply, propulsion, materials considerations, structural elements, and instruments accommodation. In this context, we will discuss the following key factors impacting the design and performance of VAMP: Entry into the Venus atmosphere, including descent profile, heating rate, total heat load, stagnation, and acreage temperatures Impact of maximum altitude on air vehicle design and entry heating Candidate thermal protection system (TPS) requirements We will discuss the interdependencies of the above factors and the manner in which the VAMP pathfinder concept's characteristics affect the CONOPs and the science objectives. We will show how the these factors provide constraints as well as enable opportunities for novel long duration scientific studies of the Venus

  16. Experimental platforms for behavioral experiments on social-ecological systems

    Directory of Open Access Journals (Sweden)

    Marco A. Janssen

    2014-12-01

    Full Text Available Recently, there has been an increased interest in using behavioral experiments to study hypotheses on the governance of social-ecological systems. A diversity of software tools are used to implement such experiments. We evaluated various publicly available platforms that could be used in research and education on the governance of social-ecological systems. The aims of the various platforms are distinct, and this is noticeable in the differences in their user-friendliness and their adaptability to novel research questions. The more easily accessible platforms are useful for prototyping experiments and for educational purposes to illustrate theoretical concepts. To advance novel research aims, more elaborate programming experience is required to either implement an experiment from scratch or adjust existing experimental software. There is no ideal platform best suited for all possible use cases, but we have provided a menu of options and their associated trade-offs.

  17. High altitude aerodynamic platform concept evaluation and prototype engine testing

    Science.gov (United States)

    Akkerman, J. W.

    1984-01-01

    A design concept has been developed for maintaining a 150-pound payload at 60,000 feet altitude for about 50 hours. A 600-pound liftoff weight aerodynamic vehicle is used which operates at sufficient speeds to withstand prevailing winds. It is powered by a turbocharged four-stoke cycle gasoline fueled engine. Endurance time of 100 hours or more appears to be feasible with hydrogen fuel and a lighter payload. A prototype engine has been tested to 40,000 feet simulated altitude. Mismatch of the engine and the turbocharger system flow and problems with fuel/air mixture ratio control characteristics prohibited operation beyond 40,000 feet. But there seems to be no reason why the concept cannot be developed to function as analytically predicted.

  18. A Real-Time Simulation Platform for Power System Operation

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Østergaard, Jacob; Wu, Qiuwei

    2010-01-01

    This paper describes the real-time digital simulation platform that can be used for power system operation, analysis, and power system modeling. This particular platform gives grid operators, planners and researchers the opportunity to observe how a power system behaves and can be used...... in real time. Various phenomena commonly encountered when dealing with the two-area system is studied. Despite its small size, it mimics very closely the behavior of typical systems in actual operation. The electromagnetic transient type of simulation made in RSCAD enables the study of fast and detailed...... to demonstrate modeling, system disturbances of various types, and proper recovery actions, as well as to illustrate complex power system concepts. The Kundur power system consists of two fully symmetrical areas linked together by two 230kV lines is modeled by using RSCAD in order to carry out simulations...

  19. Embedded Linux platform for data acquisition systems

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Jigneshkumar J., E-mail: jjp@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Reddy, Nagaraj, E-mail: nagaraj.reddy@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India); Kumari, Praveena, E-mail: praveena@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Rajpal, Rachana, E-mail: rachana@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Pujara, Harshad, E-mail: pujara@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Jha, R., E-mail: rjha@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Kalappurakkal, Praveen, E-mail: praveen.k@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India)

    2014-05-15

    Highlights: • The design and the development of data acquisition system on FPGA based reconfigurable hardware platform. • Embedded Linux configuration and compilation for FPGA based systems. • Hardware logic IP core and its Linux device driver development for the external peripheral to interface it with the FPGA based system. - Abstract: This scalable hardware–software system is designed and developed to explore the emerging open standards for data acquisition requirement of Tokamak experiments. To address the future need for a scalable data acquisition and control system for fusion experiments, we have explored the capability of software platform using Open Source Embedded Linux Operating System on a programmable hardware platform such as FPGA. The idea was to identify the platform which can be customizable, flexible and scalable to support the data acquisition system requirements. To do this, we have selected FPGA based reconfigurable and scalable hardware platform to design the system with Embedded Linux based operating system for flexibility in software development and Gigabit Ethernet interface for high speed data transactions. The proposed hardware–software platform using FPGA and Embedded Linux OS offers a single chip solution with processor, peripherals such ADC interface controller, Gigabit Ethernet controller, memory controller amongst other peripherals. The Embedded Linux platform for data acquisition is implemented and tested on a Virtex-5 FXT FPGA ML507 which has PowerPC 440 (PPC440) [2] hard block on FPGA. For this work, we have used the Linux Kernel version 2.6.34 with BSP support for the ML507 platform. It is downloaded from the Xilinx [1] GIT server. Cross-compiler tool chain is created using the Buildroot scripts. The Linux Kernel and Root File System are configured and compiled using the cross-tools to support the hardware platform. The Analog to Digital Converter (ADC) IO module is designed and interfaced with the ML507 through Xilinx

  20. Venus Atmospheric Maneuverable Platform (VAMP) — Stowage/Deployment Concepts and Materials Investigation

    Science.gov (United States)

    Bolisay, L. B.; Barnes, N. C.; Sokol, D. H.; Lee, G. J.; Polidan, R. S.

    2014-06-01

    This presentation discusses the continued development of the Northrop Grumman/L'GARDE team's long-lived, maneuverable platform to explore the Venus upper atmosphere. It focuses on vehicle stowage and deployment concepts, and materials investigation.

  1. Morphware - Fremtidens Embedded System Platform

    DEFF Research Database (Denmark)

    Madsen, Jan

    2006-01-01

    FPGA'er bliver i stigende grad brugt som komponenter i embedded systemer. Faldende priser, større kapacitet og en større felksibilitet har gjort FPGA'en til en attraktiv og konkurrencedygtig teknologi der tillader en stadig stigende grad af system integration, hvor traditionel hardware og software...

  2. Communication System for CIMS Application Integration Platform

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    CIMS has seen the growth of multiple incompatible hardware architectur es, each architecture supporting several incompatible operating systems, and eac h platform operating with various incompatible development tools (e.g., programm ing language compilers, DBMS, etc.) and one or more incompatible graphic user in terfaces. Also, the growth of the Internet, the World-Wide Web, has introduced new dimensio ns of complexity into the development process. All of these must be dealt with a s the application is made workable in a distributed client-server environment. This paper outlines the architecture of a communication system for the CIMS appl ication integration platform. The communication system makes possible the reque st for service across heterogeneous platforms and networks, and provides some co mmon solutions to issues common to CIMS applications.

  3. Venus Atmospheric Maneuverable Platform (VAMP) Science Vehicle Concept

    Science.gov (United States)

    Lee, G.; Polidan, R.; Sokol, D.; Bolisay, L.; Barnes, N.

    2015-04-01

    We will update the VAMP design and discuss plans for future trade studies, analyses, and prototyping to advance the concept and we will discuss how VAMP will enable opportunities for novel long duration scientific studies of the Venus atmosphere.

  4. Tethered elevator and platforms as space station facilities: Systems studies and demonstrative experiments

    Science.gov (United States)

    1986-01-01

    Several key concepts of the science and applications tethered platforms were studied. Some conclusions reached are herein listed. Tether elevator and platform could improve the space station scientific and applicative capabilities. The space elevator presents unique characteristics as microgravity facility and as a tethered platform servicing vehicle. Pointing platforms could represent a new kind of observation facility for large class of payloads. The dynamical, control and technological complexity of these concepts advised demonstrative experiments. The on-going tethered satellite system offers the opportunity to perform such experiments. And feasibility studies are in progress.

  5. Software for systems biology: from tools to integrated platforms.

    Science.gov (United States)

    Ghosh, Samik; Matsuoka, Yukiko; Asai, Yoshiyuki; Hsin, Kun-Yi; Kitano, Hiroaki

    2011-11-03

    Understanding complex biological systems requires extensive support from software tools. Such tools are needed at each step of a systems biology computational workflow, which typically consists of data handling, network inference, deep curation, dynamical simulation and model analysis. In addition, there are now efforts to develop integrated software platforms, so that tools that are used at different stages of the workflow and by different researchers can easily be used together. This Review describes the types of software tools that are required at different stages of systems biology research and the current options that are available for systems biology researchers. We also discuss the challenges and prospects for modelling the effects of genetic changes on physiology and the concept of an integrated platform.

  6. Multipurpose Platform for Electronic Currency System

    Directory of Open Access Journals (Sweden)

    Andreea Magdalena Dae

    2014-12-01

    Full Text Available Nowadays, there are multiple solutions for exchanging electronic currencies which will most probably replace physical money. This paper presents a platform for electronic currency system implemented within a Java smart card for accessing different types of products or services. The user interacts with an “electronic currency bank” and with a merchant through a secure protocol.

  7. Platform Architecture for Decentralized Positioning Systems

    Directory of Open Access Journals (Sweden)

    Zakaria Kasmi

    2017-04-01

    Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

  8. Platform Architecture for Decentralized Positioning Systems.

    Science.gov (United States)

    Kasmi, Zakaria; Norrdine, Abdelmoumen; Blankenbach, Jörg

    2017-04-26

    A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies) and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

  9. Transportation System Concept of Operations

    Energy Technology Data Exchange (ETDEWEB)

    N. Slater-Thompson

    2006-08-16

    The Nuclear Waste Policy Act of 1982 (NWPA), as amended, authorized the DOE to develop and manage a Federal system for the disposal of SNF and HLW. OCRWM was created to manage acceptance and disposal of SNF and HLW in a manner that protects public health, safety, and the environment; enhances national and energy security; and merits public confidence. This responsibility includes managing the transportation of SNF and HLW from origin sites to the Repository for disposal. The Transportation System Concept of Operations is the core high-level OCRWM document written to describe the Transportation System integrated design and present the vision, mission, and goals for Transportation System operations. By defining the functions, processes, and critical interfaces of this system early in the system development phase, programmatic risks are minimized, system costs are contained, and system operations are better managed, safer, and more secure. This document also facilitates discussions and understanding among parties responsible for the design, development, and operation of the Transportation System. Such understanding is important for the timely development of system requirements and identification of system interfaces. Information provided in the Transportation System Concept of Operations includes: the functions and key components of the Transportation System; system component interactions; flows of information within the system; the general operating sequences; and the internal and external factors affecting transportation operations. The Transportation System Concept of Operations reflects OCRWM's overall waste management system policies and mission objectives, and as such provides a description of the preferred state of system operation. The description of general Transportation System operating functions in the Transportation System Concept of Operations is the first step in the OCRWM systems engineering process, establishing the starting point for the lower

  10. The Concept "System of Philosophy"

    DEFF Research Database (Denmark)

    Catana, Leo

    2005-01-01

    In this article I shall examine and discuss the conceptsystem of philosophy’ as a methodological tool in the history of philosophy. I shall do so in two moves. First I shall analyze the historical origin of the concept in the seventeenth and eighteenth centuries. Thereafter I shall undertake...... a discussion of its methodological weaknesses — a discussion, which is not only relevant to the writing of history of philosophy in the seventeenth and eighteenth centuries, but also to the writing of history of philosophy in our times, where the concept remains an important methodological tool. My first move...

  11. Geostationary orbit Earth science platform concepts for global change monitoring

    Science.gov (United States)

    Farmer, Jeffery T.; Campbell, Thomas G.; Davis, William T.; Garn, Paul A.; King, Charles B.; Jackson, Cheryl C.

    1991-01-01

    Functionality of a geostationary spacecraft to support Earth science regional process research is identified. Most regional process studies require high spatial and temporal resolution. These high temporal resolutions are on the order of 30 minutes and may be achievable with instruments positioned in a geostationary orbit. A complement of typical existing or near term instruments are identified to take advantage of this altitude. This set of instruments is listed, and the requirements these instruments impose on a spacecraft are discussed. A brief description of the geostationary spacecraft concepts which support these instruments is presented.

  12. Concepts and principles of photodynamic therapy as an alternative antifungal discovery platform

    Directory of Open Access Journals (Sweden)

    George eTegos

    2012-04-01

    Full Text Available Opportunistic fungal pathogens may cause superficial or serious invasive infections, especially in immunocompromised and debilitated patients. Invasive mycoses represent an exponentially growing threat for human health due to a combination of slow diagnosis and the existence of relatively few classes of available and effective antifungal drugs. Therefore systemic fungal infections result in high attributable mortality. There is an urgent need to pursue and deploy novel and effective alternative anti-fungal countermeasures. Photodynamic therapy was established as a successful modality for malignancies and age-related macular degeneration but photodynamic inactivation has only recently been intensively investigated as an alternative antimicrobial discovery and development platform. The concept of photodynamic inactivation requires microbial exposure to either exogenous or endogenous photosensitizer molecules, followed by visible light energy, typically wavelengths in the red/near infrared region that cause the excitation of the photosensitizers resulting in the production of singlet oxygen and other reactive oxygen species that react with intracellular components, and consequently produce cell inactivation and death. Anti-fungal photodynamic therapy is an area of increasing interest, as research is advancing i to identify the photochemical and photophysical mechanisms involved in photoinactivation; ii to develop potent and clinically compatible photosensitizers; iii to understand how photoinactivation is affected by key microbial phenotypic elements multidrug resistance and efflux, virulence and pathogenesis determinants, and formation of biofilms; iv to explore novel photosensitizer delivery platforms and v to identify photoinactivation applications beyond the clinical setting such as environmental disinfectants.

  13. Institutional options for rural energy access: Exploring the concept of the multifunctional platform in West Africa

    DEFF Research Database (Denmark)

    Nygaard, Ivan

    2010-01-01

    organisational set-ups and local fuel production have in fact had limited or even adverse effects on the outcome of the multifunctional platform programme, these virtues have proved essential in presenting the concept at the policy level. This analysis of the dilemma between mobilizing funding and implementing...... practical programmes provides an argument for building development aid on existing structures instead of inventing new complicated concepts and approaches.......The concept of the multifunctional platform for rural energy access has increasingly been supported by donors in five West African countries since 1994. While it is often referred to as a highly successful concept, recent reviews and interviews with local stakeholders in Mali and Burkina Faso...

  14. Concept of the Interactive Platform for Real Time Energy Consumption Analysis in the Complex Urban Environment

    Directory of Open Access Journals (Sweden)

    Ales Podgornik

    2015-03-01

    Full Text Available This paper presents a concept of interactive and comprehensive platform based on advanced metering infrastructure for exchanging information on energy consumption and consequently on energy efficiency in urban and industrial environment which can serve as powerful tool for monitoring of progress in transition toward low carbon society. Proposed concept aims at supporting energy utilities in optimizing energy performance of both supply and demand side aspect of their work and have a potential to fill the gap and help in harmonization of interests between the energy utilities, energy service providers, local energy agencies and citizens. The proposed concept should be realized as a platform with the modular architecture, allowing future expansion of user’s portfolio and inventory management (new energy efficiency measures, technologies, different industries, urban districts and regions.

  15. A Software Development Platform for Mechatronic Systems

    DEFF Research Database (Denmark)

    Guan, Wei

    present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...... rigorous construction of systems. The incremental development process separates the development activities into prefabrication of reusable components, conguration and generation of applications using validated components, and elimination of design errors using model-based analysis and verfication methods...

  16. Designs and concept reliance of a fully automated high-content screening platform.

    Science.gov (United States)

    Radu, Constantin; Adrar, Hosna Sana; Alamir, Ab; Hatherley, Ian; Trinh, Trung; Djaballah, Hakim

    2012-10-01

    High-content screening (HCS) is becoming an accepted platform in academic and industry screening labs and does require slightly different logistics for execution. To automate our stand-alone HCS microscopes, namely, an alpha IN Cell Analyzer 3000 (INCA3000), originally a Praelux unit hooked to a Hudson Plate Crane with a maximum capacity of 50 plates per run, and the IN Cell Analyzer 2000 (INCA2000), in which up to 320 plates could be fed per run using the Thermo Fisher Scientific Orbitor, we opted for a 4 m linear track system harboring both microscopes, plate washer, bulk dispensers, and a high-capacity incubator allowing us to perform both live and fixed cell-based assays while accessing both microscopes on deck. Considerations in design were given to the integration of the alpha INCA3000, a new gripper concept to access the onboard nest, and peripheral locations on deck to ensure a self-reliant system capable of achieving higher throughput. The resulting system, referred to as Hestia, has been fully operational since the new year, has an onboard capacity of 504 plates, and harbors the only fully automated alpha INCA3000 unit in the world.

  17. SERS diagnostic platforms, methods and systems microarrays, biosensors and biochips

    Energy Technology Data Exchange (ETDEWEB)

    Vo-Dinh, Tuan (Knoxville, TN)

    2007-09-11

    A Raman integrated sensor system for the detection of targets including biotargets includes at least one sampling platform, at least one receptor probe disposed on the sampling platform, and an integrated circuit detector system communicably connected to the receptor. The sampling platform is preferably a Raman active surface-enhanced scattering (SERS) platform, wherein the Raman sensor is a SERS sensor. The receptors can include at least one protein receptor and at least one nucleic acid receptor.

  18. SERS diagnostic platforms, methods and systems microarrays, biosensors and biochips

    Science.gov (United States)

    Vo-Dinh, Tuan

    2007-09-11

    A Raman integrated sensor system for the detection of targets including biotargets includes at least one sampling platform, at least one receptor probe disposed on the sampling platform, and an integrated circuit detector system communicably connected to the receptor. The sampling platform is preferably a Raman active surface-enhanced scattering (SERS) platform, wherein the Raman sensor is a SERS sensor. The receptors can include at least one protein receptor and at least one nucleic acid receptor.

  19. Hybrid Exploration Agent Platform and Sensor Web System

    Science.gov (United States)

    Stoffel, A. William; VanSteenberg, Michael E.

    2004-01-01

    A sensor web to collect the scientific data needed to further exploration is a major and efficient asset to any exploration effort. This is true not only for lunar and planetary environments, but also for interplanetary and liquid environments. Such a system would also have myriad direct commercial spin-off applications. The Hybrid Exploration Agent Platform and Sensor Web or HEAP-SW like the ANTS concept is a Sensor Web concept. The HEAP-SW is conceptually and practically a very different system. HEAP-SW is applicable to any environment and a huge range of exploration tasks. It is a very robust, low cost, high return, solution to a complex problem. All of the technology for initial development and implementation is currently available. The HEAP Sensor Web or HEAP-SW consists of three major parts, The Hybrid Exploration Agent Platforms or HEAP, the Sensor Web or SW and the immobile Data collection and Uplink units or DU. The HEAP-SW as a whole will refer to any group of mobile agents or robots where each robot is a mobile data collection unit that spends most of its time acting in concert with all other robots, DUs in the web, and the HEAP-SWs overall Command and Control (CC) system. Each DU and robot is, however, capable of acting independently. The three parts of the HEAP-SW system are discussed in this paper. The Goals of the HEAP-SW system are: 1) To maximize the amount of exploration enhancing science data collected; 2) To minimize data loss due to system malfunctions; 3) To minimize or, possibly, eliminate the risk of total system failure; 4) To minimize the size, weight, and power requirements of each HEAP robot; 5) To minimize HEAP-SW system costs. The rest of this paper discusses how these goals are attained.

  20. CompactPCI/Linux Platform in FTU Slow Control System

    Institute of Scientific and Technical Information of China (English)

    F.Iannone; L.Wang; C.Centioli; M.Panella; G.Mazza; V.Vitale

    2004-01-01

    In large fusion experiments, such as tokamak devices, there is a common trend for slow control systems. Because of complexity of the plants, the so-called 'Standard Model' (SM) in slow control has been adopted on several tokamak machines. This model is based on a three-level hierarchical control: 1) High-Level Control (HLC) with a supervisory function; 2) Medium-Level Control (MLC) to interface and concentrate I/O field equipments; 3) Low-Level Control (LLC)with hard real-time I/O function, often managed by PLCs.FTU control system designed with SM concepts has underwent several stages of developments in its fifteen years duration of runs. The latest evolution was inevitable, due to the obsolescence of the MLC CPUs, based on VME-MOTOROLA 68030 with OS9 operating system. A large amount of C code was developed for that platform to route the data flow from LLC, which is constituted by 24 Westinghouse Numalogic PC-700 PLCs with about 8000 field-points, to HLC, based on a commercial Object-Oriented Real-Time database on Alpha/CompaqTru64 platform.Therefore, we have to look for cost-effective solutions and finally a CompactPCI-Intel x86platform with Linux operating system was chosen. A software porting has been done, taking into account the differences between OS9 and Linux operating system in terms of Inter/Network Processes Communications and I/O multi-ports serial driver.This paper describes the hardware/software architecture of the new MLC system, emphasizing the reliability and the low costs of the open source solutions. Moreover, a huge amount of software packages available in open source environment will assure a less painful maintenance, and will open the way to further improvements of the system itself.

  1. EO system concepts in the littoral

    Science.gov (United States)

    Schwering, Piet B. W.; van den Broek, Sebastiaan P.; van Iersel, Miranda

    2007-04-01

    In recent years, operations executed by naval forces have taken place at many different locations. At present, operations against international terrorism and asymmetric warfare in coastal environments are of major concern. In these scenarios, the threat caused by pirates on-board of small surface targets, such as jetskis and fast inshore attack crafts, is increasing. In the littoral environment, the understanding of its complexity and the efficient use of the limited reaction time, are essential for successful operations. Present-day electro-optical sensor suites, also incorporating Infrared Search and Track systems, can be used for varying tasks as detection, classification and identification. By means of passive electro-optical systems, infrared and visible light sensors, improved situational awareness can be achieved. For long range capability, elevated sensor masts and flying platforms are ideally suited for the surveillance task and improve situational awareness. A primary issue is how to incorporate new electro-optical technology and signal processing into the new sensor concepts, to improve system performance. It is essential to derive accurate information from the high spatial-resolution imagery created by the EO sensors. As electro-optical sensors do not have all-weather capability, the performance degradation in adverse scenarios must be understood, in order to support the operational use of adaptive sensor management techniques. In this paper we discuss the approach taken at TNO in the design and assessment of system concepts for future IRST development. An overview of our maritime programme in future IRST and EO system concepts including signal processing is presented.

  2. LBS Mobile Learning System Based on Android Platform

    Directory of Open Access Journals (Sweden)

    Zhang Ya-Li

    2017-01-01

    Full Text Available In the era of mobile internet, PC-end internet services can no long satisfy people’s demands, needs for App and services on mobile phones are more urgent than ever. With increasing social competition, the concept of lifelong learning becomes more and more popular and accepted, making full use of spare time to learn at any time and any place meets updating knowledge desires of modern people, Location Based System (LBS mobile learning system based on Android platform was created under such background. In this Paper, characteristics of mobile location technology and intelligent terminal were introduced and analyzed, mobile learning system which will fulfill personalized needs of mobile learners was designed and developed on basis of location information, mobile learning can be greatly promoted and new research ideas can be expanded for mobile learning.

  3. RLV Hopper: consolidated system concept

    Energy Technology Data Exchange (ETDEWEB)

    Spies, Johann [Astrium - Space Infrastructure, Bremen (Germany)

    2003-11-01

    The Hopper, a concept for a reusable launch system was developed and found attractive in the frame of FESTIP, ESA's Future European Space Transportation Initiation Programme. Later, in the national German ASTRA programme this concept was adapted to newly emerged requirement and subjected to a detailed design loop. Taking off horizontally and staging at high sub-orbital velocity, the Hopper needs a rail-guided launch sled, downrange landing, re-transportation back to the launch site, and one, but only one upper stage. Horizontal take-off is used to improve safety and to reduce thrust requirement, and number, mass, and cost of main engines, and also problems with vehicle centering. Transporting of the cargo (e.g. payload and expendable upper stage) in the RLV results in only one aerodynamically affected flight configuration. Staging at high sub-orbital velocity above the sensible atmosphere enables the use of only one standardised upper stage for all missions. Using a cryogenic upper stage the Hopper system is nearly optimally staged for the dimensioning GTO mission. The paper describes the consolidated unmanned RLV concept and highlights areas of special interest, evolution potential, and further steps. (Author)

  4. System integrational and migrational concepts and methods within healthcare

    DEFF Research Database (Denmark)

    Endsleff, F; Loubjerg, P

    1997-01-01

    In this paper an overview and comparison of the basic concepts and methods behind different system integrational implementations is given, including the DHE, which is based on the coming Healthcare Information Systems Architecture pre-standard HISA, developed by CEN TC251. This standard and the DHE...... (Distributed Healthcare Environment) not only provides highly relevant standards, but also provides an efficient and well structured platform for Healthcare IT Systems....

  5. Concept and System of Personification Control System

    Institute of Scientific and Technical Information of China (English)

    Bai,Fengshuang; Yin,Yixin; Tu,Xuyan; Zhang,Ying

    2006-01-01

    This paper provides the system and conception of the Personification Control System (PCS) on the basis of Intelligent Control System based on Artificial life (ICS/AL), Artificial Emotion, Humanoid Control, and Intelligent Control System based on Field bus. According to system science and deciding of organize of biology, the Pyramid System of PCS are created. Then Pyramid System of PCS which is made up of PCS1/H, PCS1/S, PCS1/O, PCS1/C and PCS1/G is described.

  6. An Orbiting Standards Platform for communication satellite system RF measurements

    Science.gov (United States)

    Wallace, R. G.; Woodruff, J. J.

    1978-01-01

    The Orbiting Standards Platform (OSP) is a proposed satellite dedicated to performing RF measurements on space communications systems. It would consist of a quasi-geostationary spacecraft containing an ensemble of calibrated RF sources and field strength meters operating in several microwave bands, and would be capable of accurately and conveniently measuring critical earth station and satellite RF performance parameters, such as EIRP, gain, figure of merit (G/T), crosspolarization, beamwidth, and sidelobe levels. The feasibility and utility of the OSP concept has been under joint study by NASA, NBS, Comsat and NTIA. A survey of potential OSP users was conducted by NTIA as part of this effort. The response to this survey, along with certain trends in satellite communications system design, indicates a growing need for such a measurement service.

  7. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  8. Routing problems based on hils system platform

    Directory of Open Access Journals (Sweden)

    Andrzej Adamski

    2015-03-01

    Full Text Available Background: The logistic systems are very complex socio-technical systems. In this paper the proposal of application of the hierarchical multi-layers system platform HILS approach for the solution of the complex vehicle routing problems is presented. The interactive system functional structure was proposed which by intelligent dedicated inter-layers interactions enables the professional solutions of these practical problems. To illustrate these capabilities the complex example of the real-time VRP-SPD-TW routing problem was presented in which upper layers offers the context-related real-time updating network specifications that stimulates the adequate routing parameters and specifications updating for problem solution in optimization layer. At the bottom dispatching control layer the DISCON (Dispatching CONtrol method from public transport was adopted to logistics applications in which the actual routing is treated as obligatory reference schedule to be stabilized. The intelligence aspects are related among others to HILS based decomposition, context-related trade-offs between routing modifications and corrective dispatching control capabilities e.g. priority or route guidance actions. Methods: Decomposition of the vehicle routing problem for the HILS layers tasks creating the ILS system hierarchical structure. Dedicated solution method for the VRP-SPD-TW routing problem. The recognition of the control preferences structure by AHP-Entropy methods. DISCON and PIACON multi-criteria interacting control methods. Results: Original formulation and solution of the vehicle routing problem by system-wide approach with essential practical advantages: consistency, lack of redundancy, essential reduction of dimension, dedicated formulation, multi-criteria approach, exploration of the integration and intelligence features supported by the intelligent PIACON-DISCON methods control activities Conclusions: The presented proposal creates the professional

  9. Radioisotope Power System Pool Concept

    Science.gov (United States)

    Rusick, Jeffrey J.; Bolotin, Gary S.

    2015-01-01

    Advanced Radioisotope Power Systems (RPS) for NASA deep space science missions have historically used static thermoelectric-based designs because they are highly reliable, and their radioisotope heat sources can be passively cooled throughout the mission life cycle. Recently, a significant effort to develop a dynamic RPS, the Advanced Stirling Radioisotope Generator (ASRG), was conducted by NASA and the Department of Energy, because Stirling based designs offer energy conversion efficiencies four times higher than heritage thermoelectric designs; and the efficiency would proportionately reduce the amount of radioisotope fuel needed for the same power output. However, the long term reliability of a Stirling based design is a concern compared to thermoelectric designs, because for certain Stirling system architectures the radioisotope heat sources must be actively cooled via the dynamic operation of Stirling converters throughout the mission life cycle. To address this reliability concern, a new dynamic Stirling cycle RPS architecture is proposed called the RPS Pool Concept.

  10. A Real-Time Simulation Platform for Power System Operation

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Østergaard, Jacob; Wu, Qiuwei

    2010-01-01

    This paper describes the real-time digital simulation platform that can be used for power system operation, analysis, and power system modeling. This particular platform gives grid operators, planners and researchers the opportunity to observe how a power system behaves and can be used...

  11. Execution platform modeling for system-level architecture performance analysis

    NARCIS (Netherlands)

    Živković, Vladimir Dobrosav

    2008-01-01

    Today's embedded systems are designed for more complex and more computationally-intensive applications than they were a decade ago. Most if not every embedded system designed today is a sort of parallel computing system - only called differently - a platform. A platform is essentially a heterogeneo

  12. Systems and software variability management concepts, tools and experiences

    CERN Document Server

    Capilla, Rafael; Kang, Kyo-Chul

    2013-01-01

    The success of product line engineering techniques in the last 15 years has popularized the use of software variability as a key modeling approach for describing the commonality and variability of systems at all stages of the software lifecycle. Software product lines enable a family of products to share a common core platform, while allowing for product specific functionality being built on top of the platform. Many companies have exploited the concept of software product lines to increase the resources that focus on highly differentiating functionality and thus improve their competitiveness

  13. Simulation platform of navigation system for autonomous underwater vehicle

    Institute of Scientific and Technical Information of China (English)

    QIN Zheng; BIAN Xin-qian

    2006-01-01

    In view of the characteristics of underwater navigation, the simulation platform of navigation system for autonomous underwater vehicle has been developed based on Windows platform. The system architecture, net communication and the information flow are discussed. The methods of software realization and some key techniques of the Vehicle Computer and the Navigation Equipment Computer are introduced in particular. The software design of Terrain Matching Computer is introduced also. The simulation platform is verified and analyzed through simulation. The results show that the architecture of the platform is reasonable and reliable, and the mathematic models and simulation algorithms of sub-systems are also valid and practicable.

  14. Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

    Directory of Open Access Journals (Sweden)

    Bor-Sen Chen

    2013-10-01

    Full Text Available Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering.

  15. Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

    Science.gov (United States)

    Chen, Bor-Sen; Wu, Chia-Chou

    2013-01-01

    Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i) system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii) system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii) system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv) systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering. PMID:24709875

  16. Systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering.

    Science.gov (United States)

    Chen, Bor-Sen; Wu, Chia-Chou

    2013-10-11

    Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i) system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii) system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii) system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv) systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering.

  17. Types and concept analysis for legacy systems

    NARCIS (Netherlands)

    Kuipers, T.; Moonen, L.M.F.

    2000-01-01

    We combine type inference and concept analysis in order to gain insight into legacy software systems. Type inference for Cobol yields the types for variables and program parameters. These types are used to perform mathematical concept analysis on legacy systems. We have developed ConceptRefinery, a

  18. Cooperative Multi-Agent Mobile Sensor Platforms for Jet Engine Inspection: Concept and Implementation

    Science.gov (United States)

    Litt, Jonathan S.; Wong, Edmond; Krasowski, Michael J.; Greer, Lawrence C.

    2003-01-01

    Cooperative behavior algorithms utilizing swarm intelligence are being developed for mobile sensor platforms to inspect jet engines on-wing. Experiments are planned in which several relatively simple autonomous platforms will work together in a coordinated fashion to carry out complex maintenance-type tasks within the constrained working environment modeled on the interior of a turbofan engine. The algorithms will emphasize distribution of the tasks among multiple units; they will be scalable and flexible so that units may be added in the future; and will be designed to operate on an individual unit level to produce the desired global effect. This proof of concept demonstration will validate the algorithms and provide justification for further miniaturization and specialization of the hardware toward the true application of on-wing in situ turbine engine maintenance.

  19. A Method for Analyzing System Reliability of Existing Jacket Platforms

    Institute of Scientific and Technical Information of China (English)

    HE Yong; GONG Shun-feng; JIN Wei-liang

    2008-01-01

    Owing to the ageing of the existing structures worldwide and the lack of codes for the continued safety management of structures during their lifetime, it is very necessary to develop a tool to evaluate their system reliability over a time interval. In this paper, a method is proposed to analyze system reliability of existing jacket platforms. The influences of dint, crack and corrosion are considered. The mechanics characteristics of the existing jacket platforms to extreme loads are analyzed by use of the nonlinear mechanical analysis. The nonlinear interaction of pile-soil-structure is taken into consideration in the analysis. By use of FEM method and Monte Carlo simulation, the system reliability of the existing jacket platform can be obtained. The method has been illustrated through application to BZ28-1 three jacket platforms which have operated for sixteen years. Advantages of the proposed method for analyzing the system reliability of the existing jacket platform is also highlighted.

  20. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...... indisputable. This paper presents state-of-the-art literature on platform research related to production platforms and investigates gaps in the literature. The paper concludes on findings by proposing future research directions....

  1. PR-PR: cross-platform laboratory automation system.

    Science.gov (United States)

    Linshiz, Gregory; Stawski, Nina; Goyal, Garima; Bi, Changhao; Poust, Sean; Sharma, Monica; Mutalik, Vivek; Keasling, Jay D; Hillson, Nathan J

    2014-08-15

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  2. PR-PR: Cross-Platform Laboratory Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Linshiz, G; Stawski, N; Goyal, G; Bi, CH; Poust, S; Sharma, M; Mutalik, V; Keasling, JD; Hillson, NJ

    2014-08-01

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  3. Concept Evaluation for Hydraulic Yaw System

    DEFF Research Database (Denmark)

    Stubkier, Søren; Pedersen, Henrik C.; Andersen, Torben Ole

    2013-01-01

    a suspension system on a car, leading the loads away from the turbine structure. However, to realize a soft hydraulic yaw system a new design concept must be found. As a part of the development of the new concept a preliminary concept evaluation has been conducted, evaluating seven different hydraulic yaw...... concepts, ranging from a one-to-one copy of the electrical drive (electrical drives replaced by hydraulic dittos), to floating suspension systems mounted on hydraulic cylinders. Rough calculations of size and consequences of the different systems are presented ending up with the final concept for further...... investigation. Loads and yaw demands are based on the IEC 61400-1 standard for wind turbine design, and the loads for this examination are extrapolated from the HAWC2 aeroelastic design code. The concepts are based on a 5 MW off-shore turbine....

  4. Concept and design of a UAS-based platform for measurements of RF signal-in-space

    Science.gov (United States)

    Schrader, Thorsten; Bredemeyer, Jochen; Mihalachi, Marius; Rohde, Jan; Kleine-Ostmann, Thomas

    2016-09-01

    Field strength or signal-in-space (SIS) measurements have been performed by using manned helicopters, aircrafts or from ground level using extendable masts. With the availability of unmanned aerial systems (UAS) such as multicopters a new versatile platform for SIS measurements is deployable. Larger types show up to eight individually driven electric motors and controllers (therefore called octocopter). They provide the ability to fly along predefined traces, to hover at waypoints and to initiate other actions when those have been reached. They provide self-levelling and stabilisation and moreover, they may gear at a point of interest regardless of their actual position, e.g. during their flight around a tower. Their payload mainly depends on the platform size and allows integration of complex measurement equipment. Upgrading their navigation capabilities including state-of-the-art global navigation satellite system (GNSS) and ground station transmitter (real-time kinematic - RTK) enables precise localisation of the UAS. For operation in electromagnetic harsh environments a shielding can be considered and integrated into the concept. This paper describes concept and design of an octocopter and its instrumentation, along with applications in recent projects, in which we measure and validate terrestrial navigation systems applied in air traffic and the weather forecast services. Among those are instrumentation landing systems (ILS), VHF omnidirectional radio ranges (VOR), airport traffic and weather radars as well as military surveillance radars, and UHF wind profilers. Especially to investigate the possible interaction of VORs and radars with single wind turbines (WT) or wind power plants has become a major request of economy, military and politics. Here, UAS can be deployed to deliver measurement data investigating this interaction. Once developed and setup to a certain extent, UAS are easy and cost-efficient to operate. Nonetheless, due to their compact size, UAS

  5. A web-based platform for mobile learning management system ...

    African Journals Online (AJOL)

    A web-based platform for mobile learning management system. ... Journal of Computer Science and Its Application ... the mobile devices, the mobile applications used to access the internet and also context discovery and content delivery.

  6. Photovoltaic System Test Platform with Integrated Battery Energy Storage Emulator

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Sera, Dezso; Stroe, Daniel-Ioan

    2017-01-01

    In this work, we present a hybrid simulation and a real-time test platform for developing control systems for photovoltaic (PV) inverters with integrated battery energy storage (BES). The platform consists of a dual-stage single-phase PV inverter system, DC coupled with a full-bridge grid connected...... inverter, which emulates the charge regulator and battery bank. The real-time control of the two power electronic converters is implemented in a Simulink/dSpace platform, together with the real-time simulation model of the battery pack, whereas the PV array input can be connected to a PV emulator...... or directly to a physical PV array. The platform enables real-time testing of PV+BES control systems, including battery (BMS) and energy management systems (EMS), for a variety of battery technologies, which can be modelled in detail and emulated by the full-bridge grid connected inverter. Such flexibility...

  7. Threshold Concepts, Systems and Learning for Sustainability

    Science.gov (United States)

    Sandri, Orana Jade

    2013-01-01

    This paper presents a framework for understanding the role that systems theory might play in education for sustainability (EfS). It offers a sketch and critique of Land and Meyer's notion of a "threshold concept", to argue that seeing systems as a threshold concept for sustainability is useful for understanding the processes of…

  8. Modeling and Fuzzy Logic Control of an Active Reaction Compensating Platform System

    Directory of Open Access Journals (Sweden)

    Y.J. Lin

    1995-01-01

    Full Text Available This article presents the application of the fuzzy logic (FL concept to the active control of a multiple degree of freedom reaction compensating platform system that is designed and used for isolating vibratory disturbances of space-based devices. The physical model used is a scaled down two-plate platform system. In this work, simulation is performed and presented. According to the desired performance specifications, a full range of investigation regarding the development of an FL stabilization controller for the system is conducted. Specifically, the study includes four stages: comprehensive dynamic modeling of the reaction compensating system; analysis of the dynamic responses of the platform system when it is subjected to various disturbances; design of an FL controller capable of filtering the vibratory disturbances transmitted to the bottom plate of the platform system; performance evaluation of the developed FL controller through computer simulations. To simplify the simulation work, the system model is linearized and the system component parameter variations are not considered. The performance of the FL controller is tested by exciting the system with an impulsive force applied at an arbitrarily chosen point on the top plate. It is shown that the proposed FL controller is robust in that the resultant active system is well stabilized when subjected to a random external disturbance. The comparative study of the performances of the FL controlled active reaction and passive reaction compensating systems also reveals that the FL controlled system achieves significant improvements in reducing vibratory accelerations over passive systems.

  9. A SUSTAINABLE PLATFORM FOR E-SERVICE SYSTEM DESIGN

    Institute of Scientific and Technical Information of China (English)

    Guohua BAI

    2004-01-01

    By integrating system thinking and social psychology, this paper presents an Activity System Theory (AST)1 approach to the platform design of e-service systems in general, and e-healthcare systems in specific. In the first part, some important principles of AST and a sustainable model of Healthcare (IMIS)' is presented to demonstrate how to construct a comprehensive platform for various complex e-service systems based on the sustainable model of AST. Our research focused on the complex e-healthcare system in Sweden, and the results showed that the model of AST can provide the designers of e-service system with a comprehensive and sustainable platform for designing various kinds of e-service systems.

  10. Solar Rocket System Concept Analysis

    Science.gov (United States)

    1979-12-01

    seconds. A stage mass fraction of 0.80 was used to pre- pare this curve. More precise mass fractions were computed and are discussed in Section 8.0...as heliostat mirrors, are thereby avoided. Additional versions of the selected collector/vehicle concept are shown in Section 7.0, Spacecraft Design...plane de-orbit operations would be approximately 7000 fps. Precision orbit maintenance or special orbit positioning missions can be performed by the

  11. VOLTTRON: An Agent Execution Platform for the Electric Power System

    Energy Technology Data Exchange (ETDEWEB)

    Akyol, Bora A.; Haack, Jereme N.; Ciraci, Selim; Carpenter, Brandon J.; Vlachopoulou, Maria; Tews, Cody W.

    2012-06-05

    Volttron is an agent execution platform that is engineered for use in the electric power system. Volttron provides resource guarantees for agents and the platform including memory and processor utilization; authentication and authorization services; directory services for agent and resource location; and agent mobility. Unlike most other agent platforms, Volttron does not depend on a single agent authoring language. Instead, we chose to design and implement Volttron as a platform service and framework that is decoupled from the agent execution environment. A prototype implementation of Volttron has been written in Python (using Python v2.7.2) and we have executed agents written in Python and Java and as shell scripts. The intended use of Volttron is in the power distribution system for managing distributed generation, demand-response, and plug-in electric vehicles.

  12. Concept Evaluation for Hydraulic Yaw System

    DEFF Research Database (Denmark)

    Stubkier, Søren; Pedersen, Henrik C.; Andersen, Torben Ole

    2013-01-01

    a suspension system on a car, leading the loads away from the turbine structure. However, to realize a soft hydraulic yaw system a new design concept must be found. As a part of the development of the new concept a preliminary concept evaluation has been conducted, evaluating seven different hydraulic yaw......The yaw system is the subsystem on a wind turbine which ensures that the rotor plane of the turbine always is facing the wind direction. Studies from [1] show that a soft yaw system may be utilized to dampen the loads in the wind turbine structure. The soft yaw system operates much like...... investigation. Loads and yaw demands are based on the IEC 61400-1 standard for wind turbine design, and the loads for this examination are extrapolated from the HAWC2 aeroelastic design code. The concepts are based on a 5 MW off-shore turbine....

  13. Systems design and comparative analysis of large antenna concepts

    Science.gov (United States)

    Garrett, L. B.; Ferebee, M. J., Jr.

    1983-01-01

    Conceptual designs are evaluated and comparative analyses conducted for several large antenna spacecraft for Land Mobile Satellite System (LMSS) communications missions. Structural configurations include trusses, hoop and column and radial rib. The study was conducted using the Interactive Design and Evaluation of Advanced Spacecraft (IDEAS) system. The current capabilities, development status, and near-term plans for the IDEAS system are reviewed. Overall capabilities are highlighted. IDEAS is an integrated system of computer-aided design and analysis software used to rapidly evaluate system concepts and technology needs for future advanced spacecraft such as large antennas, platforms, and space stations. The system was developed at Langley to meet a need for rapid, cost-effective, labor-saving approaches to the design and analysis of numerous missions and total spacecraft system options under consideration. IDEAS consists of about 40 technical modules efficient executive, data-base and file management software, and interactive graphics display capabilities.

  14. Design for Quick Evaluating Platform of Servo System Status

    Institute of Scientific and Technical Information of China (English)

    SHEN Huai-rong; NIU Ya-feng

    2006-01-01

    At present, the composite application platforms are seldom developed which can quickly evaluate the status and detect the faults of the major weapon equipment. According to the circumstances, the electro-hydraulic servo system is investigated, which is the very important component of the control system in the launch vehicle or missile. A quickly status evaluating technology for complex large equipment is researched. A composite application platform framework for the fault diagnosis and status evaluation of theservo system is devised. The result of the research can be extended to the application for other complex large equipment.

  15. Developing Sustainable Life Support System Concepts

    Science.gov (United States)

    Thomas, Evan A.

    2010-01-01

    Sustainable spacecraft life support concepts may allow the development of more reliable technologies for long duration space missions. Currently, life support technologies at different levels of development are not well evaluated against each other, and evaluation methods do not account for long term reliability and sustainability of the hardware. This paper presents point-of-departure sustainability evaluation criteria for life support systems, that may allow more robust technology development, testing and comparison. An example sustainable water recovery system concept is presented.

  16. Flexible logistic concepts for assembly systems

    Directory of Open Access Journals (Sweden)

    2010-06-01

    Full Text Available Logistics is a crucial issue for small and medium sized enterprises (SME. This paper deals with logistical concepts for assembly systems. The IPH is currently conducting a project with the aim of developing a method to combine allocation and delivery concepts for assembly systems to increase the logistical efficiency of SME. Via this method SME are able to adapt quickly to changing market environments.

  17. Shared Platform for South African Earth and Environmental Observation Systems: Recent Developments and Improvements

    Science.gov (United States)

    Hugo, Wim

    2013-04-01

    Over the past 3 years, SAEON has worked with a number of stakeholders and funders to establish a shared platform for the management of dissemination of E&EO research outputs, data sets, and services. This platform is strongly aligned with GEO principles and architecture, allowing direct integration with the GEOSS Broker. The platform has two important characteristics: 1. It reduces the cost and lead time of provision of similar infrastructure for future initiatives. 2. The platform is domain-agnostic to some degree, and can be used for non E&EO applications. Projects to achive this is under way at present. The paper describes the application of the platform for a variety of user communities and initiatives (SAEON Data Portal, South African Earth Observation System, Risk and Vulnerability Atlas, BioEnergy Atlas, National Spatial Information Framework, ICSU World Data System Components, and many more), and demonstrates use cases utilising a distributed, service oriented architecture. Significant improvements have been made to the interoperability functions available to end users and content providers, and these are demonstrated and discussed in detail. Functions include • Creation and persistence of composite maps, as well as time series or scatter charts, supporting a variety of standardized data sources. • Search facilities have been extended to allow analysis and filtering of primary search results, and to deal with large meta-data collections. • In addition, data sources, data listings, news items, images, search results, and other platform content can, with increasing flexibility, be accessed as standardized services that are processed in standardized clients, allowing creation of a rich user interface, and permitting the inclusion of platform functionality into external websites and resources. This shift to explicit service-oriented, peer-to-peer architecture is a preparation for increased distributed processing and content composition, and will support

  18. Which recommender system can best fit social learning platforms?

    NARCIS (Netherlands)

    Fazeli, Soude; Loni, Babak; Drachsler, Hendrik; Sloep, Peter

    2014-01-01

    In this presentation, we present a study that aims to develop a recommender system for social learning platforms that combine traditional learning management systems with commercial social networks like Facebook. We therefore take into account social interactions of users to make recommendations on

  19. Which Recommender System Can Best Fit Social Learning Platforms?

    NARCIS (Netherlands)

    Fazeli, Soude; Loni, Babak; Drachsler, Hendrik; Sloep, Peter

    2014-01-01

    This study aims to develop a recommender system for social learning platforms that combine traditional learning management systems with commercial social networks like Facebook. We therefore take into account social interactions of users to make recommendations on learning resources. We propose to m

  20. Second interim briefing (D3). Evolutionary Science and Applications Space Platform. Characterization of concepts, tasks A and B

    Science.gov (United States)

    1981-01-01

    The objectives were to define, evaluate, and select concepts for evolving a space station in conjunction with the Space Platform for NASA science, Applications, Technology and DOD; and a permanently manned presence in space early, with a maximum of existing technology.

  1. Hanzix and Chinese Open System Platform

    Institute of Scientific and Technical Information of China (English)

    孙玉方

    1997-01-01

    International use of the UNIX system in recent years provokes a need to expand its functionality.Extensions are needed to process data in various languages as the market requirement dictate[1,2].With the advent of open systems and interfaces.the method of internationalization(I18N)has become standardized.Hanzix Association was founded by the Institute of Software,The Chinese Academy of Sciences(ISAS,Beijing),Institute of Information Industry ( Ⅲ,Taipei)and Chinese University of Hong Kong(CUHK,Hong Kong),and its aim is to promote an open system standard for Chinese character(Hanzi)processing.This paper presents Hanzix,an open system environment to support Hanzi processing,including enhancement recommended for Hanzi API,input method mechanism codeset conversion and announcement,and reviews the current work.

  2. An integrated platform for inertial navigation systems

    Science.gov (United States)

    Dumitrascu, Ana; Tamas, Razvan D.; Caruntu, George; Bobirca, Daniel

    2015-02-01

    In this paper we propose a new configuration for an inertial navigation system (INS), type strap down, designed to be used onboard a ship. The system consists of an inertial navigation unit (IMU), using a 9-axis inertial sensor and pressure and temperature sensors, a GPS module, various interfaces for optimal communication and command, a microcontroller for data processing and computing and a power supply.

  3. Navigation system for neurosurgery with PC platform.

    Science.gov (United States)

    Akatsuka, Y; Shibasaki, T; Saito, A; Kosaka, A; Matsuzaki, H; Asano, T; Furuhashi, Y

    2000-01-01

    This paper presents a navigation system for a surgical microscope and an endoscope which can be used for neurosurgery. In this system, a wireframe model of a target tumor and other significant anatomical landmarks are superimposed in real-time onto live video images taken from the microscope and the endoscope. The wireframe model is generated from a CT/MRI slice images. Overlaid images are simultaneously displayed in the same monitor using the picture-in-picture function so that the surgeon can concentrate on the single monitor during the surgery. The system measures the position and orientation of the patient using specially designed non-contact sensing devices mounted on the microscope and the endoscope. Based on this real-time measurement, the system displays other useful information about the navigation as well as the rendered wireframe. The accuracy of registration between the wireframe model and the actual live view is less than 2 mm. We tested this system in actual surgery several times, and verified its performance and effectiveness.

  4. A new evaluation platform for Navigation systems

    DEFF Research Database (Denmark)

    Sejerøe, Thomas Hanefeld; Poulsen, Niels Kjølstad; Ravn, Ole

    2005-01-01

    The KALMTOOL 2 toolbox is a set of MATLAB tools for state estimation for nonlinear systems. The toolbox contains functions for extended Kalman filtering as well as for two new filters called the DD1 filter and the DD2 filter. It also contains function for Uncented Kalman filters as well as three...

  5. Isomer Energy System Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, D

    2003-09-01

    Isomer energy supplies offer the potential to increase the output power over time to accommodate varying power needs. Other materials with similar energy density (for example isotopic energy sources such as {sup 238}Pu) do not offer the potential to increase power with time. Often the design life of an energy source is significant when compared to the half-life of the isotope. As a result, the conventional isotopic energy supplies operate with significant excess power at start of life to meet the power needs at end-of-life. For example a {sup 238}Pu radioisotope energy supply with a 35-year design life must account for radioactive decay losses of about 25% of the plutonium present at the start of life. This decay loss is significant if the required output power from the device is constant with time. If the required power output from the device increases with time (such as some space applications), significant increases in power supply weight are required to meet design power requirements. Isomer energy supplies offer the potential to increase the output power over time to meet varying power needs, thereby offering a significant advantage over conventional systems. Isomer energy supplies also offer the possibility of being ''turned on'' based on need at a specific time. These characteristics offer distinct advantages to isomer energy supplies. This report examines the basic engineering characteristics of a hypothetical isomer energy supply in order to gain insight into properties of isomers that will make them potentially useful as energy sources in engineered systems. These isomer properties provide a basis for identification of candidate isomers and provide a basis for an isomer search.

  6. Smart grids concept in electrical distribution system

    Directory of Open Access Journals (Sweden)

    Popović Željko N.

    2012-01-01

    Full Text Available This paper defines key business processes in electrical distribution systems and key elements and priority components that should be (redefined in these processes in order to enable the goals of smart grids concept to be fulfilled in the cost effective way. Activities undertaken in the Power Distribution Company of “Elektrovojvodina” (Serbia, which provide the basis for fulfilling the Smart Grids goals and thus enable full implementation of smart grids concept are presented in details.

  7. Nephrogenic systemic fibrosis: Current concepts

    Directory of Open Access Journals (Sweden)

    Prasanta Basak

    2011-01-01

    Full Text Available Nephrogenic systemic fibrosis (NSF was first described in 2000 as a scleromyxedema-like illness in patients on chronic hemodialysis. The relationship between NSF and gadolinium contrast during magnetic resonance imaging was postulated in 2006, and subsequently, virtually all published cases of NSF have had documented prior exposure to gadolinium-containing contrast agents. NSF has been reported in patients from a variety of ethnic backgrounds from America, Europe, Asia and Australia. Skin lesions may evolve into poorly demarcated thickened plaques that range from erythematous to hyperpigmented. With time, the skin becomes markedly indurated and tethered to the underlying fascia. Extracutaneous manifestations also occur. The diagnosis of NSF is based on the presence of characteristic clinical features in the setting of chronic kidney disease, and substantiated by skin histology. Differential diagnosis is with scleroderma, scleredema, scleromyxedema, graft-versus-host disease, etc. NSF has a relentlessly progressive course. While there is no consistently successful treatment for NSF, improving renal function seems to slow or arrest the progression of this condition. Because essentially all cases of NSF have developed following exposure to a gadolinium-containing contrast agent, prevention of this devastating condition involves the careful avoidance of administering these agents to individuals at risk.

  8. Integrative smart market concept for system integration of decentralized generators and as a trading platform for grid operators; Integratives Smart Market Konzept zur Systemintegration dezentraler Erzeuger und als Handelsplattform fuer Netzbetreiber

    Energy Technology Data Exchange (ETDEWEB)

    Schmedes, Tanja [EWE AG, Oldenburg (Germany); Stadler, Michael [BTC AG, Oldenburg (Germany); Klose, Thomas [energy and meteo systems GmbH, Oldenburg (Germany); Hollinger, Raphael [Fraunhofer ISE, Freiburg im Breisgau (Germany); Ruettinger, Hannes [Fraunhofer AST, Ilmenau (Germany); Koch, Matthias [Oeko-Institut e.V., Freiburg im Breisgau (Germany); Rosinger, Christine [OFFIS - Institut fuer Informatik, Oldenburg (Germany)

    2012-07-01

    The E-Energy-Project eTelligence built and evaluated an energy market with low admission barriers. This market allowed different actors from the smart grid domain to trade electricity products. During a one year field trial the market was operated with real financial transactions between market participants taking place. To this end, it was necessary to completely integrate the market into energy trading processes currently in place. In addition to the field trial, simulations were carried out in order to demonstrate participation of a distribution system operator and to evaluate intraday-transactions with a high number of simulated market participants. This paper describes the market and gives information about the results attained during its operation. (orig.)

  9. Teaching Embedded System Concepts for Technological Literacy

    Science.gov (United States)

    Winzker, M.; Schwandt, A.

    2011-01-01

    A basic understanding of technology is recognized as important knowledge even for students not connected with engineering and computer science. This paper shows that embedded system concepts can be taught in a technological literacy course. An embedded system teaching block that has been used in an electronics module for non-engineers is…

  10. Innovative control systems for tracked vehicle platforms

    CERN Document Server

    2014-01-01

     This book has been motivated by an urgent need for designing and implementation of innovative control algorithms and systems for tracked vehicles. Nowadays the unmanned vehicles are becoming more and more common. Therefore there is a need for innovative mechanical constructions capable of adapting to various applications regardless the ground, air or water/underwater environment. There are multiple various activities connected with tracked vehicles. They can be distributed among three main groups: design and control algorithms, sensoric and vision based in-formation, construction and testing mechanical parts of unmanned vehicles. Scientists and researchers involved in mechanics, control algorithms, image processing, computer vision, data fusion, or IC will find this book useful.

  11. Conception Innovation Design System Based on PDM Framework

    Institute of Scientific and Technical Information of China (English)

    TANWu-zheng; MALi-zhuang; ZHAOMing-xi; XIAOShuang-jiu

    2004-01-01

    The system is based on the globally shared product model conforming to VRML Standard, and uses SmarTeam (PDM) system to integrate and encapsulate CAD, CAE and other application software for product development. The system takes sugarcane harvester, mobile telephone design analysis and evaluation as an example, and utilizes fuzzy evaluation principle to evaluate the design and simulation analysis results for decisions making. The platform provides a collaborative intelligent environment for the design of products, aiming at integrating people, process and data in the virtual product development. The multi-layered system architecture provides capability for KBM and conception innovation design process with a single unified data and process model so as to achieve true process streamlining and data integrity throughout the entire product development lifecycle, and hence improves enterprises efficiency.

  12. 3D shape measurement system developed on mobile platform

    Science.gov (United States)

    Wu, Zhoujie; Chang, Meng; Shi, Bowen; Zhang, Qican

    2017-02-01

    Three-dimensional (3-D) shape measurement technology based on structured light has become one hot research field inspired by the increasing requirements. Many methods have been implemented and applied in the industry applications, but most of their equipments are large and complex, cannot be portable. Meanwhile, the popularity of the smart mobile terminals, such as smart phones, provides a platform for the miniaturization and portability of this technology. The measurement system based on phase-shift algorithm and Gray-code pattern under the Android platform on a mobile phone is mainly studied and developed, and it has been encapsulated into a mobile phone application in order to reconstruct 3-D shape data in the employed smart phone easily and quickly. The experimental results of two measured object are given in this paper and demonstrate the application we developed in the mobile platform is effective.

  13. Fission Surface Power System Initial Concept Definition

    Science.gov (United States)

    2010-01-01

    Under the NASA Exploration Technology Development Program (ETDP) and in partnership with the Department of Energy (DOE), NASA has embarked on a project to develop Fission Surface Power (FSP) technology. The primary goals of the project are to 1) develop FSP concepts that meet expected surface power requirements at reasonable cost with added benefits over other options, 2) establish a hardwarebased technical foundation for FSP design concepts and reduce overall development risk, 3) reduce the cost uncertainties for FSP and establish greater credibility for flight system cost estimates, and 4) generate the key products to allow NASA decision-makers to consider FSP as a preferred option for flight development. The FSP project was initiated in 2006 as the Prometheus Program and the Jupiter Icy Moons Orbiter (JIMO) mission were phased-out. As a first step, NASA Headquarters commissioned the Affordable Fission Surface Power System Study to evaluate the potential for an affordable FSP development approach. With a cost-effective FSP strategy identified, the FSP team evaluated design options and selected a Preliminary Reference Concept to guide technology development. Since then, the FSP Preliminary Reference Concept has served as a point-of-departure for several NASA mission architecture studies examining the use of nuclear power and has provided the foundation for a series of "Pathfinder" hardware tests. The long-term technology goal is a Technology Demonstration Unit (TDU) integrated system test using full-scale components and a non-nuclear reactor simulator. The FSP team consists of Glenn Research Center (GRC), Marshall Space Flight Center (MSFC) and the DOE National Laboratories at Los Alamos (LANL), Idaho (INL), Oak Ridge (ORNL), and Sandia (SNL). The project is organized into two main elements: Concept Definition and Risk Reduction. Under Concept Definition, the team performs trade studies, develops analytical tools, and formulates system concepts. Under Risk

  14. Toward an integrated software platform for systems pharmacology.

    Science.gov (United States)

    Ghosh, Samik; Matsuoka, Yukiko; Asai, Yoshiyuki; Hsin, Kun-Yi; Kitano, Hiroaki

    2013-12-01

    Understanding complex biological systems requires the extensive support of computational tools. This is particularly true for systems pharmacology, which aims to understand the action of drugs and their interactions in a systems context. Computational models play an important role as they can be viewed as an explicit representation of biological hypotheses to be tested. A series of software and data resources are used for model development, verification and exploration of the possible behaviors of biological systems using the model that may not be possible or not cost effective by experiments. Software platforms play a dominant role in creativity and productivity support and have transformed many industries, techniques that can be applied to biology as well. Establishing an integrated software platform will be the next important step in the field.

  15. Concept of JINR Corporate Information System

    Science.gov (United States)

    Filozova, I. A.; Bashashin, M. V.; Korenkov, V. V.; Kuniaev, S. V.; Musulmanbekov, G.; Semenov, R. N.; Shestakova, G. V.; Strizh, T. A.; Ustenko, P. V.; Zaikina, T. N.

    2016-09-01

    The article presents the concept of JINR Corporate Information System (JINR CIS). Special attention is given to the information support of scientific researches - Current Research Information System as a part of the corporate information system. The objectives of such a system are focused on ensuring an effective implementation and research by using the modern information technology, computer technology and automation, creation, development and integration of digital resources on a common conceptual framework. The project assumes continuous system development, introduction the new information technologies to ensure the technological system relevance.

  16. Launch processing system concept to reality

    Science.gov (United States)

    Bailey, W. W.

    1985-01-01

    The Launch Processing System represents Kennedy Space Center's role in providing a major integrated hardware and software system for the test, checkout and launch of a new space vehicle. Past programs considered the active flight vehicle to ground interfaces as part of the flight systems and therefore the related ground system was provided by the Development Center. The major steps taken to transform the Launch Processing System from a concept to reality with the successful launches of the Shuttle Programs Space Transportation System are addressed.

  17. A new ATLAS muon CSC readout system with system on chip technology on ATCA platform

    Energy Technology Data Exchange (ETDEWEB)

    Claus, R., E-mail: claus@slac.stanford.edu

    2016-07-11

    The ATLAS muon Cathode Strip Chamber (CSC) back-end readout system has been upgraded during the LHC 2013–2015 shutdown to be able to handle the higher Level-1 trigger rate of 100 kHz and the higher occupancy at Run 2 luminosity. The readout design is based on the Reconfiguration Cluster Element (RCE) concept for high bandwidth generic DAQ implemented on the ATCA platform. The RCE design is based on the new System on Chip Xilinx Zynq series with a processor-centric architecture with ARM processor embedded in FPGA fabric and high speed I/O resources together with auxiliary memories to form a versatile DAQ building block that can host applications tapping into both software and firmware resources. The Cluster on Board (COB) ATCA carrier hosts RCE mezzanines and an embedded Fulcrum network switch to form an online DAQ processing cluster. More compact firmware solutions on the Zynq for G-link, S-link and TTC allowed the full system of 320 G-links from the 32 chambers to be processed by 6 COBs in one ATCA shelf through software waveform feature extraction to output 32 S-links. The full system was installed in Sept. 2014. We will present the RCE/COB design concept, the firmware and software processing architecture, and the experience from the intense commissioning towards LHC Run 2.

  18. System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters

    Directory of Open Access Journals (Sweden)

    V.J. Kurian

    2014-12-01

    Full Text Available Reliability of offshore platforms has become a very important issue in the Malaysian Oil and Gas Industry as, majority of the jacket platforms in Malaysian waters to date, have exceeded their design life. Reliability of a jacket platform can be assessed through reliability index and probability of failure. Conventional metocean consideration uses 100 year return period wave height associated with 100 year return period current velocity and wind speed. However, recent study shows that for Malaysian waters, the proposed metocean consideration should be 100 year return period wave height associated with 10 year return period current velocity and wind speed. Hence, this research investigated the effect of different metocean consideration, to system-based reliability of jacket platforms in Malaysian waters. Prior to that, the effect of different metocean consideration to the pushover analysis has also been studied. Besides, the significance of Pile Soil Interaction (PSI, wave direction and platform geometry were analyzed in a sensitivity study. Pushover analysis was performed on three jacket platforms representing three water regions in Malaysia to obtain Reserve Strength Ratio (RSR as an indicator of the reliability of the jackets. Utilizing sensitivity study parameters mentioned above, seven different case studies were undertaken to study their significance on RSR. The RSR values of each case study were compared and incorporated as resistance model of reliability analysis. Besides, platform specific response model of each jacket has been generated using response surface technique which was later incorporated into the limit state function for reliability analysis. Reliability analysis using First Order Reliability Method (FORM has been conducted in MATLAB to obtain the reliability index and probability of failure. Results from the reliability analysis were compared to analyze the effect of different metocean consideration. In this study, an updated

  19. LCLS XTOD Attenuator System System Concept Report

    Energy Technology Data Exchange (ETDEWEB)

    Kishiyama, K; Roeben, M; Trent, J; Ryutov, D; Shen, S

    2006-04-12

    The attenuator system for the Linac Coherent Light Source (LCLS) X-ray Transport, Optics and Diagnostics (XTOD) system has been configured and analyzed by the Lawrence Livermore National Laboratory's New Technologies Engineering Division (NTED) as requested by the SLAC/LCLS program. The system layout, performance analyses and selection of the vacuum components are presented in this System Conceptual Review (SCR) report. Also included are the plans for prototype, procurement, mechanical integration, and the cost estimates.

  20. Service systems concepts, modeling, and programming

    CERN Document Server

    Cardoso, Jorge; Poels, Geert

    2014-01-01

    This SpringerBrief explores the internal workings of service systems. The authors propose a lightweight semantic model for an effective representation to capture the essence of service systems. Key topics include modeling frameworks, service descriptions and linked data, creating service instances, tool support, and applications in enterprises.Previous books on service system modeling and various streams of scientific developments used an external perspective to describe how systems can be integrated. This brief introduces the concept of white-box service system modeling as an approach to mo

  1. Aerobrake concepts for NTP systems study

    Science.gov (United States)

    Cruz, Manuel I.

    1992-06-01

    Design concepts are described for landing large spacecraft masses on the Mars surface in support of manned missions with interplanetary transportation using Nuclear Thermal Propulsion (NTP). Included are the mission and systems analyses, trade studies and sensitivity analyses, design analyses, technology assessment, and derived requirements to support this concept. The mission phases include the Mars de-orbit, entry, terminal descent, and terminal touchdown. The study focuses primarily on Mars surface delivery from orbit after Mars orbit insertion using an NTP. The requirements associated with delivery of logistical supplies, habitats, and other equipment on minimum energy Earth to Mars transfers are also addressed in a preliminary fashion.

  2. A Compositive Information Collection Platform System Based on Web Service

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The aim is to solve the problem that how to share dispersive and heterogeneous data inside business information system or some other information source. On the basis of Web service, this paper adopts the notion of Data As Service to build service-oriented data integration architecture. According to this architecture, we develop data collection system which effectively integrates data from heterogeneous information source and present a uniform data view to end users by implementing sharing data from heterogeneous systems and information source .At last, this paper gives an example of a compositive information collection platform system.

  3. Health Information Systems (HIS): Concept and Technology

    CERN Document Server

    Almunawar, Mohammad Nabil

    2012-01-01

    A health information system (HIS) is the intersection of between healthcare's business process, and information systems to deliver better healthcare services. The nature of healthcare industry, which is highly influenced by economic, social, politic, and technological factors, has changed over time. This paper will address some important concepts of healthcare and related terminologies to provide a holistic view for HIS. Related technological milestones and major events are briefly summarized. The trends and rapid development of health information technologies are also discussed.

  4. Health Information Systems (HIS): Concept and Technology

    OpenAIRE

    Almunawar, Mohammad Nabil; Anshari, Muhammad

    2012-01-01

    A health information system (HIS) is the intersection of between healthcare's business process, and information systems to deliver better healthcare services. The nature of healthcare industry, which is highly influenced by economic, social, politic, and technological factors, has changed over time. This paper will address some important concepts of healthcare and related terminologies to provide a holistic view for HIS. Related technological milestones and major events are briefly summarized...

  5. OTEC platform configuration and integration. Volume II. Technical concept. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-07-07

    The configuration, integration, and evaluation studies performed in the first phase of this contract resulted in a ranking of the most feasible platform candidates for commercial OTEC applications. On the basis of the results obtained from three individual contractors performing the same study, the Department of Energy made selections of two platform hulls for each contractor for conceptual designs. For Phase-II studies, M. Rosenblatt and Son, Inc. (MR and S) project team was given the SPAR and SPHERE platforms to perform not only conceptual designs for, but also cost and time schedules and sensitivity analyses. This is the second volume of a three-volume MR and S report, and it presents the results of conceptual designs for the two platforms, the facilities and equipment required for construction, deployment, and operation of these platforms, and cost estimates and time schedules. All conceptual design work is performed for the baseline site on West Coast of Florida. The cost differentials and other considerations involved with deploying the platforms in the New Orleans and Puerto Rico sites are also presented. As an end product of the complete study, the costs for the SPAR and the SPHERE platforms are reported both in terms of acquisition costs in 1978 dollars and life cycle costs in dollars per kilowatt.

  6. Mechatronic Systems Design Methods, Models, Concepts

    CERN Document Server

    Janschek, Klaus

    2012-01-01

    In this textbook, fundamental methods for model-based design of mechatronic systems are presented in a systematic, comprehensive form. The method framework presented here comprises domain-neutral methods for modeling and performance analysis: multi-domain modeling (energy/port/signal-based), simulation (ODE/DAE/hybrid systems), robust control methods, stochastic dynamic analysis, and quantitative evaluation of designs using system budgets. The model framework is composed of analytical dynamic models for important physical and technical domains of realization of mechatronic functions, such as multibody dynamics, digital information processing and electromechanical transducers. Building on the modeling concept of a technology-independent generic mechatronic transducer, concrete formulations for electrostatic, piezoelectric, electromagnetic, and electrodynamic transducers are presented. More than 50 fully worked out design examples clearly illustrate these methods and concepts and enable independent study of th...

  7. Intelligent recommendation system for e-learning platforms

    OpenAIRE

    Tavares, Bruno; Faria, Luiz; Martins, Constantino

    2012-01-01

    As more and more digital resources are available, finding the appropriate document becomes harder. Thus, a new kind of tools, able to recommend the more appropriated resources according the user needs, becomes even more necessary. The current project implements an intelligent recommendation system for elearning platforms. The recommendations are based on one hand, the performance of the user during the training process and on the other hand, the requests made by the user in the fo...

  8. Fundamentals of power integrity for computer platforms and systems

    CERN Document Server

    DiBene, Joseph T

    2014-01-01

    An all-encompassing text that focuses on the fundamentals of power integrity Power integrity is the study of power distribution from the source to the load and the system level issues that can occur across it. For computer systems, these issues can range from inside the silicon to across the board and may egress into other parts of the platform, including thermal, EMI, and mechanical. With a focus on computer systems and silicon level power delivery, this book sheds light on the fundamentals of power integrity, utilizing the author's extensive background in the power integrity industry and un

  9. Cross-Platform Technologies

    Directory of Open Access Journals (Sweden)

    Maria Cristina ENACHE

    2017-04-01

    Full Text Available Cross-platform - a concept becoming increasingly used in recent years especially in the development of mobile apps, but this consistently over time and in the development of conventional desktop applications. The notion of cross-platform software (multi-platform or platform-independent refers to a software application that can run on more than one operating system or computing architecture. Thus, a cross-platform application can operate independent of software or hardware platform on which it is execute. As a generic definition presents a wide range of meanings for purposes of this paper we individualize this definition as follows: we will reduce the horizon of meaning and we use functionally following definition: a cross-platform application is a software application that can run on more than one operating system (desktop or mobile identical or in a similar way.

  10. Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

    NARCIS (Netherlands)

    Alblas, A.A.; Wortmann, J.C.

    2012-01-01

    The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

  11. Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

    NARCIS (Netherlands)

    Alblas, A.A.; Wortmann, J.C.

    2012-01-01

    The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later s

  12. A Virtual Reality avatar interaction (VRai) platform to assess residual executive dysfunction in active military personnel with previous mild traumatic brain injury: proof of concept.

    Science.gov (United States)

    Robitaille, Nicolas; Jackson, Philip L; Hébert, Luc J; Mercier, Catherine; Bouyer, Laurent J; Fecteau, Shirley; Richards, Carol L; McFadyen, Bradford J

    2017-10-01

    This proof of concept study tested the ability of a dual task walking protocol using a recently developed avatar-based virtual reality (VR) platform to detect differences between military personnel post mild traumatic brain injury (mTBI) and healthy controls. The VR platform coordinated motion capture, an interaction and rendering system, and a projection system to present first (participant-controlled) and third person avatars within the context of a specific military patrol scene. A divided attention task was also added. A healthy control group was compared to a group with previous mTBI (both groups comprised of six military personnel) and a repeated measures ANOVA tested for differences between conditions and groups based on recognition errors, walking speed and fluidity and obstacle clearance. The VR platform was well tolerated by both groups. Walking fluidity was degraded for the control group within the more complex navigational dual tasking involving avatars, and appeared greatest in the dual tasking with the interacting avatar. This navigational behaviour was not seen in the mTBI group. The present findings show proof of concept for using avatars, particularly more interactive avatars, to expose differences in executive functioning when applying context-specific protocols (here for the military). Implications for rehabilitation Virtual reality provides a means to control context-specific factors for assessment and intervention. Adding human interaction and agency through avatars increases the ecologic nature of the virtual environment. Avatars in the present application of the Virtual Reality avatar interaction platform appear to provide a better ability to reveal differences between trained, military personal with and without mTBI.

  13. A new concept drilling hoisting systems rigs

    Directory of Open Access Journals (Sweden)

    Jan Artymiuk

    2006-10-01

    Full Text Available In rig constructions two nev designs have been introduced apart from the conventional hoisting system. The first one is the Maritime Hydraulics A.S RamRig© drilling concept, based on hydraulic cylinders as actuators powered by up to 3.4 MW of hydraulic power in a closed loop hydraulic system. This synthesis of the well-known technology allows for the use of integrated active and passive heave compensation, as well as the storing and reuse of energy from the lowering phase of an operation. The RamRig concept makes mechanical brakes and clutches obsolete, since hoisting and lowering of the load is controlled solely by the closed loop hydraulics. This decreases the number of critical mechanical components in the hoisting system to a minimum. Safe handling and emergency shut down of extreme amounts of hydraulic power is taking care of by cartridge valves, which make rerouting of hydraulic power possible with minor losses of transferred effect.The second is a new land rig concept based on a patented rack & pinion drive system with a new generation of rigs which can instantly switch between the workover, drilling and the snubbing operations. The new rig concept has a direct drive, thus no drill line. The mobilization time is reduced as the rig has fewer truck loads, a faster rig up and a higher automation level. One land rig currently under construction will be the world’s first single operator unit, with a full pipe handling capability and a fully automated control system. The rig is fully equipped with the 250 T top drive which can be used for the rotation and snubbing, the purpose designed snubbing slips and other features supporting the multifunctional well operations. The paper will focus on features related to the land rig under construction, and how it may reduce the operational cost and improve the well performance.

  14. Concept of software interface for BCI systems

    Science.gov (United States)

    Svejda, Jaromir; Zak, Roman; Jasek, Roman

    2016-06-01

    Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

  15. A translational platform for prototyping closed-loop neuromodulation systems

    Directory of Open Access Journals (Sweden)

    Pedram eAfshar

    2013-01-01

    Full Text Available While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson’s disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders.

  16. Developing a service platform definition to promote evidence-based planning and funding of the mental health service system.

    Science.gov (United States)

    Lee, Yong Yi; Meurk, Carla S; Harris, Meredith G; Diminic, Sandra; Scheurer, Roman W; Whiteford, Harvey A

    2014-11-26

    Ensuring that a mental health system provides 'value for money' requires policy makers to allocate resources to the most cost-effective interventions. Organizing cost-effective interventions into a service delivery framework will require a concept that can guide the mapping of evidence regarding disorder-level interventions to aggregations of services that are meaningful for policy makers. The 'service platform' is an emerging concept that could be used to this end, however no explicit definition currently exists in the literature. The aim of this study was to develop a service platform definition that is consistent with how policy makers conceptualize the major elements of the mental health service system and to test the validity and utility of this definition through consultation with mental health policy makers. We derived a provisional definition informed by existing literature and consultation with experienced mental health researchers. Using a modified Delphi method, we obtained feedback from nine Australian policy makers. Respondents provided written answers to a questionnaire eliciting their views on the acceptability, comprehensibility and usefulness of a service platform definition which was subject to qualitative analysis. Overall, respondents understood the definition and found it both acceptable and useful, subject to certain conditions. They also provided suggestions for its improvement. Our findings suggest that the service platform concept could be a useful way of aggregating mental health services as a means for presenting priority setting evidence to policy makers in mental health. However, further development and testing of the concept is required.

  17. Production and Innovation in Supply Platforms: Insights from the Innovation Systems and Value Chain Approaches

    Institute of Scientific and Technical Information of China (English)

    LEMA Rasmus

    2006-01-01

    This paper introduces the term 'supply platform' as a tentative and open-ended concept that captures characteristics of central importance for the study of export-oriented producers. As regional concentrations of export-oriented suppliers in China and India are maturing,many firms are now striving to build up innovation capabilities. How do we study the transition from production capabilities to innovation capabilities in supply platforms? This paper reviews the insights from the innovation systems and global value chain literatures and discusses how we may build on these approaches for empirical studies of transition. It is found that these literatures provide important hypotheses for empirical research but more conceptual work is needed in order to address adequately the question of interest.

  18. Initial Study of an Effective Fast-Time Simulation Platform for Unmanned Aircraft System Traffic Management

    Science.gov (United States)

    Xue, Min; Rios, Joseph

    2017-01-01

    Small Unmanned Aerial Vehicles (sUAVs), typically 55 lbs and below, are envisioned to play a major role in surveilling critical assets, collecting important information, and delivering goods. Large scale small UAV operations are expected to happen in low altitude airspace in the near future. Many static and dynamic constraints exist in low altitude airspace because of manned aircraft or helicopter activities, various wind conditions, restricted airspace, terrain and man-made buildings, and conflict-avoidance among sUAVs. High sensitivity and high maneuverability are unique characteristics of sUAVs that bring challenges to effective system evaluations and mandate such a simulation platform different from existing simulations that were built for manned air traffic system and large unmanned fixed aircraft. NASA's Unmanned aircraft system Traffic Management (UTM) research initiative focuses on enabling safe and efficient sUAV operations in the future. In order to help define requirements and policies for a safe and efficient UTM system to accommodate a large amount of sUAV operations, it is necessary to develop a fast-time simulation platform that can effectively evaluate requirements, policies, and concepts in a close-to-reality environment. This work analyzed the impacts of some key factors including aforementioned sUAV's characteristics and demonstrated the importance of these factors in a successful UTM fast-time simulation platform.

  19. Multi-platform laser communication networking optical antenna system design

    Science.gov (United States)

    Zhang, Tao

    2016-10-01

    In this paper, a new conclusion based on rotating parabolic model and a different scheme of laser communication networking antenna system has been put forward in the paper. Based on rotating parabolic antenna, a new theory of the optical properties have been deduced, which can realize larger dynamic, duplex, networking communications among multiple platforms in 360° azimuth and pitch range. Meanwhile, depending on the operation mode of the system, multiple mathematical optimization models have been established. Tracking communication range, emission energy efficiency and receiving energy efficiency have been analyzed and optimized. Relationship among opening up and low apertures, the lens unit aperture, focal length of lens unit as well as rotating parabolic focal length have been analyzed. Tracking pitching range and emission energy utilization has carried on the theoretical derivation and optimization and networking platform link between energy receiver and transmitter has been analyzed. Taking some parameters of this new system into calculation, optimized results can be utilized with MATLAB software for its application and system of communication engineering. The rotating parabolic internal can form a hollow structure, which is utilized for miniaturization, light-weighted design and realize duplex communication in a wide range and distance. Circular orbit guidance is the modern way used in dynamic tracking system. The new theory and optical antenna system has widespread applications value as well.

  20. Implementation of Wireless Communications Systems on FPGA-Based Platforms

    Directory of Open Access Journals (Sweden)

    Voros NS

    2007-01-01

    Full Text Available Wireless communications are a very popular application domain. The efficient implementation of their components (access points and mobile terminals/network interface cards in terms of hardware cost and design time is of great importance. This paper describes the design and implementation of the HIPERLAN/2 WLAN system on a platform including general purpose microprocessors and FPGAs. Detailed implementation results (performance, code size, and FPGA resources utilization are presented. The main goal of the design case presented is to provide insight into the design aspects of a complex system based on FPGAs. The results prove that an implementation based on microprocessors and FPGAs is adequate for the access point part of the system where the expected volumes are rather small. At the same time, such an implementation serves as a prototyping of an integrated implementation (System-on-Chip, which is necessary for the mobile terminals of a HIPERLAN/2 system. Finally, firmware upgrades were developed allowing the implementation of an outdoor wireless communication system on the same platform.

  1. Implementation of Wireless Communications Systems on FPGA-Based Platforms

    Directory of Open Access Journals (Sweden)

    N. S. Voros

    2007-02-01

    Full Text Available Wireless communications are a very popular application domain. The efficient implementation of their components (access points and mobile terminals/network interface cards in terms of hardware cost and design time is of great importance. This paper describes the design and implementation of the HIPERLAN/2 WLAN system on a platform including general purpose microprocessors and FPGAs. Detailed implementation results (performance, code size, and FPGA resources utilization are presented. The main goal of the design case presented is to provide insight into the design aspects of a complex system based on FPGAs. The results prove that an implementation based on microprocessors and FPGAs is adequate for the access point part of the system where the expected volumes are rather small. At the same time, such an implementation serves as a prototyping of an integrated implementation (System-on-Chip, which is necessary for the mobile terminals of a HIPERLAN/2 system. Finally, firmware upgrades were developed allowing the implementation of an outdoor wireless communication system on the same platform.

  2. The Federated Satellite Systems paradigm: Concept and business case evaluation

    Science.gov (United States)

    Golkar, Alessandro; Lluch i Cruz, Ignasi

    2015-06-01

    This paper defines the paradigm of Federated Satellite Systems (FSS) as a novel distributed space systems architecture. FSS are networks of spacecraft trading previously inefficiently allocated and unused resources such as downlink bandwidth, storage, processing power, and instrument time. FSS holds the promise to enhance cost-effectiveness, performance and reliability of existing and future space missions, by networking different missions and effectively creating a pool of resources to exchange between participants in the federation. This paper introduces and describes the FSS paradigm, and develops an approach integrating mission analysis and economic assessments to evaluate the feasibility of the business case of FSS. The approach is demonstrated on a case study on opportunities enabled by FSS to enhance space exploration programs, with particular reference to the International Space Station. The application of the proposed methodology shows that the FSS concept is potentially able to create large commercial markets of in-space resources, by providing the technical platform to offer the opportunity for spacecraft to share or make use of unused resources within their orbital neighborhood. It is shown how the concept is beneficial to satellite operators, space agencies, and other stakeholders of the space industry to more flexibly interoperate space systems as a portfolio of assets, allowing unprecedented collaboration among heterogeneous types of missions.

  3. Concepts and trends in healthcare information systems

    CERN Document Server

    Koutsouris, Dionysios-Dimitrios

    2014-01-01

    Concepts and Trends in Healthcare Information Systems covers the latest research topics in the field from leading researchers and practitioners. This book offers theory-driven research that explores the role of Information Systems in the delivery of healthcare in its diverse organizational and regulatory settings. In addition to the embedded role of Information Technology (IT) in clinical and diagnostics equipment, Information Systems are uniquely positioned to capture, store, process, and communicate timely information to decision makers for better coordination of healthcare at both the individual and population levels. For example, data mining and decision support capabilities can identify potential adverse events for an individual patient while also contributing to the population's health by providing insights into the causes of disease complications. Information systems have great potential to reduce healthcare costs and improve outcomes. The healthcare delivery systems share similar characteristics w...

  4. Annual Cycle Energy System concept and application

    Energy Technology Data Exchange (ETDEWEB)

    Moyers, J. C.; Hise, E. C.

    1977-01-01

    The Annual Cycle Energy System (ACES), under development at ERDA's Oak Ridge National Laboratory, promises to provide space heating, air conditioning, and water heating at a significantly lower expenditure of energy than conventional space conditioning and water heating systems. The ACES embodies heat pumping, thermal storage and, where climate dictates, solar assistance. The concept is described, along with variations in design that permit flexibility to maximize energy conservation or to provide load management capabilities. Installations that exist or are under construction are described and variations that are incorporated to meet specific objectives are discussed.

  5. A system verification platform for high-density epiretinal prostheses.

    Science.gov (United States)

    Chen, Kuanfu; Lo, Yi-Kai; Yang, Zhi; Weiland, James D; Humayun, Mark S; Liu, Wentai

    2013-06-01

    Retinal prostheses have restored light perception to people worldwide who have poor or no vision as a consequence of retinal degeneration. To advance the quality of visual stimulation for retinal implant recipients, a higher number of stimulation channels is expected in the next generation retinal prostheses, which poses a great challenge to system design and verification. This paper presents a system verification platform dedicated to the development of retinal prostheses. The system includes primary processing, dual-band power and data telemetry, a high-density stimulator array, and two methods for output verification. End-to-end system validation and individual functional block characterization can be achieved with this platform through visual inspection and software analysis. Custom-built software running on the computers also provides a good way for testing new features before they are realized by the ICs. Real-time visual feedbacks through the video displays make it easy to monitor and debug the system. The characterization of the wireless telemetry and the demonstration of the visual display are reported in this paper using a 256-channel retinal prosthetic IC as an example.

  6. Mobile Operating Systems and Application Development Platforms: A Survey

    Directory of Open Access Journals (Sweden)

    Okediran O. O

    2014-07-01

    Full Text Available Earlier mobile communication technologies were dominated by vertically integrated service provision which are highly bounded mainly to voice and short message services that are organized in a monopolistic competition between few mobile virtual network operators, service providers and enhanced service providers. In the recent years, however, radical change driven by advancements in technology, witnessed the introduction and further development of smartphones where the user can get access to new applications and services by connecting to the device manufactures’ application stores and the like. These smartphones have added many features of a fullfledged computer: high speed processors, large storage space, multitasking, high-resolution screens and cameras, multipurpose communication hardware, and so on. However, these devices market is dominated by a number of different technological platforms, including different operating systems (OS and application development platforms, resulting in a variety of different competing solutions on the market driven by different actors. This paper detailed a review and comparative analysis of the features of these technological platforms.

  7. Concept: Using E-Learning Platforms in Economical and Entrepreneurial Development

    Directory of Open Access Journals (Sweden)

    Catalin Ionut SILVESTRU

    2015-01-01

    Full Text Available Business failure is an intrinsic characteristic of entrepreneurship. Given its dimension and repercussions, we consider that entrepreneurial education, in particular entrepreneurial e-learning platforms should include a module on business failure covering in addition to the national legal framework and EU policies, the key barriers faced by entrepreneurs and causes of business failure and other such elements. Thus, we propose to develop a platform based on open source software, such as Moodle in which modules based on SCORM and interactive teaching have been developed, with all the tools that are needed to simulate classic teaching.

  8. Real-time horizontality adjusting and control system of a large platform applied to satellite experiment

    Institute of Scientific and Technical Information of China (English)

    ZHONG Shi-sheng; ZHANG Shi-peng; WANG Rui

    2007-01-01

    In order to satisfy a satellite horizontality requirement in an experiment, it is indispensable to monitor and adjust the horizontality of a large platform loading the satellite under the condition of ultra-low temperature with real time. So the control system design and control strategy are described in detail to accomplish the horizontality monitoring and adjusting. The system adopts the industry control computer as the upper computer and the SIEMENS S7-300 PLC as the lower computer. The upper computer that bases on industry configuration software IFIX takes charge of monitoring the platform and puts forward the control strategy. PLC takes charge of receiving the adjusting instructions and controlling the legs moving to accomplish the horizontality adjusting. The horizontality adjusting strategy is emphasized and the concept of grads is introduced to establish a mathematics model of the platform inclined state, so the adjusting method is obtained. Accordingly the key question of the automatic horizontality adjusting is solved in this control system.

  9. New Design Concept for a Lifting Platform Made of Composite Material

    Science.gov (United States)

    Solazzi, L.; Scalmana, R.

    2013-08-01

    Elevating work platforms are hoists equipment that are increasingly used in many applications, like in the construction industry and in the maintenance field. The maintenance of the hub of the wind turbines, for example, can be done through the use of a working platform; these structures have to reach great heights and obviously they have to satisfy the constraints induced by the highway standards, like the maximum axle load and the maximum overall dimensions. To satisfy these requests the material of the structures changed from the classic structural steel (S235 JR, S275 JR or S355JR) to high strength steel (S700 to S1100 or more), characterized by a significantly higher specific resistance. The idea of this paper is to use a composite material for the construction of the arms of an elevating platform in order to reduce the global weight of the machine. The analyses on the new kind of platform show the technical possibility to change the material of the arms with composite materials and this produces a significant reduction of the weight of the machine components, about 50 %. Being a feasibility study, still remain open some problems such as the mechanical behavior of the used composite materials (fatigue, environment effects, etc.).

  10. Cloud Computing Platform for an Online Model Library System

    Directory of Open Access Journals (Sweden)

    Mingang Chen

    2013-01-01

    Full Text Available The rapid developing of digital content industry calls for online model libraries. For the efficiency, user experience, and reliability merits of the model library, this paper designs a Web 3D model library system based on a cloud computing platform. Taking into account complex models, which cause difficulties in real-time 3D interaction, we adopt the model simplification and size adaptive adjustment methods to make the system with more efficient interaction. Meanwhile, a cloud-based architecture is developed to ensure the reliability and scalability of the system. The 3D model library system is intended to be accessible by online users with good interactive experiences. The feasibility of the solution has been tested by experiments.

  11. A New ATLAS Muon CSC Readout System with System on Chip Technology on ATCA Platform

    CERN Document Server

    AUTHOR|(SzGeCERN)696050; Garelli, N.; Herbst, R.T.; Huffer, M.; Iakovidis, G.; Iordanidou, K.; Kwan, K.; Kocian, M.; Lankford, A.J.; Moschovakos, P.; Nelson, A.; Ntekas, K.; Ruckman, L.; Russell, J.; Schernau, M.; Schlenker, S.; Su, D.; Valderanis, C.; Wittgen, M.; Bartoldus, R.

    2016-01-01

    The ATLAS muon Cathode Strip Chamber (CSC) backend readout system has been upgraded during the LHC 2013-2015 shutdown to be able to handle the higher Level-1 trigger rate of 100 kHz and the higher occupancy at Run 2 luminosity. The readout design is based on the Reconfigurable Cluster Element (RCE) concept for high bandwidth generic DAQ implemented on the Advanced Telecommunication Computing Architecture (ATCA) platform. The RCE design is based on the new System on Chip XILINX ZYNQ series with a processor-centric architecture with ARM processor embedded in FPGA fabric and high speed I/O resources together with auxiliary memories to form a versatile DAQ building block that can host applications tapping into both software and firmware resources. The Cluster on Board (COB) ATCA carrier hosts RCE mezzanines and an embedded Fulcrum network switch to form an online DAQ processing cluster. More compact firmware solutions on the ZYNQ for G-link, S-link and TTC allowed the full system of 320 G-links from the 32 chambe...

  12. A New ATLAS Muon CSC Readout System with System on Chip Technology on ATCA Platform

    CERN Document Server

    ATLAS CSC Collaboration; The ATLAS collaboration

    2016-01-01

    The ATLAS muon Cathode Strip Chamber (CSC) backend readout system has been upgrade during the LHC 2013-2015 shutdown to be able to handle the higher Level-1 trigger rate of 100 kHz and the higher occupancy at Run 2 luminosity. The readout design is based on the Reconfigurable Cluster Element (RCE) concept for high bandwidth generic DAQ implemented on the Advanced Telecommunication Computing Architecture (ATCA) platform. The RCE design is based on the new System on Chip XILINX ZYNQ series with a processor-centric architecture with ARM processor embedded in FPGA fabric and high speed I/O resources together with auxiliary memories to form a versatile DAQ building block that can host applications tapping into both software and firmware resources. The Cluster on Board (COB) ATCA carrier hosts RCE mezzanines and an embedded Fulcrum network switch to form an online DAQ processing cluster. More compact firmware solutions on the ZYNQ for G-link, S-link and TTC allowed the full system of 320 G-links from the 32 chamber...

  13. A New ATLAS Muon CSC Readout System with System on Chip Technology on ATCA Platform

    CERN Document Server

    AUTHOR|(SzGeCERN)664042

    2016-01-01

    The ATLAS muon Cathode Strip Chamber (CSC) back-end readout system has been upgraded during the LHC 2013-2015 shutdown to be able to handle the higher Level-1 trigger rate of 100 kHz and the higher occupancy at Run 2 luminosity. The readout design is based on the Reconfiguration Cluster Element (RCE) concept for high bandwidth generic DAQ implemented on the ATCA platform. The RCE design is based on the new System on Chip Xilinx Zynq series with a processor-centric architecture with ARM processor embedded in FPGA fabric and high speed I/O resources together with auxiliary memories to form a versatile DAQ building block that can host applications tapping into both software and firmware resources. The Cluster on Board (COB) ATCA carrier hosts RCE mezzanines and an embedded Fulcrum network switch to form an online DAQ processing cluster. More compact firmware solutions on the Zynq for G-link, S-link and TTC allowed the full system of 320 G-links from the 32 chambers to be processed by 6 COBs in one ATCA shelf thr...

  14. Towards a Multifunctional Electrochemical Sensing and Niosome Generation Lab-on-Chip Platform Based on a Plug-and-Play Concept

    Directory of Open Access Journals (Sweden)

    Adnane Kara

    2016-05-01

    Full Text Available In this paper, we present a new modular lab on a chip design for multimodal neurotransmitter (NT sensing and niosome generation based on a plug-and-play concept. This architecture is a first step toward an automated platform for an automated modulation of neurotransmitter concentration to understand and/or treat neurodegenerative diseases. A modular approach has been adopted in order to handle measurement or drug delivery or both measurement and drug delivery simultaneously. The system is composed of three fully independent modules: three-channel peristaltic micropumping system, a three-channel potentiostat and a multi-unit microfluidic system composed of pseudo-Y and cross-shape channels containing a miniature electrode array. The system was wirelessly controlled by a computer interface. The system is compact, with all the microfluidic and sensing components packaged in a 5 cm × 4 cm × 4 cm box. Applied to serotonin, a linear calibration curve down to 0.125 mM, with a limit of detection of 31 μ M was collected at unfunctionalized electrodes. Added sensitivity and selectivity was achieved by incorporating functionalized electrodes for dopamine sensing. Electrode functionalization was achieved with gold nanoparticles and using DNA and o-phenylene diamine polymer. The as-configured platform is demonstrated as a central component toward an “intelligent” drug delivery system based on a feedback loop to monitor drug delivery.

  15. Towards a Multifunctional Electrochemical Sensing and Niosome Generation Lab-on-Chip Platform Based on a Plug-and-Play Concept.

    Science.gov (United States)

    Kara, Adnane; Rouillard, Camille; Mathault, Jessy; Boisvert, Martin; Tessier, Frédéric; Landari, Hamza; Melki, Imene; Laprise-Pelletier, Myriam; Boisselier, Elodie; Fortin, Marc-André; Boilard, Eric; Greener, Jesse; Miled, Amine

    2016-05-28

    In this paper, we present a new modular lab on a chip design for multimodal neurotransmitter (NT) sensing and niosome generation based on a plug-and-play concept. This architecture is a first step toward an automated platform for an automated modulation of neurotransmitter concentration to understand and/or treat neurodegenerative diseases. A modular approach has been adopted in order to handle measurement or drug delivery or both measurement and drug delivery simultaneously. The system is composed of three fully independent modules: three-channel peristaltic micropumping system, a three-channel potentiostat and a multi-unit microfluidic system composed of pseudo-Y and cross-shape channels containing a miniature electrode array. The system was wirelessly controlled by a computer interface. The system is compact, with all the microfluidic and sensing components packaged in a 5 cm × 4 cm × 4 cm box. Applied to serotonin, a linear calibration curve down to 0.125 mM, with a limit of detection of 31 μ M was collected at unfunctionalized electrodes. Added sensitivity and selectivity was achieved by incorporating functionalized electrodes for dopamine sensing. Electrode functionalization was achieved with gold nanoparticles and using DNA and o-phenylene diamine polymer. The as-configured platform is demonstrated as a central component toward an "intelligent" drug delivery system based on a feedback loop to monitor drug delivery.

  16. Platforms for artificial neural networks : neurosimulators and performance prediction of MIMD-parallel systems

    NARCIS (Netherlands)

    Vuurpijl, L.G.

    1998-01-01

    In this thesis, two platforms for simulating artificial neural networks are discussed: MIMD-parallel processor systems as an execution platform and neurosimulators as a research and development platform. Because of the parallelism encountered in neural networks, distributed processor systems seem to

  17. Platforms for artificial neural networks : neurosimulators and performance prediction of MIMD-parallel systems

    NARCIS (Netherlands)

    Vuurpijl, L.G.

    1998-01-01

    In this thesis, two platforms for simulating artificial neural networks are discussed: MIMD-parallel processor systems as an execution platform and neurosimulators as a research and development platform. Because of the parallelism encountered in neural networks, distributed processor systems seem to

  18. UTBot: A Virtual Agent Platform for Teaching Agent System Design

    Directory of Open Access Journals (Sweden)

    In-Cheol Kim

    2007-02-01

    Full Text Available We introduce UTBot, a virtual agent platform for teaching agent system design. UTBot implements a client for the Unreal Tournament game server and Gamebots system. It provides students with the basic functionality required to start developing their own intelligent virtual agents to play autonomously UT games. UTBot includes a generic agent architecture, CAA (Context-sensitive Agent Architecture, a domain-specific world model, a visualization tool, several basic strategies (represented by internal modes and internal behaviors, and skills (represented by external behaviors. The CAA architecture can support complex long-term behaviors as well as reactive short-term behaviors. It also realizes high context-sensitivity of behaviors. We also discuss our experience using UTBot as a pedagogical tool for teaching agent system design in undergraduate Artificial Intelligence course.

  19. Genome Modeling System: A Knowledge Management Platform for Genomics.

    Directory of Open Access Journals (Sweden)

    Malachi Griffith

    2015-07-01

    Full Text Available In this work, we present the Genome Modeling System (GMS, an analysis information management system capable of executing automated genome analysis pipelines at a massive scale. The GMS framework provides detailed tracking of samples and data coupled with reliable and repeatable analysis pipelines. The GMS also serves as a platform for bioinformatics development, allowing a large team to collaborate on data analysis, or an individual researcher to leverage the work of others effectively within its data management system. Rather than separating ad-hoc analysis from rigorous, reproducible pipelines, the GMS promotes systematic integration between the two. As a demonstration of the GMS, we performed an integrated analysis of whole genome, exome and transcriptome sequencing data from a breast cancer cell line (HCC1395 and matched lymphoblastoid line (HCC1395BL. These data are available for users to test the software, complete tutorials and develop novel GMS pipeline configurations. The GMS is available at https://github.com/genome/gms.

  20. Semiconductor Nanowires: A Platform for Exploring Limits and Concepts for Nano-Enabled Solar Cells

    OpenAIRE

    Kempa, Thomas Jan; Day, Robert Watson; Kim, Sun-Kyung; Park, Hong-Gyu; Lieber, Charles M.

    2013-01-01

    Over the past decade extensive studies of single semiconductor nanowire and nanowire array photovoltaic devices have explored the potential of these materials as platforms for a new generation of efficient and cost-effective solar cells. This feature review discusses strategies for implementation of semiconductor nanowires in solar energy applications, including advances in complex nanowire synthesis and characterization, fundamental insights from characterization of devices, utilization and ...

  1. FAST Platform: A Concept for User-Centric, Enterprise Class Mashup

    OpenAIRE

    Hoyer, Volker; Janner, Till; Schroth, Christoph; Delchev, Ivan; Urmetzer, Florian

    2009-01-01

    A new kind of Web-based application, known as Enterprise Mashups, has been gaining momentum in the last years: Business users with no or limited programming skills are empowered to leverage in a collaborative manner existing Mashup components and to combine and reuse existing Web-based resources within minutes to new value added applications in order to solve individual and adhoc business problems. In the frame of the EU funded research project FAST, we are currently developing a new platform...

  2. Mobile Attendance Checking System on Android Platform for Kazakhstani University

    Science.gov (United States)

    Saparkhojayev, N.; Shakhov, E.; Mailybayev, Y.

    2016-04-01

    In the 21st century-the century of Information Technology, it is difficult to imagine life without any gadgets: phones, tablets, computers, laptops, and so on. Today, smartphones and tablets are becoming popular, and thus their operating systems become popular too. Android is designed for low-power devices that run on battery power at full capacity, using all of its services, such as cameras, lights, GPS navigation, Wi-Fi, etc. In Kazakhstani universities, the process of checking students’ attendance is one of the important issues, because final grade evaluation of students is based on their total number of appearances and their grades during the whole semester. This raises the question of having some tool to control students’ attendance. There are many possible ways of controlling attendance: there are many examples when universities prefer to control attendance by the use of paper sheet, and some universities prefer to use two-stage way of controlling attendance: firstly, teachers and professors use paper sheet for checking students’ attendance and after this, they fill out these information into a system manually. However, this is not an efficient way since there will be spent much of time for calling students names and putting marks like “presence” or “absence” if the class is a lecture class, and in this class at least 5 groups are presented. Furthermore, some students may call his/her friend as “presence” nevertheless to the fact that this student is currently absent. After taking into consideration all these issues and the fact that many gadgets use Android platform, authors of the following research paper decided to create a mobile system that makes easier to check students’ attendance automatically, and this system is implemented in Almaty Management University, Kazakhstan. The system is based on Android platform, and in this paper, details of this system are presented.

  3. LXI instrument development platform based on an open embedded operating system

    Institute of Scientific and Technical Information of China (English)

    Yu Wilson

    2007-01-01

    This paper introduces the architecture and components of LXI instrument development platform based on an open embedded operating system, which is a modular and configurable platform. The platform is a total solution to develop LXI instrument modules and systems. On the other hand, it also supports other types of instrument development. This is a generic and efficient platform. At the end, this paper addresses the technical tends,challenges, and recommends solutions.

  4. Platform for Modeling and Simulation of Photovoltaic Generation Systems

    Directory of Open Access Journals (Sweden)

    Anny A. Arroyave-Berrio

    2013-11-01

    Full Text Available A platform for modeling and simulation using Matlab is presented. The platform has four models of photovoltaic panels. It identifies the parameters of each one, for a given solar panel, based on experimental data of voltage, current and environmental conditions. Also the platform generates four blocks, for using in Matlab-Simulink and Psim simulation tools. The experimental validation of the platform was made using the PV panels of the Metropolitan Technological Institute (ITM Lab.

  5. Tawhidic Based Economic System: A Preliminary Conception

    Directory of Open Access Journals (Sweden)

    Nurul Hilmiyah Hilmiyah

    2016-12-01

    Full Text Available This study investigates contemporary mainstream economic system, does Islamic Economics taking advantage of the shortfall of the system outlined above based on Tawhidical approach? By using descriptive qualitative method this paper proposed the appropriate of Islamic economics theorize that the Islamic system provide the ideal form of a socio-economic order. This paper found that Tawhidic based economics approaches can be focused towards seeing wholes of economics, rather than parts; seeing economics activities as a worship, rather than competition; cultivating the solidarity (charity, rather than individualism and creating the justice, rather than injustice. Thus this paper designed to provide the concept of Islamic economic system with Tawhid as the basis, to fit the philosophy of economic science and reality of human life. The paper also shows the position of Tawhid in the system and theory of economy in creating prosperity and benefit for all mankind comparing to mainstream economic system and their theory.DOI: 10.15408/aiq.v9i1.3481 

  6. Parallel Web Mining System Based on Cloud Platform

    Institute of Scientific and Technical Information of China (English)

    Shengmei Luo; Qing He; Lixia Liu; Xiang Ao; Ning Li; Fuzhen Zhuang

    2012-01-01

    Traditional machine-learning algorithms are struggling to handle the exceedingly large amount of data being generated by the internet. In real-world applications, there is an urgent need for machine-learning algorithms to be able to handle large-scale, high-dimensional text data. Cloud computing involves the delivery of computing and storage as a service to a heterogeneous community of recipients, Recently, it has aroused much interest in industry and academia. Most previous works on cloud platforms only focus on the parallel algorithms for structured data. In this paper, we focus on the parallel implementation of web-mining algorithms and develop a parallel web-mining system that includes parallel web crawler; parallel text extract, transform and load (ETL) and modeling; and parallel text mining and application subsystems. The complete system enables variable real-world web-mining applications for mass data.

  7. Developing a Service Platform Definition to Promote Evidence-Based Planning and Funding of the Mental Health Service System

    Directory of Open Access Journals (Sweden)

    Yong Yi Lee

    2014-11-01

    Full Text Available Ensuring that a mental health system provides ‘value for money’ requires policy makers to allocate resources to the most cost-effective interventions. Organizing cost-effective interventions into a service delivery framework will require a concept that can guide the mapping of evidence regarding disorder-level interventions to aggregations of services that are meaningful for policy makers. The ‘service platform’ is an emerging concept that could be used to this end, however no explicit definition currently exists in the literature. The aim of this study was to develop a service platform definition that is consistent with how policy makers conceptualize the major elements of the mental health service system and to test the validity and utility of this definition through consultation with mental health policy makers. We derived a provisional definition informed by existing literature and consultation with experienced mental health researchers. Using a modified Delphi method, we obtained feedback from nine Australian policy makers. Respondents provided written answers to a questionnaire eliciting their views on the acceptability, comprehensibility and usefulness of a service platform definition which was subject to qualitative analysis. Overall, respondents understood the definition and found it both acceptable and useful, subject to certain conditions. They also provided suggestions for its improvement. Our findings suggest that the service platform concept could be a useful way of aggregating mental health services as a means for presenting priority setting evidence to policy makers in mental health. However, further development and testing of the concept is required.

  8. Smart Platforms Surveillance System to Enhance Communication in Disaster Environments

    Directory of Open Access Journals (Sweden)

    Satea Hikmat Alnajjar

    2013-04-01

    Full Text Available The modern communications technology is a positive case for disaster risk reduction, since they to it provides critical information to realize risk assessment. In this study, we present an innovativetechnique is characterized by an aerial platform as a robust method to monitor disaster area. Traffic Surveillance System (TSS, based on Detection and Early Warning (DEW units, is used to monitor theroads in preventing accidents at the same time finding what causes the accidents. This is done by implementing some image vision protocols as that of Gaussian. This paper will discuss about the cameravideo- surveillance capabilities of tracking across different and varied road environments including detection of moving vehicles. The programming method used will be the functional programming ofOpenCV which could be operated under Linux OS. The bit error rate (BER also was evaluated among multiple platform links in mobile environments. We adopted multi-level deployment besides low aggregate throughput delivered to all remote-sensing terminals in order to accommodate the reliability of data transmission from the last mile.

  9. OPTIMED Platform: Curriculum Harmonisation System for Medical and Healthcare Education.

    Science.gov (United States)

    Komenda, Martin; Schwarz, Daniel; Vaitsis, Christos; Zary, Nabil; Štěrba, Jaroslav; Dušek, Ladislav

    2015-01-01

    This contribution introduces a new web-based OPTIMED platform for an effective harmonisation of medical and healthcare curriculum. Behind the engineering background stays an original methodology covering planning model based on formal parameterisation of curriculum, which fully support the outcome-based approach to education. With the use of developed system curriculum, designers and senior guarantors can provide a clear and transparent composition of compulsory and optional courses, and easily identify potential duplicities and overlaps across a domain of medical and healthcare education. For students, it means an absolutely new way of how to understand what is really taught during a learning period, including all necessary meta information. All members across the academic community are able to search and consequently display in detail the most important domains related to the particular year, term, course, medical discipline or topic. The presented solution significantly enhances the transparency and continuity of the environment in which the authors of the teaching materials as well as their consumers work daily. Suggestions for future improvements of the OPTIMED platform are discussed.

  10. Bioelectrochemical system platform for sustainable environmental remediation and energy generation.

    Science.gov (United States)

    Wang, Heming; Luo, Haiping; Fallgren, Paul H; Jin, Song; Ren, Zhiyong Jason

    2015-01-01

    The increasing awareness of the energy-environment nexus is compelling the development of technologies that reduce environmental impacts during energy production as well as energy consumption during environmental remediation. Countries spend billions in pollution cleanup projects, and new technologies with low energy and chemical consumption are needed for sustainable remediation practice. This perspective review provides a comprehensive summary on the mechanisms of the new bioelectrochemical system (BES) platform technology for efficient and low cost remediation, including petroleum hydrocarbons, chlorinated solvents, perchlorate, azo dyes, and metals, and it also discusses the potential new uses of BES approach for some emerging contaminants remediation, such as CO2 in air and nutrients and micropollutants in water. The unique feature of BES for environmental remediation is the use of electrodes as non-exhaustible electron acceptors, or even donors, for contaminant degradation, which requires minimum energy or chemicals but instead produces sustainable energy for monitoring and other onsite uses. BES provides both oxidation (anode) and reduction (cathode) reactions that integrate microbial-electro-chemical removal mechanisms, so complex contaminants with different characteristics can be removed. We believe the BES platform carries great potential for sustainable remediation and hope this perspective provides background and insights for future research and development.

  11. Design Concepts of Emergency Response Robot Platform K-R2D2

    Energy Technology Data Exchange (ETDEWEB)

    Noh, Sun Young; Jeong, Kyungmin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    From the analysis for various mobile robots competed in DARPA Robotics Challenge, there are some drawbacks in using two or four legs because bipedal locomotion is not yet suitable for maintaining stability and quadrupedal locomotion is difficult to go through narrow aisles. Motivated by the above observations, we propose a K-R2D2 robot platform with three legs arranged in the form of a triangle like as R2-D2 robot which is a fictional robot character in the Star Wars movies. This robot has 3 legs with tracks in each sole of the leg. It is statically stable since there are three contact points to ground. In addition, three legs are also possible to design a structure walking stairs that can expand and contract in the vertical direction. This paper has presented the conceptual design, it is developed on the purpose of quick response instead of emergent workers to the extreme conditions disasters. This robot is emergency response robot platform KR2D2 with three legs, which is statically stable to walk or wheel depending on the terrains and move quickly as possible as on uneven terrain or stairs.

  12. Liposomal drug delivery systems: from concept to clinical applications.

    Science.gov (United States)

    Allen, Theresa M; Cullis, Pieter R

    2013-01-01

    The first closed bilayer phospholipid systems, called liposomes, were described in 1965 and soon were proposed as drug delivery systems. The pioneering work of countless liposome researchers over almost 5 decades led to the development of important technical advances such as remote drug loading, extrusion for homogeneous size, long-circulating (PEGylated) liposomes, triggered release liposomes, liposomes containing nucleic acid polymers, ligand-targeted liposomes and liposomes containing combinations of drugs. These advances have led to numerous clinical trials in such diverse areas as the delivery of anti-cancer, anti-fungal and antibiotic drugs, the delivery of gene medicines, and the delivery of anesthetics and anti-inflammatory drugs. A number of liposomes (lipidic nanoparticles) are on the market, and many more are in the pipeline. Lipidic nanoparticles are the first nanomedicine delivery system to make the transition from concept to clinical application, and they are now an established technology platform with considerable clinical acceptance. We can look forward to many more clinical products in the future.

  13. Internet Based General Computer Simulation Platform for Distributed Multi-Robotic System

    Institute of Scientific and Technical Information of China (English)

    迟艳玲; 张斌; 王硕; 谭民

    2002-01-01

    A general computer simulation platform is designed for the purpose of catrrying out experiments on the Distributed Multi-Robotic System. The simulation platform is based on Internet and possesses generality, validity, real-time display and function of supporting algorithm developing. In addition, the platform is equipped wit recording and replay module, and simulation experiment can be reviewed at anytime.By now; a few algorithms have been developed on the Simulation Platform designed.

  14. A Platform-Based Methodology for System-Level Mixed-Signal Design

    Directory of Open Access Journals (Sweden)

    Alberto Sangiovanni-Vincentelli

    2010-01-01

    Full Text Available The complexity of today's embedded electronic systems as well as their demanding performance and reliability requirements are such that their design can no longer be tackled with ad hoc techniques while still meeting tight time to-market constraints. In this paper, we present a system level design approach for electronic circuits, utilizing the platform-based design (PBD paradigm as the natural framework for mixed-domain design formalization. In PBD, a meet-in-the-middle approach allows systematic exploration of the design space through a series of top-down mapping of system constraints onto component feasibility models in a platform library, which is based on bottom-up characterizations. In this framework, new designs can be assembled from the precharacterized library components, giving the highest priority to design reuse, correct assembly, and efficient design flow from specifications to implementation. We apply concepts from design centering to enforce robustness to modeling errors as well as process, voltage, and temperature variations, which are currently plaguing embedded system design in deep-submicron technologies. The effectiveness of our methodology is finally shown on the design of a pipeline A/D converter and two receiver front-ends for UMTS and UWB communications.

  15. Software and system development using virtual platforms full-system simulation with wind river simics

    CERN Document Server

    Aarno, Daniel

    2014-01-01

    Virtual platforms are finding widespread use in both pre- and post-silicon computer software and system development. They reduce time to market, improve system quality, make development more efficient, and enable truly concurrent hardware/software design and bring-up. Virtual platforms increase productivity with unparalleled inspection, configuration, and injection capabilities. In combination with other types of simulators, they provide full-system simulations where computer systems can be tested together with the environment in which they operate. This book is not only about what simulat

  16. Automatic aeroponic irrigation system based on Arduino’s platform

    Science.gov (United States)

    Montoya, A. P.; Obando, F. A.; Morales, J. G.; Vargas, G.

    2017-06-01

    The recirculating hydroponic culture techniques, as aeroponics, has several advantages over traditional agriculture, aimed to improve the efficiently and environmental impact of agriculture. These techniques require continuous monitoring and automation for proper operation. In this work was developed an automatic monitored aeroponic-irrigation system based on the Arduino’s free software platform. Analog and digital sensors for measuring the temperature, flow and level of a nutrient solution in a real greenhouse were implemented. In addition, the pH and electric conductivity of nutritive solutions are monitored using the Arduino’s differential configuration. The sensor network, the acquisition and automation system are managed by two Arduinos modules in master-slave configuration, which communicate one each other wireless by Wi-Fi. Further, data are stored in micro SD memories and the information is loaded on a web page in real time. The developed device brings important agronomic information when is tested with an arugula culture (Eruca sativa Mill). The system also could be employ as an early warning system to prevent irrigation malfunctions.

  17. System Reliability Assessment of Existing Jacket Platforms in Malaysian Waters

    OpenAIRE

    V.J. Kurian; M.C. Voon; M.M.A. Wahab; M.S. Liew

    2014-01-01

    Reliability of offshore platforms has become a very important issue in the Malaysian Oil and Gas Industry as, majority of the jacket platforms in Malaysian waters to date, have exceeded their design life. Reliability of a jacket platform can be assessed through reliability index and probability of failure. Conventional metocean consideration uses 100 year return period wave height associated with 100 year return period current velocity and wind speed. However, recent study shows that for Mala...

  18. Data-as-a-Service Platform for Delivering Healthy Lifestyle and Preventive Medicine: Concept and Structure of the DAPHNE Project.

    Science.gov (United States)

    Gibbons, Catherine; Bailador Del Pozo, Gonzalo; Andrés, Javier; Lobstein, Tim; Manco, Melania; Lewy, Hadas; Bergman, Einat; O'Callaghan, David; Doherty, Gavin; Kudrautseva, Olga; Palomares, Angel; Ram, Roni; Olmo, Alberto

    2016-12-09

    Overweight and obesity is related to many health problems and diseases. The current obesity epidemic, which is a major health problem, is closely related to a lack of physical activity, high levels of sedentary behavior, and increased energy intake; with evidence to show increasing incidence of these issues in the younger population. Tackling obesity and its comorbid conditions requires a holistic approach encompassing attention on physical activity, healthy diet, and behavioral activation in order to enable and maintain meaningful and long-term weight loss and weight maintenance. The objective of the Data-as-a-Service Platform for Healthy Lifestyle and Preventive Medicine (DAPHNE) project is to develop a breakthrough information communications technology (ICT) platform for tracking health, weight, physical activity, diet, lifestyle, and psychological components within health care systems, whereby the platform and clinical support is linked. The DAPHNE platform aims to deliver personalized guidance services for lifestyle management to the citizen/patient by means of (1) advanced sensors and mobile phone apps to acquire and store continuous/real-time data on lifestyle aspects, behavior, and surrounding environment; (2) individual models to monitor their health and fitness status; (3) intelligent data processing for the recognition of behavioral trends; and (4) specific services for personalized guidance on healthy lifestyle and disease prevention. It is well known that weight loss and maintenance of weight loss are particularly difficult. This tool will address some of the issues found with conventional treatment/advice in that it will collect data in real time, thereby reducing reliability issues known with recalling events once they have passed and will also allow adjustment of behavior through timely support and recommendations sent through the platform without the necessity of formal one-to-one visits between patient and clinician. Patient motivation

  19. Design of a quasi-zero-stiffness based sensor system for the measurement of absolute vibration displacement of moving platforms

    Science.gov (United States)

    Jing, Xingjian; Wang, Yu; Li, Quankun; Sun, Xiuting

    2016-09-01

    This study presents the analysis and design of a novel sensor system for measuring the absolute vibration displacement of moving platforms based on the concept of quasi-zero-stiffness (QZS). The sensor system is constructed using positive- and negative-stiffness springs, which make it possible to achieve an equivalent QZS and consequently to create a broadband vibration-free point for absolute vibration displacement measurement in moving platforms. Theoretical analysis is conducted for the analysis and design of the influence of structure parameters on system measurement performance. A prototype is designed which can avoid the drawback of instability in existing QZS systems with negative stiffness, and corresponding data-processing software is developed to fulfill time domain measurements. Both the simulation and experimental results verify the effectiveness of this novel sensor system.

  20. Control System Design of a DSP-based Real-time Leveling Platform

    Directory of Open Access Journals (Sweden)

    Zhang Jin Ming

    2016-01-01

    Full Text Available Since platform working in the sea is badly influenced by the wave, leveling control system is researched to control the leveling platform, so as to prevent the device which is fixed on the platform from being affected. TMS320F2812 chip is set as the control core, and serial communication module, gyroscope etc. are adopted to design real-time leveling control system. Gyroscopes are used to measure the angular speed of the carrier and the angle of the platform, filtering processing is done to the data collected by the gyroscopes and PID algorithm is adopted to calculate the real-time speed of motor ,in order to control the leveling platform. Tests are conducted to prove that the system can well control the leveling platform, in which the shake range of the platform is (-12°, +12°, while the shake range of carrier is only about (-0.5° +0.5 °.

  1. SAFARI optical system architecture and design concept

    Science.gov (United States)

    Pastor, Carmen; Jellema, Willem; Zuluaga-Ramírez, Pablo; Arrazola, David; Fernández-Rodriguez, M.; Belenguer, Tomás.; González Fernández, Luis M.; Audley, Michael D.; Evers, Jaap; Eggens, Martin; Torres Redondo, Josefina; Najarro, Francisco; Roelfsema, Peter

    2016-07-01

    SpicA FAR infrared Instrument, SAFARI, is one of the instruments planned for the SPICA mission. The SPICA mission is the next great leap forward in space-based far-infrared astronomy and will study the evolution of galaxies, stars and planetary systems. SPICA will utilize a deeply cooled 2.5m-class telescope, provided by European industry, to realize zodiacal background limited performance, and high spatial resolution. The instrument SAFARI is a cryogenic grating-based point source spectrometer working in the wavelength domain 34 to 230 μm, providing spectral resolving power from 300 to at least 2000. The instrument shall provide low and high resolution spectroscopy in four spectral bands. Low Resolution mode is the native instrument mode, while the high Resolution mode is achieved by means of a Martin-Pupplet interferometer. The optical system is all-reflective and consists of three main modules; an input optics module, followed by the Band and Mode Distributing Optics and the grating Modules. The instrument utilizes Nyquist sampled filled linear arrays of very sensitive TES detectors. The work presented in this paper describes the optical design architecture and design concept compatible with the current instrument performance and volume design drivers.

  2. The Bacterial Ghost platform system: production and applications.

    Science.gov (United States)

    Langemann, Timo; Koller, Verena Juliana; Muhammad, Abbas; Kudela, Pavol; Mayr, Ulrike Beate; Lubitz, Werner

    2010-01-01

    The Bacterial Ghost (BG) platform technology is an innovative system for vaccine, drug or active substance delivery and for technical applications in white biotechnology. BGs are cell envelopes derived from Gram-negative bacteria. BGs are devoid of all cytoplasmic content but have a preserved cellular morphology including all cell surface structures. Using BGs as delivery vehicles for subunit or DNA-vaccines the particle structure and surface properties of BGs are targeting the carrier itself to primary antigen-presenting cells. Furthermore, BGs exhibit intrinsic adjuvant properties and trigger an enhanced humoral and cellular immune response to the target antigen. Multiple antigens of the native BG envelope and recombinant protein or DNA antigens can be combined in a single type of BG. Antigens can be presented on the inner or outer membrane of the BG as well as in the periplasm that is sealed during BG formation. Drugs or supplements can also be loaded to the internal lumen or periplasmic space of the carrier. BGs are produced by batch fermentation with subsequent product recovery and purification via tangential flow filtration. For safety reasons all residual bacterial DNA is inactivated during the BG production process by the use of staphylococcal nuclease A and/or the treatment with β-propiolactone. After purification BGs can be stored long-term at ambient room temperature as lyophilized product. The production cycle from the inoculation of the pre-culture to the purified BG concentrate ready for lyophilization does not take longer than a day and thus meets modern criteria of rapid vaccine production rather than keeping large stocks of vaccines. The broad spectrum of possible applications in combination with the comparably low production costs make the BG platform technology a safe and sophisticated product for the targeted delivery of vaccines and active agents as well as carrier of immobilized enzymes for applications in white biotechnology.

  3. The concept of hierarchy in general systems theory.

    Science.gov (United States)

    Gasparski, W

    1994-01-01

    The paper reviews main ideas related to the concept of hierarchy as they are discussed in contemporary general systems theory. After presenting a dictionary definition of the concept, the author examines the intuitive idea of hierarchy quoting Mario Bunge's notion of level structure. Then relationship between two other concepts: a system and a hierarchy is characterised on the bases of Bowler's, Bunge's again, Klir's, and the author's studies. Finally, the paper is concluded that hierarchy is not an otological concept but epistemological one.

  4. Fake BTS Attacks of GSM System on Software Radio Platform

    Directory of Open Access Journals (Sweden)

    Yubo Song

    2012-02-01

    Full Text Available The 2G GSM communication system only provides one-way authentication mechanism which just authenticate the identities of mobile users. As we know, this is not resistant to fake BTS attack. But for the huge cost for building a fake BTS before, this kind of attack were not really implemented before. This paper presents an implement of fake BTS based on software radio technologies. Furthermore, this paper discusses two types of fake BTS attacks on our software radio platform. The first attack is IMSI/IMEI catch attack, which can get the mobile phone’s IMSI and IMEI. With this information, attacker can got the track of the man with this phone. The second attack is selective jamming attack. After get the IMSI and IMEI of the mobile phone, the attackers can decide whether the mobile phone is blocked or not. We will analyze the GSM protocol which is relevant to the interception system and later present the performance of such a system by real tests and demonstrate its feasibility.

  5. DSF: A Common Platform for Distributed Systems Research and Development

    Science.gov (United States)

    Tang, Chunqiang

    This paper presents Distributed Systems Foundation (DSF), a common platform for distributed systems research and development. It can run a distributed algorithm written in Java under multiple execution modes—simulation, massive multi-tenancy, and real deployment. DSF provides a set of novel features to facilitate testing and debugging, including chaotic timing test and time travel debugging with mutable replay. Unlike existing research prototypes that offer advanced debugging features by hacking programming tools, DSF is written entirely in Java, without modifications to any external tools such as JVM, Java runtime library, compiler, linker, system library, OS, or hypervisor. This simplicity stems from our goal of making DSF not only a research prototype but more importantly a production tool. Experiments show that DSF is efficient and easy to use. DSF's massive multi-tenancy mode can run 4,000 OS-level threads in a single JVM to concurrently execute (as opposed to simulate) 1,000 DHT nodes in real-time.

  6. Multi-Objective Design Space Exploration of Embedded System Platforms

    DEFF Research Database (Denmark)

    Madsen, Jan; Stidsen, Thomas K.; Kjærulff, Peter

    2006-01-01

    on local memory sizes and interface buffer sizes. Our approach allows for mapping onto a fixed platform or onto a flexible platform where architectural changes are explored during the mapping. We demonstrate our approach through an exploration of a smart phone, where five task graphs with a total of 530...

  7. Multi-Objective Design Space Exploration of Embedded System Platforms

    DEFF Research Database (Denmark)

    Madsen, Jan; Stidsen, Thomas K.; Kjærulff, Peter

    2006-01-01

    on local memory sizes and interface buffer sizes. Our approach allows for mapping onto a fixed platform or onto a flexible platform where architectural changes are explored during the mapping. We demonstrate our approach through an exploration of a smart phone, where five task graphs with a total of 530...

  8. Robust uncertainty evaluation for system identification on distributed wireless platforms

    Science.gov (United States)

    Crinière, Antoine; Döhler, Michael; Le Cam, Vincent; Mevel, Laurent

    2016-04-01

    Health monitoring of civil structures by system identification procedures from automatic control is now accepted as a valid approach. These methods provide frequencies and modeshapes from the structure over time. For a continuous monitoring the excitation of a structure is usually ambient, thus unknown and assumed to be noise. Hence, all estimates from the vibration measurements are realizations of random variables with inherent uncertainty due to (unknown) process and measurement noise and finite data length. The underlying algorithms are usually running under Matlab under the assumption of large memory pool and considerable computational power. Even under these premises, computational and memory usage are heavy and not realistic for being embedded in on-site sensor platforms such as the PEGASE platform. Moreover, the current push for distributed wireless systems calls for algorithmic adaptation for lowering data exchanges and maximizing local processing. Finally, the recent breakthrough in system identification allows us to process both frequency information and its related uncertainty together from one and only one data sequence, at the expense of computational and memory explosion that require even more careful attention than before. The current approach will focus on presenting a system identification procedure called multi-setup subspace identification that allows to process both frequencies and their related variances from a set of interconnected wireless systems with all computation running locally within the limited memory pool of each system before being merged on a host supervisor. Careful attention will be given to data exchanges and I/O satisfying OGC standards, as well as minimizing memory footprints and maximizing computational efficiency. Those systems are built in a way of autonomous operations on field and could be later included in a wide distributed architecture such as the Cloud2SM project. The usefulness of these strategies is illustrated on

  9. MPACT Fast Neutron Multiplicity System Design Concepts

    Energy Technology Data Exchange (ETDEWEB)

    D. L. Chichester; S. A. Pozzi; J. L. Dolan; M. T. Kinlaw; A. C. Kaplan; M. Flaska; A. Enqvist; J. T. Johnsom; S. M. Watson

    2012-10-01

    This report documents work performed by Idaho National Laboratory and the University of Michigan in fiscal year (FY) 2012 to examine design parameters related to the use of fast-neutron multiplicity counting for assaying plutonium for materials protection, accountancy, and control purposes. This project seeks to develop a new type of neutron-measurement-based plutonium assay instrument suited for assaying advanced fuel cycle materials. Some current-concept advanced fuels contain high concentrations of plutonium; some of these concept fuels also contain other fissionable actinides besides plutonium. Because of these attributes the neutron emission rates of these new fuels may be much higher, and more difficult to interpret, than measurements made of plutonium-only materials. Fast neutron multiplicity analysis is one approach for assaying these advanced nuclear fuels. Studies have been performed to assess the conceptual performance capabilities of a fast-neutron multiplicity counter for assaying plutonium. Comparisons have been made to evaluate the potential improvements and benefits of fast-neutron multiplicity analyses versus traditional thermal-neutron counting systems. Fast-neutron instrumentation, using for example an array of liquid scintillators such as EJ-309, have the potential to either a) significantly reduce assay measurement times versus traditional approaches, for comparable measurement precision values, b) significantly improve assay precision values, for measurement durations comparable to current-generation technology, or c) moderating improve both measurement precision and measurement durations versus current-generation technology. Using the MCNPX-PoliMi Monte Carlo simulation code, studies have been performed to assess the doubles-detection efficiency for a variety of counter layouts of cylindrical liquid scintillator detector cells over one, two, and three rows. Ignoring other considerations, the best detector design is the one with the most

  10. FUZZY CONTROLLER FOR THE CONTROL OF THE MOBILE PLATFORM OF THE CORBYS ROBOTIC GAIT REHABILITATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Maria Kyrarini

    2014-12-01

    Full Text Available In this paper, an inverse kinematics based control algorithm for the joystick control of the mobile platform of the novel mobile robot-assisted gait rehabilitation system CORBYS is presented. The mobile platform has four independently steered and driven wheels. Given the linear and angular velocities of the mobile platform, the inverse kinematics algorithm gives as its output the steering angle and the driving angular velocity of each of the four wheels. The paper is focused on the steering control of the platform for which a fuzzy logic controller is developed and implemented. The experimental results of the real-world steering of the platform are presented in the paper.

  11. An Adaptive Filtering System Configurations and Architecture on Reconfigurable Platform

    Directory of Open Access Journals (Sweden)

    Dipen B. Patel

    2014-03-01

    Full Text Available This paper proposed the implementation of adaptive filters on reconfigurable platform. Adaptive filter is an essential part of digital signal systems, have been widely used and its implementation takes a great deal, there is no dedicated IC for adaptive filter. When FPGA implemented in such area, provides a lot of facilities to the designers and also offer a better solution for filtering the data. Adaptive signal processing evolved from the techniques developed to enable the adaptive control of time- varying systems. Filtering data in real-time requires dedicated hardware to meet demanding time requirements and provide the highest processing performance, but is inflexible for changes. When a design demands the use of a DSP, design adaptability is crucial, then FPGA may offer a better solution. Reconfigurable hardware devices offer both the flexibility of computer software, and the ability to construct custom high performance computing circuits. Adaptive filter implemented using Field Programmable Gate Arrays (FPGAs due to some of their attractive advantages include flexibility and programmability, availability of tens to hundreds of hardware multipliers available on a chip. Keywords -

  12. An experimental platform for systemic drug delivery to the retina.

    LENUS (Irish Health Repository)

    Campbell, Matthew

    2009-10-20

    Degenerative retinopathies, including age-related macular degeneration, diabetic retinopathy, and hereditary retinal disorders--major causes of world blindness--are potentially treatable by using low-molecular weight neuroprotective, antiapoptotic, or antineovascular drugs. These agents are, however, not in current systemic use owing to, among other factors, their inability to passively diffuse across the microvasculature of the retina because of the presence of the inner blood-retina barrier (iBRB). Moreover, preclinical assessment of the efficacies of new formulations in the treatment of such conditions is similarly compromised. We describe here an experimental process for RNAi-mediated, size-selective, transient, and reversible modulation of the iBRB in mice to molecules up to 800 Da by suppression of transcripts encoding claudin-5, a protein component of the tight junctions of the inner retinal vasculature. MRI produced no evidence indicative of brain or retinal edema, and the process resulted in minimal disturbance of global transcriptional patterns analyzed in neuronal tissue. We show that visual function can be improved in IMPDH1(-\\/-) mice, a model of autosomal recessive retinitis pigmentosa, and that the rate of photoreceptor cell death can be reduced in a model of light-induced retinal degeneration by systemic drug delivery after reversible barrier opening. These findings provide a platform for high-throughput drug screening in models of retinal degeneration, and they ultimately could result in the development of a novel "humanized" approach to therapy for conditions with little or no current forms of treatment.

  13. A study on an information security system of a regional collaborative medical platform.

    Science.gov (United States)

    Zhao, Junping; Peng, Kun; Leng, Jinchang; Sun, Xiaowei; Zhang, Zhenjiang; Xue, Wanguo; Ren, Lianzhong

    2010-01-01

    The objective of this study was to share the experience of building an information security system for a regional collaborative medical platform (RCMP) and discuss the lessons learned from practical projects. Safety measures are analyzed from the perspective of system engineering. We present the essential requirements, critical architectures, and policies for system security of regional collaborative medical platforms.

  14. Aero-hydro-elastic simulation platform for wave energy systems and floating wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Kallesoee, B.S.

    2011-01-15

    This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world's first combined wave and wind energy platform. The floating energy conversion platform, Poseidon, is owned and operated by Floating Power Plant A/S. The platform has been operating for two test periods; one period where it was operating as a wave energy conversion platform only and one period where the three turbines was mounted and the platform operated as a combined wind and wave energy platform. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the first test period has been used for determine if the turbine could be mounted on the platform. Preliminary analysis of data from the second test period indicates that the platform is suitable as wind turbine foundation and that the turbines reduce the platform motion. (Author)

  15. Pi-Sat: A Low Cost Small Satellite and Distributed Spacecraft Mission System Test Platform

    Science.gov (United States)

    Cudmore, Alan

    2015-01-01

    Current technology and budget trends indicate a shift in satellite architectures from large, expensive single satellite missions, to small, low cost distributed spacecraft missions. At the center of this shift is the SmallSatCubesat architecture. The primary goal of the Pi-Sat project is to create a low cost, and easy to use Distributed Spacecraft Mission (DSM) test bed to facilitate the research and development of next-generation DSM technologies and concepts. This test bed also serves as a realistic software development platform for Small Satellite and Cubesat architectures. The Pi-Sat is based on the popular $35 Raspberry Pi single board computer featuring a 700Mhz ARM processor, 512MB of RAM, a flash memory card, and a wealth of IO options. The Raspberry Pi runs the Linux operating system and can easily run Code 582s Core Flight System flight software architecture. The low cost and high availability of the Raspberry Pi make it an ideal platform for a Distributed Spacecraft Mission and Cubesat software development. The Pi-Sat models currently include a Pi-Sat 1U Cube, a Pi-Sat Wireless Node, and a Pi-Sat Cubesat processor card.The Pi-Sat project takes advantage of many popular trends in the Maker community including low cost electronics, 3d printing, and rapid prototyping in order to provide a realistic platform for flight software testing, training, and technology development. The Pi-Sat has also provided fantastic hands on training opportunities for NASA summer interns and Pathways students.

  16. Using Instant Messaging Systems as a Platform for Electronic Voting

    Science.gov (United States)

    Meletiadou, Anastasia; Grimm, Rüdiger

    Many Instant Messaging (IM) systems like Skype or Spark offer ex tended services such as file sharing, VoIP, or a shared whiteboard. As the name suggests, IM applications are predominantly used for spontaneous text-based communication for private or business purposes. In this paper we explore their potential to serve as platforms for secure collaborative applications like electronic contract negotiation, e-payment or electronic voting. Such applications have to deal with challenges like time constraints (“instant” com munication is desired), integration of media channels and the absence of one uni fying “sphere of control” covering all participants. In this paper, we address these challenges by discussing one particular secure collaborative application: secure decision processes for small groups. We provide the following contribu tions: (1) we define three varying scenarios and corresponding security require ments (2) we present an IM-based architecture implementing these scenarios, in cluding a Video-based authentication mechanism, and (3) we discuss poten tial attack patterns.

  17. Decoding depositional sequences in carbonate systems: Concepts vs experience

    Science.gov (United States)

    Pomar, Luis; Haq, Bilal U.

    2016-11-01

    Efficacy of sequence stratigraphic concepts in siliciclastic systems has been proven by successful applications in both academia and the industry over the past four decades. However, experience has demonstrated repeatedly that the relatively simple advective transportational approach of these models is less than successful when applied to the more complex carbonate systems and can lead to erroneous interpretations. Instead, an approach that includes the use of the changes in the biotic components of carbonate deposits to infer the sea-level trajectory and thereby placing it in the proper sequence framework is deemed to be more meaningful. This is exemplified with several well-studied examples that illustrate the variety of ways in which the biotic components can build carbonate platforms, and how these have changed through the ages prompted by biological evolution. This extended review discusses carbonate production, source to sink transportation influenced by sea-level changes, surface waves, as well as the less understood and under-appreciated internal waves, and the resulting variety of platforms that can be built by the interaction of these factors, as well as the changing patterns of biotic components with time. Their effect on the carbonate reservoir is considerable, understanding of which is the ultimate objective of carbonate research for applications in the industry. Key elements in the carbonate environments that differ from the siliciclastic systems are: 1) intrabasinal conditions (nutrients, salinity, temperature, water energy, transparency) are important controls on carbonate production and therefore also control in-situ accommodation and how it may be filled; 2) depositional accommodation can be both physical (controlled by hydrodynamics) and ecological (in the building-up above the base level mode); 3) because carbonates are products of biological activity, their production modes have been changing with time as their biotic components have evolved; 4

  18. Reference concepts for a space-based hydrogen-oxygen combustion, turboalternator, burst power system

    Energy Technology Data Exchange (ETDEWEB)

    Edenburn, M.W.

    1990-07-01

    This report describes reference concepts for a hydrogen-oxygen combustion, turboalternator power system that supplies power during battle engagement to a space-based, ballistic missile defense platform. All of the concepts are open''; that is, they exhaust hydrogen or a mixture of hydrogen and water vapor into space. We considered the situation where hydrogen is presumed to be free to the power system because it is also needed to cool the platform's weapon and the situation where hydrogen is not free and its mass must be added to that of the power system. We also considered the situation where water vapor is an acceptable exhaust and the situation where it is not. The combination of these two sets of situations required four different power generation systems, and this report describes each, suggests parameter values, and estimates masses for each of the four. These reference concepts are expected to serve as a baseline'' to which other types of power systems can be compared, and they are expected to help guide technology development efforts in that they suggest parameter value ranges that will lead to optimum system designs. 7 refs., 18 figs., 5 tabs.

  19. G-DOC: A Systems Medicine Platform for Personalized Oncology

    Directory of Open Access Journals (Sweden)

    Subha Madhavan

    2011-09-01

    Full Text Available Currently, cancer therapy remains limited by a “one-size-fits-all” approach, whereby treatment decisions are based mainly on the clinical stage of disease, yet fail to reference the individual's underlying biology and its role driving malignancy. Identifying better personalized therapies for cancer treatment is hindered by the lack of high-quality “omics” data of sufficient size to produce meaningful results and the ability to integrate biomedical data from disparate technologies. Resolving these issues will help translation of therapies from research to clinic by helping clinicians develop patient-specific treatments based on the unique signatures of patient's tumor. Here we describe the Georgetown Database of Cancer (G-DOC, a Web platform that enables basic and clinical research by integrating patient characteristics and clinical outcome data with a variety of high-throughput research data in a unified environment. While several rich data repositories for high-dimensional research data exist in the public domain, most focus on a single-data type and do not support integration across multiple technologies. Currently, G-DOC contains data from more than 2500 breast cancer patients and 800 gastrointestinal cancer patients, G-DOC includes a broad collection of bioinformatics and systems biology tools for analysis and visualization of four major “omics” types: DNA, mRNA, microRNA, and metabolites. We believe that G-DOC will help facilitate systems medicine by providing identification of trends and patterns in integrated data sets and hence facilitate the use of better targeted therapies for cancer. A set of representative usage scenarios is provided to highlight the technical capabilities of this resource.

  20. An e-Health Platform for the Elderly Population: The Butler System

    Science.gov (United States)

    Etchemendy, E.; Banos, R. M.; Botella, C.; Castilla, D.; Alcaniz, M.; Rasal, P.; Farfallini, L.

    2011-01-01

    The Butler system is an e-health platform designed to improve the elderly population's quality of life. The Butler system has three applications diagnostic, therapeutic and playful. The objective of this work is to present the influence of the use of the platform on elderly users' mood states and the degree of acceptance. These measures were…

  1. The development of a computational platform to design and simulate on-board hydrogen storage systems

    DEFF Research Database (Denmark)

    Mazzucco, Andrea; Rokni, Masoud

    2017-01-01

    the vehicular tank within the frame of a complete refueling system. The two technologies that are integrated in the platform are solid-state hydrogen storage in the form of metal hydrides and compressed gas systems. In this work the computational platform is used to compare the storage performance of two tank...

  2. ON-LINE PLATFORM FOR COMPETENCES DEVELOPMENT IN CORPORATE EDUCATIONAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    L. G. Andreeva

    2016-01-01

    Full Text Available The aim of the study is to present the model of interaction of university and business corporations in uniform information and educational space, which consists of the uniform requirements to the contents and quality of education and requirements of science; education and business are equally satisfied.Methods. The methods involve summing up the results of the national and international researchers’ findings on the problem of vocational pedagogical education; methods of expert survey and system analysis.Results. The information research results disclosing the drawbacks of the existing online-education technologies are presented. There is also a presentation of online-platform concept «The University of the 3rd Millennium» where modern university is considered as a service provider responsible for corporate education. Outsourcing will allow the companies to cut their expenses on employee education programs, while universities will accumulate additional resources by means of developing and selling innovative educational products. The additional funds will enable the university to carry out scientific research, to effectively implement post graduates’ employment programs, to introduce innovations.Scientific novelty. The authors define «as is» competences, which the university must have to launch this online-platform project, and «as to be» competences, which every university is to master to successfully implement the project. Internal high-risk systemic tensions and external challenges facing the platform are defined; strategic matrix of their intersection is developed. The latter allowed the authors to specify essential tasks which demand solution within the project. There is also a description of interconnection of the defined tasks with the «as to be» competences, and a Canvas model of the suggested online platform.Practical significance: The authors of the article propose the model of business and education interaction, within which

  3. Design Concepts and Preclinical Results of a Miniaturized HeartWare Platform

    Science.gov (United States)

    Cheung, Anson; Chorpenning, Katherine; Tamez, Daniel; Shambaugh, Charles; Dierlam, Anne E.; Taskin, M. Ertan; Ashenuga, Michael; Reyes, Carlos; LaRose, Jeffrey A.

    2015-01-01

    Objective Ventricular assist device (VAD) miniaturization is one design trend that may result in less-invasive implantation techniques and more versatility with patient selection. The MVAD System is a miniature, continuous-flow device implanted in the ventricle. The pump is capable of delivering between 0 and 7 L/min of flow at a mean arterial pressure of 75 mm Hg. The impeller was optimized from its original design to improve hydraulic performance, minimize shear regions, and enhance the impeller’s radial stiffness. These studies evaluated the MVAD System with modified impeller in the preclinical setting. Methods This modified pump design was tested through chronic studies (n = 6) in a healthy ovine model where 4 animals were implanted for a duration of 30 ± 5 days and 2 animals were implanted for a duration of 90 ± 5 days. The pump was placed in the left ventricular apex with the outflow graft anastomosed to the descending aorta. Postoperatively, no anticoagulant or antiplatelet therapies were administered throughout the study duration. Results All 6 animals reached their elective date of kill, demonstrating no evidence of organ compromise or device-related complications. Average pump parameters did not deviate significantly, and average rotational speed, pump flow, and power consumption were 14095 ± 139 RPM, 4.1 ± 0.4 L/min, and 4.3 ± 0.1 W, respectively. Examination of pump components postexplant demonstrated no mechanical wear or thrombus formation. Conclusions Hemocompatibility and biocompatibility of the modified MVAD System were demonstrated through pump parameters, blood chemistry panels, and histopathology analysis. PMID:26098174

  4. Bispecific Antibodies as a Development Platform for New Concepts and Treatment Strategies

    Directory of Open Access Journals (Sweden)

    Fa Yang

    2016-12-01

    Full Text Available With the development of molecular cloning technology and the deep understanding of antibody engineering, there are diverse bispecific antibody formats from which to choose to pursue the optimal biological activity and clinical purpose. The single-chain-based bispecific antibodies usually bridge tumor cells with immune cells and form an immunological synapse because of their relatively small size. Bispecific antibodies in the IgG format include asymmetric bispecific antibodies and homodimerized bispecific antibodies, all of which have an extended blood half-life and their own crystalline fragment (Fc-mediated functions. Besides retargeting effector cells to the site of cancer, new applications were established for bispecific antibodies. Bispecific antibodies that can simultaneously bind to cell surface antigens and payloads are a very ideal delivery system for therapeutic use. Bispecific antibodies that can inhibit two correlated signaling molecules at the same time can be developed to overcome inherent or acquired resistance and to be more efficient angiogenesis inhibitors. Bispecific antibodies can also be used to treat hemophilia A by mimicking the function of factor VIII. Bispecific antibodies also have broad application prospects in bone disorders and infections and diseases of the central nervous system. The latest developments of the formats and application of bispecific antibodies will be reviewed. Furthermore, the challenges and perspectives are summarized in this review.

  5. Task Characterisation and Cross-Platform Programming Through System Identification

    Directory of Open Access Journals (Sweden)

    Roberto Iglesias

    2008-11-01

    Full Text Available Developing robust and reliable control code for autonomous mobile robots is difficult, because the interaction between a physical robot and the environment is highly complex, it is subject to noise and variation, and therefore partly unpredictable. This means that to date it is not possible to predict robot behaviour, based on theoretical models. Instead, current methods to develop robot control code still require a substantial trial-and-error component to the software design process. Such iterative refinement could be reduced, we argue, if a more profound theoretical understanding of robot-environment interaction existed. In this paper, we therefore present a modelling method that generates a faithful model of a robot's interaction with its environment, based on data logged while observing a physical robot's behaviour. Because this modelling method - nonlinear modelling using polynomials - is commonly used in the engineering discipline of system identification, we refer to it here as "robot identification". We show in this paper that using robot identification to obtain a computer model of robot environment interaction offers several distinct advantages:
    1. Very compact representations (one-line programs of the robot control program are generated
    2.The model can be analysed, for example through sensitivity analysis, leading to a better understanding of the essential parameters underlying the robot's behaviour, and
    3. The generated, compact robot code can be used for cross-platform robot programming, allowing fast transfer of robot code from one type of robot to another.
    We demonstrate these points through experiments with a Magellan Pro and a Nomad 200 mobile robot.

  6. OTEC platform configuration and integration study. Volume I. Systems engineering and integration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The economic success of an Ocean Thermal Energy Conversion (OTEC) system is highly dependent on a platform which provides adequate support for the power system, accommodates reliably the cold water pipe, and is most cost effective. The results of a study conducted for the Department of Energy to assess six generic types of platforms to determine the most satisfactory platform for severl potential sites are presented. The six platform configurations are ship, circular barge, semi-submersible, Tuned Sphere, submersible, and spar. These represent directional and symmetric types of platforms which operate on the surface, at the interface, and submerged. The five sites for this study were primarily New Orleans, Keahole Point (Hawaii), Brazil, and secondarily Key West and Puerto Rico. Electrical transmission of energy by submarine cable is the planned form of energy transmission for all sites except Brazil, where chemical conversion is to be the method of transmission. This study is devoted to the platform (or ocean systems) of the OTEC plant which is chiefly comprised of the hull and structure, the seawater system, the position control system, and miscellaneous support/assembly systems. The principal elements in the work breakdown structure for the commercial plants are presented. The assessment of the six platform configurations was conducted utilizing a baseline plan (100-MW(e) (Net)) and site (New Orleans) with variations from the baseline to cover the range of interested platforms and sites.

  7. Phase control system concepts and simulations. [solar power satellite system

    Science.gov (United States)

    Lindsay, V. C.

    1980-01-01

    A phase control system concept for a solar power satellite is proposed which partitions the system into three major levels. The first level of phase control consists of a reference phase distribution system implemented in the form of phase distribution tree structure. The major purpose of the tree structure is to electronically compensate for the phase shift due to the transition path lengths from the center of the spacetenna to each phase control center located in each subarray. In the reference system, this is accomplished using the master slave returnable timing system technique. The second level of phase control consists of the beam steering and microwave power generating system which houses the power transponders. This transponder consists of a set of phase conjugation multipliers driven by the reference phase distribution system output and the output of a pilot spread spectrum receiver which accepts the received pilot via a diplexer connected to a separate receive horn or the subarray itself. The output of the phase conjugation circuits serve as inputs to the third level of the phase control system. The third level of phase control is associated with maintaining an equal and constant phase shift through the microwave power amplifier devices while minimizing the associated phase noise effects on the generated power beam. This is accomplished by providing a phase locked loop around each high power amplifier.

  8. ANALYSIS AND CONCEPTION DEVELOPMENT OF INFORMATION DEFENSE CID AND CLOUD PLATFORM ON THE BASE OF INTELLIGENCE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    V. A. Vishniakov

    2014-01-01

    Full Text Available Two problems the use of intelligence technologies in information defense (ITID – creating specialized knowledge bases with threats simulation and high the security level in corporative nets and cloud computing are presented. The analysis of t wo directions of the second ITID problem: the intelligence decision support systems and the malt y-agent system use are given. As trends and conception development of intelligence technologies are the perfection of methods. models, architectures, and hard-sot ware tools for ITID in corporative systems and cloud computing.

  9. Bridging the gap between PAT concepts and implementation: An integrated software platform for fermentation.

    Science.gov (United States)

    Chopda, Viki R; Gomes, James; Rathore, Anurag S

    2016-01-01

    Bioreactor control significantly impacts both the amount and quality of the product being manufactured. The complexity of the control strategy that is implemented increases with reactor size, which may vary from thousands to tens of thousands of litres in commercial manufacturing. The Process Analytical Technology (PAT) initiative has highlighted the need for having robust monitoring tools and effective control schemes that are capable of taking real time information about the critical quality attributes (CQA) and the critical process parameters (CPP) and executing immediate response as soon as a deviation occurs. However, the limited flexibility that present commercial software packages offer creates a hurdle. Visual programming environments have gradually emerged as potential alternatives to the available text based languages. This paper showcases development of an integrated programme using a visual programming environment for a Sartorius BIOSTAT® B Plus 5L bioreactor through which various peripheral devices are interfaced. The proposed programme facilitates real-time access to data and allows for execution of control actions to follow the desired trajectory. Major benefits of such integrated software system include: (i) improved real time monitoring and control; (ii) reduced variability; (iii) improved performance; (iv) reduced operator-training time; (v) enhanced knowledge management; and (vi) easier PAT implementation.

  10. Concept Study of Foundation Systems for Wave Energy Converters

    DEFF Research Database (Denmark)

    Molina, Salvador Devant; Vaitkunaite, Evelina; Ibsen, Lars Bo

    Analysis of possible foundation solution for Wave Energy Converters (WEC) is presented by investigating and optimizing novel foundation systems recently developed for offshore wind turbines. Gravity based, pile and bucket foundations are innovative foundation systems that are analyzed. Concept...

  11. Building a test platform for agents in power system control: Experience from SYSLAB

    DEFF Research Database (Denmark)

    Gehrke, Oliver; Bindner, Henrik W.

    2007-01-01

    -level simulation tools and the high risk of tests on a real-world power grid create a need for small, experimental grids on which new control concepts can be safely tested and demonstrated. In order to accommodate a wide range of possible control structures, the controller platform on such grids needs...

  12. A software platform to develop and execute kitting tasks on industrial cyber-physical systems

    DEFF Research Database (Denmark)

    Rovida, Francesco

    2017-01-01

    ) to receive kitting orders and finally executes and monitors the skills to accomplish the orders. The platform is the foundation and guideline of a concept that in the future could completely revolutionize the robot industries, similarly to how iOS and android revolutionized the industry of smart phones...

  13. A service platform architecture design towards a light integration of heterogeneous systems in the wellbeing domain.

    Science.gov (United States)

    Yang, Yaojin; Ahtinen, Aino; Lahteenmaki, Jaakko; Nyman, Petri; Paajanen, Henrik; Peltoniemi, Teijo; Quiroz, Carlos

    2007-01-01

    System integration is one of the major challenges for building wellbeing or healthcare related information systems. In this paper, we are going to share our experiences on how to design a service platform called Nuadu service platform, for providing integrated services in occupational health promotion and health risk management through two heterogeneous systems. Our design aims for a light integration covering the layers, from data through service up to presentation, while maintaining the integrity of the underlying systems.

  14. Development of a control system for a pair of robotic platforms. Thesis

    Science.gov (United States)

    Cosentino, James L.

    1990-01-01

    This thesis is a discussion of the development of a control system for a pair of three-degree-of-freedom robotic platforms. The platform system and its computer support are described at both the hardware and the software levels, including a section detailing diagnostics which can be run in the event of specific system errors. The design and implementation of a PID controller for the platforms based on experimentally-determined system dynamics is described. Finally, the tracking performance of each joint controller is examined. A path planner is used to map a smooth trajectory between starting and destination positions, and the controller's tracking ability is observed along this path.

  15. Complex products and systems: Potential from using layout platforms

    NARCIS (Netherlands)

    Hofer, Adrian P.; Halman, Johannes I.M.

    2004-01-01

    In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates t

  16. Complex products and systems: potential from using lay out platforms

    NARCIS (Netherlands)

    Halman, Johannes I.M.; Hofer, Adrian P.

    2004-01-01

    In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates

  17. Development of an E-Learning Platform for Vocational Education Systems in Germany

    Science.gov (United States)

    Schober, Andreas; Müller, Frederik; Linden, Sabine; Klois, Martha; Künne, Bernd

    2014-01-01

    This paper describes an existing web-based learning platform named "Third Place of Learning" (TPL)--"Dritter Lernort". This project's aim is to connect the system of vocational education with digital media by a web-based learning platform. TPL supports student's digital learning by means of interactive examples and exercises.…

  18. An Integrated Platform for Dynamic Software Updating and its Application in Self-* systems

    DEFF Research Database (Denmark)

    Gregersen, Allan Raundahl; Jørgensen, Bo Nørregaard; Hadaytullah

    2012-01-01

    frameworks, component systems and application servers, Javeleon currently provides tight integration with the NetBeans Platform, facilitating dynamic updating for applications built on top of the NetBeans Platform in an unconstrained manner. Javeleon supports state-preserving unanticipated runtime evolution...

  19. Humidifying system design of PEMFC test platform based on the mixture of dry and wet air

    Directory of Open Access Journals (Sweden)

    Tiancai Ma

    2015-01-01

    Full Text Available Based on the present humidifying system of PEMFC test platform, a novel design based on dry and wet air mixture is proposed. Key parameters are calculated, and test platform is built. Three experiments are implemented to test the performance of proposed design. Results show that the new design can meet the requirements, and realize the quick response and accurate control.

  20. Evaluation of Global Positioning System Data for Offshore Platform Deformation

    Directory of Open Access Journals (Sweden)

    Abdul N. Matori

    2011-01-01

    Full Text Available Problem statement: Reservoir compaction and shallow gas migration phenomena may cause offshore platform to experience deformation which if happens excessively will affect their structural integrity. Approach: Hence it is crucial to monitor and quantify the magnitude of the deformation especially if they are not uniform throughout the platform structure. However since mostly the offshore platforms are few hundreds kilometers away from shore, the precise monitoring of their deformation is limited to very few sophisticated instruments, in which GPS technology is one of them albeit using very special GPS data processing technique such as Long Baseline Relative Positioning. Results: Using this technique and employing GPS data observed on one of PETRONAS own platform, Pulai, its deformation magnitude will be determined with various options such as number of reference stations used, configuration and their geographic location. This study presents initial deformation processing result using scientific software GAMIT/GLOBK and their analysis utilizing postfit nrms and chi-squared statistics. The result indicated that for the period of two months there was displacement as big as 0.0094 m with standard deviation of 0.0106 m. However following congruency statistical test using t-student distribution with 95% confidence level, indicated that this displacement is insignificance. Analysis of the output result with postfit nrms also indicated that the data were of good quality, the processing procedure was correct and the output for each processing epoch is internally and externally consistent. Conclusion/Recommendations: It could be concluded with correct data processing strategy GPS data could be used to determine deformation magnitude which consequently could be utilized as input to assess structural integrity of an offshore platform.

  1. 15 – Document Management System Conceptions

    OpenAIRE

    Dhwanil

    2010-01-01

    Document management system is a method of organizing and storing documents electronically on one computer system or various computer systems. This system keeps track of the history of the document thereby enabling users to cognise the creation date, modification date, deletion date and other operations performed on document. Document management systems help users to easily find and share information. These systems are generally used by organizations to maintain their official records.

  2. Cell illustrator 4.0: a computational platform for systems biology.

    Science.gov (United States)

    Nagasaki, Masao; Saito, Ayumu; Jeong, Euna; Li, Chen; Kojima, Kaname; Ikeda, Emi; Miyano, Satoru

    2011-01-01

    Cell Illustrator is a software platform for Systems Biology that uses the concept of Petri net for modeling and simulating biopathways. It is intended for biological scientists working at bench. The latest version of Cell Illustrator 4.0 uses Java Web Start technology and is enhanced with new capabilities, including: automatic graph grid layout algorithms using ontology information; tools using Cell System Markup Language (CSML) 3.0 and Cell System Ontology 3.0; parameter search module; high-performance simulation module; CSML database management system; conversion from CSML model to programming languages (FORTRAN, C, C++, Java, Python and Perl); import from SBML, CellML, and BioPAX; and, export to SVG and HTML. Cell Illustrator employs an extension of hybrid Petri net in an object-oriented style so that biopathway models can include objects such as DNA sequence, molecular density, 3D localization information, transcription with frame-shift, translation with codon table, as well as biochemical reactions.

  3. Design and Development of Power Management System of Unmanned Underwater Platform for Defence Application

    Directory of Open Access Journals (Sweden)

    Arun Kumar

    2016-12-01

    Full Text Available Development of underwater weapon systems for defence application are carried out on unmanned underwater platform. Extensive testing and measurement of physical parameters are carried out during development phase trials. After several trials, system is qualified and installed on the actual platform. Mostly battery bank is used to power the unmanned platform. Design and development of power management system is an important issue of underwater platform to increase the underwater time of the platform. During development trials some additional equipments are also included for which power requirement was not considered during design of battery bank. This also becomes an issue to manage the power requirement of additional equipment beyond the design capability of the battery bank. Unmanned submersible platforms at a depth of 50 m to 70 m are used during development of underwater missile. Platform houses the missile to be tested, equipment required for missile launch and control of the platform. A power management system (PMS with redundancy and fault tolerant features achieving reliability figure of 99 per cent has been designed, developed and tested successfully for underwater phase of missile launch. The system allows remote operation of individual or group of equipment, current monitoring, and isolation of faulty equipment. Power requirement for additional equipment on platform is also included in PMS without affecting the reliability of the system. Power control of equipment on requirement basis to save battery power, to increase underwater time of platform and to manage additional power requirement beyond the designed capacity of the battery bank is described in detail.

  4. Multi-Agent System for Mission and Situational Awareness Management (MASAM) for Airborne Platforms

    Science.gov (United States)

    2003-01-01

    UNCLASSIFIED MULTI - AGENT SYSTEM FOR MISSION AND SITUATIONAL AWARENESS MANAGEMENT (MASAM) FOR AIRBORNE PLATFORMS (U) John C. Sciortino, Jr...TYPE 3. DATES COVERED 00-00-2003 to 00-00-2003 4. TITLE AND SUBTITLE Multi - Agent System for Mission and Situational Awareness Management (MASAM...Parameters Platform Figure 3: (U) Multi - Agent System for Mission and Situational Awareness Management (Left Panel). Use of CoABS Grid (Right Panel

  5. A Perspective on Implementing a Quantitative Systems Pharmacology Platform for Drug Discovery and the Advancement of Personalized Medicine

    Science.gov (United States)

    Stern, Andrew M.; Schurdak, Mark E.; Bahar, Ivet; Berg, Jeremy M.; Taylor, D. Lansing

    2016-01-01

    Drug candidates exhibiting well-defined pharmacokinetic and pharmacodynamic profiles that are otherwise safe often fail to demonstrate proof-of-concept in phase II and III trials. Innovation in drug discovery and development has been identified as a critical need for improving the efficiency of drug discovery, especially through collaborations between academia, government agencies, and industry. To address the innovation challenge, we describe a comprehensive, unbiased, integrated, and iterative quantitative systems pharmacology (QSP)–driven drug discovery and development strategy and platform that we have implemented at the University of Pittsburgh Drug Discovery Institute. Intrinsic to QSP is its integrated use of multiscale experimental and computational methods to identify mechanisms of disease progression and to test predicted therapeutic strategies likely to achieve clinical validation for appropriate subpopulations of patients. The QSP platform can address biological heterogeneity and anticipate the evolution of resistance mechanisms, which are major challenges for drug development. The implementation of this platform is dedicated to gaining an understanding of mechanism(s) of disease progression to enable the identification of novel therapeutic strategies as well as repurposing drugs. The QSP platform will help promote the paradigm shift from reactive population-based medicine to proactive personalized medicine by focusing on the patient as the starting and the end point. PMID:26962875

  6. The Theoretical and Methodological Platform for Developing a System of Enterprise Adaptation to Changes in the External Environment

    Directory of Open Access Journals (Sweden)

    Sokolova Lyudmila V.

    2016-08-01

    Full Text Available The aim of the article is the elaboration of an approach to creation of a theoretical and methodological platform for developing a system of enterprise adaptation to the rapid changes in the external environment, the modern active challenges of the markets. The attention is focused on the fact that the ability of industrial enterprises to respond flexibly to the external environment instability is realized through their adaptation system, the development of which should be based on an appropriate theoretical and methodological platform. The conducted retrospective analysis of the evolution of scientific thought on solving problems of enterprise adaptation allowed making the conclusion that still there is no agreed view of scientists on the scientific basis for the development of an adequate system for adaptation of industrial enterprises. There has been suggested an approach to developing a theoretical and methodological platform of the process of industrial enterprises’ adaptation as a targeted set of basic concepts, principles, theories, scientific methods, models, laws and categories, oriented towards the elaboration of an appropriate organizational and economic system.

  7. REopt: A Platform for Energy System Integration and Optimization: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Simpkins, T.; Cutler, D.; Anderson, K.; Olis, D.; Elgqvist, E.; Callahan, M.; Walker, A.

    2014-08-01

    REopt is NREL's energy planning platform offering concurrent, multi-technology integration and optimization capabilities to help clients meet their cost savings and energy performance goals. The REopt platform provides techno-economic decision-support analysis throughout the energy planning process, from agency-level screening and macro planning to project development to energy asset operation. REopt employs an integrated approach to optimizing a site?s energy costs by considering electricity and thermal consumption, resource availability, complex tariff structures including time-of-use, demand and sell-back rates, incentives, net-metering, and interconnection limits. Formulated as a mixed integer linear program, REopt recommends an optimally-sized mix of conventional and renewable energy, and energy storage technologies; estimates the net present value associated with implementing those technologies; and provides the cost-optimal dispatch strategy for operating them at maximum economic efficiency. The REopt platform can be customized to address a variety of energy optimization scenarios including policy, microgrid, and operational energy applications. This paper presents the REopt techno-economic model along with two examples of recently completed analysis projects.

  8. REACTOR - a Concept for establishing a System-of-Systems

    Science.gov (United States)

    Haener, Rainer; Hammitzsch, Martin; Wächter, Joachim

    2014-05-01

    well suited to establish brokers, which mediate metadata and semantic information about the resources of all involved systems. This concept has been developed within the project Collaborative, Complex, and Critical Decision-Support in Evolving Crises (TRIDEC) on the basis of semantic registries describing all facets of events and services utilisable for crisis management systems. The implementation utilises an operative infrastructure including an Enterprise Service Bus (ESB), adapters to proprietary sensor systems, a workflow engine, and a broker-based MOM. It also applies current technologies like actor-based frameworks for highly concurrent, distributed, and fault tolerant event-driven applications. Therefore REACTOR implementations are well suited to be hosted in a cloud that provides Infrastructure as a Service (IaaS). To provide low entry barriers for legacy and future systems, REACTOR adapts the principles of Design by Contract (DbC) as well as standardised and common information models like the Sensor Web Enablement (SWE) or the JavaScript Object Notation for geographic features (GeoJSON). REACTOR has been applied exemplarily within two different scenarios, Natural Crisis Management and Industrial Subsurface Development.

  9. Platform Constellations

    DEFF Research Database (Denmark)

    Staykova, Kalina Stefanova; Damsgaard, Jan

    2016-01-01

    This research paper presents an initial attempt to introduce and explain the emergence of new phenomenon, which we refer to as platform constellations. Functioning as highly modular systems, the platform constellations are collections of highly connected platforms which co-exist in parallel...... and as such allow us to study platforms not only as separate entities, but also to investigate the relationship between several platforms offered and governed by one and the same platform provider. By investigating two case studies of indigenous platform constellations formed around the hugely popular instant...... messaging apps KakaoTalk and LINE, we are able to gain valuable insights about the nature of these new constructions and to capture and synthesize their main characteristics in a framework. Our results show that platform constellations possess unique innovative capabilities, which can improve users...

  10. Concepts for a global resources information system

    Science.gov (United States)

    Billingsley, F. C.; Urena, J. L.

    1984-01-01

    The objective of the Global Resources Information System (GRIS) is to establish an effective and efficient information management system to meet the data access requirements of NASA and NASA-related scientists conducting large-scale, multi-disciplinary, multi-mission scientific investigations. Using standard interfaces and operating guidelines, diverse data systems can be integrated to provide the capabilities to access and process multiple geographically dispersed data sets and to develop the necessary procedures and algorithms to derive global resource information.

  11. [Disperse endocrine system and APUD concept].

    Science.gov (United States)

    Mil'to, I V; Sukhodolo, I V; Gereng, E A; Shamardina, L A

    2011-01-01

    This review describes the problems of disperse endocrine system and APUD-system morphology, summarizes some debatable issues of single endocrine cell biology. The data presented refer to the history of both systems discovery, morphological methods of their study, developmental sources, their structural organization and physiological roles of their cells. The significance of single endocrine cells in the regulation of the organism functions is discussed.

  12. A novel approach for simulating the optical misalignment caused by satellite platform vibration in the ground test of satellite optical communication systems.

    Science.gov (United States)

    Wang, Qiang; Tan, Liying; Ma, Jing; Yu, Siyuan; Jiang, Yijun

    2012-01-16

    Satellite platform vibration causes the misalignment between incident direction of the beacon and optical axis of the satellite optical communication system, which also leads to the instability of the laser link and reduces the precision of the system. So how to simulate the satellite platform vibration is a very important work in the ground test of satellite optical communication systems. In general, a vibration device is used for simulating the satellite platform vibration, but the simulation effect is not ideal because of the limited randomness. An approach is reasonable, which uses a natural random process for simulating the satellite platform vibration. In this paper, we discuss feasibility of the concept that the effect of angle of arrival fluctuation is taken as an effective simulation of satellite platform vibration in the ground test of the satellite optical communication system. Spectrum characteristic of satellite platform vibration is introduced, referring to the model used by the European Space Agency (ESA) in the SILEX program and that given by National Aeronautics and Space Development Agency (NASDA) of Japan. Spectrum characteristic of angle of arrival fluctuation is analyzed based on the measured data from an 11.16km bi-directional free space laser transmission experiment. Spectrum characteristic of these two effects is compared. The results show that spectra of these two effects have similar variation trend with the variation of frequency and feasibility of the concept is proved by the comparison results. At last the procedure of this method is proposed, which uses the power spectra of angle of arrival fluctuation to simulate that of the satellite platform vibration. The new approach is good for the ground test of satellite optical communication systems.

  13. Advanced propulsion system concept for hybrid vehicles

    Science.gov (United States)

    Bhate, S.; Chen, H.; Dochat, G.

    1980-01-01

    A series hybrid system, utilizing a free piston Stirling engine with a linear alternator, and a parallel hybrid system, incorporating a kinematic Stirling engine, are analyzed for various specified reference missions/vehicles ranging from a small two passenger commuter vehicle to a van. Parametric studies for each configuration, detail tradeoff studies to determine engine, battery and system definition, short term energy storage evaluation, and detail life cycle cost studies were performed. Results indicate that the selection of a parallel Stirling engine/electric, hybrid propulsion system can significantly reduce petroleum consumption by 70 percent over present conventional vehicles.

  14. Lipophilic super-absorbent swelling gels as cleaners for use on weapons systems and platforms

    Science.gov (United States)

    Increasingly stringent environmental regulations on volatile organic compounds (VOCs) and hazardous air pollutants (HAPs) demand the development of disruptive technologies for cleaning weapons systems and platforms. Currently employed techniques such as vapor degreasing, solvent, aqueous, or blast c...

  15. A Design of the Signal Processing Hardware Platform for Communication Systems

    Science.gov (United States)

    Lee, Byung Wook; Cho, Sung Ho

    In this letter, an efficient hardware platform for the digital signal processing for OFDM communication systems is presented. The hardware platform consists of a single FPGA having 900K gates, two DSPs with maximum 8,000 MIPS at 1GHz clock, 2-channel ADC and DAC supporting maximum 125MHz sampling rate, and flexible data bus architecture, so that a wide variety of baseband signal processing algorithms for practical OFDM communication systems may be implemented and tested. The IEEE 802.16d software modem is also presented in order to verify the effectiveness and usefulness of the designed platform.

  16. Using Movies to Teach Family Systems Concepts.

    Science.gov (United States)

    Hudock, Anthony M., Jr.; Warden, Sherry A. Gallagher

    2001-01-01

    This article reflects a review of research relevant to family systems training and the use of films in the teaching of family systems theory. Advantages and disadvantages of using movies in an introductory-level graduate family therapy course are discussed. An outline of family therapy training objectives, as well as examples of a movie-based…

  17. Project Design Concept for Monitoring and Control System

    Energy Technology Data Exchange (ETDEWEB)

    MCGREW, D.L.

    2000-10-02

    This Project Design Concept represents operational requirements established for use in design the tank farm Monitoring and Control System. These upgrades are included within the scope of Project W-314, Tank Farm Restoration and Safe Operations.

  18. A farm platform approach to optimizing temperate grazing-livestock systems: metrics for trade-off assessments and future innovations

    Science.gov (United States)

    Harris, Paul; Takahashi, Taro; Blackwell, Martin; Cardenas, Laura; Collins, Adrian; Dungait, Jennifer; Eisler, Mark; Hawkins, Jane; Misselbrook, Tom; Mcauliffe, Graham; Mcfadzean, Jamie; Murray, Phil; Orr, Robert; Jordana Rivero, M.; Wu, Lianhai; Lee, Michael

    2017-04-01

    Global agriculture is at a critical juncture when competing requirements for maximal production and minimal pollution have led to the concept of sustainable intensification. Livestock production, especially ruminant livestock is central to this debate. Ruminants make an important contribution to global food security by converting feed that is unsuitable for human consumption to high value protein, demand for which is currently increasing at an unprecedented rate. Sustainable intensification of ruminant livestock production may be applied to pastoral grazing, mixed-cropping, feedlot and housed production systems. All these systems have associated environmental risks such as water and air pollution, greenhouse gas emissions and soil degradation, as well as issues affecting production efficiency, product quality and consumer acceptability, such as reduced animal fertility, health and welfare, reflected in the development of agricultural sustainability policies. Further, in many societies livestock represent a resource far greater than just food, e.g. fibre, draught, fertiliser, fuel, bank and social. These challenges necessitate multidisciplinary solutions that can only be properly researched, implemented and tested in real-world production systems which are suited to their geographical and climatic production practice, e.g. temperate grassland. The North Wyke Farm Platform (http://www.rothamsted.ac.uk/farmplatform) was established during 2010 as a UK national capability for collaborative research, training and knowledge exchange in agro-environmental sciences. Its remit is to research agricultural productivity and ecosystem responses to different management practices for beef and sheep production in lowland temperate grasslands. Following construction, a typical beef and sheep system based on permanent pasture receiving chemical fertilisers on first grade pasture (>60% perennial ryegrass) was implemented across the 67.2 ha farm platform in order to obtain baseline

  19. THE CONCEPT OF UNINTERRUPTED POWER SUPPLY SYSTEMS

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2016-05-01

    Full Text Available We have revealed the main reasons for interruptions in power supply to consumers of electricity. To improve the reliability and the efficiency of power supply for responsible consumers, we have proposed to develop energy efficient combined energy-saving systems for uninterrupted power supply with use of renewable energy sources. The article lists major principles of the development of such systems; it shows the necessity of constructing a generalized schema that contains the possible types and the sources of electric power converters. It also reveals the modern requirements to systems of uninterrupted energy supply. To improve the operational and technical characteristics of the uninterruptible power supply, it has been proposed to use a new circuitry that includes a contactless power generators, the direct frequency converters used to stabilize the voltage and frequency of the current generators of wind turbines, static converters made with the use of single-phase transformers with rotating magnetic field, universal static converters that can operate in the regimes of known types of converters. The article presents features of the modular construction of systems of uninterrupted energy supply and optimization of their structural decisions on key performance criteria. It shows the algorithm of synthesis of structural designs of combined systems of uninterrupted power supply. An important step for further research with the aim of improving operational and technical characteristics of the combination of uninterrupted power supply systems is the mathematical modeling of physical processes in power circuits of the system in both normal and emergency modes of operation

  20. The design of the multifunctional training simulation system on the platform as the same as the weapon system

    Institute of Scientific and Technical Information of China (English)

    Lu,Bin; Zhou,XiaoDong

    2003-01-01

    This paper presents the way to design the multifunc-tional (fighting, testing, maintenance, query about malfunctionetc) training simulation system on the platform of hardware thatas same as the weapon system with C++ Builder language.

  1. THE BERKELEY DATA ANALYSIS SYSTEM (BDAS): AN OPEN SOURCE PLATFORM FOR BIG DATA ANALYTICS

    Science.gov (United States)

    2017-09-01

    THE BERKELEY DATA ANALYSIS SYSTEM (BDAS): AN OPEN SOURCE PLATFORM FOR BIG DATA ANALYTICS UNIVERSITY OF CALIFORNIA, BERKELEY...COMMAND NOTICE AND SIGNATURE PAGE Using Government drawings, specifications, or other data included in this document for any purpose other than...2017 4. TITLE AND SUBTITLE THE BERKELEY DATA ANALYSIS SYSTEM (BDAS): AN OPEN SOURCE PLATFORM FOR BIG DATA ANALYTICS 5a. CONTRACT NUMBER FA8750-12-2

  2. A CMake-Based Cross Platform Build System for Tcl/Tk

    Science.gov (United States)

    2011-11-01

    A CMake-Based Cross Platform Build System for Tcl / Tk by Clifford Yapp ARL-RP-347 November 2011 A reprint from...Proceedings of the 18th Annual Tcl / Tk Conference, Manassas, VA, 26 October 2011. Approved for public release...Proving Ground, MD 21005-5068 ARL-RP-347 November 2011 A CMake-Based Cross Platform Build System for Tcl / Tk Clifford Yapp Quantum

  3. System perspectives for mobile platform design in m-Health

    Science.gov (United States)

    Roveda, Janet M.; Fink, Wolfgang

    2016-05-01

    Advances in integrated circuit technologies have led to the integration of medical sensor front ends with data processing circuits, i.e., mobile platform design for wearable sensors. We discuss design methodologies for wearable sensor nodes and their applications in m-Health. From the user perspective, flexibility, comfort, appearance, fashion, ease-of-use, and visibility are key form factors. From the technology development point of view, high accuracy, low power consumption, and high signal to noise ratio are desirable features. From the embedded software design standpoint, real time data analysis algorithms, application and database interfaces are the critical components to create successful wearable sensor-based products.

  4. Modelling, analysis and optimisation of energy systems on offshore platforms

    OpenAIRE

    2014-01-01

    Produktionen af olie og gas på offshore platforme involverer processer såsom separation, behandling og kompression. Indvindingen udviser markante variationer fra år til år, hvilket resulterer i højere energiintensitet, lavere effektivitet og muligvis større energiforbrug. Formålet med dette projekt er at bidrage til en bedre forståelse af hvordan offshoreanlæg skal modelleres, analyseres og optimeres fra et energiperspektiv. Forskningsmæssige udfordringer knytter sig til (i) simulering og eva...

  5. Electrochemical sensing platform based on the highly ordered mesoporous carbon-fullerene system.

    Science.gov (United States)

    Zhou, Ming; Guo, Jidong; Guo, Li-ping; Bai, Jing

    2008-06-15

    In this paper, we report a novel all-carbon two-dimensionally ordered nanocomposite electrode system on the basis of the consideration of host-guest chemistry, which utilizes synergistic interactions between a nanostructured matrix of ordered mesoporous carbon (OMC) and an excellent electron acceptor of nanosized fullerene (C 60) to facilitate heterogeneous electron-transfer processes. The integration of OMC-C 60 by covalent interaction, especially its electrochemical applications for electrocatalysis, has not been explored thus far. Such integration may even appear to be counterintuitive because OMC and C 60 provide opposite electrochemical benefits in terms of facilitating heterogeneous electron-transfer processes. Nevertheless, the present work demonstrates the integration of OMC and C 60 can provide a remarkable synergistic augmentation of the current. To illuminate the concept, eight kinds of inorganic and organic electroactive compounds were employed to study the electrochemical response at an OMC-C 60 modified glassy carbon (OMC-C 60/GC) electrode for the first time, which shows more favorable electron-transfer kinetics than OMC/GC, carbon nanotube modified GC, C 60/GC, and GC electrodes. Such electrocatalytic behavior at OMC-C 60/GC electrode could be attributed to the unique physicochemical properties of OMC and C 60, especially the unusual host-guest synergy of OMC-C 60, which induced a substantial decrease in the overvoltage for NADH oxidation compared with GC electrode. The ability of OMC-C 60 to promote electron transfer not only suggests a new platform for the development of dehydrogenase-based bioelectrochemical devices but also indicates a potential of OMC-C 60 to be of a wide range of sensing applications because the electrocatalysis of different electroactive compounds at the OMC-C 60/GC electrode in this work should be a good model for constructing a novel and promising electrochemical sensing platform for further electrochemical detection of

  6. Photovoltaic village power systems: the minigrid concept

    Energy Technology Data Exchange (ETDEWEB)

    Conger, J.

    1980-01-01

    The photovoltaic power system of Schuchuli, a Papgo Indian village in Arizona, USA, is described and illustrated. 24 solar panels, each 1.22 x 2.44 m supply up to 3.5 kW at a supply voltage of 120 Vdc. Energy storage is provided by fifty-two 2380-Ah batteries connected in series. A load management system is utilized to disconnect, progressively, different loads as the battery capacity falls, and to reconnect the loads in the reverse sequence as the batteries become recharged. Such a system is considered eminently suitable for villages in the Third World. 5 references.

  7. The Development Of Windows Service Based Data Log System Using Light Dependent Resistor And Thingspeak IOT Cloud Platform

    Directory of Open Access Journals (Sweden)

    Tristan Jay P. Calaguas

    2015-08-01

    Full Text Available Microcontrollers are using in control and information processing it can be used in wide application such as agriculture health care commercial facilities robotics and education. These micro controllers are computers in chip that comprises of input and output ports central processing unit registers and main memory as well as communication interface such as Ethernet interface serial interface High Definition Multimedia Interface power source and many existing interface that can be found in this type of computer. In this study the researcher decided to conceptualize an innovative application of this type of computer where it has a potential to use as tracking system in specific individuals activities. Since some of office people are complaining in CCTV camera about their privacy this innovative concept of technology is in similar purpose but if we will compare the application concept in closed circuit camera the researcher decided to use visual graph instead video data that is in high exposure In the first phase the researcher made a concept on how the simple Light Dependent Resistor will apply in Schools Office Environment Application domain using microcontroller that was used as data log system and how this can be optimized without forcing the Dean or any designated person in office to operate it in hand due to their busy working hours. In the second phase the researcher develop the proposed data log system that are acquiring data through light luminance from fluorescent light of deans office and sending it in the IOT cloud platform. The researcher used fuzzy logic theory to model the operation of the proposed data log system. This study used experimental type of research when the prototype was developed during second phase the researcher simulated the operation. As the result the proposed data log system is sending data to Thingspeak IOT Cloud platform it displays the correct output which based from the rules and it is in column graph content

  8. CICERO: Control Information system Concepts based\

    CERN Multimedia

    2002-01-01

    RD38 : Modern High Energy Physics experiments and accelerators require sophisticated control systems to ensure their safe operation and to optimise their performance. Due to their complexity and to the large number of sensors needed for these purposes, they turn out to be difficult and costly to maintain with the present technology. The situation will seriously worsen with the LHC era. Various R\\&D departments of industrial companies are directly concerned with similar difficulties in power plants and complex automated systems. We propose to combine our efforts to study the various aspects of this problem. We intend to outline the main building blocks of generic control information system. As a result of this study we aim to provide technical solutions which could later be the major components of a basic turnkey system for medium to large scale HEP experiments and accelerators.

  9. Applied signal processing concepts, circuits, and systems

    CERN Document Server

    Hamdy, Nadder

    2008-01-01

    Introduction What are Signals? Signal parameters Why Signal processing? Analog vs. Digital Signal processing Practical Signal processing Systems Analog Signal Processing Amplitude Shaping Frequency Spectrum Shaping Phase Errors Correction Waveform Generation Analog Filter Design Describing Equations Design Procedures Filter Specifications Approximations to the Ideal Response Realization Practical RC-Filters Design Switched Capacitor Filter Realization Design examples Data Converters Introduction A typical DSP System Specifications of Data Converters Sampling Samp

  10. The German Saenger space transportation system concept

    Science.gov (United States)

    Koelle, D. E.; Kuczera, H.; Hoegenauer, E.

    The vehicle configuration, performance criteria, and technological problems of the Saenger space transportation system are reviewed. The vehicle consists of a two-stage system, including a hypersonic first stage employing turboramjet propulsion. The cruise speed is Mach 4.4, with the capability to accelerate to Mach 6.8 prior to separation of the upper stage. Two different upper stages are proposed to fulfull the different requirements of manned space flight and unmanned payload transportation.

  11. Information Management Platform for Data Analytics and Aggregation (IMPALA) System Design Document

    Science.gov (United States)

    Carnell, Andrew; Akinyelu, Akinyele

    2016-01-01

    The System Design document tracks the design activities that are performed to guide the integration, installation, verification, and acceptance testing of the IMPALA Platform. The inputs to the design document are derived from the activities recorded in Tasks 1 through 6 of the Statement of Work (SOW), with the proposed technical solution being the completion of Phase 1-A. With the documentation of the architecture of the IMPALA Platform and the installation steps taken, the SDD will be a living document, capturing the details about capability enhancements and system improvements to the IMPALA Platform to provide users in development of accurate and precise analytical models. The IMPALA Platform infrastructure team, data architecture team, system integration team, security management team, project manager, NASA data scientists and users are the intended audience of this document. The IMPALA Platform is an assembly of commercial-off-the-shelf (COTS) products installed on an Apache-Hadoop platform. User interface details for the COTS products will be sourced from the COTS tools vendor documentation. The SDD is a focused explanation of the inputs, design steps, and projected outcomes of every design activity for the IMPALA Platform through installation and validation.

  12. Ground Systems Integration Domain (GSID) Materials for Ground Platforms

    Science.gov (United States)

    2010-09-20

    18-24 months from Concept to Build • 12 month Tech Discovery phase • 12 months from Design to Build 40,000 - 60,000 lbs Medium Combat • S-MOD/MPC...durability to last until needed Synergetic effects of armor metallic (AL, STL, TI) laminated with ballistic liners ( Kevlar , E-glass, S-glass

  13. Developing a service platform definition to promote evidence-based planning and funding of the mental health service system

    National Research Council Canada - National Science Library

    Lee, Yong Yi; Meurk, Carla S; Harris, Meredith G; Diminic, Sandra; Scheurer, Roman W; Whiteford, Harvey A

    2014-01-01

    ... of services that are meaningful for policy makers. The 'service platform' is an emerging concept that could be used to this end, however no explicit definition currently exists in the literature...

  14. Conception of Electro-Stimulation System

    Directory of Open Access Journals (Sweden)

    Adil Salbi

    2014-10-01

    Full Text Available The aim of this work is to suggest a reliable solution of electro-stimulation making it possible to restore defective functions of the nervous systems among certain patients. This solution consists in creating a signal similar to that arriving of the central nervous system. Thus, work presented aims to design an electronic circuit of stimulation allowing the contraction of the muscle to restore its function by a biphasic train of electric impulse. This stimulator system is composed of a clock, an inverter and a logical sequencer which shifts the clock signal. The stage of power makes it possible to adapt the signals newcomers on a transformer booster coupled to a stage of order to regulate the amplitude of the impulse.

  15. The concept of self-organizing systems. Why bother?

    Science.gov (United States)

    Elverfeldt, Kirsten v.; Embleton-Hamann, Christine; Slaymaker, Olav

    2016-04-01

    Complexity theory and the concept of self-organizing systems provide a rather challenging conceptual framework for explaining earth systems change. Self-organization - understood as the aggregate processes internal to an environmental system that lead to a distinctive spatial or temporal organization - reduces the possibility of implicating a specific process as being causal, and it poses some restrictions on the idea that external drivers cause a system to change. The concept of self-organizing systems suggests that many phenomena result from an orchestration of different mechanisms, so that no causal role can be assigned to an individual factor or process. The idea that system change can be due to system-internal processes of self-organization thus proves a huge challenge to earth system research, especially in the context of global environmental change. In order to understand the concept's implications for the Earth Sciences, we need to know the characteristics of self-organizing systems and how to discern self-organizing systems. Within the talk, we aim firstly at characterizing self-organizing systems, and secondly at highlighting the advantages and difficulties of the concept within earth system sciences. The presentation concludes that: - The concept of self-organizing systems proves especially fruitful for small-scale earth surface systems. Beach cusps and patterned ground are only two of several other prime examples of self-organizing earth surface systems. They display characteristics of self-organization like (i) system-wide order from local interactions, (ii) symmetry breaking, (iii) distributed control, (iv) robustness and resilience, (v) nonlinearity and feedbacks, (vi) organizational closure, (vii) adaptation, and (viii) variation and selection. - It is comparatively easy to discern self-organization in small-scale systems, but to adapt the concept to larger scale systems relevant to global environmental change research is more difficult: Self

  16. Concept of an expert system for EQCreator

    Science.gov (United States)

    Schenk, Jiri; Telnarova, Zdenka; Habiballa, Hashim

    2016-06-01

    This article deals with the design of an ideal, and to some extent general, expert system for evaluation of randomly generated algebra with the help of EQCreator program, which is able to generate EQ of algebra. It was created for the purpose of future expansion of the program for the possibility of generating any algebra specified by the user.

  17. Sustainability of Agricultural Systems: Concept to Application

    Science.gov (United States)

    Agriculture not only feeds the planet, it also is the biggest overall factor affecting the environment. Thus, innovative sustainable farming systems that produce healthy food and protect the environment at the same time are very much needed. We, as agricultural engineers, need ...

  18. Advanced design concepts for open distributed systems

    NARCIS (Netherlands)

    Pires, L.F.; Ferreira Pires, Luis; van Sinderen, Marten J.; Vissers, C.A.

    1993-01-01

    Experience with the engineering of large scale open distributed systems has shown that their design should be specified at several well defined levels of abstractions, where each level aims at satisfying specific user, architectural and implementation purposes. Therefore designers should dispose of

  19. Nanoemulsion: A new concept of delivery system

    Directory of Open Access Journals (Sweden)

    Nitin Sharma

    2010-01-01

    Full Text Available Nanoemulsion has been identified as a promising delivery system for various drugs including biopharmaceuticals. Nanoemulsion is a heterogeneous system composed of one immiscible liquid dispersed as droplets within another liquid. The droplets size of nano emulsion is between 20 to 500 nm. Diameter and surface properties of droplets of nanoemulsion plays an important role in the biological behavior of the formulation. Small droplet sizes lead to transparent emulsions so that product appearance is not altered by the addition of an oil phase. In this paper various aspects of nanoemulsion have been discussed including advantages, disadvantages and methods of preparation. Furthermore new approaches of stability of formulation, effect of types and concentration of surfactant, process variables and method are also discussed to improve the stability of nanoemulsion formulation

  20. Concept Of The Legal System Analysis

    Directory of Open Access Journals (Sweden)

    Petr E. Zhigockiy

    2015-03-01

    Full Text Available In the present article an attempt to provide a theoretical analysis of the legal system, and to consider the law as one of the most complicated social phenomena was made. Author notes, that the contradictions prevailing in public practice are unpredictable. Doctrines of law are varied in their approaches, scores and results, but based on a common foundation: the law for people always acted as a certain order in a society, where the differences begin. Author draws attention to the fact, that the state and the law ensure the order in society by removing contradictions and achieving social compromises. The legal reality is divided into certain groups of legal systems, there is a classification. If we are relying on the identification of groups of the same order, there is the theoretical generality as the level of the theory of law on the legal systems basis. Analysis of the political and legal systems will draw attention to the democratic and totalitarian regimes. Totalitarian regimes are characterized by law as means of violence, the means of coercion and suppression. The majority of democratic regimes are characterized by the use of law as a means of social harmony and social compromise. In conclusion, author underlines, that the theory of law can be made not only at the level of each country. This level is a necessary basis for the theory, but not its completion. Based on the individual characteristics of each country's law, that is descended from the general and particular to an individual, the theory can and should continue to make the way back from the individual to the particular and the general.

  1. Advanced Operating Systems Concepts for BMD Applications.

    Science.gov (United States)

    1982-06-03

    Results The key results of this work are reported in detail in the attached theses of Branimir Gajic and Debra Lane. In particular, Gajic’s thesis...below: Theses "A Distributed Operating System for BMD Applications," Branimir Gajic, TR-CS-82-4. "A Communications Subsystem Based on a CSMA/CD...Cohen Graduate Assistant Uuaim-’.v :52 ) Debra Lane Graduate Assistant J ’st-i-t: Branimir Gajic Graduate Assistant -w4 Robert Souza Graduate

  2. The concept of “network” in the system of basic concepts of regional economic geography

    Directory of Open Access Journals (Sweden)

    Bolychev O.

    2014-12-01

    Full Text Available The concept of “network” is traditionally used in sociological and economic sciences and serves as an in important object of research on the organisational forms of different phenomena and processes. This article examines the use of the “network” concept in socioeconomic geography through identifying the place of this concept in the system of traditional concepts of this branch of geography: spatial system, territorial production complex, and cluster. The interaction between networks on a certain territory at a certain stage of its development comprises the framework of a region as a complex socioeconomic territorial system. The author examines economic networks as organic systems characterised by resistance to external effects and comprised of interconnected economic agents from one or several related industries. A concentration of strong connections within such network constitutes its core or a cluster. Based on a retrospective analysis of studies into the spatial organisation of economy, it is concluded that there is a need to examine network forms from the perspective of regional socioeconomic geography in the context of managerial decision-making. The regional economic geographical approach to studying network forms of spatial organisation makes it possible to take into account not only the organisational features of the network itself, but also their connections to the related contextual conditions. It is an integrated approach, thus, it makes it possible to forecast the development of a certain network form in case of a change in the conditions or factors affecting it.

  3. Oil and gas platforms with steam bottoming cycles: System integration and thermoenvironomic evaluation

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Tock, Laurence; Breuhaus, Peter

    2014-01-01

    The integration of steam bottoming cycles on oil and gas platforms is currently regarded as the most promising option for improving the performance of these energy-intensive systems. In this paper, a North Sea platform is taken as case study, and a systematic analysis of its energy requirements...... cooling utility, and (iv) the weight limitations on the platform are quantitatively assessed. The results illustrate the benefits of converting the gas turbine process into a combined cycle, since the fuel gas consumption and the total CO2-emissions can be reduced by more than 15 %. Using the cooling...

  4. A dynamic data source selection system for smartwatch platform.

    Science.gov (United States)

    Nemati, Ebrahim; Sideris, Konstantinos; Kalantarian, Haik; Sarrafzadeh, Majid

    2016-08-01

    A novel data source selection algorithm is proposed for ambulatory activity tracking of elderly people. The algorithm introduces the concept of dynamic switching between the data collection modules (a smartwatch and a smartphone) to improve accuracy and battery life using contextual information. We show that by making offloading decisions as a function of activity, the proposed algorithm improves power consumption and accuracy of the previous work by 7 hours and 5% respectively compared to the baseline.

  5. Water Recovery System Architecture and Operational Concepts to Accommodate Dormancy

    Science.gov (United States)

    Carter, Layne; Tabb, David; Anderson, Molly

    2017-01-01

    Future manned missions beyond low Earth orbit will include intermittent periods of extended dormancy. The mission requirement includes the capability for life support systems to support crew activity, followed by a dormant period of up to one year, and subsequently for the life support systems to come back online for additional crewed missions. NASA personnel are evaluating the architecture and operational concepts that will allow the Water Recovery System (WRS) to support such a mission. Dormancy could be a critical issue due to concerns with microbial growth or chemical degradation that might prevent water systems from operating properly when the crewed mission began. As such, it is critical that the water systems be designed to accommodate this dormant period. This paper identifies dormancy issues, concepts for updating the WRS architecture and operational concepts that will enable the WRS to support the dormancy requirement.

  6. An Autonomous Distributed Control System for Naval Platforms

    NARCIS (Netherlands)

    Janssen, J.A.A.J.; Logtmeijer, R.A.; Bodegraven, K.S. van

    2009-01-01

    The success of the missions of naval ships depends highly on the availability of sensor, weapon, and command systems. These systems depend on support systems such as chilled water systems and electrical power systems. Disturbances caused by technical problems or battle damage may result in

  7. An Autonomous Distributed Control System for Naval Platforms

    NARCIS (Netherlands)

    Janssen, J.A.A.J.; Logtmeijer, R.A.; Bodegraven, K.S. van

    2009-01-01

    The success of the missions of naval ships depends highly on the availability of sensor, weapon, and command systems. These systems depend on support systems such as chilled water systems and electrical power systems. Disturbances caused by technical problems or battle damage may result in deteriora

  8. Orbital express capture system: concept to reality

    Science.gov (United States)

    Stamm, Shane; Motaghedi, Pejmun

    2004-08-01

    The development of autonomous servicing of on-orbit spacecraft has been a sought after objective for many years. A critical component of on-orbit servicing involves the ability to successfully capture, institute mate, and perform electrical and fluid transfers autonomously. As part of a Small Business Innovation Research (SBIR) grant, Starsys Research Corporation (SRC) began developing such a system. Phase I of the grant started in 1999, with initial work focusing on simultaneously defining the parameters associated with successful docking while designing to those parameters. Despite the challenge of working without specific requirements, SRC completed development of a prototype design in 2000. Throughout the following year, testing was conducted on the prototype to characterize its performance. Having successfully completed work on the prototype, SRC began a Phase II SBIR effort in mid-2001. The focus of the second phase was a commercialization effort designed to augment the prototype model into a more flight-like design. The technical requirements, however, still needed clear definition for the design to progress. The advent of the Orbital Express (OE) program provided much of that definition. While still in the proposal stages of the OE program, SRC began tailoring prototype redesign efforts to the OE program requirements. A primary challenge involved striking a balance between addressing the technical requirements of OE while designing within the scope of the SBIR. Upon award of the OE contract, the Phase II SBIR design has been fully developed. This new design, designated the Mechanical Docking System (MDS), successfully incorporated many of the requirements of the OE program. SRC is now completing dynamic testing on the MDS hardware, with a parallel effort of developing a flight design for OE. As testing on the MDS progresses, the design path that was once common to both SBIR effort and the OE program begins to diverge. The MDS will complete the scope of the

  9. Gravity field error analysis - Applications of Global Positioning System receivers and gradiometers on low orbiting platforms

    Science.gov (United States)

    Schrama, Ernst J. O.

    1991-11-01

    The concept of a Global Positioning System (GPS) receiver as a tracking facility and a gradiometer as a separate instrument on a low-orbiting platform offers a unique tool to map the earth's gravitational field with unprecedented accuracies. The former technique allows determination of the spacecraft's ephemeris at any epoch to within 3-10 cm, the latter permits the measurement of the tensor of second order derivatives of the gravity field to within 0.01 to 0.0001 Eotvos units depending on the type of gradiometer. First, a variety of error sources in gradiometry where emphasis is placed on the rotational problem pursuing as well a static as a dynamic approach is described. Next, an analytical technique is described and applied for an error analysis of gravity field parameters from gradiometer and GPS observation types. Results are discussed for various configurations proposed on Topex/Poseidon, Gravity Probe-B, and Aristoteles, indicating that GPS only solutions may be computed up to degree and order 35, 55, and 85, respectively, whereas a combined GPS/gradiometer experiment on Aristoteles may result in an acceptable solution up to degree and order 240.

  10. VirtualPlant: A Software Platform to Support Systems Biology Research1[W][OA

    Science.gov (United States)

    Katari, Manpreet S.; Nowicki, Steve D.; Aceituno, Felipe F.; Nero, Damion; Kelfer, Jonathan; Thompson, Lee Parnell; Cabello, Juan M.; Davidson, Rebecca S.; Goldberg, Arthur P.; Shasha, Dennis E.; Coruzzi, Gloria M.; Gutiérrez, Rodrigo A.

    2010-01-01

    Data generation is no longer the limiting factor in advancing biological research. In addition, data integration, analysis, and interpretation have become key bottlenecks and challenges that biologists conducting genomic research face daily. To enable biologists to derive testable hypotheses from the increasing amount of genomic data, we have developed the VirtualPlant software platform. VirtualPlant enables scientists to visualize, integrate, and analyze genomic data from a systems biology perspective. VirtualPlant integrates genome-wide data concerning the known and predicted relationships among genes, proteins, and molecules, as well as genome-scale experimental measurements. VirtualPlant also provides visualization techniques that render multivariate information in visual formats that facilitate the extraction of biological concepts. Importantly, VirtualPlant helps biologists who are not trained in computer science to mine lists of genes, microarray experiments, and gene networks to address questions in plant biology, such as: What are the molecular mechanisms by which internal or external perturbations affect processes controlling growth and development? We illustrate the use of VirtualPlant with three case studies, ranging from querying a gene of interest to the identification of gene networks and regulatory hubs that control seed development. Whereas the VirtualPlant software was developed to mine Arabidopsis (Arabidopsis thaliana) genomic data, its data structures, algorithms, and visualization tools are designed in a species-independent way. VirtualPlant is freely available at www.virtualplant.org. PMID:20007449

  11. Development of a Biosensor Nanofluidic Platform for Integration with Terahertz Spectroscopic System

    Science.gov (United States)

    2014-06-27

    Public Release; Distribution Unlimited Development of a Biosensor Nanofluidic Platform for Integration With Terahertz Spectroscopic System The views...VA 22902 -8734 ABSTRACT Number of Papers published in peer-reviewed journals: Development of a Biosensor Nanofluidic Platform for Integration With...in sub-THz range required less than 0.01 ng of dry material. The developed highly sensitive biosensors operating at room temperature with

  12. Decentralized Enterprise Systems: A Multi-platform Wireless Sensor Networks Approach

    OpenAIRE

    Marin-Perianu, M.; Meratnia, N.; Havinga, P. J. M.; Moreira Sá de Souza, L.; Müller, J.; Spiess, P.; Haller, S.; T. Riedel; C. Decker; Stromberg, G.

    2007-01-01

    Massively deployed wireless sensor and actuator networks, co-existing with RFID technology, can bring clear benefits to large-scale enterprise systems, by delegating parts of the business functionality closer to the point of action. However, a major impediment in the integration process is represented by the variety of customized platforms and proprietary technologies. In this paper, we present a three-layer service-oriented architecture that accommodates different sensor platforms and expose...

  13. Key Technologies for Decentralized Control Platform with Dynamic Evolution for Railway Transportation System

    Institute of Scientific and Technical Information of China (English)

    Tan Yongdong; GuiXun; Qian Qingquan

    2006-01-01

    Key technologies as well as their principles were discussed for a decentralized control platform capable of dynamic evolution.The primary content includes the automatic decision-making mechanism and the algorithm of the control center migration, the principle and technology of system self-monitoring, the principle and technology of the switch-mode of remote control station, the information transmission technology, and the data consistency technology. These key technologies have shown a series of advanced characteristics for decentralized control platform.

  14. Car-Finding System With Couchdb-Based Sensor Management Platform

    Directory of Open Access Journals (Sweden)

    Łukasz Nocuń

    2013-01-01

    Full Text Available Growing performance of low-cost mobile devices makes it possible to perform advancedprocessing on mobile sensors. This creates a need of building management system for groupsof sensors actively analyzing signals from hardware devices. In this paper an architectureof a CouchDB-Based Sensor Management Platform is presented and its application for theproblem of finding stolen cars is shown. Detailed performance tests of the platform and itsapplication are provided.

  15. Reflection on Foreign Languages Network Teaching Platform

    Institute of Scientific and Technical Information of China (English)

    LIANG Yuan

    2014-01-01

    This paper aims to build awareness in applying foreign languages network teaching platform to higher education. Teachers rationally use foreign languages network teaching platform to hold an initiative concept, establish a cooperative and in-teractive learning atmosphere, and a prompt and dynamic assessment system.

  16. Concept of an Effective Sentinel-1 Satellite SAR Interferometry System

    OpenAIRE

    2016-01-01

    This brief study introduces a partially working concept being developed at IT4Innovations supercomputer (HPC) facility. This concept consists of several modules that form a whole body of an efficient system for observation of terrain or objects displacements using satellite SAR interferometry (InSAR). A metadata database helps to locate data stored in various storages and to perform basic analyzes. A special database has been designed to describe Sentinel-1 data, on its burst level. Custom Se...

  17. Organizational Systems Theory and Command and Control Concepts

    Science.gov (United States)

    2013-03-01

    World War the German Army, in an attempt to break the stalemate of the trenches, tactically implemented the concept from von Moltke of allowing...subordinates to use personal initiative. The Germans of the First World War took this concept even further, by pushing authority to the squads and platoons...Uncertain, Complex and Ambiguous ( VUCA ) environment. 29 9 Charles B. Perrow is not, by any means, the only complex systems theorist. However, he

  18. A multi-chip data acquisition system based on a heterogeneous system-on-chip platform

    CERN Document Server

    Fiergolski, Adrian

    2017-01-01

    The Control and Readout Inner tracking BOard (CaRIBOu) is a versatile readout system targeting a multitude of detector prototypes. It profits from the heterogeneous platform of the Zynq System-on-Chip (SoC) and integrates in a monolithic device front-end FPGA resources with a back-end software running on a hard-core ARM-based processor. The user-friendly Linux terminal with the pre-installed DAQ software is combined with the efficiency and throughput of a system fully implemented in the FPGA fabric. The paper presents the design of the SoC-based DAQ system and its building blocks. It also shows examples of the achieved functionality for the CLICpix2 readout ASIC.

  19. Concepts and models of coupled systems

    Science.gov (United States)

    Ertsen, Maurits

    2017-04-01

    In this paper, I will especially focus on the question of the position of human agency, social networks and complex co-evolutionary interactions in socio-hydrological models. The long term perspective of complex systems' modeling typically focuses on regional or global spatial scales and century/millennium time scales. It is still a challenge to relate correlations in outcomes defined at those longer and larger scales to the causalities at the shorter and smaller scales. How do we move today to the next 1000 years in the same way that our ancestors did move from their today to our present, in the small steps that produce reality? Please note, I am not arguing long term work is not interesting or the like. I just pose the question how to deal with the problem that we employ relations with hindsight that matter to us, but not necessarily to the agents that produced the relations we think we have observed. I would like to push the socio-hydrological community a little into rethinking how to deal with complexity, with the aim to bring together the timescales of humans and complexity. I will provide one or two examples of how larger-scale and longer-term observations on water flows and environmental loads can be broken down into smaller-scale and shorter-term production processes of these same loads.

  20. Establishment of Standards System of Geospatial Data Exchange and Sharing Platform in Zhejiang

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The paper analysed the motivation of establishment of the standard system, and the purpose and significance to establish the standards system of platform for Zhejiang Geospatial Data Exchange and Sharing. On this basis, built the principles of establishing standards system, and introduced the details of its contents.

  1. Advances in integrated and sustainable supply chain planning concepts, methods, tools and solution approaches toward a platform for industrial practice

    CERN Document Server

    Laínez-Aguirre, José Miguel

    2015-01-01

    Decision making at the enterprise level often encompass not only production operations and  product R&D, but other strategic functions such as financial planning and marketing. With the aim of maximizing growth and a firm’s value, companies often focus on co-ordinating these functional components as well as traditional hierarchical decision levels. Understanding this interplay can enhance enterprise capabilities of adaptation and response to uncertainties arising from internal processes as well as the external environment. This book presents concepts, methods, tools and solutions based on mathematical programming, which provides the quantitative support needed for integrated decision-making and ultimately for improving the allocation of overall corporate resources (e.g., materials, cash and personnel). Through a systems perspective, the integrated planning of the supply chain also promotes activities of reuse, reduction and recycling for achieving more sustainable environmental impacts of production/di...

  2. Concept of Indoor 3D-Route UAV Scheduling System

    DEFF Research Database (Denmark)

    Khosiawan, Yohanes; Nielsen, Izabela Ewa; Do, Ngoc Ang Dung;

    2016-01-01

    environment. On top of that, the multi-source productive best-first-search concept also supports efficient real-time scheduling in response to uncertain events. Without human intervention, the proposed work provides an automatic scheduling system for UAV routing problem in 3D indoor environment.......The objective of the proposed concept is to develop a methodology to support Unmanned Aerial Vehicles (UAVs) operation with a path planning and scheduling system in 3D environments. The proposed 3D path-planning and scheduling allows the system to schedule UAVs routing to perform tasks in 3D indoor...

  3. Atmospheric fluidized bed combustion advanced concept system

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    DONLEE Technologies Inc. is developing with support of the US Department of Energy an advanced circulating fluidized bed technology known as the Vortex{trademark} Fluidized Bed Combustor (VFBC). The unique feature of the VFBC is the injection of a significant portion of the combustion air into the cyclone. Since as much as one-half of the total combustion air is injected into the cyclone, the cross-sectional area of the circulating fluidized bed is considerably smaller than typical circulating fluidized beds. The technology is being developed for two applications: Industrial-scale boilers ranging from 20,000 to 100,000 pounds per hour steam generating capacity; and two-stage combustion in which a substoichiometric Vortex Fluidized Bed Combustor (2VFBC) or precombustor is used to generate a combustible gas for use primarily in boiler retrofit applications. This Level II analysis of these two applications indicates that both have merit. An industrial-scale VFBC boiler (60,000 lb/hr of steam) is projected to be economically attractive with coal prices as high as $40 per ton and gas prices between $4 and $5 per thousand cubic feet. The payback time is between 3 and 4 years. The 2VFBC system was evaluated at three capacities of application: 20,000; 60,000 and 100,000 lb/hr of steam. The payback times for these three capacities are 4.5, 2.1 and 1.55 years, respectively. The 2VFBC has potential applications for retrofit of existing pulverized coal-fired boilers or as a new large (utility) boiler. Pressurized operation of the 2VFBC has considerable potential for combined cycle power generation applications. Experimental development of both applications is presented here to demonstrate the potential of these two technologies.

  4. Design and development of a device management platform for EAST cryogenic system

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhiwei, E-mail: zzw@ipp.ac.cn; Lu, Xiaofei, E-mail: xiaofeilu@ipp.ac.cn; Zhuang, Ming, E-mail: zhm@ipp.ac.cn; Hu, Liangbing, E-mail: huliangbing@ipp.ac.cn; Xia, Genhai, E-mail: xgh@ipp.ac.cn

    2014-05-15

    Highlights: • A device management platform for EAST cryogenic system based on DCS is designed. • This platform enhances the integrity and continuity of system device information. • It can help predictive maintenance and device management decision. - Abstract: EAST cryogenic system is one of the critical sub-systems of the EAST tokamak device. It is a large scale helium cryoplant, which adopts distributed control system to realize monitoring and control of the cryogenic process and devices. However, the maintenance and management of most field devices are still in the corrective maintenance or traditional preventive maintenance stage. Under maintained or over maintained problems widely exist, which could cause devices fault and increase operation costs. Therefore, a device management platform is proposed for a safe and steady operation as well as fault diagnosis and predictive maintenance of EAST cryogenic system. This paper presents the function design and architecture design of the cryogenic device management platform. This platform is developed based on DeltaV DCS and acquires monitoring data through OPC protocol. It consists of three pillars, namely device information management, device condition management, and device performance monitoring. The development and implementation of every pillar are illustrated in detail in this paper. Test results and discussions are presented in the end.

  5. A development environment for operational concepts and systems engineering analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Raybourn, Elaine Marie; Senglaub, Michael E.

    2004-03-01

    The work reported in this document involves a development effort to provide combat commanders and systems engineers with a capability to explore and optimize system concepts that include operational concepts as part of the design effort. An infrastructure and analytic framework has been designed and partially developed that meets a gap in systems engineering design for combat related complex systems. The system consists of three major components: The first component consists of a design environment that permits the combat commander to perform 'what-if' types of analyses in which parts of a course of action (COA) can be automated by generic system constructs. The second component consists of suites of optimization tools designed to integrate into the analytical architecture to explore the massive design space of an integrated design and operational space. These optimization tools have been selected for their utility in requirements development and operational concept development. The third component involves the design of a modeling paradigm for the complex system that takes advantage of functional definitions and the coupled state space representations, generic measures of effectiveness and performance, and a number of modeling constructs to maximize the efficiency of computer simulations. The system architecture has been developed to allow for a future extension in which the operational concept development aspects can be performed in a co-evolutionary process to ensure the most robust designs may be gleaned from the design space(s).

  6. A Control Systems Concept Inventory Test Design and Assessment

    Science.gov (United States)

    Bristow, M.; Erkorkmaz, K.; Huissoon, J. P.; Jeon, Soo; Owen, W. S.; Waslander, S. L.; Stubley, G. D.

    2012-01-01

    Any meaningful initiative to improve the teaching and learning in introductory control systems courses needs a clear test of student conceptual understanding to determine the effectiveness of proposed methods and activities. The authors propose a control systems concept inventory. Development of the inventory was collaborative and iterative. The…

  7. A Control Systems Concept Inventory Test Design and Assessment

    Science.gov (United States)

    Bristow, M.; Erkorkmaz, K.; Huissoon, J. P.; Jeon, Soo; Owen, W. S.; Waslander, S. L.; Stubley, G. D.

    2012-01-01

    Any meaningful initiative to improve the teaching and learning in introductory control systems courses needs a clear test of student conceptual understanding to determine the effectiveness of proposed methods and activities. The authors propose a control systems concept inventory. Development of the inventory was collaborative and iterative. The…

  8. Concept of Indoor 3D-Route UAV Scheduling System

    DEFF Research Database (Denmark)

    Khosiawan, Yohanes; Nielsen, Izabela Ewa; Do, Ngoc Ang Dung

    2016-01-01

    The objective of the proposed concept is to develop a methodology to support Unmanned Aerial Vehicles (UAVs) operation with a path planning and scheduling system in 3D environments. The proposed 3D path-planning and scheduling allows the system to schedule UAVs routing to perform tasks in 3D indoor...

  9. Architectural design - Conception and specification of interactive systems

    NARCIS (Netherlands)

    Vissers, C.A.; Ferreira Pires, Luis; Quartel, Dick; van Sinderen, Marten J.

    2016-01-01

    This book presents a design methodology that is practically applicable to the architectural design of a broad range of systems. It is based on fundamental design concepts to conceive and specify the required functional properties of a system, while abstracting from the specific implementation

  10. Combining UML2 Application and SystemC Platform Modelling for Performance Evaluation of Real-Time Embedded Systems

    Directory of Open Access Journals (Sweden)

    Kari Tiensyrjä

    2008-08-01

    Full Text Available Future mobile devices will be based on heterogeneous multiprocessing platforms accommodating several stand-alone applications. The network-on-chip communication and device networking combine the design challenges of conventional distributed systems and resource constrained real-time embedded systems. Interoperable design space exploration for both the application and platform development is required. Application designer needs abstract platform models to rapidly check the feasibility of a new feature or application. Platform designer needs abstract application models for defining platform computation and communication capacities. We propose a layered UML application/workload and SystemC platform modelling approach that allow application and platform to be modelled at several levels of abstraction, which enables early performance evaluation of the resulting system. The overall approach has been experimented with a mobile video player case study, while different load extraction methods have been validated by applying them to MPEG-4 encoder, Quake2 3D game, and MP3 decoder case studies previously.

  11. Combining UML2 Application and SystemC Platform Modelling for Performance Evaluation of Real-Time Embedded Systems

    Directory of Open Access Journals (Sweden)

    Qu Yang

    2008-01-01

    Full Text Available Abstract Future mobile devices will be based on heterogeneous multiprocessing platforms accommodating several stand-alone applications. The network-on-chip communication and device networking combine the design challenges of conventional distributed systems and resource constrained real-time embedded systems. Interoperable design space exploration for both the application and platform development is required. Application designer needs abstract platform models to rapidly check the feasibility of a new feature or application. Platform designer needs abstract application models for defining platform computation and communication capacities. We propose a layered UML application/workload and SystemC platform modelling approach that allow application and platform to be modelled at several levels of abstraction, which enables early performance evaluation of the resulting system. The overall approach has been experimented with a mobile video player case study, while different load extraction methods have been validated by applying them to MPEG-4 encoder, Quake2 3D game, and MP3 decoder case studies previously.

  12. Study on Data Platform Standards System%数据平台标准体系研究

    Institute of Scientific and Technical Information of China (English)

    张正敏; 朱婕

    2016-01-01

    In recent years, the role of data has reached an unprecedented height for the government and enterprises, so the investment of data platform construction is also growing. In order to promote the standardization level of relevant data platform of government and public institutions and promote the role of public information in the construction of social credit system, this paper takes reference of the OPC series standard design concept, puts forward a data platform standards system according to the relevant national policies and regulations, analyzes the related technical requirements of data exchange and security, which makes a useful exploration for enhancing the standardization level of China's data platform construction and application.%近年来,政府和企业对于数据作用的认识达到了前所未有的高度,数据平台建设的投入也越来越大。为提升政府、事业单位相关部门数据平台的标准化水平,促进公共信息在社会诚信体系建设中的作用,本文在借鉴OPC系列标准设计理念的基础上,按照国家相关政策法规的要求,提出了数据平台标准体系,重点分析了数据在交换和安全方面的技术要求,为我国数据平台的建设和应用标准化水平提升做出了有益的探索。

  13. Development of Testing Platform for Digital I and C System in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, G. Y.; Kim, Y. M.; Jeong, C. H. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    According to digitalization of the NPP (Nuclear Power Plant) I and C (Instrumentation and Control) system, cyber threats against I and C system are increased. Moreover, the complexity of I and C system are increased due to adopt the up-to-date technologies (i. e., smart sensor, wireless network, and Field Programmable Gate Array / Complex Programmable Logic Device) into NPP's I and C system. For example, new issues such as cyber threat are introduced from digitalized I and C systems and components to replace obsolete analog equipment in existing NPPs. Furthermore, use of wireless communication, FPGA/CPLD, and smart sensor could introduce new considerations such as Defense-in-Depth and Diversity. Therefore, the proof testing for digital I and C system is required to verify the adverse effect from use of up-to-date digital technologies and identify the criteria to resolve and mitigate (or prevent) the (possibility of) effects. The objective of this study is developing the Testing Platform for the proof testing. The digital I and C System Test Platform is implemented using test platform hardware, component software, and architectural design. The digital I and C testing platform includes the safety-related PLC and relevant ladder logics, Windows-based C++ codes for host PC. For software, there are seven spike models to confirm the each module's functionality and generate/monitor the signals to/from PLCs. For future work, digital I and C System Test Platform architecture will be implemented using spike models. And a set of acceptance test against cyber security, smart sensor, wireless network, and FPGA/CPLD will be conducted using digital I and C System Test Platform.

  14. Constructing the Financial Analysis Platform Based on the Concepts of Big Dada%基于大数据理念构建金融分析平台

    Institute of Scientific and Technical Information of China (English)

    张朝阳; 藏才让; 王晓妍

    2015-01-01

    随着基于数据的价值发现过程时代的到来,针对成几何倍增长的海量数据,传统分析手段已难以适应新形势的需求,而经过互联网、云计算等基于大数据理念的信息化处理方式,在挖掘信息价值、创新金融服务、开拓市场需求等方面体现了很强的竞争力,创造着重要的业务价值。在这样的时代背景下,建立金融大数据分析平台不仅将为央行健全完善决策管理体系提供参谋支撑,更能在今后结合传统金融重构金融体系中发挥巨大价值。%Along with the arrival of the era of the value discovery process based on the data, aiming at the huge amounts of data which geometrically multiple, the traditional analysis means have been difficult to meet the requirement of the new situation. The information processing methods based on the concept of big data such as through the Internet, cloud computing etc. reflect the strong competitiveness in such aspects as discovering the information value, innovating in the financial services and expanding the market demand and so on, which creates an important business value. Under such background, the establishment of financial big data analysis platform will not only provide the support for the central bank to improve decision-making management system but also play a great value in combining with the traditional finance and restructuring the financial system.

  15. Systems engineering analysis of kinetic energy weapon concepts

    Energy Technology Data Exchange (ETDEWEB)

    Senglaub, M.

    1996-06-01

    This study examines, from a systems engineering design perspective, the potential of kinetic energy weapons being used in the role of a conventional strategic weapon. Within the Department of Energy (DOE) complex, strategic weapon experience falls predominantly in the nuclear weapons arena. The techniques developed over the years may not be the most suitable methodologies for use in a new design/development arena. For this reason a more fundamental approach was pursued with the objective of developing an information base from which design decisions might be made concerning the conventional strategic weapon system concepts. The study examined (1) a number of generic missions, (2) the effects of a number of damage mechanisms from a physics perspective, (3) measures of effectiveness (MOE`s), and (4) a design envelope for kinetic energy weapon concepts. With the base of information a cut at developing a set of high-level system requirements was made, and a number of concepts were assessed against these requirements.

  16. Systems engineering analysis of kinetic energy weapon concepts

    Energy Technology Data Exchange (ETDEWEB)

    Senglaub, M.

    1996-06-01

    This study examines, from a systems engineering design perspective, the potential of kinetic energy weapons being used in the role of a conventional strategic weapon. Within the Department of Energy (DOE) complex, strategic weapon experience falls predominantly in the nuclear weapons arena. The techniques developed over the years may not be the most suitable methodologies for use in a new design/development arena. For this reason a more fundamental approach was pursued with the objective of developing an information base from which design decisions might be made concerning the conventional strategic weapon system concepts. The study examined (1) a number of generic missions, (2) the effects of a number of damage mechanisms from a physics perspective, (3) measures of effectiveness (MOE`s), and (4) a design envelope for kinetic energy weapon concepts. With the base of information a cut at developing a set of high-level system requirements was made, and a number of concepts were assessed against these requirements.

  17. Systems analysis and futuristic designs of advanced biofuel factory concepts.

    Energy Technology Data Exchange (ETDEWEB)

    Chianelli, Russ; Leathers, James; Thoma, Steven George; Celina, Mathias C.; Gupta, Vipin P.

    2007-10-01

    The U.S. is addicted to petroleum--a dependency that periodically shocks the economy, compromises national security, and adversely affects the environment. If liquid fuels remain the main energy source for U.S. transportation for the foreseeable future, the system solution is the production of new liquid fuels that can directly displace diesel and gasoline. This study focuses on advanced concepts for biofuel factory production, describing three design concepts: biopetroleum, biodiesel, and higher alcohols. A general schematic is illustrated for each concept with technical description and analysis for each factory design. Looking beyond current biofuel pursuits by industry, this study explores unconventional feedstocks (e.g., extremophiles), out-of-favor reaction processes (e.g., radiation-induced catalytic cracking), and production of new fuel sources traditionally deemed undesirable (e.g., fusel oils). These concepts lay the foundation and path for future basic science and applied engineering to displace petroleum as a transportation energy source for good.

  18. Designing a Multi Agent System Architecture for IT Governance Platform

    Directory of Open Access Journals (Sweden)

    S. ELHASNAOUI

    2014-06-01

    Full Text Available This paper presents a multi-agents architecture which facilitates the integration of three major IT governance frameworks: COBIT5, ITIL V3 and ISO/IEC27002, to optimize the construction of a distributed system. This architecture proposes a new and easier method to develop a distributed multi agents system, where agents involved in this system can communicate in a distributed way thanks to functionalities offered by the system. It gives finally an overview of implementation of a prototype of the proposed solution limited for the moment to integration of processes most used in the majority of information systems.

  19. Using Rule Base System in Mobile Platform to Build Alert System for Evacuation and Guidance

    Directory of Open Access Journals (Sweden)

    Maysoon Fouad Abulkhair

    2016-04-01

    Full Text Available The last few years have witnessed the widespread use of mobile technology. Billions of citizens around the world own smartphones, which they use for both personal and business applications. Thus, technologies will minimize the risk of losing people's lives. Mobile platform is one of the most popular plat-form technologies utilized on a wide scale and accessible to a high number of people. There has been a huge increase in natural and manmade disasters in the last few years. Such disasters can hap-pen anytime and anywhere causing major damage to people and property. The environment affluence and the failure of people to go to other safe places are the results of catastrophic events re-cently in Jeddah city. Flood causes the sinking and destruction of homes and private properties. Thus, this paper describes a sys-tem that can help in determining the affected properties, evacuat-ing them, and providing a proper guidance to the registered users in the system. This system notifies mobile phone users by sending guidance messages and sound alerts, in a real-time when disasters (fires, floods hit. Warnings and tips are received on the mobile user to teach him/her how to react before, during, and after the disaster. Provide a mobile application using GPS to determine the user location and guide the user for the best way with the aid of rule-based system that built through the interview with the Experts domains. Moreover, the user will re-ceive Google map updates for any added information. This sys-tem consists of two subsystems: the first helps students in our university to evacuate during a catastrophe and the second aids all people in the city. Due to all these features, the system can access the required information at the needed time.

  20. Telescope Array Control System Based on Wireless Touch Screen Platform

    Science.gov (United States)

    Fu, X. N.; Huang, L.; Wei, J. Y.

    2016-07-01

    GWAC (Ground-based Wide Angle Cameras) are the ground-based observational instruments of the Sino-French cooperation SVOM (Space Variable Objects Monitor) astronomical satellite, and Mini-GWAC is a pathfinder and supplement of GWAC. In the context of the Mini-GWAC telescope array, this paper introduces the design and implementation of a kind of telescope array control system, which is based on wireless serial interface module to communicate. We describe the development and implementation of the system in detail in terms of control system principle, system hardware structure, software design, experiment, and test. The system uses the touch-control PC which is based on the Windows CE system as the upper-computer, the wireless transceiver module and PLC (Programmable Logic Controller) as the core. It has the advantages of low cost, reliable data transmission, and simple operation. So far, the control system has been applied to Mini-GWAC successfully.

  1. Model Predictive Controller Design for the Dynamic Positioning System of a Semi-submersible Platform

    Institute of Scientific and Technical Information of China (English)

    Hongli Chen; Lei Wan; Fang Wang; Guocheng Zhang

    2012-01-01

    This paper researches how to apply the advanced control technology of model predictive control (MPC) to the design of the dynamic positioning system (DPS) of a semi-submersible platform.First,a linear low-frequency motion model with three degrees of freedom was established in the context of a semi-submersible platform.Second,a model predictive controller was designed based on a model which took the constraints of the system into account.Third,simulation was carried out to demonstrate the feasibility of the controller.The results show that the model predictive controller has good performance and good at dealing with the constraints of the system.

  2. Hardware in the loop simulation test platform of fuel cell backup system

    Directory of Open Access Journals (Sweden)

    Ma Tiancai

    2015-01-01

    Full Text Available Based on an analysis of voltage mechanistic model, a real-time simulation model of the proton exchange membrane (PEM fuel cell backup system is developed, and verified by the measurable experiment data. The method of online parameters identification for the model is also improved. Based on the software LabVIEW/VeriStand real-time environment and the PXI Express hardware system, the PEM fuel cell system controller hardware in the loop (HIL simulation plat-form is established. Controller simulation test results showed the accuracy of HIL simulation platform.

  3. Satellite systems for personal applications concepts and technology

    CERN Document Server

    Richharia, Madhavendra

    2010-01-01

    Presents the concepts, technology, and role of satellite systems in support of personal applications, such as mobile and broadband communications, navigation, television, radio and multimedia broadcasting, safety of life services, etc. This book presents a novel perspective on satellite systems, reflecting the modern personal technology context, and hence a focus on the individual as end-user. The book begins by outlining key generic concepts before discussing techniques adopted in particular application areas; next, it exemplifies these techniques through discussion of state-of-art c

  4. Mars power system concept definition study. Volume 1: Study results

    Science.gov (United States)

    Littman, Franklin D.

    1994-12-01

    A preliminary top level study was completed to define power system concepts applicable to Mars surface applications. This effort included definition of power system requirements and selection of power systems with the potential for high commonality. These power systems included dynamic isotope, Proton Exchange Membrane (PEM) regenerative fuel cell, sodium sulfur battery, photovoltaic, and reactor concepts. Design influencing factors were identified. Characterization studies were then done for each concept to determine system performance, size/volume, and mass. Operations studies were done to determine emplacement/deployment maintenance/servicing, and startup/shutdown requirements. Technology development roadmaps were written for each candidate power system (included in Volume 2). Example power system architectures were defined and compared on a mass basis. The dynamic isotope power system and nuclear reactor power system architectures had significantly lower total masses than the photovoltaic system architectures. Integrated development and deployment time phasing plans were completed for an example DIPS and reactor architecture option to determine the development strategies required to meet the mission scenario requirements.

  5. Automatic Voltage Control (AVC) of Danish Transmission System - Concept design

    DEFF Research Database (Denmark)

    Qin, Nan; Abildgaard, Hans; Lund, P.

    2014-01-01

    , objectives, constraints, algorithms for optimal power flow and some special functions in particular systems, which inspires the concept design of a Danish AVC system to address the future challenges of voltage control. In the concept, the Danish AVC design is based on a centralized control scheme. All....... Another consequence is the public way of generally thinking green which have led to a national decision of undergrounding not only all of the Danish distribution system but also the future transmission system. These issues initiate the infrastructure constructions of the transmission system i.e. a large...... the substation loses the telecommunications to the control center. RPCs will be integrated to the AVC system as normative regulators in the later stage. Distributed generation units can be organized as virtual power plants and participate in voltage control at transmission level. Energinet.dk as the Danish TSO...

  6. Construction of life cycle assessment software system platform

    Institute of Scientific and Technical Information of China (English)

    ZHANG Ya-ping; ZUO Yu-hui

    2007-01-01

    There has not been life cycle assessment (LCA) software applicable to China's products. To faciliate the develop-ment of LCA software system in China, we built an object-oriented LCA software system plantform based on LCA international standards ISO 14040 to ISO 14043 and the commonness of diverse products. The system includes six modules: disassembly module, data collection module, arithmetic module, drawing module, database module and control module. It evaluates all economic and environmental impacts during the whole life cycle of a product. The integrated life cycle inventory database system allows dynamic expansion, which makes the effort required for data collection reduce with the increase of the system's application. With the improvement of human environmental-awareness, the demand of environment-friendly products is increasing, and ecological design of products has become a critical part in products development. Consummation of the LCA software system will provide a powerful tool for designing and developing Chinese ecological products.

  7. Control Systems for Platform Landings Cushioned by Air Bags

    Science.gov (United States)

    1987-07-01

    feedback control system (39) displayed behavior quite different from the other two controls. Many different pairs of values for Pi and P2 were found that...those of the paramameters. The control instructions, starting at line 23, are for the particular feedback control * " system studied in the report... feedback control system , see Equation (39) Pa Standard atmospheric pressure PC Critical (sonic) pressure in vent Q Dimensionless air-speed in vent q Air

  8. Towards Platform Independent Database Modelling in Enterprise Systems

    OpenAIRE

    Ellison, Martyn Holland; Calinescu, Radu; Paige, Richard F.

    2016-01-01

    Enterprise software systems are prevalent in many organisations, typically they are data-intensive and manage customer, sales, or other important data. When an enterprise system needs to be modernised or migrated (e.g. to the cloud) it is necessary to understand the structure of this data and how it is used. We have developed a tool-supported approach to model database structure, query patterns, and growth patterns. Compared to existing work, our tool offers increased system support and exten...

  9. Mesozoic carbonate-siliciclastic platform to basin systems of a South Tethyan margin (Egypt, East Mediterranean)

    Science.gov (United States)

    Tassy, Aurélie; Crouzy, Emmanuel; Gorini, Christian; Rubino, Jean-Loup

    2015-04-01

    The Mesozoïc Egyptian margin is the south margin of a remnant of the Neo-Tethys Ocean, at the African northern plate boundary. East Mediterranean basin developed during the late Triassic-Early Jurassic rifting with a NW-SE opening direction (Frizon de Lamotte et al., 2011). During Mesozoïc, Egypt margin was a transform margin with a NW-SE orientation of transform faults. In the Eastern Mediterranean basin, Mesozoïc margins are characterized by mixed carbonate-siliciclastics platforms where subsidence and eustacy are the main parameters controlling the facies distribution and geometries of the platform-to-basin transition. Geometries and facies on the platform-slope-basin system, today well constrained on the Levant area, where still poorly known on the Egyptian margin. Geometries and stratigraphic architecture of the Egyptian margin are revealed, thanks to a regional seismic and well data-base provided by an industrial-academic group (GRI, Total). The objective is to understand the sismostratigraphic architecture of the platform-slope-basin system in a key area from Western Desert to Nile delta and Levant margin. Mapping of the top Jurassic and top Cretaceous show seismic geomorphology of the margin, with the cartography of the hinge line from Western Desert to Sinaï. During the Jurassic, carbonate platform show a prograding profile and a distally thickening of the external platform, non-abrupt slope profiles, and palaeovalleys incisions. Since the Cretaceous, the aggrading and retrograding mixed carbonate-siliciclastic platform show an alternation of steep NW-SE oblique segments and distally steepened segments. These structures of the platform edge are strongly controlled by the inherited tethyan transform directions. Along the hinge line, embayments are interpreted as megaslides. The basin infilling is characterised by an alternation of chaotic seismic facies and high amplitude reflectors onlaping the paleoslopes. MTC deposits can mobilize thick sedimentary

  10. THE CONCEPT OF INTEGRATED ENGINEERING AND BUSINESS (EB EDUCATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Michał Charlak

    2013-12-01

    Full Text Available In our approach to engineering and business education system an engineer is a man working as creator and user of technical products. We stress that the process of understanding and gaining knowledge of technical reality and creativity of engineers are the essential for EB concept . Next, we describe briefly three perspectives for building the system of innovative product origination as a basis for EB system: 1 designer’s perspective; 2 business perspective. 3 consumer perspective.

  11. The Health Systems Funding Platform: Is this where we thought we were going?

    Directory of Open Access Journals (Sweden)

    Ooms Gorik

    2011-05-01

    Full Text Available Abstract Background In March 2009, the Task Force for Innovative International Financing for Health Systems recommended "a health systems funding platform for the Global Fund, GAVI Alliance, the World Bank and others to coordinate, mobilize, streamline and channel the flow of existing and new international resources to support national health strategies." Momentum to establish the Health Systems Funding Platform was swift, with the World Bank convening a Technical Workshop on Health Systems Strengthening (HSS, and serial meetings organized to progress the agenda. Despite its potential significance, there has been little comment in peer-reviewed literature, though some disquiet in the international development community around the scope of the Platform and the capacity of the partners, which appears disproportionate to the available information. Methods This case study uses documentary analysis, participant observation and 24 in-depth interviews to examine the processes of development and key issues raised by the Platform. Results The findings show a fluid and volatile process, with debate over whether ongoing engagement in HSS by Global Fund and GAVI represents a dilution of organizational focus, risking ongoing support, or a paradigm shift that facilitates the achievement of targeted objectives, builds systems capacity, and will attract additional resources. Uncertainty in the development of the Platform reflects the flexibility of the recently formed global health initiatives, and the instability of donor commitments, particularly in the current financial climate. But implicit in the conflict is tension between key global stakeholders over defining and ownership of the health systems agenda. Conclusions The tensions appear to have been resolved through a focus on national planning, applying International Health Partnership principles, though the global financial crisis and key personnel changes may yet alter outcomes. Despite its dynamic

  12. Quantum Dot Systems: a versatile platform for quantum simulations

    NARCIS (Netherlands)

    Barthelemy, P.J.C.; Vandersypen, L.M.K.

    2013-01-01

    Quantum mechanics often results in extremely complex phenomena, especially when the quantum system under consideration is composed of many interacting particles. The states of these many-body systems live in a space so large that classical numerical calculations cannot compute them. Quantum simulati

  13. Quantum Dot Systems: a versatile platform for quantum simulations

    NARCIS (Netherlands)

    Barthelemy, P.J.C.; Vandersypen, L.M.K.

    2013-01-01

    Quantum mechanics often results in extremely complex phenomena, especially when the quantum system under consideration is composed of many interacting particles. The states of these many-body systems live in a space so large that classical numerical calculations cannot compute them. Quantum

  14. The Practice Teaching Platform and System for Innovating Talents and Performing Research

    Science.gov (United States)

    Wang, Boyu; Hao, Ziqiang

    2014-01-01

    The practice education is an important part of higher educational system and an important approach to cultivating applied innovative talents. This paper studies practice of teaching platform and practical teaching system for the research and practice based on the objective basis of applied innovative talents and the basic characteristics of the…

  15. The Relationship between Chief Information Officer Transformational Leadership and Computing Platform Operating Systems

    Science.gov (United States)

    Anderson, George W.

    2010-01-01

    The purpose of this study was to relate the strength of Chief Information Officer (CIO) transformational leadership behaviors to 1 of 5 computing platform operating systems (OSs) that may be selected for a firm's Enterprise Resource Planning (ERP) business system. Research shows executive leader behaviors may promote innovation through the use of…

  16. The Relationship between Chief Information Officer Transformational Leadership and Computing Platform Operating Systems

    Science.gov (United States)

    Anderson, George W.

    2010-01-01

    The purpose of this study was to relate the strength of Chief Information Officer (CIO) transformational leadership behaviors to 1 of 5 computing platform operating systems (OSs) that may be selected for a firm's Enterprise Resource Planning (ERP) business system. Research shows executive leader behaviors may promote innovation through the use of…

  17. Research on application information system integration platform in medicine manufacturing enterprise.

    Science.gov (United States)

    Deng, Wu; Zhao, Huimin; Zou, Li; Li, Yuanyuan; Li, Zhengguang

    2012-08-01

    Computer and information technology popularizes in the medicine manufacturing enterprise for its potentials in working efficiency and service quality. In allusion to the explosive data and information of application system in current medicine manufacturing enterprise, we desire to propose a novel application information system integration platform in medicine manufacturing enterprise, which based on a combination of RFID technology and SOA, to implement information sharing and alternation. This method exploits the application integration platform across service interface layer to invoke the RFID middleware. The loose coupling in integration solution is realized by Web services. The key techniques in RFID event components and expanded role-based security access mechanism are studied in detail. Finally, a case study is implemented and tested to evidence our understanding on application system integration platform in medicine manufacturing enterprise.

  18. Concepts in context: Processing mental state concepts with internal or external focus involves different neural systems.

    Science.gov (United States)

    Oosterwijk, Suzanne; Mackey, Scott; Wilson-Mendenhall, Christine; Winkielman, Piotr; Paulus, Martin P

    2015-01-01

    According to embodied cognition theories, concepts are contextually situated and grounded in neural systems that produce experiential states. This view predicts that processing mental state concepts recruits neural regions associated with different aspects of experience depending on the context in which people understand a concept. This neuroimaging study tested this prediction using a set of sentences that described emotional (e.g., fear, joy) and nonemotional (e.g., thinking, hunger) mental states with internal focus (i.e., focusing on bodily sensations and introspection) or external focus (i.e., focusing on expression and action). Consistent with our predictions, data suggested that the inferior frontal gyrus, a region associated with action representation, was engaged more by external than internal sentences. By contrast, the ventromedial prefrontal cortex, a region associated with the generation of internal states, was engaged more by internal emotion sentences than external sentence categories. Similar patterns emerged when we examined the relationship between neural activity and independent ratings of sentence focus. Furthermore, ratings of emotion were associated with activation in the medial prefrontal cortex, whereas ratings of activity were associated with activation in the inferior frontal gyrus. These results suggest that mental state concepts are represented in a dynamic way, using context-relevant interoceptive and sensorimotor resources.

  19. The System Concept and Its Application to Engineering

    CERN Document Server

    Aslaksen, Erik W

    2013-01-01

    Systems engineering is a mandatory approach in some industries, and is gaining wider acceptance for complex projects in general. However, under the imperative of delivering these projects on time and within budget, the focus has been mainly on the management aspects, with less attention to improving the core engineering activity – design. This book addresses the application of the system concept to design in several ways: by developing a deeper understanding of the system concept, by defining design and its characteristics within the process of engineering, and by applying the system concept to the early stage of design, where it has the greatest impact.   A central theme of the book is that the purpose of engineering is to be useful in meeting the needs of society, and that therefore the ultimate measure of the benefit of applying the system concept should be the extent to which it advances the achievement of that purpose. Consequently, any consistent, top-down development of the functionality required of...

  20. Cell-based microfluidic platform for mimicking human olfactory system.

    Science.gov (United States)

    Lee, Seung Hwan; Oh, Eun Hae; Park, Tai Hyun

    2015-12-15

    Various attempts have been made to mimic the human olfactory system using human olfactory receptors (hORs). In particular, OR-expressed cell-based odorant detection systems mimic the smell sensing mechanism of humans, as they exploit endogenous cellular signaling pathways. However, the majority of such cell-based studies have been performed in the liquid phase to maintain cell viability, and liquid odorants were used as detection targets. Here, we present a microfluidic device for the detection of gaseous odorants which more closely mimics the human olfactory system. Cells expressing hOR were cultured on a porous membrane. The membrane was then flipped over and placed between two compartments. The upper compartment is the gaseous part where gaseous odorants are supplied, while the lower compartment is the aqueous part where viable cells are maintained in the liquid medium. Using this simple microfluidic device, we were able to detect gaseous odorant molecules by a fluorescence signal. The fluorescence signal was generated by calcium influx resulting from the interaction between odorant molecules and the hOR. The system allowed detection of gaseous odorant molecules in real-time, and the findings showed that the fluorescence responses increased dose-dependently in the range of 0-2 ppm odorant. In addition, the system can discriminate among gaseous odorant molecules. This microfluidic system closely mimics the human olfactory system in the sense that the submerged cells detect gaseous odorants.

  1. Development of Jacket Platform Tsunami Risk Rating System in Waters Offshore North Borneo

    Institute of Scientific and Technical Information of China (English)

    HE Lee; MS Liew; NH Mardi; KL Na; Iraj Toloue; SK Wong

    2016-01-01

    This work details the simulation of tsunami waves generated by seaquakes in the Manila Trench and their effect on fixed oil and gas jacket platforms in waters offshore North Borneo. For this study, a four-leg living quarter jacket platform located in a water depth of 63m is modelled in SACS v5.3. Malaysia has traditionally been perceived to be safe from the hazards of earthquakes and tsunamis. Local design practices tend to neglect tsunami waves and include no such provisions. In 2004, a 9.3Mw seaquake occurred off the northwest coast of Aceh, which generated tsunami waves that caused destruction in Malaysia totalling US$25 million and 68 deaths. This event prompted an awareness of the need to study the reliability of fixed offshore platforms scattered throughout Malaysian waters. In this paper, we present a review of research on the seismicity of the Manila Trench, which is perceived to be high risk for Southeast Asia. From the tsunami numerical model TUNA-M2, we extract computer-simulated tsunami waves at prescribed grid points in the vicinity of the platforms in the region. Using wave heights as input, we simulate the tsunami using SACS v5.3 structural analysis software of offshore platforms, which is widely accepted by the industry. We employ the nonlinear solitary wave theory in our tsunami loading calculations for the platforms, and formulate a platform-specific risk quantification system. We then perform an intensive structural sensitivity analysis and derive a corresponding platform-specific risk rating model.

  2. Development of jacket platform tsunami risk rating system in waters offshore North Borneo

    Science.gov (United States)

    Lee, H. E.; Liew, M. S.; Mardi, N. H.; Na, K. L.; Toloue, Iraj; Wong, S. K.

    2016-09-01

    This work details the simulation of tsunami waves generated by seaquakes in the Manila Trench and their effect on fixed oil and gas jacket platforms in waters offshore North Borneo. For this study, a four-leg living quarter jacket platform located in a water depth of 63m is modelled in SACS v5.3. Malaysia has traditionally been perceived to be safe from the hazards of earthquakes and tsunamis. Local design practices tend to neglect tsunami waves and include no such provisions. In 2004, a 9.3 M w seaquake occurred off the northwest coast of Aceh, which generated tsunami waves that caused destruction in Malaysia totalling US 25 million and 68 deaths. This event prompted an awareness of the need to study the reliability of fixed offshore platforms scattered throughout Malaysian waters. In this paper, we present a review of research on the seismicity of the Manila Trench, which is perceived to be high risk for Southeast Asia. From the tsunami numerical model TUNA-M2, we extract computer-simulated tsunami waves at prescribed grid points in the vicinity of the platforms in the region. Using wave heights as input, we simulate the tsunami using SACS v5.3 structural analysis software of offshore platforms, which is widely accepted by the industry. We employ the nonlinear solitary wave theory in our tsunami loading calculations for the platforms, and formulate a platform-specific risk quantification system. We then perform an intensive structural sensitivity analysis and derive a corresponding platform-specific risk rating model.

  3. The Max Launch Abort System - Concept, Flight Test, and Evolution

    Science.gov (United States)

    Gilbert, Michael G.

    2014-01-01

    The NASA Engineering and Safety Center (NESC) is an independent engineering analysis and test organization providing support across the range of NASA programs. In 2007 NASA was developing the launch escape system for the Orion spacecraft that was evolved from the traditional tower-configuration escape systems used for the historic Mercury and Apollo spacecraft. The NESC was tasked, as a programmatic risk-reduction effort to develop and flight test an alternative to the Orion baseline escape system concept. This project became known as the Max Launch Abort System (MLAS), named in honor of Maxime Faget, the developer of the original Mercury escape system. Over the course of approximately two years the NESC performed conceptual and tradeoff analyses, designed and built full-scale flight test hardware, and conducted a flight test demonstration in July 2009. Since the flight test, the NESC has continued to further develop and refine the MLAS concept.

  4. System-Oriented Runway Management Concept of Operations

    Science.gov (United States)

    Lohr, Gary W.; Atkins, Stephen

    2015-01-01

    This document describes a concept for runway management that maximizes the overall efficiency of arrival and departure operations at an airport or group of airports. Specifically, by planning airport runway configurations/usage, it focuses on the efficiency with which arrival flights reach their parking gates from their arrival fixes and departure flights exit the terminal airspace from their parking gates. In the future, the concept could be expanded to include the management of other limited airport resources. While most easily described in the context of a single airport, the concept applies equally well to a group of airports that comprise a metroplex (i.e., airports in close proximity that share resources such that operations at the airports are at least partially dependent) by including the coordination of runway usage decisions between the airports. In fact, the potential benefit of the concept is expected to be larger in future metroplex environments due to the increasing need to coordinate the operations at proximate airports to more efficiently share limited airspace resources. This concept, called System-Oriented Runway Management (SORM), is further broken down into a set of airport traffic management functions that share the principle that operational performance must be measured over the complete surface and airborne trajectories of the airport's arrivals and departures. The "system-oriented" term derives from the belief that the traffic management objective must consider the efficiency of operations over a wide range of aircraft movements and National Airspace System (NAS) dynamics. The SORM concept is comprised of three primary elements: strategic airport capacity planning, airport configuration management, and combined arrival/departure runway planning. Some aspects of the SORM concept, such as using airport configuration management1 as a mechanism for improving aircraft efficiency, are novel. Other elements (e.g., runway scheduling, which is a part

  5. Method and system for providing autonomous control of a platform

    Science.gov (United States)

    Seelinger, Michael J. (Inventor); Yoder, John-David (Inventor)

    2012-01-01

    The present application provides a system for enabling instrument placement from distances on the order of five meters, for example, and increases accuracy of the instrument placement relative to visually-specified targets. The system provides precision control of a mobile base of a rover and onboard manipulators (e.g., robotic arms) relative to a visually-specified target using one or more sets of cameras. The system automatically compensates for wheel slippage and kinematic inaccuracy ensuring accurate placement (on the order of 2 mm, for example) of the instrument relative to the target. The system provides the ability for autonomous instrument placement by controlling both the base of the rover and the onboard manipulator using a single set of cameras. To extend the distance from which the placement can be completed to nearly five meters, target information may be transferred from navigation cameras (used for long-range) to front hazard cameras (used for positioning the manipulator).

  6. Transactive Systems Simulation and Valuation Platform Trial Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Widergren, Steven E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hammerstrom, Donald J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Qiuhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kalsi, Karanjit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lian, Jianming [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Makhmalbaf, Atefe [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McDermott, Thomas E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sivaraman, Deepak [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tang, Yingying [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Veeramany, Arun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Woodward, James C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-04-01

    Transactive energy systems use principles of value to coordinate responsive supply and demand in energy systems. Work continues within the Transactive Systems Program, which is funded by the U.S. Department of Energy at Pacific Northwest National Laboratory, to understand the value of, understand the theory behind, and simulate the behaviors of transactive energy systems. This report summarizes recent advances made by this program. The main capability advances include a more comprehensive valuation model, including recommended documentation that should make valuation studies of all sorts more transparent, definition of economic metrics with which transactive mechanisms can be evaluated, and multiple improvements to the time-simulation environment that is being used to evaluate transactive scenarios.

  7. A novel platform for internet-based mobile robot systems

    OpenAIRE

    Duong, P. M.; Hoang, T. T.; Van, N. T. T.; Viet, D. A.; Vinh, T. Q.

    2016-01-01

    In this paper, we introduce a software and hardware structure for on-line mobile robotic systems. The hardware mainly consists of a Multi-Sensor Smart Robot connected to the Internet through 3G mobile network. The system employs a client-server software architecture in which the exchanged data between the client and the server is transmitted through different transport protocols. Autonomous mechanisms such as obstacle avoidance and safe-point achievement are implemented to ensure the robot sa...

  8. Interactive asthma learning system utilizing a mobile phone platform.

    Science.gov (United States)

    Wood, Jeffrey; Yablochnikov, Ilya; Finkelstein, Joseph

    2008-11-06

    We developed an interactive patient learning system for use on mobile phones to inform an asthma patient about this chronic condition and enforce knowledge retention by questioning the user. The system uses a mobile phone's Internet connection to retrieve information from a database and download recorded audio files corresponding to asthma information screens. The mobile application was successfully developed, implemented, and tested on the Motorola i730 mobile phone with Nextel as a service provider.

  9. Tracking control strategy for the optoelectronic system on the flexible suspended platform based on backstepping method

    Science.gov (United States)

    Yu, Wei; Ma, Jiaguang; Xiao, Jing

    2012-10-01

    To improve the optoelectronic tracking ability and rope-hanged platform attitude stability, against the interact effect between rope-hanged platform and optoelectronic system during system tracking process, the optoelectronic system fixed on rope hanged platform simplified dynamic model, according to the system's Lagrange dynamic model, was established. Backstepping method was employed to design an integrated controller for both optoelectronic system azimuth direction steering and platform attitude stabilizing. To deal with model's uncertainty and disturbance, a sliding mode controller form based exponential reaching law was adopted to structure the integrated controller. Simulation experiments simulated an optoelectronic system with 600mm caliber telescope, whose inertia fluctuation is 6%. The maximal control moment is 15Nm. And the external disturbance and internal friction effected together. When the line of sight(LOS) azimuth angular input is a step signal with 1rad amplitude, the response's overshoot is 6%, and the response time is 6.2s, and the steady state error is less than 4×10-4rad. When the input is a sinusoidal signal of 0.2rad amplitude with 0.0318Hz frequency, the LOS azimuth angular error amplitude is 5. 6×10-4rad. It is concluded that the controller designed in this article has excellent ability and can ensure the system's stability.

  10. A Multi-Interface Platform System for Assistance and Evaluation of Disabled People

    Directory of Open Access Journals (Sweden)

    Chadi Fouad Riman

    2011-01-01

    Full Text Available In this work, an evaluation and assistance platform for people with disabilities is presented. This platform allows the control of different systems (PC games, robot, electric wheelchair using different interfaces (mouse, joystick, etc.. The software facilitates the saving of experimental data for analysis, it can be automatically reconfigured to match user’s ability, and it is operated locally or remotely through the internet. Quantitative indicators are defined for evaluation purposes and to determine the needed assistance and adaptation. The system is tested and results are presented and discussed.

  11. Operation safety of complex industrial systems. Main concepts; Surete de fonctionnement des systemes industriels complexes. Principaux concepts

    Energy Technology Data Exchange (ETDEWEB)

    Zwingelstein, G

    2009-06-15

    Operation safety consists in knowing, evaluating, foreseeing, measuring and mastering the technological system and human failures in order to avoid their impacts on health and people's safety, on productivity, and on the environment, and to preserve the Earth's resources. This article recalls the main concepts of operation safety: 1 - evolutions in the domain; 2 - failures, missions and functions of a system and of its components: functional failure, missions and functions, industrial processes, notions of probability; 3 - basic concepts and operation safety: reliability, unreliability, failure density, failure rate, relations between them, availability, maintainability, safety. (J.S.)

  12. LLNL current meter array--concept and system description

    Energy Technology Data Exchange (ETDEWEB)

    Mantrom, D.D. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    A measurement capability using a horizontal array of 10 S4 current meters mounted on a stiff floating structure with 35 m aperture has been developed to support interpretation of radar imaging of surface effects associated with internal waves. This system has been fielded three times and most recently, has collected data alongside the sea-surface footprint of a land-fixed radar imaging ship-generated internal waves. The underlying need for this measurement capability is described. The specifications resulting from this need are presented and the engineering design and deployment procedures of the platform and systems that resulted are described The current meter data are multiplexed along with meteorological and system status data on board the floating platform and are telemetered to a shore station and on to a data acquisition system. The raw data are recorded, and are then processed to form space-time images of current and strain rate (a spatial derivative of the current field). Examples of raw and processed data associated with ship-generated internal waves are presented.

  13. Formation of concept of decimal system in Mexican school children

    Directory of Open Access Journals (Sweden)

    L. Quintanar Rojas

    2013-04-01

    Full Text Available The present study deals with initial formation of concept of decimal system in second year of education at primary school in Mexico (City of Puebla. Our research is based on Activity Theory conception of teaching-learning process and of gradual introduction of scientific concepts in school age. The method has been designed and worked out with the help of actions in which logic, symbolic, spatial and mathematical aspects were implemented. All actions were introduced within divided activity of children in group guided by adult. A pretest-posttest design was used with an experimental group of Mexican school children. The results showed that children have developed the significant skills necessary for understanding the concept of decimal number system. They were also able to apply this concept for new kind if activity al the end of school year. Such new activity was solving of mathematic problems, which was not included in official school program. We consider that proposed method can be an approximation for solution of common difficulties which arise at primary school concerning teaching of mathematics.

  14. Research on Collaboration Theory of Distributed Measurement System and Real-Time of Communication Platform

    Institute of Scientific and Technical Information of China (English)

    SHEN Yan

    2005-01-01

    @@ With developments of technology of computer and network, researching on distributed measurement system becomes one of the hot problems in the field of automatic test. However, existing resolutions to distributed measurement system still have great limit,e.g. intelligence, self-adaptivity, collaboration, system load balance and integer view, and their capabilities need to be enhanced. Based on two key projects, this paper studies on collaboration mechanism and real-time of communication platform in distributed measurement system comprehensively and systematically.

  15. Development of an Intelligent Maximum Power Point Tracker Using an Advanced PV System Test Platform

    DEFF Research Database (Denmark)

    Spataru, Sergiu; Amoiridis, Anastasios; Beres, Remus Narcis

    2013-01-01

    The performance of photovoltaic systems is often reduced by the presence of partial shadows. The system efficiency and availability can be improved by a maximum power point tracking algorithm that is able to detect partial shadow conditions and to optimize the power output. This work proposes an ...... photovoltaic inverter system test platform that is able to reproduce realistic partial shadow conditions, both in simulation and on hardware test system....

  16. Review and appraisal of concept of sustainable food production systems

    Science.gov (United States)

    Brklacich, Michael; Bryant, Christopher R.; Smit, Barry

    1991-01-01

    Environmental degradation, competition for resources, increasing food demands, and the integration of agriculture into the international economy threaten the sustainability of many food production systems. Despite these concerns, the concept of sustainable food production systems remains unclear, and recent attempts to appraise sustainability have been hampered by conceptual inconsistencies and the absence of workable definitions. Six perspectives are shown to underpin the concept. Environmental accounting identifies biophysical limits for agriculture. Sustained yield refers to output levels that can be maintained continuously. Carrying capacity defines maximum population levels that can be supported in perpetuity. Production unit viability refers to the capacity of primary producers to remain in agriculture. Product supply and security focuses on the adequacy of food supplies. Equity is concerned with the spatial and temporal distribution of products dervied from resource use. Many studies into sustainable agriculture cover more than one of these perspectives, indicating the concept is complex and embraces issues relating to the biophysical, social, and economic environments. Clarification of the concept would facilitate the development of frameworks and analytical systems for appraising the sustainability of food production systems.

  17. Mars Surveyor '98 MVACS Robotic Arm Control System Design Concepts

    Science.gov (United States)

    Bonitz, Robert G.

    1997-01-01

    This paper describes the control system design concepts for the Mars Volatiles and Climate Surveyor (MVACS) Robotic Arm which supports the scientific investigations to be conducted as part of the Mars Surveyor '98 Lander project. Novel solutions are presented to some of the unique problems encountered in this demanding space application with its tight constraints on mass, power, volume, and computing power.

  18. Design and Development of a Rapid Research, Design, and Development Platform for In-Situ Testing of Tools and Concepts for Trajectory-Based Operations

    Science.gov (United States)

    Underwood, Matthew C.

    2017-01-01

    To provide justification for equipping a fleet of aircraft with avionics capable of supporting trajectory-based operations, significant flight testing must be accomplished. However, equipping aircraft with these avionics and enabling technologies to communicate the clearances required for trajectory-based operations is cost-challenging using conventional avionics approaches. This paper describes an approach to minimize the costs and risks of flight testing these technologies in-situ, discusses the test-bed platform developed, and highlights results from a proof-of-concept flight test campaign that demonstrates the feasibility and efficiency of this approach.

  19. Research and implementation of comprehensive situation sub-system in simulation platform of multiple UAVs

    Science.gov (United States)

    Hua, Siliang; Huang, Siniu; Chen, Zongji

    2006-11-01

    Cooperative formation flight of Unmanned Air Vehicles (UAVs) becomes an attractive research field in recent years. The Simulation Platform of Multiple UAVs is a distributed interactive simulation environment based on High Level Architecture (HLA), which provides a universal simulation platform for the research of multiple UAVs, such as cooperative control, formation flight, mission planning, etc. The platform is composed of several nodes: Mission Control Station (MCS), Formation Control Unit (FCU), UAV Platform, Comprehensive Situation Display, 3-Dimension Display and Simulation Management. As an integral part of the simulation platform, the comprehensive situation sub-system monitors the geography environment and the situation of entities in the simulation. The sub-system is integrated into several nodes of the simulation platform: MCS, FCU and 2-Dimention Situation Display, etc. Considering generalized method and component-based rule, we design and implement comprehensive situation sub-system as well as supporting tool kits. It includes digital map walkthrough environment, map editor with Digital Elevation Model (DEM), bitmap creator, network communication module, situation display module and scenario editor module. Digital map walkthrough environment is a Geographic Information System (GIS) with specific functions, including multiple windows display, map walkthrough and data management. Map editor and bitmap creator create different type of digital map, which is suited for demands of the simulation, and generate terrain data for the UAVs to execute route planning based on DEM. Situation display module displays the situation information of entities in the simulation dynamically and timely. The system is developed without commercial GIS components, and integrated into the environment smoothly.

  20. Design of Objects Tracking System Based on ARM Embedded Platform

    Institute of Scientific and Technical Information of China (English)

    XU Mei; SONG Yong-duan; LV Shao-dong; LIU Zhi-long; HUANG Cong-ying

    2014-01-01

    In recent years, according to the need of intelligent video surveillance system increasing rapidly in metropolitan cities ,a design based on S3C2440 microprocessor and embedded Linux operating system is adopted for real-time video target tracking. However, it is very challenging as embedded systems usually afford limited processing power and limited resources. Therefore, to address this problem, a real-time tracking algorithm using multi-features based on compressive sensing is proposed and implemented. The algorithm uses multiple matrix as the projection matrix of the compressive sensing and the compressed date as the multiple features to extract useful information needed by tracking process. Functions and libraries in OpenCV which were developed by Intel Corporation are utilized for building the tracking algorithms. It is tested with variant video sequences and the results show that the algorithm achieves stable tracking for the target moved of the light changed.

  1. ITER Fast Plant System Controller prototype based on PXIe platform

    Energy Technology Data Exchange (ETDEWEB)

    Ruiz, M., E-mail: mariano.ruiz@upm.es [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, CAEND CSIC-UPM Universidad Politecnica de Madrid, Crta. Valencia Km-7, Madrid 28031 (Spain); Vega, J.; Castro, R. [Asociacion EURATOM/CIEMAT para Fusion, Madrid (Spain); Sanz, D.; Lopez, J.M.; Arcas, G. de; Barrera, E.; Nieto, J. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, CAEND CSIC-UPM Universidad Politecnica de Madrid, Crta. Valencia Km-7, Madrid 28031 (Spain); Goncalves, B.; Sousa, J.; Carvalho, B. [Associacao EURATOM/IST, Lisbon (Portugal); Utzel, N.; Makijarvi, P. [ITER Organization, CS 90 046, 13067 St. Paul lez Durance Cedex (France)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Implementation of Fast Plant System Controller (FPSC) for ITER CODAC. Black-Right-Pointing-Pointer Efficient data acquisition and data movement using EPICS. Black-Right-Pointing-Pointer Performance of PCIe technologies in the implementation of FPSC. - Abstract: The ITER Fast Plant System Controller (FPSC) is based on embedded technologies. The FPSC will be devoted to both data acquisition tasks (sampling rates higher than 1 kHz) and control purposes (feedback loop actuators). Some of the essential requirements of these systems are: (a) data acquisition and data preprocessing; (b) interfacing with different networks and high speed links (Plant Operation Network, timing network based on IEEE1588, synchronous data transference and streaming/archiving networks); and (c) system setup and operation using EPICS (Experimental Physics and Industrial Control System) process variables. CIEMAT and UPM have implemented a prototype of FPSC using a PXIe (PCI eXtension for Instrumentation) form factor in a R and D project developed in two phases. The paper presents the main features of the two prototypes developed that have been named alpha and beta. The former was implemented using LabVIEW development tools as it was focused on modeling the FPSC software modules, using the graphical features of LabVIEW applications, and measuring the basic performance in the system. The alpha version prototype implements data acquisition with time-stamping, EPICS monitoring using waveform process variables (PVs), and archiving. The beta version prototype is a complete IOC implemented using EPICS with different software functional blocks. These functional blocks are integrated and managed using an ASYN driver solution and provide the basic functionalities required by ITER FPSC such as data acquisition, data archiving, data pre-processing (using both CPU and GPU) and streaming.

  2. DMIA: A MALWARE DETECTION SYSTEM ON IOS PLATFORM

    Directory of Open Access Journals (Sweden)

    Hongliang Liang

    2016-12-01

    Full Text Available iOS is a popular operating system on Apple’s smartphones, and recent security events have shown the possibility of stealing the users' privacy in iOS without being detected, such as XcodeGhost. So, we present the design and implementation of a malware vetting system, called DMIA. DMIA first collects runtime information of an app and then distinguish between malicious and normal apps by a novel machine learning model. We evaluated DMIA with 1000 apps from the official App Store. The results of experiments show that DMIA is effective in detecting malwares aimed to steal privacy.

  3. Changes in pilot control behaviour across Stewart platform motion systems

    NARCIS (Netherlands)

    Nieuwenhuizen, F.M.

    2012-01-01

    Flight simulators provide an effective, efficient, and safe environment for practising flight-critical manoeuvres without requiring a real aircraft. Most simulators are equipped with a Stewart-type motion system, which consists of six linear actuators in a hexapod configuration. The argument for use

  4. Changes in pilot control behaviour across Stewart platform motion systems

    NARCIS (Netherlands)

    Nieuwenhuizen, F.M.

    2012-01-01

    Flight simulators provide an effective, efficient, and safe environment for practising flight-critical manoeuvres without requiring a real aircraft. Most simulators are equipped with a Stewart-type motion system, which consists of six linear actuators in a hexapod configuration. The argument for use

  5. Modelling, analysis and optimisation of energy systems on offshore platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van

    Nowadays, the offshore production of oil and gas requires on-site processing, which includes operations such as separation, compression and purification. The offshore system undergoes variations of the petroleum production rates over the field life – it is therefore operated far from its nominal ...

  6. A Model-Based Method to Design an Application Common Platform for Enterprise Information Systems

    Science.gov (United States)

    Ishihara, Akira; Furuta, Hirohisa; Yamaoka, Takayuki; Seo, Kazuo; Nishida, Shogo

    This paper presents a model-based method to design a software platform, called an application common platform for developments of enterprise information systems. This application common platform(ACP) wraps existing reusable software assets to hide their details from application developers and provide domain level application programming interfaces, so that reusability of software assets and productivity of application improve. In this paper, we present a software architecture which organizes applications, ACP, and software assets and illustrate a development process of ACP. Especially, we show design rules to derive ACP design models from application design models and software assets design models. We also define metrics of reusability and productivity and evaluate the proposed method through real developments of enterprise information systems. As a result, the proposed method reduced 20% of development cost compared to estimation cost.

  7. New Concepts and methods for developing shop floor control systems

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen; Bilberg, Arne; Alting, Leo

    1998-01-01

    concept reduces the effort for providing and operating high quality and high functionality cell control solutions for the industry. The plans for the next generation industrial shop floor and cell controllers are to develop new concepts based on more distributed systems, which are more robust and agile......An industrial research project defines models and methods for design and implementation of computer based control and monitoring systems for production cells. This is primarily documented within automated robot welding cells in the shipbuilding industry. In order to support engineering of cell...... control systems by the use of enablers, a generic cell control data model and an architecture has been defined. Further an engineering methodology is defined. It is concluded that cell control technology provides for increased performance in production systems, and that the cell control engineering...

  8. New Concepts and methods for developing shop floor control systems

    DEFF Research Database (Denmark)

    Lynggaard, Hans Jørgen; Bilberg, Arne; Alting, Leo

    1998-01-01

    An industrial research project defines models and methods for design and implementation of computer based control and monitoring systems for production cells. This is primarily documented within automated robot welding cells in the shipbuilding industry. In order to support engineering of cell...... control systems by the use of enablers, a generic cell control data model and an architecture has been defined. Further an engineering methodology is defined. It is concluded that cell control technology provides for increased performance in production systems, and that the cell control engineering...... concept reduces the effort for providing and operating high quality and high functionality cell control solutions for the industry. The plans for the next generation industrial shop floor and cell controllers are to develop new concepts based on more distributed systems, which are more robust and agile...

  9. The historiographical conceptsystem of philosophy’

    DEFF Research Database (Denmark)

    Catana, Leo

    Jacob Brucker (1696-1770) established the history of philosophy as a philosophical discipline in the 1740s. In order to separate this new discipline from other historical disciplines, he introduced the historiographical conceptsystem of philosophy’. The historian of philosophy should use...... this concept as a criterion of inclusion of past philosophies, and as an ideal form of exposition. The present book describes the origin of this historiographical notion, its implicit Protestant assumptions, and it traces the concept’s impact upon the methods of history of philosophy and history of ideas......-555; P. R. Blum, in Intellectual history reivew, vol. 20.2 (2010), pp. 295-297....

  10. Three-dimensional finite element analysis of platform switched implant

    Science.gov (United States)

    2017-01-01

    PURPOSE The purpose of this study was to analyze the influence of the platform switching concept on an implant system and peri-implant bone using three-dimensional finite element analysis. MATERIALS AND METHODS Two three-dimensional finite element models for wide platform and platform switching were created. In the wide platform model, a wide platform abutment was connected to a wide platform implant. In the platform switching model, the wide platform abutment of the wide platform model was replaced by a regular platform abutment. A contact condition was set between the implant components. A vertical load of 300 N was applied to the crown. The maximum von Mises stress values and displacements of the two models were compared to analyze the biomechanical behavior of the models. RESULTS In the two models, the stress was mainly concentrated at the bottom of the abutment and the top surface of the implant in both models. However, the von Mises stress values were much higher in the platform switching model in most of the components, except for the bone. The highest von Mises values and stress distribution pattern of the bone were similar in the two models. The components of the platform switching model showed greater displacement than those of the wide platform model. CONCLUSION Due to the stress concentration generated in the implant and the prosthodontic components of the platform switched implant, the mechanical complications might occur when platform switching concept is used. PMID:28243389

  11. Health system guidance appraisal-concept evaluation and usability testing

    OpenAIRE

    2016-01-01

    Background Health system guidance (HSG) provides recommendations aimed to address health system challenges. However, there is a paucity of methods to direct, appraise, and report HSG. Earlier research identified 30 candidate criteria (concepts) that can be used to evaluate the quality of HSG and guide development and reporting requirements. The objective of this paper was to describe two studies aimed at evaluating the importance of these 30 criteria, design a draft HSG appraisal tool, and te...

  12. Design challenges in nanoparticle-based platforms: Implications for targeted drug delivery systems

    Science.gov (United States)

    Mullen, Douglas Gurnett

    Characterization and control of heterogeneous distributions of nanoparticle-ligand components are major design challenges for nanoparticle-based platforms. This dissertation begins with an examination of poly(amidoamine) (PAMAM) dendrimer-based targeted delivery platform. A folic acid targeted modular platform was developed to target human epithelial cancer cells. Although active targeting was observed in vitro, active targeting was not found in vivo using a mouse tumor model. A major flaw of this platform design was that it did not provide for characterization or control of the component distribution. Motivated by the problems experienced with the modular design, the actual composition of nanoparticle-ligand distributions were examined using a model dendrimer-ligand system. High Pressure Liquid Chromatography (HPLC) resolved the distribution of components in samples with mean ligand/dendrimer ratios ranging from 0.4 to 13. A peak fitting analysis enabled the quantification of the component distribution. Quantified distributions were found to be significantly more heterogeneous than commonly expected and standard analytical parameters, namely the mean ligand/nanoparticle ratio, failed to adequately represent the component heterogeneity. The distribution of components was also found to be sensitive to particle modifications that preceded the ligand conjugation. With the knowledge gained from this detailed distribution analysis, a new platform design was developed to provide a system with dramatically improved control over the number of components and with improved batch reproducibility. Using semi-preparative HPLC, individual dendrimer-ligand components were isolated. The isolated dendrimer with precise numbers of ligands were characterized by NMR and analytical HPLC. In total, nine different dendrimer-ligand components were obtained with degrees of purity ≥80%. This system has the potential to serve as a platform to which a precise number of functional molecules

  13. Integrating technology education concepts into China's educational system

    Science.gov (United States)

    Yang, Faxian

    The problem of this study was to develop a strategy for integrating technology education concepts within the Chinese mathematics and science curricula. The researcher used a case study as the basic methodology. It included three methods for collecting data: literature review, field study in junior and senior secondary schools in America and China, and interviews with experienced educators who were familiar with the status of technology education programs in the selected countries. The data came from the following areas: Japan, Taiwan, the United Kingdom, China, and five states in the United States: Illinois, Iowa, Maryland, Massachusetts, and New York. The researcher summarized each state and country's educational data, identified the advantages and disadvantages of their current technology education program, and identified the major concepts within each program. The process determined that identified concepts would be readily acceptable into the current Chinese educational system. Modernization of, industry, agriculture, science and technology, and defense have been recent objectives of the Chinese government. Therefore, Chinese understanding of technology, or technology education, became important for the country. However, traditional thought and culture curb the implementation of technology education within China's current education system. The proposed solution was to integrate technology education concepts into China's mathematics and science curricula. The purpose of the integration was to put new thoughts and methods into the current educational structure. It was concluded that the proposed model and interventions would allow Chinese educators to carry out the integration into China's education system.

  14. A Single Mooring System with Sag-Extensibility and Flexural Rigidity Applied to Offshore Platform

    Institute of Scientific and Technical Information of China (English)

    M.-C.Tsai; Hsien Hua Lee; Jun-Yen Lee; S.-S.Hsiao

    2013-01-01

    Floating platform system has been extensively used in ocean exploitation,particularly for a tension-leg platform (TLP) system in deep water.Most of the TLPs are multi-mooring systems,where multi-joints are connected to the tension-legs so that the platform is not allowed to twist freely and may subject to enormous force induced by large incident waves in the weak-direction of the structure.This study aims to exploit a single moored offshore platform system that may attract less force and can be operated with less effort.In our analysis,in addition to mechanical properties of the tether,two important properties are also taken into consideration for the single mooring tether with expanded cross sectional dimension and utilization of stronger material,namely,the sag-extensibility and the flexural rigidity.Finally,the dynamic structural behavior produced by the mechanical effects on the new system is investigated and compared with that of traditional design while the wave-structure interactions of large body are also accounted for.Our study finds that the neglect of sag-extensibility or the flexural rigidity of large,strong mooring cable may result in a conservative but not necessarily safe design.

  15. Networked Control System for the Guidance of a Four-Wheel Steering Agricultural Robotic Platform

    Directory of Open Access Journals (Sweden)

    Eduardo Paciência Godoy

    2012-01-01

    Full Text Available A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA. One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80 m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS. This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains.

  16. Development of space manufacturing systems concepts utilizing lunar resources

    Science.gov (United States)

    Bock, E. H.

    1979-01-01

    Results of a NASA sponsored study to evaluate the merits of constructing solar power satellites using lunar and terrestrial resources are reviewed. Three representative lunar resources utilization (LRU) concepts were developed and compared with a previously designed earth baseline concept, and major system hardware elements as well as personnel requirements were defined. LRU for space construction was shown to be competitive with earth baseline approach for a program requiring 10 to the 5th metric tons per year of completed satellites. Results also indicated that LRU can reduce earth launched cargo requirements to less than 10% of that needed to build satellites exclusively from earth materials, with a significant percentage of the reduction due to the use of liquid oxygen derived from lunar soil. A concept using the mass driver to catapult lunar material into space was found to be superior to the other LRU logistics techniques investigated.

  17. Concept Mapping: Linking Spheres in Earth System Science

    Science.gov (United States)

    Czajkowski, K. P.; Hedley, M.

    2009-12-01

    The Earth System Science Education Alliance (ESSEA) distance learning courses focus teachers on linking spheres of the earth: atmosphere, hydrosphere, lithosphere and biosphere. The University of Toledo has offered the ESSEA middle school grade course using jigsaw pedagogy nine times since 2002. Traditionally, the ESSEA course has teachers link spheres in linear causal chains. This past year we used concept mapping as a way for the teachers and pre-service students in the class to organize their study of the events: melting of ice sheets, Mt. Pinatubo eruption, Hurricane Katrina and draining of the Great Black Swamp. Concept mapping is a good way to visualize linkages between events and spheres. The outcome was that teachers and pre-service students enjoyed concept mapping, it fostered teamwork and helped with grading the material.

  18. Concepts and implementations of natural language query systems

    Science.gov (United States)

    Dominick, Wayne D. (Editor); Liu, I-Hsiung

    1984-01-01

    The currently developed user language interfaces of information systems are generally intended for serious users. These interfaces commonly ignore potentially the largest user group, i.e., casual users. This project discusses the concepts and implementations of a natural query language system which satisfy the nature and information needs of casual users by allowing them to communicate with the system in the form of their native (natural) language. In addition, a framework for the development of such an interface is also introduced for the MADAM (Multics Approach to Data Access and Management) system at the University of Southwestern Louisiana.

  19. REopt: A Platform for Energy System Integration and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Katherine H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cutler, Dylan S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Olis, Daniel R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elgqvist, Emma M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Li, Xiangkun [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Laws, Nicholas D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); DiOrio, Nicholas A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Walker, H. A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-22

    REopt is a techno-economic decision support model used to optimize energy systems for buildings, campuses, communities, and microgrids. The primary application of the model is for optimizing the integration and operation of behind-the-meter energy assets. This report provides an overview of the model, including its capabilities and typical applications; inputs and outputs; economic calculations; technology descriptions; and model parameters, variables, and equations. The model is highly flexible, and is continually evolving to meet the needs of each analysis. Therefore, this report is not an exhaustive description of all capabilities, but rather a summary of the core components of the model.

  20. An emerging platform for drug delivery: aerogel based systems.

    Science.gov (United States)

    Ulker, Zeynep; Erkey, Can

    2014-03-10

    Over the past few decades, advances in "aerogel science" have provoked an increasing interest for these materials in pharmaceutical sciences for drug delivery applications. Because of their high surface areas, high porosities and open pore structures which can be tuned and controlled by manipulation of synthesis conditions, nanostructured aerogels represent a promising class of materials for delivery of various drugs as well as enzymes and proteins. Along with biocompatible inorganic aerogels and biodegradable organic aerogels, more complex systems such as surface functionalized aerogels, composite aerogels and layered aerogels have also been under development and possess huge potential. Emphasis is given to the details of the aerogel synthesis and drug loading methods as well as the influence of synthesis parameters and loading methods on the adsorption and release of the drugs. Owing to their ability to increase the bioavailability of low solubility drugs, to improve both their stability and their release kinetics, there are an increasing number of research articles concerning aerogels in different drug delivery applications. This review presents an up to date overview of the advances in all kinds of aerogel based drug delivery systems which are currently under investigation.

  1. RAMI analysis for DEMO HCPB blanket concept cooling system

    Energy Technology Data Exchange (ETDEWEB)

    Dongiovanni, Danilo N., E-mail: danilo.dongiovanni@enea.it [ENEA, Unità Tecnica Fusione, ENEA C. R. Frascati (Italy); Pinna, Tonio [ENEA, Unità Tecnica Fusione, ENEA C. R. Frascati (Italy); Carloni, Dario [KIT, Institute of Neutron Physics and Reactor Technology (INR) – KIT (Germany)

    2015-10-15

    Highlights: • RAMI (reliability, availability, maintainability and inspectability) preliminary assessment for HCPB blanket concept cooling system. • Reliability block diagram (RBD) modeling and analysis for HCPB primary heat transfer system (PHTS), coolant purification system (CPS), pressure control system (PCS), and secondary cooling system. • Sensitivity analysis on system availability performance. • Failure models and repair models estimated on the base of data from the ENEA fusion component failure rate database (FCFRDB). - Abstract: A preliminary RAMI (reliability, availability, maintainability and inspectability) assessment for the HCPB (helium cooled pebble bed) blanket cooling system based on currently available design for DEMO fusion power plant is presented. The following sub-systems were considered in the analysis: blanket modules, primary cooling loop including pipework and steam generators lines, pressure control system (PCS), coolant purification system (CPS) and secondary cooling system. For PCS and CPS systems an extrapolation from ITER Test Blanket Module corresponding systems was used as reference design in the analysis. Helium cooled pebble bed (HCPB) system reliability block diagrams (RBD) models were implemented taking into account: system reliability-wise configuration, operating schedule currently foreseen for DEMO, maintenance schedule and plant evolution schedule as well as failure and corrective maintenance models. A simulation of plant activity was then performed on implemented RBDs to estimate plant availability performance on a mission time of 30 calendar years. The resulting availability performance was finally compared to availability goals previously proposed for DEMO plant by a panel of experts. The study suggests that inherent availability goals proposed for DEMO PHTS system and Tokamak auxiliaries are potentially achievable for the primary loop of the HCPB concept cooling system, but not for the secondary loop. A

  2. Distributed situation awareness in complex collaborative systems: A field study of bridge operations on platform supply vessels.

    Science.gov (United States)

    Sandhåland, Hilde; Oltedal, Helle A; Hystad, Sigurd W; Eid, Jarle

    2015-06-01

    This study provides empirical data about shipboard practices in bridge operations on board a selection of platform supply vessels (PSVs). Using the theoretical concept of distributed situation awareness, the study examines how situation awareness (SA)-related information is distributed and coordinated at the bridge. This study thus favours a systems approach to studying SA, viewing it not as a phenomenon that solely happens in each individual's mind but rather as something that happens between individuals and the tools that they use in a collaborative system. Thus, this study adds to our understanding of SA as a distributed phenomenon. Data were collected in four field studies that lasted between 8 and 14 days on PSVs that operate on the Norwegian continental shelf and UK continental shelf. The study revealed pronounced variations in shipboard practices regarding how the bridge team attended to operational planning, communication procedures, and distracting/interrupting factors during operations. These findings shed new light on how SA might decrease in bridge teams during platform supply operations. The findings from this study emphasize the need to assess and establish shipboard practices that support the bridge teams' SA needs in day-to-day operations.

  3. The OCarePlatform: A context-aware system to support independent living.

    Science.gov (United States)

    De Backere, F; Bonte, P; Verstichel, S; Ongenae, F; De Turck, F

    2017-03-01

    Currently, healthcare services, such as institutional care facilities, are burdened with an increasing number of elderly people and individuals with chronic illnesses and a decreasing number of competent caregivers. To relieve the burden on healthcare services, independent living at home could be facilitated, by offering individuals and their (in)formal caregivers support in their daily care and needs. With the rise of pervasive healthcare, new information technology solutions can assist elderly people ("residents") and their caregivers to allow residents to live independently for as long as possible. To this end, the OCarePlatform system was designed. This semantic, data-driven and cloud-based back-end system facilitates independent living by offering information and knowledge-based services to the resident and his/her (in)formal caregivers. Data and context information are gathered to realize context-aware and personalized services and to support residents in meeting their daily needs. This body of data, originating from heterogeneous data and information sources, is sent to personalized services, where is fused, thus creating an overview of the resident's current situation. The architecture of the OCarePlatform is proposed, which is based on a service-oriented approach, together with its different components and their interactions. The implementation details are presented, together with a running example. A scalability and performance study of the OCarePlatform was performed. The results indicate that the OCarePlatform is able to support a realistic working environment and respond to a trigger in less than 5 seconds. The system is highly dependent on the allocated memory. The data-driven character of the OCarePlatform facilitates easy plug-in of new functionality, enabling the design of personalized, context-aware services. The OCarePlatform leads to better support for elderly people and individuals with chronic illnesses, who live independently. Copyright

  4. Technical assessment of maglev system concepts. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lever, J.H.

    1998-10-01

    The Government Maglev System Assessment Team operated from 1991 to 1993 as part of the National Maglev Initiative. They assessed the technical viability of four US Maglev system concepts, using the French TGV high speed train and the German TR07 Maglev system as assessment baselines. Maglev in general offers advantages that include high speed potential, excellent system control, high capacity, low energy consumption, low maintenance, modest land requirements, low operating costs, and ability to meet a variety of transportation missions. Further, the US Maglev concepts could provide superior performance to TR07 for similar cost or similar performance for less cost. They also could achieve both lower trip times and lower energy consumption along typical US routes. These advantages result generally from the use of large gap magnetic suspensions, more powerful linear synchronous motors and tilting vehicles. Innovative concepts for motors, guideways, suspension, and superconducting magnets all contribute to a potential for superior long term performance of US Maglev systems compared with TGV and TR07.

  5. Multivariate Gradient Analysis for Evaluating and Visualizing a Learning System Platform for Computer Programming

    Science.gov (United States)

    Mather, Richard

    2015-01-01

    This paper explores the application of canonical gradient analysis to evaluate and visualize student performance and acceptance of a learning system platform. The subject of evaluation is a first year BSc module for computer programming. This uses "Ceebot," an animated and immersive game-like development environment. Multivariate…

  6. Delivery of therapeutic radioisotopes using nanoparticle platforms: potential benefit in systemic radiation therapy

    OpenAIRE

    Zhang, Longjiang; CHEN, HONGWEI; Wang, Liya; Liu, Tian; Yeh, Julie; Lu, Guangming; Yang, Lily; Mao, Hui

    2010-01-01

    Radiation therapy is an effective cancer treatment option in conjunction with chemotherapy and surgery. Emerging individualized internal and systemic radiation treatment promises significant improvement in efficacy and reduction of normal tissue damage; however, it requires cancer cell targeting platforms for efficient delivery of radiation sources. With recent advances in nanoscience and nanotechnology, there is great interest in developing nanomaterials as multifunctional carriers to delive...

  7. On the High Altitude Platform (HAP W-CDMA System Capacity

    Directory of Open Access Journals (Sweden)

    L. de Haro-Ariet

    2004-06-01

    Full Text Available The performance of a downlink power control model, based on a n-thpower distance law, is evaluated for high altitude platform station(HAPS W-CDMA systems. The downlink capacity using this model iscompared with the uplink capacity. It is shown that the uplink capacityis higher than the downlink capacity.

  8. Exergetic assessment of energy systems on North Sea oil and gas platforms

    DEFF Research Database (Denmark)

    Nguyen, Tuong-Van; Pierobon, Leonardo; Elmegaard, Brian

    2013-01-01

    Oil and gas platforms in the North Sea region are associated with high power consumption and large CO2-emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall...... destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35 e38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high...

  9. Inertial stabilization system based on a Gough-Stewart parallel platform

    OpenAIRE

    Ramírez Gómez, Aitor

    2017-01-01

    The goal of this project is to develop a system able to control the balance of a par- allel platform robot. The project includes 1) the Gough-Stewart parallel robot, created and assembled at IRI 's lab; 2) 6 Dynamixel rotary actuators, to move the platform; 3) and Arduino® UNO electronic board, to control the rotary actuators and to process data provided by 4) an inertia measurement unit MPU-6050 sensor. In this project it is described how the communication between the device...

  10. ITER fast plant system controller prototype based on ATCA platform

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, B., E-mail: bruno@ipfn.ist.utl.pt [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, P-1049-001 Lisboa (Portugal); Sousa, J.; Carvalho, B.B.; Batista, A.; Neto, A.; Santos, B.; Duarte, A.; Valcarcel, D.; Alves, D.; Correia, M.; Rodrigues, A.P.; Carvalho, P.F. [Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, Universidade Tecnica de Lisboa, P-1049-001 Lisboa (Portugal); Ruiz, M. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (Spain); Vega, J.; Castro, R. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, CIEMAT, Av. Complutense, Madrid (Spain); Lopez, J.M. [Grupo de Investigacion en Instrumentacion y Acustica Aplicada, Universidad Politecnica de Madrid (Spain); Utzel, N.; Makijarvi, P. [ITER Organization, CS 90 046, 13067 St. Paul lez Durance Cedex (France)

    2012-12-15

    The ITER fast plan system controllers (FPSC) are based on embedded technologies. The FPSCs [1] will be devoted to data acquisition tasks (sampling rates >1 kSPS) and control purposes in closed-control loops whose cycle times are below 1 ms. Fast controllers will be dedicated industrial controllers with the ability to supervise other fast and/or slow controllers and interface to actuators, sensors and high performance networks. This contribution presents an FPSC prototype, specialized for data acquisition, based on the ATCA (Advanced Telecommunications Computing Architecture) standard. This prototyping activity contributes to the ITER Plant Control Design Handbook (PCDH) effort of standardization, specifically regarding fast controller characteristics. For the prototype, IPFN has developed a new family of ATCA modules targeting ITER requirements. This family of modules comprises an AMC (Advanced Mezzanine Card) carrier/data hub/timing hub, compliant with the upcoming ATCA extensions for Physics, and a multi-channel galvanically isolated PnP digitizer, designed for serviceability. The design and test of a peer-to-peer communications layer for the implementation of a reflective memory over PCI Express and the design and test of an IEEE-1588 transport layer over an high performance serial link were also performed. In this contribution, a complete description of the solution is presented as well as the integration of the controller into the standard CODAC environment. The most relevant test results will be addressed, focusing in the benefits and limitations of the applied technologies.

  11. Building automation system of payment platform weight component for large spacecraft reflector

    Science.gov (United States)

    Kovalev, I. V.; Badanina, J. O.

    2016-04-01

    Considered Design and the logic of opening large convertible antenna. The necessity of compensation weight component in the assembly and testing of the design. Given the logic of the movement elements of power spokes, concluded that the use of the tracking system to compensate for the weight component. The analysis of the existing equipment and control systems. Produced selection of the manufacturer of automated equipment that meets the stated objectives of management and control. It is concluded that the design component of the weight compensation system based on servo controllers and sensors combined platform automation, controlled by special software. The structure of the platform automation, consistent workflow testing. It defines the principles of interaction between subsystems of the weight compensation component for receiving, processing and monitoring of process parameters testing. It is concluded that the proposed system can be integrated into the automation system and the perspective of process control testing of disclosure of large spacecraft.

  12. Development of Distributed Simulation Platform for Power Systems and Wind Farms

    DEFF Research Database (Denmark)

    Hu, Rui; Hu, Weihao; Chen, Zhe

    2015-01-01

    The study of wind power system strongly relies on simulations in all kinds of methods. In industry, the feasibility and efficiency of wind power projects also will be verified by simulations at first. However, taking time cost and economy into consideration, simulations in large scales often....... Through the data interfaces, the platform can import practical data to simulate environment situations, faults and devices, which makes the simulation much more close to reality and forms a test-bed for wind farms and power systems as well. Thus, The platform can connect to certain Supervisory Control...... and Data Acquisition (SCADA) systems and Energy Management System (EMS), etc. to realize non-real-time semiphysical simulation for wind farm and power system control researches....

  13. Development of size-customized hepatocarcinoma spheroids as a potential drug testing platform using a sacrificial gelatin microsphere system.

    Science.gov (United States)

    Leong, Wenyan; Kremer, Antje; Wang, Dong-An

    2016-06-01

    Sacrificial gelatin microspheres can be developed as a cell delivery vehicle for non-anchorage dependent cells - its incorporation into a macroscopic scaffold system not only allows the cells to be cultured in suspension within cavities left behind by the sacrificial material, it also allows scaffold-free tissue development to be confined within the cavities. In this study, dense and highly viable hepatocarcinoma spheroids were developed by means of encapsulation in sacrificial gelatin microspheres produced via a simple water-in-oil emulsion technique. By initial selection of microsphere size and distribution, spheroid size can be controlled for various applications such as uniform tumor spheroids as a reproducible three-dimensional drug screening and testing platform that better mimics the in vivo nature of tumors (instead of conventional monolayer culture), as this study has suggested as a proof-of-concept with chemotherapy drug Doxorubicin. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. A Probabilistic Approach for the System-Level Design of Multi-ASIP Platforms

    DEFF Research Database (Denmark)

    Micconi, Laura

    C with a relatively short time-to-market. While there are several commercial tools for the design of a single ASIP, there is still a lack of automation in the design of multi-ASIP platforms. In this thesis we consider multi-ASIP platforms for real-time applications. Each ASIP is designed to run a specific group...... introduce a system-level Design Space Exploration (DSE) for the very early phases of the design that automatizes part of the multi-ASIP design flow. Our DSE is responsible for assigning the tasks to the different ASIPs exploring different platform alternatives. We perform a schedulability analysis for each...... solution to determine which one has the highest chances of meeting the deadlines of the applications and that should be considered in the next stages of the multi-ASIP design flow....

  15. TrustMAS: Trusted Communication Platform for Multi-Agent Systems

    CERN Document Server

    Szczypiorski, Krzysztof; Mazurczyk, Wojciech; Cabaj, Krzysztof; Radziszewski, Pawel

    2008-01-01

    The paper presents TrustMAS - Trusted Communication Platform for Multi-Agent Systems, which provides trust and anonymity for mobile agents. The platform includes anonymous technique based on random-walk algorithm for providing general purpose anonymous communication for agents. All agents, which take part in the proposed platform, benefit from trust and anonymity that is provided for their interactions. Moreover, in TrustMAS there are StegAgents (SA) that are able to perform various steganographic communication. To achieve that goal, SAs may use methods in different layers of TCP/IP model or specialized middleware enabling steganography that allows hidden communication through all layers of mentioned model. In TrustMAS steganographic channels are used to exchange routing tables between StegAgents. Thus all StegAgents in TrustMAS with their ability to exchange information by using hidden channels form distributed steganographic router (Stegrouter).

  16. W-NINE: A Two-Stage Emulation Platform for Mobile and Wireless Systems

    Directory of Open Access Journals (Sweden)

    Emmanuel Conchon

    2010-01-01

    Full Text Available More and more applications and protocols are now running on wireless networks. Testing the implementation of such applications and protocols is a real challenge as the position of the mobile terminals and environmental effects strongly affect the overall performance. Network emulation is often perceived as a good trade-off between experiments on operational wireless networks and discrete-event simulations on Opnet or ns-2. However, ensuring repeatability and realism in network emulation while taking into account mobility in a wireless environment is very difficult. This paper proposes a network emulation platform, called W-NINE, based on off-line computations preceding online pattern-based traffic shaping. The underlying concepts of repeatability, dynamicity, accuracy, and realism are defined in the emulation context. Two different simple case studies illustrate the validity of our approach with respect to these concepts.

  17. Microdevice Platform for In Vitro Nervous System and Its Disease Model

    Directory of Open Access Journals (Sweden)

    Jin-Ha Choi

    2017-09-01

    Full Text Available The development of precise microdevices can be applied to the reconstruction of in vitro human microenvironmental systems with biomimetic physiological conditions that have highly tunable spatial and temporal features. Organ-on-a-chip can emulate human physiological functions, particularly at the organ level, as well as its specific roles in the body. Due to the complexity of the structure of the central nervous system and its intercellular interaction, there remains an urgent need for the development of human brain or nervous system models. Thus, various microdevice models have been proposed to mimic actual human brain physiology, which can be categorized as nervous system-on-a-chip. Nervous system-on-a-chip platforms can prove to be promising technologies, through the application of their biomimetic features to the etiology of neurodegenerative diseases. This article reviews the microdevices for nervous system-on-a-chip platform incorporated with neurobiology and microtechnology, including microfluidic designs that are biomimetic to the entire nervous system. The emulation of both neurodegenerative disorders and neural stem cell behavior patterns in micro-platforms is also provided, which can be used as a basis to construct nervous system-on-a-chip.

  18. Thermal processing system concepts and considerations for RWMC buried waste

    Energy Technology Data Exchange (ETDEWEB)

    Eddy, T.L.; Kong, P.C.; Raivo, B.D.; Anderson, G.L.

    1992-02-01

    This report presents a preliminary determination of ex situ thermal processing system concepts and related processing considerations for application to remediation of transuranic (TRU)-contaminated buried wastes (TRUW) at the Radioactive Waste Management Complex (RWMC) of the Idaho National Engineering Laboratory (INEL). Beginning with top-level thermal treatment concepts and requirements identified in a previous Preliminary Systems Design Study (SDS), a more detailed consideration of the waste materials thermal processing problem is provided. Anticipated waste stream elements and problem characteristics are identified and considered. Final waste form performance criteria, requirements, and options are examined within the context of providing a high-integrity, low-leachability glass/ceramic, final waste form material. Thermal processing conditions required and capability of key systems components (equipment) to provide these material process conditions are considered. Information from closely related companion study reports on melter technology development needs assessment and INEL Iron-Enriched Basalt (IEB) research are considered. Five potentially practicable thermal process system design configuration concepts are defined and compared. A scenario for thermal processing of a mixed waste and soils stream with essentially no complex presorting and using a series process of incineration and high temperature melting is recommended. Recommendations for applied research and development necessary to further detail and demonstrate the final waste form, required thermal processes, and melter process equipment are provided.

  19. Concept of Operations for Real-time Airborne Management System

    Energy Technology Data Exchange (ETDEWEB)

    Barr, Jonathan L.; Taira, Randal Y.; Orr, Heather M.

    2013-03-04

    The purpose of this document is to describe the operating concepts, capabilities, and benefits of RAMS including descriptions of how the system implementations can improve emergency response, damage assessment, task prioritization, and situation awareness. This CONOPS provides general information on operational processes and procedures required to utilize RAMS, and expected performance benefits of the system. The primary audiences for this document are the end users of RAMS (including flight operators and incident commanders) and the RAMS management team. Other audiences include interested offices within the Department of Homeland Security (DHS), and officials from other state and local jurisdictions who want to implement similar systems.

  20. Systems engineering: A formal approach. Part 1: System concepts

    Science.gov (United States)

    Vanhee, K. M.

    1993-03-01

    Engineering is the scientific discipline focused on the creation of new artifacts that are supposed to be of some use to our society. Different types of artifacts require different engineering approaches. However, in all these disciplines the development of a new artifact is divided into stages. Three stages can always be recognized: Analysis, Design, and Realization. The book considers only the first two stages of the development process. It focuses on a specific type of artifacts, called discrete dynamic systems. These systems consist of active components of actors that consume and produce passive components or tokens. Three subtypes are studied in more detail: business systems (like a factory or restaurant), information systems (whether automated or not), and automated systems (systems that are controlled by an automated information system). The first subtype is studied by industrial engineers, the last by software engineers and electrical engineers, whereas the second is a battlefield for all three disciplines. The union of these disciplines is called systems engineering.

  1. A European mobile satellite system concept exploiting CDMA and OBP

    Science.gov (United States)

    Vernucci, A.; Craig, A. D.

    1993-01-01

    This paper describes a novel Land Mobile Satellite System (LMSS) concept applicable to networks allowing access to a large number of gateway stations ('Hubs'), utilizing low-cost Very Small Aperture Terminals (VSAT's). Efficient operation of the Forward-Link (FL) repeater can be achieved by adopting a synchronous Code Division Multiple Access (CDMA) technique, whereby inter-code interference (self-noise) is virtually eliminated by synchronizing orthogonal codes. However, with a transparent FL repeater, the requirements imposed by the highly decentralized ground segment can lead to significant efficiency losses. The adoption of a FL On-Board Processing (OBP) repeater is proposed as a means of largely recovering this efficiency impairment. The paper describes the network architecture, the system design and performance, the OBP functions and impact on implementation. The proposed concept, applicable to a future generation of the European LMSS, was developed in the context of a European Space Agency (ESA) study contract.

  2. An Open-Control Concept for a Holonic Multiagent System

    Science.gov (United States)

    Adam, Emmanuel; Berger, Thierry; Sallez, Yves; Trentesaux, Damien

    MAS are particularly adapted to deal with distributed and dynamic environment. The management of business workflow, or data flow, flexible manufacturing systems is typically a good application field for them. This kind of application requires centralization of the data control and flexibility to face with changes on the network. In the context of FMS, where products and resources entities can be seen as active, this paper presents the open-control concept and gives an example of its instantiation with holonic scheme. The open-control concept proposed in this paper exhibits the classic explicit control, as well as an innovative type of control called implicit control that allows system entities to be influenced via an Optimization Mechanism (OM). We illustrate our proposition by an implementation on a flexible assembly cell in our university.

  3. A concept of a space hazard counteraction system: Astronomical aspects

    Science.gov (United States)

    Shustov, B. M.; Rykhlova, L. V.; Kuleshov, Yu. P.; Dubov, Yu. N.; Elkin, K. S.; Veniaminov, S. S.; Borovin, G. K.; Molotov, I. E.; Naroenkov, S. A.; Barabanov, S. I.; Emel'yanenko, V. V.; Devyatkin, A. V.; Medvedev, Yu. D.; Shor, V. A.; Kholshevnikov, K. V.

    2013-07-01

    The basic science of astronomy and, primarily, its branch responsible for studying the Solar System, face the most important practical task posed by nature and the development of human civilization—to study space hazards and to seek methods of counteracting them. In pursuance of the joint Resolution of the Federal Space Agency (Roscosmos) and the RAS (Russian Academy of Sciences) Space Council of June 23, 2010, the RAS Institute of Astronomy in collaboration with other scientific and industrial organizations prepared a draft concept of the federal-level program targeted at creating a system of space hazard detection and counteraction. The main ideas and astronomical content of the concept are considered in this article.

  4. CONCEPTS OF GENERAL SYSTEMS THEORY APPLIED ON GOODS

    OpenAIRE

    Bogdan Onete

    2007-01-01

    The General Systems Theory is one of the most important points of view nowadays. Now, its concepts could be applied in a various number of sciences including Consumer Sciences. The complexity of the product, the different way in which it can be seen and also the exponentially diversifying assortment requires another approach to the product, through models. This approach must take into account certain particularities which do not appear in a regular modelling

  5. Integrated System Health Management: Foundational Concepts, Approach, and Implementation

    Science.gov (United States)

    Figueroa, Fernando

    2009-01-01

    A sound basis to guide the community in the conception and implementation of ISHM (Integrated System Health Management) capability in operational systems was provided. The concept of "ISHM Model of a System" and a related architecture defined as a unique Data, Information, and Knowledge (DIaK) architecture were described. The ISHM architecture is independent of the typical system architecture, which is based on grouping physical elements that are assembled to make up a subsystem, and subsystems combine to form systems, etc. It was emphasized that ISHM capability needs to be implemented first at a low functional capability level (FCL), or limited ability to detect anomalies, diagnose, determine consequences, etc. As algorithms and tools to augment or improve the FCL are identified, they should be incorporated into the system. This means that the architecture, DIaK management, and software, must be modular and standards-based, in order to enable systematic augmentation of FCL (no ad-hoc modifications). A set of technologies (and tools) needed to implement ISHM were described. One essential tool is a software environment to create the ISHM Model. The software environment encapsulates DIaK, and an infrastructure to focus DIaK on determining health (detect anomalies, determine causes, determine effects, and provide integrated awareness of the system to the operator). The environment includes gateways to communicate in accordance to standards, specially the IEEE 1451.1 Standard for Smart Sensors and Actuators.

  6. 2-port internal model control for gyro stabilized platform of electro-optical tracking system

    Science.gov (United States)

    Xia, Yun-xia; Bao, Qi-liang; Li, Zhi-jun; Wu, Qiong-yan

    2012-06-01

    Line-of-sight stabilized system, which can be used to isolate the vibration of the moving bed and the disturbance of environment, is the most important part of an electro-optical tracking system. The steady precision and robustness are the key issues of recent researches. In this paper, a novel control approach so called 2-Port Internal Model Control (2-PIMC) for line-of-sight stabilized system is proposed. By adding a parallel feedback control loop on the basis of Internal Model Control (IMC), the 2-PIMC method can improve precision while it also has strong robustness as the IMC. The robustness and the static error of 2-PIMC method were subsequently analyzed. Based on this novel method, Simulation and experiment are both carried out for a gyro stabilized platform of electro-optical tracking system. The experiments include a shaking table which can generate disturbance as the moving bed and a gyro stabilized platform which is mounted on the shaking table. The experimental result indicated that the gyro stabilized platform using 2-PIMC method is accurate and effective. Comparing with PI control, the following error and disturbance restraining error were both greatly improved at low-frequency and mid-frequency by the 2-PIMC method proposed. The improvement of precision is more than 10dB at 4Hz. In addition, the 2-PIMC method doesn't need any extra sensors for the platform and it's easy for parameters regulation. It can be concluded that the2-PIMC method is a new approach for the high-performance gyro stabilized platform and might have broad application prospect.

  7. Integration Platform As Central Service Of Data Replication In Distributed Medical System

    Directory of Open Access Journals (Sweden)

    Wiesław Wajs

    2007-01-01

    Full Text Available The paper presents the application of Java Integration Platform (JIP to data replicationin the distributed medical system. After an introductory part on the medical system’s architecture,the focus shifts to a comparison of different approaches that exist with regard totransferring data between the system’s components. A description is given of the historicaldata processing and of the whole area of the JIP application to the medical system.

  8. Analysis of Accuracy of a High-speed Mobile Platform Control System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The efficient manufacture technique involves a high-speed control of platform mobile system. A linear acutor is presented in this paper. The linear acutor is constructed as a linear stepper motor. However, to sustain both high accuracy and high speed for the position and speed control, A single-stack computer system is constructed and a special control algorithm is prescribed to controled the linear actuator continuously. In this paper, the nonlinear errors resulted from the magnetic saturation and the h...

  9. Formal Analysis of Security Models for Mobile Devices, Virtualization Platforms, and Domain Name Systems

    Directory of Open Access Journals (Sweden)

    Gustavo Betarte

    2015-12-01

    Full Text Available In this work we investigate the security of security-critical applications, i.e. applications in which a failure may produce consequences that are unacceptable. We consider three areas: mobile devices, virtualization platforms, and domain name systems. The Java Micro Edition platform defines the Mobile Information Device Profile (MIDP to facilitate the development of applications for mobile devices, like cell phones and PDAs. We first study and compare formally several variants of the security model specified by MIDP to access sensitive resources of a mobile device. Hypervisors allow multiple guest operating systems to run on shared hardware, and offer a compelling means of improving the security and the flexibility of software systems. In this work we present a formalization of an idealized model of a hypervisor. We establish (formally that the hypervisor ensures strong isolation properties between the different operating systems, and guarantees that requests from guest operating systems are eventually attended. We show also that virtualized platforms are transparent, i.e. a guest operating system cannot distinguish whether it executes alone or together with other guest operating systems on the platform. The Domain Name System Security Extensions (DNSSEC is a suite of specifications that provides origin authentication and integrity assurance services for DNS data. We finally introduce a minimalistic specification of a DNSSEC model which provides the grounds needed to formally state and verify security properties concerning the chain of trust of the DNSSEC tree. We develop all our formalizations in the Calculus of Inductive Constructions --formal language that combines a higher-order logic and a richly-typed functional programming language-- using the Coq proof assistant.

  10. Research on the concept change of the network education platform in colleges and universities%高校网络教育平台的理念转变研究

    Institute of Scientific and Technical Information of China (English)

    赵莉

    2016-01-01

    Network education has formed an independent education system in colleges and universities,for us to integrate the exist educational platform into a new network platform,change education concept,while optimizing the educational plat-form's structure and its profit,with a purpose to promoting college students'full scale development.This thesis in depth analyzes this issue,and discovers the college network education platform is based on three transformations:the transition from school education to network education,the transition from traditional teaching to network research oriented teaching, and single of training mode to network diversification of training mode,as well as in business to industry management.%高校网络教育已经形成一个独立的教育体系,通过将教育平台优化整合,形成网络化平台,转变教育理念,实现教育平台结构优化和效益的最大化,从而促进大学生全面发展。笔者就此深入分析,认为高校网络教育平台是建立在学校教育向网络教育的转变、传统教学向网络研究型教学的转变、单一培养模式向网络多样化培养模式转变以及从事业经营向产业经营转变的理念基础上。

  11. An intelligent monitoring and management system for cross-enterprise biomedical data sharing platform

    Science.gov (United States)

    Wang, Tusheng; Yang, Yuanyuan; Zhang, Jianguo

    2013-03-01

    In order to enable multiple disciplines of medical researchers, clinical physicians and biomedical engineers working together in a secured, efficient, and transparent cooperative environment, we had designed an e-Science platform for biomedical imaging research and application cross multiple academic institutions and hospitals in Shanghai by using grid-based or cloud-based distributed architecture and presented this work in SPIE Medical Imaging conference held in San Diego in 2012. However, when the platform integrates more and more nodes over different networks, the first challenge is that how to monitor and maintain all the hosts and services operating cross multiple academic institutions and hospitals in the e-Science platform, such as DICOM and Web based image communication services, messaging services and XDS ITI transaction services. In this presentation, we presented a system design and implementation of intelligent monitoring and management which can collect system resource status of every node in real time, alert when node or service failure occurs, and can finally improve the robustness, reliability and service continuity of this e-Science platform.

  12. DPOI:Distributed Software System Development Platform for Ocean Information Service

    Institute of Scientific and Technical Information of China (English)

    GUO Zhongwen; HU Keyong; JIANG Yongguo; SUN Zhaosui

    2015-01-01

    Ocean information management is of great importance as it has been employed in many areas of ocean science and technology. However, the developments of Ocean Information Systems (OISs) often suffer from low efficiency because of repetitive work and continuous modifications caused by dynamic requirements. In this paper, the basic requirements of OISs are analyzed first, and then a novel platform DPOI is proposed to improve development efficiency and enhance software quality of OISs by providing off-the-shelf resources. In the platform, the OIS is decomposed hierarchically into a set of modules, which can be reused in different system developments. These modules include the acquisition middleware and data loader that collect data from instruments and files respectively, the database that stores data consistently, the components that support fast application generation, the web services that make the data from distributed sources syntactical by use of predefined schemas and the configuration toolkit that enables software customization. With the assistance of the development platform, the software development needs no programming and the development procedure is thus accelerated greatly. We have applied the development platform in practical developments and evaluated its efficiency in several development practices and different development approaches. The results show that DPOI significantly improves development efficiency and software quality.

  13. Development of deployable structures for large space platforms. Volume 2: Design development

    Science.gov (United States)

    Greenberg, H. S.

    1983-01-01

    Design evolution, test article design, test article mass properties, and structural analysis of deployable platform systems are discussed. Orbit transfer vehicle (OTV) hangar development, OTV hangar concept selection, and manned module development are discussed. Deployable platform systems requirements, material data base, technology development needs, concept selection and deployable volume enclosures are also discussed.

  14. Comparing dynamical systems concepts and techniques for biomechanical analysis

    Institute of Scientific and Technical Information of China (English)

    Richard E.A. van Emmerik; Scott W. Ducharme; Avelino C. Amado; Joseph Hamill

    2016-01-01

    Traditional biomechanical analyses of human movement are generally derived from linear mathematics. While these methods can be useful in many situations, they do not describe behaviors in human systems that are predominately nonlinear. For this reason, nonlinear analysis methods based on a dynamical systems approach have become more prevalent in recent literature. These analysis techniques have provided new insights into how systems (1) maintain pattern stability, (2) transition into new states, and (3) are governed by short-and long-term (fractal) correlational processes at different spatio-temporal scales. These different aspects of system dynamics are typically investigated using concepts related to variability, stability, complexity, and adaptability. The purpose of this paper is to compare and contrast these different concepts and demonstrate that, although related, these terms represent fundamentally different aspects of system dynamics. In particular, we argue that variability should not uniformly be equated with stability or complexity of movement. In addition, current dynamic stability measures based on nonlinear analysis methods (such as the finite maximal Lyapunov exponent) can reveal local instabilities in movement dynamics, but the degree to which these local instabilities relate to global postural and gait stability and the ability to resist external perturbations remains to be explored. Finally, systematic studies are needed to relate observed reductions in complexity with aging and disease to the adaptive capabilities of the movement system and how complexity changes as a function of different task constraints.

  15. The C3PO project: a laser communication system concept for small satellites

    Science.gov (United States)

    d'Humières, Benoît; Esmiller, Bruno; Gouy, Yann; Steck, Emilie; Quintana, Crisanto; Faulkner, Graham; O'Brien, Dominic; Sproll, Fabian; Wagner, Paul; Hampf, Daniel; Riede, Wolfgang; Salter, Michael; Wang, Qin; Platt, Duncan; Jakonis, Darius; Piao, Xiaoyu; Karlsson, Mikael; Oberg, Olof; Petermann, Ingemar; Michalkiewicz, Aneta; Krezel, Jerzy; Debowska, Anna; Thueux, Yoann

    2017-02-01

    The satellite market is shifting towards smaller (micro and nanosatellites), lowered mass and increased performance platforms. Nanosatellites and picosatellites have been used for a number of new, innovative and unique payloads and missions. This trend requires new concepts for a reduced size, a better performance/weight ratio and a reduction of onboard power consumption. In this context, disruptive technologies, such as laser-optical communication systems, are opening new possibilities. This paper presents the C3PO1 system, "advanced Concept for laser uplink/ downlink CommuniCation with sPace Objects", and the first results of the development of its key technologies. This project targets the design of a communications system that uses a ground-based laser to illuminate a satellite, and a Modulating Retro-Reflector (MRR) to return a beam of light modulated by data to the ground. This enables a downlink, without a laser source on the satellite. This architecture suits well to small satellite applications so as high data rates are potentially provided with very low board mass. C3PO project aims to achieve data rates of 1Gbit/s between LEO satellites and Earth with a communication payload mass of less than 1kilogram. In this paper, results of the initial experiments and demonstration of the key technologies will be shown.

  16. Dump system concepts for the Future Circular Collider

    CERN Document Server

    Bartmann, Wolfgang; Barnes, Mike; Borburgh, Jan; Burkart, Florian; Goddard, Brennan; Kramer, Thomas; Lechner, Anton; Sanz Ull, Alejandro; Schmidt, Rudiger; Stoel, Linda; Ostojic, Ranko; Rodziewicz, Janusz Pawel; van Trappen, Pieter; Barna, Dani

    2017-01-01

    The Future Circular Collider (FCC-hh) beam dump system must provide a safe and reliable extraction and dilution of the stored beam onto a dump absorber. Energy deposition studies show that damage limits of presently used absorber materials will already be reached for single bunches at 50 TeV. A fast field rise of the extraction kicker is required in order to sufficiently separate swept single bunches on the extraction protection absorbers in case of an asynchronous beam dump. In line with this demand is the proposal of a highly segmented extraction kicker system which allows for accepting a single kicker switch erratic and thus, significantly reduces the probability of an asynchronous beam dump. Superconducting septa are foreseen to limit the overall system length and power consumption. Two extraction system concepts are presented and evaluated regarding overall system length, energy deposition on absorbers, hardware requirements, radiation issues, and layout flexibility.

  17. The systems approach in developmental psychology: fundamental concepts and principles

    Directory of Open Access Journals (Sweden)

    Carolina Tinajero

    Full Text Available Developmental Psychology seems to have come to an unifying theoretical framework which may make feasible to overcome the fragmentation so frequently referred to within the discipline. This is indicated by the widespread support being given to the systems approach, enriched by dialectic and contextual postulates. In this article, we briefly review the antecedents of this approach and explore its core concepts, indicating their roots and the precise way in which they are applied to developmental analyses today. We also examine the implications of the systems approach for developmental investigation, and its challenges.

  18. Data management software concept for WEST plasma measurement system

    Science.gov (United States)

    Zienkiewicz, P.; Kasprowicz, G.; Byszuk, A.; Wojeński, A.; Kolasinski, P.; Cieszewski, R.; Czarski, T.; Chernyshova, M.; Pozniak, K.; Zabolotny, W.; Juszczyk, B.; Mazon, D.; Malard, P.

    2014-11-01

    This paper describes the concept of data management software for the multichannel readout system for the GEM detector used in WEST Plasma experiment. The proposed system consists of three separate communication channels: fast data channel, diagnostics channel, slow data channel. Fast data channel is provided by the FPGA with integrated ARM cores providing direct readout data from Analog Front Ends through 10GbE with short, guaranteed intervals. Slow data channel is provided by multiple, fast CPUs after data processing with detailed readout data with use of GNU/Linux OS and appropriate software. Diagnostic channel provides detailed feedback for control purposes.

  19. Framework Programmable Platform for the Advanced Software Development Workstation: Preliminary system design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, John W., IV; Henderson, Richard; Futrell, Michael T.

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The focus here is on the design of components that make up the FPP. These components serve as supporting systems for the Integration Mechanism and the Framework Processor and provide the 'glue' that ties the FPP together. Also discussed are the components that allow the platform to operate in a distributed, heterogeneous environment and to manage the development and evolution of software system artifacts.

  20. Business Ecosystems as Institutions of Participation: A Systems Perspective on Community-Developed Platforms

    Directory of Open Access Journals (Sweden)

    Steven Muegge

    2011-11-01

    Full Text Available This article introduces a systems perspective on community-developed platforms and the institutions that structure participation by individuals and companies. It brings together the past research about technology platforms, company participation in business ecosystems, and individual participation in developer communities, and links these codependent subsystems through resource flows, interconnected institutional arrangements, and shared governance. To achieve this synthesis, it draws on conceptual arguments from a broad range of sources, including Elinor Ostrom's research program on the economics of sustainable commons governance, Tim O'Reilly's practitioner essays about the architecture of participation, and prior management research on modularity and design, resource dependence, and systems thinking. The resulting “systems of systems” perspective is parsimonious and insightful for entrepreneurs, managers, and community leaders.

  1. Dynamic performance of power generation systems for off-shore oil and gas platforms

    DEFF Research Database (Denmark)

    Pierobon, Leonardo; Breuhaus, Peter; Haglind, Fredrik

    2014-01-01

    On off-shore oil and gas platforms two or more gas turbines typically support the electrical demand on site by operating as a stand-alone (island) power system. As reliability and availability are major concerns during operation, the dynamic performance of the power generation system becomes...... a crucial aspect for stable operation and prevention of unwanted shut down in case of disturbances in the local grid. This paper aims at developing and validating a dynamic model of the gas turbine-based power generation system installed on the Draugen off-shore oil and gas platform (located in the North...... Sea, Norway). The dynamic model of the SGT-500 gas turbine includes dynamic equations for the combustion chamber and for the high pressure, low pressure and turbine shafts. The low and high pressure compressors are modeled by using quasi steady-state conditions by scaling the maps of axial compressors...

  2. System Engineering Concept Demonstration, System Engineering Needs. Volume 2

    Science.gov (United States)

    1992-12-01

    support, executable specification, quality assessment), management support, and communications (especially for organizationally or geographically ...34* Technical Management Plan (equivalent to SEMP) "* New Program Startup Guide "* System Specification "* Segement Specifications "* Design Analysis

  3. Advanced Turbine Systems Program industrial system concept development

    Energy Technology Data Exchange (ETDEWEB)

    Gates, S. [Solar Turbines Inc., San Diego, CA (United States)

    1995-10-01

    The objective of Phase II of the Advanced Turbine Systems Program is to develop conceptual designs of gas fired advanced turbine systems that can be adapted for operation on coal and biomass fuels. The technical, economic, and environmental performance operating on natural gas and in a coal fueled mode is to be assessed. Detailed designs and test work relating to critical components are to be completed and a market study is to be conducted.

  4. Real-time visual tracking system modelling in MPSoC using platform based design

    Science.gov (United States)

    Jia, Zai Jian; Bautista, Tomás; Núñez, Antonio; Guerra, Cayetano; Hernández, Mario

    2009-02-01

    In this paper, we present the modelling of a real-time tracking system on a Multi-Processor System on Chip (MPSoC). Our final goal is to build a more complex computer vision system (CVS) by integrating several applications in a modular way, which performs different kind of data processing issues but sharing a common platform, and this way, a solution for a set of applications using the same architecture is offered and not just for one application. In our current work, a visual tracking system with real-time behaviour (25 frames/sec) is used like a reference application, and also, guidelines for our future CVS applications development. Our algorithm written in C++ is based on correlation technique and the threshold dynamic update approach. After an initial computational complexity analysis, a task-graph was generated from this tracking algorithm. Concurrently with this functionality correctness analysis, a generic model of multi-processor platform was developed. Finally, the tracking system performance mapped onto the proposed architecture and shared resource usage were analyzed to determine the real architecture capacity, and also to find out possible bottlenecks in order to propose new solutions which allow more applications to be mapped on the platform template in the future.

  5. Examining System-Wide Impacts of Solar PV Control Systems with a Power Hardware-in-the-Loop Platform

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tess L.; Fuller, Jason C.; Schneider, Kevin P.; Palmintier, Bryan; Lundstrom, Blake; Chakraborty, Sudipta

    2014-06-08

    High penetration levels of distributed solar PV power generation can lead to adverse power quality impacts, such as excessive voltage rise, voltage flicker, and reactive power values that result in unacceptable voltage levels. Advanced inverter control schemes have been developed that have the potential to mitigate many power quality concerns. However, local closed-loop control may lead to unintended behavior in deployed systems as complex interactions can occur between numerous operating devices. To enable the study of the performance of advanced control schemes in a detailed distribution system environment, a test platform has been developed that integrates Power Hardware-in-the-Loop (PHIL) with concurrent time-series electric distribution system simulation. In the test platform, GridLAB-D, a distribution system simulation tool, runs a detailed simulation of a distribution feeder in real-time mode at the Pacific Northwest National Laboratory (PNNL) and supplies power system parameters at a point of common coupling. At the National Renewable Energy Laboratory (NREL), a hardware inverter interacts with grid and PV simulators emulating an operational distribution system. Power output from the inverters is measured and sent to PNNL to update the real-time distribution system simulation. The platform is described and initial test cases are presented. The platform is used to study the system-wide impacts and the interactions of inverter control modes—constant power factor and active Volt/VAr control—when integrated into a simulated IEEE 8500-node test feeder. We demonstrate that this platform is well-suited to the study of advanced inverter controls and their impacts on the power quality of a distribution feeder. Additionally, results are used to validate GridLAB-D simulations of advanced inverter controls.

  6. The historiographical conceptsystem of philosophy’

    DEFF Research Database (Denmark)

    Catana, Leo

    this concept as a criterion of inclusion of past philosophies, and as an ideal form of exposition. The present book describes the origin of this historiographical notion, its implicit Protestant assumptions, and it traces the concept’s impact upon the methods of history of philosophy and history of ideas......Jacob Brucker (1696-1770) established the history of philosophy as a philosophical discipline in the 1740s. In order to separate this new discipline from other historical disciplines, he introduced the historiographical conceptsystem of philosophy’. The historian of philosophy should use......, as developed over the following centuries. Finally, it discusses the concept’s strenghts and weaknesses as a historiographical tool, arguing that it ought to be given up. Anmeldelser: M. Sgarbi, in Historia philosophica, vol. 7 (2009), pp. 158-160; D. v. W., in Bruniana & Campanelliana, XV, 2009/2, pp. 554...

  7. Educationally Critical Aspects of the Concept of an Information System

    Directory of Open Access Journals (Sweden)

    Chris Cope

    2002-01-01

    Full Text Available An empirical study is reported which identified and compared a deep understanding of the concept of an information system (IS with the various levels of understanding of a group of undergraduate IS students. The aim was to identify the educationally critical aspects of the deep understanding. The study was significant in that the educationally critical aspects are not known, yet have significant implications for IS education and practice. Without addressing the critical aspects in teaching and learning about IS the development of an appropriate deep understanding by students is unlikely. The production of entry-level IS practitioners without a deep understanding of the concept of an IS is logically likely to have adverse implications for IS development projects.

  8. PanEurasian Experiment (PEEX): Modelling Platform for Earth System Observations and Forecasting

    Science.gov (United States)

    Baklanov, Alexander; Mahura, Alexander; Penenko, Vladimir; Zilitinkevich, Sergej; Kulmala, Markku

    2014-05-01

    As the part of the PEEX initiative, for the purpose of supporting the PEEX observational system and answering on the PEEX scientific questions, a hierarchy/ framework of modern multi-scale models for different elements of the Earth System integrated with the observation system is needed. One of the acute topics in the international debate on land-atmosphere interactions in relation to global change is the Earth System Modeling (ESM). The question is whether the ESM components actually represent how the Earth is functioning. The ESMs consist of equations describing the processes in the atmosphere, ocean, cryosphere, terrestrial and marine biosphere. ESMs are the best tools for analyzing the effect of different environmental changes on future climate or for studying the role of whole processes in the Earth System. These types of analysis and prediction of the future change are especially important in the Arctic latitudes, where climate change is proceeding fastest and where near-surface warming has been about twice the global average during the recent decades. The processes, and hence parameterization, in ESMs are still based on insufficient knowledge of physical, chemical and biological mechanisms involved in the climate system and the resolution of known processes is insufficient. Global scale modeling of land-atmosphere-ocean interactions using ESMs provides a way to explore the influence of spatial and temporal variation in the activities of land system and on climate. There is a lack, however, ways to forward a necessary process understanding effectively to ESMs and to link all this to the decision-making process. Arctic-boreal geographical domain plays significant role in terms of green-house gases and anthropogenic emissions and as an aerosol source area in the Earth System. The PEEX Modelling Platform (PEEX-MP) is characterized by: • An ensemble approach with the integration of modelling results from different models/ countries etc.; • A hierarchy of

  9. A multi-parameter data acquisition system for the collision research platform at Shanghai EBIT

    Institute of Scientific and Technical Information of China (English)

    WANG Xincheng; WEI Baoren; YANG Yang; SHEN Yang; XIAO Jun; ZHANG Xuemei; ZOU Yaming

    2009-01-01

    In this work we describe a multi-parameter data acquisition system (DAQ) which has been developed for the Shanghai EBIT.This system is operated at the collision research platform which includes a recoil-ion momentum spectrometer (RIMS).We have employed DAQ based on the VME system,which is a very fast developing system within the RIMS community,and with which we can reach data transfer rates of up to 160 Mb.s-1.The software developed for DAQ based on UnisDX-XP is also described.

  10. Research and design of wap service system based on MISC platform

    Institute of Scientific and Technical Information of China (English)

    YU Qun; SONG Mei-na; SONG Jun-de; ZHAN Xiao-su

    2006-01-01

    Wireless application protocol (WAP) have become the available method for subscribers to access mobile Internet through mobile terminal, regardless of the location and time. In this article, a logical architecture of WAP service system based on mobile information service centre (MISC) [1, 2] platform is discussed. The whole system is designed and developed on Java 2 enterprise edition [3] (J2EE) architecture and deployed on BEA WebLogic Server [3, 4]. Furthermore, a series of various WAP services based on this system have been implemented, which validates the practice value of this system.This optimal scheme presented in this article will reduce the development complexity, deployment risk, and so on.

  11. A Stability Criterion for Time-Delay Tension Leg Platform Systems Subjected to External Force

    Institute of Scientific and Technical Information of China (English)

    Chen-Yuan CHEN; Chien-wen SHEN; Cheng-Wu CHEN; Kevin Fong-Rey LIU; Ming-Jen CHENG

    2009-01-01

    Stability analysis plays a central role in nonlinear system theory and engineering application.Over the past few yeats,the stability analysis of fuzzy systems has been proposed and there are many successful applications in practical engineering.Therefore,in this paper firstly proposed is the stability analysis on oceanic structure by fuzzy models.In the present study,Takagi-Sugeno (T-S) fuzzy model is proposed for a time delay tension leg platform (TLP) system subjected to an external wave force.In terms of stability analysis,linear matrix inequality (LMI) conditions are derived via Lyapunov theory to guarantee the stability of the TLP system.

  12. Test and Experiment Study on Synchronous Cooperative Design System Over Networked Manufacturing Platform

    Institute of Scientific and Technical Information of China (English)

    LUO Yabo; ZHENG Li; ZOU Shiwei; ZHAO Liang

    2006-01-01

    Based on the analysis on the previous research in virtual manufacturing and virtual enterprises, this paper provides a novel architecture of networked manufacturing system around the cooperative design. The key technologies for synchronous cooperative design in networked manufacturing platform, such as the cooperative mechanism, cooperative rules, control authority conveyed, cooperative efficiency, are detailed, with which a synchronous cooperative design system is developed. Due to the cooperative efficiency is the major bottleneck of the synchronous cooperative design over Internet, this research details the test and experiment to demonstrate the practicality of the system. Finally the advantages of the system are illustrated compared with current software tools.

  13. Defining pharmaceutical systems strengthening: concepts to enable measurement.

    Science.gov (United States)

    Hafner, Tamara; Walkowiak, Helena; Lee, David; Aboagye-Nyame, Francis

    2017-05-01

    Pharmaceutical products are indispensable for improving health outcomes. An extensive body of work on access to and use of medicines has resulted in an assortment of tools measuring various elements of pharmaceutical systems. Until now however, there has been little attempt to conceptualize a pharmaceutical system as an entity and define its strengthening in a way that allows for measuring systems strengthening. The narrow focus of available tools limits their value in ascertaining which interventions result in stronger, more resilient systems. We sought to address this shortcoming by revisiting the current definitions, frameworks and assessment tools related to pharmaceutical systems. We conducted a comprehensive literature review and consulted with select pharmaceutical experts. On the basis of our review, we propose that a pharmaceutical system consists of all structures, people, resources, processes, and their interactions within the broader health system that aim to ensure equitable and timely access to safe, effective, quality pharmaceutical products and related services that promote their appropriate and cost-effective use to improve health outcomes. We further propose that pharmaceutical systems strengthening is the process of identifying and implementing strategies and actions that achieve coordinated and sustainable improvements in the critical components of a pharmaceutical system to make it more responsive and resilient and to enhance its performance for achieving better health outcomes. Finally, we established that, in addition to system performance and resilience, seven components of the pharmaceutical system are critical for measuring pharmaceutical systems strengthening: pharmaceutical products and related services; policy, laws and governance; regulatory systems; innovation, research and development, manufacturing, and trade; financing; human resources; and information. This work adds clarity to the concept of pharmaceutical systems and their

  14. Blood-Vessel-on-a-Chip Platforms for Evaluating Nanoparticle Drug Delivery Systems.

    Science.gov (United States)

    Li, Yuancheng; Zhu, Kai; Liu, Xiao; Zhang, Y Shrike

    2017-09-24

    Nanoparticle-based drug delivery systems hold great promise for the treatment of major diseases. However, their slow translation from bench to the clinic posts a serious concern. It is mainly attributed to the lack of suitable in vitro platforms for rapid and accurate screening of nanomedicine. Recent developments in microfluidic technologies have provided the possibility to reproduce the biomimetic blood vessel microenvironments outside the body, thus offering a convenient means to characterize the in vivo dynamics and biological responses of nanoparticles. In this review, we discuss the challenges facing the field of nanoparticle drug delivery and highlight the urgent need for construction of blood-vessel-on-a-chip platforms for testing nanomedicine. We subsequently illustrate advances in fabricating various well-controlled blood-vessel-on-a-chip platforms, covering a few examples that have used such models for evaluating nanoparticles behaviors. We then summarize with conclusions and perspectives. We anticipate that, further development of these blood-vessel-on-a-chip platforms with improved biomimetic parameters, tissue specificity, and personalization, will enable their wide applications in drug screening including nanomedicine. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  15. QUALITY ANALYSIS OF 3D SURFACE RECONSTRUCTION USING MULTI-PLATFORM PHOTOGRAMMETRIC SYSTEMS

    Directory of Open Access Journals (Sweden)

    Z. Lari

    2016-06-01

    Full Text Available In recent years, the necessity of accurate 3D surface reconstruction has been more pronounced for a wide range of mapping, modelling, and monitoring applications. The 3D data for satisfying the needs of these applications can be collected using different digital imaging systems. Among them, photogrammetric systems have recently received considerable attention due to significant improvements in digital imaging sensors, emergence of new mapping platforms, and development of innovative data processing techniques. To date, a variety of techniques haven been proposed for 3D surface reconstruction using imagery collected by multi-platform photogrammetric systems. However, these approaches suffer from the lack of a well-established quality control procedure which evaluates the quality of reconstructed 3D surfaces independent of the utilized reconstruction technique. Hence, this paper aims to introduce a new quality assessment platform for the evaluation of the 3D surface reconstruction using photogrammetric data. This quality control procedure is performed while considering the quality of input data, processing procedures, and photo-realistic 3D surface modelling. The feasibility of the proposed quality control procedure is finally verified by quality assessment of the 3D surface reconstruction using images from different photogrammetric systems.

  16. An Integrated System for Disabled People Developed with the Agent Platform PANGEA

    Directory of Open Access Journals (Sweden)

    Carolina ZATO

    2013-11-01

    Full Text Available New trends in multi-agent systems call for self-adaptation and high dynamics, hence the new model of open MAS or virtual organization of agents. However, as existing agent platforms are not yet equipped to support this behavior, it is necessary to create new systems and mechanisms to facilitate the development of these new architectures. This article presents PANGEA, an agent platform to develop open multi-agent systems, specifically those including organizational aspects such as virtual agent organizations. The platform allows the integral management of organizations and offers tools to the end user. Additionally, it includes a communication protocol based on the IRC standard, which facilitates implementation and remains robust even with a large number of connections. The introduction of a CommunicationAgent and a Sniffer make it possible to offer Web Services for the distributed control of interaction. In order to test PANGEA, an integral system was developed to help the disabled, gathering a set of easily deployable and integrated services under a single architecture.

  17. Scalable, high-performance 3D imaging software platform: system architecture and application to virtual colonoscopy.

    Science.gov (United States)

    Yoshida, Hiroyuki; Wu, Yin; Cai, Wenli; Brett, Bevin

    2012-01-01

    One of the key challenges in three-dimensional (3D) medical imaging is to enable the fast turn-around time, which is often required for interactive or real-time response. This inevitably requires not only high computational power but also high memory bandwidth due to the massive amount of data that need to be processed. In this work, we have developed a software platform that is designed to support high-performance 3D medical image processing for a wide range of applications using increasingly available and affordable commodity computing systems: multi-core, clusters, and cloud computing systems. To achieve scalable, high-performance computing, our platform (1) employs size-adaptive, distributable block volumes as a core data structure for efficient parallelization of a wide range of 3D image processing algorithms; (2) supports task scheduling for efficient load distribution and balancing; and (3) consists of a layered parallel software libraries that allow a wide range of medical applications to share the same functionalities. We evaluated the performance of our platform by applying it to an electronic cleansing system in virtual colonoscopy, with initial experimental results showing a 10 times performance improvement on an 8-core workstation over the original sequential implementation of the system.

  18. SMART PLATFORM FOR SUPPORT ISSUES AT THE FIRST AND LAST MILE IN THE SUPPLY CHAIN - THE CONCEPT OF THE S-MILE PROJECT

    Directory of Open Access Journals (Sweden)

    Marcin STANIEK

    2016-09-01

    Full Text Available The concept of an innovative support tool for freight transport used in planning, organization and realization is presented in this paper. In addition to the basic functions of a fleet management tool, the educative approach towards environmentally friendly behaviour will be based on promoting ecological solutions, such as unconventionally powered cars, e.g., electric vehicles (EVs. The suggested criteria for a routing algorithm, which will be implemented in the freight transport planner tool, not only allows routing in relation to time and cost criteria, but also the criterion regarding the limitation of emissions of harmful factors. The implementation of innovative the S-mile platform gives rise to environmentally friendly cognition behaviour in the freight transport sector. This is a fundamental aspect to its application, which could help to move the planning, organization and realization of freight transport in the direction of more environmental friendly solutions

  19. Real time fabric defect detection system on an embedded DSP platform

    Science.gov (United States)

    Raheja, Jagdish Lal; Ajay, Bandla; Chaudhary, Ankit

    2013-11-01

    In industrial fabric productions, automated real time systems are needed to find out the minor defects. It will save the cost by not transporting defected products and also would help in making compmay image of quality fabrics by sending out only undefected products. A real time fabric defect detection system (FDDS), implementd on an embedded DSP platform is presented here. Textural features of fabric image are extracted based on gray level co-occurrence matrix (GLCM). A sliding window technique is used for defect detection where window moves over the whole image computing a textural energy from the GLCM of the fabric image. The energy values are compared to a reference and the deviations beyond a threshold are reported as defects and also visually represented by a window. The implementation is carried out on a TI TMS320DM642 platform and programmed using code composer studio software. The real time output of this implementation was shown on a monitor.

  20. The iCub humanoid robot: an open-systems platform for research in cognitive development.

    Science.gov (United States)

    Metta, Giorgio; Natale, Lorenzo; Nori, Francesco; Sandini, Giulio; Vernon, David; Fadiga, Luciano; von Hofsten, Claes; Rosander, Kerstin; Lopes, Manuel; Santos-Victor, José; Bernardino, Alexandre; Montesano, Luis

    2010-01-01

    We describe a humanoid robot platform--the iCub--which was designed to support collaborative research in cognitive development through autonomous exploration and social interaction. The motivation for this effort is the conviction that significantly greater impact can be leveraged by adopting an open systems policy for software and hardware development. This creates the need for a robust humanoid robot that offers rich perceptuo-motor capabilities with many degrees of freedom, a cognitive capacity for learning and development, a software architecture that encourages reuse & easy integration, and a support infrastructure that fosters collaboration and sharing of resources. The iCub satisfies all of these needs in the guise of an open-system platform which is freely available and which has attracted a growing community of users and developers. To date, twenty iCubs each comprising approximately 5000 mechanical and electrical parts have been delivered to several research labs in Europe and to one in the USA.

  1. ADAPTIVE SYSTEMS THEORY: SOME BASIC CONCEPTS, METHODS AND RESULTS

    Institute of Scientific and Technical Information of China (English)

    GUO Lei

    2003-01-01

    The adaptive systems theory to be presented in this paper consists of two closely related parts: adaptive estimation (or filtering, prediction) and adaptive control of dynamical systems. Both adaptive estimation and control are nonlinear mappings of the on-line observed signals of dynamical systems, where the main features are the uncertainties in both the system's structure and external disturbances, and the non-stationarity and dependency of the system signals. Thus, a key difficulty in establishing a mathematical theory of adaptive systems lies in how to deal with complicated nonlinear stochastic dynamical systems which describe the adaptation processes. In this paper, we will illustrate some of the basic concepts, methods and results through some simple examples. The following fundamental questions will be discussed: How much information is needed for estimation? How to deal with uncertainty by adaptation? How to analyze an adaptive system? What are the convergence or tracking performances of adaptation? How to find the proper rate of adaptation in some sense? We will also explore the following more fundamental questions: How much uncertainty can be dealt with by adaptation ? What are the limitations of adaptation ? How does the performance of adaptation depend on the prior information ? We will partially answer these questions by finding some "critical values" and establishing some "Impossibility Theorems" for the capability of adaptation, for several basic classes of nonlinear dynamical control systems with either parametric or nonparametric uncertainties.

  2. A system dynamics approach to understanding the One Health concept.

    Science.gov (United States)

    Xie, Tai; Liu, Wenbao; Anderson, Benjamin D; Liu, Xiaorong; Gray, Gregory C

    2017-01-01

    There have been many terms used to describe the One Health concept, including movement, strategy, framework, agenda, approach, among others. However, the inter-relationships of the disciplines engaged in the One Health concept have not been well described. To identify and better elucidate the internal feedback mechanisms of One Health, we employed a system dynamics approach. First, a systematic literature review was conducted via searches in PubMed, Web of Knowledge, and ProQuest with the search terms: 'One Health' and (concept* or approach*). In addition, we used the HistCite® tool to add significant articles on One Health to the library. Then, of the 2368 articles identified, 19 were selected for evaluating the inter-relationships of disciplines engaged in One Health. Herein, we report a visually rich, theoretical model regarding interactions of various disciplines and complex problem descriptors engaged in One Health problem solving. This report provides a conceptual framework for future descriptions of the interdisciplinary engagements involved in One Health.

  3. EXPERIENCE OF USING BLACKBOARD E-LEARNING SYSTEM PLATFORM IN BACHELORS TRAINING

    Directory of Open Access Journals (Sweden)

    Alexey I. Nazarov

    2014-01-01

    Full Text Available The approaches to organization and tracking of educative process by means of distant learning technologies are considered. The article provides description and approbation results of network educational module «Mechanics and Molecular Physics», carried out on Blackboard e-learning system. The article describes the overall results of teaching process. The authors present the platform advantages in organizing and tracking of students self-directed learning. 

  4. Towards Autonomous Inspection of Space Systems Using Mobile Robotic Sensor Platforms

    Science.gov (United States)

    Wong, Edmond; Saad, Ashraf; Litt, Jonathan S.

    2007-01-01

    The space transportation systems required to support NASA's Exploration Initiative will demand a high degree of reliability to ensure mission success. This reliability can be realized through autonomous fault/damage detection and repair capabilities. It is crucial that such capabilities are incorporated into these systems since it will be impractical to rely upon Extra-Vehicular Activity (EVA), visual inspection or tele-operation due to the costly, labor-intensive and time-consuming nature of these methods. One approach to achieving this capability is through the use of an autonomous inspection system comprised of miniature mobile sensor platforms that will cooperatively perform high confidence inspection of space vehicles and habitats. This paper will discuss the efforts to develop a small scale demonstration test-bed to investigate the feasibility of using autonomous mobile sensor platforms to perform inspection operations. Progress will be discussed in technology areas including: the hardware implementation and demonstration of robotic sensor platforms, the implementation of a hardware test-bed facility, and the investigation of collaborative control algorithms.

  5. A modeling and simulation of control system of satellite tracking platform an- tenna

    Institute of Scientific and Technical Information of China (English)

    LIU Xiaojun; GONG Lihong

    2012-01-01

    Based on the platform of mobile carrier satellite tracking has a wide range of applications. The paper adopts the advanced method of to step response identify, using the data obtained by the experiment model of high-speed acquisition, using the method of the least squares, finally the antenna control system model function was identified. Make use of integral separation algorithm, simu- link simulation and experiment analysis to set the control parameters of it. Stimulate the signal antenna control system under inter- fering. The experiment of the simulation experiment showed that the antenna control system model is stable with little error.

  6. 3D Viewer Platform of Cloud Clustering Management System: Google Map 3D

    Science.gov (United States)

    Choi, Sung-Ja; Lee, Gang-Soo

    The new management system of framework for cloud envrionemnt is needed by the platfrom of convergence according to computing environments of changes. A ISV and small business model is hard to adapt management system of platform which is offered from super business. This article suggest the clustering management system of cloud computing envirionments for ISV and a man of enterprise in small business model. It applies the 3D viewer adapt from map3D & earth of google. It is called 3DV_CCMS as expand the CCMS[1].

  7. Design and Synchronization of Master-Slave Electronic Horizontal Platform System

    Directory of Open Access Journals (Sweden)

    Hang-Hong Kuo

    2012-01-01

    Full Text Available Horizontal platform system (HPS is one of the mechanical systems with rich behavior and has extensively been applied in offshore and earthquake engineering. A corresponding electronic HPS is proposed in this paper to reduce the research cost and time when studying dynamics of the mechanical HPS. Furthermore, an output feedback controller is proposed for global synchronization between coupled electronic HPS systems and its stability condition is also derived by employing the Lyapunov stability theory. The experimental simulations verify the dynamics of the proposed electronic HPS and the synchronization effectiveness of the proposed control scheme.

  8. Medical System Concept of Operations for Mars Exploration Missions

    Science.gov (United States)

    Urbina, Michelle; Rubin, D.; Hailey, M.; Reyes, D.; Antonsen, Eric

    2017-01-01

    Future exploration missions will be the first time humanity travels beyond Low Earth Orbit (LEO) since the Apollo program, taking us to cis-lunar space, interplanetary space, and Mars. These long-duration missions will cover vast distances, severely constraining opportunities for emergency evacuation to Earth and cargo resupply opportunities. Communication delays and blackouts between the crew and Mission Control will eliminate reliable, real-time telemedicine consultations. As a result, compared to current LEO operations onboard the International Space Station, exploration mission medical care requires an integrated medical system that provides additional in-situ capabilities and a significant increase in crew autonomy. The Medical System Concept of Operations for Mars Exploration Missions illustrates how a future NASA Mars program could ensure appropriate medical care for the crew of this highly autonomous mission. This Concept of Operations document, when complete, will document all mission phases through a series of mission use case scenarios that illustrate required medical capabilities, enabling the NASA Human Research Program (HRP) Exploration Medical Capability (ExMC) Element to plan, design, and prototype an integrated medical system to support human exploration to Mars.

  9. Access Safety Systems – New Concepts from the LHC Experience

    CERN Document Server

    Ladzinski, T; di Luca, S; Hakulinen, T; Hammouti, L; Riesco, T; Nunes, R; Ninin, P; Juget, J-F; Havart, F; Valentini, F; Sanchez-Corral Mena, E

    2011-01-01

    The LHC Access Safety System has introduced a number of new concepts into the domain of personnel protection at CERN. These can be grouped into several categories: organisational, architectural and concerning the end-user experience. By anchoring the project on the solid foundations of the IEC 61508/61511 methodology, the CERN team and its contractors managed to design, develop, test and commission on time a SIL3 safety system. The system uses a successful combination of the latest Siemens redundant safety programmable logic controllers with a traditional relay logic hardwired loop. The external envelope barriers used in the LHC include personnel and material access devices, which are interlocked door-booths introducing increased automation of individual access control, thus removing the strain from the operators. These devices ensure the inviolability of the controlled zones by users not holding the required credentials. To this end they are equipped with personnel presence detectors and th...

  10. A Web-Based Earth-Systems Knowledge Portal and Collaboration Platform

    Science.gov (United States)

    D'Agnese, F. A.; Turner, A. K.

    2010-12-01

    In support of complex water-resource sustainability projects in the Great Basin region of the United States, Earth Knowledge, Inc. has developed several web-based data management and analysis platforms that have been used by its scientists, clients, and public to facilitate information exchanges, collaborations, and decision making. These platforms support accurate water-resource decision-making by combining second-generation internet (Web 2.0) technologies with traditional 2D GIS and web-based 2D and 3D mapping systems such as Google Maps, and Google Earth. Most data management and analysis systems use traditional software systems to address the data needs and usage behavior of the scientific community. In contrast, these platforms employ more accessible open-source and “off-the-shelf” consumer-oriented, hosted web-services. They exploit familiar software tools using industry standard protocols, formats, and APIs to discover, process, fuse, and visualize earth, engineering, and social science datasets. Thus, they respond to the information needs and web-interface expectations of both subject-matter experts and the public. Because the platforms continue to gather and store all the contributions of their broad-spectrum of users, each new assessment leverages the data, information, and expertise derived from previous investigations. In the last year, Earth Knowledge completed a conceptual system design and feasibility study for a platform, which has a Knowledge Portal providing access to users wishing to retrieve information or knowledge developed by the science enterprise and a Collaboration Environment Module, a framework that links the user-access functions to a Technical Core supporting technical and scientific analyses including Data Management, Analysis and Modeling, and Decision Management, and to essential system administrative functions within an Administrative Module. The over-riding technical challenge is the design and development of a single

  11. Advanced Turbine Systems Program industrial system concept development

    Energy Technology Data Exchange (ETDEWEB)

    Gates, S.

    1995-12-31

    Solar approached Phase II of ATS program with the goal of 50% thermal efficiency. An intercolled and recuperated gas turbine was identified as the ultimate system to meet this goal in a commercial gas turbine environment. With commercial input from detailed market studies and DOE`s ATS program, Solar redefined the company`s proposed ATS to fit both market and sponsor (DOE) requirements. Resulting optimized recuperated gas turbine will be developed in two sizes, 5 and 15 MWe. It will show a thermal efficiency of about 43%, a 23% improvement over current industrial gas turbines. Other ATS goals--emissions, RAMD (reliability, availability, maintainability, durability), cost of power--will be met or exceeded. During FY95, advanced development of key materials, combustion and component technologies proceeded to the point of acceptance for inclusion in ATS Phase III.

  12. The FlexControl concept - a vision, a concept and a product for the future power system

    DEFF Research Database (Denmark)

    Nørgård, Per Bromand

    2011-01-01

    FlexControl is a vision, a concept and a product – a vision for the control of future power systems based on renewable energy and distributed control, a generic concept for smart control of many power units and ‘product’ implementations of the concept in different applications. The general...... development trends for power system towards more stochastic power generation from wind and solar, more distributed generation and control, and the introduction of demand responses from a huge number of small, flexible loads, require new architecture, design and means of controlling of the power system...... in order to maintain the power balances and the high security of supply and power quality in all parts of the grid. FlexControl is a flexible, modular, scalable and generic control concept designed for smart control of a huge number of distributed, controllable power units (DERs) in the power system. Flex...

  13. System design in an evolving system-of-systems architecture and concept of operations

    Science.gov (United States)

    Rovekamp, Roger N., Jr.

    Proposals for space exploration architectures have increased in complexity and scope. Constituent systems (e.g., rovers, habitats, in-situ resource utilization facilities, transfer vehicles, etc) must meet the needs of these architectures by performing in multiple operational environments and across multiple phases of the architecture's evolution. This thesis proposes an approach for using system-of-systems engineering principles in conjunction with system design methods (e.g., Multi-objective optimization, genetic algorithms, etc) to create system design options that perform effectively at both the system and system-of-systems levels, across multiple concepts of operations, and over multiple architectural phases. The framework is presented by way of an application problem that investigates the design of power systems within a power sharing architecture for use in a human Lunar Surface Exploration Campaign. A computer model has been developed that uses candidate power grid distribution solutions for a notional lunar base. The agent-based model utilizes virtual control agents to manage the interactions of various exploration and infrastructure agents. The philosophy behind the model is based both on lunar power supply strategies proposed in literature, as well as on the author's own approaches for power distribution strategies of future lunar bases. In addition to proposing a framework for system design, further implications of system-of-systems engineering principles are briefly explored, specifically as they relate to producing more robust cross-cultural system-of-systems architecture solutions.

  14. Using an FPGA-Based Processing Platform in an Industrial Machine Vision System

    OpenAIRE

    King, William E

    1998-01-01

    This thesis describes the development of a commercial machine vision system as a case study for utilizing the Modular Reprogrammable Real-time Processing Hardware (MORRPH) board. The commercial system described in this thesis is based on a prototype system that was developed as a test-bed for developing the necessary concepts and algorithms. The prototype system utilized color linescan cameras, custom framegrabbers, and standard PCs to color-sort red oak parts (staves). When a furniture ma...

  15. Bacterial artificial chromosomes (BACs)-on-Beads™ as a diagnostic platform for the rapid aneuploidy screening of products of conception.

    Science.gov (United States)

    Sheath, Karen L; Duffy, Lisa; Asquith, Philip; Love, Donald R; George, Alice M

    2013-08-01

    The aim of the present study was to evaluate the use of KaryoLite™ bacterial artificial chromosomes (BACs)‑on‑Beads™ (BoBs) technology for the rapid screening of products of conception (POC). Validation and prospective studies were carried out on 85 and 95 patient samples, respectively. Validation studies had previously been analyzed using routine culture and G-banded karyotyping. BoBs resulted in an abnormality detection frequency of 27%, with a failure rate of <3%. The time required for processing was significantly lower compared with that of tissue culture. In conclusion, BoBs technology decreased the failure rate, while increasing the analytical sensitivity compared with G-banded karyotype analysis alone. Additionally, significant cost savings may be achieved with regard to the time of processing and analysis of specimens.

  16. Electric Bike Sharing--System Requirements and Operational Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Cherry, Christopher; Worley, Stacy; Jordan, David

    2010-08-01

    Bike sharing is an exciting new model of public-private transportation provision that has quickly emerged in the past five years. Technological advances have overcome hurdles of early systems and cities throughout the globe are adopting this model of transportation service. Electric bikes have simultaneously gained popularity in many regions of the world and some have suggested that shared electric bikes could provide an even higher level of service compared to existing systems. There are several challenges that are unique to shared electric bikes: electric-assisted range, recharging protocol, and bike and battery checkout procedures. This paper outlines system requirements to successfully develop and deploy an electric bike sharing system, focusing on system architecture, operational concepts, and battery management. Although there is little empirical evidence, electric bike sharing could be feasible, depending on demand and battery management, and can potentially improve the utility of existing bike sharing systems. Under most documented bike sharing use scenarios, electric bike battery capacity is insufficient for a full day of operation, depending on recharging protocol. Off-board battery management is a promising solution to address this problem. Off-board battery management can also support solar recharging. Future pilot tests will be important and allow empirical evaluation of electric bikesharing system performance. (auth)

  17. Development of deployable structures for large space platform systems. Volume 1: Executive summary

    Science.gov (United States)

    Greenberg, H. S.

    1983-01-01

    The preponderance of study effort was devoted toward the deployable platform systems study which culminated in the detailed design of a ground test article for future development testing. This design is representative of a prototype square-truss, single-fold building-block design that can construct deployable platform structures. This prototype design was selected through a comprehensive and traceable selection process applied to eight competitive designs. The selection process compared the competitive designs according to seven major selection criteria, i.e., design versatility, cost, thermal stability, meteoroid impact significance, reliability, performance predictability, and orbiter integration suitability. In support of the foregoing, a materials data base, and platform systems technology development needs were established. An erectable design of an OTV hangar was selected and recommended for further design development. This design was selected from five study-developed competitive single-fold and double-fold designs including hard-shell and inflatable designs. Also, two deployable manned module configurations, i.e., a hard-shell and an inflatable design were each developed to the same requirements as the composite of two Space station baseline habitat modules.

  18. Platform-level Distributed Warfare Model-based on Multi-Agent System Framework

    Directory of Open Access Journals (Sweden)

    Xiong Li

    2012-05-01

    Full Text Available The multi-agent paradigm has become a useful tool in solving military problems. However, one of key challenges in multi-agent model for distributed warfare could be how to describe the microcosmic  tactical warfare platforms actions. In this paper, a platform-level distributed warfare model based on multi-agent system framework is designed to tackle this challenge. The basic ideas include:  Establishing multi-agent model by mapping from tactical warfare system’s members, i.e., warfare platforms, to respective agents; performing task decomposition and task allocation by using task-tree decomposition method and improved contract net protocol model technique; and implementing simulation by presenting battlefield terrain environment analysis algorithm based on grid approach. The  simulation demonstration results show that our model provides a feasible and effective approach to supporting the abstraction and representation of microcosmic tactical actions for complex warfare system.Defence Science Journal, 2012, 62(1, pp.180-186, DOI:http://dx.doi.org/10.14429/dsj.62.964

  19. A highly innovative global broadband mobile communication system concept

    Science.gov (United States)

    Wittig, Manfred

    2010-04-01

    Global mobile communication systems deployed in the 1990s (Iridium and Globalstar) failed to achieve the expected market success. However, recently a second generation of these two LEO constellations have been or will be procured. This shows evidence that global mobile satellite communications are attractive for a certain class of users. Basic requirements for mobile satellite communication networks are global coverage at high elevation angles, continuous availability and most important attractive service offers. For the first two reasons LEO constellations were designed and deployed. The large number of required satellites (remember the original Teledesic concept was designed containing 860 satellites) increases the CAPEX and consequently the service cost. This is probably the major reason for the limited commercial success of Iridium and Globalstar. An ideal global mobile (broadband) communication system shall provide global coverage at high elevation angles (not below e.g. 30°) with the lowest number of satellites. This seems to be contradictory. However, a solution will be presented that achieves global coverage which requires only five satellites and achieves high elevation angles even at polar locations. This orbit constellation is to be complemented with innovative payloads to achieve cost efficient broadband mobile services all over the Globe. Innovative L/S-band payload concepts will be introduced as well as Ka-band payloads.

  20. Examining System-Wide Impacts of Solar PV Control Systems with a Power Hardware-in-the-Loop Platform

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Tess L.; Fuller, Jason C.; Schneider, Kevin P.; Palmintier, Bryan; Lundstrom, Blake; Chakraborty, Sudipta

    2014-10-11

    High penetration levels of distributed solar PV power generation can lead to adverse power quality impacts such as excessive voltage rise, voltage flicker, and reactive power values that result in unacceptable voltage levels. Advanced inverter control schemes have been proposed that have the potential to mitigate many power quality concerns. However, closed-loop control may lead to unintended behavior in deployed systems as complex interactions can occur between numerous operating devices. In order to enable the study of the performance of advanced control schemes in a detailed distribution system environment, a Hardware-in-the-Loop (HIL) platform has been developed. In the HIL system, GridLAB-D, a distribution system simulation tool, runs in real-time mode at the Pacific Northwest National Laboratory (PNNL) and supplies power system parameters at a point of common coupling to hardware located at the National Renewable Energy Laboratory (NREL). Hardware inverters interact with grid and PV simulators emulating an operational distribution system and power output from the inverters is measured and sent to PNNL to update the real-time distribution system simulation. The platform is described and initial test cases are presented. The platform is used to study the system-wide impacts and the interactions of controls applied to inverters that are integrated into a simulation of the IEEE 8500-node test feeder, with inverters in either constant power factor control or active volt/VAR control. We demonstrate that this HIL platform is well-suited to the study of advanced inverter controls and their impacts on the power quality of a distribution feeder. Additionally, the results from HIL are used to validate GridLAB-D simulations of advanced inverter controls.

  1. A broadband proton backlighting platform to probe shock propagation in low-density systems

    Science.gov (United States)

    Sio, H.; Hua, R.; Ping, Y.; McGuffey, C.; Beg, F.; Heeter, R.; Li, C. K.; Petrasso, R. D.; Collins, G. W.

    2017-01-01

    A proton backlighting platform has been developed for the study of strong shock propagation in low-density systems in planar geometry. Electric fields at the converging shock front in inertial confinement fusion implosions have been previously observed, demonstrating the presence of—and the need to understand—strong electric fields not modeled in standard radiation-hydrodynamic simulations. In this planar configuration, long-pulse ultraviolet lasers are used to drive a strong shock into a gas-cell target, while a short-pulse proton backlighter side-on radiographs the shock propagation. The capabilities of the platform are presented here. Future experiments will vary shock strength and gas fill, to probe shock conditions at different Z and Te.

  2. Laboratory Information Management Systems--part I. Concepts.

    Science.gov (United States)

    McDowall, R D; Pearce, J C; Murkitt, G S

    1988-01-01

    The purpose of this analytical survey is to give a summary of some of the main design features that can be incorporated into a Laboratory Information Management System (LIMS), in the context of the total automation of the laboratory. Additionally it will give potential purchasers of such systems some essential background knowledge and a summary of our experiences. The survey is presented in two parts: the first covers the features and the possible concepts that could be used in a LIMS system. This is followed in the second part by an outline of the stages of acquisition, validation and benefits of such a system. Together the two articles provide the information required to aid the design and installation of a LIMS. This first section deals with the possible features that a laboratory could include when contemplating the installation of such a system: the basic tools that are required for a LIMS, the database and the computer equipment are discussed. This is followed by the interfacing of analytical instruments and central versus distributed processor philosophy. The various screen formats available and the use of bar codes as a means of identifying samples and for rapid data entry into the computer system are discussed.

  3. Health Recommender Systems: Concepts, Requirements, Technical Basics and Challenges

    Directory of Open Access Journals (Sweden)

    Martin Wiesner

    2014-03-01

    Full Text Available During the last decades huge amounts of data have been collected in clinical databases representing patients’ health states (e.g., as laboratory results, treatment plans, medical reports. Hence, digital information available for patient-oriented decision making has increased drastically but is often scattered across different sites. As as solution, personal health record systems (PHRS are meant to centralize an individual’s health data and to allow access for the owner as well as for authorized health professionals. Yet, expert-oriented language, complex interrelations of medical facts and information overload in general pose major obstacles for patients to understand their own record and to draw adequate conclusions. In this context, recommender systems may supply patients with additional laymen-friendly information helping to better comprehend their health status as represented by their record. However, such systems must be adapted to cope with the specific requirements in the health domain in order to deliver highly relevant information for patients. They are referred to as health recommender systems (HRS. In this article we give an introduction to health recommender systems and explain why they are a useful enhancement to PHR solutions. Basic concepts and scenarios are discussed and a first implementation is presented. In addition, we outline an evaluation approach for such a system, which is supported by medical experts. The construction of a test collection for case-related recommendations is described. Finally, challenges and open issues are discussed.

  4. Health recommender systems: concepts, requirements, technical basics and challenges.

    Science.gov (United States)

    Wiesner, Martin; Pfeifer, Daniel

    2014-03-03

    During the last decades huge amounts of data have been collected in clinical databases representing patients' health states (e.g., as laboratory results, treatment plans, medical reports). Hence, digital information available for patient-oriented decision making has increased drastically but is often scattered across different sites. As as solution, personal health record systems (PHRS) are meant to centralize an individual's health data and to allow access for the owner as well as for authorized health professionals. Yet, expert-oriented language, complex interrelations of medical facts and information overload in general pose major obstacles for patients to understand their own record and to draw adequate conclusions. In this context, recommender systems may supply patients with additional laymen-friendly information helping to better comprehend their health status as represented by their record. However, such systems must be adapted to cope with the specific requirements in the health domain in order to deliver highly relevant information for patients. They are referred to as health recommender systems (HRS). In this article we give an introduction to health recommender systems and explain why they are a useful enhancement to PHR solutions. Basic concepts and scenarios are discussed and a first implementation is presented. In addition, we outline an evaluation approach for such a system, which is supported by medical experts. The construction of a test collection for case-related recommendations is described. Finally, challenges and open issues are discussed.

  5. Design and Implementation of Harmful Algal Bloom Diagnosis System Based on J2EE Platform

    Science.gov (United States)

    Guo, Chunfeng; Zheng, Haiyong; Ji, Guangrong; Lv, Liang

    According to the shortcomings which are time consuming and laborious of the traditional HAB (Harmful Algal Bloom) diagnosis by the experienced experts using microscope, all kinds of methods and technologies to identify HAB emerged such as microscopic images, molecular biology, characteristics of pigments analysis, fluorescence spectra, inherent optical properties, etc. This paper proposes the design and implementation of a web-based diagnosis system integrating the popular methods for HAB identification. This system is designed with J2EE platform based on MVC (Model-View-Controller) model as well as technologies such as JSP, Servlets, EJB and JDBC.

  6. On Technology Convergence and Platforms: Requirements Challenges from New Technologies and System Architectures

    Science.gov (United States)

    Jarke, Matthias

    In this chapter, we investigate some opportunities and challenges for requirements engineering resulting from major changes in the technical context in which ICT systems operate, in particular from the continuous trend towards information and communication technology convergence. We illustrate these challenges with two major examples, one concerning requirements monitoring as a self-governance mechanism in Internet-based social networks, the other concerning the role of requirements modeling as a mediator between different cultures in embedded systems engineering for the automotive industry. Starting from a brief re-iteration of Thomas Friedman’s argument on standards evolution, we finally discuss platform strategies as an important emerging challenge for organizational RE.

  7. Nucleic Acid-based Detection of Bacterial Pathogens Using Integrated Microfluidic Platform Systems

    Directory of Open Access Journals (Sweden)

    Carl A. Batt

    2009-05-01

    Full Text Available The advent of nucleic acid-based pathogen detection methods offers increased sensitivity and specificity over traditional microbiological techniques, driving the development of portable, integrated biosensors. The miniaturization and automation of integrated detection systems presents a significant advantage for rapid, portable field-based testing. In this review, we highlight current developments and directions in nucleic acid-based micro total analysis systems for the detection of bacterial pathogens. Recent progress in the miniaturization of microfluidic processing steps for cell capture, DNA extraction and purification, polymerase chain reaction, and product detection are detailed. Discussions include strategies and challenges for implementation of an integrated portable platform.

  8. GeneLab: NASA's Open Access, Collaborative Platform for Systems Biology and Space Medicine

    Science.gov (United States)

    Berrios, Daniel C.; Thompson, Terri G.; Fogle, Homer W.; Rask, Jon C.; Coughlan, Joseph C.

    2015-01-01

    NASA is investing in GeneLab1 (http:genelab.nasa.gov), a multi-year effort to maximize utilization of the limited resources to conduct biological and medical research in space, principally aboard the International Space Station (ISS). High-throughput genomic, transcriptomic, proteomic or other omics analyses from experiments conducted on the ISS will be stored in the GeneLab Data Systems (GLDS), an open-science information system that will also include a biocomputation platform with collaborative science capabilities, to enable the discovery and validation of molecular networks.

  9. Sliding mode control of photoelectric tracking platform based on the inverse system method

    Directory of Open Access Journals (Sweden)

    Yao Zong Chen

    2016-01-01

    Full Text Available In order to improve the photoelectric tracking platform tracking performance, an integral sliding mode control strategy based on inverse system decoupling method is proposed. The electromechanical dynamic model is established based on multi-body system theory and Newton-Euler method. The coupled multi-input multi-output (MIMO nonlinear system is transformed into two pseudo-linear single-input single-output (SISO subsystems based on the inverse system method. An integral sliding mode control scheme is designed for the decoupled pseudo-linear system. In order to eliminate system chattering phenomenon caused by traditional sign function in sliding-mode controller, the sign function is replaced by the Sigmoid function. Simulation results show that the proposed decoupling method and the control strategy can restrain the influences of internal coupling and disturbance effectively, and has better robustness and higher tracking accuracy.

  10. Correlation Research of Medical Security Management System Network Platform in Medical Practice

    Science.gov (United States)

    Jie, Wang; Fan, Zhang; Jian, Hao; Li-nong, Yu; Jun, Fei; Ping, Hao; Ya-wei, Shen; Yue-jin, Chang

    Objective-The related research of medical security management system network in medical practice. Methods-Establishing network platform of medical safety management system, medical security network host station, medical security management system(C/S), medical security management system of departments and sections, comprehensive query, medical security disposal and examination system. Results-In medical safety management, medical security management system can reflect the hospital medical security problem, and can achieve real-time detection and improve the medical security incident detection rate. Conclusion-The application of the research in the hospital management implementation, can find hospital medical security hidden danger and the problems of medical disputes, and can help in resolving medical disputes in time and achieve good work efficiency, which is worth applying in the hospital practice.

  11. Omnidirectional holonomic platforms

    Energy Technology Data Exchange (ETDEWEB)

    Pin, F.G.; Killough, S.M.

    1994-06-01

    This paper presents the concepts for a new family of wheeled platforms which feature full omnidirectionality with simultaneous and independently controlled rotational and translational motion capabilities. The authors first present the orthogonal-wheels concept and the two major wheel assemblies on which these platforms are based. They then describe how a combination of these assemblies with appropriate control can be used to generate an omnidirectional capability for mobile robot platforms. The design and control of two prototype platforms are then presented and their respective characteristics with respect to rotational and translational motion control are discussed.

  12. BrahmVE Platform for Design and Test of Large Scale Multi-Agent Human-Centric Mission Concepts Project

    Data.gov (United States)

    National Aeronautics and Space Administration — All research and development in the nation's space program is being aligned around the new Exploration Systems Enterprise vision. The proposed work product for this...

  13. TRIO Platform: A novel low profile in vivo imaging support and restraint system for mice

    Directory of Open Access Journals (Sweden)

    Vladislav eVoziyanov

    2016-04-01

    Full Text Available High resolution, in vivo optical imaging of the mouse brain over time often requires anesthesia, which necessitates maintaining the animal's body temperature and level of anesthesia, as well as securing the head in an optimal, stable position. Controlling each parameter usually requires using multiple systems. Assembling multiple components into the small space on a standard microscope stage can be difficult and some commercially available parts simply do not fit. Furthermore, it is time-consuming to position an animal in the identical position over multiple imaging sessions for longitudinal studies. This is especially true when using an implanted gradient index (GRIN lens for deep brain imaging. The multiphoton laser beam must be parallel with the shaft of the lens because even a slight tilt of the lens can degrade image quality. In response to these challenges, we have designed a compact, integrated in vivo imaging support system to overcome the problems created by using separate systems during optical imaging in mice. It is a single platform that provides (1 sturdy head fixation, (2 an integrated gas anesthesia mask, and (3 safe warm water heating. This THREE-IN-ONE (TRIO Platform has a small footprint and a low profile that positions a mouse’s head only 20 mm above the microscope stage. This height is about one half to one third the height of most commercially available immobilization devices. We have successfully employed this system, using isoflurane in over 40 imaging sessions with an average of 2 h per session with no leaks or other malfunctions. Due to its smaller size, the TRIO Platform can be used with a wider range of upright microscopes and stages. Most of the components were designed in SOLIDWORKS® and fabricated using a 3D printer. This additive manufacturing approach also readily permits size modifications for creating systems for other small animals.

  14. Clarity™ digital PCR system: a novel platform for absolute quantification of nucleic acids.

    Science.gov (United States)

    Low, Huiyu; Chan, Shun-Jie; Soo, Guo-Hao; Ling, Belinda; Tan, Eng-Lee

    2017-03-01

    In recent years, digital polymerase chain reaction (dPCR) has gained recognition in biomedical research as it provides a platform for precise and accurate quantification of nucleic acids without the need for a standard curve. However, this technology has not yet been widely adopted as compared to real-time quantitative PCR due to its more cumbersome workflow arising from the need to sub-divide a PCR sample into a large number of smaller partitions prior to thermal cycling to achieve zero or at least one copy of the target RNA/DNA per partition. A recently launched platform, the Clarity™ system from JN Medsys, simplifies dPCR workflow through the use of a novel chip-in-a-tube technology for sample partitioning. In this study, the performance of Clarity™ was evaluated through quantification of the single-copy human RNase P gene. The system demonstrated high precision and accuracy and also excellent linearity across a range of over 4 orders of magnitude for the absolute quantification of the target gene. Moreover, consistent DNA copy measurements were also attained using a panel of different probe- and dye-based master mixes, demonstrating the system's compatibility with commercial master mixes. The Clarity™ was then compared to the QX100™ droplet dPCR system from Bio-Rad using a set of DNA reference materials, and the copy number concentrations derived from both systems were found to be closely associated. Collectively, the results showed that Clarity™ is a reliable, robust and flexible platform for next-generation genetic analysis.

  15. TRIO Platform: A Novel Low Profile In vivo Imaging Support and Restraint System for Mice.

    Science.gov (United States)

    Voziyanov, Vladislav; Kemp, Benjamin S; Dressel, Chelsea A; Ponder, Kayla; Murray, Teresa A

    2016-01-01

    High resolution, in vivo optical imaging of the mouse brain over time often requires anesthesia, which necessitates maintaining the animal's body temperature and level of anesthesia, as well as securing the head in an optimal, stable position. Controlling each parameter usually requires using multiple systems. Assembling multiple components into the small space on a standard microscope stage can be difficult and some commercially available parts simply do not fit. Furthermore, it is time-consuming to position an animal in the identical position over multiple imaging sessions for longitudinal studies. This is especially true when using an implanted gradient index (GRIN) lens for deep brain imaging. The multiphoton laser beam must be parallel with the shaft of the lens because even a slight tilt of the lens can degrade image quality. In response to these challenges, we have designed a compact, integrated in vivo imaging support system to overcome the problems created by using separate systems during optical imaging in mice. It is a single platform that provides (1) sturdy head fixation, (2) an integrated gas anesthesia mask, and (3) safe warm water heating. This THREE-IN-ONE (TRIO) Platform has a small footprint and a low profile that positions a mouse's head only 20 mm above the microscope stage. This height is about one half to one third the height of most commercially available immobilization devices. We have successfully employed this system, using isoflurane in over 40 imaging sessions with an average of 2 h per session with no leaks or other malfunctions. Due to its smaller size, the TRIO Platform can be used with a wider range of upright microscopes and stages. Most of the components were designed in SOLIDWORKS® and fabricated using a 3D printer. This additive manufacturing approach also readily permits size modifications for creating systems for other small animals.

  16. Concept of an Accelerator-Driven Advanced Nuclear Energy System

    Directory of Open Access Journals (Sweden)

    Xuesong Yan

    2017-07-01

    Full Text Available The utilization of clean energy is a matter of primary importance for sustainable development as well as a vital approach for solving worldwide energy-related issues. If the low utilization rate of nuclear fuel, nuclear proliferation, and insufficient nuclear safety can be solved, nuclear fission energy could be used as a sustainable and low-carbon clean energy form for thousands of years, providing steady and base-load electrical resources. To address these challenges, we propose an accelerator-driven advanced nuclear energy system (ADANES, consisting of a burner system and a fuel recycle system. In ADANES, the ideal utilization rate of nuclear fuel will be >95%, and the final disposal of nuclear waste will be minimized. The design of a high-temperature ceramic reactor makes the burner system safer. Part of fission products (FPs are removed during the simple reprocessing in the fuel recycle system, significantly reducing the risks of nuclear proliferation of nuclear technology and materials. The ADANES concept integrates nuclear waste transmutation, nuclear fuel breeding, and safety power production, with an ideal closed loop operation of nuclear fission energy, constituting a major innovation of great potential interest for future energy applications.

  17. Satellite power system concept development and evaluation program system definition technical assessment report

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The results of the system definition studies conducted by NASA as a part of the Department of Energy/National Aeronautics and Space Administration SPS Concept Development and Evaluation Program are summarized. The purpose of the system definition efforts was to identify and define candidate SPS concepts and to evaluate the concepts in terms of technical and cost factors. Although the system definition efforts consisted primarily of evaluation and assessment of alternative technical approaches, a reference system was also defined to facilitate economic, environmental, and societal assessments by the Department of Energy. This reference system was designed to deliver 5 GW of electrical power to the utility grid. Topics covered include system definition; energy conversion and power management; power transmission and reception; structures, controls, and materials; construction and operations; and space transportation.

  18. The Nature of Living Systems: An Exposition of the Basic Concepts in General Systems Theory.

    Science.gov (United States)

    Miller, James G.

    General systems theory is a set of related definitions, assumptions, and propositions which deal with reality as an integrated hierarchy of organizations of matter and energy. In this paper, the author defines the concepts of space, time, matter, energy, and information in terms of their meaning in general systems theory. He defines a system as a…

  19. BeamOptics : a Symbolic Platform for Modeling and the Solution of Beam Optics System

    Energy Technology Data Exchange (ETDEWEB)

    Yu-Chiu Chao

    2000-11-01

    BeamOptics [1] is a Mathematica-based computing platform devoted to the following objectives: (1) Structured representation and manipulation of particle beam optics systems with symbolic capabilities, (2) Analytical and numerical modeling of beam optics system behaviors, (3) Solution to specific beam optical or general accelerator system problems, in algebraic form in certain cases, through customized algorithms. Taking advantage of and conforming to the highly formal and self-contained structure of Mathematica, BeamOptics provides a unique platform for developing accelerator design and analysis programs. The feature of symbolic computation and the ability to manipulate the beam optics system at the programming language level enable the user to solve or optimize his system with considerably more efficiency, rigour and insight than can be easily achieved with passive modeling or numerical simulation methods. BeamOptics is developed with continuous evolution in mind. New features and algorithms from diverse sources can be incorporated without major modification, due to its formal and generic structure. In this report, a survey is given of the basic structure and methodology of BeamOptics, as well as a demonstration of some of its more specialized applications, and possible direction of evolution.

  20. Advanced transportation system study: Manned launch vehicle concepts for two way transportation system payloads to LEO

    Science.gov (United States)

    Duffy, James B.

    1993-12-01

    The purpose of the Advanced Transportation System Study (ATSS) task area 1 study effort is to examine manned launch vehicle booster concepts and two-way cargo transfer and return vehicle concepts to determine which of the many proposed concepts best meets NASA's needs for two-way transportation to low earth orbit. The study identified specific configurations of the normally unmanned, expendable launch vehicles (such as the National Launch System family) necessary to fly manned payloads. These launch vehicle configurations were then analyzed to determine the integrated booster/spacecraft performance, operations, reliability, and cost characteristics for the payload delivery and return mission. Design impacts to the expendable launch vehicles which would be required to perform the manned payload delivery mission were also identified. These impacts included the implications of applying NASA's man-rating requirements, as well as any mission or payload unique impacts. The booster concepts evaluated included the National Launch System (NLS) family of expendable vehicles and several variations of the NLS reference configurations to deliver larger manned payload concepts (such as the crew logistics vehicle (CLV) proposed by NASA JSC). Advanced, clean sheet concepts such as an F-1A engine derived liquid rocket booster (LRB), the single stage to orbit rocket, and a NASP-derived aerospace plane were also included in the study effort. Existing expendable launch vehicles such as the Titan 4, Ariane 5, Energia, and Proton were also examined. Although several manned payload concepts were considered in the analyses, the reference manned payload was the NASA Langley Research Center's HL-20 version of the personnel launch system (PLS). A scaled up version of the PLS for combined crew/cargo delivery capability, the HL-42 configuration, was also included in the analyses of cargo transfer and return vehicle (CTRV) booster concepts. In addition to strictly manned payloads, two-way cargo

  1. Satellite power system. Concept development and evaluation program

    Energy Technology Data Exchange (ETDEWEB)

    1978-10-01

    The Reference System description emphasizes technical and operational information required in support of environmental, socioeconomic, and comparative assessment studies. Supporting information has been developed according to a guideline of implementing two 5 GW SPS systems per year for 30 years beginning with an initial operational data of 2000 and with SPS's being added at the rate of two per year (10 GW/year) until 2030. The Reference System concept, which features gallium--aluminum--arsenide (GaAlAs) and silicon solar cell options, is described in detail. The concept utilizes a planar solar array (about 55 km/sup 2/) built on a graphite fiber reinforced thermoplastic structure. The silicon array uses a concentration ratio of one (no concentration), whereas the GaAlAs array uses a concentration ratio of two. A one-kilometer diameter phased array microwave antenna is mounted on one end. The antenna uses klystrons as power amplifiers with slotted waveguides as radiating elements. The satellite is constructed in geosynchronous orbit in a six-month period. The ground receiving stations (rectenna) are completed during the same time period. The other two major components of an SPS program are (1) the construction bases in space and launch and mission control bases on earth and (2) fleets of various transportation vehicles that support the construction and maintenance operations of the satellites. These transportation vehicles include Heavy Lift Launch Vehicles (HLLV), Personnel Launch Vehicles (PLV), Cargo Orbit Transfer Vehicles (COTV), and Personnel Orbit Transfer Vehicles (POTV). The earth launch site chosen is the Kennedy Space Center, pending further study.

  2. Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

    1992-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

  3. Multi-disease data management system platform for vector-borne diseases.

    Directory of Open Access Journals (Sweden)

    Lars Eisen

    Full Text Available BACKGROUND: Emerging information technologies present new opportunities to reduce the burden of malaria, dengue and other infectious diseases. For example, use of a data management system software package can help disease control programs to better manage and analyze their data, and thus enhances their ability to carry out continuous surveillance, monitor interventions and evaluate control program performance. METHODS AND FINDINGS: We describe a novel multi-disease data management system platform (hereinafter referred to as the system with current capacity for dengue and malaria that supports data entry, storage and query. It also allows for production of maps and both standardized and customized reports. The system is comprised exclusively of software components that can be distributed without the user incurring licensing costs. It was designed to maximize the ability of the user to adapt the system to local conditions without involvement of software developers. Key points of system adaptability include 1 customizable functionality content by disease, 2 configurable roles and permissions, 3 customizable user interfaces and display labels and 4 configurable information trees including a geographical entity tree and a term tree. The system includes significant portions of functionality that is entirely or in large part re-used across diseases, which provides an economy of scope as new diseases downstream are added to the system at decreased cost. CONCLUSIONS: We have developed a system with great potential for aiding disease control programs in their task to reduce the burden of dengue and malaria, including the implementation of integrated vector management programs. Next steps include evaluations of operational implementations of the current system with capacity for dengue and malaria, and the inclusion in the system platform of other important vector-borne diseases.

  4. Microfluidic tectonics platform: A colorimetric, disposable botulinum toxin enzyme-linked immunosorbent assay system.

    Science.gov (United States)

    Moorthy, Jaisree; Mensing, Glennys A; Kim, Dongshin; Mohanty, Swomitra; Eddington, David T; Tepp, William H; Johnson, Eric A; Beebe, David J

    2004-06-01

    A fabrication platform for realizing integrated microfluidic devices is discussed. The platform allows for creating specific microsystems for multistep assays in an ad hoc manner as the components that perform the assay steps can be created at any location inside the device via in situ fabrication. The platform was utilized to create a prototype microsystem for detecting botulinum neurotoxin directly from whole blood. Process steps such as sample preparation by filtration, mixing and incubation with reagents was carried out on the device. Various microfluidic components such as channel network, valves and porous filter were fabricated from prepolymer mixture consisting of monomer, cross-linker and a photoinitiator. For detection of the toxoid, biotinylated antibodies were immobilized on streptavidin-functionalized agarose gel beads. The gel beads were introduced into the device and were used as readouts. Enzymatic reaction between alkaline phosphatase (on secondary antibody) and substrate produced an insoluble, colored precipitate that coated the beads thus making the readout visible to the naked eye. Clinically relevant amounts of the toxin can be detected from whole blood using the portable enzyme-linked immunosorbent assay (ELISA) system. Multiple layers can be realized for effective space utilization and creating a three-dimensional (3-D) chaotic mixer. In addition, external materials such as membranes can be incorporated into the device as components. Individual components that were necessary to perform these steps were characterized, and their mutual compatibility is also discussed.

  5. Data Acquisition, Analysis and Transmission Platform for a Pay-As-You-Drive System

    Directory of Open Access Journals (Sweden)

    Luciano Boquete

    2010-06-01

    Full Text Available This paper presents a platform used to acquire, analyse and transmit data from a vehicle to a Control Centre as part of a Pay-As-You-Drive system. The aim is to monitor vehicle usage (how much, when, where and how and, based on this information, assess the associated risk and set an appropriate insurance premium. To determine vehicle usage, the system analyses the driver's respect for speed limits, driving style (aggressive or non-aggressive, mobile telephone use and the number of vehicle passengers. An electronic system on board the vehicle acquires these data, processes them and transmits them by mobile telephone (GPRS/UMTS to a Control Centre, at which the insurance company assesses the risk associated with vehicles monitored by the system. The system provides insurance companies and their customers with an enhanced service and could potentially increase responsible driving habits and reduce the number of road accidents.

  6. Data acquisition, analysis and transmission platform for a Pay-As-You-Drive system.

    Science.gov (United States)

    Boquete, Luciano; Rodríguez-Ascariz, José Manuel; Barea, Rafael; Cantos, Joaquín; Miguel-Jiménez, Juan Manuel; Ortega, Sergio

    2010-01-01

    This paper presents a platform used to acquire, analyse and transmit data from a vehicle to a Control Centre as part of a Pay-As-You-Drive system. The aim is to monitor vehicle usage (how much, when, where and how) and, based on this information, assess the associated risk and set an appropriate insurance premium. To determine vehicle usage, the system analyses the driver's respect for speed limits, driving style (aggressive or non-aggressive), mobile telephone use and the number of vehicle passengers. An electronic system on board the vehicle acquires these data, processes them and transmits them by mobile telephone (GPRS/UMTS) to a Control Centre, at which the insurance company assesses the risk associated with vehicles monitored by the system. The system provides insurance companies and their customers with an enhanced service and could potentially increase responsible driving habits and reduce the number of road accidents.

  7. The Effect of Mutual Coupling on a High Altitude Platform Diversity System Using Compact Antenna Arrays

    Directory of Open Access Journals (Sweden)

    Tommy Hult

    2010-01-01

    Full Text Available We analyze the destructive effects of mutual coupling and spatial correlation between the separate antenna elements on a combined diversity system consisting of multiple HAPs (High-Altitude Platforms employing various compact MIMO (Multiple-Input Multiple-Output antenna array configurations, in order to enhance the mutual information in HAP communication links. In addition, we assess the influence of the separation angle between HAPs on system performance, and determine the optimal separation angles that maximize the total mutual information of the system for various compact MIMO antennas. Simulation results show that although the mutual information is degraded by mutual coupling and spatial correlation, the proposed HAP diversity system still provides better performance compared to a nondiversity system for all tested scenarios.

  8. Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines

    DEFF Research Database (Denmark)

    Kallesøe, Bjarne Skovmose

    conversion platform, Poseidon, is own and operated by Floating Power Plant A/S. The platform has been operating for two test periods; one period where it was operating as a wave energy conversion platform only and one period where the three turbines was mounted and the platform operated as a combined wind...... and wave energy platform. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the first test period has been used for determine if the turbine could be mounted on the platform. Preliminary...... analysis of data from the second test period indicates that the platform is suitable as wind turbine foundation and that the turbines reduce the platform motion....

  9. The Fuzzy and Compartment System Concept for the Communication System Taking Account of the Handicapped Situation

    Directory of Open Access Journals (Sweden)

    Masahiro Aruga

    2011-02-01

    Full Text Available In the previous papers the process of structuring the Life support system to consider the essential meaning of the ubiquitous system has been presented. There the Life support system is shown as it is synthesized from the Expanded EMR and on the basis of such an essential concept of the ubiquitous system as it is in the recovery of lost functions of ordinary persons. The Life support system has been described to be synthesized with embedding the communication system for the handicapped people as a module, and as such an example of the embedded comunication system as a module the "YUBITSUKIYI" system has been described. Considering the synthesis of the Life support system the transmission structure of information of this system has been needed to be studied, and there some concepts over the ordinary Shannon

  10. Continuous Platform Development

    DEFF Research Database (Denmark)

    Nielsen, Ole Fiil

    low risks and investments but also with relatively fuzzy results. When looking for new platform projects, it is important to make sure that the company and market is ready for the introduction of platforms, and to make sure that people from marketing and sales, product development, and downstream......, but continuous product family evolution challenges this strategy. The concept of continuous platform development is based on the fact that platform development should not be a one-time experience but rather an ongoing process of developing new platforms and updating existing ones, so that product family...

  11. A Mission Simulation and Evaluation Platform for Terrestrial Hydrology using the NASA Land Information System (LIS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a mission simulation and evaluation platform for terrestrial hydrology missions by creating an end-to-end observation system simulation experiment (OSSE)...

  12. Evaluation of Variable Refrigerant Flow Systems Performance on Oak Ridge National Laboratory s Flexible Research Platform: Part 3 Simulation Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Im, Piljae [ORNL; Cho, Heejin [Mississippi State University (MSU); Kim, Dongsu [Mississippi State University (MSU); Cox, Sam [Mississippi State University (MSU)

    2016-08-01

    This report provides second-year project simulation results for the multi-year project titled “Evaluation of Variable Refrigeration Flow (VRF) system on Oak Ridge National Laboratory (ORNL)’s Flexible Research Platform (FRP).”

  13. Noise technologies and systems for monitoring the beginning of the latent period of accidents on fixed platforms

    Science.gov (United States)

    Aliev, T. A.; Alizada, T. A.; Rzayeva, N. E.

    2017-03-01

    The authors analyse the causes of frequent failures of fixed oil platforms. It has been discovered that noise in the noisy signals received by the sensors of control systems in many cases contains valuable information about the beginning of a platform's transition into the latent period of an emergency state. Considering this specific characteristic, technologies for calculating estimates of the robust correlation functions have been developed. These technologies allow one to determine the noise characteristics and form correlation matrices equivalent to the matrices of the useful signals. Based on these technologies, the authors propose systems for monitoring the beginning of the latent period of the transition of fixed platforms into an emergency state.

  14. Spatial Modulation Concept for Massive Multiuser MIMO Systems

    Directory of Open Access Journals (Sweden)

    Khaled M. Humadi

    2014-01-01

    Full Text Available This paper presents the concept of spatial modulation (SM scheme for massive multiuser MIMO (MU-MIMO system. We consider a MU-MIMO system where K users, each equipped with multiple antennas, are jointly serviced by a multiantenna base station transmitter (BSTx using appropriate precoding scheme at the BSTx. The main idea introduced here is the utilization of the user’s subchannel index corresponding to the precoding matrix used at the BSTx, to convey extra useful information. This idea has not been explored, and it provides significant throughput enhancements in a multiuser system with large number of users. We examine the performance of the proposed scheme by numerical simulations. The results show that as the number of users and the receiving antennas for each user increase, the overall system throughput gets better, albeit at the cost of some degradation in the BER performance due to interantenna interference (IAI experienced at the receiver. We then explore zero-padding approach that helps to remove these IAI, in order to alleviate the BER degradations.

  15. Motivational Factors on Adopting Modular Coordination Concept in Industrialized Building System (IBS

    Directory of Open Access Journals (Sweden)

    Yunus Riduan

    2016-01-01

    Full Text Available Modular coordination (MC is recognized as a tool towards rationalization and industrialization. The implementation of MC concept in the design stage may improve the constructability and construction time. However, the implementation of MC in Industrialized Building System (IBS implementation is still low compare to other developed countries such as the United Kingdom, Sweden and Japan. This paper examined the interrelationship between motivational factors of stakeholders in adopting MC concept using Interpretative Structural Modeling (ISM. Questionnaire survey was engaged in this study to identify significant motivational factors. Then, semi-structure interviews were used to collect qualitative data. ISM was adopted to build relationship between factors and develop an initial model to promote the adoption of MC in IBS construction. Seven (7 significant motivational factors were identified in this research namely 1 ‘stakeholder’s commitment’, 2 ‘reduce site disruption’, 3 ‘increase productivity’, 4 ‘high skilled workers’, 5 ‘site sustainability (environment, economy and social benefits’ 6 ‘standardization’ and 7 ‘enabling ‘open building’ concept’. The result using Matrice d’Impacts Croises Multiplication Applique an Clasment (MICMAC shows that there are three factors can be categorized as Independent / Driving Factors namely ‘stakeholder’s commitment’, ‘standardization’ and ‘enabling “open building” concept’. These factors should be explored in details to enhance the adoption of IBS in Malaysia. The findings provide a very good platform for a further research in formulating an efficient solution to promote MC concept adoption among the stakeholders. This scenario will improve the deliverables of IBS construction and eliminate negative perception in its implementation.

  16. A computational platform for modeling and simulation of pipeline georeferencing systems

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, A.G.; Pellanda, P.C.; Gois, J.A. [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Roquette, P.; Pinto, M.; Durao, R. [Instituto de Pesquisas da Marinha (IPqM), Rio de Janeiro, RJ (Brazil); Silva, M.S.V.; Martins, W.F.; Camillo, L.M.; Sacsa, R.P.; Madeira, B. [Ministerio de Ciencia e Tecnologia (CT-PETRO2006MCT), Brasilia, DF (Brazil). Financiadora de Estudos e Projetos (FINEP). Plano Nacional de Ciencia e Tecnologia do Setor Petroleo e Gas Natural

    2009-07-01

    This work presents a computational platform for modeling and simulation of pipeline geo referencing systems, which was developed based on typical pipeline characteristics, on the dynamical modeling of Pipeline Inspection Gauge (PIG) and on the analysis and implementation of an inertial navigation algorithm. The software environment of PIG trajectory simulation and navigation allows the user, through a friendly interface, to carry-out evaluation tests of the inertial navigation system under different scenarios. Therefore, it is possible to define the required specifications of the pipeline geo referencing system components, such as: required precision of inertial sensors, characteristics of the navigation auxiliary system (GPS surveyed control points, odometers etc.), pipeline construction information to be considered in order to improve the trajectory estimation precision, and the signal processing techniques more suitable for the treatment of inertial sensors data. The simulation results are analyzed through the evaluation of several performance metrics usually considered in inertial navigation applications, and 2D and 3D plots of trajectory estimation error and of recovered trajectory in the three coordinates are made available to the user. This paper presents the simulation platform and its constituting modules and defines their functional characteristics and interrelationships.(author)

  17. System Concept Design for the New Worlds Observer

    Science.gov (United States)

    Simmons, W.; Kasdin, N. J.; Vanderbei, R. J.; Cash, W.

    2003-12-01

    The New Worlds Observer (NWO) is a proposed space mission to provide high resolution spectroscopy from the far UV to the near IR of extra-solar terrestrial sized planets. The design of NWO is based on the concept of a large space-based pinhole camera made up of two spacecraft flying in formation. The first spacecraft is a large, thin occulting shield (perhaps 100's of meters in diameter) with a ``pinhole'' aperture about 10m in diameter. The second spacecraft is a conventional-quality space telescope (possibly with a 10m primary mirror) which "flies" in the focal plane of the camera to observe the image of the extra-solar planets. In this paper we describe the design of the two spacecraft system. In particular, the pinhole design utilizes the shaped pupil coronagraph pioneered for the Terrestrial Planet Finder. We describe the analysis and design of shaped ``pinholes'' to achieve the high contrast necessary for planet finding.

  18. Zero Gravity Cryogenic Vent System Concepts for Upper Stages

    Science.gov (United States)

    Ravex, Alain; Flachbart, Robin; Holt, Barney

    The capability to vent in zero gravity without resettling is a technology need that involves practically all uses of sub-critical cryogenics in space. Venting without resettling would extend cryogenic orbital transfer vehicle capabilities. However, the lack of definition regarding liquid/ullage orientation coupled with the somewhat random nature of the thermal stratification and resulting pressure rise rates, lead to significant technical challenges. Typically a zero gravity vent concept, termed a thermodynamic vent system (TVS), consists of a tank mixer to destratify the propellant, combined with a Joule-Thomson (J-T) valve to extract thermal energy from the propellant. Marshall Space Flight Center's (MSFC's) Multipurpose Hydrogen Test Bed (MHTB) was used to test both spray bar and axial jet TVS concepts. The axial jet system consists of a recirculation pump heat exchanger unit. The spray bar system consists of a recirculation pump, a parallel flow concentric tube, heat exchanger, and a spray bar positioned close to the longitudinal axis of the tank. The operation of both concepts is similar. In the mixing mode, the recirculation pump withdraws liquid from the tank and sprays it into the tank liquid, ullage, and exposed tank surfaces. When energy extraction is required, a small portion of the recirculated liquid is passed sequentially through the J-T expansion valve, the heat exchanger, and is vented overboard. The vented vapor cools the circulated bulk fluid, thereby removing thermal energy and reducing tank pressure. The pump operates alone, cycling on and off, to destratify the tank liquid and ullage until the liquid vapor pressure reaches the lower set point. At that point, the J-T valve begins to cycle on and off with the pump. Thus, for short duration missions, only the mixer may operate, thus minimizing or even eliminating boil-off losses. TVS performance testing demonstrated that the spray bar was effective in providing tank pressure control within a 6

  19. Concepts and mechanisms of generalized central nervous system arousal.

    Science.gov (United States)

    Pfaff, Donald; Ribeiro, Ana; Matthews, James; Kow, Lee-Ming

    2008-01-01

    A concept of generalized arousal of the CNS is presented and given an operational definition that leads to quantitative physical measures. Because this primitive arousal function underlies all motivated behavioral responses, cognitive functions, and emotional expression, disorders of generalized arousal can be associated with a large number of problems in medicine and public health, including vegetative states, attentional disorders, depression, occupational hazards, and problems with sleep and anesthesia. Some of its known mechanisms are briefly reviewed, at the levels of neuroanatomy, neurophysiology, and functional genomics. Generalized arousal contributes to the excitement and the activation of behaviors during specific arousal states. Data are summarized for four genomic/neurochemical systems through which changes in generalized arousal could affect sexual arousal, two of which heighten, and the other two of which reduce arousal.

  20. Content Management System for Developing a Virtual Platform for Association of Women's Aid with Lack of Resources

    Science.gov (United States)

    Sainz de Abajo, Beatriz; Flores García, Alberto; García Salcines, Enrique; Burón Fernández, F. Javier; López Coronado, Miguel; de Castro Lozano, Carlos

    In this paper we show a Virtual Platform for an Association of Women's Aid called Centro Integral de Ayuda a la Mujer (CIAM). After analyzing different Content Management Systems (CMS) and the benefits that its use would contribute to the development of the Virtual Platform, taking into account the needs and requirements set by CIAM, we have opted for the use of Joomla!. This free CMS, for its characteristics, is the most benefits provided us. The virtual platform design has been developed following customer specifications, to have understood the simplicity and easy handling of the resulting platform. This platform will be integrated into the Web portal that has the Amarex Association and it will be able to be administrates from the CIAM without specific knowledge of programming languages. If new services were necessary, they would be easily implemented, adding new modules and components to perform these services.

  1. Sensor programming and concept implementation of a temperature monitoring system, using Arduino as prototyping platform

    DEFF Research Database (Denmark)

    Sbîrnă, Sebastian; Søberg, Peder Veng; Sbîrnă, Liana Simona

    2016-01-01

    . The mentioned solution is designed to be cost-efficient and versatile, so that it can compete with available solutions. This paper also contributes with explanations of ideas behind our coding approach and solutions to encountered problems, along with a detailed insight into the flow of execution of our program...

  2. Strategic Mobility 21: SM21 CONOPS Revised - Phase II, Joint Force Deployment and Distribution Support Platform: Joint Operational Concept

    Science.gov (United States)

    2009-12-02

    will serve as a High Cube (overloaded containers) High Throughput Velocity (7/24/365 operations), High Value (electronics, pharmaceuticals ...major planned attrition of Union Pacific rail crew personnel, rail car equipment availability problems traceable back to the UP-SP rail system merger ...and Respond Logistics Road Map for the Assistant Under Secretary of Defense for Acquisition Technology and Logistics. A series of pilot

  3. Progress on Concepts for Next-Generation Drop Tower Systems

    Science.gov (United States)

    Könemann, Thorben; Eigenbrod, Christian; Von Kampen, Peter; Laemmerzahl, Claus; Kaczmarczik, Ulrich

    2016-07-01

    The Center of Applied Space Technology and Microgravity (ZARM) founded by Prof. Dr.-Ing. Hans J. Rath in 1985 is part of the Department of Production Engineering at the University of Bremen, Germany. ZARM is mainly concentrated on fundamental investigations of gravitational and space-related phenomenas under conditions of weightlessness as well as questions and developments related to technologies for space. At ZARM about 100 scientists, engineers, and administrative staff as well as many students from different departments are employed. Today, ZARM is still one of the largest and most important research center for space sciences and technologies in Europe. With a height of 146 m the Bremen Drop Tower is the predominant facility of ZARM and also the only drop tower of its class in Europe. ZARM's ground-based laboratory offers the opportunity for daily short-term experiments under conditions of high-quality weightlessness at a level of 10-6 g (microgravity), which is one of the best achievable for ground-based flight opportunities. Scientists may choose up to three times a day between a single drop experiment with 4.74 s in simple free fall and an experiment in ZARM's worldwide unique catapult system with 9.3 s in weightlessness. Since the start of operation of the facility in 1990, over 7500 drops or catapult launches of more than 160 different experiment types from various scientific fields like fundamental physics, combustion, fluid dynamics, planetary formation / astrophysics, biology and materials sciences have been accomplished so far. In addition, more and more technology tests have been conducted under microgravity conditions at the Bremen Drop Tower in order to effectively prepare appropriate space missions in advance. In this paper we report on the progress on concepts for next-generation drop tower systems based on the GraviTower idea utilizing a guided electro-magnetic linear drive. Alternative concepts motivated by the scientific demand for higher

  4. Design and Dynamic Analysis of Tension Leg Platform Wind Turbines

    OpenAIRE

    Bachynski, Erin Elizabeth

    2014-01-01

    There is an increasing interest in using wind turbines oshore, and in deeper water. The tension leg platform wind turbine (TLPWT) concept is promising for intermediate (45 - 150 m) or deep (> 150 m) water. The limited platform motions are expected to reduce the structural loading on the tower and blades compared to other floating concepts, without requiring the large draft of a spar or the spread mooring system and complex construction of a semi-submersible. Although numerous TLPWT designs...

  5. Integrated System Health Management: Foundational Concepts, Approach, and Implementation.

    Science.gov (United States)

    Figueroa, Fernando; Schmalzel, John; Walker, Mark; Venkatesh, Meera; Kapadia, Ravi; Morris, Jon; Turowski, Mark; Smith, Harvey

    2009-01-01

    Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. We present concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a system. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: 1. ISHM Model of a system 2. Detection of anomaly indicators. 3. Determination and confirmation of anomalies. 4. Diagnostic of causes and determination of effects. 5. Consistency checking cycle. 6. Management of health information 7. User Interfaces 8. Example implementation ISHM has been defined from many perspectives. We define it as a capability that might be achieved by various approaches. We describe a specific approach that has been matured throughout many years of development, and pilot implementations. ISHM is a capability that is achieved by integrating data, information, and knowledge (DIaK) that might be distributed throughout the system elements (which inherently implies capability to manage DIaK associated with distributed sub-systems). DIaK must be available to any element of a system at the right time and in accordance with a meaningful context. ISHM Functional Capability Level (FCL) is measured by how well a system performs the following

  6. Assessing System Thinking Through Different Concept-Mapping Practices

    Science.gov (United States)

    Brandstädter, Kristina; Harms, Ute; Großschedl, Jörg

    2012-09-01

    System thinking is usually investigated by using questionnaires, video analysis, or interviews. Recently, concept-mapping (CM) was suggested as an adequate instrument for analysing students' system thinking. However, there are different ways with which to use this method. Therefore, the purpose of this study was to examine whether particular features of CM practices affect the valid assessment of students' system thinking. The particular features analysed were the medium (computer versus paper-pencil) and the directedness (highly directed versus nondirected) of CM practices. These features were evaluated with respect to their influence on (a) students' performance in CM and (b) the validity of different CM practices for system thinking. One hundred fifty-four German fourth graders (mean age: 9.95 years) and 93 eighth graders (mean age: 14.07 years) participated in the study following an experimental pre-test-post-test design. Three variations of CM practices were applied: (a) highly directed computer mapping, (b) highly directed paper-pencil mapping, and (c) nondirected paper-pencil mapping. In addition to the CM task, a paper-pencil questionnaire was employed to investigate the validity of the CM practices. Results showed that the computer positively influenced student performance in CM when compared with paper-pencil. By contrast, there was no difference between highly directed and nondirected mapping. Whereas the medium rarely influenced the validity of CM for system thinking, high directedness showed a positive influence. Considering the limitations and benefits of particular CM practices, we suggest highly directed and computer-based CM as an appropriate assessment tool-in particular, with regard to large-scale assessments of system thinking.

  7. Developing wearable bio-feedback systems: a general-purpose platform.

    Science.gov (United States)

    Bianchi, Luigi; Babiloni, Fabio; Cincotti, Febo; Arrivas, Marco; Bollero, Patrizio; Marciani, Maria Grazia

    2003-06-01

    Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.

  8. Intelligent Platform Management Controller for Low Level RF Control System ATCA Carrier Board

    CERN Document Server

    Predki, Pawel

    2011-01-01

    High availability and reliability are among the most desirable features of control systems in modern High-Energy Physics (HEP) and other big-scale scientific experiments. One of the recent developments that has influenced this field was the emergence of the Advanced Telecommunications Computing Architecture (ATCA). Designed for the telecommunications industry it has been successfully applied in other domains such as accelerator control systems. A good example is the application of ATCA stan- dard for the design of Low Level RF (LLRF) control system for the X-Ray Free Electron Laser (XFEL) being developed in Deutsches Elektronen Synchrotron (DESY). Reliability and availability requirements for such a device play a crucial role among other parameters. Thus, the ATCA standard, with five- nines availability, is considered one of the best candidates for this system. This article focuses on the central management unit of every ATCA board, namely the Intelligent Platform Management Controller (IPMC), developed for t...

  9. On the Connectivity of Wireless Network Systems and an Application in Teacher-Student Interactive Platforms

    Directory of Open Access Journals (Sweden)

    Xun Ge

    2014-01-01

    Full Text Available A wireless network system is a pair (U;B, where B is a family of some base stations and U is a set of their users. To investigate the connectivity of wireless network systems, this paper takes covering approximation spaces as mathematical models of wireless network systems. With the help of covering approximation operators, this paper characterizes the connectivity of covering approximation spaces by their definable subsets. Furthermore, it is obtained that a wireless network system is connected if and only if the relevant covering approximation space has no nonempty definable proper subset. As an application of this result, the connectivity of a teacher-student interactive platform is discussed, which is established in the School of Mathematical Sciences of Soochow University. This application further demonstrates the usefulness of rough set theory in pedagogy and makes it possible to research education by logical methods and mathematical methods.

  10. Lifting Entry & Atmospheric Flight (LEAF) System Concept Applications at Solar System Bodies With an Atmosphere

    Science.gov (United States)

    Lee, Greg; Polidan, Ronald; Ross, Floyd; Sokol, Daniel; Warwick, Steve

    2015-11-01

    Northrop Grumman and L’Garde have continued the development of a hypersonic entry, semi-buoyant, maneuverable platform capable of performing long-duration (months to a year) in situ and remote measurements at any solar system body that possesses an atmosphere.The Lifting Entry & Atmospheric Flight (LEAF) family of vehicles achieves this capability by using a semi-buoyant, ultra-low ballistic coefficient vehicle whose lifting entry allows it to enter the atmosphere without an aeroshell. The mass savings realized by eliminating the heavy aeroshell allows significantly more payload to be accommodated by the platform for additional science collection and return.In this presentation, we discuss the application of the LEAF system at various solar system bodies: Venus, Titan, Mars, and Earth. We present the key differences in platform design as well as operational differences required by the various target environments. The Venus implementation includes propulsive capability to reach higher altitudes during the day and achieves full buoyancy in the mid-cloud layer of Venus’ atmosphere at night.Titan also offers an attractive operating environment, allowing LEAF designs that can target low or medium altitude operations, also with propulsive capabilities to roam within each altitude regime. The Mars version is a glider that descends gradually, allowing targeted delivery of payloads to the surface or high resolution surface imaging. Finally, an Earth version could remain in orbit in a stowed state until activated, allowing rapid response type deployments to any region of the globe.

  11. Corin/Dorin: A WDM-Enabled Platform for Aero-Engine Control Systems

    OpenAIRE

    Xia, Ming; Moslehi, Behzad; Mukherjee, Biswanath; Behbahani, Alireza; Millar, Richard

    2008-01-01

    The Full Authority Digital Electronic Control (FADEC) centralized architecture has become the norm in aero-engine control systems. With a centralized system, changes are costly and complex [1]. The goal of this work is to develop the architectural design concept for a distributed supporting network called Coarse WDM Optical Ring Network (CORIN) appropriate for aero-engine performance monitoring. A CORIN features high bandwidth, reliability, modularity, scalability, flexibility, an...

  12. Android System Transplant Based on S3C6410 Platform%S3C6410平台下Android系统的移植

    Institute of Scientific and Technical Information of China (English)

    卢望; 陈少航; 李精华

    2011-01-01

    论文首先简要分析了Android的结构,给出了Android内核的修改的思路以及Android文件系统的制作方法,最终实现了Android系统在ARM11平台上的移植和运行。%This paper begins with a brief analysis of the structure of Android,the Android kernel changes are given the idea and method of making Android file system,and ultimately the Android system on the ARMI I platform porting and running.

  13. Computer-operated analytical platform for the determination of nutrients in hydroponic systems.

    Science.gov (United States)

    Rius-Ruiz, F Xavier; Andrade, Francisco J; Riu, Jordi; Rius, F Xavier

    2014-03-15

    Hydroponics is a water, energy, space, and cost efficient system for growing plants in constrained spaces or land exhausted areas. Precise control of hydroponic nutrients is essential for growing healthy plants and producing high yields. In this article we report for the first time on a new computer-operated analytical platform which can be readily used for the determination of essential nutrients in hydroponic growing systems. The liquid-handling system uses inexpensive components (i.e., peristaltic pump and solenoid valves), which are discretely computer-operated to automatically condition, calibrate and clean a multi-probe of solid-contact ion-selective electrodes (ISEs). These ISEs, which are based on carbon nanotubes, offer high portability, robustness and easy maintenance and storage. With this new computer-operated analytical platform we performed automatic measurements of K(+), Ca(2+), NO3(-) and Cl(-) during tomato plants growth in order to assure optimal nutritional uptake and tomato production. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. The health systems funding platform and World Bank legacy: the gap between rhetoric and reality.

    Science.gov (United States)

    Brown, Scott S; Sen, Kasturi; Decoster, Kristof

    2013-03-06

    Global health partnerships created to encourage funding efficiencies need to be approached with some caution, with claims for innovation and responsiveness to development needs based on untested assumptions around the potential of some partners to adapt their application, funding and evaluation procedures within these new structures. We examine this in the case of the Health Systems Funding Platform, which despite being set up some three years earlier, has stalled at the point of implementation of its key elements of collaboration. While much of the attention has been centred on the suspension of the Global Fund's Round 11, and what this might mean for health systems strengthening and the Platform more broadly, we argue that inadequate scrutiny has been made of the World Bank's contribution to this partnership, which might have been reasonably anticipated based on an historical analysis of development perspectives. Given the tensions being created by the apparent vulnerability of the health systems strengthening agenda, and the increasing rhetoric around the need for greater harmonization in development assistance, an examination of the positioning of the World Bank in this context is vital.

  15. Two-Phase Thermal Switching System for a Small, Extended Duration Lunar Science Platform

    Science.gov (United States)

    Bugby, D.; Farmer, J.; OConnor, B.; Wirzburger, M.; Abel, E.; Stouffer, C.

    2010-01-01

    Issue: extended duration lunar science platforms, using solar/battery or radioisotope power, require thermal switching systems that: a) Provide efficient cooling during the 15-earth-day 390 K lunar day; b) Consume minimal power during the 15-earth-day 100 K lunar night. Objective: carry out an analytical study of thermal switching systems that can meet the thermal requirements of: a) International Lunar Network (ILN) anchor node mission - primary focus; b) Other missions such as polar crater landers. ILN Anchor Nodes: network of geophysical science platforms to better understand the interior structure/composition of the moon: a) Rationale: no data since Apollo seismic stations ceased operation in 1977; b) Anchor Nodes: small, low-power, long-life (6-yr) landers with seismographic and a few other science instruments (see next chart); c) WEB: warm electronics box houses ILN anchor node electronics/batteries. Technology Need: thermal switching system that will keep the WEB cool during the lunar day and warm during the lunar night.

  16. System-in-package LTCC platform for 3D RF to millimeter wave

    Science.gov (United States)

    Vähä-Heikkilä, T.; Lahti, M.

    2011-04-01

    This presentation shows recent trends and results in 3D Low Temperature Co-Fired Ceramics (LTCC) modules in applications from RF to millimeter waves. The system-in-package LTCC platform is a true three dimensional module technology. LTCC is a lightweight multi-layer technology having typically 6-20 ceramic layers and metallizations between. The metallization levels i.e different metal layers can be patterned and connected together with metal vias. Passive devices can also be fabricated on LTCC while active devices and other chips are connected with flip-chip, wire bonding or soldering. In addition to passives directly fabricated to LTCC, several different technologies/ chips can be hybrid integrated to the same module. LTCC platform is also well suited for the realization of antenna arrays for microwave and millimeter wave applications. Potential applications are ranging from short range communications to space and radars. VTT has designed, fabricated and characterized microwave and millimeter wave packages for Radio Frequency (RF) Micro Electro Mechanical Systems (MEMS) as well as active devices. Also, several types of system-in-package modules have been realized containing hybrid integrated CMOS and GaAs MMICs and antenna arrays.

  17. Our System IDCBR-MAS: from the Modelisation by AUML to the Implementation under JADE Platform

    Directory of Open Access Journals (Sweden)

    Abdelhamid Zouhair

    2014-06-01

    Full Text Available This paper presents our work in the field of Intelligent Tutoring System (ITS, in fact there is still the problem of knowing how to ensure an individualized and continuous learners follow-up during learning process, indeed among the numerous methods proposed, very few systems concentrate on a real time learners follow-up. Our work in this field develops the design and implementation of a Multi-Agents System Based on Dynamic Case Based Reasoning which can initiate learning and provide an individualized follow-up of learner. This approach involves 1 the use of Dynamic Case Based Reasoning to retrieve the past experiences that are similar to the learner’s traces (traces in progress, and 2 the use of Multi-Agents System. Our Work focuses on the use of the learner traces. When interacting with the platform, every learner leaves his/her traces on the machine. The traces are stored in database, this operation enriches collective past experiences. The traces left by the learner during the learning session evolve dynamically over time; the case-based reasoning must take into account this evolution in an incremental way. In other words, we do not consider each evolution of the traces as a new target, so the use of classical cycle Case Based reasoning in this case is insufficient and inadequate. In order to solve this problem, we propose a dynamic retrieving method based on a complementary similarity measure, named Inverse Longest Common Sub-Sequence (ILCSS. Through monitoring, comparing and analyzing these traces, the system keeps a constant intelligent watch on the platform, and therefore it detects the difficulties hindering progress, and it avoids possible dropping out. The system can support any learning subject. To help and guide the learner, the system is equipped with combined virtual and human tutors.

  18. ITS Platform

    DEFF Research Database (Denmark)

    Tøfting, Svend; Lahrmann, Harry; Agerholm, Niels

    2014-01-01

    Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden ...... not have to be very intelligent. This is gradually taken over by applications on smart phones. The ITS Platform with 425 test drivers is now completely developed and can be used for technological testing of e.g. payment systems....

  19. ITS Platform

    DEFF Research Database (Denmark)

    Tøfting, Svend; Lahrmann, Harry; Agerholm, Niels

    2014-01-01

    Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden ...... not have to be very intelligent. This is gradually taken over by applications on smart phones. The ITS Platform with 425 test drivers is now completely developed and can be used for technological testing of e.g. payment systems.......Aalborg University and two local companies have over the past four years developed and tested an ITS Platform, which can be used for communication with cars and for providing a number of services to the drivers. The purpose has been to perform a technological test of the possible use of a hidden...

  20. Design of the Hospital Integrated Information Management System Based on Cloud Platform.

    Science.gov (United States)

    Aijing, L; Jin, Y

    2016-04-18

    At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money.

  1. Design of the Hospital Integrated Information Management System Based on Cloud Platform

    Science.gov (United States)

    Aijing, L; Jin, Y

    2015-01-01

    ABSTRACT At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money. PMID:27399033

  2. UQLab - A Software Platform for Uncertainty Quantification of Complex System Models

    Science.gov (United States)

    Wang, C.; Duan, Q.; Gong, W.

    2014-12-01

    UQLab (Uncertainty quantification Laboratory) is a flexible, user-friendly software platform that integrates different kinds of UQ methods including experimental design, sensitivity analysis, uncertainty analysis, surrogate modeling and optimization methods to characterize uncertainty of complex system models. It is written in Python language and can run on all common operating systems. UQLab has a graphic user interface (GUI) that allows users to enter commands and output analysis results via pull-down menus. It is equipped with a model driver generator that allows any system model to be linked with the software. The only requirement is to make sure the executable code, control file and output file of interest of a model accessible by the software. Through two geophysics models: the Sacramento Soil Moisture Accounting Model (SAC-SMA) and Common Land Model (CoLM), this presentation intends to demonstrate that UQLab is an effective and easy UQ tool to use, and can be applied to a wide range of applications.

  3. MULTIFUNCTIONAL PLATFORMS AND

    African Journals Online (AJOL)

    Solar service centres and multifunctional platforms are innovative concepts for providing energy services in ... same time generate income. obeng ..... communities the driving force behind the ... operator(s) had to contact repairers outside their.

  4. The Concept of Extraordinary Crime in Indonesia Legal System: Is The Concept an Effective Criminal Policy?

    Directory of Open Access Journals (Sweden)

    Vidya Prahassacitta

    2016-10-01

    crime parts of criminal policy does not have any standard for the categorization. Then, as consequences of the implementation of the concept of extraordinary crime in several penal efforts are formulating in legislations. The penalty effort is not limited to criminalization and sentencing aspects but wider and shall be in line with the strategy of crime eradication and welfare protection purposes. To reach the effectiveness of the criminal policy of the concept of extraordinary crime, the penalty effort shall be in line with criminal law principles and human right basic principles.

  5. A Guide RNA Sequence Design Platform for the CRISPR/Cas9 System for Model Organism Genomes

    Directory of Open Access Journals (Sweden)

    Ming Ma

    2013-01-01

    Full Text Available Cas9/CRISPR has been reported to efficiently induce targeted gene disruption and homologous recombination in both prokaryotic and eukaryotic cells. Thus, we developed a Guide RNA Sequence Design Platform for the Cas9/CRISPR silencing system for model organisms. The platform is easy to use for gRNA design with input query sequences. It finds potential targets by PAM and ranks them according to factors including uniqueness, SNP, RNA secondary structure, and AT content. The platform allows users to upload and share their experimental results. In addition, most guide RNA sequences from published papers have been put into our database.

  6. Concept of magnet systems for LHD-type reactor

    Science.gov (United States)

    Imagawa, S.; Takahata, K.; Tamura, H.; Yanagi, N.; Mito, T.; Obana, T.; Sagara, A.

    2009-07-01

    Heliotron reactors have attractive features for fusion power plants such as having no need for current drive and a wide space between the helical coils for the maintenance of in-vessel components. Their main disadvantage was considered to be the necessarily large size of their magnet systems. According to the recent reactor studies based on the experimental results in the Large Helical Device, a major radius of plasma of 14-17 m with a central toroidal field of 6-4 T is needed to attain the self-ignition condition with a blanket space thicker than 1.1 m. The stored magnetic energy is estimated at 120-140 GJ. Although both the major radius and the magnetic energy are about three times as large as ITER, the maximum magnetic field and mechanical stress are comparable. In the preliminary structural analysis, the maximum stress intensity including the peak stress is less than the 1000 MPa that is allowed for strengthened stainless steel. Although the length of the helical coil is more than 150 m, that is about five times as long as the ITER TF coil, cable-in-conduit conductors can be adopted with a parallel winding method of five-in-hand. The concept of the parallel winding is proposed. Consequently, the magnet systems for helical reactors can be realized with a small extension of the ITER technology.

  7. Green IT engineering concepts, models, complex systems architectures

    CERN Document Server

    Kondratenko, Yuriy; Kacprzyk, Janusz

    2017-01-01

    This volume provides a comprehensive state of the art overview of a series of advanced trends and concepts that have recently been proposed in the area of green information technologies engineering as well as of design and development methodologies for models and complex systems architectures and their intelligent components. The contributions included in the volume have their roots in the authors’ presentations, and vivid discussions that have followed the presentations, at a series of workshop and seminars held within the international TEMPUS-project GreenCo project in United Kingdom, Italy, Portugal, Sweden and the Ukraine, during 2013-2015 and at the 1st - 5th Workshops on Green and Safe Computing (GreenSCom) held in Russia, Slovakia and the Ukraine. The book presents a systematic exposition of research on principles, models, components and complex systems and a description of industry- and society-oriented aspects of the green IT engineering. A chapter-oriented structure has been adopted for this book ...

  8. A context management system for a cost-efficient smart home platform

    Science.gov (United States)

    Schneider, J.; Klein, A.; Mannweiler, C.; Schotten, H. D.

    2012-09-01

    This paper presents an overview of state-of-the-art architectures for integrating wireless sensor and actuators networks into the Future Internet. Furthermore, we will address advantages and disadvantages of the different architectures. With respect to these criteria, we develop a new architecture overcoming these weaknesses. Our system, called Smart Home Context Management System, will be used for intelligent home utilities, appliances, and electronics and includes physical, logical as well as network context sources within one concept. It considers important aspects and requirements of modern context management systems for smart X applications: plug and play as well as plug and trust capabilities, scalability, extensibility, security, and adaptability. As such, it is able to control roller blinds, heating systems as well as learn, for example, the user's taste w.r.t. to home entertainment (music, videos, etc.). Moreover, Smart Grid applications and Ambient Assisted Living (AAL) functions are applicable. With respect to AAL, we included an Emergency Handling function. It assures that emergency calls (police, ambulance or fire department) are processed appropriately. Our concept is based on a centralized Context Broker architecture, enhanced by a distributed Context Broker system. The goal of this concept is to develop a simple, low-priced, multi-functional, and save architecture affordable for everybody. Individual components of the architecture are well tested. Implementation and testing of the architecture as a whole is in progress.

  9. ZBIT Bioinformatics Toolbox: A Web-Platform for Systems Biology and Expression Data Analysis.

    Science.gov (United States)

    Römer, Michael; Eichner, Johannes; Dräger, Andreas; Wrzodek, Clemens; Wrzodek, Finja; Zell, Andreas

    2016-01-01

    Bioinformatics analysis has become an integral part of research in biology. However, installation and use of scientific software can be difficult and often requires technical expert knowledge. Reasons are dependencies on certain operating systems or required third-party libraries, missing graphical user interfaces and documentation, or nonstandard input and output formats. In order to make bioinformatics software easily accessible to researchers, we here present a web-based platform. The Center for Bioinformatics Tuebingen (ZBIT) Bioinformatics Toolbox provides web-based access to a collection of bioinformatics tools developed for systems biology, protein sequence annotation, and expression data analysis. Currently, the collection encompasses software for conversion and processing of community standards SBML and BioPAX, transcription factor analysis, and analysis of microarray data from transcriptomics and proteomics studies. All tools are hosted on a customized Galaxy instance and run on a dedicated computation cluster. Users only need a web browser and an active internet connection in order to benefit from this service. The web platform is designed to facilitate the usage of the bioinformatics tools for researchers without advanced technical background. Users can combine tools for complex analyses or use predefined, customizable workflows. All results are stored persistently and reproducible. For each tool, we provide documentation, tutorials, and example data to maximize usability. The ZBIT Bioinformatics Toolbox is freely available at https://webservices.cs.uni-tuebingen.de/.

  10. COOPERATIVE DIRECTIONAL INTER-CELL HANDOVER SCHEME IN HIGH ALTITUDE PLATFORM COMMUNICATIONS SYSTEMS

    Institute of Scientific and Technical Information of China (English)

    Li Shufeng; Wang Lijie; David Grace; Ma Dongtang

    2011-01-01

    A novel Cooperative Directional inter-cell Handover Scheme (CDHS) for High Altitude Platform (HAP) communications systems is proposed,in which the handover target cell and the two cells adjacent to this handover target cell work cooperatively to exploit the traffic fluctuation to improve handover performance.Users in the overlap area of the overloaded handover target cell will be forced to handover directionally before their optimal handover boundary in order to free up resources for the handover calls which would otherwise be dropped due to the shortage of resources and queue time out.Simulation results show that the handover call dropping probability is greatly reduced (at least 60%) compared with the general queue handover scheme,with little performancereduction to the call blocking probability,and the Not in the Best Cell (NBC) average time is only increased moderately.Moreover,an optimal cell radius can be achieved for a specific platform speed by minimizing the unified system performance,which is the linear combination of the handover call dropping probability and the NBC average time.

  11. The German Mouse Clinic: a platform for systemic phenotype analysis of mouse models.

    Science.gov (United States)

    Fuchs, H; Gailus-Durner, V; Adler, T; Pimentel, J A Aguilar; Becker, L; Bolle, I; Brielmeier, M; Calzada-Wack, J; Dalke, C; Ehrhardt, N; Fasnacht, N; Ferwagner, B; Frischmann, U; Hans, W; Hölter, S M; Hölzlwimmer, G; Horsch, M; Javaheri, A; Kallnik, M; Kling, E; Lengger, C; Maier, H; Mossbrugger, I; Mörth, C; Naton, B; Nöth, U; Pasche, B; Prehn, C; Przemeck, G; Puk, O; Racz, I; Rathkolb, B; Rozman, J; Schäble, K; Schreiner, R; Schrewe, A; Sina, C; Steinkamp, R; Thiele, F; Willershäuser, M; Zeh, R; Adamski, J; Busch, D H; Beckers, J; Behrendt, H; Daniel, H; Esposito, I; Favor, J; Graw, J; Heldmaier, G; Höfler, H; Ivandic, B; Katus, H; Klingenspor, M; Klopstock, T; Lengeling, A; Mempel, M; Müller, W; Neschen, S; Ollert, M; Quintanilla-Martinez, L; Rosenstiel, P; Schmidt, J; Schreiber, S; Schughart, K; Schulz, H; Wolf, E; Wurst, W; Zimmer, A; Hrabé de Angelis, M

    2009-02-01

    The German Mouse Clinic (GMC) is a large scale phenotyping center where mouse mutant lines are analyzed in a standardized and comprehensive way. The result is an almost complete picture of the phenotype of a mouse mutant line--a systemic view. At the GMC, expert scientists from various fields of mouse research work in close cooperation with clinicians side by side at one location. The phenotype screens comprise the following areas: allergy, behavior, clinical chemistry, cardiovascular analyses, dysmorphology, bone and cartilage, energy metabolism, eye and vision, host-pathogen interactions, immunology, lung function, molecular phenotyping, neurology, nociception, steroid metabolism, and pathology. The German Mouse Clinic is an open access platform that offers a collaboration-based phenotyping to the scientific community (www.mouseclinic.de). More than 80 mutant lines have been analyzed in a primary screen for 320 parameters, and for 95% of the mutant lines we have found new or additional phenotypes that were not associated with the mouse line before. Our data contributed to the association of mutant mouse lines to the corresponding human disease. In addition, the systemic phenotype analysis accounts for pleiotropic gene functions and refines previous phenotypic characterizations. This is an important basis for the analysis of underlying disease mechanisms. We are currently setting up a platform that will include environmental challenge tests to decipher genome-environmental interactions in the areas nutrition, exercise, air, stress and infection with different standardized experiments. This will help us to identify genetic predispositions as susceptibility factors for environmental influences.

  12. Early Warning System for reducing disaster risk: the technological platform DEWETRA for the Republic of Serbia

    Science.gov (United States)

    Massabo, Marco; Molini, Luca; Kostic, Bojan; Campanella, Paolo; Stevanovic, Slavimir

    2015-04-01

    Disaster risk reduction has long been recognized for its role in mitigating the negative environmental, social and economic impacts of natural hazards. Flood Early Warning System is a disaster risk reduction measure based on the capacities of institutions to observe and predict extreme hydro-meteorological events and to disseminate timely and meaningful warning information; it is furthermore based on the capacities of individuals, communities and organizations to prepare and to act appropriately and in sufficient time to reduce the possibility of harm or loss. An operational definition of an Early Warning System has been suggested by ISDR - UN Office for DRR [15 January 2009]: "EWS is the set of capacities needed to generate and disseminate timely and meaningful warning information to enable individuals, communities and organizations threatened by a hazard to prepare and to act appropriately and in sufficient time to reduce the possibility of harm or loss.". ISDR continues by commenting that a people-centered early warning system necessarily comprises four key elements: 1-knowledge of the risks; 2-monitoring, analysis and forecasting of the hazards; 3-communication or dissemination of alerts and warnings; and 4- local capabilities to respond to the warnings received." The technological platform DEWETRA supports the strengthening of the first three key elements of EWS suggested by ISDR definition, hence to improve the capacities to build real-time risk scenarios and to inform and warn the population in advance The technological platform DEWETRA has been implemented for the Republic of Serbia. DEWETRA is a real time-integrate system that supports decision makers for risk forecasting and monitoring and for distributing warnings to end-user and to the general public. The system is based on the rapid availability of different data that helps to establish up-to-date and reliable risk scenarios. The integration of all relevant data for risk management significantly

  13. A Novel System for Correction of Relative Angular Displacement between Airborne Platform and UAV in Target Localization

    Directory of Open Access Journals (Sweden)

    Chenglong Liu

    2017-03-01

    Full Text Available This paper provides a system and method for correction of relative angular displacements between an Unmanned Aerial Vehicle (UAV and its onboard strap-down photoelectric platform to improve localization accuracy. Because the angular displacements have an influence on the final accuracy, by attaching a measuring system to the platform, the texture image of platform base bulkhead can be collected in a real-time manner. Through the image registration, the displacement vector of the platform relative to its bulkhead can be calculated to further determine angular displacements. After being decomposed and superposed on the three attitude angles of the UAV, the angular displacements can reduce the coordinate transformation errors and thus improve the localization accuracy. Even a simple kind of method can improve the localization accuracy by 14.3%.

  14. A Novel System for Correction of Relative Angular Displacement between Airborne Platform and UAV in Target Localization.

    Science.gov (United States)

    Liu, Chenglong; Liu, Jinghong; Song, Yueming; Liang, Huaidan

    2017-03-04

    This paper provides a system and method for correction of relative angular displacements between an Unmanned Aerial Vehicle (UAV) and its onboard strap-down photoelectric platform to improve localization accuracy. Because the angular displacements have an influence on the final accuracy, by attaching a measuring system to the platform, the texture image of platform base bulkhead can be collected in a real-time manner. Through the image registration, the displacement vector of the platform relative to its bulkhead can be calculated to further determine angular displacements. After being decomposed and superposed on the three attitude angles of the UAV, the angular displacements can reduce the coordinate transformation errors and thus improve the localization accuracy. Even a simple kind of method can improve the localization accuracy by 14.3%.

  15. A Novel System for Correction of Relative Angular Displacement between Airborne Platform and UAV in Target Localization

    Science.gov (United States)

    Liu, Chenglong; Liu, Jinghong; Song, Yueming; Liang, Huaidan

    2017-01-01

    This paper provides a system and method for correction of relative angular displacements between an Unmanned Aerial Vehicle (UAV) and its onboard strap-down photoelectric platform to improve localization accuracy. Because the angular displacements have an influence on the final accuracy, by attaching a measuring system to the platform, the texture image of platform base bulkhead can be collected in a real-time manner. Through the image registration, the displacement vector of the platform relative to its bulkhead can be calculated to further determine angular displacements. After being decomposed and superposed on the three attitude angles of the UAV, the angular displacements can reduce the coordinate transformation errors and thus improve the localization accuracy. Even a simple kind of method can improve the localization accuracy by 14.3%. PMID:28273845

  16. Beyond xMOOCs in healthcare education: study of the feasibility in integrating virtual patient systems and MOOC platforms.

    Science.gov (United States)

    Stathakarou, Natalia; Zary, Nabil; Kononowicz, Andrzej A

    2014-01-01

    Background. Massive Open Online Courses (MOOCs) are an emerging trend in online learning. However, their technology is not yet completely adjusted to the needs of healthcare education. Integration of Virtual Patients within MOOCs to increase interactivity and foster clinical reasoning skills training, has been discussed in the past, but not verified by a practical implementation. Objective. To investigate the technical feasibility of integrating MOOCs with Virtual Patients for the purpose of enabling further research into the potential pedagogical benefits of this approach. Methods. We selected OpenEdx and Open Labyrinth as representative constituents of a MOOC platform and Virtual Patient system integration. Based upon our prior experience we selected the most fundamental technical requirement to address. Grounded in the available literature we identified an e-learning standard to guide the integration. We attempted to demonstrate the feasibility of the integration by designing a "proof-of-concept" prototype. The resulting pilot implementation was subject of verification by two test cases. Results. A Single Sign-On mechanism connecting Open Labyrinth with OpenEdx and based on the IMS LTI standard was successfully implemented and verified. Conclusion. We investigated the technical perspective of integrating Virtual Patients with MOOCs. By addressing this crucial technical requirement we set a base for future research on the educational benefits of using virtual patients in MOOCs. This provides new opportunities for integrating specialized software in healthcare education at massive scale.

  17. SOSPO-SP: Secure Operation of Sustainable Power Systems Simulation Platform for Real-Time System State Evaluation and Control

    DEFF Research Database (Denmark)

    Morais, Hugo; Vancraeyveld, Pieter; Pedersen, Allan Henning Birger

    2014-01-01

    New challenges are arising in managing power systems as these systems become more complex due to the use of high levels of distributed generation, mainly based on renewable energy sources, and due to the competitive environment within the power sector. At the same time, the use of Phasor Measurem...... in a closed-loop, integrating new real-time assessment methods to provide useful information to operators in power system control centers and to develop new control methodologies that handle emergency situations and avoid power system blackouts....... Measurement Units (PMUs) provides more information and enables wide-area monitoring with accurate timing. One of the challenges in the near future is converting the high quantity and quality of information provided by PMUs into useful knowledge about operational state of a global system. The use of real......-time simulation in closed-loop is essential to develop and validate new real-time applications of wide-area PMU data. This paper presents a simulation platform developed within the research project Secure Operation of Sustainable Power Systems (SOSPO). The SOSPO simulation platform (SOSPO-SP) functions...

  18. A Concept for Zero-Alignment Micro Optical Systems

    Energy Technology Data Exchange (ETDEWEB)

    DESCOUR, MICHAEL R.; KOLOLUOMA,TERHO; LEVEY,RAVIV; RANTALA,JUHA T.; SHUL,RANDY J.; WARREN,MIAL E.; WILLISON,CHRISTI LEE

    1999-09-16

    We are developing a method of constructing compact, three-dimensional photonics systems consisting of optical elements, e.g., lenses and mirrors, photo-detectors, and light sources, e.g., VCSELS or circular-grating lasers. These optical components, both active and passive, are mounted on a lithographically prepared silicon substrate. We refer to the substrate as a micro-optical table (MOT) in analogy with the macroscopic version routinely used in optics laboratories. The MOT is a zero-alignment, microscopic optical-system concept. The position of each optical element relative to other optical elements on the MOT is determined in the layout of the MOT photomask. Each optical element fits into a slot etched in the silicon MOT. The slots are etched using a high-aspect-ratio silicon etching (HARSE) process. Additional positioning features in each slot's cross-section and complementary features on each optical element permit accurate placement of that element's aperture relative to the MOT substrate. In this paper we present the results of the first fabrication and micro-assembly experiments of a silicon-wafer based MOT. Based on these experiments, estimates of position accuracy are reported. We also report on progress in fabrication of lens elements in a hybrid sol-gel material (HSGM). Diffractive optical elements have been patterned in a 13-micron thick HSGM layer on a 150-micron thick soda-lime glass substrate. The measured ms surface roughness was 20 nm. Finally, we describe modeling of MOT systems using non-sequential ray tracing (NSRT).

  19. Development of a Functional Platform for System Reliability Monitoring of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ming; Zhang, Zhijian; Yoshikawa, Hidekazu [Harbin Engineering University, Harbin (China)

    2014-08-15

    This paper presents MFM builder, a platform based on Multilevel Flow Modeling (MFM), which provides a graphical interface for modeling functions of complex artificial systems such as nuclear power plant with emphasizing the designed purposes of systems. Several algorithms based on MFM have been developed for dynamic system reliability analysis, fault diagnosis and quantitative software reliability analysis. A Reliability Monitoring System (RMS) of PWR nuclear power plant was developed by integrating above algorithms. Experiments by connecting RMS with a full scale PWR simulator showed that it took 16 seconds for RMS calculating the reliability changes over time of safety-related systems according to given system configurations in the 31 days by one computer run. The proposed reliability monitoring system can be used not only offline as a reliability analysis tool to assist the plant maintenance staffs in maintenance plan making, but also online as a operator support system to assist the operators in Main Control Room (MCR) in their various tasks such as configuration management, fault diagnosis and operational decision making.

  20. Design of Instant Messaging System of Multi-language E-commerce Platform

    Science.gov (United States)

    Yang, Heng; Chen, Xinyi; Li, Jiajia; Cao, Yaru

    2017-09-01

    This paper aims at researching the message system in the instant messaging system based on the multi-language e-commerce platform in order to design the instant messaging system in multi-language environment and exhibit the national characteristics based information as well as applying national languages to e-commerce. In order to develop beautiful and friendly system interface for the front end of the message system and reduce the development cost, the mature jQuery framework is adopted in this paper. The high-performance server Tomcat is adopted at the back end to process user requests, and MySQL database is adopted for data storage to persistently store user data, and meanwhile Oracle database is adopted as the message buffer for system optimization. Moreover, AJAX technology is adopted for the client to actively pull the newest data from the server at the specified time. In practical application, the system has strong reliability, good expansibility, short response time, high system throughput capacity and high user concurrency.