WorldWideScience

Sample records for platform management system

  1. Design and development of a device management platform for EAST cryogenic system

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhiwei, E-mail: zzw@ipp.ac.cn; Lu, Xiaofei, E-mail: xiaofeilu@ipp.ac.cn; Zhuang, Ming, E-mail: zhm@ipp.ac.cn; Hu, Liangbing, E-mail: huliangbing@ipp.ac.cn; Xia, Genhai, E-mail: xgh@ipp.ac.cn

    2014-05-15

    Highlights: • A device management platform for EAST cryogenic system based on DCS is designed. • This platform enhances the integrity and continuity of system device information. • It can help predictive maintenance and device management decision. - Abstract: EAST cryogenic system is one of the critical sub-systems of the EAST tokamak device. It is a large scale helium cryoplant, which adopts distributed control system to realize monitoring and control of the cryogenic process and devices. However, the maintenance and management of most field devices are still in the corrective maintenance or traditional preventive maintenance stage. Under maintained or over maintained problems widely exist, which could cause devices fault and increase operation costs. Therefore, a device management platform is proposed for a safe and steady operation as well as fault diagnosis and predictive maintenance of EAST cryogenic system. This paper presents the function design and architecture design of the cryogenic device management platform. This platform is developed based on DeltaV DCS and acquires monitoring data through OPC protocol. It consists of three pillars, namely device information management, device condition management, and device performance monitoring. The development and implementation of every pillar are illustrated in detail in this paper. Test results and discussions are presented in the end.

  2. Information Management Platform for Data Analytics and Aggregation (IMPALA) System Design Document

    Science.gov (United States)

    Carnell, Andrew; Akinyelu, Akinyele

    2016-01-01

    The System Design document tracks the design activities that are performed to guide the integration, installation, verification, and acceptance testing of the IMPALA Platform. The inputs to the design document are derived from the activities recorded in Tasks 1 through 6 of the Statement of Work (SOW), with the proposed technical solution being the completion of Phase 1-A. With the documentation of the architecture of the IMPALA Platform and the installation steps taken, the SDD will be a living document, capturing the details about capability enhancements and system improvements to the IMPALA Platform to provide users in development of accurate and precise analytical models. The IMPALA Platform infrastructure team, data architecture team, system integration team, security management team, project manager, NASA data scientists and users are the intended audience of this document. The IMPALA Platform is an assembly of commercial-off-the-shelf (COTS) products installed on an Apache-Hadoop platform. User interface details for the COTS products will be sourced from the COTS tools vendor documentation. The SDD is a focused explanation of the inputs, design steps, and projected outcomes of every design activity for the IMPALA Platform through installation and validation.

  3. Design and implementation of design content management platform

    International Nuclear Information System (INIS)

    Wang Yunfu; Zhang Jie

    2010-01-01

    Enterprise management is being transferred from a traditional database management to the content management with unstructured data management as the core. The content management is becoming part of enterprise information infrastructure and on the other hand, companies need a high-performance, high expansibility, able to support the rapid development of enterprise business and able to meet the changing needs of enterprise business content management platform. For a design institute, the document management system is developed based on Documentum software,and has been charged with documents with all the projects under construction and pre-project, project correspondence, records management, publishing management, library information management, authorization management,etc., and supply the services for the design and production systems. Based on the practical business applications, this paper sum up the architecture design and the gain and loss of the system design for the content management platform in design institute, analysis the supports relationship between the content management platform and other design and production systems, as well as the necessary for continuous improvement of work and finally propose the future development direction for' content management platform in the design institute. (authors)

  4. Multi-disease data management system platform for vector-borne diseases.

    Directory of Open Access Journals (Sweden)

    Lars Eisen

    2011-03-01

    Full Text Available Emerging information technologies present new opportunities to reduce the burden of malaria, dengue and other infectious diseases. For example, use of a data management system software package can help disease control programs to better manage and analyze their data, and thus enhances their ability to carry out continuous surveillance, monitor interventions and evaluate control program performance.We describe a novel multi-disease data management system platform (hereinafter referred to as the system with current capacity for dengue and malaria that supports data entry, storage and query. It also allows for production of maps and both standardized and customized reports. The system is comprised exclusively of software components that can be distributed without the user incurring licensing costs. It was designed to maximize the ability of the user to adapt the system to local conditions without involvement of software developers. Key points of system adaptability include 1 customizable functionality content by disease, 2 configurable roles and permissions, 3 customizable user interfaces and display labels and 4 configurable information trees including a geographical entity tree and a term tree. The system includes significant portions of functionality that is entirely or in large part re-used across diseases, which provides an economy of scope as new diseases downstream are added to the system at decreased cost.We have developed a system with great potential for aiding disease control programs in their task to reduce the burden of dengue and malaria, including the implementation of integrated vector management programs. Next steps include evaluations of operational implementations of the current system with capacity for dengue and malaria, and the inclusion in the system platform of other important vector-borne diseases.

  5. Access database application in medical treatment management platform

    International Nuclear Information System (INIS)

    Wu Qingming

    2014-01-01

    For timely, accurate and flexible access to medical expenses data, we applied Microsoft Access 2003 database management software, and we finished the establishment of a management platform for medical expenses. By developing management platform for medical expenses, overall hospital costs for medical expenses can be controlled to achieve a real-time monitoring of medical expenses. Using the Access database management platform for medical expenses not only changes the management model, but also promotes a sound management system for medical expenses. (authors)

  6. Design of the Hospital Integrated Information Management System Based on Cloud Platform.

    Science.gov (United States)

    Aijing, L; Jin, Y

    2015-12-01

    At present, the outdated information management style cannot meet the needs of hospital management, and has become the bottleneck of hospital's management and development. In order to improve the integrated management of information, hospitals have increased their investment in integrated information management systems. On account of the lack of reasonable and scientific design, some hospital integrated information management systems have common problems, such as unfriendly interface, poor portability and maintainability, low security and efficiency, lack of interactivity and information sharing. To solve the problem, this paper carries out the research and design of a hospital information management system based on cloud platform, which can realize the optimized integration of hospital information resources and save money.

  7. Flexible Communication Platform for Crisis Management

    OpenAIRE

    Jiří Barta; Tomáš Ludík; Jiří Urbánek

    2013-01-01

    Topics Disaster and Emergency Management are highly debated among experts. Fast communication will help to deal with emergencies. Problem is with the network connection and data exchange. The paper suggests a solution, which allows possibilities and perspectives of new flexible communication platform to the protection of communication systems for crisis management. This platform is used for everyday communication and communication in crisis situations too.

  8. 3D Viewer Platform of Cloud Clustering Management System: Google Map 3D

    Science.gov (United States)

    Choi, Sung-Ja; Lee, Gang-Soo

    The new management system of framework for cloud envrionemnt is needed by the platfrom of convergence according to computing environments of changes. A ISV and small business model is hard to adapt management system of platform which is offered from super business. This article suggest the clustering management system of cloud computing envirionments for ISV and a man of enterprise in small business model. It applies the 3D viewer adapt from map3D & earth of google. It is called 3DV_CCMS as expand the CCMS[1].

  9. SEEK: a systems biology data and model management platform.

    Science.gov (United States)

    Wolstencroft, Katherine; Owen, Stuart; Krebs, Olga; Nguyen, Quyen; Stanford, Natalie J; Golebiewski, Martin; Weidemann, Andreas; Bittkowski, Meik; An, Lihua; Shockley, David; Snoep, Jacky L; Mueller, Wolfgang; Goble, Carole

    2015-07-11

    Systems biology research typically involves the integration and analysis of heterogeneous data types in order to model and predict biological processes. Researchers therefore require tools and resources to facilitate the sharing and integration of data, and for linking of data to systems biology models. There are a large number of public repositories for storing biological data of a particular type, for example transcriptomics or proteomics, and there are several model repositories. However, this silo-type storage of data and models is not conducive to systems biology investigations. Interdependencies between multiple omics datasets and between datasets and models are essential. Researchers require an environment that will allow the management and sharing of heterogeneous data and models in the context of the experiments which created them. The SEEK is a suite of tools to support the management, sharing and exploration of data and models in systems biology. The SEEK platform provides an access-controlled, web-based environment for scientists to share and exchange data and models for day-to-day collaboration and for public dissemination. A plug-in architecture allows the linking of experiments, their protocols, data, models and results in a configurable system that is available 'off the shelf'. Tools to run model simulations, plot experimental data and assist with data annotation and standardisation combine to produce a collection of resources that support analysis as well as sharing. Underlying semantic web resources additionally extract and serve SEEK metadata in RDF (Resource Description Format). SEEK RDF enables rich semantic queries, both within SEEK and between related resources in the web of Linked Open Data. The SEEK platform has been adopted by many systems biology consortia across Europe. It is a data management environment that has a low barrier of uptake and provides rich resources for collaboration. This paper provides an update on the functions and

  10. GEOGRAPHIC INFORMATION SYSTEM AND REMOTE SENSING BASED DISASTER MANAGEMENT AND DECISION SUPPORT PLATFORM: AYDES

    OpenAIRE

    Keskin, İ.; Akbaba, N.; Tosun, M.; Tüfekçi, M. K.; Bulut, D.; Avcı, F.; Gökçe, O.

    2018-01-01

    The accelerated developments in information technology in recent years, increased the amount of usage of Geographic Information Systems (GIS) and Remote Sensing (RS) in disaster management considerably and the access from mobile and web-based platforms to continuous, accurate and sufficient data needed for decision-making became easier accordingly. The Disaster Management and Decision Support System (AYDES) has been developed with the purpose of managing the disaster and emergency manageme...

  11. Genome Modeling System: A Knowledge Management Platform for Genomics.

    Directory of Open Access Journals (Sweden)

    Malachi Griffith

    2015-07-01

    Full Text Available In this work, we present the Genome Modeling System (GMS, an analysis information management system capable of executing automated genome analysis pipelines at a massive scale. The GMS framework provides detailed tracking of samples and data coupled with reliable and repeatable analysis pipelines. The GMS also serves as a platform for bioinformatics development, allowing a large team to collaborate on data analysis, or an individual researcher to leverage the work of others effectively within its data management system. Rather than separating ad-hoc analysis from rigorous, reproducible pipelines, the GMS promotes systematic integration between the two. As a demonstration of the GMS, we performed an integrated analysis of whole genome, exome and transcriptome sequencing data from a breast cancer cell line (HCC1395 and matched lymphoblastoid line (HCC1395BL. These data are available for users to test the software, complete tutorials and develop novel GMS pipeline configurations. The GMS is available at https://github.com/genome/gms.

  12. Practice and exploration: build nuclear science and technology information resources management system based on the TRS platform

    International Nuclear Information System (INIS)

    Huang Jing; Meng Xu

    2010-01-01

    Nuclear science and technology information has played a very important role in the development of Chinese nuclear industry. In information explosion and information technology swift development's today, how to use information technology method to management and shared the nuclear information of nuclear research institutes, nuclear power plants and other nuclear-related units, become an important subject of nuclear information work. TRS information resource management platform provide a doable solution to manage and share the nuclear science and technology information. Nuclear Power Institute of China has built a nuclear science and technology information resources management system based on the TRS platform, through some steps just like system design, re-development and resource building. This management system has served for the research, testing, production and operation. (authors)

  13. Risk Management of P2P Internet Financing Service Platform

    Science.gov (United States)

    Yalei, Li

    2017-09-01

    Since 2005, the world’s first P2P Internet financing service platform Zopa in UK was introduced, in the development of “Internet +” trend, P2P Internet financing service platform has been developed rapidly. In 2007, China’s first P2P platform “filming loan” was established, marking the P2P Internet financing service platform to enter China and the rapid development. At the same time, China’s P2P Internet financing service platform also appeared in different forms of risk. This paper focuses on the analysis of the causes of risk of P2P Internet financing service platform and the performance of risk management process. It provides a solution to the Internet risk management plan, and explains the risk management system of the whole P2P Internet financing service platform and the future development direction.

  14. Cloud-Based Software Platform for Smart Meter Data Management

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Nielsen, Per Sieverts

    of the so-called big data possible. This can improve energy management, e.g., help utility companies to forecast energy loads and improve services, and help households to manage energy usage and save money. As this regard, the proposed paper focuses on building an innovative software platform for smart...... their knowledge; scalable data analytics platform for data mining over big data sets for energy demand forecasting and consumption discovering; data as the service for other applications using smart meter data; and a portal for visualizing data analytics results. The design will incorporate hybrid clouds......, including Infrastructure as a Service (IaaS) and Platform as a Service (PaaS), which are suitable for on-demand provisioning, massive scaling, and manageability. Besides, the design will impose extensibility, eciency, and high availability on the system. The paper will evaluate the system comprehensively...

  15. The construction of enterprise content management platform

    International Nuclear Information System (INIS)

    Liu Diyong

    2010-01-01

    The paper introduces the content management platform development background and the construction mode of Sanmen Nuclear Power Co., Ltd. It also proposes the system design architecture, especially focuses on the implementation of the project, the key technical issues and the project management experience. In addition, it describes how to classify, manage and use the unformatted information, digital assets and documents. (author)

  16. Platform development: implications for portfolio management

    DEFF Research Database (Denmark)

    Hsuan, Juliana; Hansen, Poul H. Kyvsgård

    2007-01-01

    " The challenge of implementing industrial platforms in practice can be described as a configuration problem caused by a considerable number of variables, which often have contradictory influences on the total performance of the firm. Consequently, the specific platform decisions become extremely...... complex, possibly increasing the strategic risks for the firm. This paper reports preliminary findings on platform management process at LEGO, a Danish toy company. Specifically, we report the process of applying games combined with simulations and workshops in the platform development. We also propose...... a framework, based on the portfolio management thinking to evaluate the degree of modularity embedded in a given platform and to which extent it is aligned with other platforms."...

  17. Small supermarket management system

    Institute of Scientific and Technical Information of China (English)

    曹正

    2016-01-01

    This system USES the Java language in the MyEclipse platform development tool, SQL2005 as the database platform for data and data, the SQL2005 required for the user operating system. It mainly implements the daily management of goods, including purchase management, inventory management, sales management, personnel management and supplier management. The system can also complete the functions of browsing, querying, adding, deleting and modifying relevant information. This topic is the core of the stock management, inventory management and sales management, at the same time, the system also has the full user management and permissions management function..

  18. Smart adaptable system for older adults' Daily Life Activities Management - The ABLE platform.

    Science.gov (United States)

    Giokas, Kostas; Anastasiou, Athanasios; Tsirmpas, Charalampos; Koutsouri, Georgia; Koutsouris, Dimitris; Iliopoulou, Dimitra

    2014-01-01

    In this paper we propose a system (ABLE) that will act as the main platform for a number of low-cost, mature technologies that will be integrated in order to create a dynamically adaptive Daily Life Activities Management environment in order to facilitate the everyday life of senior (but not exclusively) citizens at home. While the main target group of ABLE's users is the ageing population its use can be extended to all people that are vulnerable or atypical in body, intellect or emotions and are categorized by society as disabled. The classes of assistive products that are well defined in the international standard, ISO9999 such as assistive products for personal medical treatment, personal care and protection, communication, information and reaction and for personal mobility, will be easily incorporated in our proposed platform. Furthermore, our platform could integrate and implement the above classes under several service models that will be analyzed further.

  19. Migration of the Almaraz NPP integrated operation management system to a new computer platform

    International Nuclear Information System (INIS)

    Gonzalez Crego, E.; Martin Lopez-Suevos, C.

    1996-01-01

    In all power plants, it becomes necessary, with the passage of time, to migrate the initial operation management systems to adapt them to current technologies. That is a good time to improve the inclusion of data in the corporative database and standardize the system interfaces and operation, whilst maintaining data system operability. This article contains Almaraz experience in migrating its Integrated Operation Management System to an advanced computer platform based on open systems (UNIX), communications network (ETHERNET) and database (ORACLE). To this effect, clear objectives and strict standards were established to facilitate the work. The most noteworthy results obtained are: Better quality of information and structure in the corporative database Standardised user interface in all applications. Joint migration of applications for Maintenance, Components and Spare parts, Warehouses and Purchases. Integration of new applications into the system. Introduction of the navigator, which allows movement around the database using all available applications. (Author)

  20. Securing a Home Energy Managing Platform

    DEFF Research Database (Denmark)

    Mikkelsen, Søren Aagaard; Jacobsen, Rune Hylsberg

    2016-01-01

    Energy management in households gets increasingly more attention in the struggle to integrate more sustainable energy sources. Especially in the electrical system, smart grid towards a better utilisation of the energy production and distribution infrastructure. The Home Energy Management System...... (HEMS) is a critical infrastructure component in this endeavour. Its main goal is to enable energy services utilising smart devices in the households based on the interest of the residential consumers and external actors. With the role of being both an essential link in the communication infrastructure...... for balancing the electrical grid and a surveillance unit in private homes, security and privacy become essential to address. In this chapter, we identify and address potential threats Home Energy Management Platform (HEMP) developers should consider in the progress of designing architecture, selecting hardware...

  1. Work flow management systems. Selection of Platforms and tools

    International Nuclear Information System (INIS)

    Munoz Garcia, M.

    1997-01-01

    This paper addresses a formal procedure for selecting the Platform and tools necessary to implement a Work Flow system in a company's organisation. The proposed method is based on a preliminary study to ascertain the company's requirements; in other words, the tool is selected on the basis of the environment in which it is to be used, thus making it essential to know the frequency of use, the types of tasks to be executed, the complexity of work flow, etc. Once the preliminary study has been performed, the formal selection method does no differ greatly from that for selecting any other tool. The objective is to establish a series of weighted parameters so that each candidate configuration can be assessed and one finally selected. Lastly, the paper discusses some practical considerations which became evident during the selection of a work flow management tool for our own company. (Author)

  2. wayGoo: a platform for geolocating and managing indoor and outdoor spaces

    Science.gov (United States)

    Thomopoulos, Stelios C. A.; Karafylli, Christina; Karafylli, Maria; Motos, Dionysis; Lampropoulos, Vassilis; Dimitros, Kostantinos; Margonis, Christos

    2016-05-01

    wayGoo2 is a platform for Geolocating and Managing indoor and outdoor spaces and content with multidimensional indoor and outdoor Navigation and Guidance. Its main components are a Geographic Information System, a back-end server, front-end applications and a web-based Content Management System (CMS). It constitutes a fully integrated 2D/3D space and content management system that creates a repository that consists of a database, content components and administrative data. wayGoo can connect to any third party database and event management data-source. The platform is secure as the data is only available through a Restful web service using https security protocol in conjunction with an API key used for authentication. To enhance users experience, wayGoo makes the content available by extracting components out of the repository and constructing targeted applications. The wayGoo platform supports geo-referencing of indoor and outdoor information and use of metadata. It also allows the use of existing information such as maps and databases. The platform enables planning through integration of content that is connected either spatially, temporally or contextually, and provides immediate access to all spatial data through interfaces and interactive 2D and 3D representations. wayGoo constitutes a mean to document and preserve assets through computerized techniques and provides a system that enhances the protection of your space, people and guests when combined with wayGoo notification and alert system. It constitutes a strong marketing tool providing staff and visitors with an immersive tool for navigation in indoor spaces and allowing users to organize their agenda and to discover events through wayGoo event scheduler and recommendation system. Furthermore, the wayGoo platform can be used in Security applications and event management, e.g. CBRNE incidents, man-made and natural disasters, etc., to document and geolocate information and sensor data (off line and real time

  3. The Information Management Platform on Nuclear Emergency Resources of China

    International Nuclear Information System (INIS)

    Dong, L.

    2016-01-01

    Full text: The Chinese government has always attached great importance to nuclear emergency work, and has invested to form lots of nuclear emergency resources. Meanwhile, there also exist some management problems such as repeated investment, fragmented inventory list, inefficient management, etc. To achieve integrated management on the nuclear emergency resources of China, the Chinese government initiated the project “The Information Management Platform on Nuclear Emergency Resources of China”. The goal of the project is to support a timely, managed, controlled, coordinated and effective response while the resources managing process remains economically efficient. The project team firstly completed the nuclear emergency resources classification and encoding. Based on these, the nuclear emergency resources information management software system was developed. The pilot operation in the system was carried out both in Guangxi and Liaoning Province at the same time. Nuclear emergency resources survey was done as the relevant information was put into the database in these regions. The evaluation result on the pilot operation showed that, the information management platform on emergency resources would apparently improve efficiency of nuclear emergency preparedness and response, and it also would increase economical efficiency on inventory list, information management and invest decision. (author

  4. CILogon: An Integrated Identity and Access Management Platform for Science

    Science.gov (United States)

    Basney, J.

    2016-12-01

    When scientists work together, they use web sites and other software to share their ideas and data. To ensure the integrity of their work, these systems require the scientists to log in and verify that they are part of the team working on a particular science problem. Too often, the identity and access verification process is a stumbling block for the scientists. Scientific research projects are forced to invest time and effort into developing and supporting Identity and Access Management (IAM) services, distracting them from the core goals of their research collaboration. CILogon provides an IAM platform that enables scientists to work together to meet their IAM needs more effectively so they can allocate more time and effort to their core mission of scientific research. The CILogon platform enables federated identity management and collaborative organization management. Federated identity management enables researchers to use their home organization identities to access cyberinfrastructure, rather than requiring yet another username and password to log on. Collaborative organization management enables research projects to define user groups for authorization to collaboration platforms (e.g., wikis, mailing lists, and domain applications). CILogon's IAM platform serves the unique needs of research collaborations, namely the need to dynamically form collaboration groups across organizations and countries, sharing access to data, instruments, compute clusters, and other resources to enable scientific discovery. CILogon provides a software-as-a-service platform to ease integration with cyberinfrastructure, while making all software components publicly available under open source licenses to enable re-use. Figure 1 illustrates the components and interfaces of this platform. CILogon has been operational since 2010 and has been used by over 7,000 researchers from more than 170 identity providers to access cyberinfrastructure including Globus, LIGO, Open Science Grid

  5. Initial Study of An Effective Fast-Time Simulation Platform for Unmanned Aircraft System Traffic Management

    Science.gov (United States)

    Xue, Min; Rios, Joseph

    2017-01-01

    Small Unmanned Aerial Vehicles (sUAVs), typically 55 lbs and below, are envisioned to play a major role in surveilling critical assets, collecting important information, and delivering goods. Large scale small UAV operations are expected to happen in low altitude airspace in the near future. Many static and dynamic constraints exist in low altitude airspace because of manned aircraft or helicopter activities, various wind conditions, restricted airspace, terrain and man-made buildings, and conflict-avoidance among sUAVs. High sensitivity and high maneuverability are unique characteristics of sUAVs that bring challenges to effective system evaluations and mandate such a simulation platform different from existing simulations that were built for manned air traffic system and large unmanned fixed aircraft. NASA's Unmanned aircraft system Traffic Management (UTM) research initiative focuses on enabling safe and efficient sUAV operations in the future. In order to help define requirements and policies for a safe and efficient UTM system to accommodate a large amount of sUAV operations, it is necessary to develop a fast-time simulation platform that can effectively evaluate requirements, policies, and concepts in a close-to-reality environment. This work analyzed the impacts of some key factors including aforementioned sUAV's characteristics and demonstrated the importance of these factors in a successful UTM fast-time simulation platform.

  6. CEFR information management system solution

    International Nuclear Information System (INIS)

    Lu Fei; Zhao Jia'ning

    2011-01-01

    Based on finished information resources planning scheme for China sodium cooled experimental fast breeder reactor and the advanced information resources management solution concepts were applied, we got the building solution of CEFR information management systems. At the same time, the technical solutions of systems structures, logic structures, physical structures, development platforms and operation platforms for information resources management system in fast breeder reactors were developed, which provided programmatic introductions for development works in future. (authors)

  7. Real-time GIS data model and sensor web service platform for environmental data management.

    Science.gov (United States)

    Gong, Jianya; Geng, Jing; Chen, Zeqiang

    2015-01-09

    Effective environmental data management is meaningful for human health. In the past, environmental data management involved developing a specific environmental data management system, but this method often lacks real-time data retrieving and sharing/interoperating capability. With the development of information technology, a Geospatial Service Web method is proposed that can be employed for environmental data management. The purpose of this study is to determine a method to realize environmental data management under the Geospatial Service Web framework. A real-time GIS (Geographic Information System) data model and a Sensor Web service platform to realize environmental data management under the Geospatial Service Web framework are proposed in this study. The real-time GIS data model manages real-time data. The Sensor Web service platform is applied to support the realization of the real-time GIS data model based on the Sensor Web technologies. To support the realization of the proposed real-time GIS data model, a Sensor Web service platform is implemented. Real-time environmental data, such as meteorological data, air quality data, soil moisture data, soil temperature data, and landslide data, are managed in the Sensor Web service platform. In addition, two use cases of real-time air quality monitoring and real-time soil moisture monitoring based on the real-time GIS data model in the Sensor Web service platform are realized and demonstrated. The total time efficiency of the two experiments is 3.7 s and 9.2 s. The experimental results show that the method integrating real-time GIS data model and Sensor Web Service Platform is an effective way to manage environmental data under the Geospatial Service Web framework.

  8. The Platform Architecture and Key Technology of Cloud Service that Support Wisdom City Management

    Directory of Open Access Journals (Sweden)

    Liang Xiao

    2013-05-01

    Full Text Available According to the new requirement of constructing “resource sharing and service on demand” wisdom city system, this paper put forward the platform architecture of cloud service for wisdom city management which support IaaS, PaaS and SaaS three types of service model on the basis of researching the operation mode of the wisdom city which under cloud computing environment and through the research of mass storing technology of cloud data, building technology of cloud resource pool, scheduling management methods and monitoring technology of cloud resource, security management and control technology of cloud platform and other key technologies. The platform supports wisdom city system to achieve business or resource scheduling management optimization and the unified and efficient management of large-scale hardware and software, which has the characteristics of cross-domain resource scheduling, cross-domain data sharing, cross-domain facilities integration and cross-domain service integration.

  9. An online app platform enhances collaborative medical student group learning and classroom management.

    Science.gov (United States)

    Peacock, Justin G; Grande, Joseph P

    2016-01-01

    The authors presented their results in effectively using a free and widely-accessible online app platform to manage and teach a first-year pathology course at Mayo Medical School. The authors utilized the Google "Blogger", "Forms", "Flubaroo", "Sheets", "Docs", and "Slides" apps to effectively build a collaborative classroom teaching and management system. Students were surveyed on the use of the app platform in the classroom, and 44 (94%) students responded. Thirty-two (73%) of the students reported that "Blogger" was an effective place for online discussion of pathology topics and questions. 43 (98%) of the students reported that the "Forms/Flubaroo" grade-reporting system was helpful. 40 (91%) of the students used the remote, collaborative features of "Slides" to create team-based learning presentations, and 39 (89%) of the students found those collaborative features helpful. "Docs" helped teaching assistants to collaboratively create study guides or grading rubrics. Overall, 41 (93%) of the students found that the app platform was helpful in establishing a collaborative, online classroom environment. The online app platform allowed faculty to build an efficient and effective classroom teaching and management system. The ease of accessibility and opportunity for collaboration allowed for collaborative learning, grading, and teaching.

  10. A layered and distributed approach to platform systems control

    NARCIS (Netherlands)

    Neef, R.M.; Lieburg, A. van; Gosliga, S.P. van; Gillis, M.P.W.

    2003-01-01

    With the increasing complexity of platform systems and the ongoing demand for reduced manning comes the need for novel approaches to ship control systems. Current control and management systems fall short on maintainability, robustness and scalability. From the operator's perspective information

  11. Energy Consumption Management of Virtual Cloud Computing Platform

    Science.gov (United States)

    Li, Lin

    2017-11-01

    For energy consumption management research on virtual cloud computing platforms, energy consumption management of virtual computers and cloud computing platform should be understood deeper. Only in this way can problems faced by energy consumption management be solved. In solving problems, the key to solutions points to data centers with high energy consumption, so people are in great need to use a new scientific technique. Virtualization technology and cloud computing have become powerful tools in people’s real life, work and production because they have strong strength and many advantages. Virtualization technology and cloud computing now is in a rapid developing trend. It has very high resource utilization rate. In this way, the presence of virtualization and cloud computing technologies is very necessary in the constantly developing information age. This paper has summarized, explained and further analyzed energy consumption management questions of the virtual cloud computing platform. It eventually gives people a clearer understanding of energy consumption management of virtual cloud computing platform and brings more help to various aspects of people’s live, work and son on.

  12. How to Support the Integrate Management System through an Enterprise Content Management Platform?

    International Nuclear Information System (INIS)

    Couvreur, D.

    2016-01-01

    Full text: In 2010 the Belgian Nuclear Research Centre SCK-CEN decided to implement an ECM platform in order to manage its information. The main objectives were to centralize in one place all the right and latest versions of information, to improve the usage of internal information and to enhance the efficiency of our activities by standardization and by supporting document management processes. A programme of document migration for the whole institute was set up per group, running over four years. Steps were foreseen such as the comprehension of the activities of the end users in order to increase their efficiency, the analysis of type of documentation, the technical aspects, the migration of documents itself, the training and the most important steps—communication and supporting people to change. In 2013 SCK-CEN decided to implement an Integrated Management System. The objectives were i) to improve the safety performance of the organisation, ii) to foster, strengthen and support a strong safety and organizational culture through the development and reinforcement of good safety attitudes and behaviour in individuals and teams, iii) to structure, but at the same time simplify and make more transparent all processes of SCK-CEN clearly defining responsibilities and authorities, iv) to automate these processes by workflows and support the information and data flow by relevant databases. Intrinsically, both initiatives have the same end objective being the safety of the installations, of the knowledge and transfer of know-how on processes and projects related to radiation protection, reactor technology, waste and disposal, dismantling. In this paper, we will explain through examples. (author

  13. Which recommender system can best fit social learning platforms?

    NARCIS (Netherlands)

    Fazeli, Soude; Loni, Babak; Drachsler, Hendrik; Sloep, Peter

    2014-01-01

    In this presentation, we present a study that aims to develop a recommender system for social learning platforms that combine traditional learning management systems with commercial social networks like Facebook. We therefore take into account social interactions of users to make recommendations on

  14. Which Recommender System Can Best Fit Social Learning Platforms?

    NARCIS (Netherlands)

    Fazeli, Soude; Loni, Babak; Drachsler, Hendrik; Sloep, Peter

    2014-01-01

    This study aims to develop a recommender system for social learning platforms that combine traditional learning management systems with commercial social networks like Facebook. We therefore take into account social interactions of users to make recommendations on learning resources. We propose to

  15. An Embedded Software Platform for Distributed Automotive Environment Management

    Directory of Open Access Journals (Sweden)

    Seepold Ralf

    2009-01-01

    Full Text Available This paper discusses an innovative extension of the actual vehicle platforms that integrate intelligent environments in order to carry out e-safety tasks improving the driving security. These platforms are dedicated to automotive environments which are characterized by sensor networks deployed along the vehicles. Since this kind of platform infrastructure is hardly extensible and forms a non-scalable process unit, an embedded OSGi-based UPnP platform extension is proposed in this article. Such extension deploys a compatible and scalable uniform environment that allows to manage the vehicle components heterogeneity and to provide plug and play support, being compatible with all kind of devices and sensors located in a car network. Furthermore, such extension allows to autoregister any kind of external devices, wherever they are located, providing the in-vehicle system with additional services and data supplied by them. This extension also supports service provisioning and connections to external and remote network services using SIP technology.

  16. Trust Management System for Opportunistic Cloud Services

    DEFF Research Database (Denmark)

    Kuada, Eric

    2013-01-01

    We have over the past three years been working on the feasibility of Opportunistic Cloud Services (OCS) for enterprises. OCS is about enterprises strategically contributing and utilizing spare IT resources as cloud services. One of the major challenges that such a platform faces is data security...... and trust management issues. This paper presents a trust management system for OCS platforms. It models the concept of trust and applies it to OCS platforms. The trust model and the trust management system are verified through the simulation of the computation of the trust values with Infrastructure...

  17. PD_Manager: an mHealth platform for Parkinson's disease patient management.

    Science.gov (United States)

    Tsiouris, Kostas M; Gatsios, Dimitrios; Rigas, George; Miljkovic, Dragana; Koroušić Seljak, Barbara; Bohanec, Marko; Arredondo, Maria T; Antonini, Angelo; Konitsiotis, Spyros; Koutsouris, Dimitrios D; Fotiadis, Dimitrios I

    2017-06-01

    PD_Manager is a mobile health platform designed to cover most of the aspects regarding the management of Parkinson's disease (PD) in a holistic approach. Patients are unobtrusively monitored using commercial wrist and insole sensors paired with a smartphone, to automatically estimate the severity of most of the PD motor symptoms. Besides motor symptoms monitoring, the patient's mobile application also provides various non-motor self-evaluation tests for assessing cognition, mood and nutrition to motivate them in becoming more active in managing their disease. All data from the mobile application and the sensors is transferred to a cloud infrastructure to allow easy access for clinicians and further processing. Clinicians can access this information using a separate mobile application that is specifically designed for their respective needs to provide faster and more accurate assessment of PD symptoms that facilitate patient evaluation. Machine learning techniques are used to estimate symptoms and disease progression trends to further enhance the provided information. The platform is also complemented with a decision support system (DSS) that notifies clinicians for the detection of new symptoms or the worsening of existing ones. As patient's symptoms are progressing, the DSS can also provide specific suggestions regarding appropriate medication changes.

  18. Design and Implementation of English Reading Examination System Based on WEB Platform

    Directory of Open Access Journals (Sweden)

    Lan Guo

    2017-12-01

    Full Text Available For the self-assessment and practice-based improvement of students' English reading level, this paper designed an English reading test system based on the WEB platform, which will enrich the methods for students to improve their reading ability and will advance the informatization level of English tests. The system adopts the browser / server architecture with the back-end database SQL Server as the database management system and C # and ASP.NET as the programming language to meet multiple needs of English reading examinations and achieve the informatization management of English reading examinations. The design and implementation of the English reading examination system based on the WEB platform will not only improve the efficiency of the examination management, but also drive students to actively learn English reading, with certain application value.

  19. Prototype of a web - based participative decision support platform in natural hazards and risk management

    NARCIS (Netherlands)

    Aye, Z.C.; Jaboyedoff, M.; Derron, M.H.; van Westen, C.J.

    2015-01-01

    This paper presents the current state and development of a prototype web-GIS (Geographic Information System) decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and

  20. Service platforms management strategy: case study of an interior design firm

    Directory of Open Access Journals (Sweden)

    Leonel Del Rey de Melo Filho

    2015-03-01

    Full Text Available Platform management is a strategic tool for firms of various sizes, although it demands studies in the service sector. The aim of this paper is to investigate a use of platform management, designed to reach flexibility and operational dynamics in service projects. The studied platform is evaluated as a strategic resource in a particular case. The contributions of the service platform were explored from Resource-Based View (RBV and Service Marketing (SM perspectives, to study their effects on firms’ performance. The research strategy used was an exploratory case study in an interior design firm. The data collection techniques included a participant observation, document analysis and a focus group with firm managers. The research demonstrated that platform management is a strategic resource that assists with the planning of internal capabilities, market positioning, and provides better customer service.

  1. Offshore Minerals Management Platforms for the Gulf of Mexico (GOM), Geographic NAD83, MMS (2006) [platforms_mms_2006

    Data.gov (United States)

    Louisiana Geographic Information Center — Offshore Minerals Management Platforms for the Gulf of Mexico (GOM). Identifies the location of platforms in GOM. All platforms existing in the database are included.

  2. Geospatial Data Management Platform for Urban Groundwater

    Science.gov (United States)

    Gaitanaru, D.; Priceputu, A.; Gogu, C. R.

    2012-04-01

    Due to the large amount of civil work projects and research studies, large quantities of geo-data are produced for the urban environments. These data are usually redundant as well as they are spread in different institutions or private companies. Time consuming operations like data processing and information harmonisation represents the main reason to systematically avoid the re-use of data. The urban groundwater data shows the same complex situation. The underground structures (subway lines, deep foundations, underground parkings, and others), the urban facility networks (sewer systems, water supply networks, heating conduits, etc), the drainage systems, the surface water works and many others modify continuously. As consequence, their influence on groundwater changes systematically. However, these activities provide a large quantity of data, aquifers modelling and then behaviour prediction can be done using monitored quantitative and qualitative parameters. Due to the rapid evolution of technology in the past few years, transferring large amounts of information through internet has now become a feasible solution for sharing geoscience data. Furthermore, standard platform-independent means to do this have been developed (specific mark-up languages like: GML, GeoSciML, WaterML, GWML, CityML). They allow easily large geospatial databases updating and sharing through internet, even between different companies or between research centres that do not necessarily use the same database structures. For Bucharest City (Romania) an integrated platform for groundwater geospatial data management is developed under the framework of a national research project - "Sedimentary media modeling platform for groundwater management in urban areas" (SIMPA) financed by the National Authority for Scientific Research of Romania. The platform architecture is based on three components: a geospatial database, a desktop application (a complex set of hydrogeological and geological analysis

  3. Digital Platforms as Factor Transforming Management Models in Businesses and Industries

    Science.gov (United States)

    Dimitrakiev, D.; Molodchik, A. V.

    2018-05-01

    Increasingly, digital platforms are built into the value chain, acting as an intermediary between the manufacturer and the consumer. The paper presents tendencies and features of business model transformation in connection with management of the new digital technologies. The limitations of traditional business models and the capabilities of business models based on digital platforms and self-organization were revealed. In the study, the viability of the new business model for the dental industry was confirmed and the new concept of the branch self-organizing control system based on the information platform, blockchain, cryptocurrency and reward of target consumer is offered, including mechanisms that make the model attractive for both the consumer and the service provider.

  4. THE DESIGN OF A HIGH PERFORMANCE EARTH IMAGERY AND RASTER DATA MANAGEMENT AND PROCESSING PLATFORM

    Directory of Open Access Journals (Sweden)

    Q. Xie

    2016-06-01

    Full Text Available This paper summarizes the general requirements and specific characteristics of both geospatial raster database management system and raster data processing platform from a domain-specific perspective as well as from a computing point of view. It also discusses the need of tight integration between the database system and the processing system. These requirements resulted in Oracle Spatial GeoRaster, a global scale and high performance earth imagery and raster data management and processing platform. The rationale, design, implementation, and benefits of Oracle Spatial GeoRaster are described. Basically, as a database management system, GeoRaster defines an integrated raster data model, supports image compression, data manipulation, general and spatial indices, content and context based queries and updates, versioning, concurrency, security, replication, standby, backup and recovery, multitenancy, and ETL. It provides high scalability using computer and storage clustering. As a raster data processing platform, GeoRaster provides basic operations, image processing, raster analytics, and data distribution featuring high performance computing (HPC. Specifically, HPC features include locality computing, concurrent processing, parallel processing, and in-memory computing. In addition, the APIs and the plug-in architecture are discussed.

  5. The Design of a High Performance Earth Imagery and Raster Data Management and Processing Platform

    Science.gov (United States)

    Xie, Qingyun

    2016-06-01

    This paper summarizes the general requirements and specific characteristics of both geospatial raster database management system and raster data processing platform from a domain-specific perspective as well as from a computing point of view. It also discusses the need of tight integration between the database system and the processing system. These requirements resulted in Oracle Spatial GeoRaster, a global scale and high performance earth imagery and raster data management and processing platform. The rationale, design, implementation, and benefits of Oracle Spatial GeoRaster are described. Basically, as a database management system, GeoRaster defines an integrated raster data model, supports image compression, data manipulation, general and spatial indices, content and context based queries and updates, versioning, concurrency, security, replication, standby, backup and recovery, multitenancy, and ETL. It provides high scalability using computer and storage clustering. As a raster data processing platform, GeoRaster provides basic operations, image processing, raster analytics, and data distribution featuring high performance computing (HPC). Specifically, HPC features include locality computing, concurrent processing, parallel processing, and in-memory computing. In addition, the APIs and the plug-in architecture are discussed.

  6. Prototype of a Web-based Participative Decision Support Platform in Natural Hazards and Risk Management

    Directory of Open Access Journals (Sweden)

    Zar Chi Aye

    2015-07-01

    Full Text Available This paper presents the current state and development of a prototype web-GIS (Geographic Information System decision support platform intended for application in natural hazards and risk management, mainly for floods and landslides. This web platform uses open-source geospatial software and technologies, particularly the Boundless (formerly OpenGeo framework and its client side software development kit (SDK. The main purpose of the platform is to assist the experts and stakeholders in the decision-making process for evaluation and selection of different risk management strategies through an interactive participation approach, integrating web-GIS interface with decision support tool based on a compromise programming approach. The access rights and functionality of the platform are varied depending on the roles and responsibilities of stakeholders in managing the risk. The application of the prototype platform is demonstrated based on an example case study site: Malborghetto Valbruna municipality of North-Eastern Italy where flash floods and landslides are frequent with major events having occurred in 2003. The preliminary feedback collected from the stakeholders in the region is discussed to understand the perspectives of stakeholders on the proposed prototype platform.

  7. Prototype development of a web-based participative decision support platform in risk management

    Science.gov (United States)

    Aye, Zar Chi; Olyazadeh, Roya; Jaboyedoff, Michel; Derron, Marc-Henri

    2014-05-01

    This paper discusses the proposed background architecture and prototype development of an internet-based decision support system (DSS) in the field of natural hazards and risk management using open-source geospatial software and web technologies. It is based on a three-tier, client-server architecture with the support of boundless (opengeo) framework and its client side SDK application environment using customized gxp components and data utility classes. The main purpose of the system is to integrate the workflow of risk management systematically with the diverse involvement of stakeholders from different organizations dealing with natural hazards and risk for evaluation of management measures through the active online participation approach. It aims to develop an adaptive user friendly, web-based environment that allows the users to set up risk management strategies based on actual context and data by integrating web-GIS and DSS functionality associated with process flow and other visualization tools. Web-GIS interface has been integrated within the DSS to deliver maps and provide certain geo-processing capabilities on the web, which can be easily accessible and shared by different organizations located in case study sites of the project. This platform could be envisaged not only as a common web-based platform for the centralized sharing of data such as hazard maps, elements at risk maps and additional information but also to ensure an integrated platform of risk management where the users could upload data, analyze risk and identify possible alternative scenarios for risk reduction especially for floods and landslides, either quantitatively or qualitatively depending on the risk information provided by the stakeholders in case study regions. The level of involvement, access to and interaction with the provided functionality of the system varies depending on the roles and responsibilities of the stakeholders, for example, only the experts (planners, geological

  8. Context management platform for tourism applications.

    Science.gov (United States)

    Buján, David; Martín, David; Torices, Ortzi; López-de-Ipiña, Diego; Lamsfus, Carlos; Abaitua, Joseba; Alzua-Sorzabal, Aurkene

    2013-06-24

    The notion of context has been widely studied and there are several authors that have proposed different definitions of context. However, context has not been widely studied in the framework of human mobility and the notion of context has been imported directly from other computing fields without specifically addressing the tourism domain requirements. In order to store and manage context information a context data model and a context management platform are needed. Ontologies have been widely used in context modelling, but many of them are designed to be applied in general ubiquitous computing environments, do not contain specific concepts related to the tourism domain or some approaches do not contain enough concepts to represent context information related to the visitor on the move. That is why we propose a new approach to provide a better solution to model context data in tourism environments, adding more value to our solution reusing data about tourist resources from an Open Data repository and publishing it as Linked Data. We also propose the architecture for a context information management platform based on this context data model.

  9. VeSMEL: A Novel Approach for Distance Management of E-Learning Platforms

    Directory of Open Access Journals (Sweden)

    Bernabe Batchakui

    2011-05-01

    Full Text Available This article presents a novel approach for distance management for e-learning platforms based on VeSMp protocol. VeSMEL results from the integration of VeSMp to xMoodle 2.0 platform that has been developed. It offers a compromise between the mobility of actors and the availability of xMoodle 2.0 content in zones where internet is inaccessible. The GSM system is used like support for communication allowing the actors to reach servers from their cell phone.

  10. MASPECTRAS: a platform for management and analysis of proteomics LC-MS/MS data

    Directory of Open Access Journals (Sweden)

    Rader Robert

    2007-06-01

    Full Text Available Abstract Background The advancements of proteomics technologies have led to a rapid increase in the number, size and rate at which datasets are generated. Managing and extracting valuable information from such datasets requires the use of data management platforms and computational approaches. Results We have developed the MAss SPECTRometry Analysis System (MASPECTRAS, a platform for management and analysis of proteomics LC-MS/MS data. MASPECTRAS is based on the Proteome Experimental Data Repository (PEDRo relational database schema and follows the guidelines of the Proteomics Standards Initiative (PSI. Analysis modules include: 1 import and parsing of the results from the search engines SEQUEST, Mascot, Spectrum Mill, X! Tandem, and OMSSA; 2 peptide validation, 3 clustering of proteins based on Markov Clustering and multiple alignments; and 4 quantification using the Automated Statistical Analysis of Protein Abundance Ratios algorithm (ASAPRatio. The system provides customizable data retrieval and visualization tools, as well as export to PRoteomics IDEntifications public repository (PRIDE. MASPECTRAS is freely available at http://genome.tugraz.at/maspectras Conclusion Given the unique features and the flexibility due to the use of standard software technology, our platform represents significant advance and could be of great interest to the proteomics community.

  11. Structural Integrity Management for Fixed Offshore Platforms in Malaysia

    OpenAIRE

    Narayanan Sambu Potty; Mohammad Kabir B. Mohd Akram

    2009-01-01

    Structural Integrity Management (SIM) is important for the protection of offshore crew, environment, business assets and company and industry reputation. API RP 2A contained guidelines for assessment of existing platforms mostly for the Gulf of Mexico (GOM). ISO 19902 SIM framework also does not specifically cater for Malaysia. There are about 200 platforms in Malaysia with 90 exceeding their design life. The Petronas Carigali Sdn Bhd (PCSB) uses the Asset Integrity Management ...

  12. The vacuum platform

    Science.gov (United States)

    McNab, A.

    2017-10-01

    This paper describes GridPP’s Vacuum Platform for managing virtual machines (VMs), which has been used to run production workloads for WLCG and other HEP experiments. The platform provides a uniform interface between VMs and the sites they run at, whether the site is organised as an Infrastructure-as-a-Service cloud system such as OpenStack, or an Infrastructure-as-a-Client system such as Vac. The paper describes our experience in using this platform, in developing and operating VM lifecycle managers Vac and Vcycle, and in interacting with VMs provided by LHCb, ATLAS, ALICE, CMS, and the GridPP DIRAC service to run production workloads.

  13. ADMS Evaluation Platform

    Energy Technology Data Exchange (ETDEWEB)

    2018-01-23

    Deploying an ADMS or looking to optimize its value? NREL offers a low-cost, low-risk evaluation platform for assessing ADMS performance. The National Renewable Energy Laboratory (NREL) has developed a vendor-neutral advanced distribution management system (ADMS) evaluation platform and is expanding its capabilities. The platform uses actual grid-scale hardware, large-scale distribution system models, and advanced visualization to simulate realworld conditions for the most accurate ADMS evaluation and experimentation.

  14. A mass spectrometry proteomics data management platform.

    Science.gov (United States)

    Sharma, Vagisha; Eng, Jimmy K; Maccoss, Michael J; Riffle, Michael

    2012-09-01

    Mass spectrometry-based proteomics is increasingly being used in biomedical research. These experiments typically generate a large volume of highly complex data, and the volume and complexity are only increasing with time. There exist many software pipelines for analyzing these data (each typically with its own file formats), and as technology improves, these file formats change and new formats are developed. Files produced from these myriad software programs may accumulate on hard disks or tape drives over time, with older files being rendered progressively more obsolete and unusable with each successive technical advancement and data format change. Although initiatives exist to standardize the file formats used in proteomics, they do not address the core failings of a file-based data management system: (1) files are typically poorly annotated experimentally, (2) files are "organically" distributed across laboratory file systems in an ad hoc manner, (3) files formats become obsolete, and (4) searching the data and comparing and contrasting results across separate experiments is very inefficient (if possible at all). Here we present a relational database architecture and accompanying web application dubbed Mass Spectrometry Data Platform that is designed to address the failings of the file-based mass spectrometry data management approach. The database is designed such that the output of disparate software pipelines may be imported into a core set of unified tables, with these core tables being extended to support data generated by specific pipelines. Because the data are unified, they may be queried, viewed, and compared across multiple experiments using a common web interface. Mass Spectrometry Data Platform is open source and freely available at http://code.google.com/p/msdapl/.

  15. Work flow management systems applied in nuclear power plants management system to a new computer platform

    International Nuclear Information System (INIS)

    Rodriguez Lorite, M.; Martin Lopez-Suevos, C.

    1996-01-01

    Activities performed in most companies are based on the flow of information between their different departments and personnel. Most of this information is on paper (delivery notes, invoices, reports, etc). The percentage of information transmitted electronically (electronic transactions, spread sheets, files from word processors, etc) is usually low. The implementation of systems to control and speed up this work flow is the aim of work flow management systems. This article presents a prototype for applying work flow management systems to a specific area: the basic life cycle of a purchase order in a nuclear power plant, which requires the involvement of various computer applications: purchase order management, warehouse management, accounting, etc. Once implemented, work flow management systems allow optimisation of the execution of different tasks included in the managed life cycles and provide parameters to, if necessary, control work cycles, allowing their temporary or definitive modification. (Author)

  16. Context Management Platform for Tourism Applications

    Science.gov (United States)

    Buján, David; Martín, David; Torices, Ortzi; López-de-Ipiña, Diego; Lamsfus, Carlos; Abaitua, Joseba; Alzua-Sorzabal, Aurkene

    2013-01-01

    The notion of context has been widely studied and there are several authors that have proposed different definitions of context. However, context has not been widely studied in the framework of human mobility and the notion of context has been imported directly from other computing fields without specifically addressing the tourism domain requirements. In order to store and manage context information a context data model and a context management platform are needed. Ontologies have been widely used in context modelling, but many of them are designed to be applied in general ubiquitous computing environments, do not contain specific concepts related to the tourism domain or some approaches do not contain enough concepts to represent context information related to the visitor on the move. That is why we propose a new approach to provide a better solution to model context data in tourism environments, adding more value to our solution reusing data about tourist resources from an Open Data repository and publishing it as Linked Data. We also propose the architecture for a context information management platform based on this context data model. PMID:23797739

  17. Globus Identity, Access, and Data Management: Platform Services for Collaborative Science

    Science.gov (United States)

    Ananthakrishnan, R.; Foster, I.; Wagner, R.

    2016-12-01

    Globus is software-as-a-service for research data management, developed at, and operated by, the University of Chicago. Globus, accessible at www.globus.org, provides high speed, secure file transfer; file sharing directly from existing storage systems; and data publication to institutional repositories. 40,000 registered users have used Globus to transfer tens of billions of files totaling hundreds of petabytes between more than 10,000 storage systems within campuses and national laboratories in the US and internationally. Web, command line, and REST interfaces support both interactive use and integration into applications and infrastructures. An important component of the Globus system is its foundational identity and access management (IAM) platform service, Globus Auth. Both Globus research data management and other applications use Globus Auth for brokering authentication and authorization interactions between end-users, identity providers, resource servers (services), and a range of clients, including web, mobile, and desktop applications, and other services. Compliant with important standards such as OAuth, OpenID, and SAML, Globus Auth provides mechanisms required for an extensible, integrated ecosystem of services and clients for the research and education community. It underpins projects such as the US National Science Foundation's XSEDE system, NCAR's Research Data Archive, and the DOE Systems Biology Knowledge Base. Current work is extending Globus services to be compliant with FEDRAMP standards for security assessment, authorization, and monitoring for cloud services. We will present Globus IAM solutions and give examples of Globus use in various projects for federated access to resources. We will also describe how Globus Auth and Globus research data management capabilities enable rapid development and low-cost operations of secure data sharing platforms that leverage Globus services and integrate them with local policy and security.

  18. Implementation of a design and configuration management platform for fusion components on the Tore Supra WEST Project

    Energy Technology Data Exchange (ETDEWEB)

    Benoît, Fabrice, E-mail: fabrice-2.benoit@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Allegretti, Ludovic [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Aumeunier, Marie-Hélène [OPTIS, ZE de La Farlède, F-83078 Toulon Cedex 9 (France); Bucalossi, Jérôme; Doceul, Louis; Faïsse, Frederic; Firdaouss, Medhi; Geynet, Michel; Houtte, Didier van; Larroque, Sébastien; Magaud, Philippe; Maini, Patrick; Missirlian, Marc; Parrat, Hélène [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Robert, Julien [SOFYNE, F-69800 Saint Priest (France)

    2014-10-15

    Highlights: •A design and configuration management platform is under development for managing fusion components lifecycle at CEA. •Design platform ensures an efficient sharing of the data and provides connections between the different software and databases involved in fusion components design. •Design platform rollout on WEST project is ongoing as part of change control and configuration management implementation. -- Abstract: This paper presents the technical solutions and methodologies that are used and under development for managing the design lifecycle of the WEST project (W – for tungsten – Environment in Steady-state Tokamak, upgrade of Tore Supra's with actively cooled tungsten plasma facing components) fusion components and explains the interfaces that are implemented or in construction to connect together the different tools like documents management system, CAD modeler, or simulation codes around the data management backbone. It describes the methodologies used on the WEST project to optimize the design process by managing the engineering data workflow and ensuring the consistency between the different 3D representations for design or analysis as well as the specification or interfaces documents. Finally it explains how this platform contributes to reach the project targets in terms of performance, cost and schedule.

  19. Implementation of a design and configuration management platform for fusion components on the Tore Supra WEST Project

    International Nuclear Information System (INIS)

    Benoît, Fabrice; Allegretti, Ludovic; Aumeunier, Marie-Hélène; Bucalossi, Jérôme; Doceul, Louis; Faïsse, Frederic; Firdaouss, Medhi; Geynet, Michel; Houtte, Didier van; Larroque, Sébastien; Magaud, Philippe; Maini, Patrick; Missirlian, Marc; Parrat, Hélène; Robert, Julien

    2014-01-01

    Highlights: •A design and configuration management platform is under development for managing fusion components lifecycle at CEA. •Design platform ensures an efficient sharing of the data and provides connections between the different software and databases involved in fusion components design. •Design platform rollout on WEST project is ongoing as part of change control and configuration management implementation. -- Abstract: This paper presents the technical solutions and methodologies that are used and under development for managing the design lifecycle of the WEST project (W – for tungsten – Environment in Steady-state Tokamak, upgrade of Tore Supra's with actively cooled tungsten plasma facing components) fusion components and explains the interfaces that are implemented or in construction to connect together the different tools like documents management system, CAD modeler, or simulation codes around the data management backbone. It describes the methodologies used on the WEST project to optimize the design process by managing the engineering data workflow and ensuring the consistency between the different 3D representations for design or analysis as well as the specification or interfaces documents. Finally it explains how this platform contributes to reach the project targets in terms of performance, cost and schedule

  20. Which Recommender System Can Best Fit Social Learning Platforms?

    OpenAIRE

    Fazeli, Soude; Loni, Babak; Drachsler, Hendrik; Sloep, Peter

    2014-01-01

    In this presentation, we present a study that aims to develop a recommender system for social learning platforms that combine traditional learning management systems with commercial social networks like Facebook. We therefore take into account social interactions of users to make recommendations on learning resources. We propose to make use of graph-walking methods for improving performance of the well-known baseline algorithms. We evaluate the proposed graph-based approach in terms of their ...

  1. Polymer-based platform for microfluidic systems

    Science.gov (United States)

    Benett, William [Livermore, CA; Krulevitch, Peter [Pleasanton, CA; Maghribi, Mariam [Livermore, CA; Hamilton, Julie [Tracy, CA; Rose, Klint [Boston, MA; Wang, Amy W [Oakland, CA

    2009-10-13

    A method of forming a polymer-based microfluidic system platform using network building blocks selected from a set of interconnectable network building blocks, such as wire, pins, blocks, and interconnects. The selected building blocks are interconnectably assembled and fixedly positioned in precise positions in a mold cavity of a mold frame to construct a three-dimensional model construction of a microfluidic flow path network preferably having meso-scale dimensions. A hardenable liquid, such as poly (dimethylsiloxane) is then introduced into the mold cavity and hardened to form a platform structure as well as to mold the microfluidic flow path network having channels, reservoirs and ports. Pre-fabricated elbows, T's and other joints are used to interconnect various building block elements together. After hardening the liquid the building blocks are removed from the platform structure to make available the channels, cavities and ports within the platform structure. Microdevices may be embedded within the cast polymer-based platform, or bonded to the platform structure subsequent to molding, to create an integrated microfluidic system. In this manner, the new microfluidic platform is versatile and capable of quickly generating prototype systems, and could easily be adapted to a manufacturing setting.

  2. Framework Programmable Platform for the Advanced Software Development Workstation: Preliminary system design document

    Science.gov (United States)

    Mayer, Richard J.; Blinn, Thomas M.; Mayer, Paula S. D.; Ackley, Keith A.; Crump, John W., IV; Henderson, Richard; Futrell, Michael T.

    1991-01-01

    The Framework Programmable Software Development Platform (FPP) is a project aimed at combining effective tool and data integration mechanisms with a model of the software development process in an intelligent integrated software environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The focus here is on the design of components that make up the FPP. These components serve as supporting systems for the Integration Mechanism and the Framework Processor and provide the 'glue' that ties the FPP together. Also discussed are the components that allow the platform to operate in a distributed, heterogeneous environment and to manage the development and evolution of software system artifacts.

  3. Integrated Computer System of Management in Logistics

    Science.gov (United States)

    Chwesiuk, Krzysztof

    2011-06-01

    This paper aims at presenting a concept of an integrated computer system of management in logistics, particularly in supply and distribution chains. Consequently, the paper includes the basic idea of the concept of computer-based management in logistics and components of the system, such as CAM and CIM systems in production processes, and management systems for storage, materials flow, and for managing transport, forwarding and logistics companies. The platform which integrates computer-aided management systems is that of electronic data interchange.

  4. A PUBLIC PLATFORM FOR GEOSPATIAL DATA SHARING FOR DISASTER RISK MANAGEMENT

    Directory of Open Access Journals (Sweden)

    S. Balbo

    2014-01-01

    This paper presents a case study scenario of setting up a Web platform based on GeoNode. It is a public platform called MASDAP and promoted by the Government of Malawi in order to support development of the country and build resilience against natural disasters. A substantial amount of geospatial data has already been collected about hydrogeological risk, as well as several other-disasters related information. Moreover this platform will help to ensure that the data created by a number of past or ongoing projects is maintained and that this information remains accessible and useful. An Integrated Flood Risk Management Plan for a river basin has already been included in the platform and other data from future disaster risk management projects will be added as well.

  5. RMS: a platform for managing cross-disciplinary and multi-institutional research project collaboration.

    Science.gov (United States)

    Luo, Jake; Apperson-Hansen, Carolyn; Pelfrey, Clara M; Zhang, Guo-Qiang

    2014-11-30

    Cross-institutional cross-disciplinary collaboration has become a trend as researchers move toward building more productive and innovative teams for scientific research. Research collaboration is significantly changing the organizational structure and strategies used in the clinical and translational science domain. However, due to the obstacles of diverse administrative structures, differences in area of expertise, and communication barriers, establishing and managing a cross-institutional research project is still a challenging task. We address these challenges by creating an integrated informatics platform to reduce the barriers to biomedical research collaboration. The Request Management System (RMS) is an informatics infrastructure designed to transform a patchwork of expertise and resources into an integrated support network. The RMS facilitates investigators' initiation of new collaborative projects and supports the management of the collaboration process. In RMS, experts and their knowledge areas are categorized and managed structurally to provide consistent service. A role-based collaborative workflow is tightly integrated with domain experts and services to streamline and monitor the life-cycle of a research project. The RMS has so far tracked over 1,500 investigators with over 4,800 tasks. The research network based on the data collected in RMS illustrated that the investigators' collaborative projects increased close to 3 times from 2009 to 2012. Our experience with RMS indicates that the platform reduces barriers for cross-institutional collaboration of biomedical research projects. Building a new generation of infrastructure to enhance cross-disciplinary and multi-institutional collaboration has become an important yet challenging task. In this paper, we share the experience of developing and utilizing a collaborative project management system. The results of this study demonstrate that a web-based integrated informatics platform can facilitate and

  6. Research on University Network Teaching Platform (Blackboard in Teaching Management

    Directory of Open Access Journals (Sweden)

    Gou Zhao Xia

    2016-01-01

    Full Text Available With rapid development of online education; teaching platform based on the network, as a new instructional mode has become a hot topic in online teaching. In this paper, the he teaching situation and existing problems on online was analyzed by comparing the difference between network teaching platform and traditional classroom teaching. Then the strategies of network teaching management and the case, which is focusing on the characteristics of Blackboard with the application of network teaching management was presents.

  7. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  8. Design and Implementation of an ASON Management System

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    According to current management requirements, an ASON management information model and system architecture using CORBA and Java are proposed. A test platform is implemented to demonstrate multi-domain, connection and control plane management.

  9. Ways to integrate document management systems with industrial plant configuration management systems

    International Nuclear Information System (INIS)

    Munoz, M.

    1995-01-01

    Based on experience gained from tasks carried out for Almaraz Nuclear Power Plant, this paper describes computer platforms used both at the power plant and in the main offices of the engineering company. Subsequently, a description is given of the procedure followed for the continuous up-dating of plant documentation, in order to maintain consistency with other information stored in data bases in the Operation Management System, Maintenance System, Modification Management System, etc. The work method used for the unitary updating of all information (document images and attributes corresponding to the different data bases), following refuelling procedures is also described. Lastly, the paper describes the functions and the user interface of the system used in the power plant for document management. (Author)

  10. Implementation of a Real-Time Microgrid Simulation Platform Based on Centralized and Distributed Management

    Directory of Open Access Journals (Sweden)

    Omid Abrishambaf

    2017-06-01

    Full Text Available Demand response and distributed generation are key components of power systems. Several challenges are raised at both technical and business model levels for integration of those resources in smart grids and microgrids. The implementation of a distribution network as a test bed can be difficult and not cost-effective; using computational modeling is not sufficient for producing realistic results. Real-time simulation allows us to validate the business model’s impact at the technical level. This paper comprises a platform supporting the real-time simulation of a microgrid connected to a larger distribution network. The implemented platform allows us to use both centralized and distributed energy resource management. Using an optimization model for the energy resource operation, a virtual power player manages all the available resources. Then, the simulation platform allows us to technically validate the actual implementation of the requested demand reduction in the scope of demand response programs. The case study has 33 buses, 220 consumers, and 68 distributed generators. It demonstrates the impact of demand response events, also performing resource management in the presence of an energy shortage.

  11. An Open Source Software and Web-GIS Based Platform for Airborne SAR Remote Sensing Data Management, Distribution and Sharing

    Science.gov (United States)

    Changyong, Dou; Huadong, Guo; Chunming, Han; Ming, Liu

    2014-03-01

    With more and more Earth observation data available to the community, how to manage and sharing these valuable remote sensing datasets is becoming an urgent issue to be solved. The web based Geographical Information Systems (GIS) technology provides a convenient way for the users in different locations to share and make use of the same dataset. In order to efficiently use the airborne Synthetic Aperture Radar (SAR) remote sensing data acquired in the Airborne Remote Sensing Center of the Institute of Remote Sensing and Digital Earth (RADI), Chinese Academy of Sciences (CAS), a Web-GIS based platform for airborne SAR data management, distribution and sharing was designed and developed. The major features of the system include map based navigation search interface, full resolution imagery shown overlaid the map, and all the software adopted in the platform are Open Source Software (OSS). The functions of the platform include browsing the imagery on the map navigation based interface, ordering and downloading data online, image dataset and user management, etc. At present, the system is under testing in RADI and will come to regular operation soon.

  12. A holistic approach to SIM platform and its application to early-warning satellite system

    Science.gov (United States)

    Sun, Fuyu; Zhou, Jianping; Xu, Zheyao

    2018-01-01

    This study proposes a new simulation platform named Simulation Integrated Management (SIM) for the analysis of parallel and distributed systems. The platform eases the process of designing and testing both applications and architectures. The main characteristics of SIM are flexibility, scalability, and expandability. To improve the efficiency of project development, new models of early-warning satellite system were designed based on the SIM platform. Finally, through a series of experiments, the correctness of SIM platform and the aforementioned early-warning satellite models was validated, and the systematical analyses for the orbital determination precision of the ballistic missile during its entire flight process were presented, as well as the deviation of the launch/landing point. Furthermore, the causes of deviation and prevention methods will be fully explained. The simulation platform and the models will lay the foundations for further validations of autonomy technology in space attack-defense architecture research.

  13. A service platform architecture design towards a light integration of heterogeneous systems in the wellbeing domain.

    Science.gov (United States)

    Yang, Yaojin; Ahtinen, Aino; Lahteenmaki, Jaakko; Nyman, Petri; Paajanen, Henrik; Peltoniemi, Teijo; Quiroz, Carlos

    2007-01-01

    System integration is one of the major challenges for building wellbeing or healthcare related information systems. In this paper, we are going to share our experiences on how to design a service platform called Nuadu service platform, for providing integrated services in occupational health promotion and health risk management through two heterogeneous systems. Our design aims for a light integration covering the layers, from data through service up to presentation, while maintaining the integrity of the underlying systems.

  14. On the Supply Chain Management Supported by E-Commerce Service Platform for Agreement based Circulation of Fruits and Vegetables

    Science.gov (United States)

    Bao, Liwei; Huang, Yuchi; Ma, Zengjun; Zhang, Jie; Lv, Qingchu

    According to analysis of the supply chain process of agricultural products, the IT application requirements of the market entities participating in the agreement based circulation of fruits and vegetables have been discussed. The strategy of supply chain management basing on E-commerce service platform for fruits and vegetables has been proposed in this paper. The architecture and function composing of the service platform have been designed and implemented. The platform is constructed on a set of application service modules User can choose some of the application service modules and define them according to the business process. The application service modules chosen and defined by user are integrated as an application service package and applied as management information system of business process. With the E-commerce service platform, the supply chain management for agreement based circulation of agricultural products of vegetables and fruits can be implemented.

  15. Train-to-Ground communications of a Train Control and Monitoring Systems: A simulation platform modelling approach

    DEFF Research Database (Denmark)

    Bouaziz, Maha; Yan, Ying; Kassab, Mohamed

    2018-01-01

    wireless technologies, e.g. Wi-Fi and LTE. Different T2G scenarios are defined in order to evaluate the performances of the Mobile Communication Gateway (managing train communications) and Quality of Services (QoS) offered to TCMS applications in the context of various environments (regular train lines......Under the SAFE4RAIL project, we are developing a simulation platform based on a discrete-events network simulator. This platform models the Train-to-Ground (T2G) link in the framework of a system-level simulation of Train Control Management System (TCMS). The modelled T2G link is based on existing...

  16. Embedded Linux platform for data acquisition systems

    International Nuclear Information System (INIS)

    Patel, Jigneshkumar J.; Reddy, Nagaraj; Kumari, Praveena; Rajpal, Rachana; Pujara, Harshad; Jha, R.; Kalappurakkal, Praveen

    2014-01-01

    Highlights: • The design and the development of data acquisition system on FPGA based reconfigurable hardware platform. • Embedded Linux configuration and compilation for FPGA based systems. • Hardware logic IP core and its Linux device driver development for the external peripheral to interface it with the FPGA based system. - Abstract: This scalable hardware–software system is designed and developed to explore the emerging open standards for data acquisition requirement of Tokamak experiments. To address the future need for a scalable data acquisition and control system for fusion experiments, we have explored the capability of software platform using Open Source Embedded Linux Operating System on a programmable hardware platform such as FPGA. The idea was to identify the platform which can be customizable, flexible and scalable to support the data acquisition system requirements. To do this, we have selected FPGA based reconfigurable and scalable hardware platform to design the system with Embedded Linux based operating system for flexibility in software development and Gigabit Ethernet interface for high speed data transactions. The proposed hardware–software platform using FPGA and Embedded Linux OS offers a single chip solution with processor, peripherals such ADC interface controller, Gigabit Ethernet controller, memory controller amongst other peripherals. The Embedded Linux platform for data acquisition is implemented and tested on a Virtex-5 FXT FPGA ML507 which has PowerPC 440 (PPC440) [2] hard block on FPGA. For this work, we have used the Linux Kernel version 2.6.34 with BSP support for the ML507 platform. It is downloaded from the Xilinx [1] GIT server. Cross-compiler tool chain is created using the Buildroot scripts. The Linux Kernel and Root File System are configured and compiled using the cross-tools to support the hardware platform. The Analog to Digital Converter (ADC) IO module is designed and interfaced with the ML507 through Xilinx

  17. Embedded Linux platform for data acquisition systems

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Jigneshkumar J., E-mail: jjp@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Reddy, Nagaraj, E-mail: nagaraj.reddy@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India); Kumari, Praveena, E-mail: praveena@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Rajpal, Rachana, E-mail: rachana@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Pujara, Harshad, E-mail: pujara@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Jha, R., E-mail: rjha@ipr.res.in [Institute for Plasma Research, Gandhinagar, Gujarat (India); Kalappurakkal, Praveen, E-mail: praveen.k@coreel.com [Sandeepani School of Embedded System Design, Bangalore, Karnataka (India)

    2014-05-15

    Highlights: • The design and the development of data acquisition system on FPGA based reconfigurable hardware platform. • Embedded Linux configuration and compilation for FPGA based systems. • Hardware logic IP core and its Linux device driver development for the external peripheral to interface it with the FPGA based system. - Abstract: This scalable hardware–software system is designed and developed to explore the emerging open standards for data acquisition requirement of Tokamak experiments. To address the future need for a scalable data acquisition and control system for fusion experiments, we have explored the capability of software platform using Open Source Embedded Linux Operating System on a programmable hardware platform such as FPGA. The idea was to identify the platform which can be customizable, flexible and scalable to support the data acquisition system requirements. To do this, we have selected FPGA based reconfigurable and scalable hardware platform to design the system with Embedded Linux based operating system for flexibility in software development and Gigabit Ethernet interface for high speed data transactions. The proposed hardware–software platform using FPGA and Embedded Linux OS offers a single chip solution with processor, peripherals such ADC interface controller, Gigabit Ethernet controller, memory controller amongst other peripherals. The Embedded Linux platform for data acquisition is implemented and tested on a Virtex-5 FXT FPGA ML507 which has PowerPC 440 (PPC440) [2] hard block on FPGA. For this work, we have used the Linux Kernel version 2.6.34 with BSP support for the ML507 platform. It is downloaded from the Xilinx [1] GIT server. Cross-compiler tool chain is created using the Buildroot scripts. The Linux Kernel and Root File System are configured and compiled using the cross-tools to support the hardware platform. The Analog to Digital Converter (ADC) IO module is designed and interfaced with the ML507 through Xilinx

  18. An Integrated System for Disabled People Developed with the Agent Platform PANGEA

    Directory of Open Access Journals (Sweden)

    Carolina ZATO

    2013-11-01

    Full Text Available New trends in multi-agent systems call for self-adaptation and high dynamics, hence the new model of open MAS or virtual organization of agents. However, as existing agent platforms are not yet equipped to support this behavior, it is necessary to create new systems and mechanisms to facilitate the development of these new architectures. This article presents PANGEA, an agent platform to develop open multi-agent systems, specifically those including organizational aspects such as virtual agent organizations. The platform allows the integral management of organizations and offers tools to the end user. Additionally, it includes a communication protocol based on the IRC standard, which facilitates implementation and remains robust even with a large number of connections. The introduction of a CommunicationAgent and a Sniffer make it possible to offer Web Services for the distributed control of interaction. In order to test PANGEA, an integral system was developed to help the disabled, gathering a set of easily deployable and integrated services under a single architecture.

  19. Platform Architecture for Decentralized Positioning Systems

    Directory of Open Access Journals (Sweden)

    Zakaria Kasmi

    2017-04-01

    Full Text Available A platform architecture for positioning systems is essential for the realization of a flexible localization system, which interacts with other systems and supports various positioning technologies and algorithms. The decentralized processing of a position enables pushing the application-level knowledge into a mobile station and avoids the communication with a central unit such as a server or a base station. In addition, the calculation of the position on low-cost and resource-constrained devices presents a challenge due to the limited computing, storage capacity, as well as power supply. Therefore, we propose a platform architecture that enables the design of a system with the reusability of the components, extensibility (e.g., with other positioning technologies and interoperability. Furthermore, the position is computed on a low-cost device such as a microcontroller, which simultaneously performs additional tasks such as data collecting or preprocessing based on an operating system. The platform architecture is designed, implemented and evaluated on the basis of two positioning systems: a field strength system and a time of arrival-based positioning system.

  20. Management systems in production operations

    International Nuclear Information System (INIS)

    Walters, K.B.; Henderson, G.

    1993-01-01

    The Cullen Enquiry into the Piper Alpha disaster in the U.K. North Sea recommended that an operator should formally present it's company Management System and demonstrate how safety is achieved throughout the life cycle of a platform, from design through operation to abandonment. Brunei Shell Petroleum has prepared a corporate level Safety Management System. As part of Safety Case work, the corporate system is being extended to include the development of specific Management Systems with particular emphasis on offshore production operations involving integrated oil and gas facilities. This paper will describe the development of Management Systems, which includes an intensive Business Process Analysis and will comment upon it's applicability and relationship to ISO 9000. The paper will further describe the applicability and benefits of Management Systems and offer guidance on required effort. The paper will conclude that development of structured Management Systems for safety critical business processes is worthwhile but prioritization of effort will be necessary. As such the full adoption of Management Systems will be directional in nature

  1. A DVE Time Management Simulation and Verification Platform Based on Causality Consistency Middleware

    Science.gov (United States)

    Zhou, Hangjun; Zhang, Wei; Peng, Yuxing; Li, Sikun

    During the course of designing a time management algorithm for DVEs, the researchers always become inefficiency for the distraction from the realization of the trivial and fundamental details of simulation and verification. Therefore, a platform having realized theses details is desirable. However, this has not been achieved in any published work to our knowledge. In this paper, we are the first to design and realize a DVE time management simulation and verification platform providing exactly the same interfaces as those defined by the HLA Interface Specification. Moreover, our platform is based on a new designed causality consistency middleware and might offer the comparison of three kinds of time management services: CO, RO and TSO. The experimental results show that the implementation of the platform only costs small overhead, and that the efficient performance of it is highly effective for the researchers to merely focus on the improvement of designing algorithms.

  2. Reconfigurable, Intelligently-Adaptive, Communication System, an SDR Platform

    Science.gov (United States)

    Roche, Rigoberto J.; Shalkhauser, Mary Jo; Hickey, Joseph P.; Briones, Janette C.

    2016-01-01

    The Space Telecommunications Radio System (STRS) provides a common, consistent framework to abstract the application software from the radio platform hardware. STRS aims to reduce the cost and risk of using complex, configurable and reprogrammable radio systems across NASA missions. The NASA Glenn Research Center (GRC) team made a software defined radio (SDR) platform STRS compliant by adding an STRS operating environment and a field programmable gate array (FPGA) wrapper, capable of implementing each of the platforms interfaces, as well as a test waveform to exercise those interfaces. This effort serves to provide a framework toward waveform development onto an STRS compliant platform to support future space communication systems for advanced exploration missions. The use of validated STRS compliant applications provides tested code with extensive documentation to potentially reduce risk, cost and e ort in development of space-deployable SDRs. This paper discusses the advantages of STRS, the integration of STRS onto a Reconfigurable, Intelligently-Adaptive, Communication System (RIACS) SDR platform, and the test waveform and wrapper development e orts. The paper emphasizes the infusion of the STRS Architecture onto the RIACS platform for potential use in next generation flight system SDRs for advanced exploration missions.

  3. Development of Student Information Management System based on Cloud Computing Platform

    Directory of Open Access Journals (Sweden)

    Ibrahim A. ALAMERI

    2017-10-01

    Full Text Available The management and provision of information about the educational process is an essential part of effective management of the educational process in the institutes of higher education. In this paper the requirements of a reliable student management system are analyzed, formed a use-case model of student information management system, designed and implemented the architecture of the application. Regarding the implementation process, modern approaches were used to develop and deploy a reliable online application in cloud computing environments specifically.

  4. Power System and Energy Storage Models for Laser Integration on Naval Platforms

    Science.gov (United States)

    2015-09-30

    Power System and Energy Storage Models for Laser Integration on Naval Platforms A.L. Gattozzi, J.D. Herbst, R.E. Hebner Center for... Electromechanics , University of Texas Austin, Texas a.gattozzi@cem.utexas.edu J.A. Blau, K.R. Cohn, W.B. Colson, J.E. Sylvester, M.A. Woehrman Physics...emerging technologies present significant challenges to the electric power distribution and thermal management systems, particularly for

  5. How platforms are transforming customer information\\ud management

    OpenAIRE

    Stone, Merlin; Aravopoulou, Eleni; Girardi, Gherardo; Weinzierl, Luisa; Laughlin, Paul; Stott, Ryan; Todeva, Emanuela

    2017-01-01

    Purpose\\ud The purpose of this paper is to explain the development of ecosystems and platforms to manage customer information, and to identify the management, research and teaching implications of this evolution.\\ud \\ud Design/methodology/approach\\ud This article is based on research and industrial experience of two of the co-authors in customer relationshipmanagement, further developed with other co-authors in the field of business models, the research and teaching experience of the universi...

  6. Platform attitude data acquisition system

    Digital Repository Service at National Institute of Oceanography (India)

    Afzulpurkar, S.

    A system for automatic acquisition of underwater platform attitude data has been designed, developed and tested in the laboratory. This is a micro controller based system interfacing dual axis inclinometer, high-resolution digital compass...

  7. Compact PCI/Linux platform in FTU slow control system

    International Nuclear Information System (INIS)

    Iannone, F.; Centioli, C.; Panella, M.; Mazza, G.; Vitale, V.; Wang, L.

    2004-01-01

    In large fusion experiments, such as tokamak devices, there is a common trend for slow control systems. Because of complexity of the plants, the so-called 'Standard Model' (SM) in slow control has been adopted on several tokamak machines. This model is based on a three-level hierarchical control: 1) High-Level Control (HLC) with a supervisory function; 2) Medium-Level Control (MLC) to interface and concentrate I/O field equipment; 3) Low-Level Control (LLC) with hard real-time I/O function, often managed by PLCs. FTU (Frascati Tokamak Upgrade) control system designed with SM concepts has underwent several stages of developments in its fifteen years duration of runs. The latest evolution was inevitable, due to the obsolescence of the MLC CPUs, based on VME-MOTOROLA 68030 with OS9 operating system. A large amount of C code was developed for that platform to route the data flow from LLC, which is constituted by 24 Westinghouse Numalogic PC-700 PLCs with about 8000 field-points, to HLC, based on a commercial Object-Oriented Real-Time database on Alpha/CompaqTru64 platform. Therefore, authors have to look for cost-effective solutions and finally a CompactPCI-Intel x86 platform with Linux operating system was chosen. A software porting has been done, taking into account the differences between OS9 and Linux operating system in terms of Inter/Network Processes Communications and I/O multi-ports serial driver. This paper describes the hardware/software architecture of the new MLC system, emphasizing the reliability and the low costs of the open source solutions. Moreover, a huge amount of software packages available in open source environment will assure a less painful maintenance, and will open the way to further improvements of the system itself. (authors)

  8. Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

    Directory of Open Access Journals (Sweden)

    Young-Joo Song

    2011-09-01

    In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

  9. PR-PR: cross-platform laboratory automation system.

    Science.gov (United States)

    Linshiz, Gregory; Stawski, Nina; Goyal, Garima; Bi, Changhao; Poust, Sean; Sharma, Monica; Mutalik, Vivek; Keasling, Jay D; Hillson, Nathan J

    2014-08-15

    To enable protocol standardization, sharing, and efficient implementation across laboratory automation platforms, we have further developed the PR-PR open-source high-level biology-friendly robot programming language as a cross-platform laboratory automation system. Beyond liquid-handling robotics, PR-PR now supports microfluidic and microscopy platforms, as well as protocol translation into human languages, such as English. While the same set of basic PR-PR commands and features are available for each supported platform, the underlying optimization and translation modules vary from platform to platform. Here, we describe these further developments to PR-PR, and demonstrate the experimental implementation and validation of PR-PR protocols for combinatorial modified Golden Gate DNA assembly across liquid-handling robotic, microfluidic, and manual platforms. To further test PR-PR cross-platform performance, we then implement and assess PR-PR protocols for Kunkel DNA mutagenesis and hierarchical Gibson DNA assembly for microfluidic and manual platforms.

  10. Adaptive Management of Communication in the Chamilo System of Distant Learning

    OpenAIRE

    Yatsenko Roman Nikolaevich; Polevich Olesya V.

    2012-01-01

    The article considers the communication management within an adaptive system of distance learning. We present two-circuit interaction system of the adaptive system. We consider the implementation of management communication in distance learning system based on the platform Chamilo.

  11. SERVIR-Africa: Developing an Integrated Platform for Floods Disaster Management in Africa

    Science.gov (United States)

    Macharia, Daniel; Korme, Tesfaye; Policelli, Fritz; Irwin, Dan; Adler, Bob; Hong, Yang

    2010-01-01

    SERVIR-Africa is an ambitious regional visualization and monitoring system that integrates remotely sensed data with predictive models and field-based data to monitor ecological processes and respond to natural disasters. It aims addressing societal benefits including floods and turning data into actionable information for decision-makers. Floods are exogenous disasters that affect many parts of Africa, probably second only to drought in terms of social-economic losses. This paper looks at SERVIR-Africa's approach to floods disaster management through establishment of an integrated platform, floods prediction models, post-event flood mapping and monitoring as well as flood maps dissemination in support of flood disaster management.

  12. Constructing collaboration and management platform with spring+ hibernate

    International Nuclear Information System (INIS)

    Zhang Hongmei; Ou Ge; Nie Jianyin; Song Liming; Chen Gang

    2007-01-01

    HCMP is the platform of collaboration and management for HXMT. The documents of HXMT project are the main context of HCMP. Besides the users of HXMT project, HCMP also serves other users. HCMP adopts the hierarchy Web structure to implement context release, documents approval, project management and portal website. HCMP provides the support of informatlization and standardization for HXMT project. This paper adopts Spring + Hibernate technique to construct the J2EE architecture, based on which HCMP is implemented. (authors)

  13. Knowledge Management: A Conceptual Platform for the Sharing of Ideas.

    Science.gov (United States)

    Mahdjoubi, Darius; Harmon, Glynn

    2001-01-01

    The concept of the learning organization and intellectual capital were instrumental in the beginning stage of knowledge management, about 1995. From the spontaneous combination of these two fields, the modern concept of knowledge management as a conceptual platform emerged. The seven main fields that are so far most intimately connected to…

  14. UAV Flight Control Based on RTX System Simulation Platform

    Directory of Open Access Journals (Sweden)

    Xiaojun Duan

    2014-03-01

    Full Text Available This paper proposes RTX and Matlab UAV flight control system simulation platform based on the advantages and disadvantages of Windows and real-time system RTX. In the simulation platform, we set the RTW toolbox configuration and modify grt_main.c in order to make simulation platform endowed with online parameter adjustment, fault injection. Meanwhile, we develop the interface of the system simulation platform by CVI, thus it makes effective and has good prospects in application. In order to improve the real-time performance of simulation system, the current computer of real-time simulation mostly use real-time operating system to solve simulation model, as well as dual- framework containing in Host and target machine. The system is complex, high cost, and generally used for the control and half of practical system simulation. For the control system designers, they expect to design control law at a computer with Windows-based environment and conduct real-time simulation. This paper proposes simulation platform for UAV flight control system based on RTX and Matlab for this demand.

  15. Study on concept of web-based reactor piping design data platform

    International Nuclear Information System (INIS)

    Wang Yu; Zhou Yu; Dong Jianling; Meng Yang

    2005-01-01

    For solving the piping design problems such as design data deficiency, designer communication inconvenience and design project inconsistence, Reactor Piping Design Database Platform, which is the main part of the Integrated Nuclear Project Research Platform, is proposed by analyzing the nuclear piping designs in detail. The functions and system structures of the platform are described in the paper for the sake of the realization of the Reactor Piping Design Database Platform. The platform is constituted by web-based management interface, AutoPlant selected as CAD software, and relation database management system (DBMS). (authors)

  16. Smart City Platform Development for an Automated Waste Collection System

    Directory of Open Access Journals (Sweden)

    Cicerone Laurentiu Popa

    2017-11-01

    Full Text Available Nowadays, governments and companies are looking for solutions to increase the collection level of various waste types by using new technologies and devices such as smart sensors, Internet of Things (IoT, cloud platforms etc. In order to fulfil this need, this paper presents solutions provided by a research project involving the design, development and implementation of fully automated waste collection systems with an increased usage degree, productivity and storage capacity. The paper will focus on the main results of this research project in turning the automated waste collection system into a smart system so that it can be easily integrated in any smart city infrastructure. For this purpose, the Internet of Things platform for the automated waste collection system provided by the project will allow real time monitoring and communication with central systems. Details about each module are sent to the central systems: various modules’ statuses (working, blocked, needs repairs or maintenance etc.; equipment status; storage systems status (allowing full reports for all waste types; the amount of waste for each module, allowing optimal discharging; route optimization for waste discharging etc. To do that, we describe here an IoT cloud solution integrating device connection, data processing, analytics and management.

  17. WebGIS Platform Adressed to Forest Fire Management Methodologies

    Science.gov (United States)

    André Ramos-Simões, Nuno; Neto Paixão, Helena Maria; Granja Martins, Fernando Miguel; Pedras, Celestina; Lança, Rui; Silva, Elisa; Jordán, António; Zavala, Lorena; Soares, Cristina

    2015-04-01

    Forest fires are one of the natural disasters that causes more damages in nature, as well as high material costs, and sometimes, a significant losses in human lives. In summer season, when high temperatures are attained, fire may rapidly progress and destroy vast areas of forest and also rural and urban areas. The forest fires have effect on forest species, forest composition and structure, soil properties and soil capacity for nutrient retention. In order to minimize the negative impact of the forest fires in the environment, many studies have been developed, e.g. Jordán et al (2009), Cerdà & Jordán (2010), and Gonçalves & Vieira (2013). Nowadays, Remote Sensing (RS) and Geographic Information System (GIS) technologies are used as support tools in fire management decisions, namely during the fire, but also before and after. This study presents the development of a user-friendly WebGIS dedicated to share data, maps and provide updated information on forest fire management for stakeholders in Iberia Peninsula. The WebGIS platform was developed with ArcGIS Online, ArcGIS for Desktop; HyperText Markup Language (HTML) and Javascript. This platform has a database that includes spatial and alphanumeric information, such as: origin, burned areas, vegetation change over time, terrain natural slope, land use, soil erosion and fire related hazards. The same database contains also the following relevant information: water sources, forest tracks and traffic ways, lookout posts and urban areas. The aim of this study is to provide the authorities with a tool to assess risk areas and manage more efficiently forest fire hazards, giving more support to their decisions and helping the populations when facing this kind of phenomena.

  18. Knowledge Sharing via Social Networking Platforms in Organizations

    Science.gov (United States)

    Kettles, Degan

    2012-01-01

    Knowledge Management Systems have been actively promoted for decades within organizations but have frequently failed to be used. Recently, deployments of enterprise social networking platforms used for knowledge management have become commonplace. These platforms help harness the knowledge of workers by serving as repositories of knowledge as well…

  19. Performance assessment of a programmable five degrees-of-freedom motion platform for quality assurance of motion management techniques in radiotherapy.

    Science.gov (United States)

    Huang, Chen-Yu; Keall, Paul; Rice, Adam; Colvill, Emma; Ng, Jin Aun; Booth, Jeremy T

    2017-09-01

    Inter-fraction and intra-fraction motion management methods are increasingly applied clinically and require the development of advanced motion platforms to facilitate testing and quality assurance program development. The aim of this study was to assess the performance of a 5 degrees-of-freedom (DoF) programmable motion platform HexaMotion (ScandiDos, Uppsala, Sweden) towards clinically observed tumor motion range, velocity, acceleration and the accuracy requirements of SABR prescribed in AAPM Task Group 142. Performance specifications for the motion platform were derived from literature regarding the motion characteristics of prostate and lung tumor targets required for real time motion management. The performance of the programmable motion platform was evaluated against (1) maximum range, velocity and acceleration (5 DoF), (2) static position accuracy (5 DoF) and (3) dynamic position accuracy using patient-derived prostate and lung tumor motion traces (3 DoF). Translational motion accuracy was compared against electromagnetic transponder measurements. Rotation was benchmarked with a digital inclinometer. The static accuracy and reproducibility for translation and rotation was quality assurance and commissioning of motion management systems in radiation oncology.

  20. Free web-based modelling platform for managed aquifer recharge (MAR) applications

    Science.gov (United States)

    Stefan, Catalin; Junghanns, Ralf; Glaß, Jana; Sallwey, Jana; Fatkhutdinov, Aybulat; Fichtner, Thomas; Barquero, Felix; Moreno, Miguel; Bonilla, José; Kwoyiga, Lydia

    2017-04-01

    Managed aquifer recharge represents a valuable instrument for sustainable water resources management. The concept implies purposeful infiltration of surface water into underground for later recovery or environmental benefits. Over decades, MAR schemes were successfully installed worldwide for a variety of reasons: to maximize the natural storage capacity of aquifers, physical aquifer management, water quality management, and ecological benefits. The INOWAS-DSS platform provides a collection of free web-based tools for planning, management and optimization of main components of MAR schemes. The tools are grouped into 13 specific applications that cover most relevant challenges encountered at MAR sites, both from quantitative and qualitative perspectives. The applications include among others the optimization of MAR site location, the assessment of saltwater intrusion, the restoration of groundwater levels in overexploited aquifers, the maximization of natural storage capacity of aquifers, the improvement of water quality, the design and operational optimization of MAR schemes, clogging development and risk assessment. The platform contains a collection of about 35 web-based tools of various degrees of complexity, which are either included in application specific workflows or used as standalone modelling instruments. Among them are simple tools derived from data mining and empirical equations, analytical groundwater related equations, as well as complex numerical flow and transport models (MODFLOW, MT3DMS and SEAWAT). Up to now, the simulation core of the INOWAS-DSS, which is based on the finite differences groundwater flow model MODFLOW, is implemented and runs on the web. A scenario analyser helps to easily set up and evaluate new management options as well as future development such as land use and climate change and compare them to previous scenarios. Additionally simple tools such as analytical equations to assess saltwater intrusion are already running online

  1. Design and implementation of an ERP platform as practice environment for learning in Operations Management

    Directory of Open Access Journals (Sweden)

    Juan Manuel Maqueira Marín

    2017-06-01

    Full Text Available Given the increasing business use of Enterprise Resource Planning (ERP software, it is necessary to have such platforms for application in the teaching-learning process in Operations Management. However, the implementation of commercial solutions is not adequate due to its high cost and to exceed the conceptual learning function, which is the main objective of this software tool with the students of Operations Management. Due to this, in this work we present the design and implementation of an ERP platform based on Open Source software and virtualization technologies. The designed platform provides an economical and adequate solution for the conceptual teaching of ERP software through the development of practices that allows students to learn the operation of an ERP and modules such as inventory management, purchasing management or sales management, among others.

  2. Architectural Blueprint for Plate Boundary Observatories based on interoperable Data Management Platforms

    Science.gov (United States)

    Kerschke, D. I.; Häner, R.; Schurr, B.; Oncken, O.; Wächter, J.

    2014-12-01

    Interoperable data management platforms play an increasing role in the advancement of knowledge and technology in many scientific disciplines. Through high quality services they support the establishment of efficient and innovative research environments. Well-designed research environments can facilitate the sustainable utilization, exchange, and re-use of scientific data and functionality by using standardized community models. Together with innovative 3D/4D visualization, these concepts provide added value in improving scientific knowledge-gain, even across the boundaries of disciplines. A project benefiting from the added value is the Integrated Plate boundary Observatory in Chile (IPOC). IPOC is a European-South American network to study earthquakes and deformation at the Chilean continental margin and to monitor the plate boundary system for capturing an anticipated great earthquake in a seismic gap. In contrast to conventional observatories that monitor individual signals only, IPOC captures a large range of different processes through various observation methods (e.g., seismographs, GPS, magneto-telluric sensors, creep-meter, accelerometer, InSAR). For IPOC a conceptual design has been devised that comprises an architectural blueprint for a data management platform based on common and standardized data models, protocols, and encodings as well as on an exclusive use of Free and Open Source Software (FOSS) including visualization components. Following the principles of event-driven service-oriented architectures, the design enables novel processes by sharing and re-using functionality and information on the basis of innovative data mining and data fusion technologies. This platform can help to improve the understanding of the physical processes underlying plate deformations as well as the natural hazards induced by them. Through the use of standards, this blueprint can not only be facilitated for other plate observing systems (e.g., the European Plate

  3. An automated synthesis-purification-sample-management platform for the accelerated generation of pharmaceutical candidates.

    Science.gov (United States)

    Sutherland, J David; Tu, Noah P; Nemcek, Thomas A; Searle, Philip A; Hochlowski, Jill E; Djuric, Stevan W; Pan, Jeffrey Y

    2014-04-01

    A flexible and integrated flow-chemistry-synthesis-purification compound-generation and sample-management platform has been developed to accelerate the production of small-molecule organic-compound drug candidates in pharmaceutical research. Central to the integrated system is a Mitsubishi robot, which hands off samples throughout the process to the next station, including synthesis and purification, sample dispensing for purity and quantification analysis, dry-down, and aliquot generation.

  4. Adaptive Embedded Systems – Challenges of Run-Time Resource Management

    DEFF Research Database (Denmark)

    Understanding and efficiently controlling the dynamic behavior of adaptive embedded systems is a challenging endavor. The challenges come from the often very complicated interplay between the application, the application mapping, and the underlying hardware architecture. With MPSoC, we have...... the technology to design and fabricate dynamically reconfigurable hardware platforms. However, such platforms will pose new challenges to tools and methods to efficiently explore these platforms at run-time. This talk will address some of the challenges of run-time resource management in adaptive embedded...... systems....

  5. Navigation and Positioning System Using High Altitude Platforms Systems (HAPS)

    Science.gov (United States)

    Tsujii, Toshiaki; Harigae, Masatoshi; Harada, Masashi

    Recently, some countries have begun conducting feasibility studies and R&D projects on High Altitude Platform Systems (HAPS). Japan has been investigating the use of an airship system that will function as a stratospheric platform for applications such as environmental monitoring, communications and broadcasting. If pseudolites were mounted on the airships, their GPS-like signals would be stable augmentations that would improve the accuracy, availability, and integrity of GPS-based positioning systems. Also, the sufficient number of HAPS can function as a positioning system independent of GPS. In this paper, a system design of the HAPS-based positioning system and its positioning error analyses are described.

  6. Spatial service delivery system for smart licensing & enforcement management

    Science.gov (United States)

    Wahap, N. A.; Ismail, N. M.; Nor, N. M.; Ahmad, N.; Omar, M. F.; Termizi, A. A. A.; Zainal, D.; Noordin, N. M.; Mansor, S.

    2016-06-01

    Spatial information has introduced a new sense of urgency for a better understanding of the public needs in term of what, when and where they need services and through which devices, platform or physical locations they need them. The objective of this project is to value- add existing license management process for business premises which comes under the responsibility of Local Authority (PBT). Manipulation of geospatial and tracing technology via mobile platform allows enforcement officers to work in real-time, use a standardized system, improve service delivery, and optimize operation management. This paper will augment the scope and capabilities of proposed concept namely, Smart Licensing/Enforcement Management (SLEm). It will review the current licensing and enforcement practice of selected PBT in comparison to the enhanced method. As a result, the new enhanced system is expected to offer a total solution for licensing/enforcement management whilst increasing efficiency and transparency for smart city management and governance.

  7. Autonomous micro-platform for multisensors with an advanced power management unit (PMU

    Directory of Open Access Journals (Sweden)

    P. Bellier

    2018-04-01

    Full Text Available In this work, we developed and characterised an autonomous micro-platform including several types of sensors, an advanced power management unit (PMU and radio frequency (RF transmission capabilities. Autonomy requires integration of an energy harvester, an energy storage device, a PMU, ultra-low-power components (including sensors and optimized software. Our choice was to use commercial off-the-shelf components with low-power consumption, low cost and compactness as selection criteria. For the multi-purpose micro-platform, we choose to include the most common sensors (such as temperature, humidity, luminosity, acceleration, etc. and to integrate them in one miniaturised autonomous device.A processing unit is embedded in the system. It allows for data acquisition from each sensor individually, simple data processing, and storing and/or wireless data transmission. Such a system can be used as stand-alone, with an internal storage in a non-volatile memory, or as a node in a wireless network, with bi-directional communication with a hub device where data can be analysed further. According to specific application requirements, system settings can be adjusted, such as the sampling rate, the resolution and the processing of the sensor data.Parallel to full autonomous functionality, the low-power design enables us to power the system by a small battery leading to a high degree of autonomy at a high sampling rate. Therefore, we also developed an alternative battery-powered version of the micro-platform that increases the range of applications. As such, the system is highly versatile and due to its reduced dimensions, it can be used nearly everywhere. Typical applications include the Internet of Things, Industry 4.0, home automation and building structural health monitoring.

  8. Hybrid causal methodology and software platform for probabilistic risk assessment and safety monitoring of socio-technical systems

    Energy Technology Data Exchange (ETDEWEB)

    Groth, Katrina, E-mail: kgroth@umd.ed [Center for Risk and Reliability, 0151 Glenn L. Martin Hall, University of Maryland, College Park, MD 20742 (United States); Wang Chengdong; Mosleh, Ali [Center for Risk and Reliability, 0151 Glenn L. Martin Hall, University of Maryland, College Park, MD 20742 (United States)

    2010-12-15

    This paper introduces an integrated framework and software platform for probabilistic risk assessment (PRA) and safety monitoring of complex socio-technical systems. An overview of the three-layer hybrid causal logic (HCL) modeling approach and corresponding algorithms, implemented in the Trilith software platform, are provided. The HCL approach enhances typical PRA methods by quantitatively including the influence of soft causal factors introduced by human and organizational aspects of a system. The framework allows different modeling techniques to be used for different aspects of the socio-technical system. The HCL approach combines the power of traditional event sequence diagram (ESD)event tree (ET) and fault tree (FT) techniques for modeling deterministic causal paths, with the flexibility of Bayesian belief networks for modeling non-deterministic cause-effect relationships among system elements (suitable for modeling human and organizational influences). Trilith enables analysts to construct HCL models and perform quantitative risk assessment and management of complex systems. The risk management capabilities included are HCL-based risk importance measures, hazard identification and ranking, precursor analysis, safety indicator monitoring, and root cause analysis. This paper describes the capabilities of the Trilith platform and power of the HCL algorithm by use of example risk models for a type of aviation accident (aircraft taking off from the wrong runway).

  9. Hybrid causal methodology and software platform for probabilistic risk assessment and safety monitoring of socio-technical systems

    International Nuclear Information System (INIS)

    Groth, Katrina; Wang Chengdong; Mosleh, Ali

    2010-01-01

    This paper introduces an integrated framework and software platform for probabilistic risk assessment (PRA) and safety monitoring of complex socio-technical systems. An overview of the three-layer hybrid causal logic (HCL) modeling approach and corresponding algorithms, implemented in the Trilith software platform, are provided. The HCL approach enhances typical PRA methods by quantitatively including the influence of soft causal factors introduced by human and organizational aspects of a system. The framework allows different modeling techniques to be used for different aspects of the socio-technical system. The HCL approach combines the power of traditional event sequence diagram (ESD)event tree (ET) and fault tree (FT) techniques for modeling deterministic causal paths, with the flexibility of Bayesian belief networks for modeling non-deterministic cause-effect relationships among system elements (suitable for modeling human and organizational influences). Trilith enables analysts to construct HCL models and perform quantitative risk assessment and management of complex systems. The risk management capabilities included are HCL-based risk importance measures, hazard identification and ranking, precursor analysis, safety indicator monitoring, and root cause analysis. This paper describes the capabilities of the Trilith platform and power of the HCL algorithm by use of example risk models for a type of aviation accident (aircraft taking off from the wrong runway).

  10. Feasibility of an Extended-Duration Aerial Platform Using Autonomous Multi-Rotor Vehicle Swapping and Battery Management

    Science.gov (United States)

    2017-12-01

    AN EXTENDED-DURATION AERIAL PLATFORM USING AUTONOMOUS MULTI-ROTOR VEHICLE SWAPPING AND BATTERY MANAGEMENT by Alexander G. Williams December...Arlington, VA 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington DC 20503. 1. AGENCY USE ONLY...DURATION AERIAL PLATFORM USING AUTONOMOUS MULTI-ROTOR VEHICLE SWAPPING AND BATTERY MANAGEMENT 5. FUNDING NUMBERS 6. AUTHOR(S) Alexander G

  11. Linked Heritage: a collaborative terminology management platform for a network of multilingual thesauri and controlled vocabularies

    Directory of Open Access Journals (Sweden)

    Marie-Veronique Leroi

    2013-01-01

    Full Text Available Terminology and multilingualism have been one of the main focuses of the Athena Project. Linked Heritage as a legacy of this project also deals with terminology and bring theory to practice applying the recommendations given in the Athena Project. Linked Heritage as a direct follow-up of these recommendations on terminology and multilingualism is currently working on the development of a Terminology Management Platform (TMP. This platform will allow any cultural institution to register, SKOSify and manage its terminology in a collaborative way. This Terminology Management Platform will provide a network of multilingual and cross-domain terminologies.

  12. SAR system development for UAV multicopter platforms

    OpenAIRE

    Escartin Martínez, Antonio

    2015-01-01

    SAR system development for UAV multicopter platforms This thesis describes the optimization of a synthetic aperture radar (SAR) at X-band and its integration into an unmanned aerial vehicle (UAV) of type octocopter. For such optimization the SAR system functionality was extended from singlepol to fulpol and it has been optimized at hardware level in order to improve its quality against noise figure. After its integration into the octocopter platform, its features has been used in order to ...

  13. Redefining Project Management Information Systems with New IT Services

    Directory of Open Access Journals (Sweden)

    Luminita Hurbean

    2013-04-01

    Full Text Available Achieving successful adoption of an innovative project management information system should involve influencing the project management environment by providing useful tools, training, reusable templates, techniques, and methods that improve the project manager's ability to successfully execute. This paper suggests that project management practice, enabled by emerging IT, could more explicitly recognize, represent, and manage the interdependencies that are pervasive throughout projects, thereby fully exploiting the potential of the IT to improve overall project performance. The last few years IT&C evolution led to new approaches to application and infrastructure architecture. Breaking from the traditional procedures used by organizations, they propose a cloud operating platform that reduces complexity and improves agility and scalability by altering the approach to the way data centres are built, applications are developed, infrastructure is managed, and organizations align and collaborate. Further, the paper explores the growing impact of mobile computing, cloud delivery and social business collaboration project management information systems and proposes a shift of a Five C’s for information systems in a cloud based operating platform, driven by cooperation, teamwork and continuous improvement.The proposed shift in the cloud indicates actual tools that may be adopted for better collaboration and higher business value of the project information management.

  14. Feasibility of an interactive ICT-platform for early assessment and management of patient-reported symptoms during radiotherapy for prostate cancer.

    Science.gov (United States)

    Sundberg, Kay; Eklöf, Ann Langius; Blomberg, Karin; Isaksson, Ann-Kristin; Wengström, Yvonne

    2015-10-01

    The aim of this study was to test the feasibility and acceptability of an Information and Communication Technology platform for assessing and managing patient reported symptoms during radiotherapy for prostate cancer. In cooperation with a health management company, using a patient experience co-design, we developed the platform operated by an interactive application for reporting and managing symptoms in real time. Nine patients diagnosed with prostate cancer and receiving radiotherapy were recruited from two university hospitals in Sweden. Evidence-based symptoms and related self-care advice specific to prostate cancer were implemented in the application based on a literature review and interviews with patients and health care professionals. In the test of the platform the patients reported symptoms, via a mobile phone, daily for two weeks and were afterwards interviewed about their experiences. Overall, the patients found the symptom questionnaire and the self-care advice relevant and the application user friendly. The alert system was activated on several occasions when the symptoms were severe leading to a nurse contact and support so the patients felt safe and well cared for. The platform enabled increased patient involvement and facilitated symptom assessment and communication between the patient and the health care provider. The study's results support further development of the platform, as well as tests in full-scale studies and in other populations. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture.

    Science.gov (United States)

    Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

    2017-09-16

    In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

  16. Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

    Science.gov (United States)

    Zheng, Song; Zhang, Qi; Zheng, Rong; Huang, Bi-Qin; Song, Yi-Lin; Chen, Xin-Chu

    2017-01-01

    In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome) based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices. PMID:28926957

  17. Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

    Directory of Open Access Journals (Sweden)

    Song Zheng

    2017-09-01

    Full Text Available In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main contribution of this paper is to propose a universal smart home control platform architecture (IAPhome based on a multi-agent system and communication middleware, which shows significant adaptability and advantages in many aspects, including heterogeneous devices connectivity, collaborative control, human-computer interaction and user self-management. The communication middleware is an important foundation to design and implement this architecture which makes it possible to integrate heterogeneous smart devices in a flexible way. A concrete method of applying the multi-agent software technique to solve the integrated control problem of the smart home system is also presented. The proposed platform architecture has been tested in a real smart home environment, and the results indicate that the effectiveness of our approach for solving the collaborative control problem of different smart devices.

  18. Operational Management System for Regulated Water Systems

    Science.gov (United States)

    van Loenen, A.; van Dijk, M.; van Verseveld, W.; Berger, H.

    2012-04-01

    Most of the Dutch large rivers, canals and lakes are controlled by the Dutch water authorities. The main reasons concern safety, navigation and fresh water supply. Historically the separate water bodies have been controlled locally. For optimizating management of these water systems an integrated approach was required. Presented is a platform which integrates data from all control objects for monitoring and control purposes. The Operational Management System for Regulated Water Systems (IWP) is an implementation of Delft-FEWS which supports operational control of water systems and actively gives advice. One of the main characteristics of IWP is that is real-time collects, transforms and presents different types of data, which all add to the operational water management. Next to that, hydrodynamic models and intelligent decision support tools are added to support the water managers during their daily control activities. An important advantage of IWP is that it uses the Delft-FEWS framework, therefore processes like central data collection, transformations, data processing and presentation are simply configured. At all control locations the same information is readily available. The operational water management itself gains from this information, but it can also contribute to cost efficiency (no unnecessary pumping), better use of available storage and advise during (water polution) calamities.

  19. Product Platform Replacements

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2012-01-01

    . To shed light on this unexplored and growing managerial concern, the purpose of this explorative study is to identify operational challenges to management when product platforms are replaced. Design/methodology/approach – The study uses a longitudinal field-study approach. Two companies, Gamma and Omega...... replacement was chosen in each company. Findings – The study shows that platform replacements primarily challenge managers' existing knowledge about platform architectures. A distinction can be made between “width” and “height” in platform replacements, and it is crucial that managers observe this in order...... to challenge their existing knowledge about platform architectures. Issues on technologies, architectures, components and processes as well as on segments, applications and functions are identified. Practical implications – Practical implications are summarized and discussed in relation to a framework...

  20. Electrical distribution system management

    International Nuclear Information System (INIS)

    Hajos, L.; Mortarulo, M.; Chang, K.; Sparks, T.

    1990-01-01

    This paper reports that maintenance of electrical system data is essential to the operation, maintenance, and modification of a nuclear station. Load and equipment changes affect equipment sizing, available short-circuit currents and protection coordination. System parameters must be maintained in a controlled manner to enable evaluation of proposed modifications and provide adequate verification and traceability. For this purpose, Public Service Electric and Gas Company has implemented a Verified and Validated Electric Distribution System Management (EDSM) program at the Hope Creek and Salem Nuclear Power Stations. EDSM program integrates computerized configuration management of electrical systems with calculational software the Technical Standard procedures. The software platform is PC-based. The Database Manager and Calculational programs have been linked together through a user friendly menu system. The database management nodule enable s assembly and maintenance of databases for individual loads, buses, and branches within the electrical systems with system access and approval controlled through electronic security incorporated within the database manger. Reports drawn from the database serve as the as-built and/or as-designed record of the system configurations. This module also creates input data files of network parameters in a format readable by the calculational modules. Calculations modules provide load flow, voltage drop, motor starting, and short-circuit analyses, as well as dynamic analyses of bus transfers

  1. A Lightweight Web of Things Open Platform to Facilitate Context Data Management and Personalized Healthcare Services Creation

    Directory of Open Access Journals (Sweden)

    Iván Corredor

    2014-04-01

    Full Text Available In the last few years, many health monitoring systems have been designed to fullfil the needs of a large range of scenarios. Although many of those systems provide good ad hoc solutions, most of them lack of mechanisms that allow them to be easily reused. This paper is focused on describing an open platform, the micro Web of Things Open Platform (µWoTOP, which has been conceived to improve the connectivity and reusability of context data to deliver different kinds of health, wellness and ambient home care services. µWoTOP is based on a resource-oriented architecture which may be embedded in mobile and resource constrained devices enabling access to biometric, ambient or activity sensors and actuator resources through uniform interfaces defined according to a RESTful fashion. Additionally, µWoTOP manages two communication modes which allow delivering user context information according to different methods, depending on the requirements of the consumer application. It also generates alert messages based on standards related to health care and risk management, such as the Common Alerting Protocol, in order to make its outputs compatible with existing systems.

  2. Innovative and applied research on big data platforms of smart heritage

    Science.gov (United States)

    Qiu, J.; Li, J.; Sun, H.

    2015-08-01

    Big data has huge commercial value and potential. Under the background of big data, a heritage site is faced with a number of questions and challenges such as, how to accelerate industrial innovation, benign competition and the creation of new business value. Based on the analysis of service data from the national archaeological site and park, Yuan Ming Yuan, this paper investigates the common problems of site management operations such as, inappropriate cultural interpretation, insufficient consumer demand and so on. In order to solve these operational problems, a new service system called the "one platform - three systems" was put forward. This system includes the smart heritage platform and three management systems: the smart heritage management system, the 3-O (Online-Offline-Onsite) service system and the digital explanation system. Combined with the 3-O marketing operation, the platform can realize bidirectional interaction between heritage site management units and tourists, which can also benefit visitors to the heritage site by explaining the culture and history of the heritage site, bring about more demand for cultural information and expand the social and economic benefits.

  3. A resilient and secure software platform and architecture for distributed spacecraft

    Science.gov (United States)

    Otte, William R.; Dubey, Abhishek; Karsai, Gabor

    2014-06-01

    A distributed spacecraft is a cluster of independent satellite modules flying in formation that communicate via ad-hoc wireless networks. This system in space is a cloud platform that facilitates sharing sensors and other computing and communication resources across multiple applications, potentially developed and maintained by different organizations. Effectively, such architecture can realize the functions of monolithic satellites at a reduced cost and with improved adaptivity and robustness. Openness of these architectures pose special challenges because the distributed software platform has to support applications from different security domains and organizations, and where information flows have to be carefully managed and compartmentalized. If the platform is used as a robust shared resource its management, configuration, and resilience becomes a challenge in itself. We have designed and prototyped a distributed software platform for such architectures. The core element of the platform is a new operating system whose services were designed to restrict access to the network and the file system, and to enforce resource management constraints for all non-privileged processes Mixed-criticality applications operating at different security labels are deployed and controlled by a privileged management process that is also pre-configuring all information flows. This paper describes the design and objective of this layer.

  4. Management and control applications in Agriculture domain via a Future Internet Business-to-Business platform

    Directory of Open Access Journals (Sweden)

    Sokratis Barmpounakis

    2015-05-01

    Full Text Available The Agriculture business domain, as a vital part of the overall supply chain, is expected to highly evolve in the upcoming years via the developments, which are taking place on the side of the Future Internet. This paper presents a novel Business-to-Business collaboration platform from the agri-food sector perspective, which aims to facilitate the collaboration of numerous stakeholders belonging to associated business domains, in an effective and flexible manner. The contemporary B2B collaboration schemes already place the requirements for swift deployment of cloud applications, capable of both integrating diverse legacy systems, as well as developing in a rapid way new services and systems, which will be able to instantly communicate and provide complete, “farm-to-fork” solutions for farmers, agri-food and logistics service providers, ICT companies, end-product producers, etc. To this end, this conceptual paper describes how these requirements are addressed via the FIspace B2B platform, focusing on the Greenhouse Management & Control scenarios.

  5. Multi-source remote sensing data management system

    International Nuclear Information System (INIS)

    Qin Kai; Zhao Yingjun; Lu Donghua; Zhang Donghui; Wu Wenhuan

    2014-01-01

    In this thesis, the author explored multi-source management problems of remote sensing data. The main idea is to use the mosaic dataset model, and the ways of an integreted display of image and its interpretation. Based on ArcGIS and IMINT feature knowledge platform, the author used the C# and other programming tools for development work, so as to design and implement multi-source remote sensing data management system function module which is able to simply, conveniently and efficiently manage multi-source remote sensing data. (authors)

  6. MyDiabetesMyWay: An Evolving National Data Driven Diabetes Self-Management Platform.

    Science.gov (United States)

    Wake, Deborah J; He, Jinzhang; Czesak, Anna Maria; Mughal, Fezan; Cunningham, Scott G

    2016-09-01

    MyDiabetesMyWay (MDMW) is an award-wining national electronic personal health record and self-management platform for diabetes patients in Scotland. This platform links multiple national institutional and patient-recorded data sources to provide a unique resource for patient care and self-management. This review considers the current evidence for online interventions in diabetes and discusses these in the context of current and ongoing developments for MDMW. Evaluation of MDMW through patient reported outcomes demonstrates a positive impact on self-management. User feedback has highlighted barriers to uptake and has guided platform evolution from an education resource website to an electronic personal health record now encompassing remote monitoring, communication tools and personalized education links. Challenges in delivering digital interventions for long-term conditions include integration of data between institutional and personal recorded sources to perform big data analytics and facilitating technology use in those with disabilities, low digital literacy, low socioeconomic status and in minority groups. The potential for technology supported health improvement is great, but awareness and adoption by health workers and patients remains a significant barrier. © 2016 Diabetes Technology Society.

  7. The SEEK: a platform for sharing data and models in systems biology.

    Science.gov (United States)

    Wolstencroft, Katy; Owen, Stuart; du Preez, Franco; Krebs, Olga; Mueller, Wolfgang; Goble, Carole; Snoep, Jacky L

    2011-01-01

    Systems biology research is typically performed by multidisciplinary groups of scientists, often in large consortia and in distributed locations. The data generated in these projects tend to be heterogeneous and often involves high-throughput "omics" analyses. Models are developed iteratively from data generated in the projects and from the literature. Consequently, there is a growing requirement for exchanging experimental data, mathematical models, and scientific protocols between consortium members and a necessity to record and share the outcomes of experiments and the links between data and models. The overall output of a research consortium is also a valuable commodity in its own right. The research and associated data and models should eventually be available to the whole community for reuse and future analysis. The SEEK is an open-source, Web-based platform designed for the management and exchange of systems biology data and models. The SEEK was originally developed for the SysMO (systems biology of microorganisms) consortia, but the principles and objectives are applicable to any systems biology project. The SEEK provides an index of consortium resources and acts as gateway to other tools and services commonly used in the community. For example, the model simulation tool, JWS Online, has been integrated into the SEEK, and a plug-in to PubMed allows publications to be linked to supporting data and author profiles in the SEEK. The SEEK is a pragmatic solution to data management which encourages, but does not force, researchers to share and disseminate their data to community standard formats. It provides tools to assist with management and annotation as well as incentives and added value for following these recommendations. Data exchange and reuse rely on sufficient annotation, consistent metadata descriptions, and the use of standard exchange formats for models, data, and the experiments they are derived from. In this chapter, we present the SEEK platform

  8. The design of remote participation platform for EAST plasma control

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Q.P., E-mail: qpyuan@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Xiao, B.J. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science & Technology of China, Hefei (China); Zhang, R.R. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Chai, W.T.; Liu, J.; Xiao, R.; Zhou, Z.C.; Pei, X.F. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); University of Science & Technology of China, Hefei (China)

    2016-11-15

    Highlights: • The remote participation platform for EAST plasma control is composed of real time control service and scenario management. • The web based interface has been developed for supporting remote participation. • The functionality module has been designed and assistant tools have been developed. - Abstract: EAST has become a physics experimental platform for high parameter and steady-state long-pulse plasma operation. A new remote participation platform for EAST plasma control is designed, which is composed of gatekeeper system, web-based user interface system, discharge scenario management system, online simulation system and data interface with on-site plasma control system (PCS). The identification and access privilege of remote participator is validated by the gatekeeper system. Only authorized users can set control parameters for next shot plasma control or making discharge scenario for future shot through WebPCS which is a web-based user interface and designed based on B/S structure. The systematic architecture design and preliminary deployment of such remote platform will be presented in this paper.

  9. Moodle vs. Social Media Platforms

    DEFF Research Database (Denmark)

    Gulieva, Valeria

    Given the competition coming from various social media platforms, it is explored in this paper how students could be encouraged to use Moodle more proactively during their studies. Moodle is a course management system for online learning. It is designed to be a flexible template-based system, which......, known and widely used social platforms. It might be also due to the fact that students do not see the benefits in investing time and efforts in learning the new system. Another reason might be the mandatory nature of Moodle, i.e., it is imposed on students, rather than a free choice – and this might...

  10. UNIVERSAL MANAGEMENT SYSTEM OF EDUCATIONAL RESOURCES OF THE KHMARA’S SCIENTIFIC RESEARCH PROJECT OF OPEN EDUCATION

    Directory of Open Access Journals (Sweden)

    Volodymyr I. Bessarabov

    2013-12-01

    Full Text Available The article is devoted to actual problems of the choice of technological platform and creation of a universal system of management of educational resources. The advantages of cloud technologies of distributed computing compared to server-side technologies for the purpose of creating a universal system of management of educational resources are shown. The choice of the service Google Apps for Education as a technological basis for constructing the system of management of educational resources was substantiated. It is concluded about the high efficiency of cloud technologies for creating the universal system of management of educational resources to integrate education and training on a single technology platform in projects of open education.

  11. A platform for quality management in research institutes (part II

    Directory of Open Access Journals (Sweden)

    Klembalska Agnieszka

    2016-09-01

    Full Text Available In the recent years there has been a particularly strong pressure on changing old structures and management models in research institutes. Contemporary research institutes are scientific units which are commercial in character – almost 80% of funds come from companies and contractual research activity and services. They are the basic sector of science aiming at cooperation with the economy, applied and innovative research. In order to maintain the current and start new cooperation it is necessary to pay particular attention to maintaining, improving and exposing high level of quality of conducted activity. Taking into consideration the necessity of carrying out ever more complex research projects, conducting activity requiring fast reaction to change, risk analysis, which is assessed every year by the Ministry of Science and Higher Education – it seems that it is necessary to apply tools supporting the assessment of quality. In the proposed three-aspect perspective the following scopes of activity are emphasized: implemented quality management systems, area of scientific information and the sphere of cooperation with the client. This article constitutes the continuation of the subjects discussed in the first part – an extension of issues associated with the scope of responsibilities of particular Sections of the proposed Quality Management Platform in research institutes.

  12. Asset Management System through the design of a Jadex Agent System

    Directory of Open Access Journals (Sweden)

    Javier CARBÓ

    2016-11-01

    Full Text Available In this paper we have designed an agent system using JADEX platform in order to facilitate the asset management of an institution with several types of assets with some unknown similarities, and a high number of operators. Such environment would justify the use of a recommendation system that would provide an useful plan to be applied over an asset generated from previous maintenance operations hold over other assets. Here we provide the full design of such agent system, including the ontology, beliefs, plans, protocols and goals. This design has been implemented within GAIA: an information & asset management solution developed by Altran.

  13. Joint Data Management on ICDP Projects and IODP Mission Specific Platform Expeditions

    Directory of Open Access Journals (Sweden)

    Frank Krysiak

    2007-03-01

    Full Text Available Data management in the Integrated Ocean Drilling Program (IODP and the International Continental Scientific Drilling Program (ICDP supports two functions: firstly, the capture of drilling and scientific data and secondly, the longterm storage and dissemination of these data. The data capture in both ICDP projects and IODP-Mission Specific Platform (MSP expeditions takes place in two phases. During the drilling phase, drilling, curation, logging, andbasic scientific data are captured at the drill site. In the postdrilling phase the detailed measurements, descriptions, images and log data for the split cores are captured within a laboratory setting and the data subsequently transferred to the long-term data storage system. Here we show how a flexible and modular designed information system has been developed over the course of continental and ocean drilling projects.

  14. JobCenter: an open source, cross-platform, and distributed job queue management system optimized for scalability and versatility.

    Science.gov (United States)

    Jaschob, Daniel; Riffle, Michael

    2012-07-30

    Laboratories engaged in computational biology or bioinformatics frequently need to run lengthy, multistep, and user-driven computational jobs. Each job can tie up a computer for a few minutes to several days, and many laboratories lack the expertise or resources to build and maintain a dedicated computer cluster. JobCenter is a client-server application and framework for job management and distributed job execution. The client and server components are both written in Java and are cross-platform and relatively easy to install. All communication with the server is client-driven, which allows worker nodes to run anywhere (even behind external firewalls or "in the cloud") and provides inherent load balancing. Adding a worker node to the worker pool is as simple as dropping the JobCenter client files onto any computer and performing basic configuration, which provides tremendous ease-of-use, flexibility, and limitless horizontal scalability. Each worker installation may be independently configured, including the types of jobs it is able to run. Executed jobs may be written in any language and may include multistep workflows. JobCenter is a versatile and scalable distributed job management system that allows laboratories to very efficiently distribute all computational work among available resources. JobCenter is freely available at http://code.google.com/p/jobcenter/.

  15. The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

    Science.gov (United States)

    Zhu, Wenmin; Jia, Yuanhua

    2018-01-01

    Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

  16. Platform development for merging various information sources for water management: methodological, technical and operational aspects

    Science.gov (United States)

    Galvao, Diogo

    2013-04-01

    As a result of various economic, social and environmental factors, we can all experience the increase in importance of water resources at a global scale. As a consequence, we can also notice the increasing need of methods and systems capable of efficiently managing and combining the rich and heterogeneous data available that concerns, directly or indirectly, these water resources, such as in-situ monitoring station data, Earth Observation images and measurements, Meteorological modeling forecasts and Hydrological modeling. Under the scope of the MyWater project, we developed a water management system capable of satisfying just such needs, under a flexible platform capable of accommodating future challenges, not only in terms of sources of data but also on applicable models to extract information from it. From a methodological point of view, the MyWater platform obtains data from distinct sources, and in distinct formats, be they Satellite images or meteorological model forecasts, transforms and combines them in ways that allow them to be fed to a variety of hydrological models (such as MOHID Land, SIMGRO, etc…), which themselves can also be combined, using such approaches as those advocated by the OpenMI standard, to extract information in an automated and time efficient manner. Such an approach brings its own deal of challenges, and further research was developed under this project on the best ways to combine such data and on novel approaches to hydrological modeling (like the PriceXD model). From a technical point of view, the MyWater platform is structured according to a classical SOA architecture, with a flexible object oriented modular backend service responsible for all the model process management and data treatment, while the information extracted can be interacted with using a variety of frontends, from a web portal, including also a desktop client, down to mobile phone and tablet applications. From an operational point of view, a user can not only see

  17. Oceans 2.0: a Data Management Infrastructure as a Platform

    Science.gov (United States)

    Pirenne, B.; Guillemot, E.

    2012-04-01

    Oceans 2.0: a Data Management Infrastructure as a Platform Benoît Pirenne, Associate Director, IT, NEPTUNE Canada Eric Guillemot, Manager, Software Development, NEPTUNE Canada The Data Management and Archiving System (DMAS) serving the needs of a number of undersea observing networks such as VENUS and NEPTUNE Canada was conceived from the beginning as a Service-Oriented Infrastructure. Its core functional elements (data acquisition, transport, archiving, retrieval and processing) can interact with the outside world using Web Services. Those Web Services can be exploited by a variety of higher level applications. Over the years, DMAS has developed Oceans 2.0: an environment where these techniques are implemented. The environment thereby becomes a platform in that it allows for easy addition of new and advanced features that build upon the tools at the core of the system. The applications that have been developed include: data search and retrieval, including options such as data product generation, data decimation or averaging, etc. dynamic infrastructure description (search all observatory metadata) and visualization data visualization, including dynamic scalar data plots, integrated fast video segment search and viewing Building upon these basic applications are new concepts, coming from the Web 2.0 world that DMAS has added: They allow people equipped only with a web browser to collaborate and contribute their findings or work results to the wider community. Examples include: addition of metadata tags to any part of the infrastructure or to any data item (annotations) ability to edit and execute, share and distribute Matlab code on-line, from a simple web browser, with specific calls within the code to access data ability to interactively and graphically build pipeline processing jobs that can be executed on the cloud web-based, interactive instrument control tools that allow users to truly share the use of the instruments and communicate with each other and last

  18. Proof-of-Concept Prototyping for Observis Platform

    OpenAIRE

    Ekimov, Victor

    2012-01-01

    Observis Oy is a start-up company first appeared in January 2011. The company is building up a measurement platform that is open and easy to connect. It helps measurement device suppliers, system and service providers, and analyzing services to found and combine each other’s products to create more value to the end customers. Observis Oy intends to develop a platform for integration with other services in order to provide management functionality in environmental field of business. Platform i...

  19. The role of interactive control systems in obtaining internal consistency in the management control system package

    DEFF Research Database (Denmark)

    Toldbod, Thomas; Israelsen, Poul

    2014-01-01

    Companies rely on multiple Management Control Systems to obtain their short and long term objectives. When applying a multifaceted perspective on Management Control System the concept of internal consistency has been found to be important in obtaining goal congruency in the company. However, to d...... management is aware of this shortcoming they use the cybernetic controls more interactively to overcome this shortcoming, whereby the cybernetic controls are also used as a learning platform and not just for performance control....

  20. The Development and Empirical Evaluation of the Korean Smart Distribution Management System

    Directory of Open Access Journals (Sweden)

    Sang-Yun Yun

    2014-03-01

    Full Text Available This paper introduces the development and actual test results of the Korean Smart Distribution Management System (KSDMS. The KSDMS has been designed and developed to cope with the lack of interconnection capability of the Dispersed Energy Resource (DER, to provide standardization and compatibility, and to implement automatic processing of service restoration, in the existing Distribution Automation System (DAS in Korea. First, real-time system analysis and control application programs were developed, to solve the problems of the existing DAS; and the Distribution Management System (DMS platform was developed, to run the developed application programs. Second, international standard-based communication, platform, and database structures were adopted, for standardization and compatibility. Third, a platform and application program functions were developed to process faults automatically; and a communication device and an intelligent electronic device (IED were developed to automate fault restoration, through communication between devices. The KSDMS was evaluated by three tests: unit function test, platform and application program integration test, and empirical test. The first two were conducted on both small and large demonstration systems. The empirical test was performed at the Power Testing Center (PTC in Gochang, and on a real system, at the Korea Electric Power Corporation (KEPCO, on Jeju Island. The test results verified that the KSDMS can actively resolve the problems of the existing DAS.

  1. Production Platform Development Through the Four Loops of Concern

    DEFF Research Database (Denmark)

    Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

    2017-01-01

    Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers...

  2. Design of intelligent power consumption optimization and visualization management platform for large buildings based on internet of things

    Directory of Open Access Journals (Sweden)

    Gong Shulan

    2017-01-01

    Full Text Available The buildings provide a significant contribution to total energy consumption and CO2 emission. It has been estimated that the development of an intelligent power consumption monitor and control system will result in about 30% savings in energy consumption. This design innovatively integrates the advanced technologies such as the internet of things, the internet, intelligent buildings and intelligent electricity which can offer open, efficient, convenient energy consumption detection platform in demand side and visual management demonstration application platform in power enterprises side. The system was created to maximize the effective and efficient the use of energy resource. It was development around sensor networks and intelligent gateway and the monitoring center software. This will realize the highly integration and comprehensive application in energy and information to meet the needs with intelligent buildings

  3. Combining UML2 Application and SystemC Platform Modelling for Performance Evaluation of Real-Time Embedded Systems

    Directory of Open Access Journals (Sweden)

    Qu Yang

    2008-01-01

    Full Text Available Abstract Future mobile devices will be based on heterogeneous multiprocessing platforms accommodating several stand-alone applications. The network-on-chip communication and device networking combine the design challenges of conventional distributed systems and resource constrained real-time embedded systems. Interoperable design space exploration for both the application and platform development is required. Application designer needs abstract platform models to rapidly check the feasibility of a new feature or application. Platform designer needs abstract application models for defining platform computation and communication capacities. We propose a layered UML application/workload and SystemC platform modelling approach that allow application and platform to be modelled at several levels of abstraction, which enables early performance evaluation of the resulting system. The overall approach has been experimented with a mobile video player case study, while different load extraction methods have been validated by applying them to MPEG-4 encoder, Quake2 3D game, and MP3 decoder case studies previously.

  4. Industry Platforms and New Industrial Policy in Russia

    Directory of Open Access Journals (Sweden)

    Svetlana V. Orekhova

    2017-12-01

    Full Text Available The article aims at clarifying Russian industrial policy as a result of business models changing and market reconstruction. The research bass on the hypothesis that the choice of the industrial policy administrative measures depends on the object of management. It is important to link government regulation of markets with corporate strategies. We reveal that modern economic systems based on using of electronic technologies, big data, and innovative activity. Technological platforms as the single organizational and economic mechanisms affect economic systems very much. We study the content and main characteristics of a business model, is called the "technological platform". We also identify the main required changes in industrial policy. We analyze the matching between scientific and technological scenarios of the Russian economic development and the technological platform. There are two areas of the new industrial policy. They are: a multi-sectoral approach to regulating and improving the quality of the national institutional environment. The industrial and cluster management approaches are inefficient in modern conditions. There is a need for each platform of its technological development scenario. We also clarify the role of the state in the functioning of technological platforms.

  5. A commercial real-time manufacturing integration platform for the new control system on FTU

    International Nuclear Information System (INIS)

    Panella, M.; Bertocchi, A.; Bozzolan, V.; Buceti, G.; Centioli, C.; Imparato, A.; Mazza, G.; Torelli, C.; Vitale, V.

    1999-01-01

    In 1994 a working group was set up in Frascati to investigate how to build up a new control system for FTU (Frascati tokamak upgrade) considering the evolution in the information technology. Strong emphasis was placed on the use of standard solutions (be they de-facto or de-jure) and commercial platforms where-ever possible. This paper describes our operational experience with the new control system based on the commercial DEC BASEstar family of products. BASEstar is based on client/server computing technologies, providing an environment to collect, process, manage, distribute and integrate real time manufacturing data. UNIX, VMS, PC Win, OS-9 are integrated to handle hosts, PC, VME CPUs. A 4 GL programming language, CIMfast, has been used to handle via automatic procedures the tokamak discharge. X11 standard based mimics are available to display the plants status. A real flexibility of the whole system has been experience and the further use of the this system has been planned for the ITER DTP (divertor test platform). (orig.)

  6. Experimental platforms for behavioral experiments on social-ecological systems

    Directory of Open Access Journals (Sweden)

    Marco A. Janssen

    2014-12-01

    Full Text Available Recently, there has been an increased interest in using behavioral experiments to study hypotheses on the governance of social-ecological systems. A diversity of software tools are used to implement such experiments. We evaluated various publicly available platforms that could be used in research and education on the governance of social-ecological systems. The aims of the various platforms are distinct, and this is noticeable in the differences in their user-friendliness and their adaptability to novel research questions. The more easily accessible platforms are useful for prototyping experiments and for educational purposes to illustrate theoretical concepts. To advance novel research aims, more elaborate programming experience is required to either implement an experiment from scratch or adjust existing experimental software. There is no ideal platform best suited for all possible use cases, but we have provided a menu of options and their associated trade-offs.

  7. Development of fast wireless detection system for fixed offshore platform

    Science.gov (United States)

    Li, Zhigang; Yu, Yan; Jiao, Dong; Wang, Jie; Li, Zhirui; Ou, Jinping

    2011-04-01

    Offshore platforms' security is concerned since in 1950s and 1960s, and in the early 1980s some important specifications and standards are built, and all these provide technical basis of fixed platform design, construction, installation and evaluation. With the condition that more and more platforms are in serving over age, the research about the evaluation and detection technology of offshore platform has been a hotspot, especially underwater detection, and assessment method based on the finite element calculation. For fixed platform structure detection, conventional NDT methods, such as eddy current, magnetic powder, permeate, X-ray and ultrasonic, etc, are generally used. These techniques are more mature, intuitive, but underwater detection needs underwater robot, the necessary supporting tools of auxiliary equipment, and trained professional team, thus resources and cost used are considerable, installation time of test equipment is long. This project presents a new kind of fast wireless detection and damage diagnosis system for fixed offshore platform using wireless sensor networks, that is, wireless sensor nodes can be put quickly on the offshore platform, detect offshore platform structure global status by wireless communication, and then make diagnosis. This system is operated simply, suitable for offshore platform integrity states rapid assessment. The designed system consists in intelligence acquisition equipment and 8 wireless collection nodes, the whole system has 64 collection channels, namely every wireless collection node has eight 16-bit accuracy of A/D channels. Wireless collection node, integrated with vibration sensing unit, embedded low-power micro-processing unit, wireless transceiver unit, large-capacity power unit, and GPS time synchronization unit, can finish the functions such as vibration data collection, initial analysis, data storage, data wireless transmission. Intelligence acquisition equipment, integrated with high

  8. Complex products and Systems: Potential from using layout platforms

    NARCIS (Netherlands)

    Hofer, A.P.; Halman, J.I.M.

    2004-01-01

    In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates

  9. Automatic aeroponic irrigation system based on Arduino’s platform

    Science.gov (United States)

    Montoya, A. P.; Obando, F. A.; Morales, J. G.; Vargas, G.

    2017-06-01

    The recirculating hydroponic culture techniques, as aeroponics, has several advantages over traditional agriculture, aimed to improve the efficiently and environmental impact of agriculture. These techniques require continuous monitoring and automation for proper operation. In this work was developed an automatic monitored aeroponic-irrigation system based on the Arduino’s free software platform. Analog and digital sensors for measuring the temperature, flow and level of a nutrient solution in a real greenhouse were implemented. In addition, the pH and electric conductivity of nutritive solutions are monitored using the Arduino’s differential configuration. The sensor network, the acquisition and automation system are managed by two Arduinos modules in master-slave configuration, which communicate one each other wireless by Wi-Fi. Further, data are stored in micro SD memories and the information is loaded on a web page in real time. The developed device brings important agronomic information when is tested with an arugula culture (Eruca sativa Mill). The system also could be employ as an early warning system to prevent irrigation malfunctions.

  10. A context management system for a cost-efficient smart home platform

    OpenAIRE

    J. Schneider; A. Klein; C. Mannweiler; H. D. Schotten

    2012-01-01

    This paper presents an overview of state-of-the-art architectures for integrating wireless sensor and actuators networks into the Future Internet. Furthermore, we will address advantages and disadvantages of the different architectures. With respect to these criteria, we develop a new architecture overcoming these weaknesses. Our system, called Smart Home Context Management System, will be used for intelligent home utilities, appliances, and electronics and includes physical...

  11. Production Platform Development Through the Four Loops of Concern

    DEFF Research Database (Denmark)

    Sørensen, Daniel Grud Hellerup; Bossen, Jacob; Bejlegaard, Mads

    2017-01-01

    Managing product variety is still an issue in the industry, and one that gets a lot of attention. Among several ways to address this issue, is the development of platforms. Platforms, for instance coupled with the use of reconfigurable manufacturing systems, can potentially enable manufacturers t...

  12. Cell illustrator 4.0: a computational platform for systems biology.

    Science.gov (United States)

    Nagasaki, Masao; Saito, Ayumu; Jeong, Euna; Li, Chen; Kojima, Kaname; Ikeda, Emi; Miyano, Satoru

    2011-01-01

    Cell Illustrator is a software platform for Systems Biology that uses the concept of Petri net for modeling and simulating biopathways. It is intended for biological scientists working at bench. The latest version of Cell Illustrator 4.0 uses Java Web Start technology and is enhanced with new capabilities, including: automatic graph grid layout algorithms using ontology information; tools using Cell System Markup Language (CSML) 3.0 and Cell System Ontology 3.0; parameter search module; high-performance simulation module; CSML database management system; conversion from CSML model to programming languages (FORTRAN, C, C++, Java, Python and Perl); import from SBML, CellML, and BioPAX; and, export to SVG and HTML. Cell Illustrator employs an extension of hybrid Petri net in an object-oriented style so that biopathway models can include objects such as DNA sequence, molecular density, 3D localization information, transcription with frame-shift, translation with codon table, as well as biochemical reactions.

  13. SciCloud: A Scientific Cloud and Management Platform for Smart City Data

    DEFF Research Database (Denmark)

    Liu, Xiufeng; Nielsen, Per Sieverts; Heller, Alfred

    2017-01-01

    private scientific cloud, SciCloud, to tackle these grand challenges. SciCloud provides on-demand computing resource provisions, a scalable data management platform and an in-place data analytics environment to support the scientific research using smart city data....

  14. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    International Nuclear Information System (INIS)

    Richter, Steffen; Martin, Michael

    2006-01-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  15. Safety I and C system platforms - State-of-the-art and long-term available - A contradiction in terms?

    Energy Technology Data Exchange (ETDEWEB)

    Richter, Steffen; Martin, Michael [Framatome ANP GmbH, P.O. Box 3220, Freyeslebenstrasse 1, D-91050 Erlangen (Germany)

    2006-07-01

    Automation systems, particularly in the field of safety I and C, are subject to conflict between three challenges. Customers' requests for state-of-the-art technology, ever shorter innovation cycles in the electronics industry and computer business and the requirement for long-term spare parts supply demand thorough and sustainable concepts from the supply market. The TELEPERM XS digital safety I and C platform has been applied successfully since 1998 for the modernization of safety I and C systems in over 30 NPP units from different reactor suppliers as well as for new plant construction. The platform is subject to a forward-looking life cycle management program combining an evolutionary and future-oriented approach to platform development with measures for ensuring the long-term support of the installed base. Driven by ever shorter innovation cycles in the electronics and automation industry, the platform is continuously evolved with state-of-the-art technology and enhanced safety features. The continuous innovation process is combined with maximum compatibility of the I and C components that make up the TELEPERM XS system platform. This makes the system future-oriented and simultaneously assures long-term availability of replacement parts. In this way TELEPERM XS meets the customer requirements for up-to-date but proven technology suitable to ensure an operating life of safety I and C equipment spanning several decades. As a matter of course, the platform and component development adheres to the robust and proven architecture of TELEPERM XS, thereby limiting risks for equipment qualification and project licensing to a minimum. (authors)

  16. Knowledge management in modern organization based on systems III platform ICT

    Directory of Open Access Journals (Sweden)

    Piotr Adamczewski

    2016-12-01

    Full Text Available Systems ICT (Information and Communication Technology form the basis of modern economic organizations. In particular, the intelligent organizations for which advanced ICT infrastructure is a sine qua non for effective knowledge management. This article aims to show the role of modern trends of ICT referred to as SMAC (Social, Mobility, Analytics, Cloud, and which are currently canon IT support management processes. These solutions allow you to create new models of organization functioning in global markets with the use of strategic resources, which is the knowledge assisted solutions SMAC.

  17. A context management system for a cost-efficient smart home platform

    Science.gov (United States)

    Schneider, J.; Klein, A.; Mannweiler, C.; Schotten, H. D.

    2012-09-01

    This paper presents an overview of state-of-the-art architectures for integrating wireless sensor and actuators networks into the Future Internet. Furthermore, we will address advantages and disadvantages of the different architectures. With respect to these criteria, we develop a new architecture overcoming these weaknesses. Our system, called Smart Home Context Management System, will be used for intelligent home utilities, appliances, and electronics and includes physical, logical as well as network context sources within one concept. It considers important aspects and requirements of modern context management systems for smart X applications: plug and play as well as plug and trust capabilities, scalability, extensibility, security, and adaptability. As such, it is able to control roller blinds, heating systems as well as learn, for example, the user's taste w.r.t. to home entertainment (music, videos, etc.). Moreover, Smart Grid applications and Ambient Assisted Living (AAL) functions are applicable. With respect to AAL, we included an Emergency Handling function. It assures that emergency calls (police, ambulance or fire department) are processed appropriately. Our concept is based on a centralized Context Broker architecture, enhanced by a distributed Context Broker system. The goal of this concept is to develop a simple, low-priced, multi-functional, and save architecture affordable for everybody. Individual components of the architecture are well tested. Implementation and testing of the architecture as a whole is in progress.

  18. Towards an ICT-Based Platform for Type 1 Diabetes Mellitus Management

    Directory of Open Access Journals (Sweden)

    Ignacio Rodríguez-Rodríguez

    2018-03-01

    Full Text Available Type 1 Diabetes Mellitus (DM1 is a metabolic disease that is characterized by chronic hyperglycemia due to a lack of pancreatic insulin production. This forces patients to perform several blood glucose measurements per day—by means of capillary glucometers—in order to infer a trend and try to predict future values. In this way, a decision about the insulin dosage that has to be exogenously injected to maintain glycemia within the desirable levels is made. Unfortunately, this method usually suffers from relatively high imprecision. However, recent advances in information and communication technologies (ICT, along with novel biosensors that could provide a real-time comprehensive condition of the patient, offer a new perspective in DM1 management. In this sense, new disruptive technologies like Big Data, the Internet of Things (IoT, and Cloud Computing, as well as Machine Learning (ML can play an important role in managing DM1. In this work, firstly, an analysis of previously published ICT-based methods for the management of diabetes continuous monitoring is carried out. In this way, an assessment of the possible lack of such proposals is presented, along with the challenges to be overcome in forthcoming smart DM1 management systems. Finally, an overview of a holistic ICT-based platform for DM1 management that try to solve the limitations of previous works, while at the same time, taking advantage of the abovementioned disruptive technologies is hereby proposed.

  19. CHALLENGES IN DEVELOPING A MANAGEMENT AND COMMUNICATION PLATFORM INSIDE A HIGHER EDUCATIONAL ORGANIZATION

    Directory of Open Access Journals (Sweden)

    MUSCALU EMANOIL

    2015-04-01

    Full Text Available At present, the world is in a phase of economic and social development, with many and varied features of the knowledge society based on science and education. The organization is defined not only by the products and / or services, but also the ability to communicate to its employees and management team. Continuous exchange of messages is the correlation factor that generates knowledge in the society and inside the organization to fulfill its mission and strategies. The purpose of this work is to identify the necessity of developing a platform which should provide the support for the organization and also for the specific activities developed inside the organization. Also, when developing such a system, there are few aspects that should be taken into consideration, according to the organization’s goals. Therefore the development of a platform by a higher educational institution could improve the communication inside the organization, could improve the management’s activity and also can provide access to knowledge for the students. Developing a judicial platform, for students, could provide possible solutions to problems like training and practice, or other problems emphasized by the law experts that recorded for example unreasonable deadlines given by the courts in insolvency and commercial cases in general, by improving internal and external communication and improving the quality of commercial law and not only.

  20. Information System for Land-Use Planning and Management

    Institute of Scientific and Technical Information of China (English)

    YU Xiao; MIAO Fang

    2008-01-01

    In order to maintain the overall social interest in land use and improve the level of land administration, an information system for land-use planning and management (ISLUPM) was established, which is composed of presentation layer, business logic layer and data layer in the general structure. The application support platform of the ISLUPM, built based on COM, COM+ and .NET standard components, includes data engine, data management, assemblies, components management, operation management, and interface. Then, an elaboration was made on major functions of the ISLUPM, such as planning revision scheme, planning operation flow, digital processing, thematic analysis and inquiry, and preparation of the chart of reserved land resources. The developed system has been successfully applied to the land-use planning and management work of Longquanyi District, Chengdu, China. It may provide a reference for development of geographic information system (GIS) for land and resources.

  1. Defining a convergence network platform framework for smart grid and intelligent transport systems

    International Nuclear Information System (INIS)

    Coronado Mondragon, Adrian E.; Coronado, Etienne S.; Coronado Mondragon, Christian E.

    2015-01-01

    The challenges faced by electricity grids suggest smart grids will have to coordinate its operation with other important initiatives in areas such as transportation. The smart grid relies on the use of network platforms where meter readings and data can be transmitted. On the other hand, concerning transportation systems the need to achieve a reduction of road congestion and traffic accidents among the increasing use of electric vehicles has consolidated the importance of ITS (intelligent transport systems). Given the magnitude of the challenges faced by both the smart grid and ITS, the aim of this work is to identify the elements comprising a convergence platform capable of supporting future services for data traffic associated to smart grid operations as well as ITS-related commercial service applications and road traffic safety messaging. A seaport terminal scenario is used to present a convergence network platform incorporating WSN (wireless sensor network) theory. The results of the simulation of the proposed network confirms the suitability of WSN to be used in the transmission of data traffic associated to meter readings which is required for effective energy consumption and management policies in industrial environments comprising equipment with high energy demands. - Highlights: • Common needs/challenges of smart grid/ITS can be addressed by a convergence network platform. • VANETs are identified as key components of the smart grid/ITS convergence network platform. • WSN (Wireless Sensor Network) theory is suitable for the transmission of data traffic associated to meter readings. • The amount of energy supplied to the network is low but enough to support data traffic required in industrial environments. • WSN supports the steady exchange of packets as characterized in industrial environments like seaports

  2. Poster — Thur Eve — 52: A Web-based Platform for Collaborative Document Management in Radiotherapy

    International Nuclear Information System (INIS)

    Kildea, J.; Joseph, A.

    2014-01-01

    We describe DepDocs, a web-based platform that we have developed to manage the committee meetings, policies, procedures and other documents within our otherwise paperless radiotherapy clinic. DepDocs is essentially a document management system based on the popular Drupal content management software. For security and confidentiality, it is hosted on a linux server internal to our hospital network such that documents are never sent to the cloud or outside of the hospital firewall. We used Drupal's in-built role-based user rights management system to assign a role, and associated document editing rights, to each user. Documents are accessed for viewing using either a simple Google-like search or by generating a list of related documents from a taxonomy of categorization terms. Our system provides document revision tracking and an document review and approval mechanism for all official policies and procedures. Committee meeting schedules, agendas and minutes are maintained by committee chairs and are restricted to committee members. DepDocs has been operational within our department for over six months and has already 45 unique users and an archive of over 1000 documents, mostly policies and procedures. Documents are easily retrievable from the system using any web browser within our hospital's network

  3. Poster — Thur Eve — 52: A Web-based Platform for Collaborative Document Management in Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Kildea, J.; Joseph, A. [Dept. of Medical Physics, McGill University Health Centre, Montreal, QC (Canada)

    2014-08-15

    We describe DepDocs, a web-based platform that we have developed to manage the committee meetings, policies, procedures and other documents within our otherwise paperless radiotherapy clinic. DepDocs is essentially a document management system based on the popular Drupal content management software. For security and confidentiality, it is hosted on a linux server internal to our hospital network such that documents are never sent to the cloud or outside of the hospital firewall. We used Drupal's in-built role-based user rights management system to assign a role, and associated document editing rights, to each user. Documents are accessed for viewing using either a simple Google-like search or by generating a list of related documents from a taxonomy of categorization terms. Our system provides document revision tracking and an document review and approval mechanism for all official policies and procedures. Committee meeting schedules, agendas and minutes are maintained by committee chairs and are restricted to committee members. DepDocs has been operational within our department for over six months and has already 45 unique users and an archive of over 1000 documents, mostly policies and procedures. Documents are easily retrievable from the system using any web browser within our hospital's network.

  4. JobCenter: an open source, cross-platform, and distributed job queue management system optimized for scalability and versatility

    Directory of Open Access Journals (Sweden)

    Jaschob Daniel

    2012-07-01

    Full Text Available Abstract Background Laboratories engaged in computational biology or bioinformatics frequently need to run lengthy, multistep, and user-driven computational jobs. Each job can tie up a computer for a few minutes to several days, and many laboratories lack the expertise or resources to build and maintain a dedicated computer cluster. Results JobCenter is a client–server application and framework for job management and distributed job execution. The client and server components are both written in Java and are cross-platform and relatively easy to install. All communication with the server is client-driven, which allows worker nodes to run anywhere (even behind external firewalls or “in the cloud” and provides inherent load balancing. Adding a worker node to the worker pool is as simple as dropping the JobCenter client files onto any computer and performing basic configuration, which provides tremendous ease-of-use, flexibility, and limitless horizontal scalability. Each worker installation may be independently configured, including the types of jobs it is able to run. Executed jobs may be written in any language and may include multistep workflows. Conclusions JobCenter is a versatile and scalable distributed job management system that allows laboratories to very efficiently distribute all computational work among available resources. JobCenter is freely available at http://code.google.com/p/jobcenter/.

  5. Providing a Platform for Parents? Exploring the Nature of Parental Engagement with School Learning Platforms

    Science.gov (United States)

    Selwyn, N.; Banaji, S.; Hadjithoma-Garstka, C.; Clark, W.

    2011-01-01

    This paper investigates how schools are supporting parents' involvement with their children's education through the use of "Learning Platform" technologies--i.e. the integrated use of virtual learning environments, management information systems, communications, and other information and resource-sharing technologies. Based on in-depth…

  6. A User-Centered Mobile Cloud Computing Platform for Improving Knowledge Management in Small-to-Medium Enterprises in the Chilean Construction Industry

    Directory of Open Access Journals (Sweden)

    Daniela Núñez

    2018-03-01

    Full Text Available Knowledge management (KM is a key element for the development of small-to-medium enterprises (SMEs in the construction industry. This is particularly relevant in Chile, where this industry is composed almost entirely of SMEs. Although various KM system proposals can be found in the literature, they are not suitable for SMEs, due to usability problems, budget constraints, and time and connectivity issues. Mobile Cloud Computing (MCC systems offer several advantages to construction SMEs, but they have not yet been exploited to address KM needs. Therefore, this research is aimed at the development of a MCC-based KM platform to manage lessons learned in different construction projects of SMEs, through an iterative and user-centered methodology. Usability and quality evaluations of the proposed platform show that MCC is a feasible and attractive option to address the KM issues in SMEs of the Chilean construction industry, since it is possible to consider both technical and usability requirements.

  7. An Interactive Platform to Visualize Data-Driven Clinical Pathways for the Management of Multiple Chronic Conditions.

    Science.gov (United States)

    Zhang, Yiye; Padman, Rema

    2017-01-01

    Patients with multiple chronic conditions (MCC) pose an increasingly complex health management challenge worldwide, particularly due to the significant gap in our understanding of how to provide coordinated care. Drawing on our prior research on learning data-driven clinical pathways from actual practice data, this paper describes a prototype, interactive platform for visualizing the pathways of MCC to support shared decision making. Created using Python web framework, JavaScript library and our clinical pathway learning algorithm, the visualization platform allows clinicians and patients to learn the dominant patterns of co-progression of multiple clinical events from their own data, and interactively explore and interpret the pathways. We demonstrate functionalities of the platform using a cluster of 36 patients, identified from a dataset of 1,084 patients, who are diagnosed with at least chronic kidney disease, hypertension, and diabetes. Future evaluation studies will explore the use of this platform to better understand and manage MCC.

  8. Stratifying the Develoment of Product Platforms

    DEFF Research Database (Denmark)

    Sköld, Martin; Karlsson, Christer

    2013-01-01

    companies develop platforms for different aims, purposes, and product scopes. Following on from this, the requirements for platform development resources, the ways of organizing platform development, and the implications for management styles have not been explored and are presumably varying. To start...... influencing the project length, requirements for platform development resources, principles for organizing, and implications for management styles....

  9. Introducing Platform Interactions Model for Studying Multi-Sided Platforms

    DEFF Research Database (Denmark)

    Staykova, Kalina; Damsgaard, Jan

    2018-01-01

    Multi-Sided Platforms (MSPs) function as socio-technical entities that facilitate direct interactions between various affiliated to them constituencies through developing and managing IT architecture. In this paper, we aim to explain the nature of the platform interactions as key characteristic o...

  10. Remote Video Monitor of Vehicles in Cooperative Information Platform

    Science.gov (United States)

    Qin, Guofeng; Wang, Xiaoguo; Wang, Li; Li, Yang; Li, Qiyan

    Detection of vehicles plays an important role in the area of the modern intelligent traffic management. And the pattern recognition is a hot issue in the area of computer vision. An auto- recognition system in cooperative information platform is studied. In the cooperative platform, 3G wireless network, including GPS, GPRS (CDMA), Internet (Intranet), remote video monitor and M-DMB networks are integrated. The remote video information can be taken from the terminals and sent to the cooperative platform, then detected by the auto-recognition system. The images are pretreated and segmented, including feature extraction, template matching and pattern recognition. The system identifies different models and gets vehicular traffic statistics. Finally, the implementation of the system is introduced.

  11. Web Content Management Systems: An Analysis of Forensic Investigatory Challenges.

    Science.gov (United States)

    Horsman, Graeme

    2018-02-26

    With an increase in the creation and maintenance of personal websites, web content management systems are now frequently utilized. Such systems offer a low cost and simple solution for those seeking to develop an online presence, and subsequently, a platform from which reported defamatory content, abuse, and copyright infringement has been witnessed. This article provides an introductory forensic analysis of the three current most popular web content management systems available, WordPress, Drupal, and Joomla! Test platforms have been created, and their site structures have been examined to provide guidance for forensic practitioners facing investigations of this type. Result's document available metadata for establishing site ownership, user interactions, and stored content following analysis of artifacts including Wordpress's wp_users, and wp_comments tables, Drupal's "watchdog" records, and Joomla!'s _users, and _content tables. Finally, investigatory limitations documenting the difficulties of investigating WCMS usage are noted, and analysis recommendations are offered. © 2018 American Academy of Forensic Sciences.

  12. Development of a Novel System to Measure a Clearance of a Passenger Platform

    Science.gov (United States)

    Shimizu, M.; Oizumi, J.; Matsuoka, R.; Takeda, H.; Okukura, H.; Ooya, A.; Koike, A.

    2016-06-01

    Clearances of a passenger platform at a railway station should be appropriately maintained for safety of both trains and passengers. In most Japanese railways clearances between a platform and a train car is measured precisely once or twice a year. Because current measurement systems operate on a track, the closure of the track is unavoidable. Since the procedure of the closure of a track is time-consuming and bothersome, we decided to develop a new system to measure clearances without the closure of a track. A new system is required to work on a platform and the required measurement accuracy is less than several millimetres. We have adopted a 3D laser scanner and stop-and-go operation for a new system. The current systems on a track measure clearances continuously at walking speed, while our system on a platform measures clearances at approximately ten metres intervals. The scanner controlled by a PC acquires a set of point data at each measuring station. Edge points of the platform, top and side points of two rails are detected from the acquired point data. Finally clearances of the platform are calculated by using the detected feature points of the platform and the rails. The results of an experiment using a prototype of our system show that the measurement accuracy by our system would be satisfactory, but our system would take more time than the current systems. Since our system requires no closure of a track, we conclude that our system would be convenient and effective.

  13. Mobile Attendance Checking System on Android Platform for Kazakhstani University

    Science.gov (United States)

    Saparkhojayev, N.; Shakhov, E.; Mailybayev, Y.

    2016-04-01

    In the 21st century-the century of Information Technology, it is difficult to imagine life without any gadgets: phones, tablets, computers, laptops, and so on. Today, smartphones and tablets are becoming popular, and thus their operating systems become popular too. Android is designed for low-power devices that run on battery power at full capacity, using all of its services, such as cameras, lights, GPS navigation, Wi-Fi, etc. In Kazakhstani universities, the process of checking students’ attendance is one of the important issues, because final grade evaluation of students is based on their total number of appearances and their grades during the whole semester. This raises the question of having some tool to control students’ attendance. There are many possible ways of controlling attendance: there are many examples when universities prefer to control attendance by the use of paper sheet, and some universities prefer to use two-stage way of controlling attendance: firstly, teachers and professors use paper sheet for checking students’ attendance and after this, they fill out these information into a system manually. However, this is not an efficient way since there will be spent much of time for calling students names and putting marks like “presence” or “absence” if the class is a lecture class, and in this class at least 5 groups are presented. Furthermore, some students may call his/her friend as “presence” nevertheless to the fact that this student is currently absent. After taking into consideration all these issues and the fact that many gadgets use Android platform, authors of the following research paper decided to create a mobile system that makes easier to check students’ attendance automatically, and this system is implemented in Almaty Management University, Kazakhstan. The system is based on Android platform, and in this paper, details of this system are presented.

  14. Manufacture of Platform Prototype for Digital Safety System

    International Nuclear Information System (INIS)

    Lee, S. Y.; Kim, J. S.; Kim, J. M.

    2010-01-01

    Unit controller is a basic unit of digital safety system platform prototype. The typical unit controller is comprised of CPB(CPU board), CMB(communication board), AIB(Analog input board), AOB(Analog output board), CIB(contact input board), COB(contact output board), and a subrack. It is developed according to H/W development procedure and S/W development life cycle. A digital safety system(for example, plant protection system) is the assemblies of unit controllers. CPB performs the function of each system. DSP(digital signal processor) is built in CPB. CMB is responsible for communication between unit controllers. NSD(Network Switching Device) exchanges data between the unit controllers. Each unit controller of the platform are connected to NSD through CMB. Reliability analyses on unit controller and NSD are performed. These reliability data are used as input of technical validation

  15. Software and system development using virtual platforms full-system simulation with wind river simics

    CERN Document Server

    Aarno, Daniel

    2014-01-01

    Virtual platforms are finding widespread use in both pre- and post-silicon computer software and system development. They reduce time to market, improve system quality, make development more efficient, and enable truly concurrent hardware/software design and bring-up. Virtual platforms increase productivity with unparalleled inspection, configuration, and injection capabilities. In combination with other types of simulators, they provide full-system simulations where computer systems can be tested together with the environment in which they operate. This book is not only about what simulat

  16. Platform for resource management : case studies of success or failure in Benin and Burkina Faso

    NARCIS (Netherlands)

    Dangbegnon, C.

    1998-01-01

    The present book focuses on platforms for (natural) resource management. It analyses various case studies in Benin and Burkina Faso. Conditions for collective resource management in conflict and interdependent situations are the most critical issues. The present study raises the importance

  17. Information security threats in web-portals on the open journal systems platform

    Directory of Open Access Journals (Sweden)

    Anton A. Abramov

    2018-05-01

    Full Text Available This article addresses the problem of security threats while working with web portals built on the Open Journal Systems platform. The Open Journal Systems (OJS platform was originally developed as part of the Public Knowledge Project and it is one of the most popular open-source platforms for web journals today. Based on the data available in the Public Knowledge Project, there were more than 10,000 active journals using the open journal systems platform by the end of 2016. A migration of a journal to such advanced and complex platform helps to handle the entire workflow over a single web portal. Therefore it is an important move and only peer-reviewed journals that are part of Russian and Worldwide citation systems go for it. At the same time the problem of keeping privacy for a manuscript before it is published is very important for these journals and for authors who submit it to the journal. The paper describes the most common threats for the web portals on the OJS platform as well as a particular model of the security threats, and suggests the measures that could help to neutralize these threats.

  18. Study on key technologies of vehicle networking system platform for electric automobiles based on micro-service

    Science.gov (United States)

    Ye, Fei

    2018-04-01

    With the rapid increase of electric automobiles and charging piles, the elastic expansion and online rapid upgrade were required for the vehicle networking system platform (system platform for short). At present, it is difficult to meet the operation needs due to the traditional huge rock architecture used by the system platform. This paper studied the system platform technology architecture based on "cloud platform +micro-service" to obtain a new generation of vehicle networking system platform with the combination of elastic expansion and application, thus significantly improving the service operation ability of system.

  19. Design a platform of open Access to scientific information management

    Directory of Open Access Journals (Sweden)

    Alexander Mackenzie Rivero

    2016-08-01

    Full Text Available This present research is based on the creation of a proposed open source platform for the management of scientific information in the National Agricultural Research Institute (INIA, which will allow the creation of a network of distributed knowledge specialized in agricultural science and technology , to ensure security and data integrity, access levels, open source, adapted to new needs, accessible from any location, ruled by international regulations and standards, ensuring access regardless of used operating system. By using the WAN data network installed in the institution. Making the agricultural sector information held by the institution available and accesible with the power of Internet broadcast. Thus the institution has a tool that integrates information currently scattered throughout the country agricultural sector. This research is framed within the modality of feasible project, also is based on a documentary and descriptive design.

  20. A Real-Time Simulation Platform for Power System Operation

    DEFF Research Database (Denmark)

    Cha, Seung-Tae; Østergaard, Jacob; Wu, Qiuwei

    2010-01-01

    This paper describes the real-time digital simulation platform that can be used for power system operation, analysis, and power system modeling. This particular platform gives grid operators, planners and researchers the opportunity to observe how a power system behaves and can be used...... in real time. Various phenomena commonly encountered when dealing with the two-area system is studied. Despite its small size, it mimics very closely the behavior of typical systems in actual operation. The electromagnetic transient type of simulation made in RSCAD enables the study of fast and detailed...... phenomena like single-phase faults in the two-area network and to observe their effects on a larger time scale. Also, the case study of 11 bus system with 5 generators has been also used and the results are presented....

  1. Development of a hardware-in- loop simulation platform for NPP main control systems

    Directory of Open Access Journals (Sweden)

    Liu Pengfei

    2017-01-01

    Full Text Available The simulation technology of the nuclear power plant are gradually applying to the nuclear power industry. However, most of the research on nuclear power plant simulation system only focus on pure computerized simulation at present, and it is difficult to fully display the characteristics of the simulating objects. In order to simulate the response characteristics of control system more really, a hardware-in-loop simulation platform of main control systems in the nuclear power plant has been developed in this paper. This simulation platform consists of thermal-hydraulic model, control and protection system model, physical DCS system and real-time interactive database. A physical industrial DCS system has been coupled to this platform to simulate the main control systems in the NPP, which makes the simulation result much closer to the actual control systems. The devoloped simulation platform has been validated by some steady and transient cases in this paper. This hardware-in-loop simulation platform can be used in the simulation and optimal design of NPP control systems. Furthermore, it can be used in the failure mode and effect analysis of the instrumentation and control systems in the nuclear power plant.

  2. Generic test platform for representative tests of safety I/C systems - 15546

    International Nuclear Information System (INIS)

    Fourestie, B.; Kuck, H.; Richter, J.; Rieche, S.; Waitz, M.

    2015-01-01

    In compliance with the IEC 61513 safety Instrumentation and Control (I/C) systems must be successfully validated in their final configuration prior to installation on site and commissioning. However the contingent need for modifications during system validation activities or subsequently during the commissioning phase may entail long and costly re-engineering of the I/C systems. With the view to ease these possible modifications, a Generic Test Platform has been developed by AREVA which allows combining a real I/C system subpart with an emulation server. This platform provides a faithful representation of the I/C System allowing crediting the validation test results carried out on this platform. (authors)

  3. Complex products and systems: potential from using lay out platforms

    NARCIS (Netherlands)

    Halman, Johannes I.M.; Hofer, Adrian P.

    2004-01-01

    In their quest to manage the complexity of offering greater product variety, firms in many industries are considering platform-based development of product families. Key in this approach is the sharing of components, modules, and other assets across a family of products. Current research indicates

  4. Autonomous mobile platform with simultaneous localisation and mapping system for patrolling purposes

    Science.gov (United States)

    Mitka, Łukasz; Buratowski, Tomasz

    2017-10-01

    This work describes an autonomous mobile platform for supervision and surveillance purposes. The system can be adapted for mounting on different types of vehicles. The platform is based on a SLAM navigation system which performs a localization task. Sensor fusion including laser scanners, inertial measurement unit (IMU), odometry and GPS lets the system determine its position in a certain and precise way. The platform is able to create a 3D model of a supervised area and export it as a point cloud. The system can operate both inside and outside as the navigation algorithm is resistant to typical localization errors caused by wheel slippage or temporal GPS signal loss. The system is equipped with a path-planning module which allows operating in two modes. The first mode is for periodical observation of points in a selected area. The second mode is turned on in case of an alarm. When it is called, the platform moves with the fastest route to the place of the alert. The path planning is always performed online with use of the most current scans, therefore the platform is able to adjust its trajectory to the environment changes or obstacles that are in the motion. The control algorithms are developed under the Robot Operating System (ROS) since it comes with drivers for many devices used in robotics. Such a solution allows for extending the system with any type of sensor in order to incorporate its data into a created area model. Proposed appliance can be ported to other existing robotic platforms or used to develop a new platform dedicated to a specific kind of surveillance. The platform use cases are to patrol an area, such as airport or metro station, in search for dangerous substances or suspicious objects and in case of detection instantly inform security forces. Second use case is a tele-operation in hazardous area for an inspection purposes.

  5. Software platform for managing the classification of error- related potentials of observers

    Science.gov (United States)

    Asvestas, P.; Ventouras, E.-C.; Kostopoulos, S.; Sidiropoulos, K.; Korfiatis, V.; Korda, A.; Uzunolglu, A.; Karanasiou, I.; Kalatzis, I.; Matsopoulos, G.

    2015-09-01

    Human learning is partly based on observation. Electroencephalographic recordings of subjects who perform acts (actors) or observe actors (observers), contain a negative waveform in the Evoked Potentials (EPs) of the actors that commit errors and of observers who observe the error-committing actors. This waveform is called the Error-Related Negativity (ERN). Its detection has applications in the context of Brain-Computer Interfaces. The present work describes a software system developed for managing EPs of observers, with the aim of classifying them into observations of either correct or incorrect actions. It consists of an integrated platform for the storage, management, processing and classification of EPs recorded during error-observation experiments. The system was developed using C# and the following development tools and frameworks: MySQL, .NET Framework, Entity Framework and Emgu CV, for interfacing with the machine learning library of OpenCV. Up to six features can be computed per EP recording per electrode. The user can select among various feature selection algorithms and then proceed to train one of three types of classifiers: Artificial Neural Networks, Support Vector Machines, k-nearest neighbour. Next the classifier can be used for classifying any EP curve that has been inputted to the database.

  6. A full life cycle nuclear knowledge management framework based on digital system

    International Nuclear Information System (INIS)

    Wang, Minglu; Zheng, Mingguang; Tian, Lin; Qiu, Zhongming; Li, Xiaoyan

    2017-01-01

    Highlights: • A full life cycle nuclear power plant knowledge management framework is introduced. • This framework benefits the safe design, construction, operation and maintenance. • This framework enhances safety, economy and reliability of nuclear power plant. - Abstract: The nuclear power plant is highly knowledge-intensive facility. With the rapid advent and development of modern information and communication technology, knowledge management in nuclear industry has been provided with new approaches and possibilities. This paper introduces a full cycle nuclear power plant knowledge management framework based on digital system and tries to find solutions to knowledge creation, sharing, transfer, application and further innovation in nuclear industry. This framework utilizes information and digital technology to build top-tier object driven work environment, automatic design and analysis integration platform, digital dynamic performance Verification & Validation (V&V) platform, collaborative manufacture procedure, digital construction platform, online monitoring and configuration management which benefit knowledge management in NPP full life cycle. The suggested framework will strengthen the design basis of the nuclear power plants (NPPs) and will ensure the safety of the NPP design throughout the whole lifetime of the plant.

  7. Semi-physical Simulation Platform of a Parafoil Nonlinear Dynamic System

    International Nuclear Information System (INIS)

    Gao Hai-Tao; Yang Sheng-Bo; Zhu Er-Lin; Sun Qing-Lin; Chen Zeng-Qiang; Kang Xiao-Feng

    2013-01-01

    Focusing on the problems in the process of simulation and experiment on a parafoil nonlinear dynamic system, such as limited methods, high cost and low efficiency we present a semi-physical simulation platform. It is designed by connecting parts of physical objects to a computer, and remedies the defect that a computer simulation is divorced from a real environment absolutely. The main components of the platform and its functions, as well as simulation flows, are introduced. The feasibility and validity are verified through a simulation experiment. The experimental results show that the platform has significance for improving the quality of the parafoil fixed-point airdrop system, shortening the development cycle and saving cost

  8. A SCADA System for Energy Management in Intelligent Buildings

    OpenAIRE

    Figueiredo, Joao; Sá da Costa, Jose

    2012-01-01

    This paper develops an energy management platform for intelligent buildings using a SCADA system (Supervisory Control And Data Acquisition). This SCADA system integrates different types of information coming from the several technologies present in modern buildings (control of ventilation, temperature, illumination, etc.). The developed control strategy implements an hierarchical cascade controller where inner loops are performed by local PLCs (Programmable Logic Controller), and the outer...

  9. Housing Development Building Management System (HDBMS For Optimized Electricity Bills

    Directory of Open Access Journals (Sweden)

    Weixian Li

    2017-08-01

    Full Text Available Smart Buildings is a modern building that allows residents to have sustainable comfort with high efficiency of electricity usage. These objectives could be achieved by applying appropriate, capable optimization algorithms and techniques. This paper presents a Housing Development Building Management System (HDBMS strategy inspired by Building Energy Management System (BEMS concept that will integrate with smart buildings using Supply Side Management (SSM and Demand Side Management (DSM System. HDBMS is a Multi-Agent System (MAS based decentralized decision making system proposed by various authors. MAS based HDBMS was created using JAVA on a IEEE FIPA compliant multi-agent platform named JADE. It allows agents to communicate, interact and negotiate with energy supply and demand of the smart buildings to provide the optimal energy usage and minimal electricity costs.  This results in reducing the load of the power distribution system in smart buildings which simulation studies has shown the potential of proposed HDBMS strategy to provide the optimal solution for smart building energy management.

  10. Volttron: An Agent Platform for the Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    Haack, Jereme N.; Akyol, Bora A.; Carpenter, Brandon J.; Tews, Cody W.; Foglesong, Lance W.

    2013-05-06

    VOLLTRON platform enables the deployment of intelligent sensors and controllers in the smart grid and provides a stable, secure and flexible framework that expands the sensing and control capabilities. VOLTTRON platform provides services fulfilling the essential requirements of resource management and security for agent operation in the power grid. The facilities provided by the platform allow agent developers to focus on the implementation of their agent system and not on the necessary "plumbing' code. For example, a simple collaborative demand response application was written in less than 200 lines of Python.

  11. Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

    NARCIS (Netherlands)

    Alblas, A.A.; Wortmann, J.C.

    2012-01-01

    The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

  12. The novel cloud application technology with virtual platform

    Directory of Open Access Journals (Sweden)

    Chen Ying-Chuan

    2018-01-01

    Full Text Available Virtualization technology of cloud application service is the major research issue in recent years. Our virtual platform can obtain a lot of advantages base on virtualization technology with suitable virtual machine solution that all system resources can deployed quickly and managed competently, and it has some features including the high capacity for reliability, elasticity and customization. In our virtual platform, there are many different application services are provided for cloud service style. For system computing resources, we need to share all of system and software resources using the virtualization technology is presented in related sections, and we proposed virtual and remote application technology to implement innovative, convenient and powerful cloud application service base on virtual platform. For users of our platform, they can easy to use any software and tools on demand with pay per use mode anytime, and they do not have specialized knowledge and ability of install and maintenance.

  13. H-Shaped Multiple Linear Motor Drive Platform Control System Design Based on an Inverse System Method

    Directory of Open Access Journals (Sweden)

    Caiyan Qin

    2017-12-01

    Full Text Available Due to its simple mechanical structure and high motion stability, the H-shaped platform has been increasingly widely used in precision measuring, numerical control machining and semiconductor packaging equipment, etc. The H-shaped platform is normally driven by multiple (three permanent magnet synchronous linear motors. The main challenges for H-shaped platform-control include synchronous control between the two linear motors in the Y direction as well as total positioning error of the platform mover, a combination of position deviation in X and Y directions. To deal with the above challenges, this paper proposes a control strategy based on the inverse system method through state feedback and dynamic decoupling of the thrust force. First, mechanical dynamics equations have been deduced through the analysis of system coupling based on the platform structure. Second, the mathematical model of the linear motors and the relevant coordinate transformation between dq-axis currents and ABC-phase currents are analyzed. Third, after the main concept of inverse system method being explained, the inverse system model of the platform control system has been designed after defining relevant system variables. Inverse system model compensates the original nonlinear coupled system into pseudo-linear decoupled linear system, for which typical linear control methods, like PID, can be adopted to control the system. The simulation model of the control system is built in MATLAB/Simulink and the simulation result shows that the designed control system has both small synchronous deviation and small total trajectory tracking error. Furthermore, the control program has been run on NI controller for both fixed-loop-time and free-loop-time modes, and the test result shows that the average loop computation time needed is rather small, which makes it suitable for real industrial applications. Overall, it proves that the proposed new control strategy can be used in

  14. 76 FR 1192 - Standard on Powered Platforms for Building Maintenance; Extension of the Office of Management and...

    Science.gov (United States)

    2011-01-07

    ...] Standard on Powered Platforms for Building Maintenance; Extension of the Office of Management and Budget's... specified in its Standard on Powered Platforms for Building Maintenance (29 CFR 1910.66). DATES: Comments... Building Maintenance (29 CFR 1910.66). The Agency is requesting to retain its current burden hour total of...

  15. The 'cube' meta-model for the information system of large health sector organizations--a (platform neutral) mapping tool to integrate information system development with changing business functions and organizational development.

    Science.gov (United States)

    Balkányi, László

    2002-01-01

    To develop information systems (IS) in the changing environment of the health sector, a simple but throughout model, avoiding the techno-jargon of informatics, might be useful for the top management. A platform neutral, extensible, transparent conceptual model should be established. Limitations of current methods lead to a simple, but comprehensive mapping, in the form of a three-dimensional cube. The three 'orthogonal' views are (a) organization functionality, (b) organizational structures and (c) information technology. Each of the cube-sides is described according to its nature. This approach enables to define any kind of an IS component as a certain point/layer/domain of the cube and enables also the management to label all IS components independently form any supplier(s) and/or any specific platform. The model handles changes in organization structure, business functionality and the serving info-system independently form each other. Practical application extends to (a) planning complex, new ISs, (b) guiding development of multi-vendor, multi-site ISs, (c) supporting large-scale public procurement procedures and the contracting, implementation phase by establishing a platform neutral reference, (d) keeping an exhaustive inventory of an existing large-scale system, that handles non-tangible aspects of the IS.

  16. DIMEL - A New Interactive System for Distant E-Learning Management

    Directory of Open Access Journals (Sweden)

    C. Katansky

    2012-04-01

    Full Text Available The article presents the basic results of a study, dealing with the problems of e-learning and e-teaching development in the University of Sofia. A new system - DIMEL (Distant and Interactive Management of E-Learning was implemented by the „Management of Education” training courses with adult students. The courses are part of the continuing vocational training (the qualifications upgrading of school principals, vice principals and other managing staff in the sector of education. The system DIMEL uses an original interactive training management technology, covering the field of e-learning and e-teaching activities, via digital library logistic platform. The author performs this project research in collaboration with the University Library „St. Kliment Ohridski”.

  17. Combining a Multi-Agent System and Communication Middleware for Smart Home Control: A Universal Control Platform Architecture

    OpenAIRE

    Song Zheng; Qi Zhang; Rong Zheng; Bi-Qin Huang; Yi-Lin Song; Xin-Chu Chen

    2017-01-01

    In recent years, the smart home field has gained wide attention for its broad application prospects. However, families using smart home systems must usually adopt various heterogeneous smart devices, including sensors and devices, which makes it more difficult to manage and control their home system. How to design a unified control platform to deal with the collaborative control problem of heterogeneous smart devices is one of the greatest challenges in the current smart home field. The main ...

  18. eTRIKS platform: Conception and operation of a highly scalable cloud-based platform for translational research and applications development.

    Science.gov (United States)

    Bussery, Justin; Denis, Leslie-Alexandre; Guillon, Benjamin; Liu, Pengfeï; Marchetti, Gino; Rahal, Ghita

    2018-04-01

    We describe the genesis, design and evolution of a computing platform designed and built to improve the success rate of biomedical translational research. The eTRIKS project platform was developed with the aim of building a platform that can securely host heterogeneous types of data and provide an optimal environment to run tranSMART analytical applications. Many types of data can now be hosted, including multi-OMICS data, preclinical laboratory data and clinical information, including longitudinal data sets. During the last two years, the platform has matured into a robust translational research knowledge management system that is able to host other data mining applications and support the development of new analytical tools. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Evaluating the E-Learning Platform from the Perspective of Knowledge Management: The AHP Approach

    Directory of Open Access Journals (Sweden)

    I-Chin Wu

    2013-06-01

    Full Text Available A growing number of higher education institutions have adopted asynchronous and synchronous Web-based learning platforms to improve students’ learning efficiency and increase learning satisfaction in the past decade. Unlike traditional face-to-face learning methods, e-learning platforms allow teachers to communicate with students and discuss course content anytime or anywhere. In addition, the teaching material can be reused via the e-learning platforms. To understand how students use e-learning platforms and what the implications are, we conducted an empirical study of the iCAN e-learning platform, which has been widely used in Fu-Jen Catholic University since 2005. We use the Analytic Hierarchy Process (AHP, a well-known multi-criteria evaluation approach, to compare five practices, i.e. the functions of the iCAN teaching platform. We adopted a brainstorming approach to design a questionnaire to measure learners’ perception of the e-learning platform based on the theory of knowledge transforming process in knowledge management. Accordingly, the model considers functioning and objectivity in terms of the following three attributes of learning effectiveness: individual learning, group sharing and learning performance. Twelve criteria with twelve evaluation items were used to investigate the effectiveness of the five practices. We also evaluated the strengths and weaknesses of the functions based on the types of courses in the iCan platform. We expect that the empirical evaluation results will provide teachers with suggestions and guidelines for using the e-learning platform effectively to facilitate their teaching activities and promote students’ learning efficiency and satisfaction.

  20. AEGIS: a wildfire prevention and management information system

    Science.gov (United States)

    Kostas Kalabokidis; Alan Ager; Mark Finney; Nikos Athanasis; Palaiologos Palaiologou; Christos Vasilakos

    2016-01-01

    We describe a Web-GIS wildfire prevention and management platform (AEGIS) developed as an integrated and easy-to-use decision support tool to manage wildland fire hazards in Greece (http://aegis.aegean.gr). The AEGIS platform assists with early fire warning, fire planning, fire control and coordination of firefighting forces by providing online access to...

  1. Omics Informatics: From Scattered Individual Software Tools to Integrated Workflow Management Systems.

    Science.gov (United States)

    Ma, Tianle; Zhang, Aidong

    2017-01-01

    Omic data analyses pose great informatics challenges. As an emerging subfield of bioinformatics, omics informatics focuses on analyzing multi-omic data efficiently and effectively, and is gaining momentum. There are two underlying trends in the expansion of omics informatics landscape: the explosion of scattered individual omics informatics tools with each of which focuses on a specific task in both single- and multi- omic settings, and the fast-evolving integrated software platforms such as workflow management systems that can assemble multiple tools into pipelines and streamline integrative analysis for complicated tasks. In this survey, we give a holistic view of omics informatics, from scattered individual informatics tools to integrated workflow management systems. We not only outline the landscape and challenges of omics informatics, but also sample a number of widely used and cutting-edge algorithms in omics data analysis to give readers a fine-grained view. We survey various workflow management systems (WMSs), classify them into three levels of WMSs from simple software toolkits to integrated multi-omic analytical platforms, and point out the emerging needs for developing intelligent workflow management systems. We also discuss the challenges, strategies and some existing work in systematic evaluation of omics informatics tools. We conclude by providing future perspectives of emerging fields and new frontiers in omics informatics.

  2. Understanding of the management information system based on MVC pattern

    Science.gov (United States)

    Chen, Sida

    2018-04-01

    With the development of the society, people have come to realize the significance of information, not only linguistically but also in the written form. To build an effective and efficient working flow, a new subject called Management Information System (MIS) came up. MIS is an integrated discipline, which utilizes comprehensive and systematical methods to manage information, and it enhances the work efficiency through building structured information platform. This paper demonstrates the Management Information System from shallow too deep with the understanding of MVC pattern, including its basic structure and application with ASP.NET. Also some discussions about its features are made in the last section.

  3. OTEC platform configuration and integration study. Volume I. Systems engineering and integration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-04-01

    The economic success of an Ocean Thermal Energy Conversion (OTEC) system is highly dependent on a platform which provides adequate support for the power system, accommodates reliably the cold water pipe, and is most cost effective. The results of a study conducted for the Department of Energy to assess six generic types of platforms to determine the most satisfactory platform for severl potential sites are presented. The six platform configurations are ship, circular barge, semi-submersible, Tuned Sphere, submersible, and spar. These represent directional and symmetric types of platforms which operate on the surface, at the interface, and submerged. The five sites for this study were primarily New Orleans, Keahole Point (Hawaii), Brazil, and secondarily Key West and Puerto Rico. Electrical transmission of energy by submarine cable is the planned form of energy transmission for all sites except Brazil, where chemical conversion is to be the method of transmission. This study is devoted to the platform (or ocean systems) of the OTEC plant which is chiefly comprised of the hull and structure, the seawater system, the position control system, and miscellaneous support/assembly systems. The principal elements in the work breakdown structure for the commercial plants are presented. The assessment of the six platform configurations was conducted utilizing a baseline plan (100-MW(e) (Net)) and site (New Orleans) with variations from the baseline to cover the range of interested platforms and sites.

  4. Design of the smart scenic spot service platform

    Science.gov (United States)

    Yin, Min; Wang, Shi-tai

    2015-12-01

    With the deepening of the smart city construction, the model "smart+" is rapidly developing. Guilin, the international tourism metropolis fast constructing need smart tourism technology support. This paper studied the smart scenic spot service object and its requirements. And then constructed the smart service platform of the scenic spot application of 3S technology (Geographic Information System (GIS), Remote Sensing (RS) and Global Navigation Satellite System (GNSS)) and the Internet of things, cloud computing. Based on Guilin Seven-star Park scenic area as an object, this paper designed the Seven-star smart scenic spot service platform framework. The application of this platform will improve the tourists' visiting experience, make the tourism management more scientifically and standardly, increase tourism enterprises operating earnings.

  5. Parallel application of plasma equilibrium fitting based on inhomogeneous platforms

    International Nuclear Information System (INIS)

    Liao Min; Zhang Jinhua; Chen Liaoyuan; Li Yongge; Pan Wei; Pan Li

    2008-01-01

    An online analysis and online display platform EFIT, which is based on the equilibrium-fitting mode, is inducted in this paper. This application can realize large data transportation between inhomogeneous platforms by designing a communication mechanism using sockets. It spends approximately one minute to complete the equilibrium fitting reconstruction by using a finite state machine to describe the management node and several node computers of cluster system to fulfill the parallel computation, this satisfies the online display during the discharge interval. An effective communication model between inhomogeneous platforms is provided, which could transport the computing results from Linux platform to Windows platform for online analysis and display. (authors)

  6. Attempt to promote hospital management by IM Public Platform

    Directory of Open Access Journals (Sweden)

    Hui CHEN

    2014-06-01

    Full Text Available Thisarticle has analyzed the contribution of modern IT to hospital management: using public platform of IM (instant message/communication will make it more convenient and efficient to conduct communication with (prior to the treatment, conduct treatment, and provide post-treatment service for patients and their family; withthe set-up of a smooth and efficient information channel set up, the relationship between patients and doctors will be greatly improved ,thus reputation and credibility of the hospital and its doctors will be promoted; when the public has better received the hospital and its doctors, social harmony will be achieved. 

  7. A wellness software platform with smart wearable devices and the demonstration report for personal wellness management

    Science.gov (United States)

    Kang, Won-Seok; Son, Chang-Sik; Lee, Sangho; Choi, Rock-Hyun; Ha, Yeong-Mi

    2017-07-01

    In this paper, we introduce a wellness software platform, called WellnessHumanCare, is a semi-automatic wellness management software platform which has the functions of complex wellness data acquisition(mental, physical and environmental one) with smart wearable devices, complex wellness condition analysis, private-aware online/offline recommendation, real-time monitoring apps (Smartphone-based, Web-based) and so on and we has demonstrated a wellness management service with 79 participants (experimental group: 39, control group: 40) who has worked at experimental group (H Corp.) and control group (K Corp.), Korea and 3 months in order to show the efficiency of the WellnessHumanCare.

  8. Analytical simulation platform describing projections in computed tomography systems

    International Nuclear Information System (INIS)

    Youn, Hanbean; Kim, Ho Kyung

    2013-01-01

    To reduce the patient dose, several approaches such as spectral imaging using photon counting detectors and statistical image reconstruction, are being considered. Although image-reconstruction algorithms may significantly enhance image quality in reconstructed images with low dose, true signal-to-noise properties are mainly determined by image quality in projections. We are developing an analytical simulation platform describing projections to investigate how quantum-interaction physics in each component configuring CT systems affect image quality in projections. This simulator will be very useful for an improved design or optimization of CT systems in economy as well as the development of novel image-reconstruction algorithms. In this study, we present the progress of development of the simulation platform with an emphasis on the theoretical framework describing the generation of projection data. We have prepared the analytical simulation platform describing projections in computed tomography systems. The remained further study before the meeting includes the following: Each stage in the cascaded signal-transfer model for obtaining projections will be validated by the Monte Carlo simulations. We will build up energy-dependent scatter and pixel-crosstalk kernels, and show their effects on image quality in projections and reconstructed images. We will investigate the effects of projections obtained from various imaging conditions and system (or detector) operation parameters on reconstructed images. It is challenging to include the interaction physics due to photon-counting detectors into the simulation platform. Detailed descriptions of the simulator will be presented with discussions on its performance and limitation as well as Monte Carlo validations. Computational cost will also be addressed in detail. The proposed method in this study is simple and can be used conveniently in lab environment

  9. Exploration and implementation of ontology-based cultural relic knowledge map integration platform

    Science.gov (United States)

    Yang, Weiqiang; Dong, Yiqiang

    2018-05-01

    To help designers to better carry out creative design and improve the ability of searching traditional cultural relic information, the ontology-based knowledge map construction method was explored and an integrated platform for cultural relic knowledge map was developed. First of all, the construction method of the ontology of cultural relics was put forward, and the construction of the knowledge map of cultural relics was completed based on the constructed cultural relic otology. Then, a personalized semantic retrieval framework for creative design was proposed. Finally, the integrated platform of the knowledge map of cultural relics was designed and realized. The platform was divided into two parts. One was the foreground display system, which was used for designers to search and browse cultural relics. The other was the background management system, which was for cultural experts to manage cultural relics' knowledge. The research results showed that the platform designed could improve the retrieval ability of cultural relic information. To sum up, the platform can provide a good support for the designer's creative design.

  10. Application research of cloud computing in emergency system platform of nuclear accidents

    International Nuclear Information System (INIS)

    Zhang Yan; Yue Huiguo; Lin Quanyi; Yue Feng

    2013-01-01

    This paper described the key technology of the concept of cloud computing, service type and implementation methods. Combined with the upgrade demand of nuclear accident emergency system platform, the paper also proposed the application design of private cloud computing platform, analyzed safety of cloud platform and the characteristics of cloud disaster recovery. (authors)

  11. Innovative Design of Agricultural Cross-border E-commerce Management Platform Construction between Hainan and Taiwan

    Science.gov (United States)

    Song, Jun; Gao, Yanli

    2018-02-01

    The essay is based on the subject research between Hainan and Tai league, by analyzing the comparison of agricultural development between Hainan and other Chinese areas, finds that Hainan agricultural develops slowly. Meanwhile, by using the experience and technology of Taiwan agricultural development for reference, taking full advantage of modern internet technology, we try to find the complementary opportunity of agricultural technology, experience in agricultural development between Hainan and Taiwan. Therefore, by combining the existing resources of Hainan and Taiwan, following the thoughts of the “Internet+ Agriculture”, the essay tries to work out an innovative designation of agricultural cross-border e-commerce management platform, integrate the resource advantages of Hainan and Taiwan, specify the functions of newly designed management platform.

  12. Bacterial diversity in water injection systems of Brazilian offshore oil platforms.

    Science.gov (United States)

    Korenblum, Elisa; Valoni, Erika; Penna, Mônica; Seldin, Lucy

    2010-01-01

    Biogenic souring and microbial-influenced corrosion is a common scenario in water-flooded petroleum reservoirs. Water injection systems are continuously treated to control bacterial contamination, but some bacteria that cause souring and corrosion can persist even after different treatments have been applied. Our aim was to increase our knowledge of the bacterial communities that persist in the water injection systems of three offshore oil platforms in Brazil. To achieve this goal, we used a culture-independent molecular approach (16S ribosomal RNA gene clone libraries) to analyze seawater samples that had been subjected to different treatments. Phylogenetic analyses revealed that the bacterial communities from the different platforms were taxonomically different. A predominance of bacterial clones affiliated with Gammaproteobacteria, mostly belonging to the genus Marinobacter (60.7%), were observed in the platform A samples. Clones from platform B were mainly related to the genera Colwellia (37.9%) and Achromobacter (24.6%), whereas clones obtained from platform C were all related to unclassified bacteria. Canonical correspondence analyses showed that different treatments such as chlorination, deoxygenation, and biocide addition did not significantly influence the bacterial diversity in the platforms studied. Our results demonstrated that the injection water used in secondary oil recovery procedures contained potentially hazardous bacteria, which may ultimately cause souring and corrosion.

  13. Designing the RiverCare knowledge base and web-collaborative platform to exchange knowledge in river management

    Science.gov (United States)

    Cortes Arevalo, Juliette; den Haan, Robert-Jan; van der Voort, Mascha; Hulscher, Suzanne

    2016-04-01

    Effective communication strategies are necessary between different scientific disciplines, practitioners and non-experts for a shared understanding and better implementation of river management measures. In that context, the RiverCare program aims to get a better understanding of riverine measures that are being implemented towards self-sustaining multifunctional rivers in the Netherlands. During the RiverCare program, user committees are organized between the researchers and practitioners to discuss the aim and value of RiverCare outputs, related assumptions and uncertainties behind scientific results. Beyond the RiverCare program end, knowledge about river interventions, integrated effects, management and self-sustaining applications will be available to experts and non-experts by means of River Care communication tools: A web-collaborative platform and a serious gaming environment. As part of the communication project of RiverCare, we are designing the RiverCare web-collaborative platform and the knowledge-base behind that platform. We aim at promoting collaborative efforts and knowledge exchange in river management. However, knowledge exchange does not magically happen. Consultation and discussion of RiverCare outputs as well as elicitation of perspectives and preferences from different actors about the effects of riverine measures has to be facilitated. During the RiverCare research activities, the platform will support the user committees or collaborative sessions that are regularly held with the organizations directly benefiting from our research, at project level or in study areas. The design process of the collaborative platform follows an user centred approach to identify user requirements, co-create a conceptual design and iterative develop and evaluate prototypes of the platform. The envisioned web-collaborative platform opens with an explanation and visualisation of the RiverCare outputs that are available in the knowledge base. Collaborative sessions

  14. Investigating the Users’ Approach to ICT Platforms in the City Management

    Directory of Open Access Journals (Sweden)

    Francesco Caputo

    2017-01-01

    Full Text Available The increasing relevance of technology and its impact on our everyday life requires multi- and trans-disciplinary studies in order to investigate the ways in which the Information and Communication Technology (ICT tools are affected by users’ features and by the external environment. In order to enrich existing contributions on this topic, the paper focuses its attention on the city as example of service systems, in order to investigate dimensions and dynamics that influence the city employees’ evaluation and satisfaction in the use of ICT platforms. By adopting the interpretative lens offered by Service Science and Systems Thinking, the domain of city as a service system is analysed and some hypotheses are formulated with reference to the relationships between environment, users, and ICT platform. The hypotheses are investigated through a questionnaire survey on a sample of 1032 municipalities in the Czech Republic and the results are tested using Structural Equation Modelling. The research shows that users’ features and external environment affect the evaluation and the satisfaction of city stakeholders about the use of ICT platforms by underlining the need for enlarging the study on informatics tools, in order to also include subjective variables. The findings are discussed from both theoretical and practical points of view.

  15. A Vehicle Management End-to-End Testing and Analysis Platform for Validation of Mission and Fault Management Algorithms to Reduce Risk for NASA's Space Launch System

    Science.gov (United States)

    Trevino, Luis; Patterson, Jonathan; Teare, David; Johnson, Stephen

    2015-01-01

    integrates specific M&FM algorithms, specialized nominal and off-nominal test cases, and vendor-supplied physics-based launch vehicle subsystem models. Additionally, the team has developed processes for implementing and validating these algorithms for concept validation and risk reduction for the SLS program. The flexibility of the Vehicle Management End-to-end Testbed (VMET) enables thorough testing of the M&FM algorithms by providing configurable suites of both nominal and off-nominal test cases to validate the developed algorithms utilizing actual subsystem models such as MPS. The intent of VMET is to validate the M&FM algorithms and substantiate them with performance baselines for each of the target vehicle subsystems in an independent platform exterior to the flight software development infrastructure and its related testing entities. In any software development process there is inherent risk in the interpretation and implementation of concepts into software through requirements and test cases into flight software compounded with potential human errors throughout the development lifecycle. Risk reduction is addressed by the M&FM analysis group working with other organizations such as S&MA, Structures and Environments, GNC, Orion, the Crew Office, Flight Operations, and Ground Operations by assessing performance of the M&FM algorithms in terms of their ability to reduce Loss of Mission and Loss of Crew probabilities. In addition, through state machine and diagnostic modeling, analysis efforts investigate a broader suite of failure effects and associated detection and responses that can be tested in VMET to ensure that failures can be detected, and confirm that responses do not create additional risks or cause undesired states through interactive dynamic effects with other algorithms and systems. VMET further contributes to risk reduction by prototyping and exercising the M&FM algorithms early in their implementation and without any inherent hindrances such as meeting FSW

  16. THE PERFORMANCE ANALYSIS OF A UAV BASED MOBILE MAPPING SYSTEM PLATFORM

    Directory of Open Access Journals (Sweden)

    M. L. Tsai

    2013-08-01

    Full Text Available To facilitate applications such as environment detection or disaster monitoring, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG based fixed-wing Unmanned Aerial Vehicle (UAV photogrammetric platform where an Inertial Navigation System (INS/Global Positioning System (GPS integrated Positioning and Orientation System (POS system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP. The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 m with 300 m flight height. The positioning accuracy in the z axis is less than 10 m. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP generation, and feature point measurements, is less than one hour.

  17. The Performance Analysis of a Uav Based Mobile Mapping System Platform

    Science.gov (United States)

    Tsai, M. L.; Chiang, K. W.; Lo, C. F.; Ch, C. H.

    2013-08-01

    To facilitate applications such as environment detection or disaster monitoring, the development of rapid low cost systems for collecting near real-time spatial information is very critical. Rapid spatial information collection has become an emerging trend for remote sensing and mapping applications. This study develops a Direct Georeferencing (DG) based fixed-wing Unmanned Aerial Vehicle (UAV) photogrammetric platform where an Inertial Navigation System (INS)/Global Positioning System (GPS) integrated Positioning and Orientation System (POS) system is implemented to provide the DG capability of the platform. The performance verification indicates that the proposed platform can capture aerial images successfully. A flight test is performed to verify the positioning accuracy in DG mode without using Ground Control Points (GCP). The preliminary results illustrate that horizontal DG positioning accuracies in the x and y axes are around 5 m with 300 m flight height. The positioning accuracy in the z axis is less than 10 m. Such accuracy is good for near real-time disaster relief. The DG ready function of proposed platform guarantees mapping and positioning capability even in GCP free environments, which is very important for rapid urgent response for disaster relief. Generally speaking, the data processing time for the DG module, including POS solution generalization, interpolation, Exterior Orientation Parameters (EOP) generation, and feature point measurements, is less than one hour.

  18. Jenkins-CI, an Open-Source Continuous Integration System, as a Scientific Data and Image-Processing Platform

    Science.gov (United States)

    Moutsatsos, Ioannis K.; Hossain, Imtiaz; Agarinis, Claudia; Harbinski, Fred; Abraham, Yann; Dobler, Luc; Zhang, Xian; Wilson, Christopher J.; Jenkins, Jeremy L.; Holway, Nicholas; Tallarico, John; Parker, Christian N.

    2016-01-01

    High-throughput screening generates large volumes of heterogeneous data that require a diverse set of computational tools for management, processing, and analysis. Building integrated, scalable, and robust computational workflows for such applications is challenging but highly valuable. Scientific data integration and pipelining facilitate standardized data processing, collaboration, and reuse of best practices. We describe how Jenkins-CI, an “off-the-shelf,” open-source, continuous integration system, is used to build pipelines for processing images and associated data from high-content screening (HCS). Jenkins-CI provides numerous plugins for standard compute tasks, and its design allows the quick integration of external scientific applications. Using Jenkins-CI, we integrated CellProfiler, an open-source image-processing platform, with various HCS utilities and a high-performance Linux cluster. The platform is web-accessible, facilitates access and sharing of high-performance compute resources, and automates previously cumbersome data and image-processing tasks. Imaging pipelines developed using the desktop CellProfiler client can be managed and shared through a centralized Jenkins-CI repository. Pipelines and managed data are annotated to facilitate collaboration and reuse. Limitations with Jenkins-CI (primarily around the user interface) were addressed through the selection of helper plugins from the Jenkins-CI community. PMID:27899692

  19. Jenkins-CI, an Open-Source Continuous Integration System, as a Scientific Data and Image-Processing Platform.

    Science.gov (United States)

    Moutsatsos, Ioannis K; Hossain, Imtiaz; Agarinis, Claudia; Harbinski, Fred; Abraham, Yann; Dobler, Luc; Zhang, Xian; Wilson, Christopher J; Jenkins, Jeremy L; Holway, Nicholas; Tallarico, John; Parker, Christian N

    2017-03-01

    High-throughput screening generates large volumes of heterogeneous data that require a diverse set of computational tools for management, processing, and analysis. Building integrated, scalable, and robust computational workflows for such applications is challenging but highly valuable. Scientific data integration and pipelining facilitate standardized data processing, collaboration, and reuse of best practices. We describe how Jenkins-CI, an "off-the-shelf," open-source, continuous integration system, is used to build pipelines for processing images and associated data from high-content screening (HCS). Jenkins-CI provides numerous plugins for standard compute tasks, and its design allows the quick integration of external scientific applications. Using Jenkins-CI, we integrated CellProfiler, an open-source image-processing platform, with various HCS utilities and a high-performance Linux cluster. The platform is web-accessible, facilitates access and sharing of high-performance compute resources, and automates previously cumbersome data and image-processing tasks. Imaging pipelines developed using the desktop CellProfiler client can be managed and shared through a centralized Jenkins-CI repository. Pipelines and managed data are annotated to facilitate collaboration and reuse. Limitations with Jenkins-CI (primarily around the user interface) were addressed through the selection of helper plugins from the Jenkins-CI community.

  20. Implementation and management of a biomedical observation dictionary in a large healthcare information system.

    Science.gov (United States)

    Vandenbussche, Pierre-Yves; Cormont, Sylvie; André, Christophe; Daniel, Christel; Delahousse, Jean; Charlet, Jean; Lepage, Eric

    2013-01-01

    This study shows the evolution of a biomedical observation dictionary within the Assistance Publique Hôpitaux Paris (AP-HP), the largest European university hospital group. The different steps are detailed as follows: the dictionary creation, the mapping to logical observation identifier names and codes (LOINC), the integration into a multiterminological management platform and, finally, the implementation in the health information system. AP-HP decided to create a biomedical observation dictionary named AnaBio, to map it to LOINC and to maintain the mapping. A management platform based on methods used for knowledge engineering has been put in place. It aims at integrating AnaBio within the health information system and improving both the quality and stability of the dictionary. This new management platform is now active in AP-HP. The AnaBio dictionary is shared by 120 laboratories and currently includes 50 000 codes. The mapping implementation to LOINC reaches 40% of the AnaBio entries and uses 26% of LOINC records. The results of our work validate the choice made to develop a local dictionary aligned with LOINC. This work constitutes a first step towards a wider use of the platform. The next step will support the entire biomedical production chain, from the clinician prescription, through laboratory tests tracking in the laboratory information system to the communication of results and the use for decision support and biomedical research. In addition, the increase in the mapping implementation to LOINC ensures the interoperability allowing communication with other international health institutions.

  1. Research on the full life cycle management system of smart electric energy meter

    Science.gov (United States)

    Chen, Xiangqun; Huang, Rui; Shen, Liman; Guo, Dingying; Xiong, Dezhi; Xiao, Xiangqi; Liu, Mouhai; Renheng, Xu

    2018-02-01

    At present, China’s smart electric energy meter life management is started from the procurement and acceptance. The related monitoring and management of the manufacturing sector has not yet been carried out. This article applies RFID technology and network cloud platform to full life cycle management system of smart electric energy meters, builds this full life cycle management system including design and manufacturing, process control, measurement and calibration testing, storage management, user acceptance, site operation, maintenance scrap and other aspects. Exploring smart electric energy meters on-line and off-line communication by the application of active RFID communication functions, and the actual functional application such as local data exchange and instrument calibration. This system provides technical supports on power demand side management and the improvement of smart electric energy meter reliability evaluation system.

  2. Full scale test platform for European TBM systems integration and maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Vála, Ladislav, E-mail: ladislav.vala@cvrez.cz; Reungoat, Mathieu; Vician, Martin

    2016-11-01

    Highlights: • A platform for EU-TBS maintenance and integration tests is described. • Its modular design allows adaptation to non-EU TBSs. • Assembling of the facility will be followed by initial tests in 2016. - Abstract: This article deals with description and current status of a project of a non-nuclear, full size (1:1 scale) test platform dedicated to tests, optimization and validation of integration and maintenance operations for the European TBM systems in the ITER port cell #16. The facility called TBM platform reproduces the ITER port cell #16 and port interspace with all the relevant interfaces and mock-ups of the corresponding main components. Thanks to the modular design of the platform, it is possible to adapt or change completely the interfaces in the future if needed or required according to the updated configuration of TBSs. In the same way, based on customer requirements, it will be possible to adapt the interfaces and piping inside the mock-ups in order to represent also the other, non-EU configurations of TBM systems designed for port cells #02 and #18. Construction of this test platform is realized and funded within the scope of the SUSEN project.

  3. Product Platform Performance

    DEFF Research Database (Denmark)

    Munk, Lone

    The aim of this research is to improve understanding of platform-based product development by studying platform performance in relation to internal effects in companies. Platform-based product development makes it possible to deliver product variety and at the same time reduce the needed resources...... engaging in platform-based product development. Similarly platform assessment criteria lack empirical verification regarding relevance and sufficiency. The thesis focuses on • the process of identifying and estimating internal effects, • verification of performance of product platforms, (i...... experienced representatives from the different life systems phase systems of the platform products. The effects are estimated and modeled within different scenarios, taking into account financial and real option aspects. The model illustrates and supports estimation and quantification of internal platform...

  4. qPortal: A platform for data-driven biomedical research.

    Science.gov (United States)

    Mohr, Christopher; Friedrich, Andreas; Wojnar, David; Kenar, Erhan; Polatkan, Aydin Can; Codrea, Marius Cosmin; Czemmel, Stefan; Kohlbacher, Oliver; Nahnsen, Sven

    2018-01-01

    Modern biomedical research aims at drawing biological conclusions from large, highly complex biological datasets. It has become common practice to make extensive use of high-throughput technologies that produce big amounts of heterogeneous data. In addition to the ever-improving accuracy, methods are getting faster and cheaper, resulting in a steadily increasing need for scalable data management and easily accessible means of analysis. We present qPortal, a platform providing users with an intuitive way to manage and analyze quantitative biological data. The backend leverages a variety of concepts and technologies, such as relational databases, data stores, data models and means of data transfer, as well as front-end solutions to give users access to data management and easy-to-use analysis options. Users are empowered to conduct their experiments from the experimental design to the visualization of their results through the platform. Here, we illustrate the feature-rich portal by simulating a biomedical study based on publically available data. We demonstrate the software's strength in supporting the entire project life cycle. The software supports the project design and registration, empowers users to do all-digital project management and finally provides means to perform analysis. We compare our approach to Galaxy, one of the most widely used scientific workflow and analysis platforms in computational biology. Application of both systems to a small case study shows the differences between a data-driven approach (qPortal) and a workflow-driven approach (Galaxy). qPortal, a one-stop-shop solution for biomedical projects offers up-to-date analysis pipelines, quality control workflows, and visualization tools. Through intensive user interactions, appropriate data models have been developed. These models build the foundation of our biological data management system and provide possibilities to annotate data, query metadata for statistics and future re-analysis on

  5. Vehicle health management for guidance, navigation and control systems

    Science.gov (United States)

    Radke, Kathleen; Frazzini, Ron; Bursch, Paul; Wald, Jerry; Brown, Don

    1993-01-01

    The objective of the program was to architect a vehicle health management (VHM) system for space systems avionics that assures system readiness for launch vehicles and for space-based dormant vehicles. The platforms which were studied and considered for application of VHM for guidance, navigation and control (GN&C) included the Advanced Manned Launch System (AMLS), the Horizontal Landing-20/Personnel Launch System (HL-20/PLS), the Assured Crew Return Vehicle (ACRV) and the Extended Duration Orbiter (EDO). This set was selected because dormancy and/or availability requirements are driving the designs of these future systems.

  6. AEGIS: a wildfire prevention and management information system

    Science.gov (United States)

    Kalabokidis, Kostas; Ager, Alan; Finney, Mark; Athanasis, Nikos; Palaiologou, Palaiologos; Vasilakos, Christos

    2016-03-01

    We describe a Web-GIS wildfire prevention and management platform (AEGIS) developed as an integrated and easy-to-use decision support tool to manage wildland fire hazards in Greece (http://aegis.aegean.gr). The AEGIS platform assists with early fire warning, fire planning, fire control and coordination of firefighting forces by providing online access to information that is essential for wildfire management. The system uses a number of spatial and non-spatial data sources to support key system functionalities. Land use/land cover maps were produced by combining field inventory data with high-resolution multispectral satellite images (RapidEye). These data support wildfire simulation tools that allow the users to examine potential fire behavior and hazard with the Minimum Travel Time fire spread algorithm. End-users provide a minimum number of inputs such as fire duration, ignition point and weather information to conduct a fire simulation. AEGIS offers three types of simulations, i.e., single-fire propagation, point-scale calculation of potential fire behavior, and burn probability analysis, similar to the FlamMap fire behavior modeling software. Artificial neural networks (ANNs) were utilized for wildfire ignition risk assessment based on various parameters, training methods, activation functions, pre-processing methods and network structures. The combination of ANNs and expected burned area maps are used to generate integrated output map of fire hazard prediction. The system also incorporates weather information obtained from remote automatic weather stations and weather forecast maps. The system and associated computation algorithms leverage parallel processing techniques (i.e., High Performance Computing and Cloud Computing) that ensure computational power required for real-time application. All AEGIS functionalities are accessible to authorized end-users through a web-based graphical user interface. An innovative smartphone application, AEGIS App, also

  7. PRISMES. The INES microgrid platform

    Energy Technology Data Exchange (ETDEWEB)

    Barruel, F.; Vervaart, M.; Merten, J. [INES, 73 - Le Bourget-du-lac (FR). Lab. for Solar Systems (L2S)

    2010-07-01

    The massive penetration of fluctuating renewable energies will challenge the low voltage grids. Innovative solutions to address this issue need to be developed and tested. They may consist of intelligent energy management systems and the use of storage systems. For this purpose the PRISMES platform has been designed and implemented at the INES headquarter in Chambery. It is a universal test and development tool, such as stand alone hybrid systems and grid connected PV systems combined with a storage system and loads. This paper describes the PRISMES facility which will start operation in autumn 2008. (orig.)

  8. Evaluation of secure capability-based access control in the M2M local cloud platform

    DEFF Research Database (Denmark)

    Anggorojati, Bayu; Prasad, Neeli R.; Prasad, Ramjee

    2016-01-01

    delegation. Recently, the capability based access control has been considered as method to manage access in the Internet of Things (IoT) or M2M domain. In this paper, the implementation and evaluation of a proposed secure capability based access control in the M2M local cloud platform is presented......Managing access to and protecting resources is one of the important aspect in managing security, especially in a distributed computing system such as Machine-to-Machine (M2M). One such platform known as the M2M local cloud platform, referring to BETaaS architecture [1], which conceptually consists...... of multiple distributed M2M gateways, creating new challenges in the access control. Some existing access control systems lack in scalability and flexibility to manage access from users or entity that belong to different authorization domains, or fails to provide fine grained and flexible access right...

  9. An interactive ICT platform for early assessment and management of patient-reported concerns among older adults living in ordinary housing - development and feasibility.

    Science.gov (United States)

    Algilani, Samal; Langius-Eklöf, Ann; Kihlgren, Annica; Blomberg, Karin

    2017-06-01

    To develop and test feasibility and acceptability of an interactive ICT platform integrated in a tablet for collecting and managing patient-reported concerns of older adults in home care. Using different ICT applications, for example interactive tablets for self-assessment of health and health issues based on health monitoring as well as other somatic and psychiatric monitoring systems may improve quality of life, staff and patient communication and feelings of being reassured. The European Commission hypothesises that introduction of ICT applications to the older population will enable improved health. However, evidence-based and user-based applications are scarce. The design is underpinned by the Medical Research Council's complex intervention evaluation framework. A mixed-method approach was used combining interviews with older adults and healthcare professionals, and logged quantitative data. In cooperation with a health management company, a platform operated by an interactive application for reporting and managing health-related problems in real time was developed. Eight older adults receiving home care were recruited to test feasibility. They were equipped with the application and reported three times weekly over four weeks, and afterwards interviewed about their experiences. Three nurses caring for them were interviewed. The logged data were extracted as a coded file. The older adults reported as instructed, in total 107 reports (Mean 13). The most frequent concerns were pain, fatigue and dizziness. The older adults experienced the application as meaningful with overall positive effects as well as potential benefits for the nurses involved. The overall findings in this study indicated high feasibility among older adults using the ICT platform. The study's results support further development of the platform, as well as tests in full-scale studies and in other populations. An ICT platform increased the older adults' perception of involvement and facilitated

  10. MATLAB/SIMULINK platform for simulation of CANDU reactor control system

    International Nuclear Information System (INIS)

    Javidnia, H.; Jiang, J.

    2007-01-01

    In this paper a simulation platform for CANDU reactors' control system is presented. The platform is built on MATLAB/SIMULINK interactive graphical interface. Since MATLAB/SIMULINK are powerful tools to describe systems mathematically, all the subsystems in a CANDU reactor are represented in MATLAB's language and are implemented in SIMULINK graphical representation. The focus of the paper is on the flux control loop of CANDU reactors. However, the ideas can be extended to include other parts in CANDU power plants and the same technique can be applied to other types of nuclear reactors and their control systems. The CANDU reactor model and xenon feedback model are also discussed in this paper. (author)

  11. Implementation of Wireless Communications Systems on FPGA-Based Platforms

    Directory of Open Access Journals (Sweden)

    Voros NS

    2007-01-01

    Full Text Available Wireless communications are a very popular application domain. The efficient implementation of their components (access points and mobile terminals/network interface cards in terms of hardware cost and design time is of great importance. This paper describes the design and implementation of the HIPERLAN/2 WLAN system on a platform including general purpose microprocessors and FPGAs. Detailed implementation results (performance, code size, and FPGA resources utilization are presented. The main goal of the design case presented is to provide insight into the design aspects of a complex system based on FPGAs. The results prove that an implementation based on microprocessors and FPGAs is adequate for the access point part of the system where the expected volumes are rather small. At the same time, such an implementation serves as a prototyping of an integrated implementation (System-on-Chip, which is necessary for the mobile terminals of a HIPERLAN/2 system. Finally, firmware upgrades were developed allowing the implementation of an outdoor wireless communication system on the same platform.

  12. Co-simulation Platform for Train-to-Ground communications

    DEFF Research Database (Denmark)

    Yan, Ying; Bouaziz, Maha; Kassab, Mohamed

    The project SAFE4RAIL (SAFE architecture for Robust distributed Application Integration in roLling stock) from the Shift2Rail Joint Undertaking will provide a cosimulation platform based on hardware/software co-simulation. The platform will be used for Train-to-Ground (T2G) test environments...... in the context of the validation of the new wireless Train Control Management System (TCMS) transmission over LTE technologies in order to evaluate performances with realistic services and under various railway traffic conditions....

  13. Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

    International Nuclear Information System (INIS)

    Tuominen, Janne; Rasi, Teemu; Mattila, Jouni; Siuko, Mikko; Esque, Salvador; Hamilton, David

    2013-01-01

    Highlights: ► The prototype DTP2 remote handling control system is a heterogeneous collection of subsystems, each realizing a functional area of responsibility. ► Middleware provides well-known, reusable solutions to problems, such as heterogeneity, interoperability, security and dependability. ► A middleware solution was selected and integrated with the DTP2 RH control system. The middleware was successfully used to integrate all relevant subsystems and functionality was demonstrated. -- Abstract: This paper focuses on the inter-subsystem communication channels in a prototype distributed remote handling control system at Divertor Test Platform 2 (DTP2). The subsystems are responsible for specific tasks and, over the years, their development has been carried out using various platforms and programming languages. The communication channels between subsystems have different priorities, e.g. very high messaging rate and deterministic timing or high reliability in terms of individual messages. Generally, a control system's communication infrastructure should provide interoperability, scalability, performance and maintainability. An attractive approach to accomplish this is to use a standardized and proven middleware implementation. The selection of a middleware can have a major cost impact in future integration efforts. In this paper we present development done at DTP2 using the Object Management Group's (OMG) standard specification for Data Distribution Service (DDS) for ensuring communications interoperability. DDS has gained a stable foothold especially in the military field. It lacks a centralized broker, thereby avoiding a single-point-of-failure. It also includes an extensive set of Quality of Service (QoS) policies. The standard defines a platform- and programming language independent model and an interoperability wire protocol that enables DDS vendor interoperability, allowing software developers to avoid vendor lock-in situations

  14. NELS 2.0 - A general system for enterprise wide information management

    Science.gov (United States)

    Smith, Stephanie L.

    1993-01-01

    NELS, the NASA Electronic Library System, is an information management tool for creating distributed repositories of documents, drawings, and code for use and reuse by the aerospace community. The NELS retrieval engine can load metadata and source files of full text objects, perform natural language queries to retrieve ranked objects, and create links to connect user interfaces. For flexibility, the NELS architecture has layered interfaces between the application program and the stored library information. The session manager provides the interface functions for development of NELS applications. The data manager is an interface between session manager and the structured data system. The center of the structured data system is the Wide Area Information Server. This system architecture provides access to information across heterogeneous platforms in a distributed environment. There are presently three user interfaces that connect to the NELS engine; an X-Windows interface, and ASCII interface and the Spatial Data Management System. This paper describes the design and operation of NELS as an information management tool and repository.

  15. A distribution management system

    Energy Technology Data Exchange (ETDEWEB)

    Jaerventausta, P; Verho, P; Kaerenlampi, M; Pitkaenen, M [Tampere Univ. of Technology (Finland); Partanen, J [Lappeenranta Univ. of Technology (Finland)

    1998-08-01

    vendors of the other systems. In our research project this alternative is preferred and used in developing an independent distribution management system. This text describes the basic models and functions of the intelligent distribution management system, which has been developed in the research project. The basic platform was developed by the end of 1995. In 1996 and 1997 new applications (e.g automatic switchings) have been developed, the domain has been enlarged to comprise the low-voltage networks and subtransmission networks, and the computer system integration has been extended (e.g. full-duplex communication with the SCADA, open relational database connection with the AM/FM/GIS). The chapter gives a general description of the distribution management system as a whole

  16. Study on integrated design and analysis platform of NPP

    International Nuclear Information System (INIS)

    Lu Dongsen; Gao Zuying; Zhou Zhiwei

    2001-01-01

    Many calculation software have been developed to nuclear system's design and safety analysis, such as structure design software, fuel design and manage software, thermal hydraulic analysis software, severe accident simulation software, etc. This study integrates those software to a platform, develops visual modeling tool for Retran, NGFM90. And in this platform, a distribution calculation method is also provided for couple calculation between different software. The study will improve the design and analysis of NPP

  17. Performance testing of the finance platform based on LoadRunner

    Directory of Open Access Journals (Sweden)

    CHEN Mengyun

    2016-08-01

    Full Text Available In this paper,a performance testing scheme is designed to test the software interface of the financial management platform based on LoadRunner,and the scheme has been used for the performance testing of the interactive interface of the financial management platform of Shanghai Zuo Hao Network Technology Co.Ltd.The result shows that the performance characteristics of the system interface are different under different scenarios,and TPS and CPU usage performance characteristics are in an optimal status when the number of concurrent users is 40,while CPU becomes the bottleneck which is need to be addressed by system when the number of concurrent users is 50.At last,the effectiveness of the scheme has been proved.

  18. Intelligent Digitized Design Systems for the Management of Design Knowledge Related to Nuclear R&D Institutes

    International Nuclear Information System (INIS)

    Zheng, M.; Minglu, W.

    2016-01-01

    Full text: Nuclear R&D is highly knowledge-intensive. With the rapid advent and development of modern information technology, knowledge management in nuclear industry has been provided with new approaches and possibilities. This article introduces a framework of intelligent digitized design system in nuclear R&D phase and finds answer to knowledge application, internal process optimization, experience feedback and further innovation. This framework utilizing digitalization and informatization finds a way to incorporate the process of the “Socialization, Externalization, Combination, Internalization” (SECI) model which include intelligent design process, integrated design software, smart verification and validation simulation platform, experiment data management platform, online monitoring platform and digital twin nuclear power plant, etc. The following case study gives a clear picture of what and how knowledge management has been performed under this framework. Furthermore, important lessons have been summarized. (author

  19. Platform development supportedby gaming

    DEFF Research Database (Denmark)

    Mikkola, Juliana Hsuan; Hansen, Poul H. Kyvsgård

    2007-01-01

    The challenge of implementing industrial platforms in practice can be described as a configuration problem caused by high number of variables, which often have contradictory influences on the total performance of the firm. Consequently, the specific platform decisions become extremely complex......, possibly increasing the strategic risks for the firm. This paper reports preliminary findings on platform management process at LEGO, a Danish toy company.  Specifically, we report the process of applying games combined with simulations and workshops in the platform development. We also propose a framework...

  20. Early Warning System for reducing disaster risk: the technological platform DEWETRA for the Republic of Serbia

    Science.gov (United States)

    Massabo, Marco; Molini, Luca; Kostic, Bojan; Campanella, Paolo; Stevanovic, Slavimir

    2015-04-01

    Disaster risk reduction has long been recognized for its role in mitigating the negative environmental, social and economic impacts of natural hazards. Flood Early Warning System is a disaster risk reduction measure based on the capacities of institutions to observe and predict extreme hydro-meteorological events and to disseminate timely and meaningful warning information; it is furthermore based on the capacities of individuals, communities and organizations to prepare and to act appropriately and in sufficient time to reduce the possibility of harm or loss. An operational definition of an Early Warning System has been suggested by ISDR - UN Office for DRR [15 January 2009]: "EWS is the set of capacities needed to generate and disseminate timely and meaningful warning information to enable individuals, communities and organizations threatened by a hazard to prepare and to act appropriately and in sufficient time to reduce the possibility of harm or loss.". ISDR continues by commenting that a people-centered early warning system necessarily comprises four key elements: 1-knowledge of the risks; 2-monitoring, analysis and forecasting of the hazards; 3-communication or dissemination of alerts and warnings; and 4- local capabilities to respond to the warnings received." The technological platform DEWETRA supports the strengthening of the first three key elements of EWS suggested by ISDR definition, hence to improve the capacities to build real-time risk scenarios and to inform and warn the population in advance The technological platform DEWETRA has been implemented for the Republic of Serbia. DEWETRA is a real time-integrate system that supports decision makers for risk forecasting and monitoring and for distributing warnings to end-user and to the general public. The system is based on the rapid availability of different data that helps to establish up-to-date and reliable risk scenarios. The integration of all relevant data for risk management significantly

  1. Communication and Jamming BDA of OFDMA Communication Systems Using the Software Defined Radio Platform WARP

    Science.gov (United States)

    2015-03-01

    COMMUNICATION AND JAMMING BDA OF OFDMA COMMUNICATION SYSTEMS USING THE SOFTWARE DEFINED RADIO PLATFORM WARP THESIS Kate J. Yaxley, FLTLT, Royal... BDA OF OFDMA COMMUNICATION SYSTEMS USING THE SOFTWARE DEFINED RADIO PLATFORM WARP THESIS Presented to the Faculty Department of Electrical and...COMMUNICATION AND JAMMING BDA OF OFDMA COMMUNICATION SYSTEMS USING THE SOFTWARE DEFINED RADIO PLATFORM WARP THESIS Kate J. Yaxley, B.E. (Elec) Hons Div II

  2. Renewable energy systems: A societal and technological platform

    Energy Technology Data Exchange (ETDEWEB)

    Polatidis, Heracles; Haralambopoulos, Dias A. [University of the Aegean, Mytilene (Greece). Department of Environment

    2007-02-15

    Today, the analysis of renewable energy places the emphasis on the technological and economic attributes with social and environmental impact assessment providing for a rather static, narrow frame of analysis. The participation and response of social actors and other stakeholders is usually of a traditional type, with consultation documents and public meetings, collection of complaints and suggestion schemes. This often encourages parochialism and an over-concentration on relatively trivial issues. It is, therefore, imperative to establish a new participatory planning platform to incorporate the wider socio-economic aspects of renewable energy systems and to provide for an operational analytical decomposition of them. In this work the issue of decomposition analysis is clarified, and a new agenda for the societal and technological decomposition analysis of renewable energy systems is developed. A case study is disclosed to present the relevance of the established platform for integrated (renewable) energy systems planning. Innovative aspects comprise of the simultaneous inclusion of decision analysis and social acceptance methods and tools in concert with the related public participation techniques. (author)

  3. A System for Managing Critical Knowledge for Accelerator Subsystems: Pansophy

    International Nuclear Information System (INIS)

    C. Reece; V. Bookwalter; B. Madre

    2001-01-01

    Accelerator development and construction projects often intentionally push the envelope of well-established technical performance and manageable complexity. In addition, the desire for efficient retention and exploitation of accumulated experience across the multi-decade life cycles of major installations calls for a robust, yet user-friendly knowledge management system. To meet these needs, we are presently deploying a new web-based system at Jefferson Lab: Pansophy. This system is a custom integration of several commercial software utilities, DocushareTM, ColdFusionTM, MatlabTM, IngresTM, and common desktop programs. Users of the system range from process managers, shop-floor technicians, test engineers, to after-the-fact data miners and operations staff. The system integrates important QA elements of procedural control, automated data accumulation into a secured central database, prompt and reliable data query and retrieval, and online analysis tools, all accessed by the user via their platform-independent web browser. A system overview, completed pilot project, and implementation experience to date will be presented

  4. Workstations for the wellsite; An integrated information management system

    Energy Technology Data Exchange (ETDEWEB)

    Morley, A.R. (Exlog Inc. (US))

    1991-03-01

    This paper describes and innovative management system designed to assist well drilling, engineering, and geological decision makers. The problem of providing powerful and flexible applications without creating complexity has been solved by an intuitive graphical user interface. Through the adoption of petroleum industry standards, an open system was designed to facilitate information input and output. Careful attention to emerging computer standards has resulted in a system that is portable across a wide range of current hardware from multiple vendors and that will be easily movable to new hardware platforms as they become available.

  5. Aero-hydro-elastic simulation platform for wave energy systems and floating wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Kallesoee, B.S.

    2011-01-15

    This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world's first combined wave and wind energy platform. The floating energy conversion platform, Poseidon, is owned and operated by Floating Power Plant A/S. The platform has been operating for two test periods; one period where it was operating as a wave energy conversion platform only and one period where the three turbines was mounted and the platform operated as a combined wind and wave energy platform. The PSO project has equipped the platform with comprehensive measurements equipment for measuring platform motion, wave and wind conditions and turbine loads. Data from the first test period has been used for determine if the turbine could be mounted on the platform. Preliminary analysis of data from the second test period indicates that the platform is suitable as wind turbine foundation and that the turbines reduce the platform motion. (Author)

  6. Research on systematization and advancement of shipbuilding production management for flexible and agile response for high value offshore platform

    Science.gov (United States)

    Song, Young-Joo; Woo, Jong-Hun; Shin, Jong-Gye

    2011-09-01

    Recently, the speed of change related with enterprise management is getting faster than ever owing to the competition among companies, technique diffusion, shortening of product lifecycle, excessive supply of market. For the example, the compliance condition (such as delivery date, product quality, etc.) from the ship owner is getting complicated and the needs for the new product such as FPSO, FSRU are coming to fore. This paradigm shift emphasize the rapid response rather than the competitive price, flexibility and agility rather than effective and optimal perspective for the domestic shipbuilding company. So, domestic shipbuilding companies have to secure agile and flexible ship production environment that could respond change of market and requirements of customers in order to continue a competitive edge in the world market. In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

  7. The Health Systems Funding Platform: Is this where we thought we were going?

    Directory of Open Access Journals (Sweden)

    Ooms Gorik

    2011-05-01

    Full Text Available Abstract Background In March 2009, the Task Force for Innovative International Financing for Health Systems recommended "a health systems funding platform for the Global Fund, GAVI Alliance, the World Bank and others to coordinate, mobilize, streamline and channel the flow of existing and new international resources to support national health strategies." Momentum to establish the Health Systems Funding Platform was swift, with the World Bank convening a Technical Workshop on Health Systems Strengthening (HSS, and serial meetings organized to progress the agenda. Despite its potential significance, there has been little comment in peer-reviewed literature, though some disquiet in the international development community around the scope of the Platform and the capacity of the partners, which appears disproportionate to the available information. Methods This case study uses documentary analysis, participant observation and 24 in-depth interviews to examine the processes of development and key issues raised by the Platform. Results The findings show a fluid and volatile process, with debate over whether ongoing engagement in HSS by Global Fund and GAVI represents a dilution of organizational focus, risking ongoing support, or a paradigm shift that facilitates the achievement of targeted objectives, builds systems capacity, and will attract additional resources. Uncertainty in the development of the Platform reflects the flexibility of the recently formed global health initiatives, and the instability of donor commitments, particularly in the current financial climate. But implicit in the conflict is tension between key global stakeholders over defining and ownership of the health systems agenda. Conclusions The tensions appear to have been resolved through a focus on national planning, applying International Health Partnership principles, though the global financial crisis and key personnel changes may yet alter outcomes. Despite its dynamic

  8. Document Management and Exchange System – Supporting Education Process

    Directory of Open Access Journals (Sweden)

    Emil Egredzija

    2010-03-01

    Full Text Available Development and implementation of new technologies are very important in education. One of the most challenging tasks in the education process is to build efficient and cost-friendly system for content management and exchange. The system has to be reliable, easy manageable and open. Centralized storage, secured access, and ubiquitous client technologies have emerged as best-practice solutions in engineering that kind of services. Users can easily publish or exchange documents and not need to worry about their distribution, storage or technical skills required for efficient document management. The system that will be presented is built on open source technologies and is deployable on all today's popular web software platforms. The web server, the programming language and operating system that are used to build and deploy such a system are all non-proprietary and completely open because our mission was to build system that can be easily extended and not limited by its corporate license. The system uses security mechanisms such as user group access policy, operating system level security (file system and secured data storage in database. Because of the growing need for document management in education process we believe that this project will find its place in practice.

  9. Faculty Technology Usage Resulting from Institutional Migration to a New Learning Management System

    Science.gov (United States)

    Rucker, Ryan; Downey, Steve

    2016-01-01

    Research literature is flush with articles discussing how teachers use individual learning management systems. However, very few studies examine how faculty are affected as they move from one platform to another. This study addresses that gap and examines how faculty adapt their online teaching practices as they migrate systems. In doing so,…

  10. Design of investment management optimization system for power grid companies under new electricity reform

    Science.gov (United States)

    Yang, Chunhui; Su, Zhixiong; Wang, Xin; Liu, Yang; Qi, Yongwei

    2017-03-01

    The new normalization of the economic situation and the implementation of a new round of electric power system reform put forward higher requirements to the daily operation of power grid companies. As an important day-to-day operation of power grid companies, investment management is directly related to the promotion of the company's operating efficiency and management level. In this context, the establishment of power grid company investment management optimization system will help to improve the level of investment management and control the company, which is of great significance for power gird companies to adapt to market environment changing as soon as possible and meet the policy environment requirements. Therefore, the purpose of this paper is to construct the investment management optimization system of power grid companies, which includes investment management system, investment process control system, investment structure optimization system, and investment project evaluation system and investment management information platform support system.

  11. Development of Testing Platform for Digital I and C System in Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Park, G. Y.; Kim, Y. M.; Jeong, C. H. [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2013-10-15

    According to digitalization of the NPP (Nuclear Power Plant) I and C (Instrumentation and Control) system, cyber threats against I and C system are increased. Moreover, the complexity of I and C system are increased due to adopt the up-to-date technologies (i. e., smart sensor, wireless network, and Field Programmable Gate Array / Complex Programmable Logic Device) into NPP's I and C system. For example, new issues such as cyber threat are introduced from digitalized I and C systems and components to replace obsolete analog equipment in existing NPPs. Furthermore, use of wireless communication, FPGA/CPLD, and smart sensor could introduce new considerations such as Defense-in-Depth and Diversity. Therefore, the proof testing for digital I and C system is required to verify the adverse effect from use of up-to-date digital technologies and identify the criteria to resolve and mitigate (or prevent) the (possibility of) effects. The objective of this study is developing the Testing Platform for the proof testing. The digital I and C System Test Platform is implemented using test platform hardware, component software, and architectural design. The digital I and C testing platform includes the safety-related PLC and relevant ladder logics, Windows-based C++ codes for host PC. For software, there are seven spike models to confirm the each module's functionality and generate/monitor the signals to/from PLCs. For future work, digital I and C System Test Platform architecture will be implemented using spike models. And a set of acceptance test against cyber security, smart sensor, wireless network, and FPGA/CPLD will be conducted using digital I and C System Test Platform.

  12. Development of Testing Platform for Digital I and C System in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Park, G. Y.; Kim, Y. M.; Jeong, C. H.

    2013-01-01

    According to digitalization of the NPP (Nuclear Power Plant) I and C (Instrumentation and Control) system, cyber threats against I and C system are increased. Moreover, the complexity of I and C system are increased due to adopt the up-to-date technologies (i. e., smart sensor, wireless network, and Field Programmable Gate Array / Complex Programmable Logic Device) into NPP's I and C system. For example, new issues such as cyber threat are introduced from digitalized I and C systems and components to replace obsolete analog equipment in existing NPPs. Furthermore, use of wireless communication, FPGA/CPLD, and smart sensor could introduce new considerations such as Defense-in-Depth and Diversity. Therefore, the proof testing for digital I and C system is required to verify the adverse effect from use of up-to-date digital technologies and identify the criteria to resolve and mitigate (or prevent) the (possibility of) effects. The objective of this study is developing the Testing Platform for the proof testing. The digital I and C System Test Platform is implemented using test platform hardware, component software, and architectural design. The digital I and C testing platform includes the safety-related PLC and relevant ladder logics, Windows-based C++ codes for host PC. For software, there are seven spike models to confirm the each module's functionality and generate/monitor the signals to/from PLCs. For future work, digital I and C System Test Platform architecture will be implemented using spike models. And a set of acceptance test against cyber security, smart sensor, wireless network, and FPGA/CPLD will be conducted using digital I and C System Test Platform

  13. HPC - Platforms Penta Chart

    Energy Technology Data Exchange (ETDEWEB)

    Trujillo, Angelina Michelle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-08

    Strategy, Planning, Acquiring- very large scale computing platforms come and go and planning for immensely scalable machines often precedes actual procurement by 3 years. Procurement can be another year or more. Integration- After Acquisition, machines must be integrated into the computing environments at LANL. Connection to scalable storage via large scale storage networking, assuring correct and secure operations. Management and Utilization – Ongoing operations, maintenance, and trouble shooting of the hardware and systems software at massive scale is required.

  14. The COMET Sleep Research Platform.

    Science.gov (United States)

    Nichols, Deborah A; DeSalvo, Steven; Miller, Richard A; Jónsson, Darrell; Griffin, Kara S; Hyde, Pamela R; Walsh, James K; Kushida, Clete A

    2014-01-01

    The Comparative Outcomes Management with Electronic Data Technology (COMET) platform is extensible and designed for facilitating multicenter electronic clinical research. Our research goals were the following: (1) to conduct a comparative effectiveness trial (CET) for two obstructive sleep apnea treatments-positive airway pressure versus oral appliance therapy; and (2) to establish a new electronic network infrastructure that would support this study and other clinical research studies. The COMET platform was created to satisfy the needs of CET with a focus on creating a platform that provides comprehensive toolsets, multisite collaboration, and end-to-end data management. The platform also provides medical researchers the ability to visualize and interpret data using business intelligence (BI) tools. COMET is a research platform that is scalable and extensible, and which, in a future version, can accommodate big data sets and enable efficient and effective research across multiple studies and medical specialties. The COMET platform components were designed for an eventual move to a cloud computing infrastructure that enhances sustainability, overall cost effectiveness, and return on investment.

  15. Personalized Energy Reduction Cyber-Physical System (PERCS): A gamified end-user platform for energy efficiency and demand response.

    Energy Technology Data Exchange (ETDEWEB)

    Sintov, Nicole; Orosz, Michael; Schultz, P. Wesley

    2015-01-01

    The mission of the Personalized Energy Reduction Cyber-physical System (PERCS) is to create new possibilities for improving building operating efficiency, enhancing grid reliability, avoiding costly power interruptions, and mitigating greenhouse gas emissions. PERCS proposes to achieve these outcomes by engaging building occupants as partners in a user-centered smart service platform. Using a non-intrusive load monitoring approach, PERCS uses a single sensing point in each home to capture smart electric meter data in real time. The household energy signal is disaggregated into individual load signatures of common appliances (e.g., air conditioners), yielding near real-time appliance-level energy information. Users interact with PERCS via a mobile phone platform that provides household- and appliance-level energy feedback, tailored recommendations, and a competitive game tied to energy use and behavioral changes. PERCS challenges traditional energy management approaches by directly engaging occupant as key elements in a technological system.

  16. Overview and Demonstration of USEPA’s Risk-Informed Materials Management (RIMM) Tool System

    Science.gov (United States)

    The Risk-Informed Materials Management (RIMM) Tool System is a data gathering and analysis platform for conducting material disposal and beneficial use assessments. Users can evaluate risks to human and ecological receptors associated with exposures to organic and inorganic chemi...

  17. 3D shape measurement system developed on mobile platform

    Science.gov (United States)

    Wu, Zhoujie; Chang, Meng; Shi, Bowen; Zhang, Qican

    2017-02-01

    Three-dimensional (3-D) shape measurement technology based on structured light has become one hot research field inspired by the increasing requirements. Many methods have been implemented and applied in the industry applications, but most of their equipments are large and complex, cannot be portable. Meanwhile, the popularity of the smart mobile terminals, such as smart phones, provides a platform for the miniaturization and portability of this technology. The measurement system based on phase-shift algorithm and Gray-code pattern under the Android platform on a mobile phone is mainly studied and developed, and it has been encapsulated into a mobile phone application in order to reconstruct 3-D shape data in the employed smart phone easily and quickly. The experimental results of two measured object are given in this paper and demonstrate the application we developed in the mobile platform is effective.

  18. a Real-Time GIS Platform for High Sour Gas Leakage Simulation, Evaluation and Visualization

    Science.gov (United States)

    Li, M.; Liu, H.; Yang, C.

    2015-07-01

    The development of high-sulfur gas fields, also known as sour gas field, is faced with a series of safety control and emergency management problems. The GIS-based emergency response system is placed high expectations under the consideration of high pressure, high content, complex terrain and highly density population in Sichuan Basin, southwest China. The most researches on high hydrogen sulphide gas dispersion simulation and evaluation are used for environmental impact assessment (EIA) or emergency preparedness planning. This paper introduces a real-time GIS platform for high-sulfur gas emergency response. Combining with real-time data from the leak detection systems and the meteorological monitoring stations, GIS platform provides the functions of simulating, evaluating and displaying of the different spatial-temporal toxic gas distribution patterns and evaluation results. This paper firstly proposes the architecture of Emergency Response/Management System, secondly explains EPA's Gaussian dispersion model CALPUFF simulation workflow under high complex terrain and real-time data, thirdly explains the emergency workflow and spatial analysis functions of computing the accident influencing areas, population and the optimal evacuation routes. Finally, a well blow scenarios is used for verify the system. The study shows that GIS platform which integrates the real-time data and CALPUFF models will be one of the essential operational platforms for high-sulfur gas fields emergency management.

  19. Development of a Web-Enabled Informatics Platform for Manipulation of Gene Expression Data

    National Research Council Canada - National Science Library

    Peel, Sheila A; Kopydlowski, Karen; Carel, Roland

    2004-01-01

    .... The Array Repository Data Analysis System (ARDAS 1.0) at Walter Reed Army Institute of Research is a web-enabled bioinformatic platform consisting of a Laboratory Information Management System (LIMS...

  20. The design and implementation of device operation and management system based on LAMP

    International Nuclear Information System (INIS)

    Liu Shuzhen; Ma Lanxin; Qi Fazhi

    2010-01-01

    In order to manage devices with high efficiency and high quality and make it more standardized, more scientific and more modern, we use the platform of LAMP (Linux-Apache-Mysql-PHP) to develop a web-based equipment operation and management system. It uses the Browser/Server mode as the system mode and Mysql as the database to complete the function, such as query, modify, add, delete, batch import, batch export user information and device information, automatic alarm, user reviews and so on. (authors)

  1. Evaluation Models for E-Learning Platform in Riyadh City Universities (RCU with Applied of Geographical Information System (GIS

    Directory of Open Access Journals (Sweden)

    Abdulaziz I. Alharrah

    2014-12-01

    Full Text Available E-learning that integrates digital knowledge content, network and information technology has become an emerging learning method. As the e-learning platform approach is becoming an important tool to allow the flexibility and quality requested by such a kind of learning process. There is a new kind of problem faced by organizations consisting in the selection of the most suitable e-learning platform. This paper proposes evaluation model for E-Learning platform in Riyadh City universities (RCU with Applied Geographic Information System (GIS. The E-Learning platform solution selection is a multiple criteria decision-making problem that needs to be addressed objectively taking into consideration the relative weights of the criteria for any organization. We formulate the quoted multi criteria problem as a decision hierarchy to be solved using GIS. AGIS-based evaluation index system and web-based evaluating platform were established. In this paper we will show the general evaluation strategy and some obtained results using our model to evaluate some existing commercial platforms.The results of evaluation model are outlined as follows: Total weights of the proposed framework in management feature is 20.25/25, in collaborative feature is 9.2/10, in adaption learning path is 6.8/10 and in interactive learning object is 5/5. The total weights of all features are 41.25/50. In this study an evaluation model was applied on Riyadh City universities like KSU, IMAMU, NAUSS, YU and FU. Then, the results were compared with each other. The total weighs of KSU was 41. While the total weights of FU, IMAMU, YU and NAUSS was 40, 37, 36 and 32, respectively. Evaluation process shows that the proposed framework satisfied the objectives with applied GIS.

  2. Cross-Platform Technologies

    Directory of Open Access Journals (Sweden)

    Maria Cristina ENACHE

    2017-04-01

    Full Text Available Cross-platform - a concept becoming increasingly used in recent years especially in the development of mobile apps, but this consistently over time and in the development of conventional desktop applications. The notion of cross-platform software (multi-platform or platform-independent refers to a software application that can run on more than one operating system or computing architecture. Thus, a cross-platform application can operate independent of software or hardware platform on which it is execute. As a generic definition presents a wide range of meanings for purposes of this paper we individualize this definition as follows: we will reduce the horizon of meaning and we use functionally following definition: a cross-platform application is a software application that can run on more than one operating system (desktop or mobile identical or in a similar way.

  3. Computing platform to aid in decision making on energy management projects of the ELETROBRAS; Plataforma computacional para auxilio na tomada de decisao em projetos de gestao energetica da ELETROBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Assis, T.B.; Rosa, R.B.V.; Pinto, D.P.; Casagrande, C.G. [Universidade Federal de Juiz de Fora, MG (Brazil). Lab. de Eficiencia Energetica], Emails: tbassis@yahoo.com.br, tatobrasil@yahoo.com.br, casagrandejf@yahoo.com.br, danilo.pinto@ufjf.edu.br; Martins, C.C.; Cantarino, M. [Centrais Eletricas Brasileiras S.A. (ELETROBRAS), Rio de Janeiro, RJ (Brazil). Div. de Eficiencia Energetica em Edificacoes], Emails: cmartin@eletrobras.com, marcelo.cantarino@eletrobras.com

    2009-07-01

    A new tool developed by the Laboratory of Computational Efficiency Energy (LEENER), of the Federal University of Juiz de Fora (UFJF): the SP{sup 3} platform - Planning System of the Public Buildings is presented. This platform, when completed, will help Centrais Eletricas S.A. (ELETROBRAS) in meeting the demand of energetic efficiency projects for public buildings, standardizing data in order to accelerate the approval process and monitoring of a larger number of projects. This article discusses the stages of the platform development, the management methodology used, the goals and outcomes examined with the members of the PROCEL that working on this project.

  4. Adaptation of a web-based, open source electronic medical record system platform to support a large study of tuberculosis epidemiology

    Directory of Open Access Journals (Sweden)

    Fraser Hamish SF

    2012-11-01

    Full Text Available Abstract Background In 2006, we were funded by the US National Institutes of Health to implement a study of tuberculosis epidemiology in Peru. The study required a secure information system to manage data from a target goal of 16,000 subjects who needed to be followed for at least one year. With previous experience in the development and deployment of web-based medical record systems for TB treatment in Peru, we chose to use the OpenMRS open source electronic medical record system platform to develop the study information system. Supported by a core technical and management team and a large and growing worldwide community, OpenMRS is now being used in more than 40 developing countries. We adapted the OpenMRS platform to better support foreign languages. We added a new module to support double data entry, linkage to an existing laboratory information system, automatic upload of GPS data from handheld devices, and better security and auditing of data changes. We added new reports for study managers, and developed data extraction tools for research staff and statisticians. Further adaptation to handle direct entry of laboratory data occurred after the study was launched. Results Data collection in the OpenMRS system began in September 2009. By August 2011 a total of 9,256 participants had been enrolled, 102,274 forms and 13,829 laboratory results had been entered, and there were 208 users. The system is now entirely supported by the Peruvian study staff and programmers. Conclusions The information system served the study objectives well despite requiring some significant adaptations mid-stream. OpenMRS has more tools and capabilities than it did in 2008, and requires less adaptations for future projects. OpenMRS can be an effective research data system in resource poor environments, especially for organizations using or considering it for clinical care as well as research.

  5. Design challenges in nanoparticle-based platforms: Implications for targeted drug delivery systems

    Science.gov (United States)

    Mullen, Douglas Gurnett

    Characterization and control of heterogeneous distributions of nanoparticle-ligand components are major design challenges for nanoparticle-based platforms. This dissertation begins with an examination of poly(amidoamine) (PAMAM) dendrimer-based targeted delivery platform. A folic acid targeted modular platform was developed to target human epithelial cancer cells. Although active targeting was observed in vitro, active targeting was not found in vivo using a mouse tumor model. A major flaw of this platform design was that it did not provide for characterization or control of the component distribution. Motivated by the problems experienced with the modular design, the actual composition of nanoparticle-ligand distributions were examined using a model dendrimer-ligand system. High Pressure Liquid Chromatography (HPLC) resolved the distribution of components in samples with mean ligand/dendrimer ratios ranging from 0.4 to 13. A peak fitting analysis enabled the quantification of the component distribution. Quantified distributions were found to be significantly more heterogeneous than commonly expected and standard analytical parameters, namely the mean ligand/nanoparticle ratio, failed to adequately represent the component heterogeneity. The distribution of components was also found to be sensitive to particle modifications that preceded the ligand conjugation. With the knowledge gained from this detailed distribution analysis, a new platform design was developed to provide a system with dramatically improved control over the number of components and with improved batch reproducibility. Using semi-preparative HPLC, individual dendrimer-ligand components were isolated. The isolated dendrimer with precise numbers of ligands were characterized by NMR and analytical HPLC. In total, nine different dendrimer-ligand components were obtained with degrees of purity ≥80%. This system has the potential to serve as a platform to which a precise number of functional molecules

  6. A Software Development Platform for Mechatronic Systems

    DEFF Research Database (Denmark)

    Guan, Wei

    Software has become increasingly determinative for development of mechatronic systems, which underscores the importance of demands for shortened time-to-market, increased productivity, higher quality, and improved dependability. As the complexity of systems is dramatically increasing, these demands...... present a challenge to the practitioners who adopt conventional software development approach. An effective approach towards industrial production of software for mechatronic systems is needed. This approach requires a disciplined engineering process that encompasses model-driven engineering and component......-based software engineering, whereby we enable incremental software development using component models to address the essential design issues of real-time embedded systems. To this end, this dissertation presents a software development platform that provides an incremental model-driven development process based...

  7. Thermal-hydraulics for space power, propulsion, and thermal management system design

    International Nuclear Information System (INIS)

    Krotiuk, W.J.

    1990-01-01

    The present volume discusses thermal-hydraulic aspects of current space projects, Space Station thermal management systems, the thermal design of the Space Station Free-Flying Platforms, the SP-100 Space Reactor Power System, advanced multi-MW space nuclear power concepts, chemical and electric propulsion systems, and such aspects of the Space Station two-phase thermal management system as its mechanical pumped loop and its capillary pumped loop's supporting technology. Also discussed are the startup thaw concept for the SP-100 Space Reactor Power System, calculational methods and experimental data for microgravity conditions, an isothermal gas-liquid flow at reduced gravity, low-gravity flow boiling, computations of Space Shuttle high pressure cryogenic turbopump ball bearing two-phase coolant flow, and reduced-gravity condensation

  8. Design of software platform based on linux operating system for γ-spectrometry instrument

    International Nuclear Information System (INIS)

    Hong Tianqi; Zhou Chen; Zhang Yongjin

    2008-01-01

    This paper described the design of γ-spectrometry instrument software platform based on s3c2410a processor with arm920t core, emphases are focused on analyzing the integrated application of embedded linux operating system, yaffs file system and qt/embedded GUI development library. It presented a new software platform in portable instrument for γ measurement. (authors)

  9. Overview of real-time operating systems on microprocessor platforms

    International Nuclear Information System (INIS)

    Luong, T.T.

    1994-01-01

    This paper attempts to overview the real-time operating systems on microprocessor platforms in the field of experimental physics facility controls. The key issues regarding operating systems as well as standards and development environment are discussed. As an illustration, some current industrial products are indicated. Also, real-time systems operating in some institutes of the EPS/EPCS inter divisional group are reviewed. (author). 3 refs., 4 figs

  10. Development of integrated platform for computational material design

    Energy Technology Data Exchange (ETDEWEB)

    Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato [Center for Computational Science and Engineering, Fuji Research Institute Corporation (Japan); Hideaki, Koike [Advance Soft Corporation (Japan)

    2003-07-01

    The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned.

  11. Development of integrated platform for computational material design

    International Nuclear Information System (INIS)

    Kiyoshi, Matsubara; Kumi, Itai; Nobutaka, Nishikawa; Akifumi, Kato; Hideaki, Koike

    2003-01-01

    The goal of our project is to design and develop a problem-solving environment (PSE) that will help computational scientists and engineers develop large complicated application software and simulate complex phenomena by using networking and parallel computing. The integrated platform, which is designed for PSE in the Japanese national project of Frontier Simulation Software for Industrial Science, is defined by supporting the entire range of problem solving activity from program formulation and data setup to numerical simulation, data management, and visualization. A special feature of our integrated platform is based on a new architecture called TASK FLOW. It integrates the computational resources such as hardware and software on the network and supports complex and large-scale simulation. This concept is applied to computational material design and the project 'comprehensive research for modeling, analysis, control, and design of large-scale complex system considering properties of human being'. Moreover this system will provide the best solution for developing large and complicated software and simulating complex and large-scaled phenomena in computational science and engineering. A prototype has already been developed and the validation and verification of an integrated platform will be scheduled by using the prototype in 2003. In the validation and verification, fluid-structure coupling analysis system for designing an industrial machine will be developed on the integrated platform. As other examples of validation and verification, integrated platform for quantum chemistry and bio-mechanical system are planned

  12. Cloud Based Earth Observation Data Exploitation Platforms

    Science.gov (United States)

    Romeo, A.; Pinto, S.; Loekken, S.; Marin, A.

    2017-12-01

    In the last few years data produced daily by several private and public Earth Observation (EO) satellites reached the order of tens of Terabytes, representing for scientists and commercial application developers both a big opportunity for their exploitation and a challenge for their management. New IT technologies, such as Big Data and cloud computing, enable the creation of web-accessible data exploitation platforms, which offer to scientists and application developers the means to access and use EO data in a quick and cost effective way. RHEA Group is particularly active in this sector, supporting the European Space Agency (ESA) in the Exploitation Platforms (EP) initiative, developing technology to build multi cloud platforms for the processing and analysis of Earth Observation data, and collaborating with larger European initiatives such as the European Plate Observing System (EPOS) and the European Open Science Cloud (EOSC). An EP is a virtual workspace, providing a user community with access to (i) large volume of data, (ii) algorithm development and integration environment, (iii) processing software and services (e.g. toolboxes, visualization routines), (iv) computing resources, (v) collaboration tools (e.g. forums, wiki, etc.). When an EP is dedicated to a specific Theme, it becomes a Thematic Exploitation Platform (TEP). Currently, ESA has seven TEPs in a pre-operational phase dedicated to geo-hazards monitoring and prevention, costal zones, forestry areas, hydrology, polar regions, urban areas and food security. On the technology development side, solutions like the multi cloud EO data processing platform provides the technology to integrate ICT resources and EO data from different vendors in a single platform. In particular it offers (i) Multi-cloud data discovery, (ii) Multi-cloud data management and access and (iii) Multi-cloud application deployment. This platform has been demonstrated with the EGI Federated Cloud, Innovation Platform Testbed Poland

  13. Interoperability of remote handling control system software modules at Divertor Test Platform 2 using middleware

    Energy Technology Data Exchange (ETDEWEB)

    Tuominen, Janne, E-mail: janne.m.tuominen@tut.fi [Tampere University of Technology, Department of Intelligent Hydraulics and Automation, Tampere (Finland); Rasi, Teemu; Mattila, Jouni [Tampere University of Technology, Department of Intelligent Hydraulics and Automation, Tampere (Finland); Siuko, Mikko [VTT, Technical Research Centre of Finland, Tampere (Finland); Esque, Salvador [F4E, Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla2, 08019, Barcelona (Spain); Hamilton, David [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: ► The prototype DTP2 remote handling control system is a heterogeneous collection of subsystems, each realizing a functional area of responsibility. ► Middleware provides well-known, reusable solutions to problems, such as heterogeneity, interoperability, security and dependability. ► A middleware solution was selected and integrated with the DTP2 RH control system. The middleware was successfully used to integrate all relevant subsystems and functionality was demonstrated. -- Abstract: This paper focuses on the inter-subsystem communication channels in a prototype distributed remote handling control system at Divertor Test Platform 2 (DTP2). The subsystems are responsible for specific tasks and, over the years, their development has been carried out using various platforms and programming languages. The communication channels between subsystems have different priorities, e.g. very high messaging rate and deterministic timing or high reliability in terms of individual messages. Generally, a control system's communication infrastructure should provide interoperability, scalability, performance and maintainability. An attractive approach to accomplish this is to use a standardized and proven middleware implementation. The selection of a middleware can have a major cost impact in future integration efforts. In this paper we present development done at DTP2 using the Object Management Group's (OMG) standard specification for Data Distribution Service (DDS) for ensuring communications interoperability. DDS has gained a stable foothold especially in the military field. It lacks a centralized broker, thereby avoiding a single-point-of-failure. It also includes an extensive set of Quality of Service (QoS) policies. The standard defines a platform- and programming language independent model and an interoperability wire protocol that enables DDS vendor interoperability, allowing software developers to avoid vendor lock-in situations.

  14. Address-event-based platform for bioinspired spiking systems

    Science.gov (United States)

    Jiménez-Fernández, A.; Luján, C. D.; Linares-Barranco, A.; Gómez-Rodríguez, F.; Rivas, M.; Jiménez, G.; Civit, A.

    2007-05-01

    Address Event Representation (AER) is an emergent neuromorphic interchip communication protocol that allows a real-time virtual massive connectivity between huge number neurons, located on different chips. By exploiting high speed digital communication circuits (with nano-seconds timings), synaptic neural connections can be time multiplexed, while neural activity signals (with mili-seconds timings) are sampled at low frequencies. Also, neurons generate "events" according to their activity levels. More active neurons generate more events per unit time, and access the interchip communication channel more frequently, while neurons with low activity consume less communication bandwidth. When building multi-chip muti-layered AER systems, it is absolutely necessary to have a computer interface that allows (a) reading AER interchip traffic into the computer and visualizing it on the screen, and (b) converting conventional frame-based video stream in the computer into AER and injecting it at some point of the AER structure. This is necessary for test and debugging of complex AER systems. In the other hand, the use of a commercial personal computer implies to depend on software tools and operating systems that can make the system slower and un-robust. This paper addresses the problem of communicating several AER based chips to compose a powerful processing system. The problem was discussed in the Neuromorphic Engineering Workshop of 2006. The platform is based basically on an embedded computer, a powerful FPGA and serial links, to make the system faster and be stand alone (independent from a PC). A new platform is presented that allow to connect up to eight AER based chips to a Spartan 3 4000 FPGA. The FPGA is responsible of the network communication based in Address-Event and, at the same time, to map and transform the address space of the traffic to implement a pre-processing. A MMU microprocessor (Intel XScale 400MHz Gumstix Connex computer) is also connected to the FPGA

  15. Hardware in the loop simulation test platform of fuel cell backup system

    Directory of Open Access Journals (Sweden)

    Ma Tiancai

    2015-01-01

    Full Text Available Based on an analysis of voltage mechanistic model, a real-time simulation model of the proton exchange membrane (PEM fuel cell backup system is developed, and verified by the measurable experiment data. The method of online parameters identification for the model is also improved. Based on the software LabVIEW/VeriStand real-time environment and the PXI Express hardware system, the PEM fuel cell system controller hardware in the loop (HIL simulation plat-form is established. Controller simulation test results showed the accuracy of HIL simulation platform.

  16. The Drupal Environmental Information Management System Provides Standardization, Flexibility and a Platform for Collaboration

    Science.gov (United States)

    Gries, C.; Vanderbilt, K.; Reid, D.; Melendez-Colom, E.; San Gil, I.

    2013-12-01

    Over the last five years several Long-Term Ecological Research (LTER) sites have collaboratively developed a standardized yet flexible approach to ecological information management based on the open source Drupal content management system. These LTER sites adopted a common data model for basic metadata necessary to describe data sets, but also used for site management and web presence. Drupal core functionality provides web forms for easy management of information stored in this data model. Custom Drupal extensions were developed to generate XML files conforming to the Ecological Metadata Language (EML) for contribution to the LTER Network Information System (NIS) and other data archives. Each LTER site then took advantage of the flexibility Drupal provides to develop its unique web presence, choosing different themes and adding additional content to the websites. By nature, information presented is highly interlinked which can easily be modeled in Drupal entities and is further supported by a sophisticated tagging system (Fig. 1). Therefore, it is possible to provide the visitor with many different entry points to the site specific information presented. For example, publications and datasets may be grouped for each scientist, for each research project, for each major research theme at the site, making the information presented more accessible for different visitors. Experience gained during the early years was recently used to launch a complete re-write for upgrading to Drupal 7. LTER sites from multiple academic institutions pooled resources in order to partner with professional Drupal developers. Highlights of the new developments are streamlined data entry, improved EML output and integrity, support of IM workflows, a faceted data set search, a highly configurable data exploration tool with intelligent filtering and data download, and, for the mobile age, a responsive web design theme. Seven custom modules and a specific installation profile were developed

  17. A Vehicle Management End-to-End Testing and Analysis Platform for Validation of Mission and Fault Management Algorithms to Reduce Risk for NASA's Space Launch System

    Science.gov (United States)

    Trevino, Luis; Johnson, Stephen B.; Patterson, Jonathan; Teare, David

    2015-01-01

    The development of the Space Launch System (SLS) launch vehicle requires cross discipline teams with extensive knowledge of launch vehicle subsystems, information theory, and autonomous algorithms dealing with all operations from pre-launch through on orbit operations. The characteristics of these systems must be matched with the autonomous algorithm monitoring and mitigation capabilities for accurate control and response to abnormal conditions throughout all vehicle mission flight phases, including precipitating safing actions and crew aborts. This presents a large complex systems engineering challenge being addressed in part by focusing on the specific subsystems handling of off-nominal mission and fault tolerance. Using traditional model based system and software engineering design principles from the Unified Modeling Language (UML), the Mission and Fault Management (M&FM) algorithms are crafted and vetted in specialized Integrated Development Teams composed of multiple development disciplines. NASA also has formed an M&FM team for addressing fault management early in the development lifecycle. This team has developed a dedicated Vehicle Management End-to-End Testbed (VMET) that integrates specific M&FM algorithms, specialized nominal and off-nominal test cases, and vendor-supplied physics-based launch vehicle subsystem models. The flexibility of VMET enables thorough testing of the M&FM algorithms by providing configurable suites of both nominal and off-nominal test cases to validate the algorithms utilizing actual subsystem models. The intent is to validate the algorithms and substantiate them with performance baselines for each of the vehicle subsystems in an independent platform exterior to flight software test processes. In any software development process there is inherent risk in the interpretation and implementation of concepts into software through requirements and test processes. Risk reduction is addressed by working with other organizations such as S

  18. Management systems for high reliability organizations. Integration and effectiveness; Managementsysteme fuer Hochzuverlaessigkeitsorganisationen. Integration und Wirksamkeit

    Energy Technology Data Exchange (ETDEWEB)

    Mayer, Michael

    2015-03-09

    The scope of the thesis is the development of a method for improvement of efficient integrated management systems for high reliability organizations (HRO). A comprehensive analysis of severe accident prevention is performed. Severe accident management, mitigation measures and business continuity management are not included. High reliability organizations are complex and potentially dynamic organization forms that can be inherently dangerous like nuclear power plants, offshore platforms, chemical facilities, large ships or large aircrafts. A recursive generic management system model (RGM) was development based on the following factors: systemic and cybernetic Asepcts; integration of different management fields, high decision quality, integration of efficient methods of safety and risk analysis, integration of human reliability aspects, effectiveness evaluation and improvement.

  19. Demand management through centralized control system using power line communication for existing buildings

    International Nuclear Information System (INIS)

    Al-Mulla, A.; ElSherbini, A.

    2014-01-01

    Highlights: • A pilot system was developed for demand management of equipment in buildings. • The networking was based on LonWorks platform and power line communication. • Demand strategies led to load reductions up to 74% and energy savings up to 25%. • The peak load reduction is expected to reach 3.44 GW by the year 2030. - Abstract: Managing peak demand efficiently is vital for maintaining uninterrupted supply of electrical power by utility providers. In this work, a pilot system was developed for managing and controlling the demand of major power consuming equipment in buildings from a central server, while relying mostly on existing infrastructure and maintaining consumer comfort. The system was successfully demonstrated on a selected group of buildings using the LonWorks networking platform. At the building level, the system utilized power line and twisted pair communication to control the thermostats of air-conditioning (A/C) units. The higher level communication was executed through extensible markup language (XML) and simple object access protocol (SOAP). The system provided control capabilities based on A/C unit priority, thermostat temperature, building type and geographic location. The development and execution of demand management strategies for selected buildings led to peak load reductions up to 74%, in addition to energy savings up to 25%. Implementing such a system at a national level in Kuwait is estimated to reduce peak demand by 3.44 GW, amounting to capital savings of $4.13 billion. The use of existing infrastructure reduced the cost and installation time of the system. Based on the successful testing of this pilot system, a larger-scale system is being developed

  20. Four new bass strait platforms -a project manager's view

    Energy Technology Data Exchange (ETDEWEB)

    Power, J.W.

    1982-05-01

    The offshore development by Esso/BHP of the West Kingfish, Cobia, Fortescue and Flounder oil fields in the Gippsland Basin is one of the significant undertakings by the petroleum industry during the 1980s. Production from the fields will help sustain the current level of production from Bass Strait into the latter part of this decade. This paper examines some of the principal project management issues and actions involved in the planning and execution of the design and construction phases of the platforms and pipelines associated with each of these fields.

  1. Social impact assessment: identification, management and follow-up of community concerns associated with construction of the Hibernia offshore platform

    International Nuclear Information System (INIS)

    Storey, K.

    2003-01-01

    Social impact Assessment (SIA) is the systematic analysis, in advance of the likely impacts of a proposed action, that considers 'all social and cultural consequences to human populations of any public or private actions that alter the ways in which people live, work, play, relate to one another, organize to meet their needs, and generally cope as members of society' (US Department of Commerce 1994). Through the SIA for the construction of the Hibernia offshore oil platform concern, and values of local area residents were identified and a management strategy designed to minimise social disruption associated with the project. Monitoring studies showed that the strategy was effective and that few negative social impacts occurred. The Hibernia offshore oil field, was discovered on the Grand Banks, east of the island of Newfoundland, in 1979. The distance from shore (315 km), its isolation, the periodic presence of sea ice, icebergs and fog, and frequently severe wave and wind conditions, make these waters an extremely hostile work environment. Primarily to maximize human safety, the final engineering design chosen for the project was a fixed, gravity base system (GBS). The platform functions as the main drilling and production unit, the first stage processing facility, oil storage and accommodations base for the offshore crews. The concrete base of the platform, one of the five super-modules that make up the top-sides of the platform and eight of tile smaller top-sides-mounted modules, were fabricated in Newfoundland and the entire platform assembled at Bull Arm, Trinity Bay. (author)

  2. An Extensible Sensing and Control Platform for Building Energy Management

    Energy Technology Data Exchange (ETDEWEB)

    Rowe, Anthony [Carnegie Mellon Univ., Pittsburgh, PA (United States); Berges, Mario [Carnegie Mellon Univ., Pittsburgh, PA (United States); Martin, Christopher [Robert Bosch LLC, Anderson, SC (United States)

    2016-04-03

    The goal of this project is to develop Mortar.io, an open-source BAS platform designed to simplify data collection, archiving, event scheduling and coordination of cross-system interactions. Mortar.io is optimized for (1) robustness to network outages, (2) ease of installation using plug-and-play and (3) scalable support for small to large buildings and campuses.

  3. EPICS device support module as ATCA system manager for the ITER fast plant system controller

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Paulo F., E-mail: pricardofc@ipfn.ist.utl.pt [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal); Santos, Bruno; Gonçalves, Bruno; Carvalho, Bernardo B.; Sousa, Jorge; Rodrigues, A.P.; Batista, António J.N.; Correia, Miguel; Combo, Álvaro [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal); Correia, Carlos M.B.A. [Centro de Instrumentação, Departamento de Física, Universidade de Coimbra, Coimbra (Portugal); Varandas, Carlos A.F. [Associação EURATOM/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico – Universidade Técnica de Lisboa, Lisboa (Portugal)

    2013-10-15

    messages from the EPICS device support module, validates and takes proper action in order to execute and acknowledge the required command operation and respond with an operation success or error return code. Each ATCA board contains inventory data that can be retrieved by the ShM controller to determine if there is enough power available for the payload process, provide manufacturer data information, retrieve board model and serial numbers and check number of available board sensors their types and fields. The ShM can provide this inventory data information to the EPICS device support module if is required. ShM module communicates with the ATCA boards through the Intelligent Platform Management Interface (IPMI) controller via IPMI communication protocol on redundant IPMI bus. This communication protocol is managed by the embedded Intelligent Management Platform Controller (IPMC) in the ATCA board side and by the embedded Shelf Management Controller (ShMC) in the ShM side. Queried inventory data information becomes available in the EPICS device support module upon ShM command response. EPICS device support module can be a valuable and good approach for ATCA ESM aiming the integration in the ITER Control and Data Acquisition (CODAC) core system according the ITER specification.

  4. Tethered elevator and platforms as space station facilities: Systems studies and demonstrative experiments

    Science.gov (United States)

    1986-01-01

    Several key concepts of the science and applications tethered platforms were studied. Some conclusions reached are herein listed. Tether elevator and platform could improve the space station scientific and applicative capabilities. The space elevator presents unique characteristics as microgravity facility and as a tethered platform servicing vehicle. Pointing platforms could represent a new kind of observation facility for large class of payloads. The dynamical, control and technological complexity of these concepts advised demonstrative experiments. The on-going tethered satellite system offers the opportunity to perform such experiments. And feasibility studies are in progress.

  5. Development of an E-Learning Platform for Vocational Education Systems in Germany

    Science.gov (United States)

    Schober, Andreas; Müller, Frederik; Linden, Sabine; Klois, Martha; Künne, Bernd

    2014-01-01

    This paper describes an existing web-based learning platform named "Third Place of Learning" (TPL)--"Dritter Lernort". This project's aim is to connect the system of vocational education with digital media by a web-based learning platform. TPL supports student's digital learning by means of interactive examples and exercises.…

  6. Acoustic Signature Monitoring and Management of Naval Platforms

    NARCIS (Netherlands)

    Basten, T.G.H.; Jong, C.A.F. de; Graafland, F.; Hof, J. van 't

    2015-01-01

    Acoustic signatures make naval platforms susceptible to detection by threat sensors. The variable operational conditions and lifespan of a platform cause variations in the acoustic signature. To deal with these variations, a real time signature monitoring capability is being developed, with advisory

  7. A semi-physical simulation platform of attitude determination and control system for satellite

    Directory of Open Access Journals (Sweden)

    Yuanjin Yu

    2016-05-01

    Full Text Available A semi-physical simulation platform for attitude determination and control system is proposed to verify the attitude estimator and controller on ground. A simulation target, a host PC, many attitude sensors, and actuators compose the simulation platform. The simulation target is composed of a central processing unit board with VxWorks operating system and many input/output boards connected via Compact Peripheral Component Interconnect bus. The executable programs in target are automatically generated from the simulation models in Simulink based on Real-Time Workshop of MATLAB. A three-axes gyroscope, a three-axes magnetometer, a sun sensor, a star tracer, three flywheels, and a Global Positioning System receiver are connected to the simulation target, which formulates the attitude control cycle of a satellite. The simulation models of the attitude determination and control system are described in detail. Finally, the semi-physical simulation platform is used to demonstrate the availability and rationality of the control scheme of a micro-satellite. Comparing the results between the numerical simulation in Simulink and the semi-physical simulation, the semi-physical simulation platform is available and the control scheme successfully achieves three-axes stabilization.

  8. Memory Efficient VLSI Implementation of Real-Time Motion Detection System Using FPGA Platform

    Directory of Open Access Journals (Sweden)

    Sanjay Singh

    2017-06-01

    Full Text Available Motion detection is the heart of a potentially complex automated video surveillance system, intended to be used as a standalone system. Therefore, in addition to being accurate and robust, a successful motion detection technique must also be economical in the use of computational resources on selected FPGA development platform. This is because many other complex algorithms of an automated video surveillance system also run on the same platform. Keeping this key requirement as main focus, a memory efficient VLSI architecture for real-time motion detection and its implementation on FPGA platform is presented in this paper. This is accomplished by proposing a new memory efficient motion detection scheme and designing its VLSI architecture. The complete real-time motion detection system using the proposed memory efficient architecture along with proper input/output interfaces is implemented on Xilinx ML510 (Virtex-5 FX130T FPGA development platform and is capable of operating at 154.55 MHz clock frequency. Memory requirement of the proposed architecture is reduced by 41% compared to the standard clustering based motion detection architecture. The new memory efficient system robustly and automatically detects motion in real-world scenarios (both for the static backgrounds and the pseudo-stationary backgrounds in real-time for standard PAL (720 × 576 size color video.

  9. A Survey Of Top 10 Open Source Learning Management Systems

    Directory of Open Access Journals (Sweden)

    Mohamed R. Elabnody

    2015-08-01

    Full Text Available Open Source LMSs are fully flexible and customizable so they can be designed in line with your schoolorganizations brand image. Open Source LMSs can also be converted to social learning platforms. You can create an online community through your LMS. This paper describes the most important features in learning management systems LMS that are critical to compare and contrast depend on your system requirements. Also represents a multiple LMS providers that are designed to use in university environment.

  10. Research on the Multi-Energy Management Strategy of the Electric Drive System of a Tracked Bulldozer

    Directory of Open Access Journals (Sweden)

    Ming Pan

    2016-01-01

    Full Text Available The multi-energy management strategy of electric drive system of tracked bulldozer was researched. Firstly, based on power requirement of typical working condition of a tracked bulldozer, the power distribution strategy for three energy sources in the front power chain was proposed by using wavelet theory and fuzzy control theory. Secondly, the electric drive system simulation platform was built in MATLAB/Simulink. At last, a driver-controller based HILS (hardware-in-the-loop simulation platform was built and the multi-energy management strategy was verified. The HILS result shows that front power chain’s power output can meet the back power chain’s requirement, the engine-generator set works near the best fuel consumption curve, and the battery pack’s charge-discharge frequency and current are low. Thus the designed multi-energy management strategy can be used in real-time control of electric drive bulldozer.

  11. Rich internet application system for patient-centric healthcare data management using handheld devices.

    Science.gov (United States)

    Constantinescu, L; Pradana, R; Kim, J; Gong, P; Fulham, Michael; Feng, D

    2009-01-01

    Rich Internet Applications (RIAs) are an emerging software platform that blurs the line between web service and native application, and is a powerful tool for handheld device deployment. By democratizing health data management and widening its availability, this software platform has the potential to revolutionize telemedicine, clinical practice, medical education and information distribution, particularly in rural areas, and to make patient-centric medical computing a reality. In this paper, we propose a telemedicine application that leverages the ability of a mobile RIA platform to transcode, organise and present textual and multimedia data, which are sourced from medical database software. We adopted a web-based approach to communicate, in real-time, with an established hospital information system via a custom RIA. The proposed solution allows communication between handheld devices and a hospital information system for media streaming with support for real-time encryption, on any RIA enabled platform. We demonstrate our prototype's ability to securely and rapidly access, without installation requirements, medical data ranging from simple textual records to multi-slice PET-CT images and maximum intensity (MIP) projections.

  12. Impact of Conventional and Integrated Management Systems on the Water-Soluble Vitamin Content in Potatoes, Field Beans, and Cereals.

    Science.gov (United States)

    Freitag, Sabine; Verrall, Susan R; Pont, Simon D A; McRae, Diane; Sungurtas, Julia A; Palau, Raphaëlle; Hawes, Cathy; Alexander, Colin J; Allwood, J William; Foito, Alexandre; Stewart, Derek; Shepherd, Louise V T

    2018-01-31

    The reduction of the environmental footprint of crop production without compromising crop yield and their nutritional value is a key goal for improving the sustainability of agriculture. In 2009, the Balruddery Farm Platform was established at The James Hutton Institute as a long-term experimental platform for cross-disciplinary research of crops using two agricultural ecosystems. Crops representative of UK agriculture were grown under conventional and integrated management systems and analyzed for their water-soluble vitamin content. Integrated management, when compared with the conventional system, had only minor effects on water-soluble vitamin content, where significantly higher differences were seen for the conventional management practice on the levels of thiamine in field beans (p water-soluble vitamin content of the crops analyzed here.

  13. [Establishment and Management of Multicentral Collection Bio-sample Banks of Malignant Tumors from Digestive System].

    Science.gov (United States)

    Shen, Si; Shen, Junwei; Zhu, Liang; Wu, Chaoqun; Li, Dongliang; Yu, Hongyu; Qiu, Yuanyuan; Zhou, Yi

    2015-11-01

    To establish and manage of multicentral collection bio-sample banks of malignant tumors from digestive system, the paper designed a multicentral management system, established the standard operation procedures (SOPs) and leaded ten hospitals nationwide to collect tumor samples. The biobank has been established for half a year, and has collected 695 samples from patients with digestive system malignant tumor. The clinical data is full and complete, labeled in a unified way and classified to be managed. The clinical and molecular biology researches were based on the biobank, and obtained achievements. The biobank provides a research platform for malignant tumor of digestive system from different regions and of different types.

  14. DCMS: A data analytics and management system for molecular simulation.

    Science.gov (United States)

    Kumar, Anand; Grupcev, Vladimir; Berrada, Meryem; Fogarty, Joseph C; Tu, Yi-Cheng; Zhu, Xingquan; Pandit, Sagar A; Xia, Yuni

    Molecular Simulation (MS) is a powerful tool for studying physical/chemical features of large systems and has seen applications in many scientific and engineering domains. During the simulation process, the experiments generate a very large number of atoms and intend to observe their spatial and temporal relationships for scientific analysis. The sheer data volumes and their intensive interactions impose significant challenges for data accessing, managing, and analysis. To date, existing MS software systems fall short on storage and handling of MS data, mainly because of the missing of a platform to support applications that involve intensive data access and analytical process. In this paper, we present the database-centric molecular simulation (DCMS) system our team developed in the past few years. The main idea behind DCMS is to store MS data in a relational database management system (DBMS) to take advantage of the declarative query interface ( i.e. , SQL), data access methods, query processing, and optimization mechanisms of modern DBMSs. A unique challenge is to handle the analytical queries that are often compute-intensive. For that, we developed novel indexing and query processing strategies (including algorithms running on modern co-processors) as integrated components of the DBMS. As a result, researchers can upload and analyze their data using efficient functions implemented inside the DBMS. Index structures are generated to store analysis results that may be interesting to other users, so that the results are readily available without duplicating the analysis. We have developed a prototype of DCMS based on the PostgreSQL system and experiments using real MS data and workload show that DCMS significantly outperforms existing MS software systems. We also used it as a platform to test other data management issues such as security and compression.

  15. Platform Constellations

    DEFF Research Database (Denmark)

    Staykova, Kalina Stefanova; Damsgaard, Jan

    2016-01-01

    This research paper presents an initial attempt to introduce and explain the emergence of new phenomenon, which we refer to as platform constellations. Functioning as highly modular systems, the platform constellations are collections of highly connected platforms which co-exist in parallel and a......’ acquisition and users’ engagement rates as well as unlock new sources of value creation and diversify revenue streams....

  16. A farm platform approach to optimizing temperate grazing-livestock systems: metrics for trade-off assessments and future innovations

    Science.gov (United States)

    Harris, Paul; Takahashi, Taro; Blackwell, Martin; Cardenas, Laura; Collins, Adrian; Dungait, Jennifer; Eisler, Mark; Hawkins, Jane; Misselbrook, Tom; Mcauliffe, Graham; Mcfadzean, Jamie; Murray, Phil; Orr, Robert; Jordana Rivero, M.; Wu, Lianhai; Lee, Michael

    2017-04-01

    Global agriculture is at a critical juncture when competing requirements for maximal production and minimal pollution have led to the concept of sustainable intensification. Livestock production, especially ruminant livestock is central to this debate. Ruminants make an important contribution to global food security by converting feed that is unsuitable for human consumption to high value protein, demand for which is currently increasing at an unprecedented rate. Sustainable intensification of ruminant livestock production may be applied to pastoral grazing, mixed-cropping, feedlot and housed production systems. All these systems have associated environmental risks such as water and air pollution, greenhouse gas emissions and soil degradation, as well as issues affecting production efficiency, product quality and consumer acceptability, such as reduced animal fertility, health and welfare, reflected in the development of agricultural sustainability policies. Further, in many societies livestock represent a resource far greater than just food, e.g. fibre, draught, fertiliser, fuel, bank and social. These challenges necessitate multidisciplinary solutions that can only be properly researched, implemented and tested in real-world production systems which are suited to their geographical and climatic production practice, e.g. temperate grassland. The North Wyke Farm Platform (http://www.rothamsted.ac.uk/farmplatform) was established during 2010 as a UK national capability for collaborative research, training and knowledge exchange in agro-environmental sciences. Its remit is to research agricultural productivity and ecosystem responses to different management practices for beef and sheep production in lowland temperate grasslands. Following construction, a typical beef and sheep system based on permanent pasture receiving chemical fertilisers on first grade pasture (>60% perennial ryegrass) was implemented across the 67.2 ha farm platform in order to obtain baseline

  17. The International Platform on Earthquake Early Warning Systems (IP-EEWS)

    Science.gov (United States)

    Torres, Jair; Fanchiotti, Margherita

    2017-04-01

    The Sendai Framework for Disaster Risk Reduction 2015-2030 recognizes the need to "substantially increase the availability of and access to multi-hazard early warning systems and disaster risk information and assessments to the people by 2030" as one of its global targets (target "g"). While considerable progress has been made in recent decades, early warning systems (EWSs) continue to be less developed for geo-hazards and significant challenges remain in advancing the development of EWSs for specific hazards, particularly for fastest onset hazards such as earthquakes. An earthquake early warning system (EEWS) helps in disseminating timely information about potentially catastrophic earthquake hazards to the public, emergency managers and the private sector to provide enough time to implement automatized emergency measures. At the same time, these systems help to reduce considerably the CO2 emissions produced by the catastrophic impacts and subsequent effects of earthquakes, such as those generated by fires, collapses, and pollution (among others), as well as those produced in the recovery and reconstruction processes. In recent years, EEWSs have been developed independently in few countries: EEWSs have shown operational in Japan and Mexico, while other regions in California (USA), Turkey, Italy, Canada, South Korea and China (including Taiwan) are in the development stages or under restricted applications. Many other countries in the Indian Subcontinent, Southeast Asia, Central Asia, Middle East, Eastern Africa, Southeast Africa, as well as Central America, South America and the Caribbean, are located in some of the most seismically active regions in the world, or present moderate seismicity but high vulnerability, and would strongly benefit from the development of EEWSs. Given that, in many instances, the development of an EEWS still requires further testing, increased density coverage in seismic observation stations, regional coordination, and further scientific

  18. A Vehicle Management End-to-End Testing and Analysis Platform for Validation of Mission and Fault Management Algorithms to Reduce Risk for NASAs Space Launch System

    Science.gov (United States)

    Trevino, Luis; Johnson, Stephen B.; Patterson, Jonathan; Teare, David

    2015-01-01

    ) early in the development lifecycle for the SLS program, NASA formed the M&FM team as part of the Integrated Systems Health Management and Automation Branch under the Spacecraft Vehicle Systems Department at the Marshall Space Flight Center (MSFC). To support the development of the FM algorithms, the VMET developed by the M&FM team provides the ability to integrate the algorithms, perform test cases, and integrate vendor-supplied physics-based launch vehicle (LV) subsystem models. Additionally, the team has developed processes for implementing and validating the M&FM algorithms for concept validation and risk reduction. The flexibility of the VMET capabilities enables thorough testing of the M&FM algorithms by providing configurable suites of both nominal and off-nominal test cases to validate the developed algorithms utilizing actual subsystem models such as MPS, GNC, and others. One of the principal functions of VMET is to validate the M&FM algorithms and substantiate them with performance baselines for each of the target vehicle subsystems in an independent platform exterior to the flight software test and validation processes. In any software development process there is inherent risk in the interpretation and implementation of concepts from requirements and test cases into flight software compounded with potential human errors throughout the development and regression testing lifecycle. Risk reduction is addressed by the M&FM group but in particular by the Analysis Team working with other organizations such as S&MA, Structures and Environments, GNC, Orion, Crew Office, Flight Operations, and Ground Operations by assessing performance of the M&FM algorithms in terms of their ability to reduce Loss of Mission (LOM) and Loss of Crew (LOC) probabilities. In addition, through state machine and diagnostic modeling, analysis efforts investigate a broader suite of failure effects and associated detection and responses to be tested in VMET to ensure reliable failure

  19. Intelligent Management System of Power Network Information Collection Under Big Data Storage

    Directory of Open Access Journals (Sweden)

    Qin Yingying

    2017-01-01

    Full Text Available With the development of economy and society, big data storage in enterprise management has become a problem that can’t be ignored. How to manage and optimize the allocation of tasks better is an important factor in the sustainable development of an enterprise. Now the enterprise information intelligent management has become a hot spot of management mode and concept in the information age. It presents information to the business managers in a more efficient, lower cost, and global form. The system uses the SG-UAP development tools, which is based on Eclipse development environment, and suits for Windows operating system, with Oracle as database development platform, Tomcat network information service for application server. The system uses SOA service-oriented architecture, provides RESTful style service, and HTTP(S as the communication protocol, and JSON as the data format. The system is divided into two parts, the front-end and the backs-end, achieved functions like user login, registration, password retrieving, enterprise internal personnel information management and internal data display and other functions.

  20. The computer aided education and training system for accident management

    International Nuclear Information System (INIS)

    Yoneyama, Mitsuru; Masuda, Takahiro; Kubota, Ryuji; Fujiwara, Tadashi; Sakuma, Hitoshi

    2000-01-01

    Under severe accident conditions of a nuclear power plant, plant operators and technical support center (TSC) staffs will be under a amount of stress. Therefore, those individuals responsible for managing the plant should promote their understanding about the accident management and operations. Moreover, it is also important to train in ordinary times, so that they can carry out accident management operations effectively on severe accidents. Therefore, the education and training system which works on personal computers was developed by Japanese BWR group (Tokyo Electric Power Co.,Inc., Tohoku Electric Power Co. ,Inc., Chubu Electric Power Co. ,Inc., Hokuriku Electric Power Co.,Inc., Chugoku Electric Power Co.,Inc., Japan Atomic Power Co.,Inc.), and Hitachi, Ltd. The education and training system is composed of two systems. One is computer aided instruction (CAI) education system and the other is education and training system with a computer simulation. Both systems are designed to execute on MS-Windows(R) platform of personal computers. These systems provide plant operators and technical support center staffs with an effective education and training tool for accident management. TEPCO used the simulation system for the emergency exercise assuming the occurrence of hypothetical severe accident, and have performed an effective exercise in March, 2000. (author)

  1. The new logistic and waste management concept for Mittelplate drilling platform; Das neue Logistik- und Entsorgungskonzept der Bohr- und Foerderinsel Mittelplate

    Energy Technology Data Exchange (ETDEWEB)

    Kowalczyk, D. [RWE Dea AG, Hamburg (Germany); Wachtendorf, A. [M-I SWACO Deutschland GmbH, Celle (Germany)

    2007-09-13

    The installation of a new drilling system on Mittelplate platform (owned by RWE Dea AG as managing company and Wintershall AG in 50 percent shares) in late 2005 made it possible to implement a continuous drilling programme in deeper strata. A new logistic and waste management concept was developed and implemented in order to meet the new logistic requirements of this offshore installation in the national park ''Schleswig-Holsteinisches Wattenmeer'' while optimizing the successful Mittelplate HSE safety package. In the conception phase, commercial technologies in the fields of drilling cutting, transport, marine logistics, flushing and waste management were collected world-wide and were analyzed with a view to their applicability in this ecologically sensitive region. The optimum technical solution, which is also economically efficient, in accordance with the safety and environmental protection philosophy of the consortium, and also optimizes the supply and waste management process relating to drilling, comprises three interacting elements, i.e. a cutting transport system, a cutting logistic centre, and a flushing tank store. (orig.)

  2. Workstation computer systems for in-core fuel management

    International Nuclear Information System (INIS)

    Ciccone, L.; Casadei, A.L.

    1992-01-01

    The advancement of powerful engineering workstations has made it possible to have thermal-hydraulics and accident analysis computer programs operating efficiently with a significant performance/cost ratio compared to large mainframe computer. Today, nuclear utilities are acquiring independent engineering analysis capability for fuel management and safety analyses. Computer systems currently available to utility organizations vary widely thus requiring that this software be operational on a number of computer platforms. Recognizing these trends Westinghouse adopted a software development life cycle process for the software development activities which strictly controls the development, testing and qualification of design computer codes. In addition, software standards to ensure maximum portability were developed and implemented, including adherence to FORTRAN 77, and use of uniform system interface and auxiliary routines. A comprehensive test matrix was developed for each computer program to ensure that evolution of code versions preserves the licensing basis. In addition, the results of such test matrices establish the Quality Assurance basis and consistency for the same software operating on different computer platforms. (author). 4 figs

  3. An open-source automated continuous condition-based maintenance platform for commercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Katipamula, Srinivas; Gowri, Krishnan; Hernandez, George

    2016-09-09

    This paper describes one such reference process that can be deployed to provide continuous automated conditioned-based maintenance management for buildings that have BIM, a building automation system (BAS) and a computerized maintenance management software (CMMS) systems. The process can be deployed using an open source transactional network platform, VOLTTRON™, designed for distributed sensing and controls and supports both energy efficiency and grid services.

  4. Ocean Data Interoperability Platform (ODIP): developing a common framework for marine data management on a global scale

    Science.gov (United States)

    Schaap, Dick M. A.; Glaves, Helen

    2016-04-01

    Europe, the USA, and Australia are making significant progress in facilitating the discovery, access and long term stewardship of ocean and marine data through the development, implementation, population and operation of national, regional or international distributed ocean and marine observing and data management infrastructures such as SeaDataNet, EMODnet, IOOS, R2R, and IMOS. All of these developments are resulting in the development of standards and services implemented and used by their regional communities. The Ocean Data Interoperability Platform (ODIP) project is supported by the EU FP7 Research Infrastructures programme, National Science Foundation (USA) and Australian government and has been initiated 1st October 2012. Recently the project has been continued as ODIP II for another 3 years with EU HORIZON 2020 funding. ODIP includes all the major organisations engaged in ocean data management in EU, US, and Australia. ODIP is also supported by the IOC-IODE, closely linking this activity with its Ocean Data Portal (ODP) and Ocean Data Standards Best Practices (ODSBP) projects. The ODIP platform aims to ease interoperability between the regional marine data management infrastructures. Therefore it facilitates an organised dialogue between the key infrastructure representatives by means of publishing best practice, organising a series of international workshops and fostering the development of common standards and interoperability solutions. These are evaluated and tested by means of prototype projects. The presentation will give further background on the ODIP projects and the latest information on the progress of three prototype projects addressing: 1. establishing interoperability between the regional EU, USA and Australia data discovery and access services (SeaDataNet CDI, US NODC, and IMOS MCP) and contributing to the global GEOSS and IODE-ODP portals; 2. establishing interoperability between cruise summary reporting systems in Europe, the USA and

  5. PLAN: a web platform for automating high-throughput BLAST searches and for managing and mining results.

    Science.gov (United States)

    He, Ji; Dai, Xinbin; Zhao, Xuechun

    2007-02-09

    BLAST searches are widely used for sequence alignment. The search results are commonly adopted for various functional and comparative genomics tasks such as annotating unknown sequences, investigating gene models and comparing two sequence sets. Advances in sequencing technologies pose challenges for high-throughput analysis of large-scale sequence data. A number of programs and hardware solutions exist for efficient BLAST searching, but there is a lack of generic software solutions for mining and personalized management of the results. Systematically reviewing the results and identifying information of interest remains tedious and time-consuming. Personal BLAST Navigator (PLAN) is a versatile web platform that helps users to carry out various personalized pre- and post-BLAST tasks, including: (1) query and target sequence database management, (2) automated high-throughput BLAST searching, (3) indexing and searching of results, (4) filtering results online, (5) managing results of personal interest in favorite categories, (6) automated sequence annotation (such as NCBI NR and ontology-based annotation). PLAN integrates, by default, the Decypher hardware-based BLAST solution provided by Active Motif Inc. with a greatly improved efficiency over conventional BLAST software. BLAST results are visualized by spreadsheets and graphs and are full-text searchable. BLAST results and sequence annotations can be exported, in part or in full, in various formats including Microsoft Excel and FASTA. Sequences and BLAST results are organized in projects, the data publication levels of which are controlled by the registered project owners. In addition, all analytical functions are provided to public users without registration. PLAN has proved a valuable addition to the community for automated high-throughput BLAST searches, and, more importantly, for knowledge discovery, management and sharing based on sequence alignment results. The PLAN web interface is platform

  6. PLAN: a web platform for automating high-throughput BLAST searches and for managing and mining results

    Directory of Open Access Journals (Sweden)

    Zhao Xuechun

    2007-02-01

    Full Text Available Abstract Background BLAST searches are widely used for sequence alignment. The search results are commonly adopted for various functional and comparative genomics tasks such as annotating unknown sequences, investigating gene models and comparing two sequence sets. Advances in sequencing technologies pose challenges for high-throughput analysis of large-scale sequence data. A number of programs and hardware solutions exist for efficient BLAST searching, but there is a lack of generic software solutions for mining and personalized management of the results. Systematically reviewing the results and identifying information of interest remains tedious and time-consuming. Results Personal BLAST Navigator (PLAN is a versatile web platform that helps users to carry out various personalized pre- and post-BLAST tasks, including: (1 query and target sequence database management, (2 automated high-throughput BLAST searching, (3 indexing and searching of results, (4 filtering results online, (5 managing results of personal interest in favorite categories, (6 automated sequence annotation (such as NCBI NR and ontology-based annotation. PLAN integrates, by default, the Decypher hardware-based BLAST solution provided by Active Motif Inc. with a greatly improved efficiency over conventional BLAST software. BLAST results are visualized by spreadsheets and graphs and are full-text searchable. BLAST results and sequence annotations can be exported, in part or in full, in various formats including Microsoft Excel and FASTA. Sequences and BLAST results are organized in projects, the data publication levels of which are controlled by the registered project owners. In addition, all analytical functions are provided to public users without registration. Conclusion PLAN has proved a valuable addition to the community for automated high-throughput BLAST searches, and, more importantly, for knowledge discovery, management and sharing based on sequence alignment results

  7. Providing Memory Management Abstraction for Self-Reconfigurable Video Processing Platforms

    Directory of Open Access Journals (Sweden)

    Kurt Franz Ackermann

    2009-01-01

    Full Text Available This paper presents a concept for an SDRAM controller targeting video processing platforms with dynamically reconfigurable processing units (RPUs. A priority-arbitration algorithm provides the required QoS and supports high bit-rate data streaming of multiple clients. Conforming to common video data structures the controller organizes the memory in partitions, frames, lines, and pixels. The raised level of abstraction drastically reduces the complexity of clients' addressing logic. Its uniform interface structure facilitates instantiations in systems with various clients. In addition to SDRAM controllers for regular applications, special demands of reconfigurable platforms have to be satisfied. The aim of this work is to minimize the number of required bus macros leading to relaxed place and route constraints and reducing the number of critical design paths. A suitable interface protocol is presented, and fundamental implementation issues are outlined.

  8. Advances in product family and product platform design methods & applications

    CERN Document Server

    Jiao, Jianxin; Siddique, Zahed; Hölttä-Otto, Katja

    2014-01-01

    Advances in Product Family and Product Platform Design: Methods & Applications highlights recent advances that have been made to support product family and product platform design and successful applications in industry. This book provides not only motivation for product family and product platform design—the “why” and “when” of platforming—but also methods and tools to support the design and development of families of products based on shared platforms—the “what”, “how”, and “where” of platforming. It begins with an overview of recent product family design research to introduce readers to the breadth of the topic and progresses to more detailed topics and design theory to help designers, engineers, and project managers plan, architect, and implement platform-based product development strategies in their companies. This book also: Presents state-of-the-art methods and tools for product family and product platform design Adopts an integrated, systems view on product family and pro...

  9. Evolvable Smartphone-Based Platforms for Point-Of-Care In-Vitro Diagnostics Applications

    DEFF Research Database (Denmark)

    Patou, François; Al Atraktchi, Fatima Al-Zahraa; Kjærgaard, Claus

    2016-01-01

    recently that system evolvability, defined as the design characteristic that facilitates more manageable transitions between system generations via the modification of an inherited design, can help remedy these limitations. In this paper, we discuss how platform-based design can constitute a formal entry...

  10. Seismic Response of a Platform-Frame System with Steel Columns

    Directory of Open Access Journals (Sweden)

    Davide Trutalli

    2017-04-01

    Full Text Available Timber platform-frame shear walls are characterized by high ductility and diffuse energy dissipation but limited in-plane shear resistance. A novel lightweight constructive system composed of steel columns braced with oriented strand board (OSB panels was conceived and tested. Preliminary laboratory tests were performed to study the OSB-to-column connections with self-drilling screws. Then, the seismic response of a shear wall was determined performing a quasi-static cyclic-loading test of a full-scale specimen. Results presented in this work in terms of force-displacement capacity show that this system confers to shear walls high in-plane strength and stiffness with good ductility and dissipative capacity. Therefore, the incorporation of steel columns within OSB bracing panels results in a strong and stiff platform-frame system with high potential for low- and medium-rise buildings in seismic-prone areas.

  11. A Test Platform for Planned Field Operations Using LEGO Mindstorms NXT

    Directory of Open Access Journals (Sweden)

    Gareth Edwards

    2013-11-01

    Full Text Available Testing agricultural operations and management practices associated with different machinery, systems and planning approaches can be both costly and time-consuming. Computer simulations of such systems are used for development and testing; however, to gain the experience of real-world performance, an intermediate step between simulation and full-scale testing should be included. In this paper, a potential common framework using the LEGO Mindstorms NXT micro-tractor platform is described in terms of its hardware and software components. The performance of the platform is demonstrated and tested in terms of its capability of supporting decision making on infield operation planning. The proposed system represents the basic measures for developing a complete test platform for field operations, where route plans, mission plans, multiple-machinery cooperation strategies and machinery coordination can be executed and tested in the laboratory.

  12. Evaluating a learning management system for blended learning in Greek higher education.

    Science.gov (United States)

    Kabassi, Katerina; Dragonas, Ioannis; Ntouzevits, Alexandra; Pomonis, Tzanetos; Papastathopoulos, Giorgos; Vozaitis, Yiannis

    2016-01-01

    This paper focuses on the usage of a learning management system in an educational institution for higher education in Greece. More specifically, the paper examines the literature on the use of different learning management systems for blended learning in higher education in Greek Universities and Technological Educational Institutions and reviews the advantages and disadvantages. Moreover, the paper describes the usage of the Open eClass platform in a Technological Educational Institution, TEI of Ionian Islands, and the effort to improve the educational material by organizing it and adding video-lectures. The platform has been evaluated by the students of the TEI of Ionian Islands based on six dimensions: namely student, teacher, course, technology, system design, and environmental dimension. The results of this evaluation revealed that Open eClass has been successfully used for blended learning in the TEI of Ionian Islands. Despite the instructors' initial worries about students' lack of participation in their courses if their educational material was made available online and especially in video lectures; blended learning did not reduce physical presence of the students in the classroom. Instead it was only used as a supplementary tool that helps students to study further, watch missed lectures, etc.

  13. A novel collaborative e-learning platform for medical students - ALERT STUDENT.

    Science.gov (United States)

    Taveira-Gomes, Tiago; Saffarzadeh, Areo; Severo, Milton; Guimarães, M Jorge; Ferreira, Maria Amélia

    2014-07-14

    The increasing complexity of medical curricula would benefit from adaptive computer supported collaborative learning systems that support study management using instructional design and learning object principles. However, to our knowledge, there are scarce reports regarding applications developed to meet this goal and encompass the complete medical curriculum. The aim of ths study was to develop and assess the usability of an adaptive computer supported collaborative learning system for medical students to manage study sessions. A study platform named ALERT STUDENT was built as a free web application. Content chunks are represented as Flashcards that hold knowledge and open ended questions. These can be created in a collaborative fashion. Multiple Flashcards can be combined into custom stacks called Notebooks that can be accessed in study Groups that belong to the user institution. The system provides a Study Mode that features text markers, text notes, timers and color-coded content prioritization based on self-assessment of open ended questions presented in a Quiz Mode. Time spent studying and Perception of knowledge are displayed for each student and peers using charts. Computer supported collaborative learning is achieved by allowing for simultaneous creation of Notebooks and self-assessment questions by many users in a pre-defined Group. Past personal performance data is retrieved when studying new Notebooks containing previously studied Flashcards. Self-report surveys showed that students highly agreed that the system was useful and were willing to use it as a reference tool. The platform employs various instructional design and learning object principles in a computer supported collaborative learning platform for medical students that allows for study management. The application broadens student insight over learning results and supports informed decisions based on past learning performance. It serves as a potential educational model for the medical

  14. An Integrated Web-based Decision Support System in Disaster Risk Management

    Science.gov (United States)

    Aye, Z. C.; Jaboyedoff, M.; Derron, M. H.

    2012-04-01

    Nowadays, web based decision support systems (DSS) play an essential role in disaster risk management because of their supporting abilities which help the decision makers to improve their performances and make better decisions without needing to solve complex problems while reducing human resources and time. Since the decision making process is one of the main factors which highly influence the damages and losses of society, it is extremely important to make right decisions at right time by combining available risk information with advanced web technology of Geographic Information System (GIS) and Decision Support System (DSS). This paper presents an integrated web-based decision support system (DSS) of how to use risk information in risk management efficiently and effectively while highlighting the importance of a decision support system in the field of risk reduction. Beyond the conventional systems, it provides the users to define their own strategies starting from risk identification to the risk reduction, which leads to an integrated approach in risk management. In addition, it also considers the complexity of changing environment from different perspectives and sectors with diverse stakeholders' involvement in the development process. The aim of this platform is to contribute a part towards the natural hazards and geosciences society by developing an open-source web platform where the users can analyze risk profiles and make decisions by performing cost benefit analysis, Environmental Impact Assessment (EIA) and Strategic Environmental Assessment (SEA) with the support of others tools and resources provided. There are different access rights to the system depending on the user profiles and their responsibilities. The system is still under development and the current version provides maps viewing, basic GIS functionality, assessment of important infrastructures (e.g. bridge, hospital, etc.) affected by landslides and visualization of the impact

  15. A DESIGN OF SOCIAL MEDIA ANALYSIS SYSTEM BASED ON MOBILE PLATFORMS

    OpenAIRE

    Alaybeyoglu, Aysegul; Yavuz, Levent

    2017-01-01

    Alongwith the developing technology, social media technologies have becomewidespread and the number of internet users has increased rapidly. In addition,social media platforms have become very popular and the number of active socialmedia users has increased considerably. As a result of the increased use ofsocial media, there has been a trend towards mobile platforms. In this paper, adesign of a social media analysis system is developed using mobile platformsbased on Android. By this way, impo...

  16. Platform computing

    CERN Multimedia

    2002-01-01

    "Platform Computing releases first grid-enabled workload management solution for IBM eServer Intel and UNIX high performance computing clusters. This Out-of-the-box solution maximizes the performance and capability of applications on IBM HPC clusters" (1/2 page) .

  17. A unique aerial platform equipped for large area surveillance: a real-time tool for emergency management

    International Nuclear Information System (INIS)

    Frullani, Salvatore; Castelluccio, Donato M.; Cisbani, Evaristo; Colilli, Stefano; Fratoni, Rolando; Giuliani, Fausto; Mostarda, Angelo; Colangeli, Giorgio; De Otto, Gian L.; Marchiori, Carlo; Paoloni, Gianfranco

    2008-01-01

    Aerial platform equipped with a sampling line and real-time monitoring of sampled aerosol is presented. The system is composed by: a) A Sky Arrow 650 fixed wing aircraft with the front part of the fuselage properly adapted to house the detection and acquisition equipment; b) A compact air sampling line where the iso kinetic sampling is dynamically maintained, aerosol is collected on a filter positioned along the line and hosted on a rotating 4-filters disk; c) A detection subsystem: a small BGO scintillator and Geiger counter right behind the sampling filter, a HPGe detector allows radionuclide identification in the collected aerosol samples, a large NaI(Tl) crystal detects airborne and ground gamma radiation; d) Several environmental (temperature, pressure, aircraft/wind speed) sensors and a GPS receiver that support the full characterization of the sampling conditions and the temporal and geographical location of the acquired data; e) Acquisition and control system based on compact electronics and real time software that operate the sampling line actuators, guarantee the dynamical iso kinetic condition, and acquire the detectors and sensor data. With this system quantitative measurements can be available also during the plume phase of an accident, while other aerial platforms, without sampling capability, can only be used for qualitative assessments. Transmission of all data will be soon implemented in order to make all the data available in real-time to the Technical Centre for the Emergency Management. The use of an unmanned air-vehicle (UAV) is discussed as future option. (author)

  18. Exergetic assessment of energy systems on North Sea oil and gas platforms

    International Nuclear Information System (INIS)

    Nguyen, Tuong-Van; Pierobon, Leonardo; Elmegaard, Brian; Haglind, Fredrik; Breuhaus, Peter; Voldsund, Mari

    2013-01-01

    Oil and gas platforms in the North Sea region are associated with high power consumption and large CO 2 -emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus ® , Dynamic Network Analysis and Aspen HYSYS ® . 62–65% of the total exergy destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35–38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high-temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. - Highlights: • North Sea oil and gas platforms are investigated and a generic model is developed. • Exergy analysis of these offshore facilities is performed. • Most of the total exergy destruction is attributable to the utility systems producing the electrical power required onsite. • Rejection of the exhaust gases from the utility systems is the major exergy loss of this system. • The highest thermodynamic performance is reached with low well-fluid content of water and gas

  19. Exergetic assessment of energy systems on North Sea oil and gas platforms

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Tuong-Van [Section of Thermal Energy, Department of Mechanical Engineering, Technical University of Denmark, Building 403, Nils Koppels Allé, 2800 Kongens Lyngby (Denmark); Pierobon, Leonardo; Elmegaard, Brian; Haglind, Fredrik [Section of Thermal Energy, Department of Mechanical Engineering, Technical University of Denmark, Building 403, Nils Koppels Allé, 2800 Kongens Lyngby (Denmark); Breuhaus, Peter [Department of Energy, International Research Institute of Stavanger, Professor Olav Hanssens vei 15, 4021 Stavanger (Norway); Voldsund, Mari [Department of Chemistry, Norwegian University of Science and Technology, Høgskoleringen 5, 7491 Trondheim (Norway)

    2013-12-01

    Oil and gas platforms in the North Sea region are associated with high power consumption and large CO{sub 2}-emissions, as the processing and utility plants suffer from significant changes in production rates and performance losses over the field lifespan. In this paper, a generic model of the overall offshore system is described: its thermodynamic performance is assessed by performing an exergy accounting and rules of thumb for oil and gas platforms are derived. Simulations are built and conducted with the tools Aspen Plus{sup ®}, Dynamic Network Analysis and Aspen HYSYS{sup ®}. 62–65% of the total exergy destruction of an offshore platform is attributable to the power generation and waste heat recovery system, and 35–38% to the oil and gas processing. The variability of the feed composition has little effect on the split of the thermodynamic irreversibilities between both plants. The rejection of high-temperature gases from the utility and flaring systems is the major contributor to the exergy losses. These findings suggest to focus efforts on a better use of the waste heat contained in the exhaust gases and on the ways in which the gas compression performance can be improved. - Highlights: • North Sea oil and gas platforms are investigated and a generic model is developed. • Exergy analysis of these offshore facilities is performed. • Most of the total exergy destruction is attributable to the utility systems producing the electrical power required onsite. • Rejection of the exhaust gases from the utility systems is the major exergy loss of this system. • The highest thermodynamic performance is reached with low well-fluid content of water and gas.

  20. Formal synthesis of application and platform behaviors of embedded software systems

    DEFF Research Database (Denmark)

    Kim, Jin Hyun; Kang, Inhye; Choi, Jin-Young

    2015-01-01

    Two main embedded software components, application software and platform software, i.e., the real-time operating system (RTOS), interact with each other in order to achieve the functionality of the system. However, they are so different in behaviors that one behavior modeling language is not suff......Two main embedded software components, application software and platform software, i.e., the real-time operating system (RTOS), interact with each other in order to achieve the functionality of the system. However, they are so different in behaviors that one behavior modeling language...... is not sufficient to model both styles of behaviors and to reason about the characteristics of their individual behaviors as well as their parallel behavior and interaction properties. In this paper, we present a formal approach to the synthesis of the application software and the RTOS behavior models...

  1. Numerical Investigation of a Tuned Heave Plate Energy-Harvesting System of a Semi-Submersible Platform

    Directory of Open Access Journals (Sweden)

    Kun Liu

    2016-01-01

    Full Text Available A novel tuned heave plate energy-harvesting system (THPEH is presented for the motion suppressing and energy harvesting of a semi-submersible platform. This THPEH system is designed based on the principle of a tuned mass damper (TMD and is composed of spring supports, a power take-off system (PTO and four movable heave plates. The permanent magnet linear generators (PMLG are used as the PTO system in this design. A semi-submersible platform operating in the South China Sea is selected as the research subject for investigating the effects of the THPEH system on motion reduction and harvesting energy through numerical simulations. The numerical model of the platform and the THPEH system, which was established based on hydrodynamic analysis, is modified and validated by the results of the flume test of a 1:70 scale model. The effects of the parameters, including the size, the frequency ratio and the damping ratio of the THPEH system, are systematically investigated. The results show that this THPEH system, with proper parameters, could significantly reduce the motions of the semi-submersible platform and generate considerable power under different wave conditions.

  2. New framework of NGN web-based management system

    Science.gov (United States)

    Nian, Zhou; Jie, Yin; Qian, Mao

    2007-11-01

    This paper introduces the basic conceptions and key technology of the Ajax and some popular frameworks in the J2EE architecture, try to integrate all the frameworks into a new framework. The developers can develop web applications much more convenient by using this framework and the web application can provide a more friendly and interactive platform to the end users. At last an example is given to explain how to use the new framework to build a web-based management system of the softswitch network.

  3. CONTENT MANAGEMENT SYSTEM FOR E-COMMERCE WEBSITE DEVELOPMENT

    OpenAIRE

    Neeraj Rohilla

    2017-01-01

    In today’s world one of the most growing areas is online selling and purchasing of goods and services which we generally call as E-commerce business. With this massive growth of global ecommerce market, the number of available Content Management Systems (CMS) and ecommerce platforms has grown as well. The aim of this research paper is to make a comparative study between many widely used open sources CMSs used for e-commerce website. This comparison will guide which CMS can be selected for set...

  4. A Methodology and a Web Platform for the Collaborative Development of Context-Aware Systems

    Science.gov (United States)

    Martín, David; López-de-Ipiña, Diego; Alzua-Sorzabal, Aurkene; Lamsfus, Carlos; Torres-Manzanera, Emilio

    2013-01-01

    Information and services personalization is essential for an optimal user experience. Systems have to be able to acquire data about the user's context, process them in order to identify the user's situation and finally, adapt the functionality of the system to that situation, but the development of context-aware systems is complex. Data coming from distributed and heterogeneous sources have to be acquired, processed and managed. Several programming frameworks have been proposed in order to simplify the development of context-aware systems. These frameworks offer high-level application programming interfaces for programmers that complicate the involvement of domain experts in the development life-cycle. The participation of users that do not have programming skills but are experts in the application domain can speed up and improve the development process of these kinds of systems. Apart from that, there is a lack of methodologies to guide the development process. This article presents as main contributions, the implementation and evaluation of a web platform and a methodology to collaboratively develop context-aware systems by programmers and domain experts. PMID:23666131

  5. MathWorks Simulink and C++ integration with the new VLT PLC-based standard development platform for instrument control systems

    Science.gov (United States)

    Kiekebusch, Mario J.; Di Lieto, Nicola; Sandrock, Stefan; Popovic, Dan; Chiozzi, Gianluca

    2014-07-01

    ESO is in the process of implementing a new development platform, based on PLCs, for upcoming VLT control systems (new instruments and refurbishing of existing systems to manage obsolescence issues). In this context, we have evaluated the integration and reuse of existing C++ libraries and Simulink models into the real-time environment of BECKHOFF Embedded PCs using the capabilities of the latest version of TwinCAT software and MathWorks Embedded Coder. While doing so the aim was to minimize the impact of the new platform by adopting fully tested solutions implemented in C++. This allows us to reuse the in house expertise, as well as extending the normal capabilities of the traditional PLC programming environments. We present the progress of this work and its application in two concrete cases: 1) field rotation compensation for instrument tracking devices like derotators, 2) the ESO standard axis controller (ESTAC), a generic model-based controller implemented in Simulink and used for the control of telescope main axes.

  6. Augmentation of Quasi-Zenith Satellite Positioning System Using High Altitude Platforms Systems (HAPS)

    Science.gov (United States)

    Tsujii, Toshiaki; Harigae, Masatoshi

    Recently, some feasibility studies on a regional positioning system using the quasi-zenith satellites and the geostationary satellites have been conducted in Japan. However, the geometry of this system seems to be unsatisfactory in terms of the positioning accuracy in north-south direction. In this paper, an augmented satellite positioning system by the High Altitude Platform Systems (HAPS) is proposed since the flexibility of the HAPS location is effective to improve the geometry of satellite positioning system. The improved positioning performance of the augmented system is also demonstrated.

  7. Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines

    DEFF Research Database (Denmark)

    Kallesøe, Bjarne Skovmose

    This report present results from the PSO project 2008-1-10092 entitled Aero-Hydro-Elastic Simulation Platform for Wave Energy Systems and floating Wind Turbines that deals with measurements, modelling and simulations of the world’s first combined wave and wind energy platform. The floating energy...

  8. An Operational Web-Based Indicator System for Integrated Coastal Zone Management

    Directory of Open Access Journals (Sweden)

    Henning Sten Hansen

    2014-03-01

    Full Text Available Coastal zones are under severe pressure from anthropogenic activities, as well as on-going climate change with associated sea level rise and increased storminess. These challenges call for integrated and forward looking solutions. The concept on Integrated Coastal Zone Management, as defined during the last twenty years, provides the overall policy frames, but tools to support the planning and management efforts are almost lacking. Furthermore, the forward-looking dimension to embrace the effects of climate change is nearly absent in most implementations. The BLAST project, financed by the European Union Regional Fund through the INTERREG IV North Sea Region Programme, aimed at developing a web-based decision support system to assist Integrated Coastal Zone Management from a climate change perspective, and the current paper describes the methods used and the computing platform for implementing a decision support system. The software applied in developing the system is mainly Open Source components, thus, facilitating a more widespread use of the system.

  9. Platform-based production development

    DEFF Research Database (Denmark)

    Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

    2015-01-01

    Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

  10. Unraveling Platform Strategies: A Review from an Organizational Ambidexterity Perspective

    Directory of Open Access Journals (Sweden)

    Xing Wan

    2017-05-01

    Full Text Available Platform strategies, which highlight the interdependence in and evolution of business ecosystems, are increasingly relevant for sustainable business models in the digital era. So far, platform research has existed as a fragmented body of insights from different fields, but an integrated theoretical perspective can lead to a more coherent understanding of the research overall. Organizational ambidexterity emphasizes the balance between exploration and exploitation, which is particularly conducive to understanding the sustainability of a firm. Using an organizational ambidexterity perspective, the authors analyze five platform strategies: pricing, openness, integration, differentiation, and envelopment. This paper provides a systematic review of the theoretical and empirical studies in leading management, economics, and information systems journals from 2000 to 2016. The findings show that platform strategies can help platform owners achieve ambidexterity by domain, temporal, and organizational separation. Finally, this paper proposes an agenda for future research.

  11. PDTCM: a systems pharmacology platform of traditional Chinese medicine for psoriasis.

    Science.gov (United States)

    Wang, Dongmei; Gu, Jiangyong; Zhu, Wei; Luo, Fang; Chen, Lirong; Xu, Xiaojie; Lu, Chuanjian

    2017-12-01

    Psoriasis is a refractory skin disorder, and usually requires a lifetime control. Traditional Chinese medicine (TCM) is effective and safe for this disease. However, the cellular and molecular mechanisms of TCM remedies for psoriasis are still not fully understood. TCM contains numerous natural products. Natural products have historically been invaluable as a resource of therapeutic agents. Yet, there is no integrated information about active compounds of TCM for psoriasis. We use systems pharmacology methods to develop the Psoriasis Database of Traditional Chinese Medicine (PDTCM). The database covered a number of psoriasis-related information (formulas, TCM, compounds, target proteins, diseases and biomarkers). With these data information, an online platform was constructed Results: PDTCM comprises 38 empirical therapeutic formulas, 34373 compounds from 1424 medicinal plants, 44 psoriasis-related proteins and 76 biomarkers from 111 related diseases. On this platform, users can screen active compounds for a psoriasis-related target and explore molecular mechanisms of TCM. Accordingly, users can also download the retrieved structures and data information with a defined value set. In addition, it helps to get a better understanding of Chinese prescriptions in disease treatment. With the systems pharmacology-based data, PDTCM would become a valuable resource for TCM in psoriasis-related research. Key messages PDTCM platform comprises a great deal of data on TCM and psoriasis. On this platform, users can retrieve and get needed information with systems pharmacology methods, such as active compounds screening, target prediction and molecular mechanisms exploration. It is a tool for psoriasis-related research on natural drugs systematically.

  12. Development of test platform for digital I and C system evaluation

    International Nuclear Information System (INIS)

    Kim, Young Mi; Kwon, Yong Il

    2012-01-01

    Nuclear I and C (Instrument and Control) systems which need safety critical function have adopted various control units and communication protocols. These trends have been enlarged new nuclear plants design and upgrading of operating plants. Applying to these digital technologies to nuclear power plants has many good advantages, such as upgrade of functionality and performance and improvement of efficiency and economics. But, it also has several flaws. System designs have been more complicated and software reliability analysis and risk analysis have been more difficult. Also, cyber security problems came to the fore as I and C systems are connected through networks. The vulnerabilities of computer systems are vital to nuclear safety. Coping with the new IT technology of new and operating power plants, it is necessary to analyze verification technology and obtain regulatory technology through establishment of test platform. This paper presents test platform for digital I and C system evaluation of NPP

  13. Development of test platform for digital I and C system evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Mi; Kwon, Yong Il [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2012-10-15

    Nuclear I and C (Instrument and Control) systems which need safety critical function have adopted various control units and communication protocols. These trends have been enlarged new nuclear plants design and upgrading of operating plants. Applying to these digital technologies to nuclear power plants has many good advantages, such as upgrade of functionality and performance and improvement of efficiency and economics. But, it also has several flaws. System designs have been more complicated and software reliability analysis and risk analysis have been more difficult. Also, cyber security problems came to the fore as I and C systems are connected through networks. The vulnerabilities of computer systems are vital to nuclear safety. Coping with the new IT technology of new and operating power plants, it is necessary to analyze verification technology and obtain regulatory technology through establishment of test platform. This paper presents test platform for digital I and C system evaluation of NPP.

  14. Hybrid Exploration Agent Platform and Sensor Web System

    Science.gov (United States)

    Stoffel, A. William; VanSteenberg, Michael E.

    2004-01-01

    A sensor web to collect the scientific data needed to further exploration is a major and efficient asset to any exploration effort. This is true not only for lunar and planetary environments, but also for interplanetary and liquid environments. Such a system would also have myriad direct commercial spin-off applications. The Hybrid Exploration Agent Platform and Sensor Web or HEAP-SW like the ANTS concept is a Sensor Web concept. The HEAP-SW is conceptually and practically a very different system. HEAP-SW is applicable to any environment and a huge range of exploration tasks. It is a very robust, low cost, high return, solution to a complex problem. All of the technology for initial development and implementation is currently available. The HEAP Sensor Web or HEAP-SW consists of three major parts, The Hybrid Exploration Agent Platforms or HEAP, the Sensor Web or SW and the immobile Data collection and Uplink units or DU. The HEAP-SW as a whole will refer to any group of mobile agents or robots where each robot is a mobile data collection unit that spends most of its time acting in concert with all other robots, DUs in the web, and the HEAP-SWs overall Command and Control (CC) system. Each DU and robot is, however, capable of acting independently. The three parts of the HEAP-SW system are discussed in this paper. The Goals of the HEAP-SW system are: 1) To maximize the amount of exploration enhancing science data collected; 2) To minimize data loss due to system malfunctions; 3) To minimize or, possibly, eliminate the risk of total system failure; 4) To minimize the size, weight, and power requirements of each HEAP robot; 5) To minimize HEAP-SW system costs. The rest of this paper discusses how these goals are attained.

  15. ROS-TMS and Big Sensor Box: Platforms for Informationally Structured Environment

    OpenAIRE

    倉爪, 亮; ユンソク, ピョ; 辻, 徳生; 河村, 晃宏

    2017-01-01

    This paper proposes new software and hardware platforms for an informationally structured environment named ROS-TMS and Big Sensor Box. We started the development of a management system for an informationally structured environment named TMS (Town Management System) in Robot Town Project in 2005. Since then we are continuing our efforts for the improvement of the performance and the enhancement of the functions of the TMS. Recently, we launched a new version of TMS named ROS-TMS, which resolv...

  16. Developing cloud applications using the e-Science Central platform.

    Science.gov (United States)

    Hiden, Hugo; Woodman, Simon; Watson, Paul; Cala, Jacek

    2013-01-28

    This paper describes the e-Science Central (e-SC) cloud data processing system and its application to a number of e-Science projects. e-SC provides both software as a service (SaaS) and platform as a service for scientific data management, analysis and collaboration. It is a portable system and can be deployed on both private (e.g. Eucalyptus) and public clouds (Amazon AWS and Microsoft Windows Azure). The SaaS application allows scientists to upload data, edit and run workflows and share results in the cloud, using only a Web browser. It is underpinned by a scalable cloud platform consisting of a set of components designed to support the needs of scientists. The platform is exposed to developers so that they can easily upload their own analysis services into the system and make these available to other users. A representational state transfer-based application programming interface (API) is also provided so that external applications can leverage the platform's functionality, making it easier to build scalable, secure cloud-based applications. This paper describes the design of e-SC, its API and its use in three different case studies: spectral data visualization, medical data capture and analysis, and chemical property prediction.

  17. A data management system to enable urgent natural disaster computing

    Science.gov (United States)

    Leong, Siew Hoon; Kranzlmüller, Dieter; Frank, Anton

    2014-05-01

    Civil protection, in particular natural disaster management, is very important to most nations and civilians in the world. When disasters like flash floods, earthquakes and tsunamis are expected or have taken place, it is of utmost importance to make timely decisions for managing the affected areas and reduce casualties. Computer simulations can generate information and provide predictions to facilitate this decision making process. Getting the data to the required resources is a critical requirement to enable the timely computation of the predictions. An urgent data management system to support natural disaster computing is thus necessary to effectively carry out data activities within a stipulated deadline. Since the trigger of a natural disaster is usually unpredictable, it is not always possible to prepare required resources well in advance. As such, an urgent data management system for natural disaster computing has to be able to work with any type of resources. Additional requirements include the need to manage deadlines and huge volume of data, fault tolerance, reliable, flexibility to changes, ease of usage, etc. The proposed data management platform includes a service manager to provide a uniform and extensible interface for the supported data protocols, a configuration manager to check and retrieve configurations of available resources, a scheduler manager to ensure that the deadlines can be met, a fault tolerance manager to increase the reliability of the platform and a data manager to initiate and perform the data activities. These managers will enable the selection of the most appropriate resource, transfer protocol, etc. such that the hard deadline of an urgent computation can be met for a particular urgent activity, e.g. data staging or computation. We associated 2 types of deadlines [2] with an urgent computing system. Soft-hard deadline: Missing a soft-firm deadline will render the computation less useful resulting in a cost that can have severe

  18. NCI's Transdisciplinary High Performance Scientific Data Platform

    Science.gov (United States)

    Evans, Ben; Antony, Joseph; Bastrakova, Irina; Car, Nicholas; Cox, Simon; Druken, Kelsey; Evans, Bradley; Fraser, Ryan; Ip, Alex; Kemp, Carina; King, Edward; Minchin, Stuart; Larraondo, Pablo; Pugh, Tim; Richards, Clare; Santana, Fabiana; Smillie, Jon; Trenham, Claire; Wang, Jingbo; Wyborn, Lesley

    2016-04-01

    The Australian National Computational Infrastructure (NCI) manages Earth Systems data collections sourced from several domains and organisations onto a single High Performance Data (HPD) Node to further Australia's national priority research and innovation agenda. The NCI HPD Node has rapidly established its value, currently managing over 10 PBytes of datasets from collections that span a wide range of disciplines including climate, weather, environment, geoscience, geophysics, water resources and social sciences. Importantly, in order to facilitate broad user uptake, maximise reuse and enable transdisciplinary access through software and standardised interfaces, the datasets, associated information systems and processes have been incorporated into the design and operation of a unified platform that NCI has called, the National Environmental Research Data Interoperability Platform (NERDIP). The key goal of the NERDIP is to regularise data access so that it is easily discoverable, interoperable for different domains and enabled for high performance methods. It adopts and implements international standards and data conventions, and promotes scientific integrity within a high performance computing and data analysis environment. NCI has established a rich and flexible computing environment to access to this data, through the NCI supercomputer; a private cloud that supports both domain focused virtual laboratories and in-common interactive analysis interfaces; as well as remotely through scalable data services. Data collections of this importance must be managed with careful consideration of both their current use and the needs of the end-communities, as well as its future potential use, such as transitioning to more advanced software and improved methods. It is therefore critical that the data platform is both well-managed and trusted for stable production use (including transparency and reproducibility), agile enough to incorporate new technological advances and

  19. A new advanced software platform for nuclear power plant process information systems

    International Nuclear Information System (INIS)

    Sorsa, A.

    1993-01-01

    In the late 80s, ABB Stromberg Power Ltd. started the development of a new generation software platform for the power plant Process Information System (PIS). This development resulted in a software platform called Procontrol PMS. Procontrol PMS is a platform for fully distributed systems which provides the following features: distributed data processing, non-stop architecture, low-cost incremental expansion path, open network architecture, high functionality, effective application development environment, and advanced user interface services. A description of the structure of the Procontrol PMS software is given. ABB has received by May 1992 six orders for nuclear power plant PISs based on Procontrol PMS (4 for PWR plants, 2 for BWRs). The first Procontrol PMS based nuclear power plant PIS was commissioned in 1989 at the Loviisa nuclear power plant and has been running with 100% availability since the commissioning. (Z.S.) 2 figs

  20. OpenADAM: an open source genome-wide association data management system for Affymetrix SNP arrays

    Directory of Open Access Journals (Sweden)

    Sham P C

    2008-12-01

    Full Text Available Abstract Background Large scale genome-wide association studies have become popular since the introduction of high throughput genotyping platforms. Efficient management of the vast array of data generated poses many challenges. Description We have developed an open source web-based data management system for the large amount of genotype data generated from the Affymetrix GeneChip® Mapping Array and Affymetrix Genome-Wide Human SNP Array platforms. The database supports genotype calling using DM, BRLMM, BRLMM-P or Birdseed algorithms provided by the Affymetrix Power Tools. The genotype and corresponding pedigree data are stored in a relational database for efficient downstream data manipulation and analysis, such as calculation of allele and genotype frequencies, sample identity checking, and export of genotype data in various file formats for analysis using commonly-available software. A novel method for genotyping error estimation is implemented using linkage disequilibrium information from the HapMap project. All functionalities are accessible via a web-based user interface. Conclusion OpenADAM provides an open source database system for management of Affymetrix genome-wide association SNP data.

  1. Generic FMS Platform for Evaluation of Autonomous Trajectory-Based Operation Concepts, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this research is to create a generic advanced Flight Management System (FMS) platform that could be used for evaluation of autonomous...

  2. Data management in the mission data system

    Science.gov (United States)

    Wagner, David A.

    2005-01-01

    As spacecraft evolve from simple embedded devices to become more sophisticated computing platforms with complex behaviors it is increasingly necessary to model and manage the flow of data, and to provide uniform models for managing data that promote adaptability, yet pay heed to the physical limitations of the embedded and space environments.

  3. A translational platform for prototyping closed-loop neuromodulation systems

    Science.gov (United States)

    Afshar, Pedram; Khambhati, Ankit; Stanslaski, Scott; Carlson, David; Jensen, Randy; Linde, Dave; Dani, Siddharth; Lazarewicz, Maciej; Cong, Peng; Giftakis, Jon; Stypulkowski, Paul; Denison, Tim

    2013-01-01

    While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson's disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders. PMID:23346048

  4. The development of a computational platform to design and simulate on-board hydrogen storage systems

    DEFF Research Database (Denmark)

    Mazzucco, Andrea; Rokni, Masoud

    2017-01-01

    A computational platform is developed in the Modelica® language within the Dymola™ environment to provide a tool for the design and performance comparison of on-board hydrogen storage systems. The platform has been coupled with an open source library for hydrogen fueling stations to investigate...... the vehicular tank within the frame of a complete refueling system. The two technologies that are integrated in the platform are solid-state hydrogen storage in the form of metal hydrides and compressed gas systems. In this work the computational platform is used to compare the storage performance of two tank...... to a storage capacity four times larger than a tube-in-tube solution of the same size. The volumetric and gravimetric densities of the shell and tube are 2.46% and 1.25% respectively. The dehydriding ability of this solution is proven to withstand intense discharging conditions....

  5. Management System of content in an organization of photo archive in Escambray Journal.

    Directory of Open Access Journals (Sweden)

    Mirelys Rodríguez Hernández

    2012-06-01

    Full Text Available This investigation is about resources management in photography and corrects environments to increase knowledge of them in the journal office. The study was carried out in the entity mentioned before in the period from January to December 2010, this was made in two steps. In the first was made an observational study to identify the requirements of management system to support the service of photography and the second one was the local design as a space management for publishing, share and access to information. In the initial diagnosis was found the need of a system capable to manage the sources of photos in the Center. For the development of platform was considered the interactive models multidirectional in communication. It was analyzed the possibilities that bring the Management System of Content for Cuban journals. The Site was implementing with Zope/Plone, a server of application oriented towards objects, as free instruments for the generation of web portals.

  6. Design and implementation of a general and automatic test platform base on NI PXI system

    Science.gov (United States)

    Shi, Long

    2018-05-01

    Aiming at some difficulties of test equipment such as the short product life, poor generality and high development cost, a general and automatic test platform base on NI PXI system is designed in this paper, which is able to meet most test requirements of circuit boards. The test platform is devided into 5 layers, every layer is introduced in detail except for the "Equipment Under Test" layer. An output board of a track-side equipment, which is an important part of high speed train control system, is taken as an example to make the functional circuit test by the test platform. The results show that the test platform is easy to realize add-on functions development, automatic test, wide compatibility and strong generality.

  7. E-learning in radiology - the practical use of the content management system ILIAS

    International Nuclear Information System (INIS)

    Schuetze, B.; Mildenberger, P.; Kaemmerer, M.

    2006-01-01

    Purpose: Due to the possibility of using different kinds of visualization, e-learning has the advantage of allowing individualized learning. A check should be performed to determine whether the use of the web-based content management system ILIAS simplifies the writing and production of electronic learning modules in radiology. Materials and methods: Internet-based e-learning provides access to existing learning modules regardless of time and location, since fast Internet connections are readily available. Results: Web Content Management Systems (WCMS) are suitable platforms for imparting radiology-related information (visual abilities like the recognition of patterns as well as interdisciplinary specialized knowledge). The open source product ILIAS is a free WCMS. It is used by many universities and is accepted by both students and lecturers. Its modular and object-oriented software architecture makes it easy to adapt and enlarge the platform. The employment of e-learning standards such as LOM and SCORM within ILIAS makes it possible to reuse contents, even if the platform has to be changed. Conclusion: ILIAS renders it possible to provide students with texts, images, or files of any other kind within a learning context which is defined by the lecturer. Students can check their acquired knowledge via online testing and receive direct performance feedback. The significant interest that students have shown in ILIAS proves that e-learning can be a useful addition to conventional learning methods. (orig.)

  8. [E-Learning in radiology; the practical use of the content management system ILIAS].

    Science.gov (United States)

    Schütze, B; Mildenberger, P; Kämmerer, M

    2006-05-01

    Due to the possibility of using different kinds of visualization, e-learning has the advantage of allowing individualized learning. A check should be performed to determine whether the use of the web-based content management system ILIAS simplifies the writing and production of electronic learning modules in radiology. Internet-based e-learning provides access to existing learning modules regardless of time and location, since fast Internet connections are readily available. Web Content Management Systems (WCMS) are suitable platforms for imparting radiology-related information (visual abilities like the recognition of patterns as well as interdisciplinary specialized knowledge). The open source product ILIAS is a free WCMS. It is used by many universities and is accepted by both students and lecturers. Its modular and object-oriented software architecture makes it easy to adapt and enlarge the platform. The employment of e-learning standards such as LOM and SCORM within ILIAS makes it possible to reuse contents, even if the platform has to be changed. ILIAS renders it possible to provide students with texts, images, or files of any other kind within a learning context which is defined by the lecturer. Students can check their acquired knowledge via online testing and receive direct performance feedback. The significant interest that students have shown in ILIAS proves that e-learning can be a useful addition to conventional learning methods.

  9. A Universal Communication Framework and Navigation Control Software for Mobile Prototyping Platforms

    Directory of Open Access Journals (Sweden)

    Andreas Mitschele-Thiel

    2010-09-01

    Full Text Available In our contribution we would like to describe two new aspects of our low-cost mobile prototyping platform concept: a new hardware communication framework as well as new software features for navigation and control of our mobile platform. The paper is an extension of the ideas proposed in REV2009 [1] and is based on the therein used hardware platform and the monitoring and management software. This platform is based on the Quadrocopter concept – autonomous flying helicopter-style robots – and includes additional off-the-shelf parts. This leads to a universal mobile prototyping platform for communication tasks providing both mobile phone and WiFi access. However, the platform can provide these functions far more quickly than a technician on the ground might be able to. We will show that with our concept we can easily adapt the platform to the individual needs of the user, which leads to a very flexible and semi-autonomous system.

  10. New Modeling and Simulation Platform for Communications Systems:(I Double Sideband Suppressed Carrier AM Modulator DSB-SC

    Directory of Open Access Journals (Sweden)

    H. A. Ahmed

    2012-08-01

    Full Text Available The main goal of this paper is to introduce a new platform for the implementation and simulation of communication systems. SCILAB/SCICOS is an open source software for conducting communication system related experiments, aiming to provide an experimentation platform for research on communication theories. Double Sideband Suppressed Carrier (DSB-SC Modulator is modeled and simulated using this platform.

  11. The Spanish CEIDEN Technology Platform: Activities on Knowledge Management

    International Nuclear Information System (INIS)

    Velasco, R.; Montero, A.; Ruiz, F.; Leon, P.

    2016-01-01

    Full text: CEIDEN is a Spanish organization for the coordination of the needs and efforts on nuclear fission research and development (R&D). It was created in 1999 and since 2007 has the status of technology platform. The main functions of CEIDEN are to define and develop joint R&D projects, and to present a common position for national and international commitments and proposals in the nuclear fission R&D field. With around one hundred of Spanish members and a significant number of foreign collaborative entities, CEIDEN groups all sectors involved in this field. In 2011 the CEIDEN F+ permanent group was created to cope with the E&T issues. The main objectives of F+ are to promote the coordination of E&T programmes in a national level and to support the Spanish participation in international networks, programmes and projects in this field. Knowledge management is more and more a paramount issue that conditions the future of the Spanish nuclear sector, especially all the related to the generational replacement. In response to this challenge, a nuclear knowledge management group has been created recently in CEIDEN with the target of start coordinated initiatives in the Spanish nuclear sector, in this field. (author

  12. Tilt rotor tricopter : control system for the holonomic multirotor platform

    OpenAIRE

    Gjertsen, Sindre; Salem, Daniel

    2013-01-01

    Masteroppgave i mekatronikk MAS500 2013 – Universitetet i Agder, Grimstad Development of a new approach to the multicopter segment of the Unmanned Areal Vehicle (UAV) family is presented. The system is designed on a T-shaped tricopter platform with ability to tilt all three motors, hereby defined as Tilt Rotor Tricopter (TRT). The highly coupled nonlinear system is investigated through the mathematical model, and verified by simulations. Linearization of the system has been ach...

  13. Combination of Wearable Multi-Biosensor Platform and Resonance Frequency Training for Stress Management of the Unemployed Population

    Directory of Open Access Journals (Sweden)

    Wanqing Wu

    2012-09-01

    Full Text Available Currently considerable research is being directed toward developing methodologies for controlling emotion or releasing stress. An applied branch of the basic field of psychophysiology, known as biofeedback, has been developed to fulfill clinical and non-clinical needs related to such control. Wearable medical devices have permitted unobtrusive monitoring of vital signs and emerging biofeedback services in a pervasive manner. With the global recession, unemployment has become one of the most serious social problems; therefore, the combination of biofeedback techniques with wearable technology for stress management of unemployed population is undoubtedly meaningful. This article describes a wearable biofeedback system based on combining integrated multi-biosensor platform with resonance frequency training (RFT biofeedback strategy for stress management of unemployed population. Compared to commercial system, in situ experiments with multiple subjects indicated that our biofeedback system was discreet, easy to wear, and capable of offering ambulatory RFT biofeedback.Moreover, the comparative studies on the altered autonomic nervous system (ANS modulation before and after three week RFT biofeedback training was performed in unemployed population with the aid of our wearable biofeedback system. The achieved results suggested that RFT biofeedback in combination with wearable technology was capable of significantly increasingoverall HRV, which indicated by decreasing sympathetic activities, increasing parasympathetic activities, and increasing ANS synchronization. After 3-week RFT-based respiration training, the ANS’s regulating function and coping ability of unemployed population have doubled, and tended toward a dynamic balance.

  14. Globus Nexus: A Platform-as-a-Service Provider of Research Identity, Profile, and Group Management.

    Science.gov (United States)

    Chard, Kyle; Lidman, Mattias; McCollam, Brendan; Bryan, Josh; Ananthakrishnan, Rachana; Tuecke, Steven; Foster, Ian

    2016-03-01

    Globus Nexus is a professionally hosted Platform-as-a-Service that provides identity, profile and group management functionality for the research community. Many collaborative e-Science applications need to manage large numbers of user identities, profiles, and groups. However, developing and maintaining such capabilities is often challenging given the complexity of modern security protocols and requirements for scalable, robust, and highly available implementations. By outsourcing this functionality to Globus Nexus, developers can leverage best-practice implementations without incurring development and operations overhead. Users benefit from enhanced capabilities such as identity federation, flexible profile management, and user-oriented group management. In this paper we present Globus Nexus, describe its capabilities and architecture, summarize how several e-Science applications leverage these capabilities, and present results that characterize its scalability, reliability, and availability.

  15. Globus Nexus: A Platform-as-a-Service provider of research identity, profile, and group management

    Energy Technology Data Exchange (ETDEWEB)

    Chard, Kyle; Lidman, Mattias; McCollam, Brendan; Bryan, Josh; Ananthakrishnan, Rachana; Tuecke, Steven; Foster, Ian

    2016-03-01

    Globus Nexus is a professionally hosted Platform-as-a-Service that provides identity, profile and group management functionality for the research community. Many collaborative e-Science applications need to manage large numbers of user identities, profiles, and groups. However, developing and maintaining such capabilities is often challenging given the complexity of modern security protocols and requirements for scalable, robust, and highly available implementations. By outsourcing this functionality to Globus Nexus, developers can leverage best-practice implementations without incurring development and operations overhead. Users benefit from enhanced capabilities such as identity federation, flexible profile management, and user-oriented group management. In this paper we present Globus Nexus, describe its capabilities and architecture, summarize how several e-Science applications leverage these capabilities, and present results that characterize its scalability, reliability, and availability.

  16. Mobile platform security

    CERN Document Server

    Asokan, N; Dmitrienko, Alexandra

    2013-01-01

    Recently, mobile security has garnered considerable interest in both the research community and industry due to the popularity of smartphones. The current smartphone platforms are open systems that allow application development, also for malicious parties. To protect the mobile device, its user, and other mobile ecosystem stakeholders such as network operators, application execution is controlled by a platform security architecture. This book explores how such mobile platform security architectures work. We present a generic model for mobile platform security architectures: the model illustrat

  17. Networked Control System for the Guidance of a Four-Wheel Steering Agricultural Robotic Platform

    Directory of Open Access Journals (Sweden)

    Eduardo Paciência Godoy

    2012-01-01

    Full Text Available A current trend in the agricultural area is the development of mobile robots and autonomous vehicles for precision agriculture (PA. One of the major challenges in the design of these robots is the development of the electronic architecture for the control of the devices. In a joint project among research institutions and a private company in Brazil a multifunctional robotic platform for information acquisition in PA is being designed. This platform has as main characteristics four-wheel propulsion and independent steering, adjustable width, span of 1,80 m in height, diesel engine, hydraulic system, and a CAN-based networked control system (NCS. This paper presents a NCS solution for the platform guidance by the four-wheel hydraulic steering distributed control. The control strategy, centered on the robot manipulators control theory, is based on the difference between the desired and actual position and considering the angular speed of the wheels. The results demonstrate that the NCS was simple and efficient, providing suitable steering performance for the platform guidance. Even though the simplicity of the NCS solution developed, it also overcame some verified control challenges in the robot guidance system design such as the hydraulic system delay, nonlinearities in the steering actuators, and inertia in the steering system due the friction of different terrains.

  18. Integrated management systems and workflow-based electronic document management: An empirical study

    Directory of Open Access Journals (Sweden)

    Hang Thu Pho

    2014-01-01

    Full Text Available Purpose: Many global organizations have aligned their strategy and operation via the ISO-based framework of integrated management system (IMS that allows them to merge quality, environment, health and safety management systems. In such context, having a robust electronic document management system (EDMS is essential, especially at global enterprises where a large amount of documents generated by processes flows through different work cultures. However, there is no "one-size-fits-all" design for EDMS because it depends on organizations' needs, size and resource allocation. This article discusses the interrelation between EDMS and IMS in order to suggest a best practice. Design/methodology/approach: This article methodologically based upon a qualitative, interpretivistic, longitudinal empirical study in a wind turbine factory. Findings and Originality/value: IMS improvement and effectiveness has been overlooking EDMS as a key factor in establishing appropriate technological support of the IMS processes. Rightful application of EDMS can further contribute to organizational learning, precision of documentation and cross-organisational collaboration. Research limitations/implications: Theorising on IMS needs a stronger perspective of the technological limitations and potentials of basing IMS on EDMS. Practical implications: IMS are complex systems involving a large number of administrative functions. EDMS provides a formal representation with automation potentials both heightening and securing document trustworthiness. Social implications: IMS has a tendency to stay with professionals, e.g. line managers and QA/QC/QMS professionals. The EDMS line of discussion suggests a broader inclusion. Originality/value: Researching IMS as a technological implementation is giving a better platform of aligning the IMS with other business processes and is bringing IMS closer to the operational activities within the enterprise.

  19. A Platform-Based Methodology for System-Level Mixed-Signal Design

    Directory of Open Access Journals (Sweden)

    Alberto Sangiovanni-Vincentelli

    2010-01-01

    Full Text Available The complexity of today's embedded electronic systems as well as their demanding performance and reliability requirements are such that their design can no longer be tackled with ad hoc techniques while still meeting tight time to-market constraints. In this paper, we present a system level design approach for electronic circuits, utilizing the platform-based design (PBD paradigm as the natural framework for mixed-domain design formalization. In PBD, a meet-in-the-middle approach allows systematic exploration of the design space through a series of top-down mapping of system constraints onto component feasibility models in a platform library, which is based on bottom-up characterizations. In this framework, new designs can be assembled from the precharacterized library components, giving the highest priority to design reuse, correct assembly, and efficient design flow from specifications to implementation. We apply concepts from design centering to enforce robustness to modeling errors as well as process, voltage, and temperature variations, which are currently plaguing embedded system design in deep-submicron technologies. The effectiveness of our methodology is finally shown on the design of a pipeline A/D converter and two receiver front-ends for UMTS and UWB communications.

  20. IT–Enabled Knowledge Management System for Nuclear R&D Organization

    International Nuclear Information System (INIS)

    Jehadeesan, R.

    2016-01-01

    Full text: A knowledge management (KM) system for codification, preservation and utilization of all multi-disciplinary knowledge assets accumulated over several decades of nuclear research, development and operation is essential for improved organizational productivity, new insights and high-levels of innovation. IGCAR’s Nuclear Knowledge Management System deployed with IT-as-enabler addresses various challenges related to people, process, technology and resources and provides a technology platform to leverage the collective knowledge of the organization. This paper describes the strategic action plan and structured approach followed for building IT-enabled knowledge management system to acquire, store, share and utilize the organizational knowledge assets in the explicit form of publications, technical reports, presentations, projects, activities, facilities etc., along with the tacit knowledge multi-media modules. It highlights the salient features of the in-house-developed advanced KM portal deployed for facilitating the creation, archival, retrieval, sharing and dissemination of knowledge assets originating from diverse domains, in an organized and secured way. The paper also underlines the application of semantic technologies, tools and standards in implementing a robust KM technology infrastructure with enhanced functionalities. (author

  1. Urban air quality management and information systems in Europe: legal framework and information access

    International Nuclear Information System (INIS)

    Karatzas, K.; Moussiopoulos, N.

    2000-01-01

    The European Union (EU) legislative framework related to air quality, together with national legislation and relevant declarations of the United Nations (UN), requires an integrated approach concerning air quality management (AQM), and accessibility of related information for the citizens. In the present paper, the main requirements of this legislative framework are discussed and main air quality management and information system characteristics are drawn. The use of information technologies is recommended for the construction of such systems. The World Wide Web (WWW) is considered a suitable platform for system development and integration and at the same time as a medium for communication and information dissemination. (author)

  2. Urban air quality management and information systems in Europe: legal framework and information access

    Energy Technology Data Exchange (ETDEWEB)

    Karatzas, K.; Moussiopoulos, N. [Aristotle University of Thessaloniki (Greece). Department of Mechanical Engineering, Laboratory of Heat Transfer and Environmental Engineering

    2000-06-01

    The European Union (EU) legislative framework related to air quality, together with national legislation and relevant declarations of the United Nations (UN), requires an integrated approach concerning air quality management (AQM), and accessibility of related information for the citizens. In the present paper, the main requirements of this legislative framework are discussed and main air quality management and information system characteristics are drawn. The use of information technologies is recommended for the construction of such systems. The World Wide Web (WWW) is considered a suitable platform for system development and integration and at the same time as a medium for communication and information dissemination. (author)

  3. Testing RISKGIS Platform with Students to Improve Learning and Teaching Skills

    Science.gov (United States)

    Olyazadeh, R.; Aye, Z. C.; Jaboyedoff, M.; Derron, M. H.

    2016-12-01

    Nowadays, open-source developments in the field of natural hazards and risk management increase rapidly. The governments, NGOs and other research institutes are producing data for risk and disaster analysis, but a few platforms are available to bring a real-life experience to the students. This work focuses on the preliminary results of testing a WebGIS platform called RISKGIS with the bachelor students at the University of Lausanne. The platform is designed based on a geospatial open-source technology called OpenGeo (Boundless). This platform can calculate the potential risk of the buildings and assist the students to understand the situations for risk reduction mitigation and decision-making. The center of Jomsom in Nepal was selected for the first exercise that may be affected by amplifications of earthquake. The shaking intensity map was designed by an expert based on the geological characteristics and DEM (Digital Elevation Model) of the area. All buildings data were extracted from OpenStreetMap using QGIS and adapted to the platform. The video tutorial was prepared to guide the students through the platform, and 80 students have tested the application online successfully and 40 of them participated in Moodle (a free Open Source software package for educators) for online feedback and quiz. Among those, 30 of them have completely answered to both. We had interesting results for effectiveness, efficiency and satisfaction based on System Usability Scale (SUS). The SUS score for this platform was 68.6 out of 100. The average result of the quiz was 9.39 out of 10 with a duration of 8 to 33 minutes to answer the quiz. There were several outliers for this duration with 2 minutes (two students) and 9 to 18 hours (three students). Further exercises will be carried out with students by adding more advanced functions to the platform and improving the willingness of participation in this online learning platform. This project is funded by Fonds d'innovation p

  4. The Qatar National Historic Environment Record: a Platform for the Development of a Fully-Integrated Cultural Heritage Management Application

    Science.gov (United States)

    Cuttler, R. T. H.; Tonner, T. W. W.; Al-Naimi, F. A.; Dingwall, L. M.; Al-Hemaidi, N.

    2013-07-01

    The development of the Qatar National Historic Environment Record (QNHER) by the Qatar Museums Authority and the University of Birmingham in 2008 was based on a customised, bilingual Access database and ArcGIS. While both platforms are stable and well supported, neither was designed for the documentation and retrieval of cultural heritage data. As a result it was decided to develop a custom application using Open Source code. The core module of this application is now completed and is orientated towards the storage and retrieval of geospatial heritage data for the curation of heritage assets. Based on MIDAS Heritage data standards and regionally relevant thesauri, it is a truly bilingual system. Significant attention has been paid to the user interface, which is userfriendly and intuitive. Based on a suite of web services and accessed through a web browser, the system makes full use of internet resources such as Google Maps and Bing Maps. The application avoids long term vendor ''tie-ins'' and as a fully integrated data management system, is now an important tool for both cultural resource managers and heritage researchers in Qatar.

  5. Compensating Unknown Time-Varying Delay in Opto-Electronic Platform Tracking Servo System

    Directory of Open Access Journals (Sweden)

    Ruihong Xie

    2017-05-01

    Full Text Available This paper investigates the problem of compensating miss-distance delay in opto-electronic platform tracking servo system. According to the characteristic of LOS (light-of-sight motion, we setup the Markovian process model and compensate this unknown time-varying delay by feed-forward forecasting controller based on robust H∞ control. Finally, simulation based on double closed-loop PI (Proportion Integration control system indicates that the proposed method is effective for compensating unknown time-varying delay. Tracking experiments on the opto-electronic platform indicate that RMS (root-mean-square error is 1.253 mrad when tracking 10° 0.2 Hz signal.

  6. Spatial analysis and simulation tools for groundwater management: the FREEWAT platform

    Directory of Open Access Journals (Sweden)

    Rudy Rossetto

    2017-09-01

    Full Text Available FREEWAT is an HORIZON 2020 project financed by the EU Commission under the call WATER INNOVATION: BOOSTING ITS VALUE FOR EUROPE. FREEWAT main result is an open source and public domain GIS-integrated modeling environment for the simulation of groundwater quantity and quality, with an integrated water management and planning module. FREEWAT aims at promoting water resource management by simplifying the application of the Water Framework Directive and other EU water-related Directives. To this scope, the FREEWAT platform results from the integration in the QGIS Desktop of spatially distributed and physically-based codes (mostly belonging to the USGS MODFLOW family, which allow to get a deep insight in groundwater dynamics, taking into account the space and time variability of stresses which control the hydrological cycle. This is attempted in a unique GIS environment, where large spatial datasets can be managed and visualized. In this paper, a review of the tools/modules integrated in FREEWAT for data pre-processing and model implementation is provided. FREEWAT applicability was demonstrated through running 14 case studies, in the general framework of an innovative participatory approach, which consists in involving technical staff and relevant stakeholders (in primis policy and decision makers during modeling activities, thus creating a common environment to enhance science and evidence-based decision making in water resource management.

  7. Design of a SIP device cooperation system on OSGi service platforms

    Science.gov (United States)

    Takayama, Youji; Koita, Takahiro; Sato, Kenya

    2007-12-01

    Home networks feature such various technologies as protocols, specifications, and middleware, including HTTP, UPnP, and Jini. A service platform is required to handle such technologies to enable them to cooperate with different devices. The OSGi service platform, which meets the requirements based on service-oriented architecture, is designed and standardized by OSGi Alliance and consists of two parts: one OSGi Framework and bundles. On the OSGi service platform, APIs are defined as services that can handle these technologies and are implemented in the bundle. By using the OSGi Framework with bundles, various technologies can cooperate with each other. On the other hand, in IP networks, Session Initiation Protocol (SIP) is often used in device cooperation services to resolve an IP address, control a session between two or more devices, and easily exchange the statuses of devices. However, since many existing devices do not correspond to SIP, it cannot be used for device cooperation services. A device that does not correspond to SIP is called an unSIP device. This paper proposes and implements a prototype system that enables unSIP devices to correspond to SIP. For unSIP devices, the proposed system provides device cooperation services with SIP.

  8. Artistic and Engineering Design of Platform-Based Production Systems: A Study of Swedish Architectural Practice

    Directory of Open Access Journals (Sweden)

    Gustav Jansson

    2018-02-01

    Full Text Available Research on platform-based production systems for house-building has focused on production and manufacturing issues. The aim of this research is to explore how the architectural design process contributes to the industrialised house-building industry from the perspective of creative design work. It also aims to describe how constraints affect architectural design work in the engineer-to-order context, when using platform-based production systems. Architects with experience in using platform-based building systems with different degrees of constraints were interviewed regarding creative aspects of the design work. The interviews, together with documents relating to platform constraints, were then analysed from the perspective of artistic and engineering design theories. The results show the benefits and issues of using platform constraints, both with prefabrication of volumetric modules, as well as prefabricated slab and wall elements. The study highlights a major research gap by describing how architectural work, from both the creative artistic and engineering design perspectives, is affected by constraints in the building platform: (1 the architectural design work goes through a series of divergent and convergent processes where the divergent processes are explorative and the convergent processes are solution-oriented; and (2, there is a trade-off between creativity and efficiency in the design work. Open parameters for layout design are key to architectural creativity, while predefinition supports efficiency. The results also provide an understanding of the potential for creativity in artistic and engineering work tasks through different phases in design, and how they are related to constraints in the platform. The main limitation of the research is the number of interviewed architects who had different background experiences of working with different types of platform constraints. More studies are needed to confirm the observations and to

  9. Test Results of a Platform for Safety I and C Systems of SMART MMIS

    International Nuclear Information System (INIS)

    Suh, Yong Suk; Keum, Jong Yong; Jeong, Kwang Il; Lee, Joon Ku; Lee, Sang Seok; Kim, Kwan Woong

    2011-01-01

    SMART (System-integrated Modular Advanced ReacTor), a 330MWt integral pressurized light water reactor that integrates four reactor coolant pumps, one pressurizer, eight steam generators, and one reactor core into a reactor vessel, has been under development at KAERI since 1997. A standard design safety analysis report of the SMART prepared by KAERI was submitted to Korea institute of nuclear safety (KINS) at the end of 2010. KAERI aims to achieve standard design approval (SDA) from KINS by the end of 2011. SMART MMIS has been designed using digital systems. It has digital-based compact control rooms. Its instrumentation and control (I and C) systems are designed using modular equipment connected through datalinks. Non-safety I and C systems are designed based on the commercial distributed control systems. Safety I and C systems are based on a new platform developed by KAERI. The platform is a high-speed digital signal processor (DSP)-based control unit. It plays the role of a module that provides control functions of the safety I and C systems. The test facilities have been developed at KAERI since 2009. This paper presents the development and test results of the platform

  10. Architecturally Significant Requirements Identification, Classification and Change Management for Multi-tenant Cloud-Based Systems

    DEFF Research Database (Denmark)

    Chauhan, Muhammad Aufeef; Probst, Christian W.

    2017-01-01

    presented a framework for requirements classification and change management focusing on distributed Platform as a Service (PaaS) and Software as a Service (SaaS) systems as well as complex software ecosystems that are built using PaaS and SaaS, such as Tools as a Service (TaaS). We have demonstrated...

  11. Management information system of medical equipment using mobile devices

    Science.gov (United States)

    Núñez, C.; Castro, D.

    2011-09-01

    The large numbers of technologies currently incorporated into mobile devices transform them into excellent tools for capture and to manage the information, because of the increasing computing power and storage that allow to add many miscellaneous applications. In order to obtain benefits of these technologies, in the biomedical engineering field, it was developed a mobile information system for medical equipment management. The central platform for the system it's a mobile phone, which by a connection with a web server, it's capable to send and receive information relative to any medical equipment. Decoding a type of barcodes, known as QR-Codes, the management process is simplified and improved. These barcodes identified the medical equipments in a database, when these codes are photographed and decoded with the mobile device, you can access to relevant information about the medical equipment in question. This Project in it's actual state is a basic support tool for the maintenance of medical equipment. It is also a modern alternative, competitive and economic in the actual market.

  12. Optimal Remote Sensing with Small Unmanned Aircraft Systems and Risk Management

    Science.gov (United States)

    Stark, Brandon

    Over the past decade, the rapid rise of Unmanned Aircraft Systems (UASs) has blossomed into a new component of the aviation industry. Though regulations within the United States lagged, the promise of the ability of Small Unmanned Aircraft Systems (SUASs), or those UAS that weigh less than 55 lbs, has driven significant advances in small scale aviation technology. The dream of a small, low-cost aerial platform that can fly anywhere and keep humans safely away from the `dull, dangerous and dirty' jobs, has encouraged many to examine the possibilities of utilizing SUAS in new and transformative ways, especially as a new tool in remote sensing. However, as with any new tool, there remains significant challenges in realizing the full potential of SUAS-based remote sensing. Within this dissertation, two specific challenges are addressed: validating the use of SUAS as a remote sensing platform and improving the safety and management of SUAS. The use of SUAS in remote sensing is a relatively new challenge and while it has many similarities to other remote sensing platforms, the dynamic nature of its operation makes it unique. In this dissertation, a closer look at the methodology of using SUAS reveals that while many view SUAS as an alternative to satellite imagery, this is an incomplete view and that the current common implementation introduces a new source of error that has significant implications on the reliability of the data collected. It can also be seen that a new approach to remote sensing with an SUAS can be developed by addressing the spatial, spectral and temporal factors that can now be more finely adjusted with the use of SUAS. However, to take the full advantage of the potential of SUAS, they must uphold the promise of improved safety. This is not a trivial challenge, especially for the integration into the National Airspace System (NAS) and for the safety management and oversight of diverse UAS operations. In this dissertation, the challenge of integrating

  13. Learning Management Platform for CyberCIEGE

    Science.gov (United States)

    2011-12-01

    CLE is a platform that allows academic and research collaboration and it is built on open pedagogy and open standard [16]. In those situations...C. Irvine, “Active learning with the CyberCIEGE video game,” in Proceedings of the 4th Conference on Cyber Security Experimentation and Test, 2011

  14. A robotic home telehealth platform system for treatment adherence, social assistance and companionship - an overview.

    Science.gov (United States)

    Oddsson, Lars I E; Radomski, Mary V; White, Matthew; Nilsson, Daniel

    2009-01-01

    Well-known difficulties of making patients adhere to assigned treatments have made engineers and clinicians look towards technology for possible solutions. Recent studies have found that cell phone-based text messaging can help drive positive changes in patients' disease management and preventive health behavior. Furthermore, work in the area of assistive robotics indicates benefits for patients although robotic solutions tend to become expensive. However, continued improvement in sensor, computer and wireless technologies combined with decreases in cost is paving the way for development of affordable robotic systems that can help improve patient care and potentially add value to the healthcare system. This paper provides a high-level design overview of SKOTEE, the Sister Kenny hOme ThErapy systEm, an inexpensive robotic platform system designed to provide adherence support for home exercise programs, taking medication, appointment reminders and clinician communication. SKOTEE will also offer companionship as well as entertainment and social networking opportunities to the patient in their home. A video of the system is presented at the conference.

  15. The EGS Data Collaboration Platform: Enabling Scientific Discovery

    Energy Technology Data Exchange (ETDEWEB)

    Weers, Jonathan D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Johnston, Henry [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Huggins, Jay V [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-02-14

    Collaboration in the digital age has been stifled in recent years. Reasonable responses to legitimate security concerns have created a virtual landscape of silos and fortified castles incapable of sharing information efficiently. This trend is unfortunately opposed to the geothermal scientific community's migration toward larger, more collaborative projects. To facilitate efficient sharing of information between team members from multiple national labs, universities, and private organizations, the 'EGS Collab' team has developed a universally accessible, secure data collaboration platform and has fully integrated it with the U.S. Department of Energy's (DOE) Geothermal Data Repository (GDR) and the National Geothermal Data System (NGDS). This paper will explore some of the challenges of collaboration in the modern digital age, highlight strategies for active data management, and discuss the integration of the EGS Collab data management platform with the GDR to enable scientific discovery through the timely dissemination of information.

  16. A Cloud-Based Internet of Things Platform for Ambient Assisted Living

    Science.gov (United States)

    Cubo, Javier; Nieto, Adrián; Pimentel, Ernesto

    2014-01-01

    A common feature of ambient intelligence is that many objects are inter-connected and act in unison, which is also a challenge in the Internet of Things. There has been a shift in research towards integrating both concepts, considering the Internet of Things as representing the future of computing and communications. However, the efficient combination and management of heterogeneous things or devices in the ambient intelligence domain is still a tedious task, and it presents crucial challenges. Therefore, to appropriately manage the inter-connection of diverse devices in these systems requires: (1) specifying and efficiently implementing the devices (e.g., as services); (2) handling and verifying their heterogeneity and composition; and (3) standardizing and managing their data, so as to tackle large numbers of systems together, avoiding standalone applications on local servers. To overcome these challenges, this paper proposes a platform to manage the integration and behavior-aware orchestration of heterogeneous devices as services, stored and accessed via the cloud, with the following contributions: (i) we describe a lightweight model to specify the behavior of devices, to determine the order of the sequence of exchanged messages during the composition of devices; (ii) we define a common architecture using a service-oriented standard environment, to integrate heterogeneous devices by means of their interfaces, via a gateway, and to orchestrate them according to their behavior; (iii) we design a framework based on cloud computing technology, connecting the gateway in charge of acquiring the data from the devices with a cloud platform, to remotely access and monitor the data at run-time and react to emergency situations; and (iv) we implement and generate a novel cloud-based IoT platform of behavior-aware devices as services for ambient intelligence systems, validating the whole approach in real scenarios related to a specific ambient assisted living application

  17. A cloud-based Internet of Things platform for ambient assisted living.

    Science.gov (United States)

    Cubo, Javier; Nieto, Adrián; Pimentel, Ernesto

    2014-08-04

    A common feature of ambient intelligence is that many objects are inter-connected and act in unison, which is also a challenge in the Internet of Things. There has been a shift in research towards integrating both concepts, considering the Internet of Things as representing the future of computing and communications. However, the efficient combination and management of heterogeneous things or devices in the ambient intelligence domain is still a tedious task, and it presents crucial challenges. Therefore, to appropriately manage the inter-connection of diverse devices in these systems requires: (1) specifying and efficiently implementing the devices (e.g., as services); (2) handling and verifying their heterogeneity and composition; and (3) standardizing and managing their data, so as to tackle large numbers of systems together, avoiding standalone applications on local servers. To overcome these challenges, this paper proposes a platform to manage the integration and behavior-aware orchestration of heterogeneous devices as services, stored and accessed via the cloud, with the following contributions: (i) we describe a lightweight model to specify the behavior of devices, to determine the order of the sequence of exchanged messages during the composition of devices; (ii) we define a common architecture using a service-oriented standard environment, to integrate heterogeneous devices by means of their interfaces, via a gateway, and to orchestrate them according to their behavior; (iii) we design a framework based on cloud computing technology, connecting the gateway in charge of acquiring the data from the devices with a cloud platform, to remotely access and monitor the data at run-time and react to emergency situations; and (iv) we implement and generate a novel cloud-based IoT platform of behavior-aware devices as services for ambient intelligence systems, validating the whole approach in real scenarios related to a specific ambient assisted living application.

  18. Fundamentals of power integrity for computer platforms and systems

    CERN Document Server

    DiBene, Joseph T

    2014-01-01

    An all-encompassing text that focuses on the fundamentals of power integrity Power integrity is the study of power distribution from the source to the load and the system level issues that can occur across it. For computer systems, these issues can range from inside the silicon to across the board and may egress into other parts of the platform, including thermal, EMI, and mechanical. With a focus on computer systems and silicon level power delivery, this book sheds light on the fundamentals of power integrity, utilizing the author's extensive background in the power integrity industry and un

  19. Formal Analysis of Security Models for Mobile Devices, Virtualization Platforms, and Domain Name Systems

    Directory of Open Access Journals (Sweden)

    Gustavo Betarte

    2015-12-01

    Full Text Available In this work we investigate the security of security-critical applications, i.e. applications in which a failure may produce consequences that are unacceptable. We consider three areas: mobile devices, virtualization platforms, and domain name systems. The Java Micro Edition platform defines the Mobile Information Device Profile (MIDP to facilitate the development of applications for mobile devices, like cell phones and PDAs. We first study and compare formally several variants of the security model specified by MIDP to access sensitive resources of a mobile device. Hypervisors allow multiple guest operating systems to run on shared hardware, and offer a compelling means of improving the security and the flexibility of software systems. In this work we present a formalization of an idealized model of a hypervisor. We establish (formally that the hypervisor ensures strong isolation properties between the different operating systems, and guarantees that requests from guest operating systems are eventually attended. We show also that virtualized platforms are transparent, i.e. a guest operating system cannot distinguish whether it executes alone or together with other guest operating systems on the platform. The Domain Name System Security Extensions (DNSSEC is a suite of specifications that provides origin authentication and integrity assurance services for DNS data. We finally introduce a minimalistic specification of a DNSSEC model which provides the grounds needed to formally state and verify security properties concerning the chain of trust of the DNSSEC tree. We develop all our formalizations in the Calculus of Inductive Constructions --formal language that combines a higher-order logic and a richly-typed functional programming language-- using the Coq proof assistant.

  20. Optimal Energy Management, Location and Size for Stationary Energy Storage System in a Metro Line Based on Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Huan Xia

    2015-10-01

    Full Text Available The installation of stationary super-capacitor energy storage system (ESS in metro systems can recycle the vehicle braking energy and improve the pantograph voltage profile. This paper aims to optimize the energy management, location, and size of stationary super-capacitor ESSes simultaneously and obtain the best economic efficiency and voltage profile of metro systems. Firstly, the simulation platform of an urban rail power supply system, which includes trains and super-capacitor energy storage systems, is established. Then, two evaluation functions from the perspectives of economic efficiency and voltage drop compensation are put forward. Ultimately, a novel optimization method that combines genetic algorithms and a simulation platform of urban rail power supply system is proposed, which can obtain the best energy management strategy, location, and size for ESSes simultaneously. With actual parameters of a Chinese metro line applied in the simulation comparison, certain optimal scheme of ESSes’ energy management strategy, location, and size obtained by a novel optimization method can achieve much better performance of metro systems from the perspectives of two evaluation functions. The simulation result shows that with the increase of weight coefficient, the optimal energy management strategy, locations and size of ESSes appear certain regularities, and the best compromise between economic efficiency and voltage drop compensation can be obtained by a novel optimization method, which can provide a valuable reference to subway company.

  1. Administration Interface in an e-Testing Software Platform

    Directory of Open Access Journals (Sweden)

    Diana BUTUCEA

    2011-09-01

    Full Text Available Administration interfaces represent a subject that requires an in-depth analysis. Due to the complex tasks it needs to execute, the developer of such interfaces must find a perfect balance between aesthetics, functionality, ergonomics and modularity of it. While web users become more and more selective into choosing the websites they browse, the interface of any application must be impeccable. Since e-testing software platforms require a complex content management system, the paper will provide arguments over functionality, aesthetics, ergonomics and modularity of such platforms. An in-depth comparison over four CMSs will be made and a model of implementation will also be presented focusing on the administration interface and the functionalities it offers.

  2. Reconnaissance blind multi-chess: an experimentation platform for ISR sensor fusion and resource management

    Science.gov (United States)

    Newman, Andrew J.; Richardson, Casey L.; Kain, Sean M.; Stankiewicz, Paul G.; Guseman, Paul R.; Schreurs, Blake A.; Dunne, Jeffrey A.

    2016-05-01

    This paper introduces the game of reconnaissance blind multi-chess (RBMC) as a paradigm and test bed for understanding and experimenting with autonomous decision making under uncertainty and in particular managing a network of heterogeneous Intelligence, Surveillance and Reconnaissance (ISR) sensors to maintain situational awareness informing tactical and strategic decision making. The intent is for RBMC to serve as a common reference or challenge problem in fusion and resource management of heterogeneous sensor ensembles across diverse mission areas. We have defined a basic rule set and a framework for creating more complex versions, developed a web-based software realization to serve as an experimentation platform, and developed some initial machine intelligence approaches to playing it.

  3. Mechatronics design and experimental verification of an electric-vehicle-based hybrid thermal management system

    Directory of Open Access Journals (Sweden)

    Yi-Hsuan Hung

    2016-02-01

    Full Text Available In this study, an electric-vehicle-based thermal management system was designed for dual energy sources. An experimental platform developed in a previous study was modified. Regarding the mechanical components, a heat exchanger with a radiator, proportional valve, coolant pipes, and coolant pump was appropriately integrated. Regarding the electric components, two heaters emulating waste heat were controlled using two programmable power supply machines. A rapid-prototyping controller with two temperature inputs and three outputs was designed. Rule-based control strategies were coded to maintain optimal temperatures for the emulated proton exchange membrane fuel cells and lithium batteries. To evaluate the heat power of dual energy sources, driving cycles, energy management control, and efficiency maps of energy sources were considered for deriving time-variant values. The main results are as follows: (a an advanced mechatronics platform was constructed; (b a driving cycle simulation was successfully conducted; and (c coolant temperatures reached their optimal operating ranges when the proportional valve, radiator, and coolant pump were sequentially controlled. The benefits of this novel electric-vehicle-based thermal management system are (a high-efficiency operation of energy sources, (b low occupied volume integrated with energy sources, and (c higher electric vehicle traveling mileage. This system will be integrated with real energy sources and a real electric vehicle in the future.

  4. Performance simulation in high altitude platforms (HAPs) communications systems

    Science.gov (United States)

    Ulloa-Vásquez, Fernando; Delgado-Penin, J. A.

    2002-07-01

    This paper considers the analysis by simulation of a digital narrowband communication system for an scenario which consists of a High-Altitude aeronautical Platform (HAP) and fixed/mobile terrestrial transceivers. The aeronautical channel is modelled considering geometrical (angle of elevation vs. horizontal distance of the terrestrial reflectors) and statistical arguments and under these circumstances a serial concatenated coded digital transmission is analysed for several hypothesis related to radio-electric coverage areas. The results indicate a good feasibility for the communication system proposed and analysed.

  5. ITS Platform North Denmark

    DEFF Research Database (Denmark)

    Lahrmann, Harry; Agerholm, Niels; Juhl, Jens

    2012-01-01

    This paper presents the project entitled “ITS Platform North Denmark” which is used as a test platform for Intelligent Transportation System (ITS) solutions. The platform consists of a newly developed GNSS/GPRS On Board Unit (OBU) to be installed in 500 cars, a backend server and a specially...

  6. Leveraging socially networked mobile ICT platforms for the last-mile delivery problem.

    Science.gov (United States)

    Suh, Kyo; Smith, Timothy; Linhoff, Michelle

    2012-09-04

    Increasing numbers of people are managing their social networks on mobile information and communication technology (ICT) platforms. This study materializes these social relationships by leveraging spatial and networked information for sharing excess capacity to reduce the environmental impacts associated with "last-mile" package delivery systems from online purchases, particularly in low population density settings. Alternative package pickup location systems (PLS), such as a kiosk on a public transit platform or in a grocery store, have been suggested as effective strategies for reducing package travel miles and greenhouse gas emissions, compared to current door-to-door delivery models (CDS). However, our results suggest that a pickup location delivery system operating in a suburban setting may actually increase travel miles and emissions. Only once a social network is employed to assist in package pickup (SPLS) are significant reductions in the last-mile delivery distance and carbon emissions observed across both urban and suburban settings. Implications for logistics management's decades-long focus on improving efficiencies of dedicated distribution systems through specialization, as well as for public policy targeting carbon emissions of the transport sector are discussed.

  7. USA Hire Testing Platform

    Data.gov (United States)

    Office of Personnel Management — The USA Hire Testing Platform delivers tests used in hiring for positions in the Federal Government. To safeguard the integrity of the hiring processes and ensure...

  8. Research and Deployment a Hospital Open Software Platform for e-Health on the Grid System at VAST/IAMI

    Science.gov (United States)

    van Tuyet, Dao; Tuan, Ngo Anh; van Lang, Tran

    Grid computing has been an increasing topic in recent years. It attracts the attention of many scientists from many fields. As a result, many Grid systems have been built for serving people's demands. At present, many tools for developing the Grid systems such as Globus, gLite, Unicore still developed incessantly. Especially, gLite - the Grid Middleware - was developed by the Europe Community scientific in recent years. Constant growth of Grid technology opened the way for new opportunities in term of information and data exchange in a secure and collaborative context. These new opportunities can be exploited to offer physicians new telemedicine services in order to improve their collaborative capacities. Our platform gives physicians an easy method to use telemedicine environment to manage and share patient's information (such as electronic medical record, images formatted DICOM) between remote locations. This paper presents the Grid Infrastructure based on gLite; some main components of gLite; the challenge scenario in which new applications can be developed to improve collaborative work between scientists; the process of deploying Hospital Open software Platform for E-health (HOPE) on the Grid.

  9. Data exchange between zero dimensional code and physics platform in the CFETR integrated system code

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Guoliang [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Shi, Nan [Institute of Plasma Physics, Chinese Academy of Sciences, No. 350 Shushanhu Road, Hefei (China); Zhou, Yifu; Mao, Shifeng [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Jian, Xiang [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, School of Electrical and Electronics Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Chen, Jiale [Institute of Plasma Physics, Chinese Academy of Sciences, No. 350 Shushanhu Road, Hefei (China); Liu, Li; Chan, Vincent [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China); Ye, Minyou, E-mail: yemy@ustc.edu.cn [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei 230026 China (China)

    2016-11-01

    Highlights: • The workflow of the zero dimensional code and the multi-dimension physics platform of CFETR integrated system codeis introduced. • The iteration process among the codes in the physics platform. • The data transfer between the zero dimensionalcode and the physical platform, including data iteration and validation, and justification for performance parameters.. - Abstract: The China Fusion Engineering Test Reactor (CFETR) integrated system code contains three parts: a zero dimensional code, a physics platform and an engineering platform. We use the zero dimensional code to identify a set of preliminary physics and engineering parameters for CFETR, which is used as input to initiate multi-dimension studies using the physics and engineering platform for design, verification and validation. Effective data exchange between the zero dimensional code and the physical platform is critical for the optimization of CFETR design. For example, in evaluating the impact of impurity radiation on core performance, an open field line code is used to calculate the impurity transport from the first-wall boundary to the pedestal. The impurity particle in the pedestal are used as boundary conditions in a transport code for calculating impurity transport in the core plasma and the impact of core radiation on core performance. Comparison of the results from the multi-dimensional study to those from the zero dimensional code is used to further refine the controlled radiation model. The data transfer between the zero dimensional code and the physical platform, including data iteration and validation, and justification for performance parameters will be presented in this paper.

  10. Security analysis of Aspiro Music Platform, a digital music streaming service

    OpenAIRE

    Kachanovskiy, Roman

    2010-01-01

    The report is mainly based on recommendations given by the National Institute of Standards and Technology in special publication 800-30 ``Risk Management Guide for Information Technology Systems''. The risk analysis presented in this report emphasizes a qualitative approach. Firstly, the security requirements for Aspiro Music Platform were identified and classified by the level of importance. Secondly, potential threats to the system were discussed. In the next step the potential system ...

  11. Application of instrument platform based embedded Linux system on intelligent scaler

    International Nuclear Information System (INIS)

    Wang Jikun; Yang Run'an; Xia Minjian; Yang Zhijun; Li Lianfang; Yang Binhua

    2011-01-01

    It designs a instrument platform based on embedded Linux system and peripheral circuit, by designing Linux device driver and application program based on QT Embedded, various functions of the intelligent scaler are realized. The system architecture is very reasonable, so the stability and the expansibility and the integration level are increased, the development cycle is shorten greatly. (authors)

  12. A Novel Software Platform Extending Advances in Monitoring Technologies to On-demand Decision Support

    Science.gov (United States)

    Ormerod, R.; Scholl, M.

    2017-12-01

    Rapid evolution is occurring in the monitoring and assessment of air emissions and their impacts. The development of next generation lower cost sensor technologies creates the potential for much more intensive and far-reaching monitoring networks that provide spatially rich data. While much attention at present is being directed at the types and performance characteristics of sensor technologies, it is important also that the full potential of rich data sources be realized. Parallel to sensor developments, software platforms to display and manage data in real time are increasingly common adjuncts to sensor networks. However, the full value of data can be realized by extending platform capabilities to include complex scientific functions that are integrated into an action-oriented management framework. Depending on the purpose and nature of a monitoring network, there will be a variety of potential uses of the data or its derivatives, for example: statistical analysis for policy development, event analysis, real-time issue management including emergency response and complaints, and predictive management. Moving these functions into an on-demand, optionally mobile, environment greatly increases the value and accessibility of the data. Increased interplay between monitoring data and decision-making in an operational environment is optimised by a system that is designed with equal weight on technical robustness and user experience. A system now being used by several regulatory agencies and a larger number of industries in the US, Latin America, Europe, Australia and Asia has been developed to provide a wide range of on-demand decision-support in addition to the basic data collection, display and management that most platforms offer. With stable multi-year operation, the platform, known as Envirosuite, is assisting organisations to both reduce operating costs and improve environmental performance. Some current examples of its application across a range of applications

  13. A Big Data Platform for Storing, Accessing, Mining and Learning Geospatial Data

    Science.gov (United States)

    Yang, C. P.; Bambacus, M.; Duffy, D.; Little, M. M.

    2017-12-01

    Big Data is becoming a norm in geoscience domains. A platform that is capable to effiently manage, access, analyze, mine, and learn the big data for new information and knowledge is desired. This paper introduces our latest effort on developing such a platform based on our past years' experiences on cloud and high performance computing, analyzing big data, comparing big data containers, and mining big geospatial data for new information. The platform includes four layers: a) the bottom layer includes a computing infrastructure with proper network, computer, and storage systems; b) the 2nd layer is a cloud computing layer based on virtualization to provide on demand computing services for upper layers; c) the 3rd layer is big data containers that are customized for dealing with different types of data and functionalities; d) the 4th layer is a big data presentation layer that supports the effient management, access, analyses, mining and learning of big geospatial data.

  14. A Retrospective Review of the Clinical Characteristics and Blood Glucose Data from Cellnovo System Users using Data Collected from the Cellnovo Online Platform.

    Science.gov (United States)

    Hautier-Suply, Olivia; Friedmann, Yasmin; Shapley, Julian

    2018-04-01

    Technological advances have led to innovative insulin delivery systems for patients with type 1 diabetes mellitus. In particular, the combination of miniature engineering and software algorithms contained in continuous subcutaneous insulin infusion (CSII) system pumps provide the user and the healthcare practitioner with an opportunity to review and adjust blood glucose (BG) levels according to system feedback, and to modify or programme their regimen according to their needs. While CSII pumps record a number of data parameters such as BG level, carbohydrate intake, activity and insulin delivered, these data are generally 'locked in' and can only be accessed by uploading to a cloud-based system, thus information is not contemporaneous. The Cellnovo Diabetes Management System (Cellnovo, Bridgend, UK) allows data to be transmitted securely and wirelessly in real time to a secure server, which is then retrieved by an online platform, the Cellnovo Online platform, enabling continuous access by the user and by clinicians. In this article, the authors describe a retrospective review of the patient data automatically uploaded to the Cellnovo Online platform. Baseline clinical and demographic characteristics collected at the start of pump therapy are shown for all patients, and BG data from a sub-cohort of patients who have been using the system for at least 6 months and who take and record an average of three BG level tests per day are presented to demonstrate glycaemic data over time.

  15. Android Multi-Level System Permission Management Approach

    OpenAIRE

    Luo, Yang; Zhang, Qixun; Shen, Qingni; Liu, Hongzhi; Wu, Zhonghai

    2017-01-01

    With the expansion of the market share occupied by the Android platform, security issues (especially application security) have become attention focus of researchers. In fact, the existing methods lack the capabilities to manage application permissions without root privilege. This study proposes a dynamic management mechanism of Android application permissions based on security policies. The paper first describes the permissions by security policies, then implementes permission checking code ...

  16. Integrated System Health Management (ISHM) Technology Demonstration Project Final Report

    Science.gov (United States)

    Mackey, Ryan; Iverson, David; Pisanich, Greg; Toberman, Mike; Hicks, Ken

    2006-01-01

    Integrated System Health Management (ISHM) is an essential capability that will be required to enable upcoming explorations mission systems such as the Crew Exploration Vehicle (CEV) and Crew Launch Vehicle (CLV), as well as NASA aeronautics missions. However, the lack of flight experience and available test platforms have held back the infusion by NASA Ames Research Center (ARC) and the Jet Propulsion Laboratory (JPL) of ISHM technologies into future space and aeronautical missions. To address this problem, a pioneer project was conceived to use a high-performance aircraft as a low-cost proxy to develop, mature, and verify the effectiveness of candidate ISHM technologies. Given the similarities between spacecraft and aircraft, an F/A-18 currently stationed at Dryden Flight Research Center (DFRC) was chosen as a suitable host platform for the test bed. This report describes how the test bed was conceived, how the technologies were integrated on to the aircraft, and how these technologies were matured during the project. It also describes the lessons learned during the project and a forward path for continued work.

  17. Cloud Computing Platform for an Online Model Library System

    Directory of Open Access Journals (Sweden)

    Mingang Chen

    2013-01-01

    Full Text Available The rapid developing of digital content industry calls for online model libraries. For the efficiency, user experience, and reliability merits of the model library, this paper designs a Web 3D model library system based on a cloud computing platform. Taking into account complex models, which cause difficulties in real-time 3D interaction, we adopt the model simplification and size adaptive adjustment methods to make the system with more efficient interaction. Meanwhile, a cloud-based architecture is developed to ensure the reliability and scalability of the system. The 3D model library system is intended to be accessible by online users with good interactive experiences. The feasibility of the solution has been tested by experiments.

  18. Developing wearable bio-feedback systems: a general-purpose platform.

    Science.gov (United States)

    Bianchi, Luigi; Babiloni, Fabio; Cincotti, Febo; Arrivas, Marco; Bollero, Patrizio; Marciani, Maria Grazia

    2003-06-01

    Microprocessors, even those in PocketPCs, have adequate power for many real-time biofeedback applications for disabled people. This power allows design of portable or wearable devices that are smaller and lighter, and that have longer battery life compared to notebook-based systems. In this paper, we discuss a general-purpose hardware/software solution based on industrial or consumer devices and a C++ framework. Its flexibility and modularity make it adaptable to a wide range of situations. Moreover, its design minimizes system requirements and programming effort, thus allowing efficient systems to be built quickly and easily. Our design has been used to build two brain computer interface systems that were easily ported from the Win32 platform.

  19. Positive technology: a free mobile platform for the self-management of psychological stress.

    Science.gov (United States)

    Gaggioli, Andrea; Cipresso, Pietro; Serino, Silvia; Campanaro, Danilo Marco; Pallavicini, Federica; Wiederhold, Brenda K; Riva, Giuseppe

    2014-01-01

    We describe the main features and preliminary evaluation of Positive Technology, a free mobile platform for the self-management of psychological stress (http://positiveapp.info/). The mobile platform features three main components: (i) guided relaxation, which provides the user with the opportunity of browsing a gallery of relaxation music and video-narrative resources for reducing stress; (ii) 3D biofeedback, which helps the user learning to control his/her responses, by visualizing variations of heart rate in an engaging 3D environment; (iii) stress tracking, by the recording of heart rate and self-reports. We evaluated the Positive Technology app in an online trial involving 32 participants, out of which 7 used the application in combination with the wrist sensor. Overall, feedback from users was satisfactory and the analysis of data collected online indicated the capability of the app for reducing perceived stress levels. A future goal is to improve the usability of the application and include more advanced stress monitoring features, based on the analysis of heart rate variability indexes.

  20. Identification of COPD patients' health status using an intelligent system in the CHRONIOUS wearable platform.

    Science.gov (United States)

    Bellos, Christos C; Papadopoulos, Athanasios; Rosso, Roberto; Fotiadis, Dimitrios I

    2014-05-01

    The CHRONIOUS system offers an integrated platform aiming at the effective management and real-time assessment of the health status of the patient suffering from chronic obstructive pulmonary disease (COPD). An intelligent system is developed for the analysis and the real-time evaluation of patient's condition. A hybrid classifier has been implemented on a personal digital assistant, combining a support vector machine, a random forest, and a rule-based system to provide a more advanced categorization scheme for the early and in real-time characterization of a COPD episode. This is followed by a severity estimation algorithm which classifies the identified pathological situation in different levels and triggers an alerting mechanism to provide an informative and instructive message/advice to the patient and the clinical supervisor. The system has been validated using data collected from 30 patients that have been annotated by experts indicating 1) the severity level of the current patient's health status, and 2) the COPD disease level of the recruited patients according to the GOLD guidelines. The achieved characterization accuracy has been found 94%.

  1. Ocean Data Interoperability Platform (ODIP): developing a common framework for global marine data management

    Science.gov (United States)

    Glaves, H. M.

    2015-12-01

    In recent years marine research has become increasingly multidisciplinary in its approach with a corresponding rise in the demand for large quantities of high quality interoperable data as a result. This requirement for easily discoverable and readily available marine data is currently being addressed by a number of regional initiatives with projects such as SeaDataNet in Europe, Rolling Deck to Repository (R2R) in the USA and the Integrated Marine Observing System (IMOS) in Australia, having implemented local infrastructures to facilitate the exchange of standardised marine datasets. However, each of these systems has been developed to address local requirements and created in isolation from those in other regions.Multidisciplinary marine research on a global scale necessitates a common framework for marine data management which is based on existing data systems. The Ocean Data Interoperability Platform project is seeking to address this requirement by bringing together selected regional marine e-infrastructures for the purposes of developing interoperability across them. By identifying the areas of commonality and incompatibility between these data infrastructures, and leveraging the development activities and expertise of these individual systems, three prototype interoperability solutions are being created which demonstrate the effective sharing of marine data and associated metadata across the participating regional data infrastructures as well as with other target international systems such as GEO, COPERNICUS etc.These interoperability solutions combined with agreed best practice and approved standards, form the basis of a common global approach to marine data management which can be adopted by the wider marine research community. To encourage implementation of these interoperability solutions by other regional marine data infrastructures an impact assessment is being conducted to determine both the technical and financial implications of deploying them

  2. Quality management system

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Mu Sung

    2009-08-15

    This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

  3. Quality management system

    International Nuclear Information System (INIS)

    Lee, Mu Sung

    2009-08-01

    This book deals with ISO9001 quality management system which includes summary of this system such as classification of quality, principle of quality management, and definition, requirement and procedure of quality management system, introduction of ISO9001 system like model of ISO9001 quality management system, ISO certificate system, structure of ISO9001 standard, requirement of ISO9001 quality management system, process approach and documentation of system, propel cases of ISO9001 quality management system.

  4. NASA's Space Launch System: A Heavy-Lift Platform for Entirely New Missions

    Science.gov (United States)

    Creech, Stephen A.

    2012-01-01

    The National Aeronautics and Space Administration s (NASA's) Space Launch System (SLS) will contribute a new capability for human space flight and scientific missions beyond low-Earth orbit. The SLS Program, managed at NASA s Marshall Space Fight Center, will develop the heavy-lift vehicle that will launch the Orion Multi-Purpose Crew Vehicle (MPCV), equipment, supplies, and major science missions. Orion will carry crews to space, provide emergency abort capability, sustain the crew during space travel, and provide safe reentry from deep-space return velocities. Supporting Orion s first autonomous flight to lunar orbit and back in 2017 and its first crewed flight in 2021, the SLS ultimately offers a flexible platform for both human and scientific exploration. The SLS plan leverages legacy infrastructure and hardware in NASA s inventory, as well as continues with advanced propulsion technologies now in development, to deliver an initial 70 metric ton (t) lift capability in 2017, evolving to a 130-t capability after 2021, using a block upgrade approach. This paper will give an overview of the SLS design and management approach against a backdrop of the missions it will support. It will detail the plan to deliver the initial SLS capability to the launch pad in the near term, as well as summarize the innovative approaches the SLS team is applying to deliver a safe, affordable, and sustainable long-range capability for entirely new missions opening a new realm of knowledge and a world of possibilities for multiple partners. Design reference missions that the SLS is being planned to support include asteroids, Lagrange Points, and Mars, among others. The Agency is developing its mission manifest in parallel with the development of a heavy-lift flagship that will dramatically increase total lift and volume capacity beyond current launch vehicle options, reduce trip times, and provide a robust platform for conducting new missions destined to rewrite textbooks with the

  5. Design and Evaluation of a Pervasive Coaching and Gamification Platform for Young Diabetes Patients.

    Science.gov (United States)

    Klaassen, Randy; Bul, Kim C M; Op den Akker, Rieks; van der Burg, Gert Jan; Kato, Pamela M; Di Bitonto, Pierpaolo

    2018-01-30

    Self monitoring, personal goal-setting and coaching, education and social support are strategies to help patients with chronic conditions in their daily care. Various tools have been developed, e.g., mobile digital coaching systems connected with wearable sensors, serious games and patient web portals to personal health records, that aim to support patients with chronic conditions and their caregivers in realizing the ideal of self-management. We describe a platform that integrates these tools to support young patients in diabetes self-management through educational game playing, monitoring and motivational feedback. We describe the design of the platform referring to principles from healthcare, persuasive system design and serious game design. The virtual coach is a game guide that can also provide personalized feedback about the user's daily care related activities which have value for making progress in the game world. User evaluations with patients under pediatric supervision revealed that the use of mobile technology in combination with web-based elements is feasible but some assumptions made about how users would connect to the platform were not satisfied in reality, resulting in less than optimal user experiences. We discuss challenges with suggestions for further development of integrated pervasive coaching and gamification platforms in medical practice.

  6. Design and Evaluation of a Pervasive Coaching and Gamification Platform for Young Diabetes Patients

    Directory of Open Access Journals (Sweden)

    Randy Klaassen

    2018-01-01

    Full Text Available Self monitoring, personal goal-setting and coaching, education and social support are strategies to help patients with chronic conditions in their daily care. Various tools have been developed, e.g., mobile digital coaching systems connected with wearable sensors, serious games and patient web portals to personal health records, that aim to support patients with chronic conditions and their caregivers in realizing the ideal of self-management. We describe a platform that integrates these tools to support young patients in diabetes self-management through educational game playing, monitoring and motivational feedback. We describe the design of the platform referring to principles from healthcare, persuasive system design and serious game design. The virtual coach is a game guide that can also provide personalized feedback about the user’s daily care related activities which have value for making progress in the game world. User evaluations with patients under pediatric supervision revealed that the use of mobile technology in combination with web-based elements is feasible but some assumptions made about how users would connect to the platform were not satisfied in reality, resulting in less than optimal user experiences. We discuss challenges with suggestions for further development of integrated pervasive coaching and gamification platforms in medical practice.

  7. Farm Management Support on Cloud Computing Platform: A System for Cropland Monitoring Using Multi-Source Remotely Sensed Data

    Science.gov (United States)

    Coburn, C. A.; Qin, Y.; Zhang, J.; Staenz, K.

    2015-12-01

    Food security is one of the most pressing issues facing humankind. Recent estimates predict that over one billion people don't have enough food to meet their basic nutritional needs. The ability of remote sensing tools to monitor and model crop production and predict crop yield is essential for providing governments and farmers with vital information to ensure food security. Google Earth Engine (GEE) is a cloud computing platform, which integrates storage and processing algorithms for massive remotely sensed imagery and vector data sets. By providing the capabilities of storing and analyzing the data sets, it provides an ideal platform for the development of advanced analytic tools for extracting key variables used in regional and national food security systems. With the high performance computing and storing capabilities of GEE, a cloud-computing based system for near real-time crop land monitoring was developed using multi-source remotely sensed data over large areas. The system is able to process and visualize the MODIS time series NDVI profile in conjunction with Landsat 8 image segmentation for crop monitoring. With multi-temporal Landsat 8 imagery, the crop fields are extracted using the image segmentation algorithm developed by Baatz et al.[1]. The MODIS time series NDVI data are modeled by TIMESAT [2], a software package developed for analyzing time series of satellite data. The seasonality of MODIS time series data, for example, the start date of the growing season, length of growing season, and NDVI peak at a field-level are obtained for evaluating the crop-growth conditions. The system fuses MODIS time series NDVI data and Landsat 8 imagery to provide information of near real-time crop-growth conditions through the visualization of MODIS NDVI time series and comparison of multi-year NDVI profiles. Stakeholders, i.e., farmers and government officers, are able to obtain crop-growth information at crop-field level online. This unique utilization of GEE in

  8. Multi-platform operational validation of the Western Mediterranean SOCIB forecasting system

    Science.gov (United States)

    Juza, Mélanie; Mourre, Baptiste; Renault, Lionel; Tintoré, Joaquin

    2014-05-01

    The development of science-based ocean forecasting systems at global, regional, and local scales can support a better management of the marine environment (maritime security, environmental and resources protection, maritime and commercial operations, tourism, ...). In this context, SOCIB (the Balearic Islands Coastal Observing and Forecasting System, www.socib.es) has developed an operational ocean forecasting system in the Western Mediterranean Sea (WMOP). WMOP uses a regional configuration of the Regional Ocean Modelling System (ROMS, Shchepetkin and McWilliams, 2005) nested in the larger scale Mediterranean Forecasting System (MFS) with a spatial resolution of 1.5-2km. WMOP aims at reproducing both the basin-scale ocean circulation and the mesoscale variability which is known to play a crucial role due to its strong interaction with the large scale circulation in this region. An operational validation system has been developed to systematically assess the model outputs at daily, monthly and seasonal time scales. Multi-platform observations are used for this validation, including satellite products (Sea Surface Temperature, Sea Level Anomaly), in situ measurements (from gliders, Argo floats, drifters and fixed moorings) and High-Frequency radar data. The validation procedures allow to monitor and certify the general realism of the daily production of the ocean forecasting system before its distribution to users. Additionally, different indicators (Sea Surface Temperature and Salinity, Eddy Kinetic Energy, Mixed Layer Depth, Heat Content, transports in key sections) are computed every day both at the basin-scale and in several sub-regions (Alboran Sea, Balearic Sea, Gulf of Lion). The daily forecasts, validation diagnostics and indicators from the operational model over the last months are available at www.socib.es.

  9. [The Design Requirements for an E-Health Management Platform: Addressing the Needs of Adolescent Girls at High Risk of Metabolic Syndrome].

    Science.gov (United States)

    Su, Mei-Chen; Chen, Wen-Chin; Liu, Chieh-Yu; Jou, Hei-Jen; Hsiao, Ya-Chu; Tsao, Lee-Ing

    2015-10-01

    The rising prevalence of metabolic syndrome among adolescents has not been effectively addressed by current campus-based health promotions. Using the Internet in these promotions may help health professionals achieve better healthcare management. The purpose of the present study was to explore the design requirements of an e-health management platform from the subjective perspective of adolescent girls who were at a high risk of metabolic syndrome. The findings may provide a reference for designing nursing interventions that more effectively promote healthly lifestyle habits to adolescents. This qualitative study employed a snowball approach and used a semi-structured interview guide to collect data. A total of 20 Taiwanese adolescent females who were at a high risk of metabolic syndrome, aged 16-20 years, able to speak Mandarin or Taiwanese, and willing to participate and to have their sessions tape-recorded were enrolled as participants and engaged individually in in-depth interviews. The constant comparative method was used to inductively analyze the interview data. Five main themes related to the e-health management platform emerged from the data. These themes included: an attractive and user-friendly website interface, access to reliable information and resources, provision of tailored health information, access to peer support, and self-monitoring and learning tools. The findings highlight the key design needs of an e-Health management platform from the perspective of adolescent girls who are at a high risk of metabolic syndrome. The identified themes may be addressed in future revisions / developments of these platforms in order to better address the needs of this vulnerable population and to effectively reduce the incidence of metabolic syndrome. The authors hope that the results of the present study may be used to provide better healthcare and support for adolescent girls with metabolic syndrome.

  10. Middleware Platform Management based on Portable Interceptors

    NARCIS (Netherlands)

    Kath, O.; van Halteren, Aart; Stoinski, F.; Wegdam, M.; Fisher, M.; Ambler, A.; Calo, S.B.; Kar, G.

    2000-01-01

    Object middleware is an enabling technology for distributed applications that are required to operate in heterogeneous computing and communication environments. Although hiding distribution aspects to application designers proves beneficial, in an operational environment system managers may need

  11. On the High Altitude Platform (HAP W-CDMA System Capacity

    Directory of Open Access Journals (Sweden)

    L. de Haro-Ariet

    2004-06-01

    Full Text Available The performance of a downlink power control model, based on a n-thpower distance law, is evaluated for high altitude platform station(HAPS W-CDMA systems. The downlink capacity using this model iscompared with the uplink capacity. It is shown that the uplink capacityis higher than the downlink capacity.

  12. Experience using EPICS on PC platforms

    International Nuclear Information System (INIS)

    Hill, J.O.; Kasemire, K.U.

    1997-03-01

    The Experimental Physics and Industrial Control System (EPICS) has been widely adopted in the accelerator community. Although EPICS is available on many platforms, the majority of implementations have used UNIX workstations as clients, and VME- or VXI-based processors for distributed input output controllers. Recently, a significant portion of EPICS has been ported to personal computer (PC) hardware platforms running Microsoft's operating systems, and also Wind River System's real time vxWorks operating system. This development should significantly reduce the cost of deploying EPICS systems, and the prospect of using EPICS together with the many high quality commercial components available for PC platforms is also encouraging. A hybrid system using both PC and traditional platforms is currently being implemented at LANL for LEDA, the low energy demonstration accelerator under construction as part of the Accelerator Production of Tritium (APT) project. To illustrate these developments the authors compare their recent experience deploying a PC-based EPICS system with experience deploying similar systems based on traditional (UNIX-hosted) EPICS hardware and software platforms

  13. SOSPO-SP: Secure Operation of Sustainable Power Systems Simulation Platform for Real-Time System State Evaluation and Control

    DEFF Research Database (Denmark)

    Morais, Hugo; Vancraeyveld, Pieter; Pedersen, Allan Henning Birger

    2014-01-01

    Measurement Units (PMUs) provides more information and enables wide-area monitoring with accurate timing. One of the challenges in the near future is converting the high quantity and quality of information provided by PMUs into useful knowledge about operational state of a global system. The use of real-time...... simulation in closed-loop is essential to develop and validate new real-time applications of wide-area PMU data. This paper presents a simulation platform developed within the research project Secure Operation of Sustainable Power Systems (SOSPO). The SOSPO simulation platform (SOSPO-SP) functions...... in a closed-loop, integrating new real-time assessment methods to provide useful information to operators in power system control centers and to develop new control methodologies that handle emergency situations and avoid power system blackouts....

  14. System for beaming power from earth to a high altitude platform

    Science.gov (United States)

    Friedman, Herbert W.; Porter, Terry J.

    2002-01-01

    Power is transmitted to a high altitude platform by an array of diode pumped solid state lasers each operated at a single range of laser wavelengths outside of infrared and without using adaptive optics. Each laser produces a beam with a desired arrival spot size. An aircraft avoidance system uses a radar system for automatic control of the shutters of the lasers.

  15. Development of jacket platform tsunami risk rating system in waters offshore North Borneo

    Science.gov (United States)

    Lee, H. E.; Liew, M. S.; Mardi, N. H.; Na, K. L.; Toloue, Iraj; Wong, S. K.

    2016-09-01

    This work details the simulation of tsunami waves generated by seaquakes in the Manila Trench and their effect on fixed oil and gas jacket platforms in waters offshore North Borneo. For this study, a four-leg living quarter jacket platform located in a water depth of 63m is modelled in SACS v5.3. Malaysia has traditionally been perceived to be safe from the hazards of earthquakes and tsunamis. Local design practices tend to neglect tsunami waves and include no such provisions. In 2004, a 9.3 M w seaquake occurred off the northwest coast of Aceh, which generated tsunami waves that caused destruction in Malaysia totalling US 25 million and 68 deaths. This event prompted an awareness of the need to study the reliability of fixed offshore platforms scattered throughout Malaysian waters. In this paper, we present a review of research on the seismicity of the Manila Trench, which is perceived to be high risk for Southeast Asia. From the tsunami numerical model TUNA-M2, we extract computer-simulated tsunami waves at prescribed grid points in the vicinity of the platforms in the region. Using wave heights as input, we simulate the tsunami using SACS v5.3 structural analysis software of offshore platforms, which is widely accepted by the industry. We employ the nonlinear solitary wave theory in our tsunami loading calculations for the platforms, and formulate a platform-specific risk quantification system. We then perform an intensive structural sensitivity analysis and derive a corresponding platform-specific risk rating model.

  16. FUZZY CONTROLLER FOR THE CONTROL OF THE MOBILE PLATFORM OF THE CORBYS ROBOTIC GAIT REHABILITATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Maria Kyrarini

    2014-12-01

    Full Text Available In this paper, an inverse kinematics based control algorithm for the joystick control of the mobile platform of the novel mobile robot-assisted gait rehabilitation system CORBYS is presented. The mobile platform has four independently steered and driven wheels. Given the linear and angular velocities of the mobile platform, the inverse kinematics algorithm gives as its output the steering angle and the driving angular velocity of each of the four wheels. The paper is focused on the steering control of the platform for which a fuzzy logic controller is developed and implemented. The experimental results of the real-world steering of the platform are presented in the paper.

  17. MycoCAP - Mycobacterium Comparative Analysis Platform.

    Science.gov (United States)

    Choo, Siew Woh; Ang, Mia Yang; Dutta, Avirup; Tan, Shi Yang; Siow, Cheuk Chuen; Heydari, Hamed; Mutha, Naresh V R; Wee, Wei Yee; Wong, Guat Jah

    2015-12-15

    Mycobacterium spp. are renowned for being the causative agent of diseases like leprosy, Buruli ulcer and tuberculosis in human beings. With more and more mycobacterial genomes being sequenced, any knowledge generated from comparative genomic analysis would provide better insights into the biology, evolution, phylogeny and pathogenicity of this genus, thus helping in better management of diseases caused by Mycobacterium spp.With this motivation, we constructed MycoCAP, a new comparative analysis platform dedicated to the important genus Mycobacterium. This platform currently provides information of 2108 genome sequences of at least 55 Mycobacterium spp. A number of intuitive web-based tools have been integrated in MycoCAP particularly for comparative analysis including the PGC tool for comparison between two genomes, PathoProT for comparing the virulence genes among the Mycobacterium strains and the SuperClassification tool for the phylogenic classification of the Mycobacterium strains and a specialized classification system for strains of Mycobacterium abscessus. We hope the broad range of functions and easy-to-use tools provided in MycoCAP makes it an invaluable analysis platform to speed up the research discovery on mycobacteria for researchers. Database URL: http://mycobacterium.um.edu.my.

  18. Platform for Modeling and Simulation of Photovoltaic Generation Systems

    Directory of Open Access Journals (Sweden)

    Anny A. Arroyave-Berrio

    2013-11-01

    Full Text Available A platform for modeling and simulation using Matlab is presented. The platform has four models of photovoltaic panels. It identifies the parameters of each one, for a given solar panel, based on experimental data of voltage, current and environmental conditions. Also the platform generates four blocks, for using in Matlab-Simulink and Psim simulation tools. The experimental validation of the platform was made using the PV panels of the Metropolitan Technological Institute (ITM Lab.

  19. Pre-Service Teachers' Lived Experiences with Taking Courses through Learning Management Systems: A Qualitative Study

    Science.gov (United States)

    Ergul Sonmez, Esra; Koc, Mustafa

    2018-01-01

    Learning management systems (LMS) are web-based platforms used for enhancing and supporting classroom teaching or delivering online instruction. Much of the earlier research has focused on their technological features and implementations into instruction. However, investigating what and how teachers and students think about and experience with LMS…

  20. Development of a rule-based diagnostic platform on an object-oriented expert system shell

    International Nuclear Information System (INIS)

    Wang, Wenlin; Yang, Ming; Seong, Poong Hyun

    2016-01-01

    Highlights: • Multilevel Flow Model represents system knowledge as a domain map in expert system. • Rule-based fault diagnostic expert system can identify root cause via a causal chain. • Rule-based fault diagnostic expert system can be used for fault simulation training. - Abstract: This paper presents the development and implementation of a real-time rule-based diagnostic platform. The knowledge is acquired from domain experts and textbooks and the design of the fault diagnosis expert system was performed in the following ways: (i) establishing of corresponding classes and instances to build the domain map, (ii) creating of generic fault models based on events, and (iii) building of diagnostic reasoning based on rules. Knowledge representation is a complicated issue of expert systems. One highlight of this paper is that the Multilevel Flow Model has been used to represent the knowledge, which composes the domain map within the expert system as well as providing a concise description of the system. The developed platform is illustrated using the pressure safety system of a pressurized water reactor as an example of the simulation test bed; the platform is developed using the commercial and industrially validated software G2. The emulation test was conducted and it has been proven that the fault diagnosis expert system can identify the faults correctly and in a timely way; this system can be used as a simulation-based training tool to assist operators to make better decisions.

  1. System design of blood supply chain management based on Supplier Customer Relationship Management (SCRM approach

    Directory of Open Access Journals (Sweden)

    Allamsyah Zuhdi

    2018-01-01

    Full Text Available Blood supply chain management is very complex system. By considering blood’s demand that characterized as stochastic, therefore information and communication among stakeholders are considered as important cycle in supply chain. This research is objected to design interactive communication model based on information technology with android as platform to create effective customer-supplier relationship to support Customer Relationship Management or better known as CRM. The methods that suggested in designing its information system are Quality Function Deployment (QFD approach, Kano Model and Morphological Chart. From mentioned methods, attributes of design and specification priorities of purposed android system technology design are established. Attributes of design will be adjusted with customers’ requirements derived from customer voice that will further be integrated with technical responds in QFD. Technical responds will provide priorities on each design’s attribute of android information system and will be forwarded to the specifications determination by using morphological chart. Later, work flow of design system will be generated by using Data Flow Diagram (DFD. The result of the research will demonstrate the design of information system technology based on android that already adjusted with the requirement of donors as means of communication between suppliers and customers in blood supply chain.

  2. Customer behavior relative to gap between platform and train : final report, July 2009.

    Science.gov (United States)

    2009-07-01

    Managing gap safety at the train platform interface has been an on-going concern for passenger : rail systems. The major questions this research seeks to answer are what customer behaviors are : associated with the risk of gap injury incidents and wh...

  3. Design and Implementation of a Microgrid Energy Management System

    Directory of Open Access Journals (Sweden)

    Eun-Kyu Lee

    2016-11-01

    Full Text Available A microgrid is characterized by the integration of distributed energy resources and controllable loads in a power distribution network. Such integration introduces new, unique challenges to microgrid management that have never been exposed to traditional power systems. To accommodate these challenges, it is necessary to redesign a conventional Energy Management System (EMS so that it can cope with intrinsic characteristics of microgrids. While many projects have shown excellent research outcomes, they have either tackled portions of the characteristics or validated their EMSs only via simulations. This paper proposes a Microgrid Platform (MP, an advanced EMS for efficient microgrid operations. We design the MP by taking into consideration (i all the functional requirements of a microgrid EMS (i.e., optimization, forecast, human–machine interface, and data analysis and (ii engineering challenges (i.e., interoperability, extensibility, and flexibility. Moreover, a prototype system is developed and deployed in two smart grid testbeds: UCLA Smart Grid Energy Research Center and Korea Institute of Energy Research. We then conduct experiments to verify the feasibility of the MP design in real-world settings. Our testbeds and experiments demonstrate that the MP is able to communicate with various energy devices and to perform an energy management task efficiently.

  4. IVSPlat 1.0: an integrated virtual screening platform with a molecular graphical interface.

    Science.gov (United States)

    Sun, Yin Xue; Huang, Yan Xin; Li, Feng Li; Wang, Hong Yan; Fan, Cong; Bao, Yong Li; Sun, Lu Guo; Ma, Zhi Qiang; Kong, Jun; Li, Yu Xin

    2012-01-05

    The virtual screening (VS) of lead compounds using molecular docking and pharmacophore detection is now an important tool in drug discovery. VS tasks typically require a combination of several software tools and a molecular graphics system. Thus, the integration of all the requisite tools in a single operating environment could reduce the complexity of running VS experiments. However, only a few freely available integrated software platforms have been developed. A free open-source platform, IVSPlat 1.0, was developed in this study for the management and automation of VS tasks. We integrated several VS-related programs into a molecular graphics system to provide a comprehensive platform for the solution of VS tasks based on molecular docking, pharmacophore detection, and a combination of both methods. This tool can be used to visualize intermediate and final results of the VS execution, while also providing a clustering tool for the analysis of VS results. A case study was conducted to demonstrate the applicability of this platform. IVSPlat 1.0 provides a plug-in-based solution for the management, automation, and visualization of VS tasks. IVSPlat 1.0 is an open framework that allows the integration of extra software to extend its functionality and modified versions can be freely distributed. The open source code and documentation are available at http://kyc.nenu.edu.cn/IVSPlat/.

  5. [Orange Platform].

    Science.gov (United States)

    Toba, Kenji

    2017-07-01

    The Organized Registration for the Assessment of dementia on Nationwide General consortium toward Effective treatment in Japan (ORANGE platform) is a recently established nationwide clinical registry for dementia. This platform consists of multiple registries of patients with dementia stratified by the following clinical stages: preclinical, mild cognitive impairment, early-stage, and advanced-stage dementia. Patients will be examined in a super-longitudinal fashion, and their lifestyle, social background, genetic risk factors, and required care process will be assessed. This project is also notable because the care registry includes information on the successful, comprehensive management of patients with dementia. Therefore, this multicenter prospective cohort study will contribute participants to all clinical trials for Alzheimer's disease as well as improve the understanding of individuals with dementia.

  6. A Short Survey on the State of the Art in Architectures and Platforms for Large Scale Data Analysis and Knowledge Discovery from Data

    Energy Technology Data Exchange (ETDEWEB)

    Begoli, Edmon [ORNL

    2012-01-01

    Intended as a survey for practicing architects and researchers seeking an overview of the state-of-the-art architectures for data analysis, this paper provides an overview of the emerg- ing data management and analytic platforms including par- allel databases, Hadoop-based systems, High Performance Computing (HPC) platforms and platforms popularly re- ferred to as NoSQL platforms. Platforms are presented based on their relevance, analysis they support and the data organization model they support.

  7. Engaging older people in an internet platform for cardiovascular risk self-management: a qualitative study among Dutch HATICE participants

    NARCIS (Netherlands)

    van Middelaar, Tessa; Beishuizen, Cathrien R. L.; Guillemont, Juliette; Barbera, Mariagnese; Richard, Edo; Moll van Charante, Eric P.; van Gool, Willem A.; Soininen, Hilkka; Kivipelto, Miia; Andrieu, Sandrine; Brayne, Carol; Jongstra, Susan; van Wanrooij, Lennard L.; Hoevenaar-Blom, Marieke P.; Ngandu, Tiia; Mangialasche, Francesca; Coley, Nicola; Meiller, Yannick; van de Groep, Bram

    2018-01-01

    To study older peoples' experiences with an interactive internet platform for cardiovascular self-management, to assess which factors influence initial and sustained engagement. To assess their views on future use within primary care. Qualitative semistructured interview study, with thematic

  8. Engaging older people in an internet platform for cardiovascular risk self-management: a qualitative study among Dutch HATICE participants

    NARCIS (Netherlands)

    Middelaar, T. van; Beishuizen, C.R.; Guillemont, J.; Barbera, M.; Richard, E.; Charante, E.P.M. van

    2018-01-01

    OBJECTIVES: To study older peoples' experiences with an interactive internet platform for cardiovascular self-management, to assess which factors influence initial and sustained engagement. To assess their views on future use within primary care. DESIGN: Qualitative semistructured interview study,

  9. Body surface posture evaluation: construction, validation and protocol of the SPGAP system (Posture evaluation rotating platform system).

    Science.gov (United States)

    Schwertner, Debora Soccal; Oliveira, Raul; Mazo, Giovana Zarpellon; Gioda, Fabiane Rosa; Kelber, Christian Roberto; Swarowsky, Alessandra

    2016-05-04

    Several posture evaluation devices have been used to detect deviations of the vertebral column. However it has been observed that the instruments present measurement errors related to the equipment, environment or measurement protocol. This study aimed to build, validate, analyze the reliability and describe a measurement protocol for the use of the Posture Evaluation Rotating Platform System (SPGAP, Brazilian abbreviation). The posture evaluation system comprises a Posture Evaluation Rotating Platform, video camera, calibration support and measurement software. Two pilot studies were carried out with 102 elderly individuals (average age 69 years old, SD = ±7.3) to establish a protocol for SPGAP, controlling the measurement errors related to the environment, equipment and the person under evaluation. Content validation was completed with input from judges with expertise in posture measurement. The variation coefficient method was used to validate the measurement by the instrument of an object with known dimensions. Finally, reliability was established using repeated measurements of the known object. Expert content judges gave the system excellent ratings for content validity (mean 9.4 out of 10; SD 1.13). The measurement of an object with known dimensions indicated excellent validity (all measurement errors reality. To verify the images of objects with known dimensions the values for the width and height were, respectively, CV 0.88 (width) and 2.33 (height), SD 0.22 (width) and 0.35 (height), minimum and maximum values 24.83-25.2 (width) and 14.56 - 15.75 (height). In the analysis of different images (similar) of an individual, greater discrepancies were observed in the values found. The cervical index, for example, presented minimum and maximum values of 15.38 and 37.5, a coefficient of variation of 0.29 and a standard deviation of 6.78. The SPGAP was shown to be a valid and reliable instrument for the quantitative analysis of body posture with applicability and

  10. A computational platform for modeling and simulation of pipeline georeferencing systems

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, A.G.; Pellanda, P.C.; Gois, J.A. [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil); Roquette, P.; Pinto, M.; Durao, R. [Instituto de Pesquisas da Marinha (IPqM), Rio de Janeiro, RJ (Brazil); Silva, M.S.V.; Martins, W.F.; Camillo, L.M.; Sacsa, R.P.; Madeira, B. [Ministerio de Ciencia e Tecnologia (CT-PETRO2006MCT), Brasilia, DF (Brazil). Financiadora de Estudos e Projetos (FINEP). Plano Nacional de Ciencia e Tecnologia do Setor Petroleo e Gas Natural

    2009-07-01

    This work presents a computational platform for modeling and simulation of pipeline geo referencing systems, which was developed based on typical pipeline characteristics, on the dynamical modeling of Pipeline Inspection Gauge (PIG) and on the analysis and implementation of an inertial navigation algorithm. The software environment of PIG trajectory simulation and navigation allows the user, through a friendly interface, to carry-out evaluation tests of the inertial navigation system under different scenarios. Therefore, it is possible to define the required specifications of the pipeline geo referencing system components, such as: required precision of inertial sensors, characteristics of the navigation auxiliary system (GPS surveyed control points, odometers etc.), pipeline construction information to be considered in order to improve the trajectory estimation precision, and the signal processing techniques more suitable for the treatment of inertial sensors data. The simulation results are analyzed through the evaluation of several performance metrics usually considered in inertial navigation applications, and 2D and 3D plots of trajectory estimation error and of recovered trajectory in the three coordinates are made available to the user. This paper presents the simulation platform and its constituting modules and defines their functional characteristics and interrelationships.(author)

  11. March of the Robo-advisors : The potential for global expansion of digital asset management platforms

    OpenAIRE

    Rättyä, Jere

    2016-01-01

    This thesis looks into the robo-advisory market in the U.S. and Europe, with the goal of determining the international potential for a Finnish robo-advisor service and inspecting the interest of foreign service providers in the Finnish market. Fintech is becoming increasingly disruptive for the traditional and conservative financial sector, which has resulted in start-ups building their own robo-advisor platform around the world. Traditional wealth management is both expensive and exclusi...

  12. Learning to manage quality in a multiple reservoir system ...

    African Journals Online (AJOL)

    The development of water policies based on integrated water management principles promotes the development of multistakeholder platforms to manage water resources at catchment level. This is the case of the Alto-Tietê watershed, the urban catchment encompassing the São Paulo metropolis in Brazil. The dynamic ...

  13. On the Use of Extended TAM to Assess Students' Acceptance and Intent to Use Third-Generation Learning Management Systems

    Science.gov (United States)

    Ros, Salvador; Hernández, Roberto; Caminero, Agustín; Robles, Antonio; Barbero, Isabel; Maciá, Araceli; Holgado, Francisco Pablo

    2015-01-01

    Service-oriented e-learning platforms can be considered as a third generation of learning management systems (LMSs). As opposed to the previous generations, consisting of ad hoc solutions and traditional LMS, this new technology contemplates e-learning systems as services that can be integrated into different learning scenarios. This paper shows…

  14. Development of an IHE MRRT-compliant open-source web-based reporting platform

    Energy Technology Data Exchange (ETDEWEB)

    Pinto dos Santos, Daniel; Klos, G.; Kloeckner, R.; Oberle, R.; Dueber, C.; Mildenberger, P. [University Medical Center of the Johannes Gutenberg-University Mainz, Department of Diagnostic and Interventional Radiology, Mainz (Germany)

    2017-01-15

    To develop a platform that uses structured reporting templates according to the IHE Management of Radiology Report Templates (MRRT) profile, and to implement this platform into clinical routine. The reporting platform uses standard web technologies (HTML / JavaScript and PHP / MySQL) only. Several freely available external libraries were used to simplify the programming. The platform runs on a standard web server, connects with the radiology information system (RIS) and PACS, and is easily accessible via a standard web browser. A prototype platform that allows structured reporting to be easily incorporated into the clinical routine was developed and successfully tested. To date, 797 reports were generated using IHE MRRT-compliant templates (many of them downloaded from the RSNA's radreport.org website). Reports are stored in a MySQL database and are easily accessible for further analyses. Development of an IHE MRRT-compliant platform for structured reporting is feasible using only standard web technologies. All source code will be made available upon request under a free license, and the participation of other institutions in further development is welcome. (orig.)

  15. Development of an IHE MRRT-compliant open-source web-based reporting platform

    International Nuclear Information System (INIS)

    Pinto dos Santos, Daniel; Klos, G.; Kloeckner, R.; Oberle, R.; Dueber, C.; Mildenberger, P.

    2017-01-01

    To develop a platform that uses structured reporting templates according to the IHE Management of Radiology Report Templates (MRRT) profile, and to implement this platform into clinical routine. The reporting platform uses standard web technologies (HTML / JavaScript and PHP / MySQL) only. Several freely available external libraries were used to simplify the programming. The platform runs on a standard web server, connects with the radiology information system (RIS) and PACS, and is easily accessible via a standard web browser. A prototype platform that allows structured reporting to be easily incorporated into the clinical routine was developed and successfully tested. To date, 797 reports were generated using IHE MRRT-compliant templates (many of them downloaded from the RSNA's radreport.org website). Reports are stored in a MySQL database and are easily accessible for further analyses. Development of an IHE MRRT-compliant platform for structured reporting is feasible using only standard web technologies. All source code will be made available upon request under a free license, and the participation of other institutions in further development is welcome. (orig.)

  16. Nuclear platform research and development - 2008-09 highlights

    International Nuclear Information System (INIS)

    Sadhankar, R.R.

    2009-08-01

    The Nuclear Platform R and D Program has lead responsibility for the maintenance and further development of the CANDU intellectual property covering the safety, licensing and design basis for nuclear facilities. The Nuclear Platform R and D Program is part of the Research and Technology Operation (RTO) unit of AECL and is managed through the Research and Development division, which has responsibility for maintaining and enhancing the knowledge and technology base. The RTO is also responsible for managing AECL's nuclear facilities and infrastructure (including laboratories and R and D facilities), the nuclear waste management program and other legacy liabilities (e.g., decommissioning) to demonstrate and grow shareholder value. The Nuclear Platform also provides the technology base from which new products and services can be developed to meet customer needs (including ACR and commercial products and services). (author)

  17. Energy management systems in the practice. ISO 50001. A guideline for companies and institutions; Energiemanagementsysteme in der Praxis. ISO 50001. Leitfaden fuer Unternehmen und Organisationen

    Energy Technology Data Exchange (ETDEWEB)

    Kohlenborn, Walter; Kabisch, Sibylle; Klein, Johanna; Richter, Ina; Schuermann, Silas

    2012-06-15

    The guideline under consideration is an updated version of the guideline to the regulation EN 16001 and amended to ISO 50001. This contribution supports institutes in the implementation of an energy management system according to ISO 50001. The differences and commonalities to the European environment management system EMAS as well as to the regulation ISO 14001 are described. EMAS certified companies fulfil regularly all conditions of an energy management system. A practised energy management system is an excellent platform for the implementation of EMAS.

  18. Balancing Energy and Performance in Dense Linear System Solvers for Hybrid ARM+GPU platforms

    Directory of Open Access Journals (Sweden)

    Juan P. Silva

    2016-04-01

    Full Text Available The high performance computing community has traditionally focused uniquely on the reduction of execution time, though in the last years, the optimization of energy consumption has become a main issue. A reduction of energy usage without a degradation of performance requires the adoption of energy-efficient hardware platforms accompanied by the development of energy-aware algorithms and computational kernels. The solution of linear systems is a key operation for many scientific and engineering problems. Its relevance has motivated an important amount of work, and consequently, it is possible to find high performance solvers for a wide variety of hardware platforms. In this work, we aim to develop a high performance and energy-efficient linear system solver. In particular, we develop two solvers for a low-power CPU-GPU platform, the NVIDIA Jetson TK1. These solvers implement the Gauss-Huard algorithm yielding an efficient usage of the target hardware as well as an efficient memory access. The experimental evaluation shows that the novel proposal reports important savings in both time and energy-consumption when compared with the state-of-the-art solvers of the platform.

  19. An open-access platform for camera-trapping data

    Directory of Open Access Journals (Sweden)

    Mario César Lavariega

    2018-02-01

    Full Text Available In southern Mexico, local communities have been playing important roles in the design and collection of wildlife data through camera-trapping in community-based monitoring of biodiversity projects. However, the methods used to store the data have limited their use in matters of decision-making and research. Thus, we present the Platform for Community-based Monitoring of Biodiversity (PCMB, a repository, which allows storage, visualization, and downloading of photographs captured by community-based monitoring of biodiversity projects in protected areas of southern Mexico. The platform was developed using agile software development with extensive interaction between computer scientists and biologists. System development included gathering data, design, built, database and attributes creation, and quality control. The PCMB currently contains 28,180 images of 6478 animals (69.4% mammals and 30.3% birds. Of the 32 species of mammals recorded in 18 PA since 2012, approximately a quarter of all photographs were of white-tailed deer (Odocoileus virginianus. Platforms permitting access to camera-trapping data are a valuable step in opening access to data of biodiversity; the PCMB is a practical new tool for wildlife management and research with data generated through local participation. Thus, this work encourages research on the data generated through the community-based monitoring of biodiversity projects in protected areas, to provide an important information infrastructure for effective management and conservation of wildlife.

  20. LBS Mobile Learning System Based on Android Platform

    Directory of Open Access Journals (Sweden)

    Zhang Ya-Li

    2017-01-01

    Full Text Available In the era of mobile internet, PC-end internet services can no long satisfy people’s demands, needs for App and services on mobile phones are more urgent than ever. With increasing social competition, the concept of lifelong learning becomes more and more popular and accepted, making full use of spare time to learn at any time and any place meets updating knowledge desires of modern people, Location Based System (LBS mobile learning system based on Android platform was created under such background. In this Paper, characteristics of mobile location technology and intelligent terminal were introduced and analyzed, mobile learning system which will fulfill personalized needs of mobile learners was designed and developed on basis of location information, mobile learning can be greatly promoted and new research ideas can be expanded for mobile learning.

  1. Web platform using digital image processing and geographic information system tools: a Brazilian case study on dengue.

    Science.gov (United States)

    Brasil, Lourdes M; Gomes, Marília M F; Miosso, Cristiano J; da Silva, Marlete M; Amvame-Nze, Georges D

    2015-07-16

    the following steps: i. Obtain images from the eggs on an ovitrap's cardboards, with a microscope. ii. Apply a proposed image-processing-based semi-automatic counting system. The system we developed uses the Java programming language and the Java Server Faces technology. This is a framework suite for web applications development. This approach will allow a simple migration to any Operating System platform and future applications on mobile devices. iii. Collect and store all data into a Database (DB) and then georeference them in a GIS. The Database Management System used to develop the DB is based on PostgreSQL. The GIS will assist in the visualization and spatial analysis of digital maps, allowing the location of Dengue outbreaks in the region of study. This will also facilitate the planning, analysis, and evaluation of temporal and spatial epidemiology, as required by the Brazilian Health Care Control Center. iv. Deploy the SCSA-WEB, DB and GIS on a single Web platform. The statistical results obtained by DIP were satisfactory when compared with the SCSA-WEB's semi-automated eggs count. The results also indicate that the time spent in manual counting has being considerably reduced when using our fully automated DIP algorithm and semi-automated SCSA-WEB. The developed georeferencing Web platform proves to be of great support for future visualization with statistical and trace analysis of the disease. The analyses suggest the efficiency of our algorithm for automatic eggs counting, in terms of expediting the work of the laboratory technician, reducing considerably its time and error counting rates. We believe that this kind of integrated platform and tools can simplify the decision making process of the Brazilian Health Care Control Center.

  2. The online Prescriptive Index platform for the assessment of managerial competencies and coaching needs: development and initial validation of the experience sampling Mood Wheel and the Manager-Rational and Irrational Beliefs Scale

    Directory of Open Access Journals (Sweden)

    David, O.A.

    2013-12-01

    Full Text Available The Prescriptive Index platform is dedicated to the appraisal and development of managerial competencies, and it is comprised of such measures as the multi-rater Freeman-Gavita Prescriptive Executive Coaching (PEC Assessment for assessing core managerial skills, and the multi-rater Managerial Coaching Assessment System (MCAS for the evaluation of coaching competencies in managers. The aim of this research was to present the development and psychometric properties of new tools, part of the Prescriptive Index platform, for the assessment of managerial emotional competencies: the web and mobile based Mood Wheel measure using experience sampling procedures, for the assessment of current/previous distress and positive emotions; and the self-report Manager Rational and Irrational Beliefs Scale (M-RIBS for the assessment of managerial attitudes involved in emotion-regulation processes. Results obtained show that both instruments integrated in the Prescriptive Index platform have adequate initial psychometric support and predictive validity. Practical implications of our findings are discussed in the light of the importance of enabling organizations to accurately identify managerial competencies and coaching needs.

  3. High Level of Integration in Integrated Disease Management Leads to Higher Usage in the e-Vita Study: Self-Management of Chronic Obstructive Pulmonary Disease With Web-Based Platforms in a Parallel Cohort Design.

    Science.gov (United States)

    Talboom-Kamp, Esther Pwa; Verdijk, Noortje A; Kasteleyn, Marise J; Harmans, Lara M; Talboom, Irvin Jsh; Numans, Mattijs E; Chavannes, Niels H

    2017-05-31

    Worldwide, nearly 3 million people die of chronic obstructive pulmonary disease (COPD) every year. Integrated disease management (IDM) improves disease-specific quality of life and exercise capacity for people with COPD, but can also reduce hospital admissions and hospital days. Self-management of COPD through eHealth interventions has shown to be an effective method to improve the quality and efficiency of IDM in several settings, but it remains unknown which factors influence usage of eHealth and change in behavior of patients. Our study, e-Vita COPD, compares different levels of integration of Web-based self-management platforms in IDM in three primary care settings. The main aim of this study is to analyze the factors that successfully promote the use of a self-management platform for COPD patients. The e-Vita COPD study compares three different approaches to incorporating eHealth via Web-based self-management platforms into IDM of COPD using a parallel cohort design. Three groups integrated the platforms to different levels. In groups 1 (high integration) and 2 (medium integration), randomization was performed to two levels of personal assistance for patients (high and low assistance); in group 3 there was no integration into disease management (none integration). Every visit to the e-Vita and Zorgdraad COPD Web platforms was tracked objectively by collecting log data (sessions and services). At the first log-in, patients completed a baseline questionnaire. Baseline characteristics were automatically extracted from the log files including age, gender, education level, scores on the Clinical COPD Questionnaire (CCQ), dyspnea scale (MRC), and quality of life questionnaire (EQ5D). To predict the use of the platforms, multiple linear regression analyses for the different independent variables were performed: integration in IDM (high, medium, none), personal assistance for the participants (high vs low), educational level, and self-efficacy level (General Self

  4. Design and Evaluation of a Pervasive Coaching and Gamification Platform for Young Diabetes Patients †

    Science.gov (United States)

    Klaassen, Randy; Bul, Kim C. M.; op den Akker, Rieks; van der Burg, Gert Jan; Di Bitonto, Pierpaolo

    2018-01-01

    Self monitoring, personal goal-setting and coaching, education and social support are strategies to help patients with chronic conditions in their daily care. Various tools have been developed, e.g., mobile digital coaching systems connected with wearable sensors, serious games and patient web portals to personal health records, that aim to support patients with chronic conditions and their caregivers in realizing the ideal of self-management. We describe a platform that integrates these tools to support young patients in diabetes self-management through educational game playing, monitoring and motivational feedback. We describe the design of the platform referring to principles from healthcare, persuasive system design and serious game design. The virtual coach is a game guide that can also provide personalized feedback about the user’s daily care related activities which have value for making progress in the game world. User evaluations with patients under pediatric supervision revealed that the use of mobile technology in combination with web-based elements is feasible but some assumptions made about how users would connect to the platform were not satisfied in reality, resulting in less than optimal user experiences. We discuss challenges with suggestions for further development of integrated pervasive coaching and gamification platforms in medical practice. PMID:29385750

  5. A Tactile Sensor Network System Using a Multiple Sensor Platform with a Dedicated CMOS-LSI for Robot Applications.

    Science.gov (United States)

    Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki; Bartley, Travis; Nonomura, Yutaka; Muroyama, Masanori

    2017-08-28

    Robot tactile sensation can enhance human-robot communication in terms of safety, reliability and accuracy. The final goal of our project is to widely cover a robot body with a large number of tactile sensors, which has significant advantages such as accurate object recognition, high sensitivity and high redundancy. In this study, we developed a multi-sensor system with dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) circuit chips (referred to as "sensor platform LSI") as a framework of a serial bus-based tactile sensor network system. The sensor platform LSI supports three types of sensors: an on-chip temperature sensor, off-chip capacitive and resistive tactile sensors, and communicates with a relay node via a bus line. The multi-sensor system was first constructed on a printed circuit board to evaluate basic functions of the sensor platform LSI, such as capacitance-to-digital and resistance-to-digital conversion. Then, two kinds of external sensors, nine sensors in total, were connected to two sensor platform LSIs, and temperature, capacitive and resistive sensing data were acquired simultaneously. Moreover, we fabricated flexible printed circuit cables to demonstrate the multi-sensor system with 15 sensor platform LSIs operating simultaneously, which showed a more realistic implementation in robots. In conclusion, the multi-sensor system with up to 15 sensor platform LSIs on a bus line supporting temperature, capacitive and resistive sensing was successfully demonstrated.

  6. Industry Platforms and New Industrial Policy in Russia

    OpenAIRE

    Svetlana V. Orekhova

    2017-01-01

    The article aims at clarifying Russian industrial policy as a result of business models changing and market reconstruction. The research bass on the hypothesis that the choice of the industrial policy administrative measures depends on the object of management. It is important to link government regulation of markets with corporate strategies. We reveal that modern economic systems based on using of electronic technologies, big data, and innovative activity. Technological platforms as the sin...

  7. Computer-operated analytical platform for the determination of nutrients in hydroponic systems.

    Science.gov (United States)

    Rius-Ruiz, F Xavier; Andrade, Francisco J; Riu, Jordi; Rius, F Xavier

    2014-03-15

    Hydroponics is a water, energy, space, and cost efficient system for growing plants in constrained spaces or land exhausted areas. Precise control of hydroponic nutrients is essential for growing healthy plants and producing high yields. In this article we report for the first time on a new computer-operated analytical platform which can be readily used for the determination of essential nutrients in hydroponic growing systems. The liquid-handling system uses inexpensive components (i.e., peristaltic pump and solenoid valves), which are discretely computer-operated to automatically condition, calibrate and clean a multi-probe of solid-contact ion-selective electrodes (ISEs). These ISEs, which are based on carbon nanotubes, offer high portability, robustness and easy maintenance and storage. With this new computer-operated analytical platform we performed automatic measurements of K(+), Ca(2+), NO3(-) and Cl(-) during tomato plants growth in order to assure optimal nutritional uptake and tomato production. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Design and Synchronization of Master-Slave Electronic Horizontal Platform System

    Directory of Open Access Journals (Sweden)

    Hang-Hong Kuo

    2012-01-01

    Full Text Available Horizontal platform system (HPS is one of the mechanical systems with rich behavior and has extensively been applied in offshore and earthquake engineering. A corresponding electronic HPS is proposed in this paper to reduce the research cost and time when studying dynamics of the mechanical HPS. Furthermore, an output feedback controller is proposed for global synchronization between coupled electronic HPS systems and its stability condition is also derived by employing the Lyapunov stability theory. The experimental simulations verify the dynamics of the proposed electronic HPS and the synchronization effectiveness of the proposed control scheme.

  9. Space Station Freedom electrical power system hardware commonality with the United States Polar Platform

    Science.gov (United States)

    Rieker, Lorra L.; Haraburda, Francis M.

    1989-01-01

    Information is presented on how the concept of commonality is being implemented with respect to electric power system hardware for the Space Station Freedom and the U.S. Polar Platform. Included is a historical account of the candidate common items which have the potential to serve the same power system functions on both Freedom and the Polar Platform. The Space Station program and objectives are described, focusing on the test and development responsibilities. The program definition and preliminary design phase and the design and development phase are discussed. The goal of this work is to reduce the program cost.

  10. Ocean Data Interoperability Platform (ODIP): using regional data systems for global ocean research

    Science.gov (United States)

    Schaap, D.; Thijsse, P.; Glaves, H.

    2017-12-01

    Ocean acidification, loss of coral reefs, sustainable exploitation of the marine environment are just a few of the challenges researchers around the world are currently attempting to understand and address. However, studies of these ecosystem level challenges are impossible unless researchers can discover and re-use the large volumes of interoperable multidisciplinary data that are currently only accessible through regional and global data systems that serve discreet, and often discipline specific, user communities. The plethora of marine data systems currently in existence are also using different standards, technologies and best practices making re-use of the data problematic for those engaged in interdisciplinary marine research. The Ocean Data Interoperability Platform (ODIP) is responding to this growing demand for discoverable, accessible and reusable data by establishing the foundations for a common global framework for marine data management. But creation of such an infrastructure is a major undertaking, and one that needs to be achieved in part by establishing different levels of interoperability across existing regional and global marine e-infrastructures. Workshops organised by ODIP II facilitate dialogue between selected regional and global marine data systems in an effort to identify potential solutions that integrate these marine e-infrastructures. The outcomes of these discussions have formed the basis for a number of prototype development tasks that aim to demonstrate effective sharing of data across multiple data systems, and allow users to access data from more than one system through a single access point. The ODIP II project is currently developing four prototype solutions that are establishing interoperability between selected regional marine data management infrastructures in Europe, the USA, Canada and Australia, and with the global POGO, IODE Ocean Data Portal (ODP) and GEOSS systems. The potential impact of implementing these solutions for

  11. ON-LINE PLATFORM FOR COMPETENCES DEVELOPMENT IN CORPORATE EDUCATIONAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    L. G. Andreeva

    2016-01-01

    Full Text Available The aim of the study is to present the model of interaction of university and business corporations in uniform information and educational space, which consists of the uniform requirements to the contents and quality of education and requirements of science; education and business are equally satisfied.Methods. The methods involve summing up the results of the national and international researchers’ findings on the problem of vocational pedagogical education; methods of expert survey and system analysis.Results. The information research results disclosing the drawbacks of the existing online-education technologies are presented. There is also a presentation of online-platform concept «The University of the 3rd Millennium» where modern university is considered as a service provider responsible for corporate education. Outsourcing will allow the companies to cut their expenses on employee education programs, while universities will accumulate additional resources by means of developing and selling innovative educational products. The additional funds will enable the university to carry out scientific research, to effectively implement post graduates’ employment programs, to introduce innovations.Scientific novelty. The authors define «as is» competences, which the university must have to launch this online-platform project, and «as to be» competences, which every university is to master to successfully implement the project. Internal high-risk systemic tensions and external challenges facing the platform are defined; strategic matrix of their intersection is developed. The latter allowed the authors to specify essential tasks which demand solution within the project. There is also a description of interconnection of the defined tasks with the «as to be» competences, and a Canvas model of the suggested online platform.Practical significance: The authors of the article propose the model of business and education interaction, within which

  12. A Novel System for Correction of Relative Angular Displacement between Airborne Platform and UAV in Target Localization

    Directory of Open Access Journals (Sweden)

    Chenglong Liu

    2017-03-01

    Full Text Available This paper provides a system and method for correction of relative angular displacements between an Unmanned Aerial Vehicle (UAV and its onboard strap-down photoelectric platform to improve localization accuracy. Because the angular displacements have an influence on the final accuracy, by attaching a measuring system to the platform, the texture image of platform base bulkhead can be collected in a real-time manner. Through the image registration, the displacement vector of the platform relative to its bulkhead can be calculated to further determine angular displacements. After being decomposed and superposed on the three attitude angles of the UAV, the angular displacements can reduce the coordinate transformation errors and thus improve the localization accuracy. Even a simple kind of method can improve the localization accuracy by 14.3%.

  13. Programmable Bio-nanochip Platform: A Point-of-Care Biosensor System with the Capacity To Learn.

    Science.gov (United States)

    McRae, Michael P; Simmons, Glennon; Wong, Jorge; McDevitt, John T

    2016-07-19

    The combination of point-of-care (POC) medical microdevices and machine learning has the potential transform the practice of medicine. In this area, scalable lab-on-a-chip (LOC) devices have many advantages over standard laboratory methods, including faster analysis, reduced cost, lower power consumption, and higher levels of integration and automation. Despite significant advances in LOC technologies over the years, several remaining obstacles are preventing clinical implementation and market penetration of these novel medical microdevices. Similarly, while machine learning has seen explosive growth in recent years and promises to shift the practice of medicine toward data-intensive and evidence-based decision making, its uptake has been hindered due to the lack of integration between clinical measurements and disease determinations. In this Account, we describe recent developments in the programmable bio-nanochip (p-BNC) system, a biosensor platform with the capacity for learning. The p-BNC is a "platform to digitize biology" in which small quantities of patient sample generate immunofluorescent signal on agarose bead sensors that is optically extracted and converted to antigen concentrations. The platform comprises disposable microfluidic cartridges, a portable analyzer, automated data analysis software, and intuitive mobile health interfaces. The single-use cartridges are fully integrated, self-contained microfluidic devices containing aqueous buffers conveniently embedded for POC use. A novel fluid delivery method was developed to provide accurate and repeatable flow rates via actuation of the cartridge's blister packs. A portable analyzer instrument was designed to integrate fluid delivery, optical detection, image analysis, and user interface, representing a universal system for acquiring, processing, and managing clinical data while overcoming many of the challenges facing the widespread clinical adoption of LOC technologies. We demonstrate the p

  14. System-Platforms-Based SystemC TLM Design of Image Processing Chains for Embedded Applications

    Directory of Open Access Journals (Sweden)

    Omar Hammami

    2007-08-01

    Full Text Available Intelligent vehicle design is a complex task which requires multidomains modeling and abstraction. Transaction-level modeling (TLM and component-based software development approaches accelerate the process of an embedded system design and simulation and hence improve the overall productivity. On the other hand, system-level design languages facilitate the fast hardware synthesis at behavioral level of abstraction. In this paper, we introduce an approach for hardware/software codesign of image processing applications targeted towards intelligent vehicle that uses platform-based SystemC TLM and component-based software design approaches along with HW synthesis using SystemC to accelerate system design and verification process. Our experiments show the effectiveness of our methodology.

  15. System-Platforms-Based SystemC TLM Design of Image Processing Chains for Embedded Applications

    Directory of Open Access Journals (Sweden)

    Lacassagne Lionel

    2007-01-01

    Full Text Available Intelligent vehicle design is a complex task which requires multidomains modeling and abstraction. Transaction-level modeling (TLM and component-based software development approaches accelerate the process of an embedded system design and simulation and hence improve the overall productivity. On the other hand, system-level design languages facilitate the fast hardware synthesis at behavioral level of abstraction. In this paper, we introduce an approach for hardware/software codesign of image processing applications targeted towards intelligent vehicle that uses platform-based SystemC TLM and component-based software design approaches along with HW synthesis using SystemC to accelerate system design and verification process. Our experiments show the effectiveness of our methodology.

  16. Applied architecture patterns on the Microsoft platform

    CERN Document Server

    Dovgal, Andre; Noriskin, Gregor

    2014-01-01

    Presented in a scenario-driven tutorial way, we lead you through fictitious example problems and present you with the best solutions. This book is intended for architects, developers, and managers who need to improve their knowledge of the Microsoft application platform. This book will appeal to anyone, especially consultants, who want to get up to speed on selecting the most appropriate platform for a particular problem. A good understanding of the general Windows platform and development technologies would be helpful.

  17. [Research and development of medical case database: a novel medical case information system integrating with biospecimen management].

    Science.gov (United States)

    Pan, Shiyang; Mu, Yuan; Wang, Hong; Wang, Tong; Huang, Peijun; Ma, Jianfeng; Jiang, Li; Zhang, Jie; Gu, Bing; Yi, Lujiang

    2010-04-01

    To meet the needs of management of medical case information and biospecimen simultaneously, we developed a novel medical case information system integrating with biospecimen management. The database established by MS SQL Server 2000 covered, basic information, clinical diagnosis, imaging diagnosis, pathological diagnosis and clinical treatment of patient; physicochemical property, inventory management and laboratory analysis of biospecimen; users log and data maintenance. The client application developed by Visual C++ 6.0 was used to implement medical case and biospecimen management, which was based on Client/Server model. This system can perform input, browse, inquest, summary of case and related biospecimen information, and can automatically synthesize case-records based on the database. Management of not only a long-term follow-up on individual, but also of grouped cases organized according to the aim of research can be achieved by the system. This system can improve the efficiency and quality of clinical researches while biospecimens are used coordinately. It realizes synthesized and dynamic management of medical case and biospecimen, which may be considered as a new management platform.

  18. Development of a multi-functional platform to perform the I and C system test, diagnosis and training

    International Nuclear Information System (INIS)

    Ren Chunxiang; Guan Yunquan; Wang Xingye

    2014-01-01

    The Safety I and C system of Tianwan Nuclear Power Station (TNPS) is implemented with the Class lE digital I and C platform TELEPERM XS (TXS). To satisfy the requirements of TXS system fault diagnosis, spare parts performance test as well as the staff maintenance skill training, through the study of operating environment and configuration characteristics of the online TXS system, and adequately absorb the experiences of the digital control device test systems which are applied in both domestic and abroad, developed and established a set of TXS system multifunctional platform which performs the TXS software/hardware testing, fault diagnosis and staff maintenance skill training. Practice has proved that the platform running well to perform the test of the TXS system hardware and software, fault diagnosis and the training tasks to ensure the reliable operation of the online safety I and C system, and shorten the maintenance cycle of online TXS system, improved the technical level of the Operation and maintenance personnel, it provides a reference for similar I and C systems of other nuclear power plants. (authors)

  19. An Integrated Platform for Dynamic Software Updating and its Application in Self-* systems

    DEFF Research Database (Denmark)

    Gregersen, Allan Raundahl; Jørgensen, Bo Nørregaard; Hadaytullah

    2012-01-01

    Practical dynamic updating of modern Java applications requires tool support to become an integral part of the software development and maintenance lifecycle. In this paper we present Javeleon, an easy-to-use tool for dynamic updates of Java applications. To support integration with specific...... frameworks, component systems and application servers, Javeleon currently provides tight integration with the NetBeans Platform, facilitating dynamic updating for applications built on top of the NetBeans Platform in an unconstrained manner. Javeleon supports state-preserving unanticipated runtime evolution...

  20. Environmental Management System

    Science.gov (United States)

    Goals Recycling Green Purchasing Pollution Prevention Reusing Water Resources Environmental Management Stewardship » Environmental Protection » Environmental Management System Environmental Management System An Environmental Management System is a systematic method for assessing mission activities, determining the

  1. Implementation of an Integrated Information Management System for the US DOE Hanford Tank Farms Project

    International Nuclear Information System (INIS)

    Joyner, William Scott; Knight, Mark A.

    2013-01-01

    In its role as the Tank Operations Contractor at the U.S. Department of Energy's site in Hanford, WA, Washington River Protection Solutions, LLC is implementing an integrated document control and configuration management system. This system will combine equipment data with technical document data that currently resides in separate disconnected databases. The new system will provide integrated information, enabling users to more readily identify the documents that relate to a structure, system, or component and vice-versa. Additionally, the new system will automate engineering work processes through electronic workflows, and where practical and feasible provide integration with design authoring tools. Implementation of this system will improve configuration management of the technical baseline, increase work process efficiencies, support the efficient design of future large projects, and provide a platform for the efficient future turnover of technical baseline data and information

  2. Implementation of an Integrated Information Management System for the US DOE Hanford Tank Farms Project

    Energy Technology Data Exchange (ETDEWEB)

    Joyner, William Scott; Knight, Mark A.

    2013-11-14

    In its role as the Tank Operations Contractor at the U.S. Department of Energy's site in Hanford, WA, Washington River Protection Solutions, LLC is implementing an integrated document control and configuration management system. This system will combine equipment data with technical document data that currently resides in separate disconnected databases. The new system will provide integrated information, enabling users to more readily identify the documents that relate to a structure, system, or component and vice-versa. Additionally, the new system will automate engineering work processes through electronic workflows, and where practical and feasible provide integration with design authoring tools. Implementation of this system will improve configuration management of the technical baseline, increase work process efficiencies, support the efficient design of future large projects, and provide a platform for the efficient future turnover of technical baseline data and information.

  3. In focus: Haulage management

    International Nuclear Information System (INIS)

    Anon.

    1994-01-01

    The use of sophisticated tracking and communications to manage the loading and haulage system is not confined to open cut mines. Both Modular Mining and El-Equip have worked on haulage systems for De Beers underground diamond mines, while El-Equip is presently providing uranium miner Cameco Corp. with a management and automation communications ''platform''. Kyran Casteel reports on this and the latest news on GPS-based surface systems

  4. Cirip.Eu – An educational microblogging platform around objects 2.0

    Directory of Open Access Journals (Sweden)

    Carmen Holotescu

    2013-03-01

    Full Text Available In recent years, the most daring player in the social media arena proved to be the microblogging technology, the most energetic in this field being Twitter, raising the interest of the educational actors. A number of microblogging platforms dedicated to education were implemented, such as Edmodo, Plurk, Cirip.eu or Twiducate. In this context, the paper aims to provide an overall analysis of the microblogging platform Cirip.eu for educational directions such as: information and knowledge management, courses enhancement, delivering online courses, collaborative projects, communities of practice, hosting different workshops, conferences or scientific events, building e- portfolios, etc. Thus, the main aspects of the paper will regard the following: 1. The facilities offered by Cirip.eu recommend it as a modern and flexible mobile Social Learning Management System (mSLMS, integrating users' Personal Learning Environments; 2. How microblogging can be integrated with other Web2.0 technologies, and into the Open Educational Resources movement; 3. How the experience and the new pedagogical approach in using microblogging can be captured and formally represented as learning design objects; 4. How learning design objects can be shared, discussed, improved, reused on the microblogging platform.

  5. Seqcrawler: biological data indexing and browsing platform.

    Science.gov (United States)

    Sallou, Olivier; Bretaudeau, Anthony; Roult, Aurelien

    2012-07-24

    Seqcrawler takes its roots in software like SRS or Lucegene. It provides an indexing platform to ease the search of data and meta-data in biological banks and it can scale to face the current flow of data. While many biological bank search tools are available on the Internet, mainly provided by large organizations to search their data, there is a lack of free and open source solutions to browse one's own set of data with a flexible query system and able to scale from a single computer to a cloud system. A personal index platform will help labs and bioinformaticians to search their meta-data but also to build a larger information system with custom subsets of data. The software is scalable from a single computer to a cloud-based infrastructure. It has been successfully tested in a private cloud with 3 index shards (pieces of index) hosting ~400 millions of sequence information (whole GenBank, UniProt, PDB and others) for a total size of 600 GB in a fault tolerant architecture (high-availability). It has also been successfully integrated with software to add extra meta-data from blast results to enhance users' result analysis. Seqcrawler provides a complete open source search and store solution for labs or platforms needing to manage large amount of data/meta-data with a flexible and customizable web interface. All components (search engine, visualization and data storage), though independent, share a common and coherent data system that can be queried with a simple HTTP interface. The solution scales easily and can also provide a high availability infrastructure.

  6. Seqcrawler: biological data indexing and browsing platform

    Directory of Open Access Journals (Sweden)

    Sallou Olivier

    2012-07-01

    Full Text Available Abstract Background Seqcrawler takes its roots in software like SRS or Lucegene. It provides an indexing platform to ease the search of data and meta-data in biological banks and it can scale to face the current flow of data. While many biological bank search tools are available on the Internet, mainly provided by large organizations to search their data, there is a lack of free and open source solutions to browse one’s own set of data with a flexible query system and able to scale from a single computer to a cloud system. A personal index platform will help labs and bioinformaticians to search their meta-data but also to build a larger information system with custom subsets of data. Results The software is scalable from a single computer to a cloud-based infrastructure. It has been successfully tested in a private cloud with 3 index shards (pieces of index hosting ~400 millions of sequence information (whole GenBank, UniProt, PDB and others for a total size of 600 GB in a fault tolerant architecture (high-availability. It has also been successfully integrated with software to add extra meta-data from blast results to enhance users’ result analysis. Conclusions Seqcrawler provides a complete open source search and store solution for labs or platforms needing to manage large amount of data/meta-data with a flexible and customizable web interface. All components (search engine, visualization and data storage, though independent, share a common and coherent data system that can be queried with a simple HTTP interface. The solution scales easily and can also provide a high availability infrastructure.

  7. A survey of IoT cloud platforms

    Directory of Open Access Journals (Sweden)

    Partha Pratim Ray

    2016-12-01

    Full Text Available Internet of Things (IoT envisages overall merging of several “things” while utilizing internet as the backbone of the communication system to establish a smart interaction between people and surrounding objects. Cloud, being the crucial component of IoT, provides valuable application specific services in many application domains. A number of IoT cloud providers are currently emerging into the market to leverage suitable and specific IoT based services. In spite of huge possible involvement of these IoT clouds, no standard cum comparative analytical study has been found across the literature databases. This article surveys popular IoT cloud platforms in light of solving several service domains such as application development, device management, system management, heterogeneity management, data management, tools for analysis, deployment, monitoring, visualization, and research. A comparison is presented for overall dissemination of IoT clouds according to their applicability. Further, few challenges are also described that the researchers should take on in near future. Ultimately, the goal of this article is to provide detailed knowledge about the existing IoT cloud service providers and their pros and cons in concrete form.

  8. Signs management and acquisition system for measurement of thermo physics properties of nuclear fuel

    International Nuclear Information System (INIS)

    Migliorini, Fabricio Lima; Silva, Egonn Hendrigo Carvalho; Neto Ferreira, Ricardo Alberto; Miranda, Odair; Grossi, Pablo Andrade; Camarano, Denise das Merces

    2009-01-01

    This work presents the management and acquisition system (SGA-LMPT) developed in a Lab View platform implemented at the Laboratory for Measurement of Thermophysics Properties at the Center for Development of Nuclear Technology - Brazilian Nuclear Energy Commission (CDTN/CNEN-MG). The SGA-LMPT is a tool which guarantee the complete fulfilment of the regulatory regulations, allowing a much more quality, productivity, costs reduction and optimization of the laboratory process. Besides, the SGA-LMPT presents the necessary requirements for demonstration a management system capable to produce results technically valid. The determination of the thermal diffusivity of the UO 2 pellet fabricated with microspheres was used for demonstration of the new system adequacy for the measurement of nuclear fuel thermo physics properties. The results were discussed and compared with literature

  9. WindS@UP: The e-Science Platform for WindScanner.eu

    Science.gov (United States)

    Gomes, Filipe; Correia Lopes, João; Laginha Palma, José; Frölén Ribeiro, Luís

    2014-06-01

    The WindScanner e-Science platform architecture and the underlying premises are discussed. It is a collaborative platform that will provide a repository for experimental data and metadata. Additional data processing capabilities will be incorporated thus enabling in-situ data processing. Every resource in the platform is identified by a Uniform Resource Identifier (URI), enabling an unequivocally identification of the field(s) campaign(s) data sets and metadata associated with the data set or experience. This feature will allow the validation of field experiment results and conclusions as all managed resources will be linked. A centralised node (Hub) will aggregate the contributions of 6 to 8 local nodes from EC countries and will manage the access of 3 types of users: data-curator, data provider and researcher. This architecture was designed to ensure consistent and efficient research data access and preservation, and exploitation of new research opportunities provided by having this "Collaborative Data Infrastructure". The prototype platform-WindS@UP-enables the usage of the platform by humans via a Web interface or by machines using an internal API (Application Programming Interface). Future work will improve the vocabulary ("application profile") used to describe the resources managed by the platform.

  10. SIS Security White Paper: Managing privacy and security for the Service Information System

    OpenAIRE

    Kerr, Gillian; Johnson, Alberta; Gaudon, Sara

    2018-01-01

    The Service Information System (SIS) is a monitoring and evaluation platform built on open source software and donated Microsoft services that is offered on a subscription basis to nonprofits providing any kind of service. It is developed and managed by LogicalOutcomes, a Canadian nonprofit, and launched in March 2018. The first implementation was created in partnership with the Ontario Coalition of Agencies Serving Immigrants, funded by the Ontario Ministry of Citizenship and Immigration. ...

  11. How to Configurate Oracle Enterprise Manager on Windows 2000 Server

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Oracle Enterprise Manager is a system management tool, which provides an integrated solution for centrally managing your heterogeneous environment Servers. Enterprise Manager combines a graphical Console, Oracle Management Servers, Oracle Intelligent Agents, common services, and tools to provide an integrated, comprehensive systems management platform for managing Oracle products, and is comprised of such as Data

  12. A multi-chip data acquisition system based on a heterogeneous system-on-chip platform

    CERN Document Server

    Fiergolski, Adrian

    2017-01-01

    The Control and Readout Inner tracking BOard (CaRIBOu) is a versatile readout system targeting a multitude of detector prototypes. It profits from the heterogeneous platform of the Zynq System-on-Chip (SoC) and integrates in a monolithic device front-end FPGA resources with a back-end software running on a hard-core ARM-based processor. The user-friendly Linux terminal with the pre-installed DAQ software is combined with the efficiency and throughput of a system fully implemented in the FPGA fabric. The paper presents the design of the SoC-based DAQ system and its building blocks. It also shows examples of the achieved functionality for the CLICpix2 readout ASIC.

  13. Grid-based platform for training in Earth Observation

    Science.gov (United States)

    Petcu, Dana; Zaharie, Daniela; Panica, Silviu; Frincu, Marc; Neagul, Marian; Gorgan, Dorian; Stefanut, Teodor

    2010-05-01

    GiSHEO platform [1] providing on-demand services for training and high education in Earth Observation is developed, in the frame of an ESA funded project through its PECS programme, to respond to the needs of powerful education resources in remote sensing field. It intends to be a Grid-based platform of which potential for experimentation and extensibility are the key benefits compared with a desktop software solution. Near-real time applications requiring simultaneous multiple short-time-response data-intensive tasks, as in the case of a short time training event, are the ones that are proved to be ideal for this platform. The platform is based on Globus Toolkit 4 facilities for security and process management, and on the clusters of four academic institutions involved in the project. The authorization uses a VOMS service. The main public services are the followings: the EO processing services (represented through special WSRF-type services); the workflow service exposing a particular workflow engine; the data indexing and discovery service for accessing the data management mechanisms; the processing services, a collection allowing easy access to the processing platform. The WSRF-type services for basic satellite image processing are reusing free image processing tools, OpenCV and GDAL. New algorithms and workflows were develop to tackle with challenging problems like detecting the underground remains of old fortifications, walls or houses. More details can be found in [2]. Composed services can be specified through workflows and are easy to be deployed. The workflow engine, OSyRIS (Orchestration System using a Rule based Inference Solution), is based on DROOLS, and a new rule-based workflow language, SILK (SImple Language for worKflow), has been built. Workflow creation in SILK can be done with or without a visual designing tools. The basics of SILK are the tasks and relations (rules) between them. It is similar with the SCUFL language, but not relying on XML in

  14. A Monitoring and Control System for Aquaculture via Wireless Network and Android Platform

    Directory of Open Access Journals (Sweden)

    Juan Huan

    2014-04-01

    Full Text Available Web applications, databases and advanced mobile platform can facilitate real-time data acquisition for effective monitoring on intelligent agriculture. To improve facilities for aquaculture production automation and efficient, this paper presents an application for wireless network and Android platform that interacts with an advanced control system based on Apache, SQL Server, Java, to collect and monitor variables applied in aquaculture. The test and application shows that is stable, high price-performance ratio, good mobility and easy to operate, It has a strong practicality and application prospects.

  15. Dynamic performance of power generation systems for off-shore oil and gas platforms

    DEFF Research Database (Denmark)

    Pierobon, Leonardo; Breuhaus, Peter; Haglind, Fredrik

    2014-01-01

    %) arises on the prediction of the rotational speed of the high pressure shaft, while the largest deviation (average relative error ~20%) occurs in the evaluation of the pressure at the outlet of the low pressure turbine. As waste heat recovery units (e.g. organic Rankine cycles) are likely...... to be implemented in future off-shore platforms, the proposed model may serve in the design phase for a preliminary assessment of the dynamic response of the power generation system and to evaluate if requirements such as minimum and maximum frequency during transient operation and the recovery time are satisfied......On off-shore oil and gas platforms two or more gas turbines typically support the electrical demand on site by operating as a stand-alone (island) power system. As reliability and availability are major concerns during operation, the dynamic performance of the power generation system becomes...

  16. A Tactile Sensor Network System Using a Multiple Sensor Platform with a Dedicated CMOS-LSI for Robot Applications †

    Science.gov (United States)

    Shao, Chenzhong; Tanaka, Shuji; Nakayama, Takahiro; Hata, Yoshiyuki; Bartley, Travis; Muroyama, Masanori

    2017-01-01

    Robot tactile sensation can enhance human–robot communication in terms of safety, reliability and accuracy. The final goal of our project is to widely cover a robot body with a large number of tactile sensors, which has significant advantages such as accurate object recognition, high sensitivity and high redundancy. In this study, we developed a multi-sensor system with dedicated Complementary Metal-Oxide-Semiconductor (CMOS) Large-Scale Integration (LSI) circuit chips (referred to as “sensor platform LSI”) as a framework of a serial bus-based tactile sensor network system. The sensor platform LSI supports three types of sensors: an on-chip temperature sensor, off-chip capacitive and resistive tactile sensors, and communicates with a relay node via a bus line. The multi-sensor system was first constructed on a printed circuit board to evaluate basic functions of the sensor platform LSI, such as capacitance-to-digital and resistance-to-digital conversion. Then, two kinds of external sensors, nine sensors in total, were connected to two sensor platform LSIs, and temperature, capacitive and resistive sensing data were acquired simultaneously. Moreover, we fabricated flexible printed circuit cables to demonstrate the multi-sensor system with 15 sensor platform LSIs operating simultaneously, which showed a more realistic implementation in robots. In conclusion, the multi-sensor system with up to 15 sensor platform LSIs on a bus line supporting temperature, capacitive and resistive sensing was successfully demonstrated. PMID:29061954

  17. A case study in open source innovation: developing the Tidepool Platform for interoperability in type 1 diabetes management.

    Science.gov (United States)

    Neinstein, Aaron; Wong, Jenise; Look, Howard; Arbiter, Brandon; Quirk, Kent; McCanne, Steve; Sun, Yao; Blum, Michael; Adi, Saleh

    2016-03-01

    Develop a device-agnostic cloud platform to host diabetes device data and catalyze an ecosystem of software innovation for type 1 diabetes (T1D) management. An interdisciplinary team decided to establish a nonprofit company, Tidepool, and build open-source software. Through a user-centered design process, the authors created a software platform, the Tidepool Platform, to upload and host T1D device data in an integrated, device-agnostic fashion, as well as an application ("app"), Blip, to visualize the data. Tidepool's software utilizes the principles of modular components, modern web design including REST APIs and JavaScript, cloud computing, agile development methodology, and robust privacy and security. By consolidating the currently scattered and siloed T1D device data ecosystem into one open platform, Tidepool can improve access to the data and enable new possibilities and efficiencies in T1D clinical care and research. The Tidepool Platform decouples diabetes apps from diabetes devices, allowing software developers to build innovative apps without requiring them to design a unique back-end (e.g., database and security) or unique ways of ingesting device data. It allows people with T1D to choose to use any preferred app regardless of which device(s) they use. The authors believe that the Tidepool Platform can solve two current problems in the T1D device landscape: 1) limited access to T1D device data and 2) poor interoperability of data from different devices. If proven effective, Tidepool's open source, cloud model for health data interoperability is applicable to other healthcare use cases. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association.

  18. Dynamic simulation platform to verify the performance of the reactor regulating system for a research reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    Digital instrumentation and controls system technique is being introduced in new constructed research reactor or life extension of older research reactor. Digital systems are easy to change and optimize but the validated process for them is required. Also, to reduce project risk or cost, we have to make it sure that configuration and control functions is right before the commissioning phase on research reactor. For this purpose, simulators have been widely used in developing control systems in automotive and aerospace industries. In these literatures, however, very few of these can be found regarding test on the control system of research reactor with simulator. Therefore, this paper proposes a simulation platform to verify the performance of RRS (Reactor Regulating System) for research reactor. This simulation platform consists of the reactor simulation model and the interface module. This simulation platform is applied to I and C upgrade project of TRIGA reactor, and many problems of RRS configuration were found and solved. And it proved that the dynamic performance testing based on simulator enables significant time saving and improves economics and quality for RRS in the system test phase. (authors)

  19. Design and Realization of a Condition Management System for the Gateway Electrical Energy Metering Device

    Directory of Open Access Journals (Sweden)

    Chao Tang

    2013-12-01

    Full Text Available With the construction of firm and intelligent power grid in China, it is difficult for the traditional management method of electrical energy metering device to meet the prospecting requirements. Using the computer and internet techniques to realize the information and intelligentization of the electrical energy metering management has become a necessary guarantee of improving power supply ability, marketing control, and customer service. This paper introduced a kind of large and intelligent condition management system of the gateway electrical energy metering device. The key technologies and realize process were analyzed. Moreover, a detailed description of the application modules such as the GIS smart display of metering point, the condition management of metering devices and the visual monitoring of metering point was presented. The trial operation in the selected transformer substations and the power stations of Chongqing Power Electrical Corp. indicated that, the condition management system is very open, safety and efficient. According to the data exchange with the production and scheduling platform, the system improved the efficient operation of the electrical energy metering devices. Meanwhile, combined with the real-time visual monitoring, the condition management system improved the prevention ability of electricity filching, realized the unified automatic large-scale management of electrical energy metering devices.

  20. Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

    Science.gov (United States)

    Chen, Bor-Sen; Wu, Chia-Chou

    2013-01-01

    Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i) system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii) system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii) system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv) systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering. PMID:24709875

  1. Systems Biology as an Integrated Platform for Bioinformatics, Systems Synthetic Biology, and Systems Metabolic Engineering

    Directory of Open Access Journals (Sweden)

    Bor-Sen Chen

    2013-10-01

    Full Text Available Systems biology aims at achieving a system-level understanding of living organisms and applying this knowledge to various fields such as synthetic biology, metabolic engineering, and medicine. System-level understanding of living organisms can be derived from insight into: (i system structure and the mechanism of biological networks such as gene regulation, protein interactions, signaling, and metabolic pathways; (ii system dynamics of biological networks, which provides an understanding of stability, robustness, and transduction ability through system identification, and through system analysis methods; (iii system control methods at different levels of biological networks, which provide an understanding of systematic mechanisms to robustly control system states, minimize malfunctions, and provide potential therapeutic targets in disease treatment; (iv systematic design methods for the modification and construction of biological networks with desired behaviors, which provide system design principles and system simulations for synthetic biology designs and systems metabolic engineering. This review describes current developments in systems biology, systems synthetic biology, and systems metabolic engineering for engineering and biology researchers. We also discuss challenges and future prospects for systems biology and the concept of systems biology as an integrated platform for bioinformatics, systems synthetic biology, and systems metabolic engineering.

  2. An XML Based Knowledge Management System for e-Collaboration and e-Learning

    Directory of Open Access Journals (Sweden)

    Varun Gopalakrishna

    2004-02-01

    Full Text Available This paper presents the development, key features, and the implementation principles of a sustainable and scaleable knowledge management system (KMS prototype for creating, capturing, organizing, and managing digital information in the form of Extensible Markup Language (XML documents and other popular file formats. It is aimed to provide a platform for global, instant, and secure access to and dissemination of information within a knowledge-intensive organization or a cluster of organizations through Internet or intranet. A three-tier system architecture was chosen for the KMS to provide performance and scalability while enabling future development that supports global, secure, real-time, and multi-media communication of information and knowledge among team members separated by great distance. An XML Content Server has been employed in this work to store, index, and retrieve large volumes of XML and binary content.

  3. Education for Managing Digital Transformation: A Feedback Systems Approach

    Directory of Open Access Journals (Sweden)

    Michael Von Kutzschenbach

    2017-04-01

    Full Text Available "Digital transformation" is becoming the newest mantra of business leaders. It is clear that there are tremendous business opportunities resulting from this revolution, but there is also a price to be paid. Most management literature focuses on the benefits of digitalization, reflecting the desire to increase performance and efficiency in selected business activities. However, digital transformations may lead to the disruption of established ways of doing the work of the firm, stakeholder power may be fundamentally changed, and there is the potential for redefining the nature of the firm itself. Consequently, the decision to "go digital" requires managers to develop perspectives that have the requisite variety to cope with these challenges. Feedback systems thinking is a powerful means for managers to develop and communicate business models that include those aspects of digitalization that affects their firm's theory of success. The Uber case illustrates the principles of applying feedback systems thinking to the radical changes that it has presented the public transportation sector. This paper analyzes Uber's platform business by presenting an endogenous explanation of the drivers and eventual constraints to growth of the theory of success upon which the firm is based. This type of analysis has implications for all firms considering implementing a significant digital transformation process.

  4. Control system design and validation platform development for small pressurized water reactors (SPWR) by coupling an engineering simulator and MATLAB/Simulink

    International Nuclear Information System (INIS)

    Sun, Peiwei; Zhao, Huanhuan; Liao, Longtao; Zhang, Jianmin; Su, Guanghui

    2017-01-01

    Highlights: • An SPWR control system design and validation platform is developed. • The platform is developed by coupling MATLAB/Simulink and an engineering simulator. • SPWR is modeled using Relap5 and preliminary control system is designed. • The platform is verified through numerical simulation over two typical load patterns. - Abstract: Significant progress has been made in the development of the small pressurized water reactors (SPWR). Unique characteristics of the SPWR deliver challenges to its control system design. In order to facilitate the control system design process and enhance its efficiency, it is important and necessary to establish a control system design and validation platform. Using shared memory technology, an engineering simulator coupled with MATLAB/Simulink is employed to achieve this objective. Shared memory is an efficient method to exchange data within programs. Dynamic data exchange and simulation time synchronization methods are particularly treated. To verify the platform, an SPWR with its control system is modeled using the platform and the simulator. Thermal-hydraulic modeling of the SPWR is carried out using Relap5, and its nodalization is introduced. The objectives of the control strategy are to maintain the average coolant temperature linearly varying with the reactor power and steam pressure constant. A preliminary SPWR control system is designed with proportional-integral-derivative (PID) controllers, and is implemented in MATLAB/Simulink associated with the engineering simulator. Subsequently, in order to evaluate the performance of the established simulation platform, transients of abrupt load changes and wide range load changes are simulated and simulation results are verified against those obtained from the engineering simulator alone. It is demonstrated that simulation results of both platforms are consistent with each other, which proves that the coupling of engineering simulator and MATLAB/Simulink is successful

  5. Development of an IHE MRRT-compliant open-source web-based reporting platform.

    Science.gov (United States)

    Pinto Dos Santos, Daniel; Klos, G; Kloeckner, R; Oberle, R; Dueber, C; Mildenberger, P

    2017-01-01

    To develop a platform that uses structured reporting templates according to the IHE Management of Radiology Report Templates (MRRT) profile, and to implement this platform into clinical routine. The reporting platform uses standard web technologies (HTML / JavaScript and PHP / MySQL) only. Several freely available external libraries were used to simplify the programming. The platform runs on a standard web server, connects with the radiology information system (RIS) and PACS, and is easily accessible via a standard web browser. A prototype platform that allows structured reporting to be easily incorporated into the clinical routine was developed and successfully tested. To date, 797 reports were generated using IHE MRRT-compliant templates (many of them downloaded from the RSNA's radreport.org website). Reports are stored in a MySQL database and are easily accessible for further analyses. Development of an IHE MRRT-compliant platform for structured reporting is feasible using only standard web technologies. All source code will be made available upon request under a free license, and the participation of other institutions in further development is welcome. • A platform for structured reporting using IHE MRRT-compliant templates is presented. • Incorporating structured reporting into clinical routine is feasible. • Full source code will be provided upon request under a free license.

  6. Substitutional Reality System: A Novel Experimental Platform for Experiencing Alternative Reality

    OpenAIRE

    Suzuki, Keisuke; Wakisaka, Sohei; Fujii, Naotaka

    2012-01-01

    We have developed a novel experimental platform, referred to as a substitutional reality (SR) system, for studying the conviction of the perception of live reality and related metacognitive functions. The SR system was designed to manipulate people's reality by allowing them to experience live scenes (in which they were physically present) and recorded scenes (which were recorded and edited in advance) in an alternating manner without noticing a reality gap. All of the naïve participants (n =...

  7. Design and Performance Evaluation of an Adaptive Resource Management Framework for Distributed Real-Time and Embedded Systems

    Directory of Open Access Journals (Sweden)

    Chen Yingming

    2008-01-01

    Full Text Available Abstract Achieving end-to-end quality of service (QoS in distributed real-time embedded (DRE systems require QoS support and enforcement from their underlying operating platforms that integrates many real-time capabilities, such as QoS-enabled network protocols, real-time operating system scheduling mechanisms and policies, and real-time middleware services. As standards-based quality of service (QoS enabled component middleware automates integration and configuration activities, it is increasingly being used as a platform for developing open DRE systems that execute in environments where operational conditions, input workload, and resource availability cannot be characterized accurately a priori. Although QoS-enabled component middleware offers many desirable features, however, it historically lacked the ability to allocate resources efficiently and enable the system to adapt to fluctuations in input workload, resource availability, and operating conditions. This paper presents three contributions to research on adaptive resource management for component-based open DRE systems. First, we describe the structure and functionality of the resource allocation and control engine (RACE, which is an open-source adaptive resource management framework built atop standards-based QoS-enabled component middleware. Second, we demonstrate and evaluate the effectiveness of RACE in the context of a representative open DRE system: NASA's magnetospheric multiscale mission system. Third, we present an empirical evaluation of RACE's scalability as the number of nodes and applications in a DRE system grows. Our results show that RACE is a scalable adaptive resource management framework and yields a predictable and high-performance system, even in the face of changing operational conditions and input workload.

  8. Design and Performance Evaluation of an Adaptive Resource Management Framework for Distributed Real-Time and Embedded Systems

    Directory of Open Access Journals (Sweden)

    Chenyang Lu

    2008-04-01

    Full Text Available Achieving end-to-end quality of service (QoS in distributed real-time embedded (DRE systems require QoS support and enforcement from their underlying operating platforms that integrates many real-time capabilities, such as QoS-enabled network protocols, real-time operating system scheduling mechanisms and policies, and real-time middleware services. As standards-based quality of service (QoS enabled component middleware automates integration and configuration activities, it is increasingly being used as a platform for developing open DRE systems that execute in environments where operational conditions, input workload, and resource availability cannot be characterized accurately a priori. Although QoS-enabled component middleware offers many desirable features, however, it historically lacked the ability to allocate resources efficiently and enable the system to adapt to fluctuations in input workload, resource availability, and operating conditions. This paper presents three contributions to research on adaptive resource management for component-based open DRE systems. First, we describe the structure and functionality of the resource allocation and control engine (RACE, which is an open-source adaptive resource management framework built atop standards-based QoS-enabled component middleware. Second, we demonstrate and evaluate the effectiveness of RACE in the context of a representative open DRE system: NASA's magnetospheric multiscale mission system. Third, we present an empirical evaluation of RACE's scalability as the number of nodes and applications in a DRE system grows. Our results show that RACE is a scalable adaptive resource management framework and yields a predictable and high-performance system, even in the face of changing operational conditions and input workload.

  9. The Energy Savings and Environmental Benefits for Small and Medium Enterprises by Cloud Energy Management System

    Directory of Open Access Journals (Sweden)

    Yen-Chieh Tseng

    2016-06-01

    Full Text Available Small and medium enterprises (SMES play an important role in Taiwan’s economy. The reduction of energy costs and carbon dioxide (CO2 emissions are critical to preserving the environment. This paper uses the experimental results from 65 sites, gathered over two years since 2012, to determine how the integration of Internet communication, cloud computing technologies and a cloud energy management service (cloud EMS can reduce energy consumption by cost-effective means. The EMS has three levels: infrastructure as a service (IaaS, platform as a service (PaaS and software as a service (SaaS. Working jointly with ChungHwa Telecom, Taiwan’s leading telecom service provider, data from detection devices, control devices, air-conditioning and lighting systems are all uploaded to a cloud EMS platform, to give a so called intelligent energy management network application service platform (IEN-ASP. Various energy saving management functions are developed using this platform: (1 air conditioning optimization; (2 lighting system optimization; (3 scheduling control; (4 power billing control and (5 occupancy detection and timing control. Using the international performance measurement and verification protocol (IPMVP, the energy used at the test sites, before and after the use of the IEN-ASP, are compared to calculate the energy saved. The experimental results show that there is an average energy saving of 5724 kWh per year, which represents a saving ratio of 5.84%. This translates to a total reduction in CO2 emissions of 9,926,829 kg per year. Using the data collected, a regression model is used to demonstrate the correlation between the power that is consumed, the energy that is saved and the area of the sites. Another interesting result is that, if the experimental sites are maintained by experienced electricians or other personnel and EMS protocols are followed, the energy saving can be as great as 6.59%.

  10. The Relationship between Chief Information Officer Transformational Leadership and Computing Platform Operating Systems

    Science.gov (United States)

    Anderson, George W.

    2010-01-01

    The purpose of this study was to relate the strength of Chief Information Officer (CIO) transformational leadership behaviors to 1 of 5 computing platform operating systems (OSs) that may be selected for a firm's Enterprise Resource Planning (ERP) business system. Research shows executive leader behaviors may promote innovation through the use of…

  11. Ranking System for IoT Industry Platform

    OpenAIRE

    Mukherjee, Somshree

    2016-01-01

    The Internet of Things (IoT) has seen a huge growth spurt in the last few years which has resulted in the need for more standardised IoT technology. Because of this, numerous IoT platforms have sprung up that offer a variety of features and use different technologies which may not necessarily be compliant with each other or with other technologies. Companies that wish to enter theIoT market are in constant need to find the most suitable IoT platform for their business and have a certain set o...

  12. Maintenance management systems

    International Nuclear Information System (INIS)

    Rohan, M. de

    1989-01-01

    This paper is concerned principally with Maintenance Management systems and their effective introduction into organisations. Maintenance improvement is basically a problem of managing the maintenance department in the broadest sense. Improvement does not only lie in the area of special techniques, systems or procedures; although they are valuable tools, but rather in a balanced attack, carefully guided by management. Over recent years, maintenance systems have received the major emphasis and in many instances the selection of the system has become a pre-occupation, whereas the importance of each maintenance function must be recognised and good management practices applied to all maintenance activities. The ingredients for success in the implementation of maintenance management systems are summarised as: having a management committee, clear objectives, project approach using project management techniques and an enthusiastic leader, user managed and data processing supported project, realistic budget and an understanding of the financial audit requirements. (author)

  13. The role of social values in the management of ecological systems.

    Science.gov (United States)

    Ives, Christopher D; Kendal, Dave

    2014-11-01

    The concept of value is central to the practice and science of ecological management and conservation. There is a well-developed body of theory and evidence that explores concepts of value in different ways across different disciplines including philosophy, economics, sociology and psychology. Insight from these disciplines provides a robust and sophisticated platform for considering the role of social values in ecological conservation, management and research. This paper reviews theories of value from these disciplines and discusses practical tools and instruments that can be utilised by researchers and practitioners. A distinction is highlighted between underlying values that shape people's perception of the world (e.g. altruistic or biospheric value orientations), and the values that people assign to things in the world (e.g. natural heritage, money). Evidence from numerous studies has shown that there are multiple pathways between these values and attitudes, beliefs and behaviours relevant to ecological management and conservation. In an age of increasing anthropogenic impacts on natural systems, recognising how and why people value different aspects of ecological systems can allow ecological managers to act to minimise conflict between stakeholders and promote the social acceptability of management activities. A series of practical guidelines are provided to enable social values to be better considered in ecosystem management and research. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Mesozoic carbonate-siliciclastic platform to basin systems of a South Tethyan margin (Egypt, East Mediterranean)

    Science.gov (United States)

    Tassy, Aurélie; Crouzy, Emmanuel; Gorini, Christian; Rubino, Jean-Loup

    2015-04-01

    The Mesozoïc Egyptian margin is the south margin of a remnant of the Neo-Tethys Ocean, at the African northern plate boundary. East Mediterranean basin developed during the late Triassic-Early Jurassic rifting with a NW-SE opening direction (Frizon de Lamotte et al., 2011). During Mesozoïc, Egypt margin was a transform margin with a NW-SE orientation of transform faults. In the Eastern Mediterranean basin, Mesozoïc margins are characterized by mixed carbonate-siliciclastics platforms where subsidence and eustacy are the main parameters controlling the facies distribution and geometries of the platform-to-basin transition. Geometries and facies on the platform-slope-basin system, today well constrained on the Levant area, where still poorly known on the Egyptian margin. Geometries and stratigraphic architecture of the Egyptian margin are revealed, thanks to a regional seismic and well data-base provided by an industrial-academic group (GRI, Total). The objective is to understand the sismostratigraphic architecture of the platform-slope-basin system in a key area from Western Desert to Nile delta and Levant margin. Mapping of the top Jurassic and top Cretaceous show seismic geomorphology of the margin, with the cartography of the hinge line from Western Desert to Sinaï. During the Jurassic, carbonate platform show a prograding profile and a distally thickening of the external platform, non-abrupt slope profiles, and palaeovalleys incisions. Since the Cretaceous, the aggrading and retrograding mixed carbonate-siliciclastic platform show an alternation of steep NW-SE oblique segments and distally steepened segments. These structures of the platform edge are strongly controlled by the inherited tethyan transform directions. Along the hinge line, embayments are interpreted as megaslides. The basin infilling is characterised by an alternation of chaotic seismic facies and high amplitude reflectors onlaping the paleoslopes. MTC deposits can mobilize thick sedimentary

  15. Front-end development and multi-language implementation on Magento Platform

    OpenAIRE

    Lai, Chenjia

    2015-01-01

    Magento is a smart platform for E-commerce solutions. Aseanic Trading Oy plans to develop a website based on the Magento platform. The purpose of this project is to develop an E-commerce platform for middle and small companies, to improve product management, and to increase a company’s profit. This project is developed based on the Magento platform. The backend of the Magento platform uses PHP language, while the frontend uses DIV, CSS and jQuery. Also, MySQL is used as the database suppo...

  16. Smart wireless continence management system for persons with dementia.

    Science.gov (United States)

    Wai, Aung Aung Phyo; Fook, Victor Foo Siang; Jayachandran, Maniyeri; Biswas, Jit; Nugent, Chris; Mulvenna, Maurice; Lee, Jer-En; Kiat, Philp Yap Lian

    2008-10-01

    Incontinence is highly prevalent in the elderly population, especially in nursing home residents with dementia. It is a distressing and costly health problem that affects not only the patients but also the caregivers. Effective continence management is required to provide quality care, and to eliminate high labor costs and annoyances to the caregivers resulting from episodes of incontinence. This paper presents the design, development, and preliminary deployment of a smart wireless continence management system for dementia-impaired elderly or patients in institutional care settings such as nursing homes and hospitals. Specifically, the mote wireless platform was used to support the deployment of potentially large quantities of wetness sensors with wider coverage and with dramatically less complexity and cost. It consists of an intelligent signal relay mechanism so that the residents are free to move about in the nursing home or hospital and allows personalized continence management service. Preliminary results from a trial in a local nursing home are promising and can significantly improve the quality of care for patients.

  17. National Community Solar Platform

    Energy Technology Data Exchange (ETDEWEB)

    Rupert, Bart [Clean Energy Collective, Louisville, CO (United States)

    2016-06-30

    This project was created to provide a National Community Solar Platform (NCSP) portal known as Community Solar Hub, that is available to any entity or individual who wants to develop community solar. This has been done by providing a comprehensive portal to make CEC’s solutions, and other proven community solar solutions, externally available for everyone to access – making the process easy through proven platforms to protect subscribers, developers and utilities. The successful completion of this project provides these tools via a web platform and integration APIs, a wide spectrum of community solar projects included in the platform, multiple groups of customers (utilities, EPCs, and advocates) using the platform to develop community solar, and open access to anyone interested in community solar. CEC’s Incubator project includes web-based informational resources, integrated systems for project information and billing systems, and engagement with customers and users by community solar experts. The combined effort externalizes much of Clean Energy Collective’s industry-leading expertise, allowing third parties to develop community solar without duplicating expensive start-up efforts. The availability of this platform creates community solar projects that are cheaper to build and cheaper to participate in, furthering the goals of DOE’s SunShot Initiative. Final SF 425 Final SF 428 Final DOE F 2050.11 Final Report Narrative

  18. GUI Application for ATCA-based LLRF Carrier Board Management

    CERN Document Server

    Wychowaniak, Jan; Predki, Pawel; Napieralski, Andrzej

    2011-01-01

    The Advanced Telecommunications Computing Architecture (ATCA) standard describes an efficient and powerful platform, implementation of which was adopted to be used as a base for control systems in high energy physics. The ATCA platform is considered to be applied for the X-ray Free Electron Laser (X-FEL), being built at Deutsches Electronen- Synchrotron (DESY) in Hamburg, Germany. The Low Level Radio Frequency (LLRF) control system is composed of a few ATCA Carrier Boards. Carrier Board hosts Intelligent Platform Management Controller (IPMC), which is developed in compliance with the PICMG specifications. IPMC is responsible for management and monitoring of sub-modules installed on Carrier Boards and pluggable Advanced Mezzanine Card (AMC) modules. The ATCA Shelf Manager is the main control unit of a single ATCA crate, responsible for all power and fan modules and Carrier Boards installed in ATCA shelf. The device provides a system administrator with a set of control and diagnostic capabilities regarding the ...

  19. Bridge Management Systems

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    In this paper bridge management systems are discussed with special emphasis on management systems for reinforced concrete bridges. Management systems for prestressed concrete bridges, steel bridges, or composite bridges can be developed in a similar way....

  20. Globus Platform-as-a-Service for Collaborative Science Applications.

    Science.gov (United States)

    Ananthakrishnan, Rachana; Chard, Kyle; Foster, Ian; Tuecke, Steven

    2015-02-01

    Globus, developed as Software-as-a-Service (SaaS) for research data management, also provides APIs that constitute a flexible and powerful Platform-as-a-Service (PaaS) to which developers can outsource data management activities such as transfer and sharing, as well as identity, profile and group management. By providing these frequently important but always challenging capabilities as a service, accessible over the network, Globus PaaS streamlines web application development and makes it easy for individuals, teams, and institutions to create collaborative applications such as science gateways for science communities. We introduce the capabilities of this platform and review representative applications.