WorldWideScience

Sample records for plasmaspheric drainage plumes

  1. Global Circulation and Impact of Plasmaspheric Plumes

    Science.gov (United States)

    Moore, Thomas E.; Fok, Mei-Ching; Chen, Sheng-Hsiem; Delcourt, Dominique C.; Fedder, Joel A.; Slinker, Steven P.

    2008-01-01

    We report results from the global circulation model of Lyon, Fedder, and Mobarry with an embedded model of the inner magnetosphere including the plasmasphere. The combination is used to initiate large numbers of representative protons on the geosynchronous orbit L shell, to assign particle weightings, to track their: subsequent trajectories in the 3D fields. This permits us to study the global circulation of plasmaspheric plumes and to compare these with Polar observations from the dayside magnetopause region . A range of events is studied from an isolated period of SBz in the solar wind,to a large storm sequence. We consider effects on circulating plasma reaching the dayside reconnection X-line, the population of the plasma sheet with ionospheric protons and the generation of ring current pressure from this source, compared with solar wind, polar wind, and auroral wind sources. We find that the transient plasmaspheric plume source is large in terms of total fluence, but of modest proportions in terms of contribution to the ring current. Implications of this and other results for improved space weather modeling and prediction will be discussed.

  2. Remote sensing the plasmasphere, plasmapause, plumes and other features using ground-based magnetometers

    Directory of Open Access Journals (Sweden)

    Menk Frederick

    2014-01-01

    Full Text Available The plasmapause is a highly dynamic boundary between different magnetospheric particle populations and convection regimes. Some of the most important space weather processes involve wave-particle interactions in this region, but wave properties may also be used to remote sense the plasmasphere and plasmapause, contributing to plasmasphere models. This paper discusses the use of existing ground magnetometer arrays for such remote sensing. Using case studies we illustrate measurement of plasmapause location, shape and movement during storms; refilling of flux tubes within and outside the plasmasphere; storm-time increase in heavy ion concentration near the plasmapause; and detection and mapping of density irregularities near the plasmapause, including drainage plumes, biteouts and bulges. We also use a 2D MHD model of wave propagation through the magnetosphere, incorporating a realistic ionosphere boundary and Alfvén speed profile, to simulate ground array observations of power and cross-phase spectra, hence confirming the signatures of plumes and other density structures.

  3. Analysis of plasmaspheric plumes: CLUSTER and IMAGE observations and numerical simulations

    Science.gov (United States)

    Darouzet, Fabien; DeKeyser, Johan; Decreau, Pierrette; Gallagher, Dennis; Pierrard, Viviane; Lemaire, Joseph; Dandouras, Iannis; Matsui, Hiroshi; Dunlop, Malcolm; Andre, Mats

    2005-01-01

    Plasmaspheric plumes have been routinely observed by CLUSTER and IMAGE. The CLUSTER mission provides high time resolution four-point measurements of the plasmasphere near perigee. Total electron density profiles can be derived from the plasma frequency and/or from the spacecraft potential (note that the electron spectrometer is usually not operating inside the plasmasphere); ion velocity is also measured onboard these satellites (but ion density is not reliable because of instrumental limitations). The EUV imager onboard the IMAGE spacecraft provides global images of the plasmasphere with a spatial resolution of 0.1 RE every 10 minutes; such images acquired near apogee from high above the pole show the geometry of plasmaspheric plumes, their evolution and motion. We present coordinated observations for 3 plume events and compare CLUSTER in-situ data (panel A) with global images of the plasmasphere obtained from IMAGE (panel B), and with numerical simulations for the formation of plumes based on a model that includes the interchange instability mechanism (panel C). In particular, we study the geometry and the orientation of plasmaspheric plumes by using a four-point analysis method, the spatial gradient. We also compare several aspects of their motion as determined by different methods: (i) inner and outer plume boundary velocity calculated from time delays of this boundary observed by the wave experiment WHISPER on the four spacecraft, (ii) ion velocity derived from the ion spectrometer CIS onboard CLUSTER, (iii) drift velocity measured by the electron drift instrument ED1 onboard CLUSTER and (iv) global velocity determined from successive EUV images. These different techniques consistently indicate that plasmaspheric plumes rotate around the Earth, with their foot fully co-rotating, but with their tip rotating slower and moving farther out.

  4. Analysis of plasmaspheric plumes: CLUSTER and IMAGE observations and numerical simulations

    Science.gov (United States)

    Darouzet, Fabien; DeKeyser, Johan; Decreau, Pierrette; Gallagher, Dennis; Pierrard, Viviane; Lemaire, Joseph; Dandouras, Iannis; Matsui, Hiroshi; Dunlop, Malcolm; Andre, Mats

    2005-01-01

    Plasmaspheric plumes have been routinely observed by CLUSTER and IMAGE. The CLUSTER mission provides high time resolution four-point measurements of the plasmasphere near perigee. Total electron density profiles can be derived from the plasma frequency and/or from the spacecraft potential (note that the electron spectrometer is usually not operating inside the plasmasphere); ion velocity is also measured onboard these satellites (but ion density is not reliable because of instrumental limitations). The EUV imager onboard the IMAGE spacecraft provides global images of the plasmasphere with a spatial resolution of 0.1 RE every 10 minutes; such images acquired near apogee from high above the pole show the geometry of plasmaspheric plumes, their evolution and motion. We present coordinated observations for 3 plume events and compare CLUSTER in-situ data (panel A) with global images of the plasmasphere obtained from IMAGE (panel B), and with numerical simulations for the formation of plumes based on a model that includes the interchange instability mechanism (panel C). In particular, we study the geometry and the orientation of plasmaspheric plumes by using a four-point analysis method, the spatial gradient. We also compare several aspects of their motion as determined by different methods: (i) inner and outer plume boundary velocity calculated from time delays of this boundary observed by the wave experiment WHISPER on the four spacecraft, (ii) ion velocity derived from the ion spectrometer CIS onboard CLUSTER, (iii) drift velocity measured by the electron drift instrument ED1 onboard CLUSTER and (iv) global velocity determined from successive EUV images. These different techniques consistently indicate that plasmaspheric plumes rotate around the Earth, with their foot fully co-rotating, but with their tip rotating slower and moving farther out.

  5. Simulation of EMIC growth and propagation within the plasmaspheric plume density irregularities

    Science.gov (United States)

    de Soria-Santacruz Pich, M.; Spasojevic, M.

    2012-12-01

    In situ data from the Magnetospheric Plasma Analyzer (MPA) instruments onboard the LANL spacecraft are used to study the growth and propagation of electromagnetic ion cyclotron (EMIC) waves in the presence of cold plasma irregularities in the plasmaspheric plume. The data corresponds to the 9 June 2001 event, a period of moderate geomagnetic activity with highly irregular density structure within the plume as measured by the MPA instrument at geosynchoronus orbit. Theory and observations suggest that EMIC waves are responsible for energetic proton precipitation, which is stronger during geomagnetically disturbed intervals. These waves propagate below the proton gyrofrequency, and they appear in three frequency bands due to the presence of heavy ions, which strongly modify wave propagation characteristics. These waves are generated by ion cyclotron instability of ring current ions, whose temperature anisotropy provides the free energy required for wave growth. Growth maximizes for field-aligned propagation near the equatorial plane where the magnetic field gradient is small. Although the wave's group velocity typically stays aligned with the geomagnetic field direction, wave-normal vectors tend to become oblique due to the curvature and gradient of the field. On the other hand, radial density gradients have the capability of guiding the waves and competing against the magnetic field effect thus favoring wave growth conditions. In addition, enhanced cold plasma density reduces the proton resonant energy where higher fluxes are available for resonance, and hence explaining why wave growth is favored at higher L-shell regions where the ratio of plasma to cyclotron frequency is larger. The Stanford VLF 3D Raytracer is used together with path-integrated linear growth calculations to study the amplification and propagation characteristics of EMIC waves within the plasmaspheric plume formed during the 9 June 2001 event. Cold multi-ion plasma is assumed for raytracing

  6. Resonant Scattering of Relativistic Outer Zone Electrons by Plasmaspheric Plume Electromagnetic Ion Cyclotron Waves

    Institute of Scientific and Technical Information of China (English)

    SU Zhen-Peng; ZHENG Hui-Nan

    2009-01-01

    The bounce-averaged Fokker-Planck equation is solved to study the relativistic electron phase space density(PSD)evolution in the outer radiation belt due to resonant interactions with plasmaspheric plume electromagnetic ion cyclotron(EMIC)waves.It is found that the PSDs of relativistic electrons can be depleted by 1-3 orders of magnitude in 5h,supporting the previous finding that resonant interactions with EMIC waves may account for the frequently observed relativistic electron flux dropouts in the outer radiation belt during the main phase of a storm.The significant precipitation Joss of ~Me V electrons is primarily induced by the EMIC waves in H~+ and He~+ bands.The rapid remove of highly relativistic electrons(>5 MeV)is mainly driven by the EMIC waves in O~+ band at lower pitch-angles,as well as the EMIC waves in H~+ and He~+ bands at larger pitch-angles.Moreover,a stronger depletion of relativistic electrons is found to occur over a wider pitch angle range when EMIC waves are centering relatively higher in the band.

  7. Sediment plume response to surface melting and supraglacial lake drainages on the Greenland ice sheet

    DEFF Research Database (Denmark)

    Chu, Vena W.; Smith, Laurence C; Rennermalm, Asa K.

    2009-01-01

    of a downstream sediment plume in Kangerlussuaq Fjord by comparing: (1) plume area and suspended sediment concentration from Moderate Resolution Imaging Spectroradiometer (MODIS) imagery and field data; (2) ice-sheet melt extent from Special Sensor Microwave/Imager (SSM/I) passive microwave data; and (3......) supraglacial lake drainage events from MODIS. Results confirm that the origin of the sediment plume is meltwater release from the ice sheet. Interannual variations in plume area reflect interannual variations in surface melting. Plumes appear almost immediately with seasonal surface-melt onset, provided...... the estuary is free of landfast sea ice. A seasonal hysteresis between melt extent and plume area suggests late-season exhaustion in sediment supply. Analysis of plume sensitivity to supraglacial events is less conclusive, with 69% of melt pulses and 38% of lake drainage events triggering an increase in plume...

  8. Sediment plume response to surface melting and supraglacial lake drainages on the Greenland ice sheet

    DEFF Research Database (Denmark)

    Chu, Vena W.; Smith, Laurence C; Rennermalm, Asa K.

    2009-01-01

    Increased mass losses from the Greenland ice sheet and inferred contributions to sea-level rise have heightened the need for hydrologic observations of meltwater exiting the ice sheet. We explore whether temporal variations in ice-sheet surface hydrology can be linked to the development of a down...... area. We conclude that remote sensing of sediment plume behavior offers a novel tool for detecting the presence, timing and interannual variability of meltwater release from the ice sheet....... of a downstream sediment plume in Kangerlussuaq Fjord by comparing: (1) plume area and suspended sediment concentration from Moderate Resolution Imaging Spectroradiometer (MODIS) imagery and field data; (2) ice-sheet melt extent from Special Sensor Microwave/Imager (SSM/I) passive microwave data; and (3......) supraglacial lake drainage events from MODIS. Results confirm that the origin of the sediment plume is meltwater release from the ice sheet. Interannual variations in plume area reflect interannual variations in surface melting. Plumes appear almost immediately with seasonal surface-melt onset, provided...

  9. Density structures inside the plasmasphere: Cluster observations

    DEFF Research Database (Denmark)

    Darrouzet, F.; Decreau, P.M.E.; De Keyser, J.;

    2004-01-01

    The electron density profiles derived from the EFW and WHISPER instruments on board the four Cluster spacecraft reveal density structures inside the plasmasphere and at its outer boundary, the plasmapause. We have conducted a statistical study to characterize these density structures. We focus...... on the plasmasphere crossing on I I April 2002, during which Cluster observed several density irregularities inside the plasmasphere, as well as a plasmaspheric plume. We derive the density gradient vectors from simultaneous density measurements by the four spacecraft. We also determine the normal velocity...... of the boundaries of the plume and of the irregularities from the time delays between those boundaries in the four individual density profiles, assuming they are planar. These new observations yield novel insights about the occurrence of density irregularities, their geometry and their dynamics. These in...

  10. The Plasmasphere Boundary Layer

    Directory of Open Access Journals (Sweden)

    D. L. Carpenter

    2004-12-01

    Full Text Available As an inner magnetospheric phenomenon the plasmapause region is of interest for a number of reasons, one being the occurrence there of geophysically important interactions between the plasmas of the hot plasma sheet and of the cool plasmasphere. There is a need for a conceptual framework within which to examine and discuss these interactions and their consequences, and we therefore suggest that the plasmapause region be called the Plasmasphere Boundary Layer, or PBL. Such a term has been slow to emerge because of the complexity and variability of the plasma populations that can exist near the plasmapause and because of the variety of criteria used to identify the plasmapause in experimental data. Furthermore, and quite importantly in our view, a substantial obstacle to the consideration of the plasmapause region as a boundary layer has been the longstanding tendency of textbooks on space physics to limit introductory material on the plasmapause phenomenon to zeroth order descriptions in terms of ideal MHD theory, thus implying that the plasmasphere is relatively well understood. A textbook may introduce the concept of shielding of the inner magnetosphere from perturbing convection electric fields, but attention is not usually paid to the variety of physical processes reported to occur in the PBL, such as heating, instabilities, and fast longitudinal flows, processes which must play roles in plasmasphere dynamics in concert with the flow regimes associated with the major dynamo sources of electric fields. We believe that through the use of the PBL concept in future textbook discussions of the plasmasphere and in scientific communications, much progress can be made on longstanding questions about the physics involved in the formation of the plasmapause and in the cycles of erosion and recovery of the plasmasphere.

    Key words. Magnetospheric physics (plasmasphere; plasma convection; MHD waves and instabilities

  11. Detection of a plasmaspheric wind in the Earth's magnetosphere by the Cluster spacecraft

    Directory of Open Access Journals (Sweden)

    I. Dandouras

    2013-07-01

    Full Text Available Plumes, forming at the plasmapause and released outwards, constitute a well-established mode for plasmaspheric material release to the Earth's magnetosphere. They are associated to active periods and the related electric field change. In 1992, Lemaire and Shunk proposed the existence of an additional mode for plasmaspheric material release to the Earth's magnetosphere: a plasmaspheric wind, steadily transporting cold plasmaspheric plasma outwards across the geomagnetic field lines, even during prolonged periods of quiet geomagnetic conditions. This has been proposed on a theoretical basis. Direct detection of this wind has, however, eluded observation in the past. Analysis of ion measurements, acquired in the outer plasmasphere by the CIS experiment onboard the four Cluster spacecraft, provide now an experimental confirmation of the plasmaspheric wind. This wind has been systematically detected in the outer plasmasphere during quiet and moderately active conditions, and calculations show that it could provide a substantial contribution to the magnetospheric plasma populations outside the Earth's plasmasphere. Similar winds should also exist on other planets, or astrophysical objects, quickly rotating and having an atmosphere and a magnetic field.

  12. ASSESSMENT OF PLUME DIVING

    Science.gov (United States)

    This presentation presents an assessment of plume diving. Observations included: vertical plume delineation at East Patchogue, NY showed BTEX and MTBE plumes sinking on either side of a gravel pit; Lake Druid TCE plume sank beneath unlined drainage ditch; and aquifer recharge/dis...

  13. Unsolved problems in plasmasphere refilling

    Science.gov (United States)

    Gallagher, D. L.; Comfort, R. H.

    2016-02-01

    The plasmasphere is a cold (~1 eV) plasma at middle to low magnetic latitudes surrounding the Earth. Its shape is dominated by Earth's magnetic field and its cross-field motion is dominated by electric fields. It is a highly coupled part of the inner magnetosphere. Storm time conditions erode the outer plasmasphere, transporting that plasma into the dayside magnetosheath region, leaving behind a region of greatly reduced plasma density that will refill from ionospheric outflow. The processes involved in refilling remain incompletely understood. In this commentary, outstanding questions about plasmaspheric refilling are summarized in the context of recent publications.

  14. Calculation of the extreme ultraviolet radiation of the earth’s plasmasphere

    Institute of Scientific and Technical Information of China (English)

    FOK; Mei-Ching

    2010-01-01

    The dynamic global core plasma model(DGCPM) is used in this paper to calculate the He+ density distribution of the Earth’s plasmasphere and to investigate the configurations and 30.4 nm radiation properties of the plasmasphere.Validation comparisons between the simulation results and IMAGE mission observations show:That the equatorial structure of the plasmapause is mainly located near 5.5 RE and the typical scale of plasmasphere shrinking or expansion within 10 min is approximately 0.1 RE;that the plasmaspheric shoulders are formed and rotate noon-ward from the dawn sector under the conditions of strong southward turning of the interplanetary magnetic field(IMF);that the plasmaspheric plumes will rotate dawn-ward from the night sector and become narrow for the southward turning of the IMF.The simulated images from the lunar orbit show that the plasmasphere locating within the geocentric distance of 5.5 RE corresponds to field of view(FOV) of 10.7°×10.7° for the moon-based EUV imager,and that the 30.4 nm radiation intensity of the plasmasphere is 0.1-11.4 R.The plasmaspheric shoulders and plumes locating toward the moon-side are for the first time simulated with typical scale level of 0.1 RE from the side view of the moon.These simulated results provide an important theoretical basis for the lunar-based EUV camera design.

  15. Saturn's ionosphere and plasmasphere

    Science.gov (United States)

    Moore, Luke Edward

    2008-01-01

    A number of puzzling phenomena were revealed when the Voyager spacecraft flew past Saturn in 1981 to measure the ionized portions (ionosphere) of its upper atmosphere (thermosphere). Most of these issues have remained unexplained in the intervening 25 years due to a lack of conclusive observational data. With the arrival of Cassini at Saturn in July 2004, however, a new era of observations began, providing the promise of fresh evidence and demanding the development of a contemporary theoretical framework in order to re-examine old mysteries and understand new discoveries. This dissertation presents studies of Saturn's ionosphere and inner plasmasphere based on new time-dependent photochemical and diffusive transport models that solve the ion equations of continuity in one dimension. Calculations are conducted within the overall framework of a self-consistent, three-dimensional general circulation model (GCM) of Saturn's thermosphere, and the results of these studies are combined with GCM results to provide the building blocks of a new comprehensive model, the Saturn-Thermosphere- Ionosphere-Model (STIM). The one-dimensional model calculations are used to constrain and investigate a number of unresolved issues and to make testable predictions based on those investigations. Five primary topics are addressed: (1) the additional loss processes required to bring predicted electron densities into agreement with observations, (2) the discrepancy between theory and observations regarding the diurnal variation of peak electron density, (3) the effects of shadowing by Saturn's rings on its ionosphere, (4) the yet unknown electron and ion temperatures at Saturn, and (5) the ionospheric contribution to Saturn's plasmasphere. The models show that a steady influx of water into Saturn's atmosphere--from its rings or icy satellites--is required to explain observed electron densities. Additionally, the time-variability of the water source may be the cause of frequently observed

  16. Whistler Wave Energy Flow in the Plasmasphere

    Science.gov (United States)

    Kletzing, Craig; Santolik, Ondrej; Kurth, William; Hospodarsky, George; Christopher, Ivar; Bounds, Scott

    2016-07-01

    The measured wave properties of plasmaspheric hiss are important to constrain models of the generation of hiss as well as its propagation and amplification. For example, the generation mechanism for plasmaspheric hiss has been suggested to come from one of three possible mechanisms: 1) local generation and amplification, 2) whistlers from lightning, and 3) chorus emissions which have refracted into the plasmasphere. The latter two mechanisms are external sources which produce an incoherent hiss signature as the original waves mix in a stochastic manner, propagating in both directions along the background magnetic field. In contrast, local generation of plasmaspheric hiss within the plasmasphere should produce a signature of waves propagating away from the source region. For all three mechanisms scattering of energetic particles into the loss cone transfers some energy from the particles to the waves. By examining the statistical characteristics of the Poynting flux of plasmaspheric hiss, we can determine the properties of wave energy flow in the plasmasphere. We report on the statistics of observations from the Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) Waves instrument on the Van Allen Probes for periods when the spacecraft is inside the plasmasphere. We find that the Poynting flux associated with plasmaspheric hiss has distinct and unexpected radial structure which shows that there can be significant energy flow towards the magnetic equator. We show the properties of this electromagnetic energy flow as a function of position and frequency.

  17. Physics-based models of the plasmasphere

    Energy Technology Data Exchange (ETDEWEB)

    Jordanova, Vania K [Los Alamos National Laboratory; Pierrard, Vivane [BELGIUM; Goldstein, Jerry [SWRI; Andr' e, Nicolas [ESTEC/ESA; Kotova, Galina A [SRI, RUSSIA; Lemaire, Joseph F [BELGIUM; Liemohn, Mike W [U OF MICHIGAN; Matsui, H [UNIV OF NEW HAMPSHIRE

    2008-01-01

    We describe recent progress in physics-based models of the plasmasphere using the Auid and the kinetic approaches. Global modeling of the dynamics and inAuence of the plasmasphere is presented. Results from global plasmasphere simulations are used to understand and quantify (i) the electric potential pattern and evolution during geomagnetic storms, and (ii) the inAuence of the plasmasphere on the excitation of electromagnetic ion cyclotron (ElvIIC) waves a.nd precipitation of energetic ions in the inner magnetosphere. The interactions of the plasmasphere with the ionosphere a.nd the other regions of the magnetosphere are pointed out. We show the results of simulations for the formation of the plasmapause and discuss the inAuence of plasmaspheric wind and of ultra low frequency (ULF) waves for transport of plasmaspheric material. Theoretical formulations used to model the electric field and plasma distribution in the plasmasphere are given. Model predictions are compared to recent CLUSTER and MAGE observations, but also to results of earlier models and satellite observations.

  18. Refilling the plasmasphere through the exospheric sieve

    Science.gov (United States)

    Krall, J.; Huba, J.; Emmert, J. T.

    2016-12-01

    The ability to compute plasmasphere densities is critical to many space weather concerns. The sensitivity of refilling to the solar cycle is compelling because, paradoxically, refilling rates are generally lowest when the ionosphere is strongest. In the past, this has been attributed to a dearth of exosphere H at solar maximum. While H is needed to supply H + O+ -> H+ + O charge exchange, recent work demonstrates a significant sensitivity to O [1]. Results will be based on preliminary model-data comparisons using in situ Van Allen Probe EMFISIS data and the SAMI3 ionosphere/plasmasphere code. We will assess the impact of atmospheric composition (i.e., O and H) and solar activity (e.g., F10.7) on plasmasphere refilling rates and density following magnetic storms. SAMI3 (Sami3 is Also a Model of the Ionosphere) is a first-principles ionosphere/plasmasphere model. SAMI3 includes 7 ion species (H+, He+, O+, N+, O2+, N2+, NO+), each treated as a separate fluid, with temperature equations being solved for H+, He+, O+ and e- [2]. SAMI3 uses the empirical MSIS thermosphere/exosphere model to specify O and H densities. SAMI3 includes scaling factors that can be used to tune MSIS densities to bring them in line with measurements of satellite drag. Key inputs for this data-driven modeling are the thermosphere oxygen (O) and hydrogen (H) densities, and the F10.7 proxy for solar ultraviolet irradiance. [1 ]Krall, J., J. T. Emmert, F. Sassi, S. E. McDonald, and J. D. Huba (2016), Day-to-day variability in the thermosphere and its impact on plasmasphere refilling, J. Geophys. Res. Space Physics, 121, doi:10.1002/2015JA022328. [2] Huba, J. and J. Krall (2013), Modeling the plasmasphere with SAMI3, Geophys. Res. Lett., 40, 6-10, doi:10.1029/2012GL054300 Research supported by NRL base funds.

  19. Turbulent Plasmaspheric Boundary Layer: Observables and Consequences

    Science.gov (United States)

    Mishin, Evgeny

    2014-10-01

    In situ satellite observations reveal strong lower hybrid/fast magnetosonic turbulence and broadband hiss-like VLF waves in the substorm subauroral geospace at and earthward of the electron plasmasheet boundary. These coincide with subauroral ion drifts/polarization streams (SAID/SAPS) in the plasmasphere and topside ionosphere. SAID/SAPS appear in ~10 min after the substorm onset consistent with the fast propagation of substorm injection fronts. The SAID channel follows the dispersionless cutoff of the energetic electron flux at the plasmapause. This indicates that the cold plasma maintains charge neutrality within the channel, thereby short-circuiting the injected plasma jet (injection fronts over the plasmasphere. Plasma turbulence leads to the circuit resistivity and magnetic diffusion as well as significant electron heating and acceleration. As a result, a turbulent boundary layer forms between the inner edge of the electron plasmasheet and plasmasphere. The SAID/SAPS-related VLF emissions appear to constitute a distinctive subset of substorm/storm-related VLF activity in the region co-located with freshly injected energetic ions inside the plasmasphere. Significant pitch-angle diffusion coefficients suggest that substorm SAID/SAPS-related VLF waves could be responsible for the alteration of the outer radiation belt boundary during (sub)storms. Supported by the Air Force Office of Scientific Research.

  20. Evidence for Significant Local Generation of Plasmaspheric Hiss

    Science.gov (United States)

    Kletzing, C.; Kurth, W. S.; Bounds, S. R.; Hospodarsky, G. B.; Santolik, O.; Wygant, J. R.; Bonnell, J. W.; Omura, Y.; Summers, D.

    2014-12-01

    The source of plasmaspheric hiss has been an outstanding problem in inner magnetospheric radiation belt physics since the discovery of this whistler-mode emission. The generation mechanism for plasmaspheric hiss has been suggested to come from one of three possible mechanisms: 1) local generation and amplification, 2) whistlers from lightning, and 3) chorus emissions which have refracted into the plasmasphere. The latter two mechanisms are external sources which produce an incoherent hiss signature as the original waves mix in a stochastic manner, propagating in both directions along the background magnetic field. In contrast, local generation of plasmaspheric hiss within the plasmasphere should produce a signature of waves propagating away from the source region. We report observations from the Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) Waves insturment on the Van Allen Probes that clearly indicate that the Poynting flux associated with plasmaspheric hiss is frequently propagating away from the equator in the outer region of the plasmasphere. Initial statistics suggest that for more than 40% of the orbits of the Van Allen Probes, the plasmaspheric hiss is generated by a local source within the plasmasphere. We present examples of the signature of locally generated plasmaspheric hiss and show additional statistics of locally generated hiss occurrence.

  1. Banded electron structures in the plasmasphere

    Energy Technology Data Exchange (ETDEWEB)

    Burke, W.J.; Rubin, A.G.; Hardy, D.A.; Holeman, E.G.

    1995-05-01

    The low-energy plasma analyzer on CRRES has detected significant fluxes of 10-eV to 30-keV electrons trapped on plasmaspheric field lines. On energy versus time spectrograms these electrons appear as banded structures that can span the 2 < L < 6 range of magnetic shells. The authors present an example of banded electron structures, encountered in the nightside plasmasphere during the magnetically quiet January 30, 1991. Empirical analysis suggests that two clouds of low energy electrons were injected from the plasma sheet to L < 4 on January 26 and 27 while the convective electric field was elevated. The energies of electrons in the first cloud were greater than those in the second. DMSP F8 measurements show that after the second injection, the polar cap potential rapidly decreased from >50 to <20 kY. Subsequent encounters with the lower energy cloud on alternating CRRES orbits over the next 2 days showed a progressive, earthward movement of the electrons, inner boundary. Whistler and electron cyclotron harmonic emissions accompanied the most intense manifestations of cloud electrons. The simplest explanation of these measurements is that after initial injection, the AIfven boundary moved Outward, leaving the cloud electrons on closed drift paths. Subsequent fluctuations of the convective electric field penetrated the plasmasphere, transporting cloud elements inward. The magnetic shell distribution of electron temperatures in one of the banded structures suggests that radiative energy losses may be comparable in magnitude to gains due to adiabatic compression.

  2. A New Global Core Plasma Model of the Plasmasphere

    Science.gov (United States)

    Gallagher, D. L.; Comfort, R. H.; Craven, P. D.

    2014-01-01

    The Global Core Plasma Model (GCPM) is the first empirical model for thermal inner magnetospheric plasma designed to integrate previous models and observations into a continuous in value and gradient representation of typical total densities. New information about the plasmasphere, in particular, makes possible significant improvement. The IMAGE Mission Radio Plasma Imager (RPI) has obtained the first observations of total plasma densities along magnetic field lines in the plasmasphere and polar cap. Dynamics Explorer 1 Retarding Ion Mass Spectrometer (RIMS) has provided densities in temperatures in the plasmasphere for 5 ion species. These and other works enable a new more detailed empirical model of thermal in the inner magnetosphere that will be presented.

  3. Measurement and modeling of the refilling plasmasphere during 2001

    Science.gov (United States)

    Krall, J.; Huba, J. D.; Jordanova, V. K.; Denton, R. E.; Carranza, T.; Moldwin, M. B.

    2016-03-01

    The Naval Research Laboratory SAMI3 (Sami3 is Also a Model of the Ionosphere) and the RAM-CPL (Ring current Atmosphere interaction Model-Cold PLasma) codes are used to model observed plasmasphere dynamics during 25 November 2001 to 1 December 2001 and 1-5 February 2001. Model results compare well to plasmasphere observations of electron and mass densities. Comparison of model results to refilling data and to each other shows good agreement, generally within a factor of 2. We find that SAMI3 plasmaspheric refilling rates and ion densities are sensitive to the composition and temperature of the thermosphere and exosphere, and to photoelectron heating. Results also support our previous finding that the wind-driven dynamo significantly impacts both refilling rates and plasmasphere dynamics during quiet periods.

  4. The Influence of the Solar Cycle on Plasmasphere Refilling

    Science.gov (United States)

    Krall, J.; Huba, J.

    2015-12-01

    During refilling, ionospheric plasma streams into the inner magnetosphere from both the northern and southern hemispheres. Plasmasphere refilling rates depend on both the ionospheric sources and on the thermalization of streaming ions. We use the NRL SAMI3 ionosphere/plasmasphere code[1] coupled to the NRLMSIS empirical atmosphere model and the HWM14 empirical wind model, to simulate H+, He+ and O+ populations in the plasmasphere. The SAMI3 ionosphere code includes 7 ion species (H+, He+, O+, N+, O2+, N2+, NO+), each treated as a separate fluid, with temperature equations being solved for H+, He+, O+ and e. Measurements show that refilling rates decrease with increasing solar activity, an effect reproduced by SAMI3 and its two-dimensional cousin, SAMI2. We find that the refilling rate and the resulting the plasmasphere electron content are sensitive to the thermospheric composition and temperature, as well as photoelectron heating and photoproduction rates. Depending on conditions, simulations suggest that the plasmaspheric contribution to the total electron content can either increase or decrease with solar activity, as represented by the daily and 81-day-average F10.7 indices. [1] Huba, J. and J. Krall, 2013, ``Modeling the plasmasphere with SAMI3'', Geophys. Res. Lett. 40, 6--10, doi:10.1029/2012GL054300 Research supported by NRL base funds and the NASA HSR program.

  5. Analysis of the IMAGE RPI electron density data and CHAMP plasmasphere electron density reconstructions with focus on plasmasphere modelling

    Science.gov (United States)

    Gerzen, T.; Feltens, J.; Jakowski, N.; Galkin, I.; Reinisch, B.; Zandbergen, R.

    2016-09-01

    The electron density of the topside ionosphere and the plasmasphere contributes essentially to the overall Total Electron Content (TEC) budget affecting Global Navigation Satellite Systems (GNSS) signals. The plasmasphere can cause half or even more of the GNSS range error budget due to ionospheric propagation errors. This paper presents a comparative study of different plasmasphere and topside ionosphere data aiming at establishing an appropriate database for plasmasphere modelling. We analyze electron density profiles along the geomagnetic field lines derived from the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) satellite/Radio Plasma Imager (RPI) records of remote plasma sounding with radio waves. We compare these RPI profiles with 2D reconstructions of the topside ionosphere and plasmasphere electron density derived from GNSS based TEC measurements onboard the Challenging Minisatellite Payload (CHAMP) satellite. Most of the coincidences between IMAGE profiles and CHAMP reconstructions are detected in the region with L-shell between 2 and 5. In general the CHAMP reconstructed electron densities are below the IMAGE profile densities, with median of the CHAMP minus IMAGE residuals around -588 cm-3. Additionally, a comparison is made with electron densities derived from passive radio wave RPI measurements onboard the IMAGE satellite. Over the available 2001-2005 period of IMAGE measurements, the considered combined data from the active and passive RPI operations cover the region within a latitude range of ±60°N, all longitudes, and an L-shell ranging from 1.2 to 15. In the coincidence regions (mainly 2 ⩽ L ⩽ 4), we check the agreement between available active and passive RPI data. The comparison shows that the measurements are well correlated, with a median residual of ∼52 cm-3. The RMS and STD values of the relative residuals are around 22% and 21% respectively. In summary, the results encourage the application of IMAGE RPI data for

  6. The story of plumes: the development of a new conceptual framework for understanding magnetosphere and ionosphere coupling

    Science.gov (United States)

    Moldwin, Mark B.; Zou, Shasha; Heine, Tom

    2016-12-01

    The name "plume" has been given to a variety of plasma structures in the Earth's magnetosphere and ionosphere. Some plumes (such as the plasmasphere plume) represent elevated plasma density, while other plumes (such as the equatorial F region plume) represent low-density regions. Despite these differences these structures are either directly related or connected in the causal chain of plasma redistribution throughout the system. This short review defines how plumes appear in different measurements in different regions and describes how plumes can be used to understand magnetosphere-ionosphere coupling. The story of the plume family helps describe the emerging conceptual framework of the flow of high-density-low-latitude ionospheric plasma into the magnetosphere and clearly shows that strong two-way coupling between ionospheric and magnetospheric dynamics occurs not only in the high-latitude auroral zone and polar cap but also through the plasmasphere. The paper briefly reviews, highlights and synthesizes previous studies that have contributed to this new understanding.

  7. Whistlers Observed Outside the Plasmasphere: Correlation to Plasmaspheric/Plasmapause Features and Implications for the Scattering of Radiation-Belt Electrons

    Science.gov (United States)

    Adrian, Mark L.; Gallagher, D. L.

    2007-01-01

    Magnetospherically reflected, lightning-generated whistler waves are an important potential contributor to pitch-angle scattering loss processes of the electron radiation belts. While lightning-generated whistlers are a common feature at, and just inside, the plasmapause, they are infrequently observed outside the plasmasphere. As such, their potential contribution to outer radiation belt loss processes is more tenuous. Recently, Platino et al. [2005] has reported on whistlers observed outside the plasmasphere by Cluster. Here, we present correlative global observations of the plasmasphere, for the reported periods of Cluster-observed whistlers outside the plasmasphere, using IMAGE-EUV data. The intent of this study is to seek the underlying mechanisms that result in whistlers outside the plasmasphere and consequently the anticipated morphology and significance these waves may have on radiation belt dynamics.

  8. Storm-Time Strong Field-Aligned Ion Upflow in Region of the SED Plume

    Institute of Scientific and Technical Information of China (English)

    YUAN Zhi-Gang; DENG Xiao-Hua; WANG Jing-Fang

    2008-01-01

    report the observations from the GPS TEC and DMSP F-13 satellites showing that very strong upward field-aligned (FA) ion velocity and flux in the outer region of the storm-enhanced density (SED) occurred in the event of the geomagnetic storm on 29-31 May 2003. By a method of coordinate transformation, upward FA ion velocities in excess of 250m/s are obtained from the observations of the DMSP F-13 satellite. Further, an FA ion flux is estimated to be about 4.5×1013ions/m2s in the dusk sector. The estimated FA ion velocity and flux provide a powerful direct proof to support the scenario that there is a strong coupling of particles between the ionosphere and plasmasphere in the region of the SED plume. In the process, FA ion flux transports from the ionosphere to the plasmasphere in the region of the SED plume. Therefore, the plume of SED in the ionosphere provides an important source to the enhanced density of O+ in the storm-time plasmasphere.

  9. Response of plasmaspheric configuration to substorms revealed by Chang’e 3

    Science.gov (United States)

    He, Han; Shen, Chao; Wang, Huaning; Zhang, Xiaoxin; Chen, Bo; Yan, Jun; Zou, Yongliao; Jorgensen, Anders M.; He, Fei; Yan, Yan; Zhu, Xiaoshuai; Huang, Ya; Xu, Ronglan

    2016-08-01

    The Moon-based Extreme Ultraviolet Camera (EUVC) of the Chang’e 3 mission provides a global and instantaneous meridian view (side view) of the Earth’s plasmasphere. The plasmasphere is one inner component of the whole magnetosphere, and the configuration of the plasmasphere is sensitive to magnetospheric activity (storms and substorms). However, the response of the plasmaspheric configuration to substorms is only partially understood, and the EUVC observations provide a good opportunity to investigate this issue. By reconstructing the global plasmaspheric configuration based on the EUVC images observed during 20–22 April 2014, we show that in the observing period, the plasmasphere had three bulges which were located at different geomagnetic longitudes. The inferred midnight transit times of the three bulges, using the rotation rate of the Earth, coincide with the expansion phase of three substorms, which implies a causal relationship between the substorms and the formation of the three bulges on the plasmasphere. Instead of leading to plasmaspheric erosion as geomagnetic storms do, substorms initiated on the nightside of the Earth cause local inflation of the plasmasphere in the midnight region.

  10. Plasmaspheric trough evolution under different conditions of subauroral ion drift

    Institute of Scientific and Technical Information of China (English)

    HE Fei; ZHANG XiaoXin; CHEN Bo; FOK MeiChing

    2012-01-01

    The statistical characteristics of the subauroral ion drift (SAID) in the ionosphere and the plasmaspheric trough evolution under different conditions of SAID were investigated in this paper,based on 566 SAID events observed by Akebono,Astrid-2,DE-2,and Freja satellites.The relationships between the latitudinal location of SAID and the Kp,AL,and Dst indices for these events were also discussed.It was found that the SAID events happened mainly at invariant latitude (ILAT) of 60.4° and magnetic local time (MLT) of 21.6 MLT and that 92.4% of the events happened when the Kp index was below 5.0,indicating a medium geomagnetic activity.The latitudinal half-width of SAID varied from 0.5° to 3.0° with a typical half-width of 1.0°.The SAID would happen at low latitudes if the geomagnetic activity was high.The effects of SAID on equatorial outer plasmasphere trough evolutions were studied with the dynamic global core plasma model (DGCPM) driven by the statistical results of SAID signatures.It was noted that locations,shapes and density of troughs vary with ILAT,MLT,latitudinal width,cross polar cap potential and lifetime of SAID events.The evolution of a trough is determined by the extent of SAID electric field penetrating into plasmasphere and not all SAID events can result in trough formations.

  11. Improved analysis of plasmasphere motion using the VLA radio interferometer

    Directory of Open Access Journals (Sweden)

    G. W. Hoogeveen

    Full Text Available Observations using the very large (VLA radio interferometer during the past five years have enabled the discovery of a new type of plasmasphere disturbance, the magnetic eastward-directed wave. Previous work indicated these disturbances were likely frozen to the geomagnetic field as determined from their azimuth distributions. This work provides a method to explain more accurately the azimuth distribution, thereby allowing the calculation of the disturbances' location in the plasmasphere independently of the measured velocity. The measurable velocity due to corotation is calculated and subtracted from the measured trace velocity. This difference, or deviation from corotation, is attributed to electrodynamic convection; the measurement of plasmaspheric convection may lead to the eventual monitoring of mid-latitude electric fields. Disturbances are seen convecting predominantly westward, with the fastest having angular velocities greater than the anticorotating VLA line of sight. The direction of convection and conditions of observations indicate that the disturbances are likely the same phenomenon seen by the Los Alamos satellite beacon array.

  12. On the Origin of Whistler Mode Radiation in the Plasmasphere

    Science.gov (United States)

    Green, James L.; Boardsen, Scott; Garcia, Leonard; Taylor, W. W. L.; Fung, Shing F.; Reinisch, B. W.

    2004-01-01

    The origin of whistler mode radiation in the plasmasphere is examined from three years of plasma wave observations from the Dynamics Explorer and three years from the Imager for Magnetopause-to-Aurora Global Exploration (IMAGE) spacecraft. These data are used to construct plasma wave intensity maps of whistler mode radiation in the plasmasphere. The highest average intensities of the radiation in the wave maps show source locations and/or sites of wave amplification. Each type of emission is classified based on its magnetic latitude and longitude rather than any spectral feature. Equatorial electromagnetic (EM) emissions (approx. 30-330 Hz), plasmaspheric hiss (approx. 330 Hz - 3.3 kHz), chorus (approx. 2 kHz - 6 kHz), and VLF transmitters (approx. 10-50 kHz) are the main types of waves that are clearly delineated in the plasma wave maps. Observations of the equatorial EM emissions show that the most intense region is on or near the magnetic equator in the afternoon sector and that during times of negative B(sub z) (interplanetary magnetic field),the maximum intensity moves from L values of 3 to less than 2. These observations are consistent with the origin of this emission being particle-wave interactions in or near the magnetic equator. Plasmaspheric hiss shows high intensity at high latitudes and low altitudes (L shells from 2 to 4) and in the magnetic equator over L values from 2 to 3 in the early afternoon sector. The longitudinal distribution of the hiss intensity (excluding the enhancement at the equator) is similar to the distribution of lightning: stronger over continents than over the ocean, stronger in the summer than winter, and stronger on the dayside than nightside. These observations strongly support lightning as the dominant source for plasmaspheric hiss, which through particle-wave interactions, maintains the slot region in the radiation belts. The enhancement of hiss at the magnetic equator is consistent with particle-wave interactions. The chorus

  13. Driving Plasmaspheric Electron Density Simulations During Geomagnetic Storms

    Science.gov (United States)

    De Pascuale, S.; Kletzing, C.; Jordanova, V.; Goldstein, J.; Wygant, J. R.; Thaller, S. A.

    2015-12-01

    We test global convection electric field models driving plasmaspheric electron density simulations (RAM-CPL) during geomagnetic storms with in situ measurements provided by the Van Allen Probes (RBSP). RAM-CPL is the cold plasma component of the ring-current atmosphere interactions suite (RAM-SCB) and describes the evolution of plasma density in the magnetic equatorial plane near Earth. Geomagnetic events observed by the RBSP satellites in different magnetic local time (MLT) sectors enable a comparison of local asymmetries in the input electric field and output densities of these simulations. Using a fluid MHD approach, RAM-CPL reproduces core plasmaspheric densities (L<4) to less than 1 order of magnitude difference. Approximately 80% of plasmapause crossings, defined by a low-density threshold, are reproduced to within a mean radial difference of 0.6 L. RAM-CPL, in conjunction with a best-fit driver, can be used in other studies as an asset to predict density conditions in locations distant from RBSP orbits of interest.

  14. Wave-Particle Interactions in the Turbulent Plasmaspheric Boundary Layer

    Science.gov (United States)

    Mishin, Evgeny

    2012-10-01

    We present in situ satellite observations of plasmaspheric lower hybrid/fast magnetosonic turbulence and broadband hiss-like VLF emissions related with substorm subauroral ion drifts/polarization streams (SAID/SAPS) in the magnetosphere and topside ionosphere. SAID/SAPS appear in ˜10 min after the substorm onset consistent with the fast propagation of substorm injection fronts. The SAID channel follows the dispersionless cutoff of the energetic electron flux at the plasmapause. This indicates that the cold plasma maintains charge neutrality within the channel, thereby short-circuiting the injected plasmoid (injection front) over the plasmasphere. As with the well-documented plasmoid-magnetic barrier problem, plasma turbulence ensures the circuit resistivity and magnetic diffusion as well as significant electron heating and acceleration. The SAID/SAPS-related VLF emissions were used to simulate interactions with the outer zone electrons. These emissions appear to constitute a distinctive subset of substorm/storm-related VLF activity in the region co-located with freshly injected energetic ions equatorward of the plasma sheet boundary. Significant pitch-angle diffusion coefficients suggest that substorm SAID/SAPS-related VLF waves could be responsible for the alteration of the outer radiation belt boundary during (sub)storms.

  15. Plasmaspheric H+, He+, O+, He++, and O++ Densities and Temperatures

    Science.gov (United States)

    Gallagher, D. L.; Craven, P. D.; Comfort H.

    2013-01-01

    Thermal plasmaspheric densities and temperatures for five ion species have recently become available, even though these quantities were derived some time ago from the Retarding Ion Mass Spectrometer onboard the Dynamics Explorer 1 satellite over the years 1981-1984. The quantitative properties will be presented. Densities are found to have one behavior with lessor statistical variation below about L=2 and another with much greater variability above that Lshell. Temperatures also have a behavior difference between low and higher L-values. The density ratio He++/H+ is the best behaved with values of about 0.2% that slightly increase with increasing L. Unlike the He+/H+ density ratio that on average decreases with increasing Lvalue, the O+/H+ and O++/H+ density ratios have decreasing values below about L=2 and increasing average ratios at higher L-values. Hydrogen ion temperatures range from about 0.2 eV to several 10s of eV for a few measurements, although the bulk of the observations are of temperatures below 3 eV, again increasing with L-value. The temperature ratios of He+/H+ are tightly ordered around 1.0 except for the middle plasmasphere between L=3.5 and 4.5 where He+ temperatures can be significantly higher. The temperatures of He++, O+, and O++ are consistently higher than H+.

  16. Plasmaspheric H+, He+, He++, O+, and O++ Densities and Temperatures

    Science.gov (United States)

    Gallagher, G. L.; Craven, P. D.; Comfort, R. H.

    2013-01-01

    Thermal plasmaspheric densities and temperatures for five ion species have recently become available, even though these quantities were derived some time ago from the Retarding Ion Mass Spectrometer onboard the Dynamics Explorer 1 satellite over the years 1981-1984. The quantitative properties will be presented. Densities are found to have one behavior with lessor statistical variation below about L=2 and another with much greater variability above that Lshell. Temperatures also have a behavior difference between low and higher L-values. The density ratio He++/H+ is the best behaved with values of about 0.2% that slightly increase with increasing L. Unlike the He+/H+ density ratio that on average decreases with increasing Lvalue, the O+/H+ and O++/H+ density ratios have decreasing values below about L=2 and increasing average ratios at higher L-values. Hydrogen ion temperatures range from about 0.2 eV to several 10s of eV for a few measurements, although the bulk of the observations are of temperatures below 3 eV, again increasing with L-value. The temperature ratios of He+/H+ are tightly ordered around 1.0 except for the middle plasmasphere between L=3.5 and 4.5 where He+ temperatures can be significantly higher. The temperatures of He++, O+, and O++ are consistently higher than H+.

  17. Ultra low frequency waves observed by Double Star TC-1 in the plasmasphere boundary layer

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The characteristic and properties of ULF waves in the plasmasphere boundary layer during two very quiet periods are present. The ULF waves were detected by Double Star TC-1 when the spacecraft passed through the plasmasphere in an outbound and inbound trajectories, respectively. A clear association between the ULF waves and periodic variations of energetic ions fluxes was observed. The ob-servations showed that the wave frequency was higher inside the plasmasphere than outside. The mechanism generating these ULF waves and possible diagnos-ing of the "classical plasmapause" location with the ULF wave were discussed.

  18. Investigating Plasmasphere Location during Relativistic Electron Precipitation Events

    Science.gov (United States)

    Woodger, L. A.; Millan, R. M.; Goldstein, J.; McCarthy, M. P.; Smith, D. M.; Sample, J. G.

    2006-12-01

    The plasmasphere plays a crucial role in the generation of different wave modes and their resonance conditions with radiation belt relativistic electrons. Meredith's (et. al., 2003) statistical study of resonant conditions for >2MeV electrons with EMIC waves found that the majority of these events occur in the vicinity of the plasmpause. The MAXIS and MINIS balloon observations found a distinct class of relativistic electron precipitation occurring at dusk, suggesting EMIC waves as a possible precipitation mechanism. We investigate the location of these relativistic electron precipitation events with respect to the plasmapause using data from IMAGE EUV, POLAR EFI, and a plasmapause test particle simulation driven by an electric field model with terms representing solar-wind-driven convection and ring-current-ionospheric coupling.

  19. The 2016 Case for Mantle Plumes and a Plume-Fed Asthenosphere (Augustus Love Medal Lecture)

    Science.gov (United States)

    Morgan, Jason P.

    2016-04-01

    discrepancies between idealized plume/hotspot models and geochronological observations will also be briefly discussed. A further consequence of the existence of strong deep mantle plumes is that hot plume material should preferentially pond at the base of the lithosphere, draining towards and concentrating beneath the regions where the lithosphere is thinnest, and asthenosphere is being actively consumed to make new tectonic plates - mid-ocean ridges. This plume-fed asthenosphere hypothesis makes predictions for the structure of asthenosphere flow and anisotropy, patterns of continental edge-volcanism linked to lateral plume drainage at continental margins, patterns of cratonic uplift and subsidence linked to passage from hotter plume-influenced to cooler non-plume-influenced regions of the upper mantle, and variable non-volcanic versus volcanic modes of continental extension linked to rifting above '~1425K cool normal mantle' versus 'warm plume-fed asthenosphere' regions of upper mantle. These will be briefly discussed. My take-home message is that "Mantle Plumes are almost certainly real". You can safely bet they will be part of any successful paradigm for the structure of mantle convection. While more risky, I would also recommend betting on the potential reality of the paradigm of a plume-fed asthenosphere. This is still a largely unexplored subfield of mantle convection. Current observations remain very imperfect, but seem more consistent with a plume-fed asthenosphere than with alternatives, and computational and geochemical advances are making good, falsifiable tests increasingly feasible. Make one!

  20. Evolution of chorus emissions into plasmaspheric hiss observed by Van Allen Probes

    Science.gov (United States)

    Zhou, Qinghua; Xiao, Fuliang; Yang, Chang; Liu, Si; He, Yihua; Wygant, J. R.; Baker, D. N.; Spence, H. E.; Reeves, G. D.; Funsten, H. O.

    2016-05-01

    The two classes of whistler mode waves (chorus and hiss) play different roles in the dynamics of radiation belt energetic electrons. Chorus can efficiently accelerate energetic electrons, and hiss is responsible for the loss of energetic electrons. Previous studies have proposed that chorus is the source of plasmaspheric hiss, but this still requires an observational confirmation because the previously observed chorus and hiss emissions were not in the same frequency range in the same time. Here we report simultaneous observations form Van Allen Probes that chorus and hiss emissions occurred in the same range ˜300-1500 Hz with the peak wave power density about 10-5 nT2/Hz during a weak storm on 3 July 2014. Chorus emissions propagate in a broad region outside the plasmapause. Meanwhile, hiss emissions are confined inside the plasmasphere, with a higher intensity and a broader area at a lower frequency. A sum of bi-Maxwellian distribution is used to model the observed anisotropic electron distributions and to evaluate the instability of waves. A three-dimensional ray tracing simulation shows that a portion of chorus emission outside the plasmasphere can propagate into the plasmasphere and evolve into plasmaspheric hiss. Moreover, hiss waves below 1 kHz are more intense and propagate over a broader area than those above 1 kHz, consistent with the observation. The current results can explain distributions of the observed hiss emission and provide a further support for the mechanism of evolution of chorus into hiss emissions.

  1. A two-dimensional model of the plasmasphere - Refilling time constants

    Science.gov (United States)

    Rasmussen, Craig E.; Guiter, Steven M.; Thomas, Steven G.

    1993-01-01

    A 2D model of the plasmasphere has been developed to study the temporal evolution of plasma density in the equatorial plane of the magnetosphere. This model includes the supply and loss of hydrogen ions due to ionosphere-magnetosphere coupling as well as the effects of E x B convection. A parametric model describing the required coupling fluxes has been developed which utilizes empirical models of the neutral atmosphere, the ionosphere and the saturated plasmasphere. The plasmaspheric model has been used to examine the time it takes for the plasmasphere to refill after it has been depleted by a magnetic storm. The time it takes for the plasmasphere to reach 90 percent of its equilibrium level ranges from 3 days at L = 3 during solar minimum to as high as 100 days at L = 5 during solar maximum. Refilling is also dependent on the month of the year, with refilling requiring a longer period of time at solar maximum during June than during December for L greater than 3.2.

  2. Formation of plasmasphere in the non-ideal corotation field

    Science.gov (United States)

    Dumin, Yurii

    It is well-known that the standard model of plasmasphere formation by the combined action of convection and the ideal corotation fields is too simplified and does not describe some important features. One of attempts to improve it was undertaken a few years ago in our paper [1], where we considered generation of the corotation field in the strongly-anisotropic magnetospheric plasma and took into account distortion of this field in high latitudes due to escape of the polarization charges along the open magnetic field lines. In the present report, we further develop the idea of refinement of the corotation field, particularly, by the consideration of the magnetic dipole inclined with respect to the rotation axis. It will be shown that all the above-mentioned improvements result in the more adequate description of the position of plasmapause both in the quiet and disturbed conditions. References: 1. Yu.V. Dumin. The Corotation Field in Collisionless Magnetospheric Plasma and Its Influence on Average Electric Field in the Lower Atmosphere. Advances in Space Research, v.30, p.2209 (2002).

  3. Real-time imaging of density ducts between the plasmasphere and ionosphere

    CERN Document Server

    Loi, Shyeh Tjing; Cairns, Iver H; Menk, Frederick W; Waters, Colin L; Erickson, Philip J; Trott, Cathryn M; Hurley-Walker, Natasha; Morgan, John; Lenc, Emil; Offringa, Andre R; Bell, Martin E; Ekers, Ronald D; Gaensler, B M; Lonsdale, Colin J; Feng, Lu; Hancock, Paul J; Kaplan, David L; Bernardi, G; Bowman, J D; Briggs, F; Cappallo, R J; Deshpande, A A; Greenhill, L J; Hazelton, B J; Johnston-Hollitt, M; McWhirter, S R; Mitchell, D A; Morales, M F; Morgan, E; Oberoi, D; Ord, S M; Prabu, T; Shankar, N Udaya; Srivani, K S; Subrahmanyan, R; Tingay, S J; Wayth, R B; Webster, R L; Williams, A; Williams, C L

    2015-01-01

    Ionization of the Earth's atmosphere by sunlight forms a complex, multi-layered plasma environment within the Earth's magnetosphere, the innermost layers being the ionosphere and plasmasphere. The plasmasphere is believed to be embedded with cylindrical density structures (ducts) aligned along the Earth's magnetic field, but direct evidence for these remains scarce. Here we report the first direct wide-angle observation of an extensive array of field-aligned ducts bridging the upper ionosphere and inner plasmasphere, using a novel ground-based imaging technique. We establish their heights and motions by feature-tracking and parallax analysis. The structures are strikingly organized, appearing as regularly-spaced, alternating tubes of overdensities and underdensities strongly aligned with the Earth's magnetic field. These findings represent the first direct visual evidence for the existence of such structures.

  4. Global MHD modeling of resonant ULF waves: Simulations with and without a plasmasphere

    Science.gov (United States)

    Claudepierre, S. G.; Toffoletto, F. R.; Wiltberger, M.

    2016-01-01

    We investigate the plasmaspheric influence on the resonant mode coupling of magnetospheric ultralow frequency (ULF) waves using the Lyon-Fedder-Mobarry (LFM) global magnetohydrodynamic (MHD) model. We present results from two different versions of the model, both driven by the same solar wind conditions: one version that contains a plasmasphere (the LFM coupled to the Rice Convection Model, where the Gallagher plasmasphere model is also included) and another that does not (the stand-alone LFM). We find that the inclusion of a cold, dense plasmasphere has a significant impact on the nature of the simulated ULF waves. For example, the inclusion of a plasmasphere leads to a deeper (more earthward) penetration of the compressional (azimuthal) electric field fluctuations, due to a shift in the location of the wave turning points. Consequently, the locations where the compressional electric field oscillations resonantly couple their energy into local toroidal mode field line resonances also shift earthward. We also find, in both simulations, that higher-frequency compressional (azimuthal) electric field oscillations penetrate deeper than lower frequency oscillations. In addition, the compressional wave mode structure in the simulations is consistent with a radial standing wave oscillation pattern, characteristic of a resonant waveguide. The incorporation of a plasmasphere into the LFM global MHD model represents an advance in the state of the art in regard to ULF wave modeling with such simulations. We offer a brief discussion of the implications for radiation belt modeling techniques that use the electric and magnetic field outputs from global MHD simulations to drive particle dynamics.

  5. Global MHD modeling of resonant ULF waves: Simulations with and without a plasmasphere.

    Science.gov (United States)

    Claudepierre, S G; Toffoletto, F R; Wiltberger, M

    2016-01-01

    We investigate the plasmaspheric influence on the resonant mode coupling of magnetospheric ultralow frequency (ULF) waves using the Lyon-Fedder-Mobarry (LFM) global magnetohydrodynamic (MHD) model. We present results from two different versions of the model, both driven by the same solar wind conditions: one version that contains a plasmasphere (the LFM coupled to the Rice Convection Model, where the Gallagher plasmasphere model is also included) and another that does not (the stand-alone LFM). We find that the inclusion of a cold, dense plasmasphere has a significant impact on the nature of the simulated ULF waves. For example, the inclusion of a plasmasphere leads to a deeper (more earthward) penetration of the compressional (azimuthal) electric field fluctuations, due to a shift in the location of the wave turning points. Consequently, the locations where the compressional electric field oscillations resonantly couple their energy into local toroidal mode field line resonances also shift earthward. We also find, in both simulations, that higher-frequency compressional (azimuthal) electric field oscillations penetrate deeper than lower frequency oscillations. In addition, the compressional wave mode structure in the simulations is consistent with a radial standing wave oscillation pattern, characteristic of a resonant waveguide. The incorporation of a plasmasphere into the LFM global MHD model represents an advance in the state of the art in regard to ULF wave modeling with such simulations. We offer a brief discussion of the implications for radiation belt modeling techniques that use the electric and magnetic field outputs from global MHD simulations to drive particle dynamics.

  6. Plume dynamics in heterogeneous porous media

    Science.gov (United States)

    Neufeld, Jerome A.; Huppert, Herbert E.

    2008-11-01

    Buoyancy driven flows in layered porous media are present in many geological settings and play an important role in the mixing of fluids, from the dispersal of pollutants in underground aquifers to enhanced oil recovery techniques and, of more recent importance, the sequestration of carbon dioxide (CO2). Seismic images of the rise of a buoyant CO2 plume at Sleipner in the North Sea indicate that these plumes are greatly influenced by a vertical array of thin lenses of relatively low permeability material. We model propagation of CO2 at each layer as a gravity current in a porous medium which propagates along, and drains through, a thin, low permeability seal. Drainage, driven both by hydrostatic pressure and the body force on the draining fluid, leads to an initial rapid advance followed by a gradual retreat of the current to a steady-state. By incorporating a vertical array of these single layer models we are able to capture the rise of the buoyant plume in layered reservoirs. We find that the plume is characterized by a broad head with a tail given by the steady state extent.

  7. [Little Dry Creek Drainage

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Map of the drainage boundary, direction of flow, canals and ditches, and streets for the drainage study plan and profile for Little Dry Creek sub area in the North...

  8. Percutaneous Abscess Drainage

    Science.gov (United States)

    ... Physician Resources Professions Site Index A-Z Percutaneous Abscess Drainage An abscess is an infected fluid collection ... are the benefits vs. risks? What is Percutaneous Abscess Drainage? An abscess is an infected fluid collection ...

  9. Solar Coronal Plumes

    Directory of Open Access Journals (Sweden)

    Giannina Poletto

    2015-12-01

    Full Text Available Polar plumes are thin long ray-like structures that project beyond the limb of the Sun polar regions, maintaining their identity over distances of several solar radii. Plumes have been first observed in white-light (WL images of the Sun, but, with the advent of the space era, they have been identified also in X-ray and UV wavelengths (XUV and, possibly, even in in situ data. This review traces the history of plumes, from the time they have been first imaged, to the complex means by which nowadays we attempt to reconstruct their 3-D structure. Spectroscopic techniques allowed us also to infer the physical parameters of plumes and estimate their electron and kinetic temperatures and their densities. However, perhaps the most interesting problem we need to solve is the role they cover in the solar wind origin and acceleration: Does the solar wind emanate from plumes or from the ambient coronal hole wherein they are embedded? Do plumes have a role in solar wind acceleration and mass loading? Answers to these questions are still somewhat ambiguous and theoretical modeling does not provide definite answers either. Recent data, with an unprecedented high spatial and temporal resolution, provide new information on the fine structure of plumes, their temporal evolution and relationship with other transient phenomena that may shed further light on these elusive features.

  10. Interaction of ring current and radiation belt protons with ducted plasmaspheric hiss. 1: Diffusion coefficients and timescales

    Science.gov (United States)

    Kozyra, J. U.; Rasmussen, C. E.; Miller, R. H.; Lyons, L. R.

    1994-01-01

    Protons that are convected into the inner magnetosphere in response to enhanced magnetic activity can resonate with ducted plasmaspheric hiss in the outer plasmasphere via an anomalous Doppler-shifted cyclotron resonance. Plasmaspheric hiss is a right-hand-polarized electromagnetic emission that is observed to fill the plasmasphere on a routine basis. When plasmaspheric hiss is confined within field-aligned ducts or guided along density gradients, wave normal angles remain largely below 45 deg. This allows resonant interactions with ions at typical ring current and radiation belt energies to take place. Such field-aligned ducts have been observed both within the plasmasphere and in regions outside of the plasmasphere. Wave intensities are estimated using statistical information from studies of detached plasma regions. Diffusion coefficients are presented for a range of L shells and proton energies for a fixed wave distribution. Harmonic resonances in the range N = +/-100 are considered in order to include interactions between hiss at 100 Hz to 2 kHz frequencies, and protons in the energy range between approximately 10 keV and 1000 keV. Diffusion timescales are estimated to be of the order of tens of days and comparable to or shorter than lifetimes for Coulomb decay and charge exchange losses over most of the energy and spatial ranges of interest.

  11. Transient drainage summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This report summarizes the history of transient drainage issues on the Uranium Mill Tailings Remedial Action (UMTRA) Project. It defines and describes the UMTRA Project disposal cell transient drainage process and chronicles UMTRA Project treatment of the transient drainage phenomenon. Section 4.0 includes a conceptual cross section of each UMTRA Project disposal site and summarizes design and construction information, the ground water protection strategy, and the potential for transient drainage.

  12. Chemistry in aircraft plumes

    Energy Technology Data Exchange (ETDEWEB)

    Kraabol, A.G.; Stordal, F.; Knudsen, S. [Norwegian Inst. for Air Research, Kjeller (Norway); Konopka, P. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Wessling (Germany). Inst. fuer Physik der Atmosphaere

    1997-12-31

    An expanding plume model with chemistry has been used to study the chemical conversion of NO{sub x} to reservoir species in aircraft plumes. The heterogeneous conversion of N{sub 2}O{sub 5} to HNO{sub 3}(s) has been investigated when the emissions take place during night-time. The plume from an B747 has been simulated. During a ten-hour calculation the most important reservoir species was HNO{sub 3} for emissions at noon. The heterogeneous reactions had little impact on the chemical loss of NO{sub x} to reservoir species for emissions at night. (author) 4 refs.

  13. Plasmasphere thermal structure as measured by ISEE-1 and DE-1

    Science.gov (United States)

    Comfort, R. H.

    Characteristics of plasmaspheric ion thermal structure are presented from a statistical survey of low-energy of ion measurements made by the retarding ion mass spectrometer (RIMS) on the DE-1 satellite. Morning and evening results are compared to illustrate diurnal trends. Typical day side temperature range from about 4000 K in the inner plasmasphere to over 10,000 K in the outer plasmasphere, while corresponding evening side temperatures range from near 2000 K to over 10,000 K. Magnetic activity is found to affect the morning and evening sides somewhat differently. Temperatures are found to remain constant or increase with altitude along magnetic field lines, depending on local time and L shell. Thermal equilibrium between H(+) and He(+) prevails to a high degree throughout the plasmasphere. Ion temperatures from the Plasma Composition Experiment (PCE) on ISEE-1 are generally consistent with those from DE-1/RIMS, but are lower and tend to indicate more large scale structure on the day side.

  14. Observations of a Pc5 global (cavity/waveguide) mode outside the plasmasphere by THEMIS

    DEFF Research Database (Denmark)

    Hartinger, Michael; Angelopoulos, Vassilis; Moldwin, Mark B.

    2012-01-01

    Standing fast mode waves known as global modes, or cavity/waveguide modes, have been extensively studied as a potential driver of monochromatic shear Alfven waves in the Earth's magnetosphere via the field line resonance (FLR) mechanism. However, their existence outside of the plasmasphere remain...

  15. Plume Measurement System (PLUMES) Calibration Experiment

    Science.gov (United States)

    1994-08-01

    Atle Lohrmann SonTek, Inc. 7940 Silverton Avenue, No. 105 San Diego, California 92126 and Craig Huhta JIMAR University of Hawaii, Honolulu, Hawaii 96822...Measurement System (PLUMES) Calibration Experiment by Age Lohrmann SonTek, Inc. 7940 Silverton Avenue, No. 105 San Diego, CA 92126 Craig Huhta JIMAR...PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) &. PERFORMING ORGANIZATION SonTek, Inc., 7940 Silverton Avenue, No. 105, San Diego, CA 92126 REPORT NUMBER

  16. Simultaneous disappearances of plasmaspheric hiss, exohiss, and chorus waves triggered by a sudden decrease in solar wind dynamic pressure

    Science.gov (United States)

    Liu, Nigang; Su, Zhenpeng; Gao, Zhonglei; Zheng, Huinan; Wang, Yuming; Wang, Shui; Spence, H. E.; Reeves, G. D.; Baker, D. N.; Blake, J. B.; Funsten, H. O.; Wygant, J. R.

    2017-01-01

    Magnetospheric whistler mode waves are of great importance in the radiation belt electron dynamics. Here on the basis of the analysis of a rare event with the simultaneous disappearances of whistler mode plasmaspheric hiss, exohiss, and chorus triggered by a sudden decrease in the solar wind dynamic pressure, we provide evidences for the following physical scenarios: (1) nonlinear generation of chorus controlled by the geomagnetic field inhomogeneity, (2) origination of plasmaspheric hiss from chorus, and (3) leakage of plasmaspheric hiss into exohiss. Following the reduction of the solar wind dynamic pressure, the dayside geomagnetic field configuration with the enhanced inhomogeneity became unfavorable for the generation of chorus, and the quenching of chorus directly caused the disappearances of plasmaspheric hiss and then exohiss.

  17. Martian Atmospheric Plumes: Behavior, Detectability and Plume Tracing

    Science.gov (United States)

    Banfield, Don; Mischna, M.; Sykes, R.; Dissly, R.

    2013-10-01

    We will present our recent work simulating neutrally buoyant plumes in the martian atmosphere. This work is primarily directed at understanding the behavior of discrete plumes of biogenic tracer gases, and thus increasing our understanding of their detectability (both from orbit and from in situ measurements), and finally how to use the plumes to identify their precise source locations. We have modeled the detailed behavior of martian atmospheric plumes using MarsWRF for the atmospheric dynamics and SCIPUFF (a terrestrial state of the art plume modeling code that we have modified to represent martian conditions) for the plume dynamics. This combination of tools allows us to accurately simulate plumes not only from a regional scale from which an orbital observing platform would witness the plume, but also from an in situ perspective, with the instantaneous concentration variations that a turbulent flow would present to a point sampler in situ instrument. Our initial work has focused on the detectability of discrete plumes from an orbital perspective and we will present those results for a variety of notional orbital trace gas detection instruments. We have also begun simulating the behavior of the plumes from the perspective of a sampler on a rover within the martian atmospheric boundary layer. The detectability of plumes within the boundary layer has a very strong dependence on the atmospheric stability, with plume concentrations increasing by a factor of 10-1000 during nighttime when compared to daytime. In the equatorial regions of the planet where we have simulated plumes, the diurnal tidal “clocking” of the winds is strongly evident in the plume trail, which similarly “clocks” around its source. This behavior, combined with the strong diurnal concentration variations suggests that a rover hunting a plume source would be well suited to approach it from a particular azimuth (downwind at night) to maximize detectability of the plume and the ability to

  18. Determinations of ionosphere and plasmasphere electron content for an African chain of GPS stations

    Science.gov (United States)

    Mazzella, Andrew J., Jr.; Bosco Habarulema, John; Yizengaw, Endawoke

    2017-05-01

    The confluence of recent instrumentation deployments in Africa with developments for the determination of plasmasphere electron content using Global Positioning System (GPS) receivers has provided new opportunities for investigations in that region. This investigation, using a selected chain of GPS stations, extends the method (SCORPION) previously applied to a chain of GPS stations in North America in order to separate the ionosphere and plasmasphere contributions to the total electron content (TEC) during a day (24 July) in 2011. The results span latitudes from the southern tip of Africa, across the Equator, to the southern Arabian Peninsula, providing a continuous latitudinal profile for both the ionosphere and plasmasphere during this day.The peak diurnal vertical ionosphere electron content (IEC) increases from about 14 TEC units (1 TEC unit = 1016 electrons m-2) at the southernmost station to about 32 TEC units near the geographic equator, then decreases to about 28 TEC units at the Arabian Peninsula. The peak diurnal slant plasmasphere electron content (PEC) varies between about 4 and 7 TEC units among the stations, with a local latitudinal profile that is significantly influenced by the viewing geometry at the station location, relative to the magnetic field configuration. In contrast, the peak vertical PEC varies between about 1 and 6 TEC units among the stations, with a more uniform latitudinal variation.Comparisons to other GPS data analyses are also presented for TEC, indicating the influence of the PEC on the determination of latitudinal TEC variations and also on the absolute TEC levels, by inducing an overestimate of the receiver bias. The derived TEC latitudinal profiles, in comparison to global map profiles, tend to differ from the map results only about as much as the map results differ among themselves. A combination of ionosonde IEC and alternative GPS TEC measurements, which in principle permits a PEC determination through their difference, was

  19. Unsteady turbulent buoyant plumes

    CERN Document Server

    Woodhouse, Mark J; Hogg, Andrew J

    2015-01-01

    We model the unsteady evolution of turbulent buoyant plumes following temporal changes to the source conditions. The integral model is derived from radial integration of the governing equations expressing the conservation of mass, axial momentum and buoyancy. The non-uniform radial profiles of the axial velocity and density deficit in the plume are explicitly described by shape factors in the integral equations; the commonly-assumed top-hat profiles lead to shape factors equal to unity. The resultant model is hyperbolic when the momentum shape factor, determined from the radial profile of the mean axial velocity, differs from unity. The solutions of the model when source conditions are maintained at constant values retain the form of the well-established steady plume solutions. We demonstrate that the inclusion of a momentum shape factor that differs from unity leads to a well-posed integral model. Therefore, our model does not exhibit the mathematical pathologies that appear in previously proposed unsteady i...

  20. Plumes Do Not Exist

    Science.gov (United States)

    Hamilton, W. B.; Anderson, D. L.; Foulger, G. R.; Winterer, E. L.

    Hypothetical plumes from the deep mantle are widely assumed to provide an abso- lute hotspot reference frame, inaugurate rifting, drive plates, and profoundly influence magmatic and tectonic evolution of oceans and continents. Many papers on local to global tectonics, magmatism, and geochemistry invoke plumes, and assign to the man- tle whatever properties, dynamics, and composition are needed to enable them. The fixed-plume concept arose from the Emperor-Hawaii seamount-and-island province, the 45 Ma inflection in which was assumed to record a 60-degree change in direction by the Pacific plate. Paleomagnetic latitudes and smooth Pacific spreading patterns show that such a change did not occur. Other Pacific chains once assumed to be syn- chronous with, and Euler-parallel to, Hawaii have proved to be neither. Thermal and physical properties of Hawaiian lithosphere falsify plume predictions. Rationales for fixed hotspots elsewhere also have become untenable as databases enlarged. Astheno- sphere is everywhere near solidus temperature, so buoyant melt does not require a local heat source but, rather, needs a thin roof or crack or tensional setting for egress. MORB and ocean-island basalt (OIB) broadly intergrade in composition, but MORB typically is richer in refractory elements and their radiogenic daughters, whereas OIB commonly is richer in fusible elements and their daughters. MORB and OIB contrasts are required by melt behavior and do not indicate unlike source reservoirs. MORB melts rise, with minimal reaction, through hot asthenosphere, whereas OIB melts re- act, and thereby lose substance, by crystallizing refractories and retaining and assim- ilating subordinate fusibles, with thick, cool lithosphere and crust. There is no need for hypotheses involving chaotic plume behavior or thousands of km of lateral flow of plume material, nor for postulates of SprimitiveT lower mantle contrary to cos- & cedil;mological and thermodynamic considerations. Plume

  1. Where Plumes Live

    Science.gov (United States)

    King, S. D.

    2004-12-01

    From the perspective of fluid dynamics, `Plumes or not?' might be the wrong question. Let me begin by defining a few terms. Plume with a `P' is the well-known thermal structure with thin (order 100 km) tail and large, bulbous head that originates at the core-mantle boundary. The thin tail/large, bulbous-head morphology has been generated in a number of laboratory and numerical experiments. It can be seen, for example, on the cover of the famous fluid dynamics text by Batchelor. There is a clearly-defined range of parameters for which this structure is the preferred solution for instabilities arising from a bottom boundary layer in a convecting fluid. For example, a strong temperature-dependent rheology is needed. By contrast, plume with a `p' is any cylindrical or quasi-cylindrical instability originating from a thermal (or thermo-chemical) boundary layer. In fluid dynamics plume is sometimes used interchangeable with jet. Unless there is a very small temperature drop across the core-mantle boundary or a rather remarkable balance between temperature and composition at the base of the mantle, there are almost certainly plumes. (Note the little p.) Are these plumes the thermal structures with thin (order 100 km) tails and large bulbous heads or could they be broad, hot regions such as the degree 2 pattern seen in global seismic tomography images of the lower mantle, or the disconnected droplets seen in chaotic convection? To study this question, I will present a sequence of numerical `experiments' that illustrate the morphology of instabilities from a basal thermal boundary layer, i.e., plumes. Some of the aspects I will present include: spherical geometry, temperature-and pressure-dependence of rheology, internal heating, pressure-dependent coefficient of thermal expansion, variable coefficient of thermal diffusivity, phase transformations, and compositional layering at the base of the mantle. The goal is to map out the parameters and conditions where Plumes live

  2. Dilution in Transition Zone between Rising Plumes and Surface Plumes

    DEFF Research Database (Denmark)

    Larsen, Torben

    2004-01-01

    The papers presents some physical experiments with the dilution of sea outfall plumes with emphasize on the transition zone where the relative fast flowing vertical plume turns to a horizontal surface plume following the slow sea surface currents. The experiments show that a considerable dilution...

  3. The plasmasphere during a space weather event: first results from the PLASMON project

    Directory of Open Access Journals (Sweden)

    Reda Jan

    2013-06-01

    Full Text Available The results of the first 18 months of the PLASMON project are presented. We have extended our three, existing ground-based measuring networks, AWDANet (VLF/whistlers, EMMA/SANSA (ULF/FLRs, and AARDDVARK (VLF/perturbations on transmitters’ signal, by three, eight, and four new stations, respectively. The extended networks will allow us to achieve the four major scientific goals, the automatic retrieval of equatorial electron densities and density profiles of the plasmasphere by whistler inversion, the retrieval of equatorial plasma mass densities by EMMA and SANSA from FLRs, developing a new, data assimilative model of plasmasphere and validating the model predictions through comparison of modeled REP losses with measured data by AARDDVARK network. The first results on each of the four objectives are presented through a case study on a space weather event, a dual storm sudden commencement which occurred on August 3 and 4, 2010.

  4. Plasmaspheric electron densities: the importance in modelling radiation belts and in SSA operation

    Science.gov (United States)

    Lichtenberger, János; Jorgensen, Anders; Koronczay, Dávid; Ferencz, Csaba; Hamar, Dániel; Steinbach, Péter; Clilverd, Mark; Rodger, Craig; Juhász, Lilla; Sannikov, Dmitry; Cherneva, Nina

    2016-04-01

    The Automatic Whistler Detector and Analyzer Network (AWDANet, Lichtenberger et al., J. Geophys. Res., 113, 2008, A12201, doi:10.1029/2008JA013467) is able to detect and analyze whistlers in quasi-realtime and can provide equatorial electron density data. The plasmaspheric electron densities are key parameters for plasmasphere models in Space Weather related investigations, particularly in modeling charged particle accelerations and losses in Radiation Belts. The global AWDANet detects millions of whistlers in a year. The network operates since early 2002 with automatic whistler detector capability and it has been recently completed with automatic analyzer capability in PLASMON (http://plasmon.elte.hu, Lichtenberger et al., Space Weather Space Clim. 3 2013, A23 DOI: 10.1051/swsc/2013045.) Eu FP7-Space project. It is based on a recently developed whistler inversion model (Lichtenberger, J. J. Geophys. Res., 114, 2009, A07222, doi:10.1029/2008JA013799), that opened the way for an automated process of whistler analysis, not only for single whistler events but for complex analysis of multiple-path propagation whistler groups. The network operates in quasi real-time mode since mid-2014, fifteen stations provide equatorial electron densities that are used as inputs for a data assimilative plasmasphere model but they can also be used directly in space weather research and models. We have started to process the archive data collected by AWDANet stations since 2002 and in this paper we present the results of quasi-real-time and off-line runs processing whistlers from quiet and disturb periods. The equatorial electron densities obtained by whistler inversion are fed into the assimilative model of the plasmasphere providing a global view of the region for processed the periods

  5. Quantitative Simulation of a Magnetospheric Substorm. 3. Plasmaspheric Electric Fields and Evolution of the Plasmapause.

    Science.gov (United States)

    1980-01-25

    plasmaspheric electric fields during magnetically disturbed periods are based on incoherent scatter radar results fromn St. Santin [ Testud et al., 1975...Millstone Hill radar results showing westward F-region ion drifts of almost 200 m/sec in the afternoon sector on 14 May, 1969. Testud et al. [1975...electrojet (AE) index. Testud et al. [1975] and Blanc et al. £1977] have both presented St. Santin backscatter measurements that show westward and

  6. Non-steady-state transport of superthermal electrons in the plasmasphere

    Science.gov (United States)

    Khazanov, George V.; Liemohn, Michael W.; Gombosi, Tamas I.; Nagy, Andrew F.

    1993-01-01

    Numerical solutions to the time-dependent kinetic equation, which describes the transport of superthermal electrons in the splasmasphere between the two conjugate ionospheres, are presented. The model calculates the distribution function as a function of time, field-aligned distance, energy, and pitch-angle. The processes of refilling, depleting, and establishing steady-state conditions of superthermal electrons in the plasmasphere are discussed.

  7. Turbulent buoyant jets and plumes

    CERN Document Server

    Rodi, Wolfgang

    The Science & Applications of Heat and Mass Transfer: Reports, Reviews, & Computer Programs, Volume 6: Turbulent Buoyant Jets and Plumes focuses on the formation, properties, characteristics, and reactions of turbulent jets and plumes. The selection first offers information on the mechanics of turbulent buoyant jets and plumes and turbulent buoyant jets in shallow fluid layers. Discussions focus on submerged buoyant jets into shallow fluid, horizontal surface or interface jets into shallow layers, fundamental considerations, and turbulent buoyant jets (forced plumes). The manuscript then exami

  8. On predicting mantle mushroom plumes

    Directory of Open Access Journals (Sweden)

    Ka-Kheng Tan

    2011-04-01

    Top cooling may produce plunging plumes of diameter of 585 km and at least 195 Myr old. The number of cold plumes is estimated to be 569, which has not been observed by seismic tomography or as cold spots. The cold plunging plumes may overwhelm and entrap some of the hot rising plumes from CMB, so that together they may settle in the transition zone.

  9. Global-scale coherence modulation of radiation-belt electron loss from plasmaspheric hiss.

    Science.gov (United States)

    Breneman, A W; Halford, A; Millan, R; McCarthy, M; Fennell, J; Sample, J; Woodger, L; Hospodarsky, G; Wygant, J R; Cattell, C A; Goldstein, J; Malaspina, D; Kletzing, C A

    2015-07-09

    Over 40 years ago it was suggested that electron loss in the region of the radiation belts that overlaps with the region of high plasma density called the plasmasphere, within four to five Earth radii, arises largely from interaction with an electromagnetic plasma wave called plasmaspheric hiss. This interaction strongly influences the evolution of the radiation belts during a geomagnetic storm, and over the course of many hours to days helps to return the radiation-belt structure to its 'quiet' pre-storm configuration. Observations have shown that the long-term electron-loss rate is consistent with this theory but the temporal and spatial dynamics of the loss process remain to be directly verified. Here we report simultaneous measurements of structured radiation-belt electron losses and the hiss phenomenon that causes the losses. Losses were observed in the form of bremsstrahlung X-rays generated by hiss-scattered electrons colliding with the Earth's atmosphere after removal from the radiation belts. Our results show that changes of up to an order of magnitude in the dynamics of electron loss arising from hiss occur on timescales as short as one to twenty minutes, in association with modulations in plasma density and magnetic field. Furthermore, these loss dynamics are coherent with hiss dynamics on spatial scales comparable to the size of the plasmasphere. This nearly global-scale coherence was not predicted and may affect the short-term evolution of the radiation belts during active times.

  10. Data assimilation of plasmasphere and upper ionosphere using COSMIC/GPS slant TEC measurements

    Science.gov (United States)

    Wu, M. J.; Guo, P.; Xu, T. L.; Fu, N. F.; Xu, X. S.; Jin, H. L.; Hu, X. G.

    2015-11-01

    Increasing total electron content (TEC) measurements from the low Earth orbiting satellites to Global Positioning System satellites flourish the exploration of the ionosphere and plasmasphere for decades. This paper indicates a method that 3-D Var is applied to assimilate precise orbit determination antenna TEC measurements of Constellation Observing System for Meteorology, Ionosphere, and Climate (COSMIC) satellites into the background global core plasma model (GCPM). The slant TEC data archived in the COSMIC Data Analysis and Archive Center from 500 km to 20,200 km are used to reconstruct a new electron density model. This model has a temporal resolution of 2 h and spatial resolutions of 2.5° in geomagnetic latitude, 5° in longitude, 50 km in the upper ionosphere, and several hundred kilometers in the plasmasphere. Preliminary results show that the data assimilation modifies the initial GCPM forecast to be better coincident with actual COSMIC measurements in internal quality check. Furthermore, independent validation with upper ionosphere-retrieved electron density and TEC of global ionosphere maps implies a reasonable improvement in the estimation of plasmaspheric electron density after the assimilation.

  11. Simulation of field-aligned H+ and He+ dynamics during late-stage plasmasphere refilling

    Directory of Open Access Journals (Sweden)

    J. A. Fedder

    2008-06-01

    Full Text Available The refilling of the plasmasphere for 3≤L≤4 following a model storm is simulated over long times (days using the NRL ionosphere code SAMI2 (Sami2 is Another Model of the Ionosphere. Refilling is dependent on the supply of topside H+ and He+ ions with the result that H+ refilling rates decrease and He+ refilling rates generally increase with increasing F10.7 index. Both early- and late-stage refilling are affected by net ion flows from the warmer to the colder geomagnetic hemisphere. When these flows are strong, the ability of the "winter helium bulge" to increase He+ refilling rates is suppressed. When neutral winds are not included, refilling rates fall, typically by a factor of two. In most cases, late-stage He+ refilling is proportional to H+ refilling, with typical He+/H+ density ratios of 2% for solar minimum and 10% for solar maximum. For high values of F10.7, He+ refilling exhibits a strong diurnal variation so that the He+/H+ density ratio varies by as much as a factor of two during late-stage refilling. Finally if the plasmasphere is left undisturbed, the H+ density can refill for as long as five weeks at L=3 and ten weeks at L=4, with saturation densities nearly an order of magnitude greater than typical observed densities. This confirms that the plasmasphere at these L values rarely obtains saturation.

  12. Thermal plumes in ventilated rooms

    DEFF Research Database (Denmark)

    Kofoed, Peter; Nielsen, Peter V.

    1990-01-01

    The design of a displacement ventilation system involves determination of the flow rate in the thermal plumes. The flow rate in the plumes and the vertical temperature gradient influence each other, and they are influenced by many factors. This paper shows some descriptions of these effects. Free...... to be the only possible approach to obtain the volume flow in: thermal plumes in ventilated rooms....

  13. Foam consolidation and drainage.

    Science.gov (United States)

    Jun, S; Pelot, D D; Yarin, A L

    2012-03-27

    A theoretical model of foam as a consolidating continuum is proposed. The general model is applied to foam in a gravity settler. It is predicted that liquid drainage from foam in a gravity settler begins with a slow drainage stage. Next, a stage with faster drainage occurs where the drainage rate doubles compared to the initial stage. The experiments conducted within the framework of this work confirmed the theoretical predictions and allowed measurements of foam characteristics. Foams of three different concentrations of Pantene Pro-V Classic Care Solutions shampoo were studied, as well as the addition of polyethylene oxide (PEO) in one case. The shampoo's main foaming components are sodium lauryl sulfate and sodium laureth sulfate. It is shown to what extent foam drainage is slowed down by using higher shampoo concentrations and how it is further decreased by adding polymer (PEO).

  14. Refilling process in the plasmasphere: a 3-D statistical characterization based on Cluster density observations

    Directory of Open Access Journals (Sweden)

    G. Lointier

    2013-02-01

    Full Text Available The Cluster mission offers an excellent opportunity to investigate the evolution of the plasma population in a large part of the inner magnetosphere, explored near its orbit's perigee, over a complete solar cycle. The WHISPER sounder, on board each satellite of the mission, is particularly suitable to study the electron density in this region, between 0.2 and 80 cm−3. Compiling WHISPER observations during 1339 perigee passes distributed over more than three years of the Cluster mission, we present first results of a statistical analysis dedicated to the study of the electron density morphology and dynamics along and across magnetic field lines between L = 2 and L = 10. In this study, we examine a specific topic: the refilling of the plasmasphere and trough regions during extended periods of quiet magnetic conditions. To do so, we survey the evolution of the ap index during the days preceding each perigee crossing and sort out electron density profiles along the orbit according to three classes, namely after respectively less than 2 days, between 2 and 4 days, and more than 4 days of quiet magnetic conditions (ap ≤ 15 nT following an active episode (ap > 15 nT. This leads to three independent data subsets. Comparisons between density distributions in the 3-D plasmasphere and trough regions at the three stages of quiet magnetosphere provide novel views about the distribution of matter inside the inner magnetosphere during several days of low activity. Clear signatures of a refilling process inside an expended plasmasphere in formation are noted. A plasmapause-like boundary, at L ~ 6 for all MLT sectors, is formed after 3 to 4 days and expends somewhat further after that. In the outer part of the plasmasphere (L ~ 8, latitudinal profiles of median density values vary essentially according to the MLT sector considered rather than according to the refilling duration. The shape of these density profiles

  15. Agricultural Drainage Well Intakes

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — Locations of surface intakes for registered agriculture drainage wells according to the database maintained by IDALS. Surface intakes were located from their...

  16. Surface Water & Surface Drainage

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This data set contains boundaries for all surface water and surface drainage for the state of New Mexico. It is in a vector digital data structure digitized from a...

  17. Airport Pavement Drainage

    Science.gov (United States)

    1990-06-01

    drainage layer and trench drains can be found in Cedergren (10). 4.2 COMPONENTS OF SUBSURFACE DRAINAGE SYSTEM 4.2.1 Outflow Once the water has found...According to Cedergren (10) the open graded aggregate can replace the normally used dense graded materials on an inch-for-inch basis. A main problem in...the perforated pipe to prevent fines from entering, Figure 4.24 (11). Cedergren (10) suggests that collector pipes should be 42 laid with the

  18. Kalman filter-based algorithms for monitoring the ionosphere and plasmasphere with GPS in near-real time

    Science.gov (United States)

    Anghel, Adela; Carrano, Charles; Komjathy, Attila; Astilean, Adina; Letia, Tiberiu

    2009-01-01

    Data collected from a GPS receiver located at low latitudes in the American sector are used to investigate the performance of the WinTEC algorithm [Anghel et al., 2008a, Kalman filter-based algorithm for near realtime monitoring of the ionosphere using dual frequency GPS data. GPS Solutions, accepted for publication; for different ionospheric modeling techniques: the single-shell linear, quadratic, and cubic approaches, and the multi-shell linear approach. Our results indicate that the quadratic and cubic approaches perform much better than the single-shell and multi-shell linear approaches in terms of post-fit residuals. The performance of the algorithm for the cubic approach is then further tested by comparing the vertical TEC predicted by WinTEC and USTEC [Spencer et al., 2004. Ionospheric data assimilation methods for geodetic applications. In: Proceedings of IEEE PLANS, Monterey, CA, 26-29 April, pp. 510-517] at five North American stations. In addition, since the GPS-derived total electron content (TEC) contains contributions from both ionospheric and plasmaspheric sections of the GPS ray paths, in an effort to improve the accuracy of the TEC retrievals, a new data assimilation module that uses background information from an empirical plasmaspheric model [Gallagher et al., 1988. An empirical model of the Earth's plasmasphere. Advances in Space Research 8, (8)15-(8)24] has been incorporated into the WinTEC algorithm. The new Kalman filter-based algorithm estimates both the ionospheric and plasmaspheric electron contents, the combined satellite and receiver biases, and the estimation error covariance matrix, in a single-site or network solution. To evaluate the effect of the plasmaspheric component on the estimated biases and total TEC and to assess the performance of the newly developed algorithm, we compare the WinTEC results, with and without the plasmaspheric term included, at three GPS receivers located at different latitudes in the American sector, during

  19. A case for mantle plumes

    Institute of Scientific and Technical Information of China (English)

    Geoffrey F. Davies

    2005-01-01

    The existence of at least several plumes in the Earth's mantle can be inferred with few assumptions from well-established observations. As well, thermal mantle plumes can be predicted from well-established and quantified fluid dynamics and a plausible assumption about the Earth's early thermal state. Some additional important observations, especially of flood basalts and rift-related magmatism, have been shown to be plausibly consistent with the physical theory. Recent claims to have detected plumes using seismic tomography may comprise the most direct evidence for plumes, but plume tails are likely to be difficult to resolve definitively and the claims need to be well tested. Although significant questions remain about its viability, the plume hypothesis thus seems to be well worth continued investigation. Nevertheless there are many non-plate-related magmatic phenomena whose association with plumes is unclear or unlikely. Compositional buoyancy has recently been shown potentially to substantially complicate the dynamics of plumes, and this may lead to explanations for a wider range of phenomena, including "headless" hotspot tracks, than purely thermal plumes.

  20. Mantle plumes and continental tectonics.

    Science.gov (United States)

    Hill, R I; Campbell, I H; Davies, G F; Griffiths, R W

    1992-04-10

    Mantle plumes and plate tectonics, the result of two distinct modes of convection within the Earth, operate largely independently. Although plumes are secondary in terms of heat transport, they have probably played an important role in continental geology. A new plume starts with a large spherical head that can cause uplift and flood basalt volcanism, and may be responsible for regional-scale metamorphism or crustal melting and varying amounts of crustal extension. Plume heads are followed by narrow tails that give rise to the familiar hot-spot tracks. The cumulative effect of processes associated with tail volcanism may also significantly affect continental crust.

  1. Terrestrial Plume Impingement Testbed Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Masten Space Systems proposes to create a terrestrial plume impingement testbed for generating novel datasets for extraterrestrial robotic missions. This testbed...

  2. Determination of global plasmaspheric electron density profile by tomographic approach using omega signals and ray tracing

    Science.gov (United States)

    Kimura, I.; Kasahara, Y.; Oya, H.

    2001-07-01

    It has been necessary requirements to determine the global electron density distribution in the plasmasphere with time resolutions, of less than a day. We have provided solutions to this requirement using the wave normal directions, delay time of Omega signals and the in situ electron density observed on-board the Japanese satellite Akebono (Sawada et al., Journal of Geophysical Research 98(11) (1993) 267, Kimura et al., Advance Space Research 15(2) (1995) 103, Advance Space Research 18(6) (1996) 279, Journal of Atmospheric and Solar-Terrestrial Physics 59 (1997) 1569). The present paper is intended to review our earlier studies.

  3. 3D Reconfigurable NoC Multiprocessor Portable Sounder for Plasmaspheric Studies

    Science.gov (United States)

    Dekoulis, George

    2016-07-01

    The paper describes the development of a prototype imaging sounder for studying the irregularities of the ionospheric plasma. Cutting edge three-dimensional reconfigurable logic has been implemented allowing highly-intensive scientific calculations to be performed in hardware. The new parallel processing algorithms implemented offer a significant amount of performance improvement in the range of 80% compared to existing digital sounder implementations. The current system configuration is taking into consideration the modern scientific needs for portability during scientific campaigns. The prototype acts as a digital signal processing experimentation platform for future larger-scale digital sounder instrumentations for measuring complex planetary plasmaspheric environments.

  4. Effects of plasmaspheric ion heating due to ionospheric and magnetospheric sources

    Science.gov (United States)

    Comfort, Richard H.

    1996-01-01

    In an initial study, the He(+) observations from the Retarding Ion Mass Spectrometer on Dynamics Explorer 1 (RIMS/DE 1) was examined for more than 120 transits of the plasmasphere in the fall of 1981. The He(+) to H(+) ratio was determined as it varied spatially over portions of the DE 1 orbit, and its variation with solar and magnetic activities and with local time, focusing specifically on the inner plasmasphere. These variations were compared along the L = 2 field line with calculations made by the Field Line Interhemispheric Plasma (FLIP) code. In a recently submitted paper, the He(+) to H(+) density ratio was examined for all the available data from 1981 to 1984 from the RIMS on DE 1. There are two basic characteristics of the ratio: one is that the ratio decreases with radial distance in the plasmasphere, and the other is the strong dependence of the density ratio on solar activity. In addition to the He(+)/H(+) ratio research, a phenomenon has been studied in the topside ionosphere which relates to the thermal coupling of the ionosphere to the plasmasphere. There is little or no correlation with magnetic and solar activity here. Another study has been directed toward the relation of plasma properties to the density gradients forming the plasmapause. The study has followed a two-pronged approach. First, the observations have been analyzed to determine what happens to the plasma properties across these boundary layers (density gradients). Second, comparisons were made with FLIP model calculations to determine how well the model is able to treat these conditions. Among the significant lessons learned in these studies are two that bear directly on the direction of future investigations in this area. First, composition cannot be viewed independently of thermal structure. Second, solar and magnetic activity effects are real; but the causal relationship between activity and effects is frequently quite complicated because several different processes appear to be

  5. Dilution of Buoyant Surface Plumes

    DEFF Research Database (Denmark)

    Larsen, Torben; Petersen, Ole

    The purpose of present work is to establish a quantitative description of a surface plume which is valid for the range of density differences occurring in relation to sewage outfalls.......The purpose of present work is to establish a quantitative description of a surface plume which is valid for the range of density differences occurring in relation to sewage outfalls....

  6. Thermal Plumes in Ventilated Rooms

    DEFF Research Database (Denmark)

    Kofoed, Peter; Nielsen, Peter V.

    The design of a displacement ventilation system involves determination of the flow rate in the thermal plumes. The flow rate in the plumes and the vertical temperature gradient influence each other, and they are influenced by many factors. This paper shows some descriptions of these effects....

  7. Atmospheric chemistry in volcanic plumes.

    Science.gov (United States)

    von Glasow, Roland

    2010-04-13

    Recent field observations have shown that the atmospheric plumes of quiescently degassing volcanoes are chemically very active, pointing to the role of chemical cycles involving halogen species and heterogeneous reactions on aerosol particles that have previously been unexplored for this type of volcanic plumes. Key features of these measurements can be reproduced by numerical models such as the one employed in this study. The model shows sustained high levels of reactive bromine in the plume, leading to extensive ozone destruction, that, depending on plume dispersal, can be maintained for several days. The very high concentrations of sulfur dioxide in the volcanic plume reduces the lifetime of the OH radical drastically, so that it is virtually absent in the volcanic plume. This would imply an increased lifetime of methane in volcanic plumes, unless reactive chlorine chemistry in the plume is strong enough to offset the lack of OH chemistry. A further effect of bromine chemistry in addition to ozone destruction shown by the model studies presented here, is the oxidation of mercury. This relates to mercury that has been coemitted with bromine from the volcano but also to background atmospheric mercury. The rapid oxidation of mercury implies a drastically reduced atmospheric lifetime of mercury so that the contribution of volcanic mercury to the atmospheric background might be less than previously thought. However, the implications, especially health and environmental effects due to deposition, might be substantial and warrant further studies, especially field measurements to test this hypothesis.

  8. Wound Drainage Culture (For Parents)

    Science.gov (United States)

    ... to Be Smart About Social Media Wound Drainage Culture KidsHealth > For Parents > Wound Drainage Culture Print A A A What's in this article? ... Have Questions What It Is A wound drainage culture is a test to detect germs such as ...

  9. Orbital Maneuvering Vehicle (OMV) plume and plume effects study

    Science.gov (United States)

    Smith, Sheldon D.

    1991-01-01

    The objective was to characterize the Orbital Maneuvering Vehicle (OMV) propulsion and attitude control system engine exhaust plumes and predict the resultant plume impingement pressure, heat loads, forces, and moments. Detailed description is provided of the OMV gaseous nitrogen (GN2) thruster exhaust plume flow field characteristics calculated with the RAMP2 snd SFPGEN computer codes. Brief descriptions are included of the two models, GN2 thruster characteristics and RAMP2 input data files. The RAMP2 flow field could be recalculated by other organizations using the information presented. The GN2 flow field can be readily used by other organizations who are interested in GN2 plume induced environments which require local flow field properties which can be supplied using the SFPGEN GN2 model.

  10. Biogeochemistry of landfill leachate plumes

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Kjeldsen, Peter; Bjerg, Poul Løgstrup

    2001-01-01

    is on dissolved organic matter, xenobiotic organic compounds, inorganic macrocomponents as anions and cations, and heavy metals. Laboratory as well as field investigations are included. This review is an up-date of an earlier comprehensive review. The review shows that most leachate contamination plumes...... the behavior of the contaminants in the plume as the leachate migrates away from the landfill. Diverse microbial communities have been identified in leachate plumes and are believed to be responsible for the redox processes. Dissolved organic C in the leachate, although it appears to be only slowly degradable...

  11. Predicting tile drainage discharge

    DEFF Research Database (Denmark)

    Iversen, Bo Vangsø; Kjærgaard, Charlotte; Petersen, Rasmus Jes;

    of the water load coming from the tile drainage system is therefore essential. This work aims at predicting tile drainage discharge using dynamic as well as a statistical predictive models. A large dataset of historical tile drain discharge data, daily discharge values as well as yearly average values were......More than 50 % of Danish agricultural areas are expected to be artificial tile drained. Transport of water and nutrients through the tile drain system to the aquatic environment is expected to be significant. For different mitigation strategies such as constructed wetlands an exact knowledge...... used in the analysis. For the dynamic modelling, a simple linear reservoir model was used where different outlets in the model represented tile drain as well as groundwater discharge outputs. This modelling was based on daily measured tile drain discharge values. The statistical predictive model...

  12. Acid mine drainage

    Science.gov (United States)

    Bigham, Jerry M.; Cravotta, Charles A.

    2016-01-01

    Acid mine drainage (AMD) consists of metal-laden solutions produced by the oxidative dissolution of iron sulfide minerals exposed to air, moisture, and acidophilic microbes during the mining of coal and metal deposits. The pH of AMD is usually in the range of 2–6, but mine-impacted waters at circumneutral pH (5–8) are also common. Mine drainage usually contains elevated concentrations of sulfate, iron, aluminum, and other potentially toxic metals leached from rock that hydrolyze and coprecipitate to form rust-colored encrustations or sediments. When AMD is discharged into surface waters or groundwaters, degradation of water quality, injury to aquatic life, and corrosion or encrustation of engineered structures can occur for substantial distances. Prevention and remediation strategies should consider the biogeochemical complexity of the system, the longevity of AMD pollution, the predictive power of geochemical modeling, and the full range of available field technologies for problem mitigation.

  13. Smoke plumes: Emissions and effects

    Science.gov (United States)

    Susan O' Neill; Shawn Urbanski; Scott Goodrick; Sim Larkin

    2017-01-01

    Smoke can manifest itself as a towering plume rising against the clear blue sky-or as a vast swath of thick haze, with fingers that settle into valleys overnight. It comes in many forms and colors, from fluffy and white to thick and black. Smoke plumes can rise high into the atmosphere and travel great distances across oceans and continents. Or smoke can remain close...

  14. Equatorial spread F fossil plumes

    Directory of Open Access Journals (Sweden)

    S. L. Ossakow

    2010-11-01

    Full Text Available Behaviour of equatorial spread F (ESF fossil plumes, i.e., ESF plumes that have stopped rising, is examined using the NRL SAMI3/ESF three-dimensional simulation code. We find that fossil bubbles, plasma density depletions associated with fossil plumes, can persist as high-altitude equatorial depletions even while being "blown" by zonal winds. Corresponding airglow-proxy images of fossil plumes, plots of electron density versus longitude and latitude at a constant altitude of 288 km, are shown to partially "fill in" in most cases, beginning with the highest altitude field lines within the plume. Specifically, field lines upon which the E field has fallen entirely to zero are affected and only the low altitude (≤600 km portion if each field line fills in. This suggests that it should be possible to observe a bubble at high altitude on a field line for which the corresponding airglow image no longer shows a depletion. In all cases ESF plumes stop rising when the flux-tube-integrated ion mass density inside the upper edge of the bubble is equal to that of the nearby background, further supporting the result of Krall et al. (2010b.

  15. Impact of the dipole tilt angle on the ionospheric plasma in the outer plasmasphere

    Science.gov (United States)

    Marchaudon, Aurelie; Blelly, Pierre-Louis

    2015-04-01

    We have developed a new interhemispheric 16-moment based ionosphere model. This model describes the field-aligned transport of the multi-species ionospheric plasma (6 ions) from one hemisphere to the other, taking into account source processes at low altitudes (photoionization, chemistry) and coupling with suprathermal electrons. We simulate the convection and corotation transport of closed flux tubes in the outer plasmasphere for tilted/eccentric dipolar magnetic field configuration. We ran the model in solstice and equinox conditions and for two plasmapause boundary conditions: one corresponding to standard conditions with a stagnation point at 4.5 Earth radii (RE) and 15h Magnetic Local Time (MLT) and one corresponding to very quiet conditions with a stagnation point at 6 RE and 15h MLT. For each season/stagnation simulation, the model is run for 30 days before the equinox/solstice date in order to eliminate the transients. The goal is to study the combined effect of the tilt of the magnetic field and the rotation axis on the field-aligned dynamics and overall equilibrium of the subauroral ionosphere. In the classical representation of the plasmasphere, the ionosphere only depends on angular MLT sector. We will show that due to the tilt effect, this view is erroneous and no real dynamic equilibrium is reached, in particular close to the stagnation point where we can observe large day-to-day variations in the ionospheric parameters. Finally, we will present the temperatures anisotropy development along the flux tube for different positions of the stagnation point.

  16. Self-Consistent Model of Magnetospheric Electric Field, Ring Current, Plasmasphere, and Electromagnetic Ion Cyclotron Waves: Initial Results

    Science.gov (United States)

    Gamayunov, K. V.; Khazanov, G. V.; Liemohn, M. W.; Fok, M.-C.; Ridley, A. J.

    2009-01-01

    Further development of our self-consistent model of interacting ring current (RC) ions and electromagnetic ion cyclotron (EMIC) waves is presented. This model incorporates large scale magnetosphere-ionosphere coupling and treats self-consistently not only EMIC waves and RC ions, but also the magnetospheric electric field, RC, and plasmasphere. Initial simulations indicate that the region beyond geostationary orbit should be included in the simulation of the magnetosphere-ionosphere coupling. Additionally, a self-consistent description, based on first principles, of the ionospheric conductance is required. These initial simulations further show that in order to model the EMIC wave distribution and wave spectral properties accurately, the plasmasphere should also be simulated self-consistently, since its fine structure requires as much care as that of the RC. Finally, an effect of the finite time needed to reestablish a new potential pattern throughout the ionosphere and to communicate between the ionosphere and the equatorial magnetosphere cannot be ignored.

  17. ISEE 1 observations of thermal plasma in the vicinity of the plasmasphere during periods of quieting magnetic activity

    Energy Technology Data Exchange (ETDEWEB)

    Horwitz, J.L.; Baugher, C.R.; Chappell, C.R.; Shelley, E.G.; Young, D.T.; Anderson, R.R.

    1981-11-01

    Thermal (< or approx. =100 electron volts) ion observations made with the plasma composition experiment on ISEE 1 are combined with plasma density profiles obtained from plasma frequency measurements made with the plasma wave experiment to conduct an investigation of thermal plasma behavior in the vicinity of the plasmasphere during periods of quieting magnetic activity. Normally, the principal thermal ion population in the plasmasphere consists of cold (kT< or approx. =1 eV), isotropic distributions with ion species in the order of dominance H/sup +/:He/sup +/:O/sup +/, while outside the plasmapause, the observed E< or approx. =100 eV ion distributions usually are field-aligned in structure, have characteristic energies E< or approx. =10 eV and H/sup +/:O/sup +/He/sup +/ order of dominance in fluxes. During periods in which the magnetic activity quiets, the above two regions are separated by a new region in which, at times, low-energy (approx.1-2 eV) H/sup +/ and He/sup +/ are found flowing along the magnetic field lines. On other occasions following quieting magnetic activity, pancake distributions (peak fluxes at 90/sup 0/ pitch angle) are observed in this region. Other complex distributions have been seen, and these complexities and the limitations of the data coverage preclude a satisfactory simple interpretation. It seems plausible to identify this region as the site of plasmasphere refilling. However, the data presumably also contain evidence of the quiet time rotation of the plasmasphere bulge region into the morning sector.

  18. In-situ treatment of mine drainage water using porous reactive walls

    Energy Technology Data Exchange (ETDEWEB)

    Blowes, D.W.; Ptacek, C.J.; Waybrant, K.R.; Bain, J.G. [University of Waterloo, Waterloo, ON (Canada). Waterloo Centre for Groundwater Research

    1995-01-01

    The purpose is to describe research on porous reactive walls, which are installed in the path of plumes of ground water from tailings, to determine their suitability for prevention and remediation of acid mine drainage and dissolved metals release. The method involves removal of a portion of the aquifer in the ground water plume path and its replacement by a permeable reactive mixture. Experiments under way and preliminary results are described for laboratory batch and column experiments and for a small scale field experiment using reactive walls containing organic carbon and sulphate-reducing bacteria. The results suggest that the method is effective and economically viable. 8 refs., 3 figs.

  19. A case study of storm commencement and recovery plasmaspheric electric fields near L=2.5 at equinox

    Directory of Open Access Journals (Sweden)

    H. F. Balmforth (*

    Full Text Available Data from the VLF Doppler experiment at Faraday, Antarctica (65° S, 64° W are used to study the penetration of the high-latitude convection electric field to lower latitudes during severely disturbed conditions. Alterations of the electric field at L-values within the range 2.0 - 2.7 are studied for two cases at equinox (10 - 12 September 1986 and 1 - 3 May 1986. The recovery of the electric field is found to be approximately an exponential function of time. Values for the equatorial meridional E×B drift velocity, inferred from the data, are used as inputs to a model of the plasmasphere and ionosphere. The model and experimental results are used to investigate the post-storm alteration of ionospheric coupling processes. The magnitude of the effect of ionosphere-plasmasphere coupling fluxes on NmF2 values and the O+-H+ transition height is dependent on the local time of storm commencement, and on the orientation of the electric field. The coupling fluxes appear to have a maximum influence on ionospheric content during the main phase of geomagnetic activity that produces outward motion of plasmaspheric whistler ducts.

  20. Plumes in stellar convection zones

    CERN Document Server

    Zahn, J P

    1999-01-01

    All numerical simulations of compressible convection reveal the presence of strong downwards directed flows. Thanks to helioseismology, such plumes have now been detected also at the top of the solar convection zone, on super- granular scales. Their properties may be crudely described by adopting Taylor's turbulent entrainment hypothesis, whose validity is well established under various conditions. Using this model, one finds that the strong density stratification does not prevent the plumes from traversing the whole convection zone, and that they carry upwards a net energy flux (Rieutord & Zahn 1995). They penetrate to some extent in the adjacent stable region, where they establish a nearly adiabatic stratification. These plumes have a strong impact on the dynamics of stellar convection zones, and they play probably a key role in the dynamo mechanism.

  1. Coastal river plumes: Collisions and coalescence

    Science.gov (United States)

    Warrick, Jonathan A.; Farnsworth, Katherine L.

    2017-02-01

    Plumes of buoyant river water spread in the ocean from river mouths, and these plumes influence water quality, sediment dispersal, primary productivity, and circulation along the world's coasts. Most investigations of river plumes have focused on large rivers in a coastal region, for which the physical spreading of the plume is assumed to be independent from the influence of other buoyant plumes. Here we provide new understanding of the spreading patterns of multiple plumes interacting along simplified coastal settings by investigating: (i) the relative likelihood of plume-to-plume interactions at different settings using geophysical scaling, (ii) the diversity of plume frontal collision types and the effects of these collisions on spreading patterns of plume waters using a two-dimensional hydrodynamic model, and (iii) the fundamental differences in plume spreading patterns between coasts with single and multiple rivers using a three-dimensional hydrodynamic model. Geophysical scaling suggests that coastal margins with numerous small rivers (watershed areas 100,000 km2). When two plume fronts meet, several types of collision attributes were found, including refection, subduction and occlusion. We found that the relative differences in pre-collision plume densities and thicknesses strongly influenced the resulting collision types. The three-dimensional spreading of buoyant plumes was found to be influenced by the presence of additional rivers for all modeled scenarios, including those with and without Coriolis and wind. Combined, these results suggest that plume-to-plume interactions are common phenomena for coastal regions offshore of the world's smaller rivers and for coastal settings with multiple river mouths in close proximity, and that the spreading and fate of river waters in these settings will be strongly influenced by these interactions. We conclude that new investigations are needed to characterize how plumes interact offshore of river mouths to better

  2. Coastal river plumes: Collisions and coalescence

    Science.gov (United States)

    Warrick, Jonathan; Farnsworth, Katherine L

    2017-01-01

    Plumes of buoyant river water spread in the ocean from river mouths, and these plumes influence water quality, sediment dispersal, primary productivity, and circulation along the world’s coasts. Most investigations of river plumes have focused on large rivers in a coastal region, for which the physical spreading of the plume is assumed to be independent from the influence of other buoyant plumes. Here we provide new understanding of the spreading patterns of multiple plumes interacting along simplified coastal settings by investigating: (i) the relative likelihood of plume-to-plume interactions at different settings using geophysical scaling, (ii) the diversity of plume frontal collision types and the effects of these collisions on spreading patterns of plume waters using a two-dimensional hydrodynamic model, and (iii) the fundamental differences in plume spreading patterns between coasts with single and multiple rivers using a three-dimensional hydrodynamic model. Geophysical scaling suggests that coastal margins with numerous small rivers (watershed areas  100,000 km2). When two plume fronts meet, several types of collision attributes were found, including refection, subduction and occlusion. We found that the relative differences in pre-collision plume densities and thicknesses strongly influenced the resulting collision types. The three-dimensional spreading of buoyant plumes was found to be influenced by the presence of additional rivers for all modeled scenarios, including those with and without Coriolis and wind. Combined, these results suggest that plume-to-plume interactions are common phenomena for coastal regions offshore of the world’s smaller rivers and for coastal settings with multiple river mouths in close proximity, and that the spreading and fate of river waters in these settings will be strongly influenced by these interactions. We conclude that new investigations are needed to characterize how plumes interact offshore of river mouths to

  3. Sustainable Drainage Systems

    Directory of Open Access Journals (Sweden)

    Miklas Scholz

    2015-05-01

    Full Text Available Urban water management has somewhat changed since the publication of The Sustainable Drainage System (SuDS Manual in 2007 [1], transforming from building traditional sewers to implementing SuDS, which are part of the best management practice techniques used in the USA and seen as contributing to water-sensitive urban design in Australia. Most SuDS, such as infiltration trenches, swales, green roofs, ponds, and wetlands, address water quality and quantity challenges, and enhance the local biodiversity while also being acceptable aesthetically to the public. Barriers to the implementation of SuDS include adoption problems, flood and diffuse pollution control challenges, negative public perception, and a lack of decision support tools addressing, particularly, the retrofitting of these systems while enhancing ecosystem services. [...

  4. Interaction of ring current and radiation belt protons with ducted plasmaspheric hiss. 2. Time evolution of the distribution function

    Science.gov (United States)

    Kozyra, J. U.; Rasmussen, C. E.; Miller, R. H.; Villalon, E.

    1995-11-01

    The evolution of the bounce-averaged ring current/radiation belt proton distribution is simulated during resonant interactions with ducted plasmaspheric hiss. The plasmaspheric hiss is assumed to be generated by ring current electrons and to be damped by the energetic protons. Thus energy is transferred between energetic electrons and protons using the plasmaspheric hiss as a mediary. The problem is not solved self-consistently. During the simulation period, interactions with ring current electrons (not represented in the model) are assumed to maintain the wave amplitudes in the presence of damping by the energetic protons, allowing the wave spectrum to be held fixed. Diffusion coefficients in pitch angle, cross pitch angle/energy, and energy were previously calculated by Kozyra et al. (1994) and are adopted for the present study. The simulation treats the energy range, E>=80 keV, within which the wave diffusion operates on a shorter timescale than other proton loss processes (i.e., Coulomb drag and charge exchange). These other loss processes are not included in the simulation. An interesting result of the simulation is that energy diffusion maximizes at moderate pitch angles near the edge of the atmospheric loss cone. Over the simulation period, diffusion in energy creates an order of magnitude enhancement in the bounce-averaged proton distribution function at moderate pitch angles. The loss cone is nearly empty because scattering of particles at small pitch angles is weak. The bounce-averaged flux distribution, mapped to ionospheric heights, results in elevated locally mirroring proton fluxes. OGO 5 observed order of magnitude enhancements in locally mirroring energetic protons at altitudes between 350 and 1300 km and invariant latitudes between 50° and 60° (Lundblad and Soraas, 1978). The proton distributions were highly anisotropic in pitch angle with nearly empty loss cones. The similarity between the observed distributions and those resulting from this

  5. Full-wave model of D-region upward VLF coupling to whistlers in the plasmasphere

    Science.gov (United States)

    Jacobson, A. R.; Shao, X.; Lay, E. H.

    2012-12-01

    Atmospheric-lightning-to-plasmasphere VLF coupling via whistlers is key to understanding the problem of radiation-belt losses and the slot region. In the lowermost ionosphere, the "D-region" (roughly 60 - 100 km altitude), the coupling occurs between the VLF incident from the "vacuum" below, to the electron whistler capable of transiting upward through the E- and F-regions above. We have modified our successful and data-validated D-region VLF downward-reflection model to predict upward-coupled whistler waveforms recorded on topside satellites. The model has been run in production mode for predicting downward-reflected waveforms recorded at ground stations, but the model's internal calculation also fully describes the "penetrating" solution that merges into the oblique electron whistler. We have begun to test the model against VLF, three-dimensional electric-field recordings from the Vector Electric Field Instrument (VEFI) [Pfaff et al., 2010] on the C/NOFS satellite. VEFI's broadband recording and large on-board memory serendipitously provide an excellent platform for studying lightning whistlers in the plasmasphere. We have already demonstrated [Jacobson et al., 2011] that VEFI is superbly suited for testing transionospheric propagation, in conjunction with the World Wide Lightning Location Network (WWLLN; see www.wwlln.net) to provide groundtruth location/time of the lightning strokes. This poster will describe latest results. Jacobson, A. R., R. H. Holzworth, R. F. Pfaff, and M. P. McCarthy (2011), Study of oblique whistlers in the low-latitude ionosphere, jointly with the C/NOFS satellite and the World-Wide Lightning Location Network, Annales Geophysicae, 29, 851-863. Pfaff, R., D. Rowland, H. Freudenreich, K. Bromund, K. Le, M. Acuna, J. Klenzing, C. Liebrecht, S. Martin, W. J. Burke, N. C. Maynard, D. E. Hunton, P. A. Roddy, J. O. Ballenthin, and G. R. Wilson (2010), Observations of DC electric fields in the low-latitude ionosphere and their variations with

  6. Lidar measurements of plume statistics

    DEFF Research Database (Denmark)

    Ejsing Jørgensen, Hans; Mikkelsen, T.

    1993-01-01

    the source, instantaneous crosswind plume profiles were detected repetitively at high spatial (1.5 m) and temporal (3 sec) intervals by use of a mini LIDAR system. The experiments were accompanied by measurement of the surface-layer mean wind and turbulence quantities by sonic anemometers. On the basis...

  7. Ship exhaust gas plume cooling

    NARCIS (Netherlands)

    Schleijpen, H.M.A.; Neele, P.P.

    2004-01-01

    The exhaust gas plume is an important and sometimes dominating contributor to the infrared signature of ships. Suppression of the infrared ship signatures has been studied by TNO for the Royal Netherlands Navy over considerable time. This study deals with the suppression effects, which can be achiev

  8. Downwelling wind, tides, and estuarine plume dynamics

    Science.gov (United States)

    Lai, Zhigang; Ma, Ronghua; Huang, Mingfen; Chen, Changsheng; Chen, Yong; Xie, Congbin; Beardsley, Robert C.

    2016-06-01

    The estuarine plume dynamics under a downwelling-favorable wind condition were examined in the windy dry season of the Pearl River Estuary (PRE) using the PRE primitive-equation Finite-Volume Community Ocean Model (FVCOM). The wind and tide-driven estuarine circulation had a significant influence on the plume dynamics on both local and remote scales. Specifically, the local effect of downwelling-favorable winds on the plume was similar to the theoretical descriptions of coastal plumes, narrowing the plume width, and setting up a vertically uniform downstream current at the plume edge. Tides tended to reduce these plume responses through local turbulent mixing and advection from upstream regions, resulting in an adjustment of the isohalines in the plume and a weakening of the vertically uniform downstream current. The remote effect of downwelling-favorable winds on the plume was due to the wind-induced estuarine sea surface height (SSH), which strengthened the estuarine circulation and enhanced the plume transport accordingly. Associated with these processes, tide-induced mixing tended to weaken the SSH gradient and thus the estuarine circulation over a remote influence scale. Overall, the typical features of downwelling-favorable wind-driven estuarine plumes revealed in this study enhanced our understanding of the estuarine plume dynamics under downwelling-favorable wind conditions.

  9. Characterization of redox conditions in pollution plumes

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Bjerg, Poul Løgstrup; Banwart, Steven A.

    2000-01-01

    Evalution of redox conditions in groundwater pollution plumes is often a prerequisite for understanding the behviour of the pollutants in the plume and for selecting remediation approaches. Measuring of redox conditions in pollution plumes is, however, a fairly recent issue and yet relative few...

  10. Characterization of redox conditions in pollution plumes

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Bjerg, Poul Løgstrup; Banwart, Steven A.

    2000-01-01

    Evalution of redox conditions in groundwater pollution plumes is often a prerequisite for understanding the behviour of the pollutants in the plume and for selecting remediation approaches. Measuring of redox conditions in pollution plumes is, however, a fairly recent issue and yet relative few...

  11. Spatial and temporal characteristics of poloidal waves in the terrestrial plasmasphere: a CLUSTER case study

    Directory of Open Access Journals (Sweden)

    S. Schäfer

    2007-05-01

    Full Text Available Oscillating magnetic field lines are frequently observed by spacecraft in the terrestrial and other planetary magnetospheres. The CLUSTER mission is a very suitable tool to further study these Alfvén waves as the four CLUSTER spacecraft provide for an opportunity to separate spatial and temporal structures in the terrestrial magnetosphere. Using a large scaled configuration formed by the four spacecraft we are able to detect a poloidal Ultra-Low-Frequency (ULF pulsation of the magnetic and electric field in order to analyze its temporal and spatial structures. For this purpose the measurements are transformed into a specific field line related coordinate system to investigate their specific amplitude pattern depending on the path of the CLUSTER spacecraft across oscillating field lines. These measurements are then compared with modeled spacecraft observations across a localized poloidal wave resonator in the dayside plasmasphere. A detailed investigation of theoretically expected poloidal eigenfrequencies allows us to specify the observed 16 mHz pulsation as a third harmonic oscillation. Based on this we perform a case study providing a clear identification of wave properties such as an spatial scale structure of about 0.67 RE, the azimuthal wave number m≈30, temporal evolution, and energy transport in the detected ULF pulsations.

  12. Compositional differentiation of Enceladus' plume

    Science.gov (United States)

    Khawaja, N.; Postberg, F.; Schmidt, J.

    2014-04-01

    The Cosmic Dust Analyser (CDA) on board the Cassini spacecraft sampled Enceladus' plume ice particles emanated directly from Enceladus' fractured south polar terrain (SPT), the so-called "Tiger Stripes", during two consecutive flybys (E17 and E18) in 2012. The spacecraft passed through the dense plume with a moderate velocity of ~7.5km/s, horizontally to the SPT with a closest approach (CA) at an altitude of ~75km almost directly over the south pole. In both flybys, spectra were recorded during a time interval of ~ ±3 minutes with respect to the closest approach achieving an average sampling rate of about 0.6 sec-1. We assume that the spacecraft passed through the plume during an interval of about ±60(sec) from the CA. Particles encountered before and after this period are predominately from the E-ring background in which Enceladus is embedded. Most CDA TOF-mass spectra are identified as one of three compositional types: (i) almost pure water (ii) organic rich and (iii) salt rich [2]. A Boxcar Analysis (BCA) is performed from a count database for compositional mapping of the plume along the space-craft trajectory. In BCA, counts of each spectrum type are integrated for a certain interval of time (box size). The integral of counts represents frequencies of compositional types in absolute abundances, which are converted later into proportions. This technique has been proven to be a suitable for inferring the compositional profiles from an earlier flyby (E5) [1]. The inferred compositional profiles show similar trends on E17 and E18. The abundances of different compositional types in the plume clearly differ from the Ering background and imply a compositional differentiation inside the plume. Following up the work of Schmidt et al, 2008 and Postberg et al, 2011 we can link different compositional types to different origins. The E17/E18 results are compared with the E5 flyby in 2008, which yielded the currently best compositional profile [2] but was executed at much

  13. On the great plume debate

    Institute of Scientific and Technical Information of China (English)

    Yaoling Niu

    2005-01-01

    @@ 1 Introductory note Geological processes are ultimately consequences of Earth's thermal evolution. Plate tectonic theory, which explains geological phenomena along plate boundaries, elegantly illustrates this concept. For example, the origin of oceanic plates at ocean ridges, the movement and growth of these plates, and their ultimate consumption back into the Earth's deep interior through subduction zones provide an efficient mechanism to cool the earth's mantle, leading to large-scale mantle convection. Mantle plumes, which explain another set of global geological phenomena such as within-plate volcanism, cool the earth's deep interior (probably the Earth's core) and represent another mode of Earth's thermal convection. Plate tectonic theory and mantle plume hypothesis thus complement each other to explain much of the whole picture of Earth processes and phenomena.

  14. Filter Fabrics for Airport Drainage.

    Science.gov (United States)

    1979-09-01

    Systems for *r- field Pavements," Harry R. Cedergren . d. "Development of Guidelines for the Design of Subsurfac( Drainage Systems for Highway Pavement...Structural 4Sectic s," H. R. Cedergren , J. A. Arman, and K. H. O’Brien. e. Drainage of Highway and Airfield Pavements, Harry R. Cedergren .> Five...by Cedergren (974).5 Additionally, several references were used, particularly those describing experimental anu construction prolects using filter

  15. Comparison of the measured and modeled electron densities and temperatures in the ionosphere and plasmasphere during the period 25-29 June 1990

    Science.gov (United States)

    Pavlov, A. V.; Abe, T.; Oyama, K.-I.

    2001-04-01

    We present a comparison of the electron density and temperature behavior measured in the ionosphere by the Millstone Hill incoherent-scatter radar during the period 25-29 June 1990, and in the plasmasphere within the Millstone Hill magnetic field flux tube by the instruments on board of the EXOS-D satellite in the Northern Hemisphere between 02:07:56 UT and 02:11:08 UT on 28 June 1990 with numerical model calculations from a time-dependent mathematical model of the Earth's ionosphere and plasmasphere. We have evaluated the value of the nighttime additional heating rate that should be added to the normal photoelectron heating in the electron energy equation in the plasmasphere region above 5000 km along the magnetic field line to explain the high electron temperature measured by the instruments on board of the EXOS-D satellite. The additional heating brings the measured and modeled electron temperatures into agreement with the plasmasphere and into very large disagreement with the ionosphere if the classical electron heat flux along magnetic field line is used in the model. The approach of Pavlov et al. (Annales Geophysicae 18 (2000) 1257-1272) based on an effective electron thermal conductivity coefficient along the magnetic field line, is used to explain the measured electron temperature in the ionosphere and plasmasphere. This approach leads to a heat flux which is less than that given by the classical Spitzer-Harm theory. The evaluated additional heating of electrons in the plasmasphere and the decrease of the thermal conductivity in the topside ionosphere and the greater part of the plasmasphere allow the model to accurately reproduce the electron temperatures observed by the instruments on board of the EXOS-D satellite in the plasmasphere and the Millstone Hill incoherent-scatter radar in the ionosphere. The resulting effect of vibrationally excited N2 and O2 on NmF2 is the decrease of the calculated daytime NmF2 up to a factor of 2. The modeled electron

  16. Akebono (EXOS-D) sounder data archive for studies of the ionosphere and plasmasphere

    Science.gov (United States)

    Kumamoto, A.; Katoh, Y.; Obara, T.

    2016-12-01

    For the purpose of topside sounding of the ionosphere and active experiments of the plasma waves in geospace, a sounder system was installed on the Akebono (EXOS-D) satellite, which was operated in a period from 1989 to 2015. Through the long operation period, the sounder system was also operated successfully, and brought us 117,468 ionograms in a frequency range from 0.02-0.89 MHz and 31,936 ionograms in a frequency range from 0.3-11.4 MHz taken within 2.6 Re. In order to provide the data to world-wide researchers' use, we are preparing data archive of Akebono Sounder data in Common Data Format (CDF) and Planetary Data System (PDS) format. Calibrated ionograms will be provided as Level-2 data. In addition, we are going to perform echo trace of the ionograms, and derive the vertical profile of the electron number density below the satellite. The horizontal and vertical distribution of the number density of the topside ionosphere along the satellite path will be provided as Level-3 data. However, because we need some efforts in manual echo tracing with numerous ionograms, it will take some time to finish the release of Level-3 data. So, we are going to prepare another simplified Leve-3 data, which provides the horizontal and apparent (assuming light-speed propagation) vertical distribution of the reflection point of the echo at some fixed frequency. The dataset will be enough useful in finding irregular plasma structures around auroral ionosphere and storm-time plasmasphere.

  17. AUTOSCALA software improvements: topside-plasmasphere profiles and TEC model assisted by AIS ionosonde measurements

    Science.gov (United States)

    Cesaroni, C.; Ippolito, A.; Scotto, C.; Ciraolo, L.

    2012-12-01

    The group of Upper Atmosphere Physics at INGV (Istituto Nazionale di Geofisica e Vulcanologia) developed Autoscala, a computer program for automatic scaling of the critical frequency foF2 and other ionospheric parameters derived from ionograms. Autoscala includes a routine that automatically estimates the electron density profile below F layer peak height hmF2, by adjusting the parameters of a model according to the recorded ionogram [Scotto (2009)]. Recently we have introduced a new algorithm for modeling upper ionosphere and plasmasphere electron density profiles following the approach suggested by Kutiev et al. (2009). In particular, these model uses the parameters of F layer peak (foF2, hmF2, scale height at hmF2) to obtain scale heights that are useful to construct H- and O+ density profiles, and consequently N(h) profile (given as the sum of the former two). Integrating electron density profiles we are then able to obtain a real time TEC estimation above the considered ionospheric station. A first validation of the model is carried out for data measured at Rome ionospheric station (Italy, 41°54' N 12°28' E) using independent TEC measurements from GPS receivers. References: Scotto, C. (2009). Electron density profile calculation technique for Autoscala ionogram analysis. Advances in Space Research, 44(6), 756-766. doi:10.1016/j.asr.2009.04.037 Kutiev, I., Marinov, P., Belehaki, a., Reinisch, B., & Jakowski, N. (2009). Reconstruction of topside density profile by using the topside sounder model profiler and digisonde data. Advances in Space Research, 43(11), 1683-1687. doi:10.1016/j.asr.2008.08.017

  18. He+ dominance in the plasmasphere during geomagnetically disturbed periods: 1. Observational results

    Directory of Open Access Journals (Sweden)

    C. R. Wilford

    Full Text Available Observations made by the DMSP F10 satellite during the recovery phase from geomagnetic disturbances in June 1991 show regions of He+ dominance around 830 km altitude at 09:00 MLT. These regions are co-located with a trough in ionisation observed around 55° in the winter hemisphere. Plasma temperature and concentration observations made during the severe geomagnetic storm of 24 March 1991 are used as a case study to determine the effects of geomagnetic disturbances along the orbit of the F10 satellite. Previous explanations for He+ dominance in this trough region relate to the part of the respective flux tubes that is in darkness. Such conditions are not relevant for this study, since the whole of the respective flux tubes are sunlit. A new mechanism is proposed to explain the He+ dominance in the trough region. This mechanism is based on plasma transport and chemical reaction effects in the F-region and topside ionosphere, and on the time scales for such chemical reactions. Flux tubes previously depleted by geomagnetic storm effects refill during the recovery phase from the ionosphere as a result of pressure differences along the flux tubes. Following a geomagnetic disturbance, the He+ ion recovers quickly via the rapid photoionisation of neutral helium, in the F-region and the topside. The recovery of the O+ and H+ ions is less rapid. This is proposed as a result of the respective charge exchange reactions with neutral atomic hydrogen and oxygen. Preliminary model calculations support the proposed mechanism.Key words. Magnetospheric physics (storms and sub-storms, plasmasphere

  19. Transverse eV ion heating by random electric field fluctuations in the plasmasphere

    Science.gov (United States)

    Artemyev, A. V.; Mourenas, D.; Agapitov, O. V.; Blum, L.

    2017-02-01

    Charged particle acceleration in the Earth inner magnetosphere is believed to be mainly due to the local resonant wave-particle interaction or particle transport processes. However, the Van Allen Probes have recently provided interesting evidence of a relatively slow transverse heating of eV ions at distances about 2-3 Earth radii during quiet times. Waves that are able to resonantly interact with such very cold ions are generally rare in this region of space, called the plasmasphere. Thus, non-resonant wave-particle interactions are expected to play an important role in the observed ion heating. We demonstrate that stochastic heating by random transverse electric field fluctuations of whistler (and possibly electromagnetic ion cyclotron) waves could explain this weak and slow transverse heating of H+ and O+ ions in the inner magnetosphere. The essential element of the proposed model of ion heating is the presence of trains of random whistler (hiss) wave packets, with significant amplitude modulations produced by strong wave damping, rapid wave growth, or a superposition of wave packets of different frequencies, phases, and amplitudes. Such characteristics correspond to measured characteristics of hiss waves in this region. Using test particle simulations with typical wave and plasma parameters, we demonstrate that the corresponding stochastic transverse ion heating reaches 0.07-0.2 eV/h for protons and 0.007-0.015 eV/h for O+ ions. This global temperature increase of the Maxwellian ion population from an initial Ti˜0.3 eV could potentially explain the observations.

  20. Transverse eV Ion Heating by Random Electric Field Fluctuations in the Plasmasphere

    Science.gov (United States)

    Artemyev, A. V.; Mourenas, D.; Agapitov, O. V.; Blum, L.

    2017-01-01

    Charged particle acceleration in the Earth inner magnetosphere is believed to be mainly due to the local resonant wave-particle interaction or particle transport processes. However, the Van Allen Probes have recently provided interesting evidence of a relatively slow transverse heating of eV ions at distances about 2-3 Earth radii during quiet times. Waves that are able to resonantly interact with such very cold ions are generally rare in this region of space, called the plasmasphere. Thus, non-resonant wave-particle interactions are expected to play an important role in the observed ion heating. We demonstrate that stochastic heating by random transverse electric field fluctuations of whistler (and possibly electromagnetic ion cyclotron) waves could explain this weak and slow transverse heating of H+ and O+ ions in the inner magnetosphere. The essential element of the proposed model of ion heating is the presence of trains of random whistler (hiss) wave packets, with significant amplitude modulations produced by strong wave damping, rapid wave growth, or a superposition of wave packets of different frequencies, phases, and amplitudes. Such characteristics correspond to measured characteristics of hiss waves in this region. Using test particle simulations with typical wave and plasma parameters, we demonstrate that the corresponding stochastic transverse ion heating reaches 0.07-0.2 eV/h for protons and 0.007-0.015 eV/h for O+ ions. This global temperature increase of the Maxwellian ion population from an initial Ti approx. 0.3 eV could potentially explain the observations.

  1. DRAINAGE AND FLEXIBLE PAVEMENT PERFORMANCE

    Directory of Open Access Journals (Sweden)

    SIDDHARTHA ROKADE

    2012-04-01

    Full Text Available Providing adequate drainage to a pavement system has been considered as an important design consideration to prevent premature failures due to water related problems such as pumping action, loss of support, and rutting, among others. Most water in pavements is due to rainfall infiltration into unsaturated pavement layers, throughjoints, cracks, shoulder edges, and various other defects, especially in older deteriorated pavements. Water also seep upward from a high groundwater table due to capillary suction or vapour movements, or it may flow laterally from the pavement edges and side ditches. Providing adequate drainage to a pavement system has been considered as an important design consideration to ensure satisfactory performance of the pavement, particularly from the perspective of life cycle cost and serviceability. To minimize premature pavement distresses and to enhance the pavement performance, it is imperative to provide adequate drainage to allow infiltrated water to drain out from the base and sub-base, thus avoiding saturation of base and subgrade soils. This paper deals with the analysis of the impact of subsurface drainage on pavement system performance. The requirement ofeffective subsurface drainage for pavement performance is also discussed.

  2. SAMI3 prediction of the impact of the 21 August 2017 total solar eclipse on the ionosphere/plasmasphere system

    Science.gov (United States)

    Huba, J. D.; Drob, D.

    2017-06-01

    We present quantitative predictions of the impact of the upcoming total solar eclipse on the ionosphere and plasmasphere using the Naval Research Laboratory (NRL) model Sami3 is Also a Model of the Ionosphere (SAMI3). The eclipse will occur over the continental United States on 21 August 2017. Our simulation results indicate that in the vicinity of the eclipse (1) the total electron content (TEC) decreases by up to ˜ 5 TEC units (TECU; 1 TECU = ×1016 m-2) which is a ˜ 35% decrease in TEC, (2) the electron density decreases by a factor of ˜ 50% in the F region, (3) the electron temperature decreases by up to ˜800 K in the plasmasphere, and (4) the O+ velocity changes from ˜40 m s-1 upward to ˜20 m s-1 downward in the F region. Interestingly, the continental size modification of the ionospheric conductance modifies the global electric field, which should lead to measurable changes in the TEC in the southern conjugate hemisphere (≲1 TECU).

  3. Relationship between plume and plate tectonics

    Science.gov (United States)

    Puchkov, V. N.

    2016-07-01

    The relationship between plate- and plume-tectonics is considered in view of the growth and breakdown of supercontinents, active rifting, the formation of passive volcanic-type continental margins, and the origin of time-progressive volcanic chains on oceanic and continental plates. The mantle wind phenomenon is described, as well as its effect on plume morphology and anisotropy of the ambient mantle. The interaction of plumes and mid-ocean ridges is discussed. The principles and problems of plume activity analysis in subduction- and collision-related foldbelts are considered and illustrated with examples.

  4. Redox conditions for mantle plumes

    Science.gov (United States)

    Heister, L. E.; Lesher, C. E.

    2005-12-01

    The vanadium to scandium ratio (V/Sc) for basalts from mid-ocean ridge (MOR) and arc environments has been proposed as a proxy for fO2 conditions during partial melting (e.g. [1] and [2]). Contrary to barometric measurements of the fO2 of primitive lavas, the V/Sc ratio of the upper mantle at mid-ocean ridges and arcs is similar, leading previous authors to propose that the upper mantle has uniform redox potential and is well-buffered. We have attempted to broaden the applicability of the V/Sc parameter to plume-influenced localities (both oceanic and continental), where mantle heterogeneities associated with recycled sediments, mafic crust, and metasomatized mantle, whether of shallow or deep origin, exist. We find that primitive basalts from the North Atlantic Igneous Province (NAIP), Hawaii (both the Loa and Kea trends), Deccan, Columbia River, and Siberian Traps show a range of V/Sc ratios that are generally higher (average ~9) than those for MOR (average ~ 6.7) or arc (average ~7) lavas. Based on forward polybaric decompression modeling, we attribute these differences to polybaric melting and melt segregation within the garnet stability field rather than the presence of a more oxidized mantle in plume-influenced settings. Like MORB, the V/Sc ratios for plume-influenced basalts can be accounted for by an oxidation state approximately one log unit below the Ni-NiO buffer (NNO-1). Our analysis suggests that source heterogeneities have little, if any, resolvable influence on mantle redox conditions, although they have significant influence on the trace element and isotopic composition of mantle-derived melts. We suggest that variations in the redox of erupted lavas is largely a function of shallow lithospheric processes rather than intrinsic to the mantle source, regardless of tectonic setting. [1] Li and Lee (2004) EPSL, [2] Lee et al. (2005) J. of Petrology

  5. Pulsed Plasma Thruster plume analysis

    Energy Technology Data Exchange (ETDEWEB)

    Parker, K. [Washington Univ., Aerospace and Energetics Research Program, Seattle, WA (United States)

    2003-11-01

    Micro-Pulsed Plasma Thrusters ({mu}PPTs) are a promising method for precision attitude control for small spacecraft in formation flying. They create an ionized plasma plume, which may interfere with other spacecraft in the formation. To characterize the ions in the plume, a diagnostic has been built that couples a drift tube with an energy analyzer. The drift tube provides time of flight measurements to determine the exhaust velocity, and the energy analyzer discriminates the ion energies. The energy analyzer measures the current on a collector plate downstream of four grids that repel electrons and ions below a specified energy. The first grid lowers the density of the plasma, therefore increasing Debye length. The second and fourth grids have a negative potential applied to them so they repel the electrons, while the third grid's voltage can be varied to repel lower energy ions. The ion energies can be computed by differentiating the data. Combining the information of the ion energies and their velocities identifies the ion masses in the PPT plume. The PPT used for this diagnostic is the micro-PPT developed for the Dawgstar satellite. This PPT uses 5.2 Joules per pulse and has a 2.3 cm{sup 2} propellant area, a 1.3 cm electrode length, and an estimated thrust of 85 {mu}N [C. Rayburn et al., AIAA-2000-3256]. This paper will describe the development and design of the time of flight/gridded energy analyzer diagnostic and present recent experimental results. (Author)

  6. Plume spread and atmospheric stability

    Energy Technology Data Exchange (ETDEWEB)

    Weber, R.O. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    The horizontal spread of a plume in atmospheric dispersion can be described by the standard deviation of horizontal direction. The widely used Pasquill-Gifford classes of atmospheric stability have assigned typical values of the standard deviation of horizontal wind direction and of the lapse rate. A measured lapse rate can thus be used to estimate the standard deviation of wind direction. It is examined by means of a large dataset of fast wind measurements how good these estimates are. (author) 1 fig., 2 refs.

  7. Characteristics of bubble plumes, bubble-plume bubbles and waves from wind-steepened wave breaking

    NARCIS (Netherlands)

    Leifer, I.; Caulliez, G.; Leeuw, G. de

    2007-01-01

    Observations of breaking waves, associated bubble plumes and bubble-plume size distributions were used to explore the coupled evolution of wave-breaking, wave properties and bubble-plume characteristics. Experiments were made in a large, freshwater, wind-wave channel with mechanical wind-steepened w

  8. Technical note on drainage systems

    DEFF Research Database (Denmark)

    Bentzen, Thomas Ruby

    This technical note will present simple but widely used methods for the design of drainage systems. The note will primarily deal with surface water (rainwater) which on a satisfactorily way should be transport into the drainage system. Traditional two types of sewer systems exist: A combined system......’s not major different than described below - just remember to include this contribution for combined systems where the surface water (rain) and sewage are carried in the same pipes in the system and change some of the parameters for failure allowance (this will be elaborated further later on). The technical...

  9. Radiation Chemistry of Potential Europa Plumes

    Science.gov (United States)

    Gudipati, M. S.; Henderson, B. L.

    2014-12-01

    Recent detection of atomic hydrogen and atomic oxygen and their correlation to potential water plumes on Europa [Roth, Saur et al. 2014] invoked significant interest in further understanding of these potential/putative plumes on Europa. Unlike on Enceladus, Europa receives significant amount of electron and particle radiation. If the plumes come from trailing hemisphere and in the high radiation flux regions, then it is expected that the plume molecules be subjected to radiation processing. Our interest is to understand to what extent such radiation alterations occur and how they can be correlated to the plume original composition, whether organic or inorganic in nature. We will present laboratory studies [Henderson and Gudipati 2014] involving pulsed infrared laser ablation of ice that generates plumes similar to those observed on Enceladus [Hansen, Esposito et al. 2006; Hansen, Shemansky et al. 2011] and expected to be similar on Europa as a starting point; demonstrating the applicability of laser ablation to simulate plumes of Europa and Enceladus. We will present results from electron irradiation of these plumes to determine how organic and inorganic composition is altered due to radiation. Acknowledgments:This research was enabled through partial funding from NASA funding through Planetary Atmospheres, and the Europa Clipper Pre-Project. B.L.H. acknowledges funding from the NASA Postdoctoral Program for an NPP fellowship. Hansen, C. J., L. Esposito, et al. (2006). "Enceladus' water vapor plume." Science 311(5766): 1422-1425. Hansen, C. J., D. E. Shemansky, et al. (2011). "The composition and structure of the Enceladus plume." Geophysical Research Letters 38. Henderson, B. L. and M. S. Gudipati (2014). "Plume Composition and Evolution in Multicomponent Ices Using Resonant Two-Step Laser Ablation and Ionization Mass Spectrometry." The Journal of Physical Chemistry A 118(29): 5454-5463. Roth, L., J. Saur, et al. (2014). "Transient Water Vapor at Europa's South

  10. Variability and Composition of Io's Pele Plume

    Science.gov (United States)

    Jessup, K. L.; Spencer, J.; Yelle, R.

    2004-11-01

    The Pele plume is one of the largest and most dynamic of the plumes on Io. While sulfur dioxide (SO2) gas was always assumed to be a constituent of this plume, spectral observations obtained in 1999 were the first to positively identify elemental sulfur (S2) (Spencer et al. 2000) within the Pele plume. The S2/SO2 ratio derived from this observation provided a critical component necessary for the constraint of the magma chemistry and vent conditions of the Pele plume (Zolotov and Fegley 1998). But, because the Pele plume has long been known to be variable in its eruptive behavior, it is not likely that the vent conditions are invariant. Consequently, additional observations were needed to constrain the extent of the variability of the plume's composition and gas abundances. To this end, in February 2003, March 2003 and January 2004 we obtained spectra of Pele with Hubble's Space Telescope Imaging Spectrograph (STIS) in transit of Jupiter, using the 0.1 arcsec slit, for the wavelength region extending from 2100-3100 Å. Contemporaneous with the spectral data we also obtained UV and visible-wavelength images of the plume in reflected sunlight with the Advanced Camera for Surveys (ACS) prior to Jupiter transit, in order to constrain plume dust abundance. The newly acquired STIS data show both the S2 and SO2 absorption signatures, and provide concrete evidence of temporal variability in the abundance of these gases. Likewise, the degree of dust scattering recorded in the ACS data varied as a function of the date of observation. We will present preliminary constraints on the composition and variability of the gas abundances of the Pele plume as recorded within the STIS data. We will also give a brief overview of the variability of the plume dust signatures relative to the gas signatures as a function of time.

  11. Skylon Aerodynamics and SABRE Plumes

    Science.gov (United States)

    Mehta, Unmeel; Afosmis, Michael; Bowles, Jeffrey; Pandya, Shishir

    2015-01-01

    An independent partial assessment is provided of the technical viability of the Skylon aerospace plane concept, developed by Reaction Engines Limited (REL). The objectives are to verify REL's engineering estimates of airframe aerodynamics during powered flight and to assess the impact of Synergetic Air-Breathing Rocket Engine (SABRE) plumes on the aft fuselage. Pressure lift and drag coefficients derived from simulations conducted with Euler equations for unpowered flight compare very well with those REL computed with engineering methods. The REL coefficients for powered flight are increasingly less acceptable as the freestream Mach number is increased beyond 8.5, because the engineering estimates did not account for the increasing favorable (in terms of drag and lift coefficients) effect of underexpanded rocket engine plumes on the aft fuselage. At Mach numbers greater than 8.5, the thermal environment around the aft fuselage is a known unknown-a potential design and/or performance risk issue. The adverse effects of shock waves on the aft fuselage and plumeinduced flow separation are other potential risks. The development of an operational reusable launcher from the Skylon concept necessitates the judicious use of a combination of engineering methods, advanced methods based on required physics or analytical fidelity, test data, and independent assessments.

  12. Integrated characterisation of aquifer heterogeneity and landfill leachate plume migration

    Science.gov (United States)

    Tremblay, L.; Lefebvre, R.; Gloaguen, E.; Paradis, D.

    2009-05-01

    The understanding of groundwater flow and contaminant migration is based on our ability to characterize aquifers and represent these processes with numerical simulators. This understanding is required to efficiently remediate contaminated sites since the failure of remediation actions are often related to an insufficient understanding of aquifer heterogeneity. During the last decades, continuous development of numerical simulators allowed models to better represent complex flow systems. However, conventional hydrogeological characterization methods do not provide the data required to define aquifer heterogeneity. An original hydrogeological characterization approach was used to define aquifer heterogeneity and delineate landfill leachate plumes through the use and integration of varied techniques. The objective of the study is to develop a methodology to integrate hydrogeological, geophysical and geochemical data using geostatistical tools. The characterization program aims to better characterize the aquifer, delineate leachate plumes emitted by a former landfill, and guide a study of the natural attenuation of the plumes. The initial phase of the integrated multidisciplinary aquifer characterization program was carried out in a 12 km2 area of the sub-watershed surrounding the landfill of St-Lambert-de-Lauzon, Québec. In the study area, a 10-m thick sandy unconfined aquifer overlies clayey silt and till layers. In this relatively flat area, natural streams as well as agricultural and forestry drainage networks control groundwater flow. The first phase of the project focused on a regional hydrogeological and geochemical characterization where 5 field methods were combined: 1) surface geophysics (ground penetrating radar and electrical tomography) (GPR); 2) direct-push methods including a) cone penetration tests (CPT), b) soil sampling and c) installation of full- screened observation wells; 3) multilevel measurement of geochemical parameters and groundwater

  13. Proceedings of plumes, plates and mineralisation symposium: an introduction

    CSIR Research Space (South Africa)

    Hatton, CJ

    1997-12-01

    Full Text Available of plume-theory. Mechanisms of magma formation are identified and plume positions and distances to their surface expression considered. Mantle plumes are considered as a heat and fluid source for the Witwatersrand gold deposits....

  14. Numerical modeling of mantle plume diffusion

    Science.gov (United States)

    Krupsky, D.; Ismail-Zadeh, A.

    2004-12-01

    To clarify the influence of the heat diffusion on the mantle plume evolution, we develop a two-dimensional numerical model of the plume diffusion and relevant efficient numerical algorithm and code to compute the model. The numerical approach is based on the finite-difference method and modified splitting algorithm. We consider both von Neumann and Direchlet conditions at the model boundaries. The thermal diffusivity depends on pressure in the model. Our results show that the plume is disappearing from the bottom up - the plume tail at first and its head later - because of the mantle plume geometry (a thin tail and wide head) and higher heat conductivity in the lower mantle. We study also an effect of a lateral mantle flow associated with the plate motion on the distortion of the diffusing mantle plume. A number of mantle plumes recently identified by seismic tomography seem to disappear in the mid-mantle. We explain this disappearance as the effect of heat diffusion on the evolution of mantle plume.

  15. Aggregate Particles in the Plumes of Enceladus

    CERN Document Server

    Gao, Peter; Zhang, Xi; Ingersoll, Andrew P

    2015-01-01

    Estimates of the total particulate mass of the plumes of Enceladus are important to constrain theories of particle formation and transport at the surface and interior of the satellite. We revisit the calculations of Ingersoll and Ewald (2011), who estimated the particulate mass of the Enceladus plumes from strongly forward scattered light in Cassini ISS images. We model the plume as a combination of spherical particles and irregular aggregates resulting from the coagulation of spherical monomers, the latter of which allows for plumes of lower particulate mass. Though a continuum of solutions are permitted by the model, the best fits to the ISS data consist either of low mass plumes composed entirely of small aggregates or high mass plumes composed of large aggregates and spheres. The high mass plumes can be divided into a population of large aggregates with total particulate mass of 116 +/- 12 X 10^3 kg, and a mixed population of spheres and aggregates consisting of a few large monomers that has a total plume...

  16. Infrared Sensing of Buoyant Surface Plumes

    DEFF Research Database (Denmark)

    Petersen, Ole; Larsen, Torben

    1988-01-01

    This paper is concerned with laboratory experiments on buoyant surface plumes where heat is the source of buoyancy. Temperature distributions were measured at the water surface using infra-red sensing, and inside the waterbody a computer based measurement system was applied. The plume is described...

  17. Percutaneous drainage of abdominal abcess

    Energy Technology Data Exchange (ETDEWEB)

    Men, Sueleyman E-mail: suleyman.men@deu.edu.tr; Akhan, Okan; Koeroglu, Mert

    2002-09-01

    The mortality in undrained abdominal abscesses is high with a mortality rate ranging between 45 and 100%. The outcome in abdominal abscesses, however, has improved due to advances in image guided percutaneous interventional techniques. The main indications for the catheter drainage include treatment or palliation of sepsis associated with an infected fluid collection, and alleviation of the symptoms that may be caused by fluid collections by virtue of their size, like pancreatic pseudocele or lymphocele. The single liver abscesses may be drained with ultrasound guidance only, whereas the multiple abscesses usually require computed tomography (CT) guidance and placement of multiple catheters. The pancreatic abscesses are generally drained routinely and urgently. Non-infected pancreatic pseudocysts may be simply observed unless they are symptomatic or cause problems such as pain or obstruction of the biliary or the gastrointestinal tract. Percutaneous routes that have been described to drain pelvic abscesses include transrectal or transvaginal approach with sonographic guidance, a transgluteal, paracoccygeal-infragluteal, or perineal approach through the greater sciatic foramen with CT guidance. Both the renal and the perirenal abscesses are amenable to percutaneous drainage. Percutaneous drainage provides an effective and safe alternative to more invasive surgical drainage in most patients with psoas abscesses as well.

  18. Modelling oil plumes from subsurface spills.

    Science.gov (United States)

    Lardner, Robin; Zodiatis, George

    2017-07-11

    An oil plume model to simulate the behavior of oil from spills located at any given depth below the sea surface is presented, following major modifications to a plume model developed earlier by Malačič (2001) and drawing on ideas in a paper by Yapa and Zheng (1997). The paper presents improvements in those models and numerical testing of the various parameters in the plume model. The plume model described in this paper is one of the numerous modules of the well-established MEDSLIK oil spill model. The deep blowout scenario of the MEDEXPOL 2013 oil spill modelling exercise, organized by REMPEC, has been applied using the improved oil plume module of the MEDSLIK model and inter-comparison with results having the oil spill source at the sea surface are discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Definition of the drainage filter problem

    NARCIS (Netherlands)

    Zaslavsky, D.

    1977-01-01

    It is common to consider the following: I. Retention of soil particles that may enter the drainage pipe and cause its clogging. For some sensitive structures it is important to prevent settlements due to soil transportation by drainage water.

  20. Galileo observations of volcanic plumes on Io

    Science.gov (United States)

    Geissler, P.E.; McMillan, M.T.

    2008-01-01

    Io's volcanic plumes erupt in a dazzling variety of sizes, shapes, colors and opacities. In general, the plumes fall into two classes, representing distinct source gas temperatures. Most of the Galileo imaging observations were of the smaller, more numerous Prometheus-type plumes that are produced when hot flows of silicate lava impinge on volatile surface ices of SO2. Few detections were made of the giant, Pele-type plumes that vent high temperature, sulfur-rich gases from the interior of Io; this was partly because of the insensitivity of Galileo's camera to ultraviolet wavelengths. Both gas and dust spout from plumes of each class. Favorably located gas plumes were detected during eclipse, when Io was in Jupiter's shadow. Dense dust columns were imaged in daylight above several Prometheus-type eruptions, reaching heights typically less than 100 km. Comparisons between eclipse observations, sunlit images, and the record of surface changes show that these optically thick dust columns are much smaller in stature than the corresponding gas plumes but are adequate to produce the observed surface deposits. Mie scattering calculations suggest that these conspicuous dust plumes are made up of coarse grained “ash” particles with radii on the order of 100 nm, and total masses on the order of 106 kg per plume. Long exposure images of Thor in sunlight show a faint outer envelope apparently populated by particles small enough to be carried along with the gas flow, perhaps formed by condensation of sulfurous “snowflakes” as suggested by the plasma instrumentation aboard Galileo as it flew through Thor's plume [Frank, L.A., Paterson, W.R., 2002. J. Geophys. Res. (Space Phys.) 107, doi:10.1029/2002JA009240. 31-1]. If so, the total mass of these fine, nearly invisible particles may be comparable to the mass of the gas, and could account for much of Io's rapid resurfacing.

  1. Percutaneous catheter drainage of intrapulmonary fluid collection

    Energy Technology Data Exchange (ETDEWEB)

    Park, E. D.; Kim, H. J.; Choi, P. Y.; Jung, S. H. [Gyeongsang National University Hospital, Chinju (Korea, Republic of)

    1994-01-15

    With the success of percutaneous abdominal abscess drainage, attention is now being focused on the use of similar techniques in the thorax. We studied to evaluate the effect of percutaneous drainage in parenchymal fluid collections in the lungs. We performed percutaneous drainage of abscesses and other parenchymal fluid collections of the lungs in 15 patients. All of the procedures were performed under the fluoroscopic guidance with an 18-gauge Seldinger needle and coaxial technique with a 8-10F drainage catheter. Among 10 patients with lung abscess, 8 patients improved by percutaneous catheter drainage. In one patient, drainage was failed by the accidental withdrawal of the catheter before complete drainage. One patient died of sepsis 5 hours after the procedure. Among three patients with complicated bulla, successful drainage was done in two patients, but in the remaining patient, the procedure was failed. In one patient with intrapulmonary bronchogenic cyst, the drainage was not successful due to the thick internal contents. In one patient with traumatic hematoma, after the drainage of old blood clots, the signs of infection disappeared. Overally, of 14 patients excluding one who died, 11 patients improved with percutaneous catheter drainage and three patients did not. There were no major complications during and after the procedure. We conclude that percutaneous catheter drainage is effective and safe procedure for the treatment of parenchymal fluid collections of the lung in patients unresponsive to the medical treatment.

  2. Comparison of the measured and modelled electron densities and temperatures in the ionosphere and plasmasphere during 20-30 January, 1993

    Directory of Open Access Journals (Sweden)

    A. V. Pavlov

    Full Text Available We present a comparison of the electron density and temperature behaviour in the ionosphere and plasmasphere measured by the Millstone Hill incoherent-scatter radar and the instruments on board of the EXOS-D satellite with numerical model calculations from a time-dependent mathematical model of the Earth's ionosphere and plasmasphere during the geomagnetically quiet and storm period on 20–30 January, 1993. We have evaluated the value of the additional heating rate that should be added to the normal photoelectron heating in the electron energy equation in the daytime plasmasphere region above 5000 km along the magnetic field line to explain the high electron temperature measured by the instruments on board of the EXOS-D satellite within the Millstone Hill magnetic field flux tube in the Northern Hemisphere. The additional heating brings the measured and modelled electron temperatures into agreement in the plasmasphere and into very large disagreement in the ionosphere if the classical electron heat flux along magnetic field line is used in the model. A new approach, based on a new effective electron thermal conductivity coefficient along the magnetic field line, is presented to model the electron temperature in the ionosphere and plasmasphere. This new approach leads to a heat flux which is less than that given by the classical Spitzer-Harm theory. The evaluated additional heating of electrons in the plasmasphere and the decrease of the thermal conductivity in the topside ionosphere and the greater part of the plasmasphere found for the first time here allow the model to accurately reproduce the electron temperatures observed by the instruments on board the EXOS-D satellite in the plasmasphere and the Millstone Hill incoherent-scatter radar in the ionosphere. The effects of the daytime additional plasmaspheric heating of electrons on the electron temperature and density are small at the F-region altitudes if the modified electron heat flux

  3. Enhancements of magnetospheric convection electric field associated with sudden commencements in the inner magnetosphere and plasmasphere regions

    Science.gov (United States)

    Shinbori, A.; Ono, T.; Iizima, M.; Kumamoto, A.; Nishimura, Y.

    2006-01-01

    Electric field variations in the inner magnetosphere and plasmasphere regions associated with sudden commencements (SCs) are investigated by using the observation data of the Akebono satellite which has been carried out more than 15 years since 1989. 117 of 153 SC events in the low-latitude (MLAT bi-polar waveform due to the passage of fast-mode hydromagnetic (HM) waves. The increase of the convection electric field takes place in the entire magnetic local time sector in the inner magnetosphere. The amplitude does not depend on L-value and magnetic local time but is proportional to the SC amplitude measured at Kakioka. The majority of the electric field enhancements persist for about 4 14 min. The origin of the convection electric field in the inner magnetosphere is a plasma motion caused by the compression of the magnetosphere due to the solar wind shock and discontinuity.

  4. ISEE 1 observations of thermal plasma in the vicinity of the plasmasphere during periods of quieting magnetic activity

    Science.gov (United States)

    Horwitz, J. L.; Baugher, C. R.; Chappell, C. R.; Shelley, E. G.; Young, D. T.; Anderson, R. R.

    1981-11-01

    An investigation of thermal plasma behavior in the vicinity of the plasmasphere during periods of quieting magnetic activity was conducted by combining thermal ion observations made with the plasma composition experiment on ISEE 1 with plasma density profiles obtained from plasma frequency measurements made with the same satellite's plasma wave experiment. During periods in which the magnetic activity quiets, the two regions characterized by H(+):He(+):O(+) (isotropic) and H(+):O(+):He(+) (field-aligned) ion species distributions (in order of dominance) are separated by a new region in which low-energy H(+) and He(+) are found flowing along the magnetic field lines. At other times, following quieting magnetic activity, distributions having peak fluxes at 90 deg pitch angle are observed in this region.

  5. Intra-plasmaspheric wave power density deduced from long-term DEMETER measurements of terrestrial VLF transmitter wave amplitudes

    Science.gov (United States)

    Lauben, D.; Cohen, M.; Inan, U.

    2012-12-01

    We deduce the 3d intra-plasmaspheric distribution of VLF wave power between conjugate regions of strong VLF wave amplitudes as measured by DEMETER for high-power terrestrial VLF transmitters during its ~6-yr lifetime. We employ a mixed WKB/full-wave technique to solve for the primary and secondary electromagnetic and electrostatic waves which are transmitted and reflected from strong cold-plasma density gradients and posited irregularities, in order to match the respective end-point measured amplitude distributions. Energy arriving in the conjugate region and also escaping to other regions of the magnetosphere is note. The resulting 3d distribution allows improved estimates for the long-term average particle scattering induced by terrestrial VLF transmitters.

  6. Digital filtering of plume emission spectra

    Science.gov (United States)

    Madzsar, George C.

    1990-01-01

    Fourier transformation and digital filtering techniques were used to separate the superpositioned spectral phenomena observed in the exhaust plumes of liquid propellant rocket engines. Space shuttle main engine (SSME) spectral data were used to show that extraction of spectral lines in the spatial frequency domain does not introduce error, and extraction of the background continuum introduces only minimal error. Error introduced during band extraction could not be quantified due to poor spectrometer resolution. Based on the atomic and molecular species found in the SSME plume, it was determined that spectrometer resolution must be 0.03 nm for SSME plume spectral monitoring.

  7. Merging Thermal Plumes in the Indoor Environment

    DEFF Research Database (Denmark)

    Bjørn, Erik; Nielsen, Peter V.

    This experimental work deals with the basic problem of merging thermal plumes from heat sources situated in the vicinity of each other. No studies have been made yet of how close two heat sources must be to each other, before they can be considered as a single source with a cumulative heat effect......, and how far apart they must be to be considered separate. Also, it is not known how the flow field behaves in the intermediate fase, where the plumes are neither completely joined nor completely separate. A possible, very simple, solution of the velocity distribution between two plumes is to assume...

  8. EUS-Guided Biliary Drainage

    Directory of Open Access Journals (Sweden)

    Marc Giovannini

    2012-01-01

    Full Text Available The echoendoscopic biliary drainage is an option to treat obstructive jaundices when ERCP drainage fails. These procedures compose alternative methods to the side of surgery and percutaneous transhepatic biliary drainage, and it was only possible by the continuous development and improvement of echoendoscopes and accessories. The development of linear setorial array echoendoscopes in early 1990 brought a new approach to diagnostic and therapeutic dimenion on echoendoscopy capabilities, opening the possibility to perform punction over direct ultrasonographic view. Despite of the high success rate and low morbidity of biliary drainage obtained by ERCP, difficulty could be found at the presence of stent tumor ingrown, tumor gut compression, periampulary diverticula, and anatomic variation. The echoendoscopic technique starts performing punction and contrast of the left biliary tree. When performed from gastric wall, the access is made through hepatic segment III. From duodenum, direct common bile duct punction. Dilatation is required before stent introduction, and a plastic or metallic stent is introduced. This phrase should be replaced by: diathermic dilatation of the puncturing tract is required using a 6F cystostome. The technical success of hepaticogastrostomy is near 98%, and complications are present in 36%: pneumoperitoneum, choleperitoneum, infection, and stent disfunction. To prevent bile leakage, we have used the 2 stent techniques, the first stent introduced was a long uncovered metallic stent (8 or 10 cm, and inside this first stent a second fully covered stent of 6 cm was delivered to bridge the bile duct and the stomach. Choledochoduodenostomy overall success rate is 92% and described complications include, in frequency order, pneumoperitoneum and focal bile peritonitis, present in 19%. By the last 10 years, the technique was especially performed in reference centers, by ERCP experienced groups, and this seems to be a general

  9. Exploring Agricultural Drainage's Influence on Wetland and ...

    Science.gov (United States)

    Artificial agricultural drainage (i.e. surface ditches or subsurface tile) is an important agricultural management tool. Artificial drainage allows for timely fieldwork and adequate root aeration, resulting in greater crop yields for farmers. This practice is widespread throughout many regions of the United States and the network of artificial drainage is especially extensive in flat, poorly-drained regions like the glaciated Midwest. While beneficial for crop yields, agricultural drains often empty into streams within the natural drainage system. The increased network connectivity may lead to greater contributing area for watersheds, altered hydrology and increased conveyance of pollutants into natural water bodies. While studies and models at broader scales have implicated artificial drainage as an important driver of hydrological shifts and eutrophication, the actual spatial extent of artificial drainage is poorly known. Consequently, metrics of wetland and watershed connectivity within agricultural regions often fail to explicitly include artificial drainage. We use recent agricultural census data, soil drainage data, and land cover data to create estimates of potential agricultural drainage across the United States. We estimate that agricultural drainage in the US is greater than 31 million hectares and is concentrated in the upper Midwest Corn Belt, covering greater than 50% of available land for 114 counties. Estimated drainage values for numerous countie

  10. Assessment of analytical techniques for predicting solid propellant exhaust plumes and plume impingement environments

    Science.gov (United States)

    Tevepaugh, J. A.; Smith, S. D.; Penny, M. M.

    1977-01-01

    An analysis of experimental nozzle, exhaust plume, and exhaust plume impingement data is presented. The data were obtained for subscale solid propellant motors with propellant Al loadings of 2, 10 and 15% exhausting to simulated altitudes of 50,000, 100,000 and 112,000 ft. Analytical predictions were made using a fully coupled two-phase method of characteristics numerical solution and a technique for defining thermal and pressure environments experienced by bodies immersed in two-phase exhaust plumes.

  11. Sensitivity of air quality simulation to smoke plume rise

    Science.gov (United States)

    Yongqiang Liu; Gary Achtemeier; Scott Goodrick

    2008-01-01

    Plume rise is the height smoke plumes can reach. This information is needed by air quality models such as the Community Multiscale Air Quality (CMAQ) model to simulate physical and chemical processes of point-source fire emissions. This study seeks to understand the importance of plume rise to CMAQ air quality simulation of prescribed burning to plume rise. CMAQ...

  12. Characteristics of the Great Whale River plume

    Science.gov (United States)

    Ingram, R. Grant

    1981-03-01

    Observations of the motion field and dilution effects associated with the plume of Great Whale River in Hudson Bay are presented for both open water and ice-covered conditions. In the summer months a distinct plume of about 100 km2 in area is formed offshore which is characterized by a 1-2 m thickness and large velocities directed away from the river mouth in contrast to slower currents parallel to the shore in the ambient waters underneath. Surface drifter results suggest that the outer boundary of plume may be a zone of frontal convergence. Under ice-covered conditions the plume was significantly thicker and extended much farther offshore in spite of a marked reduction in river runoff at this time.

  13. Mantle plumes: Why the current skepticism?

    Institute of Scientific and Technical Information of China (English)

    Gillian R. Foulger

    2005-01-01

    The present reappraisal of the mantle plume hypothesis is perhaps the most exciting current debate in Earth science. Nevertheless, the fundamental reasons for why it has arisen are often not well understood. They are that 1) many observations do not agree with the predictions of the original model, 2) it is possible that convection of the sort required to generate thermal plumes in the Earth's mantle does not occur, 3) so many variants of the original model have been invoked to accommodate conflicting data that the plume hypthesis is in practice no longer testable, and 4) alternative models are viable, though these have been largely neglected by researchers. Regardless of the final outcome, the present vigorous debate is to be welcomed since it is likely to stimulate new discoveries in a way that unquestioning acceptance of the conventional plume model will not.

  14. Plume Diagnostics for Combustion Stability Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Sierra Engineering Inc. and Purdue University propose to develop a non-intrusive plume instrument capable of detecting and diagnosing combustion instability. This...

  15. Hydroxyl Tagging Velocimetry for Rocket Plumes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To address the need for non-intrusive sensors for rocket plume properties, we propose a laser-based velocity diagnostic that does not require seeding, works in high...

  16. Novel plume deflection concept testing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed effort will explore the feasibility and effectiveness of utilizing an electrically driven thermal shield for use as part of rocket plume deflectors. To...

  17. Plume Ascent Tracker: Interactive Matlab software for analysis of ascending plumes in image data

    Science.gov (United States)

    Valade, S. A.; Harris, A. J. L.; Cerminara, M.

    2014-05-01

    This paper presents Matlab-based software designed to track and analyze an ascending plume as it rises above its source, in image data. It reads data recorded in various formats (video files, image files, or web-camera image streams), and at various wavelengths (infrared, visible, or ultra-violet). Using a set of filters which can be set interactively, the plume is first isolated from its background. A user-friendly interface then allows tracking of plume ascent and various parameters that characterize plume evolution during emission and ascent. These include records of plume height, velocity, acceleration, shape, volume, ash (fine-particle) loading, spreading rate, entrainment coefficient and inclination angle, as well as axial and radial profiles for radius and temperature (if data are radiometric). Image transformations (dilatation, rotation, resampling) can be performed to create new images with a vent-centered metric coordinate system. Applications may interest both plume observers (monitoring agencies) and modelers. For the first group, the software is capable of providing quantitative assessments of plume characteristics from image data, for post-event analysis or in near real-time analysis. For the second group, extracted data can serve as benchmarks for plume ascent models, and as inputs for cloud dispersal models. We here describe the software's tracking methodology and main graphical interfaces, using thermal infrared image data of an ascending volcanic ash plume at Santiaguito volcano.

  18. Fire analog: a comparison between fire plumes and energy center cooling tower plumes

    Energy Technology Data Exchange (ETDEWEB)

    Orgill, M.M.

    1977-10-01

    Thermal plumes or convection columns associated with large fires are compared to thermal plumes from cooling towers and proposed energy centers to evaluate the fire analog concept. Energy release rates of mass fires are generally larger than for single or small groups of cooling towers but are comparable to proposed large energy centers. However, significant physical differences exist between cooling tower plumes and fire plumes. Cooling tower plumes are generally dominated by ambient wind, stability and turbulence conditions. Fire plumes, depending on burning rates and other factors, can transform into convective columns which may cause the fire behavior to become more violent. This transformation can cause strong inflow winds and updrafts, turbulence and concentrated vortices. Intense convective columns may interact with ambient winds to create significant downwind effects such as wakes and Karman vortex streets. These characteristics have not been observed with cooling tower plumes to date. The differences in physical characteristics between cooling tower and fire plumes makes the fire analog concept very questionable even though the approximate energy requirements appear to be satisfied in case of large energy centers. Additional research is suggested in studying the upper-level plume characteristics of small experimental fires so this information can be correlated with similar data from cooling towers. Numerical simulation of fires and proposed multiple cooling tower systems could also provide comparative data.

  19. Near-glacier surveying of a subglacial discharge plume: Implications for plume parameterizations

    Science.gov (United States)

    Jackson, R. H.; Shroyer, E. L.; Nash, J. D.; Sutherland, D. A.; Carroll, D.; Fried, M. J.; Catania, G. A.; Bartholomaus, T. C.; Stearns, L. A.

    2017-07-01

    At tidewater glaciers, plume dynamics affect submarine melting, fjord circulation, and the mixing of meltwater. Models often rely on buoyant plume theory to parameterize plumes and submarine melting; however, these parameterizations are largely untested due to a dearth of near-glacier measurements. Here we present a high-resolution ocean survey by ship and remotely operated boat near the terminus of Kangerlussuup Sermia in west Greenland. These novel observations reveal the 3-D structure and transport of a near-surface plume, originating at a large undercut conduit in the glacier terminus, that is inconsistent with axisymmetric plume theory, the most common representation of plumes in ocean-glacier models. Instead, the observations suggest a wider upwelling plume—a "truncated" line plume of ˜200 m width—with higher entrainment and plume-driven melt compared to the typical axisymmetric representation. Our results highlight the importance of a subglacial outlet's geometry in controlling plume dynamics, with implications for parameterizing the exchange flow and submarine melt in glacial fjord models.

  20. STRATAFORM Plume Study: Analysis and Modeling

    Science.gov (United States)

    1999-09-30

    of settling is explained by the variation of plume speed, rather than by variations in settling velocity (Hill et al., submitted). Floculation is an...mouth. However, the fraction of floculated sediment does not vary as much as expected with changes in forcing conditions. There do appear to be large...differences in the floculation rate between the extreme flood conditions of 1997 and the more moderate floods of 1998. The detailed examination of plume

  1. Rocket plume tomography of combustion species

    OpenAIRE

    2001-01-01

    Interest in accurate detection and targeting of aggressor missiles has received considerable interest with the national priority of developing a missile defense system. Understanding the thermal signatures of the exhaust plumes of such missiles is key to accomplishing that mission. Before signature models can be precisely developed for specific rockets, the radiation of the molecular or combustion species within those plumes must be accurately predicted. A combination translation / rotation s...

  2. OPAD data analysis. [Optical Plumes Anomaly Detection

    Science.gov (United States)

    Buntine, Wray L.; Kraft, Richard; Whitaker, Kevin; Cooper, Anita E.; Powers, W. T.; Wallace, Tim L.

    1993-01-01

    Data obtained in the framework of an Optical Plume Anomaly Detection (OPAD) program intended to create a rocket engine health monitor based on spectrometric detections of anomalous atomic and molecular species in the exhaust plume are analyzed. The major results include techniques for handling data noise, methods for registration of spectra to wavelength, and a simple automatic process for estimating the metallic component of a spectrum.

  3. Vertical drainage capacity of new electrical drainage board on improvement of super soft clayey ground

    Institute of Scientific and Technical Information of China (English)

    沈扬; 励彦德; 黄文君; 徐海东; 胡品飞

    2015-01-01

    As an advanced polymer composites electro-kinetic geosynthetics, the electro-osmotic vertical drainage (EVD) board could drain water quickly and accelerate consolidation process. However, the drainage rate was mainly impacted by the vertical drainage capability. Therefore, vertical drainage capability at the top of EVD board was theoretically analyzed. Basic requirements for drainage at the top of the board were summed up, as well as the formula of anode pore pressure when losing the vertical drainage capability. Meanwhile, a contrast test on the top and bottom drainage capacities was conducted. In use of the advanced EVD board, the voltage potential and pore pressure of anode were measured. Moreover, the derived formulas were verified. The result shows that the decrease of electric force gradient had an observable impact on the drainage capability. There was nearly no difference between the energy consumption for the two drainage methods. Although a little less water was discharged, the top drainage method had more advantages, such as high initial drainage velocity, few soil cracks, low anode water content and high soil strength. All of these show that the super soft soil ground could be consolidated quickly in use of the advanced EVD board through the top drainage. The top drainage method could efficiently improve the drainage effect, decrease the energy consumption and speed up the project proceeding.

  4. Cretaceous Arctic magmatism: Slab vs. plume? Or slab and plume?

    Science.gov (United States)

    Gottlieb, E. S.; Miller, E. L.; Andronikov, A. V.; Brumley, K.; Mayer, L. A.; Mukasa, S. B.

    2010-12-01

    Tectonic models for the Cretaceous paleogeographic evolution of the Arctic Ocean and its adjacent landmasses propose that rifting in the Amerasia Basin (AB) began in Jura-Cretaceous time, accompanied by the development of the High Arctic Large Igneous Province (HALIP). During the same timespan, deformation and slab-related magmatism, followed by intra-arc rifting, took place along the Pacific side of what was to become the Arctic Ocean. A compilation and comparison of the ages, characteristics and space-time variation of circum-Arctic magmatism allows for a better understanding of the role of Pacific margin versus Arctic-Atlantic plate tectonics and the role of plume-related magmatism in the origin of the Arctic Ocean. In Jura-Cretaceous time, an arc built upon older terranes overthrust the Arctic continental margins of North America and Eurasia, shedding debris into foreland basins in the Brooks Range, Alaska, across Chukotka, Russia, to the Lena Delta and New Siberian Islands region of the Russian Arctic. These syn-tectonic sediments have some common sources (e.g., ~250-300 Ma magmatic rocks) as determined by U-Pb detrital zircon geochronology. They are as young as Valanginian-Berriasian (~136 Ma, Gradstein et al., 2004) and place a lower limit on the age of formation of the AB. Subsequent intrusions of granitoid plutons, inferred to be ultimately slab-retreat related, form a belt along the far eastern Russian Arctic continental margin onto Seward Peninsula and have yielded a continuous succession of zircon U-Pb ages from ~137-95 Ma (n=28) and a younger suite ~91-82 Ma (n=16). All plutons dated were intruded in an extensional tectonic setting based on their relations to wall-rock deformation. Regional distribution of ages shows a southward migration of the locus of magmatism during Cretaceous time. Basaltic lavas as old as 130 Ma and as young as 80 Ma (40Ar/39Ar)) erupted across the Canadian Arctic Islands, Svalbard and Franz Josef Land and are associated with

  5. Drainage area data for Alabama streams

    Science.gov (United States)

    Stallings, J.S.; Peirce, L.B.

    1957-01-01

    The drainage area of a river basin is an important parameter in many engineering equations used for hydrologic design. It is not a parameter, however, that always requires precise measurement. Factors in the hydrologic cycle such as rainfall, runoff, transpiration, and infiltration cannot be measured nearly as closely as drainage area. Largely for this reason, drainage areas are often measured to varying degrees of precision depending upon the immediate need, with little thought to some other use or some other user of the figure obtained. It can readily be appreciated that this practice, continued for long by many different agencies, will result in a heterogeneous collection of drainage area figures, often discordant and of an accuracy unknown to any but those who computed them. Figures of drainage area published by various Federal agencies are frequently discrepant or contradictory, giving rise to confusion in the use of drainage area data. Seeking to better this situation, the Federal Inter-Agency River Basin Committee (FIARBC) in November 1951 published its Bulletin No. 4, Inter-Agency Coordination of Drainage Area Data. That Bulletin recommended procedures to be followed by the interested Federal agencies “for coordinating drainage area data in the interest of promoting uniformity, reducing confusion and contradiction of published figures, and improving the ready availability of drainage area data pertaining to drainage basins of the United States and its possessions.”

  6. A global sensitivity analysis of the PlumeRise model of volcanic plumes

    Science.gov (United States)

    Woodhouse, Mark J.; Hogg, Andrew J.; Phillips, Jeremy C.

    2016-10-01

    Integral models of volcanic plumes allow predictions of plume dynamics to be made and the rapid estimation of volcanic source conditions from observations of the plume height by model inversion. Here we introduce PlumeRise, an integral model of volcanic plumes that incorporates a description of the state of the atmosphere, includes the effects of wind and the phase change of water, and has been developed as a freely available web-based tool. The model can be used to estimate the height of a volcanic plume when the source conditions are specified, or to infer the strength of the source from an observed plume height through a model inversion. The predictions of the volcanic plume dynamics produced by the model are analysed in four case studies in which the atmospheric conditions and the strength of the source are varied. A global sensitivity analysis of the model to a selection of model inputs is performed and the results are analysed using parallel coordinate plots for visualisation and variance-based sensitivity indices to quantify the sensitivity of model outputs. We find that if the atmospheric conditions do not vary widely then there is a small set of model inputs that strongly influence the model predictions. When estimating the height of the plume, the source mass flux has a controlling influence on the model prediction, while variations in the plume height strongly effect the inferred value of the source mass flux when performing inversion studies. The values taken for the entrainment coefficients have a particularly important effect on the quantitative predictions. The dependencies of the model outputs to variations in the inputs are discussed and compared to simple algebraic expressions that relate source conditions to the height of the plume.

  7. Sulfur chemistry in a copper smelter plume

    Science.gov (United States)

    Eatough, D. J.; Christensen, J. J.; Eatough, N. I.; Hill, M. W.; Major, T. D.; Mangelson, N. F.; Post, M. E.; Ryder, J. F.; Hansen, L. D.; Meisenheimer, R. G.; Fischer, J. W.

    Sulfur transformation chemistry was studied in the plume of the Utah smelter of Kennecott Copper Corporation from April to October 1977. Samples were taken at up to four locations from 4 to 60 km from the stacks. Data collected at each station included: SO 2 concentration, low-volume collected total paniculate matter, high-volume collected size fractionated paniculate matter, wind velocity and direction, temperature, and relative humidity. Paniculate samples were analyzed for S(IV). sulfate, strong acid, anions, cations, and elemental concentrations using calorimetric, ion Chromatographie, FIXE, ESCA, ion microprobe, and SEM-ion microprobe techniques. The concentration of As in the paniculate matter was used as a conservative plume tracer. The ratios Mo/As, Pb/As, and Zn/As were constant in particulate matter collected at all sampling sites for any particle size. Strong mineral acid was neutralized by background metal oxide and/or carbonate particulates within 40km of the smelter. This neutralization process is limited only by the rate of incorporation of basic material into the plume. Two distinct metal-S(IV) species similar to those observed in laboratory aerosol experiments were found in the plume. The formation of paniculate S(IV) species occurs by interaction of SO 2 (g) with both ambient and plume derived aerosol and is equilibrium controlled. The extent of formation of S(IV) complexes in the aerosol is directly proportional to the SO 2(g) and paniculate (Cu + Fe) concentration and inversely proportional to the paniculate acidity. S(IV) species were stable in collected paniculate matter only in the neutralized material, but with proper sampling techniques could be demonstrated to also be present in very acidic particles at high ambient SO 2(g) concentrations. Reduction of arsenate to arsenite by the aerosol S(IV) complexes during plume transport is suggested. The SO 2(g)-sulfate conversion process in the plume is described by a mechanism which is first order

  8. Mine Drainage Generation and Control Options.

    Science.gov (United States)

    Wei, Xinchao; Rodak, Carolyn M; Zhang, Shicheng; Han, Yuexin; Wolfe, F Andrew

    2016-10-01

    This review provides a snapshot of papers published in 2015 relevant to the topic of mine drainage generation and control options. The review is broken into 3 sections: Generation, Prediction and Prevention, and Treatment Options. The first section, mine drainage generation, focuses on the characterization of mine drainage and the environmental impacts. As such, it is broken into three subsections focused on microbiological characterization, physiochemical characterization, and environmental impacts. The second section of the review is divided into two subsections focused on either the prediction or prevention of acid mine drainage. The final section focuses on treatment options for mine drainage and waste sludge. The third section contains subsections on passive treatment, biological treatment, physiochemical treatment, and a new subsection on beneficial uses for mine drainage and treatment wastes.

  9. Microbial populations in contaminant plumes

    Science.gov (United States)

    Haack, Sheridan K.; Bekins, Barbara A.

    Efficient biodegradation of subsurface contaminants requires two elements: (1) microbial populations with the necessary degradative capabilities, and (2) favorable subsurface geochemical and hydrological conditions. Practical constraints on experimental design and interpretation in both the hydrogeological and microbiological sciences have resulted in limited knowledge of the interaction between hydrogeological and microbiological features of subsurface environments. These practical constraints include: (1) inconsistencies between the scales of investigation in the hydrogeological and microbiological sciences, and (2) practical limitations on the ability to accurately define microbial populations in environmental samples. However, advances in application of small-scale sampling methods and interdisciplinary approaches to site investigations are beginning to significantly improve understanding of hydrogeological and microbiological interactions. Likewise, culture-based and molecular analyses of microbial populations in subsurface contaminant plumes have revealed significant adaptation of microbial populations to plume environmental conditions. Results of recent studies suggest that variability in subsurface geochemical and hydrological conditions significantly influences subsurface microbial-community structure. Combined investigations of site conditions and microbial-community structure provide the knowledge needed to understand interactions between subsurface microbial populations, plume geochemistry, and contaminant biodegradation. La biodégradation efficace des polluants souterrains requiert deux éléments: des populations microbiennes possédant les aptitudes nécessaires à la dégradation, et des conditions géochimiques et hydrologiques souterraines favorables. Des contraintes pratiques sur la conception et l'interprétation des expériences à la fois en microbiologie et en hydrogéologie ont conduit à une connaissance limitée des interactions entre les

  10. [Simple cholecystectomy without drainage. A dilemma?].

    Science.gov (United States)

    Macellari, G; Baraldi, U; Giustina, A; David, P; Parigi, M; De Angelis, E

    1980-04-30

    A retrospective study was carried out to show the uselessness of the routine employment of the drainage after simple cholecystectomy. 1425 patients underwent cholecystectomy because for cholelithiasis; of these 164 (13%) were drained because of adhesions, concomitant pancreatitis, inadvertent damage, empiema, gangrena and perforation of the gallbladder. In no case of the 1261 patients without drainage it has been possible to demonstrate the presence of one of those complications for which the use of a drainage after simple cholecystectomy is commonly advised.

  11. PlumeSat: A Micro-Satellite Based Plume Imagery Collection Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ledebuhr, A.G.; Ng, L.C.

    2002-06-30

    This paper describes a technical approach to cost-effectively collect plume imagery of boosting targets using a novel micro-satellite based platform operating in low earth orbit (LEO). The plume collection Micro-satellite or PlueSat for short, will be capable of carrying an array of multi-spectral (UV through LWIR) passive and active (Imaging LADAR) sensors and maneuvering with a lateral divert propulsion system to different observation altitudes (100 to 300 km) and different closing geometries to achieve a range of aspect angles (15 to 60 degrees) in order to simulate a variety of boost phase intercept missions. The PlumeSat will be a cost effective platform to collect boost phase plume imagery from within 1 to 10 km ranges, resulting in 0.1 to 1 meter resolution imagery of a variety of potential target missiles with a goal of demonstrating reliable plume-to-hardbody handover algorithms for future boost phase intercept missions. Once deployed on orbit, the PlumeSat would perform a series phenomenology collection experiments until expends its on-board propellants. The baseline PlumeSat concept is sized to provide from 5 to 7 separate fly by data collects of boosting targets. The total number of data collects will depend on the orbital basing altitude and the accuracy in delivering the boosting target vehicle to the nominal PlumeSat fly-by volume.

  12. Coronal Plumes in the Fast Solar Wind

    Science.gov (United States)

    Velli, Marco; Lionello, Roberto; Linker, Jon A.; Mikic, Zoran

    2011-01-01

    The expansion of a coronal hole filled with a discrete number of higher density coronal plumes is simulated using a time-dependent two-dimensional code. A solar wind model including an exponential coronal heating function and a flux of Alfven waves propagating both inside and outside the structures is taken as a basic state. Different plasma plume profiles are obtained by using different scale heights for the heating rates. Remote sensing and solar wind in situ observations are used to constrain the parameter range of the study. Time dependence due to plume ignition and disappearance is also discussed. Velocity differences of the order of approximately 50 km/s, such as those found in microstreams in the high-speed solar wind, may be easily explained by slightly different heat deposition profiles in different plumes. Statistical pressure balance in the fast wind data may be masked by the large variety of body and surface waves which the higher density filaments may carry, so the absence of pressure balance in the microstreams should not rule out their interpretation as the extension of coronal plumes into interplanetary space. Mixing of plume-interplume material via the Kelvin-Helmholtz instability seems to be possible within the parameter ranges of the models defined here, only at large di stances from the Sun, beyond 0.2-0.3 AU. Plasma and composition measurements in the inner heliosphere, such as those which will become available with Solar Orbiter and Solar Probe Plus, should therefore definitely be able to identify plume remnants in the solar wind.

  13. Drainage basin delineations for selected USGS streamflow-gaging stations in Virginia (Drainage_Basin)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Drainage_Basin polygon feature class was created as a digital representation of drainage basins for more than 1,650 continuous-record streamflow-gaging stations,...

  14. Topside-plasmasphere electron density profiles model by using AIS ionosonde measurements and calibrates GPS TEC data

    Science.gov (United States)

    Cesaroni, Claudio; Scotto, Carlo; Ippolito, Alessandro; Ciraolo, Luigi

    2013-04-01

    The Upper Atmosphere Physics group at INGV (Istituto Nazionale di Geofisica e Vulcanologia) developed Autoscala, a computer program for automatic scaling of the critical frequency foF2 and other ionospheric parameters derived from ionograms. Autoscala includes a routine that automatically estimates the electron density profile below F layer peak height hmF2, by adjusting the parameters of a model according to the recorded ionogram [Scotto (2009)]. By integrating this profile we can estimate bottom-side total electron content (bTEC). By means of a calibration technique [Ciraolo et al. (2007)], we are able to obtain calibrated vertical TEC (vTEC) values from GPS measurements over a receiver station. This method permits to estimate biases of the received signal due to transmitter-receiver hardware configuration. These biases must be eliminated from the GPS data in order to calibrate the experimental slant total electron content (sTEC) along the satellite-receiver line-of-sight (LoS). The difference between vTEC and bottom-side TEC (bTEC) permits to evaluate electron content of the topside ionospheric region (tTEC). Starting from tTEC, bottom-side parameters (foF2, hmF2, scale height at hmF2) obtained by ionosonde and O+ - H+ transition level, we can solve a system of equations based on different ionospheric profiler (Chapman, sech-squared and exponential) the solution of which provides ion scale height [Stankov et al. (2003)]. This last factor is sufficient to establish the vertical distribution of electrons in topside and plasmasphere regions. Obtained vertical profiles could be used to develop a new model for real time estimation of TEC and topside electron density distribution. References: Scotto, C. (2009). Electron density profile calculation technique for Autoscala ionogram analysis. Advances in Space Research, 44(6), 756-766. doi:10.1016/j.asr.2009.04.037 Ciraolo, L., et al. "Calibration errors on experimental slant total electron content (TEC) determined with

  15. Wind-Forced Baroclinic Beta-Plumes

    Science.gov (United States)

    Belmadani, A.; Maximenko, N. A.; Melnichenko, O.; Schneider, N.; Di Lorenzo, E.

    2011-12-01

    A planetary beta-plume is a classical example of oceanic circulation induced by a localized vorticity source or sink that allows an analytical description in simplistic cases. Its barotropic structure is a zonally-elongated, gyre-like cell governed by the Sverdrup circulation on the beta-plane. The dominant zonal currents, found west of the source/sink, are often referred to as zonal jets. This simple picture describes the depth-integrated flow. Previous studies have investigated beta-plumes in a reduced-gravity framework or using other simple models with a small number of vertical layers, thereby lacking representation of the vertical structure. In addition, most previous studies use a purely linear regime without considering the role of eddies. However, these jets are often associated with strong lateral shear that makes them unstable under increased forcing. The circulation in such a nonlinear regime may involve eddy-mean flow interactions, which modify the time-averaged circulation. Here, the baroclinic structures of linear and nonlinear wind-forced beta-plumes are studied using a continuously-stratified, primitive equation, eddy-permitting ocean model (ROMS). The model is configured in an idealized rectangular domain for the subtropical ocean with a flat bottom. The surface wind forcing is a steady anticyclonic Gaussian wind vortex, which provides a localized vorticity source in the center of the domain. The associated wind stress curl and Ekman pumping comprise downwelling in the vortex center surrounded by a ring of weaker upwelling. Under weak forcing, the simulated steady-state circulation corresponds well with a theoretical linear beta-plume. While its depth-integrated transport exhibits a set of zonal jets, consistent with Sverdrup theory, the baroclinic structure of the plume is remarkably complex. Relatively fast westward decay of the surface currents occurs simultaneously with the deepening of the lower boundary of the plume. This deepening suggests

  16. Confirmation of Water Plumes on Europa

    Science.gov (United States)

    Sparks, William

    Evidence was found for plumes of water ice venting from the polar regions of Europa (Roth et al 2014a) - FUV detection of off-limb line emission from the dissociation products of water. We find additional evidence for the presence of ice plumes on Europa from HST transit imaging observations (Sparks et al 2016). The evidence for plumes remains marginal, 4-sigma, and there is considerable debate as to their reality. SOFIA can potentially resolve this issue with an unambiguous direct detection of water vapor using EXES. Detection of the fundamental vibrational mode of water vapor at 6 micron, as opposed to the atomic constituents of water, would prove that the plumes exist and inform us of their physical chemistry through quantitative consideration of the balance between water vapor and its dissociation products, hydrogen and oxygen. We propose to obtain spectra of the leading and trailing hemispheres separately, with trailing as the higher priority. These provide two very different physical environments and plausibly different degrees of activity. If the plumes of Europa arise from the deep ocean, we have gained access to probably the most astrobiologically interesting location in the Solar System, and clarify an issue of major strategic importance in NASAs planning for its multi-billion dollar mission to Europa.

  17. Modelling of aerosol processes in plumes

    Energy Technology Data Exchange (ETDEWEB)

    Lazaridis, M.; Isukapalli, S.S.; Georgopoulos, P.G. [Norwegian Institute of Air Research, Kjeller (Norway)

    2001-07-01

    A modelling platform for studying photochemical gaseous and aerosol phase processes from localized (e.g., point) sources has been presented. The current approach employs a reactive plume model which extends the regulatory model RPM-IV by incorporating aerosol processes and heterogeneous chemistry. The physics and chemistry of elemental carbon, organic carbon, sulfate, nitrate, ammonium material of aerosols are treated and attributed to the PM size distribution. A modified version of the carbon bond IV chemical mechanism is included to model the formation of organic aerosol. Aerosol dynamics modeled include mechanisms of nucleation, condensation, dry deposition and gas/particle partitioning of organic matter. The model is first applied to a number of case studies involving emissions from point sources and sulfate particle formation in plumes. Model calculations show that homogeneous nucleation is an efficient process for new particle formation in plumes, in agreement with previous field studies and theoretical predictions. In addition, the model is compared with field data from power plant plumes with satisfactory predictions against gaseous species and total sulphate mass measurements. Finally, the plume model is applied to study secondary organic matter formation due to various emission categories such as vehicles and the oil production sector.

  18. Intermittent heat instabilities in an air plume

    Science.gov (United States)

    Le Mouël, Jean-Louis; Kossobokov, Vladimir G.; Perrier, Frederic; Morat, Pierre

    2016-08-01

    We report the results of heating experiments carried out in an abandoned limestone quarry close to Paris, in an isolated room of a volume of about 400 m3. A heat source made of a metallic resistor of power 100 W was installed on the floor of the room, at distance from the walls. High-quality temperature sensors, with a response time of 20 s, were fixed on a 2 m long bar. In a series of 24 h heating experiments the bar had been set up horizontally at different heights or vertically along the axis of the plume to record changes in temperature distribution with a sampling time varying from 20 to 120 s. When taken in averages over 24 h, the temperatures present the classical shape of steady-state plumes, as described by classical models. On the contrary, the temperature time series show a rich dynamic plume flow with intermittent trains of oscillations, spatially coherent, of large amplitude and a period around 400 s, separated by intervals of relative quiescence whose duration can reach several hours. To our knowledge, no specific theory is available to explain this behavior, which appears to be a chaotic interaction between a turbulent plume and a stratified environment. The observed behavior, with first-order factorization of a smooth spatial function with a global temporal intermittent function, could be a universal feature of some turbulent plumes in geophysical environments.

  19. Near field characteristics of buoyant helium plumes

    Indian Academy of Sciences (India)

    Kuchimanchi K Bharadwaj; Debopam Das; Pavan K Sharma

    2015-05-01

    Puffing and entrainment characteristics of helium plumes emanating out into ambient air from a circular orifice are investigated in the present study. Velocity and density fields are measured across a diametric plane using Particle Image Velocimetry (PIV) and Planar Laser Induced Fluorescence (PLIF) respectively in phase resolved manner. Experiments are performed in Froude numbers range 0.2–0.4 and for Reynolds numbers 58–248. Puffing frequency measurements reveal that the plume puffing frequencies are insensitive to the plume exit conditions, since the instability is buoyancy driven. The frequencies obtained in the present case are in agreement with frequencies obtained by Cetegen & Kasper (1996) for plumes originating from circular nozzles of various L/D ratios. Velocity and density measurements reveal that toroidal vortex formed during a puffing cycle entrains ambient air as it traverses downstream and this periodic engulfment governs the entrainment mechanism in pulsating plumes. The obtained velocity and density fields are used to calculate mass entrainment rates. It is revealed that though the flow is unsteady, the contribution of unsteady term in mass conservation to entrainment is negligible, and it becomes zero over a puff cycle. Finally, an empirical relation for variation of mass entrainment with height has been proposed, in which the non-dimensional mass entrainment is found to follow a power law with the non-dimensional height.

  20. Mantle plumes in the vicinity of subduction zones

    Science.gov (United States)

    Mériaux, C. A.; Mériaux, A.-S.; Schellart, W. P.; Duarte, J. C.; Duarte, S. S.; Chen, Z.

    2016-11-01

    We present three-dimensional deep-mantle laboratory models of a compositional plume within the vicinity of a buoyancy-driven subducting plate with a fixed trailing edge. We modelled front plumes (in the mantle wedge), rear plumes (beneath the subducting plate) and side plumes with slab/plume systems of buoyancy flux ratio spanning a range from 2 to 100 that overlaps the ratios in nature of 0.2-100. This study shows that 1) rising side and front plumes can be dragged over thousands of kilometres into the mantle wedge, 2) flattening of rear plumes in the trench-normal direction can be initiated 700 km away from the trench, and a plume material layer of lesser density and viscosity can ultimately almost entirely underlay a retreating slab after slab/plume impact, 3) while side and rear plumes are not tilted until they reach ∼600 km depth, front plumes can be tilted at increasing depths as their plume buoyancy is lessened, and rise at a slower rate when subjected to a slab-induced downwelling, 4) rear plumes whose buoyancy flux is close to that of a slab, can retard subduction until the slab is 600 km long, and 5) slab-plume interaction can lead to a diversity of spatial plume material distributions into the mantle wedge. We discuss natural slab/plume systems of the Cascadia/Bowie-Cobb, and Nazca/San Felix-Juan Fernandez systems on the basis of our experiments and each geodynamic context and assess the influence of slab downwelling at depths for the starting plumes of Java, Coral Sea and East Solomon. Overall, this study shows how slab/plume interactions can result in a variety of geological, geophysical and geochemical signatures.

  1. Subsurface drainage volume reduction with drainage water management: Case studies in Ohio, USA

    Science.gov (United States)

    One of the main contributors to poor water quality in the Mississippi River and aeral increase in the hypoxic zone in the Gulf of Mexico is intensive drainage of the cropland within the watershed. Controlled drainage has been demonstrated as an approach to curb totla drainage outflow and nutrient di...

  2. Simple model of a cooling tower plume

    Science.gov (United States)

    Jan, Cizek; Jiri, Nozicka

    2016-06-01

    This article discusses the possibilities in the area of modeling of the so called cooling tower plume emergent at operating evaporating cooling systems. As opposed to recent publication, this text focuses on the possibilities of a simplified analytic description of the whole problem where this description shall - in the future - form the base of a calculation algorithms enabling to simulate the efficiency of systems reducing this cooling tower plume. The procedure is based on the application of basic formula for the calculation of the velocity and concentration fields in the area above the cooling tower. These calculation is then used to determine the form and the total volume of the plume. Although this approach does not offer more exact results, it can provide a basic understanding of the impact of individual quantities relating to this problem.

  3. A collisionless plasma thruster plume expansion model

    Science.gov (United States)

    Merino, Mario; Cichocki, Filippo; Ahedo, Eduardo

    2015-06-01

    A two-fluid model of the unmagnetized, collisionless far region expansion of the plasma plume for gridded ion thrusters and Hall effect thrusters is presented. The model is integrated into two semi-analytical solutions valid in the hypersonic case. These solutions are discussed and compared against the results from the (exact) method of characteristics; the relative errors in density and velocity increase slowly axially and radially and are of the order of 10-2-10-3 in the cases studied. The plasma density, ion flux and ambipolar electric field are investigated. A sensitivity analysis of the problem parameters and initial conditions is carried out in order to characterize the far plume divergence angle in the range of interest for space electric propulsion. A qualitative discussion of the physics of the secondary plasma plume is also provided.

  4. Numerical and approximate solutions for plume rise

    Science.gov (United States)

    Krishnamurthy, Ramesh; Gordon Hall, J.

    Numerical and approximate analytical solutions are compared for turbulent plume rise in a crosswind. The numerical solutions were calculated using the plume rise model of Hoult, Fay and Forney (1969, J. Air Pollut. Control Ass.19, 585-590), over a wide range of pertinent parameters. Some wind shear and elevated inversion effects are included. The numerical solutions are seen to agree with the approximate solutions over a fairly wide range of the parameters. For the conditions considered in the study, wind shear effects are seen to be quite small. A limited study was made of the penetration of elevated inversions by plumes. The results indicate the adequacy of a simple criterion proposed by Briggs (1969, AEC Critical Review Series, USAEC Division of Technical Information extension, Oak Ridge, Tennesse).

  5. Properties of industrial dense gas plumes

    Science.gov (United States)

    Shaver, E. M.; Forney, L. J.

    Hazardous gases and vapors are often discharged into the atmosphere from industrial plants during catastrophic events (e.g. Union Carbide incident in Bhopal, India). In many cases the discharged components are more dense than air and settle to the ground surface downstream from the stack exit. In the present paper, the buoyant plume model of Hoult, Fay and Forney (1969, J. Air Pollut. Control Ass. 19, 585-590.) has been altered to predict the properties of hazardous discharges. In particular, the plume impingement point, radius and concentration are predicted for typical stack exit conditions, wind speeds and temperature profiles. Asymptotic expressions for plume properties at the impingement point are also derived for a constant crosswind and neutral temperature profile. These formulae are shown to be useful for all conditions.

  6. Modeling the Enceladus plume--plasma interaction

    CERN Document Server

    Fleshman, B L; Bagenal, F

    2010-01-01

    We investigate the chemical interaction between Saturn's corotating plasma and Enceladus' volcanic plumes. We evolve plasma as it passes through a prescribed H2O plume using a physical chemistry model adapted for water-group reactions. The flow field is assumed to be that of a plasma around an electrically-conducting obstacle centered on Enceladus and aligned with Saturn's magnetic field, consistent with Cassini magnetometer data. We explore the effects on the physical chemistry due to: (1) a small population of hot electrons; (2) a plasma flow decelerated in response to the pickup of fresh ions; (3) the source rate of neutral H2O. The model confirms that charge exchange dominates the local chemistry and that H3O+ dominates the water-group composition downstream of the Enceladus plumes. We also find that the amount of fresh pickup ions depends heavily on both the neutral source strength and on the presence of a persistent population of hot electrons.

  7. The CuSPED Mission: CubeSat for GNSS Sounding of the Ionosphere-Plasmasphere Electron Density

    Science.gov (United States)

    Gross, Jason N.; Keesee, Amy M.; Christian, John A.; Gu, Yu; Scime, Earl; Komjathy, Attila; Lightsey, E. Glenn; Pollock, Craig J.

    2016-01-01

    The CubeSat for GNSS Sounding of Ionosphere-Plasmasphere Electron Density (CuSPED) is a 3U CubeSat mission concept that has been developed in response to the NASA Heliophysics program's decadal science goal of the determining of the dynamics and coupling of the Earth's magnetosphere, ionosphere, and atmosphere and their response to solar and terrestrial inputs. The mission was formulated through a collaboration between West Virginia University, Georgia Tech, NASA GSFC and NASA JPL, and features a 3U CubeSat that hosts both a miniaturized space capable Global Navigation Satellite System (GNSS) receiver for topside atmospheric sounding, along with a Thermal Electron Capped Hemispherical Spectrometer (TECHS) for the purpose of in situ electron precipitation measurements. These two complimentary measurement techniques will provide data for the purpose of constraining ionosphere-magnetosphere coupling models and will also enable studies of the local plasma environment and spacecraft charging; a phenomenon which is known to lead to significant errors in the measurement of low-energy, charged species from instruments aboard spacecraft traversing the ionosphere. This paper will provide an overview of the concept including its science motivation and implementation.

  8. Effects of meteorological conditions on spore plumes

    Science.gov (United States)

    Burch, M.; Levetin, E.

    2002-05-01

    Fungal spores are an ever-present component of the atmosphere, and have long been known to trigger asthma and hay fever symptoms in sensitive individuals. The atmosphere around Tulsa has been monitored for airborne spores and pollen with Burkard spore traps at several sampling stations. This study involved the examination of the hourly spore concentrations on days that had average daily concentrations near 50,000 spores/m3 or greater. Hourly concentrations of Cladosporium, Alternaria, Epicoccum, Curvularia, Pithomyces, Drechslera, smut spores, ascospores, basidiospores, other, and total spores were determined on 4 days at three sites and then correlated with hourly meteorological data including temperature, rainfall, wind speed, dew point, air pressure, and wind direction. On each of these days there was a spore plume, a phenomenon in which spore concentrations increased dramatically over a very short period of time. Spore plumes generally occurred near midday, and concentrations were seen to increase from lows around 20,000 total spores/m3 to highs over 170,000 total spores/m3 in 2 h. Multiple regression analysis of the data indicated that increases in temperature, dew point, and air pressure correlated with the increase in spore concentrations, but no single weather variable predicted the appearance of a spore plume. The proper combination of changes in these meteorological parameters that result in a spore plume may be due to the changing weather conditions associated with thunderstorms, as on 3 of the 4 days when spore plumes occurred there were thunderstorms later that evening. The occurrence of spore plumes may have clinical significance, because other studies have shown that sensitization to certain spore types can occur during exposure to high spore concentrations.

  9. Cassini Radio Occultation by Enceladus Plume

    Science.gov (United States)

    Kliore, A.; Armstrong, J.; Flasar, F.; French, R.; Marouf, E.; Nagy, A.; Rappaport, N.; McGhee, C.; Schinder, P.; Anabtawi, A.; Asmar, S.; Barbinis, E.; Fleischman, D.; Goltz, G.; Aguilar, R.; Rochblatt, D.

    2006-12-01

    A fortuitous Cassini radio occultation by Enceladus plume occurs on September 15, 2006. The occultation track (the spacecraft trajectory in the plane of the sky as viewed from the Earth) has been designed to pass behind the plume (to pass above the south polar region of Enceladus) in a roughly symmetrical geometry centered on a minimum altitude above the surface of about 20 km. The minimum altitude was selected primarily to ensure probing much of the plume with good confidence given the uncertainty in the spacecraft trajectory. Three nearly-pure sinusoidal signals of 0.94, 3.6, and 13 cm-wavelength (Ka-, X-, and S-band, respectively) are simultaneously transmitted from Cassini and are monitored at two 34-m Earth receiving stations of the Deep Space Network (DSN) in Madrid, Spain (DSS-55 and DSS-65). The occultation of the visible plume is extremely fast, lasting less than about two minutes. The actual observation time extends over a much longer time interval, however, to provide a good reference baseline for potential detection of signal perturbations introduced by the tenuous neutral and ionized plume environment. Given the likely very small fraction of optical depth due to neutral particles of sizes larger than about 1 mm, detectable changes in signal intensity is perhaps unlikely. Detection of plume plasma along the radio path as perturbations in the signals frequency/phase is more likely and the magnitude will depend on the electron columnar density probed. The occultation time occurs not far from solar conjunction time (Sun-Earth-probe angle of about 33 degrees), causing phase scintillations due to the solar wind to be the primary limiting noise source. We estimate a delectability limit of about 1 to 3E16 electrons per square meter columnar density assuming about 100 seconds integration time. Potential measurement of the profile of electron columnar density along the occultation track is an exciting prospect at this time.

  10. 24 CFR 3285.604 - Drainage system.

    Science.gov (United States)

    2010-04-01

    ... § 3285.604 Drainage system. (a) Crossovers. Multi-section homes with plumbing in more than one section require drainage system crossover connections to join all sections of the home. The crossover design requirements are located in, and must be designed in accordance with, § 3280.610 of this chapter. (b)...

  11. Agricultural drainage: Towards an integrated approach

    NARCIS (Netherlands)

    Abdeldayem, S.; Hoevenaars, J.; Mollinga, P.P.; Scheuman, W.; Slootweg, R.; Steenbergen, van F.

    2005-01-01

    Drainage needs to reclaim its rightful position as an indispensable element in the integrated management of land and water. An integrated approach to drainage can be developed by means of systematic mapping of the functions of natural resources systems (goods and services) and the values attributed

  12. Plume head - trench interaction: impact on subduction dynamics

    Science.gov (United States)

    Betts, P. G.; Moresi, L. N.; Mason, W. G.; Willis, D.

    2013-12-01

    The geologic record provides numerous examples where plumes and their associated buoyancy swell have disrupted convergent plate margins. These interactions have produced a variety of responses in the overriding plate including transient episodes of arc amagmatism, transient episodes of crustal shortening followed by plume-related magmatism in the overriding plate. The latter observation implies the plume must have transitioned from the subducting plate to the overriding plate. We present several 3D Underworld numerical models of plume heads of variable dimension and buoyancy interacting with a subduction trench. The models indicate that plume heads impact enormously on trench geometry. Arcuate trenches are created as the trench retreats around the edges of the plume head, whereas trench advance occurs in front of the plume resulting in transient crustal shortening in the overriding plate. Stalling of subduction when the plume head impacts the trench causes slab windowing. The size of the slab window is dependent on the size and buoyancy of the plume. The creation of the slab window provides a potential conduit for plume migration to the overriding plate. Alternatively, the plume head may be transferred to the overriding plate as subduction is re-established behind the plume. Models with "strong" slabs, characterized by high yield strengths, display different behavior. Plume-heads are entrained in the slab and are subducted without the development of a slab window.

  13. EUV Sunspot Plumes Observed with SOHO

    CERN Document Server

    Maltby, P; Brekke, P; Haugan, S V H; Kjeldseth-Moe, O; Wikstøl, O; Rimmele, T R; Wikstøl, O

    1998-01-01

    Bright EUV sunspot plumes have been observed in five out of nine sunspot regions with the Coronal Diagnostic Spectrometer -- CDS on SOHO. In the other four regions the brightest line emissions may appear inside the sunspot but are mainly concentrated in small regions outside the sunspot areas. These results are in contrast to those obtained during the Solar Maximum Mission, but are compatible with the Skylab mission results. The present observations show that sunspot plumes are formed in the upper part of the transition region, occur both in magnetic unipolar-- and bipolar regions, and may extend from the umbra into the penumbra.

  14. Halogen Chemistry in Volcanic Plumes (Invited)

    Science.gov (United States)

    Roberts, Tjarda

    2017-04-01

    Volcanoes release vast amounts of gases and particles in the atmosphere. Volcanic halogens (HF, HCl, HBr, HI) are co-emitted alongside SO2, and observations show rapid formation of BrO and OClO in the plume as it disperses into the troposphere. The development of 1D and Box models (e.g. PlumeChem) that simulate volcanic plume halogen chemistry aims to characterise how volcanic reactive halogens form and quantify their atmospheric impacts. Following recent advances, these models can broadly reproduce the observed downwind BrO/SO2 ratios using "bromine-explosion" chemistry schemes, provided they use a "high-temperature initialisation" to inject radicals (OH, Cl, Br and possibly NOx) which "kick-start" the low-temperature chemistry cycles that convert HBr into reactive bromine (initially as Br2). The modelled rise in BrO/SO2 and subsequent plateau/decline as the plume disperses downwind reflects cycling between reactive bromine, particularly Br-BrO, and BrO-HOBr-BrONO2. BrCl is produced when aerosol becomes HBr-depleted. Recent model simulations suggest this mechanism for reactive chlorine formation can broadly account for OClO/SO2 reported at Mt Etna. Predicted impacts of volcanic reactive halogen chemistry include the formation of HNO3 from NOx and depletion of ozone. This concurs with HNO3 widely reported in volcanic plumes (although the source of NOx remains under question), as well as observations of ozone depletion reported in plumes from several volcanoes (Mt Redoubt, Mt Etna, Eyjafjallajokull). The plume chemistry can transform mercury into more easily deposited and potentially toxic forms, for which observations are limited. Recent incorporation of volcanic halogen chemistry in a 3D regional model of degassing from Ambrym (Vanuatu) also predicts how halogen chemistry causes depletion of OH to lengthen the SO2 lifetime, and highlights the potential for halogen transport from the troposphere to the stratosphere. However, the model parameter-space is vast and

  15. Endoscopic ultrasound-guided drainage of pancreatic pseudocysts

    DEFF Research Database (Denmark)

    Saftoiu, Adrian; Vilmann, Andreas; Vilmann, Peter

    2015-01-01

    Pancreatic pseudocysts are fluid collections in the peripancreatic tissues associated with acute or chronic pancreatitis. Endoscopic ultrasound (EUS)-guided drainage has become an established indication, having better results as compared to percutaneous drainage, nonguided endoscopic drainage...

  16. New method for calculation of integral characteristics of thermal plumes

    DEFF Research Database (Denmark)

    Zukowska, Daria; Popiolek, Zbigniew; Melikov, Arsen Krikor

    2008-01-01

    A method for calculation of integral characteristics of thermal plumes is proposed. The method allows for determination of the integral parameters of plumes based on speed measurements performed with omnidirectional low velocity thermoanemometers. The method includes a procedure for calculation...

  17. New method for calculation of integral characteristics of thermal plumes

    DEFF Research Database (Denmark)

    2008-01-01

    A method for calculation of integral characteristics of thermal plumes is proposed. The method allows for determination of the integral parameters of plumes based on speed measurements performed with omnidirectional low velocity thermoanemometers. The method includes a procedure for calculation...

  18. Visualising volcanic gas plumes with virtual globes

    Science.gov (United States)

    Wright, T. E.; Burton, M.; Pyle, D. M.; Caltabiano, T.

    2009-09-01

    The recent availability of small, cheap ultraviolet spectrometers has facilitated the rapid deployment of automated networks of scanning instruments at several volcanoes, measuring volcanic SO 2 gas flux at high frequency. These networks open up a range of other applications, including tomographic reconstruction of the gas distribution which is of potential use for both risk mitigation, particularly to air traffic, and environmental impact modelling. Here we present a methodology for visualising reconstructed plumes using virtual globes, such as Google Earth, which allows animations of the evolution of the gas plume to be displayed and easily shared on a common platform. We detail the process used to convert tomographically reconstructed cross-sections into animated gas plume models, describe how this process is automated and present results from the scanning network around Mt. Etna, Sicily. We achieved an average rate of one frame every 12 min, providing a good visual representation of the plume which can be examined from all angles. In creating these models, an approximation to turbulent diffusion in the atmosphere was required. To this end we derived the value of the turbulent diffusion coefficient for quiescent conditions near Etna to be around 200- 500m2s-1.

  19. Detection of contaminant plumes released from landfills

    Science.gov (United States)

    Yenigül, N. B.; Hendsbergen, A. T.; Elfeki, A. M. M.; Dekking, F. M.

    2006-06-01

    Contaminant leaks released from landfills are a significant threat to groundwater quality. The groundwater detection monitoring systems installed in the vicinity of such facilities are vital. In this study the detection probability of a contaminant plume released from a landfill has been investigated by means of both a simulation and an analytical model for both homogeneous and heterogeneous aquifer conditions. The results of the two models are compared for homogeneous aquifer conditions to illustrate the errors that might be encountered with the simulation model. For heterogeneous aquifer conditions contaminant transport is modelled by an analytical model using effective (macro) dispersivities. The results of the analysis show that the simulation model gives the concentration values correctly over most of the plume length for homogeneous aquifer conditions, and that the detection probability of a contaminant plume at given monitoring well locations match quite well. For heterogeneous aquifer conditions the approximating analytical model based on effective (macro) dispersivities yields the average concentration distribution satisfactorily. However, it is insufficient in monitoring system design since the discrepancy between the detection probabilities of contaminant plumes at given monitoring well locations computed by the two models is significant, particularly with high dispersivity and heterogeneity.

  20. Diagnostics of laser ablated plasma plumes

    DEFF Research Database (Denmark)

    Amoruso, S.; Toftmann, B.; Schou, Jørgen;

    2004-01-01

    The effect of an ambient gas on the expansion dynamics of laser ablated plasmas has been studied for two systems by exploiting different diagnostic techniques. First, the dynamics of a MgB2 laser produced plasma plume in an Ar atmosphere has been investigated by space-and time-resolved optical...

  1. Ablation plume dynamics in a background gas

    DEFF Research Database (Denmark)

    Amoruso, Salvatore; Schou, Jørgen; Lunney, James G.

    2010-01-01

    The expansion of a plume in a background gas of pressure comparable to that used in pulsed laser deposition (PLD) has been analyzed in terms of the model of Predtechensky and Mayorov (PM). This approach gives a relatively clear and simple description of the essential hydrodynamics during the expa...

  2. DSMC simulation of Europa water vapor plumes

    Science.gov (United States)

    Berg, J. J.; Goldstein, D. B.; Varghese, P. L.; Trafton, L. M.

    2016-10-01

    A computational investigation of the physics of water vapor plumes on Europa was performed with a focus on characteristics relevant to observation and spacecraft mission operations. The direct simulation Monte Carlo (DSMC) method was used to model the plume expansion assuming a supersonic vent source. The structure of the plume was determined, including the number density, temperature, and velocity fields. The possibility of ice grain growth above the vent was considered and deemed probable for large (diameter > ∼20 m) vents at certain Mach numbers. Additionally, preexisting grains of three diameters (0.1, 1, 50 μm) were included and their trajectories examined. A preliminary study of photodissociation of H2O into OH and H was performed to demonstrate the behavior of daughter species. A set of vent parameters was evaluated including Mach number (Mach 2, 3, 5), reduced temperature as a proxy for flow energy loss to the region surrounding the vent, and mass flow rate. Plume behavior was relatively insensitive to these factors, with the notable exception of mass flow rate. With an assumed mass flow rate of ∼1000 kg/s, a canopy shock occurred and a maximum integrated line of sight column density of ∼1020 H2O molecules/m2 was calculated, comparing favorably with observation (Roth et al., 2014a).

  3. Propagation of light through ship exhaust plumes

    NARCIS (Netherlands)

    Iersel, M. van; Mack, A.; Eijk, A.M.J. van; Schleijpen, H.M.A.

    2014-01-01

    Looking through the atmosphere, it is sometimes difficult to see the details of an object. Effects like scintillation and blur are the cause of these difficulties. Exhaust plumes of e.g. a ship can cause extreme scintillation and blur, making it even harder to see the details of what lies behind the

  4. DSMC simulation of Io's unsteady Tvashtar plume

    Science.gov (United States)

    Hoey, W. A.; Ackley, P. C.; Trafton, L. M.; Goldstein, D. B.; Varghese, P. L.

    2016-11-01

    Jupiter's moon Io supports its rarefied atmosphere with prolific tidally-driven episodic volcanism. Its largest volcanic plumes erupt violently and exhibit intricate structure, their canopies rising to hundreds of km above the Ionian surface. In early 2007, the NASA New Horizons (NH) spacecraft captured the active Tvashtar plume in a time sequence of panchromatic images at high spatial resolution and observed both discrete "filamentary" patterns in the descending particulate structure, and a prominent traveling canopy wave. These are transient and asymmetric features, indicative of Tvashtar's unresolved and complex vent processes. In this work, we introduce a methodology for identifying vent spatial and temporal scales in the rarefied plume. Three-dimensional DSMC simulations of the collisional gas flowfield are combined with a flow-tracking dust particle model, enabling a broad exploration of parameter space in pursuit of the critical frequencies that qualitatively reproduce the dynamical phenomena observed in Tvashtar's collisional canopy and providing insight into the dynamics of transient extra-terrestrial volcanic plumes.

  5. Relative Abundance Measurements in Plumes and Interplumes

    CERN Document Server

    Guennou, Chloé; Savin, Daniel Wolf

    2015-01-01

    We present measurements of relative elemental abundances in plumes and interplumes. Plumes are bright, narrow structures in coronal holes that extend along open magnetic field lines far out into the corona. Previous work has found that in some coronal structures the abundances of elements with a low first ionization potential (FIP) 10 eV). We have used EIS spectroscopic observations made on 2007 March 13 and 14 over an ~24 hour period to characterize abundance variations in plumes and interplumes. To assess their elemental composition, we have used a differential emission measure (DEM) analysis, which accounts for the thermal structure of the observed plasma. We have used lines from ions of iron, silicon, and sulfur. From these we have estimated the ratio of the iron and silicon FIP bias relative to that for sulfur. From the results, we have created FIP-bias-ratio maps. We find that the FIP-bias ratio is sometimes higher in plumes than in interplumes and that this enhancement can be time dependent. These res...

  6. Plume or no Plume, the Case of the Siberian Trap Formation

    Science.gov (United States)

    Reichow, M. K.; Saunders, A. D.; White, R. V.; Al'Mukhamedov, A. I.; Medvedev, A. I.; Inger, S.

    2003-12-01

    The generation mechanism of continental large igneous provinces, such as the Siberian Traps, are matters of recent debate, particularly their relation to mantle plumes derived from the Earth's interior. Alternative models relate the formation of large igneous provinces to bolide impacts or small-scale convection at the boundary of asymmetric lithospheres. Neither of these models is without criticism and each model cannot explain all characteristics of continental flood basalt formation alone. However, strong support for the involvement of a mantle plume comes from the observation that large volumes of basaltic melts ( ˜3 x 106 km3) erupted within a short period of time (pulse of volcanism extruded over large areas of the Siberian craton. Although the major and trace element data are consistent with a plume origin for the Siberian Traps, they cannot prove it; however, magma volume and timing constraints do strongly suggest that a mantle plume was involved in the formation of the Earth's largest continental flood basalt province.

  7. Evolution of Acid Mine Drainage Formation in Sulphidic Mine Tailings

    Directory of Open Access Journals (Sweden)

    Bernhard Dold

    2014-07-01

    Full Text Available Sulphidic mine tailings are among the largest mining wastes on Earth and are prone to produce acid mine drainage (AMD. The formation of AMD is a sequence of complex biogeochemical and mineral dissolution processes. It can be classified in three main steps occurring from the operational phase of a tailings impoundment until the final appearance of AMD after operations ceased: (1 During the operational phase of a tailings impoundment the pH-Eh regime is normally alkaline to neutral and reducing (water-saturated. Associated environmental problems include the presence of high sulphate concentrations due to dissolution of gypsum-anhydrite, and/or effluents enriched in elements such as Mo and As, which desorbed from primary ferric hydroxides during the alkaline flotation process. (2 Once mining-related operations of the tailings impoundment has ceased, sulphide oxidation starts, resulting in the formation of an acidic oxidation zone and a ferrous iron-rich plume below the oxidation front, that re-oxidises once it surfaces, producing the first visible sign of AMD, i.e., the precipitation of ferrihydrite and concomitant acidification. (3 Consumption of the (reactive neutralization potential of the gangue minerals and subsequent outflow of acidic, heavy metal-rich leachates from the tailings is the final step in the evolution of an AMD system. The formation of multi-colour efflorescent salts can be a visible sign of this stage.

  8. The Geochemistry of Acid Mine Drainage

    Science.gov (United States)

    Blowes, D. W.; Ptacek, C. J.; Jambor, J. L.; Weisener, C. G.

    2003-12-01

    Mine wastes are the largest volume of materials handled in the world (ICOLD, 1996). The generation of acidic drainage and the release of water containing high concentrations of dissolved metals from these wastes is an environmental problem of international scale. Acidic drainage is caused by the oxidation of sulfide minerals exposed to atmospheric oxygen. Although acid drainage is commonly associated with the extraction and processing of sulfide-bearing metalliferous ore deposits and sulfide-rich coal, acidic drainage can occur wherever sulfide minerals are excavated and exposed to atmospheric oxygen. Engineering projects, including road construction, airport development, and foundation excavation are examples of civil projects that have resulted in the generation of acidic drainage. On United States Forest Service Lands there are (2-5)×104 mines releasing acidic drainage (USDA, 1993). Kleinmann et al. (1991) estimated that more than 6,400 km of rivers and streams in the eastern United States have been adversely affected by mine-drainage water. About (0.8-1.6)×104 km of streams have been affected by metal mining in the western United States. The annual worldwide production of mine wastes exceeded 4.5 Gt in 1982 (ICOLD, 1996). Estimated costs for remediating mine wastes internationally total in the tens of billions of dollars ( Feasby et al.,1991).

  9. Volcanic Plume Measurements with UAV (Invited)

    Science.gov (United States)

    Shinohara, H.; Kaneko, T.; Ohminato, T.

    2013-12-01

    Volatiles in magmas are the driving force of volcanic eruptions and quantification of volcanic gas flux and composition is important for the volcano monitoring. Recently we developed a portable gas sensor system (Multi-GAS) to quantify the volcanic gas composition by measuring volcanic plumes and obtained volcanic gas compositions of actively degassing volcanoes. As the Multi-GAS measures variation of volcanic gas component concentrations in the pumped air (volcanic plume), we need to bring the apparatus into the volcanic plume. Commonly the observer brings the apparatus to the summit crater by himself but such measurements are not possible under conditions of high risk of volcanic eruption or difficulty to approach the summit due to topography etc. In order to overcome these difficulties, volcanic plume measurements were performed by using manned and unmanned aerial vehicles. The volcanic plume measurements by manned aerial vehicles, however, are also not possible under high risk of eruption. The strict regulation against the modification of the aircraft, such as installing sampling pipes, also causes difficulty due to the high cost. Application of the UAVs for the volcanic plume measurements has a big advantage to avoid these problems. The Multi-GAS consists of IR-CO2 and H2O gas analyzer, SO2-H2O chemical sensors and H2 semiconductor sensor and the total weight ranges 3-6 kg including batteries. The necessary conditions of the UAV for the volcanic plumes measurements with the Multi-GAS are the payloads larger than 3 kg, maximum altitude larger than the plume height and installation of the sampling pipe without contamination of the exhaust gases, as the exhaust gases contain high concentrations of H2, SO2 and CO2. Up to now, three different types of UAVs were applied for the measurements; Kite-plane (Sky Remote) at Miyakejima operated by JMA, Unmanned airplane (Air Photo Service) at Shinomoedake, Kirishima volcano, and Unmanned helicopter (Yamaha) at Sakurajima

  10. Lidar measurements of launch vehicle exhaust plumes

    Science.gov (United States)

    Dao, Phan D.; Curtis, David; Farley, Robert; Soletsky, Philip; Davidson, Gilbert; Gelbwachs, Jerry A.

    1997-10-01

    The Mobile Lidar Trailer (MLT) was developed and operated to characterize launch vehicle exhaust plume and its effects on the environment. Two recent applications of this facility are discussed in this paper. In the first application, the MLT was used to characterize plumes in the stratosphere up to 45 km in support of the Air Force Space and Missile Center's Rocket Impact on Stratospheric Ozone program. Solid rocket motors used by Titan IV and other heavy launch vehicles release large quantities of gaseous hydrochloric acid in the exhaust and cause concerns about a possible depletion of the ozone layer. The MLT was deployed to Cape Canaveral Air Station since October 1995 to monitor ozone and to investigate plume dynamics and properties. Six campaigns have been conducted and more are planned to provide unique data with the objective of addressing the environmental issues. The plume was observed to disperse rapidly into horizontally extended yet surprisingly thin layer with thickness recorded in over 700 lidar profiles to be less than 250 meters. MLT operates with the laser wavelengths of 532, 355 and 308 nm and a scanning receiving telescope. Data on particle backscattering at the three wavelengths suggest a consistent growth of particle size in the 2-3 hour observation sessions following the launch. In the second type of application, the MLT was used as a remote sensor of nitrogen dioxide, a caustic gaseous by-product of common liquid propellant oxidizer. Two campaigns were conducted at the Sol Se Mete Canyon test site in New Mexico in December 1996 an January 1997 to study the dispersion of nitrogen dioxide and rocket plume.

  11. A comparison of the turbulent entrainment process in line plumes and wall plumes

    Science.gov (United States)

    Parker, David; Burridge, Henry; Partridge, Jamie; Linden, Paul

    2016-11-01

    Flows driven by sources of buoyancy appear in a large number of geophysical and industrial applications. The process of turbulent entrainment in these flows is key to understanding how they evolve and how one might model them. It has been observed that the entrainment is reduced when a line source of buoyancy is positioned immediately adjacent to a wall. To gain insight into the effect of the wall on the entrainment process we perform simultaneous PIV and LIF on both line plumes, in the absence of any boundary, and when the source is adjacent to a vertical boundary forming a wall plume. The experiments are designed to isolate the effect of the wall by using the same experimental setup and parameters for both flows with the addition of the wall and half the buoyancy flux used in the wall plume case. Of particular interest is the effect the large scale eddies, forming at the edge of the plume and engulfing ambient fluid, have on the entrainment process. By using velocity statistics in a coordinate system based on the instantaneous scalar edge of the plume, a technique we have recently used to analyse similar effects in an axisymmetric plume, the significance of this large scale engulfment will be quantified.

  12. Gravity Drainage Kinetics of Papermaking Fibrous Suspensions

    Directory of Open Access Journals (Sweden)

    Przybysz Piotr

    2014-12-01

    Full Text Available The study analyses application possibilities of filtration and thickening models in evaluation of papermaking suspension drainage rate. The authors proposed their own method to estimate the drainage rate on the basis of an existing Ergun capillary model of liquid flow through a granular material. The proposed model was less sensitive to porosity changes than the Ergun model. An empirical verification proved robustness of the proposed approach. Taking into account discrepancies in the published data concerning how the drainage velocity of papermaking suspension is defined, this study examines which of the commonly applied models matches experimental results the best.

  13. Plume collimation for laser ablation electrospray ionization mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Vertes, Akos; Stolee, Jessica A.

    2016-06-07

    In various embodiments, a device may generally comprise a capillary having a first end and a second end; a laser to emit energy at a sample in the capillary to ablate the sample and generate an ablation plume in the capillary; an electrospray apparatus to generate an electrospray plume to intercept the ablation plume to produce ions; and a mass spectrometer having an ion transfer inlet to capture the ions. The ablation plume may comprise a collimated ablation plume. The device may comprise a flow cytometer. Methods of making and using the same are also described.

  14. Plume collimation for laser ablation electrospray ionization mass spectrometry

    Science.gov (United States)

    Vertes, Akos; Stolee, Jessica A.

    2016-06-07

    In various embodiments, a device may generally comprise a capillary having a first end and a second end; a laser to emit energy at a sample in the capillary to ablate the sample and generate an ablation plume in the capillary; an electrospray apparatus to generate an electrospray plume to intercept the ablation plume to produce ions; and a mass spectrometer having an ion transfer inlet to capture the ions. The ablation plume may comprise a collimated ablation plume. The device may comprise a flow cytometer. Methods of making and using the same are also described.

  15. Plume collimation for laser ablation electrospray ionization mass spectrometry

    Science.gov (United States)

    Vertes, Akos; Stolee, Jessica A.

    2014-09-09

    In various embodiments, a device may generally comprise a capillary having a first end and a second end; a laser to emit energy at a sample in the capillary to ablate the sample and generate an ablation plume in the capillary; an electrospray apparatus to generate an electrospray plume to intercept the ablation plume to produce ions; and a mass spectrometer having an ion transfer inlet to capture the ions. The ablation plume may comprise a collimated ablation plume. The device may comprise a flow cytometer. Methods of making and using the same are also described.

  16. Drainage filter technologies to mitigate site-specific phosphorus losses in agricultural drainage discharge

    DEFF Research Database (Denmark)

    Kjærgaard, Charlotte; Heckrath, Goswin Johann; Canga, Eriona;

    Losses of phosphorus (P) in drainage waters contribute an estimated 33% to the total agricultural P load in Denmark. Mitigating agricultural P losses is challenging, as critical P losses comprise only a very small fraction of actual soil P contents and are not directly related to fertilizer P input...... in drainage. The Danish “SUPREME-TECH” project (2010-2016) (www.supreme-tech.dk) aims at providing the scientific basis for developing cost-effective filter technologies for P in agricultural drainage waters. The project studies different approaches of implementing filter technologies including drainage well...... the occurrence of surface-induced precipitation processes. The P-retention efficiency of granular drainage filters and constructed wetlands was compared for treating drainage water, and a subcatchment analysis illustrated the potential of implementing such measures....

  17. Simulating the Fate and Transport of an Acid Mine Drainage Release Using the WASP model

    Science.gov (United States)

    Knightes, C. D.; Kate, S.; Avant, B. K.; Cyterski, M.; Washington, J.; Prieto, L.

    2016-12-01

    On August 5, 2015, approximately 3 million gallons of acid mine drainage were released from the Gold King Mine into Cement Creek in the San Juan River watershed (CO, NM, UT). The release further mobilized additional metals, which resulted in a large mass of solids and dissolved metals entering Cement Creek. These metals were released into the Animas River. As the release acidity was neutralized, the metals precipitated and formed the visually noticeable "yellow boy," which flowed down the San Juan River. We applied the Water Quality Analysis Simulation Program (WASP) using empirically based parameterization to simulate and describe the movement of the plume and total and dissolved concentrations of all metals, including Arsenic, Copper, Lead, and Zinc. We estimated that the plume took between approximately 1 to 3 days to pass any given location. The peak concentration of the plume took about 2 hours to reach Silverton, CO (16 rkm), 1.5 days to reach Durango, CO (94 rkm), 2.9 days to reach Farmington, NM, (190 rkm) and 5.8 days to reach Mexican Hat, UT (422 km). Total metal concentration decreased rapidly going downstream, dropping 80% upon entering the Animas at Silverton, CO, and 99.5% entering the San Juan at Farmington. Metal concentrations decreased by dilution, settling, and dispersion. Modeling suggests that deposition occurred primarily in the upper Animas River near Silverton and near Durango, which was supported with empirical evidence. This work demonstrates the utility of a combined empirical and mechanistic modeling analysis. We additionally investigate long-term residual effects and potential exposure concentrations during storm and snowmelt high flow periods after the visible plume had traversed the system.

  18. Fractal Analysis of Drainage Basins on Mars

    Science.gov (United States)

    Stepinski, T. F.; Marinova, M. M.; McGovern, P. J.; Clifford, S. M.

    2002-01-01

    We used statistical properties of drainage networks on Mars as a measure of martian landscape morphology and an indicator of landscape evolution processes. We utilize the Mars Orbiter Laser Altimeter (MOLA) data to construct digital elevation maps (DEMs) of several, mostly ancient, martian terrains. Drainage basins and channel networks are computationally extracted from DEMs and their structures are analyzed and compared to drainage networks extracted from terrestrial and lunar DEMs. We show that martian networks are self-affine statistical fractals with planar properties similar to terrestrial networks, but vertical properties similar to lunar networks. The uniformity of martian drainage density is between those for terrestrial and lunar landscapes. Our results are consistent with the roughening of ancient martian terrains by combination of rainfall-fed erosion and impacts, although roughening by other fluvial processes cannot be excluded. The notion of sustained rainfall in recent Mars history is inconsistent with our findings.

  19. Results of percutaneous transhepatic cholangiography drainages (PTCD)

    Energy Technology Data Exchange (ETDEWEB)

    Schoenemann, J.; Willems, M.; Wolf, G.; Fromme, M.

    1987-12-01

    From September 1980 to December 1986, 72 percutaneous transhepatic cholangiography drainages (PTCD) were performed in 64 patients (58 palliative in malignant obstructions, 14 temporary). The median duration of drainage was 26.8 days (2-183 days). The median survival time in 37 patients with palliative tumour drainage was 55.3 days (7-473 days). 9/37 patients survived longer than 3 months (max. 15.5 months). Complications occurred in 29.5% (10.3% severe). 3/64 patients (4.7%) died. Patients with palliative transpapillary drainages (23), especially with endoprostheses (14), survived longer, and the complication rate was lower. Therefore, we prefer the endoscopic transpapillary approach. PTCD patients must be selected carefully.

  20. Fractal Analysis of Drainage Basins on Mars

    Science.gov (United States)

    Stepinski, T. F.; Marinova, M. M.; McGovern, P. J.; Clifford, S. M.

    2002-01-01

    We used statistical properties of drainage networks on Mars as a measure of martian landscape morphology and an indicator of landscape evolution processes. We utilize the Mars Orbiter Laser Altimeter (MOLA) data to construct digital elevation maps (DEMs) of several, mostly ancient, martian terrains. Drainage basins and channel networks are computationally extracted from DEMs and their structures are analyzed and compared to drainage networks extracted from terrestrial and lunar DEMs. We show that martian networks are self-affine statistical fractals with planar properties similar to terrestrial networks, but vertical properties similar to lunar networks. The uniformity of martian drainage density is between those for terrestrial and lunar landscapes. Our results are consistent with the roughening of ancient martian terrains by combination of rainfall-fed erosion and impacts, although roughening by other fluvial processes cannot be excluded. The notion of sustained rainfall in recent Mars history is inconsistent with our findings.

  1. Plume meander and dispersion in a stable boundary layer

    Science.gov (United States)

    Hiscox, April L.; Miller, David R.; Nappo, Carmen J.

    2010-11-01

    Continuous lidar measurements of elevated plume dispersion and corresponding micrometeorology data are analyzed to establish the relationship between plume behavior and nocturnal boundary layer dynamics. Contrasting nights of data from the JORNADA field campaign in the New Mexico desert are analyzed. The aerosol lidar measurements were used to separate the plume diffusion (plume spread) from plume meander (displacement). Mutiresolution decomposition was used to separate the turbulence scale (90 s). Durations of turbulent kinetic energy stationarity and the wind steadiness were used to characterize the local scale and submesoscale turbulence. Plume meander, driven by submesoscale wind motions, was responsible for most of the total horizontal plume dispersion in weak and variable winds and strong stability. This proportion was reduced in high winds (i.e., >4 m s-1), weakly stable conditions but remained the dominant dispersion mechanism. The remainder of the plume dispersion in all cases was accounted for by internal spread of the plume, which is a small eddy diffusion process driven by turbulence. Turbulence stationarity and the wind steadiness are demonstrated to be closely related to plume diffusion and plume meander, respectively.

  2. THE ENVIRONMENTAL IMPACT OF ACID MINE DRAINAGE

    OpenAIRE

    GRAY, NICHOLAS FREDERICK; Sullivan, Monica

    2017-01-01

    This review examine the action of acid mine drainage (AMD), which is a multifactor pollutant, on surface waters. It affects aquatic ecosystems via a number of direct and indirect pathways. Major impact areas are coastal waters, rivers, lakes and estuaries, with AMD affecting ecosystems in different ways. Ground waters can also be severely impacted. Due to its complexity, the impact of AMD is particularly difficult to quantify and predict in lotic systems. Acid mine drainage pollut...

  3. Percutaneous drainage of pelvic fluid collection

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun Young; Sohn, Cheol Ho [School of Medicine Keimyung University, Daegu (Korea, Republic of)

    1995-10-15

    To evaluate safe access route and success rate of percutaneous drainage of pelvic fluid collection. The 35 percutaneous drainages of pelvic fluid collection under the CT and fluorosocpic guidance were done in 32 patients. The anterior transabdominal approach was done in 20 patients, while the nine patients used the transgluteal approach through greater sciatic foramen. Three patients, who had septated or noncommunicating abscesses, underwent drainage using both approaches. The catheter was removed when the patient's symptom and laboratory data were improved or the amount of drainage and the size of fluid collection were markedly reduced. Success, partial success and failure were classified. The causes of fluid collection were complication of intraabdominal operation in 27 patient. The diagnosis after drainage included abscess (21), loculated ascites (6), and hematoma (4). The 27 cases (30 procedure) were treated successfully and the mean duration of catheter insertion was 10 days. The partial successes were two cases (2 procedures), which had palliative purpose. Three cases (3 procedures) were failed, which were multiple loculated ascites of pancreatic origin (2) and recurrent abscess (1). The significant complication during the procedure or drainage was not noted.

  4. 46 CFR 171.155 - Drainage of an open boat.

    Science.gov (United States)

    2010-10-01

    ... PERTAINING TO VESSELS CARRYING PASSENGERS Drainage of Weather Decks § 171.155 Drainage of an open boat. The deck within the hull of an open boat must drain to the bilge. Overboard drainage of the deck is not... 46 Shipping 7 2010-10-01 2010-10-01 false Drainage of an open boat. 171.155 Section 171.155...

  5. Flows in Sunspot Plumes Detected with SOHO

    CERN Document Server

    Brynildsen, N; Brekke, P; Fredvik, T; Haugan, S V H; Kjeldseth-Moe, O; Wikstøl, O

    1998-01-01

    Bright EUV sunspot plumes have been observed in eight out of eleven different sunspot regions with the Coronal Diagnostic Spectrometer -- CDS on SOHO. From wavelength shifts we derive the line-of-sight velocity, relative to the average velocity in the rastered area, 120 arcsec x 120 arcsec. In sunspot plumes we find that the motion is directed away from the observer and increases with increasing line formation temperature, reaches a maximum between 15 and 41 km~s$^{-1}$ close to log T $\\approx$ 5.5, then decreases abruptly. The flow field in the corona is not well correlated with the flow in the transition region and we discuss briefly the implication of this finding.

  6. Plume RF interference calculations for space shuttle

    Science.gov (United States)

    Boynton, F. P.; Rajasekhar, P. S.

    1978-01-01

    During a static ground test of a full-scale SRM, measurements of attenuation of the UHF 416.5 MHz Range Safety Signal, the VHF voice link (230 MHz), and of S-band (c. 2.2. GHz) communications links were undertaken. Analyses of these results indicate that measurable attenuation did occur at all test frequencies. The measured attenuation levels are compared with a simple model in which the received signal is identified as that diffracted about the edge of the highly absorbing plume and the signal level in the shadow zone is evaluated using the formula for diffraction at a straight edge. The comparison is satisfactory at VHF and UHF frequencies, and slightly less so at S-band. Reasons for the discrepancies found at higher frequencies are discussed. A revised procedure which appears to relieve the accuracy problem was developed. This procedure is discussed along with applications to high altitude SRM plume attenuation.

  7. Numerical Modelling of Jets and Plumes

    DEFF Research Database (Denmark)

    Larsen, Torben

    1993-01-01

    An overview on numerical models for prediction of the flow and mixing processes in turbulent jets and plumes is given. The overview is structured to follow an increasing complexity in the physical and numerical principles. The various types of models are briefly mentioned, from the one-dimensiona......An overview on numerical models for prediction of the flow and mixing processes in turbulent jets and plumes is given. The overview is structured to follow an increasing complexity in the physical and numerical principles. The various types of models are briefly mentioned, from the one......-dimensional integral method to the general 3-dimensional solution of the Navier-Stokes equations. Also the predictive capabilities of the models are discussed. The presentation takes the perspective of civil engineering and covers issues like sewage outfalls and cooling water discharges to the sea....

  8. Electric Propulsion Plume Simulations Using Parallel Computer

    Directory of Open Access Journals (Sweden)

    Joseph Wang

    2007-01-01

    Full Text Available A parallel, three-dimensional electrostatic PIC code is developed for large-scale electric propulsion simulations using parallel supercomputers. This code uses a newly developed immersed-finite-element particle-in-cell (IFE-PIC algorithm designed to handle complex boundary conditions accurately while maintaining the computational speed of the standard PIC code. Domain decomposition is used in both field solve and particle push to divide the computation among processors. Two simulations studies are presented to demonstrate the capability of the code. The first is a full particle simulation of near-thruster plume using real ion to electron mass ratio. The second is a high-resolution simulation of multiple ion thruster plume interactions for a realistic spacecraft using a domain enclosing the entire solar array panel. Performance benchmarks show that the IFE-PIC achieves a high parallel efficiency of ≥ 90%

  9. Cruise Ship Plume Tracking Survey Report

    Science.gov (United States)

    2002-09-01

    The U. S. Environmental Protection Agency (EPA) is developing a Cruise Ship Discharge Assessment Report in response to a petition the agency received in March 2000. The petition requested that EPA assess and where necessary control discharges from cruise ships. Comments received during public hearings, in 2000, resulted in the EPA agreeing to conduct a survey to assess the discharge plumes resulting from cruise ships, operating in ocean waters off the Florida coast and to compare the results to the Alaska dispersion models. This survey report describes the daily activities of August 2001 Cruise Ship Plume Tracking Survey, and provides a synopsis of the observations from the survey. It also provides data that can be used to assess dispersion of cruise ship wastewater discharges, while in transit. A description of the survey methods is provided in Section 2. Survey results are presented in Section 3. Findings and conclusions are discussed in Section 4.

  10. Sub-Grid Scale Plume Modeling

    Directory of Open Access Journals (Sweden)

    Greg Yarwood

    2011-08-01

    Full Text Available Multi-pollutant chemical transport models (CTMs are being routinely used to predict the impacts of emission controls on the concentrations and deposition of primary and secondary pollutants. While these models have a fairly comprehensive treatment of the governing atmospheric processes, they are unable to correctly represent processes that occur at very fine scales, such as the near-source transport and chemistry of emissions from elevated point sources, because of their relatively coarse horizontal resolution. Several different approaches have been used to address this limitation, such as using fine grids, adaptive grids, hybrid modeling, or an embedded sub-grid scale plume model, i.e., plume-in-grid (PinG modeling. In this paper, we first discuss the relative merits of these various approaches used to resolve sub-grid scale effects in grid models, and then focus on PinG modeling which has been very effective in addressing the problems listed above. We start with a history and review of PinG modeling from its initial applications for ozone modeling in the Urban Airshed Model (UAM in the early 1980s using a relatively simple plume model, to more sophisticated and state-of-the-science plume models, that include a full treatment of gas-phase, aerosol, and cloud chemistry, embedded in contemporary models such as CMAQ, CAMx, and WRF-Chem. We present examples of some typical results from PinG modeling for a variety of applications, discuss the implications of PinG on model predictions of source attribution, and discuss possible future developments and applications for PinG modeling.

  11. [The value of wound drainage with or without suction].

    Science.gov (United States)

    Schmidt, J; Hasselbach, A; Schnorr, W; Baranek, T; Letsch, R

    2005-11-01

    Even though the discussion for desisting from wound drainage has arisen, this is not reflected in the reality of surgical treatment. In more than 90% of all procedures wound drainage is used. It remains to be proven whether suction drainage actually is superior to gravity drainage in everyday use. In a random study with 200 patients it was proven that suction drainage shows no significant advantage in liquid quantum, haematoma and the frequency of complications. We conclude that the economically favourable gravity drainage can replace the more expensive suction drainage in most cases.

  12. Comparison of the measured and modeled electron densities and temperatures in the ionosphere and plasmasphere during 14-16 May 1991

    Science.gov (United States)

    Pavlov, A. V.; Pavlova, N. M.

    2004-01-01

    The electron density and temperature in the ionosphere and plasmasphere measured by the Millstone Hill incoherent-scatter radar and the instruments on board of the EXOS-D satellite are compared with calculations from a time-dependent mathematical model of the Earth's ionosphere and plasmasphere during 14-16 May 1991. Use of [O]/[N2] correction factors with the NRLMSISE-00 model of the neutral atmosphere was found to bring the modeled and measured F-region main peak electron densities into agreement. It was found that the nighttime additional heating rate should be added to the normal photoelectron heating in the electron energy equation, in the nighttime plasmasphere region, in order for the model to reproduce the observed high plasmaspheric electron temperature within the Millstone Hill magnetic field flux tube in the Northern Hemisphere. The additional heating brings the measured and modeled electron temperatures into agreement in the plasmasphere and into a very large disagreement in the ionosphere, if the classical electron heat flux along magnetic field lines is used. An approach of Pavlov et al. (2000, 2001) based on a new effective electron thermal conductivity coefficient along the magnetic field line and the evaluated additional heating of electrons in the plasmasphere is used to explain the observed electron temperature in the ionosphere and plasmasphere. This approach leads to a heat flux which is less than that given by the classical theory. The effects of the additional plasmaspheric heating of electrons on the electron temperature and density are small at the F-region altitudes if the modified electron heat flux is used. We found that the resulting effect of vibrationally excited N2 and O2 on NmF2 is the decrease of the calculated NmF2 by up to a factor of about 2.7 by day and up to a factor of about 2.5 by night. The modeled electron temperature is very sensitive to the electron density, and this decrease in electron density results in an increase of

  13. Failures and complications of thoracic drainage

    Directory of Open Access Journals (Sweden)

    Đorđević Ivana

    2006-01-01

    Full Text Available Background/Aim. Thoracic drainage is a surgical procedure for introducing a drain into the pleural space to drain its contents. Using this method, the pleura is discharged and set to the physiological state which enables the reexpansion of the lungs. The aim of the study was to prove that the use of modern principles and protocols of thoracic drainage significantly reduces the occurrence of failures and complications, rendering the treatment more efficient. Methods. The study included 967 patients treated by thoracic drainage within the period from January 1, 1989 to June 1, 2000. The studied patients were divided into 2 groups: group A of 463 patients treated in the period from January 1, 1989 to December 31, 1994 in whom 386 pleural drainage (83.36% were performed, and group B of 602 patients treated form January 1, 1995 to June 1, 2000 in whom 581 pleural drainage (96.51% were performed. The patients of the group A were drained using the classical standards of thoracic drainage by the general surgeons. The patients of the group B, however, were drained using the modern standards of thoracic drainage by the thoracic surgeons, and the general surgeons trained for this kind of the surgery. Results. The study showed that better results were achieved in the treatment of the patients from the group B. The total incidence of the failures and complications of thoracic drainage decreased from 36.52% (group A to 12.73% (group B. The mean length of hospitalization of the patients without complications in the group A was 19.5 days versus 10 days in the group B. The mean length of the treatment of the patients with failures and complications of the drainage in the group A was 33.5 days versus 17.5 days in the group B. Conclusion. The shorter length of hospitalization and the lower morbidity of the studied patients were considered to be the result of the correct treatment using modern principles of thoracic drainage, a suitable surgical technique, and a

  14. Plume Comparisons between Segmented Channel Hall Thrusters

    Science.gov (United States)

    Niemack, Michael; Staack, David; Raitses, Yevgeny; Fisch, Nathaniel

    2001-10-01

    Angular ion flux plume measurements were taken in several configurations of segmented channel Hall thrusters. The configurations differed by the placement of relatively short rings made from materials with different conductive and secondary electron emission properties along the boron nitride ceramic channel of the thrusters (these have been shown to affect the plume [1]). The ion fluxes are compared with ion trajectory simulations based on plasma potential data acquired with a high speed emissive probe [2]. Preliminary results indicate that in addition to the physical properties of the segments, the plume angle can be strongly affected by the placement of segmented rings relative to the external and internal walls of the channel. [1] Y. Raitses, L. Dorf, A. Litvak and N. J. Fisch, Journal of Applied Physics 88, 1263, 2000 [2] D. Staack, Y. Raitses, N. J. Fisch, Parametric Investigations of Langmuir Probe Induced Perturbations in a Hall Thruster, DPP01 Poster Presentation This work was supported by the U.S. DOE Contract No. DE-ACO2-76-CHO3073.

  15. Monitoring and forecasting Etna volcanic plumes

    Directory of Open Access Journals (Sweden)

    S. Scollo

    2009-09-01

    Full Text Available In this paper we describe the results of a project ongoing at the Istituto Nazionale di Geofisica e Vulcanologia (INGV. The objective is to develop and implement a system for monitoring and forecasting volcanic plumes of Etna. Monitoring is based at present by multispectral infrared measurements from the Spin Enhanced Visible and Infrared Imager on board the Meteosat Second Generation geosynchronous satellite, visual and thermal cameras, and three radar disdrometers able to detect ash dispersal and fallout. Forecasting is performed by using automatic procedures for: i downloading weather forecast data from meteorological mesoscale models; ii running models of tephra dispersal, iii plotting hazard maps of volcanic ash dispersal and deposition for certain scenarios and, iv publishing the results on a web-site dedicated to the Italian Civil Protection. Simulations are based on eruptive scenarios obtained by analysing field data collected after the end of recent Etna eruptions. Forecasting is, hence, supported by plume observations carried out by the monitoring system. The system was tested on some explosive events occurred during 2006 and 2007 successfully. The potentiality use of monitoring and forecasting Etna volcanic plumes, in a way to prevent threats to aviation from volcanic ash, is finally discussed.

  16. Evidence for Little Shallow Entrainment in Starting Mantle Plumes

    Science.gov (United States)

    Lohmann, F. C.; Phipps Morgan, J.; Hort, M.

    2005-12-01

    Basalts from intraplate or hotspot ocean islands show distinct geochemical signatures. Their diversity in composition is generally believed to result from the upwelling plume entraining shallow mantle material during ascent, while potentially also entraining other deep regions of the mantle. Here we present results from analogue laboratory experiments and numerical modelling that there is evidence for little shallow entrainment into ascending mantle plumes, i.e. most of the plume signature is inherited from the source. We conducted laboratory experiments using glucose syrup contaminated with glass beads to visualize fluid flow and origin. The plume is initiated by heating from below or by injecting hot, uncontaminated syrup. Particle movement is captured by a CCD camera. In our numerical experiments we solve the Stokes equations for a viscous fluid at infinite Prandtl number with passive tracer particles being used to track fluid flow and entrainment rates, simulating laboratory as well as mantle conditions. In both analogue experiments and numerical models we observe the classical plume structure being embedded in a `sheath' of material from the plume source region that retains little of the original temperature anomaly of the plume source. Yet, this sheath ascends in the `slipstream' of the plume at speeds close to the ascent speed of the plume head, and effectively prevents the entrainment of surrounding material into the plume head or plume tail. We find that the source region is most effectively sampled by an ascending plume and that compositional variations in the source region are preserved during plume ascent. The plume center and plume sheath combined are composed of up to 85% source material. However, there is also evidence of significant entrainment of up to 30% of surrounding material into the outer layers of the plume sheath. Entrainment rates are found to be influenced by mantle composition and structure, with the radial viscosity profile of the

  17. Location of Agricultural Drainage Pipes and Assessment of Agricultural Drainage Pipe Conditions Using Ground Penetrating Radar

    Science.gov (United States)

    Methods are needed to not only locate buried agricultural drainage pipe, but to also determine if the pipes are functioning properly with respect to water delivery. The primary focus of this research project was to confirm the ability of ground penetrating radar (GPR) to locate buried drainage pipe ...

  18. Lunar maria - result of mantle plume activity?

    Science.gov (United States)

    Sharkov, E.

    It is generally accepted that lunar maria are the result of catastrophic impact events. However, comparative studying of the Earth's and the Moon's tectonomagmatic evolution could evidence about another way of these specific structures origin. Such studies showed that the both planetary bodies evolved on the close scenario: their geological development began after solidification of global magmatic oceans which led to appearance of their primordial crusts: granitic on the Earth and anorthositic - on the Moon. The further evolution of the both bodies occurred in two stages. For their first stages, lasted ˜2.5 mlrd. years on the Earth and ˜1.5 mlrd. years on the Moon, were typical melts, generated in depleted mantle (Bogatikov et al., 2000). However, at the boundary 2.2-2.0 Ga ago on the Earth and 3.9-3.8 Ga on the Moon another type of magmas appeared: geochemical enriched Fe-Ti picrites and basalts, characteristic for the terrestrial Phanerozoic plume-related situations, and basaltic mare magmatism with high-Ti varieties on the Moon. It suggests that evolution of the Earth's magmatism was linked with ascending of mantle plumes (superplumes) of two generation: (1) generated in the mantle, depleted during solidification of magmatic ocean and Archean magmatic activity, and (2) generated at the core-mantle boundary (CMB). The latter were enriched in the mantle fluid components (Fe, Ti, alkalies, etc); this lighter material could ascend to shallower depths, leading to change of tectonic processes, in particular, to appearance of plate tectonics as the major type of tectonomagmatic activity till now (Bogatikov et al., 2000). By analogy to the Earth, magmatism of the Moon was also linked with ascending of mantle plumes: (1) generated in the depleted mantle (magnesian suite) and (2) generated at the lunar CMB with liquid at that time metallic core (mare basalt and picrites with high-Ti varieties). Like on the Earth, these plumes were lighter than the older plumes, and

  19. Urban Drainage Modeling and Flood Risk Management

    Science.gov (United States)

    Schmitt, Theo G.; Thomas, Martin

    The European research project in the EUREKA framework, RisUrSim (Σ!2255) has been worked out by a project consortium including industrial mathematics and water engineering research institutes, municipal drainage works as well as an insurance company. The overall objective has been the development of a simulation to allow flood risk analysis and cost-effective management for urban drainage systems. In view of the regulatory background of European Standard EN 752, the phenomenon of urban flooding caused by surcharged sewer systems in urban drainage systems is analyzed, leading to the necessity of dual drainage modeling. A detailed dual drainage simulation model is described based upon hydraulic flow routing procedures for surface flow and pipe flow. Special consideration is given to the interaction between surface and sewer flow in order to most accurately compute water levels above ground as a basis for further assessment of possible damage costs. The model application is presented for small case study in terms of data needs, model verification, and first simulation results.

  20. Experimental study of oil plume stability: Parametric dependences and optimization.

    Science.gov (United States)

    Li, Haoshuai; Shen, Tiantian; Bao, Mutai

    2016-10-15

    Oil plume is known to interact with density layer in spilled oil. Previous studies mainly focused on tracking oil plumes and predicting their impact on marine environment. Here, simulated experiments are presented that investigated the conditions inducing the formation of oil plume, focusing especially on the effects of oil/water volume ratio, oil/dispersant volume rate, ambient stratification and optimal conditions of oil plume on determining whether a plume will trap or escape. Scenario simulations showed that OWR influences the residence time most, dispersants dosage comes second and salinity least. The optimum residence time starts from 2387s, occurred at approximately condition (OWR, 0.1, DOR, 25.53% and salinity, 32.38). No change in the relative distribution under the more scale tank was observed, indicating these provide the time evolution of the oil plumes.

  1. Life Cycle of Mantle Plumes: A perspective from the Galapagos Plume (Invited)

    Science.gov (United States)

    Gazel, E.; Herzberg, C. T.

    2009-12-01

    Hotspots are localized sources of heat and magmatism considered as modern-day evidence of mantle plumes. Some hotspots are related to massive magmatic production that generated Large Igneous Provinces (LIPS), an initial-peak phase of plume activity with a mantle source hotter and more magmatically productive than present-day hotspots. Geological mapping and geochronological studies have shown much lower eruption rates for OIB compared to lavas from Large Igneous Provinces LIPS such as oceanic plateaus and continental flood provinces. Our study is the first quantitative petrological comparison of mantle source temperatures and extent of melting for OIB and LIP sources. The wide range of primary magma compositions and inferred mantle potential temperatures for each LIP and OIB occurrence suggest that this rocks originated form a hotspot, a spatially localized source of heat and magmatism restricted in time. Extensive outcrops of basalt, picrite, and sometimes komatiite with circa 65-95 Ma ages occupy portions of the pacific shore of Central and South America included in the Caribbean Large Igneous Province (CLIP). There is general consensus of a Pacific-origin of CLIP and most studies suggest that it was produced by melting in the Galapagos mantle plume. The Galapagos connection is consistent with isotopic and geochemical similarities with lavas from the present-day Galapagos hotspot. A Galapagos link for rocks in South American oceanic complexes (eg. the island of Gorgona) is more controversial and requires future work. The MgO and FeO contents of lavas from the Galapagos related lavas and their primary magmas have decreased since the Cretaceous. From petrological modeling we infer that these changes reflect a cooling of the Galapagos mantle plume from a potential temperature of 1560-1620 C in the Cretaceous to 1500 C at the present time. These temperatures are higher than 1350 C for ambient mantle associated with oceanic ridges, and provide support for the mantle

  2. Plume tectonics and cratons formation in the early Earth

    Science.gov (United States)

    Gerya, T.; Stern, R. J.; Baes, M.; Fischer, R.; Sizova, E.; Sobolev, S. V.; Whattam, S. A.

    2015-12-01

    Modern geodynamics and continental growth are critically driven by subduction and plate tectonics, however how this tectonic regime started and what geodynamic regime was before remains controversial. Most present-day subduction initiation mechanisms require acting plate forces and/or pre-existing zones of lithospheric weakness, which are themselves the consequence of plate tectonics. Here, we focus on plume-lithosphere interactions and spontaneous plume-induced subduction initiation, which does not require pre-existing lithospheric fabric and is viable for both stagnant lid and mobile/deformable lid conditions. We present results of 2D and 3D numerical modeling of plume-induced deformation and associated crustal growth resulting from tectono-magmatic interaction of ascending mantle plumes with oceanic-type lithosphere. We demonstrate that weakening of the lithosphere by plume-induced magmatism is the key factor allowing for its internal deformation and differentiation resulting in continental crust growth. We also show that plume-lithosphere interaction can enable subduction and rudimentary plate tectonics initiation at the margins of a crustal plateau growing above the plume head. We argue that frequent plume-arc interactions recorded in Archean crust could reflect either short-term plume-induced subduction or plume-induced episodic lithospheric drips. We furthermore suggest a distinct plume-tectonics regime operated on Earth before plate tectonics, which was associated with widespread tectono-magmatic heat and mass exchange between the crust and the mantle. This regime was characterized by weak deformable plates with low topography, massive juvenile crust production from mantle derived melts, mantle-flows-driven crustal deformation, magma-assisted crustal convection and widespread development of lithospheric delamination and crustal drips. Plume tectonics also resulted in growth of hot depleted chemically buoyant subcrustal proto-cratonic mantle layer. Later

  3. Autogenic Drainage in Children With Cystic Fibrosis.

    Science.gov (United States)

    Corten, Lieselotte; Morrow, Brenda M

    2017-04-01

    Airway clearance is an essential part of the management of cystic fibrosis (CF) as it facilitates clearance of viscous pulmonary secretions. This review aimed to determine the effect of autogenic drainage (AD) and assisted autogenic drainage (AAD) compared with no, sham, or other types of airway clearance in children with CF. Two pediatric randomized cross-over trials were identified on the use of AD in children with CF; no studies were available on the use of AAD. In one study AD had a positive influence on the Huang score, and is preferred over postural drainage in this population. We could not determine the efficacy of AD and AAD in children with CF. We recommend the implementation of pediatric-specific randomized controlled trials with adequate sample sizes, appropriate clinical outcome measures, and analysis of adverse effects.

  4. [Methods of internal drainage of pancreatic pseudocysts].

    Science.gov (United States)

    Starkov, Yu G; Solodinina, E N; Zamolodchikov, R D

    2016-01-01

    To present own experience of internal drainage and characteristics of its different variants which are applied in various countries. Endosonography-assisted internal drainage of pancreatic pseudocysts was performed in 25 patients. Plastic stents were implanted in one stage without change of instruments while metal stents - with change of instruments during manipulation. Intervention was successful in 24 patients. In 1 case bleeding developed during cystostomy that required open surgery. Plastic and metal stents were used in 11 and 12 patients respectively. 1 patient had two pancreatic pseudocysts. Therefore 2 stents of both types were used in this case. Clinical success was achieved in 91% of cases. Different variants of method resolve problem of surgical approach, stomy and choice of stent. However every technique is targeted to resolve separate problem while single method is not accepted. Further large comparative studies are necessary to define optimal technique of internal drainage.

  5. Percutaneous epidural drainage through a burr hole

    Directory of Open Access Journals (Sweden)

    Priscila M Falsarella

    2016-01-01

    Full Text Available Intracranial extradural collection may cause an increase in intracranial pressure, requiring rapid emergency treatment to reduce morbidity and mortality. We described an alternative CT-guided percutaneous access for extradural collection drainage. We report a case of a patient with previous craniectomy for meningioma ressection who presented to the Emergency Department with symptoms of intracranial hypertension. Brains CT showed a extradural collection with subfalcine herniation. After multidisciplinary discussion a CT-guided percutaneous drainage through previous burr hole was performed. The patient was discharged after 36 hours of admission, without further symptoms. We describe a safe and effective alternative percutaneous access for extradural collection drainage in patients with previous burr hole.

  6. New method in computer simulations of electron and ion densities and temperatures in the plasmasphere and low-latitude ionosphere

    Directory of Open Access Journals (Sweden)

    A. V. Pavlov

    Full Text Available A new theoretical model of the Earth’s low- and mid-latitude ionosphere and plasmasphere has been developed. The new model uses a new method in ionospheric and plasmaspheric simulations which is a combination of the Eulerian and Lagrangian approaches in model simulations. The electron and ion continuity and energy equations are solved in a Lagrangian frame of reference which moves with an individual parcel of plasma with the local plasma drift velocity perpendicular to the magnetic and electric fields. As a result, only the time-dependent, one-dimension electron and ion continuity and energy equations are solved in this Lagrangian frame of reference. The new method makes use of an Eulerian computational grid which is fixed in space co-ordinates and chooses the set of the plasma parcels at every time step, so that all the plasma parcels arrive at points which are located between grid lines of the regularly spaced Eulerian computational grid at the next time step. The solution values of electron and ion densities Ne and Ni and temperatures Te and Ti at the Eulerian computational grid are obtained by interpolation. Equations which determine the trajectory of the ionospheric plasma perpendicular to magnetic field lines and take into account that magnetic field lines are "frozen" in the ionospheric plasma are derived and included in the new model. We have presented a comparison between the modeled NmF2 and hmF2 and NmF2 and hmF2 which were observed at the anomaly crest and close to the geomagnetic equator simultaneously by the Huancayo, Chiclayo, Talara, Bogota, Panama, and Puerto Rico ionospheric sounders during the 7 October 1957 geomagnetically quiet time period at solar maximum. The model calculations show that there is a need to revise the model local time dependence of the equatorial upward E × B drift velocity given by Scherliess and Fejer (1999 at solar maximum during quiet

  7. Marine bird aggregations associated with the tidally-driven plume and plume fronts of the Columbia River

    Science.gov (United States)

    Zamon, Jeannette E.; Phillips, Elizabeth M.; Guy, Troy J.

    2014-09-01

    Freshwater discharge from large rivers into the coastal ocean creates tidally-driven frontal systems known to enhance mixing, primary production, and secondary production. Many authors suggest that tidal plume fronts increase energy flow to fish-eating predators by attracting planktivorous fishes to feed on plankton aggregated by the fronts. However, few studies of plume fronts directly examine piscivorous predator response to plume fronts. Our work examined densities of piscivorous seabirds relative to the plume region and plume fronts of the Columbia River, USA. Common murres (Uria aalge) and sooty shearwaters (Puffinus griseus) composed 83% of all birds detected on mesoscale surveys of the Washington and Oregon coasts (June 2003-2006), and 91.3% of all birds detected on fine scale surveys of the plume region less than 40 km from the river mouth (May 2003 and 2006). Mesoscale comparisons showed consistently more predators in the central plume area compared to the surrounding marine area (murres: 10.1-21.5 vs. 3.4-8.2 birds km-2; shearwaters: 24.2-75.1 vs. 11.8-25.9 birds km-2). Fine scale comparisons showed that murre density in 2003 and shearwater density in both 2003 and 2006 were significantly elevated in the tidal plume region composed of the most recently discharged river water. Murres tended to be more abundant on the north face of the plume. In May 2003, more murres and shearwaters were found within 3 km of the front on any given transect, although maximum bird density was not necessarily found in the same location as the front itself. Predator density on a given transect was not correlated with frontal strength in either year. The high bird densities we observed associated with the tidal plume demonstrate that the turbid Columbia River plume does not necessarily provide fish with refuge from visual predators. Bird predation in the plume region may therefore impact early marine survival of Pacific salmon (Oncorhynchus spp.), which must migrate through the

  8. Algorithms and analysis for underwater vehicle plume tracing.

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Savage, Elizabeth L. (Texas A& M University, College Station, TX); Hurtado, John Edward (Texas A& M University, College Station, TX); Eskridge, Steven E.

    2003-07-01

    The goal of this research was to develop and demonstrate cooperative 3-D plume tracing algorithms for miniature autonomous underwater vehicles. Applications for this technology include Lost Asset and Survivor Location Systems (L-SALS) and Ship-in-Port Patrol and Protection (SP3). This research was a joint effort that included Nekton Research, LLC, Sandia National Laboratories, and Texas A&M University. Nekton Research developed the miniature autonomous underwater vehicles while Sandia and Texas A&M developed the 3-D plume tracing algorithms. This report describes the plume tracing algorithm and presents test results from successful underwater testing with pseudo-plume sources.

  9. An infrared method for plume rise visualization and measurement

    Science.gov (United States)

    Rickel, Cindy; Lamb, Brian; Guenther, Alex; Allwine, Eugene

    An infrared video camera and recording system were used to record near source plume rise from a low turbine stack at an oil gathering center at Prudhoe Bay, AK. The system provided real-time, continuous visualization of the plume using a color monitor while the images were recorded with a standard video tape recorder. Following the field study, single frame images were digitized using a micro-computer video system. As part of the digitization, the plume centerline was determined as well as an isotherm of the plume outline. In this application, one frame from each 2-min period in the record was digitized. The results were used to calculate the variability in plume centerline during each hour. During strong winds with blowing snow, the mean plume rise for the hour at 15 m downwind was 6±2 m. The observed plume rise from the turbine stack was greater than that calculated using momentum-only or buoyancy-only plume rise models and only slightly larger than that estimated from combined momentum-buoyancy plume rise models.

  10. Field experimental observations of highly graded sediment plumes

    DEFF Research Database (Denmark)

    Hjelmager Jensen, Jacob; Saremi, Sina; Jimenez, Carlos;

    2015-01-01

    A field experiment in the waters off the south-eastern coast of Cyprus was carried out to study near-field formation of sediment plumes from dumping. Different loads of sediment were poured into calm and limpid waters one at the time from just above the sea surface. The associated plumes, gravita......A field experiment in the waters off the south-eastern coast of Cyprus was carried out to study near-field formation of sediment plumes from dumping. Different loads of sediment were poured into calm and limpid waters one at the time from just above the sea surface. The associated plumes...

  11. Turbulence and Mixing in the Columbia River Plume

    Science.gov (United States)

    Kilcher, L. F.; Nash, J.; Moum, J.

    2004-12-01

    Thin bouyant plumes represent a technical challenge for in-situ observations. In July 2004 a unique set of measurements were taken in which our vertical microstructure profiler, Chameleon, and acoustics (300 kHz ADCP and 120 kHz echosounder) were modified to measure the O(1-5 m) thick plume. The Chameleon profiles included measurements of density, fluorescence, optical backscatter and turbulent energy dissipation. Intense turbulence was observed in plume fronts (with 30 m vertical displacements), at the plume base (with O(1 s-1) shear) and in O(20 m) thick bottom boundary layers. Preliminary results from 10 days of observations will be presented and discussed.

  12. Flows in Sunspot Plumes Detected with SOHO

    Science.gov (United States)

    Brynildsen, N.; Maltby, P.; Brekke, P.; Fredvik, T.; Haugan, S. V. H.; Kjeldseth-Moe, O.; Wikstol, O.

    1998-09-01

    In the Letter, ``Flows in Sunspot Plumes Detected with the Solar and Heliospheric Observatory'' by N. Brynildsen, P. Maltby, P. Brekke, T. Fredvik, S. V. H. Haugan, O. Kjeldseth-Moe, and Ø. Wikstøl (ApJ, 502, L85 [1998]), the following correction should be made: In the last line on page L86, which reads ``peak line intensity I>=5 are located (1) above the umbra or, '' an ``Ī'' should be inserted so that the revised line reads ``peak line intensity I>=5Ī are located (1) above the umbra or.''

  13. Gas drainage technology of high gas and thick coal seam

    Institute of Scientific and Technical Information of China (English)

    HE Tian-cai; LI Hai-gui; ZHANG Hai-jun

    2009-01-01

    Gas drainage in Jincheng Mining Group Co., Ltd. was introduced briefly and the importance of gas drainage in gas control was analyzed. Combined with coal-bed gas oc-currence and gas emission, the double system of gas drainage was optimized and a pro-gressive gas drainage model was experimented on. For guaranteed drainage, excavation and mining and realization of safety production and reasonable exploitation of gas in coal seams, many drainage methods were adopted to solve the gas problem of the working face.

  14. Channelization of plumes beneath ice shelves

    KAUST Repository

    Dallaston, M. C.

    2015-11-11

    © 2015 Cambridge University Press. We study a simplified model of ice-ocean interaction beneath a floating ice shelf, and investigate the possibility for channels to form in the ice shelf base due to spatial variations in conditions at the grounding line. The model combines an extensional thin-film description of viscous ice flow in the shelf, with melting at its base driven by a turbulent ocean plume. Small transverse perturbations to the one-dimensional steady state are considered, driven either by ice thickness or subglacial discharge variations across the grounding line. Either forcing leads to the growth of channels downstream, with melting driven by locally enhanced ocean velocities, and thus heat transfer. Narrow channels are smoothed out due to turbulent mixing in the ocean plume, leading to a preferred wavelength for channel growth. In the absence of perturbations at the grounding line, linear stability analysis suggests that the one-dimensional state is stable to initial perturbations, chiefly due to the background ice advection.

  15. Intercontinental transport of nitrogen oxide pollution plumes

    Directory of Open Access Journals (Sweden)

    M. Wenig

    2003-01-01

    Full Text Available We describe the first satellite observation of intercontinental transport of nitrogen oxides emitted by power plants, verified by simulations with a particle tracer model. The analysis of such episodes shows that anthropogenic NOx plumes may influence the atmospheric chemistry thousands of kilometers away from its origin, as well as the ocean they traverse due to nitrogen fertilization. This kind of monitoring became possible by applying an improved algorithm to extract the tropospheric fraction of NO2 from the spectral data coming from the GOME instrument. As an example we show the observation of NO2 in the time period 4--14 May, 1998, from the South African Plateau to Australia which was possible due to favourable weather conditions during that time period which availed the satellite measurement. This episode was also simulated with the Lagrangian particle dispersion model FLEXPART which uses NOx emissions taken from an inventory for industrial emissions in South Africa and is driven with analyses from the European Centre for Medium-Range Weather Forecasts. Additionally lightning emissions were taken into account by utilizing Lightning Imaging Sensor data. Lightning was found to contribute probably not more than 25% of the resulting concentrations. Both, the measured and simulated emission plume show matching patterns while traversing the Indian Ocean to Australia and show great resemblance to the aerosol and CO2 transport observed by Piketh et al. (2000.

  16. Urban drainage models - making uncertainty analysis simple

    DEFF Research Database (Denmark)

    Vezzaro, Luca; Mikkelsen, Peter Steen; Deletic, Ana

    2012-01-01

    There is increasing awareness about uncertainties in modelling of urban drainage systems and, as such, many new methods for uncertainty analyses have been developed. Despite this, all available methods have limitations which restrict their widespread application among practitioners. Here, a modif...

  17. 24 CFR 3280.610 - Drainage systems.

    Science.gov (United States)

    2010-04-01

    ... designs the system for site assembly and also provides all materials and components, including piping... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Drainage systems. 3280.610 Section 3280.610 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued...

  18. Reality named endoscopic ultrasound biliary drainage

    Institute of Scientific and Technical Information of China (English)

    Hugo; Gon?alo; Guedes; Roberto; Iglesias; Lopes; Joel; Fernandez; de; Oliveira; Everson; Luiz; de; Almeida; Artifon

    2015-01-01

    Endoscopic ultrasound(EUS) is used for diagnosis and evaluation of many diseases of the gastrointestinal (GI) tract. In the past, it was used to guide a cholangio-graphy, but nowadays it emerges as a powerful thera-peutic tool in biliary drainage. The aims of this review are: outline the rationale for endoscopic ultrasound-guided biliary drainage(EGBD); detail the procedural technique; evaluate the clinical outcomes and limitations of the method; and provide recommendations for the practicing clinician. In cases of failed endoscopic retro-grade cholangiopancreatography(ERCP), patients are usually referred for either percutaneous transhepatic biliary drainage(PTBD) or surgical bypass. Both these procedures have high rates of undesirable complications. EGBD is an attractive alternative to PTBD or surgery when ERCP fails. EGBD can be performed at two locations: transhepatic or extrahepatic, and the stent can be inserted in an antegrade or retrograde fashion. The drainage route can be transluminal, duodenal or trans-papillary, which, again, can be antegrade or retrograde [rendezvous(EUS-RV)]. Complications of all techniques combined include pneumoperitoneum, bleeding, bile leak/peritonitis and cholangitis. We recommend EGBD when bile duct access is not possible because of failed cannulation, altered upper GI tract anatomy, gastric outlet obstruction, a distorted ampulla or a periampullary diverticulum, as a minimally invasive alternative to surgery or radiology.

  19. [Artificial drainage devices--history, indications].

    Science.gov (United States)

    Barac, Ileana Ramona; Pop, Monica

    2012-01-01

    Glaucoma is a degenerative optic neuropathy progressive, multifactorial, which can lead to blindness. Blindness in patients with glaucoma is defined as visual field reduction below 10 degrees. Artificial drainage systems are a solution for refractory to medication, laser treatment or conventional surgery. Used by over 100 years, improved with good surgical technique and careful patient follow-up surgery, postoperative results are satisfactory.

  20. Optimizing the closed suction surgical drainage system.

    Science.gov (United States)

    Carruthers, Katherine H; Eisemann, Bradley S; Lamp, Susan; Kocak, Ergun

    2013-01-01

    Closed suction drains are indicated in a wide array of postoperative settings, with many distinct drainage systems available to the surgeon. The purpose of this study was to compare the suction gradients achieved using 2 different sizes of suction reservoirs and 2 different techniques for generating negative pressure. Drainage reservoirs of 100 and 400 ml were chosen to evaluate their ability to achieve suction. Suction was established in both sizes of drains by pressing the sides of the reservoir together or by pushing the bottom of the reservoir toward the top. Negative pressures were recorded with the reservoir empty, and after every 10-ml addition of saline. Averages were graphed to illustrate the applied suction over a range of drain volumes. The 100-ml drainage system reached a peak suction of -117.6 mmHg, while the 400-ml drainage system reached only a peak suction of -71.4 mmHg. Both of the maximum suction readings were achieved using the full-squeeze technique. The bottom-pushed-in technique did not result in any sustained measurable levels of suction using either of the reservoir volumes. Smaller drain reservoirs are more successful in generating a high initial suction than larger reservoirs, especially when the volume of fluid in the drain is relatively low. In all sizes of drains, compressing the sides of the reservoir is a far better technique for establishing negative pressure than pressing the bottom of the drain up toward the top.

  1. Selecting the drainage method for agricultural land

    NARCIS (Netherlands)

    Bos, M.G.

    2001-01-01

    To facilitate crop growth excess water should be drained from the rooting zone to allow root development of the crop and from the soil surface to facilitate access to the field. Basically, there are three drainage methods from which the designer can select being; surface drains, pumped tube wells an

  2. Drainage hydraulics of permeable friction courses

    Science.gov (United States)

    Charbeneau, Randall J.; Barrett, Michael E.

    2008-04-01

    This paper describes solutions to the hydraulic equations that govern flow in permeable friction courses (PFC). PFC is a layer of porous asphalt approximately 50 mm thick that is placed as an overlay on top of an existing conventional concrete or asphalt road surface to help control splash and hydroplaning, reduce noise, and enhance quality of storm water runoff. The primary objective of this manuscript is to present an analytical system of equations that can be used in design and analysis of PFC systems. The primary assumptions used in this analysis are that the flow can be modeled as one-dimensional, steady state Darcy-type flow and that slopes are sufficiently small so that the Dupuit-Forchheimer assumptions apply. Solutions are derived for cases where storm water drainage is confined to the PFC bed and for conditions where the PFC drainage capacity is exceeded and ponded sheet flow occurs across the pavement surface. The mathematical solutions provide the drainage characteristics (depth and residence time) as a function of rainfall intensity, PFC hydraulic conductivity, pavement slope, and maximum drainage path length.

  3. Impact of land drainage on peatland hydrology.

    Science.gov (United States)

    Holden, J; Evans, M G; Burt, T P; Horton, M

    2006-01-01

    There is a long history of drainage of blanket peat but few studies of the long-term hydrological impact of drainage. This paper aims to test differences in runoff production processes between intact and drained blanket peat catchments and determine whether there have been any long-term changes in stream flow since drainage occurred. Hillslope runoff processes and stream discharge were measured in four blanket peat catchments. Two catchments were drained with open-cut ditches in the 1950s. Ditching originally resulted in shorter lag times and flashier storm hydrographs but no change in the annual catchment runoff efficiency. In the period between 2002 and 2004, the hydrographs in the drained catchments, while still flashy, were less sensitive to rainfall than in the 1950s and the runoff efficiency had significantly increased. Drains resulted in a distinctive spatial pattern of runoff production across the slopes. Overland flow was significantly lower in the drained catchments where throughflow was more dominant. In the intact peatlands, matrix throughflow produced by peat layers below 10 cm was rare and produced structure could explain the long-term changes in river flow, which are in addition to those occurring in the immediate aftermath of peatland drainage.

  4. Interventional radiology in the lacrimal drainage system

    Energy Technology Data Exchange (ETDEWEB)

    Ilgit, Erhan T. [Department of Radiology, School of Medicine, Gazi University, Besevler 06510, Ankara (Turkey)]. E-mail: erhanti@gazi.edu.tr; Oenal, Baran [Department of Radiology, School of Medicine, Gazi University, Besevler 06510, Ankara (Turkey); Coskun, Bilgen [Department of Radiology, School of Medicine, Gazi University, Besevler 06510, Ankara (Turkey)

    2005-09-01

    This article presents a review of the interventional radiological procedures in the lacrimal drainage system. Balloon dacryocystoplasty and nasolacrimal polyurethane stent placement are the main fluoroscopically guided interventions for the treatment of epiphora by recanalizing the obstructed LDS. These procedures can also be used for dacryolith removal and lacrimal sac abscess treatment.

  5. GEOS 1 observations of low-energy ions in the earth's plasmasphere - A study on composition, and temperature and density structure under quiet geomagnetic conditions

    Science.gov (United States)

    Farrugia, C. J.; Geiss, J.; Balsiger, H.; Young, D. T.

    Data are presented on the composition and the temperature (T) and density (N) distributions of the earth's plasmasphere ionic population, obtained from GEOS 1 thermal-ion data. In deriving the N and T of the ions, a novel technique was employed, which is based on the modulation of the count rates by the spacecraft's spin. It was found that, for the major ion species H(+) and He(+), the relative density abundance He(+)/H(+) value of several percent was fairly common; the H(+) and He(+) ions are generally in thermal equilibrium, with temperatures varying between 4000 and 15,000 K, with a tendency to increase with L value. A comparison of the thermal structure obtained with those obtained by the Plasma Composition Experiment on ISEE and the Retarding Ion Mass Spectrometer on DE 1 showed no systematic difference between the 'energy' techniques used in these studies and the present 'angular' technique.

  6. Large-Amplitude Transmitter-Associated and Lightning-Associated Whistler Waves in the Earth's Inner Plasmasphere at L less than 2

    Science.gov (United States)

    Breneman, A.; Cattell, C.; Wygant, J.; Kersten, K.; Wilson, L. B., III; Schreiner, S.; Kellogg, P. J.; Goetz, K.

    2011-01-01

    We report observations of very large amplitude whistler mode waves in the Earth fs nightside inner radiation belt enabled by the STEREO Time Domain Sampler. Amplitudes range from 30.110 mV/m (zero ]peak), 2 to 3 orders of magnitude larger than previously observed in this region. Measurements from the peak electric field detector (TDSMax) indicate that these large ]amplitude waves are prevalent throughout the plasmasphere. A detailed examination of high time resolution electric field waveforms is undertaken on a subset of these whistlers at L 100 keV) electrons on a time scale of <1 s and thus may be an important previously unaccounted for source of energization or pitch ]angle scattering in the inner radiation belt.

  7. Physical modeling of transverse drainage mechanisms

    Science.gov (United States)

    Douglass, J. C.; Schmeeckle, M. W.

    2005-12-01

    Streams that incise across bedrock highlands such as anticlines, upwarps, cuestas, or horsts are termed transverse drainages. Their relevance today involves such diverse matters as highway and dam construction decisions, location of wildlife corridors, better-informed sediment budgets, and detailed studies into developmental histories of late Cenozoic landscapes. The transient conditions responsible for transverse drainage incision have been extensively studied on a case-by-case basis, and the dominate mechanisms proposed include: antecedence, superimposition, overflow, and piracy. Modeling efforts have been limited to antecedence, and such the specific erosional conditions required for transverse drainage incision, with respect to the individual mechanisms, remains poorly understood. In this study, fifteen experiments attempted to simulate the four mechanisms and constructed on a 9.15 m long, 2.1 m wide, and 0.45 m deep stream table. Experiments lasted between 50 and 220 minutes. The stream table was filled with seven tons of sediment consisting of a silt and clay (30%) and a fine to coarse sand (70%) mixture. The physical models highlighted the importance of downstream aggradation with regard to antecedent incision versus possible defeat and diversion. The overflow experiments indicate that retreating knickpoints across a basin outlet produce a high probability of downstream flooding when associated with a deep lake. Misters used in a couple of experiments illustrate a potential complication with regard to headward erosion driven piracy. Relatively level asymmetrically sloped ridges allow for the drainage divide across the ridge to retreat from headward erosion, but hindered when the ridge's apex undulates or when symmetrically sloped. Although these physical models cannot strictly simulate natural transverse drainages, the observed processes, their development over time, and resultant landforms roughly emulate their natural counterparts. Proposed originally from

  8. Topological Analysis of Urban Drainage Networks

    Science.gov (United States)

    Yang, Soohyun; Paik, Kyungrock; McGrath, Gavan; Rao, Suresh

    2016-04-01

    Urban drainage networks are an essential component of infrastructure, and comprise the aggregation of underground pipe networks carrying storm water and domestic waste water for eventual discharge to natural stream networks. Growing urbanization has contributed to rapid expansion of sewer networks, vastly increasing their complexity and scale. Importance of sewer networks has been well studied from an engineering perspective, including resilient management, optimal design, and malfunctioning impact. Yet, analysis of the urban drainage networks using complex networks approach are lacking. Urban drainage networks consist of manholes and conduits, which correspond to nodes and edges, analogous to junctions and streams in river networks. Converging water flows in these two networks are driven by elevation gradient. In this sense, engineered urban drainage networks share several attributes of flows in river networks. These similarities between the two directed, converging flow networks serve the basis for us to hypothesize that the functional topology of sewer networks, like river networks, is scale-invariant. We analyzed the exceedance probability distribution of upstream area for practical sewer networks in South Korea. We found that the exceedance probability distributions of upstream area follow power-law, implying that the sewer networks exhibit topological self-similarity. The power-law exponents for the sewer networks were similar, and within the range reported from analysis of natural river networks. Thus, in line with our hypothesis, these results suggest that engineered urban drainage networks share functional topological attributes regardless of their structural dissimilarity or different underlying network evolution processes (natural vs. engineered). Implications of these findings for optimal design of sewer networks and for modeling sewer flows will be discussed.

  9. Exit and Paradise Creek Drainage Area Boundaries, Alaska, 2012

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset contains drainage area boundaries for Exit Creek and Paradise Creek in Kenai Fjords National Park, Alaska. A drainage area boundary identifies the land...

  10. Clinical outcome of routine drainage in simple laparoscopic cholecystectomy

    Directory of Open Access Journals (Sweden)

    LIANG Zongchao

    2013-03-01

    Full Text Available ObjectiveTo retrospectively review outcomes of elective laparoscopic cholecystectomy (LC to evaluate the benefit of routine drainage in uncomplicated surgeries. MethodsTwo-hundred-and-ninety-five patients with cholecystolithiasis or gallbladder polyps who underwent LC with drainage (n=145 and or without drainage (n=150 between 2009 and 2011 were enrolled in the study. The decision for drainage was randomized. ResultsThe LC without drainage group had significantly shorter time to first flatus and shorter length of postoperative hospital stay than the LC with drainage group. One patient in the drainage group developed an intra-abdominal abscess, but there was no significant difference between the two LC groups with respect to overall postoperative complication rate. ConclusionApplication of a peritoneal drainage tube after simple elective, uncomplicated LC did not provide any clinical benefit to the patients, and should be considered according to the operating physician′s judgment on a case-by-case basis.

  11. A Theoretical Study of Subsurface Drainage Model Simulation of ...

    African Journals Online (AJOL)

    A Theoretical Study of Subsurface Drainage Model Simulation of Drainage Flow and ... of subsurface drain spacing, evapotranspiration and irrigation water quality on ... The study was carried out on a conceptual uniform homogenous irrigated ...

  12. Investigating the source of contaminated plumes downstream of the Alborz Sharghi coal washing plant using EM34 conductivity data, VLF-EM and DC-resistivity geophysical methods

    Science.gov (United States)

    Shiraz, Farzin Amirkhani; Ardejani, Faramarz Doulati; Moradzadeh, Ali; Arab-Amiri, Ali Reza

    2013-01-01

    Coal washing factories may create serious environmental problems due to pyrite oxidation and acid mine drainage generation from coal waste piles on nearby land. Infiltration of pyrite oxidation products through the porous materials of the coal waste pile by rainwater cause changes in the conductivity of underground materials and groundwater downstream of the pile. Electromagnetic and electrical methods are effective for investigation and monitoring of the contaminated plumes caused by coal waste piles and tailings impoundments. In order to investigate the environmental impact from a coal waste pile at the Alborz Sharghi coal washing plant, an EM34 ground conductivity meter was used on seven parallel lines in an E-W direction, downstream of the waste pile. Two-dimensional resistivity models obtained by the inversion of EM34 conductivity data identified conductive leachate plumes. In addition, quasi-3D inversion of EM34 data has confirmed the decreasing resistivity at depth due to the contaminated plumes. Comparison between EM34, VLF and DC-resistivity datasets, which were acquired for similar survey lines, agree well in identifying changes in the resistivity trend. The EM34 and DC-resistivity sections have greater similarity and better smoothness rather than those of the VLF model. Two-dimensional inversion models of these methods have shown some contaminated plumes with low resistivity.

  13. Converging Supergranular Flows and the Formation of Coronal Plumes

    Science.gov (United States)

    Wang, Y.-M.; Warren, H. P.; Muglach, K.

    2016-01-01

    Earlier studies have suggested that coronal plumes are energized by magnetic reconnection between unipolar flux concentrations and nearby bipoles, even though magnetograms sometimes show very little minority-polarity flux near the footpoints of plumes. Here we use high-resolution extreme-ultraviolet (EUV) images and magnetograms from the Solar Dynamics Observatory (SDO) to clarify the relationship between plume emission and the underlying photospheric field. We find that plumes form where unipolar network elements inside coronal holes converge to form dense clumps, and fade as the clumps disperse again. The converging flows also carry internetwork fields of both polarities. Although the minority-polarity flux is sometimes barely visible in the magnetograms, the corresponding EUV images almost invariably show loop-like features in the core of the plumes, with the fine structure changing on timescales of minutes or less. We conclude that the SDO observations are consistent with a model in which plume emission originates from interchange reconnection in converging flows, with the plume lifetime being determined by the approximately 1-day evolutionary timescale of the supergranular network. Furthermore, the presence of large EUV bright points and/or ephemeral regions is not a necessary precondition for the formation of plumes, which can be energized even by the weak, mixed-polarity internetwork fields swept up by converging flows.

  14. Ocean outfall plume characterization using an Autonomous Underwater Vehicle.

    Science.gov (United States)

    Rogowski, Peter; Terrill, Eric; Otero, Mark; Hazard, Lisa; Middleton, William

    2013-01-01

    A monitoring mission to map and characterize the Point Loma Ocean Outfall (PLOO) wastewater plume using an Autonomous Underwater Vehicle (AUV) was performed on 3 March 2011. The mobility of an AUV provides a significant advantage in surveying discharge plumes over traditional cast-based methods, and when combined with optical and oceanographic sensors, provides a capability for both detecting plumes and assessing their mixing in the near and far-fields. Unique to this study is the measurement of Colored Dissolved Organic Matter (CDOM) in the discharge plume and its application for quantitative estimates of the plume's dilution. AUV mission planning methodologies for discharge plume sampling, plume characterization using onboard optical sensors, and comparison of observational data to model results are presented. The results suggest that even under variable oceanic conditions, properly planned missions for AUVs equipped with an optical CDOM sensor in addition to traditional oceanographic sensors, can accurately characterize and track ocean outfall plumes at higher resolutions than cast-based techniques.

  15. Identification of mantle plumes in the Emeishan Large Igneous Province

    Institute of Scientific and Technical Information of China (English)

    Yi-Gang Xu; Jifeng Xu; Yue-Jun Wang; Bin He; Xiaolong Huang; Zhenyu Luo; Sun-Lin Chung; Long Xiao; Dan Zhu; Hui Shao; Wei-Ming Fan

    2007-01-01

    @@ The plume hypothesis has been recently challengedlargely because some fundamental aspects predicted bythe modeling of plumes are found to be lacking in someclassic hotspot regions. This review paper summarizesrecent achievements made in the late Permian Emeishan continental flood basalt province in southwest China.

  16. CONVERGING SUPERGRANULAR FLOWS AND THE FORMATION OF CORONAL PLUMES

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.-M.; Warren, H. P. [Space Science Division, Naval Research Laboratory, Washington, DC 20375 (United States); Muglach, K., E-mail: yi.wang@nrl.navy.mil, E-mail: harry.warren@nrl.navy.mil, E-mail: karin.muglach@nasa.gov [Code 674, NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2016-02-20

    Earlier studies have suggested that coronal plumes are energized by magnetic reconnection between unipolar flux concentrations and nearby bipoles, even though magnetograms sometimes show very little minority-polarity flux near the footpoints of plumes. Here we use high-resolution extreme-ultraviolet (EUV) images and magnetograms from the Solar Dynamics Observatory (SDO) to clarify the relationship between plume emission and the underlying photospheric field. We find that plumes form where unipolar network elements inside coronal holes converge to form dense clumps, and fade as the clumps disperse again. The converging flows also carry internetwork fields of both polarities. Although the minority-polarity flux is sometimes barely visible in the magnetograms, the corresponding EUV images almost invariably show loop-like features in the core of the plumes, with the fine structure changing on timescales of minutes or less. We conclude that the SDO observations are consistent with a model in which plume emission originates from interchange reconnection in converging flows, with the plume lifetime being determined by the ∼1 day evolutionary timescale of the supergranular network. Furthermore, the presence of large EUV bright points and/or ephemeral regions is not a necessary precondition for the formation of plumes, which can be energized even by the weak, mixed-polarity internetwork fields swept up by converging flows.

  17. Effects of ambient turbulence on a particle plume

    Science.gov (United States)

    Lai, Adrian C. H.; Er, J. W.; Law, Adrian W. K.; Adams, E. Eric

    2015-11-01

    We investigated experimentally the effects of ambient turbulence on a particle plume. Homogeneous and isotropic turbulent ambient water was generated by a random jet array in a glass tank. Glass beads of different particle diameters were released continuously into this turbulent ambient using a submerged hourglass, forming particle plumes with a constant efflux velocity; different initial velocities were tested for each particle size. We focused on the region in which the integral length scale of the ambient eddies is larger than that of the particle plume size. Following the arguments of Hunt (1994) and the observation of Hubner (2004) on a single-phase plume, it is expected that in this region, the internal structure or Lagrangian spreading of the particle plume, will not be significantly affected, but the plume centerline would meander due to the ambient turbulence leading to an increase in the Eulerian width. In the presentation, first, we will present our preliminary experimental data which showed that this is also true for two-phase particle plumes. Second, based on this observation, we developed a theoretical framework using a stochastic approach to predict the spreading of the plume. Predictions of the model will be compared with our experimental data. This research was supported by the National Research Foundation Singapore through the Singapore MIT Alliance for Research and Technology's Center for Environmental Sensing and Modeling interdisciplinary research program.

  18. The Structure of Enceladus' Plume from Cassini Occultation Observations

    Science.gov (United States)

    Hansen, C. J.; Esposito, L. W.; Buffington, B. B.; Colwell, J.; Hendrix, A. R.; Meinke, B. K.; Shemansky, D. E.; Stewart, I.; West, R. A.

    2011-12-01

    Cassini's Ultraviolet Imaging Spectrograph (UVIS) has observed 2 stellar and one solar occultation by Enceladus' water vapor plume. These observations have established that water is the primary constituent of the plume, allowed us to calculate the flux of water coming from the plume, and detected super-sonic jets of gas imbedded within the plume [1]. On 19 October 2011 two stars (epsilon and zeta Orionis) will simultaneously be occulted by the plume, and the signal of the two will be in separate pixels on the detector. This is a tangential occultation that will provide a horizontal cut through the plume at two altitudes. The two stars are separated by 24 mrad, or ~20 km, with the lower altitude star 18 km above the limb at its closest point. The groundtrack is similar to the 2010 solar occultation, but viewed from the other side of the plume. Results from this new data set with implications for the vertical structure of the plume and jets will be presented.

  19. Laboratory-Scale Simulation of Spiral Plumes in the Mantle

    CERN Document Server

    Sharifulin, A N

    2012-01-01

    On the basis of laboratory simulation a mechanism is established for the formation of the upper mantle convection spiral plumes from a hot point in the presence of a roll-type large-scale convective flow. The observed plume has horizontal sections near the upper limit, which may lead to the formation of chains of volcanic islands.

  20. Determining resolvability of mantle plumes with synthetic seismic modeling

    Science.gov (United States)

    Maguire, R.; Van Keken, P. E.; Ritsema, J.; Fichtner, A.; Goes, S. D. B.

    2014-12-01

    Hotspot volcanism in locations such as Hawaii and Iceland is commonly thought to be associated with plumes rising from the deep mantle. In theory these dynamic upwellings should be visible in seismic data due to their reduced seismic velocity and their effect on mantle transition zone thickness. Numerous studies have attempted to image plumes [1,2,3], but their deep mantle origin remains unclear. In addition, a debate continues as to whether lower mantle plumes are visible in the form of body wave travel time delays, or whether such delays will be erased due to wavefront healing. Here we combine geodynamic modeling of mantle plumes with synthetic seismic waveform modeling in order to quantitatively determine under what conditions mantle plumes should be seismically visible. We model compressible plumes with phase changes at 410 km and 670 km, and a viscosity reduction in the upper mantle. These plumes thin from greater than 600 km in diameter in the lower mantle, to 200 - 400 km in the upper mantle. Plume excess potential temperature is 375 K, which maps to seismic velocity reductions of 4 - 12 % in the upper mantle, and 2 - 4 % in the lower mantle. Previous work that was limited to an axisymmetric spherical geometry suggested that these plumes would not be visible in the lower mantle [4]. Here we extend this approach to full 3D spherical wave propagation modeling. Initial results using a simplified cylindrical plume conduit suggest that mantle plumes with a diameter of 1000 km or greater will retain a deep mantle seismic signature. References[1] Wolfe, Cecily J., et al. "Seismic structure of the Iceland mantle plume." Nature 385.6613 (1997): 245-247. [2] Montelli, Raffaella, et al. "Finite-frequency tomography reveals a variety of plumes in the mantle." Science 303.5656 (2004): 338-343. [3] Schmandt, Brandon, et al. "Hot mantle upwelling across the 660 beneath Yellowstone." Earth and Planetary Science Letters 331 (2012): 224-236. [4] Hwang, Yong Keun, et al

  1. Turbulence statistics in a negatively buoyant particle plume - laboratory measurement

    Science.gov (United States)

    Bordoloi, Ankur; Clark, Laura; Veliz, Gerardo; Heath, Michael; Variano, Evan

    2016-11-01

    Negatively buoyant plumes of nylon particles are investigated in quiescent salt-water solution using flow visualization and stereoscopic PIV. Particles of the size 2 mm are continuously released through a nozzle from the top inside a water tank using a screw-conveyor based release mechanism. The plume propagates downward due to gravity, and by virtue of interacting particle wakes, becomes turbulent. The two phases are refractive index matched, so that the velocity field in the interstitial fluid can be quantified using PIV. We examine the velocity fields in the fluid phase to characterize turbulence statistics, such as turbulent kinetic energy, Reynolds stresses in the fully developed region of the plume. Further, we develop an image processing method to obtain particle distribution and particle slip inside the plume. In the presentation, we will discuss these results in the light of existing literature for rising plumes of bubbles under similar experimental conditions.

  2. Characterization of redox conditions in groundwater contaminant plumes

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Bjerg, Poul Løgstrup; Banwarth, Steven A.

    2000-01-01

    Evaluation of redox conditions in groundwater pollution plumes is often a prerequisite for understanding the behaviour of the pollutants in the plume and for selecting remediation approaches. Measuring of redox conditions in pollution plumes is, however, a fairly recent issue and yet relative few...... dubious, if not erroneous. Several other approaches have been used in addressing redox conditions in pollution plumes: redox-sensitive compounds in groundwater samples, hydrogen concentrations in groundwater, concentrations of volatile fatty acids in groundwater, sediment characteristics and microbial...... cases have been reported. No standardised or generally accepted approach exists. Slow electrode kinetics and the common lack of internal equilibrium of redox processes in pollution plumes make, with a few exceptions, direct electrochemical measurement and rigorous interpretation of redox potentials...

  3. Numerical Studies on Fire-induced Thermal Plumes

    Institute of Scientific and Technical Information of China (English)

    Junmei LI; Yanfeng LI; Wan Ki CHOW; Huairong HUANG

    2005-01-01

    Most of the expressions describing fire plumes reported in the literature are known to be based on experiments.Due to different experimental methods, the geometry of the fire sources, fuel types and surrounding conditions, it is difficult to derive a comprehensive picture of a plume with its temperature and velocity fields on the basis of existing theoretical work. Computational Fluid Dynamics (CFD), which is regarded as a practical engineering tool in fire engineering by the experts, is sure to be able to give more details of the plume behavior under various situations. Aerodynamics for thermally-induced plumes will be studied numerically with CFD. Four typical axisymmetric plume equations will be assessed in this paper, and investigations will be useful for fire engineers in designing smoke management systems in an affordable fashion. This is a critical point in implementing engineering performance-based fire code.

  4. 46 CFR 178.420 - Drainage of cockpit vessels.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Drainage of cockpit vessels. 178.420 Section 178.420... TONS) INTACT STABILITY AND SEAWORTHINESS Drainage of Weather Decks § 178.420 Drainage of cockpit vessels. (a) Except as follows, the cockpit on a cockpit vessel may be watertight: (1) A cockpit may...

  5. West Antarctic Mantle Plume Hypothesis and Basal Water Generation

    Science.gov (United States)

    Ivins, Erik; Seroussi, Helene; Wiens, Doug; Bondzio, Johannes

    2017-04-01

    The hypothesis of a deep mantle plume that manifests Pliocene and Quaternary volcanism and present-day seismicity in West Antarctica has been speculated for more than 30 years. Recent seismic images support the plume hypothesis as the cause of Marie Byrd Land (MBL) volcanism and geophysical structure [ Lloyd et al., 2015; Ramirez et al., 2016]. Mantle plumes can more that double the geothermal heat flux, qGHF, above nominal continental values at their axial peak position and raise qGHF in the surrounding plume head to 60 mW/m2 or higher. Unfortunately, there is a dearth of in-situ basal ice sheet data that sample the heat flux. Consequently, we examine a realistic distribution of heat flux associated with a late-Cenozoic mantle plume in West Antarctica and explore its impact on thermal and melt conditions near the ice sheet base. The solid Earth model assumes a parameterized deep mantle plume and head. The 3-D ice flow model includes an enthalpy framework and full-Stokes stress balance. Both the putative plume location and extent are uncertain. Therefore, we perform broadly scoped experiments to characterize plume related basal conditions. The experiments show that mantle plumes have an important local impact on the ice sheet, with basal melting rates reaching several centimeters per year directly above the hotspot. The downstream active lake system of Whillans Ice Stream suggests a rift-related source of anomalous mantle heat. However, the lack of lake and stream activity in MBL suggests a relatively weak plume: one that delivers less flux by 35% below the heat flux to the crustal surface at the site of the Yellowstone hotspot [e.g., DeNosaquo et al., 2009], with peak value no higher than about 145 mW/m2.

  6. EFFECTIVENESS OF AUTOGENIC DRAINAGE VERSUS POSTURAL DRAINAGE ON OXYGEN SATURATION IN PATIENTS WITH CHRONIC BRONCHITIS WITH 15 MINUTES POST THERAPY

    OpenAIRE

    Kiran, V.; Dr. Bhimasen .S; E. Mastanaiah; A. Thiruppathi

    2014-01-01

    Background: Patients with COPD will have more amount of secretions. To clear the secretions by using of different bronchial hygiene techniques like postural drainage and autogenic drainage technique, manual hyperventilation technique ,active cycle breathing technique .Hence in this study to compare the short-term effects of postural drainage with clapping (PD) and autogenic drainage (AD) on level of oxygen saturation in blood, and amount of sputum recovery. Methodology: The study was done ...

  7. A plume spectroscopy system for flight applications

    Science.gov (United States)

    Makel, D. B.; Petersen, T. V.; Duncan, D. B.; Madzsar, G. C.

    1993-06-01

    An operational plume spectroscopy system will be an important element of any rocket engine health management system (HMS). The flight capable FPI spectrometer will enable prognosis and response to incipient rocket engine failures as well as diagnosis of wear and degradation for on-condition maintenance. Spectrometer application to development programs, such as the Space Lifter, NASP, and SSTO, will reduce program risks, allow better adherence to schedules and save money by reducing or eliminating redesign and test costs. The diagnostic capability of a proven, calibrated spectrometer will enhance post-burn certification of high value, reusable engines, such as the Space Shuttle Main Engine (SSME), where life and reliability are key cost drivers. This paper describes a prototype FPI spectrometer for demonstration and validation testing on NASA's Technology Test Bed Engine (TTBE) at Marshall Space Flight Center. The TTBE test unit is designed with flight prototype optics and a commercial off-the-shelf data processing system.

  8. Identification of discontinuities in plasma plume evolution

    CERN Document Server

    Gojani, Ardian B; Obayashi, Shigeru

    2013-01-01

    The ejection of material during laser ablation gives rise to the development of discontinuities in the ambient gas. Several of these discontinuities are observed and characterized, including externally and internally propagating shock waves, contact surface, and the ionization front. Qualitative experimental observations and analysis of these discontinuities is presented. Results from shadowgraphy enabled determination of an irradiance threshold between two different ablation mechanisms, and determination of several stages of plasma plume evolution. Consideration of the refractive index as a dynamic sum of the contributions from gas and electrons led to separate identification of ionization front from the contact surface. Furthermore, ionization front was observed to lead the shock wave at the earlier stage of the ablation.

  9. Modeling contaminant plumes in fractured limestone aquifers

    DEFF Research Database (Denmark)

    Mosthaf, Klaus; Brauns, Bentje; Fjordbøge, Annika Sidelmann

    the established approaches of the equivalent porous medium, discrete fracture and dual continuum models. However, these modeling concepts are not well tested for contaminant plume migration in limestone geologies. Our goal was to develop and evaluate approaches for modeling the transport of dissolved contaminant...... in the planning of field tests and to update the conceptual model in an iterative process. Field data includes information on spill history, distribution of the contaminant (multilevel sampling), geology and hydrogeology. To describe the geology and fracture system, data from borehole logs, packer tests, optical...... distribution in the aquifer. Different models were used for the planning and interpretation of the pump and tracer test. The models were evaluated by examining their ability to describe collected field data. The comparison with data showed that the models have substantially different representations...

  10. Detecting Volcanic Ash Plumes with GNSS Signals

    Science.gov (United States)

    Rainville, N.; Larson, K. M.; Palo, S. E.; Mattia, M.; Rossi, M.; Coltelli, M.; Roesler, C.; Fee, D.

    2016-12-01

    Global Navigation Satellite Systems (GNSS) receivers are commonly placed near volcanic sites to measure ground deformation. In addition to the carrier phase data used to measure ground position, these receivers also record Signal to Noise ratio (SNR) data. Larson (2013) showed that attenuations in SNR data strongly correlate with ash emissions at a series of eruptions of Redoubt Volcano. This finding has been confirmed at eruptions for Tongariro, Mt Etna, Mt Shindake, and Sakurajima. In each of these detections, very expensive geodetic quality GNSS receivers were used. If low-cost GNSS instruments could be used instead, a networked array could be deployed and optimized for plume detection and tomography. The outputs of this sensor array could then be used by both local volcanic observatories and Volcano Ash Advisory Centers. Here we will describe progress in developing such an array. The sensors we are working with are intended for navigation use, and thus lack the supporting power and communications equipment necessary for a networked system. Reliably providing those features is major challenge for the overall sensor design. We have built prototypes of our Volcano Ash Plume Receiver (VAPR), with solar panels, lithium-ion batteries and onboard data storage for preliminary testing. We will present results of our field tests of both receivers and antennas. A second critical need for our array is a reliable detection algorithm. We have tested our algorithm on data from recent eruptions and have incorporated the noise characteristics of the low-cost GNSS receiver. We have also developed a simulation capability so that the receivers can be deployed to optimize vent crossing GNSS signals.

  11. Learning to Rapidly Re-Contact the Lost Plume in Chemical Plume Tracing

    Directory of Open Access Journals (Sweden)

    Meng-Li Cao

    2015-03-01

    Full Text Available Maintaining contact between the robot and plume is significant in chemical plume tracing (CPT. In the time immediately following the loss of chemical detection during the process of CPT, Track-Out activities bias the robot heading relative to the upwind direction, expecting to rapidly re-contact the plume. To determine the bias angle used in the Track-Out activity, we propose an online instance-based reinforcement learning method, namely virtual trail following (VTF. In VTF, action-value is generalized from recently stored instances of successful Track-Out activities. We also propose a collaborative VTF (cVTF method, in which multiple robots store their own instances, and learn from the stored instances, in the same database. The proposed VTF and cVTF methods are compared with biased upwind surge (BUS method, in which all Track-Out activities utilize an offline optimized universal bias angle, in an indoor environment with three different airflow fields. With respect to our experimental conditions, VTF and cVTF show stronger adaptability to different airflow environments than BUS, and furthermore, cVTF yields higher success rates and time-efficiencies than VTF.

  12. Numerical simulation of transient flow in horizontal drainage systems

    Institute of Scientific and Technical Information of China (English)

    Ze-yu MAO; Han XIAO; Ying LIU; Ying-jun HU

    2009-01-01

    A numerical simulation model based on the characteristic-based finite-difference method with a time-line interpolation scheme was developed for predicting transient free surface flow in horizontal drainage systems. The fundamental accuracy of the numerical model was first clarified by comparison with the experimental results for a single drainage pipe. Boundary conditions for junctions and bends, which are often encountered in drainage systems, were studied both experimentally and numerically. The numerical model was applied to an actual drainage system. Comparison with a full-scale model experiment indicates that the model can be used to accurately predict flow characteristics in actual drainage networks.

  13. Thermokarst lakes, drainage, and drained basins

    Science.gov (United States)

    Grosse, G.; Jones, B.; Arp, C.; Shroder, John F.

    2013-01-01

    Thermokarst lakes and drained lake basins are widespread in Arctic and sub-Arctic permafrost lowlands with ice-rich sediments. Thermokarst lake formation is a dominant mode of permafrost degradation and is linked to surface disturbance, subsequent melting of ground ice, surface subsidence, water impoundment, and positive feedbacks between lake growth and permafrost thaw, whereas lake drainage generally results in local permafrost aggradation. Thermokarst lakes characteristically have unique limnological, morphological, and biogeochemical characteristics that are closely tied to cold-climate conditions and permafrost properties. Thermokarst lakes also have a tendency toward complete or partial drainage through permafrost degradation and erosion. Thermokarst lake dynamics strongly affect the development of landscape geomorphology, hydrology, and the habitat characteristic of permafrost lowlands.

  14. Autogenic drainage: efficacy of a simplified method.

    Science.gov (United States)

    Lindemann, H; Boldt, A; Kieselmann, R

    1990-01-01

    A simplified and modified technique of the original autogenic drainage (AD) is described which is supplemented by breathing against an external flow resistance. The new method allows a better teaching and learning. It's efficacy is proven by means of a comparative trial of AD and PEP physiotherapy (i.e. expiration against a defined stenosis). The autogenic drainage (AD) was introduced by a Belgian working group (2). The basic idea was to support the elimination of mucus by deep breathing and by repressing the cough as long as possible. However, a rather sophisticated method impeded teaching and learning of AD (1). Thus, till now, there are only preliminary results which suggest the efficacy of AD (e.g. 3). Therefore, a simplified technique was developed and examined with regard to its sputum eliminating effect.

  15. Range of drainage effect of surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Sozanski, J.

    1978-03-01

    This paper discusses methods of calculating the range of effects of water drainage from surface coal mines and other surface mines. It is suggested that methods based on test pumping (water drainage) are time consuming, and the results can be distorted by atmospheric factors such as rain fall or dry period. So-called empirical formulae produce results which are often incorrect. The size of a cone shaped depression calculated on the basis of empirical formulae can be ten times smaller than the size of the real depression. It is suggested that using a formula based on the Dupuit formula is superior to other methods of depression calculation. According to the derived formulae the radius of the depresion cone is a function of parameters of the water bearing horizons, size of surface mine working and of water depression. The proposed formula also takes into account the influence of atmospheric factors (water influx caused by precipitation, etc.). (1 ref.) (In Polish)

  16. Urban drainage models - making uncertainty analysis simple

    DEFF Research Database (Denmark)

    Vezzaro, Luca; Mikkelsen, Peter Steen; Deletic, Ana;

    2012-01-01

    There is increasing awareness about uncertainties in modelling of urban drainage systems and, as such, many new methods for uncertainty analyses have been developed. Despite this, all available methods have limitations which restrict their widespread application among practitioners. Here, a modif...... probability distributions (often used for sensitivity analyses) and prediction intervals. To demonstrate the new method, it is applied to a conceptual rainfall-runoff model using a dataset collected from Melbourne, Australia....

  17. Streaming potential during drainage and imbibition

    Science.gov (United States)

    Zhang, Jiazuo; Vinogradov, Jan; Leinov, Eli; Jackson, M. D.

    2017-06-01

    The rock pore space in many subsurface settings is saturated with water and one or more immiscible fluid phases. Examples include nonaqueous phase liquids (NAPLs) in contaminated aquifers, supercritical CO2 during sequestration in deep saline aquifers, the vadose zone, and hydrocarbon reservoirs. Self-potential (SP) and seismoelectric (SE) methods have been proposed to monitor multiphase flow in such settings. However, to properly interpret and model these data requires an understanding of the saturation dependence of the streaming potential. This paper presents a methodology to determine the saturation dependence of the streaming potential coupling coefficient (C) and streaming current charge density (Qs) in unsteady state drainage and imbibition experiments and applies the method to published experimental data. Unsteady state experiments do not yield representative values of C and Qs (or other transport properties such as relative permeability and electrical conductivity) at partial saturation (Sw) because Sw within the sample is not uniform. An interpretation method is required to determine the saturation dependence of C and Qs within a representative elementary volume with uniform saturation. The proposed method makes no assumptions about the pore space geometry. Application of the method to published experimental data from two natural sandstone samples shows that C exhibits hysteresis between drainage and imbibition, can exhibit significant nonmonotonic variations with saturation, is nonzero at the irreducible water saturation, and can exceed the value observed at Sw = 1. Moreover, Qs increases with decreasing Sw but is not given by 1/Sw as is often assumed. The variation in Qs with Sw is very similar for a given sample and a given drainage or imbibition process, and the difference between samples is less than the difference between drainage and imbibition. The results presented here can be used to help interpret SP and SE measurements obtained in partially

  18. Factors influencing pleural drainage in parapneumonic effusions.

    Science.gov (United States)

    Porcel, J M; Valencia, H; Bielsa, S

    2016-10-01

    The identification of parapneumonic effusions (PPE) requiring pleural drainage is challenging. We aimed to determine the diagnostic accuracy of radiological and pleural fluid findings in discriminating between PPE that need drainage (complicated PPE (CPPE)) and those that could be resolved with antibiotics only (uncomplicated PPE (UPPE)). A retrospective review of 641 consecutive PPE, of which 393 were categorized as CPPE and 248 as UPPE. Demographics, radiological (size and laterality on a chest radiograph) and pleural fluid parameters (pus, bacterial cultures, biochemistries) were compared among groups. Logistic regression was performed to determine variables useful for predicting chest drainage, and receiver-operating characteristic curves assisted in the selection of the best cutoff values. According to the likelihood ratios (LR), findings increasing the probability of chest tube usage the most were: effusions occupying ≥1/2 of the hemithorax (LR 13.5), pleural fluid pH ≤7.15 (LR 6.2), pleural fluid glucose ≤40mg/dL (LR 5.6), pus (LR 4.8), positive pleural fluid cultures (LR 3.6), and pleural fluid lactate dehydrogenase >2000U/L (LR 3.4). In the logistic regression analysis only the first two were selected as significant predictors of CPPE. In non-purulent effusions, the effusion's size and pleural fluid pH retained their discriminatory properties, in addition to a pleural fluid C-reactive protein (CRP) level >100mg/L. Large radiological effusions and a pleural fluid pH ≤7.15 were the best predictors for chest drainage in patients with PPE. In the subgroup of patients with non-purulent effusions, pleural fluid CRP also contributed to CPPE identification. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Medicina Interna (SEMI). All rights reserved.

  19. Spatially averaging cross-wind sensors and numerical-model results for nocturnal drainage winds in complex terrain

    Energy Technology Data Exchange (ETDEWEB)

    Porch, W.M.; Lange, R.

    1982-11-01

    Recent studies in The Geysers region of Northern California have concentrated on drainage wind effects on tracer transport and diffusion in complex terrain, as part of the Atmospheric Studies in Complex Terrain (ASCOT) project. These studies combined tracer measurements, conventional tower and remote sensing meteorological measurements, and numerical wind field transport and diffusion models. One part of the meteorological measurement support used eight optical cross-path wind sensors across the principle air drainage valleys. These sensors had varying optical path lengths within the drainage layer of approx. 300 m to 3 km. Results of this study indicate that the combination of spatially averaged cross-path optical wind sensor and conventional tower mounted cup-vane anemometer data into a numerical plume transport and diffusion model for complex terrain has provided useful results. The most important of these results is an independent measure of wind data on a spatial scale compatible with necessarily large grid scales in numerical wind field models with topography. This allows assessment of terrain associated exposure problems for tower anemometers in complex terrain. The optical cross wind data can be used to compare necessary averaging times, and spatial distribution of point sensors and provide verification data to improve the logistics of instrument placement in combination with numerical models.

  20. NW Iberia Shelf Dynamics. Study of the Douro River Plume.

    Directory of Open Access Journals (Sweden)

    Isabel Iglesias

    2014-06-01

    Full Text Available River plumes are one of the most important mechanisms that transport the terrestrial materials to the coast and the ocean. Some examples of those materials are pollutants, essential nutrients, which enhance the phytoplankton productivity or sediments, which settle on the seabed producing modifications on the bathymetry affecting the navigation channels. The mixing between the riverine and the oceanic waters can induce instabilities, which might generate bulges, filaments, and buoyant currents over the continental shelf. Offshore, the buoyant riverine water could form a front with the oceanic waters often related with the occurrence of current-jets, eddies and strong mixing. The study and modelling of the river plumes is a key factor for the complete understanding of sediment transport mechanisms and patterns, and of coastal physics and dynamic processes. On this study the Douro River plume will be simulated. The Douro River is located on the north-west Iberian coast and its daily averaged freshwater discharge can range values from 0 to 13000 m3/s. This variability impacts the formation of the river plumes and its dispersion along the continental shelf. This study builds on the long-term objective of generate a Douro River plume forecasting system as part of the RAIA and RAIA.co projects. Satellite imagery was analyzed showing that the river Douro is one of the main sources of suspended particles, dissolved material and chlorophyll in the NW Iberian Shelf. The Regional Oceanic Modeling System (ROMS model was selected to reproduce scenarios of plume generation, retention and dispersion. Whit this model, three types of simulations were performed: (i schematic winds simulations with prescribed river flow, wind speed and direction; (ii multi-year climatological simulation, with river flow and temperature change for each month; (iii extreme case simulation, based on the Entre-os-Rios accident situation. The schematic wind case-studies suggest that the

  1. Natural versus forced convection in laminar starting plumes

    CERN Document Server

    Rogers, Michael C

    2009-01-01

    A starting plume or jet has a well-defined, evolving head that is driven through the surrounding quiescent fluid by a localized flux of either buoyancy or momentum, or both. We studied the scaling and morphology of starting plumes produced by a constant flux of buoyant fluid from a small, submerged outlet. The plumes were laminar and spanned a wide range of plume Richardson numbers Ri. Ri is the dimensionless ratio of the buoyancy forces to inertial effects, and is thus our measurements crossed over the transition between buoyancy-driven plumes and momentum-driven jets. We found that the ascent velocity of the plume, nondimensionalized by Ri, exhibits a power law relationship with Re, the Reynolds number of the injected fluid in the outlet pipe. We also found that as the threshold between buoyancy-driven and momentum-driven flow was crossed, two distinct types of plume head mophologies existed: confined heads, produced in the Ri > 1 regime, and dispersed heads, which are found in the Ri < 1 regime. Head di...

  2. Biogeochemistry and isotope geochemistry of a landfill leachate plume.

    Science.gov (United States)

    van Breukelen, Boris M; Röling, Wilfred F M; Groen, Jacobus; Griffioen, Jasper; van Verseveld, Henk W

    2003-09-01

    The biogeochemical processes were identified which improved the leachate composition in the flow direction of a landfill leachate plume (Banisveld, The Netherlands). Groundwater observation wells were placed at specific locations after delineating the leachate plume using geophysical tests to map subsurface conductivity. Redox processes were determined using the distribution of solid and soluble redox species, hydrogen concentrations, concentration of dissolved gases (N(2), Ar, and CH(4)), and stable isotopes (delta15N-NO(3), delta34S-SO(4), delta13C-CH(4), delta2H-CH(4), and delta13C of dissolved organic and inorganic carbon (DOC and DIC, respectively)). The combined application of these techniques improved the redox interpretation considerably. Dissolved organic carbon (DOC) decreased downstream in association with increasing delta13C-DOC values confirming the occurrence of degradation. Degradation of DOC was coupled to iron reduction inside the plume, while denitrification could be an important redox process at the top fringe of the plume. Stable carbon and hydrogen isotope signatures of methane indicated that methane was formed inside the landfill and not in the plume. Total gas pressure exceeded hydrostatic pressure in the plume, and methane seems subject to degassing. Quantitative proof for DOC degradation under iron-reducing conditions could only be obtained if the geochemical processes cation exchange and precipitation of carbonate minerals (siderite and calcite) were considered and incorporated in an inverse geochemical model of the plume. Simulation of delta13C-DIC confirmed that precipitation of carbonate minerals happened.

  3. U. S. Air Force approach to plume contamination

    Science.gov (United States)

    Furstenau, Ronald P.; McCay, T. Dwayne; Mann, David M.

    1980-08-01

    Exhaust products from rocket engine firings can produce undesirable effects on sensitive satellite surfaces, such as optical systems, solar cells, and thermal control surfaces. The Air Force has an objective of minimizing the effect of rocket plume contamination on space-craft mission effectiveness. Plume contamination can result from solid rocket motors, liquid propellant engines, and electric thrusters. To solve the plume contamination problem, the Air Force Rocket Propulsion Laboratory (AFRPL) has developed a plume contamination computer model which predicts the production, transport, and deposition of rocket exhaust products. In addition, an experimental data base is being obtained through ground-based vacuum chamber experiments and in-flight measurements with which to compare the analytical results. Finally, the experimental data is being used to verify and improve the analytical model. The plume contamination model, known as CONTAM, has been used to make contamination predictions for various engines. The experimental programs have yielded quantitative data, such as species concentrations and temperatures, in all regions of the plume. The result of the modelling and experimental programs will ultimately be computer models which can be used by the satellite designer to analyze and to minimize the effect plume contamination will have on a particular spacecraft system.

  4. Monitoring radioactive plumes by airborne gamma-ray spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Grasty, R.L. [Exploranium, Mississauga, Ontario (Canada); Hovgaard, J. [Danish Emergency Management Agency, Birkerod (Germany); Multala, J. [Geological Survey of Finland, Espoo (Finland)

    1996-06-01

    Airborne gamma-ray spectrometer surveys using large volume sodium-iodide detectors are routinely flown throughout the world for mineral exploration and geological mapping. Techniques have now been developed to detect and map man-made sources of radiation. In Canada, airborne gamma-rays surveys have been flown around nuclear reactors to map {sup 41}Ar plumes from nuclear reactors and to calculate the dose rate at ground level. In May 1986, the Finnish Geological survey aircraft flew through a radioactive plume from the Chernobyl nuclear accident. As the aircraft flew through the plume, the aircraft became increasingly contaminated. By measuring the final aircraft contamination, the activity of the plume could be separated from the contamination due to the aircraft. Within 1 h of encountering the plume, the aircraft activity was comparable to the maximum levels found in the plume. From an analysis of the gamma-ray spectra, the concentration of {sup 131}I and {sup 140}La within the plume were calculated as a function of time.

  5. Cooling tower and plume modeling for satellite remote sensing applications

    Energy Technology Data Exchange (ETDEWEB)

    Powers, B.J.

    1995-05-01

    It is often useful in nonproliferation studies to be able to remotely estimate the power generated by a power plant. Such information is indirectly available through an examination of the power dissipated by the plant. Power dissipation is generally accomplished either by transferring the excess heat generated into the atmosphere or into bodies of water. It is the former method with which we are exclusively concerned in this report. We discuss in this report the difficulties associated with such a task. In particular, we primarily address the remote detection of the temperature associated with the condensed water plume emitted from the cooling tower. We find that the effective emissivity of the plume is of fundamental importance for this task. Having examined the dependence of the plume emissivity in several IR bands and with varying liquid water content and droplet size distributions, we conclude that the plume emissivity, and consequently the plume brightness temperature, is dependent upon not only the liquid water content and band, but also upon the droplet size distribution. Finally, we discuss models dependent upon a detailed point-by-point description of the hydrodynamics and thermodynamics of the plume dynamics and those based upon spatially integrated models. We describe in detail a new integral model, the LANL Plume Model, which accounts for the evolution of the droplet size distribution. Some typical results obtained from this model are discussed.

  6. Drainage and Stratification Kinetics of Foam Films

    Science.gov (United States)

    Zhang, Yiran; Sharma, Vivek

    2014-03-01

    Baking bread, brewing cappuccino, pouring beer, washing dishes, shaving, shampooing, whipping eggs and blowing bubbles all involve creation of aqueous foam films. Foam lifetime, drainage kinetics and stability are strongly influenced by surfactant type (ionic vs non-ionic), and added proteins, particles or polymers modify typical responses. The rate at which fluid drains out from a foam film, i.e. drainage kinetics, is determined in the last stages primarily by molecular interactions and capillarity. Interestingly, for certain low molecular weight surfactants, colloids and polyelectrolyte-surfactant mixtures, a layered ordering of molecules, micelles or particles inside the foam films leads to a stepwise thinning phenomena called stratification. Though stratification is observed in many confined systems including foam films containing particles or polyelectrolytes, films containing globular proteins seem not to show this behavior. Using a Scheludko-type cell, we experimentally study the drainage and stratification kinetics of horizontal foam films formed by protein-surfactant mixtures, and carefully determine how the presence of proteins influences the hydrodynamics and thermodynamics of foam films.

  7. Drawdown behavior of gravity drainage wells

    Energy Technology Data Exchange (ETDEWEB)

    Aasen, J.A.; Ramey, H.J. Jr.

    1993-10-01

    An analytical solution for drawdown in gravity drainage wells is developed. The free-surface flow is viewed as incompressible, and anisotropy effects are included. The well is a line source well, and the reservoir is infinitely large. The model is valid for small drawdowns. The uniform wellbore potential inner boundary condition is modelled using the proper Green`s function. The discontinuity at the wellbore is solved by introducing a finite skin radius, and the formulation produces a seepage face. The calculated wellbore flux distribution and wellbore pressures are in fair agreement with results obtained using a numerical gravity drainage simulator. Three distinct flow periods are observed. The wellbore storage period is caused by the moving liquid level, and the duration is short. During the long intermediate flow period, the wellbore pressure is nearly constant. In this period the free surface moves downwards, and the liquid is produced mainly by vertical drainage. At long times the semilog straight line appears. The confined liquid solutions by Theis (1935) and van Everdingen and Hurst (1949) may be used during the pseudoradial flow period if the flowrate is low. New type curves are presented that yield both vertical and horizontal permeabilities.

  8. Treatment of severe acute pancreatitis through retroperitoneal laparoscopic drainage

    Institute of Scientific and Technical Information of China (English)

    Chun Tang; Baolin Wang; Bing Xie; Hongming Liu; Ping Chen

    2011-01-01

    A treatment method based on drainage via retroperitoneal laparoscopy was adopted for 15 severe acute pancreatitis (SAP) patients to investigate the feasibility of the method.Ten patients received only drainage via retroperitoneai laparoscopy,four patients received drainage via both retroperitoneal and preperitoneal laparoscopy,and one patient received drainage via conversion to laparotomy.Thirteen patients exhibited a good drainage effect and were successfully cured without any other surgical treatment.Two patients had encapsulated effusions or pancreatic pseudocysts after surgery,but were successfully cured after lavage and B ultrasound-guided percutaneous catheter drainage.SAP treatment via retroperitoneal laparoscopic drainage is an effective surgical method,resulting in minor injury.

  9. 3-D numerical modeling of plume-induced subduction initiation

    Science.gov (United States)

    Baes, Marzieh; Gerya, taras; Sobolev, Stephan

    2016-04-01

    Investigation of mechanisms involved in formation of a new subduction zone can help us to better understand plate tectonics. Despite numerous previous studies, it is still unclear how and where an old oceanic plate starts to subduct beneath the other plate. One of the proposed scenarios for nucleation of subduction is plume-induced subduction initiation, which was investigated in detail, using 2-D models, by Ueda et al. (2008). Recently. Gerya et al. (2015), using 3D numerical models, proposed that plume-lithosphere interaction in the Archean led to the subduction initiation and onset of plate tectonic. In this study, we aim to pursue work of Ueda et al. (2008) by incorporation of 3-D thermo-mechanical models to investigate conditions leading to oceanic subduction initiation as a result of thermal-chemical mantle plume-lithosphere interaction in the modern earth. Results of our experiments show four different deformation regimes in response to plume-lithosphere interaction, that are a) self-sustaining subduction initiation where subduction becomes self-sustained, b) freezing subduction initiation where subduction stops at shallow depths, c) slab break-off where subducting circular slab breaks off soon after formation and d) plume underplating where plume does not pass through the lithosphere but spreads beneath it (failed subduction initiation). These different regimes depend on several parameters such as plume's size, composition and temperature, lithospheric brittle/plastic strength, age of the oceanic lithosphere and presence/absence of lithospheric heterogeneities. Results show that subduction initiates and becomes self-sustained when lithosphere is older than 10 Myr and non-dimensional ratio of the plume buoyancy force and lithospheric strength above the plume is higher than 2.

  10. Preoperative biliary drainage for periampullary tumors causing obstructive jaundice; DRainage vs. (direct OPeration (DROP-trial

    Directory of Open Access Journals (Sweden)

    Sosef Meindert N

    2007-03-01

    Full Text Available Abstract Background Surgery in patients with obstructive jaundice caused by a periampullary (pancreas, papilla, distal bile duct tumor is associated with a higher risk of postoperative complications than in non-jaundiced patients. Preoperative biliary drainage was introduced in an attempt to improve the general condition and thus reduce postoperative morbidity and mortality. Early studies showed a reduction in morbidity. However, more recently the focus has shifted towards the negative effects of drainage, such as an increase of infectious complications. Whether biliary drainage should always be performed in jaundiced patients remains controversial. The randomized controlled multicenter DROP-trial (DRainage vs. Operation was conceived to compare the outcome of a 'preoperative biliary drainage strategy' (standard strategy with that of an 'early-surgery' strategy, with respect to the incidence of severe complications (primary-outcome measure, hospital stay, number of invasive diagnostic tests, costs, and quality of life. Methods/design Patients with obstructive jaundice due to a periampullary tumor, eligible for exploration after staging with CT scan, and scheduled to undergo a "curative" resection, will be randomized to either "early surgical treatment" (within one week or "preoperative biliary drainage" (for 4 weeks and subsequent surgical treatment (standard treatment. Primary outcome measure is the percentage of severe complications up to 90 days after surgery. The sample size calculation is based on the equivalence design for the primary outcome measure. If equivalence is found, the comparison of the secondary outcomes will be essential in selecting the preferred strategy. Based on a 40% complication rate for early surgical treatment and 48% for preoperative drainage, equivalence is taken to be demonstrated if the percentage of severe complications with early surgical treatment is not more than 10% higher compared to standard treatment

  11. Closed suction drainage versus closed simple drainage in the management of modified radical mastectomy wounds.

    Science.gov (United States)

    Ezeome, E R; Adebamowo, C A

    2008-09-01

    To compare the outcomes of modified radical mastectomy wounds managed by closed wound drainage with suction and without suction. A prospective randomised trial was conducted at the University College Hospital in Ibadan, and the University of Nigeria Teaching Hospital in Enugu. Fifty women who required modified radical mastectomy for breast cancer were randomised to have closed wound drainage with suction (26 patients) and closed wound drainage without suction (24 patients). There was no significant difference in the intraoperative and postoperative variables. Suction drainage drained less volume of fluid and stayed for a shorter time in the wound, but the differences were not significant. There was no difference in the length of hospital stay, time to stitch removal, and number of dressing changes. More haematomas and wound infections occurred in the simple drain group while more seromas occurred in the suction drain group, but these were not significant. The suction drain was more difficult to manage and the cost was 15 times higher than the simple drainage system. Closed simple drains are not inferior to suction drains in mastectomy wounds and, considering the cost saving and simplicity of postoperative care, they are preferable to suction drains.

  12. Multiphase CFD modeling of nearfield fate of sediment plumes

    DEFF Research Database (Denmark)

    Saremi, Sina; Hjelmager Jensen, Jacob

    2014-01-01

    Disposal of dredged material and the overflow discharge during the dredging activities is a matter of concern due to the potential risks imposed by the plumes on surrounding marine environment. This gives rise to accurately prediction of the fate of the sediment plumes released in ambient waters....... The two-phase mixture solution based on the drift-flux method is evaluated for 3D simulation of material disposal and overflow discharge from the hoppers. The model takes into account the hindrance and resistance mechanisms in the mixture and is capable of describing the flow details within the plumes...... and gives excellent results when compared to experimental data....

  13. Airborne Gamma-ray Measurements in the Chernobyl Plume

    DEFF Research Database (Denmark)

    Grasty, R. L.; Hovgaard, Jens; Multala, J.

    1997-01-01

    On 29 April 1986, the Geological Survey of Finland (GSF) survey aircraft with a gamma ray spectrometer flew through a radioactive plume from the Chernobyl nuclear accident. The aircraft became contaminated and the gamma spectrometer measured radioactivity in the plume as well as radioactivity...... on the aircraft. By using simple assumptions on the build-up of contamination it has been possible to separate the signals from contamination and from plume. The analysis further showed that even a detector/spectrometer with low energy resolution is able to identify a contamination with iodine....

  14. Standoff midwave infrared hyperspectral imaging of ship plumes

    Science.gov (United States)

    Gagnon, Marc-André; Gagnon, Jean-Philippe; Tremblay, Pierre; Savary, Simon; Farley, Vincent; Guyot, Éric; Lagueux, Philippe; Chamberland, Martin; Marcotte, Frédérick

    2016-05-01

    Characterization of ship plumes is very challenging due to the great variety of ships, fuel, and fuel grades, as well as the extent of a gas plume. In this work, imaging of ship plumes from an operating ferry boat was carried out using standoff midwave (3-5 μm) infrared hyperspectral imaging. Quantitative chemical imaging of combustion gases was achieved by fitting a radiative transfer model. Combustion efficiency maps and mass flow rates are presented for carbon monoxide (CO) and carbon dioxide (CO2). The results illustrate how valuable information about the combustion process of a ship engine can be successfully obtained using passive hyperspectral remote sensing imaging.

  15. Laboratory Study of Dispersion of Buoyant Surface Plumes

    DEFF Research Database (Denmark)

    Petersen, Ole; Larsen, Torben

    1990-01-01

    A laboratory a study on surface dispersion of buoyant plumes in open channel turbulence in made, where the buoyancy is due to both salinity and heat. The measured parameters are the downstream derivative of a plume width and height, which are integral-characteristics of the distributions of density......-differences. Other methods as infra-red sensing are used for visualizing purpose. The results are used to calibrate an integral model of the dispersion. Conclusions are that the dispersion of a buoyant surface plume can be treated the superposition of a buoyancy induced stretching and turbulent diffusion, reduced...

  16. Lightning in Colorado forest fire smoke plumes during summer 2012

    Science.gov (United States)

    Lang, T. J.; Krehbiel, P. R.; Dolan, B.; Lindsey, D.; Rutledge, S. A.; Rison, W.

    2012-12-01

    May and June 2012 were unusually hot and dry in Colorado, which was suffering from a strong drought. A major consequence of this climatic regime was one of the most destructive forest fire seasons in state history, with hundreds of thousands of acres of forest and grassland consumed by flames, hundreds of homes burned, and several lives lost. Many of these fires occurred within range of the newly installed Colorado Lightning Mapping Array (COLMA), which provides high-resolution observations of discharges over a large portion of the state. The COLMA was installed in advance of the Deep Convective Clouds and Chemistry (DC3) project. High-altitude lightning was observed to occur sporadically in the smoke plumes over three major fires that occurred during early summer: Hewlett Gulch, High Park, and Waldo Canyon. Additionally, the Colorado State University CHILL (CSU-CHILL) and Pawnee radars observed the Hewlett Gulch plume electrify with detailed polarimetric and dual-Doppler measurements, and also provided these same measurements for the High Park plume when it was not producing lightning. Meanwhile, local Next Generation Radars (NEXRADs) provided observations of the electrified High Park and Waldo Canyon plumes. All of these plumes also were observed by geostationary meteorological satellites. These observations provide an unprecedented dataset with which to study smoke plume and pyrocumulus electrification. The polarimetric data - low reflectivity, high differential reflectivity, low correlation coefficient, and noisy differential phase - were consistent with the smoke plumes and associated pyrocumulus being filled primarily with irregularly shaped ash particles. Lightning was not observed in the plumes until they reached over 10 km above mean sea level, which was an uncommon occurrence requiring explosive fire growth combined with increased meteorological instability and reduced wind shear. Plume updraft intensification and echo-top growth led the occurrence of

  17. Rocket Plume Scaling for Orion Wind Tunnel Testing

    Science.gov (United States)

    Brauckmann, Gregory J.; Greathouse, James S.; White, Molly E.

    2011-01-01

    A wind tunnel test program was undertaken to assess the jet interaction effects caused by the various solid rocket motors used on the Orion Launch Abort Vehicle (LAV). These interactions of the external flowfield and the various rocket plumes can cause localized aerodynamic disturbances yielding significant and highly non-linear control amplifications and attenuations. This paper discusses the scaling methodologies used to model the flight plumes in the wind tunnel using cold air as the simulant gas. Comparisons of predicted flight, predicted wind tunnel, and measured wind tunnel forces-and-moments and plume flowfields are made to assess the effectiveness of the selected scaling methodologies.

  18. Fluoroscopy guided percutaneous catheter drainage of pneumothorax in good mid-term patency with tube drainage

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ga Young; Oh, Joo Hyung; Yoon, Yup; Sung, Dong Wook [Kyung Hee University Hospital, Seoul (Korea, Republic of)

    1995-10-15

    To evaluate efficacy and the safety of percutaneous catheter drainage in patients with pneumothorax that is difficult to treat with closed thoracotomy. We retrospectively reviewed effectiveness of percutaneous catheter drainage (PCD) in 10 patients with pneumothorax. The catheter was inserted under fluoroscopic guidance. Seven patients had spontaneous pneumothorax caused by tuberculosis (n =4), reptured bullae (n = 2), and histiocytosis-X (n = 1). Three patients had iatrogenic pneumothorax caused by trauma (n = 1) and surgery (n = 2). All procedures were performed by modified Seldinger's method by using 8F-20F catheter. All catheter were inserted successfully. In 9 of 10 patients, the procedure was curative without further therapy. Duration of catheter insertion ranged from 1 day to 26 days. In the remaining 1 patient in whom multiple pneumothorax occurred after operation, catheter insertion was performed twice. Percutaneous catheter drainage under fluoroscopic guidance is effective and safe procedure for treatment of pneumothorax in patients with failed closed thoracotomy.

  19. Eastern Dharwar Craton, India: Continental lithosphere growth by accretion of diverse plume and arc terranes

    Directory of Open Access Journals (Sweden)

    C. Manikyamba

    2012-05-01

    Archean lithospheric mantle, distinctive in being thick, refractory, and buoyant, formed complementary to the accreted plume and convergent margin terranes, as migrating arcs captured thick plume-plateaus, and the refractory, low density, residue of plume melting coupled with accreted imbricated plume-arc crust.

  20. Linking Europa's plume activity to tides, tectonics, and liquid water

    CERN Document Server

    Rhoden, Alyssa R; Roth, Lorenz; Retherford, Kurt

    2015-01-01

    Much of the geologic activity preserved on Europa's icy surface has been attributed to tidal deformation, mainly due to Europa's eccentric orbit. Although the surface is geologically young (30 - 80 Myr), there is little information as to whether tidally-driven surface processes are ongoing. However, a recent detection of water vapor near Europa's south pole suggests that it may be geologically active. Initial observations indicated that Europa's plume eruptions are time-variable and may be linked to its tidal cycle. Saturn's moon, Enceladus, which shares many similar traits with Europa, displays tidally-modulated plume eruptions, which bolstered this interpretation. However, additional observations of Europa at the same time in its orbit failed to yield a plume detection, casting doubt on the tidal control hypothesis. The purpose of this study is to analyze the timing of plume eruptions within the context of Europa's tidal cycle to determine whether such a link exists and examine the inferred similarities and...

  1. Saturated Zone Plumes in Volcanic Rock: Implications for Yucca Mountain

    Energy Technology Data Exchange (ETDEWEB)

    S. Kelkar; R. Roback; B. Robinson; G. Srinivasan; C. Jones; P. Reimus

    2006-02-14

    This paper presents a literature survey of the occurrences of radionuclide plumes in saturated, fractured rocks. Three sites, Idaho National laboratory, Hanford, and Oak Ridge are discussed in detail. Results of a modeling study are also presented showing that the length to width ratio of a plume starting within the repository footprint at the Yucca Mountain Project site, decreases from about 20:1 for the base case to about 4:1 for a higher value of transverse dispersivity, indicating enhanced lateral spreading of the plume. Due to the definition of regulatory requirements, this lateral spreading does not directly impact breakthrough curves at the 18 km compliance boundary, however it increases the potential that a plume will encounter reducing conditions, thus significantly retarding the transport of sorbing radionuclides.

  2. Effects of rotation on turbulent buoyant plumes in stratified environments

    National Research Council Canada - National Science Library

    Fabregat Tomàs, Alexandre; Poje, Andrew C; Özgökmen, Tamay M; Dewar, William K

    2016-01-01

    We numerically investigate the effects of rotation on the turbulent dynamics of thermally driven buoyant plumes in stratified environments at the large Rossby numbers characteristic of deep oceanic releases...

  3. False alarm recognition in hyperspectral gas plume identification

    Science.gov (United States)

    Conger, James L [San Ramon, CA; Lawson, Janice K [Tracy, CA; Aimonetti, William D [Livermore, CA

    2011-03-29

    According to one embodiment, a method for analyzing hyperspectral data includes collecting first hyperspectral data of a scene using a hyperspectral imager during a no-gas period and analyzing the first hyperspectral data using one or more gas plume detection logics. The gas plume detection logic is executed using a low detection threshold, and detects each occurrence of an observed hyperspectral signature. The method also includes generating a histogram for all occurrences of each observed hyperspectral signature which is detected using the gas plume detection logic, and determining a probability of false alarm (PFA) for all occurrences of each observed hyperspectral signature based on the histogram. Possibly at some other time, the method includes collecting second hyperspectral data, and analyzing the second hyperspectral data using the one or more gas plume detection logics and the PFA to determine if any gas is present. Other systems and methods are also included.

  4. A Thermal Plume Model for the Martian Convective Boundary Layer

    CERN Document Server

    Colaïtis, Arnaud; Hourdin, Frédéric; Rio, Catherine; Forget, François; Millour, Ehouarn

    2013-01-01

    The Martian Planetary Boundary Layer [PBL] is a crucial component of the Martian climate system. Global Climate Models [GCMs] and Mesoscale Models [MMs] lack the resolution to predict PBL mixing which is therefore parameterized. Here we propose to adapt the "thermal plume" model, recently developed for Earth climate modeling, to Martian GCMs, MMs, and single-column models. The aim of this physically-based parameterization is to represent the effect of organized turbulent structures (updrafts and downdrafts) on the daytime PBL transport, as it is resolved in Large-Eddy Simulations [LESs]. We find that the terrestrial thermal plume model needs to be modified to satisfyingly account for deep turbulent plumes found in the Martian convective PBL. Our Martian thermal plume model qualitatively and quantitatively reproduces the thermal structure of the daytime PBL on Mars: superadiabatic near-surface layer, mixing layer, and overshoot region at PBL top. This model is coupled to surface layer parameterizations taking ...

  5. Tracking hydrocarbon plume transport and biodegradation at Deepwater Horizon.

    Science.gov (United States)

    Camilli, Richard; Reddy, Christopher M; Yoerger, Dana R; Van Mooy, Benjamin A S; Jakuba, Michael V; Kinsey, James C; McIntyre, Cameron P; Sylva, Sean P; Maloney, James V

    2010-10-08

    The Deepwater Horizon blowout is the largest offshore oil spill in history. We present results from a subsurface hydrocarbon survey using an autonomous underwater vehicle and a ship-cabled sampler. Our findings indicate the presence of a continuous plume of oil, more than 35 kilometers in length, at approximately 1100 meters depth that persisted for months without substantial biodegradation. Samples collected from within the plume reveal monoaromatic petroleum hydrocarbon concentrations in excess of 50 micrograms per liter. These data indicate that monoaromatic input to this plume was at least 5500 kilograms per day, which is more than double the total source rate of all natural seeps of the monoaromatic petroleum hydrocarbons in the northern Gulf of Mexico. Dissolved oxygen concentrations suggest that microbial respiration rates within the plume were not appreciably more than 1 micromolar oxygen per day.

  6. False alarm recognition in hyperspectral gas plume identification

    Energy Technology Data Exchange (ETDEWEB)

    Conger, James L. (San Ramon, CA); Lawson, Janice K. (Tracy, CA); Aimonetti, William D. (Livermore, CA)

    2011-03-29

    According to one embodiment, a method for analyzing hyperspectral data includes collecting first hyperspectral data of a scene using a hyperspectral imager during a no-gas period and analyzing the first hyperspectral data using one or more gas plume detection logics. The gas plume detection logic is executed using a low detection threshold, and detects each occurrence of an observed hyperspectral signature. The method also includes generating a histogram for all occurrences of each observed hyperspectral signature which is detected using the gas plume detection logic, and determining a probability of false alarm (PFA) for all occurrences of each observed hyperspectral signature based on the histogram. Possibly at some other time, the method includes collecting second hyperspectral data, and analyzing the second hyperspectral data using the one or more gas plume detection logics and the PFA to determine if any gas is present. Other systems and methods are also included.

  7. Volcanic ash plume identification using polarization lidar: Augustine eruption, Alaska

    Science.gov (United States)

    Sassen, Kenneth; Zhu, Jiang; Webley, Peter W.; Dean, K.; Cobb, Patrick

    2007-01-01

    During mid January to early February 2006, a series of explosive eruptions occurred at the Augustine volcanic island off the southern coast of Alaska. By early February a plume of volcanic ash was transported northward into the interior of Alaska. Satellite imagery and Puff volcanic ash transport model predictions confirm that the aerosol plume passed over a polarization lidar (0.694 mm wavelength) site at the Arctic Facility for Atmospheric Remote Sensing at the University of Alaska Fairbanks. For the first time, lidar linear depolarization ratios of 0.10 – 0.15 were measured in a fresh tropospheric volcanic plume, demonstrating that the nonspherical glass and mineral particles typical of volcanic eruptions generate strong laser depolarization. Thus, polarization lidars can identify the volcanic ash plumes that pose a threat to jet air traffic from the ground, aircraft, or potentially from Earth orbit.

  8. Destratification induced by bubble plumes as a means to reduce ...

    African Journals Online (AJOL)

    to reduce evaporation from open impoundments. M van Dijk* and SJ van .... The air injection bubble plume system used for water quality applications has been ...... ervoir Evaporation Utilizing Mass Transfer Theory. US Geological. Survey.

  9. Hydrocarbon Rocket Engine Plume Imaging with Laser Induced Incandescence Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA/ Marshall Space Flight Center (MSFC) needs sensors that can be operated on rocket engine plume environments to improve NASA/SSC rocket engine performance. In...

  10. Vertically Discontinuous Seismic Signatures From Continuous Thermochemical Plumes

    Science.gov (United States)

    Harris, A. C.; Kincaid, C.; Savage, B.

    2008-12-01

    To interpret seismic signatures associated with mantle upwellings, we must understand the distribution of thermochemical heterogeneities within mantle plumes. Thermochemical heterogeneities are expected to arise within plumes by the incorporation of subducted lithosphere (Eclogite and Harzburgite) that has reached the plume source region (thermal boundary layers in the mantle). We analyze laboratory experiments in conjunction with seismic velocity models to predict the seismic signature of thermochemical plumes. Laboratory experiments are fully three-dimensional and use glucose syrup (Rayleigh number: 106) to model the mantle and a two-layer subducted lithosphere, where composition (viscosity and density) is controlled by water content. Experiments show heterogeneous upwellings with variations in both temperature and composition that are more complex than predicted in previous plume models. Spatial distributions for temperature and composition in representative, repeatable types of thermochemical upwellings are tracked through time, scaled to mantle values and used to calculate predicted seismic velocities. Apparent seismic velocity signals are estimated for patterns in thermochemical heterogeneity with length scales ranging from 1 to 300 km and excess temperatures from 50 to 300°C. Results show that if plumes are purely thermal they can be identified in the usual way, by slow velocities. However, if plumes are a mixture of compositions, as predicted by laboratory models, their velocity structure is more complex. An Ecolgite lens within a plume at ~300km depth with an excess temperature of 250°C can have the same velocity as regular mantle with no excess temperature. A Harzburgite lobe of a plume head (up to half of the plume volume) at 300km depth with an excess temperature of 225°C can have the same Vs as regular mantle with no excess temperature, but can only mask up to 55°C in Vp. Spatial variations in temperature control velocity structure above 300km

  11. Site characterization and petroleum hydrocarbon plume mapping

    Energy Technology Data Exchange (ETDEWEB)

    Ravishankar, K. [Harding Lawson Associates, Houston, TX (United States)

    1996-12-31

    This paper presents a case study of site characterization and hydrocarbon contamination plume mapping/delineation in a gas processing plant in southern Mexico. The paper describes innovative and cost-effective use of passive (non-intrusive) and active (intrusive) techniques, including the use of compound-specific analytical methods for site characterization. The techniques used, on a demonstrative basis, include geophysical, geochemical, and borehole drilling. Geochemical techniques used to delineate the horizontal extent of hydrocarbon contamination at the site include soil gas surveys. The borehole drilling technique used to assess the vertical extent of contamination and confirm geophysical and geochemical data combines conventional hollow-stem auguring with direct push-probe using Geoprobe. Compound-specific analytical methods, such as hydrocarbon fingerprinting and a modified method for gasoline range organics, demonstrate the inherent merit and need for such analyses to properly characterize a site, while revealing the limitations of noncompound-specific total petroleum hydrocarbon analysis. The results indicate that the techniques used in tandem can properly delineate the nature and extent of contamination at a site; often supplement or complement data, while reducing the risk of errors and omissions during the assessment phase; and provide data constructively to focus site-specific remediation efforts. 7 figs.

  12. Evolution of particle size in turbid discharge plumes

    Science.gov (United States)

    2016-06-07

    Evolution of particle size in turbid discharge plumes Paul S. Hill Department of Oceanography Dalhousie University Halifax, Nova Scotia, CANADA B3H...COVERED 00-00-1999 to 00-00-1999 4. TITLE AND SUBTITLE Evolution of particle size in turbid discharge plumes 5a. CONTRACT NUMBER 5b. GRANT...experiment was designed to explore the evolution of disaggregated grain size distribution in a flowing suspension. RESULTS Bulk effective settling

  13. The Communicating Pipe Model for Icy Plumes on Enceladus

    Institute of Scientific and Technical Information of China (English)

    MA Qian-Li; CHEN Chu-Xin

    2009-01-01

    We analyze the communicating pipe model on Enceladus, and predict that Saturn's strong tidal force in Enceladus plays a significant role in the plumes. In this model, the scale of the volcanoes can be evaluated based on the history of the craters and plumes. The correspondence of the data and observation make the model valid for the eruption. So it is imaginable that the tidal force is pulling the liquid out through the communicating pipe while reshaping the surface on Enceladus.

  14. Chemical Plume Detection with an Iterative Background Estimation Technique

    Science.gov (United States)

    2016-05-17

    this paper, we focus on cases where the plume is large (relative to the image ), and provide a method for handling this scenario. The method we develop...the locations of the events, the operation in (11) is a convolution of a binary image with a filter function h. To get an estimate of the probability...background statistics, including the mean and covariance. Diffuse plumes with a large spatial extent are particularly difficult to detect in single- image

  15. Mapping the Hawaiian plume conduit with converted seismic waves

    Science.gov (United States)

    Li; Kind; Priestley; Sobolev; Tilmann; Yuan; Weber

    2000-06-22

    The volcanic edifice of the Hawaiian islands and seamounts, as well as the surrounding area of shallow sea floor known as the Hawaiian swell, are believed to result from the passage of the oceanic lithosphere over a mantle hotspot. Although geochemical and gravity observations indicate the existence of a mantle thermal plume beneath Hawaii, no direct seismic evidence for such a plume in the upper mantle has yet been found. Here we present an analysis of compressional-to-shear (P-to-S) converted seismic phases, recorded on seismograph stations on the Hawaiian islands, that indicate a zone of very low shear-wave velocity (effects of the Hawaiian plume conduit in the asthenosphere and mantle transition zone with excess temperature of approximately 300 degrees C. Large variations in the transition-zone thickness suggest a lower-mantle origin of the Hawaiian plume similar to the Iceland plume, but our results indicate a 100 degrees C higher temperature for the Hawaiian plume.

  16. THE FLOW PATTERNS OF BUBBLE PLUME IN AN MBBR

    Institute of Scientific and Technical Information of China (English)

    LI Shi-rong; CHENG Wen; WANG Meng; CHEN Chen

    2011-01-01

    The flow patterns of the gas-liquid two-phase flow in a Moving-Bed Biofilm Reactor(MBBR)have a critical effect upon the mass transfer by the convection.Bubble plumes promote unsteadily fluctuating two-phase flows during the aeration.This article studies the unsteady structure of bubble plumes through experiments.The time-serial bubble plume images in various cases of the tank are analyzed.The Recursive Cross Correlation-Particle Image Velocimetry(RCC-PIV)is used to calculate the velocities in those cases,and then the time-serial vortex,the total turbulence intensity,the time-serial streamline are obtained.It is shown that the aspect ratio and the void fraction are the dominant factors influencing the unsteady structure of bubble plumes.When the aspect ratio is unity and the void fraction is high,the bubble plumes see a symmetrical vortex structure with a long residence time,which is beneficial for optimizing the aeration system and enhancing the applied range of bubble plumes.

  17. P- and S-wave delays caused by thermal plumes

    Science.gov (United States)

    Maguire, Ross; Ritsema, Jeroen; van Keken, Peter E.; Fichtner, Andreas; Goes, Saskia

    2016-08-01

    Many studies have sought to seismically image plumes rising from the deep mantle in order to settle the debate about their presence and role in mantle dynamics, yet the predicted seismic signature of realistic plumes remains poorly understood. By combining numerical simulations of flow, mineral-physics constraints on the relationships between thermal anomalies and wave speeds, and spectral-element method based computations of seismograms, we estimate the delay times of teleseismic S and P waves caused by thermal plumes. Wave front healing is incomplete for seismic periods ranging from 10 s (relevant in traveltime tomography) to 40 s (relevant in waveform tomography). We estimate P-wave delays to be immeasurably small (20 s), measurements of instantaneous phase misfit may be more useful in resolving narrow plume conduits. To detect S-wave delays of 0.4-0.8 s and the diagnostic frequency dependence imparted by plumes, it is key to minimize the influence of the heterogeneous crust and upper mantle. We argue that seismic imaging of plumes will advance significantly if data from wide-aperture ocean-bottom networks were available since, compared to continents, the oceanic crust and upper mantle are relatively simple.

  18. Plume aerodynamic effects of cushion engine in lunar landing

    Institute of Scientific and Technical Information of China (English)

    He Bijiao; He Xiaoying; Zhang Mingxing; Cai Guobiao

    2013-01-01

    During the second period of China “Tanyue” Project,the explorer will softland on the moon.The cushion engines are used to decelerate the explorer and reduce the impact on the lunar ground.It is necessary to study its plume effects on the explorer component.The self-developed PWS (Plume WorkStation) software based on direct simulation Monte Carlo (DSMC) method is used to simulate the plume effects of two 150 N engines.Due to the complex structure of the explorer,PWS uses a decoupling method to treat the boundary mesh,which mainly interacts with simulation particles,and has no relation with the computational grids.After the analytical expressions of plane surfaces and curved surfaces of each boundary block are given,the particle position within or without the boundary blocks can be easily determined.Finally the 3D plume field of two 150 N engines is simulated.The pressure,temperature and velocity distributions of plume field are clearly presented by three characteristic slices.The aerodynamic effects on the explorer bottom,the landfall legs and antenna are separately shown.The compression influence on the plume flow of four landfall legs can be observed.

  19. Growth and mixing dynamics of mantle wedge plumes

    Science.gov (United States)

    Gorczyk, Weronika; Gerya, Taras V.; Connolly, James A. D.; Yuen, David A.

    2007-07-01

    Recent work suggests that hydrated partially molten thermal-chemical plumes that originate from subducted slab as a consequence of Rayleigh-Taylor instability are responsible for the heterogeneous composition of the mantle wedge. We use a two-dimensional ultrahigh-resolution numerical simulation involving 10 × 109 active markers to anticipate the detailed evolution of the internal structure of natural plumes beneath volcanic arcs in intraoceanic subduction settings. The plumes consist of partially molten hydrated peridotite, dry solid mantle, and subducted oceanic crust, which may compose as much as 12% of the plume. As plumes grow and mature these materials mix chaotically, resulting in attenuation and duplication of the original layering on scales of 1-1000 m. Comparison of numerical results with geological observations from the Horoman ultramafic complex in Japan suggests that mixing and differentiation processes related to development of partially molten plumes above slabs may be responsible for the strongly layered lithologically mixed (marble cake) structure of asthenospheric mantle wedges.

  20. Influence of mass transfer on bubble plume hydrodynamics

    Directory of Open Access Journals (Sweden)

    IRAN E. LIMA NETO

    2016-03-01

    Full Text Available ABSTRACT This paper presents an integral model to evaluate the impact of gas transfer on the hydrodynamics of bubble plumes. The model is based on the Gaussian type self-similarity and functional relationships for the entrainment coefficient and factor of momentum amplification due to turbulence. The impact of mass transfer on bubble plume hydrodynamics is investigated considering different bubble sizes, gas flow rates and water depths. The results revealed a relevant impact when fine bubbles are considered, even for moderate water depths. Additionally, model simulations indicate that for weak bubble plumes (i.e., with relatively low flow rates and large depths and slip velocities, both dissolution and turbulence can affect plume hydrodynamics, which demonstrates the importance of taking the momentum amplification factor relationship into account. For deeper water conditions, simulations of bubble dissolution/decompression using the present model and classical models available in the literature resulted in a very good agreement for both aeration and oxygenation processes. Sensitivity analysis showed that the water depth, followed by the bubble size and the flow rate are the most important parameters that affect plume hydrodynamics. Lastly, dimensionless correlations are proposed to assess the impact of mass transfer on plume hydrodynamics, including both the aeration and oxygenation modes.

  1. A computational scheme usable for calculating the plume backflow region

    Science.gov (United States)

    Cooper, B. P., Jr.

    1978-01-01

    The effects of the nozzle wall boundary layer on the plume flowfield are neglected in the majority of computational schemes which exist for the calculation of rocket engine exhaust plume flowfields. This neglect, which is unimportant in many applications, becomes unacceptable for applications where a surface which can be adversely affected by plume impingement forces, heating, or contamination is located behind the nozzle exit plane in what is called the 'plume backflow region'. The flow in this region originates in, and is highly affected by, the nozzle wall boundary layer. The inclusion of the effects of the boundary layer in the calculations is required for an appropriate determination of the flowfield properties within this region. A description is presented of the results of modifications of a method-of-characteristics computer program. The modifications were made to include the effects of the nozzle wall boundary layer on the plume flowfield. A comparison of computed and experimental data indicates that the employed computer program may be a useful tool for calculating the entire plume flowfield for liquid propellant rocket engines.

  2. On the mechanism of atmospheric pressure plasma plume

    Science.gov (United States)

    Chen, Longwei; Zhao, Peng; Shu, Xingsheng; Shen, Jie; Meng, Yuedong

    2010-08-01

    For the purpose of unveiling the parameters influencing the length of atmospheric pressure plasma plume, an over 165 cm long argon plasma plume is generated in the quartz tube attached to the nozzle of the device. Dependence of plasma length on discharge parameters such as applied voltage, frequency of power supply, and argon gas flow rate was investigated. Experimental results indicated that (a) the applied voltage plays crucial roles on plasma plume length, that is, the plasma plume length exponentially increases with the applied voltage, (b) the plasma plume length increases with frequency, more obviously when the applied voltage is higher, (c) the plasma plume length increases with argon gas flow rate, reaches its maximum at critical value of the gas flow rate, and then decreases again. An evaluation of the physical phenomena involved in streamer propagation, particularly of the energy balance, was investigated. The numerical results were qualitatively consistent with previous experimental results by successfully indicating the high velocity of "plasma bullet" and providing physical mechanism of energy balance determining streamer length.

  3. A Preliminary Model of Infrared Image Generation for Exhaust Plume

    Directory of Open Access Journals (Sweden)

    Fei Mei

    2011-06-01

    Full Text Available Based on the irradiance calculation of all pixels on the focal plane array, a preliminary infrared imaging prediction model of exhaust plume that have considered the geometrical and the thermal resolution of the camera was developed to understanding the infrared characteristics of exhaust plume. In order to compute the irradiance incident on each pixel, the gas radiation transfer path in the plume for the instantaneous field of view corresponds to the pixel was solved by the simultaneous equation of a enclosure cylinder which covers the exhaust plume and the line of sight. Radiance of the transfer path was calculated by radiation transfer equation for nonscattering gas. The radiative properties of combustion needed in the equation was provided by employing Malkmus model with EM2C narrow band database(25cm-1. The pressure, species concentration along the path was determination by CFD analysis. The relative irradiance intensity of each pixel was converted to color in the display according to gray map coding and hot map coding. Infrared image of the exhaust plumes from a subsonic axisymmetric nozzle with different relative position of camera and the plume was predicted with the model. By changing the parameters, such as FOV and space resolution, the image of different imaging system can be predicted.

  4. Implementation of microwave transmissions for rocket exhaust plume diagnostics

    Science.gov (United States)

    Coutu, Nicholas George

    Rocket-launched vehicles produce a trail of exhaust that contains ions, free electrons, and soot. The exhaust plume increases the effective conductor length of the rocket. A conductor in the presence of an electric field (e.g. near the electric charge stored within a cloud) can channel an electric discharge. The electrical conductivity of the exhaust plume is related to its concentration of free electrons. The risk of a lightning strike in-flight is a function of both the conductivity of the body and its effective length. This paper presents an approach that relates the electron number density of the exhaust plume to its propagation constant. Estimated values of the collision frequency and electron number density generated from a numerical simulation of a rocket plume are used to guide the design of the experimental apparatus. Test par meters are identified for the apparatus designed to transmit a signal sweep form 4 GHz to 7 GHz through the exhaust plume of a J-class solid rocket motor. Measurements of the scattering parameters imply that the transmission does not penetrate the plume, but instead diffracts around it. The electron density 20 cm downstream from the nozzle exit is estimated to be between 2.7x1014 m--3 and 5.6x10 15 m--3.

  5. Updated Conceptual Model for the 300 Area Uranium Groundwater Plume

    Energy Technology Data Exchange (ETDEWEB)

    Zachara, John M.; Freshley, Mark D.; Last, George V.; Peterson, Robert E.; Bjornstad, Bruce N.

    2012-11-01

    The 300 Area uranium groundwater plume in the 300-FF-5 Operable Unit is residual from past discharge of nuclear fuel fabrication wastes to a number of liquid (and solid) disposal sites. The source zones in the disposal sites were remediated by excavation and backfilled to grade, but sorbed uranium remains in deeper, unexcavated vadose zone sediments. In spite of source term removal, the groundwater plume has shown remarkable persistence, with concentrations exceeding the drinking water standard over an area of approximately 1 km2. The plume resides within a coupled vadose zone, groundwater, river zone system of immense complexity and scale. Interactions between geologic structure, the hydrologic system driven by the Columbia River, groundwater-river exchange points, and the geochemistry of uranium contribute to persistence of the plume. The U.S. Department of Energy (DOE) recently completed a Remedial Investigation/Feasibility Study (RI/FS) to document characterization of the 300 Area uranium plume and plan for beginning to implement proposed remedial actions. As part of the RI/FS document, a conceptual model was developed that integrates knowledge of the hydrogeologic and geochemical properties of the 300 Area and controlling processes to yield an understanding of how the system behaves and the variables that control it. Recent results from the Hanford Integrated Field Research Challenge site and the Subsurface Biogeochemistry Scientific Focus Area Project funded by the DOE Office of Science were used to update the conceptual model and provide an assessment of key factors controlling plume persistence.

  6. P and S wave delays caused by thermal plumes

    Science.gov (United States)

    Maguire, Ross; Ritsema, Jeroen; van Keken, Peter E.; Fichtner, Andreas; Goes, Saskia

    2016-05-01

    Many studies have sought to seismically image plumes rising from the deep mantle in order to settle the debate about their presence and role in mantle dynamics, yet the predicted seismic signature of realistic plumes remains poorly understood. By combining numerical simulations of flow, mineral-physics constraints on the relationships between thermal anomalies and wave speeds, and spectral-element method based computations of seismograms, we estimate the delay times of teleseismic S and P waves caused by thermal plumes. Wavefront healing is incomplete for seismic periods ranging from 10 s (relevant in traveltime tomography) to 40 s (relevant in waveform tomography). We estimate P wave delays to be immeasurably small ( 20 s), measurements of instantaneous phase misfit may be more useful in resolving narrow plume conduits. To detect S wave delays of 0.4-0.8 s and the diagnostic frequency dependence imparted by plumes, it is key to minimize the influence of the heterogeneous crust and upper mantle. We argue that seismic imaging of plumes will advance significantly if data from wide-aperture ocean-bottom networks were available since, compared to continents, the oceanic crust and upper mantle is relatively simple.

  7. Recovery of water from acid mine drainage

    CSIR Research Space (South Africa)

    Mulopo, J

    2010-10-01

    Full Text Available acid mine drainage J Mulopo, SR Motaung , M Mashego and M Moalusi Natural Resources and the Environment, CSIR, P O Box 395, Pretoria, 0001, South Africa ConClusion The optimal region for the operation and design of a sulphate removal reactor... operating conditions results in a process with somehow large excess feed. Hence, one should not optimize the reactor configuration independently of the process in which the reactor is going to be used. Figure 1: Rate of Sulphate Removal at 25o...

  8. Ultrasound-guided drainage of deep pelvic abscesses

    DEFF Research Database (Denmark)

    Lorentzen, Torben; Nolsøe, Christian; Skjoldbye, Bjørn

    2011-01-01

    The aim of this study was to demonstrate and evaluate the ultrasound-guided drainage of deep pelvic abscesses in which transabdominal percutaneous access could not be performed because of overlying structures. A retrospective analysis of 32 consecutive patients with 33 deep pelvic abscesses...... (median diameter 7 cm), 19 were treated with catheter drainage and 18 of these cases resulted in favorable clinical outcomes. Of the smaller abscesses (median diameter 4 cm), 14 were treated with needle drainage. In two of these cases, follow-up US showed that a repeat puncture and drainage was necessary...... and the subsequent in-dwelling catheter period, there were no serious complications related to the drainage procedures. We conclude that ultrasound-guided transrectal, transvaginal, transperineal and transgluteal drainage of deep pelvic abscesses are safe and effective treatment approaches. Based on our findings...

  9. Preoperative biliary drainage for periampullary tumors causing obstructive jaundice; DRainage vs. (direct) OPeration (DROP-trial)

    NARCIS (Netherlands)

    N.A. van der Gaag (Niels); S.M.M. de Castro (Steve); E.A.J. Rauws (Erik); M.J. Bruno (Marco); C.H.J. van Eijck (Casper); E.J. Kuipers (Ernst); J.J.G.M. Gerritsen (Josephus); J.P. Rutten (Joost Paul); J.W. Greve; E.J. Hesselink (Eric); J.H. Klinkenbijl (Jean); I.H.M.B. Rinkes; D. Boerma (Djamila); B.A. Bonsing (Bert); C.J. van Laarhoven (Cees); F.J. Kubben; E. van der Harst (Erwin); M.N. Sosef (Meindert); K. Bosscha (Koop); I.H.J.T. de Hingh (Ignace); L. Th de Wit (Laurens); O.M. van Delden (Otto); O.R.C. Busch (Olivier); T.M. van Gulik (Thomas); P.M.M. Bossuyt (Patrick); D.J. Gouma (Dirk)

    2007-01-01

    textabstractBackground. Surgery in patients with obstructive jaundice caused by a periampullary (pancreas, papilla, distal bile duct) tumor is associated with a higher risk of postoperative complications than in non-jaundiced patients. Preoperative biliary drainage was introduced in an attempt to im

  10. Comparing twist-drill drainage with burr hole drainage for chronic subdural hematoma

    Directory of Open Access Journals (Sweden)

    LIN Xin

    2011-06-01

    Full Text Available 【Abstract】Objective: The surgical management of chronic subdural hematoma (CSDH is still a controver- sial issue, and a standard therapy has not been established because of the unclear pathogenic mechanisms in CSDH. The intention of this paper is to find a simple and efficient surgical procedure for CSDH. Methods: A retrospective study of 448 patients with CSDH by surgical treatment during 2005 to 2009 was con- ducted in order to compare the efficiency between two dif- ferent primary surgical methods, i.e. twist-drill drainage with- out irrigation in Group A (n=178 and one burr-hole with irrigation in Group B (n=270. The results were statistically analyzed. Results: The reoperation rates in Group A and Group B were 7.9% and 11.9% respectively. The good outcome rate was 88.8% and 75.5%, the complication was 7.9% and 20.7% in Group A and Group B, respectively. Conclusions: The burr-hole drainage with irrigation of the hematoma cavity is not beneficial to the outcome and prognosis. Irrigation is not important in the surgical treat- ment for CSDH. Thus in initial treatment, twist-drill drainage without irrigation of the hematoma cavity is recommended because it is relatively safe, time-saving and cost-effective. Key words: Hematoma, subdural; Brain injury, chronic; Drainage

  11. Reuse of drainage water model : calculation method of drainage water and watertable depth

    NARCIS (Netherlands)

    Roest, C.W.J.; Rijtema, P.E.; Abdel Khalik, M.A.

    1986-01-01

    The main objective of the project is to assist the Ministry of Irrigation in Egypt in the planning of future watermanagement strategies incorporating reuse of drainage water practices. In order to achieve this main objective a comprehensive measurement programme has been initiated and a mathematical

  12. Pancreatic tissue fluid pressure during drainage operations for chronic pancreatitis

    DEFF Research Database (Denmark)

    Ebbehøj, N; Borly, L; Madsen, P

    1990-01-01

    Pancreatic tissue fluid pressure was measured in 10 patients undergoing drainage operations for painful chronic pancreatitis. The pressure was measured by the needle technique in the three anatomic regions of the pancreas before and at different stages of the drainage procedure, and the results...... a decrease in pancreatic tissue fluid pressure during drainage operations for pain in chronic pancreatitis. Regional pressure decrease were apparently unrelated to ERCP findings....

  13. Pancreatic tissue fluid pressure during drainage operations for chronic pancreatitis

    DEFF Research Database (Denmark)

    Ebbehøj, N; Borly, L; Madsen, P

    1990-01-01

    Pancreatic tissue fluid pressure was measured in 10 patients undergoing drainage operations for painful chronic pancreatitis. The pressure was measured by the needle technique in the three anatomic regions of the pancreas before and at different stages of the drainage procedure, and the results...... a decrease in pancreatic tissue fluid pressure during drainage operations for pain in chronic pancreatitis. Regional pressure decrease were apparently unrelated to ERCP findings....

  14. Evidence for melt channelization in Galapagos plume-ridge interaction

    Science.gov (United States)

    Mittal, T.; Richards, M. A.

    2015-12-01

    Many present-day hot spots are located within ~ 1000 km of a mid-ocean ridge, either currently or in the geologic past, leading to frequent interaction between these two magmatic regimes. The consequent plume-ridge interactions provide a unique opportunity to test models for asthenosphere-lithosphere dynamics, with the plume acting as a tracer fluid in the problem, and excess magmatism reflecting otherwise unsampled sub-surface phenomena. Galapagos is an off-ridge hotspot with the mantle plume located ~150-250 km south of the plate boundary. Plume-ridge interaction in Galapagos is expressed by the formation of volcanic lineaments of islands and seamounts - e.g., the Wolf-Darwin lineament (WDL) - providing a direct probe of the plume-ridge interaction process, especially in regards to geochemical data. Although several models have been proposed to explain plume-ridge interaction in Galapagos, none adequately explain the observed characteristics, especially the WDL. In particular, predicted lithospheric fault orientations and melt density considerations appear at odds with observations, suggesting that lithospheric extension is not the primary process for formation of these islands. Other off-ridge hotspots interacting with nearby spreading ridges, such as Reunion and Louisville, also exhibit volcanic lineaments linking the plume and the ridge. Thus these lineament-type features are a common outcome of plume-ridge interaction that are indicative of the underlying physics. We propose that the lineaments are surface expressions of narrow sub-lithospheric melt channels focused towards the spreading ridge. These channels should form naturally due to the reactive infiltration instability in a two-phase flow of magma and solid mantle as demonstrated in two-phase flow simulations (e.g., Katz & Weatherley 2012). For Galapagos, we show that melt channels can persist thermodynamically over sufficient length-scales to link the plume and nearby ridge segments. We also show that

  15. Hydrothermal plume anomalies along the Central Indian Ridge

    Institute of Scientific and Technical Information of China (English)

    ZHU Jian; LIN Jian; GUO ShiQin; CHEN YongShun

    2008-01-01

    Water column turbidity and temperature were investigated along the Central Indian Ridge (CIR) from 25°19'S to 23°48'S during a December 2005 cruise on board Chinese P/V DayangYihao.Measurements were made using NOAA's MAPR (Miniature Autonomous Plume Recorder) sensors during CTD casts,TV grabber operations,and tow-yo profiles,yielding the following results on hydrothermal plume anomalies:(1) Strong hydrothermal turbidity and temperature anomalies were recorded over the pre-viously discovered Kairei (25°19.2'S,70°02.4'E) and Edmond (23°52.7'S,69°35.8"E) vent fields,with the plume anomalies concentrated at depths of 2150-2300 m and 2700-2900 m,respectively.The maxi-mum height of the turbidity anomalies near the Kairei vent field recorded in December 2005 was slightly below 2100 m,which is consistent with the plume depth measured in June 2001,indicating that the Kairei plume may have maintained its buoyancy flux in the intervening 4.5 years.(2) The water column beneath the Kairei plume has background anomalies of about 0.005△NTU,whereas no such back-ground turbidity anomalies were observed below the Edmond hydrothermal plume.(3) No visible tur-bidity anomalies were detected from 24°42'S to 24°12'S including the Knorr Seamount.Thus 24°12'S marks the southern end of the hydrothermal plume.(4) Significant turbidity anomalies were observed at four individual sections from 24°12'S to 23°56'S at the depth of 2500-3000 m along the eastern rift valley wall.Whether the individual sections of anomalies are connected is still unknown due to the absence of data at the intervening gaps.If the four sections are connected with each other and are linked to the Edmond vent field farther to the north,the total along-axis length of the plume anomaly would be more than 37 km,implying a plume incidence value Ph of 0.38,greater than the predicted Ph of 0.21-0.25 based on the spreading rate of the Central Indian Ridge.

  16. Studies of the Kuwait oil fire plume during midsummer 1991

    Science.gov (United States)

    Daum, P. H.; Al-Sunaid, A.; Busness, K. M.; Hales, J. M.; Mazurek, M.

    1993-01-01

    This paper reports aircraft observations of the Kuwait oil fire plume conducted during the period July 31-August 17, 1991. During this study the plume was transported almost exclusively to the south of Kuwait over the Persian Gulf and the Arabian Peninsula. The plume base was generally found to be well above the surface, in some cases as high as 1-2 km; plume tops did not exceed 5 km. Aerosol mass (based on measured aerosol constituents) in the central section of the plume, ca. 150-200 km downwind of the source region, was found to be >500 μg/m3, with number densities in the size range (approximate) 0.2 carbon, and organic carbon. Sodium chloride constituted a surprisingly large component of the soluble inorganic mass. The aerosol particles appeared to function as good cloud condensation nuclei, with a large fraction of accumulation mode particles (by number) activated at a supersaturation of 0.6%. Under conditions in which the plume was relatively compact, transmittance of solar radiation to the surface was only 10-20%. Plume albedo was observed to be as low as 2-3% close to the source region, consistent with the high elemental-carbon concentrations present in the plume. Trace gas concentrations were consistent with fuel composition and with current knowledge of atmospheric chemical processes. Sulfur dioxide concentrations close to the source region were found to be as high as 300-400 ppb. The emissions factor for S (expressed as a percentage) was estimated to be 1.8%, which is consistent with estimates of a fuel sulfur content of 2-2.5%. SO2 was found to be only slowly oxidized (<1%/h). Nitrogen oxide concentrations were found to be quite low (<50 ppb near the source, decreasing to 1-2 ppb well downwind), which is consistent with a crude oil nitrogen source. Despite relatively low concentrations, sufficient NOx was present to act as a catalyst to generate excess ozone in the plume as the plume was transported downwind and dispersed.

  17. Coupling between drainage and coarsening in wet foam

    Indian Academy of Sciences (India)

    S Saha; S Bhaumik; A Roy

    2009-06-01

    Drainage and coarsening are two coupled phenomena during the evolution of wet foam. We show the variation in the growth rate of bubble size, along the height in a column of Gillette shaving foam, by microscope imaging. Simultaneously, the drainage of liquid at the same heights has been investigated by Raman spectroscopic measurements. The observations made in these two sets of experiments indicate the coupling between drainage and coarsening in wet foam. We could explain the correlation between our observed data on drainage and coarsening by the empirical relation, proposed by others, in the literature.

  18. Bioreactor for acid mine drainage control

    Science.gov (United States)

    Zaluski, Marek H.; Manchester, Kenneth R.

    2001-01-01

    A bioreactor for reacting an aqueous heavy metal and sulfate containing mine drainage solution with sulfate reducing bacteria to produce heavy metal sulfides and reduce the sulfuric acid content of the solution. The reactor is an elongated, horizontal trough defining an inlet section and a reaction section. An inlet manifold adjacent the inlet section distributes aqueous mine drainage solution into the inlet section for flow through the inlet section and reaction section. A sulfate reducing bacteria and bacteria nutrient composition in the inlet section provides sulfate reducing bacteria that with the sulfuric acid and heavy metals in the solution to form solid metal sulfides. The sulfate reducing bacteria and bacteria nutrient composition is retained in the cells of a honeycomb structure formed of cellular honeycomb panels mounted in the reactor inlet section. The honeycomb panels extend upwardly in the inlet section at an acute angle with respect to the horizontal. The cells defined in each panel are thereby offset with respect to the honeycomb cells in each adjacent panel in order to define a tortuous path for the flow of the aqueous solution.

  19. Coordinated sensor cueing for chemical plume detection

    Science.gov (United States)

    Abraham, Nathan J.; Jensenius, Andrea M.; Watkins, Adam S.; Hawthorne, R. Chad; Stepnitz, Brian J.

    2011-05-01

    This paper describes an organic data fusion and sensor cueing approach for Chemical, Biological, Radiological, and Nuclear (CBRN) sensors. The Joint Warning and Reporting Network (JWARN) uses a hardware component referred to as the JWARN Component Interface Device (JCID). The Edgewood Chemical and Biological Center has developed a small footprint and open architecture solution for the JCID capability called JCID-on-a-Chip (JoaC). The JoaC program aims to reduce the cost and complexity of the JCID by shrinking the necessary functionality down to a small single board computer. This effort focused on development of a fusion and cueing algorithm organic to the JoaC hardware. By embedding this capability in the JoaC, sensors have the ability to receive and process cues from other sensors without the use of a complex and costly centralized infrastructure. Additionally, the JoaC software is hardware agnostic, as evidenced by its drop-in inclusion in two different system-on-a-chip platforms including Windows CE and LINUX environments. In this effort, a partnership between JPM-CA, JHU/APL, and the Edgewood Chemical and Biological Center (ECBC), the authors implemented and demonstrated a new algorithm for cooperative detection and localization of a chemical agent plume. This experiment used a pair of mobile Joint Services Lightweight Standoff Chemical Agent Detector (JSLSCAD) units which were controlled by fusion and cueing algorithms hosted on a JoaC. The algorithms embedded in the JoaC enabled the two sensor systems to perform cross cueing and cooperatively form a higher fidelity estimate of chemical releases by combining sensor readings. Additionally, each JSLSCAD had the ability to focus its search on smaller regions than those required by a single sensor system by using the cross cue information from the other sensor.

  20. Constraining the Enceladus plume using numerical simulation and Cassini data

    Science.gov (United States)

    Yeoh, Seng Keat; Li, Zheng; Goldstein, David B.; Varghese, Philip L.; Levin, Deborah A.; Trafton, Laurence M.

    2017-01-01

    Since its discovery, the Enceladus plume has been subjected to intense study due to the major effects that it has on the Saturnian system and the window that it provides into the interior of Enceladus. However, several questions remain and we attempt to answer some of them in this work. In particular, we aim to constrain the H2O production rate from the plume, evaluate the relative importance of the jets and the distributed sources along the Tiger Stripes, and make inferences about the source of the plume by accurately modeling the plume and constraining the model using the Cassini INMS and UVIS data. This is an extension of a previous work (Yeoh, S.K., et al. [2015] Icarus, 253, 205-222) in which we only modeled the collisional part of the Enceladus plume and studied its important physical processes. In this work, we propagate the plume farther into space where the flow has become free-molecular and the Cassini INMS and UVIS data were sampled. Then, we fit this part of the plume to the INMS H2O density distributions sampled along the E3, E5 and E7 trajectories and also compare some of the fit results with the UVIS measurements of the plume optical depth collected during the solar occultation observation on 18 May 2010. We consider several vent conditions and source configurations for the plume. By constraining our model using the INMS and UVIS data, we estimate H2O production rates of several hundred kgs-1: 400-500 kg/s during the E3 and E7 flybys and ∼900 kg/s during the E5 flyby. These values agree with other estimates and are consistent with the observed temporal variability of the plume over the orbital period of Enceladus (Hedman, M.M., et al. [2013] Nature, 500, 182-184). In addition, we determine that one of the Tiger Stripes, Cairo, exhibits a local temporal variability consistent with the observed overall temporal variability of the plume. We also find that the distributed sources along the Tiger Stripes are likely dominant while the jets provide a

  1. Enceladus Plume Structure and Time Variability: Comparison of Cassini Observations.

    Science.gov (United States)

    Teolis, Ben D; Perry, Mark E; Hansen, Candice J; Waite, J Hunter; Porco, Carolyn C; Spencer, John R; Howett, Carly J A

    2017-09-05

    During three low-altitude (99, 66, 66 km) flybys through the Enceladus' plume in 2010 and 2011, Cassini's ion neutral mass spectrometer (INMS) made its first high spatial resolution measurements of the plume's gas density and distribution, detecting in situ the individual gas jets within the broad plume. Since those flybys, more detailed Imaging Science Subsystem (ISS) imaging observations of the plume's icy component have been reported, which constrain the locations and orientations of the numerous gas/grain jets. In the present study, we used these ISS imaging results, together with ultraviolet imaging spectrograph stellar and solar occultation measurements and modeling of the three-dimensional structure of the vapor cloud, to constrain the magnitudes, velocities, and time variability of the plume gas sources from the INMS data. Our results confirm a mixture of both low and high Mach gas emission from Enceladus' surface tiger stripes, with gas accelerated as fast as Mach 10 before escaping the surface. The vapor source fluxes and jet intensities/densities vary dramatically and stochastically, up to a factor 10, both spatially along the tiger stripes, and over time between flyby observations. This complex spatial variability and dynamics may result from time-variable tidal stress fields interacting with subsurface fissure geometry and tortuosity beyond detectability, including changing gas pathways to the surface, and fluid flow and boiling in response evolving lithostatic stress conditions. The total plume gas source has 30% uncertainty depending on the contributions assumed for adiabatic and nonadiabatic gas expansion/acceleration to the high Mach emission. The overall vapor plume source rate exhibits stochastic time variability up to a factor ∼5 between observations, reflecting that found in the individual gas sources/jets. Key Words: Cassini at saturn-Geysers-Enceladus-Gas dynamics-Icy satellites. Astrobiology 17, xxx-xxx.

  2. Hydrogeophysical investigations of the former S-3 ponds contaminant plumes

    Energy Technology Data Exchange (ETDEWEB)

    Revil, Andre [ORNL; Skold, Magnus E [ORNL; Karaoulis, Marios [Colorado School of Mines, Golden; Schmutz, Myriam [Institut Polytechnique de Bordeaux; Hubbard, Susan S [Lawrence Berkeley National Laboratory (LBNL); Mehlhorn, Tonia L [ORNL; Watson, David B [ORNL

    2013-01-01

    At the Oak Ridge Integrated Field Research Challenge site, near Oak Ridge, Tennessee, contaminants from the former S-3 ponds have infiltrated the shallow saprolite for over 60 years. Two- and three-dimensional DC-resistivity tomography is used to characterize the number and location of the main contaminant plumes, which include high concentration of nitrate. These contaminant plumes have typically an electrical resistivity in the range 2 20 ohm-m while the background saprolite resistivity is in the range 60 120 ohm-m, so the difference of resistivity can be easily mapped using DC-resistivity tomography to locate the contaminant pathways. We develop a relationship to derive the in situ nitrate concentrations from the 3D resistivity tomograms accounting for the effect of surface conductivity. The footprint of the contamination upon the resistivity is found to be much stronger than the local variations associated with changes in the porosity and the clay content. With this method, we identified a total of five main plumes (termed CP1 to CP5). Plume CP2 corresponds to the main plume in terms of nitrate concentration ( 50,000 ). We also used an active time constrained approach to perform time-lapse resistivity tomography over a section crossing the plumes CP1 and CP2. The sequence of tomograms is used to determine the changes in the nitrate concentrations associated with infiltration of fresh (meteoritic) water from a perched aquifer. This study highlights the importance of accounting for surface conductivity when characterizing plume distributions in clay-rich subsurface systems.

  3. Inventory of drainage wells and potential sources of contaminants to drainage-well inflow in Southwest Orlando, Orange County, Florida

    Science.gov (United States)

    Taylor, George Fred

    1993-01-01

    Potential sources of contaminants that could pose a threat to drainage-well inflow and to water in the Floridan aquifer system in southwest Orlando, Florida, were studied between October and December 1990. Drainage wells and public-supply wells were inventoried in a 14-square-mile area, and available data on land use and activities within each drainage well basin were tabulated. Three public-supply wells (tapping the Lower Floridan aquifer) and 38 drainage wells (open to the Upper Floridan aquifer) were located in 17 drainage basins within the study area. The primary sources of drainage-well inflow are lake overflow, street runoff, seepage from the surficial aquifer system, and process-wastewater disposal. Drainage-well inflow from a variety of ares, including resi- dential, commercial, undeveloped, paved, and industrial areas, are potential sources of con- taminants. The four general types of possible contaminants to drainage-well inflow are inorganic chemicals, organic compounds, turbidity, and microbiological contaminants. Potential contami- nant sources include plant nurseries, citrus groves, parking lots, plating companies, auto- motive repair shops, and most commonly, lake- overflow water. Drainage wells provide a pathway for contaminants to enter the Upper Floridan aquifer and there is a potential for contaminants to move downward from the Upper Floridan to the Lower Floridan aquifer.

  4. Is ultrasonography-guided drainage a safe and effective alternative to incision and drainage for deep neck space abscesses?

    Science.gov (United States)

    Dabirmoghaddam, P; Mohseni, A; Navvabi, Z; Sharifi, A; Bastaninezhad, S; Safaei, A

    2017-03-01

    Deep neck space abscesses are common head and neck surgery emergencies. Traditionally, surgical incision and drainage has been the main treatment for deep neck abscesses. Recently, it has been suggested that ultrasound-guided drainage of neck abscesses can be an effective and less invasive alternative to incision and drainage. Patients with deep neck space abscesses referred to the emergency department of Amiralam Hospital were assessed and enrolled to the study if they met the inclusion criteria. Patients were randomly assigned to incision and drainage or ultrasound-guided drainage groups using sealed envelopes. Sixty patients were evaluated, with 30 patients in each group. There was a significant difference (p < 0.001) in mean length of hospital stay between patients who underwent ultrasound-guided drainage (5.47 days) and those who underwent incision and drainage (9.70 days). Ultrasound-guided drainage is an effective and safe procedure, leading to shorter hospital stay, and thus may be a suitable alternative to incision and drainage of deep neck abscesses.

  5. Near-field entrainment in black smoker plumes

    Science.gov (United States)

    Smith, J. E.; Germanovich, L. N.; Lowell, R. P.

    2013-12-01

    In this work, we study the entrainment rate of the ambient fluid into a plume in the extreme conditions of hydrothermal venting at ocean floor depths that would be difficult to reproduce in the laboratory. Specifically, we investigate the flow regime in the lower parts of three black smoker plumes in the Main Endeavour Field on the Juan de Fuca Ridge discharging at temperatures of 249°C, 333°C, and 336°C and a pressure of 21 MPa. Such flow conditions are typical for ocean floor hydrothermal venting but would be difficult to reproduce in the laboratory. The centerline temperature was measured at several heights in the plume above the orifice. Using a previously developed turbine flow meter, we also measured the mean flow velocity at the orifice. Measurements were conducted during dives 4452 and 4518 on the submersible Alvin. Using these measurements, we obtained a range of 0.064 - 0.068 for values of the entrainment coefficient α, which is assumed constant near the orifice. This is half the value of α ≈ 0.12 - 0.13 that would be expected for plume flow regimes based on the existing laboratory results and field measurements in lower temperature and pressure conditions. In fact, α = 0.064 - 0.068 is even smaller than the value of α ≈ 0.075 characteristic of jet flow regimes and appears to be the lowest reported in the literature. Assuming that the mean value α = 0.066 is typical for hydrothermal venting at ocean floor depths, we then characterized the flow regimes of 63 black smoker plumes located on the Endeavor Segment of the Juan de Fuca Ridge. Work with the obtained data is ongoing, but current results indicate that approximately half of these black smokers are lazy in the sense that their plumes exhibit momentum deficits compared to the pure plume flow that develops as the plume rises. The remaining half produces forced plumes that show the momentum excess compared to the pure plumes. The lower value of the entrainment coefficient has important

  6. AATSR Based Volcanic Ash Plume Top Height Estimation

    Science.gov (United States)

    Virtanen, Timo H.; Kolmonen, Pekka; Sogacheva, Larisa; Sundstrom, Anu-Maija; Rodriguez, Edith; de Leeuw, Gerrit

    2015-11-01

    The AATSR Correlation Method (ACM) height estimation algorithm is presented. The algorithm uses Advanced Along Track Scanning Radiometer (AATSR) satellite data to detect volcanic ash plumes and to estimate the plume top height. The height estimate is based on the stereo-viewing capability of the AATSR instrument, which allows to determine the parallax between the satellite's nadir and 55◦ forward views, and thus the corresponding height. AATSR provides an advantage compared to other stereo-view satellite instruments: with AATSR it is possible to detect ash plumes using brightness temperature difference between thermal infrared (TIR) channels centered at 11 and 12 μm. The automatic ash detection makes the algorithm efficient in processing large quantities of data: the height estimate is calculated only for the ash-flagged pixels. Besides ash plumes, the algorithm can be applied to any elevated feature with sufficient contrast to the background, such as smoke and dust plumes and clouds. The ACM algorithm can be applied to the Sea and Land Surface Temperature Radiometer (SLSTR), scheduled for launch at the end of 2015.

  7. Sewage outfall plume dispersion observations with an autonomous underwater vehicle.

    Science.gov (United States)

    Ramos, P; Cunha, S R; Neves, M V; Pereira, F L; Quintaneiro, I

    2005-01-01

    This work represents one of the first successful applications of Autonomous Underwater Vehicles (AUVs) for interdisciplinary coastal research. A monitoring mission to study the shape and estimate the initial dilution of the S. Jacinto sewage outfall plume using an AUV was performed on July 2002. An efficient sampling strategy enabling greater improvements in spatial and temporal range of detection demonstrated that the sewage effluent plume can be clearly traced using naturally occurring tracers in the wastewater. The outfall plume was found at the surface highly influenced by the weak stratification and low currents. Dilution varying with distance downstream was estimated from the plume rise over the outfall diffuser until a nearly constant value of 130:1, 60 m from the diffuser, indicating the near field end. Our results demonstrate that AUVs can provide high-quality measurements of physical properties of effluent plumes in a very effective manner and valuable considerations about the initial mixing processes under real oceanic conditions can be further investigated.

  8. A cold plasma plume with a highly conductive liquid electrode

    Institute of Scientific and Technical Information of China (English)

    Chen Guang-Liang; Chen Shi-gua; Chen Wen-Xing; Yang Si-Ze

    2008-01-01

    A cold dielectric barrier discharge (DBD) plasma plume with one highly conductive liquid electrode has been developed to treat thermally sensitive materials, and its preliminary discharging characteristics have been studied. The averaged electron temperature and density is estimated to be 0.6eV and 1011/cm3, respectively. The length of plasma plume can reach 5cm with helium gas (He), and the conductivity of the outer electrode affects the plume length obviously. This plasma plume could be touched by bare hand without causing any burning or painful sensation,which may provide potential application for safe aseptic skin care. Moreover, the oxidative particles (e.g., OH, O*03) in the downstream oxygen (02) gas of the plume have been applied to treat the landfill leachate. The results show that the activated 02 gas can degrade the landfill leachate effectively, and the chemical oxygen demand (COD),conductivity, biochemical oxygen demand (BOD), and suspended solid (SS) can be decreased by 52%, 57%, 76% and 92%, respectively.

  9. Solar coronal plumes and the fast solar wind

    CERN Document Server

    Dwivedi, B N

    2015-01-01

    The spectral profiles of the coronal Ne viii line at 77 nm have different shapes in quiet-Sun regions and coronal holes (CHs). A single Gaussian fit of the line profile provides an adequate approximation in quiet-Sun areas, whereas a strong shoulder on the long-wavelength side is a systematic feature in CHs. Although this has been noticed since 1999, no physical reason for the peculiar shape could be given. In an attempt to identify the cause of this peculiarity, we address three problems that could not be conclusively resolved in a review article by a study team of the International Space Science Institute (ISSI; Wilhelm et al. 2011) : (1) The physical processes operating at the base and inside of plumes as well as their interaction with the solar wind (SW). (2) The possible contribution of plume plasma to the fast SW streams. (3) The signature of the first-ionization potential (FIP) effect between plumes and inter-plume regions (IPRs). Before the spectroscopic peculiarities in IPRs and plumes in polar coron...

  10. Estimation of Enceladus Plume Density Using Cassini Flight Data

    Science.gov (United States)

    Wang, Eric K.; Lee, Allan Y.

    2011-01-01

    The Cassini spacecraft was launched on October 15, 1997 by a Titan 4B launch vehicle. After an interplanetary cruise of almost seven years, it arrived at Saturn on June 30, 2004. In 2005, Cassini completed three flybys of Enceladus, a small, icy satellite of Saturn. Observations made during these flybys confirmed the existence of water vapor plumes in the south polar region of Enceladus. Five additional low-altitude flybys of Enceladus were successfully executed in 2008-9 to better characterize these watery plumes. During some of these Enceladus flybys, the spacecraft attitude was controlled by a set of three reaction wheels. When the disturbance torque imparted on the spacecraft was predicted to exceed the control authority of the reaction wheels, thrusters were used to control the spacecraft attitude. Using telemetry data of reaction wheel rates or thruster on-times collected from four low-altitude Enceladus flybys (in 2008-10), one can reconstruct the time histories of the Enceladus plume jet density. The 1 sigma uncertainty of the estimated density is 5.9-6.7% (depending on the density estimation methodology employed). These plume density estimates could be used to confirm measurements made by other onboard science instruments and to support the modeling of Enceladus plume jets.

  11. Pyroxenite in the Galapagos plume source at 65 Ma

    Science.gov (United States)

    Whalen, W. T.; Gazel, E.; Vidito, C. A.; Herzberg, C. T.; Class, C.; Bizimis, M.; Alvarado-Induni, G.

    2013-12-01

    Mantle plumes originate from boundary layers below the upper mantle. Their surface expressions as hotspot tracks have been linked to voluminous outpourings of lava in the form of large igneous provinces. The Galapagos hotspot has been active since ~90 Ma and the oldest lavas of its associated submarine ridge have been dated to ~14 Ma, subducting at the Middle America Trench, off Costa Rica. The Galapagos plume head magmatic production is preserved as the Caribbean Large Igneous Province (CLIP). A series of 15-65 Ma accreted Galapagos paleo-ridges and islands/seamounts are accreted in the Pacific coast of Costa Rica and Panama. One of these accreted terranes, the Quepos block on the west coast of Costa Rica is an ancient, ~65 Ma Galapagos island. Olivine phenocrysts from Quepos picrites have elevated Ni and low Ca and Mn and Fe/Mn indicative of a dominant pyroxenite source component while CLIP samples are dominated by a peridotite source. The mantle potential temperature (max) of the plume changed from ~1650 to ~1550 C at 65 Ma. This change correlates with the first appearance of the pyroxenite component and an EMII signature (Northern Galapagos Domain) in the Galapagos plume. A relatively dense pyroxenite component may provide a mechanism for the change in Tp due to its effect on the plume's bouyancy. Alternatively, the pyroxenite component was diluted by high peridotite melt fraction during the massive production of the CLIP.

  12. Effects of Boundary Conditions on Near Field Plasma Plume Simulations

    Science.gov (United States)

    Boyd, Iain

    2004-11-01

    The successful development of various types of electric propulsion devices is providing the need for accurate assessment of integration effects generated by the interaction of the plasma plumes of these thrusters with the host spacecraft. Assessment of spacecraft interaction effects in ground based laboratory facilities is inadequate due to the technical difficulties involved in accurately recreating the near vacuum ambient conditions experienced in space. This situation therefore places a heavy demand on computational modeling of plasma plume phenomena. Recently (Boyd and Yim, Journal of Applied Physics, Vol. 95, 2004, pp. 4575-5484) a hybrid model of the near field of the plume of a Hall thruster was reported in which the heavy species are modeled using particles and the electrons are modeled using a detailed fluid description. The present study continues the model development and assessment by considering the sensitivity of computed results to different types of boundary conditions that must be formulated for the thruster exit, for the cathode exit, for the thruster walls, and for the plume far field. The model is assessed through comparison of its predictions with several sets of experimental data measured in the plume of the BHT-200 Hall thruster.

  13. Calculating the probability of injected carbon dioxide plumes encountering faults

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, P.D.

    2011-04-01

    One of the main concerns of storage in saline aquifers is leakage via faults. In the early stages of site selection, site-specific fault coverages are often not available for these aquifers. This necessitates a method using available fault data to estimate the probability of injected carbon dioxide encountering and migrating up a fault. The probability of encounter can be calculated from areal fault density statistics from available data, and carbon dioxide plume dimensions from numerical simulation. Given a number of assumptions, the dimension of the plume perpendicular to a fault times the areal density of faults with offsets greater than some threshold of interest provides probability of the plume encountering such a fault. Application of this result to a previously planned large-scale pilot injection in the southern portion of the San Joaquin Basin yielded a 3% and 7% chance of the plume encountering a fully and half seal offsetting fault, respectively. Subsequently available data indicated a half seal-offsetting fault at a distance from the injection well that implied a 20% probability of encounter for a plume sufficiently large to reach it.

  14. Bipropellant rocket exhaust plume analysis on the Galileo spacecraft

    Science.gov (United States)

    Guernsey, C. S.; Mcgregor, R. D.

    1986-01-01

    This paper describes efforts to quantify the contaminant flow field produced by 10 N thrust bipropellant rocket engines used on the Galileo spacecraft. The prediction of the composition of the rocket exhaust by conventional techniques is found to be inadequate to explain experimental observations of contaminant deposition on moderately cold (200 K) surfaces. It is hypothesized that low volatility contaminants are formed by chemical reactions which occur on the surfaces. The flow field calculations performed using the direct simulation Monte Carlo method give the expected result that the use of line-of-sight plume shields may have very little effect on the flux of vapor phase contaminant species to a surface, especially if the plume shields are located so close to the engine that the interaction of the plume with the shield is in the transition flow regime. It is shown that significant variations in the exhaust plume composition caused by nonequilibrium effects in the flow field lead to very low concentrations of species which have high molecular weights in the more rarefied regions of the flow field. Recommendations for the design of spacecraft plume shields and further work are made.

  15. Exact solutions for nonlinear foam drainage equation

    Science.gov (United States)

    Zayed, E. M. E.; Al-Nowehy, Abdul-Ghani

    2016-09-01

    In this paper, the modified simple equation method, the exp-function method, the soliton ansatz method, the Riccati equation expansion method and the ( G^' }/G) -expansion method are used to construct exact solutions with parameters of the nonlinear foam drainage equation. When these parameters are taken to be special values, the solitary wave solutions and the trigonometric function solutions are derived from the exact solutions. The obtained results confirm that the proposed methods are efficient techniques for analytic treatments of a wide variety of nonlinear partial differential equations in mathematical physics. We compare our results together with each other yielding from these integration tools. Also, our results have been compared with the well-known results of others.

  16. Exact solutions for nonlinear foam drainage equation

    Science.gov (United States)

    Zayed, E. M. E.; Al-Nowehy, Abdul-Ghani

    2017-02-01

    In this paper, the modified simple equation method, the exp-function method, the soliton ansatz method, the Riccati equation expansion method and the ( G^' }/G)-expansion method are used to construct exact solutions with parameters of the nonlinear foam drainage equation. When these parameters are taken to be special values, the solitary wave solutions and the trigonometric function solutions are derived from the exact solutions. The obtained results confirm that the proposed methods are efficient techniques for analytic treatments of a wide variety of nonlinear partial differential equations in mathematical physics. We compare our results together with each other yielding from these integration tools. Also, our results have been compared with the well-known results of others.

  17. Integrated urban drainage, status and perspectives

    DEFF Research Database (Denmark)

    Harremoës, Poul

    2002-01-01

    This paper summarises the status of urban storm drainage as an integrated professional discipline, including the management-policy interface, by which the goals of society are implemented. The paper assesses the development of the discipline since the INTERURBA conference in 1992 and includes...... with a significant conservatism in the business. However, significant integrated analyses have been reported. Most of them deal with the sewer system and the treatment plant, while few incorporate the receiving water as anything but the object of the loads to be minimised by engineering measures up-stream. Important...... measures are local infiltration, source control, storage basins, local treatment and real time control. New paradigms have been introduced: risk of pollution due to system failure, technology for water reuse, sustainability, new architecture and greener up-stream solutions as opposed to down...

  18. Integrated urban drainage, status and perspectives

    DEFF Research Database (Denmark)

    Harremoës, Poul

    2002-01-01

    with a significant conservatism in the business. However, significant integrated analyses have been reported. Most of them deal with the sewer system and the treatment plant, while few incorporate the receiving water as anything but the object of the loads to be minimised by engineering measures up-stream. Important...... aspects of the papers presented at the INTERURBA-II conference in 2001 and the discussions during the conference. Tools for integrated analysis have been developed, but there is less implementation than could be expected. That is due to lack of adequate knowledge about important mechanisms, coupled......This paper summarises the status of urban storm drainage as an integrated professional discipline, including the management-policy interface, by which the goals of society are implemented. The paper assesses the development of the discipline since the INTERURBA conference in 1992 and includes...

  19. Vertical Analysis of Martian Drainage Basins

    Science.gov (United States)

    Stepinski, T. F.; OHara, W. J.

    2003-01-01

    We have performed a vertical analysis of drainage basins on Mars that were computationally extracted from DEMs based on the MOLA data. Longitudinal profiles of main streams are calculated and the slope-area relation is established for 20 basins coming from assorted martian locations. An identical analysis is done for 19 terrestrial river basins. Our results show that, in comparison to terrestrial basins, martian basins have more linear longitudinal profiles, more frequent existence of knickpoints, predominance of asymmetric location of the main stream in the basin, and smaller values of concavity exponent. This suggests a limited role for surface runoff on the global scale. However, two basins extracted from the slopes of martian volcanoes show a strong similarity to terrestrial basins, indicating a possible local role for the process of surface runoff.

  20. Ecology and management of agricultural drainage ditches: a literature review

    Science.gov (United States)

    Agricultural drainage ditches are headwater streams that have been modified or constructed for agricultural drainage, and are often used in conjunction with tile drains. These modified streams are a common landscape feature in Ohio, and constitute 25% of stream habitat within the state. Management o...

  1. Remediation of Acid Mine Drainage with Sulfate Reducing Bacteria

    Science.gov (United States)

    Hauri, James F.; Schaider, Laurel A.

    2009-01-01

    Sulfate reducing bacteria have been shown to be effective at treating acid mine drainage through sulfide production and subsequent precipitation of metal sulfides. In this laboratory experiment for undergraduate environmental chemistry courses, students design and implement a set of bioreactors to remediate acid mine drainage and explain observed…

  2. A synthesis and comparative evaluation of drainage water management

    Science.gov (United States)

    Viable large-scale crop production in the United States requires artificial drainage in humid and poorly drained agricultural regions. Excess water removal is generally achieved by installing tile drains that export water to open ditches that eventually flow into streams. Drainage water management...

  3. Remediation of Acid Mine Drainage with Sulfate Reducing Bacteria

    Science.gov (United States)

    Hauri, James F.; Schaider, Laurel A.

    2009-01-01

    Sulfate reducing bacteria have been shown to be effective at treating acid mine drainage through sulfide production and subsequent precipitation of metal sulfides. In this laboratory experiment for undergraduate environmental chemistry courses, students design and implement a set of bioreactors to remediate acid mine drainage and explain observed…

  4. 49 CFR 192.189 - Vaults: Drainage and waterproofing.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Vaults: Drainage and waterproofing. 192.189 Section 192.189 Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND... Components § 192.189 Vaults: Drainage and waterproofing. (a) Each vault must be designed so as to...

  5. 7 CFR 1924.108 - Grading and drainage.

    Science.gov (United States)

    2010-01-01

    .... In questionable or unsurveyed areas, the applicant or developer will provide an engineering report... affect the structure and show proposed solutions. Grading will promote drainage of surface water away from buildings and foundations, minimize earth settlement and erosion, and assure that drainage...

  6. Conceptual design report for site drainage control

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, M.R.

    1996-07-01

    The Mound Plant (Mound), located in Miamisburg, Ohio, is a Department of Energy (DOE) development and production facility performing support work for DOE`s weapons and energy-related programs. EG&G Mound Applied Technologies, Inc. (EG&G) is the Operating Contractor (OC) for this Government-Owned, Contractor-Operated (GOCO) facility. The work performed at Mound emphasizes nuclear energy and explosives technology. Mound is currently implementing an Environmental, Safety & Health (ES&H) Upgrades Program designed to protect its employees, the public, and the environment from adverse effects caused by facility activities. The first project of this multiphase program is now in the final stages of construction, and the second project is currently under design. Four additional projects, one of which is presented in this report, are in the conceptual design stage. At Mound, 22 soil zones have become contaminated with radioactive material. These zones cover approximately 20 percent of the total area of developed property at the site. During a storm event, the rainwater washes contaminated soil from these zones into the storm sewer system. These radioactive contaminants may then be discharged along with the stormwater into the Great Miami River via the Miami Erie Canal. This conceptual design report (CDR), Site Drainage Control, the fourth project in the ES&H program, describes a project that will provide improvements and much needed repairs to inadequate and deteriorating portions of the storm drainage system on the developed property. The project also will provide a stormwater retention facility capable of storing the stormwater runoff, from the developed property, resulting from a 100-year storm event. These improvements will permit the effective control and monitoring of stormwater to prevent the spread of radioactive contaminants from contaminated soil zones and will provide a means to collect and contain accidental spills of hazardous substances.

  7. Sulphates Removal from Acid Mine Drainage

    Science.gov (United States)

    Luptáková, Alena; Mačingová, Eva; Kotuličová, Ingrida; Rudzanová, Dominika

    2016-10-01

    Acid mine drainage (AMD) are a worldwide problem leading to ecological destruction in river basins and the contamination of water sources. AMD are characterized by low pH and high content of heavy metals and sulphates. In order to minimize negative impacts of AMD appropriate treatment techniques has to be chosen. Treatment processes are focused on neutralizing, stabilizing and removing pollutants. From this reason efficient and environmental friendly methods are needed to be developed in order to reduce heavy metals as well as sulphates. Various methods are used for remediation of acid mine drainage, but any of them have been applied under commercial-scale conditions. Their application depends on geochemical, technical, natural, financial, and other factors. The aim of the present work was to interpret the study of biological methods for sulphates removal from AMD out-flowing from the shaft Pech of the deposit Smolmk in Slovak Republic. In the experimental works AMD were used after removal of heavy metals by precipitation and sorption using the synthetic sorbent Slovakite. The base of the studied method for the sulphates elimination was the anaerobic bacterial sulphate reduction using sulphate-reducing bacteria (SRB) genera Desulfovibrio. SRB represent a group of bacteria that uses sulphates as a terminal electron acceptor for their metabolism. These bacteria realize the conversion of sulphate to hydrogen sulphide under anaerobic conditions. For the purposes of experiments a few variants of the selective medium DSM-63 culture media were used in term of the sulphates and sodium lactate contents in the selective medium as well as sulphates in the studied AMD.

  8. Microbial decontamination of uranium mine drainage

    Energy Technology Data Exchange (ETDEWEB)

    Hard, B.C.; Babel, W. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Leipzig (Germany)

    2001-07-01

    One of the problems one is faced with when uranium mines are closed is the decontamination of acid mine drainage (AMD) from tailings and flooding of the underground mines. The high concentrations of sulfates and metals in mining water make it impossible to dispose of the water into rivers without having to decontaminate it first. A bioremediation process is proposed in which sulfate-reducing bacteria are used to remove metals, neutralize the water and reduce the sulfate concentrations. Methylotrophic sulfate-reducing strains have been isolated which can be used in such a process. Lab scale experiments with different reactor types were carried out in order to find the optimum design for this bioremediation process. Comparisons were made between methanol and other electron donors with regards to their suitability as substrate for this process. Methanol was found to be most suited. Laboratory data suggest that immobilizing the bacteria on pumice particles increases the sulfate-reduction rate (SRR) up to three fold to 18 mg/l.h, compared to the rates of free flowing cells of between 3.7 and 6.8 mg/l.h. Preliminary experiments on a larger scale (15 l) using acid mine drainage pH 2.5 show SRR of 0.71 mg/l.h. In biosorption experiments up to 140 mg of aluminium per g biomass was removed from the water. One strain was found to reduce uranium VI, thus changing it from the soluble to the insoluble form. The application of the proposed process with regards to bioremediation of AMD are discussed. (orig.)

  9. On the effectiveness of dry drainage in soil salinity control

    Institute of Scientific and Technical Information of China (English)

    WU JingWei; ZHAO LiRong; HUANG JieSheng; YANG JinZhong; VINCENT Bernard; BOUARFA Sami; VIDAL Alain

    2009-01-01

    Dry drainage is thought to be a potential approach to control soil salinity.This study took the Hetao Irrigation District as an example and evaluated the effectiveness of dry drainage by using remote sensing, a conceptual model and a field experiment.Archived remote sensing images from 1973-2006 were used to delineate the temporal and spatial change of soil salinity.The conceptual water and salt balance model was used to evaluate the role of dry drainage in removing excess salt from the irrigated land.The field experiment was performed to get field validation and give more accurate estimation.The results show that dry drainage did contribute to remove excess salt from the irrigated land and succeed in controlling soil salinity in the Hetao Irrigation District.it can be taken as an alternative approach in (semi-)arid area where artificial drainage is not applicable.

  10. On the effectiveness of dry drainage in soil salinity control

    Institute of Scientific and Technical Information of China (English)

    VINCENT; Bernard; BOUARFA; Sami; VIDAL; Alain

    2009-01-01

    Dry drainage is thought to be a potential approach to control soil salinity. This study took the Hetao Irrigation District as an example and evaluated the effectiveness of dry drainage by using remote sensing, a conceptual model and a field experiment. Archived remote sensing images from 1973―2006 were used to delineate the temporal and spatial change of soil salinity. The conceptual water and salt balance model was used to evaluate the role of dry drainage in removing excess salt from the irrigated land. The field experiment was performed to get field validation and give more accurate estimation. The results show that dry drainage did contribute to remove excess salt from the irrigated land and succeed in controlling soil salinity in the Hetao Irrigation District. It can be taken as an alternative approach in (semi-)arid area where artificial drainage is not applicable.

  11. Treatment of drainage solution from hydroponic greenhouse production with microalgae.

    Science.gov (United States)

    Hultberg, Malin; Carlsson, Anders S; Gustafsson, Susanne

    2013-05-01

    This study investigated treatment of the drainage solution from greenhouse production with microalgae, through inoculation with Chlorella vulgaris or through growth of the indigenous microalgal community. A significant reduction in nitrogen, between 34.7 and 73.7 mg L(-1), and particularly in phosphorus concentration, between 15.4 and 15.9 mg L(-1), was observed in drainage solution collected from commercial greenhouse production. The large reduction in nutrients was achieved through growth of the indigenous microalgal community i.e., without pre-treatment of the drainage solution or inoculation with the fast growing green microalgae C. vulgaris. Analysis of the fatty acid composition of the algal biomass revealed that compared with a standard growth medium for green algae, the drainage solution was inferior for lipid production. Despite the biorefinery concept being less promising, microalgae-based treatment of drainage solution from greenhouse production is still of interest considering the urgent need for phosphorus recycling.

  12. Study of Plume Characteristics of a Stationary Plasma Thruster

    Institute of Scientific and Technical Information of China (English)

    QIAN Zhong; WANG Pingyang; DU Zhaohui; KANG Xiaolu

    2008-01-01

    Electron density and temperature of the plume are measured by a double Langmuir probe in an experimental chamber.A numerical model based on both particle-in-cell scheme and direct simulation Monte Carlo hybrid method is developed to simulate the flow field of plume.The equation for plasma potential is solved by alternative direction implicit technique. The simulation is verified by comparing the computational results with the measured data.The study indicates that the electron temperature of flow field is about 2 eV and the electron density is about 2.5 × 1016 ~ 5 × 1015 m-3 at the central line with a distance of 0.3 ~ 1.0 m downstream of the thruster exit.The model can well predict the flow field parameters of the steady plume.The efforts of this paper are referable for further investigation.

  13. An analytical and experimental investigation of resistojet plumes

    Science.gov (United States)

    Zana, Lynnette M.; Hoffman, David J.; Breyley, Loranell R.; Serafini, John S.

    1987-01-01

    As a part of the electrothermal propulsion plume research program at the NASA Lewis Research Center, efforts have been initiated to analytically and experimentally investigate the plumes of resistojet thrusters. The method of Simons for the prediction of rocket exhaust plumes is developed for the resistojet. Modifications are made to the source flow equations to account for the increased effects of the relatively large nozzle boundary layer. Additionally, preliminary mass flux measurements of a laboratory resistojet using CO2 propellant at 298 K have been obtained with a cryogenically cooled quartz crystal microbalance (QCM). There is qualitative agreement between analysis and experiment, at least in terms of the overall number density shape functions in the forward flux region.

  14. Analyzing rocket plume spectral data with neural networks

    Science.gov (United States)

    Whitaker, Kevin W.; Krishnakumar, K. S.; Benzing, Daniel A.

    1995-01-01

    The Optical Plume Anomaly Detection (OPAD) system is under development to provide early-warning failure detection in support of ground-level testing of the Space Shuttle Main Engine (SSME). Failure detection is to be achieved through the acquisition of spectrally resolved plume emissions and subsequent identification of abnormal levels indicative of engine corrosion or component failure. Two computer codes (one linear and the other non-linear) are used by the OPAD system to iteratively determine specific element concentrations in the SSME plume, given emission intensity and wavelength information. Since this analysis is extremely labor intensive, a study was initiated to develop neural networks that would model the 'inverse' of these computer codes. Optimally connected feed-forward networks with imperceptible prediction error have been developed for each element modeled by the linear code, SPECTRA4. Radial basis function networks were developed for the non-linear code, SPECTRA5, and predict combustion temperature in addition to element concentrations.

  15. Analyzing rocket plume spectral data with neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Whitaker, K.W.; Krishnakumar, K.S.; Benzing, D.A.

    1995-09-01

    The Optical Plume Anomaly Detection (OPAD) system is under development to provide early-warning failure detection in support of ground-level testing of the Space Shuttle Main Engine (SSME). Failure detection is to be achieved through the acquisition of spectrally resolved plume emissions and subsequent identification of abnormal levels indicative of engine corrosion or component failure. Two computer codes (one linear and the other non-linear) are used by the OPAD system to iteratively determine specific element concentrations in the SSME plume, given emission intensity and wavelength information. Since this analysis is extremely labor intensive, a study was initiated to develop neural networks that would model the `inverse` of these computer codes. Optimally connected feed-forward networks with imperceptible prediction error have been developed for each element modeled by the linear code, SPECTRA4. Radial basis function networks were developed for the non-linear code, SPECTRA5, and predict combustion temperature in addition to element concentrations.

  16. Turbulent Boyant Jets and Plumes in Flowing Ambient Environments

    DEFF Research Database (Denmark)

    Chen, Hai-Bo

    Turbulent buoyant jets and plumes in flowing ambient environments have been studied theoretically and experimentally. The mechanics of turbulent buoyant jets and plumes in flowing ambients have been discussed. Dimensional analysis was employed to investigate the mean behaviour of the turbulent...... and the stage of plume. The stability criteria for the upstream wedge created by the submerged turbulent buoyant jet were established by applying the Bernoulli equations for a two-dimensional problem and by considering the front velocity driven by the buoyancy force for a three-dimensional problem...... in a crossflowing environment, have been presented and successfully correlated using momentum and buoyancy fluxes and length scales. The analysis demonstrates that the experimental data on the jet trajectories and dilutions can be well correlated using the momentum or buoyancy fluxes and length scales, depending...

  17. Analyzing rocket plume spectral data with neural networks

    Science.gov (United States)

    Whitaker, Kevin W.; Krishnakumar, K. S.; Benzing, Daniel A.

    The Optical Plume Anomaly Detection (OPAD) system is under development to provide early-warning failure detection in support of ground-level testing of the Space Shuttle Main Engine (SSME). Failure detection is to be achieved through the acquisition of spectrally resolved plume emissions and subsequent identification of abnormal levels indicative of engine corrosion or component failure. Two computer codes (one linear and the other non-linear) are used by the OPAD system to iteratively determine specific element concentrations in the SSME plume, given emission intensity and wavelength information. Since this analysis is extremely labor intensive, a study was initiated to develop neural networks that would model the 'inverse' of these computer codes. Optimally connected feed-forward networks with imperceptible prediction error have been developed for each element modeled by the linear code, SPECTRA4. Radial basis function networks were developed for the non-linear code, SPECTRA5, and predict combustion temperature in addition to element concentrations.

  18. Electrical charging of ash in Icelandic volcanic plumes

    CERN Document Server

    Aplin, Karen L; Nicoll, Keri A

    2014-01-01

    The existence of volcanic lightning and alteration of the atmospheric potential gradient in the vicinity of near-vent volcanic plumes provides strong evidence for the charging of volcanic ash. More subtle electrical effects are also visible in balloon soundings of distal volcanic plumes. Near the vent, some proposed charging mechanisms are fractoemission, triboelectrification, and the so-called "dirty thunderstorm" mechanism, which is where ash and convective clouds interact electrically to enhance charging. Distant from the vent, a self-charging mechanism, probably triboelectrification, has been suggested to explain the sustained low levels of charge observed on a distal plume. Recent research by Houghton et al. (2013) linked the self-charging of volcanic ash to the properties of the particle size distribution, observing that a highly polydisperse ash distribution would charge more effectively than a monodisperse one. Natural radioactivity in some volcanic ash could also contribute to self-charging of volcan...

  19. SSME Condition Monitoring Using Neural Networks and Plume Spectral Signatures

    Science.gov (United States)

    Hopkins, Randall; Benzing, Daniel

    1996-01-01

    For a variety of reasons, condition monitoring of the Space Shuttle Main Engine (SSME) has become an important concern for both ground tests and in-flight operation. The complexities of the SSME suggest that active, real-time condition monitoring should be performed to avoid large-scale or catastrophic failure of the engine. In 1986, the SSME became the subject of a plume emission spectroscopy project at NASA's Marshall Space Flight Center (MSFC). Since then, plume emission spectroscopy has recorded many nominal tests and the qualitative spectral features of the SSME plume are now well established. Significant discoveries made with both wide-band and narrow-band plume emission spectroscopy systems led MSFC to develop the Optical Plume Anomaly Detection (OPAD) system. The OPAD system is designed to provide condition monitoring of the SSME during ground-level testing. The operational health of the engine is achieved through the acquisition of spectrally resolved plume emissions and the subsequent identification of abnormal emission levels in the plume indicative of engine erosion or component failure. Eventually, OPAD, or a derivative of the technology, could find its way on to an actual space vehicle and provide in-flight engine condition monitoring. This technology step, however, will require miniaturized hardware capable of processing plume spectral data in real-time. An objective of OPAD condition monitoring is to determine how much of an element is present in the SSME plume. The basic premise is that by knowing the element and its concentration, this could be related back to the health of components within the engine. For example, an abnormal amount of silver in the plume might signify increased wear or deterioration of a particular bearing in the engine. Once an anomaly is identified, the engine could be shut down before catastrophic failure occurs. Currently, element concentrations in the plume are determined iteratively with the help of a non-linear computer

  20. Cassini detection of Enceladus' cold water-group plume ionosphere

    Science.gov (United States)

    Tokar, R. L.; Johnson, R. E.; Thomsen, M. F.; Wilson, R. J.; Young, D. T.; Crary, F. J.; Coates, A. J.; Jones, G. H.; Paty, C. S.

    2009-07-01

    This study reports direct detection by the Cassini plasma spectrometer of freshly-produced water-group ions (O+, OH+, H2O+, H3O+) and heavier water dimer ions (HxO2)+ very close to Enceladus where the plasma begins to emerge from the plume. The data were obtained during two close (52 and 25 km) flybys of Enceladus in 2008 and are similar to ion data in cometary comas. The ions are observed in detectors looking in the Cassini ram direction exhibiting energies consistent with the Cassini speed, indicative of a nearly stagnant plasma flow in the plume. North of Enceladus the plasma slowing commences about 4 to 6 Enceladus radii away, while south of Enceladus signatures of the plasma interaction with the plume are detected 22 Enceladus radii away.

  1. Tidally induced lateral dispersion of the Storfjorden overflow plume

    Directory of Open Access Journals (Sweden)

    F. Wobus

    2013-10-01

    Full Text Available We investigate the flow of brine-enriched shelf water from Storfjorden (Svalbard into Fram Strait and onto the western Svalbard Shelf using a regional set-up of NEMO-SHELF, a 3-D numerical ocean circulation model. The model is set up with realistic bathymetry, atmospheric forcing, open boundary conditions and tides. The model has 3 km horizontal resolution and 50 vertical levels in the sh-coordinate system which is specially designed to resolve bottom boundary layer processes. In a series of modelling experiments we focus on the influence of tides on the propagation of the dense water plume by comparing results from tidal and non-tidal model runs. Comparisons of non-tidal to tidal simulations reveal a hotspot of tidally induced horizontal diffusion leading to the lateral dispersion of the plume at the southernmost headland of Spitsbergen which is in close proximity to the plume path. As a result the lighter fractions in the diluted upper layer of the plume are drawn into the shallow coastal current that carries Storfjorden water onto the western Svalbard Shelf, while the dense bottom layer continues to sink down the slope. This bifurcation of the plume into a diluted shelf branch and a dense downslope branch is enhanced by tidally induced shear dispersion at the headland. Tidal effects at the headland are shown to cause a net reduction in the downslope flux of Storfjorden water into the deep Fram Strait. This finding contrasts previous results from observations of a dense plume on a different shelf without abrupt topography.

  2. Satellite detection of wastewater diversion plumes in Southern California

    Science.gov (United States)

    Gierach, Michelle M.; Holt, Benjamin; Trinh, Rebecca; Jack Pan, B.; Rains, Christine

    2017-02-01

    Multi-sensor satellite observations proved useful in detecting surfacing wastewater plumes during the 2006 Hyperion Treatment Plant (HTP) and 2012 Orange County Sanitation District (OCSD) wastewater diversion events in Southern California. Satellite sensors were capable of detecting biophysical signatures associated with the wastewater, compared to ambient ocean waters, enabling monitoring of environmental impacts over a greater spatial extent than in situ sampling alone. Thermal satellite sensors measured decreased sea surface temperatures (SSTs) associated with the surfacing plumes. Ocean color satellite sensors did not measure a distinguishable biological response in terms of chlorophyll-a (chl-a) concentrations during the short lived, three-day long, 2006 HTP diversion. A period of decreased chl-a concentration was observed during the three-week long 2012 OCSD diversion, likely in association with enhanced chlorination of the discharged wastewater that suppressed the phytoplankton response and/or significant uptake by heterotrophic bacteria. Synthetic aperture radar (SAR) satellite data were able to identify and track the 2006 HTP wastewater plume through changes in surface roughness related to the oily components of the treated surfacing wastewater. Overall, it was found that chl-a and SST values must have differences of at least 1 mg m-3 and 0.5 °C, respectively, in comparison with adjacent waters for wastewater plumes and their biophysical impact to be detectable from satellite. For a wastewater plume to be identifiable in SAR imagery, wind speeds must range between ∼3 and 8 m s-1. The findings of this study illustrate the benefit of utilizing multiple satellite sensors to monitor the rapidly changing environmental response to surfacing wastewater plumes, and can help inform future wastewater diversions in coastal areas.

  3. IASI measurements of reactive trace species in biomass burning plumes

    Directory of Open Access Journals (Sweden)

    P.-F. Coheur

    2009-08-01

    Full Text Available This work presents observations of a series of short-lived species in biomass burning plumes from the Infrared Atmospheric Sounding Interferometer (IASI, launched onboard the MetOp-A platform in October 2006. The strong fires that have occurred in the Mediterranean Basin – and particularly Greece – in August 2007, and those in Southern Siberia and Eastern Mongolia in the early spring of 2008 are selected to support the analyses. We show that the IASI infrared spectra in these fire plumes contain distinctive signatures of ammonia (NH3, ethene (C2H4, methanol (CH3OH and formic acid (HCOOH in the atmospheric window between 800 and 1200 cm−1, with some noticeable differences between the plumes. Peroxyacetyl nitrate (CH3COOONO2, abbreviated as PAN was also observed with good confidence in some plumes and a tentative assignment of a broadband absorption spectral feature to acetic acid (CH3COOH is made. For several of these species these are the first reported measurements made from space in nadir geometry. The IASI measurements are analyzed for plume height and concentration distributions of NH3, C2H4 and CH3OH. The Greek fires are studied in greater detail for the days associated with the largest emissions. In addition to providing information on the spatial extent of the plume, the IASI retrievals allow an estimate of the total mass emissions for NH3, C2H4 and CH3OH. Enhancement ratios are calculated for the latter relative to carbon monoxide (CO, giving insight in the chemical processes occurring during the transport, the first day after the emission.

  4. Aerosol nucleation in coal-fired power-plant plumes

    Science.gov (United States)

    Stevens, Robin; Lonsdale, Chantelle; Brock, Charles; Makar, Paul; Knipping, Eladio; Reed, Molly; Crawford, James; Holloway, John; Ryerson, Tim; Huey, L. Greg; Nowak, John; Pierce, Jeffrey

    2013-05-01

    New-particle nucleation within coal-fired power-plant plumes can have large effects on particle number concentrations, particularly near source regions, with implications for human health and climate. In order to resolve the formation and growth of particles in these plumes, we have integrated TwO-Moment Aerosol Sectional (TOMAS) microphysics in the System for Atmospheric Modelling (SAM), a large-eddy simulation/cloud-resolving model (LES/CRM). We have evaluated this model against aircraft observations for three case studies, and the model reproduces well the major features of each case. Using this model, we have shown that meteorology and background aerosol concentrations can have strong effects on new-particle formation and growth in coal-fired power-plant plumes, even if emissions are held constant. We subsequently used the model to evaluate the effects of SO2 and NOx pollution controls on newparticle formation in coal-fired power-plant plumes. We found that strong reductions in NOx emissions without concurrent reductions in SO2 emissions may increase new-particle formation, due to increases in OH formation within the plume. We predicted the change in new-particle formation due to changes in emissions between 1997 and 2010 for 330 coal-fired power plants in the US, and we found a median decrease of 19% in new-particle formation. However, the magnitude and sign of the aerosol changes depend greatly on the relative reductions in NOx and SO2 emissions in each plant. More extensive plume measurements for a range of emissions of SO2 and NOx and in varying background aerosol conditions are needed, however, to better quantify these effects.

  5. Unilobar versus bilobar biliary drainage: effect on quality of life and bilirubin level reduction

    Directory of Open Access Journals (Sweden)

    Shivanand Gamanagatti

    2016-01-01

    Conclusion: Percutaneous biliary drainage provides good palliation of malignant obstructive jaundice. Partial-liver drainage achieved results as good as those after complete liver drainage with significant improvements in QOL and reduction of the bilirubin level.

  6. Preliminary results from agricultural drainage water management CIG projects on Ohio

    Science.gov (United States)

    Field demonstrations were monitored to compare the crop yields, drainage discharge, and nutrient loadings to streams from managed and unmanaged subsurface drainage systems. Paired drainage systems within the same field, under similar soil, area, cropping, and management conditions, were identified. ...

  7. Influence of bubble size, diffuser width, and flow rate on the integral behavior of bubble plumes

    Science.gov (United States)

    Fraga, Bruño.; Stoesser, Thorsten

    2016-06-01

    A large-eddy simulation based Eulerian-Lagrangian model is employed to quantify the impact of bubble size, diffuser diameter, and gas flow rate on integral properties of bubble plumes, such as the plume's width, centerline velocity, and mass flux. Calculated quantities are compared with experimental data and integral model predictions. Furthermore, the LES data were used to assess the behavior of the entrainment coefficient, the momentum amplification factor, and the bubble-to-momentum spread ratio. It is found that bubble plumes with constant bubble size and smaller diameter behave in accordance with integral plume models. Plumes comprising larger and non-uniform bubble sizes appear to deviate from past observations and model predictions. In multi-diameter bubble plumes, a bubble self-organisation takes place, i.e., small bubbles cluster in the center of the plume whilst large bubbles are found at the periphery of the plume. Multi-diameter bubble plumes also feature a greater entrainment rate than single-size bubble plumes, as well as a higher spread ratio and lower turbulent momentum rate. Once the plume is fully established, the size of the diffuser does not appear to affect integral properties of bubble plumes. However, plume development is affected by the diffuser width, as larger release areas lead to a delayed asymptotic behavior of the plume and consequently to a lower entrainment and higher spread ratio. Finally, the effect of the gas flow rate on the integral plume is studied and is deemed very relevant with regards to most integral plume properties and coefficients. This effect is already fairly well described by integral plume models.

  8. Exposure estimates using urban plume dispersion and traffic microsimulation models

    Energy Technology Data Exchange (ETDEWEB)

    Brown, M.J.; Mueller, C.; Bush, B.; Stretz, P.

    1997-12-01

    The goal of this research effort was to demonstrate a capability for analyzing emergency response issues resulting from accidental or mediated airborne toxic releases in an urban setting. In the first year of the program, the authors linked a system of fluid dynamics, plume dispersion, and vehicle transportation models developed at Los Alamos National Laboratory to study the dispersion of a plume in an urban setting and the resulting exposures to vehicle traffic. This research is part of a larger laboratory-directed research and development project for studying the relationships between urban infrastructure elements and natural systems.

  9. Odor identity influences tracking of temporally patterned plumes in Drosophila

    Directory of Open Access Journals (Sweden)

    Frye Mark A

    2011-06-01

    Full Text Available Abstract Background Turbulent fluid landscapes impose temporal patterning upon chemical signals, and the dynamical neuronal responses to patterned input vary across the olfactory receptor repertoire in flies, moths, and locusts. Sensory transformations exhibit low pass filtering that ultimately results in perceptual fusion of temporally transient sensory signals. For example, humans perceive a sufficiently fast flickering light as continuous, but the frequency threshold at which this fusion occurs varies with wavelength. Although the summed frequency sensitivity of the fly antenna has been examined to a considerable extent, it is unknown how intermittent odor signals are integrated to influence plume tracking behavior independent of wind cues, and whether temporal fusion for behavioral tracking might vary according to the odor encountered. Results Here we have adopted a virtual reality flight simulator to study the dynamics of plume tracking under different experimental conditions. Flies tethered in a magnetic field actively track continuous (non-intermittent plumes of vinegar, banana, or ethyl butyrate with equal precision. However, pulsing these plumes at varying frequency reveals that the threshold rate, above which flies track the plume as if it were continuous, is unique for each odorant tested. Thus, the capability of a fly to navigate an intermittent plume depends on the particular odorant being tracked during flight. Finally, we measured antennal field potential responses to an intermittent plume, found that receptor dynamics track the temporal pattern of the odor stimulus and therefore do not limit the observed behavioral temporal fusion limits. Conclusions This study explores the flies' ability to track odor plumes that are temporally intermittent. We were surprised to find that the perceptual critical fusion limit, determined behaviorally, is strongly dependent on odor identity. Antennal field potential recordings indicate that

  10. Plume Mitigation: Soil Erosion and Lunar Prospecting Sensor Project

    Science.gov (United States)

    Metzger, Philip T.

    2014-01-01

    Demonstrate feasibility of the simplest, lowest-mass method of measuring density of a cloud of lunar soil ejected by rocket exhaust, using new math techniques with a small baseline laser/camera system. Focus is on exploring the erosion process that occurs when the exhaust plume of a lunar rocket impacts the regolith. Also, predicting the behavior of the lunar soil that would be blasted from a lunar landing/launch site shall assist in better design and protection of any future lunar settlement from scouring of structures and equipment. NASA is gathering experimental data to improve soil erosion models and understand how lunar particles enter the plume flow.

  11. Anatomy of mantle plumes: hot heads and cold stems

    Science.gov (United States)

    Davaille, A. B.; Kumagai, I.; Vatteville, J.; Touitou, F.; Brandeis, G.

    2012-12-01

    Recent petrological studies show evidences for secular cooling in mantle plumes: the source temperature of oceanic plateaus could be 100°C hotter than the source temperature of volcanic island chains (Herzberg and Gazel, Nature, 2009). In terms of mantle plumes, it would mean that the temperature of the plume head is hotter than that of the plume stem. This is at odd with a model where a plume head would entrain so much ambient mantle on its journey towards the Earth's surface that it would end up being considerably colder than its narrow stem. So we revisited the problem using laboratory experiments and new visualization techniques to measure in situ simultaneously the temperature, velocity and composition fields. At time t=0, a hot instability is created by heating a patch of a given radius at constant power or constant temperature. The fluids are mixtures of sugar syrups , with a strongly temperature-dependent viscosity, and salt. Rayleigh numbers were varied from 104 to 108, viscosity ratios between 1.8 and 4000, and buoyancy ratios between 0 and 2. After a stage where heat transport is by conduction only, the hot fluid gathers in a sphere and begins to rise, followed by a stem anchored on the hot patch. In all cases, temperatures in the head start with higher values than in the subsequent stem. This is also the case for the thermal instabilities rising from a infinite plate heated uniformly. However, the head also cools faster than the stem as they rise, so that they will eventually have the same temperature if the mantle is deep enough. Moreover, all the material sampled by partial melting in the plume head or stem would be coming from the heated area around the deep source, and very little entrainment from the ambient mantle is predicted. The difference in temperature between head and stem strongly depends on the mantle depth, the viscosity ratio and the buoyancy ratio. Our scaling laws predict that Earth's mantle plumes can indeed have hot heads and colder

  12. Redox zones of a landfill leachate pollution plume (Vejen, Denmark)

    DEFF Research Database (Denmark)

    Lyngkilde, John; Christensen, Thomas Højlund

    1992-01-01

    Downgradient from an old municipal landfill allowing leachate, rich in dissolved organic carbon, to enter a shallow sandy aerobic aquifer, a sequence of redoxe zones is identified from groundwater chemical analysis. Below the landfill, methanogenic conditions prevail, followed by sulfidogenic......, ferrogenic, nitrate-reducing and aerobic environments overa distance of 370 m. This redox zone sequence is consistent with thermodynamical principles and is closely matched by the leachate plume determined by the chloride plume distribution. The redox zone sequence is believed to be key in controlling...

  13. Mixing between a stratospheric intrusion and a biomass burning plume

    Directory of Open Access Journals (Sweden)

    J. Brioude

    2007-08-01

    Full Text Available Ozone, carbon monoxide, aerosol extinction coefficient, acetonitrile, nitric acid and relative humidity measured from the NOAA P3 aircraft during the TexAQS/GoMACCS 2006 experiment, indicate mixing between a biomass burning plume and a stratospheric intrusion in the free troposphere above eastern Texas. Lagrangian-based transport analysis and satellite imagery are used to investigate the transport mechanisms that bring together the tropopause fold and the biomass burning plume originating in southern California, which may affect the chemical budget of tropospheric trace gases.

  14. Mixing between a stratospheric intrusion and a biomass burning plume

    Directory of Open Access Journals (Sweden)

    J. Brioude

    2007-06-01

    Full Text Available Ozone, carbon monoxide, aerosol extinction coefficient, acetonitrile, nitric acid and relative humidity measured from the NOAA P3 aircraft during the TexAQS/GoMACCS 2006 experiment, indicate mixing between a biomass burning plume and a stratospheric intrusion in the free troposphere above eastern Texas. Lagrangian-based transport analysis and satellite imagery are used to investigate the transport mechanisms that bring together the tropopause fold and the biomass burning plume originating in southern California, which may affect the chemical budget of tropospheric trace gases.

  15. Polar plumes dynamics observed during total solar eclipses

    Science.gov (United States)

    Barczynski, K.; Bělík, M.; Marková, E.

    2010-12-01

    Following the successful observation of significant activity in the polar plume during the total solar eclipse in 2006, the analysis of the Sun's polar regions was also carried out in the images obtained in multi-station observations of the eclipse of 2008. In this work polar plumes showing similar although much less significant manifestation of the dynamics have been identified. The dynamics evolution rates have been obtained from comparing the pictures taken at different times. The results are compared with the corresponding phenomena observed in X-rays from the HINODE satellite.

  16. Assessment of analytical techniques for predicting solid propellant exhaust plumes

    Science.gov (United States)

    Tevepaugh, J. A.; Smith, S. D.; Penny, M. M.

    1977-01-01

    The calculation of solid propellant exhaust plume flow fields is addressed. Two major areas covered are: (1) the applicability of empirical data currently available to define particle drag coefficients, heat transfer coefficients, mean particle size and particle size distributions, and (2) thermochemical modeling of the gaseous phase of the flow field. Comparisons of experimentally measured and analytically predicted data are made. The experimental data were obtained for subscale solid propellant motors with aluminum loadings of 2, 10 and 15%. Analytical predictions were made using a fully coupled two-phase numerical solution. Data comparisons will be presented for radial distributions at plume axial stations of 5, 12, 16 and 20 diameters.

  17. Electron loss rates from the outer radiation belt caused by the filling of the outer plasmasphere: the calm before the storm

    Energy Technology Data Exchange (ETDEWEB)

    Borovsky, Joseph E [Los Alamos National Laboratory; Denton, Michael H [LANCASTER UNIV

    2009-01-01

    Measurements from 7 spacecraft in geosynchronous orbit are analyzed to determine the decay rate of the number density of the outer electron radiation belt prior to the onset of high-speed-stream-driven geomagnetic storms. Superposed-data analysis is used wan(?) a collection of 124 storms. When there is a calm before the storm, the electron number density decays exponentially before the storm with a 3.4-day e-folding time: beginning about 4 days before storm onset, the density decreases from {approx}4x10{sup -4} cm{sup -3} to {approx}1X 10{sup -4} cm{sup -3}. When there is not a calm before the storm, the number-density decay is very smalL The decay in the number density of radiation-belt electrons is believed to be caused by pitch-angle scattering of electrons into the atmospheric loss cone as the outer plasmasphere fills during the calms. While the radiation-belt electron density decreases, the temperature of the electron radiation belt holds approximately constant, indicating that the electron precipitation occurs equally at all energies. Along with the number density decay, the pressure of the outer electron radiation belt decays and the specific entropy increases. From the measured decay rates, the electron flux to the atmosphere is calculated and that flux is 3 orders of magnitude less than thermal fluxes in the magnetosphere, indicating that the radiation-belt pitch-angle scattering is 3 orders weaker than strong diffusion. Energy fluxes into the atmosphere are calculated and found to be insufficient to produce visible airglow.

  18. STUDIES OF TWO-PHASE PLUMES IN STRATIFIED ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Scott A. Socolofsky; Brian C. Crounse; E. Eric Adams

    1998-11-18

    Two-phase plumes play an important role in the more practical scenarios for ocean sequestration of CO{sub 2}--i.e. dispersing CO{sub 2} as a buoyant liquid from either a bottom-mounted or ship-towed pipeline. Despite much research on related applications, such as for reservoir destratification using bubble plumes, our understanding of these flows is incomplete, especially concerning the phenomenon of plume peeling in a stratified ambient. To address this deficiency, we have built a laboratory facility in which we can make fundamental measurements of plume behavior. Although we are using air, oil and sediments as our sources of buoyancy (rather than CO{sub 2}), by using models, our results can be directly applied to field scale CO{sub 2} releases to help us design better CO{sub 2} injection systems, as well as plan and interpret the results of our up-coming international field experiment. The experimental facility designed to study two-phase plume behavior similar to that of an ocean CO{sub 2} release includes the following components: 1.22 x 1.22 x 2.44 m tall glass walled tank; Tanks and piping for the two-tank stratification method for producing step- and linearly-stratified ambient conditions; Density profiling system using a conductivity and temperature probe mounted to an automated depth profiler; Lighting systems, including a virtual point source light for shadowgraphs and a 6 W argon-ion laser for laser induced fluorescence (LIF) imaging; Imaging system, including a digital, progressive scanning CCD camera, computerized framegrabber, and image acquisition and analysis software; Buoyancy source diffusers having four different air diffusers, two oil diffusers, and a planned sediment diffuser; Dye injection method using a Mariotte bottle and a collar diffuser; and Systems integration software using the Labview graphical programming language and Windows NT. In comparison with previously reported experiments, this system allows us to extend the parameter range of

  19. 77 FR 4614 - Culturally Significant Objects Imported for Exhibition Determinations: “Children of the Plumed...

    Science.gov (United States)

    2012-01-30

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF STATE Culturally Significant Objects Imported for Exhibition Determinations: ``Children of the Plumed Serpent: The... exhibition ``Children of the Plumed Serpent: The Legacy of Quetzalcoatl in Ancient Mexico,'' imported...

  20. The impact of glacier geometry on meltwater plume structure and submarine melt in Greenland fjords

    NARCIS (Netherlands)

    Carroll, D.; Sutherland, D. A.; Hudson, B.; Moon, T.; Catania, G. A.; Shroyer, E. L.; Nash, J. D.; Bartholomaus, T. C.; Felikson, D.; Stearns, L. A.; Noël, B. P Y|info:eu-repo/dai/nl/370612345; van den Broeke, M. R.|info:eu-repo/dai/nl/073765643

    2016-01-01

    Meltwater from the Greenland Ice Sheet often drains subglacially into fjords, driving upwelling plumes at glacier termini. Ocean models and observations of submarine termini suggest that plumes enhance melt and undercutting, leading to calving and potential glacier destabilization. Here we

  1. The He isotope composition of the earliest picrites erupted by the Ethiopia plume, implications for mantle plume source

    Science.gov (United States)

    Stuart, Finlay; Rogers, Nick; Davies, Marc

    2016-04-01

    The earliest basalts erupted by mantle plumes are Mg-rich, and typically derived from mantle with higher potential temperature than those derived from the convecting upper mantle at mid-ocean ridges and ocean islands. The chemistry and isotopic composition of picrites from CFB provide constraints on the composition of deep Earth and thus the origin and differentiation history. We report new He-Sr-Nd-Pb isotopic composition of the picrites from the Ethiopian flood basalt province from the Dilb (Chinese Road) section. They are characterized by high Fe and Ti contents for MgO = 10-22 wt. % implying that the parent magma was derived from a high temperature low melt fraction, most probably from the Afar plume head. The picrite 3He/4He does not exceed 21 Ra, and there is a negative correlation with MgO, the highest 3He/4He corresponding to MgO = 15.4 wt. %. Age-corrected 87Sr/86Sr (0.70392-0.70408) and 143Nd/144Nd (0.512912-0.512987) display little variation and are distinct from MORB and OIB. Age-corrected Pb isotopes display a significant range (e.g. 206Pb/204Pb = 18.70-19.04) and plot above the NHRL. These values contrast with estimates of the modern Afar mantle plume which has lower 3He/4He and Sr, Nd and Pb isotope ratios that are more comparable with typical OIB. These results imply either interaction between melts derived from the Afar mantle plume and a lithospheric component, or that the original Afar mantle plume had a rather unique radiogenic isotope composition. Regardless of the details of the origins of this unusual signal, our observations place a minimum 3He/4He value of 21 Ra for the Afar mantle plume, significantly greater than the present day value of 16 Ra, implying a significant reduction over 30 Myr. In addition the Afar source was less degassed than convecting mantle but more degassed than mantle sampled by the proto-Iceland plume (3He/4He ~50 Ra). This suggests that the largest mantle plumes are not sourced in a single deep mantle domain with a

  2. Comparison of Methane Drainage Methods Used in Polish Coal Mines

    Science.gov (United States)

    Szlązak, Nikodem; Borowski, Marek; Obracaj, Dariusz; Swolkień, Justyna; Korzec, Marek

    2014-10-01

    Methane drainage is used in Polish coal mines in order to reduce mine methane emissions as well as to keep methane concentration in mine workings at safe levels. This article describes methods of methane drainage during mining used in Polish coal mines. The first method involves drilling boreholes from tailgate roadway to an unstressed zone in roof or floor layers of a mined seam. It is the main method used in Polish mining, where both the location of drilled boreholes as well as their parameters are dependent on mining and ventilation systems of longwalls. The second method is based on drilling overlying drainage galleries in seams situated under or over the mined seam. This article compares these methods with regard to their effectiveness under mining conditions in Polish mines. High effectiveness of methane drainage of longwalls with different ventilation and methane drainage systems has been proven. The highest effectiveness of methane drainage has been observed for the system with overlying drainage gallery and with the parallel tailgate roadways. In case of classic U ventilation system of longwall panel, boreholes drilled from the tailgate roadway behind the longwall front are lost.

  3. Systematic review comparing endoscopic, percutaneous and surgical pancreatic pseudocyst drainage

    Institute of Scientific and Technical Information of China (English)

    Anthony Yuen Bun Teoh; Vinay Dhir; Zhen-Dong Jin; Mitsuhiro Kida; Dong Wan Seo; Khek Yu Ho

    2016-01-01

    AIM: To perform a systematic review comparing the outcomes of endoscopic, percutaneous and surgical pancreatic pseudocyst drainage.METHODS: Comparative studies published between January 1980 and May 2014 were identified on Pub Med, Embase and the Cochrane controlled trials register and assessed for suitability of inclusion. The primary outcome was the treatment success rate. Secondary outcomes included were the recurrence rates, re-interventions, length of hospital stay, adverse events and mortalities.RESULTS: Ten comparative studies were identified and 3 were randomized controlled trials. Four studies reported on the outcomes of percutaneous and surgical drainage. Based on a large-scale national study, surgical drainage appeared to reduce mortality and adverse events rate as compared to the percutaneous approach. Three studies reported on the outcomes of endoscopic ultrasound(EUS) and surgical drainage. Clinical success and adverse events rates appeared to be comparable but the EUS approach reduced hospital stay, cost and improved quality of life. Three other studies comparedEUS and esophagogastroduodenoscopy-guided drainage. Both approaches were feasible for pseudocyst drainage but the success rate of the EUS approach was better for non-bulging cyst and the approach conferred additional safety benefits.CONCLUSION: In patients with unfavorable anatomy, surgical cystojejunostomy or percutaneous drainage could be considered. Large randomized studies with current definitions of pseudocysts and longer-term follow-up are needed to assess the efficacy of the various modalities.

  4. Technology of gas drainage and utilization in Huaibei mining area

    Institute of Scientific and Technical Information of China (English)

    LI Wei; XU Rui

    2009-01-01

    With the characteristics of coal seam geology and gas occurrence, a "ground-underground" integrated gas drainage method was formed, which can relieve gas pressure and increase permeability by mining the protection seams in conditional regions. After coal seam gas drainage, high gas outburst seam was converted to low gas safety seam. In the coal face mining process, safety and high efficient coal mining were realized by the measure of gas-suction over mining. In addition to the drainage gas for civil gas and gas power generation, the Huaibei Mining Group has actively carried out research on the utilization technology of methane drainage by ventilation. On the one hand, it can save precious energy; on the other hand, it can protect the environment for people's survival. In 2007, the amount of coal mine gas drainage was 120 hm3; the rate of coal mine gas drainage was 44%. Compared with the year 2002, the amount of coal mine gas drainage increased by two times. Meanwhile, the utilization rate of gas increased rapidly.

  5. Comparative experiments of gas drainage in different types of drillings

    Institute of Scientific and Technical Information of China (English)

    LI Cheng-wu; WEI Shan-yang; WANG Chuan; GAO Tian-bao; FU Yu-kai

    2012-01-01

    Gas drainage effect is the utmost important factor for mining speed and mining safety.It has great meaning to study the effect of gas drainage.Comparative experiment of gas drainage in different types of drillings shows that the initial rate of gas natural emission by hydraulic loosed cross drilling is 1.5 times more than that of parallel drilling,and the drilling gas attenuation coefficients reduces to 0.78 times,the effect of gas drainage is good.The ultimate quantity of gas drainage of parallel drilling,cross drilling,hydraulic loosed cross drilling are 859.1,1 323.5 and 1 833.6 m3/100 m.The results of the measurement through these three kinds of drillings of 100 meters drilling is considered as following:cross drilling is 1.54 times more than that of parallel drillings,hydraulic loosed cross drilling are 2.13 times more than parallel drilling.The drainage rate of parallel drilling,cross drilling and hydraulic loosed cross drilling reached 10% to 15% in 3 months with the pre-draining time.Among these,the drainage effect of hydraulic loosed cross drilling increased by 46% than that of parallel drilling in three months.

  6. The cold air drainage model KLAM_21

    Science.gov (United States)

    Kossmann, M.

    2010-09-01

    A brief description of the physics and numerical techniques of the cold air drainage model KLAM_21 is presented. The model has been developed by the Deutscher Wetterdienst (Sievers, 2005) for simulations of nocturnal airflow in hilly and mountainous terrain under dry fair weather conditions. The model has been widely used as an environmental consultancy tool. Typical model applications include frost protection (cold air ponding) and air quality (nocturnal ventilation). The single-layer model calculates the depth and the mean wind of a surface based stable layer that evolves from a neutrally stratified atmosphere during nighttime. The prediction of the velocity and direction of the cold air drainage is based on vertically averaged momentum tendency equations. Temporal changes in the total heat deficit in the cold air layer are calculated from a prescribed local heat loss rate (describing turbulent and radiative cooling) and advection (donor-cell algorithm). The depth of the cold air layer (depth of the surface based temperature inversion) is calculated diagnostically from the total heat loss deficit. The model is initialised with neutral stratification at sunset (onset time of nocturnal cooling). Optionally, effects of an ambient (regional) wind and/or the dispersion of a passive tracer can be simulated. Integration over time is carried out on a regular Arakawa C grid using dynamically calculated time steps. Spatial gradients are discretised using centred differential quotients. The standard size of the computational domains can reach up to 1500 x 1500 grid cells. Grid resolutions usually range between 10 m and 500 m. High resolution simulation can be limited to a nested inner grid domain, while the courser outer domain is covering the entire airshed of interest. A friendly user interface allows easy setup, control, and evaluation of model simulations. Some selected examples of KLAM_21 applications are shown to illustrate the features and capabilities of the model

  7. Environmental controls on drainage behavior of an ephemeral stream

    Science.gov (United States)

    Blasch, K.W.; Ferre, T. P. A.; Vrugt, J.A.

    2010-01-01

    Streambed drainage was measured at the cessation of 26 ephemeral streamflow events in Rillito Creek, Tucson, Arizona from August 2000 to June 2002 using buried time domain reflectometry (TDR) probes. An unusual drainage response was identified, which was characterized by sharp drainage from saturation to near field capacity at each depth with an increased delay between depths. We simulated the drainage response using a variably saturated numerical flow model representing a two-layer system with a high permeability layer overlying a lower permeability layer. Both the observed data and the numerical simulation show a strong correlation between the drainage velocity and the temperature of the stream water. A linear combination of temperature and the no-flow period preceding flow explained about 90% of the measured variations in drainage velocity. Evaluation of this correlative relationship with the one-dimensional numerical flow model showed that the observed temperature fluctuations could not reproduce the magnitude of variation in the observed drainage velocity. Instead, the model results indicated that flow duration exerts the most control on drainage velocity, with the drainage velocity decreasing nonlinearly with increasing flow duration. These findings suggest flow duration is a primary control of water availability for plant uptake in near surface sediments of an ephemeral stream, an important finding for estimating the ecological risk of natural or engineered changes to streamflow patterns. Correlative analyses of soil moisture data, although easy and widely used, can result in erroneous conclusions of hydrologic cause—effect relationships, and demonstrating the need for joint physically-based numerical modeling and data synthesis for hypothesis testing to support quantitative risk analysis.

  8. Separation of drainage runoff during rainfall-runoff episodes using the stable isotope method and drainage water temperature

    Science.gov (United States)

    Zajíček, Antonín; Kvítek, Tomáš; Pomije, Tomáš

    2014-05-01

    Stabile isotopes of 2H 18O and drainage water temperature were used as natural tracers for separation rainfall-runoff event hydrograph on several tile drained catchments located in Bohemian-Moravian Highland, Czech Republic. Small agricultural catchments with drainage systems built in slopes are typical for foothill areas in the Czech and Moravian highland. Often without permanent surface runoff, the drainage systems represent an important portion of runoff and nitrogen leaching out of the catchment. The knowledge of the drainage runoff formation and the origin of its components are prerequisites for formulation of measures leading to improvement of the drainage water quality and reduction of nutrient leaching from the drained catchments. The results have proved presence of event water in the drainage runoff during rainfall-runoff events. The proportion of event water observed in the drainage runoff varied between 15 - 60 % in the summer events and 0 - 50 % in winter events, while the sudden water temperature change was between 0,1 - 4,2 °C (2 - 35 %). The comparison of isotope separation of the drainage runoff and monitoring the drainage water temperature have demonstrated that in all cases of event water detected in the runoff, a rapid change in the drainage water temperature was observed as well. The portion of event water in the runoff grows with the growing change in water temperature. Using component mixing model, it was demonstrated that water temperature can be successfully used at least as a qualitative and with some degree of inaccuracy as a quantitative tracer as well. The drawback of the non-conservative character of this tracer is compensated by both its economic and technical accessibility. The separation results also resemble results of separations at small streams. Together with a similarly high speed of the discharge reaction to beginning of precipitation, it is obvious that the mechanism of surface runoff formation and drainage runoff formation

  9. Experimental Investigation of Two Interacting Thruster-Plumes Downstream of the Nozzles

    OpenAIRE

    Holz, André; Dettleff, Georg; Hannemann, Klaus; Ziegenhagen, Stefan

    2012-01-01

    The plume-plume interaction of two small cold gas thrusters is investigated under high vacuum conditions in the DLR high vacuum plume test facility STG-CT. In this paper we concentrate on the interaction downstream of the nozzles. After introducing the experimental equipment, characteristics of shock interaction are presented. Furthermore the appropriateness of the Penetration Knudsen Number for predicting the type of interaction also for thruster plumes is investigated.

  10. Foam drainage wave coalescing and its energy evolution

    Institute of Scientific and Technical Information of China (English)

    SUN QiCheng; HUANG Jin; WANG GuangQian

    2008-01-01

    Liquid foam is a dense packing of gas bubbles in a small amount of surfactant solution. Liquid drains out of foams until equilibrium is reached due to the compromise between gravity and capillarity, which greatly affects the stability of foam. Based on a series of work on foam structure and drainage we conducted previously, this paper reports the results on coalescence of an original forced drainage wave at a low flow rate with subsequent drainage waves with higher flow rates. The evolutions of vis-cous energy and surface energy during the process of coalescence are theoretically analyzed.

  11. Application of digital elevation model in delineating drainage networks

    Institute of Scientific and Technical Information of China (English)

    SUN Yan-ling; XIE De-ti; LIU Hong-bin; WEI Chao-fu

    2005-01-01

    A practical method to extract drainage network from DEM (digital elevation model) is introduced. DEM pretreatment includes depression and flat areas treatment. The flow direction of each grid cell in DEM is calculated according to the 8-direction pour point model, and then the flow accumulation grid from the flow direction grid. With the flow accumulation grid, streams are defined according to the given threshold value of flow accumulation. Taking Gufo River watershed as an example, the extraction of drainage network was done from DEM. The results are basically consistent with the digitized drainage network from the relief maps.

  12. Estimation of Volcanic Ash Plume Top Height using AATSR

    Science.gov (United States)

    Virtanen, Timo; Kolmonen, Pekka; Sogacheva, Larisa; Sundström, Anu-Maija; Rodriguez, Edith; de Leeuw, Gerrit

    2015-04-01

    The AATSR Correlation Method (ACM) height estimation algorithm is presented. The algorithm uses Advanced Along Track Scanning Radiometer (AATSR) satellite data to detect volcanic ash plumes and to estimate the plume top height. The height estimate is based on the stereo-viewing capability of the AATSR instrument, which allows to determine the parallax between the satellite's 55° forward and nadir views, and thus the corresponding height. Besides the stereo view, AATSR provides another advantage compared to other satellite based instruments. With AATSR it is possible to detect ash plumes using brightness temperature difference between thermal infrared (TIR) channels centered at 11 and 12 µm. The automatic ash detection makes the algorithm efficient in processing large quantities of data: the height estimate is calculated only for the ash-flagged pixels. In addition, it is possible to study the effect of using different wavelengths in the height estimate, ranging from visible (555 nm) to thermal infrared (12 µm). The ACM algorithm can be applied to the Sea and Land Surface Temperature Radiometer (SLSTR), scheduled for launch at the end of 2015. Accurate information on the volcanic ash position is important for air traffic safety. The ACM algorithm can provide valuable data of both horizontal and vertical ash dispersion. These data may be useful for comparisons with existing volcanic ash dispersion models and retrieval methods. We present ACM plume top height estimate results for the Eyjafjallajökull eruption, and comparisons against available ground based and satellite observations.

  13. Experiments on metal-silicate plumes and core formation.

    Science.gov (United States)

    Olson, Peter; Weeraratne, Dayanthie

    2008-11-28

    Short-lived isotope systematics, mantle siderophile abundances and the power requirements of the geodynamo favour an early and high-temperature core-formation process, in which metals concentrate and partially equilibrate with silicates in a deep magma ocean before descending to the core. We report results of laboratory experiments on liquid metal dynamics in a two-layer stratified viscous fluid, using sucrose solutions to represent the magma ocean and the crystalline, more primitive mantle and liquid gallium to represent the core-forming metals. Single gallium drop experiments and experiments on Rayleigh-Taylor instabilities with gallium layers and gallium mixtures produce metal diapirs that entrain the less viscous upper layer fluid and produce trailing plume conduits in the high-viscosity lower layer. Calculations indicate that viscous dissipation in metal-silicate plumes in the early Earth would result in a large initial core superheat. Our experiments suggest that metal-silicate mantle plumes facilitate high-pressure metal-silicate interaction and may later evolve into buoyant thermal plumes, connecting core formation to ancient hotspot activity on the Earth and possibly on other terrestrial planets.

  14. Acute Exposure Guideline Levels (AEGLs) for Time Varying Toxic Plumes

    Science.gov (United States)

    2014-09-12

    1.0 ! The plume densities are not scaled ... Agent = ’NH3’ Agent = ’ PLm ’ ! Any power from 0.0 to 9.0 Agent = ’CL2...Agent will be PLm Call POWER_LAW_AEGL ( power, Arho_PLC, Atime ) Call AGENT_SETUP ( Agent, Arho_PLC, taumin, taumax

  15. Analysis of Volcanic Plume Detection on Mount Etna through GPS

    Science.gov (United States)

    Cannavo, F.; Aranzulla, M.; Scollo, S.; Puglisi, G.; Imme', G.

    2013-12-01

    Volcanic ash produced during explosive eruptions causes disruptions to aviation operations and to population living around active volcanoes. In order to reduce their impact, the detection of volcanic plume is a necessary step and this is usually carried out using different platforms such as satellites, radars and lidars. Recently, the capability of GPS to retrieve volcanic plumes has been also investigated and some tests applied to explosive activity of Etna have demonstrated that also the GPS may give useful information. In this work, we use the permanent and continuous GPS network of the Istituto Nazionale di Geofisica e Vulcanologia, Osservatorio Etneo (Italy) that consists of 35 stations located all around volcano flanks. Data are processed by the GAMIT package developed by Massachusetts Institute of Technology. Here we investigate the possibility to detect the volcanic plume through the GPS signal features and to estimate its spatial distribution by means of a tomographic inversion algorithm. The method is tested on volcanic plumes produced during the lava fountain of 4-5 September 2007, already used to confirm if weak explosive activity may or may not affect the GPS signals. Others tests were finally applied to some lava fountains produced during the recent Etna explosive activity between 2011 and 2013.

  16. Hydrothermal plumes over the Carlsberg Ridge, Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Ray, D.; KameshRaju, K.A.; Baker, E.T.; Rao, A.S.; Mudholkar, A.V.; Lupton, J.E.; SuryaPrakash, L.; Gawas, R.B.; VijayaKumar, T.

    robust light-scattering and ORP anomalies at multiple depths, implying multiple sources. ORP anomalies are very short-lived, so the strong signals at both sites suggest that fluid sources lie within a few kilometers or less from the plume sampling...

  17. Atmospheric ventilation corridors and coefficients for pollution plume ...

    African Journals Online (AJOL)

    Tuoyo Aghomotsegin

    for gaseous pollution plume released from an isolated industrial facility into the ambient air of the host ...... ventilation coefficient and its impact on urban air pollution. J. Cent. ... an iron and steel smelting plant located along a busy high way in.

  18. Laser ablation plume expansion into an ambient gas

    DEFF Research Database (Denmark)

    Amoruso, S.; Schou, Jørgen; Lunney, J.G.

    2009-01-01

    The use of an ambient gas is a well-established method employed in pulsed laser deposition (PLD) with nanosecond pulses and has been extensively studied in this context. Most of the existing treatments of the plume expansion are tackled by using complex numerical modeling involving specific target...

  19. The Growth and Decay of Equatorial Backscatter Plumes.

    Science.gov (United States)

    1980-02-01

    spatially connected to bottomside backscatter, a feature noted in Jica - marca radar observations that led Woodman and La Hoz (1976) to speculate that...described in Section Ill-B, this pattern of plume growth resembles the "C-shaped" and "fishtail" patterns found in Jica - marca radar RTI displays of 50-MHz

  20. Limited latitudinal mantle plume motion for the Louisville hotspot

    Science.gov (United States)

    Koppers, Anthony A. P.; Yamazaki, Toshitsugu; Geldmacher, Jörg; Gee, Jeffrey S.; Pressling, Nicola; Koppers, Anthony A. P.; Yamazaki, Toshitsugu; Geldmacher, Jörg; Gee, Jeffrey S.; Pressling, Nicola; Hoshi, Hiroyuki; Anderson, L.; Beier, C.; Buchs, D. M.; Chen, L.-H.; Cohen, B. E.; Deschamps, F.; Dorais, M. J.; Ebuna, D.; Ehmann, S.; Fitton, J. G.; Fulton, P. M.; Ganbat, E.; Hamelin, C.; Hanyu, T.; Kalnins, L.; Kell, J.; Machida, S.; Mahoney, J. J.; Moriya, K.; Nichols, A. R. L.; Rausch, S.; Sano, S.-I.; Sylvan, J. B.; Williams, R.

    2012-12-01

    Hotspots that form above upwelling plumes of hot material from the deep mantle typically leave narrow trails of volcanic seamounts as a tectonic plate moves over their location. These seamount trails are excellent recorders of Earth's deep processes and allow us to untangle ancient mantle plume motions. During ascent it is likely that mantle plumes are pushed away from their vertical upwelling trajectories by mantle convection forces. It has been proposed that a large-scale lateral displacement, termed the mantle wind, existed in the Pacific between about 80 and 50 million years ago, and shifted the Hawaiian mantle plume southwards by about 15° of latitude. Here we use 40Ar/39Ar age dating and palaeomagnetic inclination data from four seamounts associated with the Louisville hotspot in the South Pacific Ocean to show that this hotspot has been relatively stable in terms of its location. Specifically, the Louisville hotspot--the southern hemisphere counterpart of Hawai'i--has remained within 3-5° of its present-day latitude of about 51°S between 70 and 50 million years ago. Although we cannot exclude a more significant southward motion before that time, we suggest that the Louisville and Hawaiian hotspots are moving independently, and not as part of a large-scale mantle wind in the Pacific.

  1. Vapor plumes: A neglected aspect of impact cratering

    Science.gov (United States)

    Melosh, H. J.

    1991-06-01

    When a meteorite or comet strikes the surface of the planet or satellite at typical interplanetary velocities of 10-40 km/sec, the projectile and a quantity of the target body vaporize and expand out of the growing crater at high speed. The crater continues to grow after the vapor plume has formed and the series of ejecta deposits is laid down ballistically while the crater collapses into its final morphology. Although the vapor plume leaves little evidence of its existence in the crater structure of surface deposits, it may play a major role in a number of impact-related processes. The vapor plume expanding away from the site of an impact carries 25-50 percent of the total impact energy. Although the plume's total mass is only a few times the mass of the projectile, its high specific energy content means that it is the fastest and most highly shocked material in the cratering event. The mean velocity of expansion can easily exceed the escape velocity of the target plane, so that the net effect of a sufficiently high-speed impact is to erode material from the planet.

  2. Electrical conductivity of the dusty plasma in the Enceladus plume

    Science.gov (United States)

    Yaroshenko, V. V.; Lühr, H.

    2016-11-01

    The plasma conductivity is an important issue for understanding the magnetic field structure registered by Cassini in the Enceladus proximity. We have revise the conductivity mechanism to incorporate the plume nanograins as a new plasma species and take into account the relevant collisional processes including those accounting for the momentum exchange between the charged dust and co-rotating ions. It is concluded that in the Enceladus plume the dust dynamics affects the Pedersen and Hall conductivity more efficiently than the electron depletion associated with the presence of the negatively charged dust as has been suggested by Simon et al. (Simon, S., Saur, J., Kriegel, H., Neubauer, F. M., Motschmann, U., and Dougherty, U. [2011] J. Geophys. Res., 116, A04221, doi:10.1029/2010JA016338). The electron depletion remains a decisive factor for only the parallel conductivity. In the parameter regime relevant for the Enceladus plume, one finds increase of the Pedersen and decrease of the parallel components, whereas for the Hall conductivity the charged dust changes both - its value and the sign. The associated reversed Hall effect depends significantly upon the local dust-to-plasma density ratio. An onset of the reversed Hall effect appears to be restricted to outer parts of the Enceladus plume. The results obtained can significantly modify Enceladus' Alfvén wing structure and thus be useful for interpretations of the magnetic field perturbations registered by the Cassini Magnetometer during the close Enceladus flybys.

  3. Ion Engine Plume Interaction Calculations for Prototypical Prometheus 1

    Science.gov (United States)

    Mandell, Myron J.; Kuharski, Robert A.; Gardner, Barbara M.; Katz, Ira; Randolph, Tom; Dougherty, Ryan; Ferguson, Dale C.

    2005-01-01

    Prometheus 1 is a conceptual mission to demonstrate the use of atomic energy for distant space missions. The hypothetical spacecraft design considered in this paper calls for multiple ion thrusters, each with considerably higher beam energy and beam current than have previously flown in space. The engineering challenges posed by such powerful thrusters relate not only to the thrusters themselves, but also to designing the spacecraft to avoid potentially deleterious effects of the thruster plumes. Accommodation of these thrusters requires good prediction of the highest angle portions of the main beam, as well as knowledge of clastically scattered and charge exchange ions, predictions for grid erosion and contamination of surfaces by eroded grid material, and effects of the plasma plume on radio transmissions. Nonlinear interactions of multiple thrusters are also of concern. In this paper we describe two- and three-dimensional calculations for plume structure and effects of conceptual Prometheus 1 ion engines. Many of the techniques used have been validated by application to ground test data for the NSTAR and NEXT ion engines. Predictions for plume structure and possible sputtering and contamination effects will be presented.

  4. Rejuvenation of the lithosphere by the Hawaiian plume.

    Science.gov (United States)

    Li, Xueqing; Kind, Rainer; Yuan, Xiaohui; Wölbern, Ingo; Hanka, Winfried

    2004-02-26

    The volcanism responsible for creating the chain of the Hawaiian islands and seamounts is believed to mark the passage of the oceanic lithosphere over a mantle plume. In this picture hot material rises from great depth within a fixed narrow conduit to the surface, penetrating the moving lithosphere. Although a number of models describe possible plume-lithosphere interactions, seismic imaging techniques have not had sufficient resolution to distinguish between them. Here we apply the S-wave 'receiver function' technique to data of three permanent seismic broadband stations on the Hawaiian islands, to map the thickness of the underlying lithosphere. We find that under Big Island the lithosphere is 100-110 km thick, as expected for an oceanic plate 90-100 million years old that is not modified by a plume. But the lithosphere thins gradually along the island chain to about 50-60 km below Kauai. The width of the thinning is about 300 km. In this zone, well within the larger-scale topographic swell, we infer that the rejuvenation model (where the plume thins the lithosphere) is operative; however, the larger-scale topographic swell is probably supported dynamically.

  5. Merits of a Scenario Approach in Dredge Plume Modelling

    DEFF Research Database (Denmark)

    Pedersen, Claus; Chu, Amy Ling Chu; Hjelmager Jensen, Jacob

    2011-01-01

    Dredge plume modelling is a key tool for quantification of potential impacts to inform the EIA process. There are, however, significant uncertainties associated with the modelling at the EIA stage when both dredging methodology and schedule are likely to be a guess at best as the dredging contrac...

  6. The composition of mantle plumes and the deep Earth

    Science.gov (United States)

    Hastie, Alan R.; Fitton, J. Godfrey; Kerr, Andrew C.; McDonald, Iain; Schwindrofska, Antje; Hoernle, Kaj

    2016-06-01

    Determining the composition and geochemical diversity of Earth's deep mantle and subsequent ascending mantle plumes is vital so that we can better understand how the Earth's primitive mantle reservoirs initially formed and how they have evolved over the last 4.6 billion years. Further data on the composition of mantle plumes, which generate voluminous eruptions on the planet's surface, are also essential to fully understand the evolution of the Earth's hydrosphere and atmosphere with links to surface environmental changes that may have led to mass extinction events. Here we present new major and trace element and Sr-Nd-Pb-Hf isotope data on basalts from Curacao, part of the Caribbean large igneous province. From these and literature data, we calculate combined major and trace element compositions for the mantle plumes that generated the Caribbean and Ontong Java large igneous provinces and use mass balance to determine the composition of the Earth's lower mantle. Incompatible element and isotope results indicate that mantle plumes have broadly distinctive depleted and enriched compositions that, in addition to the numerous mantle reservoirs already proposed in the literature, represent large planetary-scale geochemical heterogeneity in the Earth's deep mantle that are similar to non-chondritic Bulk Silicate Earth compositions.

  7. Apollo Video Photogrammetry Estimation Of Plume Impingement Effects

    Science.gov (United States)

    Immer, Christopher; Lane, John; Metzger, Philip T.; Clements, Sandra

    2008-01-01

    The Constellation Project's planned return to the moon requires numerous landings at the same site. Since the top few centimeters are loosely packed regolith, plume impingement from the Lander ejects the granular material at high velocities. Much work is needed to understand the physics of plume impingement during landing in order to protect hardware surrounding the landing sites. While mostly qualitative in nature, the Apollo Lunar Module landing videos can provide a wealth of quantitative information using modem photogrammetry techniques. The authors have used the digitized videos to quantify plume impingement effects of the landing exhaust on the lunar surface. The dust ejection angle from the plume is estimated at 1-3 degrees. The lofted particle density is estimated at 10(exp 8)- 10(exp 13) particles per cubic meter. Additionally, evidence for ejection of large 10-15 cm sized objects and a dependence of ejection angle on thrust are presented. Further work is ongoing to continue quantitative analysis of the landing videos.

  8. Global volcanic emissions: budgets, plume chemistry and impacts

    Science.gov (United States)

    Mather, T. A.

    2012-12-01

    Over the past few decades our understanding of global volcanic degassing budgets, plume chemistry and the impacts of volcanic emissions on our atmosphere and environment has been revolutionized. Global volcanic emissions budgets are needed if we are to make effective use of regional and global atmospheric models in order to understand the consequences of volcanic degassing on global environmental evolution. Traditionally volcanic SO2 budgets have been the best constrained but recent efforts have seen improvements in the quantification of the budgets of other environmentally important chemical species such as CO2, the halogens (including Br and I) and trace metals (including measurements relevant to trace metal atmospheric lifetimes and bioavailability). Recent measurements of reactive trace gas species in volcanic plumes have offered intriguing hints at the chemistry occurring in the hot environment at volcanic vents and during electrical discharges in ash-rich volcanic plumes. These reactive trace species have important consequences for gas plume chemistry and impacts, for example, in terms of the global fixed nitrogen budget, volcanically induced ozone destruction and particle fluxes to the atmosphere. Volcanically initiated atmospheric chemistry was likely to have been particularly important before biological (and latterly anthropogenic) processes started to dominate many geochemical cycles, with important consequences in terms of the evolution of the nitrogen cycle and the role of particles in modulating the Earth's climate. There are still many challenges and open questions to be addressed in this fascinating area of science.

  9. Base flow and exhaust plume interaction. Part 1: Experimental study

    NARCIS (Netherlands)

    Schoones, M.M.J.; Bannink, W.J.

    1998-01-01

    An experimental study of the flow field along an axi-symmetric body with a single operating exhaust nozzle has been performed in the scope of an investigation on base flow-jet plume interactions. The structure of under-expanded jets in a co-flowing supersonic free stream was described using analytic

  10. Laser ablation plume expansion into an ambient gas

    DEFF Research Database (Denmark)

    Amoruso, S.; Schou, Jørgen; Lunney, J.G.

    2009-01-01

    The use of an ambient gas is a well-established method employed in pulsed laser deposition (PLD) with nanosecond pulses and has been extensively studied in this context. Most of the existing treatments of the plume expansion are tackled by using complex numerical modeling involving specific target...

  11. Turbulent acidic jets and plumes injected into an alkaline environment

    Science.gov (United States)

    Ulpre, Hendrik

    2012-11-01

    The characteristics of a strong acidic turbulent jet or plume injected into an alkaline environment comprising of a weak/strong base are examined theoretically and experimentally. A chemistry model is developed to understand how the pH of a fluid parcel of monoprotic acid changes as it is diluted and reacts with the ambient fluid. A standard fluid model, based on a top-hat model for acid concentration and velocity is used to express how the dilution of acid varies with distance from the point of discharge. These models are applied to estimate the point of neutralisation and the travel time with distance within the jet/plume. An experimental study was undertaken to test the theoretical results. These experiments involved injecting jets or vertical plumes of dilute nitric acid into a large tank containing a variety of base salts dissolved in water. The injected fluid contained litmus indicator dye which showed a change in colour from red to blue close to the point of neutralisation. In order to obtain a range of neutralisation distances, additional basic salts were added to the water to increase its pH buffering capacity. The results are applied to discuss the environmental implications of an acidic jet/plume injected into the sea off the South East coast of Great Britain.

  12. Contaminant plumes containment and remediation focus area. Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    EM has established a new approach to managing environmental technology research and development in critical areas of interest to DOE. The Contaminant Plumes Containment and Remediation (Plumes) Focus Area is one of five areas targeted to implement the new approach, actively involving representatives from basic research, technology implementation, and regulatory communities in setting objectives and evaluating results. This document presents an overview of current EM activities within the Plumes Focus Area to describe to the appropriate organizations the current thrust of the program and developing input for its future direction. The Plumes Focus Area is developing remediation technologies that address environmental problems associated with certain priority contaminants found at DOE sites, including radionuclides, heavy metals, and dense non-aqueous phase liquids (DNAPLs). Technologies for cleaning up contaminants of concern to both DOE and other federal agencies, such as volatile organic compounds (VOCs), polychlorinated biphenyls (PCBs), and other organics and inorganic compounds, will be developed by leveraging resources in cooperation with industry and interagency programs.

  13. Long hole waterjet drilling for gas drainage

    Energy Technology Data Exchange (ETDEWEB)

    Matt Stockwell; M. Gledhill; S. Hildebrand; S. Adam; Tim Meyer [CMTE (Australia)

    2003-04-01

    In-seam drilling for gas drainage is now an essential part of operations at many Australian underground coalmines. The objective of this project is to develop and trial a new drilling method for the accurate and efficient installation of long inseam boreholes (>1000 metres). This involves the integration of pure water-jet drilling technology (i.e. not water-jet assisted rotary drilling) developed by CMTE with conventional directional drilling technology. The system was similar to conventional directional drilling methods, but instead of relying on a down-hole-motor (DHM) rotating a mechanical drill bit for cutting, high pressure water-jets were used. The testing of the system did not achieve the full objectives set down in the project plan. A borehole greater than 1000 metres was not achieved. The first trial site had coal that was weathered, oxidized and dry. These conditions significantly affected the ability of the drilling tool to stay 'in-seam'. Due to the poor conditions at the first trial, many experimental objectives were forwarded to the second field trial. In the second trial drilling difficulties were experienced, this was due to the interaction between the confinement of the borehole and the dimensions of the down hole drilling assembly. This ultimately reduced the productivity of the system and the distance that could be drilled within the specified trial periods. Testing in the first field trial did not show any indication that the system would have this difficulty.

  14. DROUGHT ANALYSIS IN OZANA DRAINAGE BASIN

    Directory of Open Access Journals (Sweden)

    Marina IOSUB

    2016-03-01

    Full Text Available Ozana drainage basin is located at the contact between large landscape units (the Carpathian mountains, the Subcarpathian area, and the plateau region. This placement determines the existence of a complex climate in the region. Despite being small in size, and its extension on an W-E direction, differences can be observed, especially of the way extreme phenomena take place. In the case of droughts, it had different intensities in the mountains, compared to the plateau region. In order to emphasize the different distribution on the territory, several climatic indexes have been calculated, regarding dryness (De Martonne Index, Hellman criterion. The analysis of these indexes at the same monitoring stations (Pluton, Leghin and Dumbrava emphasizes the growth of the drought periods in the plateau region and the fact that they shorten in the mountain area. In the mountainous area, where the land is very well forested, the values of the De Martonne index can reach 45.4, and in the plateau regions, where the forest associations are sparse, the values dropped to 30.6. According to the Hellman criterion, several differences can be emphasized, at basin level. In the mountainous region, there is only one month that, at a multi-annual level, has stood up among the rest, as being excessively droughty, while in the median /central region of the basin, three months have been identified, that have such potential, as well as five months, at Dumbrava.

  15. Bubbles generated from wind-steepened breaking waves: 2. Bubble plumes, bubbles, and wave characteristics

    NARCIS (Netherlands)

    Leifer, I.; Caulliez, G.; Leeuw, G.de

    2006-01-01

    Measurements of breaking-wave-generated bubble plumes were made in fresh (but not clean) water in a large wind-wave tunnel. To preserve diversity, a classification scheme was developed on the basis of plume dimensions and "optical density," or the plume's ability to obscure the background. Optically

  16. 76 FR 2112 - Peach Orchard Road Groundwater Plume Site, Augusta, Richmond County, GA; Notice of Settlement

    Science.gov (United States)

    2011-01-12

    ... AGENCY Peach Orchard Road Groundwater Plume Site, Augusta, Richmond County, GA; Notice of Settlement... costs concerning the Peach Orchard Road Groundwater Plume Site located in Augusta, Richmond County... Site name Peach Orchard Road Groundwater Plume Superfund Site by one of the following methods: http...

  17. Heat and mass transfer in the mushroom-shaped head of mantle plume

    Directory of Open Access Journals (Sweden)

    Kirdyashkin Anatoly

    2017-01-01

    Full Text Available The results of experimental and theoretical modeling of free-convection flows in the melt of the plume conduit and in the mushroom-shaped head are presented. It was shown that the plumes with the mushroom-shaped heads can be responsible for the batholith formation. The main parameters of such plumes are estimated.

  18. A parameter model for dredge plume sediment source terms

    Science.gov (United States)

    Decrop, Boudewijn; De Mulder, Tom; Toorman, Erik; Sas, Marc

    2017-01-01

    The presented model allows for fast simulations of the near-field behaviour of overflow dredging plumes. Overflow dredging plumes occur when dredging vessels employ a dropshaft release system to discharge the excess sea water, which is pumped into the trailing suction hopper dredger (TSHD) along with the dredged sediments. The fine sediment fraction in the loaded water-sediment mixture does not fully settle before it reaches the overflow shaft. By consequence, the released water contains a fine sediment fraction of time-varying concentration. The sediment grain size is in the range of clays, silt and fine sand; the sediment concentration varies roughly between 10 and 200 g/l in most cases, peaking at even higher value with short duration. In order to assess the environmental impact of the increased turbidity caused by this release, plume dispersion predictions are often carried out. These predictions are usually executed with a large-scale model covering a complete coastal zone, bay, or estuary. A source term of fine sediments is implemented in the hydrodynamic model to simulate the fine sediment dispersion. The large-scale model mesh resolution and governing equations, however, do not allow to simulate the near-field plume behaviour in the vicinity of the ship hull and propellers. Moreover, in the near-field, these plumes are under influence of buoyancy forces and air bubbles. The initial distribution of sediments is therefore unknown and has to be based on crude assumptions at present. The initial (vertical) distribution of the sediment source is indeed of great influence on the final far-field plume dispersion results. In order to study this near-field behaviour, a highly-detailed computationally fluid dynamics (CFD) model was developed. This model contains a realistic geometry of a dredging vessel, buoyancy effects, air bubbles and propeller action, and was validated earlier by comparing with field measurements. A CFD model requires significant simulation times

  19. Plumes and Earth's Dynamic History : from Core to Biosphere

    Science.gov (United States)

    Courtillot, V. E.

    2002-12-01

    The last half century has been dominated by the general acceptance of plate tectonics. Although the plume concept emerged early in this story, its role has remained ambiguous. Because plumes are singularities, both in space and time, they tend to lie dangerously close to catastrophism, as opposed to the calm uniformitarian view of plate tectonics. Yet, it has become apparent that singular events and transient phenomena are of great importance, even if by definition they cover only a small fraction of geological time, in diverse observational and theoretical fields such as 1) magnetic reversals and the geodynamo, 2) tomography and mantle convection, 3) continental rifting and collision, and 4) evolution of the fluid envelopes (atmospheric and oceanic "climate"; evolution of species in the biosphere). I will emphasize recent work on different types of plumes and on the correlation between flood basalts and mass extinctions. The origin of mantle plumes remains a controversial topic. We suggest that three types of plumes exist, which originate at the three main discontinuities in the Earth's mantle (base of lithosphere, transition zone and core-mantle boundary). Most of the hotspots are short lived (~ 10Ma) and seem to come from the transition zone or above. Important concentrations occur above the Pacific and African superswells. Less than 10 hotspots have been long lived (~ 100Ma) and may have a very deep origin. In the last 50 Ma, these deep-seated plumes in the Pacific and Indo-Atlantic hemispheres have moved slowly, but motion was much faster prior to that. This change correlates with major episodes of true polar wander. The deeper ("primary") plumes are thought to trace global shifts in quadrupolar convection in the lower mantle. These are the plumes that were born as major flood basalts or oceanic plateaus (designated as large igneous provinces or LIPs). Most have an original volume on the order or in excess of 2.5 Mkm3. In most provinces, volcanism lasted on

  20. Ion energy distributions and densities in the plume of Enceladus

    Science.gov (United States)

    Sakai, Shotaro; Cravens, Thomas E.; Omidi, Nojan; Perry, Mark E.; Waite, J. Hunter

    2016-10-01

    Enceladus has a dynamic plume that is emitting gas, including water vapor, and dust. The gas is ionized by solar EUV radiation, charge exchange, and electron impact and extends throughout the inner magnetosphere of Saturn. The charge exchange collisions alter the plasma composition. Ice grains (dust) escape from the vicinity of Enceladus and form the E ring, including a portion that is negatively charged by the local plasma. The inner magnetosphere within 10 RS (Saturn radii) contains a complex mixture of plasma, neutral gas, and dust that links back to Enceladus. In this paper we investigate the energy distributions, ion species and densities of water group ions in the plume of Enceladus using test particle and Monte Carlo methods that include collisional processes such as charge exchange and ion-neutral chemical reactions. Ion observations from the Cassini Ion and Neutral Mass Spectrometer (INMS) for E07 are presented for the first time. We use the modeling results to interpret observations made by the Cassini Plasma Spectrometer (CAPS) and the INMS. The low energy ions, as observed by CAPS, appear to be affected by a vertical electric field (EZ=-10 μV/m) in the plume. The EZ field may be associated with the charged dust and/or the pressure gradient of plasma. The model results, along with the results of earlier models, show that H3O+ ions created by chemistry are predominant in the plume, which agrees with INMS and CAPS data, but the INMS count rate in the plume for the model is several times greater than the data, which we do not fully understand. This composition and the total ion count found in the plume agree with INMS and CAPS data. On the other hand, the Cassini Langmuir Probe measured a maximum plume ion density more than 30,000 cm-3, which is far larger than the maximum ion density from our model, 900 cm-3. The model results also demonstrate that most of the ions in the plume are from the external magnetospheric flow and are not generated by local

  1. Pb - Isotopes and Pulses of the Deccan Plume

    Science.gov (United States)

    Basu, A. R.; Yannopoulos, A. S.

    2015-12-01

    Mantle plumes are generally implicated for flood basalt generation in both continental and oceanic environments by impact of large plume heads beneath or within the lithosphere. The Deccan and Siberian flood basalt eruptions, synchronous with the Cretaceous-Paleogene and end-Permian extinctions, respectively, continue to fascinate geoscientists in search for the "kill-mechanisms" by impacts, volcanisms or both. Recently, Richards et al. (2015) proposed that bulk of the Deccan eruption was triggered by the Chicxulub impact. We showed (Basu et al., 1993) that early (68.5 Ma) and late (65 Ma) alkalic pulses of the Deccan were before and after the impact event at 66 Ma. Here, we focus on an extensive volcano-stratigraphic study of Pb isotopic systematics of 69 basaltic samples from 3 subgroups and 12 formations of the Deccan, each sampled from bottom to top along the stratigraphic section, covering the 3km thick 12 Deccan formations. Pb is sensitive to crustal contamination of mantle plume-derived magmas as both the upper and lower mantle are low in Pb (0.02 - 0.15 ppm) compared to ~ 4 ppm in continental crust. The lower Deccan formations of Kalsubai and Lonavala have initial 206Pb/204Pb with a widely varying range (16.543 - 22.823) indicating continental crustal contamination. In contrast, the upper formations of the Wai subgroup show a narrow range of 16.883 to 18.956, reflecting the plume signature. In addition, the 206Pb/204Pb and 207Pb/204Pb data of the Kalsubai subgroup lavas give an isochron age of 2603±140 Ma (single-stage, µ = 8). The Wai subgroup shows a narrow and restricted Pb isotopic range plotting closer to the Geochron. We interpret these data to infer that the basement rocks of the Deccan, the Archean Indian craton, were assimilated by the upwelling melt, ultimately clearing the conduit passages for the lavas sourced from direct melting of the plume head.

  2. Mapping of plume deposits and surface composition on Enceladus

    Science.gov (United States)

    Nordheim, T. A.; Scipioni, F.; Cruikshank, D. P.; Clark, R. N.,; Hand, K. P.

    2017-01-01

    A major result of the Cassini mission was the discovery that the small mid-sized moon Enceladus is presently geological active[Dougherty et al., 2006; Porco et al., 2006; Spencer et al., 2006; Hansen et al., 2008]. This activity results in plumes of water vapor and ice emanating from a series of fractures ("Tiger Stripes") at the moon's South Pole. Some fraction of plume material escapes the moon's gravity and populates the E-ring as well as ultimately providing a source of fresh plasma in the Saturnian magnetosphere [Pontius and Hill, 2006; Kempf et al., 2010]. However, a significant portion of plume material is redeposited on Enceladus and thus provides a source of surface contaminants. By studying the near-infrared spectral signatures of these contaminants we may put new constraints on the composition of the plumes and, ultimately, their source, which is currently believed to be Enceladus's global sub-surface ocean [Iess et al., 2014]. Here we present preliminary results from our analysis of observations from the Visual and Infrared Mapping Spectrometer (VIMS) [Brown et al., 2005] onboard Cassini and mapping of plume deposits across the surface of Enceladus. We have investigated the global variation of the water ice Fresnel peak at 3.1 μm, which may be used as an indicator of ice crystallinity [Hansen & McCord, 2004; Jaumann et al., 2008; Newman et al., 2008]. We have also investigated the slope of the 1.11-2.25 μm spectral region, which serves as an indicator of water ice grain size for small grains (< 100 μm) as well as the presence of contaminants [e.g. Filacchione et al., 2010]. Finally, we have identified and mapped an absorption feature centered at 3.25 μm that may be related to organic contaminants, represented by the band depth of the fundamental C-H stretch [e.g. Cruikshank et al., 2014; Scipioni et al., 2014].

  3. Arsenic cycling in hydrocarbon plumes: secondary effects of natural attenuation

    Science.gov (United States)

    Cozzarelli, Isabelle M.; Schreiber, Madeline E.; Erickson, Melinda L.; Ziegler, Brady A.

    2016-01-01

    Monitored natural attenuation is widely applied as a remediation strategy at hydrocarbon spill sites. Natural attenuation relies on biodegradation of hydrocarbons coupled with reduction of electron acceptors, including solid phase ferric iron (Fe(III)). Because arsenic (As) adsorbs to Fe-hydroxides, a potential secondary effect of natural attenuation of hydrocarbons coupled with Fe(III) reduction is a release of naturally occurring As to groundwater. At a crude-oil-contaminated aquifer near Bemidji, Minnesota, anaerobic biodegradation of hydrocarbons coupled to Fe(III) reduction has been well documented. We collected groundwater samples at the site annually from 2009 to 2013 to examine if As is released to groundwater and, if so, to document relationships between As and Fe inside and outside of the dissolved hydrocarbon plume. Arsenic concentrations in groundwater in the plume reached 230 µg/L, whereas groundwater outside the plume contained less than 5 µg/L As. Combined with previous data from the Bemidji site, our results suggest that (1) naturally occurring As is associated with Fe-hydroxides present in the glacially derived aquifer sediments; (2) introduction of hydrocarbons results in reduction of Fe-hydroxides, releasing As and Fe to groundwater; (3) at the leading edge of the plume, As and Fe are removed from groundwater and retained on sediments; and (4) downgradient from the plume, patterns of As and Fe in groundwater are similar to background. We develop a conceptual model of secondary As release due to natural attenuation of hydrocarbons that can be applied to other sites where an influx of biodegradable organic carbon promotes Fe(III) reduction.

  4. Development of a GNSS Volcano Ash Plume Detector

    Science.gov (United States)

    Rainville, N.; Palo, S. E.; Larson, K. M.; Naik, S. R.

    2015-12-01

    Global Navigation Satellite Systems (GNSS), broadcast signals continuously from mid Earth orbit at a frequency near 1.5GHz. Of the four GNSS constellations, GPS and GLONASS are complete with more than 55 satellites in total. While GNSS signals are intended for navigation and timing, they have also proved to be useful for remote sensing applications. Reflections of the GNSS signals have been used to sense soil moisture, snow depth, and wind speed while refraction of the signals through the atmosphere has provided data on the electron density in the ionosphere as well as water vapor and temperature in the troposphere. Now analysis at the University of Colorado has shown that the attenuation of GNSS signals by volcanic ash plumes can be used to measure the presence and structure of the ash plume. This discovery is driving development of a distributed GNSS sensor network to complement existing optical and radar based ash plume monitoring systems. A GNSS based sensing system operating in L-band is unaffected by weather conditions or time of day. Additionally, the use of an existing signal source greatly reduces the per sensor cost and complexity compared to a radar system. However since any one measurement using this method provides only the total attenuation between the GNSS satellite and the receiver, full tomographic imaging of a plume requires a large number of sensors observing over a diversity of geometries. This presentation will provide an overview of the ongoing development of the GNSS sensor system. Evaluation of low priced commercial GNSS receivers will be discussed, as well as details on the inter sensor network. Based on analysis of existing GPS receivers near volcanic vents, the baseline configuration for an ash plume monitoring network is a 1km spaced ring of receivers 5km from the vent updating every 5 seconds. Preliminary data from field tests will be presented to show the suitability of the sensor system for this configuration near an active volcano.

  5. Plume spectrometry for liquid rocket engine health monitoring

    Science.gov (United States)

    Powers, William T.; Sherrell, F. G.; Bridges, J. H., III; Bratcher, T. W.

    1988-01-01

    An investigation of Space Shuttle Main Engine (SSME) testing failures identified optical events which appeared to be precursors of those failures. A program was therefore undertaken to detect plume trace phenomena characteristic of the engine and to design a monitoring system, responsive to excessive activity in the plume, capable of delivering a warning of an anomalous condition. By sensing the amount of extraneous material entrained in the plume and considering engine history, it may be possible to identify wearing of failing components in time for a safe shutdown and thus prevent a catastrophic event. To investigate the possibilities of safe shutdown and thus prevent a monitor to initiate the shutdown procedure, a large amount of plume data were taken from SSME firings using laboratory instrumentation. Those data were used to design a more specialized instrument dedicated to rocket plume diagnostics. The spectral wavelength range of the baseline data was about 220 nanometers (nm) to 15 micrometer with special attention given to visible and near UV. The data indicates that a satisfactory design will include a polychromator covering the range of 250 nM to 1000 nM, along with a continuous coverage spectrometer, each having a resolution of at least 5A degrees. The concurrent requirements for high resolution and broad coverage are normally at odds with one another in commercial instruments, therefore necessitating the development of special instrumentation. The design of a polychromator is reviewed herein, with a detailed discussion of the continuous coverage spectrometer delayed to a later forum. The program also requires the development of applications software providing detection, variable background discrimination, noise reduction, filtering, and decision making based on varying historical data.

  6. Bubble plumes generated during recharge of basaltic magma reservoirs

    Science.gov (United States)

    Phillips, Jeremy C.; Woods, Andrew W.

    2001-03-01

    CO 2 is relatively insoluble in basaltic magma at low crustal pressures. It therefore exists as a gas phase in the form of bubbles in shallow crustal reservoirs. Over time these bubbles may separate gravitationally from the magma in the chamber. As a result, any new magma which recharges the chamber from deeper in the crust may be more bubble-rich and hence of lower density than the magma in the chamber. Using scaling arguments, we show that for typical recharge fluxes, such a source of low-viscosity, bubble-rich basalt may generate a turbulent bubble plume within the chamber. We also show that the bubbles are typically sufficiently small to have a low Reynolds number and to remain in the flow. We then present a series of analogue laboratory experiments which identify that the motion of such a turbulent bubble-driven line plume is well described by the classical theory of buoyant plumes. Using the classical plume theory we then examine the effect of the return flow associated with such bubble plumes on the mixing and redistribution of bubbles within the chamber. Using this model, we show that a relatively deep bubbly layer of magma may form below a thin foam layer at the roof. If, as an eruption proceeds, there is a continuing influx at the base of the chamber, then our model suggests that the bubble content of the bubbly layer may gradually increase. This may lead to a transition from lava flow activity to more explosive fire-fountaining activity. The foam layer at the top of the chamber may provide a flux for the continual outgassing from the flanks of the volcano [Ryan, Am. Geophys. Union Geophys. Monogr. 91 (1990)] and if it deepens sufficiently it may contribute to the eruptive activity [Vergniolle and Jaupart, J. Geophys. Res. 95 (1990) 2793-3001].

  7. Bibliography for acid-rock drainage and selected acid-mine drainage issues related to acid-rock drainage from transportation activities

    Science.gov (United States)

    Bradley, Michael W.; Worland, Scott C.

    2015-01-01

    Acid-rock drainage occurs through the interaction of rainfall on pyrite-bearing formations. When pyrite (FeS2) is exposed to oxygen and water in mine workings or roadcuts, the mineral decomposes and sulfur may react to form sulfuric acid, which often results in environmental problems and potential damage to the transportation infrastructure. The accelerated oxidation of pyrite and other sulfidic minerals generates low pH water with potentially high concentrations of trace metals. Much attention has been given to contamination arising from acid mine drainage, but studies related to acid-rock drainage from road construction are relatively limited. The U.S. Geological Survey, in cooperation with the Tennessee Department of Transportation, is conducting an investigation to evaluate the occurrence and processes controlling acid-rock drainage and contaminant transport from roadcuts in Tennessee. The basic components of acid-rock drainage resulting from transportation activities are described and a bibliography, organized by relevant categories (remediation, geochemical, microbial, biological impact, and secondary mineralization) is presented.

  8. 1986 moose census, lower Nowitna River drainage: Final report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — A moose survey of the lower Nowitna drainage on the Nowitna National Wildlife Refuge was conducted from 17-21 November 1986. The 1986 population estimate for the...

  9. Adaptive Drainage Slots for Acoustic Noise Attenuation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Cornerstone Research Group, Inc. (CRG) demonstrated feasibility in the reduction of noise attributed to drainage slots in jet engine acoustic liners. This was...

  10. Drainage report for Delair Division of Great River NWR

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Obstacles such as ground seepage, inefficient water control structures, and backwater in the Sny Ditch are all contributing to drainage problems at the Delair...

  11. Monitoring and remediation technologies of organochlorine pesticides in drainage water

    Directory of Open Access Journals (Sweden)

    Ismail Ahmed

    2015-03-01

    Full Text Available This study was carried out to monitor the presence of organochlorine in drainage water in Kafr-El-Sheikh Governorate, Egypt. Furthermore, to evaluate the efficiencies of different remediation techniques (advanced oxidation processes [AOPs] and bioremediation for removing the most frequently detected compound (lindane in drainage water. The results showed the presence of several organochlorine pesticides in all sampling sites. Lindane was detected with high frequency relative to other detected organochlorine in drainage water. Nano photo-Fenton like reagent was the most effective treatment for lindane removal in drainage water. Bioremediation of lindane by effective microorganisms (EMs removed 100% of the lindane initial concentration. There is no remaining toxicity in lindane contaminated-water after remediation on treated rats relative to control with respect to histopathological changes in liver and kidney. Advanced oxidation processes especially with nanomaterials and bioremediation using effective microorganisms can be regarded as safe and effective remediation technologies of lindane in water.

  12. Recycling Facilities - Mine Drainage Treatment/Land Recycling Project Locations

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — Mine Drainage Treatment/Land Reclamation Locations are clean-up projects that are working to eliminate some form of abandoned mine. The following sub-facility types...

  13. Gravity Drainage of Activated Sludge on Reed Beds

    DEFF Research Database (Denmark)

    Christensen, Morten Lykkegaard; Dominiak, Dominik Marek; Keiding, Kristian;

    Activated sludge is a by-product from waste water treatment plants, and the water content in the sludge is high (> 90%). Among several methods to remove the water, sludge drying reed beds are often used to dewater the sludge by drainage. There is, however, no well-defined criterion for design...... has therefore been developed to measure relevant quality parameters: specific cake resistance, settling velocity and cake compressibility. It has been found that activated sludge form highly compressible cake even at the low compressive pressures obtained during drainage. Numerical simulation shows...... that the compressibility has a high influence on the drainage process especially during the start-up phases where the volumetric load on the sludge bed is critical. The load has to be low in order to ensure that the drainage properties of the bed are not destroyed. The data also shows that transport of activated sludge...

  14. Fall 1979 moose surveys, Sheenjek, Old Woman, Coleen drainages

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Summary of fall moose population statistics for the upper Sheenjek River drainage (including all tributaries upstream of Lobo Lake) and of Old Woman Creek. William...

  15. Vegetation damage and recovery after Chiginagak Volcano Crater drainage event

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — From August 20 — 23, 2006, I revisited Chiginigak volcano to document vegetation recovery after the crater drainage event that severely damaged vegetation in May of...

  16. Adaptive Drainage Slots for Acoustic Noise Attenuation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Cornerstone Research Group, Inc. (CRG), proposes to demonstrate feasibility in the reduction of noise attributed to drainage slots in jet engine acoustic liners....

  17. Shallow Melting and Underground Drainage in Utopia Planitia, Mars

    Science.gov (United States)

    Costard, F.; Sejourne, A.; Kargel, J.; Soare, R.

    2012-03-01

    Based on the identification of sinuous and elongated pits in Utopia Planitia, we suggest that shallow melting and underground drainage are possible. We test that hypothesis using a thermal model that comprises a thick insulating dusty layer.

  18. 13 Morphometric Analysis of Ogunpa and Ogbere Drainage Basins ...

    African Journals Online (AJOL)

    `123456789jkl''''#

    Morphometric Analysis of Ogunpa and Ogbere Drainage Basins, Ibadan, Nigeria. *Ajibade ... complex rock in Southwestern Nigeria. .... This work was based on map analysis ..... Bs = VI/HE where Bs = Basin slope, VI = Vertical Interval and.

  19. Mercury mine drainage and processes that control its environmental impact

    Science.gov (United States)

    Rytuba, J.J.

    2000-01-01

    Mine drainage from mercury mines in the California Coast Range mercury mineral belt is an environmental concern because of its acidity and high sulfate, mercury, and methylmercury concentrations. Two types of mercury deposits are present in the mineral belt, silica-carbonate and hot-spring type. Mine drainage is associated with both deposit types but more commonly with the silica-carbonate type because of the extensive underground workings present at these mines. Mercury ores consisting primarily of cinnabar were processed in rotary furnaces and retorts and elemental mercury recovered from condensing systems. During the roasting process mercury phases more soluble than cinnabar are formed and concentrated in the mine tailings, commonly termed calcines. Differences in mineralogy and trace metal geochemistry between the two deposit types are reflected in mine drainage composition. Silica-carbonate type deposits have higher iron sulfide content than hot- spring type deposits and mine drainage from these deposits may have extreme acidity and very high concentrations of iron and sulfate. Mercury and methylmercury concentrations in mine drainage are relatively low at the point of discharge from mine workings. The concentration of both mercury species increases significantly in mine drainage that flows through and reacts with calcines. The soluble mercury phases in the calcines are dissolved and sulfate is added such that methylation of mercury by sulfate reducing bacteria is enhanced in calcines that are saturated with mine drainage. Where mercury mine drainage enters and first mixes with stream water, the addition of high concentrations of mercury and sulfate generates a favorable environment for methylation of mercury. Mixing of oxygenated stream water with mine drainage causes oxidation of dissolved iron(II) and precipitation of iron oxyhydroxide that accumulates in the streambed. Both mercury and methylmercury are strongly adsorbed onto iron oxyhydroxide over the p

  20. Optical design of moon-based earth's plasmaspheric extreme ultraviolet imager%月基地球等离子体层极紫外成像仪的光学设计

    Institute of Scientific and Technical Information of China (English)

    陈波; 何飞

    2011-01-01

    According to the 30. 4 nm radiation properties of the earth' s plasmasphere, an earth' s plasmaspheric extreme ultraviolet imaging method based on the moon was researched for the first time. The technical parameters of the extreme ultraviolet imager used in the lunar surface were determined, and its field of view is 15°, angular resolution is 0. 1° and the entrance pupil area is larger than 70 cm2. By combining a single spherical multilayer mirror and a spherical microchannel plate photon counting imaging detector, the extrame ultraviolet imager was designed. The ray tracing of designed extreme ultraviolet imager with multilayer optics was also performed. Results show that the radii of the blur spots are 0. 210, 0. 204, 0. 204, and 0. 207 mm respectively at 0,3,5, and 7. 5°, which are basically identical at different field of views. In woking on the lunar surface, the imager has a visionscope of 15. 0 Re to cover the main body of the earth's plasmasphere and a spatial resolution of 0. 10 RE that can reveal the main details of the earth' s plasmasphere. It provides a high quality imaging method for the observation of earths plasmasphere.%依据地球等离子体层在30.4 nm的辐射特性,首次以月球为观测点进行地球等离子体层极紫外波段成像观测方法研究.确定了在月球表面使用的极紫外成像仪的技术参数,给出了视场角为15°、角分辨率为0.1°、入瞳面积>70 cm2的极紫外成像仪的结构形式,采用单球面多层膜反射镜与球面微通道板光子计数成像探测器相结合的方式设计了极紫外成像仪.对设计的极紫外多层膜光学系统成像仪进行光线追迹,弥散斑半径分别为0.210 mm(0°视场)、0.204 mm(3°视场)、0.204 mm(5°视场)、0.207 mm(7.5°视场),对应的角分辨率为0.08°,弥散斑在不同视场角度基本均匀,其结果满足设计要求.该仪器可在月球表面工作,获得视场范围为15.0 RE,覆盖地球等离子体层主

  1. Airway physiology, autogenic drainage, and active cycle of breathing.

    Science.gov (United States)

    Lapin, Craig D

    2002-07-01

    Airway clearance techniques are used to aid in mucus clearance in a variety of disease states. Autogenic drainage and active-cycle-of-breathing technique are 2 such modalities that rely heavily on basic airway physiology to enhance clearance. In this review I discuss the equal pressure point, huffing, and asynchronous and collateral ventilation, and review the literature and theory regarding autogenic drainage and active cycle of breathing. Selection of airway clearance techniques is discussed in the light of evidence-based medicine.

  2. Abdominal drainage following cholecystectomy: high, low, or no suction?

    OpenAIRE

    McCormack, T T; Abel, P D; Collins, C. D.

    1983-01-01

    A prospective trial to assess the effect of suction in an abdominal drain following cholecystectomy was carried out. Three types of closed drainage system were compared: a simple tube drain, a low negative pressure drain, and a high negative pressure drain: 120 consecutive patients undergoing cholecystectomy were randomly allocated to one of the three drainage groups. There was no significant difference in postoperative pyrexia, wound infection, chest infection, or hospital stay. This study f...

  3. Infected Baerveldt Glaucoma Drainage Device by Aspergillus niger

    Directory of Open Access Journals (Sweden)

    Nurul-Laila Salim

    2015-01-01

    Full Text Available Fungal endophthalmitis is rare but may complicate glaucoma drainage device surgery. Management is challenging as the symptoms and signs may be subtle at initial presentation and the visual prognosis is usually poor due to its resistant nature to treatment. At present there is lesser experience with intravitreal injection of voriconazole as compared to Amphotericin B. We present a case of successfully treated Aspergillus endophthalmitis following Baerveldt glaucoma drainage device implantation with intravitreal and topical voriconazole.

  4. Recycled crust in the Galápagos Plume source at 70 Ma: Implications for plume evolution

    Science.gov (United States)

    Trela, Jarek; Vidito, Christopher; Gazel, Esteban; Herzberg, Claude; Class, Cornelia; Whalen, William; Jicha, Brian; Bizimis, Michael; Alvarado, Guillermo E.

    2015-09-01

    Galápagos plume-related lavas in the accreted terranes of the Caribbean and along the west coast of Costa Rica and Panama provide evidence on the evolution of the Galápagos mantle plume, specifically its mantle temperature, size and composition of heterogeneities, and dynamics. Here we provide new 40Ar/39Ar ages, major and trace element data, Sr-Nd-Pb isotopic compositions, and high-precision olivine analyses for samples from the Quepos terrane (Costa Rica) to closely examine the transitional phase of the Galápagos Plume from Large Igneous Province (LIP) to ocean island basalt (OIB) forming stages. The new ages indicate that the record of Quepos volcanism began at 70 Ma and persisted for 10 Ma. Petrological evidence suggests that the maximum mantle potential temperature (Tp) of the plume changed from ∼1650° to ∼1550 °C between 90-70 Ma. This change correlates with a dominant pyroxenite component in the Galapagos source as indicated by high Ni and Fe/Mn and low Ca olivines relative to those that crystallized in normal peridotite derived melts. The decrease in Tp also correlates with an increase in high-field strength element enrichments, e.g., Nb/Nb*, of the erupted lavas. Radiogenic isotope ratios (Nd-Pb) suggest that the Quepos terrane samples have intermediate (Central Domain) radiogenic signatures. The Galápagos plume at 70 Ma represents elevated pyroxenite melt productivity relative to peridotite in a cooling lithologically heterogeneous mantle.

  5. Energy balance of a laser ablation plume expanding in a background gas

    DEFF Research Database (Denmark)

    Amoruso, Salvatore; Schou, Jørgen; Lunney, James G.

    2010-01-01

    The energy balance of a laser ablation plume in an ambient gas for nanosecond pulses has been investigated on the basis of the model of Predtechensky and Mayorov (PM), which provides a relatively simple and clear description of the essential hydrodynamics. This approach also leads to an insightful...... description in dimensionless units of how the initial kinetic energy of the plume is dissipated into kinetic and thermal energy of the background gas. Eventually when the plume has stopped, the initial kinetic energy of the plume is converted into thermal energy of the plume and background gas....

  6. Monitoring the Amazon plume northwestward transport along Lagrangian pathways

    Science.gov (United States)

    Fournier, Severine; Gaultier, Lucile; Vandemark, Douglas; Lee, Tong; Gierach, Michelle

    2016-04-01

    Large rivers are important to marine air-sea interactions and local biogeochemistry. By modifying the local and regional sea surface salinity (SSS), the freshwater inputs associated with major river plumes cause the formation of a layer near the surface with salinity stratification but near-uniform temperature, known as the barrier layer (BL). The BL prevent exchanges between the warm mixed layer and the cold ocean interior, and thus affect the vertical mixing of heat between the mixed layer and the thermocline. This can have an important impact on air-sea interactions such as hurricanes intensification. Our study focuses on the Amazon and Orinoco rivers, respectively the first and fourth world's largest rivers in terms of discharge. Amazon-Orinoco waters are carried northwestward by the North Brazilian Current (NBC) during the first part of the year and then eastward along the North Equatorial Counter Current. The hurricane season in the tropical Atlantic extends from June through November, the period of Amazon-Orinoco plume maximum northwestward extension, on a hurricane route. Being able to monitor the spatial and temporal dispersal of the Amazon and Orinoco river plumes is therefore important to better understand their impact on barrier layer thickness and SST variation at seasonal to interannual time scales. Variations from year to year in spatial extent of the plume may result from several processes including changes in Amazon discharge, ocean advection, turbulent mixing, and wind field. Satellite remote sensing data provide several means to visualize the surface dispersal of the Amazon plume, with ocean color data being the first to track it in the tropical Atlantic ocean further than 1000 km from shore. With the launches of the ESA Soil Moisture and Ocean Salinity (SMOS) and the NASA Aquarius/SAC-D missions, we are now able to use the SSS observations in combination with ocean color, altimetry and sea surface temperature observations to track surface plume

  7. Percutaneous transhepatic biliary drainage: analysis of 175 cases

    Energy Technology Data Exchange (ETDEWEB)

    Suh, Kyung Jin; Lee, Sang Kwon; Kim, Tae Hun; Kim, Yong Joo; Kang, Duk Sik [College of Medicine, Kyungpook National Univ., Daegu (Korea, Republic of)

    1990-10-15

    Percutaneous transhepatic biliary drainage is a safe, effective and palliative means of treatment in biliary obstruction, especially in cases with malignant obstruction which are inoperable. 175 cases of transhepatic biliary drainage were performed on 119 patients with biliary obstruction from January 1985 to June 1989 at Kyung-pook National University Hospital. The causes of obstructive jaundice were 110 malignant diseases and 9 benign diseases. The most common indication for drainage was palliative intervention of obstruction secondary to malignant tumor in 89 cases. 86 cases of external drainage were performed including 3 cases of left duct approach, 29 cases of external-internal drainage and 60 cases of endoprosthesis. In external and external-internal drainages, immediate major complications (11.9%) occurred, including not restricted to, but sepsis, bile peritonitis and hemobilia. Delayed major complications (42.9%) were mainly catheter related. The delayed major complication of endoprosthesis resulted from obstruction of the internal stent. The mean time period to reobstruction of the internal stent was about 12 weeks. To improve management status, regular follow-up is required, as is education of both patients and their families as to when immediate clinical attention is mandated. Close communication amongst the varying medical specialities involved will be necessary to provide optional treatment for each patient.

  8. Percutaneous catheter drainage of intraabdominal abscesses and fluid

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Tae; Kwon, Tae Hee; Yoo, Hyung Sik; Suh, Jung Ho [Yonsei University College of Medicine, Seoul (Korea, Republic of); Lee, Young Ho [Cheil General Hospital, Seoul (Korea, Republic of)

    1986-10-15

    Percutaneous catheter drainage has been reported to be an effective method in the management of selected patients with abscess and fluid collection. Its high success rate and relatively low complications make the procedure an alternative to surgery in the individual cases. During past two years percutaneous catheter drainage in 25 patients with intraabdominal abscesses and fluid collection was performed at the Department of Radiology, Yonsei University College of medicine. Here the technique and author's results were summarized. 1. The total 25 patients who had percutaneous catheter drainage are 10 liver abscesses, 3 subphrenic, one subhepatic, 4 renal and perirenal, 2 pelvic, one psoas, one anterior pararenal fluid from acute pancreatitis, one pancreas pseudocyst and 2 malignant tumor necrosis. 2. The modified Seldinger technique used for all cases of abscess and fluid drainage under guidance of ultrasound scan. The used catheters were 10F. Pigtail and 14F. Malecot (Cook c/o) catheters. 3. The abscesses and fluid of 17 patients among 25 were cured by the percutaneous catheter drainage and 4 patients were clinically improved. The catheter drainage was failed in 2 patients and 3 complication were developed. 4. The success rate of this procedure was 91.3%, failure rate was 8.7% and complication rate was 12%.

  9. Effects of drainage salinity evolution on irrigation management

    Science.gov (United States)

    Kan, Iddo

    2003-12-01

    A soil physics theory of solute movement through a drained saturated zone underlying agricultural land is introduced into a long-term economic analysis of farm-level irrigation management; this is an alternative to the immediate, homogeneous blending assumption employed in previous studies as a base for calculating changes in drainage salinity over time. Using data from California, the effect of drainage salinity evolution is analyzed through a year-by-year profit optimization under the requirement of on-farm drainage disposal. Paths of optimal land allocation among crop production with fresh surface water, saline drainage reuse and evaporation ponds appear to depend on the relative profitability of the first two; that of reuse is affected by the trend of drainage salinity. Tile spacing and environmental regulations associated with evaporation ponds affect the timing of evaporation pond construction. The system converges into a solution involving both drainage-disposal activities; this solution includes an outlet for salts and is therefore sustainable. Following this strategy, the system is asymptotically approaching a steady state that possesses both hydrological and salt balances. Economic implications associated with land retirement programs in California are discussed.

  10. A cost comparison of traditional drainage and SUDS in Scotland.

    Science.gov (United States)

    Duffy, A; Jefferies, C; Waddell, G; Shanks, G; Blackwood, D; Watkins, A

    2008-01-01

    The Dunfermline Eastern Expansion (DEX) is a 350 ha mixed development which commenced in 1996. Downstream water quality and flooding issues necessitated a holistic approach to drainage planning and the site has become a European showcase for the application of Sustainable Urban Drainage Systems (SUDS). However, there is minimal data available regarding the real costs of operating and maintaining SUDS to ensure they continue to perform as per their design function. This remains one of the primary barriers to the uptake and adoption of SUDS. This paper reports on what is understood to be the only study in the UK where actual costs of constructing and maintaining SUDS have been compared to an equivalent traditional drainage solution. To compare SUDS costs with traditional drainage, capital and maintenance costs of underground storage chambers of analogous storage volumes were estimated. A whole life costing methodology was then applied to data gathered. The main objective was to produce a reliable and robust cost comparison between SUDS and traditional drainage. The cost analysis is supportive of SUDS and indicates that well designed and maintained SUDS are more cost effective to construct, and cost less to maintain than traditional drainage solutions which are unable to meet the environmental requirements of current legislation. (c) IWA Publishing 2008.

  11. Helium, heat, and the generation of hydrothermal event plumes at mid-ocean ridges

    Science.gov (United States)

    Lupton, John E.; Baker, Edward T.; Massoth, Gary J.

    1999-09-01

    Hydrothermal event plumes are unique water-column features observed over mid-ocean ridges, presumably generated by the sudden release of large volumes of hot, buoyant fluid. Although the specifics of event plume generation are unknown, event plumes have been attributed to the rapid emptying of a hydrothermal reservoir or to rapid heat extraction from a recently emplaced dike or seafloor lava flows. The chemical and thermal signatures of event plumes as compared to the underlying steady-state plumes offer important clues to the generation of event plumes. Event plumes have low 3He/heat ratios of ˜0.4 × 10-17 mol J-1, similar to vent fluids from mature hydrothermal systems. In contrast, the steady-state plumes found beneath the event plumes have elevated and variable 3He/heat ratios of 2 to 5 × 10-17 mol J-1. Fluids collected directly over fresh lava flows have even higher 3He/heat ratios of 2 to 8 × 10-17 mol J-1, up to 30 times the event plume values. These disparate 3He/heat ratios place strong constraints on models of event plume generation, especially models which rely on heat extraction from seafloor eruptions. Published by Elsevier Science B.V.

  12. 21 CFR 878.4200 - Introduction/drainage catheter and accessories.

    Science.gov (United States)

    2010-04-01

    ... catheters (including dialysis), and other general surgical catheters. An introduction/drainage catheter... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Introduction/drainage catheter and accessories... Introduction/drainage catheter and accessories. (a) Identification. An introduction/drainage catheter is a...

  13. Water-magma interaction and plume processes in the 2008 Okmok eruption, Alaska

    Science.gov (United States)

    Unema, Joel; Ort, Michael H.; Larsen, Jessica D; Neal, Christina; Schaefer, Janet R.

    2016-01-01

    Eruptions of similar explosivity can have divergent effects on the surroundings due to differences in the behavior of the tephra in the eruption column and atmosphere. Okmok volcano, located on Umnak Island in the eastern Aleutian Islands, erupted explosively between 12 July and 19 August 2008. The basaltic andesitic eruption ejected ∼0.24 km3dense rock equivalent (DRE) of tephra, primarily directed to the northeast of the vent area. The first 4 h of the eruption produced dominantly coarse-grained tephra, but the following 5 wk of the eruption deposited almost exclusively ash, much of it very fine and deposited as ash pellets and ashy rain and mist. Meteorological storms combined with abundant plume water to efficiently scrub ash from the eruption column, with a rapid decrease in deposit thickness with distance from the vent. Grain-size analysis shows that the modes (although not their relative proportions) are very constant throughout the deposit, implying that the fragmentation mechanisms did not vary much. Grain-shape features consistent with molten fuel-coolant interaction are common. Surface and groundwater drainage into the vents provided the water for phreatomagmatic fragmentation. The available water (water that could reach the vent area during the eruption) was ∼2.8 × 1010 kg, and the erupted magma totaled ∼7 × 1011 kg, which yield an overall water:magma mass ratio of ∼0.04, but much of the water was not interactive. Although magma flux dropped from 1 × 107 kg/s during the initial 4 h to 1.8 × 105 kg/s for the remainder of the eruption, most of the erupted material was ejected during the lower-mass-flux period due to its much greater length, and this tephra was dominantly deposited within 10 km downwind of the vent. This highlights the importance of ash scrubbing in the evaluation of hazards from explosive eruptions.

  14. Towards Simulating Non-Axisymmetric Influences on Aircraft Plumes for Signature Prediction

    Science.gov (United States)

    Kenzakowski, D. C.; Shipman, J. D.; Dash, S. M.

    2000-01-01

    A methodology for efficiently including three-dimensional effects on aircraft plume signature is presented. First, exploratory work on the use of passive mixing enhancement devices, namely chevrons and tabs, in IR signature reduction for external turbofan plumes is demonstrated numerically and experimentally. Such small attachments, when properly designed, cause an otherwise axisymmetric plume to have significant 3D structures, affecting signature prediction. Second, an approach for including non-axisymmetric and installation effects in plume signature prediction is discussed using unstructured methodology. Unstructured flow solvers, using advanced turbulence modeling and plume thermochemistry, facilitate the modeling of aircraft effects on plume structure that previously have been neglected due to gridding complexities. The capabilities of the CRUNCH unstructured Navier-Stokes solver for plume modeling is demonstrated for a passively mixed turbofan nozzle, a generic fighter nozzle, and a complete aircraft.

  15. Wedge Shock and Nozzle Exhaust Plume Interaction in a Supersonic Jet Flow

    Science.gov (United States)

    Castner, Raymond; Zaman, Khairul; Fagan, Amy; Heath, Christopher

    2014-01-01

    Fundamental research for sonic boom reduction is needed to quantify the interaction of shock waves generated from the aircraft wing or tail surfaces with the nozzle exhaust plume. Aft body shock waves that interact with the exhaust plume contribute to the near-field pressure signature of a vehicle. The plume and shock interaction was studied using computational fluid dynamics and compared with experimental data from a coaxial convergent-divergent nozzle flow in an open jet facility. A simple diamond-shaped wedge was used to generate the shock in the outer flow to study its impact on the inner jet flow. Results show that the compression from the wedge deflects the nozzle plume and shocks form on the opposite plume boundary. The sonic boom pressure signature of the nozzle exhaust plume was modified by the presence of the wedge. Both the experimental results and computational predictions show changes in plume deflection.

  16. The impact of glacier geometry on meltwater plume structure and submarine melt in Greenland fjords

    Science.gov (United States)

    Carroll, D.; Sutherland, D. A.; Hudson, B.; Moon, T.; Catania, G. A.; Shroyer, E. L.; Nash, J. D.; Bartholomaus, T. C.; Felikson, D.; Stearns, L. A.; Noël, B. P. Y.; Broeke, M. R.

    2016-09-01

    Meltwater from the Greenland Ice Sheet often drains subglacially into fjords, driving upwelling plumes at glacier termini. Ocean models and observations of submarine termini suggest that plumes enhance melt and undercutting, leading to calving and potential glacier destabilization. Here we systematically evaluate how simulated plume structure and submarine melt during summer months depends on realistic ranges of subglacial discharge, glacier depth, and ocean stratification from 12 Greenland fjords. Our results show that grounding line depth is a strong control on plume-induced submarine melt: deep glaciers produce warm, salty subsurface plumes that undercut termini, and shallow glaciers produce cold, fresh surface-trapped plumes that can overcut termini. Due to sustained upwelling velocities, plumes in cold, shallow fjords can induce equivalent depth-averaged melt rates compared to warm, deep fjords. These results detail a direct ocean-ice feedback that can affect the Greenland Ice Sheet.

  17. Leachate plume delineation and lithologic profiling using surface resistivity in an open municipal solid waste dumpsite, Sri Lanka.

    Science.gov (United States)

    Wijesekara, Hasintha Rangana; De Silva, Sunethra Nalin; Wijesundara, Dharani Thanuja De Silva; Basnayake, Bendict Francis Antony; Vithanage, Meththika Suharshini

    2015-01-01

    This study presents the use of direct current resistivity techniques (DCRT) for investigation and characterization of leachate-contaminated subsurface environment of an open solid waste dumpsite at Kandy, Sri Lanka. The particular dumpsite has no liner and hence the leachate flows directly to the nearby river via subsurface and surface channels. For the identification of possible subsurface flow paths and the direction of the leachate, DCRT (two-dimensional, three-dimensional and vertical electrical sounding) have been applied. In addition, the physico-chemical parameters such as pH, electrical conductivity (EC), alkalinity, hardness, chloride, chemical oxygen demand (COD) and total organic carbon (TOC) of leachate collected from different points of the solid waste dumping area and leachate drainage channel were analysed. Resistivity data confirmed that the leachate flow is confined to the near surface and no separate plume is observed in the downstream area, which may be due to the contamination distribution in the shallow overburden thickness. The stratigraphy with leachate pockets and leachate plume movements was well demarcated inside the dumpsite via low resistivity zones (1-3 Ωm). The recorded EC, alkalinity, hardness and chloride contents in leachate were averaged as 14.13 mS cm⁻¹, 3236, 2241 and 320 mg L⁻¹, respectively, which confirmed the possible causes for low resistivity values. This study confirms that DCRT can be effectively utilized to assess the subsurface characteristics of the open dumpsites to decide on corridor placement and depth of permeable reactive barriers to reduce the groundwater contamination.

  18. Surgical vs ultrasound-guided drainage of deep neck space abscesses: a randomized controlled trial: surgical vs ultrasound drainage

    OpenAIRE

    2013-01-01

    Introduction Deep neck space abscesses (DNAs) are relatively common otolaryngology-head and neck surgery emergencies and can result in significant morbidity with potential mortality. Traditionally, surgical incision and drainage (I&D) with antibiotics has been the mainstay of treatment. Some reports have suggested that ultrasound-guided drainage (USD) is a less invasive and effective alternative in select cases. Objectives To compare I&D vs USD of well-defined DNAs, using a randomized control...

  19. Sensitivity of drainage efficiency of cranberry fields to edaphic conditions

    Science.gov (United States)

    Periard, Yann; José Gumiere, Silvio; Rousseau, Alain N.; Caron, Jean; Hallema, Dennis W.

    2014-05-01

    Water management on a cranberry farm requires intelligent irrigation and drainage strategies to sustain strong productivity and minimize environmental impact. For example, to avoid propagation of disease and meet evapotranspiration demand, it is imperative to maintain optimal moisture conditions in the root zone, which depends on an efficient drainage system. However, several drainage problems have been identified in cranberry fields. Most of these drainage problems are due to the presence of a restrictive layer in the soil profile (Gumiere et al., 2014). The objective of this work is to evaluate the effects of a restrictive layer on the drainage efficiency by the bias of a multi-local sensitivity analysis. We have tested the sensitivity of the drainage efficiency to different input parameters set of soil hydraulic properties, geometrical parameters and climatic conditions. Soil water flux dynamic for every input parameters set was simulated with finite element model Hydrus 1D (Simanek et al., 2008). Multi-local sensitivity was calculated with the Gâteaux directional derivatives with the procedure described by Cheviron et al. (2010). Results indicate that drainage efficiency is more sensitive to soil hydraulic properties than geometrical parameters and climatic conditions. Then, the geometrical parameters of the depth are more sensitive than the thickness. The drainage efficiency was very insensitive to the climatic conditions. Understanding the sensitivity of drainage efficiency according to soil hydraulic properties, geometrical and climatic conditions are essential for diagnosis drainage problems. However, it becomes important to identify the mechanisms involved in the genesis of anthropogenic soils cranberry to identify conditions that may lead to the formation of a restrictive layer. References: Cheviron, B., S.J. Gumiere, Y. Le Bissonnais, R. Moussa and D. Raclot. 2010. Sensitivity analysis of distributed erosion models: Framework. Water Resources Research

  20. Drainage pits in cohesionless materials: implications for surface of Phobos.

    Science.gov (United States)

    Horstman, K C; Melosh, H J

    1989-09-10

    Viking orbiter images show grooves and chains of pits crossing the surface of Phobos, many of which converge toward the large crater Stickney or its antipode. Although it has been proposed that the pits and grooves are chains of secondary craters, their morphology and geometric relations suggest that they are the surface traces of fractures in the underlying solid body of Phobos. Several models have been proposed to explain the pits, of which the most plausible are gas venting and drainage of regolith into open fractures. the latter mechanism is best supported by the image data and is the mechanism studied in this investigation. Drainage pits and fissures are modeled experimentally by using two rigid substrate plates placed edge to edge and covered by uniform thicknesses of dry fragmental debris (simulated regolith). Fracture extension is simulated by drawing the plates apart, allowing drainage of regolith into the newly created void. A typical drainage experiment begins with a shallow depression on the surface of the regolith, above the open fissure. Increased drainage causes local drainage pits to form; continued drainage causes the pits to coalesce, forming a cuspate groove. The resulting experimental patterns of pits and grooves have pronounced similarities to those observed on Phobos. Characteristics such as lack of raised rims, linearity of grooves and chains of pits, uniform spacing of pits, and progression from discrete pits to cuspate grooves are the same in the experiments and on Phobos. In contrast, gas-venting pits occur in irregular chains and have raised rims. These experiments thus indicate that the Phobos grooves and pits formed as drainage structures. The pit spacing in an experiment is measured at the time that the maximum number of pits forms, prior to groove development. The average pit spacing is compared to the regolith thickness for each material. Regression line fits indicate that the average spacing of drainage pits in unconsolidated