WorldWideScience

Sample records for plasma treatment system

  1. A plasma-arc pyrolysis system for hazardous waste treatment

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ A laboratory system for the treatment of medical and hazardous wastes via AC plasma-arc pyrolysis was recently built up by a research team led by Prof. SHENG Hongzhi at the CAS Institute of Mechanics (IMECH) in Beijing.

  2. plasma treatment

    Directory of Open Access Journals (Sweden)

    Puač Nevena

    2014-11-01

    Full Text Available In this paper we will present results for plasma sterilization of planktonic samples of two reference strains of bacteria, Pseudomonas aeruginosa ATCC 27853 and Enterococcus faecalis ATCC 29212. We have used a plasma needle as a source of non-equilibrium atmospheric plasma in all treatments. This device is already well characterized by OES, derivative probes and mass spectrometry. It was shown that power delivered to the plasma is bellow 2 W and that it produces the main radical oxygen and nitrogen species believed to be responsible for the sterilization process. Here we will only present results obtained by electron paramagnetic resonance which was used to detect the OH, H and NO species. Treatment time and power delivered to the plasma were found to have the strongest influence on sterilization. In all cases we have observed a reduction of several orders of magnitude in the concentration of bacteria and for the longest treatment time complete eradication. A more efficient sterilization was achieved in the case of gram negative bacteria.

  3. Development of High-Throughput Liquid Treatment System using Slot Antenna Excited Microwave Plasma

    Science.gov (United States)

    Takitou, Sho; Ito, Michiko; Takashima, Seigou; Nomura, Norio; Kitagawa, Tominori; Toyoda, Hirotaka

    2015-09-01

    Recently, much attention has been given to plasma production under liquid and its industrial applications as well as investigation of chemical reactions as a result of plasma-liquid interactions. In various kinds of plasma production techniques, we have proposed pulsed microwave excited plasma using slot antenna, where damage to the slot electrode can be minimized and plasma volume can be increased. Furthermore, we have proposed an in-line microwave plasma system where plasma is efficiently produced under reduced pressures using Venturi effect, and have demonstrated enhancement of organic decomposition efficiency. For practical use of the plasma liquid treatment, however, cost-effective and more efficient treatment system with high treatment capability is required. In this study, we propose further enhancement of the treatment speed by designing four-parallel-type liquid treatment device where four discharges for the treatment are performed using one microwave power source. Decomposition speed of newly-developed plasma system is investigated. Not only high decomposition rate but also enhanced energy efficiency is realized.

  4. Hydrophobization of polymer particles by tetrafluoromethane (CF{sub 4}) plasma irradiation using a barrel-plasma-treatment system

    Energy Technology Data Exchange (ETDEWEB)

    Matsubara, Keisuke; Danno, Masato; Inoue, Mitsuhiro; Nishizawa, Hideki; Honda, Yuji; Abe, Takayuki, E-mail: tabe@ctg.u-toyama.ac.jp

    2013-11-01

    In this study, tetrafluoromethane (CF{sub 4}) plasma-treatments of polymethylmethacrylate (PMMA) powder were performed using a polygonal barrel-plasma-treatment system to improve the PMMA's hydrophobicity. Characterization of the treated samples showed that the PMMA particle surfaces were fluorinated by the CF{sub 4} treatment. The smooth surfaces of the particles changed into nano-sized worm-like structures after the plasma-treatment. The hydrophobicity of the treated PMMA samples was superior to that of the untreated samples. It was noted that the hydrophobicity of the treated samples and the surface fluorination level depended on the plasma-treatment time and radiofrequency (RF) power; high RF power increased the sample temperature, which in turn decreased the hydrophobicity of the treated samples and the surface fluorination because of the thermal decomposition of PMMA. The water-repellent effects were evaluated by using paper towels to show the application of the plasma-treated PMMA particles, with the result that the paper towel coated with the treated sample was highly water-repellent.

  5. Plasma treatment advantages for textiles

    CERN Document Server

    Sparavigna, Amelia

    2008-01-01

    The textile industry is searching for innovative production techniques to improve the product quality, as well as society requires new finishing techniques working in environmental respect. Plasma surface treatments show distinct advantages, because they are able to modify the surface properties of inert materials, sometimes with environment friendly devices. For fabrics, cold plasma treatments require the development of reliable and large systems. Such systems are now existing and the use of plasma physics in industrial problems is rapidly increasing. On textile surfaces, three main effects can be obtained depending on the treatment conditions: the cleaning effect, the increase of microroughness (anti-pilling finishing of wool) and the production of radicals to obtain hydrophilic surfaces. Plasma polymerisation, that is the deposition of solid polymeric materials with desired properties on textile substrates, is under development. The advantage of such plasma treatments is that the modification turns out to ...

  6. Demonstration plasma gasification/vitrification system for effective hazardous waste treatment.

    Science.gov (United States)

    Moustakas, K; Fatta, D; Malamis, S; Haralambous, K; Loizidou, M

    2005-08-31

    Plasma gasification/vitrification is a technologically advanced and environmentally friendly method of disposing of waste, converting it to commercially usable by-products. This process is a drastic non-incineration thermal process, which uses extremely high temperatures in an oxygen-starved environment to completely decompose input waste material into very simple molecules. The intense and versatile heat generation capabilities of plasma technology enable a plasma gasification/vitrification facility to treat a large number of waste streams in a safe and reliable manner. The by-products of the process are a combustible gas and an inert slag. Plasma gasification consistently exhibits much lower environmental levels for both air emissions and slag leachate toxicity than other thermal technologies. In the framework of a LIFE-Environment project, financed by Directorate General Environment and Viotia Prefecture in Greece, a pilot plasma gasification/vitrification system was designed, constructed and installed in Viotia Region in order to examine the efficiency of this innovative technology in treating industrial hazardous waste. The pilot plant, which was designed to treat up to 50kg waste/h, has two main sections: (i) the furnace and its related equipment and (ii) the off-gas treatment system, including the secondary combustion chamber, quench and scrubber.

  7. Plasma treatment of onychomycosis

    Science.gov (United States)

    Xiong, Zilan; Roe, Jeff; Grammer, Tim; Him, Yeon-Ho; Graves, David B.

    2015-09-01

    Onychomycosis or fungal infection of the toenail or fingernail is a common affliction. Approximately 10% of the world's adult population is estimated to suffer from onychomycosis. Current treatment options such as topical creams, oral drugs, or laser treatments are generally limited by a variety of problems. We present results for an alternative onychomycosis treatment scheme using atmospheric pressure cold air plasmas. Using thinned cow hoof as a model nail material, we tested the ability of various plasma sources to act through the model nail to eradicate either bacteria or fungus deposited on the opposite side. Following 20 minute exposure to a surface microdischarge (SMD) device operating in room air, we observed a ~ 2 log reduction of E. coli. A similar result was obtained against T. rubrum after 45 min plasma treatment. NOx species concentration penetrating through the model nail as well as uptake into the nail were measured as a function of nail thickness. We propose that these plasma-generated species, or perhaps their reaction products, are responsible for at least part of the observed anti-microbial effect. We also explore the use of ultraviolet light acting in synergy with plasma-generated chemical species.

  8. High Throughput Plasma Water Treatment

    Science.gov (United States)

    Mujovic, Selman; Foster, John

    2016-10-01

    The troublesome emergence of new classes of micro-pollutants, such as pharmaceuticals and endocrine disruptors, poses challenges for conventional water treatment systems. In an effort to address these contaminants and to support water reuse in drought stricken regions, new technologies must be introduced. The interaction of water with plasma rapidly mineralizes organics by inducing advanced oxidation in addition to other chemical, physical and radiative processes. The primary barrier to the implementation of plasma-based water treatment is process volume scale up. In this work, we investigate a potentially scalable, high throughput plasma water reactor that utilizes a packed bed dielectric barrier-like geometry to maximize the plasma-water interface. Here, the water serves as the dielectric medium. High-speed imaging and emission spectroscopy are used to characterize the reactor discharges. Changes in methylene blue concentration and basic water parameters are mapped as a function of plasma treatment time. Experimental results are compared to electrostatic and plasma chemistry computations, which will provide insight into the reactor's operation so that efficiency can be assessed. Supported by NSF (CBET 1336375).

  9. Choline treatment affects the liver reticuloendothelial system and plasma fatty acid composition in diabetic rats.

    Science.gov (United States)

    Al-Saeedi, Fatma J; Cheng, Behling

    2013-07-01

    This study investigated effects of choline treatment on hepatic reticuloendothelial and biliary functions and plasma fatty acid composition in diabetic rats. Diabetes was induced by streptozotocin (STZ). Choline was administered to untreated rats and a portion of STZ-treated rats for two sequences of five consecutive days, separated by a 2-day interval. Hepatic functions were studied using (99m) Tc Tin (II) colloid (TIN) and 99 mTc mebrofenin [bromo-iminodiacetic acid (BrIDA)] imaging. The TIN-uptake ratios (organ/whole body) of heart, liver and spleen, and the BrIDA-uptake ratios (organ or tissue/whole body) of liver, biliary tree and abdomen were obtained following imaging studies. Fatty acids were analysed by GC/MS. Choline treatment did not attenuate hyperglycaemic development. Diabetic rats showed (i) a decreased TIN-uptake ratio in liver with co-increased ratios in heart and spleen; choline treatment diminished these changes, (ii) elevated BrIDA-uptake ratios in biliary tree and abdomen but not in liver; choline treatment did not attenuate the elevations and (iii) decreases in plasma palmitoleic acid and oleic acid, reflecting an impaired stearoyl-CoA desaturase function; choline treatment did not affect the diminutions, but caused a decrease in arachidonic acid with a co-increase in linoleic acid. Some rats developed hypoproteinemia (HPO). HPO rats also exhibited decreases in plasma palmitoleic acid and oleic acid. Diabetes caused almost absence of palmitoleic acid in HPO rats. Choline treatment exerted no effect on the plasma fatty acid composition of diabetic HPO rats. Choline treatment affected hepatic reticuloendothelial function and plasma fatty acid composition, but not hepatobiliary function, in diabetic rats. Whether choline treatment is beneficial requires further studies. © 2013 The Authors Clinical Physiology and Functional Imaging © 2013 Scandinavian Society of Clinical Physiology and Nuclear Medicine.

  10. Plasma treatment of crane rails

    Directory of Open Access Journals (Sweden)

    Владислав Олександрович Мазур

    2016-07-01

    Full Text Available Crane operation results in wear and tear of rails and crane wheels. Renovation and efficiency of these details is therefore relevant. Modern technologies of wheels and rails restoration use surfacing or high-frequency currents treatment. Surface treatment with highly concentrated streams of energy- with a laser beam, plasma jet- is a promising direction.. It is proposed to increase the efficiency of crane rails by means of surface plasma treatment. The modes of treatment have been chosen.. Modelling of plasma jet thermal impact on a solid body of complex shape has been made. Plasma hardening regimes that meet the requirements of production have been defined. Structural transformation of the material in the crane rails on plasma treatment has been investigated. It has been concluded that for carbon and low alloy crane steels the plasma exposure zone is characterized by a high degree of hardened structure dispersion and higher hardness as compared to the hardness after high-frequency quenching. As this takes place phase transformations are both shift (in the upper zone of plasma influence and fluctuation (in the lower zone of the plasma. With high-speed plasma heating granular or lamellar pearlite mainly transforms into austenite. The level of service characteristics of hardened steel, which is achieved in this case is determined by the kinetics and completeness of pearlite → austenite transformation. For carbon and low alloy rail steels plasma hardening can replace bulk hardening, hardening by high-frequency currents, or surfacing. The modes for plasma treatment which make it possible to obtain a surface layer with a certain service characteristics have been defined

  11. Efficacy of fractionated plasma separation and adsorption system (Prometheus) for treatment of liver failure due to mushroom poisoning.

    Science.gov (United States)

    Vardar, Rukiye; Gunsar, Fulya; Ersoz, Galip; Akarca, Ulus Salih; Karasu, Zeki

    2010-01-01

    Consuming wild mushrooms is an ordinary habit in late summer and autumn in our region. Every year, several cases of hepatic toxicity secondary to mushroom poisoning are observed because of poor identification of the mushrooms. Unfortunately some of them are fatal. Prometheus system is a newly developed extracorporeal liver support device for fractionated plasma separation and adsorption (FPSA) that enables removal of albumin-bound and water-soluble toxins. Therefore, it may be a promising treatment option for patients with liver failure due to mushroom poisoning. We studied 8 patients with mushroom poisoning. All patients underwent 1 to 4 consecutive FPSA (Prometheus)-system in addition to medical and supportive treatment such as fluid replacement, Penicillin G, N-acetylcysteine (NAC) and silymarin. A variety of clinical and biochemical parameters were assessed. We had improvement of the biochemical parameters after first treatment with FPSA-system. Seven of 8 patients survived and were discharged to resume an independent life. One patient who had grade III encephalopathy when admitted to hospital died. No major adverse events were observed during the application of this therapy modality. FPSA-system may be a safe and effective treatment option for patient with mushroom poisoning. Early hospitalization is essential in order to be successful. Controlled studies are needed to evaluate the efficacy of this new treatment choice on survival of patients with acute liver failure (ALF) due to mushroom poisoning.

  12. Plasma reactor waste management systems

    Science.gov (United States)

    Ness, Robert O., Jr.; Rindt, John R.; Ness, Sumitra R.

    1992-01-01

    The University of North Dakota is developing a plasma reactor system for use in closed-loop processing that includes biological, materials, manufacturing, and waste processing. Direct-current, high-frequency, or microwave discharges will be used to produce plasmas for the treatment of materials. The plasma reactors offer several advantages over other systems, including low operating temperatures, low operating pressures, mechanical simplicity, and relatively safe operation. Human fecal material, sunflowers, oats, soybeans, and plastic were oxidized in a batch plasma reactor. Over 98 percent of the organic material was converted to gaseous products. The solids were then analyzed and a large amount of water and acid-soluble materials were detected. These materials could possibly be used as nutrients for biological systems.

  13. Solar system plasma waves

    Science.gov (United States)

    Gurnett, Donald A.

    1995-01-01

    An overview is given of spacecraft observations of plasma waves in the solar system. In situ measurements of plasma phenomena have now been obtained at all of the planets except Mercury and Pluto, and in the interplanetary medium at heliocentric radial distances ranging from 0.29 to 58 AU. To illustrate the range of phenomena involved, we discuss plasma waves in three regions of physical interest: (1) planetary radiation belts, (2) planetary auroral acceleration regions and (3) the solar wind. In each region we describe examples of plasma waves that are of some importance, either due to the role they play in determining the physical properties of the plasma, or to the unique mechanism involved in their generation.

  14. Plasma Treatments and Biomass Gasification

    Science.gov (United States)

    Luche, J.; Falcoz, Q.; Bastien, T.; Leninger, J. P.; Arabi, K.; Aubry, O.; Khacef, A.; Cormier, J. M.; Lédé, J.

    2012-02-01

    Exploitation of forest resources for energy production includes various methods of biomass processing. Gasification is one of the ways to recover energy from biomass. Syngas produced from biomass can be used to power internal combustion engines or, after purification, to supply fuel cells. Recent studies have shown the potential to improve conventional biomass processing by coupling a plasma reactor to a pyrolysis cyclone reactor. The role of the plasma is twofold: it acts as a purification stage by reducing production of tars and aerosols, and simultaneously produces a rich hydrogen syngas. In a first part of the paper we present results obtained from plasma treatment of pyrolysis oils. The outlet gas composition is given for various types of oils obtained at different experimental conditions with a pyrolysis reactor. Given the complexity of the mixtures from processing of biomass, we present a study with methanol considered as a model molecule. This experimental method allows a first modeling approach based on a combustion kinetic model suitable to validate the coupling of plasma with conventional biomass process. The second part of the paper is summarizing results obtained through a plasma-pyrolysis reactor arrangement. The goal is to show the feasibility of this plasma-pyrolysis coupling and emphasize more fundamental studies to understand the role of the plasma in the biomass treatment processes.

  15. Plasma-exchange in the treatment of systemic rheumatic diseases: past and present experience

    Directory of Open Access Journals (Sweden)

    P. Marson

    2011-06-01

    Full Text Available La terapia con plasma-exchange (PEx è stata utilizzata sin dagli anni Settanta per la cura di molteplici malattie, nella cui patogenesi fattori umorali si riteneva potessero giocare un ruolo di rilievo. Questa modalità di trattamento comporta la rimozione di autoanticorpi, immunocomplessi circolanti, molecole di adesione, citochine, chemochine ed altri mediatori solubili implicati nello sviluppo del danno tissutale (1. Nel 1993 l’American Society of Apheresis (ASFA ha per la prima volta pubblicato un elenco di applicazioni cliniche delle diverse tecniche di aferesi terapeutica, fra le quali di gran lunga la più utilizzata era, allora come oggi, il PEx (2. Questo elenco comprendeva malattie autoimmuni, malattie ematologiche ed oncologiche, disordini metabolici, malattie neurologiche e malattie renali. Fra le malattie autoimmuni figuravano molte forme morbose di pertinenza reumatologica...

  16. Improvement of electrical properties of Cu/SiCOH low-k film integrated system by O2 plasma treatment

    Institute of Scientific and Technical Information of China (English)

    Qian Xiao-Mei; Wei Yong-Xia; Yu Xiao-Zhu; Ye Chao; Ning Zhao-Yuan; Liang Rong-Qing

    2007-01-01

    This paper investigates the effect of O2 plasma treatment on the electric property of Cu/SiCOH low dielectric constant (low-k) film integrated structure. The results show that the leakage current of Cu/SiCOH low-k integrated structure can be reduced obviously at the expense of a slight increase in dielectric constant k of SiCOH films. By the Fourier transform infrared (FTIR) analysis on the bonding configurations of SiCOH films treated by O2 plasma, it is found that the decrease of leakage current is related to the increase of Si-O cages originating from the linkage of Si dangling bonjs through O, which makes the open pores sealed and reduces the diffusion of Cu to pores.

  17. Plasma treatment of aluminium dross

    Energy Technology Data Exchange (ETDEWEB)

    Drouet, M.; Meunier, J.; Handfield, M. [Hydro-Quebec, Montreal, PQ (Canada)

    1992-12-31

    The treatment process that produces dross was described. Dross is a major by-product of all processes involving molten aluminium and is formed on the surface of the molten metal as it reacts with the furnace atmosphere. Up to 10% of the molten metal can be turned into dross. White dross is produced by melting primary aluminium. Black dross contains contaminants such as salt fluxes and other metals. The aluminium in the dross is usually recovered in oil or gas-fired rotary furnaces when fluxing salts are added to the load to increase the amount of aluminium recovered. This process produces a secondary dross called salt slag containing alumina, salts, impurities and a small amount of aluminium. One of the goals of plasma arc technologies has been to develop high temperature processes which would either avoid the use of salts in the treatment of white dross or provide a means of transforming the black dross into a landfill or salable product. 5 refs., 1 tab., 2 figs.

  18. Plasma treatment of polymers for modifying haemocompatibility

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, D.J

    2000-03-01

    The primary objective of this study was to investigate changes in the thrombogenicity of four materials, PTFE, PDMS, PEU and UHMW-PE induced by plasma treatments. In particular, correlations were sought between the chemical and topographical alterations to the materials surface caused by exposure to plasmas and the observed changes of blood response. Each material was treated in O{sub 2}, Ar, N{sub 2} and NH{sub 3} discharges, the system pressure, treatment times, gas flow rates and plasma power (< 1W) being the same in all cases. Evaluations were also carried out on plasma treated materials after being stored in PBS or air for periods of up to 1 month. The chemistry of surfaces was established using primarily XPS and SIMS, and topography by means of SEM and AFM, but auxiliary techniques such as FTIR, DSC and streaming potential determinations, where also used. It was also found that measurements of the wettability of the materials, using the Wilhelmy plate technique, provided a sensitive method for monitoring surface changes arising due to plasma treatment or storage. The chemical compositions of PTFE, PDMS and UHMW-PE surfaces were found to be closely similar to those of bulk material whereas PEU had a preponderance of soft segments at the solid-vacuum interface and an enhancement in concentration of nitrogen, indicative of the hard segments, towards the bulk. In addition, the topology of these materials was found to be influenced by the manufacturing process and is determined by conditions such as the operating temperature and cooling rate. Plasma treatment resulted in a significant increase in wettability and was attributed to major changes in surface chemistry combined with light etching. The principal chemical change observed was the removal of side groups which was concomitant with the incorporation of new functional groups and to a lesser extent, removal of surface contamination, chains scission and cross-linking. In addition, ageing of plasma treated

  19. Effect of preliminary vacuum plasma treatment on coating adhesion

    Science.gov (United States)

    Slabodchikov, Vladimir A.; Borisov, Dmitry P.; Kuznetsov, Vladimir M.

    2016-11-01

    The paper presents research results on the adhesion properties of Si coatings synthesized by different methods and under different conditions of preliminary vacuum ion plasma treatment of substrates with subsequent magnetron sputtering. The substrate surface was pretreated with low-energy ion beams, high-energy ion beams, gas discharge plasma, and plasma produced by a magnetron sputtering system. The vacuum conditions (pump type, pressure, etc.), the ion current density, and the bias parameters (pulse repetition frequency and duration) were varied. The research results demonstrate a considerable effect of plasma immersion ion implantation on the adhesion of Si coatings to NiTi substrates.

  20. Preliminary Study on Treatment of Palm Oil Mill Effluent (POME by Sand Filtration-DBD Plasma System

    Directory of Open Access Journals (Sweden)

    Ariadi Hazmi

    2016-02-01

    Full Text Available In the palm oil industry, open ponding, aerobic and anaerobic digestion, physicochemical treatment and membrane filtration are generally applied as conventional treatments of palm oil mill effluent (POME. In this study, a sand filtration-dielectric barrier discharge (DBD system was investigated as an alternative process for treating POME. This system can reduce land usage, processing time and costs compared to conventional systems. The removal efficiency of chemical oxygen demand (COD, biological oxygen demand (BOD5, and oil-grease in relation to the applied voltage were studied. Furthermore, the pH and temperature profiles were investigated. The obtained results indicate that the removal efficiency of COD, BOD5, and oil-grease increased with an increase of the applied voltage. The electrical energy consumption needed is about 10.56 kWh/L of POME.

  1. Water treatment by the AC gliding arc air plasma

    Science.gov (United States)

    Gharagozalian, Mehrnaz; Dorranian, Davoud; Ghoranneviss, Mahmood

    2017-06-01

    In this study, the effects of gliding arc (G Arc) plasma system on the treatment of water have been investigated experimentally. An AC power supply of 15 kV potential difference at 50 Hz frequency was employed to generate plasma. Plasma density and temperature were measured using spectroscopic method. The water was contaminated with staphylococcus aureus (Gram-positive) and salmonella bacteria (Gram-negative), and Penicillium (mold fungus) individually. pH, hydrogen peroxide, and nitride contents of treated water were measured after plasma treatment. Decontamination of treated water was determined using colony counting method. Results indicate that G Arc plasma is a powerful and green tool to decontaminate water without producing any byproducts.

  2. Treatment Options for Plasma Cell Neoplasms (Including Multiple Myeloma)

    Science.gov (United States)

    ... Cell Neoplasms Treatment Research Plasma Cell Neoplasms (Including Multiple Myeloma) Treatment (PDQ®)–Patient Version General Information About Plasma ... the throat can make it hard to swallow. Multiple myeloma In multiple myeloma , abnormal plasma cells ( myeloma cells ) ...

  3. Treatment Option Overview (Plasma Cell Neoplasms Including Multiple Myeloma)

    Science.gov (United States)

    ... Cell Neoplasms Treatment Research Plasma Cell Neoplasms (Including Multiple Myeloma) Treatment (PDQ®)–Patient Version General Information About Plasma ... the throat can make it hard to swallow. Multiple myeloma In multiple myeloma , abnormal plasma cells ( myeloma cells ) ...

  4. Plasma cell gingivitis: treatment with chlorpheniramine maleate.

    Science.gov (United States)

    Ranganathan, Aravindhan Thiruputkuzhi; Chandran, Chitraa R; Prabhakar, Priya; Lakshmiganthan, Mahalingam; Parthasaradhi, Thakkalapati

    2015-01-01

    Plasma cell gingivitis is a benign lesion of unknown etiology characterized by massive and diffuse infiltration of plasma cells into the gingival connective tissue. Clinically, it can be seen as a diffuse, erythematous, and edematous swelling involving the marginal gingiva and extending into the attached gingiva. Although usually painless, the lesion can be esthetically unappealing, especially when anterior gingiva is involved. Although the usual line of management is removal of the offending agent, this report describes the treatment of plasma cell gingivitis with the topical application of chlorpheniramine maleate (25 mg) for a period of 10 days.

  5. Theory and Simulations of Solar System Plasmas

    Science.gov (United States)

    Goldstein, Melvyn L.

    2011-01-01

    "Theory and simulations of solar system plasmas" aims to highlight results from microscopic to global scales, achieved by theoretical investigations and numerical simulations of the plasma dynamics in the solar system. The theoretical approach must allow evidencing the universality of the phenomena being considered, whatever the region is where their role is studied; at the Sun, in the solar corona, in the interplanetary space or in planetary magnetospheres. All possible theoretical issues concerning plasma dynamics are welcome, especially those using numerical models and simulations, since these tools are mandatory whenever analytical treatments fail, in particular when complex nonlinear phenomena are at work. Comparative studies for ongoing missions like Cassini, Cluster, Demeter, Stereo, Wind, SDO, Hinode, as well as those preparing future missions and proposals, like, e.g., MMS and Solar Orbiter, are especially encouraged.

  6. Stimulation of wound healing by helium atmospheric pressure plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Nastuta, Andrei Vasile; Topala, Ionut; Pohoata, Valentin; Popa, Gheorghe [Faculty of Physics, Alexandru Ioan Cuza University, Bd. Carol No. 11, 700506, Iasi (Romania); Grigoras, Constantin, E-mail: andrei.nastuta@uaic.ro [Physiopathology Department, Grigore T. Popa University of Medicine and Pharmacy, 700115, Iasi (Romania)

    2011-03-16

    New experiments using atmospheric pressure plasma have found large application in treatment of living cells or tissues, wound healing, cancerous cell apoptosis, blood coagulation on wounds, bone tissue modification, sterilization and decontamination. In this study an atmospheric pressure plasma jet generated using a cylindrical dielectric-barrier discharge was applied for treatment of burned wounds on Wistar rats' skin. The low temperature plasma jet works in helium and is driven by high voltage pulses. Oxygen and nitrogen based impurities are identified in the jet by emission spectroscopy. This paper analyses the natural epithelization of the rats' skin wounds and two methods of assisted epithelization, a classical one using polyurethane wound dressing and a new one using daily atmospheric pressure plasma treatment of wounds. Systemic and local medical data, such as haematological, biochemical and histological parameters, were monitored during entire period of study. Increased oxidative stress was observed for plasma treated wound. This result can be related to the presence in the plasma volume of active species, such as O and OH radicals. Both methods, wound dressing and plasma-assisted epithelization, provided positive medical results related to the recovery process of burned wounds. The dynamics of the skin regeneration process was modified: the epidermis re-epitelization was accelerated, while the recovery of superficial dermis was slowed down.

  7. Stimulation of wound healing by helium atmospheric pressure plasma treatment

    Science.gov (United States)

    Vasile Nastuta, Andrei; Topala, Ionut; Grigoras, Constantin; Pohoata, Valentin; Popa, Gheorghe

    2011-03-01

    New experiments using atmospheric pressure plasma have found large application in treatment of living cells or tissues, wound healing, cancerous cell apoptosis, blood coagulation on wounds, bone tissue modification, sterilization and decontamination. In this study an atmospheric pressure plasma jet generated using a cylindrical dielectric-barrier discharge was applied for treatment of burned wounds on Wistar rats' skin. The low temperature plasma jet works in helium and is driven by high voltage pulses. Oxygen and nitrogen based impurities are identified in the jet by emission spectroscopy. This paper analyses the natural epithelization of the rats' skin wounds and two methods of assisted epithelization, a classical one using polyurethane wound dressing and a new one using daily atmospheric pressure plasma treatment of wounds. Systemic and local medical data, such as haematological, biochemical and histological parameters, were monitored during entire period of study. Increased oxidative stress was observed for plasma treated wound. This result can be related to the presence in the plasma volume of active species, such as O and OH radicals. Both methods, wound dressing and plasma-assisted epithelization, provided positive medical results related to the recovery process of burned wounds. The dynamics of the skin regeneration process was modified: the epidermis re-epitelization was accelerated, while the recovery of superficial dermis was slowed down.

  8. Influence of Heat Treatment on the Bond Coat Cyclic Oxidation Behaviour in an Air-plasma-sprayed Thermal Barrier Coating System

    Institute of Scientific and Technical Information of China (English)

    W.R. Chen; X. Wu; B.R. Marple; P.C. Patnaik

    2004-01-01

    It is generally believed that a thermally grown oxide (TGO) layer of alumina provides enhanced protection to the metallic bond coat in thermal barrier coating (TBC) systems at elevated temperatures. However, in an air-plasma-sprayed (APS) TBC system with Co-32Ni-21Cr-8A1-0.5Y (wt%) bond coat, the TGO layer formed upon thermal exposure in air was predominantly chromia and spinels, which would not effectively protect the bond coat at above 1000℃. In addition,mixed oxides of chromia, spinel and nickel oxide formed heterogeneously between the ceramic coating and CoNiCrAlY bond coat, which would promote crack initiation and lead to premature TBC failure. A heat treatment in a low-pressure condition was applied to the as-sprayed TBC system, with the aim to produce an alumina layer as well as reduce the amount of detrimental oxides. The influence of this low-pressure oxidation treatment (LPOT) on the bond coat cyclic oxidation behaviour of the TBC system was also investigated.

  9. Influence of Heat Treatment on the Bond Coat Cyclic Oxidation Behaviour in an Air-plasma-sprayed Thermal Barrier Coating System

    Institute of Scientific and Technical Information of China (English)

    W.R.Chen; X.Wu; B.R.Marple; P.C.Patnaik

    2004-01-01

    It is generally believed that a thermally grown oxide (TGO) layer of alumina provides enhanced protection to the metallic bond coat in thermal barrier coating (TBC) systems at elevated temperatures. However, in an air-plasma-sprayed (APS) TBC system with Co-32Ni-21Cr-8A1-0.5Y (wt%) bond coat, the TGO layer formed upon thermal exposure in air was predominantly chromia and spinels, which would not effectively protect the bond coat at above 1000℃. In addition, mixed oxides of chromia, spinel and nickel oxide formed heterogeneously between the ceramic coating and CoNiCrA1Y bond coat, which would promote crack initiation and lead to premature TBC failure. A heat treatment in a low-pressure condition was applied to the as-sprayed TBC system, with the aim to produce an alumina layer as well as reduce the amount of detrimental oxides. The influence of this low-pressure oxidation treatment (LPOT) on the bond coat cyclic oxidation behaviour of the TBC system was also investigated.

  10. Laser treatment of plasma sprayed HA coatings

    NARCIS (Netherlands)

    Khor, KA; Vreeling, A; Dong, ZL; Cheang, P

    1999-01-01

    Laser treatment was conducted on plasma sprayed hydroxyapatite (HA) coatings using a Nd-YAG pulse laser. Various laser parameters were investigated. The results showed that the HA surface melted when an energy level of greater than or equal to 2 J and a spot size of 2 mm was employed during continuo

  11. Laser treatment of plasma sprayed HA coatings

    NARCIS (Netherlands)

    Khor, KA; Vreeling, A; Dong, ZL; Cheang, P

    1999-01-01

    Laser treatment was conducted on plasma sprayed hydroxyapatite (HA) coatings using a Nd-YAG pulse laser. Various laser parameters were investigated. The results showed that the HA surface melted when an energy level of greater than or equal to 2 J and a spot size of 2 mm was employed during continuo

  12. Investigation of the decolorization efficiency of two pin-to-plate corona discharge plasma system for industrial wastewater treatment

    Energy Technology Data Exchange (ETDEWEB)

    El-Tayeb, A., E-mail: ahmed.khalil@ejust.edu.eg; El-Shazly, A. H.; Elkady, M. F. [Egypt−Japan University of Science and Technology, Chemicals and Petrochemicals Engineering Department (Egypt); Abdel-Rahman, A. B. [Egypt−Japan University of Science and Technology, Electronics and Communications Engineering Department (Egypt)

    2016-09-15

    In this article, a dual pin-to-plate high-voltage corona discharge system is introduced to study experimentally the gap distance, the contact time, the effect of pin and plate materials, the thickness of ground plate and the conductivity on the amount of Acid Blue 25 dye color removal efficiency from polluted water. A study for the optimum air gap distance between dual pin and surface of Acid Blue 25 dye solution is carried out using 3D-EM simulator to find maximum electric field intensity at the tip of both pins. The outcomes display that the best gap for corona discharge is approximately 5 mm for 15-kV source. This separation is constant during the study of other factors. In addition, an investigation of the essential reactive species responsible for oxidation of the dye organic compounds (O{sub 3} in air discharge, O{sub 3} in water, and H{sub 2}O{sub 2}) during the experimental time is conducted. Three various materials such as: stainless steel, copper and aluminum are used for pins and plate. The maximum color removal efficiencies of Acid Blue 25 dyes are 99.03, 82.04, and 90.78% after treatment time 15 min for stainless steel, copper, and aluminum, respectively. Measurement results for the impact of thickness of an aluminum ground plate on color removal competence show color removal efficiencies of 86.3, 90.78, and 98.06% after treatment time 15 min for thicknesses of 2, 0.5, and 0.1 mm, respectively. The increasing of the solution conductivity leads to the reduction of decolorization efficiency. A kinetic model is used to define the performance of corona discharge system. The models of pseudo-zero-order, pseudo-first-order, and pseudo-second-order reaction kinetics are utilized to investigate the decolorization of Acid Blue 25 dye. The rate of degradation of Acid Blue 25 dye follows the pseudo-first-order kinetics in the dye concentration.

  13. Investigation of the decolorization efficiency of two pin-to-plate corona discharge plasma system for industrial wastewater treatment

    Science.gov (United States)

    El-Tayeb, A.; El-Shazly, A. H.; Elkady, M. F.; Abdel-Rahman, A. B.

    2016-09-01

    In this article, a dual pin-to-plate high-voltage corona discharge system is introduced to study experimentally the gap distance, the contact time, the effect of pin and plate materials, the thickness of ground plate and the conductivity on the amount of Acid Blue 25 dye color removal efficiency from polluted water. A study for the optimum air gap distance between dual pin and surface of Acid Blue 25 dye solution is carried out using 3D-EM simulator to find maximum electric field intensity at the tip of both pins. The outcomes display that the best gap for corona discharge is approximately 5 mm for 15-kV source. This separation is constant during the study of other factors. In addition, an investigation of the essential reactive species responsible for oxidation of the dye organic compounds (O3 in air discharge, O3 in water, and H2O2) during the experimental time is conducted. Three various materials such as: stainless steel, copper and aluminum are used for pins and plate. The maximum color removal efficiencies of Acid Blue 25 dyes are 99.03, 82.04, and 90.78% after treatment time 15 min for stainless steel, copper, and aluminum, respectively. Measurement results for the impact of thickness of an aluminum ground plate on color removal competence show color removal efficiencies of 86.3, 90.78, and 98.06% after treatment time 15 min for thicknesses of 2, 0.5, and 0.1 mm, respectively. The increasing of the solution conductivity leads to the reduction of decolorization efficiency. A kinetic model is used to define the performance of corona discharge system. The models of pseudo-zero-order, pseudo-first-order, and pseudo-second-order reaction kinetics are utilized to investigate the decolorization of Acid Blue 25 dye. The rate of degradation of Acid Blue 25 dye follows the pseudo-first-order kinetics in the dye concentration.

  14. Plasma Discharge Process in a Pulsed Diaphragm Discharge System

    Science.gov (United States)

    Duan, Jianjin; Hu, Jue; Zhang, Chao; Wen, Yuanbin; Meng, Yuedong; Zhang, Chengxu

    2014-12-01

    As one of the most important steps in wastewater treatment, limited study on plasma discharge process is a key challenge in the development of plasma applications. In this study, we focus on the plasma discharge process of a pulsed diaphragm discharge system. According to the analysis, the pulsed diaphragm discharge proceeds in seven stages: (1) Joule heating and heat exchange stage; (2) nucleated site formation; (3) plasma generation (initiation of the breakdown stage); (4) avalanche growth and plasma expansion; (5) plasma contraction; (6) termination of the plasma discharge; and (7) heat exchange stage. From this analysis, a critical voltage criterion for breakdown is obtained. We anticipate this finding will provide guidance for a better application of plasma discharges, especially diaphragm plasma discharges.

  15. Plasma exchanges for the treatment of severe systemic necrotizing vasculitides in clinical daily practice: Data from the French Vasculitis Study Group.

    Science.gov (United States)

    de Luna, Gonzalo; Chauveau, Dominique; Aniort, Julien; Carron, Pierre-Louis; Gobert, Pierre; Karras, Alexandre; Marchand-Adam, Sylvain; Maurier, François; Hatron, Pierre-Yves; Mania, Alexandre; le Guenno, Guillaume; Bally, Stéphane; Bienvenu, Boris; Cardineau, Eric; Goulenok, Tiphaine; Jourde-Chiche, Noémie; Samson, Maxime; Huart, Antoine; Pourrat, Jacques; Tiple, Aurélien; Aumaitre, Olivier; Puéchal, Xavier; Heshmati, Farhad; le Jeunne, Claire; Mouthon, Luc; Guillevin, Loïc; Terrier, Benjamin

    2015-12-01

    The use of plasma exchanges (PLEX) in systemic necrotizing vasculitides (SNV) still need to be codified. To describe indications, efficacy and safety of PLEX for the treatment of SNV, we conducted a multicenter retrospective study on patients with ANCA-associated vasculitis (AAV) or non-viral polyarteritis nodosa (PAN) treated with PLEX. One hundred and fifty-two patients were included: GPA (n = 87), MPA (n = 56), EGPA (n = 4) and PAN (n = 5). PLEX were used for rapidly progressive glomerulonephritis (RPGN) in 126 cases (86%), alveolar hemorrhage in 64 cases (42%), and severe mononeuritis multiplex in 23 cases (15%). In patients with RPGN, there was a significant improvement in renal function compared to baseline value (P studies are ongoing to define optimal indications, PLEX regimen and concomitant medications.

  16. Oxygen plasma treatments of jute fibers in improving the mechanical properties of jute/HDPE composites

    Energy Technology Data Exchange (ETDEWEB)

    Sever, K. [Department of Mechanical Engineering, Dokuz Eylul University, 35100, Izmir (Turkey); Erden, S. [Department of Mechanical Engineering, Ege University, 35100, Izmir (Turkey); Guelec, H.A. [Department of Food Engineering, Yuzuncu Yil University, 65250, Van (Turkey); Seki, Y., E-mail: yoldas.seki@deu.edu.tr [Department of Chemistry, Dokuz Eylul University, 35160, Buca, Izmir (Turkey); Sarikanat, M. [Department of Mechanical Engineering, Ege University, 35100, Izmir (Turkey)

    2011-09-15

    Highlights: {yields} To improve mechanical properties of jute/HDPE composites, jute fabric was subjected to oxygen plasma treatment. {yields} LF and RF plasma systems at different plasma powers were used for treatment. {yields} In LF system, interlaminar shear strength, tensile and flexure strengths showed a tendency to increase at plasma powers of 30 and 60 W. - Abstract: The surfaces of jute fabrics have been oxygen plasma treated using low frequency (LF) and radio frequency (RF) plasma systems at different plasma powers (30, 60, and 90 W) for 15 min to improve the mechanical properties of jute fiber/HDPE (high density polyethylene) composites. The effect of oxygen plasma treatment on the functional groups of jute fibers was examined by X-ray photoelectron spectroscopy (XPS) analysis. Effects of oxygen plasma treatments on the mechanical properties of jute fiber/HDPE composites were investigated by means of tensile, flexure, and short-beam shear tests. Surface morphology of the fractured surfaces of composites was observed by using scanning electron microscopy (SEM). When RF plasma system was used, the interlaminar shear strength (ILSS) values of the composites increased with increasing plasma power. Similarly, in LF plasma system, ILSS values showed a tendency to increase at plasma powers of 30 and 60 W. However, increasing of plasma power to 90 W decreased the ILSS value of jute/HDPE composite. Also, tensile and flexure strengths of the composites showed similar trends.

  17. Plasmas in conducting solutions for treatment of contaminated water

    Science.gov (United States)

    Kelsey, Colin; Graham, Bill; Mashal, Ahmad; Rooney, David; Gámez Sans, Robert

    2013-09-01

    A plasma produced in a conducting liquid is compared with more conventional advanced oxidation processes currently used in wastewater treatment such as the Fenton Process. The plasma was produced using a four electrode setup with driving circuitry producing 100 kHz bipolar square waves of approximately 300 V. We compare the effectiveness of the two processes by comparing the reduction in chemical oxygen demand achieved by each. Results indicate that for treatment times of 40 seconds our bench system can achieve a 50% COD reduction across a wide range of input COD concentrations, which is better than the reduction achieved by the single dose Fenton treatment process. Using electrical measurements the efficiency of the plasma process is determined to enable initial estimates of the feasibility of the process for industrial use. Chemical measurements on the plasma system are used to gain insight into the mechanisms underlying the process. These measurements include hydrogen peroxide production rate, which was determined to be 0.5 mg per minute, pH change, which increases with time, but tended to values of 1-3 pH units for characteristic treatment times, and temperature.

  18. Plasma Air Decontamination System (PADS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Plasma Air Decontamination System (PADS) is a trace contaminant control device based on non-thermal atmospheric pressure plasma technology that operates...

  19. Plasma Air Decontamination System (PADS) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed Plasma Air Decontamination System (PADS) is a trace contaminant control device based on non-thermal atmospheric-pressure plasma technology. Compared to...

  20. Enhancement of liquid treatment efficiency by microwave plasma under flow-induced reduced pressure

    Science.gov (United States)

    Ito, Michiko; Takahashi, Tomohiro; Takitou, Sho; Takashima, Seigo; Nomura, Norio; Kitagawa, Tominori; Toyoda, Hirotaka

    2017-02-01

    A new microwave plasma device system for in-line solution treatment is developed. In this system, the Venturi effect for pressure reduction is utilized for stable and effective plasma production. The decomposition of phenol solution is tested to verify the efficiency of an in-line plasma treatment system, and such a treatment system is confirmed to have a higher decomposition efficiency than our previously developed batch-type treatment system. Increases in phenol decomposition speed and decomposition energy efficiency with increasing solution flow rate are observed, which suggests the suppression of OH radical recombination and the utilization of OH radicals under flowing solution conditions.

  1. Microwave Plasma Hydrogen Recovery System

    Science.gov (United States)

    Atwater, James; Wheeler, Richard, Jr.; Dahl, Roger; Hadley, Neal

    2010-01-01

    A microwave plasma reactor was developed for the recovery of hydrogen contained within waste methane produced by Carbon Dioxide Reduction Assembly (CRA), which reclaims oxygen from CO2. Since half of the H2 reductant used by the CRA is lost as CH4, the ability to reclaim this valuable resource will simplify supply logistics for longterm manned missions. Microwave plasmas provide an extreme thermal environment within a very small and precisely controlled region of space, resulting in very high energy densities at low overall power, and thus can drive high-temperature reactions using equipment that is smaller, lighter, and less power-consuming than traditional fixed-bed and fluidized-bed catalytic reactors. The high energy density provides an economical means to conduct endothermic reactions that become thermodynamically favorable only at very high temperatures. Microwave plasma methods were developed for the effective recovery of H2 using two primary reaction schemes: (1) methane pyrolysis to H2 and solid-phase carbon, and (2) methane oligomerization to H2 and acetylene. While the carbon problem is substantially reduced using plasma methods, it is not completely eliminated. For this reason, advanced methods were developed to promote CH4 oligomerization, which recovers a maximum of 75 percent of the H2 content of methane in a single reactor pass, and virtually eliminates the carbon problem. These methods were embodied in a prototype H2 recovery system capable of sustained high-efficiency operation. NASA can incorporate the innovation into flight hardware systems for deployment in support of future long-duration exploration objectives such as a Space Station retrofit, Lunar outpost, Mars transit, or Mars base. The primary application will be for the recovery of hydrogen lost in the Sabatier process for CO2 reduction to produce water in Exploration Life Support systems. Secondarily, this process may also be used in conjunction with a Sabatier reactor employed to

  2. Plasma cell treatment device Plasma-on-Chip: Monitoring plasma-generated reactive species in microwells

    Science.gov (United States)

    Oh, Jun-Seok; Kojima, Shinya; Sasaki, Minoru; Hatta, Akimitsu; Kumagai, Shinya

    2017-01-01

    We have developed a plasma cell treatment device called Plasma-on-Chip that enables the real-time monitoring of a single cell culture during plasma treatment. The device consists of three parts: 1) microwells for cell culture, 2) a microplasma device for generating reactive oxygen and nitrogen species (RONS) for use in cell treatment, and 3) through-holes (microchannels) that connect each microwell with the microplasma region for RONS delivery. Here, we analysed the delivery of the RONS to the liquid culture medium stored in the microwells. We developed a simple experimental set-up using a microdevice and applied in situ ultraviolet absorption spectroscopy with high sensitivity for detecting RONS in liquid. The plasma-generated RONS were delivered into the liquid culture medium via the through-holes fabricated into the microdevice. The RONS concentrations were on the order of 10–100 μM depending on the size of the through-holes. In contrast, we found that the amount of dissolved oxygen was almost constant. To investigate the process of RONS generation, we numerically analysed the gas flow in the through-holes. We suggest that the circulating gas flow in the through-holes promotes the interaction between the plasma (ionised gas) and the liquid, resulting in enhanced RONS concentrations. PMID:28176800

  3. A novel cupping-assisted plasma treatment for skin disinfection

    Science.gov (United States)

    Xiong, Zilan; Graves, David B.

    2017-02-01

    A novel plasma treatment method/plasma source called cupping-assisted plasma treatment/source for skin disinfection is introduced. The idea combines ancient Chinese ‘cupping’ technology with plasma sources to generate active plasma inside an isolated, pressure-controlled chamber attached to the skin. Advantages of lower pressure include reducing the threshold voltage for plasma ignition and improving the spatial uniformity of the plasma treatment. In addition, with reduced pressure inside the cup, skin pore permeability might be increased and it improves attachment of the plasma device to the skin. Moreover, at a given pressure, plasma-generated active species are restricted inside the cup, raising local reactive species concentration and enhancing the measured surface disinfection rate. A surface micro-discharge (SMD) device is used as an example of a working plasma source. We report discharge characteristics and disinfection efficiency as a function of pressure and applied voltage.

  4. Effect of oxygen plasma treatment on anodic bonding

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Seung Woo; Choi, Woo Beom; Lee, Yun Hi; Ju, Byeong Kwon [Korea Institute of Science and Technology, Seoul (Korea, Republic of); Kim, Byong Ho [Korea Univ., Seoul (Korea, Republic of)

    2001-03-01

    Oxygen plasma surface treatment of silicon and glass was studied for improving the characteristics of anodic bonding. By using the sessile drop method, we confirmed that the surfaces activated by the oxygen plasma were rendered hydrophilic even at low r.f. power or short plasma exposure time. With increasing plasma power and exposure time the surface roughness was observed to increase. The oxygen plasma treatment was significantly efficient in reducing the impurities on the surface, which caused degradation in the bonding strength and the electrical property in interface. In the tensile test, the oxygen plasma treatment led to a higher bonding strength than the conventional anodic bonding method.

  5. Underwater plasma discharge and its water treatment applications

    Science.gov (United States)

    Ma, Sukhwal; Huh, Jin Young; Kim, Kangil; Hong, Yong Cheol; National Fusion Research Institute Team; Chonbuk National University Team; Kwangwoon University Team; NPAC Team

    2016-09-01

    In recent, the quality of water has been exacerbated by the influx of wastewater and water pollutants. There have been frequent occurrences of water blooms due to the eutrophication of river. Therefore, the needs for water treatment are increased through effective and environment-friendly method. In this work, we propose the plasma system to overcome the problems mentioned above using underwater discharge plasma. The underwater discharges are generated by capillary electrode, and have the advantages of low cost, high efficiency and eco-friendly processing. The proposed technologies can be suitable for eliminating cyanobacteria, decreasing the concentration of oil dissolved in water, and purifying wastewater. Cyanobacteria is killed directly by the underwater discharge and water-dissolved oil and heavy-metal wastewater are purified by coagulation effect, which may result from the chemical reactions of underwater plasma. Consequently, these technologies using underwater discharge can be alternative methods to replace the existing technologies.

  6. Novel application of plasma treatment for pharmaceutical and biomedical engineering.

    Science.gov (United States)

    Kuzuya, Masayuki; Sasai, Yasushi; Kondo, Shin-Ichi; Yamauchi, Yukinori

    2009-06-01

    The nature of plasma-induced surface radicals formed on a variety of organic polymers has been studied by electron spin resonance (ESR), making it possible to provide a sound basis for future experimental design of polymer surface processing using plasma treatment. On the basis of the findings from such studies, several novel bio-applications in the field of drug- and biomedical- engineering have been developed. Applications for drug engineering include the preparation of reservoir-type drug delivery system (DDS) of sustained- and delayed-release, and floating drug delivery system (FDDS) possessing gastric retention capabilities, followed by preparation of "Patient-Tailored DDS". Furthermore, the preparation of composite powders applicable to matrix-type DDS was developed by making a mechanical application to the surface radical-containing polymer powders with drug powders. In applications for biomedical engineering, the novel method to introduce the durable surface hydrophilicity and lubricity on hydrophobic biomedical polymers was developed by plasma-assisted immobilization of carboxyl group-containing polymer on the polymer substrate. The surfaces thus prepared were further used for the covalent immobilization of oligo-nucleotides (DNA) onto the polymer surfaces applicable to constructing DNA diagnosis system, and also plasma-assisted preparation of functionalized chemo-embolic agent of vinyl alcohol-sodium acrylate copolymer (PVA- PAANa).

  7. Impulsive Synchronization of Laser Plasma System

    Institute of Scientific and Technical Information of China (English)

    LI Yang; LIAO Xiao-Feng; LI Chuan-Dong; CHEN Guo

    2007-01-01

    The issue of impulsive synchronization of the coupled chaotic laser plasma system is investigated. A new framework for impulsive synchronization of such chaotic systems is presented, which makes the synchronization error system a linear impulsive control system. We derive some sufficient conditions for the synchronization of a laser plasma system via impulsive control with the varying impulsive intervals, which allows us to derive the impulsive synchronization law easily. To illustrate the effectiveness of the proposed results, two numerical examples are given.

  8. Enhancement of electrical properties of polyimide films by plasma treatment

    Science.gov (United States)

    Meddeb, A. Barhoumi; Ounaies, Z.; Lanagan, M.

    2016-04-01

    In this study, the effect of oxygen plasma treatment on the electrical and surface properties of polyimide, Kapton HN, film is investigated. The plasma treatment led to an increase in the oxygen presence on the polyimide surface and a marked surface hydrophilicity. The plasma treatment led to an increase in the dielectric breakdown and Weibull modulus as well as a remarkable reduction in the scatter of all electrical measurements. There is a significant reduction in the high field/high temperature leakage current after plasma treatment. These findings have important implications in the development and improvement of dielectric polymer capacitors.

  9. Oxygen Plasma Treatment of Rubber Surface by the Atmospheric Pressure Cold Plasma Torch

    DEFF Research Database (Denmark)

    Lee, Bong-ju; Kusano, Yukihiro; Kato, Nobuko

    1997-01-01

    A new application of the atmospheric cold plasma torch has been investigated. Namely, the surface treatment of an air-exposed vulcanized rubber compound. The effect of plasma treatment was evaluated by the bondability of the treated rubber compound with another rubber compound using a polyurethane...... adhesive. The adhesion property was improved by treatment of the rubber compound with plasma containing oxygen radicals. Physical and chemical changes of the rubber surface as a result of the plasma treatment were analyzed by field emission scanning electron microscopy (FE-SEM) and fourier transform...

  10. Enhanced conductivity of aluminum doped ZnO films by hydrogen plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H.P. [Department of Electrical Engineering and Graduate Institute of Optoelectronic Engineering, National Chung Hsing University, Taichung 402, Taiwan (China); Wang, F.H., E-mail: fansen@dragon.nchu.edu.t [Department of Electrical Engineering and Graduate Institute of Optoelectronic Engineering, National Chung Hsing University, Taichung 402, Taiwan (China); Wu, J.Y.; Kung, C.Y.; Liu, H.W. [Department of Electrical Engineering and Graduate Institute of Optoelectronic Engineering, National Chung Hsing University, Taichung 402, Taiwan (China)

    2010-10-01

    Aluminum doped zinc oxide (AZO) thin films prepared by radio-frequency (RF) magnetron sputtering at various RF power were treated by hydrogen plasma to enhance the characteristics for transparent electrode applications. The hydrogen plasma treatment was carried out at 300 {sup o}C in a plasma enhanced chemical vapor deposition system. X-ray diffraction analysis shows that all AZO films have a (002) preferred orientation and film crystallinity seems no significant change after plasma treatment. The plasma treatment not only significantly decreases film resistivity but enhances electrical stability as aging in air ambient. The improved electrical properties are due to desorption of weakly bonded oxygen species, formation of Zn-H type species and passivation of deep-level defects during plasma treatment.

  11. Retrospective analysis of plasma exchange combined with glucocorticosteroids for the treatment of systemic lupus erythematosus-related acute pancreatitis in central China.

    Science.gov (United States)

    Yu, Yi-Kai; Yu, Fei; Ye, Cong; Dai, Yu-Jie; Huang, Xiao-Wei; Hu, Shao-Xian

    2016-08-01

    Systemic lupus erythematosus-related acute pancreatitis (SLEAP) has a poor prognosis with a high mortality. We described the clinical features of SLEAP, and discussed the feasibility of plasma exchange (PE) combined with glucocorticosteroids (GC) in short-term prognosis and possible mechanism in reducing serum inflammatory cytokine IL-6 and removing serum lipids. A retrospective study was performed by an independent rheumatologist. Medical records of SLEAP from March 2010 to December 2014 were retrieved from Tongji Hospital information system, and patients were divided into two groups according to whether PE therapy was adopted. Sixteen patients treated with PE in combination with GC were classified as group A, and the other 10 patients who were treated with merely GC were classified as group B. Patients' clinical remission rate and average daily GC dosage after two-week therapy were compared between the two groups. Patients' serum inflammatory cytokines and lipid concentration were compared between baseline and after two-week treatment in both groups. Pearson correlation test was performed to determine association between serum cytokines and Ranson score. SLEDAI score in group A patients at baseline (14.8±3.1) showed no statistical difference from that in group B (14.1±3.3). At baseline serum IL-6 levels had no significant difference between group A [13.14 (11.12, 16.57) mg/L] and group B [14.63 (11.37, 16.37) mg/L]; after two-week therapy IL-6 decreased significantly in group A [9.16 (7.93, 10.75)mg/L] while it did not show decreasing trend in group B [13.62 (9.29,17.63) mg/L]. Serum lipid concentration after two-week therapy in group A [(TC=5.02±0.53, TG=1.46±0.44) mmol/L] decreased significantly compared to baseline [(TC=6.11±0.50, TG=2.14±1.03) mmol/L], while similar tendency was not observed in group B. The remission rate after two-week therapy was higher in group A (70.0%) than in group B (25.0%). Acute pancreatitis (AP) was one of the clinical

  12. Fundamentals of gas phase plasmas for treatment of human tissue.

    Science.gov (United States)

    Kushner, Mark J; Babaeva, Natalia Yu

    2011-01-01

    The use of gas phase plasmas for treating human tissue is at the intersection of two disciplines - plasma physics and engineering, and medicine. In this paper, a primer will be provided for the medical practitioner on the fundamentals of generating gas phase plasmas at atmospheric pressure in air for the treatment of human tissue. The mechanisms for gas phase plasmas interacting with tissue and biological fluids will also be discussed using results from computer modeling.

  13. Plasma exchange in progressive systemic sclerosis

    Directory of Open Access Journals (Sweden)

    Mohammad Bagher Owlia

    2015-10-01

    Full Text Available Systemic sclerosis (SSc is an autoimmune systemic disease of unknown etiology. Present treatment modalities have limited impact on clinical/ laboratory outcomes. For the first time in our center, we used plasma exchange (PEx in a rather young woman with recent onset but progressive SSc. She is a 39-year-old woman with a recent history of skin stiffness, Raynaud’s phenomenon, nail fold capillary changes and newly diagnosis of SSc presented to us due to worsening her clinical symptoms even after initiation of routine remedies such as low dose oral prednisolone, Ca-channel blockers, azathioprine and pentoxyfylline. After obtaining written consent, interdisciplinary discussion with experts in this field and agreement we started a series of plasma exchange with FFP replacement for her. A dramatic clinical response was observed in respect to Raynaud’s phenomenon, skin stiffness, tendon rub after three sessions of PEx. Her modified Rodnan skin score (MRSS dropped from 36 (before commencement of therapy to 28 in day 4 and 18 in day 20 after 15 sessions of PEx. In conclusion PEx could significantly modify the course of SSc as observed in our case study. Elimination of culprit immune mediators/cytokines/autoantibodies could be the possible mechanism of action of PEx. 

  14. Characteristics of ITO films with oxygen plasma treatment for thin film solar cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Seob [Department of Photoelectronics Information, Chosun College of Science and Technology, Gwangju (Korea, Republic of); Kim, Eungkwon [Digital Broadcasting Examination, Korean Intellectual Property Office, Daejeon, Suwon 440-746 (Korea, Republic of); Hong, Byungyou [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong, 300, Jangan-gu, Suwon 440-746 (Korea, Republic of); Lee, Jaehyoeng, E-mail: jaehyeong@skku.edu [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong, 300, Jangan-gu, Suwon 440-746 (Korea, Republic of)

    2013-12-15

    Graphical abstract: The effect of O{sub 2} plasma treatment on the surface and the work function of ITO films. - Highlights: • ITO films were prepared on the glass substrate by RF magnetron sputtering method. • Effects of O{sub 2} plasma treatment on the properties of ITO films were investigated. • The work function of ITO film was changed from 4.67 to 5.66 eV by plasma treatment. - Abstract: The influence of oxygen plasma treatment on the electro-optical and structural properties of indium-tin-oxide films deposited by radio frequency magnetron sputtering method were investigated. The films were exposed at different O{sub 2} plasma powers and for various durations by using the plasma enhanced chemical vapor deposition (PECVD) system. The resistivity of the ITO films was almost constant, regardless of the plasma treatment conditions. Although the optical transmittance of ITO films was little changed by the plasma power, the prolonged treatment slightly increased the transmittance. The work function of ITO film was changed from 4.67 eV to 5.66 eV at the plasma treatment conditions of 300 W and 60 min.

  15. Plasma discharge self-cleaning filtration system

    Science.gov (United States)

    Cho, Young I.; Fridman, Alexander; Gutsol, Alexander F.; Yang, Yong

    2014-07-22

    The present invention is directed to a novel method for cleaning a filter surface using a plasma discharge self-cleaning filtration system. The method involves utilizing plasma discharges to induce short electric pulses of nanoseconds duration at high voltages. These electrical pulses generate strong Shockwaves that disintegrate and dislodge particulate matter located on the surface of the filter.

  16. Distributed Treatment Systems.

    Science.gov (United States)

    Zgonc, David; Baideme, Matthew

    2015-10-01

    This section presents a review of the literature published in 2014 on topics relating to distributed treatment systems. This review is divided into the following sections with multiple subsections under each: constituent removal; treatment technologies; and planning and treatment system management.

  17. Plasma spraying system with distributed controlling

    Institute of Scientific and Technical Information of China (English)

    李春旭; 陈克选; 张成

    2003-01-01

    A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.

  18. Nonvolatile memory effect of tungsten nanocrystals under oxygen plasma treatments

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Shih-Cheng, E-mail: scchen0213@gmail.co [Department of Electrical Engineering and Institute of Electronic Engineering, National Tsing Hua University, Taiwan (China); Chang, Ting-Chang [Department of Physics and Institute of Electro-Optical Engineering, and Center for Nanoscience and Nanotechnology, National Sun Yat-Sen University, Taiwan (China); Chen, Wei-Ren [Institute of Electronics, National Chiao Tung University, Taiwan, Hsinchu, Taiwan 300 (China); Lo, Yuan-Chun; Wu, Kai-Ting [Institute of Photonics Technologies, National Tsing Hua University, Taiwan (China); Sze, S.M. [Institute of Electronics, National Chiao Tung University, Taiwan, Hsinchu, Taiwan 300 (China); Chen, Jason; Liao, I.H. [ProMOS Technologies, No. 19 Li Hsin Rd., Science-Based Industrial Park, Hsinchu, Taiwan 300 (China); Yeh, Fon-Shan [Department of Electrical Engineering and Institute of Electronic Engineering, National Tsing Hua University, Taiwan (China)

    2010-10-01

    In this work, an oxygen plasma treatment was used to improve the memory effect of nonvolatile W nanocrystal memory, including memory window, retention and endurance. To investigate the role of the oxygen plasma treatment in charge storage characteristics, the X-ray photon-emission spectra (XPS) were performed to analyze the variation of chemical composition for W nanocrystal embedded oxide both with and without the oxygen plasma treatment. In addition, the transmission electron microscopy (TEM) analyses were also used to identify the microstructure in the thin film and the size and density of W nanocrystals. The device with the oxygen plasma treatment shows a significant improvement of charge storage effect, because the oxygen plasma treatment enhanced the quality of silicon oxide surrounding the W nanocrystals. Therefore, the data retention and endurance characteristics were also improved by the passivation.

  19. CO2 reduction using adsorption followed by nonthermal plasma treatment

    Science.gov (United States)

    Nakajima, Kenji; Takahashi, Kazuya; Tanaka, Masanari; Kuroki, Tomoyuki; Okubo, Masaaki

    2015-10-01

    Carbon dioxide (CO2) is one of the main substances linked to global warming, and its emission should be reduced. In this study, a CO2 reduction treatment using an adsorbent and a nonthermal plasma flow is investigated. This treatment comprises a physical adsorption process and nitrogen (N2) plasma reduction process. In the physical adsorption process, CO2 is adsorbed by the adsorbent. In the N2 plasma reduction process, the adsorbed CO2 is reduced to CO by a nonthermal plasma flow that is generated by a plasma reactor with a circulating N2 plasma flow. The generated CO can be reused as a fuel. We estimate this experimental results by calculating conversion efficiency of CO2 to CO. In the N2 plasma reduction process, the CO concentration reaches approximately 1%, regardless of the number of experiments, and conversion efficiency reaches at most 5.3%.

  20. A plasma process monitor/control system

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J.O.; Ward, P.P.; Smith, M.L. [Sandia National Labs., Albuquerque, NM (United States); Markle, R.J. [Advanced Micro Devices, Inc., Austin, TX (United States)

    1997-08-01

    Sandia National Laboratories has developed a system to monitor plasma processes for control of industrial applications. The system is designed to act as a fully automated, sand-alone process monitor during printed wiring board and semiconductor production runs. The monitor routinely performs data collection, analysis, process identification, and error detection/correction without the need for human intervention. The monitor can also be used in research mode to allow process engineers to gather additional information about plasma processes. The plasma monitor can perform real-time control of support systems known to influence plasma behavior. The monitor can also signal personnel to modify plasma parameters when the system is operating outside of desired specifications and requires human assistance. A notification protocol can be selected for conditions detected in the plasma process. The Plasma Process Monitor/Control System consists of a computer running software developed by Sandia National Laboratories, a commercially available spectrophotometer equipped with a charge-coupled device camera, an input/output device, and a fiber optic cable.

  1. Cold Atmospheric Plasma Manipulation of Proteins in Food Systems

    DEFF Research Database (Denmark)

    Tolouie, Haniye; Hashemi, Maryam; Mohammadifar, Mohammad Amin

    2017-01-01

    Plasma processing has been getting a lot of attention in recent applications as a novel, eco-friendly, and highly efficient approach. Cold plasma has mostly been used to reduce microbial counts in foodstuff and biological materials, as well as in different levels of packaging, particularly in cases...... where there is thermal sensitivity. As it is a very recent application, the impact of cold plasma treatment has been studied on the protein structures of food and pharmaceutical systems, as well as in the packaging industry. Proteins, as a food constituent, play a remarkable role in the techno...... of plasma on the conformation and function of proteins with food origin, especially enzymes and allergens, as well as protein-made packaging films. In enzyme manipulation with plasma, deactivation has been reported to be either partial or complete. In addition, an activity increase has been observed in some...

  2. Activation of the complement system and accumulation of hemoglobin-haptoglobin complexes in plasma during an adverse reaction to penicillin treatment.

    Science.gov (United States)

    Brandslund, I; Svehag, S E; Teisner, B; Hyltoft Petersen, P

    1983-01-01

    A patient treated with penicillin intravenously developed a serum sickness-like reaction. Classical pathway complement (C) activation was indicated by quantitation of the split products C3c and C3d as well as demonstration of C4 conversion. Circulating immune complexes could, however, not be detected by the solid-phase Clq and PEG-precipitation methods. A concomitant accumulation of circulating hemoglobin-haptoglobin complexes and a marked fall in serum-fibronectin concentrations suggested saturation of the reticuloendothelial system. The plasma became a deep-red color, and a diffuse intravascular coagulation followed. The patient recovered completely upon discontinuation of penicillin administration.

  3. Cell Adhesion on Polycaprolactone Modified by Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Nina Recek

    2016-01-01

    Full Text Available We have investigated the influence of various plasma treatments of electrospun polycaprolactone (PCL scaffolds on the adhesion and proliferation of human umbilical endothelial cells (HUVEC. The PCL scaffolds were treated in plasmas created in O2, NH3 or SO2 gas at identical conditions. Surface functionalization of plasma-treated samples was determined using X-ray photoelectron spectroscopy. Cell adhesion and morphology were investigated by scanning electron microscopy and the influence of plasma treatment on cell adhesion and viability was evaluated with cell viability assay (MTT assay. The results showed the highest metabolic activity of HUVEC on PCL samples treated with O2 and NH3 plasma. Accordingly, the cells reflected the best adhesion and morphology on O2 and NH3 plasma-treated PCL samples already at 3 h. Moreover, treatment with O2 and NH3 plasma even stimulated endothelial cell proliferation on PCL surfaces by 60% as measured at 24 h, showing significant improvement in endothelialization of this material. Contrarily, SO2 plasma appeared to be less promising in comparison with O2 and NH3 plasma; however, it was still better than without any plasma treatment. Thus, our results importantly contribute to the biocompatibility improvement of the PCL polymer, commonly used for scaffolds in tissue engineering.

  4. Surgical treatment of unicentric plasma cell histological type Castleman's disease

    Directory of Open Access Journals (Sweden)

    Marić Nebojša

    2011-01-01

    Full Text Available Introduction. Castleman’s disease or angiofollicular lymph hyperplasia is a rare disease with two identified clinical forms. Unicentric or localized form is characterized by isolated growth of lymph nodes, most often in mediastinum, and multicentric form is expressed as systemic disease with spread lymphadenopathy, organomegaly and presence of general symptoms of the disease. Histological types are hyalovascular, plasma-cell and transitive (mixed cell. Case report. This case report shows a woman, 59 years old, with unicentric form of plasma-cell type of Castleman’s disease. Unicentric form is usually shown as hyalovascular histological type, extremely rare as plasma-cell type, and transitive (mixed cell type was never described in literature as localized clinical form. The disease was manifested with chest pain, loss of body weight, exhaustion and weakness of legs. Further diagnostic procedures found the presence of enlarged lymph nodes paratracheally right, in a close contact with vena cava superior. The disease was confirmed by histopathological analysis of bioptated mediastinal lymph node after mediastinoscopy. Surgical treatment included extirpation of enlarged lymph nodes. After the regular postoperative condition, a full therapy effect was confirmed. Conclusion. Unicentric form of Castleman’s disease is expressed with enlarged lymph nodes on predilected places, usually in mediastinum. Surgical treatment is best method for the management of the disease and brings a full recovery of patient.

  5. Plasma treatments of wool fiber surface for microfluidic applications

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, So-Hyoun; Hwang, Ki-Hwan; Lee, Jin Su [Department of Chemistry, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Boo, Jin-Hyo, E-mail: jhboo@skku.edu [Department of Chemistry, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Yun, Sang H., E-mail: shy@kth.se [Institute of Basic Science, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of)

    2015-09-15

    Highlights: • We used atmospheric plasma for tuning the wettability of wool fibers. • The wicking rates of the wool fibers increased with increasing treatment time. • The increasing of wettability results in removement of fatty acid on the wool surface. - Abstract: Recent progress in health diagnostics has led to the development of simple and inexpensive systems. Thread-based microfluidic devices allow for portable and inexpensive field-based technologies enabling medical diagnostics, environmental monitoring, and food safety analysis. However, controlling the flow rate of wool thread, which is a very important part of thread-based microfluidic devices, is quite difficult. For this reason, we focused on thread-based microfluidics in the study. We developed a method of changing the wettability of hydrophobic thread, including wool thread. Thus, using natural wool thread as a channel, we demonstrate herein that the manipulation of the liquid flow, such as micro selecting and micro mixing, can be achieved by applying plasma treatment to wool thread. In addition to enabling the flow control of the treated wool channels consisting of all natural substances, this procedure will also be beneficial for biological sensing devices. We found that wools treated with various gases have different flow rates. We used an atmospheric plasma with O{sub 2}, N{sub 2} and Ar gases.

  6. Clinical applications of plasma based electrosurgical systems

    Science.gov (United States)

    Woloszko, Jean; Endler, Ashley; Ryan, Thomas P.; Stalder, Kenneth R.

    2013-02-01

    Over the past 18 years, several electrosurgical systems generating a low temperature plasma in an aqueous conductive solution have been commercialized for various clinical applications and have been used in over 10 million patients to date. The most popular utilizations are in arthroscopic surgery, otorhinolaryngology surgery, spine and neurosurgery, urology and wound care. These devices can be configured to bring saline to the tip and to have concomitant aspiration to remove by-products and excess fluid. By tuning the electrode geometry, waveform and fluid dynamic at the tip of the devices, tissue resection and thermal effects can be adjusted individually. This allows one to design products that can operate as precise tissue dissectors for treatment of articular cartilage or debridement of chronic wounds, as well as global tissue debulking devices providing sufficient concomitant hemostasis for applications like tonsillectomies. Effects of these plasma based electrosurgical devices on cellular biology, healing response and nociceptive receptors has also been studied in various models. This talk will include a review of the clinical applications, with product descriptions, results and introductory review of some of the research on the biological effects of these devices.

  7. Plasma drug activity assay for treatment optimization in tuberculosis patients.

    Science.gov (United States)

    Heysell, Scott K; Mtabho, Charles; Mpagama, Stellah; Mwaigwisya, Solomon; Pholwat, Suporn; Ndusilo, Norah; Gratz, Jean; Aarnoutse, Rob E; Kibiki, Gibson S; Houpt, Eric R

    2011-12-01

    Low antituberculosis (TB) drug levels are common, but their clinical significance remains unclear, and methods of measurement are resource intensive. Subjects initiating treatment for sputum smear-positive pulmonary TB were enrolled from Kibong'oto National TB Hospital, Tanzania, and levels of isoniazid, rifampin, ethambutol, and pyrazinamide were measured at the time of typical peak plasma concentration (C(2 h)). To evaluate the significance of the effect of observed drug levels on Mycobacterium tuberculosis growth, a plasma TB drug activity (TDA) assay was developed using the Bactec MGIT system. Time to detection of plasma-cocultured M. tuberculosis versus time to detection of control growth was defined as a TDA ratio. TDA assays were later performed using the subject's own M. tuberculosis isolate and C(2 h) plasma from the Tanzanian cohort and compared to drug levels and clinical outcomes. Sixteen subjects with a mean age of 37.8 years ± 10.7 were enrolled. Fourteen (88%) had C(2 h) rifampin levels and 11 (69%) had isoniazid levels below 90% of the lower limit of the expected range. Plasma spiked with various concentrations of antituberculosis medications found TDA assay results to be unaffected by ethambutol or pyrazinamide. Yet with a range of isoniazid and rifampin concentrations, TDA exhibited a statistically significant correlation with drug level and drug MIC, and a TDA of ~1.0 indicated the presence of multidrug-resistant TB. In Tanzania, low (≤ 2.0) TDA was significantly associated with both lower isoniazid and rifampin C(2 h) levels, and very low (≤ 1.5) TDA corresponded to a trend toward lack of cure. Study of TDA compared to additional clinical outcomes and as a therapeutic management tool is warranted.

  8. Plasma and Ocular Prednisolone Disposition after Oral Treatment in Cats

    Directory of Open Access Journals (Sweden)

    María J. Del Sole

    2013-01-01

    Full Text Available Objective. To evaluate the plasma and aqueous humor disposition of prednisolone after oral administration in cats. Methods. Six cats were administered with a single oral dose of prednisolone (10 mg. Blood and aqueous humor samples were serially collected after drug administration. Prednisolone concentrations in plasma and aqueous humor were measured at 0.25, 0.5, 1.0, 1.5, 2.0, 3.0, 4.0, and 5.0 h after administration by a high-performance liquid chromatographic analytical method developed and validated for this purpose. Results. Mean ± standard error (SE of maximum plasma prednisolone concentration (300.8 ± 67.3 ng/mL was reached at 1 h after administration. Prednisolone was distributed to the aqueous humor reaching a mean peak concentration of 100.9 ± 25.5 ng/mL at 1.25 h after administration. The mean ± SE systemic and aqueous humor exposure (AUC was 553.3 ± 120.0 ng*h/mL and 378.8 ± 64.9 ng*h/mL, respectively. A high AUCaqueous humor/AUCplasma ratio was observed (0.68 ± 0.13. The mean half-life time of elimination in plasma and aqueous humor was 0.87 ± 0.16 h and 2.25 ± 0.44 h, respectively. Clinical Significance. The observed high ratio between aqueous humor and plasma prednisolone concentrations indicates that extensive penetration of prednisolone to the anterior segment of the eye may occur. This is the first step that contributes to the optimization of the pharmacological therapeutics for the clinical treatment of uveitis.

  9. Recent development of plasma optical systems (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Goncharov, A. A., E-mail: gonchar@iop.kiev.ua [Institute of Physics, National Academy of Science, Kiev 03028 (Ukraine)

    2016-02-15

    The article devotes a brief description of the recent development and current status of an ongoing research of plasma optical systems based on the fundamental plasma optical idea magnetic electron isolation, equipotentialization magnetic field lines, and the axi-symmetric cylindrical electrostatic plasma lens (PL) configuration. The experimental, theoretical, and simulation investigations have been carried out over recent years collaboratively between IP NASU (Kiev), LBNL (Berkeley, USA), and HCEI RAS (Tomsk). The crossed electric and magnetic fields inherent the PL configuration that provides the attractive method for establishing a stable plasma discharge at low pressure. Using PL configuration, several high reliability plasma devices were developed. These devices are attractive for many high-tech applications.

  10. Exogenous nitric oxide (NO) generated by NO-plasma treatment modulates osteoprogenitor cells early differentiation

    Science.gov (United States)

    Elsaadany, Mostafa; Subramanian, Gayathri; Ayan, Halim; Yildirim-Ayan, Eda

    2015-09-01

    In this study, we investigated whether nitric oxide (NO) generated using a non-thermal plasma system can mediate osteoblastic differentiation of osteoprogenitor cells without creating toxicity. Our objective was to create an NO delivery mechanism using NO-dielectric barrier discharge (DBD) plasma that can generate and transport NO with controlled concentration to the area of interest to regulate osteoprogenitor cell activity. We built a non-thermal atmospheric pressure DBD plasma nozzle system based on our previously published design and similar designs in the literature. The electrical and spectral analyses demonstrated that N2 dissociated into NO under typical DBD voltage-current characteristics. We treated osteoprogenitor cells (MC3T3-E1) using NO-plasma treatment system. Our results demonstrated that we could control NO concentration within cell culture media and could introduce NO into the intracellular space using NO-plasma treatment with various treatment times. We confirmed that NO-plasma treatment maintained cell viability and did not create any toxicity even with prolonged treatment durations. Finally, we demonstrated that NO-plasma treatment induced early osteogenic differentiation in the absence of pro-osteogenic growth factors/proteins. These findings suggest that through the NO-plasma treatment system we are able to generate and transport tissue-specific amounts of NO to an area of interest to mediate osteoprogenitor cell activity without subsequent toxicity. This opens up the possibility to develop DBD plasma-assisted tissue-specific NO delivery strategies for therapeutic intervention in the prevention and treatment of bone diseases.

  11. The Solubility of Natural Cellulose After DBD Plasma Treatment

    Institute of Scientific and Technical Information of China (English)

    WU Jun; ZENG Fengcai; CHEN Bingqiang

    2008-01-01

    Natural cellulose was treated by an atmospheric DBD plasma. The solubility of cel-lulose in a diluted alkaline solution after the plasma treatment was investigated. The properties were characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spec-troscopy (FTIR) and scanning electron microscopy (SEM). The results indicated that the surface of cellulose treated by the argon DBD plasma was significantly etched, and the relevant force of hy-drogen bonding was decreased. This might be the essential reason for the solubility improvement of natural cellulose in the diluted alkaline solution. Through a comparison of two discharge modes, the atmospheric DBD plasma gun and the parallel plate capacitively coupled DBD plasma, it wasfound that the atmospheric DBD plasma gun was more effective in fragmentizing the cellulose due to its production of a high energy plasma based on its special structure [6] .

  12. Polymerization by plasma: surface treatment and plasma simulation; Polimerizacion por plasma: tratamiento superficial y simulacion del plasma

    Energy Technology Data Exchange (ETDEWEB)

    Morales C, J

    2001-07-01

    One of the general objectives that are developed by the group of polymers semiconductors in the laboratory of polymers of the UAM-Iztapalapa is to study the surface treatment for plasma of different materials. Framed in this general objective, in this work three lines of investigation have been developed, independent one of other that converge in the general objective. The first one tries about the modeling one and evaluation of the microscopic parameters of operation of the polymerization reactor. The second are continuation of the study of conductive polymers synthesized by plasma and the third are an application of the treatment for plasma on natural fibers. In the first one it lines it is carried out the characterization and simulation of the parameters of operation of the polymerization reactor for plasma. They are determined the microscopic parameters of operation of the reactor experimentally like they are the electronic temperature, the potential of the plasma and the density average of electrons using for it an electrostatic Langmuir probe. In the simulation, starting from the Boltzmann transport equation it thinks about the flowing pattern and the electronic temperature, the ions density is obtained and of electrons. The data are compared obtained experimentally with the results of the simulation. In second line a study is presented about the influence of the temperature on the electric conductivity of thin films doped with iodine, of poly aniline (P An/I) and poly pyrrole (P Py/I). The films underwent heating-cooling cycles. The conductivity of P An/I and P Py/I in function of the temperature it is discussed based on the Arrhenius model, showing that it dominates the model of homogeneous conductivity. It is also synthesized a polymer bi-layer of these two elements and a copolymer random poly aniline-poly pyrrole, of the first one it the behavior of its conductivity discusses with the temperature and of the second, the conductivity is discussed in

  13. Evaluation of the sensitivity of bacterial and yeast cells to cold atmospheric plasma jet treatments.

    Science.gov (United States)

    Sharkey, Michael A; Chebbi, Ahmed; McDonnell, Kevin A; Staunton, Claire; Dowling, Denis P

    2015-06-07

    The focus of this research was first to determine the influence of the atmospheric plasma drive frequency on the generation of atomic oxygen species and its correlation with the reduction of bacterial load after treatment in vitro. The treatments were carried out using a helium-plasma jet source called PlasmaStream™. The susceptibility of multiple microbial cell lines was investigated in order to compare the response of gram-positive and gram-negative bacteria, as well as a yeast cell line to the atmospheric plasma treatment. It was observed for the source evaluated that at a frequency of 160 kHz, increased levels of oxygen-laden active species (i.e., OH, NO) were generated. At this frequency, the maximum level of bacterial inactivation in vitro was also achieved. Ex vivo studies (using freshly excised porcine skin as a human analog) were also carried out to verify the antibacterial effect of the plasma jet treatment at this optimal operational frequency and to investigate the effect of treatment duration on the reduction of bacterial load. The plasma jet treatment was found to yield a 4 log reduction in bacterial load after 6 min of treatment, with no observable adverse effects on the treatment surface. The gram-negative bacterial cell lines were found to be far more susceptible to the atmospheric plasma treatments than the gram-positive bacteria. Flow cytometric analysis of plasma treated bacterial cells (Escherichia coli) was conducted in order to attain a fundamental understanding of the mode of action of the treatment on bacteria at a cellular level. This study showed that after treatment with the plasma jet, E. coli cells progressed through the following steps of cell death; the inactivation of transport systems, followed by depolarization of the cytoplasmic membrane, and finally permeabilization of the cell wall.

  14. Unfiltered Diesel Engine Exhaust Treatment by Discharge Plasma:Effect of Soot Oxidation

    Institute of Scientific and Technical Information of China (English)

    B. S. Rajanikanth; Subhankar Das; A. D. Srinivasan

    2004-01-01

    A cascaded system of electrical discharges (Non-thermal plasma), catalyst and adsorption process was investigated for the removal of oxides of nitrogen (NO x) and carbon monoxide (CO) from a Diesel engine raw exhaust. The three processes were separately studied first, and then the cascaded processes, namely plasma-catalyst and plasma-adsorbent, were investigated. In this paper main emphasis was laid on the effect of carbonaceous soot oxidation on the plasma treatment process. While the cascaded plasma-catalyst process exhibits a higher CO removal, the cascaded plasma-adsorbent process exhibits a higher NO x removal. The experiments were conducted under no-load. The plasma and adsorbent reactors were kept at room temperature throughout the experiment while the catalyst reactor was kept at 200oC / 300oC.

  15. Oxygen plasma-treatment effects on Si transfer.

    Science.gov (United States)

    Langowski, Bryan A; Uhrich, Kathryn E

    2005-07-05

    Oxygen plasma-treatment is commonly used to increase the hydrophilicity of poly(dimethylsiloxane) (PDMS) stamps used for microcontact printing (muCP) aqueous-based inks. Review of the literature reveals that a wide range of plasma parameters are currently employed to modify stamp surfaces. However, little is known about the effect of these parameters (e.g., power, chamber pressure, duration) on the undesirable transfer of low-molecular-weight silicon-containing fragments from the stamps that commonly occurs during muCP. To study the effect of oxygen plasma-treatment on Si transfer, unpatterned PDMS stamps were treated with oxygen plasma under various conditions and used to stamp deionized water on plasma-activated poly(methyl methacrylate) (PMMA) substrates. Once stamped, the PMMA substrates were analyzed with X-ray photoelectron spectroscopy (XPS) to quantify and characterize silicon present on the substrate surface. In addition, used PDMS stamps were analyzed with scanning electron microscopy (SEM) to observe topographical changes that occur during oxygen plasma-treatment. XPS results show that all plasma treatments studied significantly reduced the amount of Si transfer from the treated stamps during muCP as compared to untreated PDMS stamps and that the source of transfer is residual PDMS fragments not removed by oxygen plasma. SEM results show that, although the treated stamps undergo a variety of topographical changes, no correlation exists between stamp topography and extent of Si transfer from the stamps.

  16. Adaptive Embedded Digital System for Plasma Diagnostics

    Science.gov (United States)

    González, Angel; Rodríguez, Othoniel; Mangual, Osvaldo; Ponce, Eduardo; Vélez, Xavier

    2014-05-01

    An Adaptive Embedded Digital System to perform plasma diagnostics using electrostatic probes was developed at the Plasma Engineering Laboratory at Polytechnic University of Puerto Rico. The system will replace the existing instrumentation at the Laboratory, using reconfigurable hardware to minimize the equipment and software needed to perform diagnostics. The adaptability of the design resides on the possibility of replacing the computational algorithm on the fly, allowing to use the same hardware for different probes. The system was prototyped using Very High Speed Integrated Circuits Hardware Description Language (VHDL) into an Field Programmable Gate Array (FPGA) board. The design of the Embedded Digital System includes a Zero Phase Digital Filter, a Derivative Unit, and a Computational Unit designed using the VHDL-2008 Support Library. The prototype is able to compute the Plasma Electron Temperature and Density from a Single Langmuir probe. The system was tested using real data previously acquired from a single Langmuir probe. The plasma parameters obtained from the embedded system were compared with results computed using matlab yielding excellent matching. The new embedded system operates on 4096 samples versus 500 on the previous system, and completes its computations in 26 milliseconds compared with about 15 seconds on the previous system.

  17. Functionalisation of the carbon nanofibres by plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Brandl, W.; Marginean, G

    2004-01-30

    Vapour grown carbon nanofibres (VGCNF) were surface modified through cold oxygen plasma treatment under reduced pressure. The fibre morphology was studied by SEM (scanning electron microscopy) and HRTEM (high resolution transmission electron microscopy). The nanofibres surface functionalisation was elucidated by NaOH-titration, contact angle and surface energy measurements of the carbon nanofibres before and after plasma treatment. Oxygen plasma treatment introduced oxygen containing functional groups (hydroxylic, carbonylic and carboxylic groups) onto the fibre surfaces and also enhanced the fibre surface porosity (by etching) as well as the surface energy. There is yet to be mentioned that the fibre modifications have to occur only in the first few atomic layers. The plasma treatment can be proposed as a suitable method to change nanofibres surface from hydrophobic to hydrophilic.

  18. Dielectric barrier discharge plasma treatment of cellulose nanofibre surfaces

    DEFF Research Database (Denmark)

    Kusano, Yukihiro; Madsen, Bo; Berglund, Linn

    2017-01-01

    on the nanofibre surface. Ultrasonic irradiation further enhanced the wetting and oxidation of the nanofibre coating. Scanning electron microscopic observations showed skeleton-like features on the plasma-treated surface, indicating preferential etching of weaker domains, such as low-molecular weight domains......Dielectric barrier discharge plasma treatment was applied to modify cellulose nanofibre (CNF) surfaces with and without ultrasonic irradiation. The plasma treatment improved the wetting by deionised water and glycerol, and increased the contents of oxygen, carbonyl group, and carboxyl group...... and amorphous phases. Ultrasonic irradiation also improved the uniformity of the treatment. Altogether, it is demonstrated that atmospheric pressure plasma treatment is a promising technique to modify the CNF surface before composite processing....

  19. Ambient plasma treatment of silicon wafers for surface passivation recovery

    Science.gov (United States)

    Ge, Jia; Prinz, Markus; Markert, Thomas; Aberle, Armin G.; Mueller, Thomas

    2017-08-01

    In this work, the effect of an ambient plasma treatment powered by compressed dry air on the passivation quality of silicon wafers coated with intrinsic amorphous silicon sub-oxide is investigated. While long-time storage deteriorates the effective lifetime of all samples, a short ambient plasma treatment improves their passivation qualities. By studying the influence of the plasma treatment parameters on the passivation layers, an optimized process condition was identified which even boosted the passivation quality beyond its original value obtained immediately after deposition. On the other hand, the absence of stringent requirement on gas precursors, vacuum condition and longtime processing makes the ambient plasma treatment an excellent candidate to replace conventional thermal annealing in industrial heterojunction solar cell production.

  20. Plasma Treatment to Enhance Fuel Cell Water Management Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The objective of this proposal is to further define the potential for plasma treatment technology, developed by the NASA Glenn Research Center (GRC) to modify and...

  1. Air plasma treatment of liquid covered tissue: long timescale chemistry

    Science.gov (United States)

    Lietz, Amanda M.; Kushner, Mark J.

    2016-10-01

    Atmospheric pressure plasmas have shown great promise for the treatment of wounds and cancerous tumors. In these applications, the sample is usually covered by a thin layer of a biological liquid. The reactive oxygen and nitrogen species (RONS) generated by the plasma activate and are processed by the liquid before the plasma produced activation reaches the tissue. The synergy between the plasma and the liquid, including evaporation and the solvation of ions and neutrals, is critical to understanding the outcome of plasma treatment. The atmospheric pressure plasma sources used in these procedures are typically repetitively pulsed. The processes activated by the plasma sources have multiple timescales—from a few ns during the discharge pulse to many minutes for reactions in the liquid. In this paper we discuss results from a computational investigation of plasma-liquid interactions and liquid phase chemistry using a global model with the goal of addressing this large dynamic range in timescales. In modeling air plasmas produced by a dielectric barrier discharge over liquid covered tissue, 5000 voltage pulses were simulated, followed by 5 min of afterglow. Due to the accumulation of long-lived species such as ozone and N x O y , the gas phase dynamics of the 5000th discharge pulse are different from those of the first pulse, particularly with regards to the negative ions. The consequences of applied voltage, gas flow, pulse repetition frequency, and the presence of organic molecules in the liquid on the gas and liquid reactive species are discussed.

  2. Supersymmetric plasma systems and their nonsupersymmetric counterparts

    CERN Document Server

    Czajka, Alina

    2016-01-01

    In this thesis a systematic comparison of supersymmetric plasma systems and their nonsupersymmetric counterparts is presented. The work is motivated by the AdS/CFT correspondence and the main aim is to check how much the plasma governed by the N=4 super Yang-Mills theory resembles the quark-gluon plasma studied experimentally in relativistic heavy-ion collisions. The analysis is done in a weak coupling regime where perturbative methods are applicable. Since the Keldysh-Schwinger approach is used, not only equilibrium but also nonequilibrium plasmas, which are assumed to be ultrarelativistic, are under consideration. First, using the functional techniques we introduce Faddeev-Popov ghosts into the Keldysh-Schwinger formalism of nonAbelian gauge theories. Next the collective excitations of the N=1 SUSY QED plasma are considered and compared to those of the usual QED system. The analysis is repeated to confront with each other the plasmas governed by the N=4 super Yang-Mills and QCD theories. Finally, transport ...

  3. Improving Seed Germination and Peanut Yields by Cold Plasma Treatment

    Science.gov (United States)

    Li, Ling; Li, Jiangang; Shen, Minchong; Hou, Jinfeng; Shao, Hanliang; Dong, Yuanhua; Jiang, Jiafeng

    2016-10-01

    This study explored the effects of cold plasma treatment on seed germination, plant growth, and peanut yield. Cold plasma treatment improved germination and seedling growth, and the 120 W treatment produced the best effect. Germination potential and germination rate were markedly raised by 150% and 21%, respectively. Germination was accelerated and the uniformity of emergence improved. The apparent contact angle was decreased by 53%. Seedling shoot and root dry weights increased by 11% and 9%. Leaf area, leaf thickness, leaf nitrogen concentration, chlorophyll contents, and dry weight at the fruiting stage, together with plant height, stem diameter, and root dry weight at the mature stage were all markedly raised by the cold plasma treatment. The cold plasma treatment enhanced yield components, such as branch numbers per plant, pod numbers per plant, and 100 pod weights by 8%, 13%, and 9%, respectively, compared to the control. Furthermore, the yield improved by 10%. These results suggested that cold plasma treatment improved germination, plant growth, and yield, which might be due to the cold plasma increasing the leaf area, nitrogen concentrations, and chlorophyll contents. supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China (No. 2012BAD05B04), National Natural Science Foundation of China (No. 41201241), “Strategic Priority Research Program” of the Chinese Academy of Sciences (No. XDB15030301) and Jiangsu Province Science and Technology Support Program (No. BE2013452)

  4. Portable treatment systems study

    Energy Technology Data Exchange (ETDEWEB)

    Sherick, M.J.; Schwinkendorf, W.E.; Bechtold, T.E.; Cole, L.T.

    1997-03-01

    In developing their Site Treatment Plans (STPs), many of the Department of Energy installations identified some form of portable treatment, to facilitate compliant disposition of select mixed low-level wastestreams. The Environmental Management Office of Science and Technology requested that a systems study be performed to better define the potential role of portable treatment with respect to mixed low-level waste, highlight obstacles to implementation, and identify opportunities for future research and development emphasis. The study was performed by first establishing a representative set of mixed waste, then formulating portable treatment system concepts to meet the required processing needs for these wastes. The portable systems that were conceptualized were evaluated and compared to a fixed centralized treatment alternative. The system evaluations include a life-cycle cost analysis and an assessment of regulatory, institutional, and technical issues associated with the potential use of portable systems. The results of this study show that when all costs are included, there are no significant cost differences between portable systems and fixed systems. However, it is also emphasized that many uncertainties exist that could impact the cost of implementing portable treatment systems. Portable treatment could be made more attractive through private sector implementation, although there is little economic incentive for a commercial vendor to develop small, specialized treatment capabilities with limited applicability. Alternatively, there may also be valid reasons why fixed units cannot be used for some problematic wastestreams. In any event, there are some site-specific problems that still need to be addressed, and there may be some opportunity for research and development to make a positive impact in these areas.

  5. Cold plasma treatment in wound care: efficacy and risk assessment

    Science.gov (United States)

    Stoffels, Eva

    2007-10-01

    Cold atmospheric plasma is an ideal medium for non-destructive modification of vulnerable surfaces. One of the most promising medical applications of cold plasma treatment is wound healing. Potential advantages in wound healing have been demonstrated in vitro: the plasma does not necrotize the cells and does not affect the extracellular matrix [1], has clear bactericidal or bacteriostatic effects [2], and stimulates fibroblast cells towards faster attachment and proliferation [3]. However, safety issues, such as the potential cytotoxicity of the plasma must be clarified prior to clinical implementation. This work comprises the recent facts on sub-lethal plasma effects on mammalian cells, as well as studies on apoptosis induction and quantitative assessment of DNA damage. Fibroblast, smooth muscle and endothelial cells were treated using the standard cold plasma needle [1,2]; intra- and extracellular oxidant levels as well as the influence of the plasma on intracellular antioxidant balance were monitored using appropriate fluorescent markers [1]. We have studied long-term cellular damage was monitored using flow cytometry to determine the DNA profiles in treated cells. Dose-response curves were obtained: increased proliferation as well as apoptosis were visualized under different treatment conditions. The results from the in vitro studies are satisfying. [1] I.E. Kieft, ``Plasma needle: exploring biomedical applications of non-thermal plasmas'', PhD Thesis, Eindhoven University of Technology (2005). [2] R.E.J. Sladek, ``Plasma needle: non-thermal atmospheric plasmas in dentistry'' PhD Thesis, Eindhoven University of Technology (2006). [3] I.E. Kieft, D. Darios, A.J.M. Roks, E. Stoffels, IEEE Trans. Plasma Sci. 34(4), 2006, pp. 1331-1336.

  6. Plasma treatment of air pollution control residues.

    Science.gov (United States)

    Amutha Rani, D; Gomez, E; Boccaccini, A R; Hao, L; Deegan, D; Cheeseman, C R

    2008-01-01

    Air pollution control (APC) residues from waste incineration have been blended with silica and alumina and the mix melted using DC plasma arc technology. The chemical composition of the fully amorphous homogeneous glass formed has been determined. Waste acceptance criteria compliance leach testing demonstrates that the APC residue derived glass releases only trace levels of heavy metals (Pb (production of higher value glass-ceramic products.

  7. Hydrogen plasma treatment of silicon dioxide for improved silane deposition.

    Science.gov (United States)

    Gupta, Vipul; Madaan, Nitesh; Jensen, David S; Kunzler, Shawn C; Linford, Matthew R

    2013-03-19

    We describe a method for plasma cleaning silicon surfaces in a commercial tool that removes adventitious organic contamination and enhances silane deposition. As shown by wetting, ellipsometry, and XPS, hydrogen, oxygen, and argon plasmas effectively clean Si/SiO2 surfaces. However, only hydrogen plasmas appear to enhance subsequent low-pressure chemical vapor deposition of silanes. Chemical differences between the surfaces were confirmed via (i) deposition of two different silanes: octyldimethylmethoxysilane and butyldimethylmethoxysilane, as evidenced by spectroscopic ellipsometry and wetting, and (ii) a principal components analysis (PCA) of TOF-SIMS data taken from the different plasma-treated surfaces. AFM shows no increase in surface roughness after H2 or O2 plasma treatment of Si/SiO2. The effects of surface treatment with H2/O2 plasmas in different gas ratios, which should allow greater control of surface chemistry, and the duration of the H2 plasma (complete surface treatment appeared to take place quickly) are also presented. We believe that this work is significant because of the importance of silanes as surface functionalization reagents, and in particular because of the increasing importance of gas phase silane deposition.

  8. Plasma Processes : Sheath and plasma parameters in a magnetized plasma system

    Indian Academy of Sciences (India)

    Bornali Singha; A Sharma; J Chutia

    2000-11-01

    The variation of electron temperature and plasma density in a magnetized 2 plasma is studied experimentally in presence of a grid placed at the middle of the system. Plasma leaks through the negatively biased grid from the source region into the diffused region. It is observed that the electron temperature increases with the magnetic field in the diffused region whereas it decreases in the source region of the system for a constant grid biasing voltage. Also, investigation is done to see the change of electron temperature with grid biasing voltage for a constant magnetic field. This is accompanied by the study of the variation of sheath structure across the grid for different magnetic field and grid biasing voltage as well. It reveals that with increasing magnetic field and negative grid biasing voltage, the sheath thickness expands.

  9. In situ chitosan gelation initiated by atmospheric plasma treatment.

    Science.gov (United States)

    Molina, R; Jovancic, P; Vilchez, S; Tzanov, T; Solans, C

    2014-03-15

    This work reports on the feasibility of atmospheric dielectric barrier discharge (DBD) plasma as a novel synthetic pathway for the liquid phase gelation of chitosan. The DBD plasma chitosan gelation process did not significantly alter the chemical structure of the biopolymer as confirmed by FTIR study. However, the oxidation processes and local heating effect associated with the solvent evaporation during the plasma treatment could provoke both reaction of chitosan degradation and the cleavage of β-1-4-glycosidic linkages with the concomitant generation of aldehyde groups able to crosslink via Schiff-base with amino groups from other chitosan molecules. Shear viscosity measurements suggested the formation of chitosan fragments of lower molecular weight after the plasma treatment of 1% (w/v) chitosan and fragments of higher molecular weight after the plasma treatment of 2% (w/v) chitosan. The crosslinking density of hydrogels generated during the in situ DBD plasma chitosan gelation process increased as a function of the treatment time and concentration of chitosan. As of consequence of the increase of the cross-linking density, the equilibrium swelling ratio and water content decreased significantly.

  10. Colour Fading of Textile Fabric by Plasma Treatment

    Directory of Open Access Journals (Sweden)

    H. F. Cheung

    2013-01-01

    Full Text Available Colour fading of a reactive dye (C.I. Reactive Blue 19 dyed textile fabric was performed by atmospheric pressure plasma (APP treatment with the use of plasma jet. Under the APP treatment condition of treatment time = 5 sec/mm; ignition power = 160 W; oxygen concentration = 1%; jet distance = 3 mm, significant colour-fading effect was achieved. For comparison purpose, the reactive dye dyed textile fabric was subjected to conventional enzymatic colour-fading process. Experimental results revealed that the APP-induced colour-fading effect was comparable with conventional enzymatic colour-fading process.

  11. Surface Modification of Medical Polyurethane by Plasma Treatment

    Science.gov (United States)

    Li, Dejun; Zhao, Jie; Gu, Hanqing; Lu, Mozhu; Ding, Fuqing; Hu, Jianfang

    1992-02-01

    The wettability and surface structure of plasma treatment on medical polyurethane were studied. Two kinds of gas, N2, Ar, were used to create the low-temperature plasma under low pressure. The wettability was investigated by means of the sessile drop method using water, the results show that the contact angle of water decreases from 78.8° to 61.9° as the treatment time increases. The results of electron spectroscopy for chemical analysis indicate that original chemical bonds were broken up after plasma treatment, which was the main reason for the surface modification. At same time, the results of electron spinning resonance show that the amounts of radicals did not increase significantly after treatment, which is advantageous to clinical practice of polyurethane.

  12. Influence of Plasma Treatments on the Frictional Performance of Rubbers

    NARCIS (Netherlands)

    Wolthuizen, D.J.; Martinez-Martinez, D.; Pei, Y.T.; Hosson, J.Th.M. De

    2012-01-01

    The frictional performance of several rubbers after pulsed-DC plasma treatments has been examined. In all cases, the treated rubbers showed better performance than the corresponding untreated ones. Stronger treatments, in terms of longer process time and/or higher substrate bias voltage, led to larg

  13. Thermal plasma treatment of cell-phone waste : preliminary result

    Energy Technology Data Exchange (ETDEWEB)

    Ruj, B. [Central Mechanical Engineering Research Inst., Durgapur (India). Thermal Engineering Group; Chang, J.S.; Li, O.L. [McMaster Univ., Hamilton, ON (Canada). Dept. of Engineering Physics; Pietsch, G. [RWTH Aachen Univ., Aachen (Germany)

    2010-07-01

    The cell phone is an indispensable service facilitator, however, the disposal and recycling of cell phones is a major problem. While the potential life span of a mobile phone, excluding batteries, is over 10 years, most of the users upgrade their phones approximately four times during this period. Cell phone waste is significantly more hazardous than many other municipal wastes as it contains thousands of components made of toxic chemicals and metals like lead, cadmium, chromium, mercury, polyvinyl chlorides (PVC), brominated flame retardants, beryllium, antimony and phthalates. Cell phones also use many expensive rare metals. Since cell phones are made up of plastics, metals, ceramics, and trace other substances, primitive recycling or disposal of cell phone waste to landfills and incinerators creates irreversible environmental damage by polluting water and soil, and contaminating air. In order to minimize releases into the environment and threat to human health, the disposal of cell phones needs to be managed in an environmentally friendly way. This paper discussed a safer method of reducing the generation of syngas and hydrocarbons and metal recovery through the treatment of cell phone wastes by a thermal plasma. The presentation discussed the experiment, with particular reference to sample preparation; experimental set-up; and results four samples with different experimental conditions. It was concluded that the plasma treatment of cell phone waste in reduced condition generates gaseous components such as hydrogen, carbon monoxide, and hydrocarbons which are combustible. Therefore, this system is an energy recovery system that contributes to resource conservation and reduction of climate change gases. 5 refs., 2 tabs., 2 figs.

  14. Functionalization of Natural Cork Composite with Microcapsules after Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Fernando Ribeiro Oliveira

    2014-01-01

    Full Text Available This research aims to study the chemical and physical modifications of natural cork agglomerate after plasma treatment using dielectric barrier discharge (DBD. Different experimental techniques were used to evaluate the surface alterations of the pretreated samples with DBD plasma, as well as the adsorption and adhesion of microcapsules in the substrate, namely, static and dynamic contact angle, surface energy, energy dispersive spectroscopy (EDS, Fourier transform infrared spectroscopy (FTIR, differential scanning calorimetry (DSC, and scanning electron microscopy (SEM. Plasma discharge greatly increases the wettability and surface energy of the samples. Chemical and physical analyses of the cork agglomerate confirmed considerable surface modification. All these surface changes of the cork after plasma treatment led to a remarkable increase in microcapsule adsorption and adhesion when compared with the untreated cork sample.

  15. Work function modifications of graphite surface via oxygen plasma treatment

    Science.gov (United States)

    Duch, J.; Kubisiak, P.; Adolfsson, K. H.; Hakkarainen, M.; Golda-Cepa, M.; Kotarba, A.

    2017-10-01

    The surface modification of graphite by oxygen plasma was investigated experimentally (X-ray diffraction, nanoparticle tracking analysis, laser desorption ionization mass spectrometry, thermogravimetry, water contact angle) and by molecular modelling (Density Functional Theory). Generation of surface functional groups (mainly sbnd OHsurf) leads to substantial changes in electrodonor properties and wettability gauged by work function and water contact angle, respectively. The invoked modifications were analyzed in terms of Helmholtz model taking into account the theoretically determined surface dipole moment of graphite-OHsurf system (μ = 2.71 D) and experimentally measured work function increase (from 0.75 to 1.02 eV) to determine the sbnd OH surface coverage (from 0.70 to 1.03 × 1014 groups cm-2). Since the plasma treatment was confined to the surface, the high thermal stability of the graphite material was preserved as revealed by the thermogravimetric analysis. The obtained results provide a suitable quantitative background for tuning the key operating parameters of carbon electrodes: electronic properties, interaction with water and thermal stability.

  16. The treatment of tongue haemangioma by plasma knife surgery.

    Science.gov (United States)

    Kutluhan, A; Bozdemir, K; Ugras, S

    2008-11-01

    A seven-year-old girl presented with a 4 cm x 2 cm lesion of the tongue which was located at the posterior one-third in the midline. The lesion was excised by plasma knife surgery. No complication, such as bleeding, shortness of breath or infection, occurred after the treatment. Plasma knife surgery is an acceptable choice for selected benign lingual vascular malformations.

  17. Enhancing Cold Atmospheric Plasma Treatment Efficiency for Cancer Therapy

    Science.gov (United States)

    Cheng, Xiaoqian

    To improve efficiency and safety of anti-cancer therapies the researchers and clinicians alike are prompted to develop targeted combined therapies that especially minimize damage to healthy tissues while eradicating the body of cancerous tissues. Previous research in cold atmospheric plasma (CAP) and cancer cell interaction has repeatedly proven that cold plasma induced cell death. In this study, we seek to integrate the medical application of CAP. We proposed and implemented 3 novel ideas to enhance efficacy and selectivity of cancer therapy. It is postulated that the reactive oxygen species (ROS) and reactive nitrogen species (RNS) play a major role in the CAP cancer therapy. We determined a mechanism of CAP therapy on glioblastoma cells (U87) through an understanding of the composition of CAP, including output voltage, treatment time, and gas flow-rate. We varied the characteristics of the cold plasma in order to obtain different major species (such as O, OH, N2+, and N2 lines). "plasma dosage" D ~ Q * V * t. is defined, where D is the entire "plasma dosage"; Q is the flow rate of feeding gas; V is output voltage; t is treatment time. The proper CAP dosage caused 3-fold cell death in the U87 cells compared to the normal human astrocytes E6/E7 cells. We demonstrated there is a synergy between AuNPS and CAP in cancer therapy. Specifically, the concentration of AuNPs plays an important role on plasma therapy. At an optimal concentration, gold nanoparticles can significantly induce U87 cell death up to a 30% overall increase compared to the control group with the same plasma dosage but no AuNPs applied. The ROS intensity of the corresponding conditions has a reversed trend compared to cell viability. This matches with the theory that intracellular ROS accumulation results in oxidative stress, which further changes the intracellular pathways, causing damage to the proteins, lipids and DNA. Our results show that this synergy has great potential in improving the

  18. Preliminary Study of Thermal Treatment of Coke Wastewater Sludge Using Plasma Torch

    Science.gov (United States)

    Li, Mingshu; Li, Shengli; Sun, Demao; Liu, Xin; Feng, Qiubao

    2016-10-01

    Thermal plasma was applied for the treatment of coke wastewater sludge derived from the steel industry in order to investigate the feasibility of the safe treatment and energy recovery of the sludge. A 30 kW plasma torch system was applied to study the vitrification and gas production of coke wastewater sludge. Toxicity leaching results indicated that the sludge treated via the thermal plasma process converted into a vitrified slag which resisted the leaching of heavy metals. CO2 was utilized as working gas to study the production and heat energy of the syngas. The heating value of the gas products by thermal plasma achieved 8.43 kJ/L, indicating the further utilization of the gas products. Considering the utilization of the syngas and recovery heat from the gas products, the estimated treatment cost of coke wastewater sludge via plasma torch was about 0.98 CNY/kg sludge in the experiment. By preliminary economic analysis, the dehydration cost takes an important part of the total sludge treatment cost. The treatment cost of the coke wastewater sludge with 50 wt.% moisture was calculated to be about 1.45 CNY/kg sludge dry basis. The treatment cost of the coke wastewater sludge could be effectively controlled by decreasing the water content of the sludge. These findings suggest that an economic dewatering pretreatment method could be combined to cut the total treatment cost in an actual treatment process.

  19. Enhancement-mode AlGaN/GaN HEMTs fabricated by fluorine plasma treatment

    Institute of Scientific and Technical Information of China (English)

    Quan Si; Hao Yue; Ma Xiaohua; Xie Yuanbin; Ma Jigang

    2009-01-01

    The fabrication of enhancement-mode A1GaN/GaN HEMTs by fluorine plasma treatment on sapphire substrates is reported. A new method is used to fabricate devices with different fluorine plasma RF power treatments on one wafer to avoid differences between different wafers. The plasma-treated gate regions of devices treated with different fluorine plasma RF powers were separately opened by a step-and-repeat system. The properties of these devices are compared and analyzed. The devices with 150 W fluorine plasma treatment power and with 0.6μm gate-length exhibited a threshold voltage of 0.57 V, a maximum drain current of 501 mA/mm, a maximumtransconductance of 210 m S/mm, a current gain cutoff frequency of 19.4 GHz and a maximum oscillation frequency of 26 GHz. An excessive fluorine plasma treatment power of 250 W results in a small maximum drain current, which can be attributed to the implantation of fluorine plasma in the channel.

  20. Plasma confinement system and methods for use

    Energy Technology Data Exchange (ETDEWEB)

    Jarboe, Thomas R.; Sutherland, Derek

    2017-09-05

    A plasma confinement system is provided that includes a confinement chamber that includes one or more enclosures of respective helicity injectors. The one or more enclosures are coupled to ports at an outer radius of the confinement chamber. The system further includes one or more conductive coils aligned substantially parallel to the one or more enclosures and a further set of one or more conductive coils respectively surrounding portions of the one or more enclosures. Currents may be provided to the sets of conductive coils to energize a gas within the confinement chamber into a plasma. Further, a heat-exchange system is provided that includes an inner wall, an intermediate wall, an outer wall, and pipe sections configured to carry coolant through cavities formed by the walls.

  1. [Treatment of systemic sclerosis.

    NARCIS (Netherlands)

    Hoogen, F.H.J. van den

    2006-01-01

    Systemic sclerosis (SSc, scleroderma) is a multisystem disease with a bad prognosis. No drugs have been shown to cure this disease. In view of its pathogenesis, in which immune responses are presumed to play an important role, immune suppressive therapies are widely applied in the treatment of SSc.

  2. [Treatment of systemic sclerosis.

    NARCIS (Netherlands)

    Hoogen, F.H.J. van den

    2006-01-01

    Systemic sclerosis (SSc, scleroderma) is a multisystem disease with a bad prognosis. No drugs have been shown to cure this disease. In view of its pathogenesis, in which immune responses are presumed to play an important role, immune suppressive therapies are widely applied in the treatment of SSc.

  3. Influence of Chemical Precleaning on the Plasma Treatment Efficiency of Aluminum by RF Plasma Pencil

    Science.gov (United States)

    Vadym, Prysiazhnyi; Pavel, Slavicek; Eliska, Mikmekova; Milos, Klima

    2016-04-01

    This paper is aimed to show the influence of initial chemical pretreatment prior to subsequent plasma activation of aluminum surfaces. The results of our study showed that the state of the topmost surface layer (i.e. the surface morphology and chemical groups) of plasma modified aluminum significantly depends on the chemical precleaning. Commonly used chemicals (isopropanol, trichlorethane, solution of NaOH in deionized water) were used as precleaning agents. The plasma treatments were done using a radio frequency driven atmospheric pressure plasma pencil developed at Masaryk University, which operates in Ar, Ar/O2 gas mixtures. The effectiveness of the plasma treatment was estimated by the wettability measurements, showing high wettability improvement already after 0.3 s treatment. The effects of surface cleaning (hydrocarbon removal), surface oxidation and activation (generation of OH groups) were estimated using infrared spectroscopy. The changes in the surface morphology were measured using scanning electron microscopy. Optical emission spectroscopy measurements in the near-to-surface region with temperature calculations showed that plasma itself depends on the sample precleaning procedure.

  4. Chemical analysis of plasma-assisted antimicrobial treatment on cotton

    Science.gov (United States)

    Kan, C. W.; Lam, Y. L.; Yuen, C. W. M.; Luximon, A.; Lau, K. W.; Chen, K. S.

    2013-06-01

    This paper explores the use of plasma treatment as a pretreatment process to assist the application of antimicrobial process on cotton fabric with good functional effect. In this paper, antimicrobial finishing agent, Microfresh Liquid Formulation 9200-200 (MF), and a binder (polyurethane dispersion, Microban Liquid Formulation R10800-0, MB) will be used for treating the cotton fabric for improving the antimicrobial property and pre-treatment of cotton fabric by plasma under atmospheric pressure will be employed to improve loading of chemical agents. The chemical analysis of the treated cotton fabric will be conducted by Fourier transform Infrared Spectroscopy.

  5. Plasma electrolytic treatment of products after selective laser melting

    Science.gov (United States)

    Kashapov, L. N.; Kashapov, N. F.; Kashapov, R. N.; Denisov, D. G.

    2016-01-01

    The aim of the work was to study the possibilities of plasma electrolytic treatment for cleaning surfaces of metal products obtained by the SLM-technology. We found that the most effective cleaning from the large alloy particles occurs in the "hydrodynamic" mode, when the occurrence of hydrodynamic pulses observed. Further smoothing of irregularities eliminated by a stable burning of discharge in vapor shell. Analysis the morphology of the surface of difficult specialized products, such as crown conical gears, after plasma hydrodynamic treatment showed efficiency and advantages in comparison to conventional methods of final cleaning such as shot blasting.

  6. Plasma Surface Treatment of Powder Materials — Process and Application

    Directory of Open Access Journals (Sweden)

    Monika Pavlatová

    2012-01-01

    Full Text Available Polyolefin particles are hydrophobic, and this prevents their use for various applications. Plasma treatment is an environment-friendly polyolefin hydrophilisation method. We developed an industrial-scale plant for plasma treatment of particles as small as micrometers in diameter. Materials such as PE waxes, UHMWPE and powders for rotomolding production were tested to verify their new surface properties. We achieved significantly increased wettability of the particles, so that they are very easily dispersive in water without agglomeration, and their higher surface energy is retained even after sintering in the case of rotomolding powders.

  7. Experimental Study on Plasma Surface Treatment of Capacitors Film

    Science.gov (United States)

    Ling, Dai; Ting, Yin; Fuchang, Lin; Fei, Yan

    Plasma surface treatment is an optional way to change the electrical performance of the film capacitors used widely in pulse power application. This paper presents the experimental study of glow discharge plasma treatment to polyphenylene sulfide (PPS) film. By using infrared spectra and scanning electron microscope (SEM), the chemical component and microstructure of material surface has detected to be changed with different treatment strength and various discharge gas. After treatment, the film surface tends to be rougher and some sorts of polar radicals or groups found to be introduced. But there is no obvious change of the electrical strength of the film. At last, theoretical analysis has been carried out with polypropylene film experimental treatment results in author's former work.

  8. Polymer Surface Treatment by Atmospheric Pressure Low Temperature Surface Discharge Plasma:Its Characteristics and Comparison with Low Pressure Oxygen Plasma Treatment

    Institute of Scientific and Technical Information of China (English)

    Atsushi KUWABARA; Shin-ichi KURODA; Hitoshi KUBOTA

    2007-01-01

    The polymer treatment with a low-temperature plasma jet generated on the atmospheric pressure surface discharge (SD) plasma is performed.The change of the surface property over time,in comparison with low pressure oxygen (O2) plasma treatment,is examined.As one compares the treatment by atmospheric pressure plasma to that by the low pressure O2 plasma of PS (polystyrene) the treatment effects were almost in complete agreement.However,when the atmospheric pressure plasma was used for PP(polypropylene),it produced remarkable hydrophilic effects.

  9. Test for bacterial resistance build-up against plasma treatment

    Science.gov (United States)

    Zimmermann, J. L.; Shimizu, T.; Schmidt, H.-U.; Li, Y.-F.; Morfill, G. E.; Isbary, G.

    2012-07-01

    It is well known that the evolution of resistance of microorganisms to a range of different antibiotics presents a major problem in the control of infectious diseases. Accordingly, new bactericidal ‘agents’ are in great demand. Using a cold atmospheric pressure (CAP) plasma dispenser operated with ambient air, a more than five orders of magnitude inactivation or reduction of Methicillin-resistant Staphylococcus aureus (MRSA; resistant against a large number of the tested antibiotics) was obtained in less than 10 s. This makes CAP the most promising candidate for combating nosocomial (hospital-induced) infections. To test for the occurrence and development of bacterial resistance against such plasmas, experiments with Gram-negative bacteria (Escherichia coli) and Gram-positive bacteria (Enterococcus mundtii) were performed. The aim was to determine quantitative limits for primary (naturally) or secondary (acquired) resistance against the plasma treatment. Our results show that E. coli and E. mundtii possess no primary resistance against the plasma treatment. By generating four generations of bacteria for every strain, where the survivors of the plasma treatment were used for the production of the next generation, a lower limit to secondary resistance was obtained. Our results indicate that CAP technology could contribute to the control of infections in hospitals, in outpatient care and in disaster situations, providing a new, fast and efficient broad-band disinfection technology that is not constrained by bacterial resistance mechanisms.

  10. Intra-Articular Injections of Platelet-Rich Plasma versus Hyaluronic Acid in the Treatment of Osteoarthritic Knee Pain: A Randomized Clinical Trial in the Context of the Spanish National Health Care System

    Directory of Open Access Journals (Sweden)

    Elvira Montañez-Heredia

    2016-07-01

    Full Text Available Intra-articular injection of platelet-rich plasma (PRP has been established as a suitable treatment for knee osteoarthritis. Here, we present a double-blind randomized controlled clinical trial, conducted in a public Hospital of the Spanish National Health Care System, to evaluate the efficacy of injecting autologous PRP versus hyaluronic acid (HA in knee osteoarthritis. PRP was manufactured in Malaga’s Regional Blood Center (Spain. Patients that met the eligibility criteria were randomized into a PRP group or a HA group. Pain and functional improvements were assessed pre- and post-treatment (three and six months follow-up using the Visual Analogue Scale (VAS; the Knee and Osteoarthritis Outcome System (KOOS scale and the European Quality of Life scale (EUROQOL. Both groups presented pain reduction at six months. The VAS scores for the PRP group improved by at least 50% from their initial value, particularly at three months following the final infiltration, with results resembling those of the HA group at six months. PRP was more effective in patients with lower osteoarthritis grades. Both treatments improved pain in knee osteoarthritis patients without statistically significant differences between them. However, PRP injection was proved to improve pain three months after the final infiltration and to be more effective in lower osteoarthritis grades.

  11. Intra-Articular Injections of Platelet-Rich Plasma versus Hyaluronic Acid in the Treatment of Osteoarthritic Knee Pain: A Randomized Clinical Trial in the Context of the Spanish National Health Care System

    Science.gov (United States)

    Montañez-Heredia, Elvira; Irízar, Sofia; Huertas, Pedro J.; Otero, Esperanza; del Valle, Marta; Prat, Isidro; Díaz-Gallardo, Macarena S.; Perán, Macarena; Marchal, Juan A.; Hernandez-Lamas, María del Carmen

    2016-01-01

    Intra-articular injection of platelet-rich plasma (PRP) has been established as a suitable treatment for knee osteoarthritis. Here, we present a double-blind randomized controlled clinical trial, conducted in a public Hospital of the Spanish National Health Care System, to evaluate the efficacy of injecting autologous PRP versus hyaluronic acid (HA) in knee osteoarthritis. PRP was manufactured in Malaga’s Regional Blood Center (Spain). Patients that met the eligibility criteria were randomized into a PRP group or a HA group. Pain and functional improvements were assessed pre- and post-treatment (three and six months follow-up) using the Visual Analogue Scale (VAS); the Knee and Osteoarthritis Outcome System (KOOS) scale and the European Quality of Life scale (EUROQOL). Both groups presented pain reduction at six months. The VAS scores for the PRP group improved by at least 50% from their initial value, particularly at three months following the final infiltration, with results resembling those of the HA group at six months. PRP was more effective in patients with lower osteoarthritis grades. Both treatments improved pain in knee osteoarthritis patients without statistically significant differences between them. However, PRP injection was proved to improve pain three months after the final infiltration and to be more effective in lower osteoarthritis grades. PMID:27384560

  12. Intra-Articular Injections of Platelet-Rich Plasma versus Hyaluronic Acid in the Treatment of Osteoarthritic Knee Pain: A Randomized Clinical Trial in the Context of the Spanish National Health Care System.

    Science.gov (United States)

    Montañez-Heredia, Elvira; Irízar, Sofia; Huertas, Pedro J; Otero, Esperanza; Del Valle, Marta; Prat, Isidro; Díaz-Gallardo, Macarena S; Perán, Macarena; Marchal, Juan A; Hernandez-Lamas, María Del Carmen

    2016-07-02

    Intra-articular injection of platelet-rich plasma (PRP) has been established as a suitable treatment for knee osteoarthritis. Here, we present a double-blind randomized controlled clinical trial, conducted in a public Hospital of the Spanish National Health Care System, to evaluate the efficacy of injecting autologous PRP versus hyaluronic acid (HA) in knee osteoarthritis. PRP was manufactured in Malaga's Regional Blood Center (Spain). Patients that met the eligibility criteria were randomized into a PRP group or a HA group. Pain and functional improvements were assessed pre- and post-treatment (three and six months follow-up) using the Visual Analogue Scale (VAS); the Knee and Osteoarthritis Outcome System (KOOS) scale and the European Quality of Life scale (EUROQOL). Both groups presented pain reduction at six months. The VAS scores for the PRP group improved by at least 50% from their initial value, particularly at three months following the final infiltration, with results resembling those of the HA group at six months. PRP was more effective in patients with lower osteoarthritis grades. Both treatments improved pain in knee osteoarthritis patients without statistically significant differences between them. However, PRP injection was proved to improve pain three months after the final infiltration and to be more effective in lower osteoarthritis grades.

  13. Plasma needle for in vivo medical treatment: recent developments and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Stoffels, E [Department of Biomedical Engineeringw, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Kieft, I E [Department of Biomedical Engineeringw, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Sladek, R E J [Department of Biomedical Engineeringw, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Bedem, L J M van den [Department of Mechanical Engineering, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Laan, E P van der [Department of Mechanical Engineering, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Steinbuch, M [Department of Mechanical Engineering, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands)

    2006-11-01

    In this paper we describe the hitherto unravelled facts on the interactions of a cold atmospheric plasma with living cells and tissues. A specially designed source, plasma needle, is a low-power discharge, which operates under the threshold of tissue damage. When applied properly, the needle does not cause fatal cell injury which would result in cell death (necrosis). Instead, it allows precise and localized cell removal by means of the so-called cell detachment. In addition, plasma can be used for bacterial disinfection. Because of mild treatment conditions, plasma disinfection can be performed in vivo, e.g. on wounds and dental cavities. Presently, one strives to obtain a better control of the operating device. Therefore, plasma has been characterized using a variety of diagnostics, and a smart system has been designed for the positioning of the device with respect to the treated surface.

  14. Non-thermal atmospheric pressure plasma jet and its application for polymer treatment

    OpenAIRE

    Sarani, Abdollah

    2010-01-01

    Non-thermal atmospheric pressure plasma jet is a suitable source for polymer treatment. The main characteristic of this plasma jet is the remote operation and its scalable dimension, thus, allowing local treatment of 3D surfaces. In this work an atmospheric pressure DBD plasma jet has been constructed and the application of the plasma jet for polymer treatment is investigated.

  15. Development of non-thermal atmospheric pressure plasma system for surface modification of polymeric materials

    Science.gov (United States)

    Kasih, T. P.

    2017-04-01

    Non-thermal plasma has become one of the new technologies which are highly developed now days. This happens because the cold plasma using the principle of generated reactive gases that have the ability to modify the surface properties of a material or product without changing the original characteristics of the material. The purpose of this study is to develop a cold plasma system that operates at atmospheric pressure and investigates the effect of cold plasma treatment to change the surface characteristics of the polymer material polyethylene (PE) at various time conditions. We are successfully developing a non-thermal plasma system that can operate at atmospheric pressure and can be run with Helium or Argon gas. The characteristics of plasma will be discussed from the view of its electrical property, plasma discharge regime andoperation temperature. Experiment results on plasma treatment on PE material shows the changes of surface properties of originally hydrophobic material PE becomes hydrophilic by only few seconds of plasma treatment and level of hydrophilicity become greater with increasing duration of plasma treatment. Confirmation of this is shown by the measurement of contact angle of droplets of water on the surface of PE are getting smaller.

  16. Influence of argon plasma treatment on polyethersulphone surface

    Indian Academy of Sciences (India)

    N L Singh; S M Pelagade; R S Rane; S Mukherjee; U P Deshpande; V Ganeshan; T Shripathi

    2013-01-01

    Polyethersulphone (PES) was modified to improve the hydrophilicity of its surface, which in turn helps in improving its adhesive property. The modified PES surface was characterized by contact angle measurement, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and Vicker’s microhardness measurement. The contact angles of the modified PES reduces from 49° to 10° for water. The surface free energy (SFE) calculated from measured contact angles increases from 66.3 to 79.5 mJ/m2 with the increase in plasma treatment time. The increase in SFE after plasma treatment is attributed to the functionalization of the polymer surface with hydrophilic groups. The XPS analysis shows that the ratio of O/C increases from 0.177 to 0.277 for modified PES polymer. AFM shows that the average surface roughness increases from 6.9 nm to 23.7 nm due to the increase in plasma treatment time. The microhardness of the film also increases with plasma treatment.

  17. Advanced modeling techniques in application to plasma pulse treatment

    Science.gov (United States)

    Pashchenko, A. F.; Pashchenko, F. F.

    2016-06-01

    Different approaches considered for simulation of plasma pulse treatment process. The assumption of a significant non-linearity of processes in the treatment of oil wells has been confirmed. Method of functional transformations and fuzzy logic methods suggested for construction of a mathematical model. It is shown, that models, based on fuzzy logic are able to provide a satisfactory accuracy of simulation and prediction of non-linear processes observed.

  18. Surface-nitriding treatment of steels using microwave-induced nitrogen plasma at atmospheric pressure

    Energy Technology Data Exchange (ETDEWEB)

    Sato, Shigeo, E-mail: s.sato@imr.tohoku.ac.jp [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 (Japan); Arai, Yuuki [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 (Japan); Yamashita, Noboru; Kojyo, Atsushi; Kodama, Kenji [Rigaku Corporation, Takatsuki, Osaka 569-1146 (Japan); Ohtsu, Naofumi [Kitami Institute of Technology, Kitami, Hokkaido 090-8507 (Japan); Okamoto, Yukio [Research Institute of Industrial Technology, Toyo University, Kawagoe 350-8585 (Japan); Wagatsuma, Kazuaki [Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577 (Japan)

    2012-07-15

    A rapid surface-nitriding system using microwave-induced nitrogen plasma at atmospheric pressure was developed for modifying iron and steel surfaces. Since the conventional plasma nitriding technique requires a low-pressure atmosphere in the treatment chamber, the population of excited nitrogen molecules in the plasma is limited. Accordingly, several hours are required for nitriding treatment. By contrast, the developed nitriding system can use atmospheric-pressure plasma through application of the Okamoto cavity for excitation of nitrogen plasma. The high population of excited nitrogen molecules induced by the atmospheric-pressure plasma allowed the formation of a nitriding layer that was several micrometers thick within 1 min and produced an expanded austenite iron phase with a high nitrogen concentration close to the solubility limit on the iron substrate. In addition, the nitriding treatment on high-chromium steel was performed by introducing a reducing gas such as NH{sub 3} and H{sub 2} into the treatment chamber. While the nitriding reaction did not proceed in a simple N{sub 2} atmosphere due to surface oxidation, the surface reduction induced by the NH{sub 3} or H{sub 2} gas promoted the nitriding reaction at the surface. These nitriding phenomena characteristics of the atmospheric-pressure plasma are discussed in this paper based on the effects of the specimen temperature and plasma atmosphere on the thickness, the chemical states, and the nitride compounds of the nitrided layer as investigated by X-ray diffraction, glow-discharge optical emission spectroscopy, and X-ray photoelectron spectroscopy.

  19. Collagen immobilization on polyethylene terephthalate surface after helium plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Aflori, Magdalena, E-mail: maflori@icmpp.ro [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Drobota, Mioara [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Dimitriu, Dan Gh. [Faculty of Physics, “Alexandru Ioan Cuza” University, 20A Bulevardul Carol I, 700505 Iasi (Romania); Stoica, Iuliana [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); Simionescu, Bogdana [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania); “Costin D. Nenitescu” Centre of Organic Chemistry, 202B Splaiul Independentei, 71141 Bucharest (Romania); Harabagiu, Valeria [Department of Polymers Physics and Polymeric Materials, “Petru Poni” Institute of Macromolecular Chemistry, 41A Gr. Ghica Voda Alley, 700487 Iasi (Romania)

    2013-11-20

    An attractive alternative to add new functionalities such as biocompatibility due to the micro- and nano-scaled modification of polymer surfaces is offered by plasma processing. Many vital processes of tissue repair and growth following injuries depend on the rate of adsorption and self-assembling of the collagen molecules at the interfaces. Consequently, besides the amount of protein, it is necessary to investigate the form in which the collagen molecules are organizing on the polymer surface. In this study, direct current (DC) helium plasma treatment was used in order to obtain poly(ethylene terephthalate) (PET) films with different amounts of collagen and different shapes of aggregates formed from the collagen molecules. The immobilization of collagen on PET surface was confirmed by XPS measurements, an increase of the nitrogen content by increasing the plasma exposure time being recorded. The SEM and AFM measurements revealed the presence of grains and dendrites of collagen formed on the polymer surface. At 15 min plasma treatment time, the polymer surface after collagen immobilization has a homogenous topography. Usually, one can find fibrils, coil or dendrimers of collagen formed in buffer solutions and immobilized on different polymer surfaces. On the other hand, in this particular configuration, the combination of DC plasma and helium gas as a PET functionalization tool is an original one. As the collagen is not covalently immobilized on the surfaces, it may interact with the cell culture medium proteins, part of the collagen might being replaced by other serum proteins.

  20. Hydrophobic corn starch thermoplastic films produced by plasma treatment.

    Science.gov (United States)

    Bastos, Daniele C; Santos, Anastácia E F; da Silva, Monica L V J; Simão, Renata A

    2009-07-01

    Polymer coating technology is currently an important field in science as it can lead to final products with enhanced characteristics characterized by desired bulk and surface properties. Low power plasmas can induce the polymerization of a precursor gas on the substrate surface as well as introduce functional groups under specific plasma conditions. In the present work, we studied the possibility of reducing water sensitivity of corn starch films by sulfur hexafluoride (SF(6)) plasma treatment. Confocal laser microscopy as well as atomic force microscopy was used to observe the main surface modifications and results indicated starch cross-linking. Fluoride was incorporated to the surface and the relationship between fluoride and sulfur incorporation to the surface was very much dependent on plasma power. Results indicate that fluoride could be preferentially incorporated on polymeric surfaces at -100V self-bias and the overall surface morphology determined the measured contact angle. The dynamic behavior of surface contact angle was observed to be very much dependent on the treatment time and force-distance curves were used to further characterize the chemical surface modifications locally. Optimized treatment conditions led to water contact angles up to 130 degrees . Even after being in contact with water for 10min, surfaces remained hydrophobic, presenting contact angles over 100 degrees .

  1. Periodontal treatment decreases plasma oxidized LDL level and oxidative stress.

    Science.gov (United States)

    Tamaki, Naofumi; Tomofuji, Takaaki; Ekuni, Daisuke; Yamanaka, Reiko; Morita, Manabu

    2011-12-01

    Periodontitis induces excessive production of reactive oxygen species in periodontal lesions. This may impair circulating pro-oxidant/anti-oxidant balance and induce the oxidation of low-density lipoprotein (LDL) in blood. The purpose of this study was to monitor circulating oxidized LDL and oxidative stress in subjects with chronic periodontitis following non-surgical periodontal treatment. Plasma levels of oxidized LDL and oxidative stress in 22 otherwise healthy non-smokers with chronic periodontitis (mean age 44.0 years) were measured at baseline and at 1 and 2 months after non-surgical periodontal treatment. At baseline, chronic periodontitis patients had higher plasma levels of oxidized LDL and oxidative stress than healthy subjects (p surgical periodontal treatment were effective in decreasing oxLDL, which was positively associated with a reduction in circulating oxidative stress.

  2. Use of cold atmospheric plasma in the treatment of cancer.

    Science.gov (United States)

    Babington, Parker; Rajjoub, Kenan; Canady, Jerome; Siu, Alan; Keidar, Michael; Sherman, Jonathan H

    2015-01-01

    Cold atmospheric plasma (CAP) is an emerging modality for the treatment of solid tumors. In-vitro experiments have demonstrated that with increasing doses of plasma, tumor cells assays display decreased cell viability. CAP is theorized to induce tumor cells into apoptosis via multiple pathways including reactive oxygen and nitrogen species as well as cell cycle disruption. Studies have shown CAP treatment can decrease mouse model glioblastoma multiforme tumor volume by 56%, increase life span by 60%, and maintain up to 85% viability of normal cells. Emerging evidence suggests that CAP is a viable in-vivo treatment for a number of tumors, including glioblastoma, as it appears to selectively induce tumor cell death while noncancerous cells remain viable.

  3. Treatment of Bone Waste Using Thermal Plasma Technology

    Institute of Scientific and Technical Information of China (English)

    KI Ho Beom; KIM Woo Hyung; KIM Bong Soo; K00 Hyung Joon; LI Mingwei; CHAE Jae Ou

    2007-01-01

    Daily meat consumption produces a lot of bone waste, and dumped bone waste without treatment would result in environmental hazards. Conventional treatment methods of waste bones have some disadvantages. Herein, an investigation of bone waste treated using thermal plasma technology is presented. A high-temperature plasma torch operated at 25.2 kW was used to treat bone waste for seven minutes. The bone waste was finally changed into vitric matter and lost 2/3 of its weight after the treatment. The process was highly efficient, economical, convenient, and fuel-free. This method could be used as an alternative for disposal of bone waste, small infectious animals, hazardous hospital waste, etc.

  4. Platelet rich plasma treatment for chronic Achilles tendinosis.

    Science.gov (United States)

    Monto, Raymond Rocco

    2012-05-01

    Chronic Achilles tendinosis is a relatively common but difficult orthopedic condition to treat. In this study, autologous platelet rich plasma (PRP), a concentrated bioactive blood component rich in cytokines and growth factors, was evaluated to determine its potential long-term efficacy in treating chronic cases of Achilles tendinosis resistant to traditional nonoperative management. Thirty patients with chronic Achilles tendinosis who did not respond to a minimum of 6 months of traditional nonoperative treatment modalities were treated with a single ultrasound guided injection of PRP. AOFAS scoring was completed for all patients pretreatment and at 0, 1, 2, 3, 6, 12, and 24 months post-treatment. MRI and/or ultrasound studies were completed for all patients pre-treatment and at 6 months post-treatment. Prior to the PRP treatment all of the patients in this study were considering surgical Achilles repair for their severe symptoms. The average AOFAS score increased from 34 (range, 20 to 60) to 92 (range, 87 to 100) by 3 months after PRP treatment and remained elevated at 88 (range, 76 to 100) at 24 months post-treatment. Pretreatment imaging abnormalities present in the Achilles tendon on MRI and ultrasound studies resolved in 27 of 29 patients at 6 months post-treatment. Clinical success was achieved in 28 of 30 patients. Platelet-rich plasma was used effectively to treat chronic recalcitrant cases of Achilles tendinosis.

  5. Effect of two days treatment with orlistat on plasma leptin in obese patients without weight loss

    Directory of Open Access Journals (Sweden)

    Ana Rodríguez-Valle

    Full Text Available Objective: Little is known about the impact of orlistat on the leptin system. We studied the plasma leptin and satiety sensation response for two days of orlistat treatment without hypocaloric diet and weight loss. Material and methods: Twenty obese female subjects were recruited from our medical outpatient clinics. All of these subjects had previously received advice on dietary restriction and lifestyle modification, but remained obese with a stable body weight for at least six months before recruitment for the study. Results: Subjects were given 120 mg orlistat 3 times daily and were asked to maintain their usual diet. At baseline and two days after the treatment with orlistat, physical examination, hunger and blood analysis were repeated. There were no significant differences observed regarding energy dietary intake, body weight and waist-hip ratio, or in plasma glucose, insulin c-peptide concentrations. Only plasma leptin and triglycerides concentrations decreased (p: 0.0001 and 0.01 respectively. Decrease in plasma leptin concentration was positively correlated with changes observed in plasma triglycerides concentration (p: 0.01, r2: 0.45. Pre-dinner hunger increased and was negatively correlated with decrease in leptin (p: 0.0001, r2: 0.74 and triglycerides (p: 0.02, r2: 0.59. Conclusion: These data suggest that the partial fat malabsorption induced by the treatment with orlistat quickly reduces plasma triglycerides and leptin. This decrease is associated with increased appetite before intake following the main meal of the day.

  6. Non-thermal plasma treatment of hydrogen sulfide

    Energy Technology Data Exchange (ETDEWEB)

    Frost, L.J.; Hartvigsen, J.; Elangovan, S. [Ceramatec Inc., Salt Lake City, UT (United States)

    2009-07-01

    This paper described a non-thermal plasma reforming process to treat hydrogen sulfide (H{sub 2}S) in heavy hydrocarbons. H{sub 2}S is present in natural gas, petroleum, and various process gases. It is an unwanted compound that is generally removed using an amine extraction process followed by a Claus process. Ceramatec Inc. has developed a GlidArc plasma reformer to recover some of the hydrogen from the H{sub 2}S. Non-thermal plasma reforming breaks hydrogen sulfide into hydrogen and elemental sulphur. Ceramatec has established the catalytic nature of the non-thermal plasma generated by its GlidArc plasma reformer. This treatment process is still in the laboratory stage, but it offers the possibility of a new method to treat acid gas that will provide an opportunity to recover hydrogen that is currently burned to water during the Claus sulphur removal process. Ceramatec, in conjunction with Albin Czernichowski of ECP in France, has demonstrated the ability to reform a variety of hydrocarbons using the non-thermal plasma catalyzed reaction. The plasma reaction can be initiated in either a partial oxidation or steam reforming mode. Multiple hydrocarbons can be processed by the same unit with only control parameters changing to meet the requirements of the individual hydrocarbons being processed. Although a tested unit did not accomplish complete conversion, some additional options will be tested that are expected to increase the conversion under an existing program operated by the United States Department of Energy. 4 refs., 9 figs.

  7. Atmospheric pressure plasma jet treatment of Salmonella Enteritidis inoculated eggshells.

    Science.gov (United States)

    Moritz, Maike; Wiacek, Claudia; Koethe, Martin; Braun, Peggy G

    2017-03-20

    Contamination of eggshells with Salmonella Enteritidis remains a food safety concern. In many cases human salmonellosis within the EU can be traced back to raw or undercooked eggs and egg products. Atmospheric pressure plasma is a novel decontamination method that can reduce a wide range of pathogens. The aim of this work was to evaluate the possibility of using an effective short time cold plasma treatment to inactivate Salmonella Enteritidis on the eggshell. Therefore, artificially contaminated eggshells were treated with an atmospheric pressure plasma jet under different experimental settings with various exposure times (15-300s), distances from the plasma jet nozzle to the eggshell surface (5, 8 or 12mm), feed gas compositions (Ar, Ar with 0.2, 0.5 or 1.0% O2), gas flow rates (5 and 7slm) and different inoculations of Salmonella Enteritidis (10(1)-10(6)CFU/cm(2)). Atmospheric pressure plasma could reduce Salmonella Enteritidis on eggshells significantly. Reduction factors ranged between 0.22 and 2.27 log CFU (colony-forming units). Exposure time and, particularly at 10(4)CFU/cm(2) inoculation, feed gas had a major impact on Salmonella reduction. Precisely, longer exposure times led to higher reductions and Ar as feed gas was more effective than ArO2 mixtures.

  8. Modifications in SnS thin films by plasma treatments

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, H., E-mail: hm@fis.unam.mx [Instituto de Ciencias Fisicas, Universidad Nacional Autonoma de Mexico, Apartado Postal 48-3, 62210 Cuernavaca, Morelos (Mexico); Avellaneda, D. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon (Mexico)

    2012-02-01

    The present study shows the modifications of structural, optical and electrical characteristics that occur in tin sulfide (SnS) thin films treated in air and in nitrogen plasma at different pressure conditions. The films were obtained by the chemical bath deposition method, which results in SnS thin films with an orthorhombic crystalline structure, band gap (E{sub g}) of 1.1-1.2 eV, and electrical conductivities ({sigma}) in the order of 10{sup -6} {Omega}{sup -1}cm{sup -1}. The films treated with air plasma at pressures between 1 and 4 Torr, showed the presence of SnS{sub 2}, Sn{sub 2}S{sub 3}, and SnO{sub 2} phases, within the band gap values ranging from 0.9 to 1.5 eV. On the other hand, the films treated with nitrogen plasma presented the same phases, but showed a significant modification in the electrical conductivity, increasing from 10{sup -6} {Omega}{sup -1}cm{sup -1} (as-deposited) up to 10{sup -2}-10{sup -3} {Omega}{sup -1}cm{sup -1} (plasma treated). This result is a suitable range of conductivity for the improvement of the solar cells with SnS as an absorber material. Also, emission spectroscopy measurements were carried out in both air and nitrogen plasma treatments.

  9. Post-treatment of Plasma-Sprayed Amorphous Ceramic Coatings by Spark Plasma Sintering

    Science.gov (United States)

    Chraska, T.; Pala, Z.; Mušálek, R.; Medřický, J.; Vilémová, M.

    2015-04-01

    Alumina-zirconia ceramic material has been plasma sprayed using a water-stabilized plasma torch to produce free standing coatings. The as-sprayed coatings have very low porosity and are mostly amorphous. The amorphous material crystallizes at temperatures above 900 °C. A spark plasma sintering apparatus has been used to heat the as-sprayed samples to temperatures above 900 °C to induce crystallization, while at the same time, a uniaxial pressure of 80 MPa has been applied to their surface. After such post-treatment, the ceramic samples are crystalline and have very low open porosity. The post-treated material exhibits high hardness and significantly increased flexural strength. The post-treated samples have a microstructure that is best described as nanocomposite with the very small crystallites embedded in an amorphous matrix.

  10. [Platelet-rich plasma in knee osteoarthritis treatment].

    Science.gov (United States)

    Simental-Mendía, Mario Alberto; Vílchez-Cavazos, José Félix; Martínez-Rodríguez, Herminia Guadalupe

    2015-01-01

    The biological changes that commonly cause degenerative articular cartilage injuries in the knee are primarily associated to misalignment of the joint and metabolic changes related to age, as occurs in osteoarthritis. Furthermore, the capacity for cartilage self-regeneration is quite limited due to the lack of vascularity of the tissue. To date there is no ideal treatment capable to stimulate cartilage regeneration; thus there is a need to seek alternative therapies for the treatment of such conditions. The number of publications demonstrating the therapeutic and regenerative benefits of using platelet-rich plasma as a treatment for knee osteoarthritis has been increasing in recent years. In spite of encouraging results, there are still only a few randomised control studies with strong clinical evidence, lacking clarity on points such as the optimum formulation or the mechanism of action of platelet-rich plasma. Up to this point and based on the results of clinical studies, not all patients can benefit from this therapy. It is important to consider aspects such as the age and grade of cartilage degeneration. The aim of the present paper is to review the recent scientific literature on the treatment of knee osteoarthritis with platelet-rich plasma, and the biological bases of this therapy, as well as presenting the current opinion on this subject.

  11. Architecture of WEST plasma control system

    Energy Technology Data Exchange (ETDEWEB)

    Ravenel, N., E-mail: nathalie.ravenel@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Nouailletas, R.; Barana, O.; Brémond, S.; Moreau, P.; Guillerminet, B.; Balme, S.; Allegretti, L. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Mannori, S. [ENEA C.R. Brasimone (Italy)

    2014-05-15

    To operate advanced plasma scenario (long pulse with high stored energy) in present and future tokamak devices under safe operation conditions, the control requirements of the plasma control system (PCS) leads to the development of advanced feedback control and real time handling exceptions. To develop these controllers and these exceptions handling strategies, a project aiming at setting up a flight simulator has started at CEA in 2009. Now, the new WEST (W Environment in Steady-state Tokamak) project deals with modifying Tore Supra into an ITER-like divertor tokamak. This upgrade impacts a lot of systems including Tore Supra PCS and is the opportunity to improve the current PCS architecture to implement the previous works and to fulfill the needs of modern tokamak operation. This paper is dealing with the description of the architecture of WEST PCS. Firstly, the requirements will be presented including the needs of new concepts (segments configuration, alternative (or backup) scenario, …). Then, the conceptual design of the PCS will be described including the main components and their functions. The third part will be dedicated to the proposal RT framework and to the technologies that we have to implement to reach the requirements.

  12. Imaging System and Plasma Imaging on HL-2A Tokamak

    Institute of Scientific and Technical Information of China (English)

    郑银甲; 冯震; 罗萃文; 刘莉; 李伟; 严龙文; 杨青巍; 刘永

    2004-01-01

    As a new diagnostic means, plasma-imaging system has been developed on the HL2A tokamak, with a basic understanding of plasma discharge scenario of the entire torus, checking the plasma position and the clearance between the plasma and the first wall during discharge. The plasma imaging system consists of (1) color video camera, (2) observation window and turn mirror,(3) viewing & collecting optics, (4) video cable, (5) Video capture card as well as PC. This paper mainly describes the experimental arrangement, plasma imaging system and detailed part in the system, along with the experimental results. Real-time monitoring of plasma discharge process,particularly distinguishing limitor and divertor configuration, the imaging system has become key diagnostic means and laid the foundation for further physical experiment on the HL-2A tokamak.

  13. Polymerization monitoring in plasma etching systems

    Science.gov (United States)

    Kim, Jinsoo

    1999-11-01

    -suppressing nature of the oxide etch. A new sensor for monitoring polymer buildup in plasma etching systems was designed, fabricated, and tested as part of this work. The device is mounted flush in the chamber wall and uses an electrothermal oscillator to measure the thermal mass change of a micromachined dielectric window as polymer deposits on it. The variation in the oscillation pulse width (cooling time) is used as the sensor output. The device operates with a typical cooling time of 2.7msec and has a thickness resolution of modified to add the needed micromachining steps, and photoresist masking was explored for the first time to protect the devices from silicon etchant (tetramethyl ammonium hydroxide: TMAH) attack. A chevron-based support structure is used on the back side of the wafer to hold the devices in wafer form after micromachining to allow testing, high-yield die separation, and non-lithographic post-TMAH processing. The device metallization, package, and O-ring-based placement structure have been designed to ensure compatibility with the plasma etching environment.

  14. NOx reduction by ozone injection and direct plasma treatment

    DEFF Research Database (Denmark)

    Stamate, Eugen; Salewski, Mirko

    2012-01-01

    NOx reduction by ozone injection and direct plasma treatment is investigated for different process parameters in a 6 m long serpentine reactor. Several aspects including the role of mixing scheme, water vapours, steep temperature gradient and time dependet NOx levels are taken into consideration....... The process chemistry is monitored by FTIR, chemiluminiscence and absorbtion spectroscopy. The kinetic mechanism is also investigated in 3D simulations....

  15. Hydrogen sulfide waste treatment by microwave plasma-chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Harkness, J.B.L.; Doctor, R.D.

    1994-03-01

    A waste-treatment process that recovers both hydrogen and sulfur from industrial acid-gas waste streams is being developed to replace the Claus technology, which recovers only sulfur. The proposed process is derived from research reported in the Soviet technical literature and uses microwave (or radio-frequency) energy to initiate plasma-chemical reactions that dissociate hydrogen sulfide into elemental hydrogen and sulfur. This process has several advantages over the current Claus-plus-tail-gas-cleanup technology, which burns the hydrogen to water. The primary advantage of the proposal process is its potential for recovering and recycling hydrogen more cheaply than the direct production of hydrogen. Since unconverted hydrogen sulfide is recycled to the plasma reactor, the plasma-chemical process has the potential for sulfur recoveries in excess of 99% without the additional complexity of the tail-gas-cleanup processes associated with the Claus technology. There may also be some environmental advantages to the plasma-chemical process, because the process purge stream would primarily be the carbon dioxide and water contained in the acid-gas waste stream. Laboratory experiments with pure hydrogen sulfide have demonstrated the ability of the process to operate at or above atmospheric pressure with an acceptable hydrogen sulfide dissociation energy. Experiments with a wide range of acid-gas compositions have demonstrated that carbon dioxide and water are compatible with the plasma-chemical dissociation process and that they do not appear to create new waste-treatment problems. However, carbon dioxide does have negative impacts on the overall process. First, it decreases the hydrogen production, and second, it increases the hydrogen sulfide dissociation energy.

  16. Investigation of sewage sludge treatment using air plasma assisted gasification.

    Science.gov (United States)

    Striūgas, Nerijus; Valinčius, Vitas; Pedišius, Nerijus; Poškas, Robertas; Zakarauskas, Kęstutis

    2017-06-01

    This study presents an experimental investigation of downdraft gasification process coupled with a secondary thermal plasma reactor in order to perform experimental investigations of sewage sludge gasification, and compare process parameters running the system with and without the secondary thermal plasma reactor. The experimental investigation were performed with non-pelletized mixture of dried sewage sludge and wood pellets. To estimate the process performance, the composition of the producer gas, tars, particle matter, producer gas and char yield were measured at the exit of the gasification and plasma reactor. The research revealed the distribution of selected metals and chlorine in the process products and examined a possible formation of hexachlorobenzene. It determined that the plasma assisted processing of gaseous products changes the composition of the tars and the producer gas, mostly by destruction of hydrocarbon species, such as methane, acetylene, ethane or propane. Plasma processing of the producer gas reduces their calorific value but increases the gas yield and the total produced energy amount. The presented technology demonstrated capability both for applying to reduce the accumulation of the sewage sludge and production of substitute gas for drying of sewage sludge and electrical power. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Controlling plasma stimulated media in cancer treatment application

    Science.gov (United States)

    Yan, Dayun; Sherman, Jonathan H.; Cheng, Xiaoqian; Ratovitski, Edward; Canady, Jerome; Keidar, Michael

    2014-12-01

    Cold atmospheric plasma (CAP) constitutes a "cocktail" of various reactive species. Accumulating evidence shows the effectiveness of CAP in killing cancer cells and decreasing the tumor size, which provides a solid basis for its potential use in cancer treatment. Currently, CAP is mainly used to directly treat cancer cells and trigger the death of cancer cells via apoptosis or necrosis. By altering the concentration of fetal bovine serum in Dulbecco's modified Eagle's medium and the temperature to store CAP stimulated media, we demonstrated controllable strategies to harness the stimulated media to kill glioblastoma cells in vitro. This study demonstrated the significant role of media in killing cancer cells via the CAP treatment.

  18. On the attractive plasma-charge system in 2-d

    CERN Document Server

    Caprino, Silvia; Miot, Evelyne; Pulvirenti, Mario

    2011-01-01

    We study a positively charged Vlasov-Poisson plasma in which N negative point charges are immersed. The attractiveness of the system forces us to consider a possibly unbounded plasma density near the charges. We prove the existence of a global in time solution, assuming a suitable initial distribution of the velocities of the plasma particles. Uniqueness remains unsolved.

  19. Collisionless relaxation in beam-plasma systems

    Energy Technology Data Exchange (ETDEWEB)

    Backhaus, Ekaterina Yu. [Univ. of California, Berkeley, CA (United States)

    2001-01-01

    This thesis reports the results from the theoretical investigations, both numerical and analytical, of collisionless relaxation phenomena in beam-plasma systems. Many results of this work can also be applied to other lossless systems of plasma physics, beam physics and astrophysics. Different aspects of the physics of collisionless relaxation and its modeling are addressed. A new theoretical framework, named Coupled Moment Equations (CME), is derived and used in numerical and analytical studies of the relaxation of second order moments such as beam size and emittance oscillations. This technique extends the well-known envelope equation formalism, and it can be applied to general systems with nonlinear forces. It is based on a systematic moment expansion of the Vlasov equation. In contrast to the envelope equation, which is derived assuming constant rms beam emittance, the CME model allows the emittance to vary through coupling to higher order moments. The CME model is implemented in slab geometry in the absence of return currents. The CME simulation yields rms beam sizes, velocity spreads and emittances that are in good agreement with particle-in-cell (PIC) simulations for a wide range of system parameters. The mechanism of relaxation is also considered within the framework of the CME system. It is discovered that the rapid relaxation or beam size oscillations can be attributed to a resonant coupling between different modes of the system. A simple analytical estimate of the relaxation time is developed. The final state of the system reached after the relaxation is complete is investigated. New and accurate analytical results for the second order moments in the phase-mixed state are obtained. Unlike previous results, these connect the final values of the second order moments with the initial beam mismatch. These analytical estimates are in good agreement with the CME model and PIC simulations. Predictions for the final density and temperature are developed that show

  20. The plasma footprint of an atmospheric pressure plasma jet on a flat polymer substrate and its relation to surface treatment

    Science.gov (United States)

    Onyshchenko, Iuliia; Nikiforov, Anton Yu.; De Geyter, Nathalie; Morent, Rino

    2016-08-01

    The aim of this work is to show the correlation between the plasma propagation in the footprint of an atmospheric pressure plasma jet on a flat polymer surface and the plasma treatment impact on the polymer properties. An argon plasma jet working in open air is used as plasma source, while PET thin films are used a substrates for plasma treatment. Light emission photographs are taken with an ICCD camera to have a close look at the generated structures in the plasma jet footprint on the surface. Water contact angle (WCA) measurement and X-ray photoelectron spectroscopy (XPS) analysis are also performed to obtain information about the impact of the plasma treatment on the PET surface characteristics. A variation in ICCD camera gate duration (1 µs, 100 µs, 50 ms) results in the photographs of the different plasma structures occurring during the plasma propagation on the flat PET surface. Contact angle measurements provide results on improvement of the PET hydrophilic character, while XPS analysis shows the distribution of atomic elements on the treated substrate surface. Light emission images help explaining the obtained WCA and XPS results. Contribution to the topical issue "6th Central European Symposium on Plasma Chemistry (CESPC-6)", edited by Nicolas Gherardi, Ester Marotta and Cristina Paradisi

  1. Pattern Formation in a Dusty Plasma System

    Institute of Scientific and Technical Information of China (English)

    黄峰; 叶茂福; 王龙; 江南

    2004-01-01

    A rich variety of dust patterns have been observed in a capacitively coupled rf discharge dusty plasma system. Dust particles are synthesized through chemical reaction of the filled gas mixture during discharge. Different patterns are formed in different stages of particle growth. In the early stage of particle growth, dust cloud can be formed by a large number of small particles, and its behavior appears to be fluid-like. Such interesting nonlinear phenomena as dust void and complex dust cloud patterns are observed in this stage. As dust particles grow, the particle size and structure can be controlled to follow two different routes. In one of the routes, the particles grow up in a ball-like shape and can be formed into regular lattice and cluster patterns.In the other, the particles grow up in a fractal shape.

  2. Study of Ag and PE interface after plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Mackova, A.; Malinsky, P. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, 250 68 Rez (Czech Republic); Department of Physics, Faculty of Science, J.E. Purkinje University, Ceske mladeze 8, 400 96 Usti nad Labem (Czech Republic); Bocan, J. [Nuclear Physics Institute, Academy of Sciences of the Czech Republic, 250 68 Rez (Czech Republic); Department of Physics, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Brehova 7, 11519 Praha 1 (Czech Republic); Svorcik, V. [Department of Solid State Engineering, Institute of Chemical Technology, Technicka 5, 166 28 Prague (Czech Republic); Pavlik, J.; Stryhal, Z. [Department of Physics, Faculty of Science, J.E. Purkinje University, Ceske mladeze 8, 400 96 Usti nad Labem (Czech Republic); Sajdl, P. [Department of Inorganic Chemistry, Institute of Chemical Technology, Technicka 5,166 28 Prague (Czech Republic)

    2008-07-01

    In this study, the effect of simultaneous plasma treatment and thermal annealing on the diffusion of Ag in low and high-density polyethylene (LDPE and HDPE) and on intermixing at the metal/polymer interface is examined. Metal layers were deposited onto 50 {mu}m thick LDPE and HDPE foils using diode sputtering. Concentration profiles of Ag were determined by Rutherford backscattering spectrometry (RBS). Ag diffusion coefficients in LDPE and HDPE were extracted from measured Ag depth profiles. Diffusion coefficients 5.05 x 10{sup -14}-6.78 x 10{sup -14} cm{sup 2}.s{sup -1} and 2.44 x 10{sup -14}-4.66 x 10{sup -14} cm{sup 2}.s{sup -1} were found for Ag in HDPE and Ag in LDPE, respectively. Morphology changes after the plasma treatment were determined using atomic force microscopy (AFM) and from RBS measurements as well. Surface fraction of Ag and plasma induced surface chemistry modification was investigated using XPS analysis. The signal of Ag bonded on polymer structure was identified and degradation of polymer substrate was observed in XPS spectra. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  3. Nitrogen oxides and methane treatment by non-thermal plasma

    Science.gov (United States)

    Alva, E.; Pacheco, M.; Colín, A.; Sánchez, V.; Pacheco, J.; Valdivia, R.; Soria, G.

    2015-03-01

    Non thermal plasma was used to treat nitrogen oxides (NOx) and methane (CH4), since they are important constituents of hydrocarbon combustion emissions processes and, both gases, play a key role in the formation of tropospheric ozone. These gases are involved in environmental problems like acid rain and some diseases such as bronchitis and pneumonia. In the case of methane is widely known its importance in the global climate change, and currently accounts for 30% of global warming. There is a growing concern for methane leaks, associated with a rapid expansion of unconventional oil and gas extraction techniques as well as a large-scale methane release from Arctic because of ice melting and the subsequent methane production of decaying organic matter. Therefore, methane mitigation is a key to avoid dangerous levels of global warming. The research, here reported, deals about the generation of non-thermal plasma with a double dielectric barrier (2DBD) at atmospheric pressure with alternating current (AC) for NOx and CH4 treatment. The degradation efficiencies and their respective power consumption for different reactor configurations (cylindrical and planar) are also reported. Qualitative and quantitative analysis of gases degradation are reported before and after treatment with cold plasma. Experimental and theoretical results are compared obtaining good removal efficiencies, superior to 90% and to 20% respectively for NOx and CH4.

  4. Treatment and recycling of incinerated ash using thermal plasma technology.

    Science.gov (United States)

    Cheng, T W; Chu, J P; Tzeng, C C; Chen, Y S

    2002-01-01

    To treat incinerated ash is an important issue in Taiwan. Incinerated ashes contain a considerable amount of hazardous materials such as dioxins and heavy metals. If these hazardous materials are improperly treated or disposed of, they shall cause detrimental secondary contamination. Thermal plasma vitrification is a robust technology to treat and recycle the ash residues. Under the high temperature plasma environment, incinerated ashes are vitrified into benign slag with large volume reduction and extreme detoxification. Several one-step heat treatment processes are carried out at four temperatures (i.e. 850, 950, 1,050 and 1,150 degrees C) to obtain various "microstructure materials". The major phase to form these materials is a solid solution of gehlenite (Ca2Al2SiO7) and åkermanite (Ca2MgSi2O7) belonging to the melilite group. The physical and mechanical properties of the microstructure materials are improved by using one-step post-heat treatment process after plasma vitrification. These microstructure materials with good quality have great potential to serve as a viable alternative for construction applications.

  5. Immobilization of enzyme and antibody on ALD-HfO2-EIS structure by NH3 plasma treatment

    Science.gov (United States)

    Wang, I.-Shun; Lin, Yi-Ting; Huang, Chi-Hsien; Lu, Tseng-Fu; Lue, Cheng-En; Yang, Polung; Pijanswska, Dorota G.; Yang, Chia-Ming; Wang, Jer-Chyi; Yu, Jau-Song; Chang, Yu-Sun; Chou, Chien; Lai, Chao-Sung

    2012-03-01

    Thin hafnium oxide layers deposited by an atomic layer deposition system were investigated as the sensing membrane of the electrolyte-insulator-semiconductor structure. Moreover, a post-remote NH3 plasma treatment was proposed to replace the complicated silanization procedure for enzyme immobilization. Compared to conventional methods using chemical procedures, remote NH3 plasma treatment reduces the processing steps and time. The results exhibited that urea and antigen can be successfully detected, which indicated that the immobilization process is correct.

  6. Study on hydrophilicity of polymer surfaces improved by plasma treatment

    Science.gov (United States)

    Lai, Jiangnan; Sunderland, Bob; Xue, Jianming; Yan, Sha; Zhao, Weijiang; Folkard, Melvyn; Michael, Barry D.; Wang, Yugang

    2006-03-01

    Surface properties of polycarbonate (PC), polypropylene (PP), polyethylene terephthalate (PET) samples treated by microwave-induced argon plasma have been studied with contact angle measurement, X-ray photoelectron spectroscopy (XPS) and scanned electron microscopy (SEM). It is found that plasma treatment modified the surfaces both in composition and roughness. Modification of composition makes polymer surfaces tend to be highly hydrophilic, which mainly depended on the increase of ratio of oxygen-containing group as same as other papers reported. And this experiment further revealed that C dbnd O bond is the key factor to the improvement of the hydrophilicity of polymer surfaces. Our SEM observation on PET shown that the roughness of the surface has also been improved in micron scale and it has influence on the surface hydrophilicity.

  7. Study on hydrophilicity of polymer surfaces improved by plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Lai Jiangnan [Key Laboratory of Heavy Ion Physics, Peking University, MOE, Beijing (China); Sunderland, Bob [Gray Cancer Institute, Mount Vernon Hospital, Northwood, Middlesex (United Kingdom); Xue Jianming [Key Laboratory of Heavy Ion Physics, Peking University, MOE, Beijing (China); Yan, Sha [Key Laboratory of Heavy Ion Physics, Peking University, MOE, Beijing (China); Zhao Weijiang [Key Laboratory of Heavy Ion Physics, Peking University, MOE, Beijing (China); Folkard, Melvyn [Gray Cancer Institute, Mount Vernon Hospital, Northwood, Middlesex (United Kingdom); Michael, Barry D. [Gray Cancer Institute, Mount Vernon Hospital, Northwood, Middlesex (United Kingdom); Wang Yugang [Key Laboratory of Heavy Ion Physics, Peking University, MOE, Beijing (China)]. E-mail: ygwang@pku.edu.cn

    2006-03-15

    Surface properties of polycarbonate (PC), polypropylene (PP), polyethylene terephthalate (PET) samples treated by microwave-induced argon plasma have been studied with contact angle measurement, X-ray photoelectron spectroscopy (XPS) and scanned electron microscopy (SEM). It is found that plasma treatment modified the surfaces both in composition and roughness. Modification of composition makes polymer surfaces tend to be highly hydrophilic, which mainly depended on the increase of ratio of oxygen-containing group as same as other papers reported. And this experiment further revealed that C=O bond is Key factor to the improvement of the hydrophilicity of polymer surfaces. Our SEM observation on PET shown that the roughness of the surface has also been improved in micron scale and it has influence on the surface hydrophilicity.

  8. Controlled trial of plasma exchange in treatment of Raynaud's syndrome.

    Science.gov (United States)

    O'Reilly, M J; Talpos, G; Roberts, V C; White, J M; Cotton, L T

    1979-01-01

    Twenty-seven patients with Raynaud's syndrome had their digital vessel patency assessed by Doppler ultrasound after different thermal stresses. Digital vessel patency rates differed significantly after stresses at 15 degrees C and 45 degrees C. In a randomised controlled trial placebo and heparin had no effect either on patients' symptoms or on the patency of their digital vessels. Plasma exchange improved both symptoms and vessel patency rates at 15 degrees C and 21 degrees C. Improvement in seven out of eight of these patients has been maintained for six months. Assessing digital vessel patency by Doppler techniques allow continuous, atraumatic, and safe evaluation of the effects of different methods of treatment on the patency of the digital vessels and has helped to indicate that plasma exchange is a useful adjunct in the management of patients with severe Raynaud's syndrome. PMID:376042

  9. ELECTROLYTIC-PLASMA TREATMENT OF INNER SURFACE OF TUBULAR PRODUCTS

    Directory of Open Access Journals (Sweden)

    Yu. G. Alekseev

    2016-01-01

    Full Text Available While manufacturing a number of important tubular products stringent requirements have been imposed on quality of their inner surfaces. The well-known methods for inner surface treatment of pipes include sandblasting, chemical cleaning with acid reagents (oxalic, formic, sulfamic, orthophosphoric acids and electrochemical polishing. Disadvantages of the chemical method are cleaning-up irregularities, high metal removal, limited number of reagent application, complicated selection of reagent chemical composition and concentration, complicated and environmentally harmful recycling of waste chemicals, high cost of reagents. Low productivity at a high cost, as well as hazardous impact on personnel due to high dispersion of abrasive dust are considered as disadvantages of sandblasting. Electrochemical polishing is characterized by the following disadvantages: low processing productivity because supply of high currents is rather difficult due to electrolyte scattering capacity away from the main electrode action zone, limited length of the cavity to be treated due to heating of flexible current leads at operating current densities, application of expensive aggressive electrolytes and high costs of their recycling. A new method for polishing and cleaning of inner surfaces of tubular products based on electrolyte-plasma treatment has been developed. In comparison with the existing methods the proposed methods ensures quality processing with high intensity while applying non-toxic, environmentally friendly and cheap electrolytes. The paper presents results of investigations on technological specific features of electrolyte-plasma treatment for inner surfaces of tubular products: influence of slotted nozzle width, electrolyte flow and rate on stability of gas-vapor blanket, current density and productivity. Results of the research have made it possible to determine modes that provide stability and high productivity in the process of electrolyte-plasma

  10. Surface Treatment of PET Nonwovens with Atmospheric Plasma

    Science.gov (United States)

    Li, Shufang

    2013-01-01

    In this study, polyethylene-terephthalate (PET) nonwovens are treated using an atmospheric plasma and the effects of the treatment time, treatment power and discharge distance on the ability of water-penetration into the nonwovens are investigated. The result indicates that the method can improve the wettability of PET nonwovens remarkably, but the aging decay of the sample's wettability is found to be notable as a function of the storage time after treatment due to the internal rotation of the single bond of surface macromolecules. As shown by SEM and XPS analysis, the etching and surface reaction are significant, and water-penetration weight is found to increase remarkably with the increasing power. This variation can be attributed to momentum transfer and enhanced higher-energy particle excitation.

  11. Effect of air plasma treatment on the dyeing of Tencel fabric with C.I. Reactive Black 5

    Science.gov (United States)

    Zhang, L. S.; Liu, H. L.; Yu, W. D.

    2015-02-01

    The Tencel fabrics were treated by the atmospheric pressure plasma with air for different length of time and dyed with the C.I. Reactive Black 5 at 1%, 5% and 10% o.m.f. The effect of the prolonged plasma treatment time was characterized by both the weight loss and the whiteness index analyses, which implied that with the increase of the plasma treatment time, the treated fabrics were lighter and yellower than the untreated ones. The contact angle decreased dramatically from 139° to instantly spread. The results of SEM showed that, with the prolonged treatment time, more significant crater-like surface morphology on the fiber of Tencel samples was formed. Compared with untreated samples, the values of dye bath exhaustion and total fixation effect were higher. But they did not increase with the prolonged plasma treatment time. With the prolonged storage time after the plasma treatment, the result to ageing effect indicated that the values of dye bath exhaustion and total fixation effect reduced. The Integ values for characterizing the coloring effect were evaluated by the CIE system of color measurement. In most cases, the Integ values reached the highest ones when the plasma treatment time was 10 or 20 min. When the concentration of the dye bath was low (at 1% o.m.f.), the longer plasma treatment time was, the higher the Integ value was. However, if the fabrics after plasma treatment were stored for 21 days, the longer plasma treatment time did not cause the larger Integ value. When the concentration was 1%, the Integ value increased with the weight loss increasing, which was different from the values of fabrics with 5% and 10% concentration. If the dyeing concentration was low, the fixation had a more significant effect on the color fastness to wet rubbing; in contrast, if the dyeing concentration was high, the surface roughness had a more important effect on it.

  12. Effects of surface performance on bamboo by microwave plasma treatment

    Institute of Scientific and Technical Information of China (English)

    Guanben DU; Zhaobin SUN; Linrong HUANG

    2008-01-01

    Surface treatment of bamboo was carried out by microwave plasma (MWP), surface contact angle of the sample was measured using glycerin and urea-form-aldehyde resin (UFR) liquid, and the effects on the surface performance of the bamboo sample was evaluated. The results show that the surface contact angle of the sample presented a generally decreasing trend when prolonging the MWP treatment time and shortening the distance between the sample and the resonance cavity. The surface contact angle of the sample decreased by 49%-59% under the following conditions: MWP treatment for 30 s, the distance between the sample and resonance cavity at 40 mm, and measurement at 15 s after dripping with gly-cerin. The surface contact angle of the sample measured with the glycerin was lower than that with UFR. No mat-ter whether we used glycerin or UFR, the contact angle of the sample at 15 s after dripping was lower than that at 5 s after dripping. The grinding treatment had little effect on the surface contact angle of the sample after MWP treat-ment, and the modification effect of MWP treatment after grinding was better than that of sole MWP treatment.

  13. Electron cyclotron resonance breakdown studies in a linear plasma system

    Indian Academy of Sciences (India)

    Vipin K Yadav; K Sathyanarayana; D Bora

    2008-03-01

    Electron cyclotron resonance (ECR) plasma breakdown is studied in a small linear cylindrical system with four different gases - hydrogen, helium, argon and nitrogen. Microwave power in the experimental system is delivered by a magnetron at 2.45 ± 0.02 GHz in TE10 mode and launched radially to have extra-ordinary (X) wave in plasma. The axial magnetic field required for ECR in the system is such that the fundamental ECR surface ( = 875.0 G) resides at the geometrical centre of the plasma system. ECR breakdown parameters such as plasma delay time and plasma decay time from plasma density measurements are carried out at the centre using a Langmuir probe. The operating parameters such as working gas pressure (1 × 10-5 -1 × 10-2 mbar) and input microwave power (160{800 W) are varied and the corresponding effect on the breakdown parameters is studied. The experimental results obtained are presented in this paper.

  14. Monitoring system for thermal plasma; Sistema de monitoreo para plasma termico

    Energy Technology Data Exchange (ETDEWEB)

    Romero G, M.; Vilchis P, A.E. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1999-07-01

    In the Thermal plasma applications laboratory it has been the degradation project of oils for isolation in transformers. These are a very hazardous residues and at this time in the country they are stored in metal barrels. It has been the intention to undergo the oils to plasma for degradate them to non-hazardous residues. The system behavior must be monitored to establish the thermal plasma behavior. (Author)

  15. Microwave Plasma System: PVA Tepla 300

    Data.gov (United States)

    Federal Laboratory Consortium — Description: CORAL Name: Microwave Asher A tool using microwave oxygen plasma to remove organics on the surfaces Specifications / Capabilities: Frequency: 2.45 GHz...

  16. Plasma distribution of cathodic ARC deposition system

    Energy Technology Data Exchange (ETDEWEB)

    Anders, S.; Raoux, S.; Krishnan, K.; MacGill, R.A.; Brown, I.G. [Lawrence Berkeley National Lab., CA (United States)

    1996-08-01

    The plasma distribution using a cathodic arc plasma source with and without magnetic macroparticle filter has been determined by depositing on a transparent plastic substrate and measuring the film absorption. It was found that the width of the distribution depends on the arc current, and it also depends on the cathode material which leads to a spatial separation of the elements when an alloy cathode is used. By applying a magnetic multicusp field near the exit of the magnetic filter, it was possible to modify the plasma distribution and obtain a flat plasma profile with a constant and homogeneous elemental distribution.

  17. Biofeedback systems and adaptive control hemodialysis treatment

    Directory of Open Access Journals (Sweden)

    Azar Ahmad

    2008-01-01

    Full Text Available On-line monitoring devices to control functions such as volume, body temperature, and ultrafiltration, were considered more toys than real tools for routine clinical application. However, bio-feedback blood volume controlled hemodialysis (HD is now possible in routine dialysis, allowing the delivery of a more physiologically acceptable treatment. This system has proved to reduce the incidence of intra-HD hypotension episodes significantly. Ionic dialysance and the patient′s plasma conductivity can be calculated easily from on-line measurements at two different steps of dialysate conductivity. A bio-feedback system has been devised to calculate the patient′s plasma conductivity and modulate the conductivity of the dialysate continuously in order to achieve a desired end-dialysis patient plasma conductivity corresponding to a desired end-dialysis plasma sodium concentration. Another bio-feedback system can control the body tempe-rature by measuring it at the arterial and venous lines of the extra-corporeal circuit, and then modulating the dialysate temperature in order to stabilize the patients′ temperature at constant values that result in improved intra-HD cardiovascular stability. The module can also be used to quantify vascular access recirculation. Finally, the simultaneous computer control of ultrafiltration has proven the most effective means for automatic blood pressure stabilization during hemo-dialysis treatment. The application of fuzzy logic in the blood-pressure-guided biofeedback con-trol of ultrafiltration during hemodialysis is able to minimize HD-induced hypotension. In con-clusion, online monitoring and adaptive control of the patient during the dialysis session using the bio-feedback systems is expected to render the process of renal replacement therapy more physiological and less eventful.

  18. Successful treatment of ligneous conjunctivitis with topical fresh frozen plasma in an infant

    Directory of Open Access Journals (Sweden)

    Zuhal Özen Tunay

    2015-10-01

    Full Text Available ABSTRACTA 6-month-old female infant presented to our clinic with bilateral eyelid swelling, yellowish-white membranes under both lids, and mucoid ocular discharge. Her aunt had similar ocular problems that were undiagnosed. The conjunctival membranes were excised and histopathological investigation of these membranes showed ligneous conjunctivitis. Further, laboratory examination revealed plasminogen deficiency. A good response was observed to topical fresh frozen plasma (FFP treatment without systemic therapy, and the membranes did not recur during the treatment. Topical FFP treatment may facilitate rapid rehabilitation and prevent recurrence in patients with ligneous conjunctivitis.

  19. Successful treatment of ligneous conjunctivitis with topical fresh frozen plasma in an infant.

    Science.gov (United States)

    Tunay, Zuhal Özen; Özdemir, Özdemir; Acar, Damla; Gül, Ece; Akbay, Serap

    2015-01-01

    A 6-month-old female infant presented to our clinic with bilateral eyelid swelling, yellowish-white membranes under both lids, and mucoid ocular discharge. Her aunt had similar ocular problems that were undiagnosed. The conjunctival membranes were excised and histopathological investigation of these membranes showed ligneous conjunctivitis. Further, laboratory examination revealed plasminogen deficiency. A good response was observed to topical fresh frozen plasma (FFP) treatment without systemic therapy, and the membranes did not recur during the treatment. Topical FFP treatment may facilitate rapid rehabilitation and prevent recurrence in patients with ligneous conjunctivitis.

  20. THE EFFECT OF PLASMA TREATMENT OVER THE ADHESION PROPERTY OF POLYAMİDE 6 FABRICS

    OpenAIRE

    ÖZDOĞAN, Esen

    2006-01-01

    The effect of plasma treatment on the surface characteristics of polyamide fabrics was investigated. Plasma surface modifications with carbon dioxide and argon were performed on the polyamide 6 fabrics to improve the adhesion and hidrophylity. The surface morphology of the fiber was observed with scanning electron microscopy. The fiber surface was effectively etched with carbon dioxide and argon plasma treatment

  1. Quantitative evaluation of plasma after methylene blue and white light treatment in four Chinese blood centers.

    Science.gov (United States)

    Chunhui, Yang; Guohui, Bian; Hong, Yang; Xiaopu, Xiao; Zherong, Bai; Mingyuan, Wang; Xinsheng, Zhang; Juanjuan, Wang; Changqing, Li; Wuping, Li

    2013-12-01

    Pathogen reduction technology is an important process in the blood safety system, including solvent/detergent treatment, filtration and methylene blue-photochemical technology (MB-PCT). To investigate the quality of MB-PCT-treated plasma, plasma samples from four Chinese blood centers were analyzed over 12 months of storage to determine the recovery of activities and levels of various plasma proteins. Ten plasma units each from the Suzhou, Yancheng, Chongqing and Shandong blood centers were divided into two aliquots. One was subjected to treatment with one of two methylene blue-photochemical technology instruments and the other was used as control. The treated and untreated sample pairs were stored at -30°C. The recovery rates of coagulation factors, inhibitor proteins, total protein, immunoglobulins, and complement proteins were measured at different time points after storage. The mean recovery of most proteins exceeded 80% after MB treatment. The exceptions were factor XI and fibrinogen, of which only 71.3-74% and 69.0-92.3% were retained during storage. The two equipment types differed in terms of residual MB concentration in the plasma samples (0.18 μM and 0.29 μM, respectively). They had similar protein recovery rates at 0.5 month but differed at later time points. The four blood centers differed significantly with regard to factor II, V, VIII and fibrinogen activities. Only the samples from the Shandong blood center met the methylene blue treated fresh frozen plasma requirement. The major factor that influenced the quality of the MB-FFP samples was the time taken between blood collection and storage. Methylene blue treated plasma showed reduced coagulation factor (CF) activity and protein levels. The MB treatment-induced damage to the proteins was acceptable at the four Chinese blood centers, but the quality of the MB-treated plasma in general was not satisfactory. The main factor affecting plasma quality may be the duration of the collection and

  2. Molecular surface structural changes of plasticized PVC materials after plasma treatment.

    Science.gov (United States)

    Zhang, Xiaoxian; Zhang, Chi; Hankett, Jeanne M; Chen, Zhan

    2013-03-26

    In this research, a variety of analytical techniques including sum frequency generation vibrational spectroscopy (SFG), coherent anti-Stokes Raman spectroscopy (CARS), and X-ray photoelectron spectroscopy (XPS) have been employed to investigate the surface and bulk structures of phthalate plasticized poly(vinyl chloride) (PVC) at the molecular level. Two types of phthalate molecules with different chain lengths, diethyl phthalate (DEP) and dibutyl phthalate (DBP), mixed with PVC in various weight ratios were examined to verify their different surface and bulk behaviors. The effects of oxygen and argon plasma treatment on PVC/DBP and PVC/DEP hybrid films were investigated on both the surface and bulk of films using SFG and CARS to evaluate the different plasticizer migration processes. Without plasma treatment, SFG results indicated that more plasticizers segregate to the surface at higher plasticizer bulk concentrations. SFG studies also demonstrated the presence of phthalates on the surface even at very low bulk concentration (5 wt %). Additionally, the results gathered from SFG, CARS, and XPS experiments suggested that the PVC/DEP system was unstable, and DEP molecules could leach out from the PVC under low vacuum after several minutes. In contrast, the PVC/DBP system was more stable; the migration process of DBP out of PVC could be effectively suppressed after oxygen plasma treatment. XPS results indicated the increase of C═O/C-O groups and decrease of C-Cl functionalities on the polymer surface after oxygen plasma treatment. The XPS results also suggested that exposure to argon plasma induced chemical bond breaking and formation of cross-linking or unsaturated groups with chain scission on the surface. Finally, our results indicate the potential risk of using DEP molecules in PVC since DEP can easily leach out from the polymeric bulk.

  3. Reel-to-Reel Atmospheric Pressure Dielectric Barrier Discharge (DBD Plasma Treatment of Polypropylene Films

    Directory of Open Access Journals (Sweden)

    Lukas JW Seidelmann

    2017-03-01

    Full Text Available Atmospheric pressure plasma treatment of the surface of a polypropylene film can significantly increase its surface energy and, thereby improve the printability of the film. A laboratory-scale dielectric barrier discharge (DBD system has therefore been developed, which simulates the electrode configuration and reel-to-reel web transport mechanism used in a typical industrial-scale system. By treating the polypropylene in a nitrogen discharge, we have shown that the water contact angle could be reduced by as much as 40° compared to the untreated film, corresponding to an increase in surface energy of 14 mNm−1. Ink pull-off tests showed that the DBD plasma treatment resulted in excellent adhesion of solvent-based inks to the polypropylene film.

  4. Low energy plasma treatment of a proton exchange membrane used for low temperature fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Charles, C [Space Plasma, Power, and Propulsion group, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Ramdutt, D [Space Plasma, Power, and Propulsion group, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Brault, P [GREMI-CNRS Laboratory, University of Orleans, BP 6744, F-45067, Orleans (France); Caillard, A [Space Plasma, Power, and Propulsion group, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Bulla, D [Space Plasma, Power, and Propulsion group, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Boswell, R [Space Plasma, Power, and Propulsion group, Research School of Physical Sciences and Engineering, Australian National University, Canberra, ACT 0200 (Australia); Rabat, H [GREMI-CNRS Laboratory, University of Orleans, BP 6744, F-45067, Orleans (France); Dicks, A [School of Engineering, University of Queensland, Brisbane, QLD 4072 (Australia)

    2007-05-15

    A low energy ({approx}30 V) plasma treatment of Nafion, a commercial proton exchange membrane used for low temperature fuel cells, is performed in a helicon radiofrequency (13.56 MHz) plasma system. For argon densities in the 10{sup 9}-10{sup 10} cm{sup -3} range, the water contact angle (hydrophobicity) of the membrane surface linearly decreases with an increase in the plasma energy dose, which is maintained below 5.1 J cm{sup -2}, and which results from the combination of an ion energy dose (up to 3.8 J cm{sup -2}) and a photon (mostly UV) energy dose (up to 1.3 J cm{sup -2}). The decrease in water contact angle is essentially a result of the energy brought to the surface by ion bombardment. The measured effect of the energy brought to the surface by UV light is found to be negligible.

  5. Low energy plasma treatment of a proton exchange membrane used for low temperature fuel cells

    Science.gov (United States)

    Charles, C.; Ramdutt, D.; Brault, P.; Caillard, A.; Bulla, D.; Boswell, R.; Rabat, H.; Dicks, A.

    2007-05-01

    A low energy (~30 V) plasma treatment of Nafion, a commercial proton exchange membrane used for low temperature fuel cells, is performed in a helicon radiofrequency (13.56 MHz) plasma system. For argon densities in the 109-1010 cm-3 range, the water contact angle (hydrophobicity) of the membrane surface linearly decreases with an increase in the plasma energy dose, which is maintained below 5.1 J cm-2, and which results from the combination of an ion energy dose (up to 3.8 J cm-2) and a photon (mostly UV) energy dose (up to 1.3 J cm-2). The decrease in water contact angle is essentially a result of the energy brought to the surface by ion bombardment. The measured effect of the energy brought to the surface by UV light is found to be negligible.

  6. X-Ray Diffraction Analysis of Bottom Ash Waste after Plasma Treatment

    Science.gov (United States)

    Volokitin, G.; Abzaev, Yu; Skripnikova, N.; Volokitin, O.; Shekhovtsov, V.

    2017-04-01

    The paper deals with the plasma-chemical synthesis of melts produced from the bottom ash waste for the production of new construction materials with enhanced performance characteristics. Phase composition of the plasma-treated bottom ash waste is detected by the X-ray diffraction analysis. The bottom ash waste is a mixture of SiO2 minerals. The structure and phase composition of this mixture are investigated after the plasma treatment. The obtained results are compared with the original state of the mixture. The identification and the qualitative content of ash waste as a multi-phase system are complicated by the overlapped reflections and a possible existence of the intermediate amorphous phase.

  7. Adhesion improvement of fibres by continuous plasma treatment at atmospheric pressure

    DEFF Research Database (Denmark)

    Kusano, Yukihiro; Løgstrup Andersen, Tom; Sørensen, Bent F.

    2013-01-01

    Carbon fibres and ultra-high-molecular-weight polyethylene (UHMWPE) fibres were continuously treated by a dielectric barrier discharge plasma at atmospheric pressure for adhesion improvement with epoxy resins. The plasma treatment improved wettability, increased the oxygen containing polar...

  8. HIV diversity and drug resistance from plasma and non-plasma analytes in a large treatment programme in western Kenya

    Directory of Open Access Journals (Sweden)

    Rami Kantor

    2014-11-01

    Full Text Available Introduction: Antiretroviral resistance leads to treatment failure and resistance transmission. Resistance data in western Kenya are limited. Collection of non-plasma analytes may provide additional resistance information. Methods: We assessed HIV diversity using the REGA tool, transmitted resistance by the WHO mutation list and acquired resistance upon first-line failure by the IAS–USA mutation list, at the Academic Model Providing Access to Healthcare (AMPATH, a major treatment programme in western Kenya. Plasma and four non-plasma analytes, dried blood-spots (DBS, dried plasma-spots (DPS, ViveSTTM-plasma (STP and ViveST-blood (STB, were compared to identify diversity and evaluate sequence concordance. Results: Among 122 patients, 62 were treatment-naïve and 60 treatment-experienced; 61% were female, median age 35 years, median CD4 182 cells/µL, median viral-load 4.6 log10 copies/mL. One hundred and ninety-six sequences were available for 107/122 (88% patients, 58/62 (94% treatment-naïve and 49/60 (82% treated; 100/122 (82% plasma, 37/78 (47% attempted DBS, 16/45 (36% attempted DPS, 14/44 (32% attempted STP from fresh plasma and 23/34 (68% from frozen plasma, and 5/42 (12% attempted STB. Plasma and DBS genotyping success increased at higher VL and shorter shipment-to-genotyping time. Main subtypes were A (62%, D (15% and C (6%. Transmitted resistance was found in 1.8% of plasma sequences, and 7% combining analytes. Plasma resistance mutations were identified in 91% of treated patients, 76% NRTI, 91% NNRTI; 76% dual-class; 60% with intermediate-high predicted resistance to future treatment options; with novel mutation co-occurrence patterns. Nearly 88% of plasma mutations were identified in DBS, 89% in DPS and 94% in STP. Of 23 discordant mutations, 92% in plasma and 60% in non-plasma analytes were mixtures. Mean whole-sequence discordance from frozen plasma reference was 1.1% for plasma-DBS, 1.2% plasma-DPS, 2.0% plasma-STP and 2

  9. Microwave Plasma System: PVA Tepla 300

    Data.gov (United States)

    Federal Laboratory Consortium — Description:CORAL Name: Microwave AsherA tool using microwave oxygen plasma to remove organics on the surfacesSpecifications / Capabilities:Frequency: 2.45 GHzPower:...

  10. Development of procedure for measurement of Pb isotope ratios in seawater by application of seaFAST sample pre-treatment system and Sector Field Inductively Coupled Plasma Mass Spectrometry

    Science.gov (United States)

    Vassileva, Emilia; Wysocka, Irena

    2016-12-01

    Anthropogenic Pb in the oceans, derived from high-temperature industrial processes, fuel combustion and incineration can have an isotopic signature distinct from naturally occurring Pb, supplied by rock weathering. To identify the different pollution sources accurately and to quantify their relative contributions, Pb isotope ratios are widely used. Due to the high salt content (approximately 3.5% of total dissolved solids) and very low levels of Pb (typically from 1 to 100 ng L- 1) in seawater the determination of Pb isotope ratios requires preliminary matrix separation and analyte preconcentration. An analytical protocol for the measurements of Pb isotope ratios in seawater combining seaFAST sample pre-treatment system and Sector Field Inductively Coupled Plasma Mass Spectrometry (SF ICP-MS) was developed. The application of seaFAST system was advantageous, because of its completely closed working cycle and small volumes of chemicals introduced in pre-treatment step, resulting in very low detection limits and procedural blanks. The preconcentration/matrix separation step was also of crucial importance for minimizing the isobaric and matrix interferences, coming from the seawater. In order to differentiate between anthropogenic and natural Pb sources, particular attention was paid to the determination of 204Pb isotope because of its implication in some geological interpretations. The validation of the analytical procedure was effectuated according to the recommendations of the ISO/IEC 17025 standard. The method was validated by processing the common Pb isotope reference material NIST SRM 981. All major sources of uncertainty were identified and propagated together following the ISO/GUM guidelines. The estimation of the total uncertainty associated to each measurement result was fundamental tool for sorting the main sources of possible biases. The developed analytical procedure was applied to the coastal and open seawater samples, collected in different regions of

  11. Optimization of audio - ultrasonic plasma system parameters

    Science.gov (United States)

    Haleem, N. A.; Abdelrahman, M. M.; Ragheb, M. S.

    2016-10-01

    The present plasma is a special glow plasma type generated by an audio ultrasonic discharge voltage. A definite discharge frequency using a gas at a narrow band pressure creates and stabilizes this plasma type. The plasma cell is a self-extracted ion beam; it is featured with its high output intensity and its small size. The influence of the plasma column length on the output beam due to the variation of both the audio discharge frequency and the power applied to the plasma electrodes is investigated. In consequence, the aim of the present work is to put in evidence the parameters that influence the self-extracted collected ion beam and to optimize the conditions that enhance the collected ion beam. The experimental parameters studied are the nitrogen gas, the applied frequency from 10 to 100 kHz, the plasma length that varies from 8 to 14 cm, at a gas pressure of ≈ 0.25 Torr and finally the discharge power from 50 to 500 Watt. A sheet of polyethylene of 5 micrometer covers the collector electrode in order to confirm how much ions from the beam can go through the polymer and reach the collector. To diagnose the occurring events of the beam on the collector, the polymer used is analyzed by means of the FTIR and the XRF techniques. Optimization of the plasma cell parameters succeeded to enhance and to identify the parameters that influence the output ion beam and proved that its particles attaining the collector are multi-energetic.

  12. Treatment of mixed wastes by thermal plasma discharges; Tratamiento de desechos mixtos por descargas de plasma termico

    Energy Technology Data Exchange (ETDEWEB)

    Diaz A, L.V.; Pacheco S, J.O.; Pacheco P, M.; Monroy G, F.; Emeterio H, M. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: lauradiazarch@yahoo.com.mx

    2007-07-01

    The National Institute of Nuclear Research (ININ) uses an ion exchange resin: IRN 150 (copolymer styrene Divynilbencene) in the TRIGA Mark III reactor to absorb polluted particles with heavy metals and radioactive particles of low level. Once the capacity of filtrate of the resin is exceeded, it is replaced and considered with a mixed waste. This work is based on taking advantage of the advantages of the technique of the thermal plasma in a unique process: (high energy density 105W/cm{sup 3} high enthalpy, high reactivity chemical, high operation temperatures 6000-11500K and quick quenching 106K/s) for the degradation and vitrification of the resin IRN 150. The reactor of plasma is compact and it works to atmospheric pressure and reduced thermal inertia. Therefore, the main parameters involved during the degradation tests and vitrification are: plasma current, voltage, gas flow and distance among the electrodes. The used vitreous matrix, is obtained from a ceramic clay composed by an oxides mixture which are characterized by their good resistance to mechanical impacts and erosion caused by the water. The ceramic clay and the resin IRN 150 were analyzed before the treatment by Scanning Electron Microscopy (MEB), X-ray Diffraction (DRX), Thermal gravimetry (TGA) once vitrified the materials were also analyzed by MEB and DRX. It is obtained as a result that the material more appropriate to be used as vitreous matrix it is a ceramic clay formed by several oxides, being operated the plasma system with a current of 115A, voltage of 25V, flow of the argon gas of 5 l/m and a distance among electrodes of 10mm. With the development of the proposed technology and the material for the vitreous matrix, be rotted to try in a future a great variety of mixed waste. (Author)

  13. Optical Characterization of Plasma Generated in a Commercial Grade Plasma Etching System

    Science.gov (United States)

    Hardy, Ashley; Drake, Dereth

    2015-11-01

    The use of plasma for etching and cleaning of many types of metal surfaces is becoming more prominent in industry. This is primarily due to the fact that plasma etching can reduce the amount of time necessary to clean/etch the surface and does not require large amounts of environmentally hazardous chemicals. Most plasma etching systems are designed and built in academic institutions. These systems provide reasonable etching rates and easy accessibility for monitoring plasma parameters. The downside is that the cost is typically high. Recently a number of commercial grade plasma etchers have been introduced on the market. These etching systems cost near a fraction of the price, making them a more economical choice for researchers in the field. However, very few academics use these devices because their effectiveness has not yet been adequately verified in the current literature. We will present the results from experiments performed in a commercial grade plasma etching system, including analysis of the pulse characteristics observed by a photo diode and the plasma parameters obtained with optical emission spectroscopy.

  14. Treatment of Candida albicans biofilms with low-temperature plasma induced by dielectric barrier discharge and atmospheric pressure plasma jet

    Energy Technology Data Exchange (ETDEWEB)

    Koban, Ina; Welk, Alexander; Meisel, Peter; Holtfreter, Birte; Kocher, Thomas [Unit of Periodontology, Dental School, University of Greifswald, Rotgerberstr. 8, 17475 Greifswald (Germany); Matthes, Rutger; Huebner, Nils-Olaf; Kramer, Axel [Institute for Hygiene and Environmental Medicine, University of Greifswald, Walther-Rathenau-Str. 49 a, 17487 Greifswald (Germany); Sietmann, Rabea [Institute of Microbiology, University of Greifswald, Friedrich-Ludwig-Jahn-Str. 15, 17487 Greifswald (Germany); Kindel, Eckhard; Weltmann, Klaus-Dieter, E-mail: ina.koban@uni-greifswald.d [Leibniz Institute for Plasma Science and Technology (INP), Felix-Hausdorff-Str. 2, 17489 Greifswald (Germany)

    2010-07-15

    Because of some disadvantages of chemical disinfection in dental practice (especially denture cleaning), we investigated the effects of physical methods on Candida albicans biofilms. For this purpose, the antifungal efficacy of three different low-temperature plasma devices (an atmospheric pressure plasma jet and two different dielectric barrier discharges (DBDs)) on Candida albicans biofilms grown on titanium discs in vitro was investigated. As positive treatment controls, we used 0.1% chlorhexidine digluconate (CHX) and 0.6% sodium hypochlorite (NaOCl). The corresponding gas streams without plasma ignition served as negative treatment controls. The efficacy of the plasma treatment was determined evaluating the number of colony-forming units (CFU) recovered from titanium discs. The plasma treatment reduced the CFU significantly compared to chemical disinfectants. While 10 min CHX or NaOCl exposure led to a CFU log{sub 10} reduction factor of 1.5, the log{sub 10} reduction factor of DBD plasma was up to 5. In conclusion, the use of low-temperature plasma is a promising physical alternative to chemical antiseptics for dental practice.

  15. Numerical studies on divertor plasmas in helical systems

    Energy Technology Data Exchange (ETDEWEB)

    Ueda, Noriaki (Mitsubishi Atomic Power Industries, Inc., Tokyo (Japan)); Itoh, Kimitaka; Itoh, Sanae

    1989-12-01

    Scrape-off layer and divertor plasmas in helical systems are studied by using the two-dimensional (2D) numerical simulation code. Unified edge divertor analysis code (UEDA code) is applied to the straight helical model of torsatron/helical heliotron configurations. 2D profiles of plasma parameter, neutrals and impurities are obtained. Erosion rate and neutral back flow rate to the core plasma are also evaluated. Various shapes of the buffle plate are examined from the view point of the establishment of 'dense-cold divertor plasma' by which we can avoid the damage of the target plate. (author).

  16. Final treatment of spent batteries by thermal plasma.

    Science.gov (United States)

    Cubas, Anelise Leal Vieira; Machado, Marina de Medeiros; Machado, Marília de Medeiros; Dutra, Ana Regina de Aguiar; Moecke, Elisa Helena Siegel; Fiedler, Haidi D; Bueno, Priscila

    2015-08-15

    The growth in the use of wireless devices, notebooks and other electronic products has led to an ever increasing demand for batteries, leading to these products being commonly found in inappropriate locations, with adverse effects on the environment and human health. Due to political pressure and according to the environmental legislation which regulates the destination of spent batteries, in several countries the application of reverse logistics to hazardous waste is required. Thus, some processes have been developed with the aim of providing an appropriate destination for these products. In this context, a method for the treatment of spent batteries using thermal plasma technology is proposed herein. The efficiency of the method was tested through the determination of parameters, such as total organic carbon, moisture content and density, as well as analysis by atomic absorption spectrometry, scanning electron microscopy and X-ray fluorescence using samples before and after inertization. The value obtained for the density was 19.15%. The TOC results indicated 8.05% of C in the batteries prior to pyrolisis and according to the XRF analysis Fe, S, Mn and Zn were the most stable elements in the samples (highest peaks). The efficiency of the paste inertization was 97% for zinc and 99.74% for manganese. The results also showed that the most efficient reactor was that with the DC transferred arc plasma torch and quartzite sand positively influenced by the vitrification during the pyrolysis of the electrolyte paste obtain from batteries.

  17. RF atmospheric plasma jet surface treatment of paper

    Science.gov (United States)

    Pawlat, Joanna; Terebun, Piotr; Kwiatkowski, Michał; Diatczyk, Jaroslaw

    2016-09-01

    A radio frequency RF atmospheric pressure plasma jet was used to enhance the wettability of cellulose-based paper of 90 g m-2 and 160 g m-2 grammage as a perspective platform for antibiotic sensitivity tests. Helium and argon were the carrier gases for oxygen and nitrogen; pure water and rapeseed oil were used for goniometric tests. The influence of the flow rate and gas type, the power of the discharge, and distance from the nozzle was examined. The surface structure was observed using an optical microscope. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectra were investigated in order to determine whether cellulose degradation processes occurred. The RF plasma jet allowed us to decrease the surface contact angle without drastic changes in other features of the tested material. Experiments confirmed the significant influence of the distance between the treated sample and reactor nozzle, especially for treatment times longer than 15 s due to the greater concentration of reactive species at the surface of the sample, which decreases with distance—and their accumulation effect with time. The increase of discharge power plays an important role in decreasing the surface contact angle for times longer than 10 s. Higher power had a positive effect on the amount of generated active particles and facilitated the ignition of discharge. However, a too high value can cause a rise in temperature of the material and heat-caused damage.

  18. Long and short term effects of plasma treatment on meristematic plant cells

    Science.gov (United States)

    Puač, N.; Živković, S.; Selaković, N.; Milutinović, M.; Boljević, J.; Malović, G.; Petrović, Z. Lj.

    2014-05-01

    In this paper, we will present results of plasma treatments of meristematic cells of Daucus carota. Plasma needle was used as an atmospheric pressure/gas composition source of non-equilibrium plasma in all treatments. Activity of antioxidant enzymes superoxide dismutase and catalase was measured immediately after plasma treatment and after two weeks following the treatment. Superoxide dismutase activity was increased in samples immediately after the plasma treatment. On the other hand, catalase activity was much higher in treated samples when measured two weeks after plasma treatment. These results show that there is a direct proof of the triggering of signal transduction in the cells by two reactive oxygen species H2O2 and O2-, causing enzyme activity and short and long term effects even during the growth of calli, where the information is passed to newborn cells over the period of two weeks.

  19. Method for Cleaning Laser-Drilled Holes on Printed Wiring Boards by Plasma Treatment

    Science.gov (United States)

    Hirogaki, Toshiki; Aoyama, Eiichi; Minagi, Ryu; Ogawa, Keiji; Katayama, Tsutao; Matsuoka, Takashi; Inoue, Hisahiro

    We propose a new method for cleaning blind via holes after laser drilling of PWBs using oxygen plasma treatment. This report dealt with three kinds of PWB materials: epoxy resin and two kinds of aramid fiber reinforced plastics (AFRP: Technora or Kevlar fiber reinforcement). We observed the drilled holes after plasma treatment using both an optical and a scanning electric microscope (SEM). It was confirmed that adequate etching took place in the drilled holes by plasma treatment. We also compared the hole wall and hole bottom after plasma treatment with ones after chemical etching. It was clear that there was no damage to the aramid fiber tip on the hole wall, and that a smooth roughness of the hole wall was obtained by means of plasma treatment. As a result, we demonstrated that the plasma treatment is effective in cleaning the laser drilled holes of PWBs.

  20. Development of New Sputter System by Magnetic Null Plasma

    OpenAIRE

    敦田, 悟; 楊, 鍾煥; 川尻, 晋平; 成, 烈[ブン; 本田, 親久; 大坪, 昌久

    2004-01-01

    Abstract ###A new type of plasma system based on the magnetic neutral loop discharge (NLD) concept ###has been developed for sputter application. This system is characterized by plasma production ###around the multi null magnetic field on the electrode surface, where a capacitive RF electric ###field is applied. From the experimental results and numerical analysis of electron behavior in ###this system, we found that electrons around the magnetic null region on the target surface ###moved in ...

  1. Fast ion beam-plasma interaction system.

    Science.gov (United States)

    Breun, R A; Ferron, J R

    1979-07-01

    A device has been constructed for the study of the interaction between a fast ion beam and a target plasma of separately controllable parameters. The beam of either hydrogen or helium ions has an energy of 1-4 keV and a total current of 0.5-2 A. The beam energy and beam current can be varied separately. The ion source plasma is created by a pulsed (0.2-10-ms pulse length) discharge in neutral gas at up to 3 x 10(-3) Torr. The neutrals are pulsed into the source chamber, allowing the neutral pressure in the target region to remain less than 5 x 10(-5) Torr at a 2-Hz repetition rate. The creation of the source plasma can be described by a simple set of equations which predict optimum source design parameters. The target plasma is also produced by a pulsed discharge. Between the target and source chambers the beam is neutralized by electrons drawn from a set of hot filaments. Currently under study is an unstable wave in a field-free plasma excited when the beam velocity is nearly equal to the target electron thermal velocity (v(beam) approximately 3.5 x 10(7) cm/s, Te = 0.5 eV).

  2. Integrated nonthermal treatment system study

    Energy Technology Data Exchange (ETDEWEB)

    Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J. [Morrison Knudsen Corp. (United States); Quapp, W.J. [Nuclear Metals (United States); Bechtold, T.; Brown, B.; Schwinkendorf, W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Swartz, G. [Swartz and Associates (United States)

    1997-01-01

    This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs.

  3. Change in Properties of Wool Fabrics by Low Temperature Plasma Treatment

    OpenAIRE

    奥野, 温子; 江川, 文; 浅野, 昌美; 吉田, 恭子; 安田, 武

    1999-01-01

    The effect of plasma treatment using various gases on the end use properties of wool fabrics was investigated. The results are summarized as follows: The etching by air plasma generated remarkable irregularities on the surface of the wool fabrics, and the static friction coefficient tended to increase. However, the treatment softened the fabric handling. On the other hand, the plasma treatment using CF_4 and N_2 gas hardly changed the fabric handling in spite of a large weight loss of the sam...

  4. Sewage sludge treatment system

    Science.gov (United States)

    Kalvinskas, John J. (Inventor); Mueller, William A. (Inventor)

    1976-01-01

    Raw sewage may be presently treated by mixing screened raw sewage with activated carbon. The mixture is then allowed to stand in a first tank for a period required to settle the suspended matter to the bottom of the tank as a sludge. Thereafter, the remaining liquid is again mixed with activated carbon and the mixture is transferred to a secondary settling tank, where it is permitted to stand for a period required for the remaining floating material to settle as sludge and for adsorption of sewage carbon as well as other impurities to take place. The sludge from the bottom of both tanks is removed and pyrolyzed to form activated carbon and ash, which is mixed with the incoming raw sewage and also mixed with the liquid being transferred from the primary to the secondary settling tank. It has been found that the output obtained by the pyrolysis process contains an excess amount of ash. Removal of this excess amount of ash usually also results in removing an excess amount of carbon thereby requiring adding carbon to maintain the treatment process. By separately pyrolyzing the respective sludges from the first and second settling tanks, and returning the separately obtained pyrolyzed material to the respective first and second tanks from which they came, it has been found that the adverse effects of the excessive ash buildup is minimized, the carbon yield is increased, and the sludge from the secondary tank can be pyrolyzed into activated carbon to be used as indicated many more times than was done before exhaustion occurs.

  5. Successful treatment with 308-nm monochromatic excimer light and subsequent tacrolimus 0.03% ointment in refractory plasma cell cheilitis.

    Science.gov (United States)

    Yoshimura, Kazuhiro; Nakano, Shunji; Tsuruta, Daisuke; Ohata, Chika; Hashimoto, Takashi

    2013-06-01

    Plasma cell cheilitis is a chronic inflammatory disease that presents with erythema, erosions, ulcers and occasional nodules within the mucosa, including the lips. It is histopathologically characterized by dense plasma cell infiltration in the lamina propria of the mucous membranes. Several treatments for plasma cell cheilitis have been reported, including topical steroids, topical antibiotics or topical tacrolimus. However, 308-nm monochromatic excimer light (MEL) has never been reported as a treatment option, while it was reported to be very effective in treating erosive oral lichen planus. We report a 62-year-old man who had chronic plasma cell cheilitis on the lower lip, which was refractory to topical and systemic corticosteroid. The lesion and severe pain were significantly improved by the treatment with nine sessions of 308-nm MEL twice per week with a total dose of 1120 mJ/cm(2). However, the lesion gradually worsened after treatment frequency was reduced to once per month. Subsequent tacrolimus 0.03% ointment cleared the lesion completely in a month and no recurrence was observed a year later. Refractory plasma cell cheilitis and concomitant severe pain quickly responded to 308-nm MEL when administrated twice per week. Because the long interval between each MEL treatment seemed ineffective to improve the lesion, appropriate frequency and adequate total dose of MEL treatment may be necessary for a successful treatment.

  6. Electron cyclotron resonance heating in a short cylindrical plasma system

    Indian Academy of Sciences (India)

    Vipin K Yadav; D Bora

    2004-09-01

    Electron cyclotron resonance (ECR) plasma is produced and studied in a small cylindrical system. Microwave power is delivered by a CW magnetron at 2.45 GHz in TE10 mode and launched radially to have extraordinary (X) wave in plasma. The axial magnetic field required for ECR in the system is such that the first two ECR surfaces ( = 875.0 G and = 437.5 G) reside in the system. ECR plasma is produced with hydrogen with typical plasma density e as 3.2 × 1010 cm-3 and plasma temperature e between 9 and 15 eV. Various cut-off and resonance positions are identified in the plasma system. ECR heating (ECRH) of the plasma is observed experimentally. This heating is because of the mode conversion of X-wave to electron Bernstein wave (EBW) at the upper hybrid resonance (UHR) layer. The power mode conversion efficiency is estimated to be 0.85 for this system. The experimental results are presented in this paper.

  7. Thermal plasma technology for the treatment of wastes: a critical review.

    Science.gov (United States)

    Gomez, E; Rani, D Amutha; Cheeseman, C R; Deegan, D; Wise, M; Boccaccini, A R

    2009-01-30

    This review describes the current status of waste treatment using thermal plasma technology. A comprehensive analysis of the available scientific and technical literature on waste plasma treatment is presented, including the treatment of a variety of hazardous wastes, such as residues from municipal solid waste incineration, slag and dust from steel production, asbestos-containing wastes, health care wastes and organic liquid wastes. The principles of thermal plasma generation and the technologies available are outlined, together with potential applications for plasma vitrified products. There have been continued advances in the application of plasma technology for waste treatment, and this is now a viable alternative to other potential treatment/disposal options. Regulatory, economic and socio-political drivers are promoting adoption of advanced thermal conversion techniques such as thermal plasma technology and these are expected to become increasingly commercially viable in the future.

  8. Study of Plasma Treatment of Produced Water from Oil and Gas Exploration

    Science.gov (United States)

    Wright, Kamau

    Unconventional gas and hydraulic fracturing is helping to increase natural gas production, which is widely viewed in the U.S. as a key asset to bolstering a clean and energy-independent future. Safe and economical management and treatment of water produced during such processes remain of key importance. With the increase of hydrocarbon production and national shale gas production expected to increase threefold and account for nearly half of all natural gas produced by 2035, advanced water treatment and management processes must be investigated, to ensure water conservation and associated economic prudence. The state of the art of produced water treatment technologies is described including the efficacy of plasma to modulate the contents of such aqueous solutions, meeting target parameters and potentially enabling the operation of other treatment technologies. Among other effects, progress is presented on the enhancement of an arc-in-water system to remove bicarbonate ions and prevent the mineral fouling ability of water which causes formation of CaCO3 in heat exchangers and distillation units. Qualitative and quantitative treatment targets of produced water treatment are discussed. Experimental work is conducted to test theories and identify and reproduce favorable effects useful to treating wastewaters. Plasma arc-in-water systems demonstrated capability of producing bicarbonate-depleted wastewaters, with experiments with gas-field produced waters indicating that generation of H+ ions plays a greater role in bicarbonate ion removal than local heating. Tests showed abatement of bicarbonate ions from a range of 684--778 mg/L down to zero. Subsequent scaling/fouling tests with waters ranging from 0 to 500 mg/L bicarbonate ions, in the presence of high calcium ion concentrations, showed that scale thickness, as well as mass on a 1-kW heating element was an order of magnitude less for process water containing 100 mg/L bicarbonate ions compared to process water with 500

  9. Efficacy of plasma exchange and immunoadsorption in systemic lupus erythematosus and antiphospholipid syndrome: A systematic review.

    Science.gov (United States)

    Kronbichler, Andreas; Brezina, Biljana; Quintana, Luis F; Jayne, David R W

    2016-01-01

    Extracorporeal treatments have been used since the 1970s in the management of systemic lupus erythematosus (SLE). A randomised controlled trial comparing the efficacy of standard of care (SOC) combined with plasma exchange against SOC alone in patients with lupus nephritis revealed no difference in terms of renal outcome. Subsequently, initial expectations have been dampened and further experience with plasma exchange is mainly limited to observational studies and single case reports. Beneficial effects have been reported in patients with refractory disease course or in pregnancy with prior complications due to SLE and antiphospholipid syndrome. A more specific form of extracorporeal treatment, immunoadsorption (IAS), has emerged as a valuable option in the treatment of SLE. In line with the plasma exchange experience, IAS seems to have beneficial effects in patients with refractory disease, contraindications to standard immunosuppression or during pregnancy. The mechanism IAS relates to autoantibody removal but for plasma exchange removal of activated complement components, coagulation factors, cytokines and microparticles may also be relevant. Both treatment forms have good safety profiles although reactions to blood product replacement in plasma exchange and procedure related complications such as bleeding or catheter-related infections have occurred. There is a need to more clearly define the clinical utility of plasma exchange and IAS in refractory lupus and APS subgroups.

  10. Application of particle image velocimetry to dusty plasma systems

    Science.gov (United States)

    Williams, Jeremiah D.

    2016-06-01

    > Particle image velocimetry is a fluid measurement technique that has been used for more than 20 years to characterize the particle transport and thermal state of dusty plasma systems. This manuscript provides an overview of this diagnostic technique, highlighting the strengths and limitations that are associated with its use. Additionally, the variations of this technique that have been applied in the study of dusty plasma systems will be discussed, along with a small selection of measurements that can be made with the technique. Potential future directions for this diagnostic tool within the dusty plasma community will also be discussed.

  11. Chaotic synchronization in coupled spatially extended beam-plasma systems

    OpenAIRE

    Filatov, Roman A.; Hramov, Alexander E.; ALEXEY A. KORONOVSKII

    2006-01-01

    The appearance of the chaotic synchronization regimes has been discovered for the coupled spatially extended beam-plasma Pierce systems. The coupling was introduced only on the right bound of each subsystem. It has been shown that with coupling increase the spatially extended beam-plasma systems show the transition from asynchronous behavior to the phase synchronization and then to the complete synchronization regime. For the consideration of the chaotic synchronization we used the concept of...

  12. Studies on plasma production in a large volume system using multiple compact ECR plasma sources

    Science.gov (United States)

    Tarey, R. D.; Ganguli, A.; Sahu, D.; Narayanan, R.; Arora, N.

    2017-01-01

    This paper presents a scheme for large volume plasma production using multiple highly portable compact ECR plasma sources (CEPS) (Ganguli et al 2016 Plasma Source Sci. Technol. 25 025026). The large volume plasma system (LVPS) described in the paper is a scalable, cylindrical vessel of diameter  ≈1 m, consisting of source and spacer sections with multiple CEPS mounted symmetrically on the periphery of the source sections. Scaling is achieved by altering the number of source sections/the number of sources in a source section or changing the number of spacer sections for adjusting the spacing between the source sections. A series of plasma characterization experiments using argon gas were conducted on the LVPS under different configurations of CEPS, source and spacer sections, for an operating pressure in the range 0.5-20 mTorr, and a microwave power level in the range 400-500 W per source. Using Langmuir probes (LP), it was possible to show that the plasma density (~1  -  2  ×  1011 cm-3) remains fairly uniform inside the system and decreases marginally close to the chamber wall, and this uniformity increases with an increase in the number of sources. It was seen that a warm electron population (60-80 eV) is always present and is about 0.1% of the bulk plasma density. The mechanism of plasma production is discussed in light of the results obtained for a single CEPS (Ganguli et al 2016 Plasma Source Sci. Technol. 25 025026).

  13. Study of oxygen plasma pre-treatment of polyester fabric for improved polypyrrole adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Mehmood, Tariq [School of Engineering, Deakin University, Geelong, Victoria 3216 (Australia); Kaynak, Akif, E-mail: akaynak@deakin.edu.au [School of Engineering, Deakin University, Geelong, Victoria 3216 (Australia); Dai, Xiujuan J. [Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216 (Australia); Kouzani, Abbas [School of Engineering, Deakin University, Geelong, Victoria 3216 (Australia); Magniez, Kevin; Rubin de Celis, David; Hurren, Christopher J. [Institute for Frontier Materials, Deakin University, Geelong, Victoria 3216 (Australia); Plessis, Johan du [School of Applied Sciences, RMIT University, GPO Box 2476V, Melbourne, Victoria 3001 (Australia)

    2014-01-15

    In this work, we have systematically studied the improvement of binding of polypyrrole with polyethylene terephthalate (PET) thin films and fabrics using low pressure oxygen plasma. A range of plasma treatment times were employed to investigate plasma induced effects on surface roughness, surface chemistry and hydrophilicity. Modifications of PET films were studied with respect to surface morphology by means of atomic force and scanning electron microscopy. Chemical effects of plasma treatment were studied using X-ray photoelectron spectroscopy. Results showed that both the increase in surface functionalisation by carboxylic groups and formation of nano size roughness contributed to improved adhesion and conductivity. - Highlights: • Improved adhesion between polypyrrole and polyester due to oxygen plasma treatment. • Formation of additional C–O and O–C=O groups due to plasma reactions. • Plasma induced increase in surface energy and roughness.

  14. Phosphorus doped graphene by inductively coupled plasma and triphenylphosphine treatments

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Dong-Wook, E-mail: shindong37@skku.edu; Kim, Tae Sung; Yoo, Ji-Beom, E-mail: jbyoo@skku.edu

    2016-10-15

    Highlights: • Substitution doping is a promising method for opening the energy band gap of graphene. • Substitution doping with phosphorus in the graphene lattice has numerous advantage such as high band gap, low formation energy, and high net charge density compared to nitrogen. • V{sub dirac} of Inductively coupled plasma (ICP) and triphenylphosphine (TPP) treated graphene was −57 V, which provided clear evidence of n-type doping. • Substitutional doping of graphene with phosphorus is verified by the XPS spectra of P 2p core level and EELS mapping of phosphorus. • The chemical bonding between P and graphene is very stable for a long time in air (2 months). - Abstract: Graphene is considered a host material for various applications in next-generation electronic devices. However, despite its excellent properties, one of the most important issues to be solved as an electronic material is the creation of an energy band gap. Substitution doping is a promising method for opening the energy band gap of graphene. Herein, we demonstrate the substitutional doping of graphene with phosphorus using inductively coupled plasma (ICP) and triphenylphosphine (TPP) treatments. The electrical transfer characteristics of the phosphorus doped graphene field effect transistor (GFET) have a V{sub dirac} of ∼ − 54 V. The chemical bonding between P and C was clearly observed in XPS spectra, and uniform distribution of phosphorus within graphene domains was confirmed by EELS mapping. The capability for substitutional doping of graphene with phosphorus can significantly promote the development of graphene based electronic devices.

  15. Water Treatment Technology - Distribution Systems.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on distribution systems provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pipe for distribution systems, types…

  16. Water Treatment Technology - Distribution Systems.

    Science.gov (United States)

    Ross-Harrington, Melinda; Kincaid, G. David

    One of twelve water treatment technology units, this student manual on distribution systems provides instructional materials for six competencies. (The twelve units are designed for a continuing education training course for public water supply operators.) The competencies focus on the following areas: types of pipe for distribution systems, types…

  17. Transition regions in solar system and astrophysical plasmas

    Science.gov (United States)

    Eastman, Timothy E.

    1990-01-01

    A brief review is presented of basic particle and field characteristics of plasmas observed within the solar system, especially near transition regions, and their parameter ranges are compared with those inferred for stellar winds and the interstellar medium. Parameter ranges for solar system and astrophysical plasmas are found to have considerable overlap. In addition, astrophysics provides unique, global perspectives of large-scale systems, whereas solar-system space physics provides for direct quantitative testing of physical processes. Astrophysics and solar-system space physics studies thus have complementary and synergistic roles.

  18. Plasma sources of solar system magnetospheres

    CERN Document Server

    Blanc, Michel; Chappell, Charles; Krupp, Norbert

    2016-01-01

    This volume reviews what we know of the corresponding plasma source for each intrinsically magnetized planet. Plasma sources fall essentially in three categories: the solar wind, the ionosphere (both prevalent on Earth), and the satellite-related sources. Throughout the text, the case of each planet is described, including the characteristics, chemical composition and intensity of each source. The authors also describe how the plasma generated at the source regions is transported to populate the magnetosphere, and how it is later lost. To summarize, the dominant sources are found to be the solar wind and sputtered surface ions at Mercury, the solar wind and ionosphere at Earth (the relative importance of the two being discussed in a specific introductory chapter), Io at Jupiter and – a big surprise of the Cassini findings – Enceladus at Saturn. The situation for Uranus and Neptune, which were investigated by only one fly-by each, is still open and requires further studies and exploration. In the final cha...

  19. Method and system for nanoscale plasma processing of objects

    Science.gov (United States)

    Oehrlein, Gottlieb S.; Hua, Xuefeng; Stolz, Christian

    2008-12-30

    A plasma processing system includes a source of plasma, a substrate and a shutter positioned in close proximity to the substrate. The substrate/shutter relative disposition is changed for precise control of substrate/plasma interaction. This way, the substrate interacts only with a fully established, stable plasma for short times required for nanoscale processing of materials. The shutter includes an opening of a predetermined width, and preferably is patterned to form an array of slits with dimensions that are smaller than the Debye screening length. This enables control of the substrate/plasma interaction time while avoiding the ion bombardment of the substrate in an undesirable fashion. The relative disposition between the shutter and the substrate can be made either by moving the shutter or by moving the substrate.

  20. Plasma treatment of polypropylene fabric for improved dyeability with soluble textile dyestuff

    Energy Technology Data Exchange (ETDEWEB)

    Yaman, Necla [Department of Textile Engineering, Usak University, Usak Universitesi Mueh. Fak. Tekstil Mueh. Boel. Bir Eyluel Kampusue Usak (Turkey); Ozdogan, Esen [Department of Textile Engineering, Ege University, E.U. Mueh. Fak. Tekstil Mueh. Boel., 35100 Bornova-Izmir (Turkey); Seventekin, Necdet, E-mail: necdet.seventekin@ege.edu.tr [Department of Textile Engineering, Ege University, E.U. Mueh. Fak. Tekstil Mueh. Boel., 35100 Bornova-Izmir (Turkey); Ayhan, Hakan [Department of Chemistry, Biochemistry Division, Mugla Uni. Fen Edebiyat Fak. Kimya Boel., 48000 Koetekli-Mugla (Turkey)

    2009-05-15

    The impact of plasma treatment parameters on the surface morphology, physical-chemical, and dyeing properties of polypropylene (PP) using anionic and cationic dyestuffs were investigated in this study. Argon plasma treatment was used to activate PP fabric surfaces. Activated surfaces were grafted different compounds: 6-aminohexanoic acid (6-AHA), acrylic acid (AA), ethylendiamine (EDA), acryl amide (AAMID) and hexamethyldisiloxane (HMDS). Compounds were applied after the plasma treatment and the acid and basic dyeing result that was then observed, were quite encouraging in certain conditions. The possible formed oxidizing groups were emphasized by FTIR and ATR and the surface morphology of plasma treated PP fibers was also investigated with scanning electron microscopy (SEM). PP fabric could be dyed with acid and basic dyestuffs after only plasma treatment and plasma induced grafting, and fastnesses of the dyed samples were satisfactory.

  1. Plasma treatment of polypropylene fabric for improved dyeability with soluble textile dyestuff

    Science.gov (United States)

    Yaman, Necla; Özdoğan, Esen; Seventekin, Necdet; Ayhan, Hakan

    2009-05-01

    The impact of plasma treatment parameters on the surface morphology, physical-chemical, and dyeing properties of polypropylene (PP) using anionic and cationic dyestuffs were investigated in this study. Argon plasma treatment was used to activate PP fabric surfaces. Activated surfaces were grafted different compounds: 6-aminohexanoic acid (6-AHA), acrylic acid (AA), ethylendiamine (EDA), acryl amide (AAMID) and hexamethyldisiloxane (HMDS). Compounds were applied after the plasma treatment and the acid and basic dyeing result that was then observed, were quite encouraging in certain conditions. The possible formed oxidizing groups were emphasized by FTIR and ATR and the surface morphology of plasma treated PP fibers was also investigated with scanning electron microscopy (SEM). PP fabric could be dyed with acid and basic dyestuffs after only plasma treatment and plasma induced grafting, and fastnesses of the dyed samples were satisfactory.

  2. Radio-frequency Ar plasma treatment on muga silk fiber: correlation between physicochemical and surface morphology

    Science.gov (United States)

    Gogoi, Dolly; Chutia, Joyanti; Choudhury, Arup Jyoti; Pal, Arup Ratan; Patil, Dinkar

    2012-11-01

    Radio-frequency (RF) Ar plasma treatment is carried out on natural muga silk fibers in a capacitively coupled plasma reactor. The physical and thermal properties of the muga fibers are investigated at an RF power of 20 W and in the treatment time range of 5 to 20 min. The virgin and plasma-treated muga fibers are characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The effect of Ar plasma treatment can be observed only on the outermost layer of the muga fibers without any significant variation in their bulk and thermal properties, as supported by differential scanning calorimetry and thermogravimetric analysis. Improvement in tensile strength and hydrophobicity of the plasma-treated muga fibers is observed at lower treatment time and RF power. Attempts are made to correlate the properties of the plasma-treated muga fibers with their surface chemistry and surface morphologies.

  3. Impact of plasma noise on a direct thrust measurement system

    Science.gov (United States)

    Pottinger, S. J.; Lamprou, D.; Knoll, A. K.; Lappas, V. J.

    2012-03-01

    In order to evaluate the accuracy and sensitivity of a pendulum-type thrust measurement system, a linear variable differential transformer (LVDT) and a laser optical displacement sensor have been used simultaneously to determine the displacement resulting from an applied thrust. The LVDT sensor uses an analog interface, whereas the laser sensor uses a digital interface to communicate the displacement readings to the data acquisition equipment. The data collected by both sensors show good agreement for static mass calibrations and validation with a cold gas thruster. However, the data obtained using the LVDT deviate significantly from that of the laser sensor when operating two varieties of plasma thrusters: a radio frequency (RF) driven plasma thruster, and a DC powered plasma thruster. Results establish that even with appropriate shielding and signal filtering the LVDT sensor is subject to plasma noise and radio frequency interactions which result in anomalous thrust readings. Experimental data show that the thrust determined using the LVDT system in a direct current plasma environment and a RF discharge is approximately a factor of three higher than the thrust values obtained using a laser sensor system for the operating conditions investigated. These findings are of significance to the electric propulsion community as LVDT sensors are often utilized in thrust measurement systems and accurate thrust measurement and the reproducibility of thrust data is key to analyzing thruster performance. Methods are proposed to evaluate system susceptibility to plasma noise and an effective filtering scheme presented for DC discharges.

  4. Electrode assemblies, plasma apparatuses and systems including electrode assemblies, and methods for generating plasma

    Science.gov (United States)

    Kong, Peter C; Grandy, Jon D; Detering, Brent A; Zuck, Larry D

    2013-09-17

    Electrode assemblies for plasma reactors include a structure or device for constraining an arc endpoint to a selected area or region on an electrode. In some embodiments, the structure or device may comprise one or more insulating members covering a portion of an electrode. In additional embodiments, the structure or device may provide a magnetic field configured to control a location of an arc endpoint on the electrode. Plasma generating modules, apparatus, and systems include such electrode assemblies. Methods for generating a plasma include covering at least a portion of a surface of an electrode with an electrically insulating member to constrain a location of an arc endpoint on the electrode. Additional methods for generating a plasma include generating a magnetic field to constrain a location of an arc endpoint on an electrode.

  5. Hydrophilic property of 316L stainless steel after treatment by atmospheric pressure corona streamer plasma using surface-sensitive analyses

    Energy Technology Data Exchange (ETDEWEB)

    Al-Hamarneh, Ibrahim, E-mail: hamarnehibrahim@yahoo.com [Department of Physics, Faculty of Science, Al-Balqa Applied University, Salt 19117 (Jordan); Pedrow, Patrick [School of Electrical Engineering and Computer Science, Washington State University, Pullman, WA 99164 (United States); Eskhan, Asma; Abu-Lail, Nehal [Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State University, Pullman, WA 99164 (United States)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Surface hydrophilic property of surgical-grade 316L stainless steel was enhanced by Ar-O{sub 2} corona streamer plasma treatment. Black-Right-Pointing-Pointer Hydrophilicity, surface morphology, roughness, and chemical composition before and after plasma treatment were evaluated. Black-Right-Pointing-Pointer Contact angle measurements and surface-sensitive analyses techniques, including XPS and AFM, were carried out. Black-Right-Pointing-Pointer Optimum plasma treatment conditions of the SS 316L surface were determined. - Abstract: Surgical-grade 316L stainless steel (SS 316L) had its surface hydrophilic property enhanced by processing in a corona streamer plasma reactor using O{sub 2} gas mixed with Ar at atmospheric pressure. Reactor excitation was 60 Hz ac high-voltage (0-10 kV{sub RMS}) applied to a multi-needle-to-grounded screen electrode configuration. The treated surface was characterized with a contact angle tester. Surface free energy (SFE) for the treated stainless steel increased measurably compared to the untreated surface. The Ar-O{sub 2} plasma was more effective in enhancing the SFE than Ar-only plasma. Optimum conditions for the plasma treatment system used in this study were obtained. X-ray photoelectron spectroscopy (XPS) characterization of the chemical composition of the treated surfaces confirms the existence of new oxygen-containing functional groups contributing to the change in the hydrophilic nature of the surface. These new functional groups were generated by surface reactions caused by reactive oxidation of substrate species. Atomic force microscopy (AFM) images were generated to investigate morphological and roughness changes on the plasma treated surfaces. The aging effect in air after treatment was also studied.

  6. Modification of acidity of Mo-Fe/HZSM-5 zeolite via argon plasma treatment

    Institute of Scientific and Technical Information of China (English)

    Xinli ZHU; Kailu YU; Dangguo CHENG; Yueping ZHANG; Qing XIA; Changjun LIU

    2008-01-01

    The NH3-TPD characterization was conducted to confirm that the acidity of Mo-Fe/HZSM-5 zeolite could be selectively modified via the glow discharge plasma treatment. The plasma catalyst treatment could totally change the distribution of aromatic products with higher methane conversion compared to the untreated catalyst. Some polycyclic aromatics such as anthracene, pyrene and phenanthrene were also produced over the plasma treated catalyst, in addition to benzene, toluene and naphthalene, which were normally obtained over the untreated catalyst.

  7. Continuous, saturation, and discontinuous tokamak plasma vertical position control systems

    Energy Technology Data Exchange (ETDEWEB)

    Mitrishkin, Yuri V., E-mail: y_mitrishkin@hotmail.com [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Pavlova, Evgeniia A., E-mail: janerigoler@mail.ru [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Kuznetsov, Evgenii A., E-mail: ea.kuznetsov@mail.ru [Troitsk Institute for Innovation and Fusion Research, Moscow 142190 (Russian Federation); Gaydamaka, Kirill I., E-mail: k.gaydamaka@gmail.com [V. A. Trapeznikov Institute of Control Sciences of the Russian Academy of Sciences, Moscow 117997 (Russian Federation)

    2016-10-15

    Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.

  8. Environmental plasma-catalysis for the energy-efficient treatment of volatile organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Trinh, Quang Hung; Mok, Young Sun [Jeju National University, Jeju (Korea, Republic of)

    2016-03-15

    Nonthermal plasma (NTP) coupled with catalysis is a promising technique for the abatement of dilute volatile organic compounds (VOCs), because it is operable under mild reaction conditions, i.e., low temperature and atmospheric pressure. This review addresses the mechanistic aspects of catalyst activation by NTP, such as the generation and fixation of reactive species, facilitation of redox cycles, photocatalysis, and local heating, to clarify the combined effects of plasma and catalysis. The plasma-catalytic removal of VOCs preferentially requires the catalyst to have a large specific surface area, high surface oxygen storage capacity, and to be highly reducible. The energy consumption and deactivation of catalysts are considered by comparing continuous and cyclic operations in terms of specific input energy, VOC removal and energy efficiencies, and byproduct formation. Based on the information in the literature, a plasma-catalytic system operating in cyclic adsorption-oxidation mode is recommended for the treatment of air contaminated by dilute VOCs. Finally, the effects of NTP on the regeneration of deactivated catalysts are also discussed.

  9. A new concept of high flow rate non-thermal plasma reactor for air treatment

    Energy Technology Data Exchange (ETDEWEB)

    Goujard, V.; Tatibouet, J.M. [Univ. de Poitiers, Poitiers (France). Centre national de la recherche scientifique, Laboratoire de Catalyse en Chimie Organique

    2010-07-01

    Although several non-thermal plasma reactors have been tested for air treatment at the laboratory scale, up-scaling to pilot or industrial scale remains a challenge because several parameters must be considered, such as hydrodynamic behaviour, maximum voltage in an industrial environment, and maintenance of the system. This paper presented a newly developed reactor which consists to a DBD plasma generated on individual supports that could be directly inserted in gas pipes where air flow must be treated. Elimination of 40 percent of 15 ppm of propene was obtained with a energy density as low as 10 J/L. The propene conversion increased when a manganese oxide based catalyst was used because the ozone produced by the plasma was used as an as an oxidant. A simple model of the plasma-catalyst reactor behaviour showed that more than 90 percent of propene conversion can be expected for an input energy density of 10 J/L and residual ozone concentration less than 100 ppb.

  10. Wettability and Aging of Polymer Substrates after Atmospheric Dielectrical Barrier Discharge Plasma on Demand Treatment

    NARCIS (Netherlands)

    R.A.F. Verkuijlen; Dr Jan Bernards; R. Aben; ir Martijn van Dongen

    2013-01-01

    Plasma treatment is a commonly used technology to modify the wetting behavior of polymer films in the production process for, e.g., printed electronics. As the effect of the plasma treatment decreases in time, the so-called "aging effect", it is important to gain knowledge on how this effect impacts

  11. Wettability and Aging of Polymer Substrates after Atmospheric Dielectrical Barrier Discharge Plasma on Demand Treatment

    NARCIS (Netherlands)

    Dongen, M.H.A. van; Verkuijlen, R.A.F.; Aben, R.; Bernards, J.P.C.

    2013-01-01

    Plasma treatment is a commonly used technology to modify the wetting behavior of polymer films in the production process for, e.g., printed electronics. As the effect of the plasma treatment decreases in time, the so-called "aging effect", it is important to gain knowledge on how this effect impacts

  12. Complement activation in plasma before and after infliximab treatment in Crohn disease

    DEFF Research Database (Denmark)

    Zimmermann-Nielsen, E; Agnholt, J; Thorlacius-Ussing, O

    2003-01-01

    BACKGROUND: Crohn disease is characterized by up-regulated intestinal inflammation mainly caused by increased tumour necrosis factor alpha (TNF-alpha) levels. However, the complement system (C) may also have a role in maintaining inflammation. METHODS: Plasma from 26 patients with Crohn disease...... complicated by fistulizing ano-rectal disease was collected before and after three Infliximab infusions (5 mg kg(-1)). RESULTS: Before treatment, the C3-activation capacities (C3-AC) in plasma from patients with Crohn disease were comparable with values obtained from healthy controls. The classical C pathway......-mediated C3-AC, mannan-binding lectin C4-AC, leucocyte count, C-reactive protein concentration and Crohn Disease Activity Index decreased significantly 8 weeks after the first infusion of Infliximab (P

  13. Plasma process for thermal treatment of hazardous waste; Plasmaverfahren zur thermischen Behandlung von Sondermuell

    Energy Technology Data Exchange (ETDEWEB)

    Hebecker, D.; Bendix, D. [Univ. Halle-Wittenberg, Halle (Germany). Inst. fuer Thermodynamik, Energietechnik und Stroemungsmechanik

    1998-11-01

    Plasma technology is on its way to a breakthrough in the treatment of solid, gaseous and liquid hazardous waste. Plasma gases best suited for toxic organic materials are mixtures of water vapour and air as they have optimum material and energetic characteristics. Multiburner systems ensure intensive mixing and an optimum temperature profile inside the reactor. The reactor axis is free for introducing waste materials. [Deutsch] Die Plasmatechnologie hat in den letzten Jahren speziell in der Abproduktentsorgung einen unverkennbaren Aufschwung erfahren. Das gilt sowohl fuer die Bearbeitung von problembehafteten festen Rueckstaenden, Asbest und (radioaktiven) Abfaellen als auch von gasfoermigem und fluessigem toxischen, meist organischem Sondermuell. Als Plasmagase eignen sich, speziell fuer die Zersetzung von organischen toxischen Abfallstoffen, Gemische aus Wasserdampf und Luft auf Grund der Kombination von stofflichen und energetischen Eigenschaften besonders. Mit Mehrbrennersystemen kann eine intensive Durchmischung und ein ausgeglichenes Temperaturprofil im Reaktor erzielt werden. Damit wird die Reaktorachse frei fuer die Abproduktzufuehrung. (orig.)

  14. Observation of Vortex Patterns in a Magnetized Dusty Plasma System

    Institute of Scientific and Technical Information of China (English)

    HUANG Feng; YE Maofu; WANG Long; LIU Yanhong

    2007-01-01

    Vortex patterns of dust particles have been observed in a magnetized dusty plasma system. The formation mechanism of two-dimensional (2D) vortex patterns has been investigated by analysing the forces acting on dust particles and molecular dynamics (MD) simulations in a 2D confined magnetized dusty plasma. It has been found that with a weak confining electric field and a strong magnetic field, the particles' trajectories will form a vortex shape. The simulation results agree with our experimental observations. In our experiments, vortex patterns can be induced via circular rotation of particles by changing the rf (radio-frequency) power in a magnetized dusty plasma.

  15. Surface modification of carbon nanohorns by helium plasma and ozone treatments

    Science.gov (United States)

    Lin, Zaw; Iijima, Toru; Selvam Karthik, Paneer; Yoshida, Mitsunobu; Hada, Masaki; Nishikawa, Takeshi; Hayashi, Yasuhiko

    2017-01-01

    In this paper, we describe the effects of helium plasma and ozone treatments on the dispersibility of carbon nanohorns (CNHs) in water. The experimental setups have been designed to efficiently generate helium plasma and ozone by dielectric barrier discharge at atmospheric pressure. After being treated with ozone, the oxygen-containing functional groups were introduced to the surface of CNHs, and are responsible for better dispersion. Helium plasma treatment was performed separately and it resulted in hydroxyl functional groups on the surface of CNHs. It was also found that the sizes of CNHs in water were smaller after ozone treatment. However, plasma-treated CNHs were bigger than ozone treated CNHs. The dispersed CNHs modified by ozone treatment were stable for more than three months without precipitation. In contrast, though helium plasma treatment introduced hydroxyl groups to the surface of CNHs, the dispersibility decreased and the flocculation of CNHs was observed in a few minutes.

  16. Effects of atmospheric air plasma treatment of graphite and carbon felt electrodes on the anodic current from Shewanella attached cells.

    Science.gov (United States)

    Epifanio, Monica; Inguva, Saikumar; Kitching, Michael; Mosnier, Jean-Paul; Marsili, Enrico

    2015-12-01

    The attachment of electrochemically active microorganisms (EAM) on an electrode is determined by both the chemistry and topography of the electrode surface. Pre-treatment of the electrode surface by atmospheric air plasma introduces hydrophilic functional groups, thereby increasing cell attachment and electroactivity in short-term experiments. In this study, we use graphite and carbon felt electrodes to grow the model EAM Shewanella loihica PV-4 at oxidative potential (0.2 V vs. Ag/AgCl). Cell attachment and electroactivity are measured through electrodynamic methods. Atmospheric air plasma pre-treatment increases cell attachment and current output at graphite electrodes by 25%, while it improves the electroactivity of the carbon felt electrodes by 450%. Air plasma pre-treatment decreased the coulombic efficiency on both carbon felt and graphite electrodes by 60% and 80%, respectively. Microbially produced flavins adsorb preferentially at the graphite electrode, and air plasma pre-treatment results in lower flavin adsorption at both graphite and carbon felt electrodes. Results show that air plasma pre-treatment is a feasible option to increase current output in bioelectrochemical systems.

  17. Effect of plasma treatment on the performance of two drug-loaded hydrogel formulations for therapeutic contact lenses.

    Science.gov (United States)

    Paradiso, Patrizia; Chu, Virginia; Santos, Luís; Serro, Ana Paula; Colaço, Rogério; Saramago, Benilde

    2015-07-01

    Although the plasma technology has long been applied to treat contact lenses, the effect of this treatment on the performance of drug-loaded contact lenses is still unclear. The objective of this work is to study the effect of nitrogen plasma treatment on two drug-loaded polymeric formulations which previously demonstrated to be suitable for therapeutic contact lenses: a poly-hydroxyethylmethacrylate (pHEMA) based hydrogel loaded with levofloxacin and a silicone-based hydrogel loaded with chlorhexidine. Modifications of the surface and the optical properties, and alterations in the drug release profiles and possible losses of the antimicrobial activities of the drugs induced by the plasma treatment were assessed. The results showed that, depending on the system and on the processing conditions, the plasma treatment may be beneficial for increasing wettability and refractive index, without degrading the lens surface. From the point of view of drug delivery, plasma irradiation at moderate power (200 W) decreased the initial release rate and the amount of released drug, maintaining the drug activity. For lower (100 W) and higher powers (300 W), almost no effect was detected because the treatment was, respectively, too soft and too aggressive for the lens materials.

  18. Three Filtered Vacuum Arc Plasma Sources Deposition & Implantation System

    Institute of Scientific and Technical Information of China (English)

    WU Xian-ying; ZHANG Hui-xing; LI Qiang

    2004-01-01

    A deposition & implantation system, which includes three filtered vacuum arc plasma sources, has been built. Vacuum arc discharge is used to produce high-density metal plasma; Curved magnetic filtering technique is used to transfer the plasma into out-of-sight vacuum chamber and reduce macro-particles from the vacuum arc plasma in order to drastically reduce the macro-particles contamination of the films. The up to 30 kV negative bias applied to the target can be used for ion implantation in order to improve the film adhesion; or for ion sputtering to clear the substrate surface. The 0 to 300 V negative bias can be used to adjust the ion energy which forming films. The system is designed for various thin films synthesizing, such as single-layer, compound layer, multi-layer films. It's principle, components and applications are described in the literature.

  19. The Use of Solvent/Detergent Treatment in Pathogen Reduction of Plasma.

    Science.gov (United States)

    Hellstern, Peter; Solheim, Bjarte G

    2011-01-01

    The solvent/detergent (SD) process used for plasma can safely inactivate all lipid-enveloped viruses. The introduction of a specific prion-binding ligand gel in combination with SD treatment, time-reduced from 4 to 1-1.5 h, still ensures efficient virus kill, reduces abnormal prion protein by >5 log steps, and preserves levels of plasmin inhibitor at close to the reference range. Infections with known non-enveloped viruses such as HAV or parvovirus B19 are prevented by ensuring low virus loads in the starting plasma units, dilution through pooling of single plasma units, and neutralization of immune antibodies already present in the initial plasma pools. The major advantages of SD plasma over fresh frozen plasma and the other pathogen-inactivated plasmas are its extreme safety with respect to transfusion-related acute lung injury and the significantly lower likelihood of provoking allergic reactions. Both advantages are best interpreted as results of the dilution effect of pooling. No fewer than 18 clinical studies covering all indications for plasma, and extensive clinical experience have shown that reduced levels of coagulation factors and inhibitors as a result of SD treatment do not impair significantly the clinical efficacy or tolerance of plasma. Properly standardized clotting factor and inhibitor potencies and low batch-to-batch variations when compared with single-donor plasma units makes SD plasma more suitable for standardized treatment.

  20. Onset of normal and inverse homoclinic bifurcation in a double plasma system near a plasma fireball

    Energy Technology Data Exchange (ETDEWEB)

    Mitra, Vramori; Sarma, Bornali; Sarma, Arun [VIT University Chennai Campus, Vandalur-Kelambakkam Road, Chennai-600127, Tamil Nadu (India); Janaki, M. S.; Sekar Iyengar, A. N. [Plasma Physics Division, Saha Institute of Nuclear Physics, 1/AF, Bidhannagar, Kolkata 700064 (India)

    2016-03-15

    Plasma fireballs are generated due to a localized discharge and appear as a luminous glow with a sharp boundary, which suggests the presence of a localized electric field such as electrical sheath or double layer structure. The present work reports the observation of normal and inverse homoclinic bifurcation phenomena in plasma oscillations that are excited in the presence of fireball in a double plasma device. The controlling parameters for these observations are the ratio of target to source chamber (n{sub T}/n{sub S}) densities and applied electrode voltage. Homoclinic bifurcation is noticed in the plasma potential fluctuations as the system evolves from narrow to long time period oscillations and vice versa with the change of control parameter. The dynamical transition in plasma fireball is demonstrated by spectral analysis, recurrence quantification analysis (RQA), and statistical measures, viz., skewness and kurtosis. The increasing trend of normalized variance reflects that enhancing n{sub T}/n{sub S} induces irregularity in plasma dynamics. The exponential growth of the time period is strongly indicative of homoclinic bifurcation in the system. The gradual decrease of skewness and increase of kurtosis with the increase of n{sub T}/n{sub S} also reflect growing complexity in the system. The visual change of recurrence plot and gradual enhancement of RQA variables DET, L{sub max}, and ENT reflects the bifurcation behavior in the dynamics. The combination of RQA and spectral analysis is a clear evidence that homoclinic bifurcation occurs due to the presence of plasma fireball with different density ratios. However, inverse bifurcation takes place due to the change of fireball voltage. Some of the features observed in the experiment are consistent with a model that describes the dynamics of ionization instabilities.

  1. Onset of normal and inverse homoclinic bifurcation in a double plasma system near a plasma fireball

    Science.gov (United States)

    Mitra, Vramori; Sarma, Bornali; Sarma, Arun; Janaki, M. S.; Sekar Iyengar, A. N.

    2016-03-01

    Plasma fireballs are generated due to a localized discharge and appear as a luminous glow with a sharp boundary, which suggests the presence of a localized electric field such as electrical sheath or double layer structure. The present work reports the observation of normal and inverse homoclinic bifurcation phenomena in plasma oscillations that are excited in the presence of fireball in a double plasma device. The controlling parameters for these observations are the ratio of target to source chamber (nT/nS) densities and applied electrode voltage. Homoclinic bifurcation is noticed in the plasma potential fluctuations as the system evolves from narrow to long time period oscillations and vice versa with the change of control parameter. The dynamical transition in plasma fireball is demonstrated by spectral analysis, recurrence quantification analysis (RQA), and statistical measures, viz., skewness and kurtosis. The increasing trend of normalized variance reflects that enhancing nT/nS induces irregularity in plasma dynamics. The exponential growth of the time period is strongly indicative of homoclinic bifurcation in the system. The gradual decrease of skewness and increase of kurtosis with the increase of nT/nS also reflect growing complexity in the system. The visual change of recurrence plot and gradual enhancement of RQA variables DET, Lmax, and ENT reflects the bifurcation behavior in the dynamics. The combination of RQA and spectral analysis is a clear evidence that homoclinic bifurcation occurs due to the presence of plasma fireball with different density ratios. However, inverse bifurcation takes place due to the change of fireball voltage. Some of the features observed in the experiment are consistent with a model that describes the dynamics of ionization instabilities.

  2. [Treatment of corneal ulcers with platelet rich plasma].

    Science.gov (United States)

    Acosta, L; Castro, M; Fernandez, M; Oliveres, E; Gomez-Demmel, E; Tartara, L

    2014-02-01

    To assess the efficacy of platelet rich plasma (PRP) in the treatment of extensive corneal ulcers in albino rabbits. New Zealand rabbits, divided in 3 groups, were used for the study. Corneal ulcers of 10mm diameter were made. Rabbits blood was extracted for the preparation of the PRP of the corresponding group. The blood was processed by differential centrifugation. The first group, named control, was treated with sterile saline every 8h. The second group, named gel, was treated with deproteinized extract gel beef fat every 8h, and the third group, named PRP received one PRP drop on the first and third day of monitoring. The rabbits were monitored, by taking photographs, each day for the 7 days that the study lasted. A better outcome was observed in the group with deproteinized extract gel beef fat (GE group), and the PRP group (PL group), in comparison with the control group (CO group) (P<.05). The PRP showed to be just as effective as the commercial product (Solcoseryl®), for the regeneration of the extensive and deep corneal ulcers. Besides, it stands out as a no surgical procedure is required, and there is easy access, low cost and reduced doses. Copyright © 2013 Sociedad Española de Oftalmología. Published by Elsevier Espana. All rights reserved.

  3. Antibacterial treatment of LDPE with halogen derivatives via cold plasma

    Directory of Open Access Journals (Sweden)

    A. Popelka

    2015-05-01

    Full Text Available The factor limiting the application of low-density polyethylene (LDPE in healthcare is its high susceptibility to bacterial growth. For this reason, we here investigated antibacterial treatments of LDPE foils using appropriate antibacterial agents. Benzalkonium chloride and bronopol were selected because of their satisfactory antibacterial effect, which has been confirmed by their application in the medical and cosmetic industries. The aforementioned substances were immobilized by a multistep approach via the grafting of polyacrylic acid (PAA brushes onto LDPE surfaces pre-treated with low-temperature plasma. Measurements of the surface energy, peel strength of the adhesive joints, X-ray photoelectron spectroscopy (XPS, Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR, and atomic force micro scopy (AFM were used to investigate the surface and adhesive properties of the antibacterial-treated LDPE. Moreover, the antibacterial effect was determined via measurements of the inhibition zone of the Staphylococcus aureus (S. aureus bacterial strain. The antibacterial activity of benzalkonium chloride was observed to be more pronounced than that of bronopol. Inhibition-zone measurements of Escherichia coli (E. coli were also conducted, but an antibacterial effect was not observed.

  4. PLATELET-RICH PLASMA (PRP FOR THE TREATMENT OF PROBLEMATIC SKIN WOUNDS

    Directory of Open Access Journals (Sweden)

    Tsvetan Sokolov

    2016-12-01

    Full Text Available OBJECTIVE: To show platelet-rich plasma (PRP application of problematic skin wounds and to evaluate the results from the treatment. MATERIAL AND METHODS: A total of 31 patients with problematic skin wounds had been treated at the clinic for a period of five years (from May 2010 to September 2015 with the following patient sex ratio: male patients– 13 and female patients– 18. Average age– 46,5 (22-82. Patients with Type 2 Diabetes– 10, with decubitus ulcers– 2, traumatic– 29, with infection– 12, acute– 15, chronic– 16. Based on a scheme developed by us, all cases were treated by administering platelet-rich plasma, derived by PRGF Endoret system. Follow-up period was within 4 – 6 months (4,5 on average. We used platelet rich plasma derived by PRGF Endoret system, applied on the wound bed on a weekly basis. RESULTS: The results have been evaluated based on the following functional scoring systems - Total wound score, Total anatomic score and Total score (20. The baseline values at the very beginning of the follow-up period were as follows: Total wound score – 10 p.; Total anatomic score – 8 p., Total score – 15 p. By the end of the treatment period the score was 0 p., which means excellent results, i.e. complete healing of the wounds. CONCLUSION: We believe that the application of PRP may become optimal therapy in the treatment of difficult to heal wounds around joints, bone, subject tendons, plantar surface of the foot, etc., as it opens new perspectives in the field of human tissue regeneration.

  5. Disinfection of fresh chicken breast fillets with in-package atmospheric cold plasma: effect of treatment voltage and time

    Science.gov (United States)

    Effects of treatment voltage and time of in-package atmospheric cold plasma (ACP) were studied on ozone formation, microbiological quality, surface color, and pH of fresh chicken fillets. Samples were sealed in food trays in air, treated with a dielectric-barrier-discharge (DBD) ACP system, and stor...

  6. New developments in surface functionalization of polymers using controlled plasma treatments

    Science.gov (United States)

    Vesel, Alenka; Mozetic, Miran

    2017-07-01

    We are presenting recent advances in surface functionalization of materials such as functional polymers using gaseous plasma treatments. Functionalization is a result of chemical interaction between solid materials and reactive plasma species including charged particles, neutral radicals, excited species and UV radiation. The degree of surface functionalization depends on the type of polymers and fluxes of reactive plasma species. An appropriate choice of plasma parameters thus enables almost arbitrary tailoring of the surface wettability. This review paper gives a brief introduction to the formation of reactive gaseous species upon plasma conditions in different discharge configurations and describes plasma-surface interaction with an emphasis on the differences between different reactive plasma species. Analysis of the relevant literature is given and correlations between treatment parameters and surface finish are drawn. Numerous authors have used plasma treatment for modification of the surface functionalities, however, the obtained surface properties often differ even for the same materials. The reason for such diverse results is the application of various gaseous discharges for plasma generation. Apart from the type and amount of functional groups induced by plasma treatment, the surface functionality depends also on the surface morphology on the sub-micron scale; therefore, this effect is stressed as well. Finally, some future guidelines are given.

  7. Improvement of Surface Wettability and Hydrophilization of Poly-paraphenylene benzobisoxazole Fiber with Fibrillation Combined Oxygen Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Xiwen Wang

    2012-01-01

    Full Text Available A new surface modification method fibrillation combined with oxygen plasma treatment to improve the wettability and hydrophily of PBO fiber was studied in this paper. The surface chemical structure and morphology of PBO fiber were characterized by the methods of FTIR, XPS and SEM. The wettability and hydrophlic characters changes on the surface were evaluated by the dynamic contact angle system and image analysis. The results show that the increase surface roughness by fibrillation could improve the wettability. Fibrillation combined oxygen plasma treatment has a better effect than oxygen plasma treatment to improve the wettability and hdyrophlization of PBO fiber. The specific area of PBO fiber increased to 10.7 m2/g from 0.7 m2/g, contact angle decreased to 43.2° from 84.4° and WRV increased to 208.4% from 13.7%. The modified fibers have a good dispersion in water for hydrophilization improvement.

  8. Effects of oxygen plasma treatment power on surface properties of poly(p-phenylene benzobisoxazole) fibers

    Energy Technology Data Exchange (ETDEWEB)

    Chen Ping [State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, School of Chemical Engineering, Dalian University of Technology, Dalian 116012 (China) and Liaoning Key Laboratory of Advanced Polymer Matrix Composites Manufacturing Technology, Shenyang Institute of Aeronautical Engineering, Shenyang 110034 (China)], E-mail: chenping_898@126.com; Zhang Chengshuang; Zhang Xiangyi [State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, School of Chemical Engineering, Dalian University of Technology, Dalian 116012 (China); Wang Baichen; Li Wei [Liaoning Key Laboratory of Advanced Polymer Matrix Composites Manufacturing Technology, Shenyang Institute of Aeronautical Engineering, Shenyang 110034 (China); Lei Qingquan [State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, School of Chemical Engineering, Dalian University of Technology, Dalian 116012 (China)

    2008-12-30

    The effects of oxygen plasma treatment power on surface properties of poly(p-phenylene benzobisoxazole) (PBO) fibers were investigated. Surface chemical composition, surface roughness and surface morphologies of PBO fibers were analyzed by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM), respectively. Surface free energy of the fibers was characterized by dynamic contact angle analysis (DCAA). The results indicated that the oxygen plasma treatment introduced some polar groups to PBO fiber surfaces, enhanced surface roughness and changed surface morphologies of PBO fibers by plasma etching and oxidative reactions. The polar groups and surface free energy of PBO fibers were significantly improved by the oxygen plasma treatment when the plasma treatment power was lower than 200 W. However, these two parameters degraded as the plasma treatment power went up to 300 and 400 W. PBO fibers were notably roughened by the oxygen plasma treatment. Surface morphologies of the fibers became more complicated, and surface roughness of the fibers enhanced almost linearly with the plasma treatment power increasing.

  9. Improvement of silicon direct bonding using surfaces activated by hydrogen plasma treatment

    CERN Document Server

    Choi, W B; Lee Jae Sik; Sung, M Y

    2000-01-01

    The plasma surface treatment, using hydrogen gas, of silicon wafers was studied as a pretreatment for silicon direct bonding. Chemical reactions of the hydrogen plasma with the surfaces were used for both surface activation and removal of surface contaminants. Exposure of the silicon wafers to the plasma formed an active oxide layer on the surface. This layer was hydrophilic. The surface roughness and morphology were examined as functions of the plasma exposure time and power. The surface became smoother with shorter plasma exposure time and lower power. In addition, the plasma surface treatment was very efficient in removing the carbon contaminants on the silicon surface. The value of the initial surface energy, as estimated by using the crack propagation method, was 506 mJ/M sup 2 , which was up to about three times higher than the value for the conventional direct bonding method using wet chemical treatments.

  10. Plasma transport simulation modeling for helical confinement systems

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, K.; Amano, T.

    1991-08-01

    New empirical and theoretical transport models for helical confinement systems are developed based on the neoclassical transport theory including the effect of radial electric field and multi-helicity magnetic components, and the drift wave turbulence transport for electrostatic and electromagnetic modes, or the anomalous semi-empirical transport. These electron thermal diffusivities are compared with CHS (Compact Helical System) experimental data, which indicates that the central transport coefficient of the ECH plasma agrees with the neoclassical axi-symmetric value and the transport outside the half radius is anomalous. On the other hand, the transport of NBI-heated plasmas is anomalous in the whole plasma region. This anomaly is not explained by the electrostatic drift wave turbulence models in these flat-density-profile discharges. For the detailed prediction of plasma parameters in LHD (Large Helical Device), 3-D(dimensional) equilibrium/1-D transport simulations including empirical or drift wave turbulence models are carried out, which suggests that the global confinement time of LHD is determined mainly by the electron anomalous transport near the plasma edge region rather than the helical ripple transport in the core region. Even if the ripple loss can be eliminated, the increase of the global confinement is 10%. However, the rise in the central ion temperature is more than 20%. If the anomalous loss can be reduced to the half level of the present scaling, like so-called `H-mode` of the tokamak discharge, the neoclassical ripple loss through the ion channel becomes important even in the plasma core. The 5% radial inward shift of the plasma column with respect to the major radius is effective for improving plasma confinement and raising more than 50% of the fusion product by reducing this neoclassical asymmetric ion transport loss and increasing 10% in the plasma radius. (author).

  11. CLINICAL RESULTS FROM THE TREATMENT OF CHRONIC SKIN WOUNDS WITH PLATELET RICH PLASMA (PRP

    Directory of Open Access Journals (Sweden)

    Pencho Kossev

    2015-12-01

    Full Text Available PURPOSE: To show platelet rich plasma (PRP application of chronic skin wounds and to evaluate the results from the treatment. MATERIAL AND METHODS: A total of 14 patients with problematic skin wounds had been treated at the clinic for a period of five years (from May 2009 to December 2014 with the following patient sex ratio: male patients - 5 and female patients - 9. Average age - 48,5 (30-76. Patients with Type 2 Diabetes - 4, with decubitus ulcers - 6, traumatic - 8, with infection - 5. Based on a scheme developed by us, all cases were treated by administering platelet-rich plasma, derived by PRGF Endoret system. Follow-up period was within 4 - 6 months (4,5 on average. RESULTS: The results have been evaluated based on the following functional scoring systems - Total wound score, Total anatomic score and Total score (20. The baseline values at the very beginning of the follow-up period were as follows: Total wound score - 12 p.; Total anatomic score - 10 p., Total score - 17 p. By the end of the treatment period the score was 0 p., which means excellent results, i.e. complete healing of the wounds. CONCLUSION: We believe that the application of PRP may become optimal therapy in the treatment of difficult to heal wounds around joints, bone, subject tendons, plantar surface of the foot, etc., as it opens new perspectives in the field of human tissue regeneration.

  12. Kinetics of post-treatment structural transformations of nitrogen plasma ion immersion implanted polystyrene

    Energy Technology Data Exchange (ETDEWEB)

    Kosobrodova, E., E-mail: elenak@physics.usyd.edu.au; Kondyurin, A.; McKenzie, D.R.; Bilek, M.M.M.

    2013-06-01

    The surface chemistry of a synthetic material in contact with a biological system has a strong influence on the adhesion of proteins to the surface of the material and requires careful consideration in biomedical applications. The structure of plasma immersion ion implantation (PIII) treated polymer and its surface free energy depend on the ion fluence delivered during the treatment and on the time after the PIII treatment. These dependences have been investigated using the example of nitrogen plasma implanted polystyrene (PS). Contact angle measurements, FTIR–ATR spectra and X-ray photoelectron (XPS) spectra were acquired as a function of ion fluence and time after treatment. The results showed a close relationship to the kinetics of free radicals that had been examined in a previous study. The kinetics of oxidation and surface free energy had two stages, one with a characteristic time of several hours and the other with a characteristic time of several days. The concentration of nitrogen-containing groups decreased with time after PIII treatment, partly, due to their release from the PS surface.

  13. Automatization of hardware configuration for plasma diagnostic system

    Science.gov (United States)

    Wojenski, A.; Pozniak, K. T.; Kasprowicz, G.; Kolasinski, P.; Krawczyk, R. D.; Zabolotny, W.; Linczuk, P.; Chernyshova, M.; Czarski, T.; Malinowski, K.

    2016-09-01

    Soft X-ray plasma measurement systems are mostly multi-channel, high performance systems. In case of the modular construction it is necessary to perform sophisticated system discovery in parallel with automatic system configuration. In the paper the structure of the modular system designed for tokamak plasma soft X-ray measurements is described. The concept of the system discovery and further automatic configuration is also presented. FCS application (FMC/ FPGA Configuration Software) is used for running sophisticated system setup with automatic verification of proper configuration. In order to provide flexibility of further system configurations (e.g. user setup), common communication interface is also described. The approach presented here is related to the automatic system firmware building presented in previous papers. Modular construction and multichannel measurements are key requirement in term of SXR diagnostics with use of GEM detectors.

  14. Laser-produced plasma source system development

    Science.gov (United States)

    Fomenkov, Igor V.; Brandt, David C.; Bykanov, Alexander N.; Ershov, Alexander I.; Partlo, William N.; Myers, David W.; Böwering, Norbert R.; Vaschenko, Georgiy O.; Khodykin, Oleh V.; Hoffman, Jerzy R.; Vargas L., Ernesto; Simmons, Rodney D.; Chavez, Juan A.; Chrobak, Christopher P.

    2007-03-01

    This paper describes the development of laser produced plasma (LPP) technology as an EUV source for advanced scanner lithography applications in high volume manufacturing. EUV lithography is expected to succeed 193 nm immersion technology for critical layer patterning below 32 nm beginning with beta generation scanners in 2009. This paper describes the development status of subsystems most critical to the performance to meet joint scanner manufacturer requirements and semiconductor industry standards for reliability and economic targets for cost of ownership. The intensity and power of the drive laser are critical parameters in the development of extreme ultraviolet LPP lithography sources. The conversion efficiency (CE) of laser light into EUV light is strongly dependent on the intensity of the laser energy on the target material at the point of interaction. The total EUV light generated then scales directly with the total incident laser power. The progress on the development of a short pulse, high power CO2 laser for EUV applications is reported. The lifetime of the collector mirror is a critical parameter in the development of extreme ultra-violet LPP lithography sources. The deposition of target materials and contaminants, as well as sputtering of the collector multilayer coating and implantation of incident particles can reduce the reflectivity of the mirror substantially over the exposure time even though debris mitigation schemes are being employed. The results of measurements of high energy ions generated by a short-pulse CO2 laser on a laser-produced plasma EUV light source with Sn target are presented. Droplet generation is a key element of the LPP source being developed at Cymer for EUV lithography applications. The main purpose of this device is to deliver small quantities of liquid target material as droplets to the laser focus. The EUV light in such configuration is obtained as a result of creating a highly ionized plasma from the material of the

  15. Evaluation of pulsed corona discharge plasma for the treatment of petroleum-contaminated soil.

    Science.gov (United States)

    Li, Rui; Liu, Yanan; Mu, Ruiwen; Cheng, Wenyan; Ognier, Stéphanie

    2017-01-01

    Petroleum hydrocarbons released to the environment caused by leakage or illegal dumping pose a threat to human health and the natural environment. In this study, the potential of a pulsed corona discharge plasma system for treating petroleum-polluted soils was evaluated. This system removed 76.93 % of the petroleum from the soil in 60 min with an energy efficiency of 0.20 mg/kJ. Furthermore, the energy and degradation efficiencies for the remediation of soil contaminated by single polyaromatic hydrocarbons, such as phenanthrene and pyrene, were also compared, and the results showed that this technology had potential in organic-polluted soil remediation. In addition, the role of water molecules was investigated for their direct involvement in the formation and transportation of active species. The increase of soil moisture to a certain extent clearly benefitted degradation efficiency. Then, treated soils were analyzed by FTIR and GC-MS for proposing the degradation mechanism of petroleum. During the plasma discharging processes, the change of functional group and the detection of small aromatic hydrocarbons indicated that the plasma active species attached petroleum hydrocarbons and degradation occurred. This technique reported herein demonstrated significant potential for the remediation of heavily petroleum-polluted soil, as well as for the treatment of organic-polluted soils.

  16. Frequency of cell treatment with cold microwave argon plasma is important for the final outcome

    Science.gov (United States)

    Sysolyatina, E.; Vasiliev, M.; Kurnaeva, M.; Kornienko, I.; Petrov, O.; Fortov, V.; Gintsburg, A.; Petersen, E.; Ermolaeva, S.

    2016-07-01

    The purpose of this work was to establish the influence of a regime of cold microwave argon plasma treatments on the physiological characteristics of human fibroblasts and keratinocytes. We used three regimes of plasma application: a single treatment, double treatment with a 48 h interval, and daily treatments for 3 d. Cell proliferation after plasma application was quantified in real time, and immunohistochemistry was used to establish the viability of the cells and determine changes in their physiology. It was established that the frequency of cell treatments is important for the outcome. In the samples treated with single plasma application and double plasma applications with a 48 h interval, a 42.6% and 32.0% increase was observed in the number of cells, respectively. In addition, there were no signs of deoxyribonucleic acid breaks immediately after plasma application. In contrast, plasma application increased the accumulation of cells in the active phases of the cell cycle. The activation of proliferation correlated with a decrease in the level of β-galactosidase, a senescence marker. This could be due to cell renovation after plasma application. Daily treatment decreased cell proliferation up to 29.1% in comparison with the control after 3 d.

  17. Influence of ethylene glycol pretreatment on effectiveness of atmospheric pressure plasma treatment of polyethylene fibers

    Energy Technology Data Exchange (ETDEWEB)

    Wen Ying; Li Ranxing [Key Laboratory of Textile Science and Technology (Donghua University), Ministry of Education (China); Cai Fang [Key Laboratory of Eco-Textiles (Donghua University), Ministry of Education (China); Fu Kun; Peng Shujing; Jiang Qiuran; Yao Lan [Key Laboratory of Textile Science and Technology (Donghua University), Ministry of Education (China); Qiu Yiping, E-mail: ypqiu@dhu.edu.cn [Department of Textile Materials Science and Product Design, College of Textiles, Donghua University, Shanghai 201620 (China)

    2010-03-01

    For atmospheric pressure plasma treatments, the results of plasma treatments may be influenced by liquids adsorbed into the substrate. This paper studies the influence of ethylene glycol (EG) pretreatment on the effectiveness of atmospheric plasma jet (APPJ) treatment of ultrahigh molecular weight polyethylene (UHMWPE) fibers with 0.31% and 0.42% weight gain after soaked in EG/water solution with concentration of 0.15 and 0.3 mol/l for 24 h, respectively. Scanning electron microscopy (SEM) shows that the surface of fibers pretreated with EG/water solution does not have observable difference from that of the control group. The X-ray photoelectron spectroscopy (XPS) results show that the oxygen concentration on the surface of EG-pretreated fibers is increased less than the plasma directly treated fibers. The interfacial shear strength (IFSS) of plasma directly treated fibers to epoxy is increased almost 3 times compared with the control group while that of EG-pretreated fibers to epoxy does not change except for the fibers pretreated with lower EG concentration and longer plasma treatment time. EG pretreatment reduces the water contact angle of UHMWPE fibers. In conclusion, EG pretreatment can hamper the effect of plasma treatment of UHMWPE fibers and therefore longer plasma treatment duration is required for fibers pretreated with EG.

  18. Thinning and functionalization of few-layer graphene sheets by CF4 plasma treatment

    KAUST Repository

    Shen, Chao

    2012-05-24

    Structural changes of few-layer graphene sheets induced by CF4 plasma treatment are studied by optical microscopy and Raman spectroscopy, together with theoretical simulation. Experimental results suggest a thickness reduction of few-layer graphene sheets subjected to prolonged CF4 plasma treatment while plasma treatment with short time only leads to fluorine functionalization on the surface layer by formation of covalent bonds. Raman spectra reveal an increase in disorder by physical disruption of the graphene lattice as well as functionalization during the plasma treatment. The F/CF3 adsorption and the lattice distortion produced are proved by theoretical simulation using density functional theory, which also predicts p-type doping and Dirac cone splitting in CF4 plasma-treated graphene sheets that may have potential in future graphene-based micro/nanodevices.

  19. Variation in diffusion of gases through PDMS due to plasma surface treatment and storage conditions.

    Science.gov (United States)

    Markov, Dmitry A; Lillie, Elizabeth M; Garbett, Shawn P; McCawley, Lisa J

    2014-02-01

    Polydimethylsiloxane (PDMS) is a commonly used polymer in the fabrication of microfluidic devices due to such features as transparency, gas permeability, and ease of patterning with soft lithography. The surface characteristics of PDMS can also be easily changed with oxygen or low pressure air plasma converting it from a hydrophobic to a hydrophilic state. As part of such a transformation, surface methyl groups are removed and replaced with hydroxyl groups making the exposed surface to resemble silica, a gas impermeable substance. We have utilized Platinum(II)-tetrakis(pentaflourophenyl)porphyrin immobilized within a thin (~1.5 um thick) polystyrene matrix as an oxygen sensor, Stern-Volmer relationship, and Fick's Law of simple diffusion to measure the effects of PDMS composition, treatment, and storage on oxygen diffusion through PDMS. Results indicate that freshly oxidized PDMS showed a significantly smaller diffusion coefficient, indicating that the SiO2 layer formed on the PDMS surface created an impeding barrier. This barrier disappeared after a 3-day storage in air, but remained significant for up to 3 weeks if PDMS was maintained in contact with water. Additionally, higher density PDMS formulation (5:1 ratio) showed similar diffusion characteristics as normal (10:1 ratio) formulation, but showed 60 % smaller diffusion coefficient after plasma treatment that never recovered to pre-treatment levels even after a 3-week storage in air. Understanding how plasma surface treatments contribute to oxygen diffusion will be useful in exploiting the gas permeability of PDMS to establish defined normoxic and hypoxic oxygen conditions within microfluidic bioreactor systems.

  20. Sterilization of Fusarium oxysporum by treatment of non-thermalequilibrium plasma in nutrient solution

    Science.gov (United States)

    Yasui, Shinji; Seki, Satoshi; Yoshida, Ryohei; Shoji, Kazuhiro; Terazoe, Hitoshi

    2016-01-01

    Fusarium wilt of spinach due to F. oxysporum infection is one of the most destructive root diseases in hydroponics in factories using the nutrient film technique. We investigated new technologies for the sterilization of microconidia of F. oxysporum by using a non-thermalequilibrium plasma treatment method in nutrient solution. Specifically, we investigated the sterilization capabilities of five types of gas (air, O2, N2, He, and Ar) used for plasma generation. The highest sterilization capability was achieved by using O2 plasma. However, ozone, which causes growth inhibition, was then generated and released into the atmosphere. The sterilization capability was lower when N2 or air plasma was used in the nutrient solution. It was confirmed that sterilization can be achieved by plasma treatment using inert gases that do not generate ozone; therefore, we determined that Ar plasma is the most preferable. In addition, we investigated the sterilization capabilities of other factors associated with Ar plasma generation, without direct plasma treatment. However, none of these other factors, which included Ar bubbling, pH reduction, increased temperature, hydrogen peroxide concentration, and UV radiation, could completely reproduce the results of direct plasma treatment. We assume that radicals such as O or OH may contribute significantly to the sterilization of microconidia of F. oxysporum in a nutrient solution.

  1. Plasma-mediated inactivation of Pseudomonas aeruginosa biofilms grown on borosilicate surfaces under continuous culture system.

    Directory of Open Access Journals (Sweden)

    Kurt G Vandervoort

    Full Text Available Biofilms are microbial communities attached to a surface and embedded in a matrix composed of exopolysaccharides and excreted nucleic acids. Bacterial biofilms are responsible for undesirable effects such as disease, prostheses colonization, biofouling, equipment damage, and pipe plugging. Biofilms are also more resilient than free-living cells to regular sterilization methods and therefore it is indispensable to develop better ways to control and remove them. The use of gas discharge plasmas is a good alternative since plasmas contain a mixture of reactive agents well-known for their decontamination potential against free microorganisms. We have previously reported that Pseudomonas aeruginosa biofilms were inactivated after a 1-min plasma exposure. We determined that the adhesiveness and the thickness of Pseudomonas biofilms grown on borosilicate were reduced. We also reported sequential morphological changes and loss of viability upon plasma treatment. However, the studies were carried out in batch cultures. The use of a continuous culture results in a more homogenous environment ensuring reproducible biofilm growth. The aim of this work was to study plasma-mediated inactivation of P. aeruginosa biofilms grown on borosilicate in a continuous culture system. In this paper we show that biofilms grown on glass under continuous culture can be inactivated by using gas discharge plasma. Both biofilm architecture and cell culturability are impacted by the plasma treatment. The inactivation kinetics is similar to previously described ones and cells go through sequential changes ranging from minimal modification without loss of viability at short plasma exposure times, to major structure and viability loss at longer exposure times. We report that changes in biofilm structure leading to the loss of culturability and viability are related to a decrease of the biofilm matrix adhesiveness. To our knowledge, there has been no attempt to evaluate the

  2. Plasma-mediated inactivation of Pseudomonas aeruginosa biofilms grown on borosilicate surfaces under continuous culture system.

    Science.gov (United States)

    Vandervoort, Kurt G; Brelles-Mariño, Graciela

    2014-01-01

    Biofilms are microbial communities attached to a surface and embedded in a matrix composed of exopolysaccharides and excreted nucleic acids. Bacterial biofilms are responsible for undesirable effects such as disease, prostheses colonization, biofouling, equipment damage, and pipe plugging. Biofilms are also more resilient than free-living cells to regular sterilization methods and therefore it is indispensable to develop better ways to control and remove them. The use of gas discharge plasmas is a good alternative since plasmas contain a mixture of reactive agents well-known for their decontamination potential against free microorganisms. We have previously reported that Pseudomonas aeruginosa biofilms were inactivated after a 1-min plasma exposure. We determined that the adhesiveness and the thickness of Pseudomonas biofilms grown on borosilicate were reduced. We also reported sequential morphological changes and loss of viability upon plasma treatment. However, the studies were carried out in batch cultures. The use of a continuous culture results in a more homogenous environment ensuring reproducible biofilm growth. The aim of this work was to study plasma-mediated inactivation of P. aeruginosa biofilms grown on borosilicate in a continuous culture system. In this paper we show that biofilms grown on glass under continuous culture can be inactivated by using gas discharge plasma. Both biofilm architecture and cell culturability are impacted by the plasma treatment. The inactivation kinetics is similar to previously described ones and cells go through sequential changes ranging from minimal modification without loss of viability at short plasma exposure times, to major structure and viability loss at longer exposure times. We report that changes in biofilm structure leading to the loss of culturability and viability are related to a decrease of the biofilm matrix adhesiveness. To our knowledge, there has been no attempt to evaluate the inactivation

  3. [Use of plasma technology in treatment of patients with pyo-inflammatory diseases of soft tissues].

    Science.gov (United States)

    Khasanov, A G; Nikmatsianov, S S; Nurtdinov, M A; Bakiev, I M; Men'shikov, A M; Shaĭbakov, D G

    2007-01-01

    The authors substantiated the method of treatment of pyo-inflammatory diseases based on experiments in white rats, using plasma flow at different stages of the process. The plasma technology was used in the clinic in 130 patients that allowed shortening the period of preparing the wounds to operative treatment and reducing the period of hospital stay from 15.3 to 9.2 days, improving results of treatment by 20% and saving on expensive bandaging materials and medicines.

  4. Toxic waste treatment with sliding centrifugal plasma reactor; Tratamiento de residuos toxicos con reactores de plasma centrifugo deslizante (PCD)

    Energy Technology Data Exchange (ETDEWEB)

    Pacheco, J.; Pacheco, M.; Valdivia, R.; Ramos, F.; Duran, M.; Hidalgo, M.; Cruz, A.; Martinez, J. C.; Martinez, R.; De la Cruz, S.; Flores, T.; Vidal, E.; Escobar, S. [ININ, Carretera Mexico-Toluca s/n, Ocoyoacac 52750, Estado de Mexico (Mexico); Garduno, M.; Garcia, M.; Portillo, J.; Torres, C.; Estrada, N.; Velazquez, S.; Vasquez, C. [Instituto Tecnologico de Toluca, Av. Instituto Tecnologico s/n, Ex-Rancho la Virgen, Metepec 52140, Estado de Mexico (Mexico)

    2008-07-01

    The aim is to develop technology for hazardous waste treatment, including the building and putting into operation of a prototype based on a sliding centrifugal plasma technology to demonstrate its ability to degradation taking in account the existing environmental standards. (Author)

  5. Effect of atmospheric pressure plasma treatment condition on adhesion of ramie fibers to polypropylene for composite

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ying [College of Material and Textile Engineering, Jiaxing University, Jiaxing 314033 (China); Center for Plasma-Aided Manufacturing, Madison, WI 53706 (United States); School of Human Ecology, University of Wisconsin-Madison, Madison, WI 53706 (United States); Manolache, Sorin [Center for Plasma-Aided Manufacturing, Madison, WI 53706 (United States); US Forest Products Laboratory, Madison, WI 53726 (United States); Qiu, Yiping, E-mail: ypqiu@dhu.edu.cn [College of Textiles, Donghua University, Shanghai 201620 (China); Sarmadi, Majid, E-mail: majidsar@wisc.edu [Center for Plasma-Aided Manufacturing, Madison, WI 53706 (United States); School of Human Ecology, University of Wisconsin-Madison, Madison, WI 53706 (United States); Materials Science Program, University of Wisconsin-Madison, Madison, WI 53706 (United States)

    2016-02-28

    Graphical abstract: - Highlights: • The continuous ethanol flow technique can successfully modify ramie fiber surface with an increase in IFSS value up to 50%. • Response surface methodology was applied to design the plasma treatment parameters for ramie fiber modification. • The ethanol flow rate was the most influential treatment parameter in plasma modification process. - Abstract: In order to improve the interfacial adhesion between hydrophilic ramie fibers and hydrophobic polypropylene (PP) matrices, ramie fibers are modified by atmospheric pressure dielectric barrier discharge (DBD) plasma with our continuous ethanol flow technique in helium environment. A central composite design of experiments with different plasma processing parameter combinations (treatment current, treatment time and ethanol flow rate) is applied to find the most influential parameter and to obtain the best modification effect. Field emission scanning electron microscope (SEM) shows the roughened surfaces of ramie fibers from the treated groups due to plasma etching effect. Dynamic contact angle analysis (DCAA) demonstrates that the wettability of the treated fibers drastically decreases. Microbond pullout test shows that the interfacial shear strength (IFSS) between treated ramie fibers and PP matrices increases significantly. Residual gas analysis (RGA) confirms the creation of ethyl groups during plasma treatment. This study shows that our continuous ethanol flow technique is effective in the plasma modification process, during which the ethanol flow rate is the most influential parameter but all parameters have simultaneous influence on plasma modification effect of ramie fibers.

  6. Treatment of enterococcus faecalis bacteria by a helium atmospheric cold plasma brush with oxygen addition

    Science.gov (United States)

    Chen, Wei; Huang, Jun; Du, Ning; Liu, Xiao-Di; Wang, Xing-Quan; Lv, Guo-Hua; Zhang, Guo-Ping; Guo, Li-Hong; Yang, Si-Ze

    2012-07-01

    An atmospheric cold plasma brush suitable for large area and low-temperature plasma-based sterilization is designed. Results demonstrate that the He/O2 plasma more effectively kills Enterococcus faecalis than the pure He plasma. In addition, the sterilization efficiency values of the He/O2 plasma depend on the oxygen fraction in Helium gas. The atmospheric cold plasma brush using a proper ratio of He/O2 (2.5%) reaches the optimum sterilization efficiency. After plasma treatment, the cell structure and morphology changes can be observed by the scanning electron microscopy. Optical emission measurements indicate that reactive species such as O and OH play a significant role in the sterilization process.

  7. Treatment of enterococcus faecalis bacteria by a helium atmospheric cold plasma brush with oxygen addition

    Energy Technology Data Exchange (ETDEWEB)

    Chen Wei; Huang Jun; Wang Xingquan; Lv Guohua; Zhang Guoping [Key Laboratory of Soft Matter Physics, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Science, 100190 Beijing (China); Du Ning; Liu Xiaodi; Guo Lihong [Department of Oral Biology, Peking University School and Hospital of Stomatology, 100080 Beijing (China); Yang Size [Key Laboratory of Soft Matter Physics, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Science, 100190 Beijing (China); Fujian Key Laboratory for Plasma and Magnetic Resonance, Department of Aeronautics, School of Physics and Mechanical and Electrical Engineering, Xiamen University, Xiamen 361005 (China)

    2012-07-01

    An atmospheric cold plasma brush suitable for large area and low-temperature plasma-based sterilization is designed. Results demonstrate that the He/O{sub 2} plasma more effectively kills Enterococcus faecalis than the pure He plasma. In addition, the sterilization efficiency values of the He/O{sub 2} plasma depend on the oxygen fraction in Helium gas. The atmospheric cold plasma brush using a proper ratio of He/O{sub 2} (2.5%) reaches the optimum sterilization efficiency. After plasma treatment, the cell structure and morphology changes can be observed by the scanning electron microscopy. Optical emission measurements indicate that reactive species such as O and OH play a significant role in the sterilization process.

  8. Treatment of Streptococcus mutans bacteria by a plasma needle

    Science.gov (United States)

    Zhang, Xianhui; Huang, Jun; Liu, Xiaodi; Peng, Lei; Guo, Lihong; Lv, Guohua; Chen, Wei; Feng, Kecheng; Yang, Si-ze

    2009-03-01

    A dielectric barrier discharge plasma needle was realized at atmospheric pressure with a funnel-shaped nozzle. The preliminary characteristics of the plasma plume and its applications in the inactivation of Streptococcus mutans (S. mutans), the most important microorganism causing dental caries, were presented in this paper. The temperature of the plasma plume does not reach higher than 315 K when the power is below 28 W. Oxygen was injected downstream in the plasma afterglow region through the powered steel tube. Its effect was studied via optical-emission spectroscopy, both in air and in agar. Results show that addition of 26 SCCM O2 does not affect the plume length significantly (SCCM denotes cubic centimeter per minute at STP). The inactivation of S. mutans is primarily attributed to ultraviolet light emission, O, OH, and He radicals.

  9. Plasma Adenosine Deaminase Enzyme Reduces with Treatment of ...

    African Journals Online (AJOL)

    olayemitoyin

    Plasma ADA in DSTB patients before and 6 months of chemotherapy were not significantly different compared MDR TB patients. ... Also, ADA deficiency has a direct effect on the lungs, .... showed that the patients were sputum smear negative.

  10. Improvement of durable properties of surgical textiles using plasma treatment

    OpenAIRE

    Alay, S.; Goktepe, F.; Souto, A. Pedro; Carneiro, Noémia; F Fernandes; Dias, Paula

    2007-01-01

    Nowadays one of the important plasmas used in textile industry is Corona discharge, which is applied in air at atmospheric pressure. Corona offers many advantages such as low production costs mainly due to effective energy utilization and minimum waste materials. In this study, the main focus is to use Corona plasma to produce reusable surgical fabrics with durable properties and using chemical agents at low concentrations. Therefore a new more economic production process of surgical fabri...

  11. Plasma treatment for biomedical application on polymeric substrate

    OpenAIRE

    Ziano,

    2010-01-01

    This work arises from the possibility of changing the surface properties of materials with the use of plasma. It proved to be a very good method for treating surfaces, it is in fact able to modify surface properties of materials without altering their bulk properties. In particular, with the Plasma Enhanced Chemical Vapour Deposition (PECVD) is feasible sustaining the polymerization of a specific monomer depositing thin films containing interesting chemical groups. For these reasons, this ...

  12. H-mode inductive coupling plasma for PVC surface treatment

    Science.gov (United States)

    Croccolo, F.; Quintini, A.; Barni, R.; Ripamonti, M.; Malgaroli, A.; Riccardi, C.

    2009-08-01

    An inductively coupled plasma machine has been modified to be able to apply working powers in the order of 1 kW, thus switching to the real inductive H-mode. The plasma is generated by applying a 13.56 MHz radio-frequency to a λ/4 antenna outside the plasma chamber in low pressure conditions. The working gas is argon at pressure in the range from 10 to 100 Pa. With this high power source we have been able to perform plasma etching on a poly(vinyl-chloride) (PVC) film. In particular the effect of the plasma is the selective removal of hydrogen and chlorine from the sample surface. The action of the high power plasma on the sample has been proved to be much more effective than that of the low power one. Results similar to those obtained with the low power machine at about 300 W for 120 min, have been obtained with the high power source at about 600 W for 30 min. The superficial generation of a conductive layer of double C=C bonds was obtained. The samples have been investigated by means of ATR spectroscopy, FIB/SEM microscopy and micro-electrical measurements, which revealed the change in charge conductivity.

  13. Treatment Characteristics of Polysaccharides and Endotoxin Using Oxygen Plasma Produced by RF Discharge

    Science.gov (United States)

    Kitazaki, Satoshi; Hayashi, Nobuya; Goto, Masaaki

    2010-10-01

    Treatment of polysaccharides and endotoxin were attempted using oxygen plasma produced by RF discharge. Oxygen radicals observed by optical light emission spectra are factors of decomposition of polysaccharides and endotoxin. Fourier transform infrared spectra indicate that most of chemical bonds in the polysaccharides are dissociated after irradiation of the oxygen plasma. Also, the decomposition rate of endotoxin was approximately 90% after irradiation of the oxygen plasma for 180 min.

  14. Does platelet-rich plasma deserve a role in the treatment of tendinopathy?

    Science.gov (United States)

    Nourissat, Geoffroy; Ornetti, Paul; Berenbaum, Francis; Sellam, Jérémie; Richette, Pascal; Chevalier, Xavier

    2015-07-01

    Although tendinopathies constitute a heterogeneous group of conditions, they are often treated by similar combinations of local and systemic symptomatic interventions. The vast number of causes, pathophysiological mechanisms, and histological changes that characterizes tendinopathies may explain that the standard treatment fails in some patients. Platelet-rich plasma (PRP), which contains a host of soluble mediators including growth factors, has been suggested as a second-line treatment for refractory tendinopathy, with the goal of expediting tendon healing or remodeling. Here, we report a systematic literature review of basic research data from humans and animals that support the clinical use of PRP in tendinopathies and of clinical studies in the most common tendinopathies (elbow, knee, shoulder, and Achilles tendon). Our objective is to clarify the role for this new injectable treatment, which is garnering increasing attention. The level of evidence remains low, as few well-designed randomized controlled trials have been published. The available scientific evidence does not warrant the use of PRP for the first-line treatment of tendinopathy. PRP therapy may deserve consideration in specific tendinopathy subtypes, after failure of ultrasound-guided corticosteroid injections. Nevertheless, further studies are needed to define these potential indications and the optimal treatment protocols. A key point is that the complexity of the tendon healing process cannot be replicated simply by injecting a subset of growth factors, whose effects may occur in opposite directions over time. Topics not discussed in this review are the regulatory framework for PRP therapy, PRP nomenclature, and precautions for use, which are described in a previous article (Does platelet-rich plasma have a role in the treatment of osteoarthritis, Ornetti P, et al. [1]). Copyright © 2015 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

  15. Treatment of Amanita phalloides intoxication by fractionated plasma separation and adsorption (Prometheus®).

    Science.gov (United States)

    Bergis, Dominik; Friedrich-Rust, Mireen; Zeuzem, Stefan; Betz, Cristoph; Sarrazin, Christoph; Bojunga, Joerg

    2012-06-01

    To investigate the effectiveness and safety of extracorporeal detoxification using the fractionated plasma separation and adsorption system (FPSA, Prometheus® 4008H, Fresenius Medical Care, Germany) in patients suffering from acute liver failure due to intoxication with Amanita phalloides (AP) toxin. The study population consisted of 20 patients with proven AP intoxication (FPSA treatment group n=9, control group n=11). Urinary amanitin toxin concentration was measured by the Amanitin ELISA Kit (Bühlmann Laboratories, Germany, cut off level 1.5 ng/ml). All patients received standard medical treatment with activated charcoal, i.v. crystalloid fluids, silibinine and N-acetylcysteine. Additionally 9 patients underwent treatment with FPSA until undetectable amanitin levels. Mean urinary amanitin levels were significantly reduced by FPSA with 42.5 +/- 21.9 ng/ml before and 1.2 +/- 0.31 ng/ml after treatment (p=0.04). No hemodynamic, respiratory or hematological complications were observed. None of the patients had to undergo liver transplantation. All patients in the treatment group survived and were discharged fully recovered. One patient in the control group died due to shock and lactic acidosis; one patient remained dialysis dependent. Mean duration of hospital stay was 7.1 days in the treatment group and 11.7 days in the control group (p=0.30). Use of liver support therapy by fractionated plasma separation and adsorption (Prometheus®) offers a safe way for elimination of Amanita toxin with the potential to avoid the need for liver transplantation.

  16. Onsite Waste Water Treatment System

    Directory of Open Access Journals (Sweden)

    T. Subramani

    2014-06-01

    Full Text Available Onsite wastewater treatment systems (OWTSs have evolved from the pit privies used widely throughout history to installations capable of producing a disinfected effluent that is fit for human consumption. Although achieving such a level of effluent quality is seldom necessary, the ability of onsite systems to remove settles able solids, floatable grease and scum, nutrients, and pathogens. From wastewater discharges defines their importance in protecting human health and environmental resources. In the modern era, the typical onsite system has consisted primarily of a septic tank and a soil absorption field, also known as a subsurface wastewater infiltration system, or SWIS. In this manual, such systems are referred to as conventional systems. Septic tanks remove most settle able and floatable material and function as an anaerobic bioreactor that promotes partial digestion of retained organic matter. Septic tank effluent, which contains significant concentrations of pathogens and nutrients, has traditionally been discharged to soil, sand, or other media absorption fields (SWISs for further treatment through biological processes, adsorption, filtration, and infiltration into underlying soils. Conventional systems work well if they are installed in areas with appropriate soils and hydraulic capacities; designed to treat the incoming waste load to meet public health, ground water, and surface water performance standards; installed properly; and maintained to ensure long-term performance. These criteria, however, are often not met. Only about one-third of the land area in the United States has soils suited for conventional subsurface soil absorption fields. System densities in some areas exceed the capacity of even suitable soils to assimilate wastewater flows and retain and transform their contaminants. In addition, many systems are located too close to ground water or surface waters and others, particularly in rural areas with newly installed public

  17. Plasma membranes modified by plasma treatment or deposition as solid electrolytes for potential application in solid alkaline fuel cells.

    Science.gov (United States)

    Reinholdt, Marc; Ilie, Alina; Roualdès, Stéphanie; Frugier, Jérémy; Schieda, Mauricio; Coutanceau, Christophe; Martemianov, Serguei; Flaud, Valérie; Beche, Eric; Durand, Jean

    2012-07-30

    In the highly competitive market of fuel cells, solid alkaline fuel cells using liquid fuel (such as cheap, non-toxic and non-valorized glycerol) and not requiring noble metal as catalyst seem quite promising. One of the main hurdles for emergence of such a technology is the development of a hydroxide-conducting membrane characterized by both high conductivity and low fuel permeability. Plasma treatments can enable to positively tune the main fuel cell membrane requirements. In this work, commercial ADP-Morgane® fluorinated polymer membranes and a new brand of cross-linked poly(aryl-ether) polymer membranes, named AMELI-32®, both containing quaternary ammonium functionalities, have been modified by argon plasma treatment or triallylamine-based plasma deposit. Under the concomitant etching/cross-linking/oxidation effects inherent to the plasma modification, transport properties (ionic exchange capacity, water uptake, ionic conductivity and fuel retention) of membranes have been improved. Consequently, using plasma modified ADP-Morgane® membrane as electrolyte in a solid alkaline fuel cell operating with glycerol as fuel has allowed increasing the maximum power density by a factor 3 when compared to the untreated membrane.

  18. Plasma Membranes Modified by Plasma Treatment or Deposition as Solid Electrolytes for Potential Application in Solid Alkaline Fuel Cells

    Directory of Open Access Journals (Sweden)

    Christophe Coutanceau

    2012-07-01

    Full Text Available In the highly competitive market of fuel cells, solid alkaline fuel cells using liquid fuel (such as cheap, non-toxic and non-valorized glycerol and not requiring noble metal as catalyst seem quite promising. One of the main hurdles for emergence of such a technology is the development of a hydroxide-conducting membrane characterized by both high conductivity and low fuel permeability. Plasma treatments can enable to positively tune the main fuel cell membrane requirements. In this work, commercial ADP-Morgane® fluorinated polymer membranes and a new brand of cross-linked poly(aryl-ether polymer membranes, named AMELI-32®, both containing quaternary ammonium functionalities, have been modified by argon plasma treatment or triallylamine-based plasma deposit. Under the concomitant etching/cross-linking/oxidation effects inherent to the plasma modification, transport properties (ionic exchange capacity, water uptake, ionic conductivity and fuel retention of membranes have been improved. Consequently, using plasma modified ADP-Morgane® membrane as electrolyte in a solid alkaline fuel cell operating with glycerol as fuel has allowed increasing the maximum power density by a factor 3 when compared to the untreated membrane.

  19. Treatment of PDMS surfaces using pulsed DBD plasmas: comparing the use of different gases and its influence on adhesion

    CERN Document Server

    Nascimento, Fellype do; Machida, Munemasa; Parada, Sergio

    2015-01-01

    In this work we present some results of the treatment of polydimethylsiloxane (PDMS) surfaces using pulsed dielectric barrier discharge plasmas. The results of plasma treatment using different gases to produce the plasmas (argon, argon plus water, helium, helium plus water, nitrogen and nitrogen plus water) were compared testing the adhesion between two PDMS samples for each kind of plasma. We also studied the water contact angle in function of plasma process time of PDMS surfaces with each kind of plasma. The plasmas were characterized by optical emission spectroscopy to identify the emitting species and determine plasma temperatures through comparison with emission spectra simulations. Measurements of power delivered to the plasmas were also performed. Plasmas of all gases are good enough for surface treatment with long exposure time. But when only a few discharges are applied the best choice is the helium plasma.

  20. Atmospheric pressure plasma jet treatment evokes transient oxidative stress in HaCaT keratinocytes and influences cell physiology.

    Science.gov (United States)

    Wende, Kristian; Straßenburg, Susanne; Haertel, Beate; Harms, Manuela; Holtz, Sarah; Barton, Annemarie; Masur, Kai; von Woedtke, Thomas; Lindequist, Ulrike

    2014-04-01

    Modern non-thermal atmospheric pressure plasma sources enable controllable interaction with biological systems. Their future applications - e.g. wound management - are based on their unique mixture of reactive components sparking both stimulatory as well as inhibitory processes. To gain detailed understanding of plasma-cell interaction and with respect to risk awareness, key mechanisms need to be identified. This study focuses on the impact of an argon non-thermal atmospheric pressure plasma jet (kINPen 09) on human HaCaT keratinocytes. With increasing duration, cell viability decreased. In accordance, cells accumulated in G2/M phase within the following 24 h. DNA single-strand breaks were detected immediately after treatment and receded in the aftermath, returning to control levels after 24 h. No directly plasma-related DNA double-strand breaks were detected over the same time. Concurrently, DNA synthesis decreased. Coincident with treatment time, an increase in intracellular 2',7'-dichlorodihydrofluorescein diacetate (H(2)DCFDA) conversion increased reactive oxygen species (ROS) levels. The radical scavenging activity of culture medium crucially influenced these effects. Thus, ROS changed DNA integrity, and the effectiveness of cellular defence mechanisms characterises the interaction of non-thermal plasma and eukaryotic cells. Effects were time-dependent, indicating an active response of the eukaryotic cells. Hence, a stimulation of eukaryotic cells using short-term non-thermal plasma treatment seems possible, eg in the context of chronic wound care. Long-term plasma treatments stopped in cell proliferation and apoptosis, which might be relevant in controlling neoplastic conditions.

  1. Atmospheric Pressure Low Temperature Plasma System for Additive Manufacturing

    Science.gov (United States)

    Burnette, Matthew; Staack, David

    2016-09-01

    There is growing interest in using plasmas for additive manufacturing, however these methods use high temperature plasmas to melt the material. We have developed a novel technique of additive manufacturing using a low temperature dielectric barrier discharge (DBD) jet. The jet is attached to the head of a 3D printer to allow for precise control of the plasma's location. Various methods are employed to deposit the material, including using a vaporized precursor or depositing a liquid precursor directly onto the substrate or into the plasma via a nebulizer. Various materials can be deposited including metals (copper using copper (II) acetylacetonate), polymers (PMMA using the liquid monomer), and various hydrocarbon compounds (using alcohols or a 100% methane DBD jet). The rastering pattern for the 3D printer was modified for plasma deposition, since it was originally designed for thermoplastic extrusion. The design constraints for fill pattern selection for the plasma printer are influenced by substrate heating, deposition area, and precursor consumption. Depositions onto pressure and/or temperature sensitive substrates can be easily achieved. Deposition rates range up to 0.08 cm3/hr using tris(2-methoxyethoxy)(vinyl)silane, however optimization can still be done on the system to improve the deposition rate. For example higher concentration of precursor can be combined with faster motion and higher discharge powers to increase the deposition rate without overheating the substrate.

  2. Skeletal cell differentiation is enhanced by atmospheric dielectric barrier discharge plasma treatment.

    Directory of Open Access Journals (Sweden)

    Marla J Steinbeck

    Full Text Available Enhancing chondrogenic and osteogenic differentiation is of paramount importance in providing effective regenerative therapies and improving the rate of fracture healing. This study investigated the potential of non-thermal atmospheric dielectric barrier discharge plasma (NT-plasma to enhance chondrocyte and osteoblast proliferation and differentiation. Although the exact mechanism by which NT-plasma interacts with cells is undefined, it is known that during treatment the atmosphere is ionized generating extracellular reactive oxygen and nitrogen species (ROS and RNS and an electric field. Appropriate NT-plasma conditions were determined using lactate-dehydrogenase release, flow cytometric live/dead assay, flow cytometric cell cycle analysis, and Western blots to evaluate DNA damage and mitochondrial integrity. We observed that specific NT-plasma conditions were required to prevent cell death, and that loss of pre-osteoblastic cell viability was dependent on intracellular ROS and RNS production. To further investigate the involvement of intracellular ROS, fluorescent intracellular dyes Mitosox (superoxide and dihydrorhodamine (peroxide were used to assess onset and duration after NT-plasma treatment. Both intracellular superoxide and peroxide were found to increase immediately post NT-plasma treatment. These increases were sustained for one hour but returned to control levels by 24 hr. Using the same treatment conditions, osteogenic differentiation by NT-plasma was assessed and compared to peroxide or osteogenic media containing β-glycerolphosphate. Although both NT-plasma and peroxide induced differentiation-specific gene expression, neither was as effective as the osteogenic media. However, treatment of cells with NT-plasma after 24 hr in osteogenic or chondrogenic media significantly enhanced differentiation as compared to differentiation media alone. The results of this study show that NT-plasma can selectively initiate and amplify ROS

  3. Skeletal cell differentiation is enhanced by atmospheric dielectric barrier discharge plasma treatment.

    Science.gov (United States)

    Steinbeck, Marla J; Chernets, Natalie; Zhang, Jun; Kurpad, Deepa S; Fridman, Gregory; Fridman, Alexander; Freeman, Theresa A

    2013-01-01

    Enhancing chondrogenic and osteogenic differentiation is of paramount importance in providing effective regenerative therapies and improving the rate of fracture healing. This study investigated the potential of non-thermal atmospheric dielectric barrier discharge plasma (NT-plasma) to enhance chondrocyte and osteoblast proliferation and differentiation. Although the exact mechanism by which NT-plasma interacts with cells is undefined, it is known that during treatment the atmosphere is ionized generating extracellular reactive oxygen and nitrogen species (ROS and RNS) and an electric field. Appropriate NT-plasma conditions were determined using lactate-dehydrogenase release, flow cytometric live/dead assay, flow cytometric cell cycle analysis, and Western blots to evaluate DNA damage and mitochondrial integrity. We observed that specific NT-plasma conditions were required to prevent cell death, and that loss of pre-osteoblastic cell viability was dependent on intracellular ROS and RNS production. To further investigate the involvement of intracellular ROS, fluorescent intracellular dyes Mitosox (superoxide) and dihydrorhodamine (peroxide) were used to assess onset and duration after NT-plasma treatment. Both intracellular superoxide and peroxide were found to increase immediately post NT-plasma treatment. These increases were sustained for one hour but returned to control levels by 24 hr. Using the same treatment conditions, osteogenic differentiation by NT-plasma was assessed and compared to peroxide or osteogenic media containing β-glycerolphosphate. Although both NT-plasma and peroxide induced differentiation-specific gene expression, neither was as effective as the osteogenic media. However, treatment of cells with NT-plasma after 24 hr in osteogenic or chondrogenic media significantly enhanced differentiation as compared to differentiation media alone. The results of this study show that NT-plasma can selectively initiate and amplify ROS signaling to enhance

  4. Improving electrical properties of sol-gel derived zinc oxide thin films by plasma treatment

    Science.gov (United States)

    Talukder, Al-Ahsan; Pokharel, Jyotshna; Shrestha, Maheshwar; Fan, Qi H.

    2016-10-01

    Being a direct and wide bandgap semiconductor, zinc oxide is a suitable material for various optoelectronic applications. These applications require tuning and controlling over the electrical and optical properties of zinc oxide films. In this work, zinc oxide thin films were prepared by a solution method that led to oriented crystal growth along (002) plane. The zinc oxide thin films were treated with oxygen, hydrogen, and nitrogen plasmas. The films were characterized to reveal the effects of plasma treatments on transmittance, crystallinity, carrier density, carrier mobility, and electrical resistivity. Oxygen plasma treatment improved the crystallinity of the zinc oxide thin film without affecting the film's transmittance. Hydrogen plasma treatments were found very effective in improving the electrical conductivity sacrificing the film's transmittance. Nitrogen plasma treatment led to improved electrical conductivity without compromising the crystallinity and optical transmittance. Sequential oxygen, hydrogen, and nitrogen plasma treatments significantly reduced the resistivity of zinc oxide thin films by over two orders and maintained the transmittance close to the as-deposited films of ˜80% in visible wavelength range. This is the first work on the improvement of conductivity of solution-based zinc oxide films using the plasma treatment.

  5. Modification of ink-jet paper by oxygen-plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Vesel, A [Jozef Stefan Institute, Jamova 39, Ljubljana 1000 (Slovenia); Mozetic, M [Jozef Stefan Institute, Jamova 39, Ljubljana 1000 (Slovenia); Hladnik, A [Pulp and Paper Institute, Bogisiceva 8, Ljubljana 1001 (Slovenia); Dolenc, J [Pulp and Paper Institute, Bogisiceva 8, Ljubljana 1001 (Slovenia); Zule, J [Pulp and Paper Institute, Bogisiceva 8, Ljubljana 1001 (Slovenia); Milosevic, S [Institute of Physics, Bijenicka 46, Zagreb 10000 (Croatia); Krstulovic, N [Institute of Physics, Bijenicka 46, Zagreb 10000 (Croatia); Klanjsek-Gunde, M [National Institute of Chemistry, Hajdrihova 19, Ljubljana 1000 (Slovenia); Hauptmann, N [National Institute of Chemistry, Hajdrihova 19, Ljubljana 1000 (Slovenia)

    2007-06-21

    A study on oxygen-plasma treatment of ink-jet paper is presented. Paper was exposed to a weakly ionized, highly dissociated oxygen plasma with an electron temperature of 5 eV, a positive-ion density of 8 x 10{sup 15} m{sup -3} and a density of neutral oxygen atoms of 5 x 10{sup 21} m{sup -3}. Optical emission spectroscopy (OES) was applied as a method for detection of the reaction products during the plasma treatment of the paper. OES spectra between 250 and 1000 nm were measured continuously during the plasma treatment. The wettability of the samples before and after the plasma treatment was determined by measuring the contact angle of a water drop. The appearance of the surface-functional groups was determined by using high-resolution x-ray photoelectron spectroscopy (XPS), while changes in the surface morphology were monitored with scanning electron microscopy (SEM). Already after 1 s of the plasma treatment the surface, which was originally hydrophobic, changed to hydrophilic, as indicated by a high absorption rate of a water drop into the paper. The OES showed a rapid increase of the CO and OH bands for the first few seconds of the plasma treatment, followed by a slow decrease during the next 40 s. The intensity of the O atom line showed reversed behaviour. The XPS analyses showed a gradual increase of oxygen-rich functional groups on the surface, while SEM analyses did not show significant modification of the morphology during the first 10 s of the plasma treatment. The results were explained by degradation of the alkyl ketene dimer sizing agent during the first few seconds of the oxygen-plasma treatment.

  6. Treatment of Wastewater with High Conductivity by Pulsed Discharge Plasma

    Science.gov (United States)

    Wang, Zhaojun; Jiang, Song; Liu, Kefu

    2014-07-01

    A wastewater treatment system was established by means of pulsed dielectric barrier discharge (DBD). The main advantage of this system is that the wastewater is employed as one of the electrodes for the degradation of rhodamine B, which makes use of the high conductivity and lessenes its negative influence on the discharge process. At the same time, the reactive species like ozone and ultraviolet (UV) light generated by the DBD can be utilized for the treatment of wastewater. The effects of some factors like conductivity, peak pulse voltage, discharge frequency and pH values were investigated. The results show that the combination of these reactive species could enhance the degradation of the dye while the ozone played the most important role in the process. The degradation efficiency was enhanced with the increase of energy supplied. The reduction in the concentration of rhodamine B was much more effective with high solution conductivity; under the highest conductivity condition, the degradation rate could rise to 99%.

  7. Microsecond-pulsed dielectric barrier discharge plasma stimulation of tissue macrophages for treatment of peripheral vascular disease

    Science.gov (United States)

    Miller, V.; Lin, A.; Kako, F.; Gabunia, K.; Kelemen, S.; Brettschneider, J.; Fridman, G.; Fridman, A.; Autieri, M.

    2015-12-01

    Angiogenesis is the formation of new blood vessels from pre-existing vessels and normally occurs during the process of inflammatory reactions, wound healing, tissue repair, and restoration of blood flow after injury or insult. Stimulation of angiogenesis is a promising and an important step in the treatment of peripheral artery disease. Reactive oxygen species have been shown to be involved in stimulation of this process. For this reason, we have developed and validated a non-equilibrium atmospheric temperature and pressure short-pulsed dielectric barrier discharge plasma system, which can non-destructively generate reactive oxygen species and other active species at the surface of the tissue being treated. We show that this plasma treatment stimulates the production of vascular endothelial growth factor, matrix metalloproteinase-9, and CXCL 1 that in turn induces angiogenesis in mouse aortic rings in vitro. This effect may be mediated by the direct effect of plasma generated reactive oxygen species on tissue.

  8. Microsecond-pulsed dielectric barrier discharge plasma stimulation of tissue macrophages for treatment of peripheral vascular disease

    Energy Technology Data Exchange (ETDEWEB)

    Miller, V., E-mail: vmiller@coe.drexel.edu; Lin, A.; Brettschneider, J.; Fridman, G.; Fridman, A. [AJ Drexel Plasma Institute, Drexel University, Camden, New Jersey 08103 (United States); Kako, F.; Gabunia, K.; Kelemen, S.; Autieri, M. [Department of Physiology, Independence Blue Cross Cardiovascular Research Center, Temple University School of Medicine, Philadelphia, Pennsylvania 19140 (United States)

    2015-12-15

    Angiogenesis is the formation of new blood vessels from pre-existing vessels and normally occurs during the process of inflammatory reactions, wound healing, tissue repair, and restoration of blood flow after injury or insult. Stimulation of angiogenesis is a promising and an important step in the treatment of peripheral artery disease. Reactive oxygen species have been shown to be involved in stimulation of this process. For this reason, we have developed and validated a non-equilibrium atmospheric temperature and pressure short-pulsed dielectric barrier discharge plasma system, which can non-destructively generate reactive oxygen species and other active species at the surface of the tissue being treated. We show that this plasma treatment stimulates the production of vascular endothelial growth factor, matrix metalloproteinase-9, and CXCL 1 that in turn induces angiogenesis in mouse aortic rings in vitro. This effect may be mediated by the direct effect of plasma generated reactive oxygen species on tissue.

  9. The plasma carboxypeptidases and the regulation of the plasminogen system.

    Science.gov (United States)

    Plow, E F; Allampallam, K; Redlitz, A

    1997-04-01

    Central to the regulation of the plasminogen system, a proteolytic network that mediates degradation of fibrin and facilitates cell migration, is the binding of plasminogen to carboxy-terminal lysines. These residues occur either naturally on plasmin substrates or cell surfaces or are generated as a consequence of partial plasmin degradation. The basic carboxypeptidases of plasma are capable of removing such carboxy-terminal lysines. Carboxypeptidase N, which is constitutively active, suppresses plasminogen binding to cell surfaces; plasma carboxypeptidase B, which must be proteolytically activated, not only suppresses cellular binding of plasminogen but also dampens fibrinolysis. Thus, the plasma carboxypeptidases may constitute an important regulatory pathway for controlling the activity of the plasminogen system in physiologic, pathophysiologic, and pharmacologic circumstances. (Trends Cardiovasc Med 1997;7:71-75). © 1997, Elsevier Science Inc.

  10. Assessing the temporal stability of surface functional groups introduced by plasma treatments on the outer shells of carbon nanotubes

    Science.gov (United States)

    Merenda, Andrea; Ligneris, Elise Des; Sears, Kallista; Chaffraix, Thomas; Magniez, Kevin; Cornu, David; Schütz, Jürg A.; Dumée, Ludovic F.

    2016-08-01

    Plasma treatments are emerging as superior efficiency treatment for high surface to volume ratio materials to tune functional group densities and alter crystallinity due to their ability to interact with matter at the nanoscale. The purpose of this study is to assess for the first time the long term stability of surface functional groups introduced across the surface of carbon nanotube materials for a series of oxidative, reductive and neutral plasma treatment conditions. Both plasma duration dose matrix based exposures and time decay experiments, whereby the surface energy of the materials was evaluated periodically over a one-month period, were carried out. Although only few morphological changes across the graphitic planes of the carbon nanotubes were found under the uniform plasma treatment conditions, the time dependence of pertinent work functions, supported by Raman analysis, suggested that the density of polar groups decreased non-linearly over time prior to reaching saturation from 7 days post treatment. This work provides critical considerations on the understanding of the stability of functional groups introduced across high specific surface area nano-materials used for the design of nano-composites, adsorptive or separation systems, or sensing materials and where interfacial interactions are key to the final materials performance.

  11. Modulation of Erythrocyte Plasma Membrane Redox System Activity by Curcumin

    Directory of Open Access Journals (Sweden)

    Prabhakar Singh

    2016-01-01

    Full Text Available Plasma membrane redox system (PMRS is an electron transport chain system ubiquitously present throughout all cell types. It transfers electron from intracellular substrates to extracellular acceptors for regulation of redox status. Curcumin, isolated from Curcuma longa, has modulatory effects on cellular physiology due to its membrane interaction ability and antioxidant potential. The present study investigates the effect of curcumin on PMRS activity of erythrocytes isolated from Wistar rats in vitro and in vivo and validated through an in silico docking simulation study using Molegro Virtual Docker (MVD. Effects of curcumin were also evaluated on level of glutathione (GSH and the oxidant potential of plasma measured in terms of plasma ferric equivalent oxidative potentials (PFEOP. Results show that curcumin significantly (p<0.01 downregulated the PMRS activity in a dose-dependent manner. Molecular docking results suggest that curcumin interacts with amino acids at the active site cavity of cytochrome b5 reductase, a key constituent of PMRS. Curcumin also increased the GSH level in erythrocytes and plasma while simultaneously decreasing the oxidant potential (PFEOP of plasma. Altered PMRS activity and redox status are associated with the pathophysiology of several health complications including aging and diabetes; hence, the above finding may explain part of the role of curcumin in health beneficial effects.

  12. The surface chemistry resulting from low-pressure plasma treatment of polystyrene: The effect of residual vessel bound oxygen

    Science.gov (United States)

    Dhayal, Marshal; Alexander, Morgan R.; Bradley, James W.

    2006-09-01

    The surface chemistry of plasma treated polystyrene samples has been studied in a specially designed low-pressure argon discharge system incorporating in situ XPS analysis. By using an electrostatic grid biasing technique, the plasma source can also be used in a mode preventing ion interactions with the sample. The system, which utilizes a vacuum transfer chamber between plasma and XPS analysis has allowed us to differentiate between the level of oxygen incorporated at the polystyrene surface from residual gas during treatment and that from the exposure of the treated sample to the laboratory atmosphere. Using typical base pressures of about 5 × 10 -3 Pa (4 × 10 -5 Torr) the XPS results show that significant oxygen surface incorporation resulted from oxygen containing species in the plasma itself (i.e. water vapour with 2 × 10 -3 Pa partial pressure). The surface concentration of O was measured at 7.6 at.%. Subsequent atmospheric exposure of the treated samples resulted in only a small increase (of 0.6 at.%) in oxygen incorporation in the form of acid anhydride functionalities. XPS measurements of PS samples exposed to plasmas with no ion-surface component (i.e. exposure from VUV, UV and excited neutral species only) showed no appreciable change in oxygen incorporation compared to those with low-energy ion bombardment from the plasma (free radical sites in this discharge regime.

  13. Effects of cold plasma treatment on seed germination and seedling growth of soybean

    Science.gov (United States)

    Ling, Li; Jiafeng, Jiang; Jiangang, Li; Minchong, Shen; Xin, He; Hanliang, Shao; Yuanhua, Dong

    2014-07-01

    Effects of cold plasma treatment on soybean (Glycine max L. Merr cv. Zhongdou 40) seed germination and seedling growth were studied. Seeds were pre-treated with 0, 60, 80, 100 and 120 W of cold plasma for 15 s. Results showed that plasma treatments had positive effects on seed germination and seedling growth, and treatment of 80 W had the highest stimulatory effect. Germination and vigor indices significantly increased by 14.66% and 63.33%, respectively. Seed's water uptake improved by 14.03%, and apparent contact angle decreased by 26.19%. Characteristics of seedling growth, including shoot length, shoot dry weight, root length and root dry weight, significantly increased by 13.77%, 21.95%, 21.42% and 27.51%, respectively, compared with control. The seed reserve utilization, including weight of the mobilized seed reserve, seed reserve depletion percentage and seed reserve utilization efficiency significantly improved by cold plasma treatment. In addition, soluble sugar and protein contents were 16.51% and 25.08% higher than those of the control. Compared to a 21.95% increase in shoot weight, the root weight increased by 27.51% after treatment, indicating that plasma treatment had a greater stimulatory effect on plant roots. These results indicated that cold plasma treatment might promote the growth even yield of soybean.

  14. Effects of cold plasma treatment on seed germination and seedling growth of soybean.

    Science.gov (United States)

    Ling, Li; Jiafeng, Jiang; Jiangang, Li; Minchong, Shen; Xin, He; Hanliang, Shao; Yuanhua, Dong

    2014-07-31

    Effects of cold plasma treatment on soybean (Glycine max L. Merr cv. Zhongdou 40) seed germination and seedling growth were studied. Seeds were pre-treated with 0, 60, 80, 100 and 120 W of cold plasma for 15 s. Results showed that plasma treatments had positive effects on seed germination and seedling growth, and treatment of 80 W had the highest stimulatory effect. Germination and vigor indices significantly increased by 14.66% and 63.33%, respectively. Seed's water uptake improved by 14.03%, and apparent contact angle decreased by 26.19%. Characteristics of seedling growth, including shoot length, shoot dry weight, root length and root dry weight, significantly increased by 13.77%, 21.95%, 21.42% and 27.51%, respectively, compared with control. The seed reserve utilization, including weight of the mobilized seed reserve, seed reserve depletion percentage and seed reserve utilization efficiency significantly improved by cold plasma treatment. In addition, soluble sugar and protein contents were 16.51% and 25.08% higher than those of the control. Compared to a 21.95% increase in shoot weight, the root weight increased by 27.51% after treatment, indicating that plasma treatment had a greater stimulatory effect on plant roots. These results indicated that cold plasma treatment might promote the growth even yield of soybean.

  15. Quantum dynamics of biological systems and dust plasma nanoparticles

    Science.gov (United States)

    Lasukov, V. V.; Lasukova, T. V.; Lasukova, O. V.

    2012-12-01

    A quantum solution of the Fisher-Kolmogorov-Petrovskii-Piskunov equation with convection and linear diffusion is obtained which can provide the basis for the quantum biology and quantum microphysics equation. On this basis, quantum emission of biological systems, separate microorganisms (cells or bacteria), and dust plasma particles is investigated.

  16. Wave Propagation in an Ion Beam-Plasma System

    DEFF Research Database (Denmark)

    Jensen, T. D.; Michelsen, Poul; Juul Rasmussen, Jens

    1979-01-01

    The spatial evolution of a velocity- or density-modulated ion beam is calculated for stable and unstable ion beam plasma systems, using the linearized Vlasov-Poisson equations. The propagation properties are found to be strongly dependent on the form of modulation. In the case of velocity...

  17. Spacecraft charging and plasma interaction implications for large space systems

    Science.gov (United States)

    Miller, E.; Stauber, M.; Rossi, M.; Fischbein, W.

    1978-01-01

    Specific discharge mechanisms, plasma interactions, and scale effects associated with very large spacecraft are studied. The large area, low density character, and extensive use of non-conducting materials is thought to have a major impact on the performance and survivability of many large space systems.

  18. Control of ROS and RNS productions in liquid in atmospheric pressure plasma-jet system

    Science.gov (United States)

    Uchida, Giichiro; Ito, Taiki; Takenaka, Kosuke; Ikeda, Junichiro; Setsuhara, Yuichi

    2016-09-01

    Non-thermal plasma jets are of current interest in biomedical applications such as wound disinfection and even treatment of cancer tumors. Beneficial therapeutic effects in medical applications are attributed to excited species of oxygen and nitrogen from air. However, to control the production of these species in the plasma jet is difficult because their production is strongly dependent on concentration of nitrogen and oxygen from ambient air into the plasma jet. In this study, we analyze the discharge characteristics and the ROS and RNS productions in liquid in low- and high-frequency plasma-jet systems. Our experiments demonstrated the marked effects of surrounding gas near the plasma jet on ROS and RNS productions in liquid. By controlling the surround gas, the O2 and N2 main plasma jets are selectively produced even in open air. We also show that the concentration ratio of NO2- to H2O2 in liquid is precisely tuned from 0 to 0.18 in deionized water by changing N2 gas ratio (N2 / (N2 +O2)) in the main discharge gas, where high NO2- ratio is obtained at N2 gas ratio at N2 / (N2 +O2) = 0 . 8 . The low-frequency plasma jet with controlled surrounding gas is an effective plasma source for ROS and RNS productions in liquid, and can be a useful tool for biomedical applications. This study was partly supported by a Grant-in-Aid for Scientific Research on Innovative Areas ``Plasma Medical Innovation'' (24108003) from the Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT).

  19. Germination of Chenopodium Album in Response to Microwave Plasma Treatment

    Institute of Scientific and Technical Information of China (English)

    Bo(z)ena (S)ER(A); Vitězslav STRA(NA)K; Michal (S)ER(Y); Milan TICH(Y); Petr (S)PATENKA

    2008-01-01

    The seeds of Lamb's Quarters (Chenopodium album agg.) were stimulated by low-pressure discharge. The tested seeds were exposed to plasma discharge for different time durations (from 6 minutes to 48 minutes). Germination tests were performed under specified laboratory conditions during seven days in five identical and completely independent experiments. Significant differences between the control and plasma-treated seeds were observed. The treated seeds showed structural changes on the surface of the seat coat. They germinated faster and their sprout accretion on the first day of seed germination was longer. Germination rate for the untreated seeds was 15% while it increased approximately three times (max 55%) for seeds treated by plasma from 12 minutes to 48 minutes.

  20. Germination of Chenopodium Album in Response to Microwave Plasma Treatment

    Science.gov (United States)

    Será, Bozena; Stranák, Vitezslav; Serý, Michal; Tichý, Milan; Spatenka, Petr

    2008-08-01

    The seeds of Lamb's Quarters (Chenopodium album agg.) were stimulated by low-pressure discharge. The tested seeds were exposed to plasma discharge for different time durations (from 6 minutes to 48 minutes). Germination tests were performed under specified laboratory conditions during seven days in five identical and completely independent experiments. Significant differences between the control and plasma-treated seeds were observed. The treated seeds showed structural changes on the surface of the seat coat. They germinated faster and their sprout accretion on the first day of seed germination was longer. Germination rate for the untreated seeds was 15% while it increased approximately three times (max 55%) for seeds treated by plasma from 12 minutes to 48 minutes.

  1. Plasma exchange in the treatment of immune disease.

    Science.gov (United States)

    Branda, R F; Moldow, C F; McCullough, J J; Jacob, H S

    1975-01-01

    Plasma exchange was investigated as an alternative to the use of toxic drugs to remove unwanted antibody. Studies in rabbits immunized with bovine serum albumin demonstrate that exchange transfusion after a primary immunization results in a rebound of antibody to above preexchange levels. However, exchange transfusion seven, 11, or 18 days after secondary immunization results in permanent lowering of antibody levels. Plasma exchange with the continuous flow centrifuge was used in four patients with hematologic diseases. White cell isoantibodies were removed in a septic leukopenic patient, permitting white cell transfusions. Two patients with immune thrombocytopenia were exchanges; one showed prompt and permanent elevation of platelet count, while the other did not improve. A patient with immune hemolytic anemia had stabilization of hemoglobin levels and decreased Coombs reactivity following plasma exchange.

  2. Plasma treatment of polystyrene thin films affects more than the surface.

    Science.gov (United States)

    Calchera, Angela R; Curtis, Alexander D; Patterson, James E

    2012-07-25

    Plasma treatment of polymer materials introduces chemical functionalities and modifies the material to make the native hydrophobic surface more hydrophilic. It is generally assumed that this process only affects the surface of the material. We used vibrationally resonant sum-frequency generation spectroscopy to observe changes in the orientation of phenyl groups in polystyrene (PS) thin films on various substrates before and after plasma treatment. VR-SFG selectively probes regions of broken symmetry, such as surfaces, but can also detect the emergence of anisotropy. On dielectric substrates, such as fused silica, the spectroscopic peak corresponding to the symmetric stretching (ν2) mode of the phenyl rings was undetectable after plasma treatment, showing that surface phenyl rings were altered. This peak also diminished on conducting substrates, but the intensity of another peak corresponding to the same mode in a bulklike environment increased significantly, suggesting that plasma treatment induces partial ordering of the bulk polymer. This ordering is seen on conducting substrates even when the polymer is not directly exposed to the plasma. Annealing reverses these effects on the polystyrene bulk; however, the surface phenyl rings do not return to the orientation observed for untreated films. These results call into question the assumption that the effects of plasma treatment are limited to the free surface and opens up other possibilities for material modification with low-temperature plasmas.

  3. Integrated gasification and plasma cleaning for waste treatment: A life cycle perspective

    Energy Technology Data Exchange (ETDEWEB)

    Evangelisti, Sara [Chemical Engineering Department, University College London, Torrington Place, London WC1E 7JE (United Kingdom); Tagliaferri, Carla [Chemical Engineering Department, University College London, Torrington Place, London WC1E 7JE (United Kingdom); Advanced Plasma Power (APP), Unit B2, Marston Gate, South Marston Business Park, Swindon SN3 4DE (United Kingdom); Clift, Roland [Centre for Environmental Strategy, The University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom); Lettieri, Paola, E-mail: p.lettieri@ucl.ac.uk [Chemical Engineering Department, University College London, Torrington Place, London WC1E 7JE (United Kingdom); Taylor, Richard; Chapman, Chris [Advanced Plasma Power (APP), Unit B2, Marston Gate, South Marston Business Park, Swindon SN3 4DE (United Kingdom)

    2015-09-15

    Highlights: • A life cycle assessment of an advanced two-stage process is undertaken. • A comparison of the impacts of the process when fed with 7 feedstock is presented. • Sensitivity analysis on the system is performed. • The treatment of RDF shows the lowest impact in terms of both GWP and AP. • The plasma shows a small contribution to the overall impact of the plant. - Abstract: In the past, almost all residual municipal waste in the UK was landfilled without treatment. Recent European waste management directives have promoted the uptake of more sustainable treatment technologies, especially for biodegradable waste. Local authorities have started considering other options for dealing with residual waste. In this study, a life cycle assessment of a future 20 MWe plant using an advanced two-stage gasification and plasma technology is undertaken. This plant can thermally treat waste feedstocks with different composition and heating value to produce electricity, steam and a vitrified product. The objective of the study is to analyse the environmental impacts of the process when fed with seven different feedstocks (including municipal solid waste, solid refuse fuel, reuse-derived fuel, wood biomass and commercial & industrial waste) and identify the process steps which contribute more to the environmental burden. A scenario analysis on key processes, such as oxygen production technology, metal recovery and the appropriate choice for the secondary market aggregate material, is performed. The influence of accounting for the biogenic carbon content in the waste from the calculations of the global warming potential is also shown. Results show that the treatment of the refuse-derived fuel has the lowest impact in terms of both global warming potential and acidification potential because of its high heating value. For all the other impact categories analysed, the two-stage gasification and plasma process shows a negative impact for all the waste streams

  4. Effect of low-temperature plasma treatment on tailorability and thermal properties of wool fabrics

    Indian Academy of Sciences (India)

    V S Goud; J S Udakhe

    2011-10-01

    Dielectric barrier discharge type of plasma reactor was used for the low-temperature plasma (LTP) treatment of the wool fabrics. Air was used as the non-polymerizing gas for the plasma treatment at different time intervals. Low-stress mechanical properties of the treated and untreated wool fabrics were evaluated using Siro-fast technique which revealed that the tensile, bending, compression, shear, dimensional stability and surface properties were altered after the LTP treatment. Other properties such as thermal conductivity, thermal resistance and pilling propensity were also evaluated. The surface topographical changes of the wool fibres after LTP treatment were analysed by scanning electron microscopy. The changes in these properties are supposed to be related closely to the interfibre and interyarn frictional force and increased surface area of the fibres induced by the etching effect of plasma.

  5. Role of Ultrasound Guided Platelet-Rich Plasma (PRP Injection in Treatment of Lateral Epicondylitis

    Directory of Open Access Journals (Sweden)

    Enass M. Khattab

    2017-06-01

    Conclusion: We concluded that US-guided platelet-rich plasma (PRP injection for treatment of lateral epicondylitis was a safe, minimally invasive and effective procedure in improving the sonographic and pathological changes of common extensor tendon (CET.

  6. Modification of SrTiO3 single-crystalline surface after plasma flow treatment

    Energy Technology Data Exchange (ETDEWEB)

    Levin, Alexandr A.; Weissbach, Torsten; Leisegang, Tilmann; Meyer, Dirk C. [Institut fuer Strukturphysik, Technische Universitaet Dresden, 01062 Dresden (Germany); Kulagin, Nikolay A. [Kharkiv National University for Radioelectronics, av. Shakespeare 6-48, 61045 Kharkiv (Ukraine); Langer, Enrico [Institut fuer Festkoerperphysik, Technische Universitaet Dresden, 01062 Dresden (Germany)

    2009-07-01

    Surface of pure and transition metal-doped SrTiO3(STO) single crystals before and after hydrogen plasma-flow treatment (energy of 5..20 J/cm2) is investigated by wide-angle X-ray diffraction (WAXRD), fluorescence X-ray absorption near edge structure (XANES) and scanning electron microscopy (SEM) techniques. Plasma treatment results in the formation of a textured polycrystalline layer at the surface of the single-crystalline samples with different orientation. The formation of the quasi-ordered structures consisting of nanoscale-sized pyramids is observed by SEM. XANES evidences the change of the valency of the part of Ti4+ to Ti3+ due to the plasma treatment. The data obtained together with results of X-ray spectroscopy measurements gives evidences of the change of stoichiometry of the STO samples resulting in a change of their physical properties after plasma treatment.

  7. Silent Discharge Plasma Technology for the Treatment of Air Toxics and Other Applications

    Energy Technology Data Exchange (ETDEWEB)

    Rosocha, Louis A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Chase, Peter J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Gross, Michael P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    1998-09-21

    Under this CRADA, the Los Alamos National Laboratory (LANL) and High Mesa Technologies, Inc. (HMT) carried out a joint project on the development of the silent discharge plasma (SDP) technology for the treatment of hazardous air pollutants and other hazardous or toxic chemicals. The project had two major components: a technology-demonstration part and a scale-up and commercialization part. In the first part, a small-scale, mobile SDP plasma processor, which was being developed under a CRADA with the Electric Power Research Institute (EPRI) was the mobile equipment was modified for higher capacity service and employed for an innovative remediation technologies demonstration on soil-vapor extraction off-gases at the McClellan Air Force Base near Sacramento, CA. The performance of the SDP system for the variety of volatile organic compounds (VOCs) encountered at the McClellan site was sufficiently promising to the project HMT and LANL worked together to formulate a scale-up strategy and commercialization/manufacturing plan, and to design a prototype scaled-up SDP unit. HMT and LANL are now in the final stages of completing a licensing agreement for the technology and HMT is in the process of raising funds to engineer and manufacture commercial prototype SDP equipment focused on stack-gas emissions control and environmental remediation. HMT, in collaboration with another Northern New Mexico business, Coyote Aerospace, has also been successful in receiving a Phase I Small Business Innovative Research (SBIR) award from the Army Research Office to develop, design, and construct a small non-thermal plasma reactor for laboratory studies ("Non-Thermal Plasma Reactor for Control of Fugitive Emissions of Toxic Gases")

  8. Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel

    Directory of Open Access Journals (Sweden)

    Naiming Lin

    2016-10-01

    Full Text Available Surface texturing-plasma nitriding duplex treatment was conducted on AISI 316 stainless steel to improve its tribological performance. Tribological behaviors of ground 316 substrates, plasma-nitrided 316 (PN-316, surface-textured 316 (ST-316, and duplex-treated 316 (DT-316 in air and under grease lubrication were investigated using a pin-on-disc rotary tribometer against counterparts of high carbon chromium bearing steel GCr15 and silicon nitride Si3N4 balls. The variations in friction coefficient, mass loss, and worn trace morphology of the tested samples were systemically investigated and analyzed. The results showed that a textured surface was formed on 316 after electrochemical processing in a 15 wt % NaCl solution. Grooves and dimples were found on the textured surface. As plasma nitriding was conducted on a 316 substrate and ST-316, continuous and uniform nitriding layers were successfully fabricated on the surfaces of the 316 substrate and ST-316. Both of the obtained nitriding layers presented thickness values of more than 30 μm. The nitriding layers were composed of iron nitrides and chromium nitride. The 316 substrate and ST-316 received improved surface hardness after plasma nitriding. When the tribological tests were carried out under dry sliding and grease lubrication conditions, the tested samples showed different tribological behaviors. As expected, the DT-316 samples revealed the most promising tribological properties, reflected by the lowest mass loss and worn morphologies. The DT-316 received the slightest damage, and its excellent tribological performance was attributed to the following aspects: firstly, the nitriding layer had high surface hardness; secondly, the surface texture was able to capture wear debris, store up grease, and then provide continuous lubrication.

  9. Surface Texturing-Plasma Nitriding Duplex Treatment for Improving Tribological Performance of AISI 316 Stainless Steel.

    Science.gov (United States)

    Lin, Naiming; Liu, Qiang; Zou, Jiaojuan; Guo, Junwen; Li, Dali; Yuan, Shuo; Ma, Yong; Wang, Zhenxia; Wang, Zhihua; Tang, Bin

    2016-10-27

    Surface texturing-plasma nitriding duplex treatment was conducted on AISI 316 stainless steel to improve its tribological performance. Tribological behaviors of ground 316 substrates, plasma-nitrided 316 (PN-316), surface-textured 316 (ST-316), and duplex-treated 316 (DT-316) in air and under grease lubrication were investigated using a pin-on-disc rotary tribometer against counterparts of high carbon chromium bearing steel GCr15 and silicon nitride Si₃N₄ balls. The variations in friction coefficient, mass loss, and worn trace morphology of the tested samples were systemically investigated and analyzed. The results showed that a textured surface was formed on 316 after electrochemical processing in a 15 wt % NaCl solution. Grooves and dimples were found on the textured surface. As plasma nitriding was conducted on a 316 substrate and ST-316, continuous and uniform nitriding layers were successfully fabricated on the surfaces of the 316 substrate and ST-316. Both of the obtained nitriding layers presented thickness values of more than 30 μm. The nitriding layers were composed of iron nitrides and chromium nitride. The 316 substrate and ST-316 received improved surface hardness after plasma nitriding. When the tribological tests were carried out under dry sliding and grease lubrication conditions, the tested samples showed different tribological behaviors. As expected, the DT-316 samples revealed the most promising tribological properties, reflected by the lowest mass loss and worn morphologies. The DT-316 received the slightest damage, and its excellent tribological performance was attributed to the following aspects: firstly, the nitriding layer had high surface hardness; secondly, the surface texture was able to capture wear debris, store up grease, and then provide continuous lubrication.

  10. Soluble Proteins Form Film by the Treatment of Low Temperature Plasma

    Science.gov (United States)

    Ikehara, Sanae; Sakakita, Hajime; Ishikawa, Kenji; Akimoto, Yoshihiro; Nakanishi, Hayao; Shimizu, Nobuyuki; Hori, Masaru; Ikehara, Yuzuru

    2015-09-01

    It has been pointed out that low temperature plasma in atmosphere was feasible to use for hemostasis without heat injury. Indeed, earlier studies demonstrated that low temperature plasma played an important role to stimulate platelets to aggregate and turned on the proteolytic activities of coagulation factors, resulting in the acceleration of the natural blood coagulation process. On the other hands, our developed equips could immediately form clots upon the contact with plasma flair, while the histological appearance was different from natural coagulation. Based on these findings in formed clots, we sought to determine if plasma flair supplied by our devices was capable of forming film using a series of soluble proteins Following plasma treatment, films were formed from bovine serum albumin, and the other plasma proteins at physiological concentration. Analysis of trans-electron microscope demonstrated that plasma treatment generated small protein particles and made them fuse to be larger aggregations The combined results demonstrated that plasma are capable of aggregating soluble proteins and that platelets and coagulation factors are not necessary for plasma induced blood coagulation. Supported in part by Grants-in-Aid for Scientific Research on Priority Area (21590454, 24590498, and 24108006 to Y. I.).

  11. Counter-facing plasma focus system as a repetitive and/or long-pulse high energy density plasma source

    Science.gov (United States)

    Aoyama, Yutaka; Nakajima, Mitsuo; Horioka, Kazuhiko

    2009-11-01

    A plasma focus system composed of a pair of counter-facing coaxial plasma guns is proposed as a long-pulse and/or repetitive high energy density plasma source. A proof-of-concept experiment demonstrated that with an assist of breakdown and outer electrode connections, current sheets evolved into a configuration for stable plasma confinement at the center of the electrodes. The current sheets could successively compress and confine the high energy density plasma every half period of the discharge current, enabling highly repetitive light emissions in extreme ultraviolet region with time durations in at least ten microseconds.

  12. Diagnostic for Plasma Enhanced Chemical Vapor Deposition and Etch Systems

    Science.gov (United States)

    Cappelli, Mark A.

    1999-01-01

    In order to meet NASA's requirements for the rapid development and validation of future generation electronic devices as well as associated materials and processes, enabling technologies ion the processing of semiconductor materials arising from understanding etch chemistries are being developed through a research collaboration between Stanford University and NASA-Ames Research Center, Although a great deal of laboratory-scale research has been performed on many of materials processing plasmas, little is known about the gas-phase and surface chemical reactions that are critical in many etch and deposition processes, and how these reactions are influenced by the variation in operating conditions. In addition, many plasma-based processes suffer from stability and reliability problems leading to a compromise in performance and a potentially increased cost for the semiconductor manufacturing industry. Such a lack of understanding has hindered the development of process models that can aid in the scaling and improvement of plasma etch and deposition systems. The research described involves the study of plasmas used in semiconductor processes. An inductively coupled plasma (ICP) source in place of the standard upper electrode assembly of the Gaseous Electronics Conference (GEC) radio-frequency (RF) Reference Cell is used to investigate the discharge characteristics and chemistries. This ICP source generates plasmas with higher electron densities (approximately 10(exp 12)/cu cm) and lower operating pressures (approximately 7 mTorr) than obtainable with the original parallel-plate version of the GEC Cell. This expanded operating regime is more relevant to new generations of industrial plasma systems being used by the microelectronics industry. The motivation for this study is to develop an understanding of the physical phenomena involved in plasma processing and to measure much needed fundamental parameters, such as gas-phase and surface reaction rates. species

  13. Remote network control plasma diagnostic system for Tokamak T-10

    Science.gov (United States)

    Troynov, V. I.; Zimin, A. M.; Krupin, V. A.; Notkin, G. E.; Nurgaliev, M. R.

    2016-09-01

    The parameters of molecular plasma in closed magnetic trap is studied in this paper. Using the system of molecular diagnostics, which was designed by the authors on the «Tokamak T-10» facility, the radiation of hydrogen isotopes at the plasma edge is investigated. The scheme of optical radiation registration within visible spectrum is described. For visualization, identification and processing of registered molecular spectra a new software is developed using MatLab environment. The software also includes electronic atlas of electronic-vibrational-rotational transitions for molecules of protium and deuterium. To register radiation from limiter cross-section a network control system is designed using the means of the Internet/Intranet. Remote control system diagram and methods are given. The examples of web-interfaces for working out equipment control scenarios and viewing of results are provided. After test run in Intranet, the remote diagnostic system will be accessible through Internet.

  14. Improvement of cell adhesion on poly(L-lactide) by atmospheric plasma treatment.

    Science.gov (United States)

    Nakagawa, Masafumi; Teraoka, Fumio; Fujimoto, Shinji; Hamada, Yoshinosuke; Kibayashi, Hiroyuki; Takahashi, Junzo

    2006-04-01

    The purpose of this study is to elucidate the interaction between the cell and the surface of poly(L-lactide) (PLLA) samples, which were modified using a low-temperature plasma treatment apparatus at atmospheric pressure. The plasma treatments were carried out in the atmospheres of air, carbon dioxide (CO2), and perfluoro propane (C3F8) gas. The PLLA samples before and after the plasma treatment were analyzed by XPS and their contact angles with water. Furthermore, the cell adhesion capability and cell mass culturing tests on the PLLA samples were carried out using MC3T3-E1 cells. The results showed that the contact angle of the samples, which was plasma treated in air or in CO2 gas, decreased compared with that of the untreated samples. On the other hand, the contact angle of the samples, which was plasma treated in the C3F8 gas, increased compared with the untreated plasma samples. The cell response on the PLLA samples plasma treated in air or in the CO2 gas were significantly superior to that of the PLLA samples, which was plasma treated in the C3F8 gas.

  15. Infiltrative treatment with Platelet Rich Plasma (PRP) in gonarthrosis

    OpenAIRE

    2014-01-01

    The aim of the study is to evaluate and to quantify the effects on the quality of life and the decrease of pain in short and middle term in patients affected of gonarthrosis and treated with a series of 3 injections of Platelet Rich Plasma (PRP).

  16. Platelet rich plasma for treatment of nonhealing diabetic foot ulcers: a case report.

    Science.gov (United States)

    Mehrannia, Masoud; Vaezi, Mitra; Yousefshahi, Fardin; Rouhipour, Nahid

    2014-02-01

    Diabetic foot ulcers are one of the most important causes of lower limb amputations worldwide. The conventional treatments of diabetic foot ulcers are costly and often require patients to be hospitalized for long periods of time, thus representing a huge burden on any health care system. The use of autologous platelet-rich plasma (PRP), which is rich in multiple growth factors, may bear some similarities to the natural wound healing process. Nonetheless, few studies on human subjects have so far addressed the efficacy of PRP as a novel and minimally invasive treatment. Today, there is only 1 approved and available system to separate PRP from a patient's own blood in order to be used in diabetic ulcers. This system incorporates bovine thrombin for activation of PRP gel and may be applied by many healthcare providers without the need for extensive special training. In this report, a patient with extensive diabetic foot ulcers, non-responsive to other treatment modalities, was successfully treated by PRP. Copyright © 2014 Canadian Diabetes Association. Published by Elsevier Inc. All rights reserved.

  17. Atmospheric air-plasma treatment of polyester fiber to improve the performance of nanoemulsion silicone

    Energy Technology Data Exchange (ETDEWEB)

    Parvinzadeh, Mazeyar, E-mail: mparvinzadeh@gmail.com [Department of Textile, Islamic Azad University, Shahre Rey Branch, Tehran (Iran, Islamic Republic of); Ebrahimi, Izadyar [Young Researchers Club, Islamic Azad University, Shahre Rey Branch, Tehran (Iran, Islamic Republic of)

    2011-02-15

    Influence of atmospheric air plasma treatment on performance of nanoemulsion silicone softener on polyethylene terephthalate fibers was investigated by the use of fourier transform infrared spectroscopy (FTIR), bending lengths (BL), wrinkle recovery angles (WRA), fiber friction coefficient analysis (FFCA), moisture absorbency (MA), scanning electron microscopy (SEM) and reflectance spectroscopy (RS). Results indicated that the plasma pretreatment modifies the surface of fibers and increases the reactivity of substrate toward nanoemulsion silicone. Moisture regain and microscopic tests showed that the combination of plasma and silicone treatments on polyethylene terephthalate can decrease moisture absorption due to uniform coating of silicone emulsion on surface of fibers.

  18. Levels of cell-free DNA and plasma KRAS during treatment of advanced NSCLC

    DEFF Research Database (Denmark)

    Dowler Nygaard, Anneli; Spindler, Karen-Lise Garm; Pallisgaard, Niels

    2014-01-01

    be analysed in plasma and may increase the scientific use of such measurements. In the present study, we investigated: i) the dynamics of cfDNA and plasma mutated KRAS (pmKRAS) during the treatment of patients with advanced NSCLC; and ii) the prognostic value of baseline cfDNA and pmKRAS. Sixty‑nine patients...... were included in a prospective biomarker trial. Inclusion criteria included advanced NSCLC, candidate for first-line treatment, no previous cancer within the five years prior to this study. Blood samples were drawn at baseline, day 8 and at progression. Analyses of cfDNA and KRAS mutations in plasma...

  19. Simultaneous treatment of low-level miscellaneous solid waste by thermal plasma

    Energy Technology Data Exchange (ETDEWEB)

    Amakawa, T.; Adachi, K.; Yasui, S. [Central Research Institute of Electric Power Industry, Kanagawa (Japan)

    2001-07-01

    Volume reduction is a cost saving method for the final disposal of radioactive waste. On one hand, arc plasma heating can provide sufficient heat independent of the chemical and physical properties of waste, therefore enabling stable heating at high treatment rates. CRIEPI (central research institute of electric power industry) focused on the advantages of arc plasma heating, and has clarified that arc plasma heating can be used in a simultaneous melting treatment process for low-level miscellaneous mixed solid waste, generated from nuclear power plants for volume reduction, and in the stabilization of radionuclides. (authors)

  20. Plasma nitriding of AISI 52100 ball bearing steel and effect of heat treatment on nitrided layer

    Indian Academy of Sciences (India)

    Ravindra Kumar; J Alphonsa; Ram Prakash; K S Boob; J Ghanshyam; P A Rayjada; P M Raole; S Mukherjee

    2011-02-01

    In this paper an effort has been made to plasma nitride the ball bearing steel AISI 52100. The difficulty with this specific steel is that its tempering temperature (∼170–200°C) is much lower than the standard processing temperature (∼460–580°C) needed for the plasma nitriding treatment. To understand the mechanism, effect of heat treatment on the nitrided layer steel is investigated. Experiments are performed on three different types of ball bearing races i.e. annealed, quenched and quench-tempered samples. Different gas compositions and process temperatures are maintained while nitriding these samples. In the quenched and quench-tempered samples, the surface hardness has decreased after plasma nitriding process. Plasma nitriding of annealed sample with argon and nitrogen gas mixture gives higher hardness in comparison to the hydrogen–nitrogen gas mixture. It is reported that the later heat treatment of the plasma nitrided annealed sample has shown improvement in the hardness of this steel. X-ray diffraction analysis shows that the dominant phases in the plasma nitrided annealed sample are (Fe2−3N) and (Fe4N), whereas in the plasma nitrided annealed sample with later heat treatment only -Fe peak occurs.

  1. Integrated thermal treatment system study -- Phase 2 results. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Feizollahi, F.; Quapp, W.J.

    1996-02-01

    This report presents the second phase of a study on thermal treatment technologies. The study consists of a systematic assessment of nineteen thermal treatment alternatives for the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the MLLW. The alternatives considered in Phase 2 were innovative thermal treatments with nine types of primary processing units. Other variations in the study examined the effect of combustion gas, air pollution control system design, and stabilization technology for the treatment residues. The Phase 1 study examined ten initial thermal treatment alternatives. The Phase 2 systems were evaluated in essentially the same manner as the Phase 1 systems. The alternatives evaluated were: rotary kiln, slagging kiln, plasma furnace, plasma gasification, molten salt oxidation, molten metal waste destruction, steam gasification, Joule-heated vitrification, thermal desorption and mediated electrochemical oxidation, and thermal desorption and supercritical water oxidation. The quantities, and physical and chemical compositions, of the input waste used in the Phase 2 systems differ from those in the Phase 1 systems, which were based on a preliminary waste input database developed at the onset of the Integrated Thermal Treatment System study. The inventory database used in the Phase 2 study incorporates the latest US Department of Energy information. All systems, both primary treatment systems and subsystem inputs, have now been evaluated using the same waste input (2,927 lb/hr). 28 refs., 88 figs., 41 tabs.

  2. HARDENING OF CRANE RAILS BY PLASMA DISCRETE-TIME SURFACE TREATMENT

    Directory of Open Access Journals (Sweden)

    S. S. Samotugin

    2017-01-01

    Full Text Available Crane wheels and rails are subjected to intensive wear in the process of operation. Therefore, improvement of these components’ performance can be considered a task of high importance. A promising direction in this regard is surface treatment by highly concentrated energy flows such as laser beams or plasma jets. This thesis suggests that the use of gradient plasma surface treatment can improve the performance of crane rails. A research was conducted, according to which hardened zones were deposited on crane rails under different treatment modes. Microhardness was measured both at the surface and in depth using custom-made microsections. The article includes the results of study of plasma surface hardening effects on wear resistance of crane rails. Change of plasma surface treatment parameters (current, plasma torch movement speed, argon gas flow rate allows for desired steel hardness and structure, while the choice of optimal location for hardened zones makes it possible to significantly improve wear resistance and crack resistance. As a result of plasma surface hardening, the fine-grained martensite structure is obtained with mainly lamellar morphology and higher hardness rate compared toinduction hardening or overlaying. Wear test of carbon steels revealed that plasma surfacing reduces abrasive wear rate compared to the irinitial state by 2 to 3 times. Enough sharp boundary between hardened and non-hardened portions has a positive effect on the performance of parts under dynamic loads, contributing to the inhibition of cracks during the transition from solid to a soft metal. For carbon and low alloy rail steels, the properties achieved by plasma surface hardening can effectively replace induction hardening or overlaying.The mode range for plasma surface treatment that allow sobtaining a surface layer with certain operating properties has been determined.

  3. Evaluation of treatment and disinfection of water using cold atmospheric plasma.

    Science.gov (United States)

    Rashmei, Zohreh; Bornasi, Hamid; Ghoranneviss, Mahmood

    2016-08-01

    In this paper, the disinfection of water is investigated using plasma spark treatment and the results are compared with conventional techniques. Inactivation of the Enterococcus faecalis and Escherichia coli bacteria is considered in the treatment process of water by the plasma spark. For this purpose, many physical and chemical parameters of water are measured and the obtained results demonstrate a reduction of 8-log in colony forming units of E. coli and E. faecalis at 15 minutes and 12 minutes, respectively. The results of this research show that no ozone is produced during the plasma spark treatment. Moreover, inactivation of a large number of bacteria without any change of pH shows that pH is not the cause of the bacterial inactivation. It is concluded that the main causes of the inactivation of bacteria in the treated water are H2O2 molecules and the electrical fields generated by plasma.

  4. DYNAMIC ADHESIVE WETTABILITY OF POPLAR VENEER WITH COLD OXYGEN PLASMA TREATMENT

    Directory of Open Access Journals (Sweden)

    Lijuan Tang,

    2012-06-01

    Full Text Available Effects of cold oxygen plasma treatment on activating the surface of poplar veneers and improving its wettability were investigated. The veneers were treated with cold oxygen plasma for 1, 3, 5, 7, and 9 min, and aged in air for 1, 3, 7, 14, 21, and 28 days. The dynamic adhesive wettability of veneers was assessed using the contact angle, K-value analysis, and surface free energy. The shear strength of three-layer panels produced from untreated and cold oxygen plasma treated veneers was examined. The results showed that the wettability of veneer was significantly improved after cold oxygen plasma treatment, leading to the enhancement of shear strength of panels. The optimized treatment time should be 7 min. Aging effect of treated veneers showed that the veneer surface wettability degraded within the first 7 days and thereafter changed slightly.

  5. Plasma Membranes Modified by Plasma Treatment or Deposition as Solid Electrolytes for Potential Application in Solid Alkaline Fuel Cells

    OpenAIRE

    Christophe Coutanceau; Marc Reinholdt; Jean Durand; Valérie Flaud; Serguei Martemianov; Alina Ilie; Eric Beche; Stéphanie Roualdès; Mauricio Schieda; Jérémy Frugier

    2012-01-01

    In the highly competitive market of fuel cells, solid alkaline fuel cells using liquid fuel (such as cheap, non-toxic and non-valorized glycerol) and not requiring noble metal as catalyst seem quite promising. One of the main hurdles for emergence of such a technology is the development of a hydroxide-conducting membrane characterized by both high conductivity and low fuel permeability. Plasma treatments can enable to positively tune the main fuel cell membrane requirements. In this work, com...

  6. Plasma D-dimer concentration in patients with systemic sclerosis

    Directory of Open Access Journals (Sweden)

    Montagnana Martina

    2006-01-01

    Full Text Available Abstract Background Systemic sclerosis (SSc is an autoimmune disorder of the connective tissue characterized by widespread vascular lesions and fibrosis. Little is known so far on the activation of the hemostatic and fibrinolytic systems in SSc, and most preliminary evidences are discordant. Methods To verify whether SSc patients might display a prothrombotic condition, plasma D-dimer was assessed in 28 consecutive SSc patients and in 33 control subjects, matched for age, sex and environmental habit. Results and discussion When compared to healthy controls, geometric mean and 95% confidence interval (IC95% of plasma D-dimer were significantly increased in SSc patients (362 ng/mL, IC 95%: 361–363 ng/mL vs 229 ng/mL, IC95%: 228–231 ng/mL, p = 0.005. After stratifying SSc patients according to disease subset, no significant differences were observed between those with limited cutaneous pattern and controls, whereas patients with diffuse cutaneous pattern displayed substantially increased values. No correlation was found between plasma D-dimer concentration and age, sex, autoantibody pattern, serum creatinine, erythrosedimentation rate, nailfold videocapillaroscopic pattern and pulmonary involvement. Conclusion We demonstrated that SSc patients with diffuse subset are characterized by increased plasma D-dimer values, reflecting a potential activation of both the hemostatic and fibrinolytic cascades, which might finally predispose these patients to thrombotic complications.

  7. Hybrid Plasma Reactor/Filter for Transportable Collective Protection Systems

    Energy Technology Data Exchange (ETDEWEB)

    Josephson, Gary B.; Tonkyn, Russell G.; Frye, J. G.; Riley, Brian J.; Rappe, Kenneth G.

    2011-04-06

    Pacific Northwest National Laboratory (PNNL) has performed an assessment of a Hybrid Plasma/Filter system as an alternative to conventional methods for collective protection. The key premise of the hybrid system is to couple a nonthermal plasma (NTP) reactor with reactive adsorption to provide a broader envelope of protection than can be provided through a single-solution approach. The first step uses highly reactive species (e.g. oxygen radicals, hydroxyl radicals, etc.) created in a nonthermal plasma (NTP) reactor to destroy the majority (~75% - 90%) of an incoming threat. Following the NTP reactor an O3 reactor/filter uses the O3 created in the NTP reactor to further destroy the remaining organic materials. This report summarizes the laboratory development of the Hybrid Plasma Reactor/Filter to protect against a ‘worst-case’ simulant, methyl bromide (CH3Br), and presents a preliminary engineering assessment of the technology to Joint Expeditionary Collective Protection performance specifications for chemical vapor air purification technologies.

  8. Experiments on Plasma Injection into a Centrifugally Confined System

    Science.gov (United States)

    Messer, S.; Bomgardner, R.; Brockington, S.; Case, A.; Witherspoon, F. D.; Uzun-Kaymak, I.; Elton, R.; Young, W.; Teodorescu, C.; Morales, C. H.; Ellis, R. F.

    2009-11-01

    We describe the cross-field injection of plasma into a centrifugally-confined system. Two different types of plasma railgun have been installed on the Maryland Centrifugal Experiment (MCX) in an attempt to drive that plasma's rotation. The initial gun was a coaxial device designed to mitigate the blowby instability. The second one was a MiniRailgun with a rectangular bore oriented so that the MCX magnetic field augments the railgun's internal magnetic field. Tests at HyperV indicate this MiniRailgun reaches much higher densities than the original gun, although muzzle velocity is slightly reduced. We discuss the impact of these guns on MCX for various conditions. Initial results show that even for a 2 kG field, firing the MiniRailgun modifies oscillations of the MCX diamagnetic loops and can impact the core current and voltage. The gun also has a noticeable impact on MCX microwave emissions. These observations suggest plasma enters the MCX system. We also compare diagnostic data collected separately from MCX for these and other guns, focussing primarily on magnetic measurements.

  9. Plasma treatment for improving cell biocompatibility of a biodegradable polymer scaffold for vascular graft applications.

    Science.gov (United States)

    Valence, Sarra de; Tille, Jean-Christophe; Chaabane, Chiraz; Gurny, Robert; Bochaton-Piallat, Marie-Luce; Walpoth, Beat H; Möller, Michael

    2013-09-01

    Biodegradable synthetic scaffolds are being evaluated by many groups for the application of vascular tissue engineering. In addition to the choice of the material and the structure of the scaffold, tailoring the surface properties can have an important effect on promoting adequate tissue regeneration. The objective of this study was to evaluate the effect of an increased hydrophilicity of a polycaprolactone vascular graft by treatment with a cold air plasma. To this end, treated and untreated scaffolds were characterized, evaluated in vitro with smooth muscle cells, and implanted in vivo in the rat model for 3 weeks, both in the subcutaneous location and as an aortic replacement. The plasma treatment significantly increased the hydrophilicity of the scaffold, with complete wetting after a treatment of 60 sec, but did not change fiber morphology or mechanical properties. Smooth muscle cells cultured on plasma treated patches adopt a spread out morphology compared to a small, rounded morphology on untreated patches. Subcutaneous implantation revealed a low foreign body reaction for both types of scaffolds and a more extended and dense cellular infiltrate in the plasma treated scaffolds. In the vascular position, the plasma treatment induced a better cellularization of the graft wall, while it did not affect endothelialization rate or intimal hyperplasia. Plasma treatment is therefore an accessible tool to easily increase the biocompatibility of a scaffold and accelerate tissue regeneration without compromising mechanical strength, which are valuable advantages for vascular tissue engineering.

  10. Reversible tuning of ZnO optical band gap by plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Szetsen, E-mail: slee@cycu.edu.tw [Department of Chemistry and Center for Nano-technology, Chung Yuan Christian University, Jhongli, Taoyuan 32023, Taiwan (China); Peng, Jr-Wei [Department of Chemistry and Center for Nano-technology, Chung Yuan Christian University, Jhongli, Taoyuan 32023, Taiwan (China); Ho, Ching-Yuan [Department of Mechanical Engineering, Chung Yuan Christian University, Jhongli, Taoyuan 32023, Taiwan (China)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer The ZnO optical band gap blue-shifts with hydrogen plasma treatment. Black-Right-Pointing-Pointer The ZnO optical band gap red-shifts with oxygen plasma treatment. Black-Right-Pointing-Pointer The ZnO optical band gap can be reversibly fine-tuned. - Abstract: Zinc oxide (ZnO) films synthesized by reacting zinc nitrate with hexamethylenetetramine were treated with hydrogen and oxygen plasmas. From UV-visible absorption and optical emission inspection, we have found that the optical band gap of ZnO films blue-shifted with hydrogen plasma treatment, but red-shifted with oxygen plasma treatment. By alternating the treatment sequence of hydrogen and oxygen plasmas, the ZnO optical band gap can be reversibly fine-tuned with the tunable range up to 80 meV. Scanning electron microscopy characterization indicates that the variation of the optical band gap is attributed to the competition between amorphous and crystalline forms of ZnO. The mechanism of reversible optical band gap tuning is discussed.

  11. First results from the MAST digital plasma control system

    Energy Technology Data Exchange (ETDEWEB)

    McArdle, G.J. E-mail: graham.mcardle@ukaea.org.uk; Storrs, J

    2004-06-01

    The mega-amp spherical tokamak (MAST) has operated under a new digital plasma control system [Fusion Eng. Des. 66-68 (2003) 761]. The new system, based on commercially available VME hardware, has replaced most of the old analogue control electronics [Fusion Eng. Des. 56-57 (2001) 749] with algorithms implemented in the control software. General Atomics provided their PCS [B.G. Penaflor, J.R. Ferron, M.L. Walker, A structured architecture for advanced plasma control experiments, in: Proceedings of the 19th SOFT, vol. 1, Lisbon, Portugal, 1996, p. 965] software infrastructure as a generic framework for a plasma control system. A powerful configuration tool has been developed to generate the MAST-specific code from a set of structured documents written in extensible mark-up language (XML). This enables rapid development of new control algorithms and permits safe re-configuration of the code layout, whilst maintaining the coherence of multiple cross-references. The initial algorithm set emulates the behaviour of the original analogue control hardware where it is sensible to do so, but implements several new plant protection capabilities that were previously too difficult to provide with analogue electronics. Shots previously run with the old system can be converted to run in the new system, thus allowing previous campaigns to be continued without the need to develop new scenarios. During the present engineering break, a new suite of algorithms is being developed to provide plasma boundary reconstruction and control functions that fully exploit the capabilities of the digital system.

  12. Formation of functional groups on graphite during oxygen plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Cvelbar, Uros [Plasma Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana SI-1000 (Slovenia)]. E-mail: uros.cvelbar@guest.arnes.si; Markoli, Bostjan [Faculty of Natural Sciences and Engineering, University of Ljubljana, Askerceva 12, Ljubljana SI-1000 (Slovenia); Poberaj, Igor [Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, Ljubljana SI-1000 (Slovenia); Zalar, Anton [Plasma Laboratory, Jozef Stefan Institute, Jamova 39, Ljubljana SI-1000 (Slovenia); Kosec, Ladislav [Faculty of Natural Sciences and Engineering, University of Ljubljana, Askerceva 12, Ljubljana SI-1000 (Slovenia); Spaic, Savo [Faculty of Natural Sciences and Engineering, University of Ljubljana, Askerceva 12, Ljubljana SI-1000 (Slovenia)

    2006-12-15

    Improved sample wettability was obtained by oxygen plasma functionalization of pyrolytic graphite. The samples were exposed to highly dissociated oxygen plasma with the density of 1 x 10{sup 16} m{sup -3}, the electron temperature of about 5.5 eV and the density of neutral oxygen atoms of 8 x 10{sup 21} m{sup -3} for 20 s. The surface wettability was measured by a contact angle of water drop. The contact angle dropped from original 112{sup o} down to about 1{sup o}. The functional groups were detected by XPS analyses. The survey spectrum showed a substantial increase of oxygen concentration on the surface, while high-resolution analyses showed additional oxygen was bonded onto the graphite surface in the form of C-O polar functional group responsible for the increase of the surface energy.

  13. Lack of plasma kallikrein-kinin system cascade in teleosts.

    Directory of Open Access Journals (Sweden)

    Marty Kwok-Shing Wong

    Full Text Available The kallikrein-kinin system (KKS consists of two major cascades in mammals: "plasma KKS" consisting of high molecular-weight (HMW kininogen (KNG, plasma kallikrein (KLKB1, and bradykinin (BK; and "tissue KKS" consisting of low molecular-weight (LMW KNG, tissue kallikreins (KLKs, and [Lys(0]-BK. Some components of the KKS have been identified in the fishes, but systematic analyses have not been performed, thus this study aims to define the KKS components in teleosts and pave a way for future physiological and evolutionary studies. Through a combination of genomics, molecular, and biochemical methods, we showed that the entire plasma KKS cascade is absent in teleosts. Instead of two KNGs as found in mammals, a single molecular weight KNG was found in various teleosts, which is homologous to the mammalian LMW KNG. Results of molecular phylogenetic and synteny analyses indicated that the all current teleost genomes lack KLKB1, and its unique protein structure, four apple domains and one trypsin domain, could not be identified in any genome or nucleotide databases. We identified some KLK-like proteins in teleost genomes by synteny and conserved domain analyses, which could be the orthologs of tetrapod KLKs. A radioimmunoassay system was established to measure the teleost BK and we found that [Arg(0]-BK is the major circulating form instead of BK, which supports that the teleost KKS is similar to the mammalian tissue KKS. Coincidently, coelacanths are the earliest vertebrate that possess both HMW KNG and KLKB1, which implies that the plasma KKS could have evolved in the early lobe-finned fish and descended to the tetrapod lineage. The co-evolution of HMW KNG and KLKB1 in lobe-finned fish and early tetrapods may mark the emergence of the plasma KKS and a contact activation system in blood coagulation, while teleosts may have retained a single KKS cascade.

  14. Treatment of textile surfaces by plasma technology for biomedical applications

    OpenAIRE

    Labay, Cédric

    2014-01-01

    Medical applications of technical textiles are an expanding field of research. One of the added values of these new materials would be that they were suitable to contain and release active compounds in a controlled and sustained manner. Drug incorporation and release from synthetic fibers is related to the interaction of the drug with the polymer and probably greatly depends on the surface chemistry of the fiber. Plasma technology is a tool that enables to modify physical and chemical prop...

  15. Effect of argon plasma treatment on the output performance of triboelectric nanogenerator

    Science.gov (United States)

    Cheng, Guang-Gui; Jiang, Shi-Yu; Li, Kai; Zhang, Zhong-Qiang; Wang, Ying; Yuan, Ning-Yi; Ding, Jian-Ning; Zhang, Wei

    2017-08-01

    Physical and chemical properties of the polymer surface play great roles in the output performance of triboelectric nanogenerator (TENG). Specific texture on the surface of polymer can enlarge the contact area and enhance the power output performance of TENG. In this paper, polydimethylsiloxane (PDMS) films with smooth and micro pillar arrays on the surface were prepared respectively. The surfaces were treated by argon plasma before testing their output performance. By changing treatment parameters such as treating time and plasma power, surfaces with different roughness and their relationship were achieved. The electrical output performances of the assembled TENG for each specimen showed that argon plasma treatment has a significant etching effect on the PDMS surface and greatly strengthen its output performance. The average surface roughness of PDMS film increases with the etching time from 5 mins to 15 mins when the argon plasma power is 60 W. Nevertheless, the average surface roughness is inversely proportional to the treatment time for the power of 90W. When treated with 90 W and 5 mins, many uniform micro pillars appeared on the both PDMS surface, and the output performance of the TENG for plasma treated smooth surface is 2.6 times larger than that before treatment. The output voltage increases from 42 V to 72 V, and the short circuit current increases from 4.2 μA to 8.3 μA after plasma treatment of the micro pillar array surface. However, this plasma treatment has time-efficient due to the hydrophobic recovery property of Ar plasma treated PDMS surface, both output voltage and short circuit current decrease significantly after 3 months.

  16. Surface functionalization of macroporous polymeric materials by treatment with air low temperature plasma.

    Science.gov (United States)

    Molina, R; Sole, I; Vílchez, A; Bertran, E; Solans, C; Esquena, J

    2013-04-01

    Polystyrene/divinylbenzene (PS-DVB) macroporous monoliths obtained using highly concentrated emulsions as templates show a superhydrophobic behaviour, restricting their potential technological applications, especially those related to adhesion and wetting. Air plasma treatments were carried out in order to modulate wetting properties, modifying the surface chemical composition of macroporous polystyrene/divinylbenzene materials. The superhydrophobic behaviour was rapidly suppressed by air plasma treatment, greatly reducing the water contact angle, from approximately 150 degrees to approximately 90 degrees, in only 10 seconds of treatment. The new surface chemical groups, promoted by plasma active species, were characterized by surface analysis techniques with different depth penetration specificity (contact angle, XPS, FTIR and SEM). Results demonstrated that very short treatment times produced different chemical functionalities, mainly C-O, C=O, O-C=O and C-N, which provide the materials with predominantly acidic surface properties. However, plasma active species did not penetrate deeply through the interconnected pores of the material. FTIR analysis evidenced that the new hydrophilic surface groups promoted by plasma active species are in a negligibly concentration compared to bulk chemical groups, and are located in a very thin surface region on the PS-DVB monolith surface (significantly below 2 microm). XPS analysis of treated monoliths revealed a progressive increase of oxygen and nitrogen content as a function of plasma treatment time. However, oxidation of the PS-DVB monoliths surface prevails over the incorporation of nitrogen atoms. Finally, SEM studies indicated that the morphology of the plasma treated PS-DVB does not significantly change even for the longest air plasma treatment time studied (120 s).

  17. Fungicidal Effects of Plasma and Radio-Wave Pre-treatments on Seeds of Grain Crops and Legumes

    Science.gov (United States)

    Filatova, Irina; Azharonok, Viktor; Shik, Alexander; Antoniuk, Alexandra; Terletskaya, Natalia

    An influence of RF plasma and RF electromagnetic field pre-treatments on level of fungal infection of some important agricultural plants has been studied. It is shown that pre-sowing plasma and radio-wave seeds treatments contribute to their germination enhancement and plant productivity improvement owing to stimulative and fungicidal effect of plasma and RF electromagnetic field irradiation.

  18. Application of non-equilibrium plasmas in treatment of wool fibers and seeds

    Science.gov (United States)

    Petrović, Zoran

    2003-10-01

    While large effort is under way to achieve stable, large area, non-equilibrium plasma reactors operating at atmospheric pressure we should still consider application of low pressure reactors, which provide well defined, easily controlled reactive plasmas. Therefore, the application of low pressure rf plasmas for the treatment of wool and seed was investigated. The studies were aimed at establishing optimal procedure to achieve better wettability, dyeability and printability of wool. Plasma treatment led to a modification of wool fiber topography and formation of new polar functional groups inducing the increase of wool hydrophylicity. Plasma activation of fiber surface was also used to achieve better binding of biopolymer chitosan to wool in order to increase the content of favorable functional groups and thus improving sorption properties of recycled wool fibers for heavy metal ions and acid dyes. In another study, the increase of germination percentage of seeds induced by plasmas was investigated. We have selected dry (unimbibed) Empress tree seeds (Paulownia tomentosa Steud.). Empress tree seed has been studied extensively and its mechanism of germination is well documented. Germination of these seeds is triggered by light in a limited range of wavelengths. Interaction between activated plasma particles and seed, inside the plasma reactor, leads to changes in its surface topography, modifies the surface layer and increases the active surface area. Consequently, some bioactive nitrogeneous compounds could be bound to the activated surface layer causing the increment of germination percentage.

  19. Enhancement in biological response of Ag-nano composite polymer membranes using plasma treatment for fabrication of efficient bio materials

    Science.gov (United States)

    Agrawal, Narendra Kumar; Sharma, Tamanna Kumari; Chauhan, Manish; Agarwal, Ravi; Vijay, Y. K.; Swami, K. C.

    2016-05-01

    Biomaterials are nonviable material used in medical devices, intended to interact with biological systems, which are becoming necessary for the development of artificial material for biological systems such as artificial skin diaphragm, valves for heart and kidney, lenses for eye etc. Polymers having novel properties like antibacterial, antimicrobial, high adhesion, blood compatibility and wettability are most suitable for synthesis of biomaterial, but all of these properties does not exist in any natural or artificial polymeric material. Nano particles and plasma treatment can offer these properties to the polymers. Hence a new nano-biomaterial has been developed by modifying the surface and chemical properties of Ag nanocomposite polymer membranes (NCPM) by Argon ion plasma treatment. These membranes were characterized using different techniques for surface and chemical modifications occurred. Bacterial adhesion and wettability were also tested for these membranes, to show direct use of this new class of nano-biomaterial for biomedical applications.

  20. Effects of oxygen plasma treatment on the surface wettability and dissolution of furosemide compacts.

    Science.gov (United States)

    Naseem, A; Olliff, C J; Martini, L G; Lloyd, A W

    2003-11-01

    The plasma irradiation of furosemide (frusemide) was investigated as a possible technique for increasing the dissolution rate of this drug. Oxygen plasma was used to generate oxygen-containing functional groups on the surface of the compact to increase the wettability of the surface and the dissolution rate of the drug. Compacts of furosemide (300 mg) were produced using a stainless steel die and punch assembly, which was placed into a KBr press. The time of the plasma treatment was varied to assess the effect if any upon the dissolution rate and the wettability of the drug. Dissolution experiments of the plasma-treated and untreated compacts were carried out using the paddle apparatus method. Dissolution was carried out at 37 degrees C using 1 L of 0.1 M HCl and phosphate buffer (pH 6). The wettability was assessed by contact angle measurements using the sessile drop technique. Untreated and plasma-treated samples were analysed by scanning electron microscopy at x 5000 magnification. Plasma treatment was found to lower the equilibrium contact angle from approximately 50 to 35 degrees but the dissolution rate was not significantly affected. This was attributed to fusion of the surface by the plasma treatment.

  1. Plasma treatment of Seeds: effect on growth, spores and bacterial charge

    Science.gov (United States)

    Ambrico, P. F.; Simek, M.; Morano, M.; Ambrico, M.; Minafra, A.; Prukner, V.; de Miccolis Angelini, R. M.; Trotti, P.

    2016-09-01

    We report on the effect of low temperature plasma treatment on tomato, basil and tobacco commercial seeds. Seeds were treated in filtered ambient air volume, surface and plasma jet DBD at atmospheric pressure Sterile agar substrate, supplemented with a nutrient and vitamin mixture, was used to allow seeds germination in sterilized sealed plastic containers. The seeds were stored in controlled environmental condition (T = 26C, cycle of 14hrs light/10hrs dark condition). Since all the procedure was performed under sterile conditions, only bacteria and fungi carried by seeds could grow. Plasma treatment significantly reduced the presence of bacterial contamination, while some fungi could resist at shortest exposures Seeds germination was then followed by time lapse photography in sterile water on 3MM Whatman paper in a closed container. The effect of plasma treatment was a faster germination time of seeds and emergence of cotyledons, able to start photosynthesis in seedlings.The plasma treated seeds were also sow in a soil/peat moss mixture. Plants were cultivated for about 40 days, showing that plasma induced a faster growth in length and weight with respect to untreated seeds.Furthermore the effect of plasma on seeds surface was studied by SEM imaging. We acknowledge `SELGE' (Puglia) and TACR (TA03010098).

  2. Effects of plasma treatment on surface properties of ultrathin layered MoS2

    Science.gov (United States)

    Kim, Suhhyun; Choi, Min Sup; Qu, Deshun; Ra, Chang Ho; Liu, Xiaochi; Kim, Minwoo; Song, Young Jae; Jong Yoo, Won

    2016-09-01

    This work investigates the use of oxygen plasma (O2) treatment, applied as an inductively coupled plasma, to control the thickness and work function of a MoS2 layer. Plasma-etched MoS2 exhibited a surface roughness similar to that of the pristine MoS2. The MoS2 field effect transistors fabricated using the plasma-etched MoS2 displayed a higher n-type doping concentration than that of pristine MoS2. The x-ray photoelectron spectroscopy was performed to analyze chemical composition to demonstrate the minimum level of chemical reactions occurred upon plasma treatment. Moreover, Kelvin probe force microscopy measurements were conducted to probe the changes in the work function that could be attributed to the changes in the surface potential. The measured work functions suggest the modification of a band structure and n-doping effect after plasma treatments that depended on the number of MoS2 layers. This study suggests that the O2 plasma can control the layer number of the MoS2 as well as the electronic properties of a MoS2 film.

  3. Treatment of severe refractory pruritus with fractionated plasma separation and adsorption (Prometheus).

    Science.gov (United States)

    Rifai, Kinan; Hafer, Carsten; Rosenau, Jens; Athmann, Christoph; Haller, Hermann; Peter Manns, Michael; Fliser, Danilo

    2006-10-01

    Severe pruritus is a serious complication of cholestatic liver disease. Prometheus is a recently introduced extracorporeal liver support system with direct toxin adsorption of the patient's albumin fraction (FPSA; fractionated plasma separation and adsorption). Here we report on the effect of Prometheus therapy in patients with intractable cholestatic pruritus. Seven patients with different liver diseases and severe pruritus refractory to all medical treatment efforts for more than 4 weeks were treated with Prometheus (3-5 times, 18+/-3 h total). Pruritus intensity was assessed using the visual analogue scale (VAS; from 0 = no pruritus to 10 = unbearable pruritus), and VAS, serum bile acids and total bilirubin were evaluated directly before and after Prometheus treatment, as well as 4 weeks later. After Prometheus therapy, VAS values had dropped significantly from 9+/-1 to 3+/-3 (pPrometheus therapy, although in two anicteric patients the amelioration lasted only a few days. In the other four patients a distinct benefit was still observed 4 weeks after the treatment. Prometheus therapy significantly improved refractory pruritus in all patients with elevated bile acid levels, but in some patients the clinical benefit was of short duration. The clinical findings suggest that we have to better characterize those patients who might derive a long-lasting benefit from this invasive and expensive treatment.

  4. WASTE TREATMENT BUILDING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    F. Habashi

    2000-06-22

    The Waste Treatment Building System provides the space, layout, structures, and embedded subsystems that support the processing of low-level liquid and solid radioactive waste generated within the Monitored Geologic Repository (MGR). The activities conducted in the Waste Treatment Building include sorting, volume reduction, and packaging of dry waste, and collecting, processing, solidification, and packaging of liquid waste. The Waste Treatment Building System is located on the surface within the protected area of the MGR. The Waste Treatment Building System helps maintain a suitable environment for the waste processing and protects the systems within the Waste Treatment Building (WTB) from most of the natural and induced environments. The WTB also confines contaminants and provides radiological protection to personnel. In addition to the waste processing operations, the Waste Treatment Building System provides space and layout for staging of packaged waste for shipment, industrial and radiological safety systems, control and monitoring of operations, safeguards and security systems, and fire protection, ventilation and utilities systems. The Waste Treatment Building System also provides the required space and layout for maintenance activities, tool storage, and administrative facilities. The Waste Treatment Building System integrates waste processing systems within its protective structure to support the throughput rates established for the MGR. The Waste Treatment Building System also provides shielding, layout, and other design features to help limit personnel radiation exposures to levels which are as low as is reasonably achievable (ALARA). The Waste Treatment Building System interfaces with the Site Generated Radiological Waste Handling System, and with other MGR systems that support the waste processing operations. The Waste Treatment Building System interfaces with the General Site Transportation System, Site Communications System, Site Water System, MGR

  5. Improvement of Surface Wettability and Hydrophilization of Poly-paraphenylene benzobisoxazole Fiber with Fibrillation Combined Oxygen Plasma Treatment

    OpenAIRE

    Xiwen Wang; Jian Hu,; Yun Liang

    2012-01-01

    A new surface modification method fibrillation combined with oxygen plasma treatment to improve the wettability and hydrophily of PBO fiber was studied in this paper. The surface chemical structure and morphology of PBO fiber were characterized by the methods of FTIR, XPS and SEM. The wettability and hydrophlic characters changes on the surface were evaluated by the dynamic contact angle system and image analysis. The results show that the increase surface roughness by fibrillation could impr...

  6. Treatment of spent ion-exchange resins in shaft-type reactor with fuel-plasma source of heating

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriev, S. A.; Knyazev, I. A.; Lifanov, F. A.; Polkanov, M. A.; Shvetsov, S. Yu; Savkin, A. E. [Moscow Scientific and Industrial Association RADON, Moscow (Russian Federation)

    1999-07-01

    The method of high-temperature conditioning the spent radioactive ion-exchange resins in combination with other combustible and incombustible radioactive waste in the plasma shaft furnace with obtaining a crystalline glass-like matrix as a final product has been developed. The method was tested on the pilot plant consisted of ceramic plasma melter, steel water-cooled shaft furnace, lined by fire-resistant concrete, and system of gas purification. The capacity of the furnace was within the limits from 10 to 15 kg/h. The volume and mass reduction factors of treated waste were 36 and 7.6, accordingly. The content of gaseous products of thermal decomposition of a waste at an output of the shaft furnace and properties of obtained slag compound were determined. Based on test results the proposals on creation of compact plasma plant for treatment of mixed radioactive waste including spent ion exchange resins were developed. (author). 3 refs., 2 tabs., 2 figs.

  7. Microseconds-scale magnetic actuators system for plasma feedback stabilization

    Science.gov (United States)

    Kogan, K.; Be'ery, I.; Seemann, O.

    2016-10-01

    Many magnetic confinement machines use active feedback stabilization with magnetic actuators. We present a novel magnetic actuators system with a response time much faster than previous ones, making it capable of coping with the fast plasma instabilities. The system achieved a response time of 3 μs with maximal current of 500 A in a coil with inductance of 5.2 μH. The system is based on commercial solid-state switches and FPGA state machine, making it easily scalable to higher currents or higher inductivity.

  8. Investigation of the effects of plasma treatments on biodeteriorated ancient paper

    Science.gov (United States)

    Laguardia, L.; Vassallo, E.; Cappitelli, F.; Mesto, E.; Cremona, A.; Sorlini, C.; Bonizzoni, G.

    2005-11-01

    Deterioration of paper-based materials is mainly due to the degradation of cellulose caused by a lot of factors such as chemical attack due to acidic hydrolysis, oxidative agent, light, air pollution and biological attack and also due to the presence of microorganisms like bacteria and fungi. It is therefore desirable to focus the research activities on restoration and conservation techniques to develop appropriate treatments. The aim of this paper is the removal or reduction of the microbial contamination and paper consolidation by means of plasma treatment. For plasma processes, different gas mixtures are utilised, and the different gas mixtures are compared as a function of pressure, power, and treatment time. To demonstrate the efficiency of the sterilisation treatment, two fungi: Aspergillus niger and Penicillium funiculosum, commonly found in libraries and archives were spread on naturally aged paper (19th century). Microorganisms were let to grow by using the organic compounds found in the historical records as a sole source of carbon and energy. The microbial abatement was measured before and after the plasma treatment by using the standard plate count method. Surface chemical and morphological characterisation of paper before and after plasma treatment has been carried out by X-ray photoelectron spectroscopy (XPS) and ATR infrared spectroscopy (ATR FTIR). The tensile strength of the plasma-treated papers was also determined. CNR Patent, n° Mi2004A000068, 21/01/2004.

  9. Enhanced Hydrophilicity and Biocompatibility of Dental Zirconia Ceramics by Oxygen Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Ching-Chou Wu

    2015-02-01

    Full Text Available Surface properties play a critical role in influencing cell responses to a biomaterial. The objectives of this study were (1 to characterize changes in surface properties of zirconia (ZrO2 ceramic after oxygen plasma treatment; and (2 to determine the effect of such changes on biological responses of human osteoblast-like cells (MG63. The results indicated that the surface morphology was not changed by oxygen plasma treatment. In contrast, oxygen plasma treatment to ZrO2 not only resulted in an increase in hydrophilicity, but also it retained surface hydrophilicity after 5-min treatment time. More importantly, surface properties of ZrO2 modified by oxygen plasma treatment were beneficial for cell growth, whereas the surface roughness of the materials did not have a significant efficacy. It is concluded that oxygen plasma treatment was certified to be effective in modifying the surface state of ZrO2 and has the potential in the creation and maintenance of hydrophilic surfaces and the enhancement of cell proliferation and differentiation.

  10. Catalytic Effect of Activated Carbon and Activated Carbon Fiber in Non-Equilibrium Plasma-Based Water Treatment

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yanzong; ZHENG Jingtang; QU Xianfeng; YU Weizhao; CHEN nonggang

    2008-01-01

    Catalysis and regeneration efficiency of granular activated carbon (GAC) and acti-vated carbon fiber (ACF) were investigated in a non-equilibrium plasma water treatment reactor with a combination of pulsed streamer discharge and GAC or ACF. The experimental results show that the degradation efficiency of methyl orange (MO) by the combined treatment can increase 22% (for GAC) and 24% (for ACF) respectively compared to pulsed discharge treatment alone, indicating that the combined treatment has a synergetic effect. The MO degradation efficiency by the combined treatment with pulsed discharge and saturated GAC or ACF can increase 12% and 17% respectively compared to pulsed discharge treatment alone. Both GAC and ACF show catalysis and the catalysis of ACF is prominent. Meanwhile, the regeneration of GAC and ACF are realized in this process. When H2O2 is introduced into the system, the utilization efficiency of ozone and ultraviolet light is improved and the regeneration efficiency of GAC and ACF is also increased.

  11. Study of plasma off-gas treatment from spent ion exchange resin pyrolysis.

    Science.gov (United States)

    Castro, Hernán Ariel; Luca, Vittorio; Banchi, Hugo Luis

    2017-03-23

    Polystyrene divinylbenzene-based ion exchange resins are employed extensively within nuclear power plants (NPPs) and research reactors for purification and chemical control of the cooling water system. To maintain the highest possible water quality, the resins are regularly replaced as they become contaminated with a range of isotopes derived from compromised fuel elements as well as corrosion and activation products including (14)C, (60)Co, (90)Sr, (129)I, and (137)Cs. Such spent resins constitute a major proportion (in volume terms) of the solid radioactive waste generated by the nuclear industry. Several treatment and conditioning techniques have been developed with a view toward reducing the spent resin volume and generating a stable waste product suitable for long-term storage and disposal. Between them, pyrolysis emerges as an attractive option. Previous work of our group suggests that the pyrolysis treatment of the resins at low temperatures between 300 and 350 °C resulted in a stable waste product with a significant volume reduction (>50%) and characteristics suitable for long-term storage and/or disposal. However, another important issue to take into account is the complexity of the off-gas generated during the process and the different technical alternatives for its conditioning. Ongoing work addresses the characterization of the ion exchange resin treatment's off-gas. Additionally, the application of plasma technology for the treatment of the off-gas current was studied as an alternative to more conventional processes utilizing oil- or gas-fired post-combustion chambers operating at temperatures in excess of 1000 °C. A laboratory-scale flow reactor, using inductively coupled plasma, operating under sub-atmospheric conditions was developed. Fundamental experiments using model compounds have been performed, demonstrating a high destruction and removal ratio (>99.99%) for different reaction media, at low reactor temperatures and moderate power

  12. Reduction of a thin chromium oxide film on Inconel surface upon treatment with hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Vesel, Alenka, E-mail: alenka.vesel@guest.arnes.si [Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Mozetic, Miran [Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Balat-Pichelin, Marianne [PROMES-CNRS Laboratory, 7 Rue du four solaire, 66120 Font Romeu Odeillo (France)

    2016-11-30

    Highlights: • Oxidized Inconel alloy was exposed to hydrogen at temperatures up to 1500 K. • Oxide reduction in hydrogen plasma started at approximately 1300 K. • AES depth profiling revealed complete reduction of oxides in plasma. • Oxides were not reduced, if the sample was heated just in hydrogen atmosphere. • Surface of reduced Inconel preserved the same composition as the bulk material. - Abstract: Inconel samples with a surface oxide film composed of solely chromium oxide with a thickness of approximately 700 nm were exposed to low-pressure hydrogen plasma at elevated temperatures to determine the suitable parameters for reduction of the oxide film. The hydrogen pressure during treatment was set to 60 Pa. Plasma was created by a surfaguide microwave discharge in a quartz glass tube to allow for a high dissociation fraction of hydrogen molecules. Auger electron depth profiling (AES) was used to determine the decay of the oxygen in the surface film and X-ray diffraction (XRD) to measure structural modifications. During hydrogen plasma treatment, the oxidized Inconel samples were heated to elevated temperatures. The reduction of the oxide film started at temperatures of approximately 1300 K (considering the emissivity of 0.85) and the oxide was reduced in about 10 s of treatment as revealed by AES. The XRD showed sharper substrate peaks after the reduction. Samples treated in hydrogen atmosphere under the same conditions have not been reduced up to approximately 1500 K indicating usefulness of plasma treatment.

  13. Hydrophobic regeneration of polypropylene with VUV and plasma treatments

    OpenAIRE

    Wanke,Cesar H.; Barbosa,Luiz G.; Hübner,Júlia V. M.; Flavio Horowitz; Raquel S. Mauler; Oliveira,Ricardo V. B.

    2012-01-01

    Tratamentos superficiais por plasma e ultravioleta de vácuo (VUV) foram utilizados para introduzir grupos funcionais contendo oxigênio em amostras de polipropileno, com objetivo de modificar sua molhabilidade. Análises por ATR-FTIR, AFM e ângulo de contato (AC) foram utilizadas para analisar as mudanças químicas e físicas na superfície do PP em função do tempo. Os resultados mostraram que as mudanças na molhabilidade das amostras tratadas por VUV ocorreram principalmente devido à alteração qu...

  14. Influence and Analysis of Concentrate Degree of Plasma Arc for Heat Process of Hardening Treatment

    Institute of Scientific and Technical Information of China (English)

    WANG Shuo-gui; YAN Hong-ri

    2004-01-01

    According to the practicable model of the plasma arc surface quench, the influence law of the heat process、cooling course、 temperature field about surface quench treatment by plasma arc due to the concentrate degree of plasma arc heat source are discussed in this paper. It shows that the concentrate degree of plasma arc heat source can change the width of the hardening zone and can not change the maximum harden depth. With the increase of the concentrate degree, the area of the heat influence zone is decreased and its shape is narrowed after the heat source. Relative to cooling rate, the influence of the heat source concentrate degree for heat absorption is bigger. The correctness of the practical model are proved with experimental results for quench hardening of 45# steel by plasma arc.

  15. Influence and Analysis of Concentrate Degree of Plasma Arc for Heat Process of Hardening Treatment

    Institute of Scientific and Technical Information of China (English)

    WANGShuo-gui; YANHong-ri

    2004-01-01

    According to the practicable model of the plasma arc surtace quench, the influence law ot me heat process, cooling course, temperature field about surface quench treatment by plasma arc due to the concentrate degree of plasma arc heat source are discussed in this paper. It shows that the concentrate degree of plasma arc heat source can change the width of the hardening zone and can not change the maximum harden depth. With the increase of the concentrate degree, the area of the heat influence zone is decreased and its shape is narrowed after the heat source. Relative to cooling rate, the influence of the heat source concentrate degree for heat absorption is bigger. The correctness of the practical model are proved with experimental results for quench hardening of 45# steel by plasma arc.

  16. Optical Emission Spectroscopy of an Atmospheric Pressure Plasma Jet During Tooth Bleaching Gel Treatment.

    Science.gov (United States)

    Šantak, Vedran; Zaplotnik, Rok; Tarle, Zrinka; Milošević, Slobodan

    2015-11-01

    Optical emission spectroscopy was performed during atmospheric pressure plasma needle helium jet treatment of various tooth-bleaching gels. When the gel sample was inserted under the plasma plume, the intensity of all the spectral features increased approximately two times near the plasma needle tip and up to two orders of magnitude near the sample surface. The color change of the hydroxylapatite pastille treated with bleaching gels in conjunction with the atmospheric pressure plasma jet was found to be in correlation with the intensity of OH emission band (309 nm). Using argon as an additive to helium flow (2 L/min), a linear increase (up to four times) of OH intensity and, consequently, whitening (up to 10%) of the pastilles was achieved. An atmospheric pressure plasma jet activates bleaching gel, accelerates OH production, and accelerates tooth bleaching (up to six times faster).

  17. Mesotherapy and platelet-rich plasma for the treatment of hair loss

    Directory of Open Access Journals (Sweden)

    Gonca Gökdemir

    2014-06-01

    Full Text Available Hair loss often significant impact on quality of life, including loss of self-confidence and self-esteem. However, treatment of hair loss is frustrating for both patients and doctors. Mesotherapy and platelet-rich plasma have recently become advertised method for the treatment of different types of alopecia. The efficacy of these methods in hair loss is controversial in view of lack of documented evidence. It was reviewed the data about the efficacy, safety and treatment protocols of mesotherapy and platelet-rich plasma in patients with hair loss.

  18. Suppression of surface crystallization on borosilicate glass using RF plasma treatment

    Science.gov (United States)

    Yoo, Sunghyun; Ji, Chang-Hyeon; Jin, Joo-Young; Kim, Yong-Kweon

    2014-10-01

    Surface crystallization on a commercial grade borosilicate glass wafer, Borofloat® 33, is effectively prevented against 3 h of thermal reflow process at 850 °C. Surface plasma treatment with three different reactive gases, CF4, SF6, and Cl2, has been performed prior to the annealing. The effect of plasma treatment on surface ion concentration and nucleation of cristobalite were examined through optical microscope and x-ray photoemission spectroscopy. The dominant cause that suppresses crystallization was verified to be the increase of surface ion concentration of alumina during the plasma treatment. Both CF4 and SF6 treatment of no less than 30 s showed significant efficacy in suppressing crystallization by a factor of more than 112. Average surface roughness and the optical transparency were also enhanced by a factor of 15 and 3, respectively, compared to untreated sample.

  19. Effect of hydrocarbons on plasma treatment of NOx

    Energy Technology Data Exchange (ETDEWEB)

    Penetrante, B.M.; Pitz, W.J.; Hsaio, M.C.; Merritt, B.T.; Vogtlin, G.E. [Lawrence Livermore National Lab., CA (United States)

    1997-12-31

    Lean burn gasoline engine exhausts contain a significant amount of hydrocarbons in the form of propene. Diesel engine exhausts contain little gaseous hydrocarbon; however, they contain a significant amount of liquid-phase hydrocarbons (known as the volatile organic fraction) in the particulates. The objective of this paper is to examine the fate of NO{sub x} when an exhaust gas mixture that contains hydrocarbons is subjected to a plasma. The authors will show that the hydrocarbons promote the oxidation of NO to NO{sub 2}, but not the reduction of NO to N{sub 2}. The oxidation of NO to NO{sub 2} is strongly coupled with the hydrocarbon oxidation chemistry. This result suggests that gas-phase reactions in the plasma alone cannot lead to the chemical reduction of NO{sub x}. Any reduction of NO{sub x} to N{sub 2} can only be accomplished through heterogeneous reactions of NO{sub 2} with surfaces or particulates.

  20. Cold atmospheric plasma treatment selectively targets head and neck squamous cell carcinoma cells.

    Science.gov (United States)

    Guerrero-Preston, Rafael; Ogawa, Takenori; Uemura, Mamoru; Shumulinsky, Gary; Valle, Blanca L; Pirini, Francesca; Ravi, Rajani; Sidransky, David; Keidar, Michael; Trink, Barry

    2014-10-01

    The treatment of locoregional recurrence (LRR) of head and neck squamous cell carcinoma (HNSCC) often requires a combination of surgery, radiation therapy and/or chemotherapy. Survival outcomes are poor and the treatment outcomes are morbid. Cold atmospheric plasma (CAP) is an ionized gas produced at room temperature under laboratory conditions. We have previously demonstrated that treatment with a CAP jet device selectively targets cancer cells using in vitro melanoma and in vivo bladder cancer models. In the present study, we wished to examine CAP selectivity in HNSCC in vitro models, and to explore its potential for use as a minimally invasive surgical approach that allows for specific cancer cell or tumor tissue ablation without affecting the surrounding healthy cells and tissues. Four HNSCC cell lines (JHU-022, JHU-028, JHU-029, SCC25) and 2 normal oral cavity epithelial cell lines (OKF6 and NOKsi) were subjected to cold plasma treatment for durations of 10, 30 and 45 sec, and a helium flow of 20 l/min-1 for 10 sec was used as a positive treatment control. We showed that cold plasma selectively diminished HNSCC cell viability in a dose-response manner, as evidenced by MTT assays; the viability of the OKF6 cells was not affected by the cold plasma. The results of colony formation assays also revealed a cell-specific response to cold plasma application. Western blot analysis did not provide evidence that the cleavage of PARP occurred following cold plasma treatment. In conclusion, our results suggest that cold plasma application selectively impairs HNSCC cell lines through non-apoptotic mechanisms, while having a minimal effect on normal oral cavity epithelial cell lines.

  1. Recovery of Cu and valuable metals from E-waste using thermal plasma treatment

    Science.gov (United States)

    Mitrasinovic, Aleksandar; Pershin, Larry; Wen, John Z.; Mostaghimi, Javad

    2011-08-01

    A thermal plasma treatment was employed for economical recovery of valuable metals from e-waste. Cu-clad plates that simulated circuit boards were fed at the bottom of the reactor and treated with a plasma jet at temperatures between 385 and 840°C. Organic components of the Cu-clad plates were decomposed and contributed to the increased temperature of the offgas. Due to the low temperatures at the base of the reactor, the analyzed samples did not show losses characteristic for the plasma processes such as evaporation or metal oxidation. After plasma treatment, Cu foils were separated from the fiber glass and other solid residues allowing a complete recovery. Solid residues of the plates at the bottom of the reactor were crunched into small particles, allowing easy recycling or use as construction material.

  2. Enhancement of food safety – antimicrobial effectiveness of cold plasma treatments

    Directory of Open Access Journals (Sweden)

    Irina SMEU

    2014-08-01

    Full Text Available Cold plasma treatment proved to be a flexible, efficient, chemical-free antimicrobial process and it can represent an easy to use sanitizing method for the food industry that does not require special temperature, humidity or pressure conditions. This paper reviews the classification of plasma and the main cold plasma generating devices used in the recent years to enhance food safety. A research of available literature was also conducted to identify the antimicrobial mode of action of cold plasma treatment as well as advantages and key limitations of this technique when applied to different food products such as fruits, vegetables, meat and milk. The study revealed that further development of this method will have to be carried out, allowing better understanding of the complex interactions during applications and its restrictions, as well as practice outlook.

  3. Modification of optical and electrical properties of chemical bath deposited CdS using plasma treatments

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, G. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon, C.P 66450 (Mexico); Krishnan, B. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon, C.P 66450 (Mexico); CIIDIT, Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico); Avellaneda, D.; Castillo, G. Alan; Das Roy, T.K. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon, C.P 66450 (Mexico); Shaji, S., E-mail: sshajis@yahoo.com [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon, C.P 66450 (Mexico); CIIDIT, Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico)

    2011-08-31

    Cadmium sulphide (CdS) is a well known n-type semiconductor that is widely used in solar cells. Here we report preparation and characterization of chemical bath deposited CdS thin films and modification of their optical and electrical properties using plasma treatments. CdS thin films were prepared from a chemical bath containing Cadmium chloride, Triethanolamine and Thiourea under various deposition conditions. Good quality thin films were obtained during deposition times of 5, 10 and 15 min. CdS thin films prepared for 10 min. were treated using a glow discharge plasma having nitrogen and argon carrier gases. The changes in morphology, optical and electrical properties of these plasma treated CdS thin films were analyzed in detail. The results obtained show that plasma treatment is an effective technique in modification of the optical and electrical properties of chemical bath deposited CdS thin films.

  4. Microstructure evolution and tribological properties of acrylonitrile-butadiene rubber surface modified by atmospheric plasma treatment

    Science.gov (United States)

    Shen, Ming-xue; Zhang, Zhao-xiang; Peng, Xu-dong; Lin, Xiu-zhou

    2017-09-01

    For the purpose of prolonging the service life for rubber sealing elements, the frictional behavior of acrylonitrile-butadiene rubber (NBR) surface by dielectric barrier discharge plasma treatments was investigated in this paper. Surface microstructure and chemical composition were measured by atomic force microscopy, field-emission scanning electron microscopy, and X-ray photoelectron spectroscopy, respectively. Water contact angles of the modified rubber surface were also measured to evaluate the correlation between surface wettability and tribological properties. The results show that plasma treatments can improve the properties of the NBR against friction and wear effectively, the surface microstructure and roughness of plasma-modified NBR surface had an important influence on the surface tribological behavior, and the wear depth first decreased and then increased along with the change of plasma treatment time. It was found that the wettability of the modified surface was gradually improved, which was mainly due to the change of the chemical composition after the treatment. This study suggests that the plasma treatment could effectively improve the tribological properties of the NBR surface, and also provides information for developing wear-resistant NBR for industrial applications.

  5. Plasma-water systems studied with optical diagnostics including sum-frequency generation spectroscopy

    Science.gov (United States)

    Ito, Tsuyohito

    2016-09-01

    Recently, various applications of plasma-water systems have been reported, such as materials synthesis, agricultural applications, and medical treatments. As one of basic studies of such systems, we are investigating water surface structure influenced by a plasma via vibrational sum-frequency generation spectroscopy. Vibrational sum-frequency generation spectroscopy is known to be an interfacially active diagnostic technique, as such process occurs in noncentrosymmetric medium. Visible and wavenumber-tunable infrared beams are simultaneously irradiated to the interface. The interfacial water has ice-like ( 3200 cm-1), liquid-like ( 3400 cm-1), and free OH (3700 cm-1) structures (assignment of the ice-like structure still remains contentious), and the intensity of the signal becomes stronger when the tunable infrared beam resonates with a vibration of the structures. The results indicate that with generating air dielectric barrier discharges for supplying reactive species to the water surface, all investigated signals originating from the above-mentioned three structures decrease. Furthermore, the signal strengths are recovered after terminating the plasma generation. We currently believe that the surface density of the reactive species should be high when they are found at the water surface. Details on the experimental results of the sum-frequency generation spectroscopy, as well as other spectroscopic results of plasma-water systems, will be presented at the conference.

  6. Effect of Cold Plasma Treatment on the Mechanical Properties of RTM Composites

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Cold plasma technology was used to treat the surface of carbon fibers braided by PET in this paper and SEM wasused to analyze the fracture microstructure of composite interlaminar shear stress (ILSS). The result shows that thesurface polarity of carbon fibers was modified by cold plasma treatment, which increases the impregnation of PETbraided carbon fibers during the process of resin flowing, improves the interfacial properties of RTM composites, andtherefore enhances the mechanical properties of the KTM composites.

  7. Water/O2-plasma-assisted treatment of PCL membranes for biosignal immobilization.

    Science.gov (United States)

    Saşmazel, Hilal Türkoğlu; Manolache, Sorin; Gümüşderelioğlu, Menemşe

    2009-01-01

    The main purpose of this study was to obtain COOH functionalities on the surface of poly-epsilon-caprolactone (PCL) membranes using low-pressure water/O(2)-plasma-assisted treatment. PCL membranes were prepared using the solvent-casting technique. Then, low-pressure water/O(2) plasma treatments were performed in a cylindrical, capacitively coupled RF-plasma-reactor in three steps: H(2)O/O(2)-plasma treatment; in situ (oxalyl chloride vapors) gas/solid reaction to convert -OH functionalities into -COCl groups; and hydrolysis for final -COOH functionalities. Optimization of plasma modification processes was done using the DoE software program. COOH and OH functionalities on modified surfaces were detected quantitatively using the fluorescent labeling technique and an UVX 300G sensor. Chemical structural information of untreated, plasma treated and oxalyl chloride functionalized PCL membranes were acquired using pyrolysis GC/MS and ESCA analysis. High-resolution AFM images revealed that nanopatterns were more affected than micropatterns by plasma treatments. AFM images recorded with amino-functionalized tips presented increased size of the features on the surface that suggests higher density of the carboxyls on the nanotopographical elements. Low-pressure water/O(2)-plasma-treated and oxalyl chloride functionalized samples were biologically activated with insulin and/or heparin biosignal molecules using a PEO (polyoxyethylene bis amine) spacer. The success of the immobilization process was checked qualitatively by ESCA analysis. In addition, fluorescent labeling techniques were used for the quantitative determination of immobilized biomolecules. Cell-culture experiments indicated that biomolecule immobilization onto PCL scaffolds was effective on L929 cell adhesion and proliferation, especially in the presence of heparin.

  8. Impact of surface structure and feed gas composition on Bacillus subtilis endospore inactivation during direct plasma treatment.

    Science.gov (United States)

    Hertwig, Christian; Steins, Veronika; Reineke, Kai; Rademacher, Antje; Klocke, Michael; Rauh, Cornelia; Schlüter, Oliver

    2015-01-01

    This study investigated the inactivation efficiency of cold atmospheric pressure plasma treatment on Bacillus subtilis endospores dependent on the used feed gas composition and on the surface, the endospores were attached on. Glass petri-dishes, glass beads, and peppercorns were inoculated with the same endospore density and treated with a radio frequency plasma jet. Generated reactive species were detected using optical emission spectroscopy. A quantitative polymerase chain reaction (qPCR) based ratio detection system was established to monitor the DNA damage during the plasma treatment. Argon + 0.135% vol. oxygen + 0.2% vol. nitrogen as feed gas emitted the highest amounts of UV-C photons and considerable amount of reactive oxygen and nitrogen species. Plasma generated with argon + 0.135% vol. oxygen was characterized by the highest emission of reactive oxygen species (ROS), whereas the UV-C emission was negligible. The use of pure argon showed a negligible emission of UV photons and atomic oxygen, however, the emission of vacuum (V)UV photons was assumed. Similar maximum inactivation results were achieved for the three feed gas compositions. The surface structure had a significant impact on the inactivation efficiency of the plasma treatment. The maximum inactivation achieved was between 2.4 and 2.8 log10 on glass petri-dishes and 3.9 to 4.6 log10 on glass beads. The treatment of peppercorns resulted in an inactivation lower than 1.0 log10. qPCR results showed a significant DNA damage for all gas compositions. Pure argon showed the highest results for the DNA damage ratio values, followed by argon + 0.135% vol. oxygen + 0.2% vol. nitrogen. In case of argon + 0.135% vol. oxygen the inactivation seems to be dominated by the action of ROS. These findings indicate the significant role of VUV and UV photons in the inactivation process of B. subtilis endospores.

  9. Impact of surface structure and feed gas composition on Bacillus subtilis endospore inactivation during direct plasma treatment

    Directory of Open Access Journals (Sweden)

    Christian eHertwig

    2015-08-01

    Full Text Available This study investigated the inactivation efficiency of cold atmospheric pressure plasma treatment on Bacillus subtilis endospores dependent on the used feed gas composition and on the surface, the endospores were attached on. Glass petri-dishes, glass beads and peppercorns were inoculated with the same endospore density and treated with a radio frequency plasma jet. Generated reactive species were detected using optical emission spectroscopy. A quantitative polymerase chain reaction (qPCR based ratio detection system was established to monitor the DNA damage during the plasma treatment.Argon + 0.135 % vol. oxygen + 0.2 % vol. nitrogen as feed gas emitted the highest amounts of UV-C photons and considerable amount of reactive oxygen and nitrogen species. Plasma generated with argon + 0.135 % vol. oxygen was characterized by the highest emission of reactive oxygen species, whereas the UV-C emission was negligible. The use of pure argon showed a negligible emission of UV photons and atomic oxygen, however the emission of vacuum (VUV photons was assumed. Similar maximum inactivation results were achieved for the three feed gas compositions.The surface structure had a significant impact on the inactivation efficiency of the plasma treatment. The maximum inactivation achieved was between 2.4 and 2.8 log10 on glass petri-dishes and 3.9 to 4.6 log10 on glass beads. The treatment of peppercorns resulted in an inactivation lower than 1.0 log10. qPCR results showed a significant DNA damage for all gas compositions. Pure argon showed the highest results for the DNA damage ratio values, followed by argon + 0.135 % vol. oxygen + 0.2 % vol. nitrogen. In case of argon + 0.135 % vol. oxygen the inactivation seems to be dominated by the action of reactive oxygen species. These findings indicate the significant role of VUV and UV photons in the inactivation process of Bacillus subtilis endospores.

  10. Characterization of an atmospheric pressure plasma jet and its applications for disinfection and cancer treatment.

    Science.gov (United States)

    Thiyagarajan, Magesh; Sarani, Abdollah; Gonzales, Xavier F

    2013-01-01

    In this work an atmospheric pressure non-thermal resistive barrier (RB) plasma jet was constructed, characterized and was applied for biomedical applications. The RB plasma source can operate in both DC (battery) as well as in standard 60/50 Hz low frequency AC excitation, and it functions effectively in both direct and indirect plasma exposure configurations. The characteristics of the RB plasma jet such as electrical properties, plasma gas temperature and nitric oxides concentration were determined using voltage-current characterization, optical emission spectroscopy and gas analyzer diagnostic techniques. Plasma discharge power of 26.33 W was calculated from voltage-current characterization. An optical emission spectroscopy was applied and the gas temperature which is equivalent to the nitrogen rotational (Trot) temperatures was measured. The concentrations of the reactive oxygen species at different spatial distances from the tip of the plasma jet were measured and the ppm concentration of NO is at the preferred level for a wide range of standard biomedical treatment applications. The ppm values of nitric oxides after the cooling unit are observed to be of the same order of magnitude as compared to plasma jet. The portable RB plasma source was tested to be very effective for decontamination and disinfection of a wide range of foodborne and opportunistic nosocomial pathogens such as Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa and Bacillus cereus and the preliminary results are presented. The effects of indirect exposure of the portable RBP source on monocytic leukemia cancer cells (THP-1) were also tested and the results demonstrate that a preference for apoptosis in plasma treated THP-1 cells under particular plasma parameters and dosage levels.

  11. Treatment of RW by Plasma technology; Tratamiento de RBMA mediante tecnologia Plasma

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Perales, J. J.; Diaz Prada, J. I.; Alvarez Mir, F.

    2003-07-01

    Vitrification of low and intermediate level wastes based on plasma technology allows the destruction of organic components by pyrolisys or gasification and the incorporation of the inorganic components into a melted glass in the bottom of the reactor. The new product are obtained with a significant volume reduction compared with the one of original wastes, assuring emissions below authorized limits; Final volume reduction of wastes involves a radiological exposure reduction and, consequently involves an radiological protection improvement. As a result of the several test developed at the different phases of the project, it has been able the optimization of the equipment and to reduce emissions from a chemical or radiological point of view, always, fulfilling the current legislation. This process is an alternative method to reduce the volume of wastes to be disposed, improving the waste management and reducing the operator radioactive exposures. This article describes a plasma torch plant project, it's different stages, innovation features and advantages of this technology to treat radioactive wastes. (Author)

  12. A Study on the Effect of Plasma Treatment for Waste Wood Biocomposites

    Directory of Open Access Journals (Sweden)

    MiMi Kim

    2013-01-01

    Full Text Available The surface modification of wood powder by atmospheric pressure plasma treatment was investigated. The composites were manufactured using wood powder and polypropylene (wood powder: polypropylene = 55 wt% : 45 wt%. Atmospheric pressure plasma treatment was applied under the condition of 3 KV, 17±1 KHz, 2 g/min. Helium was used as the carrier gas and hexamethyl-disiloxane (HMDSO as the monomer to modify the surface property of the waste wood biocomposites by plasma polymerization. The tensile strengths of untreated waste wood powder (W3 and single species wood powder (S3 were about 18.5 MPa and 21.5 MPa while those of plasma treated waste wood powder (PW3 and plasma treated single species wood powder (PS3 were about 21.2 MPa and 23.4 MPa, respectively. Tensile strengths of W3 and S3 were improved by 14.6% and 8.8%, respectively. From the analyses of mechanical properties and morphology, we conclude that the interfacial bonding of polypropylene and wood powder can be improved by atmospheric pressure plasma treatment.

  13. Surface treatment of a titanium implant using low temperature atmospheric pressure plasmas

    Science.gov (United States)

    Lee, Hyun-Young; Tang, Tianyu; Ok, Jung-Woo; Kim, Dong-Hyun; Lee, Ho-Jun; Lee, Hae June

    2015-09-01

    During the last two decades, atmospheric pressure plasmas(APP) are widely used in diverse fields of biomedical applications, reduction of pollutants, and surface treatment of materials. Applications of APP to titanium surface of dental implants is steadily increasing as it renders surfaces wettability and modifies the oxide layer of titanium that hinders the interaction with cells and proteins. In this study, we have treated the titanium surfaces of screw-shaped implant samples using a plasma jet which is composed of a ceramic coaxial tube of dielectrics, a stainless steel inner electrode, and a coper tube outer electrode. The plasma ignition occurred with Ar gas flow between two coaxial metal electrodes and a sinusoidal bias voltage of 3 kV with a frequency of 20 kHz. Titanium materials used in this study are screw-shaped implants of which diameter and length are 5 mm and 13 mm, respectively. Samples were mounted at a distance of 5 mm below the plasma source, and the plasma treatment time was set to 3 min. The wettability of titanium surface was measured by the moving speed of water on its surface, which is enhanced by plasma treatment. The surface roughness was also measured by atomic force microscopy. The optimal condition for wettability change is discussed.

  14. Development of superhydrophobic surface on glass substrate by multi-step atmospheric pressure plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Han, Duksun [Department of Applied Plasma Engineering, Chonbuk National University, 567 Baekje-daero, Deokjin-gu, Jeonju, Jeollabuk-do 561-756 (Korea, Republic of); Moon, Se Youn, E-mail: symoon@jbnu.ac.kr [Department of Applied Plasma Engineering, Chonbuk National University, 567 Baekje-daero, Deokjin-gu, Jeonju, Jeollabuk-do 561-756 (Korea, Republic of); Department of Quantum system Engineering, Chonbuk National University, 567 Baekje-daero, Deokjin-gu, Jeonju, Jeollabuk-do 561-756 (Korea, Republic of)

    2015-07-31

    Superhydrophobic surface was prepared on a glass by helium based CH{sub 4} and C{sub 4}F{sub 8} atmospheric pressure plasmas, and its water wettability was investigated by a water droplet contact angle method. The water droplet spread over on the untreated glasses that showed the initial hydrophilic property of the glass surface. Then, the static contact angles became about 85° and 98° after a single step CH{sub 4} plasma treatment and a single step C{sub 4}F{sub 8} plasma treatment, respectively. The contact angle was remarkably increased to 152°, indicating a superhydrophobic property, after a sequential multi-step CH{sub 4} and C{sub 4}F{sub 8} plasma treatment. From the X-ray photoelectron spectroscopy and the field emission scanning electron microscope measurements, it was found that the physical morphologies and the chemical compositions were depending on the substrate materials, which were important factors for the superhydrophobicity. - Highlights: • Development of rapid and simple method for superhydrophobic surface • Effects of atmospheric pressure plasma for superhydrophobic surface preparation • Observation of chemical and physical surface modification by atmospheric pressure plasma • Effects of substrate properties for plasma–surface interaction.

  15. Plasma-cell cheilitis: successful treatment with intralesional injections of corticosteroids.

    Science.gov (United States)

    Tseng, J T-P; Cheng, C-J; Lee, W-R; Wang, K-H

    2009-03-01

    Plasma-cell cheilitis is a rare inflammatory disorder of the lip characterized histologically by a band-like infiltrate of plasma cells in the upper dermis. It is considered an oral counterpart of plasma-cell balanitis. Clinically, it presents as a circumscribed, flat to slightly raised, eroded area of the lip. The cause of plasma-cell cheilitis is unknown, and the treatment is often disappointing. We describe a 55-year-old woman who had a long-lasting painful, swollen, and eroded area on her lips, which responded poorly to various topical treatments. Biopsy showed a band-like infiltrate composed mainly of mature plasma cells in the dermis. A diagnosis of plasma-cell cheilitis was made after excluding contact dermatitis, lichen planus, bacterial, fungal and spirochaete infections, and an extramedullary plasmacytoma. Dramatic improvements were observed after intralesional injections of corticosteroids. The lesion cleared up after two treatments, and there has been no recurrence in 1 year of follow-up.

  16. Data management software concept for WEST plasma measurement system

    Science.gov (United States)

    Zienkiewicz, P.; Kasprowicz, G.; Byszuk, A.; Wojeński, A.; Kolasinski, P.; Cieszewski, R.; Czarski, T.; Chernyshova, M.; Pozniak, K.; Zabolotny, W.; Juszczyk, B.; Mazon, D.; Malard, P.

    2014-11-01

    This paper describes the concept of data management software for the multichannel readout system for the GEM detector used in WEST Plasma experiment. The proposed system consists of three separate communication channels: fast data channel, diagnostics channel, slow data channel. Fast data channel is provided by the FPGA with integrated ARM cores providing direct readout data from Analog Front Ends through 10GbE with short, guaranteed intervals. Slow data channel is provided by multiple, fast CPUs after data processing with detailed readout data with use of GNU/Linux OS and appropriate software. Diagnostic channel provides detailed feedback for control purposes.

  17. Plasma treatment of INEL soil contaminated with heavy metals

    Energy Technology Data Exchange (ETDEWEB)

    Detering, B.A.; Batdorf, J.A.

    1992-01-01

    INEL soil spiked with inorganic salts of chromium, lead, mercury, silver, and zinc was melted in a 150 kW plasma furnace to produce a glassy slag product. This glassy slag is an environmentally safe waste form. In order to reduce the melting temperature of the soil, sodium carbonate was added to half of the test batches. Random sample from each batch of glassy slag product were analyzed by an independent laboratory for total metals concentration and leachability of metals via the Environmental Protection Agency (EPA) toxicity characterization leaching procedure (RCLP) tests. These tests showed the residual metals were very tightly bound to the slag matrix and were within EPA TCLP limits under these test conditions. Additionally, scanning electron microscopy (SEM) and emissions dispersive spectroscopy (EDS) analysis of the vitrified soil also confirmed that the added metals present in the vitrified soil were totally contained in the crystalline phase as distinct oxide crystallites.

  18. Argon plasma coagulation for treatment of hemorrhagic radiation gastroduodenitis

    Energy Technology Data Exchange (ETDEWEB)

    Maekawa, Shu-Ji; Aoyama, Nobuo; Shirasaka, Daisuke; Inoue, Takashi; Kuroda, Kohei; Ebara, Shigeyuki; Tamura, Takao; Miyamoto, Masaki; Kasuga, Masato [Kobe Univ. (Japan). Graduate School of Medicine

    2002-01-01

    A 79-year-old man who had received radiotherapy for portal vein thrombosis due to hepatocellular carcinoma (HCC) 5 months earlier, showed progressive anemia and melena. Endoscopy on admission revealed diffuse bleeding from multiple telangiectasias on the anterior wall of the antrum and bulbus. We treated this patient with a new non-contact hemostatic method: the argon plasma coagulator (APC). The melena stopped after the first session and the hemoglobin level remained stable for 7 months. No delayed complications have been observed. Gastrointestinal bleeding from chronic radiation gastroduodenitis is rarely reported compared with radiation proctitis. This case demonstrates that APC is effective for hemostasis of diffuse bleeding from radiation gastroduodenitis, just as for radiation protitis. (author)

  19. Effect of low temperature plasma treatment on dimensional stability of wool fabrics. Yomo orimono no sunpo fuanteisei ni oyobosu teion plasma shori no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Goto, T.; Wakita, T. (Kyoto Institute of Technology, Kyoto (Japan). Faculty of Engineering and Design); Hosotani, T. (Unitika Research Laboratories Inc., Osaka (Japan))

    1991-07-10

    This report describes the effect of low temperature plasma treatment, which has been developed for fabric processing, on wool fabrics. In the experiment, wool fabrics were treated by low temperature plasma using O{sub 2}, Ar, CH{sub 4}, CHF{sub 3}, and CF{sub 4}. Low temperature plasma treatment did not influence moisture regain of wool fabrics, but influenced hygral expansion. There was no difference in the area of low humidity, however, dimensional change was restricted by half in the area of high humidity. Low temperature plasma treatment also improved felt shrinkage caused by home laundering. Moreover, it was found that friction coefficient of wool fabrics increased remarkably after low temperature plasma treatment. Therefore, the subsequent reactive silicone elastmer softening agent was used for finishing process after low temperature plasma treatment. As a result, wool fabrics hardened by low temperature plasma treatment regained their soft condition and washing resistant shrinkage percentage was also improved. Thus this treatment was proved to be used practically. 15 refs., 6 figs., 5 tabs.

  20. Influence of He/O 2 atmospheric pressure plasma jet treatment on subsequent wet desizing of polyacrylate on PET fabrics

    Science.gov (United States)

    Li, Xuming; Lin, Jun; Qiu, Yiping

    2012-01-01

    The influence of He/O2 atmospheric pressure plasma jet (APPJ) treatment on subsequent wet desizing of polyacrylate on PET fabrics was studied in the present paper. Weight loss results indicated that the weight loss increased with an increase of plasma treatment time. Atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed an increased surface roughness after the plasma treatment. SEM also showed that the fiber surfaces were as clean as unsized fibers after 35 s treatment followed by NaHCO3 desizing. X-ray photoelectron spectroscopy (XPS) analysis indicated that oxygen-based functional groups increased for the plasma treated polyacrylate sized fabrics. The percent desizing ratio (PDR) results showed that more than 99% PDR was achieved after 65 s plasma treatment followed by a 5 min NaHCO3 desizing. Compared to conventional wet desizing, indicating that plasma treatment could significantly reduce desizing time.

  1. Changes in plasma cytokines after treatment of ascaris lumbricoides infection in individuals with HIV-1 infection.

    Science.gov (United States)

    Blish, Catherine A; Sangaré, Laura; Herrin, Bradley R; Richardson, Barbra A; John-Stewart, Grace; Walson, Judd L

    2010-06-15

    Albendazole treatment of individuals with human immunodeficiency virus type 1 (HIV-1) and Ascaris lumbricoides co-infection has led to significantly improved CD4(+) cell counts and a trend for lower plasma HIV-1 RNA levels in a previous randomized placebo-controlled trial. To define mechanisms by which deworming contributed to changes in markers of HIV-1 disease progression, plasma cytokine levels were evaluated. Albendazole treatment, compared with placebo, was associated with significantly decreased plasma interleukin (IL) 10 levels (P = .01)ot associated with significant changes in levels of IL-1beta, IL-2, IL-4, IL-5, IL-6, IL-7, IL-8, IL-12p70, IL-13, interferon gamma, tumor necrosis factor alpha, or thymic stromal lymphopoietin. Treatment of A. lumbricoides co-infection may delay HIV-1 disease progression by reducing helminth-induced, IL-10-mediated immunosuppression.

  2. UV excimer laser and low temperature plasma treatments of polyamide materials

    Science.gov (United States)

    Yip, Yiu Wan Joanne

    Polyamides have found widespread application in various industrial sectors, for example, they are used in apparel, home furnishings and similar uses. However, the requirements for high quality performance products are continually increasing and these promote a variety of surface treatments for polymer modification. UV excimer laser and low temperature plasma treatments are ideally suited for polyamide modification because they can change the physical and chemical properties of the material without affecting its bulk features. This project aimed to study the modification of polyamides by UV excimer laser irradiation and low temperature plasma treatment. The morphological changes in the resulting samples were analysed by scanning electron microscopy (SEM) and tapping mode atomic force microscopy (TM-AFM). The chemical modifications were studied by x-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and chemical force microscopy (CFM). Change in degree of crystallinity was examined by differential scanning calorimetry (DSC). After high-fluence laser irradiation, topographical results showed that ripples of micrometer size form on the fibre surface. By contrast, sub-micrometer size structures form on the polyamide surface when the applied laser energy is well below its ablation threshold. After high-fluence laser irradiation, chemical studies showed that the surface oxygen content of polyamide is reduced. A reverse result is obtained with low-fluence treatment. The DSC result showed no significant change in degree of crystallinity in either high-fluence or low-fluence treated samples. The same modifications in polyamide surfaces were studied after low temperature plasma treatment with oxygen, argon or tetrafluoromethane gas. The most significant result was that the surface oxygen content of polyamide increased after oxygen and argon plasma treatments. Both treatments induced many hydroxyl (-OH) and carboxylic acid (-COOH

  3. Platelets rich plasma versus minoxidil 5% in treatment of alopecia areata: A trichoscopic evaluation.

    Science.gov (United States)

    El Taieb, Moustafa A; Ibrahim, Hassan; Nada, Essam A; Seif Al-Din, Mai

    2017-01-01

    Alopecia areata is a common cause of nonscarring alopecia that occurs in a patchy, confluent, or diffuse pattern. Dermoscopy is a noninvasive technique for the clinical diagnosis of many skin diseases. Topical minoxidil solution 5% and platelet rich plasma are important modalities used in treatment of alopecia areata. We aimed to evaluate the efficacy of PRP versus topical minoxidil 5% in the treatment of AA by clinical evaluation and trichoscopic examination. Ninety patients were allocated into three groups; the first was treated with topical minoxidil 5% solution, the second with platelets rich plasma injections, and the third with placebo. Diagnosis and follow up were done by serial digital camera photography of lesions and dermoscopic scan before and every 1 month after treatment for 3 months. Patients treated with minoxidil 5% and platelets rich plasma both have significant hair growth than placebo (p minoxidil and control (p minoxidil 5% as evaluated by clinical and trichoscopic examination. © 2016 Wiley Periodicals, Inc.

  4. Impact of Plasma Surface Treatment on Bamboo Charcoal/silver Nanocomposite

    Science.gov (United States)

    Vignesh, K.; Vijayalakshmi, K. A.; Karthikeyan, N.

    2016-10-01

    Bamboo charcoal (BC) accompanied silver (Ag) nanocomposite is synthesized through sol-gel method. The produced BC/Ag nanocomposite was surface modified by air and oxygen plasma treatments. Silver ions (Ag+) will serve to improve the antibacterial activity as well as the surface area of BC. Plasma treatment has improved the surface functional groups, crystalline intensity and antibacterial activity of the prepared nanocomposite. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) studies show that Ag nanoparticles have good agreement with BC and the particle size has a mean diameter of 20-40nm. We observe the carboxyl functional groups in Fourier transform infrared spectroscopy (FTIR) after the oxygen plasma treatment. Moreover surface area and adsorption were analyzed by using the Brunauer, Emmett and Teller (BET) surface area (SBET) and UV-Vis spectroscopy.

  5. Small unilamellar liposomes as a membrane model for cell inactivation by cold atmospheric plasma treatment

    Science.gov (United States)

    Maheux, S.; Frache, G.; Thomann, J. S.; Clément, F.; Penny, C.; Belmonte, T.; Duday, D.

    2016-09-01

    Cold atmospheric plasma is thought to be a promising tool for numerous biomedical applications due to its ability to generate a large diversity of reactive species in a controlled way. In some cases, it can also generate pulsed electric fields at the zone of treatment, which can induce processes such as electroporation in cell membranes. However, the interaction of these reactive species and the pulse electric field with cells in a physiological medium is very complex, and we still need a better understanding in order to be useful for future applications. A way to reach this goal is to work with model cell membranes such as liposomes, with the simplest physiological liquid and in a controlled atmosphere in order to limit the number of parallel reactions and processes. In this paper, where this approach has been chosen, 1,2-Dioleoyl-sn-glycero-3-phosphocholine (DOPC) small unilamellar vesicles (SUV) have been synthesized in a phosphate buffered aqueous solution, and this solution has been treated by a nanosecond pulsed plasma jet under a pure nitrogen atmosphere. It is only the composition of the plasma gas that has been changed in order to generate different cocktails of reactive species. After the quantification of the main plasma reactive species in the phosphate buffered saline (PBS) solution, structural, surface charge state, and chemical modifications generated on the plasma treated liposomes, due to the interaction with the plasma reactive species, have been carefully characterized. These results allow us to further understand the effect of plasma reactive species on model cell membranes in physiological liquids. The permeation through the liposomal membrane and the reaction of plasma reactive species with molecules encapsulated inside the liposomes have also been evaluated. New processes of degradation are finally presented and discussed, which come from the specific conditions of plasma treatment under the pure nitrogen atmosphere.

  6. Charge neutral MoS2 field effect transistors through oxygen plasma treatment

    Science.gov (United States)

    Dhall, Rohan; Li, Zhen; Kosmowska, Ewa; Cronin, Stephen B.

    2016-11-01

    Lithographically fabricated MoS2 field effect transistors suffer from several critical imperfections, including low sub-threshold swings, large turn-on gate voltages (VT), and wide device-to-device variability. The large magnitude and variability of VT stems from unclean interfaces, trapped charges in the underlying substrate, and sulfur vacancies created during the mechanical exfoliation process. In this study, we demonstrate a simple and reliable oxygen plasma treatment, which mitigates the effects of unintentional doping created by surface defect sites, such as S vacancies, and surface contamination. This plasma treatment restores charge neutrality to the MoS2 and shifts the threshold turn-on voltage towards 0 V. Out of the 10 devices measured, all exhibit a shift of the FET turn-on voltage from an average of -18 V to -2 V. The oxygen plasma treatment passivates these defects, which reduces surface scattering, causing increased mobility and improved subthreshold swing. For as-prepared devices with low mobilities (˜0.01 cm2/V s), we observe up to a 190-fold increase in mobility after exposure to the oxygen plasma. Perhaps the most important aspect of this oxygen plasma treatment is that it reduces the device-to-device variability, which is a crucial factor in realizing any practical application of these devices.

  7. Influence of water/O₂ plasma treatment on cellular responses of PCL and PET surfaces.

    Science.gov (United States)

    Türkoğlu Şaşmazel, Hilal; Aday, Sezin; Manolache, Sorin; Gümüşderelioğlu, Menemşe

    2011-01-01

    In this study, low pressure water/O₂ plasma treatment was performed in order to obtain COOH functionalities on the surface of poly-ε-caprolactone (PCL) membranes as well as non-woven polyester fabric (NWPF) discs. The plasma treatments were performed in a cylindrical, capacitively coupled RF-plasma-reactor and then following steps were performed: in situ (oxalyl chloride vapors) gas/solid reaction to convert -OH functionalities into -COCl groups; and hydrolysis under open laboratory conditions using air moisture for final-COOH functionalities. COOH and OH functionalities on modified surfaces were detected quantitatively by using fluorescent labeling technique and an UVX 300G sensor. Electron spectroscopy for chemical analysis (ESCA) was used to evaluate the relative surface atomic compositions and the carbon and oxygen linkages located in non-equivalent atomic positions of untreated and modified surfaces. Atomic force microscope (AFM) analysis showed that nanoscale features of the PCL surfaces are dramatically changed during the surface treatments. Scanning electron microscopy (SEM) results indicated the changes in the relatively smooth appearance of the untreated NWPF discs after the plasma treatment. Periodontal ligament (PDL) fibroblasts were used in cell culture studies. Cell culture results showed that plasma treated PCL membranes and NWPF discs were favorable for the PDL cell spreading, growth and viability due to the presence of functional groups and/or nanotopographies on their surfaces.

  8. Analysis of structural transformation in wool fiber resulting from oxygen plasma treatment using vibrational spectroscopy

    Science.gov (United States)

    Barani, Hossein; Haji, Aminoddin

    2015-01-01

    The aim of this study was to investigate the influence of oxygen plasma procedure at different time treatments on wool fiber using the micro-Raman spectroscopy as a non-destructive vibrational spectroscopic technique and Fourier transform infrared spectroscopy. The amide I and III regions, Csbnd C skeletal vibration region, and Ssbnd S and Csbnd S bonds vibration regions were analyzed with the Raman microscope. The Fourier transform infrared spectroscope analysis was employed to find out the effect of oxygen plasma treatment on the cysteic acid residues content of the wool fiber sample. The results indicated that the α-helix structure was the highest component content of wool fiber. Moreover, the protein secondary structure of wool fibers was transformed from α-helical arrangement to the β-pleated sheet configuration during the oxygen plasma treatment. Also, the disulphide bonds content in the treated wool fiber reduced because they were fractured and oxidized during oxygen plasma treatment. The oxygen plasma treated samples presented higher cysteic acid compared to the untreated wool samples due to produce more cleavage of disulfide linkages.

  9. Characterization of partially-inverted zinc ferrite with a bio-plasma treatment

    Science.gov (United States)

    Choi, Hyunkyung; Kim, Sam Jin; Kim, Chul Sung; Choi, Eun Ha

    2016-09-01

    ZnFe2O4 nanoparticles were prepared by using a high-temperature thermal-decomposition method and was investigated by using X-ray diffraction (XRD), high-resolution transmission electron spectroscopy (HR-TEM), MagneTherm, vibrating sample magnetometry (VSM) and Mössbauer spectroscopy. The XRD patterns revealed cubic spinel structures with space group Fd-3m. ZnFe2O4 nanoparticles were exposed to an argon plasma for 30 min. The self-heating temperature increased up to 37 °C during plasma treatment for 30 min. Magnetic measurements showed that the blocking temperature increased from 72 to 78 K during the plasma treatment. A high saturation magnetization was obtained in the partially-inverted spinel. In order to confirm the cation distribution and the phase transition, we performed Mössbauer measurement. The Mössbauer spectra of ZnFe2O4 before and after plasma treatment showed Fe3+ valence states at room temperature. Also, the Néel temperature of ZnFe2O4 was found to be larger after the plasma treatment.

  10. A Cascaded Discharge Plasma-Adsorbent Technique for Engine Exhaust Treatment

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A cascaded system of electrical discharges (non-thermal plasma) and adsorptionprocess was investigated for the removal of oxides of Nitrogen (NOx) and total hydrocarbons(THC) from an actual diesel engine exhaust. The non-thermal plasma and adsorption processeswere separately studied first and then the cascaded process was studied. In this study, differenttypes of adsorbents were used. The NOx removal efficiency was higher with plasma-associatedadsorption (cascaded) process compared to the individual processes and the removal efficiencywas found almost invariant in time. When associated by plasma, among the adsorbents studied,activated charcoal and MS-13X were more effective for NOx and THC removal respectively. Theexperiments were conducted at no load and at 50 % load conditions. The plasma reactor was keptat room temperature throughout the experiment, while the temperature of the adsorbent reactorwas varied. A relative comparison of adsorbents was discussed at the end.

  11. A Cascaded Discharge Plasma-Adsorbent Technique for Engine Exhaust Treatment

    Science.gov (United States)

    Rajanikanth, B. S.; Srinivasan, A. D.; Arya, Nandiny B.

    2003-06-01

    A cascaded system of electrical discharges (non-thermal plasma) and adsorption process was investigated for the removal of oxides of Nitrogen (NOx) and total hydrocarbons (THC) from an actual diesel engine exhaust. The non-thermal plasma and adsorption processes were separately studied first and then the cascaded process was studied. In this study, different types of adsorbents were used. The NOx removal efficiency was higher with plasma-associated adsorption (cascaded) process compared to the individual processes and the removal efficiency was found almost invariant in time. When associated by plasma, among the adsorbents studied, activated charcoal and MS-13X were more effective for NOx and THC removal respectively. The experiments were conducted at no load and at 50% load conditions. The plasma reactor was kept at room temperature throughout the experiment, while the temperature of the adsorbent reactor was varied. A relative comparison of adsorbents was discussed at the end.

  12. Effects of aging on the adhesive properties of poly(lactic acid) by atmospheric air plasma treatment

    OpenAIRE

    Jordá Vilaplana, Amparo; Sánchez Nacher, Lourdes; García Sanoguera, David; Carbonell Verdú, Alfredo; Ferri Azor, José Miguel

    2016-01-01

    The aim of this study was to analyze the durability of a plasma treatment on the surface of poly(lactic acid) (PLA). We used atmospheric-plasma treatment with air to improve the wettability of PLA by evaluating the aging effect under controlled conditions of relative humidity (RH) and temperature (25% RH and 258C). We studied the durability of the atmospheric-plasma treatment by measuring the contact angle, calculating the surface energy, and observing changes in the resistance of th...

  13. Platelet-rich plasma: the PAW classification system.

    Science.gov (United States)

    DeLong, Jeffrey M; Russell, Ryan P; Mazzocca, Augustus D

    2012-07-01

    Platelet-rich plasma (PRP) has been the subject of hundreds of publications in recent years. Reports of its effects in tissue, both positive and negative, have generated great interest in the orthopaedic community. Protocols for PRP preparation vary widely between authors and are often not well documented in the literature, making results difficult to compare or replicate. A classification system is needed to more accurately compare protocols and results and effectively group studies together for meta-analysis. Although some classification systems have been proposed, no single system takes into account the multitude of variables that determine the efficacy of PRP. In this article we propose a simple method for organizing and comparing results in the literature. The PAW classification system is based on 3 components: (1) the absolute number of Platelets, (2) the manner in which platelet Activation occurs, and (3) the presence or absence of White cells. By analyzing these 3 variables, we are able to accurately compare publications.

  14. Graft polymerization and plasma treatment of polymer membranes for fouling reduction: a review.

    Science.gov (United States)

    Kochkodan, Victor M; Sharma, Virender K

    2012-01-01

    This article presents a review of recent developments in surface modification of polymer membranes via graft polymerization and plasma treatment for reduction of fouling with organic compounds and microorganisms in pressure driven membrane processes. The factors affecting membrane fouling, such as membrane hydrophilicity, charge and surface roughness are discussed. The recent studies in which the reduction of organic fouling and biofouling by the modification of the membrane surface via ultraviolet/redox initiated surface grafting of hydrophilic polymers and low temperature plasma treatment are reviewed.

  15. Enzymatic Modification of Plasma Low Density Lipoproteins in Rabbits: A Potential Treatment for Hypercholesterolemia

    Science.gov (United States)

    Labeque, Regine; Mullon, Claudy J. P.; Ferreira, Joao Paulo M.; Lees, Robert S.; Langer, Robert

    1993-04-01

    Phospholipase A_2 (EC 3.1.1.4) hydrolyzes certain phospholipids of low density lipoprotein (LDL). Plasma clearance of phospholipase A_2-modified human LDL is up to 17 times faster than that of native human LDL in hypercholesterolemic rabbits. Modification of blood lipoproteins of hypercholesterolemic rabbits was performed by using an extracorporeal circuit containing immobilized phospholipase A_2. After 90-min treatments, nearly 30% decreases in plasma cholesterol concentrations were observed. Erythrocyte, leukocyte, and platelet counts showed no net change after treatment. This technique does not require any fluid replacement or sorbent regeneration and offers a potential approach for lowering serum cholesterol and LDL levels.

  16. Surface Modification of Electrospun PVDF/PAN Nanofibrous Layers by Low Vacuum Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Fatma Yalcinkaya

    2016-01-01

    Full Text Available Nanofibres are very promising for water remediation due to their high porosity and small pore size. Mechanical properties of nanofibres restrict the application of pressure needed water treatments. Various PAN, PVDF, and PVDF/PAN nanofibre layers were produced, and mechanical properties were improved via a lamination process. Low vacuum plasma treatment was applied for the surface modification of nanofibres. Atmospheric air was used to improve hydrophilicity while sulphur hexafluoride gas was used to improve hydrophobicity of membranes. Hydrophilic membranes showed higher affinity to attach plasma particles compared to hydrophobic membranes.

  17. Continuous Plasma Treatment of Ultra-High-Molecular-Weight Polyethylene (UHMWPE) Fibres for Adhesion Improvement

    DEFF Research Database (Denmark)

    Teodoru, Steluta; Kusano, Yukihiro; Rozlosnik, Noemi

    2009-01-01

    A dielectric barrier discharge in Ar, He, He/O2, N2 or O2 at atmospheric pressure was used for the continuous plasma treatment of UHMWPE fibres. The influence of the input power of the discharge and the gas flow rate on surface modification is studied with the aim of adhesion improvement. Surface...... characterization using X-ray photoelectron spectroscopy and atomic force microscopy shows a significant increase in polar functional groups and roughness at the surfaces after plasma treatment, indicating that adhesive properties can be improved....

  18. Surface compositional changes in GaAs subjected to argon plasma treatment

    Energy Technology Data Exchange (ETDEWEB)

    Surdu-Bob, C.C.; Sullivan, J.L.; Saied, S.O.; Layberry, R.; Aflori, M

    2002-12-30

    X-ray photoelectron spectroscopy (XPS) has been employed to study surface compositional changes in GaAs (1 0 0) subjected to argon plasma treatment. The experimental results have been explained in terms of predicted argon ion energies, measured ion densities and etch rates. A model is proposed for the processes taking place at the surface of GaAs in terms of segregation, sputtering and surface relaxation. Stopping and range of ions in matter (SRIM) code has also been employedan aid to identification of the mechanisms responsible for the compositional changes. Argon plasma treatment induced surface oxidation at very low energies and sputtering and surface damage with increasing energy.

  19. Effects of temperature and plasma treatment on mechanical properties of ceramic fibres

    OpenAIRE

    N.T. Xiem*, D. Kroisová, P. Louda, T.D. Hung, Z. Rozek; D. Kroisová; P. Louda; T.D. Hung; Z. Rozek

    2009-01-01

    Purpose: The aim of this study is an investigation and comparison of mechanical properties of ceramic fibres after they were influenced by temperature and plasma treatment.Design/methodology/approach: Single filament after being processed at different temperatures (200oC, 400oC, 700oC and 1000oC) and methane plasma treatment was separated with a magnifier, prepared on a punched mounting tab, and was evaluated in accordance with Japanese Industrial Standard.Findings: Preliminary results of the...

  20. Plasma drug activity assay for treatment optimization in tuberculosis patients

    NARCIS (Netherlands)

    Heysell, S.K.; Mtabho, C.; Mpagama, S.; Mwaigwisya, S.; Pholwat, S.; Ndusilo, N.; Gratz, J.; Aarnoutse, R.E.; Kibiki, G.S.; Houpt, E.R.

    2011-01-01

    Low antituberculosis (TB) drug levels are common, but their clinical significance remains unclear, and methods of measurement are resource intensive. Subjects initiating treatment for sputum smear-positive pulmonary TB were enrolled from Kibong'oto National TB Hospital, Tanzania, and levels of isoni

  1. Atmospheric pressure plasma treatment of glassy carbon for adhesion improvement

    DEFF Research Database (Denmark)

    Kusano, Yukihiro; Mortensen, Henrik Junge; Stenum, Bjarne

    2007-01-01

    Glassy carbon plates were treated with an atmospheric pressure dielectric barrier discharge (DBD). He gas, gas mixtures of He and reactive gases such as O2, CO2 and NH3, Ar gas and Ar/NH3 gas mixture were used as treatment gases. The oxygen and nitrogen contents on the surface as well as defect...

  2. Platelet-rich plasma as a novel treatment for lichen planopillaris.

    Science.gov (United States)

    Bolanča, Željana; Goren, Andy; Getaldić-Švarc, Biserka; Vučić, Majda; Šitum, Mirna

    2016-07-01

    Treatment of lichen planopillaris (LPP) remains a significant challenge due to the irreversible damage inflicted on hair follicles combined with the low efficacy of existing treatments. We hypothesized that growth factors released by the use of platelet-rich plasma (PRP) may arrest the development of LPP. To test our hypothesis, we treated an LPP patient that has failed previous treatments with a new PRP regimen. Following PRP treatment and six months follow-up, the patient experienced complete regression of itching and hair shedding. To the best of our knowledge, this is the first report of successful treatment of LPP with a PRP regimen.

  3. Sustainability of a public system for plasma collection, contract fractionation and plasma-derived medicinal product manufacturing.

    Science.gov (United States)

    Grazzini, Giuliano; Ceccarelli, Anna; Calteri, Deanna; Catalano, Liviana; Calizzani, Gabriele; Cicchetti, Americo

    2013-09-01

    In Italy, the financial reimbursement for labile blood components exchanged between Regions is regulated by national tariffs defined in 1991 and updated in 1993-2003. Over the last five years, the need for establishing standard costs of healthcare services has arisen critically. In this perspective, the present study is aimed at defining both the costs of production of blood components and the related prices, as well as the prices of plasma-derived medicinal products obtained by national plasma, to be used for interregional financial reimbursement. In order to analyse the costs of production of blood components, 12 out 318 blood establishments were selected in 8 Italian Regions. For each step of the production process, driving costs were identified and production costs were. To define the costs of plasma-derived medicinal products obtained by national plasma, industrial costs currently sustained by National Health Service for contract fractionation were taken into account. The production costs of plasma-derived medicinal products obtained from national plasma showed a huge variability among blood establishments, which was much lower after standardization. The new suggested plasma tariffs were quite similar to those currently in force. Comparing the overall costs theoretically sustained by the National Health Service for plasma-derived medicinal products obtained from national plasma to current commercial costs, demonstrates that the national blood system could gain a 10% cost saving if it were able to produce plasma for fractionation within the standard costs defined in this study. Achieving national self-sufficiency through the production of plasma-derived medicinal products from national plasma, is a strategic goal of the National Health Service which must comply not only with quality, safety and availability requirements but also with the increasingly pressing need for economic sustainability.

  4. Parametric instabilities in an electron beam plasma system

    Energy Technology Data Exchange (ETDEWEB)

    Nakach, R.; Cuperman, S.; Gell, Y.; Levush, B.

    1981-08-01

    The excitation of low-frequency parametric instabilities by a finite wavelength pump in a system consisting of a warm electron plasma traversed by a warm electron beam is investigated in a fluid dissipationless model. The dispersion relation for the three-dimensional problem in a magnetized plasma with arbitrary directions for the waves is derived, and the one-dimensional case is analyzed numerically. For the one-dimensional back-scattering decay process, it is found that when the plasma-electron Debye length (lambda/sub D//sup p/) is larger than the beam-electron Debye length (lambda/sub D//sup b/), two low-frequency electrostatic instability branches with different growth rates may exist simultaneously. When lambda/sub D//sup p/approx. =lambda/sub D//sup b/, the large growth rate instability found in the analysis depends strongly on the amplitude of the pump field. For the case lambda/sub D//sup p/

  5. MERCURY OXIDIZATION IN NON-THERMAL PLASMA BARRIER DISCHARGE SYSTEM

    Energy Technology Data Exchange (ETDEWEB)

    V.K. Mathur

    2003-02-01

    In the past decade, the emission of toxic elements from human activities has become a matter of great public concern. Hg, As, Se and Cd typically volatilize during a combustion process and are not easily caught with conventional air pollution control techniques. In addition, there is no pollution prevention technique available now or likely be available in the foreseeable future that can prevent the emission of these trace elements. These trace elements pose additional scientific challenge as they are present at only ppb levels in large gas streams. Mercury, in particular, has attracted significant attention due to its high volatility, toxicity and potential threat to human health. In the present research work, a non-thermal plasma dielectric barrier discharge technique has been used to oxidize Hg{sup 0}(g) to HgO. The basic premise of this approach is that Hg{sup 0} in vapor form cannot be easily removed in an absorption tower whereas HgO as a particulate is amiable to water scrubbing. The work presented in this report consists of three steps: (1) setting-up of an experimental apparatus to generate mercury vapors at a constant rate and modifying the existing non-thermal plasma reactor system, (2) solving the analytical challenge for measuring mercury vapor concentration at ppb level, and (3) conducting experiments on mercury oxidation under plasma conditions to establish proof of concept.

  6. Energy-dependent finite-orbit treatment for plasma buildup in mirror fusion devices

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, M.M.

    1980-01-01

    A computer simulation of hot plasma buildup in mirror fusion devices and results from this model are presented. In a small, hot magnetically confined plasma, the ion orbit radius (rho/sub i/) can be comparable to the plasma radius (R/sub p/). It a mirror-confined plasma were rho/sub i//R/sub p/ > 1/25 (such as 2XII-B), a point kinetic treatment of ion interactions becomes inaccurate and a finite gyro-radius (FGR) treatment must be used to adequately describe plasma buildup processes. This is particularly true for describing losses due to cold-gas charge exchange (c-x) near the plasma surface, since a particle lost near the vacuum interface may have contributed to the density as far as 2 rho/sub i/ radially inward from the c-x point. A similar FGR effect applies to beam-deposited ions whose large orbits influence the density up to 2 rho/sub i/ from the trapping point.

  7. Systemic effects of locally injected platelet rich plasma in a rat model: an analysis on muscle and bloodstream.

    Science.gov (United States)

    Borrione, P; Grasso, L; Racca, S; Abbadessa, G; Carriero, V; Fagnani, F; Quaranta, F; Pigozzi, F

    2015-01-01

    Abundant evidence suggests that growth factors, contained in platelets alpha granules, may play a key role in the early stages of the muscle healing process with particular regard to the inflammatory phase. Although the contents of the platelet-rich plasma preparations have been extensively studied, the biological mechanisms involved as well as the systemic effects and the related potential doping implications of this approach are still largely unknown. The aim of the present study was to investigate whether local platelet-rich plasma administration may modify the levels of specific cytokines and growth factors both in treated muscle and bloodstream in rats. An additional aim was to investigate more deeply whether the local platelet-rich plasma administration may exert systemic effects by analyzing contralateral lesioned but untreated muscles. The results showed that platelet-rich plasma treatment induced a modification of certain cytokines and growth factor levels in muscle but not in the bloodstream, suggesting that local platelet-rich plasma treatment influenced directly or, more plausibly, indirectly the synthesis or recruitment of cytokines and growth factors at the site of injury. Moreover, the observed modifications of cytokine and growth factor levels in contralateral injured but not treated muscles, strongly suggested a systemic effect of locally injected platelet-rich plasma.

  8. In-package atmospheric pressure cold plasma treatment of cherry tomatoes.

    Science.gov (United States)

    Misra, Nrusimha Nath; Keener, Kevin M; Bourke, Paula; Mosnier, Jean-Paul; Cullen, Patrick J

    2014-08-01

    Cold plasma is increasingly under research for decontamination of foods, especially fresh fruits and vegetables. The effect of cold plasma on food quality, however, remains under researched. This study investigates the effects of cold plasma generated within a sealed package from a dielectric barrier discharge on the physical quality parameters and respiration rates of cherry tomatoes. Respiration rates and weight loss were monitored continuously, while other parameters are reported at the end of storage period. Differences among weight loss, pH and firmness for control and treated cherry tomatoes were insignificant towards the end of storage life. Changes in respiration rates and colour of tomatoes were recorded as a function of treatment, which were not drastic. The results implicate that cold plasma could be employed as a means for decontamination of cherry tomatoes while retaining product quality.

  9. Dynamic Wettability of Different Adhesives on Wheat Straw Surface Modified by Cold Oxygen Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Xuehui Yang

    2014-02-01

    Full Text Available The effects of cold oxygen plasma treatment on the exterior and interior surfaces and wettability of wheat straw were investigated. The wheat straw was treated with oxygen plasma for 150 s, and the radio-frequency power was set at 100 W. The surface wettability was evaluated by measuring the contact angles and the K values of urea-formaldehyde, phenol-formaldehyde, and methylene diphenyl diisocyanate resins. Specimens with different gluing surfaces were bonded together with urea-formaldehyde and phenol-formaldehyde and then hot-pressed to assess bonding strength. Results indicate that the dynamic wettability and the shear strength of wheat straw were remarkably improved after it was exposed to the cold oxygen plasma. Additionally, the adhesive type and the wheat straw surface characteristics had significant effects on the dynamic wettability and bonding strength of both untreated and plasma-treated wheat straw.

  10. Treatment of refractory powders by a novel, high enthalpy dc plasma

    Science.gov (United States)

    Pershin, L.; Mitrasinovic, A.; Mostaghimi, J.

    2013-06-01

    Thermophysical properties of CO2-CH4 mixtures at high temperatures are very attractive for materials processing. In comparison with argon, at the same temperature, such a mixture possesses much higher enthalpy and higher thermal conductivity. At high temperatures, CO2-CH4 mixture has a complex composition with strong presence of CO which, in the case of powder treatment, could reduce oxidation. In this work, a dc plasma torch with graphite cathode was used to study the effect of plasma gas composition on spheroidization of tungsten carbide and alumina powders. Two different gas compositions were used to generate the plasma while the torch current was kept at 300 A. Various techniques were employed to assess the average concentration of carbides and oxides and the final shape of the treated powders. Process parameters such as input power and plasma gas composition allow controlling the degree of powder oxidation and spheroidization of high melting point ceramic powders.

  11. On the history of plasma treatment and comparison of microbiostatic efficacy of a historical high-frequency plasma device with two modern devices

    Directory of Open Access Journals (Sweden)

    Napp, Judith

    2015-06-01

    Full Text Available Background: Cold atmospheric pressure plasma (CAP with its many bioactive properties has defined a new medical field: the plasma medicine. However, in the related form of high-frequency therapy, CAP was even used briefly a century ago. The aim of this study was to review historic CAP treatments and to obtain data regarding the antimicrobial efficacy of a historical high-frequency plasma device.Methods: First, historic literature regarding the history of CAP treatment was evaluated, because in the modern literature no data were available. Second, the susceptibility of 5 different bacterial wound isolates, cultured on agar, to a historic plasma source (violet wand [VW] and two modern devices (atmospheric pressure plasma jet [APPJ] and Dielectric Barrier Discharge [DBD] was analyzed . The obtained inhibition areas (IA were compared.Results: First, the most convenient popular historical electromedical treatments produced a so-called effluvia by using glass electrodes, related to today’s CAP. Second, all three tested plasma sources showed complete eradication of all tested microbial strains in the treated area. The “historical” cold VW plasma showed antimicrobial effects similar to those of modern APPJ and DBD regarding the diameter of the IA.Conclusion: Some retrograde evidence may be deducted from this, especially for treatment of infectious diseases with historical plasma devices. The underlying technology may serve as model for construction of modern sucessive devices.

  12. Support Systems for Treatment Integrity

    Science.gov (United States)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    2016-01-01

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately operationalized treatment integrity procedures…

  13. New Treatment Options for Osteosarcoma - Inactivation of Osteosarcoma Cells by Cold Atmospheric Plasma.

    Science.gov (United States)

    Gümbel, Denis; Gelbrich, Nadine; Weiss, Martin; Napp, Matthias; Daeschlein, Georg; Sckell, Axel; Ender, Stephan A; Kramer, Axel; Burchardt, Martin; Ekkernkamp, Axel; Stope, Matthias B

    2016-11-01

    Cold atmospheric plasma has been shown to inhibit tumor cell growth and induce tumor cell death. The aim of the study was to investigate the effects of cold atmospheric plasma treatment on proliferation of human osteosarcoma cells and to characterize the underlying cellular mechanisms. Human osteosarcoma cells (U2-OS and MNNG/HOS) were treated with cold atmospheric plasma and seeded in culture plates. Cell proliferation, p53 and phospho-p53 protein expression and nuclear morphology were assessed. The treated human osteosarcoma cell lines exhibited attenuated proliferation rates by up to 66%. The cells revealed an induction of p53, as well as phospho-p53 expression, by 2.3-fold and 4.5-fold, respectively, compared to controls. 4',6-diamidino-2-phenylindole staining demonstrated apoptotic nuclear condensation following cold atmospheric plasma treatment. Cold atmospheric plasma treatment significantly attenuated cell proliferation in a preclinical in vitro osteosarcoma model. The resulting increase in p53 expression and phospho-activation in combination with characteristic nuclear changes indicate this was through induction of apoptosis. Copyright© 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  14. Influence of plasma-treatments on the structure, superstructure, and function of membrane lipids

    Science.gov (United States)

    Hammer, Malte U.; Forbrig, Enrico; Weltmann, Klaus-Dieter; Reuter, Stephan

    2012-10-01

    Every cell, eu- or prokaryotic, has a membrane as an interface to the environment. Every substance that is applied from outside the cell has to interact with it. This includes plasma-generated reactive species in the liquid cell environment created by plasma-treatment. By the Singer and Nicolson model, proteins are embedded in a lipid bilayer. Proteins are the functional elements, lipids are the structural elements. Due to the amphiphilic nature of the lipids, they form (super-) structures in an aqueous environment. The exact superstructure is determined by a structural parameter of the lipid, its shape. Here, we show experiments on lipids by fluorophore-based liposome assays and raman spectroscopy. The results show a membrane-activity of plasma-born reactive species against lipids and lipid structures. Based on this results and literature, we propose a model for a lesion-forming mechanism in membranes of some reactive species created by plasma-treatment. It is based on a hydrophobic-hydrophilic mismatch due to lipid peroxidization induced by reactive species generated in liquids by plasma-treatment.

  15. Effect of Cold Plasma Treatment on Seed Germination and Growth of Wheat

    Science.gov (United States)

    Jiang, Jiafeng; He, Xin; Li, Ling; Li, Jiangang; Shao, Hanliang; Xu, Qilai; Ye, Renhong; Dong, Yuanhua

    2014-01-01

    This study investigated the effect of cold helium plasma treatment on seed germination, growth and yield of wheat. The effects of different power of cold plasma on the germination of treated wheat seeds were studied. We found that the treatment of 80 W could significantly improve seed germination potential (6.0%) and germination rate (6.7%) compared to the control group. Field experiments were carried out for wheat seeds treated with 80 W cold plasma. Compared with the control, plant height (20.3%), root length (9.0%) and fresh weight (21.8%) were improved significantly at seedling stage. At booting stage, plant height, root length, fresh weight, stem diameter, leaf area and leaf thickness of the treated plant were respectively increased by 21.8%, 11.0%, 7.0%, 9.0%, 13.0% and 25.5%. At the same time, the chlorophyll content (9.8%), nitrogen (10.0%) and moisture content (10.0%) were higher than those of the control, indicating that cold plasma treatment could promote the growth of wheat. The yield of treated wheat was 7.55 t · ha-1, 5.89% more than that of the control. Therefore, our results show that cold plasma has important application prospects for increasing wheat yield.

  16. New Horizons: Gas and Plasma in the Pluto System

    Science.gov (United States)

    Young, Leslie; Gladstone, Randy; Summers, Michael; Bagenal, Fran; Stern, S. Alan; Weaver, Harold A.; Olkin, Catherine B.; Ennico, Kimberly; Moore, Jeffrey M.; Grundy, William M.; New Horizons Atmospheres Science Theme Team, New Horizons Particles and Plasma Science Theme Team

    2016-10-01

    NASA's New Horizons mission gave us information about gas and plasma in the Pluto system from Pluto's surface up to a distance of ~200,000 km beyond Pluto. This review will give an overview of our current theories and observations of the near-surface atmospheric structure; the properties, production and settling of Pluto's ubiquitous haze; the minor atmospheric species and atmospheric chemistry; the energetics and high-altitude thermal structure; the escape rate and the pickup of methane ions; the effect of methane impacting Charon; and Pluto's heavy-ion tail. Details are given in other presentations at this conference.This work was supported by NASA's New Horizons project.

  17. Pathogen inactivation treatment of plasma and platelet concentrates and their predicted functionality in massive transfusion protocols.

    Science.gov (United States)

    Arbaeen, Ahmad F; Schubert, Peter; Serrano, Katherine; Carter, Cedric J; Culibrk, Brankica; Devine, Dana V

    2017-05-01

    Trauma transfusion packages for hemorrhage control consist of red blood cells, plasma, and platelets at a set ratio. Although pathogen reduction improves the transfusion safety of platelet and plasma units, there is an associated reduction in quality. This study aimed to investigate the impact of riboflavin/ultraviolet light-treated plasma or platelets in transfusion trauma packages composed of red blood cell, plasma, and platelet units in a ratio of 1:1:1 in vitro by modeling transfusion scenarios for trauma patients and assessing function by rotational thromboelastometry. Pathogen-reduced or untreated plasma and buffy coat platelet concentrate units produced in plasma were used in different combinations with red blood cells in trauma transfusion packages. After reconstitution of these packages with hemodiluted blood, the hemostatic functionality was analyzed by rotational thromboelastometry. Hemostatic profiles of pathogen-inactivated buffy coat platelet concentrate and plasma indicated decreased activity compared with their respective controls. Reconstitution of hemodiluted blood (hematocrit = 20%) with packages that contained treated or nontreated components resulted in increased alpha and maximum clot firmness and enhanced clot-formation time. Simulating transfusion scenarios based on 30% blood replacement with a transfusion trauma package resulted in a nonsignificant difference in rotational thromboelastometry parameters between packages containing treated and nontreated blood components (p ≥ 0.05). Effects of pathogen inactivation treatment were evident when the trauma package percentage was 50% or greater and contained both pathogen inactivation-treated plasma and buffy coat platelet concentrate. Rotational thromboelastometry investigations suggest that there is relatively little impact of pathogen inactivation treatment on whole blood clot formation unless large amounts of treated components are used. © 2017 AABB.

  18. Is aceruloplasminemia treatable? Combining iron chelation and fresh-frozen plasma treatment.

    Science.gov (United States)

    Poli, L; Alberici, A; Buzzi, P; Marchina, E; Lanari, A; Arosio, C; Ciccone, A; Semeraro, F; Gasparotti, R; Padovani, A; Borroni, Barbara

    2017-02-01

    We report the case of a patient with hereditary ceruloplasmin deficiency due to a novel gene mutation in ceruloplasmin gene (CP), treated with fresh frozen plasma (FFP) and iron chelation therapy. A 59-year-old man with a past history of diabetes was admitted to our department due to progressive gait difficulties and cognitive impairment. Neurological examination revealed a moderate cognitive decline, with mild extrapyramidal symptoms, ataxia, and myoclonus. Brain T2-weighted MR imaging showed bilateral basal ganglia hypointensity with diffuse iron deposition. Increased serum ferritin, low serum copper concentration, undetectable ceruloplasmin, and normal urinary copper excretion were found. The genetic analysis of the CP (OMIM #604290) reported compound heterozygosity for two mutations, namely c.848G > A and c.2689_2690delCT. Treatment with FFP (500 mL i.v./once a week) and administration of iron chelator (Deferoxamine 1000 mg i.v/die for 5 days, followed by Deferiprone 500 mg/die per os) were undertaken. At the 6-month follow-up, clinical improvement of gait instability, trunk ataxia, and myoclonus was observed; brain MRI scan showed no further progression of basal ganglia T2 hypointensity. This case report suggests that the early initiation of combined treatment with FFP and iron chelation may be useful to reduce the accumulation of iron in the central nervous system and to improve the neurological symptoms.

  19. Plasma TIMP-1 levels and treatment outcome in patients treated with XELOX for metastatic colorectal cancer.

    Science.gov (United States)

    Frederiksen, C; Qvortrup, C; Christensen, I J; Glimelius, B; Berglund, A; Jensen, B V; Nielsen, S E; Keldsen, N; Nielsen, H J; Brünner, N; Pfeiffer, P

    2011-02-01

    The aim was to evaluate the association between plasma tissue inhibitor of metalloproteinase-1 (TIMP-1) and serum carcinoembryonic antigen (CEA) levels and outcome in patients with metastatic colorectal cancer (mCRC) receiving XELOX (combination chemotherapy with capecitabine and oxaliplatin) as first-line treatment. One hundred and twenty patients were included. Blood samples were collected before treatment and 3 weeks later before the next treatment cycle. Plasma TIMP-1 and serum CEA levels were correlated to treatment outcome. No significant associations between baseline TIMP-1 or CEA levels and best response to treatment or progression-free survival (PFS) could be demonstrated. In contrast, high baseline plasma TIMP-1 levels were associated with poor overall survival (OS), P = 0.008, hazard ratio (HR) = 1.80 [95% confidence interval (CI): 1.17-2.78]. Furthermore, increase in TIMP-1 levels from baseline to immediately before the second cycle of chemotherapy had a significant negative effect on survival (P = 0.03, HR = 1.30, 95% CI: 1.02-1.65) while a decrease in TIMP-1 was significantly associated with a higher objective response rate (P = 0.03). Both high baseline and subsequent increase in TIMP-1 levels were associated with shorter OS in patients with mCRC receiving XELOX as first-line treatment, whereas baseline TIMP-1 levels were not associated with response or PFS following XELOX treatment.

  20. Inductively Coupling Plasma (ICP) Treatment of Propylene (PP) Surface and Adhesion Improvement

    Science.gov (United States)

    Liu, Yenchun; Fu, Yenpei

    2009-12-01

    Study on increasing the roughness of the polymer substrate surface to enhance the adhesion with the copper layer in an inductively coupling plasma (ICP) process was carried out. The microstructure of the polymer substrate surfaces, which were exposed to different kinds of plasma treatment, was identified by scanning electron microscopy(SEM) analysis, peel strength of the copper coating and water surface contact angle. The adhesion of the substrate was largely enhanced by plasma treatment and the copper deposited coating reached a value of 7.68 kgf/m in verifying the adhesion of the copper coating with polymer material. The quality of the line/space 50/50 μm produced in the laboratory was examined by the pressure cooker test and proved to meet the requirement.

  1. Atmospheric-pressure plasma jet characterization and applications on melanoma cancer treatment (B/16-F10)

    Energy Technology Data Exchange (ETDEWEB)

    Mashayekh, Shahriar [Physics Department, Shahid Beheshti University, G.C., Evin, 19839-63113 Tehran, Islamic Republic of Iran (Iran, Islamic Republic of); Rajaee, Hajar; Hassan, Zuhir M. [Imonology Department, Faculty of Medical Science, Tarbiat Modarres University, Tehran (Iran, Islamic Republic of); Akhlaghi, Morteza [Laser-Plasma Research Institute, Shahid Beheshti University, G.C., Evin, 19839-63113 Tehran, Islamic Republic of Iran (Iran, Islamic Republic of); Shokri, Babak [Physics Department and Laser-Plasma Research Institute, Shahid Beheshti University, G.C., Evin, 19839-63113 Tehran, Islamic Republic of Iran (Iran, Islamic Republic of)

    2015-09-15

    A new approach in medicine is the use of cold plasma for various applications such as sterilization blood coagulation and cancer cell treatment. In this paper, a pin-to-hole plasma jet for biological applications has been designed and manufactured and characterized. The characterization includes power consumption via Lissajous method, thermal behavior of atmospheric-pressure plasma jet by using Infra-red camera as a novel method and using Speicair software to determine vibrational and transitional temperatures, and optical emission spectroscopy to determine the generated species. Treatment of Melanoma cancer cells (B16/F10) was also implemented, and tetrazolium salt dye (MTT assay) and flow cytometry were used to evaluate viability. Effect of ultraviolet photons on cancerous cells was also observed using an MgF{sub 2} crystal with MTT assay. Finally, in-vivo studies on C57 type mice were also done in order to have a better understanding of the effects in real conditions.

  2. Atmospheric-pressure plasma jet characterization and applications on melanoma cancer treatment (B/16-F10)

    Science.gov (United States)

    Mashayekh, Shahriar; Rajaee, Hajar; Akhlaghi, Morteza; Shokri, Babak; Hassan, Zuhir M.

    2015-09-01

    A new approach in medicine is the use of cold plasma for various applications such as sterilization blood coagulation and cancer cell treatment. In this paper, a pin-to-hole plasma jet for biological applications has been designed and manufactured and characterized. The characterization includes power consumption via Lissajous method, thermal behavior of atmospheric-pressure plasma jet by using Infra-red camera as a novel method and using Speicair software to determine vibrational and transitional temperatures, and optical emission spectroscopy to determine the generated species. Treatment of Melanoma cancer cells (B16/F10) was also implemented, and tetrazolium salt dye (MTT assay) and flow cytometry were used to evaluate viability. Effect of ultraviolet photons on cancerous cells was also observed using an MgF2 crystal with MTT assay. Finally, in-vivo studies on C57 type mice were also done in order to have a better understanding of the effects in real conditions.

  3. Enhancement of ZnO-Based Photocatalyst Activity by RF Discharge-Plasma Treatment*

    Science.gov (United States)

    Savastenko, N. A.; Filatov, I. I.; Lyushkevich, V. A.; Chubrik, N. I.; Gabdullin, M. T.; Ramazanov, T. S.; Abdullin, H. A.; Kalkozova, V. A.

    2016-11-01

    The structure and photocatalytic properties of polydisperse zinc oxide (ZnO) powder treated with a low-pressure radio-frequency (RF) plasma discharge were studied. The photocatalytic properties of ZnO before and after the treatment were studied with respect to photodegradation of organic impurities using decomposition of methyl orange in aqueous solution by UV light as an example. It was found that the photodegradation kinetics were described well by first-order equations. The photodegradation mechanisms of methyl orange over untreated and plasma-treated ZnO samples were different. It was shown that the effectiveness of the photodegradation expressed in terms of reaction constants increased by 20% after RF discharge-plasma treatment of the photocatalyst.

  4. ACUPUNCTURE TREATMENT OF MIGRAINE AND PLASMA CGRP AND SP CONTENT CHANGES

    Institute of Scientific and Technical Information of China (English)

    李炜; 钟广伟; 祁敏; 刘卫平; 王素娥; 文玲波; 徐琳兰; 陈欣; 龙春香; 李学文

    2001-01-01

    Objective: To observe the therapeutic effect of acupuncture in treatment of migraine and the accompanied changes of plasma CGRP and SP. Methods: 186 migraine patients were randomly divided into acupuncture group (n= 126) and medication group (n=60). Acupoints used were Taichong (LR 3), Xingjian (LR 2), Fengchi (GB 20) and Yanglingquan (GB 34). Patients of the medication (control) group were asked to take Nimodipine 30 mg (3 timesper day), Sibelium 5 mg (once every night), and Ergotamine caffeine (taken during attack). Plasma CGRP and SP contents were detected by using radioimmunoassay. Results: The therapeutic effect of acupuncture was significantly superior to that of medication group (P<0.01). In migraine patients, plasma CGRP and SP levels were significantly higher than those of normal people (P<0.01). After acupuncture treatment, CGRP and SP levels lowered obviously (P<0.05).

  5. Hydrogen plasma treatment for improved conductivity in amorphous aluminum doped zinc tin oxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Masis, M., E-mail: monica.moralesmasis@epfl.ch; Ding, L.; Dauzou, F. [Photovoltaics and Thin-Film Electronics Laboratory (PVLab), Institute of Microengineering (IMT), Ecole Polytechnique Fédérale de Lausanne - EPFL, Rue de la Maladière 71b, CH-2002 Neuchatel (Switzerland); Jeangros, Q. [Interdisciplinary Centre for Electron Microscopy, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne (Switzerland); Hessler-Wyser, A. [Photovoltaics and Thin-Film Electronics Laboratory (PVLab), Institute of Microengineering (IMT), Ecole Polytechnique Fédérale de Lausanne - EPFL, Rue de la Maladière 71b, CH-2002 Neuchatel (Switzerland); Interdisciplinary Centre for Electron Microscopy, Ecole Polytechnique Fédérale de Lausanne (EPFL), Lausanne (Switzerland); Nicolay, S. [Centre Suisse d’Electronique et de Microtechnique (CSEM) SA, Rue Jaquet-Droz 1, CH-2002 Neuchatel (Switzerland); Ballif, C. [Photovoltaics and Thin-Film Electronics Laboratory (PVLab), Institute of Microengineering (IMT), Ecole Polytechnique Fédérale de Lausanne - EPFL, Rue de la Maladière 71b, CH-2002 Neuchatel (Switzerland); Centre Suisse d’Electronique et de Microtechnique (CSEM) SA, Rue Jaquet-Droz 1, CH-2002 Neuchatel (Switzerland)

    2014-09-01

    Improving the conductivity of earth-abundant transparent conductive oxides (TCOs) remains an important challenge that will facilitate the replacement of indium-based TCOs. Here, we show that a hydrogen (H{sub 2})-plasma post-deposition treatment improves the conductivity of amorphous aluminum-doped zinc tin oxide while retaining its low optical absorption. We found that the H{sub 2}-plasma treatment performed at a substrate temperature of 50 °C reduces the resistivity of the films by 57% and increases the absorptance by only 2%. Additionally, the low substrate temperature delays the known formation of tin particles with the plasma and it allows the application of the process to temperature-sensitive substrates.

  6. Low technology systems for wastewater treatment: perspectives.

    Science.gov (United States)

    Brissaud, F

    2007-01-01

    Low technology systems for the treatment of wastewater are sometimes presented as remnants of the past, nowadays supposedly only meant to serve developing countries and remote rural areas. However, considering their advantages and disadvantages together with enhanced treatment requirements and recent research and technological developments, the future of these systems still appears promising. Successful applications of low technology systems require that more care is taken of their design and operation than often observed. Correlatively, more efforts should be made to decipher the treatment mechanisms and determine the related reaction parameters, so as to provide more deterministic approaches of the natural wastewater treatment systems and better predict their performance.

  7. Heat treatment process of new NdFeB magnet prepared by spark plasma sintering

    Institute of Scientific and Technical Information of China (English)

    李涛; 岳明; 张久兴; 王公平; 肖耀福; 王润

    2003-01-01

    In recent years, spark plasma sintering technique(SPS) has been a focus in the field of material preparation due to its advantages. SPS technique is first introduced for preparation of high quality NdFeB magnets. The effects of heat treatment process on the magnetic properties of SPS NdFeB magnet were investigated. Meanwhile, the effects of heat treatment process on the microstructure, tropism and dimensional precision of the SPS NdFeB magnets were also studied. The high quality NdFeB magnets with fine grains were prepared under proper heat treatment process. The results show that the magnetic properties of SPS NdFeB can be further improved through proper heat treatment process. Meanwhile, the experiment also demonstrates that it is feasible to prepare near-net-shape NdFeB magnets with fine grains and high magnetic property by spark plasma sintering.

  8. Investigation of Plasma Treatment on Micro-Injection Moulded Microneedle for Drug Delivery.

    Science.gov (United States)

    Nair, Karthik; Whiteside, Benjamin; Grant, Colin; Patel, Rajnikant; Tuinea-Bobe, Cristina; Norris, Keith; Paradkar, Anant

    2015-10-30

    Plasma technology has been widely used to increase the surface energy of the polymer surfaces for many industrial applications; in particular to increase in wettability. The present work was carried out to investigate how surface modification using plasma treatment modifies the surface energy of micro-injection moulded microneedles and its influence on drug delivery. Microneedles of polyether ether ketone and polycarbonate and have been manufactured using micro-injection moulding and samples from each production batch have been subsequently subjected to a range of plasma treatment. These samples were coated with bovine serum albumin to study the protein adsorption on these treated polymer surfaces. Sample surfaces structures, before and after treatment, were studied using atomic force microscope and surface energies have been obtained using contact angle measurement and calculated using the Owens-Wendt theory. Adsorption performance of bovine serum albumin and release kinetics for each sample set was assessed using a Franz diffusion cell. Results indicate that plasma treatment significantly increases the surface energy and roughness of the microneedles resulting in better adsorption and release of BSA.

  9. [CPFA (coupled plasma filtration absorption) treatment of septic shock. A retrospective study of nine patients].

    Science.gov (United States)

    Maruccio, Gianfranco; Montanaro, Alessio; Schiavone, Palmira; Fumarola, Martino; Flores, Antonio; Strippoli, Paolo; Caretto, Vincenzo; Paladini, Daniele; Ramunni, Alfonso

    2012-01-01

    Coupled plasma filtration absorption (CPFA) can increase blood pressure in septic shock and reduce fever during and after treatment. It is not able to stop the activation of intravascular coagulation and does not reduce the need for dialysis or the overall mortality.

  10. Investigation of Plasma Treatment on Micro-Injection Moulded Microneedle for Drug Delivery

    Science.gov (United States)

    Nair, Karthik; Whiteside, Benjamin; Grant, Colin; Patel, Rajnikant; Tuinea-Bobe, Cristina; Norris, Keith; Paradkar, Anant

    2015-01-01

    Plasma technology has been widely used to increase the surface energy of the polymer surfaces for many industrial applications; in particular to increase in wettability. The present work was carried out to investigate how surface modification using plasma treatment modifies the surface energy of micro-injection moulded microneedles and its influence on drug delivery. Microneedles of polyether ether ketone and polycarbonate and have been manufactured using micro-injection moulding and samples from each production batch have been subsequently subjected to a range of plasma treatment. These samples were coated with bovine serum albumin to study the protein adsorption on these treated polymer surfaces. Sample surfaces structures, before and after treatment, were studied using atomic force microscope and surface energies have been obtained using contact angle measurement and calculated using the Owens-Wendt theory. Adsorption performance of bovine serum albumin and release kinetics for each sample set was assessed using a Franz diffusion cell. Results indicate that plasma treatment significantly increases the surface energy and roughness of the microneedles resulting in better adsorption and release of BSA. PMID:26529005

  11. Single ultrasound-guided platelet-rich plasma injection for treatment of supraspinatus tendinopathy in dogs

    Science.gov (United States)

    Ho, Louisa K.; Baltzer, Wendy I.; Nemanic, Sarah; Stieger-Vanegas, Susanne M.

    2015-01-01

    The effect of a single platelet-rich plasma injection for supraspinatus tendinopathy was assessed in 10 dogs. Subjective (owner-assessed) improvement in lameness and function were seen in 40% of dogs with improved tendon heterogeneity and echogenicity in 60%. There were no significant changes in gait reaction forces 6 wk after treatment. PMID:26246631

  12. Selective etching of semicrystalline polymers CF4 gas plasma treatment of poly(ethylene)

    NARCIS (Netherlands)

    Olde riekerink, M.B.; Terlingen, J.G.A.; Terlingen, J.G.A.; Engbers, G.H.M.; Feijen, Jan

    1999-01-01

    A series of poly(ethylene) (PE) films with different degrees of crystallinity was treated with a radio-frequency tetrafluoromethane (CF4) gas plasma (48-49 W, 0.06-0.07 mbar, and continuous vs pulsed treatment). The etching behavior and surface chemical and structural changes of the PE films were

  13. Selective Etching of Semicrystalline Polymers: CF4 Gas Plasma Treatment of Poly(ethylene)

    NARCIS (Netherlands)

    Olde Riekerink, M.B.; Terlingen, J.G.A.; Engbers, G.H.M.; Feijen, J.

    1999-01-01

    A series of poly(ethylene) (PE) films with different degrees of crystallinity was treated with a radio-frequency tetrafluoromethane (CF4) gas plasma (48-49 W, 0.06-0.07 mbar, and continuous vs pulsed treatment). The etching behavior and surface chemical and structural changes of the PE films were st

  14. A prospective study of plasma exchange in the treatment of diffuse scleroderma.

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    A prospective randomized study to compare the efficacy between plasma exchange (PE) plus Dpenicillamine (13 cases) (group Ⅰ)and D-penicillamine alone (16 cases) (group Ⅱ) in the treatment of diffuse scleroderma was carried out. Total skin score, the distance between finger and palm the distance between

  15. Conservative Treatment of Ankle Osteoarthritis: Can Platelet-Rich Plasma Effectively Postpone Surgery?

    Science.gov (United States)

    Repetto, Ilaria; Biti, Besmir; Cerruti, Paola; Trentini, Roberto; Felli, Lamberto

    Osteoarthritis is the most common and disabling of the orthopedic diseases. Currently, the conservative treatment of osteoarthritis is limited to symptomatic treatment, whose goal is to improve function and pain control. Ankle osteoarthritis is relatively uncommon, in contrast to osteoarthritis of the hip and knee, and the therapeutic options (both pharmacologic and surgical) are limited, with surgery providing poorer and less predictable results. The effectiveness of platelet-rich plasma injections for osteoarthritis is still controversial, especially so for ankle arthritis, owing to the lack of evidence in the present data. We retrospectively evaluated the mid- to long-term clinical results (mean follow-up of 17.7 months) for platelet-rich plasma injections in 20 patients (20 ankles) with ankle osteoarthritis. We evaluated the presence of pain using the visual analog scale, function using the Foot and Ankle Disability Index, and subjective satisfaction. The pre- and post-treatment scores, obtained from the clinical records and from telephone interviews during the follow-up period, were compared using the Student t test. We found a strong positive effect for 4 platelet-rich plasma injections (injected once a week) on pain (p = .0001) and function (p = .001), with 80% of patients very satisfied and satisfied, and only 2 patients (10%) required surgery because of early treatment failure. These results suggest that the use of platelet-rich plasma injection is a valid and safe alternative to postpone the need for surgery.

  16. Investigation of Plasma Treatment on Micro-Injection Moulded Microneedle for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Karthik Nair

    2015-10-01

    Full Text Available Plasma technology has been widely used to increase the surface energy of the polymer surfaces for many industrial applications; in particular to increase in wettability. The present work was carried out to investigate how surface modification using plasma treatment modifies the surface energy of micro-injection moulded microneedles and its influence on drug delivery. Microneedles of polyether ether ketone and polycarbonate and have been manufactured using micro-injection moulding and samples from each production batch have been subsequently subjected to a range of plasma treatment. These samples were coated with bovine serum albumin to study the protein adsorption on these treated polymer surfaces. Sample surfaces structures, before and after treatment, were studied using atomic force microscope and surface energies have been obtained using contact angle measurement and calculated using the Owens-Wendt theory. Adsorption performance of bovine serum albumin and release kinetics for each sample set was assessed using a Franz diffusion cell. Results indicate that plasma treatment significantly increases the surface energy and roughness of the microneedles resulting in better adsorption and release of BSA.

  17. Surface Modification of Electrospun PVDF/PAN Nanofibrous Layers by Low Vacuum Plasma Treatment

    OpenAIRE

    Fatma Yalcinkaya; Baturalp Yalcinkaya; Adam Pazourek; Jana Mullerova; Martin Stuchlik; Jiri Maryska

    2016-01-01

    Nanofibres are very promising for water remediation due to their high porosity and small pore size. Mechanical properties of nanofibres restrict the application of pressure needed water treatments. Various PAN, PVDF, and PVDF/PAN nanofibre layers were produced, and mechanical properties were improved via a lamination process. Low vacuum plasma treatment was applied for the surface modification of nanofibres. Atmospheric air was used to improve hydrophilicity while sulphur hexafluoride gas was...

  18. Plasma protein fractions in healthy blood donors quantitated by an automated multicapillary electrophoresis system.

    Science.gov (United States)

    Larsson, Anders; Hansson, Lars-Olof

    2006-09-01

    During the last decade, capillary electrophoresis (CE) has emerged as an important alternative to traditional analysis of serum and plasma proteins by agarose or celluloseacetate electrophoresis. CE analysis of plasma proteins can now be fully automated and also includes bar-code identification of samples, preseparation steps, and direct post-separation quantitation of individual peaks, which permits short assay times and high throughput. For laboratory work, it is important to have reference values from healthy individuals. Therefore, plasma samples from 156 healthy blood donors (79 females and 77 males) have been analyzed with the Capillarys instrument and the new high resolution buffer, which yields higher resolution than the beta1-beta2+ buffer. Albumin concentrations in samples are measured using nephelometry in order to assign protein concentrations to each peak. The 2.5 and 97.5 percentiles for both the percentages of different peaks and the protein concentrations in the peaks are calculated according to the recommendations of the International Federation of Clinical Chemistry on the statistical treatment of reference values. The Capillarys instrument is a reliable system for plasma protein analysis, combining advantages of full automation with high analytical performances and throughput.

  19. The effect of plasma pre-treatment on NaHCO{sub 3} desizing of blended sizes on cotton fabrics

    Energy Technology Data Exchange (ETDEWEB)

    Li Xuming [Key Laboratory of Textile Science and Technology, Ministry of Education (China); College of Textiles, Donghua University, Shanghai 201620 (China); College of Textile and Clothing, Shaoxing University, Shaoxing 312000 (China); Qiu Yiping, E-mail: ypqiu@dhu.edu.cn [Key Laboratory of Textile Science and Technology, Ministry of Education (China); College of Textiles, Donghua University, Shanghai 201620 (China)

    2012-03-15

    The influence of the He/O{sub 2} atmospheric pressure plasma jet pre-treatment on subsequent NaHCO{sub 3} desizing of blends of starch phosphate and poly(vinyl alcohol) on cotton fabrics is investigated. Atomic force microscopy and scanning electron microscopy analysis indicate that the surface topography of the samples has significantly changed and the surface roughness increases with an increase in plasma exposure time. X-ray photoelectron spectroscopy analysis shows that a larger number of oxygen-containing polar groups are formed on the sized fabric surface after the plasma treatment. The results of the percent desizing ratio (PDR) indicate that the plasma pretreatment facilitated the blended sizes removal from the cotton fabrics in subsequent NaHCO{sub 3} treatment and the PDR increases with prolonging plasma treatment time. The plasma technology is a promising pretreatment for desizing of blended sizes due to dramatically reduced desizing time.

  20. Experimental beam system studies of plasma-polymer interactions

    Science.gov (United States)

    Nest, Dustin George

    Since the invention of the integrated circuit, the semiconductor industry has relied on the shrinking of device dimensions to increase device performance and decrease manufacturing costs. However, the high degree of roughening observed during plasma etching of current generation photoresist (PR) polymers can result in poor pattern transfer and ultimately decreased device performance or failure. Plasma-surface interactions are inherently difficult to study due to the highly coupled nature of the plasma enviroment. To better understand these interactions, a beam system approach is employed where polymers are exposed to beams of ions and vacuum ultraviolet (VUV) photons. Through the use of the beam system approach, simultaneous VUV radiation, ion bombardment, and moderate substrate heating have been identified as key elements, acting synergistically, as being responsible for roughening of current generation 193 nm PR during plasma processing. Sequential exposure is not adequate for the development of surface roughness, as observed through AFM and SEM. Ion bombardment results in the formation of a graphitized near-surface region with a depth of a few nanometers, the expected ion penetration depth of 150 eV argon ions. In contrast, VUV radiation results in the loss of carbon-oxygen bonds in the bulk PR as observed through Transmission FTIR. Based on the differing penetration depth of either ions or photons, their resulting chemical modifications, and the temperature dependence of the observed roughening, a mechanism is proposed based on stress relaxation resulting in surface buckling. The surface roughness of poly(4-methyl styrene) (P4MS) and poly(alpha-methyl styrene) (PalphaMS) have also been investigated under exposure to ions and VUV photons. PaMS degrades during VUV radiation above its ceiling temperature of ˜60°C. Despite having the same chemical composition as PalphaMS, P4MS does not degrade during VUV exposure at 70°C due to its relatively high ceiling

  1. Effects of O2 plasma treatment of PDMS on the deposition of electrospun PVA nanofibers

    Science.gov (United States)

    Kobayashi, Natsumi; Miki, Norihisa; Hishida, Koichi; Hotta, Atsushi

    2014-03-01

    A new polymeric nanofiber-alignment technique with the selective deposition of the nanofibers using oxygen (O2) plasma treatment on a base material for the electrospinning was introduced. Generally, without any pretreatments, electrospun fibers are deposited randomly on the collector. In this work, we focused on the O2 plasma treatment of the surface of the base material to modify the surface morphology and to add polar groups to the surface. O2 plasma-treated and untreated surface of poly (dimethylsiloxane) (PDMS) was prepared by masking a part of PDMS film by another PDMS film. The polyvinyl alcohol (PVA) fibers were then deposited onto the PDMS film. The surface structure of the PDMS film with PVA nanofibers was analyzed by scanning electron microscopy, water contact angle measurements, and X-ray photon spectroscopy. Only a few PVA nanofibers were deposited randomly on the untreated area of the PDMS film, while a number of PVA nanofibers were selectively deposited onto the O2 plasma-treated area. Intriguingly, PVA nanofibers were neatly aligned along the border of the untreated and the treated areas. The contact angle of the plasma-treated surface of PDMS decreased from 105 to 22 degree and the atomic ratio of O/Si was 1.7 times higher than that of the untreated PDMS.

  2. Overview on the power supply systems for plasma instabilities control

    Energy Technology Data Exchange (ETDEWEB)

    Toigo, V., E-mail: vanni.toigo@igi.cnr.it [Consorzio RFX - EURATOM - ENEA Association, C.so Stati Uniti 4, 35127 Padova (Italy); Gaio, E.; Piovan, R.; Barp, M.; Bigi, M.; Ferro, A.; Finotti, C.; Novello, L.; Recchia, M.; Zamengo, A.; Zanotto, L. [Consorzio RFX - EURATOM - ENEA Association, C.so Stati Uniti 4, 35127 Padova (Italy)

    2011-10-15

    The paper presents an overview on the power supply (PS) systems for plasma instabilities control in fusion experiments, based on active control coils. First, the MHD instabilities and the approach to their control in Tokamaks and Reversed Field Pinches (RFPs) are described. Then, the features of MHD modes controls presently used in fusion experiments are reviewed. For the control systems based on active coils fed by fast power supplies, the typical requirements in terms of power, dynamics, accuracy and delay are summarized and discussed. Then, a survey on the technology available to design these types of PSs is given, together with the most suitable circuit topologies and guidelines for the design, on the basis of solutions adopted in existing experiments.

  3. Interferon-α treatment in systemic mastocytosis

    DEFF Research Database (Denmark)

    Bjerrum, Ole Weis

    2011-01-01

    classification need treatment. This review on interferon treatment in systemic mastocytosis documents an effect of this biological agent in some patients with mastocytosis. However, the place of interferon-α, as mono- or combination therapy, in the treatment algorithm may only be definitely established...

  4. Interferon-α treatment in systemic mastocytosis

    DEFF Research Database (Denmark)

    Bjerrum, Ole Weis

    2011-01-01

    classification need treatment. This review on interferon treatment in systemic mastocytosis documents an effect of this biological agent in some patients with mastocytosis. However, the place of interferon-a, as mono- or combination therapy, in the treatment algorithm may only be definitely established...

  5. INFLUENCE OF INTRAMUSCULAR APPLICATION OF AUTOLOGOUS CONDITIONED PLASMA ON SYSTEMIC CIRCULATING IGF-1

    Directory of Open Access Journals (Sweden)

    Gert Schippinger

    2011-09-01

    Full Text Available Platelet-rich plasma (PRP to increase levels of platelets and growth factors has been used for the treatment of sports injuries suggesting to improve healing and regeneration. This method offers some potential especially for elite athletes. However, the insulin like growth factor-1 (IGF-1 is prohibited by the World Anti Doping Agency and, in addition, there may be a possible link between increased levels of IGF-1 and cancer risk. Aim of the study was to evaluate a systemic increase of IGF-1 after local intramuscular administration of PRP in young healthy moderately trained male subjects. Blood samples were drawn and PRP preparation was performed by means of centrifugation. Enriched plasma was injected into the gluteus muscle. Venous blood was collected and serum prepared before as well as after 0.5, 3 and 24 hours after PRP administration. IGF-1 analysis was performed applying an ELISA test kit. No significant systemic increase of mean IGF-1 was found after the PRP injection. Only one subject showed an increase after 24 h, but all IGF-1 values were found within reference limits. We conclude that a single intramuscular application of PRP does not significantly increase systemic IGF-1 levels. Therefore, a single application of PRP is safe with respect to systemic IGF-1 response and cancer risk and this should be allowed for treatment of muscle injuries in elite athletes

  6. Red wine activates plasma membrane redox system in human erythrocytes.

    Science.gov (United States)

    Tedesco, Idolo; Moccia, Stefania; Volpe, Silvestro; Alfieri, Giovanna; Strollo, Daniela; Bilotto, Stefania; Spagnuolo, Carmela; Di Renzo, Massimo; Aquino, Rita P; Russo, Gian Luigi

    2016-01-01

    In the present study, we report that polyphenols present in red wine obtained by a controlled microvinification process are able to protect human erythrocytes from oxidative stress and to activate Plasma Membrane Redox System (PMRS). Human plasma obtained from healthy subjects was incubated in the presence of whole red wine at a concentration corresponding to 9.13-73 μg/ml gallic acid equivalents to verify the capacity to protect against hypochlorous acid (HOCl)-induced plasma oxidation and to minimize chloramine formation. Red wine reduced hemolysis and chloramine formation induced by HOCl of 40 and 35%, respectively. PMRS present on human erythrocytes transfers electrons from intracellular molecules to extracellular electron acceptors. We demonstrated that whole red wine activated PMRS activity in human erythrocytes isolated from donors in a dose-dependent manner with a maximum at about 70-100 μg/ml gallic acid equivalents. We also showed that red wine increased glutathione (GSH) levels and erythrocytic antioxidant capacity, measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH) quenching assay. Furthermore, we reported that GSH played a crucial role in regulating PMRS activity in erythrocytes. In fact, the effect of iodoacetamide, an alkylating agent that induces depletion of intracellular GSH, was completely counteracted by red wine. Bioactive compounds present in red wine, such as gallic acid, resveratrol, catechin, and quercetin were unable to activate PMRS when tested at the concentrations normally present in aged red wines. On the contrary, the increase of PMRS activity was associated with the anthocyanin fraction, suggesting the capacity of this class of compounds to positively modulate PMRS enzymatic activity.

  7. Support Systems for Treatment Integrity

    NARCIS (Netherlands)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately

  8. Support Systems for Treatment Integrity

    NARCIS (Netherlands)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    2016-01-01

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately

  9. Support Systems for Treatment Integrity

    NARCIS (Netherlands)

    Goense, Pauline Brigitta; Boendermaker, Leonieke; van Yperen, Tom

    2016-01-01

    Objective: This systematic review evaluates the content of effective support provided to practitioners of evidence-based interventions in order to establish and maintain treatment integrity. Method: Four articles covering six outcome studies are included in this review, these studies (1) adequately

  10. Electromagnetic radiation and nonlinear energy flow in an electron beam-plasma system

    Science.gov (United States)

    Whelan, D. A.; Stenzel, R. L.

    1985-01-01

    It is shown that the unstable electron-plasma waves of a beam-plasma system can generate electromagnetic radiation in a uniform plasma. The generation mechanism is a scattering of the unstable electron plasma waves off ion-acoustic waves, producing electromagnetic waves whose frequency is near the local plasma frequency. The wave vector and frequency matching conditions of the three-wave mode coupling are experimentally verified. The electromagnetic radiation is observed to be polarized with the electric field parallel to the beam direction, and its source region is shown to be localized to the unstable plasma wave region. The frequency spectrum shows negligible intensity near the second harmonic of the plasma frequency. These results suggest that the observed electromagnetic radiation of type III solar bursts may be generated near the local plasma frequency and observed downstream where the wave frequency is near the harmonic of the plasma frequency.

  11. Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers prepared by atmospheric plasma treatment and electrospinning

    Science.gov (United States)

    Durable antibacterial Ag/polyacrylonitrile (Ag/PAN) hybrid nanofibers were prepared by atmospheric plasma treatment and electrospinning. Atmospheric helium plasma treatment was first used to reduce the silver nitrate precursor in pre-electrospinning solutions into metallic silver nanoparticles, foll...

  12. Plasma gasification of refuse derived fuel in a single-stage system using different gasifying agents.

    Science.gov (United States)

    Agon, N; Hrabovský, M; Chumak, O; Hlína, M; Kopecký, V; Masláni, A; Bosmans, A; Helsen, L; Skoblja, S; Van Oost, G; Vierendeels, J

    2016-01-01

    The renewable evolution in the energy industry and the depletion of natural resources are putting pressure on the waste industry to shift towards flexible treatment technologies with efficient materials and/or energy recovery. In this context, a thermochemical conversion method of recent interest is plasma gasification, which is capable of producing syngas from a wide variety of waste streams. The produced syngas can be valorized for both energetic (heat and/or electricity) and chemical (ammonia, hydrogen or liquid hydrocarbons) end-purposes. This paper evaluates the performance of experiments on a single-stage plasma gasification system for the treatment of refuse-derived fuel (RDF) from excavated waste. A comparative analysis of the syngas characteristics and process yields was done for seven cases with different types of gasifying agents (CO2+O2, H2O, CO2+H2O and O2+H2O). The syngas compositions were compared to the thermodynamic equilibrium compositions and the performance of the single-stage plasma gasification of RDF was compared to that of similar experiments with biomass and to the performance of a two-stage plasma gasification process with RDF. The temperature range of the experiment was from 1400 to 1600 K and for all cases, a medium calorific value syngas was produced with lower heating values up to 10.9 MJ/Nm(3), low levels of tar, high levels of CO and H2 and which composition was in good agreement to the equilibrium composition. The carbon conversion efficiency ranged from 80% to 100% and maximum cold gas efficiency and mechanical gasification efficiency of respectively 56% and 95%, were registered. Overall, the treatment of RDF proved to be less performant than that of biomass in the same system. Compared to a two-stage plasma gasification system, the produced syngas from the single-stage reactor showed more favourable characteristics, while the recovery of the solid residue as a vitrified slag is an advantage of the two-stage set-up.

  13. Rapid Hydrophilization of Model Polyurethane/Urea (PURPEG) Polymer Scaffolds Using Oxygen Plasma Treatment

    OpenAIRE

    Rok Zaplotnik; Alenka Vesel; Gregor Primc; Xiangyu Liu; Chen, Kevin C; Chiju Wei; Kaitian Xu; Miran Mozetic

    2016-01-01

    Polyurethane/urea copolymers based on poly(ethylene glycol) (PURPEG) were exposed to weakly ionized, highly reactive low-pressure oxygen plasma to improve their sorption kinetics. The plasma was sustained with an inductively coupled radiofrequency generator operating at various power levels in either E-mode (up to the forward power of 300 W) or H-mode (above 500 W). The treatments that used H-mode caused nearly instant thermal degradation of the polymer samples. The density of the charged par...

  14. Practical plasma immersion ion implantation for stress regulation and treatment of insulators

    Energy Technology Data Exchange (ETDEWEB)

    Bilek, M.M.M.; McKenzie, D.R.; Tarrant, R.N.; Oates, T.W.H.; Ruch, P.; Newton-McGee, K.; Shi, Yang; Tompsett, D.; Nguyen, H.C.; Gan, B.K.; Kwok, D.T. [School of Physics, University of Sydney, NSW (Australia)

    2004-07-01

    Plasma immersion ion implantation has been attracting the interest of research groups around the world over the last two decades. The technique has been developed to the stage where it is a well-established technique for a number of materials processing applications, such as plasma nitriding. Recent research has focussed on developing the method for a range of new applications, including stress regulation and control of microstructure, as well as surface treatment of insulators. Recent developments in these technologically important applications are discussed in this paper. (copyright 2004 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. Plasma treatment of multiwall carbon nanotubes for dispersion improvement in water

    Science.gov (United States)

    Chen, Changlun; Ogino, Akihisa; Wang, Xiangke; Nagatsu, Masaaki

    2010-03-01

    Microwave excited Ar/H2O surface-wave plasma was used to treat multiwall carbon nanotubes (MWCNTs) to modify their surface characteristics and thus improve their dispersion capability in water. Changes in the atom composition and structure properties of MWCNTs were analyzed using x-ray photoelectron spectroscopy and Raman spectroscopy, and the surface morphology of MWCNTs was observed by field emission scanning electron microscopy and scanning transmission electron microscopy. The results indicated that Ar/H2O plasma treatment greatly enhanced the content of oxygen, and modified surface microstructure properties. The integrity of nanotube patterns, however, was not damaged.

  16. PECULIAR FEATURES OF ELECTROLYTIC-PLASMA HEATING DURING ELECTROCHEMICAL HEAT-TREATMENT OF STEEL

    Directory of Open Access Journals (Sweden)

    Yu. Alekseev

    2013-01-01

    Full Text Available Thermo-physical peculiar features of  anode electrolytic-plasma heating applied for heat and chemical heat-treatment have been investigated in the paper. The paper presents  results of the investigations pertaining  to influence of the operating voltage on current density, temperature and heating rate, heating power and  changes in heat portion passing to the anode. Peculiar features of layer formation which are hardened  by electrolytic-plasma carburizing  have been presented in the paper.

  17. Momentum, Heat, and Neutral Mass Transport in Convective Atmospheric Pressure Plasma-Liquid Systems and Implications for Aqueous Targets

    CERN Document Server

    Lindsay, Alexander; Slikboer, Elmar; Shannon, Steven; Graves, David

    2015-01-01

    There is a growing interest in the study of plasma-liquid interactions with application to biomedicine, chemical disinfection, agriculture, and other fields. This work models the momentum, heat, and neutral species mass transfer between gas and aqueous phases in the context of a streamer discharge; the qualitative conclusions are generally applicable to plasma-liquid systems. The problem domain is discretized using the finite element method. The most interesting and relevant model result for application purposes is the steep gradients in reactive species at the interface. At the center of where the reactive gas stream impinges on the water surface, the aqueous concentrations of OH and ONOOH decrease by roughly 9 and 4 orders of magnitude respectively within 50 $\\mu$m of the interface. Recognizing the limited penetration of reactive plasma species into the aqueous phase is critical to discussions about the therapeutic mechanisms for direct plasma treatment of biological solutions. Other interesting results fro...

  18. The effects of low-temperature plasma treatment on the capillary properties of inorganic fibers

    Science.gov (United States)

    Garifullin, A. R.; Abdullin, I. Sh; Skidchenko, E. A.; Krasina, I. V.; Shaekhov, M. F.

    2016-01-01

    Solving the problem of achieving high adhesion between the components in the polymeric composite material (PCM) based on carbon fibers (CF) and basalt fibers (BF) is proposed to use the radio-frequency (RF) plasma under lower pressure by virtue of efficiency, environmental friendliness and rationality of the method. The paper gives the results of studies of the properties of CF and BF after RF capacitive discharge plasma treatment. The plasma modification modes of carbon and basalt fiber were investigated. The efficiency of treatment tool in surface properties modification of carbon and basalt fibers was found, namely capillary properties of CF and BF were researched. The optimal treatment modes were selected. It was found that the method of plasma modification in the radio-frequency capacitive discharge under the lower pressure contributes enhancing the capillary properties of inorganic fibers, in particular carbon and basalt ones. It shows the tendency to increase of the adhesive properties in PCM, and, consequently, the increase of the physical and mechanical properties of the products.

  19. Degradation of pharmaceutical compounds in water by non-thermal plasma treatment.

    Science.gov (United States)

    Magureanu, Monica; Mandache, Nicolae Bogdan; Parvulescu, Vasile I

    2015-09-15

    Pharmaceutical compounds became an important class of water pollutants due to their increasing consumption over the last years, as well as due to their persistence in the environment. Since conventional waste water treatment plants are unable to remove certain non-biodegradable pharmaceuticals, advanced oxidation processes was extensively studied for this purpose. Among them, non-thermal plasma was also recently investigated and promising results were obtained. This work reviews the recent research on the oxidative degradation of pharmaceuticals using non-thermal plasma in contact with liquid. As target compounds, several drugs belonging to different therapeutic groups were selected: antibiotics, anticonvulsants, anxiolytics, lipid regulators, vasodilatators, contrast media, antihypertensives and analgesics. It was found that these compounds were removed from water relatively fast, partly degraded, and partly even mineralized. In order to ensure the effluent is environmentally safe it is important to identify the degradation intermediates and to follow their evolution during treatment, which requires complex chemical analysis of the solutions. Based on this analysis, degradation pathways of the investigated pharmaceuticals under plasma conditions were suggested. After sufficient plasma treatment the final organic by-products present in the solutions were mainly small molecules in an advanced oxidation state. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Plasma treatment of paper for protein immobilization on paper-based chemiluminescence immunodevice.

    Science.gov (United States)

    Zhao, Mei; Li, Huifang; Liu, Wei; Guo, Yumei; Chu, Weiru

    2016-05-15

    A novel protein immobilization method based on plasma treatment of paper on the low-cost paper-based immunodevice was established in this work. By using a benchtop plasma cleaner, the paper microzone was treated by oxygen plasma treatment for 4 min and then the antibody can be directly immobilized on the paper surface. Aldehyde group was produced after the plasma treatment, which can be verified from the fourier transform infrared spectroscopy (FT-IR) spectra and x-ray photoelectron spectroscopy (XPS) spectra. By linked to aldehyde group, the antibody can be immobilized on the paper surface without any other pretreatment. A paper-based immunodevice was introduced here through this antibody immobilization method. With sandwich chemiluminescence (CL) immunoassay method, the paper-based immunodevice was successfully performed for carcinoembryonic antigen (CEA) detection in human serum with a linear range of 0.1-80.0 ng/mL. The detection limit was 0.03 ng/mL, which was 30 times lower than the clinical CEA level. Comparing to the other protein immobilization methods on paper-based device, this strategy was faster and simpler and had potential applications in point-of-care testing, public health and environmental monitoring.

  1. Rapid Hydrophilization of Model Polyurethane/Urea (PURPEG Polymer Scaffolds Using Oxygen Plasma Treatment

    Directory of Open Access Journals (Sweden)

    Rok Zaplotnik

    2016-04-01

    Full Text Available Polyurethane/urea copolymers based on poly(ethylene glycol (PURPEG were exposed to weakly ionized, highly reactive low-pressure oxygen plasma to improve their sorption kinetics. The plasma was sustained with an inductively coupled radiofrequency generator operating at various power levels in either E-mode (up to the forward power of 300 W or H-mode (above 500 W. The treatments that used H-mode caused nearly instant thermal degradation of the polymer samples. The density of the charged particles in E-mode was on the order of 1016 m−3, which prevented material destruction upon plasma treatment, but the density of neutral O-atoms in the ground state was on the order of 1021 m−3. The evolution of plasma characteristics during sample treatment in E-mode was determined by optical emission spectroscopy; surface modifications were determined by water adsorption kinetics and X-ray photoelectron spectroscopy; and etching intensity was determined by residual gas analysis. The results showed moderate surface functionalization with hydroxyl and carboxyl/ester groups, weak etching at a rate of several nm/s, rather slow activation down to a water contact angle of 30° and an ability to rapidly absorb water.

  2. Investigations into the Anti-Felting Properties of Sputtered Wool Using Plasma Treatment

    Science.gov (United States)

    M. Borghei, S.; Shahidi, S.; Ghoranneviss, M.; Abdolahi, Z.

    2013-01-01

    In this research the effects of mordant and plasma sputtering treatments on the crystallinity and morphological properties of wool fabrics were investigated. The felting behavior of the treated samples was also studied. We used madder as a natural dye and copper sulfate as a metal mordant. We also used copper as the electrode material in a DC magnetron plasma sputtering device. The anti-felting properties of the wool samples before and after dying was studied, and it was shown that the shrink resistance and anti-felting behavior of the wool had been significantly improved by the plasma sputtering treatment. In addition, the percentage of crystallinity and the size of the crystals were investigated using an X-ray diffractometer, and a scanning electron microscope was used for morphological analysis. The amount of copper particles on the surface of the mordanted and sputtered fabrics was studied using the energy dispersive X-ray (EDX) method, and the hydrophobic properties of the samples were examined using the water drop test. The results show that with plasma sputtering treatment, the hydrophobic properties of the surface of wool become super hydrophobic.

  3. Glutamine treatment decreases plasma and lymph cytotoxicity during sepsis in rats

    Institute of Scientific and Technical Information of China (English)

    Xuemin Wang; Ying Xue; Menfan Liang; Wei Jiang

    2012-01-01

    Glutamine (Gin) is considered as a conditionally essential amino acid.Pharmacological supplementation of Gln helps to maintain the intestinal mucosal barrier,modulate cytokine production,and prevent organ injury during sepsis.Our previous study demonstrated the different effects of Gln on macrophage cytokine production in vitro or in vivo.The purpose of this study was to investigate the potential mechanism of Gln treatment to protect cells and modulate inflammation during sepsis in vivo.The results showed that administration of Gln significantly attenuated plasma-induced macrophage cytokine production and endothelial cell necrosis after cecal ligation and puncture in rats.In addition,it preserved human umbilical vein endothelial cell (HUVEC) viability and migration ability. Gln treatment also reduced lymph cytotoxicity by restoring macrophage tumor necrosis factor-α production, maintainingHUVEC viability,and decreasing endothelial cell necrosis.Mesenteric lymph duct ligation did not alleviate plasma cytotoxicity. Plasma lipopolysaccharide and D-lactate levels were suppressed after Gln treatment.Taken together,these results indicated that Gin administration can protect cells by attenuating the cytotoxicity of plasma and mesenteric lymph during sepsis.

  4. Monitoring of low pressure plasma systems; Ueberwachung von Niederdruck-Plasmaanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Michaeli, W.; Hegenbart, A.; Binkowski, D.; Fragstein, F. v. [Inst. fuer Kunststoffverarbeitung (IKV) an der RWTH Aachen (Germany)

    2007-02-15

    The optical emission spectroscopy (OES) is a very flexible and easy to use method to monitor industrial plasma processes. By directly monitoring the plasma itself many additional factors influencing low pressure plasma processes can be observed. First of all factors that can not be controlled directly play an important role in this context. Examples are contaminations and leaks in the plasma system. These can negatively influence the reproducibility of production processes. In this paper the effect of a leak on the coating and the plasma process is being shown. Additionally the detection of contaminations and sealing problems in a microwave plasma source is being demonstrated. By using the correlations being presented the OES can be used to continually monitor low pressure plasma systems and thus enhance reproducibility of industrial low pressure plasma processes. (orig.)

  5. Spectroscopic and antimicrobial studies of polystyrene films under air plasma and He-Ne laser treatment

    Indian Academy of Sciences (India)

    S M Pawde; Sanmesh S Parab

    2008-05-01

    Polystyrene (PS) films are used in packaging and biomedical applications because of their transparency and good environmental properties. The present investigation is centered on the antifungal and antibacterial activities involved in the film surface. Subsequently, microbial formations were immobilized on the modified PS films. Living microorganisms such as bacteria and yeast were used. Untreated PS films show very fast rate of growth of bacteria within few hours. The study involves developments of polymer surfaces with bacterial growth and further studies after giving antibacterial treatment such as plasma treatment. Major emphasis has been given to study the effect of various parameters which can affect the performance of the improved material. Films were prepared by two methods: plasma treatment under vacuum and under ongoing He-Ne laser source. The parameters such as (1) surface area by contact angle measurements, (2) quality of material before and after treatment by SEM and FTIR spectra and (3) material characterization by UV-vis spectra were studied. It was observed that plasma treatment of

  6. Effects of plasma treatment time on modification of acrylic denture material

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Objective:To study the relationship between plasma treatment time and efficacy. Methods:Test specimens were prepared from an acrylic resin denture material in the size of 2 mm × 10 mm × 10 mm. Plasma treatment was carried out on the surface of Polymethyl methacrylate(PMMA) at different time. XPS studies, IR spectra studies and measurement of wetting angle were performed. Results: XPS showed the peak corresponding to C-O getting higher as the treatment proceeded, however at 120 seconds, the peak did not increase any longer and partly crossed with the peak at the duration of 60 seconds. IR spectra showed the wave corresponding to C-H was reduced as O2-plasma treatment proceeded, and then changed little. Wetting angle initially decreased dramatically, however, as the reaction proceeded, wetting angle increased slightly. Conclusion:Equilibrium was reached for introducing oxygen-containing groups and changing of C-H. As the treatment proceeded, wetting angle increased slightly.

  7. HL-2A Tokamak Plasma Visible Light Imaging System

    Institute of Scientific and Technical Information of China (English)

    ZHENGYinjia; FENGZhen; LUOCuiwen; CHENGLiaoyuan

    2003-01-01

    Visible imagery is extremely useful to overview the edge and divertor structure. The plasma configuration and the position of the strike lines on the target plates can be also observed by imaging technique. By imaging the edge or core plasma with visible emission in the desired wavelength band, usually with a “tangential” view, the plasma position can be determined in principle.

  8. ELECTROLYTE-PLASMA TREATMENT UNDER NON-STATIONARY MODE IN A HIGH-GRADIENT ELECTRIC FIELD

    Directory of Open Access Journals (Sweden)

    Yu. G. Aliakseyeu

    2017-01-01

    Full Text Available Electrolyte-plasma treatment has become widespread in the industry as an alternative to traditional chemical, electrochemical and mechanical methods of improving the surface quality of products made of metallic materials. Advantages ofelectrolyte-plasma treatment are a high intensity of microroughness smoothing, the use of low concentration salts solutions as electrolytes, the possibility of processing products of complex shape. The main disadvantage of this method is high power consumption, so the method can be considered in its classical form to the power-consuming. A possible way of reducing power consumption is treatment in unsteady modes that arise in the transition zone between a switching and stable electrolyte-plasma treatment process and is characterized by the periodic formation of a stable vapor-gas shell and a transition to an electrochemical process. The paper presents the results of a study of the influence of a high-gradient electric field under unsteady electrolyte-plasma treatment modes on the energy parameters of the process and the characteristics of the surface being treated. It is established that a high-gradient electric field has a significant effect on the decrease in specific power consumption, which is explained by a decrease in losses in the electrolyte and the influence of the field on the formation and maintenance of the vapor-gas shell. As a result of the study of the effect of a high-gradient electric field in unsteady EPT modes on characteristics of the surface layer was established that a significant impulse current density in the zone of predominantly electrochemical treatment leads to a selective etching of the surface and the formation of a characteristic micro relief of the surface with a developed porous microstructure with pore sizes from 0.3 to 2.5 microns. The most pronounced porous microstructure is provided at a voltage of 270–300 V and an additional inductance of 3.2 mH.

  9. A brief review of dusty plasma effects in the solar system

    Energy Technology Data Exchange (ETDEWEB)

    Winske, D.

    1997-08-01

    Dusty plasmas are commonly found in the solar system and in the rest of space. In this paper we briefly describe some of the more common dusty plasmas: the rings of Saturn, dust tails of comets, dust streams from Jupiter, and noctilucent clouds in the upper atmosphere. We also discuss some of the theoretical issues related to grain charging, dust particle dynamics, waves in dusty plasmas, and dusty plasma crystals.

  10. An improved approximation for the analytical treatment of the local linear gyro-kinetic plasma dispersion relation in toroidal geometry

    Science.gov (United States)

    Migliano, P.; Zarzoso, D.; Artola, F. J.; Camenen, Y.; Garbet, X.

    2017-09-01

    The analytical treatment of plasma kinetic linear instabilities in toroidal geometry is commonly tackled employing a power series expansion of the resonant part of the dispersion relation. This expansion is valid under the assumption that the modulus of the mode frequency is smaller than the magnitude of the frequencies characterising the system (the drift, bounce and transit frequencies for example). We will refer to this approximation as high frequency approximation (HFA). In this paper the linear plasma dispersion relation is derived in the framework of the gyro-kinetic model, for the electrostatic case, in the local limit, in the absence of collisions, for a non rotating plasma, considering adiabatic electrons, in toroidal circular geometry, neglecting the parallel dynamics effect. A systematic analysis of the meaning and limitations of the HFA is performed. As already known, the HFA is not valid for tokamak relevant parameters. A new way to approximate the resonant part of the dispersion relation, called here Improved high frequency approximation (IHFA), is therefore proposed. A quantitative analysis of the ion temperature gradient (ITG) instability is presented. The IHFA is shown to be applicable to the treatment of the ITG instability in tokamaks.

  11. Comparison of the effects of short-term hypolipidaemic treatment on plasma adipokine levels in men and women with isolated hypercholesterolaemia.

    Science.gov (United States)

    Krysiak, Robert; Żmuda, Witold; Marek, Bogdan; Okopień, Bogusław

    2015-01-01

    Hypolipidaemic agents were found to affect plasma adipokine levels, but no previous study has investigated whether this effect is sex-dependent. We retrospectively analysed 61 patients participating in our previous studies, who because of isolated hypercholesterolaemia were treated with simvastatin (40 mg daily), ezetimibe (10 mg daily) or simvastatin (40 mg daily) plus ezetimibe (10 mg daily). Plasma levels of leptin, adiponectin, visfatin, tumour necrosis factor-alpha (TNF-alpha), free fatty acids (FFA), and high-sensitivity C-reactive protein (hsCRP) were assessed separately for men and women before and after 30 days of treatment. At baseline, plasma levels of adiponectin and leptin were lower, while plasma levels of TNF-alpha were higher in men than in women. Administration of simvastatin and statin/ezetimibe combination for 30 days reduced plasma levels of hsCRP, FFA, leptin, visfatin, and TNF-alpha but increased plasma levels of adiponectin, while the effect of ezetimibe was much more limited. The effect of simvastatin and ezetimibe, administered alone or in combination, on plasma hsCRP, FFA, leptin, adiponectin, visfatin, and TNF-alpha did not differ between men and women. Irrespectively of sex, the changes in plasma adipokines and systemic-anti-inflammatory effects were more expressed in simvastatin - than in ezetimibe-treated patients and were strongest when both these agents were administered together. Our results show that sex differences do not determine the effect of hypolipidaemic agents on adipose tissue and low-grade inflammation.

  12. A Mechanistic study of Plasma Treatment Effects on Demineralized Dentin Surfaces for Improved Adhesive/Dentin Interface Bonding

    Science.gov (United States)

    Dong, Xiaoqing; Chen, Meng; Wang, Yong; Yu, Qingsong

    2014-01-01

    Our previous work has shown that non-thermal plasma treatment of demineralized dentin significantly (p<0.05) improved adhesive/dentin bonding strength for dental composite restoration as compared with the untreated controls. This study is to achieve mechanistic understanding of the plasma treatment effects on dentin surface through investigating the plasma treated dentin surfaces and their interaction with adhesive monomer, 2-Hydroxyethyl methacrylate (HEMA). The plasma treated dentin surfaces from human third molars were evaluated by water contact angle measurements and scanning electron microscopy (SEM). It was found that plasma-treated dentin surface with subsequent HEMA immersion (Plasma/HEMA Treated) had much lower water contact angle compared with only plasma-treated (Plasma Treated) or only HEMA immersed (HEMA Treated) dentin surfaces. With prolong water droplet deposition time, water droplets spread out completely on the Plasma/HEMA Treated dentin surfaces. SEM images of Plasma/HEMA Treated dentin surfaces verified that dentin tubules were opened-up and filled with HEMA monomers. Extracted type I collagen fibrils, which was used as simulation of the exposed dentinal collagen fibrils after acid etching step, were plasma treated and analyzed with Fourier transform infrared spectroscopy (FT-IR) and circular dichroism (CD) spectra. FT-IR spectra of the Plasma/HEMA Treated collage fibrils showed broadened amide I peak at 1660 cm−1 and amide II at 1550 cm−1, which indicate secondary structure changes of the collagen fibrils. CD spectra indicated that 67.4% collagen helix structures were denatured after plasma treatment. These experimental results demonstrate that non-thermal argon plasma treatment was very effective in loosing collagen structure and enhancing adhesive monomer penetration, which are beneficial to thicker hybrid layer and longer resin tag formation, and consequently enhance adhesive/dentin interface bonding. PMID:25267936

  13. Adhesion improvement of fibres by continuous plasma treatment at atmospheric pressure

    Energy Technology Data Exchange (ETDEWEB)

    Kusano, Y.; Andersen, Tom L.; Soerensen, B.F.; Toftegaard, H.L.; Teodoru, S. [Technical Univ. of Denmark. DTU Wind Energy, Risoe Campus, Roskilde (Denmark); Hansen, Charles M. [Hoersholm (Denmark)

    2013-09-01

    Carbon fibres and ultra-high-molecular-weight polyethylene (UHMWPE) fibres were continuously treated by a dielectric barrier discharge plasma at atmospheric pressure for adhesion improvement with epoxy resins. The plasma treatment improved wettability, increased the oxygen containing polar functional groups at the surface, and subsequently improved adhesion to the epoxy and fracture resistance of epoxy composites. Hansen solubility parameters (HSP), quantitatively describing physical interactions among molecules, were measured for the UHMWPE fibre surfaces. The result identifies two distinct types of surfaces in both the plasma treated and the untreated fibres. One type is typical of polyethylene polymers while the other is characteristic of the oxygenated surface at much higher values of HSP. (Author)

  14. Surface adhesive properties of continuous PBO fiber after air-plasma-grafting-epoxy treatment

    Institute of Scientific and Technical Information of China (English)

    贾彩霞; 王乾; 陈平; 蒲永伟

    2016-01-01

    It was found that air dielectric barrier discharge (DBD) plasma contributed to the grafting of epoxy resin onto continuous PBO fiber surface. This air-plasma-grafting-epoxy method yielded a noticeable enhancement in the interfacial adhesion between PBO fiber and thermoplastic matrix resin, with the interlaminar shear strength of the resulting composites increased by 66.7%. DSC and FTIR analyses were then used to study the curing behavior of epoxy coating on PBO fiber surface, deduce the possible grafting reactions and investigate the grafting mechanism. More importantly, TGA measurement showed that the grafting of epoxy onto PBO fiber had almost no effect on the composite heat resistance, and there was more thermoplastic matrix resin adhering to the fiber surface; the latter could also be clearly found in the SEM photos. Thereby, the air-plasma-grafting-epoxy treatment was proved to be an effective method for the improvement of continuous PBO fiber surface adhesive properties.

  15. Surface treatment of 0Cr19Ni9 stainless steel SMAW joint by plasma melting

    Institute of Scientific and Technical Information of China (English)

    罗伟; 栾景飞; 严密

    2002-01-01

    Micro-plasma are surface melting of 0Crl9Ni9 shielded metal are welding joint with a micro-plasma are welder produced a thin surface melted layer with a refined microtructure. The surface treatment changed the anodie polarization behavior in 0.5 mol/L H2SO4 solution. The polarization tests showed that for the as-welded joint both the heat-affected zone and the weld metal decreased in resis-tance to corrosion compared with the as-received parent material while for the micro-plasma are surface melted joint the corrosion resistance increased significantly. This increase in corrosion resistance is attributed to the rapid solidification of the melted layer. Rapid solidification of the melted layer refines its mierostrueture, decreases its mierosegregation, and inhibits the precipitation of chromium carbides at the grain boundaries.

  16. Pattern phenomena in an rf discharge dusty plasma system

    Institute of Scientific and Technical Information of China (English)

    HUANG Feng; YE Maofu; WANG Long

    2006-01-01

    Various dust patterns are observed in an rf discharge dusty plasma system.According to the dust growth process from small to large in size, the formation of different dust patterns can be divided into two stages: the small-particle stage (or dust cloud stage),and the large-particle stage (or dust crystal stage). The evolution relations between different dust patterns with gas pressure changing are investigated. Dust voids, dust acoustic waves and strong turbulence modes are presented at the small-particle stage. The self-organized dust lattices and dust clusters are investigated at the large-particle stage.The static structure of a dust lattice is characterized by means of the pair correlation function. Dust clusters formed by particles with different numbers and the regular evolution of the clusters with gas pressure are also investigated. The packing sequences of dust clusters are verified through two-dimensional confined molecular dynamics simulations.

  17. Infantile Refsum Disease: Influence of Dietary Treatment on Plasma Phytanic Acid Levels.

    Science.gov (United States)

    Sá, Maria João Nabais; Rocha, Júlio C; Almeida, Manuela F; Carmona, Carla; Martins, Esmeralda; Miranda, Vasco; Coutinho, Miguel; Ferreira, Rita; Pacheco, Sara; Laranjeira, Francisco; Ribeiro, Isaura; Fortuna, Ana Maria; Lacerda, Lúcia

    2016-01-01

    Infantile Refsum disease (IRD) is one of the less severe of Zellweger spectrum disorders (ZSDs), a group of peroxisomal biogenesis disorders resulting from a generalized peroxisomal function impairment. Increased plasma levels of very long chain fatty acids (VLCFA) and phytanic acid are biomarkers used in IRD diagnosis. Furthermore, an increased plasma level of phytanic acid is known to be associated with neurologic damage. Treatment of IRD is symptomatic and multidisciplinary.The authors report a 3-year-old child, born from consanguineous parents, who presented with developmental delay, retinitis pigmentosa, sensorineural deafness and craniofacial dysmorphisms. While the relative level of plasma C26:0 was slightly increased, other VLCFA were normal. Thus, a detailed characterization of the phenotype was essential to point to a ZSD. Repeatedly increased levels of plasma VLCFA, along with phytanic acid and pristanic acid, deficient dihydroxyacetone phosphate acyltransferase activity in fibroblasts and identification of the homozygous pathogenic mutation c.2528G>A (p.Gly843Asp) in the PEX1 gene, confirmed this diagnosis. Nutritional advice and follow-up was proposed aiming phytanic acid dietary intake reduction. During dietary treatment, plasma levels of phytanic acid decreased to normal, and the patient's development evaluation showed slow progressive acquisition of new competences.This case report highlights the relevance of considering a ZSD in any child with developmental delay who manifests hearing and visual impairment and of performing a systematic biochemical investigation, when plasma VLCFA are mildly increased. During dietary intervention, a biochemical improvement was observed, and the long-term clinical effect of this approach needs to be evaluated.

  18. Preparation of chitosan-coated polyethylene packaging films by DBD plasma treatment.

    Science.gov (United States)

    Theapsak, Siriporn; Watthanaphanit, Anyarat; Rujiravanit, Ratana

    2012-05-01

    Polyethylene (PE) packaging films were coated with chitosan in order to introduce the antibacterial activity to the films. To augment the interaction between the two polymers, we modified the surfaces of the PE films by dielectric barrier discharge (DBD) plasma before chitosan coating. After that the plasma-treated PE films were immersed in chitosan acetate solutions with different concentrations of chitosan. The optimum plasma treatment time was 10 s as determined from contact angle measurement. Effect of the plasma treatment on the surface roughness of the PE films was investigated by atomic force microscope (AFM) while the occurrence of polar functional groups was observed by X-ray photoelectron spectroscope (XPS) and Fourier transformed infrared spectroscope (FTIR). It was found that the surface roughness as well as the occurrence of oxygen-containing functional groups (i.e., C═O, C-O, and -OH) of the plasma-treated PE films increased from those of the untreated one, indicating that the DBD plasma enhanced hydrophilicity of the PE films. The amounts of chitosan coated on the PE films were determined after washing the coated films in water for several number of washing cycles prior to detection of the chitosan content by the Kjaldahl method. The amounts of chitosan coated on the PE films were constant after washing for three times and the chitosan-coated PE films exhibited appreciable antibacterial activity against Escherichia coli and Staphylococcus aureus. Hence, the obtained chitosan-coated PE films could be a promising candidate for antibacterial food packaging.

  19. The effect of autologous platelet rich plasma in treatment lateral epicondylitis

    Directory of Open Access Journals (Sweden)

    İsmail Ağır

    2011-03-01

    Full Text Available Lateral epicondylitis (tennis elbow is the most commonly diagnosed cause of lateral elbow pain. The aim of this study was to compare the effect of single dose corticosteroid and autologous platelet rich plasma (PRP injection in the treatment of tennis elbow.Materials and methods: The 15 elbow of 15 patients (6 male and 9 female was included in the study, who applied to our clinic with lateral elbow pain and diagnosed as lateral epicondylitis. A single dose of 0,5 ml Bethametasone and 0,5 ml Prilocaine mixture was applied to first group and single dose 1 ml autologous PRP was locally applied to the second group.Results: In the early follow-ups the results of corticosteroid group were better than latter follow-ups, however in PRP group the results were worst in early follow-ups but better results were obtained in later follow-ups according to Verhaar scoring system.Conclusion: According to our results, the beneficial effects of PRP injection in lateral epicondylitis increases over time but further studies with more patients and longer follow up durations should done in order to more clarified this subject.

  20. Reduced plasma taurine level in Parkinson's disease: association with motor severity and levodopa treatment.

    Science.gov (United States)

    Zhang, Li; Yuan, Yongsheng; Tong, Qing; Jiang, Siming; Xu, Qinrong; Ding, Jian; Zhang, Lian; Zhang, Rui; Zhang, Kezhong

    2016-01-01

    This study aimed to evaluate the level of taurine in plasma, and its association with the severity of motor and non-motor symptoms (NMS) and chronic levodopa treatment in Parkinson's disease (PD). Plasma taurine level was measured in treated PD (tPD), untreated PD (ntPD) and control groups. Motor symptoms and NMS were assessed using the Unified Parkinson's Disease Rating Scale, the short form of the McGill Pain Questionnaire, the Hamilton Depression Scale, the Scale for Outcomes in Parkinson's disease for Autonomic Symptoms and the Pittsburgh Sleep Quality Index. Longtime exposure to levodopa was indicated by its approximate cumulative dosage. The plasma taurine levels of PD patients were decreased when compared with controls and negatively associated with motor severity but not NMS. Moreover, tPD patients exhibited lower levels of plasma taurine than ntPD patients. Interestingly, plasma taurine levels negatively correlated with cumulative levodopa dosage in tPD. After controlling for potential confounders, the association between taurine and levodopa remained significant. Our study supports that taurine may play important roles in the pathophysiology of PD and the disturbances caused by chronic levodopa administration.

  1. Improving electrochemical properties of AISI 1045 steels by duplex surface treatment of plasma nitriding and aluminizing

    Energy Technology Data Exchange (ETDEWEB)

    Haftlang, Farahnaz, E-mail: f.haftlang@students.semnan.ac.ir [Department of Metallurgy and Materials Engineering, Faculty of Engineering, Semnan University, Semnan (Iran, Islamic Republic of); Habibolahzadeh, Ali [Department of Metallurgy and Materials Engineering, Faculty of Engineering, Semnan University, Semnan (Iran, Islamic Republic of); Sohi, Mahmoud Heydarzadeh [School of Metallurgy and Materials, College of Engineering, University of Tehran, Tehran (Iran, Islamic Republic of)

    2015-02-28

    Highlights: • AlN coating was applied on AISI 1045 steel via plasma nitriding and aluminizing. • Plasma nitriding and post-aluminizing result in AlN single phase layer on the steel. • PN–Al coated steel had better corrosion resistance than Al–PN one. • Formation of oxide layer provided protection of PN–Al coated steel against corrosion. • Pitting and surface defects was the dominant corrosion mechanism in Al–PN coated steel. - Abstract: Improvement in electrochemical behavior of AISI 1045 steel after applying aluminum nitride coating was investigated in 3.5% NaCl solution, using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) analyses. Aluminum nitride coating was applied on the steel surface by duplex treatment of pack aluminizing and plasma nitriding. Some specimens were plasma nitrided followed by aluminizing (PN–Al), while the others were pack aluminized followed by plasma nitriding (Al–PN). Topological and structural studies of the modified surfaces were conducted using scanning electron microscope (SEM) equipped by energy dispersive X-ray spectroscope (EDS), and X-ray diffractometer (XRD). The electrochemical measurements showed that the highest corrosion and polarization (R{sub p}) resistances were obtained in PN–Al specimens, having single phase superficial layer of AlN. Pitting mechanism was dominant reason of lower corrosion resistance in the Al–PN specimens.

  2. Single injection of platelet-rich plasma as a novel treatment of carpal tunnel syndrome

    Directory of Open Access Journals (Sweden)

    Michael Alexander Malahias

    2015-01-01

    Full Text Available Both in vitro and in vivo experiments have confirmed that platelet-rich plasma has therapeutic effects on many neuropathies, but its effects on carpal tunnel syndrome remain poorly understood. We aimed to investigate whether single injection of platelet-rich plasma can improve the clinical symptoms of carpal tunnel syndrome. Fourteen patients presenting with median nerve injury who had suffered from mild carpal tunnel syndrome for over 3 months were included in this study. Under ultrasound guidance, 1-2 mL of platelet-rich plasma was injected into the region around the median nerve at the proximal edge of the carpal tunnel. At 1 month after single injection of platelet-rich plasma, Visual Analogue Scale results showed that pain almost disappeared in eight patients and it was obviously alleviated in three patients. Simultaneously, the disabilities of the arm, shoulder and hand questionnaire showed that upper limb function was obviously improved. In addition, no ultrasonographic manifestation of the carpal tunnel syndrome was found in five patients during ultrasonographic measurement of the width of the median nerve. During 3-month follow-up, the pain was not greatly alleviated in three patients. These findings show very encouraging mid-term outcomes regarding use of platelet-rich plasma for the treatment of carpal tunnel syndrome.

  3. Effect of plasma nitriding treatment on structural, tribological and electrochemical properties of commercially pure titanium.

    Science.gov (United States)

    Çelik, İlhan; Karakan, Mehmet

    2016-02-01

    In this study, plasma nitriding treatment was applied to commercially pure titanium (Grade 2). Structural properties, electrochemical and tribological behaviours of the nitrided pure titanium specimens were comparatively investigated. Microstructure and morphology of the plasma nitrided specimens were analysed by X-ray diffraction and scanning electron microscopy. Furthermore, corrosion tests were conducted in Ringer's solution, which represents a human body environment, to determine electrochemical properties. Then, tribological and frictional properties were investigated using pin-on-disc tribometer, and a micro-hardness tester was used to measure the hardness of the coatings. The results showed that plasma nitrided specimens exhibited higher surface hardness than the untreated specimens did. In addition, the plasma nitrided specimens at 700 °C presented significantly better performance than the other plasma nitrided specimens (at 500 °C and 600 °C) under dry wear conditions. Moreover, corrosion test results showed that corrosion behaviours of untreated and nitrided samples had similar characteristic. © IMechE 2015.

  4. Effect of cholesterol lowering treatment on plasma markers of endothelial dysfunction in chronic kidney disease.

    Science.gov (United States)

    Zinellu, Angelo; Sotgia, Salvatore; Mangoni, Arduino A; Sotgiu, Elisabetta; Ena, Sara; Satta, Andrea E; Carru, Ciriaco

    2016-09-10

    The elevated cardiovascular morbidity and mortality in chronic kidney disease (CKD) is linked with endothelial dysfunction secondary to the pro-inflammatory and pro-oxidative state typical of this pathology. In consideration of the well-known pleiotropic effect of statins, we investigated the effect of cholesterol lowering treatment on endothelial dysfunction markers (MED), asymmetric dimethylarginine (ADMA), vascular cell (VCAM) and intercellular (ICAM) adhesion molecule. Plasma MED concentrations, inflammation and oxidative stress indices [Kynurenine/Tryptophan (Kyn/Trp) ratio, malondialdehyde (MDA) and allantoin/uric acid (All/UA) ratio] were measured in 30 CKD patients randomized to three cholesterol lowering regimens for 12 months (simvastatin 40mg/day, ezetimibe/simvastatin 10/20mg/day, or ezetimibe/simvastatin 10/40mg/day). Treatment significantly reduced ADMA concentrations in all patients [0.694μmol/L (0.606-0.761) at baseline vs. 0.622μmol/L (0.563-0.681) after treatment, p<0.001]. ADMA reduction was paralleled by a significant decrease of MDA, All/AU ratio and Kyn/Trp ratio, but not VCAM and ICAM plasma concentrations. Cholesterol lowering treatment was associated with a significant reduction in plasma ADMA concentrations in CKD patients. This might be mediated by reduced oxidative stress and inflammation.

  5. [Fluoxetine (FX) efficacy in the treatment of cocaine dependence methadone maintenance patients. Interaction with plasma levels].

    Science.gov (United States)

    Baño, M D; Agujetas, M; López, M L; Tena, T; Rodríguez, A; Lora-Tamayo, C; Guillén, J L

    1999-01-01

    The objective of this study was to assess the efficacy of fluoxetine (FX) treatment in cocaine dependent methadone (MTD) maintenance patients, to assess decrease or interruption of cocaine use and pharmacokinetic interaction between fluoxetine an methadone plasma levels. The sample was composed of 11 patients with DSM IV criteria for opioid and cocaine dependence. We added Fluoxetine (20 mg per day) during 9 weeks in Majadahonda Drug Program. All patients were in methadone program a mean of 7.5 months. We made a psychiatry interview and the baseline severity of the mood disorder was assessed with the Clinical Global Impression ICG for therapeutic improvement. Cocaine use and fluoxetine treatment was measured in urine analysis and pharmacokinetic interaction between FX-MTD were measured with plasma levels of methadone. Fluoxetine was well tolerated combined with methadone. FX-MTD interaction didn't occur, resulting in no increased of MTD plasma level to dose before and after fluoxetine treatment. After fluoxetine treatment decreased cocaine use, changed cocaine tract from injected to smoked and improvement depressive symptoms.

  6. Cold atmospheric plasma: a new tool for the treatment of superficial driveline infections.

    Science.gov (United States)

    Hilker, Lutz; von Woedtke, Thomas; Weltmann, Klaus Dieter; Wollert, Hans-Georg

    2017-01-01

    Percutaneous driveline infections (DI) are leading factors for morbidity and mortality in ventricular assist device (VAD) patients. In recent years, cold atmospheric plasma (CAP) has been safely and effectively used in clinical settings to treat topical infections. We describe the first use of CAP to treat a superficial DI. CAP was applied with the kinPen® MED plasma jet device (neoplas tools GmbH, Greifswald, Germany), in the treatment of a DI in a 66-year-old VAD patient in Klinikum Karlsburg, Germany. The patient received a daily application of CAP of 1 min for 12 days. One CAP application was administered each week for 4 weeks in our outpatient clinic after patient discharge. Laboratory tests were conducted and photographs of the driveline exit site were taken. After CAP treatment, the local infection was completely regressed without any signs of exudation or recurrence of the infection. There were no adverse side effects observed, and the HVAD logfile data did not show any abnormalities during treatment. Here, we demonstrate a successful resolution of a VAD DI with the kinPen plasma jet device. We believe that CAP has the potential to be a simple and effective tool in the treatment of superficial DIs.

  7. INTRALESIONAL PLATELET RICH PLASMA vs INTRALESIONAL TRIAMCINOLONE IN THE TREATMENT OF ALOPECIA AREATA: A COMPARATIVE STUDY

    Directory of Open Access Journals (Sweden)

    Shumez H, Prasad PVS, Kaviarasan PK, Deepika R

    2015-01-01

    Full Text Available Background: Alopecia areata (AA is a chronic non-scarring alopecia that involves the scalp and/or body, and is characterized by patchy areas of hair loss without any signs of clinical inflammation. Various therapies have been proposed for their treatment.But none have been shown to alter the course of the disease. Platelet Rich Plasma (PRP is a volume of autologous plasma that has a high platelet concentration. Growth factors released from platelets may act on stem cells in the bulge area of the follicles, stimulating the development of new follicles and promoting neovascularization. Aim: To evaluate and compare the efficacy of intralesional injection of autologous platelet rich plasma with intralesional injection of triamcinolone acetonide (10mg/ml in the treatment of alopecia areata. Methodology: 74 patients with alopecia areata were allocated into 2 groups and treated with triamcinolone and PRP injections. Treatment outcome was measured by taking into account extent and density of regrowth of hair and was expressed as a percentage of overall growth. Results: Forty eight patients were treated with triamcinolone injections and 26 patients were treated with PRP injections. Patients treated with PRP had an earlier response at the end of 6weeks than patients treated with triamcinolone. However, this difference was statistically insignificant. The overall improvement at the end of 9 weeks was 100% for all patients in both groups. Conclusion: PRP is a safe, simple, biocompatible and effective procedure for the treatment of alopecia areata with efficacy comparable with triamcinolone.

  8. The effect of oxygen-plasma treatment on the mechanical and piezoelectrical properties of ZnO nanorods

    Science.gov (United States)

    Hussain, Mushtaque; Khan, Azam; Nur, Omer; Willander, Magnus; Broitman, Esteban

    2014-07-01

    We have studied the effect of oxygen plasma treatment on piezoelectric response and on the mechanical stability of ZnO nanorods synthesized on FTO by using ACG method. XRD and SEM techniques have shown highly dense and uniformly distributed nanorods. The piezoelectric properties and mechanical stability of as-grown and oxygen plasma treated samples were investigated by using nanoindentation technique. The comparison of load-displacement curves showed that the oxygen plasma treated samples are much stiffer and show higher generated piezo-voltage. This study demonstrates that the oxygen-plasma treatment is a good option to fabricate reliable and efficient nanodevices for enhanced generation of piezoelectricity.

  9. Advanced Mixed Waste Treatment Project melter system preliminary design technical review meeting

    Energy Technology Data Exchange (ETDEWEB)

    Eddy, T.L.; Raivo, B.D.; Soelberg, N.R.; Wiersholm, O.

    1995-02-01

    The Idaho National Engineering Laboratory Advanced Mixed Waste Treatment Project sponsored a plasma are melter technical design review meeting to evaluate high-temperature melter system configurations for processing heterogeneous alpha-contaminated low-level radioactive waste (ALLW). Thermal processing experts representing Department of Energy contractors, the Environmental Protection Agency, and private sector companies participated in the review. The participants discussed issues and evaluated alternative configurations for three areas of the melter system design: plasma torch melters and graphite arc melters, offgas treatment options, and overall system configuration considerations. The Technical Advisory Committee for the review concluded that graphite arc melters are preferred over plasma torch melters for processing ALLW. Initiating involvement of stakeholders was considered essential at this stage of the design. For the offgas treatment system, the advisory committee raised the question whether to a use wet-dry or a dry-wet system. The committee recommended that the waste stream characterization, feed preparation, and the control system are essential design tasks for the high-temperature melter treatment system. The participants strongly recommended that a complete melter treatment system be assembled to conduct tests with nonradioactive surrogate waste material. A nonradioactive test bed would allow for inexpensive design and operational changes prior to assembling a system for radioactive waste treatment operations.

  10. Plasma treatment of dentin surfaces for improving self-etching adhesive/dentin interface bonding.

    Science.gov (United States)

    Dong, Xiaoqing; Li, Hao; Chen, Meng; Wang, Yong; Yu, Qingsong

    2015-06-01

    This study is to evaluate plasma treatment effects on dentin surfaces for improving self-etching adhesive and dentin interface bonding. Extracted unerupted human third molars were used after crown removal to expose dentin. One half of each dentin surface was treated with atmospheric non-thermal argon plasmas, while another half was untreated and used as the same tooth control. Self-etching adhesive and universal resin composite was applied to the dentin surfaces as directed. After restoration, the adhesive-dentin bonding strength was evaluated by micro-tensile bonding strength (μTBS) test. Bonding strength data was analyzed using histograms and Welch's t-test based on unequal variances. μTBS test results showed that, with plasma treatment, the average μTBS value increased to 69.7±11.5 MPa as compared with the 57.1±17.5 MPa obtained from the untreated controls. After 2 months immersion of the restored teeth in 37 °C phosphate buffered saline (PBS), the adhesive-dentin bonding strengths of the plasma-treated specimens slightly decreased from 69.7±11.5 MPa to 63.9±14.4 MPa, while the strengths of the untreated specimens reduced from 57.1±17.5 MPa to 48.9±14.6 MPa. Water contact angle measurement and scanning electron microscopy (SEM) examination verified that plasma treatment followed by water rewetting could partially open dentin tubules, which could enhance adhesive penetration to form thicker hybrid layer and longer resin tags and consequently improve the adhesive/dentin interface quality.

  11. Plasma treatment of dentin surfaces for improving self-etching adhesive/dentin interface bonding

    Science.gov (United States)

    Dong, Xiaoqing; Li, Hao; Chen, Meng; Wang, Yong; Yu, Qingsong

    2015-01-01

    This study is to evaluate plasma treatment effects on dentin surfaces for improving self-etching adhesive and dentin interface bonding. Extracted unerupted human third molars were used after crown removal to expose dentin. One half of each dentin surface was treated with atmospheric non-thermal argon plasmas, while another half was untreated and used as the same tooth control. Self-etching adhesive and universal resin composite was applied to the dentin surfaces as directed. After restoration, the adhesive-dentin bonding strength was evaluated by micro-tensile bonding strength (μTBS) test. Bonding strength data was analyzed using histograms and Welch’s t-test based on unequal variances. μTBS test results showed that, with plasma treatment, the average μTBS value increased to 69.7±11.5 MPa as compared with the 57.1±17.5 MPa obtained from the untreated controls. After 2 months immersion of the restored teeth in 37 °C phosphate buffered saline (PBS), the adhesive-dentin bonding strengths of the plasma-treated specimens slightly decreased from 69.7±11.5 MPa to 63.9±14.4 MPa, while the strengths of the untreated specimens reduced from 57.1±17.5 MPa to 48.9±14.6 MPa. Water contact angle measurement and scanning electron microscopy (SEM) examination verified that plasma treatment followed by water rewetting could partially open dentin tubules, which could enhance adhesive penetration to form thicker hybrid layer and longer resin tags and consequently improve the adhesive/dentin interface quality. PMID:26273561

  12. Treatment results of combined platelet-rich plasma and fat injection in patients with velopharyngeal insufficiency

    Directory of Open Access Journals (Sweden)

    Hamid Reza Fathi

    2013-10-01

    Full Text Available Background: Velopharyngeal insufficiency causes hypernasal vocal quality and can also result in audible nasal air emission and difficulty in producing pressure consonants. The resulting speech is often socially unacceptable and can be difficult to understand. Platelet-rich plasma is an autologous derivative of whole blood. Today, the importance of clinical use of Platelet-rich plasma in the plastic surgery is considered. This study was designed to evaluate the effectiveness of combined Platelet-rich plasma and fat injection in the treatment of velopharyngeal insufficiency. Methods: In this prospective clinicaltrial study, of 15 patients including 9 males and 6 females and aged 15-20 years with mild/ moderate velopharyngeal insufficiency who were injected with 5 mL of combined Platelet-rich plasma (1 mL and fat (4 mL in the front volume in the posterior pharyngeal wall in the pre-vertebral fascia under sedation. Speech samples were recorded by nasoendoscopy before the injection, and at 6 weeks and 6 months after the injection. Assessment of pathologic speech was done by speech therapist. Results: Velar displacement showed significantly increased at 6 weeks after the injection (P=0.049. Velopharyngeal gap disappeared in 60% of patients at 6 weeks after the injection (P=0.019. Lateral pharyngeal wall movement showed significantly increased in 73.3% of the patients at 6 months after the injection (P=0.04. After the treatment, aerodynamic assessment showed significantly decreased in nasal air escape during phonation and repeat the words (P<0.05. Assessment speech therapist showed significantly improve quality of phonation in these patients (P<0.05. Conclusion: It seems that, combined Platelet-rich plasma and fat injection lead to improve voice resonance and reduce nasal air escape in all treated cases. It can be a promising alternative to major procedures, such as velopharyngoplasties, for the treatment of mild/ moderate velopharyngeal insufficiency.

  13. Effects O{sub 2} plasma surface treatment on the electrical properties of the ITO substrate

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jin-Woong; Oh, Dong-Hoon; Shim, Sang-Min; Lee, Young-Sang; Kang, Yong-Gil [Kwangwoon University, Seoul (Korea, Republic of); Shin, Jong-Yeol [Sahmyook University, Seoul (Korea, Republic of)

    2012-05-15

    The indium-tin-oxide (ITO) substrate is used as a transparent electrode in organic light-emitting diodes (OLEDs) and organic photovoltaic cells. The effect of an O{sub 2} plasma surface treatment on the electrical properties of the ITO substrate was examined. The four-point probe method, an atomic force microscope (AFM), a LCR meter, a Cole-Cole plot, and a conductive mechanism analysis were used to assess the properties of the treated ITO substrates. The four-point probe method and the AFM study revealed a lower ITO surface resistance of 17.6 Ω/sq and an average roughness of 2 nm, respectively, for a substrate treated by a plasma at 250 W for 40 s. The lower surface resistance of the ITO substrate treated at 250 W for 40 s was confirmed by using a LCR meter. An amorphous fluoropolymer (AF) was deposited on an ITO substrate treated under the optimal conditions and on a non-plasma treated ITO substrate as well. The potential barriers for charge injection in these devices were 0.25 eV and 0.15 eV, respectively, indicating a 0.1-eV decrease due to the plasma treatment.

  14. Plasma brain derived neurotrophic factor (BDNF) and response to ketamine in treatment-resistant depression.

    Science.gov (United States)

    Haile, C N; Murrough, J W; Iosifescu, D V; Chang, L C; Al Jurdi, R K; Foulkes, A; Iqbal, S; Mahoney, J J; De La Garza, R; Charney, D S; Newton, T F; Mathew, S J

    2014-02-01

    Ketamine produces rapid antidepressant effects in treatment-resistant depression (TRD), but the magnitude of response varies considerably between individual patients. Brain-derived neurotrophic factor (BDNF) has been investigated as a biomarker of treatment response in depression and has been implicated in the mechanism of action of ketamine. We evaluated plasma BDNF and associations with symptoms in 22 patients with TRD enrolled in a randomized controlled trial of ketamine compared to an anaesthetic control (midazolam). Ketamine significantly increased plasma BDNF levels in responders compared to non-responders 240 min post-infusion, and Montgomery-Åsberg Depression Rating Scale (MADRS) scores were negatively correlated with BDNF (r=-0.701, p = 0.008). Plasma BDNF levels at 240 min post-infusion were highly negatively associated with MADRS scores at 240 min (r = -0.897, p=.002), 24 h (r = -0.791, p = 0.038), 48 h (r = -0.944, p = 0.001) and 72 h (r = -0.977, p = 0.010). No associations with BDNF were found for patients receiving midazolam. These data support plasma BDNF as a peripheral biomarker relevant to ketamine antidepressant response.

  15. Successful treatment of avian-origin influenza A (H7N9 infection using convalescent plasma

    Directory of Open Access Journals (Sweden)

    Xiao-Xin Wu

    2015-12-01

    Full Text Available In January 2015, there was an outbreak of avian-origin influenza A (H7N9 virus in Zhejiang Province, China. A 45-year-old man was admitted to the First Affiliated Hospital of Zhejiang University with a high fever that had lasted 7 days, chills, and a cough with yellow sputum. Laboratory testing confirmed infection with the H7N9 virus, likely obtained from contact with poultry at a local live poultry market. A large dense shadow was apparent in the patient's left lung at the time of admission. Treatment with oseltamivir (75 mg twice daily did not improve the patient's condition. The decision was made to try using convalescent plasma to treat the infection. Convalescent plasma was administered 3 days after the patient was admitted to the hospital and led to a marked improvement. To our knowledge, this is the first report of the successful use of convalescent plasma to treat a case of H7N9 infection in China. These results suggest that the combination of convalescent plasma and antiviral drugs may be effective for the treatment of avian-origin H7N9 infection.

  16. Successful treatment of avian-origin influenza A (H7N9) infection using convalescent plasma.

    Science.gov (United States)

    Wu, Xiao-Xin; Gao, Hai-Nv; Wu, Hai-Bo; Peng, Xiu-Ming; Ou, Hui-Lin; Li, Lan-Juan

    2015-12-01

    In January 2015, there was an outbreak of avian-origin influenza A (H7N9) virus in Zhejiang Province, China. A 45-year-old man was admitted to the First Affiliated Hospital of Zhejiang University with a high fever that had lasted 7 days, chills, and a cough with yellow sputum. Laboratory testing confirmed infection with the H7N9 virus, likely obtained from contact with poultry at a local live poultry market. A large dense shadow was apparent in the patient's left lung at the time of admission. Treatment with oseltamivir (75mg twice daily) did not improve the patient's condition. The decision was made to try using convalescent plasma to treat the infection. Convalescent plasma was administered 3 days after the patient was admitted to the hospital and led to a marked improvement. To our knowledge, this is the first report of the successful use of convalescent plasma to treat a case of H7N9 infection in China. These results suggest that the combination of convalescent plasma and antiviral drugs may be effective for the treatment of avian-origin H7N9 infection.

  17. Syngas production by plasma treatments of alcohols, bio-oils and wood

    Science.gov (United States)

    Arabi, K.; Aubry, O.; Khacef, A.; Cormier, J.-M.

    2012-12-01

    Exploitation of forest resources for energy production includes various methods of biomass processing. Gasification is one of the ways to recover energy from biomass. The Syngas produced from biomass can be used to power internal combustion engines, or, after purification, to supply fuel cells. The paper is summarizing results obtained through a non thermal arc plasma reactor at laboratory scale. A stationary discharge (I = 150mA) is used to perform physical diagnostics and also chemical analysis. The arc is formed between two electrodes made of graphite. We first present results on plasma-steam reforming of alcohols and bio-oils mixed in water. The outlet gas compositions are given from various alcohols and-bio-oils obtained at different experimental conditions. The second part of the paper is dedicated to a direct plasma treatment of wood (beech) at laboratory scale. One of the electrodes is surrounded by wood. The final part of the paper is a general discussion about efficiencies and comparisons of plasma treatments presented. The results obtained are discussed by considering the steam reforming reactions and the water gas shift reaction.

  18. Diffuse plasma treatment of polyamide 66 fabric in atmospheric pressure air

    Science.gov (United States)

    Li, Lee; Peng, Ming-yang; Teng, Yun; Gao, Guozhen

    2016-01-01

    The polyamide 66 (PA66) fabrics are hard to be colored or glued in industrial production due to the poor hydrophily. Diffuse plasma is a kind of non-thermal plasma generated at atmospheric pressure in air. This paper proposes that large-scale diffuse plasma generated between wire electrodes can be employed for improving the hydrophily of PA66 fabrics. A repetitive nanosecond-pulse diffuse-discharge reactor using a cylindrical wire electrode configuration is presented, which can generate large-scale non-thermal plasmas steadily at atmospheric pressure without any barrier dielectric. Then the reactor is used to treat PA66 fabrics in different discharge conditions. The hydrophilicity property of modified PA66 is measured by wicking test method. The modified PA66 is also analyzed by atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) to prove the surface changes in physical microstructure and chemical functional groups, respectively. What's more, the effects of treatment time and treatment frequency on surface modification are investigated and discussed.

  19. The effect of plasma surface treatment on the bioactivity of titanium implant materials (in vitro).

    Science.gov (United States)

    Abdelrahim, Ramy A; Badr, Nadia A; Baroudi, Kusai

    2016-01-01

    The surface of an implantable biomaterial plays a very important role in determining the biocompatibility, osteoinduction, and osteointegration of implants because it is in intimate contact with the host bone and soft tissues. This study was aimed to assess the effect of plasma surface treatment on the bioactivity of titanium alloy (Ti-6Al-4V). Fifteen titanium alloy samples were used in this study. The samples were divided into three groups (with five samples in each group). Five samples were kept untreated and served as control (group A). Another five plasma samples were sprayed for nitrogen ion implantation on their surfaces (group B) and the last five samples were pre-etched with acid before plasma treatment (group C). All the investigated samples were immersed for 7 days in Hank's balanced salt solution (HBSS) which was used as a simulating body fluid (SBF) at pH 7.4 and 37°C. HBSS was renewed every 3 days. The different surfaces were characterized by X-ray diffraction (XRD), Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDXA), and Fourier Transformation Infrared Spectroscopy (FTIR). Nitriding of Ti-alloy samples via plasma nitrogen ion implantation increased the bioactivity of titanium. Moreover, the surface topography affected the chemical structure of the formed apatite. Increasing the surface roughness enhanced the bioactivity of the implant material. Nitridation can be exploited as an effective way to promote the formation of bone-like material on the implant surface.

  20. Inhibition of Aspergillus flavus on agar media and brown rice cereal bars using cold atmospheric plasma treatment.

    Science.gov (United States)

    Suhem, Kitiya; Matan, Narumol; Nisoa, Mudtorlep; Matan, Nirundorn

    2013-02-01

    This study aimed to optimize the operating parameters of cold atmospheric plasma treatment to inhibit the growth of Aspergillus flavus on agar media and brown rice cereal bars. The effects of argon plasma jet treatment on the growth of A. flavus on malt extract agar (MEA) at powers of 20 W and 40 W with exposure times at 5, 15 and 25 min were studied using response surface methodology (RSM) with a central composite face-centered (CCF) design. Multiple regression analysis indicated that plasma treatment at 40 W for 25 min is most effective for inhibiting growth of A. flavus on the agar medium. On brown rice cereal bars, plasma powered at 40 W for 20 min was capable of giving protection against A. flavus growth for up to 20 days under storage conditions of 25°C and 100% RH. These results demonstrated the potential of cold atmospheric plasma jet treatment to control mold growth on various food products.

  1. System and process for biomass treatment

    Science.gov (United States)

    Dunson, Jr., James B; Tucker, III, Melvin P; Elander, Richard T; Lyons, Robert C

    2013-08-20

    A system including an apparatus is presented for treatment of biomass that allows successful biomass treatment at a high solids dry weight of biomass in the biomass mixture. The design of the system provides extensive distribution of a reactant by spreading the reactant over the biomass as the reactant is introduced through an injection lance, while the biomass is rotated using baffles. The apparatus system to provide extensive assimilation of the reactant into biomass using baffles to lift and drop the biomass, as well as attrition media which fall onto the biomass, to enhance the treatment process.

  2. Proteomic characterization of freeze-dried human plasma: providing treatment of bleeding disorders without the need for a cold chain.

    Science.gov (United States)

    Steil, Leif; Thiele, Thomas; Hammer, Elke; Bux, Jürgen; Kalus, Monika; Völker, Uwe; Greinacher, Andreas

    2008-11-01

    Transfusion of human plasma is a basic treatment for severe coagulopathies, especially in major bleeding. The required logistics to provide plasma is challenging because of the need to maintain a cold chain. This disadvantage could be overcome by lyophilized plasma. However, it is unknown to what extent lyophilization alters plasma proteins. Quantitative proteomic technologies were applied to monitor protein changes during production of lyophilized, solvent/detergent (S/D)-treated plasma. The impact of S/D treatment and lyophilization on the plasma proteome was evaluated by differential in-gel electrophoresis (2D-DIGE), and proteins were characterized by mass spectrometry. Clotting factor activities were determined in lyophilized S/D-treated plasma after 24 months of storage at room temperature. By 2D-DIGE, 600 individual protein spots were compared. Lyophilization did not change any of the 600 spots, whereas pathogen inactivation caused significant changes of 38 spots including alpha1-antitrypsin, alpha1-antichymotrypsin, and alpha2-antiplasmin. Clotting factor activities remained stable over 24 months of storage. Lyophilization of human plasma neither alters its protein composition nor impairs its clotting capacity. It does not require cost-intensive logistics for storage and transport and can be quickly reconstituted. It is suggested that lyophilized, pathogen-inactivated plasma is an attractive option to provide the most important basic treatment for severe coagulopathies in areas without cold chain and to provide plasma with reduced time delay in emergency situations.

  3. Longitudinal Relationship between Plasma Reactive Oxygen Metabolites and Periodontal Condition in the Maintenance Phase of Periodontal Treatment

    Directory of Open Access Journals (Sweden)

    Tatsuya Machida

    2014-01-01

    Full Text Available Aim. The present cohort study describes the longitudinal relationship between plasma oxidative status and periodontitis progression during the maintenance phase of treatment. Materials and Methods. Forty-five patients (mean age 58.8 years were monitored from 2008 to 2013. Periodontal conditions, including probing pocket depth (PPD and clinical attachment level (CAL, were recorded. Measurements of plasma reactive oxygen metabolites (ROM and biologic antioxidant potential (BAP were performed to evaluate plasma oxidative status. The patients were assigned into 2 groups as low and high plasma ROM level using a cut-off value which was median of plasma ROM level at baseline. Results. In the subjects with low plasma ROM level at baseline, changes in mean CAL were positively correlated with changes in plasma ROM levels, bleeding on probing, and plaque control record, but not with PPD. In the subjects with high plasma ROM at baseline, changes in CAL were significantly associated with only PPD at baseline. On the other hands there were no significant associations between changes in CAL and those in plasma BAP levels. Conclusions. When plasma ROM level in periodontitis patients was low, increases in plasma ROM level were associated with those in CAL during the maintenance phase of treatment.

  4. The plasma membrane transport systems and adaptation to salinity.

    Science.gov (United States)

    Mansour, Mohamed Magdy F

    2014-11-15

    Salt stress represents one of the environmental challenges that drastically affect plant growth and yield. Evidence suggests that glycophytes and halophytes have a salt tolerance mechanisms working at the cellular level, and the plasma membrane (PM) is believed to be one facet of the cellular mechanisms. The responses of the PM transport proteins to salinity in contrasting species/cultivars were discussed. The review provides a comprehensive overview of the recent advances describing the crucial roles that the PM transport systems have in plant adaptation to salt. Several lines of evidence were presented to demonstrate the correlation between the PM transport proteins and adaptation of plants to high salinity. How alterations in these transport systems of the PM allow plants to cope with the salt stress was also addressed. Although inconsistencies exist in some of the information related to the responses of the PM transport proteins to salinity in different species/cultivars, their key roles in adaptation of plants to high salinity is obvious and evident, and cannot be precluded. Despite the promising results, detailed investigations at the cellular/molecular level are needed in some issues of the PM transport systems in response to salinity to further evaluate their implication in salt tolerance.

  5. Micro-scale Plasma Arc Gasification for Waste Treatment and Energy Production Project

    Science.gov (United States)

    Caraccio, Anne

    2015-01-01

    As NASA continues to develop technology for spaceflight beyond low earth orbit, we must develop the right systems for sustaining human life on a long duration or planetary mission. Plasma arc gasification (PAG) is an energy efficient mechanism of waste management for power generation and synthetic gas(syngas) production.

  6. Electro-Catalysis System for Biodiesel Synthesis from Palm Oil over Dielectric-Barrier Discharge Plasma Reactor

    Directory of Open Access Journals (Sweden)

    Istadi Istadi

    2014-07-01

    Full Text Available Biodiesel synthesis reaction routes from palm oil using plasma electro-catalysis process over Dielectric-Barrier Discharge (DBD plasma reactor were studied. The study was focused on finding possible reaction mechanism route during plasma electro-catalysis process. The prediction was performed based on the changes of Gas Chromatography Mass Spectrometer (GC-MS and Fourier Transform Infra Red (FT-IR analyses to the biodiesel products with respect to time length of plasma treatment. It was found that main reaction mechanism occurred in the plasma electro-catalysis system was non-thermal pyrolysis rather than transesterification. The main reactions within the plasma treatment were due to collision between high energetic electrons (supplied from high voltage power supply through high voltage electrode and the reaction mixtures. The high energetic electrons affected the electrons pair of covalent bonding to be excited or dissociated even ionized at higher energy. Therefore, this plasma electro-catalysis system was promising for biodiesel synthesis from vegetable oils due to only very short time reaction was needed, even no need a catalyst, no soap formation, and no glycerol by-product. This system could produce fatty acid methyl ester yield of 75.65% at 120 seconds and other possible chemicals, such as alkynes, alkanes, esters, carboxylic acid, and aldehydes. However, during the plasma process, the reaction mechanisms were still difficult to be controlled due the action of available high energetic electrons. The advanced studies on how to control the reaction mechanism selectively in the plasma electro-catalysis will be published elsewhere. © 2014 BCREC UNDIP. All rights reservedReceived: 23rd January 2014; Revised: 20th March 2014; Accepted: 23rd March 2014[How to Cite: Istadi, I., Yudhistira, A.D., Anggoro, D.D., Buchori, L. (2014. Electro-Catalysis System for Biodiesel Synthesis from Palm Oil over Dielectric-Barrier Discharge Plasma Reactor

  7. Wellbottom fluid implosion treatment system

    Energy Technology Data Exchange (ETDEWEB)

    Brieger, Emmet F. (HC 67 Box 58, Nogal, NM 88341)

    2001-01-01

    A system for inducing implosion shock forces on perforation traversing earth formations with fluid pressure where an implosion tool is selected relative to a shut in well pressure and a tubing pressure to have a large and small area piston relationship in a well tool so that at a predetermined tubing pressure the pistons move a sufficient distance to open an implosion valve which permits a sudden release of well fluid pressure into the tubing string and produces an implosion force on the perforations. A pressure gauge on the well tool records tubing pressure and well pressure as a function of time.

  8. Treatment of gastric cancer cells with non-thermal atmospheric plasma generated in water

    CERN Document Server

    Chen, Zhitong; Cheng, Xiaoqian; Gjika, Eda; Keidar, Michael

    2016-01-01

    Non-thermal atmospheric plasma (NTAP) can be applied to living tissues and cells as a novel technology for cancer therapy. Even though studies report on the successful use of NTAP to directly irradiate cancer cells, this technology can cause cell death only in the upper 3-5 cell layers. We report on a NTAP argon solution generated in DI water for treating human gastric cancer cells (NCl-N87). Our findings showed that the plasma generated in DI water during a 30-minute treatment had the strongest affect in inducing apoptosis in cultured human gastric cancer cells. This result can be attributed to presence of reactive oxygen species (ROS) and reactive nitrogen species (RNS) produced in water during treatment. Furthermore, the data showed that elevated levels of RNS may play an even more significant role than ROS in the rate of apoptosis in gastric cancer cells.

  9. Plasma Treatment of Polyethylene Powder Particles in Hollow Cathode Glow Discharge

    Science.gov (United States)

    Wolter, Matthias; Quitzau, Meike; Bornholdt, Sven; Kersten, Holger

    2008-09-01

    Polyethylen (PE) is widely used in the production of foils, insulators, packaging materials, plastic bottles etc. Untreated PE is hydrophobic due to its unpolar surface. Therefore, it is hard to print or glue PE and the surface has to be modified before converting. In the present experiments a hollow cathode glow discharge is used as plasma source which is mounted in a spiral conveyor in order to ensure a combines transport of PE powder particles. With this set-up a homogeneous surface treatment of the powder is possible while passing the glow discharge. The plasma treatment causes a remarkable enhancement of the hydrophilicity of the PE powder which can be verified by contact angle measurements and X-ray photoelectron spectroscopy.

  10. Regenerable Antibacterial Cotton Fabric by Plasma Treatment with Dimethylhydantoin: Antibacterial Activity against S. aureus

    Directory of Open Access Journals (Sweden)

    Chang-E. Zhou

    2017-01-01

    Full Text Available This study examined the influence of variables in a finishing process for making cotton fabric with regenerable antibacterial properties against Staphylococcus aureus (S. aureus. 5,5-dimethylhydantoin (DMH was coated onto cotton fabric by a pad-dry-plasma-cure method. Sodium hypochlorite was used for chlorinating the DMH coated fabric in order to introduce antibacterial properties. An orthogonal array testing strategy (OATS was used in the finishing process for finding the optimum treatment conditions. After finishing, UV-Visible spectroscopy, Scanning Electron Microscopy (SEM, and Fourier Transform Infrared Spectroscopy (FTIR were employed to characterise the properties of the treated cotton fabric, including the concentration of chlorine, morphological properties, and functional groups. The results show that cotton fabric coated with DMH followed by plasma treatment and chlorination can inhibit S. aureus and that the antibacterial property is regenerable.

  11. EFFECT OF COLD PLASMA TREATMENT ON THE FUNCTIONAL PROPERTIES OF FRESH-CUT APPLES.

    Science.gov (United States)

    Ramazzina, Ileana; Tappi, Silvia; Rocculi, Pietro; Sacchetti, Giampiero; Berardinelli, Annachiara; Marseglia, Angela; Rizzi, Federica

    2016-10-06

    The atmospheric double barrier discharge (DBD) plasma technology is a promising tool in food industry as an alternative to traditional food preservation methods. However, the effect of the reactive chemical species generated during the treatment on the qualitative and quantitative content of bioactive compounds in food is still little studied, as well as there are no data concerning potential deleterious effects of DBD treated foods on human cells. We measured antioxidants content and antioxidant capacity of DBD-treated minimally processed Pink Lady® apples in comparison with untreated matched samples. Moreover, we compared the effects of polyphenols extracts obtained from DBD-treated apples on cell viability, reactive oxygen species production and phase II enzyme activation. The results show that the plasma treatment causes a slight reduction of antioxidant content and antioxidant capacity. Noteworthy, apple treated polyphenols extracts do not reduce cell viability and do not suppress the beneficial physiological cell response to oxidative stress.

  12. Determination of the optimum conditions for lung cancer cells treatment using cold atmospheric plasma

    Science.gov (United States)

    Akhlaghi, Morteza; Rajaei, Hajar; Mashayekh, Amir Shahriar; Shafiae, Mojtaba; Mahdikia, Hamed; Khani, Mohammadreza; Hassan, Zuhair Mohammad; Shokri, Babak

    2016-10-01

    Cold atmospheric plasmas (CAPs) can affect live cells and organisms due to the production of different reactive species. In this paper, the effects of various parameters of the CAP such as the treatment time, gas mixture, gas flow rate, applied voltage, and distance from the nozzle on the LL/2 lung cancer cell line have been studied. The probable effect of UV radiation has also been