WorldWideScience

Sample records for plasma lens

  1. Plasma Lens for Muon and Neutrino Beams

    Energy Technology Data Exchange (ETDEWEB)

    Kahn,S.A.; Korenev, S.; Bishai, M.; Diwan, M.; Gallardo, J.C.; Hershcovitch, A.; Johnson, B.M.

    2008-06-23

    The plasma lens is examined as an alternate to focusing horns and solenoids for use in a neutrino or muon beam facility. The plasma lens concept is based on a combined high-energy lens/target configuration. The current is fed at electrodes located upstream and downstream from the target where pion capturing is needed. The current flows primarily in the plasma, which has a lower resistivity than the target. A second plasma lens section, with an additional current feed, follows the target to provide shaping of the plasma for optimum focusing. The plasma lens is immersed in an additional solenoid magnetic field to facilitate the plasma stability. The geometry of the plasma is shaped to provide optimal pion capture. Simulations of this plasma lens system have shown a 25% higher neutrino production than the horn system. Plasma lenses have the additional advantage of negligible pion absorption and scattering by the lens material and reduced neutrino contamination during anti-neutrino running. Results of particle simulations using plasma lens will be presented.

  2. Method and apparatus for sputtering with a plasma lens

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Andre

    2016-09-27

    A plasma lens for enhancing the quality and rate of sputter deposition onto a substrate is described herein. The plasma lens serves to focus positively charged ions onto the substrate while deflecting negatively charged ions, while at the same time due to the line of sight positioning of the lens, allowing for free passage of neutrals from the target to the substrate. The lens itself is formed of a wound coil of multiple turns, inside of which are deposed spaced lens electrodes which are electrically paired to impress an E field overtop the B field generated by the coil, the potential applied to the electrodes increasing from end to end towards the center of the lens, where the applied voltage is set to a high potential at the center electrodes as to produce a potential minimum on the axis of the lens.

  3. Plasma lens experiments at the Final Focus Test Beam

    Energy Technology Data Exchange (ETDEWEB)

    Barletta, B. [California Univ., Los Angeles, CA (United States)]|[Lawrence Berkeley Lab., CA (United States); Chattopadhyay, S. [Lawrence Berkeley Lab., CA (United States); Chen, P. [Stanford Linear Accelerator Center, Menlo Park, CA (United States)] [and others

    1993-04-01

    We intend to carry out a series of plasma lens experiments at the Final Focus Test Beam facility at SLAC. These experiments will be the first to study the focusing of particle beams by plasma focusing devices in the parameter regime of interest for high energy colliders, and is expected to lead to plasma lens designs capable of unprecedented spot sizes. Plasma focusing of positron beams will be attempted for the first time. We will study the effects of lens aberrations due to various lens imperfections. Several approaches will be applied to create the plasma required including laser ionization and beam ionization of a working gas. At an increased bunch population of 2.5 {times} 10{sup 10}, tunneling ionization of a gas target by an electron beam -- an effect which has never been observed before -- should be significant. The compactness of our device should prove to be of interest for applications at the SLC and the next generation linear colliders.

  4. Curved plasma channels: Kerr lens and Airy prism

    CERN Document Server

    Kasparian, Jérôme; 10.2971/jeos.2009.09039

    2010-01-01

    We analytically calculate the transverse energy fluxes that would be respectively induced in high-power Airy beams by the Kerr self-focusing and the Airy profile itself if they were the only active process. In experimental condition representative of laser filamentation experiments of high-power ultrashort laser pulses in air and condensed media, the Kerr lens induces transverse energy fluxes much larger than the Airy "prism" at the main peak. As a consequence, the curved plasma channels in Airy beams are not only a plasma spark on a curved focus, but indeed self-guided filaments, and their curved trajectory appears as a perturbation due to the linear Airy propagation regime.

  5. PLASMA LENS FOR US BASED SUPER NEUTRINO BEAM AT EITHER FNAL OR BNL.

    Energy Technology Data Exchange (ETDEWEB)

    HERSHCOVITCH,A.; WENG, W.; DIWAN, M.; GALLARDO, J.; KIRK, H.; JOHNSON, B.; KAHN, S.; GARATE, E.; VAN DRIE, A.; ROSTOKER, N.

    2007-06-25

    The plasma lens concept is examined as an alternative to focusing horns and solenoids for a neutrino beam facility. The concept is based on a combined high-current lens/target configuration. Current is fed at an electrode located downstream from the beginning of the target where pion capturing is needed. The current is carried by plasma outside the target. A second plasma lens section, with an additional current feed, follows the target. The plasma is immersed in a relatively small solenoidal magnetic field to facilitate its current profile shaping to optimize pion capture. Simulations of the not yet fully optimized configuration yielded a 25% higher neutrino flux at a detector situated at 3 km from the target than the horn system for the entire energy spectrum and a factor of 2.47 higher flux for neutrinos with energy larger than 3 GeV. A major advantage of plasma lenses is in background reduction. In anti-neutrino operation, neutrino background is reduced by a factor of close to 3 for the whole spectrum, and for and for energy larger than 3 GeV, neutrino background is reduced by a factor of 3.6. Plasma lenses have additional advantages: larger axial currents, high signal purity: minimal neutrino background in anti-neutrino runs. The lens medium consists of plasma, consequently, particle absorption and scattering is negligible. Withstanding high mechanical and thermal stresses in a plasma is not an issue.

  6. Demonstration of relativistic electron beam focusing by a laser-plasma lens.

    Science.gov (United States)

    Thaury, C; Guillaume, E; Döpp, A; Lehe, R; Lifschitz, A; Ta Phuoc, K; Gautier, J; Goddet, J-P; Tafzi, A; Flacco, A; Tissandier, F; Sebban, S; Rousse, A; Malka, V

    2015-04-16

    Laser-plasma technology promises a drastic reduction of the size of high-energy electron accelerators. It could make free-electron lasers available to a broad scientific community and push further the limits of electron accelerators for high-energy physics. Furthermore, the unique femtosecond nature of the source makes it a promising tool for the study of ultrafast phenomena. However, applications are hindered by the lack of suitable lens to transport this kind of high-current electron beams mainly due to their divergence. Here we show that this issue can be solved by using a laser-plasma lens in which the field gradients are five order of magnitude larger than in conventional optics. We demonstrate a reduction of the divergence by nearly a factor of three, which should allow for an efficient coupling of the beam with a conventional beam transport line.

  7. Submicron focusing of XUV radiation from a laser plasma source using a multilayer Laue lens

    Science.gov (United States)

    Reese, M.; Schäfer, B.; Großmann, P.; Bayer, A.; Mann, K.; Liese, T.; Krebs, H. U.

    2011-01-01

    The focusing properties of a one-dimensional multilayer Laue lens (MLL) were investigated using monochromatic soft X-ray radiation from a table-top, laser-produced plasma source. The MLL was fabricated by a focused ion beam (FIB) structuring of pulsed laser deposited ZrO2/Ti multilayers. This novel method offers the potential to overcome limitations encountered in electron lithographic processes. Utilizing this multilayer Laue lens, a line focus of XUV radiation from a laser-induced plasma in a nitrogen gas puff target could be generated. The evaluated focal length is close to the designed value of 220 μm for the measurement wavelength of 2.88 nm. Divergence angle and beam waist diameter are measured by a moving knife edge and a far-field experiment, determining all relevant second-order moments based beam parameters. The waist diameter has been found to be approximately 370 nm (FWHM).

  8. Demonstration of electron beam focusing by a laser-plasma lens

    CERN Document Server

    Thaury, Cédric; Döpp, Andreas; Lehe, Remi; Lifschitz, Agustin; Phuoc, Kim Ta; Gautier, Julien; Goddet, Jean-Philippe; Tafzi, Amar; Flacco, Alessandro; Tissandier, Fabien; Sebban, Stéphane; Rousse, Antoine; Malka, Victor

    2014-01-01

    Laser-plasma technology promises a drastic reduction of the size of high energy electron accelerators. It could make free electron lasers available to a broad scientific community, and push further the limits of electron accelerators for high energy physics. Furthermore the unique femtosecond nature of the source makes it a promising tool for the study of ultra-fast phenomena. However, applications are hindered by the lack of suitable lens to transport this kind of high-current electron beams, mainly due to their divergence. Here we show that this issue can be solved by using a laser-plasma lens, in which the field gradients are five order of magnitude larger than in conventional optics. We demonstrate a reduction of the divergence by nearly a factor of three, which should allow for an efficient coupling of the beam with a conventional beam transport line.

  9. Lipid-protein interactions in plasma membranes of fiber cells isolated from the human eye lens.

    Science.gov (United States)

    Raguz, Marija; Mainali, Laxman; O'Brien, William J; Subczynski, Witold K

    2014-03-01

    The protein content in human lens membranes is extremely high, increases with age, and is higher in the nucleus as compared with the cortex, which should strongly affect the organization and properties of the lipid bilayer portion of intact membranes. To assess these effects, the intact cortical and nuclear fiber cell plasma membranes isolated from human lenses from 41- to 60-year-old donors were studied using electron paramagnetic resonance spin-labeling methods. Results were compared with those obtained for lens lipid membranes prepared from total lipid extracts from human eyes of the same age group [Mainali, L., Raguz, M., O'Brien, W. J., and Subczynski, W. K. (2013) Biochim. Biophys. Acta]. Differences were considered to be mainly due to the effect of membrane proteins. The lipid-bilayer portions of intact membranes were significantly less fluid than lipid bilayers of lens lipid membranes, prepared without proteins. The intact membranes were found to contain three distinct lipid environments termed the bulk lipid domain, boundary lipid domain, and trapped lipid domain. However, the cholesterol bilayer domain, which was detected in cortical and nuclear lens lipid membranes, was not detected in intact membranes. The relative amounts of bulk and trapped lipids were evaluated. The amount of lipids in domains uniquely formed due to the presence of membrane proteins was greater in nuclear membranes than in cortical membranes. Thus, it is evident that the rigidity of nuclear membranes is greater than that of cortical membranes. Also the permeability coefficients for oxygen measured in domains of nuclear membranes were significantly lower than appropriate coefficients measured in cortical membranes. Relationships between the organization of lipids into lipid domains in fiber cells plasma membranes and the organization of membrane proteins are discussed.

  10. Properties of fiber cell plasma membranes isolated from the cortex and nucleus of the porcine eye lens.

    Science.gov (United States)

    Mainali, Laxman; Raguz, Marija; O'Brien, William J; Subczynski, Witold K

    2012-04-01

    The organization and physical properties of the lipid bilayer portion of intact cortical and nuclear fiber cell plasma membranes isolated from the eye lenses of two-year-old pigs were studied using electron paramagnetic resonance (EPR) spin-labeling. Membrane fluidity, hydrophobicity, and the oxygen transport parameter (OTP) were assessed from the EPR spectra of precisely positioned spin labels. Intact cortical and nuclear membranes, which include membrane proteins, were found to contain three distinct lipid environments. These lipid environments were termed the bulk lipid domain, boundary lipid domain, and trapped lipid domain (lipids in protein aggregates). The amount of boundary and trapped lipids was greater in intact nuclear membranes than in cortical membranes. The properties of intact membranes were compared with the organization and properties of lens lipid membranes made of the total lipid extracts from the lens cortex or nucleus. In cortical lens lipid membranes, only one homogenous environment was detected, which was designated as a bulk lipid domain (phospholipid bilayer saturated with cholesterol). Lens lipid membranes prepared from the lens nucleus possessed two domains, assigned as a bulk lipid domain and a cholesterol bilayer domain (CBD). In intact nuclear membranes, it was difficult to discriminate the CBD, which was clearly detected in nuclear lens lipid membranes, because the OTP measured in the CBD is the same as in the domain formed by trapped lipids. The two domains unique to intact membranes-namely, the domain formed by boundary lipids and the domain formed by trapped lipids-were most likely formed due to the presence of membrane proteins. It is concluded that formation of rigid and practically impermeable domains is enhanced in the lens nucleus, indicating changes in membrane composition that may help to maintain low oxygen concentration in this lens region.

  11. Plasma graft of poly(ethylene glycol) methyl ether methacrylate (PEGMA) on RGP lens surface for reducing protein adsorption

    Science.gov (United States)

    Shiheng, Yin; Li, Ren; Yingjun, Wang

    2017-01-01

    Poly(ethylene glycol) methyl ether methacrylate (PEGMA) was grafted on fluorosilicone acrylate rigid gas permissible contact lens surface by means of argon plasma induced polymerization to improve surface hydrophilicity and reduce protein adsorption. The surface properties were characterized by contact angle measurement, x-ray photoelectron spectroscopy (XPS) and atomic force microscopy respectively. The surface protein adsorption was evaluated by lysozyme solution immersion and XPS analysis. The results indicated that a thin layer of PEGMA was successfully grafted. The surface hydrophilicity was bettered and surface free energy increased. The lysozyme adsorption on the lens surface was reduced greatly. The study was supported by National Natural Science Foundation of China (No. 51273072).

  12. [Lens platform].

    Science.gov (United States)

    Łukaszewska-Smyk, Agnieszka; Kałuzny, Józef

    2010-01-01

    The lens platform defines lens structure and lens material. Evolution of lens comprises change in their shape, angulation of haptens and transition of three-piece lens into one-piece lens. The lens fall into two categories: rigid (PMMA) and soft (siliconic, acrylic, colameric). The main lens maaterials are polymers (hydrophilic and hydrophobic). The lens platform has an effect on biocompatibility, bioadhesion, stability of lens in capsule, degree of PCO evolution and sensitiveness to laser damages.

  13. Polymorphisms in sodium-dependent vitamin C transporter genes and plasma, aqueous humor and lens nucleus ascorbate concentrations in an ascorbate depleted setting.

    Science.gov (United States)

    Senthilkumari, Srinivasan; Talwar, Badri; Dharmalingam, Kuppamuthu; Ravindran, Ravilla D; Jayanthi, Ramamurthy; Sundaresan, Periasamy; Saravanan, Charu; Young, Ian S; Dangour, Alan D; Fletcher, Astrid E

    2014-07-01

    We have previously reported low concentrations of plasma ascorbate and low dietary vitamin C intake in the older Indian population and a strong inverse association of these with cataract. Little is known about ascorbate levels in aqueous humor and lens in populations habitually depleted of ascorbate and no studies in any setting have investigated whether genetic polymorphisms influence ascorbate levels in ocular tissues. Our objectives were to investigate relationships between ascorbate concentrations in plasma, aqueous humor and lens and whether these relationships are influenced by Single Nucleotide Polymorphisms (SNPs) in sodium-dependent vitamin C transporter genes (SLC23A1 and SLC23A2). We enrolled sixty patients (equal numbers of men and women, mean age 63 years) undergoing small incision cataract surgery in southern India. We measured ascorbate concentrations in plasma, aqueous humor and lens nucleus using high performance liquid chromatography. SLC23A1 SNPs (rs4257763, rs6596473) and SLC23A2 SNPs (rs1279683 and rs12479919) were genotyped using a TaqMan assay. Patients were interviewed for lifestyle factors which might influence ascorbate. Plasma vitamin C was normalized by a log10 transformation. Statistical analysis used linear regression with the slope of the within-subject associations estimated using beta (β) coefficients. The ascorbate concentrations (μmol/L) were: plasma ascorbate, median and inter-quartile range (IQR), 15.2 (7.8, 34.5), mean (SD) of aqueous humor ascorbate, 1074 (545) and lens nucleus ascorbate, 0.42 (0.16) (μmol/g lens nucleus wet weight). Minimum allele frequencies were: rs1279683 (0.28), rs12479919 (0.30), rs659647 (0.48). Decreasing concentrations of ocular ascorbate from the common to the rare genotype were observed for rs6596473 and rs12479919. The per allele difference in aqueous humor ascorbate for rs6596473 was -217 μmol/L, p ascorbate of -0.085 μmol/g, p ascorbate on aqueous humor ascorbate were higher for the GG

  14. Fine structure of modal focusing effect in a three dimensional plasma-sheath-lens formed by disk electrodes

    DEFF Research Database (Denmark)

    Stamate, Eugen; Yamaguchi, Masahito

    2015-01-01

    Modal and discrete focusing effects associated with three-dimensional plasma-sheath-lenses show promising potential for applications in ion beam extraction, mass spectrometry, plasma diagnostics and for basic studies of plasma sheath. The ion focusing properties can be adjusted by controlling the...

  15. Surface-Enhanced Raman Spectroscopy (SERS Tracking of Chelerythrine, a Na+/K+ Pump Inhibitor, into Cytosol and Plasma Membrane Fractions of Human Lens Epithelial Cell Cultures

    Directory of Open Access Journals (Sweden)

    Kevin M. Dorney

    2013-12-01

    Full Text Available Background/Aims: The quaternary benzo-phenanthridine alkaloid (QBA chelerythrine (CET is a pro-apoptotic drug and Na+/K+ pump (NKP inhibitor in human lens epithelial cells (HLECs. In order to obtain further insight into the mechanism of NKP inhibition by CET, its sub-cellular distribution was quantified in cytosolic and membrane fractions of HLEC cultures by surface-enhanced Raman spectroscopy (SERS. Methods: Silver nanoparticles (AgNPs prepared by the Creighton method were concentrated, and size-selected using a one-step tangential flow filtration approach. HLECs cultures were exposed to 50 μM CET in 300 mOsM phosphate-buffered NaCl for 30 min. A variety of cytosolic extracts, crude and purified membranes, prepared in lysing solutions in the presence and absence of a non-ionic detergent, were incubated with AgNPs and subjected to SERS analysis. Determinations of CET were based on a linear calibration plot of the integrated CET SERS intensity at its 659 cm-1 marker band as a function of CET concentration. Results: SERS detected chemically unaltered CET in both cytosol and plasma membrane fractions. Normalized for protein, the CET content was some 100 fold higher in the crude and purified plasma membrane fraction than in the soluble cytosolic extract. The total free CET concentration in the cytosol, free of membranes or containing detergent-solubilized membrane material, approached that of the incubation medium of HLECs. Conclusion: Given a negative membrane potential of HLECs the data suggest, but do not prove, that CET may traverse the plasma membrane as a positively charged monomer (CET+ accumulating near or above passive equilibrium distribution. These findings may contribute to a recently proposed hypothesis that CET binds to and inhibits the NKP through its cytosolic aspect.

  16. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...... of probabilistic functionalism, and concerns the environment and the mind, and adaptation by the latter to the former. This entry is about the lens model, and probabilistic functionalism more broadly. Focus will mostly be on firms and their employees, but, to fully appreciate the scope, we have to keep in mind...

  17. Lens Model

    DEFF Research Database (Denmark)

    Nash, Ulrik William

    2014-01-01

    Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory of probabil......Firms consist of people who make decisions to achieve goals. How do these people develop the expectations which underpin the choices they make? The lens model provides one answer to this question. It was developed by cognitive psychologist Egon Brunswik (1952) to illustrate his theory...

  18. Contact lens in keratoconus

    Directory of Open Access Journals (Sweden)

    Varsha M Rathi

    2013-01-01

    Full Text Available Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP lenses, soft and soft toric lenses, piggy back contact lenses (PBCL, hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the English language with the keywords keratoconus and various contact lenses such as Rose k lens, RGP lens, hybrid lens, scleral lens and PBCL.

  19. Acid phosphatase and lipid peroxidation in human cataractous lens epithelium

    Directory of Open Access Journals (Sweden)

    Vasavada Abhay

    1993-01-01

    Full Text Available The anterior lens epithelial cells undergo a variety of degenerative and proliferative changes during cataract formation. Acid phosphatase is primarily responsible for tissue regeneration and tissue repair. The lipid hydroperoxides that are obtained by lipid peroxidation of polysaturated or unsaturated fatty acids bring about deterioration of biological membranes at cellular and tissue levels. Acid phosphatase and lipid peroxidation activities were studied on the lens epithelial cells of nuclear cataract, posterior subcapsular cataract, mature cataract, and mixed cataract. Of these, mature cataractous lens epithelium showed maximum activity for acid phosphatase (516.83 moles of p-nitrophenol released/g lens epithelium and maximum levels of lipid peroxidation (86.29 O.D./min/g lens epithelium. In contrast, mixed cataractous lens epithelium showed minimum activity of acid phosphatase (222.61 moles of p-nitrophenol released/g lens epithelium and minimum levels of lipid peroxidation (54.23 O.D./min/g lens epithelium. From our study, we correlated the maximum activity of acid phosphatase in mature cataractous lens epithelium with the increased areas of superimposed cells associated with the formation of mature cataract. Likewise, the maximum levels of lipid peroxidation in mature cataractous lens epithelium was correlated with increased permeability of the plasma membrane. Conversely, the minimum levels of lipid peroxidation in mixed cataractous lens epithelium makes us presume that factors other than lipid peroxidation may also account for the formation of mixed type of cataract.

  20. Rapid cooled lens cell

    Science.gov (United States)

    Stubbs, David M.; Hsu, Ike C.

    1991-12-01

    This paper describes the optomechanical design, thermal analysis, fabrication, and test evaluation processes followed in developing a rapid cooled, infrared lens cell. Thermal analysis was the key engineering discipline exercised in the design phase. The effect of thermal stress on the lens, induced by rapid cooling of the lens cell, was investigated. Features of this lens cell that minimized the thermal stress will be discussed in a dedicated section. The results of thermal analysis on the selected lens cell design and the selection of the flow channel design in the heat exchanger will be discussed. Throughout the paper engineering drawings, illustrations, analytical results, and photographs of actual hardware are presented.

  1. Contact lens in keratoconus

    OpenAIRE

    Varsha M Rathi; Preeji S Mandathara; Srikanth Dumpati

    2013-01-01

    Contact lenses are required for the visual improvement in patients with keratoconus. Various contact lens options, such as rigid gas permeable (RGP) lenses, soft and soft toric lenses, piggy back contact lenses (PBCL), hybrid lenses and scleral lenses are availble. This article discusses about selection of a lens depending on the type of keratoconus and the fitting philosophies of various contact lenses including the starting trial lens. A Medline search was carried out for articles in the En...

  2. Iatrogenic Lens Injuries

    Directory of Open Access Journals (Sweden)

    Ümit Kamış

    2012-12-01

    Full Text Available During intraocular surgery, undesired damages of various etiology may occur in adjacent tissues. One of these tissues is the crystalline lens, which may be traumatized both in anterior segment and posterior segment surgeries, and when damaged, it usually causes marked decrease in visual acuity. The leading causes of iatrogenic lens injuries are intravitreal injection, laser iridotomy, phakic intraocular lens implantation, anterior chamber paracentesis, and vitreoretinal surgery. When crystalline lens damage occurs, its negative effect on visual function may be eliminated by performing cataract surgery intraoperatively or in elective conditions. (Turk J Ophthalmol 2012; 42: Supplement 27-30

  3. Superlensing Microscope Objective Lens

    CERN Document Server

    Yan, Bing; Parker, Alan; Lai, Yukun; Thomas, John; Yue, Liyang; Monks, James

    2016-01-01

    Conventional microscope objective lenses are diffraction limited, which means that they cannot resolve features smaller than half the illumination wavelength. Under white light illumination, such resolution limit is about 250-300 nm for an ordinary microscope. In this paper, we demonstrate a new superlensing objective lens which has a resolution of about 100 nm, offering at least two times resolution improvement over conventional objectives in resolution. This is achieved by integrating a conventional microscope objective lens with a superlensing microsphere lens using a 3D printed lens adaptor. The new objective lens was used for label-free super-resolution imaging of 100 nm-sized engineering and biological samples, including a Blu-ray disc sample, semiconductor chip and adenoviruses. Our work creates a solid base for developing a commercially-viable superlens prototype, which has potential to transform the field of optical microscopy and imaging.

  4. Unitary lens semiconductor device

    Science.gov (United States)

    Lear, Kevin L.

    1997-01-01

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  5. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, M.A.; Foreman, L.R.

    1997-07-08

    This invention describes a method for fabricating an intraocular lens made from clear Teflon{trademark}, Mylar{trademark}, or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube. 13 figs.

  6. Intraocular lens fabrication

    Energy Technology Data Exchange (ETDEWEB)

    Salazar, Mike A. (Albuquerque, NM); Foreman, Larry R. (Los Alamos, NM)

    1997-01-01

    This invention describes a method for fabricating an intraocular lens made rom clear Teflon.TM., Mylar.TM., or other thermoplastic material having a thickness of about 0.025 millimeters. These plastic materials are thermoformable and biocompatable with the human eye. The two shaped lenses are bonded together with a variety of procedures which may include thermosetting and solvent based adhesives, laser and impulse welding, and ultrasonic bonding. The fill tube, which is used to inject a refractive filling material is formed with the lens so as not to damage the lens shape. A hypodermic tube may be included inside the fill tube.

  7. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent Oct ... easy answer, and neither one considers long-term impacts. Phakic Intraocular Lenses for Nearsightedness FEB 27, 2017 ...

  8. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... lenses without a prescription in the United States. All contact lenses are medical devices that require a ... no such thing as a "one size fits all" contact lens. Lenses that are not properly fitted ...

  9. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her with a corneal abrasion. ... Studies Look at Effects of Marijuana on Vision FEB ...

  10. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ... wear any kind of contact lens. In Butler's case, the lenses caused an infection and left her ...

  11. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... Us About the Academy Jobs at the Academy Financial Relationships with Industry Medical Disclaimer Privacy Policy Terms ...

  12. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... be purchased over-the-counter or on the Internet," says Thomas Steinemann, MD, professor of ophthalmology at ... ask for a prescription. There is no such thing as a "one size fits all" contact lens. ...

  13. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Vision and Daily Eye Drops After One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume Contacts May Contain Chemicals ...

  14. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... 2016 More Eye Health News Studies Look at Effects of Marijuana on Vision FEB 28, 2017 By ...

  15. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... not require the same level of care or consideration as a standard contact lens because they can ... sell contacts without a prescription are breaking the law, and may be fined $11,000 per violation. " ...

  16. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Contact Lens-Related Eye Infections Mar 01, 2017 New Technology Helps the Legally Blind Be More Independent ... Worse? May 16, 2016 More Eye Health News New Dry Eye Treatment is a Tear-Jerker JUL ...

  17. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... glow-in-the-dark lizard lenses, costume contacts can certainly add a spooky, eye-popping touch. But ... consideration as a standard contact lens because they can be purchased over-the-counter or on the ...

  18. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... One Use Facts About Colored Contacts and Halloween Safety Colored Contact Lens Facts Over-the-Counter Costume ... use of colored contact lenses , from the U.S. Food and Drug Administration (FDA). Are the colored lenses ...

  19. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Healthy Contact Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 ... Number: * Email: * Enter code: * Message: Thank you Your feedback has been sent.

  20. Nonlinear laser pulse response in a crystalline lens.

    Science.gov (United States)

    Sharma, R P; Gupta, Pradeep Kumar; Singh, Ram Kishor; Strickland, D

    2016-04-01

    The propagation characteristics of a spatial Gaussian laser pulse have been studied inside a gradient-index structured crystalline lens with constant-density plasma generated by the laser-tissue interaction. The propagation of the laser pulse is affected by the nonlinearities introduced by the generated plasma inside the crystalline lens. Owing to the movement of plasma species from a higher- to a lower-temperature region, an increase in the refractive index occurs that causes the focusing of the laser pulse. In this study, extended paraxial approximation has been applied to take into account the evolution of the radial profile of the Gaussian laser pulse. To examine the propagation characteristics, variation of the beam width parameter has been observed as a function of the laser power and initial beam radius. The cavitation bubble formation, which plays an important role in the restoration of the elasticity of the crystalline lens, has been investigated.

  1. Thin Lens Ray Tracing.

    Science.gov (United States)

    Gatland, Ian R.

    2002-01-01

    Proposes a ray tracing approach to thin lens analysis based on a vector form of Snell's law for paraxial rays as an alternative to the usual approach in introductory physics courses. The ray tracing approach accommodates skew rays and thus provides a complete analysis. (Author/KHR)

  2. Colored Contact Lens Dangers

    Medline Plus

    Full Text Available ... Lens Use May 31, 2016 Is El Niño Making Your Allergies Worse? May 16, 2016 More Eye ... EyeSmart Embed EyeSmart videos on your website Promotional materials for eye health observances EyeSmart resources are also ...

  3. Hyperbolic metamaterial lens with hydrodynamic nonlocal response.

    Science.gov (United States)

    Yan, Wei; Mortensen, N Asger; Wubs, Martijn

    2013-06-17

    We investigate the effects of hydrodynamic nonlocal response in hyperbolic metamaterials (HMMs), focusing on the experimentally realizable parameter regime where unit cells are much smaller than an optical wavelength but much larger than the wavelengths of the longitudinal pressure waves of the free-electron plasma in the metal constituents. We derive the nonlocal corrections to the effective material parameters analytically, and illustrate the noticeable nonlocal effects on the dispersion curves numerically. As an application, we find that the focusing characteristics of a HMM lens in the local-response approximation and in the hydrodynamic Drude model can differ considerably. In particular, the optimal frequency for imaging in the nonlocal theory is blueshifted with respect to that in the local theory. Thus, to detect whether nonlocal response is at work in a hyperbolic metamaterial, we propose to measure the near-field distribution of a hyperbolic metamaterial lens.

  4. In vivo, Ex Vivo, and In Vitro Approaches to Study Intermediate Filaments in the Eye Lens.

    Science.gov (United States)

    Jarrin, Miguel; Young, Laura; Wu, Weiju; Girkin, John M; Quinlan, Roy A

    2016-01-01

    The role of the eye lens is to focus light into the retina. To perform this unique function, the ocular lens must be transparent. Previous studies have demonstrated the expression of vimentin, BFSP1, and BFSP2 in the eye lens. These intermediate filament (IF) proteins are essential to the optical properties of the lens. They are also important to its biomechanical properties, to the shape of the lens fiber cells, and to the organization and function of the plasma membrane. The eye lens is an iconic model in developmental studies, as a result different vertebrate models, including zebrafish, have been developed to study lens formation. In the present chapter, we have summarized the new approaches and the more breakthrough models (e.g., iPSc) that can be used to study the function of IFs in the ocular lens. We have presented three different groups of models. The first group includes in vitro models, where IFs can be studied and manipulated in lens cell cultures. The second includes ex vivo models. These replicate better the complex lens cell differentiation processes and the role(s) played by IFs. The third class is the in vivo models, and here, we have focused on Zebrafish and new imaging approaches using selective plane illumination microscopy. Finally, we present protocols on how to use these lens models to study IFs.

  5. The role of compound lens in optimizing the irradiation uniformity in longitudinal pumping laser

    Institute of Scientific and Technical Information of China (English)

    Li Han-Ming; Li Ying-Jun; Zhang Jie

    2004-01-01

    In order to optimize the axial irradiation uniformity of a laser in plasma, this paper investigates the role played by the compound lens using a ray-tracing method. Obtained results show that the adoption of the compound lens is capable of increasing the axial line-focus length. Meanwhile, after the energy attenuation in the plasma has been considered,moderating the optical parameter of the compound lens to obtain the corresponding energy output to compensate for the attenuation optimizes the irradiation uniformity along the focal line.

  6. LASER INDUCED THERMAL LENS EFFECT

    Institute of Scientific and Technical Information of China (English)

    沈俊; 黄孟才; 江景云; 施教芳

    1991-01-01

    The thermal lens effect has emerged in recent years as a novel ,highly sensitive tool for the study of the very weak molecular absorption of light energy,This paper discusses the theory and technique of the thermal lens measurement.Some opplications of the thermal lens measurement are described.A mode-mismatched dual-beam thermal lens experimental arragement with a modulated probe beam ,designed by the authors.for trace analysis is presented,and its detection limit was found to be 4.1×10-7 for Cu(Ⅱ) in ethanol and 80 mW excitation power.

  7. Physics of electrostatic lens

    Science.gov (United States)

    1981-09-01

    The purpose of this program was to study the physics of the ion-energy boosting electrostatic lens for collective ion acceleration in the Luce diode. Extensive work was done in preparation for experiments on the PI Pulserad 1150. Analytic work was done on the orbit of protons in a mass spectrometer and a copper stack for nuclear activation analysis of proton energy spectrum has been designed. Unfortunately, a parallel program which would provide the Luce diode for the collective ion acceleration experiment never materialized. As a result no experiments were actually performed on the Pulserad 1150.

  8. [Intraocular lens implantation in developmental lens disorders in children].

    Science.gov (United States)

    Kanigowska, Krystyna; Grałek, Mirosława; Kepa, Beata; Chipczyńska, Barbara

    2009-01-01

    The pediatric cataract surgery in eyes with developmental disorders, stay with still considerable challenge. At children, the lasting vision development extorts necessity quick settlement of refraction defect formed after operation. The intraocular lens old boy with cataract in microspherophakia and 12 years old boy with cataract in lens with coloboma. One-piece flexible and rigid PMMA intraocular lens was placed with success at posterior chamber without scleral fixations and without using capsular tension ring in this cases. After 3 years of observation there were no decentration or dislocation of intraocular lens in both children. Authors concluded that in some cases posterior chamber intraocular lens implantation despite defective zonular or capsular support, can make up the effective method of surgical treatment without risk of early dislocation.

  9. Panoramic lens applications revisited

    Science.gov (United States)

    Thibault, Simon

    2008-04-01

    During the last few years, innovative optical design strategies to generate and control image mapping have been successful in producing high-resolution digital imagers and projectors. This new generation of panoramic lenses includes catadioptric panoramic lenses, panoramic annular lenses, visible/IR fisheye lenses, anamorphic wide-angle attachments, and visible/IR panomorph lenses. Given that a wide-angle lens images a large field of view on a limited number of pixels, a systematic pixel-to-angle mapping will help the efficient use of each pixel in the field of view. In this paper, we present several modern applications of these modern types of hemispheric lenses. Recently, surveillance and security applications have been proposed and published in Security and Defence symposium. However, modern hemispheric lens can be used in many other fields. A panoramic imaging sensor contributes most to the perception of the world. Panoramic lenses are now ready to be deployed in many optical solutions. Covered applications include, but are not limited to medical imaging (endoscope, rigiscope, fiberscope...), remote sensing (pipe inspection, crime scene investigation, archeology...), multimedia (hemispheric projector, panoramic image...). Modern panoramic technologies allow simple and efficient digital image processing and the use of standard image analysis features (motion estimation, segmentation, object tracking, pattern recognition) in the complete 360° hemispheric area.

  10. Modelling of new generation plasma optical devices

    Directory of Open Access Journals (Sweden)

    Litovko Irina V.

    2016-06-01

    Full Text Available The paper presents new generation plasma optical devices based on the electrostatic plasma lens configuration that opens a novel attractive possibility for effective high-tech practical applications. Original approaches to use of plasma accelerators with closed electron drift and open walls for the creation of a cost-effective low-maintenance plasma lens with positive space charge and possible application for low-cost, low-energy rocket engine are described. The preliminary experimental, theoretical and simulation results are presented. It is noted that the presented plasma devices are attractive for many different applications in the state-of-the-art vacuum-plasma processing.

  11. Plasma lenses for ultrashort multi-petawatt laser pulses

    CERN Document Server

    Palastro, J P; Hafizi, B; Johnson, L A; Penano, J; Hubbard, R F; Helle, M; Kaganovich, D

    2015-01-01

    An ideal plasma lens can provide the focusing power of a small f-number, solid-state focusing optic at a fraction of the diameter. An ideal plasma lens, however, relies on a steady-state, linear laser pulse-plasma interaction. Ultrashort multi-petawatt (MPW) pulses possess broad bandwidths and extreme intensities, and, as a result, their interaction with the plasma lens is neither steady state nor linear. Here we examine nonlinear and time-dependent modifications to plasma lens focusing, and show that these result in chromatic and phase aberrations and amplitude distortion. We find that a plasma lens can provide enhanced focusing for 30 fs pulses with peak power up to ~1 PW. The performance degrades through the MPW regime, until finally a focusing penalty is incurred at ~10 PW.

  12. Oral Morphine Consumption Reduces Lens Development in Rat Embryos

    Directory of Open Access Journals (Sweden)

    Hossein Bahadoran

    2012-07-01

    Full Text Available Objective: Consumption of morphine, during pregnancy, in addition to inducing defects in the mother’s nervous system function, caused defects or delays in the formation and evolution of embryonic visual system. In the present study, changes in lens development was assessed in embryos exposed in utero to morphine. Material and Methods: Female Wistar rats (250-300 g were mated with male rats and pregnancy was determined by sperm observation in vaginal smear. This day was considered as embryonic day zero (E0. The females were then divided randomly into the experimental and the control groups. The control group received tap water and the experimental group received morphine (0.05 mg/ml in their water. On embryonic day 13 ( E13, blood samples were collected from the retro-orbital sinus of all animals for plasma corticosterone detection. On embryonic day 17(E17, the animals were killed by an overdose of chloroform and the embryos were taken out surgically. The embryos were fixed in 10% formalin for 30 days. At this time, the head of the embryos were removed for tissue processing and Hematoxylin- Eosin (H&E staining. The samples were evaluated using light microscope and MOTIC software. Results: Our data indicated that plasma corticosterone level was dramatically increased and the lens was thinner in the experimental group. (Although the proliferation of lens cells increased in the experiment group but that lens had delay in removing the proliferated and elongation cells with abnormal density in the lateral part of the lens in compare with control group. I have no idea what the authors are stating here. Moreover, the opening of the eyelids was delayed in the off springs of the mothers who received morphine. Conclusions: This study showed that morphine consumption during pregnancy leads to defects in fetal visual system development, particularly in the lens, and eyelids.

  13. The Deep Lens Survey

    CERN Document Server

    Wittman, D; Dell'Antonio, I P; Becker, A C; Margoniner, V E; Cohen, J; Norman, D; Loomba, D; Squires, G; Wilson, G; Stubbs, C; Hennawi, J F; Spergel, D N; Boeshaar, P C; Clocchiatti, A; Hamuy, M; Bernstein, G; González, A; Guhathakurta, R; Hu, W; Seljak, U; Zaritsky, D

    2002-01-01

    The Deep Lens Survey (DLS) is a deep BVRz' imaging survey of seven 2x2 degree fields, with all data to be made public. The primary scientific driver is weak gravitational lensing, but the survey is also designed to enable a wide array of other astrophysical investigations. A unique feature of this survey is the search for transient phenomena. We subtract multiple exposures of a field, detect differences, classify, and release transients on the Web within about an hour of observation. Here we summarize the scientific goals of the DLS, field and filter selection, observing techniques and current status, data reduction, data products and release, and transient detections. Finally, we discuss some lessons which might apply to future large surveys such as LSST.

  14. Lens array fabrication method with volume expansion property of PDMS

    Science.gov (United States)

    Jang, WonJae; Kim, Junoh; Lee, Muyoung; Lee, Jooho; Bang, Yousung; Won, Yong Hyub

    2016-03-01

    Conventionally, poly (dimethylsiloxane) lens array is fabricated by replica molding. In this paper, we describe simple method for fabricating lens array with expanding property of PDMS. The PDMS substrate is prepared by spin coating on cleaned glass. After spin coating PDMS, substrate is treated with O2 plasma to promote adhesion between PDMS substrate and photoresist pattern on it. Positive photoresist az-4330 and AZ 430K developer is used for patterning on PDMS. General photolithography process is used to patterning. Then patterned PDMS substrate is dipped to 1- Bromododecane bath. During this process, patterned photoresist work as a barrier and prevent blocked PDMS substrate from reaction with 1-Bromododecane. Unblocked part of PDMS directly react with 1-Bromododecane and results in expanded PDMS volume. The expansion of PDMS is depends on absorbed 1-Bromododecane volume, dipping time and ratio of block to open area. The focal length of lens array is controlled by those PDMS expansion factors. Scale of patterned photoresist determine a diameter of each lens. The expansion occurs symmetrically at center of unblocked PDMS and 1-Bromododecane interface. As a result, the PDMS lens array is achieved by this process.

  15. Transferring Lens Prescriptions Between Lens-Design Programs

    Science.gov (United States)

    Stacy, John E.; Wooley, Laura; Carlin, Brian

    1989-01-01

    Optical Lens Prescription Data Formatter computer program enables user to transfer complicated lens prescriptions quickly and easily from one major optical-design program to another and back again. One can take advantage of inherent strength of either program. Programs are ACCOS V from Scientific Calculations, Inc., of Fishers, NY, and CODE V from Optical Research Associates of Pasadena, CA. VAX version written in FORTRAN.

  16. Connexin hemichannels in the lens

    Directory of Open Access Journals (Sweden)

    Eric C Beyer

    2014-02-01

    Full Text Available The normal function and survival of cells in the avascular lens is facilitated by intercellular communication through an extensive network of gap junctions formed predominantly by three connexins (Cx43, Cx46, and Cx50. In expression systems, these connexins can all induce hemi-channel currents, but other lens proteins (e.g., pannexin1 can also induce similar currents. Hemichannel currents have been detected in isolated lens fiber cells. These hemichannels may make significant contributions to normal lens physiology and pathophysiology. Studies of some connexin mutants linked to congenital cataracts have implicated hemichannels with aberrant voltage-dependent gating or modulation by divalent cations in disease pathogenesis. Hemichannels may also contribute to age- and disease-related cataracts.

  17. Gravitational lens surveys with LOFAR

    CERN Document Server

    Wucknitz, O

    2008-01-01

    Deep surveys planned as a Key Science Project of LOFAR provide completely new opportunities for gravitational lens searches. For the first time do large-scale surveys reach the resolution required for a direct selection of lens candidates using morphological criteria. We briefly describe the strategies that we will use to exploit this potential. The long baselines of an international E-LOFAR are essential for this project.

  18. Ascorbate in the ocular lens

    OpenAIRE

    Mody, Vino C. Jr

    2006-01-01

    Purpose: First, we intended to establish a method for sample preparation for measurement of ascorbate in whole rat and guinea pig lenses utilizing ultrafiltration and high performance liquid chromatography with ultraviolet radiation detection. Then, we aimed to investigate whether, in the albino rat, lens ascorbate concentration depends on solid dietary intake. Finally, we investigated if, in the pigmented guinea pig, lens ascorbate concentration may be elevated with drinkin...

  19. Phakic Intraocular lens- a review

    OpenAIRE

    Cruz, Francisco Miguel

    2015-01-01

    Introduction: Intraocular refractive procedures with the implantation of a Phakic Intraocular lens have become a safe efficient and predictable alternative for treating high ametropias when the use of corneal photoablative procedures is not possible. The implantation of Phakic intraocular lens preservs the accomodative function,is a reversable refractive procedure, with minimal induction of higher order aberrations compaed with corneal photoablative procedures. Methods: An analytical review o...

  20. A course in lens design

    CERN Document Server

    Velzel, Chris

    2014-01-01

    A Course in Lens Design is an instruction in the design of image-forming optical systems. It teaches how a satisfactory design can be obtained in a straightforward way. Theory is limited to a minimum, and used to support the practical design work. The book introduces geometrical optics, optical instruments and aberrations. It gives a description of the process of lens design and of the strategies used in this process. Half of its content is devoted to the design of sixteen types of lenses, described in detail from beginning to end. This book is different from most other books on lens design because it stresses the importance of the initial phases of the design process: (paraxial) lay-out and (thin-lens) pre-design. The argument for this change of accent is that in these phases much information can be obtained about the properties of the lens to be designed. This information can be used in later phases of the design. This makes A Course in Lens Design a useful self-study book, and a suitable basis for an intro...

  1. Hyperbolic metamaterial lens with hydrodynamic nonlocal response

    DEFF Research Database (Denmark)

    Yan, Wei; Mortensen, N. Asger; Wubs, Martijn

    2013-01-01

    in the local-response approximation and in the hydrodynamic Drude model can differ considerably. In particular, the optimal frequency for imaging in the nonlocal theory is blueshifted with respect to that in the local theory. Thus, to detect whether nonlocal response is at work in a hyperbolic metamaterial, we......We investigate the effects of hydrodynamic nonlocal response in hyperbolic metamaterials (HMMs), focusing on the experimentally realizable parameter regime where unit cells are much smaller than an optical wavelength but much larger than the wavelengths of the longitudinal pressure waves...... of the free-electron plasma in the metal constituents. We derive the nonlocal corrections to the effective material parameters analytically, and illustrate the noticeable nonlocal effects on the dispersion curves numerically. As an application, we find that the focusing characteristics of a HMM lens...

  2. The 2010 IODC lens design problem: the green lens

    Science.gov (United States)

    Juergens, Richard C.

    2010-08-01

    The lens design problem for the 2010 IODC is to design a 100 mm focal length lens in which every optical surface has the same radius of curvature, positive or negative, or is plano. The lens is used monochromatically at 532 nm and is made of only Schott N-BK7 glass. The goal of the problem is to maximize the product of the semi-field of view and the entrance pupil diameter while holding the distortion to within +/-5% and the RMS wavefront error to <= 0.07 wave within the field of view. There were 37 entries from eight different countries. Four different commercial lens design programs were used, along with two custom, in-house programs. The number of lens elements in the entries ranged from 3 to 64. The overall length of the lenses varied from 105 mm to 3.6 km. The winning entry had an entrance pupil diameter of 81.3 mm and a semi-field of view of 43.5° for a merit function product of 3537.

  3. Tinting of intraocular lens implants

    Energy Technology Data Exchange (ETDEWEB)

    Zigman, S.

    1982-06-01

    Intraocular lens (IOL) implants of polymethyl methacrylate (PMMA) lack an important yellow pigment useful as a filter in the visual process and in the protection of the retina from short-wavelength radiant energy. The ability to produce a yellow pigment in the PMMA used in IOL implants by exposure to near-ultraviolet (UV) light was tested. It was found that the highly cross-linked material in Copeland lens blanks was tinted slightly because of this exposure. The absorptive properties of lens blanks treated with near-UV light in this way approached that of the absorptive properties of human lenses. This finding shows that it is possible to alter IOL implants simply so as to induce a pale-yellow pigment in them to improve the visual process and to protect the retinas of IOL users.

  4. International rigid contact lens prescribing.

    Science.gov (United States)

    Efron, Nathan; Morgan, Philip B; Helland, Magne; Itoi, Motozumi; Jones, Deborah; Nichols, Jason J; van der Worp, Eef; Woods, Craig A

    2010-06-01

    Rigid lenses have been fitted less since the introduction of soft lenses nearly 40 years ago. Data that we have gathered from annual contact lens fitting surveys conducted in Australia, Canada, Japan, the Netherlands, Norway, the UK and the USA between 2000 and 2008 facilitate an accurate characterization of the pattern of the decline of rigid lens fitting during the first decade of this century. There is a trend for rigid lenses to be utilized primarily for refitting those patients who are already successful rigid lens wearers-most typically older females being refit with higher Dk materials. Rigid lenses are generally fitted on a full-time basis (four or more days of wear per week) without a planned replacement schedule. Orthokeratology is especially popular in the Netherlands, but is seldom prescribed in the other countries surveyed.

  5. The SNAP Strong Lens Survey

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, P.

    2005-01-03

    Basic considerations of lens detection and identification indicate that a wide field survey of the types planned for weak lensing and Type Ia SNe with SNAP are close to optimal for the optical detection of strong lenses. Such a ''piggy-back'' survey might be expected even pessimistically to provide a catalogue of a few thousand new strong lenses, with the numbers dominated by systems of faint blue galaxies lensed by foreground ellipticals. After sketching out our strategy for detecting and measuring these galaxy lenses using the SNAP images, we discuss some of the scientific applications of such a large sample of gravitational lenses: in particular we comment on the partition of information between lens structure, the source population properties and cosmology. Understanding this partitioning is key to assessing strong lens cosmography's value as a cosmological probe.

  6. Planar immersion lens with metasurfaces

    CERN Document Server

    Ho, John S; Tanabe, Yuji; Yeh, Alexander J; Fan, Shanhui; Poon, Ada S Y

    2015-01-01

    The solid immersion lens is a powerful optical tool that allows light entering material from air or vacuum to focus to a spot much smaller than the free-space wavelength. Conventionally, however, they rely on semispherical topographies and are non-planar and bulky, which limits their integration in many applications. Recently, there has been considerable interest in using planar structures, referred to as metasurfaces, to construct flat optical components for manipulating light in unusual ways. Here, we propose and demonstrate the concept of a planar immersion lens based on metasurfaces. The resulting planar device, when placed near an interface between air and dielectric material, can focus electromagnetic radiation incident from air to a spot in material smaller than the free-space wavelength. As an experimental demonstration, we fabricate an ultrathin and flexible microwave lens and further show that it achieves wireless energy transfer in material mimicking biological tissue.

  7. Algebraic Lens Distortion Model Estimation

    Directory of Open Access Journals (Sweden)

    Luis Alvarez

    2010-07-01

    Full Text Available A very important property of the usual pinhole model for camera projection is that 3D lines in the scene are projected to 2D lines. Unfortunately, wide-angle lenses (specially low-cost lenses may introduce a strong barrel distortion, which makes the usual pinhole model fail. Lens distortion models try to correct such distortion. We propose an algebraic approach to the estimation of the lens distortion parameters based on the rectification of lines in the image. Using the proposed method, the lens distortion parameters are obtained by minimizing a 4 total-degree polynomial in several variables. We perform numerical experiments using calibration patterns and real scenes to show the performance of the proposed method.

  8. Panoramic lens designed with transformation optics

    Science.gov (United States)

    Wang, Huaping; Deng, Yangyang; Zheng, Bin; Li, Rujiang; Jiang, Yuyu; Dehdashti, Shahram; Xu, Zhiwei; Chen, Hongsheng

    2017-01-01

    The panoramic lens is a special kind of lens, which is applied to observe full view. In this letter, we theoretically present a panoramic lens (PL) using transformation optics method. The lens is designed with inhomogeneous and anisotropic constitutive parameters, which has the ability to gather light from all directions and confine light within the visual angle of observer. Simulation results validate our theoretical design.

  9. SimpLens: Interactive gravitational lensing simulator

    Science.gov (United States)

    Saha, Prasenjit; Williams, Liliya L. R.

    2016-06-01

    SimpLens illustrates some of the theoretical ideas important in gravitational lensing in an interactive way. After setting parameters for elliptical mass distribution and external mass, SimpLens displays the mass profile and source position, the lens potential and image locations, and indicate the image magnifications and contours of virtual light-travel time. A lens profile can be made shallower or steeper with little change in the image positions and with only total magnification affected.

  10. In vivo human crystalline lens topography.

    Science.gov (United States)

    Ortiz, Sergio; Pérez-Merino, Pablo; Gambra, Enrique; de Castro, Alberto; Marcos, Susana

    2012-10-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye with known surfaces geometry and on a human lens in vitro, and demonstrated on three human lenses in vivo. Not correcting for distortion overestimated the anterior lens radius by 25% and the posterior lens radius by more than 65%. In vivo lens surfaces were fitted by biconicoids and Zernike polynomials after distortion correction. The anterior lens radii of curvature ranged from 10.27 to 14.14 mm, and the posterior lens radii of curvature ranged from 6.12 to 7.54 mm. Surface asphericities ranged from -0.04 to -1.96. The lens surfaces were well fitted by quadrics (with variation smaller than 2%, for 5-mm pupils), with low amounts of high order terms. Surface lens astigmatism was significant, with the anterior lens typically showing horizontal astigmatism ([Formula: see text] ranging from -11 to -1 µm) and the posterior lens showing vertical astigmatism ([Formula: see text] ranging from 6 to 10 µm).

  11. 21 CFR 886.3600 - Intraocular lens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens. 886.3600 Section 886.3600 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Prosthetic Devices § 886.3600 Intraocular lens. (a) Identification. An intraocular lens is a device made of materials...

  12. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus...

  13. Professoren og Ålen

    DEFF Research Database (Denmark)

    Poulsen, Bo

    2016-01-01

    Biolog og havforsker Johannes Schmidt regnes for at være Danmarks mest betydningsfulde havforsker gennem tiderne. Hans mange forskningsbaserede jordomsejlinger bragte ham til eksotiske egne og til opdagelsen af adskillige nye dyrearter. Dog blev særligt ålen og dens gydepladser et hovedfokus for ...

  14. The Ultrawideband Leaky Lens Antenna

    NARCIS (Netherlands)

    Bruni, S.; Neto, A.; Marliani, F.

    2007-01-01

    A novel directive and nondispersive antenna is presented: the ultrawideband (UWB) leaky lens. It is based on the broad band Cherenkov radiation occurring at a slot printed between different infinite homogeneous dielectrics. The first part of the paper presents the antenna concept and the UWB design.

  15. Estimation of the hybrid lens parameters through rigid gas permeable lens fitting

    OpenAIRE

    Hasani, Mohammadali; Hashemi, Hassan; Jafarzadehpur, Ebrahim; Yekta, Abbas Ali; Dadbin, Nooshin; khabazkhoob, Mehdi

    2016-01-01

    Purpose To estimate the fitting parameters of the hybrid contact lens in patients with corneal ectasia using the rigid gas permeable (RGP) lens. Methods Thirty-four eyes with corneal ectasia were evaluated in this study. The patients were examined once with the RGP lens and once with the hybrid contact lens. The relationship between the base curvature of the RGP and the vault of the hybrid lens and the correlation between their powers were analyzed. Results We found a linear relationship betw...

  16. Multifocal contact lens myopia control.

    Science.gov (United States)

    Walline, Jeffrey J; Greiner, Katie L; McVey, M Elizabeth; Jones-Jordan, Lisa A

    2013-11-01

    Previous studies on soft multifocal contact lens myopia control published in the peer-reviewed literature reported findings of noncommercial contact lenses worn for 1 year or less. This study sought to determine the progression of myopia and axial elongation of children fitted with commercially available distance center soft multifocal contact lenses for 2 years. Eight- to eleven-year-old children with -1.00 D to -6.00 D spherical component and less than 1.00 D astigmatism were fitted with soft multifocal contact lenses with a +2.00 D add (Proclear Multifocal "D"; CooperVision, Fairport, NY). They were age- and gender-matched to participants from a previous study who were fitted with single-vision contact lenses (1 Day Acuvue; Vistakon, Jacksonville, FL). A-scan ultrasound and cycloplegic autorefraction were performed at baseline, after 1 year, and after 2 years. Multilevel modeling was used to compare the rate of change of myopia and axial length between single-vision and soft multifocal contact lens wearers. Forty participants were fitted with soft multifocal contact lenses, and 13 did not contribute complete data (5 contributed 1 year of data). The adjusted mean ± standard error spherical equivalent progression of myopia at 2 years was -1.03 ± 0.06 D for the single-vision contact lens wearers and -0.51 ± 0.06 for the soft multifocal contact lens wearers (p < 0.0001). The adjusted mean axial elongation was 0.41 ± 0.03 and 0.29 ± 0.03 for the single-vision and soft multifocal contact lens wearers, respectively (p < 0.0016). Soft multifocal contact lens wear resulted in a 50% reduction in the progression of myopia and a 29% reduction in axial elongation during the 2-year treatment period compared to a historical control group. Results from this and other investigations indicate a need for a long-term randomized clinical trial to investigate the potential for soft multifocal contact lens myopia control.

  17. Lens stem cells may reside outside the lens capsule: an hypothesis

    Directory of Open Access Journals (Sweden)

    Meyer Rita A

    2007-06-01

    Full Text Available Abstract In this paper, we consider the ocular lens in the context of contemporary developments in biological ideas. We attempt to reconcile lens biology with stem cell concepts and a dearth of lens tumors. Historically, the lens has been viewed as a closed system, in which cells at the periphery of the lens epithelium differentiate into fiber cells. Theoretical considerations led us to question whether the intracapsular lens is indeed self-contained. Since stem cells generate tumors and the lens does not naturally develop tumors, we reasoned that lens stem cells may not be present within the capsule. We hypothesize that lens stem cells reside outside the lens capsule, in the nearby ciliary body. Our ideas challenge the existing lens biology paradigm. We begin our discussion with lens background information, in order to describe our lens stem cell hypothesis in the context of published data. Then we present the ciliary body as a possible source for lens stem cells, and conclude by comparing the ocular lens with the corneal epithelium.

  18. Exocytosis through the lens

    Directory of Open Access Journals (Sweden)

    Alicja eGraczyk

    2013-10-01

    Full Text Available Exocytosis, the process in which material is transported from the cell interior to the extracellular space, proceeds through a complex mechanism. Defects in this process are linked to a number of serious illnesses including diabetes, cancer and a range of neuropathologies. In neuroendocrine cells, exocytosis involves the fusion of secretory vesicles, carrying signalling molecules, with the plasma membrane through the coordinated interplay of proteins, lipids and small molecules. This process is highly regulated and occurs in a complex three-dimensional environment within the cell precisely coupled to the stimulus. The study of exocytosis poses significant challenges, involving rapidly changing, nano-scale, protein-protein and protein-lipid interactions, at specialised sites in the cell. Over the last decade our understanding of neuroendocrine exocytosis has been greatly enhanced by developments in fluorescence microscopy. Modern microscopy encompasses a toolbox of advanced techniques, pushing the limits of sensitivity and resolution, to probe different properties of exocytosis. In more recent years, the development of super-resolution microscopy techniques, side-stepping the limits of optical resolution imposed by the physical properties of light, have started to provide an unparalleled view of exocytosis. In this review we will discuss how advances in fluorescence microscopy are shedding light on the spatial and temporal organisation of the exocytotic machinery.

  19. Modern lens antennas for communications engineering

    CERN Document Server

    Thornton, John

    2012-01-01

    The aim of this book is to present the modern design principles and analysis of lens antennas. It gives graduates and RF/Microwave professionals the design insights in order to make full use of lens antennas.  Why do we want to write a book in lens antennas? Because this topic has not been thoroughly publicized, its importance is underestimated. As antennas play a key role in communication systems, recent development in wireless communications would indeed benefit from the characteristics of lens antennas: low profile, and low cost etc.  The major advantages of lens antennas are na

  20. Conjunctival impression cytology in contact lens wearers.

    Directory of Open Access Journals (Sweden)

    Simon Priya

    2002-01-01

    Full Text Available PURPOSE: To evaluate the cytological changes in conjunctiva following regular contact lens wear and to determine the correlation, if any, between severity of cytological alteration and symptoms related to contact lens wear. METHODS: One hundred eyes (50 normal asymptomatic subjects who served as a control group were studied by conjunctival impression cytology (CIC. These subjects were fitted with rigid gas permeable (RGP or soft contact lenses and were followed up at the end of 3 and 6 months. At each follow-up visit the CIC was repeated. A filter paper with the impression specimen was stained with periodic acid schiff (PAS and haematoxylin stain to study goblet cell loss. Papanicolaou stain was done to study squamous metaplasia. The cytological changes were graded using the system described by Natadisastra et al. RESULTS: Severity of cytological changes increased with the duration of contact lens wear (P = 0.00001. At the end of 6 months, 60% of symptomatic eyes wearing soft contact lens and RGP lens showed abnormal CIC changes. None of the asymptomatic RGP contact lens wearing eyes showed abnormal CIC changes whereas 33.4% of the asymptomatic soft contact lens wearing eyes showed abnormal CIC changes (P = 0.033. Epithelial changes occurred within 3-6 months of contact lens fitting. CONCLUSION: Severity of cytological changes increased with duration of lens wear (P = 0.00001. Prevalence and severity of cytological alteration is more in symptomatic contact lens wearers. Soft contact lens wearers although asymptomatic showed severe CIC changes.

  1. Study on Titanium Nitride Film Modified for Intraocular Lens

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Objective:To study the characteristics of the intraocular lens using ion beam sputtering depositing titanium nitride thin film on the intraocular lens(IOLs).Methods:To deposite titanium nitride thin film on the top of intraocular lens by ion beam sputtering depositing.We analyzed the surface morphology of intraocular lens through SEM and AFM.We detected intraocular lens resolution through the measurement of intraocular lens.Biocompatibility of intraocular lens is preliminary evaluated in this test.Results:T...

  2. Self-sustained focusing of high-density streaming plasma

    Science.gov (United States)

    Bugaev, A.; Dobrovolskiy, A.; Goncharov, A.; Gushenets, V.; Litovko, I.; Naiko, I.; Oks, E.

    2017-01-01

    We describe our observations of the transport through an electrostatic plasma lens of a wide-aperture, high-current, low energy, metal-ion plasma flow produced by a cathodic arc discharge. The lens input aperture was 80 mm, the length of the lens was 140 mm, and there were three electrostatic ring electrodes located in a magnetic field formed by permanent magnets. The lens outer electrodes were grounded and the central electrode was biased up to -3 kV. The plasma was a copper plasma with directed (streaming) ion energy 20-40 eV, and the equivalent ion current was up to several amperes depending on the potential applied to the central lens electrode. We find that when the central lens electrode is electrically floating, the current density of the plasma flow at the lens focus increases by up to 40%-50%, a result that is in good agreement with a theoretical treatment based on plasma-optical principles of magnetic insulation of electrons and equipotentialization along magnetic field lines. When the central lens electrode is biased negatively, an on-axis stream of energetic electrons is formed, which can also provide a mechanism for focusing of the plasma flow. Optical emission spectra under these conditions show an increase in intensity of lines corresponding to both copper atoms and singly charged copper ions, indicating the presence of fast electrons within the lens volume. These energetic electrons, as well as accumulating on-axis and providing ion focusing, can also assist in reducing the microdroplet component in the dense, low-temperature, metal plasma.

  3. Lens Coupled Quantum Cascade Laser

    Science.gov (United States)

    Hu, Qing (Inventor); Lee, Alan Wei Min (Inventor)

    2013-01-01

    Terahertz quantum cascade (QC) devices are disclosed that can operate, e.g., in a range of about 1 THz to about 10 THz. In some embodiments, QC lasers are disclosed in which an optical element (e.g., a lens) is coupled to an output facet of the laser's active region to enhance coupling of the lasing radiation from the active region to an external environment. In other embodiments, terahertz amplifier and tunable terahertz QC lasers are disclosed.

  4. Fresnel Lens with Embedded Vortices

    Directory of Open Access Journals (Sweden)

    Sunil Vyas

    2012-01-01

    Full Text Available Vortices of different charges are embedded in a wavefront that has quadratic phase variation, and the intensity distribution near the focal plane is studied. This method may be useful in realizing complicated beam profiles. We have experimentally demonstrated the generation of vortex arrays having integer as well as fractional topological charges that produce different intensity profiles at the focal plane. The phase variation realized on a spatial light modulator (SLM acts as a Fresnel lens with embedded vortices.

  5. Contact lens wear is intrinsically inflammatory.

    Science.gov (United States)

    Efron, Nathan

    2017-01-01

    Eye-care practitioners typically associate ocular inflammation during contact lens wear with serious complications such as microbial keratitis; however, more subtle mechanisms may be at play. This paper tests the notion that contact lens wear is intrinsically inflammatory by exploring whether uncomplicated contact lens wear meets the classical, clinical definition of inflammation - rubor (redness), calor (heat), tumor (swelling), dolor (pain) and functio laesa (loss of function) - as well as the contemporary, sub-clinical definition of inflammation (cellular and biochemical reactions). It is demonstrated that all of these clinical and sub-clinical criteria are met with hydrogel lens wear and most are met with silicone hydrogel lens wear, indicating that uncomplicated contact lens wear is intrinsically inflammatory. Consideration of both traditional and contemporary thinking about the role of inflammation in the human body leads to the perhaps surprising conclusion that the chronic, low grade, sub-clinical inflammatory status of the anterior eye during contact lens wear, which may be termed 'para-inflammation', is a positive, protective phenomenon, whereby up-regulation of the immune system, in a non-damaging way, maintains the eye in a state of 'heightened alert', ready to ward off any extrinsic noxious challenge. Characterisation of this inflammatory status may lead to the development of lens engineering or pharmacological strategies to modulate contact lens-induced inflammation, so as to render lens wear more safe and comfortable. © 2016 Optometry Australia.

  6. Evolution of a pre and post lens tear film with a contact lens

    Science.gov (United States)

    Gerhart, Matthew; Anderson, Daniel

    2012-11-01

    The work is the development, implementation, and analysis of a two-dimensional tear film model including a porous contact lens. The geometry of the problem is: a pre-lens layer that is a thin tear film between the outside air and contact lens, a contact lens that is a rigid but movable porous substrate, and a post-lens layer that is a thin film layer between the contact lens and the cornea. We are looking at short and long term behavior of the evolution of the thin film in the pre-lens layer coupled with the porous layer and the thin squeeze film in the post-lens layer. We model the different behaviors that arise as the Darcy number, evaporation effects, and boundary flux conditions change.

  7. Lateral shear interferometry with holo shear lens

    Science.gov (United States)

    Joenathan, C.; Mohanty, R. K.; Sirohi, R. S.

    1984-12-01

    A simple method for obtaining lateral shear using holo shear lenses (HSL) has been discussed. This simple device which produces lateral shears in the orthogonal directions has been used for lens testing. The holo shear lens is placed at or near the focus of the lens to be tested. It has also been shown that HSL can be used in speckle shear interferometry as it performs both the functions of shearing and imaging.

  8. An inverse and analytic lens design method

    OpenAIRE

    Lu, Yang; Lakshminarayanan, Vasudevan

    2016-01-01

    Traditional lens design is a numerical and forward process based on ray tracing and aberration theory. This method has limitations because the initial configuration of the lens has to be specified and the aberrations of the lenses have to considered. This paper is an initial attempt to investigate an analytic and inverse lens design method, called Lagrange, to overcome these barriers. Lagrange method tries to build differential equations in terms of the system parameters and the system input ...

  9. Algorithm design of liquid lens inspection system

    Science.gov (United States)

    Hsieh, Lu-Lin; Wang, Chun-Chieh

    2008-08-01

    In mobile lens domain, the glass lens is often to be applied in high-resolution requirement situation; but the glass zoom lens needs to be collocated with movable machinery and voice-coil motor, which usually arises some space limits in minimum design. In high level molding component technology development, the appearance of liquid lens has become the focus of mobile phone and digital camera companies. The liquid lens sets with solid optical lens and driving circuit has replaced the original components. As a result, the volume requirement is decreased to merely 50% of the original design. Besides, with the high focus adjusting speed, low energy requirement, high durability, and low-cost manufacturing process, the liquid lens shows advantages in the competitive market. In the past, authors only need to inspect the scrape defect made by external force for the glass lens. As to the liquid lens, authors need to inspect the state of four different structural layers due to the different design and structure. In this paper, authors apply machine vision and digital image processing technology to administer inspections in the particular layer according to the needs of users. According to our experiment results, the algorithm proposed can automatically delete non-focus background, extract the region of interest, find out and analyze the defects efficiently in the particular layer. In the future, authors will combine the algorithm of the system with automatic-focus technology to implement the inside inspection based on the product inspective demands.

  10. A Magnification Lens for Interactive Volume Visualization

    Energy Technology Data Exchange (ETDEWEB)

    LaMar, E; Hamann, B; Joy, K I

    2001-07-19

    Volume visualization of large data sets suffers from the same problem that many other visualization modalities suffer from: either one can visualize the entire data set and lose small details or visualize a small region and lose the context. In this paper, they present a magnification lens technique for volume visualization. While the notion of a magnification-lens is not new, and other techniques attempt to simulate the physical properties of a magnifying lens, their contribution is in developing a magnification lens that is fast, can be implemented using a fairly small software overhead, and has a natural, intuitive appearance. The issue with magnification lens is the border, or transition, region. The lens center and exterior have a constant zoom factor, and are simple to render. It is the border region that blends between the external and interior magnification, and has a non-constant magnification. They use the perspective-correct textures capability, available in most current graphics systems, to produce a lens with a tessellated border region that approximates linear compression with respect to the radius of the magnification lens. They discuss how a cubic border can mitigate the discontinuities resulting from the use of a linear function, without significant performance loss. They discuss various issues concerning development of a three-dimensional magnification lens.

  11. Trends of contact lens prescribing in Jordan.

    Science.gov (United States)

    Haddad, Mera F; Bakkar, May; Gammoh, Yazan; Morgan, Philip

    2016-10-01

    To evaluate contact lens prescribing trends among optometrists in Jordan. Optometrists from 173 practices in Jordan were surveyed about prescribing contact lenses in their practice. Practitioners were required to record information for the last 10 patients that visited their practice. Demographic data such as age and gender was obtained for each patient. In addition, data relating to lens type, lens design, replacement methods and the care regime advised to each patient were recorded. Practitioners were required to provide information relating to their education and years of experience. The influence of education and experience with respect to lens prescribing trends was explored using linear regression models for the proportions of lens types fitted for patients. A total of 1730 contact lens fits were analyzed. The mean (±SD) age of lens wearers was 26.6 (±7.9) years, of whom 65% were female. Conventional hydrogel lenses were the most prescribed lenses, accounting for 60.3% of the fits, followed by silicone hydrogel lenses (31.3%), and rigid lenses (8.4%). In terms of lens design, spherical lenses appeared to be most commonly prescribed on monthly basis. Daily disposable lenses were second most prescribed lens modality, accounting for 20.4% of the study sample. Multi-purpose solution (MPS) was the preferred care regimen, with a prevalence of 88.1% reported in the study sample, compared to hydrogen peroxide (1-step and 2-step), which represented only 2.8% of the patients in this study. A relationship was established between the two educational groups for rigid lens prescribing (F=17.4, ptrends among optometrists in Jordan. Contact lens prescribing in terms of lens type, lens design, modality of wear and care regimen agree with global market trends with small variations. This report will help practitioners and the industry to detect any deficiencies in the contact lens market in Jordan, which will ease implementing current and future plans in developing contact

  12. Coculture with intraocular lens material-activated macrophages induces an inflammatory phenotype in lens epithelial cells.

    Science.gov (United States)

    Pintwala, Robert; Postnikoff, Cameron; Molladavoodi, Sara; Gorbet, Maud

    2015-03-01

    Cataracts are the leading cause of blindness worldwide, requiring surgical implantation of an intraocular lens. Despite evidence of leukocyte ingress into the postoperative lens, few studies have investigated the leukocyte response to intraocular lens materials. A novel coculture model was developed to examine macrophage activation by hydrophilic acrylic (poly(2-hydroxyethyl methacrylate)) and hydrophobic acrylic (polymethylmethacrylate) commercial intraocular lens. The human monocytic cell line THP-1 was differentiated into macrophages and cocultured with human lens epithelial cell line (HLE-B3) with or without an intraocular lens for one, two, four, or six days. Using flow cytometry and confocal microscopy, expression of the macrophage activation marker CD54 (intercellular adhesion molecule-1) and production of reactive oxygen species via the fluorogenic probe 2',7'-dichlorodihydrofluorescein diacetate were examined in macrophages. α-Smooth muscle actin, a transdifferentiation marker, was characterized in lens epithelial cells. The poly(2-hydroxyethyl methacrylate) intraocular lens prevented adhesion but induced significant macrophage activation (p intraocular lens), while the polymethylmethacrylate intraocular lens enabled adhesion and multinucleated fusion, but induced no significant activation. Coculture with either intraocular lens increased reactive oxygen species production in macrophages after one day (p intraocular lens, with hydrophilic surfaces inducing higher activation than hydrophobic surfaces. These findings provide a new method of inquiry into uveal biocompatibility, specifically through the quantification of cell-surface markers of leukocyte activation.

  13. Paediatric intraocular lens implants: accuracy of lens power calculations.

    Science.gov (United States)

    O'Gallagher, M K; Lagan, M A; Mulholland, C P; Parker, M; McGinnity, G; McLoone, E M

    2016-09-01

    PurposeThis study aims to evaluate the accuracy of lens prediction formulae on a paediatric population.MethodsA retrospective case-note review was undertaken of patients under 8 years old who underwent cataract surgery with primary lens implantation in a regional referral centre for paediatric ophthalmology, excluding those whose procedure was secondary to trauma. Biometric and refractive data were analysed for 43 eyes, including prediction errors (PE). Statistical measures used included mean absolute error (MAE), median absolute error (MedAE), Student's t-test and Lin's correlation coefficient.ResultsThe mean PE using the SRK-II formula was +0.96 D (range -2.47D to +2.41 D, SD 1.33 D, MAE 1.38 D, MedAE 1.55, n=15). The mean PE was smaller using SRK/T (-0.18 D, range -3.25 D to +3.95 D, SD 1.70 D, MAE 1.30 D, MedAE 1.24, n=27). We performed an analysis of the biometry data using four different formula (Hoffer Q, Holladay 1, SRK-II and SRK/T). Hoffer Q showed a smaller MedAE than other formulae but also a myopic bias.ConclusionOur clinical data suggest SRK/T was more accurate in predicting post-operative refraction in this cohort of paediatric patients undergoing cataract surgery. Hoffer Q may have improved accuracy further.

  14. Flat lens for seismic waves

    CERN Document Server

    Brule, Stephane; Guenneau, Sebastien

    2016-01-01

    A prerequisite for achieving seismic invisibility is to demonstrate the ability of civil engineers to control seismic waves with artificially structured soils. We carry out large-scale field tests with a structured soil made of a grid consisting of cylindrical and vertical holes in the ground and a low frequency artificial source (< 10 Hz). This allows the identification of a distribution of energy inside the grid, which can be interpreted as the consequence of an effective negative refraction index. Such a flat lens reminiscent of what Veselago and Pendry envisioned for light opens avenues in seismic metamaterials to counteract the most devastating components of seismic signals.

  15. Atom lens without chromatic aberrations

    CERN Document Server

    Efremov, Maxim A; Schleich, Wolfgang P

    2012-01-01

    We propose a lens for atoms with reduced chromatic aberrations and calculate its focal length and spot size. In our scheme a two-level atom interacts with a near-resonant standing light wave formed by two running waves of slightly different wave vectors, and a far-detuned running wave propagating perpendicular to the standing wave. We show that within the Raman-Nath approximation and for an adiabatically slow atom-light interaction, the phase acquired by the atom is independent of the incident atomic velocity.

  16. Intraocular lens with accommodation capacity

    OpenAIRE

    Dorronsoro, Carlos; Alejandre, Nicolás; Bekesi, Nandor; Marcos, Susana

    2014-01-01

    Intraocular lens with accommodation capacity comprising a first optical member (1) having a dynamic optical power, to which a second optical member (2) with a fixed optical power is affixed, in such a manner that at least a central part of each of one of one of the curved surfaces (2a, 2b) of the second optical member (2) and of at least one of the surfaces (1a, 1b) of the first optical member (1) are in contact with each other, the second optical member (2) and the first optical member (1) p...

  17. Gravitational lensing by compact objects within plasma

    CERN Document Server

    Rogers, Adam

    2016-01-01

    Frequency-dependent gravitational lens effects are found for trajectories of electromagnetic rays passing through a distribution of plasma near a massive object. Ray propagation through plasma adds extra terms to the equations of motion that depend on the plasma refractive index. For low-frequency rays these refractive effects can dominate, turning the gravitational lens into a mirror. While light rays behave like particles with an effective mass given by the plasma frequency in a medium with constant density, an inhomogeneous plasma introduces more complicated behavior even for the spherically symmetric case. As a physical example, the pulse profile of a compact object sheathed in a dense plasma is examined, which introduces dramatic frequency-dependent shifts from the behavior in vacuum.

  18. Contact lens intolerance: refitting with dual axis lens for corneal refractive therapy

    Science.gov (United States)

    López-López, María; Pelegrín-Sánchez, José Miguel; Sobrado-Calvo, Paloma; García-Ayuso, Diego

    2011-01-01

    Corneal refractive therapy is a non-surgical procedure whose main purpose is to improve uncorrected visual acuity during the day, without spectacles or contact lenses. We report an adult woman who shows contact lens intolerance and does not want to wear eyeglasses. We used dual axis contact lens to improve lens centration. We demonstrate a maintained unaided visual acuity during one year of treatment. In conclusion, we can consider refitting with dual axis lens for corneal refractive therapy as a non-surgical option for patients who show contact lens intolerance.

  19. Fabricating customized hydrogel contact lens

    Science.gov (United States)

    Childs, Andre; Li, Hao; Lewittes, Daniella M.; Dong, Biqin; Liu, Wenzhong; Shu, Xiao; Sun, Cheng; Zhang, Hao F.

    2016-10-01

    Contact lenses are increasingly used in laboratories for in vivo animal retinal imaging and pre-clinical studies. The lens shapes often need modification to optimally fit corneas of individual test subjects. However, the choices from commercially available contact lenses are rather limited. Here, we report a flexible method to fabricate customized hydrogel contact lenses. We showed that the fabricated hydrogel is highly transparent, with refractive indices ranging from 1.42 to 1.45 in the spectra range from 400 nm to 800 nm. The Young’s modulus (1.47 MPa) and hydrophobicity (with a sessile drop contact angle of 40.5°) have also been characterized experimentally. Retinal imaging using optical coherence tomography in rats wearing our customized contact lenses has the quality comparable to the control case without the contact lens. Our method could significantly reduce the cost and the lead time for fabricating soft contact lenses with customized shapes, and benefit the laboratorial-used contact lenses in pre-clinical studies.

  20. Liquid lens using acoustic radiation force.

    Science.gov (United States)

    Koyama, Daisuke; Isago, Ryoichi; Nakamura, Kentaro

    2011-03-01

    A liquid lens is proposed that uses acoustic radiation force with no mechanical moving parts. It consists of a cylindrical acrylic cell filled with two immiscible liquids (degassed water and silicone oil) and a concave ultrasound transducer. The focal point of the transducer is located on the oil-water interface, which functions as a lens. The acoustic radiation force is generated when there is a difference in the acoustic energy densities of different media. An acoustic standing wave was generated in the axial direction of the lens and the variation of the shape of the oil-water interface was observed by optical coherence tomography (OCT). The lens profile can be rapidly changed by varying the acoustic radiation force from the transducer. The kinematic viscosity of silicone oil was optimized to minimize the response times of the lens. Response times of 40 and 80 ms when switching ultrasonic radiation on and off were obtained with a kinematic viscosity of 200 cSt. The path of a laser beam transmitted through the lens was calculated by ray-tracing simulations based on the experimental results obtained by OCT. The transmitted laser beam could be focused by applying an input voltage. The liquid lens could be operated as a variable-focus lens by varying the input voltage.

  1. Metasurface lens: Shrinking the camera size

    Science.gov (United States)

    Sun, Cheng

    2017-01-01

    A miniaturized camera has been developed by integrating a planar metasurface lens doublet with a CMOS image sensor. The metasurface lens doublet corrects the monochromatic aberration and thus delivers nearly diffraction-limited image quality over a wide field of view.

  2. Managing as designing with a positive lens

    NARCIS (Netherlands)

    Avital, M.; Boland, R.J.; Avital, M.; Boland, R.J.; Cooperrider, D.L.

    2007-01-01

    The role and potential contribution of a positive lens to the design of systems and organizations is the focus of this essay. The positive lens refers to an emerging perspective in the social sciences that emphasizes a positive stance toward our capacity to construct better organizations and technol

  3. Optimization of Zoom Lens with Discrete State of Liquid Lens Elements by Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Cheng-Mu Tsai

    2015-01-01

    Full Text Available This paper is to employ liquid lens elements to design a lens with zoom function by using the genetic algorithm (GA optimization. The liquid lens elements used in the proposal can apply voltage adjustment to generate the electrical field that induces the liquid with electric conductivity to vary the surface curvature between two different kinds of liquids. According to the voltage level, the liquid lens element makes the discrete variation of the curvature and thickness realize the zoom function without moving the lens groups so that the overall length can be reduced. However, it is difficult to design the zoom lens under the discrete variation of the curvature and thickness in the liquid lens elements and the mechanical space that is constantly limited. The GA offers a flexible way for lens optimization. We regarded the spot size as the fitness function to look for the optimum curvatures, thickness, and the corresponding statuses of liquid lens elements for the zoom lens. As a result, the zoom lens with constant space can be realized by running the selection, crossover, and mutation operation in the GA optimization.

  4. Bacterial assay of contact lens wearers.

    Science.gov (United States)

    Hart, D E; Hosmer, M; Georgescu, M; Farris, R L

    1996-03-01

    The goal of the project was to determine the quantity of bacteria on the contact lens and adjacent areas of the eye. This paper is a quantitative study of the contact lens and ocular aerobic microbiota in a mixed group of daily and extended wear disposable contact lens users. The contact lens, the lower fornix, tears collecting at the lower fornix, and edge of the lower lid at the Meibomian gland margin were assayed for the quantity of bacterial colony forming units (CFU). Eighteen patients wearing 49 disposable high water content hydrogel contact lenses were assayed and the mean lens age was 8.8 +/- 4.6 days. Three patients wore their lenses on a daily wear basis and 15 on an extended wear schedule. Tear samples were obtained with sterile microbial loops and the lens was macerated into small particles with a tissue grinder. The samples were poured onto the surface of chocolate agar plates and incubated at 35 degrees C for 48 h in 5% Co2. The lid margin revealed the greatest bacterial presence (mean = 9.7 CFU; median = 2 CFU; mode = 0 CFU). The lens showed the next greatest presence of CFU (mean = 4.5 CFU; median = 1 CFU; mode = 0). The fornix and tears revealed the least bacterial presence (fornix: mean = 2.6 CFU; median = 0 CFU; mode = 0 CFU). The bacteria were coagulase-negative staphylococci. The bacterial assay of disposable lens wearing contact lens subjects indicates that the lid margins are the greatest source of bacteria with the tears being the lowest. These studies support the concept that in the eye, the lens typically does not possess a large number of bacteria under normal conditions.

  5. Surface PEGylation of intraocular lens for PCO prevention: An in vivo evaluation.

    Science.gov (United States)

    Xu, Xu; Tang, Jun-Mei; Han, Yue-Mei; Wang, Wei; Chen, Hao; Lin, Quan-Kui

    2016-07-01

    Posterior capsular opacification (PCO) is a common complication in cataract surgery. The development of PCO is attributed to the combination of adhesion, migration, proliferation, and transdifferentiation of the residual lens epithelial cells (LEC) onto the interface of intraocular lens (IOL) material and lens posterior, in which the initial adhesion is the beginning step and plays important roles. In the present study, hydrophilic polyethylene glycol (PEG) was immobilized onto IOL surface via plasma-aided chemical grafting procedure. The attenuated total reflection - Fourier transform infrared (ATR-FTIR) and contact angle (CA) - measurements indicate the successful surface PEGylation, as well as the excellent hydrophilicity of the surfaces. Compared with pristine IOL, the PEGylation does not influent its optical property, whereas the initial adhesion of LEC is greatly inhibited. In vivo ocular implantation results show that the PEGylated IOL presents good in vivo biocompatibility, and can effectively prevent the PCO development.

  6. Steady-State Diffusion of Water through Soft-Contact LensMaterials

    Energy Technology Data Exchange (ETDEWEB)

    Fornasiero, Francesco; Krull, Florian; Radke, Clayton J.; Prausnitz, JohnM.

    2005-01-31

    Water transport through soft contact lenses (SCL) is important for acceptable performance on the human eye. Chemical-potential gradient-driven diffusion rates of water through soft-contact-lens materials are measured with an evaporation-cell technique. Water is evaporated from the bottom surface of a lens membrane by impinging air at controlled flow rate and humidity. The resulting weight loss of a water reservoir covering the top surface of the contact-lens material is recorded as a function of time. New results are reported for a conventional hydrogel material (SofLens{trademark} One Day, hilafilcon A, water content at saturation W{sub 10} = 70 weight %) and a silicone hydrogel material (PureVision{trademark}, balafilcon A, W{sub 10} = 36 %), with and without surface oxygen plasma treatment. Also, previously reported data for a conventional HEMA-SCL (W{sub 10} = 38 %) hydrogel are reexamined and compared with those for SofLens{trademark} One Day and PureVision{trademark} hydrogels. Measured steady-state water fluxes are largest for SofLens{trademark} One Day, followed by PureVision{trademark} and HEMA. In some cases, the measured steady-state water fluxes increase with rising relative air humidity. This increase, due to an apparent mass-transfer resistance at the surface (trapping skinning), is associated with formation of a glassy skin at the air/membrane interface when the relative humidity is below 55-75%. Steady-state water-fluxes are interpreted through an extended Maxwell-Stefan diffusion model for a mixture of species starkly different in size. Thermodynamic nonideality is considered through Flory-Rehner polymer-solution theory. Shrinking/swelling is self-consistently modeled by conservation of the total polymer mass. Fitted Maxwell-Stefan diffusivities increase significantly with water concentration in the contact lens.

  7. Conjugate metamaterials and the perfect lens

    CERN Document Server

    Xu, Yadong; Xu, Lin; Chen, Huanyang

    2015-01-01

    In this letter, we show how transformation optics makes it possible to design what we call conjugate metamaterials. We show that these materials can also serve as substrates for making a subwavelength-resolution lens. The so-called "perfect lens", which is a lens that could focus all components of light (including propagating and evanescent waves), can be regarded as a limiting case, in which the respective conjugate metamaterials approach the characteristics of left-handed metamaterials, which have a negative refractive index.

  8. PMMA lens with high efficiency and reliability

    Science.gov (United States)

    Matsuzaki, Ichiro; Abe, Koji; Fujita, Katsuhiro

    2013-09-01

    Polymethyl Methacrylate (PMMA) Fresnel lenses are increasingly being used in concentrated photovoltaic (CPV) systems installed outdoors and, accordingly, emphasis is being placed on the durability of such lenses with regard to light transmittance when subject to ultraviolet (UV) light and dust exposure. Accelerated testing methods for evaluating durability under UV exposure were established, allowing development of a lens material with improved UV resistance. Simultaneously, through a proprietary molding method, a Fresnel lens that boasts favorable light concentration efficiency with little deformation even after prolonged outdoor use was developed. Moreover, the lens incorporates a new hard-coat finish that possesses sand durability and UV resistance comparable to that of tempered glass.

  9. Plasma Lens for High Flux X-Ray Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Shlyaptsev, V N; Toor, A; Tatchyn, R O

    2001-12-17

    We have developed the Scaled Thermal Explosion Experiment (STEX) to provide a database of reaction violence from thermal explosion for explosives of interest. Such data are needed to develop, calibrate, and validate predictive capability for thermal explosions using simulation computer codes. A cylinder of explosive 25, 50 or 100 mm in diameter, is confined in a steel cylinder with heavy end caps, and heated under controlled conditions until reaction. Reaction violence is quantified through non-contact micropower impulse radar measurements of the cylinder wall velocity and by strain gauge data at reaction onset. Here we describe the test concept, design and diagnostic recording, and report results with HMX- and RDX-based energetic materials.

  10. Bionic intraocular lens with variable focus and integrated structure

    Science.gov (United States)

    Liang, Dan; Wang, Xuan-Yin; Du, Jia-Wei; Xiang, Ke

    2015-10-01

    This paper proposes a bionic accommodating intraocular lens (IOL) for ophthalmic surgery. The designed lens has a solid-liquid mixed integrated structure, which mainly consists of a support ring, elastic membrane, rigid lens, and optical liquid. The lens focus can be adjusted through the deformation of the lens front surface when compressed. The integrated structure of the IOL is presented, as well as a detailed description of the lens materials and fabrication process. Images under different radial pressures are captured, and the lens deformation process, accommodating range, density, and optical property are analyzed. The designed lens achieves a 14.6 D accommodating range under a radial pressure of 51.4 mN and a 0.24 mm alteration of the lens outer radius. The deformation property of the lens matches well with the characteristic of the eye and shows the potential to help patients fully recover their vision accommodation ability after the cataract surgery.

  11. Restoring lens capsule integrity enhances lens regeneration in New Zealand albino rabbits and cats.

    Science.gov (United States)

    Gwon, A; Gruber, L J; Mantras, C

    1993-11-01

    In studies conducted by numerous investigators for 150 years, lenses regenerated following endocapsular lens extraction in New Zealand albino rabbits have been irregular in shape, appearing primarily doughnut-shaped as a result of lack of lens growth at the site of the anterior capsulotomy and its adhesion to the posterior capsule. In the present study, we restored the lens capsule integrity by inserting a collagen patch at the time of surgery to seal the anterior capsulotomy and to improve the shape and structure of the regenerated lenses. We then filled the capsule bag with air to prevent adhesions between the anterior and posterior capsule and maintain capsule tautness and shape. Lens regeneration was first noted as early as one to two weeks. Regenerated lens filled approximately 50% of the capsule bag at two weeks and 100% by five weeks. Subsequent growth was in the anterior-posterior direction and measured by A-scan biometry. Lens thickness increased by 0.3 mm per month. The regenerated lenses were spherical with normal cortical structure and a nuclear opacity. In conclusion, restoration of lens capsular integrity with a collagen patch following endocapsular lens extraction enhanced the shape, structure, and growth rate of the regenerated lenses. In addition, lens regeneration was shown to occur in two cats.

  12. Conjunctival Microbiome Changes Associated With Soft Contact Lens and Orthokeratology Lens Wearing.

    Science.gov (United States)

    Zhang, Haikun; Zhao, Fuxin; Hutchinson, Diane S; Sun, Wenfeng; Ajami, Nadim J; Lai, Shujuan; Wong, Matthew C; Petrosino, Joseph F; Fang, Jianhuo; Jiang, Jun; Chen, Wei; Reinach, Peter S; Qu, Jia; Zeng, Changqing; Zhang, Dake; Zhou, Xiangtian

    2017-01-01

    Usage of different types of contact lenses is associated with increased risk of sight-threatening complications. Changes in the ocular microbiome caused by contact lens wear are suggested to affect infection development in those individuals. To address this question, this study compares conjunctival microbial communities in contact lens wearers with those in noncontact lens wearers. Paired-end sequencing of the V3 region of the 16S rRNA gene was used to characterize the bacterial communities on the conjunctival surfaces of contact lens wearers and nonwearers. No differences in microbial diversity were detected between contact lens wearers and nonwearers. Nevertheless, some slight microbe variability was evident between these two different groups. Bacillus, Tatumella and Lactobacillus abundance was less in orthokeratology lens (OKL) wearers than in nonwearers. In soft contact lenses (SCL) wearers, Delftia abundance decreased whereas Elizabethkingia levels increased. The difference in the SCL and nonwearer group was smaller than that in the OKL group. Variations in the conjunctival taxonomic composition between SCL wearers were larger than those in other groups. Sex differences in the conjunctival microbiota makeup were only evident among nonwearers. Even though there were slight percentage changes between contact lens wearers and nonwearers in some microbes, there were no differences in their diversity. On the other hand, contact lens usage might cause relative abundance of some taxa to change. Our results will help assess whether or not conjunctival microbiome changes caused by contact lens wear affect infection risk.

  13. Variable-focus cylindrical liquid lens array

    Science.gov (United States)

    Zhao, Wu-xiang; Liang, Dong; Zhang, Jie; Liu, Chao; Zang, Shang-fei; Wang, Qiong-hua

    2013-06-01

    A variable-focus cylindrical liquid lens array based on two transparent liquids of different refractive index is demonstrated. An elastic membrane divides a transparent reservoir into two chambers. The two chambers are filled with liquid 1 and liquid 2, respectively, which are of different refractive index. The micro-clapboards help liquid 1, liquid 2 and the elastic membrane form a cylindrical lens array. Driving these two liquids to flow can change the shape of the elastic membrane as well as the focal length. In this design, the gravity effect of liquid can be overcome. A demo lens array of positive optical power is developed and tested. Moreover, a potential application of the proposed lens array for autostereoscopic 3D displays is emphasized.

  14. Role of Aquaporin 0 in lens biomechanics

    Energy Technology Data Exchange (ETDEWEB)

    Sindhu Kumari, S.; Gupta, Neha [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); Shiels, Alan [Washington University School of Medicine, St. Louis, MO (United States); FitzGerald, Paul G. [Cell Biology and Human Anatomy, School of Medicine, University of California, Davis, CA (United States); Menon, Anil G. [University of Cincinnati College of Medicine, Cincinnati, OH (United States); Mathias, Richard T. [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States); Varadaraj, Kulandaiappan, E-mail: kulandaiappan.varadaraj@stonybrook.edu [Physiology and Biophysics, Stony Brook University, Stony Brook, NY (United States); SUNY Eye Institute, NY (United States)

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5{sup −/−}), AQP0 KO (heterozygous KO: AQP0{sup +/−}; homozygous KO: AQP0{sup −/−}; all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0{sup +/−} lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and

  15. Ensuring Safe Use of Contact Lens Solution

    Science.gov (United States)

    ... evaluating contact lens solutions and the development of Acanthamoeba keratitis, a rare but serious eye infection that's ... contact lenses to water has been associated with Acanthamoeba keratitis, a corneal infection that is resistant to ...

  16. Role of Aquaporin 0 in lens biomechanics.

    Science.gov (United States)

    Sindhu Kumari, S; Gupta, Neha; Shiels, Alan; FitzGerald, Paul G; Menon, Anil G; Mathias, Richard T; Varadaraj, Kulandaiappan

    2015-07-10

    Maintenance of proper biomechanics of the eye lens is important for its structural integrity and for the process of accommodation to focus near and far objects. Several studies have shown that specialized cytoskeletal systems such as the beaded filament (BF) and spectrin-actin networks contribute to mammalian lens biomechanics; mutations or deletion in these proteins alters lens biomechanics. Aquaporin 0 (AQP0), which constitutes ∼45% of the total membrane proteins of lens fiber cells, has been shown to function as a water channel and a structural cell-to-cell adhesion (CTCA) protein. Our recent ex vivo study on AQP0 knockout (AQP0 KO) mouse lenses showed the CTCA function of AQP0 could be crucial for establishing the refractive index gradient. However, biomechanical studies on the role of AQP0 are lacking. The present investigation used wild type (WT), AQP5 KO (AQP5(-/-)), AQP0 KO (heterozygous KO: AQP0(+/-); homozygous KO: AQP0(-/-); all in C57BL/6J) and WT-FVB/N mouse lenses to learn more about the role of fiber cell AQPs in lens biomechanics. Electron microscopic images exhibited decreases in lens fiber cell compaction and increases in extracellular space due to deletion of even one allele of AQP0. Biomechanical assay revealed that loss of one or both alleles of AQP0 caused a significant reduction in the compressive load-bearing capacity of the lenses compared to WT lenses. Conversely, loss of AQP5 did not alter the lens load-bearing ability. Compressive load-bearing at the suture area of AQP0(+/-) lenses showed easy separation while WT lens suture remained intact. These data from KO mouse lenses in conjunction with previous studies on lens-specific BF proteins (CP49 and filensin) suggest that AQP0 and BF proteins could act co-operatively in establishing normal lens biomechanics. We hypothesize that AQP0, with its prolific expression at the fiber cell membrane, could provide anchorage for cytoskeletal structures like BFs and together they help to confer

  17. Veselago lens by photonic hyper-crystals

    CERN Document Server

    Huang, Zun

    2014-01-01

    An imaging system functioning as a Veselago lens has been proposed based on the novel concept of photonic "hyper-crystal" -- an artificial optical medium synthesizing the properties of hyperbolic materials and photonic crystals. This Veselago lens shows a nearly constant negative refractive index and substantially reduced image aberrations. It can find potential applications in photolithography and hot-spots detection of silicon-based integrated circuits.

  18. Lens Design Using Group Indices of Refraction

    Science.gov (United States)

    Vaughan, A. H.

    1995-01-01

    An approach to lens design is described in which the ratio of the group velocity to the speed of light (the group index) in glass is used, in conjunction with the more familiar phase index of refraction, to control certain chromatic properties of a system of thin lenses in contact. The first-order design of thin-lens systems is illustrated by examples incorporating the methods described.

  19. In vivo human crystalline lens topography

    OpenAIRE

    Ortiz, Sergio; Pérez Merino, Pablo; Gambra, Enrique; Castro, Alberto; Marcos, Susana

    2012-01-01

    Custom high-resolution high-speed anterior segment spectral domain optical coherence tomography (OCT) was used to characterize three-dimensionally (3-D) the human crystalline lens in vivo. The system was provided with custom algorithms for denoising and segmentation of the images, as well as for fan (scanning) and optical (refraction) distortion correction, to provide fully quantitative images of the anterior and posterior crystalline lens surfaces. The method was tested on an artificial eye ...

  20. Environmental standards for intraocular lens implantation.

    Science.gov (United States)

    Crawford, B A; Kaufman, D V

    1984-02-01

    Successful implantation of prosthetic devices depends upon their freedom from postoperative inflammation and infection. Techniques and lessons learned in orthopaedic and other implant surgery should be applied to intraocular lens implantation. The avoidance of contamination by particles and micro-organisms is one essential principle of the surgical procedure. Practical steps are described to reduce both types of contamination. These measures taken together are recommended for adoption as a standard of environmental safety for lens implantation.

  1. A Spectrometer Based on Diffractive Lens

    Institute of Scientific and Technical Information of China (English)

    WANG Daoyi; YAN Yingbai; JIN Guofan; WU Minxian

    2001-01-01

    A novel spectrometer is designed based on diffractive lens. It is essentially a flat field spectrometer. All the focal points are along the optical axis. Besides, all the asymmetrical aberrations vanish in our mounting. Thus low aberration can be obtained. In this article a diffractive lens is modeled as a special grating and analyzed by using a grating-based method. And a stigmatic point is introduced to reduce the aberrations.

  2. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    OpenAIRE

    Elena Bonafonte Marquez; Sergio Bonafonte Royo

    2015-01-01

    We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL) implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for i...

  3. Introduction to the development of intraocular lens

    Science.gov (United States)

    Li, Yifan; Peng, Runling; Hu, Shuilan; Wei, Maowei; Chen, Jiabi

    2013-08-01

    In order to cure the cataract disease or injuries in eyes, intraocular lens(IOL) has been studied all the time to replace the crystalline lens in human eyes. Researches on IOL are started early from 19th century, and it develops greatly in the hundreds years after. This article introduces several main kinds of IOLs that appear in the development history of IOL, and raises the double-liquid zoom IOL based on electrowetting, which will be the trend of IOL study.

  4. Evolution and the Calcite Eye Lens

    CERN Document Server

    Williams, Vernon L

    2013-01-01

    Calcite is a uniaxial, birefringent crystal, which in its optically transparent form, has been used for animal eye lenses, the trilobite being one such animal. Because of the calcite birefringence there is a difficulty in using calcite as a lens. When the propagation direction of incoming light is not exactly on the c-axis, the mages blur. In this paper, calcite blurring is evaluated, and the non-blurring by a crystallin eye lens is compared to a calcite one.

  5. A correlation of thin lens approximation to thick lens design by using context based method in optics education

    Science.gov (United States)

    Farsakoglu, O. F.; Inal Atik, Ipek; Kocabas, Hikmet

    2014-07-01

    The effect of Coddington factors on aberration functions has been analysed using thin lens approximation with optical glass parameters. The dependence of spherical aberration on Coddington shape factor for the various optical glasses in real lens design was discussed using exact ray tracing for the optics education and training purposes. Thin lens approximation and thick lens design are generally taught with only lecturing method. But, thick lens design is closely related to the real life. Hence, it is more appropriate to teach thin lens approximation and thick lens design with real-life context based approach. Context based teaching can be effective in solving problems in which the subject is very difficult and irrelevant. It also provides extensive evidence for optics education that students are generally unable to correctly apply the concepts of lens design to optical instruments currently used. Therefore, the outline of real-life context based thick lens design lessons were proposed and explained in detail considering thin lens approximation.

  6. Photon nanojet lens: design, fabrication and characterization

    Science.gov (United States)

    Xu, Chen; Zhang, Sichao; Shao, Jinhai; Lu, Bing-Rui; Mehfuz, Reyad; Drakeley, Stacey; Huang, Fumin; Chen, Yifang

    2016-04-01

    In this paper, a novel nanolens with super resolution, based on the photon nanojet effect through dielectric nanostructures in visible wavelengths, is proposed. The nanolens is made from plastic SU-8, consisting of parallel semi-cylinders in an array. This paper focuses on the lens designed by numerical simulation with the finite-difference time domain method and nanofabrication of the lens by grayscale electron beam lithography combined with a casting/bonding/lift-off transfer process. Monte Carlo simulation for injected charge distribution and development modeling was applied to define the resultant 3D profile in PMMA as the template for the lens shape. After the casting/bonding/lift-off process, the fabricated nanolens in SU-8 has the desired lens shape, very close to that of PMMA, indicating that the pattern transfer process developed in this work can be reliably applied not only for the fabrication of the lens but also for other 3D nanopatterns in general. The light distribution through the lens near its surface was initially characterized by a scanning near-field optical microscope, showing a well defined focusing image of designed grating lines. Such focusing function supports the great prospects of developing a novel nanolithography based on the photon nanojet effect.

  7. Lens Biology is a Dimension of Neurobiology.

    Science.gov (United States)

    Frederikse, Peter; Kasinathan, Chinnaswamy

    2017-02-04

    There is a second cell type in your body that expresses scores of the most intensively studied genes in neuroscience and exclusively shares critical interdependent modes of molecular regulation that include a network first described as responsible for the basic bifurcation of neuronal from non-neuronal gene expression in vertebrates. Neurons and lens cells are among the most ancient animal cell types, yet neurons have an exclusive status also attributed to roles underlying sensation, movement, and cognition. However, this status is challenged by cells in the lens of the eye. The extent and detail of internally consistent parallels with neuron biology now catalogued in their second native cell type in the lens provide a detailed model of interdependent neuron gene expression in lens development and non-neuronal role in vision. These comprehensive parallels identify the lens as a dimension of neurobiology and a fundamental new perspective on neurodevelopment and its disorders. Finally, this understanding identifies that hallmark neuronal gene expression and key modes of associated molecular regulation evolved in tandem in the lens.

  8. Conservation through the economics lens.

    Science.gov (United States)

    Farley, Joshua

    2010-01-01

    Although conservation is an inherently transdisciplinary issue, there is much to be gained from examining the problem through an economics lens. Three benefits of such an approach are laid out in this paper. First, many of the drivers of environmental degradation are economic in origin, and the better we understand them, the better we can conserve ecosystems by reducing degradation. Second, economics offers us a when-to-stop rule, which is equivalent to a when-to-conserve rule. All economic production is based on the transformation of raw materials provided by nature. As the economic system grows in physical size, it necessarily displaces and degrades ecosystems. The marginal benefits of economic growth are diminishing, and the marginal costs of ecological degradation are increasing. Conceptually, we should stop economic growth and focus on conservation when the two are equal. Third, economics can help us understand how to efficiently and justly allocate resources toward conservation, and this paper lays out some basic principles for doing so. Unfortunately, the field of economics is dominated by neoclassical economics, which builds an analytical framework based on questionable assumptions and takes an excessively disciplinary and formalistic approach. Conservation is a complex problem, and analysis from individual disciplinary lenses can make important contributions to conservation only when the resulting insights are synthesized into a coherent vision of the whole. Fortunately, there are a number of emerging transdisciplines, such as ecological economics and environmental management, that are dedicated to this task.

  9. Spectroscopic Studies of Laser Produced Plasma Metasurfaces

    Science.gov (United States)

    Colon Quinones, Roberto; Underwood, Thomas; Cappelli, Mark

    2016-10-01

    In this presentation, we describe the spatial and temporal plasma characteristics of the dense plasma kernels that are used to construct a laser produced plasma metasurface (PM) that is intended to serve as a tunable THz reflector. The PM is an n x n array of plasmas generated by focusing the light from a 2 J/p Q-switched Nd:YAG laser through a multi-lens array (MLA) and into a gas of varying pressure. A gated CCD camera coupled to a high-resolution spectrometer is used to obtain chord-averaged H α broadening data for the cross section of a single plasma element at the lens focal point. The data is then Abel inverted to derive the radial plasma density distribution. Measurements are repeated for a range of pressures, laser energies, and lens f-number, with a time resolution of 100 ns and a gate width of 20 ns. Results are presented for the variation of plasma density and size over these different conditions. Work supported by the Air Force Office of Scientific Research (AFOSR). R. Colon Quinones and T. Underwood acknowledge the support of the Department of Defense (DoD) through the National Defense Science & Engineering Graduate Fellowship (NDSEG) Program.

  10. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift

  11. Effect of infusion bottle height on lens power after lens refilling with and without a plug

    NARCIS (Netherlands)

    Koopmans, SA; Terwee, T; Haitjema, HJ; Kooijman, AC; Barkhof, J

    2003-01-01

    Purpose: To evaluate the influence of intraoperative infusion bottle height on the power of refilled pig lenses. Setting: Research Laboratory, Pharmacia Intraocular Lens Manufacturing Plant, Groningen, The Netherlands. Methods: This study comprised 2 groups of pig eyes. In 1 group, the lens was refi

  12. Gravitational binary-lens events with prominent effects of lens orbital motion

    Energy Technology Data Exchange (ETDEWEB)

    Park, H.; Han, C.; Choi, J.-Y. [Department of Physics, Institute for Astrophysics, Chungbuk National University, Cheongju 371-763 (Korea, Republic of); Udalski, A.; Szymański, M. K.; Kubiak, M.; Soszyński, I.; Pietrzyński, G.; Poleski, R.; Ulaczyk, K.; Pietrukowicz, P.; Kozłowski, S.; Skowron, J.; Wyrzykowski, Ł. [Warsaw University Observatory, Al. Ujazdowskie 4, 00-478 Warszawa (Poland); Gould, A.; Gaudi, B. S. [Department of Astronomy, The Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Beaulieu, J.-P. [Institut d' Astrophysique de Paris, UMR 7095 CNRS-Université Pierre and Marie Curie, 98bis Bd Arago, F-75014 Paris (France); Tsapras, Y. [Las Cumbres Observatory Global Telescope Network, 6740 Cortona Drive, Suite 102, Goleta, CA 93117 (United States); Depoy, D. L. [Department of Physics and Astronomy, Texas A and M University, College Station, TX 77843 (United States); Dong, Subo [Institute for Advanced Study, Einstein Drive, Princeton, NJ 08540 (United States); Collaboration: OGLE Collaboration; μFUN Collaboration; PLANET Collaboration; RoboNet Collaboration; and others

    2013-12-01

    Gravitational microlensing events produced by lenses composed of binary masses are important because they provide a major channel for determining physical parameters of lenses. In this work, we analyze the light curves of two binary-lens events, OGLE-2006-BLG-277 and OGLE-2012-BLG-0031, for which the light curves exhibit strong deviations from standard models. From modeling considering various second-order effects, we find that the deviations are mostly explained by the effect of the lens orbital motion. We also find that lens parallax effects can mimic orbital effects to some extent. This implies that modeling light curves of binary-lens events not considering orbital effects can result in lens parallaxes that are substantially different from actual values and thus wrong determinations of physical lens parameters. This demonstrates the importance of routine consideration of orbital effects in interpreting light curves of binary-lens events. It is found that the lens of OGLE-2006-BLG-277 is a binary composed of a low-mass star and a brown dwarf companion.

  13. The Sloan Lens ACS Survey. V. The full ACS strong-lens sample

    NARCIS (Netherlands)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Gavazzi, Raphael; Moustakas, Leonidas A.; Wayth, Randall; Schlegel, David J.

    2008-01-01

    We present the definitive data for the full sample of 131 strong gravitational lens candidates observed with the Advanced Camera for Surveys (ACS) aboard the Hubble Space Telescope by the Sloan Lens ACS (SLACS) Survey. All targets were selected for higher redshift emission lines and lower redshift c

  14. DISSECTING THE GRAVITATIONAL LENS B1608+656. I. LENS POTENTIAL RECONSTRUCTION

    NARCIS (Netherlands)

    Suyu, S. H.; Marshall, P. J.; Blandford, R. D.; Fassnacht, C. D.; Koopmans, L. V. E.; McKean, J. P.; Treu, T.

    2009-01-01

    Strong gravitational lensing is a powerful technique for probing galaxy mass distributions and for measuring cosmological parameters. Lens systems with extended source-intensity distributions are particularly useful for this purpose since they provide additional constraints on the lens potential ( m

  15. The study of helicon plasma source.

    Science.gov (United States)

    Miao, Ting-Ting; Zhao, Hong-Wei; Liu, Zhan-Wen; Shang, Yong; Sun, Liang-Ting; Zhang, Xue-Zhen; Zhao, Huan-Yu

    2010-02-01

    Helicon plasma source is known as efficient generator of uniform and high density plasma. A helicon plasma source was developed for investigation of plasma neutralization and plasma lens in the Institute of Modern Physics in China. In this paper, the characteristics of helicon plasma have been studied by using Langmuir four-probe and a high argon plasma density up to 3.9x10(13) cm(-3) have been achieved with the Nagoya type III antenna at the conditions of the magnetic intensity of 200 G, working gas pressure of 2.8x10(-3) Pa, and rf power of 1200 W with a frequency of 27.12 MHz. In the experiment, the important phenomena have been found: for a given magnetic induction intensity, the plasma density became greater with the increase in rf power and tended to saturation, and the helicon mode appeared at the rf power between 200 and 400 W.

  16. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    Directory of Open Access Journals (Sweden)

    Ladan Espandar

    2011-01-01

    Full Text Available Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular lens (IOL. The hydrophilic design of the lens is optimized to address dysphotopsia while maintaining biocompatibility, optical clarity, resistance to damage, and resistance to biocontamination. Aspheric lenses decrease postoperative spherical aberration. The addition of the Softec lens provides clinicians with another option for IOL placement; however, randomized comparative studies of this lens to others already on the market remain to be completed.Keywords: hydrophilic acrylic intraocular lens, Softec HD intraocular lens, aspheric intraocular lens, IOL

  17. An improved spinning lens test to determine the stiffness of the human lens

    Science.gov (United States)

    Burd, H.J.; Wilde, G.S.; Judge, S.J.

    2011-01-01

    It is widely accepted that age-related changes in lens stiffness are significant for the development of presbyopia. However, precise details on the relative importance of age-related changes in the stiffness of the lens, in comparison with other potential mechanisms for the development of presbyopia, have not yet been established. One contributing factor to this uncertainty is the paucity and variability of experimental data on lens stiffness. The available published data generally indicate that stiffness varies spatially within the lens and that stiffness parameters tend to increase with age. However, considerable differences exist between these published data sets, both qualitatively and quantitatively. The current paper describes new and improved methods, based on the spinning lens approach pioneered by Fisher, R.F. (1971) ‘The elastic constants of the human lens’, Journal of Physiology, 212, 147–180, to make measurements on the stiffness of the human lens. These new procedures have been developed in an attempt to eliminate, or at least substantially reduce, various systematic errors in Fisher’s original experiment. An improved test rig has been constructed and a new modelling procedure for determining lens stiffness parameters from observations made during the test has been devised. The experiment involves mounting a human lens on a vertical rotor so that the lens spins on its optical axis (typically at 1000 rpm). An automatic imaging system is used to capture the outline of the lens, while it is rotating, at pre-determined angular orientations. These images are used to quantify the deformations developed in the lens as a consequence of the centripetal forces induced by the rotation. Lens stiffness is inferred using axisymmetric finite element inverse analysis in which a nearly-incompressible neo-Hookean constitutive model is used to represent the mechanics of the lens. A numerical optimisation procedure is used to determine the stiffness parameters

  18. Corneal topography and soft contact lens fit.

    Science.gov (United States)

    Young, Graeme; Schnider, Cristina; Hunt, Chris; Efron, Suzanne

    2010-05-01

    To determine which ocular topography variables affect soft contact lens fit. Fifty subjects each wore three pairs of soft lenses in random succession (Vistakon Acuvue 2, Vistakon Acuvue Advance, Ciba Vision Night & Day), and various aspects of lens fit were evaluated. The steeper base curves of each type were worn in one eye and the flatter base curves in the other eye. Corneal topography data were collected using a Medmont E300 corneal topographer (Camberwell, Australia). Corneal curvature, shape factor (SF), and corneal height were measured over a 10 mm chord and also over the maximum measurable diameter. These were measured in the horizontal, vertical, steepest, and flattest meridians. With each lens type, the steeper base curve provided the best fit on the greatest proportion of eyes and the significant differences in various aspects of fit were noted between base curves. For each lens type, there was no significant difference in mean K-reading between those eyes best fit with the steeper base curve and those eyes best fit with the flatter base curve. Two of the lenses showed a positive correlation between centration and horizontal corneal height (maximum), whereas one lens showed a negative correlation between centration and horizontal SF (SF = e). Several lenses showed a positive correlation between post-blink movement and horizontal or vertical corneal SF. The measurement of corneal topography using current Placido disc instrumentation allows a better prediction of soft lens fit than by keratometry, but it is not reliable enough to enable accurate selection of the best fitting base curve. Some correlations are evident between corneal measurements; however, trial fitting remains the method of choice for selection of soft lens base curve.

  19. [Representation and mathematical analysis of human crystalline lens].

    Science.gov (United States)

    Tălu, Stefan; Giovanzana, Stefano; Tălu, Mihai

    2011-01-01

    The surface of human crystalline lens can be described and analyzed using mathematical models based on parametric representations, used in biomechanical studies and 3D solid modeling of the lens. The mathematical models used in lens biomechanics allow the study and the behavior of crystalline lens on variables and complex dynamic loads. Also, the lens biomechanics has the potential to improve the results in the development of intraocular lenses and cataract surgery. The paper presents the most representative mathematical models currently used for the modeling of human crystalline lens, both optically and biomechanically.

  20. Imaging characteristics of a volume holographic lens

    Science.gov (United States)

    Yang, Jing; Jiang, Zhu-qing; Xu, Zhi-qiang; Liu, Shao-jie; Sun, Ya-jun; Tao, Shi-quan

    2009-07-01

    A volume holographic grating lens can reconstruct the three-dimensional information by conducting multiple optical slicing of an object based on Bragg selectivity of the volume holographic grating. In this paper, we employ the point-spread function of volume holographic imaging system to theoretically analyze its imaging resolution. In the experiments, the volume holographic gratings are made with a spherical reference (SR) and a planar reference (PR), respectively, and used as volume holographic imaging lens in our imaging system. The longitudinal and lateral defocusing characteristics of volume holographic lens with SR and with PR are investigated experimentally by displacing the interested objects from original reference location, respectively. The effects of the parameters of the volume holographic lens on the longitudinal and lateral resolution are also discussed. The experimental results show that increasing the size of the volume holographic lens can improve the depth resolution, and in particular, it has greater influence on SR VHI. The lateral selectivity of SR VHI is more sensitive than that of PR VHI, and the Bragg degenerate diffraction of PR VHI on the y axis is obviously observed.

  1. Apoptosis in the lens anlage of the heritable lens aplastic mouse (lap mouse).

    Science.gov (United States)

    Aso, S; Tashiro, M; Baba, R; Sawaki, M; Noda, S; Fujita, M

    1998-08-01

    Adult homozygous lap mice show various eye abnormalities, such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode seems to develop normally. However, the lens vesicle progresses abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. We examined cell death in the lens anlage of this mutant. The lens anlagen of homozygous lap and normal mice from days 10 to 12 of gestation were observed by light microscopy after DNA end-labeling by immunohistochemistry and by transmission electron microscopy. By light microscopy, a slight frequency of cell death was detected in the lens anlage encircling the surface ectoderm and in the anlage or in the anlage of both homozygous lap mice and normal mice at day 10 of gestation. Cell death was seen in the lens anlage encircling the surface ectoderm in the normal mouse and sporadically in the anlage of the homozygous lap mouse at day 10.5 of gestation. Cell death was visible at the area of the lens vesicle attached to the surface ectoderm and encircling the surrounding surface ectoderm in the normal mouse, and in the lens anlage encircling the surface ectoderm and the apex areas of the lens anlage in the homozygous lap mouse at day 11 of gestation. At day 12 of gestation, almost no cell death was observed in the lens anlage of the normal mouse. However, extensive areas of cell death were still seen in the lens anlage at its apex, at the inner region, and encircling the surface ectoderm in the homozygous lap mouse. Electron microscopic observation showed that the dead cells observed in the lens anlagen by light microscopy in normal and lap mice are the result of apoptosis. In lap mice, cells with cytoplasmic condensation were observed mainly at days 10 and 10.5 of gestation. Many apoptotic bodies which had been phagocytosed by adjacent cells were seen predominantly at day 11 of gestation. At day 12 of

  2. An inverse and analytic lens design method

    CERN Document Server

    Lu, Yang

    2016-01-01

    Traditional lens design is a numerical and forward process based on ray tracing and aberration theory. This method has limitations because the initial configuration of the lens has to be specified and the aberrations of the lenses have to considered. This paper is an initial attempt to investigate an analytic and inverse lens design method, called Lagrange, to overcome these barriers. Lagrange method tries to build differential equations in terms of the system parameters and the system input and output (object and image). The generalized Snell's law in three dimensional space and the normal of a surface in fundamental differential geometry are applied. Based on the Lagrange method equations for a single surface system are derived which can perfectly image a point object.

  3. 3D printed helical antenna with lens

    KAUST Repository

    Farooqui, Muhammad Fahad

    2016-12-19

    The gain of an antenna can be enhanced through the integration of a lens, however this technique has traditionally been restricted to planar antennas due to fabrication limitations of standard manufacturing processes. Here, with a unique combination of 3D and 2D inkjet printing of dielectric and metallic inks respectively, we demonstrate a Fresnel lens that has been monolithically integrated to a non-planar antenna (helix) for the first time. Antenna measurements show that the integration of a Fresnel lens enhances the gain of a 2-turn helix by around 4.6 dB giving a peak gain of about 12.9 dBi at 8.8 GHz.

  4. Catadioptric aberration correction in cathode lens microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tromp, R.M. [IBM T.J. Watson Research Center, PO Box 218, Yorktown Heights, NY 10598 (United States); Kamerlingh Onnes Laboratory, Leiden Institute of Physics, Niels Bohrweg 2, 2333 CA Leiden (Netherlands)

    2015-04-15

    In this paper I briefly review the use of electrostatic electron mirrors to correct the aberrations of the cathode lens objective lens in low energy electron microscope (LEEM) and photo electron emission microscope (PEEM) instruments. These catadioptric systems, combining electrostatic lens elements with a reflecting mirror, offer a compact solution, allowing simultaneous and independent correction of both spherical and chromatic aberrations. A comparison with catadioptric systems in light optics informs our understanding of the working principles behind aberration correction with electron mirrors, and may point the way to further improvements in the latter. With additional developments in detector technology, 1 nm spatial resolution in LEEM appears to be within reach. - Highlights: • The use of electron mirrors for aberration correction in LEEM/PEEM is reviewed. • A comparison is made with similar systems in light optics. • Conditions for 1 nm spatial resolution are discussed.

  5. Louvre-Lens : le Louvre autrement

    OpenAIRE

    Audrey Bodéré

    2010-01-01

    ∙ Quels sont les enjeux du projet Louvre-Lens pour le Musée du Louvre ? Par ce projet, le Louvre participe tant à la politique de décentralisation qu’à une volonté de démocratisation culturelle, en allant à la rencontre de nouveaux publics. Mais le projet scientifique et culturel du Louvre-Lens (PSC) précise aussi que l'un des principaux défis est d'oser le « Louvre autrement ». La présentation des collections est donc repensée pour traduire le monde Louvre à Lens. Le lien entre le Louvre Par...

  6. Louvre-Lens : le Louvre autrement

    Directory of Open Access Journals (Sweden)

    Audrey Bodéré

    2010-04-01

    Full Text Available ∙ Quels sont les enjeux du projet Louvre-Lens pour le Musée du Louvre ? Par ce projet, le Louvre participe tant à la politique de décentralisation qu’à une volonté de démocratisation culturelle, en allant à la rencontre de nouveaux publics. Mais le projet scientifique et culturel du Louvre-Lens (PSC précise aussi que l'un des principaux défis est d'oser le « Louvre autrement ». La présentation des collections est donc repensée pour traduire le monde Louvre à Lens. Le lien entre le Louvre Par...

  7. Image watermarking against lens flare effects

    Science.gov (United States)

    Chotikawanid, Piyanart; Amornraksa, Thumrongrat

    2017-02-01

    Lens flare effects in various photo and camera software nowadays can partially or fully damage the watermark information within the watermarked image. We propose in this paper a spatial domain based image watermarking against lens flare effects. The watermark embedding is based on the modification of the saturation color component in HSV color space of a host image. For watermark extraction, a homomorphic filter is used to predict the original embedding component from the watermarked component, and the watermark is blindly recovered by differentiating both components. The watermarked image's quality is evaluated by wPSNR, while the extracted watermark's accuracy is evaluated by NC. The experimental results against various types of lens flare effects from both computer software and mobile application showed that our proposed method outperformed the previous methods.

  8. The Frontier Fields Lens Modeling Comparison Project

    CERN Document Server

    Meneghetti, M; Coe, D; Contini, E; De Lucia, G; Giocoli, C; Acebron, A; Borgani, S; Bradac, M; Diego, J M; Hoag, A; Ishigaki, M; Johnson, T L; Jullo, E; Kawamata, R; Lam, D; Limousin, M; Liesenborgs, J; Oguri, M; Sebesta, K; Sharon, K; Williams, L L R; Zitrin, A

    2016-01-01

    Gravitational lensing by clusters of galaxies offers a powerful probe of their structure and mass distribution. Deriving a lens magnification map for a galaxy cluster is a classic inversion problem and many methods have been developed over the past two decades to solve it. Several research groups have developed techniques independently to map the predominantly dark matter distribution in cluster lenses. While these methods have all provided remarkably high precision mass maps, particularly with exquisite imaging data from the Hubble Space Telescope (HST), the reconstructions themselves have never been directly compared. In this paper, we report the results of comparing various independent lens modeling techniques employed by individual research groups in the community. Here we present for the first time a detailed and robust comparison of methodologies for fidelity, accuracy and precision. For this collaborative exercise, the lens modeling community was provided simulated cluster images -- of two clusters Are...

  9. Analytic Models of Plausible Gravitational Lens Potentials

    Energy Technology Data Exchange (ETDEWEB)

    Baltz, Edward A.; Marshall, Phil; Oguri, Masamune

    2007-05-04

    Gravitational lenses on galaxy scales are plausibly modeled as having ellipsoidal symmetry and a universal dark matter density profile, with a Sersic profile to describe the distribution of baryonic matter. Predicting all lensing effects requires knowledge of the total lens potential: in this work we give analytic forms for that of the above hybrid model. Emphasizing that complex lens potentials can be constructed from simpler components in linear combination, we provide a recipe for attaining elliptical symmetry in either projected mass or lens potential.We also provide analytic formulae for the lens potentials of Sersic profiles for integer and half-integer index. We then present formulae describing the gravitational lensing effects due to smoothly-truncated universal density profiles in cold dark matter model. For our isolated haloes the density profile falls off as radius to the minus fifth or seventh power beyond the tidal radius, functional forms that allow all orders of lens potential derivatives to be calculated analytically, while ensuring a non-divergent total mass. We show how the observables predicted by this profile differ from that of the original infinite-mass NFW profile. Expressions for the gravitational flexion are highlighted. We show how decreasing the tidal radius allows stripped haloes to be modeled, providing a framework for a fuller investigation of dark matter substructure in galaxies and clusters. Finally we remark on the need for finite mass halo profiles when doing cosmological ray-tracing simulations, and the need for readily-calculable higher order derivatives of the lens potential when studying catastrophes in strong lenses.

  10. Photonic crystal based polarization insensitive flat lens

    Science.gov (United States)

    Turduev, M.; Bor, E.; Kurt, H.

    2017-07-01

    The paper proposes a new design of an inhomogeneous artificially created photonic crystal lens structure consisting of annular dielectric rods to efficiently focus both transverse electric and transverse magnetic polarizations of light into the same focal point. The locations of each individual cell that contains the annular dielectric rods are determined according to a nonlinear distribution function. The inner and outer radii of the annular photonic dielectric rods are optimized with respect to the polarization insensitive frequency response of the transmission spectrum of the lens structure. The physical background of the polarization insensitive focusing mechanism is investigated in both spatial and frequency domains. Moreover, polarization independent wavefront transformation/focusing has been explored in detail by investigating the dispersion relation of the structure. Corresponding phase index distribution of the lens is attained for polarization insensitive normalized frequency range of a/λ  =  0.280 and a/λ  =  0.300, where a denotes the lattice constant of the designed structure and λ denotes the wavelength of the incident light. We show the wave transformation performance and focal point movement dynamics for both polarizations of the lens structure by specially adjusting the length of the structure. The 3D finite-difference time domain numerical analysis is also performed to verifiy that the proposed design is able to focus the wave regardless of polarization into approximately the same focal point (difference between focal distances of both polarizations stays below 0.25λ) with an operating bandwidth of 4.30% between 1476 nm and 1541 nm at telecom wavelengths. The main superiorities of the proposed lens structure are being all dielectric and compact, and having flat front and back surfaces, rendering the proposed lens design more practical in the photonic integration process in various applications such as optical switch

  11. Intraocular Lens Calcification; a Clinicopathologic Report

    Directory of Open Access Journals (Sweden)

    Mozhgan Rezaei-Kanavi

    2009-04-01

    Full Text Available

    PURPOSE: To describe the clinical and pathological features of a case of hydrogel intraocular lens (IOL calcification. CASE REPORT: A 48-year-old man underwent explantation of a single-piece hydrophilic acrylic intraocular lens in his left eye because of decreased visual acuity and milky white opalescence of the IOL. The opacified lens was exchanged uneventfully with a hydrophobic acrylic IOL. Gross examination of the explanted IOL disclosed opacification of the optic and haptics. Full-thickness sections of the lens optic were stained with hematoxylin and eosin (H&E, von Kossa and Gram Tworts'. Microscopic examination of the sections revealed fine and diffuse basophilic granular deposits of variable size within the lens optic parallel to the lens curvature but separated from the surface by a moderately clear zone. The deposits were of high calcium content as evident by dark brown staining with von Kossa. Gram Tworts' staining disclosed no microorganisms. CONCLUSION: This report further contributes to the existing literature on hydrogel IOL calcification.

  12. Pulse transformer for the AA lithium lens

    CERN Multimedia

    1980-01-01

    The antiprotons emanating from the target were initially focused by a magnetic horn. Later on, a Li-lens was used during operation for the SPS collider, until 1992. A Li-rod (130 mm long, 34 mm in diameter) constituted the secondary of a 1:23 pulse-transformer. The half-sine pulse rose to 1000 kA in 900 microsec. The angular acceptance was 95 mrad. In operation after 1992, for LEAR only, a more modest Li-lens was used (155 mm long, diameter 20 mm, 480 kA, risetime 240 microsec, angular acceptance 75 mrad).

  13. Time resolved thermal lens in edible oils

    Science.gov (United States)

    Albuquerque, T. A. S.; Pedreira, P. R. B.; Medina, A. N.; Pereira, J. R. D.; Bento, A. C.; Baesso, M. L.

    2003-01-01

    In this work time resolved thermal lens spectrometry is applied to investigate the optical properties of the following edible oils: soya, sunflower, canola, and corn oils. The experiments were performed at room temperature using the mode mismatched thermal lens configuration. The results showed that when the time resolved procedure is adopted the technique can be applied to investigate the photosensitivity of edible oils. Soya oil presented a stronger photochemical reaction as compared to the other investigated samples. This observation may be relevant for future studies evaluating edible oils storage conditions and also may contribute to a better understanding of the physical and chemical properties of this important foodstuff.

  14. Fundamentals of concentric lens systems synthesis

    Science.gov (United States)

    Ezhova, Kseniia; Zverev, Victor; Tochilina, Tatiana; Tymoshchuk, Irina

    2016-09-01

    Introduction of coefficients defining the relationship of the radii of curvature of the surfaces of concentric optical systems, allowed the transformation of the obtained analytical relations in a system of two equations with two unknowns. It is shown that the existence of the solution of the system of equations determined by the optical constants of the selected lens material. The results of the analysis of the conditions of the chromatic aberration correction position and the sequence of obtaining of the system equations define the theoretical basis of the engineering method of parametric synthesis of concentric lens systems. Application of the developed method is illustrated by examples of calculation particular systems design build.

  15. Bilateral Pseudoexfoliation Deposits on Intraocular Lens Implants

    Directory of Open Access Journals (Sweden)

    Elena Bonafonte Marquez

    2015-01-01

    Full Text Available We present a rare case of bilateral pseudoexfoliative deposits on both intraocular lens (IOL implants in an 83-year-old woman with no other associated pathology, 5 years after cataract surgery. Pseudoexfoliation syndrome is the most common cause of secondary open-angle glaucoma worldwide and these deposits are usually found on the natural lens. The fact that pseudoexfoliative deposits have been found on IOL implants implies the need for a thorough examination in pseudophakic patients, for it could be the only sign of secondary glaucoma.

  16. Immunochemical analyses of soluble lens proteins in some marine fishes

    Digital Repository Service at National Institute of Oceanography (India)

    Menezes, M.R.

    Soluble eye lens proteins of 10 fishes, belonging to the families Clupeidae, Hemirhamphidae, Lactaridae, Scombridae, Stromatidae, Psettodidae, Bothidae and Soleidae were studied by immunoelectrophoresis using the lens antiserum of Sardinella...

  17. Experimental Contact Lens to Prevent Glaucoma-Induced Blindness

    Science.gov (United States)

    ... Home Page An Experimental Contact Lens to Prevent Glaucoma-Induced Blindness By Sharon Reynolds Posted January 23, 2014 An experimental contact lens design releases a glaucoma medicine at a steady rate for up to ...

  18. Phakic Pattern Pseudoexfoliation Material Accumulation on Intraocular Lens Surface

    Directory of Open Access Journals (Sweden)

    Emre Güler

    2014-03-01

    Full Text Available Pseudophakic pseudoexfoliation is the accumulation of pseudoexfoliation material on the intraocular lens. Most of the cases have showed scattered flecks of pseudoexfoliation material on the surface of the intraocular lens. However, the phakic pattern consisting of classic three-zone on the intraocular lens is rarely observed. In this case report, we describe a phakic pattern pseudoexfoliation material on the intraocular lens surface 8 years after cataract extraction. (Turk J Ophthalmol 2014; 44: 156-7

  19. Phakic Pattern Pseudoexfoliation Material Accumulation on Intraocular Lens Surface

    OpenAIRE

    Emre Güler; Aylin Tenlik; Tuba Kara Akyüz

    2014-01-01

    Pseudophakic pseudoexfoliation is the accumulation of pseudoexfoliation material on the intraocular lens. Most of the cases have showed scattered flecks of pseudoexfoliation material on the surface of the intraocular lens. However, the phakic pattern consisting of classic three-zone on the intraocular lens is rarely observed. In this case report, we describe a phakic pattern pseudoexfoliation material on the intraocular lens surface 8 years after cataract extraction. (Turk J Ophthalm...

  20. Lens autofluorescence is not increased at high altitude

    DEFF Research Database (Denmark)

    Kessel, Line; Kofoed, Peter Kristian; Zubieta-Calleja, Gustavo

    2010-01-01

    PURPOSE: To study the relation between ambient environmental ultraviolet radiation exposure and lens fluorescence. METHODS: Non-invasive lens fluorometry measurements were compared in healthy Bolivian and Danish subjects. Background ultraviolet radiation was 4.5 times higher in Bolivia than...... in Denmark. RESULTS: No significant differences in lens fluorescence or transmittance were found between Bolivian and Danish volunteers. CONCLUSION: Age-corrected lens fluorescence and transmittance were comparable for healthy participants living at high altitude near the equator and healthy volunteers...

  1. An Ultrasonic Lens Design Based on Prefractal Structures

    OpenAIRE

    Sergio Castiñeira-Ibáñez; Daniel Tarrazó-Serrano; Constanza Rubio; Pilar Candelas; Antonio Uris

    2016-01-01

    The improvement in focusing capabilities of a set of annular scatterers arranged in a fractal geometry is theoretically quantified in this work by means of the finite element method (FEM). Two different arrangements of rigid rings in water are used in the analysis. Thus, both a Fresnel ultrasonic lens and an arrangement of rigid rings based on Cantor prefractals are analyzed. Results show that the focusing capacity of the modified fractal lens is better than the Fresnel lens. This new lens is...

  2. 21 CFR 886.4300 - Intraocular lens guide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Intraocular lens guide. 886.4300 Section 886.4300 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4300 Intraocular lens guide. (a) Identification. An intraocular lens guide is a device...

  3. 21 CFR 886.5916 - Rigid gas permeable contact lens.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rigid gas permeable contact lens. 886.5916 Section... (CONTINUED) MEDICAL DEVICES OPHTHALMIC DEVICES Therapeutic Devices § 886.5916 Rigid gas permeable contact lens. (a) Identification. A rigid gas permeable contact lens is a device intended to be worn...

  4. 21 CFR 800.10 - Contact lens solutions; sterility.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Contact lens solutions; sterility. 800.10 Section...) MEDICAL DEVICES GENERAL Requirements for Specific Medical Devices § 800.10 Contact lens solutions... ophthalmic use, including contact lens solutions, should be sterile. It is further evident that...

  5. Myotonic dystrophy protein kinase (DMPK) induces actin cytoskeletal reorganization and apoptotic-like blebbing in lens cells

    Science.gov (United States)

    Jin, S.; Shimizu, M.; Balasubramanyam, A.; Epstein, H. F.

    2000-01-01

    DMPK, the product of the DM locus, is a member of the same family of serine-threonine protein kinases as the Rho-associated enzymes. In DM, membrane inclusions accumulate in lens fiber cells producing cataracts. Overexpression of DMPK in cultured lens epithelial cells led to apoptotic-like blebbing of the plasma membrane and reorganization of the actin cytoskeleton. Enzymatically active DMPK was necessary for both effects; inactive mutant DMPK protein did not produce either effect. Active RhoA but not constitutive GDP-state mutant protein produced similar effects as DMPK. The similar actions of DMPK and RhoA suggest that they may function in the same regulatory network. The observed effects of DMPK may be relevant to the removal of membrane organelles during normal lens differentiation and the retention of intracellular membranes in DM lenses. Copyright 2000 Wiley-Liss, Inc.

  6. Analysis on shift and rotation of intraocular lens after phakic collamer lens implantation

    National Research Council Canada - National Science Library

    Yuan-Yuan Lu; Na Yang; Xue-Dong Li; Jun Kong

    2016-01-01

    .... In 1993, Staar Surgical(A.G. Nidau)introduced a modified intraocular collamer lens(ICL)for the correction of high myopia, which emerged as a safe and effective operation for moderate or high myopia gradually...

  7. Contact lens wear and microbial keratitis.

    Science.gov (United States)

    Ahuja, Markanday

    2002-11-01

    Common types of contact lens are hard, rigid gas-permeable or soft lenses. Most lenses are worn on a daily basis. Cosmetic lenses are worn for non-medical indications. Microbial keratitis, a rare but most significant complication is discussed in this article. Pseudomonas aeruginosa and staphylococci are the most common organisms cause infective keratitis. Fungi and acanthamoeba are also responsible. The causes of increased susceptibility to infection are poor lens hygiene, adhesion of bacteria to lens surface and hypoxia. Preventing measures to be taken while wearing contact lens are discussed in a nutshell. Ocular pain, conjunctival infection, photophobia, epiphora and reduced vision are some of the symptoms of corneal infection. Diagnostic laboratory investigations are to be carried out immediately when a microbial corneal ulcer is suspected. Acanthamoeba can be cultured from corneal scrapes. Immunologically based fluorescein labelling techniques appear to be more sensitive than simple staining. The treatment consists of medical and surgical intervention. Corneal thinning, descemetocele formation and perforation are possible complications.

  8. Application of optical polymers in lens design

    Science.gov (United States)

    Sultanova, Nina; Kasarova, Stefka; Nikolov, Ivan

    2016-03-01

    Optical, some thermal and elastic properties of optical polymers which are of importance in lens design are considered. Results are based on precise measurement of refraction of materials. Ultrasonic investigation of elastic moduli is carried out. Comparison to properties of Schott glasses is accomplished. Examples on the design of all-plastic and hybrid glass-plastic systems are presented.

  9. Testing and inspecting lens by holographic means

    Science.gov (United States)

    Hildebrand, Bernard P.

    1976-01-01

    Processes for the accurate, rapid and inexpensive testing and inspecting of oncave and convex lens surfaces through holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and said convex surfaces to be so tested.

  10. Lens testing using total internal reflection holography

    Science.gov (United States)

    Hildebrand, Bernard P.

    1976-12-14

    Accurate, rapid and inexpensive testing and inspecting of lens surfaces tugh holographic means requiring no beamsplitters, mirrors or overpower optics, and wherein a hologram formed in accordance with one aspect of the invention contains the entire interferometer and serves as both a master and illuminating source for both concave and convex surfaces to be so tested.

  11. Contact lens rehabilitation following repaired corneal perforations

    Directory of Open Access Journals (Sweden)

    Sreenivas V

    2006-03-01

    Full Text Available Abstract Background Visual outcome following repair of post-traumatic corneal perforation may not be optimal due to presence of irregular keratometric astigmatism. We performed a study to evaluate and compare rigid gas permeable contact lens and spectacles in visual rehabilitation following perforating corneal injuries. Method Eyes that had undergone repair for corneal perforating injuries with or without lens aspiration were fitted rigid gas permeable contact lenses. The fitting pattern and the improvement in visual acuity by contact lens over spectacle correction were noted. Results Forty eyes of 40 patients that had undergone surgical repair of posttraumatic corneal perforations were fitted rigid gas permeable contact lenses for visual rehabilitation. Twenty-four eyes (60% required aphakic contact lenses. The best corrected visual acuity (BCVA of ≥ 6/18 in the snellen's acuity chart was seen in 10 (25% eyes with spectacle correction and 37 (92.5% eyes with the use of contact lens (p Conclusion Rigid gas permeable contact lenses are better means of rehabilitation in eyes that have an irregular cornea due to scars caused by perforating corneal injuries.

  12. Magnifying perfect lens with positive refraction

    CERN Document Server

    Tyc, Tomas

    2010-01-01

    We propose a device with a positive isotropic refractive index that creates a magnified perfect real image of an optically homogeneous three-dimensional region of space within geometrical optics. Its key ingredient is a new refractive index profile that can work as a perfect lens on its own, having a very moderate index range.

  13. Solar powered desalination system using Fresnel lens

    Science.gov (United States)

    Sales, M. T. B. F.

    2016-11-01

    The Philippines is surrounded by coastal areas and these areas can be a potential source for potable water. This study aims to design and construct a solar powered desalination system using Fresnel lens. The experimental study was conducted using polluted salt water for the sample and desalination was carried out using the designed system. The desalination system was composed of the solar concentrator, solar still and the condenser system. The Fresnel lens was made of acrylic plastic and was an effective solar concentrator. Solar stills made of dark colored glass bottles were effective in absorbing the solar energy. The condenser system made of polybutylene and polystyrene were effective in condensing the vapor at ambient temperature. The shortest time of vaporization of the salt water was at 293 sec and the optimum angle of position of the lens was 36.42°. The amount of condensate collected was directly proportional to the amount of salt water in the solar still. The highest mean efficiency of the designed set-up was 34.82%. The water produced by the solar powered desalination system using Fresnel lens passed the standards set by WHO (World Health Organization) for drinking water.

  14. Intraocular lens in a fighter aircraft pilot.

    OpenAIRE

    Loewenstein, A; Geyer, O; Biger, Y; Bracha, R; Shochat, I; Lazar, M.

    1991-01-01

    A pseudophakic pilot of the Israeli air force flying an F-15 (Eagle) aircraft was followed up for three years. He experienced about 100 flying hours, 5% of the time under high g stress. The intraocular lens did not dislocate and no complications were observed. It seems that flying high performance fighter aircraft is not contraindicated in pseudophakic pilots.

  15. High Accuracy Dual Lens Transmittance Measurements

    Science.gov (United States)

    2007-08-01

    measurement of lens transmission,” Metrologia 37, 603–605 (2000). 3. B. Munro, “Quantum information processing with light and its requirement for detectors...5. N. P. Fox, “Trap detectors and their properties,” Metrologia 28, 197–202 (1991). 5402 APPLIED OPTICS Vol. 46, No. 22 1 August 2007 6. S. L

  16. High Dk piggyback contact lens system for contact lens-intolerant keratoconus patients

    OpenAIRE

    Tomris Sengor; Sevda Aydin Kurna; Suat Aki; et al

    2011-01-01

    Tomris Sengor, Sevda Aydin Kurna, Suat Aki, Yelda ÖzkurtFatih Sultan Mehmet Training and Research Hospital, Istanbul, TurkeyBackground: The aim of the study was to examine the clinical success of high Dk (oxygen permeability) piggyback contact lens (PBCL) systems for the correction of contact lens intolerant keratoconus patients.Methods: Sixteen patients (29 eyes) who were not able to wear gas-permeable rigid lenses were included in this study. Hyper Dk silicone hydrogel (oxygen tran...

  17. Minus Piggyback Lens Overlaying ReSTOR® Multifocal Lens in High Myopia

    Directory of Open Access Journals (Sweden)

    Isha Gupta

    2013-06-01

    Full Text Available Background: We report the case of a 40-year-old female patient treated with implantation of the Acrysof® IQ ReSTOR® lens (Alcon, Fort Worth, Tex., USA with overlaying Acrysof EXpand® minus piggyback lens (Alcon. Methods: The patient had high myopia and was diagnosed with presbyopia and bilateral posterior subcapsular cataract. She desired to be spectacle-free and opted to undergo bilateral placement of the ReSTOR multifocal lens. The necessary intraocular lens (IOL power was +3.5 in the right eye and +4.0 in the left eye, though the range of commercially available ReSTOR lenses is +6.0 to +34.0 D. In order to achieve emmetropia in this case of high myopia, it was determined that an EXpand minus piggyback lens would be necessary. Results: Implantation of the ReSTOR lens with overlaying EXpand minus piggyback lens was performed successfully and without complication. At 5 months postoperatively, the patient had 20/20 uncorrected visual acuity in both eyes. She reported a high level of satisfaction and was able to return to her daily activities including reading and driving without spectacles. Conclusion: We report successful primary implantation of AcrySof EXpand minus piggyback lenses overlying the AcrySof IQ ReSTOR lens in a patient with high myopia. Long-term follow-up and further evaluation is necessary to establish piggyback IOL implantation with multifocal IOL as an accepted treatment for high myopia with presbyopia.

  18. Shaped Plasma Lenses for Optical Beam Control at High Laser Intensities

    Science.gov (United States)

    Hubbard, R. F.; Palastro, J. P.; Johnson, L. A.; Hafizi, B.; Gordon, D. F.; Penano, J. R.; Helle, M. H.; Kaganovich, D.

    2016-10-01

    A plasma channel is a cylindrical plasma column with an on-axis density minimum. A short plasma channel can focus a laser pulse in much the same manner as a conventional lens or off-axis parabola. If the plasma has an off-axis density maximum (``inverse channel''), it behaves like a negative lens and acts to defocus the pulse. In either case, a shaped plasma lens (SPL) may be placed in the beamline at locations where the laser intensity or fluence is orders of magnitude above the damage threshold for conventional solid optics. When placed after an off-axis parabola, SPLs may provide additional flexibility and spot size control and may also be useful in suppressing laser prepulse. For high power, ultrashort laser pulses, the broad laser bandwidth and extreme intensities produce chromatic and phase aberrations and amplitude distortions that degrade the lens focusing or defocusing performance. Although there have been a few experiments that demonstrate laser pulse focusing by a shaped plasma lens, generation and control of the plasma present significant challenges. Potential applications of SPLs to laser-plasma accelerators will be discussed. Supported by the Naval Research Laboratory Base Program.

  19. Preventive role of lens antioxidant defense mechanism against riboflavin-mediated sunlight damaging of lens crystallins.

    Science.gov (United States)

    Anbaraki, Afrooz; Khoshaman, Kazem; Ghasemi, Younes; Yousefi, Reza

    2016-10-01

    The main components of sunlight reaching the eye lens are UVA and visible light exerting their photo-damaging effects indirectly by the aid of endogenous photosensitizer molecules such as riboflavin (RF). In this study, lens proteins solutions were incubated with RF and exposed to the sunlight. Then, gel mobility shift analysis and different spectroscopic assessments were applied to examine the structural damaging effects of solar radiation on these proteins. Exposure of lens proteins to direct sunlight, in the presence of RF, leads to marked structural crosslinking, oligomerization and proteolytic instability. These structural damages were also accompanied with reduction in the emission fluorescence of Trp and Tyr and appearance of a new absorption peak between 300 and 400nm which can be related to formation of new chromophores. Also, photo-oxidation of lens crystallins increases their oligomeric size distribution as examined by dynamic light scattering analysis. The above mentioned structural insults, as potential sources of sunlight-induced senile cataract and blindness, were significantly attenuated in the presence of ascorbic acid and glutathione which are two important components of lens antioxidant defense system. Therefore, the powerful antioxidant defense mechanism of eye lens is an important barrier against molecular photo-damaging effects of solar radiations during the life span. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Analysis of fiber lens with gradient index based on thin lens equivalence

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rui-feng; GE Chun-feng; LI Shi-chen

    2006-01-01

    Theoretical analysis of the fiber-lens TEC (Thermally Expended Core) /Coreless/GRIN (Graded-Index) based on thin lens equivalence is presented in this paper.On condition that the TEC part adjusts the waist radius of an incident Gaussian beam,that the coreless part controlls the space between the beam waist and the thin lens,and that the GRIN part acts as the thin lens with its focal length determined by fiber index distribution parameter g,the analytic expressions of the waist spot size and the working distance of the output Gaussian beam are derived,and the influence of the coreless fiber and the length of the GRIN fiber upon the fiber-lens parameter is discussed based on the numerical simulation results.It is concluded that,if a GRIN style fiber-lens is used as a collimator,the maximum of the spot waist can be up to 80 μm and the divergence angle of single-mode optical fiber can be reduced by 8 times.If it is applied to a MEMS device, the maximum working distance can be up to 3 mm.

  1. A SEP Mission to Jupiter Using the Stretched Lens Array

    Science.gov (United States)

    Brandhorst, Henry W.; Rodiek, Julie A.; Ferguson, Dale C.; O'Neill, Mark J.; Piszczor, Michael F.; Oleson, Steve

    2008-01-01

    As space exploration continues to be a primary focus of NASA, solar electric propulsion (SEP) becomes a forerunner in the mode of transportation to reach other planets in our solar system. Several critical issues emerge as potential barriers to this approach such as reducing solar array radiation damage, operating the array at high voltage (>300 V) for extended times for Hall or ion thrusters, and designing an array that will be resistant to micrometeoroid impacts and the differing environmental conditions as the vehicle travels further into space. It is also of great importance to produce an array that is light weight to preserve payload mass fraction and to do this at a cost that is lower than today's arrays. This paper will describe progress on an array that meets all these requirements and will detail its use in a solar electric mission to Jupiter. From 1998-2001, NASA flew the Deep Space 1 mission that validated the use of ion propulsion for extended space missions. This highly successful two-year mission also used a novel SCARLET solar array that concentrated sunlight eight-fold onto small area solar cells. This array performed flawlessly and within 2% of its projected performance over the entire mission. That design has evolved into the Stretched Lens Array (SLA) shown in figure 1. The primary difference between SCARLET and the SLA is that no additional glass cover is used over the silicone lens. This has led to significant mass, cost and complexity reductions. The module shown in figure 1 is the latest version of the design. This design leads to a specific power exceeding 300 W/kg at voltages exceeding 300 V. In addition, this module has been tested to voltages over 1000 V while under hypervelocity particle impact in a plasma environment with no arcing. Furthermore array segments are under test for corona breakdown that can become a critical issue for long term, high voltage missions.

  2. Liquid bridge as a tunable-focus cylindrical liquid lens

    Science.gov (United States)

    Chen, H.; Tabatabaei, N.; Amirfazli, A.

    2017-01-01

    We proposed a method to create a tunable-focus cylindrical liquid lens using a liquid bridge between two narrow surfaces. Due to the surface edge effect, the interface of the liquid bridge (on the long side) was shown to be able to serve as a tunable-focus cylindrical liquid lens. The working distance of the lens can be adjusted by changing either or both of the height of the bridge (H) and the volume of the liquid (V). By varying H and V, the lens can serve as either diverging or converging lens, with a minimum working distance of 2.11 mm.

  3. Gram negative bacteria and contact lens induced acute red eye

    Directory of Open Access Journals (Sweden)

    Sankaridurg Padmaja

    1996-01-01

    Full Text Available Two patients using hydrogel contact lenses on a daily wear schedule slept overnight with the lenses and woke up with a Contact Lens Induced Acute Red Eye (CLARE. The contact lenses recovered aseptically at the time of the event grew significant colonies of Pseudomonas aeruginosa and Aeromonas hydrophila in patient A and Pseudomonas aeruginosa and Serratia liquefaciens from patient B. Similar organisams from the contact lenses were recovered from the lens case and lens care solutions of patient B. In both the patients the condition resolved on discontinuation of lens wear. Patient compliance as a requirement for successful contact lens wear is highlighted with the illustration of these cases.

  4. Hypoplastic basement membrane of the lens anlage in the inheritable lens aplastic mouse (lap mouse).

    Science.gov (United States)

    Aso, S; Baba, R; Noda, S; Ikuno, S; Fujita, M

    2000-04-01

    Adult homozygous lap mice show various eye abnormalities such as aphakia, retinal disorganization, and dysplasia of the cornea and anterior chamber. In the fetal eye of a homozygous lap mouse, the lens placode appears to develop normally. However, the lens vesicle develops abnormally to form a mass of cells without a cavity, and the mass vanishes soon afterward. Apoptotic cell death is associated with the disappearance of the lens anlage. We examined the basement membranes of the lens anlage of this mutant by immunohistochemical methods under light microscopy using antibodies against basement membrane components of the lens anlage, type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan, and entactin and by transmission electron microscopy. Immunohistochemistry showed the distribution and intensity of antibody binding to the lens anlage to be almost the same for each these antibodies regardless of the stage of gestation or whether the anlagen were from normal BALB/c or lap mice. Thus, positive continuous reactions were observed around the exterior region of the lens anlage from day 10 of gestation for type IV collagen, fibronectin, laminin, heparan sulfate proteoglycan antibodies, and at least from day 11of gestation for entactin antibody. The basement membrane lamina densa of both normal and lap mice was shown by electron microscopy to be discontinuous at days 10 and 10.5 of gestation. However, by day 11 the lamina densa was continuous in the lens anlagen of normal mice but still discontinuous in the lap mice. By day 12 of gestation, the lamina densa had thickened markedly in normal mice, whereas in lap mice it remained discontinuous and its thinness indicated hypoplasia. These results indicate that, while all basement components examined are produced and deposited in the normal region of the lens anlage in the lap mouse, the basement membrane is, for some reason, imperfectly formed. The time at which hypoplasia of the basement membrane was observed

  5. Antenna development for high field plasma imaging.

    Science.gov (United States)

    Kong, X; Domier, C W; Luhmann, N C

    2010-10-01

    Electron cyclotron emission imaging (ECEI) and microwave imaging reflectometry (MIR) are two microwave nonperturbing plasma visualization techniques that employ millimeter-wave imaging arrays with lens-coupled planar antennas, yielding time-resolved images of temperature (via ECEI) and electron density (via MIR) fluctuations within high temperature magnetic fusion plasmas. A series of new planar antennas have been developed that extend this technology to frequencies as high as 220 GHz for use on high field plasma devices with toroidal fields in excess of 3 T. Antenna designs are presented together with theoretical calculations, simulations, and experimental measurements.

  6. Lightweight autoclavable wide-angle contact lens for vitreous surgery.

    Science.gov (United States)

    Chalam, K V; Gupta, Shailesh K; Agarwal, Swati

    2007-01-01

    The authors describe an autoclavable, self-stabilizing, lightweight wide-angle contact lens for vitrectomy. The lens has two optical pieces with perforated plastic casing to sustain a high temperature (150 degrees C) for autoclaving. The lens has a 106 degrees static and 127 degrees dynamic field of view. The footplates and reduced weight (2.4 grams) due to the plastic casing allow self-stabilization of the lens. The open lens design.with high temperature resistant plastic prevents fogging during autoclaving and surgery. The autoclavable, self-stabilizing, lightweight wide-angle contact lens allows visualization of the peripheral retina during surgery and faster sterilization by autoclaving between surgeries without the disadvantage of lens fogging.

  7. Pars Plana Vitrectomy in Treatment of Lens Injury

    Directory of Open Access Journals (Sweden)

    Remzi Avcı

    2013-01-01

    Full Text Available Lens injury due to traumas may present as loss of capsule integrity, cataract, lens subluxation, or lens luxation. In addition, lens subluxation and lens luxation may occur in pseudophakic patients due to trauma. Clear corneal, scleral or sclero-corneal phacoemulsification surgery, pars plana vitrectomy, pars plana vitrectomy with phaco-fragmentation, or pars plana vitrectomy with removal through corneal incision techniques are used in the treatment of lens injury due to traumas. Intraocular lens can be implanted in the bag, sulcus, or anterior chamber during the surgery. Depending on the circumstances, scleral fixated intraocular lenses or iris-claw lenses may also be preferred. Rehabilitation of such patients is not of a great concern today, with the advanced level of vitreoretinal surgery and cataract surgery techniques and with the current state of technology. (Turk J Ophthalmol 2013; 43: 51-4

  8. System and Method for Null-Lens Wavefront Sensing

    Science.gov (United States)

    Hill, Peter C. (Inventor); Thompson, Patrick L. (Inventor); Aronstein, David L. (Inventor); Bolcar, Matthew R. (Inventor); Smith, Jeffrey S. (Inventor)

    2015-01-01

    A method of measuring aberrations in a null-lens including assembly and alignment aberrations. The null-lens may be used for measuring aberrations in an aspheric optic with the null-lens. Light propagates from the aspheric optic location through the null-lens, while sweeping a detector through the null-lens focal plane. Image data being is collected at locations about said focal plane. Light is simulated propagating to the collection locations for each collected image. Null-lens aberrations may extracted, e.g., applying image-based wavefront-sensing to collected images and simulation results. The null-lens aberrations improve accuracy in measuring aspheric optic aberrations.

  9. Status and challenges in electrical diagnostics of processing plasmas

    DEFF Research Database (Denmark)

    Stamate, Eugen

    2014-01-01

    Dry processing based on reactive plasmas was the main driven force for micro- and recently nano-electronic industry. Once with the increasing in plasma complexity new diagnostics methods have been developed to ensure a proper process control during etching, thin film deposition, ion implantation...... or other steps in device fabrication. This work reviews some of the unconventional methods developed in the last two decays to measure the parameters of reactive plasmas including, the test function method, thermal probes, and plasma-sheath-lens probes. The negative ion detection and surface contamination...... in plasmas with a high degree of contamination are also addressed. (C) 2014 Elsevier B.V. All rights reserved....

  10. Meter scale plasma source for plasma wakefield experiments

    Science.gov (United States)

    Vafaei-Najafabadi, N.; Shaw, J. L.; Marsh, K. A.; Joshi, C.; Hogan, M. J.

    2012-12-01

    High accelerating gradients generated by a high density electron beam moving through plasma has been used to double the energy of the SLAC electron beam [1]. During that experiment, the electron current density was high enough to generate its own plasma without significant head erosion. In the newly commissioned FACET facility at SLAC, the peak current will be lower and without pre-ionization, head erosion will be a significant challenge for the planned experiments. In this work we report on our design of a meter scale plasma source for these experiments to effectively avoid the problem of head erosion. The plasma source is based on a homogeneous metal vapor gas column that is generated in a heat pipe oven [2]. A lithium oven over 30 cm long at densities over 1017 cm-3 has been constructed and tested at UCLA. The plasma is then generated by coupling a 10 TW short pulse Ti:Sapphire laser into the gas column using an axicon lens setup. The Bessel profile of the axicon setup creates a region of high intensity that can stretch over the full length of the gas column with approximately constant diameter. In this region of high intensity, the alkali metal vapor is ionized through multi-photon ionization process. In this manner, a fully ionized meter scale plasma of uniform density can be formed. Methods for controlling the plasma diameter and length will also be discussed.

  11. Meter scale plasma source for plasma wakefield experiments

    Energy Technology Data Exchange (ETDEWEB)

    Vafaei-Najafabadi, N.; Shaw, J. L.; Marsh, K. A.; Joshi, C.; Hogan, M. J. [Department of Electrical Engineering, University of California Los Angeles, Los Angeles, CA 90095 (United States); SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States)

    2012-12-21

    High accelerating gradients generated by a high density electron beam moving through plasma has been used to double the energy of the SLAC electron beam [1]. During that experiment, the electron current density was high enough to generate its own plasma without significant head erosion. In the newly commissioned FACET facility at SLAC, the peak current will be lower and without pre-ionization, head erosion will be a significant challenge for the planned experiments. In this work we report on our design of a meter scale plasma source for these experiments to effectively avoid the problem of head erosion. The plasma source is based on a homogeneous metal vapor gas column that is generated in a heat pipe oven [2]. A lithium oven over 30 cm long at densities over 10{sup 17} cm{sup -3} has been constructed and tested at UCLA. The plasma is then generated by coupling a 10 TW short pulse Ti:Sapphire laser into the gas column using an axicon lens setup. The Bessel profile of the axicon setup creates a region of high intensity that can stretch over the full length of the gas column with approximately constant diameter. In this region of high intensity, the alkali metal vapor is ionized through multi-photon ionization process. In this manner, a fully ionized meter scale plasma of uniform density can be formed. Methods for controlling the plasma diameter and length will also be discussed.

  12. A polycarbonate ophthalmic-prescription lens series.

    Science.gov (United States)

    Davis, J K

    1978-08-01

    Improvements in polycarbonate material, production techniques, and scratch-resistant coatings, combined with a process-oriented design, have resulted in a precision lens series. Surface quality is comparable to that of untreated glass ophthalmic lenses. The repeatability of the process results in closely controlled axial power and off-axis performance. For most lens prescriptions, the ANSI Z80.1 optical-center specifications for prescription accuracy are maintained through a total field of view of 40 deg for an 8-mm range of center-of-rotation distances. Off-axis astigmatism is controlled for near-point seeing. The lenses are both lighter and thinner than those of crown glass. A scratch-resistant coating reduces the reflections normally associated with high-index (1.586) materials. Impact resistance exceeds that required by ANSI Z80.7 and is many times that required by ANSI Z80.1.

  13. A Tribute to Dr. Willy Lens

    Directory of Open Access Journals (Sweden)

    Maarten Vansteenkiste

    2016-07-01

    Full Text Available Dr. Willy Lens, born on December 10th, 1943, passed away on August 29th, 2014. With his passing, the motivation community has lost a seminal member, a mentor, and a friend. Dr. Lens – a Fellow of the Association for Psychological Science and Founding Fellow of the American Educational Research Association – made fundamental contributions to the study of motivation both through his own work and through his caring and thoughtful mentorship of a large community of scholars. With this tribute, we want to honor Dr. Willy Lens’ significance to psychology and education as well as his positive influence, both personally and professionally, on the lives of dozens of scholars. With his contagious enthusiasm and caring mentorship, Willy was an example for our academic community and with this tribute we express our gratitude for the privilege to have collaborated with him.

  14. Understanding Science Through the Computational Lens

    Institute of Scientific and Technical Information of China (English)

    Richard M. Karp

    2011-01-01

    This article explores the changing nature of the interaction between computer science and the natural and social sciences.After briefly tracing the history of scientific computation,the article presents the concept of computational lens,a metaphor for a new relationship that is emerging between the world of computation and the world of the sciences.Our main thesis is that,in many scientific fields,the processes being studied can be viewed as computational in nature,in the sense that the processes perform dynamic transformations on information represented as digital data.Viewing natural or engineered systems through the lens of their computational requirements or capabilities provides new insights and ways of thinking.A number of examples are discussed in support of this thesis.The examples are from various fields,including quantum computing,statistical physics,the World Wide Web and the Internet,mathematics,and computational molecular biology.

  15. A Lens Mapping Algorithm for Weak Lensing

    CERN Document Server

    Saini, T D; Saini, Tarun Deep; Raychaudhury, Somak

    2001-01-01

    We develop an algorithm for the reconstruction of the two-dimensional massdistribution of a cluster of galaxies from the observable distortion ofbackground galaxies. From the measured reduced shear gamma_i/(1-kappa) the lensmapping is directly obtained, from which a mass distribution is derived. Thisis unlike other methods where the convergence (kappa) is first obtained. Weshow that this method works best for sub-critical lenses but can be applied toa critical lens away from the critical lines. For finite fields the usualmass-sheet degeneracy is shown to exist in this method as well. We suggest aniterative scheme to remove the mass-sheet degeneracy for the case of asub-critical lens, in the absence of a substantial external shear. The sametechnique can be used with additional information for the case of a criticallens as well. A scheme to reduce the effects of noise is also suggested.

  16. Fibrosis in the lens. Sprouty regulation of TGFβ-signaling prevents lens EMT leading to cataract.

    Science.gov (United States)

    Lovicu, F J; Shin, E H; McAvoy, J W

    2016-01-01

    Cataract is a common age-related condition that is caused by progressive clouding of the normally clear lens. Cataract can be effectively treated by surgery; however, like any surgery, there can be complications and the development of a secondary cataract, known as posterior capsule opacification (PCO), is the most common. PCO is caused by aberrant growth of lens epithelial cells that are left behind in the capsular bag after surgical removal of the fiber mass. An epithelial-to-mesenchymal transition (EMT) is central to fibrotic PCO and forms of fibrotic cataract, including anterior/posterior polar cataracts. Transforming growth factor β (TGFβ) has been shown to induce lens EMT and consequently research has focused on identifying ways of blocking its action. Intriguingly, recent studies in animal models have shown that EMT and cataract developed when a class of negative-feedback regulators, Sprouty (Spry)1 and Spry2, were conditionally deleted from the lens. Members of the Spry family act as general antagonists of the receptor tyrosine kinase (RTK)-mediated MAPK signaling pathway that is involved in many physiological and developmental processes. As the ERK/MAPK signaling pathway is a well established target of Spry proteins, and overexpression of Spry can block aberrant TGFβ-Smad signaling responsible for EMT and anterior subcapsular cataract, this indicates a role for the ERK/MAPK pathway in TGFβ-induced EMT. Given this and other supporting evidence, a case is made for focusing on RTK antagonists, such as Spry, for cataract prevention. In addition, and looking to the future, this review also looks at possibilities for supplanting EMT with normal fiber differentiation and thereby promoting lens regenerative processes after cataract surgery. Whilst it is now known that the epithelial to fiber differentiation process is driven by FGF, little is known about factors that coordinate the precise assembly of fibers into a functional lens. However, recent research

  17. A stereoscopic lens for digital cinema cameras

    Science.gov (United States)

    Lipton, Lenny; Rupkalvis, John

    2015-03-01

    Live-action stereoscopic feature films are, for the most part, produced using a costly post-production process to convert planar cinematography into stereo-pair images and are only occasionally shot stereoscopically using bulky dual-cameras that are adaptations of the Ramsdell rig. The stereoscopic lens design described here might very well encourage more live-action image capture because it uses standard digital cinema cameras and workflow to save time and money.

  18. Gravitational Lens: Deep Space Probe Design

    Science.gov (United States)

    2012-03-01

    List of Abbreviations Abbreviation Page FSM Focal Space Mission . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CMB Cosmic Microwave...concert with the sun’s gravitational lens to image nearby solar systems and/or other pertinent astronomical objects, e.g. the Cosmic Microwave Background...CMB) radiation. 1.2 Thesis Objective In Deep Space Flight and Communications Claudio Maccone uses the mass, radius , mean density, and Schwarzschild

  19. Rose-K contact lens for keratoconus

    Directory of Open Access Journals (Sweden)

    Jain Arun

    2007-01-01

    Full Text Available Aim: To report clinical experience and the comparative value of axial and instantaneous topography data in fitting Rose-K design contact lenses in moderate and severe keratoconus. Materials and Methods: Thirty-eight eyes (of 23 patients with keratoconus were fitted with Rose-K design contact lenses and followed up for at least six months or more. Visual acuity with habitual vision correction available was measured. Axial and instantaneous topography maps for each eye were recorded. Contact lens wear comfort was graded on a ten point rating scale every three months. Results: Fourteen (100% moderate keratoconus eyes (average Sim K 48.61 ± 1.24D and 23 of 24 (96% of severe keratoconus eyes (average Sim K 60.88 ± 5.31D were successfully fitted with the Rose-K lenses. Final fit contact lenses in severe keratoconus had statistically significant steeper base curves compared to average axial corneal curvature than in moderate keratoconus eyes. Average simulated corneal curvature on axial maps predicted final fit contact lens base curves significantly better than on instantaneous maps. Thirty-three of the 37 eyes fitted with contact lenses maintained wear comfort over average follow up period of 13 ± 3.5 months. Conclusions: Rose-K design rigid contact lenses are successful in visually rehabilitating 100% of moderate and 96% of severe keratoconus eyes. Most patients (90% maintained contact lens wear comfort. Corneal curvature on axial maps is a better predictive of base curve of final fit contact lens.

  20. Comparison and Calibration of Mobile Phone Fisheye Lens and Regular Fisheye Lens via Equidistant Model

    Directory of Open Access Journals (Sweden)

    Cumhur Sahin

    2016-01-01

    Full Text Available Nowadays, mobile phones are more than a device that can only satisfy the communication need between people. In addition to providing ease to human lives with various applications, lens kits that can be integrated to mobile phones have recently been introduced. Fisheye lenses that are compliant with mobile phones are one of these new types of equipment. Since fisheye lenses integrated with mobile phones are lightweight and easy to use, they are advantageous. In addition to this advantage, whether fisheye lens and mobile phone combination can be used in a photogrammetric way is experimented, and if so, what will be the result. The main purpose of this study is to test fisheye lens equipment used with mobile phones. In this study, standard calibration of “Olloclip 3 in one” fisheye lens used with iPhone 4S mobile phone and “Nikon FC-E9” fisheye lens used with Nikon Coolpix8700 are compared based on equidistant model. The results of these calibrations are analyzed, using photogrammetric bundle block adjustment. This study suggests a precalibration process of these kinds of hardware for the photogrammetric process in the test field.

  1. Effects of Different Contact Lens Designs on Visual Quality Among the Soft Spherical Contact Lens Users

    Directory of Open Access Journals (Sweden)

    Mustafa Demir

    2013-10-01

    Full Text Available Purpose: To evaluate the effects of different lens designs on visual quality among soft spherical contact lens users. Material and Method: Forty eyes of twenty patients from our contact lens unit were included in this study. Refractive errors of the patients were between -0.50 and -6.0 diopters with 0.05. Total higher order aberration mean rms value was 0.29±0.10 µm without glasses, while it was 0.33±0.10 µm with Balafilcon A lenses and 0.31±0.10 µm with Senofilcon A lenses. Higher order aberration values measured after contact lens application did not show a significant difference for two contact lens designs (p>0.05. Discussion: High and low contrast sensitivity values were better with spectacles compared to contact lenses. We did not observe significant difference in higher order aberration values and visual quality between aspheric and spheric designed lenses. (Turk J Ophthalmol 2013; 43: 321-5

  2. Review of small aspheric glass lens molding technologies

    Science.gov (United States)

    Yin, Shaohui; Jia, Hongpeng; Zhang, Guanhua; Chen, Fengjun; Zhu, Kejun

    2017-01-01

    Aspheric lens can eliminate spherical aberrations, coma, astigmatism, field distortions, and other adverse factors. This type of lens can also reduce the loss of light energy and obtain high-quality images and optical characteristics. The demand for aspheric lens has increased in recent years because of its advantageous use in the electronics industry, particularly for compact, portable devices and high-performance products. As an advanced manufacturing technology, the glass lens molding process has been recognized as a low-cost and high-efficiency manufacturing technology for machining small-diameter aspheric lens for industrial production. However, the residual stress and profile deviation of the glass lens are greatly affected by various key technologies for glass lens molding, including glass and mold-die material forming, mold-die machining, and lens molding. These key technical factors, which affect the quality of the glass lens molding process, are systematically discussed and reviewed to solve the existing technical bottlenecks and problems, as well as to predict the potential applicability of glass lens molding in the future.

  3. Rho GTPase inactivation impairs lens growth and integrity.

    Science.gov (United States)

    Rao, Vasantha; Wawrousek, Eric; Tamm, Ernst R; Zigler, Samuel

    2002-02-01

    To elucidate the significance of Rho GTPase signaling on lens growth and structural integrity, we have selectively inactivated Rho GTPase in the ocular lens. To achieve this tissue-specific inactivation, a transgene encoding the C3-exoenzyme from Clostridium botulinum has been expressed in mice under transcriptional control of the lens-specific alphaA-crystallin promoter. C3-exoenzyme is known to selectively inactivate all Rho GTPase isoforms by ADP-ribosylating an asparagine residue at position 41. Mice expressing the C3-exoenzyme transgene exhibited selective ocular defects, including cataract and microphthalmia. Extralenticular effects included ocular hemorrhage (blood accumulation in the anterior and posterior chambers of the eye) and abnormalities of the iris including focal attachments to lens and cornea (synechiae). C3-transgene expression was found only in the lens and not in the other ocular tissues as determined by RT-PCR analysis. Histologic examination of the eyes of C3 transgenic mice from two independent lines revealed extensive abnormalities of the lens, including defective fiber cell differentiation and elongation, ruptured posterior lens capsule, and thickened anterior lens capsule. Electron microscopic analysis of hemorrhaged C3 eyes showed abnormalities in the posterior hyaloid vessels. Collectively these data reveal the importance of Rho GTPase signaling in regulating lens growth and maintenance of lens transparency.

  4. Radiation dose to the eye lens

    DEFF Research Database (Denmark)

    Baun, Christina; Falch Braas, Kirsten; D. Nielsen, Kamilla

    2015-01-01

    might avoid including the eye in the CT scan without losing sufficient visualization of the scull base. The aim of this study was to evaluate the possibility of decreasing the radiation dose to the eye lens, simply by changing the head position, when doing the PET/CT scan from the base of the scull......Radiation Dose to the Eye Lens: Does Positioning Really Matter? C. Baun1, K. Falch1, K.D. Nielsen2, S. Shanmuganathan1, O. Gerke1, P.F. Høilund-Carlsen1 1Department of Nuclear Medicine, Odense University Hospital, Odense C, Denmark. 2University College Lillebaelt, Odense, Denmark. Aim: The scan...... field in oncology patients undergoing eyes-to-thighs PET/CT must always include the base of the scull according to department guidelines. The eye lens is sensitive to radiation exposure and if possible it should be avoided to scan the eye. If the patient’s head is kipped backwards during the scan one...

  5. Adaptive Liquid Lens Actuated by Droplet Movement

    Directory of Open Access Journals (Sweden)

    Chao Liu

    2014-08-01

    Full Text Available In this paper we report an adaptive liquid lens actuated by droplet movement. Four rectangular PMMA (Polymethyl Methacrylate substrates are stacked to form the device structure. Two ITO (Indium Tin Oxide sheets stick on the bottom substrate. One PMMA sheet with a light hole is inserted in the middle of the device. A conductive droplet is placed on the substrate and touches the PMMA sheet to form a small closed reservoir. The reservoir is filled with another immiscible non-conductive liquid. The non-conductive liquid can form a smooth concave interface with the light hole. When the device is applied with voltage, the droplet stretches towards the reservoir. The volume of the reservoir reduces, changing the curvature of the interface. The device can thus achieve the function of an adaptive lens. Our experiments show that the focal length can be varied from −10 to −159 mm as the applied voltage changes from 0 to 65 V. The response time of the liquid lens is ~75 ms. The proposed device has potential applications in many fields such as information displays, imaging systems, and laser scanning systems.

  6. Achromobacter xylosoxidans keratitis after contact lens usage.

    Science.gov (United States)

    Park, Jung Hyun; Song, Nang Hee; Koh, Jae Woong

    2012-02-01

    To report on Achromobacter xylosoxidans keratitis in two healthy patients who had worn contact lenses foran extended period of time. A 36-year-old female and a 21-year-old female visited our hospital with ocular pain and blurred vision. Both patients had a history of wearing soft contact lenses for over fve years with occasional overnight wear. At the initial presentation, a slit lamp examination revealed corneal stromal infiltrations and epithelial defects with peripheral neovascularization in both patients. Microbiological examinations were performed from samples of corneal scrapings, contact lenses, contact lens cases, and solution. The culture resulting from the samples taken from the contact lenses, contact lens cases, and solution were all positive for Achromobacter xylosoxidans. Confrming that the direct cause of the keratitis was the contact lenses, the frst patient was prescribed ceftazidime and amikacin drops sensitive to Achromobacter xylosoxidans. The second patient was treated with 0.3% gatifoxacin and fortifed tobramycin drops. After treatment, the corneal epithelial defects were completely healed, and subepithelial corneal opacity was observed. Two cases of Achromobacter xylosoxidans keratitis were reported in healthy young females who wore soft contact lenses. Achromobacter xylosoxidans should be considered a rare but potentially harmful pathogen for lens-induced keratitis in healthy hosts.

  7. CYLINDER LENS ALIGNMENT IN THE LTP

    Energy Technology Data Exchange (ETDEWEB)

    TAKACS, P.Z.

    2005-07-26

    The Long Trace Profiler (LTP), is well-suited for the measurement of the axial figure of cylindrical mirrors that usually have a long radius of curvature in the axial direction but have a short radius of curvature in the sagittal direction. The sagittal curvature causes the probe beam to diverge in the transverse direction without coming to a focus on the detector, resulting in a very weak signal. It is useful to place a cylinder lens into the optical system above the mirror under test to refocus the sagittal divergence and increase the signal level. A positive cylinder lens can be placed at two positions above the surface: the Cat's Eye reflection position and the Wavefront-Matching position. The Cat's Eye position, is very tolerant to mirror misalignment, which is not good if absolute axial radius of curvature is to be measured. Lateral positioning and rotational misalignments of lens and the mirror combine to produce unusual profile results. This paper looks at various alignment issues with measurements and by raytrace simulations to determine the best strategy to minimize radius of curvature errors in the measurement of cylindrical aspheres.

  8. CMB lens sample covariance and consistency relations

    Science.gov (United States)

    Motloch, Pavel; Hu, Wayne; Benoit-Lévy, Aurélien

    2017-02-01

    Gravitational lensing information from the two and higher point statistics of the cosmic microwave background (CMB) temperature and polarization fields are intrinsically correlated because they are lensed by the same realization of structure between last scattering and observation. Using an analytic model for lens sample covariance, we show that there is one mode, separately measurable in the lensed CMB power spectra and lensing reconstruction, that carries most of this correlation. Once these measurements become lens sample variance dominated, this mode should provide a useful consistency check between the observables that is largely free of sampling and cosmological parameter errors. Violations of consistency could indicate systematic errors in the data and lens reconstruction or new physics at last scattering, any of which could bias cosmological inferences and delensing for gravitational waves. A second mode provides a weaker consistency check for a spatially flat universe. Our analysis isolates the additional information supplied by lensing in a model-independent manner but is also useful for understanding and forecasting CMB cosmological parameter errors in the extended Λ cold dark matter parameter space of dark energy, curvature, and massive neutrinos. We introduce and test a simple but accurate forecasting technique for this purpose that neither double counts lensing information nor neglects lensing in the observables.

  9. Retina projection using curved lens arrays

    Science.gov (United States)

    Yen, Hao-Ren; Su, Guo-Dung J.

    2016-09-01

    In this paper, we propose a multi-channel imaging system which combines the principles of an insect's compound eye and optical cluster eye. The system consists of two curved structure lens arrays with different pitches. Both of them have the same curvature and the radiuses of the lenses in the arrays are optimized to focus rays on the retina. The optical axes of different channels are tilted to each other in order to reduce the optical system volume and transmit a wide field of view. Each channel of an array of multiple optical system transfers only a part of the field of view. Each partial image passes through each channel and stitches together on the retina to reconstruct a complete image. In order to simulate the image stitching, we also build an eye model. The thickness from the panel to the last surface of lens group is less than 25mm. The panel size is designed to be 4 inch which is the scale of eyeglass. The system can provide a large field of view about 150 degrees which is much wider than the commercial products. By using the 3D printer, we can make a model of lens array to achieve our design.

  10. Pitfalls in aphakic contact lens fitting

    Directory of Open Access Journals (Sweden)

    Dada Vijay

    1990-01-01

    Full Text Available We examined 23 consecutive cases of unilateral aphakia reporting to the contact lens office for endothelial count and morphology, corneal thickness and toricity. The fellow eye served as a control in all the cases. It was found that there is a significant drop in the central endothelial cell density, and change in the size and shape of the cells. These observations indicate a thermodynamically unstable state. The aphakic corneas were thicker than the controls but not to a significant extent. The cell count and pachymetry had no statistical correlation. Toricity of the aphakic corneas make successful fitting of a lens difficult. Since prolonged use of extended wear gas permeable as well as hydrogel lenses have a deleterious effect on the endothelium it is suggested that a careful case selection be made and strict monitoting carried out at follow up. These corneas are liable for decompensation with only mild noxious stimuli. This article is intended to acquaint the ophthalmologist with the pitfalls in aphakic contact lens fitting so that a cautious follow up may be planned.

  11. Radiation dose to the eye lens

    DEFF Research Database (Denmark)

    Baun, Christina; Falch Braas, Kirsten; D. Nielsen, Kamilla

    2015-01-01

    .69 – 4.46). With the high dose protocol and position ‘kipped’, the radiation dose to the eye lens decreased by 41.5%, on average by 1.52 mSv (95% CI: 0.39-2.64; p=0.008) compared to ‘standard’, i.e., from 3.66 mSv (range 1.62 – 4.68) to 2.14 mSv (range 1.12 – 4.46). With the low dose protocol......Radiation Dose to the Eye Lens: Does Positioning Really Matter? C. Baun1, K. Falch1, K.D. Nielsen2, S. Shanmuganathan1, O. Gerke1, P.F. Høilund-Carlsen1 1Department of Nuclear Medicine, Odense University Hospital, Odense C, Denmark. 2University College Lillebaelt, Odense, Denmark. Aim: The scan...... might avoid including the eye in the CT scan without losing sufficient visualization of the scull base. The aim of this study was to evaluate the possibility of decreasing the radiation dose to the eye lens, simply by changing the head position, when doing the PET/CT scan from the base of the scull...

  12. Ultrasound field measurement using a binary lens

    CERN Document Server

    Clement, Gregory T; Kamakura, Tomoo

    2014-01-01

    Field characterization methods using a scattering target in the absence of a point-like receiver have been well described in which scattering is recorded by a relatively large receiver located outside the field of measurement. Unfortunately, such methods are prone to artifacts due to averaging across the receiver surface. To avoid this problem while simultaneously increasing the gain of a received signal, the present study introduces a binary plate lens designed to focus spherically-spreading waves onto a planar region having a nearly-uniform phase proportional to that of the target location. The lens is similar to a zone plate, but modified to produce a bi-convex-like behavior, such that it focuses both planar and spherically spreading waves. A measurement device suitable for characterizing narrowband ultrasound signals in air is designed around this lens by coupling it to a target and planar receiver. A prototype device is constructed and used to characterize the field of a highly-focused 400 kHz air transd...

  13. Plasma turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Horton, W. [Univ. of Texas, Austin, TX (United States). Inst. for Fusion Studies; Hu, G. [Globalstar LP, San Jose, CA (United States)

    1998-07-01

    The origin of plasma turbulence from currents and spatial gradients in plasmas is described and shown to lead to the dominant transport mechanism in many plasma regimes. A wide variety of turbulent transport mechanism exists in plasmas. In this survey the authors summarize some of the universally observed plasma transport rates.

  14. Novel Scanning Lens Instrument for Evaluating Fresnel Lens Performance: Equipment Development and Initial Results (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Herrero, R.; Miller, D. C.; Kurtz, S. R.; Anton, I.; Sala, G.

    2013-07-01

    A system dedicated to the optical transmittance characterization of Fresnel lenses has been developed at NREL, in collaboration with the UPM. The system quantifies the optical efficiency of the lens by generating a performance map. The shape of the focused spot may also be analyzed to understand change in the lens performance. The primary instrument components (lasers and CCD detector) have been characterized to confirm their capability for performing optical transmittance measurements. Measurements performed on SoG and PMMA lenses subject to a variety of indoor conditions (e.g., UV and damp heat) identified differences in the optical efficiency of the evaluated lenses, demonstrating the ability of the Scanning Lens Instrument (SLI) to distinguish between the aged lenses.

  15. Expression of Transforming Growth Factor-β in Cultured Normal Human Lens Epithelia Cells

    Institute of Scientific and Technical Information of China (English)

    黄渝侃; 魏厚仁

    2004-01-01

    Summary: In order to investigate whether cultured normal human lens epithelial cells (LEC) express transforming growth factor β (TGF-β), reverse transcriptase polymerase chain reaction (RTPCR) and immunohistochemical methods were used for detection of TGF-β mRNA and protein in cultured normal human LEC. The results showed that a single RT-PCR amplified product about 310bp was obtained, and the sequence was homologous to the known sequence. TGF-β immunostain was positive in the plasma of LEC. It was suggested that normal human LEC could produce TGF-β, and LEC could be affected by TGF-β through autocrine action.

  16. N-cadherin regulates signaling mechanisms required for lens fiber cell elongation and lens morphogenesis.

    Science.gov (United States)

    Logan, Caitlin M; Rajakaruna, Suren; Bowen, Caitlin; Radice, Glenn L; Robinson, Michael L; Menko, A Sue

    2017-08-01

    Tissue development and regeneration involve high-ordered morphogenetic processes that are governed by elements of the cytoskeleton in conjunction with cell adhesion molecules. Such processes are particularly important in the lens whose structure dictates its function. Studies of our lens-specific N-cadherin conditional knockout mouse (N-cadcKO) revealed an essential role for N-cadherin in the migration of the apical tips of differentiating lens fiber cells along the apical surfaces of the epithelium, a region termed the Epithelial Fiber Interface (EFI), that is necessary for normal fiber cell elongation and the morphogenesis. Studies of the N-cadcKO lens suggest that N-cadherin function in fiber cell morphogenesis is linked to the activation of Rac1 and myosin II, both signaling pathways central to the regulation of cell motility including determining the directionality of cellular movement. The absence of N-cadherin did not disrupt lateral contacts between fiber cells during development, and the maintenance of Aquaporin-0 and increased expression of EphA2 at cell-cell interfaces suggests that these molecules may function in this role. E-cadherin was maintained in newly differentiating fiber cells without interfering with expression of lens-specific differentiation proteins but was not able to replace N-cadherin function in these cells. The dependence of migration of the fiber cell apical domains along the EFI for lens morphogenesis on N-cadherin provides new insight into the process of tissue development. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Forensic Analysis of a Contact Lens in a Murder Case.

    Science.gov (United States)

    Zwerling, Charles S

    2016-03-01

    Contact lenses have had rare relevance in trials and/or investigations. After 5 years of burial, orbital remnants were retrieved from an exhumed body and subsequently identified as a key piece of material evidence in a murder trial. The exhumed case materials were evaluated under laboratory conditions and were determined to be contact lens remnants. Contact lens fracture and burial simulation studies were performed to provide additional corroboration of the physical findings of the exhumed contact lens remnants. This material evidence was instrumental in providing factual proof refuting the defendant's testimony in the murder trial. A brief history of contact lens composition and use is provided for understanding the methods and observational results. This forensic case study represents the first published documentation of a contact lens from an exhumed body being used in a murder investigation and establishes an operational procedure for future forensic contact lens examinations. © 2016 American Academy of Forensic Sciences.

  18. Spatial distribution of metabolites in the human lens.

    Science.gov (United States)

    Tamara, Semen O; Yanshole, Lyudmila V; Yanshole, Vadim V; Fursova, Anjella Zh; Stepakov, Denis A; Novoselov, Vladimir P; Tsentalovich, Yuri P

    2016-02-01

    Spatial distribution of 34 metabolites along the optical and equatorial axes of the human lens has been determined. For the majority of metabolites, the homogeneous distribution has been observed. That suggests that the rate of the metabolite transformation in the lens is low due to the general metabolic passivity of the lens fiber cells. However, the redox processes are active in the lens; as a result, some metabolites, including antioxidants, demonstrate the "nucleus-depleted" type of distribution, whereas secondary UV filters show the "nucleus-enriched" type. The metabolite concentrations at the lens poles and equator are similar for all metabolites under study. The concentric pattern of the "nucleus-depleted" and "nucleus-enriched" distributions testifies that the metabolite distribution inside the lens is mostly governed by a passive diffusion, relatively free along the fiber cells and retarded in the radial direction across the cells. No significant difference in the metabolite distribution between the normal and cataractous human lenses was found.

  19. Pink-beam focusing with a one-dimensional compound refractive lens.

    Science.gov (United States)

    Dufresne, Eric M; Dunford, Robert W; Kanter, Elliot P; Gao, Yuan; Moon, Seoksu; Walko, Donald A; Zhang, Xusheng

    2016-09-01

    The performance of a cooled Be compound refractive lens (CRL) has been tested at the Advanced Photon Source (APS) to enable vertical focusing of the pink beam and permit the X-ray beam to spatially overlap with an 80 µm-high low-density plasma that simulates astrophysical environments. Focusing the fundamental harmonics of an insertion device white beam increases the APS power density; here, a power density as high as 500 W mm(-2) was calculated. A CRL is chromatic so it does not efficiently focus X-rays whose energies are above the fundamental. Only the fundamental of the undulator focuses at the experiment. A two-chopper system reduces the power density on the imaging system and lens by four orders of magnitude, enabling imaging of the focal plane without any X-ray filter. A method to measure such high power density as well as the performance of the lens in focusing the pink beam is reported.

  20. Plasma harmonics

    CERN Document Server

    Ganeev, Rashid A

    2014-01-01

    Preface; Why plasma harmonics? A very brief introduction Early stage of plasma harmonic studies - hopes and frustrations New developments in plasma harmonics studies: first successes Improvements of plasma harmonics; Theoretical basics of plasma harmonics; Basics of HHG Harmonic generation in fullerenes using few-cycle pulsesVarious approaches for description of observed peculiarities of resonant enhancement of a single harmonic in laser plasmaTwo-colour pump resonance-induced enhancement of odd and even harmonics from a tin plasmaCalculations of single harmonic generation from Mn plasma;Low-o

  1. Lens rigidity with trapped geodesics in two dimensions

    CERN Document Server

    Croke, Christopher B

    2011-01-01

    We consider the scattering and lens rigidity of compact surfaces with boundary that have a trapped geodesic. In particular we show that the flat cylinder and the flat M\\"obius strip are determined by their lens data. We also see by example that the flat M\\"obius strip is not determined by it's scattering data. We then consider the case of negatively curved cylinders with convex boundary and show that they are lens rigid.

  2. The action of selenite on ATP synthesis in rat lens

    OpenAIRE

    Adamchak, Marsha Ann

    1986-01-01

    A subcutaneous injection of sodium selenite (30 umol/kg body weight) in 10â day old rats produced a cataract within 72 hours. Lens opacification was preceded by a 15% decrease in ATP content. Lens ATP did not fully recover to control concentrations by 11 days postâ injection. A moderate correlation existed between lens weight and total ATP content in control lenses

  3. Recent development of plasma optical systems (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Goncharov, A. A., E-mail: gonchar@iop.kiev.ua [Institute of Physics, National Academy of Science, Kiev 03028 (Ukraine)

    2016-02-15

    The article devotes a brief description of the recent development and current status of an ongoing research of plasma optical systems based on the fundamental plasma optical idea magnetic electron isolation, equipotentialization magnetic field lines, and the axi-symmetric cylindrical electrostatic plasma lens (PL) configuration. The experimental, theoretical, and simulation investigations have been carried out over recent years collaboratively between IP NASU (Kiev), LBNL (Berkeley, USA), and HCEI RAS (Tomsk). The crossed electric and magnetic fields inherent the PL configuration that provides the attractive method for establishing a stable plasma discharge at low pressure. Using PL configuration, several high reliability plasma devices were developed. These devices are attractive for many high-tech applications.

  4. 600 Volt Stretched Lens Array for Solar Electric Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — ENTECH, Auburn, NASA, and others have recently developed a new space photovoltaic array called the Stretched Lens Array (SLA), offering unprecedented performance...

  5. INHIBITION OF RAT LENS ALDOSE REDUCTASE BY QUERCETAGETIN AND PATULETIN

    Institute of Scientific and Technical Information of China (English)

    1991-01-01

    In this paper the results of inhibition of the Aldose reductase(AR) activity on Wistar rat lens by Quercetagetin extracted from Tagetes erects Linn and by Patuletin extracted from Tagetes patula Linn are reported.Quercetagetin inhibited AR of the rat lens by 93.9% at 10~(-4)M, 76.0% at 10~(-5)M and 13.3% at 10~(-6)M. Patuletin inhibited AR of the rat lens by 100% at 10~(-1)M, 80% at 10~(-5)M and 22.7% at 10~(-6)M respectively. The results show that these two flavones are lens AR Inhibitors, but further ...

  6. Electromagnetic Mathematical Modeling of 3D Supershaped Dielectric Lens Antennas

    Directory of Open Access Journals (Sweden)

    L. Mescia

    2016-01-01

    Full Text Available The electromagnetic analysis of a special class of 3D dielectric lens antennas is described in detail. This new class of lens antennas has a geometrical shape defined by the three-dimensional extension of Gielis’ formula. The analytical description of the lens shape allows the development of a dedicated semianalytical hybrid modeling approach based on geometrical tube tracing and physical optic. In order to increase the accuracy of the model, the multiple reflections occurring within the lens are also taken into account.

  7. Seeing lens imaging as a superposition of multiple views

    CERN Document Server

    Grusche, Sascha

    2015-01-01

    In the conventional approach to lens imaging, rays are used to map object points to image points. However, many students have a need to think of the image as a whole. To answer this need, lens imaging is reinterpreted as a superposition of sharp images from different viewpoints. These so-called elemental images are uncovered by covering the lens with a pinhole array. Rays are introduced to connect elemental images. Lens ray diagrams are constructed based on bundles of elemental images. The conventional construction method is included as a special case. The proposed approach proceeds from concrete images to abstract rays.

  8. Lens regeneration in mice under the influence of vitamin A

    Indian Academy of Sciences (India)

    Digvijay Singh Shekhawat; O P Jangir; Acharya Prakash; Suthar Pawan

    2001-12-01

    The effect of vitamin A has been studied on lens regeneration in young (7 days old) as well as adult mice. A longitudinal slit was made under local anesthesia in the cornea over the lens. The lens was extracted intact through the incision. Intraperitonial injection of vitamin A (0.05 ml of 30 IU/ml in young and 0.05 ml of 50 IU/ml in adult) was given to the operated animals. Vitamin A was found to induce lens regeneration in not only young but also in adult mice. Regenerated lenses were similar in shape, size, transparency and histological features to normal intact lenses.

  9. Lens regeneration in axolotl: new evidence of developmental plasticity

    Directory of Open Access Journals (Sweden)

    Suetsugu-Maki Rinako

    2012-12-01

    Full Text Available Abstract Background Among vertebrates lens regeneration is most pronounced in newts, which have the ability to regenerate the entire lens throughout their lives. Regeneration occurs from the dorsal iris by transdifferentiation of the pigment epithelial cells. Interestingly, the ventral iris never contributes to regeneration. Frogs have limited lens regeneration capacity elicited from the cornea during pre-metamorphic stages. The axolotl is another salamander which, like the newt, regenerates its limbs or its tail with the spinal cord, but up until now all reports have shown that it does not regenerate the lens. Results Here we present a detailed analysis during different stages of axolotl development, and we show that despite previous beliefs the axolotl does regenerate the lens, however, only during a limited time after hatching. We have found that starting at stage 44 (forelimb bud stage lens regeneration is possible for nearly two weeks. Regeneration occurs from the iris but, in contrast to the newt, regeneration can be elicited from either the dorsal or the ventral iris and, occasionally, even from both in the same eye. Similar studies in the zebra fish concluded that lens regeneration is not possible. Conclusions Regeneration of the lens is possible in the axolotl, but differs from both frogs and newts. Thus the axolotl iris provides a novel and more plastic strategy for lens regeneration.

  10. A Novel Fisheye-Lens-Based Photoacoustic System

    Science.gov (United States)

    Choi, Hojong; Ryu, Jaemyung; Kim, Jungsuk

    2016-01-01

    This paper presents a novel fisheye-lens-based photoacoustic (PA) system. In conventional PA systems, mechanical motors are utilized to obtain the target information due to the small fields of view of such systems. The use of such motors introduces mechanical noise, which is difficult to remove when processing the echo signals. A fisheye lens system offering a wide field of view would effectively reduce the motor effects (i.e., the noise) and enable the system to have a wide field of view. Therefore, in this work, we propose a novel fisheye lens scheme and describe a PA system based on the developed lens scheme. In addition, to confirm the feasibility of the fisheye-lens-based PA system, we present the typical pulse-echo responses obtained using a 20 MHz single element immersion transducer and the echo signals measured from bull’s eye tissue samples separated by approximately 4, 6, 8, and 10 cm diagonally and 2 cm vertically from the fisheye lens. The experimental results demonstrate that the echo signal amplitudes, their center frequencies, and the −6 dB bandwidths obtained using red, green, and blue lights and a fisheye lens are acceptable when the fisheye lens is separated from a sample both diagonally and vertically. Therefore, fisheye-lens-based PA systems could be a potential method of achieving wide fields of view while reducing the mechanical motor effects. PMID:27999376

  11. An Ultrasonic Lens Design Based on Prefractal Structures

    Directory of Open Access Journals (Sweden)

    Sergio Castiñeira-Ibáñez

    2016-04-01

    Full Text Available The improvement in focusing capabilities of a set of annular scatterers arranged in a fractal geometry is theoretically quantified in this work by means of the finite element method (FEM. Two different arrangements of rigid rings in water are used in the analysis. Thus, both a Fresnel ultrasonic lens and an arrangement of rigid rings based on Cantor prefractals are analyzed. Results show that the focusing capacity of the modified fractal lens is better than the Fresnel lens. This new lens is believed to have potential applications for ultrasonic imaging and medical ultrasound fields.

  12. Effects of Coupling Lens on Optical Refrigeration of Semiconductors

    Institute of Scientific and Technical Information of China (English)

    DING Kai; ZENG Yi-Ping

    2008-01-01

    Optical refrigeration of semiconductors is encountering efficiency difficulties caused by nonradiative recombination and luminescence trapping.A commonly used approach for enhancing luminescence efficiency of a semiconductor device is coupling a lens with the device. We quantitatively study the effects of a coupling lens on optical refrigeration based on rate equations and photon recycling,and calculated cooling efficiencies of different coupling mechanisms and of different lens materials.A GaAs/GaInP heterostructure coupled with a homo-epitaxial GaInP hemispherical lens is recommended.

  13. Amounts of phospholipids and cholesterol in lipid domains formed in intact lens membranes: Methodology development and its application to studies of porcine lens membranes.

    Science.gov (United States)

    Raguz, Marija; Mainali, Laxman; O'Brien, William J; Subczynski, Witold K

    2015-11-01

    An electron paramagnetic resonance spin-labeling method has been developed that allows quantitative evaluation of the amounts of phospholipids and cholesterol in lipid domains of intact fiber-cell plasma membranes isolated from cortical and nuclear regions of eye lenses. The long term goal of this research is the assessment of organizational changes in human lens fiber cell membranes that occur with age and during cataract development. The measurements needed to be performed on lens membranes prepared from eyes of single donors and from single eyes. For these types of studies it is necessary to separate the age/cataract related changes from preparation/technique related changes. Human lenses differ not only because of age, but also because of the varying health histories of the donors. To solve these problems the sample-to-sample preparation/technique related changes were evaluated for cortical and nuclear lens membranes prepared from single porcine eyes. It was assumed that the differences due to the age (animals were two year old) and environmental conditions for raising these animals were minimal. Mean values and standard deviations from preparation/technique changes for measured amounts of lipids in membrane domains were calculated. Statistical analysis (Student's t-test) of the data also allowed determining the differences of mean values which were statistically significant with P ≤ 0.05. These differences defined for porcine lenses will be used for comparison of amounts of lipids in domains in human lens membranes prepared from eyes of single donors and from single eyes. Greater separations will indicate that differences were statistically significant with (P ≤ 0.05) and that they came from different than preparation/technique sources. Results confirmed that in nuclear porcine membranes the amounts of lipids in domains created due to the presence of membrane proteins were greater than those in cortical membranes and the differences were larger than

  14. Patient comfort following thirty minutes of lens wear: piggy-back versus conventional rigid-lens wear

    Directory of Open Access Journals (Sweden)

    W. D.H. Gillan

    2014-08-01

    Full Text Available Discomfort when wearing contact lenses, especially rigid contact lenses, is a common complaint amongst neophyte as well as experienced contact lens wearers. Wearing a piggy-back system of contact lenses has been shown to improve comfort and wearing time, especially in keratoconic subjects. Twenty two normal subjects wore a rigid lens or a piggy-back system of lenses for thirty minutes and after a thirty minute break swopped the mode of lens wear and wore the second modality for a thirty minute period. This study suggests that a piggy-back lens system provides improved comfort compared to wearing a rigid lens on its own. The order of lens wear might, however, influence the perceived comfort.

  15. Plasma surface modification of rigid contact lenses decreases bacterial adhesion.

    Science.gov (United States)

    Wang, Yingming; Qian, Xuefeng; Zhang, Xiaofeng; Xia, Wei; Zhong, Lei; Sun, Zhengtai; Xia, Jing

    2013-11-01

    Contact lens safety is an important topic in clinical studies. Corneal infections usually occur because of the use of bacteria-carrying contact lenses. The current study investigated the impact of plasma surface modification on bacterial adherence to rigid contact lenses made of fluorosilicone acrylate materials. Boston XO and XO2 contact lenses were modified using plasma technology (XO-P and XO2-P groups). Untreated lenses were used as controls. Plasma-treated and control lenses were incubated in solutions containing Staphylococcus aureus or Pseudomonas aeruginosa. MTT colorimetry, colony-forming unit counting method, and scanning electron microscopy were used to measure bacterial adhesion. MTT colorimetry measurements showed that the optical density (OD) values of XO-P and XO2-P were significantly lower than those of XO and XO2, respectively, after incubation with S. aureus (P plasma technology in contact lens surface modification.

  16. The BOSS Emission-Line Lens Survey. IV. : Smooth Lens Models for the BELLS GALLERY Sample

    CERN Document Server

    Shu, Yiping; Mao, Shude; Kochanek, Christopher S; Pérez-Fournon, Ismael; Oguri, Masamune; Montero-Dorta, Antonio D; Cornachione, Matthew A; Marques-Chaves, Rui; Zheng, Zheng; Brownstein, Joel R; Ménard, Brice

    2016-01-01

    We present \\textsl{Hubble Space Telescope} (\\textsl{HST}) F606W-band imaging observations of 21 galaxy-Ly$\\alpha$ emitter lens candidates in the Baryon Oscillation Spectroscopic Survey (BOSS) Emission-Line Lens Survey (BELLS) for GALaxy-Ly$\\alpha$ EmitteR sYstems (BELLS GALLERY) survey. 17 systems are confirmed to be definite lenses with unambiguous evidence of multiple imaging. The lenses are primarily massive early-type galaxies (ETGs) at redshifts of approximately $0.55$, while the lensed sources are Ly$\\alpha$ emitters (LAEs) at redshifts from 2 to 3. Although the \\textsl{HST} imaging data are well fit by smooth lens models consisting of singular isothermal ellipsoids in an external shear field, a thorough exploration of dark substructures in the lens galaxies is required. The Einstein radii of the BELLS GALLERY lenses are on average $60\\%$ larger than those of the BELLS lenses because of the much higher source redshifts which will allow a detailed investigation of the radius evolution of the mass profile...

  17. FOCUSING BY A HIGH-POWER, LOW-FRESNEL-NUMBER LENS - THE FLY FACET LENS

    NARCIS (Netherlands)

    STAVENGA, DG; VANHATEREN, JH

    1991-01-01

    Diffraction by fly facet lenses has been investigated by photographing the diffraction patterns at various distances from a facet lens whose power was estimated to be 2.03 x 10(4) D. We studied three different aperture diameters with Fresnel numbers of the order of unity. A large focal shift was pro

  18. Focusing by a high-power, low-Fresnel-number lens : the fly facet lens

    NARCIS (Netherlands)

    Stavenga, D.G.; Hateren, J.H. van

    1991-01-01

    Diffraction by fly facet lenses has been investigated by photographing the diffraction patterns at various distances from a facet lens whose power was estimated to be 2.03 x 10(4) D. We studied three different aperture diameters with Fresnel numbers of the order of unity. A large focal shift was pro

  19. An "ESA-affordable" Laue-lens

    DEFF Research Database (Denmark)

    Lund, Niels

    2005-01-01

    With ESA's INTEGRAL mission gamma-ray astronomy has advanced to the point where major scientific advances must be expected from detailed studies of the many new point sources. The interest in developing focusing telescopes operating in the soft gamma-ray regime up to 1 MeV is therefore mounting...... constraints of a specific medium size launch vehicle. The introduction of the lens mass as a primary design driver has some surprising effects for the choice of material for the crystals and new tradeoff considerations are introduced....

  20. LensTools: Weak Lensing computing tools

    Science.gov (United States)

    Petri, A.

    2016-02-01

    LensTools implements a wide range of routines frequently used in Weak Gravitational Lensing, including tools for image analysis, statistical processing and numerical theory predictions. The package offers many useful features, including complete flexibility and easy customization of input/output formats; efficient measurements of power spectrum, PDF, Minkowski functionals and peak counts of convergence maps; survey masks; artificial noise generation engines; easy to compute parameter statistical inferences; ray tracing simulations; and many others. It requires standard numpy and scipy, and depending on tools used, may require Astropy (ascl:1304.002), emcee (ascl:1303.002), matplotlib, and mpi4py.

  1. Polarization response of RHIC electron lens lattices

    Directory of Open Access Journals (Sweden)

    V. H. Ranjbar

    2016-10-01

    Full Text Available Depolarization response for a system of two orthogonal snakes at irrational tunes is studied in depth using lattice independent spin integration. In particular we consider the effect of overlapping spin resonances in this system, to understand the impact of phase, tune, relative location and threshold strengths of the spin resonances. These results are benchmarked and compared to two dimensional direct tracking results for the RHIC e-lens lattice and the standard lattice. Finally we consider the effect of longitudinal motion via chromatic scans using direct six dimensional lattice tracking.

  2. Elastic constants of the human lens capsule.

    Science.gov (United States)

    Fisher, R F

    1969-03-01

    1. A technique is described whereby the elasticity of the human lens capsule has been determined at birth and throughout life. This technique requires three separate determinations: (a) thickness; (b) stress and strain; (c) Poisson's ratio; (a) the capsule was clamped between accurately perforated ground glass plates and its thickness determined by noting the change in depth of focus between Latex spherules adhering to its upper and lower surfaces; (b) the undisturbed capsule was then placed in a specially designed glass distension apparatus and the relationship between volume and pressure recorded when it was distended with isotonic saline. The permeability of the capsule was also measured; (c) in some cases Poisson's ratio was determined by measuring the change of thickness of the capsule and the height to which it rose when distended with isotonic saline at different pressures. An apparatus was designed for this purpose.2. The average thickness of the anterior capsule increases from birth until about the 60th year but thereafter it decreases slightly.3. Poisson's ratio was about 0.47 for both cat and human capsule, and no significant variations with age in human capsule could be detected.4. Corrected volume pressure curves obeyed Hook's law almost to the point of capsule rupture.5. In childhood Young's Modulus of elasticity is about 6 x 10(7) dyn/cm(2) and decreases to 3 x 10(7) dyn/cm(2) at 60 and 1.5 x 10(7) dyn/cm(2) in extreme old age.6. The ultimate tensile stress was 2.3 x 10(7) dyn/cm(2) in young capsules and 0.7 x 10(7) dyn/cm(2) in old ones. The maximum percentage elongation was 29 per cent and independent of age.7. The implications of these findings are discussed in relation to(a) the mechanical properties of the lens capsule;(b) the ageing of the lens capsule and basement membranes; and(c) the decrease in elasticity of the lens capsule as a cause of presbyopia.

  3. CATARACT SURGERY AND INTRAOCULAR LENS POWER CALCULATION IN A PATIENT WITH ANTERIOR MEGALOPHTHALMOS WITH NORMAL SIZED CRYSTALLINE LENS; CASE REPORT

    Directory of Open Access Journals (Sweden)

    Glišić Selimir

    2015-12-01

    Full Text Available Cataract surgery and intraocular lens power calculation is challenging in patients with anterior megalophthalmos and cataract, with postoperative refractive surprise frequently reported. Deep anterior chamber in these patients substantially influence effective lens position. To minimize possibility of refractive surprise, we used Haigis formula that takes into account anterior chamber depth in the lens power calculation for our patient. Cataract was managed by phakoemulsification with standard intraocular lens implanted in the capsular bag. Postoperatively, satisfying refractive result was achieved and refractive surprise was avoided.

  4. Comparison of Strong Gravitational Lens Model Software II. HydraLens: Computer-Assisted Strong Gravitational Lens Model Generation and Translation

    CERN Document Server

    Lefor, Alsn T

    2015-01-01

    The behavior of strong gravitational lens model software in the analysis of lens models is not necessarily consistent among the various software available, suggesting that the use of several models may enhance the understanding of the system being studied. Among the publicly available codes, the model input files are heterogeneous, making the creation of multiple models tedious. An enhanced method of creating model files and a method to easily create multiple models, may increase the number of comparison studies. HydraLens simplifies the creation of model files for four strong gravitational lens model software packages, including Lenstool, Gravlens/Lensmodel, glafic and PixeLens, using a custom designed GUI for each of the four codes that simplifies the entry of the model for each of these codes, obviating the need for user manuals to set the values of the many flags and in each data field. HydraLens is designed in a modular fashion, which simplifies the addition of other strong gravitational lens codes in th...

  5. Out-of-the-bag intraocular lens dislocation: outcomes of posterior chamber intraocular lens exchange, risk factors, and prevention

    Institute of Scientific and Technical Information of China (English)

    ZHENG Dan-ying; CHEN Li-na; SUN Yi; SHAO Ying-feng; LIANG Jing-li; LIU Yi-zhi

    2010-01-01

    Background Dislocation of posterior chamber intraocular lens is one of the most common complications of intraocular lens implantation. Lens exchange is an effective solution to this unsatisfactory status. This study was conducted to analyze the possible predisposing factors for out-of-the-bag posterior chamber intraocular lens dislocation and to study the outcomes of lens exchange surgery.Methods Thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation who underwent posterior chamber intraocular lens exchange in Zhongshan Ophthalmic Center of Sun Yat-sen University (Guangdong,China) from January 2003 to October 2009 were included. A 6-month follow-up was completed. The causes for out-of-the-bag intraocular lens dislocation and visual outcomes of posterior chamber intraocular lens exchange were analyzed. The out-of-the-bag intraocular lens dislocation was diagnosed on the basis of the findings from slit-lamp microscope and B-ultrasound. The dislocated intraocular lens was explanted. Reimplantation of a new posterior chamber intraocular lens was performed in each case using standardized surgical procedures.Results In this study, a total of thirty-six consecutive patients (36 eyes) with out-of-the-bag intraocular lens dislocation underwent posterior chamber intraocular lens exchange surgery. Causes for out-of-the-bag intraocular lens dislocation included posterior capsule rupture during the initial cataract extraction procedure (23 eyes, 63.8%), trauma (5 eyes,13.9%), neodymium-doped yttrium aluminium garnet (Nd:YAG) laser-induced dislocation (2 eyes, 5.6%), the status after vitrectomy (2 eyes, 5.6%) and unidentifiable etiology (4 eyes, 11.1%). Symptoms of these patients mainly included decrease in visual acuity (17 cases, 47.2%), blurred vision (16 cases, 44.4%), glare (1 case, 2.8%), diplopia (1 case,2.8%), and halo (1 case, 2.8%). Intraocular lens dislocation into the posterior vitreous cavity (29 eyes, 80.5%), anterior chamber (1

  6. Fusarium and Candida albicans biofilms on soft contact lenses: model development, influence of lens type and susceptibility to lens care solutions

    Science.gov (United States)

    Fungal keratitis is commonly caused by Fusarium species, while cases of Candida-associated keratitis are less frequent. Recent outbreaks of Fusarium keratitis were associated with contact lens wear and with MoistureLoc contact lens care solution, and biofilm formation on contact lens/lens cases was...

  7. Dusty plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Fortov, Vladimir E; Khrapak, Aleksei G; Molotkov, Vladimir I; Petrov, Oleg F [Institute for High Energy Densities, Associated Institute for High Temperatures, Russian Academy of Sciences, Moscow (Russian Federation); Khrapak, Sergei A [Max-Planck-Institut fur Extraterrestrische Physik, Garching (Germany)

    2004-05-31

    The properties of dusty plasmas - low-temperature plasmas containing charged macroparticles - are considered. The most important elementary processes in dusty plasmas and the forces acting on dust particles are investigated. The results of experimental and theoretical investigations of different states of strongly nonideal dusty plasmas - crystal-like, liquid-like, gas-like - are summarized. Waves and oscillations in dusty plasmas, as well as their damping and instability mechanisms, are studied. Some results on dusty plasma investigated under microgravity conditions are presented. New directions of experimental research and potential applications of dusty plasmas are discussed. (reviews of topical problems)

  8. High Dk piggyback contact lens system for contact lens-intolerant keratoconus patients

    Directory of Open Access Journals (Sweden)

    Tomris Sengor

    2011-03-01

    Full Text Available Tomris Sengor, Sevda Aydin Kurna, Suat Aki, Yelda ÖzkurtFatih Sultan Mehmet Training and Research Hospital, Istanbul, TurkeyBackground: The aim of the study was to examine the clinical success of high Dk (oxygen permeability piggyback contact lens (PBCL systems for the correction of contact lens intolerant keratoconus patients.Methods: Sixteen patients (29 eyes who were not able to wear gas-permeable rigid lenses were included in this study. Hyper Dk silicone hydrogel (oxygen transmissibility or Dk/t = 150 units and fluorosilicone methacrylate copolymer (Dk/t = 100 units lenses were chosen as the PBCL systems. The clinical examinations included visual acuity and corneal observation by biomicroscopy, keratometer reading, and fluorescein staining before and after fitting the PBCL system.Results: Indications for using PBCL system were: lens stabilization and comfort, improving comfort, and adding protection to the cone. Visual acuities increased significantly in all of the patients compared with spectacles (P = 0. Improvement in visual acuity compared with rigid lenses alone was recorded in 89.7% of eyes and no alteration of the visual acuity was observed in 10.3% of the eyes. Wearing time of PBCL systems for most of the patients was limited time (mean 6 months, range 3–12 months; thereafter they tolerated rigid lenses alone except for 2 patients.Conclusion: The PBCL system is a safe and effective method to provide centering and corneal protection against mechanical trauma by the rigid lenses for keratoconus patients and may increase contact lens tolerance.Keywords: piggyback contact lens, keratoconus, irregular astigmatism

  9. DYNAMIC SPECTRAL MAPPING OF INTERSTELLAR PLASMA LENSES

    Energy Technology Data Exchange (ETDEWEB)

    Tuntsov, Artem V.; Walker, Mark A. [Manly Astrophysics, 3/22 Cliff Street, Manly 2095 (Australia); Koopmans, Leon V. E. [Kapteyn Astronomical Institute, University of Groningen, P.O. Box 800, NL-9700 AV Groningen (Netherlands); Bannister, Keith W.; Stevens, Jamie; Johnston, Simon [CSIRO Astronomy and Space Science, P.O. Box 76, Epping NSW 1710 (Australia); Reynolds, Cormac; Bignall, Hayley E., E-mail: Artem.Tuntsov@manlyastrophysics.org, E-mail: Mark.Walker@manlyastrophysics.org, E-mail: koopmans@astro.rug.nl [International Centre for Radio Astronomy Research—Curtin University, Perth (Australia)

    2016-02-01

    Compact radio sources sometimes exhibit intervals of large, rapid changes in their flux density, due to lensing by interstellar plasma crossing the line of sight. A novel survey program has made it possible to discover these “Extreme Scattering Events” (ESEs) in real time, resulting in a high-quality dynamic spectrum of an ESE observed in PKS 1939–315. Here we present a method for determining the column-density profile of a plasma lens, given only the dynamic radio spectrum of the lensed source, under the assumption that the lens is either axisymmetric or totally anisotropic. Our technique relies on the known, strong frequency dependence of the plasma refractive index in order to determine how points in the dynamic spectrum map to positions on the lens. We apply our method to high-frequency (4.2–10.8 GHz) data from the Australia Telescope Compact Array of the PKS 1939–315 ESE. The derived electron column-density profiles are very similar for the two geometries we consider, and both yield a good visual match to the data. However, the fit residuals are substantially above the noise level, and deficiencies are evident when we compare the predictions of our model to lower-frequency (1.6–3.1 GHz) data on the same ESE, thus motivating future development of more sophisticated inversion techniques.

  10. Dynamic spectral mapping of interstellar plasma lenses

    CERN Document Server

    Tuntsov, Artem V; Koopmans, Leon V E; Bannister, Keith W; Stevens, Jamie; Johnston, Simon; Reynolds, Cormac; Bignall, Hayley E

    2015-01-01

    Compact radio sources sometimes exhibit intervals of large, rapid changes in their flux-density, due to lensing by interstellar plasma crossing the line-of-sight. A novel survey program has made it possible to discover these "Extreme Scattering Events" (ESEs) in real time, resulting in a high-quality dynamic spectrum of an ESE observed in PKS 1939-315. Here we present a method for determining the column-density profile of a plasma lens, given only the dynamic radio spectrum of the lensed source, under the assumption that the lens is either axisymmetric or totally anisotropic. Our technique relies on the known, strong frequency dependence of the plasma refractive index in order to determine how points in the dynamic spectrum map to positions on the lens. We apply our method to high-frequency (4.2-10.8 GHz) data from the Australia Telescope Compact Array of the PKS 1939-315 ESE. The derived electron column-density profiles are very similar for the two geometries we consider, and both yield a good visual match t...

  11. Dose limits to the eye lens

    Energy Technology Data Exchange (ETDEWEB)

    Sion, N.

    2016-09-15

    Protecting the human body from the effects of ionizing radiation is essential to forestall stochastic effects and require placing limits on the effective dose. Dose limits on specific organs are also necessary to reduce the deterministic effects and tissue reactions. The standard for radiation protection was ISO 15382 (2002) which mainly dealt with beta radiation for nuclear power plant workers. Clearly an update is required to allow for new technology and the proliferative use of radiation in medical practices. There is a need for more explicit radiation monitoring to operators and staff. ICRP118 (International Commission on Radiological Protection), Ref. 1, evolved their recommendations to include eye lens doses as a follow on to their publication 103 and to focus on radiation exposures. It provides updated estimates of 'practical' threshold doses for tissue injury at the level of 1% incidence. This paper discusses the current status and the recommendation for a drastic reduction of the dose limit to the eye lens. (author)

  12. Tubular astigmatism-tunable fluidic lens.

    Science.gov (United States)

    Kopp, Daniel; Zappe, Hans

    2016-06-15

    We demonstrate a new means to fabricate three-dimensional liquid lenses which may be tuned in focal length and astigmatism. Using actuation by electrowetting-on-dielectrics, astigmatism in arbitrary directions may be tuned independently, with almost no cross talk between orthogonal orientations. The lens is based on electrodes structured on planar polyimide foils and subsequently rolled, enabling high-resolution patterning of complex electrodes along the azimuthal and radial directions of the lens. Based on a design established through fluidic and optical simulations, the astigmatism tuning is experimentally verified by a change of the corresponding Zernike coefficients measured using a Shack-Hartmann wavefront sensor. It was seen that the back focal length can be tuned by 5 mm and 0° and 45° astigmatism by 3 μm through application of voltages in the range of 50  Vrms. It was observed that the cross talk with other aberrations is very low, suggesting a novel means for astigmatism control in imaging systems.

  13. Pharmacognostic evaluation of Lens culinaris Medikus seeds

    Institute of Scientific and Technical Information of China (English)

    Kripi Vohra; Vivek Kumar Gupta

    2012-01-01

    Objective: To present a detailed pharmacognostic study of the Lens culinaris Medikus (Fabaceae) seeds, a food grain used as Dhal in India. Methods: The macroscopy, microscopy, fluorescence analysis of powdered drug, physicochemical analysis, preliminary testing and other WHO recommended methods for standardization were investigated. Results: Seeds are greyish brown in colour. Treatment of powdered drug with various chemical reagents showed the presence of proteins, cellulose, lignins and fixed oils. Microscopy of seeds revealed the presence of starch grains in seed. The colour of seed coat changed from brown to greenish grey in day light and brown to black at 254nm when treated with acetic acid. Total ash value of the seeds was found to be 1.86% w/w whereas foreign organic matter was found to be nil. Qualitative phytochemical analysis revealed the presence of tannins and flavonoids in acetone extract. Conclusions: The present study on pharmacognostic profile of Lens culinaris Medikus seeds provides an important tool in identification and authentication of this plant to researchers in future.

  14. Scleral lens for keratoconus: technology update

    Directory of Open Access Journals (Sweden)

    Rathi VM

    2015-10-01

    Full Text Available Varsha M Rathi,1 Preeji S Mandathara,2 Mukesh Taneja,1 Srikanth Dumpati,1 Virender S Sangwan1 1L V Prasad Eye Institute, Hyderabad, India; 2School of Optometry and Vision Science, University of New South Wales, Kensington, NSW, Australia Abstract: Scleral lenses are large diameter lenses which rest over the sclera, unlike the conventional contact lenses which rest on the cornea. These lenses are fitted to not touch the cornea and there is a space created between the cornea and the lens. These lenses are inserted in the eyes after filling with sterile isotonic fluid. Generally, scleral contact lenses are used for high irregular astigmatism as seen in various corneal ectatic diseases such as keratoconus, pellucid marginal degeneration, or/and as liquid bandage in ocular surface disorders. In this article, we review the new developments, that have taken place over the years, in the field of scleral contact lenses as regard to new designs, materials, manufacturing technologies, and fitting strategies particularly for keratoconus. Keywords: keratoconus, scleral lens, technology update, PROSE

  15. Contact lens-related acanthamoeba keratitis.

    Science.gov (United States)

    Stapleton, Fiona; Ozkan, Jerome; Jalbert, Isabelle; Holden, Brien A; Petsoglou, Con; McClellan, Kathy

    2009-10-01

    Acanthamoeba keratitis is a rare but severe disease, with more than 95% of cases occurring in contact lens wearers. With a worldwide resurgence of contact lens-related disease, this report illustrates the clinical characteristics and treatment challenges representative of this disease. This report describes Acanthamoeba keratitis in a 47-year-old female using extended wear silicone hydrogel contact lenses, with a history of swimming in a home pool and failure to subsequently disinfect the contact lenses. The diagnosis was based on clinical signs, disease course, and confocal microscopy results despite a negative result for corneal smear and culture. The corneal signs included an epithelial defect, epithelial irregularities, anterior stromal infiltrates, perineural infiltrates, an anterior stromal ring infiltrate, and hypopyon. The case was diagnosed as an infective keratitis and treated promptly using intensive topical administration of fortified gentamicin and cephalothin. The high likelihood Acanthamoeba prompted immediate use of polyhexamethylbiguanide and chlorhexidine, with propamide and adjunct treatment using atropine and oral diclofenac. Steroids were added on day 3, and the frequency of administration of antibacterial treatment was gradually reduced and ceased by day 10. The analgesia was stopped at 3 months. The frequency of administration of antiamoeba therapy and steroid treatment was slowly reduced and all treatment was ceased after 18 months. Despite considerable morbidity in terms of the treatment duration, hospitalization, outpatient appointments, and associated disease costs, the final visual outcome (6/6) was excellent.

  16. Optimization of lens shape for autostereoscopic display

    Science.gov (United States)

    Su, Ping; An, Shu; Ma, Jianshe

    2016-10-01

    The three-dimensional(3D) displays based on binocular parallax have drawn increasingly interests. The light splitting element, which presents separate images to the viewer's left and right eyes, plays an important part in the auto-stereoscopic display. Lenticular lenses are widely used as the light splitting elements. However, the crosstalk resulted from the unsatisfied splitting may reduce the 3D experience. It was determined that the most suitable cross sectional shape for lenticular lenses is elliptical. Firstly, the formula of the surface is derived based on the ellipse expression and the requirement of the 3D display system, that is y2+0.5651x2 - 303.4768=0. Secondly, one axial source and 4 off-axial sources placed at the heights of 2.5mm, 5mm, 7.5mm and 8mm are used to analyze the beam splitting quality of the cylindrical and elliptical lens element, respectively. The spot of elliptical lens is smaller which means a better beam splitting quality. Thirdly, Monte Carlo Non-Sequential Ray tracing algorithm is used to simulate the luminance distribution on the viewing plane, the narrower width of vertical stripes means that the aberration is suppressed. Finally, the shape of elliptical can reduce the processing difficulty with the 10μm minimum step width. In a word, the optimization of the surface has a significant effect on the improvement of stereoscopic depth and the reduction of ghost images.

  17. Thermal behavior in the LENS process

    Energy Technology Data Exchange (ETDEWEB)

    Griffith, M.L.; Schlienger, M.E.; Harwell, L.D. [and others

    1998-08-01

    Direct laser metal deposition processing is a promising manufacturing technology which could significantly impact the length of time between initial concept and finished part. For adoption of this technology in the manufacturing environment, further understanding is required to ensure robust components with appropriate properties are routinely fabricated. This requires a complete understanding of the thermal history during part fabrication and control of this behavior. This paper will describe research to understand the thermal behavior for the Laser Engineered Net Shaping (LENS) process, where a component is fabricated by focusing a laser beam onto a substrate to create a molten pool in which powder particles are simultaneously injected to build each layer. The substrate is moved beneath the laser beam to deposit a thin cross section, thereby creating the desired geometry for each layer. After deposition of each layer, the powder delivery nozzle and focusing lens assembly is incremented in the positive Z-direction, thereby building a three dimensional component layer additively. It is important to control the thermal behavior to reproducibly fabricate parts. The ultimate intent is to monitor the thermal signatures and to incorporate sensors and feedback algorithms to control part fabrication. With appropriate control, the geometric properties (accuracy, surface finish, low warpage) as well as the materials` properties (e.g., strength, ductility) of a component can be dialed into the part through the fabrication parameters. Thermal monitoring techniques will be described, and their particular benefits highlighted. Preliminary details in correlating thermal behavior with processing results will be discussed.

  18. Calcification of intraocular implant lens surfaces.

    Science.gov (United States)

    Wu, Wenju; Guan, Xiangying; Tang, Ruikang; Hook, Daniel; Yan, Wenyan; Grobe, George; Nancollas, George H

    2004-02-17

    Calcification of octacalcium phosphate [Ca8H2(PO4)6 x 5H2O, OCP] on differently packaged "Ultem" and "Surefold" intraocular implant lens surfaces has been studied in vitro in solutions supersaturated with respect to OCP at pH = 7.10 and 37 degrees C. No mineral deposition was observed on the lenses packaged in Ultem vials even after treatment with behenic acid, one of the fatty acids identified on explanted lenses. Following treatment with behenic acid, nucleation of OCP occurred on the lenses from Surefold vials, which incorporate silicone gaskets; induction periods preceding calcification were about 6 h. No mineralization was found on the lenses in vials with other gasket materials, including polytetrafluoroethylene, fluorocarbon elastomer, and polypropylene. The results of this study indicate that both silicone and fatty acids such as behenic acid play important roles in inducing the in vivo calcification of OCP on IOL lenses; all of the lens treatment steps were necessary for nucleation induction.

  19. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Willson, Reg G.; Goetz, Walter

    2012-09-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ˜5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ˜2.1 cm to infinity. At the minimum working distance, image pixel scale is ˜14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI's resolution is comparable at ˜30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  20. What Do Gravitational Lens Time Delays Measure?

    CERN Document Server

    Kochanek, C S

    2002-01-01

    Gravitational lens time delays depend on the Hubble constant, the observed image positions, and the surface mass density of the lens in the annulus between the images. Simple time delay lenses like PG1115+080, SBS1520+530, B1600+434, PKS1830-211 and HE2149-2745 have H0 = A(1-)+B(e-1) where the two coefficients A ~ 90km/s Mpc and B ~ 10km/s Mpc depend on the measured delays and the observed image positions, is the mean surface density in the annulus between the images, and there is a small correction from the logarithmic slope e ~ 2 of the surface density profile, k ~ R^(1-e), in the annulus. These 5 systems are very homogeneous, since for fixed H0=100h km/s Mpc they must have the same surface density, =1.11-1.22 h +/- 0.04, with an upper bound of 0.07 on any dispersion in beyond those due to the measurement errors. If the lenses have their expected dark halos, ~ 0.5 and H0=51+/-5 km/s Mpc, while if they have constant mass-to-light ratios, ~ 0.1-0.2 and H0=73+/-8 km/s Mpc. More complicated lenses with mult...

  1. Curiosity's Mars Hand Lens Imager (MAHLI) Investigation

    Science.gov (United States)

    Edgett, Kenneth S.; Yingst, R. Aileen; Ravine, Michael A.; Caplinger, Michael A.; Maki, Justin N.; Ghaemi, F. Tony; Schaffner, Jacob A.; Bell, James F.; Edwards, Laurence J.; Herkenhoff, Kenneth E.; Heydari, Ezat; Kah, Linda C.; Lemmon, Mark T.; Minitti, Michelle E.; Olson, Timothy S.; Parker, Timothy J.; Rowland, Scott K.; Schieber, Juergen; Sullivan, Robert J.; Sumner, Dawn Y.; Thomas, Peter C.; Jensen, Elsa H.; Simmonds, John J.; Sengstacken, Aaron J.; Wilson, Reg G.; Goetz, Walter

    2012-01-01

    The Mars Science Laboratory (MSL) Mars Hand Lens Imager (MAHLI) investigation will use a 2-megapixel color camera with a focusable macro lens aboard the rover, Curiosity, to investigate the stratigraphy and grain-scale texture, structure, mineralogy, and morphology of geologic materials in northwestern Gale crater. Of particular interest is the stratigraphic record of a ?5 km thick layered rock sequence exposed on the slopes of Aeolis Mons (also known as Mount Sharp). The instrument consists of three parts, a camera head mounted on the turret at the end of a robotic arm, an electronics and data storage assembly located inside the rover body, and a calibration target mounted on the robotic arm shoulder azimuth actuator housing. MAHLI can acquire in-focus images at working distances from ?2.1 cm to infinity. At the minimum working distance, image pixel scale is ?14 μm per pixel and very coarse silt grains can be resolved. At the working distance of the Mars Exploration Rover Microscopic Imager cameras aboard Spirit and Opportunity, MAHLI?s resolution is comparable at ?30 μm per pixel. Onboard capabilities include autofocus, auto-exposure, sub-framing, video imaging, Bayer pattern color interpolation, lossy and lossless compression, focus merging of up to 8 focus stack images, white light and longwave ultraviolet (365 nm) illumination of nearby subjects, and 8 gigabytes of non-volatile memory data storage.

  2. Crystal diffraction lens for medical imaging

    Science.gov (United States)

    Smither, Robert K.; Roa, Dante E.

    2000-04-01

    A crystal diffraction lens for focusing energetic gamma rays has been developed at Argonne National Laboratory for use in medical imaging of radioactivity in the human body. A common method for locating possible cancerous growths in the body is to inject radioactivity into the blood stream of the patient and then look for any concentration of radioactivity that could be associated with the fast growing cancer cells. Often there are borderline indications of possible cancers that could be due to statistical functions in the measured counting rates. In order to determine if these indications are false or real, one must resort to surgical means and take tissue samples in the suspect area. We are developing a system of crystal diffraction lenses that will be incorporated into a 3- D imaging system with better sensitivity (factors of 10 to 20) and better spatial resolution (a few mm in both vertical and horizontal directions) than most systems presently in use. The use of this new imaging system will allow one to eliminate 90 percent of the false indications and both locate and determine the size of the cancer with mm precision. The lens consists of 900 single crystals of copper, 4 mm X 4 mm on a side and 2 - 4 mm thick, mounted in 13 concentric rings.

  3. Cubic optical elements for an accommodative intraocular lens.

    Science.gov (United States)

    Simonov, Aleksey N; Vdovin, Gleb; Rombach, Michiel C

    2006-08-21

    We present a new accommodative intraocular lens based on a two-element varifocal Alvarez lens. The intraocular lens consists of (1) an anterior element combining a spherical lens for refractive power with a cubic surface for the varifocal effect, and (2) a posterior element with a cubic surface only. The focal length of the IOL lens changes when the superimposed refractive elements shift in opposite directions in a plane perpendicular to the optical axis. The ciliary muscle will drive the accommodation by a natural process of contraction and relaxation. Results of ray-tracing simulations of the model eye with the two-element intraocular lens are presented for on-axis and off-axis vision. The configuration of the lens is optimized to reduce refractive errors as well as effects of misalignment. A prototype with a clear aperture of ~5.7 mm is manufactured and evaluated in air with a Shack-Hartmann wave-front sensor. It provides an accommodation range of ~4 dioptres in the eye at a ~0.75-mm lateral displacement of the optical elements. The experimentally measured on-axis optical performance of the IOL lens agrees with the theoretically predicted performance.

  4. Scleral Lens Prescription and Management Practices: The SCOPE Study.

    Science.gov (United States)

    Harthan, Jennifer; Nau, Cherie B; Barr, Joseph; Nau, Amy; Shorter, Ellen; Chimato, Nicolette T; Hodge, David O; Schornack, Muriel M

    2017-04-06

    To assess current scleral lens prescription and management practices by conducting an international online survey of eye care providers. The SCOPE (Scleral Lenses in Current Ophthalmic Practice: an Evaluation) study group designed and administered an online survey regarding current scleral lens prescription and management practices. The survey was open from January 15 to March 31, 2015, and generated 723 responses from individuals who had fit at least 5 patients with scleral lenses. Respondents (n=663) prescribed scleral lenses that ranged from 15 to 17 mm in diameter (65%), smaller than 15 mm (18%), and larger than 18 mm (17%). More than 50 lens designs were identified. Average daily wearing time of 11.8 hr was consistent across 651 respondents, and 475/651 (73%) recommended midday removal on some, most, or all days. Most respondents recommended nonpreserved saline to fill the bowl of the lens before application (single-use vials, 392/653 [60%]; bottled products, 372/653 [57%]). A hydrogen peroxide-based disinfection system was the most commonly recommended care product (397/651 [61%]). A reasonable degree of consensus exists regarding some aspects of scleral lens prescription and management (average lens diameter, daily wearing time, and use of nonpreserved products for lens application). Further study is needed to develop evidence-based guidelines for scleral lens prescription and management.

  5. Secondary implantation of a double intraocular lens after penetrating keratoplasty.

    Science.gov (United States)

    Gayton, J L

    1998-02-01

    Penetrating keratoplasty (PKP) patients often have severe, visually disabling refractive errors. Astigmatism can be addressed by refractive surgery; however, correcting hyperopia is more problematic. Although pseudophakic PKP patients can have a lens exchange, it can be traumatic in this population. In this pseudophakic PKP patient, I added a second posterior chamber intraocular lens, correcting the hyperopia and resolving visual complaints.

  6. Contact lens wear and dry eyes: challenges and solutions

    Directory of Open Access Journals (Sweden)

    Markoulli M

    2017-02-01

    Full Text Available Maria Markoulli, Sailesh Kolanu School of Optometry and Vision Science, University of New South Wales, Sydney, NSW, Australia Abstract: The number of contact lens wearers worldwide has remained relatively stable over the past decade, despite the investment that has gone into contact lens technology. This is largely because 10%–50% of wearers dropout of contact lens wear within 3 years of commencement; the most common reason cited being contact lens discomfort (CLD. Of the symptoms reported, sensation of dry eye is the most common. Given the outcome of reduced wearing time, increased chair time, and ultimate contact lens discontinuation, the challenge is to identify the warning signs of CLD early on. Clinically detectable changes such as conjunctival staining, conjunctival indentation, conjunctival epithelial flap formation, lid wiper epitheliopathy, Demodex blepharitis, and meibomian gland dysfunction have been linked to CLD, highlighting the need to perform regular aftercare visits to identify these changes. At a cellular level, conjunctival metaplasia and reduced goblet cell density have been linked to CLD, leading to a downstream effect on the tear film breakup time of contact lens wearers. These factors suggest a strong link between CLD and friction, raising the need to target this as a means of minimizing CLD. The purpose of this review is to identify the clinical signs that relate to CLD as a means of earlier detection and management in order to combat contact lens dropout. Keywords: contact lens discomfort, dry eye disease, lid wiper epitheliopathy, tear film biomarkers, meibomian gland dysfunction

  7. Incidence of contact lens-associated microbial keratitis

    NARCIS (Netherlands)

    Cheng, K.H.; Leung, S.L.; Hoekman, J.W.; Beekhuis, W.H.; Mulder, P.G.H.; Geerards, A.J.M.; Kijlstra, A.

    1999-01-01

    Background. The incidence of contact-lens-associated microbial keratitis is uncertain and its related morbidity in the general population of contact-lens wearers is not known. We examined these issues in a prospective epidemiological study. Methods. We surveyed all practising ophthalmologists in the

  8. Why are there so many system shapes in lens design?

    NARCIS (Netherlands)

    Bociort, F.

    2010-01-01

    The presence of many local minima in the merit function landscape is perhaps the most difficult challenge in lens design. We present a simplified mathematical model that illustrates why the number of local minima increases rapidly with each additional lens added to the imaging system. Comparisons wi

  9. The analysis of optical wave beams propagation in lens systems

    Science.gov (United States)

    Kazakov, I.; Mosentsov, S.; Moskaletz, O.

    2016-08-01

    In this paper some aspects of the formation and propagation of optical wave beams in lens systems were considered. As an example, the two-lens optical information processing system was considered. Analysis of the two-lens optical circuit has been made with a systems approach perspective. As part of the radio-optical analogies had been applied certain provisions of the theory of dynamical systems to the spatial optical system. The lens system is represented as a simple series-connected optical elements with known spatial impulse response. General impulse response of such a system has been received, as well as consider some special cases of the impulse response. The question of the relationship between the parameters and the size of the input aperture lenses for undistorted transmission of the optical signal has been considered. Analysis of the energy loss resulting from the finite aperture of the lens. It's based on an assessment of the fraction of radiation that propagates beyond the lens. Analysis showed that the energy losses depend explicitly on the following parameters: radiation wavelength, distance between input aperture and lens, and ratio of the input aperture and lens aperture. With the computer help simulation the dependence of losses was shown on the above parameters

  10. Isofocusing and immunological investigations on cephalopod lens proteins

    NARCIS (Netherlands)

    Brahma, S.K.; Lancieri, M.

    1979-01-01

    Soluble lens proteins from Octopus vulgaris, Sepia officinalis, and Loligo vulgaris were analyzed by thin-layer isoelectric focusing and compared by various immunochemical methods using antibodies directed against total soluble lens protein antigens from the said three species. The results show clos

  11. Study of the soluble lens proteins from different amphibian species

    NARCIS (Netherlands)

    Brahma, S.K.; Doorenmaalen, W.J. van

    1969-01-01

    Soluble lens proteins from five species of amphibia have been studied by zone electrophoresis and other immunochemical methods. Their patterns, as revealed by electrophoresis, do not differ markedly though the numbers of bands and subunits vary. The γ-crystallin appears to be the predominant lens pr

  12. Computational fluid dynamics model of the spinning pipe gas lens

    CSIR Research Space (South Africa)

    Mafusire, C

    2010-08-01

    Full Text Available When a metal horizontal pipe is heated and spun along its axis, a graded refractive index distribution is generated which is can be used as a lens, thus its name, the spinning pipe gas lens (SPGL). Previous experimental results of its performance...

  13. An adjustable electron achromat for cathode lens microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tromp, R.M., E-mail: rtromp@us.ibm.com [IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY 10598 (United States); Leiden Institute of Physics, Kamerlingh Onnes Laboratory, Niels Bohrweg 2, 2333 CA Leiden (Netherlands)

    2015-12-15

    Chromatic aberration correction in light optics began with the invention of a two-color-corrected achromatic crown/flint lens doublet by Chester Moore Hall in 1730. Such color correction is necessary because any single glass shows dispersion (i.e. its index of refraction changes with wavelength), which can be counteracted by combining different glasses with different dispersions. In cathode lens microscopes (such as Photo Electron Emission Microscopy – PEEM) we encounter a similar situation, where the chromatic aberration coefficient of the cathode lens shows strong dispersion, i.e. depends (non-linearly) on the energy with which the electrons leave the sample. Here I show how a cathode lens in combination with an electron mirror can be configured as an adjustable electron achromat. The lens/mirror combination can be corrected at two electron energies by balancing the settings of the electron mirror against the settings of the cathode lens. The achromat can be adjusted to deliver optimum performance, depending on the requirements of a specific experiment. Going beyond the achromat, an apochromat would improve resolution and transmission by a very significant margin. I discuss the requirements and outlook for such a system, which for now remains a wish waiting for fulfilment. - Highlights: • The properties of cathode objective lens plus electron mirror are discussed. • In analogy with light-optical achromats, cathode lens plus mirror can be configured as an electron achromat. • Unlike light optics, the electron achromat can be adjusted to best fulfill experimental requirements.

  14. Optical aberrations in a spinning pipe gas lens

    CSIR Research Space (South Africa)

    Mafusire, C

    2008-06-01

    Full Text Available If a heated pipe is rotated about its axis, a density gradient is formed which results in the pipe acting as a graded index lens. In this study the authors revisit the concept of a spinning pipe gas lens and for the first time analyse both the wave...

  15. The binary gravitational lens and its extreme cases

    NARCIS (Netherlands)

    Dominik, M

    1999-01-01

    The transition of the binary gravitational lens from the equal mass case to small (planetary) mass ratios q is studied. It is shown how the Limit of a (pure shear) Chang-Refsdal lens is approached, under what conditions the Chang-Refsdal approximation is valid, and how the 3 different topologies of

  16. The NNEST lens non native english speakers in TESOL

    CERN Document Server

    Mahboob, Ahmar

    2010-01-01

    The NNEST Lens invites you to imagine how the field of TESOL and applied linguistics can develop if we use the multilingual, multicultural, and multinational perspectives of an NNEST lens to re-examine our assumptions, practices, and theories in the field

  17. Scleral lens tolerance after corneal cross-linking for keratoconus

    NARCIS (Netherlands)

    Visser, Esther Simone; Soeters, Nienke; Tahzib, Nayyirih G.

    2015-01-01

    Purpose. Subjective and objective evaluation of scleral lens tolerance and fitting before and after corneal cross-linking (CXL) for progressive keratoconus. Methods. In this prospective cohort, evaluations were made of 18 unilateral eyes in patients who underwent CXL and had been wearing scleral len

  18. Terahertz wave tomographic imaging with a Fresnel lens

    Institute of Scientific and Technical Information of China (English)

    S. Wang; X.-C. Zhang

    2003-01-01

    We demonstrate three-dimensional tomographic imaging using a Fresnel lens with broadband terahertz pulses. Objects at various locations along the beam propagation path are uniquely imaged on the same imaging plane using a Fresnel lens with different frequencies of the imaging beam. This procedure allows the reconstruction of an object's tomographic contrast image by assembling the frequency-dependent images.

  19. Opaque Contact Lens For Tracking Motion Of Eye

    Science.gov (United States)

    Zografos, James L., II; Gibson, Charles R.

    1993-01-01

    Opaque contact lens facilitates measurements of movements of eye; particularly, torsional movements. Lens, marked with pair of indices at diameter of 0.5 mm, provides stable, high-contrast reference for measurements of angular position and velocity of eye by use of video-image-analysis techniques. Intended for use in experiments on response of eye to vestibular balance mechanism.

  20. Achromatic Fresnel Lens with Improved Efficiency for PV Systems

    Directory of Open Access Journals (Sweden)

    Mario González Montes

    2014-01-01

    Full Text Available This work is aimed to design and evaluate different achromatic Fresnel lens solutions capable of operating as concentrators aimed at photovoltaic cells systems. Throughout this study, the theoretical parametric design of the achromatic lens will be shown together with a series of simulations to verify the performance of each lens topology. The results will be compared with a standard Fresnel lens to ascertain the validity and effectiveness of the obtained design. Finally, a novel kind of hybrid lens is proposed, which combines the advantages of each type of lens (standard and Fresnel according to the optimal operating region of each design. Efficiency and concentration ratios of each particular lens are shown, regarding lens dimension, light’s incidence angle, or wavelength. Through this innovative achromatic design concentration ratios above 1000 suns, which hardly reach standard Fresnel lenses. Furthermore chromatic dispersion is minimized and the efficiency rate is over 85% of efficiency for a wide spectral range (from 350 nm to 1100 nm.

  1. A Broadband Metasurface-Based Terahertz Flat-Lens Array

    KAUST Repository

    Wang, Qiu

    2015-02-12

    A metasurface-based terahertz flat-lens array is proposed, comprising C-shaped split-ring resonators exhibiting locally engineerable phase discontinuities. Possessing a high numerical aperture, the planar lens array is flexible, robust, and shows excellent focusing characteristics in a broadband terahertz frequency. It could be an important step towards the development of planar terahertz focusing devices for practical applications.

  2. Image registration reveals central lens thickness minimally increases during accommodation

    Directory of Open Access Journals (Sweden)

    Schachar RA

    2017-09-01

    Full Text Available Ronald A Schachar,1 Majid Mani,2 Ira H Schachar31Department of Physics, University of Texas at Arlington, Arlington, TX, 2California Retina Associates, El Centro, 3Byers Eye Institute of Stanford University, Palo Alto, CA, USAPurpose: To evaluate anterior chamber depth, central crystalline lens thickness and lens curvature during accommodation.Setting: California Retina Associates, El Centro, CA, USA.Design: Healthy volunteer, prospective, clinical research swept-source optical coherence biometric image registration study of accommodation.Methods: Ten subjects (4 females and 6 males with an average age of 22.5 years (range: 20–26 years participated in the study. A 45° beam splitter attached to a Zeiss IOLMaster 700 (Carl Zeiss Meditec Inc., Jena, Germany biometer enabled simultaneous imaging of the cornea, anterior chamber, entire central crystalline lens and fovea in the dilated right eyes of subjects before, and during focus on a target 11 cm from the cornea. Images with superimposable foveal images, obtained before and during accommodation, that met all of the predetermined alignment criteria were selected for comparison. This registration requirement assured that changes in anterior chamber depth and central lens thickness could be accurately and reliably measured. The lens radii of curvatures were measured with a pixel stick circle.Results: Images from only 3 of 10 subjects met the predetermined criteria for registration. Mean anterior chamber depth decreased, −67 µm (range: −0.40 to −110 µm, and mean central lens thickness increased, 117 µm (range: 100–130 µm. The lens surfaces steepened, anterior greater than posterior, while the lens, itself, did not move or shift its position as appeared from the lack of movement of the lens nucleus, during 7.8 diopters of accommodation, (range: 6.6–9.7 diopters.Conclusion: Image registration, with stable invariant references for image correspondence, reveals that during accommodation a

  3. Actively tunable plasmonic lens for subwavelength imaging at different wavelengths

    CERN Document Server

    Zeng, Beibei; Luo, Xiangang

    2011-01-01

    A type of tunable plasmonic lens with nanoslits is proposed for subwavelength imaging in the far field at different wavelengths. The nanoslits array in the plasmonic lens, which have constant depths but varying widths, could generate desired optical phase retardations based on the particular propagation property of the Surface Plasmon Polaritons (SPPs) in the metal-dielectric-metal (MDM) slit waveguides. We theoretically and numerically demonstrate the tunability of a single plasmonic lens for subwavelength imaging (full width at half maximum, 0.37 ~0.47) by adjusting the surrounding dielectric fluid, thereby realizing the compact in-plane tunable plasmonic lens. This work provides a novel approach for developing integrative tunable plasmonic lens for a variety of lab-on-chip applications.

  4. Preliminary of Optical Lens Design for Micro-Satellite

    Science.gov (United States)

    Rachim, Elvira; Mukhtar Tahir, Andi; Herawan, Agus

    2017-01-01

    The development of micro satellites for the last two decades is emerging rapidly as the need of satellite communication usage is increasing. Earth observation is one of the example of how satellites are on demand. Most observation satellites consist of sensors and imaging system on-board. One of the key element to have a good imaging system is a special optical lens system design. Such lens is designed specifically by calculating every parameter such as refractive, reflective indexes, type of surface, distance and many more. Manufactured lenses sometimes do not match the requirement of an imager system hence the special lens design is needed. This paper will first briefly describe the history of optic, theory related to lens system, then the design and the analysis of lens system for micro-satellites generally and LAPAN A4 particularly.

  5. Patient acceptability of the Tecnis® multifocal intraocular lens

    Directory of Open Access Journals (Sweden)

    Sood P

    2011-03-01

    Full Text Available Priyanka Sood1, Maria A Woodward21Emory Eye Center, Atlanta, GA, USA; 2Kellogg Eye Center, Ann Arbor, MI, USAAbstract: Cataract surgery has evolved. The goal of the surgeon includes both restoration of vision and refinement of vision. Patients' desire for spectacle independence has driven the market for presbyopia-correcting cataract surgery and development of novel intraocular lens (IOL designs. The Tecnis® Multifocal Intraocular Lens incorporates an aspheric, modified anterior prolate IOL with a diffractive multifocal lens design. The design aims to minimize spherical aberration and improve range of focus. The purpose of this review is to assess patient acceptability of the Tecnis® multifocal intraocular lens.Keywords: Tecnis®, intraocular lens, multifocal, presbyopia 

  6. Dielectric Optical-Controlled Magnifying Lens by Nonlinear Negative Refraction

    CERN Document Server

    Cao, Jianjun; Zheng, Yuanlin; Chen, Xianfeng; Liang, Xiaogan; Wan, Wenjie

    2014-01-01

    A simple optical lens plays an important role for exploring the microscopic world in science and technology by refracting light with tailored spatially varying refractive index. Recent advancements in nanotechnology enable novel lenses, such as, superlens, hyperlens, Luneburg lens, with sub-wavelength resolution capabilities by specially designing materials' refractive indices with meta-materials and transformation optics. However, these artificially nano/micro engineered lenses usually suffer high losses from metals and are highly demanding in fabrication. Here we experimentally demonstrate for the first time a nonlinear dielectric magnifying lens using negative refraction by degenerate four-wave mixing in a plano-concave glass slide, obtaining magnified images. Moreover, we transform a nonlinear flat lens into a magnifying lens by introducing transformation optics into nonlinear regime, achieving an all-optical controllable lensing effect through nonlinear wave mixing, which may have many potential applicat...

  7. The conformity of a soft contact lens on the eye.

    Science.gov (United States)

    Funkenbusch, G M; Benson, R C

    1996-08-01

    An axisymmetric elastic shell deformation model has been created to predict the conformity of a soft contact lens when pressed against the eye. Regions of contact and gap may be predicted, and the nonuniform reaction pressure between the lens and eye may also be found. This is important for issues like abrasion and comfort. Bending, membrane and transverse shear loads within the lens are also computed. Commercial soft contact lenses and a representative eye shape are used for the examples. We find that the uniformity of loading against the eye is strongly affected by the degree to which the lens is shaped to fit the eye, and relatively unaffected by the thickness of the lens.

  8. J0316+4328: a Probable "Asymmetric Double" Lens

    CERN Document Server

    Boyce, E R; Browne, I W A; Stroman, W J; Jackson, N J

    2007-01-01

    We report a probable gravitational lens J0316+4328, one of 19 candidate asymmetric double lenses (2 images at a high flux density ratio) from CLASS. Observations with the Very Large Array (VLA), MERLIN and the Very Long Baseline Array (VLBA) imply that J0316+4328 is a lens with high confidence. It has 2 images separated by 0.40", with 6 GHz flux densities of 62 mJy and 3.2 mJy. The flux density ratio of ~19 (constant over the frequency range 6-22 GHz) is the largest for any 2 image gravitational lens. High resolution optical imaging and deeper VLBI maps should confirm the lensing interpretation and provide inputs to detailed lens models. The unique configuration will give strong constraints on the lens galaxy's mass profile.

  9. Optofluidic lens actuated by laser-induced solutocapillary forces

    Science.gov (United States)

    Malyuk, A. Yu.; Ivanova, N. A.

    2017-06-01

    We demonstrate an adaptive liquid lens controlled by laser-induced solutocapillary forces. The liquid droplet serving as a lens is formed in a thin layer of binary liquid mixture by surface tension driven flows caused by the thermal action of laser irradiation. The shape of droplet, its aperture and the focal length are reversibly changed without hysteresis by varying the intensity of the laser beam. The focal length variation range of the droplet-lens lies in between infinity (a flat layer) to 15 mm (a curved interface). The droplet-lens is capable to adjust the in-plane lateral position in response to a displacement of the laser beam. The proposed laser controlled droplet-lens will enable to develop smart liquid optical devices, which can imitate the accommodation reflex and pupillary light reflex of the eye.

  10. Cataract Surgery for Tilted Lens in Peters' Anomaly Type 2

    Directory of Open Access Journals (Sweden)

    Tadayuki Nishide

    2013-09-01

    Full Text Available Background: Cases of cataract surgery without penetrating keratoplasty in patients with Peters' anomaly are very rare. We report a case of Peters' anomaly type 2 with tilted lens due to synechia between the lens and iris that was treated with cataract surgery without penetrating keratoplasty. Case Presentation: A 16-year-old girl had Peters' anomaly in both eyes. Corneal opacity was severe in the left eye due to high-grade dysgenesis of the anterior segment. In the right eye, corneal opacity had spread from the center of the cornea to the inferotemporal side, and there was synechia between the iris and corneal endothelium from the inferonasal side to the inferotemporal side. Opacity was observed in the anterior pole of the lens, and there was synechia between the anterior iris and the lens. Ultrasound biomicroscopy (UBM revealed that the lens was tilted because of synechia. The tilted lens induced astigmatism, which reduced visual acuity to 20/250, in conjunction with a cataract. Cataract surgery was performed; the synechia between the lens capsule and the iris was severed, an intraocular lens was inserted, and the tilt was repaired. UBM was used postoperatively to confirm that the lens capsule synechia had been corrected and that the intraocular lens was not tilted. As a result, visual acuity improved to 20/100; glaucoma and expansion of corneal opacity were not observed. Conclusions: Severing of the synechia between the cataract and iris, during cataract surgery, in a patient with Peters' anomaly type 2 resulted in favorable postoperative visual acuity.

  11. Force analysis of bacterial transmission from contact lens cases to corneas, with the contact lens as the intermediary

    NARCIS (Netherlands)

    Qu, Wen-wen; Hooymans, Johanna MM; de Vries, Jacob; van der Mei, Henderina; Busscher, Hendrik

    2011-01-01

    PURPOSE. To determine the probability of transmission of a Staphylococcus aureus strain from a contact lens case, to the contact lens (CL) surfaces, to the cornea, on the basis of bacterial adhesion forces measured by using atomic force microscopy (AFM). METHODS. Adhesion forces between S. aureus st

  12. The sloan lens acs survey. II. Stellar populations and internal structure of early-type lens galaxies

    NARCIS (Netherlands)

    Treu, Tommaso; Koopmans, Léon V.; Bolton, Adam S.; Burles, Scott; Moustakas, Leonidas A.

    2006-01-01

    We use HST images to derive effective radii and effective surface brightnesses of 15 early-type (E+S0) lens galaxies identified by the SLACS Survey. Our measurements are combined with stellar velocity dispersions from the SDSS database to investigate for the first time the distribution of lens galax

  13. The Sloan Lens ACS Survey. I. A large spectroscopically selected sample of massive early-type lens galaxies

    NARCIS (Netherlands)

    Bolton, AS; Burles, S; Koopmans, LVE; Treu, T; Moustakas, LA

    2006-01-01

    The Sloan Lens ACS (SLACS) Survey is an efficient Hubble Space Telescope (HST) Snapshot imaging survey for new galaxy-scale strong gravitational lenses. The targeted lens candidates are selected spectroscopically from the Sloan Digital Sky Survey (SDSS) database of galaxy spectra for having multiple

  14. Bacterial transmission from lens storage cases to contact lenses - Effects of lens care solutions and silver impregnation of cases

    NARCIS (Netherlands)

    Vermeltfoort, Pit B. J.; Hooymans, Johanna M. M.; Busscher, Henk J.; van der Mei, Henny C.

    2008-01-01

    The killing efficacies of multipurpose lens care solutions on planktonic and biofilm bacteria grown in polypropylene contact lens storage cases with and without silver impregnation and effects on bacterial transmission from storage cases to silicone hydrogel contact lenses were investigated. For tra

  15. The Sloan Lens ACS Survey. I. A large spectroscopically selected sample of massive early-type lens galaxies

    NARCIS (Netherlands)

    Bolton, AS; Burles, S; Koopmans, LVE; Treu, T; Moustakas, LA

    2006-01-01

    The Sloan Lens ACS (SLACS) Survey is an efficient Hubble Space Telescope (HST) Snapshot imaging survey for new galaxy-scale strong gravitational lenses. The targeted lens candidates are selected spectroscopically from the Sloan Digital Sky Survey (SDSS) database of galaxy spectra for having multiple

  16. Design and analysis of an adaptive lens that mimics the performance of the crystalline lens in the human eye

    Science.gov (United States)

    Santiago-Alvarado, Agustin; Cruz-Félix, Angel S.; Iturbide-Jiménez, F.; Martínez-López, M.; Ramírez-Como, M.; Armengol-Cruz, V.; Vásquez-Báez, I.

    2014-09-01

    Tunable lenses are optical systems that have attracted much attention due to their potential applications in such areas like ophthalmology, machine vision, microscopy and laser processing. In recent years we have been working in the analysis and performance of a liquid-filled variable focal length lens, this is a lens that can modify its focal length by changing the amount of water within it. Nowadays we extend our study to a particular adaptive lens known as solid elastic lens (SEL) that it is formed by an elastic main body made of Polydimethylsiloxane (PDMS Sylgard 184). In this work, we present the design, simulation and analysis of an adaptive solid elastic lens that in principle imitates the accommodation process of the crystalline lens in the human eye. For this work, we have adopted the parameters of the schematic eye model developed in 1985 by Navarro et al.; this model represents the anatomy of the eye as close as possible to reality by predicting an acceptable and accurate quantity of spherical and chromatic aberrations without any shape fitting. An opto-mechanical analysis of the accommodation process of the adaptive lens is presented, by simulating a certain amount of radial force applied onto the SEL using the finite element method with the commercial software SolidWorks®. We also present ray-trace diagrams of the simulated compression process of the adaptive lens using the commercial software OSLO®.

  17. Cosmic Lens Reveals Distant Galactic Violence

    Science.gov (United States)

    2008-10-01

    By cleverly unraveling the workings of a natural cosmic lens, astronomers have gained a rare glimpse of the violent assembly of a young galaxy in the early Universe. Their new picture suggests that the galaxy has collided with another, feeding a supermassive black hole and triggering a tremendous burst of star formation. Gravitational Lens Diagram Imaging a Distant Galaxy Using a Gravitational Lens CREDIT: Bill Saxton, NRAO/AUI/NSF Click on image for details and more graphics. The astronomers used the National Science Foundation's Very Large Array (VLA) radio telescope to look at a galaxy more than 12 billion light-years from Earth, seen as it was when the Universe was only about 15 percent of its current age. Between this galaxy and Earth lies another distant galaxy, so perfectly aligned along the line of sight that its gravity bends the light and radio waves from the farther object into a circle, or "Einstein Ring." This gravitational lens made it possible for the scientists to learn details of the young, distant galaxy that would have been unobtainable otherwise. "Nature provided us with a magnifying glass to peer into the workings of a nascent galaxy, providing an exciting look at the violent, messy process of building galaxies in the early history of the Universe," said Dominik Riechers, who led this project at the Max Planck Institute for Astronomy in Germany and now is a Hubble Fellow at the California Institute of Technology (Caltech). The new picture of the distant galaxy, dubbed PSS J2322+1944, shows a massive reservoir of gas, 16,000 light-years in diameter, that contains the raw material for building new stars. A supermassive black hole is voraciously eating material, and new stars are being born at the rate of nearly 700 Suns per year. By comparison, our Milky Way Galaxy produces the equivalent of about 3-4 Suns per year. The black hole appears to be near the edge, rather than at the center, of the giant gas reservoir, indicating, the astronomers say

  18. Plasma waves

    CERN Document Server

    Swanson, DG

    1989-01-01

    Plasma Waves discusses the basic development and equations for the many aspects of plasma waves. The book is organized into two major parts, examining both linear and nonlinear plasma waves in the eight chapters it encompasses. After briefly discussing the properties and applications of plasma wave, the book goes on examining the wave types in a cold, magnetized plasma and the general forms of the dispersion relation that characterize the waves and label the various types of solutions. Chapters 3 and 4 analyze the acoustic phenomena through the fluid model of plasma and the kinetic effects. Th

  19. Plasma astrophysics

    CERN Document Server

    Kaplan, S A; ter Haar, D

    2013-01-01

    Plasma Astrophysics is a translation from the Russian language; the topics discussed are based on lectures given by V.N. Tsytovich at several universities. The book describes the physics of the various phenomena and their mathematical formulation connected with plasma astrophysics. This book also explains the theory of the interaction of fast particles plasma, their radiation activities, as well as the plasma behavior when exposed to a very strong magnetic field. The text describes the nature of collective plasma processes and of plasma turbulence. One author explains the method of elementary

  20. TU-E-201-03: Eye Lens Dosimetry in Radiotherapy Using Contact Lens-Shaped Applicator

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. [Seoul National University Hospital (Korea, Republic of)

    2015-06-15

    Madan M. Rehani, Massachusetts General Hospital and Harvard Medical School, Boston Methods for Eye Lens Dosimetry and Studies On Lens Opacities with Interventionalists Radiation induced cataract is a major threat among staff working in interventional suites. Nearly 16 million interventional procedures are performed annually in USA. Recent studies by the principal investigator’s group, primarily among interventional cardiologists, on behalf of the International Atomic Energy Agency, show posterior subcapsular (PSC) changes in the eye lens in 38–53% of main operators and 21–45% of support staff. These changes have potential to lead to cataract in future years, as per information from A-Bomb survivors. The International Commission on Radiological Protection has reduced dose limit for staff by a factor of 7.5 (from 150 mSv/y to 20 mSv/y). With increasing emphasis on radiation induced cataracts and reduction in threshold dose for eye lens, there is a need to implement strategies for estimating eye lens dose. Unfortunately eye lens dosimetry is at infancy when it comes to routine application. Various approaches are being tried namely direct measurement using active or passive dosimeters kept close to eyes, retrospective estimations and lastly correlating patient dose in interventional procedures with staff eye dose. The talk will review all approaches available and ongoing active research in this area, as well as data from surveys done in Europe on status of eye dose monitoring in interventional radiology and nuclear medicine. The talk will provide update on how good is Hp(10) against Hp(3), estimations from CTDI values, Monte Carlo based simulations and current status of eye lens dosimetry in USA and Europe. The cataract risk among patients is in CT examinations of the head. Since radiation induced cataract predominantly occurs in posterior sub-capsular (PSC) region and is thus distinguishable from age or drug related cataracts and is also preventable, actions on

  1. TU-E-201-01: Methods for Eye Lens Dosimetry and Studies On Lens Opacities with Interventionists

    Energy Technology Data Exchange (ETDEWEB)

    Rehani, M. [Massachusetts General Hospital (United States)

    2015-06-15

    Madan M. Rehani, Massachusetts General Hospital and Harvard Medical School, Boston Methods for Eye Lens Dosimetry and Studies On Lens Opacities with Interventionalists Radiation induced cataract is a major threat among staff working in interventional suites. Nearly 16 million interventional procedures are performed annually in USA. Recent studies by the principal investigator’s group, primarily among interventional cardiologists, on behalf of the International Atomic Energy Agency, show posterior subcapsular (PSC) changes in the eye lens in 38–53% of main operators and 21–45% of support staff. These changes have potential to lead to cataract in future years, as per information from A-Bomb survivors. The International Commission on Radiological Protection has reduced dose limit for staff by a factor of 7.5 (from 150 mSv/y to 20 mSv/y). With increasing emphasis on radiation induced cataracts and reduction in threshold dose for eye lens, there is a need to implement strategies for estimating eye lens dose. Unfortunately eye lens dosimetry is at infancy when it comes to routine application. Various approaches are being tried namely direct measurement using active or passive dosimeters kept close to eyes, retrospective estimations and lastly correlating patient dose in interventional procedures with staff eye dose. The talk will review all approaches available and ongoing active research in this area, as well as data from surveys done in Europe on status of eye dose monitoring in interventional radiology and nuclear medicine. The talk will provide update on how good is Hp(10) against Hp(3), estimations from CTDI values, Monte Carlo based simulations and current status of eye lens dosimetry in USA and Europe. The cataract risk among patients is in CT examinations of the head. Since radiation induced cataract predominantly occurs in posterior sub-capsular (PSC) region and is thus distinguishable from age or drug related cataracts and is also preventable, actions on

  2. Time lens assisted photonic sampling extraction

    Science.gov (United States)

    Petrillo, Keith Gordon

    Telecommunication bandwidth demands have dramatically increased in recent years due to Internet based services like cloud computing and storage, large file sharing, and video streaming. Additionally, sensing systems such as wideband radar, magnetic imaging resonance systems, and complex modulation formats to handle large data transfer in telecommunications require high speed, high resolution analog-to-digital converters (ADCs) to interpret the data. Accurately processing and acquiring the information at next generation data rates from these systems has become challenging for electronic systems. The largest contributors to the electronic bottleneck are bandwidth and timing jitter which limit speed and reduce accuracy. Optical systems have shown to have at least three orders of magnitude increase in bandwidth capabilities and state of the art mode locked lasers have reduced timing jitters into thousands of attoseconds. Such features have encouraged processing signals without the use of electronics or using photonics to assist electronics. All optical signal processing has allowed the processing of telecommunication line rates up to 1.28 Tb/s and high resolution analog-to-digital converters in the 10s of gigahertz. The major drawback to these optical systems is the high cost of the components. The application of all optical processing techniques such as a time lens and chirped processing can greatly reduce bandwidth and cost requirements of optical serial to parallel converters and push photonically assisted ADCs into the 100s of gigahertz. In this dissertation, the building blocks to a high speed photonically assisted ADC are demonstrated, each providing benefits to its own respective application. A serial to parallel converter using a continuously operating time lens as an optical Fourier processor is demonstrated to fully convert a 160-Gb/s optical time division multiplexed signal to 16 10-Gb/s channels with error free operation. Using chirped processing, an

  3. Staging of laser-plasma accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Steinke, S., E-mail: ssteinke@lbl.gov; Tilborg, J. van; Benedetti, C.; Geddes, C. G. R.; Gonsalves, A. J.; Nakamura, K.; Schroeder, C. B.; Esarey, E. [Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Daniels, J. [Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Eindhoven University of Technology, PO Box 513, 5600MB Eindhoven (Netherlands); Swanson, K. K.; Shaw, B. H.; Leemans, W. P. [Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); University of California, Berkeley, California 94720 (United States)

    2016-05-15

    We present results of an experiment where two laser-plasma-accelerator stages are coupled at a short distance by a plasma mirror. Stable electron beams from the first stage were used to longitudinally probe the dark-current-free, quasi-linear wakefield excited by the laser of the second stage. Changing the arrival time of the electron beam with respect to the second stage laser pulse allowed reconstruction of the temporal wakefield structure, determination of the plasma density, and inference of the length of the electron beam. The first stage electron beam could be focused by an active plasma lens to a spot size smaller than the transverse wake size at the entrance of the second stage. This permitted electron beam trapping, verified by a 100 MeV energy gain.

  4. Perubahan Sosial Berbasis Tasawuf: Studi Kasus Fethullah Gülen Dan Gülen Movement

    Directory of Open Access Journals (Sweden)

    Sulaiman Sulaiman

    2016-06-01

    Full Text Available Abstract: This article aims at analyzing Fethullah Gülen and the Gülen Movement which have succeeded in performing social change based on the teaching of Sufism. He did Sufism creativity in order that Sufism teaching was able to respond the changes that occur in the modernlife. He believed that, only by reinterpretation and contextualization of Sufism, the spiritual dimension of Islam would be able to perform the transformation or social change among the Muslims. Therefore, by using Max Weber’s theory of social action, this paper will analyze three key teachings of Sufism of Gülen: ascetic (zuhd, inbisat (expansion, and hizmet. Based on the Weber's theory, Gülen occupied a very central and authoritative position: agent/actor, action and meaning. As a source of meaning and interpreter of meaning, the key concepts of Sufism were transformed by Gülen to the internal and external communities so that they had made a move to do social movements and humanity. For the followers of Gülen, the movement was called the Gülen Movement or the Hizmet Movement which was engaged in the fields of education, health care, humanitarian assistance, and the mass media. All forms of movement were entirely based on the spiritual values of Islam that had been formulated by Gülen. الملخص: يهدف هذا البحث إلى تحليل شخصية فتح الله غولن وحركته الذي تمكن من القيام بالتغيير الاجتماعي على أساس التعاليم الصوفية. إن فتح الله غولن قام بإحياء التصوف في صورته الجدّية والحيوية في حياة الإنسان المعاصر. ويعتقد أن إعادة التفسير لتعاليم التصوف مع مراعاة الواقع قادرة على التغيير الاجتماعي بين المسلمين. من أجل ذلك، أن استخدام نظرية ويبر، يمكن تحليل تعاليم التصوف الثلاثة

  5. Adding a lens Improves spinning speed characterization.

    Science.gov (United States)

    Mihaliuk, Eugene; Gullion, Terry

    2015-11-01

    Highly stable sample rotation is important in many solid-state NMR experiments. Whether the necessary stability is achieved is not always clear. Typically only an average frequency over some time interval (often relatively long and unknown) is available from the spinning speed controller readout, which is not representative of the short-term variations of instantaneous rotation frequency. The necessity of the relatively slow measurement of spinning speed is a consequence of phase noise in the tachometer, which prevents speed measurement to be both rapid and precise at the same time. We show that adding a lens to the tachometer, without any other changes in the probe, reduces phase noise by nearly an order of magnitude and allows improved measurement of the spinning speed.

  6. Achromatic Metasurface Lens at Telecommunication Wavelengths.

    Science.gov (United States)

    Khorasaninejad, Mohammadreza; Aieta, Francesco; Kanhaiya, Pritpal; Kats, Mikhail A; Genevet, Patrice; Rousso, David; Capasso, Federico

    2015-08-12

    Nanoscale optical resonators enable a new class of flat optical components called metasurfaces. This approach has been used to demonstrate functionalities such as focusing free of monochromatic aberrations (i.e., spherical and coma), anomalous reflection, and large circular dichroism. Recently, dielectric metasurfaces that compensate the phase dispersion responsible for chromatic aberrations have been demonstrated. Here, we utilize an aperiodic array of coupled dielectric nanoresonators to demonstrate a multiwavelength achromatic lens. The focal length remains unchanged for three wavelengths in the near-infrared region (1300, 1550, and 1800 nm). Experimental results are in agreement with full-wave simulations. Our findings are an essential step toward a realization of broadband flat optical elements.

  7. Photochromic lens mirror-coated with Cr

    Science.gov (United States)

    Shin, Sungho; Lee, Myeongkyu

    2007-11-01

    We have designed and fabricated mirror-coated photochromic lenses for use in sunglasses. These lenses consisted of a Cr thin film sandwiched between two SiO2 layers on the front surface and an anti-reflection (AR) coating on the backside. The SiO2 films above and below the Cr layer were introduced as the protection and buffer layers, respectively. The AR coating was to suppress back-reflection from the lens surface. Deposition of all coating layers were carried out by an e-beam evaporator under Ar atmosphere at P = 10-5 Torr and T = 70 °C. As expected, the overall transmittance decreased with increasing Cr thickness. For a Cr layer of 5 nm thickness, it changed from about 45% in the bleached state down to 25% after exposure to sunlight. This is consistent with the transmission range typically required for sunglasses.

  8. Large scale water lens for solar concentration.

    Science.gov (United States)

    Mondol, A S; Vogel, B; Bastian, G

    2015-06-01

    Properties of large scale water lenses for solar concentration were investigated. These lenses were built from readily available materials, normal tap water and hyper-elastic linear low density polyethylene foil. Exposed to sunlight, the focal lengths and light intensities in the focal spot were measured and calculated. Their optical properties were modeled with a raytracing software based on the lens shape. We have achieved a good match of experimental and theoretical data by considering wavelength dependent concentration factor, absorption and focal length. The change in light concentration as a function of water volume was examined via the resulting load on the foil and the corresponding change of shape. The latter was extracted from images and modeled by a finite element simulation.

  9. Intraocular lens employed for cataract surgery

    Science.gov (United States)

    Roszkowska, A. M.; Torrisi, L.

    2014-04-01

    The aim of this paper is to illustrate the techniques of cataract surgery with implantation of intraocular lenses and some physical properties of the used materials. The new technology, coupled with extensive experience and the studied cases, permits to increase the standardization and accuracy of the engravings, by reducing the use and handling of surgical instruments inside the eye. At present it is possible to replace the cataract with crystalline lenses based on biopolymers such as PMMA, silicone, acrylic hydrophilic and hydrophobic acrylic. These materials are increasingly able to replace the natural lens and to ensure the fully functional of the eye. The role of femtosecond lasers in cataract surgery, to assist or replace several aspects of the manual cataract surgery, are discussed.

  10. CERN through the lens of Peter Ginter

    CERN Multimedia

    2008-01-01

    This summer, passers-by along the Quai Wilson on the banks of Lake Geneva will be able to enjoy an unusual exhibition of photographs devoted to CERN and the LHC. Fifty images from the work of Peter Ginter, organized into themes, give strollers on the Quai Wilson a glimpse of the unique human and scientific adventure at CERN. An exhibition panel, showing a scientist against the background of ALICE’s huge red electromagnet.CERN will reach an important milestone in 2008 with the start-up of the LHC, opening a new window on our Universe for physicists around the world. To celebrate this event with the people who live around Lake Geneva and visitors to the area, CERN and the city of Geneva are jointly putting on the photography exhibition "CERN through the lens of Peter Ginter", which opens on 29 May. A group of some fifty images taken by the German photo...

  11. Spectral analysis and comparison of mineral deposits forming in opacified intraocular lens and senile cataractous lens

    Science.gov (United States)

    Lin, Shan-Yang; Chen, Ko-Hwa; Lin, Chih-Cheng; Cheng, Wen-Ting; Li, Mei-Jane

    2010-10-01

    This preliminary report was attempted to compare the chemical components of mineral deposits on the surfaces of an opacified intraocular lens (IOL) and a calcified senile cataractous lens (SCL) by vibrational spectral diagnosis. An opacified intraocular lens (IOL) was obtained from a 65-year-old male patient who had a significant decrease in visual acuity 2-years after an ocular IOL implantation. Another SCL with grayish white calcified plaque on the subcapsular cortex was isolated from a 79-year-old male patient with complicated cataract after cataract surgery. Optical light microscope was used to observe both samples and gross pictures were taken. Fourier transform infrared (FT-IR) and Raman microspectroscopic techniques were employed to analyze the calcified deposits. The curve-fitting algorithm using the Gaussian function was also used to quantitatively estimate the chemical components in each deposit. The preliminary results of spectral diagnosis indicate that the opacified IOL mainly consisted of the poorly crystalline, immature non-stoichiometric hydroxyapatite (HA) with higher content of type B carbonated apatites. However, the calcified plaque deposited on the SCL was comprised of a mature crystalline stoichiometric HA having higher contents of type A and type B carbonate apatites. More case studies should be examined in future.

  12. Aspherical Lens Design Using Genetic Algorithm for Reducing Aberrations in Multifocal Artificial Intraocular Lens

    Directory of Open Access Journals (Sweden)

    Chih-Ta Yen

    2015-09-01

    Full Text Available A complex intraocular lens (IOL design involving numerous uncertain variables is proposed. We integrated a genetic algorithm (GA with the commercial optical design software of (CODE V to design a multifocal IOL for the human eye. We mainly used an aspherical lens in the initial state to the crystalline type; therefore, we used the internal human eye model in the software. The proposed optimized algorithm employs a GA method for optimally simulating the focusing function of the human eye; in this method, the thickness and curvature of the anterior lens and the posterior part of the IOL were varied. A comparison of the proposed GA-designed IOLs and those designed using a CODE V built-in optimal algorithm for 550 degrees myopia and 175 degrees astigmatism conditions of the human eye for pupil size 6 mm showed that the proposed IOL design improved the spot size of root mean square (RMS, tangential coma (TCO and modulation transfer function (MTF at a spatial frequency of 30 with a pupil size of 6 mm by approximately 17%, 43% and 35%, respectively. However, the worst performance of spherical aberration (SA was lower than 46%, because the optical design involves a tradeoff between all aberrations. Compared with the traditional CODE V built-in optimal scheme, the proposed IOL design can efficiently improve the critical parameters, namely TCO, RMS, and MTF.

  13. Contrast sensitivity after refractive lens exchange with a multifocal diffractive aspheric intraocular lens

    Directory of Open Access Journals (Sweden)

    Teresa Ferrer-Blasco

    2013-04-01

    Full Text Available PURPOSE: To evaluate distance and near contrast sensitivity (CS under photopic and mesopic conditions before and after refractive lens exchange (RLE and implantation of the aspheric AcrySof®ReSTOR® (SN6AD3 model intraocular lens (IOL. METHODS:Seventy-four eyes of 37 patients after RLE underwent bilateral implantation with the aspheric AcrySof ReSTOR IOL. The patient sample was divided into myopic and hyperopic groups. Monocular uncorrected visual acuity at distance and near (UCVA and UCNVA, respectively and monocular best corrected visual acuity at distance and near (BCVA and BCNVA, respectively were measured before and 6 months postoperatively. Monocular CS function was measured at three different luminance levels (85, 5 and 2.5 cd/m² before and after RLE. Post-implantation results at 6 months were compared with those found before surgery. RESULTS: Our results revealed that patients in both groups obtained good UCVA and BCVA after RLE at distance and near vision in relation to pre-surgery values. No statistically significant differences were found between the values of CS pre and post-RLE at distance and near, at any lighting condition and spatial frequency (p>0.002. CONCLUSIONS: Refractive lens exchange with aspheric AcrySof ReSTOR IOL in myopic and hyperopic population provided good visual function and yield good distance and near CS under photopic and mesopic conditions.

  14. Gravitational Lens Recovery with GLASS: Measuring the mass profile and shape of a lens

    CERN Document Server

    Coles, Jonathan P; Saha, Prasenjit

    2014-01-01

    We use a new non-parametric gravitational modelling tool -- GLASS -- to determine what quality of data (strong lensing, stellar kinematics, and/or stellar masses) are required to measure the circularly averaged mass profile of a lens and its shape. GLASS uses an under-constrained adaptive grid of mass pixels to model the lens, searching through thousands of models to marginalise over model uncertainties. Our key findings are as follows: (i) for pure lens data, multiple sources with wide redshift separation give the strongest constraints as this breaks the well-known mass-sheet or steepness degeneracy; (ii) a single quad with time delays also performs well, giving a good recovery of both the mass profile and its shape; (iii) stellar masses -- for lenses where the stars dominate the central potential -- can also break the steepness degeneracy, giving a recovery for doubles almost as good as having a quad with time delay data, or multiple source redshifts; (iv) stellar kinematics provide a robust measure of the ...

  15. Thermal optical path difference analysis of off-axis lens ray trace foot-print at Cassegrain telescope correct lens assembly

    Science.gov (United States)

    Hsu, Ming-Ying; Lin, Yu-Chuan; Chan, Chia-Yen; Lin, Wei-Cheng; Chan, Shenq-Tsong; Huang, Ting-Ming

    2012-10-01

    The Cassegrain telescope system in this study, is discussion correct lens thermal OPD (Optical Path Difference) effect optical performance. The correct lens assembly are includes several components such as correct lens, lens mount, spacer, mount barrel and retainer. The heat transfer from surrounding to the correct lens barrel will causes optical system aberration. Meanwhile, the off-axis rays path of the OPD must consider lens incidence point and emergence point. The correct lens temperature distribution is calculate the lens barrel heat transfer analysis, the thermal distortion and stress are solve by FEM (Finite Element Method) software. The temperature calculation results can be weighting to each incidence ray path and calculate thermal OPD. The thermal OPD on Z-direction can be fitted by rigid body motion and Zernike polynomial. The fitting results can be used to evaluate the thermal effect on correct lens assembly in telescope system.

  16. Solar lens mission concept for interstellar exploration

    Science.gov (United States)

    Brashears, Travis; Lubin, Philip; Turyshev, Slava; Shao, Michael; Zhang, Qicheng

    2015-09-01

    The long standing approach to space travel has been to incorporate massive on-board electronics, probes and propellants to achieve space exploration. This approach has led to many great achievements in science, but will never help to explore the interstellar medium. Fortunately, a paradigm shift is upon us in how a spacecraft is constructed and propelled. This paper describes a mission concept to get to our Sun's Gravity Lens at 550AU in less than 10 years. It will be done by using DE-STAR, a scalable solar-powered phased-array laser in Earth Orbit, as a directed energy photon drive of low-mass wafersats. [1] [2] [3] [4] [5] With recent technologies a complete mission can be placed on a wafer including, power from an embedded radio nuclear thermal generator (RTG), PV, laser communications, imaging, photon thrusters for attitude control and other sensors. As one example, a futuristic 200 MW laser array consisting of 1 - 10 kw meter scale sub elements with a 100m baseline can propel a 10 gram wafer scale spacecraft with a 3m laser sail to 60AU/Year. Directed energy propulsion of low-mass spacecraft gives us an opportunity to capture images of Alpha Centauri and its planets, detailed imaging of the cosmic microwave background, set up interstellar communications by using gravity lenses around nearby stars to boost signals from interstellar probes, and much more. This system offers a very large range of missions allowing hundreds of wafer scale payload launches per day to reach this cosmological data reservoir. Directed Energy Propulsion is the only current technology that can provide a near-term path to utilize our Sun's Gravity Lens.

  17. Ultrafast laser driven micro-lens to focus and energy select MeV protons

    Energy Technology Data Exchange (ETDEWEB)

    Toncian, Toma

    2008-05-15

    A technique for simultaneous focusing and energy selection of high-current, MeV proton beams using radial, transient electric fields (10{sup 7}-10{sup 10} V/m) triggered on the inner wall of a hollow micro-cylinder by an intense, sub-picosecond laser-pulse is presented. Due to the transient nature of the radial focusing field, the proposed method allows selection of a desired range out of the spectrum of the poly-energetic proton beam. This technique addresses current drawbacks of laser-accelerated proton beams, i.e. their broad spectrum and divergence at the source. This thesis presents both experimental and computational studies that led to the understanding of the physical processes driving the micro-lens. After an one side irradiation of a hollow metallic cylinder a radial electric field develops inside the cylinder. Hot electrons generated by the interaction between laser pulse and cylinder wall spread inside the cylinder generating a plasma at the wall. This plasma expands into vacuum and sustains an electric field that acts as a collecting lens on a proton beam propagating axially through the cylinder. Both focusing and the reduction of the intrinsic beam divergence from 20 deg to.3 deg for a narrow spectral range was demonstrated. By sub-aperturing the beam a narrow spectral range ({delta}{epsilon}/{epsilon} < 3%) was selected from the poly-energetic beam. The micro-lens properties are tunable allowing for optimization towards applications. Optical probing techniques and proton imaging were employed to study the spacial and temporal evolution of the field and revealed a complex physical scenario of the rise and decay of the radial electric field. Each aspect studied experimentally is interpreted using 2D PIC and ray tracing simulations. A very good agreement between the experimental and computational data is found. The PIC simulations are used to upscale the demonstrated micro-lens capabilities to the focusing of a 270 MeV proton beam, an energy relevant

  18. MALDI-MS-imaging of whole human lens capsule.

    Science.gov (United States)

    Ronci, Maurizio; Sharma, Shiwani; Chataway, Tim; Burdon, Kathryn P; Martin, Sarah; Craig, Jamie E; Voelcker, Nicolas H

    2011-08-05

    The ocular lens capsule is a smooth, transparent basement membrane that encapsulates the lens and is composed of a rigid network of interacting structural proteins and glycosaminoglycans. During cataract surgery, the anterior lens capsule is routinely removed in the form of a circular disk. We considered that the excised capsule could be easily prepared for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry imaging (MALDI-MSI) analysis. MALDI-MSI is a powerful tool to elucidate the spatial distribution of small molecules, peptides, and proteins within tissues. Here, we apply this molecular imaging technique to analyze the freshly excised human lens capsule en face. We demonstrate that novel information about the distribution of proteins by MALDI-MSI can be obtained from this highly compact connective tissue, having no evident histo-morphological characteristics. Trypsin digestion carried out on-tissue is shown to improve MALDI-MSI analysis of human lens capsules and affords high repeatability. Most importantly, MALDI-MSI analysis reveals a concentric distribution pattern of proteins such as apolipoprotein E (ApoE) and collagen IV alpha-1 on the anterior surface of surgically removed lens capsule, which may indicate direct or indirect effects of environmental and mechanical stresses on the human ocular lens.

  19. c-myc Regulates Cell Proliferation during Lens Development

    Science.gov (United States)

    Gomes, Anielle L.; Rodrigues, Paulo M. G.; Martins, Rodrigo A. P.

    2014-01-01

    Myc protooncogenes play important roles in the regulation of cell proliferation, growth, differentiation and survival during development. In various developing organs, c-myc has been shown to control the expression of cell cycle regulators and its misregulated expression is detected in many human tumors. Here, we show that c-myc gene (Myc) is highly expressed in developing mouse lens. Targeted deletion of c-myc gene from head surface ectoderm dramatically impaired ocular organogenesis, resulting in severe microphtalmia, defective anterior segment development, formation of a lens stalk and/or aphakia. In particular, lenses lacking c-myc presented thinner epithelial cell layer and growth impairment that was detectable soon after its inactivation. Defective development of c-myc-null lens was not caused by increased cell death of lens progenitor cells. Instead, c-myc loss reduced cell proliferation, what was associated with an ectopic expression of Prox1 and p27Kip1 proteins within epithelial cells. Interestingly, a sharp decrease in the expression of the forkhead box transcription factor Foxe3 was also observed following c-myc inactivation. These data represent the first description of the physiological roles played by a Myc family member in mouse lens development. Our findings support the conclusion that c-myc regulates the proliferation of lens epithelial cells in vivo and may, directly or indirectly, modulate the expression of classical cell cycle regulators in developing mouse lens. PMID:24503550

  20. Fgf19 is required for zebrafish lens and retina development.

    Science.gov (United States)

    Nakayama, Yoshiaki; Miyake, Ayumi; Nakagawa, Yu; Mido, Tomotaka; Yoshikawa, Maya; Konishi, Morichika; Itoh, Nobuyuki

    2008-01-15

    Fgf signaling plays crucial roles in morphogenesis. Fgf19 is required for zebrafish forebrain development. Here, we examined the roles of Fgf19 in the formation of the lens and retina in zebrafish. Knockdown of Fgf19 caused a size reduction of the lens and the retina, failure of closure of the choroids fissure, and a progressive expansion of the retinal tissue to the midline of the forebrain. Fgf19 expressed in the nasal retina and lens was involved in cell survival but not cell proliferation during embryonic lens and retina development. Fgf19 was essential for the differentiation of lens fiber cells in the lens but not for the neuronal differentiation and lamination in the retina. Loss of nasal fate in the retina caused by the knockdown of Fgf19, expansion of nasal fate in the retina caused by the overexpression of Fgf19 and eye transplantation indicated that Fgf19 in the retina was crucial for the nasal-temporal patterning of the retina that is critical for the guidance of retinal ganglion cell axons. Knockdown of Fgf19 also caused incorrect axon pathfinding. The present findings indicate that Fgf19 positively regulates the patterning and growth of the retina, and the differentiation and growth of the lens in zebrafish.

  1. Flavin nucleotides in human lens: regional distribution in brunescent cataracts.

    Science.gov (United States)

    Bhat, K S; Nayak, S

    1998-12-01

    The biochemical mechanism(s) underlying brunescent cataracts remain unclear. Oxidative stress due to reactive oxygen species may have a role in the pigmentation process in eye lens. We have analysed human cataractous lenses for flavins by high-performance liquid chromatography (HPLC), since flavins are light sensitive and act as endogenous sensitizers generating reactive oxygen species in the eye. The most significant observation in this study is that higher levels of flavin nucleotides occur in brown lens compared to yellow lens. The concentration of flavin nucleotides (flavin monouncleotide, FMN + flavin adenine dinucleotide, FAD) was highest in the nuclear region of the lens followed by the cortical and capsule-epithelial regions. However, the ratio of FAD/FMN was lowest in the nuclear region of the lens followed by other regions. On the other hand, riboflavin was not detected in any of the lens (cataractous) regions. These results suggest that the observed increase in flavin nucleotides in the ocular tissue could contribute towards deepening of lens pigmentation.

  2. Finite Element Analysis of the LOLA Receiver Telescope Lens

    Science.gov (United States)

    Matzinger, Elizabeth

    2007-01-01

    This paper presents the finite element stress and distortion analysis completed on the Receiver Telescope lens of the Lunar Orbiter Laser Altimeter (LOLA). LOLA is one of six instruments on the Lunar Reconnaissance Orbiter (LRO), scheduled to launch in 2008. LOLA's main objective is to produce a high-resolution global lunar topographic model to aid in safe landings and enhance surface mobility in future exploration missions. The Receiver Telescope captures the laser pulses transmitted through a diffractive optical element (DOE) and reflected off the lunar surface. The largest lens of the Receiver Telescope, Lens 1, is a 150 mm diameter aspheric lens originally designed to be made of BK7 glass. The finite element model of the Receiver Telescope Lens 1 is comprised of solid elements and constrained in a manner consistent with the behavior of the mounting configuration of the Receiver Telescope tube. Twenty-one temperature load cases were mapped to the nodes based on thermal analysis completed by LOLA's lead thermal analyst, and loads were applied to simulate the preload applied from the ring flexure. The thermal environment of the baseline design (uncoated BK7 lens with no baffle) produces large radial and axial gradients in the lens. These large gradients create internal stresses that may lead to part failure, as well as significant bending that degrades optical performance. The high stresses and large distortions shown in the analysis precipitated a design change from BK7 glass to sapphire.

  3. Numerical implementation of generalized Coddington equations for ophthalmic lens design

    Science.gov (United States)

    Rojo, P.; Royo, S.; Ramírez, J.; Madariaga, I.

    2014-02-01

    A method for general implementation in any software platform of the generalized Coddington equations is presented, developed, and validated within a Matlab environment. The ophthalmic lens design strategy is presented thoroughly, and the basic concepts of generalized ray tracing are introduced. The methodology for ray tracing is shown to include two inter-related processes. Firstly, finite ray tracing is used to provide the main direction of propagation of the considered ray at the incidence point of interest. Afterwards, generalized ray tracing provides the principal curvatures of the local wavefront at that point, and its orientation after being refracted by the lens. The curvature values of the local wavefront are interpreted as the sagital and tangential powers of the lens at the point of interest. The proposed approach is validated using a double-check of the calculated lens performance in the spherical lens case: while finite ray tracing is validated using a commercial ray tracing software, generalized ray tracing is validated using a software application for ophthalmic lens design based on the classical version of Coddington equations. Equations of the complete tracing process are developed in detail for the case of generic astigmatic ophthalmic lenses as an example. Three-dimensional representation of the sagital and tangential powers of the ophthalmic lens at all directions of gaze then becomes possible, and results are presented for lenses with different geometries.

  4. c-Myc regulates cell proliferation during lens development.

    Directory of Open Access Journals (Sweden)

    Gabriel R Cavalheiro

    Full Text Available Myc protooncogenes play important roles in the regulation of cell proliferation, growth, differentiation and survival during development. In various developing organs, c-myc has been shown to control the expression of cell cycle regulators and its misregulated expression is detected in many human tumors. Here, we show that c-myc gene (Myc is highly expressed in developing mouse lens. Targeted deletion of c-myc gene from head surface ectoderm dramatically impaired ocular organogenesis, resulting in severe microphtalmia, defective anterior segment development, formation of a lens stalk and/or aphakia. In particular, lenses lacking c-myc presented thinner epithelial cell layer and growth impairment that was detectable soon after its inactivation. Defective development of c-myc-null lens was not caused by increased cell death of lens progenitor cells. Instead, c-myc loss reduced cell proliferation, what was associated with an ectopic expression of Prox1 and p27(Kip1 proteins within epithelial cells. Interestingly, a sharp decrease in the expression of the forkhead box transcription factor Foxe3 was also observed following c-myc inactivation. These data represent the first description of the physiological roles played by a Myc family member in mouse lens development. Our findings support the conclusion that c-myc regulates the proliferation of lens epithelial cells in vivo and may, directly or indirectly, modulate the expression of classical cell cycle regulators in developing mouse lens.

  5. Critical Assessment of Correction Methods for Fisheye Lens Distortion

    Science.gov (United States)

    Liu, Y.; Tian, C.; Huang, Y.

    2016-06-01

    A fisheye lens is widely used to create a wide panoramic or hemispherical image. It is an ultra wide-angle lens that produces strong visual distortion. The distortion modeling and estimation of the fisheye lens are the crucial step for fisheye lens calibration and image rectification in computer vision and close-range photography. There are two kinds of distortion: radial and tangential distortion. Radial distortion is large for fisheye imaging and critical for the subsequent image processing. Although many researchers have developed calibration algorithms of radial distortion of fisheye lens, quantitative evaluation of the correction performance has remained a challenge. This is the first paper that intuitively and objectively evaluates the performance of five different calibration algorithms. Upto- date research on fisheye lens calibration is comprehensively reviewed to identify the research need. To differentiate their performance in terms of precision and ease-using, five methods are then tested using a diverse set of actual images of the checkerboard that are taken at Wuhan University, China under varying lighting conditions, shadows, and shooting angles. The method of rational function model, which was generally used for wide-angle lens correction, outperforms the other methods. However, the one parameter division model is easy for practical use without compromising too much the precision. The reason is that it depends on the linear structure in the image and requires no preceding calibration. It is a tradeoff between correction precision and ease-using. By critically assessing the strengths and limitations of the existing algorithms, the paper provides valuable insight and guideline for future practice and algorithm development that are important for fisheye lens calibration. It is promising for the optimal design of lens correction models that are suitable for the millions of portable imaging devices.

  6. Effects of x-irradiation on lens reducing systems. [Rabbits

    Energy Technology Data Exchange (ETDEWEB)

    Giblin, F.J.; Chakrapani, B.; Reddy, V.N.

    1978-01-01

    Studies have been made of the effects of x ray on various lens reducing systems including the levels of NADPH and glutathione (GSH), the activity of the hexose monophosphate shunt (HMS), and the activities of certain enzymes including glutathion reductase, glutathione peroxidase, and glucose-6-phosphate dehydrogenase (G-6-PD). It was found that during several weeks following x irradiation but prior to cataract formation there was very little change in the number of reduced -SH groups per unit weight of lens protein but that, with the appearance of cataract, there was a sudden loss of protein -SH groups. In contrast, the concentration of GSH in the x-rayed lens decreased throughout the experimental period. Similarly, the concentration of NADPH in the x-rayed lens was found to decrease significantly relative to controls one week prior to cataract formation and the ratio of NADPH to NADP/sup +/ in the lens shifted at this time period from a value greater than 1.0 in the control lens to less than 1.0 in the x-rayed lens. A corresponding decrease occurred in the activity of the HMS in x-rayed lenses as measured by culture in the presence of 1-/sup 14/C-labelled glucose. G-6-PD was partially inactivated in the x-rayed lens. Of the eight enzymes studied, G-6-PD appeared to be the most sensitive to x-irradiation. The data indicate that x-irradiation results in a steady decrease in the effectiveness of lens reducing systems and that, when these systems reach a critically low point, sudden oxidation of protein -SH groups and formation of high molecular weight protein aggregates may be initiated.

  7. Mass spectrometry-based proteomic analyses of contact lens deposition.

    Science.gov (United States)

    Green-Church, Kari B; Nichols, Jason J

    2008-02-08

    The purpose of this report is to describe the contact lens deposition proteome associated with two silicone hydrogel contact lenses and care solutions using a mass spectrometric-based approach. This was a randomized, controlled, examiner-masked crossover clinical trial that included 48 participants. Lenses and no-rub care solutions evaluated included galyfilcon A (Acuvue Advance, Vistakon Inc., Jacksonville, FL), lotrafilcon B (O2 Optix, CIBA Vision Inc., Duluth, GA), AQuify (CIBA Vision Inc.), and ReNu MoistureLoc (Bausch and Lomb Inc., Rochester, NY). After two weeks of daily wear in each lens-solution combination, the left lens was removed by the examiner (using gloves and forceps) and placed in a protein precipitation buffer (acetone). The precipitate was quantitated for total protein concentration (per lens), and proteins were then identified using liquid chromatography tandem mass spectrometry (nano-LC-MS/MS) and peptide sequencing. Between 7.32 and 9.76 microg/lens of protein was observed on average from each lens-solution combination. There were 19 total unique proteins identified across the two lens materials, and six proteins were identified in all four lens-solution combinations including lipocalin, lysozyme, lacritin, lactoferrin, proline rich 4, and Ig Alpha. Lotrafilcon B was associated with 15 individual proteins (across both care solutions), and 53% of these proteins were observed in at least 50% of the analyses. Galyfilcon A was associated with 13 individual proteins, and 38.5% of these proteins were observed in at least 50% of the analyses. There were three unique proteins identified from galyfilcon A and four unique proteins identified from lotrafilcon B. The total amount of proteins identified from silicone hydrogel materials is much less than the amount from traditional soft lens materials. For the most part, the deposition proteome across these lenses is similar, although the different polymer characteristics might be associated with some

  8. Test results of high-precision large cryogenic lens holders

    Science.gov (United States)

    Gal, C.; Reutlinger, A.; Boesz, A.; Leberle, T.; Mottaghibonab, A.; Eckert, P.; Dubowy, M.; Gebler, H.; Grupp, F.; Geis, N.; Bode, A.; Katterloher, R.; Bender, R.

    2012-09-01

    For the Euclid mission a Pre-Development phase is implemented to prove feasibility of individual components of the system [1]. The Near Infrared Spectrometer and Photometer (NISP) of EUCLID requires high precision large lens holders (?170 mm) at cryogenic temperatures (150K). The four lenses of the optical system are made of different materials: fused silica, CaF2, and LF5G15 that are mounted in a separate lens barrel design. Each lens has its separate mechanical interface to the lens barrel, the so called adaption ring. The performance of the lens holder design is verified by adapted test equipment and test facility including an optical metrology system. The characterization of the lens deformation and displacement (decenter, tilt) due to mechanical loads of the holder itself as well as thermally induced loads are driven by the required submicron precision range and the operational thermal condition. The surface deformation of the lens and its holder is verified by interferometric measurements, while tilt and position accuracy are measured by in-situ fibre based distance sensors. The selected distance measurement sensors have the capability to measure in a few mm range with submicron resolution in ultra high vacuum, in vibration environments and at liquid nitrogen temperatures and below. The calibration of the measurement system is of crucial importance: impacts such as temperature fluctuation, surface roughness, surface reflectivity, straylight effects, etc. on the measured distance are carefully calibrated. Inbuilt thermal expansion effects of the fibre sensors are characterized and proven with lens dummy with quasi zero CTE. The paper presents the test results and measured performance of the high precision large cryogenic lens holders attained by the metrology system. These results are presented on behalf of the EUCLID consortium.

  9. Means to flexibly attach lens frames to temple members

    Science.gov (United States)

    Smith, Harry D.

    1995-01-01

    The invention is a band hinge for flexibly connecting the temple member to the lens frame thereby preventing damage from inadvertent pressure or cyclic wear. A distinguishing feature of the invention is the use of a band hinge that holds together the temple member and the lens frame without the use of a pin or screw hinging mechanism. The invention allows for a high degree of freedom of movement for the temple member with respect to the lens frame which will prevent most forms of damages to the glasses from these types of events.

  10. Development of a universal toric intraocular lens calculator

    Science.gov (United States)

    Hjelmstad, David; Sayegh, Samir I.

    2014-02-01

    We present a method for calculating the ideal toric lens to implant in astigmatic patients following cataract surgery. We show that the online calculators provided by major toric IOL manufacturers are insufficient for both theoretical and practical reasons. We reveal important theoretical shortcomings in their approach, illustrated by a number of cases which demonstrate how the approach can lead to errors in lens selection. Our approach combines the spherical and cylindrical power calculations into one, and allows for lens data from any manufacturer to be used, eliminating the reliance on multiple programs.

  11. Vortexlike Power Flow at the Interfaces of Metamaterial Lens

    Directory of Open Access Journals (Sweden)

    K. Fang

    2012-10-01

    Full Text Available The metamaterial lens with DPS/DNS/DPS structure has been realized by using the two-dimensional (2D isotropic transmission line approach. We studied the vortexlike power flow at the interfaces of metamaterial lens and validated by the finite-difference time-domain (FDTD simulator. The computational results showing its different conditions near DPS/DNS and other kinds of interfaces are obtained by CST STUDIO SUITE at different frequencies, and demonstrate the intuitionistic power location at the metamaterial lens interfaces.

  12. Research of the long-focus Maksutov telephoto lens

    Science.gov (United States)

    Tarasov, I. P.; Tsyganok, E. A.

    2016-04-01

    The article presents the research result and the optical design of long-focus telephoto lens for photo shooting by the academician Maksutov's scheme. It shows a review of lenses for photo shooting on the market today, and also an analysis of the correctional possibilities which is based on the scheme is presented; studied long-focus telephoto lens is compared with its closest analog, the calculation of a new telephoto lens with higher image quality is made on the basis of that comparison.

  13. Comparison of shape recovery ratios in various intraocular lens haptics.

    Science.gov (United States)

    Kimura, W; Kimura, T; Sawada, T; Kikuchi, T; Toda, H; Yamada, Y; Nagai, H

    1992-11-01

    Since understanding the mechanical properties of intraocular lens (IOL) haptic materials can minimize decentration after surgery, we have examined shape recovery ratios of various intraocular lens haptics (polypropylene [PP], polyvinylidene fluoride [PVDF], extruded poly(methyl methacrylate) [PMMA]) currently on the market under conditions that approximate clinical use. The results using various Ascon lens-holding forceps and compression tests, during which the lenses were held in a cylindrical holder for seven days, one month, and three months, indicated that PVDF haptics had better shape recovery capability than PP and extruded three-piece PMMA haptics.

  14. Evolutionary algorithm for optimization of nonimaging Fresnel lens geometry.

    Science.gov (United States)

    Yamada, N; Nishikawa, T

    2010-06-21

    In this study, an evolutionary algorithm (EA), which consists of genetic and immune algorithms, is introduced to design the optical geometry of a nonimaging Fresnel lens; this lens generates the uniform flux concentration required for a photovoltaic cell. Herein, a design procedure that incorporates a ray-tracing technique in the EA is described, and the validity of the design is demonstrated. The results show that the EA automatically generated a unique geometry of the Fresnel lens; the use of this geometry resulted in better uniform flux concentration with high optical efficiency.

  15. Characteristic of laser diode beam propagation through a collimating lens.

    Science.gov (United States)

    Xu, Qiang; Han, Yiping; Cui, Zhiwei

    2010-01-20

    A mathematical model of a laser diode beam propagating through a collimating lens is presented. Wave propagation beyond the paraxial approximation is studied. The phase delay of the laser diode wave in passing through the lens is analyzed in detail. The propagation optical field after the lens is obtained from the diffraction integral by the stationary phase method. The model is employed to predict the light intensity at various beam cross sections, and the computed intensity distributions are in a good agreement with the corresponding measurements.

  16. 21 CFR 886.5918 - Rigid gas permeable contact lens care products.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Rigid gas permeable contact lens care products... contact lens care products. (a) Identification. A rigid gas permeable contact lens care product is a... rigid gas permeable contact lens. This includes all solutions and tablets used together with rigid...

  17. Outcomes of Lensectomy in Hereditary Lens Subluxation

    Directory of Open Access Journals (Sweden)

    Mohammad-Hossein Dehghan

    2008-12-01

    Full Text Available

    PURPOSE: To evaluate the results of pars plana lensectomy in patients with hereditary lens subluxation. METHOD: Hospital records of patients with hereditary lens subluxation who had undergone pars plana lensectomy at Labbafinejad Medical Center, Tehran-Iran from 1996 to 2003 were reviewed. Patients with more than 6 months of follow up were included. Underlying disorders, best corrected visual acuity (BCVA before and after surgery, intraocular pressure (IOP, postoperative refraction and complications were evaluated. RESULTS: Overall, records of 87 eyes of 49 patients including 27 male and 22 female subjects were reviewed. Mean follow up duration was 20±18 months. Underlying disorders leading to lens subluxation included Marfan syndrome (79.5%, Weill-Marchesani syndrome (8.2%, simple ectopia lentis (8.2%, and homocystinuria (4.1%. The most common indication for surgery was non-correctable refractive error (92.1%. Mean BCVA was 1.13 LogMAR (20/250 preoperatively, which improved to 0.26 LogMAR (20/30-20/40 postoperatively (P < 0.001. BCVA better than 20/40 was achieved in 82.8% of cases after surgery. Angle-supported anterior chamber intraocular lens (ACIOL was implanted in

  18. Patient comfort following thirty minutes of lens wear: piggy-back versus conventional rigid-lens wear

    OpenAIRE

    W.D.H. Gillan

    2014-01-01

    Discomfort when wearing contact lenses, especially rigid contact lenses, is a common complaint amongst neophyte as well as experienced contact lens wearers. Wearing a piggy-back system of contact lenses has been shown to improve comfort and wearing time, especially in keratoconic subjects. Twenty two normal subjects wore a rigid lens or a piggy-back system of lenses for thirty minutes and after a thirty minute break swopped the mode of lens wear and wore the second modality for a thirty minut...

  19. Dielectric Optical-Controllable Magnifying Lens by Nonlinear Negative Refraction

    Science.gov (United States)

    Cao, Jianjun; Shang, Ce; Zheng, Yuanlin; Feng, Yaming; Chen, Xianfeng; Liang, Xiaogan; Wan, Wenjie

    2015-01-01

    A simple optical lens plays an important role for exploring the microscopic world in science and technology by refracting light with tailored spatially varying refractive indices. Recent advancements in nanotechnology enable novel lenses, such as, superlens and hyperlens, with sub-wavelength resolution capabilities by specially designed materials’ refractive indices with meta-materials and transformation optics. However, these artificially nano- or micro-engineered lenses usually suffer high losses from metals and are highly demanding in fabrication. Here, we experimentally demonstrate, for the first time, a nonlinear dielectric magnifying lens using negative refraction by degenerate four-wave mixing in a plano-concave glass slide, obtaining magnified images. Moreover, we transform a nonlinear flat lens into a magnifying lens by introducing transformation optics into the nonlinear regime, achieving an all-optical controllable lensing effect through nonlinear wave mixing, which may have many potential applications in microscopy and imaging science. PMID:26149952

  20. Assessment of water quality in distribution networks through the lens ...

    African Journals Online (AJOL)

    Assessment of water quality in distribution networks through the lens of ... A previously modified CCME WQI (Islam et al., 2014) is adapted along with the weights to perform the assessment at the distribution network (DN). ... Article Metrics.

  1. Flat acoustic lens by acoustic grating with curled slits

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Pai; Xiao, Bingmu; Wu, Ying, E-mail: ying.wu@kaust.edu.sa

    2014-10-03

    We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry–Perot resonance. - Highlights: • Expression of transmission coefficient of an acoustic grating with curled slits. • Non-dispersive and tunable effective medium parameters for the acoustic grating. • A flat acoustic focusing lens with gradient index by using the acoustic grating.

  2. A single-pixel wireless contact lens display

    Science.gov (United States)

    Lingley, A. R.; Ali, M.; Liao, Y.; Mirjalili, R.; Klonner, M.; Sopanen, M.; Suihkonen, S.; Shen, T.; Otis, B. P.; Lipsanen, H.; Parviz, B. A.

    2011-12-01

    We present the design, construction and in vivo rabbit testing of a wirelessly powered contact lens display. The display consists of an antenna, a 500 × 500 µm2 silicon power harvesting and radio integrated circuit, metal interconnects, insulation layers and a 750 × 750 µm2 transparent sapphire chip containing a custom-designed micro-light emitting diode with peak emission at 475 nm, all integrated onto a contact lens. The display can be powered wirelessly from ~1 m in free space and ~2 cm in vivo on a rabbit. The display was tested on live, anesthetized rabbits with no observed adverse effect. In order to extend display capabilities, design and fabrication of micro-Fresnel lenses on a contact lens are presented to move toward a multipixel display that can be worn in the form of a contact lens. Contact lenses with integrated micro-Fresnel lenses were also tested on live rabbits and showed no adverse effect.

  3. Application of Foldable Intraocular Lens in Multiple Types of Cataract

    Institute of Scientific and Technical Information of China (English)

    Songtao Yuan; Qinghuai Liu; Qing Jiang; Nanrong Yuan

    2002-01-01

    Objective: To evaluate the clinical results of implantation of foldable intraocular lens inmultiple types of cataract.Methods: This retrospective study comprised 162 eyes of 148 patients undergoingphacoemulsification and implantation of foldable intraocular lens, some of whom under-went combined pars plana vitrectomy or trabeculectomy or silicone oil removal. Theperiod of follow-up was from 3 months to 17 months.Results: There is slight reaction postoperatively in all cases. The postoperative uncorrectedvisual acuites was from 0. 05 to 1.2, patient with 0.6 or above acuity were 70.98%. Aneodymium: YAG capsulotomy was required in 5 eyes. Posterior capsule ruptured in 1eyes, and a PMMA intraocular lens was implanted in ciliary sulcus. In one eye, a lenswas removed because of recurrence of retina detachment.Conclusions: The application of foldable intraocular lens in multiple types of cataract issafe, and there is a slight postoperative reaction. less complications , and fast visualacuity recovery.

  4. Tunable Focus Liquid Lens with Radial-Patterned Electrode

    Directory of Open Access Journals (Sweden)

    Miao Xu

    2015-08-01

    Full Text Available A dielectric liquid lens is prepared based on our previous work. By optimizing the device structure, the liquid lens presents a converging focus with good resolution and changes its focal length over a broad range with a low driving voltage. For a liquid lens with ~2.3 mm diameter in the relaxed state, it can resolve ~40 lp/mm. The resolution does not degrade during focus change. Its focal length can be varied from ~12 to ~5 mm when the applied voltage is changed from 0 to 28 Vrms. The response time of one cycle is ~2.5 s. Our liquid lens, with a low driving voltage for a large dynamic range, has potential applications in imaging, biometrics, optoelectronic, and lab-on-chip devices.

  5. Ultra-precision molding of chalcogenide glass aspherical lens

    Science.gov (United States)

    Zhang, Feng; Wang, Zhibin; Zhang, Yunlong; Su, Ying; Guo, Rui; Xu, Zengqi; Liu, Xuanmin

    2016-10-01

    With the development of infrared optical systems in military and civil areas, chalcogenide glass aspherical lens possess some advantages, such as large infrared transmission, good thermal stability performance and image quality. Aspherical lens using chalcogenide glass can satisfy the requirements of modern infrared optical systems. Therefore, precision manufacturing of chalcogenide glass aspheric has received more and more attention. The molding technology of chalcogenide glass aspheric has become a research hotspot, because it can achieve mass and low cost manufacturing. The article of molding technology is focusing on a kind of chalcogenide glass aspherical lens. We report on design and fabrication of the mold that through simulation analysis of molding. Finally, through molding test, the fabrication of mold's surface and parameters of molding has been optimized, ensuring the indicators of chalcogenide glass aspherical lens meet the requirements.

  6. A spiral plasmonic lens with directional excitation of surface plasmons.

    Science.gov (United States)

    Guo, Qingrui; Zhang, Chi; Hu, Xinhua

    2016-08-26

    Conventional plasmonic lenses are composed of curved slits carved through metallic films. Here, we propose a new plasmonic lens based on a metallic slit with an auxiliary groove. When the lens is illumined normally, only inward surface plasmon polaritons (SPPs) can be generated and then focused into a hot spot at the center of the lens. The focusing effect is theoretically investigated by varying the groove parameters and incident polarizations. It is found that this phenomenon exists for both the circular and linear polarizations of incidence. Under optimal groove parameters, the intensity of the focal spot in our lens can be 2.5 times of that in one without grooves for both linearly and circularly polarized illuminations.

  7. Negative time delay of light by a gravitational concave lens

    CERN Document Server

    Nakajima, Koki; Asada, Hideki

    2014-01-01

    Gravitational lens models, some of which might act as if a concave lens, have been recently investigated by using a static and spherically symmetric modified spacetime metric that depends on the inverse distance to the $n$-th power [Kitamura, Nakajima and Asada, PRD 87, 027501 (2013)]. We reexamine the time delay of light in a gravitational concave lens as well as a gravitational convex one. The frequency shift due to the time delay is also investigated. We show that the sign of the time delay in the lens models is the same as that of the deflection angle of light. The size of the time delay decreases with increase in the parameter $n$. We discuss also possible parameter ranges that are relevant to pulsar timing measurements in our galaxy.

  8. 600 Volt Stretched Lens Array for Solar Electric Propulsion Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Over the past six years, ENTECH, Auburn, NASA, and other organizations have developed a new space photovoltaic array called the Stretched Lens Array (SLA), which...

  9. Magnifying lens for 800 MeV proton radiography.

    Science.gov (United States)

    Merrill, F E; Campos, E; Espinoza, C; Hogan, G; Hollander, B; Lopez, J; Mariam, F G; Morley, D; Morris, C L; Murray, M; Saunders, A; Schwartz, C; Thompson, T N

    2011-10-01

    This article describes the design and performance of a magnifying magnetic-lens system designed, built, and commissioned at the Los Alamos National Laboratory (LANL) for 800 MeV flash proton radiography. The technique of flash proton radiography has been developed at LANL to study material properties under dynamic loading conditions through the analysis of time sequences of proton radiographs. The requirements of this growing experimental program have resulted in the need for improvements in spatial radiographic resolution. To meet these needs, a new magnetic lens system, consisting of four permanent magnet quadrupoles, has been developed. This new lens system was designed to reduce the second order chromatic aberrations, the dominant source of image blur in 800 MeV proton radiography, as well as magnifying the image to reduce the blur contribution from the detector and camera systems. The recently commissioned lens system performed as designed, providing nearly a factor of three improvement in radiographic resolution.

  10. CFD model of a spinning pipe gas lens

    CSIR Research Space (South Africa)

    Snedden, Glen C

    2006-07-01

    Full Text Available Slides on: Spinning Pipe Gas Lens; Focal Length; Refractive Index; Gas Dynamics; Guess at the gas dynamics; Density Profile; Flow Profile; Rosby Waves; Rayleigh–Taylor Instabilities...

  11. Applications of thermal lens spectrometry in food industry and agriculture.

    NARCIS (Netherlands)

    Franko, M.; Bicanic, D.; Gibkes, J.; Bremer, M.; Akkermans, E.

    1996-01-01

    Applications of CO laser dual beam thermal lens spectrometry (TLS) for detection and characterization of fatty acids, aldehydes, pesticides, and herbicides in liquid samples are described. Also reported is the first TLS measurement of thermal conductivity for oleic acid.

  12. Degeneracies of parametric lens model families near folds and cusps

    CERN Document Server

    Wagner, Jenny

    2015-01-01

    We develop an approach to select families of lens models that can describe doubly and triply gravitationally lensed images near folds and cusps using the model-independent ratios of lensing-potential derivatives derived in Wagner & Bartelmann (2015). Models are selected by comparing these model-independent ratios of potential derivatives to (numerically determined) ratios of potential derivatives along critical curves for entire lens model families in a given range of parameter values. This comparison returns parameter ranges which lens model families can reproduce observation within, as well as sections of the critical curve where image sets of the observed type can appear. If the model-independent potential-derivative ratios inferred from the observation fall outside the range of these ratios derived for the lens model family, the entire family can be excluded as a feasible model in the given volume in parameter space. We employ this approach for the family of singular isothermal spheres with external s...

  13. Constraints on cosmological models from lens redshift data

    CERN Document Server

    Cao, Shuo

    2011-01-01

    Strong lensing has developed into an important astrophysical tool for probing both cosmology and galaxies (their structures, formations, and evolutions). Now several hundreds of strong lens systems produced by massive galaxies have been discovered, which may form well-defined samples useful for statistical analyses. To collect a relatively complete lens redshift data from various large systematic surveys of gravitationally lensed quasars and check the possibility to use it as a future complementarity to other cosmological probes. We use the distribution of gravitationally-lensed image separations observed in the Cosmic Lens All-Sky Survey (CLASS), the PMN-NVSS Extragalactic Lens Survey (PANELS), the Sloan Digital Sky Survey (SDSS) and other surveys, considering a singular isothermal ellipsoid (SIE) model for galactic potentials as well as improved new measurements of the velocity dispersion function of galaxies based on the SDSS DR5 data and recent semi-analytical modeling of galaxy formation, to constrain tw...

  14. Multiaxial mechanical behavior of the porcine anterior lens capsule.

    Science.gov (United States)

    Heistand, M R; Pedrigi, R M; Delange, S L; Dziezyc, J; Humphrey, J D

    2005-11-01

    The biomechanics of the lens capsule of the eye is important both in physiologic processes such as accommodation and clinical treatments such as cataract surgery. Although the lens capsule experiences multiaxial stresses in vivo, there have been no measurements of its multiaxial properties or possible regional heterogeneities. Rather all prior mechanical data have come from 1-D pressure-volume or uniaxial force-length tests. Here, we report a new experimental approach to study in situ the regional, multiaxial mechanical behavior of the lens capsule. Moreover, we report multiaxial data suggesting that the porcine anterior lens capsule exhibits a typical nonlinear pseudo-elastic behavior over finite strains, that the in situ state is pre-stressed multi-axially, and that the meridional and circumferential directions are principal directions of strain, which is nearly equi-biaxial at the pole but less so towards the equator. Such data are fundamental to much needed constitutive formulations.

  15. Regional multiaxial mechanical properties of the porcine anterior lens capsule.

    Science.gov (United States)

    David, G; Pedrigi, R M; Heistand, M R; Humphrey, J D

    2007-02-01

    The lens capsule of the eye plays fundamental biomechanical roles in both normal physiological processes and clinical interventions. There has been modest attention given to the mechanical properties of this important membrane, however, and prior studies have focused on 1-D analyses of the data. We present results that suggest that the porcine anterior lens capsule has a complex, regionally dependent, nonlinear, anisotropic behavior. Specifically, using a subdomain inverse finite element method to analyze data collected via a new biplane video-based test system, we found that the lens capsule is nearly isotropic (in-plane) near the pole but progressively stiffer in the circumferential compared to the meridional direction as one approaches the equator. Because the porcine capsule is a good model of the young human capsule, there is strong motivation to determine if similar regional variations exist in the human lens capsule for knowledge of such complexities may allow us to improve the design of surgical procedures and implants.

  16. An Atomic Lens Using a Focusing Hollow Beam

    Institute of Scientific and Technical Information of China (English)

    夏勇; 印建平; 王育竹

    2003-01-01

    We propose a new method to generate a focused hollow laser beam by using an azimuthally distributed 2π-phase plate and a convergent thin lens, and calculate the intensity distribution of the focused hollow beam in free propagation space. The relationship between the waist w0 of the incident collimated Gaussian beam and the dark spot size of the focused hollow beam at the focal point, and the relationship between the focal length f of the thin lens and the dark spot size are studied respectively. The optical potential of the blue-detuned focused hollow beam for 85Rb atoms is calculated. Our study shows that when the larger waist w of the incident Gaussian beam and the shorter focal length f of the lens are chosen, we can obtain an extremely small dark spot size of the focused hollow beam, which can be used to form an atomic lens with a resolution of several angstroms.

  17. Perforation forces of the intact porcine anterior lens capsule.

    Science.gov (United States)

    Ullrich, Franziska; Lussi, Jonas; Felekis, Dimitrios; Michels, Stephan; Petruska, Andrew J; Nelson, Bradley J

    2016-09-01

    During the first step of cataract surgery, the lens capsule is perforated and a circular hole is created with a sharp instrument, a procedure called capsulorhexis. To develop automated systems that can assist ophthalmologists during capsulorhexis, the forces required must be quantified. This study investigates perforation forces of the central anterior lens capsule in porcine eyes, which are used as a conservative model for the human eye. A micro-mechanical characterisation method is presented that measures capsular bag perforation forces with a high precision positioning and high-resolution force sensing system. The force during perforation of the anterior lens capsule was measured with various sized needles and indentation speeds and is found to be 15-35mN. A bio-mechanical model is identified that describes an exponential correlation between indentation force and depth, indicating strain hardening behaviour of the porcine anterior lens capsule.

  18. A 3D printed helical antenna with integrated lens

    KAUST Repository

    Farooqui, Muhammad Fahad

    2015-10-26

    A novel antenna configuration comprising a helical antenna with an integrated lens is demonstrated in this work. The antenna is manufactured by a unique combination of 3D printing of plastic material (ABS) and inkjet printing of silver nano-particle based metallic ink. The integration of lens enhances the gain by around 7 dB giving a peak gain of about 16.4 dBi at 9.4 GHz. The helical antenna operates in the end-fire mode and radiates a left-hand circularly polarized (LHCP) pattern. The 3-dB axial ratio (AR) bandwidth of the antenna with lens is 3.2 %. Due to integration of lens and fully printed processing, this antenna configuration offers high gain performance and requires low cost for manufacturing.

  19. Fibroblast growth factor receptor signaling is essential for lens fiber cell differentiation

    OpenAIRE

    Zhao, Haotian; Yang, Tianyu; Madakashira, Bhavani P.; Thiels, Cornelius A.; Bechtle, Chad A.; Garcia, Claudia M.; Zhang, Huiming; Yu, Kai; Ornitz, David M.; Beebe, David C.; Robinson, Michael L.

    2008-01-01

    The vertebrate lens provides an excellent model to study the mechanisms that regulate terminal differentiation. Although fibroblast growth factors (FGFs) are thought to be important for lens cell differentiation, it is unclear which FGF receptors mediate these processes during different stages of lens development. Deletion of three FGF receptors (Fgfr1-3) early in lens development demonstrated that expression of only a single allele of Fgfr2 or Fgfr3 was sufficient for grossly normal lens dev...

  20. The Influence of Different OK Lens Designs on Peripheral Refraction.

    Science.gov (United States)

    Kang, Pauline; Swarbrick, Helen

    2016-09-01

    To compare peripheral refraction changes along the horizontal and vertical meridians induced by three different orthokeratology (OK) lens designs: BE, Paragon CRT, and Contex lenses. Nineteen subjects (6M, 13F, mean age 28 ± 7 years) were initially fitted with BE OK lenses in both eyes which were worn overnight for 14 days. Central and peripheral refraction and corneal topography were measured at baseline and after 14 nights of lens wear. After a minimum 2-week washout period, one randomly selected eye was re-fitted with a Paragon CRT lens and the other eye with a Contex OK lens. Measurements were repeated before and after 14 nights of lens wear. The three different OK lenses caused significant changes in peripheral refraction along both the horizontal and vertical visual fields (VFs). BE and Paragon CRT lenses induced a significant hyperopic shift within the central ±20° along the horizontal VF and at all positions along the vertical meridian except at 30° in the superior VF. There were no significant differences in peripheral refraction changes induced between BE and Paragon CRT lenses. When comparing BE and Contex OK lens designs, BE caused greater hyperopic shifts at 10° and 30° in the temporal VF and at center, 10°, and 20° in the superior VF along the vertical meridian. Furthermore, BE lenses caused greater reduction in Flat and Steep K values compared to Contex OK. OK lenses induced significant changes in peripheral refraction along the horizontal and vertical meridians. Despite the clinically significant difference in central corneal flattening induced by BE and Contex OK lenses, relative peripheral refraction changes differed minimally between the three OK lens designs. If the peripheral retina influences refractive error development, these results suggest that myopia control effects are likely to be similar between different OK lens designs.

  1. Adjusting to a sudden “aging” of the lens

    OpenAIRE

    Tregillus, KEM; Werner., JS; Webster, MA

    2016-01-01

    Color perception is known to remain largely stable across the lifespan despite the pronounced changes in sensitivity from factors such as the progressive brunescence of the lens. However, the mechanisms and timescales controlling these compensatory adjustments are still poorly understood. In a series of experiments, we tracked adaptation in observers after introducing a sudden change in lens density by having observers wear glasses with yellow filters that approximated the average spectral tr...

  2. Rapid scanning thermal lens/laser transmission densitometer.

    Science.gov (United States)

    Peck, K; Demana, T; Morris, M D

    1988-01-01

    An automated densitometer based on the thermal lens principle is described. The apparatus also operates as a conventional laser transmission densitometer. Comparison of the performance in both modes shows that thermal lens densitometry provides lower detection limits, but that transmission densitometry is more satisfactory at high optical densities. The instrument is characterized with proteins separated by SDS-PAGE and stained with Coomassie Brilliant Blue G250.

  3. Signal-enhancement reflective pulse oximeter with Fresnel lens

    Science.gov (United States)

    Chung, Shuang-Chao; Sun, Ching-Cherng

    2016-09-01

    In this paper, a new reflective pulse oximeter is proposed and demonstrated with implanting a Fresnel lens, which enhances the reflected signal. An optical simulation model incorporated with human skin characteristics is presented to evaluate the capability of the Fresnel lens. In addition, the distance between the light emitting diode and the photodiode is optimized. Compared with the other reflective oximeters, the reflected signal light detected by the photodiode is enhanced to more than 140%.

  4. OPTICAL REALIZATION OF WAVELET TRANSFORM WITH A SINGLE LENS

    Institute of Scientific and Technical Information of China (English)

    王取泉; 熊贵光; 李承芳; 张苏淮; 王琳

    2001-01-01

    Two optical set-ups to implement wavelet transform with a single lens have been proposed, in which the wavelet filter was placed in front of the imaging lens or on the frequency plane. The general formula of the complex field distribution of the output plane has been deduced. The analysing wavelet functions of the band-pass wavelet filters with double and circular slits have been discussed.

  5. Supersymmetric black holes with lens-space topology.

    Science.gov (United States)

    Kunduri, Hari K; Lucietti, James

    2014-11-21

    We present a new supersymmetric, asymptotically flat, black hole solution to five-dimensional supergravity. It is regular on and outside an event horizon of lens-space topology L(2,1). It is the first example of an asymptotically flat black hole with lens-space topology. The solution is characterized by a charge, two angular momenta, and a magnetic flux through a noncontractible disk region ending on the horizon, with one constraint relating these.

  6. Late opacification of a hydrophilic acrylic intraocular lens

    Directory of Open Access Journals (Sweden)

    Al-Bdour Muawyah

    2008-01-01

    Full Text Available Cataract extraction and intraocular lens implantation is considered to be a safe procedure in most cases. However, the new advances in the surgical technique namely phacoemulsification and hence the increased use of foldable intraocular lenses have given rise to new complications including late opacification of intraocular lenses. In this case we report late opacification of a foldable hydrophilic acrylic intraocular lens and the surgical technique for its exchange.

  7. Softec HD hydrophilic acrylic intraocular lens: biocompatibility and precision

    OpenAIRE

    Ladan Espandar; Shameema Sikder; Majid Moshirfar

    2011-01-01

    Ladan Espandar1, Shameema Sikder2, Majid Moshirfar31Department of Ophthalmology, Tulane University, New Orleans, LA, USA; 2Wilmer Eye Institute, Johns Hopkins University, Baltimore, MD, USA; 3John A Moran Eye Center, University of Utah, Salt Lake City, UT, USAAbstract: Intraocular lens development is driven by higher patient expectations for ideal visual outcomes. The recently US Food and Drug Administration-approved Softec HD™ lens is an aspheric, hydrophilic acrylic intraocular le...

  8. Patient acceptability of the Tecnis® multifocal intraocular lens

    OpenAIRE

    Woodward, Maria; Sood,Priyanka

    2011-01-01

    Priyanka Sood1, Maria A Woodward21Emory Eye Center, Atlanta, GA, USA; 2Kellogg Eye Center, Ann Arbor, MI, USAAbstract: Cataract surgery has evolved. The goal of the surgeon includes both restoration of vision and refinement of vision. Patients' desire for spectacle independence has driven the market for presbyopia-correcting cataract surgery and development of novel intraocular lens (IOL) designs. The Tecnis® Multifocal Intraocular Lens incorporates an aspheric, modified anter...

  9. Design and simulation of large field plate lithography lens

    Science.gov (United States)

    Deng, Chao; Xing, Tingwen; Lin, Wumei; Zhu, Xianchang

    2016-10-01

    Because industry demand for LED,LCD panel continues to increase, the high yield of micron-scale resolution lithography is increasingly prominent for manufacturers, which requires the field of lithography objective lens becomes larger. This paper designed a lithography lens with large field, whose effective image side field will reach to 132 × 132mm.Subsequently, the tolerance was analysed by simulation for the optical system. Finally, it is proved that the design meets the requirements of micron-scale resolution.

  10. Retroviral expression of connexins in embryonic chick lens.

    Science.gov (United States)

    Jiang, J X; Goodenough, D A

    1998-03-01

    To develop an in vivo model system in which exogenous proteins can be expressed in embryonic chick lens and to further understand the function of connexin-mediated gap junction intercellular communication in lens cell biology. RCAS(A) is a replication-competent chicken retrovirus that infects dividing cells. Retroviral constructs were prepared containing alkaline phosphatase (AP) and FLAG-tagged connexins. Chick lenses were infected in situ by injecting virus into the lumen of lens vesicles at stage 18, cultures were taken at various periods. The lenses were then dissected, and the expressed proteins were visualized by AP histochemical examination and immunostaining. Twenty-four hours after infection, alkaline phosphatase could be seen in epithelia and fibers. As lens fiber maturation progressed, however, the alkaline phosphatase staining was lost as the fibers matured, presumably because of the proteolytic removal of the enzyme. By 72 hours, alkaline phosphatase staining could still be observed in epithelial cells and in differentiating fibers in the bow region but not in the mature lens fibers. FLAG-tagged exogenous lens connexins were also abundantly expressed by viral infection. The exogenous connexins were localized at the cell surfaces in junctional maculae and showed the same cell-type specific distribution as that of their endogenous connexin counterparts. An in vivo model system has been developed in the chick that provides opportunities to study the expression of wild-type and mutant proteins during lens differentiation. Expression of wild-type connexins has revealed that the characteristic distribution of the three different lens connexins is maintained even when expression is driven by a viral promoter.

  11. Contact lens-related infectious keratitis in Malaysia.

    Science.gov (United States)

    Reddy, S C; Tajunisah, I

    2008-01-01

    Fifty-six contact lens-related corneal ulcers (central in 32; hypopyon in 24 and stromal abscess in 6) were studied. Culture was positive in 78.9%. Corneal ulcers healed with intense antibiotic therapy in nearly all patients. Increased awareness of lens care/disinfection and frequent replacement of storage cases and solution, and early detection of pathogens and intensive appropriate antibiotic therapy are key points in management.

  12. A Novel Microwave Beam Steering Technique Using Plasma

    Science.gov (United States)

    Linardakis, Peter; Borg, Gerard G.; Harris, Jeffrey H.; Martin, Noel M.

    2002-10-01

    At frequencies above the plasma frequency, electromagnetic waves propagate through plasma with a wavelength longer than the free space wavelength. As a result, a plasma with a centrally peaked density profile can deflect rather than focus electromagnetic waves. We present a plasma device designed specifically to deflect a microwave beam as an alternative to conventional beam deflectors based on antenna arrays. A 22^rc deflection of Ka band microwave has been achieved using a laboratory plasma, with no detrimental effect on the beamwidth or side-lode level and structure. The use of a simple WKB model shows agreement and that the deflection can be increased with appropriate design. Results indicate the potential for increases in dynamic range, in power handling (for example from a gyrotron) and for the reduction of insertion losses over current beam steering systems. A ``plasma lens'' demonstrator device has also been designed to test practical performance aspects such as phase noise and to test optimization parameters.

  13. Impact of contact lens materials on multipurpose contact lens solution disinfection activity against Fusarium solani.

    Science.gov (United States)

    Clavet, Charles R; Chaput, Maria P; Silverman, Matthew D; Striplin, Megan; Shoff, Megan E; Lucas, Anne D; Hitchins, Victoria M; Eydelman, Malvina B

    2012-11-01

    To investigate the effects of eight different soft contact lenses on disinfection efficacy of a multipurpose solution (MPS) containing polyhexamethylene biguanide (PHMB) against Fusarium solani. Six silicone hydrogel lenses (galyfilcon A, senofilcon A, comfilcon A, enfilcon A, balafilcon A, and lotrifilcon B) and two conventional hydrogel lenses (polymacon and etafilcon A) were placed in polypropylene lens cases filled with MPS containing 0.0001% PHMB and soaked for 6, 12, 24, 72, and 168 hours. After each interval, depleted MPS from lens cases were removed and assayed for activity against F. solani according to International Organization for Standardization (ISO) 14729 stand-alone procedure. A portion was aliquoted for chemical analysis. Soaking etafilcon A, balafilcon A, and polymacon lenses for 6 hours reduced the concentration of PHMB in MPS by more than half the stated labeled concentration, with concentrations below the limit of detection for etafilcon A-depleted and balafilcon A-depleted solutions after 12 and 72 hours of soaking, respectively. Except for comfilcon A-depleted solutions, all others failed to consistently obtain one log reduction of F. solani. The solutions soaked with etafilcon A, balafilcon A, and polymacon lenses for 24 hours or more lost all or almost all fungicidal activity against F. solani. Over time, the disinfectant uptake by some lenses can significantly reduce the PHMB concentration and the fungicidal activity of the MPS against F. solani. Current ISO methodology does not address the reduction in microbiocidal efficacy when lenses are soaked in MPS. The ISO committee should consider adding "soaking experiments" to quantify the effect that contact lens materials have on the performance of MPSs.

  14. Adaptive neuro-fuzzy estimation of optimal lens system parameters

    Science.gov (United States)

    Petković, Dalibor; Pavlović, Nenad T.; Shamshirband, Shahaboddin; Mat Kiah, Miss Laiha; Badrul Anuar, Nor; Idna Idris, Mohd Yamani

    2014-04-01

    Due to the popularization of digital technology, the demand for high-quality digital products has become critical. The quantitative assessment of image quality is an important consideration in any type of imaging system. Therefore, developing a design that combines the requirements of good image quality is desirable. Lens system design represents a crucial factor for good image quality. Optimization procedure is the main part of the lens system design methodology. Lens system optimization is a complex non-linear optimization task, often with intricate physical constraints, for which there is no analytical solutions. Therefore lens system design provides ideal problems for intelligent optimization algorithms. There are many tools which can be used to measure optical performance. One very useful tool is the spot diagram. The spot diagram gives an indication of the image of a point object. In this paper, one optimization criterion for lens system, the spot size radius, is considered. This paper presents new lens optimization methods based on adaptive neuro-fuzzy inference strategy (ANFIS). This intelligent estimator is implemented using Matlab/Simulink and the performances are investigated.

  15. The Embedded Transparent Lens and Fermat's Least-Time Principle

    CERN Document Server

    Kantowski, Ronald; Dai, Xinyu

    2013-01-01

    We present a much simplified version of the embedded point mass lens theory and then make the obvious extension of this theory to any embedded transparent lens. Embedding a lens effectively reduces the gravitational potential's range, i.e., partially shields the lensing potential because the lens mass is made a contributor to the mean mass density of the universe and not simply superimposed upon it. This presentation results from simplifying previous formulations of the embedded point mass theory and is quite similar to the standard theory. We are then able to re-derive the simplified point mass theory by applying Fermat's least-time principle to the time-delay function. Even though rigorous derivations are only made for the point mass, the lens equation to the lowest order for any distributed lens, is obvious. We find from this simplified theory that embedding can introduce corrections at the few percent level in weak lensing shears caused by large clusters but only at large impacts. The potential part of th...

  16. Bio-inspired fluidic lens surgical camera for MIS.

    Science.gov (United States)

    Tsai, Frank S; Johnson, Daniel; Cho, Sung Hwan; Qiao, Wen; Arianpour, Ashkan; Lo, Yu-Hwa

    2009-01-01

    We report a new type of surgical camera that will greatly improve minimally invasive surgery (MIS). The key enabling technology for this camera is a unique type of lens-bio-inspired fluidic lens, which is a bio-mimetic lens that can change its curvature, just like the way human crystalline lens can accommodate. Because of its curvature changing capability, it is now possible to design a new regime of optical systems where auto-focusing and optical zoom can be performed without moving the lens positions, as is done in typical cameras. Hence, miniaturized imaging system with high functionality can be achieved with such technology. MIS is a surgical technique where small incisions are made on the abdominal wall as opposed to a large cut in open surgery. This type of surgery ensures faster patient recovery. The key tool for MIS is its surgical camera, or laparoscope. Traditional laparoscope is long and rigid and limits the field of view. To further advance MIS technology, we utilized bio-inspired fluidic lens to design a highly versatile imager that is small, can change its field of view or zoom optically, works in low light conditions, and varies the viewing angles. The surgical camera prototype is small (total track<17 mm), possesses 3X optical zoom, operates with light emitting diode (LED) lighting, among many other unique features.

  17. A Broadband Bessel Beam Launcher Using Metamaterial Lens.

    Science.gov (United States)

    Qi, Mei Qing; Tang, Wen Xuan; Cui, Tie Jun

    2015-06-30

    An approach of generating broadband Bessel beams is presented. The broadband Bessel beams are produced by a gradient index (GRIN) metamaterial lens illuminated by broadband waveguide antenna. The metamaterial lens is constructed with multi-layered structure and each layer is composed of GRIN metamaterials. The metamaterials are designed as dielectric plates printed with metallic patterns in the center region and drilled by air holes near the edge, which operate in wide band. The metamaterial lens serves as a convertor which transforms the spherical beams emitted from feed into conical beams. The conical beams form quasi-Bessel beams in the near-field region. The aperture diameter of the GRIN lens is much larger than the operating wavelength to guarantee the transformation. In principle, this kind of metamaterial lens can produce Bessel beams at arbitrary distance by designing the refractive-index distribution. To verify the approach, we have designed, fabricated and tested a metamaterial lens. Full-wave simulation and experiment results have proved that the generated Bessel beams can be maintained in distance larger than 1 meter within a ranging from 12 GHz to 18 GHz.

  18. Flat Lens Focusing Demonstrated With Left-Handed Metamaterial

    Science.gov (United States)

    Wilson, Jeffrey D.; Schwartz, Zachary D.; Chevalier, Christine T.; Downey, Alan N.; Vaden, Karl R.

    2004-01-01

    Left-handed metamaterials (LHM's) are a new media engineered to possess an effective negative index of refraction over a selected frequency range. This characteristic enables LHM's to exhibit physical properties never before observed. In particular, a negative index of refraction should cause electromagnetic radiation to refract or bend at a negative angle when entering an LHM, as shown in the figure above on the left. The figure on the right shows that this property could be used to bring radiation to a focus with a flat LHM lens. The advantage of a flat lens in comparison to a conventional curved lens is that the focal length could be varied simply by adjusting the distance between the lens and the electromagnetic wave source. In this in-house work, researchers at the NASA Glenn Research Center developed a computational model for LHM's with the three-dimensional electromagnetic commercial code Microwave Studio, constructed an LHM flat lens, and used it to experimentally demonstrate the reversed refraction and flat lens focusing of microwave radiation.

  19. Design of wide field and high resolution video lens

    Science.gov (United States)

    Xiao, Ze-xin; Zhan, Binzhou; Han, Haimei

    2009-11-01

    Online detecting is increasingly used in industrial process for the requirement of product quality improving. It is a trend that the "machine detecting" with "machine version + computer intelligence" as new method replaces traditional manual "eye observation". The essential of "machine detecting" is that image of object being collected with high resolution video lens on sensor panel of photoelectric (CCD ,CMOS) and detecting result being automatically gained by computer after the image saved and processed. "Machine detecting" is developing rapidly with the universal reception by enterprises because of its fine accurateness, high efficiency and the real time. Video lens is one of the important components of machine version system. Requirements of wide field and high resolution enlarged the complexity of video lens design. In this paper a design case used in visible light with field diameter Φ32mm, β=-0.25× and NA'=0.15. We give design parameters of the video lens which obtained with theoretically calculating and Oslo software optimization: MTF>0.3 in full field and 215lp/mm, distortion <0.05%.This lens has an excellent optic performance to match with 1.3 million pixels 1/2"CCD, and a high performance price ratio for being consist of only 7 single lens in the way of 5 units.

  20. Lens Systems for Sky Surveys and Space Surveillance

    Science.gov (United States)

    Ackermann, M.; McGraw, J.; Zimmer, P.

    2013-09-01

    Since the early days of astrophotography, lens systems have played a key role in capturing images of the night sky. The first images were attempted with visual-refractors. These were soon followed with color-corrected refractors and finally specially designed photo-refractors. Being telescopes, these instruments were of long-focus and imaged narrow fields of view. Simple photographic lenses were soon put into service to capture wide-field images. These lenses also had the advantage of requiring shorter exposure times than possible using large refractors. Eventually, lenses were specifically designed for astrophotography. With the introduction of the Schmidt-camera and related catadioptric systems, the popularity of astrograph lenses declined, but surprisingly, a few remained in use. Over the last 30 years, as small CCDs have displaced large photographic plates, lens systems have again found favor for their ability to image great swaths of sky in a relatively small and simple package. In this paper, we follow the development of lens-based astrograph systems from their beginnings through the current use of both commercial and custom lens systems for sky surveys and space surveillance. Some of the optical milestones discussed include the early Petzval-type portrait lenses, the Ross astrographic lens and the current generation of optics such as the commercial 200mm camera lens by Canon, and the Russian VT-53e in service with ISON.

  1. Wetting angles of rigid contact lens plastics: the effect of contact lens wear.

    Science.gov (United States)

    Poster, M G; Gelfer, D M; Fernandez, N M

    1986-06-01

    Several adapted rigid contact lens wearers were given duplicates of their present lenses made in different plastics. They were required to wear each material on each eye for a period of four hours. Both the average wetting angle and its range of values for each material was compiled. All lenses tended to give similar average wetting angles but ranges of angles for the PMMA/siloxanyl materials were greater than that for PMMA and GP IITM. Both values should be utilized when evaluating the wettability of a specific material.

  2. Dark energy with gravitational lens time delays

    CERN Document Server

    Treu, T; Cyr-Racine, F -Y; Fassnacht, C D; Keeton, C R; Linder, E V; Moustakas, L A; Bradac, M; Buckley-Geer, E; Collett, T; Courbin, F; Dobler, G; Finley, D A; Hjorth, J; Kochanek, C S; Komatsu, E; Koopmans, L V E; Meylan, G; Natarajan, P; Oguri, M; Suyu, S H; Tewes, M; Wong, K C; Zabludoff, A I; Zaritsky, D; Anguita, T; Brunner, R J; Cabanac, R; Falco, E E; Fritz, A; Seidel, G; Howell, D A; Giocoli, C; Jackson, N; Lopez, S; Metcalf, R B; Motta, V; Verdugo, T

    2013-01-01

    Strong lensing gravitational time delays are a powerful and cost effective probe of dark energy. Recent studies have shown that a single lens can provide a distance measurement with 6-7 % accuracy (including random and systematic uncertainties), provided sufficient data are available to determine the time delay and reconstruct the gravitational potential of the deflector. Gravitational-time delays are a low redshift (z~0-2) probe and thus allow one to break degeneracies in the interpretation of data from higher-redshift probes like the cosmic microwave background in terms of the dark energy equation of state. Current studies are limited by the size of the sample of known lensed quasars, but this situation is about to change. Even in this decade, wide field imaging surveys are likely to discover thousands of lensed quasars, enabling the targeted study of ~100 of these systems and resulting in substantial gains in the dark energy figure of merit. In the next decade, a further order of magnitude improvement will...

  3. The correction of electron lens aberrations

    Energy Technology Data Exchange (ETDEWEB)

    Hawkes, P.W., E-mail: peter.hawkes@cemes.fr

    2015-09-15

    The progress of electron lens aberration correction from about 1990 onwards is chronicled. Reasonably complete lists of publications on this and related topics are appended. A present for Max Haider and Ondrej Krivanek in the year of their 65th birthdays. By a happy coincidence, this review was completed in the year that both Max Haider and Ondrej Krivanek reached the age of 65. It is a pleasure to dedicate it to the two leading actors in the saga of aberration corrector design and construction. They would both wish to associate their colleagues with such a tribute but it is the names of Haider and Krivanek (not forgetting Joachim Zach) that will remain in the annals of electron optics, next to that of Harald Rose. I am proud to know that both regard me as a friend as well as a colleague. - Highlights: • Geometrical aberration correction. • Chromatic aberration correction. • 50 pm resolution. • High-resolution electron energy-loss spectroscopy. • Extensive bibliographies.

  4. Amoebicidal effects of contact lens disinfecting solutions.

    Science.gov (United States)

    Boost, Maureen V; Shi, Guang-Sen; Lai, Sindy; Cho, Pauline

    2012-01-01

    To compare the traditional manual hemacytometer method and an automated counter (Vi-cell) to enumerate and distinguish between viable and non-viable amoeba, and to determine the efficacies of contact lens (CL) disinfecting solutions against three species of Acanthamoeba. The efficacies in the presence of a bacterial food source and bovine serum albumin (BSA) were investigated. Four brands of multipurpose solutions and a hydrogen peroxide disinfecting system (Oxysept) for soft CLs, and four disinfecting solutions for Rigid Gas Permeable (RGP) lenses were tested against three species of Acanthamoeba. Page's amoebic saline was included as a negative control and standard solutions of disinfecting agents, 6% hydrogen peroxide and 0.5% chlorhexidine, as positive controls. The effects of the presence of Pseudomonas aeruginosa and BSA on effectiveness were assessed. None of the CL solutions tested achieved a 1-log reduction in viability of all three Acanthamoeba species within the manufacturer's recommended disinfection times. The presence of P. aeruginosa did not significantly affect disinfecting capacity of multipurpose solution solutions but reduced activity of RGP solutions and the hydrogen peroxide system. BSA reduced trophozoicidal activity of all solutions. Bland and Altman analysis showed good agreement between Vi-cell and hemacytometer. The Vi-Cell analyzer offers a simple and effective method of determining amoebicidal activity. Our results show that the CL solutions tested could not satisfactorily kill Acanthamoeba.

  5. Harm reduction through a social justice lens.

    Science.gov (United States)

    Pauly, Bernadette

    2008-02-01

    People who are street involved such as those experiencing homelessness and drug use face multiple inequities in health and access to health care. Morbidity and mortality are significantly increased among those who are street involved. Incorporation of a harm reduction philosophy in health care has the potential to shift the moral context of health care delivery and enhance access to health care services. However, harm reduction with a primary focus on reducing the harms of drug use fails focus on the harms associated with the context of drug use such as homelessness, violence and poverty. Ethical analysis of the underlying values of harm reduction and examination of different conceptions of justice are discussed as a basis for action that addresses a broad range of harms associated with drug use. Theories of distributive justice that focus primarily on the distribution of material goods are limited as theoretical frameworks for addressing the root causes of harm associated with drug use. Social justice, reconceptualised and interpreted through a critical lens as described by Iris Marion Young, is presented as a promising alternative ethical framework. A critical reinterpretation of social justice leads to insights that can illuminate structural inequities that contribute to the harms associated with the context of drug use. Such an approach provides promise as means of informing policy that aims to reduce a broad range of harms associated with drug use such as homelessness and poverty.

  6. Hemispherical projection lens for insect behavior analysis

    Science.gov (United States)

    Aikio, Mika; Takalo, Jouni; Lempeä, Mikko; Vähäsöyrinki, Mikko

    2010-05-01

    Virtual reality projection systems have been used formerly to study if mammals, including humans, are able to act in or understand virtual environments. Insects have been more difficult to study in such circumstances, one of the factors being their large, almost hemispherical field of view. Designing such a projection system that is capable of fulfilling the full field of vision of an insect is a challenging task. Normally, when designing a photographic objective, one of the goals is to minimize field curvature in order to provide sharp image through the whole sensor surface. However, because the image surface in this case is a sphere, flat field is not desirable and the design task becomes an opposite of a typical camera lens. Introducing field curvature becomes mandatory. We have designed and built a system with satisfactory image quality throughout the whole spherical surface with reasonable number of lenses as an add-on for common digital projectors. The manufactured system is able to project an image to a solid angle of 11.95 steradians, and when compared to the whole sphere which is represented with a solid angle of 4π steradians, approximately 5 % of the total sphere area is not illuminated.

  7. Plasma Antenna

    OpenAIRE

    N M Vijay

    2014-01-01

    The fundamental base of plasma antenna is the use of an ionized medium as a conductor. The plasma antenna is a radiofrequency antenna formed by a plasma columns, Filaments or sheets, which are excited by a surface wave. The relevance of this device is how rapidly it can be turned on and off, only applying an electrical pulse. Besides its wide carrier frequency, the great directivity and controllable antenna shape. Otherwise a disadvantage is that it needs energy to be ionized....

  8. Plasma physics

    CERN Document Server

    Drummond, James E

    2013-01-01

    A historic snapshot of the field of plasma physics, this fifty-year-old volume offers an edited collection of papers by pioneering experts in the field. In addition to assisting students in their understanding of the foundations of classical plasma physics, it provides a source of historic context for modern physicists. Highly successful upon its initial publication, this book was the standard text on plasma physics throughout the 1960s and 70s.Hailed by Science magazine as a ""well executed venture,"" the three-part treatment ranges from basic plasma theory to magnetohydrodynamics and microwa

  9. Development of an accommodating intra-ocular lens - In vitro prevention of re-growth of pig and rabbit lens capsule epithelial cells

    NARCIS (Netherlands)

    van Kooten, Theo G.; Koopmans, Steven; Terwee, Thom; Norrby, Sverker; Hooymans, J. M. M.; Busscher, Henk J.

    2006-01-01

    Cataract surgery is routinely performed to replace the clouded lens by a rigid polymeric intra-ocular lens unable to accommodate. By implanting a silicone gel into an intact capsular bag the accommodating properties of the natural lens can be maintained or enhanced. The implantation success of accom

  10. Long-term results of clear lens extraction combined with piggyback intraocular lens implantation to correct high hyperopia

    Directory of Open Access Journals (Sweden)

    Xia Hua

    2013-10-01

    Full Text Available AIM: To assess the refractive outcome of clear lensectomy combined with piggyback intraocular lens implantation in highly hyperopic patients.METHODS: This case review included 19 eyes of 10 patients with high hyperopia and axial length less than 21mm. Intraocular lens power was calculated for emmetropia using the Holladay II formula in 17 eyes, and SRK/T formula in 2 eyes following clear lens extraction and piggyback intraocular lens implantation. Patients were examined periodically over 24 months for visual acuity and spherical equivalent (SE.RESULTS: The mean postoperative SE at 24 months was 0.20±1.39D (range, -3.00 to 2.50D, better than preoperative 9.81±2.62D (range, +6.00 to +14.50D (PPP=0.34. Twelve eyes maintained and 1 gained 1 or more Snellen line of BCVA, 4 eyes lost 1 line, and 2 eyes lost 2 lines at 24 postoperative months. Twelve eyes best-corrected near visual acuity (BCNVA achieved J1 at postoperative 24 months compared to preoperative 7 eyes and the other 7 eyes better than J3.CONCLUSION: Clear lens extraction combined piggyback intraocular lens implantation appears to be an effective procedure to correct high hyperopia but mild overcorrection and intralenticular opacification may require secondary procedure.

  11. A role for smoothened during murine lens and cornea development.

    Directory of Open Access Journals (Sweden)

    Janet J Y Choi

    Full Text Available Various studies suggest that Hedgehog (Hh signalling plays roles in human and zebrafish ocular development. Recent studies (Kerr et al., Invest Ophthalmol Vis Sci. 2012; 53, 3316-30 showed that conditionally activating Hh signals promotes murine lens epithelial cell proliferation and disrupts fibre differentiation. In this study we examined the expression of the Hh pathway and the requirement for the Smoothened gene in murine lens development. Expression of Hh pathway components in developing lens was examined by RT-PCR, immunofluorescence and in situ hybridisation. The requirement of Smo in lens development was determined by conditional loss-of-function mutations, using LeCre and MLR10 Cre transgenic mice. The phenotype of mutant mice was examined by immunofluorescence for various markers of cell cycle, lens and cornea differentiation. Hh pathway components (Ptch1, Smo, Gli2, Gli3 were detected in lens epithelium from E12.5. Gli2 was particularly localised to mitotic nuclei and, at E13.5, Gli3 exhibited a shift from cytosol to nucleus, suggesting distinct roles for these transcription factors. Conditional deletion of Smo, from ∼E12.5 (MLR10 Cre did not affect ocular development, whereas deletion from ∼E9.5 (LeCre resulted in lens and corneal defects from E14.5. Mutant lenses were smaller and showed normal expression of p57Kip2, c-Maf, E-cadherin and Pax6, reduced expression of FoxE3 and Ptch1 and decreased nuclear Hes1. There was normal G1-S phase but decreased G2-M phase transition at E16.5 and epithelial cell death from E14.5-E16.5. Mutant corneas were thicker due to aberrant migration of Nrp2+ cells from the extraocular mesenchyme, resulting in delayed corneal endothelial but normal epithelial differentiation. These results indicate the Hh pathway is required during a discrete period (E9.5-E12.5 in lens development to regulate lens epithelial cell proliferation, survival and FoxE3 expression. Defective corneal development occurs

  12. Negative refractive perfect lens vs Spherical geodesic lens. Perfect Imaging comparative analysis

    CERN Document Server

    Gonzalez, Juan C; Minano, Juan C; Grabovickic, Dejan

    2012-01-01

    Negative Refractive Lens (NRL) has shown that an optical system can produce images with details below the classic Abbe diffraction limit. This optical system transmits the electric field, emitted by the object surface, towards the image surface producing the same field distribution in both surfaces. In particular, a Dirac delta electric field in the object surface is focused without diffraction limit to the Dirac delta electric field in the image surface. The Maxwell Fish Eye lens (MFE) and the Spherical Geodesic Waveguide (SGW) have been claimed to break the diffraction limit using positive refraction with a different meaning. In these cases, it has been considered the power transmission from a point source to a point receptor, which falls drastically when the receptor is displaced from the focus by a distance much smaller than the wavelength. Although these systems can detect displacements up to Wavelength/500, they cannot be compared to the NRL, since the concept of the object and image surface is not esta...

  13. Evaluation of resources for contact lens practice in private contact lens clinics of Muscat, Oman

    Directory of Open Access Journals (Sweden)

    Rajiv Khandekar

    2009-01-01

    Materials and Methods: This study was conducted between May and July 2006. A team of optometrists and health inspectors visited clinics and collected information about the infrastructure, available human resources, and materials used in the CL practice. We used a pre-tested close-ended questionnaire to collect responses of the practitioners and observations of the field staff. Statistical Method: Univariate parametric type of analysis. Results: The team visited 67 CL clinics and interviewed 75 CL practitioners. Proper hand washing facility was available at 61 clinics. Thirty-nine practitioners had> 10 years of experience in dispensing contact lenses. Only 13 clinics had a bio-microscope. None of the clinics had legal documents signed by both providers and end users of the contact lens. Conclusions: Contact lens has received less attention in areas outside the developed world. The CL practice in the private sectors of Oman needs to be strengthened. Minimum standards, standard operating procedures for CL practice, and its periodic supervision would be useful.

  14. Evaluating the cytotoxicity of contact lens multi-purpose solutions in an in vitro lens system

    Directory of Open Access Journals (Sweden)

    O. Matthew Oriowo

    2009-12-01

    Full Text Available Purpose: To investigate the relative cytotoxic effects of contact lens multipurpose solutions on cultured crystalline lenses.Methods: A comparison of the fluorescence emission levels of cultured bovine lenses as affected by three hour experimental exposure to three contact lens multipurpose solutions (COMPLETE Moisture Plus, AMO; OPTI-FREE Express, Alcon; and ReNu MultiPlus, Bausch & Lomb was carried out. The pre- and post-exposure fluorescence levels of the lenses were obtained and values were compared to baseline and control measurements.Results: The solutions yielded varying degrees of cytotoxicity, demonstrating significant (p < 0.01 reversible reduction of cellular viability levels of the cultured crystalline lenses as revealed by the degree of fluorescence emissions in the following order (OPTI-FREE Express > ReNu MultiPlus > COMPLETE MoisturePlus multi-purpose solutionsConclusions: The results show that OPTI-FREE Express and ReNu MultiPlus solutions exhibited more cytotoxic effect compared to COMPLETE MoisturePlus solution. The findings support reportsfrom previous clinical and laboratory studies. These results suggest that the in vitro approach herein presented would be a valuable system for relatively inexpensive and repeatable laboratory investigations of the possible ocular surface reactions of ophthal-mic solutions, cosmetics and pharmaceuticals at pre- and during commercial phases. 

  15. [Surface modification of poly methyl methacrylate intraocular lens by alpha-allyl glucoside].

    Science.gov (United States)

    Qu, Chao; Yao, Ke; Kou, Ruiqiang; Xu, Zhikang

    2004-02-01

    A method for improving the biocompatibility of the intraocular lens (IOL) and reducing the cell attachment was adopted in this study. The alpha-Allyl glucoside was used for the surface modification of the poly methyl methacrylate (PMMA) IOL by way of plasma-induced in situ polymerization. The surfaces of the control and treatment IOLs were characterized by contact angle estimation and ESCA techniques. The resolution, diopter and anti-fatigue of loops were determined by physical and optical methods. Cell attachment on the surfaces was examined by light microscopy. The results indicated that all of the treatment groups had excellent physical and optical properties. The modification with the use of alpha-Allyl glucoside could improve the hydrophilicity of the anterior surface of the PMMA IOLs and reduce the cell attachment.

  16. Reverse chromatic aberration and its numerical optimization in a metamaterial lens.

    Science.gov (United States)

    Capecchi, William J; Behdad, Nader; Volpe, Francesco A

    2012-04-09

    In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natural "ordinary" chromatic aberration of other components in an optical system. More generally, optimized chromatic aberration will allow for simultaneous focusing of several objects located at different distances and emitting or reflecting at different frequencies.

  17. Slit-scanning microscope with a high-NA objective lens for analysis of synaptic function

    Science.gov (United States)

    Sakurai, Takashi; Wakazono, Yoshihiko; Yamamoto, Seiji; Terakawa, Susumu

    2004-07-01

    By employing the total internal reflection fluorescence (TIRF) microscope with an ultra high NA (1.65) objective lens, we demonstrated detailed dynamics of exocytosis in various types of secretory vesicles. However, the TIRF microscopy could be applied to observations only on the plasma membrane and its immediate vicinity. To observe the vesicles in the deeper region of cytoplasm, we modified the TIRF optics to project a slit beam thinner than 1 μm in width to the cell. The slit beam illumination spotted single secretory vesicles inside the cell better and their movement and exocytosis easier. By scanning the slit beam, a fluorescence microscopy was possible at a high signal-to-noise ratio useful for measurement and analysis of single exocytosis in neurons and endocrine cells.

  18. Reverse Chromatic Aberration and its Numerical Optimization in a Metamaterial Lens

    CERN Document Server

    Capecchi, W J; Volpe, F A; 10.1364/OE.20.008761

    2013-01-01

    In planar metamaterial lenses, the focal point moves with the frequency. Here it is shown numerically that this movement can be controlled by properly engineering the dimensions of the metamaterial-based phase shifters that constitute the lens. In particular, such lenses can be designed to exhibit unusual chromatic aberration with the focal length increasing, rather than decreasing, with the frequency. It is proposed that such an artificial "reverse" chromatic aberration may optimize the transverse resolution of millimeter wave diagnostics of plasmas and be useful in compensating for the natural "ordinary" chromatic aberration of other components in an optical system. More generally, optimized chromatic aberration will allow to simultaneously focus on several objects located at different distances and emitting or reflecting at different frequencies.

  19. Monitoring the eye lens: which dose quantity is adequate?

    Energy Technology Data Exchange (ETDEWEB)

    Behrens, R [Physikalisch-Technische Bundesanstalt, Bundesallee 100, D-38116 Braunschweig (Germany); Dietze, G, E-mail: rolf.behrens@ptb.d [Paracelsusstrasse 7, D-38116 Braunschweig (Germany)

    2010-07-21

    Recent epidemiological studies suggest a rather low dose threshold (below 0.5 Gy) for the induction of a cataract of the eye lens. Some other studies even assume that there is no threshold at all. Therefore, protection measures have to be optimized and current dose limits for the eye lens may be reduced in the future. The question of which personal dose equivalent quantity is appropriate for monitoring the dose to the eye lens arises from this situation. While in many countries dosemeters calibrated in terms of the dose equivalent quantity H{sub p}(0.07) have been seen as being adequate for monitoring the dose to the eye lens, this might be questionable in the case of reduced dose limits and, thus, it may become necessary to use the dose equivalent quantity H{sub p}(3) for this purpose. To discuss this question, the dose conversion coefficients for the equivalent dose of the eye lens (in the following eye lens dose) were determined for realistic photon and beta radiation fields and compared with the values of the corresponding conversion coefficients for the different operational quantities. The values obtained lead to the following conclusions: in radiation fields where most of the dose comes from photons, especially x-rays, it is appropriate to use dosemeters calibrated in terms of H{sub p}(0.07) on a slab phantom, while in other radiation fields (dominated by beta radiation or unknown contributions of photon and beta radiation) dosemeters calibrated in terms of H{sub p}(3) on a slab phantom should be used. As an alternative, dosemeters calibrated in terms of H{sub p}(0.07) on a slab phantom could also be used; however, in radiation fields containing beta radiation with the end point energy near 1 MeV, an overestimation of the eye lens dose by up to a factor of 550 is possible.

  20. Chitah: Strong-gravitational-lens hunter in imaging surveys

    Energy Technology Data Exchange (ETDEWEB)

    Chan, James H. H.; Suyu, Sherry H.; Chiueh, Tzihong; More, Anupreeta; Marshall, Philip J.; Coupon, Jean; Oguri, Masamune; Price, Paul

    2015-07-07

    Strong gravitationally lensed quasars provide powerful means to study galaxy evolution and cosmology. Current and upcoming imaging surveys will contain thousands of new lensed quasars, augmenting the existing sample by at least two orders of magnitude. To find such lens systems, we built a robot, Chitah, that hunts for lensed quasars by modeling the configuration of the multiple quasar images. Specifically, given an image of an object that might be a lensed quasar, Chitah first disentangles the light from the supposed lens galaxy and the light from the multiple quasar images based on color information. A simple rule is designed to categorize the given object as a potential four-image (quad) or two-image (double) lensed quasar system. The configuration of the identified quasar images is subsequently modeled to classify whether the object is a lensed quasar system. We test the performance of Chitah using simulated lens systems based on the Canada–France–Hawaii Telescope Legacy Survey. For bright quads with large image separations (with Einstein radius ${r}_{\\mathrm{ein}}\\gt 1\\buildrel{\\prime\\prime}\\over{.} 1$) simulated using Gaussian point-spread functions, a high true-positive rate (TPR) of $\\sim 90\\%$ and a low false-positive rate of $\\sim 3\\%$ show that this is a promising approach to search for new lens systems. We obtain high TPR for lens systems with ${r}_{\\mathrm{ein}}\\gtrsim 0\\buildrel{\\prime\\prime}\\over{.} 5$, so the performance of Chitah is set by the seeing. We further feed a known gravitational lens system, COSMOS 5921+0638, to Chitah, and demonstrate that Chitah is able to classify this real gravitational lens system successfully. Our newly built Chitah is omnivorous and can hunt in any ground-based imaging surveys.

  1. Changes in the Eye Microbiota Associated with Contact Lens Wearing.

    Science.gov (United States)

    Shin, Hakdong; Price, Kenneth; Albert, Luong; Dodick, Jack; Park, Lisa; Dominguez-Bello, Maria Gloria

    2016-03-22

    Wearing contact lenses has been identified as a risk factor for the development of eye conditions such as giant papillary conjunctivitis and keratitis. We hypothesized that wearing contact lenses is associated with changes in the ocular microbiota. We compared the bacterial communities of the conjunctiva and skin under the eye from 58 subjects and analyzed samples from 20 subjects (9 lens wearers and 11 non-lens wearers) taken at 3 time points using a 16S rRNA gene-based sequencing technique (V4 region; Illumina MiSeq). We found that using anesthetic eye drops before sampling decreases the detected ocular microbiota diversity. Compared to those from non-lens wearers, dry conjunctival swabs from lens wearers had more variable and skin-like bacterial community structures (UniFrac;P value = 3.0). The results indicate that wearing contact lenses alters the microbial structure of the ocular conjunctiva, making it more similar to that of the skin microbiota. Further research is needed to determine whether the microbiome structure provides less protection from ocular infections. As in other body sites (i.e., the gut, skin, and mouth), the eye has a normal community of bacteria which are expected to confer resistance that provides protection from invaders. However, the eye microbiome has been largely neglected and is relevant to eye health and understanding eye diseases and to discovery of its functions. This report of a baseline study shows differences in the eye microbiome of contact lens wearers in relation to those of non-lens wearers and has the potential to help future studies explore novel insights into a possible role of the microbiome in the increased risk for eye infections in contact lens wearers. Copyright © 2016 Shin et al.

  2. Novel fabrication technique of hybrid structure lens array for 3D images

    Science.gov (United States)

    Lee, Junsik; Kim, Junoh; Kim, Cheoljoong; Shin, Dooseub; Koo, Gyohyun; Won, Yong Hyub

    2016-03-01

    Tunable liquid lens arrays can produce three dimensional images by using electrowetting principle that alters surface tensions by applying voltage. This method has advantages of fast response time and low power consumption. However, it is challenging to fabricate a high fill factor liquid lens array and operate three dimensional images which demand high diopter. This study describes a hybrid structure lens array which has not only a liquid lens array but a solid lens array. A concave-shape lens array is unavoidable when using only the liquid lens array and some voltages are needed to make the lens flat. By placing the solid lens array on the liquid lens array, initial diopter can be positive. To fabricate the hybrid structure lens array, a conventional lithographic process in semiconductor manufacturing is needed. A negative photoresist SU-8 was used as chamber master molds. PDMS and UV adhesive replica molding are done sequentially. Two immiscible liquids, DI water and dodecane, are injected in the fabricated chamber, followed by sealing. The fabricated structure has a 20 by 20 pattern of cylindrical shaped circle array and the aperture size of each lens is 1mm. The thickness of the overall hybrid structure is about 2.8mm. Hybrid structure lens array has many advantages. Solid lens array has almost 100% fill factor and allow high efficiency. Diopter can be increased by more than 200 and negative diopter can be shifted to the positive region. This experiment showed several properties of the hybrid structure and demonstrated its superiority.

  3. The Lens Staring You in the Face

    Science.gov (United States)

    vachon, R. W.

    2012-12-01

    When you are embedded in the minutia of a science, you and your collaborators don't need to be convinced that there are benefits to investigating your precise science. You are intrinsically invested. In fact, we spend so much time around each other that we create our own language. So many acronyms that we come to take for granted and topic relevant words, like "fractionate", are not common parlance. This is the case with any specialization, but when it becomes second nature to communicate your work with these norms, transmission breaks down, people tune out, and some audiences become frustrated. Media can cushion this separation, but what do you do when you are the one in front of the camera, and clarity and impact of a concept rests on your shoulders? Just as writing a peer review paper is an acquired skill, so is communicating to the ones who pay many of our salaries, taxpayers. Over the past three years I have worked intimately with publishers, networks and university outreach programs to refine my approach to communicating scientific knowledge to particular audiences. The road has positioned me as interviewee, motivational speaker for science, technology, engineering and math (STEM) in middle and high schools, and educational video series host. Media has their own standards. Personality and enthusiasm may be just as important as the journal into which your findings were published. This presentation will emphasize the audience-adjustable tenants that have stood the test of time to result in effective video communication. Additionally, preparation for and execution of different roles in front of the lens will be discussed.Communicating concepts on video

  4. New trends in intraocular lens imaging

    Science.gov (United States)

    Millán, María S.; Alba-Bueno, Francisco; Vega, Fidel

    2011-08-01

    As a result of modern technological advances, cataract surgery can be seen as not only a rehabilitative operation, but a customized procedure to compensate for important sources of image degradation in the visual system of a patient, such as defocus and some aberrations. With the development of new materials, instruments and surgical techniques in ophthalmology, great progress has been achieved in the imaging capability of a pseudophakic eye implanted with an intraocular lens (IOL). From the very beginning, optical design has played an essential role in this progress. New IOL designs need, on the one hand, theoretical eye models able to predict optical imaging performance and on the other hand, testing methods, verification through in vitro and in vivo measurements, and clinical validation. The implant of an IOL requires a precise biometry of the eye, a prior calculation from physiological data, and an accurate position inside the eye. Otherwise, the effects of IOL calculation errors or misplacements degrade the image very quickly. The incorporation of wavefront aberrometry into clinical ophthalmology practice has motivated new designs of IOLs to compensate for high order aberrations in some extent. Thus, for instance, IOLs with an aspheric design have the potential to improve optical performance and contrast sensitivity by reducing the positive spherical aberration of human cornea. Monofocal IOLs cause a complete loss of accommodation that requires further correction for either distance or near vision. Multifocal IOLs address this limitation using the principle of simultaneous vision. Some multifocal IOLs include a diffractive zone that covers the aperture in part or totally. Reduced image contrast and undesired visual phenomena, such as halos and glare, have been associated to the performance of multifocal IOLs. Based on a different principle, accommodating IOLs rely on the effort of the ciliary body to increase the effective power of the optical system of the

  5. LensPerfect Analysis of Abell 1689

    Science.gov (United States)

    Coe, Dan A.

    2007-12-01

    I present the first massmap to perfectly reproduce the position of every gravitationally-lensed multiply-imaged galaxy detected to date in ACS images of Abell 1689. This massmap was obtained using a powerful new technique made possible by a recent advance in the field of Mathematics. It is the highest resolution assumption-free Dark Matter massmap to date, with the resolution being limited only by the number of multiple images detected. We detect 8 new multiple image systems and identify multiple knots in individual galaxies to constrain a grand total of 168 knots within 135 multiple images of 42 galaxies. No assumptions are made about mass tracing light, and yet the brightest visible structures in A1689 are reproduced in our massmap, a few with intriguing positional offsets. Our massmap probes radii smaller than that resolvable in current Dark Matter simulations of galaxy clusters. And at these radii, we observe slight deviations from the NFW and Sersic profiles which describe simulated Dark Matter halos so well. While we have demonstrated that our method is able to recover a known input massmap (to limited resolution), further tests are necessary to determine the uncertainties of our mass profile and positions of massive subclumps. I compile the latest weak lensing data from ACS, Subaru, and CFHT, and attempt to fit a single profile, either NFW or Sersic, to both the observed weak and strong lensing. I confirm the finding of most previous authors, that no single profile fits extremely well to both simultaneously. Slight deviations are revealed, with the best fits slightly over-predicting the mass profile at both large and small radius. Our easy-to-use software, called LensPerfect, will be made available soon. This research was supported by the European Commission Marie Curie International Reintegration Grant 017288-BPZ and the PNAYA grant AYA2005-09413-C02.

  6. Binocular lens treatment in tree shrews: Effect of age and comparison of plus lens wear with recovery from minus lens-induced myopia.

    Science.gov (United States)

    Siegwart, John T; Norton, Thomas T

    2010-11-01

    We examined normal emmetropization and the refractive responses to binocular plus or minus lenses in young (late infantile) and juvenile tree shrews. In addition, recovery from lens-induced myopia was compared with the response to a similar amount of myopia produced with plus lenses in age-matched juvenile animals. Normal emmetropization was examined with daily noncycloplegic autorefractor measures from 11 days after natural eye-opening (days of visual experience [VE]) when the eyes were in the infantile, rapid growth phase and their refractions were substantially hyperopic, to 35 days of VE when the eyes had entered the juvenile, slower growth phase and the refractions were near emmetropia. Starting at 11 days of VE, two groups of young tree shrews wore binocular +4 D lenses (n=6) or -5 D lenses (n=5). Starting at 24 days of VE, four groups of juvenile tree shrews (n=5 each) wore binocular +3 D, +5 D, -3 D, or -5 D lenses. Non-cycloplegic measures of refractive state were made frequently while the animals wore the assigned lenses. The refractive response of the juvenile plus-lens wearing animals was compared with the refractive recovery of an age-matched group of animals (n=5) that were myopic after wearing a -5 D lens from 11 to 24 days of VE. In normal tree shrews, refractions (corrected for the small eye artifact) declined rapidly from (mean±SEM) 6.6±0.6 D of hyperopia at 11 VE to 1.4±0.2 D at 24 VE and 0.8±0.4 D at 35 VE. Plus 4 D lens treatment applied at 11 days of VE initially corrected or over-corrected the young animals' hyperopia and produced a compensatory response in most animals; the eyes became nearly emmetropic while wearing the +4 D lenses. In contrast, plus-lens treatment starting at 24 days of VE initially made the juvenile eyes myopic (over-correction) and, on average, was less effective. The response ranged from no change in refractive state (eye continued to experience myopia) to full compensation (emmetropic with the lens in place

  7. Modified technique of endocapsular lens aspiration for severely subluxated lenses.

    Science.gov (United States)

    Khokhar, S; Aron, N; Yadav, N; Pillay, G; Agarwal, E

    2017-08-11

    PurposeSeverely subluxated crystalline lenses pose a difficult situation to anterior segment surgeons and can only be managed surgically by removal of the lens as well as the capsular bag. Several techniques have been described in literature for the management of such cases. We describe a modified technique of endocapsular lens aspiration by the limbal route for lens extraction through small incisions on the cornea.Patients and methodsThirty-two eyes of 16 consecutive patients with severely subluxated crystalline lenses were recruited in the study. All eyes underwent a modified technique of lens aspiration within the capsular bag using a single instrument, vitrectomy cutter, and irrigation cannula, followed by sacrificing of the capsular bag. The patients were either left aphakic or implanted with an open loop anterior chamber intraocular lens (ACIOL Kelman Multiflex) and prospectively followed up for a period of 3 months.ResultsThe mean age of the patients was 9 years 3 months±3 years (range 5-15 yrs). All eyes underwent complete lens aspiration within the capsular bag with no dislocation of the lens matter. ACIOL was inserted in 22 eyes (68.7%) and 10 eyes (31.2%) were left aphakic. All the surgeries were uneventful. The mean best corrected visual acuity (BCVA) at 3 months post surgery was 0.47±0.11 logMAR which was significantly better than pre-operative BCVA (P=0.001). The percentage endothelial cell loss at 3 months was 7.1%. There was no evidence of glaucoma, corneal decompensation, or retinal detachment. The astigmatism which increased from 1.45D±086 preoperatively to 3.76D±2.02 1 week post-operatively due to sutures reduced to 1.97D±0.81 post suture removal at 3 months.ConclusionThe modified technique of endocapsular lens aspiration proves to be a simple and effective method of removal of the lens-capsular bag complex in severely subluxated lenses.Eye advance online publication, 11 August 2017; doi:10.1038/eye.2017.160.

  8. Non-thermal electromagnetic radiation damage to lens epithelium.

    Science.gov (United States)

    Bormusov, Elvira; P Andley, Usha; Sharon, Naomi; Schächter, Levi; Lahav, Assaf; Dovrat, Ahuva

    2008-05-21

    High frequency microwave electromagnetic radiation from mobile phones and other modern devices has the potential to damage eye tissues, but its effect on the lens epithelium is unknown at present. The objective of this study was to investigate the non-thermal effects of high frequency microwave electromagnetic radiation (1.1GHz, 2.22 mW) on the eye lens epithelium in situ. Bovine lenses were incubated in organ culture at 35°C for 10-15 days. A novel computer-controlled microwave source was used to investigate the effects of microwave radiation on the lenses. 58 lenses were used in this study. The lenses were divided into four groups: (1) Control lenses incubated in organ culture for 10 to15 days. (2) Electromagnetic radiation exposure group treated with 1.1 GHz, 2.22 mW microwave radiation for 90 cycles of 50 minutes irradiation followed by 10 minutes pause and cultured up to 10 days. (3) Electromagnetic radiation exposure group treated as group 2 with 192 cycles of radiation and cultured for 15 days. (4) Lenses exposed to 39.5°C for 2 hours 3 times with 24 hours interval after each treatment beginning on the second day of the culture and cultured for 11 days. During the culture period, lens optical quality was followed daily by a computer-operated scanning laser beam. At the end of the culture period, control and treated lenses were analyzed morphologically and by assessment of the lens epithelial ATPase activity. Exposure to 1.1 GHz, 2.22 mW microwaves caused a reversible decrease in lens optical quality accompanied by irreversible morphological and biochemical damage to the lens epithelial cell layer. The effect of the electromagnetic radiation on the lens epithelium was remarkably different from those of conductive heat. The results of this investigation showed that electromagnetic fields from microwave radiation have a negative impact on the eye lens. The lens damage by electromagnetic fields was distinctly different from that caused by conductive heat.

  9. A design study of a magnifying magnetic lens for proton radiography

    Institute of Scientific and Technical Information of China (English)

    YANG Guo-Jun; ZHANG Zhuo; WEI Tao; HE Xiao-Zhong; LONG Ji-Dong; SHI Jin-Shui; ZHANG Kai-Zhi

    2012-01-01

    Magnifying magnetic lenses can be used in high-energy proton microscopes.The -I lens suggested by Zumbro is analyzed in this paper,and a new type of magnetic lens called a lengthened lens is introduced.Theoretical analysis shows that the lengthened lens can form a magnifying lens,and at the same time the main advantages of a Zumbro lens are inherited.Using the My-BOC beam dynamics code,an example of the design is shown.The results show that the method of designing magnifying magnetic lenses is effective.

  10. Contact lens care solution killing efficacy against Acanthamoeba castellanii by in vitro testing and live-imaging.

    Science.gov (United States)

    Kolar, Satya Sree N; Manarang, Joseph C; Burns, Alan R; Miller, William L; McDermott, Alison M; Bergmanson, Jan P G

    2015-12-01

    In the past decade there has been an increased incidence of Acanthamoeba keratitis, particularly in contact lens wearers. The aim of this study was to utilize in vitro killing assays and to establish a novel, time-lapse, live-cell imaging methodology to demonstrate the efficacy of contact lens care solutions in eradicating Acanthamoeba castellanii (A. castellanii) trophozoites and cysts. Standard qualitative and quantitative in vitro assays were performed along with novel time-lapse imaging coupled with fluorescent dye staining that signals cell death. Quantitative data obtained demonstrated that 3% non-ophthalmic hydrogen peroxide demonstrated the highest percent killing at 87.4% corresponding to a 4.4 log kill. The other contact lens care solutions which showed a 72.9 to 29.2% killing which was consistent with 4.3-2.8 log reduction in trophozoite viability. Both analytical approaches revealed that polyquaternium/PHMB-based was the least efficacious in terms of trophicidal activity. The cysticidal activity of the solutions was much less than activity against trophozoites and frequently was not detected. Live-imaging provided a novel visual endpoint for characterizing the trophocidal activity of the care solutions. All solutions caused rapid rounding or pseudocyst formation of the trophozoites, reduced motility and the appearance of different morphotypes. Polyquaternium/alexidine-based and peroxide-based lens care system induced the most visible damage indicated by significant accumulation of debris from ruptured cells. Polyquaternium/PHMB-based was the least effective showing rounding of the cells but minimal death. These observations are in keeping with care solution biocides having prominent activity at the plasma membrane of Acanthamoeba.

  11. Far-field pattern analysis of extended-hemispherical-lens/objective-lens antenna system at millimeter wavelengths

    Science.gov (United States)

    Dou, Wenbin; Sun, Zhong Liang; Zeng, G.

    1998-11-01

    integrated antennas have the advantages of low cost and can be readily mass produced using standard IC fabrication processes. However, integrated antennas suffer from the surface wave effect at millimeter waves. One of the ways to avoid this problem is to integrate the antennas on a dielectric lens. This structure does not support surface-waves and tend to radiate most of their power into the dielectric side making the pattern unidirectional on high dielectric constant lenses. The dielectric lens also provides mechanical rigidity and thermal stability. There are various dielectric lenses which can be used for receiver application. Among them the extended hemispherical lens is very practical, since it can synthesize other lenses such as hemispherical, hyperhemispherical, or ellipsoidal simply by varying the extension length behind the hemispherical position. In reference five, investigation on such antenna/lens system is presented. In reference 6, slot- ring antennas on dielectric lens is investigated. In many applications the extended hemispherical lens/objective lens antenna system is more attractive, because it can provide higher gain and may be used in imaging system. On the other hand, monopulse direction-finding techniques are currently the most accurate and rapid method for locating a target electronically. This antenna system can also be used as monopulse antenna. However, the treatments on such antenna system are not presented yet. In this paper, the radiation pattern of the antenna system fed by double-slot antenna are computed using ray-tracing and diffraction integration methods. Although the double-slot antenna is used as feed antenna, other antenna such as slot-ring, bow-tie antenna can be used too.

  12. Comparison of visual outcomes after implantation of diffractive trifocal toric intraocular lens and a diffractive apodized bifocal toric intraocular lens

    Science.gov (United States)

    Gundersen, Kjell Gunnar; Potvin, Rick

    2016-01-01

    Purpose The aim of this study was to compare a new diffractive trifocal toric lens with an apodized diffractive bifocal toric lens in terms of refractive and visual acuity (VA) outcomes, including low-contrast VA (LCVA), as well as the patient’s visual function 3 months after implantation. Patients and methods This is a randomized prospective study involving bilateral implantation of a trifocal toric or a bifocal toric lens. At 3 months postoperatively, the subject’s vision was tested both uncorrected and with his/her best distance correction at: distance (4 m), intermediate (63 cm), and near (40 cm). Binocular defocus curves were measured with no correction and with the subject’s best distance correction in place. Quality of vision was measured using the National Eye Institute Visual Function Questionnaire. Results A total of 22 patients were enrolled (eleven in each group). There was no statistically significant difference in the absolute change in measured rotation between 1 month and 3 months postoperatively between the two intraocular lens (IOL) groups (P=0.98). At 3 months, the postoperative refraction and distance VA by eye were similar between groups. There was no statistically significant difference in the measured LCVA between groups (P=0.39). The defocus curve showed that at 67 cm, the trifocal toric lens had statistically significantly better VA when compared to the bifocal toric lens. There were no statistically significant differences by group for any of the National Eye Institute Visual Function Questionnaire scores (P>0.26 in all cases). Conclusion The trifocal toric IOL improved the intermediate vision without negatively impacting visual function and distance, near, or low-contrast VA when compared to a bifocal toric IOL. The toric component of the trifocal lens effectively reduced astigmatism and provided good rotational stability. PMID:27051269

  13. Determination of dideoxyosone precursors of AGEs in human lens proteins.

    Science.gov (United States)

    Linetsky, Mikhail; Kaid Johar, S R; Meltretter, Jasmin; Padmanabha, Smitha; Parmar, Trilok; Vasavada, Abhay R; Pischetsrieder, Monika; Nagaraj, Ram H

    2011-10-01

    Dideoxyosones (DDOs) are intermediates in the synthesis of advanced glycation endproducts (AGEs), such as pentosidine and glucosepane. Although the formation of pentosidine and glucosepane in the human lens has been firmly established, the formation of DDOs has not been demonstrated. The aim of this study was to develop a reliable method to detect DDOs in lens proteins. A specific DDO trapping agent, biotinyl-diaminobenzene (3,4-diamino-N-(3-[5-(2-oxohexahydro-1H-thieno[3,4-d]imidazol-4-yl)pentanoyl]aminopropyl)benzamide) (BDAB) was added during in vitro protein glycation or during protein extraction from human lenses. In vitro glycated human lens protein showed strong reaction in monomeric and polymeric crosslinked proteins by Western blot and ELISA. Glycation of BSA in the presence of BDAB resulted in covalent binding of BDAB to the protein and inhibited pentosidine formation. Mass spectrometric analysis of lysozyme glycated in the presence of BDAB showed the presence of quinoxalines at lysine residues at positions K1, K33, K96, and K116. The ELISA results indicated that cataractous lens proteins contain significantly higher levels of DDO than non-cataractous lenses (101.9±67.8 vs. 31.7±19.5AU/mg protein, p<0.0001). This study provides first direct evidence of DDO presence in human tissue proteins and establishes that AGE crosslink synthesis in the human lens occurs via DDO intermediates. Copyright © 2011 Elsevier Inc. All rights reserved.

  14. Performance evaluation of macro lens in digital close range photogrammetry

    Science.gov (United States)

    Yanagi, H.; Chikatsu, H.

    2009-08-01

    Recently, the documentation and visualization of various cultural heritages have been receiving attention, and a small Buddha such as less than 10 cm tall which was stored in the womb of Buddha is also included in cultural heritages. Zoom lenses are generally used to document these small objects and thus conserve the cultural heritage. However, there exist certain issues pertaining to the use of zoom lenses for such digital documentation. These issues include image sharpness and distortions that occur with changes in focal length setting, and in particular, the depth of field is issue from application standpoint such as documentation of the small cultural heritage. On the other hand, macro lenses can be used to capture sharp images of small objects from the view point of working distance, and its depth of field is related to the aperture of the camera. In order to evaluate the effectiveness of macro lenses in digital close range photogrammetry, macro lens and zoom lens were mounted on a digital single lens reflex camera (Canon EOS20D, 8.2 Mega pixels). This paper deals in a first part with comparative evaluations for both lenses with respect to their lens distortion, imaging mode, and calibration aspects. The results indicated that macro lenses were more suitable for digital close range photogrammetry. Calibration tests are performed to demonstrate the effectiveness and practicability of macro lens in close range photogrammetic applications.

  15. Repertoire of free-living protozoa in contact lens solutions.

    Science.gov (United States)

    Bouchoucha, Ibtissem; Aziz, Aurore; Hoffart, Louis; Drancourt, Michel

    2016-10-29

    The repertoire of free-living protozoa in contact lens solutions is poorly known despite the fact that such protozoa may act as direct pathogens and may harbor intra-cellular pathogens. Between 2009 and 2014, the contact lens solutions collected from patients presenting at our Ophthalmology Department for clinically suspected keratitis, were cultured on non-nutrient agar examined by microscope for the presence of free-living protozoa. All protozoa were identified by 18S rRNA gene sequencing. A total of 20 of 233 (8.6 %) contact lens solution specimens collected from 16 patients were cultured. Acanthamoeba amoeba in 16 solutions (80 %) collected from 12 patients and Colpoda steini, Cercozoa sp., Protostelium sp. and a eukaryotic more closely related to Vermamoeba sp., were each isolated in one solution. Cercozoa sp., Colpoda sp., Protostelium sp. and Vermamoeba sp. are reported for the first time as contaminating contact lens solutions. The repertoire of protozoa in contact lens solutions is larger than previously known.

  16. 3D Inkjet Printed Helical Antenna with Integrated Lens

    KAUST Repository

    Farooqui, Muhammad F.

    2016-08-30

    The gain of an antenna can be enhanced through the integration of a lens, although this technique has traditionally been restricted to planar antennas due to fabrication limitations of standard manufacturing processes. Here, through a unique combination of 3D and 2D inkjet printing of dielectric and metallic inks respectively, we demonstrate a lens that has been monolithically integrated to a non-planar antenna (helix) for the first time. Antenna measurements show that the integration of a Fresnel lens enhances the gain of a 2-turn helix by around 4.6 dB, which provides a peak gain of about 12.9 dBi at 8.8 GHz. The 3-dB axial ratio (AR) bandwidth of the antenna with the lens is 5.5%. This work also reports the complete characterization of this new process in terms of minimum features sizes and achievable conductivities. Due to monolithic integration of the lens through a fully printed process, this antenna configuration offers high gain performance by using a low cost and rapid fabrication technique. © 2016 IEEE.

  17. Electroactive liquid lens driven by an annular membrane.

    Science.gov (United States)

    Wei, Kang; Domicone, Nicholas Wade; Zhao, Yi

    2014-03-01

    Unlike traditional focalization that recruits multiple moving lens elements to adjust focus, liquid lenses deliver adaptive focusing by simply tuning the surface profile of liquid or the elastomer that encloses liquid. Its simple and compact configuration, low cost, and actuation efficiency promise wide industrial, medical, and consumer applications. Dielectric elastomers (DEs), one type of commercially available soft active material, have been a good fit for creating adaptive optics. In this Letter, we present an adaptive, membrane-sealed liquid lens hydrostatically coupled to a concentric annular DE actuator. Electric actuation deforms the annular DE, which induces fluid transmission between the lens part and the actuation part for lens actuation. The maximum measured focal range was from 25.4 to 105.2 mm within 1.0 kV, which significantly outperforms the existing DE-actuated liquid lenses and eliminates the need for prestraining. The lens also enables varied focal ranges by simply adjusting its initial surface sagitta, providing flexibility for practical imaging applications.

  18. Sterility and the disinfection potential of Indian contact lens solutions

    Directory of Open Access Journals (Sweden)

    Gopinathan Usha

    1994-01-01

    Full Text Available Ocular infection associated with microbial contamination of contact lens care products is a major problem in contact lens wearers. The sterility and the antimicrobial activity of contact lens care systems reflect their suitability for disinfection of contact lenses. These factors remain to be evaluated for the various newer contact lens care products manufactured in India. In this study, 35 bottles of contact lens solutions marketed by different manufacturing units in India were tested for sterility. Seven solutions were tested for antimicrobial effectiveness employing the D value method of analysis. The D value is defined as the time required to reduce a population of organisms by 90% (one log unit. A standard inoculum of the ocular isolates of Staphylococcus aureus, Pseudomonas aeruginosa, Serratia marcescens, Aspergillus fumigatus, Fusarium solani, and Acanthamoeba castellanii were used as challenge organisms. Bacterial contamination was detected in 20 (57.1% solution bottles and none yielded fungus or Acanthamoeba. Pseudomonas species were the most commonly encountered contaminant (11/20; 55%. Only sterile solutions were analyzed for antimicrobial activity. D values ranging between 12 and 20 minutes were demonstrated by six of the seven solutions against bacterial challenge. Good antifungal activity was noticed in five solutions against Fusarium solani though results varied with Aspergillus flavus and Candida albicans. All solutions were adequately effective against Acanthamoeba.

  19. Microscopic and spectroscopic investigation of an explanted opacified intraocular lens

    Energy Technology Data Exchange (ETDEWEB)

    Simon, V., E-mail: viosimon@phys.ubbcluj.ro [Babeş-Bolyai University, Faculty of Physics and Interdisciplinary Research Institute on Bio-Nano-Sciences, 400084 Cluj-Napoca (Romania); Radu, T.; Vulpoi, A. [Babeş-Bolyai University, Faculty of Physics and Interdisciplinary Research Institute on Bio-Nano-Sciences, 400084 Cluj-Napoca (Romania); Rosca, C. [Optilens Clinic of Ophthalmology, 400604 Cluj-Napoca (Romania); Eniu, D. [Iuliu Haţieganu University of Medicine and Pharmacy, Department of Molecular Sciences, 400349 Cluj-Napoca (Romania)

    2015-01-15

    Highlights: • Changes on intraocular lens (IOL) surface after implantation. • Partial opacification of IOL central area. • Elemental composition on IOL surface prior to and after implantation. • First XPS depth profiling examination of the opacifying deposits. • Cell-mediated hydroxyapatite structuring. - Abstract: The investigated polymethylmethacrylate intraocular lens explanted an year after implantation presented a fine granularity consisting of ring-like grains of about 15 μm in diameter. In order to evidence the changes occurred on intraocular lens relative to morphology, elemental composition and atomic environments, microscopic and spectroscopic analyses were carried out using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), energy-dispersive X-ray (EDS), and X-ray photoelectron (XPS) spectroscopies. The results revealed that the grains contain hydroxyapatite mineral phase. A protein layer covers the lens both in opacified and transparent zones. The amide II band is like in basal epithelial cells. The shape and size of the grains, and the XPS depth profiling results indicate the possibility of a cell-mediated process involving lens epithelial cells which fagocitated apoptotic epithelial cells, and in which the debris derived from cell necrosis were calcified. To the best of our knowledge, this is the first investigation on explanted intraocular lenses using XPS depth profiling in order to examine the inside of the opacifying deposits.

  20. Nanoceria have no genotoxic effect on human lens epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Pierscionek, Barbara K; Yasseen, Akeel A [School of Biomedical Sciences, University of Ulster, Coleraine, BT52 1SA (United Kingdom); Li, Yuebin; Schachar, Ronald A; Chen, Wei [Department of Physics, University of Texas at Arlington, Arlington, TX 76019 (United States); Colhoun, Liza M, E-mail: b.pierscionek@ulster.ac.uk, E-mail: weichen@uta.edu [Centre for Vision and Vascular Sciences, School of Medicine, Dentistry and Biomedical Sciences, Queen' s University Belfast, Grosvenor Road, Belfast, BT12 6BA (United Kingdom)

    2010-01-22

    There are no treatments for reversing or halting cataract, a disease of the structural proteins in the eye lens, that has associations with other age-related degenerative conditions such as Alzheimer's disease. The incidence of cataract and associated conditions is increasing as the average age of the population rises. Protein folding diseases are difficult to assess in vivo as proteins and their age-related changes are assessed after extraction. Nanotechnology can be used to investigate protein changes in the intact lens as well as for a potential means of drug delivery. Nanoparticles, such as cerium oxide (CeO{sub 2}) which have antioxidant properties, may even be used as a means of treating cataract directly. Prior to use in treatments, nanoparticle genotoxicity must be tested to assess the extent of any DNA or chromosomal damage. Sister chromatid exchanges were measured and DNA damage investigated using the alkaline COMET assay on cultured human lens epithelial cells, exposed to 5 and 10 {mu}g ml{sup -1} of CeO{sub 2} nanoparticles (nanoceria). Nanoceria at these dosages did not cause any DNA damage or significant increases in the number of sister chromatid exchanges. The absence of genotoxic effects on lens cells suggests that nanoceria, in the doses and exposures tested in this study, are not deleterious to the eye lens and have the potential for use in studying structural alterations, in developing non-surgical cataract treatments and in investigating other protein folding diseases.

  1. Radiation dose to physicians’ eye lens during interventional radiology

    Science.gov (United States)

    Bahruddin, N. A.; Hashim, S.; Karim, M. K. A.; Sabarudin, A.; Ang, W. C.; Salehhon, N.; Bakar, K. A.

    2016-03-01

    The demand of interventional radiology has increased, leading to significant risk of radiation where eye lens dose assessment becomes a major concern. In this study, we investigate physicians' eye lens doses during interventional procedures. Measurement were made using TLD-100 (LiF: Mg, Ti) dosimeters and was recorded in equivalent dose at a depth of 0.07 mm, Hp(0.07). Annual Hp(0.07) and annual effective dose were estimated using workload estimation for a year and Von Boetticher algorithm. Our results showed the mean Hp(0.07) dose of 0.33 mSv and 0.20 mSv for left and right eye lens respectively. The highest estimated annual eye lens dose was 29.33 mSv per year, recorded on left eye lens during fistulogram procedure. Five physicians had exceeded 20 mSv dose limit as recommended by international commission of radiological protection (ICRP). It is suggested that frequent training and education on occupational radiation exposure are necessary to increase knowledge and awareness of the physicians’ thus reducing dose during the interventional procedure.

  2. Customer loyalty among daily disposable contact lens wearers.

    Science.gov (United States)

    Patel, Neelam I; Naroo, Shehzad A; Eperjesi, Frank; Rumney, Nicholas J

    2015-02-01

    Optometric practices offer contact lenses as cash sale items or as part of monthly payment plans. With the contact lens market becoming increasingly competitive, patients are opting to purchase lenses from supermarkets and Internet suppliers. Monthly payment plans are often implemented to improve loyalty. This study aimed to compare behavioural loyalty between monthly payment plan members and non-members. BBR Optometry Ltd offers a monthly payment plan (Eyelife™) to their contact lens wearers. A retrospective audit of 38 Eyelife™ members (mean±SD: 42.7±15.0 years) and 30 non-members (mean±SD: 40.8±16.7 years) was conducted. Revenue and profits generated, service uptake and product sales between the two groups were compared over a fixed period of 18 months. Eyelife™ members generated significantly higher professional fee revenue (Ployalty among contact lens wearers, particularly service uptake and volume of lens purchases. Additionally the greater professional fees generated, render monthly payment plans an attractive business model and practice builder. Copyright © 2014 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  3. Image Analysis of Plasma Induced by Focused IR Pulsed Laser

    Directory of Open Access Journals (Sweden)

    Ahmad Hadi Ali

    2011-12-01

    Full Text Available Plasma induced by focused laser beam is very essential especially in laser material interaction. Preliminary study leading to this research has been carried out. A Q-switch Nd:YAG laser was employed as a source of energy. The laser was focused using a wide-angle camera lens. The formation of plasma at the focal region was visualized perpendicularly using a CCD video camera interfaced to an image processing system. The dynamic expansion of the laser plasma was grabbed in conjunction with a high-speed photographic system. The observation results show that the plasma was formed in an ellipsoidal shape. The lateral width and the length of the plasma were found gradually increased

  4. 67P Through the Lens of Art

    Science.gov (United States)

    Smirnova, Ekaterina; ESA, The Open University, OSIRIS

    2016-10-01

    I am an artist, who is deeply inspired by science. Since the landing of the robotic probe Philae on the comet I have been working on an art project called 67P. Having a goal of discovering our place in the universe, I chose ESA's Rosetta mission as a successful example of such discovery. During the conference I'd like to expand the dialogue to include an artistic research of the comet 67P. I invite the participants to explore 67P through the lens of art and create inspirational reciprocity in between two spheres, creative and scientific. New ideas often originate when two vocabularies are smashed together. Via this path we perhaps will be able to get a new way of exploring the topic of cometary science.During the conference I'd like to present:- 67p artwork in the art section- poster outlining the major focuses of my projectArt project focuses:- 67P water:In the art studio I re-create water that is close in composition to the water on the comet, by enriching it with D2O. With this water I paint large scale paintings, based on the photographs by Rosetta (OSIRIS, Nav. Cam.).- spectroscopic data:Inspired by data from OSIRIS, I create an additional layer to my work using augmented reality to reveal a "hidden" from the view layer. I am making a parallel with the idea that some scientific information could be viewed only by using special instruments, in this case - instruments on board of Rosetta spacecraft, such as OSIRIS. You will be able to see a virtual layer on top of my paintings using a readily available instrument - your cellphone. Red, Green and Blue colors, of particular wavelength, will be introduced to the monochromatic paintings.- magnetometer readings:International music collaboration inspired by the "Singing comet" composition, based on the magnetometer data of 67P will be offered for any interested spectators.- 67P smell:In collaboration with The Open University, UK, postcards with a smell of the comet were created, introducing the chemical components of

  5. Simulation of a Laue lens with bent Ge(111) crystals

    CERN Document Server

    Valsan, Vineeth; Frontera, Filippo; Liccardo, Vincenzo; Caroli, Ezio; Stephen, John B

    2015-01-01

    In the context of Laue project for focusing hard X-/ soft gamma-rays, an entire Laue lens, using bent Ge(111) crystal tiles, with 40 meters curvature radius, is simulated with a focal length of 20 meters. The focusing energy band is between 80 keV and 600 keV. The distortion of the output image of the lens on the focal plane due to the effect of crystal tile misalignment as well as the radial distortion arising from the curvature of the crystal is discussed in detail. Expected detection efficiency and instrument background is also estimated. Finally the sensitivity of the Laue lens is calculated. A quantitative analysis of the results of these simulation is also presented.

  6. An electrostatic deceleration lens for highly charged ions.

    Science.gov (United States)

    Rajput, J; Roy, A; Kanjilal, D; Ahuja, R; Safvan, C P

    2010-04-01

    The design and implementation of a purely electrostatic deceleration lens used to obtain beams of highly charged ions at very low energies is presented. The design of the lens is such that it can be used with parallel as well as diverging incoming beams and delivers a well focused low energy beam at the target. In addition, tuning of the final energy of the beam over a wide range (1 eV/q to several hundred eV/q, where q is the beam charge state) is possible without any change in hardware configuration. The deceleration lens was tested with Ar(8+), extracted from an electron cyclotron resonance ion source, having an initial energy of 30 keV/q and final energies as low as 70 eV/q have been achieved.

  7. Hyperchromatic lens for recording time-resolved phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Frayer, Daniel K.

    2017-07-11

    A method and apparatus for the capture of a high number of quasi-continuous effective frames of 2-D data from an event at very short time scales (from less than 10.sup.-12 to more than 10.sup.-8 seconds) is disclosed which allows for short recording windows and effective number of frames. Active illumination, from a chirped laser pulse directed to the event creates a reflection where wavelength is dependent upon time and spatial position is utilized to encode temporal phenomena onto wavelength. A hyperchromatic lens system receives the reflection and maps wavelength onto axial position. An image capture device, such as holography or plenoptic imaging device, captures the resultant focal stack from the hyperchromatic lens system in both spatial (imaging) and longitudinal (temporal) axes. The hyperchromatic lens system incorporates a combination of diffractive and refractive components to maximally separate focal position as a function of wavelength.

  8. Lens siderosis resulting from a small intralenticular metallic foreign body

    Directory of Open Access Journals (Sweden)

    Shah, Mehul A.

    2015-11-01

    Full Text Available We report a rare case of lens siderosis with an undetectable intraocular foreign body by imaging. An 8-year-old boy presented with diminution of vision in the left eye since 3 months. His parents gave a preceding uncertain history of a foreign body injury to his left eye 3 months ago while playing. Presenting visual acuity in the left eye was perception of hand movements. Slit-lamp examination revealed a total white cataract with brownish-pigmented spots on the anterior capsule of the lens, but no intraocular foreign body was found. There was also no evidence of an intraocular foreign body on ultrasonography. Patient underwent cataract extraction with intraocular lens implantation. During the operation, a small (2×1×1 mm in size intralenticular foreign body of metal material was found and removed carefully with a magnet. The patient regained 20/30 vision after surgery.

  9. Flat acoustic lens by acoustic grating with curled slits

    KAUST Repository

    Peng, Pai

    2014-10-01

    We design a flat sub-wavelength lens that can focus acoustic wave. We analytically study the transmission through an acoustic grating with curled slits, which can serve as a material with tunable impedance and refractive index for acoustic waves. The effective parameters rely on the geometry of the slits and are independent of frequency. A flat acoustic focusing lens by such acoustic grating with gradient effective refractive index is designed. The focusing effect is clearly observed in simulations and well predicted by the theory. We demonstrate that despite the large impedance mismatch between the acoustic lens and the matrix, the intensity at the focal point is still high due to Fabry-Perot resonance.

  10. Eye lens crystallins: a component of intraocular pseudoexfoliative material.

    Science.gov (United States)

    Veromann, Siiri; Sünter, Alar; Juronen, Erkki; Tasa, Gunnar; Panov, Aleksei

    2004-01-01

    Feeding experimental animals (19 pigs) with surplus sucrose and salt (NaCl) caused cataractous changes in lens tissue and triggered the formation of pseudoexfoliative material on the lens capsule. In the control animals (15 pigs) pseudoexfoliative material was absent. The avidin-biotin complex immunohistochemical method was applied to the pseudoexfoliative material obtained from 15 porcine experimental precataractous lenses and 1 spontaneously cataractous eye and revealed crystallins as a component of the intraocular pseudoexfoliative material. To prevent the development of both intraocular pseudoexfoliative material and crystallin-dependent glaucomatous changes in the trabecular meshwork of the eye, it is important to avoid any cataractogenic insult, including surplus sucrose and salt consumption, causing crystallin leakage from the lens. Copyright 2004 S. Karger AG, Basel

  11. Terahertz epsilon-near-zero graded-index lens.

    Science.gov (United States)

    Torres, Víctor; Pacheco-Peña, Víctor; Rodríguez-Ulibarri, Pablo; Navarro-Cía, Miguel; Beruete, Miguel; Sorolla, Mario; Engheta, Nader

    2013-04-08

    An epsilon-near-zero graded-index converging lens with planar faces is proposed and analyzed. Each perfectly-electric conducting (PEC) waveguide comprising the lens operates slightly above its cut-off frequency and has the same length but different cross-sectional dimensions. This allows controlling individually the propagation constant and the normalized characteristic impedance of each waveguide for the desired phase front at the lens output while Fresnel reflection losses are minimized. A complete theoretical analysis based on the waveguide theory and Fermat's principle is provided. This is complemented with numerical simulation results of two-dimensional and three-dimensional lenses, made of PEC and aluminum, respectively, and working in the terahertz regime, which show good agreement with the analytical work.

  12. An integral-field spectroscopic strong lens survey

    Energy Technology Data Exchange (ETDEWEB)

    Bolton, Adam S [Harvard-Smithsonian Center for Astrophysics, 60 Garden St. MS-20, Cambridge, MA 02138 (United States); Burles, Scott [Department of Physics and Kavli Institute, Massachusetts Institute of Technology, 77 Massachusetts Ave., Cambridge, MA 02139 (United States)

    2007-12-15

    We present the observational results of a survey for strong gravitational lens systems consisting of extended emission-line galaxies lensed by intervening early-type galaxies, conducted using integral field units (IFUs) of the Magellan IMACS and Gemini GMOS-N spectrographs. These data are highly valuable for corroborating the lensing interpretation of Hubble Space Telescope imaging data. We show that in many cases, ground-based IFU spectroscopy is in fact competitive with space-based imaging for the measurement of the mass model parameters of the lensing galaxy. We demonstrate a novel technique of three-dimensional gravitational lens modeling for a single lens system with a resolved lensed rotation curve. We also describe the details of our custom IFU data analysis software, which performs optimal multi-fiber extraction, relative and absolute wavelength calibration to a few hundredths of a pixel RMS and nearly Poisson-limited sky subtraction.

  13. Bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome

    Directory of Open Access Journals (Sweden)

    Sahu, Sabin

    2016-12-01

    Full Text Available A rare case of bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome is reported. A 21-year-old female presented with decreased vision in both eyes. Her unaided visual acuity was 20/200 and 20/400 in the right and left eye, respectively, improving to 20/40 with –4.5 DS/–3.0 DC x 10° correction in the right eye and 20/80 with –10.0 DS/–6.5 Dc x10° correction in the left eye. On slit lamp examination under mydriasis, both eyes revealed ectopia lentis with lens coloboma and stretched zonules. Fundus examination revealed pigmentary changes at the fovea. On systemic evaluation, she was diagnosed with Marfan syndrome. She was prescribed a refractive correction in form of a contact lens and kept under observation.

  14. Bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome

    Science.gov (United States)

    Sahu, Sabin; Yadav, Reena; Gupta, Sharad; Raj Puri, Lila

    2016-01-01

    A rare case of bilateral ectopia lentis with isolated lens coloboma in Marfan syndrome is reported. A 21-year-old female presented with decreased vision in both eyes. Her unaided visual acuity was 20/200 and 20/400 in the right and left eye, respectively, improving to 20/40 with –4.5 DS/–3.0 DC x 10° correction in the right eye and 20/80 with –10.0 DS/–6.5 Dc x10° correction in the left eye. On slit lamp examination under mydriasis, both eyes revealed ectopia lentis with lens coloboma and stretched zonules. Fundus examination revealed pigmentary changes at the fovea. On systemic evaluation, she was diagnosed with Marfan syndrome. She was prescribed a refractive correction in form of a contact lens and kept under observation. PMID:28028488

  15. Gravitational Lens Modeling with Genetic Algorithms and Particle Swarm Optimizers

    CERN Document Server

    Rogers, Adam

    2011-01-01

    Strong gravitational lensing of an extended object is described by a mapping from source to image coordinates that is nonlinear and cannot generally be inverted analytically. Determining the structure of the source intensity distribution also requires a description of the blurring effect due to a point spread function. This initial study uses an iterative gravitational lens modeling scheme based on the semilinear method to determine the linear parameters (source intensity profile) of a strongly lensed system. Our 'matrix-free' approach avoids construction of the lens and blurring operators while retaining the least squares formulation of the problem. The parameters of an analytical lens model are found through nonlinear optimization by an advanced genetic algorithm (GA) and particle swarm optimizer (PSO). These global optimization routines are designed to explore the parameter space thoroughly, mapping model degeneracies in detail. We develop a novel method that determines the L-curve for each solution automa...

  16. No turnover in lens lipids for the entire human lifespan.

    Science.gov (United States)

    Hughes, Jessica R; Levchenko, Vladimir A; Blanksby, Stephen J; Mitchell, Todd W; Williams, Alan; Truscott, Roger J W

    2015-03-11

    Lipids are critical to cellular function and it is generally accepted that lipid turnover is rapid and dysregulation in turnover results in disease (Dawidowicz 1987; Phillips et al., 2009; Liu et al., 2013). In this study, we present an intriguing counter-example by demonstrating that in the center of the human ocular lens, there is no lipid turnover in fiber cells during the entire human lifespan. This discovery, combined with prior demonstration of pronounced changes in the lens lipid composition over a lifetime (Hughes et al., 2012), suggests that some lipid classes break down in the body over several decades, whereas others are stable. Such substantial changes in lens cell membranes may play a role in the genesis of age-related eye disorders. Whether long-lived lipids are present in other tissues is not yet known, but this may prove to be important in understanding the development of age-related diseases.

  17. Global Optimization methods for Gravitational Lens Systems with Regularized Sources

    CERN Document Server

    Rogers, Adam

    2012-01-01

    Several approaches exist to model gravitational lens systems. In this study, we apply global optimization methods to find the optimal set of lens parameters using a genetic algorithm. We treat the full optimization procedure as a two-step process: an analytical description of the source plane intensity distribution is used to find an initial approximation to the optimal lens parameters. The second stage of the optimization uses a pixelated source plane with the semilinear method to determine an optimal source. Regularization is handled by means of an iterative method and the generalized cross validation (GCV) and unbiased predictive risk estimator (UPRE) functions that are commonly used in standard image deconvolution problems. This approach simultaneously estimates the optimal regularization parameter and the number of degrees of freedom in the source. Using the GCV and UPRE functions we are able to justify an estimation of the number of source degrees of freedom found in previous work. We test our approach ...

  18. Misdiagnosis induced intraocular lens dislocation in anterior megalophthalmos

    Institute of Scientific and Technical Information of China (English)

    WANG Qi-wei; XU Wen; ZHU Ya-nan; LI Jin-yu; ZHANG Li; YAO Ke

    2012-01-01

    Anterior megalophthalmos (AM) is an uncommon developmental anomaly of the anterior segment of the eye with a constellation of findings that includes enlarged cornea,deep anterior chamber,posterior positioning of the iris and lens,iris stroma atrophy,hypoplasia of iris dilator,pupil displacement,large capsular bag,lens subluxation,prematurely cataract and the tendency to retinal detachment.AM,especially when symptoms are mild,is not an easy disease to diagnose.We present 3 AM cases that were misdiagnosed as congenital cataract with weak zonule and megalocornea.Intraocular lenses (IOLs) dislocated after standard cataract surgeries and subsequent surgery (replacing the dislocated IOLs with iris-claw intraocular lenses) achieved satisfactory outcome.Although rare,AM should be included in the differential diagnosis of enlarged cornea and we recommend implanting Artisan lens in AM patients.

  19. Thermal Diffusivity Measurements in Edible Oils using Transient Thermal Lens

    Science.gov (United States)

    Valdez, R. Carbajal.; Pérez, J. L. Jiménez.; Cruz-Orea, A.; Martín-Martínez, E. San.

    2006-11-01

    Time resolved thermal lens (TL) spectrometry is applied to the study of the thermal diffusivity of edible oils such as olive, and refined and thermally treated avocado oils. A two laser mismatched-mode experimental configuration was used, with a He Ne laser as a probe beam and an Ar+ laser as the excitation one. The characteristic time constant of the transient thermal lens was obtained by fitting the experimental data to the theoretical expression for a transient thermal lens. The results showed that virgin olive oil has a higher thermal diffusivity than for refined and thermally treated avocado oils. This measured thermal property may contribute to a better understanding of the quality of edible oils, which is very important in the food industry. The thermal diffusivity results for virgin olive oil, obtained from this technique, agree with those reported in the literature.

  20. Investigation into photostability of soybean oils by thermal lens spectroscopy.

    Science.gov (United States)

    Savi, E L; Malacarne, L C; Baesso, M L; Pintro, P T M; Croge, C; Shen, J; Astrath, N G C

    2015-06-15

    Assessment of photochemical stability is essential for evaluating quality and the shelf life of vegetable oils, which are very important aspects of marketing and human health. Most of conventional methods used to investigate oxidative stability requires long time experimental procedures with high consumption of chemical inputs for the preparation or extraction of sample compounds. In this work we propose a time-resolved thermal lens method to analyze photostability of edible oils by quantitative measurement of photoreaction cross-section. An all-numerical routine is employed to solve a complex theoretical problem involving photochemical reaction, thermal lens effect, and mass diffusion during local laser excitation. The photostability of pure oil and oils with natural and synthetic antioxidants is investigated. The thermal lens results are compared with those obtained by conventional methods, and a complete set of physical properties of the samples is presented.

  1. Broadband Wide Angle Lens Implemented with Dielectric Metamaterials

    Directory of Open Access Journals (Sweden)

    Anthony Starr

    2011-08-01

    Full Text Available The Luneburg lens is a powerful imaging device, exhibiting aberration free focusing for parallel rays incident from any direction. However, its advantages are offset by a focal surface that is spherical and thus difficult to integrate with standard planar detector and emitter arrays. Using the recently developed technique of transformation optics, it is possible to transform the curved focal surface to a flat plane while maintaining the perfect focusing behavior of the Luneburg over a wide field of view. Here we apply these techniques to a lesser-known refractive Luneburg lens and implement the design with a metamaterial composed of a semi-crystalline distribution of holes drilled in a dielectric. In addition, we investigate the aberrations introduced by various approximations made in the implementation of the lens. The resulting design approach has improved mechanical strength with small aberrations and is ideally suited to implementation at infrared and visible wavelengths.

  2. Broadband Wide Angle Lens Implemented with Dielectric Metamaterials

    Science.gov (United States)

    Hunt, John; Kundtz, Nathan; Landy, Nathan; Nguyen, Vinh; Perram, Tim; Starr, Anthony; Smith, David R.

    2011-01-01

    The Luneburg lens is a powerful imaging device, exhibiting aberration free focusing for parallel rays incident from any direction. However, its advantages are offset by a focal surface that is spherical and thus difficult to integrate with standard planar detector and emitter arrays. Using the recently developed technique of transformation optics, it is possible to transform the curved focal surface to a flat plane while maintaining the perfect focusing behavior of the Luneburg over a wide field of view. Here we apply these techniques to a lesser-known refractive Luneburg lens and implement the design with a metamaterial composed of a semi-crystalline distribution of holes drilled in a dielectric. In addition, we investigate the aberrations introduced by various approximations made in the implementation of the lens. The resulting design approach has improved mechanical strength with small aberrations and is ideally suited to implementation at infrared and visible wavelengths. PMID:22164056

  3. Investigation into photostability of soybean oils by thermal lens spectroscopy

    Science.gov (United States)

    Savi, E. L.; Malacarne, L. C.; Baesso, M. L.; Pintro, P. T. M.; Croge, C.; Shen, J.; Astrath, N. G. C.

    2015-06-01

    Assessment of photochemical stability is essential for evaluating quality and the shelf life of vegetable oils, which are very important aspects of marketing and human health. Most of conventional methods used to investigate oxidative stability requires long time experimental procedures with high consumption of chemical inputs for the preparation or extraction of sample compounds. In this work we propose a time-resolved thermal lens method to analyze photostability of edible oils by quantitative measurement of photoreaction cross-section. An all-numerical routine is employed to solve a complex theoretical problem involving photochemical reaction, thermal lens effect, and mass diffusion during local laser excitation. The photostability of pure oil and oils with natural and synthetic antioxidants is investigated. The thermal lens results are compared with those obtained by conventional methods, and a complete set of physical properties of the samples is presented.

  4. Iris reconstruction combined with iris-claw intraocular lens implantation for the management of iris-lens injured patients

    Science.gov (United States)

    Hu, Shufang; Wang, Mingling; Xiao, Tianlin; Zhao, Zhenquan

    2016-01-01

    Aim: To study the efficiency and safety of iris reconstruction combined with iris-claw intraocular lens (IOL) implantation in the patients with iris-lens injuries. Settings and Design: Retrospective, noncomparable consecutive case series study. Materials and Methods: Eleven patients (11 eyes) following iris-lens injuries underwent iris reconstructions combined with iris-claw IOL implantations. Clinical data, such as cause and time of injury, visual acuity (VA), iris and lens injuries, surgical intervention, follow-up period, corneal endothelial cell count, and optical coherence tomography, were collected. Results: Uncorrected VA (UCVA) in all injured eyes before combined surgery was equal to or <20/1000. Within a 1.1–4.2-year follow-up period, a significant increase, equal to or better than 20/66, in UCVA was observed in six (55%) cases, and in best-corrected VA (BCVA) was observed in nine (82%) cases. Postoperative BCVA was 20/40 or better in seven cases (64%). After combined surgery, the iris returned to its natural round shape or smaller pupil, and the iris-claw IOLs in the 11 eyes were well-positioned on the anterior surface of reconstructed iris. No complications occurred in those patients. Conclusions: Iris reconstruction combined with iris-claw IOL implantation is a safe and efficient procedure for an eye with iris-lens injury in the absence of capsular support. PMID:27146932

  5. Plasma chromograninx

    DEFF Research Database (Denmark)

    Goetze, Jens P; Hilsted, Linda M; Rehfeld, Jens F

    2014-01-01

    Cardiovascular risk assessment remains difficult in elderly patients. We examined whether chromogranin A (CgA) measurement in plasma may be valuable in assessing risk of death in elderly patients with symptoms of heart failure in a primary care setting. A total of 470 patients (mean age 73 years......) were followed for 10 years. For CgA plasma measurement, we used a two-step method including a screening test and a confirmative test with plasma pre-treatment with trypsin. Cox multivariable proportional regression and receiver-operating curve (ROC) analyses were used to assess mortality risk...... of follow-up showed significant additive value of CgA confirm measurements compared with NT-proBNP and clinical variables. CgA measurement in the plasma of elderly patients with symptoms of heart failure can identify those at increased risk of short- and long-term mortality....

  6. Plasma Cleaning

    Science.gov (United States)

    Hintze, Paul E.

    2016-01-01

    NASA's Kennedy Space Center has developed two solvent-free precision cleaning techniques: plasma cleaning and supercritical carbon dioxide (SCCO2), that has equal performance, cost parity, and no environmental liability, as compared to existing solvent cleaning methods.

  7. Can manipulation of orthokeratology lens parameters modify peripheral refraction?

    Science.gov (United States)

    Kang, Pauline; Gifford, Paul; Swarbrick, Helen

    2013-11-01

    To investigate changes in peripheral refraction, corneal topography, and aberrations induced by changes in orthokeratology (OK) lens parameters in myopes. Subjects were fitted with standard OK lenses that were worn overnight for 2 weeks. Peripheral refraction, corneal topography, and corneal surface aberrations were measured at baseline and after 14 nights of OK lens wear. Subsequent to a 2-week washout period, subjects were refitted with another set of lenses where one eye was randomly assigned to wear an OK lens with a smaller optic zone diameter (OZD) and the other eye with a steeper peripheral tangent. Measurements were taken again at a second baseline and after 14 days of overnight wear of the second OK lens set. Standard OK lenses with a 6-mm OZD and 1/4 peripheral tangent caused significant changes in both peripheral refraction and corneal topography. Significant hyperopic shift occurred in the central visual field (VF) while a myopic shift was found at 35 degrees in the nasal VF. OK induced significant reductions in corneal power at all positions along the horizontal corneal chord except at 2.4 mm nasal where there was no significant change and at 2.8 mm nasal where there was an increase in corneal refractive power. A positive shift in spherical aberration was induced for all investigated lens designs except for the 1/2 tangent design when calculated over a 4-mm pupil. Reducing OZD and steepening the peripheral tangent did not cause significant changes in peripheral refraction or corneal topography profiles across the horizontal meridian. OK lenses caused significant changes in peripheral refraction, corneal topography, and corneal surface aberrations. Modifying OZD and peripheral tangent made no significant difference to the peripheral refraction or corneal topography profile. Attempting to customize refraction and topography changes through manipulation of OK lens parameters appears to be a difficult task.

  8. Microball lens integrated fiber probe for optical frequency domain imaging

    Institute of Scientific and Technical Information of China (English)

    Jae-Ho Han; J.U.Kang

    2011-01-01

    An integrated microball lens fiber catheter probe is demonstrated, which has better lateral resolution and longer working distance than a corresponding bare fiber probe with diverging beam for Fourier domain optical coherence tomography (FDOCT). Simulation results are shown to gain the effect of the distance between the microball lens and the bare fiber to the focusing plane and beam width. The freedom of modifying the working distance and lateral resolution is shown. This is achieved by changing the gap distance between the single-mode fiber and the microball lens within the packaged surgical needle catheter without using an additional beam expander having a fixed length. The probe successfully acquired cross-sectional images of ocular tissues from an animal sample with the proposed miniaturized imaging probe.%@@ An integrated microball lens fiber catheter probe is demonstrated,which has better lateral resolution and longer working distance than a corresponding bare fiber probe with diverging beam for Fourier domain optical coherence tomography(FDOCT).Simulation results are shown to gain the effect of the distance between the microball lens and the bare fiber to the focusing plane and beam width.The freedom of modifying the working distance and lateral resolution is shown.This is achieved by changing the gap distance between the single-mode fiber and the microball lens within the packaged surgical needle catheter without using an additional beam expander having a fixed length.The probe successfully acquired crosssectional images of ocular tissues from an animal sample with the proposed miniaturized imaging probe.

  9. Plasma confinement

    CERN Document Server

    Hazeltine, R D

    2003-01-01

    Detailed and authoritative, this volume examines the essential physics underlying international research in magnetic confinement fusion. It offers readable, thorough accounts of the fundamental concepts behind methods of confining plasma at or near thermonuclear conditions. Designed for a one- or two-semester graduate-level course in plasma physics, it also represents a valuable reference for professional physicists in controlled fusion and related disciplines.

  10. Holographic Rovers: Augmented Reality and the Microsoft HoloLens

    Science.gov (United States)

    Toler, Laura

    2017-01-01

    Augmented Reality is an emerging field in technology, and encompasses Head Mounted Displays, smartphone apps, and even projected images. HMDs include the Meta 2, Magic Leap, Avegant Light Field, and the Microsoft HoloLens, which is evaluated specifically. The Microsoft HoloLens is designed to be used as an AR personal computer, and is being optimized with that goal in mind. Microsoft allied with the Unity3D game engine to create an SDK for interested application developers that can be used in the Unity environment.

  11. The control of aniseikonia after intraocular lens implantation.

    Science.gov (United States)

    Hillman, J S; Hawkswell, A

    1985-01-01

    This paper reports a study of postoperative refraction and eikonometry of 50 patients who had unilateral cataract extraction with implantation of a pupil-supported intraocular lens. The mean postoperative aniseikonia (+/- SD) was 1.97 (+/- 1.82). A statistically significant relationship was shown between anisometropia and aniseikonia. Despite aniseikonia of up to 7.8 per cent there were no diplopia problems as the visual system exhibits a high degree of tolerance. It is concluded that aniseikonia can be controlled to within clinically acceptable limits by the simple calculation of intraocular lens power for isometropia.

  12. Technology needs for the development of the accommodative intraocular lens

    Science.gov (United States)

    Nishi, Okihiro

    2010-02-01

    Refilling the lens capsule while preserving capsular integrity offers the potential to restore ocular accommodation. There are two persisting problems in capsular bag refilling for possible clinical application: Leakage of the injectable material through the capsular opening and capsular opacification. Numerous attempts for solving these cardinal problems have not been proven to be clinically applicable. Recently, we developed a novel capsular bag refilling procedure using a novel accommodative intraocular lens that serves as an optic as well as a plug for sealing the capsular opening. The procedure and the results of monkey experiments will be presented.

  13. Contact lens associated microbial keratitis: practical considerations for the optometrist

    Directory of Open Access Journals (Sweden)

    Zimmerman AB

    2016-01-01

    Full Text Available Aaron B Zimmerman, Alex D Nixon, Erin M Rueff College of Optometry, The Ohio State University, Columbus, OH, USAAbstract: Microbial keratitis (MK is a corneal condition that encompasses several different pathogens and etiologies. While contact lens associated MK is most often associated with bacterial infections, other pathogens (fungi, Acanthamoeba species, etc may be responsible. This review summarizes the risk factors, microbiology, diagnostic characteristics, and treatment options for all forms of contact lens-related MK.Keywords: corneal ulcer, fungal keratitis, bacterial keratitis, Acanthamoeba, Fusarium, Pseudomonas

  14. Changes in the Eye Microbiota Associated with Contact Lens Wearing

    OpenAIRE

    Hakdong Shin; Kenneth Price; Luong Albert; Jack Dodick; Lisa Park; Maria Gloria Dominguez-Bello

    2016-01-01

    ABSTRACT Wearing contact lenses has been identified as a risk factor for the development of eye conditions such as giant papillary conjunctivitis and keratitis. We hypothesized that wearing contact lenses is associated with changes in the ocular microbiota. We compared the bacterial communities of the conjunctiva and skin under the eye from 58 subjects and analyzed samples from 20 subjects (9 lens wearers and 11 non-lens wearers) taken at 3 time points using a 16S rRNA gene-based sequencing t...

  15. Wafer-level fabrication of arrays of glass lens doublets

    Science.gov (United States)

    Passilly, Nicolas; Perrin, Stéphane; Albero, Jorge; Krauter, Johann; Gaiffe, Olivier; Gauthier-Manuel, Ludovic; Froehly, Luc; Lullin, Justine; Bargiel, Sylwester; Osten, Wolfgang; Gorecki, Christophe

    2016-04-01

    Systems for imaging require to employ high quality optical components in order to dispose of optical aberrations and thus reach sufficient resolution. However, well-known methods to get rid of optical aberrations, such as aspherical profiles or diffractive corrections are not easy to apply to micro-optics. In particular, some of these methods rely on polymers which cannot be associated when such lenses are to be used in integrated devices requiring high temperature process for their further assembly and separation. Among the different approaches, the most common is the lens splitting that consists in dividing the focusing power between two or more optical components. In here, we propose to take advantage of a wafer-level technique, devoted to the generation of glass lenses, which involves thermal reflow in silicon cavities to generate lens doublets. After the convex lens sides are generated, grinding and polishing of both stack sides allow, on the first hand, to form the planar lens backside and, on the other hand, to open the silicon cavity. Nevertheless, silicon frames are then kept and thinned down to form well-controlled and auto-aligned spacers between the lenses. Subsequent accurate vertical assembly of the glass lens arrays is performed by anodic bonding. The latter ensures a high level of alignment both laterally and axially since no additional material is required. Thanks to polishing, the generated lens doublets are then as thin as several hundreds of microns and compatible with micro-opto-electro-systems (MOEMS) technologies since they are only made of glass and silicon. The generated optical module is then robust and provide improved optical performances. Indeed, theoretically, two stacked lenses with similar features and spherical profiles can be almost diffraction limited whereas a single lens characterized by the same numerical aperture than the doublet presents five times higher wavefront error. To demonstrate such assumption, we fabricated glass

  16. Integrated Lens Antennas for Multi-Pixel Receivers

    Science.gov (United States)

    Lee, Choonsup; Chattopadhyay, Goutam

    2011-01-01

    Future astrophysics and planetary experiments are expected to require large focal plane arrays with thousands of detectors. Feedhorns have excellent performance, but their mass, size, fabrication challenges, and expense become prohibitive for very large focal plane arrays. Most planar antenna designs produce broad beam patterns, and therefore require additional elements for efficient coupling to the telescope optics, such as substrate lenses or micromachined horns. An antenna array with integrated silicon microlenses that can be fabricated photolithographically effectively addresses these issues. This approach eliminates manual assembly of arrays of lenses and reduces assembly errors and tolerances. Moreover, an antenna array without metallic horns will reduce mass of any planetary instrument significantly. The design has a monolithic array of lens-coupled, leaky-wave antennas operating in the millimeter- and submillimeter-wave frequencies. Electromagnetic simulations show that the electromagnetic fields in such lens-coupled antennas are mostly confined in approximately 12 15 . This means that one needs to design a small-angle sector lens that is much easier to fabricate using standard lithographic techniques, instead of a full hyper-hemispherical lens. Moreover, this small-angle sector lens can be easily integrated with the antennas in an array for multi-pixel imager and receiver implementation. The leaky antenna is designed using double-slot irises and fed with TE10 waveguide mode. The lens implementation starts with a silicon substrate. Photoresist with appropriate thickness (optimized for the lens size) is spun on the substrate and then reflowed to get the desired lens structure. An antenna array integrated with individual lenses for higher directivity and excellent beam profile will go a long way in realizing multi-pixel arrays and imagers. This technology will enable a new generation of compact, low-mass, and highly efficient antenna arrays for use in multi

  17. Delayed Hyphema after Posterior Chamber Intraocular Lens Implantation

    Institute of Scientific and Technical Information of China (English)

    1994-01-01

    A56-year-old man with senile cataract in the left eye underwent extracapsularcataract extraction(ECCE)and posteriorchamber intraocular lens(IOL)implanta-tion on December 19,1988.A 13D J-loopplannar lens was inserted in the ciliary sul-cus.The operation was successful with mildpostoperative response.His corrected visionwas 20/20. He had a follow-up examination onMarch 20,1989.No complication was notedand his vision retained 20/20.In theevening of the same day,the patient sud-denly felt discomfortable and...

  18. Non-Thermal Electromagnetic Radiation Damage to Lens Epithelium

    OpenAIRE

    Bormusov, Elvira; P.Andley, Usha; Sharon, Naomi; Schächter, Levi; Lahav, Assaf; Dovrat, Ahuva

    2008-01-01

    High frequency microwave electromagnetic radiation from mobile phones and other modern devices has the potential to damage eye tissues, but its effect on the lens epithelium is unknown at present. The objective of this study was to investigate the non-thermal effects of high frequency microwave electromagnetic radiation (1.1GHz, 2.22 mW) on the eye lens epithelium in situ. Bovine lenses were incubated in organ culture at 35°C for 10-15 days. A novel computer-controlled microwave source was us...

  19. Diffraction enhanced X-ray imaging of mammals crystalline lens

    Energy Technology Data Exchange (ETDEWEB)

    Antunes, A. [Departamento de Fisica Aplicada, USP, CP 66318, 05315-970 Sao Paulo, SP (Brazil)]. E-mail: antunes@if.usp.br; Hoennicke, M.G. [LORXI, Departamento de Fisica, Universidade Federal do Parana, Curitiba (Brazil); Safatle, A.M.V. [Faculdade de Medicina Veterinaria e Zootecnia, USP, 05508-900 Sao Paulo, SP (Brazil); Cusatis, C. [LORXI, Departamento de Fisica, Universidade Federal do Parana, Curitiba (Brazil); Moraes Barros, P.S. [Faculdade de Medicina Veterinaria e Zootecnia, USP, 05508-900 Sao Paulo, SP (Brazil); Morelhao, S.L. [Departamento de Fisica Aplicada, USP, CP 66318, 05315-970 Sao Paulo, SP (Brazil)

    2005-08-15

    Crystalline lenses are transparent biological materials where the organization of the lens fibers can also be affected by changes at molecular level, and therefore the structure and morphology of the tissue can be correlated to the loss of transparency of the lens. In this work, internal structure of mammal lenses regarding the long-range ordering of the fibers are investigated by diffraction enhanced X-ray imaging (DEI) radiography. Moreover, DEI and absorption X-ray synchrotron radiographs for healthy and cataractous crystalline lenses are compared. Significant differences in healthy and cataractous crystalline lenses are observed.

  20. Curiosity's Mars Hand Lens Imager (MAHLI): Inital Observations and Activities

    Science.gov (United States)

    Edgett, K. S.; Yingst, R. A.; Minitti, M. E.; Robinson, M. L.; Kennedy, M. R.; Lipkaman, L. J.; Jensen, E. H.; Anderson, R. C.; Bean, K. M.; Beegle, L. W.; Carsten, J. L.; Collins, C. L.; Cooper, B.; Deen, R. G.; Gupta, S.

    2013-01-01

    MAHLI (Mars Hand Lens Imager) is a 2-megapixel focusable macro lens color camera on the turret on Curiosity's robotic arm. The investigation centers on stratigraphy, grain-scale texture, structure, mineralogy, and morphology of geologic materials at Curiosity's Gale robotic field site. MAHLI acquires focused images at working distances of 2.1 cm to infinity; for reference, at 2.1 cm the scale is 14 microns/pixel; at 6.9 cm it is 31 microns/pixel, like the Spirit and Opportunity Microscopic Imager (MI) cameras.

  1. Research on inter-fraction and intra-fraction motion of crystalline lens in radiotherapy

    Directory of Open Access Journals (Sweden)

    Shu-ming YANG

    2013-03-01

    Full Text Available Objective  To investigate the range of inter-fraction and intra-fraction motion of crystalline lens in radiotherapy. Methods  The CT and MRI images of 17 patients were registered, and the profile of crystalline lens was delineated to determine the respective center coordinates, thus simulating and analyzing inter-fraction and intra-fraction motion of lens in radiotherapy. Results  Both left and right lens moved in different degree during both inter-or intra-fraction phase. The range of lens movement was larger in inter-fraction than in intra-fraction phase in all directions. Conclusion  When radiotherapy is given in the free state, considering the distance of lens movement alone in inter-and intra-fraction and without considering the setup error, the lens planning organs at risk should increase 1.5mm outside the lens boundary.

  2. Effects of Extremely Low Frequency Magnetic Field on the Lens of the Rats

    Directory of Open Access Journals (Sweden)

    Uğur Keklikçi

    2008-12-01

    Full Text Available The present aim of the study is to evaluate the effects of extremely low frequency magnetic field (ELF MF on lens epithelial cells. Twenty adult female Spraque Dawley rats were divided into two groups, each containing 10 rats. The experimental group received magnetic field 2 hours/day for 7 days. The second group receiving standard laboratory care, was used as a control. The specimens were evaluated for cataractogenesis alteretion of lens and histological changes in lens epithelial cells.On biomicroscopic examination, no pathological damage to the lens was detected. In addition, on microscopic examination of materials in the controls, there were also no changes in lens fibrils and lens epithelial cells. In experimental group, however, only a slight pleomorphism was determined at the surface of epithelial cells.In the study, it is cocluded that ELF MF exposure do might not lead to histopathological alterations of the lens fibrils and lens epithelial cells.

  3. Superiority of zoom lens coupling in designing a novel X-ray image detector

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    We design a novel X-ray image detector by lens coupling a Gd2O2S:Tb intensifying screen with a high performance low-light-level (L3,which often means luminescence less than 10-3 Lux) image intensifier.Different coupling effects on imaging performance between zoom lens and fix-focus lens are analyzed theoretically.In experiment,for designing a detector of 15-inch visual field,the system coupled by zoom lens is of 12.25-1p/cm resolution,while the one with fix-focus lens is 10 lp/cm.The superiority of zoom lens is validated.It is concluded that zoom lens preserves the image information better than fix-focus lens and improves the imaging system's performance in this design,which is referential to the design of other optical imaging systems.

  4. Concept design and simulation of a concentration lens with uniform square irradiance

    Science.gov (United States)

    Li, Dianhong; Xuan, Yimin

    2017-10-01

    A planar concentration lens comprised of square and rectangular lenses for solar concentration application is presented. The design of the concentration lens was based on the concept of Fresnel lens and the layout of the square light spot was proposed to match the receiving area. The uniformity of the light spot was determined by the structure of the concentration lens, which has different structures for different design wavelengths. The uniformity of the light spot and concentration ratio of the concentration lens were simulated. The numerical results indicate that the concentration ratio and uniformity of the light spot decrease with the increment of the wavelength. In order to improve the performance of the concentration lens, a novel hybrid wavelength structures was designed. The analysis results reveal that both the spot uniformity and concentration ratio of such a novel concentration lens were insensitive to the wavelengths variation. In addition, the angular tolerance of the concentration lens was discussed for different incident angles.

  5. The mechanical response of the porcine lens to a spinning test.

    Science.gov (United States)

    Reilly, Matthew A; Martius, Philipp; Kumar, Saurav; Burd, Harvey J; Stachs, Oliver

    2016-06-01

    The pig lens has been used as a model for presbyopia as pigs lack accommodative ability. Previous studies using microindentation have indicated that the shear modulus distribution is qualitatively similar to that of the aged human lens and that the lens does not alter its refractive power due to equatorial stretching. A lens spinning test was used to determine whether prior lens stiffness data obtained from a sectioned porcine lens were reliable and whether the testing conditions significantly influence the lens' mechanical properties. The elastic modulus distribution determined for fresh lenses closely matched that measured previously using a microindentation test. Confocal scanning laser microscopy was used to evaluate changes to the lens' structure arising from mechanical stress and following storage for up to one week.

  6. Management of posteriorly dislocated crystalline lens with perfluorocarbon liquid and fibrin glue-assisted scleral-fixated intraocular lens implantation.

    Science.gov (United States)

    Lee, Soo Jung; Kim, In Geun; Park, Jung Min

    2013-03-01

    We describe a technique that uses a 23-gauge transconjunctival sutureless vitrectomy with perfluorocarbon liquid (PFCL) and phacoemulsification to manage a dropped nucleus. The PFCL is injected into the vitreous space until the dislocated lens reaches the iris plane and is then removed using phacoemulsification in the anterior chamber. After intraocular lens (IOL) implantation, a 23-gauge forceps is passed through the sclerotomy to grasp the IOL haptic, which is pulled onto the ocular surface. Tunnels are made at the edge of the flap with a 26-gauge needle into which the 2 haptics are tucked for additional stability. The scleral flaps and conjunctiva are then glued using biological glue. Perfluorocarbon liquid reduces lens repulsion and blocks the transmission of the ultrasound stream to the retina. The fibrin glue-assisted sutureless IOL implantation technique could reduce complications and suture-related problems.

  7. Association between multifocal soft contact lens decentration and visual performance

    Directory of Open Access Journals (Sweden)

    Fedtke C

    2016-06-01

    Full Text Available Cathleen Fedtke,1 Klaus Ehrmann,1,2 Varghese Thomas,1 Ravi C Bakaraju1,2 1The Brien Holden Vision Institute, Clinical Trial Research Centre, 2School of Optometry and Vision Science, The University of New South Wales, Sydney, NSW, Australia Purpose: The aim of this study was to assess the association between decentration of several commercial multifocal soft contact lenses (MFCLs and various objective and subjective visual performance variables in presbyopic and non-presbyopic participants. Materials and methods: All presbyopic (age >40 years, near add ≥+1.25 D and non-presbyopic (age ≥18 years, no near add requirements, spherical equivalent ≤-0.50 D participants were each fitted bilaterally with six and two MFCLs (test lens, respectively, and with one single vision lens (control lens. Lens decentration, ie, the x- and y-differences between the contact lens and pupil centers, was objectively determined. Third-order aberrations were measured and compared. Visual performance (high- and low-contrast acuities and several subjective variables was analyzed for any associations (Pearson’s correlation, r with MFCL decentration. Results: A total of 17 presbyopic (55.1±6.9 years and eight non-presbyopic (31.0±3.3 years participants completed the study. All lenses displayed a temporal–inferior decentration (x=-0.36±0.29 mm, y=-0.28±0.28 mm, mean ± SD. Compared to the control, a significant inferior decentration was found for the Proclear® MFCL Near lens in both groups (ypresbyopic =-0.26 mm, ynon-presbyopic =-0.70 mm and for the Proclear® MFCL Distance lens in the non-presbyopic group (ynon-presbyopic =-0.69 mm. In both groups, lens-induced vertical coma (C(3, -1 was, by at least tenfold, significantly more positive for the Proclear® MFCL Distance lens and significantly more negative for the Proclear® MFCL Near lens. In the presbyopic group, the correlation of total MFCL decentration with vision variables was weak (r<|0

  8. The Sloan Lens ACS Survey. I. A Large Spectroscopically Selected Sample of Massive Early-Type Lens Galaxies

    Science.gov (United States)

    Bolton, Adam S.; Burles, Scott; Koopmans, Leon V. E.; Treu, Tommaso; Moustakas, Leonidas A.

    2006-01-01

    The Sloan Lens ACS (SLACS) Survey is an efficient Hubble Space Telescope (HST) Snapshot imaging survey for new galaxy-scale strong gravitational lenses. The targeted lens candidates are selected spectroscopically from the Sloan Digital Sky Survey (SDSS) database of galaxy spectra for having multiple nebular emission lines at a redshift significantly higher than that of the SDSS target galaxy. The SLACS survey is optimized to detect bright early-type lens galaxies with faint lensed sources in order to increase the sample of known gravitational lenses suitable for detailed lensing, photometric, and dynamical modeling. In this paper, the first in a series on the current results of our HST Cycle 13 imaging survey, we present a catalog of 19 newly discovered gravitational lenses, along with nine other observed candidate systems that are either possible lenses, nonlenses, or nondetections. The survey efficiency is thus >=68%. We also present Gemini 8 m and Magellan 6.5 m integral-field spectroscopic data for nine of the SLACS targets, which further support the lensing interpretation. A new method for the effective subtraction of foreground galaxy images to reveal faint background features is presented. We show that the SLACS lens galaxies have colors and ellipticities typical of the spectroscopic parent sample from which they are drawn (SDSS luminous red galaxies and quiescent MAIN sample galaxies), but are somewhat brighter and more centrally concentrated. Several explanations for the latter bias are suggested. The SLACS survey provides the first statistically significant and homogeneously selected sample of bright early-type lens galaxies, furnishing a powerful probe of the structure of early-type galaxies within the half-light radius. The high confirmation rate of lenses in the SLACS survey suggests consideration of spectroscopic lens discovery as an explicit science goal of future spectroscopic galaxy surveys.

  9. The lens controls cell survival in the retina: evidence from the blind cavefish Astyanax

    OpenAIRE

    2007-01-01

    The lens influences retinal growth and differentiation during vertebrate eye development but the mechanisms are not understood. The role of the lens in retinal growth and development was studied in the teleost Astyanax mexicanus, which has eyed surface-dwelling (surface fish) and blind cave-dwelling (cavefish) forms. A lens and laminated retina initially develop in cavefish embryos, but the lens dies by apoptosis. The cavefish retina is subsequently disorganized, apoptotic cells appear, the p...

  10. Simulation of Blast Loading on an Ultrastructurally-based Computational Model of the Ocular Lens

    Science.gov (United States)

    2015-10-01

    public release; distribution unlimited The views, opinions and/or findings contained in this report are those of the author(s) and should not be...cells) is stressed by the passing shock wave. Traumatic cataract can result in a partially or fully clouded lens, complete dislo- cation of the lens...CSLM), and type IV collagen ultrastructure in lens capsule using cyro- electron tomography: 6b - On as-received porcine lens capsules, image type IV

  11. Design of an ultraviolet projection lens by using a global search algorithm and computer optimization

    Science.gov (United States)

    Zoric, Nenad; Livshits, Irina; Dilworth, Don; Okishev, Sergey

    2017-02-01

    This paper describes a method for designing an ultraviolet (UV) projection lens for microlithography. Our approach for meeting this objective is to use a starting design automatically obtained by the DSEARCH feature in the SYNOPSYS™ lens design program. We describe the steps for getting a desired starting point for the projection lens and discuss optimization problems unique to this system, where the two parts of the projection lens are designed independently.

  12. N-myc regulates growth and fiber cell differentiation in lens development

    Science.gov (United States)

    Cavalheiro, Gabriel R.; Matos-Rodrigues, Gabriel E.; Zhao, Yilin; Gomes, Anielle L.; Anand, Deepti; Predes, Danilo; de Lima, Silmara; Abreu, Jose G.; Zheng, Deyou; Lachke, Salil A.; Cvekl, Ales; Martins, Rodrigo A. P.

    2017-01-01

    Myc proto-oncogenes regulate diverse cellular processes during development, but their roles during morphogenesis of specific tissues are not fully understood. We found that c-myc regulates cell proliferation in mouse lens development and previous genome-wide studies suggested functional roles for N-myc in developing lens. Here, we examined the role of N-myc in mouse lens development. Genetic inactivation of N-myc in the surface ectoderm or lens vesicle impaired eye and lens growth, while "late" inactivation in lens fibers had no effect. Unexpectedly, defective growth of N-myc--deficient lenses was not associated with alterations in lens progenitor cell proliferation or survival. Notably, N-myc-deficient lens exhibited a delay in degradation of DNA in terminally differentiating lens fiber cells. RNA-sequencing analysis of N-myc--deficient lenses identified a cohort of down-regulated genes associated with fiber cell differentiation that included DNaseIIβ. Further, an integrated analysis of differentially expressed genes in N-myc-deficient lens using normal lens expression patterns of iSyTE, N-myc-binding motif analysis and molecular interaction data from the String database led to the derivation of an N-myc-based gene regulatory network in the lens. Finally, analysis of N-myc and c-myc double-deficient lens demonstrated that these Myc genes cooperate to drive lens growth prior to lens vesicle stage. Together, these findings provide evidence for exclusive and cooperative functions of Myc transcription factors in mouse lens development and identify novel mechanisms by which N-myc regulates cell differentiation during eye morphogenesis. PMID:28716713

  13. Prevention of capsular opacification after accommodative lens refilling surgery in rabbits

    NARCIS (Netherlands)

    Koopmans, Steven A.; Terwee, Thom; van Kooten, Theo G.

    2011-01-01

    Silicone gel-like polymers have been proposed to replace the cataractous lens and therewith restore both vision and accommodation. Lens replacement is associated with opacification of the capsular bag due to the lens epithelial cell response. In this study, the in vivo effectiveness of a 5 min treat

  14. B2045+265 : A new four-image gravitational lens from CLASS

    NARCIS (Netherlands)

    Fassnacht, CD; Blandford, RD; Cohen, JG; Matthews, K; Pearson, TJ; Readhead, ACS; Womble, DS; Myers, ST; Browne, IWA; Jackson, NJ; Marlow, DR; Wilkinson, PN; Koopmans, LVE; de Bruyn, AG; Schilizzi, RT

    1999-01-01

    We have discovered a new gravitational lens in the Cosmic Lens All-Sky Survey (CLASS). The lens B2045+265 is a four-image system with a maximum separation of 1".9. A fifth radio component is detected, but its radio spectrum and its positional coincidence with infrared emission from the lensing galax

  15. Rose-K versus soper contact lens in keratoconus: A randomized comparative trial

    Directory of Open Access Journals (Sweden)

    Raghav Gupta

    2014-01-01

    Conclusion: Both the contact lens designs provide an equal improvement in visual acuity in patients with Keratoconus. However, Rose-K contact lens provides greater comfort, better quality of vision and requires less chair time compared with the Soper lens and hence may possibly have a greater acceptability.

  16. 21 CFR 886.1430 - Ophthalmic contact lens radius measuring device.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ophthalmic contact lens radius measuring device... lens radius measuring device. (a) Identification. An ophthalmic contact lens radius measuring device is an AC-powered device that is a microscope and dial gauge intended to measure the radius of a...

  17. Bacterial Adhesion Forces to Ag-Impregnated Contact Lens Cases and Transmission to Contact Lenses

    NARCIS (Netherlands)

    Qu, Wenwen; Busscher, Henk J.; van der Mei, Henny C.; Hooymans, Johanna M. M.

    2013-01-01

    Purpose: To measure adhesion forces of Pseudomonas aeruginosa, Staphylococcus aureus, and Serratia marcescens to a rigid contact lens (CL), standard polypropylene, and Ag-impregnated lens cases using atomic force microscopy and determine bacterial transmission from lens case to CL. Methods: Adhesion

  18. Temporal properties of the lens eyes of the box jellyfish Tripedalia cystophora

    DEFF Research Database (Denmark)

    O'Connor, Megan; Nilsson, Dan-E; Garm, Anders Lydik

    2010-01-01

    Box jellyWsh (Cubomedusae) are visually orientating animals which posses a total of 24 eyes of 4 morphological types; 2 pigment cup eyes (pit eye and slit eye) and 2 lens eyes [upper lens-eye (ule) and lower lens-eye (lle)]. In this study, we use electroretinograms (ERGs) to explore temporal prop...

  19. plasma treatment

    Directory of Open Access Journals (Sweden)

    Puač Nevena

    2014-11-01

    Full Text Available In this paper we will present results for plasma sterilization of planktonic samples of two reference strains of bacteria, Pseudomonas aeruginosa ATCC 27853 and Enterococcus faecalis ATCC 29212. We have used a plasma needle as a source of non-equilibrium atmospheric plasma in all treatments. This device is already well characterized by OES, derivative probes and mass spectrometry. It was shown that power delivered to the plasma is bellow 2 W and that it produces the main radical oxygen and nitrogen species believed to be responsible for the sterilization process. Here we will only present results obtained by electron paramagnetic resonance which was used to detect the OH, H and NO species. Treatment time and power delivered to the plasma were found to have the strongest influence on sterilization. In all cases we have observed a reduction of several orders of magnitude in the concentration of bacteria and for the longest treatment time complete eradication. A more efficient sterilization was achieved in the case of gram negative bacteria.

  20. Plasma metallization

    CERN Document Server

    Crowther, J M

    1997-01-01

    Many methods are currently used for the production of thin metal films. However, all of these have drawbacks associated with them, for example the need for UHV conditions, high temperatures, exotic metal precursors, or the inability to coat complex shaped objects. Reduction of supported metal salts by non-isothermal plasma treatment does not suffer from these drawbacks. In order to produce and analyse metal films before they become contaminated, a plasma chamber which could be attached directly to a UHV chamber with XPS capability was designed and built. This allowed plasma treatment of supported metal salts and surface analysis by XPS to be performed without exposure of the metal film to the atmosphere. Non-equilibrium plasma treatment of Nylon 66 supported gold(lll) chloride using hydrogen as the feed gas resulted in a 95% pure gold film, the remaining 5% of the film being carbon. If argon or helium were used as the feed gases during plasma treatment the resultant gold films were 100% pure. Some degree of s...

  1. New features in MADX thin-lens tracking module

    CERN Document Server

    Sun, YP; CERN. Geneva. BE Department

    2010-01-01

    In this note, we introduce several new features of the MADX thin-lens tracking module, which include the new element AC dipole, the new feature ‘NOISE’attached to the class ‘multipole’, and the offset of the ‘aperture’ model. We also present simulation results for the benchmark between different codes, and some applications with examples.

  2. New features in MADX thin-lens tracking module

    CERN Document Server

    Sun, Y; CERN. Geneva. BE Department

    2010-01-01

    In this note, we introduce several new features of the MADX thin-lens tracking module, which include the new element AC dipole, the new feature ‘NOISE’ attached to the class ‘multipole’, and the offset of the ‘aperture’ model. We also present simulation results for the benchmark between different codes, and some applications with examples.

  3. Impedance of goat eye lens at different DC voltages.

    Science.gov (United States)

    Kohli, K S; Rai, D V; Jindal, V K; Goyal, N

    1998-09-01

    A computer assisted AC impedance system is used to measure the DC voltage-current (V-I) characteristics and AC impedance of a goat eye lens using a two-probe Ag-AgCl electrode system. The measurement of the V-I characteristics shows that when a DC voltage from 0 mV to 30 mV is applied, the resultant current decreases from an initial value of 0.58 microA to 0.006 microA. However, when the voltage is increases beyond 30 mV, the current increases and reaches a value of 0.9 microA at 100 mV. The data on the frequency response (0.01-10 Hz) of the impedance of lens tissue show an inverse relationship with frequency. The effect of various DC voltages, namely 0, 30, 50, 100 and 200 mV, on the impedance of the eye lens is also investigated over a frequency range of 0.01-10 Hz. The measurement results for both V-I characteristics and AC impedance further suggest the presence of a 30 mV voltage compartment in the goat eye lens.

  4. Liquid-crystal intraocular adaptive lens with wireless control.

    Science.gov (United States)

    Simonov, Aleksey N; Vdovin, Gleb; Loktev, Mikhail

    2007-06-11

    We present a prototype of an adaptive intraocular lens based on a modal liquid-crystal spatial phase modulator with wireless control. The modal corrector consists of a nematic liquid-crystal layer sandwiched between two glass substrates with transparent low- and high-ohmic electrodes, respectively. Adaptive correction of ocular aberrations is achieved by changing the amplitude and the frequency of the applied control voltage. The convex-shaped glass substrates provide the required initial focusing power of the lens. A loop antenna mounded on the rim of the lens delivers an amplitude-modulated radio-frequency control signal to the integrated rectifier circuit that drives the liquid-crystal modal corrector. In vitro measurements of a 5-mm clear aperture prototype with an initial focusing power of +12.5 diopter, remotely driven by a radio-frequency control unit at ~6 MHz, were carried out using a Shack-Hartmann wavefront sensor. The lens based on a 40-mum thick liquid-crystal layer allows for an adjustable defocus of 4 waves, i. e. an accommodation of ~2.51 dioptres at a wavelength of 534 nm, and correction of spherical aberration coefficient ranging from -0.8 to 0.67 waves. Frequency-switching technique was employed to increase the response speed and eliminate transient overshoots in aberration coefficients. The full-scale settling time of the adaptive modal corrector was measured to be ~4 s.

  5. Gravitational lens modelling in a citizen science context

    CERN Document Server

    Küng, Rafael; More, Anupreeta; Baeten, Elisabeth; Coles, Jonathan; Cornen, Claude; Macmillan, Christine; Marshall, Phil; More, Surhud; Odermatt, Jonas; Verma, Aprajita; Wilcox, Julianne K

    2015-01-01

    We develop a method to enable collaborative modelling of gravitational lenses and lens candidates, that could be used by non-professional lens enthusiasts. It uses an existing free-form modelling program (glass), but enables the input to this code to be provided in a novel way, via a user-generated diagram that is essentially a sketch of an arrival-time surface. We report on an implementation of this method, SpaghettiLens, which has been tested in a modelling challenge using 29 simulated lenses drawn from a larger set created for the Space Warps citizen science strong lens search. We find that volunteers from this online community asserted the image parities and time ordering consistently in some lenses, but made errors in other lenses depending on the image morphology. While errors in image parity and time ordering lead to large errors in the mass distribution, the enclosed mass was found to be more robust: the model-derived Einstein radii found by the volunteers were consistent with those produced by one of...

  6. Adjusting to a sudden “aging” of the lens.

    Science.gov (United States)

    Tregillus, Katherine E M; Werner, John S; Webster, Michael A

    2016-03-01

    Color perception is known to remain largely stable across the lifespan despite the pronounced changes in sensitivity from factors such as the progressive brunescence of the lens. However, the mechanisms and timescales controlling these compensatory adjustments are still poorly understood. In a series of experiments, we tracked adaptation in observers after introducing a sudden change in lens density by having observers wear glasses with yellow filters that approximated the average spectral transmittance of a 70-year-old lens. Individuals were young adults and wore the glasses for 5 days for 8 h per day while engaged in their normal activities. Achromatic settings were measured on a CRT before and after each daily exposure with the lenses on and off, and were preceded by 5 min of dark adaptation to control for short-term chromatic adaptation. During each day, there was a large shift in the white settings consistent with a partial compensation for the added lens density. However, there was little to no evidence of an afterimage at the end of each daily session, and participants’ perceptual nulls were roughly aligned with the nulls for short-term chromatic adaptation, suggesting a rapid renormalization when the lenses were removed. The long-term drift was also extinguished by brief exposure to a white adapting field. The results point to distinct timescales and potentially distinct mechanisms compensating for changes in the chromatic sensitivity of the observer.

  7. Lightweight Inexpensive Ozone Lidar Telescope Using a Plastic Fresnel Lens

    Science.gov (United States)

    DeYoung, Russell J.; Notari, Anthony; Carrion, William; Pliutau, Denis

    2014-01-01

    An inexpensive lightweight ozone lidar telescope was designed, constructed and operated during an ozone lidar field campaign. This report summarizes the design parameters and performance of the plastic Fresnel lens telescope and shows the ozone lidar performance compared to Zemax calculations.

  8. Portraying Monsters: Framing School Bullying through a Macro Lens

    Science.gov (United States)

    Horton, Paul

    2016-01-01

    This article critically considers the discourse on school bullying through the conceptual framework of lenses and argues that a macro lens has been utilised by school bullying researchers to bring into focus the characteristics of the individuals involved and the types of actions used. By considering earlier understandings of bullying, the article…

  9. The Netherlands and the Gülen movement

    NARCIS (Netherlands)

    van Bruinessen, Martin

    2014-01-01

    The Gülen movement has been active among immigrant workers from Turkey in the Netherlands since the 1980s. Its first institutions—educational centers, boarding houses, schools, business associations—were established when a (partly) Dutch-educated second generation came to adulthood in the mid-1990s.

  10. Foldable Lens Explantation and Exchange:The Reason and Solution

    Institute of Scientific and Technical Information of China (English)

    Danying Zheng; Zhenpin Zhang; Wenhui Yang; Weirong Chen

    2001-01-01

    Objective: To report the explantation and exchange of Hydrophilic Acrylic foldable intraocular lens (IOL) on 14 patients who had visual disturbances caused by the change of transparence on optic. Methods: Sixteen Hydrophilic Acrylic foldable intraocular lenses from 14 patients who presented with decreased visual acuity from 6 months to 1 year after normal phacoemulsification and IOL implantation associated with extensive transparent change on optic of the lens. The lenses were explanted with the bisection technique. All the eyes were reinserted with Acrysof foldable lenses. Results: Sixteen lenses were removed successfully and exchanged with the new lens in the capsule. The posterior capsular rupture and vitreous loss were found in the first two cases. One of them had the zonulysis due to the radial tear of the anterior capsule during the enlargement of the capsular opening. The anterior vitrectomy was performed with IOL fixed on the ciliary sulcus. The visual acuity of all the patients improved obviously without posterior complication. Conclusion: Foldable lens explantation with the bisection technique and exchange had a successful outcome with improvement of ocular condition. Eye science 2001; 17:54 ~56.

  11. Holographic Lens for Pilot’s Head-Up Display

    Science.gov (United States)

    1976-02-01

    corners is thought to be a limitation imposed by the present relay lens design rather than a property of the holographic element. The effective f...conclusion is partiidly misleading, in that Figuras 33a and 33b represent only those fans traced along the x and y axes of the pupil; no in-fornia- tion

  12. Some topological properties of the Inverse Lens Mapping

    Energy Technology Data Exchange (ETDEWEB)

    Mediavilla, T; Ariza, O [Departamento de Estadistica e Investigacion Operativa, Universidad de Cadiz, Avda de Ramon Puyol, s/n 11202 Algeciras (Spain); Mediavilla, E; Oscoz, A [Instituto de Astrofisica de Canarias, Avda Via Lactea s/n, La Laguna (Spain); Munoz, J A, E-mail: teresa.mediavilla@ca.uca.es, E-mail: octavio.ariza@uca.es, E-mail: emg@iac.es, E-mail: jmunoz@uv.es, E-mail: aoscoz@iac.es [Departamento de Astronomia y Astrofisica, Universidad de Valencia, c/ Dr. Moliner, 50, 46100 Burjassot (Spain)

    2011-09-22

    Away from critical curves, lens mapping can be seen as a linear invertible transformation of the plane even for regions (cells) of relatively large size. However, close to critical curves the departures from linearity can be very strong. We discuss the topological problems induced by the mapping of regions of the image plane that include critical curves (critical cells).

  13. Electrostatic afocal-zoom lens design using computer optimization technique

    Energy Technology Data Exchange (ETDEWEB)

    Sise, Omer, E-mail: omersise@gmail.com

    2014-12-15

    Highlights: • We describe the detailed design of a five-element electrostatic afocal-zoom lens. • The simplex optimization is used to optimize lens voltages. • The method can be applied to multi-element electrostatic lenses. - Abstract: Electron optics is the key to the successful operation of electron collision experiments where well designed electrostatic lenses are needed to drive electron beam before and after the collision. In this work, the imaging properties and aberration analysis of an electrostatic afocal-zoom lens design were investigated using a computer optimization technique. We have found a whole new range of voltage combinations that has gone unnoticed until now. A full range of voltage ratios and spherical and chromatic aberration coefficients were systematically analyzed with a range of magnifications between 0.3 and 3.2. The grid-shadow evaluation was also employed to show the effect of spherical aberration. The technique is found to be useful for searching the optimal configuration in a multi-element lens system.

  14. On subwavelength imaging with Maxwell's fish eye lens

    CERN Document Server

    Sun, Fei

    2010-01-01

    Both explicit analysis and FEM numerical simulation are used to analyze the field distribution of a line current in the so-called Maxwell's fish eye lens [bounded with a perfectly electrical conductor (PEC) boundary]. We show that such a 2D Maxwell's fish eye lens cannot give perfect imaging due to the fact that high order modes of the object field can hardly reach the image point in Maxwell's fish eye lens. If only zeroth order mode is excited, a subwavelength image of a sharp object may be achieved in some cases, however, its spot-size is larger than the spot size of the initial object field. The image resolution is determined by the field spot size of the image corresponding to the zeroth order component of the object field. Our explicit analysis consists very well with the FEM results for a fish eye lens. Time-domain simulation is also given to verify our conclusion. Multi-point imaging for a single object point is also demonstrated.

  15. Can Maxwell's fish eye lens really give perfect imaging?

    CERN Document Server

    Sun, Fei

    2010-01-01

    Both explicit analysis and FEM numerical simulation are used to analyze the field distribution of a line current in the so-called Maxwell's fish eye lens [bounded with a perfectly electrical conductor (PEC) boundary]. We show that such a 2D Maxwell's fish eye lens cannot give perfect imaging due to the fact that high order modes of the object field can hardly reach the image point in Maxwell's fish eye lens. If only zeroth order mode is excited, a good image of a sharp object may be achieved in some cases, however, its spot-size is larger than the spot size of the initial object field. The image resolution is determined by the field spot size of the image corresponding to the zeroth order component of the object field. Our explicit analysis consists very well with the FEM results for a fish eye lens. Time-domain simulation is also given to verify our conclusion. Multi-point images for a single object point are also demonstrated.

  16. Combined aniridic intraocular lens implantation and vitreoretinal surgery

    Directory of Open Access Journals (Sweden)

    Mehta Hitendra

    2007-01-01

    Full Text Available A 45-year-old man presented with post-traumatic aniridia. We describe the combined surgery done to treat both aniridia and epiretinal membrane simultaneously. A combined aniridia intraocular lens and vitreoretinal surgery was done. The case report highlights the advantage of combined surgery in terms of cost factor and surgical time.

  17. Posterior Iris Fixated Intraocular Lens for Pediatric Traumatic Cataract

    Science.gov (United States)

    Kavitha, V.; Balasubramanian, Preethi; Heralgi, Mallikarjun M.

    2016-01-01

    Purpose: To evaluate the postoperative visual outcomes and complications of posterior iris fixated intraocular lens (IFIOL) implantation for pediatric traumatic cataract. Methods: A retrospective clinical audit was performed of all the pediatric traumatic cataract patients who underwent lens removal and iris fixated lens implantation due to inadequate capsular support with or without corneal tear repair between January 2009 and December 2013. Data were collected and analyzed on the preoperative and postoperative visual outcomes and complications. Results: Twenty-five children (25 eyes; 21 males and 4 females) were enrolled with the mean age of 11 ± 4.0 years. There were 72% of eyes that underwent primary cataract removal with IFIOL implantation. Twenty-eight percent of eyes underwent corneal tear repair prior to intraocular lens (IOL) implantation. Preoperative best corrected visual acuity (BCVA) was hand motion in 32% eyes, counting fingers in 24%, and perception of light in 44%. Postoperative BCVA of 0-0.2 logarithm of minimum angle of resolution was reported in the 64% of eyes. One eye developed secondary glaucoma, one eye underwent re-enclavation, and none developed retinal complications. Conclusion: Posterior IFIOL implantation resulted in an improved visual outcome, low incidence of postoperative complications, and is a good alternative to other IOL, in the cases of pediatric traumatic cataract without adequate capsular support. PMID:27162456

  18. Microscopic and spectroscopic investigation of an explanted opacified intraocular lens

    Science.gov (United States)

    Simon, V.; Radu, T.; Vulpoi, A.; Rosca, C.; Eniu, D.

    2015-01-01

    The investigated polymethylmethacrylate intraocular lens explanted an year after implantation presented a fine granularity consisting of ring-like grains of about 15 μm in diameter. In order to evidence the changes occurred on intraocular lens relative to morphology, elemental composition and atomic environments, microscopic and spectroscopic analyses were carried out using scanning electron microscopy (SEM), Fourier transform infrared (FTIR), energy-dispersive X-ray (EDS), and X-ray photoelectron (XPS) spectroscopies. The results revealed that the grains contain hydroxyapatite mineral phase. A protein layer covers the lens both in opacified and transparent zones. The amide II band is like in basal epithelial cells. The shape and size of the grains, and the XPS depth profiling results indicate the possibility of a cell-mediated process involving lens epithelial cells which fagocitated apoptotic epithelial cells, and in which the debris derived from cell necrosis were calcified. To the best of our knowledge, this is the first investigation on explanted intraocular lenses using XPS depth profiling in order to examine the inside of the opacifying deposits.

  19. Changes in the Eye Microbiota Associated with Contact Lens Wearing

    Directory of Open Access Journals (Sweden)

    Hakdong Shin

    2016-03-01

    Full Text Available Wearing contact lenses has been identified as a risk factor for the development of eye conditions such as giant papillary conjunctivitis and keratitis. We hypothesized that wearing contact lenses is associated with changes in the ocular microbiota. We compared the bacterial communities of the conjunctiva and skin under the eye from 58 subjects and analyzed samples from 20 subjects (9 lens wearers and 11 non-lens wearers taken at 3 time points using a 16S rRNA gene-based sequencing technique (V4 region; Illumina MiSeq. We found that using anesthetic eye drops before sampling decreases the detected ocular microbiota diversity. Compared to those from non-lens wearers, dry conjunctival swabs from lens wearers had more variable and skin-like bacterial community structures (UniFrac; P value = 3.0. The results indicate that wearing contact lenses alters the microbial structure of the ocular conjunctiva, making it more similar to that of the skin microbiota. Further research is needed to determine whether the microbiome structure provides less protection from ocular infections.

  20. Interdisciplinarity as a Lens for Theorizing Language/Content Partnerships

    Science.gov (United States)

    Paretti, Marie C.

    2011-01-01

    The paper employs interdisciplinarity as a theoretical lens for describing meaningful content/ language partnerships and establishing an ontology for such partnerships. Interdisciplinary collaboration, as defined by scholars, entails the integration of knowledge across domains and the clear valuing of all contributors in addressing an issue…