WorldWideScience

Sample records for plasma biological product

  1. Gas Plasma Surface Chemistry for Biological Assays.

    Science.gov (United States)

    Sahagian, Khoren; Larner, Mikki

    2015-01-01

    Biological systems respond to and interact with surfaces. Gas plasma provides a scalable surface treatment method for designing interactive surfaces. There are many commercial examples of plasma-modified products. These include well plates, filtration membranes, dispensing tools, and medical devices. This chapter presents an overview of gas plasma technology and provides a guide to using gas plasma for modifying surfaces for research or product development.

  2. Biologic variability in plasma glucose, hemoglobin A1c, and advanced glycation end products associated with diabetes complications.

    Science.gov (United States)

    Leslie, R David G; Cohen, Robert M

    2009-07-01

    Plasma glucose plays a key role in the complications of diabetes mellitus. Hemoglobin A1c (HbA1c) and circulating concentrations of advanced glycation end products (AGEs) are central to diabetes clinical care and pathophysiology. However, there is evidence for variation between individuals in the relationship of plasma glucose to both these measures and to specific complications. The glycation gap (GG) and hemoglobin glycation index represent tools for quantitating the variability in the relationship between plasma glucose and HbA1c useful for identification of underlying mechanisms. Recent evidence demonstrates the heritability of HbA1c, the GG, and AGEs, yet not of glycated serum proteins. There has been tremendous effort devoted to identifying the heritable basis of types 1 and 2 diabetes; however, studies on the heritable contributors to these mediators of glucose effect on complications are only beginning. New evidence for normal biologic variation in the distribution of glucose into the red blood cell (RBC) intracellular compartment and RBC lifespan in people with and without diabetes represent candidates for heritable mechanisms and contributors to the rise in HbA1c with age. Taken as a whole, genetic and mechanistic evidence suggests new potential targets for complications prevention and improvement in complications risk estimation. These observations could help tilt the risk-benefit balance in glycemic control toward a more beneficial outcome.

  3. Establishing the "Biological Relevance" of Dipentyl Phthalate Reductions in Fetal Rat Testosterone Production and Plasma and Testis Testosterone Levels.

    Science.gov (United States)

    Gray, Leon Earl; Furr, Johnathan; Tatum-Gibbs, Katoria R; Lambright, Christy; Sampson, Hunter; Hannas, Bethany R; Wilson, Vickie S; Hotchkiss, Andrew; Foster, Paul M D

    2016-01-01

    Phthalate esters (PEs) constitute a large class of compounds that are used for many consumer product applications. Many of the C2-C7 di-ortho PEs reduce fetal testicular hormone and gene expression levels in rats resulting in adverse effects seen later in life but it appears that relatively large reductions in fetal testosterone (T) levels and testis gene expression may be required to adversely affect reproductive development (Hannas, B. R., Lambright, C. S., Furr, J., Evans, N., Foster, P. M., Gray, E. L., and Wilson, V. S. (2012). Genomic biomarkers of phthalate-induced male reproductive developmental toxicity: a targeted RT-PCR array approach for defining relative potency. Toxicol. Sci. 125, 544-557). The objectives of this study were (1) to model the relationships between changes in fetal male rat plasma testosterone (PT), T levels in the testis (TT), T production (PROD), and testis gene expression with the reproductive malformation rates, and (2) to quantify the "biologically relevant reductions" (BRRs) in fetal T necessary to induce adverse effects in the offspring. In the fetal experiment, Harlan Sprague-Dawley rats were dosed with dipentyl phthalate (DPeP) at 0, 11, 33, 100, and 300 mg/kg/day from gestational days (GD) 14-18 and fetal testicular T, PT levels, and T Prod and gene expression were assessed on GD 18. In the postnatal experiment, rats were dosed with DPeP from GD 8-18 and reproductive development was monitored through adulthood. The dose-response curves for TT levels (ED(50) = 53 mg/kg) and T PROD (ED(50) = 45 mg/kg) were similar, whereas PT was reduced at ED50 = 19 mg/kg. When the reductions in TPROD and Insl3 mRNA were compared with the postnatal effects of in utero DPeP, dose-related reproductive alterations were noted when T PROD and Insl3 mRNA were reduced by >45% and 42%, respectively. The determination of BRR levels may enable risk assessors to utilize fetal endocrine data to help establish points of departure for

  4. Biological hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Benemann, J.R. [Univ. of California, Berkeley, CA (United States)

    1995-11-01

    Biological hydrogen production can be accomplished by either thermochemical (gasification) conversion of woody biomass and agricultural residues or by microbiological processes that yield hydrogen gas from organic wastes or water. Biomass gasification is a well established technology; however, the synthesis gas produced, a mixture of CO and H{sub 2}, requires a shift reaction to convert the CO to H{sub 2}. Microbiological processes can carry out this reaction more efficiently than conventional catalysts, and may be more appropriate for the relatively small-scale of biomass gasification processes. Development of a microbial shift reaction may be a near-term practical application of microbial hydrogen production.

  5. FDA 101: Regulating Biological Products

    Science.gov (United States)

    ... animal, and microorganism—and may be produced by biotechnology methods. Gene-based and cellular biologics, at the ... other categories of biological products mostly produced by biotechnology methods, including: monoclonal antibodies designed as targeted therapies ...

  6. EDITORIAL: Gas plasmas in biology and medicine

    Science.gov (United States)

    Stoffels, Eva

    2006-08-01

    It is my great pleasure to introduce this special cluster devoted to recent developments in biomedical plasma technology. It is an even greater pleasure to behold the enormous progress which has been made in this area over the last five years. Research on biomedical plasma applications proceeds hand in hand with the development of new material processing technologies, based on atmospheric plasma sources. In the beginning, major research effort was invested in the development and control of new plasma sources—in this laborious process, novel devices were constructed and characterized, and also new plasma physical phenomena were discovered. Self-constriction of micro-plasmas, pattern formation, filamentation of glow discharges and various mode transitions are just a few examples. It is a real challenge for theorists to gain an understanding of these complex phenomena. Later, the devices had to be thoroughly tested and automated, and various safety issues had to be addressed. At present, many atmospheric plasma sources are ready to use, but not all fundamental and technical problems have been resolved by far. There is still plenty of room for improvement, as in any dynamic area of research. The recent trends are clear: the application area of plasmas expands into processing of unconventional materials such as biological scaffolds, and eventually living human, animal and plant tissues. The gentle, precise and versatile character of cold plasmas simply invites this new application. Firstly, non-living surfaces have been plasma-treated to attain desired effects in biomedical research; tissue engineering will soon fully profit from this powerful technique. Furthermore, studies on cultured plant and animal cells have provided many findings, which are both fundamentally interesting and potentially applicable in health care, veterinary medicine and agriculture. The most important and hitherto unique property of plasma treatment is that it can evade accidental cell death

  7. [Transfusion of plasma: products-indications].

    Science.gov (United States)

    Djoudi, R

    2013-05-01

    The use of therapeutic plasma has increased in France by more than 40% since 2002. This growth may be explained by the improvement in transfusion safety, the diminution of the risk of transmission of pathogens and the regained confidence of the physicians in blood products. Therapeutic plasma also benefits from additional procedures to reduce infectious (securisation) or immunological risks (selection of blood donors). Its application in massive transfusions has undergone a significant evolution over the last few years. A proactive attitude favouring early and important use of plasma on the basis of pre-established protocols is advocated henceforth. The prescription of therapeutic plasma for other indications must be guided by the results of biological tests and an evaluation of the haemorrhagic risk. Despite regular updating of the guidelines for good transfusion practice, plasma is still sometimes prescribed for prophylactic purposes in situations where the biological and/or clinical criteria do not justify it. Moreover, it is not recommended to use fresh frozen plasma in cases of deficiency of coagulation factors if the specific concentrates are available as intravenous fluids. Complementary clinical studies will be necessary to evaluate, in certain indications, the real benefits of the transfusion of plasma and the interest of replacing it by concentrates of coagulant factors (fibrinogen, prothrombin complex).

  8. Plankton Production Biology

    Science.gov (United States)

    2005-09-30

    information if it does not display a currently valid OMB control number. 1. REPORT DATE 30 SEP 2005 2. REPORT TYPE 3. DATES COVERED 00-00-2005 to 00-00... Crustacea ), the group that contributes the major part of the biomass of zooplankton collected with plankton nets in salt- and freshwater. The basis of...windows to the large Russian-language marine- biological literature by publishing this translation. The observations are not subject to becoming outdated

  9. Natural products in chemical biology

    National Research Council Canada - National Science Library

    Civjan, Natanya

    2012-01-01

    "Based on the award winning Wiley Encyclopedia of Chemical Biology, this book provides a general overview of the unique features of the small molecules referred to as "natural products", explores how...

  10. Synthetic Biology Guides Biofuel Production

    Science.gov (United States)

    Connor, Michael R.; Atsumi, Shota

    2010-01-01

    The advancement of microbial processes for the production of renewable liquid fuels has increased with concerns about the current fuel economy. The development of advanced biofuels in particular has risen to address some of the shortcomings of ethanol. These advanced fuels have chemical properties similar to petroleum-based liquid fuels, thus removing the need for engine modification or infrastructure redesign. While the productivity and titers of each of these processes remains to be improved, progress in synthetic biology has provided tools to guide the engineering of these processes through present and future challenges. PMID:20827393

  11. Synthetic Biology Guides Biofuel Production

    Directory of Open Access Journals (Sweden)

    Michael R. Connor

    2010-01-01

    Full Text Available The advancement of microbial processes for the production of renewable liquid fuels has increased with concerns about the current fuel economy. The development of advanced biofuels in particular has risen to address some of the shortcomings of ethanol. These advanced fuels have chemical properties similar to petroleum-based liquid fuels, thus removing the need for engine modification or infrastructure redesign. While the productivity and titers of each of these processes remains to be improved, progress in synthetic biology has provided tools to guide the engineering of these processes through present and future challenges.

  12. Biological hydrogen production from phytomass

    Energy Technology Data Exchange (ETDEWEB)

    Bartacek, J.; Zabranska, J. [Inst. of Chemical Technology, Prague (Czech Republic). Dept. of Water Technology and Environmental Engineering

    2004-07-01

    Renewable sources of energy have received wide attention lately. One candidate is hydrogen which has the added advantage of involving no greenhouse gases. Biological hydrogen production from wastewater or biowastes is a very attractive production technique. So far, most studies have concentrated on the use of photosynthetic bacteria. However, dark fermentation has recently become a popular topic of research as it has the advantage of not requiring light energy input, something that limits the performance of the photosynthetic method. While pure cultures have been used in most of the investigations to date, in industrial situations mixed cultures will probably be the norm because of unavoidable contamination. In this investigation the phytomass of amaranth (Amaranthus cruentus L) was used to produce hydrogen. Specific organic loading, organic loading, and pH were varied to study the effect on hydrogen production. 18 refs., 1 tab., 6 figs.

  13. All Plasma Products Are Not Created Equal: Characterizing Differences Between Plasma Products

    Science.gov (United States)

    2015-06-01

    products that may affect efficacy and safety. METHODS: Four different plasma products were analyzed to include fresh frozen plasma (FFP), liquid plasma...have come onto the market. FFP, plasma frozen at 24 hours (PF-24), and liquid plasma (LP) are single-donor products pre- pared by separating plasma from...Transfusion. 2004;44(11):1674Y1675. 2. American Association of Blood Banks . Standards for Blood Banks and Transfusion Services. 26th ed. Bethesda, MD

  14. Range of fractionated plasma products to optimize plasma resources

    Institute of Scientific and Technical Information of China (English)

    Thierry Burnouf

    2010-01-01

    @@ HUMAN PLASMA is a source material that is crucial for the production of unique therapeutic fractionated products. Indeed, plasma contains hundreds of proteins ensuring many physiological functions. The most abun-dant proteins, albumin and immunoglobulin G (IgG) ,are present at about 35 and 10 g/L,respectively,repre-senting about 80% of all plasma proteins. However,other important therapeutic proteins include the coagu-lation factors (factor Ⅷ (F Ⅷ) ; FIX ; Von Willebrand Factor (VWF), fibrinogen) various protease inhibitors (alpha 1-antitrypsin ; antithrombin; C1-esterase) and anticoagulants (protein C) which exhibit potent physi-ological activity.

  15. Rapid enzymatic degradation of growth hormone-releasing hormone by plasma in vitro and in vivo to a biologically inactive product cleaved at the NH2 terminus.

    OpenAIRE

    Frohman, L A; Downs, T. R.; Williams, T C; Heimer, E P; Pan, Y C; Felix, A M

    1986-01-01

    The effect of plasma on degradation of human growth hormone-releasing hormone (GRH) was examined in vitro and in vivo using high performance liquid chromatography (HPLC), radioimmunoassay (RIA), and bioassay. When GRH(1-44)-NH2 was incubated with human plasma, the t1/2 of total GRH immunoreactivity was 63 min (RIA). However, HPLC revealed a more rapid disappearance (t1/2, 17 min) of GRH(1-44)-NH2 that was associated with the appearance of a less hydrophobic but relatively stable peptide that ...

  16. Isolation of biologically-active exosomes from human plasma.

    Science.gov (United States)

    Muller, Laurent; Hong, Chang-Sook; Stolz, Donna B; Watkins, Simon C; Whiteside, Theresa L

    2014-09-01

    Effects of exosomes present in human plasma on immune cells have not been examined in detail. Immunological studies with plasma-derived exosomes require their isolation by procedures involving ultracentrifugation. These procedures were largely developed using supernatants of cultured cells. To test biologic activities of plasma-derived exosomes, methods are necessary that ensure adequate recovery of exosome fractions free of contaminating larger vesicles, cell fragments and protein/nucleic acid aggregates. Here, an optimized method for exosome isolation from human plasma/serum specimens of normal controls (NC) or cancer patients and its advantages and pitfalls are described. To remove undesirable plasma-contaminating components, ultrafiltration of differentially-centrifuged plasma/serum followed by size-exclusion chromatography prior to ultracentrifugation facilitated the removal of contaminants. Plasma or serum was equally acceptable as a source of exosomes based on the recovered protein levels (in μg protein/mL plasma) and TEM image quality. Centrifugation on sucrose density gradients led to large exosome losses. Fresh plasma was the best source of morphologically-intact exosomes, while the use of frozen/thawed plasma decreased exosome purity but not their biologic activity. Treatments of frozen plasma with DNAse, RNAse or hyaluronidase did not improve exosome purity and are not recommended. Cancer patients' plasma consistently yielded more isolated exosomes than did NCs' plasma. Cancer patients' exosomes also mediated higher immune suppression as evidenced by decreased CD69 expression on responder CD4+ T effector cells. Thus, the described procedure yields biologically-active, morphologically-intact exosomes that have reasonably good purity without large protein losses and can be used for immunological, biomarker and other studies.

  17. Quantum dynamics of biological systems and dust plasma nanoparticles

    Science.gov (United States)

    Lasukov, V. V.; Lasukova, T. V.; Lasukova, O. V.

    2012-12-01

    A quantum solution of the Fisher-Kolmogorov-Petrovskii-Piskunov equation with convection and linear diffusion is obtained which can provide the basis for the quantum biology and quantum microphysics equation. On this basis, quantum emission of biological systems, separate microorganisms (cells or bacteria), and dust plasma particles is investigated.

  18. 9 CFR 114.4 - Identification of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Identification of biological products... REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.4 Identification of biological products. Suitable tags or labels of... biological products, all component parts to be combined to form a biological product, all......

  19. Synthetic biology advances for pharmaceutical production

    Science.gov (United States)

    Breitling, Rainer; Takano, Eriko

    2015-01-01

    Synthetic biology enables a new generation of microbial engineering for the biotechnological production of pharmaceuticals and other high-value chemicals. This review presents an overview of recent advances in the field, describing new computational and experimental tools for the discovery, optimization and production of bioactive molecules, and outlining progress towards the application of these tools to pharmaceutical production systems. PMID:25744872

  20. Simulating plasma production from hypervelocity impacts

    Science.gov (United States)

    Fletcher, Alex; Close, Sigrid; Mathias, Donovan

    2015-09-01

    Hypervelocity particles, such as meteoroids and space debris, routinely impact spacecraft and are energetic enough to vaporize and ionize themselves and as well as a portion of the target material. The resulting plasma rapidly expands into the surrounding vacuum. While plasma measurements from hypervelocity impacts have been made using ground-based technologies such as light gas guns and Van de Graaff dust accelerators, some of the basic plasma properties vary significantly between experiments. There have been both ground-based and in-situ measurements of radio frequency (RF) emission from hypervelocity impacts, but the physical mechanism responsible and the possible connection to the impact-produced plasma are not well understood. Under certain conditions, the impact-produced plasma can have deleterious effects on spacecraft electronics by providing a new current path, triggering an electrostatic discharge, causing electromagnetic interference, or generating an electromagnetic pulse. Multi-physics simulations of plasma production from hypervelocity impacts are presented. These simulations incorporate elasticity and plasticity of the solid target, phase change and plasma formation, and non-ideal plasma physics due to the high density and low temperature of the plasma. A smoothed particle hydrodynamics method is used to perform a continuum dynamics simulation with these additional physics. By examining a series of hypervelocity impacts, basic properties of the impact produced plasma plume (density, temperature, expansion speed, charge state) are determined for impactor speeds between 10 and 72 km/s. For a large range of higher impact speeds (30-72 km/s), we find the temperature is unvarying at 2.5 eV. We also find that the plasma plume is weakly ionized for impact speeds less than 14 km/s and fully ionized for impact speeds greater than 20 km/s, independent of impactor mass. This is the same velocity threshold for the detection of RF emission in recent Van de Graaff

  1. Plasma processing methods for hydrogen production

    Science.gov (United States)

    Mizeraczyk, Jerzy; Jasiński, Mariusz

    2016-08-01

    In the future a transfer from the fossil fuel-based economy to hydrogen-based economy is expected. Therefore the development of systems for efficient H2 production becomes important. The several conventional methods of mass-scale (or central) H2 production (methane, natural gas and higher hydrocarbons reforming, coal gasification reforming) are well developed and their costs of H2 production are acceptable. However, due to the H2 transport and storage problems the small-scale (distributed) technologies for H2 production are demanded. However, these new technologies have to meet the requirement of producing H2 at a production cost of (1-2)/kg(H2) (or 60 g(H2)/kWh) by 2020 (the U.S. Department of Energy's target). Recently several plasma methods have been proposed for the small-scale H2 production. The most promising plasmas for this purpose seems to be those generated by gliding, plasmatron and nozzle arcs, and microwave discharges. In this paper plasma methods proposed for H2 production are briefly described and critically evaluated from the view point of H2 production efficiency. The paper is aiming at answering a question if any plasma method for the small-scale H2 production approaches such challenges as the production energy yield of 60 g(H2)/kWh, high production rate, high reliability and low investment cost. Contribution to the topical issue "6th Central European Symposium on Plasma Chemistry (CESPC-6)", edited by Nicolas Gherardi, Ester Marotta and Cristina Paradisi

  2. Microwave Plasma Production of Metal Nanopowders

    Directory of Open Access Journals (Sweden)

    Joseph Lik Hang Chau

    2014-06-01

    Full Text Available Metal and metal alloy nanopowders were prepared by using the microwave plasma synthesis method. The microwave plasma was operated in atmospheric pressure at a frequency of 2.45 GHz. The precursor decomposed thermally in the plasma reaction region and the products were then condensed in the heat exchanger, were separated from the gas by the powder filter, and then finally collected in the powder collector. The effect of various processing parameters such as plasma gas, carrier gas, cooling gas, precursor raw materials and feeding rate were studied in this work. Cu, Mo, W, Mo-Ni and Fe-Co nanopowders were successfully prepared by using the microwave plasma synthesis method. The processing conditions can be tuned to manipulate the particle size of the nanopowders.

  3. Cysteine as a Biological Probe for Comparing Plasma Sources

    Science.gov (United States)

    Lackmann, Jan-Wilm; Golda, Judith; Kogelheide, Friederike; Held, Julian; Schulz-von-der-Gathen, Volker; Stapelmann, Katharina

    2016-09-01

    A large variety of plasma sources are available in the plasma medicine community. While enabling to choose the most promising source for a certain biomedical application, comparison of the different sources with a focus on their effect on biological targets is rather challenging. To allow for better comparison of various sources, the recent European COST action MP1101 was used to design the COST reference microplasma jet. Cysteine is a promising candidate investigate the impact of plasma from various sources on a standardized biological molecule, which is especially relevant for the investigations on a molecular level after plasma treatment. The simple structure of cysteine allows for a more in-depth analysis of each chemical group after plasma treatment and enables a comparison between different plasma sources and treatment parameters on each chemical group. The model itself has already been successfully established using a dielectric barrier discharge. Here, additional plasma sources are compared by the means of their impact on cysteine samples, showing e.g. the influence of feed-gas variations by adding oxygen or nitrogen admixture This work was supported by the German Research Foundation (DFG) with the packet grant PAK816 (PlaCID).

  4. Nanofiltration of plasma-derived biopharmaceutical products.

    Science.gov (United States)

    Burnouf, T; Radosevich, M

    2003-01-01

    This review presents the current status on the use and benefits of viral removal filtration systems--known as nanofiltration--in the manufacture of plasma-derived coagulation factor concentrates and other biopharmaceutical products from human blood origin. Nanofiltration of plasma products has been implemented at a production scale in the early 1990s to improve margin of viral safety, as a complement to the viral reduction treatments, such as solvent-detergent and heat treatments, already applied for the inactivation of human immunodeficiency virus, hepatitis B and hepatitis C virus. The main reason for the introduction of nanofiltration was the need to improve product safety against non-enveloped viruses and to provide a possible safeguard against new infectious agents potentially entering the human plasma pool. Nanofiltration has gained quick acceptance as it is a relatively simple manufacturing step that consists in filtering protein solution through membranes of a very small pore size (typically 15-40 nm) under conditions that retain viruses by a mechanism largely based on size exclusion. Recent large-scale experience throughout the world has now established that nanofiltration is a robust and reliable viral reduction technique that can be applied to essentially all plasma products. Many of the licensed plasma products are currently nanofiltered. The technology has major advantages as it is flexible and it may combine efficient and largely predictable removal of more than 4 to 6 logs of a wide range of viruses, with an absence of denaturing effect on plasma proteins. Compared with other viral reduction means, nanofiltration may be the only method to date permitting efficient removal of enveloped and non-enveloped viruses under conditions where 90-95% of protein activity is recovered. New data indicate that nanofiltration may also remove prions, opening new perspectives in the development and interest of this technique. Nanofiltration is increasingly becoming a

  5. Biological production of organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jianping; Paddock, Troy; Carrieri, Damian; Maness, Pin-Ching; Seibert, Michael

    2016-04-12

    Strains of cyanobacteria that produce high levels of alpha ketoglutarate (AKG) and pyruvate are disclosed herein. Methods of culturing these cyanobacteria to produce AKG or pyruvate and recover AKG or pyruvate from the culture are also described herein. Nucleic acid sequences encoding polypeptides that function as ethylene-forming enzymes and their use in the production of ethylene are further disclosed herein. These nucleic acids may be expressed in hosts such as cyanobacteria, which in turn may be cultured to produce ethylene.

  6. Natural production of biological optical systems

    Science.gov (United States)

    Choi, Seung Ho; Kim, Young L.

    2015-03-01

    Synthesis and production in nature often provide ideas to design and fabricate advanced biomimetic photonic materials and structures, leading to excellent physical properties and enhanced performance. In addition, the recognition and utilization of natural or biological substances have been typical routes to develop biocompatible and biodegradable materials for medical applications. In this respect, biological lasers utilizing such biomaterials and biostructures have been received considerable attention, given a variety of implications and potentials for bioimaging, biosensing, implantation, and therapy. However, without relying on industrial facilities, eco-friendly massive production of such optical components or systems has not yet been investigated. We show examples of bioproduction of biological lasers using agriculture and fisheries. We anticipate that such approaches will open new possibilities for scalable eco-friendly `green' production of biological photonics components and systems.

  7. Quantum Dynamics of Biological Plasma in the External Coulomb Field

    Science.gov (United States)

    Lasukov, V. V.; Lasukova, T. V.; Lasukova, O. V.

    2013-10-01

    A quantum solution to the truncated Fisher-Kolmogorov-Petrovskii-Piskunov equation with Coulomb convection and linear diffusion is derived. The quantum radiation of biological systems, individual microorganisms (cells, bacteria), and dust plasma particles in the Coulomb field is studied using the foregoing solution.

  8. Chinese plasma-derived products supply under the lot release management system in 2007-2011.

    Science.gov (United States)

    Zhang, Xuejun; Ye, Shengliang; Du, Xi; Yuan, Jing; Zhao, Chaoming; Li, Changqing

    2013-11-01

    In 2007, the Chinese State Food and Drug Administration (SFDA) implemented a management system for lot release of all plasma-derived products. Since then, there have been only a few systematic studies of the blood supply, which is a concern when considering the small amount of plasma collected per capita (approximately 3 L/1000 people). As a result, there may be a threat to the safety of the available blood supply. In this study, we examined the characteristics of the supply of Chinese plasma-derived products. We investigated the reports of lot-released biological products derived from all 8 national or regional regulatory authorities in China from 2007 to 2011. The market supply characteristics of Chinese plasma-derived products were analyzed by reviewing the changes in supply varieties, the batches of lot-released plasma-derived products and the actual supply. As a result, the national regulatory authorities can more accurately develop a specific understanding of the production and quality management information provided by Chinese plasma product manufacturers. The implementation of the lot release system further ensures the clinical validity of the plasma-derived products in China and improves the safety of using plasma-derived products. This work provides an assessment of the future Chinese market supply of plasma-derived products and can function as a theoretical basis for the establishment of hemovigilance. Copyright © 2013 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  9. Product development of probiotics as biological drugs.

    Science.gov (United States)

    Sutton, Ann

    2008-02-01

    Elements of product and manufacturing-process design are described for product development of live biotherapeutic biological drugs. Product design uses the history and the phenotypic and genotypic characterization of the selected strain. The quality and integrity of the selected strain can be ensured by preservation in a qualified cell-bank system. Manufacturing-process design includes step-by-step description, including the necessary process-input parameters and the expected output results. The active ingredients in the biological drug are usually manufactured using aseptic processing. The manufacture of the final dosage form of live biotherapeutics requires bioburden control or aseptic manufacture, as appropriate. Specifications for live biotherapeutics must comply with regulations for licensed biological products. Evidence of stability for the duration of the shelf life, as well as stability under the recommended conditions of use, must be provided for licensure.

  10. 9 CFR 114.6 - Mixing biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Mixing biological products. 114.6 Section 114.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... BIOLOGICAL PRODUCTS § 114.6 Mixing biological products. Each biological product, when in liquid form,...

  11. Standardization for natural product synthetic biology.

    Science.gov (United States)

    Zhao, Huimin; Medema, Marnix H

    2016-08-27

    Standardization is one of the foundational features of modern-day engineering, and the use of standardized parts and processes is a key element that distinguishes bona fide synthetic biology from traditional genetic engineering. Here, we discuss the role of standardization in natural product synthetic biology, focusing on standardization of data on biosynthetic pathways and gene clusters, as well as the role of standardization in the process of biosynthetic gene cluster engineering.

  12. Simulating plasma production from hypervelocity impacts

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, Alex, E-mail: alexcf@stanford.edu; Close, Sigrid [Stanford University, Aeronautics and Astronautics, 496 Lomita Mall, Stanford, California 94305 (United States); Mathias, Donovan [NASA Ames Research Center, Bldg. 258, Moffett Field, California 94035 (United States)

    2015-09-15

    Hypervelocity particles, such as meteoroids and space debris, routinely impact spacecraft and are energetic enough to vaporize and ionize themselves and as well as a portion of the target material. The resulting plasma rapidly expands into the surrounding vacuum. While plasma measurements from hypervelocity impacts have been made using ground-based technologies such as light gas guns and Van de Graaff dust accelerators, some of the basic plasma properties vary significantly between experiments. There have been both ground-based and in-situ measurements of radio frequency (RF) emission from hypervelocity impacts, but the physical mechanism responsible and the possible connection to the impact-produced plasma are not well understood. Under certain conditions, the impact-produced plasma can have deleterious effects on spacecraft electronics by providing a new current path, triggering an electrostatic discharge, causing electromagnetic interference, or generating an electromagnetic pulse. Multi-physics simulations of plasma production from hypervelocity impacts are presented. These simulations incorporate elasticity and plasticity of the solid target, phase change and plasma formation, and non-ideal plasma physics due to the high density and low temperature of the plasma. A smoothed particle hydrodynamics method is used to perform a continuum dynamics simulation with these additional physics. By examining a series of hypervelocity impacts, basic properties of the impact produced plasma plume (density, temperature, expansion speed, charge state) are determined for impactor speeds between 10 and 72 km/s. For a large range of higher impact speeds (30–72 km/s), we find the temperature is unvarying at 2.5 eV. We also find that the plasma plume is weakly ionized for impact speeds less than 14 km/s and fully ionized for impact speeds greater than 20 km/s, independent of impactor mass. This is the same velocity threshold for the detection of RF emission in recent

  13. Variation of plasma parameters in a modified mode of plasma production in a double plasma device

    Indian Academy of Sciences (India)

    A Phukan; M K Mishra; B K Saikia; M Chakraborty

    2010-03-01

    A modified mode of plasma production in a double plasma device is presented and plasma parameters are controlled in this configuration. Here plasma is produced by applying a discharge voltage between the hot filaments in the source (cathode) and the target magnetic cage (anode) of the device. In this configuration, the hot electron emitting filaments are present only in the source and the magnetic cage of this is kept at a negative bias such that due to the repulsion of the cage bias, the primary electrons can go to the grounded target and produce plasma there. The plasma parameters can be controlled by varying the voltages applied to the source magnetic cage and the separation grid of the device.

  14. Nanodomain stabilization dynamics in plasma membranes of biological cells

    Science.gov (United States)

    Das, Tamal; Maiti, Tapas K.; Chakraborty, Suman

    2011-02-01

    We discover that a synergistically amplifying role of stabilizing membrane proteins and continuous lipid recycling can explain the physics governing the stability, polydispersity, and dynamics of lipid raft domains in plasma membranes of biological cells. We establish the conjecture using a generalized order parameter based on theoretical formalism, endorsed by detailed scaling arguments and domain mapping. Quantitative agreements with morphological distributions of raft complexes, as obtained from Förster resonance energy transfer based visualization, support the present theoretical conjecture.

  15. Standardization for natural product synthetic biology

    NARCIS (Netherlands)

    Zhao, Huimin; Medema, Marnix H.

    2016-01-01

    Standardization is one of the foundational features of modern-day engineering, and the use of standardized parts and processes is a key element that distinguishes bona fide synthetic biology from traditional genetic engineering. Here, we discuss the role of standardization in natural product

  16. 9 CFR 115.2 - Inspections of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspections of biological products... § 115.2 Inspections of biological products. (a) Any biological product, the container of which bears a...) When notified to stop distribution and sale of a serial or subserial of a veterinary biological...

  17. Hydrogen Production from Ammonia Using a Plasma Membrane Reactor

    Directory of Open Access Journals (Sweden)

    Shinji Kambara

    2016-06-01

    Full Text Available In this study, an efficient method for using pulsed plasma to produce hydrogen from ammonia was developed. An original pulsed plasma reactor with a hydrogen separation membrane was developed for efficient hydrogen production, and its hydrogen production performance was investigated. Hydrogen production in the plasma was affected by the applied voltage and flow rate of ammonia gas. The maximum hydrogen production flow rate of a typical plasma reactor was 8.7 L/h, whereas that of the plasma membrane reactor was 21.0 L/h. We found that ammonia recombination reactions in the plasma controlled hydrogen production in the plasma reactor. In the plasma membrane reactor, a significant increase in hydrogen production was obtained because ammonia recombination reactions were inhibited by the permeation of hydrogen radicals generated in the plasma through a palladium alloy membrane. The energy efficiency was 4.42 mol-H2/kWh depending on the discharge power.

  18. 9 CFR 114.17 - Rebottling of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Rebottling of biological products. 114.17 Section 114.17 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.17 Rebottling of biological products. The Administrator...

  19. 9 CFR 114.18 - Reprocessing of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Reprocessing of biological products. 114.18 Section 114.18 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.18 Reprocessing of biological products. The Administrator...

  20. Dairy products and plasma cholesterol levels

    Directory of Open Access Journals (Sweden)

    Lena Ohlsson

    2010-08-01

    Full Text Available Cholesterol synthesized in the body or ingested is an essential lipid component for human survival from our earliest life. Newborns ingest about 3–4 times the amount per body weight through mother's milk compared to the dietary intake of adults. A birth level of 1.7 mmol/L plasma total cholesterol will increase to 4–4.5 mmol/L during the nursing period and continue to increase from adulthood around 40% throughout life. Coronary artery disease and other metabolic disorders are strongly associated with low-density lipoprotein (LDL and high-density lipoprotein (HDL cholesterol as well as triacylglycerol concentration. Milk fat contains a broad range of fatty acids and some have a negative impact on the cholesterol rich lipoproteins. The saturated fatty acids (SFAs, such as palmitic acid (C16:0, myristic acid (C14:0, and lauric acid (C12:0, increase total plasma cholesterol, especially LDL, and constitute 11.3 g/L of bovine milk, which is 44.8% of total fatty acid in milk fat. Replacement of dairy SFA and trans-fatty acids with polyunsaturated fatty acids decreases plasma cholesterol, especially LDL cholesterol, and is associated with a reduced risk of cardiovascular disease. Available data shows different effects on lipoproteins for different dairy products and there is uncertainty as to the impact a reasonable intake amount of dairy items has on cardiovascular risk. The aim of this review is to elucidate the effect of milk components and dairy products on total cholesterol, LDL, HDL, and the LDL/HDL quotients. Based on eight recent randomized controlled trials of parallel or cross-over design and recent reviews it can be concluded that replacement of saturated fat mainly (but not exclusively derived from high-fat dairy products with low-fat dairy products lowers LDL/HDL cholesterol and total/HDL cholesterol ratios. Whey, dairy fractions enriched in polar lipids, and techniques such as fermentation, or fortification of cows feeding can be used

  1. Ferrokinetics: a biologic model for plasma iron exchange in man.

    Science.gov (United States)

    Cook, J D; Marsaglia, G; Eschbach, J W; Funk, D D; Finch, C A

    1970-02-01

    A method is presented for calculating internal iron kinetics. An early reflux associated with extravascular exchange and a late reflux associated with erythropoiesis are described. A biologic model of iron exchange is proposed in which erythron iron turnover is divided into an effective portion (iron fixed in circulating red cells) and wastage iron of erythropoiesis (late reflux). Nonerythroid iron exchange also has a fixed portion (parenchymal uptake) and an early reflux (lymphatic circuit), both of which correlate in amount with the amount of plasma iron. Ferrokinetic measurements in normal subjects and in various pathologic states are presented to validate the model.

  2. Systems biology solutions for biochemical production challenges

    DEFF Research Database (Denmark)

    Hansen, Anne Sofie Lærke; Lennen, Rebecca M; Sonnenschein, Nikolaus

    2017-01-01

    There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics character......There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics...... characterization, genome-scale metabolic modeling, and adaptive laboratory evolution can be readily deployed in metabolic engineering projects. However, high performance strains usually carry tens of genetic modifications and need to operate in challenging environmental conditions. This additional complexity...... compared to basic science research requires pushing systems biology strategies to their limits and often spurs innovative developments that benefit fields outside metabolic engineering. Here we survey recent advanced applications of systems biology methods in engineering microbial production strains...

  3. 9 CFR 103.1 - Preparation of experimental biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of experimental biological... PRODUCTION, DISTRIBUTION, AND EVALUATION OF BIOLOGICAL PRODUCTS PRIOR TO LICENSING § 103.1 Preparation of experimental biological products. Except as otherwise provided in this section, experimental...

  4. 9 CFR 113.50 - Ingredients of biological products.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Ingredients of biological products... REQUIREMENTS Ingredient Requirements § 113.50 Ingredients of biological products. All ingredients used in a licensed biological product shall meet accepted standards of purity and quality; shall be...

  5. What drives the biological productivity of the northern Indian Ocean?

    Digital Repository Service at National Institute of Oceanography (India)

    PrasannaKumar, S.; Narvekar, J.; Nuncio, M.; Gauns, M.; Sardessai, S.

    biological productivity of the Arabian Sea was driven by seasonally changing physical processes in accordance with the semiannual switching of atmospheric forcing. In summer the high biological productivity was triggered by a combination of wind-driven mixing...

  6. Biological stimulation of the Human skin applying health promoting light and plasma sources

    Energy Technology Data Exchange (ETDEWEB)

    Awakowicz, P.; Bibinov, N. [Center for Plasma Science and Technology, Ruhr-University, Bochum (Germany); Born, M.; Niemann, U. [Philips Research, Aachen (Germany); Busse, B. [Zell-Kontakt GmbH, Noerten-Hardenberg (Germany); Gesche, R.; Kuehn, S.; Porteanu, H.E. [Ferdinand-Braun-Institut fuer Hoechstfrequenztechnik, Berlin (Germany); Helmke, A. [University of Applied Sciences and Arts, Goettingen (Germany); Kaemling, A.; Wandke, D. [CINOGY GmbH, Duderstadt (Germany); Kolb-Bachofen, V.; Liebmann, J. [Institute for Immunobiology, Heinrich-Heine University, Duesseldorf (Germany); Kovacs, R.; Mertens, N.; Scherer, J. [Aurion Anlagentechnik GmbH, Seligenstadt (Germany); Oplaender, C.; Suschek, C. [Clinic for Plastic Surgery, University Clinic, Aachen (Germany); Vioel, W. [Laser-Laboratorium, Goettingen (Germany); University of Applied Sciences and Arts, Goettingen (Germany)

    2009-10-15

    In the frame of BMBF project ''BioLiP'', new physical treatment techniques aiming at medical treatment of the human skin have been developed. The acronym BioLiP stands for ''Desinfektion, Entkeimung und biologische Stimulation der Haut durch gesundheitsfoerdernde Licht- und Plasmaquellen'' (Disinfection, germ reduction and biological stimulation of the human skin by health promoting light and plasma sources). A source applying a low-temperature dielectric barrier discharge plasma (DBD) has been investigated on its effectiveness for skin disinfection and stimulation of biological material. Alternatively an atmospheric plasma source consisting of a microwave resonator combined with a solid state power oscillator has been examined. This concept which allows for a compact and efficient design avoiding external microwave power supply and matching units has been optimized with respect to nitrogen monoxide (NO) production in high yields. In both cases various application possibilities in the medical and biological domain are opened up. Light sources in the visible spectral range have been investigated with respect to the proliferation of human cell types. Intensive highly selective blue light sources based on LED technology can slow down proliferation rates without inducing toxic effects which offers new opportunities for treatments of so-called hyperproliferative skin conditions (e.g. with psoriasis or in wound healing) using UV-free light. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. Plasma and Plasma Protein Product Transfusion: A Canadian Blood Services Centre for Innovation Symposium.

    Science.gov (United States)

    Zeller, Michelle P; Al-Habsi, Khalid S; Golder, Mia; Walsh, Geraldine M; Sheffield, William P

    2015-07-01

    Plasma obtained via whole blood donation processing or via apheresis technology can either be transfused directly to patients or pooled and fractionated into plasma protein products that are concentrates of 1 or more purified plasma protein. The evidence base supporting clinical efficacy in most of the indications for which plasma is transfused is weak, whereas high-quality evidence supports the efficacy of plasma protein products in at least some of the clinical settings in which they are used. Transfusable plasma utilization remains composed in part of applications that fall outside of clinical practice guidelines. Plasma contains all of the soluble coagulation factors and is frequently transfused in efforts to restore or reinforce patient hemostasis. The biochemical complexities of coagulation have in recent years been rationalized in newer cell-based models that supplement the cascade hypothesis. Efforts to normalize widely used clinical hemostasis screening test values by plasma transfusion are thought to be misplaced, but superior rapid tests have been slow to emerge. The advent of non-vitamin K-dependent oral anticoagulants has brought new challenges to clinical laboratories in plasma testing and to clinicians needing to reverse non-vitamin K-dependent oral anticoagulants urgently. Current plasma-related controversies include prophylactic plasma transfusion before invasive procedures, plasma vs prothrombin complex concentrates for urgent warfarin reversal, and the utility of increased ratios of plasma to red blood cell units transfused in massive transfusion protocols. The first recombinant plasma protein products to reach the clinic were recombinant hemophilia treatment products, and these donor-free equivalents to factors VIII and IX are now being supplemented with novel products whose circulatory half-lives have been increased by chemical modification or genetic fusion. Achieving optimal plasma utilization is an ongoing challenge in the interconnected

  8. Systems Biology of Microbial Exopolysaccharides Production.

    Science.gov (United States)

    Ates, Ozlem

    2015-01-01

    Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

  9. Systems biology of microbial exopolysaccharides production

    Directory of Open Access Journals (Sweden)

    Ozlem eAtes

    2015-12-01

    Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

  10. Biological production of ethanol from coal

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Due to the abundant supply of coal in the United States, significant research efforts have occurred over the past 15 years concerning the conversion of coal to liquid fuels. Researchers at the University of Arkansas have concentrated on a biological approach to coal liquefaction, starting with coal-derived synthesis gas as the raw material. Synthesis gas, a mixture of CO, H[sub 2], CO[sub 2], CH[sub 4] and sulfur gases, is first produced using traditional gasification techniques. The CO, CO[sub 2] and H[sub 2] are then converted to ethanol using a bacterial culture of Clostridium 1jungdahlii. Ethanol is the desired product if the resultant product stream is to be used as a liquid fuel. However, under normal operating conditions, the wild strain'' produces acetate in favor of ethanol in conjunction with growth in a 20:1 molar ratio. Research was performed to determine the conditions necessary to maximize not only the ratio of ethanol to acetate, but also to maximize the concentration of ethanol resulting in the product stream.

  11. Plasma production for electron acceleration by resonant plasma wave

    Science.gov (United States)

    Anania, M. P.; Biagioni, A.; Chiadroni, E.; Cianchi, A.; Croia, M.; Curcio, A.; Di Giovenale, D.; Di Pirro, G. P.; Filippi, F.; Ghigo, A.; Lollo, V.; Pella, S.; Pompili, R.; Romeo, S.; Ferrario, M.

    2016-09-01

    Plasma wakefield acceleration is the most promising acceleration technique known nowadays, able to provide very high accelerating fields (10-100 GV/m), enabling acceleration of electrons to GeV energy in few centimeter. However, the quality of the electron bunches accelerated with this technique is still not comparable with that of conventional accelerators (large energy spread, low repetition rate, and large emittance); radiofrequency-based accelerators, in fact, are limited in accelerating field (10-100 MV/m) requiring therefore hundred of meters of distances to reach the GeV energies, but can provide very bright electron bunches. To combine high brightness electron bunches from conventional accelerators and high accelerating fields reachable with plasmas could be a good compromise allowing to further accelerate high brightness electron bunches coming from LINAC while preserving electron beam quality. Following the idea of plasma wave resonant excitation driven by a train of short bunches, we have started to study the requirements in terms of plasma for SPARC_LAB (Ferrario et al., 2013 [1]). In particular here we focus on hydrogen plasma discharge, and in particular on the theoretical and numerical estimates of the ionization process which are very useful to design the discharge circuit and to evaluate the current needed to be supplied to the gas in order to have full ionization. Eventually, the current supplied to the gas simulated will be compared to that measured experimentally.

  12. Plasma production for electron acceleration by resonant plasma wave

    Energy Technology Data Exchange (ETDEWEB)

    Anania, M.P., E-mail: maria.pia.anania@lnf.infn.it [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Biagioni, A.; Chiadroni, E. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Cianchi, A. [University of Rome Tor Vergata - INFN, via della Ricerca Scientifica, 1, 00133 Roma (Italy); INFN, Via della Ricerca Scientifica, 1, 00133 Roma (Italy); Croia, M.; Curcio, A. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Di Giovenale, D.; Di Pirro, G.P. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Filippi, F. [University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Ghigo, A.; Lollo, V.; Pella, S.; Pompili, R. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); Romeo, S. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy); University of Rome La Sapienza, Piazzale Aldo Moro, 2, 00185 Roma (Italy); Ferrario, M. [INFN - LNF, via Enrico Fermi, 40, 00044 Frascati (Italy)

    2016-09-01

    Plasma wakefield acceleration is the most promising acceleration technique known nowadays, able to provide very high accelerating fields (10–100 GV/m), enabling acceleration of electrons to GeV energy in few centimeter. However, the quality of the electron bunches accelerated with this technique is still not comparable with that of conventional accelerators (large energy spread, low repetition rate, and large emittance); radiofrequency-based accelerators, in fact, are limited in accelerating field (10–100 MV/m) requiring therefore hundred of meters of distances to reach the GeV energies, but can provide very bright electron bunches. To combine high brightness electron bunches from conventional accelerators and high accelerating fields reachable with plasmas could be a good compromise allowing to further accelerate high brightness electron bunches coming from LINAC while preserving electron beam quality. Following the idea of plasma wave resonant excitation driven by a train of short bunches, we have started to study the requirements in terms of plasma for SPARC-LAB (Ferrario et al., 2013 [1]). In particular here we focus on hydrogen plasma discharge, and in particular on the theoretical and numerical estimates of the ionization process which are very useful to design the discharge circuit and to evaluate the current needed to be supplied to the gas in order to have full ionization. Eventually, the current supplied to the gas simulated will be compared to that measured experimentally.

  13. Monascus secondary metabolites: production and biological activity.

    Science.gov (United States)

    Patakova, Petra

    2013-02-01

    The genus Monascus, comprising nine species, can reproduce either vegetatively with filaments and conidia or sexually by the formation of ascospores. The most well-known species of genus Monascus, namely, M. purpureus, M. ruber and M. pilosus, are often used for rice fermentation to produce red yeast rice, a special product used either for food coloring or as a food supplement with positive effects on human health. The colored appearance (red, orange or yellow) of Monascus-fermented substrates is produced by a mixture of oligoketide pigments that are synthesized by a combination of polyketide and fatty acid synthases. The major pigments consist of pairs of yellow (ankaflavin and monascin), orange (rubropunctatin and monascorubrin) and red (rubropunctamine and monascorubramine) compounds; however, more than 20 other colored products have recently been isolated from fermented rice or culture media. In addition to pigments, a group of monacolin substances and the mycotoxin citrinin can be produced by Monascus. Various non-specific biological activities (antimicrobial, antitumor, immunomodulative and others) of these pigmented compounds are, at least partly, ascribed to their reaction with amino group-containing compounds, i.e. amino acids, proteins or nucleic acids. Monacolins, in the form of β-hydroxy acids, inhibit hydroxymethylglutaryl-coenzyme A reductase, a key enzyme in cholesterol biosynthesis in animals and humans.

  14. 9 CFR 106.1 - Biological products; exemption.

    Science.gov (United States)

    2010-01-01

    ... Section 106.1 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS EXEMPTION FOR BIOLOGICAL PRODUCTS USED IN DEPARTMENT PROGRAMS OR UNDER DEPARTMENT CONTROL OR SUPERVISION § 106.1 Biological...

  15. Weak Interaction Neutron Production Rates in Fully Ionized Plasmas

    CERN Document Server

    Widom, A; Srivastava, Y N

    2013-01-01

    Employing the weak interaction reaction wherein a heavy electron is captured by a proton to produce a neutron and a neutrino, the neutron production rate for neutral hydrogen gases and for fully ionized plasmas is computed. Using the Coulomb atomic bound state wave functions of a neutral hydrogen gas, our production rate results are in agreement with recent estimates by Maiani {\\it et al}. Using Coulomb scattering state wave functions for the fully ionized plasma, we find a substantially enhanced neutron production rate. The scattering wave function should replace the bound state wave function for estimates of the enhanced neutron production rate on water plasma drenched cathodes of chemical cells.

  16. Biological hydrogen production using a membrane bioreactor.

    Science.gov (United States)

    Oh, Sang-Eun; Iyer, Prabha; Bruns, Mary Ann; Logan, Bruce E

    2004-07-01

    A cross-flow membrane was coupled to a chemostat to create an anaerobic membrane bioreactor (MBR) for biological hydrogen production. The reactor was fed glucose (10,000 mg/L) and inoculated with a soil inoculum heat-treated to kill non-spore-forming methanogens. Hydrogen gas was consistently produced at a concentration of 57-60% in the headspace under all conditions. When operated in chemostat mode (no flow through the membrane) at a hydraulic retention time (HRT) of 3.3 h, 90% of the glucose was removed, producing 2200 mg/L of cells and 500 mL/h of biogas. When operated in MBR mode, the solids retention time (SRT) was increased to SRT = 12 h producing a solids concentration in the reactor of 5800 mg/L. This SRT increased the overall glucose utilization (98%), the biogas production rate (640 mL/h), and the conversion efficiency of glucose-to-hydrogen from 22% (no MBR) to 25% (based on a maximum of 4 mol-H(2)/mol-glucose). When the SRT was increased from 5 h to 48 h, glucose utilization (99%) and biomass concentrations (8,800 +/- 600 mg/L) both increased. However, the biogas production decreased (310 +/- 40 mL/h) and the glucose-to-hydrogen conversion efficiency decreased from 37 +/- 4% to 18 +/- 3%. Sustained permeate flows through the membrane were in the range of 57 to 60 L/m(2) h for three different membrane pore sizes (0.3, 0.5, and 0.8 microm). Most (93.7% to 99.3%) of the membrane resistance was due to internal fouling and the reversible cake resistance, and not the membrane itself. Regular backpulsing was essential for maintaining permeate flux through the membrane. Analysis of DNA sequences using ribosomal intergenic spacer analysis indicated bacteria were most closely related to members of Clostridiaceae and Flexibacteraceae, including Clostridium acidisoli CAC237756 (97%), Linmingia china AF481148 (97%), and Cytophaga sp. MDA2507 AF238333 (99%). No PCR amplification of 16s rRNA genes was obtained when archaea-specific primers were used.

  17. Positron plasma control techniques for the production of cold antihydrogen

    Science.gov (United States)

    Funakoshi, R.; Amoretti, M.; Bonomi, G.; Bowe, P. D.; Canali, C.; Carraro, C.; Cesar, C. L.; Charlton, M.; Doser, M.; Fontana, A.; Fujiwara, M. C.; Genova, P.; Hangst, J. S.; Hayano, R. S.; Jørgensen, L. V.; Kellerbauer, A.; Lagomarsino, V.; Landua, R.; Lodi Rizzini, E.; Macrì, M.; Madsen, N.; Manuzio, G.; Mitchard, D.; Montagna, P.; Posada, L. G. C.; Rotondi, A.; Testera, G.; Variola, A.; Venturelli, L.; van der Werf, D. P.; Yamazaki, Y.; Zurlo, N.

    2007-07-01

    An observation of a clear dependence of antihydrogen production on positron plasma shapes is reported. For this purpose a plasma control method has been developed combining the plasma rotating-wall technique with a mode diagnostic system. With the help of real-time and nondestructive observations, the rotating-wall parameters have been optimized. The positron plasma can be manipulated into a wide range of shapes (aspect ratio 6.5⩽α≲80 ) and densities (1.5×108⩽n≲7×109cm-3) within a short duration (25s) compatible with the ATHENA antihydrogen production cycle.

  18. Positron plasma control techniques for the production of cold antihydrogen

    CERN Document Server

    Funakoshi, R; Bonomi, G; Bowe, P D; Canali, C; Carraro, C; Cesar, C L; Charlton, M; Doser, M; Fontana, A; Fujiwara, M C; Genova, P; Hangst, J S; Hayano, R S; Jørgensen, L V; Kellerbauer, A G; Lagomarsino, V; Landua, R; Lodi-Rizzini, E; Macrì, M; Madsen, N; Manuzio, G; Mitchard, D; Montagna, P; Posada, L G C; Rotondi, A; Testera, G; Variola, A; Venturelli, L; Van der Werf, D P; Yamazaki, Y; Zurlo, N

    2007-01-01

    An observation of a clear dependence of antihydrogen production on positron plasma shapes is reported. For this purpose a plasma control method has been developed combining the plasma rotating-wall technique with a mode diagnostic system. With the help of real-time and nondestructive observations, the rotating-wall parameters have been optimized. The positron plasma can be manipulated into a wide range of shapes (aspect ratio 6.5≤α≲80) and densities (1.5×108≤n≲7×109 cm−3) within a short duration (25 s) compatible with the ATHENA antihydrogen production cycle.

  19. Biosynthesis of therapeutic natural products using synthetic biology.

    Science.gov (United States)

    Awan, Ali R; Shaw, William M; Ellis, Tom

    2016-10-01

    Natural products are a group of bioactive structurally diverse chemicals produced by microorganisms and plants. These molecules and their derivatives have contributed to over a third of the therapeutic drugs produced in the last century. However, over the last few decades traditional drug discovery pipelines from natural products have become far less productive and far more expensive. One recent development with promise to combat this trend is the application of synthetic biology to therapeutic natural product biosynthesis. Synthetic biology is a young discipline with roots in systems biology, genetic engineering, and metabolic engineering. In this review, we discuss the use of synthetic biology to engineer improved yields of existing therapeutic natural products. We further describe the use of synthetic biology to combine and express natural product biosynthetic genes in unprecedented ways, and how this holds promise for opening up completely new avenues for drug discovery and production. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Biologically active substances in bakery products

    Directory of Open Access Journals (Sweden)

    L. P. Paschenko

    2012-01-01

    Full Text Available Development of technology for muffins functionality based on biologically active composition comprising lyupinovo-melangehydrolyzatetykvoproteina, soy protein isolate, mustard oil and mineral fortifier calcium.

  1. Biological control and sustainable food production

    NARCIS (Netherlands)

    Bale, J.S.; Lenteren, van J.C.; Bigler, F.

    2008-01-01

    The use of biological control for the management of pest insects pre-dates the modern pesticide era. The first major successes in biological control occurred with exotic pests controlled by natural enemy species collected from the country or area of origin of the pest (classical control). Augmentati

  2. Surface disorder production during plasma immersion implantation

    NARCIS (Netherlands)

    Lohner, T.; Khanh, N.Q.; Petrik, P.; Biro, L.P.; Fried, M.; Pinter, I.; Lehnert, W.; Frey, L.; Ryssel, H.; Wentink, D.J.; Gyulai, J.

    1998-01-01

    Comparative investigations were performed using high-depth-resolution Rutherford backscattering (RBS) combined with channeling, spectroellipsometry (SE) and atomic force microscopy (AFM) to analyze surface disorder and surface roughness formed during plasma immersion implantation of silicon (100) su

  3. Weak Interaction Neutron Production Rates in Fully Ionized Plasmas

    OpenAIRE

    Widom, A.; Swain, J.; Srivastava, Y. N.

    2013-01-01

    Employing the weak interaction reaction wherein a heavy electron is captured by a proton to produce a neutron and a neutrino, the neutron production rate for neutral hydrogen gases and for fully ionized plasmas is computed. Using the Coulomb atomic bound state wave functions of a neutral hydrogen gas, our production rate results are in agreement with recent estimates by Maiani {\\it et al}. Using Coulomb scattering state wave functions for the fully ionized plasma, we find a substantially enha...

  4. Plasma graviton production in TeV-scale gravity

    CERN Document Server

    Melkumova, E Yu

    2010-01-01

    We develop the theory of interaction of classical plasma with Kaluza-Klein (KK) gravitons in the ADD model of TeV-scale gravity. Plasma is described within the kinetic approach as the system of charged particles and Maxwell field both confined on the brane. Interaction with multidimensional gravity living in the bulk with $n$ compact extra dimensions is introduced within the linearized theory. The KK gravitons emission rates are computed taking into account plasma collective effects through the two-point correlation functions of the fluctuations of the plasma energy-momentum tensor. Apart from known mechanisms (such as bremsstrahlung and gravi-Primakoff effect) we find essentially collective channels such as the coalescence of plasma waves into gravitons which may be manifest in turbulent plasmas. Our results indicate that commonly used rates of the KK gravitons production in stars and supernovae may be underestimated.

  5. Biological variations in plasma VEGF and VEGFR-1 may compromise their biomarker value in colorectal cancer

    DEFF Research Database (Denmark)

    Svendsen, Mads N.; Brunner, Nils; Christensen, Ib Jarle

    2010-01-01

    Vascular Endothelial Growth Factor (VEGF) plays a prominent role in tumor angiogenesis and plasma VEGF concentration may carry prognostic information in colorectal cancer. The VEGF receptor 1 (VEGFR-1) is a regulatory receptor which is shredded into plasma of patients with colorectal cancer. For ....... For both molecules, large biological variation and lack of standardization of assay procedures are major challenges....

  6. High density plasma production in a multicusp plasma generator with RF antenna

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Yasuo; Hanada, Masaya; Okumura, Yoshikazu; Tanaka, Masanobu [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment

    1992-10-01

    A high density plasma was produced by radio-frequency in a multicusp plasma generator. The generator is a cylindrical chamber of 200 mm in inner diameter and 270 mm in length with 1-3 turn copper tube antenna. By injecting a 2 MHz, 20 kW RF into the multicusp plasma generator, hydrogen plasma of an ion saturation current density of 120 mA/cm{sup 2} and a hydrogen plasma of a density of 6.0 x 10{sup 11} cm{sup -3} was produced at a pressure of 0.6 Pa in the generator. The ion saturation current density was uniform over the central area of 100 mm in diameter. Coating the antenna with an insulator, we proved that the efficiency of the plasma production was improved. (author).

  7. High density plasma production in a multicusp plasma generator with RF antenna

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, Yasuo; Hanada, Masaya; Okumura, Yoshikazu; Tanaka, Masanobu (Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment)

    1992-10-01

    A high density plasma was produced by radio-frequency in a multicusp plasma generator. The generator is a cylindrical chamber of 200 mm in inner diameter and 270 mm in length with 1-3 turn copper tube antenna. By injecting a 2 MHz, 20 kW RF into the multicusp plasma generator, hydrogen plasma of an ion saturation current density of 120 mA/cm[sup 2] and a hydrogen plasma of a density of 6.0 x 10[sup 11] cm[sup -3] was produced at a pressure of 0.6 Pa in the generator. The ion saturation current density was uniform over the central area of 100 mm in diameter. Coating the antenna with an insulator, we proved that the efficiency of the plasma production was improved. (author).

  8. 9 CFR 102.5 - U.S. Veterinary Biological Product License.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false U.S. Veterinary Biological Product... BIOLOGICAL PRODUCTS § 102.5 U.S. Veterinary Biological Product License. (a) Authorization to produce each biological product shall be specified on a U.S. Veterinary Biological Product License, issued by...

  9. Production and consumption of biological particles in temperate tidal estuaries

    NARCIS (Netherlands)

    Heip, C.H.R.; Goosen, N.K.; Herman, P.M.J.; Kromkamp, J.C.; Middelburg, J.J.; Soetaert, K.E.R.

    1995-01-01

    The question is reviewed whether a balance exists between production and consumption of biological particles in temperate tidal estuaries and what the relationships are between the magnitude of production and consumption processes and system carbon metabolism. The production terms considered are pri

  10. Plasma tissue inhibitor of metalloproteinases-1 as a biological marker?

    DEFF Research Database (Denmark)

    Lomholt, Anne F.; Frederiksen, Camilla B.; Christensen, Ib J.;

    2007-01-01

    Tissue Inhibitor of Metalloproteinases-1 (TIMP-1) may be a valuable biological marker in Colorectal Cancer (CRC). However, prospective validation of TIMP-1 as a biological marker should include a series of pre-analytical considerations. TIMP-1 is stored in platelets, which may degranulate during ...

  11. Biological hydrogen production from industrial wastewaters

    Energy Technology Data Exchange (ETDEWEB)

    Peixoto, Guilherme; Pantoja Filho, Jorge Luis Rodrigues; Zaiat, Marcelo [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). School of Engineering. Dept. Hydraulics and Sanitation], Email: peixoto@sc.usp.br

    2010-07-01

    This research evaluates the potential for producing hydrogen in anaerobic reactors using industrial wastewaters (glycerol from bio diesel production, wastewater from the parboilization of rice, and vinasse from ethanol production). In a complementary experiment the soluble products formed during hydrogen production were evaluated for methane generation. The assays were performed in batch reactors with 2 liters volume, and sucrose was used as a control substrate. The acidogenic inoculum was taken from a packed-bed reactor used to produce hydrogen from a sucrose-based synthetic substrate. The methanogenic inoculum was taken from an upflow anaerobic sludge blanket reactor treating poultry slaughterhouse wastewater. Hydrogen was produced from rice parboilization wastewater (24.27 ml H{sub 2} g{sup -1} COD) vinasse (22.75 ml H{sub 2} g{sup -1} COD) and sucrose (25.60 ml H{sub 2} g{sup -1} COD), while glycerol only showed potential for methane generation. (author)

  12. Biological production of ethanol fom coal

    Energy Technology Data Exchange (ETDEWEB)

    1992-05-01

    Research is continuing in an attempt to increase both the ethanol concentration and product ratio using C. ljungdahlii. The purpose of this report is to present data (acetate to ethanol) utilizing a medium prepared especially for C. ljungdahlii. Medium development studies are presented, as well as reactor studies with the new medium in batch reactors. Continuous stirred tank reactor (CSTR) with cell recycle. The use of this new medium has resulted in significant improvements in cell concentration, ethanol concentration and product ratio.

  13. The preparation of albumin as a biological drug from human plasma by fiber filtration

    Directory of Open Access Journals (Sweden)

    Mousavi Hosseini K

    2011-08-01

    Full Text Available "nBackground: In recent years, consumption of whole-blood for the treatment of patients has decreased but use of biological plasma-derived medicines such as albumin, immunoglobulin and coagulation factors have increased instead. Paying attention to albumin molecular structure is important for its isolation from human plasma. Albumin is a single-chain protein consisting of about 585 amino acids and a molecular weight of 66500 Daltons. Albumin is a stable molecule and it is spherical in shape. There are different methods for human albumin preparation. Considering the large consumption of this biological drug in clinical settings, methods with fewer steps in production line are of big advantage in saving time and manufacturing more products."n "nMethods: In this project, we prepared human albumin using hollow fiber cartridges in order to omit the rework on fraction V+VI. Human albumin is usually produced by the application of cold ethanol method, where albumin is obtained from fraction V by doing a rework on fraction V+VI to separate fraction V."n "nResults: In the current work, human albumin was prepared from fraction V+VI by the help of hollow fiber cartridges. With a concentration of 20%, the obtained albumin had 96.5% of monomer and 3.5% of polymer and polymer aggregate."n "nConclusion: Comparing the obtained human albumin with a number of commercial human albumin samples by the use of SDS-page, the results were satisfactory regarding the 3.5 percent polymer and aggregate rate for the prepared albumin.

  14. Cholesterol oxidation products and their biological importance

    DEFF Research Database (Denmark)

    Kulig, Waldemar; Cwiklik, Lukasz; Jurkiewicz, Piotr

    2016-01-01

    The main biological cause of oxysterols is the oxidation of cholesterol. They differ from cholesterol by the presence of additional polar groups that are typically hydroxyl, keto, hydroperoxy, epoxy, or carboxyl moieties. Under typical conditions, oxysterol concentration is maintained at a very low...... and precisely regulated level, with an excess of cholesterol. Like cholesterol, many oxysterols are hydrophobic and hence confined to cell membranes. However, small chemical differences between the sterols can significantly affect how they interact with other membrane components, and this in turn can have...

  15. Biocomes: new biological products for sustainable farming and forestry

    NARCIS (Netherlands)

    Teixidó, N.; Cal, de A.L.; Usall, J.; Guijarro, B.; Larena, I.; Torres, R.; Abadias, M.; Köhl, J.

    2016-01-01

    Abstract:
    The growing interest in biological control has been reflected during last decades in a big number of scientific publications, books and symposia. However, biocontrol commercial application at a European level is limited and biological control products are not currently available for

  16. Biocomes: new biological products for sustainable farming and forestry

    NARCIS (Netherlands)

    Teixidó, N.; Cal, de A.L.; Usall, J.; Guijarro, B.; Larena, I.; Torres, R.; Abadias, M.; Köhl, J.

    2016-01-01

    Abstract:
    The growing interest in biological control has been reflected during last decades in a big number of scientific publications, books and symposia. However, biocontrol commercial application at a European level is limited and biological control products are not currently available for

  17. Production of hydrogen using an anaerobic biological process

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, Robert; Pelter, Libbie S.; Patterson, John A.

    2016-11-29

    Various embodiments of the present invention pertain to methods for biological production of hydrogen. More specifically, embodiments of the present invention pertain to a modular energy system and related methods for producing hydrogen using organic waste as a feed stock.

  18. Reactive species in non-equilibrium atmospheric-pressure plasmas: Generation, transport, and biological effects

    Science.gov (United States)

    Lu, X.; Naidis, G. V.; Laroussi, M.; Reuter, S.; Graves, D. B.; Ostrikov, K.

    2016-05-01

    Non-equilibrium atmospheric-pressure plasmas have recently become a topical area of research owing to their diverse applications in health care and medicine, environmental remediation and pollution control, materials processing, electrochemistry, nanotechnology and other fields. This review focuses on the reactive electrons and ionic, atomic, molecular, and radical species that are produced in these plasmas and then transported from the point of generation to the point of interaction with the material, medium, living cells or tissues being processed. The most important mechanisms of generation and transport of the key species in the plasmas of atmospheric-pressure plasma jets and other non-equilibrium atmospheric-pressure plasmas are introduced and examined from the viewpoint of their applications in plasma hygiene and medicine and other relevant fields. Sophisticated high-precision, time-resolved plasma diagnostics approaches and techniques are presented and their applications to monitor the reactive species and plasma dynamics in the plasma jets and other discharges, both in the gas phase and during the plasma interaction with liquid media, are critically reviewed. The large amount of experimental data is supported by the theoretical models of reactive species generation and transport in the plasmas, surrounding gaseous environments, and plasma interaction with liquid media. These models are presented and their limitations are discussed. Special attention is paid to biological effects of the plasma-generated reactive oxygen and nitrogen (and some other) species in basic biological processes such as cell metabolism, proliferation, survival, etc. as well as plasma applications in bacterial inactivation, wound healing, cancer treatment and some others. Challenges and opportunities for theoretical and experimental research are discussed and the authors' vision for the emerging convergence trends across several disciplines and application domains is presented to

  19. Reactive species in non-equilibrium atmospheric-pressure plasmas: Generation, transport, and biological effects

    Energy Technology Data Exchange (ETDEWEB)

    Lu, X., E-mail: luxinpei@hotmail.com [State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology, Wuhan, Hubei 430074 (China); IFSA Collaborative Innovation Center, Shanghai Jiao Tong University, Shanghai 200240 (China); Naidis, G.V. [Joint Institute for High Temperatures, Russian Academy of Sciences, Moscow 125412 (Russian Federation); Laroussi, M. [Plasma Engineering & Medicine Institute, Old Dominion University, Norfolk, VA 23529 (United States); Reuter, S. [Leibniz Institute for Plasma Science and Technology, Felix-Hausdorff-Strasse 2, 17489 Greifswald (Germany); Graves, D.B. [Department of Chemical and Biomolecular Engineering, University of California, Berkeley, CA 94720 (United States); Ostrikov, K. [Institute for Future Environments, Queensland University of Technology, Brisbane, QLD 4000 (Australia); School of Physics, Chemistry, and Mechanical Engineering, Queensland University of Technology, Brisbane, QLD 4000 (Australia); Commonwealth Scientific and Industrial Research Organization, P.O.Box 218, Lindfield, NSW 2070 (Australia); School of Physics, The University of Sydney, Sydney, NSW 2006 (Australia)

    2016-05-04

    Non-equilibrium atmospheric-pressure plasmas have recently become a topical area of research owing to their diverse applications in health care and medicine, environmental remediation and pollution control, materials processing, electrochemistry, nanotechnology and other fields. This review focuses on the reactive electrons and ionic, atomic, molecular, and radical species that are produced in these plasmas and then transported from the point of generation to the point of interaction with the material, medium, living cells or tissues being processed. The most important mechanisms of generation and transport of the key species in the plasmas of atmospheric-pressure plasma jets and other non-equilibrium atmospheric-pressure plasmas are introduced and examined from the viewpoint of their applications in plasma hygiene and medicine and other relevant fields. Sophisticated high-precision, time-resolved plasma diagnostics approaches and techniques are presented and their applications to monitor the reactive species and plasma dynamics in the plasma jets and other discharges, both in the gas phase and during the plasma interaction with liquid media, are critically reviewed. The large amount of experimental data is supported by the theoretical models of reactive species generation and transport in the plasmas, surrounding gaseous environments, and plasma interaction with liquid media. These models are presented and their limitations are discussed. Special attention is paid to biological effects of the plasma-generated reactive oxygen and nitrogen (and some other) species in basic biological processes such as cell metabolism, proliferation, survival, etc. as well as plasma applications in bacterial inactivation, wound healing, cancer treatment and some others. Challenges and opportunities for theoretical and experimental research are discussed and the authors’ vision for the emerging convergence trends across several disciplines and application domains is presented to

  20. Total synthesis and biological activity of natural product Urukthapelstatin A.

    Science.gov (United States)

    Lin, Chun-Chieh; Tantisantisom, Worawan; McAlpine, Shelli R

    2013-07-19

    Herein we report the first total synthesis of the natural product Urkuthaplestatin A (Ustat A) utilizing a convergent synthetic strategy. The characterization and biological activity match those of the previously published natural product. Interestingly, several intermediates, including the linear and serine cyclized precursors, show a 100-fold decrease in cytotoxicity, with IC50's in the low micromolar range. These data indicate that the rigidity and the consecutive aromatic heterocyclic system are responsible for the biological activity.

  1. Recent Developments in Biological Hydrogen Production Processes

    Directory of Open Access Journals (Sweden)

    DEBABRATA DAS

    2008-07-01

    Full Text Available Biohydrogen production technology can utilize renewable energy sources like biomass for the generation of hydrogen, the cleanest form of energy for the use of mankind. However, major constraints to the commercialization of these processes include lower hydrogen yields and rates of hydrogen production. To overcome these bottlenecks intensive research work has already been carried out on the advancement of these processes such as the development of genetically modified microorganisms, the improvement of the bioreactor design, molecular engineering of the key enzyme hydrogenases, the development of two stage processes, etc. The present paper explores the recent advancements that have been made till date and also presents the state of the art in molecular strategies to improve the hydrogen production.

  2. Electricity-mediated biological hydrogen production

    NARCIS (Netherlands)

    Geelhoed, J.S.; Hamelers, H.V.M.; Stams, A.J.M.

    2010-01-01

    Anaerobic bacteria have the ability to produce electricity from the oxidation of organic substrates. They also may use electricity to support chemical reactions that are energetically unfavorable. In the fermentation of sugars, hydrogen can be formed as one of the main products. However, a yield of

  3. Condensation production in comet tail plasma

    Directory of Open Access Journals (Sweden)

    S. V. Koshevaya

    2000-01-01

    Full Text Available Los solitones producen condensaciones en la cola del cometa, como resultado de su interacci on con el viento solar. Se obtienen las condiciones de excitaci on de las ondas ion ac usticas y polvo-ac usticas. La teor a presentada, trata sobre los solitones ion-ac usticos polvosos en este plasma magnetizado. Se demuestra que la longitud de Debye y el radio de cyclotr on de las part culas de polvo cargadas, de nen la dimensi on transversal de los solitones polvo-ac usticos. Para valores t picos de los par ametros, las dimensiones estimadas de los solitones son de varios Km, lo cual concuerda con los datos obtenidos de las observaciones.

  4. Biological production of liquid fuels from biomass

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-01

    A scheme for the production of liquid fuels from renewable resources such as poplar wood and lignocellulosic wastes from a refuse hydropulper was investigated. The particular scheme being studied involves the conversion of a cellulosic residue, resulting from a solvent delignified lignocellulosic feed, into either high concentration sugar syrups or into ethyl and/or butyl alcohol. The construction of a pilot apparatus for solvent delignifying 150 g samples of lignocellulosic feeds was completed. Also, an analysis method for characterizing the delignified product has been selected and tested. This is a method recommended in the Forage Fiber Handbook. Delignified samples are now being prepared and tested for their extent of delignification and susceptibility to enzyme hydrolysis. Work is continuing on characterizing the cellulase and cellobiase enzyme systems derived from the YX strain of Thermomonospora.

  5. Synthetic biological approaches to natural product biosynthesis.

    Science.gov (United States)

    Winter, Jaclyn M; Tang, Yi

    2012-10-01

    Small molecules produced in Nature possess exquisite chemical diversity and continue to be an inspiration for the development of new therapeutic agents. In their host organisms, natural products are assembled and modified using dedicated biosynthetic pathways. By rationally reprogramming and manipulating these pathways, unnatural metabolites containing enhanced structural features that were otherwise inaccessible can be obtained. Additionally, new chemical entities can be synthesized by developing the enzymes that carry out these complicated chemical reactions into biocatalysts. In this review, we will discuss a variety of combinatorial biosynthetic strategies, their technical challenges, and highlight some recent (since 2007) examples of rationally designed metabolites, as well as platforms that have been established for the production and modification of clinically important pharmaceutical compounds.

  6. Plasma effects in electromagnetic field interaction with biological tissue

    Science.gov (United States)

    Sharma, R. P.; Batra, Karuna; Excell, Peter S.

    2011-02-01

    Theoretical analysis is presented of the nonlinear behavior of charge carriers in biological tissue under the influence of varying low-intensity electromagnetic (EM) field. The interaction occurs because of the nonlinear force arising due to the gradient of the EM field intensity acting on free electrons in the conduction band of proteins in metabolically active biological cell membrane receptors leading to a redistribution of charge carriers. Field dependence of the resulting dielectric constant is investigated by a suitable modification to include an additional electronic contribution term to the three-term Debye model. The exogenous EM field propagating in this nonlinear cellular medium satisfies the nonlinear Schrödinger equation and can be affected significantly. Resulting field effect can be substantially augmented and effective rectification/demodulation can occur. Possible implications of this modification on biological processes in white and grey matter are discussed.

  7. Plasma electrolytic treatment of products after selective laser melting

    Science.gov (United States)

    Kashapov, L. N.; Kashapov, N. F.; Kashapov, R. N.; Denisov, D. G.

    2016-01-01

    The aim of the work was to study the possibilities of plasma electrolytic treatment for cleaning surfaces of metal products obtained by the SLM-technology. We found that the most effective cleaning from the large alloy particles occurs in the "hydrodynamic" mode, when the occurrence of hydrodynamic pulses observed. Further smoothing of irregularities eliminated by a stable burning of discharge in vapor shell. Analysis the morphology of the surface of difficult specialized products, such as crown conical gears, after plasma hydrodynamic treatment showed efficiency and advantages in comparison to conventional methods of final cleaning such as shot blasting.

  8. BIOLOGICALLY ACTIVE SUBSTANCES OF SPIRIT PRODUCTION WASTE

    Directory of Open Access Journals (Sweden)

    A. S. Kayshev

    2014-01-01

    Full Text Available A content of biologically active compounds (BAC with signified pharmacological activity in distillers grains was proved. It is prospective for applications of these grains as a raw material resource of pharmaceuticals. A composition of BAC distillers grains received from wheat, corn, barley, millet at different spirit enterprises which use hydro fermentative grain processing. Considering polydispersity of distillers grains they were separated on solid and liquid phases preliminary. Physical and chemical characteristics of distillers grains' liquid base were identified. Elementary composition of distillers grains is signified by active accumulation of biogenic elements (phosphorus, potassium, magnesium, calcium, sodium, iron and low content of heavy metals. The solid phase of distillers grains accumulates carbon, hydrogen and nitrogen in high concentration. The liquid phase of distillers grains contains: proteins and amino acids (20-46%, reducing sugars (5,6%-17,5%, galacturonides (0,8-1,4%, ascorbic acid (6,2-11,4 mg%. The solid base of distillers grains contains: galacturonides (3,4-5,3%, fatty oil (8,4-11,1% with predomination of essential fatty acids, proteins and amino acids (2,1-2,5%, flavonoids (0,4-0,9%, tocopherols (3,4-7,7 mg%. A method of complex processing of distillers grains based on application of membrane filtering of liquid phase and liquid extraction by inorganic and organic solvents of solid phase, which allows almost full extraction of the sum of biologically active compounds (BAC from liquid phase (Biobardin BM and solid phase (Biobardin UL. Biobardin BM comprises the following elements: proteins and amino acids (41-69%, reducing sugars (3,5-15,6%, fatty oil (0,2-0,3%, flavonoids (0,2-0,7%, ascorbic acid (17-37 mg%. Biobardin UL includes: oligouronids (16,4-19,5%, proteins and amino acids (11-21%, fatty oil (3,2-4,9% which includes essential acids; flavonoids (0,6-1,5%, tocopherols (6,6-10,2 mg%, carotinoids (0,13-0,21 mg

  9. Identification of the biologically active liquid chemistry induced by a nonthermal atmospheric pressure plasma jet.

    Science.gov (United States)

    Wende, Kristian; Williams, Paul; Dalluge, Joe; Gaens, Wouter Van; Aboubakr, Hamada; Bischof, John; von Woedtke, Thomas; Goyal, Sagar M; Weltmann, Klaus-Dieter; Bogaerts, Annemie; Masur, Kai; Bruggeman, Peter J

    2015-06-06

    The mechanism of interaction of cold nonequilibrium plasma jets with mammalian cells in physiologic liquid is reported. The major biological active species produced by an argon RF plasma jet responsible for cell viability reduction are analyzed by experimental results obtained through physical, biological, and chemical diagnostics. This is complemented with chemical kinetics modeling of the plasma source to assess the dominant reactive gas phase species. Different plasma chemistries are obtained by changing the feed gas composition of the cold argon based RF plasma jet from argon, humidified argon (0.27%), to argon/oxygen (1%) and argon/air (1%) at constant power. A minimal consensus physiologic liquid was used, providing isotonic and isohydric conditions and nutrients but is devoid of scavengers or serum constituents. While argon and humidified argon plasma led to the creation of hydrogen peroxide dominated action on the mammalian cells, argon-oxygen and argon-air plasma created a very different biological action and was characterized by trace amounts of hydrogen peroxide only. In particular, for the argon-oxygen (1%), the authors observed a strong negative effect on mammalian cell proliferation and metabolism. This effect was distance dependent and showed a half life time of 30 min in a scavenger free physiologic buffer. Neither catalase and mannitol nor superoxide dismutase could rescue the cell proliferation rate. The strong distance dependency of the effect as well as the low water solubility rules out a major role for ozone and singlet oxygen but suggests a dominant role of atomic oxygen. Experimental results suggest that O reacts with chloride, yielding Cl2(-) or ClO(-). These chlorine species have a limited lifetime under physiologic conditions and therefore show a strong time dependent biological activity. The outcomes are compared with an argon MHz plasma jet (kinpen) to assess the differences between these (at least seemingly) similar plasma sources.

  10. Role of natural product diversity in chemical biology.

    Science.gov (United States)

    Hong, Jiyong

    2011-06-01

    Through the natural selection process, natural products possess a unique and vast chemical diversity and have been evolved for optimal interactions with biological macromolecules. Owing to their diversity, target affinity, and specificity, natural products have demonstrated enormous potential as modulators of biomolecular function, been an essential source for drug discovery, and provided design principles for combinatorial library development.

  11. Improvement of FK506 production by synthetic biology approaches.

    Science.gov (United States)

    Fu, Li-Feng; Tao, Yang; Jin, Mei-Ying; Jiang, Hui

    2016-12-01

    Synthetic biology has been applied to direct improvement of valuable metabolite productions. Tacrolimus (FK506), a clinically used immunosuppressive agent isolated from many Streptomyces, is produced by fermentation in industry. Here we chose FK506 as an example to review recent progress in improving FK506 production, including enhancing transcription levels of biosynthetic genes, accelerating post-translational modification levels of biosynthetic enzymes, increasing activities of rate limiting enzymes, and rational supplement of limited precursors. FK506 production was increased from 25 % to sevenfold by these synthetic biology approaches.

  12. Studies on plasma production in a large volume system using multiple compact ECR plasma sources

    Science.gov (United States)

    Tarey, R. D.; Ganguli, A.; Sahu, D.; Narayanan, R.; Arora, N.

    2017-01-01

    This paper presents a scheme for large volume plasma production using multiple highly portable compact ECR plasma sources (CEPS) (Ganguli et al 2016 Plasma Source Sci. Technol. 25 025026). The large volume plasma system (LVPS) described in the paper is a scalable, cylindrical vessel of diameter  ≈1 m, consisting of source and spacer sections with multiple CEPS mounted symmetrically on the periphery of the source sections. Scaling is achieved by altering the number of source sections/the number of sources in a source section or changing the number of spacer sections for adjusting the spacing between the source sections. A series of plasma characterization experiments using argon gas were conducted on the LVPS under different configurations of CEPS, source and spacer sections, for an operating pressure in the range 0.5-20 mTorr, and a microwave power level in the range 400-500 W per source. Using Langmuir probes (LP), it was possible to show that the plasma density (~1  -  2  ×  1011 cm-3) remains fairly uniform inside the system and decreases marginally close to the chamber wall, and this uniformity increases with an increase in the number of sources. It was seen that a warm electron population (60-80 eV) is always present and is about 0.1% of the bulk plasma density. The mechanism of plasma production is discussed in light of the results obtained for a single CEPS (Ganguli et al 2016 Plasma Source Sci. Technol. 25 025026).

  13. Hydrogen production by biological processes: a survey of literature

    Energy Technology Data Exchange (ETDEWEB)

    Das, Debabrata [Indian Inst. of Technology, Dept. of Biotechnology, Kharagpur (India); Miami Univ., Clean Energy Research Inst., Coral Gables, FL (United States); Veziroglu, T. Nejat [Miami Univ., Clean Energy Research Inst., Coral Gables, FL (United States)

    2001-07-01

    Hydrogen is the fuel of the future mainly due to its high conversion efficiency, recyclability and nonpolluting nature. Biological hydrogen production processes are found to be more environment friendly and less energy intensive as compared to thermochemical and electrochemical processes. They are mostly controlled by either photosynthetic or fermentative organisms. Till today, more emphasis has been given on the former processes. Nitrogenase and hydrogenase play very important roles. Genetic manipulation of cyanobacteria (hydrogenase negative gene) improves the hydrogen generation. The paper presents a survey of biological hydrogen production processes. The micro-organism and biochemical pathways involved in hydrogen generation processes are presented in some detail. Several developmental works are discussed. Immobilised system is found suitable for the continuous hydrogen production. About 28% of energy can be recovered in the form of hydrogen using sucrose as substrate. Fermentative hydrogen production processes have some edge over the other biological processes. (Author)

  14. The Interstellar Production of Biologically Important Organics

    Science.gov (United States)

    Sandford, Scott A.; Bernstein, Max P.; Dworkin, Jason; Allamandola, Louis J.

    2000-01-01

    One of the primary tasks of the Astrochemistry Laboratory at Ames Research Center is to use laboratory simulations to study the chemical processes that occur in dense interstellar clouds. Since new stars are formed in these clouds, their materials may be responsible for the delivery of organics to new habitable planets and may play important roles in the origin of life. These clouds are extremely cold (less than 50 kelvin), and most of the volatiles in these clouds are condensed onto dust grains as thin ice mantles. These ices are exposed to cosmic rays and ultraviolet (UV) photons that break chemical bonds and result in the production of complex molecules when the ices are warmed (as they would be when incorporated into a star-forming region). Using cryovacuum systems and UV lamps, this study simulates the conditions of these clouds and studies the resulting chemistry. Some of the areas of progress made in 1999 are described below. It shows some of the types of molecules that may be formed in the interstellar medium. Laboratory simulations have already confirmed that many of these compounds are made under these conditions.

  15. Hydroxyl radical production in plasma electrolysis with KOH electrolyte solution

    Energy Technology Data Exchange (ETDEWEB)

    Saksono, Nelson; Febiyanti, Irine Ayu, E-mail: irine.ayu41@ui.ac.id; Utami, Nissa; Ibrahim [Department of Chemical Engineering, Universitas Indonesia, Depok 16424, Indonesia Phone: +62217863516, Fax: +62217863515 (Indonesia)

    2015-12-29

    Plasma electrolysis is an effective technology for producing hydroxyl radical (•OH). This method can be used for waste degradation process. This study was conducted to obtain the influence of applied voltage, electrolyte concentration, and anode depth in the plasma electrolysis system for producing hydroxyl radical. The materials of anode and cathode, respectively, were made from tungsten and stainless steel. KOH solution was used as the solution. Determination of hydroxyl radical production was done by measuring H{sub 2}O{sub 2} amount formed in plasma system using an iodometric titration method, while the electrical energy consumed was obtained by measuring the electrical current throughout the process. The highest hydroxyl radical production was 3.51 mmol reached with 237 kJ energy consumption in the power supply voltage 600 V, 0.02 M KOH, and 0.5 cm depth of anode.

  16. Plasma metallurgical production of nanocrystalline borides and carbides

    Science.gov (United States)

    Galevsky, G. V.; Rudneva, V. V.; Cherepanov, A. N.; Galevsky, S. G.; Efimova, K. A.

    2016-09-01

    he experience in production and study of properties of nanocrystalline borides and chromium carbides, titanium, silicon was summarized. The design and features of the vertical three-jet once-through reactor with power 150 kW, used in the plasma metallurgical production, was described. The technological, thermotechnical and resource characteristics of the reactor were identified. The parameters of borides and carbides synthesis, their main characteristics in the nanodispersed state and equipment-technological scheme of production were provided. Evaluation of engineering-and-economical performance of the laboratory and industrial levels of borides and carbides production and the state corresponding to the segment of the world market was carried out.

  17. Plasma-Assisted Pretreatment of Wheat Straw for Ethanol Production

    DEFF Research Database (Denmark)

    Schultz-Jensen, Nadja; Kádár, Zsófia; Thomsen, Anne Belinda

    2011-01-01

    The potential of wheat straw for ethanol production after pretreatment with O3 generated in a plasma at atmospheric pressure and room temperature followed by fermentation was investigated. We found that cellulose and hemicellulose remained unaltered after ozonisation and a subsequent washing step...

  18. Scalable graphene production: perspectives and challenges of plasma applications

    Science.gov (United States)

    Levchenko, Igor; Ostrikov, Kostya (Ken); Zheng, Jie; Li, Xingguo; Keidar, Michael; B. K. Teo, Kenneth

    2016-05-01

    Graphene, a newly discovered and extensively investigated material, has many unique and extraordinary properties which promise major technological advances in fields ranging from electronics to mechanical engineering and food production. Unfortunately, complex techniques and high production costs hinder commonplace applications. Scaling of existing graphene production techniques to the industrial level without compromising its properties is a current challenge. This article focuses on the perspectives and challenges of scalability, equipment, and technological perspectives of the plasma-based techniques which offer many unique possibilities for the synthesis of graphene and graphene-containing products. The plasma-based processes are amenable for scaling and could also be useful to enhance the controllability of the conventional chemical vapour deposition method and some other techniques, and to ensure a good quality of the produced graphene. We examine the unique features of the plasma-enhanced graphene production approaches, including the techniques based on inductively-coupled and arc discharges, in the context of their potential scaling to mass production following the generic scaling approaches applicable to the existing processes and systems. This work analyses a large amount of the recent literature on graphene production by various techniques and summarizes the results in a tabular form to provide a simple and convenient comparison of several available techniques. Our analysis reveals a significant potential of scalability for plasma-based technologies, based on the scaling-related process characteristics. Among other processes, a greater yield of 1 g × h-1 m-2 was reached for the arc discharge technology, whereas the other plasma-based techniques show process yields comparable to the neutral-gas based methods. Selected plasma-based techniques show lower energy consumption than in thermal CVD processes, and the ability to produce graphene flakes of various

  19. Assessment of biological Hydrogen production processes: A review

    Science.gov (United States)

    Najafpour, G. D.; Shahavi, M. H.; Neshat, S. A.

    2016-06-01

    Energy crisis created a special attention on renewable energy sources. Among these sources; hydrogen through biological processes is well-known as the most suitable and renewable energy sources. In terms of process yield, hydrogen production from various sources was evaluated. A summary of microorganisms as potential hydrogen producers discussed along with advantages and disadvantages of several bioprocesses. The pathway of photo-synthetic and dark fermentative organisms was discussed. In fact, the active enzymes involved in performance of biological processes for hydrogen generation were identified and their special functionalities were discussed. The influential factors affecting on hydrogen production were known as enzymes assisting liberation specific enzymes such as nitrogenase, hydrogenase and uptake hydrogenase. These enzymes were quite effective in reduction of proton and form active molecular hydrogen. Several types of photosynthetic systems were evaluated with intension of maximum hydrogen productivities. In addition dark fermentative and light intensities on hydrogen productions were evaluated. The hydrogen productivities of efficient hydrogen producing strains were evaluated.

  20. MILK KEFIR: COMPOSITION, MICROBIAL CULTURES, BIOLOGICAL ACTIVITIES AND RELATED PRODUCTS

    Directory of Open Access Journals (Sweden)

    Maria Rosa Prado

    2015-10-01

    Full Text Available In recent years, there has been a strong focus on beneficial foods with probiotic microorganisms and functional organic substances. In this context, there is an increasing interest in the commercial use of kefir, since it can be marketed as a natural beverage that has health promoting bacteria. There are numerous commercially available kefir based-products. Kefir may act as a matrix in the effective delivery of probiotic microorganisms in different types of products. Also, the presence of kefir’s exopolysaccharides, known as kefiran, which has biological activity, certainly adds value to products. Kefiran can also be used separately in other food products and as a coating film for various food and pharmaceutical products. This article aims to update the information about kefir and its microbiological composition, biological activity of the kefir’s microflora and the importance of kefiran as a beneficial health substance.

  1. Milk kefir: composition, microbial cultures, biological activities, and related products.

    Science.gov (United States)

    Prado, Maria R; Blandón, Lina Marcela; Vandenberghe, Luciana P S; Rodrigues, Cristine; Castro, Guillermo R; Thomaz-Soccol, Vanete; Soccol, Carlos R

    2015-01-01

    In recent years, there has been a strong focus on beneficial foods with probiotic microorganisms and functional organic substances. In this context, there is an increasing interest in the commercial use of kefir, since it can be marketed as a natural beverage that has health promoting bacteria. There are numerous commercially available kefir based-products. Kefir may act as a matrix in the effective delivery of probiotic microorganisms in different types of products. Also, the presence of kefir's exopolysaccharides, known as kefiran, which has biological activity, certainly adds value to products. Kefiran can also be used separately in other food products and as a coating film for various food and pharmaceutical products. This article aims to update the information about kefir and its microbiological composition, biological activity of the kefir's microflora and the importance of kefiran as a beneficial health substance.

  2. Spectrofluorimetric determination of certain biologically active phenothiazines in commercial dosage forms and human plasma.

    Science.gov (United States)

    Mohamed, Abdel-Maaboud I; Abdelmageed, Osama H; Salem, Hesham; Nagy, Dalia M; Omar, Mahmoud A

    2013-01-01

    A validated simple and sensitive spectrofluorimetric method was developed for the determination of chlorpromazine hydrochloride, promethazine hydrochloride, trifluperazine hydrochloride, thioridazine hydrochloride, perazine maleate and oxomemazine. The method was based on condensation of malonic acid/acetic anhydride (MAA) under the catalytic effect of the tertiary amine moiety of the studied phenothiazines to provide a deep yellow to brown colour with green fluorescence. Relative fluorescence intensity of the products was measured at λ exc 398 nm and λ em 432 nm. Different variables affecting the reaction were studied and optimized. The method was successfully applied for the determination of the studied drugs in commercial dosage forms. The lower detection limits allowed the application of this method for the determination of the compounds in plasma as an example of a biological fluid. In addition, the method was considered specific for the determination of tertiary amines in the presence of primary and secondary amines; as a result, it was deemed suitable for the determination of the cited drugs in the presence of their degradation products resulting from N-dealkylation or oxidation of the corresponding sulphoxides or sulphones.

  3. Natural product synthesis at the interface of chemistry and biology.

    Science.gov (United States)

    Hong, Jiyong

    2014-08-11

    Nature has evolved to produce unique and diverse natural products that possess high target affinity and specificity. Natural products have been the richest sources for novel modulators of biomolecular function. Since the chemical synthesis of urea by Wöhler, organic chemists have been intrigued by natural products, leading to the evolution of the field of natural product synthesis over the past two centuries. Natural product synthesis has enabled natural products to play an essential role in drug discovery and chemical biology. With the introduction of novel, innovative concepts and strategies for synthetic efficiency, natural product synthesis in the 21st century is well poised to address the challenges and complexities faced by natural product chemistry and will remain essential to progress in biomedical sciences.

  4. Plasmas for environmental issues: from hydrogen production to 2D materials assembly

    Science.gov (United States)

    Tatarova, E.; Bundaleska, N.; Sarrette, J. Ph; Ferreira, C. M.

    2014-12-01

    It is well recognized at present that the unique, high energy density plasma environment provides suitable conditions to dissociate/atomize molecules in remediation systems, to convert waste and biomass into sustainable energy sources, to purify water, to assemble nanostructures, etc. The remarkable plasma potential is based on its ability to supply simultaneously high fluxes of charged particles, chemically active molecules, radicals (e.g. O, H, OH), heat, highly energetic photons (UV and extreme UV radiation), and strong electric fields in intrinsic sheath domains. Due to this complexity, low-temperature plasma science and engineering is a huge, highly interdisciplinary field that spans many research disciplines and applications across many areas of our daily life and industrial activities. For this reason, this review deals only with some selected aspects of low-temperature plasma applications for a clean and sustainable environment. It is not intended to be a comprehensive survey, but just to highlight some important works and achievements in specific areas. The selected issues demonstrate the diversity of plasma-based applications associated with clean and sustainable ambiance and also show the unity of the underlying science. Fundamental plasma phenomena/processes/features are the common fibers that pass across all these areas and unify all these applications. Browsing through different topics, we try to emphasize these phenomena/processes/features and their uniqueness in an attempt to build a general overview. The presented survey of recently published works demonstrates that plasma processes show a significant potential as a solution for waste/biomass-to-energy recovery problems. The reforming technologies based on non-thermal plasma treatment of hydrocarbons show promising prospects for the production of hydrogen as a future clean energy carrier. It is also shown that plasmas can provide numerous agents that influence biological activity. The simultaneous

  5. The structural biology of enzymes involved in natural product glycosylation.

    Science.gov (United States)

    Singh, Shanteri; Phillips, George N; Thorson, Jon S

    2012-10-01

    The glycosylation of microbial natural products often dramatically influences the biological and/or pharmacological activities of the parental metabolite. Over the past decade, crystal structures of several enzymes involved in the biosynthesis and attachment of novel sugars found appended to natural products have emerged. In many cases, these studies have paved the way to a better understanding of the corresponding enzyme mechanism of action and have served as a starting point for engineering variant enzymes to facilitate to production of differentially-glycosylated natural products. This review specifically summarizes the structural studies of bacterial enzymes involved in biosynthesis of novel sugar nucleotides.

  6. Biological hydrogen production by moderately thermophilic anaerobic bacteria

    Energy Technology Data Exchange (ETDEWEB)

    HP Goorissen; AJM Stams [Laboratory of Microbiology, Wageningen University and Research centre Wageningen (Netherlands)

    2006-07-01

    This study focuses on the biological production of hydrogen at moderate temperatures (65-75 C) by anaerobic bacteria. A survey was made to select the best (moderate) thermophiles for hydrogen production from cellulolytic biomass. From this survey we selected Caldicellulosiruptor saccharolyticus (a gram-positive bacterium) and Thermotoga elfii (a gram-negative bacterium) as potential candidates for biological hydrogen production on mixtures of C{sub 5}-C{sub 6} sugars. Xylose and glucose were used as model substrates to describe growth and hydrogen production from hydrolyzed biomass. Mixed substrate utilization in batch cultures revealed differences in the sequence of substrate consumption and in catabolites repression of the two microorganisms. The regulatory mechanisms of catabolites repression in these microorganisms are not known yet. (authors)

  7. Defending plasma T3 is a biological priority.

    Science.gov (United States)

    Abdalla, Sherine M; Bianco, Antonio C

    2014-11-01

    Triiodothyronine (T3), the active form of thyroid hormone is produced predominantly outside the thyroid parenchyma secondary to peripheral tissue deiodination of thyroxine (T4), with thyroid. In healthy individuals, plasma T3 is regulated by the negative feedback loop of the hypothalamus-pituitary-thyroid axis and by homoeostatic changes in deiodinase expression. Therefore, with the exception of a minimal circadian rhythmicity, serum T3 levels are stable over long periods of time. Studies in rodents indicate that different levels of genetic disruption of the feedback mechanism and deiodinase system are met with increase in serum T4 and thyroid-stimulating hormone (TSH) levels, while serum T3 levels remain stable. These findings have focused attention on serum T3 levels in patients with thyroid disease, with important clinical implications affecting therapeutic goals and choice of therapy for patients with hypothyroidism. Although monotherapy with levothyroxine is the standard of care for hypothyroidism, not all patients normalize serum T3 levels with many advocating for combination therapy with levothyroxine and liothyronine. The latter could be relevant for a significant number of patients that remain symptomatic on monotherapy with levothyroxine, despite normalization of serum TSH levels. © 2014 John Wiley & Sons Ltd.

  8. Continuous downstream processing for high value biological products: A Review.

    Science.gov (United States)

    Zydney, Andrew L

    2016-03-01

    There is growing interest in the possibility of developing truly continuous processes for the large-scale production of high value biological products. Continuous processing has the potential to provide significant reductions in cost and facility size while improving product quality and facilitating the design of flexible multi-product manufacturing facilities. This paper reviews the current state-of-the-art in separations technology suitable for continuous downstream bioprocessing, focusing on unit operations that would be most appropriate for the production of secreted proteins like monoclonal antibodies. This includes cell separation/recycle from the perfusion bioreactor, initial product recovery (capture), product purification (polishing), and formulation. Of particular importance are the available options, and alternatives, for continuous chromatographic separations. Although there are still significant challenges in developing integrated continuous bioprocesses, recent technological advances have provided process developers with a number of attractive options for development of truly continuous bioprocessing operations.

  9. Synthetic biology of avermectin for production improvement and structure diversification.

    Science.gov (United States)

    Zhuo, Ying; Zhang, Tao; Wang, Qi; Cruz-Morales, Pablo; Zhang, Buchang; Liu, Mei; Barona-Gómez, Francisco; Zhang, Lixin

    2014-03-01

    Natural products are still key sources of current clinical drugs and innovative therapeutic agents. Since wild-type microorganisms only produce natural products in very small quantities, yields of production strains need to be improved by breaking down the precise genetic and biochemical circuitry. Herein, we use avermectins as an example of production improvement and chemical structure diversification by synthetic biology. Avermectins are macrocyclic lactones produced by Streptomyces avermitilis and are well known and widely used for antiparasitic therapy. Given the importance of this molecule and its derivatives, many efforts and strategies were employed to improve avermectin production and generate new active analogues. This review describes the current status of synthetic strategies successfully applied for developing natural-product-producing strains and discusses future prospects for the application of enhanced avermectin production. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. ELECTROLYTIC-PLASMA TREATMENT OF INNER SURFACE OF TUBULAR PRODUCTS

    Directory of Open Access Journals (Sweden)

    Yu. G. Alekseev

    2016-01-01

    Full Text Available While manufacturing a number of important tubular products stringent requirements have been imposed on quality of their inner surfaces. The well-known methods for inner surface treatment of pipes include sandblasting, chemical cleaning with acid reagents (oxalic, formic, sulfamic, orthophosphoric acids and electrochemical polishing. Disadvantages of the chemical method are cleaning-up irregularities, high metal removal, limited number of reagent application, complicated selection of reagent chemical composition and concentration, complicated and environmentally harmful recycling of waste chemicals, high cost of reagents. Low productivity at a high cost, as well as hazardous impact on personnel due to high dispersion of abrasive dust are considered as disadvantages of sandblasting. Electrochemical polishing is characterized by the following disadvantages: low processing productivity because supply of high currents is rather difficult due to electrolyte scattering capacity away from the main electrode action zone, limited length of the cavity to be treated due to heating of flexible current leads at operating current densities, application of expensive aggressive electrolytes and high costs of their recycling. A new method for polishing and cleaning of inner surfaces of tubular products based on electrolyte-plasma treatment has been developed. In comparison with the existing methods the proposed methods ensures quality processing with high intensity while applying non-toxic, environmentally friendly and cheap electrolytes. The paper presents results of investigations on technological specific features of electrolyte-plasma treatment for inner surfaces of tubular products: influence of slotted nozzle width, electrolyte flow and rate on stability of gas-vapor blanket, current density and productivity. Results of the research have made it possible to determine modes that provide stability and high productivity in the process of electrolyte-plasma

  11. Clinical and Biological Principles of Cold Atmospheric Plasma Application in Skin Cancer.

    Science.gov (United States)

    Gay-Mimbrera, Jesús; García, Maria Carmen; Isla-Tejera, Beatriz; Rodero-Serrano, Antonio; García-Nieto, Antonio Vélez; Ruano, Juan

    2016-06-01

    Plasma-based electrosurgical devices have long been employed for tissue coagulation, cutting, desiccation, and cauterizing. Despite their clinical benefits, these technologies involve tissue heating and their effects are primarily heat-mediated. Recently, there have been significant developments in cold atmospheric pressure plasma (CAP) science and engineering. New sources of CAP with well-controlled temperatures below 40 °C have been designed, permitting safe plasma application on animal and human bodies. In the last decade, a new innovative field, often referred to as plasma medicine, which combines plasma physics, life science, and clinical medicine has emerged. This field aims to exploit effects of mild plasma by controlling the interactions between plasma components (and other secondary species that can be formed from these components) with specific structural elements and functionalities of living cells. Recent studies showed that CAP can exert beneficial effects when applied selectively in certain pathologies with minimal toxicity to normal tissues. The rapid increase in new investigations and development of various devices for CAP application suggest early adoption of cold plasma as a new tool in the biomedical field. This review explores the latest major achievements in the field, focusing on the biological effects, mechanisms of action, and clinical evidence of CAP applications in areas such as skin disinfection, tissue regeneration, chronic wounds, and cancer treatment. This information may serve as a foundation for the design of future clinical trials to assess the efficacy and safety of CAP as an adjuvant therapy for skin cancer.

  12. A new type of plasma knife and its effect on biological issues--a pilot study.

    Science.gov (United States)

    Justan, I; Tichý, F; Slavícek, P

    2010-01-01

    Currently, several types of plasma discharge devices have become established for performing surgical procedures or superficial sterilization. Our goal is to introduce a brand new type of plasma discharge device with different characteristics, which we have used for two experiments involving thermal damage to biological tissues. A plasma discharge device with the following characteristics was used for all incisions in plasma group: radio frequency barrier discharger at atmospheric pressure with a working frequency of 13.56 MHz. The working gas was Argon. We used a Cesar 136 generator with typical power 100-150W and with a working gas flow rate between 0.5 and 3 litres per minute. The inner diameter of the end of the nozzle was 0.4mm. A standard Martin electrotome was used for all comparative incisions in the electrotome group. We used two experimental fresh rat cadavers, employing their skin, tails, lungs, livers, kidneys and spleens to make a comparative study between incisions made with a plasma discharge knife and those made with a standard electrotome device. All samples underwent histological verification. Our experiment showed slight differences in the impact on incision edges made by the plasma knife and the electrotome. The most interesting effect is on the skin: the plasma knife does not damage hair bulbs, and it results in less thermal damage. The plasma discharge knife is a promising device for cutting various biological tissues. Its effect can be compared with a standard electrotome, while in some tissues it causes less harm then an electrotome. Moreover, we can adjust its therapeutic effect. However, we do not consider the plasma knife a better choice at present, because maneuvering it is unwieldy.

  13. Assessment of the biological variation of plasma tissue inhibitor of metalloproteinases-1

    DEFF Research Database (Denmark)

    2008-01-01

    BACKGROUND: Tissue inhibitor of metalloproteinases-1 (TIMP-1) measurements in plasma may be useful for the early detection and prognosis of colorectal cancer (CRC). Data on analytical performance and normal intra- and interindividual biological variation are required in order to interpret the uti...

  14. Technical suitability mapping of feedstocks for biological hydrogen production

    NARCIS (Netherlands)

    Panagiotopoulos, I.A.; Karaoglanoglou, L.S.; Koullas, D.P.; Bakker, R.R.; Claassen, P.A.M.; Koukios, E.G.

    2015-01-01

    The objective of this work was to map and compare the technical suitability of different raw materials for biological hydrogen production. Our model was based on hydrogen yield potential, sugar mobilization efficiency, fermentability and coproduct yield and value. The suitability of the studied r

  15. Plasma mediated ablation of biological tissues with ultrashort laser pulses

    Energy Technology Data Exchange (ETDEWEB)

    Oraevsky, A.A. [Lawrence Livermore National Lab., CA (United States)]|[Rice Univ., Houston, TX (United States). Dept. of Electrical Engineering; DaSilva, L.B.; Feit, M.D. [Lawrence Livermore National Lab., CA (United States)] [and others

    1995-03-08

    Plasma mediated ablation of collagen gels and porcine cornea was studied at various laser pulse durations in the range from 350 fs to 1 ns at 1,053 nm wavelength. A time resolved stress detection technique was employed to measure transient stress profiles and amplitudes. Optical microscopy was used to characterize ablation craters qualitatively, while a wide band acoustic transducer helped to quantify tissue mechanical response and the ablation threshold. The ablation threshold was measured as a function of laser pulse duration and linear absorption coefficient. For nanosecond pulses the ablation threshold was found to have a strong dependence on the linear absorption coefficient of the material. As the pulse length decreased into the subpicosecond regime the ablation threshold became insensitive to the linear absorption coefficient. The ablation efficiency was found to be insensitive to both the laser pulse duration and the linear absorption coefficient. High quality ablation craters with no thermal or mechanical damage to surrounding material were obtained with 350 fs laser pulses. The mechanism of optical breakdown at the tissue surface was theoretically investigated. In the nanosecond regime, optical breakdown proceeds as an electron collisional avalanche ionization initiated by thermal seed electrons. These seed electrons are created by heating of the tissue by linear absorption. In the ultrashort pulse range, optical breakdown is initiated by the multiphoton ionization of the irradiated medium (6 photons in case of tissue irradiated at 1,053 nm wavelength), and becomes less sensitive to the linear absorption coefficient. The energy deposition profile is insensitive to both the laser pulse duration and the linear absorption coefficient.

  16. Collaborative Research. Fundamental Science of Low Temperature Plasma-Biological Material Interactions

    Energy Technology Data Exchange (ETDEWEB)

    Graves, David Barry [Univ. California, Berkeley, CA (United States); Oehrlein, Gottlieb [Univ. of Maryland, College Park, MD (United States)

    2014-09-01

    Low temperature plasma (LTP) treatment of biological tissue is a promising path toward sterilization of bacteria due to its versatility and ability to operate under well-controlled and relatively mild conditions. The present collaborative research of an interdisciplinary team of investigators at University of Maryland, College Park (UMD), and University of California, Berkeley (UCB) focused on establishing our knowledge based with regard to low temperature plasma-induced chemical modifications in biomolecules that result in inactivation due to various plasma species, including ions, reactive radicals, and UV/VUV photons. The overall goals of the project were to identify and quantify the mechanisms by which low and atmospheric pressure plasma deactivates endotoxic biomolecules. Additionally, we wanted to understand the mechanism by which atmospheric pressure plasmas (APP) modify surfaces and how these modifications depend on the interaction of APP with the environment. Various low pressure plasma sources, a vacuum beam system and several atmospheric pressure plasma sources were used to accomplish this. In our work we elucidated for the first time the role of ions, VUV photons and radicals in biological deactivation of representative biomolecules, both in a UHV beam system and an inductively coupled, low pressure plasma system, and established the associated atomistic biomolecule changes. While we showed that both ions and VUV photons can be very efficient in deactivation of biomolecules, significant etching and/or deep modification (~200 nm) accompanied these biological effects. One of the most important findings in this work is the significant radical-induced deactivation and surface modification can occur with minimal etching. However, if radical fluxes and corresponding etch rates are relatively high, for example at atmospheric pressure, endotoxic biomolecule film inactivation may require near-complete removal of the film. These findings motivated further work at

  17. Sustainability of a public system for plasma collection, contract fractionation and plasma-derived medicinal product manufacturing.

    Science.gov (United States)

    Grazzini, Giuliano; Ceccarelli, Anna; Calteri, Deanna; Catalano, Liviana; Calizzani, Gabriele; Cicchetti, Americo

    2013-09-01

    In Italy, the financial reimbursement for labile blood components exchanged between Regions is regulated by national tariffs defined in 1991 and updated in 1993-2003. Over the last five years, the need for establishing standard costs of healthcare services has arisen critically. In this perspective, the present study is aimed at defining both the costs of production of blood components and the related prices, as well as the prices of plasma-derived medicinal products obtained by national plasma, to be used for interregional financial reimbursement. In order to analyse the costs of production of blood components, 12 out 318 blood establishments were selected in 8 Italian Regions. For each step of the production process, driving costs were identified and production costs were. To define the costs of plasma-derived medicinal products obtained by national plasma, industrial costs currently sustained by National Health Service for contract fractionation were taken into account. The production costs of plasma-derived medicinal products obtained from national plasma showed a huge variability among blood establishments, which was much lower after standardization. The new suggested plasma tariffs were quite similar to those currently in force. Comparing the overall costs theoretically sustained by the National Health Service for plasma-derived medicinal products obtained from national plasma to current commercial costs, demonstrates that the national blood system could gain a 10% cost saving if it were able to produce plasma for fractionation within the standard costs defined in this study. Achieving national self-sufficiency through the production of plasma-derived medicinal products from national plasma, is a strategic goal of the National Health Service which must comply not only with quality, safety and availability requirements but also with the increasingly pressing need for economic sustainability.

  18. Understanding neutron production in the deuterium dense plasma focus

    Energy Technology Data Exchange (ETDEWEB)

    Appelbe, Brian, E-mail: b.appelbe07@imperial.ac.uk, E-mail: j.chittenden@imperial.ac.uk; Chittenden, Jeremy, E-mail: b.appelbe07@imperial.ac.uk, E-mail: j.chittenden@imperial.ac.uk [The Blackett Laboratory, Imperial College London, SW7 2AZ (United Kingdom)

    2014-12-15

    The deuterium Dense Plasma Focus (DPF) can produce copious amounts of MeV neutrons and can be used as an efficient neutron source. However, the mechanism by which neutrons are produced within the DPF is poorly understood and this limits our ability to optimize the device. In this paper we present results from a computational study aimed at understanding how neutron production occurs in DPFs with a current between 70 kA and 500 kA and which parameters can affect it. A combination of MHD and kinetic tools are used to model the different stages of the DPF implosion. It is shown that the anode shape can significantly affect the structure of the imploding plasma and that instabilities in the implosion lead to the generation of large electric fields at stagnation. These electric fields can accelerate deuterium ions within the stagnating plasma to large (>100 keV) energies leading to reactions with ions in the cold dense plasma. It is shown that the electromagnetic fields present can significantly affect the trajectories of the accelerated ions and the resulting neutron production.

  19. 9 CFR 103.2 - Disposition of animals administered experimental biological products or live organisms.

    Science.gov (United States)

    2010-01-01

    ... experimental biological products or live organisms. 103.2 Section 103.2 Animals and Animal Products ANIMAL AND... PRODUCTS; ORGANISMS AND VECTORS EXPERIMENTAL PRODUCTION, DISTRIBUTION, AND EVALUATION OF BIOLOGICAL PRODUCTS PRIOR TO LICENSING § 103.2 Disposition of animals administered experimental biological products...

  20. PERSPECTIVES FOR DEVELOPMENT OF THE BIOLOGIC PLUM PRODUCTION IN BULGARIA

    Directory of Open Access Journals (Sweden)

    Ivanka Vitanova

    2014-03-01

    Full Text Available The Bulgarian plum cultivars Gabrovska, Nevena, Strinava, Guliaeva and Balvanska slava, breeding in the Plum Experimental Station in the town of Dryanovo and the introduced cultivars Stanley, Chachanska lepotitsa, Opal, Malvazinka, Hramova renkloda, Tuleu timpuriu, Althan’s Gage, Pacific, Mirabell de Nancy, Anna Schpet and Jojo, what are high productive and are tolerant to sharka and other important economic plum diseases are suitable for the biologic plum production. The organic fertilization is a basic element of the technology for the biologic plum production. The fertilization with manure and the green manure with a winter green peas and with a peas-rye mix increased the humus content, influenced positive action on the supplying of the plum plants with the main nutrient macro elements, increased the yield and to be able apply successfully in the plum orchards and at not irrigation conditions.

  1. Reinvigorating natural product combinatorial biosynthesis with synthetic biology.

    Science.gov (United States)

    Kim, Eunji; Moore, Bradley S; Yoon, Yeo Joon

    2015-09-01

    Natural products continue to play a pivotal role in drug-discovery efforts and in the understanding if human health. The ability to extend nature's chemistry through combinatorial biosynthesis--altering functional groups, regiochemistry and scaffold backbones through the manipulation of biosynthetic enzymes--offers unique opportunities to create natural product analogs. Incorporating emerging synthetic biology techniques has the potential to further accelerate the refinement of combinatorial biosynthesis as a robust platform for the diversification of natural chemical drug leads. Two decades after the field originated, we discuss the current limitations, the realities and the state of the art of combinatorial biosynthesis, including the engineering of substrate specificity of biosynthetic enzymes and the development of heterologous expression systems for biosynthetic pathways. We also propose a new perspective for the combinatorial biosynthesis of natural products that could reinvigorate drug discovery by using synthetic biology in combination with synthetic chemistry.

  2. Modeling production of e+/--pair plasma in AGNs

    Science.gov (United States)

    Ford, Alex; Medvedev, Mikhail V.

    2016-10-01

    Processes around spinning supermassive black holes in active galactic nuclei (AGN) are believed to determine how relativistic jets are launched and how the black hole energy is extracted. The key question in these processes is the origin of plasma in black hole magnetospheres. The only reasonable mechanism is believed to be the electron-position cascade - the multistage process involving seed photons from an accretion disk, which are Compton up-scattered by charges accelerated in a gap region of a force-free magnetosphere with subsequent photon-photon pair production. In order to explore the process of the e+/- plasma production, we developed a numerical code which models the dynamics of the cascade along magnetic field lines. We demonstrate that plasma production is sensitive to the spectrum of the ambient photon and magnetic fields, the black hole mass and spin, and other parameters. We discuss the results and observational predictions. Supported by KU CLAS and DOE Grant ID0000225143 (07/01/16).

  3. Entropy production and inward heat pinch of plasma

    Energy Technology Data Exchange (ETDEWEB)

    Itoh, Kimitaka [National Inst. for Fusion Science, Nagoya (Japan); Itoh, Sanae

    1996-02-01

    Heat pinch phenomena in the plasma with peripheral heating is discussed from the view point of thermodynamics. The entropy production rate associated with inward energy flow in the presence of energy exchange between electrons and ions is calculated. The inward energy flow can increase the total entropy production rate. It is conjectured that the outward energy flow of colder species (say ions) could sustain the energy flux of hotter species (say electrons) in the core, which flows into the direction of higher temperature. (author)

  4. Capturing Biological Activity in Natural Product Fragments by Chemical Synthesis.

    Science.gov (United States)

    Crane, Erika A; Gademann, Karl

    2016-03-14

    Natural products have had an immense influence on science and have directly led to the introduction of many drugs. Organic chemistry, and its unique ability to tailor natural products through synthesis, provides an extraordinary approach to unlock the full potential of natural products. In this Review, an approach based on natural product derived fragments is presented that can successfully address some of the current challenges in drug discovery. These fragments often display significantly reduced molecular weights, reduced structural complexity, a reduced number of synthetic steps, while retaining or even improving key biological parameters such as potency or selectivity. Examples from various stages of the drug development process up to the clinic are presented. In addition, this process can be leveraged by recent developments such as genome mining, antibody-drug conjugates, and computational approaches. All these concepts have the potential to identify the next generation of drug candidates inspired by natural products.

  5. 78 FR 78796 - Supplemental Applications Proposing Labeling Changes for Approved Drugs and Biological Products...

    Science.gov (United States)

    2013-12-27

    ... Applications Proposing Labeling Changes for Approved Drugs and Biological Products; Correction and Extension of... holders of an approved drug or biological product to change the product labeling to reflect certain types... biological product to change the product labeling to reflect certain types of newly acquired information...

  6. Systems biology approaches to understand natural products biosynthesis

    Directory of Open Access Journals (Sweden)

    Cuauhtemoc eLicona-Cassani

    2015-12-01

    Full Text Available Actinomycetes populate soils and aquatic sediments which impose biotic and abiotic challenges for their survival. As a result, actinomycetes metabolism and genomes have evolved to produce an overwhelming diversity of specialized molecules. Polyketides, non-ribosomal peptides, post-translationally modified peptides, lactams and terpenes are well known bioactive natural products with enormous industrial potential. Accessing such biological diversity has proven difficult due to the complex regulation of cellular metabolism in actinomycetes and to the sparse knowledge of their physiology. The past decade, however, has seen the development of omics technologies that have significantly contributed to our better understanding of their biology. Key observations have contributed towards a shift in the exploitation of actinomycetes biology, such as using their full genomic potential, activating entire pathways through key metabolic elicitors and pathway engineering to improve biosynthesis. Here, we review recent efforts devoted to achieving enhanced discovery, activation and manipulation of natural product biosynthetic pathways in model actinomycetes using genome-scale biological datasets.

  7. 21 CFR 600.14 - Reporting of biological product deviations by licensed manufacturers.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Reporting of biological product deviations by... HEALTH AND HUMAN SERVICES (CONTINUED) BIOLOGICS BIOLOGICAL PRODUCTS: GENERAL Establishment Standards § 600.14 Reporting of biological product deviations by licensed manufacturers. (a) Who must report...

  8. Reproductive biology traits affecting productivity of sour cherry

    Directory of Open Access Journals (Sweden)

    Milica Fotiric Aksic

    2013-01-01

    Full Text Available The objective of this work was to evaluate variability in reproductive biology traits and the correlation between them in genotypes of 'Oblačinska' sour cherry (Prunus cerasus. High genetic diversity was found in the 41 evaluated genotypes, and significant differences were observed among them for all studied traits: flowering time, pollen germination, number of fruiting branches, production of flower and fruit, number of flowers per bud, fruit set, and limb yield efficiency. The number of fruiting branches significantly influenced the number of flower and fruit, fruit set, and yield efficiency. In addition to number of fruiting branches, yield efficiency was positively correlated with fruit set and production of flower and fruit. Results from principal component analysis suggested a reduction of the reproductive biology factors affecting yield to four main characters: number and structure of fruiting branches, flowering time, and pollen germination. Knowledge of the reproductive biology of the 'Oblačinska' genotypes can be used to select the appropriate ones to be grown or used as parents in breeding programs. In this sense, genotypes II/2, III/9, III/13, and III/14 have very good flower production and satisfactory pollen germination.

  9. Formate Formation and Formate Conversion in Biological Fuels Production

    Directory of Open Access Journals (Sweden)

    Bryan R. Crable

    2011-01-01

    Full Text Available Biomethanation is a mature technology for fuel production. Fourth generation biofuels research will focus on sequestering CO2 and providing carbon-neutral or carbon-negative strategies to cope with dwindling fossil fuel supplies and environmental impact. Formate is an important intermediate in the methanogenic breakdown of complex organic material and serves as an important precursor for biological fuels production in the form of methane, hydrogen, and potentially methanol. Formate is produced by either CoA-dependent cleavage of pyruvate or enzymatic reduction of CO2 in an NADH- or ferredoxin-dependent manner. Formate is consumed through oxidation to CO2 and H2 or can be further reduced via the Wood-Ljungdahl pathway for carbon fixation or industrially for the production of methanol. Here, we review the enzymes involved in the interconversion of formate and discuss potential applications for biofuels production.

  10. Assessment of the biological variation of plasma tissue inhibitor of metalloproteinases-1

    DEFF Research Database (Denmark)

    Frederiksen, Camilla; Lomholt, A F; Lottenburger, T

    2008-01-01

    the utility of TIMP-1 in CRC. The aim of this study was to establish the biological and analytical variation of plasma TIMP-1 in volunteers. MATERIAL AND METHODS: Three separate studies were undertaken. 1: Plasma was collected from 23 volunteers 6 times within a 3-week period, first in September 2004 (round.......4%, and the intraclass correlation was 46.2%. Comparison between the 3 rounds and time of collection showed that TIMP-1 values decreased by 11% after storage for more than 16 months (p=0.0002). A systematic circadian variation in plasma TIMP-1 levels was not observed (p=0.17). No significant variation of plasma TIMP-1...... was found in relation to physical exercise (p=0.92 [global test]). CONCLUSION: Levels of plasma TIMP-1 in volunteers show limited circadian, day-to-day, week-to-week and season-to-season variation. In addition, physical exercise has no impact on plasma TIMP-1 levels. Possible storage-dependent decreases...

  11. Hydrogen production from dimethyl ether using corona discharge plasma

    Science.gov (United States)

    Zou, Ji-Jun; Zhang, Yue-Ping; Liu, Chang-Jun

    Dimethyl ether (DME), with its non-toxic character, high H/C ratio and high-energy volumetric density, is an ideal resource for hydrogen production. In this work, hydrogen production from the decomposition of DME using corona discharge has been studied. The corona discharge plasma decomposition was conducted at ambient conditions. The effects of dilution gas (argon), flow rate, frequency and waveforms on the DME decomposition were investigated. The addition of dilution gas can significantly increase the hydrogen production rate. The highest hydrogen production rate with the lowest energy consumption presents at the flow rate of 27.5 Nml min -1. AC voltage is more favored than DC voltage for the production of hydrogen with less energy input. The optimal frequency is 2.0 kHz. The hydrogen production rate is also affected by the input waveform and decreases as following: sinusoid triangular > sinusoid > ramp > square, whereas the sinusoid waveform shows the highest energy efficiency. The corona discharge decomposition of DME is leading to a simple, easy and convenient hydrogen production with no needs of catalyst and external heating.

  12. Titanium Metal Powder Production by the Plasma Quench Process

    Energy Technology Data Exchange (ETDEWEB)

    R. A. Cordes; A. Donaldson

    2000-09-01

    The goals of this project included the scale-up of the titanium hydride production process to a production rate of 50 kg/hr at a purity level of 99+%. This goal was to be achieved by incrementally increasing the production capability of a series of reactor systems. This methodic approach was designed to allow Idaho Titanium Technologies to systematically address the engineering issues associated with plasma system performance, and powder collection system design and performance. With quality powder available, actual fabrication with the titanium hydride was to be pursued. Finally, with a successful titanium production system in place, the production of titanium aluminide was to be pursued by the simultaneously injection of titanium and aluminum precursors into the reactor system. Some significant accomplishments of the project are: A unique and revolutionary torch/reactor capable of withstanding temperatures up to 5000 C with high thermal efficiency has been operated. The dissociation of titanium tetrachloride into titanium powder and HC1 has been demonstrated, and a one-megawatt reactor potentially capable of producing 100 pounds per hour has been built, but not yet operated at the powder level. The removal of residual subchlorides and adsorbed HC1 and the sintering of powder to form solid bodies have been demonstrated. The production system has been operated at production rates up to 40 pounds per hour. Subsequent to the end of the project, Idaho Titanium Technologies demonstrated that titanium hydride powder can indeed be sintered into solid titanium metal at 1500 C without sintering aids.

  13. 75 FR 33312 - Indexing Structured Product Labeling for Human Prescription Drug and Biological Products; Request...

    Science.gov (United States)

    2010-06-11

    ... HUMAN SERVICES Food and Drug Administration Indexing Structured Product Labeling for Human Prescription... Evaluation and Research (CDER) and Center for Biologics Evaluation and Research (CBER) are indexing certain... class as a top priority for indexing of product labeling information. FDA is now announcing that...

  14. Inductively coupled plasma mass spectrometry in the analysis of biological samples and pharmaceutical drugs

    Science.gov (United States)

    Ossipov, K.; Seregina, I. F.; Bolshov, M. A.

    2016-04-01

    Inductively coupled plasma mass spectrometry (ICP-MS) is widely used in the analysis of biological samples (whole blood, serum, blood plasma, urine, tissues, etc.) and pharmaceutical drugs. The shortcomings of this method related to spectral and non-spectral interferences are manifested in full measure in determination of the target analytes in these complex samples strongly differing in composition. The spectral interferences are caused by similarity of masses of the target component and sample matrix components. Non-spectral interferences are related to the influence of sample matrix components on the physicochemical processes taking place during formation and transportation of liquid sample aerosols into the plasma, on the value and spatial distribution of plasma temperature and on the transmission of the ion beam from the interface to mass spectrometer detector. The review is devoted to analysis of different mechanisms of appearance of non-spectral interferences and to ways for their minimization or elimination. Special attention is paid to the techniques of biological sample preparation, which largely determine the mechanisms of the influence of sample composition on the results of element determination. The ways of lowering non-spectral interferences by instrumental parameter tuning and application of internal standards are considered. The bibliography includes 189 references.

  15. Biological treatment of chicken feather waste for improved biogas production

    Institute of Scientific and Technical Information of China (English)

    Gergely Forgács; Saeid Alinezhad; Amir Mirabdollah; Elisabeth Feuk-Lagerstedt; Ilona Sárvári Horwáth

    2011-01-01

    A two-stage system was developed which combines the biological degradation of keratin-rich waste with the production of biogas.Chicken feather waste was treated biologically with a recombinant Bacillus megaterium strain showing keratinase activity prior to biogas production.Chopped,autoclaved chicken feathers (4%,W/V) were completely degraded,resulting in a yellowish fermentation broth with a level of 0.51 mg/mL soluble proteins after 8 days of cultivation of the recombinant strain.During the subsequent anaerobic batch digestion experiments,methane production of 0.35 Nm3/kg dry feathers (i.e.,0.4 Nm3/kg volatile solids of feathers),corresponding to 80% of the theoretical value on proteins,was achieved from the feather hydrolyzates,independently of the prehydrolysis time period of 1,2 or 8 days.Cultivation with a native keratinase producing strain,Bacillus licheniformis resulted in only 0.25 mg/mL soluble proteins in the feather hydrolyzate,which then was digested achieving a maximum accumulated methane production of 0.31 Nm3/kg dry feathers.Feather hydrolyzates treated with the wild type B.megaterium produced 0.21 Nm3 CH4/kg dry feathers as maximum yield.

  16. 9 CFR 113.29 - Determination of moisture content in desiccated biological products.

    Science.gov (United States)

    2010-01-01

    ... desiccated biological products. 113.29 Section 113.29 Animals and Animal Products ANIMAL AND PLANT HEALTH... biological products. Methods provided in this section must be used when a determination of moisture content in desiccated biological products is prescribed in an applicable Standard Requirement or in the...

  17. 9 CFR 105.3 - Notices re: worthless, contaminated, dangerous, or harmful biological products.

    Science.gov (United States)

    2010-01-01

    ..., dangerous, or harmful biological products. 105.3 Section 105.3 Animals and Animal Products ANIMAL AND PLANT... Notices re: worthless, contaminated, dangerous, or harmful biological products. (a) If at any time it...-Serum-Toxin Act, of any biological product by any person holding a license or permit may be dangerous...

  18. Microgravity Production of Nanoparticles of Novel Materials Using Plasma Synthesis

    Science.gov (United States)

    Frenklach, Michael; Fernandez-Pello, Carlos

    2001-01-01

    The research goal is to study the formation in reduced gravity of high quality nanoparticulate of novel materials using plasma synthesis. Particular emphasis will be placed on the production of powders of non-oxide materials like diamond, SiC, SiN, c-BN, etc. The objective of the study is to investigate the effect of gravity on plasma synthesis of these materials, and to determine how the microgravity synthesis can improve the quality and yield of the nanoparticles. It is expected that the reduced gravity will aid in the understanding of the controlling mechanisms of plasma synthesis, and will increase the yield, and quality of the synthesized powder. These materials have properties of interest in several industrial applications, such as high temperature load bearings or high speed metal machining. Furthermore, because of the nano-meter size of the particulate produced in this process, they have specific application in the fabrication of MEMS based combustion systems, and in the development and growth of nano-systems and nano-structures of these materials. These are rapidly advancing research areas, and there is a great need for high quality nanoparticles of different materials. One of the primary systems of interest in the project will be gas-phase synthesis of nanopowder of non-oxide materials.

  19. ROS/RNS Production in Water Using Various Discharge Plasma

    Science.gov (United States)

    Takahashi, Kazuhiro; Satoh, Kohki; Itoh, Hidenori; Kawaguchi, Hideki; Timoshkin, Igor; Given, Martin; MacGregor, Scott

    2015-09-01

    A pulsed discharge, a DC corona discharge and an atmospheric pressure plasma jet are generated above water, the off-gas of a packed-bed dielectric barrier discharge (PB-DBD) is sparged into water, and then reactive oxygen species and reactive nitrogen species in the water are investigated. H2O2, NO3- and a trace of NO2- are produced in the water after the plasma exposure. H2O2 concentration decreases when NO3- concentration increases, so that this is likely that OH radical to produce H2O2 by OH + OH -->H2O2 is consumed in the NO3- production by NO2 + OH --> HNO3 --> NO3-+ H+ (in water). Since no species is detected in water by the sparging of the PB-DBD off-gas containing more than 1000 ppm of O3, O3 does not contribute to produce H2O2 in water. Further, only NO3- is produced by the sparging of the off-gas containing N2O5 and HNO3. This leads that H2O2 and NO2- can be produced by short-lifetime species in plasma. In this work, the highest generation efficiency of H2O2 and NO2- are respectively 3,820 μg/Wh and 830 μg/Wh by the pulsed-plasma exposure, and that of NO3- is 2,530 μg/Wh by the off-gas sparging of the PB-DBD.

  20. Molecular biology in studies of oceanic primary production

    Energy Technology Data Exchange (ETDEWEB)

    LaRoche, J.; Falkowski, P.G. [Brookhaven National Lab., Upton, NY (United States); Geider, R. [Delaware Univ., Lewes, DE (United States). Coll. of Marine Studies

    1992-07-01

    Remote sensing and the use of moored in situ instrumentation has greatly improved our ability to measure phytoplankton chlorophyll and photosynthesis on global scales with high temporal resolution. However, the interpretation of these measurements and their significance with respect to the biogeochemical cycling of carbon relies on their relationship with physiological and biochemical processes in phytoplankton. For example, the use of satellite images of surface chlorophyll to estimate primary production is often based on the functional relationship between photosynthesis and irradiance. A variety of environmental factors such as light, temperature, nutrient availability affect the photosynthesis/irradiance (P vs I) relationship in phytoplankton. We present three examples showing how molecular biology can be used to provide basic insight into the factors controlling primary productivity at three different levels of complexity: 1. Studies of light intensity regulation in unicellular alga show how molecular biology can help understand the processing of environmental cues leading to the regulation of photosynthetic gene expression. 2. Probing of the photosynthetic apparatus using molecular techniques can be used to test existing mechanistic models derived from the interpretation of physiological and biophysical measurements. 3. Exploratory work on the expression of specific proteins during nutrient-limited growth of phytoplankton may lead to the identification and production of molecular probes for field studies.

  1. Molecular biology in studies of oceanic primary production

    Energy Technology Data Exchange (ETDEWEB)

    LaRoche, J.; Falkowski, P.G. (Brookhaven National Lab., Upton, NY (United States)); Geider, R. (Delaware Univ., Lewes, DE (United States). Coll. of Marine Studies)

    1992-01-01

    Remote sensing and the use of moored in situ instrumentation has greatly improved our ability to measure phytoplankton chlorophyll and photosynthesis on global scales with high temporal resolution. However, the interpretation of these measurements and their significance with respect to the biogeochemical cycling of carbon relies on their relationship with physiological and biochemical processes in phytoplankton. For example, the use of satellite images of surface chlorophyll to estimate primary production is often based on the functional relationship between photosynthesis and irradiance. A variety of environmental factors such as light, temperature, nutrient availability affect the photosynthesis/irradiance (P vs I) relationship in phytoplankton. We present three examples showing how molecular biology can be used to provide basic insight into the factors controlling primary productivity at three different levels of complexity: 1. Studies of light intensity regulation in unicellular alga show how molecular biology can help understand the processing of environmental cues leading to the regulation of photosynthetic gene expression. 2. Probing of the photosynthetic apparatus using molecular techniques can be used to test existing mechanistic models derived from the interpretation of physiological and biophysical measurements. 3. Exploratory work on the expression of specific proteins during nutrient-limited growth of phytoplankton may lead to the identification and production of molecular probes for field studies.

  2. Assessment of nitrogen and sulphur cycle bacteria and shrimp production in ponds treated with biological products

    Institute of Scientific and Technical Information of China (English)

    Thangapalam Jawahar Abraham; Shubhadeep Ghosh; Debasis Sasmal

    2015-01-01

    Objective:To study the influence of biological products on the levels of nitrogen and sulphur cycle bacteria in shrimp culture systems of West Bengal, India. Methods: The pond water and sediment samples were analyzed for physico-chemical parameters as per standard methods. The bacteria involved in ammonification, nitrification, denitrification, sulphate reduction and sulphur oxidation were enumerated by most probable number technique. Results:The semi-intensive and modified extensive shrimp farms used a variety of biological products during various stages of production. No biological products were used in traditional farms. The water and sediment samples of modified extensive system recorded significantly higher mean heterotrophic bacterial counts. The counts of ammonia, nitrite and sulphur oxidizers, and nitrate and sulphate reducers varied among the systems. The cycling of nitrogen and sulphur appeared to be affected with the intensification of culture practices. Conclusions:The application of biological products in certain systems helped to maintain the bacteria involved in nitrogen and sulphur cycles and safe levels of ammonia, nitrite and nitrate. An assessment of these metabolically active bacteria in shrimp culture ponds and the application of right kind microbial products would help ameliorate the organic pollution in shrimp aquaculture.

  3. The Swine Plasma Metabolome Chronicles "Many Days" Biological Timing and Functions Linked to Growth.

    Directory of Open Access Journals (Sweden)

    Timothy G Bromage

    Full Text Available The paradigm of chronobiology is based almost wholly upon the daily biological clock, or circadian rhythm, which has been the focus of intense molecular, cellular, pharmacological, and behavioral, research. However, the circadian rhythm does not explain biological timings related to fundamental aspects of life history such as rates of tissue/organ/body size development and control of the timing of life stages such as gestation length, age at maturity, and lifespan. This suggests that another biological timing mechanism is at work. Here we focus on a "many days" (multidien chronobiological period first observed as enigmatic recurring growth lines in developing mammalian tooth enamel that is strongly associate with all adult tissue, organ, and body masses as well as life history attributes such as gestation length, age at maturity, weaning, and lifespan, particularly among the well studied primates. Yet, knowledge of the biological factors regulating the patterning of mammalian life, such as the development of body size and life history structure, does not exist. To identify underlying molecular mechanisms we performed metabolome and genome analyses from blood plasma in domestic pigs. We show that blood plasma metabolites and small non-coding RNA (sncRNA drawn from 33 domestic pigs over a two-week period strongly oscillate on a 5-day multidien rhythm, as does the pig enamel rhythm. Metabolomics and genomics pathway analyses actually reveal two 5-day rhythms, one related to growth in which biological functions include cell proliferation, apoptosis, and transcription regulation/protein synthesis, and another 5-day rhythm related to degradative pathways that follows three days later. Our results provide experimental confirmation of a 5-day multidien rhythm in the domestic pig linking the periodic growth of enamel with oscillations of the metabolome and genome. This association reveals a new class of chronobiological rhythm and a snapshot of the

  4. The Swine Plasma Metabolome Chronicles "Many Days" Biological Timing and Functions Linked to Growth

    Science.gov (United States)

    Bromage, Timothy G.; Idaghdour, Youssef; Lacruz, Rodrigo S.; Crenshaw, Thomas D.; Ovsiy, Olexandra; Rotter, Björn; Hoffmeier, Klaus; Schrenk, Friedemann

    2016-01-01

    The paradigm of chronobiology is based almost wholly upon the daily biological clock, or circadian rhythm, which has been the focus of intense molecular, cellular, pharmacological, and behavioral, research. However, the circadian rhythm does not explain biological timings related to fundamental aspects of life history such as rates of tissue/organ/body size development and control of the timing of life stages such as gestation length, age at maturity, and lifespan. This suggests that another biological timing mechanism is at work. Here we focus on a "many days" (multidien) chronobiological period first observed as enigmatic recurring growth lines in developing mammalian tooth enamel that is strongly associate with all adult tissue, organ, and body masses as well as life history attributes such as gestation length, age at maturity, weaning, and lifespan, particularly among the well studied primates. Yet, knowledge of the biological factors regulating the patterning of mammalian life, such as the development of body size and life history structure, does not exist. To identify underlying molecular mechanisms we performed metabolome and genome analyses from blood plasma in domestic pigs. We show that blood plasma metabolites and small non-coding RNA (sncRNA) drawn from 33 domestic pigs over a two-week period strongly oscillate on a 5-day multidien rhythm, as does the pig enamel rhythm. Metabolomics and genomics pathway analyses actually reveal two 5-day rhythms, one related to growth in which biological functions include cell proliferation, apoptosis, and transcription regulation/protein synthesis, and another 5-day rhythm related to degradative pathways that follows three days later. Our results provide experimental confirmation of a 5-day multidien rhythm in the domestic pig linking the periodic growth of enamel with oscillations of the metabolome and genome. This association reveals a new class of chronobiological rhythm and a snapshot of the biological bases that

  5. The Swine Plasma Metabolome Chronicles "Many Days" Biological Timing and Functions Linked to Growth.

    Science.gov (United States)

    Bromage, Timothy G; Idaghdour, Youssef; Lacruz, Rodrigo S; Crenshaw, Thomas D; Ovsiy, Olexandra; Rotter, Björn; Hoffmeier, Klaus; Schrenk, Friedemann

    2016-01-01

    The paradigm of chronobiology is based almost wholly upon the daily biological clock, or circadian rhythm, which has been the focus of intense molecular, cellular, pharmacological, and behavioral, research. However, the circadian rhythm does not explain biological timings related to fundamental aspects of life history such as rates of tissue/organ/body size development and control of the timing of life stages such as gestation length, age at maturity, and lifespan. This suggests that another biological timing mechanism is at work. Here we focus on a "many days" (multidien) chronobiological period first observed as enigmatic recurring growth lines in developing mammalian tooth enamel that is strongly associate with all adult tissue, organ, and body masses as well as life history attributes such as gestation length, age at maturity, weaning, and lifespan, particularly among the well studied primates. Yet, knowledge of the biological factors regulating the patterning of mammalian life, such as the development of body size and life history structure, does not exist. To identify underlying molecular mechanisms we performed metabolome and genome analyses from blood plasma in domestic pigs. We show that blood plasma metabolites and small non-coding RNA (sncRNA) drawn from 33 domestic pigs over a two-week period strongly oscillate on a 5-day multidien rhythm, as does the pig enamel rhythm. Metabolomics and genomics pathway analyses actually reveal two 5-day rhythms, one related to growth in which biological functions include cell proliferation, apoptosis, and transcription regulation/protein synthesis, and another 5-day rhythm related to degradative pathways that follows three days later. Our results provide experimental confirmation of a 5-day multidien rhythm in the domestic pig linking the periodic growth of enamel with oscillations of the metabolome and genome. This association reveals a new class of chronobiological rhythm and a snapshot of the biological bases that

  6. Examining the Potential of Plasma-Assisted Pretreated Wheat Straw for Enzyme Production by Trichoderma reesei

    DEFF Research Database (Denmark)

    Rodríguez Gómez, Divanery; Lehmann, Linda Olkjær; Schultz-Jensen, Nadja

    2012-01-01

    Plasma-assisted pretreated wheat straw was investigated for cellulase and xylanase production by Trichoderma reesei fermentation. Fermentations were conducted with media containing washed and unwashed plasma-assisted pretreated wheat straw as carbon source which was sterilized by autoclavation...

  7. Platelet Rich Plasma and Hyaluronic Acid Blend for the Treatment of Osteoarthritis: Rheological and Biological Evaluation.

    Directory of Open Access Journals (Sweden)

    Fabrizio Russo

    Full Text Available Osteoarthritis (OA is the most common musculoskeletal disease. Current treatments for OA are mainly symptomatic and inadequate since none results in restoration of fully functional cartilage. Hyaluronic Acid (HA intra-articular injections are widely accepted for the treatment of pain associated to OA. The goal of HA viscosupplementation is to reduce pain and improve viscoelasticity of synovial fluid. Platelet-rich plasma (PRP has been also employed to treat OA to possibly induce cartilage regeneration. The combination of HA and PRP could supply many advantages for tissue repair. Indeed, it conjugates HA viscosupplementation with PRP regenerative properties. The aim of this study was to evaluate the rheological and biological properties of different HA compositions in combination with PRP in order to identify (i the viscoelastic features of the HA-PRP blends, (ii their biological effect on osteoarthritic chondrocytes and (iii HA formulations suitable for use in combination with PRP.HA/PRP blends have been obtained mixing human PRP and three different HA at different concentrations: 1 Sinovial, 0.8% (SN; 2 Sinovial Forte 1.6% (SF; 3 Sinovial HL 3.2% (HL; 4 Hyalubrix 1.5% (HX. Combinations of phosphate buffered saline (PBS and the four HA types were used as control. Rheological measurements were performed on an Anton PaarMCR-302 rheometer. Amplitude sweep, frequency sweep and rotational measurements were performed and viscoelastic properties were evaluated. The rheological data were validated performing the tests in presence of Bovine Serum Albumin (BSA up to ultra-physiological concentration (7%. Primary osteoarthritic chondrocytes were cultured in vitro with the HA and PRP blends in the culture medium for one week. Cell viability, proliferation and glycosaminoglycan (GAG content were assessed.PRP addition to HA leads to a decrease of viscoelastic shear moduli and increase of the crossover point, due to a pure dilution effect. For viscosupplements

  8. Extracellular membrane vesicles in blood products-biology and clinical relevance

    Directory of Open Access Journals (Sweden)

    Emilija Krstova Krajnc

    2016-01-01

    Full Text Available Extracellular membrane vesicles are fragments shed from plasma membranes off all cell types that are undergoing apoptosis or are being subjected to various types of stimulation or stress.  Even in the process of programmed cell death (apoptosis, cell fall apart of varying size vesicles. They expose phosphatidylserine (PS on the outer leaflet of their membrane, and bear surface membrane antigens reflecting their cellular origin. Extracellular membrane vesicles have been isolated from many types of biological fluids, including serum, cerebrospinal fluid, urine, saliva, tears and conditioned culture medium. Flow cytometry is one of the many different methodological approaches that have been used to analyze EMVs. The method attempts to characterize the EMVs cellular origin, size, population, number, and structure. EMVs are present and accumulate in blood products (erythrocytes, platelets as well as in fresh frozen plasma during storage. The aim of this review is to highlight the importance of extracellular vesicles as a cell-to-cell communication system and the role in the pathogenesis of different diseases. Special emphasis will be given to the implication of extracellular membrane vesicles in blood products and their clinical relevance. Although our understanding of the role of  EMVs in disease is far from comprehensive, they display promise as biomarkers for different diseases in the future and also as a marker of quality and safety in the quality control of blood products.

  9. Current studies on physiological functions and biological production of lactosucrose.

    Science.gov (United States)

    Mu, Wanmeng; Chen, Qiuming; Wang, Xiao; Zhang, Tao; Jiang, Bo

    2013-08-01

    Lactosucrose (O-β-D-galactopyranosyl-(1,4)-O-α-D-glucopyranosyl-(1,2)-β-D-fructofuranoside) is a trisaccharide formed from lactose and sucrose by enzymatic transglycosylation. This rare trisaccharide is a kind of indigestible carbohydrate, has good prebiotic effect, and promotes intestinal mineral absorption. It has been used as a functional ingredient in a range of food products which are approved as foods for specified health uses in Japan. Using lactose and sucrose as substrates, lactosucrose can be produced through transfructosylation by β-fructofuranosidase from Arthrobacter sp. K-1 or a range of levansucrases, or through transgalactosylation by β-galactosidase from Bacillus circulans. This article presented a review of recent studies on the physiological functions of lactosucrose and the biological production from lactose and sucrose by different enzymes.

  10. 37 CFR 1.779 - Calculation of patent term extension for a veterinary biological product.

    Science.gov (United States)

    2010-07-01

    ... extension for a veterinary biological product. 1.779 Section 1.779 Patents, Trademarks, and Copyrights... Calculation of patent term extension for a veterinary biological product. (a) If a determination is made pursuant to § 1.750 that a patent for a veterinary biological product is eligible for extension, the...

  11. 77 FR 30887 - Amendments to Sterility Test Requirements for Biological Products; Correction

    Science.gov (United States)

    2012-05-24

    ... Test Requirements for Biological Products; Correction AGENCY: Food and Drug Administration, HHS. ACTION... manufacturers of biological products greater flexibility, as appropriate, and encourages use of the most appropriate and state-of-the-art test methods for assuring the safety of biological products. The rule...

  12. 21 CFR 601.26 - Reclassification procedures to determine that licensed biological products are safe, effective...

    Science.gov (United States)

    2010-04-01

    ... licensed biological products are safe, effective, and not misbranded under prescribed, recommended, or... Reclassification procedures to determine that licensed biological products are safe, effective, and not misbranded... for the reclassification of all biological products that have been classified into Category IIIA....

  13. Enhanced Biological Behavior of In Vitro Human Gingival Fibroblasts on Cold Plasma-Treated Zirconia.

    Directory of Open Access Journals (Sweden)

    Miao Zheng

    Full Text Available To evaluate whether atmospheric-pressure dielectric-barrier-discharge plasma treatment of zirconia enhances its biocompatibility with human gingival fibroblasts.The zirconia disks were divided into four groups and treated using helium atmospheric-pressure dielectric-barrier-discharge plasmas for 30, 60 or 90 s or left untreated. The surface morphology, wettability and chemical elements were analyzed. Fibroblasts density, morphology, morphometry and attachment-related genes expression were measured at different time points from 3 to 72 h.After plasma treatment, the surface morphology and roughness remained the same, while the contact angle decreased from 78.31° to 43.71°, and the surface C/O ratio decreased from 3.17 to 0.89. The surficial areas and perimeters of HGFs were increased two-fold in the treated groups at 3 h. Fibroblasts density increased on treated disks at all time points, especially the ones treated for 60 s. Attachment-related genes in the groups treated for 30 and 60 s were significantly higher at 3 and 24 h.The helium atmospheric-pressure dielectric-barrier-discharge plasma treatment enhances the biological behavior of fibroblasts on zirconia by increasing the expression of attachment-related genes within 24 h and promoting the cell density during longer culture times. Wettability of zirconia, an important physicochemical property, has a vital influence on the cell behaviors.

  14. Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products.

    Science.gov (United States)

    Kavitha Sankar, P C; Ramakrishnan, Reshmi; Rosemary, M J

    2016-04-01

    Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product.

  15. Cryogenic pellet production developments for long-pulse plasma operation

    Energy Technology Data Exchange (ETDEWEB)

    Meitner, S. J.; Baylor, L. R.; Combs, S. K.; Fehling, D. T.; McGill, J. M.; Duckworth, R. C.; McGinnis, W. D.; Rasmussen, D. A. [Oak Ridge National Laboratory, 1Bethel Valley Rd Oak Ridge, TN 37831 (United States)

    2014-01-29

    Long pulse plasma operation on large magnetic fusion devices require multiple forms of cryogenically formed pellets for plasma fueling, on-demand edge localized mode (ELM) triggering, radiative cooling of the divertor, and impurity transport studies. The solid deuterium fueling and ELM triggering pellets can be formed by extrusions created by helium cooled, twin-screw extruder based injection system that freezes deuterium in the screw section. A solenoid actuated cutter mechanism is activated to cut the pellets from the extrusion, inserting them into the barrel, and then fired by the pneumatic valve pulse of high pressure gas. Fuel pellets are injected at a rate up to 10 Hz, and ELM triggering pellets are injected at rates up to 20 Hz. The radiative cooling and impurity transport study pellets are produced by introducing impurity gas into a helium cooled section of a pipe gun where it deposits in-situ. A pneumatic valve is opened and propellant gas is released downstream where it encounters a passive punch which initially accelerates the pellet before the gas flow around the finishes the pellet acceleration. This paper discusses the various cryogenic pellet production techniques based on the twin-screw extruder, pipe gun, and pellet punch designs.

  16. Hydrogen production by coal plasma gasification for fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    Galvita, V. [Max-Planck-Institute, Dynamics of Complex Technical Systems, Sandtorstrasse 1, 39106, Magdeburg (Germany); Messerle, V.E.; Ustimenko, A.B. [Research Department of Plasmotechnics, 22 Zvereva str., 050100 Almaty (Kazakhstan)

    2007-11-15

    Coal gasification in steam and air atmosphere under arc plasma conditions has been investigated with Podmoskovnyi brown coal, Kuuchekinski bituminous coal and Canadian petrocoke. It was found that for those coals the gasification degree to synthesis gas were 92.3%, 95.8 and 78.6% correspondingly. The amount of produced syngas was 30-40% higher in steam than in air gasification of the coal. The reduction of the carbon monoxide content in the hydrogen-rich reformate gas for low-temperature fuel cell applications normally involves high- and low-temperature water gas shift reactors followed by selective oxidation of residual carbon monoxide. It is shown that the carbon monoxide content can be reduced in one single reactor, which is based on an iron redox cycle. During the reduction phase of the cycle, the raw gas mixture of H{sub 2} and CO reduces a Fe{sub 3}O{sub 4}-CeO{sub 2}-ZrO{sub 2} sample, while during the oxidation phase steam re-oxidizes the iron and simultaneously hydrogen is being produced. The integration of the redox iron process with a coal plasma gasification technology in future allows the production of CO{sub x}-free hydrogen. (author)

  17. Biological productivity and carbon cycling in the Arctic Ocean

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Primary production, bacterial production, particulate organic carbon fluxes and organic carbon burial rates were quantified during the summer period of 1999 in the Arctic Ocean via 14C uptake, 3H uptake, 234Th/238U disequilibrium and 210Pbex dating, respectively. The integrated primary production in the water column was as high as 197 mmolC/(m2@d) in the Chukchi shelf and was 3.8 mmolC/(m2@d) in the Canada Basin. These rates are higher than those reported previously. The ratios of bacterial production to primary production in the study region were higher than 0.5, indicating that microbial activity is not depressed but important in cold Arctic waters. 234Th/238U disequilibria were evident at the station in the Canada Basin. The presence of significant 234Th deficiency suggested that scavenging and removal processes are also important to biogeochemical cycles of trace elements in the Arctic Ocean. Particulate organic carbon export flux was estimated to be 1.0 mmolC/(m2@d). Measurements of sediment excess 210Pb profile in the Chukchi shelf allowed us to estimate the amount of organic carbon buried in the bottom sediment, which ranged from 25 to 35 mmolC/(m2@d) and represented about 59%-82% of the mean primary production in the euphotic zone. Overall, our results indicated that the Arctic Ocean has active carbon cycling and is not a biological desert as previously believed. Therefore, the Arctic Ocean may play an important role in the global carbon cycle and climate change.

  18. Plasma quench production of titanium from titanium tetrachloride

    Energy Technology Data Exchange (ETDEWEB)

    Sears, J.W.

    1994-10-01

    This project, Plasma Quench Production of Titanium from Titanium Tetrachloride, centers on developing a technique for rapidly quenching the high temperature metal species and preventing back reactions with the halide. The quenching technique chosen uses the temperature drop produced in a converging/diverging supersonic nozzle. The rapid quench provided by this nozzle prevents the back reaction of the halide and metal. The nature of the process produces nanosized particles (10 to 100 nm). The powders are collected by cyclone separators, the hydrogen flared, and the acid scrubbed. Aluminum and titanium powders have been produced in the laboratory-scale device at 1 gram per hour. Efforts to date to scale up this process have not been successful.

  19. The Main Plasma Chemical Process of Nitric Oxide Production by Arc Discharge%The Main Plasma Chemical Process of Nitric Oxide Production by Arc Discharge

    Institute of Scientific and Technical Information of China (English)

    杨旗; 胡辉; 陈卫鹏; 许杰; 张锦丽; 吴双

    2011-01-01

    By adopting the optical multi-channel analyzer combined with fourier transform infrared (FTIR) spectrometer, the dominant free radicals and products generated by arc discharge were measured and studied, and the main plasma chemical reaction process in the nitric oxide production by arc discharge was identified. Plasma chemical kinetic curves of O, O2, N2, N and NO were simulated by using CHEMKIN and MATLAB. The results show that the main plasma chemical reaction process of nitric oxide production by arc discharge is a replacement reaction between O and N2, where NO can be generated instantaneously when discharging reaches stable.

  20. The rapid plasma reagin (circle) card test in biological false positive and leprosy sera

    Science.gov (United States)

    Garner, M. F.; Backhouse, J. L.

    1972-01-01

    The rapid plasma reagin (RPR) circle card and the Venereal Disease Reference Laboratory (VDRL) slide test results were compared on a group of sera known to show biological false positive (BFP) reactions to reagin detection tests for syphilis. The RPR test was more specific than the VDRL test on the sera selected, ie, it gave fewer false positive results than the VDRL test. However, in a group of presumed normal sera, the RPR test gave BFP reactions while the VDRL test gave none. The RPR test gave fewer BFP reactions than the VDRL test in 269 sera from patients with lepromatous leprosy. PMID:5086221

  1. Intermediate mass dilepton production during the chemical equilibration of quark gluon plasma

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The production of dileptons from the chemically equilibrating quark gluon plasma in the intermediate mass region has been studied. Comparing with the calculated results based on the thermodynamic equilibrium system of quark gluon plasma, it has been found that the quark phase of the chemically equilibrating system gives rise to an even larger enhancement of the dileptons production. Therefore, such an enhancement of dilepton production may signal the formation of quark gluon plasma.

  2. Production of field-reversed mirror plasma with a coaxial plasma gun

    Science.gov (United States)

    Hartman, C.W.; Shearer, J.W.

    The use of a coaxial plasma gun to produce a plasma ring which is directed into a magnetic field so as to form a field-reversed plasma confined in a magnetic mirror. Plasma thus produced may be used as a target for subsequent neutral beam injection or other similarly produced and projected plasma rings or for direct fusion energy release in a pulsed mode.

  3. Suitability of Gray Water for Hydroponic Crop Production Following Biological and Physical Chemical and Biological Subsystems

    Science.gov (United States)

    Bubenheim, David L.; Harper, Lynn D.; Wignarajah, Kanapathipillai; Greene, Catherine

    1994-01-01

    The water present in waste streams from a human habitat must be recycled in Controlled Ecological Life Support Systems (CELSS) to limit resupply needs and attain self-sufficiency. Plants play an important role in providing food, regenerating air, and producing purified water via transpiration. However, we have shown that the surfactants present in hygiene waste water have acute toxic effects on plant growth (Bubenheim et al. 1994; Greene et al., 1994). These phytotoxic affects can be mitigated by allowing the microbial population on the root surface to degrade the surfactant, however, a significant suppression (several days) in crop performance is experienced prior to reaching sub-toxic surfactant levels and plant recovery. An effective alternative is to stabilize the microbial population responsible for degradation of the surfactant on an aerobic bioreactor and process the waste water prior to utilization in the hydroponic solution (Wisniewski and Bubenheim, 1993). A sensitive bioassay indicates that the surfactant phytotoxicity is suppressed by more than 90% within 5 hours of introduction of the gray water to the bioreactor; processing for more than 12 hours degrades more than 99% of the phytotoxin. Vapor Compression Distillation (VCD) is a physical / chemical method for water purification which employees sequential distillation steps to separate water from solids and to volatilize contaminants. The solids from the waste water are concentrated in a brine and the pure product water (70 - 90% of the total waste water volume depending on operating conditions) retains non of the phytotoxic effects. Results of the bioassay were used to guide evaluations of the suitability of recovered gray water following biological and VCD processing for hydroponic lettuce production in controlled environments. Lettuce crops were grown for 28 days with 100% of the input water supplied with recovered water from the biological processor or VCD. When compared with the growth of plants

  4. Suitability of Gray Water for Hydroponic Crop Production Following Biological and Physical Chemical and Biological Subsystems

    Science.gov (United States)

    Bubenheim, David L.; Harper, Lynn D.; Wignarajah, Kanapathipillai; Greene, Catherine

    1994-01-01

    The water present in waste streams from a human habitat must be recycled in Controlled Ecological Life Support Systems (CELSS) to limit resupply needs and attain self-sufficiency. Plants play an important role in providing food, regenerating air, and producing purified water via transpiration. However, we have shown that the surfactants present in hygiene waste water have acute toxic effects on plant growth (Bubenheim et al. 1994; Greene et al., 1994). These phytotoxic affects can be mitigated by allowing the microbial population on the root surface to degrade the surfactant, however, a significant suppression (several days) in crop performance is experienced prior to reaching sub-toxic surfactant levels and plant recovery. An effective alternative is to stabilize the microbial population responsible for degradation of the surfactant on an aerobic bioreactor and process the waste water prior to utilization in the hydroponic solution (Wisniewski and Bubenheim, 1993). A sensitive bioassay indicates that the surfactant phytotoxicity is suppressed by more than 90% within 5 hours of introduction of the gray water to the bioreactor; processing for more than 12 hours degrades more than 99% of the phytotoxin. Vapor Compression Distillation (VCD) is a physical / chemical method for water purification which employees sequential distillation steps to separate water from solids and to volatilize contaminants. The solids from the waste water are concentrated in a brine and the pure product water (70 - 90% of the total waste water volume depending on operating conditions) retains non of the phytotoxic effects. Results of the bioassay were used to guide evaluations of the suitability of recovered gray water following biological and VCD processing for hydroponic lettuce production in controlled environments. Lettuce crops were grown for 28 days with 100% of the input water supplied with recovered water from the biological processor or VCD. When compared with the growth of plants

  5. Biological production of ethanol from coal. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-01

    Due to the abundant supply of coal in the United States, significant research efforts have occurred over the past 15 years concerning the conversion of coal to liquid fuels. Researchers at the University of Arkansas have concentrated on a biological approach to coal liquefaction, starting with coal-derived synthesis gas as the raw material. Synthesis gas, a mixture of CO, H{sub 2}, CO{sub 2}, CH{sub 4} and sulfur gases, is first produced using traditional gasification techniques. The CO, CO{sub 2} and H{sub 2} are then converted to ethanol using a bacterial culture of Clostridium 1jungdahlii. Ethanol is the desired product if the resultant product stream is to be used as a liquid fuel. However, under normal operating conditions, the ``wild strain`` produces acetate in favor of ethanol in conjunction with growth in a 20:1 molar ratio. Research was performed to determine the conditions necessary to maximize not only the ratio of ethanol to acetate, but also to maximize the concentration of ethanol resulting in the product stream.

  6. Plasma-Sprayed ZnO/TiO2 Coatings with Enhanced Biological Performance

    Science.gov (United States)

    Zhao, Xiaobing; Peng, Chao; You, Jing

    2017-08-01

    Surface chemical composition and topography are two key factors in the biological performance of implants. The aim of this work is to deposit ZnO/TiO2 composite coatings on the surface of titanium substrates by plasma spraying technique. The effects of the amount of ZnO doping on the microstructure, surface roughness, corrosion resistance, and biological performance of the TiO2 coatings were investigated. The results indicated that the phase composition of the as-sprayed TiO2 coating was mainly rutile. Addition of 10% ZnO into TiO2 coating led to a slight shift of the diffraction peaks to lower angle. Anatase phase and Zn2TiO4 were formed in 20%ZnO/TiO2 and 30%ZnO/TiO2 coatings, respectively. Doping with ZnO changed the topography of the TiO2 coatings, which may be beneficial to enhance their biological performance. All coatings exhibited microsized surface roughness, and the corrosion resistance of ZnO/TiO2 coatings was improved compared with pure TiO2 coating. The ZnO/TiO2 coatings could induce apatite formation on their surface and inhibit growth of Staphylococcus aureus, but these effects were dose dependent. The 20%ZnO/TiO2 coating showed better biological performance than the other coatings, suggesting potential application for bone implants.

  7. Biological risks associated with consumption of reptile products

    DEFF Research Database (Denmark)

    Magnino, S.; Colin, P.; Dei-Cas, E.

    2009-01-01

    recently increased in some areas of the world. Biological risks associated with the consumption of products from both farmed and wild reptile meat and eggs include infections caused by bacteria (Salmonella spp., Vibrio spp.). parasites (Spirometra, Trichinella, Gnathostoma, pentastomids), as well...... from other edible reptilians, though captive reptiles used as pets (lizards or turtles) are frequently carriers of these bacteria in Europe. Parasitic protozoa in reptiles represent a negligible risk for public health compared to parasitic metazoans, of which trichinellosis, pentastomiasis......, gnathostomiasis and sparganosis can be acquired through consumption of contaminated crocodile, monitor lizard, turtle and snake meat. respectively. Other reptiles. although found to harbour the above parasites. have not been implicated with their transmission to humans. Freezing treatment inactivates Spirometra...

  8. Production and biological activities of yellow pigments from Monascus fungi.

    Science.gov (United States)

    Chen, Gong; Wu, Zhenqiang

    2016-08-01

    Monascus yellow pigments (MYPs), are azaphilone compounds and one of the three main components of total Monascus pigments (MPs). Thirty-five hydrophilic or hydrophobic MYPs have been identified, with the majority being hydrophobic. Apart from screening special Monascus strains, some advanced approaches, such as extractive and high-cell-density fermentations, have been applied for developing or producing new MYPs, especially extracellular hydrophilic MYPs. The outstanding performance of MYPs in terms of resistance to photodegradation, as well as tolerance for temperature and pH, give natural MYPs reasonable prospects, compared with the orange and red MPs, for practical use in the present and future. Meanwhile, MYPs have shown promising potential for applications in the food and pharmaceutical industries based on their described bioactivities. This review briefly summarizes the reports to date on chemical structures, biological activities, biosynthetic pathways, production technologies, and physicochemical performances of MYPs. The existing problems for MYPs are discussed and research prospects proposed.

  9. 77 FR 47397 - Request for Nominations of Specific Drug/Biologic Product(s) That Could Be Brought Before the...

    Science.gov (United States)

    2012-08-08

    ... HUMAN SERVICES Food and Drug Administration Request for Nominations of Specific Drug/Biologic Product(s... invites the public to suggest one or more specific drug or biologic products that could be brought before... Drugs Advisory Committee AGENCY: Food and Drug Administration, HHS. ACTION: Notice; request for...

  10. 78 FR 67985 - Supplemental Applications Proposing Labeling Changes for Approved Drugs and Biological Products

    Science.gov (United States)

    2013-11-13

    ... RLD throughout the lifecycle of the generic drug product (see Sec. 314.150(b)(10) (21 CFR 314.150(b... Applications Proposing Labeling Changes for Approved Drugs and Biological Products AGENCY: Food and Drug... drug or biological product to change the product labeling to reflect certain types of newly acquired...

  11. 9 CFR 112.9 - Biological products imported for research and evaluation.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Biological products imported for research and evaluation. 112.9 Section 112.9 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... PACKAGING AND LABELING § 112.9 Biological products imported for research and evaluation. A...

  12. Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products

    Energy Technology Data Exchange (ETDEWEB)

    Kavitha Sankar, P.C.; Ramakrishnan, Reshmi; Rosemary, M.J., E-mail: rosemarymj@lifecarehll.com

    2016-04-01

    Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. - Highlights: • Different amounts of silver nanoparticles (0.2 g–0.4 g/napkin) were added to cellulose pulp. • The silver nanoparticle incorporated cellulose pulp was proved to be antibacterial by JIS L 1902 method. • The minimum concentration of silver required for antibacterial activity with no cytotoxicity has been found out. • In-vivo vaginal irritation and intracutaneous reactivity studies confirmed the biocompatibility of the material.

  13. Giant Icebergs and Biological Productivity on Early Mars

    Science.gov (United States)

    Uceda, E.; Fairen, A. G.; Woodworth-Lynas, C.

    2016-12-01

    We have previously presented evidence for furrows, dump structures and chains of craters that we interpret as indication for giant iceberg transport and grounding on very cold oceans on early Mars, both in the northern plains and in the Hellas basin. Structures include: 1. Furrows: The furrows are located in elevated areas or on local topographic highs, particularly on the Hellas basin. We interpret these features in terms of iceberg rafting and grounding. 2. Chains of craters: High-resolution images of Utopia and Isidis Basins reveal chains of crater-like structures several hundred meters wide and 1 to 5 km long. 3. Dump structures: Dark boulder clusters are revealed at large scales by their slightly darker tonality with respect to the surrounding terrain. These clusters have sizes ranging from several hundred meters to 1-2 km. On Earth's oceans, giant icebergs release melting water containing nanoparticulate iron and other micronutrients, which support biological metabolism and growth to the near-coastal euphotic ecosystems, many of which are iron limited. This iron limitation of primary producers has been documented in large regions of the Earth's oceans, most notably in polar areas proximal to significant glacial activity, and is counterbalanced by the substantial enrichment of terrigenous material supplied by icebergs. The biological productivity extends hundreds of kilometres from the giant icebergs, and persists for over one month after the iceberg passes. Here we propose that giant iceberg activity on early Mars could have promoted a similar enhancing of biological productivity on the planet's oceans. The identification of specific biosignatures in icebergs trails on Earth could give clues as to what kind of biosignatures could be expected on the ancient Mars ocean floors, and where to look for them. In particular, assuming that life existed on Mars coeval to glacial activity, enhanced concentrations of organic carbon could be anticipated near giant iceberg

  14. Production of stable isotopes utilizing the plasma separation process

    Science.gov (United States)

    Bigelow, T. S.; Tarallo, F. J.; Stevenson, N. R.

    2005-12-01

    A plasma separation process (PSP) is being operated at Theragenics Corporation's®, Oak Ridge, TN, facility for the enrichment of stable isotopes. The PSP utilizes ion cyclotron mass discrimination to separate isotopes on a relatively large scale. With a few exceptions, nearly any metallic element could be processed with PSP. Output isotope enrichment factor depends on natural abundance and mass separation and can be fairly high in some cases. The Theragenics™ PSP facility is believed to be the only such process currently in operation. This system was developed and formerly operated under the US Department of Energy Advanced Isotope Separation program. Theragenics™ also has a laboratory at the PSP site capable of harvesting the isotopes from the process and a mass spectrometer system for analyzing enrichment and product purity. Since becoming operational in 2002, Theragenics™ has utilized the PSP to separate isotopes of several elements including: dysprosium, erbium, gadolinium, molybdenum and nickel. Currently, Theragenics™ is using the PSP for the separation of 102Pd, which is used as precursor for the production of 103Pd. The 103Pd radioisotope is the active ingredient in TheraSeed®, which is used in the treatment of early stage prostate cancer and being investigated for other medical applications. New industrial, medical and research applications are being investigated for isotopes that can be enriched on the PSP. Pre-enrichment of accelerator or reactor targets offers improved radioisotope production. Theragenics operates 14 cyclotrons for proton activation and has access to HFIR at ORNL for neutron activation of radioisotopes.

  15. Biological clocks in the duodenum and the diurnal regulation of duodenal and plasma serotonin.

    Directory of Open Access Journals (Sweden)

    Elizabeth Ebert-Zavos

    Full Text Available Serotonin in blood plasma is primarily synthesized in the duodenum, as brain derived serotonin does not cross the blood-brain barrier. Because serotonin in the brain and retina is synthesized under the control of a circadian clock, we sought to determine if a circadian clock in the duodenum regulates serotonin synthesis and release in blood. We examined gene expression in the duodenum of chickens at different times of the day and found that the duodenum rhythmically expresses molecular circadian clock genes and genes controlling serotonin biosynthesis, specifically tryptophan hydroxylase, in a light dark cycle (LD. Analysis of the duodenum and blood plasma showed that the amount of serotonin in the duodenum varies across the day and that serotonin profiles in blood plasma are also rhythmic in LD, but were not rhythmic in constant darkness. Because serotonin in the gut affects duodenal nutrient absorption and gut motility, the control of serotonin production in the duodenum by LD cycles could provide an additional mechanism by which the external environment controls nutrient uptake and digestive function. The diurnal regulation of plasma serotonin may also serve as an additional biochemical signal in the blood encoding time and could be used by target tissues to indicate the status of nutrient absorption.

  16. 77 FR 3780 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-01-25

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological..., Parasitic and Allergenic Products, Office of Vaccines Research and Review, Center for Biologics Evaluation...

  17. 76 FR 13646 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-03-14

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological... Products, Office of Vaccines Research and Review, Center for Biologics Evaluation and Research, FDA. In the...

  18. 76 FR 52668 - Vaccines and Related Biological Products Advisory Committee; Amendment of Notice

    Science.gov (United States)

    2011-08-23

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... Administration (FDA) is announcing an amendment to the notice of meeting of the Vaccines and Related Biological... announced that a meeting of the Vaccines and Related Biological Products Advisory Committee would be held on...

  19. 78 FR 20663 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-04-05

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological... DNA Viruses, Division of Viral Products, Office of Vaccines Research and Review, Center for Biologics...

  20. 9 CFR 118.3 - Movement of detained biological products; Termination of detention.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Movement of detained biological... VECTORS DETENTION; SEIZURE AND CONDEMNATION § 118.3 Movement of detained biological products; Termination of detention. Except as provided in paragraphs (a) and (b) of this section, no biological...

  1. Competency development in antibody production in cancer cell biology

    Energy Technology Data Exchange (ETDEWEB)

    Park, M.S.

    1998-12-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The main objective of this project was to develop a rapid recombinant antibody production technology. To achieve the objective, the authors employed (1) production of recombinant antigens that are important for cell cycle regulation and DNA repair, (2) immunization and specific selection of antibody-producing lymphocytes using the flow cytometry and magnetic bead capturing procedure, (3) construction of single chain antibody library, (4) development of recombinant vectors that target, express, and regulate the expression of intracellular antibodies, and (5) specific inhibition of tumor cell growth in tissue culture. The authors have accomplished (1) optimization of a selection procedure to isolate antigen-specific lymphocytes, (2) optimization of the construction of a single-chain antibody library, and (3) development of a new antibody expression vector for intracellular immunization. The future direction of this research is to continue to test the potential use of the intracellular immunization procedure as a tool to study functions of biological molecules and as an immuno-cancer therapy procedure to inhibit the growth of cancer cells.

  2. Biological removal of cationic fission products from nuclear wastewater.

    Science.gov (United States)

    Ngwenya, N; Chirwa, E M N

    2011-01-01

    Nuclear energy is becoming a preferred energy source amidst rising concerns over the impacts of fossil fuel based energy on global warming and climate change. However, the radioactive waste generated during nuclear power generation contains harmful long-lived fission products such as strontium (Sr). In this study, cationic strontium uptake from solution by microbial cultures obtained from mine wastewater is evaluated. A high strontium removal capacity (q(max)) with maximum loading of 444 mg/g biomass was achieved by a mixed sulphate reducing bacteria (SRB) culture. Sr removal in SRB was facilitated by cell surface based electrostatic interactions with the formation of weak ionic bonds, as 68% of the adsorbed Sr(2+) was easily desorbed from the biomass in an ion exchange reaction with MgCl₂. To a lesser extent, precipitation reactions were also found to account for the removal of Sr from aqueous solution as about 3% of the sorbed Sr was precipitated due to the presence of chemical ligands while the remainder occurred as an immobile fraction. Further analysis of the Sr-loaded SRB biomass by scanning electron microscopy (SEM) coupled to energy dispersive X-ray (EDX) confirmed extracellular Sr(2+) precipitation as a result of chemical interaction. In summary, the obtained results demonstrate the prospects of using biological technologies for the remediation of industrial wastewaters contaminated by fission products.

  3. Biological hydrogen production measured in batch anaerobic respirometers.

    Science.gov (United States)

    Logan, Bruce E; Oh, Sang-Eun; Kim, In S; Van Ginkel, Steven

    2002-06-01

    The biological production of hydrogen from the fermentation of different substrates was examined in batch tests using heat-shocked mixed cultures with two techniques: an intermittent pressure release method (Owen method) and a continuous gas release method using a bubble measurement device (respirometric method). Under otherwise identical conditions, the respirometric method resulted in the production of 43% more hydrogen gas from glucose than the Owen method. The lower conversion of glucose to hydrogen using the Owen protocol may have been produced by repression of hydrogenase activity from high partial pressures in the gastight bottles, but this could not be proven using a thermodynamic/rate inhibition analysis. In the respirometric method, total pressure in the headspace never exceeded ambient pressure, and hydrogen typically composed as much as 62% of the headspace gas. High conversion efficiencies were consistently obtained with heat-shocked soils taken at different times and those stored for up to a month. Hydrogen gas composition was consistently in the range of 60-64% for glucose-grown cultures during logarithmic growth but declined in stationary cultures. Overall, hydrogen conversion efficiencies for glucose cultures were 23% based on the assumption of a maximum of 4 mol of hydrogen/ mol of glucose. Hydrogen conversion efficiencies were similar for sucrose (23%) and somewhat lower for molasses (15%) but were much lower for lactate (0.50%) and cellulose (0.075%).

  4. Presence and biological activity of antibiotics used in fuel ethanol and corn co-product production.

    Science.gov (United States)

    Compart, D M Paulus; Carlson, A M; Crawford, G I; Fink, R C; Diez-Gonzalez, F; Dicostanzo, A; Shurson, G C

    2013-05-01

    Antibiotics are used in ethanol production to control bacteria from competing with yeast for nutrients during starch fermentation. However, there is no published scientific information on whether antibiotic residues are present in distillers grains (DG), co-products from ethanol production, or whether they retain their biological activity. Therefore, the objectives of this study were to quantify concentrations of various antibiotic residues in DG and determine whether residues were biologically active. Twenty distillers wet grains and 20 distillers dried grains samples were collected quarterly from 9 states and 43 ethanol plants in the United States. Samples were analyzed for DM, CP, NDF, crude fat, S, P, and pH to describe the nutritional characteristics of the samples evaluated. Samples were also analyzed for the presence of erythromycin, penicillin G, tetracycline, tylosin, and virginiamycin M1, using liquid chromatography and mass spectrometry. Additionally, virginiamycin residues were determined, using a U.S. Food and Drug Administration-approved bioassay method. Samples were extracted and further analyzed for biological activity by exposing the sample extracts to 10(4) to 10(7) CFU/mL concentrations of sentinel bacterial strains Escherichia coli ATCC 8739 and Listeria monocytogenes ATCC 19115. Extracts that inhibited bacterial growth were considered to have biological activity. Physiochemical characteristics varied among samples but were consistent with previous findings. Thirteen percent of all samples contained low (≤1.12 mg/kg) antibiotic concentrations. Only 1 sample extract inhibited growth of Escherichia coli at 10(4) CFU/mL, but this sample contained no detectable concentrations of antibiotic residues. No extracts inhibited Listeria monocytogenes growth. These data indicate that the likelihood of detectable concentrations of antibiotic residues in DG is low; and if detected, they are found in very low concentrations. The inhibition in only 1 DG

  5. Biological and Agricultural Studies on Application of Discharge Plasma and Electromagnetic Fields 2.Sterilization by Electrical Discharges and Plasmas

    Science.gov (United States)

    Watanabe, Takayuki

    The use of electrical discharges and plasmas for sterilization is reviewed. Plasmas generated by a silent discharge, a pulse discharge, and a radio frequency discharge under atmospheric pressure have been used for sterilization. Furthermore, a microwave plasma, a radio frequency plasma, and a low temperature plasma with hydrogen peroxide under low pressure conditions have been also used for sterilization. Sterilization results from injury caused by the discharge current, and from the reaction of species affected by the discharge. A silent discharge with air or oxygen is most effective for the sterilization. Nitrogen discharge also has a significant effect, however, argon discharge does not have a significant effect.

  6. Production of selective membranes using plasma deposited nanochanneled thin films

    Directory of Open Access Journals (Sweden)

    Rodrigo Amorim Motta Carvalho

    2006-12-01

    Full Text Available The hydrolization of thin films obtained by tetraethoxysilane plasma polymerization results in the formation of a nanochanneled silicone like structure that could be useful for the production of selective membranes. Therefore, the aim of this work is to test the permeation properties of hydrolyzed thin films. The films were tested for: 1 permeation of polar organic compounds and/or water in gaseous phase and 2 permeation of salt in liquid phase. The efficiency of permeation was tested using a quartz crystal microbalance (QCM technique in gas phase and conductimetric analysis (CA in liquid phase. The substrates used were: silicon for characterization of the deposited films, piezoelectric quartz crystals for tests of selective membranes and cellophane paper for tests of permeation. QCM analysis showed that the nanochannels allow the adsorption and/or permeation of polar organic compounds, such as acetone and 2-propanol, and water. CA showed that the films allow salt permeation after an inhibition time needed for hydrolysis of the organic radicals within the film. Due to their characteristics, the films can be used for grains protection against microorganism proliferation during storage without preventing germination.

  7. The importance of selecting a proper biological milieu for protein corona analysis in vitro: Human plasma versus human serum.

    Science.gov (United States)

    Mirshafiee, Vahid; Kim, Raehyun; Mahmoudi, Morteza; Kraft, Mary L

    2016-06-01

    Nanoparticle (NP) exposure to biological fluids in the body results in protein binding to the NP surface, which forms a protein coating that is called the "protein corona". To simplify studies of protein-NP interactions and protein corona formation, NPs are incubated with biological solutions, such as human serum or human plasma, and the effects of this exposure are characterized in vitro. Yet, how NP exposure to these two different biological milieus affects protein corona composition and cell response has not been investigated. Here, we explore the differences between the protein coronas that form when NPs are incubated in human serum versus human plasma. NP characterization indicated that NPs that were exposed to human plasma had higher amounts of proteins bound to their surfaces, and were slightly larger in size than those exposed to human serum. In addition, significant differences in corona composition were also detected with gel electrophoresis and liquid chromatography-mass spectrometry/mass spectrometry, where a higher fraction of coagulation proteins and complement factors were found on the plasma-exposed NPs. Flow cytometry and confocal microscopy showed that the uptake of plasma-exposed NPs was higher than that of serum-exposed NPs by RAW 264.7 macrophage immune cells, but not by NIH 3T3 fibroblast cells. This difference is likely due to the elevated amounts of opsonins, such as fibrinogen, on the surfaces of the NPs exposed to plasma, but not serum, because these components trigger NP internalization by immune cells. As the human plasma better mimics the composition of the in vivo environment, namely blood, in vitro protein corona studies should employ human plasma, and not human serum, so the biological phenomena that is observed is more similar to that occurring in vivo.

  8. The biological response of cells to nanosecond pulsed electric fields is dependent on plasma membrane cholesterol.

    Science.gov (United States)

    Cantu, Jody C; Tarango, Melissa; Beier, Hope T; Ibey, Bennett L

    2016-11-01

    Previous work from our laboratory demonstrated nanopore formation in cell membranes following exposure to nanosecond pulsed electric fields (nsPEF). We observed differences in sensitivity to nsPEF in both acute membrane injury and 24h lethality across multiple cells lines. Based on these data, we hypothesize that the biological response of cells to nsPEF is dependent on the physical properties of the plasma membrane (PM), including regional cholesterol content. Results presented in this paper show that depletion of membrane cholesterol disrupts the PM and increases the permeability of cells to small molecules, including propidium iodide and calcium occurring after fewer nsPEF. Additionally, cholesterol depletion concurrently decreases the "dose" of nsPEF required to induce lethality. In summary, the results of the current study suggest that the PM cholesterol composition is an important determinant in the cellular response to nsPEF. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Plasma adiponectin and endogenous glucose production in humans

    DEFF Research Database (Denmark)

    Stefan, Norbert; Stumvoll, Michael; Vozarova, Barbora

    2003-01-01

    High plasma adiponectin is associated with reduced risk of type 2 diabetes, probably a consequence of its insulin-sensitizing properties. In vivo data in rodents suggest that the insulin-sensitization responsible for improvement of glycemia occurs in muscle and liver. Whereas associations of plasma...... adiponectin with muscle insulin sensitivity in humans have been examined, this has not been done for the liver....

  10. Spectrochemical analysis of powdered biological samples using transversely excited atmospheric carbon dioxide laser plasma excitation

    Science.gov (United States)

    Zivkovic, Sanja; Momcilovic, Milos; Staicu, Angela; Mutic, Jelena; Trtica, Milan; Savovic, Jelena

    2017-02-01

    The aim of this study was to develop a simple laser induced breakdown spectroscopy (LIBS) method for quantitative elemental analysis of powdered biological materials based on laboratory prepared calibration samples. The analysis was done using ungated single pulse LIBS in ambient air at atmospheric pressure. Transversely-Excited Atmospheric pressure (TEA) CO2 laser was used as an energy source for plasma generation on samples. The material used for the analysis was a blue-green alga Spirulina, widely used in food and pharmaceutical industries and also in a few biotechnological applications. To demonstrate the analytical potential of this particular LIBS system the obtained spectra were compared to the spectra obtained using a commercial LIBS system based on pulsed Nd:YAG laser. A single sample of known concentration was used to estimate detection limits for Ba, Ca, Fe, Mg, Mn, Si and Sr and compare detection power of these two LIBS systems. TEA CO2 laser based LIBS was also applied for quantitative analysis of the elements in powder Spirulina samples. Analytical curves for Ba, Fe, Mg, Mn and Sr were constructed using laboratory produced matrix-matched calibration samples. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used as the reference technique for elemental quantification, and reasonably well agreement between ICP and LIBS data was obtained. Results confirm that, in respect to its sensitivity and precision, TEA CO2 laser based LIBS can be successfully applied for quantitative analysis of macro and micro-elements in algal samples. The fact that nearly all classes of materials can be prepared as powders implies that the proposed method could be easily extended to a quantitative analysis of different kinds of materials, organic, biological or inorganic.

  11. Decontamination of Chemical/Biological Warfare (CBW) Agents Using an Atmospheric Pressure Plasma Jet (APPJ)

    Science.gov (United States)

    Herrmann, Hans W.

    1998-11-01

    The atmospheric pressure plasma jet (APPJ) is a non-thermal, high pressure, uniform glow discharge that produces a high velocity effluent stream of highly reactive chemical species. The discharge operates on a feedstock gas (e.g. He/O_2/H_2O) which flows between an outer, grounded, cylindrical electrode and an inner, coaxial electrode powered at 13.56 MHz RF. While passing through the plasma, the feedgas becomes excited, dissociated or ionized by electron impact. Once the gas exits the discharge volume, ions and electrons are rapidly lost by recombination, but the fast-flowing effluent still contains metastables (e.g. O2*, He*) and radicals (e.g. O, OH). These reactive species have been shown to be effective neutralizers of surrogates for anthrax spores, mustard blister agent and VX nerve gas. Unlike conventional, wet decontamination methods, the plasma effluent does not cause corrosion of most surfaces and does not damage wiring, electronics, nor most plastics. This makes it highly suitable for decontamination of high value sensitive equipment such as is found in vehicle interiors (i.e. tanks, planes...) for which there is currently no good decontamination technique. Furthermore, the reactive species rapidly degrade into harmless products leaving no lingering residue or harmful byproducts. Physics of the APPJ will be discussed and results of surface decontamination experiments using simulant and actual CBW agents will be presented.

  12. Biological hydrogen production by dark fermentation: challenges and prospects towards scaled-up production.

    Science.gov (United States)

    RenNanqi; GuoWanqian; LiuBingfeng; CaoGuangli; DingJie

    2011-06-01

    Among different technologies of hydrogen production, bio-hydrogen production exhibits perhaps the greatest potential to replace fossil fuels. Based on recent research on dark fermentative hydrogen production, this article reviews the following aspects towards scaled-up application of this technology: bioreactor development and parameter optimization, process modeling and simulation, exploitation of cheaper raw materials and combining dark-fermentation with photo-fermentation. Bioreactors are necessary for dark-fermentation hydrogen production, so the design of reactor type and optimization of parameters are essential. Process modeling and simulation can help engineers design and optimize large-scale systems and operations. Use of cheaper raw materials will surely accelerate the pace of scaled-up production of biological hydrogen. And finally, combining dark-fermentation with photo-fermentation holds considerable promise, and has successfully achieved maximum overall hydrogen yield from a single substrate. Future development of bio-hydrogen production will also be discussed. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Modeling of plasma jet production from rail and coaxial guns for imploding plasma liner formation*

    Science.gov (United States)

    Mason, R. J.; Faehl, R. J.; Kirikpatrick, R. C.; Witherspoon, D.; Cassibry, J.

    2010-11-01

    We study the generation of plasma jets for forming imploding plasma liners using an enhanced version of the ePLAS implicit/hybrid model.^1 Typically, the jets are partially ionized D or Ar gases, in initial 3-10 cm long slugs at 10^16-10^18 electron/cm^3, accelerated for microseconds along 15-30 cm rail or coaxial guns with a 1 cm inter-electrode gap and driven by magnetic fields of a few Tesla. We re-examine the B-field penetration mechanisms that can be active in such wall-connected plasmas,^2 including erosion and EMHD influences, which can subsequently impact plasma liner formation and implosion. For the background and emitted plasma components we discuss optimized PIC and fluid modeling techniques, and the use of implicit fields and hybridized electrons to speed simulation. The plasmas are relatively cold (˜3 eV), so results with fixed atomic Z are compared to those from a simple analytic EOS, and allowing radiative heat loss from the plasma. The use of PIC ions is explored to extract large mean-free-path kinetic effects. 1. R. J. Mason and C. Cranfill, IEEE Trans. Plasma Sci. PS-14, 45 (1986) 2. R. Mason, et al., Phys. Fluids B, 5, 1115 (1993). [4pt] *Research supported in part by USDOE Grant DE-SC0004207.

  14. Damages of Biological Components in Bacteria and Bacteriophages Exposed to Atmospheric Non-thermal Plasma

    Science.gov (United States)

    Mizuno, Akira; Yasuda, Hachiro

    Mechanism of inactivation of bio-particles exposed to dielectric barrier discharge, DBD, has been studied using E. coli and bacteriophages. States of different biological components were monitored during the course of inactivation. Analysis of green fluorescent protein, GFP, introduced into E.coli cells proved that Non-thermal Plasma, NTP causes a prominent protein damages without cutting peptide bonds. We have developed a biological assay which evaluates in vitro DNA damage of the bacteriophages. Bacteriophage λ having double stranded DNA was exposed to DBD, then DNA was purified and subjected to in vitro DNA packaging reactions. The re-packaged phages consist of the DNA from discharged phages and brand-new coat proteins. Survival curves of the re-packaged phages showed extremely large D value (D = 25 s) compared to the previous D value (D = 3 s) from the discharged phages. The results indicate that DNA damage hardly contributed to the inactivation, and the damage in coat proteins is responsible for inactivation of the phages. M13 phages having single stranded DNA were also examined with the same manner. In this case, damage to DNA was as severe as that of the coat proteins.

  15. Optical and biological properties of transparent nanocrystalline hydroxyapatite obtained through spark plasma sintering.

    Science.gov (United States)

    Li, Zhong; Thompson, Brianna C; Dong, Zhili; Khor, Khiam Aik

    2016-12-01

    Transparent bioceramics have attracted a large amount of research interest as they facilitate direct observation of biointerfacial reactions. Thus far, attempts to achieve transparent hydroxyapatite have been focused on augmenting the sintering pressure and/or extending the sintering duration. This study aims at fabricating transparent HA using a direct and fast spark plasma sintering process with appropriate starting powder and moderate sintering pressure. Three types of raw powder, namely micro-spheres, nano-rods and nano-spheres, were sintered to investigate the optical and biological properties of the compacted pellets. It was found that in terms of transparency, the micro-sphere pellet sintered at 1000°C stood out with an in-line transmittance as high as 84% achieved at 1300nm for a 2mm thick sample. In addition, pellets fabricated from micro-spheres demonstrated the highest cell viability in in vitro biological tests with L929 cells. Living cells cultured on a transparent micro-sphere pellet could be directly and clearly observed by light microscopy. It is thus concluded that the micro-sphere powder is the most desirable raw material to manufacture transparent hydroxyapatite because it could enable dense pellets with notably high transparency and outstanding in vitro biocompatibility to be readily obtained.

  16. Hydrogen production by plasma electrolysis reactor of KOH-ethanol solution

    Science.gov (United States)

    Saksono, N.; Batubara, T.; Bismo, S.

    2016-11-01

    Plasma electrolysis has great potential in industrial hydrogen production, chlor-alkali production, and waste water treatment. Plasma electrolysis produces more hydrogen with less energy consumption than hydrocarbon or Faraday electrolysis. This paper investigated the hydrogen production by plasma electrolysis of KOH-ethanol solution at 80 °C and 1 atm. The effects of voltage, KOH solution, ethanol addition, and cathode deep on plasma electrolysis performance were studied. The hydrogen production was analyzed using bubble flow meter and hydrogen analyzer. The electrical energy consumption was measured by a digital multimeter. The effectiveness of plasma electrolysis in terms of hydrogen production was evaluated by comparing it with Faraday Electrolysis. The results showed that hydrogen produced by plasma electrolysis is 149 times higher than the hydrogen produced by Faraday electrolysis. The optimum hydrogen production was 50.71 mmol/min, obtained at 700 V with 0.03 M KOH, 10% vol ethanol and 6.6 cm cathode deep, with energy consumption 1.49 kJ/mmol. The result demonstrates a promising path for hydrogen production by utilizing plasma electrolysis reactor.

  17. Plasma proteins production and excretion in diabetic nephropathy in ...

    African Journals Online (AJOL)

    Journal of African Association of Physiological Sciences ... Subjects, materials, and methods: Plasma albumin, and fibrinogen ... Results: A direct relationship was found between albuminuria and albumin concentration (r=0.59, p<0.05).

  18. Plasma reforming of glycerol for synthesis gas production.

    Science.gov (United States)

    Zhu, Xinli; Hoang, Trung; Lobban, Lance L; Mallinson, Richard G

    2009-05-28

    Glycerol can be effectively converted to synthesis gas (selectivity higher than 80%) with small amounts of water or no water using plasmas at low temperature and atmospheric pressure, without external heating.

  19. Simultaneous determination of polar pharmaceuticals and personal care products in biological organs and tissues.

    Science.gov (United States)

    Tanoue, Rumi; Nomiyama, Kei; Nakamura, Haruna; Hayashi, Terutake; Kim, Joon-Woo; Isobe, Tomohiko; Shinohara, Ryota; Tanabe, Shinsuke

    2014-08-15

    In the present study, a sensitive and accurate isotope dilution method was developed for the simultaneous determination of 17 polar pharmaceutical and personal care product (PPCP) residues (logKow=1.40-5.74), including 14 pharmaceuticals and 3 personal care products, in biological organs and tissues. The proposed method involved enzymatic hydrolysis, followed by sequential clean-up using silica gel chromatography and gel permeation chromatography, and analysis via ultra-high-performance liquid chromatography with tandem mass spectrometry. This method yielded acceptable absolute recoveries (48-88%) and internal standard-corrected recoveries (90-130%) for 17 PPCPs. Method detection limits were between 0.0092 and 3.2ngg(-1) wet weight, and the limits of quantification were between 0.020 and 8.7ngg(-1) wet weight. The method can be used to readily detect the target compounds at trace levels while minimizing the required sample volume. The developed method was applied to the determination of 17 PPCPs in the liver and kidney of 17 birds collected from Japan and also in the plasma, liver, and brain of 7 cyprinoid fish from an effluent-dominated stream in Japan. Triclosan was detected in 5 of 11 fish-eating birds but not in non-fish-eating birds, suggesting the contamination of prey fish by the chemical. Non-steroidal anti-inflammatory drugs, antibacterial agents, and psychotropic agents were frequently detected in the fish tissues. In addition, 7 of the target compounds were found in fish brain. The median brain/plasma ratios of the psychotropic agents ranged from 1.6 (carbamazepine) to 12 (diphenhydramine), indicating high transportability to fish brain. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Tetraquarks Production in Quark-Gluon Plasma with Diquarks

    Institute of Scientific and Technical Information of China (English)

    MA Zhong-Biao; GAO Chong-Shou

    2006-01-01

    @@ We present a way to calculate tetraquarks ratios for quark-gluon plasma with diquarks. The ratios of tetraquarks over baryons produced from quark matter are high than hadronic gas model limits. It is a better way to search for four-quark states in relativistic heavy ion collisions. It may become a criterion to judge whether quark-gluon plasma has formed to search for four-quark states in relativistic heavy ion collisions.

  1. Strangeness Production in a Chemically Equilibrating Quark-Gluon Plasma

    Institute of Scientific and Technical Information of China (English)

    HE Ze-Jun; LONG Jia-Li; MA Yu-Gang; MA Guo-Liang

    2004-01-01

    @@ We study the strangeness of a chemically equilibrating quark-gluon plasma at finite baryon density based on the and will accelerate with the change of the initial system from a chemically non-equilibrated to an equilibrated system. We also find that the calculated strangeness is very different from the one in the thermodynamic equilibrium system. This study may be helpful to understand the formation of quark-gluon plasma via a chemically non-equilibrated evolution framework.

  2. Development of biological platform for the autotrophic production of biofuels

    Science.gov (United States)

    Khan, Nymul

    The research described herein is aimed at developing an advanced biofuel platform that has the potential to surpass the natural rate of solar energy capture and CO2 fixation. The underlying concept is to use the electricity from a renewable source, such as wind or solar, to capture CO 2 via a biological agent, such as a microbe, into liquid fuels that can be used for the transportation sector. In addition to being renewable, the higher rate of energy capture by photovoltaic cells than natural photosynthesis is expected to facilitate higher rate of liquid fuel production than traditional biofuel processes. The envisioned platform is part of ARPA-E's (Advanced Research Projects Agency - Energy) Electrofuels initiative which aims at supplementing the country's petroleum based fuel production with renewable liquid fuels that can integrate easily with the existing refining and distribution infrastructure (http://arpae. energy.gov/ProgramsProjects/Electrofuels.aspx). The Electrofuels initiative aimed to develop liquid biofuels that avoid the issues encountered in the current generation of biofuels: (1) the reliance of biomass-derived technologies on the inefficient process of photosynthesis, (2) the relatively energy- and resource-intensive nature of agronomic processes, and (3) the occupation of large areas of arable land for feedstock production. The process proceeds by the capture of solar energy into electrical energy via photovoltaic cells, using the generated electricity to split water into molecular hydrogen (H2) and oxygen (O2), and feeding these gases, along with carbon dioxide (CO2) emitted from point sources such as a biomass or coal-fired power plant, to a microbial bioprocessing platform. The proposed microbial bioprocessing platform leverages a chemolithoautotrophic microorganism (Rhodobacter capsulatus or Ralstonia eutropha) naturally able to utilize these gases as growth substrates, and genetically modified to produce a triterpene hydrocarbon fuel

  3. 75 FR 47605 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-08-06

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological..., Office of Vaccines Research and Review, Center for Biologics Evaluation and Research, FDA. FDA intends to...

  4. Cold Atmospheric Plasma: methods of production and application in dentistry and oncology

    OpenAIRE

    Hoffmann, Clotilde; Berganza, Carlos; Zhang, John

    2013-01-01

    Cold Atmospheric Plasma is an ionized gas that has recently been extensively studied by researchers as a possible therapy in dentistry and oncology. Several different gases can be used to produce Cold Atmospheric Plasma such as Helium, Argon, Nitrogen, Heliox, and air. There are many methods of production by which cold atmospheric plasma is created. Each unique method can be used in different biomedical areas. In dentistry, researchers have mostly investigated the antimicrobial effects produc...

  5. Effect of methadone on plasma arginine vasopressin level and urine production in conscious dogs

    NARCIS (Netherlands)

    Hellebrekers, L.J.; Mol, J.A.; Brom, W.E. van den; Wimersma Greidanus, T.B. van

    1987-01-01

    The aim of this study was to examine the effect of i.v. methadone on the plasma arginine-vasopressin (AVP) levels and urine production in 9 conscious dogs. A highly significant increase from the baseline plasma AVP values of below 3 pg/ml occurred within 5 min following methadone administration. Max

  6. 76 FR 55397 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-09-07

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological... the Laboratory of Method Development, Division of Viral Products, Office of Vaccines Research and...

  7. 77 FR 42319 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-07-18

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... lines derived from human tumors for vaccine manufacture. FDA intends to make background material...

  8. 78 FR 5465 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-01-25

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... strains to be included in the influenza virus vaccine for the 2013- 2014 influenza season. FDA intends to...

  9. 75 FR 17929 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-04-08

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... circovirus type 1 (PCV 1) in Rotarix, a U.S. licensed vaccine manufactured by GlaxoSmithKline and indicated...

  10. 76 FR 3639 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-01-20

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... selection of strains to be included in the influenza virus vaccine for the 2011-2012 influenza season. The...

  11. 75 FR 2876 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-01-19

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... selection of strains to be included in the influenza virus vaccine for the 2010 - 2011 influenza season. FDA...

  12. 78 FR 60884 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2013-10-02

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological... of Retroviruses and Laboratory of Immunoregulation, Division of Viral Products, Office of Vaccines...

  13. 76 FR 44016 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2011-07-22

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological..., Division of Bacterial, Parasitic and Allergenic Products, Office of Vaccines Research and Review, Center...

  14. 77 FR 63839 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2012-10-17

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... be open to the public. Name of Committee: Vaccines and Related Biological Products Advisory Committee... immunogenicity of an Influenza A (H5N1) Virus Monovalent Vaccine manufactured by GlaxoSmithKline. On November 15...

  15. 75 FR 61497 - Approval Pathway for Biosimilar and Interchangeable Biological Products; Public Hearing; Request...

    Science.gov (United States)

    2010-10-05

    ... HUMAN SERVICES Food and Drug Administration Approval Pathway for Biosimilar and Interchangeable...'' (biosimilar) to, or ``interchangeable'' with, an FDA-licensed biological product. The purpose of this public... for biological products shown to be biosimilar to, or interchangeable with, an FDA-licensed...

  16. 78 FR 19492 - Draft Guidance for Industry on Formal Meetings Between FDA and Biosimilar Biological Product...

    Science.gov (United States)

    2013-04-01

    ... and Biosimilar Biological Product Sponsors or Applicants; Availability AGENCY: Food and Drug... availability of a draft guidance for industry entitled ``Formal Meetings Between the FDA and Biosimilar... biosimilar biological products regulated by the Center for Drug Evaluation and Research (CDER) and the...

  17. Hydrological structure and biological productivity of the tropical Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Muraleedharan, U.D.; Muraleedharan, P.M.

    Hydrological structure analyses of regions in the tropical Atlantic Ocean have consistently revealed the existence of a typical tropical structure characterized by a nitrate-depleted mixed layer above the thermocline. The important biological...

  18. Chemistry and biology of bengamides and bengazoles, bioactive natural products from Jaspis sponges.

    Science.gov (United States)

    García-Ruiz, Cristina; Sarabia, Francisco

    2014-03-18

    Sponges corresponding to the Jaspidae family have proved to be a prolific source of bioactive natural products. Among these, the bengamides and the bengazoles stand out by virtue of their unprecedented molecular architectures and impressive biological profiles, including antitumor, antibiotic and anthelmintic properties. As a consequence, intense research activity has been devoted to these compounds from both chemical and biological standpoints. This review describes in detail the research into these classes of natural products and the benefits they offer in chemistry and biology.

  19. Hard photon production from unsaturated quark-gluon plasma at two-loop level

    Energy Technology Data Exchange (ETDEWEB)

    Dutta, D. E-mail: ddutta@apsara.barc.ernet.in; Sastry, S.V.S.; Mohanty, A.K.; Kumar, K

    2002-11-18

    The hard photon production from bremsstrahlung and annihilation with scattering that arise at two-loop level are estimated for a chemically non-equilibrated quark-gluon plasma in the framework of Hard Thermal Loop (HTL) resummed effective field theory. The rate of photon production is found to be suppressed due to unsaturated phase space compared to equilibrated plasma. For an unsaturated plasma, unlike the effective one-loop case, the reduction in the effective two-loop processes is found to be independent of gluon fugacity, due to an additional collinear enhancement arising from the decrease in thermal quark mass but strongly depends on quark and antiquark fugacities. It is also found that the photon production is dominated by bremsstrahlung mechanism, since the phase space suppression is higher for annihilation with scattering, in contrast to the equilibrated plasma where annihilation with scattering dominates the photon production.

  20. 9 CFR 113.52 - Requirements for cell lines used for production of biologics.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Requirements for cell lines used for production of biologics. 113.52 Section 113.52 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... STANDARD REQUIREMENTS Ingredient Requirements § 113.52 Requirements for cell lines used for production...

  1. Advancement in bioprocess technology: parallels between microbial natural products and cell culture biologics.

    Science.gov (United States)

    Bandyopadhyay, Arpan A; Khetan, Anurag; Malmberg, Li-Hong; Zhou, Weichang; Hu, Wei-Shou

    2017-02-09

    The emergence of natural products and industrial microbiology nearly eight decades ago propelled an era of bioprocess innovation. Half a century later, recombinant protein technology spurred the tremendous growth of biologics and added mammalian cells to the forefront of industrial producing cells in terms of the value of products generated. This review highlights the process technology of natural products and protein biologics. Despite the separation in time, there is a remarkable similarity in their progression. As the new generation of therapeutics for gene and cell therapy emerges, its process technology development can take inspiration from that of natural products and biologics.

  2. 9 CFR 103.3 - Shipment of experimental biological products.

    Science.gov (United States)

    2010-01-01

    ... Only—Not For Sale,” or equivalent. The U.S. Veterinary License legend shall not appear on such labels... product and for maintaining records of the quantities of experimental product prepared, shipped and...

  3. Plasma production by means of discharge in a spherical cavity

    NARCIS (Netherlands)

    Antsiferov, P. S.; Dorokhin, L. A.; Koshelev, K. N.

    2010-01-01

    The work is devoted to the study of plasma, appearing as a result of cumulation of shock wave with form close to spherical. The shock wave was obtained by triggering of fast discharge (dI/dt about 10(12) A/s) on inner surface of cavity, made from insulator. Spherical cavity with radius 4.5 mm was fi

  4. 9 CFR 101.3 - Biological products and related terms.

    Science.gov (United States)

    2010-01-01

    ... toxin or toxic growth product, which has resulted from the growth of bacterial organisms in a culture... OF AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS DEFINITIONS... bacterial product consisting of an antigenic suspension of organisms or particulate parts of organisms...

  5. Cold Atmospheric Plasma: methods of production and application in dentistry and oncology.

    Science.gov (United States)

    Hoffmann, Clotilde; Berganza, Carlos; Zhang, John

    2013-01-01

    Cold Atmospheric Plasma is an ionized gas that has recently been extensively studied by researchers as a possible therapy in dentistry and oncology. Several different gases can be used to produce Cold Atmospheric Plasma such as Helium, Argon, Nitrogen, Heliox, and air. There are many methods of production by which cold atmospheric plasma is created. Each unique method can be used in different biomedical areas. In dentistry, researchers have mostly investigated the antimicrobial effects produced by plasma as a means to remove dental biofilms and eradicate oral pathogens. It has been shown that reactive oxidative species, charged particles, and UV photons play the main role. Cold Atmospheric Plasma has also found a minor, but important role in tooth whitening and composite restoration. Furthermore, it has been demonstrated that Cold Atmospheric Plasma induces apoptosis, necrosis, cell detachment, and senescence by disrupting the S phase of cell replication in tumor cells. This unique finding opens up its potential therapy in oncology.

  6. Synthetic biology for microbial production of lipid-based biofuels

    Energy Technology Data Exchange (ETDEWEB)

    d’Espaux, Leo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint BioEnergy Inst.; Mendez-Perez, Daniel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint BioEnergy Inst.; Li, Rachel [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint BioEnergy Inst.; Univ. of California, Berkeley, CA (United States). Dept. of Plant and Microbial Biology; Keasling, Jay D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Joint BioEnergy Inst.; Univ. of California, Berkeley, CA (United States). Dept. of Plant and Microbial Biology; Univ. of California, Berkeley, CA (United States). Dept. of Bioengineering, QB3 Inst.; Univ. of California, Berkeley, CA (United States). Dept. of Chemical and Biomolecular Engineering, QB3 Inst.

    2015-10-23

    The risks of maintaining current CO2 emission trends have led to interest in producing biofuels using engineered microbes. Microbial biofuels reduce emissions because CO2 produced by fuel combustion is offset by CO2 captured by growing biomass, which is later used as feedstock for biofuel fermentation. Hydrocarbons found in petroleum fuels share striking similarity with biological lipids. Here in this paper we review synthetic metabolic pathways based on fatty acid and isoprenoid metabolism to produce alkanes and other molecules suitable as biofuels. Lastly, we further discuss engineering strategies to optimize engineered biosynthetic routes, as well as the potential of synthetic biology for sustainable manufacturing.

  7. Synthetic biology for microbial production of lipid-based biofuels.

    Science.gov (United States)

    d'Espaux, Leo; Mendez-Perez, Daniel; Li, Rachel; Keasling, Jay D

    2015-12-01

    The risks of maintaining current CO2 emission trends have led to interest in producing biofuels using engineered microbes. Microbial biofuels reduce emissions because CO2 produced by fuel combustion is offset by CO2 captured by growing biomass, which is later used as feedstock for biofuel fermentation. Hydrocarbons found in petroleum fuels share striking similarity with biological lipids. Here we review synthetic metabolic pathways based on fatty acid and isoprenoid metabolism to produce alkanes and other molecules suitable as biofuels. We further discuss engineering strategies to optimize engineered biosynthetic routes, as well as the potential of synthetic biology for sustainable manufacturing.

  8. Effects of the plasma profiles on photon and pair production in ultrahigh intensity laser solid interaction

    Energy Technology Data Exchange (ETDEWEB)

    Tian, Y. X.; Jin, X. L., E-mail: jinxiaolin@uestc.edu.cn; Yan, W. Z.; Li, J. Q.; Li, B. [Vacuum Electronics National Laboratory, University of Electronic Science and Technology of China, Chengdu 610054 (China); Yu, J. Q. [Vacuum Electronics National Laboratory, University of Electronic Science and Technology of China, Chengdu 610054 (China); John Adams Institute for Accelerator Science, Imperial College London, London SW7 2AZ (United Kingdom)

    2015-12-15

    The model of photon and pair production in strong field quantum electrodynamics is implemented into our 1D3V particle-in-cell code with Monte Carlo algorithm. Using this code, the evolution of the particles in ultrahigh intensity laser (∼10{sup 23} W/cm{sup 2}) interaction with aluminum foil target is observed. Four different initial plasma profiles are considered in the simulations. The effects of initial plasma profiles on photon and pair production, energy spectra, and energy evolution are analyzed. The results imply that one can set an optimal initial plasma profile to obtain the desired photon distributions.

  9. Electrochemical and biological characterization of coatings formed on Ti-15Mo alloy by plasma electrolytic oxidation.

    Science.gov (United States)

    Kazek-Kęsik, Alicja; Krok-Borkowicz, Małgorzata; Pamuła, Elżbieta; Simka, Wojciech

    2014-10-01

    β-Type titanium alloys are considered the future materials for bone implants. To improve the bioactivity of Ti-15Mo, the surface was modified using the plasma electrolytic oxidation (PEO) process. Tricalcium phosphate (TCP, Ca3PO4), wollastonite (CaSiO3) and silica (SiO2) were selected as additives in the anodizing bath to enhance the bioactivity of the coatings formed during the PEO process. Electrochemical analysis of the samples was performed in Ringer's solution at 37°C. The open-circuit potential (EOCP) as a function of time, corrosion potential (ECORR), corrosion current density (jCORR) and polarization resistance (Rp) of the samples were determined. Surface modification improved the corrosion resistance of Ti-15Mo in Ringer's solution. In vitro studies with MG-63 osteoblast-like cells were performed for 1, 3 and 7 days. After 24h, the cells were well adhered on the entire surfaces, and their number increased with increasing culture time. The coatings formed in basic solution with wollastonite exhibited better biological performance compared with the as-ground sample.

  10. Importance of systems biology in engineering microbes for biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Mukhopadhyay, Aindrila; Redding, Alyssa M.; Rutherford, Becky J.; Keasling, Jay D.

    2009-12-02

    Microorganisms have been rich sources for natural products, some of which have found use as fuels, commodity chemicals, specialty chemicals, polymers, and drugs, to name a few. The recent interest in production of transportation fuels from renewable resources has catalyzed numerous research endeavors that focus on developing microbial systems for production of such natural products. Eliminating bottlenecks in microbial metabolic pathways and alleviating the stresses due to production of these chemicals are crucial in the generation of robust and efficient production hosts. The use of systems-level studies makes it possible to comprehensively understand the impact of pathway engineering within the context of the entire host metabolism, to diagnose stresses due to product synthesis, and provides the rationale to cost-effectively engineer optimal industrial microorganisms.

  11. Kinetic study of biological hydrogen production by anaerobic fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Sangeetha, R. [Annamalai Univ., Chidambaram (India). Dept. of Chemical Engineering; Karunanithi, T. [Annamalai Univ., Tamilnadu (India). Dept. of Chemical Engineering

    2009-07-01

    This study examined the kinetics of batch biohydrogen production from glucose. Clostridium pasteurianum was used to produce biohydrogen by dark anaerobic fermentation. The initial substrate concentration, initial pH and temperature were optimized for biohydrogen production. The maximum production of hydrogen under optimum conditions was found to be 5.376 l/l. The kinetic parameters were determined for the optimized medium and conditions in the batch reactor. The by product was expressed as total acidic equivalent. This presentation discussed the logistic equation that was used to model the growth of the organism and described how the kinetic parameters were calculated. The Leudeking piret kinetic model was used to express the hydrogen production and substrate use because it combines both growth associated and non associated contributions. It was concluded the production of biohydrogen can be predicted well using the logistic model for cell growth kinetics and the logistic incorporated Leudeking Piret model for product and substrate utilization kinetics.

  12. Metabolic engineering with systems biology tools to optimize production of prokaryotic secondary metabolites

    DEFF Research Database (Denmark)

    Kim, Hyun Uk; Charusanti, Pep; Lee, Sang Yup;

    2016-01-01

    for the optimal production of various prokaryotic secondary metabolites: native versus heterologous hosts (e.g., Escherichia coli) and rational versus random approaches. This comparative analysis is followed by discussions on systems biology tools deployed in optimizing the production of secondary metabolites....... The potential contributions of additional systems biology tools are also discussed in the context of current challenges encountered during optimization of secondary metabolite production....

  13. The emerging role of reactive oxygen and nitrogen species in redox biology and some implications for plasma applications to medicine and biology

    Science.gov (United States)

    Graves, David B.

    2012-07-01

    Reactive oxygen species (ROS) and the closely related reactive nitrogen species (RNS) are often generated in applications of atmospheric pressure plasmas intended for biomedical purposes. These species are also central players in what is sometimes referred to as ‘redox’ or oxidation-reduction biology. Oxidation-reduction biochemistry is fundamental to all of aerobic biology. ROS and RNS are perhaps best known as disease-associated agents, implicated in diabetes, cancer, heart and lung disease, autoimmune disease and a host of other maladies including ageing and various infectious diseases. These species are also known to play active roles in the immune systems of both animals and plants and are key signalling molecules, among many other important roles. Indeed, the latest research has shown that ROS/RNS play a much more complex and nuanced role in health and ageing than previously thought. Some of the most potentially profound therapeutic roles played by ROS and RNS in various medical interventions have emerged only in the last several years. Recent research suggests that ROS/RNS are significant and perhaps even central actors in the actions of antimicrobial and anti-parasite drugs, cancer therapies, wound healing therapies and therapies involving the cardiovascular system. Understanding the ways ROS/RNS act in established therapies may help guide future efforts in exploiting novel plasma medical therapies. The importance of ROS and RNS to plant biology has been relatively little appreciated in the plasma biomedicine community, but these species are just as important in plants. It appears that there are opportunities for useful applications of plasmas in this area as well.

  14. The chemistry and biology of guanidine natural products.

    Science.gov (United States)

    Berlinck, Roberto G S; Romminger, Stelamar

    2016-03-01

    The present review discusses the isolation, structure determination, synthesis, biosynthesis and biological activities of secondary metabolites bearing a guanidine group. Topics include non-ribosomal peptides, alkaloids, guanidine-bearing terpenes, polyketides and shikimic acid derivatives from natural sources. A critical analysis of some yet underdeveloped aspects of guanidine metabolites is also presented.

  15. Biological production of alcohols from coal through indirect liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Barik, S.; Prieto, S.; Harrison, S.B.; Clausen, E.C.; Gaddy, J.L.

    1988-08-01

    The purpose of this project is to demonstrate the feasibility of producing liquid fuels from the components of synthesis gas through biological indirect liquefaction. The results of pure culture and natural source screening studies aimed at finding organisms capable of carrying out the conversions are presented and discussed. 17 refs., 2 figs., 8 tabs.

  16. Applied systems biology - vanillin production in Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Strucko, Tomas; Eriksen, Jens Christian; Nielsen, J.

    2012-01-01

    Vanillin is the most important aroma compound based on market value, and natural vanillin is extracted from the cured seed pods of the Vanilla orchid. Most of the world’s vanillin, however, is obtained by chemical synthesis from petrochemicals or wood pulp lignins. As an alternative, de novo bios...... in a systems biology setting....

  17. Control of ROS and RNS productions in liquid in atmospheric pressure plasma-jet system

    Science.gov (United States)

    Uchida, Giichiro; Ito, Taiki; Takenaka, Kosuke; Ikeda, Junichiro; Setsuhara, Yuichi

    2016-09-01

    Non-thermal plasma jets are of current interest in biomedical applications such as wound disinfection and even treatment of cancer tumors. Beneficial therapeutic effects in medical applications are attributed to excited species of oxygen and nitrogen from air. However, to control the production of these species in the plasma jet is difficult because their production is strongly dependent on concentration of nitrogen and oxygen from ambient air into the plasma jet. In this study, we analyze the discharge characteristics and the ROS and RNS productions in liquid in low- and high-frequency plasma-jet systems. Our experiments demonstrated the marked effects of surrounding gas near the plasma jet on ROS and RNS productions in liquid. By controlling the surround gas, the O2 and N2 main plasma jets are selectively produced even in open air. We also show that the concentration ratio of NO2- to H2O2 in liquid is precisely tuned from 0 to 0.18 in deionized water by changing N2 gas ratio (N2 / (N2 +O2)) in the main discharge gas, where high NO2- ratio is obtained at N2 gas ratio at N2 / (N2 +O2) = 0 . 8 . The low-frequency plasma jet with controlled surrounding gas is an effective plasma source for ROS and RNS productions in liquid, and can be a useful tool for biomedical applications. This study was partly supported by a Grant-in-Aid for Scientific Research on Innovative Areas ``Plasma Medical Innovation'' (24108003) from the Ministry of Education, Culture, Sports, Science and Technology, Japan (MEXT).

  18. Product surface hardening in non-self-sustained glow discharge plasma before synthesis of superhard coatings

    Science.gov (United States)

    Krasnov, P. S.; Metel, A. S.; Nay, H. A.

    2017-05-01

    Before the synthesis of superhard coating, the product surface is hardened by means of plasma nitriding, which prevents the surface deformations and the coating brittle rupture. The product heating by ions accelerated from plasma by applied to the product bias voltage leads to overheating and blunting of the product sharp edges. To prevent the blunting, it is proposed to heat the products with a broad beam of fast nitrogen molecules. The beam injection into a working vacuum chamber results in filling of the chamber with quite homogeneous plasma suitable for nitriding. Immersion in the plasma of the electrode and heightening of its potential up to 50-100 V initiate a non-self-sustained glow discharge between the electrode and the chamber. It enhances the plasma density by an order of magnitude and reduces its spatial nonuniformity down to 5-10%. When a cutting tool is isolated from the chamber, it is bombarded by plasma ions with an energy corresponding to its floating potential, which is lower than the sputtering threshold. Hence, the sharp edges are sputtered only by fast nitrogen molecules with the same rate as other parts of the tool surface. This leads to sharpening of the cutting tools instead of blunting.

  19. International Conference on Harmonisation; guidance on quality of biotechnological/biological products: derivation and characterization of cell substrates used for production of biotechnological/biological products; availability. Notice. Food and Drug Administration, HHS.

    Science.gov (United States)

    1998-09-21

    The Food and Drug Administration (FDA) is publishing a guidance entitled "Q5D Quality of Biotechnological/Biological Products:Derivation and Characterization of Cell Substrates Used for Production of Biotechnological/Biological Products." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH).The document provides broad guidance on appropriate standards for the derivation and characterization of cell substrates used in the production of biotechnological/biological products and recommends information in these areas that should be presented in marketing applications.

  20. Biological processes for the production of aryl sulfates

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention generally relates to the field of biotechnology as it applies to the production of aryl sulfates using polypeptides or recombinant cells comprising said polypeptides. More particularly, the present invention pertains to polypeptides having aryl sulfotransferase activity......, recombinant host cells expressing same and processes for the production of aryl sulfates employing these polypeptides or recombinant host cells....

  1. Potential for widespread application of biological control of stored-product pests

    DEFF Research Database (Denmark)

    Hansen, Lise Stengaard

    2007-01-01

    Biological control of stored product pests has substantial potential in Europe". This is essentially the conclusion of the activities of a European working group funded by the COST system, an intergovernmental networking system. Working group 4 of COST action 842 (2000-2005) focussed on biological......, beetles and moths; (2) Preventative treatment of bulk commodities against weevils (Sitophilus spp.) and storage mites; (3) Preventative application of egg-parasitoids against moths in packaged products. Development of methods for biological control and of mass production of natural enemies...

  2. Recombinant biologic products versus nutraceuticals from plants - a regulatory choice?

    Science.gov (United States)

    Drake, Pascal M W; Szeto, Tim H; Paul, Mathew J; Teh, Audrey Y-H; Ma, Julian K-C

    2017-01-01

    Biotechnology has transformed the potential for plants to be a manufacturing source of pharmaceutical compounds. Now, with transgenic and transient expression techniques, virtually any biologic, including vaccines and therapeutics, could be manufactured in plants. However, uncertainty over the regulatory path for such new pharmaceuticals has been a deterrent. Consideration has been given to using alternative regulatory paths, including those for nutraceuticals or cosmetic agents. This review will consider these possibilities, and discuss the difficulties in establishing regulatory guidelines for new pharmaceutical manufacturing technologies.

  3. Biological production of hydroxylated aromatics: Optimization strategies for Pseudomonas putida S12

    NARCIS (Netherlands)

    Verhoef, A.

    2010-01-01

    To replace environmentally unfriendly petrochemical production processes, the demand for bio-based production of organic chemicals is increasing. This thesis focuses on the biological production of hydroxylated aromatics from renewable substrates by engineered P. putida S12 including several cases o

  4. 9 CFR 113.51 - Requirements for primary cells used for production of biologics.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Requirements for primary cells used for production of biologics. 113.51 Section 113.51 Animals and Animal Products ANIMAL AND PLANT HEALTH... VECTORS STANDARD REQUIREMENTS Ingredient Requirements § 113.51 Requirements for primary cells used...

  5. 9 CFR 113.53 - Requirements for ingredients of animal origin used for production of biologics.

    Science.gov (United States)

    2010-01-01

    ... 50 percent confluent monolayer culture of primary porcine cells or a porcine cell line of proven... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Requirements for ingredients of animal origin used for production of biologics. 113.53 Section 113.53 Animals and Animal Products ANIMAL AND...

  6. Biological pretreatment and ethanol production from olive cake

    DEFF Research Database (Denmark)

    Jurado, Esperanza; Gavala, Hariklia N.; Baroi, George Nabin

    2010-01-01

    Olive oil is one of the major Mediterranean products, whose nutritional and economic importance is well-known. However the extraction of olive oil yields a highly contaminating residue that causes serious environmental concerns in the olive oil producing countries. The olive cake (OC) coming out...... of the three-phase olive oil production process could be used as low price feedstock for lignocellulosic ethanol production due to its high concentration in carbohydrates. However, the binding of the carbohydrates with lignin may significantly hinder the necessary enzymatic hydrolysis of the polymeric sugars...

  7. Synoptic events force biological productivity in Patagonian fjord ecosystems

    Science.gov (United States)

    Daneri, Giovanni

    2016-04-01

    The annual cycle of primary productivity of the Patagonian fjords has, to date, been described as a two phase system consisting of a short non productive winter phase (during June and July) and a productive phase extending from late winter (August) to autumn (May). Low levels of primary production, phytoplankton biomass and high concentrations of surface nutrients have been described as characterizing winter conditions while pulsed productivity events typifies the productivity pattern during the extended productive season. Pulsed productivity events characterize coastal waters where inorganic nutrients in surface layers are replenished following periods of intensive utilization by autotrophs. Freshwater input in Patagonian fjords in southern Chile (41-55°S) results in one of the largest estuarine regions worldwide. Here strong haline water column stratification prevents nutrient mixing to the surface layers thus potentially shutting off algal production. Our working hypothesis considered that in order to reconcile the observed pulsed productivity pattern, periodic breaking (associated to surface nutrient replenishment) and re-establishment of estuarine conditions (associated to water column stratification) would be required. Up to now however our understanding of the physical processes that control water column conditions in the Patagonian fjord area has been extremely limited. Here we present evidence linking the passage of synoptic low pressure fronts to pulsed productivity events in the Patagonian fjord area. These front controls and influence local processes of interaction between the fjord and the atmosphere generating a rapid water column response. In the specific case of the Puyuhuapi fjord we have been able to show that such synoptic fronts induce surface flow reversal and water column mixing. Phytoplankton blooming occurs after the passage of the synoptic front once calmer conditions prevail and estuarine conditions are re established. The occurrence of

  8. Enhancement in biological response of Ag-nano composite polymer membranes using plasma treatment for fabrication of efficient bio materials

    Science.gov (United States)

    Agrawal, Narendra Kumar; Sharma, Tamanna Kumari; Chauhan, Manish; Agarwal, Ravi; Vijay, Y. K.; Swami, K. C.

    2016-05-01

    Biomaterials are nonviable material used in medical devices, intended to interact with biological systems, which are becoming necessary for the development of artificial material for biological systems such as artificial skin diaphragm, valves for heart and kidney, lenses for eye etc. Polymers having novel properties like antibacterial, antimicrobial, high adhesion, blood compatibility and wettability are most suitable for synthesis of biomaterial, but all of these properties does not exist in any natural or artificial polymeric material. Nano particles and plasma treatment can offer these properties to the polymers. Hence a new nano-biomaterial has been developed by modifying the surface and chemical properties of Ag nanocomposite polymer membranes (NCPM) by Argon ion plasma treatment. These membranes were characterized using different techniques for surface and chemical modifications occurred. Bacterial adhesion and wettability were also tested for these membranes, to show direct use of this new class of nano-biomaterial for biomedical applications.

  9. Tunable Electron Multibunch Production in Plasma Wakefield Accelerators

    CERN Document Server

    Hidding, B; Wittig, G; Aniculaesei, C; Jaroszynski, D; McNeil, B W J; Campbell, L T; Islam, M R; Ersfeld, B; Sheng, Z -M; Xi, Y; Deng, A; Rosenzweig, J B; Andonian, G; Murokh, A; Hogan, M J; Bruhwiler, D L; Cormier, E

    2014-01-01

    Synchronized, independently tunable and focused $\\mu$J-class laser pulses are used to release multiple electron populations via photo-ionization inside an electron-beam driven plasma wave. By varying the laser foci in the laboratory frame and the position of the underdense photocathodes in the co-moving frame, the delays between the produced bunches and their energies are adjusted. The resulting multibunches have ultra-high quality and brightness, allowing for hitherto impossible bunch configurations such as spatially overlapping bunch populations with strictly separated energies, which opens up a new regime for light sources such as free-electron-lasers.

  10. A systems biology strategy reveals biological pathways and plasma biomarker candidates for potentially toxic statin-induced changes in muscle.

    Directory of Open Access Journals (Sweden)

    Reijo Laaksonen

    Full Text Available BACKGROUND: Aggressive lipid lowering with high doses of statins increases the risk of statin-induced myopathy. However, the cellular mechanisms leading to muscle damage are not known and sensitive biomarkers are needed to identify patients at risk of developing statin-induced serious side effects. METHODOLOGY: We performed bioinformatics analysis of whole genome expression profiling of muscle specimens and UPLC/MS based lipidomics analyses of plasma samples obtained in an earlier randomized trial from patients either on high dose simvastatin (80 mg, atorvastatin (40 mg, or placebo. PRINCIPAL FINDINGS: High dose simvastatin treatment resulted in 111 differentially expressed genes (1.5-fold change and p-value<0.05, while expression of only one and five genes was altered in the placebo and atorvastatin groups, respectively. The Gene Set Enrichment Analysis identified several affected pathways (23 gene lists with False Discovery Rate q-value<0.1 in muscle following high dose simvastatin, including eicosanoid synthesis and Phospholipase C pathways. Using lipidomic analysis we identified previously uncharacterized drug-specific changes in the plasma lipid profile despite similar statin-induced changes in plasma LDL-cholesterol. We also found that the plasma lipidomic changes following simvastatin treatment correlate with the muscle expression of the arachidonate 5-lipoxygenase-activating protein. CONCLUSIONS: High dose simvastatin affects multiple metabolic and signaling pathways in skeletal muscle, including the pro-inflammatory pathways. Thus, our results demonstrate that clinically used high statin dosages may lead to unexpected metabolic effects in non-hepatic tissues. The lipidomic profiles may serve as highly sensitive biomarkers of statin-induced metabolic alterations in muscle and may thus allow us to identify patients who should be treated with a lower dose to prevent a possible toxicity.

  11. 9 CFR 113.3 - Sampling of biological products.

    Science.gov (United States)

    2010-01-01

    ... Marek's Disease Vaccine, if such diluent is required to rehydrate or dilute the product before use. The... Diluent prepared for use with Marek's Disease Vaccine shall be submitted upon request from the Animal and...

  12. 9 CFR 112.6 - Packaging biological products.

    Science.gov (United States)

    2010-01-01

    ... containers of the proper amount of diluent as specified in the filed Outline of Production: (1) Marek's Disease Vaccine. (2) Poultry vaccines administered to individual birds using automatic vaccinating...

  13. Sustainable Production Process of Biological Mineral Feed Additives

    OpenAIRE

    Agnieszka Zielinska; Katarzyna Chojnacka; Marjana Simonic

    2009-01-01

    Problem statement: This study discussed the problem of accumulation of Zn and Cu in the topsoil as a result of application of mineral feed additives that possess low bioavailability in animal diet. The review considered the production process of mineral feed additives in which a product supplies microelements in highly bioavailable form. Enrichment of natural biomass of edible microalgae with microelement metal ions, which supply microelements of feeding significance in livestock diet, is con...

  14. Strategies for optimizing algal biology for enhanced biomass production

    Directory of Open Access Journals (Sweden)

    Amanda N. Barry

    2015-02-01

    Full Text Available One of the more environmentally sustainable ways to produce high energy density (oils feed stocks for the production of liquid transportation fuels is from biomass. Photosynthetic carbon capture combined with biomass combustion (point source and subsequent carbon capture and sequestration (BECCS has also been proposed in the Intergovernmental Panel on Climate Change Report as one of the most effective and economical strategies to remediate atmospheric greenhouse gases. To maximize photosynthetic carbon capture efficiency and energy-return-on-investment, we must develop biomass production systems that achieve the greatest yields with the lowest inputs. Numerous studies have demonstrated that microalgae have among the greatest potentials for biomass production. This is in part due to the fact that all alga cells are photoautotrophic, they have active carbon concentrating mechanisms to increase photosynthetic productivity, and all the biomass is harvestable unlike plants. All photosynthetic organisms, however, convert only a fraction of the solar energy they capture into chemical energy (reduced carbon or biomass. To increase aerial carbon capture rates and biomass productivity it will be necessary to identify the most robust algal strains and increase their biomass production efficiency often by genetic manipulation. We review recent large-scale efforts to identify the best biomass producing strains and metabolic engineering strategies to improve aerial productivity. These strategies include optimization of photosynthetic light-harvesting antenna size to increase energy capture and conversion efficiency and the potential development of advanced molecular breeding techniques. To date, these strategies have resulted in up to two-fold increases in biomass productivity.

  15. 75 FR 59729 - Vaccines and Related Biological Products Advisory Committee; Notice of Meeting

    Science.gov (United States)

    2010-09-28

    ... HUMAN SERVICES Food and Drug Administration Vaccines and Related Biological Products Advisory Committee... portion of the meeting will be closed to the public. Name of Committee: Vaccines and Related Biological... for protective antigen-based anthrax vaccines for a post-exposure prophylaxis indication using the...

  16. Sustainable Production Process of Biological Mineral Feed Additives

    Directory of Open Access Journals (Sweden)

    Agnieszka Zielinska

    2009-01-01

    Full Text Available Problem statement: This study discussed the problem of accumulation of Zn and Cu in the topsoil as a result of application of mineral feed additives that possess low bioavailability in animal diet. The review considered the production process of mineral feed additives in which a product supplies microelements in highly bioavailable form. Enrichment of natural biomass of edible microalgae with microelement metal ions, which supply microelements of feeding significance in livestock diet, is considered in term of sustainable production. Approach: Production of microalgae-derived products as mineral feed additives requires elaboration of the processes for cultivation of alga, enrichment process and afterwards recovery of the enriched biomass from the solution to obtain liquid free of cells that could be reused in the next process. In this study membrane bioreactor was considered as a method for separation, both in photobioreactor (growth of microorganism as well as in the enrichment process. Results: Effort involved in thermal and chemical separation techniques is higher than that in mechanical techniques. Membrane bioreactors which are usually applied to treat wastewater, both industrial and domestic. This study discussed method to separate a valuable biomass of enriched microalgae and reuse the solution with residual metal ions that can be used once again in the subsequent biosorption process. Conclusion/Recommendation: Taking into consideration care about the environment it is better to apply membrane modules in the production process in terms of sustainable production. The proposed solution assumed the application of membrane modules as a separation step after enrichment process and biomass recovery.

  17. Some aspects of biological production and fishery resources of the EEZ of India

    Digital Repository Service at National Institute of Oceanography (India)

    Bhargava, R.M.S.

    Region and season-wise biological production in the Exclusive Economic Zone (EEZ) of India has been computed from the data of more than twenty years available at the Indian National Oceanographic Data Centre of the National Institute of Oceanography...

  18. Accessibility condition of wave propagation and multicharged ion production in electron cyclotron resonance ion source plasma

    Energy Technology Data Exchange (ETDEWEB)

    Kato, Yushi, E-mail: kato@eei.eng.osaka-u.ac.jp; Yano, Keisuke; Nishiokada, Takuya; Nagaya, Tomoki; Kimura, Daiju; Kumakura, Sho; Imai, Youta; Hagino, Shogo; Otsuka, Takuro; Sato, Fuminobu [Division of Electrical, Electronic and Information Engineering, Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita-shi, Osaka 565-0871 (Japan)

    2016-02-15

    A new tandem type source of electron cyclotron resonance (ECR) plasmas has been constructing for producing synthesized ion beams in Osaka University. Magnetic mirror field configuration with octupole magnets can be controlled to various shape of ECR zones, namely, in the 2nd stage plasma to be available by a pair mirror and a supplemental coil. Noteworthy correlations between these magnetic configurations and production of multicharged ions are investigated in detail, as well as their optimum conditions. We have been considering accessibility condition of electromagnetic and electrostatic waves propagating in ECR ion source plasma, and then investigated their correspondence relationships with production of multicharged ions. It has been clarified that there exits efficient configuration of ECR zones for producing multicharged ion beams experimentally, and then has been suggested from detail accessibility conditions on the ECR plasma that new resonance, i.e., upper hybrid resonance, must have occurred.

  19. 2 D gel based analysis of biological variability of the human plasma proteome

    DEFF Research Database (Denmark)

    Rentsch, Maria Louise; Jessen, Flemming

    Human blood plasma is a valuable specimen for the biomarker discovery process, since it is easily accessible and contains proteins that are synthesised, secreted or lost from cells and tissue. In this way, changes in plasma proteome reflect the current state of the organism. The analysis of plasma...... by one-week interval. Blood samples were drawn before the meal intake and five times during 24 hours for proteome analysis. Plasma was fractionated by use of IgY-12 spin column depleting the 12 highly abundant proteins and further processed for two-dimensional gel electrophoresis. The plasma proteome...... proteome is yet challenging due to the huge dynamic range of protein abundance. When evaluating a potential biomarker, stable basal level of the protein is needed before it can be considered a functional biomarker. However, basal level differences of plasma proteins are naturally occurring between...

  20. Thermal charm and charmonium production in quark gluon plasma

    Directory of Open Access Journals (Sweden)

    Kai Zhou

    2016-07-01

    Full Text Available We study the effect of thermal charm production on charmonium regeneration in high energy nuclear collisions. By solving the kinetic equations for charm quark and charmonium distributions in Pb+Pb collisions, we calculate the global and differential nuclear modification factors RAA(Npart and RAA(pt for J/ψ s. Due to the thermal charm production in hot medium, the charmonium production source changes from the initially created charm quarks at SPS, RHIC and LHC to the thermally produced charm quarks at Future Circular Collider (FCC, and the J/ψ suppression (RAA1 at FCC at low transverse momentum.

  1. Systems-Level Synthetic Biology for Advanced Biofuel Production

    Energy Technology Data Exchange (ETDEWEB)

    Ruffing, Anne [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jensen, Travis J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Strickland, Lucas Marshall [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Meserole, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Tallant, David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    Cyanobacteria have been shown to be capable of producing a variety of advanced biofuels; however, product yields remain well below those necessary for large scale production. New genetic tools and high throughput metabolic engineering techniques are needed to optimize cyanobacterial metabolisms for enhanced biofuel production. Towards this goal, this project advances the development of a multiple promoter replacement technique for systems-level optimization of gene expression in a model cyanobacterial host: Synechococcus sp. PCC 7002. To realize this multiple-target approach, key capabilities were developed, including a high throughput detection method for advanced biofuels, enhanced transformation efficiency, and genetic tools for Synechococcus sp. PCC 7002. Moreover, several additional obstacles were identified for realization of this multiple promoter replacement technique. The techniques and tools developed in this project will help to enable future efforts in the advancement of cyanobacterial biofuels.

  2. Biological pretreatment and ethanol production from olive cake

    DEFF Research Database (Denmark)

    Jurado, Esperanza; Gavala, Hariklia N.; Baroi, George Nabin

    2010-01-01

    Olive oil is one of the major Mediterranean products, whose nutritional and economic importance is well-known. However the extraction of olive oil yields a highly contaminating residue that causes serious environmental concerns in the olive oil producing countries. The olive cake (OC) coming out...... of the three-phase olive oil production process could be used as low price feedstock for lignocellulosic ethanol production due to its high concentration in carbohydrates. However, the binding of the carbohydrates with lignin may significantly hinder the necessary enzymatic hydrolysis of the polymeric sugars...... before ethanol fermentation. Treatment with three white rot fungi, Phaneroachaete chrysosporium, Ceriporiopsis subvermispora and Ceriolopsis polyzona has been applied on olive cake in order to investigate the potential for performing delignification and thus enhancing the efficiency of the subsequent...

  3. Synthetic biology tools for bioprospecting of natural products in eukaryotes.

    Science.gov (United States)

    Unkles, Shiela E; Valiante, Vito; Mattern, Derek J; Brakhage, Axel A

    2014-04-24

    Filamentous fungi have the capacity to produce a battery of natural products of often unknown function, synthesized by complex metabolic pathways. Unfortunately, most of these pathways appear silent, many in intractable organisms, and their products consequently unidentified. One basic challenge is the difficulty of expressing a biosynthesis pathway for a complex natural product in a heterologous eukaryotic host. Here, we provide a proof-of concept solution to this challenge and describe how the entire penicillin biosynthesis pathway can be expressed in a heterologous host. The method takes advantage of a combination of improved yeast in vivo cloning technology, generation of polycistronic mRNA for the gene cluster under study, and an amenable and easily manipulated fungal host, i.e., Aspergillus nidulans. We achieve expression from a single promoter of the pathway genes to yield a large polycistronic mRNA by using viral 2A peptide sequences to direct successful cotranslational cleavage of pathway enzymes.

  4. Recent advances in biological production of sugar alcohols.

    Science.gov (United States)

    Park, Yong-Cheol; Oh, Eun Joong; Jo, Jung-Hyun; Jin, Yong-Su; Seo, Jin-Ho

    2016-02-01

    Sugar alcohols, such as xylitol, mannitol, sorbitol, and erythritol are emerging food ingredients that provide similar or better sweetness/sensory properties of sucrose, but are less calorigenic. Also, sugar alcohols can be converted into commodity chemicals through chemical catalysis. Biotechnological production offers the safe and sustainable supply of sugar alcohols from renewable biomass. In contrast to early studies that aimed to produce sugar alcohols with microorganisms capable of producing sugar alcohols naturally, recent studies have focused on rational engineering of metabolic pathways to improve yield and productivity as well as to use inexpensive and abundant substrates. Metabolic engineering strategies to utilize inexpensive substrates, alleviate catabolite repression, reduce byproduct formation, and manipulate redox balances led to enhanced production of sugar alcohols.

  5. Biological effects of bacterial pigment undecylprodigiosin on human blood cells treated with atmospheric gas plasma in vitro.

    Science.gov (United States)

    Lazović, Saša; Leskovac, Andreja; Petrović, Sandra; Senerovic, Lidija; Krivokapić, Nevena; Mitrović, Tatjana; Božović, Nikola; Vasić, Vesna; Nikodinovic-Runic, Jasmina

    2017-01-01

    It is known that some bacterial species are more resilient to different kinds of irradiation due to the naturally developed protective mechanisms and compounds such as pigments. On the other hand, reasoned tissue engineering using plasma remains a critical task and requires very precise control of plasma parameters in order to mitigate its potential detrimental effects. Here we isolated a natural protective agent, microbially produced undecylprodigiosin ((5'Z)-4'-methoxy-5'-[(5-undecyl-1H-pyrrol-2-yl)methylene]-1H,5'H-2,2'-bipyrrole), and investigated its effects on human blood cells independently and in combination with plasma. Two approaches were applied; the first, undecylprodigiosin (UP pigment) was added to the blood cultures, which then were exposed to plasma (pre-treatment); and the second- the blood cultures were exposed to plasma and then treated with pigment (post-treatment). The interactions of plasma and UP pigment with blood cells were investigated by conducting a series of biological tests providing the information regarding their genotoxicity, cytotoxicity and redox modulating activities. The exposure of cells to plasma induced oxidative stress as well as certain genotoxic and cytotoxic effects seen as elevated micronuclei incidence, decreased cell proliferation and enhanced apoptosis. In blood cultures treated with UP pigment alone, we found that both cytotoxic and protective effects could be induced depending on the concentration used. The highest UP pigment concentration increased lipid peroxidation and the incidence of micronuclei by more than 70% with maximal suppression of cell proliferation. On the contrary, we found that the lowest UP pigment concentration displayed protective effects. In combined treatments with plasma and UP pigment, we found that UP pigment could provide spatial shielding to plasma exposure. In the pre-treatment approach, the incidence of micronuclei was reduced by 35.52% compared to control while malondialdehyde level

  6. Mechanical, In Vitro Antimicrobial and Biological Properties of Plasma Sprayed Silver-Doped Hydroxyapatite Coating

    OpenAIRE

    Roy, Mangal; Fielding, Gary A.; BEYENAL, Haluk; Bandyopadhyay, Amit; Bose, Susmita

    2012-01-01

    Implant related infection is one of the key concerns in total joint hip arthroplasties. In order to reduce bacterial adhesion, silver (Ag) / silver oxide (Ag2O) doping was used in plasma sprayed hydroxyapatite (HA) coating on titanium substrate. HA powder was doped with 2.0, 4.0 and 6.0 wt% Ag, heat treated at 800 °C and used for plasma spray coating using a 30 kW plasma spray system, equipped with supersonic nozzle. Application of supersonic plasma nozzle significantly reduced phase decompos...

  7. Plasma torch production of Ti/Al nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, Jonathan [Los Alamos National Laboratory; Zea, Hugo [UNM MECH.ENG; Cheng, Lily [UNM MECH.ENG.; Luhrs, Claudia [UNM MECH.ENG.; Courtney, Matthew [UNM MECH.ENG.

    2009-01-01

    Using the Aerosol-through-Plasma (A-T-P) technique high surface area bi-cationic (Ti-Al) oxide particles of a range of stoichiometries were produced that showed remarkable resistance to sintering. Specifically, we found that homogeneous nanoparticles with surface areas greater than 150 m{sup 2}/gm were produced at all stoichiometries. In particular, for particles with a Ti:Al ratio of 1:3 a surface area of just over 200 m{sup 2}/gm was measured using the BET method. The most significant characteristic of these particles was that their sinter resistance was far superior to that of TiAl particles produced using any other method. For example, A-T-P generated particles retained >70% of their surface area even after sintering at 1000 C for five hours. In contrast, particles made using all other methods lost virtually all of their surface area after an 800 C treatment.

  8. Improvements in Fermentative Biological Hydrogen Production Through Metabolic Engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hallenbeck, P. C.; Ghosh, D.; Sabourin-Provost, G.

    2009-07-01

    Dramatically rising oil prices and increasing awareness of the dire environmental consequences of fossil fuel use, including startling effects of climate change, are refocusing attention world-wide on the search for alternative fuels. Hydrogen is poised to become an important future energy carrier. Renewable hydrogen production is pivotal in making it a truly sustainable replacement for fossil fuels. (Author)

  9. Bovine mammary stem cells: Cell biology meets production agriculture

    Science.gov (United States)

    Mammary stem cells (MaSC) provide for net growth, renewal and turnover of mammary epithelial cells, and are therefore potential targets for strategies to increase production efficiency. Appropriate regulation of MaSC can potentially benefit milk yield, persistency, dry period management and tissue ...

  10. Biological production of monoethanolamine by engineered Pseudomonas putida S12

    NARCIS (Netherlands)

    Foti, M.J.; Médici, R.; Ruijssenaars, H.J.

    2013-01-01

    Pseudomonas putida S12 was engineered for the production of monoethanolamine (MEA) from glucose via the decarboxylation of the central metabolite l-serine, which is catalyzed by the enzyme l-serine decarboxylase (SDC).The host was first evaluated for its tolerance towards MEA as well as its

  11. 21 CFR 610.68 - Exceptions or alternatives to labeling requirements for biological products held by the Strategic...

    Science.gov (United States)

    2010-04-01

    ... requirements for biological products held by the Strategic National Stockpile. 610.68 Section 610.68 Food and... GENERAL BIOLOGICAL PRODUCTS STANDARDS Labeling Standards § 610.68 Exceptions or alternatives to labeling requirements for biological products held by the Strategic National Stockpile. (a) The appropriate FDA...

  12. 37 CFR 1.775 - Calculation of patent term extension for a human drug, antibiotic drug or human biological product.

    Science.gov (United States)

    2010-07-01

    ... extension for a human drug, antibiotic drug or human biological product. 1.775 Section 1.775 Patents... drug or human biological product is eligible for extension, the term shall be extended by the time as... term of the patent for a human drug, antibiotic drug or human biological product will be extended...

  13. Thermodynamical study on production of acetylene from coal pyrolysis in hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Wang, F.; Guo, W.K.; Yuan, X.Q.; Zhao, T.Z. [Fudan University, Shanghai (China). Inst. for Modern Physics

    2006-05-15

    The chemical thermodynamic equilibrium of acetylene production by coal pyrolysis in hydrogen plasma was studied. The thermodynamic equilibrium is obtained by using the method of free energy. Calculated results show that the hydrogen concentration in the equilibrium system is very important for the acetylene production by coal conversion and the energy consumption for the production of acetylene per-kilogram strongly depends on the hydrogen concentration and the temperature.

  14. Thermodynamical Study on Production of Acetylene from Coal Pyrolysis in Hydrogen Plasma

    Science.gov (United States)

    Wang, Fei; Guo, Wenkang; Yuan, Xingqiu; Zhao, Taize

    2006-05-01

    The chemical thermodynamic equilibrium of acetylene production by coal pyrolysis in hydrogen plasma was studied. The thermodynamic equilibrium is obtained by using the method of free energy. Calculated results show that the hydrogen concentration in the equilibrium system is very important for the acetylene production by coal conversion and the energy consumption for the production of acetylene per-kilogram strongly depends on the hydrogen concentration and the temperature.

  15. Chemical biology--identification of small molecule modulators of cellular activity by natural product inspired synthesis.

    Science.gov (United States)

    Hübel, Katja; Lessmann, Torben; Waldmann, Herbert

    2008-07-01

    The aim of this tutorial review is to introduce the reader to the concept, synthesis and application of natural product-inspired compound collections as an important field in chemical biology. This review will discuss how potentially interesting scaffolds can be identified (structural classification of natural products), synthesized in an appropriate manner (including stereoselective transformations for solid phase-bound compounds) and tested in biological assays (cell-based screening as well as biochemical in vitro assays). These approaches will provide the opportunity to identify new and interesting compounds as well as new targets for chemical biology and medicinal chemistry research.

  16. 21 CFR 640.74 - Modification of Source Plasma.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Modification of Source Plasma. 640.74 Section 640...) BIOLOGICS ADDITIONAL STANDARDS FOR HUMAN BLOOD AND BLOOD PRODUCTS Source Plasma § 640.74 Modification of Source Plasma. (a) Upon approval by the Director, Center for Biologics Evaluation and Research, Food and...

  17. Systems Biology in Animal Production and Health, Vol. 1

    DEFF Research Database (Denmark)

    This two-volume work provides an overview on various state of the art experimental and statistical methods, modeling approaches and software tools that are available to generate, integrate and analyze multi-omics datasets in order to detect biomarkers, genetic markers and potential causal genes...... for improved animal production and health. The book will contain online resources where additional data and programs can be accessed. Some chapters also come with computer programming codes and example datasets to provide readers hands-on (computer) exercises. This first volume presents the basic principles...... and (bioinformatic) tools available to model and analyse these data sets along with phenotypes in animal production and health. This book is suitable for both students and teachers in animal sciences and veterinary medicine as well as to researchers in this discipline....

  18. Systems Biology in Animal Production and Health, Vol. 2

    DEFF Research Database (Denmark)

    This two-volume work provides an overview on various state of the art experimental and statistical methods, modeling approaches and software tools that are available to generate, integrate and analyze multi-omics datasets in order to detect biomarkers, genetic markers and potential causal genes...... for improved animal production and health. The book will contain online resources where additional data and programs can be accessed. Some chapters also come with computer programming codes and example datasets to provide readers hands-on (computer) exercises. This second volume deals with integrated modeling...... and analyses of multi-omics datasets from theoretical and computational approaches and presents their applications in animal production and health as well as veterinary medicine to improve diagnosis, prevention and treatment of animal diseases. This book is suitable for both students and teachers in animal...

  19. Time-ordered product expansions for computational stochastic system biology.

    Science.gov (United States)

    Mjolsness, Eric

    2013-06-01

    The time-ordered product framework of quantum field theory can also be used to understand salient phenomena in stochastic biochemical networks. It is used here to derive Gillespie's stochastic simulation algorithm (SSA) for chemical reaction networks; consequently, the SSA can be interpreted in terms of Feynman diagrams. It is also used here to derive other, more general simulation and parameter-learning algorithms including simulation algorithms for networks of stochastic reaction-like processes operating on parameterized objects, and also hybrid stochastic reaction/differential equation models in which systems of ordinary differential equations evolve the parameters of objects that can also undergo stochastic reactions. Thus, the time-ordered product expansion can be used systematically to derive simulation and parameter-fitting algorithms for stochastic systems.

  20. Production characteristics of reactive oxygen/nitrogen species in water using atmospheric pressure discharge plasmas

    Science.gov (United States)

    Takahashi, Kazuhiro; Satoh, Kohki; Itoh, Hidenori; Kawaguchi, Hideki; Timoshkin, Igor; Given, Martin; MacGregor, Scott

    2016-07-01

    A pulsed discharge, a DC corona discharge, and a plasma jet are separately generated above a water surface, and reactive oxygen species and reactive nitrogen species (ROS/RNS) in the water are investigated. ROS/RNS in water after the sparging of the off-gas of a packed-bed dielectric barrier discharge (PB-DBD) are also investigated. H2O2, NO2 -, and NO3 - are detected after plasma exposure and only NO3 - after off-gas sparging. Short-lifetime species in plasma are found to play an important role in H2O2 and NO2 - production and long-lifetime species in NO3 - production. NO x may inhibit H2O2 production through OH consumption to produce HNO2 and HNO3. O3 does not contribute to ROS/RNS production. The pulsed plasma exposure is found to be effective for the production of H2O2 and NO2 -, and the off-gas sparging of the PB-DBD for the production of NO3 -.

  1. A turning point for natural product discovery--ESF-EMBO research conference: synthetic biology of antibiotic production.

    Science.gov (United States)

    Takano, Eriko; Bovenberg, Roel A L; Breitling, Rainer

    2012-03-01

    Synthetic Biology is in a critical phase of its development: it has finally reached the point where it can move from proof-of-principle studies to real-world applications. Secondary metabolite biosynthesis, especially the discovery and production of antibiotics, is a particularly relevant target area for such applications of synthetic biology. The first international conference to explore this subject was held in Spain in October 2011. In four sessions on General Synthetic Biology, Filamentous Fungal Systems, Actinomyces Systems, and Tools and Host Structures, scientists presented the most recent technological and scientific advances, and a final-day Forward Look Plenary Discussion identified future trends in the field.

  2. Preface for special issue on biological products%生物制品专刊序言

    Institute of Scientific and Technical Information of China (English)

    刘文军

    2011-01-01

    生物制品是一类预防,诊断和治疗疫病的特殊制剂.生物制品的研发是融合微生物学、免疫学、分子生物学、细胞学、基因工程及发酵工艺等学科知识的综合技术体现.生物制品产业是整个生物技术产业的核心和热点.近年来,我国在生物制品研发方面取得了较大进步,为促进我国生物制品研究的交流,本期"生物制品"专刊集中展现了我国生物制品研究人员在预防生物制品、诊断制品、治疗生物制品领域所取得的最新进展.%Biological products are a kind of special agents for the prevention, diagnosis, and treatment of diseases. The research and development of biological products come from the combined knowledge of many subjects, such as microbiology,immunology, molecular biology, cytology, genetic engineering and fermentation technology. Biological products industry is the core and the hot spot of the biotechnology industry. In recent years, China has made some advances in biological products research and development. To promote biological products research in China, invited reviews and selected research articles were published in this special issue of “Biological Products”. The reviews and research articles focus on the field of the biological products for the prevention, diagnosis, and treatment of disease.

  3. Production, Secretion and Biological Activity of Bacillus cereus Enterotoxins

    Directory of Open Access Journals (Sweden)

    Sonia Senesi

    2010-06-01

    Full Text Available Bacillus cereus behaves as an opportunistic pathogen frequently causing gastrointestinal diseases, and it is increasingly recognized to be responsible for severe local or systemic infections. Pathogenicity of B. cereus mainly relies on the secretion of a wide array of toxins and enzymes and also on the ability to undergo swarming differentiation in response to surface-sensing. In this report, the pathogenicity exerted by B. cereus toxins is described with particular attention to the regulatory mechanisms of production and secretion of HBL, Nhe and CytK enterotoxins.

  4. Regeneration of nutrients and biological productivity in Antarctic waters

    Digital Repository Service at National Institute of Oceanography (India)

    Verlecar, X.N.; Somasundar, K.; Qasim, S.Z.

    regression coefficients (Alvarez Borrego et al. 1975). Linear mixing relationship» of the water masses were identified with the help of 8 salinity plots. Based on the end member characteris tics ()f the 2 water masses, the nutrient anomalies were derived... and from 0.4 to 3.33 mg C m- 3 h- 1 respectively (Table 1). In the eupho tic column daily production ranged from 0.3 to 1.03 g C m- 2 d- 1 and chlorophyll a from 21.1 to 85.5 mg m- 2 (Table 2). Microscopic examination of 500 ml of sedimented water samples...

  5. Red wine prevents the postprandial increase in plasma cholesterol oxidation products: a pilot study.

    Science.gov (United States)

    Natella, F; Macone, A; Ramberti, A; Forte, M; Mattivi, F; Matarese, R M; Scaccini, C

    2011-06-28

    Moderate wine consumption has been shown to lower cardiovascular risk. One of the mechanisms could involve the control of postprandial hyperlipaemia, a well-defined risk factor for atherosclerosis, reasonably by reducing the absorption of lipid oxidised species from the meal. The objective of the present study was to investigate whether wine consumption with the meal is able to reduce the postprandial increase in plasma lipid hydroperoxides and cholesterol oxidation products, in human subjects. In two different study sessions, twelve healthy volunteers consumed the same test meal rich in oxidised and oxidisable lipids (a double cheeseburger), with 300 ml of water (control) or with 300 ml of red wine (wine). The postprandial plasma concentration of cholesterol oxidation products was measured by GC-MS. The control meal induced a significant increase in the plasma concentration of lipid hydroperoxides and of two cholesterol oxidation products, 7-β-hydroxycholesterol and 7-ketocholesterol. The postprandial increase in lipid hydroperoxides and cholesterol oxidation products was fully prevented by wine when consumed with the meal. In conclusion, the present study provides evidence that consumption of wine with the meal could prevent the postprandial increase in plasma cholesterol oxidation products.

  6. SOURCE, PRODUCTION AND BIOLOGICAL ACTIVITIES OF PICEATANNOL: A REVIEW

    Directory of Open Access Journals (Sweden)

    A. Kukreja*, A. Mishra and A. Tiwari

    2013-10-01

    Full Text Available Phenolic compounds are group of molecules which contain different families of secondary metabolites. Phenolic compounds, secondary metabolites, are abundantly found in plants and are mostly categorized into two major groups: non-soluble compounds and soluble compounds. Stilbenes which come under the category of soluble compounds of phenolics are small molecules, ranges in their weight from ~200 to 300 g/mol and are found in diverse plants. These compounds are produced in plants via phenylpropanoid pathway. Under unfavourable conditions such as microbial or viral attack, ultraviolet light exposure and disease in plants, stilbenes are synthesized and act as natural agents to protect plants. Piceatannol, a natural stilbene, is found in different plant species and is beneficial for human health. It possesses various pharmacological properties such as antioxidant, antitumor, anti-inflammatory and anti-carcinogenic activities. This review paper focuses on piceatannol, its sources, chemical synthesis mechanism, production and its useful applications in various diseases.

  7. Development of biological functional material and product from Nelumbo nucifera

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Il Yun; Park, Yong Dae; Jin, Chang Hyun; Choi, Dae Seong

    2008-01-15

    The solvent extracts of Nelumbo nucifera G. were investigated for the activities of antioxidant, whitening, anti-wrinkle and antimicrobial effects to apply as a functional ingredient for cosmetic products. The electron donating ability of irradiated NN-L extract was above 85% at the concentration of 50ppm. The superoxide dismutase(SOD)-like activity of irradiated NN-L extract was about 76% at 1,000ppm concentration. The xanthine oxidase inhibitory effect of irradiated NN-L extract was about 15% at 1,000ppm. The tyrosinase inhibitory effect of irradiated NN-L extract was about 18% at 1,000ppm. Anti-wrinkle effect, the elastase inhibition activity of irradiated NN-L extract was about 45% at 1,000ppm concentration. All these findings suggested that Nelumbo nucifera G. has a great potential as a cosmeceutical ingredient.

  8. Plasma chemical production of stable isotopes of germanium from its fluorides

    Science.gov (United States)

    Kornev, Roman; Sennikov, Peter

    2016-08-01

    The reduction process of 72GeF4 in hydrogen plasma of RF-discharge (13.56 MHz) was experimentally investigated. It was found that 72Ge, polyfluorogermanes and gaseous HF were the main products of conversion. The behavior of the main electroactive impurities and of metal impurities in the process of hydrogen reduction of 72GeF4 was considered. Based on the data of emission spectroscopy of chemically active plasma, assumptions were made about the main plasma-chemical reactions responsible for the process of hydrogen reduction of 72GeF4. A single crystal of n-type with concentration of charge carriers of Czochralski method after the process of zone recrystallization of 72Ge. Contribution to the topical issue "6th Central European Symposium on Plasma Chemistry (CESPC-6)", edited by Nicolas Gherardi, Ester Marotta and Cristina Paradisi

  9. A novel biological hydrogen production system. Impact of organic loading

    Energy Technology Data Exchange (ETDEWEB)

    Hafez, Hisham; Nakhla, George; El Naggar, Hesham [Western Ontario Univ. (Canada)

    2010-07-01

    The patent-pending system comprises a novel biohydrogen reactor with a gravity settler for decoupling of SRT from HRT. Two biohydrogenators were operated for 220 days at 37 C, hydraulic retention time 8 h and solids retention time ranged from 1.4 to 2 days under four different glucose concentrations of 2, 8, 16, 32, 48 and 64 g/L, corresponding to organic loading rates of 6.5-206 kg COD/m{sup 3}-d, and started up using anaerobically-digested sludge from the St. Marys wastewater treatment plant (St.Mary, Ontario, Canada) as the seed. The system steadily produced hydrogen with no methane. A maximum hydrogen yield of 3.1 mol H{sub 2} /mol glucose was achieved in the system for all the organic loading rates with an average of 2.8mol H{sub 2} /mol glucose. Acetate and butyrate were the main effluent liquid products at concentrations ranging from 640-7400 mg/L and 400-4600 mg/l, respectively, with no lactate detection. Microbial community analysis using denaturing gradient gel electrophoresis (DGGE) confirmed the absence of lactate producing bacteria Lactobacillus fermentum and other non-hydrogen producing species, and the predominance of various Clostridium species. Biomass concentrations in the biohydrogenators were steady, during the runs, varying form 1500 mg/L at the OLR of 6.5 kg COD/m{sup 3}-d to 14000 mg/L at the 104 kg COD/m{sup 3}-d, thus emphasizing the potential of this novel system for sustained stable hydrogen production and prevention of biomass washout. (orig.)

  10. Effect of Wall Material on H– Production in a Plasma Sputter-Type Ion Source

    Directory of Open Access Journals (Sweden)

    Y. D. M. Ponce

    2004-12-01

    Full Text Available The effect of wall material on negative hydrogen ion (H– production was investigated in a multicusp plasma sputter-type ion source (PSTIS. Steady-state cesium-seeded hydrogen plasma was generated by a tungsten filament, while H– was produced through surface production using a molybdenum sputter target. Plasma parameters and H– yields were determined from Langmuir probe and Faraday cup measurements, respectively. At an input hydrogen pressure of 1.2 mTorr and optimum plasma discharge parameters Vd = –90 V and Id = –2.25 A, the plasma parameters ne was highest and T–e was lowest as determined from Langmuir probe measurements. At these conditions, aluminum generates the highest ion current density of 0.01697 mA/cm2, which is 64% more than the 0.01085 mA/cm2 that stainless steel produces. The yield of copper, meanwhile, falls between the two materials at 0.01164 mA/cm2. The beam is maximum at Vt = –125 V. Focusing is achieved at VL = –70 V for stainless steel, Vt = –60 V for aluminum, and Vt = –50 V for copper. The results demonstrate that proper selection of wall material can greatly enhance the H– production of the PSTIS.

  11. Pharmacogenomic Biomarkers: an FDA Perspective on Utilization in Biological Product Labeling.

    Science.gov (United States)

    Schuck, Robert N; Grillo, Joseph A

    2016-05-01

    Precision medicine promises to improve both the efficacy and safety of therapeutic products by better informing why some patients respond well to a drug, and some experience adverse reactions, while others do not. Pharmacogenomics is a key component of precision medicine and can be utilized to select optimal doses for patients, more precisely identify individuals who will respond to a treatment and avoid serious drug-related toxicities. Since pharmacogenomic biomarker information can help inform drug dosing, efficacy, and safety, pharmacogenomic data are critically reviewed by FDA staff to ensure effective use of pharmacogenomic strategies in drug development and appropriate incorporation into product labels. Pharmacogenomic information may be provided in drug or biological product labeling to inform health care providers about the impact of genotype on response to a drug through description of relevant genomic markers, functional effects of genomic variants, dosing recommendations based on genotype, and other applicable genomic information. The format and content of labeling for biologic drugs will generally follow that of small molecule drugs; however, there are notable differences in pharmacogenomic information that might be considered useful for biologic drugs in comparison to small molecule drugs. Furthermore, the rapid entry of biologic drugs for treatment of rare genetic diseases and molecularly defined subsets of common diseases will likely lead to increased use of pharmacogenomic information in biologic drug labels in the near future. In this review, we outline the general principles of therapeutic product labeling and discuss the utilization of pharmacogenomic information in biologic drug labels.

  12. Metabolic Engineering for Production of Biorenewable Fuels and Chemicals: Contributions of Synthetic Biology

    Directory of Open Access Journals (Sweden)

    Laura R. Jarboe

    2010-01-01

    Full Text Available Production of fuels and chemicals through microbial fermentation of plant material is a desirable alternative to petrochemical-based production. Fermentative production of biorenewable fuels and chemicals requires the engineering of biocatalysts that can quickly and efficiently convert sugars to target products at a cost that is competitive with existing petrochemical-based processes. It is also important that biocatalysts be robust to extreme fermentation conditions, biomass-derived inhibitors, and their target products. Traditional metabolic engineering has made great advances in this area, but synthetic biology has contributed and will continue to contribute to this field, particularly with next-generation biofuels. This work reviews the use of metabolic engineering and synthetic biology in biocatalyst engineering for biorenewable fuels and chemicals production, such as ethanol, butanol, acetate, lactate, succinate, alanine, and xylitol. We also examine the existing challenges in this area and discuss strategies for improving biocatalyst tolerance to chemical inhibitors.

  13. Performance goals for immunoglobulins and serum free light chain measurements in plasma cell dyscrasias can be based on biological variation.

    Science.gov (United States)

    Hansen, Charlotte Toftmann

    2016-06-01

    Measurements of immunoglobulins and serum free light chains (sFLC) are frequently used in patients with monoclonal plasma cell dyscrasia (PCD). For optimum patient care, well-defined performance standards or goals for the measured concentrations of immunoglobulins and sFLC are required. Generally, data based on biological variation is a good and reliable method for setting desirable performance standards; this also applies for the measurements of paraprotein and sFLC. The benefits of this approach are several. Among others, it is independent of the clinician, and it provides us with information about reference change value and index of individuality. Several studies on biological variation of both immunoglobulins and sFLC have been published, and mostly the studies are well performed. The studies normally show small within-subject biological variation resulting in strict analytical goals, which in most cases are difficult to meet. Nevertheless, we still need further information on biological variation of immunoglobulins and sFLC in patients with PCD and in the elderly, which are the main target populations for the two measurands. Furthermore, to improve data on biological variation of immunoglobulins and sFLC, studies accounting for number of individuals, samples, and replicates, as well as time length of the studies are needed.

  14. The role of plasma adenosine deaminase in chemoattractant-stimulated oxygen radical production in neutrophils.

    Science.gov (United States)

    Kälvegren, Hanna; Fridfeldt, Jonna; Bengtsson, Torbjörn

    2010-06-01

    Adenosine deaminase (ADA) has a role in many immunity mediated disorders, such as asthma, tuberculosis and coronary artery disease. This study aims to investigate the ability of plasma ADA to modulate reactive oxygen species (ROS) production in neutrophils, and examine the involvement of adenosine and the cyclic AMP signaling pathway in this process. Neutrophils were stimulated, in the absence or presence of plasma, with the chemotactic peptide fMLP (formyl-methionyl-leucyl-phenylalanine), and the ROS production was determined with luminol-enhanced chemiluminescence. Activity of ADA was measured spectrophotometrically. Plasma dose-dependently amplified the ROS generation in fMLP-stimulated neutrophils. In parallel, incubation of neutrophils in plasma elevated the total ADA-activity approximately 10 times from 1.3 U/ml to 12 U/ml. Inhibition of ADA, or type IV phosphodiesterases, significantly lowered the plasma-mediated ROS production. Furthermore, the high-affinity adenosine A(1) receptor antagonists DPCPX and 8-phenyltheophylline markedly inhibited the plasma-induced respiratory burst in neutrophils, suggesting an A(1) receptor-mediated mechanism. This study suggests that plasma ADA amplifies the release of toxic oxygen radicals from neutrophils through a downregulation of the inhibitory adenosine/cAMP-system and an enhanced activation of the stimulatory adenosine A(1)-receptor. This mechanism has probably a crucial role in regulating neutrophil function and in the defence against microbial infections. However, a sustained neutrophil activation could also contribute to inflammatory disorders such as atherosclerosis. 2010 Elsevier GmbH. All rights reserved.

  15. Pathogen safety of plasma-derived products - Haemate P/Humate-P.

    Science.gov (United States)

    Gröner, A

    2008-11-01

    Plasma-derived factor VIII (FVIII) and von Willebrand Factor (VWF)/FVIII concentrates have been successfully used to treat haemophilia since the late 1960s. These products are derived from pools of plasma donations that may contain viral contaminants - including hepatitis B virus (HBV), hepatitis C virus (HCV) and human immunodeficiency virus (HIV) - and may therefore present a transmission risk to recipients. To ensure the safety of Haemate P/Humate-P, a plasma-derived VWF/FVIII concentrate, donors of plasma are carefully selected and all donations are screened for viral antigens (HBV), virus-specific antibodies (HIV-1/2, HCV) and genomic material [hepatitis A virus, HBV, HCV, HIV-1 and high titres of human parvovirus B19 (B19V)]. As a quality control measure, plasma pools for fractionation are only released for further processing when non-reactivity has been demonstrated in serological and genome amplification assays. The manufacturing process for plasma-derived products, especially the fundamental procedure of pasteurization, is effective in inactivating and/or removing a wide variety of viruses that may potentially be present despite the screening process. This has been demonstrated in virus validation studies using a range of different viruses. New emerging infectious agents, including prions, which potentially pose a threat to recipients of plasma derivatives, are also the subject of safety evaluations. The multiple precautionary measures that are inherent in the overall production process of Haemate P/Humate-P have resulted in an excellent safety record, documented during 25 years of clinical use, and will help to maintain the high safety margin in the future.

  16. Phototrophic pigment production with microalgae: biological constraints and opportunities.

    Science.gov (United States)

    Mulders, Kim J M; Lamers, Packo P; Martens, Dirk E; Wijffels, René H

    2014-04-01

    There is increasing interest in naturally produced colorants, and microalgae represent a bio-technologically interesting source due to their wide range of colored pigments, including chlorophylls (green), carotenoids (red, orange and yellow), and phycobiliproteins (red and blue). However, the concentration of these pigments, under optimal growth conditions, is often too low to make microalgal-based pigment production economically feasible. In some Chlorophyta (green algae), specific process conditions such as oversaturating light intensities or a high salt concentration induce the overproduction of secondary carotenoids (β-carotene in Dunaliella salina (Dunal) Teodoresco and astaxanthin in Haematococcus pluvialis (Flotow)). Overproduction of all other pigments (including lutein, fucoxanthin, and phycocyanin) requires modification in gene expression or enzyme activity, most likely combined with the creation of storage space outside of the photosystems. The success of such modification strategies depends on an adequate understanding of the metabolic pathways and the functional roles of all the pigments involved. In this review, the distribution of commercially interesting pigments across the most common microalgal groups, the roles of these pigments in vivo and their biosynthesis routes are reviewed, and constraints and opportunities for overproduction of both primary and secondary pigments are presented.

  17. Fermentative production of butanol: Perspectives on synthetic biology.

    Science.gov (United States)

    Nanda, Sonil; Golemi-Kotra, Dasantila; McDermott, John C; Dalai, Ajay K; Gökalp, Iskender; Kozinski, Janusz A

    2017-07-25

    Apprehensions relating to global warming, climate change, pollution, rising energy demands as well as fluctuating crude oil prices and supply are leading to a shift in global interest to find suitable alternatives to fossil fuels. This review aims to highlight the many different facets of butanol as an advanced next-generation transportation biofuel. Butanol has fuel properties almost on a par with gasoline, such as high energy content, low vapor pressure, non-hygroscopic nature, less volatility, flexible fuel blends and high octane number. The paper reviews some recent advances in acetone-butanol-ethanol fermentation with special emphasis on the primary challenges encountered in butanol fermentation, including butanol toxicity, solvent intolerance and bacteriophage contamination. The mechanisms for butanol recovery techniques have been covered along with their benefits and limitations. A comprehensive discussion of genetic and metabolic engineering of butanol-producing microorganisms is made for the prospective development of industrially-relevant strains that can overcome the technical challenges involved in efficient butanol production. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. An adapted F-test for homogeneity of variability in follow-on biological products.

    Science.gov (United States)

    Yang, Jun; Zhang, Nan; Chow, Shein-Chung; Chi, Eric

    2013-02-10

    In recent years, follow-on biological products (biosimilars) have received much attention from both the biotechnology industry and the regulatory agencies, especially after the passage of the 2010 healthcare reform bill. Unlike the traditional small-molecule drug products, the development of biological products is not only more complicated but also sensitive to small changes (both mean and variation) in procedure/environment during the manufacturing process because of some fundamental differences between drug products and biological products. A small change will have an impact on the quality of the product and consequently the treatment effect. Thus, in addition to the assessment of biosimilarity in average, it was suggested that biosimilarity in variability between biological products should be assessed. In this article, we propose an adapted F-test for homogeneity of variances to assess biosimilarity in variability. We study the performance and concordance of the proposed adapted F-test and compare it with probability-based method by extensive Monte Carlo simulations.

  19. Hard Photon production from unsaturated quark gluon plasma at two loop level

    CERN Document Server

    Dutta, D; Mohanty, A K; Kumar, K; Choudhury, R K

    2002-01-01

    The hard photon productions from bremsstrahlung and annihilation with scattering that arise at two loop level are estimated from a chemically non-equilibrated quark gluon plasma using the frame work of thermal field theory. Although, the rate of photon production is suppressed due to unsaturated phase space, the above suppression is relatively smaller than expected due to an additional collinear enhancement (arise due to decrease in thermal quark mass) as compared to it's equilibrium counterpart. Interestingly, unlike the one loop case, the reduction in the two loop processes are found to be independent of gluon chemical poential, but strongly depends on quark fugacity. It is also found that, since the phase space suppression is highest for annihilation with scattering, the photon production is entirely dominated by bremsstrahlung mechanism at all energies. This is to be contrasted with the case of the equilibrated plasma where annihilation with scattering dominates the photon production particularly at highe...

  20. Correlation of H/sup -/ production and the work function of a surface in a hydrogen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Wada, M.

    1983-03-01

    Surface-plasma negative hydrogen ion sources are being developed as possible parts for future neutral beam systems. In these ion sources, negative hydrogen ions (H/sup -/) are produced at low work function metal surfaces immersed in hydrogen plasmas. To investigate the correlation between the work function and the H/sup -/ production at the surface with a condition similar to the one in the actual plasma ion source, these two parameters were simultaneously measured in the hydrogen plasma environment.

  1. Strangeness production as a signal for quark-gluon plasma formation in high energy particle collisions

    Energy Technology Data Exchange (ETDEWEB)

    Redlich, K.

    1985-04-01

    Strangeness production in hot nuclear matter in the non-interacting gas approximation with an Usub(B)(1)xUsub(S)(1) internal symmetry group is discussed. It is argued that the stangeness abundancy ratio in the quark-gluon plasma as compared to the hadron gas strongly depends on under which thermodynamical circumstances it has been computed.

  2. Micro-scale Plasma Arc Gasification for Waste Treatment and Energy Production Project

    Science.gov (United States)

    Caraccio, Anne

    2015-01-01

    As NASA continues to develop technology for spaceflight beyond low earth orbit, we must develop the right systems for sustaining human life on a long duration or planetary mission. Plasma arc gasification (PAG) is an energy efficient mechanism of waste management for power generation and synthetic gas(syngas) production.

  3. Occurrence, pathways and implications of biological production of reactive oxygen species in natural waters

    Science.gov (United States)

    Zhang, T.; Hansel, C. M.; Voelker, B. M.; Lamborg, C. H.

    2014-12-01

    Reactive oxygen species (ROS), such as superoxide (O2-) and hydrogen peroxide (H2O2) play a critical role in the redox cycling of both toxic (e.g., Hg) and nutrient (e.g., Fe) metals. Despite the discovery of extracellular ROS production in various microbial cultures, including fungi, algae and bacteria, photo-dependent processes are generally considered as the predominant source of ROS in natural waters. Here we show that biological production of ROS is ubiquitous and occurs at a significant rate in freshwater and brackish water environments. Water samples were collected from three freshwater and one brackish water ponds in Cape Cod, Massachusetts, USA, periodically from 2012 to 2014. Production of O2- and H2O2 were measured in dark incubations of natural water using a chemiluminescent and a colorimetric probe, respectively. Rates of biological ROS production were obtained by comparing unfiltered with 0.2-μm filtered samples. The role of biological activity in ROS production was confirmed by the cessation of ROS production upon addition of formaldehyde. In surface water, production rates of O2- ranged from undetectable to 96.0 ± 30.0 nmol L-1 h-1, and production rates of H2O2 varied between 9.9 ± 1.3 nmol L-1 h-1 and 145.6 ± 11.2 nmol L-1 h-1. The maximum production rates of both ROS were observed in mid-summer 2013, which coincides with peak biological activity. ROS production in the water from aphotic zone was greater than in the water from photic zone. Thus, non-light dependent biological processes are likely the major contributors to ROS production in this system. Moreover, O2- production appeared to be enhanced by NADH and inhibited by proteinase-K, suggesting the possible involvement of NADH oxidoreductases in this process. The potential role of different microbial communities in ROS production, and the implications of biological ROS production for mercury speciation will also be discussed.

  4. A turning point for natural product discovery - ESF-EMBO research conference : synthetic biology of antibiotic production

    NARCIS (Netherlands)

    Takano, Eriko; Bovenberg, Roel A. L.; Breitling, Rainer

    2012-01-01

    Synthetic Biology is in a critical phase of its development: it has finally reached the point where it can move from proof-of-principle studies to real-world applications. Secondary metabolite biosynthesis, especially the discovery and production of antibiotics, is a particularly relevant target are

  5. A turning point for natural product discovery - ESF-EMBO research conference : synthetic biology of antibiotic production

    NARCIS (Netherlands)

    Takano, Eriko; Bovenberg, Roel A. L.; Breitling, Rainer

    Synthetic Biology is in a critical phase of its development: it has finally reached the point where it can move from proof-of-principle studies to real-world applications. Secondary metabolite biosynthesis, especially the discovery and production of antibiotics, is a particularly relevant target

  6. A nonlabeled method to evaluate cortisol production rate by modeling plasma CBG-free cortisol disposition

    OpenAIRE

    Picard-Hagen, Nicole; Gayrard-Troy, Véronique,; Alvinerie, Michel; Smeyers, Hélène; Ricou, Raphael; Bousquet-Mélou, Alain; Toutain, Pierre-Louis

    2001-01-01

    This study aimed to develop a nonlabeled method for the measurement of cortisol production rate to evaluate adrenal function. The cortisol production rate determination requires that of cortisol clearance, which is not a parameter but a variable resulting from the saturable binding of cortisol to corticosteroid-binding globulin (CBG). Our method is based on evaluation of the plasma clearance of the CBG-free cortisol fraction. This parameter was evaluated from a pharmacokinetic model of total ...

  7. Plasma tissue inhibitor of metalloproteinases-1 as a biological marker? Pre-analytical considerations

    DEFF Research Database (Denmark)

    Lomholt, Anne Fog; Frederiksen, Camilla; Christensen, Ib Jarle;

    2007-01-01

    Tissue Inhibitor of Metalloproteinases-1 (TIMP-1) may be a valuable biological marker in Colorectal Cancer (CRC). However, prospective validation of TIMP-1 as a biological marker should include a series of pre-analytical considerations. TIMP-1 is stored in platelets, which may degranulate during ...

  8. Biological Function of Plasma Kallikrein in Mammary Gland Stromal Development and Tumor Metastasis

    Science.gov (United States)

    2008-03-01

    L.A. Dent. 2003. Interleukin-5 transgene expression and eosinophilia are associated with retarded mammary gland development in mice. Biology of...and L.A. Dent. 2003. Interleukin-5 transgene expression and eosinophilia are associated with retarded mammary gland development in mice. Biology of

  9. Isolation of biologically active and morphologically intact exosomes from plasma of patients with cancer

    Directory of Open Access Journals (Sweden)

    Chang-Sook Hong

    2016-03-01

    Full Text Available Objective: Isolation from human plasma of exosomes that retain functional and morphological integrity for probing their protein, lipid and nucleic acid content is a priority for the future use of exosomes as biomarkers. A method that meets these criteria and can be scaled up for patient monitoring is thus desirable. Methods: Plasma specimens (1 mL of patients with acute myeloid leukaemia (AML or a head and neck squamous cell carcinoma (HNSCC were differentially centrifuged, ultrafiltered and fractionated by size exclusion chromatography in small disposable columns (mini-SEC. Exosomes were eluted in phosphate-buffered saline and were evaluated by qNano for particle size and counts, morphology by transmission electron microscopy, protein content, molecular profiles by western blots, and for ability to modify functions of immune cells. Results: Exosomes eluting in fractions #3–5 had a diameter ranging from 50 to 200 nm by qNano, with the fraction #4 containing the bulk of clean, unaggregated exosomes. The exosome elution profiles remained constant for repeated runs of the same plasma. Larger plasma volumes could be fractionated running multiple mini-SEC columns in parallel. Particle concentrations per millilitre of plasma in #4 fractions of AML and HNSCC were comparable and were higher (p<0.003 than those in normal controls. Isolated AML exosomes co-incubated with normal human NK cells inhibited NKG2D expression levels (p<0.004, and HNSCC exosomes suppressed activation (p<0.01 and proliferation of activated T lymphocytes (p<0.03. Conclusions: Mini-SEC allows for simple and reproducible isolation from human plasma of exosomes retaining structural integrity and functional activity. It enables molecular/functional analysis of the exosome content in serial specimens of human plasma for clinical applications.

  10. Entropy production for an interacting quark-gluon plasma

    CERN Document Server

    Mattiello, Stefano

    2011-01-01

    We investigate the entropy production within dissipative hydrodynamics in the Israel-Stewart (IS) and Navier-Stokes theory (NS) for relativistic heavy ion physics applications. In particular we focus on the initial condition in a 0+1D Bjorken scenario, appropriate for the early longitudinal expansion stage of the collision. Going beyond the standard simplification of a massless ideal gas we consider a realistic equation of state consistently derived within a virial expansion. The EoS used is well in line with recent three-flavor QCD lattice data for the pressure, speed of sound, and interaction measure at nonzero temperature and vanishing chemical potential ($\\mu_{\\rm q} = 0$). The shear viscosity has been consistently calculated within this formalism using a kinetic approach in the ultra-relativistic regime with an explicit and systematic evaluation of the transport cross section as function of temperature. We investigate the influence of the viscosity and the initial condition, i.e. formation time, initial ...

  11. Biological waste by-production costs in forest management and possibilities for their reduction

    Directory of Open Access Journals (Sweden)

    Jiří Kadlec

    2004-01-01

    Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

  12. Recent progress in synthetic biology for microbial production of C3-C10 alcohols

    Directory of Open Access Journals (Sweden)

    Edna N. Lamsen

    2012-06-01

    Full Text Available The growing need to address current energy and environmental problems has sparked an interest in developing improved biological methods to produce liquid fuels from renewable sources. While microbial ethanol production is well established, higher chain alcohols possess chemical properties that are more similar to gasoline. Unfortunately, these alcohols (except 1-butanol are not produced efficiently in natural microorganisms, and thus economical production in industrial volumes remains a challenge. Synthetic biology, however, offers additional tools to engineer synthetic pathways in user-friendly hosts to help increase titers and productivity of these advanced biofuels. This review concentrates on recent developments in synthetic biology to produce higher-chain alcohols as viable renewable replacements for traditional fuel.

  13. Nutrient availability limits biological production in Arctic sea ice melt ponds

    DEFF Research Database (Denmark)

    Sørensen, Heidi Louise; Thamdrup, Bo; Jeppesen, Erik

    2017-01-01

    Every spring and summer melt ponds form at the surface of polar sea ice and become habitats where biological production may take place. Previous studies report a large variability in the productivity, but the causes are unknown. We investigated if nutrients limit the productivity in these first......-year ice melt ponds by adding nutrients to three enclosures ([1] PO4 3−, [2] NO3 −, and [3] PO4 3− and NO3 −) and one natural melt pond (PO4 3− and NO3−), while one enclosure and one natural melt pond acted as controls. After 7–13 days, Chl a concentrations and cumulative primary production were between...... nutrient limitation in melt ponds. We also document that the addition of nutrients, although at relative high concentrations, can stimulate biological productivity at several trophic levels. Given the projected increase in first-year ice, increased melt pond coverage during the Arctic spring and potential...

  14. 100% N2 atmospheric-pressure microwave-line-plasma production with a modified waveguide structure

    Science.gov (United States)

    Suzuki, Haruka; Tamura, Yuto; Itoh, Hitoshi; Sekine, Makoto; Hori, Masaru; Toyoda, Hirotaka

    2016-09-01

    Large-scale atmospheric pressure (AP) plasmas have been given much attention because of its high cost benefit and a variety of possibilities for industrial applications. Microwave discharge plasma using slot antenna is attractive due to its ability of high-density and stable plasma production, and we have developed a long-scale AP microwave plasma (AP microwave line plasma: AP-MLP) source using loop-structured waveguide and travelling wave and have reported spatially-uniform AP-MLP of 40 cm in length using Ar or He gas discharge. However, rare gas discharge is not always suitable for industrial applications because usage of large volume rare gas degrades the AP cost benefit. Furthermore, many industrial applications require chemically-reactive species and the AP-MLP using molecular gas will drastically increase the applications of the AP-MLP. In this study, we demonstrate 100% N2 discharge of the AP-MLP with a modified waveguide structure. Cross-sectional structure of the waveguide is improved to enhance the microwave electric field in the slot. 100% N2 plasma of 15 cm-long is successfully produced using CW microwave power of 2 kW. Low gas temperature of 1000 K is confirmed by optical emission spectroscopy, suggesting applications of the AP-MLP to low temperature processes. Part of this work is supported by JSPS KAKENHI Grant Number 25286079.

  15. Plasma fibrinogen degradation products in betel nut chewers - with and without oral submucous fibrosis

    Directory of Open Access Journals (Sweden)

    G Kiran

    2013-01-01

    Full Text Available Context: Oral submucous fibrosis (OSMF has a multifactorial etiology. Recent studies have shown that there is an increased level of fibrinogen degradation products (FDP in plasma of OSMF patients suggesting its possible role in etiopathogenesis of OSMF. Aims: To detect the presence of FDP in the plasma of betel nut chewers with and without OSMF and in normal subjects without any habits, to correlate these levels with respect to the clinical and histological grading of OSMF and whether it can be used as a nonsurgical diagnostic aid in detection of suspected OSMF cases. Materials and Methods: Study comprised of 35 cases of betel nut chewers with OSMF, 10 patients with betel nut chewing habit but having apparently normal oral mucosa, and 10 normal patients without any habits. The patients were evaluated for plasma FDP levels. Results: All the betel nut chewers with OSMF showed the presence of plasma FDP. However, controls and subjects with habit, but without OSMF did not show FDP in the plasma. Spearman′s rank correlation was used to find the association between the clinical and histological grades and it was not statistically significant (P = 0.910 and the correlation being 0.020. Conclusion: Since only those patients with OSMF have showed the presence of FDP in plasma, we suggest that our test can be utilized as a nonsurgical diagnostic aid in suspected OSMF patients.

  16. Products of DNA, protein and lipid oxidative damage in relation to vitamin C plasma concentration.

    Science.gov (United States)

    Krajcovicová-Kudlácková, M; Dusinská, M; Valachovicová, M; Blazícek, P; Pauková, V

    2006-01-01

    Oxidative stress plays an important role in the pathogenesis of numerous chronic age-related free radical-induced diseases. Improved antioxidant status minimizes oxidative damage to DNA, proteins, lipids and other biomolecules. Diet-derived antioxidants such as vitamin C, vitamin E, carotenoids and related plant pigments are important in antioxidative defense and maintaining health. The results of long-term epidemiological and clinical studies suggest that protective vitamin C plasma concentration for minimum risk of free radical disease is higher than 50 micromol/l. Products of oxidative damage to DNA (DNA strand breaks with oxidized purines and pyrimidines), proteins (carbonyls) and lipids (conjugated dienes of fatty acids, malondialdehyde) were estimated in a group of apparently healthy adult non-smoking population in dependence on different vitamin C plasma concentrations. Under conditions of protective plasma vitamin C concentrations (>50 micromol/l) significantly lower values of DNA, protein and lipid oxidative damage were found in comparison with the vitamin C-deficient group (fruit and vegetable consumption (leading to higher vitamin C intake and higher vitamin C plasma concentrations) on oxidation of DNA, proteins and lipids is also expressed by an inverse significant correlation between plasma vitamin C and products of oxidative damage. The results suggest an important role of higher and frequent consumption of protective food (fruit, vegetables, vegetable oils, nuts, seeds and cereal grains) in prevention of free radical disease.

  17. Inactivation of Zika virus by solvent/detergent treatment of human plasma and other plasma-derived products and pasteurization of human serum albumin.

    Science.gov (United States)

    Kühnel, Denis; Müller, Sebastian; Pichotta, Alexander; Radomski, Kai Uwe; Volk, Andreas; Schmidt, Torben

    2017-03-01

    In 2016 the World Health Organization declared the mosquito-borne Zika virus (ZIKV) a "public health emergency of international concern." ZIKV is a blood-borne pathogen, which therefore causes concerns regarding the safety of human plasma-derived products due to potential contamination of the blood supply. This study investigated the effectiveness of viral inactivation steps used during the routine manufacturing of various plasma-derived products to reduce ZIKV infectivity. Human plasma and intermediates from the production of various plasma-derived products were spiked with ZIKV and subjected to virus inactivation using the identical techniques (either solvent/detergent [S/D] treatment or pasteurization) and conditions used for the actual production of the respective products. Samples were taken and the viral loads measured before and after inactivation. After S/D treatment of spiked intermediates of the plasma-derived products Octaplas(LG), Octagam, and Octanate, the viral loads were below the limit of detection in all cases. The mean log reduction factor (LRF) was at least 6.78 log for Octaplas(LG), at least 7.00 log for Octagam, and at least 6.18 log for Octanate after 60, 240, and 480 minutes of S/D treatment, respectively. For 25% human serum albumin (HSA), the mean LRF for ZIKV was at least 7.48 log after pasteurization at 60°C for 120 minutes. These results demonstrate that the commonly used virus inactivation processes utilized during the production of human plasma and plasma-derived products, namely, S/D treatment or pasteurization, are effective for inactivation of ZIKV. © 2016 The Authors Transfusion published by Wiley Periodicals, Inc. on behalf of AABB.

  18. Bioinformatics for the synthetic biology of natural products: integrating across the Design–Build–Test cycle

    Science.gov (United States)

    Currin, Andrew; Jervis, Adrian J.; Rattray, Nicholas J. W.; Swainston, Neil; Yan, Cunyu; Breitling, Rainer

    2016-01-01

    Covering: 2000 to 2016 Progress in synthetic biology is enabled by powerful bioinformatics tools allowing the integration of the design, build and test stages of the biological engineering cycle. In this review we illustrate how this integration can be achieved, with a particular focus on natural products discovery and production. Bioinformatics tools for the DESIGN and BUILD stages include tools for the selection, synthesis, assembly and optimization of parts (enzymes and regulatory elements), devices (pathways) and systems (chassis). TEST tools include those for screening, identification and quantification of metabolites for rapid prototyping. The main advantages and limitations of these tools as well as their interoperability capabilities are highlighted. PMID:27185383

  19. Enhanced photon emission and pair production in laser-irradiated plasmas

    Science.gov (United States)

    Wan, Feng; Lv, Chong; Jia, Moran; Xie, Baisong

    2017-07-01

    Enhanced photon emission and pair production due to heavy ion mass in the interaction of an ultraintense laser with overdense plasmas is explored by particle-in-cell simulation. It is found that plasmas with heavier ion mass can excite a higher and broader electrostatic field, which causes the enhancement of backward photon emission. The pair yields are then enhanced due to the increase of backwards photons colliding with the incoming laser pulse. By examining the density evolution and angle distribution of each particle species, the origin of pair yield enhancement is clarified.

  20. Photon production from quark gluon plasma at finite baryon density

    Indian Academy of Sciences (India)

    D Dutta; S V S Sastry; A K Mohanty; K Kumar; R K Choudhury

    2003-05-01

    The photon yield from a baryon-rich quark gluon plasma (QGP) at SPS energy has been estimated. In the QGP phase, rate of photon production is evaluated up to two-loop level. In the hadron phase, dominant contribution from , , mesons has been considered. The evolution of the plasma has been studied with appropriate equation of state in both QGP and hadron phase for a baryon-rich system. At SPS energy, the total photon yield is found to increase marginally in the presence of baryon density.

  1. Influence of organic fertilizer Biopro- ferm on ecological, biological and agrochemical properties of soil and winter wheat productivity

    OpenAIRE

    V. Gnydjuk

    2012-01-01

    Results of research on the effect of organic fertilizer Bioproferm obtained by biological fermentation of organic wastes of livestock and poultry facilities, environmental, biological and agrochemical soil properties and productivity of winter wheat

  2. Perioperative plasma concentrations of stable nitric oxide products are predictive of cognitive dysfunction after laparoscopic cholecystectomy.

    LENUS (Irish Health Repository)

    Iohom, G

    2012-02-03

    In this study our objectives were to determine the incidence of postoperative cognitive dysfunction (POCD) after laparoscopic cholecystectomy under sevoflurane anesthesia in patients aged >40 and <85 yr and to examine the associations between plasma concentrations of i) S-100beta protein and ii) stable nitric oxide (NO) products and POCD in this clinical setting. Neuropsychological tests were performed on 42 ASA physical status I-II patients the day before, and 4 days and 6 wk after surgery. Patient spouses (n = 13) were studied as controls. Cognitive dysfunction was defined as deficit in one or more cognitive domain(s). Serial measurements of serum concentrations of S-100beta protein and plasma concentrations of stable NO products (nitrate\\/nitrite, NOx) were performed perioperatively. Four days after surgery, new cognitive deficit was present in 16 (40%) patients and in 1 (7%) control subject (P = 0.01). Six weeks postoperatively, new cognitive deficit was present in 21 (53%) patients and 3 (23%) control subjects (P = 0.03). Compared with the "no deficit" group, patients who demonstrated a new cognitive deficit 4 days postoperatively had larger plasma NOx at each perioperative time point (P < 0.05 for each time point). Serum S-100beta protein concentrations were similar in the 2 groups. In conclusion, preoperative (and postoperative) plasma concentrations of stable NO products (but not S-100beta) are associated with early POCD. The former represents a potential biochemical predictor of POCD.

  3. Plasma suPAR as a prognostic biological marker for ICU mortality in ARDS patients

    NARCIS (Netherlands)

    Geboers, Diederik G P J; de Beer, Friso M.; Boer, Anita M Tuip de; van der Poll, Tom; Horn, Janneke; Cremer, Olaf L.; Bonten, Marc J M; Ong, David S Y; Schultz, Marcus J.; Bos, Lieuwe D J

    2015-01-01

    Purpose: We investigated the prognostic value of plasma soluble urokinase plasminogen activator receptor (suPAR) on day 1 in patients with the acute respiratory distress syndrome (ARDS) for intensive care unit (ICU) mortality and compared it with established disease severity scores on day 1. Methods

  4. The Use of Alternative Raw Material in Production of Pastry Products as a Progressive Direction in Creating the Products of High Biological Value

    Directory of Open Access Journals (Sweden)

    Janа Bachinska

    2017-02-01

    Full Text Available This paper examines the impact of the use of alternative vegetable raw materials in the manufacture of pastry products with high biological value; it presents the results of evaluation of commodity of the developed products and compares them with the main samples presented in Kharkiv trade network. The feasibility of using a mixture of fiber and pumpkin seeds in the technology of pastry production to extend the range of confectionery products of high biological value and products with reduced calories has been proved. Adding the mixture of fiber and pumpkin seeds to biscuits and cakes positively affected the chemical composition of the ready-made product, saturating it with useful and necessary to human body mineral elements, vitamins, dietary fiber.

  5. New opportunities by synthetic biology for biopharmaceutical production in Pichia pastoris

    Science.gov (United States)

    Vogl, Thomas; Hartner, Franz S; Glieder, Anton

    2013-01-01

    Biopharmaceuticals are an integral part of modern medicine and pharmacy. Both, the development and the biotechnological production of biopharmaceuticals are highly cost-intensive and require suitable expression systems. In this review we discuss established and emerging tools for reengineering the methylotrophic yeast Pichia pastoris for biopharmaceutical production. Recent advancements of this industrial expression system through synthetic biology include synthetic promoters to avoid methanol induction and to fine-tune protein production. New platform strains and molecular cloning tools as well as in vivo glycoengineering to produce humanized glycoforms have made P. pastoris an important host for biopharmaceutical production. PMID:23522654

  6. Studies on the biological effects of ozone: 8. Effects on the total antioxidant status and on interleukin-8 production

    Directory of Open Access Journals (Sweden)

    V. Bocci

    1998-01-01

    Full Text Available Ozone (O3 is a controversial gas because, owing to its potent oxidant properties, it exerts damaging effects on the respiratory tract and yet it has been used for four decades as a therapy. While the disinfectant activity of O3 is understandable, it is less clear how other biological effects can be elicited in human blood with practically no toxicity. On the other hand plasma and cells are endowed with a powerful antioxidant system so that a fairly wide range of O3 concentrations between 40 and 80μ g/ml per gram of blood (˜0.83-1.66 mM are effective but not deleterious. After blood ozonation total antioxidant status (TAS and plasma protein thiol groups (PTG decrease by 20% and 25%, respectively, while thiobarbituric acid reactive substances (TBARS increases up to fivefold. The increase of haemolysis is negligible suggesting that the erythrocyte membrane is spared at the expense of other sacrificial substrates. While there is a clear relationship between the ozone dose and IL-8 levels, we have noticed that high TAS and PTG values inhibit the cytokine production. This is in line with the current idea that hydrogen peroxide, as a byproduct of O3 decomposition, acts as a messenger for the cytokine induction.

  7. Electromagnetic ion-cyclotron instability in a dusty plasma with product-bi-kappa distributions for the plasma particles

    CERN Document Server

    Santos, Michel S dos; Gaelzer, Rudi

    2016-01-01

    We study the dispersion relation for parallel propagating ion-cyclotron (IC) waves in a dusty plasma, considering that ions and electrons may be represented by product-bi-kappa (PBK) velocity distributions. The results obtained by numerical solution of the dispersion relation, in a case with isotropic Maxwellian distributions for electrons and PBK distribution for ions, show the occurrence of the electromagnetic ion-cyclotron instability (EMIC), and show that the decrease in the kappa indexes of the PBK ion distribution leads to significant increase of the instability, in magnitude of the growth rates and in range in wavenumber space. On the other hand, for anisotropic Maxwellian distribution for ions and PBK distribution for electrons, the decrease of the kappa index in the PBK electron distribution contributes to reduce the EMIC instability, but the reduction effect is much less pronounced than that obtained with the same combination of distributions in the case of the ion-firehose instability, shown in a r...

  8. Biological Constraints in Tomato Production in the Western Highlands of Cameroon

    Directory of Open Access Journals (Sweden)

    Fontem, DA.

    1999-01-01

    Full Text Available Tomato (Lycopersicon esculentum production is handicapped by damage due to pests and pathogens. Farmers' fields in the western highlands of Cameroon were surveyed during 1993 to 1996 to identify biological constraints in production. Diseases and insect pests are the most important biological limitations in tomato production. Late blight caused by Phytophthora infestans and early blight caused by Alternaria solani are the most severe diseases, while the melon fruitfly (Dacus cucurbitae is the most prevalent insect pest. Yield losses due to pest damage are high and reach 100 % when the crop is not treated in the wet season. Pest-resistant varieties are not available to farmers. Consequently, growers practise intensive pesticidal spray programmes to limit losses caused by pests and diseases. Results indicate the necessity for the adoption of integrated pest management strategies in tomato production in Cameroon.

  9. The Role of Synthetic Biology in the Design of Microbial Cell Factories for Biofuel Production

    Science.gov (United States)

    Colin, Verónica Leticia; Rodríguez, Analía; Cristóbal, Héctor Antonio

    2011-01-01

    Insecurity in the supply of fossil fuels, volatile fuel prices, and major concerns regarding climate change have sparked renewed interest in the production of fuels from renewable resources. Because of this, the use of biodiesel has grown dramatically during the last few years and is expected to increase even further in the future. Biodiesel production through the use of microbial systems has marked a turning point in the field of biofuels since it is emerging as an attractive alternative to conventional technology. Recent progress in synthetic biology has accelerated the ability to analyze, construct, and/or redesign microbial metabolic pathways with unprecedented precision, in order to permit biofuel production that is amenable to industrial applications. The review presented here focuses specifically on the role of synthetic biology in the design of microbial cell factories for efficient production of biodiesel. PMID:22028591

  10. A consilience model to describe N2O production during biological N removal

    DEFF Research Database (Denmark)

    Domingo Felez, Carlos; Smets, Barth F.

    2016-01-01

    (NO) and N2O dynamics have been proposed. Here, a first comprehensive model that considers all relevant NO and N2O production and consumption mechanisms is proposed. The model describes autotrophic NO production by ammonia oxidizing bacteria associated with ammonia oxidation and with nitrite reduction......Nitrous oxide (N2O), a potent greenhouse gas, is produced during biological nitrogen conversion in wastewater treatment operations. Complex mechanisms underlie N2O production by autotrophic and heterotrophic organisms, which continue to be unravelled. Mathematical models that describe nitric oxide......, followed by NO reduction to N2O. It also considers NO and N2O as intermediates in heterotrophic denitrification in a 4-step model. Three biological NO and N2O production pathways are accounted for, improving the capabilities of existing models while not increasing their complexity. Abiotic contributions...

  11. Biologic

    CERN Document Server

    Kauffman, L H

    2002-01-01

    In this paper we explore the boundary between biology and the study of formal systems (logic). In the end, we arrive at a summary formalism, a chapter in "boundary mathematics" where there are not only containers but also extainers ><, entities open to interaction and distinguishing the space that they are not. The boundary algebra of containers and extainers is to biologic what boolean algebra is to classical logic. We show how this formalism encompasses significant parts of the logic of DNA replication, the Dirac formalism for quantum mechanics, formalisms for protein folding and the basic structure of the Temperley Lieb algebra at the foundations of topological invariants of knots and links.

  12. Optimization simulation of thermal plasma reactor for acetylene production from coal

    Energy Technology Data Exchange (ETDEWEB)

    Yang, J.; Yang, Y.; Bao, W.; Zhang, Y.; Kie, K. [Taiyuan University of Technology, Taiyuan (China)

    2007-07-01

    A heat-flow field mathematical model based on the computational; fluid dynamics (CFD) technique was developed for a thermal plasma reactor in order to optimize the reactor structure and operation conditions for the direct production of acetylene from coal. The simulation of the thermal plasma reactor with single inlet, double inlet and double inlet with protective gas was given; simulations of the heat-flow coupling field were carried out by using the method of Incomplete Cholesky Conjugate Gradient (ICCG). The optimization simulation results show that the load of the thermal plasma reactor with double inlet is increased, and the reactor wall surface coke is depressed. The anticoking effect is best under the gas flow rate of 50 m/s. 4 refs., 4 figs.

  13. 21 CFR 201.56 - Requirements on content and format of labeling for human prescription drug and biological products.

    Science.gov (United States)

    2010-04-01

    ... human prescription drug and biological products. 201.56 Section 201.56 Food and Drugs FOOD AND DRUG... human prescription drug and biological products. (a) General requirements. Prescription drug labeling... requirements in §§ 201.56(d) and 201.57. (1) The following categories of prescription drug products are...

  14. New approaches to estimation of peat deposits for production of biologically active compounds

    Science.gov (United States)

    Stepchenko, L. M.; Yurchenko, V. I.; Krasnik, V. G.; Syedykh, N. J.

    2009-04-01

    It is known, that biologically active preparations from peat increase animals productivity as well as resistance against stress-factors and have adaptogeneous, antioxidant, immunomodulative properties. Optymal choice of peat deposits for the production of biologically active preparations supposes the detailed comparative analysis of peat properties from different deposits. For this the cadastre of peat of Ukraine is developed in the humic substances laboratory named after prof. Khristeva L.A. (Dnipropetrovsk Agrarian University, Ukraine). It based on the research of its physical and chemical properties, toxicity and biological activity, and called Biocadastre. The Biocadastre is based on the set of parameters, including the descriptions of physical and chemical properties (active acidity, degree of decomposition, botanical composition etc.), toxicity estimation (by parabyotyc, infusorial, inhibitor and other tests), biological activity indexes (growth-promoting, antioxidative, adaptogeneous, immunomodulative antistress and other actions). The blocks of Biocadastre indexes are differentiated, taking into account their use for creation the preparations for vegetable, animals and microorganisms. The Biocadastre will allow to choose the peat deposits, most suitable for the production of different biologically active preparations, both wide directed and narrow spectrum of action, depending on application fields (medicine, agriculture, veterinary medicine, microbiological industry, balneology, cosmetology).

  15. Development and evaluation of magnesium oxide-based ceramics for chamber parts in mass-production plasma etching equipment

    Science.gov (United States)

    Kasashima, Yuji; Tsutsumi, Kota; Mitomi, Shinzo; Uesugi, Fumihiko

    2017-06-01

    In mass-production plasma etching equipment, the corrosion of ceramic chamber parts reduces the production yield of LSI and overall equipment effectiveness (OEE) owing to contamination, short useful life, and particle generation. Novel ceramics that can improve the production yield and OEE are highly required. We develop magnesium oxide (MgO)-based ceramics and evaluate them under mass-production plasma etching conditions. The results of this study indicate that the developed MgO-based ceramics with high mechanical properties and low electric resistivity have a higher resistance to corrosion in plasma etching using CF4 gas than Si and conventional ceramic materials such as aluminum oxide and yttrium oxide.

  16. The possible influence of micro-organisms and putrefaction in the production of GHB in post-mortem biological fluid.

    Science.gov (United States)

    Elliott, Simon; Lowe, Pauline; Symonds, Amanda

    2004-01-28

    In recent years, the post-mortem production of the drug of abuse gamma-hydroxybutyric acid (GHB) in biological fluids (e.g. blood and urine) has caused various interpretative problems for toxicologists. Previously, other researchers have shown certain microbial species (Pseudomonas spp. and Clostridium aminobutyricum) possess the necessary enzymes to convert GABA to GHB. A preliminary investigation involving putrefied post-mortem blood indicated there was no observed relationship between "endogenous" GHB concentrations and concentrations of common putrefactive markers (tryptamine and phenyl-2-ethylamine). Microbiological analysis identified the presence of various micro-organisms: Clostridia spp., Escherichia coli, Proteus vulgaris, Enterococcus faecalis and Aeromonoas spp. Equine plasma, human blood and urine samples were inoculated with these and an additional micro-organism (Pseudomonas aeruginosa) and incubated at 22 degrees C for 1 month. Following comparison with control samples and pre-inoculation concentrations, the data indicated an apparent production of GHB in unpreserved P. aeruginosa inoculated blood (2.3 mg/l). All other fluoride-preserved and unpreserved samples (including controls) had GHB concentrations post-mortem GHB concentrations, this paper proposes a potential microbial production of GHB with time.

  17. Application of synthetic biology for production of chemicals in yeast Saccharomyces cerevisiae

    DEFF Research Database (Denmark)

    Borodina, Irina; Li, Mingji

    2015-01-01

    Synthetic biology and metabolic engineering enable generation of novel cell factories that efficiently convert renewable feedstocks into biofuels, bulk, and fine chemicals, thus creating the basis for biosustainable economy independent on fossil resources. While over a hundred proof...... biology has the potential to bring down this cost by improving our ability to predictably engineer biological systems. This review highlights synthetic biology applications for design, assembly, and optimization of non-native biochemical pathways in baker's yeast Saccharomyces cerevisiae. We describe......-of-concept chemicals have been made in yeast, only a very small fraction of those has reached commercial-scale production so far. The limiting factor is the high research cost associated with the development of a robust cell factory that can produce the desired chemical at high titer, rate, and yield. Synthetic...

  18. First Production of C60 Nanoparticle Plasma Jet for Study of Disruption Mitigation for ITER

    Science.gov (United States)

    Bogatu, I. N.; Thompson, J. R.; Galkin, S. A.; Kim, J. S.; Brockington, S.; Case, A.; Messer, S. J.; Witherspoon, F. D.

    2012-10-01

    Unique fast response and large mass-velocity delivery of nanoparticle plasma jets (NPPJs) provide a novel application for ITER disruption mitigation, runaway electrons diagnostics and deep fueling. NPPJs carry a much larger mass than usual gases. An electromagnetic plasma gun provides a very high injection velocity (many km/s). NPPJ has much higher ram pressure than any standard gas injection method and penetrates the tokamak confining magnetic field. Assimilation is enhanced due to the NP large surface-to-volume ratio. Radially expanding NPPJs help achieving toroidal uniformity of radiation power. FAR-TECH's NPPJ system was successfully tested: a coaxial plasma gun prototype (˜35 cm length, 96 kJ energy) using a solid state TiH2/C60 pulsed power cartridge injector produced a hyper-velocity (>4 km/s), high-density (>10^23 m-3), C60 plasma jet in ˜0.5 ms, with ˜1-2 ms overall response-delivery time. We present the TiH2/C60 cartridge injector output characterization (˜180 mg of sublimated C60 gas) and first production results of a high momentum C60 plasma jet (˜0.6 g.km/s).

  19. 76 FR 79203 - Prospective Grant of Exclusive License: Veterinary Biological Products for Swine Influenza Vaccines

    Science.gov (United States)

    2011-12-21

    ... Biological Products for Swine Influenza Vaccines AGENCY: National Institutes of Health, Public Health Service... methods of use as Veterinary Influenza Vaccines. Sustained outbreaks of highly pathogenic influenza in animals increase the risk of reassortment and adaption to humans. This technology describes DNA vaccines...

  20. 78 FR 32668 - Draft Guidance for Industry: Changes to an Approved Application: Biological Products: Human Blood...

    Science.gov (United States)

    2013-05-31

    ...The Food and Drug Administration (FDA) is announcing the availability of a draft document entitled ``Guidance for Industry: Changes to an Approved Application: Biological Products: Human Blood and Blood Components Intended for Transfusion or for Further Manufacture'' dated June 2013. The draft guidance document provides manufacturers of licensed Whole Blood and blood components intended for......

  1. Process for the continuous biological production of lipids, hydrocarbons or mixtures thereof

    NARCIS (Netherlands)

    Van der Wielen, L.A.M.; Heijnen, J.J.

    2010-01-01

    The present invention is directed to a process for the continuous biological production of lipids, hydrocarbons, hydrocarbon like material or mixtures thereof by conversion of a suitable substrate using micro-organisms, in which process the said substrate is continuously, anaerobically fermented to

  2. Do biological medicinal products pose a risk to the environment?: a current view on ecopharmacovigilance.

    Science.gov (United States)

    Kühler, Thomas C; Andersson, Mikael; Carlin, Gunnar; Johnsson, Ann; Akerblom, Lennart

    2009-01-01

    The occurrence of active pharmaceutical substances in the environment is of growing concern. The vast majority of the compounds in question are of low molecular weight, intended for oral use and designed to tolerate, for example, the digestive enzymes in the upper alimentary tract, the harsh milieus found in the acidic stomach, or the microbe rich intestine. Accordingly, these xenobiotic compounds may, due to their inherent biological activity, constitute a risk to the environment. Biological medicinal products, for example recombinant human insulin or monoclonal antibodies, however, are different. They are primarily made up of oligomers or polymers of amino acids, sugars or nucleotides and are thus readily metabolized. They are therefore generally not considered to pose any risk to the environment. Certain classes of biological medicinal products, however, are associated with specific safety issues. Genetically modified organisms as vectors in vaccines or in gene therapy products have attracted much attention in this regard. Issues include the degree of attenuation of the live recombinant vaccine, replication restrictions of the vaccine vector, alteration of the host and tissue tropism of the vector, the possibility of reversion to virulence, and risk to the ecosystem. In this review we discuss the fate and the potential environmental impact of biological medicinal products following clinical use from an ecopharmacovigilance point of view, and review relevant policy documents and regulatory statements.

  3. Microwave-ultrasound combined reactor suitable for atmospheric sample preparation procedure of biological and chemical products

    NARCIS (Netherlands)

    Lagha, A.; Chemat, S.; Bartels, P.V.; Chemat, F.

    1999-01-01

    A compact apparatus in which a specific position can be irradiated by microwaves (MW) and ultrasound (US) simultaneously has been developed. The MW-US reactor has been designed for atmospheric pressure digestion and dissolution of biological and chemical products. The reactor can treat a range of th

  4. Dilute-acid pretreatment of barley straw for biological hydrogen production using Caldicellulosiruptor saccharolyticus

    NARCIS (Netherlands)

    Panagiotopoulos, I.A.; Bakker, R.R.C.; Vrije, de G.J.; Claassen, P.A.M.; Koukios, E.G.

    2012-01-01

    The main objective of this study was to use the fermentability test to investigate the feasibility of applying various dilute acids in the pretreatment of barley straw for biological hydrogen production. At a fixed acid loading of 1% (w/w dry matter) 28-32% of barley straw was converted to soluble m

  5. Biological control of Alternaria radicina in seed production of carrots with Ulocladium atrum

    NARCIS (Netherlands)

    Köhl, J.; Langerak, C.J.; Meekes, E.T.M.; Molhoek, W.M.L.

    2004-01-01

    Black rot of carrots is caused by seed-borne Alternaria radicina. Biological control of seed infestation by treatments applied to plants in flower during seed production with the fungal antagonist Ulocladium atrum was investigated in laboratory and field experiments resulting in a reduction of seed

  6. Biological productivity and potential resources of the exclusive economic zone (EEZ) of India

    Digital Repository Service at National Institute of Oceanography (India)

    Goswami, S.C.

    An assessment of the biological production and the potential fishery resources has been made based on the data collected over a period of 15 years (1976-1991). The entire Exclusive Economic Zone (EEZ), measuring 2.02 million km sup(2) was divided...

  7. [Special considerations for the regulation of biological medicinal products in individualised medicine. More than stratified medicine].

    Science.gov (United States)

    Müller-Berghaus, J; Volkers, P; Scherer, J; Cichutek, K

    2013-11-01

    The term individualised medicine, also called personalised medicine, is commonly used as an equivalent to stratified medicine. However, this is erroneous since quite often it is forgotten that especially biological medicinal products have other aspects of individualization that go beyond mere stratification. The principles of stratified medicine have been applied for biological medicinal products for many years. A historical example is diphtheria antitoxin made from horse serum, while current examples are transfusion of red blood cells and the administration of factor VIII in haemophilia A. The stratifying aspects of these medicinal products are given by the following considerations: diphtheria antitoxin is only administered after a diagnosis of diphtheria and not in other forms of tonsillitis, red blood cells should only be transfused once blood group compatibility as been established and factor VIII replacement is only administered in haemophilia A as opposed to other acquired or hereditary disease of the coagulation system. The peculiarities of biological medicinal products, in particular the inherent variability of the drug, are especially important for autologous cellular medicinal products. In addition to the expected variability of the biological source material there is interindividual variability of patients as cell donors, which make definition of specifications and determination of criteria for pharmaceutical quality and potency tests difficult. Therapy with modified autologous cells, a common and important application of advanced therapy medicinal products, is exemplary for the special considerations that must be made when evaluating pharmaceutical quality, mode of action and toxicological properties of the biological medicine. The clinical investigation of advanced therapy medicinal products with the intent of demonstrating safety and efficacy is particularly challenging because of the complexity of therapy, which often involves invasive interventions

  8. Enhancement of H{sup -}/D{sup -} volume production in a double plasma type negative ion source

    Energy Technology Data Exchange (ETDEWEB)

    Fukumasa, Osamu; Nishimura, Hideki; Sakiyama, Satoshi [Yamaguchi Univ., Ube (Japan). Faculty of Engineering

    1997-02-01

    H{sup -}/D{sup -} production in a pure volume source has been studied. In our double plasma type negative ion source, both energy and density of fast electrons are well controlled. With the use of this source, the enhancement of H{sup -}/D{sup -} production has been observed. Namely, under the same discharge power, the extracted H{sup -}/D{sup -} current in the double plasma operation is higher than that in the single plasma operation. At the same time, measurements of plasma parameters have been made in the source and the extractor regions for these two cases. (author)

  9. Controlling the nitric and nitrous oxide production of an atmospheric pressure plasma jet

    Science.gov (United States)

    Douat, Claire; Hubner, Simon; Engeln, Richard; Benedikt, Jan

    2016-09-01

    Atmospheric pressure plasma jets are non-thermal plasmas and have the ability to create reactive species. These features make it a very attractive tool for biomedical applications. In this work, we studied NO and N2O production, which are two species having biomedical properties. NO plays a role in the vascularization and in ulcer treatment, while N2O is used as anesthetic and analgesic gas. In this study, the plasma source is similar to the COST Reference Microplasma Jet (µ-APPJ). Helium is used as feed gas with small admixtures of molecular nitrogen and oxygen of below 1%. The absolute densities of NO and N2O were measured in the effluent of an atmospheric pressure RF plasma jet by means of ex-situ quantum-cascade laser absorption spectroscopy via a multi-pass cell in Herriot configuration. We will show that the species' production is dependent on several parameters such as power, flow and oxygen and nitrogen admixture. The NO and N2O densities are strongly dependent on the N2-O2 ratio. Changing this ratio allows for choosing between a NO-rich or a N2O-rich regime.

  10. Determination of trace elements in petroleum products by inductively coupled plasma techniques: A critical review

    Energy Technology Data Exchange (ETDEWEB)

    Sánchez, Raquel [Department of Analytical Chemistry, Nutrition and Food Sciences, P.O. Box 99, 03080, Alicante (Spain); Todolí, José Luis, E-mail: jose.todoli@ua.es [Department of Analytical Chemistry, Nutrition and Food Sciences, P.O. Box 99, 03080, Alicante (Spain); Lienemann, Charles-Philippe [IFP Energies Nouvelles, Rond-point de l' échangeur de Solaize, BP 3, F-69360 Solaize (France); Mermet, Jean-Michel [Spectroscopy Forever, 01390 Tramoyes (France)

    2013-10-01

    The fundamentals, applications and latter developments of petroleum products analysis through inductively coupled plasma optical emission spectrometry (ICP-OES) and mass spectrometry (ICP-MS) are revisited in the present bibliographic survey. Sample preparation procedures for the direct analysis of fuels by using liquid sample introduction systems are critically reviewed and compared. The most employed methods are sample dilution, emulsion or micro-emulsion preparation and sample decomposition. The first one is the most widely employed due to its simplicity. Once the sample has been prepared, an organic matrix is usually present. The performance of the sample introduction system (i.e., nebulizer and spray chamber) depends strongly upon the nature and properties of the solution finally obtained. Many different devices have been assayed and the obtained results are shown. Additionally, samples can be introduced into the plasma by using an electrothermal vaporization (ETV) device or a laser ablation system (LA). The recent results published in the literature showing the feasibility, advantages and drawbacks of latter alternatives are also described. Therefore, the main goal of the review is the discussion of the different approaches developed for the analysis of crude oil and its derivates by inductively coupled plasma (ICP) techniques. - Highlights: • Analysis of petroleum products by inductively coupled plasma techniques is revisited. • Fundamental studies are included together with reports dealing with applications. • Conventional and non-conventional sample introduction methods are considered. • Sample preparation methods are critically compared and described.

  11. Statistical and regulatory considerations in assessments of interchangeability of biological drug products.

    Science.gov (United States)

    Tóthfalusi, Lászlo; Endrényi, László; Chow, Shein-Chung

    2014-05-01

    When the patent of a brand-name, marketed drug expires, new, generic products are usually offered. Small-molecule generic and originator drug products are expected to be chemically identical. Their pharmaceutical similarity can be typically assessed by simple regulatory criteria such as the expectation that the 90% confidence interval for the ratio of geometric means of some pharmacokinetic parameters be between 0.80 and 1.25. When such criteria are satisfied, the drug products are generally considered to exhibit therapeutic equivalence. They are then usually interchanged freely within individual patients. Biological drugs are complex proteins, for instance, because of their large size, intricate structure, sensitivity to environmental conditions, difficult manufacturing procedures, and the possibility of immunogenicity. Generic and brand-name biologic products can be expected to show only similarity but not identity in their various features and clinical effects. Consequently, the determination of biosimilarity is also a complicated process which involves assessment of the totality of the evidence for the close similarity of the two products. Moreover, even when biosimilarity has been established, it may not be assumed that the two biosimilar products can be automatically substituted by pharmacists. This generally requires additional, careful considerations. Without declaring interchangeability, a new product could be prescribed, i.e. it is prescribable. However, two products can be automatically substituted only if they are interchangeable. Interchangeability is a statistical term and it means that products can be used in any order in the same patient without considering the treatment history. The concepts of interchangeability and prescribability have been widely discussed in the past but only in relation to small molecule generics. In this paper we apply these concepts to biosimilars and we discuss: definitions of prescribability and interchangeability and

  12. Time-dependent effects of ultraviolet and nonthermal atmospheric pressure plasma on the biological activity of titanium

    Science.gov (United States)

    Choi, Sung-Hwan; Jeong, Won-Seok; Cha, Jung-Yul; Lee, Jae-Hoon; Yu, Hyung-Seog; Choi, Eun-Ha; Kim, Kwang-Mahn; Hwang, Chung-Ju

    2016-09-01

    Here, we evaluated time-dependent changes in the effects of ultraviolet (UV) and nonthermal atmospheric pressure plasma (NTAPPJ) on the biological activity of titanium compared with that of untreated titanium. Grade IV machined surface titanium discs (12-mm diameter) were used immediately and stored up to 28 days after 15-min UV or 10-min NTAPPJ treatment. Changes of surface characteristics over time were evaluated using scanning electron microscopy, surface profiling, contact angle analysis, X-ray photoelectron spectroscopy, and surface zeta-potential. Changes in biological activity over time were as determined by analysing bovine serum albumin adsorption, MC3T3-E1 early adhesion and morphometry, and alkaline phosphatase (ALP) activity between groups. We found no differences in the effects of treatment on titanium between UV or NTAPPJ over time; both treatments resulted in changes from negatively charged hydrophobic (bioinert) to positively charged hydrophilic (bioactive) surfaces, allowing enhancement of albumin adsorption, osteoblastic cell attachment, and cytoskeleton development. Although this effect may not be prolonged for promotion of cell adhesion until 4 weeks, the effects were sufficient to maintain ALP activity after 7 days of incubation. This positive effect of UV and NTAPPJ treatment can enhance the biological activity of titanium over time.

  13. Biological variation in tPA-induced plasma clot lysis time

    NARCIS (Netherlands)

    S. Talens (Simone); J.J.M.C. Malfliet (Joyce); G. Rudež (Goran); H.M.H. Spronk (Henri); N.A.H. Janssen (Nicole); P. Meijer (Piet); C. Kluft (Cornelius); M.P.M. de Maat (Moniek); D.C. Rijken (Dingeman)

    2012-01-01

    textabstractHypofibrinolysis is a risk factor for venous and arterial thrombosis, and can be assessed by using a turbidimetric tPA-induced clot lysis time (CLT) assay. Biological variation in clot lysis time may affect the interpretation and usefulness of CLT as a risk factor for thrombosis. Suffici

  14. Biological variation in tPA-induced plasma clot lysis time

    NARCIS (Netherlands)

    S. Talens (Simone); J.J.M.C. Malfliet (Joyce); G. Rudež (Goran); H.M.H. Spronk (Henri); N.A.H. Janssen (Nicole); P. Meijer (Piet); C. Kluft (Cornelius); M.P.M. de Maat (Moniek); D.C. Rijken (Dingeman)

    2012-01-01

    textabstractHypofibrinolysis is a risk factor for venous and arterial thrombosis, and can be assessed by using a turbidimetric tPA-induced clot lysis time (CLT) assay. Biological variation in clot lysis time may affect the interpretation and usefulness of CLT as a risk factor for thrombosis.

  15. Syngas production by plasma treatments of alcohols, bio-oils and wood

    OpenAIRE

    Arabi, Khadija; Aubry, Olivier; Khacef, Ahmed; Cormier, Jean Marie

    2012-01-01

    International audience; Exploitation of forest resources for energy production includes various methods of biomass processing. Gasification is one of the ways to recover energy from biomass. The Syngas produced from biomass can be used to power internal combustion engines, or, after purification, to supply fuel cells. The paper is summarizing results obtained through a non thermal arc plasma reactor at laboratory scale. A stationary discharge (I = 150mA) is used to perform physical diagnostic...

  16. Composition of thermodestruction products of biologically active compounds polluting the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriyev, M.T.; Rastyannikov, Y.G.; Sotnikov, Y.Y.; Volkov, S.A.

    1981-01-01

    The most promising method of removal of biologically active compounds such as microorganisms, antibiotics, food and other household waste from industrial waste gases is to destroy them by thermal destruction including burning. In this case, products of thermodestruction enter into the atmosphere along with carbon dioxide and steam and can unfavorably affect the population. Thus, mass spectrometric analyses have determined in the waste gases of antibiotics production aldehydes and ketones (croton- and adipalaldehydes, acetone), alcohols (propanol and butanol), amines, unsaturated and aromatic hydrocarbons. The composition of thermodestruction products of biologically active compounds was identified by their pyrolysis at 700/sup 0/C for 2 min. in the presence of air. The main components were proteins and amino acids. The products of pyrolysis were analyzed by chromato-mass-spectrometric and gas-chromatographic methods by means of a two-flame thermionic detector. No significant difference between the thermodestruction products of proteins and amino acids was found. Many of detected substances can be not only toxic but also emit strong unpleasant odors. The studies revealed toxic substances that pollute the atmospheric air during removal of biologically-active compounds from waste gases.

  17. Immobilized Biofilm in Thermophilic Biohydrogen Production using Synthetic versus Biological Materials

    Directory of Open Access Journals (Sweden)

    Jaruwan Wongthanate

    2015-02-01

    Full Text Available Biohydrogen production was studied from the vermicelli processing wastewater using synthetic and biological materials as immobilizing substrate employing a mixed culture in a batch reactor operated at the initial pH 6.0 and thermophilic condition (55 ± 1ºC. Maximum cumulative hydrogen production (1,210 mL H2/L wastewater was observed at 5% (v/v addition of ring-shaped synthetic material, which was the ring-shaped hydrophobic acrylic. Regarding 5% (v/v addition of synthetic and biological materials, the maximum cumulative hydrogen production using immobilizing synthetic material of ball-shaped hydrophobic polyethylene (HBPE (1,256.5 mL H2/L wastewater was a two-fold increase of cumulative hydrogen production when compared to its production using immobilizing biological material of rope-shaped hydrophilic ramie (609.8 mL H2/L wastewater. SEM observation of immobilized biofilm on a ball-shaped HBPE or a rope-shaped hydrophilic ramie was the rod shape and gathered into group.

  18. Investigation of specificity ensuring of quality of biological medicinal products on example of drugs Cortexin and Retinalamin

    Directory of Open Access Journals (Sweden)

    N. O. Vetiutneva

    2013-06-01

    Full Text Available Biological medical products nowadays are one of the most promising area at the pharmaceutical market. Biopharmaceutical market has significant benefits such as fast and effective development of production facilities, the development of more effective and safer medical products. The aim of our research was, on the example of medical products Cortexin and Retinalamin, examine the specifics of quality of biological medicinal products in the chain from production to sale. The objects of study - original biological medicines Cortexin and Retinalamin. Comparative, systematic, analytical methods and reviews were used. Biological medical products have fundamental differences from synthetic medicines, due to their source - alive cells which are usually used in their production process. Each production cycle results in a unique finished pharmaceutical products and minimal differences in the modes of production can significantly effect on the properties of biological medical products. Therefore, even if the physical, chemical and biological properties of the product thoroughly studied and described, it does not guarantee therapeutic equivalence of two biological products which are manufactured in different conditions. One of the most important issues today is the problem of maintaining properties and quality of biological medicines. These issues are actively resolving on the native pharmaceutical market: quality control system are developing and implementing in accordance with international standards in order to maintain maximum efficiency of biological medicines and to protect consumers from defective products. Biological products require special conditions of storage and transportation. In order to save physical, chemical and therapeutic properties, strict compliance with the relevant conditions of packaging, transport and intermediate storage, related to deviations in temperature during transportation and storage is needed. The production process

  19. Insects: an underrepresented resource for the discovery of biologically active natural products

    Directory of Open Access Journals (Sweden)

    Lauren Seabrooks

    2017-07-01

    Full Text Available Nature has been the source of life-changing and -saving medications for centuries. Aspirin, penicillin and morphine are prime examples of Nature׳s gifts to medicine. These discoveries catalyzed the field of natural product drug discovery which has mostly focused on plants. However, insects have more than twice the number of species and entomotherapy has been in practice for as long as and often in conjunction with medicinal plants and is an important alternative to modern medicine in many parts of the world. Herein, an overview of current traditional medicinal applications of insects and characterization of isolated biologically active molecules starting from approximately 2010 is presented. Insect natural products reviewed were isolated from ants, bees, wasps, beetles, cockroaches, termites, flies, true bugs, moths and more. Biological activities of these natural products from insects include antimicrobial, antifungal, antiviral, anticancer, antioxidant, anti-inflammatory and immunomodulatory effects.

  20. Insects: an underrepresented resource for the discovery of biologically active natural products.

    Science.gov (United States)

    Seabrooks, Lauren; Hu, Longqin

    2017-07-01

    Nature has been the source of life-changing and -saving medications for centuries. Aspirin, penicillin and morphine are prime examples of Nature׳s gifts to medicine. These discoveries catalyzed the field of natural product drug discovery which has mostly focused on plants. However, insects have more than twice the number of species and entomotherapy has been in practice for as long as and often in conjunction with medicinal plants and is an important alternative to modern medicine in many parts of the world. Herein, an overview of current traditional medicinal applications of insects and characterization of isolated biologically active molecules starting from approximately 2010 is presented. Insect natural products reviewed were isolated from ants, bees, wasps, beetles, cockroaches, termites, flies, true bugs, moths and more. Biological activities of these natural products from insects include antimicrobial, antifungal, antiviral, anticancer, antioxidant, anti-inflammatory and immunomodulatory effects.

  1. Apple biological and physiological disorders in the orchard and in postharvest according to production system

    Directory of Open Access Journals (Sweden)

    Carlos Roberto Martins

    2013-03-01

    Full Text Available The study aimed to evaluate the incidence of biological and physiological disorders in the field and postharvested apples cvs. Gala, Fuji and Catarina grown in four production systems: conventional, organic transition, integrated and organic. Apples were evaluated for damages related to biological and physiological disorders in the orchard and after harvest. The greatest damages were attributed to pests, especially Anastrepha fraterculus in the organic system and Grapholita molesta in the organic transition. Apples produced in organic orchards had higher damage levels caused by postharvest physiological disorders than those grown in other production systems. For apples becoming from organic orchards most of the damage was due to lenticels breakdown and degeneration ('Gala', and bitter pit ('Fuji' and 'Catarina'. The incidence of postharvest rot was not influenced by apple production system.

  2. Electromagnetic ion-cyclotron instability in a dusty plasma with product-bi-kappa distributions for the plasma particles

    Science.gov (United States)

    dos Santos, M. S.; Ziebell, L. F.; Gaelzer, R.

    2017-01-01

    We study the dispersion relation for parallel propagating ion-cyclotron (IC) waves in a dusty plasma, considering situations where the velocity dispersion along perpendicular direction is greater than along the parallel direction, and considering the use of product-bi-kappa (PBK) velocity distributions for the plasma particles. The results obtained by numerical solution of the dispersion relation, in a case with isotropic Maxwellian distributions for electrons and PBK distribution for ions, show the occurrence of the electromagnetic ion-cyclotron instability (EMIC), and show that the decrease in the kappa indexes of the PBK ion distribution leads to significant increase in the magnitude of the growth rates and in the range of wavenumber for which the instability occurs. On the other hand, for anisotropic Maxwellian distribution for ions and PBK distribution for electrons, the decrease of the kappa index in the PBK electron distribution contributes to reduce the growth rate of the EMIC instability, but the reduction effect is less pronounced than the increase obtained with ion PBK distribution with the same kappa index. The results obtained also show that, as a general rule, the presence of a dust population contributes to reduce the instability in magnitude of the growth rates and range, but that in the case of PBK ion distribution with small kappa indexes the instability may continue to occur for dust populations which would eliminate completely the instability in the case of bi-Maxwellian ion distributions. It has also been seen that the anisotropy due to the kappa indexes in the ion PBK distribution is not so efficient in producing the EMIC instability as the ratio of perpendicular and parallel ion temperatures, for equivalent value of the effective temperature.

  3. What controls biological productivity in coastal upwelling systems? Insights from a comparative modeling study

    Science.gov (United States)

    Lachkar, Z.; Gruber, N.

    2011-06-01

    The magnitude of the biological productivity in Eastern Boundary Upwelling Systems (EBUS) is traditionally viewed as directly reflecting the upwelling intensity. Yet, different EBUS show different sensitivities of productivity to upwelling-favorable winds (Carr and Kearns, 2003). Here, using a comparative modeling study of the California Current System (California CS) and Canary Current System (Canary CS), we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of biological productivity to upwelling strength. To this end, we made a series of eddy-resolving simulations of the California CS and Canary CS using the Regional Ocean Modeling System (ROMS), coupled to a nitrogen based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD) ecosystem model. We find the nutrient content of the euphotic zone to be 20 % smaller in the Canary CS relative to the California CS. Yet, the biological productivity is 50 % smaller in the latter. This is due to: (1) a faster nutrient-replete growth in the Canary CS relative to the California CS, related to a more favorable light and temperature conditions in the Canary CS, and (2) the longer nearshore water residence times in the Canary CS which lead to larger buildup of biomass in the upwelling zone, thereby enhancing the productivity. The longer residence times in the Canary CS appear to be associated with the wider continental shelves and the lower eddy activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and enhancing the coupling between new and export production in the Northwest African system. Our results suggest that climate change induced perturbations such as upwelling favorable wind intensification might lead to contrasting biological responses in the California CS and the Canary CS, with major implications for the biogeochemical cycles and fisheries

  4. What controls biological productivity in coastal upwelling systems? Insights from a comparative modeling study

    Directory of Open Access Journals (Sweden)

    Z. Lachkar

    2011-06-01

    Full Text Available The magnitude of the biological productivity in Eastern Boundary Upwelling Systems (EBUS is traditionally viewed as directly reflecting the upwelling intensity. Yet, different EBUS show different sensitivities of productivity to upwelling-favorable winds (Carr and Kearns, 2003. Here, using a comparative modeling study of the California Current System (California CS and Canary Current System (Canary CS, we show how physical and environmental factors, such as light, temperature and cross-shore circulation modulate the response of biological productivity to upwelling strength. To this end, we made a series of eddy-resolving simulations of the California CS and Canary CS using the Regional Ocean Modeling System (ROMS, coupled to a nitrogen based Nutrient-Phytoplankton-Zooplankton-Detritus (NPZD ecosystem model. We find the nutrient content of the euphotic zone to be 20 % smaller in the Canary CS relative to the California CS. Yet, the biological productivity is 50 % smaller in the latter. This is due to: (1 a faster nutrient-replete growth in the Canary CS relative to the California CS, related to a more favorable light and temperature conditions in the Canary CS, and (2 the longer nearshore water residence times in the Canary CS which lead to larger buildup of biomass in the upwelling zone, thereby enhancing the productivity. The longer residence times in the Canary CS appear to be associated with the wider continental shelves and the lower eddy activity characterizing this upwelling system. This results in a weaker offshore export of nutrients and organic matter, thereby increasing local nutrient recycling and enhancing the coupling between new and export production in the Northwest African system. Our results suggest that climate change induced perturbations such as upwelling favorable wind intensification might lead to contrasting biological responses in the California CS and the Canary CS, with major implications for the biogeochemical cycles

  5. New synthetic strategies towards psammaplin A, access to natural product analogues for biological evaluation.

    Science.gov (United States)

    Baud, Matthias G J; Leiser, Thomas; Meyer-Almes, Franz-Josef; Fuchter, Matthew J

    2011-02-07

    New synthetic routes towards the natural product psammaplin A were developed with the particular view to preparing diverse analogues for biological assessment. These routes utilize cheap and commercially available starting materials, and allowed access to psammaplin A analogues not accessible via currently reported methods. Preliminary biological studies revealed these compounds to be the most potent non peptidic inhibitors of the enzyme histone deacetylase 1 (HDAC1, class I) discovered so far. Interestingly, psammaplin A and our synthetic analogues show class I selectivity in vitro, an important feature for the design and synthesis of future isoform selective inhibitors.

  6. Establishing a cell biology platform: isolation and preservation of human blood products

    OpenAIRE

    2014-01-01

    Dissertação para obtenção do Grau de Mestre em Genética Molecular e Biomedicina The use of human primary cells provide researchers in different areas with irrefutable more biologically relevant data than using cell lines or animal blood cells. The work was performed in the scope of the Cell Biology Services @ CEDOC, aiming to provide viable and trustful human primary cells and products. We had three main objectives: protocol optimizations for blood cell isolation, culture and cryopre...

  7. Performance goals for immunoglobulins and serum free light chain measurements in plasma cell dyscrasias can be based on biological variation

    DEFF Research Database (Denmark)

    Hansen, Charlotte Toftmann

    2016-01-01

    , data based on biological variation is a good and reliable method for setting desirable performance standards; this also applies for the measurements of paraprotein and sFLC. The benefits of this approach are several. Among others, it is independent of the clinician, and it provides us with information......Measurements of immunoglobulins and serum free light chains (sFLC) are frequently used in patients with monoclonal plasma cell dyscrasia (PCD). For optimum patient care, well-defined performance standards or goals for the measured concentrations of immunoglobulins and sFLC are required. Generally...... of immunoglobulins and sFLC, studies accounting for number of individuals, samples, and replicates, as well as time length of the studies are needed....

  8. Metabolic engineering of microorganisms for biofuels production: from bugs to synthetic biology to fuels

    Energy Technology Data Exchange (ETDEWEB)

    Kuk Lee, Sung; Chou, Howard; Ham, Timothy S.; Soon Lee, Taek; Keasling, Jay D.

    2009-12-02

    The ability to generate microorganisms that can produce biofuels similar to petroleum-based transportation fuels would allow the use of existing engines and infrastructure and would save an enormous amount of capital required for replacing the current infrastructure to accommodate biofuels that have properties significantly different from petroleum-based fuels. Several groups have demonstrated the feasibility of manipulating microbes to produce molecules similar to petroleum-derived products, albeit at relatively low productivity (e.g. maximum butanol production is around 20 g/L). For cost-effective production of biofuels, the fuel-producing hosts and pathways must be engineered and optimized. Advances in metabolic engineering and synthetic biology will provide new tools for metabolic engineers to better understand how to rewire the cell in order to create the desired phenotypes for the production of economically viable biofuels.

  9. Clinical implications of basic science discoveries: janus resurrected--two faces of B cell and plasma cell biology.

    Science.gov (United States)

    Woodle, E S; Rothstein, D M

    2015-01-01

    B cells play a complex role in the immune response. In addition to giving rise to plasma cells (PCs) and promoting T cell responses via antigen presentation, they perform immunoregulatory functions. This knowledge has created concerns regarding nonspecific B cell depletional therapy because of the potential to paradoxically augment immune responses. Recent studies now indicate that PCs have immune functions beyond immunoglobulin synthesis. Evidence for a new role for PCs as potent regulatory cells (via IL-10 and IL-35 production) is discussed including the implications for PC-targeted therapies currently being developed for clinical transplantation.

  10. Biological ensilage additives as pretreatment for maize to increase the biogas production

    Energy Technology Data Exchange (ETDEWEB)

    Vervaeren, H.; Hostyn, K.; Willems, B. [Howest, PIH, Environmental Science Department, Graaf K. de Goedelaan, 5, 8500 Kortrijk (Belgium); Ghekiere, G. [POVLT, Ieperseweg 87, 8800 Rumbeke (Belgium)

    2010-09-15

    Several biological ensilage additives were tested on maize substrate for their effect on biogas production and preservation of ODM content. In general, the addition of some biological additives and subsequent storage for 7 weeks could enhance the biogas and biomethane production per ODM when compared to the untreated sample. A common microbial inoculent containing homo-fermentative and hetero-fermentative bacteria (Bonsilage Mais {sup registered}), had no beneficial effect on biogas and biomethane production compared with the non-treated sample (-12.7% and -13.1% per ODM, respectively). More complex additives with hetero- and homo-fermentative activity (Silasil Energy {sup registered}) as well as enzymes (Sil-all 4 x 4 {sup registered}) or bacteria and yeasts (Microferm {sup registered}) did effectively increase the biogas production per ODM (respectively with 11.8, 10.1 and 14.7%). Losses in ODM content were minor in all samples. These results might indicate that more divergent biological additives involving yeasts or enzymes during ensiling are preferred as maize preservation tools for anaerobic digestion instead of a spontaneous ensilage population or to add only homo- and hetero-fermentative strains. The nature of the additive might enhance the hydrolysis step in the anaerobic digestion process by decomposing complex carbohydrate structures. (author)

  11. Production of nitric oxide using a microwave plasma torch and its application to fungal cell differentiation

    Science.gov (United States)

    Na, Young Ho; Kumar, Naresh; Kang, Min-Ho; Cho, Guang Sup; Choi, Eun Ha; Park, Gyungsoon; Uhm, Han Sup

    2015-03-01

    The generation of nitric oxide by a microwave plasma torch is proposed for its application to cell differentiation. A microwave plasma torch was developed based on basic kinetic theory. The analytical theory indicates that nitric oxide density is nearly proportional to oxygen molecular density and that the high-temperature flame is an effective means of generating nitric oxide. Experimental data pertaining to nitric oxide production are presented in terms of the oxygen input in units of cubic centimeters per minute. The apparent length of the torch flame increases as the oxygen input increases. The various levels of nitric oxide are observed depending on the flow rate of nitrogen gas, the mole fraction of oxygen gas, and the microwave power. In order to evaluate the potential of nitric oxide as an activator of cell differentiation, we applied nitric oxide generated from the microwave plasma torch to a model microbial cell (Neurospora crassa: non-pathogenic fungus). Germination and hyphal differentiation of fungal cells were not dramatically changed but there was a significant increase in spore formation after treatment with nitric oxide. In addition, the expression level of a sporulation related gene acon-3 was significantly elevated after 24 h upon nitric oxide treatment. Increase in the level of nitric oxide, nitrite and nitrate in water after nitric oxide treatment seems to be responsible for activation of fungal sporulation. Our results suggest that nitric oxide generated by plasma can be used as a possible activator of cell differentiation and development.

  12. Syngas production by plasma treatments of alcohols, bio-oils and wood

    Science.gov (United States)

    Arabi, K.; Aubry, O.; Khacef, A.; Cormier, J.-M.

    2012-12-01

    Exploitation of forest resources for energy production includes various methods of biomass processing. Gasification is one of the ways to recover energy from biomass. The Syngas produced from biomass can be used to power internal combustion engines, or, after purification, to supply fuel cells. The paper is summarizing results obtained through a non thermal arc plasma reactor at laboratory scale. A stationary discharge (I = 150mA) is used to perform physical diagnostics and also chemical analysis. The arc is formed between two electrodes made of graphite. We first present results on plasma-steam reforming of alcohols and bio-oils mixed in water. The outlet gas compositions are given from various alcohols and-bio-oils obtained at different experimental conditions. The second part of the paper is dedicated to a direct plasma treatment of wood (beech) at laboratory scale. One of the electrodes is surrounded by wood. The final part of the paper is a general discussion about efficiencies and comparisons of plasma treatments presented. The results obtained are discussed by considering the steam reforming reactions and the water gas shift reaction.

  13. Mass identification of the neutral products generated in the plasma treatment of polluted atmospheres

    Science.gov (United States)

    Seymour, David

    2013-09-01

    Plasmas produced using Dielectric Barrier Discharge (DBD) devices are very effective in the abatement of air pollution resulting from, for example, the emission of volatile organic compounds (VCOs) by a range of industrial and agricultural processes. The development and monitoring of effective DBD systems can be investigated by advanced mass spectrometric methods specifically configured for analysis at high and atmospheric pressures The present work involves the operation of a small DBD reactor which uses either a helium or nitrogen carrier gas to sustain the plasma to which may be added reactive gases, such as oxygen, as well as samples of pollutants such as chlorinated hydrocarbons, including trichloroethylene. The mass spectrometric analysis was performed using a specially configured system manufactured by Hiden Analytical Ltd. The DBD source may also be combined with a catalyst for plasma-enhanced catalysis. The neutral products of the reactions proceeding in the plasma at atmospheric pressure are sampled through the capillary sampling system which also reduces the pressure of the gas mixture delivered to the ionisation source of the quadrupole mass spectrometer. The ions produced are subsequently mass identified. We describe typical data and comment on the advantages of this technique.

  14. Biological Systems of Vitamin K: A Plasma Nutriproteomics Study of Subclinical Vitamin K Deficiency in 500 Nepalese Children

    Science.gov (United States)

    Schulze, Kerry J.; Cole, Robert N.; Wu, Lee S. F.; Yager, James D.; Groopman, John; Christian, Parul; West, Keith P.

    2016-01-01

    Abstract Vitamin K (VK) is a fat-soluble vitamin whose deficiency disrupts coagulation and may disturb bone and cardiovascular health. However, the scale and systems affected by VK deficiency in pediatric populations remains unclear. We conducted a study of the plasma proteome of 500 Nepalese children 6–8 years of age (male/female ratio = 0.99) to identify proteins associated with VK status. We measured the concentrations of plasma lipids and protein induced by VK absence-II (PIVKA-II) and correlated relative abundance of proteins quantified by mass spectrometry with PIVKA-II. VK deficiency (PIVKA-II >2 μg/L) was associated with a higher abundance of low-density lipoproteins, total cholesterol, and triglyceride concentrations (p 10% of the children, five proteins were associated with PIVKA-II and seven proteins were differentially abundant between VK deficient versus sufficient children, including coagulation factor-II, hemoglobin, and vascular endothelial cadherin, passing a false discovery rate (FDR) threshold of 10% (q PIVKA-II or VK deficiency at a less stringent FDR (q  0.7). Untargeted proteomics offers a novel systems approach to elucidating biological processes of coagulation, vascularization, and erythrocyte oxidative stress related to VK status. The results may help elucidate subclinical metabolic disturbances related to VK deficiency in populations. PMID:26913649

  15. Biological Systems of Vitamin K: A Plasma Nutriproteomics Study of Subclinical Vitamin K Deficiency in 500 Nepalese Children.

    Science.gov (United States)

    Lee, Sun Eun; Schulze, Kerry J; Cole, Robert N; Wu, Lee S F; Yager, James D; Groopman, John; Christian, Parul; West, Keith P

    2016-04-01

    Vitamin K (VK) is a fat-soluble vitamin whose deficiency disrupts coagulation and may disturb bone and cardiovascular health. However, the scale and systems affected by VK deficiency in pediatric populations remains unclear. We conducted a study of the plasma proteome of 500 Nepalese children 6-8 years of age (male/female ratio = 0.99) to identify proteins associated with VK status. We measured the concentrations of plasma lipids and protein induced by VK absence-II (PIVKA-II) and correlated relative abundance of proteins quantified by mass spectrometry with PIVKA-II. VK deficiency (PIVKA-II>2 μg/L) was associated with a higher abundance of low-density lipoproteins, total cholesterol, and triglyceride concentrations (p10% of the children, five proteins were associated with PIVKA-II and seven proteins were differentially abundant between VK deficient versus sufficient children, including coagulation factor-II, hemoglobin, and vascular endothelial cadherin, passing a false discovery rate (FDR) threshold of 10% (qPIVKA-II or VK deficiency at a less stringent FDR (q0.7). Untargeted proteomics offers a novel systems approach to elucidating biological processes of coagulation, vascularization, and erythrocyte oxidative stress related to VK status. The results may help elucidate subclinical metabolic disturbances related to VK deficiency in populations.

  16. Biological production, export efficiency, and phytoplankton communities across 8000 km of the South Atlantic

    Science.gov (United States)

    Howard, E. M.; Durkin, C. A.; Hennon, G. M. M.; Ribalet, F.; Stanley, R. H. R.

    2017-07-01

    In situ oxygen tracers (triple oxygen isotope and oxygen/argon ratios) were used to evaluate meridional trends in surface biological production and export efficiency across 8000 km of the tropical and subtropical South Atlantic in March-May 2013. We used observations of picophytoplankton, nanophytoplankton, and microphytoplankton to evaluate community structure and diversity and assessed the relationships of these characteristics with production, export efficiency, and particulate organic carbon (POC) fluxes. Rates of productivity were relatively uniform along most of the transect with net community production (NCP) between 0 and 10 mmol O2 m-2 d-1, gross primary production (GPP) between 40 and 100 mmol O2 m-2 d-1, and NCP/GPP, a measure of export efficiency, ranging from 0.1 to 0.2 (0.05-0.1 in carbon units). However, notable exceptions to this basin-scale homogeneity included two locations with highly enhanced NCP and export efficiency compared to surrounding regions. Export of POC and particulate nitrogen, derived from sediment traps, correlated with GPP across the transect, over which the surface community was dominated numerically by picophytoplankton. NCP, however, did not correlate with POC flux; the mean difference between NCP and POC flux was similar to published estimates of dissolved organic carbon export from the surface ocean. The interrelated rates of production presented in this work contribute to the understanding, building on the framework of better-studied ocean basins, of how carbon is biologically transported between the atmosphere and the deep ocean.

  17. Milk proteins-derived bioactive peptides in dairy products: molecular, biological and methodological aspects

    Directory of Open Access Journals (Sweden)

    Bartłomiej Dziuba

    2014-03-01

    Full Text Available Proteins are one of the primary components of the food, both in terms of nutrition and function. They are main source of amino acids, essential for synthesis of proteins, and also source of energy. Additionally, many proteins exhibit specifi c biological activities, which may have effect on functional or pro-health properties of food products. These proteins and their hydrolysis products, peptides, may infl uence the properties of food and human organism. The number of commercially available food products containing bioactive peptides is very low, apart from that milk proteins are their rich source. It could be supposed that number of available products with declared activity will rise in near future because of observed strong uptrend on interest in such products. Molecular and biological properties of milk proteins, as precursors of bioactive peptides was characterised in the work. Therefore, the strategy of research and obtaining of such peptides both in laboratory and industrial scale, as well as the range of their commercial application, was presented. Several examples of research efforts presenting high potential to develop new products containing bioactive peptides from milk proteins and predetermined as nutraceuticals was described.

  18. Milk proteins-derived bioactive peptides in dairy products: molecular, biological and methodological aspects.

    Science.gov (United States)

    Dziuba, Bartłomiej; Dziuba, Marta

    2014-01-01

    Proteins are one of the primary components of the food, both in terms of nutrition and function. They are main source of amino acids, essential for synthesis of proteins, and also source of energy. Additionally, many proteins exhibit specific biological activities, which may have effect on functional or pro-health properties of food products. These proteins and their hydrolysis products, peptides, may influence the properties of food and human organism. The number of commercially available food products containing bioactive peptides is very low, apart from that milk proteins are their rich source. It could be supposed that number of available products with declared activity will rise in near future because of observed strong uptrend on interest in such products. Molecular and biological properties of milk proteins, as precursors of bioactive peptides was characterised in the work. Therefore, the strategy of research and obtaining of such peptides both in laboratory and industrial scale, as well as the range of their commercial application, was presented. Several examples of research efforts presenting high potential to develop new products containing bioactive peptides from milk proteins and predetermined as nutraceuticals was described.

  19. Cold atmospheric pressure plasma treatment of ready-to-eat meat: Inactivation of Listeria innocua and changes in product quality

    DEFF Research Database (Denmark)

    Röd, Sara Katrine; Hansen, Flemming; Leipold, Frank;

    Sliced ready-to-eat (RTE) meat products are susceptible to growth of the foodborne pathogenic bacterium, Listeria monocytogenes. Cold atmospheric pressure plasma (CAPP) may be applicable for surface decontamination in sealed bags thus avoiding recontamination. Plasmas (Fig. 1), created in neutral...

  20. Fetal nucleic acids in maternal plasma: from biology to clinical translation.

    Science.gov (United States)

    Bunkar, Neha; Bhargava, Arpit; Chaudhury, Koel; Sharma, Radhey Shyam; Lohiya, Nirmal Kumar; Mishra, Pradyumna Kumar

    2018-01-01

    Exposure to environmental contaminants during the critical window of pregnancy results in deregulation of highly coordinated genetic and epigenetic mechanisms involved in prenatal growth. Such disturbances significantly alter the fetal programming, and lead to various developmental disorders immediately, over the lifetime, or transgenerationally. During the process of placental development, fetal nucleic acids enter maternal plasma as a result of necrotic, apoptotic, and inflammatory mechanisms. These nucleic acids reflect normal or abnormal ongoing cellular changes during prenatal fetal development. Here, we critically review the utility of maternally circulating cell free fetal nucleic acids towards developing reliable biomarkers for widespread screening of environmentally-associated fetal abnormalities. We further discuss the most recent developments in the fetal nucleic acid analysis, quantification methodologies, challenges involved in their accurate detection and their potential applications in fetomaternal medicine.

  1. Products and mechanisms of the oxidation of organic compounds in atmospheric air plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Marotta, Ester; Schiorlin, Milko; Paradisi, Cristina [Department of Chemical Sciences, Universita di Padova, Via Marzolo 1, 35131 Padova (Italy); Rea, Massimo, E-mail: cristina.paradisi@unipd.i [Department of Electrical Engineering, Universita di Padova, 35131 Padova (Italy)

    2010-03-31

    Atmospheric plasma-based technologies are developing as a powerful means for air purification, specifically for the oxidation of organic pollutants. To achieve a better control on the emissions produced by such treatments mechanistic insight is needed in the complex reactions of volatile organic compounds (VOCs) within the plasma. An account is given here of our comparative studies of the behaviour of model VOCs in response to different corona regimes (+dc, -dc and +pulsed) implemented within the same flow reactor. Model VOCs considered include two alkanes (n-hexane and i-octane), one aromatic hydrocarbon (toluene) and two halogenated methanes, dibromomethane (CH{sub 2}Br{sub 2}) and dibromodifluoromethane (CF{sub 2}Br{sub 2}, halon 1202). Efficiency and product data are reported and discussed as well as various possible initiation reactions. A powerful diagnostic tool is ion analysis, performed by atmospheric pressure chemical ionization-mass spectrometry: it provides a map of major ions and ion-molecule reactions and a rationale for interpreting current/voltage characteristics of dc coronas. It is shown that, depending on the specific VOC and corona regime adopted, different initiation steps prevail in the VOC-oxidation process and that the presence of a VOC, albeit in small amounts (500 ppm), can greatly affect some important plasma properties (ion population, current/voltage profile, post-discharge products).

  2. Pyrolysis of Polyolefins Using Rotating Arc Plasma Technology for Production of Acetylene

    Directory of Open Access Journals (Sweden)

    Ming Zhang

    2017-04-01

    Full Text Available Polyolefin, as one of the most widely used macromolecule materials, has been one of the most serious threats to the environment. Current treatment methods of waste polyolefin including landfill, incineration, and thermal degradation have suffered from severe problems such as secondary pollution and the generation of other toxic substances. In this article, we report for the first time a high-efficiency method to produce high-value C2H2 from polyolefins using a rotating direct current arc plasma reactor, using polyethylene and polypropylene as feedstocks. The essence of this method is that a reductive atmosphere of pyrolysis enables a thermodynamic preference to C2H2 over other carbon-containing gas and the rotating direct current arc plasma reactor allows for a uniform distribution of high temperature to ensure high conversion of polymers. Thermodynamic simulation of product composition was performed, and the effect of plasma input power, polyolefin feed rate, and working gas flow rate on the pyrolysis results was experimentally investigated. It was found that, with proper parameter control, approximately complete conversion of carbon in polyolefin could be obtained, with a C2H2 selectivity higher than 80% and a C2H2 yield higher than 70%. These results not only create new opportunities for the reuse of polymer waste, but are also instructive for the green production of C2H2.

  3. Highly effective sorbents obtained by treating agrowaste products in cold plasma

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Sorbents are widely used in purification of various liquids and gases, offering a universal means for wastewater and air cleaning. The most promising sorbents are those obtained from agrowaste products such as rice or buckwheat husk. Processing of husk in cold plasma modifies the composition, structure and surface properties of the raw material and raises its porosity, thus substantially improving the sorption properties of the final product.Husk as a raw material for producing sorbents has the following advantageous properties: (1) appropriate chemical composition; (2) low cost; (3) high dispersity, due to which there is no need in any special treatment of the material prior to its exposing to plasma; (4) scaly structure and developed porous surface ensuring a high surface-to-volume ratio. The best properties are displayed by the sorbents obtained in cold plasma under reduced pressures of 53.2 Pa. The raw naterial traverses the region occupied by the plasma and, as it does so, it gets heated up to a temperature of 250 - 350 ℃. The whole process involves two stages: combustion of the raw material and modification of its properties under the action of the plasma. The combustion proceeds due to the oxygen contained in the starting material. During the combustion, the hydrogen contained in the starting material and some part of the carbon also burn out.The resultant scaly sorbent is accumulated in a cooler. The scales are black; they range in sizes from 1mm to 5 mm.The sorbents obtained are remarkable for their useful properties and outperform most of the traditional sorbents used in modern industry. The starting materials are inexpensive, and their resources are almost unlimited. The sorbents have rather a low production cost (1.8-2.5($)/kg). The sorbents can be used for cleaning hydrosphere from water pollutants on a large scale. The degree of cleaning water surface from oil products with sorbents was a subject of investigation. The highest degree of purification

  4. High-latitude controls of thermocline nutrients and low latitude biological productivity.

    Science.gov (United States)

    Sarmiento, J L; Gruber, N; Brzezinski, M A; Dunne, J P

    2004-01-01

    The ocean's biological pump strips nutrients out of the surface waters and exports them into the thermocline and deep waters. If there were no return path of nutrients from deep waters, the biological pump would eventually deplete the surface waters and thermocline of nutrients; surface biological productivity would plummet. Here we make use of the combined distributions of silicic acid and nitrate to trace the main nutrient return path from deep waters by upwelling in the Southern Ocean and subsequent entrainment into subantarctic mode water. We show that the subantarctic mode water, which spreads throughout the entire Southern Hemisphere and North Atlantic Ocean, is the main source of nutrients for the thermocline. We also find that an additional return path exists in the northwest corner of the Pacific Ocean, where enhanced vertical mixing, perhaps driven by tides, brings abyssal nutrients to the surface and supplies them to the thermocline of the North Pacific. Our analysis has important implications for our understanding of large-scale controls on the nature and magnitude of low-latitude biological productivity and its sensitivity to climate change.

  5. Characterization of persistent colors and decolorization of effluent from biologically treated cellulosic ethanol production wastewater.

    Science.gov (United States)

    Shan, Lili; Liu, Junfeng; Yu, Yanling; Ambuchi, John J; Feng, Yujie

    2016-05-01

    The high chroma of cellulosic ethanol production wastewater poses a serious environmental concern; however, color-causing compounds are still not fully clear. The characteristics of the color compounds and decolorization of biologically treated effluent by electro-catalytic oxidation were investigated in this study. Excitation-emission matrix (EEM), fourier transform infrared spectrometer (FTIR), UV-Vis spectra, and ultrafiltration (UF) fractionation were used to analyze color compounds. High chroma of wastewater largely comes from humic materials, which exhibited great fluorescence proportion (67.1 %) in the biologically treated effluent. Additionally, the color compounds were mainly distributed in the molecular weight fractions with 3-10 and 10-30 kDa, which contributed 53.5 and 34.6 % of the wastewater color, respectively. Further decolorization of biologically treated effluent by electro-catalytic oxidation was investigated, and 98.3 % of color removal accompanied with 97.3 % reduction of humic acid-like matter was achieved after 180 min. The results presented herein will facilitate the development of a well decolorization for cellulosic ethanol production wastewater and better understanding of the biological fermentation.

  6. Uncertainty propagation in modeling of plasma-assisted hydrogen production from biogas

    Science.gov (United States)

    Zaherisarabi, Shadi; Venkattraman, Ayyaswamy

    2016-10-01

    With the growing concern of global warming and the resulting emphasis on decreasing greenhouse gas emissions, there is an ever-increasing need to utilize energy-production strategies that can decrease the burning of fossil fuels. In this context, hydrogen remains an attractive clean-energy fuel that can be oxidized to produce water as a by-product. In spite of being an abundant species, hydrogen is seldom found in a form that is directly usable for energy-production. While steam reforming of methane is one popular technique for hydrogen production, plasma-assisted conversion of biogas (carbon dioxide + methane) to hydrogen is an attractive alternative. Apart from producing hydrogen, the other advantage of using biogas as raw material is the fact that two potent greenhouse gases are consumed. In this regard, modeling is an important tool to understand and optimize plasma-assisted conversion of biogas. The primary goal of this work is to perform a comprehensive statistical study that quantifies the influence of uncertain rate constants thereby determining the key reaction pathways. A 0-D chemical kinetics solver in the OpenFOAM suite is used to perform a series of simulations to propagate the uncertainty in rate constants and the resulting mean and standard deviation of outcomes.

  7. [Microbiological and biological methods of the European Pharmacopoeia. Relevant for each medicinal product].

    Science.gov (United States)

    Norwig, J

    2014-10-01

    According to the EU Directive 2001/83 the European Pharmacopoeia is the official Pharmacopoeia of the European Union. Therefore the European Pharmacopoeia is one of the legal pharmacopoeial compendia in Germany. Any licensed medicinal product on the German market complies with the requirements of the compendial monographs, if applicable. Because the general monographs of the European Pharmacopoeia on Dosage Forms, Substances for Pharmaceutical Use and Pharmaceutical Preparations refer to the microbiological and biological methods of the Pharmacopoeia, the methods are relevant for medicinal products, too. This article presents a rough summary of the microbiological and biological methods of the European Pharmacopoeia and is intended to be a stimulus for the reader to better understand the original compendia. The short description of the methods mentioned, here, is a summary from the Pharmacopoeia and the non-official collection of comments on the texts of the European Pharmacopoeia.

  8. A Prospective Study of Platelet-Rich Plasma as Biological Augmentation for Acute Achilles Tendon Rupture Repair

    Directory of Open Access Journals (Sweden)

    Jian Zou

    2016-01-01

    Full Text Available Acute Achilles tendon rupture is one of the most common tendon injuries in adults. We hypothesized that Platelet-Rich Plasma (PRP can be used as biological augmentation for surgical treatment of acute Achilles tendon rupture. Our study is a prospective randomized controlled trial. Patients with acute Achilles tendon rupture undergoing surgical repair were randomly assigned into either control group or PRP group. End-to-end modified Krackow suture was performed in both groups. In the PRP group, PRP was injected into the paratenon sheath and around the ruptured tissue after the tendon was repaired. Postoperatively we evaluated isokinetic muscle strength at 3, 6, 12, and 24 months. In addition, ankle ROM, calf circumference, Leppilahti score, and the SF-36 score were evaluated at 6, 12, and 24 months after operation. At 3 months, the PRP group had better isokinetic muscle. The PRP group also achieved higher SF-36 and Leppilahti scores at 6 and 12 months. At 24 months, the PRP group had an improved ankle range of motion compared to the control group. Our study results suggest that PRP can serve as a biological augmentation to acute Achilles tendon rupture repair and improves both short and midterm functional outcomes.

  9. A Prospective Study of Platelet-Rich Plasma as Biological Augmentation for Acute Achilles Tendon Rupture Repair.

    Science.gov (United States)

    Zou, Jian; Mo, Xiaolian; Shi, Zhongmin; Li, Tanzhu; Xue, Jianfeng; Mei, Guohua; Li, Xiaolin

    2016-01-01

    Acute Achilles tendon rupture is one of the most common tendon injuries in adults. We hypothesized that Platelet-Rich Plasma (PRP) can be used as biological augmentation for surgical treatment of acute Achilles tendon rupture. Our study is a prospective randomized controlled trial. Patients with acute Achilles tendon rupture undergoing surgical repair were randomly assigned into either control group or PRP group. End-to-end modified Krackow suture was performed in both groups. In the PRP group, PRP was injected into the paratenon sheath and around the ruptured tissue after the tendon was repaired. Postoperatively we evaluated isokinetic muscle strength at 3, 6, 12, and 24 months. In addition, ankle ROM, calf circumference, Leppilahti score, and the SF-36 score were evaluated at 6, 12, and 24 months after operation. At 3 months, the PRP group had better isokinetic muscle. The PRP group also achieved higher SF-36 and Leppilahti scores at 6 and 12 months. At 24 months, the PRP group had an improved ankle range of motion compared to the control group. Our study results suggest that PRP can serve as a biological augmentation to acute Achilles tendon rupture repair and improves both short and midterm functional outcomes.

  10. [Biologic age as a criterion for work evaluation (exemplified by titanium alloys production)].

    Science.gov (United States)

    Afanas'eva, R F; Prokopenko, L V

    2009-01-01

    The article deals with results of studies concerning biologic age of workers (males) under occupational hazards of titanium alloys (jeopardy classes 3.3, 3.4.4) in Verkhne-Saldinsky metallurgic production association. Based on mathematic statistic analysis, the authors worked out an equation of multiple regression for ageing pace to forecast the ageing with consideration of age, length of service, occupation. The authors determined occupational groups characterized by premature ageing and increased risk of health disorders.

  11. Is the biological productivity in the Bay of Bengal light limited?

    Digital Repository Service at National Institute of Oceanography (India)

    PrasannaKumar, S.; Narvekar, J.; Nuncio, M.; Kumar, A.; Ramaiah, N.; Sardessai, S.; Gauns, M.; Fernandes, V.; Paul, J.

    of river influx and eddy- pumping. In addition to turbidity-driven reduction in the light penetration in the northern BOB, cloud cover could also reduce the availability of light for photosynthesis. Since the BOB comes under the summer monsoon regime... in the northern bay overwhelms that of cloud-cover in curtailing the availability of light for photosynthesis. Summary and conclusions The BOB is traditionally considered to be biologically a less productive basin compared to its western counterpart...

  12. Production of coloured glass-ceramics from incinerator ash using thermal plasma technology.

    Science.gov (United States)

    Cheng, T W; Huang, M Z; Tzeng, C C; Cheng, K B; Ueng, T H

    2007-08-01

    Incineration is a major treatment process for municipal solid waste in Taiwan. It is estimated that over 1.5 Mt of incinerator ash are produced annually. This study proposes using thermal plasma technology to treat incinerator ash. Sintered glass-ceramics were produced using quenched vitrified slag with colouring agents added. The experimental results showed that the major crystalline phases developed in the sintered glass-ceramics were gehlenite and wollastonite, but many other secondary phases also appeared depending on the colouring agents added. The physical/mechanical properties, chemical resistance and toxicity characteristic leaching procedure of the coloured glass-ceramics were satisfactory. The glass-ceramic products obtained from incinerator ash treated with thermal plasma technology have great potential for building applications.

  13. Fungi as chemical industries and genetic engineering for the production of biologically active secondary metabolites

    Institute of Scientific and Technical Information of China (English)

    Abid; Ali; Khan; Nafees; Bacha; Bashir; Ahmad; Ghosia; Lutfullah; Umar; Farooq; Russell; John; Cox

    2014-01-01

    Fungi is somewhere in between the micro and macro organisms which is a good source of producing biologically active secondary metabolites.Fungi have been used as tool for producing different types of secondary metabolites by providing different nutrients at different laboratory conditions.The fungi have been engineered for the desired secondary metabolites by using different laboratory techniques,for example,homologous and heterologous expressions.This review reported how the fungi are used as chemical industry for the production of secondary metabolites and how they are engineered in laboratory for the production of desirable metabolites:also the biosynthetic pathways of the bio-organic-molecules were reported.

  14. Downstream process for production of a viable and stable Bacillus cereus aquaculture biological agent

    CSIR Research Space (South Africa)

    Lalloo, R

    2010-03-01

    Full Text Available reticulated 56aquaculture due to dwindling natural reserves, we devel- 57oped a novel downstream process for our Bacillus cereus 58(NRRL 100132) biological agent which resulted in a spore 59product suitable for aquaculture application, by minimising 60the...; Setlow and Setlow 1995). High 450recovery in drying could also be attributed to adhesion of B. Fig. 3 Viability of product intermediates a spore concentrate and b powder blend at different temperatures Appl Microbiol Biotechnol JrnlID 253_Art...

  15. Fungi as chemical industries and genetic engineering for the production of biologically active secondary metabolites

    Institute of Scientific and Technical Information of China (English)

    Abid Ali Khan; Nafees Bacha; Bashir Ahmad; Ghosia Lutfullah; Umar Farooq; Russell John Cox

    2014-01-01

    Fungi is somewhere in between the micro and macro organisms which is a good source of producing biologically active secondary metabolites. Fungi have been used as tool for producing different types of secondary metabolites by providing different nutrients at different laboratory conditions. The fungi have been engineered for the desired secondary metabolites by using different laboratory techniques, for example, homologous and heterologous expressions. This review reported how the fungi are used as chemical industry for the production of secondary metabolites and how they are engineered in laboratory for the production of desirable metabolites;also the biosynthetic pathways of the bio-organic-molecules were reported.

  16. Final Report of “Collaborative research: Fundamental science of low temperature plasma-biological material interactions” (Award# DE-SC0005105)

    Energy Technology Data Exchange (ETDEWEB)

    Oehrlein, Gottlieb S. [Univ. of Maryland, College Park, MD (United States); Seog, Joonil [Univ. of Maryland, College Park, MD (United States); Graves, David [Univ. of California, Berkeley, CA (United States); Chu, J. -W. [Univ. of California, Berkeley, CA (United States)

    2014-09-24

    Low temperature plasma (LTP) treatment of biological tissue is a promising path toward sterilization of bacteria due to its versatility and ability to operate under well-controlled and relatively mild conditions. The present collaborative research of an interdisciplinary team of investigators at University of Maryland, College Park (UMD), and University of California, Berkeley (UCB) focused on establishing our knowledge on low temperature plasma-induced chemical modifications in biomolecules that result in inactivation due to various plasma species, including ions, reactive radicals, and UV/VUV photons. The overall goals of the project were to identify the mechanisms by which low and atmospheric pressure plasma (APP) deactivates endotoxic biomolecules. Additionally, we wanted to understand how deactivation processes depend on the interaction of APP with the environment. Various low pressure plasma sources, a vacuum beam system and several atmospheric pressure plasma sources were used to accomplish these objectives. In our work we elucidated for the first time the role of ions, VUV photons and radicals in biological deactivation of model endotoxic biomolecules, both in a UHV beam system and an inductively coupled, low pressure plasma system, and established the associated atomistic modifications in biomolecules. While we showed that both ions and VUV photons can be very efficient in deactivation of biomolecules, significant etching and/or deep modification (~200 nm) were accompanied by these biological effects. One of the most important findings in this work is that the significant deactivation and surface modification can occur with minimal etching using radical species. However, if radical fluxes and corresponding etch rates are relatively high, for example, at atmospheric pressure, inactivation of endotoxic biomolecule film may require near-complete removal of the film. These findings motivated further work at atmospheric pressure using several types of low

  17. The potential of plants as a system for the development and production of human biologics

    Science.gov (United States)

    Chen, Qiang; Davis, Keith R.

    2016-01-01

    The growing promise of plant-made biologics is highlighted by the success story of ZMapp™ as a potentially life-saving drug during the Ebola outbreak of 2014-2016. Current plant expression platforms offer features beyond the traditional advantages of low cost, high scalability, increased safety, and eukaryotic protein modification. Novel transient expression vectors have been developed that allow the production of vaccines and therapeutics at unprecedented speed to control potential pandemics or bioterrorism attacks. Plant-host engineering provides a method for producing proteins with unique and uniform mammalian post-translational modifications, providing opportunities to develop biologics with increased efficacy relative to their mammalian cell-produced counterparts. Recent demonstrations that plant-made proteins can function as biocontrol agents of foodborne pathogens further exemplify the potential utility of plant-based protein production. However, resolving the technical and regulatory challenges of commercial-scale production, garnering acceptance from large pharmaceutical companies, and obtaining U.S. Food and Drug Administration approval for several major classes of biologics are essential steps to fulfilling the untapped potential of this technology. PMID:27274814

  18. The potential of plants as a system for the development and production of human biologics.

    Science.gov (United States)

    Chen, Qiang; Davis, Keith R

    2016-01-01

    The growing promise of plant-made biologics is highlighted by the success story of ZMapp™ as a potentially life-saving drug during the Ebola outbreak of 2014-2016. Current plant expression platforms offer features beyond the traditional advantages of low cost, high scalability, increased safety, and eukaryotic protein modification. Novel transient expression vectors have been developed that allow the production of vaccines and therapeutics at unprecedented speed to control potential pandemics or bioterrorism attacks. Plant-host engineering provides a method for producing proteins with unique and uniform mammalian post-translational modifications, providing opportunities to develop biologics with increased efficacy relative to their mammalian cell-produced counterparts. Recent demonstrations that plant-made proteins can function as biocontrol agents of foodborne pathogens further exemplify the potential utility of plant-based protein production. However, resolving the technical and regulatory challenges of commercial-scale production, garnering acceptance from large pharmaceutical companies, and obtaining U.S. Food and Drug Administration approval for several major classes of biologics are essential steps to fulfilling the untapped potential of this technology.

  19. Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals

    DEFF Research Database (Denmark)

    Jullesson, David; David, Florian; Pfleger, Brian

    2015-01-01

    Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played...... an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine...... chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes....

  20. Impact of synthetic biology and metabolic engineering on industrial production of fine chemicals.

    Science.gov (United States)

    Jullesson, David; David, Florian; Pfleger, Brian; Nielsen, Jens

    2015-11-15

    Industrial bio-processes for fine chemical production are increasingly relying on cell factories developed through metabolic engineering and synthetic biology. The use of high throughput techniques and automation for the design of cell factories, and especially platform strains, has played an important role in the transition from laboratory research to industrial production. Model organisms such as Saccharomyces cerevisiae and Escherichia coli remain widely used host strains for industrial production due to their robust and desirable traits. This review describes some of the bio-based fine chemicals that have reached the market, key metabolic engineering tools that have allowed this to happen and some of the companies that are currently utilizing these technologies for developing industrial production processes. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Development of GRAS strains for nutraceutical production using systems and synthetic biology approaches: advances and prospects.

    Science.gov (United States)

    Liu, Long; Guan, Ningzi; Li, Jianghua; Shin, Hyun-Dong; Du, Guocheng; Chen, Jian

    2017-03-01

    Nutraceuticals are food substances with medical and health benefits for humans. Limited by complicated procedures, high cost, low yield, insufficient raw materials, resource waste, and environment pollution, chemical synthesis and extraction are being replaced by microbial synthesis of nutraceuticals. Many microbial strains that are generally regarded as safe (GRAS) have been identified and developed for the synthesis of nutraceuticals, and significant nutraceutical production by these strains has been achieved. In this review, we systematically summarize recent advances in nutraceutical research in terms of physiological effects on health, potential applications, drawbacks of traditional production processes, characteristics of production strains, and progress in microbial fermentation. Recent advances in systems and synthetic biology techniques have enabled comprehensive understanding of GRAS strains and its wider applications. Thus, these microbial strains are promising cell factories for the commercial production of nutraceuticals.

  2. Microbial production of amino acids and derived chemicals: synthetic biology approaches to strain development.

    Science.gov (United States)

    Wendisch, Volker F

    2014-12-01

    Amino acids are produced at the multi-million-ton-scale with fermentative production of l-glutamate and l-lysine alone being estimated to amount to more than five million tons in the year 2013. Metabolic engineering constantly improves productivities of amino acid producing strains, mainly Corynebacterium glutamicum and Escherichia coli strains. Classical mutagenesis and screening have been accelerated by combination with intracellular metabolite sensing. Synthetic biology approaches have allowed access to new carbon sources to realize a flexible feedstock concept. Moreover, new pathways for amino acid production as well as fermentative production of non-native compounds derived from amino acids or their metabolic precursors were developed. These include dipeptides, α,ω-diamines, α,ω-diacids, keto acids, acetylated amino acids and ω-amino acids.

  3. Construction of a microbial natural product library for chemical biology studies.

    Science.gov (United States)

    Kato, Naoki; Takahashi, Shunji; Nogawa, Toshihiko; Saito, Tamio; Osada, Hiroyuki

    2012-04-01

    The RIKEN Natural Products Depository (NPDepo) is a public depository of small molecules. Currently, the NPDepo chemical library contains 39,200 pure compounds, half of which are natural products and their derivatives. In order to reinforce the uniqueness of our chemical library, we have improved our strategies for the collection of microbial natural products. Firstly, a microbial metabolite fraction library coupled with an MP (microbial products) plot database provides a powerful resource for the efficient isolation of microbial metabolites. Secondly, biosynthetic studies of microbial metabolites have enabled us to not only access ingenious biosynthetic machineries, but also obtain a variety of biosynthetic intermediates. Our chemical library contributes to the discovery of molecular probes for increasing our understanding of complex biological processes and for eventually developing new drug leads.

  4. Potential of chicken by-products as sources of useful biological resources

    Energy Technology Data Exchange (ETDEWEB)

    Lasekan, Adeseye [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Abu Bakar, Fatimah, E-mail: fatim@putra.upm.edu.my [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Hashim, Dzulkifly [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia)

    2013-03-15

    By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.

  5. Current good manufacturing practice in plant automation of biological production processes.

    Science.gov (United States)

    Dorresteijn, R C; Wieten, G; van Santen, P T; Philippi, M C; de Gooijer, C D; Tramper, J; Beuvery, E C

    1997-01-01

    The production of biologicals is subject to strict governmental regulations. These are drawn up in current good manufacturing practices (cGMP), a.o. by the U.S. Food and Drug Administration. To implement cGMP in a production facility, plant automation becomes an essential tool. For this purpose Manufacturing Execution Systems (MES) have been developed that control all operations inside a production facility. The introduction of these recipe-driven control systems that follow ISA S88 standards for batch processes has made it possible to implement cGMP regulations in the control strategy of biological production processes. Next to this, an MES offers additional features such as stock management, planning and routing tools, process-dependent control, implementation of software sensors and predictive models, application of historical data and on-line statistical techniques for trend analysis and detection of instrumentation failures. This paper focuses on the development of new production strategies in which cGMP guidelines are an essential part.

  6. Mimicking/extracting structure and functions of natural products: synthetic approaches that address unexplored needs in chemical biology.

    Science.gov (United States)

    Hirai, Go

    2015-04-01

    Natural products are often attractive and challenging targets for synthetic chemists, and many have interesting biological activities. However, synthetic chemists need to be more than simply suppliers of compounds to biologists. Therefore, we have been seeking ways to actively apply organic synthetic methods to chemical biology studies of natural products and their activities. In this personal review, I would like to introduce our work on the development of new biologically active compounds inspired by, or extracted from, the structures of natural products, focusing on enhancement of functional activity and specificity and overcoming various drawbacks of the parent natural products.

  7. Upgrade of the IGN-14 neutron generator for research on detection of fusion-plasma products

    Energy Technology Data Exchange (ETDEWEB)

    Igielski, Andrzej; Kurowski, Arkadiusz; Janik, Władysław; Gabańska, Barbara; Woźnicka, Urszula, E-mail: Urszula.Woznicka@ifj.edu.pl

    2015-10-11

    The fast neutron generator (IGN-14) at the Institute of Nuclear Physics of the Polish Academy of Sciences (IFJ PAN) in Kraków (Poland) is a laboratory multi-purpose experimental device. Neutrons are produced in a beam-target D–D or D–T reactions. A new vacuum chamber installed directly to the end of the ion guide of IGN-14 makes it possible to measure not only neutrons but also alpha particles in the presence of a mixed radiation field of other accompanying reaction products. The new experimental setup allows test detectors dedicated to spectrometric measurements of thermonuclear fusion reaction products. - Highlights: • Nuclear reactions at the target correspond to the fusion reaction in hot plasma. • Measuring vacuum chamber has been built and installed. • Spatial distribution of the particle mixed fields in chamber was calculated. • New experimental setup for tests of detectors dedicated to measure of fusion reaction products.

  8. Oxygen bomb combustion of biological samples for inductively coupled plasma optical emission spectrometry

    Science.gov (United States)

    Souza, Gilberto B.; Carrilho, Elma Neide V. M.; Oliveira, Camila V.; Nogueira, Ana Rita A.; Nóbrega, Joaquim A.

    2002-12-01

    A rapid sample preparation method is proposed for decomposition of milk powder, corn bran, bovine and fish tissues, containing certified contents of the analytes. The procedure involves sample combustion in a commercial stainless steel oxygen bomb operating at 25 bar. Most of the samples were decomposed within 5 min. Diluted nitric acid or water-soluble tertiary amines 10% v/v were used as absorption solutions. Calcium, Cu, K, Mg, Na, P, S and Zn were recovered with the bomb washings and determined by inductively coupled plasma optical emission spectrometry (ICP-OES). Ethanol mixed with paraffin was used as a combustion aid to allow complete combustion. A cooling step prior releasing of the bomb valve was employed to increase the efficiency of sample combustion. Iodine was also determined in milk samples spiked with potassium iodide to evaluate the volatilization and collection of iodine in amine CFA-C medium and the feasibility of its determination by ICP-OES with axial view configuration. Most of the element recoveries in the samples were between 91 and 105% and the certified and found contents exhibited a fair agreement at a 95% confidence level.

  9. Vitamin C conjugates of genotoxic lipid peroxidation products: Structural characterization and detection in human plasma

    OpenAIRE

    Sowell, John; Frei, Balz; Stevens, Jan F.

    2004-01-01

    α,β-Unsaturated aldehydes such as 4-hydroxy-2-nonenal (HNE) and other electrophilic lipid peroxidation (LPO) products may contribute to the pathogenesis of cancer, cardiovascular diseases, and other age-related diseases by cytotoxic, genotoxic, and proinflammatory mechanisms. The notion that vitamin C (ascorbic acid) acts as a biological antioxidant has been challenged recently by an in vitro study showing that ascorbic acid promotes, rather than inhibits, the formation of genotoxic LPO produ...

  10. Cold atmospheric pressure plasma treatment of ready-to-eat meat: Inactivation of Listeria innocua and changes in product quality

    DEFF Research Database (Denmark)

    Rød, Sara Katrine; Hansen, Flemming; Leipold, Frank

    2012-01-01

    The application of cold atmospheric pressure plasma for decontamination of a sliced ready-to-eat (RTE) meat product (bresaola) inoculated with Listeria innocua was investigated. Inoculated samples were treated at 15.5, 31, and 62 W for 2–60 s inside sealed linear-low-density-polyethylene bags...... the sensory threshold level. Surface colour changes included loss of redness of ∼40% and 70% after 1 and 14 days of storage, respectively, regardless of plasma treatment. The results indicate that plasma may be applicable in surface decontamination of pre-packed RTE food products. However, oxidation may...

  11. Modifying the fatty acid profile of dairy products through feedlot technology lowers plasma cholesterol of humans consuming the products.

    Science.gov (United States)

    Noakes, M; Nestel, P J; Clifton, P M

    1996-01-01

    Intake of milk and butter has been clearly associated with higher coronary heart disease rates in different countries and this is likely to be mediated by the hypercholesterolemic effect of dairy fat. Fat-modified dairy products are an innovation involving a technology in which protected unsaturated lipids are fed to ruminants resulting in milk and tissue lipids with reduced saturated fatty acids. We examined the impact of these novel dairy fats on plasma lipids in a human dietary trial. Thirty-three men and women participated in an 8-wk randomized crossover trial comparing fat-modified with conventional dairy products. The trial consisted of a 2-wk low-fat baseline period followed by two 3-wk intervention phases. During the test periods, the fat-modified products resulted in a significant 0.28-mmol/L (4.3%) lowering of total cholesterol (P dairy products, if applied to populations typical of developed Western countries, represents a potential strategy to lower the risk of coronary heart disease without any appreciable change in customary eating patterns.

  12. Validation of Alzheimer's disease CSF and plasma biological markers: the multicentre reliability study of the pilot European Alzheimer's Disease Neuroimaging Initiative (E-ADNI)

    DEFF Research Database (Denmark)

    Buerger, Katharina; Frisoni, Giovanni; Uspenskaya, Olga

    2009-01-01

    BACKGROUND: Alzheimer's Disease Neuroimaging Initiatives ("ADNI") aim to validate neuroimaging and biochemical markers of Alzheimer's disease (AD). Data of the pilot European-ADNI (E-ADNI) biological marker programme of cerebrospinal fluid (CSF) and plasma candidate biomarkers are reported. METHODS...

  13. Hydrogen and Carbon Black Production from the Degradation of Methane by Thermal Plasma

    Directory of Open Access Journals (Sweden)

    Leila Cottet

    2014-05-01

    Full Text Available Methane gas (CH4 is the main inducer of the so called greenhouse gases effect. Recent scientific research aims to minimize the accumulation of this gas in the atmosphere and to develop processes capable of producing stable materials with added value. Thermal plasma technology is a promising alternative to these applications, since it allows obtaining H2 and solid carbon from CH4, without the parallel formation of byproducts such as CO2 and NOx. In this work, CH4 was degraded by thermal plasma in order to produce hydrogen (H2 and carbon black. The degradation efficiency of CH4, selectivity for H2 production as well as the characterization of carbon black were studied. The best results were obtained in the CH4 flow rate of 5 L min-1 the degradation percentage and the selectivity for H2 production reached 98.8 % and 48.4 %, respectively. At flow rates of less than 5 L min-1 the selectivity for H2 production increases and reaches 91.9 %. The carbon black has obtained amorphous with hydrophobic characteristics and can be marketed to be used in composite material, and can also be activated chemically and/or physically and used as adsorbent material.

  14. Syngas production from tar reforming by microwave plasma jet at atmospheric pressure: power supplied influence

    Science.gov (United States)

    de Souza Medeiros, Henrique; Justiniano, Lucas S.; Gomes, Marcelo P.; Soares da Silva Sobrinho, Argemiro; Petraconi Filho, Gilberto

    2013-09-01

    Now a day, scientific community is searching for new fuels able to replace fossil fuels with economic and environment gains and biofuel play a relevant rule, mainly for the transport sector. A major process to obtaining such type of renewable resource is biomass gasification. This process has as product a gas mixture containing CO, CH4, and H2 which is named synthesis gas (syngas). However, an undesirable high molecular organic species denominated tar are also produced in this process which must be removed. In this work, results of syngas production via tar reforming in the atmospheric pressure microwave discharge having as parameter the power supply. Argon, (argon + ethanol), and (argon + tar solution) plasma jet were produced by different values of power supplied (from 0.5 KW to 1.5 KW). The plasma compounds were investigated by optical spectroscopy to each power and gas composition. The main species observed in the spectrum are Ar, CN, OII, OIV, OH, H2, H(beta), CO2, CO, and SIII. This last one came from tar. The best value of the power applied to syngas production from tar reforming was verified between 1.0 KW and 1.2 KW. We thank the following institutions for financial support: CNPq, CAPES, and FAPESP.

  15. Imaging of Selenium by Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) in 2-D Electrophoresis Gels and Biological Tissues.

    Science.gov (United States)

    Cruz, Elisa Castañeda Santa; Susanne Becker, J; Sabine Becker, J; Sussulini, Alessandra

    2018-01-01

    Selenium and selenoproteins are important components of living organisms that play a role in different biological processes. Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is a powerful analytical technique that has been employed to obtain distribution maps of selenium in biological tissues in a direct manner, as well as in selenoproteins, previously separated by their molecular masses and isoelectric points using two-dimensional polyacrylamide gel electrophoresis (2-D PAGE). In this chapter, we present the protocols to perform LA-ICP-MS imaging experiments, allowing the distribution visualization and determination of selenium and/or selenoproteins in biological systems.

  16. Fabrication and physical and biological properties of fibrin gel derived from human plasma.

    Science.gov (United States)

    Zhao, Haiguang; Ma, Lie; Zhou, Jie; Mao, Zhengwei; Gao, Changyou; Shen, Jiacong

    2008-03-01

    The fast development of tissue engineering and regenerative medicine drives the old biomaterials, for example, fibrin glue, to find new applications in these areas. Aiming at developing a commercially available hydrogel for cell entrapment and delivery, in this study we optimized the fabrication and gelation conditions of fibrin gel. Fibrinogen was isolated from human plasma by a freeze-thaw circle. Gelation of the fibrinogen was accomplished by mixing with thrombin. Absorbance of the fibrinogen/thrombin mixture at 550 nm as a function of reaction time was monitored by UV-VIS spectroscopy. It was found that the clotting time is significantly influenced by the thrombin concentration and the temperature, while less influenced by the fibrinogen concentration. After freeze-drying, the fibrin gel was characterized by scanning electron microscopy (SEM), revealing fibrous microstructure. Thermal gravimetric analysis found that the degradation temperature of the crosslinked fibrin gel starts from 288 degrees C, which is about 30 degrees C higher than that of the fibrinogen. The hydrogel has an initial water-uptake ratio of approximately 50, decreased to 30-40 after incubation in water for 11 h depending on the thrombin concentration. The fibrin gels lost their weights in PBS very rapidly, while slowly in DMEM/fetal bovine serum and DMEM. In vitro cell culture found that human fibroblasts could normally proliferate in the fibrin gel with spreading morphology. In conclusion, the fibrin gel containing higher concentration of fibrinogen (20 mg ml(-1)) and thrombin (5 U ml(-1)) has suitable gelation time and handling properties, and thus is applicable as a delivery vehicle for cells such as fibroblasts.

  17. A synthetic biology approach to self-regulatory recombinant protein production in Escherichia coli

    Directory of Open Access Journals (Sweden)

    Dragosits Martin

    2012-03-01

    Full Text Available Abstract Background Recombinant protein production is a process of great industrial interest, with products that range from pharmaceuticals to biofuels. Since high level production of recombinant protein imposes significant stress in the host organism, several methods have been developed over the years to optimize protein production. So far, these trial-and-error techniques have proved laborious and sensitive to process parameters, while there has been no attempt to address the problem by applying Synthetic Biology principles and methods, such as integration of standardized parts in novel synthetic circuits. Results We present a novel self-regulatory protein production system that couples the control of recombinant protein production with a stress-induced, negative feedback mechanism. The synthetic circuit allows the down-regulation of recombinant protein expression through a stress-induced promoter. We used E. coli as the host organism, since it is widely used in recombinant processes. Our results show that the introduction of the self-regulatory circuit increases the soluble/insoluble ratio of recombinant protein at the expense of total protein yield. To further elucidate the dynamics of the system, we developed a computational model that is in agreement with the observed experimental data, and provides insight on the interplay between protein solubility and yield. Conclusion Our work introduces the idea of a self-regulatory circuit for recombinant protein products, and paves the way for processes with reduced external control or monitoring needs. It demonstrates that the library of standard biological parts serves as a valuable resource for initial synthetic blocks that needs to be further refined to be successfully applied in practical problems of biotechnological significance. Finally, the development of a predictive model in conjunction with experimental validation facilitates a better understanding of the underlying dynamics and can be

  18. 21 CFR 640.64 - Collection of blood for Source Plasma.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Collection of blood for Source Plasma. 640.64... (CONTINUED) BIOLOGICS ADDITIONAL STANDARDS FOR HUMAN BLOOD AND BLOOD PRODUCTS Source Plasma § 640.64 Collection of blood for Source Plasma. (a) Supervision. All blood for the collection of Source Plasma shall...

  19. Parameterization of x-ray production in laser-produced plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Peek, J.M.

    1980-10-01

    A simple and algebraically tractable model is developed for the efficiency of x-ray production in a certain spectral region by laser driven plasmas. The model is used as a interpolation/extrapolation device for experimental and theoretical results from three different target concepts. These tests indicate that it is of use in its intended capacity. Certain relationships between independent parameters and scaling laws also result from this construction. Most notable among these is the prediction that the efficiency for producing line radiation in a certain narrow energy range scales like the inverse square of this energy.

  20. Plasma assisted fuel reforming for on-board hydrogen rich gas production

    OpenAIRE

    Darmon, Adeline; Rollier, Jean-Damien; Duval, Emmanuelle; Gonzalez-Aguilar, Jose; Metkemeijer, Rudolf; Fulcheri, Laurent

    2006-01-01

    Texte disponible en suivant le lien ci-dessous : http://www.cder.dz/A2H2/Medias/Download/Proc%20PDF/PARALLEL%20SESSIONS/%5BS06%5D%20Production%20-%20Hydrocarbons/14-06-06/162.pdf; International audience; Plasma assisted fuel reforming technology appears particularly attractive for automotive applications, especially regarding compactness, response time and absence of catalyst element. In 2003, Renault and CEP have initiated a research programme on this subject. A test bench allowing reformer ...

  1. Chemical Equilibration and Dilepton Production of Quark-Gluon Plasma at RHIC Energies

    Institute of Scientific and Technical Information of China (English)

    龙家丽; 贺泽君; 马国亮; 马余刚; 刘波

    2004-01-01

    An evolution model of the chemically equilibrating quark-gluon plasma system has been established based on the Jiittner distribution function of partons. By studying the dilepton production of the system, we find that due to high initial temperature, large gluon density of the system as well as large gluon fusion gg → c(c-) cross section in the intermediate mass region, a dominant contribution to dileptons with intermediate masses is provided by quark-antiquark annihilation qq → l(l-) and, especially, thermal charmed quarks from the gluon fusion gg → c(c-) and quark-antiquark annihilation qq → c(c-).

  2. Evolution of the biological productivity during the last deglaciations using the triple isotopic composition of oxygen

    Science.gov (United States)

    Favre, Violaine; Extier, Thomas; Landais, Amaelle; Kageyama, Masa; Bopp, Laurent; Blunier, Thomas; Duchamp-Alphonse, Stéphanie; Masson-Delmotte, Valérie

    2017-04-01

    The last deglaciation is probably the best documented large climatic changes of the Quaternary. It is associated with global temperature increases of 4-5°C, significant increase of the sea level by 120 m and an increase in atmospheric CO2 concentration by 80 ppm. Understanding the combination of biochemical and physical factors responsible for this 80 ppm increase and the link with climate change is essential in the current evolution of greenhouse gases concentration. Biological productivity plays a role in the change of CO2 concentration during the last deglaciation. However, the lack of direct and global tracers of biological productivity makes it difficult to quantify and date the global change of productivity over the last deglaciation. Here, we use the triple isotopic composition of oxygen (δ17O of O2) over the last deglaciation obtained with a 300 years resolution on the NEEM ice core to depict the change of global productivity on this period. δ17O of O2 is indeed responding to the variations of O2 flux from the biosphere albeit in a complex manner. To help its interpretation, we thus combine these measurements with O2 fluxes obtained from the coupled climate model of IPSL over the last deglaciation. Finally, we compare the dynamic and amplitude of the δ17O of O2 change over the last deglaciation with variations obtained on previous deglaciations using new δ17O of O2 data obtained from the Dome C ice core.

  3. Laser-initiated decomposition products of indocyanine green (ICG) and carbon black sensitized biological tissues

    Science.gov (United States)

    Kokosa, John M.; Przyjazny, Andrzej; Bartels, Kenneth E.; Motamedi, Massoud; Hayes, Donald J.; Wallace, David B.; Frederickson, Christopher J.

    1997-05-01

    Organic dyes have found increasing use a s sensitizers in laser surgical procedures, due to their high optical absorbances. Little is known, however, about the nature of the degradation products formed when these dyes are irradiated with a laser. Previous work in our laboratories has shown that irradiation of polymeric and biological tissues with CO2 and Nd:YAG lasers produces a host of volatile and semivolatile by-products, some of which are known to be potential carcinogens. This work focuses on the identification of the chemical by-products formed by diode laser and Nd:YAG laser irradiation of indocyanine green (ICG) and carbon black based ink sensitized tissues, including bone, tendon and sheep's teeth. Samples were mounted in a 0.5-L Pyrex sample chamber equipped with quartz optical windows, charcoal filtered air inlet and an outlet attached to an appropriate sample trap and a constant flow pump. By-products were analyzed by GC/MS and HPLC. Volatiles identified included benzene and formaldehyde. Semi-volatiles included traces of polycyclic aromatics, arising from the biological matrix and inks, as well as fragments of ICG and the carbon ink components. The significance of these results will be discussed, including the necessity of using appropriate evacuation devices when utilizing lasers for surgical procedures.

  4. Biological Pretreatment of Rubberwood with Ceriporiopsis subvermispora for Enzymatic Hydrolysis and Bioethanol Production

    Directory of Open Access Journals (Sweden)

    Forough Nazarpour

    2013-01-01

    Full Text Available Rubberwood (Hevea brasiliensis, a potential raw material for bioethanol production due to its high cellulose content, was used as a novel feedstock for enzymatic hydrolysis and bioethanol production using biological pretreatment. To improve ethanol production, rubberwood was pretreated with white rot fungus Ceriporiopsis subvermispora to increase fermentation efficiency. The effects of particle size of rubberwood (1 mm, 0.5 mm, and 0.25 mm and pretreatment time on the biological pretreatment were first determined by chemical analysis and X-ray diffraction and their best condition obtained with 1 mm particle size and 90 days pretreatment. Further morphological study on rubberwood with 1 mm particle size pretreated by fungus was performed by FT-IR spectra analysis and SEM observation and the result indicated the ability of this fungus for pretreatment. A study on enzymatic hydrolysis resulted in an increased sugar yield of 27.67% as compared with untreated rubberwood (2.88%. The maximum ethanol concentration and yield were 17.9 g/L and 53% yield, respectively, after 120 hours. The results obtained demonstrate that rubberwood pretreated by C. subvermispora can be used as an alternative material for the enzymatic hydrolysis and bioethanol production.

  5. Nonthermal plasma reactors for the production of light hydrocarbon olefins from heavy oil

    Directory of Open Access Journals (Sweden)

    Prieto G.

    2003-01-01

    Full Text Available During the last decade, nonthermal plasma technology was applied in many different fields, focusing attention on the destruction of harmful compounds in the air. This paper deals with nonthermal plasma reactors for the conversion of heavy oil into light hydrocarbon olefins, to be employed as gasoline components or to be added in small amounts for the catalytic reduction of nitrogen oxide compounds in the treatment of exhaust gas at power plants. For the process, the plate-plate nonthermal plasma reactor driven by AC high voltage was selected. The reactor was modeled as a function of parameter characteristics, using the methodology provided by the statistical experimental design. The parameters studied were gap distance between electrodes, carrier gas flow and applied power. Results indicate that the reactions occurring in the process of heavy oil conversion have an important selective behavior. The products obtained were C1-C4 hydrocarbons with ethylene as the main compound. Operating the parameters of the reactor within the established operative window of the system and close to the optimum conditions, efficiencies as high as 70 (mul/joule were obtained. These values validate the process as an in-situ method to produce light olefins for the treatment of nitrogen oxides in the exhaust gas from diesel engines.

  6. Numerical Analysis of Microdischarge Oxygen Plasma and Prediction of Ozone Production Efficiency

    Science.gov (United States)

    Kawano, Satoyuki; Misaka, Takashi

    In this research, numerical simulation of oxygen plasma produced by dielectric barrier discharge (DBD) is made as a basic research for the application of bioprocesses such as sterilization. Numerical simulation is based on an appropriate modeling of microdischarges including 9 kinds of species and 54 chemical reactions. Behavior of the oxygen plasma is analyzed by finite difference method in two-dimensional computational region. The detailed characteristics of filamentous discharge formed between parallel dielectric surfaces which cover the electrodes are investigated. The qualitative tendency of the discharge formation process agrees with the previous experimental observation. Ozone production efficiency (OPE) is obtained and compared with experimental results. Dependency of reduced electric field E/n on OPE is investigated by comparing the numerical results with previous experimental results by other researcher, where E/n is the ratio of electric field EE to number density n of neutral molecule in the gas. It is confirmed that the present numerical simulation has practically enough accuracy for the evaluation of the OPE to optimize the oxygen plasma sterilization devices.

  7. Investigation of helium ion production in constricted direct current plasma ion source with layered-glows

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yuna [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Chung, Kyoung-Jae, E-mail: jkjlsh1@snu.ac.kr [Center for Advance Research in Fusion Reactor Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Park, Yeong-Shin [Samsumg Electronics Co. Ltd., Gyeonggi 445-701 (Korea, Republic of); Hwang, Y. S. [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Center for Advance Research in Fusion Reactor Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of)

    2014-02-15

    Generation of helium ions is experimentally investigated with a constricted direct current (DC) plasma ion source operated at layered-glow mode, in which electrons could be accelerated through multiple potential structures so as to generate helium ions including He{sup 2+} by successive ionization collisions in front of an extraction aperture. The helium discharge is sustained with the formation of a couple of stable layers and the plasma ball with high density is created near the extraction aperture at the operational pressure down to 0.6 Torr with concave cathodes. The ion beam current extracted with an extraction voltage of 5 kV is observed to be proportional to the discharge current and inversely proportional to the operating pressure, showing high current density of 130 mA/cm{sup 2} and power density of 0.52 mA/cm{sup 2}/W. He{sup 2+} ions, which were predicted to be able to exist due to multiple-layer potential structure, are not observed. Simple calculation on production of He{sup 2+} ions inside the plasma ball reveals that reduced operating pressure and increased cathode area will help to generate He{sup 2+} ions with the layered-glow DC discharge.

  8. A review of biological delignification and detoxification methods for lignocellulosic bioethanol production.

    Science.gov (United States)

    Moreno, Antonio D; Ibarra, David; Alvira, Pablo; Tomás-Pejó, Elia; Ballesteros, Mercedes

    2015-01-01

    Future biorefineries will integrate biomass conversion processes to produce fuels, power, heat and value-added chemicals. Due to its low price and wide distribution, lignocellulosic biomass is expected to play an important role toward this goal. Regarding renewable biofuel production, bioethanol from lignocellulosic feedstocks is considered the most feasible option for fossil fuels replacement since these raw materials do not compete with food or feed crops. In the overall process, lignin, the natural barrier of the lignocellulosic biomass, represents an important limiting factor in biomass digestibility. In order to reduce the recalcitrant structure of lignocellulose, biological pretreatments have been promoted as sustainable and environmentally friendly alternatives to traditional physico-chemical technologies, which are expensive and pollute the environment. These approaches include the use of diverse white-rot fungi and/or ligninolytic enzymes, which disrupt lignin polymers and facilitate the bioconversion of the sugar fraction into ethanol. As there is still no suitable biological pretreatment technology ready to scale up in an industrial context, white-rot fungi and/or ligninolytic enzymes have also been proposed to overcome, in a separated or in situ biodetoxification step, the effect of the inhibitors produced by non-biological pretreatments. The present work reviews the latest studies regarding the application of different microorganisms or enzymes as useful and environmentally friendly delignification and detoxification technologies for lignocellulosic biofuel production. This review also points out the main challenges and possible ways to make these technologies a reality for the bioethanol industry.

  9. Studies of the Production of Fungal Polyketides in Aspergillus nidulans by Using Systems Biology Tools

    DEFF Research Database (Denmark)

    Panagiotou, Gianni; Andersen, Mikael Rørdam; Grotkjær, Thomas

    2009-01-01

    are virtually unlimited, and it is thus of great interest to develop a well-described microbial production platform for polyketides. Using genetic engineering tools available for the model organism Aspergillus nidulans, we constructed two recombinant strains, one expressing the Penicillium griseofulvum 6...... that overexpression of xpkA does not directly improve 6-MSA production on glucose, but it is possible, if the metabolic flux through the lower part of glycolysis is reduced, to obtain quite high yields for conversion of sugar to 6-MSA. Systems biology tools were employed for in-depth analysis of the metabolic...... characterized on glucose, xylose, glycerol, and ethanol media in controlled bioreactors. Glucose was found to be the preferred carbon source for 6-MSA production, and 6-MSA concentrations up to 455 mg/liter were obtained for the recombinant strain harboring the 6-MSA gene. Our findings indicate...

  10. A regulatory perspective of clinical trial applications for biological products with particular emphasis on Advanced Therapy Medicinal Products (ATMPs).

    Science.gov (United States)

    Jones, David R; McBlane, James W; McNaughton, Graham; Rajakumaraswamy, Nishanthan; Wydenbach, Kirsty

    2013-08-01

    The safety of trial subjects is the tenet that guides the regulatory assessment of a Clinical Trial Authorization application and applies equally to trials involving small molecules and those with biological/biotechnological products, including Advanced Therapy Medicinal Products. The objective of a regulator is to ensure that the potential risk faced by a trial subject is outweighed by the potential benefit to them from taking part in the trial. The focus of the application review is to assess whether risks have been identified and appropriate steps taken to alleviate these as much as possible. Other factors are also taken into account during a review, such as regulatory requirements, and emerging non-clinical and clinical data from other trials on the same or similar products. This paper examines the regulatory review process of a Clinical Trial Authorization application from the perspectives of Quality, Non-Clinical and Clinical Regulatory Assessors at the Medicines and Healthcare products Regulatory Agency. It should be noted that each perspective has highlighted specific issues from their individual competence and that these can be different between the disciplines.

  11. Alien Biochemistries and Their Metabolic By-Products. Lessons from Synthetic Biology

    Science.gov (United States)

    Benner, S.

    2014-03-01

    While the metabolisms of terran organisms are accessible for study and their byproducts are, for the most part, well known, the "diversity" of terran biology arises (as far as we know) from a single common ancestor, represents only a small fraction of possible chemical difersity, and may reflect only a fraction of the possible chemical diversity that might support Darwinian evolution [1]. This talk will consider laboratory experiments on origins [2] and synthetic biology [3], asking how they might inform us about alternative biochemistries, and whether we have any chance of observing remotely their by-products, recognizing the uncertanties in both our models for "weird life" and our models of abiotic processes in incompletely defined planetary environments.

  12. Enzyme and metabolic engineering for the production of novel biopolymers: crossover of biological and chemical processes.

    Science.gov (United States)

    Matsumoto, Ken'ichiro; Taguchi, Seiichi

    2013-12-01

    The development of synthetic biology has transformed microbes into useful factories for producing valuable polymers and/or their precursors from renewable biomass. Recent progress at the interface of chemistry and biology has enabled the production of a variety of new biopolymers with properties that substantially differ from their petroleum-derived counterparts. This review touches on recent trials and achievements in the field of biopolymer synthesis, including chemo-enzymatically synthesized aliphatic polyesters, wholly biosynthesized lactate-based polyesters, polyhydroxyalkanoates and other unusual bacterially synthesized polyesters. The expanding diversities in structure and the material properties of biopolymers are key for exploring practical applications. The enzyme and metabolic engineering approaches toward this goal are discussed by shedding light on the successful case studies.

  13. The reduction of biological production induced by mesoscale mixing: a modelling study in the Benguela upwelling

    CERN Document Server

    Hernández-Carrasco, Ismael; Hernández-García, Emilio; Garçon, Veronique; López, Cristóbal

    2013-01-01

    Recent studies, both based on remote sensed data and coupled models, showed a reduction of biological productivity due to vigorous horizontal mixing in upwelling systems. In order to better understand this phenomenon, we have considered a system of oceanic flow in the Benguela area coupled with a simple biogeochemical model of Nutrient-Phyto-Zooplankton (NPZ) type. For the flow three different surface velocity fields are considered: one derived from satellite altimetry data, and the other two from a regional numerical model at two different spatial resolutions. We computed horizontal particle dispersion in terms of Lyapunov Exponents, and analyzed their correlations with phytoplankton concentrations. Our modelling approach confirms that in the south Benguela, there is a reduction of biological activity when stirring is increased. Two-dimensional offshore advection seems to be the dominant process involved. In the northern area, other factors not taken into account in our simulation are influencing the ecosyst...

  14. Removal of disinfection by-product formation potentials by biologically assisted GAC treatment

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The object of this paper is to evaluate the removal of disinfection by-products formation potential by artificially intensified biological activated carbon(BAC) process which is developed on the basis of traditional ozone granular activated carbon (GAC). The results show that 23.1% of trihalomethane formation potential (THMFP) and 68% of haloacetic acid formation potential (HAAFP) can be removed by BAC,respectively. Under the same conditions, the removal rates of the same substances were 12.2% and 13-25 % respectively only by GAC process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. BAC process has some advantages such as long backwashing cycle time, low backwashing intensity and prolonged activated carbon lifetime, etc.

  15. Nano-Disperse Borides and Carbides: Plasma Technology Production, Specific Properties, Economic Evaluation

    Science.gov (United States)

    Galevskii, G. V.; Rudneva, V. V.; Galevskii, S. G.; Tomas, K. I.; Zubkov, M. S.

    2016-04-01

    The experience of production and study on properties of nano-disperse chromium and titanium borides and carbides, and silicon carbide has been generalized. The structure and special service aspects of utilized plasma-metallurgical complex equipped with a three-jet direct-flow reactor with a capacity of 150 kW have been outlined. Processing, heat engineering and service life characteristics of the reactor are specified. The synthesis parameters of borides and carbides, as well as their basic characteristics in nano-disperse condition and their production flow diagram are outlined. Engineering and economic performance of synthesizing borides in laboratory and industrial conditions is assessed, and the respective segment of the international market as well. The work is performed at State Siberian Industrial University as a project part of the State Order of Ministry of Science and Education of the Russian Federation No. 11.1531/2014/K.

  16. Turbulent chromo-fields and thermal particle production in quark-gluon plasma medium

    CERN Document Server

    Chandra, Vinod

    2016-01-01

    The Weibel type instabilities appear in the expanding quark-gluon plasma (QGP) in relativistic heavy-ion collisions, due to the presence of momentum-space anisotropy, are responsible for the generation of the turbulent color fields. The ensemble averaged (ensemble of the turbulent fields) effective diffusive Vlasov equation, for the modified momentum distribution functions of the quarks and gluons encodes the physics of such instability and leads to the anomalous transport process in the QGP medium. In the present case, the solution of the linearized transport equation for the modified momentum distribution functions has been served as the modeling for the non-equilibrium momentum distribution functions for the QGP degrees of freedom. The strength of anisotropy has been related to a phenomenologically obtained jet-quenching parameter, $\\hat{q}$. We have computed the contribution of these anisotropic terms to the thermal dilepton production rates. The production rate has been seen to be appreciably sensitive t...

  17. A cell-free expression and purification process for rapid production of protein biologics.

    Science.gov (United States)

    Sullivan, Challise J; Pendleton, Erik D; Sasmor, Henri H; Hicks, William L; Farnum, John B; Muto, Machiko; Amendt, Eric M; Schoborg, Jennifer A; Martin, Rey W; Clark, Lauren G; Anderson, Mark J; Choudhury, Alaksh; Fior, Raffaella; Lo, Yu-Hwa; Griffey, Richard H; Chappell, Stephen A; Jewett, Michael C; Mauro, Vincent P; Dresios, John

    2016-02-01

    Cell-free protein synthesis has emerged as a powerful technology for rapid and efficient protein production. Cell-free methods are also amenable to automation and such systems have been extensively used for high-throughput protein production and screening; however, current fluidic systems are not adequate for manufacturing protein biopharmaceuticals. In this work, we report on the initial development of a fluidic process for rapid end-to-end production of recombinant protein biologics. This process incorporates a bioreactor module that can be used with eukaryotic or prokaryotic lysates that are programmed for combined transcription/translation of an engineered DNA template encoding for specific protein targets. Purification of the cell-free expressed product occurs through a series of protein separation modules that are configurable for process-specific isolation of different proteins. Using this approach, we demonstrate production of two bioactive human protein therapeutics, erythropoietin and granulocyte-macrophage colony-stimulating factor, in yeast and bacterial extracts, respectively, each within 24 hours. This process is flexible, scalable and amenable to automation for rapid production at the point-of-need of proteins with significant pharmaceutical, medical, or biotechnological value.

  18. Biologically active amines in fermented and non-fermented commercial soybean products from the Spanish market.

    Science.gov (United States)

    Toro-Funes, N; Bosch-Fuste, J; Latorre-Moratalla, M L; Veciana-Nogués, M T; Vidal-Carou, M C

    2015-04-15

    Biologically active amines were determined in commercial soybean products. The antioxidant polyamines were found in both non-fermented and fermented soybean products. Natto and tempeh showed the highest content of polyamines (75-124 and 11-24 mg/kg of spermidine and spermine, respectively). On the other hand, the bacterial-related biogenic amines, tyramine, histamine, tryptamine and β-phenylethylamine, were detected in practically all fermented products with a high variability. The highest contents were found in sufu, tamari and soybean paste. Extremely high tyramine and histamine contents, 1700 and 700 mg/kg, respectively, found in some sufu samples could be unhealthy. However, biogenic amines observed in the other soybean products should not be a risk for healthy consumers. However, individuals who take monoamine and diamine oxidase inhibitors drugs should be strongly recommended to avoid this kind of products in order to suffer no adverse health effects. These biogenic amines were not detected in non-fermented soybean products.

  19. Long-term biological hydrogen production by agar immobilized Rhodobacter capsulatus in a sequential batch photobioreactor.

    Science.gov (United States)

    Elkahlout, Kamal; Alipour, Siamak; Eroglu, Inci; Gunduz, Ufuk; Yucel, Meral

    2017-04-01

    In this study, agar immobilization technique was employed for biological hydrogen production using Rhodobacter capsulatus DSM 1710 (wild type) and YO3 (hup-mutant) strains in sequential batch process. Different agar and glutamate concentrations were tested with defined nutrient medium. Agar concentration 4% (w/v) and 4 mM glutamate were selected for bacterial immobilization in terms of rate and longevity of hydrogen production. Acetate concentration was increased from 40 to 60-100 and 60 mM gave best results with both bacterial strains immobilized in 4% (w/v) agar. Cell concentration was increased from 2.5 to 5 mg dcw mL(-1) agar and it was found that increasing cell concentration of wild-type strain caused decrease in yield and productivity while these parameters improved by increasing cell concentration of mutant strain. Also, the hydrogen production time has extended from 17 days up to 60 days according to the process conditions and parameters. Hydrogen production by immobilized photosynthetic bacteria is a convenient technology for hydrogen production as it enables to produce hydrogen with high organic acid concentrations comparing to suspended cultures. Besides, immobilization increases the stability of the system and allowed sequential batch operation for long-term application.

  20. Bioenergy and products from thermal pyrolysis of rice straw using plasma torch.

    Science.gov (United States)

    Shie, Je-Lueng; Tsou, Feng-Ju; Lin, Kae-Long; Chang, Ching-Yuan

    2010-01-01

    The aim of this work was to study the feasibility and operation performance of plasma torch pyrolysis of biomass wastes, taking rice straw as the target material. This novel method has several advantages including high heating rate, short heating time, no viscous tar and low residual char (7.45-13.78 wt.%) or lava. The productions of CO and H(2) are the major components (91.85-94.14 vol.%) in the gas products with relatively high reaction rates. The maximum concentrations of gaseous products occurring times are all below 1 min. Almost 90% of gaseous products were appeared in 4 min reaction time. The yield of H(2) increases with the increase of input power or temperature. With the increase of moisture (5-55 wt.%), the mass yields of H(2) and CO(2) also increase from the H(2)O decomposition. However, due to the CO(2) production, the accumulated volume fraction of syngas decreases with the increase of moisture.

  1. Production of hydroxyapatite layers on the plasma electrolytically oxidized surface of titanium alloys.

    Science.gov (United States)

    Lugovskoy, Alex; Lugovskoy, Svetlana

    2014-10-01

    Hydroxyapatite (HA) is a bioactive material that is widely used for improving the osseointegration of titanium dental implants. Titanium can be coated with HA by various methods, such as chemical vapor deposition (CVD), thermal spray, or plasma spray. HA coatings can also be grown on titanium surfaces by hydrothermal, chemical, and electrochemical methods. Plasma electrolytic oxidation (PEO), or microarc oxidation (MAO), is an electrochemical method that enables the production of a thick porous oxide layer on the surface of a titanium implant. If the electrolyte in which PEO is performed contains calcium and phosphate ions, the oxide layer produced may contain hydroxyapatite. The HA content can then be increased by subsequent hydrothermal treatment. The HA thus produced on titanium surfaces has attractive properties, such as a high porosity, a controllable thickness, and a considerable density, which favor its use in dental and bone surgery. This review summarizes the state of the art and possible further development of PEO for the production of HA on Ti implants.

  2. Non-equilibrium quantum plasmas in scalar QED photon production, magnetic and Debye masses and conductivity

    CERN Document Server

    Boyanovsky, D; Simionato, M

    2000-01-01

    We study the generation of a non-equilibrium plasma in scalar QED with N charged scalar fields through spinodal instabilities in the case of a super cooled second order phase transition and parametric amplification when the order parameter oscillates with large amplitude around the minimum of the potential.The focus is to study the non-equilibrium electromagnetic properties of the plasma, such as photon production, electric and magnetic screening and conductivity. A novel kinetic equation is introduced to compute photon production far away from equilibrium in the large N limit and lowest order in the electromagnetic coupling.During the early stages of the dynamics the photon density grows exponentially and asymptotically the amplitude and frequency distribution becomes \\sim alpha m^2/[lambda^2 ømega^3] with lambda the scalar self-coupling and m the scalar mass.In the case of a phase transition,electric and magnetic fields are correlated on distances xi(t) \\sim sqrt{t} during the early stages and the power sp...

  3. Products and bioenergy from the pyrolysis of rice straw via radio frequency plasma and its kinetics.

    Science.gov (United States)

    Tu, Wen-Kai; Shie, Je-Lung; Chang, Ching-Yuan; Chang, Chiung-Fen; Lin, Cheng-Fang; Yang, Sen-Yeu; Kuo, Jing T; Shaw, Dai-Gee; You, Yii-Der; Lee, Duu-Jong

    2009-03-01

    The radio frequency plasma pyrolysis technology, which can overcome the disadvantages of common pyrolysis methods such as less gas products while significant tar formation, was used for pyrolyzing the biomass waste of rice straw. The experiments were performed at various plateau temperatures of 740, 813, 843 and 880K with corresponding loading powers of 357, 482, 574 and 664W, respectively. The corresponding yields of gas products (excluding nitrogen) from rice straw are 30.7, 56.6, 62.5 and 66.5wt.% with respect to the original dried sample and the corresponding specific heating values gained from gas products are about 4548, 4284, 4469 and 4438kcalkg(-1), respectively, for the said cases. The corresponding combustible portions remained in the solid residues are about 64.7, 35, 28.2 and 23.5wt.% with specific heating values of 4106, 4438, 4328 and 4251kcalkg(-1) with respective to solid residues, while that in the original dried sample is 87.2wt.% with specific heating value of 4042kcalkg(-1). The results indicated that the amount of combustibles converted into gas products increases with increasing plateau temperature. The kinetic model employed to describe the pyrolytic conversion of rice straw at constant temperatures agrees well with the experimental data. The best curve fittings render the frequency factor of 5759.5s(-1), activation energy of 74.29kJ mol(-1) and reaction order of 0.5. Data and information obtained are useful for the future design and operation of pyrolysis of rice straw via radio frequency plasma.

  4. The scientific production in health and biological sciences of the top 20 Brazilian universities

    Directory of Open Access Journals (Sweden)

    R. Zorzetto

    2006-12-01

    Full Text Available Brazilian scientific output exhibited a 4-fold increase in the last two decades because of the stability of the investment in research and development activities and of changes in the policies of the main funding agencies. Most of this production is concentrated in public universities and research institutes located in the richest part of the country. Among all areas of knowledge, the most productive are Health and Biological Sciences. During the 1998-2002 period these areas presented heterogeneous growth ranging from 4.5% (Pharmacology to 191% (Psychiatry, with a median growth rate of 47.2%. In order to identify and rank the 20 most prolific institutions in these areas, searches were made in three databases (DataCAPES, ISI and MEDLINE which permitted the identification of 109,507 original articles produced by the 592 Graduate Programs in Health and Biological Sciences offered by 118 public universities and research institutes. The 20 most productive centers, ranked according to the total number of ISI-indexed articles published during the 1998-2003 period, produced 78.7% of the papers in these areas and are strongly concentrated in the Southern part of the country, mainly in São Paulo State.

  5. Degeneration of penicillin production in ethanol-limited chemostat cultivations of Penicillium chrysogenum: A systems biology approach

    NARCIS (Netherlands)

    Douma, R.D.; Batista, J.M.; Touw, K.M.; Kiel, J.A.K.W.; Krikken, A.M.; Zhao, Z.; Veiga, T.; Klaassen, P.; Bovenberg, R.A.L.; Daran, J.M.; Heijnen, J.J.; Van Gulik, W.M.

    2011-01-01

    Background In microbial production of non-catabolic products such as antibiotics a loss of production capacity upon long-term cultivation (for example chemostat), a phenomenon called strain degeneration, is often observed. In this study a systems biology approach, monitoring changes from gene to pro

  6. Degeneration of penicillin production in ethanol-limited chemostat cultivations of Penicillium chrysogenum: A systems biology approach

    NARCIS (Netherlands)

    Douma, R.D.; Batista, J.M.; Touw, K.M.; Kiel, J.A.K.W.; Krikken, A.M.; Zhao, Z.; Veiga, T.; Klaassen, P.; Bovenberg, R.A.L.; Daran, J.M.; Heijnen, J.J.; Van Gulik, W.M.

    2011-01-01

    Background In microbial production of non-catabolic products such as antibiotics a loss of production capacity upon long-term cultivation (for example chemostat), a phenomenon called strain degeneration, is often observed. In this study a systems biology approach, monitoring changes from gene to

  7. Gaseous hydrocarbon production by the reaction of coal char with hydrogen plasma at relatively lower microwave power

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, S.; Nishikubo, K.; Imamura, T. [Kyushu National Industrial Research Institute, Tosu (Japan)

    1998-07-01

    Experimental conditions such as reaction temperature, microwave power and reaction pressure were changed in the reaction of carbon with hydrogen plasma. Methane was major product and other hydrocarbons such as acetylene and C2-C4 hydrocarbons were also produced. Methane production shows its maximum at 700-900 K and at 30W of microwave power. 2 figs.

  8. Optimization of hydrogen production by Halobacterium salinarium coupled with E coli using milk plasma as fermentative substrate

    Directory of Open Access Journals (Sweden)

    Brijesh Prasad

    2011-08-01

    Full Text Available Batch experiments were conducted to investigate the fermentative hydrogen production by coupled system of Halobacterium salinarium and E. coli. Increase in the light intensity from 6000 lux to 12000 lux and changing the inoculums level of E coli resulted in 10 fold increase in the rate of hydrogen production using the coupled system. Statistical based design of experiments was applied to optimize the rate of hydrogen production using milk plasma,popularly known as cheese whey, a dairy industry byproduct. An optimal rate of hydrogen production of 56.7 ml/l h was achieved with 14.42 % (by volume of milk plasma and an initial pH of 6.6. The investigations provided information on achieving higher yields with milk plasma as substrate, its optimal concentration, and importance of media pH for producing higher rate of hydrogen.

  9. Studies of the Production of Fungal Polyketides in Aspergillus nidulans by Using Systems Biology Tools

    DEFF Research Database (Denmark)

    Panagiotou, Gianni; Andersen, Mikael Rørdam; Grotkjær, Thomas

    2009-01-01

    -methylsalicylic acid (6-MSA) synthase gene and one expressing the 6-MSA synthase gene and overexpressing the native xylulose-5-phosphate phosphoketolase gene (xpkA) for increasing the pool of polyketide precursor levels. The physiology of the recombinant strains and that of a reference wild-type strain were...... that overexpression of xpkA does not directly improve 6-MSA production on glucose, but it is possible, if the metabolic flux through the lower part of glycolysis is reduced, to obtain quite high yields for conversion of sugar to 6-MSA. Systems biology tools were employed for in-depth analysis of the metabolic...

  10. Gamma-hydroxybutyric acid endogenous production and post-mortem behaviour - the importance of different biological matrices, cut-off reference values, sample collection and storage conditions.

    Science.gov (United States)

    Castro, André L; Dias, Mário; Reis, Flávio; Teixeira, Helena M

    2014-10-01

    Gamma-Hydroxybutyric Acid (GHB) is an endogenous compound with a story of clinical use, since the 1960's. However, due to its secondary effects, it has become a controlled substance, entering the illicit market for recreational and "dance club scene" use, muscle enhancement purposes and drug-facilitated sexual assaults. Its endogenous context can bring some difficulties when interpreting, in a forensic context, the analytical values achieved in biological samples. This manuscript reviewed several crucial aspects related to GHB forensic toxicology evaluation, such as its post-mortem behaviour in biological samples; endogenous production values, whether in in vivo and in post-mortem samples; sampling and storage conditions (including stability tests); and cut-off reference values evaluation for different biological samples, such as whole blood, plasma, serum, urine, saliva, bile, vitreous humour and hair. This revision highlights the need of specific sampling care, storage conditions, and cut-off reference values interpretation in different biological samples, essential for proper practical application in forensic toxicology. Copyright © 2014 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

  11. Linking neuroethology to the chemical biology of natural products: interactions between cone snails and their fish prey, a case study.

    Science.gov (United States)

    Olivera, Baldomero M; Raghuraman, Shrinivasan; Schmidt, Eric W; Safavi-Hemami, Helena

    2017-05-27

    From a biological perspective, a natural product can be defined as a compound evolved by an organism for chemical interactions with another organism including prey, predator, competitor, pathogen, symbiont or host. Natural products hold tremendous potential as drug leads and have been extensively studied by chemists and biochemists in the pharmaceutical industry. However, the biological purpose for which a natural product evolved is rarely addressed. By focusing on a well-studied group of natural products-venom components from predatory marine cone snails-this review provides a rationale for why a better understanding of the evolution, biology and biochemistry of natural products will facilitate both neuroscience and the potential for drug leads. The larger goal is to establish a new sub-discipline in the broader field of neuroethology that we refer to as "Chemical Neuroethology", linking the substantial work carried out by chemists on natural products with accelerating advances in neuroethology.

  12. [The pharmaceutical company Choay: an history linked to research and commercialization of biological products].

    Science.gov (United States)

    Bonnemain, Bruno

    2015-12-01

    Eugène Choay, when he created his own company in 1911, had already a large experience in pharmaceutical industry obtained with Maison Frère where he discovered the famous Dentol, well known thank to Poulbot's publicity drawings for this product. But, convinced of the future of biological products and Opotherapy, he decided to invest himself in this area with a totally new process for cold desiccation of organs. The success will be there and several pharmacists from Choay family will take care of the company and bring it to the top of its specialty in Opotherapy. At the beginning of the 1970's, Choay in in full development and has the products, the sites and the human resources for the future. In 1975, 4 therapeutic areas are covered by Choay's products: coagulation, inflammation, dermatology and hepatology. After more than 65 years of independence, Choay group will be finally bought partially and then totally by Sanofi. With the support of Sanofi, Choay created, in 1981, their US subsidiary called Choay Laboratories Inc;, after the NDA approval of sub-cutaneous Calciparine by the FDA. In 1985 Fraxiparine, a low molecular weight heparin discovered by Jean Choay's team, is lauched on the market. All these developments represent an outstanding record a longevity which indicates how perceptive was Eugène Choay and his successors when choosing to invest totally in the therapeutic use of hormones and products acting on coagulation factors.

  13. Suppressing and enhancing effects of mesoscale dynamics on biological production in the Mozambique Channel

    Science.gov (United States)

    José, Y. S.; Penven, P.; Aumont, O.; Machu, E.; Moloney, C. L.; Shillington, F.; Maury, O.

    2016-06-01

    We used a coupled physical-biogeochemical model to investigate how the strong eddy activity typical of the Mozambique Channel affects biological production. A numerical experiment was carried out, in which mesoscale dynamics were suppressed by cancelling the nonlinear terms for horizontal momentum in the Naviers-Stokes equation. Mesoscale dynamics were found to be responsible for (1) increased offshore production in the Mozambique Channel as a result of net eddy-induced offshore transport of nutrient-rich coastal waters; (2) decreased shelf production along the central Mozambican and south-west Madagascar coast caused by a reduction in nutrient availability related to the net eddy-induced lateral transport of nutrients; (3) increased coastal production along the northern Mozambican coast caused by eddy-induced nutrient supply. The model results also showed an intensification and shallowing of the subsurface production, related to increased upper layer nutrient concentrations caused by eddy activity. In addition, by driving the detachment of the East Madagascar Current at the southern tip of the island, inertial processes intensify the southern Madagascar upwelling and causes offshore diffusion of the upwelled waters. These results emphasize the complex role played by eddy activity and, more generally, inertial processes on marine ecosystems in this region.

  14. Long-term organic farming fosters below and aboveground biota: Implications for soil quality, biological control and productivity

    NARCIS (Netherlands)

    Birkhofer, K.; Bezemer, T.M.; Bloem, J.; Bonkowski, M.; Christensen, S.; Dubois, D.; Ekelund, F.; Fliessbach, A.; Gunst, L.; Hedlund, K.; Mäder, P.; Mikola, J.; Robin, C.; Setälä, H.; Tatin-Froux, F.; Putten, van der W.H.; Scheu, S.

    2008-01-01

    Organic farming may contribute substantially to future agricultural production worldwide by improving soil quality and pest control, thereby reducing environmental impacts of conventional farming. We investigated in a comprehensive way soil chemical, as well as below and aboveground biological param

  15. The association of plasma fluorescent oxidation products and chronic kidney disease: a case-control study.

    Science.gov (United States)

    Rebholz, Casey M; Wu, Tianying; Hamm, L Lee; Arora, Robin; Khan, Islam E; Liu, Yanxi; Chen, Chung-Shiuan; Mills, Katherine T; Rogers, Stephanie; Kleinpeter, Myra A; Simon, Eric E; Chen, Jing

    2012-01-01

    Plasma fluorescent oxidation products (FLOP) constitute a stable and easily measured biomarker of cumulative oxidative stress. However, their association with chronic kidney disease (CKD) has not been studied. We examined the association of FLOP and CKD in 201 CKD patients and 201 controls without CKD from the community. CKD was defined as an estimated glomerular filtration rate (eGFR) products): 215.2 (181.3-268.7) vs. 156.6 (139.6-177.3) fluorescent intensity units/ml, p products): 534.8 (379.3-842.4) vs. 269.9 (232.4-410.5) fluorescent intensity units/ml, p products): 51.4 (44.4-66.0) vs. 45.2 (38.3-51.7) fluorescent intensity units/ml, p = 0.002]. Compared with those with a FLOP level below the 75th percentile, participants with a FLOP level above the 75th percentile had increased odds of CKD after adjustment for covariables (FLOP1: odds ratio 13.1, 95% confidence interval 6.2-27.6; FLOP2: odds ratio 5.7, 95% confidence interval 2.9-11.1; FLOP3: odds ratio 2.4, 95% confidence interval 1.2-4.7). Levels of FLOP1, FLOP2 and FLOP3 were related to eGFR (p studies are warranted to elucidate its role in the development and progression of CKD. Copyright © 2012 S. Karger AG, Basel.

  16. Biological characteristics of marine bacterium S - 9801 strain and its culture conditions of pigment production

    Institute of Scientific and Technical Information of China (English)

    田黎; 何培青; 武洪庆; 温占波; 刘晨临; 李光友

    2002-01-01

    Strain of Flavobacterium sp. (S- 9801), was screened from 207 strains of marine bacteria isolated from the Bohai Sea continental shelf and the Zhujiang Estuary, for its red pigment production. The biological characteristics of strain S- 9801 and culture conditions of pigment production have been checked out in this study. The color of the bacterial colony on 2216E medium was from coccineus to rose bengal. Optimum culture conditions were sodium chloride concentration(g/dm3), 10~30; pH,3~8; temperature, 25~28℃; tryptone and yeast extract as nitrogen sources and gluccse as carbon source. Under optimum conditions, pigment accumulation started after 12 h, reaching a maximum rate of synthesis at 36 h.

  17. Production of biologically active recombinant avidin in baculovirus-infected insect cells.

    Science.gov (United States)

    Airenne, K J; Oker-Blom, C; Marjomäki, V S; Bayer, E A; Wilchek, M; Kulomaa, M S

    1997-02-01

    An efficient lepidopteran insect cell system was established for the expression of a recombinant form of chicken egg-white avidin. The gene product was obtained in both secreted and intracellular forms, and biologically active recombinant avidin was isolated using affinity chromatography on an iminobiotin-agarose column. Similar to the known quaternary structure of the native egg-white protein, the purified recombinant protein was glycosylated and assembled mainly into tetramers. Like native avidin, the recombinant tetramer also exhibited a high level of thermostability, and was further stabilized upon binding biotin. The biotin-binding and structural properties of the recombinant avidin are thus similar to those of the natural egg-white protein, and the insect system is appropriate both for future site-directed mutagenesis studies and for the production of avidin fusion proteins.

  18. The discharge mode transition and O(5p1) production mechanism of pulsed radio frequency capacitively coupled plasma

    Science.gov (United States)

    Liu, X. Y.; Hu, J. T.; Liu, J. H.; Xiong, Z. L.; Liu, D. W.; Lu, X. P.; Shi, J. J.

    2012-07-01

    The discharge mode transition from uniform plasma across the gas gap to the α mode happens at the rising phase of the pulsed radio frequency capacitively coupled plasma (PRF CCP). This transition is attributed to the fast increasing stochastic heating at the edge of sheath. In the second stage with the stable current and voltage amplitude, the consistency between experimental and numerical spatial-temporal 777 nm emission profile suggests that He* and He2* dominate the production of O(5p1) through dissociation and excitation of O2. Finally, the sterilization efficiency of PRF CCP is found to be higher than that of plasma jet.

  19. The power-supply control system in the device of acetylene production by H-plasma pyrolysis coal

    Energy Technology Data Exchange (ETDEWEB)

    Chen, F.Y.; Zhang, M.; Fu, P.; Weng, P.D. [Chinese Academy of Sciences, Hefei (China)

    2006-09-15

    The device of acetylene production by hydrogen (H{sub 2}) plasma pyrolysis coal is examined and developed not only for studying the application of low temperature plasma but also for studying the clean use of coal. The power-supply control system is used to ensure supplying a steady energy to generate and maintain the plasma electric arc of the device. The hardware configuration and the software design of the system are described in this paper. Verified by experiments, this system can meet the requirements of real-time performance, reliability and extensibility for the device.

  20. The Power-Supply Control System in the Device of Acetylene Production by H-Plasma Pyrolysis Coal

    Science.gov (United States)

    Chen, Feiyun; Zhang, Ming; Fu, Peng; Weng, Peide

    2006-09-01

    The device of acetylene production by hydrogen (H-) plasma pyrolysis coal is examined and developed not only for studying the application of low temperature plasma but also for studying the clean use of coal. The power-supply control system is used to ensure supplying a steady energy to generate and maintain the plasma electric arc of the device. The hardware configuration and the software design of the system are described in this paper. Verified by experiments, this system can meet the requirements of real-time performance, reliability and extensibility for the device.

  1. Production of stable, non-thermal atmospheric pressure rf capacitive plasmas using gases other than helium or neon

    Science.gov (United States)

    Park, Jaeyoung; Henins, Ivars

    2005-06-21

    The present invention enables the production of stable, steady state, non-thermal atmospheric pressure rf capacitive .alpha.-mode plasmas using gases other than helium and neon. In particular, the current invention generates and maintains stable, steady-state, non-thermal atmospheric pressure rf .alpha.-mode plasmas using pure argon or argon with reactive gas mixtures, pure oxygen or air. By replacing rare and expensive helium with more readily available gases, this invention makes it more economical to use atmospheric pressure rf .alpha.-mode plasmas for various materials processing applications.

  2. Connecting marine productivity to sea-spray via nanoscale biological processes: Phytoplankton Dance or Death Disco?

    Science.gov (United States)

    O'Dowd, Colin; Ceburnis, Darius; Ovadnevaite, Jurgita; Bialek, Jakub; Stengel, Dagmar B.; Zacharias, Merry; Nitschke, Udo; Connan, Solene; Rinaldi, Matteo; Fuzzi, Sandro; Decesari, Stefano; Cristina Facchini, Maria; Marullo, Salvatore; Santoleri, Rosalia; Dell'Anno, Antonio; Corinaldesi, Cinzia; Tangherlini, Michael; Danovaro, Roberto

    2015-10-01

    Bursting bubbles at the ocean-surface produce airborne salt-water spray-droplets, in turn, forming climate-cooling marine haze and cloud layers. The reflectance and ultimate cooling effect of these layers is determined by the spray’s water-uptake properties that are modified through entrainment of ocean-surface organic matter (OM) into the airborne droplets. We present new results illustrating a clear dependence of OM mass-fraction enrichment in sea spray (OMss) on both phytoplankton-biomass, determined from Chlorophyll-a (Chl-a) and Net Primary Productivity (NPP). The correlation coefficient for OMss as a function of Chl-a increased form 0.67 on a daily timescale to 0.85 on a monthly timescale. An even stronger correlation was found as a function of NPP, increasing to 0.93 on a monthly timescale. We suggest the observed dependence is through the demise of the bloom, driven by nanoscale biological processes (such as viral infections), releasing large quantities of transferable OM comprising cell debris, exudates and other colloidal materials. This OM, through aggregation processes, leads to enrichment in sea-spray, thus demonstrating an important coupling between biologically-driven plankton bloom termination, marine productivity and sea-spray modification with potentially significant climate impacts.

  3. Genome Engineering and Modification Toward Synthetic Biology for the Production of Antibiotics.

    Science.gov (United States)

    Zou, Xuan; Wang, Lianrong; Li, Zhiqiang; Luo, Jie; Wang, Yunfu; Deng, Zixin; Du, Shiming; Chen, Shi

    2017-03-15

    Antibiotic production is often governed by large gene clusters composed of genes related to antibiotic scaffold synthesis, tailoring, regulation, and resistance. With the expansion of genome sequencing, a considerable number of antibiotic gene clusters has been isolated and characterized. The emerging genome engineering techniques make it possible towards more efficient engineering of antibiotics. In addition to genomic editing, multiple synthetic biology approaches have been developed for the exploration and improvement of antibiotic natural products. Here, we review the progress in the development of these genome editing techniques used to engineer new antibiotics, focusing on three aspects of genome engineering: direct cloning of large genomic fragments, genome engineering of gene clusters, and regulation of gene cluster expression. This review will not only summarize the current uses of genomic engineering techniques for cloning and assembly of antibiotic gene clusters or for altering antibiotic synthetic pathways but will also provide perspectives on the future directions of rebuilding biological systems for the design of novel antibiotics. © 2017 Wiley Periodicals, Inc.

  4. Assessment Of Surface-Catalyzed Reaction Products From High Temperature Materials In Plasmas

    Science.gov (United States)

    Allen, Luke Daniel

    Current simulations of atmospheric entry into both Mars and Earth atmospheres for the design of thermal protections systems (TPS) typically invoke conservative assumptions regarding surface-catalyzed recombination and the amount of energy deposited on the surface. The need to invoke such assumptions derives in part from lack of adequate experimental data on gas-surface interactions at trajectory relevant conditions. Addressing this issue, the University of Vermont's Plasma Test and Diagnostics Laboratory has done extensive work to measure atomic specie consumption by measuring the concentration gradient over various material surfaces. This thesis extends this work by attempting to directly diagnose molecular species production in air plasmas. A series of spectral models for the A-X and B-X systems of nitric oxide (NO), and the B-X system of boron monoxide (BO) have been developed. These models aim to predict line positions and strengths for the respective molecules in a way that is best suited for the diagnostic needs of the UVM facility. From the NO models, laser induced fluorescence strategies have been adapted with the intent of characterizing the relative quantity and thermodynamic state of NO produced bysurface-catalyzed recombination, while the BO model adds a diagnostic tool for the testing of diboride-based TPS materials. Boundary layer surveys of atomic nitrogen and NO have been carried out over water-cooled copper and nickel surfaces in air/argon plasmas. Translation temperatures and relative number densities throughout the boundary layer are reported. Additional tests were also conducted over a water-cooled copper surface to detect evidence of highly non-equilibrium effects in the form of excess population in elevated vibrational levels of the A-X system of NO. The tests showed that near the sample surface there is a much greater population in the upsilon'' = 1ground state than is predicted by a Boltzmann distribution.

  5. Production, fate and pathogenicity of plasma microparticles in murine cerebral malaria.

    Directory of Open Access Journals (Sweden)

    Fatima El-Assaad

    2014-03-01

    Full Text Available In patients with cerebral malaria (CM, higher levels of cell-specific microparticles (MP correlate with the presence of neurological symptoms. MP are submicron plasma membrane-derived vesicles that express antigens of their cell of origin and phosphatidylserine (PS on their surface, facilitating their role in coagulation, inflammation and cell adhesion. In this study, the in vivo production, fate and pathogenicity of cell-specific MP during Plasmodium berghei infection of mice were evaluated. Using annexin V, a PS ligand, and flow cytometry, analysis of platelet-free plasma from infected mice with cerebral involvement showed a peak of MP levels at the time of the neurological onset. Phenotypic analyses showed that MP from infected mice were predominantly of platelet, endothelial and erythrocytic origins. To determine the in vivo fate of MP, we adoptively transferred fluorescently labelled MP from mice with CM into healthy or infected recipient mice. MP were quickly cleared following intravenous injection, but microscopic examination revealed arrested MP lining the endothelium of brain vessels of infected, but not healthy, recipient mice. To determine the pathogenicity of MP, we transferred MP from activated endothelial cells into healthy recipient mice and this induced CM-like brain and lung pathology. This study supports a pathogenic role for MP in the aggravation of the neurological lesion and suggests a causal relationship between MP and the development of CM.

  6. Dilepton production by dynamical quasiparticles in the strongly interacting quark gluon plasma

    CERN Document Server

    Linnyk, O

    2010-01-01

    The dilepton production by the constituents of the strongly interacting quark-gluon-plasma (sQGP) is addressed. In order to make quantitative predictions at realistically low plasma temperatures (O(T_c)), experimentally relevant low dilepton mass (O(1 GeV)) and strong coupling (alphaS=0.5-1), we take into account not only the higher order pQCD reaction mechanisms, but also the non-perturbative spectral functions (off-shellness) and self-energies of the quarks, anti-quarks and gluons thus going beyond the leading twist. For this purpose, our calculations utilize parametrizations of the non-perturbative propagators for quarks and gluons provided by the dynamical quasi-particle model (DQPM) matched to reproduce lattice data. The DQPM describes QCD properties in terms of single-particle Green's functions (in the sense of a two-particle irreducible approach) and leads to the notion of the constituents of the sQGP being effective quasiparticles, which are massive and have broad spectral functions (due to large inte...

  7. Intense positron beam as a source for production of electron-positron plasma

    Science.gov (United States)

    Stoneking, M. R.; Horn-Stanja, J.; Stenson, E. V.; Pedersen, T. Sunn; Saitoh, H.; Hergenhahn, U.; Niemann, H.; Paschkowski, N.; Hugenschmidt, C.; Piochacz, C.

    2016-10-01

    We aim to produce magnetically confined, short Debye length electron-positron plasma and test predicted properties for such systems. A first challenge is obtaining large numbers of positrons; a table-top experiment (system size 5 cm) with a temperature less than 5 eV requires about 1010 positrons to have more than 10 Debye lengths in the system. The NEPOMUC facility at the FRM II research reactor in Germany is one of the world's most intense positron sources. We report on characterization (using a retarding field energy analyzer with magnetic field gradient) of the NEPOMUC beam as delivered to the open beam port at various beam energies and in both the re-moderated and primary beam configurations in order to design optimal trapping (and accumulation) schemes for production of electron-positron plasma. The intensity of the re-moderated (primary) beam is in the range 2 -3 x 107 /s (1 - 5 x 108 /s). The re-moderated beam is currently the most promising for direct injection and confinement experiments; it has a parallel energy spread of 15 - 35% and the transverse energy spread is 6 - 15% of the parallel energy. We report on the implications for injection and trapping in a dipole magnetic field as well as plans for beam development, in situ re-moderation, and accumulation. We also report results demonstrating a difference in phosphor luminescent response to low energy positrons versus electrons.

  8. Biological effects of activation products and other chemicals released from fusion power plants

    Energy Technology Data Exchange (ETDEWEB)

    Strand, J.A.; Poston, T.M.

    1976-09-01

    Literature reviews indicate that existing information is incomplete, often contradictory, and of questionable value for the prediction and assessment of ultimate impact from fusion-associated activation products and other chemical releases. It is still uncertain which structural materials will be used in the blanket and first wall of fusion power plants. However, niobium, vanadium, vanadium-chromium alloy, vanadium-titanium alloy, sintered aluminum product, and stainless steel have been suggested. The activation products of principal concern will be the longer-lived isotopes of /sup 26/Al, /sup 49/V, /sup 51/Cr, /sup 54/Mn, /sup 55/Fe, /sup 58/Co, /sup 60/Co, /sup 93/Nb, and /sup 94/Nb. Lithium released to the environment either during the mining cycle, from power plant operation or accident, may be in the form of a number of compound types varying in solubility and affinity for biological organisms. The effects of a severe liquid metal fire or explosion involving Na or K will vary according to inherent abiotic and biotic features of the affected site. Saline, saline-alkaline, and sodic soils of arid lands would be particularly susceptible to alkaline stress. Beryllium released to the environment during the mining cycle or reactor accident situation could be in the form of a number of compound types. Adverse effects to aquatic species from routine chemical releases (biocides, corrosion inhibitors, dissolution products) may occur in the discharge of both fission and fusion power plant designs.

  9. The secondary metabolite bioinformatics portal: Computational tools to facilitate synthetic biology of secondary metabolite production

    Directory of Open Access Journals (Sweden)

    Tilmann Weber

    2016-06-01

    Full Text Available Natural products are among the most important sources of lead molecules for drug discovery. With the development of affordable whole-genome sequencing technologies and other ‘omics tools, the field of natural products research is currently undergoing a shift in paradigms. While, for decades, mainly analytical and chemical methods gave access to this group of compounds, nowadays genomics-based methods offer complementary approaches to find, identify and characterize such molecules. This paradigm shift also resulted in a high demand for computational tools to assist researchers in their daily work. In this context, this review gives a summary of tools and databases that currently are available to mine, identify and characterize natural product biosynthesis pathways and their producers based on ‘omics data. A web portal called Secondary Metabolite Bioinformatics Portal (SMBP at http://www.secondarymetabolites.org is introduced to provide a one-stop catalog and links to these bioinformatics resources. In addition, an outlook is presented how the existing tools and those to be developed will influence synthetic biology approaches in the natural products field.

  10. Biomarkers in natural fish populations indicate adverse biological effects of offshore oil production.

    Directory of Open Access Journals (Sweden)

    Lennart Balk

    Full Text Available BACKGROUND: Despite the growing awareness of the necessity of a sustainable development, the global economy continues to depend largely on the consumption of non-renewable energy resources. One such energy resource is fossil oil extracted from the seabed at offshore oil platforms. This type of oil production causes continuous environmental pollution from drilling waste, discharge of large amounts of produced water, and accidental spills. METHODS AND PRINCIPAL FINDINGS: Samples from natural populations of haddock (Melanogrammus aeglefinus and Atlantic cod (Gadus morhua in two North Sea areas with extensive oil production were investigated. Exposure to and uptake of polycyclic aromatic hydrocarbons (PAHs were demonstrated, and biomarker analyses revealed adverse biological effects, including induction of biotransformation enzymes, oxidative stress, altered fatty acid composition, and genotoxicity. Genotoxicity was reflected by a hepatic DNA adduct pattern typical for exposure to a mixture of PAHs. Control material was collected from a North Sea area without oil production and from remote Icelandic waters. The difference between the two control areas indicates significant background pollution in the North Sea. CONCLUSION: It is most remarkable to obtain biomarker responses in natural fish populations in the open sea that are similar to the biomarker responses in fish from highly polluted areas close to a point source. Risk assessment of various threats to the marine fish populations in the North Sea, such as overfishing, global warming, and eutrophication, should also take into account the ecologically relevant impact of offshore oil production.

  11. Biological water contamination in some cattle production fields of Argentina subjected to runoff and erosion

    Directory of Open Access Journals (Sweden)

    Celio I. Chagas

    2014-10-01

    Full Text Available Grain production has displaced livestock to marginal lands in most of the productive regions in Argentina since 1990. In the fertile Rolling Pampa region, extensive cattle production has been concentrated in lowlands subjected to flooding, salt excess, erosion and sedimentation processes but also in some feedlots recently located in sloping arable lands prone to soil erosion. We studied the concentration of microbiological contamination indicators in runoff water and sediments accumulated in depressions along the tributary network from these lands devoted to cattle production. The aims of this work were: (i to gather a reliable set of data from different monitoring periods and scales, (ii to search for simple and sensible variables to be used as indicators for surface water quality advising purposes and (iii to corroborate previous biological contamination conceptual models for this region. Concentration of pollution indicators in these ponds was related to mean stocking rates from nearby fields and proved to depend significantly on the accumulated water and sediments. Viable mesophiles and total coliforms were found mainly attached to large sediments rather than in the runoff water phase. Seasonal sampling showed that the time period between the last significant runoff event and each sampling date regarding enterococci proved to be a sensible variable for predicting contamination. Enterococci concentration tended to increase gradually until the next extraordinary runoff event washed away contaminants. The mentioned relationship may be useful for designing early warning surface water contamination programs regarding enterococci dynamics and other related microbial pollutants as well.

  12. The great 2012 Arctic Ocean summer cyclone enhanced biological productivity on the shelves.

    Science.gov (United States)

    Zhang, Jinlun; Ashjian, Carin; Campbell, Robert; Hill, Victoria; Spitz, Yvette H; Steele, Michael

    2014-01-01

    [1] A coupled biophysical model is used to examine the impact of the great Arctic cyclone of early August 2012 on the marine planktonic ecosystem in the Pacific sector of the Arctic Ocean (PSA). Model results indicate that the cyclone influences the marine planktonic ecosystem by enhancing productivity on the shelves of the Chukchi, East Siberian, and Laptev seas during the storm. Although the cyclone's passage in the PSA lasted only a few days, the simulated biological effects on the shelves last 1 month or longer. At some locations on the shelves, primary productivity (PP) increases by up to 90% and phytoplankton biomass by up to 40% in the wake of the cyclone. The increase in zooplankton biomass is up to 18% on 31 August and remains 10% on 15 September, more than 1 month after the storm. In the central PSA, however, model simulations indicate a decrease in PP and plankton biomass. The biological gain on the shelves and loss in the central PSA are linked to two factors. (1) The cyclone enhances mixing in the upper ocean, which increases nutrient availability in the surface waters of the shelves; enhanced mixing in the central PSA does not increase productivity because nutrients there are mostly depleted through summer draw down by the time of the cyclone's passage. (2) The cyclone also induces divergence, resulting from the cyclone's low-pressure system that drives cyclonic sea ice and upper ocean circulation, which transports more plankton biomass onto the shelves from the central PSA. The simulated biological gain on the shelves is greater than the loss in the central PSA, and therefore, the production on average over the entire PSA is increased by the cyclone. Because the gain on the shelves is offset by the loss in the central PSA, the average increase over the entire PSA is moderate and lasts only about 10 days. The generally positive impact of cyclones on the marine ecosystem in the Arctic, particularly on the shelves, is likely to grow with increasing

  13. Determination of production biology of cladocera in a reservoir receiving hyperthermal effluents from a nuclear production reactor. [Par Pond

    Energy Technology Data Exchange (ETDEWEB)

    Vigerstad, T J

    1980-01-01

    The effects on zooplankton of residence in a cooling reservoir receiving hyperthermal effluents directly from a nuclear-production-reactor were studied. Rates of cladoceran population production were compared at two stations in the winter and summer of 1976 on Par Pond located on the Savannah River Plant, Aiken, SC. One station was located in an area of the reservoir directly receiving hyperthermal effluent (Station MAS) and the second was located about 4 km away in an area where surface temperatures were normal for reservoirs in the general geographical region (Station CAS). A non-parametric comparison between stations of standing stock and fecundity data for Bosmina longirostris, taken for the egg ratio model, was used to observe potential hyperthermal effluent effects. There was a statistically higher incidence of deformed eggs in the Bosmina population at Station MAS in the summer. Bosmina standing stock underwent two large oscillations in the winter and three large oscillations in the summer at Station MAS compared with two in the winter and one in the summer at Station CAS. These results are consistent with almost all other Par Pond studies which have found the two stations to be essentially similar in spectra composition but with some statistically significant differences in various aspects of the biology of the species.

  14. Radioimmunoassay for anaphylatoxins: a sensitive method for determining complement activation products in biological fluids

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, J.L.; Hugli, T.E.

    1984-01-01

    Activation of the blood complement system generates bioactive fragments called anaphylatoxins. The three anaphylatoxins C3a, C4a, and C5a are released during classical pathway activation while only C3a and C5a are released when the alternative pathway of complement is activated. Radioimmunoassays were designed to individually detect and quantitate the activation fragments C3a, C4a, and C5a in biological fluids without interference from the precursor molecules C3, C4, and C5. Kinetics of complement activation in fresh human serum exposed to the activators zymosan, heat-aggregated immunoglobulin, or cobra venom factor were monitored using the radioimmunoassay technique. For the first time, activation of components C3, C4, and C5 was followed simultaneously in a single serum sample. Analysis of the patterns and extent of anaphylatoxin formation during activation in serum may be used to screen for deficiencies or defects in the complement cascade. Levels of the anaphylatoxins in freshly drawn serum were much higher than levels detected in EDTA-plasma. Detection of low-level complement activation in patient's blood, urine, or synovial fluid, using anaphylatoxin formation as an indicator, may prove useful in signaling numerous forms of inflammatory reactions. The demonstration of anaphylatoxins in clinical samples is being recognized as a valuable diagnostic tool in monitoring the onset of immune disease.

  15. A retrosynthetic biology approach to metabolic pathway design for therapeutic production

    Directory of Open Access Journals (Sweden)

    Faulon Jean-Loup

    2011-08-01

    Full Text Available Abstract Background Synthetic biology is used to develop cell factories for production of chemicals by constructively importing heterologous pathways into industrial microorganisms. In this work we present a retrosynthetic approach to the production of therapeutics with the goal of developing an in situ drug delivery device in host cells. Retrosynthesis, a concept originally proposed for synthetic chemistry, iteratively applies reversed chemical transformations (reversed enzyme-catalyzed reactions in the metabolic space starting from a target product to reach precursors that are endogenous to the chassis. So far, a wider adoption of retrosynthesis into the manufacturing pipeline has been hindered by the complexity of enumerating all feasible biosynthetic pathways for a given compound. Results In our method, we efficiently address the complexity problem by coding substrates, products and reactions into molecular signatures. Metabolic maps are represented using hypergraphs and the complexity is controlled by varying the specificity of the molecular signature. Furthermore, our method enables candidate pathways to be ranked to determine which ones are best to engineer. The proposed ranking function can integrate data from different sources such as host compatibility for inserted genes, the estimation of steady-state fluxes from the genome-wide reconstruction of the organism's metabolism, or the estimation of metabolite toxicity from experimental assays. We use several machine-learning tools in order to estimate enzyme activity and reaction efficiency at each step of the identified pathways. Examples of production in bacteria and yeast for two antibiotics and for one antitumor agent, as well as for several essential metabolites are outlined. Conclusions We present here a unified framework that integrates diverse techniques involved in the design of heterologous biosynthetic pathways through a retrosynthetic approach in the reaction signature space

  16. Steam Reforming of Dimethyl Ether by Gliding Arc Gas Discharge Plasma for Hydrogen Production

    Institute of Scientific and Technical Information of China (English)

    王保伟; 孙启梅; 吕一军; 杨美琳; 闫文娟

    2014-01-01

    Gliding arc gas discharge plasma was used for the generation of hydrogen from steam reforming of di-methyl ether (DME). A systemic procedure was employed to determine the suitable experimental conditions. It was found that DME conversion first increased up to the maximum and then decreased slightly with the increase of added water and air. The increase of total feed gas flow rate resulted in the decrease of DME conversion and hy-drogen yield, but hydrogen energy consumption dropped down to the lowest as total feed gas flow rate increased to 76 ml·min-1. Larger electrode gap and higher discharge voltage were advantageous. Electrode shape had an impor-tant effect on the conversion of DME and production of H2. Among the five electrodes, electrode 2# with valid length of 55 mm and the radian of 34 degrees of the top electrode section was the best option, which enhanced ob-viously the conversion of DME.

  17. Plasma separation process facility for large-scale stable isotope production

    Energy Technology Data Exchange (ETDEWEB)

    Bigelow, T.S.; Collins, E.D.; Tracy, J.G. [Oak Ridge National Lab., TN (United States)

    1997-12-01

    A facility for large-scale separation of stable isotopes using the plasma separation process (PSP) is under development at the Oak Ridge National Laboratory. The PSP is capable of separating isotopes at a large throughput rate with medium purity product and at relatively low cost. The PSP has a number of convenient features that make it an attractive technology for general isotope separation purposes. Several isotopes for medical and industrial applications, including {sup 102}Pd, {sup 98}Mo, {sup 203}Tl, {sup 184}W, and others, are expected to be processed in this facility. The large throughput and low processing cost of the PSP will likely lead to new applications for stable isotopes. A description of this facility and its typical throughput capability is presented here.

  18. Transport processes and entropy production in toroidal plasmas with gyrokinetic electromagnetic turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Sugama, H.; Okamoto, M.; Horton, W.; Wakatani, M.

    1996-01-01

    Transport processes and resultant entropy production in magnetically confined plasmas are studied in detail for toroidal systems with gyrokinetic electromagnetic turbulence. The kinetic equation including the turbulent fluctuations are double-averaged over the ensemble and the gyrophase. The entropy balance equation is derived from the double-averaged kinetic equation with the nonlinear gyrokinetic equation for the fluctuating distribution function. The result clarifies the spatial transport and local production of the entropy due to the classical, neoclassical and anomalous transport processes, respectively. For the anomalous transport process due to the electromagnetic turbulence as well as the classical and neoclassical processes, the kinetic form of the entropy production is rewritten as the thermodynamic form, from which the conjugate pairs of the thermodynamic forces and the transport fluxes are identified. The Onsager symmetry for the anomalous transport equations is shown to be valid within the quasilinear framework. The complete energy balance equation, which takes account of the anomalous transport and exchange of energy due to the fluctuations, is derived from the ensemble-averaged kinetic equation. The intrinsic ambipolarity of the anomalous particle fluxes is shown to hold for the self-consistent turbulent electromagnetic fields satisfying Poisson`s equation and Ampere`s law. (author).

  19. Absolute production rate measurements of nitric oxide by an atmospheric pressure plasma jet (APPJ)

    Energy Technology Data Exchange (ETDEWEB)

    Pipa, A V; Bindemann, T; Foest, R; Kindel, E; Roepcke, J; Weltmann, K-D [Leibniz-Institut fuer Plasmaforschung and Technologie e.V. (INP), Felix-Hausdorff Strasse 2, D-17489 Greifswald (Germany)], E-mail: foest@inp-greifswald.de

    2008-10-07

    Tunable diode laser absorption spectroscopy (TDLAS) has been applied to measure the absolute production rate of NO molecules in the gas phase of an atmospheric pressure plasma jet (APPJ) operating at rf (13.56 MHz) in argon with small (up to 1%) admixtures of air. The resulting NO production rates were found to be in the range (0.1-80) x 10{sup -3} sccm or (0.05-35) x 10{sup 18} molecules s{sup -1} depending on the experimental conditions. Maximum rates were obtained at 0.2% air. For TDLAS measurements the APPJ was arranged inside an astigmatic multi-pass cell of Herriott type with 100 m absorption length. The insertion into a closed volume differs slightly from the normal, open operation with the jet propagating freely into air. Therefore, the measuring results are compared with optical emission of the open jet to verify equivalent experimental conditions. The dependence of the optical emission of NO (237 nm) on power and gas mixture has been measured. The similar shape of the dependence of absorption and emission signals gives evidence that the comparability of experimental conditions is sufficiently satisfied. It is concluded that the NO production rate of the APPJ in ambient air can be characterized using TDLAS and provides reliable results in spite of differing experimental conditions due to the set-up.

  20. In vitro cell-biological performance and structural characterization of selective laser sintered and plasma surface functionalized polycaprolactone scaffolds for bone regeneration

    Energy Technology Data Exchange (ETDEWEB)

    Van Bael, Simon, E-mail: simon.vanbael@mech.kuleuven.be [Department of Mechanical Engineering, Division of Production Engineering, Machine Design and Automation, Katholieke Universiteit Leuven, Celestijnenlaan 300b, 3001 Leuven (Belgium); Department of Mechanical Engineering, Division of Biomechanics and Engineering Design, Katholieke Universiteit Leuven, Celestijnenlaan 300c, bus 2419, 3001 Heverlee (Belgium); Prometheus, Division of Skeletal Tissue Engineering, Katholieke Universiteit Leuven, O and N 1, Herestraat 49, bus 813, 3000 Leuven (Belgium); Desmet, Tim [Polymer Chemistry and Biomaterials Research Group, Ghent University, Krijgslaan 281 S4 Bis, Ghent, 9000 (Belgium); Research Unit Plasma Technology (RUPT), Department of Applied Physics, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Chai, Yoke Chin [Prometheus, Division of Skeletal Tissue Engineering, Katholieke Universiteit Leuven, O and N 1, Herestraat 49, bus 813, 3000 Leuven (Belgium); Pyka, Gregory [Prometheus, Division of Skeletal Tissue Engineering, Katholieke Universiteit Leuven, O and N 1, Herestraat 49, bus 813, 3000 Leuven (Belgium); Department of Metallurgy and Materials Engineering, Katholieke Universiteit Leuven, Kasteelpark Arenberg 44, bus 2450, 3001 Leuven (Belgium); Dubruel, Peter [Polymer Chemistry and Biomaterials Research Group, Ghent University, Krijgslaan 281 S4 Bis, Ghent, 9000 (Belgium); Research Unit Plasma Technology (RUPT), Department of Applied Physics, Faculty of Engineering, Ghent University, Jozef Plateaustraat 22, 9000 Ghent (Belgium); Kruth, Jean-Pierre [Department of Mechanical Engineering, Division of Production Engineering, Machine Design and Automation, Katholieke Universiteit Leuven, Celestijnenlaan 300b, 3001 Leuven (Belgium); Schrooten, Jan [Prometheus, Division of Skeletal Tissue Engineering, Katholieke Universiteit Leuven, O and N 1, Herestraat 49, bus 813, 3000 Leuven (Belgium)

    2013-08-01

    In the present study a structural characterization and in vitro cell-biological evaluation was performed on polycaprolactone (PCL) scaffolds that were produced by the additive manufacturing technique selective laser sintering (SLS), followed by a plasma-based surface modification technique, either non-thermal oxygen plasma or double protein coating, to functionalize the PCL scaffold surfaces. In the first part of this study pore morphology by means of 2D optical microscopy, surface chemistry by means of hydrophilicity measurement and X-ray photoelectron spectroscopy, strut surface roughness by means of 3D micro-computed tomography (CT) imaging and scaffold mechanical properties by means of compression testing were evaluated before and after the surface modifications. The results showed that both surface modifications increased the PCL scaffold hydrophilicity without altering the morphological and mechanical properties. In the second part of this study the in vitro cell proliferation and differentiation of human osteoprogenitor cells, over 14 days of culture in osteogenic and growth medium were investigated. The O{sub 2} plasma modification gave rise to a significant lower in vitro cell proliferation compared to the untreated and double protein coated scaffolds. Furthermore the double protein coating increased in vitro cell metabolic activity and cell differentiation compared to the untreated and O{sub 2} plasma PCL scaffolds when OM was used. - Highlights: • Polycaprolactone scaffolds are produced with selective laser sintering. • 2 types of plasma based surface functionalization were applied. • Plasma had no significant effect on strut roughness and pore morphology. • Plasma improved surface hydrophilicity. • In vitro cell differentiation increased with plasma protein coated functionalization.

  1. Molecular plasma deposition: biologically inspired nanohydroxyapatite coatings on anodized nanotubular titanium for improving osteoblast density

    Directory of Open Access Journals (Sweden)

    Balasundaram G

    2015-01-01

    Full Text Available Ganesan Balasundaram,1 Daniel M Storey,1 Thomas J Webster2,3 1Chameleon Scientific, Longmont, CO, USA; 2Department of Chemical Engineering, Northeastern University, Boston, MA, USA; 3Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia Abstract: In order to begin to prepare a novel orthopedic implant that mimics the natural bone environment, the objective of this in vitro study was to synthesize nanocrystalline hydroxyapatite (NHA and coat it on titanium (Ti using molecular plasma deposition (MPD. NHA was synthesized through a wet chemical process followed by a hydrothermal treatment. NHA and micron sized hydroxyapatite (MHA were prepared by processing NHA coatings at 500°C and 900°C, respectively. The coatings were characterized before and after sintering using scanning electron microscopy, atomic force microscopy, and X-ray diffraction. The results revealed that the post-MPD heat treatment of up to 500°C effectively restored the structural and topographical integrity of NHA. In order to determine the in vitro biological responses of the MPD-coated surfaces, the attachment and spreading of osteoblasts (bone-forming cells on the uncoated, NHA-coated, and MHA-coated anodized Ti were investigated. Most importantly, the NHA-coated substrates supported a larger number of adherent cells than the MHA-coated and uncoated substrates. The morphology of these cells was assessed by scanning electron microscopy and the observed shapes were different for each substrate type. The present results are the first reports using MPD in the framework of hydroxyapatite coatings on Ti to enhance osteoblast responses and encourage further studies on MPD-based hydroxyapatite coatings on Ti for improved orthopedic applications. Keywords: hydroxyapatite, anodization, nanotechnology

  2. [The determination of the natural content of chemical elements in human biological objects (liver, kidney, stomach) by mass spectrometry with inductively coupled plasma].

    Science.gov (United States)

    Luzanova, I S; Svetlolobov, D Iu; Zorin, Iu V

    2014-01-01

    The objective of the present work was to continue the studies of the sites of concentration of the chemical elements corresponding to normal homeostasis in human biological objects by mass spectrometry with inductively coupled plasma. The study yielded the data on the natural content of 27 elements in the cadaveric liver, kidney, and stomach. It is recommended to use these findings as the reference parameters corresponding to normal homeostasis.

  3. Biological re-cultivation of industrial technological waste banks after steel production

    Science.gov (United States)

    Sokolovska, Maria; Zhiyanski, Miglena; Bech, Jaume

    2010-05-01

    The problem of re-cultivation of disturbed lands, after the creation of waste banks, is very important and of great scientific interest. The studies on the effectiveness of biological re-cultivation are focused mainly on activities and techniques for the acceleration of soil formation processes as. The relationship between substrate and plants is also studied, in order to create modern biotechnologies and contributes to the remediation of the re-cultivated lands within the territorial system. In this work we have studied three parts of an industrial waste bank named "The 7th of September" located in the green system of Sofia - Pernik agglomeration in Bulgaria. It consists of technological wastes produced by the steel industry. Its area of 20 dca is of special local importance. The aim of this study was to propose an appropriate technology for the biological re-cultivation, which could take place after all production activities had ceased. To achieve this aim a detailed study on the characteristics of climatic elements was carried out focusing on precipitation - limiting factor for future afforestation of waste banks. Analyses on hydro-physical and chemical parameters of substrates were undertaken in order to elaborate recommendations for their improvement and utility in biological re-cultivation. Here we present the characteristics of the vegetation which existed before the production activities and the approaches for choice of tree species in afforestation with different schemes and methods applied. On the basis of this study we were able to establish that the hydrological properties of substrates are quite similar to those of natural soils in the region. The variations obtained for some soil substrate layers were not significant. In relation to this we also outlined the quantity of organic matter and nutrient elements in waste banks as determining parameters for further biological re-cultivation. The studied site is located in the lower forest zone of the country

  4. Future Food Production System Development Pulling from Space Biology Crop Growth Testing in Veggie

    Science.gov (United States)

    Massa, G. D.; Romeyn, M. W.; Fritsche, R. F.

    2017-01-01

    lessons, as we learn about growing at different scales and move toward developing systems that require less launch mass. Veggie will be used as a test bed for novel food production technologies. Veggie is a relatively simple precursor food production system but the knowledge gained from space biology validation tests in Veggie will have far reaching repercussions on future exploration food production.

  5. Analysis of Pregnancy-Associated Plasma Protein A Production in Human Adult Cardiac Progenitor Cells

    Directory of Open Access Journals (Sweden)

    Piera D’Elia

    2013-01-01

    Full Text Available IGF-binding proteins (IGFBPs and their proteases regulate IGFs bioavailability in multiple tissues. Pregnancy-associated plasma protein A (PAPP-A is a protease acting by cleaving IGFBP2, 4, and 5, regulating local bioavailability of IGFs. We have previously shown that IGFs and IGFBPs are produced by human adult cardiac progenitor cells (haCPCs and that IGF-1 exerts paracrine therapeutic effects in cardiac cell therapy with CPCs. Using immunofluorescence and enzyme immunoassays, we firstly report that PAPP-A is produced and secreted in surprisingly high amounts by haCPCs. In particular, the homodimeric, enzymatically active, PAPP-A is secreted in relevant concentrations in haCPC-conditioned media, while the enzymatically inactive PAPPA/proMBP complex is not detectable in the same media. Furthermore, we show that both homodimeric PAPP-A and proMBP can be detected as cell associated, suggesting that the previously described complex formation at the cell surface does not occur easily, thus positively affecting IGF signalling. Therefore, our results strongly support the importance of PAPP-A for the IGFs/IGFBPs/PAPP-A axis in CPCs biology.

  6. When do tissues and cells become products? Regulatory oversight of emerging biological therapies.

    Science.gov (United States)

    Farrugia, Albert

    2006-01-01

    Although therapeutics derived from biological sources have been subjected to regulatory oversight for some time, the products used in transplantation procedures have historically been exempt from this oversight. These products have been viewed as being part of medical practice rather than as the result of mainstream pharmaceutical manufacture. Furthermore, their unique source makes them difficult to assess in traditional regulatory systems based on the tenets of pharmaceutical quality control. With the increasing use of transplantation therapies to both replace dysfunctional organs and to influence genetic and metabolic processes, public health concerns on these therapies have increased. In addition, it is recognized that therapeutic claims for some of these interventions need to be properly assessed. These considerations have led the established regulatory agencies of the developed world to develop new regulatory paradigms for the products of transplantation practice. While a number of concerns have driven these developments, the minimization of infectious disease risk remains the paramount driver for introducing these regulatory systems. More than the regulation of medicines and medical devices manufactured in traditional pharmaceutical modes, the regulation of cell and tissue products is intimately linked to areas of public health policy and funding. This places regulators in a challenging position as they attempt to reconcile their roles as independent assessors with the needs of the overall public health framework. This is particularly difficult when considering measures which may affect access to life saving therapies. Regulators have recognized the need to assess these therapies through systems which incorporate consideration of risk-benefit ratios and include mechanisms for transparent and accountable release of products when full compliance to traditional concepts of manufacturing practice is not possible.

  7. A model of the ocean iron cycle and its influence on biological production

    Science.gov (United States)

    Dutkiewicz, S.; Parekh, P.; Follows, M.

    2003-04-01

    Biological productivity in large regions of the ocean, specifically high nutrient, low chlorophyll regions, is limited by the deficit in iron relative to other nutrients. We have developed a parameterization of the iron cycle of the world's oceans which attempts to explicitly represent the processes by which this deficit in iron occurs. We have implemented this parameterization in the context of the MIT three dimensional global ocean model and examined the consequences for nutrient distributions, new production and primary production. The iron model parameterizes the mechanisms of scavenging of iron onto sinking particles and complexation with an organic ligand and is driven by specified aeolian flux patterns. First, using an idealized representation of export production, limited by light, phosphate and iron, the model reproduces the broad features of the observed ocean phosphate and iron distributions. We replace the simplified export parameterization with an explicit, but highly idealized, ecosystem model. The model represents a simplified food web with two phytoplankton size classes and a single grazer. The base currency for this model is phosphorus, but the larger phytoplankton class (i.e. diatoms) is also limited by silica. Both classes are limited by the availability of iron. The results of this model are also generally consistent with the observed patterns of phosphate and iron. In addition, the model captures the broad features of the distributions and cycles of silica, chlorophyll and primary production. We will also explore the sensitivities of this model to the forcing fields (e.g. aeolian iron flux) and parameter choices of the ecosystem model. This model represents a step towards the explicit representation of the ocean iron cycle, and its biogeochemical influences, in global biogeochemical models.

  8. Biological and Energy Productivity of Natural Spruce Forests in the Ukrainian Carpathians

    Directory of Open Access Journals (Sweden)

    R. D. Vasilishyn

    2014-10-01

    Full Text Available The modern practice of forestry production in Ukraine, which is in the process of implementing the conceptual changes in forest management and harmonization of its basic approaches to the basics of sustainable development, requires a significant expansion of the current regulatory and informational tools used to assess the ecological functions of forests. For this purpose, during the 2012–2014, as part of an international project GESAPU, models and tables of bioproductivity for forest tree species in Ukraine were completed. The article presents the results of modeling the dynamics of the conversion coefficients for the main components of phytomass of modal natural spruce forests of the Carpathian region of Ukraine based on information from 32 plots in the database of «Forest Phytomass of Ukraine». According to the state forest accounting of Ukraine as of January 1, 2011, the spruce forests in the Ukrainian Carpathians cover an area of 426.2 thousand ha, 45 % of which are spruce of natural origin. To evaluate the productivity of modal dynamics of pure and mixed spruce stands, the study developed models of the stock and overall productivity, derived by Bertalanffy growth function. On the basis of these models, normative reference tables of biological productivity of natural modal spruce forests of the Ukrainian Carpathians were developed. To successfully meet the challenges of evaluating the energy possibilities of forestry of Ukraine, the study used tables of energetic productivity of investigated stands. Built on the basis of the tables of bioproductivity, they reflect the dynamic processes of energy storage in the phytomass components and can be used in forest management to predict volumes of energetic woods.

  9. Use of chemicals and biological products in Asian aquacultire and their potential environmental risks: a critical review

    NARCIS (Netherlands)

    Rico, A.; Satapornvanit, K.; Haque, M.M.; Min, J.; Nguyen, P.T.; Telfer, T.; Brink, van den P.J.

    2012-01-01

    Over the past few decades, Asian aquaculture production has intensified rapidly through the adoption of technological advances, and the use of a wide array of chemical and biological products to control sediment and water quality and to treat and prevent disease outbreaks. The use of chemicals in aq

  10. Biological butanol production from microalgae-based biodiesel residues by Clostridium acetobutylicum.

    Science.gov (United States)

    Cheng, Hai-Hsuan; Whang, Liang-Ming; Chan, Kun-Chi; Chung, Man-Chien; Wu, Shu-Hsien; Liu, Cheng-Pin; Tien, Shih-Yuan; Chen, Shan-Yuan; Chang, Jo-Shu; Lee, Wen-Jhy

    2015-05-01

    This study conducted batch experiments to evaluate the potential of butanol production from microalgae biodiesel residues by Clostridium acetobutylicum. The results indicated that with 90 g/L of glucose as the sole substrate the highest butanol yield of 0.2 g/g-glucose was found, but the addition of butyrate significantly enhanced the butanol yield. The highest butanol yield of 0.4 g/g-glucose was found with 60 g/L of glucose and 18 g/L of butyrate. Using microalgae biodiesel residues as substrate, C. acetobutylicum produced 3.86 g/L of butanol and achieved butanol yield of 0.13 g/g-carbohydrate via ABE fermentation, but the results indicated that approximately one third of carbohydrate was not utilized by C. acetobutylicum. Biological butanol production from microalgae biodiesel residues can be possible, but further research on fermentation strategies are required to improve production yield. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. DNA assembler: a synthetic biology tool for characterizing and engineering natural product gene clusters.

    Science.gov (United States)

    Shao, Zengyi; Zhao, Huimin

    2012-01-01

    The majority of existing antibacterial and anticancer drugs are natural products or their derivatives. However, the characterization and engineering of these compounds are often hampered by limited ability to manipulate the corresponding biosynthetic pathways. Recently, we developed a genomics-driven, synthetic biology-based method, DNA assembler, for discovery, characterization, and engineering of natural product biosynthetic pathways (Shao, Luo, & Zhao, 2011). By taking advantage of the highly efficient yeast in vivo homologous recombination mechanism, this method synthesizes the entire expression vector containing the target biosynthetic pathway and the genetic elements needed for DNA maintenance and replication in individual hosts in a single-step manner. In this chapter, we describe the general guidelines for construct design. By using two distinct biosynthetic pathways, we demonstrate that DNA assembler can perform multiple tasks, including heterologous expression, introduction of single or multiple point mutations, scar-less gene deletion, generation of product derivatives, and creation of artificial gene clusters. As such, this method offers unprecedented flexibility and versatility in pathway manipulations.

  12. Fenofibrate increases very low density lipoprotein triglyceride production despite reducing plasma triglyceride levels in APOE*3-Leiden.CETP mice.

    Science.gov (United States)

    Bijland, Silvia; Pieterman, Elsbet J; Maas, Annemarie C E; van der Hoorn, José W A; van Erk, Marjan J; van Klinken, Jan B; Havekes, Louis M; van Dijk, Ko Willems; Princen, Hans M G; Rensen, Patrick C N

    2010-08-13

    The peroxisome proliferator-activated receptor alpha (PPARalpha) activator fenofibrate efficiently decreases plasma triglycerides (TG), which is generally attributed to enhanced very low density lipoprotein (VLDL)-TG clearance and decreased VLDL-TG production. However, because data on the effect of fenofibrate on VLDL production are controversial, we aimed to investigate in (more) detail the mechanism underlying the TG-lowering effect by studying VLDL-TG production and clearance using APOE*3-Leiden.CETP mice, a unique mouse model for human-like lipoprotein metabolism. Male mice were fed a Western-type diet for 4 weeks, followed by the same diet without or with fenofibrate (30 mg/kg bodyweight/day) for 4 weeks. Fenofibrate strongly lowered plasma cholesterol (-38%) and TG (-60%) caused by reduction of VLDL. Fenofibrate markedly accelerated VLDL-TG clearance, as judged from a reduced plasma half-life of glycerol tri[(3)H]oleate-labeled VLDL-like emulsion particles (-68%). This was associated with an increased post-heparin lipoprotein lipase (LPL) activity (+110%) and an increased uptake of VLDL-derived fatty acids by skeletal muscle, white adipose tissue, and liver. Concomitantly, fenofibrate markedly increased the VLDL-TG production rate (+73%) but not the VLDL-apolipoprotein B (apoB) production rate. Kinetic studies using [(3)H]palmitic acid showed that fenofibrate increased VLDL-TG production by equally increasing incorporation of re-esterified plasma fatty acids and liver TG into VLDL, which was supported by hepatic gene expression profiling data. We conclude that fenofibrate decreases plasma TG by enhancing LPL-mediated VLDL-TG clearance, which results in a compensatory increase in VLDL-TG production by the liver.

  13. Applying complex models to poultry production in the future--economics and biology.

    Science.gov (United States)

    Talpaz, H; Cohen, M; Fancher, B; Halley, J

    2013-09-01

    The ability to determine the optimal broiler feed nutrient density that maximizes margin over feeding cost (MOFC) has obvious economic value. To determine optimal feed nutrient density, one must consider ingredient prices, meat values, the product mix being marketed, and the projected biological performance. A series of 8 feeding trials was conducted to estimate biological responses to changes in ME and amino acid (AA) density. Eight different genotypes of sex-separate reared broilers were fed diets varying in ME (2,723-3,386 kcal of ME/kg) and AA (0.89-1.65% digestible lysine with all essential AA acids being indexed to lysine) levels. Broilers were processed to determine carcass component yield at many different BW (1.09-4.70 kg). Trial data generated were used in model constructed to discover the dietary levels of ME and AA that maximize MOFC on a per broiler or per broiler annualized basis (bird × number of cycles/year). The model was designed to estimate the effects of dietary nutrient concentration on broiler live weight, feed conversion, mortality, and carcass component yield. Estimated coefficients from the step-wise regression process are subsequently used to predict the optimal ME and AA concentrations that maximize MOFC. The effects of changing feed or meat prices across a wide spectrum on optimal ME and AA levels can be evaluated via parametric analysis. The model can rapidly compare both biological and economic implications of changing from current practice to the simulated optimal solution. The model can be exploited to enhance decision making under volatile market conditions.

  14. Optimisation of the biological pretreatment of wheat straw with white-rot fungi for ethanol production.

    Science.gov (United States)

    López-Abelairas, M; Álvarez Pallín, M; Salvachúa, D; Lú-Chau, T; Martínez, M J; Lema, J M

    2013-09-01

    The biological pretreatment of lignocellulosic biomass for the production of bioethanol is an environmentally friendly alternative to the most frequently used process, steam explosion (SE). However, this pretreatment can still not be industrially implemented due to long incubation times. The main objective of this work was to test the viability of and optimise the biological pretreatment of lignocellulosic biomass, which uses ligninolytic fungi (Pleurotus eryngii and Irpex lacteus) in a solid-state fermentation of sterilised wheat straw complemented with a mild alkali treatment. In this study, the most important parameters of the mechanical and thermal substrate conditioning processes and the most important parameters of the fungal fermentation process were optimised to improve sugar recovery. The largest digestibilities were achieved with fermentation with I. lacteus under optimised conditions, under which cellulose and hemicellulose digestibility increased after 21 days of pretreatment from 16 to 100 % and 12 to 87 %, respectively. The maximum glucose yield (84 %) of cellulose available in raw material was obtained after only 14 days of pretreatment with an overall ethanol yield of 74 % of the theoretical value, which is similar to that reached with SE.

  15. Synthetic biology for production of natural and new-to-nature terpenoids in photosynthetic organisms.

    Science.gov (United States)

    Arendt, Philipp; Pollier, Jacob; Callewaert, Nico; Goossens, Alain

    2016-07-01

    With tens of thousands of characterized members, terpenoids constitute the largest class of natural compounds that are synthesized by all living organisms. Several terpenoids play primary roles in the maintenance of cell membrane fluidity, as pigments or as phytohormones, but most of them function as specialized metabolites that are involved in plant resistance to herbivores or plant-environment interactions. Terpenoids are an essential component of human nutrition, and many are economically important pharmaceuticals, aromatics and potential next-generation biofuels. Because of the often low abundance in their natural source, as well as the demand for novel terpenoid structures with new or improved bioactivities, terpenoid biosynthesis has become a prime target for metabolic engineering and synthetic biology projects. In this review we focus on the creation of new-to-nature or tailor-made plant-derived terpenoids in photosynthetic organisms, in particular by means of combinatorial biosynthesis and the activation of silent metabolism. We reflect on the characteristics of different potential photosynthetic host organisms and recent advances in synthetic biology and discuss their utility for the (heterologous) production of (novel) terpenoids.

  16. Removal of anaerobic soluble microbial products in a biological activated carbon reactor.

    Science.gov (United States)

    Dong, Xiaojing; Zhou, Weili; He, Shengbing

    2013-09-01

    The soluble microbial products (SMP) in the biological treatment effluent are generally of great amount and are poorly biodegradable. Focusing on the biodegradation of anaerobic SMP, the biological activated carbon (BAC) was introduced into the anaerobic system. The experiments were conducted in two identical lab-scale up-flow anaerobic sludge blanket (UASB) reactors. The high strength organics were degraded in the first UASB reactor (UASB1) and the second UASB (UASB2, i.e., BAC) functioned as a polishing step to remove SMP produced in UASB1. The results showed that 90% of the SMP could be removed before granular activated carbon was saturated. After the saturation, the SMP removal decreased to 60% on the average. Analysis of granular activated carbon adsorption revealed that the main role of SMP removal in BAC reactor was biodegradation. A strain of SMP-degrading bacteria, which was found highly similar to Klebsiella sp., was isolated, enriched and inoculated back to the BAC reactor. When the influent chemical oxygen demand (COD) was 10,000 mg/L and the organic loading rate achieved 10 kg COD/(m3 x day), the effluent from the BAC reactor could meet the discharge standard without further treatment. Anaerobic BAC reactor inoculated with the isolated Klebsiella was proved to be an effective, cheap and easy technical treatment approach for the removal of SMP in the treatment of easily-degradable wastewater with COD lower than 10,000 mg/L.

  17. Production of Some Biologically Active Secondary Metabolites From Marine-derived Fungus Varicosporina ramulosa

    Directory of Open Access Journals (Sweden)

    Atalla, M. M.

    2008-01-01

    Full Text Available In a screening of fungal isolates associated with marine algae collected from Abou-keer, Alexanderia during the four seasons of 2004, to obtain new biologically active compounds. Varicosporina ramulosa isolate was identified and selected as a producer of 13 compounds. Out of 13 pure compounds produced, compounds 3 and 10 were considered as antibacterial and antifungal compounds, respectively as they were active against gram positive, gram negative bacteria and a fungus. Optimization of conditions (fermentation media, incubation period, temperature, initial pH, aeration levels which activate compounds 3 and 10 production were studied. Also the spectral properties (UV, MS, GC/MS, IR and 1H-NMR of the purified compounds were determined. Compound 3 suggested to be dibutyl phthalate and compound 10 may be ergosterol or one of its isomers. Biological evaluation of the two compounds towards 6 different types of tumor cell lines showed weak effect of compound 3 at different concentrations on the viable cell count of the different tumor cell lines. While compound 10 showed different activities against the viable cell count of the 6 different tumor cell lines. It kills 50% of the viable infected liver and lung cells at concentrations equal to 99.7 µg/mL, 74.9µg/mL, respectively. Compound 10 can be recommended as new anticancer compounds.

  18. Removal of disinfection by-products formation potential by biologically intensified process

    Institute of Scientific and Technical Information of China (English)

    AN Dong; LI Wei-guang; CUI Fu-yi; HE Xin; ZHANG Jin-song

    2005-01-01

    The removal of disinfection by-products formation potential(DBPFP) in artificially intensified biological activated carbon(IBAC) process which is developed on the basis of traditional ozone granular activated carbon was evaluated. By IBAC removals of 31% and 68% for THMFP and HAAFP were obtained respectively. Under identical conditions, the removals of the same substances were 4% and 32% respectively only by the granular activated carbon(GAC) process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. A clear linear correlation ( R2 = 0.9562 and R2 = 0.9007) between DOC HAAFP removal rate and Empty Bed Contact Time(EBCT) of IBAC process was observed, while that between THMFP removal rate and EBCT of GAC was R2 = 0.9782. In addition certain linear correlations between THMFP, HAAFP and UV254 ( R2 = 0.855 and R2 = 0.7702) were found for the treated water. For IBAC process there are also more advantages such as long backwashing cycle time, low backwashing intensity and prolonging activated carbon lifetime and so on.

  19. Back to the Roots: Prediction of Biologically Active Natural Products from Ayurveda Traditional Medicine

    DEFF Research Database (Denmark)

    Polur, Honey; Joshi, Tejal; Workman, Christopher

    2011-01-01

    Ayurveda, the traditional Indian medicine is one of the most ancient, yet living medicinal traditions. In the present work, we developed an in silico library of natural products from Ayurveda medicine, coupled with structural information, plant origin and traditional therapeutic use. Following this....... We hereby present a number of examples where the traditional medicinal use of the plant matches with the medicinal use of the drug that is structurally similar to a plant component. With this approach, we have brought to light a number of obscure compounds of natural origin (e.g. kanugin......, we compared their structures with those of drugs from DrugBank and we constructed a structural similarity network. Information on the traditional therapeutic use of the plants was integrated in the network in order to provide further evidence for the predicted biologically active natural compounds...

  20. Discharge of pharmaceutical products (PPs) through a conventional biological sewage treatment plant: MECs vs PECs?

    Science.gov (United States)

    Coetsier, C M; Spinelli, S; Lin, L; Roig, B; Touraud, E

    2009-07-01

    Pharmaceuticals for human use are consumed in significant quantities and their occurrence in aquatic systems has been reported by a number of authors. In the context of environmental risk assessment, there is an increasing interest in evaluating the discharge of pharmaceutical products to surface waters through sewage treatment plants (STP). This case study was carried out on a conventional biological treatment plant (Alès, France) and focused on a set of eleven drugs representing the main therapeutic classes. Measured environmental concentrations (MECs) range from the low ng L(-1) to 1.5 microg L(-1) in effluent and up to few hundred ng L(-1) in receiving surface waters. There is a good agreement between MEC and predicted environmental concentration (PEC) values for seven of the eleven investigated drugs in STP effluent. There is not such a good match between PEC and MEC values in surface waters, and this highlights the limits of this approach, at the local scale.