Quality assurance applied to Radiological Protection Program of CPHR - Centro de Proteccion Y Higiene de las Radiaciones; Aseguramiento de la calidad aplicado al programa de proteccion radiologica del CPHR - Centro de Proteccion y Higiene de las Radiaciones

Energy Technology Data Exchange (ETDEWEB)

Marrero Garcia, M.; Jova Sed, L.; Domenech Nieves, H.; Hernandez Sainz, A. [Centro de Proteccion y Higiene de las Radiaciones, La Habana (Cuba)

2001-07-01

The quality assurance in establishment that use ionizing radiation sources, is according to international recommendations of radiation protection programs. This work intends to present the experience of the Centro de Proteccion y Higiene de las Radiaciones (CPHR), in the implementation of requirements of quality in their Radiological Protection Program.

The rebranding of Electrica Soluziona SA - a case study

Directory of Open Access Journals (Sweden)

Monica GOMOESCU

2016-07-01

Full Text Available This article intends to present the design and implementation stages of a rebranding campaign that took place in the Electrica Soluziona SA company. The rebranding targets a company that provides consultancy services and software solutions and that underwent a change of its main shareholders structure, as it was taken over by Indra Group. After being taken over by Indra, Electrica Soluziona has considerably enlarged its product portfolio and the market segments targeted. Thus, it was mandatory to define a complex rebranding campaign. The rebranding process was not determined only by the broadening of activity, but also by the change of visual identity elements, along with the desire of repositioning.

Protecciones solares y su implicancia en la demanda energética: caso edificio público en Concepción, Chile

OpenAIRE

Jazmín Jara Córdova

2015-01-01

Determinar las ganancias solares en el vano-ventana con protecciones solares y analizar el comportamiento térmico en un edificio es un tema relativamente nuevo en el ámbito chileno. No obstante, el inadecuado manejo del control solar, en algunos casos, genera problemas de sobrecalentamiento al interior de la edificación. Esta investigación busca establecer un procedimiento que permita evaluar cuatro tipos de protecciones solares y analizar sus implicancias energéticas en un edificio público, ...

Utilización de la simulación digital de protecciones eléctricas en los transformadores de potencia de las industrias niquelíferas de Moa

Directory of Open Access Journals (Sweden)

Antonio Martínez-García

2005-03-01

Full Text Available Las producciones de régimen continuo, como las empresas de níquel, requieren del trabajo estable de los Sistemas Eléctricos de Potencia (SEP frente a las averías, por lo que la instalación de protecciones que actúen u operen solo cuando éstas ocurran, desconectando rápidamente la zona o equipo averiado, se hace necesaria para evitar la propagación del daño por todo el SEP. El funcionamiento inadecuado de las protecciones incrementa los costos de producción en una industria; para garantizar el buen funcionamiento de las mismas se requieren herramientas como los simuladores digitales de protección. Este artículo trata de la modelación y simulación de las protecciones eléctricas que utilizan los transformadores de potencia en dos industrias niqueleras cubanas. Mediante el empleo de una Biblioteca Virtual de Protecciones Eléctricas creada en MATLAB/SIMULINK, se analiza el comportamiento de los sistemas de protecciones instalados en ambas industrias, se detectan deficiencias y se ofrecen las soluciones adecuadas para evitar tanto el aumento de los costos de mantenimiento como las desconexiones inoportunas u operaciones incorrectas.

Estudio de la coordinación de las protecciones por métodos computarizados aplicados al centro comercial mall del sur

OpenAIRE

Ramírez Rivera, Anthony; Inde Yanzapanta, Luis

2011-01-01

En la actualidad muchas de las empresas e industrias cuentan con sistemas eléctricos antiguos que no están sujetos a una coordinación de sus protecciones eléctricas o en su defecto cuentan con coordinaciones fuera de rangos establecidos y como producto de esto se tiene desde perdidas del fluido eléctrico innecesarias hasta incendios por fallas eléctricas no despejadas correctamente. El presente trabajo de investigación trata sobre la coordinación de las protecciones eléctricas en un sistema i...

The Biogas from bio-energy electrical power plant of Nuevo Leon; Central electrica de biogas de bioenergia de Nuevo Leon

Energy Technology Data Exchange (ETDEWEB)

Arvizu F, Jose L [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Saldana M, Jaime L [Sistemas de Energia Internacional S.A. de C.V. (Mexico)

2005-07-01

The biogas from bio-energy electrical power plant of Nuevo Leon represents, in all the national territory, the first experience on the advantage of biogas emitted by the sanitary landfills for the generation of electrical energy. Therefore, one of the specific objectives of this paper is the one of diffusion and reproduction of the same one in other cities of Mexico and Latin America. The project is framed within the world-wide policies on the control of emissions for the reduction of the greenhouse effect gases (GEG) and its impact in the global climatic change. The gas emitted by the trash sanitary landfills, commonly known as biogas, is a gas mixture derived from the decomposition of the organic matter of the municipal trash by microorganisms in anaerobic conditions. Biogas generated in the sanitary landfills has a methane content of 55% and a 35% of carbon dioxide. The balance 10% is made up of water steam, hydrogen, nitrogen, oxygen, hydrogen sulfur and other gases in minimum amounts. [Spanish] La Central Electrica de Biogas de Bioenergia de Nuevo Leon representa, en todo el territorio nacional, la primera experiencia sobre el aprovechamiento del biogas emitido por los rellenos sanitarios para la generacion de energia electrica. Por esta razon, uno de los objetivos especificos de este trabajo es la de difusion y reproduccion del mismo en otras ciudades de Mexico y Latinoamerica. El proyecto esta enmarcado dentro de las politicas mundiales sobre el control de emisiones para la reduccion de los gases de efecto invernadero (GEI) y su impacto en el cambio climatico global. El gas emitido por la basura dispuesta en los rellenos sanitarios, comunmente conocido como biogas, es una mezcla de gases derivado de la descompensacion de la materia organica de la basura municipal por microorganismos en condiciones anaerobias. El biogas generado en los rellenos sanitarios tiene un contenido de metano del 55% y un 35% de bioxido de carbono. El 10% restante se compone de vapor

Towards a distributed electric generation scheme with non-conventional energies; Hacia un esquema de generacion electrica distribuida con energias no convencionales

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

Several factors contributed to the existence of large electric systems as we know them today, such as: the increase of the electric demand by the advancement of the industrial development, the appearance of electric equipment, and household devices and by the advancement in the engineering systems, just to mention a few of them. With all this, the third part of the World population still does not have access to the electricity service. The efforts that the small electric enterprises perform to carry the service up to the site where it is required, every day time becomes more expensive and less effective. Exhausted by the weight of a huge economic debt, many electric utilities of the developing countries find each time more difficult to obtain financing to extend the power lines. This situation becomes still more serious with the present privatization scheme of the electric utilities. Although new technologies are being developed to counteract the negative effects caused by the large electricity generation power plants, the society seems to begin to show preferences for more benign to the environment options. The scheme of distributed generation can be given in to modalities: By means of isolated systems in remote sites, where there is not access to the conventional services; and with systems interconnected with the electric network where this is available [Espanol] Varios factores contribuyeron a la aparicion de los grandes sistemas electricos como los conocemos hoy en dia, tales como: el crecimiento de la demanda electrica por el avance del desarrollo industrial, la aparicion de equipos electricos y aparatos electrodomesticos y por avances en la ingenieria de los sistemas, por mencionar algunos. Con todo ello, la tercera parte de la poblacion mundial no tiene aun acceso al servicio electrico. Los esfuerzos que realizan las companias electricas para llevar el servicio hasta donde se requiere, resultan cada vez mas costosos y menos efectivos. Agobiadas por el peso

The Physical Protection of Nuclear Material and Nuclear Facilities; Proteccion Fisica De Los Materiales Y Las Instalaciones Nucleares

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-06-15

Physical protection against the theft or unauthorized diversion of nuclear materials and against the sabotage of nuclear facilities by individuals or groups has long been a matter of national and international concern. Although responsibility for establishing and operating a comprehensive physical protection system for nuclear materials and facilities within a State rests entirely with the Government of that State, it is not a matter of indifference to other States whether and to what extent that responsibility is fulfilled. Physical protection has therefore become a matter of international concern and co-operation. The need for international co-operation becomes evident in situations where the effectiveness of physical protection in one State depends on the taking by other States also of adequate measures to deter or defeat hostile actions against nuclear facilities and nuclear materials, particularly when such materials are transported across national frontiers [Spanish] La proteccion fisica contra el robo o la desviacion no autorizada de materiales nucleares y contra el sabotaje de las instalaciones nucleares por parte de individuos o grupos es motivo de preocupacion nacional e internacional desde hace mucho tiempo. Aunque la obligacion de crear y hacer funcionar un sistema completo de proteccion fisica de las instalaciones y materiales nucleares en el territorio de un Estado determinado incumbe exclusivamente al Gobierno de dicho Estado, el que esa obligacion se cumpla o no, y si se cumple, en que medida o hasta que punto, son cosas que no dejan indiferentes a los demas Estados. Por ello, la proteccion fisica se ha convertido en motivo de interes y cooperacion internacional. La necesidad de la cooperacion internacional se hace evidente en los casos en que la eficacia de la proteccion fisica en el territorio de un Estado depende de que otros Estados tomen tambien medidas apropiadas para evitar o hacer fracasar los actos hostiles dirigidos contra instalaciones y

Methodology to establish the profile that defines a meta-specification that applies to distribution substations - Mexico case based on norm IEC-61850; Metodologia para establecer el perfil que define una meta-especificacion que aplica a subestaciones de distribucion -caso Mexico- basada en la norma IEC-61850

Energy Technology Data Exchange (ETDEWEB)

Picazo Blanquel, Cuitlahuac; Chairez Campos Carlos; Garcia Hernandez, Joaquin; Godinez Enriquez, Hebert; Poujol Galvan, Francisco C.; Suarez Cerda, Dionisio A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Villalobos Ramos, Andres; LLamas Gonzalez, Rosa E. [Comision Federal de Electricidad (Mexico); Samitier Otero, Carlos [Global Networking Engineering (Spain)

2010-07-01

In this article is presented a case of study of automation of electrical substations of Comision Federal de Electricidad (CFE) of Mexico, in which the Norm IEC-61850 has been taken as reference. The case of study consists of defining a metaspecification for the protection, control, measurement and communication systems required by the substations of electrical distribution. For the development the obtained previous experience in the development of a bequeathed system SA, norm IEC61850 has been taken as reference, as well as the experiences documented in the Instituto de Investigaciones Electricas (IIE), the Comision Federal de Electricidad (CFE) and Global Networking Engineering (GNE), Spain. This way, the obtained result is the metaspecification, which establishes the application of the control, protective equipment and measurement under the interoperability concepts, as well as the automation functions of substations applied in the intelligent networks (REI's). The methodology put into practice includes the design of the system architecture (SAS), the operation philosophy, the topology of the communications network, the data modeling one with logical nodes that include data types and classes of common data (CDC), transference of information, and administration of the archives ICD, SSD, SCD, and CID. [Spanish] En este articulo se presenta un caso de estudio de automatizacion de subestaciones electricas de la Comision Federal de Electricidad (CFE) de Mexico, en el cual se ha tomado como referencia la norma IEC-61850. El caso de estudio consiste en definir una metaespecificacion para los sistemas proteccion, control, medicion y comunicaciones requeridos por las subestaciones de distribucion electrica. Para el desarrollo se ha tomado como referencia la experiencia previa obtenida en el desarrollo de un sistema SA legado, la norma IEC61850, asi como las experiencias documentadas en el Instituto de Investigaciones Electricas (IIE), la Comision Federal de

Protecciones solares y su implicancia en la demanda energética: caso edificio público en Concepción, Chile

Directory of Open Access Journals (Sweden)

Jazmín Jara Córdova

2013-06-01

Full Text Available Determinar las ganancias solares en el vano-ventana con protecciones solares y analizar el comportamiento térmico en un edificio es un tema relativamente nuevo en el ámbito chileno. No obstante, el inadecuado manejo del control solar, en algunos casos, genera problemas de sobrecalentamiento al interior de la edificación. Esta investigación busca establecer un procedimiento que permita evaluar cuatro tipos de protecciones solares y analizar sus implicancias energéticas en un edificio público, cuya infraestructura utilizada se justifica en el desconocimiento de nuevas exigencias que hará el Estado para este tipo de edificación. Para el caso de estudio se han determinado 37 escenarios con distintos factores solares modificados, definidos a través de cálculo manual, los cuales son evaluados bajo simulación dinámica (TAS. En primera instancia se analiza el comportamiento de dos recintos y posteriormente se obtienen los resultados en relación con la demanda energética del edificio. Las protecciones solares utilizadas (voladizos, retranqueo, lamas horizontales y verticales reducen la demanda de refrigeración de un 52 a 73% (aumentando la demanda de calefacción, sin embargo la demanda energética total (calefacción y refrigeración disminuye de un 24 a 31%.

Quality assurance applied to Radiological Protection Program of CPHR - Centro de Proteccion Y Higiene de las Radiaciones

International Nuclear Information System (INIS)

Marrero Garcia, M.; Jova Sed, L.; Domenech Nieves, H.; Hernandez Sainz, A.

2001-01-01

The quality assurance in establishment that use ionizing radiation sources, is according to international recommendations of radiation protection programs. This work intends to present the experience of the Centro de Proteccion y Higiene de las Radiaciones (CPHR), in the implementation of requirements of quality in their Radiological Protection Program

Sun, wind and electric generation; Sol, viento y generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1995-12-31

A description is made of the electric generation known as the photovoltaic-wind power hybrid systems at the generation station of X-Calak which is located in the zone known as Punta Herrero-X-Calak Corridor, in the Southern coast of the Quintana Roo State. This is a technology in development, in which the solar and the wind energy are combined, to offer an alternative of electric generation that can be economical, reliable and of low impact on the environment. Mention is made of the experiences gathered in this station as well as the results obtained [Espanol] Se describe la tecnologia de generacion electrica conocida como sistemas hibridos fotovoltaico-eolico en la planta generadora de X-Calak, la cual esta localizada en la zona conocida como el corredor Punta Herrero-X-Calak, en la costa sur del estado de Quintana Roo. Esta es una tecnologia en desarrollo, en donde se combina la energia solar y energia eolica, para ofrecer una alternativa de generacion electrica que pretende ser economica, confiable y de bajo impacto sobre el medio ambiente. Se mencionan las experiencias obtenidas en esta planta asi como los resultados obtenidos

Sun, wind and electric generation; Sol, viento y generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

A description is made of the electric generation known as the photovoltaic-wind power hybrid systems at the generation station of X-Calak which is located in the zone known as Punta Herrero-X-Calak Corridor, in the Southern coast of the Quintana Roo State. This is a technology in development, in which the solar and the wind energy are combined, to offer an alternative of electric generation that can be economical, reliable and of low impact on the environment. Mention is made of the experiences gathered in this station as well as the results obtained [Espanol] Se describe la tecnologia de generacion electrica conocida como sistemas hibridos fotovoltaico-eolico en la planta generadora de X-Calak, la cual esta localizada en la zona conocida como el corredor Punta Herrero-X-Calak, en la costa sur del estado de Quintana Roo. Esta es una tecnologia en desarrollo, en donde se combina la energia solar y energia eolica, para ofrecer una alternativa de generacion electrica que pretende ser economica, confiable y de bajo impacto sobre el medio ambiente. Se mencionan las experiencias obtenidas en esta planta asi como los resultados obtenidos

Proceedings of the Fourth Session of Radioprotection of the patient; Actas de la 4. Jornada de Proteccion Radiologica al Paciente

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

The Radiology Argentine Society and the Radioprotection Argentine Society have organized the 4. Session of the Protection to the Patient, in order to inform to the technical and scientific community about the scopes of the radioprotection to the patient. The principal treated topics were the following: effects of the radiation in radiodiagnostic; radioprotection of the fetus and the pregnancy woman; radioprotection in dental radiology; radiological protection in TAC; radiation doses in radiodiagnostic; treatment of radiation injuries; fatal accidents in radiotherapy. [Spanish] La Sociedad Argentina de Radiologia, y la Sociedad Argentina de Radioproteccion, han organizado la 4ta. Jornada de Proteccion al Paciente, con el objeto de informar a la comunidad cientifico y tecnica sobre los alcances de la radioproteccion al paciente. Los principales temas tratados fueron los siguientes: efectos de la radiacion en radiodiagnostico; radioproteccion del feto y la mujer gestante; radioproteccion en radiologia odontologica; proteccion radioogica en TAC; dosis de radiacion en radiodiagnostico; tratamiento de lesiones por radiacion; accidentes fatales en radioterapia.

Relation between the cathodic protection and the diagnosis of DCVG; Relacion entre la proteccion catodica y el diagnostico de DCVG

Energy Technology Data Exchange (ETDEWEB)

Gonzalez N, Miguel A; Malo Tamayo, Jose Maria [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Chavarria M, Rosalba; Duran E, Pablo [Petroleos Mexicanos (Mexico)

2007-07-01

The concern of the corrosion in buried pipes has increased with the course of time, the aging of the mechanical protection of the piping, results in defects in the coating, exposing the metal to the corrosive ground, in which the piping is lodged. If suitable levels of cathodic protection do not exist, the corrosion phenomenon in these defects is presented originating unexpected faults in the piping, increasing the costs of maintenance and repair, as well as the diminution in the safety during the operation, as much for the workers as for the communities near the installation of ducts. The technique of Direct Current Voltage Gradient (DCVG), besides locating the defects of the coating in a buried pipe (which are corrosion potential sites), determines corrosion status of the defects and its severity as far as the consumption of protection current that each of these absorbs. Nevertheless, all this information acquires a greater relevance, when it is correlated with the operating conditions of the cathodic protection systems, to be able to emit recommendations that lead to the mitigation or eradication of the corrosion problems, together with a good operation of the protection systems. [Spanish] La preocupacion por la corrosion en tuberias enterradas ha ido en aumento con el transcurso del tiempo, debido al envejecimiento de la proteccion mecanica de las tuberias, el cual da como resultado defectos en el recubrimiento, dejando expuesto el metal en suelo corrosivo, en el que se encuentra alojada la tuberia. Si no existen niveles de proteccion catodica adecuados, se propicia el fenomeno de corrosion en estos defectos, originando fallas inesperadas en las tuberias, incrementando a su vez los costos de mantenimiento y reparacion, asi como la disminucion en la seguridad durante la operacion, tanto para los trabajadores como para las comunidades cercanas a las instalaciones de ductos. La tecnica de Gradiente de Voltaje de Corriente Continua (DCVG), ademas de localizar los

Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

Energy Technology Data Exchange (ETDEWEB)

Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

Anaerobic/aerobic treatment for the waste water from the Instituto de Investigaciones Electricas installations; Tratamiento anaerobio-aerobio de las aguas residuales de las instalaciones del IIE

Energy Technology Data Exchange (ETDEWEB)

Arvizu Fernandez, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The waste water treatment plant of the Instituto de Investigaciones Electricas (IIE) is analyzed. This plant originally was a plant of the activated sludge type (aerobic development), process that consumes large amounts of energy and that produces residual sludge 5 or 6 times greater than the anaerobic processes. The methodology and the techniques utilized were base in the analysis of the existing plant introducing an anaerobic treatment and performing laboratory experimentation. The plant design parameters considered are described. The results show the benefits of treating by anaerobic means the waste waters since depuration are obtained on the order of 75%, as well as the reduction of resulting residual sludge and in energy consumption. A reduction of 60% to 70% can be attained if a combination of anaerobic and aerobic processes is utilized [Espanol] Se analiza la planta de tratamiento de aguas residuales del Instituto de Investigaciones Electricas (IIE). Esta planta era originalmente una planta de lodos activados (desarrollo aerobio), proceso que consume mucha energia y genera lodos residuales de 5 a 6 veces mas que los procesos anaerobios. La metodologia y las tecnicas utilizadas se basaron en el analisis de la planta de tratamiento existente en el IIE; en la caracterizacion residual del IIE; en la modificacion de la planta de tratamiento introduciendo un tratamiento anaerobio y efectuando experimentacion en laboratorio. Se describen los parametros de diseno de la planta considerados. Los resultados muestran los beneficios de tratar por medios anaerobios las aguas residuales ya que se obtienen depuraciones del orden del 75%, asi como la reduccion de lodos residuales resultantes y el consumo de energia, pueden reducirse de un 60% a un 70% si se utiliza la combinacion de los procesos anaerobios y aerobios

Seismic damage in the electrical substations of the Colima state; Dano sismico en las subestaciones electricas del estado de Colima

Energy Technology Data Exchange (ETDEWEB)

Mena H, Ulises; Lopez L, Alberto; Guerrero F, Vicente A. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2004-07-01

On the 21 of January of 2003, at 20:06:36 hrs (Mexico center time) an earthquake occurred at the Pacific coast with a magnitude of 7.6 degrees in the Richter scale, whose epicenter was located near the state of Colima and it was felt in a large extent of the Mexican Republic. The earthquake caused numerous material damages in the structures (houses, churches, offices, etc) and vital lines, mainly in the infrastructure of the electrical sector of the region, leaving without electrical energy a large part of the nearby populations and some colonies of distant zones such as in Mexico City. The cause of the interruption of the electrical energy was due to the collapse of some of the equipment of 400 and 230 KV of the electrical transmission substations, among which are Manzanillo II and Colima II. With the experience acquired in the earthquake of October 9, 1995 in Manzanillo, in which also the facilities and equipment of the electrical substations were affected considerably, and as a part of the infrastructure project on the analysis of seismic risk of vital lines that is being developed at this moment at the Instituto de Investigaciones Electricas (IIE), it was decided to inspect the electrical substations of the zone, where the greater damages in the facilities and equipment were reported, to analyze and to determine the main causes of their failure. [Spanish] El 21 de enero de 2003, a las 20:06:36 hrs (hora del centro de Mexico) ocurrio un sismo en la costa del Pacifico con una magnitud de 7.6 grados en escala Richter, cuyo epicentro se localizo cerca del estado de Colima y se percibio en gran parte de la republica mexicana. El sismo causo cuantiosos danos materiales en las estructuras (viviendas, iglesias, oficinas, etc) y lineas vitales, principalmente en la infraestructura del sector electrico de la region, dejando sin energia electrica a gran parte de las poblaciones cercanas y algunas colonias de zonas lejanas como es la ciudad de Mexico. La causa del corte de

Management and control of the electrical energy demand; Administracion y control de la demanda de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Johnson Controls [Comision Federal de Electricidad (Mexico)

2005-07-01

Administrative measures allow a reduction in the energy consumption, but not always in the electrical demand. Control measures allow a reduction in the billing of the electrical demand, but not always in the energy consumption. This is why it is explained in this document what management and control of the electrical demand is, as well as its control strategies, the control alternatives, the billing demand and at the same time graphical representations along with three practical cases on the management of demand in air compressors, air conditioning equipment and in corporative buildings are presented. [Spanish] La aplicacion de las medidas administrativas permite reducir el consumo de energia, pero no siempre la demanda electrica. La aplicacion de medidas de control permiten reducir la demanda electrica facturable, pero no siempre el consumo de energia. Es por eso que en este documento se explica que es la administracion y el control de la demanda electrica, sus estrategias de control, las alternativas de control, la demanda facturable, representaciones graficas y tres casos practicos sobre la administracion de demanda en compresores de aire, la administracion de demanda en aire acondicionado y la administracion de demanda en un edificio corporativo.

Electric grid in Spain: a private network of optical fiber with national coverage; Red electrica de Espana: una red privada de fibra optica con cobertura nacional

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, A.

1995-12-31

Red Electrica constructed a grid with optical fiber in 1989 for the grids of 400-220 Kv. In 1995 the length of the grid will be of 6.600 Km. This grid supplies the telecommunication advanced services and contributes in the efficiency and quality of different tasks of Red Electrica.

Wind energy for electricity generation; Generacion electrica con energia del viento

Energy Technology Data Exchange (ETDEWEB)

Huacuz Villamar, Jorge M; Borja Diaz, Marco Antonio R. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-09-01

A description is made of electricity generation utilizing wind energy (Eoloelectric Generation). The case of Mexico is reviewed in respect to this technology, mentioning a small power plant of 1.5 Megawatts installed by the Comision Federal de Electricidad in the zone of La Ventosa in the State of Oaxaca. Mention is made of the possible causes why Mexico has not advanced in this type of power plants for power generation as in other countries like Germany, Spain and India. The advance in these countries is shown as well as the growth statistics of the wind power in the world. It is concluded that there is not in Mexico a strategy for wind energy utilization for electricity generation in spite of the potential benefits this technology offers [Espanol] Se describe el caso de la generacion electrica utilizando la energia del viento (Generacion Eoloelectrica). Se aborda el caso de Mexico respecto a esta tecnologia, mencionando una pequena central de 1.5 Megawatts (MW) instalada por la Comision Federal de Electricidad (CFE) en la zona de la Ventosa, Oaxaca. Se mencionan las posibles causas por las que en Mexico este tipo de centrales de generacion de energia no ha avanzado como en otros paises, por ejemplo: Alemania, Espana y la India. Se muestran los avances de estos paises, asi como una estadistica del crecimiento de la generacion eoloelectrica en el mundo. Se concluye en que no existe en Mexico una estrategia para la generacion eoloelectrica a pesar de los beneficios potenciales que ofrece esta tecnologia

Methodology for electrical studies in industrial networks including the study of electric arc; Metodologia para los estudios electricos en redes industriales incluyendo el estudio de arco electrico

Energy Technology Data Exchange (ETDEWEB)

Rasgado Casique, Jose Pepe; Silva Farias, Jose Luis [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: jrasgado@iie.org.mx; jlsilva@iie.org.mx

2010-11-15

This article presents a methodology for conducting electrical studies in industrial networks. The methodology included the study of arc flash as a very important area of current basic electrical studies, such as power flow, short circuit and coordination. The aim of this study is to determine the Personal Protective Equipment (PPE) and flash protection boundary for personnel working with or near energized equipment, based on the IEEE Std 1584-2004 and NFPA-70E- 2004. Also included are criteria and recommendations to reduce incident energy level (cal/cm{sup 2}). At work we used a distribution network for industrial type test. The studies were carried out using a commercial program for the analysis of electrical networks. [Spanish] En este articulo se presenta una metodologia para llevar a cabo los estudios electricos en redes industriales. En la metodologia se incluye al estudio de arco electrico como un area muy importante de los estudios electricos basicos actuales, como: flujos de potencia, cortocircuito y coordinacion de protecciones. El objetivo de dicho estudio es determinar el Equipo de Proteccion Personal (EPP) apropiado y los limites de proteccion para el personal que opera con o cerca de equipo energizado, con base en las normas IEEE Std. 1584-2004 y la NFPA-70E-2004. Ademas, se incluyen criterios y recomendaciones para disminuir el nivel de energia incidente (cal/cm{sup 2}). En el trabajo se utilizo una red de distribucion tipo industrial de prueba. Los estudios se llevaron a cabo utilizando un programa comercial para el analisis de redes electricas.

Qualitative aspects in the projects that are developed in the Instituto de Investigaciones Electricas; Aspectos cualitativos en los proyectos que se desarrollan en el Instituto de Investigaciones Electricas

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The globalization of markets has generated more options of purchase of all type of goods and services, these options have generated opportunities and threats for all the companies and have looked for the satisfaction of the client as a strategy to remain or incursion into the global market. The Instituto de Investigaciones Electricas (IIE) is not the exception and therefore it looks for the identification of the qualitative aspects and to systematize its application in the projects that executes by means of the implantation of a system of quality assurance based on the series of ISO 9000 Standards. Some examples are described to identify the qualitative aspects of the projects that are developed in the Institute. [Spanish] La globalizacion de los mercados ha generado mas opciones de compra de todo tipo de bienes y servicios, dichas opciones han generado oportunidades y amenazas para todas las empresas y se ha buscado satisfacer al cliente como estrategia para permanecer o incursionar en el mercado global. El Instituto de Investigaciones Electricas (IIE) no es la excepcion y por lo tanto busca identificar los aspectos cualitativos y sistematizar su aplicacion en los proyectos que realiza mediante la implantacion de un sistema de aseguramiento de la calidad basado en la serie de normas ISO 9000. Se describen algunos ejemplos para identificar los aspectos cualitativos de los proyectos que se desarrollan en el instituto.

Co-generation project for the Combined Cycle Power Plant President Juarez Rosarito and a reverse osmosis desalting plant; Proyecto de cogeneracion para la planta de ciclo combinado Presidente Juarez Rosarito y una planta desaladora de osmosis inversa

Energy Technology Data Exchange (ETDEWEB)

Beltran Mora, Hector; Espindola Hernandez, Salvador [Universidad NAcional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

In this work a technical and economical analysis of the installation of a reverse osmosis desalting plant connected to a power station that uses the combined cycle technology under a co-generation scheme is presented: production of electricity and water. The operation program of the desalting power station will be determined by the demand of energy of the combined cycle power station; the proposal is that the desalting plant operates in the hours of low load of the power station and shuts down at the peak hours of electrical energy demand. So that this study is representative, the demand curves of electric energy of the units of combined cycle of Central President Juarez Rosarito of the Comision Federal de Electricidad (CFE) have been taken and updated the data of the reverse osmosis desalting plants that are available at the moment in the market. As basis of the study the level costs will be determined so much as the electrical energy generated by the power station of combined cycle, operating inside and outside of a co-generation scheme and the costs made level for the water produced by the reverse osmosis plant under two assumptions: the first one is buying the electrical energy from CFE and the second one considering that the CFE is the owner of the desalting plant and therefore the cost of electrical energy to desalting the plant is zero. This work shows the economic impacts on the costs of the generation of electrical energy and on those of the desalted water in a co-generation scheme. The results shown in this study can be considered for the future planning in the construction of desalting plants to supply of water in the Northwestern zones of the country where serious problems of water shortage exist. [Spanish] En este trabajo se presenta un analisis tecnico y economico de la instalacion de una planta desaladora de osmosis inversa acoplada a una central de generacion de energia electrica que utiliza la tecnologia de ciclo combinado bajo un esquema de

Calculation of electromagnetic fields in electric machines by means of the finite element. Computational aspects; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Aspectos computacionales

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario; De la Torre, Octavio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1990-12-31

In this article are described the computational characteristics of the Package CALIIE 2D of the Instituto de Investigaciones Electricas (IIE), for the calculation of bi-dimensional electromagnetic fields. The computational implementation of the package is based in the electromagnetic and numerical statements formerly published in this series. [Espanol] En este articulo se describen las caracteristicas computacionales del paquete CALIIE 2D del Instituto de Investigaciones Electricas (IIE), para calcular campos electromagneticos bidimensionales. La implantacion computacional del paquete se basa en los planteamientos electromagneticos y numericos antes publicados en esta serie.

Calculation of electromagnetic fields in electric machines by means of the finite element. Computational aspects; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Aspectos computacionales

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario; De la Torre, Octavio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1989-12-31

In this article are described the computational characteristics of the Package CALIIE 2D of the Instituto de Investigaciones Electricas (IIE), for the calculation of bi-dimensional electromagnetic fields. The computational implementation of the package is based in the electromagnetic and numerical statements formerly published in this series. [Espanol] En este articulo se describen las caracteristicas computacionales del paquete CALIIE 2D del Instituto de Investigaciones Electricas (IIE), para calcular campos electromagneticos bidimensionales. La implantacion computacional del paquete se basa en los planteamientos electromagneticos y numericos antes publicados en esta serie.

Design and implementation of the 40, 50/51 protections and MEL, OEL and V/HZ limiters in a synchronous generator; Diseno e implementacion de las protecciones 40,50/51 y limitadores MEL, OEL y V/HZ en un generador sincrono

Energy Technology Data Exchange (ETDEWEB)

Goitia Ochoa, Salvador Hector

2001-10-15

The thesis shows the design and implementation of loss of field (40) and overcurrent (50/51) relays, minimum excitation limiter (MEL), over excitation limiter (OEL) and Voltage / Frequency limiter (V/Hz). It is also shown the development of a synchronous machine mathematical model for representing the conditions of open circuit, three phase short-circuit at stator terminals and short/open circuit at the field winding. Finally, a study about the magnetic saturation effect on the protection against loss of excitation is shown. It is studied the effects on the relay settings by using the X{sub d} saturated reactance. All the tests were applied for a salient-pole synchronous machine of 7 kVA, 220 V and 1800 rpm. The machine is at the Propulsion Laboratory of the Instituto Tecnologico de La Laguna. [Spanish] En este trabajo de tesis se realiza el diseno e implementacion de las protecciones contra la perdida de campo (40) y de sobrecorriente (50/51), asi como el de los limitadores de minima excitacion (MEL), maxima excitacion (OEL) y el limitador de Voltaje / Frecuencia (V/Hz). Ademas se muestra el desarrollo de las ecuaciones del modelo matematico del generador sincrono en condiciones de circuito abierto, con una falla trifasica en terminales, con el devanado de campo en corto circuito y en circuito abierto. Por ultimo se realiza un estudio en el cual se incluye el efecto de la saturacion magnetica en la proteccion contra la perdida de campo y las consecuencias que traeria el ajustar la proteccion usando el parametro de X{sub d} saturada. Las pruebas fisicas de las protecciones y limitadores fueron aplicadas a un generador sincrono de polos salientes con una capacidad de 7 kVA, 220 V, 1800 rpm, localizado en el Laboratorio de Propulsion de Instituto Tecnologico de la laguna.

The electric energy and the environment in Mexico. Volume 3; Energia electrica y medio ambiente en Mexico. Volumen 3

Energy Technology Data Exchange (ETDEWEB)

Quintanilla Martinez, Juan [eds.] [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

1997-12-31

This document is the third one of three volumes of the 1. Seminar on the Current Conditions and Perspectives of the Electric Sector in Mexico, organized by the Programa Universitario de Energia and the Instituto de Investigaciones Economicas (University Program of Energy and the Institute of Economic Research), both of them agencies of the Universidad Autonoma de Mexico (UNAM). The titles of the three volumes are the following: Volume 1.- The opening of the Mexican Electric Sector to foreign investment. Volume 2.- Concrete innovation and technological learning experiences at the Luz y Fuerza del Centro enterprise. Volume 3.- The Electric Energy and the Environment in Mexico. This third volume covers the following subjects: Hydroelectricity, land use and water managing; the electric generation in Mexico and its environmental impact, the nuclear electricity and the handling of radioactive materials; the exposure to electromagnetic fields and its association with children`s leukemia; the energy in Mexico and the sustainable development; potential of electricity generation in large scale with wind power in Mexico; towards a scheme of distributed electric power generation with non-conventional energies and renewable energy sources in Mexico in the 21Century. These documents were elaborated by specialists of the electric sector, from the sector itself as well as from private and public academic entities [Espanol] Este documento constituye el tercero de tres volumenes del Primer Seminario sobre Situacion y Perspectivas del Sector Electrico en Mexico, organizado por el Programa Universitario de Energia y el Instituto de Investigaciones Economicas, ambas dependencias de la Universidad Nacional Autonoma de Mexico (UNAM). Los titulos de los tres volumenes son los siguientes: volumen 1: La apertura externa del sector electrico mexicano, volumen 2: Experiencias concretas de innovacion y aprendizaje tecnologico en la empresa Luz y Fuerza del Centro, volumen 3: Energia electrica

Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1994-12-31

This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

Standardization for electric energy saving; Normalizacion para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Reyes Diaz, Arturo [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1993-12-31

This work describes shortly the current legislation on the standardization; as well as the participation of the entities Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) and Programa de Ahorro de Energia (PAESE) in the consulting committees, for the elaboration of the Mexican official standards focussed to electric power saving. [Espanol] El presente trabajo, describe brevemente la legislacion actual sobre la normalizacion; asi como la participacion de las entidades Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE) y Programa de ahorro de Energia (PAESE) en los comites consultivos, para la elaboracion de normas oficiales mexicanas enfocadas al ahorro de energia electrica.

The electric tariff in the residential sector; Tarificacion electrica en el sector residencial

Energy Technology Data Exchange (ETDEWEB)

Sheinbaum Pardo, Claudia [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

The main objective of this paper is to make an historical revision and analyze the current condition of the electric tariffs in the Mexican residential sector and ask ourselves if the equalization of tariffs generates the possibility that the entire population has access to the electricity service. The document is divided into three parts. The first one presents the history and the tendencies of the tariffs in the domestic sector in Mexico since 1973 until 1996 and the current tariff structure. The second one describes the characteristics of the residential users and mention is made of how the increment of the electric tariffs would affect the various population sectors. The last part of this paper presents some tariff criteria, that take into account energy conservation measures [Espanol] El objetivo principal de este trabajo es hacer una revision historica y analizar la situacion actual de las tarifas electricas en el sector residencial mexicano y preguntarnos si la igualdad de tarifas genera la posibilidad de que toda la poblacion tenga acceso al servicio electrico. El documento se divide en tres partes. La primera presenta la historia y tendencias de las tarifas del sector domestico en Mexico desde 1973 hasta 1996 y la estructura tarifaria actual. La segunda describe las caracteristicas de los usuarios residenciales y se menciona como afectaria el incremento de las tarifas electricas a los distintos sectores de la poblacion. La ultima parte de este trabajo presenta algunos criterios de tarificacion, que toman en cuenta medidas de ahorro de energia

Work Report 1994-1995 Instituto de Investigaciones Electricas (Electrical Research Institute)

International Nuclear Information System (INIS)

Instituto de Investigaciones Electricas.

1995-01-01

The Instituto de Investigaciones Electricas (Electrical Research Institute) collaborates with the Comision Federal de Electricidad (Electricity Federal Commission) and with the public and private entities of the electric sector in the solution of scientific and technological problems. The activity of the Institute follows the lineaments of the Secretaria de Energia (Energy Secretariat) and is inside the frame of the programs of national modernization. This two-year report presents in seven sections the activities of the Institute; the sections are: 1. Importance of the IIE in the economic context of the Governmental sector. 2. Orientations of sectorial structural policy and main operation results. 3. Structural change, 1994-1995. 4. Research and Development, advances and results. 5. Budget and financial situation. 6. Statistical Annex. 7. Glossary

RETOS A LAS PROTECCIONES ELÉCTRICAS EN LAS REDES DE DISTRIBUCIÓN CON GENERACIÓN DISTRIBUIDA CHALLENGES OF DISTRIBUTED GENERATION ON THE ELECTRIC PROTECTION IN DISTRIBUTION NETWORKS

Directory of Open Access Journals (Sweden)

Marta Bravo de las Casas

2009-04-01

Full Text Available Las redes de distribución han sido diseñadas para que la potencia fluya en una sola dirección. La introducción de la Generación Distribuida (GD hace que esta consideración ya no sea válida. Esto traerá nuevos retos para la operación y el diseño de la red. Una de las áreas críticas más afectadas que existe es la de las protecciones eléctricas. En este trabajo se hace el estudio de cómo se afectan los ajustes de las protecciones eléctricas al trabajar con generación distribuida en una red de distribución. Para ello se simuló una red con la ayuda del software denominado PSX. Se conectó generación en distintos lugares, de diferentes capacidades y tipos. Se calcularon los niveles de cortocircuitos en los distintos escenarios para los cuales fueron ajustadas las protecciones. Se obtuvieron un conjunto de resultados interesantes, los cuales pueden conducir a nuevas estrategias en lo que respecta a estos equipos.The distribution networks have been designed so that the power flows in a single direction. When the Distributed Generation is introduced this consideration is no longer valid. Distributed Generation will bring new challenges for the operation and the design of the network. One of the most critical areas affected is the electric protection. This paper discusses issues of how the adjustments of the electric protection are affected when the Distributed Generation is introduced in a distribution network. For this purpose, the network was simulated with the help of the software named PSX. The generation was connected in different places, with different capacities and types. The levels of short circuits were calculated in the different scenarios in which the protections were adjusted. A set of interesting results was obtained, which can lead to new strategies in what concerns to these protections.

3D As-Built a documentation of the substation electrical power 400 KV; Documentacion 3D As-Built de una subestacion electrica de 400 KV

Energy Technology Data Exchange (ETDEWEB)

Sarti Fernandez, F.

2011-07-01

It's getting parameters of time, yields and products obtained, in order to have an objective reference to the possible application of this technique to substations of Red Electrica Espanola (REE).

COORDINACIÓN DE LAS PROTECCIONES DE LA SUBESTACIÓN DE DISTRIBUCIÓN EN EL SISTEMA MILAGRO GUAYAS – LOS RÍOS

OpenAIRE

Quiroga Aguirre, Boris Adrian; Muñoz Cabello, Carlos Luis

2015-01-01

El presente trabajo desarrolla el estudio de la coordinación de protecciones aplicados a la subestación de distribución “MILAGRO SUR”, ubicada en el cantón Milagro. Partiendo primero desde la descripción de las instalaciones para conocer los elementos que la componen; posteriormente, se realiza un estudio de flujo de carga en condiciones de máxima y mínima carga y un estudio de cortocircuito de la subestación aplicados a la barra de 69kV y 13.8kV, esto nos servirá como datos preliminares para...

Development of a prototype of a Master Central Unit (MCU) for the automation of Distribution Control Centers; Desarrollo de un prototipo de Unidad Central Maestra (UCM) para la automatizacion de Centros de Control de Distribucion

Energy Technology Data Exchange (ETDEWEB)

Uribe Blanco, Carlos Eduardo; Mata Almanza, Rafael; Picasso Blanquel, Cuitlahuac [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2011-07-01

For the purpose of contributing to the strategic plan and to the improvement of productivity and competitiveness levels, the Federal Electric Commission (CFE, Spanish acronym) is making a significant investment in human resources and materials to modernize electric energy supply systems, including monitoring, protection and automatic control for operating all the elements of the electrical process, from generating plants to transmission lines, distribution systems and commercial applications. With this modernization, the CFE is also creating the infrastructure for the interoperability and interconnectivity of the above systems, in such a way to enable it to broaden, continue and complement the functional integration of the linked institutional systems of the latest generation. The total integration of the systems will allow the CFE to move toward Intelligent Electric Networks. Therefore, the CFE requested help from the Electric Research Institute (IIE, Spanish acronym) to develop part of the infrastructure to modernize the automation of distribution. This consists of the development of a prototype of the supervision and control system, using interoperable open technology owned by the CFE which enables using the functions of a SCADA system (Supervisory Control And Data Acquisition) to supervise and control electric distribution networks. [Spanish] Con el proposito de contribuir al plan estrategico y mejoramiento de los niveles de productividad y competitividad, la Comision Federal de Electricidad (CFE) esta invirtiendo fuertemente en recursos humanos y materiales para la modernizacion de los sistemas de suministro de energia electrica, incluyendo el monitoreo, proteccion y control automatico para la operacion de todos los elementos del proceso electrico, desde los centros de generacion hasta las lineas de transmision, los sistemas de distribucion y las aplicaciones de comercializacion. Con dicha modernizacion, la CFE tambien esta generando la infraestructura para la

Methodology for the location diagnosis of electrical faults in electric power systems; Metodologia para el diagnostico de ubicacion de fallas en sistema electricos de potencia

Energy Technology Data Exchange (ETDEWEB)

Rosas Molina, Ricardo

2008-08-15

tareas mas afectada por esta situacion es la operacion de los sistemas electricos frente a la presencia de fallas, donde la primera labor a realizar por parte del personal de operacion de la red es la pronta ubicacion del lugar de falla dentro del sistema. En el presente trabajo se aborda el problema del diagnostico de ubicacion de fallas electricas en sistemas de potencia, desde la perspectiva de los operadores de los centros de control de energia de una empresa electrica. El objetivo de este trabajo de tesis es describir una metodologia de analisis de operacion de protecciones como base para el desarrollo de un sistema de diagnostico de ubicacion de fallas, que permita estimar los posibles lugares de falla dentro del sistema asi como una justificacion de la operacion de las protecciones ante un disturbio como apoyo a los operadores de los Centros de Control de Energia. La metodologia esta disenada para utilizar distintos tipos de informacion, discreta, continua y controles. Sin embargo, en el desarrollo de la presente etapa de la metodologia propuesta se hace uso exclusivamente de la informacion de tipo discreta de los estados de interruptores y operacion de relevadores, asi como de la conectividad de los elementos de la red. La metodologia de analisis consiste en determinar el grupo de elementos donde pudo haber ocurrido la falla, utilizando las zonas de cobertura de las protecciones asociadas a los interruptores operados. Posteriormente, estas alternativas de falla se ordenan en forma descendentes de posibilidad utilizando indices de clasificacion y analisis basados en logica difusa.

Interconnection of industrial centers with the electric network of the public service; Interconexion de centros industriales con la red electrica del servicio publico

Energy Technology Data Exchange (ETDEWEB)

Rosales Sedano, Inocente; Lopez Velazquez, Juan Jose; Garcia Paredes, Job; Robles Pimentel, Edgar [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Garcia Alvarez, David; Guzman Camacho, Benigno [Petroleos Mexicanos (Mexico)

2000-07-01

The large industrial centers that have continuous production processes and consume high amounts of electrical energy, generally have their own power generation. The petrochemical complexes, the paper and steel factories and the sugar mills are examples of this type of centers. On the other hand, the new regulation for the generation of electrical energy that allows to the electrical energy interchange between private companies and the public network, has originated the necessity of connecting systems that formerly operated isolated. Since the original design of the isolated electrical systems was to operate in an independent form, making the interconnection can generate technical problems that must be analyzed and solved. In this paper, some experiences related with the behavior of electrical equipment when connected to operate with the public network, are presented. [Spanish] Los grandes centros industriales que tienen procesos de produccion continua y consumen altas cantidades de energia electrica, generalmente cuentan con generacion propia. Los complejos petroquimicos, las fabricas de papel y acero y los ingenios azucareros son ejemplos de este tipo de centros. Por otro lado, la nueva reglamentacion de generacion de energia electrica que permite el intercambio de energia electrica entre las companias privadas y la red publica, ha originado la necesidad de conectar sistemas que antes operaban aislados. Debido a que el diseno original de los sistemas electricos aislados fue trabajar en forma independiente, el realizar la interconexion puede generar problemas tecnicos que tienen que analizarse y resolverse. En este articulo, se presentan algunas experiencias relacionadas con el comportamiento del equipo electrico al operar conectado con la red publica.

Methodology for evaluating the grounding system in electrical substations; Metodologia para la evaluacion del sistema de puesta a tierra en subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Torrelles Rivas, L.F [Universidad Nacional Experimental Politecnica: Antonio Jose de Sucre (UNEXPO), Guayana, Bolivar (Venezuela)]. E-mail: torrellesluis@gmail.com; Alvarez, P. [Petroleos de Venezuela S.A (PDVSA), Maturin, Monagas (Venezuela)]. E-mail: alvarezph@pdvsa.com

2013-03-15

The present work proposes a methodology for evaluating grounding systems in electrical substations from medium and high voltage, in order to diagnose the state of the elements of the grounding system and the corresponding electrical variables. The assessment methodology developed includes a visual inspection phase to the elements of the substation. Then, by performing measurements and data analysis, the electrical continuity between the components of the substation and the mesh ground is verified, the soil resistivity and resistance of the mesh. Also included in the methodology the calculation of the step and touch voltage of the substation, based on the criteria of the International IEEE standards. We study the case of the 115 kV Pirital Substation belonging to PDVSA Oriente Transmission Network. [Spanish] En el presente trabajo se plantea una metodologia para la evaluacion de sistemas de puesta a tierra en subestaciones electricas de media y alta tension, con la finalidad de diagnosticar el estado de los elementos que conforman dicho sistema y las variables electricas correspondientes. La metodologia de evaluacion desarrollada incluye una fase de inspeccion visual de los elementos que conforman la subestacion. Luego, mediante la ejecucion de mediciones y analisis de datos, se verifica la continuidad electrica entre los componentes de la subestacion y la malla de puesta a tierra, la resistividad del suelo y resistencia de la malla. Se incluye tambien en la metodologia el calculo de las tensiones de paso y de toque de la subestacion, segun lo fundamentado en los criterios de los estandares Internacionales IEEE. Se estudia el caso de la Subestacion Pirital 115 kV perteneciente a la Red de Transmision de PDVSA Oriente.

Analysis methodology for economic technical feasibility studies in offshore electrical generation systems; Metodologia de analisis para estudios de factibilidad tecnica economica en sistemas de generacion electrica costa fuera

Energy Technology Data Exchange (ETDEWEB)

Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

An analysis methodology followed in the development of technique-economic feasibility studies of systems of electrical generation in offshore electrical installations is presented, including the obtaining of the curves of the turbine and generator performance, the technical considerations for the formulation of the operation scenes and the calculations of the economic evaluation of a real scenario. [Spanish] Se muestra una metodologia de analisis seguida en el desarrollo de estudios de factibilidad tecnica-economica de sistemas de generacion electrica en instalaciones electricas costa fuera, incluyendo la obtencion de las curvas de comportamiento de la turbina y el generador, las consideraciones tecnicas para la formulacion de los escenarios de operacion y los calculos de la evaluacion economica de un escenario real.

Energy efficiency and restructuring of the Brazilian power sector

Energy Technology Data Exchange (ETDEWEB)

De Martino Jannuzzi, Gilberto [State University of Campinas, Sao Paulo, (Brazil)

1999-07-01

Since the early nineties Brazil has initiated a program of reforms in its electric sector which includes utility privatization, de-verticalization. The main objectives were to promote a market-oriented energy industry attractive to private investments. This has led to the loss of sponsorship for the public-interest programs formerly undertaken by the state utilities. In particular, of significant concern are the programs for promotion of energy efficiency, renewable energy technologies, rural electrification and environmental protection. In the midst of the privatization effort, the National Agency for Electrical Energy ANEEL was created (end of 1997). One of the tasks of the regulatory agency is to provide funds and incentives to energy conservation. In this paper we review the role of ANEEL in promoting energy efficiency investments in the context of a market-oriented sector, its limitations and prospects. [Spanish] Desde principios de los anos noventa Brasil ha iniciado un programa de reformas en su sector electrico que incluye la privatizacion del servicio electrico y la desverticalizacion. Los objetivos principales eran promover una industria de la energia orientada comercialmente de la energia electrica, atractiva a las inversiones privadas. Esto ha conducido a la perdida de patrocinio de los programas de interes publico emprendidos antes por las empresas electricas del estado. En particular, de preocupacion significativa estan los programas para la promocion del rendimiento energetico, de las tecnologias de la energia renovable, de la Electrificacion rural y de la proteccion del medio ambiente. En medio del esfuerzo de la privatizacion, la agencia nacional para la energia electrica ANEEL fue creada (finales de 1997). Una de las tareas de la agencia reguladora es proporcionar fondos e incentivos a la conservacion de energia. En este trabajo repasamos el papel de ANEEL en promover inversiones del rendimiento energetico en el contexto de un sector orientado

System for the design of electrical distribution substations; Sistema para el diseno de subestaciones electricas de distribucion

Energy Technology Data Exchange (ETDEWEB)

Zayas Perez, Benjamin Eddie; Islas Perez, Eduardo; Bahena Rada, Jessica Liliana; Romero Lima, Jesus [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Sierra Rodriguez, Benjamin; Moreno Diaz, Humberto [Comision Federal de Electricidad (Mexico)

2011-07-01

The physical design of electric substations involves a variety of activities, such as developing, reviewing and performing modifications to different design proposals, estimating costs and producing documents to be integrated into an executive project. These activities are usually conducted at the Distribution Divisions of the Federal Electric Commission (CFE) through two separate processes: the development of engineering plans with computer-aided design software (CAD) and volumetric calculations for the initial budget using conventional spreadsheets. The documents are manually developed on an individual basis, without the existence of any functions to allow for automatically updating the design modifications of any of the plans. The corresponding initial budget becomes a lengthy and laborious process with the likelihood of inconsistencies among the documents. In order to optimize the design process for the public and electromechanical works of electric substations (ES) in a three-dimensional (3D) graphic environment, the IIE's Management of Process Supervision, in coordination with the CFE Distribution Subdivision, developed the System for the Design of Electric Substation Distribution (SDESD). This system makes use of the advantages of CAD3D technology to develop detail engineering, cost engineering to calculate initial budgets and virtual reality for three-dimensional interactive navigation. It is worth mentioning that this system is currently in the implementation phase at the CFE Distribution Subdivision. This article briefly describes the main stages in the development of the project, as well as the functioning and principal components of the system. [Spanish] El diseno fisico de subestaciones electricas implica una variedad de actividades, tales como elaborar, revisar y efectuar modificaciones de diferentes propuestas de diseno, estimar costos y producir documentos, para integrarlos como parte de un proyecto ejecutivo. Estas actividades usualmente se

Coordinación de las protecciones de la subestación de distribución en la península de Santa Elena

OpenAIRE

Fernández Chicas, Robinson David; Espinel Encalada, José Leonidas; Aguilar Sánchez, Yasmani Leonardo; Saavedra Mera, Juan

2014-01-01

El presente trabajo desarrolla el estudio de la coordinación de protecciones aplicados a la subestación de distribución “SALINAS”, ubicada en la península de Santa Elena. Partiendo primero desde la descripción de las instalaciones, para conocer los elementos que la componen; posteriormente, se realiza un estudio de flujo de carga en condiciones de máxima y mínima carga y un estudio de cortocircuito de la subestación aplicados a la barra de 69kV y 13.8kV, esto nos servirá como datos preliminar...

Efficient use of electric power in corporative 3M Mexico; Uso eficiente de la energia electrica en el corporativo 3M Mexico

Energy Technology Data Exchange (ETDEWEB)

Sanchez Perez, Alfredo; Quinones Bonilla, Antonio S. [3M Mexico, S.A. de C.V. (Mexico); Bustos Antunez, Jorge I; Reyes Arce, Manuel [Hines Interests, S.A. de C.V. (Mexico)

2003-07-01

It is not enough to count on with the state of the art technology for the daily operation of a building, the challenge is to be able to make a clear analysis and with attainable goals for the optimization of rational use of the electrical energy in the operation of intelligent buildings without affecting the comfort and productivity for users as well as the functionality and profitability for the owner. This went our base to carry out control strategies that helped the efficient use of the electrical energy, obtaining important savings without neglecting the operative part, of services and human within the property. It is thus, that 3M Mexico wanting to reach these purposes, conducted actions to improve the efficiency of the equipment in the following items: electric network, general lighting, air conditioning system, ventilation and extraction, hydropneumatic system, and sumps operation. [Spanish] No basta contar con la tecnologia de punta para la operacion diaria de un edificio, el reto es ser capaces de realizar un analisis claro y con metas alcanzables para la optimizacion de uso racional de la energia electrica en las operaciones de edificios inteligentes sin afectar el confort y productividad para usuarios asi como la funcionalidad y rentabilidad para el propietario. Esta fue nuestra base para llevar a cabo estrategias de control que ayudaron al uso eficiente de la energia electrica, obteniendo ahorros importantes sin descuidar la parte operativa, de servicios y humana dentro de la propiedad. Es asi, que 3M Mexico queriendo alcanzar dichos propositos, realizo acciones para mejorar la eficiencia de los equipos en los siguientes rubros: red electrica, iluminacion general, sistema de aire acondicionado, ventilacion y extraccion, sistema hidroneumatico, y operacion de carcamos.

Coordinación de las protecciones de la subestación de distribución en el sistema Durán norte

OpenAIRE

Tinoco Tinoco, Misael Patricio; Sanchez Yela, Darwin Horacio

2016-01-01

El presente trabajo desarrolla el estudio de la coordinación de protecciones aplicados a la subestación de distribución “DURÁN NORTE”, ubicada en el cantón Durán en la parte norte de la cuidad del mismo nombre. Partiendo primero desde la descripción de las instalaciones, para conocer los elementos que la componen; posteriormente, se realiza un estudio de flujo de carga en condiciones de máxima y mínima carga y un estudio de cortocircuito de la subestación aplicados a la barra de 69kV y 13.8kV...

Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Rincon Nader, Jorge A [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

Introduction criteria and concepts on energy saving in the technical standards for electric installations; Introduccion de criterios y conceptos de ahorro de energia en las normas tecnicas para instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Rincon Nader, Jorge A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

The project Introduction Criteria and Concepts on Energy Saving in the Technical Standards for electric installations, is described, whose immediate objective is to recommend and in some cases regulate the use of energy saving equipment and devices and the adoption of attitudes and procedures that convey into saving, and the rational and efficient use of the electric energy. [Espanol] Se describe el proyecto Introduccion de Criterios y Conceptos de Ahorro de Energia en las Normas Tecnicas para instalaciones electricas, que tiene como objetivo inmediato recomendar, y en algunos casos reglamentar el uso de equipos y dispositivos ahorradores y la adopcion de actitudes y procedimientos que conduzcan a un ahorro y uso racional y eficiente de la energia electrica.

Implementation of the procedure of high radiation of the forum about radiological protection in the health care environment; Implantacion del procedimiento de alta radiologica del foro sobre proteccion radiologica en el medio sanitario

Energy Technology Data Exchange (ETDEWEB)

Castro Novais, J.; Pardo Perez, E.; Molina Lopez, M. Y.; Ruiz Maqueda, S.; Maldonado Suarez, A.

2013-07-01

The objective of this work is to present the results of the implementation in our hospital the procedure of high radiological in patients treated with 131 I described in the document presented by the Forum on Radiation Protection in the Health Environment formed by the Consejo de Seguridad Nuclear and the Spanish societies of Fisica Medica and Proteccion Radiologica. (Author)

Electric power saving potential due to domestic refrigerators replacement; Potencial de ahorro de energia electrica por el reemplazo de refrigeradores domesticos

Energy Technology Data Exchange (ETDEWEB)

Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de Energia Electrica (Mexico)]. E-mail: jose.peralta@cfe.gob.mx

2006-04-15

In Mexico the second most used electrical appliance is: refrigerator. Owing to its use, it would be a promising option for electric power saving. In Guadalajara, Reynosa and Tampico it was performed a study with the aim of launching a project to replace the old refrigerators with new ones which are more effective and less expensive. Since the refrigerators cost and the electrical invoicing saving, the electric appliance change is profitable. To expect with this replacement more than eight million of refrigerators manufactured before 1997 will be changed. [Spanish] El refrigerador es el segundo electrodomestico mas utilizado a nivel nacional, esto permite que debido a su uso sea una opcion prometedora para el ahorro de energia electrica. Se hizo un estudio en Guadalajara, Reynosa y Tampico con el fin de lanzar un proyecto para sustituir los refrigeradores viejos por unos nuevos que sean mas eficaces y menos costosos. Por el costo de los refrigeradores y el ahorro en la facturacion electrica, el cambio de electrodomestico es rentable, de esta manera se espera que los mas de ocho millones de refrigeradores fabricados antes de 1997 que existen en el pais sean cambiados.

Estimated saving potential and efficient use of energy in air conditioning by means of the solar protection; Potencial estimado de ahorro y uso eficiente de energia en aires acondicionados mediante la proteccion solar

Energy Technology Data Exchange (ETDEWEB)

Mejia D, David; Morillon G, David; Rodriguez V, Luis [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-07-01

In here it is presented the analysis of the impact of the solar gains through the transparent parts of a prototype house of social interest, located in a dry warm climate. This analysis was made to determine the gains through windows for the summer time and under the following conditions: without outside solar protections, with the use of eaves, solar breakers and finally with the use of both systems of solar protection. The results were compared to obtain the considered potential of energy saving in cooling equipment, that could be obtained in future houses to build. [Spanish] Se presenta el analisis del impacto de las ganancias solares a traves de las partes transparentes de un prototipo de vivienda de interes social, ubicado en un clima calido seco. Dicho analisis se realizo para determinar las ganancias a traves de ventanas para la epoca de verano y bajo las siguientes condiciones: sin protecciones solares exteriores, con el empleo de aleros, con quiebrasoles y finalmente con el empleo de ambos sistemas de proteccion solar. Se compararon los resultados para obtener el potencial estimado de ahorro de energia en equipo de enfriamiento, que se tendria en las futuras viviendas por construir.

Calculation of electromagnetic field in electric machines through the finite element: Electromagnetic modeling; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito: Modelacion electromagnetica

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

In this article are presented the general characteristics of the electromagnetic phenomena that can be described by means of the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) derived from a modeling based in the magnetic and electric potentials, always using the MKS rationalized units system. Closed regions are considered with axial or moving symmetry to incorporate the bi-dimensional behavior of the electromagnetic fields. The possibility of means with movement is also included. [Espanol] En este articulo se presentan las caracteristicas generales de los fenomenos electromagneticos que pueden describirse mediante el programa de computo CALIIE-2D, del Instituto de Investigaciones Electricas (IIE), que provienen de una modelacion basada en los potenciales magnetico y electrico, en esta se utiliza sistema MKS racionalizado de unidades. Se consideran regiones cerradas con simetria axial o traslacional para incorporar el comportamiento bidimensional de los campos electromagneticos, se incluye tambien la posibilidad de medios con movimiento.

Calculation of electromagnetic field in electric machines through the finite element: Electromagnetic modeling; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito: Modelacion electromagnetica

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In this article are presented the general characteristics of the electromagnetic phenomena that can be described by means of the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) derived from a modeling based in the magnetic and electric potentials, always using the MKS rationalized units system. Closed regions are considered with axial or moving symmetry to incorporate the bi-dimensional behavior of the electromagnetic fields. The possibility of means with movement is also included. [Espanol] En este articulo se presentan las caracteristicas generales de los fenomenos electromagneticos que pueden describirse mediante el programa de computo CALIIE-2D, del Instituto de Investigaciones Electricas (IIE), que provienen de una modelacion basada en los potenciales magnetico y electrico, en esta se utiliza sistema MKS racionalizado de unidades. Se consideran regiones cerradas con simetria axial o traslacional para incorporar el comportamiento bidimensional de los campos electromagneticos, se incluye tambien la posibilidad de medios con movimiento.

Experimental evaluation of the consumption of electrical energy of domestic refrigerators in Mexico; Evaluacion experimental del consumo de energia electrica de refrigeradores domesticos en Mexico

Energy Technology Data Exchange (ETDEWEB)

Arroyo Cabanas, Fernando Gabriel [Programa de Energia, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico); Ambriz Garcia, Juan Jose; Paredes Rubio, Hernando Romero [Area de Ingenieria en Recursos Energeticos, Universidad Autonoma Metropolitana, Mexico, D.F. (Mexico)

2004-06-15

In this work the experimental methodology developed to carry out tests of the electrical energy of refrigerators consumption as norm NOM-015-ENER-2002 is described. The tests were made in the Laboratory of Controlled Environment of the Iztapalapa Unit of the Universidad Autonoma Metropolitana to a sample of old domestic refrigerators in operation. The results found show that the consumption of electrical energy of refrigerators of more than 10 years of age can be higher than 60% of what a modern refrigerator of high efficiency would consume, or 30% higher if the refrigerator was made between 1997 and 2002. With these results it is sustained, in a more complete way, the evaluation of the saving potential of the national electrical energy by the substitution of old domestic refrigerators by modern, as reported in a previous work. [Spanish] En este trabajo se describe la metodologia experimental desarrollada para efectuar pruebas del consumo de energia electrica a refrigeradores conforme la norma NOM-015-ENER-2002. Las pruebas se realizaron en el Laboratorio de Ambiente Controlado de la Unidad Iztapalapa de la Universidad Autonoma Metropolitana a una muestra de refrigeradores domesticos antiguos en operacion. Los resultados encontrados muestran que el consumo de energia electrica de refrigeradores de mas de 10 anos de antig�edad puede superior al 60% de lo que consumiria un refrigerador moderno de alta eficiencia, o superior en un 30% si el refrigerador fue fabricado entre 1997 y 2002. Con estos resultados se sustenta de manera mas completa la evaluacion del potencial de ahorro de energia electrica nacional por substitucion de refrigeradores domesticos antiguos por modernos reportado en un trabajo anterior.

Demand curves of electric energy in domestic sector in two regions of Mexico; Curvas de demanda de energia electrica en sector domestico de dos regiones de Mexico

Energy Technology Data Exchange (ETDEWEB)

Maqueda Zamora, Martin Roberto; Sanchez Viveros, Luis Agustin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2011-07-01

In this work, is presented the analysis of residential consumption, regarding the temperature of two areas and types of electrical appliances. A shape characteristic of the load of the electrical energy is obtained for two geographical areas in Mexico. The consumption information was obtained from measurements in residential consumers and from the Mexican Utility. It is also shown the demand profile of the main residential appliances, obtained from smart metering equipment to separate the residential users' load profiles. It is shown the effect of the different variables analyzed on the electrical power consumption, mainly the type of equipment, the geographical localization, the weather (temperature, humidity and vegetation type). With the results attained, the definition of effective energy-saving programs and its effectiveness can be obtained. [Spanish] En este trabajo se presenta el analisis del consumo residencial considerando la temperatura de las dos areas y tipos de aparatos electricos. Se obtiene una forma caracteristica de la carga de energia electrica de dos areas geograficas de Mexico. La informacion sobre el consumo se obtuvo de mediciones en consumidores residenciales y de una empresa electrica mexicana. Tambien se muestra el perfil de demanda de los principales aparatos residenciales, derivado de equipos de medicion inteligentes para separar los perfiles de carga de usuarios residenciales. Se muestra el efecto de diferentes variables analizadas en el consumo de energia electrica, principalmente el tipo de equipo, la localizacion geografica, el clima (temperatura, humedad y tipo de vegetacion). Con los resultados alcanzados pueden definirse programas de ahorro de energia efectivos y lograr implantarlos.

Supervisory control for hybrid systems of electrical generation based on fuzzy logic; Control supervisorio para sistemas hibridos de generacion electrica basado en logica difusa

Energy Technology Data Exchange (ETDEWEB)

Lagunas M, Javier; Ortega S, Cesar [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Caratozzolo M, Patricia [Instituto Tecnologico de Estudios Superiores de Monterrey, campus Cd. de Mexico (Mexico)

2005-07-01

The development and integration of hybrid systems of electrical generation (SHGE) of small capacity: The intention of these developments is its implementation in isolated or far away communities from conventional electric networks, that contribute in the own productive processes of these towns. As part of these work a system of control for their hybrid system wind-photovoltaic- internal combustion machine was developed that operates nowadays in a system installed in Pachuca, Hidalgo, Mexico. However, in the two past years, the GENC has worked, altogether with the Management of Control and Instrumentation of the Instituto de Investigaciones Electricas (IIE) and the Centro Nacional de Investigacion y Desarrollo Tecnologico (CENIDET) (National Center of Research and Technological Development), to incorporate an intelligent control technique in the regulation of the hybrid systems of wind-photovoltaic-machine of internal combustion type. Lemos de Pereira rises that the main problems of the present technology of the SHGE are related to the control and supervision of the power systems. The system that is in charge of the actions of load control and dispatch is denominated supervisory control. This controller supervises the operation of all the components, regulates the entry or exiting of operation of the generation systems, as well as the loads. [Spanish] El desarrollo e integracion de sistemas hibridos de generacion electrica (SHGE) de pequena capacidad. El proposito de estos desarrollos es su implementacion en comunidades aisladas o alejadas de la red electrica convencional, las cuales contribuyan en los procesos productivos propios de estos poblados. Como parte de dichos trabajos se desarrollo un sistema de control para su sistema hibrido eolico-fotovoltaico-maquina de combustion interna que opera actualmente en un sistema instalado en Pachuca, Hidalgo, Mexico. Ahora bien, en los dos ultimos anos, la GENC ha trabajado, en conjunto con la Gerencia de Control e

Environmental management project of the Patache power plant project and associated transmission line; Gestion ambiental proyecto central termoelectrica Patache y linea de transmision asociada

Energy Technology Data Exchange (ETDEWEB)

Carreno Paredes, Cristian [Compania Electrica Tapaca (CELTA, S. A.), (Chile)

1997-12-31

This report makes a brief description of the services developed by INGENDESA of the projects executed in the area of engineering as well as in the area of environmental matters. In a second instance a relatively detailed presentation is made of the most important background of the Chilean project: {sup E}nvironmental Management of the Patache Power Plant and the Associated Transmission Line-Compania Electrica Tarapaca (CELTA, S.A.) Region I{sup .} The justification for the construction of the power plant and the environmental problems associated with the same are described [Espanol] En el presente informe se hace una breve presentacion de los servicios desarrollados por INGENDESA, de los proyectos elaborados tanto en el area de la ingenieria como en la tematica ambiental. En segunda instancia, se hace una presentacion relativamente detallada de los antecedentes mas importantes del proyecto chileno {sup G}estion Ambiental Central Patache y Linea de Transmision Asociada - Compania Electrica Tarapaca (CELTA, S.A.) I Region{sup .} Se describe la justificacion de la construccion de esta central termoelectrica y los problemas ambientales asociados a la misma

Environmental management project of the Patache power plant project and associated transmission line; Gestion ambiental proyecto central termoelectrica Patache y linea de transmision asociada

Energy Technology Data Exchange (ETDEWEB)

Carreno Paredes, Cristian [Compania Electrica Tapaca (CELTA, S. A.), (Chile)

1996-12-31

This report makes a brief description of the services developed by INGENDESA of the projects executed in the area of engineering as well as in the area of environmental matters. In a second instance a relatively detailed presentation is made of the most important background of the Chilean project: {sup E}nvironmental Management of the Patache Power Plant and the Associated Transmission Line-Compania Electrica Tarapaca (CELTA, S.A.) Region I{sup .} The justification for the construction of the power plant and the environmental problems associated with the same are described [Espanol] En el presente informe se hace una breve presentacion de los servicios desarrollados por INGENDESA, de los proyectos elaborados tanto en el area de la ingenieria como en la tematica ambiental. En segunda instancia, se hace una presentacion relativamente detallada de los antecedentes mas importantes del proyecto chileno {sup G}estion Ambiental Central Patache y Linea de Transmision Asociada - Compania Electrica Tarapaca (CELTA, S.A.) I Region{sup .} Se describe la justificacion de la construccion de esta central termoelectrica y los problemas ambientales asociados a la misma

Radiological protection in nuclear power plants; La proteccion radiologica en las centrales nucleares

Energy Technology Data Exchange (ETDEWEB)

Zorrilla R, S. [CFE. Central Laguna Verde, Km. 42.5 Carretera Cardel-Nautla, Veracruz (Mexico)

2008-12-15

This presentation sharing experiences which correspond to the nuclear power plant of Laguna Verde. This nuclear power plant is located at level 2 of four possible, in the classification performance of the World Association of Nuclear Operators (WANO), which means the mexican nuclear power plant is classified in terms of its performance indicators and above the average achieved by their counterparts americans and canadians. In the national context, the nuclear power plant of Laguna Verde has also been honored with several awards such as the National Quality Award, the Clean Industry Certificate, the distinction of Environmental Excellence and others of similar importance. For the standards of WANO, the basic idea is that there are shortcomings in one of nuclear power plant concern to all partners. The indicators used for the classification will always go beyond more compliance with regulations, which are assumed, and rather assume come or a path to excellence. Among the most important indicators are: the collective dose, the percentage of areas declared as contaminated, the number, type and tendency of contamination personal cases, the number of dosimetry alarms, the number of unplanned exposures, loss control of high radiation areas and the release of contaminated material outside the restricted areas. Furthermore, as already indicated, nuclear power plants are of special care situations, such as, carrying out work in areas with radiation fields of more than 15 mSv h{sup -1}, the movement of spent fuel in the reload floor. The consideration of the minimum total effective dose equivalent as a criterion for prescribing tools that reduce exposures, but may increase the external cases of contaminated casualties, the experience in portals such as workers subject to radiology, where exposure in industrial radiography, and so on. Special mention deserve the conditions generated during fuel reload stops, which causes a massive personnel movement, working simultaneously on

Estudios de coordinación de las protecciones eléctricas por métodos computarizados aplicados a la central térmica enrique garcía

OpenAIRE

Yepez Perez, Juan Eduardo; Vasquez Lemus, José Dennys; Saavedra Mera, Juan

2013-01-01

Este proyecto está enfocado al estudio de los Equipos de Protección que se encuentran presente en el sistema de potencia de la Central Térmica Enrique García. Para ello, fue necesario realizar estudios de Flujo de Carga y Cortocircuito; con estos análisis determinaremos factores importantes a considerar al momento de realizar los ajustes de los relés de protecciones, ya que se debe conocer contra que anomalía, falla o disturbio se está protegiendo el equipo de Generación y Transformación de n...

Electrochemical generation of energy: from the portable electronic devices to industrial plants; Generacion electroquimica de energia electrica: de los dispositivos electronicos portatiles a las plantas industriales

Energy Technology Data Exchange (ETDEWEB)

Rodriguez Varela, Javier [Centro de Investigacion y de Estudios Avanzados (CINVESTAV), Unidad Saltillo (Mexico)

2006-10-15

This article proposes the electrical energy generation via electrochemistry as substitute of petroleum and discusses on the development of low and high temperature fuel cells fed by diverse types of fuels: electrolyte fuel cells of polymeric membrane, PEM cells H{sub 2}/O{sub 2}, cell of direct alcohol consumption, PEM cells and bio-fuel cells, SOFC cells and bio-fuel cells. It presents its constitution, operation principles, and use plausibility, present situation in the market, advantages and disadvantages, as well as already made cell insertion projects. [Spanish] Este trabajo propone la generacion de energia electrica via electroquimica como sustituto del petroleo y discurre sobre el desarrollo de celdas de combustible de baja y alta temperatura alimentadas por diversos tipos de combustibles: celdas de combustible de electrolito de membrana polimerica, celda PEM H{sub 2}/O{sub 2}, celda de consumo directo de alcohol, celdas PEM y biocombustibles, celdas de combustible de oxido solido y biocombustibles. Expone su constitucion, principios de operacion, plausibilidad de uso, situacion actual en el mercado, ventajas y desventajas, asi como proyectos de insercion de celdas ya realizados.

Saving 50% of energy in air conditioning and refrigeration; 50% de ahorro de energia en aire acondicionado y refrigeracion

Energy Technology Data Exchange (ETDEWEB)

Sanchez De la Fuente, Rodolfo Javier [Instituto para la Proteccion Ambiental de Nuevo Leon-CAINTRA, Nuevo Leon (Mexico); Bolado Tamez, Jaime Antonio [Industrias AlEn S. A. de C. V., Monterrey (Mexico)

1998-12-31

Due to the fact that the air conditioning systems represent up to 70% of the energy consumption in our buildings, to the constant raise of the electric tariffs and to the increment of temperatures in Nuevo Leon State, as well as the restrictions on the use of some refrigerant fluids because of its potential damage to the ozone layer (Montreal Protocol) and the preferential use of refrigerants with low global heating potential (Kioto Protocol). The Camara de la Industria de la Transformacion de Nuevo Leon (Nuevo Leon`s Transformation Industry Chamber) through the Instituto para la Proteccion Ambiental de Nuevo Leon (Nuevo Leon`s Institute for Environmental Protection), create the program ECO-REFRIGERATION whose three missions are: Increase the efficiency of air conditioning and refrigeration equipment, promote the substitution of refrigerants and extend the benefits of these projects to the community in general. [Espanol] Debido a que los sistemas de climatizacion representan hasta el 70% de consumo energetico en nuestros inmuebles, al constante incremento de las tarifas electricas, el incremento de las temperaturas en Nuevo Leon, asi como la restriccion del uso de algunos refrigerantes por su potencial de dano de la capa de ozono (Protocolo de Montreal) y el uso preferente de refrigerantes con bajo potencial de calentamiento global (Protocolo de Kioto), la Camara de la Industria de la Transformacion de Nuevo Leon a traves del Instituto para la Proteccion Ambiental de Nuevo Leon crean el Programa ECO-REFRIGERACION cuyas tres misiones son: Incrementar la eficiencia de los equipos de aire acondicionado y refrigeracion, promover la sustitucion de refrigerantes y extender los beneficios de este proyecto a la comunidad en general.

Saving 50% of energy in air conditioning and refrigeration; 50% de ahorro de energia en aire acondicionado y refrigeracion

Energy Technology Data Exchange (ETDEWEB)

Sanchez De la Fuente, Rodolfo Javier [Instituto para la Proteccion Ambiental de Nuevo Leon-CAINTRA, Nuevo Leon (Mexico); Bolado Tamez, Jaime Antonio [Industrias AlEn S. A. de C. V., Monterrey (Mexico)

1999-12-31

Due to the fact that the air conditioning systems represent up to 70% of the energy consumption in our buildings, to the constant raise of the electric tariffs and to the increment of temperatures in Nuevo Leon State, as well as the restrictions on the use of some refrigerant fluids because of its potential damage to the ozone layer (Montreal Protocol) and the preferential use of refrigerants with low global heating potential (Kioto Protocol). The Camara de la Industria de la Transformacion de Nuevo Leon (Nuevo Leon`s Transformation Industry Chamber) through the Instituto para la Proteccion Ambiental de Nuevo Leon (Nuevo Leon`s Institute for Environmental Protection), create the program ECO-REFRIGERATION whose three missions are: Increase the efficiency of air conditioning and refrigeration equipment, promote the substitution of refrigerants and extend the benefits of these projects to the community in general. [Espanol] Debido a que los sistemas de climatizacion representan hasta el 70% de consumo energetico en nuestros inmuebles, al constante incremento de las tarifas electricas, el incremento de las temperaturas en Nuevo Leon, asi como la restriccion del uso de algunos refrigerantes por su potencial de dano de la capa de ozono (Protocolo de Montreal) y el uso preferente de refrigerantes con bajo potencial de calentamiento global (Protocolo de Kioto), la Camara de la Industria de la Transformacion de Nuevo Leon a traves del Instituto para la Proteccion Ambiental de Nuevo Leon crean el Programa ECO-REFRIGERACION cuyas tres misiones son: Incrementar la eficiencia de los equipos de aire acondicionado y refrigeracion, promover la sustitucion de refrigerantes y extender los beneficios de este proyecto a la comunidad en general.

Strategies to optimize the electric energy use in non-residential buildings; Estrategias para eficientizar el uso de la energia electrica en edificios no residenciales

Energy Technology Data Exchange (ETDEWEB)

Castro Flores, J.; Morillon Galvez, D. [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

1995-12-31

This paper presents the problems identified in non-residential buildings, where the inadequate use of energy is mainly shown in three points: inadequate technology and maintenance, wrong use and wrong habits in the energy use. The consequences of this situation in the ecological, politic and social environment were analyzed. In base of the problems detected the following strategies are proposed: An adequate project and design, retrofit, maintenance and users awareness for the rational energy use. The economic evaluation performed for the implementation of these strategies shows a significant saving potential of the electric power, with measures of null and low investment. [Espanol] Se presenta la problematica identificada en edificios no residenciales; donde el uso inadecuado de la energia electrica se manifiesta principalmente en tres puntos: tecnologia y mantenimiento inadecuados, y mal uso y costumbres de la energia. Se analizo las consecuencias de esta situacion en el ambito ecologico, economico, politico y social. Con base a la problematica se proponen las siguientes estrategias: un adecuado proyecto y diseno, retrofit, mantenimiento y concientizacion del usuario para el uso racional de la energia. La evaluacion economica realizada para implantar estas estrategias muestra un significativo potencial de ahorro de energia electrica, con medidas de nula y baja inversion.

Strategies to optimize the electric energy use in non-residential buildings; Estrategias para eficientizar el uso de la energia electrica en edificios no residenciales

Energy Technology Data Exchange (ETDEWEB)

Castro Flores, J; Morillon Galvez, D [Comision Nacional para el Ahorro de Energia, Mexico, D. F. (Mexico)

1996-12-31

This paper presents the problems identified in non-residential buildings, where the inadequate use of energy is mainly shown in three points: inadequate technology and maintenance, wrong use and wrong habits in the energy use. The consequences of this situation in the ecological, politic and social environment were analyzed. In base of the problems detected the following strategies are proposed: An adequate project and design, retrofit, maintenance and users awareness for the rational energy use. The economic evaluation performed for the implementation of these strategies shows a significant saving potential of the electric power, with measures of null and low investment. [Espanol] Se presenta la problematica identificada en edificios no residenciales; donde el uso inadecuado de la energia electrica se manifiesta principalmente en tres puntos: tecnologia y mantenimiento inadecuados, y mal uso y costumbres de la energia. Se analizo las consecuencias de esta situacion en el ambito ecologico, economico, politico y social. Con base a la problematica se proponen las siguientes estrategias: un adecuado proyecto y diseno, retrofit, mantenimiento y concientizacion del usuario para el uso racional de la energia. La evaluacion economica realizada para implantar estas estrategias muestra un significativo potencial de ahorro de energia electrica, con medidas de nula y baja inversion.

The electric energy in Mexico and the sustainable development; La energia electrica en Mexico y el desarrollo sustentable

Energy Technology Data Exchange (ETDEWEB)

Campos Aragon, Leticia [Instituto de Investigaciones Economicas, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

This document explains the importance of the sustainable development in the electric energy, that is, that the technological advances in the electric sector do no hamper the future of the generations to come and generate potential problems such as: environmental pollution, unnecessary expenses in the realization of new technologies already executed. Mention is made of the relationship between nature and society, the ecological crisis, and the electric energy, seven points are given on how to control and treat waste waters, three points are given to handle and dispose of solid wastes, finally four points are given on the noise contamination control. It is concluded that the problem of reducing the environmental impact of the generation of electricity does not depend on the applied technology, since there are technological options for its solution, but on other more complex factors that deal with the generation of wealth, its distribution and the population growing [Espanol] En el presente documento se explica la importancia del desarrollo sustentable en la energia electrica, es decir que los avances tecnologicos en el sector energetico no entorpezcan el futuro de las generaciones venideras y generen posibles problemas como: contaminacion del medio ambiente, gastos innecesarios en la realizacion de las nuevas tecnologias realizadas. Se menciona la relacion entre la naturaleza y la sociedad, la crisis ecologica y la energia electrica, se dan siete puntos de como controlar y tratar aguas residuales, se proporcionan tres puntos para manejar y disponer de residuos solidos, por ultimo se dan cuatro puntos sobre el control de la contaminacion por ruido. Se concluye en que el problema de reducir el impacto ambiental por la generacion de electricidad no depende de la tecnologia empleada pues existen alternativas tecnologicas para su solucion, sino en otros aun mas complejos que tienen que ver con la generacion de la riqueza, su distribucion y el crecimiento de la poblacion

Analysis of the models of the metal oxide lightning; Analisis de los modelos de apartarrayos de oxidos metalicos

Energy Technology Data Exchange (ETDEWEB)

Del Angel Hernandez, Alberto

1999-12-01

criterio para juzgar la confiabilidad de un sistema electrico de potencia, es la frecuencia y duracion de la interrupcion del suministro de energia electrica a los consumidores. Debido a la importancia de mantener la continuidad del servicio de energia electrica, es necesario estudiar los dispositivos de proteccion contra sobretensiones, ya que en condiciones meteorologicas adversas, asi como por condiciones de cambio de configuracion en la red, se pueden presentar sobretensiones que danen a los equipos del sistema electrico de potencia. Los apartarrayos son dispositivos cuya funcion es proteger equipos de un sistema electrico de potencia contra las sobretensiones, por medio de absorcion de energia a traves del sistema de aterrizamiento. En la proteccion de los Sistemas Electricos de Potencia (SEP) contra sobretensiones comunmente se empleaban los apartarrayos de carburo de silicio (SiC) que brindaban un margen de proteccion pequeno. En los ultimos anos se han desarrollado nuevas tecnologias que han revolucionado la coordinacion del aislamiento. Un ejemplo de estas tecnologias es la aplicacion de los apartarrayos de oxidos metalicos (ZnO), los cuales incrementan el margen de proteccion considerablemente. En este trabajo se evaluan las limitaciones y potencialidades reales de los modelos existentes, y el propuesto en este trabajo, de apartarrayos de oxidos metalicos, con la ayuda de las simulaciones digitales en transitorios electromagneticos, cuando los apartarrayos estan sujetos a transitorios por maniobra de interruptores como por descargas atmosfericas. Todas las simulaciones en este trabajo se realizaron con el Programa de Transitorios Electromagneticos (EMTP), que es una herramienta ampliamente usada y recomendada para el analisis de los fenomenos transitorios electromagneticos. El modelado de los apartarrayos de oxidos metalicos en el EMTP es complicado por el comportamiento no lineal de sus elementos y se requiere de una gran precision y cuidado para implementar

Digital viscosity controller for fossil power plants; Controlador digital de viscosidad para plantas termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Bautista B, Amberto; Ocampo P, Carlos; Gutierrez A, Ruben; Madinaveitia V, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1990-12-31

Upon the need of increasing the efficiency of the existing fossil power plants in Mexico, the Instrumentation and Control Department of the Instituto de Investigaciones Electricas (IIE) designed and built a viscosity controller to enhance the fuel oil heating process. The system strategy, that allows the control either by temperature or viscosity considers, as an important element, the changing characteristics of the supplied fuels. The equipment that is utilized forms apart of the line Acquisition and Control System (ACS) developed at the same Institute, that has been successfully applied in other systems. [Espanol] Ante la necesidad de aumentar la eficiencia de las plantas termoelectricas existentes en Mexico, el Departamento de Instrumentacion y Control, del Instituto de Investigaciones Electricas (IIE), diseno y construyo un controlador de viscosidad para mejorar el proceso de calentamiento del aceite combustible. La estrategia del sistema, que permite controlar ya sea por viscosidad o por temperatura, considera como elemento importante las caracteristicas cambiantes de los combustibles suministrados. El equipo que se utiliza forma parte de la linea SAC (sistema de adquisicion y control), desarrollada en el mismo Instituto, que se ha aplicado satisfactoriamente en otros sistemas.

Digital viscosity controller for fossil power plants; Controlador digital de viscosidad para plantas termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Bautista B, Amberto; Ocampo P, Carlos; Gutierrez A, Ruben; Madinaveitia V, Miguel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1989-12-31

Upon the need of increasing the efficiency of the existing fossil power plants in Mexico, the Instrumentation and Control Department of the Instituto de Investigaciones Electricas (IIE) designed and built a viscosity controller to enhance the fuel oil heating process. The system strategy, that allows the control either by temperature or viscosity considers, as an important element, the changing characteristics of the supplied fuels. The equipment that is utilized forms apart of the line Acquisition and Control System (ACS) developed at the same Institute, that has been successfully applied in other systems. [Espanol] Ante la necesidad de aumentar la eficiencia de las plantas termoelectricas existentes en Mexico, el Departamento de Instrumentacion y Control, del Instituto de Investigaciones Electricas (IIE), diseno y construyo un controlador de viscosidad para mejorar el proceso de calentamiento del aceite combustible. La estrategia del sistema, que permite controlar ya sea por viscosidad o por temperatura, considera como elemento importante las caracteristicas cambiantes de los combustibles suministrados. El equipo que se utiliza forma parte de la linea SAC (sistema de adquisicion y control), desarrollada en el mismo Instituto, que se ha aplicado satisfactoriamente en otros sistemas.

The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

Energy Technology Data Exchange (ETDEWEB)

Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

1998-12-31

This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

The optimization of electric motors repair techniques as a mean for electric energy saving; La optimizacion de las tecnicas de reparacion de motores electricos como un medio para ahorrar energia electrica

Energy Technology Data Exchange (ETDEWEB)

Zagal Leon, Juan Ruben [Fideicomiso para el Ahorro de Energia Electrica (FIDE), Mexico, D. F. (Mexico)

1999-12-31

This paper presents, in a very concise, which are the techniques to optimize the electric motors repair made by the Fideicomiso para el Ahorro de Energia Electrica (FIDE), the loss of efficiency that might exist after repairing an electric motor, as well as the procedures to perform an optimum reparation of the electric motors. Furthermore, some recommendations are given for the selection of an adequate rewinding shop to guarantee that the motor does not suffer efficiency losses after its repair. [Espanol] Este trabajo presenta, de manera muy concreta, cuales son las tecnicas para optimizar las tecnicas de reparacion de motores electricos realizado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE), el nivel de perdida de eficiencia que puede existir despues de reparar un motor electrico, asi como los procedimientos para realizar una optima reparacion en motores electricos. Asimismo, se proporcionan algunas recomendaciones para seleccionar un taller de reembobinado adecuado para garantizar que el motor no sufra perdidas de eficiencia despues de su reparacion.

Evaluation of the problematic of corrosion in bottoms of tanks of crude oil storage; Evaluacion de la problematica de corrosion en fondos de tanques de almacenamiento de petroleo crudo

Energy Technology Data Exchange (ETDEWEB)

Malo T, Jose M; Uruchurtu C, Jorge; Meza, Beatriz [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Lopez C, Luis F [Region Marina Suroeste, Pemex (Mexico)

2003-07-01

In this article the results related to the corrosive aggressiveness of the water fluids of crude oil of the Marine Terminal of Dos Bocas (TMDB), on the effectiveness of the anticorrosive control methods and on the control measures that could be adopted are presented. Also, this article comprises a work made by personnel of the Instituto de Investigaciones Electricas (IIE) during year 2002. The corrosion in tanks is of electrochemical nature and has its origin in the watery phase that accompanies the crude oil on being extracted from underground. In the case of the storage tanks, the watery phase separates at the bottom, causing the wetness of the bottom steel plates and its degradation. Due to the limited access to the interior of the tank during its operation, a testing device was designed that was connected to a drain valve of a tank of the terminal. The experimental work looked for the evaluation of the aggressiveness of the fluids, the type of corrosion products formed and the effectiveness of the cathodic protection and of the coatings. Additionally, fluid samples were collected, for analyzing the natural aggressiveness level that presents the water contained in the three types of crude: Mayan, Olmeca and Istmo handled in the terminal, studying steel samples and of plant fluids under controlled laboratory conditions. The aggressiveness was obtained from measurements of corrosion rates and analysis of microbial activity. The feasibility of applying the method of cathodic protection was analyzed, observing its effectiveness, as well as particular corrosion forms as the ones that occur in the pontoons. The results of the study lead to propose a monitoring scheme to pursuit the integrity of the coatings, the operation of the cathodic protection and the corrosion in tanks, with which a better control of the operation of the anticorrosive methods and of the degradation that occurs with the corrosion, could be obtained. [Spanish] En este trabajo se presentan

Planning the expansion of electrical transmission networks with evolutionary programming; Planeacion de la expansion de redes de transmision electrica con programacion evolucionaria

Energy Technology Data Exchange (ETDEWEB)

Ceciliano Meza, Jose Luis

1997-12-31

In this work it is presented for the first time in the literature the solution of the problem of the planning the expansion of an electrical transmission network (PERTE) with the use of the Evolutionary Programming. The evolutionary programming is a stochastic method of optimization with similar characteristics to the generic algorithms, but different. During the development of this work it is shown what each one of these two heuristic methods of optimization consist of. Additionally, the main characteristics of other two heuristic methods known in the literature are described (Tabu Searching and Simulated Annealing). These two methods together with the genetic algorithms and decomposition of Benders have also been used to solve the problem of planning PERTE. The operation of the proposed algorithm of evolutionary programming was tested in two networks of electrical transmission. The first case of test is a system which is known in the literature. The second case is a representative system of the electrical transmission network of Central America. The results obtained improve all the results shown when applying different heuristic methods of optimization (genetic algorithms, simulated annealing and Tabu searching) to solve the same problem. [Espanol] En este trabajo se presenta por primera vez en la literatura, la solucion del problema de la planeacion de expansion de una red de transmision electrica (PERTE) con el uso de la Programacion Evolucionaria. La programacion evolucionaria es un metodo estocastico de optimizacion con caracteristicas similares a los algoritmos geneticos, pero diferente. Durante el desarrollo de este trabajo se muestra en que consiste cada uno de estos dos metodos heuristicos de optimizacion. Ademas, se describen las caracteristicas principales de otros dos metodos heuristicos conocidos en la literatura (busqueda Tabu y Recorrido Simulado). Estos dos metodos juntos con los algoritmos geneticos y descomposicion de Benders tambien han sido

Energy saving in buildings through the elimination of typical problems; Ahorro de energia electrica en edificios a traves de la eliminacion de problemas tipicos

Energy Technology Data Exchange (ETDEWEB)

Ramirez Rivero, Alex G [Genertek, S. A. de C. V., Mexico, D. F. (Mexico)

1994-12-31

The enormous electric energy consumption in buildings represents an important area of saving opportunities. The design of installations without advanced technical illumination criteria, the absence of standardization over energy efficiency, the lack of observation of the existing standards and guides, the continuous load growth in existing installations and the lack of appropriate maintenance, are some of the causes of the inefficient use of electric energy in buildings. Although the problems, and consequently the solutions, are exclusive for each unit, some of the former are frequently repeated. In this paper the problems found along more than 40 audits conducted in large buildings of different types in Mexico city are commented. [Espanol] El enorme consumo de energia electrica en edificios representa una importante area de oportunidad para ahorro. El diseno de instalaciones sin criterios luminotecnicos avanzados, la ausencia de normalizacion sobre eficiencia energetica, la falta de observancia de las normas y recomendaciones vigentes, el continuo crecimiento de carga en instalaciones existentes y la falta de mantenimiento adecuado son algunas de las causas del uso ineficiente de la energia electrica en inmuebles. Aunque los problemas y por tanto las soluciones son particulares para cada unidad, algunos de los primeros se repiten frecuentemente. En este trabajo se comentan los problemas encontrados a lo largo de mas de 40 auditorias realizadas a inmuebles grandes de diversos tipos en la ciudad de Mexico.

Energy saving in buildings through the elimination of typical problems; Ahorro de energia electrica en edificios a traves de la eliminacion de problemas tipicos

Energy Technology Data Exchange (ETDEWEB)

Ramirez Rivero, Alex G. [Genertek, S. A. de C. V., Mexico, D. F. (Mexico)

1993-12-31

The enormous electric energy consumption in buildings represents an important area of saving opportunities. The design of installations without advanced technical illumination criteria, the absence of standardization over energy efficiency, the lack of observation of the existing standards and guides, the continuous load growth in existing installations and the lack of appropriate maintenance, are some of the causes of the inefficient use of electric energy in buildings. Although the problems, and consequently the solutions, are exclusive for each unit, some of the former are frequently repeated. In this paper the problems found along more than 40 audits conducted in large buildings of different types in Mexico city are commented. [Espanol] El enorme consumo de energia electrica en edificios representa una importante area de oportunidad para ahorro. El diseno de instalaciones sin criterios luminotecnicos avanzados, la ausencia de normalizacion sobre eficiencia energetica, la falta de observancia de las normas y recomendaciones vigentes, el continuo crecimiento de carga en instalaciones existentes y la falta de mantenimiento adecuado son algunas de las causas del uso ineficiente de la energia electrica en inmuebles. Aunque los problemas y por tanto las soluciones son particulares para cada unidad, algunos de los primeros se repiten frecuentemente. En este trabajo se comentan los problemas encontrados a lo largo de mas de 40 auditorias realizadas a inmuebles grandes de diversos tipos en la ciudad de Mexico.

Power quality. Analysis of the losses related to the tension and current distortion in the electric network; Calidad de la energia electrica. Analisis de las perdidas relacionadas con la distorsion de la tension y corriente de la red electrica

Energy Technology Data Exchange (ETDEWEB)

Rauch Sitar, Vladimir [Universidad Autonoma de Queretaro, Facultad de Ingenieria, Queretaro (Mexico)

1994-12-31

In recent times every day one speaks more about power quality and about the losses produced by the tension and current distortion. The distortion in the electric network and the consumption tend to keep on increasing, and each day there will be the need of applying more resources to handle it inside a reasonable range. In this article the situation of the power quality is analyzed in the most general case and also simplified for special cases. On base on the distortion coefficients of tension and current a matrix is created where the harmonics coefficients of tension as well as the current appear in an organized form an all of the elements of that matrix are analyzed. Some topological rules are created in order to give the simplest orientation in the complex situation. The article is useful to supervise the power quality in all of the typical cases and establish a base for a more detailed analysis. [Espanol] En los ultimos tiempos cada dia mas se esta hablando sobre la calidad de la energia electrica (Power Quality) y sobre las perdidas provocadas con este factor. La distorsion de la red electrica y del consumo tiene la tendencia de seguir aumentando y cada dia mas habra que dedicar mas recursos para manejarla dentro de un rango razonable. En el articulo presentado se analiza la situacion de la calidad de energia en caso mas general y tambien simplificada para los casos especiales. A base de coeficientes de distorsion, de tension y corriente se crea una Matriz donde figuran tanto los coeficientes de armonicas de tension como de corriente en una forma ordenada y se analizan todos los elementos de esta matriz. Se crean algunas reglas topologicas para dar la orientacion mas simple en la situacion compleja. El articulo sirve para dar supervision a la calidad de energia en todos los casos tipicos y establecer una base para el analisis mas detallado.

Participation of the research institutes in the safety aspects of the Laguna Verde nuclear power plant

International Nuclear Information System (INIS)

Sanchez G, J.

1991-01-01

The main activities undertaken by two research institutes of Mexico, the Instituto de Investigaciones Electricas and the Instituto Nacional de Investigaciones Nucleares, related to the safety of the Laguna Verde Nuclear Power Plant, are described. Among these activities, the development of a system for data acquisition and analysis during pre-operational tests, the design and construction of a full-scope simulator, the in-core fuel management and the establishment of an equipment qualification laboratory, stand out. It is considered that there exists a large potential for further participation. (author)

Automatic inspection of the main primary circuit piping at the south Ukraine nuclear power plant

International Nuclear Information System (INIS)

Tanarro, A.

1995-01-01

In response to GOSKOMATOM requests, the TPEG (from The Commission of the European Communities) undertook development of the general approach to the Project, or Terms of Reference, with a view to procuring complete financing of the project through TACIS funds. Subsequently UNESA (Unidad Electrica S.A.), as the organization responsible for the On-site Assistance Project for South Ukraine NPP, jointly reviewd the contents of the project with the plant and coordinated development throughout the initial phase, which finishes in May 1995. From the very start the definition of the Project covered all the Activities required to ensure its final objective: full autonomy for the Plant to perform inspections and the capacity required for this to be achieved to a suitable level of quality

Magnetic losses and reactance change by the use of metallic conduit in electrical installations; Perdidas magneticas y cambio de reactancia por la tuberia metalica en instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, Eduardo; Castaneda D, Miguel; Castulo A, Roberto; Bratu Serban, Neagu [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1996-12-31

In this paper are presented the results obtained in the measurement of magnetic losses in metallic conduits in electric installations. The losses for parasitic currents and by hysteresis were obtained in different conditions of magnetic density, caused by the net current resulting from the sum of all the currents of all the conductors that travel along the conduit. These currents are named differential currents, and the conditions in which they appear in the electric installations are described. The magnetic induction phenomenon that occurs in metallic conduit is briefly described and the basic concepts that describe it. A theoretical-experimental methodology is offered to quantify the energy losses by parasitic currents and by the metal magnetization in these metallic conduits. At the same time, the impact of these differential currents impact in the reactance of the electric installation is quantified. The obtained results for twelve conduits of different diameters and different wall thickness are shown. A comparison analysis is made with the reported results in a previous article, where the losses were estimated by means of the temperature rise measurement of the metallic wall. [Espanol] En este articulo se presentan los resultados obtenidos en la medicion de perdidas magneticas en tuberias conduit (metalicas) en instalaciones electricas. Las perdidas por corrientes parasitas y por histeresis se obtuvieron para diferentes condiciones de densidad magnetica, provocada por la corriente neta resultante de la suma de las corrientes de todos los conductores que viajan por la tuberia. A estas corrientes se les designa corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se explica brevemente el fenomeno de induccion magnetica que se presenta en las tuberias metalicas y los conceptos basicos que la describen. Se plantea una metodologia teorico-experiemental para cuantificar las perdidas de energia, por

Magnetic losses and reactance change by the use of metallic conduit in electrical installations; Perdidas magneticas y cambio de reactancia por la tuberia metalica en instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, Eduardo; Castaneda D, Miguel; Castulo A, Roberto; Bratu Serban, Neagu [Universidad Autonoma Metropolitana-Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

In this paper are presented the results obtained in the measurement of magnetic losses in metallic conduits in electric installations. The losses for parasitic currents and by hysteresis were obtained in different conditions of magnetic density, caused by the net current resulting from the sum of all the currents of all the conductors that travel along the conduit. These currents are named differential currents, and the conditions in which they appear in the electric installations are described. The magnetic induction phenomenon that occurs in metallic conduit is briefly described and the basic concepts that describe it. A theoretical-experimental methodology is offered to quantify the energy losses by parasitic currents and by the metal magnetization in these metallic conduits. At the same time, the impact of these differential currents impact in the reactance of the electric installation is quantified. The obtained results for twelve conduits of different diameters and different wall thickness are shown. A comparison analysis is made with the reported results in a previous article, where the losses were estimated by means of the temperature rise measurement of the metallic wall. [Espanol] En este articulo se presentan los resultados obtenidos en la medicion de perdidas magneticas en tuberias conduit (metalicas) en instalaciones electricas. Las perdidas por corrientes parasitas y por histeresis se obtuvieron para diferentes condiciones de densidad magnetica, provocada por la corriente neta resultante de la suma de las corrientes de todos los conductores que viajan por la tuberia. A estas corrientes se les designa corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se explica brevemente el fenomeno de induccion magnetica que se presenta en las tuberias metalicas y los conceptos basicos que la describen. Se plantea una metodologia teorico-experiemental para cuantificar las perdidas de energia, por

Development of a dose database in the refuelling scenario of a nuclear power plant for a virtual reality application

International Nuclear Information System (INIS)

Rodenas, J.; Zarza, I.; Pascual, A.; Felipe, A.; Sanchez-Mayoral, M.L.

2002-01-01

Operators in Nuclear Power Plants can receive high doses during refuelling operation. A training program simulating refuelling operations will be useful to reduce doses received by workers as well as to minimise operation time. With this goal in mind a Virtual Reality application is developed in the frame of CIPRES Project (Calculos Interactivos de Proteccion Radiologica en un Entorno de Simulacion - Interactive Calculations of Radiological Protection in a Simulation Environment), a RD project sponsored by IBERINCO and developed jointly by IBERINCO and the Nuclear Engineering Department of the Polytechnic University of Valencia. The Virtual Reality application requires the possibility of displaying doses, both instantaneous and accumulated, at all times during the operator training. Therefore, it is necessary to elaborate a database containing dose rates at every point of the refuelling plant. This database is elaborated from Radiological Protection Surveillance data measured throughout the plant during refuelling operation. To estimate doses throughout the refuelling plant some interpolation routines have been used. Different assumptions have been adopted in order to perform the interpolation and obtain consistent data. In this paper, procedures developed to elaborate the dose database for the Virtual Reality application are presented and analysed

Generating power stations and optimization energetic of processes; Centrales generadoras y optimacion energetica de procesos

Energy Technology Data Exchange (ETDEWEB)

Gutierrez Ramirez, Ranulfo; Fernandez Montiel, Manuel Francisco [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

Some recent experiences of the Management of Thermal Processes of the Instituto de Investigaciones Electricas (IIE) related to the works on generating power stations of electricity, plants of cogeneration and energy saving are presented. [Spanish] Se presentan algunas experiencias recientes de la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas (IIE) relacionadas con los trabajos sobre centrales generadoras de electricidad, plantas de cogeneracion y ahorro de energia.

Calculation of electromagnetic fields in electric machines by means of the finite element. Algorithms for the solution of problems with known total densities. Pt. 2; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas con densidades totales conocidas. Pt. 2

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mauricio F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This article is based in the electromagnetic modeling presented in the first part. Here are only considered the magnetic systems or electric systems in closed regions with moving or axial symmetry, whose total current density or total electric load density is known. The algorithms that have been implanted in the software CLIIE-2D of the Instituto de Investigaciones Electricas (IIE) are developed in order to obtain numerical solutions for these problems. The basic systems of algebraic equations are obtained by means of the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte. Aqui solo se consideran sistemas magneticos o sistemas electricos en regiones cerradas con simetria translacional o axial, cuya densidad de corriente total o densidad de carga electrica total es conocida. Se desarrollan los algoritmos que se han implantado en el programa de computo CLIIE-2D, del Instituto de Investigaciones Electricas (IIE) con el fin de obtener soluciones numericas para estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Calculation of electromagnetic fields in electric machines by means of the finite element. Algorithms for the solution of problems with known total densities. Pt. 2; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas con densidades totales conocidas. Pt. 2

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mauricio F. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

This article is based in the electromagnetic modeling presented in the first part. Here are only considered the magnetic systems or electric systems in closed regions with moving or axial symmetry, whose total current density or total electric load density is known. The algorithms that have been implanted in the software CLIIE-2D of the Instituto de Investigaciones Electricas (IIE) are developed in order to obtain numerical solutions for these problems. The basic systems of algebraic equations are obtained by means of the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte. Aqui solo se consideran sistemas magneticos o sistemas electricos en regiones cerradas con simetria translacional o axial, cuya densidad de corriente total o densidad de carga electrica total es conocida. Se desarrollan los algoritmos que se han implantado en el programa de computo CLIIE-2D, del Instituto de Investigaciones Electricas (IIE) con el fin de obtener soluciones numericas para estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Hydraulic turbines uses for rural electric generation; Utilizacion de microturbinas para la generacion electrica en el medio rural

Energy Technology Data Exchange (ETDEWEB)

Genta, J [Facultad de Ingenieria, Instituto de Mecanica de Fluidos e Ingenieria Ambiental, Montevideo, (Uruguay); Nunes, V [Facultad de Ingenieria, Instituto de Ingenieria Electrica, Montevideo, (Uruguay)

1994-07-01

The micro turbines use for electric generation either in autonomous systems or in connection to the national net is presented like an alternative whose viability has been studied in the Agreement taken place between the UTE Administracion Nacional de Usinas y transmisiones Electricas y la Facultad de Ingenieria. The Agreement {sup S}tudy for the Installation of Micro turbines that initially considered areas far from the national electric net it extended then to near areas to the same one to analyze the cogeneration alternative. They were considered smaller and bigger powers than 1 MW and up to 5MW. For the whole study range a methodology is described of calculate primary, starting from a minimum of field information that allows a first estimate of viability of a certain place and the selection of the turbine type, for a later detailed study.

Energy saving by means of air conditioning equipment replacement and the household application of thermal insulation; Ahorro de energia electrica por reemplazo de equipos de aire acondicionado y aplicacion de aislamiento termico en viviendas

Energy Technology Data Exchange (ETDEWEB)

Peralta Solorio, Jose Luis [Fideicomiso para el Ahorro de la Energia (Mexico)

2005-07-15

An extension study of the Financing Program for Energy Saving looked for the evaluation of the electric energy saving potential obtained by the replacement of air conditioning equipment and the application of thermal insulation in 30 houses of two Mexican cities with warmth climate. In a joint effort with Comision Federal de Electricidad the consumption files of the users were analyzed and field measurements of electric demand and of refrigeration were made. As a following step the change of the refrigeration necessities derived from the application of thermal insulation were evaluated as well as the energy efficiency improvement obtained by the substitution of the air conditioning equipment and the favorable results obtained by the implementation of both measures - thermal insulation and change of air conditioning equipment in a joint form. This way, as a conclusion, the optimum sequence of application of these measures is revealed. [Spanish] Un estudio extension del Programa de Financiamiento para el Ahorro de Energia Electrica busco evaluar el potencial de ahorro de energia electrica alcanzado por el reemplazo de equipos de aire acondicionado y la aplicacion de aislamiento termico en 30 viviendas de dos ciudades mexicanas con clima calido. En un esfuerzo conjunto con la Comision Federal de Electricidad se analizaron los historiales de consumo de los usuarios y se efectuaron las mediciones de campo de demanda electrica y de refrigeracion. Como paso siguiente se valoro el cambio en las necesidades de refrigeracion derivado de la aplicacion de aislamiento termico al igual que la mejora en eficiencia energetica obtenida por la sustitucion de aire acondicionado y se identificaron los resultados favorecedores arrojados por la implementacion de ambas medidas -aislamiento termico y cambio de equipo de aire acondicionado- en forma conjunta. De esta manera, como conclusion, se devela la mas optima secuencia de aplicacion de estas medidas.

A microwave technique for electrical conductivity measurements in semiconductors; Un procedimiento en frecuencia de microondas para la medicion de la conductividad electrica en semiconductores

Energy Technology Data Exchange (ETDEWEB)

Ramirez, A; Zehe, A [Benemerita Universidad Autonoma de Puebla, Puebla (Mexico); Starostenko, O [Universidad de las Americas, Puebla, (Mexico); Perez, L [Benemerita Universidad Autonoma de Puebla, Puebla (Mexico)

2003-01-15

In the present paper a theoretical approach is given together with the description of the experimental technique for electrical conductivity measurements of semiconductors in frequency range of 10 GHz, corresponding to a wavelength of {lambda}= 3 cm. It is shown, that the sample conductivity, measured without the need of electrical contacts, Is practically identical with results obtained by direct current methods. The potential use of the method for dielectric measurements in samples of general shape is included in the discussion. Given that the local electrical field is known only in bodies of ellipsoidal shape, one has to apply approximation methods for sample shapes of practical relevance (cylinders, cubes, disks). Finally, the measuring range and corresponding errors are explained on the base of measurements realized with silicon samples. [Spanish] En el presente trabajo se desarrolla la teoria junto con la descripcion del arreglo experimental para la medicion de la conductividad electrica en muestras semiconductoras, utilizando un campo de microondas de {lambda}= 3 cm, correspondiente a una frecuencia n de 10 GHz. Se demuestra que la conductividad electrica medida sin la necesidad de contactos electricos es practicamente identica con resultados obtenidos por el metodo comun utilizando corriente directa (d.c.). Se incorpora en la discusion ademas el potencial del metodo para el estudio de propiedades dielectricas en muestras de geometria general. Dado que solamente en cuerpos con geometria elipsoidal se conoce bien el campo electrico local, y con esto el momento bipolar inducido, para muestras de geometrias mas practicas (cilindros, cubos, discos) se acude a metodos de aproximacion. Finalmente, se discute el rango de mediciones y errores, y se presentan mediciones concretas, utilizando muestras de silicio.

The use of reflecting paints on building`s roofs for energy saving; Uso de pinturas reflejantes en los techos de las edificaciones para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valera Negrete, Jose Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad, Mexico, D. F. (Mexico); Sanchez Soto, Ramon [Facultad de Ingenieria, Departamento de Termoenergia de la UNAM, Mexico, D. F. (Mexico)

1998-12-31

This paper shows the effects of the use of reflecting paints in different colors on the buildings roofs and the results in energy saving obtained in a field test carried on in Monterrey, Nuevo Leon State of Mexico using aluminum paint. [Espanol] El presente trabajo muestra los efectos del uso de pinturas reflejantes de diferentes colores en los techos de edificaciones, y los resultados de ahorro de energia electrica obtenidos en una prueba de campo efectuada en Monterrey, Nuevo Leon, Mexico, utilizando pintura de aluminio.

The use of reflecting paints on building`s roofs for energy saving; Uso de pinturas reflejantes en los techos de las edificaciones para el ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valera Negrete, Jose Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad, Mexico, D. F. (Mexico); Sanchez Soto, Ramon [Facultad de Ingenieria, Departamento de Termoenergia de la UNAM, Mexico, D. F. (Mexico)

1999-12-31

This paper shows the effects of the use of reflecting paints in different colors on the buildings roofs and the results in energy saving obtained in a field test carried on in Monterrey, Nuevo Leon State of Mexico using aluminum paint. [Espanol] El presente trabajo muestra los efectos del uso de pinturas reflejantes de diferentes colores en los techos de edificaciones, y los resultados de ahorro de energia electrica obtenidos en una prueba de campo efectuada en Monterrey, Nuevo Leon, Mexico, utilizando pintura de aluminio.

Fiber optics for voltage and current measurement; Utilizacion de fibras opticas en la medicion de voltaje y corriente

Energy Technology Data Exchange (ETDEWEB)

Mendieta Jimenez, Francisco Javier; Santos Dominguez, Martin; Gutierrez Martinez, Celso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This paper offers a brief revision of the techniques employed in the voltage and current measurement in power plants and mention is made also of its main limitations. Likewise the optical methods of transduction of the mentioned electrical variables indicating their advantages and difficulties for its implementation. Finally the activities developed at the Instituto de Investigaciones Elctricas (IIE) in this field are described. [Espanol] En este trabajo se ofrece una breve revision de las tecnicas utilizadas en la medicion de voltaje y corriente en plantas electricas y se mencionan sus principales limitaciones. Asimismo, se presentan los metodos opticos de transduccion de las variables electricas mencionadas, indicando sus ventajas y las dificultades para su realizacion. Finalmente, se describen las actividades que se desarrollan en el Instituto de Investigaciones Electricas (IIE) en este campo.

A new cascaded hydropower plants in El Sheikh Zayed Canal in the new valley in Egypt

Energy Technology Data Exchange (ETDEWEB)

Hosny Fahmy, Faten [Electronics Research Institute, Cairo (Egypt)

2000-07-01

With the streaks of the light looming in the horizon, heralding the dawn of the 21st century and the closing of the 20th century, the whole people of the world specially the sons of Egypt are full of hopes and dreams. The south Egypt development project is translation of this concept viewed from comprehensive strategic vision embracing a number of development fields covering activities in the field of agriculture, industry, transport, communication and roads as well as social aspects services such as health and education that would drive Egypt to the horizons of the 21st century. This new projects are: Toshka, New Valley or New Delta, Sheik Zayed which will feed more than a million feddans, transforming the desert into a green carpet, turning the wheels of industries and shedding off the stiffing nightmare of the choking narrow valley. This paper presents a new idea and application to know to use the water flow from the Nasser lake after raising and pumping with certain speed according to the ground slope. A series of hydro power plants are designed on certain interested points on El Sheikh Zayed Canal to generate electrical energy which will be required to feed several projects in this new valley. The results show the comparison between these eight hydro power plants w.r.t: it's generated electrical energy water release, water contents and the head of water inside each one. Also, the study contains the mathematical models of each hydropower station and the mathematical description of each reservoir, barrages and power stations. [Spanish] Con los rayos de luz asomandose en el horizonte, anunciando el amanecer del siglo XXI y el ocaso del siglo XX, todas las personas del mundo, especialmente los hijos de Egipto, estan llenos de suenos y esperanza. El proyecto de desarrollo del sur de Egipto traduce este concepto desde una vision estrategica integral que incluye un gran numero de areas de desarrollo que abarcan actividades en el campo de la agricultura, la

Advance of the National Program of Radiological Protection and Safety for medical diagnostic with X-rays; Avance del Programa Nacional de Proteccion y Seguridad Radiologica para diagnostico medico con rayos X

Energy Technology Data Exchange (ETDEWEB)

Verdejo S, M. [Direccion de Riesgos Radiologicos, Direccion General de Salud Ambiental (Mexico)

1999-07-01

The National Program of Radiological Protection and Safety for medical diagnostic with X-ray (Programa Nacional de Proteccion y Seguridad Radiologica para diagnostico medico con rayos X) was initiated in the General Direction of Environmental Health (Direccion General de Salud Ambiental) in 1995. Task coordinated with different dependences of the Public Sector in collaboration between the Secretary of Health (Secretaria de Salud), the National Commission of Nuclear Safety and Safeguards (Comision Nacional de Seguridad Nuclear y Salvaguardias) and, the National Institute of Nuclear Research (Instituto Nacional de Investigaciones Nucleares). The surveillance to the fulfilment of the standardization in matter of Radiological Protection and Safety in the medical diagnostic with X-rays has been obtained for an important advance in the Public sector and it has been arousing interest in the Private sector. (Author)

The Spanish energetic mix; prevision and historic evolution of the electric production structure; El mix energetico espanol; evolucion historica y prevista de la estructura de produccion electrica

Energy Technology Data Exchange (ETDEWEB)

Revuelta, J.; Lopez Sanz, R.

2010-07-01

This article describes the past and forecasted evolution of the electric production of the Spanish system (excluding the Spanish isolated systems), according to the records of the System Operator, Red Electrica de Espana, and the studies of its Network Planning department. The behaviour of the demand is analysed, as well as the evolution of the generation mix. The article expose the main recent changes the sector has undergone and points out the main future challenge it will face regarding the forecasted evolution of the demand, the integration of renewable energy sources, and the energy objectives established at European and national level. (Author)

Radiation protection of patients in medical exposures: regional project IAEA 2007-2008 RLA/9/57;Proteccion radiologica de pacientes en exposiciones medicas: proyecto regional IAEA 2007-2008 RLA/9/57

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

-area product (Pk, a); Mammography theme contains: Application and criteria for image quality: a study of the mammography - skull flow, Sheet for data collection in patients CC and MLO, Sheet for data collection in mammography practices, include equipment description, determination of yields, Hemi reducer thickness, determination of {sup c,} data from the patient and glandular dose; Tomography theme contains: General data about computed tomography services in the Hospital Max Peralta which include report of tests and dosimetry in phantom, in air, information from used scanners; Radiology theme contains: Dosimetry of patients in general radiology where shows forms for determining the performance of x-ray tube; Minimum values, maximum and Kerma in air average in surface of entry for PA Chest radiographs; Measures to generate the yield curve; Patient data, the technical parameters and image quality; Forms by country; Kerma in air at the entrance to the PA Chest skin, the dosimetry in general radiology is included with practices and methodology for the measurement and evaluation, also shows forms with protocols for measurements with TLDS;La proteccion radiologica de pacientes en exposiciones medicas como proyecto esta integrado por 5 regionales que abarcan unos 80 paises, 94 hospitales y 120 actividades relacionadas con radiologia y radiacion. Un taller fue desarrollado con los siguientes objetivos: proporcionar los elementos teoricos y practicos para que los profesionales en proteccion radiologica de pacientes desarrollen tareas encomendadas, identificar la metodologia de medicion mediante hojas para la captura de datos e interpretacion de los mismos, realizar ejercicios practicos de los procedimientos a aplicar en radiologia, mamografia, tomografia computarizada e intervencionismo. Dicho taller se dividio en secciones teoricas y practicas, secciones de analisis e interpretacion de datos y un examen final. Este proyecto pretende identificar fortalezas y debilidades, objetivos

Radiation protection of patients in medical exposures: regional project IAEA 2007-2008 RLA/9/57; Proteccion radiologica de pacientes en exposiciones medicas: proyecto regional IAEA 2007-2008 RLA/9/57

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

-area product (Pk, a); Mammography theme contains: Application and criteria for image quality: a study of the mammography - skull flow, Sheet for data collection in patients CC and MLO, Sheet for data collection in mammography practices, include equipment description, determination of yields, Hemi reducer thickness, determination of {sup c,} data from the patient and glandular dose; Tomography theme contains: General data about computed tomography services in the Hospital Max Peralta which include report of tests and dosimetry in phantom, in air, information from used scanners; Radiology theme contains: Dosimetry of patients in general radiology where shows forms for determining the performance of x-ray tube; Minimum values, maximum and Kerma in air average in surface of entry for PA Chest radiographs; Measures to generate the yield curve; Patient data, the technical parameters and image quality; Forms by country; Kerma in air at the entrance to the PA Chest skin, the dosimetry in general radiology is included with practices and methodology for the measurement and evaluation, also shows forms with protocols for measurements with TLDS;La proteccion radiologica de pacientes en exposiciones medicas como proyecto esta integrado por 5 regionales que abarcan unos 80 paises, 94 hospitales y 120 actividades relacionadas con radiologia y radiacion. Un taller fue desarrollado con los siguientes objetivos: proporcionar los elementos teoricos y practicos para que los profesionales en proteccion radiologica de pacientes desarrollen tareas encomendadas, identificar la metodologia de medicion mediante hojas para la captura de datos e interpretacion de los mismos, realizar ejercicios practicos de los procedimientos a aplicar en radiologia, mamografia, tomografia computarizada e intervencionismo. Dicho taller se dividio en secciones teoricas y practicas, secciones de analisis e interpretacion de datos y un examen final. Este proyecto pretende identificar fortalezas y debilidades, objetivos

Electric energy saving in the cellulose and paper industry; Ahorro de energia electrica en la industria de celulosa y papel

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

This paper delineates the results of the demonstration project for electric energy saving, which is one of the twenty four projects in which the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) sponsors the diagnosis as well as the applied measures and the measures currently in application. Also the potential opportunity areas and the measures applied and in course of application, as well as the required investments and their recuperation periods. [Espanol] En este trabajo se describen los resultados del proyecto de demostracion de ahorro de energia electrica que es uno de los veinticuatro proyectos, en los que el Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) financia tanto el diagnostico como la aplicacion de medidas. Se presentan tanto las areas de oportunidad, potenciales y medidas aplicadas y en aplicacion, asi como las inversiones requeridas y los periodos de recuperacion de las mismas.

Electric energy saving in the cellulose and paper industry; Ahorro de energia electrica en la industria de celulosa y papel

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

This paper delineates the results of the demonstration project for electric energy saving, which is one of the twenty four projects in which the Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) sponsors the diagnosis as well as the applied measures and the measures currently in application. Also the potential opportunity areas and the measures applied and in course of application, as well as the required investments and their recuperation periods. [Espanol] En este trabajo se describen los resultados del proyecto de demostracion de ahorro de energia electrica que es uno de los veinticuatro proyectos, en los que el Fideicomiso de Apoyo al Programa de Ahorro de Energia (FIDE) financia tanto el diagnostico como la aplicacion de medidas. Se presentan tanto las areas de oportunidad, potenciales y medidas aplicadas y en aplicacion, asi como las inversiones requeridas y los periodos de recuperacion de las mismas.

Self protected insulator and results of its first application tests; Aislador autoprotegido y resultados de las primeras experiencias en su aplicacion

Energy Technology Data Exchange (ETDEWEB)

De la Rosa Costilla, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1994-11-01

The limitation of the overvoltages in the distribution electric systems has been generally focussed to equipment protection. Nevertheless, there are regions where the electric networks register elevated interruption indexes or insulator damages. This presents a very clear correlation with the lightnings to ground in the different regions where the power lines go through. In this article a description is made of the utilization of a self-protected insulator, with a lightning arrester with an external series air gap as well as with a lightning arrester without an air gap, as an option to substantially reduce the interruptions caused by the atmospheric electric discharges. [Espanol] La limitacion de las sobretensiones en los sistemas electricos de distribucion ha estado generalmente enfocada a la proteccion de equipos. Sin embargo, existen regiones en donde las redes electricas registran indices elevados de interrupciones o danos a los aislamientos. Esto presenta una correlacion muy clara con los niveles de densidad de rayos a tierra en las diversas regiones que atraviesan las lineas. En este articulo se describe la utilizacion del aislador autoprotegico, tanto con un apartarrayos con entrehierro serie externo como con un apartarrayos sin entrehierro, como una alternativa para reducir substancialmente las interrupciones producidas por las descargas atmosfericas.

Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

Energy Technology Data Exchange (ETDEWEB)

Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1994-12-31

In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

Electric energy saving and its impact in the mining industry; El ahorro de energia electrica y su impacto en la industria minera

Energy Technology Data Exchange (ETDEWEB)

Urteaga Dufour, Jose Antonio [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico (FIDE), Mexico, D. F. (Mexico)

1993-12-31

In this paper are shown the most important results of the energy diagnosis performed in some representative industries of the mining industry, where opportunity areas were detected in electric energy saving, starting from those measures that do not require investment up to the ones that require medium investment, recoverable in less than two years terms as a maximum and with electric energy saving ranging from 10% to 25%. [Espanol] En este trabajo, se presentan los resultados mas importantes, obtenidos en el diagnostico energetico realizado en algunas empresas representativas de la rama de la mineria, en donde se detectaron areas de oportunidad de ahorro de energia electrica que van desde aquellas medidas que no requieren inversiones hasta las que requieren medianas inversiones, recuperables en menos de dos anos como maximo y con ahorros de energia que van desde un 10% hasta un 25%.

The photovoltaic services network: A renewable energy partnership

Energy Technology Data Exchange (ETDEWEB)

Plate, Peggy [Western Area Power Administration, (United states); Stokes, Kirk [NEOS Corporation, (United states)

1995-12-31

The Photovoltaic Services Network (PSN) is an independent organization of electric utilities established to support utility members in the use of photovoltaic (PV) power for off-grid applications. The PSN is focused on ensuring that cost-competitive, utility-grade, packaged PV products are available for various off-grid applications, such as livestock water pumping, remote residences, lighting, and cathodic protection among others. The primary objectives of the PSN are: 1) To provide education, training, and installation support as required by member utilities. 2) To establish a forum for member utilities to exchange ideas on PV program implementation and marketing strategies. 3) To create standardized system specifications for a variety of PV applications. 4) To coordinate PV product purchases for appropriate applications. 5) To identify and acquire additional funding (both publics and private) for product development and testing. 6) To pursue alliances with other organizations interested in PV. [Espanol] La Red de Servicios Fotovoltaicos (PSN) es una organizacion independiente de empresas electricas establecida para apoyar a las empresas miembro en el uso de la energia fotovoltaica en aplicaciones fuera de la red. La PSN se enfoca en garantizar que la competitividad en costo, calidad de empresa electrica de los paquetes de productos fotovoltaicos esten disponibles para varias aplicaciones fuera de la red, tales como el bombeo de agua para el ganado, residencias remotas, iluminacion y proteccion catodica entre otras. Los principales objetivos del PSN son: 1. Proporcionar educacion, entrenamiento, y apoyo en la instalacion requerida por las empresas miembro. 2. Establecer un forum de empresas miembro para intercambiar ideas sobre la puesta en practica del programa fotovoltaico y sobre la estrategias de comercializacion. 3. Crear un sistema de especificaciones estandarizadas para una variedad de aplicaciones de la energia fotovoltaica. 4. Coordinar la compra de

The photovoltaic services network: A renewable energy partnership

Energy Technology Data Exchange (ETDEWEB)

Plate, Peggy [Western Area Power Administration, (United states); Stokes, Kirk [NEOS Corporation, (United states)

1996-12-31

The Photovoltaic Services Network (PSN) is an independent organization of electric utilities established to support utility members in the use of photovoltaic (PV) power for off-grid applications. The PSN is focused on ensuring that cost-competitive, utility-grade, packaged PV products are available for various off-grid applications, such as livestock water pumping, remote residences, lighting, and cathodic protection among others. The primary objectives of the PSN are: 1) To provide education, training, and installation support as required by member utilities. 2) To establish a forum for member utilities to exchange ideas on PV program implementation and marketing strategies. 3) To create standardized system specifications for a variety of PV applications. 4) To coordinate PV product purchases for appropriate applications. 5) To identify and acquire additional funding (both publics and private) for product development and testing. 6) To pursue alliances with other organizations interested in PV. [Espanol] La Red de Servicios Fotovoltaicos (PSN) es una organizacion independiente de empresas electricas establecida para apoyar a las empresas miembro en el uso de la energia fotovoltaica en aplicaciones fuera de la red. La PSN se enfoca en garantizar que la competitividad en costo, calidad de empresa electrica de los paquetes de productos fotovoltaicos esten disponibles para varias aplicaciones fuera de la red, tales como el bombeo de agua para el ganado, residencias remotas, iluminacion y proteccion catodica entre otras. Los principales objetivos del PSN son: 1. Proporcionar educacion, entrenamiento, y apoyo en la instalacion requerida por las empresas miembro. 2. Establecer un forum de empresas miembro para intercambiar ideas sobre la puesta en practica del programa fotovoltaico y sobre la estrategias de comercializacion. 3. Crear un sistema de especificaciones estandarizadas para una variedad de aplicaciones de la energia fotovoltaica. 4. Coordinar la compra de

Industrial stacks design; Diseno de chimeneas industriales

Energy Technology Data Exchange (ETDEWEB)

Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

Industrial stacks design; Diseno de chimeneas industriales

Energy Technology Data Exchange (ETDEWEB)

Cacheux, Luis [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

The Instituto de Investigaciones Electricas (IIE) though its Civil Works Department, develops, under contract with CFE`s Gerencia de Proyectos Termoelectricos (Management of Fossil Power Plant Projects), a series of methods for the design of stacks, which pretends to solve the a present day problem: the stack design of the fossil power plants that will go into operation during the next coming years in the country. [Espanol] El Instituto de Investigaciones Electricas (IIE), a traves del Departamento de Ingenieria Civil, desarrolla, bajo contrato con la Gerencia de Proyectos Termoelectricos, de la Comision Federal de Electricidad (CFE), un conjunto de metodos para el diseno de chimeneas, con el que se pretende resolver un problema inmediato: el diseno de las chimeneas de las centrales termoelectricas que entraran en operacion durante los proximos anos, en el pais.

System for the reliability analysis of the electric energy supply; Sistema para el analisis de confiabilidad del suministro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Perales, Favio; Martinez, Javier; Huesca, Francisco; Garcia, Norma; Nieva, Rolando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

A computer tool, developed for the reliability evaluation of the electric energy supply, considering the faults in the generation and transmission systems, is presented. The application of the tool in planning the expansion and operation of the electric systems, the methodology of the solution employed and the various functions it accounts for, are described. At the end some illustrative examples of its applications by means of the studies with a model of representative characteristics of the interconnected national system. [Espanol] Se presenta una herramienta computacional desarrollada para evaluar la confiabilidad del suministro de energia electrica, considerando las fallas en los sistemas de generacion y transmision. Se describen las aplicaciones de la herramienta en la planeacion de la expansion y de la operacion de sistemas electricos, la metodologia de solucion empleada y las diversas funciones con que cuenta. Al final se presentan algunos ejemplos ilustrativos de sus aplicaciones mediante estudios con un modelo de caracteristicas representativas del sistema interconectado nacional.

System for the reliability analysis of the electric energy supply; Sistema para el analisis de confiabilidad del suministro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Perales, Favio; Martinez, Javier; Huesca, Francisco; Garcia, Norma; Nieva, Rolando [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

A computer tool, developed for the reliability evaluation of the electric energy supply, considering the faults in the generation and transmission systems, is presented. The application of the tool in planning the expansion and operation of the electric systems, the methodology of the solution employed and the various functions it accounts for, are described. At the end some illustrative examples of its applications by means of the studies with a model of representative characteristics of the interconnected national system. [Espanol] Se presenta una herramienta computacional desarrollada para evaluar la confiabilidad del suministro de energia electrica, considerando las fallas en los sistemas de generacion y transmision. Se describen las aplicaciones de la herramienta en la planeacion de la expansion y de la operacion de sistemas electricos, la metodologia de solucion empleada y las diversas funciones con que cuenta. Al final se presentan algunos ejemplos ilustrativos de sus aplicaciones mediante estudios con un modelo de caracteristicas representativas del sistema interconectado nacional.

The Chernobyl accident and the Spanish nuclear power plants. Technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-11-15

On the morning of April 26, 1986, Unit 4 of the Chernobyl Nuclear Power Plant (Ukraine, USSR) suffered an accident of the greatest magnitude among those which have taken place in nuclear energy installations employed for peaceful uses. The accident reached a degree of severity unknown up to now in nuclear energy generating plants, both with respect to the loss of human lives and the effects caused to the neighboring population (as well as to other nations within a wide radius of radioactivity dispersal), and also with respect to the damage caused in the nuclear plant itself. In the light of the anxiety created internationally, the USSR State Committee for the Utilization of Atomic Energy prepared a report (1), based on the conclusions of the Governmental Commission entrusted to study the causes of the accident, which was presented at the international meeting of experts held at the International Atomic Energy Agency (IAEA) headquarters in Vienna from August 25 to 29, 1986. The present technical report has been prepared by the Spanish nuclear power plants within the framework of UNIDAD ELECTRICA, S.A. (UNESA) - the Association of Spanish electric utilities - in collaboration with EMPRESARIOS AGRUPADOS, S.A. The report reflects the utilities' analyses of the causes and consequences of the accident and, based on similarities and differences with Spanish plants under construction and in operation, intends to: a. Evaluate the possibility of an accident with similar consequences occurring in a Spanish plant b. Identify possible design and operation modifications indicated by the lessons learned from this accident.

The Chernobyl accident and the Spanish nuclear power plants. Technical report

International Nuclear Information System (INIS)

1986-11-01

On the morning of April 26, 1986, Unit 4 of the Chernobyl Nuclear Power Plant (Ukraine, USSR) suffered an accident of the greatest magnitude among those which have taken place in nuclear energy installations employed for peaceful uses. The accident reached a degree of severity unknown up to now in nuclear energy generating plants, both with respect to the loss of human lives and the effects caused to the neighboring population (as well as to other nations within a wide radius of radioactivity dispersal), and also with respect to the damage caused in the nuclear plant itself. In the light of the anxiety created internationally, the USSR State Committee for the Utilization of Atomic Energy prepared a report (1), based on the conclusions of the Governmental Commission entrusted to study the causes of the accident, which was presented at the international meeting of experts held at the International Atomic Energy Agency (IAEA) headquarters in Vienna from August 25 to 29, 1986. The present technical report has been prepared by the Spanish nuclear power plants within the framework of UNIDAD ELECTRICA, S.A. (UNESA) - the Association of Spanish electric utilities - in collaboration with EMPRESARIOS AGRUPADOS, S.A. The report reflects the utilities' analyses of the causes and consequences of the accident and, based on similarities and differences with Spanish plants under construction and in operation, intends to: a. Evaluate the possibility of an accident with similar consequences occurring in a Spanish plant b. Identify possible design and operation modifications indicated by the lessons learned from this accident

Influencia de la generación distribuida en los niveles de cortocircuito y en las protecciones eléctricas en subestaciones de 110 / 34,5 kV; The effects caused due to the introduction of Distribution Generation in the short-circuit levels and the protecti

Directory of Open Access Journals (Sweden)

Marta Bravo de las Casas

2011-02-01

Full Text Available En este trabajo se muestran algunos resultados de los efectos provocados por la introducción de la GD enlas redes cubanas en lo que respecta a los niveles de cortocircuito y los ajustes de las protecciones en cincosubestaciones de 110 / 34,5 kV ubicadas en las provincias de Villa Clara, Cienfuegos y Sancti Spíritus. Seobtuvieron conclusiones importantes con respecto a las necesidades de funciones de protección y criteriosde ajuste de las protecciones. Además, con respecto a la necesidad de tener en las subestaciones relésdigitales modernos con el fin de que puedan responder correctamente y en el menor tiempo posible a losdiferentes escenarios de operación que tendrá el sistema en las nuevas condiciones y así corresponder a lasexigencias que impone la GD a los esquemas de protección. In this article, results are shown of the effects caused due to the introduction of Distribution Generation(DG in the Cuban Networks with respect to short-circuit levels and the protection settings of five 110/34.5kV substations located in the provinces of Villa Clara, Cienfuegos y Sancti Spíritus. Important conclusionshave been obtained with respect to the necessities of the protection functions and their settings criteria.Besides, with respect to the necessity of having modern digital relays in order to respond correctly and inthe least possible time to the different stages of operation that the system may have in the new conditionsof operation and in this manner corresponds to the demands that the DG imply in protection systems. 

Weather impact on the electric energy consumption of domestic users; Impacto del clima en el consumo de energia electrica en los usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

It is said that when an energy saving and efficient use of energy program is implemented it must be a business for three: the user, the society and the electric utility. In respect to the user, his decision making is quite simple: is it cheaper or more expensive for me?. Unfortunately in many cases we want a very short return time or the money needed for the initial investment is not available. For instance, and incandescent bulb is several times less expensive than a compact fluorescent lamp, but if we make the calculation on the life-time and on the power consumption reduction of the compact fluorescent lamp, we can conclude that this one is more economic. The benefit for the society can be seen under many different aspects, being the most important the natural resources conservation and the environment. From the stand point of the utility the heavier possible factors are the postponement of the investments and the system reliability. When some of the programs of the Demand Side Management (DSM) are applied, the utilities support or promote non financially profitable but improve their image before the user, on creating a consciousness in the saving and in the efficient use of energy: a short term investment is made and a long term revenue is obtained. For this reason for an optimum selection and implementation the saving and the efficient use of electric energy measures a detailed knowledge of the consumption way is required. In this paper the importance of monitoring the way the different type of users employ the energy in order to make up decisions on DSM programs in many different scenarios: cities, type of users, income level, etc. is shown. [Espanol] Se dice que cuando se implementa un programa de ahorro y uso eficiente de la energia electrica, debe ser negocio para tres: el usuario, la sociedad y la empresa electrica. En lo que respecta al usuario, su toma de decision es muy simple: me resulta mas barato o mas caro. Desafortunadamente en muchos de los casos

Weather impact on the electric energy consumption of domestic users; Impacto del clima en el consumo de energia electrica en los usuarios domesticos

Energy Technology Data Exchange (ETDEWEB)

Ramos Niembro, Gaudencio; Fiscal Escalante, Raul [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

It is said that when an energy saving and efficient use of energy program is implemented it must be a business for three: the user, the society and the electric utility. In respect to the user, his decision making is quite simple: is it cheaper or more expensive for me?. Unfortunately in many cases we want a very short return time or the money needed for the initial investment is not available. For instance, and incandescent bulb is several times less expensive than a compact fluorescent lamp, but if we make the calculation on the life-time and on the power consumption reduction of the compact fluorescent lamp, we can conclude that this one is more economic. The benefit for the society can be seen under many different aspects, being the most important the natural resources conservation and the environment. From the stand point of the utility the heavier possible factors are the postponement of the investments and the system reliability. When some of the programs of the Demand Side Management (DSM) are applied, the utilities support or promote non financially profitable but improve their image before the user, on creating a consciousness in the saving and in the efficient use of energy: a short term investment is made and a long term revenue is obtained. For this reason for an optimum selection and implementation the saving and the efficient use of electric energy measures a detailed knowledge of the consumption way is required. In this paper the importance of monitoring the way the different type of users employ the energy in order to make up decisions on DSM programs in many different scenarios: cities, type of users, income level, etc. is shown. [Espanol] Se dice que cuando se implementa un programa de ahorro y uso eficiente de la energia electrica, debe ser negocio para tres: el usuario, la sociedad y la empresa electrica. En lo que respecta al usuario, su toma de decision es muy simple: me resulta mas barato o mas caro. Desafortunadamente en muchos de los casos

A simple and efficient formula for saving electric energy in lighting systems; Una formula sencilla y eficaz para ahorrar energia electrica en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Figueroa Noriega, L. R. [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico, Mexico, D. F. (Mexico)

1995-12-31

In the Metropolitan Area of Mexico City, as well as in other regions with a similar climate, there are an important number of users of the electric energy service, whose main load consists of lighting, since systems such as environmental conditioning, refrigeration, pumping and others are either not necessary or lack of importance as electric energy consumers. These are classified in the range of small users that altogether represent a significant saving, but the precarious diffusion of the technological advances have not contemplated the need of carrying on corrective actions. Among these users are the offices, sites of entertainment and a range of commerces and services such as clothing stores, pharmacies, shoe stores, printing shops, dry cleaner`s, restaurants, barber shops, etc. The present paper pretends to provide a simple methodology easy to carry on, derived form a demonstrative project that FIDE (Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico) successfully carried out for the Club Deportivo Berinbau. [Espanol] En el area Metropolitana de la ciudad de Mexico, asi como en otras regiones con clima similar, existe un numero importante de usuarios del servicio de energia electrica cuya carga principal consiste en iluminacion, ya que sistemas como acondicionamiento ambiental, refrigeracion, bombeo y otros, o bien no son necesarios o carecen de la importancia en cuanto a consumo de energia electrica. Estos se catalogan dentro del rango de pequenos usuarios que en conjunto representan un potencial de ahorro significativo pero que, debido a la precaria difusion de los adelantos tecnologicos, no han contemplado la posibilidad de llevar a cabo acciones correctivas. Entre estos usuarios se encuentran oficinas, lugares de esparcimiento, planteles educativos y una gama de comercios y servicios como tiendas de ropa, farmacias, zapaterias, imprentas, tintorerias, restaurantes, peluquerias, etc. El presente trabajo pretende proporcionarles una

A simple and efficient formula for saving electric energy in lighting systems; Una formula sencilla y eficaz para ahorrar energia electrica en sistemas de iluminacion

Energy Technology Data Exchange (ETDEWEB)

Figueroa Noriega, L R [Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico, Mexico, D. F. (Mexico)

1996-12-31

In the Metropolitan Area of Mexico City, as well as in other regions with a similar climate, there are an important number of users of the electric energy service, whose main load consists of lighting, since systems such as environmental conditioning, refrigeration, pumping and others are either not necessary or lack of importance as electric energy consumers. These are classified in the range of small users that altogether represent a significant saving, but the precarious diffusion of the technological advances have not contemplated the need of carrying on corrective actions. Among these users are the offices, sites of entertainment and a range of commerces and services such as clothing stores, pharmacies, shoe stores, printing shops, dry cleaner`s, restaurants, barber shops, etc. The present paper pretends to provide a simple methodology easy to carry on, derived form a demonstrative project that FIDE (Fideicomiso de Apoyo al Programa de Ahorro de Energia del Sector Electrico) successfully carried out for the Club Deportivo Berinbau. [Espanol] En el area Metropolitana de la ciudad de Mexico, asi como en otras regiones con clima similar, existe un numero importante de usuarios del servicio de energia electrica cuya carga principal consiste en iluminacion, ya que sistemas como acondicionamiento ambiental, refrigeracion, bombeo y otros, o bien no son necesarios o carecen de la importancia en cuanto a consumo de energia electrica. Estos se catalogan dentro del rango de pequenos usuarios que en conjunto representan un potencial de ahorro significativo pero que, debido a la precaria difusion de los adelantos tecnologicos, no han contemplado la posibilidad de llevar a cabo acciones correctivas. Entre estos usuarios se encuentran oficinas, lugares de esparcimiento, planteles educativos y una gama de comercios y servicios como tiendas de ropa, farmacias, zapaterias, imprentas, tintorerias, restaurantes, peluquerias, etc. El presente trabajo pretende proporcionarles una

Alternative analysis to increase the power in combined-cycle power plants; Analisis de alternativas para el incremento de potencia en plantas termoelectricas de Ciclo Combinado

Energy Technology Data Exchange (ETDEWEB)

Pacheco Cruz, Hector; Arriola Medellin, Alejandro M. [Gerencia de Procesos Termicos, Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: hpacheco@iie.org.mx; aarriola@iie.org.mx

2010-11-15

The electricity industry traditionally had two thermodynamic cycles for power generation: conventional steam turbine (Rankine cycle) used to supply a base load during the day, and gas turbines (Brayton cycle), for its speed response, normally used to cover peak loads. However, to provide variable peak loads, the gas turbine, as a volumetric machine is affected by the change in air density by changing the combustion temperature. This paper shows the scheme of integration of both systems, that it's known as combined cycle and the different options that would have these power plants, to maintain or increase their power in variable ambient conditions. It analyzes different options, such as: 1. Supplementary fire in the stove. 2. Air cooling intake in the gas turbine (evaporation system or mechanical system). 3. Steam injection in the combustion chamber. [Spanish] La industria electrica tradicionalmente a contado con dos ciclos termodinamicos para generacion electrica: las turbinas convencionales de vapor (ciclo de Rankine) se utilizan para suministrar una carga base durante el dia, y las turbinas de gas (ciclo de Brayton), por su rapidez de respuesta, se utilizan normalmente para cubrir las cargas pico. Sin embargo, para suministrar las cargas variables pico, la turbina a gas, por ser una maquina volumetrica, se ve afectada por el cambio de la densidad del aire de combustion al cambiar la temperatura ambiente. En este trabajo se muestra el esquema de integracion de ambos sistemas, en lo que se conoce como ciclo combinado y las diferentes opciones que tendrian estas plantas de generacion electrica para mantener o incrementar su potencia en condiciones ambiente variable. Para ello se analizan diferentes opciones, tales como: 1.- Combustion suplementaria en el recuperador de calor. 2.- Enfriamiento del aire de admision a la turbina de gas (mediante un sistema de evaporacion o mediante un sistema mecanico). 3.- Inyeccion de vapor a la camara de combustion. Palabras

Analysis of the generation of electric energy through the use of biogas obtained from sanitary fillings in Mexico; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico

Energy Technology Data Exchange (ETDEWEB)

Cerda Sauvage, Tania Kalinka [Facultad de Ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2004-06-15

Through this work a theoretical analysis conducted for the use of biogas obtained from sanitary landfills for the generation of electrical energy is presented, as well as the evaluation of the main elements that limit or favor the development of this technology in our country. In the introductory part of this work are presented some causes considered have favored the development of technologies as the one proposed here. In the first part it is exposed what the biogas is and what conditions are necessary for its production, which explains the production of biogas in the sanitary landfills, in addition, describes the distribution of the solid residues that give raise to the present situation of the sanitary landfills and the biogas production process in these. The work continues with a description of the electrical energy generation process through the gas originated in sanitary landfills, indicating the necessary conditions in order that the filling complies with its basic functions; following our process until obtaining the final item, electrical energy. For the description of the process and to analyze some factors that take part, it is advisable to include the main aspects of a plant located in Monterrey that occupies this technology. This project shows project shows off in a tangible form the barriers that this technology faces, as well as its main advantages and disadvantages. Are exposed the limiting factors of this technology in technological, economic, political and social aspects, the barriers that can and must overcome as well as the reasons that justify the effort to overcome them. Finally are presented the conclusions it arrives, as well as the commentaries and suggestions in respect to the subject. [Spanish] A traves de este trabajo se expone un analisis teorico efectuado al uso de biogas extraido de rellenos sanitarios para la generacion de energia electrica, asi como evaluar los principales elementos que limitan o favorecen el desarrollo de esta

Reliability of electric generation units by evaluating the loss of power and efficiency of turbines; Confiabilidad de las unidades de generacion electrica mediante la evaluacion de la perdida de potencia y eficiencia de las turbinas

Energy Technology Data Exchange (ETDEWEB)

Ramirez Solis, Jose Antonio; Cristalinas Navarro, Victor Manuel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2012-07-01

The aim of the specialized technical service to evaluate the loss of power and efficiency of an open steam turbine is to quantify these losses caused by the deterioration of internal seals, deterioration of the steam path geometry components (nozzles and blades) and increased roughness of the blades and nozzle surface due to erosion (steam, humidity and impacts) and, also, due to salts deposition. In the same way, to establish a set of recommendations, in order of importance by the attention of the Power Plant with the purpose of recovering the major quantity of power and efficiency lost by the steam turbine and assurance, by means of technical supervision of the activities set in the recommendations, and in accordance with CFE rules, international standards and the personal experience of the Instituto de Investogaciones Electricas (IIE), staff, an acceptable quality in rehabilitation of mechanical components such as the maintenance of the steam turbine itself. Using an application example, this paper describes, the methodology of execution of this kind of services. Also, the quality of the maintenance and the rehabilitation of the steam turbine components are quantified. [Spanish] El objetivo del servicio tecnico especializado para evaluar la perdida de potencia y eficiencia de una turbina de vapor abierta es cuantificar dichas perdidas a causa del deterioro de los sellos internos, del deterioro la geometria de referencia de los componentes del canal de vapor (alabes fijos y alabes moviles) y del aumento de la rugosidad de la superficie de los alabes a causa de la erosion (marcas de vapor, de humedad y de impactos) y de la deposicion de sales. Asimismo, establecer una serie de recomendaciones en orden prioritario para la atencion de la central, con el fin de recuperar la mayor parte de la potencia y eficiencia perdidas por la turbina y asegurando, mediante la supervision tecnica de las actividades resultantes de las recomendaciones y conforme a la normativa de la

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J.I.; Morillon Galvez, D. [CONAE, Mexico, D. F. (Mexico)

1995-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

Comparative analysis of the indexes of electric power density in buildings lighting systems; Analisis comparativo de los indices de densidad de potencia electrica de los sistemas de alumbrado en edificios

Energy Technology Data Exchange (ETDEWEB)

Cruz Hernandez, J I; Morillon Galvez, D [CONAE, Mexico, D. F. (Mexico)

1996-12-31

The national situation of the lighting systems in buildings is presented in order to know its consumption and make comparisons in accordance with the terms of the Electric Power Density that the lighting systems must satisfy, recently published in the norm, NOM 007 ENER-1995 (Energy Efficiency for non Residential Buildings` Lighting Systems). The form of application of the norm to determine the Electric Power Density Indexes in Lighting Buildings (EPDIL) is described, which permitted to know the current situation of the lighting systems, to compare the results internationally and with the ones specified in the proper norm. As a conclusion, there is the need of enhancing the efficiency of the lightning systems, with savings technologies, improve the lightning levels and equalize the energy indexes of the EPDIL with the ones recommended. [Espanol] Se presenta un estudio sobre la situacion nacional de los sistemas de alumbrado en edificios, con el objeto de conocer su consumo y compararlos, de acuerdo a los terminos de densidad de potencia electrica que deben cumplir los sistemas de alumbrado, publicados recientemente en la norma, NOM 007 ENER-1995 (Eficiencia Energetica para los Sistemas de Alumbrado en Edificios no Residenciales). Se describe la forma de aplicar la norma para determinar los indices de densidad de potencia electrica en alumbrado (DPEA) en edificios, lo cual permitio conocer la situacion actual de los sistemas de alumbrado, comparar con los reportados internacionalmente y con los especificados en la propia norma. Como conclusion se tiene la necesidad de eficientizar los sistemas de alumbrado, con tecnologia ahorradora, mejorar los niveles de iluminacion e igualar los indices energeticos de DPEA con los recomendados.

Results of the Service of External Dosimetry of the Centro de Proteccion e Higiene de las Radiaciones (CPHR), Cuba during the biennium 2010 - 2011

International Nuclear Information System (INIS)

Molina Perez, Daniel; Verdecia Sanchez, Maribel; Castro Soler, Ailza; Farrada Neyra, Yamilia

2013-01-01

The Service of Personal Dosimetry of the External Dosimetry Laboratory of the Centro de Proteccion y Higiene de las Radiaciones - CPHR of Cuba works with an automatic RADOS TLD system and includes the surveillance of the doses of whole body and extremities for photon radiation. The work presents the results of the service in the period 2010-2011, showing data related to the number and distribution of workers monitored for areas. The levels of occupational exposure area analyzed using various indicators such as: annual average dose for areas, number of workers who receive annual doses greater than zero, distribution of workers by dose intervals, and others. These indicators are compared with previous periods and with the values published by the UNSCEAR. In general, the average annual dose for all areas was less than 1 mSv for whole body and 3 mSv for hands. The number of exposed workers experienced significant variation from one year to another, considerably decreasing from 60% to 12% of the total. The work presents an analysis of this behavior and highlights that the country guarantees the personal dosimetry to 100% of exposed workers and that the results of the occupational exposure are within the established requirements

The distribution of the electric energy consumed in the World Trade Center building; La distribucion de la energia electrica consumida en el edificio World Trade Center

Energy Technology Data Exchange (ETDEWEB)

Gaona de la Fuente, Alvaro; Carrillo Borja, Angel [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

This document describes the distribution of the electric energy in the World Trade Center building. Also called the Business International Capital, it is a modern international concept that integrates under the same roof services and supports required by the foreign commerce, with a great 50 stories high building, information network, a business center, a commercial center, an international center for exhibits and conventions and a luxury hotel. It is a modern building equipped with a numberless technological advancements an a total installed electrical load of 35000 kVA. The distribution structures utilized for high buildings are described, the structure that was decided to adopt in the World Trade Center, the requirement for the execution of the distribution electric work, the Luz y Fuerza installations in the buildings conglomerate, the operation and maintenance of the distribution network of this building and the basic needs for new installations of this type of buildings [Espanol] En el presente documento se describe la distribucion de la energia electrica del edificio World Trade Center de la ciudad de Mexico. Llamado tambien la capital internacional de los negocios es un moderno concepto internacional que integra bajo un mismo techo servicios y apoyos que se requieren para el comercio exterior contando con una gran torre de 50 pisos, red de informacion, un centro de negocios, un centro comercial, un centro internacional de exposiciones y convenciones y un hotel de lujo. Es un edificio moderno equipado con un sinnumero de adelantos tecnologicos y con una carga total instalada de 35000 kVA. Se describen las estructuras de distribucion utilizadas en edificios altos, la estructura que se decidio implantar en el World Trade Center, los requerimientos para la ejecucion de la obra electrica de distribucion, las instalaciones de Luz y Fuerza en el conjunto de dicho edificio, la operacion y mantenimiento de la red de distribucion de este edificio, y las necesidades

Environmental management in Chile: The power plants case; Gestion ambiental en Chile: Caso de las centrales termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Jadrijevic, Maritza [Comision Nacional del Medio Ambiente, (Chile)

1997-12-31

In this paper are presented the general aspects of the historic evolution o the legal norms on environmental matters in Chile; general aspects of the electric generation system and the instruments of environmental management currently applied in the fossil fueled power plants, such as: the assessment system of the environmental impact; compliance of the air quality and emissions Standards and plans for decontamination [Espanol] En este trabajo se dan a conocer aspectos generales de la evolucion historica de las normas juridicas en materia ambiental en Chile; aspectos generales del sistema de generacion electrica y los instrumentos de gestion ambiental que actualmente se aplican a las plantas de generacion termoelectricas, tales como: el sistema de evaluacion de impacto ambiental; cumplimiento de normas de la calidad de aire y de emision y, planes de descontaminacion

Environmental management in Chile: The power plants case; Gestion ambiental en Chile: Caso de las centrales termoelectricas

Energy Technology Data Exchange (ETDEWEB)

Jadrijevic, Maritza [Comision Nacional del Medio Ambiente, (Chile)

1996-12-31

In this paper are presented the general aspects of the historic evolution o the legal norms on environmental matters in Chile; general aspects of the electric generation system and the instruments of environmental management currently applied in the fossil fueled power plants, such as: the assessment system of the environmental impact; compliance of the air quality and emissions Standards and plans for decontamination [Espanol] En este trabajo se dan a conocer aspectos generales de la evolucion historica de las normas juridicas en materia ambiental en Chile; aspectos generales del sistema de generacion electrica y los instrumentos de gestion ambiental que actualmente se aplican a las plantas de generacion termoelectricas, tales como: el sistema de evaluacion de impacto ambiental; cumplimiento de normas de la calidad de aire y de emision y, planes de descontaminacion

Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

Energy Technology Data Exchange (ETDEWEB)

Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1995-12-31

The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

Energy Technology Data Exchange (ETDEWEB)

Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

Assessment and planning of the electrical systems in Mexican refineries by 2014

Energy Technology Data Exchange (ETDEWEB)

Ruiz Flores, Luis Ivan; Rodriguez Martinez, Jose Hugo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Dario Taboada; Guillermo; Pano Jimenez, Javier [PEMEX, (Mexico)

2012-07-01

Nowadays the refining sector in Mexico needs to increase the quantity and quality of produced fuels by installing new process plants for gasoline and ultra-low sulphur diesel. These plants require the provision of electricity and steam, among other services to function properly, which can be supplied by the power plants currently installed in each refinery through an expansion of their generation capacity. These power plants need to increase its production of electricity and steam at levels above their installed capacity, which involves the addition of new power generating equipment (gas or steam turbo-generators) as well as the raise of the electrical loads. Currently, the Mexican Petroleum Company (PEMEX) is planning to restructure their electrical and steam systems in order to optimally supply the required services for the production of high quality fuels. In this paper the present status of the original electrical power systems of the refineries is assessed and the electrical integration of new process plants in the typical schemes is analyzed. Also this paper shows the conceptual schemes proposed to restructure the electrical power system for two refineries and the strategic planning focused on implement the modifications required for the integration of new process plants that will demand about 20 MW for each refinery by 2014. The results of the analysis allowed to identify the current conditions of the electrical power systems in the oil refining industry or National Refining Industry (NRI), and thereby to offer technical solutions that could be useful to engineers facing similar projects. [Spanish] Hoy en dia, el sector de refinacion en Mexico necesita aumentar la cantidad y calidad de los combustibles producidos, mediante la instalacion de nuevas plantas de proceso para la gasolina y el diesel ultra bajo en azufre. Estas plantas requieren el suministro de electricidad y vapor de agua, entre otros servicios, para que funcione correctamente, los cuales pueden

The satisfaction of developing a project of electrical energy saving; La satisfaccion de desarrollar un proyecto de ahorro de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Arreola Suarez, Alejandro [Hotel Club Marival, Nuevo Vallarta, Nayarit (Mexico)

2002-09-01

The projects for the energy saving in hotels represent a great opportunity to reduce the operation costs in the demand and consumption of electrical energy, since the existing facilities can take advantage of new technologies in illumination, air conditioning, refrigeration and heating. By their constitution, the hotels work the year around uninterruptedly and must provide all type of services to the guests and working personnel, which originates that they consume great amounts of energy in air conditioning, lightning, laundry, etc., since the prestige of the installation depends on it. [Spanish] Los proyectos para el ahorro de energia en hoteles representan una gran oportunidad para reducir costos de operacion en la demanda y consumo de energia electrica, ya que las instalaciones existentes pueden aprovechar nuevas tecnologias en iluminacion, aire acondicionado, refrigeracion y calefaccion. Por su constitucion, los hoteles trabajan ininterrumpidamente todo el ano y deben proporcionar toda clase de servicios a los huespedes y personal que labora, lo cual origina que consuman grandes cantidades de energia en aire acondicionado, iluminacion, lavanderia, etc., pues de ello depende el prestigio de la instalacion.

Questions to the reactors power upgrade of the Nuclear Power Plant of Laguna Verde

International Nuclear Information System (INIS)

Salas M, B.

2014-08-01

The two reactors of the Nuclear Power Plant of Laguna Verde (NPP-L V) were subjected to power upgrade labors with the purpose of achieving 20% upgrade on the original power; these labors concluded in August 24, 2010 for the Reactor 1 and in January 16, 2011 for the Reactor 2, however in January of 2014, the NNP-L V has not received by part of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) the new Operation License to be able to work with the new power, because it does not fulfill all the necessary requirements of safety. In this work is presented and analyzed the information obtained in this respect, with data provided by the Instituto Federal de Acceso a la Informacion Publica y Proteccion de Datos (IFAI) and the Comision Federal de Electricidad (CFE) in Mexico, as well as the opinion of some workers of the NPP-L V. The Governing Board of the CFE announcement that will give special continuation to the behavior on the operation and reliability of the NPP-L V, because the frequency of not announced interruptions was increased 7 times more in the last three years. (Author)

Application of unimodal optic fiber to communications among electric substations; Aplicacion de fibra optica unimodal a comunicaciones entre subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Martinez Pinon, Fernando; Hernandez Juarez, Taide [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-07-01

The utilization of the unimodal fiber optics technology in the electric power systems, represents one of the best communication options because of its multiple advantages, that results in a better coordination of the technical and administrative activities, needed to carry the electric energy from its generation site to the most remote locations. In this document a study, in accordance with the available options for the design of communication systems via unimodal optic fiber, is presented. With this technology, ties of more than 100 kilometers without the need of repeating stations, can be made. [Espanol] La utilizacion de la tecnologia de fibra optica unimodal en los sistemas electricos de potencia representa una de las mejores alternativas de comunicacion por sus multiples ventajas que se traducen en una mejor coordinacion de las acitividades tecnicas y administrativas necesarias para llevar la energia electrica desde el lugar de generacion hasta los puntos mas distantes. En este documento se presenta un estudio de acuerdo a las opciones disponibles para el diseno de sistemas de comunicacion por fibra optica unimodal. Con esta tecnologia se pueden realizar enlaces mayores que 100 km sin necesidad de repetidores.

Analysis and design of a dish/Stirling system for solar electric generation with a 2.7 kW air-cooled engine; Analisis y diseno de un sistema de generacion electrica termosolar con concentrador de disco parabolico y motor Stirling de 2.7 kW enfriado por aire

Energy Technology Data Exchange (ETDEWEB)

Beltran-Chacon, R.; Velazquez-Limon, N. [Universidad Autonoma de Baja California, Baja California (Mexico)]. E-mails: rbeltran1@uabc.edu.mx; nicolas.velazquez@uabc.edu.mx; Sauceda-Carvajal, D. [Universidad Politecnica de Baja California, Baja California (Mexico)]. E-mail: dsaucedac@upbc.edu.mx

2012-01-15

This paper presents a mathematical modeling, simulation and design of a solar power system of a parabolic dish with an air-cooled Stirling engine of 2.7 kW. The model used for the solar concentrator, the cavity and the Stirling engine were successfully validated against experimental data. Based on a parametric study, the design of the components of the engine is carried out. The study shows that as system capacity increases, the overall efficiency is limited by the power required by the fan, since the design of the cooler needs greater amounts of heat removal by increasing the air flow without affecting the internal conditions of the process (mass flow of working gas and internal dimensions of the same). The system was optimized and achieves an overall efficiency of solar to electric energy conversion of 26.7%. This study shows that the use of an air-cooled Stirling engine is potentially attractive for power generation at low capacities. [Spanish] Este trabajo presenta un modelado matematico, la simulacion y diseno de un sistema de generacion electrica termosolar de disco parabolico con motor Stirling de 2.7 kW enfriado directamente por aire. El modelo utilizado para el concentrador, la cavidad y el motor Stirling, fueron validados satisfactoriamente con datos experimentales. Con base en un estudio parametrico se realizo el dimensionamiento de los componentes del motor. El estudio realizado muestra que conforme se incrementa la capacidad del sistema, la eficiencia global se ve limitada por la potencia requerida por el ventilador, dado que el diseno del enfriador necesita retirar mayores cantidades de calor aumentando el flujo de aire, sin afectar las condiciones internas del proceso (flujo masico del gas de trabajo y dimensiones internas del mismo). El sistema fue optimizado obteniendo una eficiencia global de conversion de energia solar a electrica de 26.7%. Este estudio muestra que el uso de un motor Stirling enfriado directamente por aire es potencialmente

Boehringer Ingelheim Promeco contemplates the benefits of cogeneration in its new plant; Boehringer Ingelheim Promeco contempla beneficios de la cogeneracion para su nueva planta

Energy Technology Data Exchange (ETDEWEB)

Ruiz Esparza, R. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Khouri Solis, A. [Boehringer Ingelheim Promeco, Mexico, D. F. (Mexico)

1997-12-31

This paper presents the results of the feasibility study performed in BOEHRINGER INGELHEIM PROMECO to determine the benefits that a cogeneration system could render in satisfying the energy demand of its plant currently being expanded. The results showed that in accordance with the operation mode of the already expanded plant, the highest benefits could be obtained of a cogeneration system with a capacity of 1,600 Kw that would partially satisfy the thermal and electrical demands of BOEHRINGER INGELHEIM PROMECO. [Espanol] El presente articulo presenta los resultados de factibilidad que se realizo en Boehringer Ingelheim Promeco para determinar los beneficios que podria rendir un sistema de cogeneracion al satisfacer las demandas energeticas de su planta actualmente en ampliacion. Los resultados mostraron que de acuerdo al modo de operacion de la planta ya ampliada, los beneficios mas altos se obtendrian de un sistema de cogeneracion con capacidad de 1,600 kW que satisfaria parcialmente las demandas termicas y electricas de Boehringer Ingelheim Promeco.

Boehringer Ingelheim Promeco contemplates the benefits of cogeneration in its new plant; Boehringer Ingelheim Promeco contempla beneficios de la cogeneracion para su nueva planta

Energy Technology Data Exchange (ETDEWEB)

Ruiz Esparza, R [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Khouri Solis, A [Boehringer Ingelheim Promeco, Mexico, D. F. (Mexico)

1998-12-31

This paper presents the results of the feasibility study performed in BOEHRINGER INGELHEIM PROMECO to determine the benefits that a cogeneration system could render in satisfying the energy demand of its plant currently being expanded. The results showed that in accordance with the operation mode of the already expanded plant, the highest benefits could be obtained of a cogeneration system with a capacity of 1,600 Kw that would partially satisfy the thermal and electrical demands of BOEHRINGER INGELHEIM PROMECO. [Espanol] El presente articulo presenta los resultados de factibilidad que se realizo en Boehringer Ingelheim Promeco para determinar los beneficios que podria rendir un sistema de cogeneracion al satisfacer las demandas energeticas de su planta actualmente en ampliacion. Los resultados mostraron que de acuerdo al modo de operacion de la planta ya ampliada, los beneficios mas altos se obtendrian de un sistema de cogeneracion con capacidad de 1,600 kW que satisfaria parcialmente las demandas termicas y electricas de Boehringer Ingelheim Promeco.

Electric power conservation while using pumping systems; Conservacion de Energia Electrica en Sistemas de Bombeo

Energy Technology Data Exchange (ETDEWEB)

Nambiar, P

2007-01-15

The pumping systems provide about 20 to 25 percent of energy which is necessary worldwide: it is fruitful to understand how to use electric power efficiently, to achieve the reduction regarding expenses a pumping system implies.It is essential to possess a better knowledge about the pumping system and its applications, in order to be able to use energy responsibly. If people do not how to operate this kind of systems properly, they will use inadequate equipment that will cause an energy waste. In addition it is important to know: alternative methods to meet variable demands, an adapted system to pump water requirements in order to ensure the pump work in its pumping point, and the life cycle system cost for the energy saving in the long term. [Spanish] En promedio del 20 al 25% de la energia necesaria en el mundo proviene de los sistemas de bombeo, por tal razon es importante saber como utilizar la energia electrica con eficiencia para asi lograr reducir los gastos que este tipo de sistemas implican. Para poder hacer un buen uso de la energia, es necesario que se tenga un conocimiento mayor del sistema de bombeo y aplicacion, ya que la ignorancia sobre esto exige el uso de aparatos que contribuyen al desperdicio de la energia; por otro lado tambien es esencial conocer metodos alternos para demandas variables, tener un sistema que se adapte a las necesidades de bombeo del agua para asegurarse de que cada bomba trabaje cerca de su punto de bombeo y finalmente conocer el costo del ciclo de vida del sistema para el ahorro de energia a largo plazo.

Supervisory fussy control for an electric generating hybrid system; Control supervisorio difuso para un sistema hibrido de generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Lagunas Mendoza, Javier

2004-11-15

the fuzzy supervisory controller were compared with a conventional controller. The results shows that the supervisory controller fulfills the three main objectives of the system operation: I) to reduce the fuel consumption of the back-up system, II) to reduce the depth of the discharge of the battery bank, and III) to keep fully charged the battery bank as much as possible in order to make a better use of the available free renewable energy sources. [Spanish] En este trabajo se presenta el desarrollo de un controlador supervisorio difuso para un sistema hibrido de generacion electrica (SHGE). En este trabajo se definio la configuracion y los elementos que componen el SHGE a utilizar, producto de la revision de configuraciones de sistemas hibridos propuestas actualmente. La configuracion del SHGE incluye: arreglos fotovoltaicos y aerogeneradores como fuentes de generacion renovable, una maquina de combustion interna como sistema de respaldo, un banco de baterias como medio de almacenamiento de energia, cargas electricas en corriente alterna y un inversor CD/CA para poder alimentarlas. Tambien a partir de la configuracion propuesta se buscaron y seleccionaron los modelos matematicos de los diferentes elementos del sistema. Se llevo a cabo la validacion de los modelos a traves de la comparacion de la salida contra datos reales obtenidos en un SHGE instalado en Pachuca. Con los modelos se llevo a cabo el desarrollo de un programa de simulacion para un SHGE en Matlab. Se determino la funcion principal del controlador supervisorio dentro del SHGE. La funcion es satisfacer el o los objetivos de operacion del sistema. La filosofia de operacion del controlador supervisorio se definio a partir de la configuracion electrica propuesta y de los objetivos de operacion del sistema. Por lo que respecta al desarrollo del controlador supervisorio, se llevo a cabo una revision de los controladores supervisorios actuales que utilizan alguna tecnica de control inteligente. A partir de

The Mexican electric industry under an opening triangle; La industria electrica mexicana bajo un triangulo de apertura

Energy Technology Data Exchange (ETDEWEB)

Suarez Guevara, Sergio [Instituto de Investigaciones Economicas, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

This document analyzes the electric industry in Mexico in its opening phase, which must be qualified as a strategic activity within the present and future becoming of the Mexican economy. The Mexican electric sector was framed within the National Project born out in the country`s Politic Constitution; where the State economic intervention is driven and induced, with its exclusive duty in strategic activities through public enterprises created for that purpose and as a support of Mexico`s economic and social welfare. Within the opening it should be pointed out the participation of the North American Free Trade Agreement (NAFTA), the Energy Program, the Development Program and Restructure of the Energy Sector 1995-2000 [Espanol] En el presente documento se analiza la industria electrica en Mexico en su fase de apertura, la cual debe calificarse como una actividad estrategica dentro del devenir presente y futuro de la economia mexicana. El sector electrico mexicano se enmarco dentro del Proyecto Nacional que nace en la Constitucion Politica del pais; donde se impulsa e induce la intervencion economica del Estado, con su quehacer exclusivo en actividades estrategicas, por medio de empresas publicas creadas para tal fin y en apoyo del bienestar economico y social de Mexico. Dentro de la apertura hay que senalar la participacion que tiene el Tratado de Libre Comercio, el Programa de Energia y el Programa de Desarrollo y Reestructuracion del Sector Energia 1995-2000

Procedures to enter the international market of the carbon and PEMEX electrical generation projects; Procedimientos para ingresar al mercado internacional del carbono y proyectos de generacion electrica de PEMEX

Energy Technology Data Exchange (ETDEWEB)

Zeferino Abundis, Yolanda [Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2006-11-15

The consumption and production of the electrical energy contribute to the gas emission that has the property of retaining heat in the atmosphere, giving rise to an increment in the global average temperature of the Earth, and causing a climatic change that the international scientific consensus describes as important alterations in the meteorological patterns. As a result of this, international actions were taken. The most ambitious agreement and by its quantified and obligatory character is presented the Kyoto Protocol, that forces the countries listed in Annex 1 to reduce their emissions through national measures and flexible mechanisms, within these last ones is the Clean Development Mechanism (CDM) that contemplates the mutual cooperation between developed and developing countries in the participation of projects tending to the reduction of gas emissions of greenhouse effect. Petroleos Mexicanos (PEMEX) has large necessities of electrical energy and steam, and counts on projects with characteristics that under the CDM cover the characteristics to be technical and economically viable. [Spanish] El consumo y produccion de la energia electrica contribuye a la emision de gases que tienen la propiedad de retener calor en la atmosfera, dando lugar a un incremento en la temperatura promedio global de la Tierra, y provocando un cambio climatico que el consenso cientifico internacional describe como alteraciones importantes en los patrones meteorologicos. A raiz de esto, se tomaron acciones internacionales. El acuerdo mas ambicioso y por su caracter cuantificado y obligatorio lo representa el Protocolo de Kyoto, quien obliga a los paises listados en el Anexo 1 a reducir sus emisiones a traves de medidas nacionales y mecanismos flexibles, dentro de estos ultimos se encuentra el Mecanismo de Desarrollo Limpio (MDL) que contempla la cooperacion mutua entre paises desarrollados y en vias de desarrollo en la participacion de proyectos tendientes a la reduccion de emisiones

Auto generation plant of Artigas landfill (Bilbao, Spain); Planta de autogeneracion electrica del vertedero de Artigas (Bilbao)

Energy Technology Data Exchange (ETDEWEB)

Carreras, N.; Dorronsoro, J.L.

1996-07-01

The disposition of MSW in the landfill generates a mixture of gases or {sup b}iogas{sup ,} its primary content is methane (50-60%) which has a very important energetic value, that can be very useful. In this sense, the present work point out the characteristics of the auto generation electrical plant of Artigas landfill, just like the results of the analytical study of the past two years. In this project which was partly funded by the UE, have participated Excmo. Ayuntamiento de Bilbao, EVE and CIEMAT. (Author) 6 refs.

Starting of the steam generator of a fossil fuel power plant, using predictive control based in a neuronal model; Arranque del generador de vapor de una central termoelectrica, usando control predictivo basado en un modelo neuronal

Energy Technology Data Exchange (ETDEWEB)

Gallardo Dominguez, Tonatiuh

2004-09-15

In this thesis work it is presented the design and implementation of a simulator of total scope of a predictive controller based in the neuronal model of the temperature in two stages of the heating of the steam generator of a fossil fuel power plant. An implemented control scheme is detailed, as well as the methodology for the identification of a neuronal model utilized for the control. Finally the results of the implementation in the simulator located at the Instituto de Investigaciones Electricas (IIE) are shown to be satisfactory. This control structure is not applied directly in closed circuit, but provides the value of the control actions to a human operator. [Spanish] En este trabajo de tesis se presenta el diseno e implementacion, en un simulador de alcance total, de un controlador predictivo basado en un modelo neuronal para el control de la temperatura en dos etapas del calentamiento del generador de vapor de una central termoelectrica. Se detalla el esquema de control implementado, asi como la metodologia de identificacion de un modelo neuronal utilizado para la sintesis del control. Finalmente se muestran los resultados de la implementacion en el simulador que se encuentra en el Instituto de Investigaciones Electricas (IIE); dichos resultados fueron satisfactorios. Esta estructura de control no se aplica directamente en lazo cerrado, sino que provee el valor de las acciones de control a un operador humano.

Fractal analysis of the electrical discharges' surface paths in polymeric insulation considering different pollution levels; Analisis fractal de las trayectorias de descargas electricas superficiales en aislamiento polimerico considerando diferentes niveles de contaminacion

Energy Technology Data Exchange (ETDEWEB)

Palacios Lopez, Arturo

2002-07-01

In this thesis tree patterns of superficial breakdown in polymeric insulator of Silicon Rubber are generated. Experimental arrangement rod-rod was used on the basis of norm ASTM D 2303-85. Pollution levels on the basis of norm IEC 507 were also used. The experimental values of Fractal Dimension for each case of pollution were reported. A self similar method called Box Counting for the fractal dimension calculus and for the self affine methods an R/S and Variogram were used. According to the results, it was concluded that the tree patterns of superficial electric breakdown in Silicon Rubber is self similar and its value does not depend on the degree of pollution, that is equivalent to the concentration of salt for liter of water or to the Equivalent Salt Deposition (ESDD), in the surface of an insulator. [Spanish] En el presente trabajo se inducen descargas electricas superficiales en un aislamiento polimerico de Hule Silicon, el arreglo experimental que se utilice es punta-punta con base en la norma ASTM D 2303-85 y los niveles de contaminacion con base en la norma IEC 507. Se reportan los valores experimentales de la Dimension Fractal para cada caso de contaminacion, se utilice el metodo auto similar de conteo de cuadros, para el calculo de la Dimension Fractal y para metodos auto afines se utilice analisis R/S y variograma. Con los resultados obtenidos se concluye que la trayectoria de la descarga electrica superficial en un polimero de Hule Silicon es auto similar y su valor no depende del grado de contaminacion, el cual es equivalente a la concentracion de gramos de sal por litro de agua o a la densidad de sal depositada (DESD), en la superficie de un aislador.

Homogeneous grouping of residential users of electric power in accordance with the variables that affect the consumption; Agrupamientos homogeneos de usuarios residenciales de energia electrica en funcion de las variables que impactan el consumo

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E.; Romero Cortes, J. [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

This paper presents the results of the correlation analysis of the monthly consumption of electric power and the capacities in watts of the electric household appliances and domestic lighting performed in a sample of users of the residential tariff. To carry out this task, the information obtained in the answers to the inquiry applied to a group of dwellings, was used (the results of the inquiry are presented in another paper of this Seminar). The correlation variables were obtained from the nominal capacities or through the actual measurements of the energy consumption of the electric household appliances similar to the ones found in the visited homes. At the end of this paper the result of the application of the cluster analysis technic to obtain homogeneous groups of users, is presented, so as to be in position of estimating the shape of the hourly demand curve by means of the recording of the demand (watts) of a small sample of users. [Espanol] En este articulo se presenta el resultado de correlacion del consumo mensual de energia electrica y las capacidades en watts de los electrodomesticos e iluminacion realizado a una muestra de usuarios de tarifa residencial. Para este trabajo se utilizo la informacion obtenida en las respuestas de una encuesta aplicada en un conjunto habitacional (los resultados de la encuesta se presentan en otro articulo en este Seminario). Las variables de la correlacion se obtuvieron a partir de las especificaciones de capacidades o a traves de mediciones en electrodomesticos similares a los encontrados en los hogares. Al final se presenta el resultado de la aplicacion de la tecnica de formacion de agrupamientos `Cluster Analysis` para obtener grupos homogeneos de usuarios, de forma que se pueda estimar el perfil de demanda electrica mediante el registro de la demanda (watts) de una pequena muestra de usuarios.

Homogeneous grouping of residential users of electric power in accordance with the variables that affect the consumption; Agrupamientos homogeneos de usuarios residenciales de energia electrica en funcion de las variables que impactan el consumo

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E; Romero Cortes, J [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1998-12-31

This paper presents the results of the correlation analysis of the monthly consumption of electric power and the capacities in watts of the electric household appliances and domestic lighting performed in a sample of users of the residential tariff. To carry out this task, the information obtained in the answers to the inquiry applied to a group of dwellings, was used (the results of the inquiry are presented in another paper of this Seminar). The correlation variables were obtained from the nominal capacities or through the actual measurements of the energy consumption of the electric household appliances similar to the ones found in the visited homes. At the end of this paper the result of the application of the cluster analysis technic to obtain homogeneous groups of users, is presented, so as to be in position of estimating the shape of the hourly demand curve by means of the recording of the demand (watts) of a small sample of users. [Espanol] En este articulo se presenta el resultado de correlacion del consumo mensual de energia electrica y las capacidades en watts de los electrodomesticos e iluminacion realizado a una muestra de usuarios de tarifa residencial. Para este trabajo se utilizo la informacion obtenida en las respuestas de una encuesta aplicada en un conjunto habitacional (los resultados de la encuesta se presentan en otro articulo en este Seminario). Las variables de la correlacion se obtuvieron a partir de las especificaciones de capacidades o a traves de mediciones en electrodomesticos similares a los encontrados en los hogares. Al final se presenta el resultado de la aplicacion de la tecnica de formacion de agrupamientos `Cluster Analysis` para obtener grupos homogeneos de usuarios, de forma que se pueda estimar el perfil de demanda electrica mediante el registro de la demanda (watts) de una pequena muestra de usuarios.

The PBMR electric power generation plant; La planta de generacion de energia electrica PBMR

Energy Technology Data Exchange (ETDEWEB)

Perez S, G.; Santacruz I, I.; Martin del Campo M, C. [FI-UNAM, 04500 Mexico D.F. (Mexico)] e-mail: gabriela_perez@engineer.com

2003-07-01

This work has as purpose to diffuse in a general way the technology of the one modulate reactor of pebble bed. Because our country is in developing ways, the electric power demand goes in increase with that which it is presented the great challenge of satisfying this necessity, not only being in charge of the one fact per se, but also involving the environmental aspect and of security. Both factors are covered by the PBMR technology, which we approach in their basic aspects with the purpose that the public opinion knows it and was familiarized with this type of reactors that well could represent a solution for our growing electricity demand. We will treat this reactor visualizing it like part of a generation plant defining in first place to the itself reactor. We will see because that the system PBMR consists of 2 main sections: the reactor and the unit of energy conversion, highlighting that the principle of the PBMR reactor operation is based on the thermodynamic Brayton cycle cooled by helium and that, in turn, it transmits the energy in form of heat toward a gas turbine. In what concerns to the fuel, it peculiar design due to its spherical geometry is described, aspect that make to this reactor different from the traditional ones that use fuel rods. In fact in the fuel spheres of the PBMR it is where it resides great part of it inherent security since each particle of fuel, consistent in uranium dioxide, is lined one with coal and silicon carbide those which form an impenetrable barrier containing to the fuel and those radioactive products that result of the nuclear reactions. Such particles are encapsulated in graphite to form the sphere or 'pebble', of here born the name of this innovative technology. (Author)

Gas turbine application in power plants of Mexican refineries; Aplicacion de turbinas de gas en plantas de fuerza de refinerias mexicanas

Energy Technology Data Exchange (ETDEWEB)

Alcaraz Calderon, A. M.; Rodriguez Martinez, H.; Garcia Paredes, Job; Morales Guillen, Magdalena; Manzanares Papayanapolous, Emilio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: malcaraz@iie.org.mx; jhrm@iie.org.mx; jgarcia@iie.org.mx; mmmg@iie.org.mx; emp@iie.org.mx

2010-11-15

This article presents an overview of the application to have the gas turbine power generation systems, electric and steam for Mexican refineries. First there is a general description of the gas turbines and heat recovery (system components CHP) and CHP schemes are based on gas turbines capable of use in Mexican refineries. Subsequently referred to the characteristics of energy consumption (steam and electricity) from Mexican refineries and performs a technical analysis of CHP schemes based on gas turbines from the point of view of rates Q/W, power efficiencies and combined concluded that by their nature are very useful for refinery and gives some recommendations for improved implementation. [Spanish] En este articulo se presenta una vision general de la aplicacion que tienen las turbinas de gas en sistemas de generacion de energia electrica y vapor para refinerias mexicanas. Primeramente se da una descripcion general de las turbinas de gas y recuperadores de calor (componentes principales del sistema de cogeneracion) y se muestran los esquemas de cogeneracion basados en turbinas de gas susceptibles de utilizar en refinerias mexicanas. Posteriormente se mencionan las caracteristicas de consumos energeticos (vapor y energia electrica) de las refinerias mexicanas y se realiza un analisis tecnico de los esquemas de cogeneracion basado en turbinas de gas desde el punto de vista de tasas Q/W, eficiencias electricas y combinadas, concluyendose que por sus caracteristicas son muy utiles para refinerias y se dan algunas recomendaciones para su mejor aplicacion.

Development and implementation of a pilot network for continuous monitoring of electric energy; Desarrollo e implantacion de una red piloto de monitoreo continuo de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Sanchez Cifuentes, A.; Cortes Eslava, A. [Facultad de Ingenieria, UNAM, Mexico, D. F. (Mexico)

1997-12-31

The ``Programa Universitario de Energia (PUE)`` (University Energy Program) of the Universidad Nacional Autonoma de Mexico (UNAM) through the project ``Ecologic Control of The University Campus`` has the objective of instrumenting policies for the rational use of the electric energy in the UNAM installations. The PUE has performed a series of activities aimed at the establishment of an integral program for the electric energy management in the UNAM. This program has to consider the measures for energy saving (MES) of general kind and to promote a series of specific measures to be adequated and implemented for each one of the departments. The success in establishing a series of MES compels to quantify its effects, to register and to analyze them to be in position of enhancing them, since it must be kept in mind that something that can not be measured can not be improved. For this purpose the PUE is developing a continuous monitoring pilot network of electric energy with local and remote access and an automated metering system. Two monitoring schemes are experimented, one commercial metering equipment and another one with own metering technology. In this paper the characteristics of the proposed monitoring schemes are described. [Espanol] El Programa Universitario de Energia (PUE) de la Universidad Nacional Autonoma de Mexico (UNAM), a traves del proyecto {sup C}ontrol Ecologico del Campus Universitario{sup ,} tiene como objetivo instrumentar politicas de uso racional de la energia en las instalaciones universitarias. El PUE ha realizado una serie de actividades encaminadas a establecer un programa integral de administracion de la energia electrica en la UNAM. El programa mencionado debe considerar medidas de ahorro de energia (MAE) de tipo general y promover una serie de medidas particulares, para ser adecuadas e implantadas por cada una de las dependencias. El exito en el establecimiento de una serie de MAE, obliga a cuantificar sus efectos, registrarse y

Development and implementation of a pilot network for continuous monitoring of electric energy; Desarrollo e implantacion de una red piloto de monitoreo continuo de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Sanchez Cifuentes, A; Cortes Eslava, A [Facultad de Ingenieria, UNAM, Mexico, D. F. (Mexico)

1998-12-31

The ``Programa Universitario de Energia (PUE)`` (University Energy Program) of the Universidad Nacional Autonoma de Mexico (UNAM) through the project ``Ecologic Control of The University Campus`` has the objective of instrumenting policies for the rational use of the electric energy in the UNAM installations. The PUE has performed a series of activities aimed at the establishment of an integral program for the electric energy management in the UNAM. This program has to consider the measures for energy saving (MES) of general kind and to promote a series of specific measures to be adequated and implemented for each one of the departments. The success in establishing a series of MES compels to quantify its effects, to register and to analyze them to be in position of enhancing them, since it must be kept in mind that something that can not be measured can not be improved. For this purpose the PUE is developing a continuous monitoring pilot network of electric energy with local and remote access and an automated metering system. Two monitoring schemes are experimented, one commercial metering equipment and another one with own metering technology. In this paper the characteristics of the proposed monitoring schemes are described. [Espanol] El Programa Universitario de Energia (PUE) de la Universidad Nacional Autonoma de Mexico (UNAM), a traves del proyecto {sup C}ontrol Ecologico del Campus Universitario{sup ,} tiene como objetivo instrumentar politicas de uso racional de la energia en las instalaciones universitarias. El PUE ha realizado una serie de actividades encaminadas a establecer un programa integral de administracion de la energia electrica en la UNAM. El programa mencionado debe considerar medidas de ahorro de energia (MAE) de tipo general y promover una serie de medidas particulares, para ser adecuadas e implantadas por cada una de las dependencias. El exito en el establecimiento de una serie de MAE, obliga a cuantificar sus efectos, registrarse y

Projects of electrical energy saving in Costa Rica; Proyectos de ahorro de energia electrica en Costa Rica

Energy Technology Data Exchange (ETDEWEB)

Chinchilla, Henry [Compania Nacional de Luz y Fuerza, S.A., San Jose (Costa Rica)

1999-07-01

un adecuado aporte hacia la competitividad industrial, confort humano y proteccion del medio.

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

Research activities in the use of energy; Actividades de investigacion en el uso de la energia electrica

Energy Technology Data Exchange (ETDEWEB)

Covarrubias Ramos, Rogelio; Garcia Juarez, Francisco [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The use of energy is intimately related to the development and is found in the human activities of all types, consequently we could say that to a greater usage it must correspond a greater benefit. This paper carries on a comparative analysis of the Mexico`s energy efficiency versus industrialized countries; this analysis shows that while Mexico indicates a growing tendency, in the industrialized countries the tendency is to the drop, unmistakable sign of a better usage of the energy sources. It also makes evident that promoting the energy efficiency in Mexico will stimulate and regulate the energy conservation at National level, in the same way it is mentioned that an appropriate energy demand Management for the users as well as for the service providers, will diminish the peak demand, the adequate application of the electric rates at the actual conditions and the energy saving and the strategic load growth [Espanol] El uso de la energia esta intimamente relacionado con el desarrollo y se encuentra en las actividades humanas de todo tipo, de tal suerte que podriamos decir que a mayor uso debe corresponder un mayor beneficio. En este documento se realiza un analisis comparativo de la eficiencia energetica en Mexico contra paises industrializados; este analisis muestra que mientras Mexico indica una tendencia creciente, en los paises industrializados la tendencia es a la baja, signo inequivoco de un mejor uso de los energeticos, tambien hace ver que la promocion de la eficiencia energetica en Mexico estimulara y regulara el ahorro de energia a nivel nacional, de igual manera se menciona que una buena administracion de la demanda energetica tanto por los usuarios como los que prestan el servicio, reducira la demanda pico, la adecuacion de las tarifas electricas a las condiciones reales y el ahorro de los energeticos y el crecimiento estrategico de la carga

Calculation of the electromagnetic fields in electric machines through the use of the finite element. Algorithms for the solution of induction problems. Pt. 3; Calculo de campos electromagneticos en maquinas electricas mediante elemento finito. Algoritmos para la solucion de problemas de induccion. Pt. 3

Energy Technology Data Exchange (ETDEWEB)

Rosales, Mario F [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

This article is based in the electromagnetic modeling presented in the first part of the series for the indirect solution of partial differential equations. Magnetic systems in closed regions with moving or axial symmetry, whose total current density is partially known (induction problems) are considered. Includes the ability to deal with means in movement and a sinusoidal behavior for the source density current is assumed. Some algorithms are developed that are implanted in the software CALIIE-2D of the Instituto de Investigaciones Electricas (IIE) to obtain the numerical solutions of these problems. The basic systems of algebraic equations are obtained through the application of the Galerkin method in the discreteness of the finite element with first order triangular elements. [Espanol] Este articulo se basa en la modelacion electromagnetica presentada en la primera parte de la serie y en el planteamiento proporcionado en la segunda parte para la solucion indirecta de ecuaciones diferenciales parciales. Se consideran sistemas magneticos en regiones cerradas con simetria traslacional o axial, cuya densidad de corriente total es parcialmente conocida (problemas de induccion). Incluye la capacidad para tratar medios con movimiento y se supone un comportamiento senoidal para la densidad de corriente fuente. Se desarrollan los algoritmos que se implantan en el programa de computo CALIIE-2D del Instituto de Investigaciones Electricas (IIE) para obtener las soluciones numericas de estos problemas. Los sistemas basicos de ecuaciones algebraicas se obtienen mediante la aplicacion del metodo de Galerkin en la discretizacion de elemento finito con elementos triangulares de primer orden.

Predictive analysis on the electric energy distribution systems reliability: applying the synerGEE system; Analisis predictivo de la confiabilidad en los sistemas de distribucion de energia electrica: aplicando el sistema synerGEE

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Andrade, Carlos

2008-12-15

Electrical distribution systems ought to deliver electric power as economical as possible with an acceptable degree of service quality and continuity. Nevertheless, their faults represent one of the main causes of customer's unavailability. At the moment, a wide range of determinist criteria in the improvement of systems reliability based on past behavior are used, but they do not respond to the stochastic nature of system behavior, and are applied without an adequate balance between reliability and economy. In order to obtain this balance a minimum cost planning methodology that considers the predictive analysis of different investment alternatives in addition to the past behavior of the system is required, which guarantees that the economic resource available and limited will be used to gather the greater possible reliability degree. In this work this problem is approached with the fundamentals and methodologies needed to assess the design effects and operative criteria over the main reliability indexes used by the main utilities around the world, with emphasis on the need to optimize economical resources. The use of the system SynerGEETM, is investigated, probing it as a useful tool for the predictive reliability analysis. Due to the lack of experience that exists in Mexico with this type of analysis, distribution engineers has to become familiar with the concepts of the reliability engineering, their application to establish distribution systems models, and acquiring the ability to use the modern simulation tools, allowing them to evaluate the behavior of these systems with enough analytical rigor. In this sense a serial of well known study cases are presented to help them in this labor. [Spanish] Los sistemas de distribucion de energia electrica deben satisfacer la demanda de energia electrica de la forma mas economica posible, con un grado de calidad y continuidad aceptable. Sin embargo, sus fallas son una de las principales causas de indisponibilidad en

EP 1000 -The European Passive Plant

International Nuclear Information System (INIS)

Cummins, Ed; Oyarzabal, Mariano; Saiu, Gianfranco

1998-01-01

A group of European utilities, along with Westinghouse and its industrial partner GENESI (an Italian consortium including ANSALDO and FIAT) initiated a program to evaluate Westinghouse passive nuclear plant technology for application in Europe. The European utility group consisted of: Agrupacion electrica para al Desarrollo Technologico Nuclear (DTN), Spain; Electricite de France; ENEL, SpA., Italy; IVO Power Engineering, Ltd., Finland; Scottish Nuclear Limited (acting for itself on behalf of Nuclear Electric plc, U.K.; Tractebel Energy Engineering, Belgium; UAK (represented by NOK-Beznau), Switzerland; and Vattenfall AB, Ringhals, Sweden. The European Passive Plant (EPP) program, which began in 1994, is an evaluation of the Westinghouse 600 MWe AP 600 and 1000 MWe Simplified Pressurized Water Reactor (SPWR) designs in meeting the European Utility Requirements (EUR), and where necessary, modifying the design to achieve compliance. Phase 1 or the EPP program was completed and included the two major tasks of evaluating the effect of the EUR on the Westinghouse nuclear island and developing the EP 1000, a 1000 MWe passive plant reference design that conforms to the EUR and would be licensable in Europe. The EP 1000 closely follows the Westinghouse SPWR design for safety systems and containment and the AP 600 design for auxiliary systems. It also includes features that where required to meet the EUR and key European licensing requirements. The primary circuit of the EP 1000 retains most of the general features of the current-day designs, but some evolutionary features to enhance reliability, simplicity of operation, ease of maintenance, and plant safety have been incorporated into the design. The core, reactor vessel, and reactor internals of the EP 1000 are similar to those of currently operating Westinghouse PWR plants, but several new features are included to enhance the performance characteristics. The basic EP 1000 safety philosophy is based on use of inherent

Upgrading of operation and maintenance. Lessons learned by ENEL- Nuclear Plant Management

International Nuclear Information System (INIS)

Bolla, Giuseppe; Panini, Giulio

1999-01-01

A presentation and general information on ENEL are given. The Italian Authority for Electric Energy (Ente Nazionale per l'Energia Electrica - ENEL), entirely owned by the Italian Ministry of Treasury, is the third largest utility in the world after EDF of France and TEPCO of Japan. The following figures are featuring its size: - Net maximum capacity = 52.463 GW; - Power generation = 182,500 GW h; - Customer = 28.2 Million; - Hydroelectric power plants = 651 (16.327 MW); - Thermoelectric power units = 206 (35,666 MW); - Geothermal power units = 36 (470 MW). The ENEL core business consists of generation, transmission, distribution and sale throughout Italy of electric power produced from any source as well as the importation and exportation of electric power and the co-ordination of operational and planning activities in order to ensure adequate availability throughout Italian territory of electric power at minimum cost. Before the decision taken for political reason by Italian Government in 1988 to terminate nuclear power plants operation and construction, 4 NPPs have been successfully operated. The whole production of the four plants has been about 90 billion kWh. The management experience for these plants has been good, both for plant availability and safety. No operating events occurred arising any risk for workers, population and environment. The Chernobyl power plant accident induced Italy to promote the 'nuclear referendum' in November 1987. Following the referendum the nuclear power production was interrupted. After 1988 the following nuclear activities has been carried out: - plant safe conservation, decommissioning planning, cost evaluation and safe enclosure preparation; - investigation for waste treatment methods; - participation in requirement definition and design activity for next NPP generation. A specific experience has been accumulated in the decommissioning of Italian NPPs, due to their anticipated shutdown, in particular in the field of

Probabilistic fracture mechanics in the integrity evaluation of components; Mecanica de fractura probabilista en la evaluacion de la integridad de componentes

Energy Technology Data Exchange (ETDEWEB)

Franco Nava, Jose Manuel; Torres Toledano, Jose Gerardo; Sanchez Sanchez, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

Because of the importance of fracture mechanics in applications to pressure vessels, piping and other components used in thermal power plants, the Mechanical Engineering Unit of the Instituto de Investigaciones Electricas (IIE) has been developing activities in this field since some years ago. In this paper, the process for the analysis of probabilistic fracture mechanics is described. As an example, an application to the calculation of fault probability in piping systems, is presented. [Espanol] Dada la importancia de la mecanica de fractura en aplicaciones de recipientes a presion, tuberias y otros componentes utilizados en centrales termicas, la Unidad de Ingenieria Mecanica del Instituto de Investigaciones Electricas (IIE) ha venido desarrollando actividades en este campo desde hace algunos anos. En el presente trabajo, se describe el proceso para el analisis de mecanica de fractura probabilista. Como ejemplo se presenta una aplicacion al calculo de probabilidad de falla en tuberias.

Probabilistic fracture mechanics in the integrity evaluation of components; Mecanica de fractura probabilista en la evaluacion de la integridad de componentes

Energy Technology Data Exchange (ETDEWEB)

Franco Nava, Jose Manuel; Torres Toledano, Jose Gerardo; Sanchez Sanchez, Ramon [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

Because of the importance of fracture mechanics in applications to pressure vessels, piping and other components used in thermal power plants, the Mechanical Engineering Unit of the Instituto de Investigaciones Electricas (IIE) has been developing activities in this field since some years ago. In this paper, the process for the analysis of probabilistic fracture mechanics is described. As an example, an application to the calculation of fault probability in piping systems, is presented. [Espanol] Dada la importancia de la mecanica de fractura en aplicaciones de recipientes a presion, tuberias y otros componentes utilizados en centrales termicas, la Unidad de Ingenieria Mecanica del Instituto de Investigaciones Electricas (IIE) ha venido desarrollando actividades en este campo desde hace algunos anos. En el presente trabajo, se describe el proceso para el analisis de mecanica de fractura probabilista. Como ejemplo se presenta una aplicacion al calculo de probabilidad de falla en tuberias.

Red Electrica de Espana S.A.. Instrument of regulation and liberalization of the Spanish electricity market (1944-2004)

International Nuclear Information System (INIS)

Garrues-Irurzun, Josean; Lopez-Garcia, Santiago

2009-01-01

To understand the regulation system of the Spanish electricity market it is first necessary to understand on the one hand the system of tariffs and prices, and on the other the organization of the market for high voltage distribution. This article is concerned with this second aspect and traces its history from 1944, this is because before that date it was not possible to speak of a truly national market, but rather only of regional monopolies. In the 1940s, with Franco's new political regime, and the development of the Spanish electricity sector, it became necessary to completely rethink business strategies in relation to competition and cooperation, as well as the regulatory function of the state. In the 1950s, the main feature of the sector was the system of business self-regulation permitted by the state. Throughout the remaining years of Franco's government state intervention was particularly focussed on the subject of tariffs, but with the onset of democracy the state was to involve itself in the transmission network as well. A debate began as to whether it should be run by a private or public operator. In this dispute were ranged, on the one hand, the economic policy concepts of the major parties (PSOE and PP), and against them the strategic interests of the companies. Although the high voltage transmission network was nationalized by the state in the mid-1980s, establishing a 'traditional' model of regulation, the 1990s saw the triumph of a market-based regulation, strongly influenced by the dominant ideas in the European Union, which has converted Red Electrica into a private company. Currently the TSO (Transmission System Operators) model has been extended to Portugal and has entered into competition-cooperation with the other models of the European electricity market. (author)

Questions to the radiological protection in the Universidad Nacional Autonoma de Mexico; Cuestionamientos a la proteccion radiologica en la Universidad Nacional Autonoma de Mexico

Energy Technology Data Exchange (ETDEWEB)

Salas M, B., E-mail: salasmarb@yahoo.com.mx [UNAM, Facultad de Ciencias, Departamento de Fisica, Circuito exterior s/n, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

2014-08-15

In the Physics Department of the Sciences Faculty of the Universidad Nacional Autonoma de Mexico (UNAM) exist at least 3 sites where radioactive sources and generating equipment s of ionizing radiation are managed: The Modern Physics Laboratory, the Radiological Analysis of Environmental Samples Workshop and the Collisions Workshop; the first of them has two neutron sources, in addition to other emitted sources of gamma and beta radiation. The neutron sources are of Americium 241-Beryllium and other of Californium-252 which have been operated outside of the control of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) that is the regulator organ in Mexico in nuclear matter, because the Operation License No. 183/85, with file number 657 that protected them, lost their validity from August 13, 1987 (25 years behind), what motivated to that the CNSNS assured them. Later to the closing of the Radiological Analysis of Environmental Samples Workshop was believed that a Barium-133 source had been extracted in an illegal way; an investigation realized by the CNSNS determined that the radioactive source was always inside of the detection systems and radiation measurement, for what this source was never lost. In the Collisions Workshop operated an Experimental Accelerator of Particles that the CNSNS prohibited its operation for not having the corresponding license. These examples can be considered as bad practices of radiological protection that should be pointed out to eradicate their promotion and to avoid this way the exposure to the radiation of the occupational exposed personnel and people in general, being also avoided dose of unnecessary radiation. The Instituto Federal de Acceso a la Informacion Publica y Proteccion de Datos (IFAI) in Mexico was a key factor to obtain the information that allowed the realization of this work that was carried out in the Sciences Faculty of the UNAM. (Author)

Criteria for the provision and assembly of the rotor blades of a 300 MW low pressure steam turbine for electrical generation; Criterios para el suministro y ensambles de la alabes de rotor de turbina de vapor de 300 MW baja presion para generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Bertin, Galo; Felix, Jorge A; Quijano, Octavio [Especialistas en Turbopartes, S.A. de C.V., Queretaro, Queretaro (Mexico)

2007-11-15

This paper presents some of the main criteria to consider from the inspection, disassembling and assembly of blades with different root types of a turbine rotor of steam turbines for power generation, having as an aim to count on a reliable rotor, fulfilling with the equipment original design and norms and international standards. [Spanish] Este trabajo presenta algunos de los criterios principales a considerar desde la inspeccion, desmontaje y montaje de alabes de diferentes tipos de raiz de un rotor de turbinas de vapor de generacion electrica, teniendo como finalidad contar con un rotor confiable, cumpliendo con el diseno original del equipo y con normas y estandares internacionales.

Questions to the reactors power upgrade of the Nuclear Power Plant of Laguna Verde; Cuestionamientos al aumento de potencia de los reactores de la Central Nuclear de Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Salas M, B., E-mail: salasmarb@yahoo.com.mx [UNAM, Facultad de Ciencias, Departamento de Fisica, Circuito exterior s/n, Ciudad Universitaria, 04510 Mexico D. F. (Mexico)

2014-08-15

The two reactors of the Nuclear Power Plant of Laguna Verde (NPP-L V) were subjected to power upgrade labors with the purpose of achieving 20% upgrade on the original power; these labors concluded in August 24, 2010 for the Reactor 1 and in January 16, 2011 for the Reactor 2, however in January of 2014, the NNP-L V has not received by part of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) the new Operation License to be able to work with the new power, because it does not fulfill all the necessary requirements of safety. In this work is presented and analyzed the information obtained in this respect, with data provided by the Instituto Federal de Acceso a la Informacion Publica y Proteccion de Datos (IFAI) and the Comision Federal de Electricidad (CFE) in Mexico, as well as the opinion of some workers of the NPP-L V. The Governing Board of the CFE announcement that will give special continuation to the behavior on the operation and reliability of the NPP-L V, because the frequency of not announced interruptions was increased 7 times more in the last three years. (Author)

JPRS Report, Science & Technology, Europe & Latin America, Argentina: Specifications of ARGOS 380 MW Reactor.

Science.gov (United States)

1988-02-18

and economy in operation. ENACE is an acronym for Empresa Nuclear Argentina de Centrales Electricas, or Argentine Nuclear Power Plant Corporation...products. The fuel transport system can be used during full reactor power operation to remove specially de - signed fuel assemblies containing rods for...SPECIFICATIONS OF ARGOS 380 MW REACTOR [Buenos Aires COMISION NACIONAL DE ENERGIA ATOMICA: INFORME in English 1987 pp 1-93] CONTENTS Argentine Offer of

Design and construction of the prototype of a digital meter of single phase electric energy based in a microcontroller; Diseno y construccion del prototipo de un medidor digital de energia electrica monofasico basado en un microcontrolador

Energy Technology Data Exchange (ETDEWEB)

Martinez Alonso, Ruben

2003-10-15

This research work presents the design and construction of a single-phase microcontroller-based digital electric energy meter. The digital instrument displays the energy demand (kw-h) based on up-to-date tariff provided by the Mexican national utility Comision Federal de Electricidad (CFE). The meter digitally processes voltage and current line waveform samples taken at its input, displaying, in real time, the number of electrical parameters calculated. For a better instrument performance a PIC16F874 microcontroller from microchip has been used as computational core. The parameters of interest are visualized in a liquid crystal display of 2 X 16 characters. The user interface includes a menu where some of the parameters can be selected by the operator. In the event of an electric power supply disruption the meter keeps to the energy consumption in memory. The voltage and current measured levels ranges from 1 to 255 Vrms and 0.1 to 25.5 Arms, respectively. The power is displayed in 5 digits ranging from 0 to 6502.5 watts and the energy is displayed with 5 whole digits and 5 decimals ranging, from 0 kWh up to 99999.99999 kWh. These values are refreshed every one second together with the actual electrical consumption cost which ranges from 0 up to 9999.9 pesos. The digital measuring instrument has been built based on four main inter-connected modules named, data acquisition; signal conditioning; signal processing; and display. A set of efficient assembly code routines has been developed in order to calculate the number of electrical parameter previously described. After a debugging process, the optimised code has been assembled for the PIC16F874. [Spanish] El trabajo presenta el diseno y construccion de un medidor digital de energia electrica basado en un microcontrolador, el cual visualiza la demanda por el consumo de kWh, basandose en una tarifa escalonada de tipo domestico de CFE. Tambien el aparato visualiza voltaje, corriente, potencia y el tiempo de medicion

Control voltage of the generator of auto-excited induction for applications on micro/mini generation o electric power; Control de voltaje del generador de induccion auto-excitado para aplicaciones de micro/mini generacion de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Torres Montalvo, Emmanuel

2006-09-15

Although only one part of the mini/micro hydraulic power has been exploited in our country, this type of electric energy generation can be considered as a visible way of electricity generation, mainly related to the ecological, economical and social aspects. The impact that these power plants can have in the regions in which they are installed is always positive: cost energy cost reduction, economical spills and mainly a social welfare. The electric energy is one of the pillars for the economical development of a country and provides a better life quality. Nowadays the research and the technology oriented to the operation and control of the micro/mini power plants has awaken the interest of many researchers in several countries of the world as China, India, Canada, and USA to mention some of them. The induction generator plays a crucial role in the uses of these technologies. The work of Basset and Potter in 1935 is the angular stone over the possibility of generating energy making use of the induction machine and a capacitors bank connected to the machine terminals. This configuration is known as induction auto-excited generator (GIAE). Several investigations have been realized that deal about the functioning principle and the dynamic behavior a GIAE, which can supply electric power in remote isolated regions. In the existing literature have been proposed control strategies to offer voltage regulations and/or frequency into the acceptable range. Some of these control strategies present problems such a demand of a reactive power, harmonics injections in the system, the control circuits are complicated, expensive and voluminous and prone to fail. This paper realizes an analysis of the necessary and sufficient conditions so that an induction machine can operate as GIAE. The corresponding curves are presented for each studied case. The dynamic behavior of the voltage and the frequency generated by the GIAE are studied in detail, which is a contribution to the existing

Results of the Service of External Dosimetry of the Centro de Proteccion e Higiene de las Radiaciones (CPHR), Cuba during the biennium 2010 - 2011; Resultados del servicio de dosimetria externa del CPHR durante el bienio 2010-2011

Energy Technology Data Exchange (ETDEWEB)

Molina Perez, Daniel; Verdecia Sanchez, Maribel; Castro Soler, Ailza; Farrada Neyra, Yamilia, E-mail: daniel@cphr.edu.cu [Laboratorio de Dosimetria Externa (LDE), Centro de Proteccion e Higiene de las Radiaciones (CPHR), La Habana (Cuba)

2013-07-01

The Service of Personal Dosimetry of the External Dosimetry Laboratory of the Centro de Proteccion y Higiene de las Radiaciones - CPHR of Cuba works with an automatic RADOS TLD system and includes the surveillance of the doses of whole body and extremities for photon radiation. The work presents the results of the service in the period 2010-2011, showing data related to the number and distribution of workers monitored for areas. The levels of occupational exposure area analyzed using various indicators such as: annual average dose for areas, number of workers who receive annual doses greater than zero, distribution of workers by dose intervals, and others. These indicators are compared with previous periods and with the values published by the UNSCEAR. In general, the average annual dose for all areas was less than 1 mSv for whole body and 3 mSv for hands. The number of exposed workers experienced significant variation from one year to another, considerably decreasing from 60% to 12% of the total. The work presents an analysis of this behavior and highlights that the country guarantees the personal dosimetry to 100% of exposed workers and that the results of the occupational exposure are within the established requirements.

Electric power saving in the drinkable water, sewage and sanitation system, La Piedad; Ahorro de energia electrica en el sistema de agua potable, alcantarillado y saneamiento de La Piedad

Energy Technology Data Exchange (ETDEWEB)

Sistema de Agua Potable, Alcantarillado y Saneamiento de la Piedad (Mexico). E-mail: sapaslapiedad@prodigy.net.mx

2006-04-15

In Michoacan, Mexico, a project who seeks to benefice the Municipal public resources was crated in 1994. It would be achieved trough the electric power saving in the public lighting system, and drinkable water pumping and black water, since those activities required the budget biggest part. The program could be developed recently and the saving was significant. In addition the electromechanical efficiency increased in the equipment installation. This work is an example for other States to do something similar that can improve their conditions. [Spanish] En el estado de Michoacan, Mexico se creo un proyecto en el ano de 1994, el cual buscaba beneficiar los recursos publicos municipales, a traves del ahorro de la energia electrica en los sistemas de alumbrado publico y bombeo de agua potable y aguas negras, ya que estas actividades son las que requieren la mayor parte del presupuesto. El programa pudo llevarse a cabo en anos recientes y el ahorro fue significativo, ademas de que aumento la eficiencia electromecanica en los equipos que se instalaron, y esta obra ha servido de ejemplo a otros estados para que realicen algo similar que pueda mejorar su situacion.

Energy losses produced by differential currents in the metallic ducts of electric installations; Perdidas de energia producidas por corrientes diferenciales en la tuberia metalica de instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Campero L, Eduardo; Bratu S, Neagu; Marquez M, Luis; Caballero R, Rafael [Universidad Autonoma Metropolitana Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1994-12-31

In this article it is explained what is known as differential currents and the conditions in which they appear in the electrical installations. A short outline is made on the magnetic induction phenomenon that appears in metallic conduits, due to the circulation of differential currents along the inside of the tube and that in turn produces energy losses in the form of heat, that is dissipated in the tube surrounding environment. The results of the measurements performed in the laboratory are shown in order to quantify the energy losses in the metallic conduit. It was found that for certain conditions these losses are significant. [Espanol] En este articulo se explica lo que se entiende por corrientes diferenciales y se describen las condiciones en las que estas aparecen en las instalaciones electricas. Se plantea brevemente el fenomeno de induccion magnetica que aparece en las tuberias metalicas, debido a la circulacion de corrientes diferenciales por el interior del tubo y que a su vez produce perdidas de energia en forma de calor, que se disipa en el ambiente que rodea al tubo. Se muestran los resultados de las mediciones que se llevaron a cabo en laboratorio para poder cuantificar las perdidas en tuberia metalica conduit. Se encontro que para ciertas condiciones estas perdidas son significativas.

Importance of the validation of saving technologies of electric power; Importancia de la validacion de tecnologias ahorradoras de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Valer Negrete, Adrian [Programa de Ahorro de Energia del Sector Electrico (PAESE), Comision Federal de Electricidad (Mexico)

2003-07-01

Within the Programs of Energy Saving it is fundamental the search and application of new technologies, with which this saving can be obtained, selected with base in their technical characteristics that allow to reduce to the consumptions and demands of power, without damaging the electric networks nor the transformers of the Comision Federal de Electricidad. It is important that the investments which are made count on attractive periods of capital recovery, in comparison with the useful life of the product, reason why the knowledge and price of the new technologies will be parameters to consider in an important manner, creating the need of conducting tests that verify the veracity of the information of the supplier, resulting in certain cases, the change of design of these technologies, so that thus they fulfill the engaged characteristics. This paper indicates the characteristics that the new saving technologies of electrical energy must fulfill and the tests and parameters to consider their evaluation. [Spanish] Dentro de los Programas de Ahorro de Energia es fundamental la busqueda y aplicacion de nuevas tecnologias, con las que se pueda obtener dicho ahorro, seleccionadas con base en sus caracteristicas tecnicas que permitan reducir los consumos y demandas de potencia, sin danar las redes ni transformadores de la Comision Federal de Electricidad. Es importante que las inversiones que se realicen cuenten con periodos de recuperacion de capital atractivos, comparados con la vida util del producto, por lo que el conocimiento y precio de las nuevas tecnologias seran parametros a considerar de manera importante, creandose la necesidad de realizar pruebas que verifiquen la veracidad de la informacion del proveedor, resultando en determinados casos, el cambio de diseno de dichas tecnologias, para que asi cumplan las caracteristicas prometidas. Este trabajo indica las caracteristicas que deben cumplir las nuevas tecnologias ahorradoras de energia electrica y las

Northern Division. Distribution Zone. Juarez.; Division norte. Zona de distribucion. Juarez

Energy Technology Data Exchange (ETDEWEB)

Mendoza, J. M. [Comision Federal de Electricidad (CFE) (Mexico)

2005-07-01

The public service law of electrical energy, its regulation and the manual of services to the public in the matter of electrical energy govern the sale of electrical energy. The Secretaria de Hacienda y Credito Publico altogether with the participation of the Secretarias of Energia, de Comercio y Fomento Industrial, and to the proposal of the Comision Federal de Electricidad (CFE), fixes the tariffs, their adjustment or restructuring. The CFE mission is to satisfy the electrical energy necessities and expectations of the clients, through a profitable and competitive organization, guaranteeing the integral development of its collaborators. Its product, electrical energy, is received from other areas within the CFE. The electrical tariffs simultaneously fulfill three functions: financial, economical and social. [Spanish] La venta de energia electrica se rige por la ley del servicio publico de energia electrica, su reglamento, el manual de servicios al publico en materia de energia electrica. La Secretaria de Hacienda y Credito Publico con la participacion de las Secretarias de Energia, de Comercio y Fomento Industrial, y a propuesta de la Comision Federal de Electricidad (CFE), fija las tarifas, su ajuste o reestructuracion. La mision de CFE es satisfacer las necesidades y expectativas de energia electrica de los clientes, a traves de una organizacion rentable y competitiva, garantizando el desarrollo integral de sus colaboradores. Su producto, la energia electrica, la reciben de otras areas dentro de la CFE. Las tarifas electricas cumplen simultaneamente tres funciones: financiera, economica y social.

Evaluation of avoided carbon dioxide emissions in cogeneration projects; Evaluacion de las emisiones evitadas de bioxido de carbono en proyectos de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Flores Zamudio, Jesus Antonio; Fernandez Montiel, Manuel Francisco; Alcaraz Calderon, Agustin Moises [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: jesus.flores@iie.org.mx; mffm@iie.org.mx; malcaraz@iie.org.mx

2010-11-15

In this paper, presents a methodology of how to calculate the emissions of CO{sub 2} (Carbon Dioxide) in cogeneration of plants for evaluate future cases with the type of fuel and fuel flow used in the plant. The methodology was in spreadsheets developed a series of stoichiometric balances. The methodology was done for three types of fossil fuels: solid, liquid and gas. The analysis is made only to the percentages of the items contained in the fuel flow automatically used and results in the combustion products in tons per hour. This method was compared with the results obtained in the software Thermoflow Inc. (Used in Gerencia de Procesos Termicos of Instituto de Investigaciones Electricas for evaluate various process systems that produce energy power) using different cogeneration systems, that is to say about the technology used emissions compared according to the amount of excess air for each type of technology and at one point before the gas cleaning systems. The results can be evaluated for emissions avoided through the fuel type used and developing a cogeneration plant compared to a conventional plant. [Spanish] En este articulo, se presenta una metodologia de como calcular las emisiones de CO{sub 2} (Bioxido de carbono) en plantas de cogeneracion, para evaluar casos a futuro por medio del tipo de combustible y flujo de combustible a utilizar en la planta. La metodologia se realizo en hojas de calculo, donde se desarrollaron una serie de balances estequiometricos. La metodologia se hizo para tres tipos de combustibles fosiles: solido, liquido y gas. El analisis se realiza con solo dar los porcentajes de los elementos que contiene el combustible y el flujo a utilizarse y automaticamente da como resultado los productos de la combustion en toneladas por hora. Esta metodologia se comparo con los resultados obtenidos en el software Thermoflow Inc. (Empleado en la Gerencia de Procesos Termicos del Instituto de Investigaciones Electricas para evaluar diversos

The fuel cells: Truths on the generation of clean and efficient electricity electrochemical way; Las celdas de combustible: Verdades sobre la generacion de electricidad limpia y eficiente via electroquimica

Energy Technology Data Exchange (ETDEWEB)

Cano Castillo, Ulises [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In the search of alternative technologies for the generation of electrical energy, the Instituto de Investigaciones Electricas (IIE) has put special attention in a technology that promises to be key in the next years: The fuel cells, it is for this reason that in this article a review of this type of cells is presented, as well as its basic characteristics and benefits as a result of its use for the generation of electrical energy. [Spanish] En la busqueda de tecnologias alternativas de generacion de energia electrica, el Instituto de Investigaciones Electricas (IIE) ha puesto atencion especial en una tecnologia que promete ser clave en los proximos anos: Las celdas de combustible, es por ello que en este articulo se presenta una resena de este tipo de celdas, asi como sus caracteristicas principales y beneficios como resultado de su utilizacion para la generacion de energia electrica.

Photovoltaic rural electrification and the electric power utility. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J. M.; Villasenor, F.; Urrutia, M. [eds.] [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1995-12-31

This document contains the national and international programs about photovoltaic systems for rural electrification and the electric power utility experiences about PV programs. The IERE Workshop was hold from May 8 to 12, 1995 in Cocoyoc, Mexico. It was organized by the Electrical Research Institute of Mexico (Instituto de Investigaciones Electricas (IIE)) and the U.S. Electric Power Research Institute (EPRI). The Workshop was attended by 38 delegates from 13 countries [Espanol] Este documento contiene los programas nacionales e internacionales sobre electrificacion fotovoltaica rural y las experiencias en programas fotovoltaicos de empresas electricas. El taller de trabajo IERE fue realizado los dias del 8 al 12 de mayo de 1995 en Cocoyoc, Mexico. Fue organizado por el Instituto de Investigaciones Electricas (IIE) y el U.S. Electric Power Research Institute (EPRI) (Instituto de Investigaciones de Energia Electrica de Estados Unidos). A este taller de trabajo asistieron 38 delegados de 13 paises

Photovoltaic rural electrification and the electric power utility. Workshop. [Selected Papers

Energy Technology Data Exchange (ETDEWEB)

Huacuz, J M; Villasenor, F; Urrutia, M [eds.; Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

This document contains the national and international programs about photovoltaic systems for rural electrification and the electric power utility experiences about PV programs. The IERE Workshop was hold from May 8 to 12, 1995 in Cocoyoc, Mexico. It was organized by the Electrical Research Institute of Mexico (Instituto de Investigaciones Electricas (IIE)) and the U.S. Electric Power Research Institute (EPRI). The Workshop was attended by 38 delegates from 13 countries [Espanol] Este documento contiene los programas nacionales e internacionales sobre electrificacion fotovoltaica rural y las experiencias en programas fotovoltaicos de empresas electricas. El taller de trabajo IERE fue realizado los dias del 8 al 12 de mayo de 1995 en Cocoyoc, Mexico. Fue organizado por el Instituto de Investigaciones Electricas (IIE) y el U.S. Electric Power Research Institute (EPRI) (Instituto de Investigaciones de Energia Electrica de Estados Unidos). A este taller de trabajo asistieron 38 delegados de 13 paises

Solar thermal power plants for heat and electricity generation; Presentacion de plantas termosolares para generacion de calor y energia electrica

Energy Technology Data Exchange (ETDEWEB)

Estrada Cajigal, V [Solartronic S. A. de C. V., Cuernavaca (Mexico); Manzini, F; Sanchez, A [Laboratorio de Energia Solar (IIM-UNAM), Temixco (Mexico)

1993-12-31

Solar thermal technology is presented for concentration into a point for the production of heat and energy in small and large scale, emphasis is made on the capacity for the combination with current technologies using fossil fuels for electricity generation and process steam, increasing the global efficiency of the power plants and notably reducing the pollutants emission to the air during the insolation hours. It is successfully compared with other solar-thermal technologies. [Espanol] Se presenta la tecnologia termosolar de concentracion puntual para produccion de calor y de energia en pequena y gran escala, se enfatiza su capacidad de combinacion con las tecnologias actuales que utilizan combustibles fosiles para produccion de electricidad y vapor de proceso, aumentando la eficiencia global de las plantas y reduciendo notablemente sus emisiones contaminantes a la atmosfera durante las horas de insolacion. Se le compara exitosamente con otras tecnologias termosolares.

Solar thermal power plants for heat and electricity generation; Presentacion de plantas termosolares para generacion de calor y energia electrica

Energy Technology Data Exchange (ETDEWEB)

Estrada Cajigal, V. [Solartronic S. A. de C. V., Cuernavaca (Mexico); Manzini, F.; Sanchez, A. [Laboratorio de Energia Solar (IIM-UNAM), Temixco (Mexico)

1992-12-31

Solar thermal technology is presented for concentration into a point for the production of heat and energy in small and large scale, emphasis is made on the capacity for the combination with current technologies using fossil fuels for electricity generation and process steam, increasing the global efficiency of the power plants and notably reducing the pollutants emission to the air during the insolation hours. It is successfully compared with other solar-thermal technologies. [Espanol] Se presenta la tecnologia termosolar de concentracion puntual para produccion de calor y de energia en pequena y gran escala, se enfatiza su capacidad de combinacion con las tecnologias actuales que utilizan combustibles fosiles para produccion de electricidad y vapor de proceso, aumentando la eficiencia global de las plantas y reduciendo notablemente sus emisiones contaminantes a la atmosfera durante las horas de insolacion. Se le compara exitosamente con otras tecnologias termosolares.

Management program of cables and electrical conductions in operating nuclear power plant; Programa de gestion de cables y conducciones electricas en C. N. en Operacion

Energy Technology Data Exchange (ETDEWEB)

Perez Pereira, J.

2012-07-01

The management of cables and electrical conductions of a nuclear power plant is an activity very important during making the original design and subsequent design modifications, by the cable volume and nuclear safety regulations. During the design and construction of the Nuclear Power Plants, the late XX century, this work was carried out using manual procedures. The introduction of new technology provides users the ability to create relational databases for data according to the needs. Also tools and IT programs develop for the management of these databases with more reliability and a major number of possibilities at the moment of handling the available information. This paper aims to expose advances and developments in this field and present the methodology and lessons learned.

Fuel cycle management by the electric enterprises and spanish nuclear Power plants; Gestion del ciclo de combustible por las empresas electricas y centrales nucleares espanolas

Energy Technology Data Exchange (ETDEWEB)

Celma, E. M.; Gonzalez, C.; Lopez, J. V.; Melara, J.; Lopez, L.; Martinez, J. C.; Culbras, F.; Blanco, J.; Francia, L.

2015-07-01

The Nuclear Fuel Group reports to the Technology Committee of the UNESA Nuclear Energy Committee, and is constituted by representatives of both the Spanish Utilities and the Nuclear Power Plants. The Group addresses the nuclear plant common issues in relation to the operation and management of the nuclear fuel in their different stages of the Fuel Cycle. The article reviews the activities developed by the Group in the Front-End, mainly in the monitoring of international programs that define criteria to improve the Fuel Reliability and in the establishment of common bases for the implementation of changes in the regulation applying the nuclear fuel. Concerning the Back-End the Group focuses on those activities of coordination with third parties related to the management of used fuel. (Author)

I and C upgrades resulting from the systematic evaluation program carried out at the Central Nuclear Jose Cabrera

International Nuclear Information System (INIS)

Humphrey, J.C.

1985-01-01

Central Nuclear Jose Cabrera, also known as Zorita, is a 160 MWe nuclear power plant owned and operated by UNION ELECTRICA-FENOSA, S.A. The plant was supplied by Westinghouse Electric Corporation and commissioned in 1968. It features a unique one loop Pressurized Water Reactor design. The Spanish Licensing Authorities requested C.N. Jose Cabrera to carry out a review of their plant. The main objectives were to reassess the safety adequacy of the operating systems, provide a documented comparison of the plant design versus present day criteria and establish a rationale for departures. Another important objective was to provide prompt identification of any significant deficiency. The review known as phase 1 of the C.N. Jose Cabrera Systematic Evaluation Program, was completed and documented by April 1980

Analysis of passive systems as a tool for energy saving in buildings: solar control; Analisis de sistemas pasivos como herramienta para el ahorro de energia en edificaciones: Control solar

Energy Technology Data Exchange (ETDEWEB)

Saravia, Maricela; Morillon Galvez, David [Instituto de Ingenieria, UNAM, Mexico, D. F. (Mexico)

1999-07-01

A bioclimatic study of El Salvador is presented, with the purpose of using window eaves as elements of passive solar control and to determine the optimal angles of orientation, in order to diminish the thermal gains by direct solar radiation and to manage to get close to the comfort conditions. The former with the intention of integrating measures that help to obtain energy efficiency and comfortable buildings, for the conditions of warm humid climate, characteristic of a Central American country like El Salvador. Besides offering a document of consultation among the professionals dedicated to the design and as base of bioclimatic considerations that must have the construction regulations. As a conclusion the optimal angles of eaves for each orientation are presented and a quantitative estimation of the savings that would imply not to consume electrical energy in cooling systems using these elements as a protection to the direct solar radiation. [Spanish] Se presenta un estudio del bioclima de El Salvador, con el fin de utilizar aleros de ventana como elementos de control solar pasivo y determinar los angulos optimos por orientacion, para disminuir las ganancias termicas por radiacion solar directa y lograr acercar a las condiciones de confort. Lo anterior con el objeto de integrar medidas que coadyuven a lograr edificios energeticamente eficientes y confortables, para las condiciones de clima calido humedo, caracteristico de un pais centroamericano como El Salvador. Ademas de brindar un documento de consulta entre los profesionales dedicados al dise y como base de consideraciones bioclimaticas que debe tener el reglamento de construcciones. Como conclusion se presentan los angulos optimos de alero por cada orientacion y una estimacion cuantitativa del ahorro que implicaria el no consumir energia electrica en sistemas de enfriamiento utilizando estos elementos como una proteccion a la radiacion solar directa.

Updates of the fire protection system of the Juzbado Nuclear Fuel Fabrication Plant; Actualizaciones del Sistema de Proteccion Contra Incendios de la Fabrica de Combustible Nuclear de Juzbado

Energy Technology Data Exchange (ETDEWEB)

Dorado, P.; Palomo, J. J.; Romano, A.

2015-07-01

The Juzbado Nuclear Fuel Fabrication Plant fire protection system is one of the most important safety system of the plant. Every year, a large part of the annual investment is employed to improve this system, to update its technology, in order to improve detection and extinction capability to minimize fire risk. Over the last few years, several improvement projects have been carried out that focused on fire detection technology update and on optimization of local detectors integration with a centralized control system, as well as on an advanced public address system, which used clear and unambiguous messages improving personnel response to a plant evacuation. Planned projects and those, which are currently under development, focus on improving passive fire protection means as well as fire protection of key emergency response equipment s such as emergency diesel generators and fire extinguishing bombs. (Author)

Electrical energy saving in motors and frequency variators; Ahorro de energia electrica en motores y variadores de frecuencia

Energy Technology Data Exchange (ETDEWEB)

Garcia Neri, Roger [Comision Federal de Electricidad (CFE) (Mexico)

2005-07-01

The necessity of saving energy is urgent and undeniable. We must already begin with the rational use of energy. Which is obtaining the maximum benefit of the consumed energy and of the necessary facilities for its generation, transmission and use. Guaranteeing at the same time an operation free of interferences or interruptions for the users. The electricity in alternating current does not allow its storage, reason why it is necessary to generate and distribute it at the precise moment when it is required. This forces to determine the proportions of the generation facilities, to be able to feed the periods of maximum demand called {sup p}eaks{sup .} It is this very point where the problem of the inappropriate use of the electrical energy starts. The energy waste is self-evident during the periods of low demand because of the low efficiency of the sub-utilized facilities. Electrical motors of the induction type use approximately more than 60% of the energy in the industry. If we use high efficiency motors instead of standard motors, a better advantage of the energy demanded from Comision Federal de Electricidad (CFE) is obtained. [Spanish] Es impostergable e innegable la necesidad de ahorrar energia. Tenemos que empezar ya con el uso racional de la energia: Obtener el maximo beneficio de la energia consumida y de las instalaciones necesarias para su generacion, transmision y utilizacion. Garantizando a los usuarios un funcionamiento sin interferencias o interrupciones. La electricidad en corriente alterna no permite su almacenamiento, por lo que es necesario generarla y distribuirla en el momento preciso en que es requerida. Esto obliga a dimensionar las instalaciones de generacion, para poder alimentar los periodos de maxima demanda llamados pico. Desde esta parte inicia el problema de la mala utilizacion de la energia electrica. Ya que en los periodos de baja demanda, las instalaciones se encuentran subutilizadas y si su eficiencia es muy baja, el desperdicio de

State of the art of technologies thermosolar to concentration; Estado del arte de las tecnologias termosolares a concentracion

Energy Technology Data Exchange (ETDEWEB)

Ramos Berume, Carlos; Huacuz Villamar, Jorge M; Medrano Vaca, M. Consolacion [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

Nowadays Research and Development activities on Solar Thermal Power Generating Systems are supported by some countries around the world. Because of their thermal nature each of these plants can be operated only with solar energy or can be hybridized (solar/fossil fuel) and also with thermal storage systems. These types of solar thermal power plants are: Central Receiver, a circular field of tracking mirrors called helisotats reflects the solar energy onto receiver mounted on top of a central tower. Parabolic Trough, use linear parabolic concentrators to reflect sunlight to a receiver along the focal line (metallic pipe). Inside the pipe solar energy is absorbed in a working fluid with temperatures up to 390 Celsius degrees, which is then piped to a central location to power a conventional steam turbine and Parabolic Dish uses a parabolic dish concentrator to focus solar energy to a receiver and a heat engine/generator, located at the focus of the dish, to generate electrical power. In this document, we present the current status of technologies. A description of market opportunities, cost and technological perspectives are also included. [Spanish] Actualmente la Investigacion and Desarrollo para la generacion de potencia electrica mediante el aprovechamiento de la energia solar por la ruta termodinamica esta siendo apoyada por varios paises. Debido a su naturaleza termica estas pueden operar bajo esquemas de operacion solo con energia solar o en forma de plantas hibridas (solar-combustible fosil) y en algunos casos adaptadas con sistemas de almacenamiento termico. Los tipos de plantas solares de generacion electrica son: Receptor Central (RC), utilizan un campo colector con dispositivos llamados heliostatos arreglados en un campo circular y reflejando la radiacion solar sobre un receptor montado en la parte mas alta de una torre. Canal Parabolica (CP), estas plantas utilizan espejos curvados en forma de una parabola que redirigen los rayos del sol sobre su linea

Photovoltaic systems interconnected to the electric network; Sistemas fotovoltaicos interconectados a la red electrica

Energy Technology Data Exchange (ETDEWEB)

Agredano Diaz, Jaime [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-06-15

. Enseguida, se muestra la solucion que le encontro el Gobierno del Estado a este problema para lo que fue necesaria la participacion del Instituto de Investigaciones Electricas (IIE). Esta participacion, se traduce en un proyecto que muestra la viabilidad de instalar sistemas fotovoltaicos interconectados a la red de la Comision Federal de Electricidad (CFE) en casas habitacion. Despues, se presenta una descripcion no solo de los elementos que conforman el sistema, sino tambien de la metodologia y el funcionamiento del mismo. Posteriormente, se presenta el efecto positivo, economicamente y ambientalmente hablando, que tuvo la instalacion del sistema en las 220 casas habitacion del fraccionamiento Valle de las Misiones, asi como las caracteristicas generales del mismo. Ademas, se presenta la manera de alcanzar un mayor impacto y cobertura del sistema. Finalmente, se presentan los auspiciadotes del proyecto: la Secretaria de Energia (SENER), la CFE, la Comision Reguladora de Energia (CRE), la Universidad Autonoma de Baja California (UABC), el IIE, el Banco de Desarrollo de America del Norte (BDAN) y el Gobierno del Estado de Baja California.

The electric power generation in Mexico and its environmental impacts: Past, present and future; La generacion electrica en Mexico y sus impactos ambientales: Pasado, presente y futuro

Energy Technology Data Exchange (ETDEWEB)

Quintanilla Martinez, Juan [Programa Universitario de Energia (PUE), Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D. F. (Mexico)

1997-12-31

The purpose of this paper is to analyze the historical evolution, past and present of the installed capacity and of the electric power generation, as well as the fuel consumption and the associated green-house gases emission. Also, under the technique of economic scenarios and future towns (in short and mediate terms) the potential needs of installed capacity, generation, mix and fuel consumption and associated green gases emissions is analyzed. Later on a comment is made on the energy implications of the substitution of fuels policies and the environmental Standards. Finally, a series of comments is established on the possible technological directions for the sector, from the stand point of generation efficiency and its effects in the reduction of emissions [Espanol] El proposito del presente trabajo es analizar la evolucion historica, pasada y presente, de la capacidad instalada y de la generacion electrica, asi como el consumo de combustibles y las emisiones de gases de invernadero asociadas. Tambien se analiza bajo la tecnica de escenarios economicos y poblaciones a futuro (en el corto y mediano plazo) las posibles necesidades de capacidad instalada, generacion, mezcla y consumo de combustibles y emisiones de gases de invernadero asociadas. Posteriormente se comenta sobre las implicaciones energeticas de las politicas de sustitucion de combustibles y estandares ambientales. Por ultimo se establecen una serie de comentarios sobre las posibles direcciones tecnologicas para el sector, desde el punto de vista de la eficiencia de generacion y sus efectos en la reduccion de las emisiones

Fuzzy control for the operation of an electrical energy generation system based on standard fuel cells PEM; Control difuso para la operacion de un sistema de generacion de energia electrica basado en celdas de combustible tipo PEM

Energy Technology Data Exchange (ETDEWEB)

Vazquez R, Miguel; Gutierrez A, Ruben [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Rodriguez P, Alejandro [Centro Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

2005-07-01

Fuel cells, as totally clean power plants, have many applications in the industry in general, in the transport system, in the electricity generation for domestic consumption and in the communication systems, among others. When developing new forms of generation with renewable energy sources, it must be considered that petroleum will stop in being an available power resource. The interest in the study of the fuel cells has been increased in the last years because it is considered a solution to the supply of distributed energy problem. Therefore, already exist research institutions that are developing work on this technology. A generation of electrical energy system based on fuel cells is a nonlinear system where the control of the variables of the process, such as the temperature of the system and the pressurization of the reactants, are an important aspect for its proper operation, since it influences in the water balance and therefore in the global efficiency of the system. [Spanish] Las celdas de combustible, como fuente de energia totalmente limpia, tienen muchas aplicaciones en la industria en general: en el sistema de transporte, en la generacion de electricidad para consumo domestico y en los sistemas de comunicacion, entre otros. Al desarrollar nuevas formas de generacion con fuentes de energia renovables, se debe considerar que el petroleo dejara de ser un recurso energetico disponible. El interes en el estudio de las celdas de combustible se ha incrementado en los ultimos anos debido a que se le considera una solucion al problema de abasto de energia distribuida. Por lo tanto, ya existen instituciones de investigacion que estan desarrollando trabajos sobre esta tecnologia. Un sistema de generacion de energia electrica basado en celdas de combustible es un sistema no lineal en donde el control de las variables del proceso, tales como la temperatura del sistema y la presurizacion de los reactantes, es un aspecto importante para su buen funcionamiento, ya que

Negative sequence relay applied to generator 1 of the Laguna Verde nuclear power plant; Aplicacion de un relevador de secuencia negativa en el generador 1 de la central de Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Diaz de la Serna P, Enrique [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

The rotor of a synchronous generator can be dangerously heated in a short time by stator current unbalance, therefore it must be protected with a specific relay. This article discusses the protection and the adjustments selected for Unit 1 of the Comision Federal de Electricidad Laguna Verde Nuclear Nuclear Power Station. [Espanol] El rotor de un generador sincrono puede calentarse peligrosamente en un tiempo corto debido a desbalance de corrientes en el estator, por lo que debe protegerse con un relevador especifico. En este articulo se describen la proteccion y los ajustes seleccionados para la unidad 1, de la central nucleoelectrica Laguna Verde de la Comision Federal de Electricidad.

Algorithms for the evaluation of the reliability of networks and substations; Algoritmos para evaluar la confiabilidad de redes y subestaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Vega Ortiz, Miguel [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

Two algorithms are presented, one for analyzing the reliability of networks and another one to analyzing the reliability of electrical substations. The algorithms model a network or a substation by means of a graph and determine all the exits, of up to third degree, which isolates the load points. The algorithm that is used for the network analysis, is the one of p-cuts and in the case of the substations it is the one of minimum ways, for later, from these minimum p-cuts and of the minimum ways, obtains the minimum cuts. These minimum cuts are evaluated with the approximate method and give as a result the system reliability and of each one of the components that have been modeled. At the end some examples and results obtained are shown. As case of study, the algorithm is applied to two substations arrangements and to a network of industrial distribution, but it is possible to be applied to transmission and distribution networks. [Spanish] Se presentan dos algoritmos, uno para analizar la confiabilidad de redes y otro para analizar la confiabilidad de subestaciones electricas. Los algoritmos modelan una red o una subestacion por medio de un grafo y determinan todas las salidas, de hasta tercer grado, que aislan los puntos de carga. El algoritmo que se utiliza para el analisis de redes, es el de p-cortes y en el caso de las subestaciones es el de caminos minimos, para despues, a partir de estos p-cortes minimos y de los caminos minimos, obtener los cortes minimos. Estos cortes minimos se evaluan con el metodo aproximado y dan como resultado la confiabilidad del sistema y de cada una de las componentes que se hayan modelado. Al final se muestran algunos ejemplos y resultados obtenidos. Como caso de estudio, el algoritmo se aplica a dos arreglos de subestaciones y a una red de distribucion industrial, pero se puede aplicar a redes de transmision y de distribucion.

Turbomachinery; Turbomaquinaria

Energy Technology Data Exchange (ETDEWEB)

Rivas, Elena [ed.] [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The fossil fuel power stations have a large number of rotary equipment that faces diverse problems that do necessary to improve the present practices of operation and maintenance. In this article are presented the main systems that the Instituto de Investigaciones Electricas (IIE) offers nowadays for the predictive maintenance of rotary equipment in fossil fuel power plants developed by the Management of Turbomachinery. The systems that are described are: the Portable one, the SICAD (Computerized System for Dynamic Analysis), the SMC (Continuous Monitoring System) and finally the SIMPER (Computer Information System for the Predictive Maintenance of Rotary Equipment) [Spanish] Las centrales termoelectricas cuentan con una gran cantidad de equipo rotatorio que enfrenta diversos problemas que hacen necesario mejorar las practicas actuales de operacion y mantenimiento. En este articulo se presentan los principales sistemas que ofrece actualmente el Instituto de Investigaciones Electricas (IIE) para el mantenimiento predictivo de equipos rotatorios en centrales termoelectricas desarrollados en la Gerencia de Turbomaquinaria. Los sistemas que se describen son; el Portil, el Sicad ( Sistema Computarizado para Analisis Dinamico), el SMC ( Sistema de Monitoreo Continuo) y por ultimo el SIMPER (Sistema Informatico para el mantenimiento Predictivo de Equipo Rotatorio)

Options of electric generation and sustainability; Opciones de generacion electrica y sustentabilidad

Energy Technology Data Exchange (ETDEWEB)

Martin del Campo M, C. [UNAM, Facultad de Ingenieria, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, Paseo Cuauhnahuac 8532, Jiutepec, Morelos (Mexico)

2004-07-01

In this paper a study on the sustainability of the main electricity generation options is presented. The study is based on a matrix of sustainability indicators developed in Switzerland. A revision of some sustainability studies performed in countries with certain energy diversity and with experience in nuclear power plants operation, is done. Studies, in general, are performed for the power plant life cycle, taking into account economic aspects, fuel prices impact on electricity generation costs, fuel reserves indicators and material consumption. Air emission, waste production and human health impact data are also presented. All the results lead to confirm that nuclear energy has a high degree of sustainability vis a vis other options based on fossil fuels and renewable. Finally some comments are presented in order to highlight the importance that nuclear energy might have in the sustainable development of Mexico. (Author)

The presence of harmonics in electric installations and some of its consequences; La presencia de corrientes armonicas en instalaciones electricas y algunas de sus consecuencias

Energy Technology Data Exchange (ETDEWEB)

Bratu Serban, Neagu; Campero Littlewood, Eduardo [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D. F. (Mexico)

1996-12-31

This paper is a short introduction to how the sinusoidal voltage waves are generated. A revision is made on the way of representing a distorted wave and the way of quantifying its harmonics content (harmonics distortion). An overview is made of the non-lineal consuming elements that produce distortion of the current waves. A revision is made on the concept of a power factor in conditions of waves with harmonic distortion. The consequences of feeding with distorted waves the different devices such as motors (particularly for the distortion originated by the rectifiers and the velocity electronic controls), transformers and capacitors. Mention is made of some of the methods for not to produce or for reducing the harmonic effect in the electric networks. The purpose of this article is to review the consequences on energy consumption by the presence of harmonics. [Espanol] En este articulo se hace una breve introduccion de la forma en que se generan las ondas senoidales de voltaje. Se revisa la manera de representar una onda distorsionada y la manera de cuantificar su contenido de armonicas (distorsion armonica). Se repasan los elementos consumidores no lineales que producen la deformacion de las ondas de corriente. Se revisa el concepto de factor de potencia en condiciones de ondas con distorsion armonica. Se analizan las consecuencias de alimentar con ondas distorsionadas a diferentes equipos como motores (particularmente por la distorsion originada por los rectificadores y los controladores de velocidad electronicos), transformadores y capacitores. Se mencionan algunos metodos para no producir, o reducir el efecto armonico en las redes electricas. El proposito de este articulo es revisar las consecuencias sobre el consumo de energia por la presencia de armonicas.

The presence of harmonics in electric installations and some of its consequences; La presencia de corrientes armonicas en instalaciones electricas y algunas de sus consecuencias

Energy Technology Data Exchange (ETDEWEB)

Bratu Serban, Neagu; Campero Littlewood, Eduardo [Universidad Autonoma Metropolitana Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

This paper is a short introduction to how the sinusoidal voltage waves are generated. A revision is made on the way of representing a distorted wave and the way of quantifying its harmonics content (harmonics distortion). An overview is made of the non-lineal consuming elements that produce distortion of the current waves. A revision is made on the concept of a power factor in conditions of waves with harmonic distortion. The consequences of feeding with distorted waves the different devices such as motors (particularly for the distortion originated by the rectifiers and the velocity electronic controls), transformers and capacitors. Mention is made of some of the methods for not to produce or for reducing the harmonic effect in the electric networks. The purpose of this article is to review the consequences on energy consumption by the presence of harmonics. [Espanol] En este articulo se hace una breve introduccion de la forma en que se generan las ondas senoidales de voltaje. Se revisa la manera de representar una onda distorsionada y la manera de cuantificar su contenido de armonicas (distorsion armonica). Se repasan los elementos consumidores no lineales que producen la deformacion de las ondas de corriente. Se revisa el concepto de factor de potencia en condiciones de ondas con distorsion armonica. Se analizan las consecuencias de alimentar con ondas distorsionadas a diferentes equipos como motores (particularmente por la distorsion originada por los rectificadores y los controladores de velocidad electronicos), transformadores y capacitores. Se mencionan algunos metodos para no producir, o reducir el efecto armonico en las redes electricas. El proposito de este articulo es revisar las consecuencias sobre el consumo de energia por la presencia de armonicas.

Forest pests in central America: Field guide. Technical manual

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

In Central America, plant health problems have grown to an unprecedented level during the past few years along with the establishment of extensive homogeneous forest plantations, at times leading to the such drastic solutions as widespread felling of trees or massive use of pesticides. This field guide on forest pests was commissioned by the Multipurpose Tree Crop Dissemination (MADELENA) project and focuses on pests found in Costa Rica, home of PIROF (Programa Interinstitucional de Proteccion Forestal), a pioneer in forest pest research. The guide offers fast identification of forest pests and some general information on their biology and epidemiology. It consists of two sections: (1) lists of the specific pests (insects, vertebrates, pathogens, and parasites) of 18 priority forest tree species, and lists of the specific tree part or developmental stage they afflict.

Supervisory control system based on PC applied to substations automatization of and to regional operation centers of distribution networks; Sistema de control supervisorio basado en PC aplicado en automatizacion de subestaciones y centros de operacion regional de redes de distribucion

Energy Technology Data Exchange (ETDEWEB)

Picasso B, Cuitlahuac [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Astorga Q, Clemente [Luz y Fuerza del Centro (Mexico)

2003-07-01

In order to increase the services quality in the electrical energy, to improve the process of identification of energy losses, to increase the equipment efficiency, to count on more complete statistics of profiles of load consumptions, among other applications, the Compania de Luz y Fuerza del Centro (LyFC) carries out the modernization in automatization of substations and regional operation centers of distribution networks. The technological base to make these programs requires automating the operative schemes of the substation and distribution centers that supervise the events of the electrical process. In this article the main results of the development and integration of master stations based on PC, that were made in the Instituto de Investigaciones Electricas (IIE) and that have been integrated in the electrical company LyFC are presented. [Spanish] Con el proposito de incrementar la calidad de los servicios en la energia electrica, mejorar el proceso de identificacion de perdidas de energia, aumentar la eficiencia de los equipos, contar con estadisticas mas completas de perfiles de consumos de carga, entre otras aplicaciones, la Compania de Luz y Fuerza del Centro (LyFC) lleva a cabo la modernizacion en automatizacion de subestaciones y centros de operacion regional de redes electricas de distribucion. La base tecnologica para realizar estos programas, requiere de automatizar los esquemas operativos de la subestacion y centros de distribucion que supervisan los eventos del proceso electrico. En este articulo se presentan los principales resultados del desarrollo e integracion de estaciones maestras basadas en PC, que se realizaron en el Instituto de Investigaciones Electricas (IIE) y que se han integrado en la compania electrica LyFC.

Online monitoring of accessories for underground electrical installations through acoustics emissions; Monitoreo en linea de accesorios de instalaciones electricas subterraneas mediante emisiones acusticas

Energy Technology Data Exchange (ETDEWEB)

Casals-Torrens, P. [Universidad Politecnica de Cataluna, Barcelona (Espana)]. E-mail: p.casals@upc.edu; Gonzalez-Parada, A. [Universidad de Guanajuato, Guanajuato (Mexico)]. E-mail: gonzaleza@salamanca.ugto.mx; Bosch-Tous, R. [Universidad Politecnica de Cataluna, Barcelona (Espana)

2012-04-15

The acoustic waves caused by Partial Discharges inside the dielectric materials, can be detected by acoustic emission (AE) sensors and analyzed in the time domain. The experimental results presented, show the online detection capability of these sensors in the environment near a cable accessory, such as a splice or terminal. The AE sensors are immune to electromagnetic interference and constitute a detection method non-intrusive and non-destructive, which ensures a galvanic decoupling with respect to electric networks, this technique of partial discharge detection can be applied as a test method for preventive or predictive maintenance (condition-based maintenance) to equipment or facilities of medium and high voltage in service and represents an alternative method to electrical detection systems, conventional or not, that continue to rely on the detection of current pulses. This paper presents characterization tests of the sensors AE through comparative tests of partial discharge on accessories for underground power cables. [Spanish] Las ondas acusticas provocadas por las descargas parciales en el interior de un dielectrico pueden ser detectadas por sensores de Emisiones Acusticas (EA) y analizadas en el dominio del tiempo. Los resultados experimentales que se presentan, evidencian la capacidad de deteccion en linea de estos sensores, en el entorno proximo a un accesorio de cable, empalme o terminal. Los sensores EA son inmunes a las interferencias electromagneticas, son un metodo de deteccion no destructivo y garantizan desacople galvanico respecto a la red electrica; esta tecnica de deteccion de descargas parciales puede ser aplicada como metodo de prueba para mantenimiento preventivo o predictivo (mantenimiento basado en la condicion), en equipos o instalaciones de media y alta tension en servicio, y representa una alternativa a los sistemas electricos de deteccion, convencionales o no, que continuan basandose en la deteccion del impulsos de corriente. En el

Non-destructive testing; Examenes no destructivos

Energy Technology Data Exchange (ETDEWEB)

Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

Non-destructive testing; Examenes no destructivos

Energy Technology Data Exchange (ETDEWEB)

Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

IIE Bulletin: selected articles from 1998 issues of `Boletin iie`; Articulos selecccionados del Boletin iie

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas in Mexico, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the ETDE Energy database. [Espanol] El Boletin IIE es producido en Mexico por el Instituto de Investigaciones Electricas. Este se publica 6 veces al ano. Se han preparado citas y resumenes para articulos individuales dentro del alcance de la base de datos Energy del ETDE.

IIE Bulletin: selected articles from 1998 issues of `Boletin iie`; Articulos selecccionados del Boletin iie

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas in Mexico, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the ETDE Energy database. [Espanol] El Boletin IIE es producido en Mexico por el Instituto de Investigaciones Electricas. Este se publica 6 veces al ano. Se han preparado citas y resumenes para articulos individuales dentro del alcance de la base de datos Energy del ETDE.

Twelve years of continuous measurements of atmospheric electrical activity in Mexico's Tropical highland

Energy Technology Data Exchange (ETDEWEB)

Troncoso Lozada, O. [Centro de Ciencias de la Atmosfera, Universidad Nacional Autonoma de Mexico (UNAM), Mexico, D.F. (Mexico)

2004-04-01

Atmospheric electric activity measurements have been recorded continuously by a punctual lightning system at a tropical highland observatory from 1988 onwards, and were analyzed to obtain lightning statistical confident results for thunderstorms occurrence on the leeward side of the southern mountain ridge of Mexico's Valley. Shown, as examples, are individual profiles of the atmospheric electrical activity, associated with severe storms. The results make clear that the fastest possible sequence of electrical measurements is required to obtain significant and applications oriented data in connection with a whole series of thunderstorms taking into account the mean time variation of the atmospheric electricity measurements at an altitude of 2270 m a.s.l. The seasonal variation indicates that the lightning flash peak currents were found to be larger in summer with less than 10% occurring in the autumn and winter. With rainfall data from a network of 66 stations, we obtained a significant correlation with the lightning frequency. Special attention was undertaken concerning the question of the atmospheric electrical activity and climate at Valley of Mexico. [Spanish] Se midieron ininterrumpidamente las variaciones de la actividad electrica en la atmosfera, de enero de 1988 a diciembre de 1999, en un observatorio de altura (2,250 m s.n.m.), y se analizaron para obtener resultados estadisticos confiables con relacion a la ocurrencia de tormentas en la region sur del Valle de Mexico. Como ejemplos, se muestran los perfiles individuales de la actividad electrica atmosferica asociada con tormentas severas. Los resultados dejan claro que se requiere de la secuencia de medidas electricas lo mas rapida posible para obtener datos significativos y aplicables en relacion con una serie completa de tormentas, considerando la media del tiempo de variacion de las mediciones de la actividad electrica atmosferica a una altitud de 2,270 m s.n.m. La validacion estacional indica que

Performance study of a combined cycle power plant with integral gasification; Estudio del desempeno de una planta de potencia de ciclo combinado con gasificacion integral

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Rocha, Jose Clemente

2007-04-15

At world-wide level, in the last decade the interest has been increased in the use of petroleum coke as fuel in the clean generation of energy applying the gasification technology. This interest is mainly due to the increment the production of petroleum coke as a result of processing larger volumes of crude processed in the refineries and to the increment in the yield of products with high added value, such as turbo-fuel or diesel, among others. With the new reconfiguration of the Mexican refinery of Cd. Madero and Cadereyta and soon with the completion of the reconfiguration of the Minatitlan, Veracruz refinery, larger amounts of coke will be produced, with the possibility of using it, by means of the appropriate gasification technology, to produce a clean synthetic gas (gasl) with the appropriate energy characteristic to be used as fuel in a combined cycle existing in Mexico. In Mexico the possibilities of generation of electrical energy from the utilization of petroleum coke have been considered departing from the use of petroleum coke using the gasification technology or using fluidized bed steam generators as is the case of the power plant TEG in Taquin, San Luis Potosi. Such is the fact, that at the moment PEMEX Refinacion, has completed the project of constructing in Tuxpan, Veracruz a crude processing refinery of Mayan crude with a high sulfur content and next to the Tuxpan Power Plant, being contemplated the possibility of applying the concept of combined cycle with integrated gasification (CCGI); with this infrastructure it will be possible to consume the coke generated by the Mexican refineries. The expected electrical generation is of 500 MW, of which 100 MW will be for own consumption of the refinery and 400 MW free to cover the electrical energy demand within the North East and Center Zone of the country. The petroleum coke derived from the refineries of the country can be used for the clean generation of electricity by means of its gasification and

Tidal power plant energy estimation; Cuantificacion de energia de una planta mareomotriz

Energy Technology Data Exchange (ETDEWEB)

Lopez Gonzalez, J.; Hiriart Le Bert, G.; Silva Casarin, R. [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (mexico)]. E-mail: JlopezGo@iingen.unam.mx; gerardo367@yahoo.com.mx; RSilvaC@iingen.unam.mx

2010-04-15

In this paper a methodology is presented which allows a quick and simple means of estimating the potential energy that can be obtained from a tidal power plant. The evaluation is made using a normalised nomograph, which is a function of the area of the tidal basin against the electricity installed capacity to thus obtain the potential energy for any location. The results describe two means of operation, one of flow tide and the other flow-ebb tides, with two tidal basin systems operating: single and double reservoir systems. To obtain the normalised nomograph the numerical results for simulations of several tidal power plants under differing operational conditions over a period of one year. These conditions were established by varying the electricity installed capacity, the hydraulic conditions in flow tide, ebb tides or both and with single or double reservoir systems and using sea level information taken every 15 minutes. To validate the model information from the tidal power plant at Rance, France, was used, which includes data concerning production, electricity installed capacity, turbine characteristics and tidal ranges. A very good correlation was found between the results of the numerical model and those reported in various technical reports. [Spanish] Se presenta una metodologia que permite estimar de manera rapida y sencilla el potencial de energia que puede ser extraido a traves de una planta mareomotriz. La evaluacion se realiza utilizando un nomograma normalizado que es funcion del area del embalse versus la capacidad electrica instalada, para asi obtener el potencial energetico en una zona en particular. Los resultados contemplan dos formas de operacion, una llamada en flujo y otra en flujo-reflujo, dos esquemas de embalse (sencillo y doble embalse). Para la elaboracion del nomograma normalizado se utilizaron resultados numericos de la simulacion de multiples plantas mareomotrices bajo diferentes escenarios durante un ano de operacion. Los escenarios

DTN and international cooperation of the Spanish Nuclear Sector in nuclear technology development processes

International Nuclear Information System (INIS)

Acero, M.

1995-01-01

The Spanish electrical utilities with interests in the Nuclear Sector-IBERDROLA, ENDESA,FUERZAS ELECTRICAS DE CATALU=A5A (FECSA), UNION ELECTRICA FENOSA S.A., COMPA=A5IA SEVILLANA DE ELECTRICIDAD S.A., AND HIDROELECTRICA DEL CANTABRICO S.A.-created on September 26, 1994 the ''Agrupacion Electrica para el Desarrollo Tecnologico Nuclear, A.I.E. (DTN)'' (Electrical Society for Nuclear technology Development A.I.E.) for the purpose of promoting and managing Nuclear Nechnology Development, and integrating and coordinating the efforts of the Nuclear Electrical Sector with industrial companies and other related institutions in spain and abroad. This mission is primarily accomplished by establinhing a common strategy for the Nuclear Electrical Sector in the different areas of responsibility of DTN, centralizing actions by implementing a clear and coherent policy, and ensuring the presence of the entire Electrical Sector in all those fora deemed to be strategic to the Nuclear Sector

Super compacting of drums with dry solid radioactive waste in the nuclear power plant of Laguna Verde;Super compactacion de bidones con desecho radiactivo solido seco en la central nucleo electrica Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Ramirez G, R.; Lara H, M. A.; Cabrera Ll, M.; Verdalet de la Torre, O., E-mail: marco.lara@cfe.gob.m [Comision Federal de Electricidad, Central Nucleoelectrica de Laguna Verde, Carretera Nautla-Cardel Km. 42.5, Alto Lucero, Veracruz (Mexico)

2009-10-15

The nuclear power plant of Laguna Verde located in the Gulf of Mexico, completes in this 2009, nineteen years to produce by nuclear means 4.78% of the electric power that Mexico requires daily. During this time, the Unit 1 has generated more of 88.85 million mega watt-hour and the Unit 2 more of 69.48 million mega watt-hour with an availability average of 83.55%. Derived of their operation cycles, the nuclear power plant has generated (as any other installation of its type) radioactive wastes of low activity that at the moment are temporarily stored in the site. Due to the life cycle of the nuclear power plant, actually has become necessary to begin a project series focused to continue guaranteeing the storage of these wastes, guarantee that is a license requirement for the operation of this nuclear installation before the National Commission of Nuclear Security and Safeguards. The Federal Commission of Electricity beginning a project that allows continue guaranteeing space of sufficient storage for the wastes that the nuclear power plant of Laguna Verde could generate for the rest of its useful life, this project consisted on a process of physical volume reduction of dry solid radioactive wastes denominated super compacting, it has made possible to reduce the volume that these wastes occupy in the temporary storage noted Dry Solid Radioactive Wastes Deposit located inside the site that occupies the nuclear power plant of Laguna Verde. This work presents the super compacting results, as well as a description of the realization of this task until concluding with the super compacting of 5,854 drums with dry solid radioactive waste of low activity. We will enunciate which were the radiological controls that the Department of Radiological Protection of the nuclear power plant of Laguna Verde applied to this work that was realized for first time in Mexico and the nuclear power plant. (Author)

Testing and start up of equipment in a substation; Pruebas y puesta en servicio del equipo de una subestacion

Energy Technology Data Exchange (ETDEWEB)

Raull-Martin, J. [Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2001-09-01

The purpose of this paper is to present a summarized version of the test series required to determine out the final condition of the isolations, the continuity of the control circuits, as well as protection, measurement, sing-positing, alarms and the total substation performance. [Spanish] El proposito de este articulo es presentar en forma compacta la serie de pruebas que se requieren para determinar el estado final de los aislamientos, la continuidad de los circuitos de control, proteccion, medicion, senalizacion, alarmas, asi como el funcionamiento del conjunto de la subestacion. Se muestra una grafica K-Temperatura y de conexiones para las pruebas con megger. Se muestra un diagrama de conexiones para determinar las marcas de polaridad este tipo bushing e interruptores; asi como para el faseo de una proteccion diferencial. Se da el diagrama de faseo interno y energizado por el lado de 23 kV de una subestacion de 230 kV.

Hybrid system of generating electricity, solar eolic diesel San Juanico, Baja California Sur, Mexico; Sistema hibrido de generacion electrica, eolico solar diesel San Juanico, Baja California Sur, Mexico

Energy Technology Data Exchange (ETDEWEB)

Huerta, Javier [Comision Federal de Electricidad, La Paz, Baja California Sur (Mexico); Johnston, Peter [Technology Development, Arizona (United States); Napikoski, Chester [Generation Engineering, Arizona (United States); Escutia, Ricardo [Comision Federal de Electricidad, Baja California Sur (Mexico)

2000-07-01

is generated thru the selling of electric energy, guarantees the sustainable operation of the system. [Spanish] La Comision Federal de Electricidad (CFE), y la empresa electrica norteamericana Arizona Public Service (APS), firmaron un convenio de colaboracion para desarrollar un proyecto de generacion de energia electrica con la utilizacion de energias renovables. Las premisas que se acordaron fueron las siguientes: 1. Enfoque del proyecto hacia una comunidad rural. 2. El costo de la obra debera ser menor al de su interconexion con el sistema convencional. 3. Aceptacion por parte de la comunidad, y autoridades gubernamentales. 4. Sustentabilidad de la operacion del sistema. Se efectuaron diversos analisis tecnicos y economicos asi como la evaluacion del recurso solar y eolico, estudio de impacto ambiental, plan de negocios para obtener la aprobacion de los recursos economicos ante instancias como Niagara Mohawk (NIMO), y la USAID, mediante la supervision de los Laboratorios Nacionales de Sandia. Despues de efectuarse las mediciones anemometricas y de radiacion solar, en diversas comunidades, se considero a la comunidad de San Juanico como la mas viable; tambien los aspectos de logistica, sociales, tamano de la comunidad y como detonador para las actividades economicas como la pesca y el turismo. La APS llevo a cabo el proyecto ejecutivo de conformidad con las recomendaciones de la Comision Federal de Electricidad. El proyecto consistio basicamente en la instalacion de 10 aerogeneradores de 10 Kw. c/u, un arreglo solar de 17 Kw., un inversor de 70 Kw., un banco de baterias de 432 Kwh., mas un motogenerador diesel de emergencia de 80 Kw. Ademas de la obra civil y electromecanica. Fue necesario involucrar a la poblacion en el conocimiento y seguimiento del proyecto desde sus inicios, ya que consideramos que este factor seria indispensable para lograr el exito del mismo. Se instalaron lamparas ahorradoras de energia en viviendas y alumbrado publico para optimizar el

Radiation protection; Proteccion Radiologica

Energy Technology Data Exchange (ETDEWEB)

Ures Pantazi, M [Universidad de la Republica, Facultad de Quimica (Uruguay)

1994-12-31

This work define procedures and controls about ionizing radiations. Between some definitions it found the following topics: radiation dose, risk, biological effects, international radioprotection bodies, workers exposure, accidental exposure, emergencies and radiation protection.

Notes on the Start-Up of the Latina Power Station; Notes concernant le demarrage de la centrale nucleaire de Latina; Zapusk ehlektrostantsii Latina; Notas sobre la puesta en marcha de la central electrica de Latina

Energy Technology Data Exchange (ETDEWEB)

Calabria, G.; Gualtieri, G. [AGIP Nucleare, Milano (Italy)

1963-10-15

Information is given on the start-up of the first Italian nuclear power plant, the Latin Power Station, designed for an electrical output of 200 MW, incorporating a natural uranium-gas-graphite reactor. After a brief description of the main characteristics of the station, details are given on die performance of the final tests of the plant, on the fuel loading and on the sequence of commissioning operations, measurements and controls subsequent to the criticality attained. The operations for the start-up and connection of the station to the electrical network are treated. The organization problems relevant to the station operation including personnel preparation and qualification, safety measures, are also illustrated. (author) [French] Le memoire donne des renseignements sur le demarrage de la premiere centrale nucleaire italienne, la centrale de Latina, dont la puissance electrique est de 200 MW et qui fonctionne avec un reacteur du type uranium naturel-gaz-graphite. Apres une breve description des caracteristiques essentielles de la centrale, des explications detaillees sont donnees sur les resultats des derniers essais auxquels elle a ete soumise, sur le chargement du combustible et sur la serie des operations de mise en service, des mesures et des verifications auxquelles il a ete procede lorsque l'etat critique a ete atteint. Les operations de demarrage et de raccordement de la centrale au reseau electrique sont etudiees dans le memoire, ainsi que les problemes d'organisation que pose l 'exploitation de la centrale, notamment en ce qui concerne la formation du personnel et les mesures de securite. (author) [Spanish] Se comunican datos sobre la puesta en marcha de la primera central nucleoelectrica italiana, en Latina, proyectada para desarrollar una potencia de 200 MW (e), que se basa en un reactor de uranio natural moderado por grafito u refrigerado por gas. Despues de describir brevemente las caracteristicas de la central, se dan detalles sobre el

Design and construction of a live insulator washing system for transformers; Diseno y construccion de un sistema de lavado en vivo para los aisladores de transformadores

Energy Technology Data Exchange (ETDEWEB)

Lizama-Camara, Y.A. [Universidad Veracruzana, Veracruz (Mexico)]. E-mail: yahir_lizama@ieee.org; Mendieta-Antunez, J.A.; Blanco-Brisset, E. [Industrias IEM, Tlalnepantla, Estado de Mexico (Mexico)]. E-mail: unamanu@hotmail.com; Olivares Galvan, J.C.; Escarela-Perez, R. [Universidad Autonoma Metropolitana, Unidad Azcapotzalco, Mexico, D.F. (Mexico)]. E-mails: jolivare_1999@yahoo.com; r.escarela@ieee.org

2012-04-15

Through the electrical industry history there have been developments of different cleaning methods to avoid the insulators flashover s due to pollution. This paper describes the principal cleaning methods applicable to transformers insulators, emphasizing the high pressure fixed-type live insulator washing method, which was applied for cleaning the insulators of 900 MVA transformer bank of the Laguna Verde power plant localized at the state of Veracruz in Mexico. We propose a transformer insulator cleaning methodology, which identifies the main variables to take into account (the voltage level of the transformers, the pollution level of the insulators, determination of the optimal wash time, the amount of water, the optimal pressure of water jet, the maximum conductivity of the water and the wind velocity), reference values are given for these variables. In addition, we present an economic cost analysis when applying a method of this kind in an electric substation. [Spanish] A lo largo de la historia de la industria electrica se han desarrollado diferentes metodos de limpieza para evitar las fallas de los aisladores de los transformadores debido a la contaminacion. Este articulo describe los principales metodos de limpieza aplicables a los aisladores de transformadores, enfatizando el sistema de lavado en vivo tipo fijo con agua a alta presion, metodo que fue aplicado para realizar la limpieza de los aisladores en el banco de transformadores de 900 MVA de la central electrica Laguna Verde, ubicada en el estado de Veracruz, en Mexico. Se propone una metodologia para la limpieza de los aisladores de transformadores, donde se identifican las principales variables a tomar en cuenta (el nivel de tension de los transformadores, nivel de contaminacion de los aisladores, determinacion del tiempo optimo de lavado, cantidad de precipitacion de agua, presion optima del chorro de agua, maxima conductividad del agua y las velocidades de los vientos) y se dan valores de

Analysis and adaptation of a mathematical model for the prediction of solar radiation; Analisis y adaptacion de un modelo matematico de prediccion de radiacion solar

Energy Technology Data Exchange (ETDEWEB)

Zambrano, Lorenzo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

There is an abundant, reliable, free, source of energy whose use can be planned and besides, practicably inexhaustible: the solar energy. In Mexico it constitutes an important resource, because of its geographical position; for this reason it is fundamental to know it well, either by means of measurements conducted for several years or by mathematical models. These last ones predict with meteorological variables, the values of the solar radiation with acceptable precision. At the Instituto de Investigaciones Electricas (IIE) a model is studied for the prediction of the solar radiation to be adapted to the local conditions of Mexico. It is used in simulation studies of the solar plants functioning and other solar systems. [Espanol] Existe una fuente de energia abundante, confiable, gratuita, cuyo uso puede planearse y, ademas, es practicamente inagotable: la solar. En Mexico constituye un recurso importante, por la posicion geografica del pais; por eso es fundamental conocerlo bien, ya mediante mediciones realizadas durante algunos anos, ya mediante modelos matematicos. Estos ultimos predicen, con datos de variables meteorologicas, los valores de la radiacion solar con precision aceptable. En el Instituto de Investigaciones Electricas (IIE) se estudia un modelo de prediccion de radiacion solar para adaptarlo a las condiciones locales de Mexico. Se usa en estudios de simulacion del funcionamiento de plantas helioelectricas y otros sistemas solares.

Analysis and adaptation of a mathematical model for the prediction of solar radiation; Analisis y adaptacion de un modelo matematico de prediccion de radiacion solar

Energy Technology Data Exchange (ETDEWEB)

Zambrano, Lorenzo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

There is an abundant, reliable, free, source of energy whose use can be planned and besides, practicably inexhaustible: the solar energy. In Mexico it constitutes an important resource, because of its geographical position; for this reason it is fundamental to know it well, either by means of measurements conducted for several years or by mathematical models. These last ones predict with meteorological variables, the values of the solar radiation with acceptable precision. At the Instituto de Investigaciones Electricas (IIE) a model is studied for the prediction of the solar radiation to be adapted to the local conditions of Mexico. It is used in simulation studies of the solar plants functioning and other solar systems. [Espanol] Existe una fuente de energia abundante, confiable, gratuita, cuyo uso puede planearse y, ademas, es practicamente inagotable: la solar. En Mexico constituye un recurso importante, por la posicion geografica del pais; por eso es fundamental conocerlo bien, ya mediante mediciones realizadas durante algunos anos, ya mediante modelos matematicos. Estos ultimos predicen, con datos de variables meteorologicas, los valores de la radiacion solar con precision aceptable. En el Instituto de Investigaciones Electricas (IIE) se estudia un modelo de prediccion de radiacion solar para adaptarlo a las condiciones locales de Mexico. Se usa en estudios de simulacion del funcionamiento de plantas helioelectricas y otros sistemas solares.

Determination of heat losses in the Cerro Prieto, Baja California, geothermal field steam transportation network based on the thermal insulation condition of the steam pipelines; Determinacion de perdidas de calor en la red de transporte de vapor del campo geotermico de Cerro Prieto, Baja California, con base en el estado fisico del aislamiento termico de vaporductos

Energy Technology Data Exchange (ETDEWEB)

Ovando Castelar, Rosember; Garcia Gutierrez, Alfonso; Martinez Estrella, Juan Ignacio [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: rovando@iie.org.mx; Canchola Felix, Ismael; Jacobo Galvan, Paul; Miranda Herrera, Carlos; Mora Perez, Othon [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia General de Cerro Prieto, Mexicali, B.C. (Mexico)

2011-07-15

In Cerro Prieto Geothermal Field (CPGF), the steam from producing wells is transported to power plants through a large and complex system of pipes thermally insulated with a 2 inches thick mineral wool or a fiber glass layer and an external aluminum or iron cover. The insulation material has been exposed to weather conditions during the field operation and has suffered density and thickness changes. In some cases the insulation has been lost completely, increasing heat transfer from the pipes to the environment. This paper analyzes the impact of the conditions of thermal insulation on heat losses in the CPGF steam-pipeline network. The heat losses are calculated by applying an iterative method to determine the surface temperature based on a heat balance calculated from the three basic mechanisms of heat transfer: conduction, convection, and radiation. Finally, using length and diameter data corresponding to the condition of the thermal insulation of each pipeline-and field operation data, the overall heat losses are quantified for steam lines throughout the pipeline network in the field. The results allow us to evaluate the magnitude of the heat losses in comparison with the overall energy losses occurring during steam transport from wells to the power plants. [Spanish] En el Campo Geotermico de Cerro Prieto (CGCP), BC, el transporte de vapor desde los pozos hasta las plantas generadoras de electricidad se lleva a cabo mediante un extenso y complejo sistema de tuberias que tipicamente se encuentran aisladas termicamente con una capa de 2 pulgadas de material aislante a base de lana mineral o fibra de vidrio, y una proteccion mecanica de aluminio o hierro galvanizado. Debido a la exposicion a las condiciones meteorologicas a traves del tiempo de operacion del campo, el aislamiento ha experimentado cambios en su densidad y espesor y en ocasiones se ha perdido por completo, lo cual repercute en una mayor transferencia de calor de las tuberias hacia el medio ambiente

End uses of electric energy in homes of a group of dwellings; Usos finales de la energia electrica en hogares de un conjunto habitacional

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E.; Romero Cortes, J.; Alarcon Maldonado, E.; Silva Oliver, J.; Ortiz Segura, J.; Vargas Rubio, J. [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1997-12-31

). El analisis de la informacion permite conocer la capacidad de consumo de energia electrica que tienen las viviendas de la muestra y a hacer inferencias de la capacidad de consumo de la unidad habitacional.

End uses of electric energy in homes of a group of dwellings; Usos finales de la energia electrica en hogares de un conjunto habitacional

Energy Technology Data Exchange (ETDEWEB)

Campero Littlewood, E; Romero Cortes, J; Alarcon Maldonado, E; Silva Oliver, J; Ortiz Segura, J; Vargas Rubio, J [Departamento de Energia, Universidad Autonoma Metropolitana - Unidad Azcapotzalco, Mexico, D. F. (Mexico)

1998-12-31

). El analisis de la informacion permite conocer la capacidad de consumo de energia electrica que tienen las viviendas de la muestra y a hacer inferencias de la capacidad de consumo de la unidad habitacional.

Energy saving in the pumping of drinking water, Municipality of San Felipe, Guanajuato; Ahorro de energia electrica en bombeo de agua potable, en el municipio de San Felipe, Gto.

Energy Technology Data Exchange (ETDEWEB)

Gamiz Sanchez, Lorenzo [Applied Technology Center de Mexico, S.A. de C.V. (Mexico)

2006-01-15

This paper shows the results attained in energy saving through a project of potable water pumping, which took an investment of $433,043.00 and an internal rate of return of 126%. This project puts into evidence that it is possible to reduce between 15 and 30% of the total invoicing for energy consumption in potable water pumping if an equipment of poor efficiency is replaced by another of high efficiency. The project was requested by the Guanajuato's State Water Comision and the Municipal Bureau of Sewage and Potable Water, with the double intention of reducing the energy consumption along with the corresponding invoicing and incrementing the output of the wells in order to improve the potable water supply. In the site two high efficiency submersible motor-pumps were installed previously to the energy diagnosis that triggered profitable operation results and a convenient invoicing. [Spanish] Se documentan los resultados obtenidos en un proyecto de ahorro de energia en el bombeo de agua potable realizado con una inversion de $433,043.00 y con una tasa interna de retorno de 126%. Este proyecto pone en evidencia que es posible reducir entre el 15 y 30% de la facturacion total por consumo de energia electrica en el bombeo de agua potable si se sustituye un equipo poco eficiente por otro de alta eficiencia. El proyecto fue solicitado por la Comision Estatal del Agua de Guanajuato y la Junta Municipal de Agua Potable y Alcantarillado del municipio, con un doble proposito, reducir el consumo de energia junto con la facturacion correspondiente e incrementar la capacidad de produccion de los pozos con la intencion de mejorar el abasto de agua potable. En el lugar se instalaron dos motobombas sumergibles de alta eficiencia previo diagnostico energetico que desencadenaron rentables resultados operativos y de facturacion.

Impact of a PV system interconnected to the electric network of a High Consumption Domestic user's demand in BCS; Impacto de un sistema fotovoltaico interconectado a red en la demanda electrica de un usuario DAC en BCS

Energy Technology Data Exchange (ETDEWEB)

Jimenez Grajales, H. R.; Agredano Diaz, Jaime; Gonzalez Galarza, R.; Munguia del Rio, G. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2010-11-15

In Mexico, the incident solar radiation is high enough, that encourage its use both to produce process heat or electricity trough solar cells in autonomous configurations or grid. In European countries with substantially lower irradiation levels such as Germany or Spain. PV Grid Connected Systems (PVGCS) are a mature technology that is widely used in these countries, mainly due to tax incentives and preferential feed in tariffs schemes. Of the benefits that electricity production modality provides both the user and to the electricity grid and also the technical benefits for the utilities for incorporating distributed generation at its distribution system. In Mexico, more and more people are motivated to invest in this type of technology. This article analyzes the particular case of a user that is classified as High Consumption Domestic Customer (HCDC) in the city of La Paz, Baja California Sur, Mexico, who owns a single phase of 6 kWp PVGCS installed on the roof of her house. The reported results in this paper come from data analyzed by the Electrical Research Institute (IIE) for a three year monitoring period. The paper includes meteorological information, energy and power balances, maximum power, standard production, system losses, efficiency of the photovoltaic generator and inverters, among other performance information. The document highlights the impact that the PV system on electricity consumption user billing from the utility, and some recommendations are provided on what must be done in order get out from the HCDC classification and the economic benefits of it. [Spanish] En Mexico se tienen niveles de irradiacion solar suficientemente altos que desde un punto de vista puramente energetico alientan a su aprovechamiento en la produccion de electricidad, ello mediante sistemas fotovoltaicos directamente conectados a la red electrica convencional (SFVI). En paises europeos con niveles de irradiacion sustancialmente inferiores - i.e. Espana o Alemania- esta

Determination of leveled costs of electric generation for gas plants, coal and nuclear; Determinacion de costos nivelados de generacion electrica para plantas de gas, carbon y nucleares

Energy Technology Data Exchange (ETDEWEB)

Alonso V, G.; Palacios H, J.C.; Ramirez S, J.R.; Gomez, A. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: galonso@nuclear.inin.mx

2005-07-01

The present work analyzes the leveled costs of electric generation for different types of nuclear reactors known as Generation III, these costs are compared with the leveled costs of electric generation of plants with the help of natural gas and coal. In the study several discount rates were used to determine their impact in the initial investment. The obtained results are comparable with similar studies and they show that it has more than enough the base of the leveled cost the nuclear option it is quite competitive in Mexico. Also in this study it is also thinks about the economic viability of a new nuclear power station in Mexico. (Author)

ENFOQUE MULTIOBJETIVO DE LA MEJORA DE LA EFICIENCIA DE CENTRALES ELECTRICAS: ANALISIS ENERGETICO Y ECONOMICO

Directory of Open Access Journals (Sweden)

Ruiz, Ana B.

2014-06-01

Full Text Available The auxiliary services of power plants have raised their energy consumption given that, nowadays, power plants usually operate at partial loads. This paper presents a multiple criteria study about the efficiency improvement of the auxiliary services through a series of strategies. Besides the energy savings, two economic criteria are considered: the economic investment required and the Internal Rate of Return to maximize the profitability of the investment. In order to solve this multiobjective problem, we have developed a scheme which combines several approaches in order both to make use of the main advantages of each method and to progressively adapt the solution process to the decision maker’s preferences. Finally, we solve the multiobjective problem associated to a real case study using the scheme designed. With this case study, we show the usefulness of the scheme proposed, and we highlight the importance of an understandable feedback and an adaptive process.

Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

Energy Technology Data Exchange (ETDEWEB)

Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2007-07-01

The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

Hybrid system of generating electricity, solar eolic diesel San Juanico, Baja California Sur, Mexico; Sistema hibrido de generacion electrica, eolico solar diesel San Juanico, Baja California Sur, Mexico

Energy Technology Data Exchange (ETDEWEB)

Huerta, Javier [Comision Federal de Electricidad, La Paz, Baja California Sur (Mexico); Johnston, Peter [Technology Development, Arizona (United States); Napikoski, Chester [Generation Engineering, Arizona (United States); Escutia, Ricardo [Comision Federal de Electricidad, Baja California Sur (Mexico)

2000-07-01

that is generated thru the selling of electric energy, guarantees the sustainable operation of the system. [Spanish] La Comision Federal de Electricidad (CFE), y la empresa electrica norteamericana Arizona Public Service (APS), firmaron un convenio de colaboracion para desarrollar un proyecto de generacion de energia electrica con la utilizacion de energias renovables. Las premisas que se acordaron fueron las siguientes: 1. Enfoque del proyecto hacia una comunidad rural. 2. El costo de la obra debera ser menor al de su interconexion con el sistema convencional. 3. Aceptacion por parte de la comunidad, y autoridades gubernamentales. 4. Sustentabilidad de la operacion del sistema. Se efectuaron diversos analisis tecnicos y economicos asi como la evaluacion del recurso solar y eolico, estudio de impacto ambiental, plan de negocios para obtener la aprobacion de los recursos economicos ante instancias como Niagara Mohawk (NIMO), y la USAID, mediante la supervision de los Laboratorios Nacionales de Sandia. Despues de efectuarse las mediciones anemometricas y de radiacion solar, en diversas comunidades, se considero a la comunidad de San Juanico como la mas viable; tambien los aspectos de logistica, sociales, tamano de la comunidad y como detonador para las actividades economicas como la pesca y el turismo. La APS llevo a cabo el proyecto ejecutivo de conformidad con las recomendaciones de la Comision Federal de Electricidad. El proyecto consistio basicamente en la instalacion de 10 aerogeneradores de 10 Kw. c/u, un arreglo solar de 17 Kw., un inversor de 70 Kw., un banco de baterias de 432 Kwh., mas un motogenerador diesel de emergencia de 80 Kw. Ademas de la obra civil y electromecanica. Fue necesario involucrar a la poblacion en el conocimiento y seguimiento del proyecto desde sus inicios, ya que consideramos que este factor seria indispensable para lograr el exito del mismo. Se instalaron lamparas ahorradoras de energia en viviendas y alumbrado publico para optimizar el

Design, test and start up of a cleaning system for the moderator tank bottom of Atucha I Nuclear Power Plant

International Nuclear Information System (INIS)

Duca, J.; Gerber, O.; Ibero, M.; Riga, N.

1989-01-01

In order to perform the cleaning of the moderator tank bottom, during the repair of the Atucha I nuclear power plant (CNA I) failure, the Empresa Nuclear Argentina de Centrales Electricas (ENACE S.A.) designed a system with the following requirements (asked by CNA I): a) To aspirate and retain free solid particles, uranium dioxide pellets and coolant channels isolations (foils) of minor size settled at the moderator tank bottom, being the reactor at middle loop state. b) To allow a radially cleaning up to 1.4 m from the extracted channel. c) To design a lay-out attaining the ALARA dose exposure. The designed system basically consists in: a) Flexible intake for suction: allows the movement inside the moderator tank and provides the adequate speed to raise the particles. b) Filter: retains the aspirated particles, pellets and foils. Its capacity is 1.8 dm 3 and the minimum size of retained particles is 200 m. The ALARA dose exposure concept is attained due to that the filter is located inside the moderator tank. c) Filtering column: contains the filter and allows the entrance of the extraction and exchange tool (for the flexible intake and filter). d) Suction hose: connects the filtering column with the pump. Its flexibility allows its use in any channel maintaining the same positions of the discharge pump and the return piping. e) Discharge pump: it is a canned centrifugal pump with low-low net positive suction head. f) Return piping: discharges the filtered water into the moderator tank. The system fulfilled satisfactorily all requirements during its operation. (Author)

Technological tendencies and their relation with energy markets; Tendencias tecnologicas y su relacion con mercados de energia

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Castro, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article some associate technological tendencies with areas of interest of the Control Systems Division of the Instituto de Investigaciones Electricas (IIE) are presented. Here the relations or influence that these tendencies have and will continue having in the future with the definition and implantation of energy markets are mentioned. [Spanish] En este articulo se presentan algunas tendencias tecnologicas asociadas con areas de interes de la Division de Sistemas de Control del Instituto de Investigaciones Electricas (IIE). Aqui se mencionan las relaciones o influencia que dichas tendencias tienen y continuaran teniendo en el futuro con la definicion e implantacion de mercados de energia.

Experimental analysis of the environmental contamination of electrical equipment; Analisis experimental de la contaminacion ambiental en equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Campillo Ruiz, Maria Teresa; Ponce Velez, Marco Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

This paper is a summary of the main causes that originate the contamination problems in insulating materials. This as the result of different studies performed in experimental testing stations, as well as in transmission, distribution and laboratory power lines by the Departamento de Materiales of the Instituto de Investigaciones Electricas (IIE). [Espanol] En el presente trabajo se muestra un resumen de los principales factores que originan los problemas de contaminacion en aislamientos. Esto, como resultado de diversos estudios realizados tanto en estaciones de prueba experimentales como en lineas de transmision, distribucion y laboratorio por el Departamento de Materiales del Instituto de Investigaciones Electricas (IIE).

Experimental analysis of the environmental contamination of electrical equipment; Analisis experimental de la contaminacion ambiental en equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Campillo Ruiz, Maria Teresa; Ponce Velez, Marco Antonio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

This paper is a summary of the main causes that originate the contamination problems in insulating materials. This as the result of different studies performed in experimental testing stations, as well as in transmission, distribution and laboratory power lines by the Departamento de Materiales of the Instituto de Investigaciones Electricas (IIE). [Espanol] En el presente trabajo se muestra un resumen de los principales factores que originan los problemas de contaminacion en aislamientos. Esto, como resultado de diversos estudios realizados tanto en estaciones de prueba experimentales como en lineas de transmision, distribucion y laboratorio por el Departamento de Materiales del Instituto de Investigaciones Electricas (IIE).

Paisajes de la crisis: problemas y oportunidades

Directory of Open Access Journals (Sweden)

Emilia Román López

2015-06-01

Estas urbanizaciones y edificios fantasma están presentes en gran diversidad de paisajes de la Península, sobre todo en áreas del litoral pero también en el interior, ubicadas generalmente en terrenos próximos a pueblos y ciudades de nuestra geografía, e incluso en parques y parajes naturales que gozaban de protecciones de escala nacional e internacional.

Memorias del tercer simposio internacional sobre economía, planificación, y políticas de los incendios forestales: problemas y enfoques comunes

Science.gov (United States)

Armando González-Cabán

2009-01-01

Estas memorias resumen el resultado de un simposio diseñado para discutir los problemas actuales que confrontan las agencias con responsabilidad para la proteccion contra incendios forestales a nivel federal y estadual en los EE.UU., al igual que agencias en la comunidad internacional. Los temas discutidos en el simposio incluyen economía del fuego, teoría y modelos...

San Juanico, BCS, Mexico, hybrid electric plant renewable energies in the rural communities development; Planta electrica hibrida San Juanico, B.C.S., Mexico, las energias renovables en el desarrollo de las comunidades rurales

Energy Technology Data Exchange (ETDEWEB)

Lopez Rios, Serafin [Gerencia de Proyectos Geotermoelectricos, Comision Federal de Electricidad (Mexico)

1999-08-01

The hybrid electric plant of San Juanico, B.C.S., Mexico, is described in terms of its environmental goals, operating process and contribution to the development of that rural community of the Baja California Peninsula. San Juanico hybrid electric plant is organized in three electrical generation systems that work in parallel: one uses solar energy, another wind energy and a third one uses diesel fuel. [Spanish] Se describe la planta hibrida de San Juanico, BCS, Mexico, en terminos de los objetivos ambientales que condujeron a su realizacion, asi como de su proceso operativo y de la participacion que tiene en el desarrollo de esa comunidad rural de la peninsula de Baja California, Mexico. La planta hibrida de San Juanico esta constituida por tres sistemas de generacion de electrcicidad que operan en paralelo: uno utiliza energia radiante del sol, otro energia del viento y un tercero utiliza diesel.

Guidance for DoD Utilization of Host Nation Power

Science.gov (United States)

2015-10-28

data)  The Honduran electric company,  Empresa  Nacional  de  Energia Electrica (ENEE) generates power and  operates the national transmission and...CDF  Cumulative Distribution Function  DoD  Department of Defense  ENEE  Empresa  Nacional  de  Energia Electrica  EUPW  Escalating Uniform Present Worth...generators with the fuel either purchased from the local  population or  transported  from remote fuel depots.  This incurs a significant cost for the

Recommendations guide for the correct prescription's tests of diagnosis by image; Guia de recomendaciones para la correcta solicitud de pruebas de diagnostico por imagen

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The purpose of this guide is to protect the health of the population against the dangers of ionizing radiation. The unjustified studies involving exposure to radiation unnecessarily increases the cancer risk in the exposed population. Medical irradiations are the most important contribution to human exposure to ionizing radiation from artificial character. Since statistics indicate a growing trend in the number of practices as well as the number of facilities, the quality of those practices, its justification and its optimization are today a relevant topic to scientific societies and regulatory agencies. Since the adoption of the directive 97/43/EURATOM, and the realization of the Conference of Malaga most European countries have implemented action plans for radiation protection of patients, including the search for consensus on the optimization dose criteria and justification for the indication of the examinations. An example is the PR/118 guide for diagnosis studies requests. In this framework, two Conferences on Radiation Protection of Patient were held in our country in which 'Working Groups' were organized on the following topics: Radiodiagnosis, Radiotherapy, Nuclear Medicine and Radioprotection of the Pregnant Woman. Systematic actions that received strong institutional support of the Argentine Society of Radiology began and ended with the elaboration of a 'Program for Radiological Protection Patient' which is being implemented. [Spanish] El objetivo de esta Guia es la proteccion de la salud de la poblacion frente a los riesgos derivados de las radiaciones ionizantes. La realizacion injustificada de estudios que impliquen exposicion a la radiacion aumenta innecesariamente el riesgo de cancer en la poblacion expuesta. Las irradiaciones medicas son la contribucion mas importante a la exposicion humana a las radiaciones ionizantes de caracter artificial. Ya que las estadisticas indican una tendencia creciente en el numero de practicas asi como la cantidad de

The evolution of the Luz y Fuerza del Centro substations. Volume 2; Evolucion de las subestaciones de Luz y Fuerza del Centro. Volumen 2

Energy Technology Data Exchange (ETDEWEB)

Carranza Ramirez, Sergio [Luz y Fuerza del Centro, Mexico, D. F. (Mexico)

1997-12-31

This document cites historical background of how the Luz y Fuerza del Centro substations have evolved up to nowadays. A brief description is made of one electric substation, the substation design criteria are mentioned, since it must comply with the requirements of reliability, service continuity, service quality, economy, geographical location, just for mentioning some of them. The more utilized arrangements of the Luz y Fuerza del Centro substations are described. In the same manner, the remote control substations are described mentioning the main elements of this type of substations. Mention is made also of the technological incorporations that have been made to the substations and the perspectives there are from these. One line diagrams of the electric substations are shown, as well as from power plant substations [Espanol] Este documento cita antecedentes historicos de como han evolucionando las subestaciones de Luz y Fuerza del Centro hasta hoy en dia. Se realiza una breve descripcion de una subestacion electrica, se mencionan los criterios de diseno de una subestacion, ya que debe cumplir con los requisitos de confiabilidad, continuidad, calidad del servicio, economia, situacion geografica, por mencionar algunos de estos. Se describen los arreglos de las subestaciones mas utilizados por Luz y Fuerza del Centro. De igual manera se describen las subestaciones telecontroladas mencionando los principales elementos de este tipo de subestaciones. Se mencionan las incorporaciones tecnologicas que se han realizado a las subestaciones y las perspectivas que se tienen de estas. Se muestran diagramas unifilares de subestaciones electricas, al igual que se muestran las plantas de las subestaciones

On-line monitoring for the detection and prevention of faults in the power transformers; Monitoreo en linea para la deteccion y prevencion de fallas en transformadores de potencia

Energy Technology Data Exchange (ETDEWEB)

Lopez Tagle, Alfredo; Equihua Tapia, Hugo [Comision Federal de Electricidad (Mexico); Linan Garcia, Roberto; Pascacio de los Santos, Alberth; Nunez Dominguez, Arturo [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

Power transformers are held to thermal, electrical and mechanical efforts, which degrade the isolation system oil/paper. So that to detect incipient degradations in transformers with more than 25 years of service installed in the transmission network of Commission Federal de Electricidad (CFE). The Instituto de Investigaciones Electricas (IIE), developed and installed six on-line Monitoring Systems for Power Transformers (SMLTP). The systems are installed at the substations Puebla II, banks AT-1 and AT-2, Malpaso II, bank, AT-1 and phase B of bank AT-1 of the electrical substation Villa de Garcia. [Spanish] Los transformadores de potencia estan sujetos a esfuerzos termicos, electricos y mecanicos, los cuales degradan el sistema de aislamiento aceite/papel. De modo que con el proposito de detectar degradaciones incipientes en transformadores con mas de 25 anos de servicio instalado en la red de transmision de la Comision Federal de Electricidad (CFE). El Instituto de Investigaciones Electricas (IIE), desarrollo e instalo seis Sistemas de Monitoreo en Linea para Transformadores de Potencia (SMLTP). Los sistemas se encuentran en las subestaciones Puebla II, bancos AT-1 y AT-2, Malpaso II, banco, AT-1 y fase B del banco AT-1 de la subestacion electrica Villa de Garcia.

Code for the steam tables for pure water in visual basic 6.0.; Un codigo para las tablas de vapor para agua pura en visual basic 6.0

Energy Technology Data Exchange (ETDEWEB)

Verma, Mahendra P. [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

The thermodynamic data of the water are of extreme importance in all of the branches of science and technology; the facilitate the understanding of the natural Earth processes. Nevertheless, for the electrical industry the water plays a very important role during the generation of electrical energy process. Different heat sources such as coal, oil, natural gas, nuclear fuel or the geothermal heat boil the water that forms the steam used to move the turbines. Consequently, the steam tables (the thermodynamic water data) are vital to model thermal and mass transference and physical-chemical processes during the generation of electrical energy. [Spanish] Los datos termodinamicos del agua son de suma importancia en todas las ramas de la ciencia y tecnologia, ellos facilitan el entendimiento de los procesos naturales de la Tierra. Sin embargo, para la industria electrica el agua juega un papel muy importante durante el proceso de generacion de energia electrica. Diferentes fuentes de calor tales como carbon, aceite, gas natural, combustible nuclear o el calor geotermico calientan el agua que forma el vapor utilizado para mover las turbinas. Luego entonces, las tablas de vapor (los datos termodinamicos de agua) son vitales para modelar transferencia termica y de masa y procesos fisico-quimico durante la generacion energia electrica.

Palomares Summary Report

Science.gov (United States)

1975-01-15

Navascues , President of the Junta de Energia Nuclear OEN), discussed the radiation situation and recovery operations with newsmen. A lengthy article was...allegations of the ILTA SANOMAT story. 204 SECTION7 SUBSEQUENT BIOMEDICAL AND ENVIRONMENTAL FACTORS The fact that Junta de Energia Nuclear (TEN...Palomares incident. The program was to be strictly under the direction of the Junta de Energia Nuclear’s Division de Medicine y Proteccion (Dr. Eduardo

Plant host finding by parasitic plants: a new perspective on plant to plant communication.

Science.gov (United States)

Mescher, Mark C; Runyon, Justin B; De Moraes, Consuelo M

2006-11-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-documented examples of plant-to-plant communication via volatiles, and the ecological significance of such interactions has been much debated. To date, nearly all studies of volatile-mediated interactions among plant species have focused on the reception of herbivore-induced volatiles by neighboring plants. We recently documented volatile effects in another system, demonstrating that the parasitic plant Cuscuta pentagona uses volatile cues to locate its hosts. This finding may broaden the discussion regarding plant-to-plant communication, and suggests that new classes of volatile-meditated interactions among plant species await discovery.

Diagnosis system for nozzles in high voltage equipment; Sistema de diagnostico para boquillas en equipos de alta tension

Energy Technology Data Exchange (ETDEWEB)

Ramirez Nino, Jose; Escorsa Morales, Oscar [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Lopez Azamar, Ernesto [Comision Federal de Electricidad (Mexico)

2000-07-01

The nozzles used in high voltage electrical equipment, such as power transformers and circuit breakers, constitute the elements that present greater fault risk. On the other hand, the faults in the nozzles cause, in most of the cases catastrophic damages, that expose to risk the maintenance personnel of the plant and the peripheral equipment. With the purpose of contributing with on-line monitoring techniques that indicate the nozzles condition and allow to anticipate their possible fault, the Instituto de Investigaciones Electricas (IIE) performed for the laboratory of tests of equipment and materials (LAPEM) of Comision Federal de Electricidad (CFE), a project for the development of a system for the measurement of capacitive currents in these equipments. This system allows to determine the variation in capacitance and dielectric losses, and to determine the presence of internal partial discharges in nozzles of 115, 230 and 400 kV. With this information it is possible to determine the condition of the internal isolation of the nozzles and retire them from service before deterioration takes place that puts in danger the integrity of the equipment. The management of electrical equipment of the Instituto de Investigaciones Electricas developed for LAPEM a system that measures capacitive currents of power transformer nozzles. This system was designed with the purpose of installing it in a transformer of a 400 kV machine, in the fossil power station of Tula, Hidalgo, of the Comision Federal de Electricidad. [Spanish] Las boquillas empleadas en los equipos electricos de alta tension, como transformadores de potencia e interruptores, constituyen los elementos que presentan mayor riesgo de falla. Por otro lado, las fallas en las boquillas provocan en la mayoria de los casos danos catastroficos que ponen en riesgo al personal de mantenimiento de la planta y al equipo periferico. Con la finalidad de aportar tecnicas de monitoreo en linea que indiquen el estado de las

IIE Bulletin: selected articles from 1993 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1989 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1990 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1993 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1992 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1995 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1989 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1985 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1986 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1987 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1997 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1996 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1991 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1991-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1997 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1996 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1990 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1987 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1992 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1986 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1995 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1991 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1988 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1985 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

IIE Bulletin: selected articles from 1994 issues of ``boletin iie``

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

Boletin IIE, produced by the Instituto de Investigaciones Electricas, is issued six times a year. Separate citations and abstracts have been prepared for individual articles in scope for the database.

Plant Host Finding by Parasitic Plants: A New Perspective on Plant to Plant Communication

OpenAIRE

Mescher, Mark C; Runyon, Justin B; De Moraes, Consuelo M

2006-01-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-documented examples of plant-to-plant communication via volatiles, and the ecological significance of such interactions has been much d...

Exploitation of biogas in municipal in slaughterhouses: Technical-economical evaluation; Aprovechamiento de biogas en rastros y mataderos municipales: Evaluacion tecnica-economica

Energy Technology Data Exchange (ETDEWEB)

Martinez Hernandez, Donaji A; Castaneda Sanchez, Arlem M; Garcia Galeana, Erika [Universidad Nacional Autonoma de Mexico (UNAM), Facultad de Ingenieria (Mexico)

2009-07-01

Nowadays the treatment of the solid and liquid remainders in the municipal slaughter houses is small because of the idea that the treatment is expensive; nevertheless, it is important to take advantage of them, since this can reduce to the environmental impacts they cause, as well as the discharge of greenhouse effect gas. The use of bio digesters for the treatment of these remainders has become an efficient process to avoid the exit of methane gas to the atmosphere, taking advantage of the biogas and other residues to produce electricity. The elaboration of a technical-economical evaluation of a pilot plant shows the costs of investment, maintenance, as well as the income that can be obtained by the total usage of these residues and the savings in the electrical power consumption. The analysis of this study demonstrates that the use of biogas through bio-digesters for the generation of electrical energy is a profitable option for the treatment of the residues, because the income by the sale of compost, blood flour, as well as the diminution of the electrical tariff, justifies the initial investment. These projects will be more attractive, if they use financing and are registered as MDL projects. [Spanish] Actualmente el tratamiento de los desechos solidos y liquidos en los rastros y mataderos municipales es poco pues se tiene la idea de que el tratamiento es costoso; sin embargo, es importante que se aprovechen ya que esto puede reducir los impactos ambientales que provocan, asi como la emision de gases de efecto invernadero. El uso de biodigestores para el tratamiento de estos desechos, se ha convertido en un proceso eficiente para evitar la salida de gas metano a la atmosfera, aprovechando el biogas y otros residuos para producir electricidad. La elaboracion de una evaluacion tecnica-economica de una planta piloto, muestra los costos de inversion, mantenimiento, asi como los ingresos que se pueden obtener por el aprovechamiento total de estos residuos y el

Research, development and technological innovation of wind turbine control systems; Investigacion, desarrollo e innovacion tecnologica de sistemas de control de aerogeneradores

Energy Technology Data Exchange (ETDEWEB)

Garduno Ramirez, Raul; Rodriguez Martinez, Arnulfo Antelmo; Sanchez Parra, Marino; Martinez Morales, Miguel Angel; Hernandez Cuellar, Maria Aurora; Alcaide Godinez, Indira Xochiquetzal; Re Lopez, Victor Genaro; Hernandez Gonzalez, Roberto [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2012-07-01

Control systems constitute the brain and the nervous system of modern machines, such as wind turbine generators (TGE by its acronym in Spanish). TGEs can work efficiently, safely and almost autonomously, thanks to the control systems with which they are equipped. Conversely, any malfunctioning of the control system may cause failure or damage of a component, a subsystem or even destruction of the TGE itself. This paper introduces some basic facts about generation of electric power from wind energy in the world and Mexico, wind turbogenerators and their most relevant technologies, TGE control systems, and R and TD+I about TGE control systems performed at the Instituto de Investigaciones Electricas. [Spanish] Los sistemas de control constituyen el cerebro y el sistema nervioso de las maquinas modernas, como aerogeneradores (AG). Los AG pueden trabajar eficiente, segura y casi autonomamente, gracias a los sistemas de control con los que estan equipados. De manera inversa, cualquier mal funcionamiento del sistema de control puede provocar falla o dano de un componente, subsistema o incluso la destruccion del propio AG. Este documento introduce algunos hechos basicos en torno a la generacion de energia electrica a partir de energia eolica en el mundo y Mexico, los aerogeneradores y sus tecnologias mas importantes, sistemas de control de AG e I+DT alrededor de los sistemas de control de AG realizados en el Instituto de Investigaciones Electricas.

Energy management system. Opti-dmaX Control; Sistema de administracion de energia. Control Opti-dmaX

Energy Technology Data Exchange (ETDEWEB)

Automatizacion, Productividad y Calidad S.A. de C.V. Puebla (Mexico)

2005-07-01

The electrical energy is an essential element in the activities of the present world. Optimizing its consumption represents a competitive advantage for the companies, since the operation costs would be reduced as well as the negative impact to the environment. In billing the electrical energy the tariffs consider: the consumption, the demand, the power and the schedule of use for the medium and large companies. With the Opti-dmaX system the necessary information for the correct administration of the electrical energy consumption is obtained from the measurement in the strategic points of the installation. At the same time, the processes and services are controlled, maintaining an efficient power operation that diminishes operative costs. [Spanish] La energia electrica es un elemento indispensable en las actividades del mundo actual, y optimizar su consumo, representa una ventaja competitiva para las empresas, ya que se consigue reducir los costos de operacion y el impacto al ambiente. En la facturacion de la energia electrica las tarifas consideran: el consumo, la demanda, la potencia y el horario de uso para las medianas y grandes empresas. Con el sistema Opti-dmaX se obtiene la informacion necesaria para la correcta administracion del consumo de energia electrica a partir de la medicion en los puntos estrategicos de la instalacion. A su vez, se controlan los procesos y servicios, manteniendo una operacion energetica eficiente que minimiza los costos operativos.

Plant host finding by parasitic plants: A new perspective on plant to plant communication

Science.gov (United States)

Mark C. Mescher; Justin B. Runyon; Consuelo M. De Moraes

2006-01-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-...

Electrical generation of nuclear origins in Spain 95/96; Generacion electrica de origen nuclear en Espana 95/96

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The paper presents nuclear programme of Spain and reviews the following issues: LWR plants in Spain; nuclear fuel cycle; fuel assemblies manufacturing; reload core engineering experience; fuel assemblies significant features; fuel rod failures causes; fuel related R and D projects and irradiation programs; high burnup fuel behaviour.

The SLIMITRE system: T-P-CCL registry in high temperature oil wells; El sistema SLIMITRE: registro T-P-CCL en pozos petroleros de alta temperatura

Energy Technology Data Exchange (ETDEWEB)

Iglesias R, Eduardo and others [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2001-07-01

PEMEX Exploration and Production (PEP), through its Management of Well Productivity of the Subdivision of Technology and Professional Development (GTDP) and of its Active Luna, faced the problematic of carrying out simultaneous recordings of temperature and pressure in high temperature flowing wells. Capitalizing the experience and know-how of the Gerencia de Geotermia (GG) of the Instituto de Investigaciones Electricas (IIE) in this field, it ordered the resolution of the described problematic, by means of the development of appropriate tools. In order to compliment this order, the GG of the IIE developed the SLIMETRE system, in close collaboration with the personnel of PEP involved in the project. This project framed in the Agreement of Collaboration for the rendering of services between PEMEX Exploration and Production and the Instituto de Investigaciones Electricas. In the sections that follow appear the main parameters of design, the architecture of the system is explained, the tools and the subsystem of data acquisition are described; the obtained results are exposed and the conclusions appear. [Spanish] Pemex Exploracion y Produccion (PEP), a traves de su Gerencia de Productividad de Pozos de la Subdireccion de Tecnologia y Desarrollo Profesional (GTDP) y de su Activo Luna, encaro la problematica de efectuar registros simultaneos de temperatura y presion en pozos fluyentes de alta temperatura. Capitalizando la experiencia y know-how de la Gerencia de Geotermia (GG) del Instituto de Investigaciones Electricas (IIE) en dicho campo, le encargo la resolucion de la problematica descrita, mediante el desarrollo de herramientas apropiadas. Para cumplimentar dicho encargo, la GG del IIE desarrollo el sistema SLIMETRE, en estrecha colaboracion con el personal de PEP involucrado en el proyecto. Este proyecto se enmarco en el Convenio de Colaboracion para la prestacion de servicios entre Pemex Exploracion y Produccion y el Instituto de Investigaciones Electricas. En

Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

Energy Technology Data Exchange (ETDEWEB)

Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

1986-12-31

A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

Optimum design of a self-supported power transmission tower type 2M2 for 230 kW; Diseno optimo de una torre de transmision autosoportada tipo 2M2, para 230 kW

Energy Technology Data Exchange (ETDEWEB)

Espejel Valdez, Eduardo [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Millan Monje, Alejandro; Honk Hernandez, Wenceslao [Comision Federal de Electricidad, (CFE), Mexico, D. F. (Mexico)

1985-12-31

A group of specialists from the Comision Federal de Electricidad (CFE) and of the Instituto de Investigaciones Electricas (IIE) analyzes the design of various types of power transmission towers in their application stage, in order to enhance them. In this article the structural characteristics of the self-supported tower type 2M2 for 230 kV of two circuits and of suspension, are presented. [Espanol] Un grupo de especialistas de la Comision Federal de Electricidad (CFE) y del Instituto de Investigaciones Electricas (IIE) analiza el diseno de diversos tipos de torres de transmision en su etapa de aplicacion, con el fin de mejorarlos. En este articulo se presentan las caracteristicas estructurales de la torre autosoportada tipo 2M2 para 230 kV, de dos circuitos y de suspension.

Electrorheologic fluids; Fluidos electroreologicos

Energy Technology Data Exchange (ETDEWEB)

Rejon G, Leonardo; Lopez G, Francisco; Montoya T, Gerardo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Manero B, Octavio [Instituto de Investigaciones en Materiales, UNAM.(Mexico)

2003-07-01

The present article has as an objective to offer a review of the research work made in the Instituto de Investigaciones Electricas (IIE) on the study of the electrorheologic fluids whose flow properties can abruptly change in the presence of an electric field when this is induced by a direct current. The electrorheologic fluids have their main application in the manufacture of self-controlling damping systems. [Spanish] El presente articulo tiene por objetivo ofrecer una resena de los trabajos de investigacion realizados en el Instituto de Investigaciones Electricas (IIE) sobre el estudio de los fluidos electroreologicos cuyas propiedades de flujo pueden cambiar abruptamente en presencia de un campo electrico cuando este es inducido por una corriente directa. Los fluidos electroreologicos tienen su principal aplicacion en la fabricacion de sistemas de amortiguamiento autocontrolables.

Plant stress signalling: understanding and exploiting plant-plant interactions.

Science.gov (United States)

Pickett, J A; Rasmussen, H B; Woodcock, C M; Matthes, M; Napier, J A

2003-02-01

When plants are attacked by insects, volatile chemical signals can be released, not only from the damaged parts, but also systemically from other parts of the plant and this continues after cessation of feeding by the insect. These signals are perceived by olfactory sensory mechanisms in both the herbivorous insects and their parasites. Molecular structures involved can be characterized by means of electrophysiological assays, using the insect sensory system linked to chemical analysis. Evidence is mounting that such signals can also affect neighbouring intact plants, which initiate defence by the induction of further signalling systems, such as those that increase parasitoid foraging. Furthermore, insect electrophysiology can be used in the identification of plant compounds having effects on the plants themselves. It has been found recently that certain plants can release stress signals even when undamaged, and that these can cause defence responses in intact plants. These discoveries provide the basis for new crop protection strategies, that are either delivered by genetic modification of plants or by conventionally produced plants to which the signal is externally applied. Delivery can also be made by means of mixed seed strategies in which the provoking and recipient plants are grown together. Related signalling discoveries within the rhizosphere seem set to extend these approaches into new ways of controlling weeds, by exploiting the elusive potential of allelopathy, but through signalling rather than by direct physiological effects.

Los derechos de autor en internet

Directory of Open Access Journals (Sweden)

Marcelo Bauzá

2014-10-01

Full Text Available Contenido: Un punto de partida: prudencia e interrogantes. La propiedad intelectual y su constante readaptación. El derecho autoral en breves trazos. La conmoción de internet. Tipología de obras autorales en el nuevo contexto. Problemas autorales relacionados con internet. Las protecciones técnicas. Propiedad intelectual y comercio electrónico. Regulaciones jurídicas incipientes. Las disidencias o alternativas a la P.I. en internet. Reflexiones finales

Metodología para determinar la respuesta de los descargadores gaseosos tripolares ante una tensión de impulso dinámico; Test Methodology for Determining the Tripolar Gaseous Discharges Response when a Dynamic Impulse Voltage Is Applied

Directory of Open Access Journals (Sweden)

José Á Martínez Barbado

2011-02-01

Full Text Available Las protecciones utilizadas contra las sobretensiones y sus efectos secundarios provocados por losfenómenos  electroatmosféricos,  son  de  vital  importancia  en  un  mundo  en  el  que  por  su  desarrollotecnológico, se requiere de protecciones con un alto nivel de fiabilidad. En este artículo se presenta unametodología para la ejecución del ensayo de tensión de impulso dinámico a descargadores gaseosostripolares que son utilizados para proteger las tarjetas de abonados contra sobretensiones, las cuales seinstalan en las plantas telefónicas del país. Dicha metodología se dirige a obtener y comprobar losvalores de tensión de corte y sus tolerancias con los especificados por el fabricante. Se realiza unestudio comparativo del comportamiento entre un grupo de descargadores nuevos y otro sin usar, a partirde una problemática concreta, con el valor de ruptura de corte dado por un fabricante y ante la aplicaciónde tensión de impulso dinámico. El análisis comparativo se lleva a cabo mediante la técnica estadísticade detección de diferencias estadísticamente significativas entre los valores medios de ruptura obtenidos.  The protection used against the overvoltage and their secondary effect produced by electro-atmosphericphenomena, results very important due to worldwide technologic development, therefore a protection witha high reliability level are required. This paper presents a methodology for carrying out the dynamicimpulse voltage test to tripolar gaseous discharges that are used to protect the subscribers' cards againstovervoltages, which are installed in the telephonic plant of the country. This methodology permits toobtain and check the disrupt voltage values and this tolerances in reference to the specified by themanufacturer. It is perform a comparative study of the behavior between a group of not used dischargesand other used, based in an actual doubtful, with the specified by the manufacturer and when

Plant-soil feedbacks: role of plant functional group and plant traits

NARCIS (Netherlands)

Cortois, R.; Schröder-Georgi, T.; Weigelt, A.; van der Putten, W.H.; De Deyn, G.B.

2016-01-01

Plant-soil feedback (PSF), plant trait and functional group concepts advanced our understanding of plant community dynamics, but how they are interlinked is poorly known. To test how plant functional groups (FGs: graminoids, small herbs, tall herbs, legumes) and plant traits relate to PSF, we grew

Internal Arc: People safety in the electrical wiring; Arco interno: Seguridad de las personas ante instalaciones electricas

Energy Technology Data Exchange (ETDEWEB)

Inchausti, J. M.

2009-07-01

The aim of this article is to describe the internal arc phenomenon, an extremely fast, almost explosive and unattended process of transformation form an initial electric power to the generation of a pressure and heat wave inside the medium its produced its consequences for safety, current methods of limiting them and current regulations in general for equipment used in medium-voltage electrical distribution networks. Taking into account that this type of equipment is found thought the distribution network in both public buildings and unrestricted access areas, safety (of operators and the general public) must be taken into account in the design of equipment and installations to minimize the risk of internal arcs occurring. This is the gist of, for example, ITC 16 of the Spanish Regulation on Power Plants and transformer substations. In addition to the construction aspects specific to each device in which the manufacturer has to takes steps to minimize the risks of an internal arcs occurring. This is the gist of, for example, ITC 16 of the Spanish Regulation on Power Plants and transformer substations. In addition to the construction aspects specific to each device in which an internal arc occurring, it is understood to be vitally important that users, installers and designers of Medium Voltage installations are familiar with the installation conditions stated by the manufacturer and thus avoid risks. (Author) 14 refs.

LNG plant combined with power plant

Energy Technology Data Exchange (ETDEWEB)

Aoki, I; Kikkawa, Y [Chiyoda Chemical Engineering and Construction Co. Ltd., Tokyo (Japan)

1997-06-01

The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs.

LNG plant combined with power plant

International Nuclear Information System (INIS)

Aoki, I.; Kikkawa, Y.

1997-01-01

The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1993-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

Evaluation of the national cogeneration potential as an option for the expansion of the national electric system; Evaluacion del potencial nacional de cogeneracion como opcion en la expansion del sistema electrico nacional

Energy Technology Data Exchange (ETDEWEB)

Nieva Gomez, Rolando; Hernandez Galicia, Julio Alberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Portes Mascorro, Enrique; Alvarez Chavez, Jose Maria [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1997-12-31

The Comision Nacional para el Ahorro de Energia (CONAE) carried out a study to determine the amount of electric energy available by cogeneration in the industrial sector of our country. This study is based in a survey among the enterprises with the largest fuel consumption belonging to the industrial and commercial sectors and to the petrochemical branch of Petroleos Mexicanos (PEMEX). The results of the study are presented, which show the location of the cogeneration potential by the following estimates: a) The scenario under a potential of 5770 MW to generate annually 4.55 x 107 MWh of electric energy. b) The scenario with a potential of 10819 MW to generate annually 9.47 x 107 Mwh of electric energy [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) llevo acabo un estudio para determinar la cantidad de energia electrica disponible por cogeneracion en el sector industrial de nuestro pais. El estudio se fundamenta en una encuesta entre las empresas con mayor consumo de combustibles pertenecientes a los sectores industrial y comercial y al ramo petroquimico de Petroleos Mexicanos (PEMEX). Se presentan los resultados del estudio, el cual muestra la ubicacion del potencial de cogeneracion por los siguientes estimados: a) El escenario bajo con un potencial de 5770 MW para producir anualmente 4.55 x 107 Mwh de energia electrica. b) El escenario alto con un potencial de 10819 MW para producir anualmente 9.47 x 107 MWh de energia electrica

Evaluation of the national cogeneration potential as an option for the expansion of the national electric system; Evaluacion del potencial nacional de cogeneracion como opcion en la expansion del sistema electrico nacional

Energy Technology Data Exchange (ETDEWEB)

Nieva Gomez, Rolando; Hernandez Galicia, Julio Alberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Portes Mascorro, Enrique; Alvarez Chavez, Jose Maria [Comision Nacional para el Ahorro de Energia (CONAE), Mexico, D. F. (Mexico)

1998-12-31

The Comision Nacional para el Ahorro de Energia (CONAE) carried out a study to determine the amount of electric energy available by cogeneration in the industrial sector of our country. This study is based in a survey among the enterprises with the largest fuel consumption belonging to the industrial and commercial sectors and to the petrochemical branch of Petroleos Mexicanos (PEMEX). The results of the study are presented, which show the location of the cogeneration potential by the following estimates: a) The scenario under a potential of 5770 MW to generate annually 4.55 x 107 MWh of electric energy. b) The scenario with a potential of 10819 MW to generate annually 9.47 x 107 Mwh of electric energy [Espanol] La Comision Nacional para el Ahorro de Energia (CONAE) llevo acabo un estudio para determinar la cantidad de energia electrica disponible por cogeneracion en el sector industrial de nuestro pais. El estudio se fundamenta en una encuesta entre las empresas con mayor consumo de combustibles pertenecientes a los sectores industrial y comercial y al ramo petroquimico de Petroleos Mexicanos (PEMEX). Se presentan los resultados del estudio, el cual muestra la ubicacion del potencial de cogeneracion por los siguientes estimados: a) El escenario bajo con un potencial de 5770 MW para producir anualmente 4.55 x 107 Mwh de energia electrica. b) El escenario alto con un potencial de 10819 MW para producir anualmente 9.47 x 107 MWh de energia electrica

Design of a hydraulic microturbine type Michell-Banki; Diseno de una microturbina hidraulica tipo Michell-Banki

Energy Technology Data Exchange (ETDEWEB)

Lopez Luiz, Norberto; Rodriguez Bautista, Jose; Verduzco Figueroa, Hilario; Gudino Lau, Jorge; Galindo Granados, Miguel angel [Universidad de Colima, Facultad de Ingenieria Electromecanica, Manzanillo, Colima (Mexico)]. E-mail: norberto_lopez@ucol.mx

2010-11-15

The aim of this paper is to present the design of a hydraulic microturbine (MTH), which may be installed in areas where supplies are not available for electric power transmission lines, but possessing hydroelectric. MTH's role is to convert hydraulic energy into mechanical work, is coupled to an electric generator, whose function is to convert the mechanical energy into electrical energy. The turbine generator set will produce more electric power the greater the hydroelectric of the area. In southern Mexico, we have great hydroelectric potential, as the case of the states of Veracruz, Chiapas and Oaxaca, which have small causes of rivers where the MTH could be installed and put into operation. [Spanish] El objetivo de este articulo es presentar el diseno de una microturbina hidraulica (MTH), la cual podra ser instalada en zonas donde no se cuente con suministro de energia electrica por medio de lineas de transmision, pero que posean aprovechamientos hidroelectricos. La funcion de la MTH es convertir la energia hidraulica en trabajo mecanico, estara acoplada a un generador electrico, cuya funcion es convertir dicha energia mecanica en energia electrica. El conjunto turbina generador producira mas potencia electrica mientras mayor sea el aprovechamiento hidroelectrico de la zona. En el sur de Mexico contamos con un gran potencial hidroelectrico, como el caso de los estados de Veracruz, Chiapas y Oaxaca, que cuentan con pequenos causes de rios donde las MTH podrian ser instaladas y puestas en operacion.

Procedure to determine the convenience of installing a co-generation system; Procedimiento para determinar la conveniencia de instalar un sistema de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Colin Castellanos, Carlos; Acosta Torres, Aracely [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

In this article a methodology for the selection of the co-generation system better adapted to the energy needs of an industry is presented, covering the following schemes: a) Satisfy the thermal demand and deliver to the net the excess electricity generated. b) Reduce the functioning level of the machine and produce electricity in accordance with the internal demand. The thermal demand will be satisfied, for instance, integrating a boiler in the cycle. c) Satisfy the electric demand and utilize only in part the available heat. d) Or else, reduce the operation level of the machine and produce only the necessary thermal energy, taking from the net the electric energy needed to cover the total demand. [Espanol] En este articulo se presenta una metodologia para la seleccion del sistema de cogeneracion que mejor se adapte a las necesidades energeticas de una industria, cubriendo los siguientes esquemas: a) Satisfacer la demanda termica y ceder a la red el exceso de energia electrica generada. b) Reducir el nivel de funcionamiento de la maquina y producir electricidad de acuerdo a la demanda interna. La demanda termica se cubrira, por ejemplo, integrando una caldera al ciclo. c) Satisfacer la demanda electrica y, utilizar solo en parte el calor disponible. d) O bien, reducir el nivel de operacion de la maquina y solo producir la energia termica necesaria, tomando de la red la energia electrica para cubrir la demanda total.

UFISA: electric facility engineering for the service of emergy market

International Nuclear Information System (INIS)

Gutierrez Zapico, A.

1997-01-01

UFISA is the engineering company with the experience of UNION ELECTRICA FENOSA S.A. It activity began in 1990. This company offers to national and international markets the services for energy consumers and for the electricity costumers. (Author)

Reservoir Simulation on the Cerro Prieto Geothermal Field: A Continuing Study

Energy Technology Data Exchange (ETDEWEB)

Castaneda, M.; Marquez, R.; Arellano, V.; Esquer, C.A.

1983-12-15

The Cerro Prieto geothermal field is a liquid-dominated geothermal reservoir of complex geological and hydrological structure. It is located at the southern end of the Salton-Mexicali trough which includes other geothermal anomalies as Heber and East Mesa. Although in 1973, the initial power plant installed capacity was 75 MW of electrical power, this amount increased to 180 MW in 1981 as field development continued. It is expected to have a generating capacity of 620 MW by the end of 1985, when two new plants will be completely in operation. Questions about field deliverability, reservoir life and ultimate recovery related to planned installations are being presently asked. Numerical modeling studies can give very valuable answers to these questions, even at the early stages in the development of a field. An effort to simulate the Cerro Prieto geothermal reservoir has been undergoing for almost two years. A joint project among Comision Federal de Electricidad (CFE), Instituto de Investigaciones Electricas (IIE) and Intercomp of Houstin, Texas, was created to perform reservoir engineering and simulation studies on this field. The final project objective is tosimulate the behavior of the old field region when production from additional wells located in the undeveloped field zones will be used for feeding the new power plants.

The corporative information systems and their application in the SICORP of Comision Federal de Electricidad; Los sistemas de informacion corporativa y su aplicacion en el SICORP de la Comision Federal de Electricidad

Energy Technology Data Exchange (ETDEWEB)

Mejia Lavalle, Manuel; Gonzalez Sustaeta, Jorge [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico); Miranda Miranda, Oscar [Comision Federal de Electricidad (Mexico)

2000-07-01

To be well informed sometimes is a difficult goal to reach, mainly when the companies are developed and grown at the present times rate. It is from this necessity that the Corporative Information Systems (SIC) arise. In this article a real application of a SIC in the Comision Federal de Electricidad (CFE) is presented, in whose conceptualization and implementation, personnel of the Instituto de Investigaciones Electricas (IIE) is participating. [Spanish] Estar bien informado a veces resulta una meta dificil de alcanzar, sobre todo cuando las empresas se desarrollan y crecen al ritmo de los tiempos actuales. Es a partir de esta necesidad que surgen los Sistemas de Informacion Corporativa (SIC). En este articulo se presenta una aplicacion real de un SIC en la Comision Federal de Electricidad (CFE), en cuya conceptualizacion e implantacion esta participando personal del Instituto de Investigaciones Electricas (IIE).

Evaluation of the useful life of steam turbine rotors; Evaluacion de vida util de rotores de turbinas de vapor

Energy Technology Data Exchange (ETDEWEB)

Carnero Parra, Antonio; Garcia Illescas, Rafael; Kubiak Szyszka, Janusz [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

This article presents the methodology applied by the Management of Turbomachinery of the Institute of Investigaciones Electricas (IIE), for the evaluation of the remaining useful life of steam turbine rotors in the phase of initiation of fissures. The evaluation of the remaining useful life of turbines, will reveal the real state of health of the rotor and will serve as a base for the future decision making that guarantees their structural integrity. [Spanish] El presentes articulo presenta la metodologia aplicada por la Gerencia de Turbomaquinaria del Instituto de Investigaciones Electricas (IIE), para la evaluacion de la vida util remanente de rotores de turbinas de vapor en la fase de iniciacion de fisuras. La evaluacion de la vida util de turbinas, revelar el estado real de salud del rotor y servira de base para la toma de decisiones futuras que garanticen su integridad estructural.

Geotermics; Geotermia

Energy Technology Data Exchange (ETDEWEB)

Arellano Gomez, Victor [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

The Instituto de Investigaciones Electricas (IIE) through the Management of Geotermics has developed technologies that have allowed the utilization of the existing natural thermal energy from inside the Earth. In this article the developments made in this management are presented among which are the following ones: development of geotermometer of cationic composition (GCC), development of an Anapress system, and design and construction of mixed permeameter gas - liquid. [Spanish] El Instituto de Investigaciones Electricas (IIE) a traves de la Gerencia de Geotermia ha desarrollado tecnologias que han permitido el aprovechamiento de la energia termica natural existente en el interior de la tierra. En este articulo se presentan los desarrollos realizados en esta gerencia entre los cuales se encuentran los siguientes: desarrollo de un geotermometro de composicion cationica (GCC), desarrollo de un sistema Anapres, y diseno y construccion de un permeametro mixto gas - liquido.

Report of the results of the second phase of Research Coordinated Program of IAEA ''Regional Intercomparison of Personnel Dosimetry''

International Nuclear Information System (INIS)

Morales, J.; Diaz, E.; Hernandez, E.; Capote, E.

1998-01-01

In this report the results of an intercomparison program within a research coordinated program are presented. This is a second phase of the study that consisted in to evaluate the implementation of the new ICRU quantities for individual monitoring by the dosimetry laboratories. In this report the organization aspects, quality control of the irradiations performed by the reference laboratory (SSDL of the Centro de Proteccion e Higiene de las radiaciones) as well the results of the participant laboratories are included

Políticas trigueras en países competidores : Análisis comparado

OpenAIRE

Idígoras, Gustavo

2010-01-01

El autor analiza la dificultad de discutir el rol del Estado en la construcción de una cadena de valor del trigo, tanto en la Argentina como en otros países del mundo. Describe como son las políticas públicas agropecuarias de nuestros competidores, a través de subsidios y/o las protecciones arancelarias haciendo hincapié en la importancia de estas políticas en el crecimiento de la cadena de valor del trigo.

Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

Energy Technology Data Exchange (ETDEWEB)

Ramos, G.; Heard, Ch.; Sanchez Viveros, A. [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

1997-12-31

Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

Scenarios simulation for the conservation and efficient use of energy, using passive control measures; Simulacion de escenarios de ahorro y uso eficiente de energia, utilizando medidas de control pasivo

Energy Technology Data Exchange (ETDEWEB)

Ramos, G; Heard, Ch; Sanchez Viveros, A [Instituto de Investigaciones Electricas,Cuernavaca (Mexico)

1998-12-31

Every one involved with the conservation and efficient use of electric energy, has listened in reiterative occasions to the causes that changed the conventional mentality at the beginning of the seventies. Nevertheless, there are many persons that still ignore that by using the energy rationally, their costs are significantly reduced, their comfort is enhanced and the environmental problems are minimized. Specifically, in the domestic sector, from the figures reported by the Comision Federal de Electricidad (CFE) in 1996, the electric energy sold was 28,410 Gwh, that is, 23.4% of the total consumption (121,579 Gwh). Table 1 presents the average by tariff in the national domestic sector, which shows that 20% of the electricity consumed was required for environmental conditioning (air conditioning, evaporative coolers and electric fans). The above figures quantitatively show that there is a strong impact in the consumption of electric energy due to weather conditions. For this reason, currently the Comision Nacional de Ahorro de Energia (CONAE) and the Fideicomiso para el Ahorro de Energia (FIDE) are promoting standards and projects to propitiate the rationalization in the use of energy, besides of achieving the improvement of thermal comfort conditions. One more case would be the Fideicomiso para el Aislamiento Termico de la Vivienda en Mexicali (FIPATERM), which promotes the financing of saving measures and efficient energy use in cities with extreme climate. This paper describes the strategy that was followed by the Instituto de Investigaciones Electricas (IIE), for the development of the human and material infrastructure, that has allowed the sustainment of several projects in the saving and efficient use of energy in CFE, CONAE, FIDE, FIPATERM and the Lawrence Berkeley National Laboratory (LBNL), concretely in relationship with the thermal analysis of dwellings. [Espanol] Todos aquellos relacionados con el ahorro y el uso eficiente de la energia electrica, han

INFRAESTRUCTURA DE COMUNICACIONES EN MICRORREDES ELECTRICAS

Directory of Open Access Journals (Sweden)

Elvis Eduardo Gaona García

2014-11-01

Full Text Available Este artículo muestra un estudio de la actualidad técnica y tecnológica de la infraestructura de comunicaciones utilizadas en  microrredes eléctricas, en este sentido ha surgido la necesidad de investigar, analizar, mejorar y desarrollar métodos de comunicación tanto alámbricos como inalámbricos que permitan crear una infraestructura de comunicaciones que soporte las características de control, supervisión y trasmisión de información entre dispositivos de control en una microrred de forma eficiente, segura y confiable.Dadas estas características en el artículo se analizan  las diferentes arquitecturas y topologías propuestas entorno a comunicaciones en el ambiente Smart Grid que se puedan adaptar a la forma en que opera una microrred. Se muestran las propuestas  y desarrollos realizados en el  área de telecomunicaciones concerniente a protocolos de comunicaciones utilizados en microrredes eléctricas, con el fin de conocer las tecnologías, protocolos y algoritmos utilizados en la transmisión de datos.

Opportunities for the operation of the Comision Federal de Electricidad`s fossil fuel power plant stations eventually to be retired as cogeneration units; Oportunidades de operar las centrales termoelectricas de la Comision Federal de Electricidad, eventualmente retirables como unidades de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Merlos Rueda, R. M. [Programa de Ahorro de Energia para el Sector Electrico, Mexico, D. F. (Mexico)

1995-12-31

The Programa de Ahorro de Energia para el Sector Electrico (PAESE) (Program for Energy Conservation for the Electric Sector) in collaboration with the Instituto de Investigaciones Electricas (IIE), decided to evaluate technically and economically the possibilities of operating the Comision Federal de Electricidad`s Thermoelectric Power Stations (TPS), eventually to be retired as cogeneration units in supplying thermal energy to industry. The study was focussed to the Monterrey and San Jeronimo Power Stations, determining in a first stage, the optimum radius for handling and transporting steam and/or hot water and so to define the industries that potentially could obtain heat energy from the TPS, in this stage the thermal needs of the evaluated industries were determined (pressure, temperature and flow). In a second stage, the different arrangements to be made to operate the selected TPS, so as to be in position of satisfying such thermal energy demands were evaluated. This paper presents the results of this study. [Espanol] El Programa de Ahorro de Energia para el Sector Electrico (PAESE), en colaboracion con el Instituto de Investigaciones Electricas, decidieron evaluar tecnica y economicamente las posibilidades de operar las centrales termoelectricas (CT`s) de la Comision Federal de Electricidad, eventualmente retirables, como unidades de cogeneracion al ofrecer calor a la industria. El estudio se enfoco en las centrales de Monterrey y San Jeronimo, determinado en una primera etapa el radio optimo para el manejo y transporte de vapor y/o agua caliente y asi definir a las industrias que potencialmente podrian recibir calor de las CT`s, en esta etapa se determinaron las necesidades termicas de las industrias evaluadas (presion, temperatura y flujo). En una segunda etapa se evaluo los diferentes arreglos para operar las CT`s seleccionadas para que pudieran satisfacer dichas demandas termicas. En este trabajo se presentaron los resultados de dicho estudio.

Opportunities for the operation of the Comision Federal de Electricidad`s fossil fuel power plant stations eventually to be retired as cogeneration units; Oportunidades de operar las centrales termoelectricas de la Comision Federal de Electricidad, eventualmente retirables como unidades de cogeneracion

Energy Technology Data Exchange (ETDEWEB)

Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico); Merlos Rueda, R M [Programa de Ahorro de Energia para el Sector Electrico, Mexico, D. F. (Mexico)

1996-12-31

The Programa de Ahorro de Energia para el Sector Electrico (PAESE) (Program for Energy Conservation for the Electric Sector) in collaboration with the Instituto de Investigaciones Electricas (IIE), decided to evaluate technically and economically the possibilities of operating the Comision Federal de Electricidad`s Thermoelectric Power Stations (TPS), eventually to be retired as cogeneration units in supplying thermal energy to industry. The study was focussed to the Monterrey and San Jeronimo Power Stations, determining in a first stage, the optimum radius for handling and transporting steam and/or hot water and so to define the industries that potentially could obtain heat energy from the TPS, in this stage the thermal needs of the evaluated industries were determined (pressure, temperature and flow). In a second stage, the different arrangements to be made to operate the selected TPS, so as to be in position of satisfying such thermal energy demands were evaluated. This paper presents the results of this study. [Espanol] El Programa de Ahorro de Energia para el Sector Electrico (PAESE), en colaboracion con el Instituto de Investigaciones Electricas, decidieron evaluar tecnica y economicamente las posibilidades de operar las centrales termoelectricas (CT`s) de la Comision Federal de Electricidad, eventualmente retirables, como unidades de cogeneracion al ofrecer calor a la industria. El estudio se enfoco en las centrales de Monterrey y San Jeronimo, determinado en una primera etapa el radio optimo para el manejo y transporte de vapor y/o agua caliente y asi definir a las industrias que potencialmente podrian recibir calor de las CT`s, en esta etapa se determinaron las necesidades termicas de las industrias evaluadas (presion, temperatura y flujo). En una segunda etapa se evaluo los diferentes arreglos para operar las CT`s seleccionadas para que pudieran satisfacer dichas demandas termicas. En este trabajo se presentaron los resultados de dicho estudio.

Assessment methodology of the summer time schedule change (CHV) in Mexico: 10 years of application; Metodologia de evaluacion del cambio de horario de verano (CHV) en Mexico: 10 anos de aplicacion

Energy Technology Data Exchange (ETDEWEB)

Maqueda Zamora, Martin Roberto; Perez Rebolledo, Hugo [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2008-07-01

The Summer Time is strongly bound to the rational use of the natural resources, since it is a measure that contributes to the care of the country energy resources and the improvement of the environment. This measure consists of advancing the clock one hour in the months that have greater insolation in the country and when doing it, the electrical energy demand is reduced, a saving in the consumption of the same is obtained, resulting in a reduction of the fossil fuel consumption that is needed to generate electric energy and also the emission of polluting agents to the environment is detained. It is to emphasize that the sustainable development and the environment depend on the energy efficient use. With the application of the Summertime Schedule, the entire country participate in the care of the energy resources that are derived from their application and generates in the population a culture of the care of the energy and the environment. This program is applied to world-wide level, including the industrialized countries. In this paper the methodology implemented by the Instituto de Investigaciones Electricas (IIE) is presented, to realize the calculations of saving in electrical power consumption and the quantification of the avoided demand, as well as the main results obtained in 10 years of application of the measure in Mexico. [Spanish] El horario de verano esta fuertemente ligado al uso racional de los recursos naturales, ya que es una medida que contribuye al cuidado de los recursos energeticos del pais y la mejora del medio ambiente. Esta medida consiste en adelantar el reloj una hora en los meses que se tiene mayor insolacion en el pais y al hacerlo, se reduce la demanda de energia electrica, se tiene un ahorro en el consumo de la misma y como resultado se reduce el consumo de combustibles fosiles que se necesitan para generar la energia electrica y tambien se dejan de emitir contaminantes al medio ambiente. Cabe resaltar que el desarrollo sustentable y el

Module generator of plans for dynamic processes; Modulo generdor de planes para procesos dinamicos

Energy Technology Data Exchange (ETDEWEB)

Reyes B, Alberto; Fernandez J, Jose L [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2002-07-01

This work describes the generating module of plans (Geplan) as a part of the project: Development of Techniques of Intelligent Planning for Dynamic Processes, based on techniques of artificial intelligence, and that is being developed in the Gerencia de Control e Instrumentacion the Instituto de Investigaciones Electricas (IIE). The study case corresponds to the elaboration of a plan to help the plant operators in the task of taking a combined cycle central (CCC) to a stable state of operation given a specific load level. The architecture of the module generator of plans is presented and the codification of the actions allowed (ACT) is illustrated by means of rules, in addition the challenges that are due to face so that the system operates in line with the process. Also the technical aspects of the generator of plans, as well as the benefits and expectations of their use in any CCC are mentioned. [Spanish] En este trabajo se describe el modulo generador de planes (Geplan) como parte del proyecto Desarrollo de Tecnicas de Planificacion Inteligente para Procesos Dinamicos, basado en tecnicas de inteligencia Artificial, y que estan desarrollandose en la Gerencia de Control e Instrumentacion del Instituto de Investigaciones Electrica (IIE). El caso de estudio corresponde a la elaboracion de un plan para asistir a los operadores de planta en la tarea de llevar una central de ciclo combinado (CCC) a un estado estable de operacion dedo un nivel de carga especifico. Se presenta la arquitectura del modulo generador de planes y se ilustra la codificacion de las acciones permitidas (ACT) mediante reglas, ademas los retos que se deben enfrentar para que el sistema opere en linea con el proceso. Tambien se mencionan los aspectos tecnicos del generador de planes, asi como los beneficios y expectativas de su uso en cualquier CCC.

Control system modernization of a turbo-gas unit of CFE in the Comarca Lagunera; Modernizacion del sistema de control de una unidad turbogas de la CFE en la Comarca Lagunera

Energy Technology Data Exchange (ETDEWEB)

Sanchez P, Marino; De Lara J, Salvador; Hernandez Muniz, Alfredo [Industria SIGRAMA, Cuernavaca, Morelos (Mexico); Garcia Cabello, Raymundo [Comision Federal de Electricidad (Mexico)

2004-07-01

At the present time, the turbo-gas units (TGU) make an important contribution in the development and growth of the national power sector, since this type of units pertaining to the Comision Federal de Electricidad (CFE) contributes with the 6.23% of the national production, that is to say, 2600 MW approx. The turbo-gas units are aero-derivative gas turbines used for power generation, pumping and compression. Generally, they are used to support urgent requests in the demand of electricity or, for the permanent supply of electrical energy in isolated zones. In addition, they are used to quickly get into and get out of operation, which requires high availability, trustworthiness and flexibility. In this sense, and with the intention of improving the operation of the TGUs, the Gerencia de Control e Instrumentation (GCI) (Management of Control and Instrumentation) of the Instituto de Investigaciones Electricas (IIE), has developed a control technology for this type of units, able to replace the original control systems of units with even 30 years of continuous operation or to be installed in new units. [Spanish] En la actualidad, las unidades de turbogas (UTG) tienen una importante contribucion en el desarrollo y crecimiento del sector energetico nacional, pues este tipo de unidades pertenecientes a la Comision Federal de Electricidad (CFE) aportan el 6.23% de la produccion nacional, es decir, 2600 MW aproximadamente. Las unidades turbogas son turbinas de gas aeroderivativas empleadas para la generacion electrica, bombeo y compresion. Por lo general, son utilizadas para apoyar solicitudes urgentes en la demanda de electricidad o bien, para el suministro permanente de energia electrica en zonas aisladas. Ademas, se usan para entrar y salir rapidamente en operacion, lo que requiere alta disponibilidad, confiabilidad y flexibilidad. En este sentido, y con la intencion de mejorar las UTG, la Gerencia de Control e Instrumentacion (GCI) del Instituto de Investigaciones

Optimum Concentration Ratio Analysis Using Dynamic Thermal Model for Concentrated Photovoltaic System

Science.gov (United States)

2012-03-22

Iberoamericano de Estudiantes de Ingenieria Electrica, s.l. : Cibelec, 2005. 40. Brogren, Maria. Optical Effeciency of Low-Concentrating Solar Energy...46 3.5 Particular Solution to the Transport Equation...50 3.7 Homogenous Solution the Transport Equation ..................................................... 51 3.8 Total Excess

Second statement of the working group on electrocardiographic diagnosis of left ventricular hypertrophy

DEFF Research Database (Denmark)

Bacharova, Ljuba; Estes, E Harvey; Bang, Lia E

2011-01-01

The Working Group on Electrocardiographic Diagnosis of Left Ventricular Hypertrophy, appointed by the Editor of the Journal of Electrocardiology, presents the alternative conceptual model for the ECG diagnosis of left ventricular hypertrophy (LVH). It is stressed that ECG is a record of electrica...

Asphaltenes in Mexican fuel oils; Asfaltenos en combustoleos mexicanos

Energy Technology Data Exchange (ETDEWEB)

Longoria Ramirez, Rigoberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1996-12-31

In this article the main aspects in which the Instituto de Investigaciones Electricas (IIE) has worked to contribute to the solution of problems due to the presence of asphaltenes in national fuel oils, are emphasized. The increment of these compounds, that concentrate harmful elements, in the last ten years has reached 22% by weight of the fuel oil. It is demonstrated that the quantification of asphaltenes depends on the type of solvent employed. [Espanol] En este articulo se subrayan los principales aspectos en los que el Instituto de Investigaciones Electricas (IIE) ha trabajado para contribuir a la solucion de problemas debidos a la presencia de asfaltenos en combustoleos nacionales. El incremento de estos compuestos, que concentran elementos nocivos, en los ultimos diez anos ha llegado hasta un 22% del peso del combustoleo. Se demuestra que la cuantificacion de los asfaltenos depende del tipo de solvente utilizado.

Asphaltenes in Mexican fuel oils; Asfaltenos en combustoleos mexicanos

Energy Technology Data Exchange (ETDEWEB)

Longoria Ramirez, Rigoberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

In this article the main aspects in which the Instituto de Investigaciones Electricas (IIE) has worked to contribute to the solution of problems due to the presence of asphaltenes in national fuel oils, are emphasized. The increment of these compounds, that concentrate harmful elements, in the last ten years has reached 22% by weight of the fuel oil. It is demonstrated that the quantification of asphaltenes depends on the type of solvent employed. [Espanol] En este articulo se subrayan los principales aspectos en los que el Instituto de Investigaciones Electricas (IIE) ha trabajado para contribuir a la solucion de problemas debidos a la presencia de asfaltenos en combustoleos nacionales. El incremento de estos compuestos, que concentran elementos nocivos, en los ultimos diez anos ha llegado hasta un 22% del peso del combustoleo. Se demuestra que la cuantificacion de los asfaltenos depende del tipo de solvente utilizado.

Electric field and energy of a point electric charge between confocal hyperbolaidal electrodes

Energy Technology Data Exchange (ETDEWEB)

Ley-Koo, E. [Universidad Nacional Autonoma de Mexico, Mexico, D. F. (Mexico)

2001-06-01

The electric potential and intensity field, as well as the energy of a point electric charge between confocal hyperboloidal electrodes is evaluated as a superposition of prolate spheroidal harmonics using the Green-function technique. This study is motivated by the need to model the electric field between the tip and the sample in a scanning tunnelling microscope, and it can also be applied to a conductor-insulator-conductor junction. [Spanish] Los campos de potencial y de intensidad electrica, asi como la energia de una carga electrica puntual entre electrodos hiperboloidales confocales se evaluan como superposiciones de armonicos esferoidales prolatos usando la tecnica de la funcion de Green. Este estudio ha sido motivado por la necesidad de modelar el campo electrico entre la punta y la muestra de un microscopio de tunelamiento y barrido, y se puede aplicar tambien a una union de conductor-aislante-conductor.

Plant-plant competition outcomes are modulated by plant effects on the soil bacterial community.

Science.gov (United States)

Hortal, S; Lozano, Y M; Bastida, F; Armas, C; Moreno, J L; Garcia, C; Pugnaire, F I

2017-12-19

Competition is a key process that determines plant community structure and dynamics, often mediated by nutrients and water availability. However, the role of soil microorganisms on plant competition, and the links between above- and belowground processes, are not well understood. Here we show that the effects of interspecific plant competition on plant performance are mediated by feedbacks between plants and soil bacterial communities. Each plant species selects a singular community of soil microorganisms in its rhizosphere with a specific species composition, abundance and activity. When two plant species interact, the resulting soil bacterial community matches that of the most competitive plant species, suggesting strong competitive interactions between soil bacterial communities as well. We propose a novel mechanism by which changes in belowground bacterial communities promoted by the most competitive plant species influence plant performance and competition outcome. These findings emphasise the strong links between plant and soil communities, paving the way to a better understanding of plant community dynamics and the effects of soil bacterial communities on ecosystem functioning and services.

Apoplastic interactions between plants and plant root intruders

Directory of Open Access Journals (Sweden)

Kanako eMitsumasu

2015-08-01

Full Text Available Numerous pathogenic or parasitic organisms attack plant roots to obtain nutrients, and the apoplast including the plant cell wall is where the plant cell meets such organisms. Root-parasitic angiosperms and nematodes are two distinct types of plant root parasites but share some common features in their strategies for breaking into plant roots. Striga and Orobanche are obligate root parasitic angiosperms that cause devastating agricultural problems worldwide. Parasitic plants form an invasion organ called a haustorium, where plant cell wall degrading enzymes (PCWDEs are highly expressed. Plant-parasitic nematodes are another type of agriculturally important plant root parasite. These nematodes breach the plant cell walls by protruding a sclerotized stylet from which PCWDEs are secreted. Responding to such parasitic invasion, host plants activate their own defense responses against parasites. Endoparasitic nematodes secrete apoplastic effectors to modulate host immune responses and to facilitate the formation of a feeding site. Apoplastic communication between hosts and parasitic plants also contributes to their interaction. Parasitic plant germination stimulants, strigolactones (SLs, are recently identified apoplastic signals that are transmitted over long distances from biosynthetic sites to functioning sites. Here, we discuss recent advances in understanding the importance of apoplastic signals and cell walls for plant-parasite interactions.

Apoplastic interactions between plants and plant root intruders.

Science.gov (United States)

Mitsumasu, Kanako; Seto, Yoshiya; Yoshida, Satoko

2015-01-01

Numerous pathogenic or parasitic organisms attack plant roots to obtain nutrients, and the apoplast including the plant cell wall is where the plant cell meets such organisms. Root parasitic angiosperms and nematodes are two distinct types of plant root parasites but share some common features in their strategies for breaking into plant roots. Striga and Orobanche are obligate root parasitic angiosperms that cause devastating agricultural problems worldwide. Parasitic plants form an invasion organ called a haustorium, where plant cell wall degrading enzymes (PCWDEs) are highly expressed. Plant-parasitic nematodes are another type of agriculturally important plant root parasite. These nematodes breach the plant cell walls by protruding a sclerotized stylet from which PCWDEs are secreted. Responding to such parasitic invasion, host plants activate their own defense responses against parasites. Endoparasitic nematodes secrete apoplastic effectors to modulate host immune responses and to facilitate the formation of a feeding site. Apoplastic communication between hosts and parasitic plants also contributes to their interaction. Parasitic plant germination stimulants, strigolactones, are recently identified apoplastic signals that are transmitted over long distances from biosynthetic sites to functioning sites. Here, we discuss recent advances in understanding the importance of apoplastic signals and cell walls for plant-parasite interactions.

Chemical signaling between plants and plant-pathogenic bacteria.

Science.gov (United States)

Venturi, Vittorio; Fuqua, Clay

2013-01-01

Studies of chemical signaling between plants and bacteria in the past have been largely confined to two models: the rhizobial-legume symbiotic association and pathogenesis between agrobacteria and their host plants. Recent studies are beginning to provide evidence that many plant-associated bacteria undergo chemical signaling with the plant host via low-molecular-weight compounds. Plant-produced compounds interact with bacterial regulatory proteins that then affect gene expression. Similarly, bacterial quorum-sensing signals result in a range of functional responses in plants. This review attempts to highlight current knowledge in chemical signaling that takes place between pathogenic bacteria and plants. This chemical communication between plant and bacteria, also referred to as interkingdom signaling, will likely become a major research field in the future, as it allows the design of specific strategies to create plants that are resistant to plant pathogens.

Four planting devices for planting no-till maize

Directory of Open Access Journals (Sweden)

Osei Bonsu Patterson

2015-05-01

Full Text Available An experiment was conducted at the CSIR-Crops Research Institute (CSIR-CRI Experimental station at Ejura in Ghana to compare the efficiency of four devices for planting no-till maize: Tractor drawn seeder, Chinese made jab planter, Locally made jab planter and a Cutlass. It took two (2 hours 48 minutes to plant one hectare of maize with the tractor drawn seeder, which was significantly (p less than 1% faster than all the planting methods. Cutlass was the slowest planting device lasting more than 14 hours per hectare. There was no significant difference in planting time between the Chinese planter and local planter. Economic analysis showed that cutlass planting produced the highest net benefit, whilst tractor drawn seeder produced the least benefit. In this study cutlass planting was done with precision by collaborating farmers. In actual farm situation however, hired laborers (planting gangs often plant in haste which often results in poor plant population leading to low yields. Tractor drawn seeders or jab planters could reduce drudgery in planting and encourage farm expansion.

Independent auto evaluation of an operative radiological protection program; Autoevaluacion independiente de un programa de proteccion radiologica operativa

Energy Technology Data Exchange (ETDEWEB)

Medrano L, M.A.; Rodriguez C, C.C.; Linares R, D.; Zarate M, N.; Zempoalteca B, R. [Gerencia Subsede Sureste Instituto Nacional de Investigaciones Nucleares, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: maam@nuclear.inin.mx

2006-07-01

The program of operative radiological protection of a nuclear power plant consists of multiple procedures and associate tasks that have as purpose the radiological protection of the workers of the power station. It is for this reason that the constant evaluation of the one it programs it is an important tool in the identification of their weaknesses (and strengths), so they can be assisted appropriately. In this work the main elements of the program of independent auto evaluation of the program of operative radiological protection of the Laguna Verde Central that has been developed and implemented by the National Institute of Nuclear Research are described. (Author)

Plant aquaporins: roles in plant physiology.

Science.gov (United States)

Li, Guowei; Santoni, Véronique; Maurel, Christophe

2014-05-01

Aquaporins are membrane channels that facilitate the transport of water and small neutral molecules across biological membranes of most living organisms. Here, we present comprehensive insights made on plant aquaporins in recent years, pointing to their molecular and physiological specificities with respect to animal or microbial counterparts. In plants, aquaporins occur as multiple isoforms reflecting a high diversity of cellular localizations and various physiological substrates in addition to water. Of particular relevance for plants is the transport by aquaporins of dissolved gases such as carbon dioxide or metalloids such as boric or silicic acid. The mechanisms that determine the gating and subcellular localization of plant aquaporins are extensively studied. They allow aquaporin regulation in response to multiple environmental and hormonal stimuli. Thus, aquaporins play key roles in hydraulic regulation and nutrient transport in roots and leaves. They contribute to several plant growth and developmental processes such as seed germination or emergence of lateral roots. Plants with genetically altered aquaporin functions are now tested for their ability to improve plant resistance to stresses. This article is part of a Special Issue entitled Aquaporins. Copyright © 2013 Elsevier B.V. All rights reserved.

Integrated Gasification SOFC Plant with a Steam Plant

DEFF Research Database (Denmark)

Rokni, Masoud; Pierobon, Leonardo

2011-01-01

A hybrid Solid Oxide Fuel Cell (SOFC) and Steam Turbine (ST) plant is integrated with a gasification plant. Wood chips are fed to the gasification plant to produce biogas and then this gas is fed into the anode side of a SOFC cycle to produce electricity and heat. The gases from the SOFC stacks...... enter into a burner to burn the rest of the fuel. The offgases after the burner are now used to generate steam in a Heat Recovery Steam Generator (HRSG). The generated steam is expanded in a ST to produce additional power. Thus a triple hybrid plant based on a gasification plant, a SOFC plant...... and a steam plant is presented and studied. The plant is called as IGSS (Integrated Gasification SOFC Steam plant). Different systems layouts are presented and investigated. Electrical efficiencies up to 56% are achieved which is considerably higher than the conventional integrated gasification combined...

Asociacion Espanola de la Industria Electrica (UNESA) annual report 2006. Information about electricity activities; Asociacion Espanola de la Industria Electrica UNESA 2006 memoria estadistica. Informe sobre las actividades electricas

Energy Technology Data Exchange (ETDEWEB)

NONE

2007-07-01

The annual report of UNESA, the industrial grouping of major power companies in Spain, gives statistical data relating to power generation, transmission and distribution and a summary of achievements during 2006. Power is generated from fossil fuel, nuclear, and hydro power. Cooperation of UNESA with international organizations is reported. Detailed figures are given for electricity production during the year. A summary of the report is available in English and Spanish on the website www.unesa.es.

Formation of electrical islands conformed by a generator, a part from an electrical distributor and industrial plants; Formacion de islas electricas conformadas por un generador, parte de una distribuidora electrica y plantas industriales

Energy Technology Data Exchange (ETDEWEB)

Aguero, J.L.; Beroqui, M.; Barbieri, B. [Universidad Nacional de La Plata, Buenos Aires (Argentina). Facultad de Ingenieria. Instituto de Investigaciones Tecnologicas para Redes y Equipos Electricos

2001-07-01

The goal of this paper is to describe, through an example, the aspects of importance to be taken into consideration for a successful electric island formation in cases that have an important generation excess with respect to the demand, and in cases that result in a balanced condition.This paper is based on the accomplished investigations due to the need of a petrochemistry industry of increasing the reliability of its electric power provision.

Localización de faltas en líneas de tres terminales a partir de las medidas de los relés de una protección diferencial de línea

OpenAIRE

Sánchez Gómez, Juan Ángel

2016-01-01

El presente trabajo se enmarca dentro de un área de gran importancia dentro de la Ingeniería Eléctrica como es el de los sistemas de protecciones eléctricas. Los sistemas de protección eléctricos protegen los elementos que forman parte de los sistemas de energía eléctrica, como las líneas de transmisión de electricidad o las subestaciones, frente a perturbaciones, tanto internas como externas, que pueden producirse en dichos sistemas. Entre las perturbaciones que pueden producirse en un si...

Tests and putting in service of the equipment of a power substation; Pruebas y puesta en servicio del equipo de una subestacion

Energy Technology Data Exchange (ETDEWEB)

Raull Martin, J. [Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)

2001-09-01

The purpose of this paper is to present a summarized version of the test series required to determine out the final condition of the isolations, the continuity of the control circuits, as well as protection, measurement, sign-posting; alarms and the total substation performance. [Spanish] El proposito de este articulo es presentar en forma compacta la serie de pruebas que se requieren para determinar el estado final de los aislamientos, la continuidad de los circuitos de control, proteccion, medicion, senalizacion, alarmas, asi como el funcionamiento del conjunto de la subestacion.

Diseño y construcción de un banco didáctico para pruebas de motores monofásicos.

OpenAIRE

Cornejo Ponce, Erick Alexander; Tinajero Guerra, Jorge Oswaldo

2015-01-01

El presente proyecto de grado sirve como guía didáctica del laboratorio donde se muestran los distintos tipos de motores monofásicos más comunes para aplicaciones residenciales, comerciales e industriales. El banco se conforma de una infraestructura metálica donde se instalan bloques de controles, protecciones y equipos de medición para analizar el funcionamiento en vacío de los motores; motor monofásico de fase partida o arranque por devanado auxiliar, motor monofásico de arranque por capac...

Sobre el armamento defensivo de los soldados romanos en el siglo IV d.C: a propósito de un relieve de Córdoba

OpenAIRE

Menéndez Argüín, Adolfo Raúl; Beltrán Fortes, José

2001-01-01

En este artículo se presenta una pieza procedente de un sarcófago romano de Madinat al-Zahra (Córdoba) fechado en el s. IV d.C. en la que puede observarse claramente un individuo equipado con cota de malla. Este es uno de los pocos documentos gráficos de soldados equipados con armadura procedentes del s. IV, de ahí la trascendencia de la pieza y su inclusión como una evidencia más de la continuidad de las protecciones corporales durante el Imperio Tardío.

La poliorcética en el Imperio Neoasirio

Directory of Open Access Journals (Sweden)

Rubén Sáez Abad

2011-01-01

Full Text Available Los Asirios contaron con las armas más avanzadas de su tiempo. Evolucionaron la guerra de sitio con la presencia de torres móviles, arietes y vehículos empujados a mano dotados de protecciones.Estos avanzados recursos permitieron la extensión de sus dominios por toda Mesopotamia. Assyrians had the most advanced weapons of their time. They developed siege craft with mobile towers, battering rams and hand propelled vehicles with armor protection. These advanced resources allowed the extension of his domains for Mesopotamia

Estudio y diseño de un sistema micro hidroeléctrico para generación y abastecimiento de energía eléctrica mediante energía renovable para una vivienda típica del sector de Sinincay perteneciente al Cantón Cuenca

OpenAIRE

Vásquez Huiracocha, Vinicio Rolando

2015-01-01

Para solucionar la falta de energía eléctrica para una vivienda que por su ubicación está distante de la red de distribución pero posee condiciones favorables para generar energía limpia y renovable con los beneficios económicos, ambientales, sociales y demás implícitos, favorecen para estudiar y construir una microcentral hidroeléctrica de agua fluyente a través de una turbina Pelton acoplada al generador de 2000 Vatios en frecuencia y voltaje nominales. Tras conexiones, protecciones y medic...

Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

Energy Technology Data Exchange (ETDEWEB)

Patlan Frausto, Jose O; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

The necessity of renovation of the fundamental concepts of geochemistry for the geothermal systems; La necesidad de renovacion de los conceptos fundamentales de geoquimica para los sistemas geotermicos

Energy Technology Data Exchange (ETDEWEB)

Mahendra Jaiswal, Pal Verma [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article the exhaustive experimentation of the compilation of the experimental data of quartz solubility is presented along with the saturation curve water - steam and in the zone of compressed liquid. On the base of these data a regression relation was derived, which is valid for the entire range of temperature from 0 to 374 Celsius degrees. This study was developed by Mahendra Pal Verma Jaiswal, researcher of the Instituto de Investigaciones Electricas (IIE) [Spanish] En este articulo se presenta el experimento exhaustivo de la recopilacion de los datos experimentales de la solubilidad de cuarzo a lo largo de la curva de saturacion agua - vapor y en la zona de liquido comprimido. Sobre la base de estos datos se derivo una relacion de regresion, la cual es valida para todo el rango de temperatura desde 0 a 374 grados Celsius. Este estudio fue desarrollado por Mahendra Pal Verma Jaiswal, investigador del Instituto de Investigaciones Electricas (IIE)

Atmospheric electric discharges and grounding systems; Descargas atmosfericas y sistemas de conexion a tierra

Energy Technology Data Exchange (ETDEWEB)

Rivas, Elena [ed.] [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

1999-07-01

In this article the work made by the Institute of Investigaciones Electricas (IIE), in the area of atmospheric electric discharges and grounding connections at Comision Federal de Electricidad (CFE) is presented. The work consisted of the revision of the procedures for the design of transmission lines and substations of CFE from which high indexes of interruptions are reported, from this, a program was defined that allowed to improve the existing designs in CFE. [Spanish] En este articulo se presenta el trabajo realizado por el Instituto de Investigaciones Electricas (IIE), en el area de descargas atmosfericas y conexiones a tierra en Comision Federal de Electricidad (CFE). El trabajo consistio en la revision de los procedimientos de diseno de las areas de transmision y subestaciones de la CFE para los que se reportan altos indices de salidas, a partir de esto se definio un programa que permitio mejorar los disenos existentes en la CFE.

Computer electric design of synchronous generators; Diseno electrico de generadores sincronos por computadora

Energy Technology Data Exchange (ETDEWEB)

Patlan Frausto, Jose O.; Acosta Aradillas, Juan [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

In this article are presented, in a conceptual manner the main elements that participate in the electric design of synchronous generators. Also, other options are presented for computers utilization as a design support. Afterwards, a computer program developed by the Instituto de Investigaciones Electricas (IIE) for the electric design of projecting poles generators is presented, oriented towards obtaining their electro-magnetic dimensioning. Finally, with the purpose of validating this program, the results obtained in a specific case, are presented. [Espanol] En este articulo se presentan, de manera conceptual, los principales elementos que participan en el proceso de diseno electrico de generadores sincronos. Tambien se plantean otras opciones para utilizar las computadoras como apoyo de diseno. Posteriormente, se describe un programa de computo desarrollado en el Instituto de Investigaciones Electricas (IIE) para el diseno electrico de generadores de polos salientes, orientado a obtener su dimensionamiento electromagnetico. Por ultimo, con el proposito de validar este programa, se presentan los resultados obtenidos en un caso particular.

Application of Geographic Information Systems for Rural Electrification with Renewable Energy: IntiGIS Model. Case of Study: Zapara Island, Zulia State. Venezuela; Aplicaciones de Sistemas de Informacion Geografica para la Electrificacion Rural con Energias Renovables: Modelo IntiGIS. Caso de Estudio: Isla Zapara, Estado Zulia. Venezuela

Energy Technology Data Exchange (ETDEWEB)

Rincon, L; Dominguez, J; Amador, J; Arribas, L; Pinedo, I

2011-07-01

This project started as an educational exercise for the Renewable Energy and Environment Master, taught by the Polytechnic University of Madrid, with the purpose of analyze in a real context GIS application in rural electrification with renewable energies. It was developed in collaboration with CIEMAT, ENELVEN (C.A. Energia Electrica de Venezuela), FUNDELEC (Fundacion para el Desarrollo del Servicio Electrico), CORPOLEC (Corporacion Electrica Nacional de Venezuela) and the UPM. The final aim is to define the technology that suits best to Zapara Islands electrification needs. This improvement will make possible the sustainable development of the population. In order to compare electrification technologies to decide which is the most suitable to Zapara Island, using IntiGIS model, will be required a geographic resources analysis, a population distribution and an electricity demand study. Also, it will be necessary to establish the technical parameters of the facility and economic factors that could affect the study. (Author) 14 refs.

Plant ecdysteroids: plant sterols with intriguing distributions, biological effects and relations to plant hormones.

Science.gov (United States)

Tarkowská, Danuše; Strnad, Miroslav

2016-09-01

The present review summarises current knowledge of phytoecdysteroids' biosynthesis, distribution within plants, biological importance and relations to plant hormones. Plant ecdysteroids (phytoecdysteroids) are natural polyhydroxylated compounds that have a four-ringed skeleton, usually composed of either 27 carbon atoms or 28-29 carbon atoms (biosynthetically derived from cholesterol or other plant sterols, respectively). Their physiological roles in plants have not yet been confirmed and their occurrence is not universal. Nevertheless, they are present at high concentrations in various plant species, including commonly consumed vegetables, and have a broad spectrum of pharmacological and medicinal properties in mammals, including hepatoprotective and hypoglycaemic effects, and anabolic effects on skeletal muscle, without androgenic side-effects. Furthermore, phytoecdysteroids can enhance stress resistance by promoting vitality and enhancing physical performance; thus, they are considered adaptogens. This review summarises current knowledge of phytoecdysteroids' biosynthesis, distribution within plants, biological importance and relations to plant hormones.

Plant toxicity, adaptive herbivory, and plant community dynamics

Science.gov (United States)

Feng, Z.; Liu, R.; DeAngelis, D.L.; Bryant, J.P.; Kielland, K.; Stuart, Chapin F.; Swihart, R.K.

2009-01-01

We model effects of interspecific plant competition, herbivory, and a plant's toxic defenses against herbivores on vegetation dynamics. The model predicts that, when a generalist herbivore feeds in the absence of plant toxins, adaptive foraging generally increases the probability of coexistence of plant species populations, because the herbivore switches more of its effort to whichever plant species is more common and accessible. In contrast, toxin-determined selective herbivory can drive plant succession toward dominance by the more toxic species, as previously documented in boreal forests and prairies. When the toxin concentrations in different plant species are similar, but species have different toxins with nonadditive effects, herbivores tend to diversify foraging efforts to avoid high intakes of any one toxin. This diversification leads the herbivore to focus more feeding on the less common plant species. Thus, uncommon plants may experience depensatory mortality from herbivory, reducing local species diversity. The depensatory effect of herbivory may inhibit the invasion of other plant species that are more palatable or have different toxins. These predictions were tested and confirmed in the Alaskan boreal forest. ?? 2009 Springer Science+Business Media, LLC.

[Development of Plant Metabolomics and Medicinal Plant Genomics].

Science.gov (United States)

Saito, Kazuki

2018-01-01

 A variety of chemicals produced by plants, often referred to as 'phytochemicals', have been used as medicines, food, fuels and industrial raw materials. Recent advances in the study of genomics and metabolomics in plant science have accelerated our understanding of the mechanisms, regulation and evolution of the biosynthesis of specialized plant products. We can now address such questions as how the metabolomic diversity of plants is originated at the levels of genome, and how we should apply this knowledge to drug discovery, industry and agriculture. Our research group has focused on metabolomics-based functional genomics over the last 15 years and we have developed a new research area called 'Phytochemical Genomics'. In this review, the development of a research platform for plant metabolomics is discussed first, to provide a better understanding of the chemical diversity of plants. Then, representative applications of metabolomics to functional genomics in a model plant, Arabidopsis thaliana, are described. The extension of integrated multi-omics analyses to non-model specialized plants, e.g., medicinal plants, is presented, including the identification of novel genes, metabolites and networks for the biosynthesis of flavonoids, alkaloids, sulfur-containing metabolites and terpenoids. Further, functional genomics studies on a variety of medicinal plants is presented. I also discuss future trends in pharmacognosy and related sciences.

33 CFR 165.755 - Safety Zone; Guayanilla, Puerto Rico

Science.gov (United States)

2010-07-01

... Zone; Guayanilla, Puerto Rico (a) The following area is established as a safety zone during the... the Eco-Electrica waterfront facility in Guayanilla Bay, Puerto Rico. The safety zone remains in... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Safety Zone; Guayanilla, Puerto...

7 CFR 302.2 - Movement of plants and plant products.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Movement of plants and plant products. 302.2 Section... INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DISTRICT OF COLUMBIA; MOVEMENT OF PLANTS AND PLANT PRODUCTS § 302.2 Movement of plants and plant products. Inspection or documentation of the plant health status of...

9RU2 Radiological protection, attention to the detail-EPU; 9RU2 Proteccion radiologica, atencion al detalle-EPU

Energy Technology Data Exchange (ETDEWEB)

Padilla C, I. [CFE, Central Laguna Verde, Km. 42.5 Carretera Cardel-Nautla, Veracruz (Mexico)]. e-mail: ipadilla@cfe.gob.mx

2008-07-01

To optimize times and movements in a reload project of nuclear fuel in a nuclear plant, where they are programmed more three thousand maintenance activities, modifications, monitoring and inspection in a smaller period to 30 days, and additionally to optimize the individual and collective dose in the same one, turn out to be important challenges where the used strategies must be accompanied of a deep knowledge of the installation in the radiological sense and of the spaces conceptualized in the time. The attention to the detail makes possible that the objectives are fulfilled. During the shutdown of reload 9 of Unit 2 (9RU2) of the nuclear power plant of Laguna Verde, the attention in detail applied in the critical points allowed a saving of dose of 0.7 Sv-person and one deviation of the goal of only +0.85% (smaller to 1% of the goal established like 2 challenge of Sv-person). Analysis of times, movements and training to develop skills in inspection activities in service that requires intervention in the external surface of the reactor vessel to examine the condition of welds, allowed reducing times of execution of 12 to 2 hours. Analysis of the environment and attention to the detail are techniques that allowed optimizing dose in 9RU2 and they were used in the project Power Increase. In this work the strategies of the surroundings and attention in detail applied in 9RU2 would appear and detail attention in the increase of power in the reload 13 Unit 1. (Author)

PLANT BIOPRINTING: NOVEL PERSPECTIVE FOR PLANT BIOTECHNOLOGY

Directory of Open Access Journals (Sweden)

Adhityo WICAKSONO

2015-12-01

Full Text Available Bioprinting is a technical innovation that has revolutionized tissue engineering. Using conventional printer cartridges filled with cells as well as a suitable scaffold, major advances have been made in the biomedical field, and it is now possible to print skin, bones, blood vessels, and even organs. Unlike animal systems, the application of bioprinting in simple plant tissue cells is still in a nascent phase and has yet to be studied. One major advantage of plants is that all living parts are reprogrammable in the form of totipotent cells. Plant bioprinting may improve scientists’understanding of plant shape and morphogenesis, and could serve for the mass production of desired tissues or plants, or even the production of plant-based biomaterial for industrial uses. This perspectives paper explores these possibilities using knowledge on what is known about bioprinting in other biosystems.

Plant responses to plant growth-promoting rhizobacteria

NARCIS (Netherlands)

Loon, L.C. van

2007-01-01

Non-pathogenic soilborne microorganisms can promote plant growth, as well as suppress diseases. Plant growth promotion is taken to result from improved nutrient acquisition or hormonal stimulation. Disease suppression can occur through microbial antagonism or induction of resistance in the plant.

Environmental impact of the programs of substitution of room type air conditioning equipment; Impacto ambiental de los programas de sustitucion de equipos de aire tipo cuarto

Energy Technology Data Exchange (ETDEWEB)

Alarcon Aleman, Jose Mauricio [OLADE, Quito (Ecuador)

2002-09-01

The present article approaches in a general way the relation that exists between the environment and the saving of electrical energy, especially in the Programs of Demand Side Management (DSM). In particular form the potential environmental impacts are described, derived of the use and the discard of the room type air conditioning equipment, goes deep into the characteristics of their cooling fluids, as well as in the relation that these keep with the protocols of Montreal and Kyoto. Finally, this article comments the incidence which have, the manufacturers as the institutions that implement DSM programs, on the environmental part of the programs of substitution of room type air conditioning equipment. In addition it is briefly described, the pilot program developed by Fideicomiso para el Ahorro de Energia Electrica (FIDE) as a successful case. [Spanish] En forma general, el presente articulo aborda la relacion que existe entre el medio ambiente y el ahorro de energia electrica, especialmente en los Programas de Administracion por el Lado de la Demanda (ALD). En forma particular se describen los impactos ambientales potenciales, derivados del uso y desecho de los equipos de aire acondicionado tipo cuarto, se ahonda en las caracteristicas de sus refrigerantes, asi como en la relacion que estos guardan con los protocolos de Montreal y Kioto. Finalmente, se comenta la incidencia que tienen, tanto los fabricantes como las instituciones que implementan programas de ALD, sobre la parte ambiental de los programas de sustitucion de equipos de aire acondicionado tipo cuarto. Ademas se describe brevemente, el programa piloto desarrollado por el Fideicomiso para el Ahorro de Energia Electrica (FIDE) como un caso exitoso.

Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

Energy conservation programs of Pemex exploration and production, south region; Programas de ahorro de energia en Pemex exploracion y produccion, region sur

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Milla, Guillermo; Garcia Juarez, Francisco; Alarcon Aleman, Jose Mauricio [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The technological developments of energy economizing equipment constitute a powerful tool for the conservation and saving of the electric energy in new or existing installations. Petroleos Mexicanos (PEMEX) Exploration and Production initiated in 1997 a program for energy economizing in the South region, for which the Instituto de Investigaciones Electricas, through its Unit for the Use of Energy, collaborated performing energy assessments in 115 buildings of the above mentioned region. This paper describes the employed methodology to carry on the energy assessment, which consisted in an analysis of each building and different options for energy economizing were presented, which was accompanied with cost-benefit studies. The results obtained show that the air conditioning equipment and lighting represent the most important loads permanently connected, therefore the study was concentrated in these two loads [Espanol] Los desarrollos tecnologicos de equipos ahorradores de energia constituyen una poderosa herramienta para la conservacion y el ahorro de energia electrica en instalaciones nuevas o existentes. Petroleos Mexicanos (PEMEX) Exploracion y Produccion inicio en 1997 un programa para el ahorro de energia en la region sur, para lo cual el Instituto de Investigaciones Electricas, a traves de la Unidad de Uso de Energia, colaboro realizando diagnosticos energeticos en 115 edificios de dicha region. En este documento se describe la metodologia utilizada para realizar el diagnostico energetico, el cual consistio en un analisis de cada edificio y se presentaron diversas opciones para ahorrar energia, lo cual se acompano de estudios de costo-beneficio. Los resultados obtenidos muestran que los equipos de aire acondicionado e iluminacion representan la parte mas importante de las cargas conectadas permanentemente, por lo que el estudio se concentro en estas dos cargas

Evaluation of the reliability of electric power transmission systems; Evaluacion de confiabilidad de sistemas de transmision de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Vega Ortiz, Miguel

1989-07-01

algorithm in a digital program, this was proved in a personal computer applying it to IEEE transmission systems evaluated with other methods, among them one of 140 buses and 199 transmission lines. The results as far as reliability indexes compared with the other methods were very satisfactory and promising as far as required CPU time and memory for larger systems. [Spanish] En esta tesis se ataca el problema de la Evaluacion de la Confiabilidad de los Sistemas de Transmision de Energia Electrica para fines de su planeacion integral. Una vez descrito el problema se presentan los indices que miden la confiabilidad de los sistemas electricos de potencia. Despues se describen los metodos para evaluar las redes de transmision, como el de Enumeracion de Contingencias, el Monte Carlo, el de Markov y los metodos para sistemas complejos como el de Cortes Minimos. Este ultimo se desarrolla ampliamente por las ventajas que presenta su aplicacion en la planeacion de redes grandes y complejas. El metodo de cortes minimos consta de dos grandes pasos: Determinar los cortes minimos para los puntos de carga y calcular los indices de confiabilidad en base a los cortes minimos. Los algoritmos convencionales para la determinacion de cortes minimos consideran un problema por cada punto de carga en forma independiente pasando por una determinacion de caminos minimos. En este tipo de algoritmos el tiempo de CPU y el espacio en memoria requeridos crecen exponencialmente para el caso de sistemas de transmision grandes, lo que representa una fuerte restriccion para su aplicacion. Para resolver este problema se establecio una metodologia en la que se modela el sistema por medio de un grafo y se determinan los cortes minimos con un algoritmo basado en la construccion de ciclos en el grafo dual. Con estos cortes se evalua la conexidad y capacidad de la red, obteniendose los indices de confiabilidad para cada bus y para el sistema. Estos indices se calculan con la representacion equivalente para

Application of an evolutionary algorithm in the reactive compensation of transmission networks of electrical energy planning; Aplicacion de un algoritmo evolutivo en la planificacion de la compensacion reactiva de redes de transmision de energia electrica

Energy Technology Data Exchange (ETDEWEB)

Hernandez Galicia, Julio A.; Nieva Gomez, Rolando [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

In the present work it is considered the mathematical formulation of the problem of the reactive compensation planning, The solution technique based on evolutionary programming is described and the results of compensation in the Northwest subsystem of the Mexican electrical system are shown. A technique of optimization based on the Evolutionary Programming is proposed to solve the problem of the Planning of the Reactive Compensation in transmission of electrical energy networks. The problem consists in determining how much compensation to add and where to locate it in such a way that the investment cost of the compensation equipment is diminished, plus the operation costs associated to the transmission losses, plus a penalty function associated to the violations of the operative limits of voltage. The compensation that is determined must allow that the network operates in normal conditions before any contingency of a pre-established assembly. The problem considered is non-linear and whole compound. Tests made to a representative system of the Northwest area of the Mexican electrical system of 171 nodes and 284 branches are reported. [Spanish] En el presente trabajo se plantea la formulacion matematica del problema de planificacion de la compensacion reactiva, se describe la tecnica de solucion basada en programacion evolutiva y se muestra resultados de compensacion en el subsistema Noroeste del sistema electrico mexicano. Se propone una tecnica de optimizacion basada en la Programacion Evolutiva para resolver el problema de la Planificacion de la Compensacion Reactiva en redes de transmision de energia electrica. El problema consiste en determinar cuanta compensacion agregar y donde ubicarla de tal manera que se minimice el costo de inversion del equipo de compensacion, mas los costos de operacion asociados a las perdidas de transmision, mas una funcion de penalizacion asociada a la violaciones de los limites operativos de voltaje. La compensacion que se determine

The iPlant Collaborative: Cyberinfrastructure for Plant Biology

Science.gov (United States)

Goff, Stephen A.; Vaughn, Matthew; McKay, Sheldon; Lyons, Eric; Stapleton, Ann E.; Gessler, Damian; Matasci, Naim; Wang, Liya; Hanlon, Matthew; Lenards, Andrew; Muir, Andy; Merchant, Nirav; Lowry, Sonya; Mock, Stephen; Helmke, Matthew; Kubach, Adam; Narro, Martha; Hopkins, Nicole; Micklos, David; Hilgert, Uwe; Gonzales, Michael; Jordan, Chris; Skidmore, Edwin; Dooley, Rion; Cazes, John; McLay, Robert; Lu, Zhenyuan; Pasternak, Shiran; Koesterke, Lars; Piel, William H.; Grene, Ruth; Noutsos, Christos; Gendler, Karla; Feng, Xin; Tang, Chunlao; Lent, Monica; Kim, Seung-Jin; Kvilekval, Kristian; Manjunath, B. S.; Tannen, Val; Stamatakis, Alexandros; Sanderson, Michael; Welch, Stephen M.; Cranston, Karen A.; Soltis, Pamela; Soltis, Doug; O'Meara, Brian; Ane, Cecile; Brutnell, Tom; Kleibenstein, Daniel J.; White, Jeffery W.; Leebens-Mack, James; Donoghue, Michael J.; Spalding, Edgar P.; Vision, Todd J.; Myers, Christopher R.; Lowenthal, David; Enquist, Brian J.; Boyle, Brad; Akoglu, Ali; Andrews, Greg; Ram, Sudha; Ware, Doreen; Stein, Lincoln; Stanzione, Dan

2011-01-01

The iPlant Collaborative (iPlant) is a United States National Science Foundation (NSF) funded project that aims to create an innovative, comprehensive, and foundational cyberinfrastructure in support of plant biology research (PSCIC, 2006). iPlant is developing cyberinfrastructure that uniquely enables scientists throughout the diverse fields that comprise plant biology to address Grand Challenges in new ways, to stimulate and facilitate cross-disciplinary research, to promote biology and computer science research interactions, and to train the next generation of scientists on the use of cyberinfrastructure in research and education. Meeting humanity's projected demands for agricultural and forest products and the expectation that natural ecosystems be managed sustainably will require synergies from the application of information technologies. The iPlant cyberinfrastructure design is based on an unprecedented period of research community input, and leverages developments in high-performance computing, data storage, and cyberinfrastructure for the physical sciences. iPlant is an open-source project with application programming interfaces that allow the community to extend the infrastructure to meet its needs. iPlant is sponsoring community-driven workshops addressing specific scientific questions via analysis tool integration and hypothesis testing. These workshops teach researchers how to add bioinformatics tools and/or datasets into the iPlant cyberinfrastructure enabling plant scientists to perform complex analyses on large datasets without the need to master the command-line or high-performance computational services. PMID:22645531

The iPlant Collaborative: Cyberinfrastructure for Plant Biology.

Science.gov (United States)

Goff, Stephen A; Vaughn, Matthew; McKay, Sheldon; Lyons, Eric; Stapleton, Ann E; Gessler, Damian; Matasci, Naim; Wang, Liya; Hanlon, Matthew; Lenards, Andrew; Muir, Andy; Merchant, Nirav; Lowry, Sonya; Mock, Stephen; Helmke, Matthew; Kubach, Adam; Narro, Martha; Hopkins, Nicole; Micklos, David; Hilgert, Uwe; Gonzales, Michael; Jordan, Chris; Skidmore, Edwin; Dooley, Rion; Cazes, John; McLay, Robert; Lu, Zhenyuan; Pasternak, Shiran; Koesterke, Lars; Piel, William H; Grene, Ruth; Noutsos, Christos; Gendler, Karla; Feng, Xin; Tang, Chunlao; Lent, Monica; Kim, Seung-Jin; Kvilekval, Kristian; Manjunath, B S; Tannen, Val; Stamatakis, Alexandros; Sanderson, Michael; Welch, Stephen M; Cranston, Karen A; Soltis, Pamela; Soltis, Doug; O'Meara, Brian; Ane, Cecile; Brutnell, Tom; Kleibenstein, Daniel J; White, Jeffery W; Leebens-Mack, James; Donoghue, Michael J; Spalding, Edgar P; Vision, Todd J; Myers, Christopher R; Lowenthal, David; Enquist, Brian J; Boyle, Brad; Akoglu, Ali; Andrews, Greg; Ram, Sudha; Ware, Doreen; Stein, Lincoln; Stanzione, Dan

2011-01-01

The iPlant Collaborative (iPlant) is a United States National Science Foundation (NSF) funded project that aims to create an innovative, comprehensive, and foundational cyberinfrastructure in support of plant biology research (PSCIC, 2006). iPlant is developing cyberinfrastructure that uniquely enables scientists throughout the diverse fields that comprise plant biology to address Grand Challenges in new ways, to stimulate and facilitate cross-disciplinary research, to promote biology and computer science research interactions, and to train the next generation of scientists on the use of cyberinfrastructure in research and education. Meeting humanity's projected demands for agricultural and forest products and the expectation that natural ecosystems be managed sustainably will require synergies from the application of information technologies. The iPlant cyberinfrastructure design is based on an unprecedented period of research community input, and leverages developments in high-performance computing, data storage, and cyberinfrastructure for the physical sciences. iPlant is an open-source project with application programming interfaces that allow the community to extend the infrastructure to meet its needs. iPlant is sponsoring community-driven workshops addressing specific scientific questions via analysis tool integration and hypothesis testing. These workshops teach researchers how to add bioinformatics tools and/or datasets into the iPlant cyberinfrastructure enabling plant scientists to perform complex analyses on large datasets without the need to master the command-line or high-performance computational services.

The iPlant Collaborative: Cyberinfrastructure for Plant Biology

Directory of Open Access Journals (Sweden)

Stephen A Goff

2011-07-01

Full Text Available The iPlant Collaborative (iPlant is a United States National Science Foundation (NSF funded project that aims to create an innovative, comprehensive, and foundational cyberinfrastructure in support of plant biology research (PSCIC, 2006. iPlant is developing cyberinfrastructure that uniquely enables scientists throughout the diverse fields that comprise plant biology to address Grand Challenges in new ways, to stimulate and facilitate cross-disciplinary research, to promote biology and computer science research interactions, and to train the next generation of scientists on the use of cyberinfrastructure in research and education. Meeting humanity's projected demands for agricultural and forest products and the expectation that natural ecosystems be managed sustainably will require synergies from the application of information technologies. The iPlant cyberinfrastructure design is based on an unprecedented period of research community input, and leverages developments in high-performance computing, data storage, and cyberinfrastructure for the physical sciences. iPlant is an open-source project with application programming interfaces that allow the community to extend the infrastructure to meet its needs. iPlant is sponsoring community-driven workshops addressing specific scientific questions via analysis tool integration and hypothesis testing. These workshops teach researchers how to add bioinformatics tools and/or datasets into the iPlant cyberinfrastructure enabling plant scientists to perform complex analyses on large datasets without the need to master the command-line or high-performance computational services.

Aboveground mechanical stimuli affect belowground plant-plant communication.

Science.gov (United States)

Elhakeem, Ali; Markovic, Dimitrije; Broberg, Anders; Anten, Niels P R; Ninkovic, Velemir

2018-01-01

Plants can detect the presence of their neighbours and modify their growth behaviour accordingly. But the extent to which this neighbour detection is mediated by abiotic stressors is not well known. In this study we tested the acclimation response of Zea mays L. seedlings through belowground interactions to the presence of their siblings exposed to brief mechano stimuli. Maize seedling simultaneously shared the growth solution of touched plants or they were transferred to the growth solution of previously touched plants. We tested the growth preferences of newly germinated seedlings toward the growth solution of touched (T_solution) or untouched plants (C_solution). The primary root of the newly germinated seedlings grew significantly less towards T_solution than to C_solution. Plants transferred to T_solution allocated more biomass to shoots and less to roots. While plants that simultaneously shared their growth solution with the touched plants produced more biomass. Results show that plant responses to neighbours can be modified by aboveground abiotic stress to those neighbours and suggest that these modifications are mediated by belowground interactions.

Aboveground mechanical stimuli affect belowground plant-plant communication.

Directory of Open Access Journals (Sweden)

Ali Elhakeem

Full Text Available Plants can detect the presence of their neighbours and modify their growth behaviour accordingly. But the extent to which this neighbour detection is mediated by abiotic stressors is not well known. In this study we tested the acclimation response of Zea mays L. seedlings through belowground interactions to the presence of their siblings exposed to brief mechano stimuli. Maize seedling simultaneously shared the growth solution of touched plants or they were transferred to the growth solution of previously touched plants. We tested the growth preferences of newly germinated seedlings toward the growth solution of touched (T_solution or untouched plants (C_solution. The primary root of the newly germinated seedlings grew significantly less towards T_solution than to C_solution. Plants transferred to T_solution allocated more biomass to shoots and less to roots. While plants that simultaneously shared their growth solution with the touched plants produced more biomass. Results show that plant responses to neighbours can be modified by aboveground abiotic stress to those neighbours and suggest that these modifications are mediated by belowground interactions.

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1999-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

Control integral systems; Sistemas integrales de control

Energy Technology Data Exchange (ETDEWEB)

Burgos, Estrella [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

Almost two third of the electric power generation in Mexico are obtained from hydrocarbons, for that reasons Comision Federal de Electricidad (CFE) dedicated special commitment in modernizing the operation of fossil fuel central stations. In attaining this objective the control systems play a fundamental roll, from them depend a good share of the reliability and the efficiency of the electric power generation process, as well as the extension of the equipment useful life. Since 1984 the Instituto de Investigaciones Electricas (IIE) has been working, upon the request of CFE, on the development of digital control systems. To date it has designed and implemented a logic control system for gas burners, which controls 32 burners of the Unit 4 boiler of the Generation Central of Valle de Mexico and two systems for distributed control for two combined cycle central stations, which are: Dos Bocas, Veracruz Combined cycle central, and Gomez Palacio, Durango combined cycle central. With these two developments the IIE enters the World tendency of implementing distributed control systems for the fossil fuel power central update [Espanol] Casi las dos terceras partes de la generacion electrica en Mexico se obtienen a partir de hidrocarburos, es por eso que la Comision Federal de Electricidad (CFE) puso especial empeno en modernizar la operacion de las centrales termoelectricas de combustibles fosiles. En el logro de este objetivo los sistemas de control desempenan un papel fundamental, de ellos depende una buena parte la confiabilidad y la eficiencia en el proceso de generacion de energia electrica, asi como la prolongacion de la vida util de los equipos. Desde 1984 el Instituto de Investigaciones Electricas (IIE) ha trabajado, a solicitud de la CFE, en el desarrollo de sistemas digitales de control. A la fecha se han disenado e implantado un sistema de control logico de quemadores de gas, el cual controla 32 quemadores de la caldera de la unidad 4 de la central de generacion

Design of plant safety model in plant enterprise engineering environment

International Nuclear Information System (INIS)

Gabbar, Hossam A.; Suzuki, Kazuhiko; Shimada, Yukiyasu

2001-01-01

Plant enterprise engineering environment (PEEE) is an approach aiming to manage the plant through its lifecycle. In such environment, safety is considered as the common objective for all activities throughout the plant lifecycle. One approach to achieve plant safety is to embed safety aspects within each function and activity within such environment. One ideal way to enable safety aspects within each automated function is through modeling. This paper proposes a theoretical approach to design plant safety model as integrated with the plant lifecycle model within such environment. Object-oriented modeling approach is used to construct the plant safety model using OO CASE tool on the basis of unified modeling language (UML). Multiple views are defined for plant objects to express static, dynamic, and functional semantics of these objects. Process safety aspects are mapped to each model element and inherited from design to operation stage, as it is naturally embedded within plant's objects. By developing and realizing the plant safety model, safer plant operation can be achieved and plant safety can be assured

Aquatic plants

DEFF Research Database (Denmark)

Madsen, T. V.; Sand-Jensen, K.

2006-01-01

Aquatic fl owering plants form a relatively young plant group on an evolutionary timescale. The group has developed over the past 80 million years from terrestrial fl owering plants that re-colonised the aquatic environment after 60-100 million years on land. The exchange of species between terre...... terrestrial and aquatic environments continues today and is very intensive along stream banks. In this chapter we describe the physical and chemical barriers to the exchange of plants between land and water.......Aquatic fl owering plants form a relatively young plant group on an evolutionary timescale. The group has developed over the past 80 million years from terrestrial fl owering plants that re-colonised the aquatic environment after 60-100 million years on land. The exchange of species between...

Plants, plant pathogens, and microgravity--a deadly trio

Science.gov (United States)

Leach, J. E.; Ryba-White, M.; Sun, Q.; Wu, C. J.; Hilaire, E.; Gartner, C.; Nedukha, O.; Kordyum, E.; Keck, M.; Leung, H.;

Plant life management optimized utilization of existing nuclear power plants

International Nuclear Information System (INIS)

Watzinger, H.; Erve, M.

1999-01-01

For safe, reliable and economical nuclear power generation it is of central importance to understand, analyze and manage aging-related phenomena and to apply this information in the systematic utilization and as-necessary extension of the service life of components and systems. An operator's overall approach to aging and plant life management which also improves performance characteristics can help to optimize plant operating economy. In view of the deregulation of the power generation industry with its increased competition, nuclear power plants must today also increasingly provide for or maintain a high level of plant availability and low power generating costs. This is a difficult challenge even for the newest, most modern plants, and as plants age they can only remain competitive if a plant operator adopts a strategic approach which takes into account the various aging-related effects on a plant-wide basis. The significance of aging and plant life management for nuclear power plants becomes apparent when looking at their age: By the year 2000 roughly fifty of the world's 434 commercial nuclear power plants will have been in operation for thirty years or more. According to the International Atomic Energy Agency, as many as 110 plants will have reached the thirty-year service mark by the year 2005. In many countries human society does not push the construction of new nuclear power plants and presumably will not change mind within the next ten years. New construction licenses cannot be expected so that for economical and ecological reasons existing plants have to be operated unchallengeably. On the other hand the deregulation of the power production market is asking just now for analysis of plant life time to operate the plants at a high technical and economical level until new nuclear power plants can be licensed and constructed. (author)

Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

Energy Technology Data Exchange (ETDEWEB)

Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

1998-12-31

It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

Program integration at JVC Industrial de Mexico, S.A. de C.V./Electric energy saving/Environmental management system /ISO 14001 standard; Integracion de programas en JVC Industrial de Mexico, S.A. de C.V. Ahorro de energia electrica/Sistema de administracion ambiental/Estandar ISO 14001

Energy Technology Data Exchange (ETDEWEB)

Argote Molina, Martin [JVC Industrial de Mexico S. A. de C. V., Tijuana (Mexico)

1999-12-31

It is possible, and besides logic, the integration of programs such as the electric energy saving and an environmental management system. In managing the consumption and the demand of the electric service, there is an effect on the pollutants emitted for the generation. It is clear that the user in not, and can not be, responsible for the type of fuel used but its importance in project planning is out of question. In its turn the central point of the environmental management system, consists in identifying the main effects on the environment caused by its activities, services and products, as well as the current or potential control level of the enterprise on them. Such identification and further evaluation took us at JVC Industrial de Mexico, to integrate conceptually and operationally such programs. The commitment with the Management was concentrated and strengthened resulting in a fuller consciousness of resource administration. [Espanol] Es posible, ademas de logica, la integracion de programas tales como el ahorro de energia electrica y un sistema de administracion ambiental. Al administrar el consumo y la demanda del servicio electrico tenemos un efecto en los contaminantes emitidos para la generacion. Es claro que el usuario no es, ni puede ser, responsable del tipo de combustible utilizado pero su importancia en la planeacion de proyectos es indiscutible. A su vez el punto central del sistema de administracion ambiental, consiste en identificar los principales efectos en el medio ambiente causados por sus actividades, servicios o productos, asi como el nivel de control actual o potencial de la empresa sobre ellos. Dicha identificacion y la posterior evaluacion nos llevo, en JVC Industrial de Mexico, a integrar tanto conceptual como operacionalmente dichos programas. El compromiso de la Gerencia se vio concentrado y fortalecido dando como resultado una conciencia mas plena de la administracion de recursos.

Dipping Strawberry Plants in Fungicides before Planting to Control Anthracnose

Directory of Open Access Journals (Sweden)

Myeong Hyeon Nam

2014-03-01

Full Text Available Anthracnose crown rot (ACR, caused by Colletotrichum fructicola, is a serious disease of strawberry in Korea. The primary inoculums of ACR were symptomless strawberry plants, plant debris, and other host plants. To effectively control anthracnose in symptomless transplanted strawberries, it is necessary to use diseasefree plants, detect the disease early, and apply a fungicide. Therefore, in 2010 and 2011, we evaluated the efficacy of pre-plant fungicide dips by using strawberry transplants infected by C. fructicola for the control of anthracnose. Dipping plants in prochloraz-Mn for 10 min before planting was most effective for controlling anthracnose in symptomless strawberry plants and resulted in more than 76% control efficacy. Azoxystrobin showed a control efficacy of over 40%, but plants treated with pyraclostrobin, mancozeb and iminoctadine tris showed high disease severity. The control efficacy of the dip treatment with prochloraz-Mn did not differ with temperature and time. Treatment with prochloraz-Mn for more than an hour caused growth suppression in strawberry plants. Therefore, the development of anthracnose can be effectively reduced by dipping strawberry plants for 10 min in prochloraz-Mn before planting.

Plant traits related to nitrogen uptake influence plant-microbe competition.

Science.gov (United States)

Moreau, Delphine; Pivato, Barbara; Bru, David; Busset, Hugues; Deau, Florence; Faivre, Céline; Matejicek, Annick; Strbik, Florence; Philippot, Laurent; Mougel, Christophe

2015-08-01

Plant species are important drivers of soil microbial communities. However, how plant functional traits are shaping these communities has received less attention though linking plant and microbial traits is crucial for better understanding plant-microbe interactions. Our objective was to determine how plant-microbe interactions were affected by plant traits. Specifically we analyzed how interactions between plant species and microbes involved in nitrogen cycling were affected by plant traits related to 'nitrogen nutrition in interaction with soil nitrogen availability. Eleven plant species, selected along an oligotrophic-nitrophilic gradient, were grown individually in a nitrogen-poor soil with two levels of nitrate availability. Plant traits for both carbon and nitrogen nutrition were measured and the genetic structure and abundance of rhizosphere. microbial communities, in particular the ammonia oxidizer and nitrate reducer guilds, were analyzed. The structure of the bacterial community in the rhizosphere differed significantly between plant species and these differences depended on nitrogen availability. The results suggest that the rate of nitrogen uptake per unit of root biomass and per day is a key plant trait, explaining why the effect of nitrogen availability on the structure of the bacterial community depends on the plant species. We also showed that the abundance of nitrate reducing bacteria always decreased with increasing nitrogen uptake per unit of root biomass per day, indicating that there was competition for nitrate between plants and nitrate reducing bacteria. This study demonstrates that nitrate-reducing microorganisms may be adversely affected by plants with a high nitrogen uptake rate. Our work puts forward the role of traits related to nitrogen in plant-microbe interactions, whereas carbon is commonly considered as the main driver. It also suggests that plant traits related to ecophysiological processes, such as nitrogen uptake rates, are more

Status report - expert knowledge of operators in fuel reprocessing plants, enrichment plants and fuel fabrication plants

International Nuclear Information System (INIS)

Preuss, W.; Kramer, J.; Wildberg, D.

1987-01-01

The necessary qualifications of the responsible personnel and the knowledge required by personnel otherwise employed in nuclear plants are among the requirements for licensing laid down in paragraph 7 of the German Atomic Energy Act. The formal regulations for nuclear power plants are not directly applicable to plants in the fuel cycle because of the differences in the technical processes and the plant and work organisation. The aim of the project was therefore to establish a possible need for regulations for the nuclear plants with respect to the qualification of the personnel, and to determine a starting point for the definition of the required qualifications. An extensive investigation was carried out in the Federal Republic of Germany into: the formal requirements for training; the plant and personnel organisation structures; the tasks carried out by the responsible and otherwise employed personnel; and the state of training. For this purpose plant owners and managers were interviewed and the literature and plant specific documentation (e.g. plant rules) were reviewed. On the basis of literature research, foreign practices were determined and used to make comparative evaluations. The status report is divided into three separate parts for the reprocessing, the uranium enrichment, and the manufacture of the fuel elements. On the basis of the situation for reprocessing plants (particularly that of the WAK) and fuel element manufacturing plants, the development of a common (not uniform) regulation for all the examined plants in the fuel cycle was recommended. The report gives concrete suggestions for the content of the regulations. (orig.) [de

Conservation law of plants' energy value dependence of plants ...

African Journals Online (AJOL)

The plants differences in biochemical composition are analyzed, and the conservation law of energy value in plants is obtained. The link between the need for the nutrients and the plants biochemical composition is examined, Liebig's law is specified. Keywords: plant's biochemical composition, biochemistry, energy value in ...

An Automated and Continuous Plant Weight Measurement System for Plant Factory.

Science.gov (United States)

Chen, Wei-Tai; Yeh, Yu-Hui F; Liu, Ting-Yu; Lin, Ta-Te

2016-01-01

In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analog electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications.

An Automated and Continuous Plant Weight Measurement System for Plant Factory

Directory of Open Access Journals (Sweden)

Wei-Tai eChen

2016-03-01

Full Text Available In plant factories, plants are usually cultivated in nutrient solution under a controllable environment. Plant quality and growth are closely monitored and precisely controlled. For plant growth evaluation, plant weight is an important and commonly used indicator. Traditional plant weight measurements are destructive and laborious. In order to measure and record the plant weight during plant growth, an automated measurement system was designed and developed herein. The weight measurement system comprises a weight measurement device and an imaging system. The weight measurement device consists of a top disk, a bottom disk, a plant holder and a load cell. The load cell with a resolution of 0.1 g converts the plant weight on the plant holder disk to an analogue electrical signal for a precise measurement. The top disk and bottom disk are designed to be durable for different plant sizes, so plant weight can be measured continuously throughout the whole growth period, without hindering plant growth. The results show that plant weights measured by the weight measurement device are highly correlated with the weights estimated by the stereo-vision imaging system; hence, plant weight can be measured by either method. The weight growth of selected vegetables growing in the National Taiwan University plant factory were monitored and measured using our automated plant growth weight measurement system. The experimental results demonstrate the functionality, stability and durability of this system. The information gathered by this weight system can be valuable and beneficial for hydroponic plants monitoring research and agricultural research applications.

Plant walkdown

International Nuclear Information System (INIS)

Kostov, M.

2000-01-01

This report covers the following: preparatory steps for performing plant walk-down; the objective of the first plant walk-down; plant walk-down procedures; earthquake screening evaluation; walk-down documentation; second plant walk-down. The following objectives concerning the plant walk-down(s) were achieved. The plant system configuration is verified in order to proceed with event tree and fault tree analyses. Systems interactions, other types of dependencies or plant unique features are identified. he safety related components that are judged to generically possess high capacities (i.e., larger than the earthquake review level) have been verified to contain no weaknesses. Further analyses needed to establish the capacities of remaining safety-related components are identified and necessary field data are obtained. Information on components is obtained to assist in HCLPF (fragility) evaluation and peer review of the seismic margin study

Development of a Publications and Conferences Data Base in the Mexican Electric Power Research Institute.

Science.gov (United States)

Ripoll, C. Lopez Cerdan; And Others

This paper describes the development by the Mexican Electric Power Research Institute (Instituto de Investigaciones Electricas or IIE) over a 10-year period of a publications and conferences database (PCDB) of research and development output of the institute. The paper begins by listing the objectives of the database and describing data coverage…

The Nuclear Safety Council's Instruction IS-30 on program requirements of fire protection at nuclear power plants; La instruccion IS-30 del consejo de Seguridad Nuclear sobre requisitos del programa de proteccion contraincendios en centrales nucleares

Energy Technology Data Exchange (ETDEWEB)

Peco, J.

2015-07-01

The Nuclear Safety Councils Instrumentation IS-30 is the standard that establishes the fire protection program requirements for the Spanish nuclear power plants with operating license in order to satisfy the two fire protection objectives, which are the adoption of the defense-in-depth principle for fire protection and, by fire area confinement, to ensure that one train of components needed to achieve and maintain the safe shutdown conditions is free of fire damage, and that radioactive liberation is minimized. (Author)

Advanced plant design recommendations from Cook Nuclear Plant experience

International Nuclear Information System (INIS)

Zimmerman, W.L.

1993-01-01

A project in the American Electric Power Service Corporation to review operating and maintenance experience at Cook Nuclear Plant to identify recommendations for advanced nuclear plant design is described. Recommendations so gathered in the areas of plant fluid systems, instrument and control, testing and surveillance provisions, plant layout of equipment, provisions to enhance effective maintenance, ventilation systems, radiological protection, and construction, are presented accordingly. An example for a design review checklist for effective plant operations and maintenance is suggested

Specification for the interconnection to a electric network of low tension of photovoltaic systems with 30 kW of capacity; Especificacion para la interconexion a la red electrica de baja tension de sistemas fotovoltaicos con capacidad hasta 30kW

Energy Technology Data Exchange (ETDEWEB)

Garcia Gutierrez, Jose [Comision Federal de Electricidad, Mexico (Mexico)

2007-06-15

In this presentation, there are shown the details of the photovoltaic systems interconnected with the electric network (SFVI), carried out by the Mexico's Federal Electricity Commission (CFE) with the support of the Mexican Electric Research Institute (IIE). First of all, there are found the objectives of the photovoltaic system interconnected to the electric network (SFVI). Then, there are mentioned the places where such sort of systems could be installed; besides, it is shown a diagram explaining the process of such systems. At the same time, there are briefly explained the components that are necessaries for their properly operation. Some of the elements previously mentioned are: photovoltaic generator (GFV), inverter, interface, and logic circuits and the control. It is shown a diagram with the location of the electrical disconnect switches. Then, it is shortly explained the place where the SFVI should be connected and there are given some requisites that are important to fulfill in order to have everything updated. Finally, it is mentioned the methodology that should be followed in order to supervise that everything works in a properly way, this last issue is carried out by CFE. [Spanish] En esta presentacion se presentan los pormenores del sistema fotovoltaico interconectado a la red (SFVI), realizado por la Comision federal de Electricidad (CFE) con apoyo del Instituto de Investigaciones Electricas (IIE). En primer lugar, se encuentran los objetivos que tiene el uso de SFVI. Enseguida, se muestra un diagrama que explica el proceso que dichos sistemas realizan. Asimismo, se explican brevemente los elementos que, de uno u otro modo, son necesarios para el adecuado funcionamiento del SFV. Ademas, se muestra un diagrama con la ubicacion de los interruptores de desconexion. Luego, se explica escuetamente el lugar donde se debe de conectar el SFVI, ademas de algunas condiciones que se deben de cumplir para que no haya mayores contratiempos. Finalmente, se

Site characterization for hybrid system construction

Energy Technology Data Exchange (ETDEWEB)

Saldana, R.; Miranda, U.; Medrano, M. C. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The basic reason to use alternative systems for electricity generation, in most cases, is the lack of electricity services, such as isolated rural communities which are located far away from the electric distribution line, and the cost of its extension is too expensive, while decentralized power systems can be an economic and appropriate solution to providing these services. Up to now there are several technological options for rural electrification using PV modules, wind plants, water-power plants, anaerobic digesters, or a combination of some of them, according to the availability of energetic resources. The applications include centralized or decentralized systems, autonomous or hybrid systems, isolated or interconnected to the electric line, etc. A particular hybrid system design can be done considering two general aspects, first it is necessary to know the electric consumption that will be supplied, taking into account present and future necessities and how local energetic resources are present in a selected site. Finally, also it is necessary to carry out an economic analysis to determine the cost of kilowatt-hour generated using local energetic resources and compare it with the cost of electricity produced by conventional power systems. [Espanol] La razon principal para el uso de sistemas alternativos de generacion de electricidad, en la mayoria de los casos, es la falta de servicios de electricidad, tal como en las comunidades rurales aisladas localizadas lejos de linea de distribucion electrica, donde el costo de su extension es demasiado caro, mientras que los sistemas descentralizados de energia pueden ser una solucion economica y adecuada para proporcionar estos servicios. Hasta ahora existen varias opciones tecnologicas para la electrificacion rural usando modulos fotovoltaicos, aerogeneradores, plantas hidroelectricas, digestores anaerobicos o una combinacion de algunos de ellos, de acuerdo con la disponibilidad de los recursos energeticos. Las

Site characterization for hybrid system construction

Energy Technology Data Exchange (ETDEWEB)

Saldana, R; Miranda, U; Medrano, M C [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The basic reason to use alternative systems for electricity generation, in most cases, is the lack of electricity services, such as isolated rural communities which are located far away from the electric distribution line, and the cost of its extension is too expensive, while decentralized power systems can be an economic and appropriate solution to providing these services. Up to now there are several technological options for rural electrification using PV modules, wind plants, water-power plants, anaerobic digesters, or a combination of some of them, according to the availability of energetic resources. The applications include centralized or decentralized systems, autonomous or hybrid systems, isolated or interconnected to the electric line, etc. A particular hybrid system design can be done considering two general aspects, first it is necessary to know the electric consumption that will be supplied, taking into account present and future necessities and how local energetic resources are present in a selected site. Finally, also it is necessary to carry out an economic analysis to determine the cost of kilowatt-hour generated using local energetic resources and compare it with the cost of electricity produced by conventional power systems. [Espanol] La razon principal para el uso de sistemas alternativos de generacion de electricidad, en la mayoria de los casos, es la falta de servicios de electricidad, tal como en las comunidades rurales aisladas localizadas lejos de linea de distribucion electrica, donde el costo de su extension es demasiado caro, mientras que los sistemas descentralizados de energia pueden ser una solucion economica y adecuada para proporcionar estos servicios. Hasta ahora existen varias opciones tecnologicas para la electrificacion rural usando modulos fotovoltaicos, aerogeneradores, plantas hidroelectricas, digestores anaerobicos o una combinacion de algunos de ellos, de acuerdo con la disponibilidad de los recursos energeticos. Las

PlantDB – a versatile database for managing plant research

Directory of Open Access Journals (Sweden)

Gruissem Wilhelm

2008-01-01

Full Text Available Abstract Background Research in plant science laboratories often involves usage of many different species, cultivars, ecotypes, mutants, alleles or transgenic lines. This creates a great challenge to keep track of the identity of experimental plants and stored samples or seeds. Results Here, we describe PlantDB – a Microsoft® Office Access database – with a user-friendly front-end for managing information relevant for experimental plants. PlantDB can hold information about plants of different species, cultivars or genetic composition. Introduction of a concise identifier system allows easy generation of pedigree trees. In addition, all information about any experimental plant – from growth conditions and dates over extracted samples such as RNA to files containing images of the plants – can be linked unequivocally. Conclusion We have been using PlantDB for several years in our laboratory and found that it greatly facilitates access to relevant information.

Top 10 plant viruses in molecular plant pathology.

Science.gov (United States)

Scholthof, Karen-Beth G; Adkins, Scott; Czosnek, Henryk; Palukaitis, Peter; Jacquot, Emmanuel; Hohn, Thomas; Hohn, Barbara; Saunders, Keith; Candresse, Thierry; Ahlquist, Paul; Hemenway, Cynthia; Foster, Gary D

2011-12-01

Many scientists, if not all, feel that their particular plant virus should appear in any list of the most important plant viruses. However, to our knowledge, no such list exists. The aim of this review was to survey all plant virologists with an association with Molecular Plant Pathology and ask them to nominate which plant viruses they would place in a 'Top 10' based on scientific/economic importance. The survey generated more than 250 votes from the international community, and allowed the generation of a Top 10 plant virus list for Molecular Plant Pathology. The Top 10 list includes, in rank order, (1) Tobacco mosaic virus, (2) Tomato spotted wilt virus, (3) Tomato yellow leaf curl virus, (4) Cucumber mosaic virus, (5) Potato virus Y, (6) Cauliflower mosaic virus, (7) African cassava mosaic virus, (8) Plum pox virus, (9) Brome mosaic virus and (10) Potato virus X, with honourable mentions for viruses just missing out on the Top 10, including Citrus tristeza virus, Barley yellow dwarf virus, Potato leafroll virus and Tomato bushy stunt virus. This review article presents a short review on each virus of the Top 10 list and its importance, with the intent of initiating discussion and debate amongst the plant virology community, as well as laying down a benchmark, as it will be interesting to see in future years how perceptions change and which viruses enter and leave the Top 10. © 2011 The Authors. Molecular Plant Pathology © 2011 BSPP and Blackwell Publishing Ltd.

Nuclear power plants

International Nuclear Information System (INIS)

1985-01-01

Data concerning the existing nuclear power plants in the world are presented. The data was retrieved from the SIEN (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: nuclear plants, its status and type; installed nuclear power plants by country; nuclear power plants under construction by country; planned nuclear power plants by country; cancelled nuclear power plants by country; shut-down nuclear power plants by country. (E.G.) [pt

Evolutionary responses of native plant species to invasive plants : a review

OpenAIRE

Oduor, Ayub M. O.

2013-01-01

Strong competition from invasive plant species often leads to declines in abundances and may,in certain cases, cause localized extinctions of native plant species. Nevertheless, studies have shown that certain populations of native plant species can co-exist with invasive plant species, suggesting the possibility of adaptive evolutionary responses of those populations to the invasive plants. Empirical inference of evolutionary responses of the native plant species to invasive plants has invol...

MYDOZE: Application Web for management and optimisation of doses to patients in tests radiodiagnostics

International Nuclear Information System (INIS)

Peinado Zamora, A. B.; Laguna Lobato, M. A.; Gil Agudo, A.; Zapata Jimenez, J. C.

2013-01-01

The service of Radiofisica y Proteccion Radiologica del Hospital general Universitario de Ciudad Real, carried out a study whose objective is to optimize the dose to patients undergoing diagnostic scans with ionizing radiation. To address this task, is required a software tool that facilitates on the one hand the acquisition of dosimetric data acquired digital equipment and the other interface of exploitation of this data for statistics and analysis of these. the computer tool to develop should allow storing parameters with information demographic and dose of the patient in medical scans thanks to called DICOM medical image standard. (Author)

Prevención de incendios provocados por causas eléctricas en centros comerciales

OpenAIRE

Ñauta Chuisaca, Pedro Santiago; Ulloa Duran, Marco Javier

2009-01-01

A lo largo del tiempo se ha venido dando muchos incendios en la ciudad y en todo el país. Estos incendios son debidos a diversas causas, siendo las más señaladas por parte de la población y el personal que mitiga e investiga los mismos las de origen eléctrico, principalmente los cortocircuitos. Por tal razón se ha visto necesario establecer un marco de referencia en donde indique cuales son las causas eléctricas que pueden provocar incendios, para luego indicar las protecciones y medidas nece...

MYDOZE: Application Web for management and optimisation of doses to patients in tests radiodiagnostics; MYDOZE: Aplicacion Web para gestion y optimizacion de dosis a pacientes en pruebas radiodiagnosticas

Energy Technology Data Exchange (ETDEWEB)

Peinado Zamora, A. B.; Laguna Lobato, M. A.; Gil Agudo, A.; Zapata Jimenez, J. C.

2013-07-01

The service of Radiofisica y Proteccion Radiologica del Hospital general Universitario de Ciudad Real, carried out a study whose objective is to optimize the dose to patients undergoing diagnostic scans with ionizing radiation. To address this task, is required a software tool that facilitates on the one hand the acquisition of dosimetric data acquired digital equipment and the other interface of exploitation of this data for statistics and analysis of these. the computer tool to develop should allow storing parameters with information demographic and dose of the patient in medical scans thanks to called DICOM medical image standard. (Author)

Co-generation system with integrated functions of active filter; Sistema de cogeneracion con funciones de filtro activo integradas

Energy Technology Data Exchange (ETDEWEB)

Jimenez Grajales, Humberto Raul

2002-07-15

adaptive interference. This technique maintains the system in the best functional state, by means of continuous self adjustment facing changes in the operation parameters, generating important and satisfactory results. In addition, simultaneously the PVS uses, in the pursuit of the point of maximum power, the technique of {sup d}isturb and observe{sup ,} which offers a high performance in the injection of active power. [Spanish] Sin duda, la energia electrica es la forma de energia mas ampliamente usada en las actividades economicas y sociales de nuestro mundo moderno. Por ello, se puede decir que las companias generadoras y distribuidoras de electricidad asumen dos retos de relevante preocupacion actual. Uno es generar con mayor eficiencia, menor costo y con un minimo impacto sobre el medio ambiente. El segundo es cumplir con la calidad del suministro, que ha llegado a ser un punto importante tanto para los usuarios como para las companias que distribuyen la energia electrica, y que se refleja en una distribucion y un consumo de energia mas eficiente. El trabajo de tesis que se presenta, describe un sistema fotovoltaico (SFV) interconectado a la red electrica que ayuda a superar los retos citados. Este SFV tiene la funcion de recibir la energia solar entregada por un arreglo de celdas FV; operar en el punto maximo de potencia de las celdas (para mayor aprovechamiento de la energia captada); acondicionarla a una senal alterna, dentro de los parametros tecnicos normativos para la interconexion electrica (establecidos por la compania; Comision Federal de Electricidad en Mexico); e inyectarla a la red electrica con el proposito de compensar potencia reactiva (filtrado activo) demandada por cargas lineales y no lineales, reduciendo la contaminacion de la red electrica; ademas de compensar potencia activa en los picos de demanda de energia electrica maxima. El sistema funciona como filtro activo durante todo el dia, lo que permite que la capacidad de potencia instalada por el

[Review on application of plant growth retardants in medicinal plants cultivation].

Science.gov (United States)

Zhai, Yu-Yao; Guo, Bao-Lin; Cheng, Ming

2013-09-01

Plant growth retardants are widely used in cultivation of medicinal plant, but there is still lack of scientific guidance. In order to guide the use of plant growth retardants in medicinal plant cultivation efficiently and reasonably, this paper reviewed the mechanism, function characteristic, plant and soil residue of plant growth retardants, such as chlorocholine chloride, mepiquat chloride, paclobutrazol, unicnazle and succinic acid, and summarized the application of plant growth retardants in medicinal plants cultivation in recent years, with focus on the effect of growth and yield of the officinal organs and secondary metabolites.

Evolutionary responses of native plant species to invasive plants: a review.

Science.gov (United States)

Oduor, Ayub M O

2013-12-01

Strong competition from invasive plant species often leads to declines in abundances and may, in certain cases, cause localized extinctions of native plant species. Nevertheless, studies have shown that certain populations of native plant species can co-exist with invasive plant species,suggesting the possibility of adaptive evolutionary responses of those populations to the invasive plants. Empirical inference of evolutionary responses of the native plant species to invasive plants has involved experiments comparing two conspecific groups of native plants for differences in expression of growth/reproductive traits: populations that have experienced competition from the invasive plant species (i.e. experienced natives) versus populations with no known history of interactions with the invasive plant species (i.e. naıve natives). Here, I employ a meta-analysis to obtain a general pattern of inferred evolutionary responses of native plant species from 53 such studies. In general, the experienced natives had significantly higher growth/reproductive performances than naıve natives, when grown with or without competition from invasive plants.While the current results indicate that certain populations of native plant species could potentially adapt evolutionarily to invasive plant species, the ecological and evolutionary mechanisms that probably underlie such evolutionary responses remain unexplored and should be the focus of future studies.

Calculate the high solar radiation for photovoltaic panels in Chile; Aproximacio al calculo de la oferta de energia por paneles fotovoltaicos en Chile

Energy Technology Data Exchange (ETDEWEB)

Cancino, Beatriz; Roth, Pedro; Stolz, German [Universidad Tecnica Federico Santa Maria, Valparaiso (Chile); Bonneschky, Alexis [Cottbus University, Cottbus (Germany)

2000-07-01

The aim of this work was to develop a method which permits to calculate and predict the theoretically possible electrical energy which can be obtained in different places in Chile with photovoltaic panels used in solar home systems. Chile is a country with a high solar radiation, specially in its northern part, between parallels 18 degrees with a daily mean energy of 4600 Wh/m{sup 2} over the year and 37 degrees, with 3700 Wh/m{sup 2}. Therefore, the use of photovoltaic power is an interesting alternative to be studied and used. Nevertheless, the photovoltaic possibilities have not been studied and no evaluation of real possibilities exist. In a previous paper, the absence of an installation guide for solar home systems have been mentioned. And also the lack of information regarding the real electrical energy needs of people. This work pretends to be the first approximation to a detailed chart and list of possible electric supplies using photovoltaic panels in different locations of Chile. It is made with a computer program which permits to calculate the solar radiation on a tilted surface, on a hourly bases. It uses geographical data and the daily average of monthly radiation. Therefore, the hourly energy, harnessed by the panel can be established and the total energy for some place calculated. [Spanish] El objetivo de este trabajo, es el de mostrar a traves de un listado y un mapa nacional, la cantidad teorica de energia electrica que puede ser obtenida a traves del uso de paneles fotovoltaicos principalmente destinados a Solar Home System (SHS) en Chile. Chile es un pais con una alta oferta de energia solar ubicada principalmente en la zona norte y centro del pais, aproximadamente entre los paralelos 18 grados (sobre 4600 Wh/m{sup 2} dia promedio anual) y 37 grados Sur (sobre 3700 Wh/m{sup 2} dia promedio anual). Por lo que el uso de paneles fotovoltaicos representa una alternativa interesante de ser estudiada y aprovechada. Sin embargo, no existe una evaluacion

Evaluation of a process for the removal of gases contained in geothermal steam through condensation and re-evaporation; Evaluacion de un proceso de remocion de gases contenidos en el vapor geotermico, por medio de la condensacion y de revaporacion

Energy Technology Data Exchange (ETDEWEB)

Angulo C, Raul; Lam Rea, Luis; Garmino, Hector; Jimenez, Humberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

The Cerro Prieto I Geothermal Field, developed and operated by the Comision Federal de Electricidad (CFE), has currently an installed electric power generation capacity of 180 MW and is at a very advanced stage in the development of Cerro Prieto II and III, which will allow to raise the generation capacity to 620 MW. During the exploitation of a geothermal field, in producing steam with the purpose of generating electricity, brines and waste gases are obtained. The hydrogen sulfide exhaust to the environment implies pollution problems, for this reason processes have been developed for the oxidation of these gases downstream the turbogenerator either in the flow of separated gases in the steam condensation or in the condensate produced. The Instituto de Investigaciones Electricas (IIE) has collaborated with CFE in the evaluation of the environmental impact of this gas and in the development of the processes for its abatement. [Espanol] El campo geotermico de Cerro Prieto I, desarrollado y operado por la Comision Federal de Electricidad (CFE), actualmente tiene una capacidad instalada de generacion de energia electrica de 180 MW, y se encuentra en etapa muy avanzada, el desarrollo de Cerro Prieto II y III, lo que permitira incrementar la capacidad de generacion a 620 MW. Durante la explotacion de un campo geotermico, al producir vapor con el proposito de generar electricidad, se obtienen salmueras y gases de desecho. La descarga de acido sulfhidrico a la atmosfera implica problemas de contaminacion, por esta razon se han desarrollado procesos para la oxidacion de este gas aguas abajo de la turbina generadora, ya sea en la corriente de gases que se separan en la condensacion del vapor o en el condensado producido. El Instituto de Investigaciones Electricas (IIE) ha colaborado con la CFE en la evaluacion del impacto ambiental de este gas y en el desarrollo de sus procesos de abatimiento.

Evaluation of a process for the removal of gases contained in geothermal steam through condensation and re-evaporation; Evaluacion de un proceso de remocion de gases contenidos en el vapor geotermico, por medio de la condensacion y de revaporacion

Energy Technology Data Exchange (ETDEWEB)

Angulo C, Raul; Lam Rea, Luis; Garmino, Hector; Jimenez, Humberto [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1985-12-31

The Cerro Prieto I Geothermal Field, developed and operated by the Comision Federal de Electricidad (CFE), has currently an installed electric power generation capacity of 180 MW and is at a very advanced stage in the development of Cerro Prieto II and III, which will allow to raise the generation capacity to 620 MW. During the exploitation of a geothermal field, in producing steam with the purpose of generating electricity, brines and waste gases are obtained. The hydrogen sulfide exhaust to the environment implies pollution problems, for this reason processes have been developed for the oxidation of these gases downstream the turbogenerator either in the flow of separated gases in the steam condensation or in the condensate produced. The Instituto de Investigaciones Electricas (IIE) has collaborated with CFE in the evaluation of the environmental impact of this gas and in the development of the processes for its abatement. [Espanol] El campo geotermico de Cerro Prieto I, desarrollado y operado por la Comision Federal de Electricidad (CFE), actualmente tiene una capacidad instalada de generacion de energia electrica de 180 MW, y se encuentra en etapa muy avanzada, el desarrollo de Cerro Prieto II y III, lo que permitira incrementar la capacidad de generacion a 620 MW. Durante la explotacion de un campo geotermico, al producir vapor con el proposito de generar electricidad, se obtienen salmueras y gases de desecho. La descarga de acido sulfhidrico a la atmosfera implica problemas de contaminacion, por esta razon se han desarrollado procesos para la oxidacion de este gas aguas abajo de la turbina generadora, ya sea en la corriente de gases que se separan en la condensacion del vapor o en el condensado producido. El Instituto de Investigaciones Electricas (IIE) ha colaborado con la CFE en la evaluacion del impacto ambiental de este gas y en el desarrollo de sus procesos de abatimiento.

Condensers for measuring steam quality at the inlet of back-pressure units of the Los Azufres, Mich., geothermal field; Condensadores para medir la calidad del vapor a la entrada de las turbinas a contrapresion del campo geotermico de Los Azufres, Mich.

Energy Technology Data Exchange (ETDEWEB)

Sandoval Medina, Fernando; Gonzalez Gonzalez, Rubi; Reyes Delgado, Lisette; Medina Martinez, Moises [Comision Federal de Electricidad, Gerencia de Proyectos Geotermoelectricos, Residencia de Los Azufres (Mexico)]. E-mail: fernando.sandoval@cfe.gob.mx

2007-01-15

Electrical conductivity is an indirect measurement of the quality of the steam supplied to power units. In the Los Azufres, Mich., geothermal field, the electrical conductivity once was measured in a discrete and periodic way by condensing steam samples through a water-cooled condenser. In an attempt to continuously measure conductivity, conductivity meters were installed where the units discharged, but the values proved unstable and unrepresentative. Thereafter, taking into account that steam quality should be measured at the steam delivery-reception point, equipment was designed and tested for continuously condensing steam. Finally it was possible to get an air-cooled condenser able to condense 500 milliliters per minute, enough to collect a representative flow of the steam and to measure its electrical conductivity. The equipment was installed in all seven back-pressure units operating in the field and to date has been operating in an optimal manner. [Spanish] La conductividad electrica es una medida indirecta de la calidad del vapor que se suministra a las unidades turbogeneradoras. En el campo geotermico de Los Azufres, Mich., la conductividad electrica se media en forma puntual y periodica, condensando muestras de vapor por medio de un serpentin enfriado con agua. Despues, ante la necesidad de medirla en forma continua, se instalaron conductivimetros en las descargas de las unidades, pero los valores resultaron muy inestables y poco representativos. Considerando, ademas, que la calidad del vapor debe medirse en el punto de entrega-recepcion, se disenaron y probaron equipos para condensar vapor de manera continua, lograndose construir un condensador enfriado por aire que logra condensar un flujo de 500 mililitros por minuto, cantidad suficiente para tener un flujo representativo del vapor que alimenta a las turbinas y medirle su conductividad electrica. Se instalaron estos equipos en las siete unidades turbogeneradoras a contrapresion que funcionan en el campo

Analysis of plant height between male sterile plants obtained by space flight and male fertile plants in Maize

International Nuclear Information System (INIS)

Cao Moju; Huang Wenchao; Pan Guangtang; Rong Tingzhao; Zhu Yingguo

2004-01-01

F 2 fertility segregation population and the sister-cross fertility segregation population, which descended from the male sterile material, were analysed by their plant height of different growing stage between 2 populations of male sterile plants and male fertile plants. The plant height of different fertility plants come to the significance at 0.01 level in different stage through the whole growing period. The differences become more and more large with the development of plants, the maximum difference happens in adult stage. The increasing amount of different stage also shows significance at 0.01 level between two kinds of different fertility plants

Configuration management of plant modifications for nuclear power plants

International Nuclear Information System (INIS)

Ritsch, W.J.

1987-01-01

Due to the increasing complexity of nuclear power plant operation, regulatory pressure, and the large numbers of people required to operate and support the stations, the control of plant modifications at these plants needs to be expanded and improved. The aerospace and defense industries, as well as the owners or operators of large energy projects have established configuration management programs (CMPs) to control plant design changes. These programs are composed of well-defined functions for identifying, evaluating, recording, tracking, issuing, and documenting the established baseline conditions, as well as required changes to these baseline conditions. The purpose of this paper is to describe a recommended CMP for plant modifications consisting of a computerized data base installed on the utility's computer to provide a central storage of plant design and operations data necessary to control the following activities as they are affected by plant design changes: training; record management; operations; maintenance; health physics; planning/scheduling; procurement/inventory control; outage management (including modifications); and emergency response

Plant diversity surpasses plant functional groups and plant productivity as driver of soil biota in the long term.

Directory of Open Access Journals (Sweden)

Nico Eisenhauer

2011-01-01

Full Text Available One of the most significant consequences of contemporary global change is the rapid decline of biodiversity in many ecosystems. Knowledge of the consequences of biodiversity loss in terrestrial ecosystems is largely restricted to single ecosystem functions. Impacts of key plant functional groups on soil biota are considered to be more important than those of plant diversity; however, current knowledge mainly relies on short-term experiments.We studied changes in the impacts of plant diversity and presence of key functional groups on soil biota by investigating the performance of soil microorganisms and soil fauna two, four and six years after the establishment of model grasslands. The results indicate that temporal changes of plant community effects depend on the trophic affiliation of soil animals: plant diversity effects on decomposers only occurred after six years, changed little in herbivores, but occurred in predators after two years. The results suggest that plant diversity, in terms of species and functional group richness, is the most important plant community property affecting soil biota, exceeding the relevance of plant above- and belowground productivity and the presence of key plant functional groups, i.e. grasses and legumes, with the relevance of the latter decreasing in time.Plant diversity effects on biota are not only due to the presence of key plant functional groups or plant productivity highlighting the importance of diverse and high-quality plant derived resources, and supporting the validity of the singular hypothesis for soil biota. Our results demonstrate that in the long term plant diversity essentially drives the performance of soil biota questioning the paradigm that belowground communities are not affected by plant diversity and reinforcing the importance of biodiversity for ecosystem functioning.

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R. A.; Buendia Dominguez, E. H. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1997-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Use of efficient technologies in the lighting system for new constructions in hotels; Utilizacion de tecnologias eficientes en el sistema de iluminacion para nuevas construcciones en hoteles

Energy Technology Data Exchange (ETDEWEB)

Duran Ramirez, Ricardo [Fideicomiso para el Ahorro de la Energia Electrica (Mexico)

2005-01-15

The Fideicomiso para el Ahorro de la Energia Electrica (FIDE) jointly worked with two hotels in construction modifying the original projects of the lighting system to obtain a suitable selection of lamps and lighting control subsystems that would render a saving of 67.5% and 71.0% with respect to the lighting systems originally considered. The project also financed the investment with recovery periods between 1.6 and 2.6 years. It is presented the equivalence between the characteristics of the different types of feasible lamps. [Spanish] El Fideicomiso para el Ahorro de la Energia Electrica (FIDE) trabajo conjuntamente con dos hoteles en construccion modificando los proyectos originales del sistema de iluminacion para lograr una adecuada seleccion de lamparas y subsistemas de control de iluminacion que redituaron en un ahorro del 67.5 y 71.0 % respecto a los sistemas de iluminacion originalmente considerados, al tiempo que financio la inversion con periodos de recuperacion entre 1.6 y 2.6 anos. Se expone una equivalencia entre las caracteristicas de los distintos tipos de lamparas factibles.

Desulfuration technologies: past, present and future; Tecnologias de desulfuracion: pasado, presente y futuro

Energy Technology Data Exchange (ETDEWEB)

Rodas G, Arturo; Blass A, Georgina; Panama T, Luz A [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2003-07-01

The interest for obtaining harmony between the electric power generation and the environment has derived into the design of numerous technologies for the control of the main emissions of atmospheric polluting agents, being some of them the sulfur oxides (SOx) that, at certain levels of concentration in the atmosphere, cause health damages and to the surrounding ecosystem. The present article shows an overview of the technologies for the disposal of sulfurated compounds in thermoelectric power stations and their application trends in the future systems of electric power generation. [Spanish] El interes por lograr una armonia entre la generacion de energia electrica y el medio ambiente, ha derivado en el diseno de numerosas tecnologias para el control de las principales emisiones de contaminantes atmosfericos, siendo algunos de ellos los oxidos de azufre (SOx) que, a ciertos niveles de concentracion en la atmosfera, ocasionan danos a la salud y al ecosistema circundante. El presente articulo muestra un panorama general de las tecnologias de eliminacion de compuestos sulfurados en centrales termoelectricas y sus tendencias de aplicacion en los futuros sistemas de generacion de energia electrica.

Submersible pumps: Energetic efficiency norm; Bombas sumergibles: norma de eficiencia energetica

Energy Technology Data Exchange (ETDEWEB)

Acosta Torres, R A; Buendia Dominguez, E H [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1998-12-31

The Instituto de Investigaciones Electricas (IIE), supporting the Comision Nacional para el Ahorro de Energia (CONAE), has prepared a preliminary project of the norm of energy efficiency for submersible pumps. This document has complied with the necessary formalities for the emission of the norm. This paper presents the results of the analysis of the submersible pumps, the energy savings, as well as the economic evaluation that sustains the norm project, additionally pointing out the environmental impact that will bring along the implantation of the same. [Espanol] El Instituto de Investigaciones Electricas (IIE), apoyando a la Comision Nacional para el Ahorro de Energia (CONAE), ha elaborado el anteproyecto de norma de eficiencia energetica para bombas sumergibles. Dicho documento ha cumplido con los tramites necesarios para la emision de una norma. En el presente articulo se mencionan los resultados del analisis de las bombas sumergibles, los ahorros energeticos, asi como la evaluacion economica que sustenta el proyecto de norma, indicandose ademas el impacto ambiental que tendra la implantacion de la misma.

Industrial manufacturing of electric insulators; Fabricacion industrial de aisladores electricos

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Lucia [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

Porcelain is the insulating material more extensively used for electric insulators manufacturing, due to its dielectric properties; nevertheless, it presents fragility problems of manufacture and of resistance to the thermal shock, among others. For this reason studies are being conducted for the substitution of porcelain in the electric insulators manufacturing. In this area, the Instituto de Investigaciones Electricas developed an improved insulating formulation - the polymeric concrete- and an industrial prototype machine for the manufacture of high voltage electric insulators for outdoors use. [Espanol] La porcelana es el material aislante electrico mas utilizado en la elaboracion de aisladores electricos, debido a sus propiedades dielectricas; sin embargo, presenta problemas de fragilidad, de fabricacion y de baja resistencia al choque termico, entre otros. Es por ello que se realizan estudios para sustituir la porcelana en la fabricacion de aisladores electricos. En este campo, el Instituto de Investigaciones Electricas desarrollo una formulacion aislante mejorada -el concreto polimerico- y una maquina prototipo industrial para fabricar aisladores electricos de alto voltaje para uso en exteriores.

Risk analysis in the chemical industry; Analisis de riesgos en la industria quimica

Energy Technology Data Exchange (ETDEWEB)

Rea Soto, Rogelio; Sandoval Valenzuela, Salvador [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2000-07-01

The Instituto de Investigaciones Electricas has a group of risk analysis (GAR), specialized in the most advanced methodologies to apply them in diverse industries of the productive sector, such as the nuclear, the oil and the chemical industries. In this work the integrated methodology that the GAR uses to make risk analysis in the chemical and oil industries is described. These analyses have as an objective to make a meticulous evaluation of the system design, the operation practices, the maintenance and inspection policies and the emergency plans. [Spanish] El Instituto de Investigaciones Electricas cuenta con un grupo de analisis de riesgo (GAR), especializado en las metodologias mas avanzadas para aplicarlas en diversas industrias del sector productivo, como lo son la nuclear, la petrolera y la quimica. En este trabajo se describe la metodologia integrada que el GAR utiliza para realizar analisis de riesgos en las industrias quimica y petrolera. Estos analisis tienen como objetivo realizar una minuciosa evaluacion del diseno del sistema, las practicas de operacion, las politicas de mantenimiento e inspeccion y los planes de emergencia.

Perspectives on plant vulnerabilities ampersand other plant and containment improvements

International Nuclear Information System (INIS)

LaChance, J.; Kolaczkowski, A.; Kahn, J.

1996-01-01

The primary goal of the Individual Plant Examination (IPE) Program was for licensees to identify plant-unique vulnerabilities and actions to address these vulnerabilities. A review of these vulnerabilities and plant improvements that were identified in the IPEs was performed as part of the IPE Insights Program sponsored by the U.S. Nuclear Regulatory Commission (NRC). The purpose of this effort was to characterize the identified vulnerabilities and the impact of suggested plant improvements. No specific definition for open-quotes vulnerabilityclose quotes was provided in NRC Generic Letter 88-20 or in the subsequent NRC IPE submittal guidance documented in NUREG-1335. Thus licensees were left to use their own definitions. Only 20% of the plants explicitly stated that they had vulnerabilities. However, most licensees identified other plant improvements to address issues not explicitly classified as vulnerabilities, but pertaining to areas in which overall plant safety could potentially be increased. The various definitions of open-quotes vulnerabilityclose quotes used by the licensees, explicitly identified vulnerabilities, proposed plant improvements to address these vulnerabilities, and other plant improvements are summarized and discussed

Life management plants at nuclear power plants PWR

International Nuclear Information System (INIS)

Esteban, G.

2014-01-01

Since in 2009 the CSN published the Safety Instruction IS-22 (1) which established the regulatory framework the Spanish nuclear power plants must meet in regard to Life Management, most of Spanish nuclear plants began a process of convergence of their Life Management Plants to practice 10 CFR 54 (2), which is the current standard of Spanish nuclear industry for Ageing Management, either during the design lifetime of the plant, as well as for Long-Term Operation. This article describe how Life Management Plans are being implemented in Spanish PWR NPP. (Author)

Historical plant cost and annual production expenses for selected electric plants, 1982

International Nuclear Information System (INIS)

1984-01-01

This publication is a composite of the two prior publications, Hydroelectric Plant Construction Cost and Annual Production Expenses and Thermal-Electric Plant Construction Cost and Annual Production Expenses. Beginning in 1979, Thermal-Electric Plant Construction Cost and Annual Production Expenses contained information on both steam-electric and gas-turbine electric plant construction cost and annual production expenses. The summarized historical plant cost described under Historical Plant Cost in this report is the net cumulative-to-date actual outlays or expenditures for land, structures, and equipment to the utility. Historical plant cost is the initial investment in plant (cumulative to the date of initial commercial operation) plus the costs of all additions to the plant, less the value of retirements. Thus, historical plant cost includes expenditures made over several years, as modifications are made to the plant. Power Production Expenses is the reporting year's plant operation and maintenance expenses, including fuel expenses. These expenses do not include annual fixed charges on plant cost (capital costs) such as interest on debt, depreciation or amortization expenses, and taxes. Consequently, total production expenses and the derived unit costs are not the total cost of producing electric power at the various plants. This publication contains data on installed generating capacity, net generation, net capability, historical plant cost, production expenses, fuel consumption, physical and operating plant characteristics, and other relevant statistical information for selected plants

Aquatic Plant Control Research Program. Allelopathic Aquatic Plants for Aquatic Plant Management: A Feasibility Study

Science.gov (United States)

1989-10-01

1978. " Ecotoxicology of aquatic plant communi- ties," Principles of Ecotoxicology , SCOPE Report 12, Chapter 11, pp 239-255. [Heavy metals, Pollutants...Phragmites communis and Equisetum limosum were cultivated . They found plant-plant influences depend on soil type. Typha latifolia, S. A2 lacustris, and

Making Plant-Support Structures From Waste Plant Fiber

Science.gov (United States)

Morrow, Robert C.; < oscjmocl. < attjew K/; {ertzbprm. A,amda; Ej (e. Cjad); Hunt, John

2006-01-01

Environmentally benign, biodegradable structures for supporting growing plants can be made in a process based on recycling of such waste plant fiber materials as wheat straw or of such derivative materials as paper and cardboard. Examples of structures that can be made in this way include plant plugs, pots, planter-lining mats, plant fences, and root and shoot barriers. No chemical binders are used in the process. First, the plant material is chopped into smaller particles. The particles are leached with water or steam to remove material that can inhibit plant growth, yielding a fibrous slurry. If the desired structures are plugs or sheets, then the slurry is formed into the desired shapes in a pulp molding subprocess. If the desired structures are root and shoot barriers, pots, or fences, then the slurry is compression-molded to the desired shapes in a heated press. The processed materials in these structures have properties similar to those of commercial pressboard, but unlike pressboard, these materials contain no additives. These structures have been found to withstand one growth cycle, even when wet

Chapter 15. Plant pathology and managing wildland plant disease systems

Science.gov (United States)

David L. Nelson

2004-01-01

Obtaining specific, reliable knowledge on plant diseases is essential in wildland shrub resource management. However, plant disease is one of the most neglected areas of wildland resources experimental research. This section is a discussion of plant pathology and how to use it in managing plant disease systems.

Biogeographical diversity of plant associated microbes in arcto-alpine plants

NARCIS (Netherlands)

Kumar, Manoj Gopala Krishnan

2016-01-01

Terrestrial plants and microbes have co-evolved since the emergence of the former on Earth. Associations with microorganisms can be either beneficial or detrimental for plants. Microbes can be found in the soil surrounding the plant roots, but also in all plant tissues, including seeds. In

Generalized conventional and intelligent supervisory control system for combined cycle generation power plants; Sistema de control supervisorio generalizado convencional e inteligente para centrales de generacion de ciclo combinado

Energy Technology Data Exchange (ETDEWEB)

Martinez Morales, Miguel Angel

2004-12-15

The Mexican Electricity Utility (Comision Federal de Electricidad - CFE) growing program in Power Generation for the 2004 - 2008 period is based on Combined Cycle Power Plants (CCPP). In accordance with [CFE, 2000], the expected power generation capacity developed during such period will rise by the amount of 12876 MW, 10655 MW belonging to CCPP (82.75 %). With such important program for the increasing of Power Generation in Mexico, researches have to receive new technologies for CCPP, some of them not completely tested and immature, with the compromise to make then more efficient and reliable. Under such idea and looking to increase the automation level for CCPP with better control algorithms, the Supervisory Generalized Control (SGC) for CCPP was developed in this thesis, based on PID strategies and intelligent (fuzzy) control strategies. With the SGC is possible to get the best performance for the whole CCPP through the automatic starting, synchronizing and loading of the generating units (two gas turbines and one steam turbine) with a minimum participation of operators. To get the increased efficiency, the SGC generates the reference paths for both gas turbines (GT) first, and the steam turbine (ST). The SGC accelerates each unit with a minimum effort and vibrations getting the synchronizing speed in a minimum time and wasted energy. Then the SGC synchronize each unit taking minimum load quickly and loading up to the highest electric power value. All these can be done in an automated operation. The SGC employs two critical-process variable- control strategies, based on blade path temperature average (BPT Average) for Gas Turbines (GT) and the throttle steam pressure for the Steam Turbine (ST). The control algorithms designed take both units, the GT and the ST, picking up load to the highest process value avoiding the alarms activation and shutdown. This is possible only with such an automated control strategy. Test performed showed that with the SGC

Exotic plant species attack revegetation plants in post-coal mining areas

Science.gov (United States)

Yusuf, Muhammad; Arisoesilaningsih, Endang

2017-11-01

This study aimed to explore some invasive exotic plant species that have the potential to disrupt the growth of revegetation plants in post-coal mining areas. This research was conducted in a revegetation area of PT, Amanah Anugerah Adi Mulia (A3M) Kintap site, South Borneo. Direct observation was carried out on some revegetation areas by observing the growth of revegetation plants disturbed by exotic plant species and the spread of exotic plant species. Based on observation, several invasive exotic plant species were identified including Mikania cordata, Centrosema pubescence, Calopogonium mucunoides, Mimosa pudica, Ageratum conyzoides, and Chromolaena odorata. These five plant species grew wild in the revegetation area and showed ability to disrupt the growth of other plants. In some tree species, such as Acacia mangium, Paraserianthes falcataria, M. cordata could inhibit the growth and even kill the trees through covering the tree canopy. So, the trees could not receive optimum sun light for photosynthesis processes. M. cordata was also observed to have the most widespread distribution. Several exotic plant species such as C. mucunoides, M. pudica, and A. conyzoides were observed to have deep root systems compared with plant species used for revegetation. This growth characteristic allowed exotic plant species to win the competition for nutrient absorption with other plant species.

Electronic plants

Science.gov (United States)

Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

2015-01-01

The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

Stress tolerant plants

OpenAIRE

Rubio, Vicente; Iniesto Sánchez, Elisa; Irigoyen Miguel, María Luisa

2014-01-01

[EN] The invention relates to transgenic plants and methods for modulating abscisic acid (ABA) perception and signal transduction in plants. The plants find use in increasing yield in plants, particularly under abiotic stress.

The application of plant information system on third Qinshan nuclear power plant

International Nuclear Information System (INIS)

Liu Wangtian

2005-01-01

Plant overall control has been applied in Qinshan Nuclear Power Plant, which enhances the security of plant operation, but it is not enough to improve the technical administration level. In order to integrate the overall information and to improve the technical administration level more. Third Qinshan Nuclear Power Plant applies the plant information system. This thesis introduces the application of plant information system in Third Qinshan Nuclear Power Plant and the effect to the plant after the system is carried into execution, in addition, it does more analysis and exceptions for application of plant information system in the future. (authors)

Training in radiological protection; Capacitacion en proteccion radiologica

Energy Technology Data Exchange (ETDEWEB)

Medina G, E., E-mail: medina@ipen.gob.pe [Instituto Peruano de Energia Nuclear, Av. Canada 1470, San Borja, Lima 41 (Peru)

2014-08-15

In the Peru, according to the current regulations, people that work with ionizing radiations should have an authorization (individual license), which is granted by the Technical Office of the National Authority that is the technical body of the Instituto Peruano de Energia Nuclear (IPEN) manager of the control of ionizing radiations in the country. The individual license is obtained after the applicant fulfills the requested requirements, as having safety knowledge and radiological protection. Since its founding in 1972, the Centro Superior de Estudios Nucleares (CSEN) of the IPEN has carried out diverse training courses in order to that people can work in a safe way with ionizing radiations in medicine, industry and research, until the year 2013 have been organized 2231 courses that have allowed the training of 26213 people. The courses are organized according to the specific work that is carried out with radiations (medical radio-diagnostic, dental radiology, nuclear medicine, radiotherapy, industrial radiography, nuclear meters, logging while drilling, etc.). In their majority the courses are directed to people that will make use of radiations for first time, but refresher courses are also granted in the topic. The CSEN also carries out the Master degree programs highlighting the Second Professional Specialization in Radiological Protection carried out from the year 2004 with the support of the National University of Engineering. To the present has been carried out 2 programs and there is other being developed. In this work is shown the historical evolution of the radiological protection courses as well as the important thing that they are to work in a safe way in the country. (Author)

Private vs. Public Investment in the Mexican Utility Company: A Case Study

Science.gov (United States)

Dieck-Assad, Flory Anette

2016-01-01

How should the strategies and regulations of the Mexican laws be designed in order to trigger a country to go from a non-sustainable energy economy towards a sustainable energy economy? This paper proposes a classroom debate of the reformed Law of Public Electricity Service in Mexico (LSPEE, 1992: Ley del Servicio Publico de Energia Electrica),…

Birth and development of an electrical system: the Spanish case

International Nuclear Information System (INIS)

Mielgo, P.

1999-01-01

The year that elapsed from the time when the Law on the electrical Sector was passed provides the author with sufficient perspective to review the changes which took place in the sector's regulation, structure and functioning, and, in this framework, review the history and role of one of the fundamental pieces in its operation, Red Electrica de Spain

Linking plant nutritional status to plant-microbe interactions.

Science.gov (United States)

Carvalhais, Lilia C; Dennis, Paul G; Fan, Ben; Fedoseyenko, Dmitri; Kierul, Kinga; Becker, Anke; von Wiren, Nicolaus; Borriss, Rainer

2013-01-01

Plants have developed a wide-range of adaptations to overcome nutrient limitation, including changes to the quantity and composition of carbon-containing compounds released by roots. Root-associated bacteria are largely influenced by these compounds which can be perceived as signals or substrates. Here, we evaluate the effect of root exudates collected from maize plants grown under nitrogen (N), phosphate (P), iron (Fe) and potassium (K) deficiencies on the transcriptome of the plant growth promoting rhizobacterium (PGPR) Bacillus amyloliquefaciens FZB42. The largest shifts in gene expression patterns were observed in cells exposed to exudates from N-, followed by P-deficient plants. Exudates from N-deprived maize triggered a general stress response in FZB42 in the exponential growth phase, which was evidenced by the suppression of numerous genes involved in protein synthesis. Exudates from P-deficient plants induced bacterial genes involved in chemotaxis and motility whilst exudates released by Fe and K deficient plants did not cause dramatic changes in the bacterial transcriptome during exponential growth phase. Global transcriptional changes in bacteria elicited by nutrient deficient maize exudates were significantly correlated with concentrations of the amino acids aspartate, valine and glutamate in root exudates suggesting that transcriptional profiling of FZB42 associated with metabolomics of N, P, Fe and K-deficient maize root exudates is a powerful approach to better understand plant-microbe interactions under conditions of nutritional stress.

Plant diversity and plant identity influence Fusarium communities in soil.

Science.gov (United States)

LeBlanc, Nicholas; Kinkel, Linda; Kistler, H Corby

2017-01-01

Fusarium communities play important functional roles in soil and in plants as pathogens, endophytes, and saprotrophs. This study tests how rhizosphere Fusarium communities may vary with plant species, changes in the diversity of the surrounding plant community, and soil physiochemical characteristics. Fusarium communities in soil associated with the roots of two perennial prairie plant species maintained as monocultures or growing within polyculture plant communities were characterized using targeted metagenomics. Amplicon libraries targeting the RPB2 locus were generated from rhizosphere soil DNAs and sequenced using pyrosequencing. Sequences were clustered into operational taxonomic units (OTUs) and assigned a taxonomy using the Evolutionary Placement Algorithm. Fusarium community composition was differentiated between monoculture and polyculture plant communities, and by plant species in monoculture, but not in polyculture. Taxonomic classification of the Fusarium OTUs showed a predominance of F. tricinctum and F. oxysporum as well of the presence of a clade previously only found in the Southern Hemisphere. Total Fusarium richness was not affected by changes in plant community richness or correlated with soil physiochemical characteristics. However, OTU richness within two predominant phylogenetic lineages within the genus was positively or negatively correlated with soil physiochemical characteristics among samples within each lineage. This work shows that plant species, plant community richness, and soil physiochemical characteristics may all influence the composition and richness of Fusarium communities in soil.

Plant Density Effect in Different Planting Dates on Growth Indices, Yield and

Directory of Open Access Journals (Sweden)

F Azizi

2013-04-01

Full Text Available In order to determine the appropriate plant density in different planting dates for sweet corn cultivar KSC403su, an experiment was conducted using a randomized complete block design in split plot lay out with three replications at Seed and Plant Improvement Institute in Karaj in 2006. Three planting dates (22 May, 5 June and 22 June were assigned as main plots and three plant densities (65000, 75000 and 85000 plants per hectare were considered as sub plots. Effect of planting date on row/ear, 1000 kernels weight, biological yield and harvest index was significant at 1% probability level and it was significant at 5% probability level for kernels/ear row and grain yield. All traits decreased with postponement of planting date to 5 June except for row/ear, kernels/row and grain yield. More delay in planting from 22 May to 22 June caused that grain yield was decreased significantly about 32.5% (from 14.45 to 9.78 ton/ha. Effect of plant density was significant at 1% probability level for all the traits. All of the traits decreased significantly with increasing plant density except for biological yield. The highest grain yield was resulted from 65000 plants per hectare density (14.20 ton/ha. Interaction effect of planting date and plant density was significant at 5% probability level for biological yield and harvest index but it wasn’t significant for the other traits. Growth indices decreased with delay in planting date and increasing plant density. Only leaf area index increased in more plant densities. From the results of this experiment it might be resulted that appropriate planting date to produce the highest grain yield is 22 May to 5 June for sweet corn cultivar KSC403su and also the highest grain yield can obtain from 65000 plants per hectare density.

Medicinal Plants.

Science.gov (United States)

Phillipson, J. David

1997-01-01

Highlights the demand for medicinal plants as pharmaceuticals and the demand for health care treatments worldwide and the issues that arise from this. Discusses new drugs from plants, anticancer drugs, antiviral drugs, antimalarial drugs, herbal remedies, quality, safety, efficacy, and conservation of plants. Contains 30 references. (JRH)

Regulatory requirements for desalination plant coupled with nuclear reactor plant

International Nuclear Information System (INIS)

Yune, Young Gill; Kim, Woong Sik; Jo, Jong Chull; Kim, Hho Jung; Song, Jae Myung

2005-01-01

A small-to-medium sized reactor has been developed for multi-purposes such as seawater desalination, ship propulsion, and district heating since early 1990s in Korea. Now, the construction of its scaled-down research reactor, equipped with a seawater desalination plant, is planned to demonstrate the safety and performance of the design of the multi-purpose reactor. And the licensing application of the research reactor is expected in the near future. Therefore, a development of regulatory requirements/guides for a desalination plant coupled with a nuclear reactor plant is necessary for the preparation of the forthcoming licensing review of the research reactor. In this paper, the following contents are presented: the design of the desalination plant, domestic and foreign regulatory requirements relevant to desalination plants, and a draft of regulatory requirements/guides for a desalination plant coupled with a nuclear reactor plant

Plant simulator

International Nuclear Information System (INIS)

Fukumitsu, Hiroyuki

1998-01-01

A simulator of a reactor plant of the present invention comprises a plurality of distributed computers, an indication processing section and an operation section. The simulation calculation functions of various kinds of plant models in the plant are shared by the plurality of computers. The indication processing section controls collection of data of the plant simulated by the computers and instructions of an operator. The operation section is operated by the operator and the results of operation are transmitted to the indication processing section, to conduct operation trainings and display the results of the simulation. Each of the computers and the indication processing portion are connected with each other by a network having a memory for common use. Data such as the results of calculation of plant models and various kinds of parameters of the plant required commonly to the calculators and the indication processing section are stored in the common memory, and adapted to be used by way of the network. (N.H.)

[Distribution of HCB discharged from a chemical plant in plants].

Science.gov (United States)

Chen, Jing; Wang, Lin-Ling; Lu, Xiao-Hua; Yuan, Song-Hu; Liu, Xi-Xiang; Wang, Yue; Zhao, Qian; Mei, Ling-Fang

2009-04-15

The distribution characteristics of hexachlorobenzene (HCB) in plant and rhizosphere soil in contamination conduit, a nearby river and a cropland were studied and the impact factors were also discussed. The results are summarized as follows: the range of the HCB concentration in plant and rhizosphere soil in investigation area were respectively from 4.45 microg x kg(-1) to 1,189.89 microg x kg(-1) (dw) and from 27.93 microg x kg(-1) to 3,480.71 microg x kg(-1) (dw). Higher enrichment of HCB in woodplant than herbs due to higher fat concentration in woodplant in the contamination conduit and the rich concentrtion factor of woodplant and herbs were 0.41-2.55 and 0.01-1.34. The range of HCB concentrations in plants in nearby croplands was significantly wide (4.45-333.1 microg x kg(-1)) while HCB concentrations in different parts of plant were various, e.g. HCB concentrations in fruit, root and shoot of taro were 318.77 microg x kg(-1), 281.02 microg x kg(-1) and 10.94 microg x kg(-1). There was a remarkable positive relation between the concentrations of HCB in plant and fat concentration of plant while no relativity between the concentrations of HCB in plant and those in ground soils in the contamination conduit and cropland. The concentration levels of HCB in plant and rhizosphere soil in river were dramatically decreased with increasing distance from contaminated conduit. There was a remarkable positive relation between the concentrations of HCB in plant and those in ground soils but no relation between concentrations of HCB in plant and fat concentration of plant in river. The distribution characteristics of HCB in plants were influenced by contaminated levels, fat concentration and Partition-transfer model.

Plant extraction process

DEFF Research Database (Denmark)

2006-01-01

A method for producing a plant extract comprises incubating a plant material with an enzyme composition comprising a lipolytic enzyme.......A method for producing a plant extract comprises incubating a plant material with an enzyme composition comprising a lipolytic enzyme....

Integrating Studies on Plant-Pollinator and Plant-Herbivore Interactions

NARCIS (Netherlands)

Lucas-Barbosa, Dani

2016-01-01

Research on herbivore-induced plant defence and research on pollination ecology have had a long history of separation. Plant reproduction of most angiosperm species is mediated by pollinators, and the effects of herbivore-induced plant defences on pollinator behaviour have been largely neglected.

On-line acquisition of plant related and environmental parameters (plant monitoring) in gerbera: determining plant responses

NARCIS (Netherlands)

Baas, R.; Slootweg, G.

2004-01-01

For on-line plant monitoring equipment to be functional in commercial glasshouse horticulture, relations between sensor readings and plant responses on both the short (days) and long term (weeks) are required. For this reason, systems were installed to monitor rockwool grown gerbera plants on a

Plutonium Plant, Trombay

International Nuclear Information System (INIS)

Yadav, J.S.; Agarwal, K.

2017-01-01

The journey of Indian nuclear fuel reprocessing started with the commissioning of Plutonium Plant (PP) at Trombay on 22"n"d January, 1965 with an aim to reprocess the spent fuel from research reactor CIRUS. The basic process chosen for the plant was Plutonium Uranium Reduction EXtraction (PUREX) process. In seventies, the plant was subjected to major design modifications and replacement of hardware, which later met the additional demand from research reactor DHRUVA. The augmented plutonium plant has been operating since 1983. Experience gained from this plant was very much helpful to design future reprocessing plant in the country

[Intoxications with plants].

Science.gov (United States)

Kupper, Jacqueline; Reichert, Cornelia

2009-05-01

Ingestions of plants rarely lead to life-threatening intoxications. Highly toxic plants, which can cause death, are monkshood (Aconitum sp.), yew (Taxus sp.) and autumn crocus (Colchicum autumnale). Lethal ingestions of monkshood and yew are usually suicides, intoxications with autumn crocus are mostly accidental ingestions of the leaves mistaken for wild garlic (Allium ursinum). Severe intoxications can occur with plants of the nightshade family like deadly nightshade (Atropa belladonna), angel's trumpet (Datura suaveolens) or jimsonweed (Datura stramonium). These plants are ingested for their psychoactive effects. Ingestion of plant material by children most often only causes minor symptoms or no symptoms at all, as children usually do not eat great quantities of the plants. They are especially attracted by the colorful berries. There are plants with mostly cardiovascular effects like monkshood, yew and Digitalis sp. Some of the most dangerous plants belong to this group. Plants of the nightshade family cause an anticholinergic syndrome. With golden chain (Laburnum anagyroides), castor bean (Ricinus communis) and raw beans (Phaseolus vulgaris) we see severe gastrointestinal effects. Autumn crocus contains a cell toxin, colchicine, which leads to multiorgan failure. Different plants are irritative or even caustic to the skin. Treatment is usually symptomatic. Activated charcoal is administered within one hour after ingestion (1 g/kg). Endoscopic removal of plant material can be considered with ingestions of great quantities of highly toxic plants. Administration of repeated doses of charcoal (1-2 g/h every 2-4 hours) may be effective in case of oleander poisoning. There exist only two antidotes: Anti-digoxin Fab fragments can be used with cardenolide glycoside-containing plants (Digitalis sp., Oleander). Physostigmine is the antidote for severe anticholinergic symptoms of the CNS. Antibodies against colchicine, having been developed in France, are not available at

Plant life management and maintenance technologies for nuclear power plants

International Nuclear Information System (INIS)

Ikegami, Tsukasa; Aoki, Masataka; Shimura, Takao; Kaimori, Kimihiro; Koike, Masahiro

2001-01-01

Nuclear power generation occupying an important position for energy source in Japan and supplying about one third of total electric power usage is now required for further upgrading of its economics under regulation relaxation of electric power business. And, under execution retardation of its new planning plant, it becomes important to operate the already established plants for longer term and to secure their stability. Therefore, technical development in response to the plant life elongation is promoted under cooperation of the Ministry of Economics and Industries, electric power companies, literate, and plant manufacturers. Under such conditions, the Hitachi, Ltd. has progressed some technical developments on check inspection, repairs and maintenance for succession of the already established nuclear power plants for longer term under securing of their safety and reliability. And in future, by proposing the check inspection and maintenance program combined with these technologies, it is planned to exert promotion of maintenance program with minimum total cost from a viewpoint of its plant life. Here were described on technologies exerted in the Hitachi, Ltd. such as construction of plant maintenance program in response to plant life elongation agreeing with actual condition of each plant, yearly change mechanism grasping, life evaluation on instruments and materials necessary for maintenance, adequate check inspection, repairs and exchange, and so forth. (G.K.)

Plant life management

International Nuclear Information System (INIS)

Charbonneau, S.; Framatome, J.B.

1992-01-01

Plant life assessment and extension studies have been performed by numerous companies all over the world. Critical equipment has been identified as well as various degradation mechanisms involved in the plant aging process. Nowadays one has to think what to implement to improve the existing situation in the Nuclear Power Plant (NPP). FRAMATOME has undertaken this thought process in order to find the right answers and bring them to utilities facing either critical concern for plant life extension or the problem of management of power plant potential longevity. This is why we prepared a Plant Life Improvement Action Plan, comprising 10 (ten) major items described hereafter using examples of work performed by FRAMATOME for its utility customers desiring to manage the lives of their plants, both in France with EDF and abroad

Plant Research '75

Energy Technology Data Exchange (ETDEWEB)

1975-01-01

Research is reported on stomatal regulation of the gas exchanges between plant and environment; inhibitory effects in flower formation; plant growth and development through hormones; hormone action; development and nitrogen fixation in algae; primary cell wall glycoprotein ectensin; enzymic mechanisms and control of polysaccharide and glycoprotein synthesis; molecular studies of membrane studies; sensory transduction in plants; regulation of formation of protein complexes and enzymes in higher plant cell and mechanism of sulfur dioxide toxicity in plants. (PCS)

Speed control and generation of electric power of a gas turbine by means of fuzzy-logic; Control de velocidad y de generacion de potencia electrica de una turbina de gas mediante logica difusa

Energy Technology Data Exchange (ETDEWEB)

Bahamaca Fernandez, Luis Jonathan

2000-08-01

The development of a fuzzy-logic control algorithm is presented. It was developed for the speed and load control of a gas turbine. The speed/load controller of the gas turbine which were conventional Pi's were completely replaced by the fuzzy-logic controllers. The fuzzy controllers correspond to MISO systems that has as input the error an its rate of change and as an output the control signal for the fuel valve. The fuzzy controller provides an algorithm that can turn a strategy of linguistic control (based on knowledge of experts) into a strategy of automatic control. The fuzzy controllers were validated by the development of functional test in a simulation of a nonlinear mathematical gas-turbine model. The controllers were programmed in C language in PC. Simulation test for the speed regulation and load tracking were used for the controller validation. The fuzzy controller had a good performance because the minimized the signal error produced by the set of programmed system perturbations (due to control actions). Besides, they had a better reference tracking then PI controllers. Consequently, the proposed fuzzy controllers have a better performance than the conventional control system. [Spanish] En este trabajo de tesis se presenta el diseno, programacion y evaluacion de un algoritmo de control basado en logica difusa para el control de velocidad y generacion de potencia electrica de una turbina de gas. En el esquema de control velocidad/carga de la turbina de gas, se sustituyeron completamente los dos controladores convencionales del tipo PI por controladores difusos, teniendo asi un control digital directo. Los controladores difusos corresponden a sistemas MISO que utilizan como variables de entrada el error y la derivada del error, y como variable de salida la senal de control a la valvula de combustible. De esta forma, un controlador difuso provee un algoritmo que puede convertir una estrategia de control linguistico (basado en conocimiento de expertos

Plant air systems safety study: Portsmouth Gaseous Diffusion Plant

International Nuclear Information System (INIS)

1982-05-01

The Portsmouth Gaseous Diffusion Plant Air System facilities and operations are reviewed for potential safety problems not covered by standard industrial safety procedures. Information is presented under the following section headings: facility and process description (general); air plant equipment; air distribution system; safety systems; accident analysis; plant air system safety overview; and conclusion

PlantCV v2: Image analysis software for high-throughput plant phenotyping

Directory of Open Access Journals (Sweden)

Malia A. Gehan

2017-12-01

Full Text Available Systems for collecting image data in conjunction with computer vision techniques are a powerful tool for increasing the temporal resolution at which plant phenotypes can be measured non-destructively. Computational tools that are flexible and extendable are needed to address the diversity of plant phenotyping problems. We previously described the Plant Computer Vision (PlantCV software package, which is an image processing toolkit for plant phenotyping analysis. The goal of the PlantCV project is to develop a set of modular, reusable, and repurposable tools for plant image analysis that are open-source and community-developed. Here we present the details and rationale for major developments in the second major release of PlantCV. In addition to overall improvements in the organization of the PlantCV project, new functionality includes a set of new image processing and normalization tools, support for analyzing images that include multiple plants, leaf segmentation, landmark identification tools for morphometrics, and modules for machine learning.

Are atomic power plants saver than nuclear power plants

International Nuclear Information System (INIS)

Roeglin, H.C.

1977-01-01

It is rather impossible to establish nuclear power plants against the resistance of the population. To prevail over this resistance, a clarification of the citizens-initiatives motives which led to it will be necessary. This is to say: It is quite impossible for our population to understand what really heappens in nuclear power plants. They cannot identify themselves with nuclear power plants and thus feel very uncomfortable. As the total population feels the same way it is prepared for solidarity with the citizens-initiatives even if they believe in the necessity of nuclear power plants. Only an information-policy making transparent the social-psychological reasons of the population for being against nuclear power plants could be able to prevail over the resistance. More information about the technical procedures is not sufficient at all. (orig.) [de

Stem parasitic plant Cuscuta australis (dodder) transfers herbivory-induced signals among plants.

Science.gov (United States)

Hettenhausen, Christian; Li, Juan; Zhuang, Huifu; Sun, Huanhuan; Xu, Yuxing; Qi, Jinfeng; Zhang, Jingxiong; Lei, Yunting; Qin, Yan; Sun, Guiling; Wang, Lei; Baldwin, Ian T; Wu, Jianqiang

2017-08-08

Cuscuta spp. (i.e., dodders) are stem parasites that naturally graft to their host plants to extract water and nutrients; multiple adjacent hosts are often parasitized by one or more Cuscuta plants simultaneously, forming connected plant clusters. Metabolites, proteins, and mRNAs are known to be transferred from hosts to Cuscuta , and Cuscuta bridges even facilitate host-to-host virus movement. Whether Cuscuta bridges transmit ecologically meaningful signals remains unknown. Here we show that, when host plants are connected by Cuscuta bridges, systemic herbivory signals are transmitted from attacked plants to unattacked plants, as revealed by the large transcriptomic changes in the attacked local leaves, undamaged systemic leaves of the attacked plants, and leaves of unattacked but connected hosts. The interplant signaling is largely dependent on the jasmonic acid pathway of the damaged local plants, and can be found among conspecific or heterospecific hosts of different families. Importantly, herbivore attack of one host plant elevates defensive metabolites in the other systemic Cuscuta bridge-connected hosts, resulting in enhanced resistance against insects even in several consecutively Cuscuta -connected host plants over long distances (> 100 cm). By facilitating plant-to-plant signaling, Cuscuta provides an information-based means of countering the resource-based fitness costs to their hosts.

PlantPAN: Plant promoter analysis navigator, for identifying combinatorial cis-regulatory elements with distance constraint in plant gene groups

Directory of Open Access Journals (Sweden)

Huang Hsien-Da

2008-11-01

Full Text Available Abstract Background The elucidation of transcriptional regulation in plant genes is important area of research for plant scientists, following the mapping of various plant genomes, such as A. thaliana, O. sativa and Z. mays. A variety of bioinformatic servers or databases of plant promoters have been established, although most have been focused only on annotating transcription factor binding sites in a single gene and have neglected some important regulatory elements (tandem repeats and CpG/CpNpG islands in promoter regions. Additionally, the combinatorial interaction of transcription factors (TFs is important in regulating the gene group that is associated with the same expression pattern. Therefore, a tool for detecting the co-regulation of transcription factors in a group of gene promoters is required. Results This study develops a database-assisted system, PlantPAN (Plant Promoter Analysis Navigator, for recognizing combinatorial cis-regulatory elements with a distance constraint in sets of plant genes. The system collects the plant transcription factor binding profiles from PLACE, TRANSFAC (public release 7.0, AGRIS, and JASPER databases and allows users to input a group of gene IDs or promoter sequences, enabling the co-occurrence of combinatorial transcription factor binding sites (TFBSs within a defined distance (20 bp to 200 bp to be identified. Furthermore, the new resource enables other regulatory features in a plant promoter, such as CpG/CpNpG islands and tandem repeats, to be displayed. The regulatory elements in the conserved regions of the promoters across homologous genes are detected and presented. Conclusion In addition to providing a user-friendly input/output interface, PlantPAN has numerous advantages in the analysis of a plant promoter. Several case studies have established the effectiveness of PlantPAN. This novel analytical resource is now freely available at http://PlantPAN.mbc.nctu.edu.tw.

Los Alamos Nuclear Plant Analyzer: an interactive power-plant simulation program

International Nuclear Information System (INIS)

Steinke, R.; Booker, C.; Giguere, P.; Liles, D.R.; Mahaffy, J.H.; Turner, M.R.

1984-01-01

The Nuclear Plant Analyzer (NPA) is a computer-software interface for executing the TRAC or RELAP5 power-plant systems codes. The NPA is designed to use advanced supercomputers, long-distance data communications, and a remote workstation terminal with interactive computer graphics to analyze power-plant thermal-hydraulic behavior. The NPA interface simplifies the running of these codes through automated procedures and dialog interaction. User understanding of simulated-plant behavior is enhanced through graphics displays of calculational results. These results are displayed concurrently with the calculation. The user has the capability to override the plant's modeled control system with hardware-adjustment commands. This gives the NPA the utility of a simulator, and at the same time, the accuracy of an advanced, best-estimate, power-plant systems code for plant operation and safety analysis

Nuclear Plant Analyzer: an interactive TRAC/RELAP Power-Plant Simulation Program

International Nuclear Information System (INIS)

Steinke, R.; Booker, C.; Giguere, P.; Liles, D.; Mahaffy, J.; Turner, M.; Wiley, R.

1984-01-01

The Nuclear Plant Analyzer (NPA) is a computer-software interface for executing the TRAC or RELAP5 power-plant systems codes. The NPA is designed to use advanced supercomputers, long-distance data communications, and a remote workstation terminal with interactive computer graphics to analyze power-plant thermal-hydraulic behavior. The NPA interface simplifies the running of these codes through automated procedures and dialog interaction. User understanding of simulated-plant behavior is enhanced through graphics displays of calculational results. These results are displayed concurrently with the calculation. The user has the capability to override the plant's modeled control system with hardware adjustment commands. This gives the NPA the utility of a simulator, and at the same time, the accuracy of an advanced, best-estimate, power-plant systems code for plant operation and safety analysis

Gas turbine cogeneration plant for textile dyeing plant in Italy

International Nuclear Information System (INIS)

Tonetti, P.E.

1991-01-01

This paper reports the information (i.e., notes on specific plant component weaknesses and defects, e.g., exchanger tube fouling, improper positioning of temperature probes, incorrect choice of flow valves, etc., and relative remedial actions) gained during a one year cogeneration plant debugging campaign at the Colorama textile dyeing plant in Italy. The cogeneration plant consists of a Solar Saturn MK III gas turbine (1,080 kw at terminals, 500 degrees C exhaust gas temperature); a double (steam and hot water) circuit waste heat boiler contemporaneously producing, with 100 degrees C supply water, 4 tonnes/h steam at 5 bars and 9 cubic meters/h of 20 to 80 degrees C hot water; and a 1,470 kVA generator operating at 3 kV connected by a 3kV/15kV transformer to the national grid. The plant is protected against fire by independent halon fire protection systems, one for the gas turbine plant, the other, for the control room. A modem connects the plant control and monitoring system with the firm which supplied the equipment. The plant operator cites an urgent national requirement for trained cogeneration equipment technical consultants and designers in order to better promote the use of innovative cogeneration technology by Italian industry

Plant-phytopathogen interactions: bacterial responses to environmental and plant stimuli.

Science.gov (United States)

Leonard, Simon; Hommais, Florence; Nasser, William; Reverchon, Sylvie

2017-05-01

Plant pathogenic bacteria attack numerous agricultural crops, causing devastating effects on plant productivity and yield. They survive in diverse environments, both in plants, as pathogens, and also outside their hosts as saprophytes. Hence, they are confronted with numerous changing environmental parameters. During infection, plant pathogens have to deal with stressful conditions, such as acidic, oxidative and osmotic stresses; anaerobiosis; plant defenses; and contact with antimicrobial compounds. These adverse conditions can reduce bacterial survival and compromise disease initiation and propagation. Successful bacterial plant pathogens must detect potential hosts and also coordinate their possibly conflicting programs for survival and virulence. Consequently, these bacteria have a strong and finely tuned capacity for sensing and responding to environmental and plant stimuli. This review summarizes our current knowledge of the signals and genetic circuits that affect survival and virulence factor expression in three important and well-studied plant pathogenic bacteria with wide host ranges and the capacity for long-term environmental survival. These are: Ralstonia solanacerarum, a vascular pathogen that causes wilt disease; Agrobacterium tumefaciens, a biotrophic tumorigenic pathogen responsible for crown gall disease and Dickeya, a brute force apoplastic pathogen responsible for soft-rot disease. © 2016 Society for Applied Microbiology and John Wiley & Sons Ltd.

Plant diagnosis device

International Nuclear Information System (INIS)

Tozuka, Shin-ichi.

1996-01-01

Standard data approximately defined are inputted as 1:1 functional data between at least two or more plant data and each of plant data are inputted. Diagnosis data corresponding to each of process data are formed based on the functional data. Limit value data to be a threshold value which determines whether the diagnosis data are in a predetermined state or not are formed. The diagnosis data and the limit value data are displayed in a recognizable state. If diagnosis data of a plurality of plants are displayed simultaneously, all of the plant data are substantially the same value with one standard datum if the plant is in a normal state. When abnormality should occur in the plant, the difference between the diagnosis data and the standard data is remarkable, and the difference between the diagnosis data of other normal plant data and the standard data are also made remarkably, accordingly, the display of a plurality of diagnosis data is scattered thereby capable of diagnosing the abnormality of the plant. (N.H.)

Interannual variability of plant phenology in tussock tundra: modelling interactions of plant productivity, plant phenology, snowmelt and soil thaw

NARCIS (Netherlands)

Wijk, van M.T.; Williams, M.; Laundre, J.A.; Shaver, G.R.

2003-01-01

We present a linked model of plant productivity, plant phenology, snowmelt and soil thaw in order to estimate interannual variability of arctic plant phenology and its effects on plant productivity. The model is tested using 8 years of soil temperature data, and three years of bud break data of

Methylobacterium-plant interaction genes regulated by plant exudate and quorum sensing molecules

Directory of Open Access Journals (Sweden)

Manuella Nóbrega Dourado

2013-12-01

Full Text Available Bacteria from the genus Methylobacterium interact symbiotically (endophytically and epiphytically with different plant species. These interactions can promote plant growth or induce systemic resistance, increasing plant fitness. The plant colonization is guided by molecular communication between bacteria-bacteria and bacteria-plants, where the bacteria recognize specific exuded compounds by other bacteria (e.g. homoserine molecules and/or by the plant roots (e.g. flavonoids, ethanol and methanol, respectively. In this context, the aim of this study was to evaluate the effect of quorum sensing molecules (N-acyl-homoserine lactones and plant exudates (including ethanol in the expression of a series of bacterial genes involved in Methylobacterium-plant interaction. The selected genes are related to bacterial metabolism (mxaF, adaptation to stressful environment (crtI, phoU and sss, to interactions with plant metabolism compounds (acdS and pathogenicity (patatin and phoU. Under in vitro conditions, our results showed the differential expression of some important genes related to metabolism, stress and pathogenesis, thereby AHL molecules up-regulate all tested genes, except phoU, while plant exudates induce only mxaF gene expression. In the presence of plant exudates there is a lower bacterial density (due the endophytic and epiphytic colonization, which produce less AHL, leading to down regulation of genes when compared to the control. Therefore, bacterial density, more than plant exudate, influences the expression of genes related to plant-bacteria interaction.

Plant dynamics studies towards design of plant protection system for PFBR

Energy Technology Data Exchange (ETDEWEB)

Natesan, K., E-mail: natesan@igcar.gov.in [Nuclear and Safety Engineering Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India); Kasinathan, N.; Velusamy, K.; Selvaraj, P.; Chellapandi, P. [Nuclear and Safety Engineering Group, Indira Gandhi Centre for Atomic Research, Kalpakkam 603 102 (India)

2012-09-15

Highlights: Black-Right-Pointing-Pointer Analysis of various design basis events in a fast breeder reactor towards design of plant protection system. Black-Right-Pointing-Pointer Plant dynamic modeling of a sodium cooled fast breeder reactor. Black-Right-Pointing-Pointer Selection of optimum set of plant parameters for considering best plant availability. - Abstract: Prototype fast breeder reactor (PFBR) is a 500 MWe (1250 MWt) liquid sodium cooled pool type reactor currently under construction in India. For a safe and efficient operation of the plant, it is necessary that the reactor is protected from all the transients that may occur in the plant. In order to accomplish this, adequate number of SCRAM parameters is required in the plant protection system with reliable instrumentation. For identifying the SCRAM parameters, the neutronic and thermal hydraulic responses of the plant for various possible events need to be established. Towards this, a one dimensional plant dynamics code DYANA-P has been developed with thermal hydraulic models for reactor core, hot and cold pools, intermediate heat exchangers, pipelines, steam generator, primary sodium circuits and secondary sodium circuits. The code also incorporates neutron kinetics and reactivity feedback models. By a comprehensive plant dynamics study an optimum list of SCRAM parameters and the maximum permissible response time for various instruments used for deriving them have been arrived at.

Employing modern power plant simulators in nuclear power plants

International Nuclear Information System (INIS)

Niedorf, V.; Storm, J.

2005-01-01

At the present state of the art, modern power plant simulators are characterized by new qualitative features, thus enabling operators to use them far beyond the traditional field of training. In its first part, this contribution presents an overview of the requirements to be met by simulators for multivalent uses. In part two, a survey of the uses and perspectives of simulation technology in power plants is presented on the basis of experience accumulated by Rheinmetall Defence Electronics (RDE).Modern simulators are shown to have applications by far exceeding traditional training areas. Modular client - sever systems on standard computers allow inexpensive uses to be designed at several levels, thus minimizing maintenance cost. Complex development and running time environments, like the SEMS developed by RDE, have made power plant simulators the workhorses of power plant engineers in all power plant areas. (orig.)

A new model for commercially sustainable renewable energy-based rural electrification in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Walt, Robb [Integrated Power Corporation-Indonesia, (United states)

1995-12-31

Rapidly increasing demands and requirements for access to electricity throughout the remote areas of Indonesia coupled with annual subsidies in excess of $500 million of dollars for rural electrification have forced the Government of Indonesia to search for alternatives to the conventional utility model for rural electrification. In 1992-1993 a study was conducted in collaboration with the Government of Indonesia`s Agency Application and Assessment of Technology (BPPT) and the national power utility, PLN to support the search for sustainable solutions for electrification of remote communities. This study produced a New commercial model for electrification of off-grid rural communities in Indonesia with utility quality electricity services. This new model is characterized by the use of new technologies for power generation, distribution, and sales of electricity. Key to the success of the new model are renewable energy-based hybrid power plants and the use of flexible, on-demand electricity dispensing meters. Estimated fees for electricity service are based on the current amounts now being paid by rural households for kerosene, candles and battery services at different income levels. The study showed that most rural households are willing and able to pay additional amounts for reliable, utility grade electricity for valuable services, such as better lighting, TV entertainment and for productive (economic) uses during daytime hours. A financial assessment was conducted for investments in hybrid power systems for off-grid communities with revenues generated on the basis of market fees, and collected through new technology for electricity purchase and prepayment on a commodity basis. The assessment demonstrates that this approach would provide superior electricity services on a full-time basis, with little or no subsidy required during the three- to five-year commercialization phase, and with profitability as an achievable goal in the full commercial phase. [Espanol

A new model for commercially sustainable renewable energy-based rural electrification in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Walt, Robb [Integrated Power Corporation-Indonesia, (United states)

1996-12-31

Rapidly increasing demands and requirements for access to electricity throughout the remote areas of Indonesia coupled with annual subsidies in excess of $500 million of dollars for rural electrification have forced the Government of Indonesia to search for alternatives to the conventional utility model for rural electrification. In 1992-1993 a study was conducted in collaboration with the Government of Indonesia`s Agency Application and Assessment of Technology (BPPT) and the national power utility, PLN to support the search for sustainable solutions for electrification of remote communities. This study produced a New commercial model for electrification of off-grid rural communities in Indonesia with utility quality electricity services. This new model is characterized by the use of new technologies for power generation, distribution, and sales of electricity. Key to the success of the new model are renewable energy-based hybrid power plants and the use of flexible, on-demand electricity dispensing meters. Estimated fees for electricity service are based on the current amounts now being paid by rural households for kerosene, candles and battery services at different income levels. The study showed that most rural households are willing and able to pay additional amounts for reliable, utility grade electricity for valuable services, such as better lighting, TV entertainment and for productive (economic) uses during daytime hours. A financial assessment was conducted for investments in hybrid power systems for off-grid communities with revenues generated on the basis of market fees, and collected through new technology for electricity purchase and prepayment on a commodity basis. The assessment demonstrates that this approach would provide superior electricity services on a full-time basis, with little or no subsidy required during the three- to five-year commercialization phase, and with profitability as an achievable goal in the full commercial phase. [Espanol

Proceedings of the 7 Annual conference of the Mexican association for the energy economy. The energy sector in Mexico: challenges and solutions. [Selected papers]; 7. Conferencia anual de la asociacion mexicana para la economia energetica. El sector energia en Mexico: retos y soluciones

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-07-01

The Mexican Association for the Energy Economy (AMEE) had its VII annual conference, The energy sector in Mexico: challenges and solutions, in October, 2004. Some of the expounded topics are: technical and environmental aspects of the combined cycle power stations; analysis of the generation of electric power across biogas from sanitary landfills in Mexico; cogeneration in large power plants; methodologies for the calculation of relative efficiency: description and application of natural gas distributors in Latin American and others. [Spanish] La Asociacion Mexicana para la Economia Energetica A. C. (AMEE), llevo acabo su VII conferencia anual El sector energia en Mexico: retos y soluciones, en octubre del 2004. Algunos de los temas tratados son: Aspectos tecnicos y medioambientales de las centrales de ciclo combinado con gasificacion integrada; Analisis de la generacion de energia electrica a traves de biogas procedente de rellenos sanitarios en Mexico; Cogeneracion en grandes centrales de proceso; Metodologias para el calculo de eficiencia relativa: descripcion y aplicacion para distribuidores de gas natural en Latinoamerica y otros.

The spanish electric system operation. The contribution of nuclear generation

International Nuclear Information System (INIS)

Duvison, M. R.; Torre, M. de la

2009-01-01

Operation of an electric system encloses the collection of activities which extend from affective generation dispatch to issuing instruction for network manoeuvring along with international exchange scheduling. Based on the market mechanisms that apply to energy transactions, these tasks guarantee the security of supply end consumers, which is the final goal of the System Operators actions. In Spain this function is executed by Red Electrica de Espana (REE) since 1985, after being constituted as the first Transmission and System Operator (TSO) in the world. Additionally the variations to Law 54/1997 introduced by law 17/2007 also assign REE the function of sole transmission owner in the Spanish electric system. In order to achieve the aforementioned goal, nuclear energy plays in Spain a fundamental role in electric generation thanks to its high availability rate, the predictability of its fuel recharges, its high operational reliability, its geographical location, the stability of its costs and the security of supply given by the possibility of on-site fuel storage in the power plant. (Author)

Assessment of environmental issues using SUPER-OLADE/BID for comparing alternative electricity system expansion strategies. A case study for Colombia

Energy Technology Data Exchange (ETDEWEB)

Campo, R [Bogota (Colombia); Angel, E [Interconexion Electrica S.A., Medellin (Colombia); Gomez, D; Leon, O L [Empresa de Energia de Bogota, Bogota (Colombia)

1996-06-01

SUPER is a modular package for electricity generation expansion studies. It includes an environmental impacts module (EIM), originally developed by Interconexion Electrica S.A., the operator of the Colombian Power Pool, and adapted for use by utilities with a large hydro component. The paper describes the EIM and illustrates its application to a recent study. (author). 2 figs, 2 tabs.

Plant-plant interactions in the restoration of Mediterranean drylands

Science.gov (United States)

Valdecantos, Alejandro; Fuentes, David; Smanis, Athanasios

2014-05-01

Plant-plant interactions are complex and dependent of both local abiotic features of the ecosystem and biotic relationships with other plants and animals. The net result of these interactions may be positive, negative or neutral resulting in facilitation, competition or neutralism, respectively (role of phylogeny). It has been proposed that competition is stronger between those individuals that share functional traits than between unrelated ones. The relative interaction effect of one plant on a neighbour may change in relation to resource availability - especially water in drylands. In addition, plants develop above and belowground biomass with time increasing the level and, eventually, changing the intensity and/or the direction of the interaction. In the framework of the restoration of degraded drylands, many studies have focused on the positive (nurse) effects of adult trees, shrubs and even grasses on artificially planted seedlings by improving the microclimate or providing protection against herbivores, but little is known about the interactions between seedlings of different life traits planted together under natural field conditions. In 2010 we established planting plots in two contrasted sites under semiarid Mediterranean climate and introduced one year old seedlings in different combinations of three species, two shrubs (Olea europaea and Pistacia lentiscus) and one grass (Stipa tenacissima). Half of the planting holes in each site were implemented with low-cost ecotechnological inputs to increase water availability by forcing runoff production and promoting deep infiltration (small plastic fabric + dry well). This resulted in four levels of abiotic stress. Biotic interactions were assessed by monitoring seedling survival and growth for three years after planting. The Relative Interaction Index (RII) of S. tenacissima on O. europaea was almost flat and close to 0 along the stress gradient since the beginning of the study suggesting limited interaction

Plant Phenotype Characterization System

Energy Technology Data Exchange (ETDEWEB)

Daniel W McDonald; Ronald B Michaels

2005-09-09

This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

PlantNATsDB: a comprehensive database of plant natural antisense transcripts.

Science.gov (United States)

Chen, Dijun; Yuan, Chunhui; Zhang, Jian; Zhang, Zhao; Bai, Lin; Meng, Yijun; Chen, Ling-Ling; Chen, Ming

2012-01-01

Natural antisense transcripts (NATs), as one type of regulatory RNAs, occur prevalently in plant genomes and play significant roles in physiological and pathological processes. Although their important biological functions have been reported widely, a comprehensive database is lacking up to now. Consequently, we constructed a plant NAT database (PlantNATsDB) involving approximately 2 million NAT pairs in 69 plant species. GO annotation and high-throughput small RNA sequencing data currently available were integrated to investigate the biological function of NATs. PlantNATsDB provides various user-friendly web interfaces to facilitate the presentation of NATs and an integrated, graphical network browser to display the complex networks formed by different NATs. Moreover, a 'Gene Set Analysis' module based on GO annotation was designed to dig out the statistical significantly overrepresented GO categories from the specific NAT network. PlantNATsDB is currently the most comprehensive resource of NATs in the plant kingdom, which can serve as a reference database to investigate the regulatory function of NATs. The PlantNATsDB is freely available at http://bis.zju.edu.cn/pnatdb/.

Automation of dosimeters calibration for radiotherapy in secondary dosimetric calibration laboratory of the CPHR

International Nuclear Information System (INIS)

Acosta, Andy L. Romero; Lores, Stefan Gutierrez

2013-01-01

This paper presents the design and implementation of an automated system for measurements in the calibration of reference radiation dosimeters. It was made a software application that performs the acquisition of the measured values of electric charge, calculated calibration coefficient and automates the calibration certificate issuance. These values are stored in a log file on a PC. The use of the application improves control over the calibration process, helps to humanize the work and reduces personnel exposure. The tool developed has been applied to the calibration of dosimeters radiation patterns in the LSCD of the Centro de Proteccion e Higiene de las Radiaciones, Cuba

Automation of dosimeters calibration for radiotherapy in secondary dosimetric calibration laboratory of the CPHR; Automatizacion de la calibracion de dosimetros de radioterapia en el laboratorio secundario de calibracion dosimetrica del CPHR

Energy Technology Data Exchange (ETDEWEB)

Acosta, Andy L. Romero; Lores, Stefan Gutierrez, E-mail: c19btm@frcuba.co.cu [Centro de Proteccion e Higiene de las Radiaciones (CPHR), La Habana (Cuba)

2013-11-01

This paper presents the design and implementation of an automated system for measurements in the calibration of reference radiation dosimeters. It was made a software application that performs the acquisition of the measured values of electric charge, calculated calibration coefficient and automates the calibration certificate issuance. These values are stored in a log file on a PC. The use of the application improves control over the calibration process, helps to humanize the work and reduces personnel exposure. The tool developed has been applied to the calibration of dosimeters radiation patterns in the LSCD of the Centro de Proteccion e Higiene de las Radiaciones, Cuba.

El blindaje de una PC

Directory of Open Access Journals (Sweden)

Revista Chasqui

2015-01-01

Full Text Available La navegación en Internet y la consiguiente conexión a una red expone a una computadora a un sinfín de riesgos y peligros. Una PC que no sea utilizada para navegar en Internet o que no esté conectada a una red puede,incluso, ser también afectada por virus, por la utilización de disquetes contaminados que la contaminen con un virus. Para enfrentar esos problemas, la industria informática ha previsto una serie de protecciones y recaudos, de cuyo uso y utilización deben estar plenamente informados los usuarios de una PC.

Effects of plant diversity on the concentration of secondary plant metabolites and the density of arthropods on focal plants in the field

NARCIS (Netherlands)

Kostenko, O.; Mulder, Patrick P. J.; Courbois, Matthijs; Bezemer, T. Martijn

2017-01-01

1.The diversity of the surrounding plant community can directly affect the abundance of insects on a focal plant as well as the size and quality of that focal plant. However, to what extent the effects of plant diversity on the arthropod community on a focal plant are mediated by host plant quality

Plant synthetic biology.

Science.gov (United States)

Liu, Wusheng; Stewart, C Neal

2015-05-01

Plant synthetic biology is an emerging field that combines engineering principles with plant biology toward the design and production of new devices. This emerging field should play an important role in future agriculture for traditional crop improvement, but also in enabling novel bioproduction in plants. In this review we discuss the design cycles of synthetic biology as well as key engineering principles, genetic parts, and computational tools that can be utilized in plant synthetic biology. Some pioneering examples are offered as a demonstration of how synthetic biology can be used to modify plants for specific purposes. These include synthetic sensors, synthetic metabolic pathways, and synthetic genomes. We also speculate about the future of synthetic biology of plants. Copyright © 2015 Elsevier Ltd. All rights reserved.

Plant neurobiology and green plant intelligence : science, metaphors and nonsense

NARCIS (Netherlands)

Struik, P.C.; Yin, X.; Meinke, H.B.

2008-01-01

This paper analyses the recent debates on the emerging science of plant neurobiology, which claims that the individual green plant should be considered as an intelligent organism. Plant neurobiology tries to use elements from animal physiology as elegant metaphors to trigger the imagination in

Improvement of plant reliability in PT. Badak LNG plant

International Nuclear Information System (INIS)

Achmad, S.; Somantri, A.

1997-01-01

PT. Badak's LNG sales commitment has been steadily increasing, therefore, there has been more emphasis to improve and maintain the LNG plant reliability. From plant operation historical records, Badak LNG plant experienced a high number of LNG process train trips and down time for 1977 through 1988. The highest annual number of LNG plant trips (50 times) occurred in 1983 and the longest LNG process train down time (1259 train-hours) occurred in 1988. Since 1989, PT. Badak has been able to reduce the number of LNG process train trips and down time significantly. In 1994 the number of LNG process train trips and was 18 times and the longest LNG process train down time was 377 train-hours. This plant reliability improvement was achieved by implementing plant reliability improvement programs beginning with the design of the new facilities and continuing with the maintenance and modification of the existing facilities. To improve reliability of the existing facilities, PT. Badak has been implementing comprehensive maintenance programs, to reduce the frequency and down time of the plant, such as Preventive and Predictive Maintenance as well as procurement material improvement since PT. Badak location is in a remote area. By implementing the comprehensive reliability maintenance, PT. Badak has been able to reduce the LNG process train trips to 18 and down time to 337 train hours in 1994 with the subsequent maintenance cost reduction. The average PT. Badak plant availability from 1985 to 1995 is 94.59%. New facilities were designed according to the established PT. Badak design philosophy, master plan and specification. Design of new facilities was modified to avoid certain problems from past experience. (au)

Ecology and Genomic Insights into Plant-Pathogenic and Plant-Nonpathogenic Endophytes.

Science.gov (United States)

Brader, Günter; Compant, Stéphane; Vescio, Kathryn; Mitter, Birgit; Trognitz, Friederike; Ma, Li-Jun; Sessitsch, Angela

2017-08-04

Plants are colonized on their surfaces and in the rhizosphere and phyllosphere by a multitude of different microorganisms and are inhabited internally by endophytes. Most endophytes act as commensals without any known effect on their plant host, but multiple bacteria and fungi establish a mutualistic relationship with plants, and some act as pathogens. The outcome of these plant-microbe interactions depends on biotic and abiotic environmental factors and on the genotype of the host and the interacting microorganism. In addition, endophytic microbiota and the manifold interactions between members, including pathogens, have a profound influence on the function of the system plant and the development of pathobiomes. In this review, we elaborate on the differences and similarities between nonpathogenic and pathogenic endophytes in terms of host plant response, colonization strategy, and genome content. We furthermore discuss environmental effects and biotic interactions within plant microbiota that influence pathogenesis and the pathobiome.

MIPS PlantsDB: a database framework for comparative plant genome research.

Science.gov (United States)

Nussbaumer, Thomas; Martis, Mihaela M; Roessner, Stephan K; Pfeifer, Matthias; Bader, Kai C; Sharma, Sapna; Gundlach, Heidrun; Spannagl, Manuel

2013-01-01

The rapidly increasing amount of plant genome (sequence) data enables powerful comparative analyses and integrative approaches and also requires structured and comprehensive information resources. Databases are needed for both model and crop plant organisms and both intuitive search/browse views and comparative genomics tools should communicate the data to researchers and help them interpret it. MIPS PlantsDB (http://mips.helmholtz-muenchen.de/plant/genomes.jsp) was initially described in NAR in 2007 [Spannagl,M., Noubibou,O., Haase,D., Yang,L., Gundlach,H., Hindemitt, T., Klee,K., Haberer,G., Schoof,H. and Mayer,K.F. (2007) MIPSPlantsDB-plant database resource for integrative and comparative plant genome research. Nucleic Acids Res., 35, D834-D840] and was set up from the start to provide data and information resources for individual plant species as well as a framework for integrative and comparative plant genome research. PlantsDB comprises database instances for tomato, Medicago, Arabidopsis, Brachypodium, Sorghum, maize, rice, barley and wheat. Building up on that, state-of-the-art comparative genomics tools such as CrowsNest are integrated to visualize and investigate syntenic relationships between monocot genomes. Results from novel genome analysis strategies targeting the complex and repetitive genomes of triticeae species (wheat and barley) are provided and cross-linked with model species. The MIPS Repeat Element Database (mips-REdat) and Catalog (mips-REcat) as well as tight connections to other databases, e.g. via web services, are further important components of PlantsDB.

Morphological Plant Modeling: Unleashing Geometric and Topological Potential within the Plant Sciences

Science.gov (United States)

Bucksch, Alexander; Atta-Boateng, Acheampong; Azihou, Akomian F.; Battogtokh, Dorjsuren; Baumgartner, Aly; Binder, Brad M.; Braybrook, Siobhan A.; Chang, Cynthia; Coneva, Viktoirya; DeWitt, Thomas J.; Fletcher, Alexander G.; Gehan, Malia A.; Diaz-Martinez, Diego Hernan; Hong, Lilan; Iyer-Pascuzzi, Anjali S.; Klein, Laura L.; Leiboff, Samuel; Li, Mao; Lynch, Jonathan P.; Maizel, Alexis; Maloof, Julin N.; Markelz, R. J. Cody; Martinez, Ciera C.; Miller, Laura A.; Mio, Washington; Palubicki, Wojtek; Poorter, Hendrik; Pradal, Christophe; Price, Charles A.; Puttonen, Eetu; Reese, John B.; Rellán-Álvarez, Rubén; Spalding, Edgar P.; Sparks, Erin E.; Topp, Christopher N.; Williams, Joseph H.; Chitwood, Daniel H.

2017-01-01

The geometries and topologies of leaves, flowers, roots, shoots, and their arrangements have fascinated plant biologists and mathematicians alike. As such, plant morphology is inherently mathematical in that it describes plant form and architecture with geometrical and topological techniques. Gaining an understanding of how to modify plant morphology, through molecular biology and breeding, aided by a mathematical perspective, is critical to improving agriculture, and the monitoring of ecosystems is vital to modeling a future with fewer natural resources. In this white paper, we begin with an overview in quantifying the form of plants and mathematical models of patterning in plants. We then explore the fundamental challenges that remain unanswered concerning plant morphology, from the barriers preventing the prediction of phenotype from genotype to modeling the movement of leaves in air streams. We end with a discussion concerning the education of plant morphology synthesizing biological and mathematical approaches and ways to facilitate research advances through outreach, cross-disciplinary training, and open science. Unleashing the potential of geometric and topological approaches in the plant sciences promises to transform our understanding of both plants and mathematics. PMID:28659934

Morphological Plant Modeling: Unleashing Geometric and Topological Potential within the Plant Sciences

Directory of Open Access Journals (Sweden)

Alexander Bucksch

2017-06-01

Full Text Available The geometries and topologies of leaves, flowers, roots, shoots, and their arrangements have fascinated plant biologists and mathematicians alike. As such, plant morphology is inherently mathematical in that it describes plant form and architecture with geometrical and topological techniques. Gaining an understanding of how to modify plant morphology, through molecular biology and breeding, aided by a mathematical perspective, is critical to improving agriculture, and the monitoring of ecosystems is vital to modeling a future with fewer natural resources. In this white paper, we begin with an overview in quantifying the form of plants and mathematical models of patterning in plants. We then explore the fundamental challenges that remain unanswered concerning plant morphology, from the barriers preventing the prediction of phenotype from genotype to modeling the movement of leaves in air streams. We end with a discussion concerning the education of plant morphology synthesizing biological and mathematical approaches and ways to facilitate research advances through outreach, cross-disciplinary training, and open science. Unleashing the potential of geometric and topological approaches in the plant sciences promises to transform our understanding of both plants and mathematics.

Reassessing apoptosis in plants.

Science.gov (United States)

Dickman, Martin; Williams, Brett; Li, Yurong; de Figueiredo, Paul; Wolpert, Thomas

2017-10-01

Cell death can be driven by a genetically programmed signalling pathway known as programmed cell death (PCD). In plants, PCD occurs during development as well as in response to environmental and biotic stimuli. Our understanding of PCD regulation in plants has advanced significantly over the past two decades; however, the molecular machinery responsible for driving the system remains elusive. Thus, whether conserved PCD regulatory mechanisms include plant apoptosis remains enigmatic. Animal apoptotic regulators, including Bcl-2 family members, have not been identified in plants but expression of such regulators can trigger or suppress plant PCD. Moreover, plants exhibit nearly all of the biochemical and morphological features of apoptosis. One difference between plant and animal PCD is the absence of phagocytosis in plants. Evidence is emerging that the vacuole may be key to removal of unwanted plant cells, and may carry out functions that are analogous to animal phagocytosis. Here, we provide context for the argument that apoptotic-like cell death occurs in plants.

Ethno-Botanical Survey Of Medicinal Plants In The Plant Genetic ...

African Journals Online (AJOL)

The ethno-botanical uses and mode of administration of twenty-nine medicinal plants found in the arboretum of the Plant Genetic Resource Centre located at Bunso in the Eastern region of Ghana against some disease conditions are hereby documented. Key words: Ethnobotany, medicinal plants, arboretum, Ghana. Nig.

Incorporating environmental constraints to electricity generation in the city of Buenos Aires; Despacho economico-ambiental de la oferta de generacion de energia electrica en la ciudad de Buenos Aires

Energy Technology Data Exchange (ETDEWEB)

Dawidowski, Laura E; Gomez, Dario R; Bajano, Hector [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Quimica; Anbinder, Gustavo D; Rey, Francisco C [Comision Nacional de Energia Atomica, General San Martin (Argentina). Dept. de Reactores y Centrales Nucleares

1999-07-01

A prototype for an integrated system that includes air quality constraints to the procedure that is presently in use to determine the daily economic dispatch of power plants in Argentina is proposed. The recent incorporation of new machines to the installed capacity of the three power plants located in the densely populated metropolitan area of Buenos Aires, the thermal-based future expansion of the power sector and the relatively high nitrogen oxides concentrations that can be associated to electricity generation in the city of Buenos Aires, served to motivate this work. The prototype attempts to generate a dispatch that is compatible with the environment taking into account the present economic dispatch, weather forecast and dispersion models to evaluate ambient air concentrations of nitrogen oxides (NO{sub x}) caused by the combined operation of the thermal power plants. Although the prototype deals exclusively with NO{sub x}, since these are the pollutants of primary concern considering the fuel consumption pattern of argentinean power plants, its structure is general enough to take into account other pollutants such as sulfur dioxide and particulate matter. (author)

Kansas Power Plants

Data.gov (United States)

Kansas Data Access and Support Center — The Kansas Power Plants database depicts, as point features, the locations of the various types of power plant locations in Kansas. The locations of the power plants...

Gender in Plants

Indian Academy of Sciences (India)

What is the difference between plant sex and plant gender? Why does stress .... environmental sex determination is often predictable. Sunlit patches favour .... ensures that these self-incompatible plants receive cross-pollen only. i emporal ...

Hydroelectric Power Plants Dobsina

International Nuclear Information System (INIS)

Majercak, V.; Srenkelova, Z.; Kristak, J.G.

1997-01-01

In this brochure the Hydroelectric Power Plants Dobsina, (VED), subsidiary of the utility Slovenske Elektrarne, a.s. (Slovak Electric, plc. Bratislava) are presented. VED is mainly aimed at generating peak-load electrical energy and maintenance of operational equipment. Reaching its goals, company is first of all focused on reliability of production, economy and effectiveness, keeping principles of work safety and industry safety standards and also ecology. VED operates eight hydroelectric power plants, from which PVE Ruzin I and PVE Dobsina I are pump storage ones and they are controlled directly by the Slovak Energy Dispatch Centre located in Zilina thought the system LS 3200. Those power plants participate in secondary regulation of electrical network of Slovakia. They are used to compensate balance in reference to foreign electrical networks and they are put into operation independently from VED. Activity of the branch is focused mainly on support of fulfilment of such an important aim as electric network regulation. Beginnings of the subsidiary Hydroelectric Power Plants Dobsina are related to the year of 1948. After commissioning of the pump storage Hydroelectric Power Plants Dobsina in 1953, the plant started to carry out its mission. Since that time the subsidiary has been enlarged by other seven power plants, through which it is fulfilling its missions nowadays. The characteristics of these hydroelectric power plants (The pump-storage power plant Dobsina, Small hydroelectric power plant Dobsina II, Small hydroelectric power plant Rakovec, Small hydroelectric power plant Svedlar, Hydroelectric power plant Domasa, The pump-storage power plant Ruzin, and Small hydroelectric power plant Krompachy) are described in detail. Employees welfare and public relations are presented

Not all GMOs are crop plants: non-plant GMO applications in agriculture.

Science.gov (United States)

Hokanson, K E; Dawson, W O; Handler, A M; Schetelig, M F; St Leger, R J

2014-12-01

Since tools of modern biotechnology have become available, the most commonly applied and often discussed genetically modified organisms are genetically modified crop plants, although genetic engineering is also being used successfully in organisms other than plants, including bacteria, fungi, insects, and viruses. Many of these organisms, as with crop plants, are being engineered for applications in agriculture, to control plant insect pests or diseases. This paper reviews the genetically modified non-plant organisms that have been the subject of permit approvals for environmental release by the United States Department of Agriculture/Animal and Plant Health Inspection Service since the US began regulating genetically modified organisms. This is an indication of the breadth and progress of research in the area of non-plant genetically modified organisms. This review includes three examples of promising research on non-plant genetically modified organisms for application in agriculture: (1) insects for insect pest control using improved vector systems; (2) fungal pathogens of insects to control insect pests; and (3) virus for use as transient-expression vectors for disease control in plants.

Air pollution impedes plant-to-plant communication, but what is the signal?

Science.gov (United States)

Blande, James D; Li, Tao; Holopainen, Jarmo K

2011-07-01

Since the first reports that undamaged plants gain defensive benefits following exposure to damaged neighbors, the idea that plants may signal to each other has attracted much interest. There has also been substantial debate concerning the ecological significance of the process and the evolutionary drivers. Part of this debate has centered on the distance over which signaling between plants occurs in nature. In a recent study we showed that an ozone concentration of 80 ppb, commonly encountered in nature, significantly reduces the distance over which plant-plant signaling occurs in lima bean. We went on to show that degradation of herbivore-induced plant volatiles by ozone is the likely mechanism for this. The key question remaining from our work was that if ozone is degrading the signal in transit between plants, which chemicals are responsible for transmitting the signal in purer air? Here we present the results of a small scale experiment testing the role of the two most significant herbivore-induced terpenes and discuss our results in terms of other reported functions for these chemicals in plant-plant signaling.

Effects of planting date and plant density on crop growth of cut chrysanthemum

NARCIS (Netherlands)

Lee, J.H.; Heuvelink, E.; Challa, H.

2002-01-01

The effects of planting date (season) and plant density (32, 48 or 64 plants m-2) on growth of cut chrysanthemum (Chrysanthemum (Indicum group)) were investigated in six greenhouse experiments, applying the expolinear growth equation. Final plant fresh and dry mass and number of flowers per plant

Plant diversity increases spatio?temporal niche complementarity in plant?pollinator interactions

OpenAIRE

Venjakob, Christine; Klein, Alexandra?Maria; Ebeling, Anne; Tscharntke, Teja; Scherber, Christoph

2016-01-01

Ongoing biodiversity decline impairs ecosystem processes, including pollination. Flower visitation, an important indicator of pollination services, is influenced by plant species richness. However, the spatio-temporal responses of different pollinator groups to plant species richness have not yet been analyzed experimentally. Here, we used an experimental plant species richness gradient to analyze plant-pollinator interactions with an unprecedented spatio-temporal resolution. We observed four...

Alien plant invasions and native plant extinctions: a six-threshold framework

Science.gov (United States)

Downey, Paul O.; Richardson, David M.

2016-01-01

Biological invasions are widely acknowledged as a major threat to global biodiversity. Species from all major taxonomic groups have become invasive. The range of impacts of invasive taxa and the overall magnitude of the threat is increasing. Plants comprise the biggest and best-studied group of invasive species. There is a growing debate; however, regarding the nature of the alien plant threat—in particular whether the outcome is likely to be the widespread extinction of native plant species. The debate has raised questions on whether the threat posed by invasive plants to native plants has been overstated. We provide a conceptual framework to guide discussion on this topic, in which the threat posed by invasive plants is considered in the context of a progression from no impact through to extinction. We define six thresholds along the ‘extinction trajectory’, global extinction being the final threshold. Although there are no documented examples of either ‘in the wild’ (Threshold 5) or global extinctions (Threshold 6) of native plants that are attributable solely to plant invasions, there is evidence that native plants have crossed or breached other thresholds along the extinction trajectory due to the impacts associated with plant invasions. Several factors may be masking where native species are on the trajectory; these include a lack of appropriate data to accurately map the position of species on the trajectory, the timeframe required to definitively state that extinctions have occurred and management interventions. Such interventions, focussing mainly on Thresholds 1–3 (a declining population through to the local extinction of a population), are likely to alter the extinction trajectory of some species. The critical issue for conservation managers is the trend, because interventions must be implemented before extinctions occur. Thus the lack of evidence for extinctions attributable to plant invasions does not mean we should disregard the broader

Design and simulation of a plant control system for a GCFR demonstration plant

International Nuclear Information System (INIS)

Estrine, E.A.; Greiner, H.G.

1980-02-01

A plant control system is being designed for a 300 MW(e) Gas Cooled Fast Breeder Reactor (GCFR) demonstration plant. Control analysis is being performed as an integral part of the plant design process to ensure that control requirements are satisfied as the plant design evolves. Plant models and simulations are being developed to generate information necessary to further define control system requirements for subsequent plant design iterations

Estimation of requirements of eolic energy equivalent to the electric generation of the Laguna Verde nuclear power plant; Estimacion de requerimientos de energia eolica equivalente a la generacion electrica de la Central Nucleoelectrica de Laguna Verde

Energy Technology Data Exchange (ETDEWEB)

Garcia V, M.A.; Hernandez M, I.A. [Facultad de Ingenieria, Division de Ingenieria Electrica, UNAM, 04510 Mexico D.F. (Mexico)]. E-mail: maiki27@yahoo.com; Martin del Campo M, C. [Facultad de Ingenieria, Laboratorio de Analisis en Ingenieria de Reactores Nucleares, UNAM, Paseo Cuauhnahuac 8532, 62550 Jiutepec, Morelos (Mexico)

2004-07-01

The advantages are presented that have the nuclear and eolic energy as for their low environmental impact and to the human health. An exercise is presented in the one that is supposed that the electric power generated by the Laguna Verde Nuclear Power plant (CNLV), with capacity of 1365 M W, it should be produced by eolic energy when in the years 2020 and 2025 the units 1 and 2 of the CNLV reach its useful life and be moved away. It is calculated the number of aero generators that would produce the electric power average yearly of the CNLV, that which is equal to install eolic parks with capacity of 2758 M W, without considering that it will also be invested in systems of back generation to produce electricity when the aero generators stops for lack of wind. (Author)

Anatomical Alterations in Plant Tissues Induced by Plant-Parasitic Nematodes

Directory of Open Access Journals (Sweden)

Juan E. Palomares-Rius

2017-11-01

Full Text Available Plant-parasitic nematodes (PPNs interact with plants in different ways, for example, through subtle feeding behavior, migrating destructively through infected tissues, or acting as virus-vectors for nepoviruses. They are all obligate biotrophic parasites as they derive their nutrients from living cells which they modify using pharyngeal gland secretions prior to food ingestion. Some of them can also shield themselves against plant defenses to sustain a relatively long lasting interaction while feeding. This paper is centered on cell types or organs that are newly induced in plants during PPN parasitism, including recent approaches to their study based on molecular biology combined with cell biology-histopathology. This issue has already been reviewed extensively for major PPNs (i.e., root-knot or cyst nematodes, but not for other genera (viz. Nacobbus aberrans, Rotylenchulus spp.. PPNs have evolved with plants and this co-evolution process has allowed the induction of new types of plant cells necessary for their parasitism. There are four basic types of feeding cells: (i non-hypertrophied nurse cells; (ii single giant cells; (iii syncytia; and (iv coenocytes. Variations in the structure of these cells within each group are also present between some genera depending on the nematode species viz. Meloidogyne or Rotylenchulus. This variability of feeding sites may be related in some way to PPN life style (migratory ectoparasites, sedentary ectoparasites, migratory ecto-endoparasites, migratory endoparasites, or sedentary endoparasites. Apart from their co-evolution with plants, the response of plant cells and roots are closely related to feeding behavior, the anatomy of the nematode (mainly stylet size, which could reach different types of cells in the plant, and the secretory fluids produced in the pharyngeal glands. These secretory fluids are injected through the stylet into perforated cells where they modify plant cytoplasm prior to food removal

The microbiome of medicinal plants: diversity and importance for plant growth, quality and health.

Science.gov (United States)

Köberl, Martina; Schmidt, Ruth; Ramadan, Elshahat M; Bauer, Rudolf; Berg, Gabriele

2013-12-20

Past medicinal plant research primarily focused on bioactive phytochemicals, however, the focus is currently shifting due to the recognition that a significant number of phytotherapeutic compounds are actually produced by associated microbes or through interaction with their host. Medicinal plants provide an enormous bioresource of potential use in modern medicine and agriculture, yet their microbiome is largely unknown. The objective of this review is (i) to introduce novel insights into the plant microbiome with a focus on medicinal plants, (ii) to provide details about plant- and microbe-derived ingredients of medicinal plants, and (iii) to discuss possibilities for plant growth promotion and plant protection for commercial cultivation of medicinal plants. In addition, we also present a case study performed both to analyse the microbiome of three medicinal plants (Matricaria chamomilla L., Calendula officinalis L., and Solanum distichum Schumach. and Thonn.) cultivated on organically managed Egyptian desert farm and to develop biological control strategies. The soil microbiome of the desert ecosystem was comprised of a high abundance of Gram-positive bacteria of prime importance for pathogen suppression under arid soil conditions. For all three plants, we observed a clearly plant-specific selection of the microbes as well as highly specific diazotrophic communities that overall identify plant species as important drivers in structural and functional diversity. Lastly, native Bacillus spec. div. strains were able to promote plant growth and elevate the plants' flavonoid production. These results underline the numerous links between the plant-associated microbiome and the plant metabolome.

Plant-based raw material: Improved food quality for better nutrition via plant genomics

NARCIS (Netherlands)

Meer, van der I.M.; Bovy, A.G.; Bosch, H.J.

2001-01-01

Plants form the basis of the human food chain. Characteristics of plants are therefore crucial to the quantity and quality of human food. In this review, it is discussed how technological developments in the area of plant genomics and plant genetics help to mobilise the potential of plants to

Fiscal 1981 Sunshine Project research report. Development of hydrothermal power plant. Development of binary cycle power plant. Conceptual plant design; 1981 nendo nessui riyo hatsuden plant no kaihatsu / binary cycle hatsuden plant no kaihatsu seika hokokusho . Plant gainen sekkei

Energy Technology Data Exchange (ETDEWEB)

NONE

1982-03-01

Conceptual design was made on a 10MW class binary cycle power plant for a demonstration plant superior in reliability and profitability, under most realistic current geothermal field conditions. In the design, study was made on heat balance, main pipe system, equipment allocation, and electric system for a plant system configuration, and study was also made on preheater, evaporator, condenser, turbine and others for plant component equipment. Further study was made on optimization of mist cooling condenser, instrumentation, control, utility, and environmental measures. The following basic data were obtained through the conceptual design: plant inlet hot water temperature: 130 degrees C, plant outlet hot water temperature: 70 degrees C, hot water flow rate: 1,415t/h, working fluid: R-114, R-114 pressure in evaporator: 11.98kg/cm{sup 2} abs, R-114 evaporation temperature: 91.1 degrees C, R-114 condensation temperature: 31.0 degrees C, R- 114 flow rate: 2,265t/h, site area: 106.5m x 102.4m, building area: 48.7m x 16.8m, and building height: 13.0m. (NEDO)

Native plant community response to alien plant invasion and removal

Directory of Open Access Journals (Sweden)

Jara ANDREU

2011-01-01

Full Text Available Given the potential ecological impacts of invasive species, removal of alien plants has become an important management challenge and a high priority for environmental managers. To consider that a removal effort has been successful requires both, the effective elimination of alien plants and the restoration of the native plant community back to its historical composition and function. We present a conceptual framework based on observational and experimental data that compares invaded, non-invaded and removal sites to quantify invaders’ impacts and native plant recover after their removal. We also conduct a meta-analysis to quantitatively evaluate the impacts of plant invaders and the consequences of their removal on the native plant community, across a variety of ecosystems around the world. Our results that invasion by alien plants is responsible for a local decline in native species richness and abundance. Our analysis also provides evidence that after removal, the native vegetation has the potential to recover to a pre-invasion target state. Our review reveal that observational and experimental approaches are rarely used in concert, and that reference sites are scarcely employed to assess native species recovery after removal. However, we believe that comparing invaded, non-invaded and removal sites offer the opportunity to obtain scientific information with relevance for management.

Measuring competition in plant communities where it is difficult to distinguish individual plants

DEFF Research Database (Denmark)

Damgaard, Christian

2011-01-01

A novel method for measuring plant-plant interactions in undisturbed semi-natural and natural plant communities where it is difficult to distinguish individual plants is discussed. It is assumed that the ecological success of the different plant species in the plant community may be adequately...... measured by plant cover and vertical density (a measure that is correlated to the 3-dimensional space occupancy and biomass). Both plant cover and vertical density are measured in a standard pin-point analysis in the beginning and at the end of the growing season. In the outlined competition model....... The method allows direct measurements of the competitive effects of neighbouringzplants on plant performance and the estimation of parameters that describe the ecological processes of plantplant interactions during the growing season as well as the process of survival and recruitment between growing seasons...

Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1988-12-31

In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

Estimated losses of energy in a power system using a semi-statistical methodology; Estimacion de perdidas de energia en un sistema electrico de potencia mediante una metodologia semi-estadistica

Energy Technology Data Exchange (ETDEWEB)

Martinez Martinez, D [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mail: david_2mtz@hotmail.com; Martinez Lendech, J.F [Instituto Tecnologico de Estudios Superiores del Oriente del Estado de Hidalgo (Mexico)]. E-mail: mrtzlendech@hotmail.com; Garcia Herrera, C; Olvera Ricano, J.G. [Centro Universitario UAEM, Valle de Teotihuacan (Mexico)]. E-mails: cozobi_garcia@yahoo.com.mx; jgolverar@uaemex.mx

2013-03-15

Determination of electrical losses is one of the most important tasks for any enterprise dedicated to generation, transmission, transformation and/or distribution of electric energy. Any enterprise dedicated to these activities does continuously energy balances in order to estimate whole electrical losses of specific processes. However, it is necessary to classify the whole electrical losses into technical and non-technical losses. This paper presents a proposal for estimating technical and non-technical losses in an electrical power system. [Spanish] La determinacion de las perdidas de energia electrica es una de las labores mas importantes en cualquier empresa dedicada a la generacion, transmision, transformacion y/o distribucion de energia electrica. Es indudable que toda empresa dedicada a cualquiera de las actividades mencionadas anteriormente realiza periodicamente balances de energia que permiten estimar el valor de las perdidas totales de energia del proceso considerado. No obstante, para poder realizar un mejor analisis de la problematica de las perdidas de energia, es necesario separar el valor total de perdidas obtenido mediante un balance de energia, en perdidas tecnicas y perdidas no tecnicas. El presente trabajo presenta una propuesta para la estimacion de perdidas tecnicas y no tecnicas en un sistema electrico de potencia.

Measurement and control techniques for electric equipment development; Tecnicas de medicion y control para el desarrollo de equipos electricos

Energy Technology Data Exchange (ETDEWEB)

Ruiz Neblina, Joaquin [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1987-12-31

In broad outlines the measuring and control techniques that are used in the electric equipment development in the short circuit laboratories, are described. In this article the utilization criteria of the traditional and modern (analogical and digital) instruments are described as well as the tendency towards the system`s integration for the automation of the measurement and control processes. Also, mention is made of the systems currently being developed at the Instituto de Investigaciones Electricas (IIE) to be applied at the Short Circuit Laboratories of Comision Federal de Electricidad (CFE) and of the IIE. [Espanol] Se describen a grandes rasgos las tecnicas de medicion y control que se emplean para el desarrollo de equipos electricos en los laboratorios de corto circuito. En este articulo se describen los criterios de utilizacion de los instrumentos tradicionales y modernos (analogicos y digitales), asi como la tendencia hacia la integracion de sistemas para la automatizacion de los procesos de medicion y control. Tambien se mencionan los sistemas que actualmente se desarrollan en el Instituto de Investigaciones Electricas (IIE) para aplicarlos en los Laboratorios de Corto Circuito de la Comision Federal de Electricidad (CFE) y del Instituto.

Estimation of the resource and technological prospective of geothermal energy in Mexico (Annexe 3 in 'A vision of year 2030 on the use of the renewable energies in Mexico'); Estimacion del recurso y prospectiva tecnologica de la geotermia en Mexico (Anexo 3 en 'Una vision al 2030 de la utilizacion de las energias renovables en Mexico')

Energy Technology Data Exchange (ETDEWEB)

Iglesias R, Eduardo; Arellano G, Victor; Torres R, Rodolfo Joaquin [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

2005-08-15

Due to its individual geologic-structural characteristics, Mexico counts on abundant geothermal resources. At the moment we count on a database that includes 2,332 geothermal manifestations distributed in 27 of the 32 Mexican states, the geothermal resources are classified as high temperature and intermediate or low temperature resources. Those of high temperature can be used for the generation of electrical energy. Those of intermediate to low temperature are more appropriate for direct applications of the geothermal heat. As of today, in Mexico exist four geothermal fields of high temperature that are being exploded for the electrical generation. [Spanish] Debido a sus particulares caracteristicas geologico-estructurales, Mexico cuenta con abundantes recursos geotermicos. Actualmente contamos con una base de datos que incluye 2,332 manifestaciones geotermicas distribuidas en 27 de los 32 estados mexicanos, los recursos geotermicos se clasifican en de alta temperatura y recursos de temperatura intermedia a baja. Los de alta temperatura pueden utilizarse para la generacion de energia electrica. Los de temperatura intermedia a baja son mas apropiados para aplicaciones directas del calor geotermico. Actualmente en Mexico existen cuatro campos geotermicos de alta temperatura que estan siendo explotados para la generacion electrica.

Strategies for energy saving in warm climate dwellings; Estrategias de ahorro de energia para viviendas en clima calido

Energy Technology Data Exchange (ETDEWEB)

Pilatowsky, I [Centro de Investigacion en Energia, Universidad Nacional Autonoma de Mexico (Mexico); Ramos Niembro, Gaudencio [Comision Nacional para el Ahorro de Energia -CONAE (Mexico); Morillon, David [Instituto de Ingenieria, Universidad Nacional Autonoma de Mexico (Mexico); Oskam, A. [Centro de Fisica Aplicada y Tecnologia Avanzada, Universidad Nacional Autonoma de Mexico (Mexico)

2008-04-15

The domestic sector consumes almost one quarter of the national electrical energy. In order to reduce in an important manner the power consumption in dwellings there is an integral alternative based on three elements: the bio-climatic design, the saving and efficient use of the energy in equipment and apparatuses, and the use of centralized air conditioning systems. Besides saving the electrical and thermal power consumption, with this scheme, comfort conditions are pretended to be reached in dwellings and, contributing at the same time, to the diminution of polluting emissions. [Spanish] El sector domestico consume casi una cuarta parte de la energia electrica nacional. Con objeto de reducir de manera importante el consumo de energia en las viviendas, se presenta una alternativa integral, basada en tres elementos: el diseno bioclimatico, el ahorro y uso eficiente de la energia en equipos y aparatos, y la utilizacion de sistemas de climatizacion centralizados. Ademas del ahorro en el consumo de energia electrica y termica, con este esquema se pretende alcanzar condiciones de confort en las viviendas y, al mismo tiempo, contribuir a la disminucion de emisiones contaminantes.

Development of a electrothermal model to scale to determine the energy behavior in buildings with air conditioning; Desarrollo de un modelo electrotermico a escala para determinar el comportamiento energetico en edificaciones con aire acondicionado

Energy Technology Data Exchange (ETDEWEB)

Acoltzi, Higinio [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

2001-07-01

determinar el comportamiento energetico de modulos de prueba a escala de edificios. El modelo determina la historia del consumo de energia electrica para mantener la condiciones de confort al interior de los modulos, respecto a la variacion de los materiales de los techos y ventanas; todo esto con el objeto de establecer criterios de aplicacion de dichos materiales en la industria de la edificacion. Se presenta los consumos de energia electrica para los modulos con techos de loza monolitica, vigueta y clabovedilla y ventanas con vidrios reflectasol, filtrasol y claro. Finalmente, se presentan los resultados preliminares de la aplicacion del modelo propuesto a un edificio de escala normal. Las mediciones en campo y el modelo electrotermico teorico desarrollado, presenta diferencias promedio de 16%. Los ahorros de energia electrica observados con la aplicacion del modelo electrotermico teorico son: 1) si se cambia el vidrio claro por vidrio filtrasol, se pueden lograr ahorros de energia hasta del 14.5% para la loza de vigueta y bovedilla y de 12.4% para la loza monolitica; o 2) si se cambia el vidrio claro por vidrio reflectasol se pueden obtener ahorros de energia hasta de 28.1% para el caso de loza de vigueta y bovedilla y de 16.8% para la loza monolitica. La mejor opcion es sustituir la loza monolitica y vidrio claro por la loza de vigueta y bovedilla y vidrio reflectasol para obtener hasta un 37% de ahorro. Se muestra el arreglo de dispositivo experimental con los 3 modulos acoplados al aire acondicionado, y una con paracion grafica entre el consumo de energia acumulada teorica y experimental del modulo con loza de vigueta y bovedilla para los vidrios reflectasol, filtrasol y claro. Se da un resumen de los consumos de energia electrica totales.Verificacion experimental para determinar el comportamiento energetico de modulos de prueba a escala de edificios. El modelo determina la historia del consumo de energia electrica para mantener la condiciones de confort al interior

Role of land-based prototype plants in propulsion nuclear power plants engineering

International Nuclear Information System (INIS)

Voronin, V.E.; Prokhorov, Yu.A.

1993-01-01

Prototype plants provide a powerful tool for accomplishing tasks of development and construction of newly designed new power plants (NPPs). Leaving aside momentary political or economical considerations, one should admit that the use of prototype plants in testing of new NPPs is quite a necessity. To make the most of prototype plant, its commissioning should precede lead plant construction by 2-3 years. To make good use of prototype plants, a set of basic requirements should be fulfilled: greatest possible identity beteen the facility under test and a new series NPP; provision of high performance data acquisitoin, processing and storage firmware and a modelling system using update computer technique; and developed science infrastructure, engineering support and adequate maintenance. Prototype plants should comply with safety requirements to meet environmental protection standards

The use of plants to protect plants and food against fungal pathogens

African Journals Online (AJOL)

Background: Plant fungal pathogens play a crucial role in the profitability, quality and quantity of plant production. These phytopathogens are persistent in avoiding plant defences causing diseases and quality losses around the world that amount to billions of US dollars annually. To control the scourge of plant fungal ...

Origin and evolution of female plant from an identical male plant, in carica papaya

International Nuclear Information System (INIS)

Tariq, R.M.

2014-01-01

A field study was carried during January 2011 to March, 2013, to confirm the origin and evolution of female plant from an identical male plant in, a dioecious plant, the Carica papaya L. The plants were grown from the seeds of a normal female plant fruit. The grown, plants were identified as XX, XY and XYh (in March - April, 2012) on the basis of male and female flower bearing. The identical male plants, which usually bear only male (unisexual) flowers having calyx, corrolla and androecium, were observed also to bear bisexual flower, having calyx, corrolla, and gynoecium (ovary fused with androecium ). The fruits were set having the bisexual flowers in the identical male (hermaphrodite) plant. These fruits were kept under observation from setting to ripening stage. The ripened fruits were harvested from the identical male plants and 90-95% fruits from these plants were found with the seeds. Plants grown from these male fruit seeds produced all three type of plants i.e., male, female and hermaphrodite. This study indicated that an identical male (XYh) plant produced the female (XX) plant naturally, because of the XXY= XYh condition, which can contribute basic genetic material to male and female plants i.e an identical male (XYh = XXY= 2N +1 = 18+1= 19) produced all three type of plants, the pure male, the hermaphrodite and the female plant, originated from a single source of an identical male, as shown here. XYh = XXY g XY + XX + XXY. The propagation of all three sexes of Carica papaya from a single source of an identical male plant seeds is the first report in the world. (author)

Preferred external power supplies; Fuentes electricas preferentes exteriores

Energy Technology Data Exchange (ETDEWEB)

Martinez Anton, L.

2010-07-01

In June 2008 ANAV and ENDESA DISTRIBUCION (EDE) undertook a joint study of Asco NPP Preferred External Power Supplies (PEPSs) to check the number of lines or power supplies to the 110 kV substation at Asco that met the criteria defined in the power supply regulations applicable to Asco NPP and primarily to confirm compliance with IEEE 765-2006 standard. (Author).

Design of comprehensive plant information system considering maintenance indicators in nuclear power plant

International Nuclear Information System (INIS)

Takata, Takashi; Yamaguchi, Akira; Yamamoto, Akio

2013-01-01

A safety of a nuclear power plant must be ensured and maintained through its entire plant life. For this plant life cycle safety (PLCS), a comprehensive plant information system, in which an each maintenance record of the plant is taken into consideration, is of importance. In this paper, a development of a plant chart, which is a part of the information system, has been developed based on a defense-in-depth concept that is one of the most important concept to ensure the plant safety. In the chart, an updated probability of loss of a component or function is used as a maintenance indicator and a probabilistic risk assessment (PRA) method is applied to quantify the plant status in the chart. (author)

[Psychoactive plant species--actual list of plants prohibited in Poland].

Science.gov (United States)

Simonienko, Katarzyna; Waszkiewicz, Napoleon; Szulc, Agata

2013-01-01

According to the Act on Counteracting Drug Addiction (20-th of March, 2009, Dz. U. Nr 63 poz. 520.) the list of federally prohibited plants in Poland was expanded to include 16 new species. Until that time the only illegal plant materials were cannabis, papaver, coca and most of their products. The actual list of herbal narcotics includes species which significantly influence on the central nervous system work but which are rarely described in the national literature. The plants usually come from distant places, where--among primeval cultures--are used for ritual purposes. In our civilization the plants are usually used experimentally, recreationally or to gain particular narcotic effects. The results of the consumption vary: they can be specific or less typical, imitate other substances intake, mental disorders or different pathological states. The plant active substances can interact with other medicaments, be toxic to internal organs, cause serious threat to health or even death. This article describes the sixteen plant species, which are now prohibited in Poland, their biochemical ingredients and their influence on the human organism.

TRANSGENIC PLANT CONTAINMENT

Science.gov (United States)

The new technology using plant genetics to produce chemicals, pharmaceuticals, and therapeuitics in a wide array of new plant forms requires sufficient testing to ensure that these new plant introductions are benign in the environment. A recent effort to provide necessary guidan...

Biofuelled heating plants

International Nuclear Information System (INIS)

Gulliksson, Hans; Wennerstaal, L.; Zethraeus, B.; Johansson, Bert-Aake

2001-11-01

The purpose of this report is to serve as a basis to enable establishment and operation of small and medium-sized bio-fuel plants, district heating plants and local district heating plants. Furthermore, the purpose of this report is to serve as a guideline and basis when realizing projects, from the first concept to established plant. Taking into account all the phases, from selection of heating system, fuel type, selection of technical solutions, authorization request or application to operate a plant, planning, construction and buying, inspection, performance test, take-over and control system of the plant. Another purpose of the report is to make sure that best available technology is used and to contribute to continuous development of the technology. The report deals mainly with bio-fuelled plants in the effect range 0.3 to10 MW. The term 'plant' refers to combined power and heating plants as well as 'simpler' district heating plants. The last-mentioned is also often referred to as 'local heating plant'. In this context, the term bio fuel refers to a wide range of fuel types. The term bio fuel includes processed fractions like powders, pellets, and briquettes along with unprocessed fractions, such as by-products from the forest industry; chips and bark. Bio fuels also include straw, energy crops and cereal waste products, but these have not been expressly studied in this report. The report is structured with appendixes regarding the various phases of the projects, with the purpose of serving as a helping handbook, or manual for new establishment, helping out with technical and administrative advice and environmental requirements. Plants of this size are already expanding considerably, and the need for guiding principles for design/technology and environmental requirements is great. These guiding principles should comply with the environmental legislation requirements, and must contain advice and recommendations for bio fuel plants in this effect range, also in

Annual Plant Reviews

DEFF Research Database (Denmark)

, three dimensional structures and functions of each protein in a biological system. In plant science, the number of proteome studies is rapidly expanding after the completion of the Arabidopsis thaliana genome sequence, and proteome analyses of other important or emerging model systems and crop plants...... are in progress or are being initiated. Proteome analysis in plants is subject to the same obstacles and limitations as in other organisms, but the nature of plant tissues, with their rigid cell walls and complex variety of secondary metabolites, means that extra challenges are involved that may not be faced when...... analysing other organisms. This volume aims to highlight the ways in which proteome analysis has been used to probe the complexities of plant biochemistry and physiology. It is aimed at researchers in plant biochemistry, genomics, transcriptomics and metabolomics who wish to gain an up-to-date insight...

On-line acquisition of plant related and environmental parameters (plant monitoring) in gerbera: determining plant responses

OpenAIRE

Baas, R.; Slootweg, G.

2004-01-01

For on-line plant monitoring equipment to be functional in commercial glasshouse horticulture, relations between sensor readings and plant responses on both the short (days) and long term (weeks) are required. For this reason, systems were installed to monitor rockwool grown gerbera plants on a minute-to-minute basis from July 2002 until April 2003. Data collected included, amongst others, crop transpiration from lysimeter data (2 m2), canopy temperature using infrared sensors, rockwool water...

Next Generation Nuclear Plant Project Evaluation of Siting a HTGR Co-generation Plant on an Operating Commercial Nuclear Power Plant Site

International Nuclear Information System (INIS)

Demick, L.E.

2011-01-01

This paper summarizes an evaluation by the Idaho National Laboratory (INL) Next Generation Nuclear Plant (NGNP) Project of siting a High Temperature Gas-cooled Reactor (HTGR) plant on an existing nuclear plant site that is located in an area of significant industrial activity. This is a co-generation application in which the HTGR Plant will be supplying steam and electricity to one or more of the nearby industrial plants.

Next Generation Nuclear Plant Project Evaluation of Siting a HTGR Co-generation Plant on an Operating Commercial Nuclear Power Plant Site

Energy Technology Data Exchange (ETDEWEB)

L.E. Demick

2011-10-01

This paper summarizes an evaluation by the Idaho National Laboratory (INL) Next Generation Nuclear Plant (NGNP) Project of siting a High Temperature Gas-cooled Reactor (HTGR) plant on an existing nuclear plant site that is located in an area of significant industrial activity. This is a co-generation application in which the HTGR Plant will be supplying steam and electricity to one or more of the nearby industrial plants.