WorldWideScience

Sample records for plantain production system

  1. Competitiveness and Effects of Policies on Plantain Production Systems in Southwestern Nigeria

    Directory of Open Access Journals (Sweden)

    I. B. Adeoye

    2014-12-01

    Full Text Available Plantain is one of the most important staple crops in Nigeria and has the potential to contribute to food security and economic development of the country. There is inadequate information on competitiveness, comparative advantage and effects of government policies on the commodity. The study therefore analyzed competitiveness and effects of government policies on plantain production systems in Southwestern Nigeria. Primary data were collected using structured questionnaire from 260 producers randomly selected from major production areas in the zone. Secondary data on port charges and world prices were also utilized. Data were analyzed using Policy Analysis Matrix (PAM. Results indicated that plantain production was privately and socially profitable in all the productions systems. Domestic resource cost ratio of 0.16 – 0.19 and social cost benefit ratio of 0.20-0.23 revealed that southwestern Nigeria had comparative advantage in the production of the commodity. The policy indicators and incentives structure such as the nominal protection coefficient on output (0.31-0.42 and input (1.02-1.04, effective protection coefficient (0.26-0.37, profitability coefficient (0.21- 0.32, subsidy ratio to produces (-0.51 to -0.62 and producers subsidy estimate (-1.70 to -2.02 showed that the producers were taxed and there exists transfers of resources from the systems. The study recommends formulation of policies which are consistent with the country’s goals of agricultural transformation, food security and economic development.

  2. Yield and Economics of Plantain Production under Six Weed Management Systems in a Derived Savanna Agro Ecosystem

    Directory of Open Access Journals (Sweden)

    Echezona, BC.

    2011-01-01

    Full Text Available Le coût de la gestion des mauvaises herbes pourrait représenter jusqu'à 45% du coût total de gestion des plantations de banane plantain au Nigeria. Ainsi, l'importance des études sur l'approche intégrée de la gestion des mauvaises herbes qui permettront d'améliorer la durabilité et la rentabilité de la production du faux corne plantain. Les études de terrain ont été menées pour évaluer la croissance, le rendement des grappes et l'économie de la production de la banane plantain avec six techniques de gestion des mauvaises herbes. Les études ont été menées au cours de deux saisons culturales en 2005 et 2006 à Nsukka, au Nigeria. Le dispositif expérimental était un dispositif en blocs aléatoires complets (blocs de Fisher avec six traitements, chacun reproduit quatre fois. Les six systèmes de gestion des mauvaises herbes évalués ont été exempts de mauvaise herbe (témoin, coup de bâton à 8 semaines d'intervalle, paillage avec de la sciure, coup de bâton + application de glyphosate, paillage + application de glyphosate et de l'application du glyphosate seul. Les parcelles qui ont reçu le paillage + traitement au glyphosate avaient de meilleurs résultats que d'autres parcelles en termes de réduction de la période de floraison (334 jours, augmentation du nombre de mains par régime (4,7, le nombre de doigts commercialisables par grappe (18,6; la longueur du doigt le plus long (24,2 cm, la plus grande circonférence de doigts (15,7 cm, le rendement (4,6 t/ ha, le retour sur investissement (11.126,2 $, le ratio coût-bénéfice (3,87 et la marge brute (74,2%. Il y avait un paillage additif + effet glyphosate sur le rendement du peloton et d'autres indices économiques évalués par rapport à ou soit le paillage ou le glyphosate seul a été appliqué. Le paillage de la banane plantain avec la sciure + glyphosate à 2,16 kg/ha a été recommandé et repose sur une amélioration du rendement en fruits et une

  3. Functional properties of plantain, cowpea flours and oat fiber in extruded products

    Science.gov (United States)

    Drying effect on functional properties of two plantain and cowpea varieties and suitability of their flour blends in extruded snacks was determined. The functional and rheological behaviors of (plantain: cowpea): 90:10, 80:20, 70:30, 60:40 and 50:50 blends were evaluated. The extrusion product melt ...

  4. Conceptual design of a process plant for the production of plantain flour

    Directory of Open Access Journals (Sweden)

    Sesan Peter Ayodeji

    2016-05-01

    Full Text Available Plantain has become an essential source of food in the Nigerian market today and to this effect, it is fast becoming a sought after fruit, especially for persons diagnosed with diabetics. Being a perishable fruit, plantain is usually processed into flour to extend its shelf life. Hence, there is a need to improve on the quantity and quality of the flour produced from it. This paper presents the conceptual design of a process plant for plantain flour production from green plantain pulp. The process plant consists of washing, slicing, drying, milling and sieving machines. The design analysis of constituent machines and its performance evaluation were carried out using SolidWorks and other appropriate design equations. The designed process plant was simulated to ensure its functionality. The results of its performance were analyzed and estimated cost of production presented.

  5. ALLOCATIVE EFFICIENCY AND RESOURCE USE IN BANANA ( Musa sapientum A ND PLANTAIN ( Musa paradisiaca PRODUCTION ENTERPRISES IN BAYELSA STATE , NIGERIA

    Directory of Open Access Journals (Sweden)

    Kainga Prince Ebiowei

    2013-11-01

    Full Text Available Present study was conducted to determine the allocative efficiency and resource use of banana and plantain production enterprises in Bayelsa State of Nigeria. Three - stage sampling technique was used for drawing the samples and getting data. Total sample size was 180 farm households. The data were analyzed by using mean and production function models. Allocative efficiency and resource use results indicates farmers incapabil ity in efficient use and allocation of banana and plantain suckers, family labor and hired labor. In relation to total revenue, the elasticity of the plantain suckers showed that, an increase in it by one unit will lead to an increase in total revenue. Results from the allocative efficiency index, objective of profit maximization and equimarginal principle, indicated that banana suckers were efficiently allocated, while plantain suckers were inefficiently allocated; family and hired labor were inefficiently allocated in both banana and plantain enterprises. While plantain suckers were under - utilized, family and hired labor were both over - utilized in both enterprises, suggesting that farmers were yet to achieve absolute degree of allocative efficiency in thes e resources. However, they could profitably reduce the quantity of family and hired labor and increase plantain suckers that they employ. Thus, allocative efficiency and resource use can be enhanced by the provision of credit/ loan, good rural roads, impro ved varieties of suckers and farming technologies, extension services and subsidized farm inputs and equipment among others by Government, Non - Governmental Organizations (NGOs and institutions alike through genuine political will

  6. Modelling the Kinetics of Biogas Production from Mesophilic Anaerobic Co-Digestion of Cow Dung with Plantain Peels

    OpenAIRE

    Ganiyu Kayode Latinwo; Samuel Enahoro Agarry

    2015-01-01

    This work investigated the effect of plantain peels as co-substrate in the anaerobic digestion of cow dung for efficient and high biogas production. The biogas experiments were carried out in two different 5 L anaerobic digesters and incubated for 40 days at ambient mesophilic temperatures (28 oC to 34 °C). The results showed that co-digestion of cow dung with plantain peels as co-substrate reduced start-up time for biogas generation and increased biogas yield by 18% as compared to cow dung a...

  7. Pesticide use in banana and plantain production and risk perception among local actors in Talamanca, Costa Rica

    NARCIS (Netherlands)

    Barraza-Ruiz, D.A.; Jansen, K.; Wendel de Joode, van B.; Wesseling, C.

    2011-01-01

    The Talamanca County in Costa Rica has large-scale banana and small-scale plantain production, probably causing pesticide exposure in indigenous children. We explored to what extent different community actors are aware of children's pesticide hazards and how their awareness related to socio-economic

  8. Pesticide use in banana and plantain production and risk perception among local actors in Talamanca, Costa Rica.

    Science.gov (United States)

    Barraza, Douglas; Jansen, Kees; van Wendel de Joode, Berna; Wesseling, Catharina

    2011-07-01

    The Talamanca County in Costa Rica has large-scale banana and small-scale plantain production, probably causing pesticide exposure in indigenous children. We explored to what extent different community actors are aware of children's pesticide hazards and how their awareness related to socio-economical and cultural conditions. Methods comprised eight focus groups with fathers and mothers separately, 27 semi-structured interviews to key actors, and field observations. As a whole, the indigenous plantain farmers and banana plantation workers had some general knowledge of pesticides concerning crop protection, but little on acute health effects, and hardly any on exposure routes and pathways, and chronic effects. People expressed vague ideas about pesticide risks. Inter-community differences were related to pesticide technologies used in banana and plantain production, employment status on a multinational plantation versus smallholder status, and gender. Compared to formalized practices on transnational company plantations, where workers reported to feel protected, pesticide handling by plantain smallholders was not perceived as hazardous and therefore no safety precautions were applied. Large-scale monoculture was perceived as one of the most important problems leading to pesticide risks in Talamanca on banana plantations, and also on neighboring small plantain farms extending into large areas. Plantain farmers have adopted use of highly toxic pesticides following banana production, but in conditions of extreme poverty. Aerial spraying in banana plantations was considered by most social actors a major determinant of exposure for the population living nearby these plantations, including vulnerable children. We observed violations of legally established aerial spraying distances. Economic considerations were most mentioned as the underlying reason for the pesticide use: economic needs to obtain the production quantity and quality, and pressure to use pesticides by other

  9. Pesticide use in banana and plantain production and risk perception among local actors in Talamanca, Costa Rica

    Energy Technology Data Exchange (ETDEWEB)

    Barraza, Douglas, E-mail: dbarraza@una.ac.cr [Central American Institute for Studies on Toxic Substances, Universidad Nacional, Heredia (Costa Rica); Technology and Agrarian Development Group, Wageningen University (Netherlands); Jansen, Kees [Technology and Agrarian Development Group, Wageningen University (Netherlands); Wendel de Joode, Berna van; Wesseling, Catharina [Central American Institute for Studies on Toxic Substances, Universidad Nacional, Heredia (Costa Rica)

    2011-07-15

    The Talamanca County in Costa Rica has large-scale banana and small-scale plantain production, probably causing pesticide exposure in indigenous children. We explored to what extent different community actors are aware of children's pesticide hazards and how their awareness related to socio-economical and cultural conditions. Methods comprised eight focus groups with fathers and mothers separately, 27 semi-structured interviews to key actors, and field observations. As a whole, the indigenous plantain farmers and banana plantation workers had some general knowledge of pesticides concerning crop protection, but little on acute health effects, and hardly any on exposure routes and pathways, and chronic effects. People expressed vague ideas about pesticide risks. Inter-community differences were related to pesticide technologies used in banana and plantain production, employment status on a multinational plantation versus smallholder status, and gender. Compared to formalized practices on transnational company plantations, where workers reported to feel protected, pesticide handling by plantain smallholders was not perceived as hazardous and therefore no safety precautions were applied. Large-scale monoculture was perceived as one of the most important problems leading to pesticide risks in Talamanca on banana plantations, and also on neighboring small plantain farms extending into large areas. Plantain farmers have adopted use of highly toxic pesticides following banana production, but in conditions of extreme poverty. Aerial spraying in banana plantations was considered by most social actors a major determinant of exposure for the population living nearby these plantations, including vulnerable children. We observed violations of legally established aerial spraying distances. Economic considerations were most mentioned as the underlying reason for the pesticide use: economic needs to obtain the production quantity and quality, and pressure to use pesticides by

  10. Modelling the Kinetics of Biogas Production from Mesophilic Anaerobic Co-Digestion of Cow Dung with Plantain Peels

    Directory of Open Access Journals (Sweden)

    Ganiyu Kayode Latinwo

    2015-02-01

    Full Text Available This work investigated the effect of plantain peels as co-substrate in the anaerobic digestion of cow dung for efficient and high biogas production. The biogas experiments were carried out in two different 5 L anaerobic digesters and incubated for 40 days at ambient mesophilic temperatures (28 oC to 34 °C. The results showed that co-digestion of cow dung with plantain peels as co-substrate reduced start-up time for biogas generation and increased biogas yield by 18% as compared to cow dung alone. Peak biogas production was obtained for both digesters at pH of 6.7 and 6.9 as well as temperature of 29 and 30oC, respectively. Modelling study revealed that exponential plot simulated better in both ascending and descending limb than the linear plot the biogas production rates in biogas production from cow dung co-digested with plantain peels and cow dung alone, respectively. Logistic growth model and modified Gompertz plot showed better correlation of cumulative biogas production than exponential rise to maximum plot. These results show that biogas production can be enhanced efficiently through co-digestion process.

  11. Technical efficiency and management factors in plantain production in humid forest zone of Nigeria: A simulation analysis

    Directory of Open Access Journals (Sweden)

    DO Awotide

    2014-10-01

    Full Text Available The paper investigated the effect of changing some management factors on technical efficiency in plantain production with a view to understanding the functional relationship between technical efficiency and agricultural productivity. Data were r collected from a cross-sectional survey of two local government areas and six villages in Ibadan area of Oyo State in the humid forest zone of Nigeria. Stochastic frontier and multiple regression models were fitted and a simulation analysis was carried out on the management levels of plantain farmers. The results revealed that educational level alone did not significantly influence technical efficiency but its combination with extension assistance significantly influenced technical efficiency in the study area. Periodic extension assistance received significantly influenced technical efficiency.

  12. Effects of cowpea fortification and the level of ripeness of plantain on ...

    African Journals Online (AJOL)

    GREGO

    2007-03-19

    Mar 19, 2007 ... To obtain an acceptable cowpea fortified plantain-based snack, the fortification should be done at. 10%. ... vitamins and minerals in the plantain product. Plantain .... 53.3%, making cowpeas one of the best sources of plant.

  13. Caracterización fisicoquímica y fisiológica del proceso de maduración de plátano Hartón (musa AAB Simmonds en dos sistemas de producción Physical-chemist and physiologic characterization in the Harton plantain ripening process (Musa AAB Simmonds in organic and conventional production systems

    Directory of Open Access Journals (Sweden)

    José Luis Barrera V

    2010-01-01

    Full Text Available En el Laboratorio de Análisis de Alimentos de la Universidad de Córdoba (Colombia se realizó la caracterización fisicoquímica y fisiológica del proceso de maduración del plátano Hartón (Musa AAB Simmonds cultivado en los sistemas de producción orgánico y convencional. Para el estudio se utilizó un diseño completamente al azar con arreglo factorial 2 x 5: dos sistemas de producción y cinco estados de maduración. Los análisis realizados fueron físicos: resistencia, días de maduración; químicos: pH, °Brix, azúcares totales y reductores y almidón; y fisiológicos: tasa de respiración a temperatura ambiente. Los resultados obtenidos mostraron que entre los tratamientos (orgánico y convencional durante el proceso de maduración se observaron diferencias significativas en las variables resistencia, °Brix, pH, acidez; por el contrario las variables azúcares reductores, azúcares totales y almidón tuvieron un comportamiento similar. El índice de respiración en plátano orgánico alcanzó el pico climatérico a los 14 días, y el convencional a los 7, indicando que el primero presenta un mejor comportamiento poscosecha facilitando su comercialización.The physical-chemist and physiologic portrayal in the Harton plantain ripening process (Musa AAB Simmonds in the system of organic production and conventional in the Cordoba - Colombia department, was carried out in the food analysis laboratory of the University of Cordoba, in order to establish the differences physical-chemist and physiologic between the system production already mentioned. To reach the objective was used a design completely at random with factorial repair two per five, with two factors that were the production system and the state of ripening. The analysis carried out were physics (resistance, ripening days; chemist (pH, °Brix, total and reduction sugar, starch and physiologic (respiration rate to environmental temperature. The results obtained show that

  14. Production and Marketing Status of Bananas and Plantains in Africa%非洲香蕉和大蕉产销概况

    Institute of Scientific and Technical Information of China (English)

    王沛政; 冯慧敏

    2011-01-01

    非洲是全球重要的香蕉和大蕉产出地。2009年非洲香蕉总产约为世界的12.6%;大蕉总产约为世界的81%。两者合计非洲香蕉和大蕉总产约为世界的28%。尤其在非洲撒哈拉边缘,大蕉占了当地大约1亿居民主食的四分之一。非洲香蕉和大蕉主生产区主要分布在非洲东部、西部和中部。东部非洲各国香蕉总产大约为780万t,平均每公顷香蕉产出仅6.7t;大蕉总产大约为1 400万t;香蕉产量上乌干达、卢旺达,坦桑尼亚,肯尼亚分别为前4名;大蕉产量方面,坦桑尼亚,布隆迪、乌干达、肯尼亚分别为前4名。西部非洲各个国家香蕉总产大约为92万t;大蕉总产大约为840万t;香蕉产量上科特迪瓦、几内亚、利比里亚、加纳分别为前4名;大蕉产量方面加纳、尼日利亚、科特迪瓦、几内亚分别为前4名。中部非洲各个国家香蕉总产大约为170万t;平均每公顷单产约7 t;大蕉总产大约为306万t;香蕉产量中安哥拉、喀麦隆、刚果民主共和国、中非分别为前4名;大蕉产量方面喀麦隆、刚果民主共和国、加蓬、中非分别为前4名。尽管非洲是重要的大蕉和香蕉生产区,但只有香蕉被用于出口,目前非洲香蕉出口地主要集中在欧共体市场,占欧共体市场11%的份额,其出口长期由喀麦隆和象牙塔国家垄断,自2006年后加纳开拓了欧盟市场。%Africa is the main production region of bananas and plantains(Musa spp.) in the world.The total of bananas in Africa occupies 12.6% of banana production of the world,and plantains(AAB genome) occupy up to 81%.Putting bananas and plantains together,it account for 28% of banana consumed in the world.Bananas and plantains are important food crops in the humid forest and mid-altitude zones of sub-Saharan Africa and provide more than 25% of the carbohydrates for approximately 100 million people in the producing regions.Central,Easter and West Africa is important

  15. RESPONSE OF SELECTED LOCAL PLANTAIN CULTIVARS TO PIBS (PLANTS ISSUS DE BOURGEONS SECONDAIRES TECHNIQUE

    Directory of Open Access Journals (Sweden)

    Beloved Mensah DZOMEKU

    2014-12-01

    Full Text Available One major constraint to plantain production has been inadequate healthy planting materials at the time of planting. Several technologies for multiplying healthy planting materials exist but could not meet farmers’ demand. A study was conducted to assess the performance of various landraces plantain to plants issus de bourgeons secondaires (PIBS technique. Five cultivars of Musa sapientum (Apantu (False Horn, Asamienu (True Horn, Oniaba (intermediate French plantain and FHIA-21 (tetraploid hybrid plantain were tested to determine their response to the PIBS technique. Sword suckers of each cultivar with weight of between 0.2-0.5 kg were prepared and buried in fine sawdust in a humidity chamber built using transparent polyethylene sheets. Results at harvest showed that removal of rooted sprouts started three weeks after planting and every week thereafter for eight weeks. The intermediate French plantain cultivar (Oniaba produced the least average number (about 20 of healthy planting. Apantu (False Horn produced an average of about 75 healthy planting materials. The hybrid FHIA-21 on the other hand generated an average of about 85 healthy planting materials. Asamienu (True Horn produced the highest healthy seedlings of about 90 healthy planting materials. The results revealed that the leaf scar carries a primary bud at the intersection of each leaf sheath and several eyes along the entire length of the leaf sheath which could not have developed into suckers. However, with this technique the eyes could be activated to sprout as healthy planting materials. The technique proved as an efficient method of multiplying healthy planting materials for plantain and could thus be recommended for adoption not only by peasant farmers but also to others who could become commercial seed producers. But there will be a need for certification guidelines for seed growing systems.

  16. International institute of tropical agriculture plantain and banana ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-07-04

    Jul 4, 2008 ... Correlation analysis revealed that household size, ever questioned about plantain production problems, ... urban consumers as they provide an important source of ... with Nigeria ranking as the fifth highest producer of the.

  17. A review of somaclonal variation in plantain (Musa spp ...

    African Journals Online (AJOL)

    SARAH

    2013-07-30

    Jul 30, 2013 ... emphasis on banana and plantain and its application in the genetic improvement of Musa. Key words: Plant .... documented in several crops, e.g. oil palm (Jaligot et al. 2000), grapevine ... tuberosum L.) is one of the most important vegetable crops in the ... industrial products such as textiles, ceramics and.

  18. Produtividade da marcela [Achyrocline satureioides (lam. DC.]em cultivo solteiro e consorciado com tansagem (Plantago major l. Productivity of "marcela" [Achyrocline satureioides (Lam. DC.] in a monocrop and intercropped with common plantain (Plantago major L.

    Directory of Open Access Journals (Sweden)

    Ana Cristina Araújo Ajalla

    2009-04-01

    Full Text Available Objetivou-se, neste trabalho, avaliar o crescimento e a produção de biomassa de marcela [Achyrocline satureioides (Lam. DC.], em cultivo solteiro e consorciado com tansagem (Plantago major L. e determinar a população de plantas dessas espécies medicinais, em consorciação mais eficiente, visando o aumento produtivo e retorno econômico. Foram constituídos seis tratamentos: duas fileiras de marcela espaçadas de 0,40m (M0,40; duas fileiras de marcela espaçadas de 0,25m (M0,25; duas fileiras de tansagem espaçadas de 0,75m (T0,75; três fileiras de tansagem espaçadas de 0,40m (T0,40; duas fileiras de marcela alternadas com três fileiras 0,40 de tansagem (M0,40T0,40 e duas fileiras de marcela alternadas com duas fileiras de tansagem (M0,25T0,75. O delineamento experimental foi em blocos casualizados, com quatro repetições. Foram efetuadas colheitas de marcela aos 180, 210 e 225 dias após o transplante. Os tratamentos não influenciaram as alturas das plantas da marcela e da tansagem. As produções da marcela foram influenciadas apenas pelas três épocas de colheita sendo significativamente superior nas duas primeiras, apresentando massas de flores frescas de 2,51, 2,63 e 1,28 t ha-1, respectivamente, aos 180, 210 e 225 dias após o transplante. A massa de folhas frescas da tansagem não foi influenciada pelo consórcio mas foi maior sob o espaçamento T0,40(6,13 t ha-1 do que sob o T0,75(3,32 t ha-1. A Razão de Área Equivalente do consórcio M0,40T0,40 foi 1,6 e o de M0,25T0,75foi 2,4. Quanto à renda bruta observaram-se acréscimos de 30% para o tratamento M0,40T0,40e 77% para o tratamento M0,25T0,75comparadas ao tratamento da marcela solteira M0,25e de 70% e 131%, respectivamente, em relação à tansagem solteira T0,40.The objective of this work was to evaluate the growth and the yield of marcela [Achyrocline satureioides (Lam. DC.] biomass, in a monocrop system and intercropped with common plantain (Plantago major L. as well as

  19. Cooking Banana Consumption Patterns in the Plantain-growing Area of Southeastern Nigeria

    Directory of Open Access Journals (Sweden)

    Tshiunza, M.

    2001-01-01

    Full Text Available Cooking bananas (Musa spp., ABB genome were intro-duced into Southeastern Nigeria by the International Institute of Tropical Agriculture (IITA in the mid-1980s as an interim measure to reduce the incidence of black sigatoka disease (caused by the fungus Mycosphaerel-la fijiensis Morelet on plantain. However, the people of this region were not familiar with their utilisation methods. To address this lack of the knowledge and thereby sustain cooking banana cultivation, IITA, in collaboration with the Shell Petroleum Development Company (SPDC and the Nigeria Agip OU Company (NAOC commenced a training campaign on cooking banana processing methods. This study examined the patterns of utilisation of cooking bananas ten years after the training took place and compared them with plantain. About 95 % of the households interviewed are consuming cooking banana, indicating a broad acceptance of the crop in the region. Overall, two ripening stages termed green and ripe are the most popular ripening stages for the consumption of both plantain and cooking banana, followed by partially ripe maturity stage. The most common forms of consumption for green plantain are, in decreasing order of importance, pottage, boiled, roasted, and fried. Green cooking banana is also mostly eaten in pottage and boiled forms, and less frequently in fried and pounded forms. Ripe plantain is mostly eaten in fried and pottage forms, while ripe cooking banana is mostly eaten in fried and raw forms. Partially ripe plantain is mostly eaten in pottage, fried, boiled, and roasted forms, while partially ripe cooking banana is eaten in fried, pottage and boiled forms. These results indicate that the consumption patterns of plantain and cooking banana are very similar. This similarity has greatly contributed to the rapid integration of cooking banana within the existing plantain consumption and cropping systems.

  20. Ripening influences banana and plantain peels composition and energy content.

    Science.gov (United States)

    Emaga, Thomas Happi; Bindelle, Jérôme; Agneesens, Richard; Buldgen, André; Wathelet, Bernard; Paquot, Michel

    2011-01-01

    Musa sp. peels are widely used by smallholders as complementary feeds for cattle in the tropics. A study of the influence of the variety and the maturation stage of the fruit on fermentability and metabolisable energy (ME) content of the peels was performed using banana (Yangambi Km5) and plantain (Big Ebanga) peels at three stages of maturation in an in vitro model of the rumen. Peel samples were analysed for starch, free sugars and fibre composition. Samples were incubated in the presence of rumen fluid. Kinetics of gas production were modelled, ME content was calculated using prediction equation and short-chain fatty acids production and molar ratio were measured after 72 h of fermentation. Final gas production was higher in plantain (269-339 ml g(-1)) compared to banana (237-328 ml g(-1)) and plantain exhibited higher ME contents (8.9-9.7 MJ/kg of dry matter, DM) compared to banana (7.7-8.8 MJ/kg of DM). Butyrate molar ratio decreased with maturity of the peels. The main influence of the variety and the stage of maturation on all fermentation parameters as well as ME contents of the peels was correlated to changes in the carbohydrate fraction of the peels, including starch and fibre.

  1. Agronomic Performance of Two Tetraploid Hybrid Plantains in Ghana

    Directory of Open Access Journals (Sweden)

    Beloved Mensah Dzomeku

    2009-12-01

    Full Text Available Field performance of two IITA plantain hybrids (‘PITA-1’, ‘PITA-4’ were assessed at two locations in Ghana alongside two local landraces (False Horn ‘Brodeyuo’, Intermediate French ‘Oniaba’ and a hybrid cultivar ‘Apem Hemaa’ (‘FHIA-21’. The objective of the study was to identify high yielding and disease resistant hybrids for growers in Ghana. The hybrids were evaluated for their agronomic performance and yield, tolerance to Black Sigatoka disease, number of functional leaves at flowering and at harvest, crop cycle, plant height and pseudostem girth. The results showed that the hybrids were tolerant/resistant to the Black Sigatoka (Mycosphaerella fi jiensis disease with high number of functional leaves at flowering and at harvest. This characteristic of the hybrids was an important feature that could fit well into the smallholder cropping system. The crop cycles were comparable to that of ‘False Horn’ plantains. The yield performance of the hybrids was better compared to the landraces. The number of hands per bunch produced by the hybrids was also higher than those of the landraces except the intermediate French plantain (‘Oniaba’. The finger lengths of the IITA hybrids were however shorter compared to the landraces and this could hinder their acceptance by consumers.

  2. Quantitative proteomic analysis reveals that antioxidation mechanisms contribute to cold tolerance in plantain (Musa paradisiaca L.; ABB Group) seedlings.

    Science.gov (United States)

    Yang, Qiao-Song; Wu, Jun-Hua; Li, Chun-Yu; Wei, Yue-Rong; Sheng, Ou; Hu, Chun-Hua; Kuang, Rui-Bin; Huang, Yong-Hong; Peng, Xin-Xiang; McCardle, James A; Chen, Wei; Yang, Yong; Rose, Jocelyn K C; Zhang, Sheng; Yi, Gan-Jun

    2012-12-01

    Banana and its close relative, plantain are globally important crops and there is considerable interest in optimizing their cultivation. Plantain has superior cold tolerance compared with banana and a thorough understanding of the molecular mechanisms and responses of plantain to cold stress has great potential value for developing cold tolerant banana cultivars. In this study, we used iTRAQ-based comparative proteomic analysis to investigate the temporal responses of plantain to cold stress. Plantain seedlings were exposed for 0, 6, and 24 h of cold stress at 8 °C and subsequently allowed to recover for 24 h at 28 °C. A total of 3477 plantain proteins were identified, of which 809 showed differential expression from the three treatments. The majority of differentially expressed proteins were predicted to be involved in oxidation-reduction, including oxylipin biosynthesis, whereas others were associated with photosynthesis, photorespiration, and several primary metabolic processes, such as carbohydrate metabolic process and fatty acid beta-oxidation. Western blot analysis and enzyme activity assays were performed on seven differentially expressed, cold-response candidate plantain proteins to validate the proteomics data. Similar analyses of the seven candidate proteins were performed in cold-sensitive banana to examine possible functional conservation, and to compare the results to equivalent responses between the two species. Consistent results were achieved by Western blot and enzyme activity assays, demonstrating that the quantitative proteomics data collected in this study are reliable. Our results suggest that an increase of antioxidant capacity through adapted ROS scavenging capability, reduced production of ROS, and decreased lipid peroxidation contribute to molecular mechanisms for the increased cold tolerance in plantain. To the best of our knowledge, this is the first report of a global investigation on molecular responses of plantain to cold stress by

  3. Quantitative Proteomic Analysis Reveals that Antioxidation Mechanisms Contribute to Cold Tolerance in Plantain (Musa paradisiaca L.;ABB Group) Seedlings

    Institute of Scientific and Technical Information of China (English)

    Qiaosong Yang; Junhua Wu; Chunyu Li; Yuerong Wei; Ou Sheng; Chunhua Hu; Ruibin Kuang

    2012-01-01

    Banana and its close relative,plantain are globally important crops and there is of considerable interest in optimizing their cultivation.Plantain has superior cold tolerance compared to banana and a thorough understanding of the molecular mechanisms and responses of plantain to cold stress has great potential value for developing cold tolerant banana cultivars.In this study,we used iTRAQ-based comparative proteomic analysis to investigate the temporal responses of plantain to cold stress.Plantain seedlings were exposed for 0,6 and 24 h of cold stress at 8℃ and subsequently allowed to recover for 24 h at 28℃.A total of 3,477 plantain proteins were identified,of which 809 showed differential expression from the three treatments.The majority of differentially expressed proteins were predicted to be involved in oxidation-reduction,including oxylipin biosynthesis,while others were associated with photosynthesis,photorespiration and several primary metabolic processes,such as carbohydrate metabolic process and fatty acid beta-oxidation.Western blot analysis and enzyme activity assays were performed on 7 differentially expressed,cold-response candidate plantain proteins in order to validate the proteomics data.Similar analyses of the 7 candidate proteins were performed in cold-sensitive banana to examine possible functional conservation and to compare the results to equivalent responses between the two species.Consistent results were achieved by Western blot and enzyme activity assays,demonstrating that the quantitative proteomics data collected in this study are reliable.Our results suggest that an increase of antioxidant capacity through adapted ROS scavenging capability,reduced production of ROS and decreased lipid peroxidation contribute to molecular mechanisms for the higher cold tolerance in plantain.To the best of our knowledge,this is the first report of a global investigation on molecular responses of plantain to cold stress by proteomic analysis.

  4. Profitability analysis of plantain marketing in Kaduna metropolis ...

    African Journals Online (AJOL)

    Profitability analysis of plantain marketing in Kaduna metropolis, Kaduna state Nigeria. ... and to examine the structure of plantain market in Kaduna Metropolis. ... Most respondents are married and educated having a household size of ...

  5. Physicochemical studies on starches isolated from plantain cultivars, plantain hybrids and cooking bananas

    Energy Technology Data Exchange (ETDEWEB)

    Eggleston, G.; Akoni, S. (International Inst. of Tropical Agriculture, Ibadan (Nigeria)); Swennen, R. (Catholic Univ. of Leuven, Heverlee (Belgium). Lab. of Tropical Husbandry)

    1992-04-01

    Starches from mature, unripe fruit pulp of plantain cultivars (Musa supp., AAB group) representing the wide variability in Africa, tetraploid and diploid plantain hybrids and starchy cooking bananas (Musa spp., ABB group) were isolated and characterised. In general, studies revealed very compact irregularly shaped and sized granules, with low amylose content (9.11-17.16%), highly resistant to bacterial {alpha}-amylase attack; Brabender amylograms showed very restricted swelling type patterns with great stability and negligible retrogradation. Results indicate that differences in physico-chemical properties exist amongst the three Musa fruit group starches. Plantains represent a chemical/molecular homogeneous group, but heterogeneous for granule structure. Ploidy level affected hybrid properties. ABB cooking bananas starches exhibited highly pronounced restricted swelling and high gelatinisation and pasting temperatures, indicating a more ordered, very strongly bonded granule structure; chemical and physical properties varied considerably within the ABB genotype. (orig.).

  6. Antioxidant effect of unripe plantain ( Musa paradisiacae ) on ...

    African Journals Online (AJOL)

    Antioxidant effect of unripe plantain ( Musa paradisiacae ) on oxidative stress in ... Result: The diabetic rabbits placed on unripe plantain diet had a decrease in ... comparable to that of standard vitamin C (83.20±0.00%) in addition to a high ...

  7. Fruit physical characteristics, proximate, mineral and starch characterization of FHIA 19 and FHIA 20 plantain and FHIA 03 cooking banana hybrids

    OpenAIRE

    Annor, George Amponsah; Asamoah-Bonti, Prudence; Sakyi-Dawson, Esther

    2016-01-01

    Cooking banana and plantain (Musa spp. AAB and ABB groups), have over the years been affected by pest and diseases, resulting in various organizations developing disease resistant hybrids with superior agronomic potential. The characteristics of these improved varieties needs to be studied to ascertain their suitability for use in various food systems. This study aimed at evaluating the physical characteristics, proximate and minerals composition, and characterizing the starch of plantain and...

  8. Perspectives of using greater plantain in the medical and pharmaceutical practice

    Directory of Open Access Journals (Sweden)

    Ірина Вікторівна Герасимова

    2015-11-01

    Full Text Available Expansion of the use range of well-known plant objects in medicine and pharmacy is a pressing task in the pharmaceutical science. Modern science has discovered pharmaceutical characteristics of many plants, however nowadays we still have a large volume for research in the field of phytotherapy. Greater plantain Plantago major is one of the well-known medicinal plants, which remains interesting for studying and creating medicinal products based on it.Goal. The goal of our work was to study literature sources regarding biochemical composition of medicinal plant – greater plantain and a range of herbal medicinal products based on it represented on the pharmaceutical market of Ukraine.Methods. Literary search for information regarding Plantago major, as well as structural, comparative and graphical analysis methods of the pharmaceutical market of Ukraine were made to solve the set goal.Results. As a result of the work literary data analysis was conducted in regard to the chemical composition of Plantago major and study of domestic pharmaceutical market relating to herbal medicinal products which were composed of greater plantain and other species of Plantago L.Summary. Medicinal plant Plantago major is of value and is a prospect for future studies, as well as development and creation of new original medicinal products based on it

  9. ECONOMICS OF PLANTAIN PRODUCTION IN YENAGOA LOCAL ...

    African Journals Online (AJOL)

    PRINCE

    threat to the farm economy in west and central Africa (Jeger et al, 1995). ... information of the efficiency of the technical and managerial process. Profitability in .... Cost/unit. Total cost. A: fixed cost. Knife. 1. N100.00. N 100.00. Machete. 5. N900.

  10. Comparison of Antibiotic, Probiotic and Great Plantain (Plantago major L. on Growth Performance, Serum Metabolites, Immune Response and Ileal Microbial Population of Broilers

    Directory of Open Access Journals (Sweden)

    Mazhari M

    2016-07-01

    Full Text Available The objective of the study was to compare the effects of antibiotic virginiamycin, probiotic Protexin® and Plantago major L. (plantain on performance, serum metabolites, immune response, and the ileal microbial population of broilers. The experiment was carried out with a total of 200 day-old male Ross 308 broiler chickens in a completely randomized design. Chickens were allocated to five groups consisting of T1: control diet (Con, T2: Con+0.02% virginiamycin, T3: Con+0.01% Protexin, T4: Con+0.5% plantain and T5: Con+1% plantain. Each group was divided into four replicates consisting of ten chicks each. In comparison with the control group, body weight gain increased in chickens fed Protexin and 0.5% plantain groups in the starter period, as well as by antibiotic in grower and finisher periods and by 1% plantain in all periods (P < 0.01. Supplementation of plantain and virginiamycin increased (P < 0.01 feed intake in the starter and finisher periods, respectively. Feed conversion ratio improved (P < 0.05 in finisher period only by virginiamycin. All treated birds showed an elevated relative weight of carcass and bursa, and plantain increased relative weight of the spleen (P < 0.01. All treatments demonstrated a hypocholesterolemic effect (P < 0.01 and higher level of plantain (1% decreased (P < 0.05 serum glucose, triglyceride and low-density lipoprotein-cholesterol as well. The inclusion of Protexin and plantain enhanced immune system with increased white and red blood cells as well as second anti-SRBC immune response and reduced heterophil/lymphocyte ratio in SRBC injected birds (P < 0.05. Virginiamycin decreased ileal microbial population of Lactobacillus while Protexin and plantain increased it (P < 0.01. Meanwhile, 1% plantain suppressed ileal E. coli counts. In conclusion, 1% Plantago major L. performed the best in this study because it led to increased body and carcass weight, lowered serum cholesterol and triglyceride, reduced

  11. Characterization of Fluid Transfer Properties in a Transpressive Fault System: Chaîne des Matheux Fold-and-Thrust Belt and Enriquillo-Plantain Garden Fault Zone - Haiti

    Science.gov (United States)

    Wessels, R.; Ellouz-Zimmermann, N.; Rosenberg, C.; Hamon, Y.; Battani, A.; Bellahsen, N.; Deschamps, R.; Leroy, S. D.; Momplaisir, R.

    2016-12-01

    The NW - SE trending Chaîne des Matheux (CdM) comprises the onshore frontal thrust sheet of the SW-verging Haitian fold-and-thrust belt (HFTB). The HFTB's active deformation front is covered by sediments of the Cul-de-Sac plain and is bounded on the south by the E - W trending left-lateral Enriquillo-Plantain Garden fault zone (EPGFZ). Seismicity down to the junction between the two systems has been recorded during the 12 January 2010 Mw 7.0 Léogâne earthquake. Stratigraphic, structural and kinematic field data on a transect from the CdM to the EPGFZ indicate (N)NE - (S)SW oriented shortening, which is partitioned over 1) (N)NE-dipping oblique thrusts rooted in Cretaceous basement, 2) decollement levels in both latest Cretaceous and Paleogene limestones, and 3) by strike-slip and positive flower structures along the EPGFZ. We investigated the geometry and kinematics of both fault and fracture systems, which was coupled with sampling and analysis of fluid-derived mineralizations to constrain the timing and geological evolution. C & O isotope and whole-rock analyses have been performed to characterize the geochemistry of the source of these fluids. Raman spectroscopy and fluid-inclusion analyses has been applied to selected samples to comprehend the local burial history. Fluid and gas seepages along fault planes are qualitative indicators for transfer properties between different fault segments and their connectivity with deeper crustal or mantle reservoirs. Relative timing of structures in the CdM coupled with cathodoluminescence (CL) microscopy reveals three deformation phases, characterized by associated calcite veins that precipitated from oxidizing meteoric fluids. The deeply rooted frontal CdM thrust lacks mineralization, but fluids expelled from along-strike natural springs registered He and Ne isotope ratios suggesting a strong mantle-derived component. CL microscopy results on calcite veins from the EPGFZ's fault core imply fluid circulation in an

  12. Evaluation of Freeze Tolerance in Lancelot Plantain (Plantago lanceolata L. Ecotypes under Controlled Conditions

    Directory of Open Access Journals (Sweden)

    M. Janalizadeh

    2016-02-01

    Full Text Available Introduction Lancelot Plantain (Ribwort, narrow-leaf or English plantain is a deep-rooted, short-lived perennial herb from Plantaginaceae family which has been used for various medicinal purposes for centuries, especially in Europe and only more recently has been proposed as a forage plant. The leaf of plantain is highly palatable for grazing animals, providing mineral-rich forage. Recently two productive upright cultivars of plantain have been bred and introduced, Grasslands Lancelot and the more erect winter active Ceres Tonic. Plantain grows moderately in winter but its main growth periods beings in spring and autumn with opportunistic summer growth. Although it reveals suitable winter survival in natural conditions, but there is not a lot of information about cold tolerance of this plant. So it is important to recognize the freeze tolerance of narrow leaf plantain for successful planting and utilization in cold regions such as Mashhad in Khorasan Razavi Province (Northeast of Iran. Determining LT50 point or critical temperature for survival of plant is the most reliable and simple method for evaluating cold tolerance of plants. Another reliable method for freeze tolerance of plants is estimation of temperature at which 50 % of dry matter reduces (RDMT50. This experiment was carried out to evaluate freeze tolerance of five ecotypes of Lancelot plantain according to the LT50su and RDMT50 indices. Materials and Methods In order to evaluate freeze tolerance of Lancelot plantain, a factorial experiment based on completely randomized design with three replications was carried out under controlled conditions at college of agriculture, Ferdowsi University of Mashhad. Five ecotypes of Lancelot plantain (Bojnourd, Kalat, Mashhad, Ghayen and Birjand after three months growth and hardening in natural environment were transferred to a Thermo gradient freezer on January 20th, 2012 and exposed to eight freezing temperatures (Zero, -3, -6, -9, -12, -15, -18

  13. Preparation and characterization of octenylsuccinylated plantain starch.

    Science.gov (United States)

    Bello-Flores, Christopher A; Nuñez-Santiago, Maria C; San Martín-Gonzalez, María F; BeMiller, James N; Bello-Pérez, Luis A

    2014-09-01

    Plantain starch was esterified with octenylsuccinic anhydride (OSA) at two concentrations (3 and 15% w/w) of OSA. The morphology, granule size distribution, pasting, gelatinization, swelling, and solubility of granules and structural features of the starch polymers were evaluated. Granules of the OSA-modified starches increased in size during cooking more than did the granules of the native starch, and the effect was greater at the higher OSA concentration. Pasting viscosities also increased, but gelatinization and pasting temperatures and enthalpy of gelatinization decreased in the OSA-modified starches. It was concluded that insertion of OS groups effected disorder in the granular structure. Solubility, weight average molar mass, Mw¯, and z-average radius of gyration, RGz, of the amylopectin decreased as the OSA concentration increased, indicating a decrease in molecular size. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Effect of cooking on banana and plantain texture.

    Science.gov (United States)

    Qi, B; Moore, K G; Orchard, J

    2000-09-01

    The effect of temperature and duration of cooking on plantain and banana fruit texture and cytpoplasmic and cell wall components was investigated. The firmness of both banana and plantain pulp tissues decreased rapidly during the first 10 min of cooking in water above 70 degrees C, although plantain was much firmer than banana. Cooking resulted in pectin solubilzation and middle lamella dissolution leading to cell wall separation (as observed by SEM). Dessert banana showed more advanced and extensive breakdown than plantain. Although dessert banana had a higher total pectin content than plantain, the former had smaller-sized carboxyethylenediaminetetraacetic acid (CDTA) soluble pectic polymers which are associated with plant tissues that have a propensity to soften. Plantain had higher levels of starch and amylose than banana but this was associated with a firmer fruit texture rather than a softening due to cell swelling during starch gelatinization. Different cooking treatments showed that cooking in 0.5% of CaCl(2) solution and temperatures below 70 degrees C had significant effects on maintenance of pulp firmness.

  15. Effects of high CO2 treatment on green-ripening and peel senescence in banana and plantain fruits

    Institute of Scientific and Technical Information of China (English)

    SONG Mu-bo; TANG Lu-ping; ZHANG Xue-lian; BAI Mei; PANG Xue-qun; ZHANG Zhao-qi

    2015-01-01

    Banana fruit (Musa, AAA group, cv. Brazil) peel fails to ful y degreen but the pulp ripens normal y at temperatures above 24°C. This abnormal ripening, known as green-ripening, does not occur in plantains (Musa, ABB group, cv. Dajiao). Based on the fact that un-completely yel owing was also observed for bananas in poorly ventilated atmospheres, in the present study, the effect of high CO2 with regular O2 (21%) on banana ripening was investigated along with that on plantains at 20°C. The results showed that high CO2 conferred different effects on the color changing of bananas and plantains. After 6 d ripening in 20%CO2, plantains ful y yel owed, while bananas retained high chlorophyl content and stayed green. In contrast to the differentiated color changing patterns, the patterns of the softening, starch degradation and soluble sugar accumulation in the pulp of 20%CO2 treated bananas and plantains displayed similarly as the patterns in the fruits ripening in regular air, indicating that the pulp ripening was not inhibited by 20%CO2, and the abnormal ripening of bananas in 20%CO2 can be considered as green ripening. Similar expression levels of chlorophyl degradation related genes, SGR, NYC and PaO, were detected in the peel of the control and treated fruits, indicating that the repressed degreening in 20%CO2 treated bananas was not due to the down-regulation of the chlorophyl degradation related genes. Compared to the effect on plantains, 20%CO2 WUHDWmHQW GHOD\\HG WKH GHFOLQH LQ WKH FKORURSK\\O ÀRUHVFHQFH Fv/Fm) values and in the mRNA levels of a gene coding smal subunit of Rubisco (SSU), and postponed the disruption of the ultrastructure of chloroplast in the peel tissue of bananas, indicating that the senescence of the green cel s in the exocarp layer was delayed by 20%CO2, to more extent in bananas than in plantains. High CO2 reduced the ethylene production and the expression of the related biosynthesis gene, ACS, but elevated the respiration rates in both

  16. Effects of uniquely processed cowpea and plantain flours on wheat bread properties

    Science.gov (United States)

    The effect of incorporating uniquely processed whole-seed cowpeas or plantain flours at 10 or 20 g/100 g in all-purpose flour on paste viscosity and bread-baking properties in model bread was determined. Flours from plantains processed as follows: unblanched plantains dried at 60 degrees C (PLC), so...

  17. New subtilisin-like collagenase from leaves of common plantain.

    Science.gov (United States)

    Bogacheva, A M; Rudenskaya, G N; Dunaevsky, Y E; Chestuhina, G G; Golovkin, B N

    2001-06-01

    A new subtilisin-like proteinase hydrolyzing chromogenic peptide substrate Glp-Ala-Ala-Leu-p-nitroanilide optimally at pH 8.1 was found in common plantain leaves. The protease named plantagolisin was isolated by ammonium sulfate precipitation of the leaves' extract followed by affinity chromatography on bacitracin-Sepharose and ion-exchange chromatography on Mono Q in FPLC regime. Its molecular mass is 19000 Da and pI 5.0. pH-stability range is 7-10 in the presence of 2 mM Ca(2+), temperature optimum is 40 degrees C. The substrate specificity of subtilase towards synthetic peptides and insulin B-chain is comparable with that of two other subtilisin-like serine proteinases: proteinase from leaves of the sunflower and taraxalisin. Besides, the proteinase is able to hydrolyze substrates with Pro in P(1) position. The enzyme hydrolyzes collagen. alpha and beta chains are hydrolyzed simultaneously in parallel; there are only low-molecular-mass hydrolysis products in the sample after 2 h of incubation. Pure serine proteinase was inactivated by specific serine proteinases inhibitors: diisopropylfluorophosphate, phenylmethylsulfonyl fluoride and Hg(2+). The plantagolisin N-terminal sequence ESNSEQETQTESGPGTAFL-, traced for 19 residues, revealed 37% homology with that of subtilisin from yeast Schizosaccharomyces pombe.

  18. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    Abstract: To day, more and more products are customized. Trends are not only to sell a product to the customer, but to sell a product system. The system can either be a combination of physical products or physical products together with some kind of service. Customers get in this way not a product...... but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...... the decoupling point has a central role. The scope for this article is therefore to analyse the possibilities for using modularisation in designing and controlling a production system. How will the development of modularised product systems influence the production system? In the paper, a case will be used...

  19. Production of Modularised Product Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter

    2004-01-01

    Abstract: To day, more and more products are customized. Trends are not only to sell a product to the customer, but to sell a product system. The system can either be a combination of physical products or physical products together with some kind of service. Customers get in this way not a product...... but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...... the decoupling point has a central role. The scope for this article is therefore to analyse the possibilities for using modularisation in designing and controlling a production system. How will the development of modularised product systems influence the production system? In the paper, a case will be used...

  20. Structure, conduct and performance of Plantain Marketing in Edo ...

    African Journals Online (AJOL)

    Structure, conduct and performance of Plantain Marketing in Edo State, Nigeria. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Journal of Applied Sciences and Environmental Management ... that they used both open display and persuasive efforts to attract customers.

  1. Taxonomic-linguistic study of plantain in Africa.

    NARCIS (Netherlands)

    Rossel, G.

    1998-01-01

    Plantain is a cooking banana (Musa spp. AAB group (Musaceae)) that is grown as a major food crop in many parts of Africa, especially in the Central-African and West-African rain forest areas. The crop originated in Asia, but its greatest diversity is to be found in Africa.We are dealing here with an

  2. Assessment of nutritional quality, glycaemic index, antidiabetic and sensory properties of plantain (Musa paradisiaca)-based functional dough meals.

    Science.gov (United States)

    Famakin, Opeyemi; Fatoyinbo, Akindele; Ijarotimi, Oluwole Steve; Badejo, Adebanjo Ayobamidele; Fagbemi, Tayo Nathaniel

    2016-11-01

    Nutrition transition to high energy-dense foods has been implicated as the major causes of diet related diseases. Plantain-based dough meals supplemented with soybean cake and cassava fibre were developed by combining them in different proportions using response surface methodology. The flour blends were analyzed for the nutritional composition while the glycaemic index, antidiabetic potentials and protein digestibility of the dough meals were determined in wistar rats. The nutritional and essential amino acid contents of the flour blends were comparable to that of cerolina (a commercially available food product commonly recommended for diabetic patients). The rats fed with the formulated dough meals had lower glycaemic index and glycaemic load, and the blood glucose was significantly reduced compared to cerolina and metformin (a synthetic antidiabetic drug). All the plantain-based dough meals were comparable to cerolina and metformin in terms of nutritional quality and blood glycaemic control activities, respectively. Hence, the formulated plantain-based dough meals have potential to be used for the prevention and management of diabetes mellitus.

  3. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  4. Product Service Systems

    DEFF Research Database (Denmark)

    Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

  5. Field resistance of transgenic plantain to nematodes has potential for future African food security

    OpenAIRE

    Tripathi, L.; Babirye, A.; Roderick, H; Tripathi, JN; Changa, C; Urwin, PE; Tushemereirwe, WK; Coyne, D.; Atkinson, HJ

    2015-01-01

    Plant parasitic nematodes impose losses of up to 70% on plantains and cooking bananas in Africa. Application of nematicides is inappropriate and resistant cultivars are unavailable. Where grown, demand for plantain is more than for other staple crops. Confined field testing demonstrated that transgenic expression of a biosafe, anti-feedant cysteine proteinase inhibitor and an anti-root invasion, non-lethal synthetic peptide confers resistance to plantain against the key nematode pests Radopho...

  6. In Vitro Prevention of Browning in Plantain Culture

    Directory of Open Access Journals (Sweden)

    Innocent C. Onuoha

    2011-01-01

    Full Text Available Problem statement: The in vitro propagation of plantain (Musa paradisiaca is still faced with lots of challenges such as blackening or browning of tissues prior to culture due to the oxidation of phenolic compound by polyphenolic oxidase enzyme present in the tissue when excised. Approach: Understanding browning processes in plantain and possible ways of minimizing it during excision of explants with particular emphasis on the use of antioxidants was purposed. Tissues were surfaced sterilized with 0.1% (w/v HgCL2 for 1-6 min to get a pure culture and then treated for 2 h with different concentrations of 0.1-0.5 mg mL- of potassium citrate and citrate (K-C: C as an antioxidant to check browning while sterile distilled water was used as control. Results and Conclusion: The result showed that contamination free culture (100% was achieved in the explants treated with HgCL2 for 6 min. Also the various concentration of K-C: C prevented browning within 2 h before culturing the tissues inferring that browning in young plantain excised tissue can be greatly reduced by presoaking or pretreatment with antioxidant solution of potassium citrate-citrate before culturing them.

  7. [Preparation of cookies with a flour mixture of wheat and green plantain].

    Science.gov (United States)

    Maldonado, R; Pacheco de Delahaye, E

    2000-12-01

    With the purpose of diversifying the use of green plantain flour, a functional evaluation was performed by substituting 7% of chocolate cookie wheat flour by dehydrated green plantain flour; thus allowing to obtain a product with good physical and organoleptic qualities, as well as a better nutritional quality, as for dietary fibre and resistant starch. As a result of the use of this dehydrated green plantain flour (G-HT/HPV), the values of some chemical components increased significantly (P 0.05 Pound) in comparison to the standard cookies (GP): ash (2.46 to 2.69%), proteins (8.93 to 9.69%), dietary fiber (4.97 to 5.40%), resistant starch (0.19 to 0.23%) and total sugar (25.26 to 30.55). The G-HT/HPV complies with the industrial requirements as for moisture (2.7300%), ph (8.43), aw (0.205) and color (L = 31.78; a = 7.95 and b = 10.51). Besides, thanks to the use of G-HT/HPV the flours scattering during the kneaded process was diminished, thus reducing the cookie diameter and increasing the resistance to breaking (1.48 to 2.06 Kgf), in comparison to the GP. While evaluating the shelf life for G-HT/HPV, it was demonstrated that was affected by moisture, pH, aw and acidity after the first month of storage. In the preference comparison test between the G-HT/HPV and a trademark cookie (GC), no significant differences were founded. Both were accepted and qualified between good and very good, as for sensorial features like colour, fragrance and taste. However, significant differences were detected in relation to texture, and they were corroborated in the texture profile analysis. In this test the panel staff, while evaluating both types of cookies demonstrated that there are 8 features that can be used to describe them: firm, crumble, crisp, mealy, soft, lumpy, particle size and chewy.

  8. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...... from implementing PCS. The three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, 3)less resource intensity.......Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

  9. Agronomic Performance of Two Tetraploid Hybrid Plantains in Ghana

    OpenAIRE

    Beloved Mensah Dzomeku; Asieduwa Agnes Ankomah; Solomon Kodjo Darkey

    2009-01-01

    Field performance of two IITA plantain hybrids (‘PITA-1’, ‘PITA-4’) were assessed at two locations in Ghana alongside two local landraces (False Horn ‘Brodeyuo’, Intermediate French ‘Oniaba’) and a hybrid cultivar ‘Apem Hemaa’ (‘FHIA-21’). The objective of the study was to identify high yielding and disease resistant hybrids for growers in Ghana. The hybrids were evaluated for their agronomic performance and yield, tolerance to Black Sigatoka disease, number of functional leaves at flowering ...

  10. Taxonomic-linguistic study of plantain in Africa.

    OpenAIRE

    Rossel, G.

    1998-01-01

    Plantain is a cooking banana (Musa spp. AAB group (Musaceae)) that is grown as a major food crop in many parts of Africa, especially in the Central-African and West-African rain forest areas. The crop originated in Asia, but its greatest diversity is to be found in Africa.We are dealing here with an interspecific, triploid hybrid of Musa balbisiana and one or more sub-species of M. acuminata, with the genome formula AAB. The plant is sterile and can only be multiplied clonally, which is why b...

  11. Ripening influences banana and plantain peels composition and energy content

    OpenAIRE

    Happi Emaga, Thomas; Bindelle, Jérôme; Angeesens, Richard; Buldgen, André; Wathelet, Bernard; Paquot, Michel

    2011-01-01

    Musa sp. peels are widely used by smallholders as complementary feeds for cattle in the tropics. A study of the influence of the variety and the maturation stage of the fruit on fermentability and metabolisable energy (ME) content of the peels was performed using banana (Yangambi Km5) and plantain (Big Ebanga) peels at three stages of maturation in an in vitro model of the rumen. Peel samples were analysed for starch, free sugars and fibre composition. Samples were incubated in the presence o...

  12. Product Configuration Systems and Productivity

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...... from implementing PCS. The three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, 3)less resource intensity....

  13. Pesticide Product Label System

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

  14. Gluten-free spaghetti with unripe plantain, chickpea and maize: physicochemical, texture and sensory properties

    National Research Council Canada - National Science Library

    Flores-Silva, Pamela C; Berrios, Jose De J; Pan, James; Agama-Acevedo, Edith; Monsalve-González, Adelmo; Bello-Pérez, Luis A

    2015-01-01

    The purpose of this investigation was to determine the physicochemical, textural and sensorial characteristics of gluten-free spaghetti elaborated with unripe plantain, chickpea and maize flours. Luminosity (L...

  15. Fruit physical characteristics, proximate, mineral and starch characterization of FHIA 19 and FHIA 20 plantain and FHIA 03 cooking banana hybrids.

    Science.gov (United States)

    Annor, George Amponsah; Asamoah-Bonti, Prudence; Sakyi-Dawson, Esther

    2016-01-01

    Cooking banana and plantain (Musa spp. AAB and ABB groups), have over the years been affected by pest and diseases, resulting in various organizations developing disease resistant hybrids with superior agronomic potential. The characteristics of these improved varieties needs to be studied to ascertain their suitability for use in various food systems. This study aimed at evaluating the physical characteristics, proximate and minerals composition, and characterizing the starch of plantain and a cooking banana hybrid release by Fundación Hondureña de Investigación Agrícola (FHIA), and comparing them to a local landrace in Ghana. FHIA 19 and FHIA 20 plantain, Apentu pa (a local landrace) and FHIA 03 cooking banana hybrid were used for the study. Their physical characteristics, proximate and mineral composition were determined at the proximal, midsection and distal hand positions. Starch granules and cells were then examined under light microscope. Ranges obtained for protein content for FHIA 20, FHIA 03 and FHIA 19 were 3.01-3.40, 2.66-2.91 and 2.81-2.91 %. Potassium was found to be the most abundant mineral in all the cultivars. The highest mean value of 982.5-1013.76 mg/100 g was obtained for FHIA 19. There were significant differences (p starch granule size was found in FHIA 19 hybrid. FHIA 03 was also composed predominantly of two types: longitudinal and rounded granules with each type grouped together. The new plantain hybrids compared very well with the local landrace hence making them suitable to be incorporated into local food systems.

  16. Gluten-free snacks using plantain-chickpea and maize blend: chemical composition, starch digestibility, and predicted glycemic index.

    Science.gov (United States)

    Flores-Silva, Pamela C; Rodriguez-Ambriz, Sandra L; Bello-Pérez, Luis A

    2015-05-01

    An increase in celiac consumers has caused an increasing interest to develop good quality gluten-free food products with high nutritional value. Snack foods are consumed worldwide and have become a normal part of the eating habits of the celiac population making them a target to improve their nutritive value. Extrusion and deep-frying of unripe plantain, chickpea, and maize flours blends produced gluten-free snacks with high dietary fiber contents (13.7-18.2 g/100 g) and low predicted glycemic index (28 to 35). The gluten-free snacks presented lower fat content (12.7 to 13.6 g/100 g) than those reported in similar commercial snacks. The snack with the highest unripe plantain flour showed higher slowly digestible starch (11.6 and 13.4 g/100 g) than its counterpart with the highest chickpea flour level (6 g/100 g). The overall acceptability of the gluten-free snacks was similar to that chili-flavored commercial snack. It was possible to develop gluten-free snacks with high dietary fiber content and low predicted glycemic index with the blend of the 3 flours, and these gluten-free snacks may also be useful as an alternative to reduce excess weight and obesity problems in the general population and celiac community.

  17. production of plantain and banana in sub-saharan africa

    African Journals Online (AJOL)

    1993-03-20

    Mar 20, 1993 ... AMYT — Evaluated in advanced yield trial for potential cultivar release by NARS. — Registered in ... tance is controlled by a major recessive gene and two minor modifier ... application of chemical fertilizers fails to halt the.

  18. Innovativeness in production systems

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies...

  19. Energy production systems engineering

    CERN Document Server

    Blair, Thomas Howard

    2017-01-01

    Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

  20. Defining product service systems

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2002-01-01

    artefact and instead provides what the customer really wants the actual functionality from the product. This enables a series of potential improvements to the product´s performance throughout its lifecycle. The ideal of product service system (PSS) development is that all three stakeholder groups customer...... attempt to identify the nature of such a multiple definition of PSS, the link to proper understanding of value and utility and innovative approaches for PSS-oriented product development. This paper will expand on the phenomenon of PSS in the belief that a proper understanding of PSS will give us...

  1. Defining product service systems

    DEFF Research Database (Denmark)

    McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2002-01-01

    , for example, a factor 20 improvement in our environmental performance. One attempt, however, has recently emerged, which combines the product as an artefact with the service that the product provides to the user. Through the combination of these two facets, the company retains ownership of the physical...... artefact and instead provides what the customer really wants the actual functionality from the product. This enables a series of potential improvements to the product´s performance throughout its lifecycle. The ideal of product service system (PSS) development is that all three stakeholder groups customer......, company and society benefit from the service systems related to each one of these dimensions, rather than simply one of the above. There are existing examples of the enhancement of business and market share by focusing on PSS, but this is often not a result of upfront strategy and ambitious goals. We...

  2. Productivity Enhancement through Production Monitoring System

    OpenAIRE

    Prasad, Shiva H C; Rao, Potti Srinivasa; Gopalkrishna, B; Ahluwalia, Aakash

    2017-01-01

    A production monitoring system uses the real-time data while production is online. The real-time production monitoring systems are designed as means of auto data to the collection and monitoring the data via display boards. This study focuses on analysing the real-time production monitoring systems through trend analysis in production and over consumption of raw material controlling the over consumptions in a pen manufacturing industry. The methodology followed is through process flow diagram...

  3. Effect of incorporation of plantain and chickpea flours on the quality characteristics of biscuits.

    Science.gov (United States)

    Yadav, Ritika B; Yadav, Baljeet S; Dhull, Nisha

    2012-04-01

    Blends of plantain and chickpea flours each with concentrations of 0, 10, 20, 30 and 40% along with of refined wheat flour were used for development of biscuits. The flours were evaluated for their chemical and functional properties. Plantain flour had highest crude fiber (3.6%) and carbohydrate content (80.8%), whereas chickpea flour had highest protein content (19.3%) and fat content (4.4%). Plantain flour showed highest water absorption (167.7%) whereas lowest oil absorption capacity (144.6). The chickpea flour showed highest foaming capacity and stability. The thickness and diameter of biscuits did not differ significantly (p chickpea flours each up to a concentration of 30%. The fracture strength of biscuits increased significantly (p chickpea flours and was highest at 40% concentration (21.1 N). The protein and crude fiber content of biscuits increased significantly (p chickpea flour and plantain flours in the blends. The sensory properties of biscuits prepared by replacing refined wheat flour up to 20% each with plantain and chickpea flour were more or less similar to those of control biscuits.

  4. [Yield of starch extraction from plantain (Musa paradisiaca). Pilot plant study].

    Science.gov (United States)

    Flores-Gorosquera, Emigdia; García-Suárez, Francisco J; Flores-Huicochea, Emmanuel; Núñez-Santiago, María C; González-Soto, Rosalia A; Bello-Pérez, Luis A

    2004-01-01

    In México, the banana (Musa paradisiaca) is cooked (boiling or deep frying) before being eaten, but the consumption is not very popular and a big quantity of the product is lost after harvesting. The unripe plantain has a high level of starch and due to this the use of banana can be diversified as raw material for starch isolation. The objective of this work was to study the starch yield at pilot plant scale. Experiments at laboratory scale were carried out using the pulp with citric acid to 0,3 % (antioxidant), in order to evaluate the different unitary operations of the process. The starch yield, based on starch presence in the pulp that can be isolated, were between 76 and 86 %, and the values at pilot plant scale were between 63 and 71 %, in different lots of banana fruit. Starch yield values were similar among the diverse lots, showing that the process is reproducible. The lower values of starch recovery at pilot plant scale are due to the loss during sieving operations; however, the amount of starch recovery is good.

  5. ATLAS production system

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

    2016-01-01

    The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

  6. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  7. Development of Production Systems

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    1997-01-01

    This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

  8. Enriquillo–Plantain Garden fault zone in Jamaica: paleoseismology and seismic hazard

    Science.gov (United States)

    Koehler, R.D.; Mann, P.; Prentice, Carol S.; Brown, L.; Benford, B.; Grandison-Wiggins, M.

    2013-01-01

    The countries of Jamaica, Haiti, and the Dominican Republic all straddle the Enriquillo–Plantain Garden fault zone ( EPGFZ), a major left-lateral, strike-slip fault system bounding the Caribbean and North American plates. Past large earthquakes that destroyed the capital cities of Kingston, Jamaica (1692, 1907), and Port-au-Prince, Haiti (1751, 1770), as well as the 2010 Haiti earthquake that killed more than 50,000 people, have heightened awareness of seismic hazards in the northern Caribbean. We present here new geomorphic and paleoseismic information bearing on the location and relative activity of the EPGFZ, which marks the plate boundary in Jamaica. Documentation of a river bank exposure and several trenches indicate that this fault is active and has the potential to cause major destructive earthquakes in Jamaica. The results suggest that the fault has not ruptured the surface in at least 500 yr and possibly as long as 28 ka. The long period of quiescence and subdued geomorphic expression of the EPGFZ indicates that it may only accommodate part of the ∼7–9 mm=yr plate deformation rate measured geodetically and that slip may be partitioned on other undocumented faults. Large uncertainties related to the neotectonic framework of Jamaica remain and more detailed fault characterization studies are necessary to accurately assess seismic hazards.

  9. MACROPROPAGATION OF PLANTAIN (MUSA SPP. CULTIVARS PITA 3, FHIA 21, ORISHELE AND CORNE 1: EFFECT OF BENZYLAMINOPURINE (BAP CONCENTRATION

    Directory of Open Access Journals (Sweden)

    Deless Edmond Fulgence THIEMELE

    2015-12-01

    Full Text Available In Africa, plantain is one of the most important starchy food and cash crops. Nonetheless, one of the major constraints for its production was the unavailability of healthy planting materials at planting time. This constraint could be lifted using the cloning of planting materials via the in vitro micropropagation or in vivo macropropagation techniques. Shelled corms from four cultivars, known as PITA 3, FHIA 21, ORISHELE and CORNE 1, were used. Three treatments differing in three hormonal concentrations, especially 20.0, 30.0 and 40.0 mg L-1 were tested. The control one was hormone free. Tested treatments were laid out in a split plot design. The decorticated banana corms were sprayed twofold at 2 weeks interval with BAP solution when placed in sterilized soil in high humidity plastic tunnel. It emerged from results, regarding BAP concentration effect, that BAP treatment with 40 mg L-1 significantly reduced the emergence time of shoots at 20 days as against 25.1, 28.3 and 28.5 for the 2 tested other treatments as well as control, respectively. Likewise, the concentrations 40.0 mg L-1 both recorded the largest number of sprouted buds per corm and number of shoots per corm. With respect to banana cultivar effect, PITA 3 showed the largest number of shoots per corm. Basing on such findings, it is concluded that MSD technique combined with BAP at 40.0 mg L-1 is a suitable technique for improving of the in vivo macropropagation of plantain. This concentration increased at least 50 % of sucker production compared to control.

  10. Dataset on the abundance of ants and Cosmopolites sordidus damage in plantain fields with intercropped plants.

    Science.gov (United States)

    Dassou, Anicet Gbèblonoudo; Carval, Dominique; Dépigny, Sylvain; Fansi, Gabriel; Tixier, Philippe

    2016-12-01

    The data presented in this article are related to the research article entitled "Ant abundance and Cosmopolites sordidus damage in plantain fields as affected by intercropping" (A.G. Dassou, D. Carval, S. Dépigny, G.H Fansi, P. Tixier, 2015) [1]. This article describes how associated crops maize (Zea mays), cocoyam (Xanthosoma sagittifolium) and bottle gourd (Lagenaria siceraria) intercropped in the plantain fields in Cameroun modify ant community structure and damages of banana weevil Cosmopolites sordidus. The field data set is made publicly available to enable critical or extended analyzes.

  11. Dataset on the abundance of ants and Cosmopolites sordidus damage in plantain fields with intercropped plants

    Directory of Open Access Journals (Sweden)

    Anicet Gbèblonoudo Dassou

    2016-12-01

    Full Text Available The data presented in this article are related to the research article entitled “Ant abundance and Cosmopolites sordidus damage in plantain fields as affected by intercropping” (A.G. Dassou, D. Carval, S. Dépigny, G.H Fansi, P. Tixier, 2015 [1]. This article describes how associated crops maize (Zea mays, cocoyam (Xanthosoma sagittifolium and bottle gourd (Lagenaria siceraria intercropped in the plantain fields in Cameroun modify ant community structure and damages of banana weevil Cosmopolites sordidus. The field data set is made publicly available to enable critical or extended analyzes.

  12. Storage of soil organic carbon in coffee (Coffea arabica L. production systems in the municipality of Líbano, Tolima, Colombia

    Directory of Open Access Journals (Sweden)

    Hernán Jair Andrade Castañeda

    2013-07-01

    Full Text Available The increase in greenhouse gas emissions from anthropogenic sources has resulted in climate change, which affects all living beings. Coffee (Coffea arabica L. plantations, in monoculture or together with timber species such as salmwood (Cordia alliodora, mitigate climate change due to fixation of atmospheric CO2 that is deposited in biomass and soils. This study was carried out in the municipality of Líbano, Tolima, Colombia with the objective of defining which of the following coffee production systems store more soil organic carbon (SOC: 1 monoculture, 2 agroforestry systems (AFS with salmwood, and 3 AFS with plantain. Farms with those systems that are the most dominant in the study zone were selected. From each system, five repetitions were identified to be analyzed with a completely randomized design. In each plot or repetition, five samples for bulk density (BD using the cylinder method and a composite sample for concentration of SOC were taken and analyzed using the Walkley and Black approach. The systems of production did not significantly (p > 0.05 affect either the BD or the concentration of SOC. However, AFS with plantain tended to have less BD than monoculture and AFS with salmwood (0.83 ± 0.03 vs 0.88 ± 0.03 vs 0.92 ± 0.04 g·cm-3, respectively. These systems of production stored between 50 and 54 t·ha-1 of SOC in the top 30 cm, which indicates their capacity for climate change mitigation.

  13. EVALUASI NILAI GIZI TEPUNG PRA-MASAK PISANG TANDUK DAN PISANG RAJA NANGKA [Nutritional Evaluation of Pre-cooked “Tanduk” and “Raja Nangka” Plantain flour

    OpenAIRE

    Rosida; Dedin Finatsiyatull Rosida

    2011-01-01

    This research dealt with the nutritional evaluation of pre-cooked plantain flour in experimental Wistar rats to evaluate physical and chemical properties of the digesta of rats as well as glucose and cholesterol content of their blood. Pre-cooked plantain flour was made of 2 types of plantain, Tanduk plantain (Musa corniculata) and Raja Nangka plantain (Musa paradisiacalLinn) which have been heated and cooled under 3 conditions (boiling-cooling, steaming-cooling, and baking-cooling, prior to ...

  14. STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Diego Pacheco

    2014-05-01

    Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

  15. Production monitoring system for understanding product robustness

    DEFF Research Database (Denmark)

    Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...... study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality...

  16. Dinucleotide repeat microsatellite markers for buck's-horn plantain (Plantago coronopus)

    NARCIS (Netherlands)

    Koorevaar, G.N.; Ivanovic, S.; Van Damme, J.M.M.; Koelewijn, H.P.; Van 't Westende, W.P.C.; Smulders, M.J.M.; Vosman, B.

    2002-01-01

    Eleven polymorphic microsatellite loci were obtained from a GA enriched genomic library, constructed from DNA of buck's-horn plantain (Plantago coronopus). The microsatellite loci were tested on 24 genotypes. These plants were collected from meadows along the coast, located on 11 sites ranging from

  17. Field resistance of transgenic plantain to nematodes has potential for future African food security.

    Science.gov (United States)

    Tripathi, Leena; Babirye, Annet; Roderick, Hugh; Tripathi, Jaindra N; Changa, Charles; Urwin, Peter E; Tushemereirwe, Wilberforce K; Coyne, Danny; Atkinson, Howard J

    2015-01-30

    Plant parasitic nematodes impose losses of up to 70% on plantains and cooking bananas in Africa. Application of nematicides is inappropriate and resistant cultivars are unavailable. Where grown, demand for plantain is more than for other staple crops. Confined field testing demonstrated that transgenic expression of a biosafe, anti-feedant cysteine proteinase inhibitor and an anti-root invasion, non-lethal synthetic peptide confers resistance to plantain against the key nematode pests Radopholus similis and Helicotylenchus multicinctus. The best peptide transgenic line showed improved agronomic performance relative to non-transgenic controls and provided about 99% nematode resistance at harvest of the mother crop. Its yield was about 186% in comparison with the nematode challenged control non-transgenic plants based on larger bunches and diminished plant toppling in storms, due to less root damage. This is strong evidence for utilizing this resistance to support the future food security of 70 million, mainly poor Africans that depend upon plantain as a staple food.

  18. Register of new fruit and nut cultivars list 48. Banana, cacao, plantain

    Science.gov (United States)

    The Register of New Fruit and Nut Varieties 48 is a compilation of descriptions of new fruit and nut cultivars from around the world. In this edition, newly released banana, plantain, and cacao cultivars are described in terms of their origins, important fruit traits and yield. ...

  19. Soluble plantain fibre blocks adhesion and M-cell translocation of intestinal pathogens.

    Science.gov (United States)

    Roberts, Carol L; Keita, Asa V; Parsons, Bryony N; Prorok-Hamon, Maelle; Knight, Paul; Winstanley, Craig; O' Kennedy, Niamh; Söderholm, Johan D; Rhodes, Jonathan M; Campbell, Barry J

    2013-01-01

    Dietary fibres may have prebiotic effects mediated by promotion of beneficial bacteria. This study explores the possibility that soluble plant fibre may also improve health by inhibiting epithelial adhesion and translocation by pathogenic bacteria. We have focussed on soluble non-starch polysaccharide (NSP) from plantain bananas (Musa spp.) which previous studies showed to be particularly effective at blocking Escherichia coli epithelial adherence. In vitro and ex vivo studies assessed the ability of plantain NSP to inhibit epithelial cell adhesion and invasion of various bacterial pathogens, and to inhibit their translocation through microfold (M)-cells and human Peyer's patches mounted in Ussing chambers. Plantain NSP showed dose-related inhibition of epithelial adhesion and M-cell translocation by a range of pathogens. At 5mg/ml, a concentration readily achievable in the gut lumen, plantain NSP inhibited adhesion to Caco2 cells by Salmonella Typhimurium (85.0 ± 8.2%, PPlantain NSP also inhibited invasion of Caco2 cells by S. Typhimurium (80.2 ± 9.7%) and Sh. sonnei (46.7 ± 13.4%); PPlantain NSP, 5mg/ml, also inhibited translocation of S. Typhimurium and Sh. sonnei across M-cells by 73.3 ± 5.2% and 46.4 ± 7.7% respectively (Pplantain NSP (Pplantain fibre can block epithelial adhesion and M-cell translocation of intestinal pathogens. This represents an important novel mechanism by which soluble dietary fibres can promote intestinal health and prevent infective diarrhoea.

  20. [Nutritional evaluation of green plantain flour dehydrated soups. Starch in vitro digestibility].

    Science.gov (United States)

    Pacheco de Delahaye, E

    2001-01-01

    Previous works have shown that green plantain flour (GPF) contains a considerable amount of resistant with similar effects to dietary fiber. In order to diversify the use of this fruit the purpose of present study was to formulate and elaborate powered, dehydrated, cream type soups with green plantain flour flavored with vegetables (onion, coriander and leak) which increase the dietary fiber content of the preparation. Green plantain was peeled, cut in medium size pieces and submerged in 0.1% citric acid solution. The dehydration process was forced air-drying (80 degrees C), followed by milling. The same procedure was applied to the flavoring vegetables. To obtain the cream type soups various formulations were tried containing 50-63% resistant starch, 11.7-12% dietary fiber 6.5-6.9% protein. The mineral content of the preparations is reported. Viscosity of 1:10 (w/v) soups was 630-670 cps. In vitro starch digestibility after 6 hours was 38% with porcine amylase, increasing to 48% if the enzyme was from bacterial origin, supporting previous results that suggest resistance to hydrolysis of green plantain (GP) starch granules. In conclusion this study diversifies the use of GP and suggests that dehydrated GPF soups due to their high dietary fiber, resistant starch content and to the slow starch hydrolysis may be used in special nutrition regimes.

  1. Register of New Fruit and Nut Cultivars List 45. Banana, cacao, Spanish lime, plantain

    Science.gov (United States)

    The Register of New Fruit and Nut Varieties 45 is a compilation of descriptions of new fruit and nut cultivars from around the world. In this edition, newly released cacao, banana, plantain, and genip cultivars are described in terms of their origins, important fruit traits and yield....

  2. Gluten-free spaghetti with unripe plantain, chickpea and maize: physicochemical, texture and sensory properties

    Science.gov (United States)

    The purpose of this investigation was to determine the physicochemical, textural and sensorial characteristics of gluten-free spaghetti elaborated with unripe plantain, chickpea and maize flours. Luminosity (L*) of the uncooked gluten-free spaghetti was not significantly different from control sampl...

  3. Effects of starches on the mechanical properties of paracetamol tablet formulations. II. Sorghum and plantain starches as disintegrants.

    Science.gov (United States)

    Alebiowu, Gbenga; Itiola, Oludele Adelanwa

    2003-12-01

    This study evaluates the disintegrant properties--tablet disintegration time (DT) and crushing strength--friability/disintegration time (CSFR/DT) ratio of a paracetamol tablet formulation prepared with sorghum and plantain starches in comparison with corn starch BP. The effects of disintegrant concentration, relative density of tablets and the mode of disintegrants addition were studied. The study revealed that the rank order of effectiveness of the starches as disintegrants was corn > plantain > sorghum. The mode of addition of disintegrants, disintegrant concentration and relative density had a significant impact on the disintegrant properties. The tested starches, namely, sorghum and plantain, showed promising results.

  4. Pesticide Product Information System (PPIS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...

  5. Typology of Product Configuration Systems

    DEFF Research Database (Denmark)

    Jensen, Klaes Ladeby; Edwards, Kasper; Haug, Anders

    2007-01-01

    Many organisations are moving from mass production to mass customization. Product configuration systems (PCS) are increasingly seen as an interesting option for firms who wish to pursue a strategy with a high degree of product variance while retaining a low cost of specifying the product. To become...... more specific in relation to how product configuration systems can support mass customization, it is necessary to understand how different product configuration systems can be classified, and how these differ. This paper presents a typology of product configuration systems based on the five kinds...

  6. Dietary Supplementation with Soluble Plantain Non-Starch Polysaccharides Inhibits Intestinal Invasion of Salmonella Typhimurium in the Chicken

    OpenAIRE

    Parsons, Bryony N.; Paul Wigley; Simpson, Hannah L.; Williams, Jonathan M; Suzie Humphrey; Anne-Marie Salisbury; Watson, Alastair J. M.; FRY, STEPHEN C.; David O'Brien; Roberts, Carol L.; Niamh O'Kennedy; Keita, Asa V; Söderholm, Johan D.; Rhodes, Jonathan M; Campbell, Barry J.

    2014-01-01

    Soluble fibres (non-starch polysaccharides, NSP) from edible plants but particularly plantain banana (Musa spp.), have been shown in vitro and ex vivo to prevent various enteric pathogens from adhering to, or translocating across, the human intestinal epithelium, a property that we have termed contrabiotic. Here we report that dietary plantain fibre prevents invasion of the chicken intestinal mucosa by Salmonella. In vivo experiments were performed with chicks fed from hatch on a pellet diet ...

  7. Impact de l’opération de cuisson du plantain sur la digestibilité in vitro de l’amidon

    OpenAIRE

    Giraldo Toro, Andrés

    2015-01-01

    Plantain-based foods are widely consumed in southern countries. Plantain is well known for its high resistant starch content. Controlling the digestibility of cooked plantain starch involves managing its physicochemical properties. These vary depending on the cooking conditions and are a consequence of transport processes (energy, water), transformation and reactions. This research work aims to further our understanding of the different processes. To achieve this, the combined effect of tempe...

  8. Changeability of production management systems

    NARCIS (Netherlands)

    Hoogenraad, M. S.; Wortmann, J. C.; Olhager, J; Persson, F

    2007-01-01

    Modem production management systems consist of transaction processing systems and decision enhancement systems. A clear example of two such components are an ERP systems and APS systems. These systems are often standard software systems, and therefore suitable for many different situations. This pap

  9. Changeability of production management systems

    NARCIS (Netherlands)

    Hoogenraad, M. S.; Wortmann, J. C.; Olhager, J; Persson, F

    2007-01-01

    Modem production management systems consist of transaction processing systems and decision enhancement systems. A clear example of two such components are an ERP systems and APS systems. These systems are often standard software systems, and therefore suitable for many different situations. This

  10. Modeling Novo Nordisk Production Systems

    DEFF Research Database (Denmark)

    Miller, Thomas Dedenroth

    1997-01-01

    This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

  11. Strategies for increasing productivity in production systems

    OpenAIRE

    Diego Pacheco; Isaac Pergher; Carlos Fernando Jung; Carla Scwenberg ten Caten

    2014-01-01

    The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey resu...

  12. Approximate Analysis of Production Systems

    NARCIS (Netherlands)

    M.B.M. de Koster (René)

    1988-01-01

    textabstractIn this paper complex production systems are studied where a single product is manufactured and where each production unit stores its output in at most one buffer and receives its input from at most one buffer. The production units and the buffers may be connected nearly arbitrarily. The

  13. Approximate Analysis of Production Systems

    NARCIS (Netherlands)

    M.B.M. de Koster (René)

    1988-01-01

    textabstractIn this paper complex production systems are studied where a single product is manufactured and where each production unit stores its output in at most one buffer and receives its input from at most one buffer. The production units and the buffers may be connected nearly arbitrarily. The

  14. Effects of plantain and corn starches on the mechanical and disintegration properties of paracetamol tablets.

    Science.gov (United States)

    Akin-Ajani, Olufunke D; Itiola, Oludele A; Odeku, Oluwatoyin A

    2005-10-22

    The effects of plantain starch obtained from the unripe fruit of the plant Musa paradisiaca L. (Musaceae) on the mechanical and disintegration properties of paracetamol tablets have been investigated in comparison with the effects of corn starch BP using a 2(3) factorial experimental design. The individual and combined effects of nature of starch binder (N), concentration of starch binder (C), and the relative density of tablet (RD) on the tensile strength (TS), brittle fracture index (BFI), and disintegration time (DT) of the tablets were investigated. The ranking of the individual effects on TS was RD > C > N, on BFI was C > RD > N and on DT was N > C > RD. The ranking for the interaction effects on TS and DT was N-C > N-RD > C-RD, while that on BFI was N-C > C-RD > N-RD. Changing nature of starch from a "low" (plantain starch) to a "high" (corn starch) level, increasing the concentration of starch binding agent from 2.5% to 10.0% wt/wt, and increasing relative density of the tablet from 0.80 to 0.90, led to increase in the values of TS and DT, but a decrease in BFI. Thus, tablets containing plantain starch had lower tensile strength and disintegration time values than those containing corn starch, but showed better ability to reduce the lamination and capping tendency in paracetamol tablet formulation. The interaction between N and C was significantly (P starch used as binding agent in tablet formulations to obtain tablets of desired bond strength and disintegration properties. Furthermore, plantain starch could be useful as an alternative binding agent to cornstarch, especially where faster disintegration is required and the problems of lamination and capping are of particular concern.

  15. Effects of plantain and corn starches on the mechanical and disintegration properties of paracetamol tablets

    OpenAIRE

    Akin-Ajani, Olufunke D.; Itiola, Oludele A.; ODEKU, OLUWATOYIN A.

    2005-01-01

    The effects of plantain starch obtained from the unripe fruit of the plantMusa paradisiaca L. (Musaceae) on the mechanical and disintegration properties of paracetamol tablets have been investigated in comparison with the effects of corn starch BP using a 23 factorial experimental design. The individual and combined effects of nature of starch binder (N), concentration of starch binder (C), and the relative density of tablet (RD) on the tensile strength (TS), brittle fracture index (BFI), and...

  16. Effect of Salinity Stress on Growth Analysis of Isabgul, French Psyllium and Great Plantain

    Directory of Open Access Journals (Sweden)

    A. Rahimi

    2012-08-01

    Full Text Available Growth indices are useful for interpreting plant reaction to environmental factor. Using Growing Degree Days (GDD for estimating the phonological growth stages is more valid instead of calendar time. In order to study effect of salinity on growth analysis in three different plantago species, a greenhouse experiment was conducted in Vali-e-Asr University of Rafsanjan in 2009. The study was carried out factorial experiment based on RCBD design with 4 replications to determine the influence of salinity (9, 15, 21 dS/m and control with distilled water and three plantago species (Isabgul, French psyllium, Great plantain. Polynomial equations with the 88 to 98 distinction coefficient (R2 were known as the best indicator for interpreting of growth indices fluctuation to GDD. In all three species, the highest dry matter accumulation, leaf area, Crop growth rates (CGR were observed in 900-1000 GDD at all salinity levels and in higher GDD, the decreeing trend of dry matter accumulation, leaf area and CGR were observed in all salinity levels. The lowest relative growth rate, crop growth rate, Leaf area ratio, dry matter accumulation were observed in 21 dS/m NaCl salinity. Results also indicated that maximum dry matter accumulation was observed in 800, 900 and 1100 degree day in Isabgul, French psyllium, Great plantain, respectively. No seed harvested from Isabgul and French psyllium in 21 dS/m. Among three species, great plantain could remain the highest leaf area consequently this species produced higher dry matter (0.4 gr per plant and relative growth rate (0.06 g.g-1.10GDD-1 compared to other species. In general, among three species, great plantain was better species from a growth and seed yield point of view in salinity stress.

  17. Cooking Banana Consumption Patterns in the Plantain-growing Area of Southeastern Nigeria

    OpenAIRE

    Tshiunza, M.; Lemchi, J.; Onyeka, U.; Tenkouano, A.

    2001-01-01

    Cooking bananas (Musa spp., ABB genome) were intro-duced into Southeastern Nigeria by the International Institute of Tropical Agriculture (IITA) in the mid-1980s as an interim measure to reduce the incidence of black sigatoka disease (caused by the fungus Mycosphaerel-la fijiensis Morelet) on plantain. However, the people of this region were not familiar with their utilisation methods. To address this lack of the knowledge and thereby sustain cooking banana cultivation, IITA, in collaboration...

  18. Arylsulphatase in the rhizosphere of plantain Musa AAB and its relation with growth, development and pr Arilsulfatasa en la rizosfera de plátano, Musa AAB y relación con crecimiento, desarrollo y produccion

    Directory of Open Access Journals (Sweden)

    Rao Idupulapati M

    2006-09-01

    Full Text Available

    Arylsulphatase in the rhizosphere of plantain Musa AAB and its relation with growth, development and production. In a plantain crop (Musa AAB of the Central coffee growing zone of Colombia, arylsulphatase activity in a Pachic Melanudand Medial Isotermic soil under three agronomic management systems during 18 months was measured. Measurements were done at 6, 12 and 18 months in four depths, 0-5, 5-10, 10-20, 20-30 cm. The highest arylsulphatase activity (60% was found in the first 10 cm, with a decreasing in depth. Statical analysis did not show significant differences among the three plant ages. Arylsulphatase activity was found between 164 µmol g-1 min-1 and 319 µmol g-1 min-1. The lowest activity was found in the rhizosphere of plants with 12 months of age (flowering under chemical management. Arylsulphatase activity showed very significant correlation with Biomass-C and with Mg in soil, number of leaf and the plantain bunch weight.

    Key words: Enzymic activity-arylsulphatase, andisol, Musa ABB

    En la zona central cafetera de Colombia, en un suelo Pachic Melanudands medial isotérmico, se midió la actividad de arilsulfatasa en rizosfera de plátano Musa AAB, en tres sistemas de manejo agronómico (químico o convencional, tradicional y ecológico, cuatro profundidades (0-5, 5-10, 10-20 y 20-30 cm y tres edades de cultivo (6 meses – diferenciación floral, 12 meses – floración, 18 meses - cosecha. La mayor actividad (60% se encontró en los primeros 10 cm., y disminuyó a medida que se profundizó en el perfil del suelo. El análisis estadístico no mostró diferencias significativas entre los tres manejos o entre edades de planta. La actividad de arilsulfatasa se encontró entre 164 µ mol g-1 min-1 y 319 µ

  19. Characterization of Musa sp. fruits and plantain banana ripening stages according to their physicochemical attributes.

    Science.gov (United States)

    Valérie Passo Tsamo, Claudine; Andre, Christelle M; Ritter, Christian; Tomekpe, Kodjo; Ngoh Newilah, Gérard; Rogez, Hervé; Larondelle, Yvan

    2014-08-27

    This study aimed at understanding the contribution of the fruit physicochemical parameters to Musa sp. diversity and plantain ripening stages. A discriminant analysis was first performed on a collection of 35 Musa sp. cultivars, organized in six groups based on the consumption mode (dessert or cooking banana) and the genomic constitution. A principal component analysis reinforced by a logistic regression on plantain cultivars was proposed as an analytical approach to describe the plantain ripening stages. The results of the discriminant analysis showed that edible fraction, peel pH, pulp water content, and pulp total phenolics were among the most contributing attributes for the discrimination of the cultivar groups. With mean values ranging from 65.4 to 247.3 mg of gallic acid equivalents/100 g of fresh weight, the pulp total phenolics strongly differed between interspecific and monospecific cultivars within dessert and nonplantain cooking bananas. The results of the logistic regression revealed that the best models according to fitting parameters involved more than one physicochemical attribute. Interestingly, pulp and peel total phenolic contents contributed in the building up of these models.

  20. From crossbreeding to biotechnology-facilitated improvement of banana and plantain.

    Science.gov (United States)

    Ortiz, Rodomiro; Swennen, Rony

    2014-01-01

    The annual harvest of banana and plantain (Musa spp.) is approximately 145 million tons worldwide. About 85% of this global production comes from small plots and kitchen or backyard gardens from the developing world, and only 15% goes to the export trade. Musa acuminata and Musa balbisiana are the ancestors of several hundreds of parthenocarpic Musa diploid and polyploid cultivars, which show multiple origins through inter- and intra-specific hybridizations from these two wild diploid species. Generating hybrids combining host plant resistance to pathogens and pests, short growth cycles and height, high fruit yield, parthenocarpy, and desired quality from the cultivars remains a challenge for Musa crossbreeding, which started about one century ago in Trinidad. The success of Musa crossbreeding depends on the production of true hybrid seeds in a crop known for its high levels of female sterility, particularly among polyploid cultivars. All banana export cultivars grown today are, however, selections from somatic mutants of the group Cavendish and have a very narrow genetic base, while smallholders in sub-Saharan Africa, tropical Asia and Latin America use some bred-hybrids (mostly cooking types). Musa improvement goals need to shift to address emerging threats because of the changing climate. Innovative cell and molecular biology tools have the potential to enhance the pace and efficiency of genetic improvement in Musa. Micro-propagation has been successful for high throughput of clean planting materials while in vitro seed germination assists in obtaining seedlings after inter-specific and across ploidy hybridization. Flow cytometry protocols are used for checking ploidy among genebank accessions and breeding materials. DNA markers, the genetic maps based on them, and the recent sequencing of the banana genome offer means for gaining more insights in the genetics of the crops and to identifying genes that could lead to accelerating Musa betterment. Likewise, DNA

  1. Processed Products Database System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection of annual data on processed seafood products. The Division provides authoritative advice, coordination and guidance on matters related to the collection,...

  2. Production Systems and Supplier Selection

    DEFF Research Database (Denmark)

    Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

    2016-01-01

    Purpose: This paper presents a combined multi-phase supplier selection model. The process repeatedly revisits the criteria and sourcing decision as the development process continues. This enables a structured adoption of product and production system innovation from strategic suppliers, where...... strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...... the literature on working with strategic suppliers. Specifically, we explicitly articulate the previously unreported issue of whether a supplier chosen for its innovation capabilities at the start of the new product development process will also be the most appropriate supplier during the production system...

  3. Dietary supplementation with soluble plantain non-starch polysaccharides inhibits intestinal invasion of Salmonella Typhimurium in the chicken.

    Directory of Open Access Journals (Sweden)

    Bryony N Parsons

    Full Text Available Soluble fibres (non-starch polysaccharides, NSP from edible plants but particularly plantain banana (Musa spp., have been shown in vitro and ex vivo to prevent various enteric pathogens from adhering to, or translocating across, the human intestinal epithelium, a property that we have termed contrabiotic. Here we report that dietary plantain fibre prevents invasion of the chicken intestinal mucosa by Salmonella. In vivo experiments were performed with chicks fed from hatch on a pellet diet containing soluble plantain NSP (0 to 200 mg/d and orally infected with S.Typhimurium 4/74 at 8 d of age. Birds were sacrificed 3, 6 and 10 d post-infection. Bacteria were enumerated from liver, spleen and caecal contents. In vitro studies were performed using chicken caecal crypts and porcine intestinal epithelial cells infected with Salmonella enterica serovars following pre-treatment separately with soluble plantain NSP and acidic or neutral polysaccharide fractions of plantain NSP, each compared with saline vehicle. Bacterial adherence and invasion were assessed by gentamicin protection assay. In vivo dietary supplementation with plantain NSP 50 mg/d reduced invasion by S.Typhimurium, as reflected by viable bacterial counts from splenic tissue, by 98.9% (95% CI, 98.1-99.7; P<0.0001. In vitro studies confirmed that plantain NSP (5-10 mg/ml inhibited adhesion of S.Typhimurium 4/74 to a porcine epithelial cell-line (73% mean inhibition (95% CI, 64-81; P<0.001 and to primary chick caecal crypts (82% mean inhibition (95% CI, 75-90; P<0.001. Adherence inhibition was shown to be mediated via an effect on the epithelial cells and Ussing chamber experiments with ex-vivo human ileal mucosa showed that this effect was associated with increased short circuit current but no change in electrical resistance. The inhibitory activity of plantain NSP lay mainly within the acidic/pectic (homogalacturonan-rich component. Supplementation of chick feed with plantain NSP was

  4. Dietary supplementation with soluble plantain non-starch polysaccharides inhibits intestinal invasion of Salmonella Typhimurium in the chicken.

    Science.gov (United States)

    Parsons, Bryony N; Wigley, Paul; Simpson, Hannah L; Williams, Jonathan M; Humphrey, Suzie; Salisbury, Anne-Marie; Watson, Alastair J M; Fry, Stephen C; O'Brien, David; Roberts, Carol L; O'Kennedy, Niamh; Keita, Asa V; Söderholm, Johan D; Rhodes, Jonathan M; Campbell, Barry J

    2014-01-01

    Soluble fibres (non-starch polysaccharides, NSP) from edible plants but particularly plantain banana (Musa spp.), have been shown in vitro and ex vivo to prevent various enteric pathogens from adhering to, or translocating across, the human intestinal epithelium, a property that we have termed contrabiotic. Here we report that dietary plantain fibre prevents invasion of the chicken intestinal mucosa by Salmonella. In vivo experiments were performed with chicks fed from hatch on a pellet diet containing soluble plantain NSP (0 to 200 mg/d) and orally infected with S.Typhimurium 4/74 at 8 d of age. Birds were sacrificed 3, 6 and 10 d post-infection. Bacteria were enumerated from liver, spleen and caecal contents. In vitro studies were performed using chicken caecal crypts and porcine intestinal epithelial cells infected with Salmonella enterica serovars following pre-treatment separately with soluble plantain NSP and acidic or neutral polysaccharide fractions of plantain NSP, each compared with saline vehicle. Bacterial adherence and invasion were assessed by gentamicin protection assay. In vivo dietary supplementation with plantain NSP 50 mg/d reduced invasion by S.Typhimurium, as reflected by viable bacterial counts from splenic tissue, by 98.9% (95% CI, 98.1-99.7; P<0.0001). In vitro studies confirmed that plantain NSP (5-10 mg/ml) inhibited adhesion of S.Typhimurium 4/74 to a porcine epithelial cell-line (73% mean inhibition (95% CI, 64-81); P<0.001) and to primary chick caecal crypts (82% mean inhibition (95% CI, 75-90); P<0.001). Adherence inhibition was shown to be mediated via an effect on the epithelial cells and Ussing chamber experiments with ex-vivo human ileal mucosa showed that this effect was associated with increased short circuit current but no change in electrical resistance. The inhibitory activity of plantain NSP lay mainly within the acidic/pectic (homogalacturonan-rich) component. Supplementation of chick feed with plantain NSP was well

  5. GLOBAL PRODUCTION SYSTEM

    Directory of Open Access Journals (Sweden)

    Dumitru FILIPEANU

    2016-07-01

    Full Text Available The most significant transformations that globalization produces occur in production. Since the '60s, a new division of labor has made its presence felt in the world, arising from the "de-industrialization" of the developed and transfer production capacity of resource-intensive industries and pollutants from these countries to the developing world. "Dislocation" industry had the interim foreign direct investment made in the new industrialized countries, the latter becoming, in turn, sources of direct foreign investment, taking its capital in other countries in developing handsets. Currently, FDI destination is no longer a priority in developing countries, yet they are increasingly leaning towards the developed countries, due to the attractiveness offered by their economies.

  6. Village poultry production system

    OpenAIRE

    Wondmeneh, E.; Waaij, van der, Liesbeth; Udo, H.M.J.; Tadelle, D.; van Arendonk,

    2016-01-01

    This study identified perception of poultry farmers’ on impact of interventions in village poultry production and quantified the impacts of interventions on flock and economic performance using modelling. A structured questionnaire was used to collect data on perceptions of poultry keeping and performances from 240 randomly selected households in two districts of Ethiopia. Crop was the major source of income, and poultry generated supplementary income. Farmers perceived that demand and price ...

  7. Compressional characteristics of native and pregelatinized forms of sorghum, plantain, and corn starches and the mechanical properties of their tablets.

    Science.gov (United States)

    Alebiowu, G; Itiola, O A

    2002-07-01

    A study was made of the compressional characteristics of native and pregelatinized forms of sorghum, plantain, and corn starches and the mechanical properties of their tablets. Compressional characteristics were analyzed using density measurements and the Heckel and Kawakita plots. Pregelatinized starches exhibited more densification than native starches during die filling and at low pressures. The ranking for the mean yield pressure (Py) values for the starches was plantain starches having lower values than the native starches. The ranking for the values of another pressure term, Pk--an inverse measure of plasticity, was corn plantain starches having the lower values. For the tablets, the ranking for values of tensile strength (T) was corn > plantain > sorghum, while the ranking for the brittle fracture index (BFI) was plantain > corn > sorghum. Tablets made from pregelatinized starches had lower T and BFI values than those made from native starches. The results suggest that pregelatinization of the starches facilitated faster onset of plastic deformation but reduced the amount of plastic deformation which occurred during the compression process.

  8. Starch gelatinization and in vitro digestibility behaviour after heat treatment: Comparison between plantain paste and piece of pulp.

    Science.gov (United States)

    Giraldo Toro, A; Gibert, O; Briffaz, A; Ricci, J; Dufour, D; Tran, T; Bohuon, P

    2016-08-20

    Over the 65-100°C range and at a water content of 1.6kgkg(-1)db, a comparison was conducted between plantain paste (dispersion made of flour and water) and pulp pieces after cooking to evaluate their respective degree of starch gelatinization (α) and in vitro digestibility. Below 76°C and at 100°C, the gelatinization behaviour of starch into pulp pieces and paste was similar, whereas at 85°C a significant mean relative difference was observed in between. For α in the 0-1 range, pieces of plantain pulp exhibited a lower rapidly digestible starch fraction (30%) and a higher resistant starch fraction (33%) than the flour paste, suggesting some structural effects. Both Weibull and exponential models showed a good fit for α over temperature range and starch digestibility fractions over α. Although no explicit relationship was established between the intact pulp structure and grinded flour state of plantain, the evaluation of the degree of starch gelatinization and digestibility of a plantain flour paste, could be used to predict the gelatinization and digestibility behaviour of plantain starch in entire pieces of pulp.

  9. Assessment and geomodelling of site effects along the eastern Enriquillo Plantain Garden Fault Zone in Haiti

    Science.gov (United States)

    Ulysse, S. M. J.; Havenith, H. B.; Boisson, D.

    2016-12-01

    The last 2010 earthquake which hits Haiti killed more than 230,000 people, caused nearly 300,000 wounded and material damage of more than 8 billion dollars. This event whose epicenter was located in Léogâne, to the west of Port-au-Prince was triggered by a north dipping fault, the "Léogâne fault", near and to the north of the Enriquillo Plantain Garden Fault (EPGF), a very hazardous fault system crossing the southern part of the country. Several large international projects were carried out in Port-au-Prince and Léogâne. Our work which is done in the frame of a Belgian-Haitian collaboration project rather focused on an eastern region of Port-au-Prince, Fonds-Parisien and a site called Gros-Morne in the southeast of the city. The Fonds-Parisien area is crossed by the eastern part of EPGF. The north of the area is bordered by a sedimentary basin hosting the Azuei Lake and to the south it is bounded by the foothills of a mountain range, the "Massif de la Selle". The Gros-Morne zone is also situated nearby the EPGF and is limited to the north by the Cul-de-Sac plain, a sedimentary basin and to the south, by the foothills of the "Massif de la Selle". We performed local geophysical investigations to assess site effects 1) in areas relatively far from the epicenter, not intensively hit by the 2010 event, to see if they may fit for future construction projects, 2) on a hill in the southeastern part of Port-au-Prince that was affected by important destruction and secondary effects. Multichannel Analysis of Surface Waves (MASW), Horizontal to Vertical Spectral Ratio (HVSR) measurements as well as some Electrical Resistivity Tomography (ERT) were applied. The results were integrated to outline areas that are affected by site amplification and then combined into a 3D geomodel. For Fonds-Parisien, HVSR recordings show sharp and double amplitude peaks for sites located in the northern sedimentary basin along the shores of Azuei Lake, and consequently denotes a high

  10. Production control system specified quality sausage products

    Directory of Open Access Journals (Sweden)

    A. V. Tokarev

    2016-01-01

    Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

  11. Venezuela fruit production/Consideraciones sobre la produccion de frutas en Venezuela

    National Research Council Canada - National Science Library

    Aular, Jesus; Casares, Maria

    2011-01-01

    .... The main fruit crops are: plantain, banana, orange, and pineapple. The production areas range from arid lowlands, where grapes and pineapples are obtained, and humid highlands where there are peaches and strawberries...

  12. The system Around the Product

    DEFF Research Database (Denmark)

    Morelli, Nicola

          The design discipline has traditionally focused on products physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... and methods to handle immaterial aspects such as time sequences, actors? role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ?operative paradigm? to operate in a systemic context. An operative paradigm consists of a set of tools...

  13. Effect of Unripe Plantain (Musa paradisiaca) and Ginger (Zingiber officinale) on Renal Dysfunction in Streptozotocin-Induced Diabetic Rats.

    Science.gov (United States)

    Iroaganachi, Mercy; Eleazu, Chinedum; Okafor, Polycarp

    2015-03-20

    Although unripe plantain (Musa paradisiaca) and ginger (Zingiber officinale) are used as single plants to manage diabetes mellitus in Nigeria, the possibility of combining them in a typical diabetic diet and the glycemic response elicited as a result of such combination has not been investigated. To determine the effect of unripe plantain and ginger on serum total proteins, albumin, creatinine and urea levels of streptozotocin induced diabetic rats. Twenty four male albino rats were used and were divided into 4 groups of 6 rats each. Group 1 (non-diabetic) received standard rat feeds; Group 2 (diabetic) received standard rat feeds; Group 3 received unripe plantain pellets and Group 4 received unripe plantain+ginger pellets. There were significant increases (P=0.045) of both serum urea and creatinine, but significant decreases (P=0.045) of both serum total protein and albumin levels, in Group 2 rats compared with Group 1. There were significant decreases (P=0.033) of both serum urea and creatinine levels of Group 3 and 4 rats compared with Group 2. In addition, there were significant increases of both serum total protein and albumin levels (P=0.033) in Group 3 rats compared with Group 2, but the comparison of serum total protein and albumin levels between Group 4 and Group 2 did not reach the significant level (P=0.056 and P=0.065 for serum total protein and albumin levels, respectively. Combination of unripe plantain and ginger at the ratio used in the management of renal dysfunction in diabetics was not very effective compared with unripe plantain alone.

  14. Biology, etiology, and control of virus diseases of banana and plantain.

    Science.gov (United States)

    Kumar, P Lava; Selvarajan, Ramasamy; Iskra-Caruana, Marie-Line; Chabannes, Matthieu; Hanna, Rachid

    2015-01-01

    Banana and plantain (Musa spp.), produced in 10.3 million ha in the tropics, are among the world's top 10 food crops. They are vegetatively propagated using suckers or tissue culture plants and grown almost as perennial plantations. These are prone to the accumulation of pests and pathogens, especially viruses which contribute to yield reduction and are also barriers to the international exchange of germplasm. The most economically important viruses of banana and plantain are Banana bunchy top virus (BBTV), a complex of banana streak viruses (BSVs) and Banana bract mosaic virus (BBrMV). BBTV is known to cause the most serious economic losses in the "Old World," contributing to a yield reduction of up to 100% and responsible for a dramatic reduction in cropping area. The BSVs exist as episomal and endogenous forms are known to be worldwide in distribution. In India and the Philippines, BBrMV is known to be economically important but recently the virus was discovered in Colombia and Costa Rica, thus signaling its spread into the "New World." Banana and plantain are also known to be susceptible to five other viruses of minor significance, such as Abaca mosaic virus, Abaca bunchy top virus, Banana mild mosaic virus, Banana virus X, and Cucumber mosaic virus. Studies over the past 100 years have contributed to important knowledge on disease biology, distribution, and spread. Research during the last 25 years have led to a better understanding of the virus-vector-host interactions, virus diversity, disease etiology, and epidemiology. In addition, new diagnostic tools were developed which were used for surveillance and the certification of planting material. Due to a lack of durable host resistance in the Musa spp., phytosanitary measures and the use of virus-free planting material are the major methods of virus control. The state of knowledge on BBTV, BBrMV, and BSVs, and other minor viruses, disease spread, and control are summarized in this review.

  15. Effects of pigeon pea and plantain starches on the compressional, mechanical, and disintegration properties of paracetamol tablets.

    Science.gov (United States)

    Dare, Kunle; Akin-Ajani, Dorothy O; Odeku, Oluwatoyin A; Itiola, Oludele A; Odusote, Omotunde M

    2006-03-01

    A study has been made of the effects of pigeon pea starch obtained from the plant Cajanus cajan (L) Millisp. (family Fabaceae) and plantain starch obtained from the unripe fruit of Musa paradisiaca L. (family Musaceae) on the compressional, mechanical, and disintegration properties of paracetamol tablets in comparison with official corn starch BP. Analysis of compressional properties was done by using density measurements, and the Heckel and Kawakita equations, whereas the mechanical properties of the tablets were evaluated by using tensile strength (T--a measure of bond strength) and brittle fracture index (BFI--a measure of lamination tendency). The ranking for the mean yield pressure, P(y), for the formulations containing the different starches was generally corn plantain starch while the ranking for P(k), an inverse measure of the amount of plasticity, was pigeon pea plantain starch, which indicated that formulations containing corn starch generally exhibited the fastest onset of plastic deformation, whereas those formulations containing pigeon pea starch exhibited the highest amount of plastic deformation during tableting. The tensile strength of the tablets increased with increase in concentration of the starches while the Brittle Fracture Index decreased. The ranking for T was pigeon pea > plantain > corn starch while the ranking for BFI was corn > plantain > pigeon pea starch. The bonding capacity of the formulations was in general agreement with the tensile strength results. The disintegration time (DT) of the formulation increased with concentration of plantain and corn starches but decreased with concentration of pigeon pea starch. The general ranking of DT values was plantain starch. Notably, formulations containing pigeon pea starch exhibited the highest bond strength and lowest brittleness, suggesting the usefulness of pigeon pea starch in producing strong tablets with minimal lamination tendency. Plantain starch, on the other hand, would be more

  16. [Study of a new group of bioregulators isolated from the greater plantain (Plantago major L.)].

    Science.gov (United States)

    Krasnov, M S; Iamskova, V P; Margasiuk, D V; Kulikova, O G; Il'ina, A P; Rybakova, E Iu; Iamslov, I A

    2011-01-01

    Proteins with physicochemical properties and biological activity similar to those of membrano-tropic homeostatic tissue-specific bioregulators that had been found earlier in various animal tissues were discovered in leaves of the common plantain (Plantago major L.). To study the specific activity of these plant proteins, we developed an experimental model for organotypic roller cultivation of newt (Pleurodeles waltl) skin tissue in vitro. We showed that the plant proteins of interest exert the wound-healing effect, which is characteristic of this plant, on the skin of vertebrates both in vitro and in vivo.

  17. A new image of plantain diversity assessed by SSR, AFLP and MSAP markers.

    Science.gov (United States)

    Noyer, J L; Causse, S; Tomekpe, K; Bouet, A; Baurens, F C

    2005-05-01

    Using both SSR and AFLP markers, the genetic diversity of 30 plantains constituting a representative sample of the phenotypic diversity was assessed. The results confirmed a very narrow genetic base of this cultivar group. SSR and AFLP data support the hypothesis that these cultivars may have arisen from vegetative multiplication of a single seed. MSAP were used to survey cytosine methylation status at CCGG sites in order to obtain an alternative source of diversity data. A higher degree of polymorphism was revealed allowing the classification of the samples into three clusters. No correlation was observed between the phenotypic classification and methylation diversity. Implications for breeding programs are discussed.

  18. Composite wheat-plantain starch salted noodles. preparation, proximal composition and in vitro starch digestibility

    OpenAIRE

    Rodolfo Rendón-Villalobos; Perla Osorio-Díaz; Edith Agama-Acevedo; Juscelino Tovar; Luis A. Bello-Pérez

    2008-01-01

    Salted noodles were prepared with different contents of wheat grits and plantain starch (PS). The blends were hydrated with 2% NaCl (w/v), homogenized, and the resulting doughs were sheeted through a pasta machine, cut into strips ~30cm in length, cooked, and their composition and in vitro starch digestibility was assessed. Moisture (6.43-7.60%) and ash contents (2.08-3.12%) increased by the addition of PS. Fat level decreased from 0.41 to 0.31% as the substitution of wheat grits increased. R...

  19. Effect of Unripe Plantain (Musa paradisiaca) and Ginger (Zingiber officinale) on Blood Glucose, Body Weight and Feed Intake of Streptozotocin-induced Diabetic Rats

    Science.gov (United States)

    M, Iroaganachi; C.O, Eleazu; P.N, Okafor; N, Nwaohu

    2015-01-01

    Objective: To determine the effect of unripe plantain (Musa paradisiaca) and ginger (Zingiber officinale) on blood glucose (BG), feed intake (FI) and weight of streptozotocin (STZ) induced diabetic rats. Methods: Twenty four male albino rats were used and were divided into 4 groups of 6 rats each. Group 1 (non-diabetic) and Group 2 (diabetic) received standard rat feed; Group 3 received unripe plantain incorporated feed (810 /kg body weight) and Group 4 received unripe plantain+ginger incorporated feed (710:100 g/kg body weight). The weights and FI of the rats were measured daily throughout the experimentation. Results: Groups 3 and 4 rats had 159.52% and 71.83% decreases in BG but 24.91% and 35.32% decreases in weights compared with groups 1 and 2 rats that had 2.09% and 22.94% increases in BG with 13.42% increase and 45.36% decrease in weights respectively. The FI of the experimental rats did not differ significantly from each other (P>0.05) at the end of experimentation. The standard rat feed contained higher amounts of Ca but lower amounts of Mg and Fe compared with the unripe plantain and unripe plantain+ginger incorporated feeds. Conclusion: Combination of unripe plantain and ginger at the dose used in the management of diabetes was not very effective compared with unripe plantain alone. PMID:25674161

  20. Genetic variability among 18 cultivars of cooking bananas and plantains by RAPD and ISSR markers

    Directory of Open Access Journals (Sweden)

    YUYU SURYASARI POERBA

    2010-07-01

    Full Text Available Poerba YS, Ahmad F (2010 Genetic variability among 18 cultivars of cooking bananas and plantains by RAPD and ISSR markers. Biodiversitas 11: 118-123. This study was done to assess the molecular diversity of 36 accessions (18 cultivars of the plantain and cooking bananas (Musa acuminata x M. balbisiana, AAB, ABB subgroups based on Random amplified polymorphic DNA (RAPD and and Inter Simple Sequence Repeats (ISSR markers and to determine genetic relationships in the bananas. RAPD and ISSR fingerprinting of these banana varieties was carried out by five primers of RAPDs and two primers of ISSRs. RAPD primers produced 63 amplified fragments varying from 250 to 2500 bp in size. 96.82% of the amplification bands were polymorphic. ISSR primers produced 26 amplified fragments varying from 350 bp to 2000 bp in size. The results showed that 92.86% of the amplification bands were polymorphic. The range of genetic distance of 18 cultivars was from 0.06-0.67.

  1. Digestibility prediction of cooked plantain flour as a function of water content and temperature.

    Science.gov (United States)

    Giraldo Toro, A; Gibert, O; Ricci, J; Dufour, D; Mestres, C; Bohuon, P

    2015-03-15

    The effect of temperature (T=55-120°C) and water content (X1=1.4-2.0 kg kg(-1) dry basis) on the gelatinization and digestibility of plantain flour (Dominico Harton genotype) were investigated. The degree of plantain starch gelatinization (α) was measured by DSC and modelled as a function of T and X1, using the Weibull model. Rapidly digestible starch (RDS) and resistant starch (RS) fractions were evaluated for different α values. An appropriate dimensionless variable was introduced to the analyzed and modelled RDS and RS as a function of α. Starch gelatinization begins at a temperature above 59.6 ± 0.5°C and α is strongly dependent on T in non-limiting water conditions. The combined effects of T and X1 on the RDS and RS can be explained by α. We demonstrate that various heat treatments and water contents lead to the same α, with the same RDS and RS values.

  2. The system around the product

    DEFF Research Database (Denmark)

    Morelli, Nicola

    2006-01-01

    The design discipline has traditionally focused on products’ physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... and methods to handle immaterial aspects such as time sequences, actors’ role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...... context. This paper describes a curricular activity focused on the definition of methodologies for designing in a systemic context. using examples from students’ projects. For a semester students had to focus on a project of a PSS, borrowing and re-adapting methods from other disciplines with the purpose...

  3. HOSPEDANTES DE Ralstonia solanacearum EN PLANTACIONES DE BANANO Y PLÁTANO EN COLOMBIA HOSTS OF Ralstonia solanacearum ON BANANA AND PLANTAIN PLANTATIONS IN COLOMBIA

    Directory of Open Access Journals (Sweden)

    Mónica Obregón Barrios

    2008-12-01

    Full Text Available La enfermedad del “Moko” causada por la bacteria Ralstonia solanacearum Raza 2, es uno de los problemas fitopatológicos más limitantes en la producción de plátano y banano en las regiones productoras. La bacteria cuenta con un amplio rango de hospederos, cerca de 50 familias botánicas y más de 200 especies. En plantaciones de banano y plátano de Colombia la bacteria se asocia con arvenses que se encuentran en altas poblaciones contribuyendo a su sobrevivencia y permanencia en el campo. Para la determinación de los hospedantes silvestres sintomáticos y asintomáticos en áreas afectadas en plantaciones de plátano y banano del Valle del Cauca, Quindío y Urabá, se realizó la colección de arvenses frecuentes en los focos afectados y el aislamiento en medio semiselectivo SMSA de la bacteria. 124 aislamientos fueron sometidos a pruebas bioquímicas y de patogenicidad en plantas de banano y plátano bajo condiciones similares a las de Urabá y Valle del Cauca. En las pruebas de patogenicidad 67 de 124 aislamientos evaluados fueron positivos, reproduciendo los síntomas típicos de la enfermedad como flacidez, clorosis, amarillamiento de hojas y muerte de las plantas. Se encontraron nuevas especies de arvenses hospedantes de la bacteria que corresponden a Chaptalia nutans, Seneciodes cinerea, Tripogandra glandulosa, Plenax hirtus, Peperomia pellucida, Tripogandra cumanenses, Desmodium sp, y Cissus sicyoides esta última perteneciente a la familia Vitaceae, la cual corresponde al registro de una nueva familia como hospedera. Se confirmó la presencia de la bacteria en hospedantes silvestres previamente mencionados.The moko disease caused by the bacterium Ralstonia solanacearum race 2, is one of the most limiting phytosanitary problem to deal with in plantain and banana production in Colombia . The bacterium has a wide host range, nearly 50 botanical families and over two hundred species. In plantain and banana plantations in Colombia

  4. Cultivable bacteria populations associated with leaves of banana and plantain plants and their antagonistic activity against Mycosphaerella fijiensis.

    Science.gov (United States)

    Ceballos, Isabel; Mosquera, Sandra; Angulo, Mónica; Mira, John J; Argel, Luz Edith; Uribe-Velez, Daniel; Romero-Tabarez, Magally; Orduz-Peralta, Sergio; Villegas, Valeska

    2012-10-01

    Mycosphaerella fijiensis is the etiological agent of Black Sigatoka, a fungal disease that affects production of banana and plantain crops in tropical regions. The sizes of cultivable epiphytic and endophytic bacterial populations, aerobic endospore forming bacteria (AEFB), and antagonist bacteria against M. fijiensis isolated from three Musa spp. cultivars from Urabá (Colombia) were studied, in order to find a suitable screening strategy to isolate antagonistic bacteria. Most of the variability found in the epiphytic and endophytic bacterial community sizes among fruit trees was explained by the cultivar differences. We found population sizes ranging from 1.25 × 10(3) to 9.64 × 10(5) CFU/g of fresh leaf and found that 44 % of total cultivable bacteria belong to the AEFB group. We isolated 648 AEFB from three different cultivars and assessed their antagonistic activity against M. fijiensis using the cell-free supernatant obtained from bacterial liquid cultures in three different in vitro assays. Five percent of those bacteria showed higher percent inhibition than the positive control Bacillus subtilis UA321 has (percent inhibition = 84 ± 5) in the screening phase. Therefore, they were selected as antagonistic bacteria against the pathogen. The strains with the highest percentage of antagonism were found in older leaves for the three cultivars, given support to recommend this group of leaves for future samplings. Some of these isolated bacteria affected the mycelium and ascospores morphology of the fungus. They also presented in vitro characteristics related to a successful colonization of the phylloplane such as indolic compounds, surfactant production, and biofilm formation, which makes them possible, potential candidates as biological control agents.

  5. Life history data of the rosy apple aphid Dysaphis plantaginea (Pass.) (Homopt., Aphididae) on plantain and as migrant to apple

    NARCIS (Netherlands)

    Blommers, L.H.M.; Helsen, H.H.M.; Vaal, F.W.N.M.

    2004-01-01

    The rosy apple aphid Dysaphis plantaginea (Passerini) is a key pest in western European apple orchards; the economic damage threshold is so low that outbreaks cannot be forecasted. A mass rearing of the species on plantain (Plantago lanceolata L.) was initiated, with the aim to infest apple trees wi

  6. The ATLAS Production System Evolution

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration

    2017-01-01

    The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS-specific workflows, across more than a hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based upon many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kinds of computational resources, such as GRID, clouds, supercomputers and volunteer computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resource utilization is one of the major features of the system. The Production System has a sophisticated job fault recovery mechanism, which efficiently allows running multi-terabyte tasks without human intervention. We have implemented new features which allow automatic task submission and chaining of differe...

  7. The system around the product

    DEFF Research Database (Denmark)

    Morelli, Nicola

    2006-01-01

    context. This paper describes a curricular activity focused on the definition of methodologies for designing in a systemic context. using examples from students’ projects. For a semester students had to focus on a project of a PSS, borrowing and re-adapting methods from other disciplines with the purpose......The design discipline has traditionally focused on products’ physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...

  8. Compartmentalisation in aquaculture production systems.

    Science.gov (United States)

    Zepeda, C; Jones, J B; Zagmutt, F J

    2008-04-01

    Compartmentalisation is a new tool for disease management within a country. In aquaculture, the successful application of compartmentalisation is largely dependent on the system of production and the epidemiology of the disease(s) for which the compartment is being defined. Therefore, compartmentalisation may not be universally applicable across all systems and diseases. The paper examines the implementation of the concept, providing examples of specific industries, and discusses the application of hazard analysis and critical control points (HACCP) to the biosecurity of the system. The role of compartmentalisation in the management of aquaculture disease emergencies is also discussed.

  9. Alert Systems for production Plants

    DEFF Research Database (Denmark)

    Nielsen, Thomas Dyhre; Jensen, Finn Verner

    2005-01-01

    We present a new methodology for detecting faults and abnormal behavior in production plants. The methodology stems from a joint project with a Danish energy consortium. During the course of the project we encountered several problems that we believe are common for projects of this type. Most...... system operation, i.e., it does not rely on information about the possible faults. We illustrate the proposed method using real-world data from a coal driven power plant as well as simulated data from an oil production facility....

  10. An Overview of Production Systems

    Science.gov (United States)

    1975-10-01

    ppear to be uawly recurrent thaws. This peper is e- stt4 to Provide 1an 0102124F21 -Ad Overview of those themes, as well as a c~ncept~Aal frmework...illustrate some of the foregoing notions. The production system, called PS.ONE, is assumed for thils example to contain two productions, PD I and PD2...having one section of code call another explicitly, but rather use an indirect approach in which each piece of code (i.e. each rule) leaves behind the

  11. Productivity raising approaches in the logistic production system

    Directory of Open Access Journals (Sweden)

    Miroslav Rakyta

    2001-01-01

    Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

  12. Ameliorative potentials of cocoyam (Colocasia esculenta L. and unripe plantain (Musa paradisiacal L. on renal and liver growth in streptozotocin induced diabetic rats

    Directory of Open Access Journals (Sweden)

    CO Eleazu

    2013-01-01

    Conclusions: The use of cocoyam and unripe plantain flours in the dietary management of diabetes mellitus could be a breakthrough in the search for plants that could prevent the development of diabetic nephropathy.

  13. Solar based hydrogen production systems

    CERN Document Server

    Dincer, Ibrahim

    2013-01-01

    This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

  14. Plantain starch granules morphology, crystallinity, structure transition, and size evolution upon acid hydrolysis.

    Science.gov (United States)

    Hernández-Jaimes, C; Bello-Pérez, L A; Vernon-Carter, E J; Alvarez-Ramirez, J

    2013-06-05

    Plantain native starch was hydrolysed with sulphuric acid for twenty days. Hydrolysis kinetics was described by a logistic function, with a zero-order rate during the first seven days, followed by a slower kinetics dynamics at longer times. X-ray diffraction results revealed a that gradual increase in crystallinity occurred during the first seven days, followed by a decrease to values similar to those found in the native starch. Differential scanning calorimetry analysis suggested a sharp structure transition by the seventh day probably due to a molecular rearrangement of the starch blocklets and inhomogeneous erosion of the amorphous regions and semi crystalline lamellae. Scanning electron micrographs showed that starch granules morphology was continually degraded from an initial oval-like shape to irregular shapes due to aggregation effects. Granule size distribution broadened as hydrolysis time proceeded probably due to fragmentation and agglomeration phenomena of the hydrolysed starch granules.

  15. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    Ken L. Smith; Marc E. Leveque

    2005-05-31

    The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.

  16. Sterile Product Packaging and Delivery Systems.

    Science.gov (United States)

    Akers, Michael J

    2015-01-01

    Both conventional and more advanced product container and delivery systems are the focus of this brief article. Six different product container systems will be discussed, plus advances in primary packaging for special delivery systems and needle technology.

  17. Greenhouse production systems for people

    NARCIS (Netherlands)

    Giacomelli, G.A.; Sase, S.; Cramer, R.; Hoogeboom, J.; McKenzie, A.; Parbst, K.; Sacrascia-Mugnozza, G.; Selina, P.; Sharp, D.A.; Voogt, J.O.; Weel, van P.A.; Mears, D.

    2012-01-01

    Environmentally sound greenhouse production requires that: demand for market products is understood; greenhouse design addresses the climate circum-stances; input resources are available and consumed efficiently, and; there must be a reasonable balance of production products to the environmental

  18. Input management of production systems.

    Science.gov (United States)

    Odum, E P

    1989-01-13

    Nonpoint sources of pollution, which are largely responsible for stressing regional and global life-supporting atmosphere, soil, and water, can only be reduced (and ultimately controlled) by input management that involves increasing the efficiency of production systems and reducing the inputs of environmentally damaging materials. Input management requires a major change, an about-face, in the approach to management of agriculture, power plants, and industries because the focus is on waste reduction and recycling rather than on waste disposal. For large-scale ecosystem-level situations a top-down hierarchical approach is suggested and illustrated by recent research in agroecology and landscape ecology.

  19. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Smith; M. E. Leveque

    2004-09-30

    This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

  20. EVALUASI NILAI GIZI TEPUNG PRA-MASAK PISANG TANDUK DAN PISANG RAJA NANGKA [Nutritional Evaluation of Pre-cooked “Tanduk” and “Raja Nangka” Plantain flour

    Directory of Open Access Journals (Sweden)

    Rosida*

    2011-12-01

    Full Text Available This research dealt with the nutritional evaluation of pre-cooked plantain flour in experimental Wistar rats to evaluate physical and chemical properties of the digesta of rats as well as glucose and cholesterol content of their blood. Pre-cooked plantain flour was made of 2 types of plantain, Tanduk plantain (Musa corniculata and Raja Nangka plantain (Musa paradisiacalLinn which have been heated and cooled under 3 conditions (boiling-cooling, steaming-cooling, and baking-cooling, prior to drying and milling. It was found that both pre-cooked plantain flours have high resistant starch content (6.38-11.40%. Nutritional evaluation of rats for 20 days treatment revealed that pre-cooked plantain flour diets have no effect on the volume, weight, water content, and pH of the digesta and glucose content of the blood serum. But these diets increase the concentration of acetic acid, propionic acid and butyric acid of the digesta and decrease cholesterol content of the blood serum, especially Tanduk plantain pre-cooked flour made from Tanduk plantain after boiling and cooling, hence it has good effects on the colonic microbiota.

  1. Genetic transformation via Agrobacterium tumefaciens in embryogenic cell suspensions of the plantain hybrid cultivar FHIA 21 (AAAB

    Directory of Open Access Journals (Sweden)

    Boris Chong

    2002-01-01

    Full Text Available The genetic improvement of plantain and banana is of great importance for its level of consumption on a world-wide scale. Genetic transformation constitutes one alternative for genetic improvement and has complemented traditional techniques. In this work some parameters of genetic transformation of plantain were studied by means of transient expression of â-glucoronidase in the hybrid cultivar FHIA-21(AAAB by Agrobacterium tumefaciens. A study with the β-Agrobacterium tumefaciens strains AT-2260 and EHA-105, both with the plasmid pCAMBIA-3301 was done. A comparison between the time of infection and time of co-culture was studied. The strain of better behavior was EHA-105. In the study of the time of infection and co-culture, the best combination resulted to be the one with two hours of infection and six days of co-culture. Key words: At-2260, EHA-105, β-glucoronidase, Musa

  2. Fermentation by amylolytic lactic acid bacteria and consequences for starch digestibility of plantain, breadfruit, and sweet potato flours

    OpenAIRE

    Haydersah, J.; Chevallier, I.; Rochette, Isabelle; Mouquet Rivier, Claire; Picq, Christian; Marianne Pépin, T.; Icard-Vernière, Christèle; Guyot, Jean-Pierre

    2012-01-01

    The potential of tropical starchy plants such as plantain (Musa paradisiaca), breadfruit (Artocarpus communis), and sweet potato (Ipomoea batatas) for the development of new fermented foods was investigated by exploiting the capacity of some lactic acid bacteria to hydrolyze starch. The amylolytic lactic acid bacteria (ALAB) Lactobacillus plantarum A6 and Lactobacillus fermentum Ogi E1 were able to change the consistency of thick sticky gelatinized slurries of these starchy fruits and tubers ...

  3. Impact of Poultry Manure on Growth Behaviour, Black Sigatoka Disease Response and Yield Attributes of Two Plantain (Musa spp. AAB Genotypes

    Directory of Open Access Journals (Sweden)

    Aba, SC.

    2011-01-01

    Full Text Available La baisse de rendement en culture de plantain est un phénomène fréquent après quelques cycles de production; elle est due à de faibles niveaux de matière organique du sol et à une sensibilité accrue à des stress biotiques. L'utilisation de variétés améliorées est une option bon marché et respectueuse de l'environnement pour lutter contre les maladies des plantes, mais le maintien du rendement d'un nouveau cultivar en bananeraie nécessite une bonne gestion de la fertilité des sols qui pourrait être obtenue par une utilisation judicieuse de fumier de volaille. Les effets des trois doses [(0, 10 et 20 t.ha-1] de fumier de volaille décomposé sur la croissance, la réponse à la cercosporiose noire et le rendement de PITA 24' (un hybride de plantain et de son grand-parent maternel 'Mbi-Egome' (une banane plantain locale ont été évalués à Onne (Nigeria dans une station à fortes précipitations de l'IITA. L'expérience a été menée selon un dispositif split plot en blocs aléatoires complets. Les résultats ont montré que les deux clones étudiés avaient des variables de croissance similaires, sauf pour la surface foliaire et la teneur en chlorophylle. Malgré la sensibilité du génotype hybride à la cercosporiose foliaire d'origine atmosphérique, les données sur les composantes du rendement ont montré que 'PITA 24' produisait significativement plus de mains et de doigts par régime, un meilleur rendement du régime et un meilleur rendement végétatif global, toutefois, les deux génotypes ont présenté un schéma similaire pour la répartition de la biomasse. Les plants fumés ont eu un rendement significativement amélioré par rapport aux plants témoins, mais il y a eu un rendement moindre pour la dose de 20 t.ha-1. L'augmentation des doses d'engrais a réduit de plus de 30 jours le temps de récolte; de même, la taille des plants, le drageonnage, la teneur en chlorophylle des feuilles, l'indice des feuilles non

  4. Responses of plasma glucose metabolism to exogenous insulin infusion in sheep-fed forage herb plantain and exposed to heat.

    Science.gov (United States)

    Al-Mamun, M; Shibuya, K; Kajita, M; Tamura, Y; Sano, H

    2017-01-16

    The use of herbal plants as traditional medicines has a century long history. Plantain (Plantago lanceolata L.) is a perennial herb containing bioactive components with free radical scavenging activities. An isotope dilution technique using [U-13C]glucose was conducted to determine the effect of plantain on the responses of plasma glucose metabolism to exogenous insulin infusion in sheep. Six crossbred sheep (three wethers and three ewes; mean initial BW=40±2 kg) were fed either a mixed hay of orchardgrass (Dactylis glomerata) and reed canarygrass (Phalaris arundinacea) (MH-diet) or mixed hay and fresh plantain (1 : 1 ratio, dry matter basis, PL-diet) and exposed to a thermoneutral (TN, 20°C; 70% relative humidity (RH)) environment or a heat exposure (HE, 30°C; 70% RH) for 5 days using a crossover design for two 23-day periods. The isotope dilution was conducted on days 18 and 23 of the experimental period during TN and HE, respectively. Plasma concentration of α-tocopherol was greater (Pinfusion.

  5. Brief Introduction to Compulsory Product Certification System

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ What is Compulsory Product Certification System? Compulsory Product Certification System is a kind of product qualifying assessment system which implements under laws and regulations by states in order to protect life security of human, animals and plants as well as environmental protection and national security.

  6. Evaluation of Antioxidant Potential and Nutritional Values of White Skinned Sweet Potato-Unripe Plantain Composite Flour Blends

    Directory of Open Access Journals (Sweden)

    S. O. Salawu

    2014-05-01

    Full Text Available Summary. The present investigation sought to evaluate the antioxidant properties, phenolic composition, nutrient composition of Unripe Plantain (UP -White Skinned Sweet potato (WSP flour blends. The flour were mixed in various proportions (UP: WSP; 100:0, 80:20, 60:40, 40:60, 20:80 and 0:100. HPLC/DAD phenolic analyses revealed the presence of some phenolic acids and flavonoids. The result of the antioxidant indices showed a progressive increase with respect to sweet potato inclusion and that high antioxidant indices were recorded for 100% WSP (total phenolic: 1.111mg/g; total flavonoid: 2030mg/g; reducing power: 0.76mg/g; ABTS radical scavenging activity:  3.08 x 10-6mg/g and hydroxyl radical scavenging activity: 82.017%, while the least values were recorded for 100% UP. The  proximate composition analysis  revealed that 100%UP had the highest carbohydrate (78.17%, protein (11.72%, fibre (0.20% and fat (5.56% content compared with whole potato flour and that other blends have a decreasing value with respect to increase in the composition of sweet potato. The highest level of Na, Kwas recorded for 100% UP while 100% WP had the highest level of Mg, Ca and P. These investigations showed that sweet potato-unripe plantain composite blend would be a good source of natural antioxidant as well as providing essential nutrients.Industrial Relevance. Several investigations have revealed the antioxidant and nutritional potentials of sweet potato and unripe-plantain when consumed separately. Also a number of scientific reports provide information on the use of sweet potato and unripe plantain as medicinal foods when consumed separately, and are commonly used as functional food especially in the management of diabetes. Therefore, this study sought to assess the antioxidant and nutritional potentials of phenolic containing unripe plantain (UP and white skinned sweet potato (WSP flour blends with a view identifying the blends with good nutritional and

  7. Product service system product design task planning with supplier participation

    Directory of Open Access Journals (Sweden)

    Zhongqi Sheng

    2015-12-01

    Full Text Available Product service system is a new-type production system with high-degree integration and overall optimization of product and service. The participation of suppliers in product service system development will greatly shorten the development cycle and enhance the production efficiency. The task planning of product design is one of the key phases of product service system development process, which mainly contains the design task decomposition and the design task allocation. Aiming at product service system product design, this article conducts the decomposition of design tasks, performs the recognition of coupling design task set, and realizes the structured modeling of design tasks. Outsourcing decision-making analysis is conducted on the design tasks obtained through decomposition process so as to confirm the design tasks that need the participation of suppliers. The allocation model of design tasks is constructed, and the suppliers that take part in product service system development are confirmed based on genetic algorithm. Taking the numerical control machine tool as an example, this article conducts the instance analysis and verifies the feasibility of the forenamed methods.

  8. Product Configuration Systems - Implications for Product Innovation and Development

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

  9. Pesticide Product Information System (PPIS)

    Science.gov (United States)

    PPIS includes registrant name and address, chemical ingredients, toxicity category, product names, distributor brand names, site/pest uses, pesticidal type, formulation code, and registration status for all products registered in the U.S.

  10. Plantain and banana starches: granule structural characteristics explain the differences in their starch degradation patterns.

    Science.gov (United States)

    Soares, Claudinéia Aparecida; Peroni-Okita, Fernanda Helena Gonçalves; Cardoso, Mateus Borba; Shitakubo, Renata; Lajolo, Franco Maria; Cordenunsi, Beatriz Rosana

    2011-06-22

    Different banana cultivars were used to investigate the influences of starch granule structure and hydrolases on degradation. The highest degrees of starch degradation were observed in dessert bananas during ripening. Scanning electron microscopy images revealed smooth granule surface in the green stage in all cultivars, except for Mysore. The small and round granules were preferentially degraded in all of the cultivars. Terra demonstrated a higher degree of crystallinity and a short amylopectin chain length distribution, resulting in high starch content in the ripe stage. Amylose content and the crystallinity index were more strongly correlated than the distribution of amylopectin branch chain lengths in banana starches. α- and β-amylase activities were found in both forms, soluble in the pulp and associated with the starch granule. Starch-phosphorylase was not found in Mysore. On the basis of the profile of α-amylase in vitro digestion and the structural characteristics, it could be concluded that the starch of plantains has an arrangement of granules more resistant to enzymes than the starch of dessert bananas.

  11. Beauveria bassiana Strains for Biological Control of Cosmopolites sordidus (Germ. (Coleoptera: Curculionidae in Plantain

    Directory of Open Access Journals (Sweden)

    Marilene Fancelli

    2013-01-01

    Full Text Available The objective of this study was to select strains of Beauveria bassiana for controlling Cosmopolites sordidus (Germ. in plantain farms (cv. Terra of the “Recôncavo” and southern regions in the state of Bahia, Brazil. The virulence of 32 B. bassiana isolates against C. sordidus was determined under laboratory conditions. Three isolates (CNPMF 407, CNPMF 218, and CNPMF 416 were selected for evaluation under field conditions in plantations located in the counties of Mutuípe and Wenceslau Guimarães. Population of C. sordidus was estimated every 15 days by using pseudostem traps. The efficiency of the three strains of B. bassiana was compared to chemical control (carbofuran, 4g/trap and absence of control. Carbofuran caused around 90% of adult mortality after 12 months, with a reduction in the population of C. sordidus since the first evaluation. A low number of trapped insects was observed in the fungus-treated plots, suggesting the efficiency of the isolates in controlling the C. sordidus population. The strain CNPMF 218 was the most efficient in controlling C. sordidus adults in both locations, causing around 20% mortality, leading to 40% population size reduction after 12 months.

  12. Production System Design for Multiple Brands

    DEFF Research Database (Denmark)

    Karlsson, Christer; Christensen, Irene

    appliances, cars, and trucks but also other products. An important denominator for the production system design is flow structures. Important dependent factors come from brand distinction, architectural characteristics, technology levels, supplier competence, process choice, process flow patterns, lay...

  13. Modernizing the Regulatory System for Biotechnology Products

    Science.gov (United States)

    This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.

  14. Conceptual design of a process plant for the production of plantain flour

    National Research Council Canada - National Science Library

    Ayodeji, Sesan Peter

    2016-01-01

    .... The process plant consists of washing, slicing, drying, milling and sieving machines. The design analysis of constituent machines and its performance evaluation were carried out using SolidWorks and other appropriate design equations...

  15. Product/Service-System Development

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

    2007-01-01

    Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...... in the design and development aspects of PSS. The objective of this paper is to explore how a global manufacturing company is developing an offering to their customers that is focused on the utility of their products throughout their life time. The paper describes the process of how a company is shifting from...

  16. Acrylamide formation in plantain (Musa paradisiaca) chips influenced by different ripening stages: A correlation study with respect to reducing sugars, amino acids and phenolic content.

    Science.gov (United States)

    Shamla, L; Nisha, P

    2017-05-01

    The effect of ripening on the formation of acrylamide in deep fried plantain chips made from Nendran variety (Musa paradisiaca) was investigated. The precursors of acrylamide formation, reducing sugars (glucose and fructose) and ten major amino acids, were quantified during different stages of ripening using HPLC and correlated with acrylamide formation. The total phenolic content and total flavonoid content were also estimated and correlated with acrylamide formation. Both glucose and fructose increased during ripening and demonstrated a positive correlation on formation of acrylamide (correlation coefficient of r=0.95 and 0.94 respectively (p0.05). The decreased levels of phenolic content during ripening of plantain were negatively correlated with acrylamide formation in the deep fried chips prepared. Thus the selection of proper ripening stage renders reduced formation of acrylamide in plantain chips to a reasonable extend.

  17. PMN Leukocytes and Fibroblasts Numbers on Wound Burn Healing on the Skin of White Rat after Administration of Ambonese Plantain Banana

    Directory of Open Access Journals (Sweden)

    Juniarti

    2012-04-01

    Full Text Available A study of ambonese plantain banana (Musa paradisiaca var sapientum Lamb treatment in burn wound healing on the skin of white rats (Rattus novergicus has been conducted. The wound healing of burn injuries was evaluated by counting the number of PMN leukocytes and fibroblasts at the 7th, 14th, and 21st days following the treatment. The study showed that the decrease in number of PMN leukocytes of subjects treated with ambonese plantain banana was relatively more significant compared to both negative and positive control (Bioplacenton ®. In contrast, an increasing number of fibroblasts was significantly demonstrated at the 14th and 21st days after treatment. In conclusion, ambonese plantain banana treatment in burn injuries will provide better results compared to both positive and negative controls.

  18. EFFECT OF THE ADDITION OF DEFATTED OKRA SEED (Abelmoschus esculentus FLOUR ON THE CHEMICAL COMPOSITION, FUNCTIONAL PROPERTIES AND Zn BIOAVAILABILITY OF PLANTAIN (Musa paradisiacal Linn FLOUR

    Directory of Open Access Journals (Sweden)

    Tesleem Ibrahim

    2012-08-01

    Full Text Available In Nigeria it is advised that nursing mothers should give their baby plantain flour paste “amala ogede” with ‘ewedu’ Corchorus olitorius soup during the process of weaning their baby. The over matured okra that cannot be cut with kitchen knife are thrown away in Nigeria, this lead to postharvest loss of okra. The seed in this okra could be utilised by processing into okra seed flour for the fortification of plantain flour. Since the okra seed flour is rich in oil and the oil contains cyclopropenoid fatty acids which cause some toxicity concerns therefore this work is to evaluate the chemical composition, the functional properties and Zn bioavailability of plantain flour mixed with defatted okra seed flour. The nutrient content increased significantly (P≤0.05, protein; 3.88 – 11.38 %, fibre; 3.03 – 16.30 % and ash; 2.72 – 5.77 % while the fat and carbohydrate content reduced significantly (P≤0.05 as the percentage of defatted okra seed flour increased. The bulk density of the plantain flour decreased significantly (P≤0.05 from 0.795 g/cm3 to 0.769 g/cm3 as the percentage of okra seed flour increased while the least gelation concentration increased significantly (P≤0.05 (10 to 20. The calculated [Ca][Phytate]/[Zn] molar ratio for the plantain flour mixed with defatted okra seed flour (0.02 – 0.04 mol/kg were below the critical level. The increase in the least gelation concentration coupled with increase in the protein content of the resultant flour from the blend means more of the protein will be available in the food made from the plantain flour mixed with defatted okra seed flour.

  19. Mudular Product Families and Assembly Systems

    DEFF Research Database (Denmark)

    Thyssen, Jesper

    of modular product families and the interacting assembly system.   The thesis reviews extant theory and provides various classifications and discussions guided by the overall theme of product modularity and assembly systems. The empirical system analysis, based upon a longitudinal single case study......, articulates a system model incorporating both structural and performance elements. The extensive and detailed case analysis provides the necessary insight into the specific variables associated with the complex configuration of modular products and assembly systems.   Based upon the system model a number...

  20. Production systems design : a product oriented approach and methodology

    OpenAIRE

    2008-01-01

    Production systems design is critical to achieving manufacturing performance and objectives. Although generic approaches to this design are available they may not be able to objectively address specific manufacturing configurations. Here it is argued that product oriented manufacturing (POM) organization offers advantages in relation to the function oriented one. Based on this, a methodology specially addressing POM systems design, and prototype of a Computer Aided Design Syste...

  1. Robust Medical Isotope Production System

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimpland, Robert Herbert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-06-15

    The success of this theoretical undertaking provided confidence that the behavior of new and evolving designs of fissile solution systems may be accurately estimated. Scaled up versions of SUPO, subcritical acceleratordriven systems, and other evolutionary designs have been examined.

  2. Robust Medical Isotope Production System

    Energy Technology Data Exchange (ETDEWEB)

    Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kimpland, Robert Herbert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-06-15

    The success of this theoretical undertaking provided confidence that the behavior of new and evolving designs of fissile solution systems may be accurately estimated. Scaled up versions of SUPO, subcritical acceleratordriven systems, and other evolutionary designs have been examined.

  3. Product Configuration Systems and Consequences for Productivity and Quality

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...... with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance...

  4. Plantain peel - a potential source of antioxidant dietary fibre for developing functional cookies.

    Science.gov (United States)

    Arun, K B; Persia, Florence; Aswathy, P S; Chandran, Janu; Sajeev, M S; Jayamurthy, P; Nisha, P

    2015-10-01

    Plantain cultivar Nendran is popular as a staple food in many parts of India and deep fried chips made from raw matured Nendran are one of the popular snack items in India. This study aims to utilize peel from Nendran variety- the main byproduct of banana chips industry- to develop high fibre cookies with enhanced bioactive content. Proximate analysis indicated that peels are rich in total dietary fibre (64.33 g/100 g), vitamins (Folic acid- 33.12 mg/100 g) and minerals (Potassium- 35.61 mg/100 g). Nendran Peel Flour (NPF) was extracted with hexane, ethyl acetate and methanol. Phenolic and flavonoid content was high for ethyl acetate extract (15.21 and 9.39 mg QE/g dry weight). Methanol extract was more potent in reducing Copper ion (2.36 μM TR/g dry weight) and scavenging NO (IC50-381.71 μg/mL). Ethyl acetate extract was capable of scavenging DPPH and hydroxyl radical. HPLC profiling showed presence of gallic acid, protocatechuic acid, rutin hydrate and quercetin in ethyl acetate extract and gallic acid, chlorogenic acid and vanillic acid in methanol extract. Cookies prepared with NPF possess higher total dietary fibre content. There was a decrease in spread ratio, breaking strength and browning index of cookies as the percentage of NPF increased. NPF incorporation gradually increased the phenolic content from 4.36 to 5.28 mg GAE, compared to control cookie (3.21 mg GAE). DPPH scavenging activity also increased with increase in NPF. Hence NPF is a very good source of antioxidant dietary fibre and acceptable cookies can be produced by replacing wheat flour with 10 % NPF.

  5. Strength of Blended Cement Sandcrete & Soilcrete Blocks Containing Cassava Waste Ash and Plantain Leaf Ash

    Directory of Open Access Journals (Sweden)

    L. O. Ettu

    2013-01-01

    Full Text Available This work investigated the compressive strength of binary and ternary blended cement sandcrete and soilcrete blocks containing cassava waste ash (CWA and plantain leaf ash (PLA. 135 solid sandcrete blocks and 135 solid soilcrete blocks of 450mm x 225mm x 125mm were produced with OPC-CWA binary blended cement, 135 with OPC-PLA binary blended cement, and 135 with OPC-CWA-PLA ternary blended cement, each at percentage OPC replacement with pozzolan of 5%, 10%, 15%, 20%, and 25%.Three sandcrete blocks and three soilcrete blocks for each OPC-pozzolan mix and the control were crushed to obtain their compressive strengths at 3, 7, 14, 21, 28, 50, 90, 120, and 150 days of curing. Sandcrete and soilcrete block strengths from binary and ternary blended cements were found to be higher than the control values beyond 90 days of hydration. The 150-day strength values for OPC-CWA-PLA ternary blended cement sandcrete and soilcrete blocks were respectively 5.90N/mm2and 5.10N/mm2for 5% replacement, 5.80N/mm2and 4.95N/mm2for 10% replacement, 5.65N/mm2and 4.85N/mm2for 15% replacement, 5.60N/mm2and 4.75N/mm2for 20% replacement, and 5.25N/mm2and 4.65N/mm2for 25% replacement; while the control values were 5.20N/mm2and 4.65N/mm2. Thus, OPC-CWA and OPC-PLA binary blended cements as well as OPC-CWA-PLA ternary blended cement could be used in producing sandcrete and soilcrete blocks with sufficient strength for use in building and minor civil engineering works where the need for high early strength is not a critical factor.

  6. Methanol production method and system

    Science.gov (United States)

    Chen, Michael J.; Rathke, Jerome W.

    1984-01-01

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  7. Mars Integrated Propellant Production System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Mars In-Situ Propellant Production System (IMISPPS) is an end-to-end system that will produce rocket propellant on Mars from CO2 in the Martian...

  8. Mars Integrated Propellant Production System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Mars In-Situ Propellant Production System (IMISPPS) is an end-to-end system that will produce rocket propellant on Mars from CO2 in the Martian...

  9. The beauty in product-service systems

    NARCIS (Netherlands)

    Post, R.A.G.; Da Silva Cardozo, O.; Hekkert, P.P.M.

    2015-01-01

    Aesthetic appreciation affects the success of products in a number of areas, such as user satisfaction and usability. Hence, designers apply aesthetic principles to create more successful products. However, it is still unclear how such principles apply to the services and systems that products are o

  10. Assessing product service systems (PSS)

    DEFF Research Database (Denmark)

    Hsuan, Juliana; McAloone, Tim C.; Neugebauer, Line

    We apply a management tool to classify different integrated PSS within the context of Danish maritime industry. We investigate how a firm should organize its operations to manage the transition from being a manufacturing to a servitizing company, and to provide a guideline for strategic positioni...... and planning of the balance between product sales and service activities....

  11. System of Natural Health Products

    Directory of Open Access Journals (Sweden)

    Angelica Paoletti

    2011-01-01

    Full Text Available Introduction. The safety of vitamin K antagonists (VKA use can be compromised by many popular herbal supplements taken by individuals. The literature reports that 30% of warfarin-treated patients self-medicates with herbs. Possible interactions represent an health risk. We aimed to identify all herbs-oral anticoagulants interactions collected in the Italian database of suspected adverse reactions to “natural health” products. Methods. The Italian database of spontaneous reports of suspected adverse reactions to natural products was analyzed to address herb-VKAs interactions. Results. From 2002 to 2009, we identified 12 reports with 7 cases of INR reduction in patients treated with warfarin (n=3 and acenocoumarol (n=4, and 5 cases of INR increase (all warfarin associated. It was reported 8 different herbal products as possibly interacting. Discussion. Our study confirms the risk of interactions, highlighting the difficulty to characterize them and their mechanisms and, finally, prevent their onset. The reported data underline the urgent need of healthcare providers being aware of the possible interaction between natural products and VKA, also because of the critical clinical conditions affecting patients. This is the first step to have the best approach to understand possible INR alterations linked to herb-VKA interaction and to rightly educate patients in treatment with VKA.

  12. Expected energy production evaluation for photovoltaic systems

    DEFF Research Database (Denmark)

    Ding, Yi; Østergaard, Jacob; Peng, Wang

    2011-01-01

    A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...

  13. Observed benefits from product configuration systems

    DEFF Research Database (Denmark)

    Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

    2013-01-01

    This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...

  14. NDSI products system based on Hadoop platform

    Science.gov (United States)

    Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

    2015-12-01

    Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

  15. Observed benefits from product configuration systems

    DEFF Research Database (Denmark)

    Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

    2013-01-01

    This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... systems in industry companies and partly to assess if the objectives suggested are appropriate for describing the impact of product configuration systems and identifying other possible objectives. The empirical study of the com-panies also gives an indication of more overall performance indicators being...

  16. Integrated Monitoring System of Production Processes

    Directory of Open Access Journals (Sweden)

    Oborski Przemysław

    2016-12-01

    Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

  17. Ultra-Deepwater Production Systems

    Energy Technology Data Exchange (ETDEWEB)

    K. L. Smith; M. E. Leveque

    2003-09-30

    This report includes technical progress made during the period October, 2002 through September, 2003. At the end of the second technical progress report, the ConocoPhillips opportunities to apply subsea processing in the Gulf of Mexico had been exhausted, and an alternative site was identified in Norway. This was a non-ConocoPhillips operated field, and the subsea processing was proposed as a phased development approach with 2-phase separation at the field, and then gas and liquids exported via pipeline to remote platform locations for processing. Although the unrisked economics were quite favorable, the risked economic evaluation compelled the operator to develop the field with the more conventional and proven Floating Production, Storage and Offloading (FPSO) option. Work on the subsea processing was suspended at this time. Discussions with DOE regarding two other step-change deepwater technologies ensued. One was an effort to develop a light-weight, high pressure composite production riser. A field demonstration of the design would then be performed by deploying a limited number of composite joints in a Gulf of Mexico deepwater development. The other was to begin the process of taking drilling with casing technology to the deepwater. This is called, ''close-tolerance liner drilling''. It was agreed that both technologies should be pursued, and the work began. During this reporting period, the initial production riser design had been completed and preliminary test sample components were being fabricated. Regarding the liner drilling, the sub-contractors were selected, the design basis was agreed and designs progressed towards meeting a projected first quarter, 2004 onshore test program.

  18. Comparison of different pretreatment strategies for ethanol production of West African biomass.

    Science.gov (United States)

    Thomsen, Sune Tjalfe; Londoño, Jorge Enrique González; Schmidt, Jens Ejbye; Kádár, Zsófia

    2015-03-01

    Pretreating lignocellulosic biomass for cellulosic ethanol production in a West African setting requires smaller scale and less capital expenditure compared to current state of the art. In the present study, three low-tech methods applicable for West African conditions, namely Boiling Pretreatment (BP), Soaking in Aqueous Ammonia (SAA) and White Rot Fungi pretreatment (WRF), were compared to the high-tech solution of hydrothermal pretreatment (HTT). The pretreatment methods were tested on 11 West African biomasses, i.e. cassava stalks, plantain peelings, plantain trunks, plantain leaves, cocoa husks, cocoa pods, maize cobs, maize stalks, rice straw, groundnut straw and oil palm empty fruit bunches. It was found that four biomass' (plantain peelings, plantain trunks, maize cobs and maize stalks) were most promising for production of cellulosic ethanol with profitable enzymatic conversion of glucan (>30 g glucan per 100 g total solids (TS)). HTT did show better results in both enzymatic convertibility and fermentation, but evaluated on the overall ethanol yield the low-tech pretreatment methods are viable alternatives with similar levels to the HTT (13.4-15.2 g ethanol per 100 g TS raw material).

  19. Assessing product service systems (PSS)

    DEFF Research Database (Denmark)

    Hsuan, Juliana; McAloone, Tim C.; Neugebauer, Line

    We apply a management tool to classify different integrated PSS within the context of Danish maritime industry. We investigate how a firm should organize its operations to manage the transition from being a manufacturing to a servitizing company, and to provide a guideline for strategic positioni...... and planning of the balance between product sales and service activities.......We apply a management tool to classify different integrated PSS within the context of Danish maritime industry. We investigate how a firm should organize its operations to manage the transition from being a manufacturing to a servitizing company, and to provide a guideline for strategic positioning...

  20. EVALUATION OF GASTRIC ANTIULCEROGENIC ACTION OF PLANTAIN BANANA ( MUSA SAPIENTUM VAR. PARADISIACA IN ASPIRIN PLUS PYLORUS LIGATED ALBINO RATS

    Directory of Open Access Journals (Sweden)

    K.R. Tandel* and B.K. Shah

    2012-11-01

    Full Text Available Objectives: To assess the effect of unripe dried banana powder in experimentally induced gastric ulcers and effect on gastric acid secretion. To evaluate the antiulcerogenic effect of plantain banana of Gujarat as a part of evaluation of impact of biological variables on this activity. Materials and methods: Total of 24 albino rats of either sex weighing between 150-250 gm were randomly divided into 4 groups. Each group has 6 no. of rats. The first group received placebo (distilled water, the second, third & forth group received 0.5gm/kg, 1gm/kg and 2mg/kg of banana powder respectively. Banana powder was given as suspension at fixed time (3 times in a day for two days and animals were kept for fasting for another 48hrs. On 5th day, the animals were sacrificed after 7 hrs and stomach were removed for examination and gastric juice samples were collected to analyze volume and acidity.Results: Orally administered banana powder in the dose of 2gm/kg caused a statistically significant decrease in aspirin with pyloric ligation induced ulcers in rats without significantly decrease in secretary activity.Conclusion: It can be concluded from these results that vegetable plantain banana has antiulcerogenic and mucosal protective actions, but it has no antisecretory activity.

  1. Effects of Dosage Sequence on the Efficacy of Nonfumigant Nematicides, Plantain Yields, and Nematode Seasonal Fluctuations as influenced by Rainfall.

    Science.gov (United States)

    Badra, T; Caveness, F E

    1983-10-01

    Four nonfumigant nematicides applied three times during the wet season were used to study dosage sequence and nematicide effectiveness. Control of Helicotylenchus multicinctus (Cobb) Thorne and Meloidogyne javanica (Treub) Chitwood increased plantain (Musa AAB) yields. The nematicide (aldicarb, carbofuran, oxamyl, and miral) performance and yield response varied with dosage sequences. Applications of 2, 3, and 2 g ai/tree in March, July, and October (sequence I), respectively, gave greater control of M. javanica than did applications of 3, 2, and 2 g ai/tree in March, June, and September (sequence II), respectively. However, the high initial dose sequence was effective against H. multicinctus. Persistence of the different nematicides differed over the 14-month experimental period. Miral, aldicarb, and carbofuran were the most effective treatments against either species by the end of the wet and dry seasons. Dry season residual nematode populations were significantly lower in nematicide treated than in control plots. Yield increases over controls were 96.9, 90.1, 78.4, and 70.1% for carbofuran applied by sequence II, aldicarb by II and I, and oxantyl by II, respectively. Nematode populations directly fluctuated with rainfall and dropped to low (H. multicinctus) or to undetectable (M. javanica juveniles) levels during the dry season. Of the two nematodes studied, the more serious pest to plantain was H. multicinctus; it was tolerant to drought and survived the dry season in untreated soils.

  2. C-11 cyanide production system

    Science.gov (United States)

    Kim, Dohyun; Alexoff, David; Kim, Sung Won; Hooker, Jacob; Ferrieri, Richard A

    2015-01-13

    A method for providing .sup.11C-labeled cyanides from .sup.11C labeled oxides in a target gas stream retrieved from an irradiated high pressure gaseous target containing O.sub.2 is provided, wherein .sup.11C labeled oxides are reduced with H.sub.2 in the presence of a nickel catalyst under a pressure and a temperature sufficient to form a product stream comprising at least about 95% .sup.11CH.sup.4 , the .sup.11CH.sub.4 is then combined with an excess of NH.sub.3 in a carrier/reaction stream flowing at an accelerated velocity and the combined .sup.11CH4 carrier/reaction stream is then contacted with a platinum (Pt) catalyst particulate supported on a substantially-chemically-nonreactive heat-stable support at a temperature of at least about 900 .degree. C., whereby a product stream comprising at least about 60%H.sup.11CN is provided in less than 10 minutes from retrieval of the .sup.11C labeled oxide.

  3. Toyota production system beyond large-scale production

    CERN Document Server

    Ohno, Taiichi

    1998-01-01

    In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

  4. Clinical Productivity System - A Decision Support Model

    CERN Document Server

    Bennett, Casey C

    2012-01-01

    Purpose: This goal of this study was to evaluate the effects of a data-driven clinical productivity system that leverages Electronic Health Record (EHR) data to provide productivity decision support functionality in a real-world clinical setting. The system was implemented for a large behavioral health care provider seeing over 75,000 distinct clients a year. Design/methodology/approach: The key metric in this system is a "VPU", which simultaneously optimizes multiple aspects of clinical care. The resulting mathematical value of clinical productivity was hypothesized to tightly link the organization's performance to its expectations and, through transparency and decision support tools at the clinician level, affect significant changes in productivity, quality, and consistency relative to traditional models of clinical productivity. Findings: In only 3 months, every single variable integrated into the VPU system showed significant improvement, including a 30% rise in revenue, 10% rise in clinical percentage, a...

  5. Modular Product Families and Assembly Systems

    DEFF Research Database (Denmark)

    Thyssen, Jesper

    2005-01-01

    This research centres on assembly systems designed for utilizing product modularization. Altogether, the task for companies has become an issue of managing the overall trade-off between the external market’s desire for variety and the internal efficiency and effectiveness. Product modularization...... of the rela-tionship between variables associated with configuration of modular product families and the interacting assembly system. One core result is the development of a system model based on the longitudinal case study incorporating both structural and performance elements. Based on the system model......) the mix flexible con-figuration focusing on the simultaneous product variety. These two views are in particular different in respect to the understanding of product modularization. All in all, modularization needs to be, and can be, configured in regard to the specific task, which is believed constituting...

  6. Statistical Analysis of the Effects of Drying Temperature and Pretreatment on the Proximate Composition of Dried Matured Green Plantain (Musa Paradisiaca

    Directory of Open Access Journals (Sweden)

    K.A. Yusuf

    2014-07-01

    Full Text Available Drying has been identified as the efficient means of ensuring continuous food supply to the growing population of any country and to enable the farmers produce more high quality marketable products. In this study, the effects of drying temperature and pretreatment on the quality of dried mature green plantain (Musa paradisiaca were studied using an electrically-powered cabinet dryer. The product was dried from an initial moisture content of 62% (w.b to a moisture content of 11.9% (w.b. A factorial experiment in a Randomized Complete Block Design (RCBD involving three levels of temperature (50, 60 and 70 0C; three levels of pretreatment (blanching, boiling and control and three replications were used. The quality analysis of the dried samples at different level of drying temperatures and pre-treatments was carried out for protein, fat, ash and fibre content and the data obtained were statistically analyzed using SPSS 16.0 software to determine the level of significance among the treatment factors on the dried samples. The protein, fat and fibre content decreased with increase in temperature but the ash content increased with increase in temperature. In pretreatments, control had the highest protein content of 4.27% at 60 0C, lowest fat content of 2.26% at 70 0 C and moderate fibre and ash contents of 0.68% and 1.82% respectively at 60 0C. Boiled sample also had the highest fat content of 4.27% at 50 0C, lowest fat content 2.26% at 70 0C and moderate fibre and ash contents of 0.88% and 1.73% respectively at 60 0C. lastly, blanched sample had the highest fat content of 4.11% at 50 0 C, lowest fat content 2.54% at 70 0C and moderate fibre and ash contents of 0.83% and 1.45% respectively at 60 0C.

  7. Fruit physical characteristics, proximate, mineral and starch characterization of FHIA 19 and FHIA 20 plantain and FHIA 03 cooking banana hybrids

    National Research Council Canada - National Science Library

    Annor, George Amponsah; Asamoah-Bonti, Prudence; Sakyi-Dawson, Esther

    2016-01-01

    .... This study aimed at evaluating the physical characteristics, proximate and minerals composition, and characterizing the starch of plantain and a cooking banana hybrid release by Fundación Hondureña de Investigación Agrícola (FHIA...

  8. Ameliorative Potentials of Cocoyam (Colocasia esculenta L. and Unripe Plantain (Musa paradisiaca L. on the Relative Tissue Weights of Streptozotocin-Induced Diabetic Rats

    Directory of Open Access Journals (Sweden)

    C. O. Eleazu

    2013-01-01

    Full Text Available Aim. To investigate the ameliorating potentials of cocoyam (Colocasia esculenta L. and unripe plantain (Musa paradisiaca L. incorporated feeds on the renal and liver growths of diabetic rats, induced with 55 and 65 mg/kg body weight of Streptozotocin. Method. The blood glucose level of the rats was measured with a glucometer, the protein and glucose and specific gravity (SPGR in the urine samples of the rats were measured using urine assay strips and urinometer respectively. The chemical composition and antioxidant screening of the test feeds were carried out using standard techniques. Results. Administration of the test feeds for 21 days to the diabetic rats of groups 4 and 5, resulted in 58.75% and 38.13% decreases in hyperglycemia and amelioration of their elevated urinary protein, glucose, SPGR, and relative kidney weights. The diabetic rats administered cocoyam incorporated feeds, had 2.71% and 19.52% increases in weight and growth rates, the diabetic rats administered unripe plantain incorporated feeds had 5.12% and 29.52% decreases in weight and growth rates while the diabetic control rats had 28.69%, 29.46%, 248.9% and 250.14% decreases in weights and growth rates. The cocoyam incorporated feeds contained higher antioxidants, minerals and phytochemicals except alkaloids than unripe plantain feed. Conclusion. Cocoyam and unripe plantain could be useful in the management of diabetic nephropathy.

  9. Systems Thinking, Lean Production and Action Learning

    Science.gov (United States)

    Seddon, John; Caulkin, Simon

    2007-01-01

    Systems thinking underpins "lean" management and is best understood through action-learning as the ideas are counter-intuitive. The Toyota Production System is just that--a system; the failure to appreciate that starting-place and the advocacy of "tools" leads many to fail to grasp what is, without doubt, a significant…

  10. Entanglement production in Quantized Chaotic Systems

    CERN Document Server

    Bandyopadhyay, J N; Bandyopadhyay, Jayendra N.; Lakshminarayan, Arul

    2005-01-01

    Quantum chaos is a subject whose major goal is to identify and to investigate different quantum signatures of classical chaos. Here we study entanglement production in coupled chaotic systems as a possible quantum indicator of classical chaos. We use coupled kicked tops as a model for our extensive numerical studies. We find that, in general, presence of chaos in the system produces more entanglement. However, coupling strength between two subsystems is also very important parameter for the entanglement production. Here we show how chaos can lead to large entanglement which is universal and describable by random matrix theory (RMT). We also explain entanglement production in coupled strongly chaotic systems by deriving a formula based on RMT. This formula is valid for arbitrary coupling strengths, as well as for sufficiently long time. Here we investigate also the effect of chaos on the entanglement production for the mixed initial state. We find that many properties of the mixed state entanglement production...

  11. Product Configuration Systems and Consequences for Productivity and Quality

    DEFF Research Database (Denmark)

    Pedersen, Jørgen Lindgaard; Edwards, Kasper

    2004-01-01

    Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...... with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance...... with expectations. A problem is that costs in several cases are unknown or very uncertain. But in cases where they are known there are economic arguments in favour of the PCS....

  12. Conceptual frames for changing production system design

    DEFF Research Database (Denmark)

    Jensen, Per Langå; Broberg, Ole

    2003-01-01

    In order to integrate ergonomic aspects into the design of products and production systems many tools and procedures are available. For the ergonomists, however, it is a question of recognizing the organizational context and the role to play for making integration possible. Based on an understand...

  13. Great Changes in Production System of Yak

    Institute of Scientific and Technical Information of China (English)

    陆仲璘

    2005-01-01

    Since the time that yaks were domesticated, due to the special social, natural and economic conditions ,and yaks own biological and economic characteristics, the Yak Production System has been formed, which is different from other livestock production systems. The system has the characteristics of unique breed, herding perennially on grassland and a variety of products. It is a low-efficiency system with the low-cost,low-production,long-cycle and slowfunction. Based on the experiments and research,exercising the measure of stopping milking and mainly producing beef,it's the redisposition of resources and the combination of multi-superiority. By the scientific management, the superiority of grass growing in warm season, the dominant position of total nutrition of mother milk, the superiority of calves developing in early days and the genetic preponderance of new breeds of yak are perfectly integrated. It also got the economic, biological and ecological benefits.

  14. High Production Volume Information System (HPVIS)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...

  15. GATING SYSTEMS FOR PRODUCTION OF HYDRODISTRIBUTORS

    Directory of Open Access Journals (Sweden)

    D. A. Volkov

    2010-01-01

    Full Text Available Gating systems of the first group of special ways of casting into shell molds, casting in lined chill mold as more effective for production of hydrodistributors were developed and studied.

  16. Modelling Product Families for Product Configuration Systems with Product Variant Master

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

    2010-01-01

    developed in cooperation with several industrial companies. This article refers to experiences from applying the modelling technique in three different companies. Based upon these experiences, the utility of the product variant master and CRC-cards is evaluated. Significance. Product configuration systems...... are increasingly used in industrial companies as a means for efficient design of customer tailored products. The design and implementation of product configuration systems is a new and challenging task for the industrial companies and calls for a scientifically based framework to support the modelling......This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC...

  17. Entanglement production in quantized chaotic systems

    Indian Academy of Sciences (India)

    Jayendra N Bandyopadhyay; Arul Lakshminarayan

    2005-04-01

    Quantum chaos is a subject whose major goal is to identify and to investigate different quantum signatures of classical chaos. Here we study entanglement production in coupled chaotic systems as a possible quantum indicator of classical chaos. We use coupled kicked tops as a model for our extensive numerical studies. We find that, in general, chaos in the system produces more entanglement. However, coupling strength between two subsystems is also a very important parameter for entanglement production. Here we show how chaos can lead to large entanglement which is universal and describable by random matrix theory (RMT). We also explain entanglement production in coupled strongly chaotic systems by deriving a formula based on RMT. This formula is valid for arbitrary coupling strengths, as well as for sufficiently long time. Here we investigate also the effect of chaos on the entanglement production for the mixed initial state. We find that many properties of the mixed-state entanglement production are qualitatively similar to the pure state entanglement production. We however still lack an analytical understanding of the mixed-state entanglement production in chaotic systems.

  18. PLM system support for modular product development

    DEFF Research Database (Denmark)

    Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

    2015-01-01

    properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper......A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...

  19. Production Flexibility in Extensive Beef Farming Systems

    Directory of Open Access Journals (Sweden)

    Laura Astigarraga

    2011-03-01

    Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

  20. Matching Livestock Production Systems and Environment

    Science.gov (United States)

    Becchetti, T.; Stackhouse, J.; Snell, L.; Lile, D.; George, H.; Harper, J. M.; Larson, S.; Mashiri, F.; Doran, M.; Barry, S.

    2015-12-01

    Livestock production systems vary greatly over the world. Producers try to match the resources they have with the demands of production, this can vary by species, class of animal, number of animals, and production goals, etc. Using California's diversity in production systems as an example, we explored how livestock producers best utilize the forage and feed found in different ecosystems and available in different parts of the state. Livestock grazing, the predominant land use in California and in much of the world, makes efficient use of the natural vegetation produced without additional water (irrigation), minimal inputs such as fertilizer while often supporting a variety of conservation objectives including vegetation management, fire fuels management, and habitat and open space conservation. The numerous by-products produced by other sectors of California's agriculture as well as food industries, such as brewer's grain, cottonseeds, and almond hulls are utilized as a feed source for livestock. These by-products are not only an important feed source especially in drought years but are diverted from our waste stream when utilized by livestock. The concept of matching available resources to livestock needs throughout the world is often overlooked and production systems are often over simplified in projects conducting a life cycle analysis or developing carbon foot prints for livestock production systems. This paper provides details on the various production systems found in California, the ecosystem they have adapted to, and how the producers use science and ecological knowledge to match the biological requirements of the livestock and conservation objectives to feed and forage resources.

  1. Goniometer Control System for Coherent Bremsstrahlung Production

    Science.gov (United States)

    Acousta, V. M.

    2002-08-01

    A system for the generation of a high-intensity, quasi-monochromatic photon beam is discussed. The theory behind coherent bremsstrahlung photon beam production is analyzed and developed. The mechanics of a goniometer control system are presented. The software developed for remote control of the goniometer is also discussed. Finally, the results from various performance measurements are included.

  2. Vector Product and an Integrable Dynamical System

    Institute of Scientific and Technical Information of China (English)

    Willi-Hans Steeb; Yorick Hardy; Igor Tanski

    2011-01-01

    We study an autonomous system of first order ordinary differential equations based on the vector product. We show that the system is completely integrable by constructing the first integrals. The connection with Nambu mechanics is established. The extension to higher dimensions is also discussed.

  3. Decision models in designing flexible production systems

    Directory of Open Access Journals (Sweden)

    Florescu Adriana

    2017-01-01

    Full Text Available Flexible production system is a complex whole that raise some issues in terms of its design and in relation to the conditions for implementing it. To implement a flexible production system configuration must be found that satisfies both economic and system performance requirements. The configuration which best meet the objectives of introducing a flexible production system must be sought in the set of alternatives defined and evaluated. In this paper we present a methodology of realising the configuration and complex evaluation of the analyzed system. It will be developed models which generate new alternative configurations, optimization and evaluation models of the performance of the flexible production system. This will create a framework for interactive decision support, user-oriented that can be used by management to solve this selection problem. The applicative character of the study consist in tracking of the technological process in real time using the developed software package on the designed system, based on mathematical models for configuration and optimization of the system.

  4. Product-Oriented Integrated CAPP System

    Institute of Scientific and Technical Information of China (English)

    王凤岐; 王磊; 郭伟; 白峰

    2003-01-01

    The necessity of product-oriented integrated computer aided process planning (CAPP) is analyzed,and the system architecture and the main functions are described in detail. The key issues of the system, such as the product-oriented process planning method, the human-machine cooperation in process planning, the generation of manufacture bill of material (MBOM) and the dynamic data exchanging technology between CAPP and enterprise resource planning (ERP), are discussed. The CAPP system has been applied at a CIMS environment corporation successfully.

  5. Sustaining Biodiversity and Income against Climate Change through Food Value Chain System by the Small-Holder Farmers in Southern Nigeria

    Directory of Open Access Journals (Sweden)

    Asadu Charles Livinus Anija

    2016-11-01

    Full Text Available Biodiversity and sustainable income are very necessary in ecosystem stability. The food value chain (FVC introduced in Nigeria to transform agriculture is commendable because through the system farmers receive various incentives as highly subsidized inputs from government and loans of low interest rates from designated Agricultural Banks and Central Bank. However, the system encourages specialization in the production of the reference crops but intercropping and mixed cropping systems practiced by most small-holder farmers because of its inherent advantages is de-emphasized or completely abandoned. This paper presents the results of two surveys of sole pepper and maize growers in 2015 and 2016 respectively as affected by sudden stoppage of rainfall in Nsukka area. The analyses showed that on the average > 70 % of the pepper farmers lost ≈ 65 % of their pepper fields while ≈ 57 % of the maize fields were lost. For a substitute intercropping system, plantain yield data from plantain plus moringa intercrop trials carried out in 2014 and 2015 were analyzed and projected to incorporate a food crop within inter-alleys. The mean plantain yields from the trials were 20 kg plant-1 for fresh bunch and 7 suckers stand-1. Based on a 6 m x 5 m (≈330 plants ha-1 spacing and the 2016 prices of bunches and suckers, these yields translated to a minimum net income per annum of N 1 320 000.00 (N 330 000.00 from bunches and N 990 000.00 from 6 suckers (net stand-1. Proceeds from the food crop, moringa seed and leaf extracts used as liquid fertilizer took care of the cost of other inputs and cultural practices. The inter-row spacing of 6 m allows mechanical cultivation of any food crop by the farmer. This system was considered a reliable insurance against climate change and pest insurgence and can be adopted by farmers in the entire southern Nigeria because both plantain and moringa can do very well in the subregion.

  6. Banana production systems: identification of alternative systems for more sustainable production.

    Science.gov (United States)

    Bellamy, Angelina Sanderson

    2013-04-01

    Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

  7. Design, product structuring and modelling of mechatronic products and systems

    DEFF Research Database (Denmark)

    Conrad, Finn; Sørensen, Torben

    2003-01-01

    Information Technology offers software and hardware for improvement of the engineering design, structuring and control systems, and industrial applications. The latest progress in IT makes integration of an overall design and manufacturing IT- concept feasible and commercially attractive. An IT......-tool concept for modelling, simulation and design of mechatronic products and systems is proposed in this paper. It built on results from a Danish mechatronic research program on intelligent motion control as well as from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components...

  8. Design, product structuring and modelling of mechatronic products and systems

    DEFF Research Database (Denmark)

    Conrad, Finn; Sørensen, Torben

    2003-01-01

    Information Technology offers software and hardware for improvement of the engineering design, structuring and control systems, and industrial applications. The latest progress in IT makes integration of an overall design and manufacturing IT- concept feasible and commercially attractive. An IT......-tool concept for modelling, simulation and design of mechatronic products and systems is proposed in this paper. It built on results from a Danish mechatronic research program on intelligent motion control as well as from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components...

  9. An Approach to Intelligent Speech Production System

    Institute of Scientific and Technical Information of China (English)

    陈芳; 袁保宗

    1997-01-01

    In the paper an intelligent speech production system is established by using language information processing technology.The concept of bi-directional grammar is proposed in Chinese language information processing and a corresponding Chinese characteristic network is completed.Correct text can be generated through grammar parsing and some additional rules.According to the generated text the system generates speech which has good quality in naturalness and intelligibility using Chinese Text-to-Speech Conversion System.

  10. Production Facility System Reliability Analysis Report

    Energy Technology Data Exchange (ETDEWEB)

    Dale, Crystal Buchanan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Klein, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-10-06

    This document describes the reliability, maintainability, and availability (RMA) modeling of the Los Alamos National Laboratory (LANL) design for the Closed Loop Helium Cooling System (CLHCS) planned for the NorthStar accelerator-based 99Mo production facility. The current analysis incorporates a conceptual helium recovery system, beam diagnostics, and prototype control system into the reliability analysis. The results from the 1000 hr blower test are addressed.

  11. Energy condensed packaged systems. Composition, production, properties

    Directory of Open Access Journals (Sweden)

    Igor L. Kovalenko

    2015-03-01

    Full Text Available In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids or on combinations thereof with petroleum products. And ceresin or petroleum wax can be used as the structuring additive. The influence of the technology of energy condensed systems production on the physicochemical and detonation parameters of emulsion explosives is considered. It is shown the possibility of obtaining of emulsion systems with dispersion of 1.3...1.8 microns and viscosity higher than 103 Pa∙s in the apparatus of original design. The sensitizing effect of chlorinated paraffin CP-470 on the thermolysis of energy condensed emulsion system is shown. The composition and production technology of energy condensed packaged emulsion systems of mark Ukrainit-P for underground mining in mines not dangerous on gas and dust are developed.

  12. Managing complexity of product mix and production flow in configure-to-order production systems

    DEFF Research Database (Denmark)

    Myrodia, Anna; Bonev, Martin; Hvam, Lars

    2014-01-01

    In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components......, or increasing lot sizes and storage capacity have been proposed. Our study presents a practical framework for quantifying the impact of a two-way substitution at different production stages and its impact on storage and machinery utilization. In a case study we quantify the relation between substitution, lot...... sizing and capacity utilization, while maintaining the production capacity as well as the external product variety....

  13. Consumer attitudes to different pig production systems

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Grunert, Klaus G; Zhou, Yanfeng

    2013-01-01

    In many Western countries, consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers' attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies...... on Western consumers' attitudes to various forms of food production, little is known about the level of Chinese consumers' attitudes. A cross-sectional survey was carried out with 472 participants in six Chinese cities. Results indicate that Chinese consumers prefer industrial pig production systems, where...... traditional pig breeds are raised, over large-scale and small family farms. Farms with maximum attention to food safety which furthermore can provide lean meat with consistent quality are also preferred. Imported pig breeds and tasty, but variable meat were rejected. A 3-cluster solution found that consumers...

  14. Woody biomass production systems for Florida

    Energy Technology Data Exchange (ETDEWEB)

    Rockwood, D.L.; Pathak, N.N.; Satapathy, P.C. (Florida Univ., Gainesville, FL (United States). Dept. of Forestry)

    1993-01-01

    Woody biomass production research in Florida has addressed genetic improvement, coppice productivity, clonal propagation, biomass properties, and economics of Eucalyptus and other species in short rotation, intensive culture systems. Improved E. grandis seedlings could more than double productivity, but exceptional clones offer more immediate potential in southern Florida. E. tereticornis and E. camaldulensis appear to have frost-resistance and good growth in central and southern Florida. For northern Florida, E. amplifolia has good frost-resilience and coppicing ability. Eucalytpus species are suitable for fermentation processes. Other promising species include Casuarina glauca and Taxodium distichum in southern Florida, and Sapium sebiferum state-wide. Break-even costs for biomass production systems with Eucalyptus range from approximately $2.00 to $4.00 GJ[sup -1]; short rotation culture appears feasible for slash pine in northern and central Florida but cannot yet be advised for sand pine. (author)

  15. Business cases for product configuration systems

    DEFF Research Database (Denmark)

    Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

    to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested......In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...

  16. 大蕉淀粉的复合酶法改性工艺优化%Optimization of Double-Enzymatic Modification of Plantain Starch

    Institute of Scientific and Technical Information of China (English)

    黄守耀; 夏雨; 杜冰; 原敏敏; 鲁旺旺; 白永亮; 徐勇; 杨公明

    2012-01-01

    利用复合酶对大蕉淀粉进行改性研究,在单因素试验基础上进行二次正交旋转回归设计优化大蕉淀粉复合酶法改性的最佳工艺条件,并对改性前后大蕉淀粉颗粒形态进行观察比较。结果表明:复合酶法改性大蕉淀粉的最佳工艺条件为淀粉乳质量分数5%、酶用量25U/mL、60℃酶解24h。在此条件下,大蕉淀粉的水解率为16.17%,与模型预测值基本一致。扫描电镜显示,改性淀粉颗粒出现孔洞,形貌更加圆滑,粒径有所减小,分布较为均匀,可有效提高大蕉淀粉加工特性和改善产品口感。%The compound enzyme was used for the modification of plantain starch in this article.On the basis of single factor tests,orthogonal rotation combination design was used to optimize modification process of plantain starch.The microscopic shape of starch was observed.The results indicated that the optimal conditions for plantain starch modification by compound enzyme were starch milk concentration 5%,compound enzyme concentration 25 U/mL,enzymatic hydrolysis time of 24 h and hydrolysis temperature of 60 ℃.Under the optimal hydrolysis conditions,the hydrolysis rate of plantain starch was 16.17%,which was consistent with the predicted value.The scanning electron microscope revealed a lot of keyholes,smoother shape,reduced and evenly distributed particle size in modified plantain starch.Meanwhile,the quality and taste of modified plantain starch were significantly improved.

  17. Comparison of Different Pretreatment Strategies for Ethanol Production of West African Biomass

    DEFF Research Database (Denmark)

    Thomsen, Sune Tjalfe; Gonzalez Londono, Jorge Enrique; Schmidt, Jens Ejbye

    2015-01-01

    husks, cocoa pods, maize cobs, maize stalks, rice straw, groundnut straw and oil palm empty fruit bunches. It was found that four biomass’ (plantain peelings, plantain trunks, maize cobs and maize stalks) were most promising for production of cellulosic ethanol with profitable enzymatic conversion...... of glucan (>30 g glucan per 100 g total solids (TS)). HTT did show better results in both enzymatic convertibility and fermentation, but evaluated on the overall ethanol yield the low-tech pretreatment methods are viable alternatives with similar levels to the HTT (13.4–15.2 g ethanol per 100 g TS raw...

  18. Geometrical product specifications. Datums and coordinate systems

    Science.gov (United States)

    Glukhov, V. I.; Ivleva, I. A.; Zlatkina, O. Y.

    2017-06-01

    The work is devoted to the relevant topic such as the technical products quality improvement due to the geometrical specifications accuracy. The research purpose is to ensure the quality indicators on the basis of the systematic approach to the values normalization and geometrical specifications accuracy in the workpiece coordinate systems in the process of design. To achieve the goal two tasks are completed such as the datum features classification according to the number of linear and angular freedom degrees constraints, called the datums informativeness, and the rectangular coordinate systems identification, materialized by workpiece datums sets. The datum features informativeness characterizes the datums functional purpose to limit product workpiece linear and angular degrees of freedom. The datum features informativeness numerically coincides with the kinematic pairs classes and couplings in mechanics. The datum features informativeness identifies the coordinate system without the location redundancy. Each coordinate plane of a rectangular coordinate system has different informativeness 3 + 2 + 1. Each coordinate axis also has different informativeness 4+2+Θ (zero). It is possible to establish the associated workpiece position with three linear and three angular coordinates relative to two axes with the informativeness 4 and 2. is higher, the more informativeness of the coordinate axis or a coordinate plane is, the higher is the linear and angular coordinates accuracy, the coordinate being plotted along the coordinate axis or plane. The systematic approach to the geometrical products specifications positioning in coordinate systems is the scientific basis for a natural transition to the functional dimensions of features position - coordinating dimensions and the size of the features form - feature dimensions of two measures: linear and angular ones. The products technical quality improving is possible due to the coordinate systems introduction materialized by

  19. Modeling and analysis of biomass production systems

    Energy Technology Data Exchange (ETDEWEB)

    Mishoe, J.W.; Lorber, M.N.; Peart, R.M.; Fluck, R.C.; Jones, J.W.

    1984-01-01

    BIOMET is an interactive simulation model that is used to analyze specific biomass and methane production systems. The system model is composed of crop growth models, harvesting, transportation, conversion and economic submodels. By use of menus the users can configure the structure and set selected parameters of the system to analyze the effects of variables within the component models. For example, simulations of a water hyacinth system resulted in yields of 63, 48 and 37 mg/ha/year for different harvest schedules. For napier grass, unit methane costs were $3.04, $2.86 and $2.98 for various yields of biomass. 10 references.

  20. Configuration Design of Product Service System for CNC Machine Tools

    OpenAIRE

    Zhongqi Sheng; Tao Xu; Junyou Song

    2015-01-01

    Product service system is a combination of product and services to meet the customer requirements. Configuration design is the key process of product service system development. This paper studies the configuration design of product service system for CNC machine tools. The research explores the configuration design process of product service system development, analyzes the retrieval method of product service system schemes, determines the configuration sequence of product modules and servic...

  1. Towards unification of product and enterprise system descriptions

    CSIR Research Space (South Africa)

    Erasmus, J

    2015-06-01

    Full Text Available An argument is presented for the unification of descriptions of product systems and enterprise systems. Product systems are developed and produced by enterprises, thus forming an integral part of the enterprise's architecture. However, many products...

  2. The Next Generation ATLAS Production System

    CERN Document Server

    Borodin, Mikhail; The ATLAS collaboration; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Vaniachine, Alexandre

    2015-01-01

    The ATLAS experiment at LHC data processing and simulation grows continuously, as more data and more use cases emerge. For data processing the ATLAS experiment adopted the data transformation approach, where software applications transform the input data into outputs. In the ATLAS production system, each data transformation is represented by a task, a collection of many jobs, dynamically submitted by the ATLAS workload management system (PanDA/JEDI) and executed on the Grid, clouds and supercomputers. Patterns in ATLAS data transformation workflows composed of many tasks provided a scalable production system framework for template definitions of the many-tasks workflows. User interface and system logic of these workflows are being implemented in the Database Engine for Tasks (DEFT). Such development required using modern computing technologies and approaches. We report technical details of this development: database implementation, server logic and Web user interface technologies.

  3. Performance Assessment of Product Service System from System Architecture Perspectives

    Directory of Open Access Journals (Sweden)

    John P. T. Mo

    2012-01-01

    Full Text Available New business models in complex engineering products have favoured the integration of acquisition and sustainment phases in capability development. The product service system (PSS concept enables manufacturers of complex engineering products to incorporate support services into the product’s manufacturing and sustainment lifecycle. However, the PSS design has imposed significant risks to the manufacturer not only in the manufacture of the product itself, but also in the provision of support services over long period of time at a predetermined price. This paper analysed three case studies using case study research design approach and mapped the service elements of the case studies to the generic complex engineering product service system (CEPSS model. By establishing the concept of capability distribution for a PSS enterprise, the capability of the CEPSS can be overlaid on the performance-based reward scheme so that decision makers evaluate options related to the business opportunities presented to them.

  4. Viewing hybrid systems as products of control systems and automata

    Science.gov (United States)

    Grossman, R. L.; Larson, R. G.

    1992-01-01

    The purpose of this note is to show how hybrid systems may be modeled as products of nonlinear control systems and finite state automata. By a hybrid system, we mean a network of consisting of continuous, nonlinear control system connected to discrete, finite state automata. Our point of view is that the automata switches between the control systems, and that this switching is a function of the discrete input symbols or letters that it receives. We show how a nonlinear control system may be viewed as a pair consisting of a bialgebra of operators coding the dynamics, and an algebra of observations coding the state space. We also show that a finite automata has a similar representation. A hybrid system is then modeled by taking suitable products of the bialgebras coding the dynamics and the observation algebras coding the state spaces.

  5. Multiscale simulation approach for battery production systems

    CERN Document Server

    Schönemann, Malte

    2017-01-01

    Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.

  6. Natural production of biological optical systems

    Science.gov (United States)

    Choi, Seung Ho; Kim, Young L.

    2015-03-01

    Synthesis and production in nature often provide ideas to design and fabricate advanced biomimetic photonic materials and structures, leading to excellent physical properties and enhanced performance. In addition, the recognition and utilization of natural or biological substances have been typical routes to develop biocompatible and biodegradable materials for medical applications. In this respect, biological lasers utilizing such biomaterials and biostructures have been received considerable attention, given a variety of implications and potentials for bioimaging, biosensing, implantation, and therapy. However, without relying on industrial facilities, eco-friendly massive production of such optical components or systems has not yet been investigated. We show examples of bioproduction of biological lasers using agriculture and fisheries. We anticipate that such approaches will open new possibilities for scalable eco-friendly `green' production of biological photonics components and systems.

  7. The experience of product service systems

    NARCIS (Netherlands)

    Gemser, G.; Kuijken, B.; Wijnberg, N.M.; Van Erp, J.

    2012-01-01

    In this paper, we focus on how to design product service systems (PSS) that provide for coherent user experiences. Our research is part of a large Dutch research program (CRISP, www.crispplatform.nl) on PSS. We propose a framework for identifying real PSS by integrating perspectives from economics a

  8. Entropy Production in Convective Hydrothermal Systems

    Science.gov (United States)

    Boersing, Nele; Wellmann, Florian; Niederau, Jan

    2016-04-01

    Exploring hydrothermal reservoirs requires reliable estimates of subsurface temperatures to delineate favorable locations of boreholes. It is therefore of fundamental and practical importance to understand the thermodynamic behavior of the system in order to predict its performance with numerical studies. To this end, the thermodynamic measure of entropy production is considered as a useful abstraction tool to characterize the convective state of a system since it accounts for dissipative heat processes and gives insight into the system's average behavior in a statistical sense. Solving the underlying conservation principles of a convective hydrothermal system is sensitive to initial conditions and boundary conditions which in turn are prone to uncertain knowledge in subsurface parameters. There exist multiple numerical solutions to the mathematical description of a convective system and the prediction becomes even more challenging as the vigor of convection increases. Thus, the variety of possible modes contained in such highly non-linear problems needs to be quantified. A synthetic study is carried out to simulate fluid flow and heat transfer in a finite porous layer heated from below. Various two-dimensional models are created such that their corresponding Rayleigh numbers lie in a range from the sub-critical linear to the supercritical non-linear regime, that is purely conductive to convection-dominated systems. Entropy production is found to describe the transient evolution of convective processes fairly well and can be used to identify thermodynamic equilibrium. Additionally, varying the aspect ratio for each Rayleigh number shows that the variety of realized convection modes increases with both larger aspect ratio and higher Rayleigh number. This phenomenon is also reflected by an enlarged spread of entropy production for the realized modes. Consequently, the Rayleigh number can be correlated to the magnitude of entropy production. In cases of moderate

  9. Production planning and control of less emitting production systems

    Energy Technology Data Exchange (ETDEWEB)

    Haasis, H.D. [Bremen Univ. (Germany)

    1995-12-31

    The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

  10. Constructed wetlands as biofuel production systems

    Science.gov (United States)

    Liu, Dong; Wu, Xu; Chang, Jie; Gu, Baojing; Min, Yong; Ge, Ying; Shi, Yan; Xue, Hui; Peng, Changhui; Wu, Jianguo

    2012-03-01

    Clean biofuel production is an effective way to mitigate global climate change and energy crisis. Progress has been made in reducing greenhouse-gas (GHG) emissions and nitrogen fertilizer consumption through biofuel production. Here we advocate an alternative approach that efficiently produces cellulosic biofuel and greatly reduces GHG emissions using waste nitrogen through wastewater treatment with constructed wetlands in China. Our combined experimental and literature data demonstrate that the net life-cycle energy output of constructed wetlands is higher than that of corn, soybean, switchgrass, low-input high-diversity grassland and algae systems. Energy output from existing constructed wetlands is ~237% of the input for biofuel production and can be enhanced through optimizing the nitrogen supply, hydrologic flow patterns and plant species selection. Assuming that all waste nitrogen in China could be used by constructed wetlands, biofuel production can account for 6.7% of national gasoline consumption. We also find that constructed wetlands have a greater GHG reduction than the existing biofuel production systems in a full life-cycle analysis. This alternative approach is worth pursuing because of its great potential for straightforward operation, its economic competitiveness and many ecological benefits.

  11. MILK PRODUCTION IN INTEGRATED SYSTEMS: REVIEW

    Directory of Open Access Journals (Sweden)

    H. A. Z. Biavatti

    2014-09-01

    Full Text Available The pasture degradation and thermic stress are in economic trouble for milk producers. The use of silvopastoral system (SSP is an important tool to minimize this loss, since it combines the production and conservation of natural resources, furthermore, provides the producer the potential to diversify the source of income of rural property, it is possible sale or own use of the products generated by the trees as timber, firewood and fruit. With the implementation of the SSP is possible to attenuate the effects of high temperatures caused by direct solar incidence on the animals, providing an ideal thermal comfort zone, resulting in increased production, it will expend less energy so that the animals are able to be as close as possible the necessary thermal comfort. Besides, with the adoption of this system, occurs a minor pasture degradation by promoting the formation of a microclimate favoring their establishment and maintenance, in addition to stabilizing soils, unpacked action of roots and preventing erosion. The purpose of this work was study the main aspects that affect the production of milk, proposing the use of integrated systems to minimize losses from thermal stress and degradation of pastures.

  12. Phospholipid Profile of the Stomach and Duodenum of Normal Rabbits Fed with Supplements of Unripe Pawpaw (Carica papaya) and Unripe Plantain (Musa sapientum) Extract

    Science.gov (United States)

    Eriyamremu, G. E.; Asagba, S. O.; Osagie, V. E.; Ojeaburu, S. I.; Lolodi, O.

    This study reports the effect of unripe pawpaw and/or unripe plantain extracts on the phospholipid profile of the stomach and duodenum of normal rabbits. Supplementation of chow with unripe pawpaw or plantain extract significantly reduced (p< 0.05) the weight gained by rabbits compared with the control. The total phospholipids content in the stomach and duodenum were significantly increased (p< 0.05) in the test groups compared to the control. In the stomach and duodenum, phosphatidylcholine (PC), phosphatidylethanolamine (PE) and sphingomyelin (SGM) were significantly increased (p< 0.05) in the test groups compared to the control. Pawpaw occasioned a decrease in the PE/PC ratio in both tissues as against an increase observed in the SGM/PC ratio. The results presented suggests that unripe pawpaw meal and unripe plantain extract alter the phospholipid profile of the stomach and duodenum in ways which may affect membrane fluidity of these tissues and would have profound effect on the gastro-duodenal mucosa and thus have implication(s) for gastric and duodenal ulcers in rabbits.

  13. Auditing Information System : Delivery Product Service

    Directory of Open Access Journals (Sweden)

    Purwoko Purwoko

    2011-05-01

    Full Text Available Purpose of the research is to ensure the securities of information system asset and to ensure if informa-tion system support the operational and data collected was valid. Research method that used in this research were library studies and field studies. Field studies such an observation, questioner, and inter-view. the expected result are founding the weakness of security management control, operational man-agement control, input control, and output control of risk happened in the company. Conclusion of this research are the system on the company work good and there’s no potential risk happened and make an impact to the delivery process of information system.Index Terms - Auditing Information system, Delivery product process.

  14. Bioelectrochemical Systems for Indirect Biohydrogen Production

    KAUST Repository

    Regan, John M.

    2014-01-01

    Bioelectrochemical systems involve the use of exoelectrogenic (i.e., anode-reducing) microbes to produce current in conjunction with the oxidation of reduced compounds. This current can be used directly for power in a microbial fuel cell, but there are alternate uses of this current. One such alternative is the production of hydrogen in a microbial electrolysis cell (MEC), which accomplishes cathodic proton reduction with a slight applied potential by exploiting the low redox potential produced by exoelectrogens at the anode. As an indirect approach to biohydrogen production, these systems are not subject to the hydrogen yield constraints of fermentative processes and have been proven to work with virtually any biodegradable organic substrate. With continued advancements in reactor design to reduce the system internal resistance, increase the specific surface area for anode biofilm development, and decrease the material costs, MECs may emerge as a viable alternative technology for biohydrogen production. Moreover, these systems can also incorporate other value-added functionalities for applications in waste treatment, desalination, and bioremediation.

  15. Production grid systems and their programming

    CERN Document Server

    Kacsuk, P; Stefan, P

    2004-01-01

    Summary form only given. There are a large variety of grid test-beds that can be used for experimental purposes by a small community. However, the number of production grid systems that can be used as a service for a large community is very limited. The current tutorial provides introduction to three of these very few production grid systems. They represent different models and policies of using grid resources and hence understanding and comparing them is an extremely useful exercise to everyone interested in grid technology. The Hungarian ClusterGrid infrastructure connects clusters during the nights and weekends. These clusters are used during the day for educational purposes at the Hungarian universities and polytechnics. Therefore, a unique feature of this grid is the switching mechanism by which the day time and night time working modes are loaded to the computers. In order to manage the system as a production, one, the system is homogeneous, all the machines should install the same grid software package...

  16. Systems Biology of Microbial Exopolysaccharides Production.

    Science.gov (United States)

    Ates, Ozlem

    2015-01-01

    Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

  17. Systems biology of microbial exopolysaccharides production

    Directory of Open Access Journals (Sweden)

    Ozlem eAtes

    2015-12-01

    Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

  18. An Ideal Production System——Green Synthetic Production System (GSPS)

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Through analyzing LAF system, Green manufacturing s ys tem and other advanced production system, in the paper, put forward a ideal production systemGreen synthetic production system (GSPS).The system can not only agree with the demands of technical progress but also is appropriate to the sustainable strategy of human beings. It absorbed the cream of all advanced production system and "Total Green Management (TGM)", "Total Quality Management (TQM)".An Ideal Production System——Green Synthetic Productio...

  19. Multi-Sensor Aerosol Products Sampling System

    Science.gov (United States)

    Petrenko, M.; Ichoku, C.; Leptoukh, G.

    2011-01-01

    Global and local properties of atmospheric aerosols have been extensively observed and measured using both spaceborne and ground-based instruments, especially during the last decade. Unique properties retrieved by the different instruments contribute to an unprecedented availability of the most complete set of complimentary aerosol measurements ever acquired. However, some of these measurements remain underutilized, largely due to the complexities involved in analyzing them synergistically. To characterize the inconsistencies and bridge the gap that exists between the sensors, we have established a Multi-sensor Aerosol Products Sampling System (MAPSS), which consistently samples and generates the spatial statistics (mean, standard deviation, direction and rate of spatial variation, and spatial correlation coefficient) of aerosol products from multiple spacebome sensors, including MODIS (on Terra and Aqua), MISR, OMI, POLDER, CALIOP, and SeaWiFS. Samples of satellite aerosol products are extracted over Aerosol Robotic Network (AERONET) locations as well as over other locations of interest such as those with available ground-based aerosol observations. In this way, MAPSS enables a direct cross-characterization and data integration between Level-2 aerosol observations from multiple sensors. In addition, the available well-characterized co-located ground-based data provides the basis for the integrated validation of these products. This paper explains the sampling methodology and concepts used in MAPSS, and demonstrates specific examples of using MAPSS for an integrated analysis of multiple aerosol products.

  20. Fully automatic CNC machining production system

    Directory of Open Access Journals (Sweden)

    Lee Jeng-Dao

    2017-01-01

    Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.

  1. Forbs enhance productivity of unfertilised grass-clover leys and support low-carbon bioenergy

    DEFF Research Database (Denmark)

    Cong, Wen-Feng; Jing, Jingying; Rasmussen, Jim

    2017-01-01

    achieved the 60% reduction in GHG emissions compared to fossil fuel, whereas all fertilised mixtures did not meet the 60% reduction target. These findings suggest that including competitive forbs such as plantain in grass-clover mixtures enhances productivity, supporting low-carbon footprint bioenergy...

  2. Late Quaternary Activity and Seismogenic Potential of the Gonave Microplate: Plantain Garden Strike-Slip Fault Zone of Eastern Jamaica

    Science.gov (United States)

    Mann, P.; Prentice, C.; King, W.; Demets, C.; Wiggins-Grandison, M.; Benford, B.

    2008-12-01

    At the longitude of Jamaica, Caribbean (Carib)-North America (Noam) plate motion of 19 ± 2 mm/a is carried by two parallel, left-lateral strike-slip faults, the Oriente fault zone, immediately south of Cuba, and the Enriquillo-Plantain Garden fault zone (EPGFZ), which lies 100-150 km further south. It has been postulated that the lithosphere between these faults constitutes an independent Gonave microplate that has formed in response to the ongoing collision between the leading edge of Carib in Hispaniola and the Bahama carbonate platform. GPS measurements in Jamaica and Hispanola is supportive of the microplate hypothesis and indicates that roughly half of Carib-Noam plate motion (8-14 mm/a) is carried by the EPGFZ of southern Hispaniola and eastern Jamaica. This study applies geomorphic and paleoseismic methods as a direct test of the activity and amount of microplate motion carried on the Plantain Garden fault segment of eastern Hispaniola and how this motion is distributed across a large restraining bend that has formed the island of Jamaica since the late Miocene. The EPFZ curves gently to the northeast and forming a steep mountain front to the Blue Mountains restraining bend with elevations up to 2200 m. Geomorphic fault-related features along the mountain front fault zone include left-laterally deflected rivers and streams, but no small scale features indicative of Holocene activity. River and stream deflections range from 0.1 to 0.5 km. We identified and trenched the most active trace of the mountain front fault at the Morant River where the fault is characterized by a 1.5-m-wide sub-vertical fault zone juxtaposing sheared alluvium and fault Cretaceous basement rocks This section is overlain by a 6-m-thick fluvial terrace. Trenching in the unfaulted terrace immediately overlying the fault trace revealed radiocarbon and OSL ages ranging from 20 to 21 ka that are consistent with a prominent unfaulted alluvial fan along the projection of this fault 1.5 km to

  3. DWPF waste glass Product Composition Control System

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.G.; Postles, R.L.

    1992-07-01

    The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.

  4. DWPF waste glass Product Composition Control System

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.G.; Postles, R.L.

    1992-01-01

    The Defense Waste Processing Facility (DWPF) will be used to blend aqueous radwaste (PHA) with solid radwaste (Sludge) in a waste receipt vessel (the SRAT). The resulting SRAT material is transferred to the SME an there blended with ground glass (Frit) to produce a batch of melter feed slurry. The SME material is passed to a hold tank (the MFT) which is used to continuously feed the DWPF melter. The melter. The melter produces a molten glass wasteform which is poured into stainless steel canisters for cooling and, ultimately, shipment to and storage in a geologic repository. The Product Composition Control System (PCCS) is the system intended to ensure that the melt will be processible and that the glass wasteform will be acceptable. This document provides a description of this system.

  5. 78 FR 68861 - Certain Navigation Products, Including GPS Devices, Navigation and Display Systems, Radar Systems...

    Science.gov (United States)

    2013-11-15

    ... COMMISSION Certain Navigation Products, Including GPS Devices, Navigation and Display Systems, Radar Systems... the United States after importation of certain navigation products, including GPS devices, navigation... products, including GPS devices, navigation and display systems, radar systems, navigational aids,...

  6. Study on commercial HTGR hydrogen production system

    Energy Technology Data Exchange (ETDEWEB)

    Nishihara, Tetsuo [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Hada, Kazuhiko [Japan Atomic Energy Research Inst., Naka, Ibaraki (Japan). Naka Fusion Research Establishment; Nishimura, Kuniyuki [Mitsubishi Research Institute, Tokyo (Japan)

    2000-07-01

    The Japanese energy demand in 2030 will increase up to 117% in comparison with one in 2000. We have to avoid a large consumption of fossil fuel that induces a large CO{sub 2} emission from viewpoint of global warming. Furthermore new energy resources expected to resolve global warming have difficulty to be introduced more because of their low energy density. As a result, nuclear power still has a possibility of large introduction to meet the increasing energy demand. On the other hand, in Japan, 40% of fossil fuels in the primary energy are utilized for power generation, and the remaining are utilized as a heat source. New clean energy is required to reduce the consumption of fossil fuels and hydrogen is expected as a alternative energy resource. Prediction of potential hydrogen demand in Japan is carried out and it is clarified that the demand will potentially increase up to 4% of total primary energy in 2050. In present, steam reforming method is the most economical among hydrogen generation processes and the cost of hydrogen production is about 7 to 8 yen/m{sup 3} in Europe and the United States and about 13 yen/m{sup 3} in Japan. JAERI has proposed for using the HTGR whose maximum core outlet temperature is at 950degC as a heat source in the steam reforming to reduced the consumption of fossil fuels and resulting CO{sub 2} emission. Based on the survey of the production rate and the required thermal energy in conventional industry, it is clarified that a hydrogen production system by the steam reforming is the best process for the commercial HTGR nuclear heat utilization. The HTGR steam reforming system and other candidate nuclear heat utilization systems are considered from viewpoint of system layout and economy. From the results, the hydrogen production cost in the HTGR stream reforming system is expected to be about 13.5 yen/m{sup 3} if the cost of nuclear heat of the HTGR is the same as one of the LWR. (author)

  7. Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hanssen, Ole Joergen

    1997-12-31

    This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

  8. Entanglement property in matrix product spin systems

    Institute of Scientific and Technical Information of China (English)

    ZHU Jing-Min

    2012-01-01

    We study the entanglement property in matrix product spin-ring systems systemically by von Neumann entropy.We find that:(i) the Hilbert space dimension of one spin determines the upper limit of the maximal value of the entanglement entropy of one spin,while for multiparticle entanglement entropy,the upper limit of the maximal value depends on the dimension of the representation matrices.Based on the theory,we can realize the maximum of the entanglement entropy of any spin block by choosing the appropriate control parameter values.(ii) When the entanglement entropy of one spin takes its maximal value,the entanglement entropy of an asymptotically large spin block,i.e. the renormalization group fixed point,is not likely to take its maximal value,and so only the entanglement entropy Sn of a spin block that varies with size n can fully characterize the spin-ring entanglement feature.Finally,we give the entanglement dynamics,i.e.the Hamiltonian of the matrix product system.

  9. A TWO-PRODUCT INVENTORY SYSTEM WITH PRODUCT INTERACTION

    Directory of Open Access Journals (Sweden)

    J. Yadavalli

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: In this paper, we study a two-component continuous review inventory system. We assume that demand occurs according to a Poisson process and that a demand can be satisfied only if both the components are available in the inventory. Back-orders are not permitted. We assume that the lead-time distribution of one product is arbitrary and the other is exponential. Identifying the underlying process as a semi-regeneration process we find the stationary distribution of the inventory level, the performance measures such as mean stationary rate of number of lost demands, the demands and the reorders made. A numerical example illustrates the results.

    AFRIKAANSE OPSOMMING: Die artikel ondersoek 'n tweekomponent- deurlopende oorsigvoorraadstelsel. Daar word aanvaar dat aanvraag 'n Poissonproses is en dat aanvraag slegs bevredig kan word indien beide die komponente in die voorraad beskikbaar is. Agterstallige bestellings word nie toegelaat nie. Daar word aanvaar dat die lewertydverdeling van die een produk arbitrêr en die ander eksponensieël is. Indien die onderliggende proses as 'n semigenerasieproses geïdentifiseer word, kan die stasionêre verspreiding van die voorraadvlak bepaal word. Maatstawwe van vertoning soos mediaan- stasionêre koers van die hoeveelheid verlore aanvraag, die aanvraag en herbestellings wat gedoen is word bepaal. 'n Numeriese voorbeeld illustreer die resultate.

  10. Information Systems Security Products and Services Catalogue.

    Science.gov (United States)

    1992-01-01

    Guardian -90 Trusted XENIX Trusted XENIX running on 286/386 Clones A Series OS 1100 OS 1100/2200 Release SB3R6 VSLAN 5.0 SVS/OS CAP 1.0...486-6579 William J. Buer (408) 725-6000 Product Description Security Enhanced VMS - C/B Guardian -90 - C 4-2b.2 III. Network Systems and Network... Diablo 630 HP LaserJet + (HP-PCL) HP 7475A Plotter (HP-GL) Memory: 2MB RAM (3MB RAM optional), 1MB ROM Paper Size: Letter, Legal, A4, envelopes

  11. Co amorphous systems: A product development perspective.

    Science.gov (United States)

    Chavan, Rahul B; Thipparaboina, Rajesh; Kumar, Dinesh; Shastri, Nalini R

    2016-12-30

    Solubility is one of the major problems associated with most of the new chemical entities that can be reasonably addressed by drug amorphization. However, being a high-energy form, it usually tends to re-crystallize, necessitating new formulation strategies to stabilize amorphous drugs. Polymeric amorphous solid dispersion (PASD) is one of the widely investigated strategies to stabilize amorphous drug, with major limitations like limited polymer solubility and hygroscopicity. Co amorphous system (CAM), a new entrant in amorphous arena is a promising alternative to PASD. CAMs are multi component single phase amorphous solid systems made up of two or more small molecules that may be a combination of drugs or drug and excipients. Excipients explored for CAM preparation include amino acids, carboxylic acids, nicotinamide and saccharine. Advantages offered by CAM include improved aqueous solubility and physical stability of amorphous drug, with a potential to improve therapeutic efficacy. This review attempts to address different aspects in the development of CAM as drug products. Criterion for co-former selection, various methods involved in CAM preparation, characterization tools, stability, scale up and regulatory requirements for the CAM product development are discussed.

  12. Systems biology solutions for biochemical production challenges

    DEFF Research Database (Denmark)

    Hansen, Anne Sofie Lærke; Lennen, Rebecca M; Sonnenschein, Nikolaus

    2017-01-01

    There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics character......There is an urgent need to significantly accelerate the development of microbial cell factories to produce fuels and chemicals from renewable feedstocks in order to facilitate the transition to a biobased society. Methods commonly used within the field of systems biology including omics...... characterization, genome-scale metabolic modeling, and adaptive laboratory evolution can be readily deployed in metabolic engineering projects. However, high performance strains usually carry tens of genetic modifications and need to operate in challenging environmental conditions. This additional complexity...... compared to basic science research requires pushing systems biology strategies to their limits and often spurs innovative developments that benefit fields outside metabolic engineering. Here we survey recent advanced applications of systems biology methods in engineering microbial production strains...

  13. Automotive technology. ; Production engineering and production system. Jidosha gijutsu. ; Seisan gijutsuter dot system

    Energy Technology Data Exchange (ETDEWEB)

    Miki, T. (Daihatsu Motor Co. Ltd., Osaka (Japan))

    1990-07-01

    Japanese automotive industry grew stably through the year of 1989, sustained by favorable domestic demands, and recorded the historically highest production of 13.03 million cars (2.6% up compared with the previous year). Also, newly-designed cars appeared on the market successively, aiming at improving the marketability of automobiles. In the aspect of production engineering, in order to meet the users' needs and preferences, the use of aluminum and plastic materials for car bodies and the application of engineering plastics to such functional parts as intake manifolds and springs have advanced, and the technology of precision mechanical work, forging, sintering and the like for high strength materials has also progressed. Moreover, the application of surface treated steel sheets and plastics for preventing rust as well as plastic painting matching with car designs has increased. In respect of production lines, as the variety of car types has increased corresponding to the diversified users' preferences, utilization of the flexible manufacturing system, which can readily change the types of cars on the production line, has spread extensively so as to improve the efficiency of mixed production lines. Also being pursued is computer-integrated manufacturing (CIM) as a production marketing integrated system to reduce the lead time for production. 26 refs.

  14. Innovation of food production systems : product quality and consumer acceptance

    NARCIS (Netherlands)

    Jongen, W.M.F.; Meulenberg, M.T.G.

    1998-01-01

    he quality of food products, as perceived by consumers, is a main driving force behind today's innovations in the food industry. Product development represents large investments of companies both in money and human resources and has to be accomplished in a highly competitive market situation. Conseq

  15. Effect of Mixed Systems on Crop Productivity

    Science.gov (United States)

    Senturklu, Songul; Landblom, Douglas; Cihacek, Larry; Brevik, Eric

    2017-04-01

    The goals of this non-irrigated research has been to determine the effect of mixed systems integration on crop, soil, and beef cattle production in the northern Great Plains region of the United States. Over a 5-year period, growing spring wheat (HRSW-C) continuously year after year was compared to a 5-year crop rotation that included spring wheat (HRSW-R), cover crop (dual crop consisting of winter triticale/hairy vetch seeded in the fall and harvested for hay followed by a 7-species cover crop that was seeded in June after hay harvest), forage corn, field pea/barley, and sunflower. Control 5-year HRSW yield was 2690 kg/ha compared to 2757 kg/ha for HRSW grown in rotation. Available soil nitrogen (N) is often the most important limitation for crop production. Expensive fertilizer inputs were reduced in this study due to the mixed system's complementarity in which the rotation system that included beef cattle grazing sustained N availability and increased nutrient cycling, which had a positive effect on all crops grown in the rotation. Growing HRSW continuously requires less intensive management and in this research was 14.5% less profitable. Whereas, when crop management increased and complementing crops were grown in rotation to produce crops and provide feed for grazing livestock, soil nutrient cycling improved. Increased nutrient cycling increased crop rotation yields and yearling beef cattle steers that grazing annual forages in the rotation gain more body weight than similar steers grazing NGP native range. Results of this long-term research will be presented in a PICO format for participant discussion.

  16. Biomass Production System (BPS) Plant Growth Unit

    Science.gov (United States)

    Morrow, R. C.; Crabb, T. M.

    The Biomass Production System (BPS) was developed under the Small Business Innovative Research (SBIR) program to meet science, biotechnology and commercial plant growth needs in the Space Station era. The BPS is equivalent in size to a double middeck locker, but uses it's own custom enclosure with a slide out structure to which internal components mount. The BPS contains four internal growth chambers, each with a growing volume of more than 4 liters. Each of the growth chambers has active nutrient delivery, and independent control of temperature, humidity, lighting, and CO2 set-points. Temperature control is achieved using a thermoelectric heat exchanger system. Humidity control is achieved using a heat exchanger with a porous interface which can both humidify and dehumidify. The control software utilizes fuzzy logic for nonlinear, coupled temperature and humidity control. The fluorescent lighting system can be dimmed to provide a range of light levels. CO2 levels are controlled by injecting pure CO2 to the system based on input from an infrared gas analyzer. The unit currently does not scrub CO2, but has been designed to accept scrubber cartridges. In addition to providing environmental control, a number of features are included to facilitate science. The BPS chambers are sealed to allow CO2 and water vapor exchange measurements. The plant chambers can be removed to allow manipulation or sampling of specimens, and each chamber has gas/fluid sample ports. A video camera is provided for each chamber, and frame-grabs and complete environmental data for all science and hardware system sensors are stored on an internal hard drive. Data files can also be transferred to 3.5-inch disks using the front panel disk drive

  17. Simulation Based Optimization for World Line Card Production System

    Directory of Open Access Journals (Sweden)

    Sinan APAK

    2012-07-01

    Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

  18. Modelling production system architectures in the early phases of product development

    DEFF Research Database (Denmark)

    Guðlaugsson, Tómas Vignir; Martin Ravn, Poul; Mortensen, Niels Henrik;

    2016-01-01

    on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...... and adjusted to fit the modelling requirements of a production system architecture at an early phase of development. The production system architecture models capture and describe the structure, capabilities and expansions of the production system architecture underdevelopment. The production system...

  19. National Strategy for Modernizing the Regulatory System for Biotechnology Products

    Science.gov (United States)

    This National Strategy for Modernizing the Regulatory System for Biotechnology Products sets forth a vision for ensuring that the federal regulatory system is prepared to efficiently assess the risks, if any, of the future products of biotechnology.

  20. Turbomachinery systems for floating production applications

    Energy Technology Data Exchange (ETDEWEB)

    Windt, Jonathan P.; Kurz, Rainer [Solar Turbines Incorporated, San Diego, CA (United States)

    2008-07-01

    Since 1995 there has been a dramatic increase in oil and gas exploration and production using floating platforms in deeper waters located further offshore. This exploration started with tension leg platforms, progressed through SPARs and Semi-Submersibles, and later evolved into Floating Production Storage and Offloading (FPSO) vessels. Turbomachinery equipment installed on a floating platform or vessel will be expected to operate in the same manner as a land based machine, but in a variety of climate and environmental conditions that now includes motion. To operate successfully, specific design considerations for the turbo-machinery packages are required. It is critical to take into account the type of vessel, the expected list, trim and dynamic motion angles, the dynamic forces applied, the expected deck deflection as a result of those forces, understand the applicable class requirement, and where the equipment will be located on the vessel. This information is then translated into the design conditions to determine the type of mounting method to be used to attach the turbo-machinery package to the deck, the expected accelerations for structural analysis, and oil tank and system designs for fluid management. Furthermore, compressor designs need to allow utmost flexibility to adapt to changing operating conditions. (author)

  1. System for extracting protein from a fermentation product

    Science.gov (United States)

    Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

    2016-04-26

    A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

  2. Ameliorative potentials of cocoyam (Colocasia esculenta L.) and unripe plantain (Musa paradisiacal L.) on renal and liver growth in streptozotocin induced diabetic rats

    Institute of Scientific and Technical Information of China (English)

    Eleazu CO; Iroaganachi M; Eleazu KC

    2013-01-01

    Objective:To investigate the ameliorating potentials of cocoyam(Colocasia esculenta(C. esculenta)L.) and unripe plantain(Musa paradisiacae(M. paradisiacae)L.) incorporated feeds on renal and liver growth ofSTZ induced rats.Method:The blood glucose level of all the rats was measured with a glucometer, the protein and glucose levels in the urine samples of the rats were determined using urine assay strips while the specific gravity of the urine samples of all the rats was determined with a urinometer.The assay of the proximate, phytochemical, mineral composition as well as screening for antioxidant activity of the test feeds was carried out using standard techniques.Results:The administration of the test feeds to the diabetic rats in58.75% and38.13% decreases in their hyperglycemia with a corresponding amelioration of their elevated urinary protein, glucose, specific gravity as well as renal and kidney growths.Administration of the cocoyam incorporated feeds to the diabetic rats of group4, resulted in2.71% increase in body weight with a corresponding19.52% increase in growth rate unlike the diabetic rats of group 5, administered unripe plantain feed that had5.12% decrease in weight with a corresponding 29.52% decrease in growth rate but higher than the diabetic control rats that recorded28.69% and 29.46% decreases in body weights with a corresponding248.9% and250.14% decreases in growth rates.Analysis revealed that the test feeds contained low quantities of moisture but significant quantities of crude fibre, proteins, lipids, carbohydrates, ash, alkaloids, flavonoids, saponins, tannins, calcium, magnesium, potassium, iron, zinc, phosphorous as well as considerable amount of energy.In addition, the cocoyam incorporated feeds contained higher quantities of flavonoids, saponin, tannin,Ca,Mg,Fe,Zn,K,P, crude fibre as well as antioxidant activity but lower quantities of alkaloids than the unripe plantain feed.Conclusion:The use of cocoyam and unripe plantain flours in the

  3. Impact of BSE on livestock production system.

    Science.gov (United States)

    Nardone, A

    2003-09-01

    The small number of BSE cases diagnosed in Italy from January 2001 to 12 September 2001 (a total of 28, one every 9000 head) does not allow for a statistical analysis of the relationship between this disease and the livestock systems. However, some indications can be noted: (a) only dairy cattle, which represent three-quarters of the cattle raised in Italy, are involved; (b) 58% of the cases belong to medium-large farms that breed 27% of all head; (c) 13 out of 28 cases are 5-year-old animals and 26 out of 28 are between 5 and 7 years of age; (d) 15 of 28 cases come from Lombardia, where 27% of Italian dairy cattle are raised. The following factors may have affected the livestock system: (1) trends of beef meat consumption; (2) changes in livestock management; (3) changes in animal feeding; (4) possible effects on selection. A strong decline in beef meat consumption (4 kg/year) has been observed in the UK and other European countries since 1996 (the year of the discovery of the relationship between BSE and nvCJD). In Italy, from January 2001 the consumption of beef meat has declined as well as slaughter: a drop of 31% in the total slaughtered head in the period January-February, a drop of 14% in January-May. A fall in the price of calves has promoted, in some dairy farms, the start of the production of light beef less than one year old (advantages in the marketing of meat favour this initiative), a phenomenon which is not yet well established. Traceability and certification of meat have improved, thanks to breeders' associations and interprofessional agreements. The breeders associations have also started insurance initiatives against BSE risks. In Italy the employment of plant protein meals would increase the total feedstuff consumption by about 7%. Direct effects of BSE could slow down the genetic progress (GP) of cattle populations within breed and country. Indirect effects on GP may also happen as a consequence of an increase in the replacement rate (rr). This

  4. Integrated Ceramic Membrane System for Hydrogen Production

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, Joseph; Lim, Hankwon; Drnevich, Raymond

    2010-08-05

    Phase I was a technoeconomic feasibility study that defined the process scheme for the integrated ceramic membrane system for hydrogen production and determined the plan for Phase II. The hydrogen production system is comprised of an oxygen transport membrane (OTM) and a hydrogen transport membrane (HTM). Two process options were evaluated: 1) Integrated OTM-HTM reactor – in this configuration, the HTM was a ceramic proton conductor operating at temperatures up to 900°C, and 2) Sequential OTM and HTM reactors – in this configuration, the HTM was assumed to be a Pd alloy operating at less than 600°C. The analysis suggested that there are no technical issues related to either system that cannot be managed. The process with the sequential reactors was found to be more efficient, less expensive, and more likely to be commercialized in a shorter time than the single reactor. Therefore, Phase II focused on the sequential reactor system, specifically, the second stage, or the HTM portion. Work on the OTM portion was conducted in a separate program. Phase IIA began in February 2003. Candidate substrate materials and alloys were identified and porous ceramic tubes were produced and coated with Pd. Much effort was made to develop porous substrates with reasonable pore sizes suitable for Pd alloy coating. The second generation of tubes showed some improvement in pore size control, but this was not enough to get a viable membrane. Further improvements were made to the porous ceramic tube manufacturing process. When a support tube was successfully coated, the membrane was tested to determine the hydrogen flux. The results from all these tests were used to update the technoeconomic analysis from Phase I to confirm that the sequential membrane reactor system can potentially be a low-cost hydrogen supply option when using an existing membrane on a larger scale. Phase IIB began in October 2004 and focused on demonstrating an integrated HTM/water gas shift (WGS) reactor to

  5. Introduction of China's Compulsory Product Certification System (Ⅰ)

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    @@ Why does China establish a new Compulso-ry Product Certification System? For a long time, our compulsory product certification system has had problems such as lack of a unified management department, repeated assessments,repeated charging and no separation between certification activities and behaviors of law enforcement.The most obvious problem is that two certification management systems exist respectively for domestic products and imported products.

  6. A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

    OpenAIRE

    De Araujo, Luciano Fonseca; De Queiroz, Abelardo Alves

    2010-01-01

    International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

  7. Production planning systems for cellular manufacturing

    NARCIS (Netherlands)

    Riezebos, J.

    1998-01-01

    New product development is one of the most powerful but difficult activities in business. It is also a very important factor affecting final product quality. There are many techniques available for new product development. Experimental design is now regarded as one of the most significant techniques

  8. Analysis of a New Type of Production System

    Institute of Scientific and Technical Information of China (English)

    王永县; 赵晓波; 王建才

    2003-01-01

    Previous work studied a production system including multiple stations (or workshops) consisting of an entry station, a set of workstations, an exit station, and a central station, which could be arranged in any configuration. The central station was introduced into the production system to relax the environment. In this paper, the central station is eliminated. The entry station and all workstations have limited local buffers. A workstation can choose either a buffer or a kanban mechanism to control its work-in-process (WIP). The production system was modeled as a queueing network with blocking in a general configuration. A symmetrical decomposition approach was developed to analyze the production system. The simulation result shows that the decomposition approach works well. Comparison of the new production systems with modified production systems having a common buffer shows that the key for implementing just-in-time production systems is to reduce the uncertainty.

  9. Efectos de dos sistemas de producción en el contenido de minerales en el fruto de Musa AAB Simmonds Effects of two production systems in the mineral content in the fruit of Musa AAB Simmonds

    Directory of Open Access Journals (Sweden)

    José Luis Barrera-Violeth

    2011-12-01

    Full Text Available Los sistemas de producción orgánico y/o ecológico tienen como objetivo garantizar la sostenibilidad y la renovación de base natural, mediante la limitación del uso de productos de síntesis química para favorecer el ambiente y la salud humana. Teniendo en cuenta estas características, se estudió el efecto de los sistemas de producción orgánico y convencional sobre el contenido de nutrientes minerales del fruto del plátano Hartón (Musa AAB Simmonds, durante el proceso de maduración. Las determinaciones se realizaron en la Universidad de Córdoba (Montería, Colombia con el fin de establecer las diferencias en el contenido de minerales en los frutos en ambos sistemas y en diferentes estados de maduración. Se utilizó un diseño completamente al azar con arreglo factorial 2 x 5 y cinco repeticiones. Los factores fueron: sistema de producción y estado de maduración; los cinco niveles del segundo factor correspondieron a los grados de maduración: verde-oscuro (V, verde-claro (VC, amarillo-verde (AV, amarillo (A y muy amarillo (MA. Los resultados obtenidos muestran que entre ambos sistemas de producción y en distintos grados de maduración, se presentan diferencias significativas (P Organic production systems and/or ecological aim to ensure the sustainability and renewal of natural base by limiting chemical synthesis products favoring the environment and human health due to these benefits, we studied the effect of systems organic and conventional production on mineral nutrient content of the fruit of plantain (Musa AAB Simmonds during the ripening process. Measurements were performed at the University of Córdoba (Montería, Colombia in order to differentiate between the two systems, in varying states of maturity. A complete randomized design with 2 x 5 factorial arrangements with five replications was used. The factors were: production system and state of maturity, the five levels of the second factor corresponded to the following

  10. Integrable systems and symmetric products of curves

    CERN Document Server

    Vanhaecke, P

    1994-01-01

    show how there is associated to each non-constant polynomial F(x,y) a completely integrable system with polynomial invariants on \\Rd and on \\C{2d} for each d\\geq1; in fact the invariants are not only in involution for one Poisson bracket, but for a large class of polynomial Poisson brackets, indexed by the family of polynomials in two variables. We show that the complex invariant manifolds are isomorphic to affine parts of d-fold symmetric products of a deformation of the algebraic curve F(x,y)=0, and derive the structure of the real invariant manifolds from it. We also exhibit Lax equations for the hyperelliptic case (i.e., when F(x,y) is of the form y^2+f(x)) and we show that in this case the invariant manifolds are affine parts of distinguished (non-linear) subvarieties of the Jacobians of the curves. As an application the geometry of the H\\'enon-Heiles hierarchy --- a family of superimposable integrable polynomial potentials on the plane --- is revealed and Lax equations for the hierarchy are given.

  11. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...... design. This research contributes to the vocabulary and understanding of the architecture phenomenon. A conceptual framework is provided which allows for conceptualization of the architecture phenomenon, and how it applies within production system design. To aid the companies in the operational design...... and handling of production system architecture, research is conducted into the description of production system architecture, including what an architecture description contains in general and what it should describe for production systems specifically. The contribution in this area of research consists...

  12. Modeling of Agile Intelligent Manufacturing-oriented Production Scheduling System

    Institute of Scientific and Technical Information of China (English)

    Zhong-Qi Sheng; Chang-Ping Tang; Ci-Xing Lv

    2010-01-01

    Agile intelligent manufacturing is one of the new manufacturing paradigms that adapt to the fierce globalizing market competition and meet the survival needs of the enterprises, in which the management and control of the production system have surpassed the scope of individual enterprise and embodied some new features including complexity, dynamicity, distributivity, and compatibility. The agile intelligent manufacturing paradigm calls for a production scheduling system that can support the cooperation among various production sectors, the distribution of various resources to achieve rational organization, scheduling and management of production activities. This paper uses multi-agents technology to build an agile intelligent manufacturing-oriented production scheduling system. Using the hybrid modeling method, the resources and functions of production system are encapsulated, and the agent-based production system model is established. A production scheduling-oriented multi-agents architecture is constructed and a multi-agents reference model is given in this paper.

  13. Glycemic Responses, Glycemic Index, and Glycemic Load Values of Some Street Foods Prepared from Plantain (Musa spp., AAB Genome in Côte d’Ivoire

    Directory of Open Access Journals (Sweden)

    Camille Adam Kouamé

    2017-09-01

    Full Text Available The glycemic index (GI and glycemic load (GL of four culinary preferences including five local street dishes prepared from three varieties of plantain at different maturity stages was determined. The GI was obtained following ISO/FDI 26642:2010 protocol, and the GL was calculated from test foods’ GI, considering the amount of available carbohydrate in the traditional portion size. GI values were 44 for Klaclo (with Ameletiha variety at all black stage, 39 for Aloco (with Agnrin variety at full yellow stage, 39 for Aloco (with Agnrin variety at full yellow with black spots stage; 45 for Chips (with Ameletiha variety at green stage and 89 for Banane braisée (with Afoto variety at light green stage. GI values were inversely correlated with the total sugar and carbohydrate in foods (p < 0.01, and no relationship existed between the GI values and the amount of protein (p = 0.89. Except for Chips (GL = 12, the GLs of the others foods were high (GL > 20. Contrary to Banane braisée, the consumption of Klaclo, Aloco, and Chips may promote the control of postprandial glucose response. Data provides the first GI published values of plantain-based foods commonly consumed in the urban area of Abidjan (Côte d’Ivoire.

  14. Production Systems for the Muslim Goat's Meat Market

    African Journals Online (AJOL)

    1Norwegian Agricultural Economics Research Institute ... This paper investigates economic feasible production systems in agriculture to meet the ... Halal products such as pizzas, sausages and hamburgers, takes place ... Key words: Goat's meat; Norway; Production systems; Halal meat; Muslims; Mountain range pastures;.

  15. Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

    NARCIS (Netherlands)

    Alblas, A.A.; Wortmann, J.C.

    2012-01-01

    The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

  16. Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

    NARCIS (Netherlands)

    Alblas, A.A.; Wortmann, J.C.

    2012-01-01

    The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later s

  17. Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

    Science.gov (United States)

    Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

    2011-01-01

    Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

  18. The Reconfiguration of Service Production Systems in Response to Offshoring

    DEFF Research Database (Denmark)

    Brandl, Kristin; Mol, Michael J.; Petersen, Bent

    2017-01-01

    of a service production system in response to change ignited by offshoring. The authors find recurring effects between structures that enable and constrain agents and agents who shape the structure of the production system. Research limitations/implications: The paper offers a novel contribution to the service......Service production systems have the ability to self-correct any changes inflicted through offshoring of the systems, which helps firms that offshore.Originality/valueThe paper is aimed at service professionals and offshoring managers and proposes a novel presentation of the service production system...

  19. Development of anti-counterfeit consumer product authentication system

    Directory of Open Access Journals (Sweden)

    Olena V. Narimanova

    2015-06-01

    Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

  20. Underlying Factors for Practicality of the Production Control Systems

    DEFF Research Database (Denmark)

    Arica, Emrah; Strandhagen, Jan Ola; Hvolby, Hans-Henrik

    2012-01-01

    This paper gives indications to important factors that must be considered for effectiveness of the production control systems under uncertainty. Five key factors have been identified by the literature study. Production schedule generation and execution approach under uncertainty, information...

  1. Soil quality assessment in rice production systems

    NARCIS (Netherlands)

    Rodrigues de Lima, A.C.

    2007-01-01

    In the state of Rio Grande do Sul, Brazil, rice production is one of the most important regional activities. Farmers are concerned that the land use practices for rice production in the Camaquã region may not be sustainable because of detrimental effects on soil quality. The study presented in this

  2. Soil quality assessment in rice production systems

    NARCIS (Netherlands)

    Rodrigues de Lima, A.C.

    2007-01-01

    In the state of Rio Grande do Sul, Brazil, rice production is one of the most important regional activities. Farmers are concerned that the land use practices for rice production in the Camaquã region may not be sustainable because of detrimental effects on soil quality. The study presented in this

  3. The CMS Monte Carlo Production System: Development and Design

    Energy Technology Data Exchange (ETDEWEB)

    Evans, D. [Fermi National Accelerator Laboratory, Batavia, IL (United States)], E-mail: evansde@fnal.gov; Fanfani, A. [Universita degli Studi di Bologna and INFN Sezione di Bologna, Bologna (Italy); Kavka, C. [INFN Sezione di Trieste, Trieste (Italy); Lingen, F. van [California Institute of Technology, Pasadena, CA (United States); Eulisse, G. [Northeastern University, Boston, MA (United States); Bacchi, W.; Codispoti, G. [Universita degli Studi di Bologna and INFN Sezione di Bologna, Bologna (Italy); Mason, D. [Fermi National Accelerator Laboratory, Batavia, IL (United States); De Filippis, N. [INFN Sezione di Bari, Bari (Italy); Hernandez, J.M. [Centro de Investigaciones Energeticas, Medioambientales y Tecnologicas, Madrid (Spain); Elmer, P. [Princeton University, Princeton, NJ (United States)

    2008-03-15

    The CMS production system has undergone a major architectural upgrade from its predecessor, with the goal of reducing the operational manpower needed and preparing for the large scale production required by the CMS physics plan. The new production system is a tiered architecture that facilitates robust and distributed production request processing and takes advantage of the multiple Grid and farm resources available to the CMS experiment.

  4. The CMS Monte Carlo Production System Development and Design

    CERN Document Server

    Evans, D; Kavka, C; Van Lingen, F; Eulisse, G; Bacchi, W; Codispoti, G; Mason, D; De Filippis, N; Hernandez J M; Elmer, P

    2008-01-01

    The CMS production system has undergone a major architectural upgrade from its predecessor, with the goal of reducing the operational manpower needed and preparing for the large scale production required by the CMS physics plan. The new production system is a tiered architecture that facilitates robust and distributed production request processing and takes advantage of the multiple Grid and farm resources available to the CMS experiment.

  5. Toyota production system - one example to shipbuilding industry

    Directory of Open Access Journals (Sweden)

    Delmo Alves de Moura

    2017-09-01

    Full Text Available The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line context, it amounts to striving for economies of scope, rather than economies of scale ideally serving ever smaller niche markets, even quantities of one, without the high cost traditionally associated with customization. A lean company may be thought of as a very productive and cost efficient producer of goods or services.

  6. KMS states on Nica-Toeplitz algebras of product systems

    DEFF Research Database (Denmark)

    Hong, Jeong Hee; Larsen, Nadia S.; Szymanski, Wojciech

    2012-01-01

    system of finite type is introduced. If (G, P) is a lattice ordered group and X is a product system of finite type over P satisfying certain coherence properties, we construct KMS_beta states of NT(X) associated to a scalar dynamics from traces on the coefficient algebra of the product system. Our...

  7. A New Mathematical Modeling Technique for Pull Production Control Systems

    Directory of Open Access Journals (Sweden)

    O. Srikanth

    2013-12-01

    Full Text Available The Kanban Control System widely used to control the release of parts of multistage manufacturing system operating under a pull production control system. Most of the work on Kanban Control System deals with multi-product manufacturing system. In this paper, we are proposing a regression modeling technique in a multistage manufacturing system is to be coordinates the release of parts into each stage of the system with the arrival of customer demands for final products. And also comparing two variants stages of the Kanban Control System model and combines with mathematical and Simulink model for the production coordination of parts in an assembly manufacturing systems. In both variants, the production of a new subassembly is authorized only when an assembly Kanban is available. Assembly kanbans become available when finished product is consumed. A simulation environment for the product line system has to generate with the proposed model and the mathematical model have to give implementation against the simulation model in the working platform of MATLAB. Both the simulation and model outputs have provided an in depth analysis of each of the resulting control system for offering model of a product line system.

  8. Customized Pull Systems for Single-Product Flow Lines

    NARCIS (Netherlands)

    Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

    1998-01-01

    Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

  9. Designing pull production control systems : Customization and robustness

    NARCIS (Netherlands)

    Gaury, E.G.A.

    2000-01-01

    In this dissertation we address the issues of selecting and configuring pull production control systems for single-product flowlines. We start with a review of pull systems in the literature, yielding a new classification. Then we propose a novel selection procedure based on a generic system that we

  10. Energy yields in intensive and extensive biomass production systems

    NARCIS (Netherlands)

    Nonhebel, S.

    2002-01-01

    As for agricultural crops, biomass crops can be grown in intensive production systems (external inputs such as pesticides and artificial fertilisers) or extensive systems with few external inputs. The choice between an intensive or extensive production system has consequences for yields. A method is

  11. Customized Pull Systems for Single-Product Flow Lines

    NARCIS (Netherlands)

    Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

    1998-01-01

    Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

  12. Product configuration of infra structure systems for data centres

    DEFF Research Database (Denmark)

    Hvam, Lars; Christensen, Tim Teglgaard; Jensen, Søren Brogaard

    2007-01-01

    This article describes how American Power Conversion (APC), a company in the electronics industry, has used product configuration systems as a central part of the company’s mass customisation strategy. APC sells, designs, produce, delivers, and installs large complex infrastructure systems for data...... centres, and components and systems for these systems. At the heart of its mass customisation strategy are a module-based product range and the use of product configuration systems for sales and order processing. In addition, the company has implemented a manufacturing concept, which involves the mass...... to 16 days. Also, production costs were significantly reduced. The use of product configuration systems also supports a widely distributed process of selling APC’s products via more than 10,000 sales associates and dealers worldwide. At the same time, the company’s capability for introducing new...

  13. Excess entropy production in quantum system: Quantum master equation approach

    OpenAIRE

    Nakajima, Satoshi; Tokura, Yasuhiro

    2016-01-01

    For open systems described by the quantum master equation (QME), we investigate the excess entropy production under quasistatic operations between nonequilibrium steady states. The average entropy production is composed of the time integral of the instantaneous steady entropy production rate and the excess entropy production. We define average entropy production rate using the average energy and particle currents, which are calculated by using the full counting statistics with QME. The excess...

  14. Methods and systems for chemoautotrophic production of organic compounds

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Curt R.; Che, Austin J.; Shetty, Reshma P.; Kelly, Jason R.

    2013-01-08

    The present disclosure identifies pathways, mechanisms, systems and methods to confer chemoautotrophic production of carbon-based products of interest, such as sugars, alcohols, chemicals, amino acids, polymers, fatty acids and their derivatives, hydrocarbons, isoprenoids, and intermediates thereof, in organisms such that these organisms efficiently convert inorganic carbon to organic carbon-based products of interest using inorganic energy, such as formate, and in particular the use of organisms for the commercial production of various carbon-based products of interest.

  15. Product-Oriented Environmental Management: : A System for Product Environmental Performance Communication

    OpenAIRE

    de Lima Ottoni, Frederico

    2010-01-01

    This project is an action research study which presents the development of a system for product environmental performance internal communication for the Atlas Copco Tools AB scenario. The study is based on the study of available literature upon product-oriented environmental management systems and the European Integrated Product Policy scheme. Through the analysis of the literature and the scenario in study, a concept for integrated product environmental performance communication from the pro...

  16. Deep primary production in coastal pelagic systems

    DEFF Research Database (Denmark)

    Lyngsgaard, Maren Moltke; Richardson, Katherine; Markager, Stiig

    2014-01-01

    produced. The primary production (PP) occurring below the surface layer, i.e. in the pycnocline-bottom layer (PBL), is shown to contribute significantly to total PP. Oxygen concentrations in the PBL are shown to correlate significantly with the deep primary production (DPP) as well as with salinity...... that eutrophication effects may include changes in the structure of planktonic food webs and element cycling in the water column, both brought about through an altered vertical distribution of PP....

  17. Embedded systems engineering for products and services design.

    Science.gov (United States)

    Ahram, Tareq Z; Karwowski, Waldemar; Soares, Marcelo M

    2012-01-01

    Systems engineering (SE) professionals strive to develop new techniques to enhance the value of contributions to multidisciplinary smart product design teams. Products and services designers challenge themselves to search beyond the traditional design concept of addressing the physical, social, and cognitive factors. This paper covers the application of embedded user-centered systems engineering design practices into work processes based on the ISO 13407 framework [20] to support smart systems and services design and development. As practitioners collaborate to investigate alternative smart product designs, they concentrate on creating valuable products which will enhance positive interaction. This paper capitalizes on the need to follow a user-centered SE approach to smart products design [4, 22]. Products and systems intelligence should embrace a positive approach to user-centered design while improving our understanding of usable value-adding, experience and extending our knowledge of what inspires others to design enjoyable services and products.

  18. Boko Haram: A Systemic and Strategic Analysis

    Science.gov (United States)

    2016-06-01

    groups.6 These centralized states all claimed different historical origins, some of them likely mythical and some likely based on more concrete ...with the author, 2 August 2015. 139 “Nigerian Army,” GlobalSecurity.org, Last modified , March 6, 2014, http://www.globalsecurity.org/military/world...animal husbandry, and plantains provided significant wealth. These food products combined with cotton, timber, and rubber production provided the

  19. New design competences for localized production systems

    DEFF Research Database (Denmark)

    Eriksen, Kaare Riise; Morelli, Nicola

    2005-01-01

    This paper discusses the current development in production culture, based on local production networks. The role of the designer is put in perspective and outlined through a research project, Den Grønne Møbel (DGM), where different design areas were coordinated in a business concept...... and an organization involving different stakeholders. For several years now, DGM has been producing furniture from local materials, hereby aiming to create a new culture for well designed and environmentally sound furniture with a ‘story’. Although not totally new, this organizational model is particularly innovative...... in fully industrialized countries such as Denmark and represents an interesting alternative to globalized industrial production. Furthermore this case is an interesting opportunity to re-discuss the role and competences of designers in such new models. Tools and methods of the design profession...

  20. MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

    Directory of Open Access Journals (Sweden)

    V. A. Golybin

    2015-01-01

    Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

  1. Model-based optimization of production systems

    OpenAIRE

    2015-01-01

    Gas lifted method is one of the artificial lift technique used in the oil and gas industry.This method is applied most in oil well to improve the oil recovery by lowering the bottomhole pressure. Normally in the field there are multi-gas lifted wells that requires certain amount of gas to be injected to achieve the maximum oil production. Generally the amount of gas available is limited, therefore is has to be allocated per well in the best way possible to achieve maximum oil production in...

  2. Product configuration of infra structure systems for data centres

    DEFF Research Database (Denmark)

    Hvam, Lars; Christensen, Tim Teglgaard; Jensen, Søren Brogaard

    2007-01-01

    This article describes how American Power Conversion (APC), a company in the electronics industry, has used product configuration systems as a central part of the company’s mass customisation strategy. APC sells, designs, produce, delivers, and installs large complex infrastructure systems for data...... centres, and components and systems for these systems. At the heart of its mass customisation strategy are a module-based product range and the use of product configuration systems for sales and order processing. In addition, the company has implemented a manufacturing concept, which involves the mass...... production of standard components in the Far East, and customer order-based final assembly at various production sites around the world within close customer proximity. The results of applying mass customisation principles include a reduction of the overall delivery time for a complete system from around 400...

  3. Autocorrelation in queuing network type production systems - revisited

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn

    -production systems (Takahashi and Nakamura, 1998) establishes that autocorrelation plays definitely a non-negligible role in relation to the dimensioning as well as functioning of Kanban-controlled production flow lines . This must logically either imply that production managers are missing an important aspect...

  4. 30 CFR 250.803 - Additional production system requirements.

    Science.gov (United States)

    2010-07-01

    ... control shall be in effect for wells or fields having a history of sand production. The erosion-control... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Additional production system requirements. 250... OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Production...

  5. Effective product-service systems: a value-based framework

    NARCIS (Netherlands)

    Kuijken, B.; Gemser, G.; Wijnberg, N.M.

    2017-01-01

    Manufacturers increasingly engage in servitization and as a result offer services in combination with their products (i.e., product-service systems, PSS). However, while servitization in theory seems to be a promising strategy, in practice, the bundling of services with product offerings does not

  6. Autocorrelation in queuing network type production systems - revisited

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn

    -production systems (Takahashi and Nakamura, 1998) establishes that autocorrelation plays definitely a non-negligible role in relation to the dimensioning as well as functioning of Kanban-controlled production flow lines . This must logically either imply that production managers are missing an important aspect...

  7. Optimizing continuous miner coal production systems based on production and production cost

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Patwardhan, A.; Moharana, A. [Southern Illinois University, Carbondale, IL (United States). Department of Mining and Minerals Resources Engineering

    2005-07-01

    The purpose is to develop a face production cost model for room-and-pillar mining, to integrate the model with SIU-Suboleski production (SSP) modeling software, and to show that combining face production cost with ROM production provides a better indicator for comparing equipment costs. Several production planning scenarios were modeled. An SSP model was developed that incorporates capital, operating, and production costs for each option and calculates an estimate of face production cost on a raw coal basis. 6 refs., 5 figs., 6 tabs.

  8. Autocorrelation in queuing network-type production systems - revisited

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn

    2007-01-01

    In managing production systems, a strong emphasis is placed on the reduction of variance in specific transformation processes (e.g. for quality control purposes) and on controlling the level of variability in general, as for instance with the Bullwhip effect. However, the possible disturbing......, either production managers are missing important aspects in production planning, or the 'realistic' autocorrelation patterns inherent in actual production setups are not like those considered in the literature. In this paper, relevant and 'realistic' types of autocorrelation schemes are characterised...... and their levels discussed. The paper puts previous works on the impact of autocorrelation in queuing networks in perspective for production systems....

  9. Applying Product Configuration Systems in Engineering Companies

    DEFF Research Database (Denmark)

    Ladeby, Klaes Rohde

    further. “[In order] to be strategic, a capability must be honed to a user need (so that there are customers), unique (so that the products/services produced can be priced without too much regard to competition), and difficult to replicate (so that profits will not be competed away). (Teece & Pisano, 1994...

  10. Electricity production by advanced biomass power systems

    Energy Technology Data Exchange (ETDEWEB)

    Solantausta, Y. [VTT Energy, Espoo (Finland). Energy Production Technologies; Bridgwater, T. [Aston Univ. Birmingham (United Kingdom); Beckman, D. [Zeton Inc., Burlington, Ontario (Canada)

    1996-11-01

    This report gives the results of the Pyrolysis Collaborative Project organized by the International Energy Agency (IEA) under Biomass Agreement. The participating countries or organizations were Canada, European Community (EC), Finland, United States of America, and the United Kingdom. The overall objective of the project was to establish baseline assessments for the performance and economics of power production from biomass. Information concerning the performance of biomass-fuelled power plants based on gasification is rather limited, and even less data is available of on pyrolysis based power applications. In order to gain further insight into the potential for these technologies, this study undertook the following tasks: (1) Prepare process models to evaluate the cost and performance of new advanced biomass power production concepts, (2) Assess the technical and economic uncertainties of different biomass power concepts, (3) Compare the concepts in small scale and in medium scale production (5 - 50 MW{sub e}) to conventional alternatives. Processes considered for this assessment were biomass power production technologies based on gasification and pyrolysis. Direct combustion technologies were employed as a reference for comparison to the processes assessed in this study. Wood was used a feedstock, since the most data was available for wood conversion

  11. Intelligent Information Systems for Web Product Search

    NARCIS (Netherlands)

    D. Vandic (Damir)

    2017-01-01

    markdownabstractOver the last few years, we have experienced an increase in online shopping. Consequently, there is a need for efficient and effective product search engines. The rapid growth of e-commerce, however, has also introduced some challenges. Studies show that users can get overwhelmed by

  12. Amadori products formation in emulsified systems

    NARCIS (Netherlands)

    Troise, Antonio Dario; Berton-Carabin, Claire C.; Fogliano, Vincenzo

    2016-01-01

    The formation of Amadori products (APs) is the key step determining the development of the Maillard reaction (MR). The information on the chemical behaviour of the reaction between amino acids and reducing sugars in emulsions during thermal treatments is scanty and mainly focused on volatile comp

  13. Intelligent Information Systems for Web Product Search

    NARCIS (Netherlands)

    D. Vandic (Damir)

    2017-01-01

    markdownabstractOver the last few years, we have experienced an increase in online shopping. Consequently, there is a need for efficient and effective product search engines. The rapid growth of e-commerce, however, has also introduced some challenges. Studies show that users can get overwhelmed by

  14. Trace elements in animal production systems

    NARCIS (Netherlands)

    Schlegel, P.; Durosoy, S.; Jongbloed, A.W.

    2008-01-01

    This book deals with trace elements, such as cobalt, copper, iron, manganese, selenium and zinc which are essential to modern animal nutrition, but are increasingly detrimental to soil and water quality in today's globalized production. The goal in finding a sustainable balance between trace element

  15. Quality Management System of Agricultural Products Based on Spring

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    This article gives an overview of important property of the integrated management of agricultural product quality safety system,analyzes the lightweight characteristics of Spring technical system,hierarchical organization of MVC,and the technology SSH+Ajax associated with the Spring framework system.On the basis of this technical system,we design the quality management system of agricultural products under B/S model.This article points out that this system is realized mainly through consumers’information feedback and order management;then discusses operation environment,expandability,portability and security of the system.

  16. Production rate of the system-bath mutual information

    Science.gov (United States)

    Li, Sheng-Wen

    2017-07-01

    When an open system comes into contact with several thermal baths, the entropy produced by the irreversible processes (d Si=d S -∑α đQα/Tα ) keeps increasing, and this entropy production rate is always non-negative. However, when the system comes into contact with nonthermal baths containing quantum coherence or squeezing, this entropy production formula does not apply. In this paper, we study the increasing rate of mutual information between an open system and its environment. In the case of canonical thermal baths, we prove that this mutual information production rate could return exactly to the previous entropy production rate. Furthermore, we study an example of a single boson mode that comes into contact with multiple squeezed thermal baths, where the conventional entropy production rate does not apply, and we find that this mutual information production rate remains non-negative, which indicates a monotonic increase in the correlation between the system and its environment.

  17. MERIP - Design of Production Systems with focus on Human Ressources

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Knudsen, Mads Kristian Lund

    1998-01-01

    The way in which the Industry has involved the human resources in production systems, has changed in last decades. Previously the human resources were mainly considered as means to link together the technical systems, while today they are key resources responsible for development, planning......", "Employee-activated Production Development - MAPU", "Integrated Production Systems - IPS" and "Strategic Development of Staff - SUM". MERIP (Human resources in production) is a continuation of this type of projects, aiming at increasing the competitive power of the companies. However MERIP scientists want...... and production. This development has been a continuos process, and it has been supported by several research- and development projects in co-operation with Danish Industry, CO industry and The Technical University of Denmark. Among the projects should be mentioned: "Development of Production systems - UPS...

  18. A system dynamics model to determine products mix

    Directory of Open Access Journals (Sweden)

    Mahtab Hajghasem

    2014-02-01

    Full Text Available This paper presents an implementation of system dynamics model to determine appropriate product mix by considering various factors such as labor, materials, overhead, etc. for an Iranian producer of cosmetic and sanitary products. The proposed model of this paper considers three hypotheses including the relationship between product mix and profitability, optimum production capacity and having minimum amount of storage to take advantage of low cost production. The implementation of system dynamics on VENSIM software package has confirmed all three hypotheses of the survey and suggested that in order to reach better mix product, it is necessary to reach optimum production planning, take advantage of all available production capacities and use inventory management techniques.

  19. Modelling studies of fish production in integrated agriculture - aquaculture systems

    NARCIS (Netherlands)

    Dam, van A.A.

    1995-01-01


    The general objective of this thesis is to formulate a general model for fish production in integrated ponds and ricefields as a means of obtaining a better understanding of these production systems. Integrated culture systems produce fish without large industrial energy inputs and have

  20. Environmental impacts and sustainability of egg production systems

    Science.gov (United States)

    As part of a systemic assessment toward social sustainability of egg production, we have reviewed current knowledge about the environmental impacts of egg production systems and identified topics requiring further research. Currently, we know that 1) high-rise cage houses generally have poorer air q...

  1. Research efforts to improve performance of production systems

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In order to solve the problem of low efficiency of production systems, a lot of work has been done. The research efforts to improve the performance of production systems are summed up here and future research directions are discussed at last.

  2. Developing systems to support organisational learning in product development organisations

    OpenAIRE

    Donnellan, Brian; Fitzgerald, Brian

    2003-01-01

    peer-reviewed There are aspects of New Product Development (NPD) business processes that pose particularly difficult challenges to Organizational Learning systems. Short product and process life cycles compress the available time window for recouping the expenses associated with product development. Cross-functional collaboration in product development organizations requires the merging of knowledge from diverse disciplinary and personal skills-based perspectives. Cross-institutio...

  3. Co-existence of agricultural production systems.

    Science.gov (United States)

    Jank, Bernhard; Rath, Johannes; Gaugitsch, Helmut

    2006-05-01

    Strategies and best practices for the co-existence of GM and non-GM crops need to be developed and implemented with the participation of farmers and other stakeholders. According to the principle of 'subsidiarity', decisions should be made by the lowest authority possible. When applying this concept to the case of GM crops, the affected society should determine their use and management in a regional decision-making process. Public participation is better accomplished at a lower level, and democratic deficits in decision-making on GMOs are better resolved, enabling farmers to manage or avoid GM crops. Ultimately, voluntary GMO-free zones might be a tool for sustainable co-existence and GM-free production and GMO-free zones might create a specific image for marketing regional products and services, such as tourism.

  4. MERIP - Design of Production Systems with focus on Human Ressources

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Knudsen, Mads Kristian Lund

    1998-01-01

    The way in which the Industry has involved the human resources in production systems, has changed in last decades. Previously the human resources were mainly considered as means to link together the technical systems, while today they are key resources responsible for development, planning....... Those "Case-companies" will form an important basis for the development of production systems, and they will function as sparring partners for the project. MERIP will in this way be able to inform the industry about new ways in development of production systems - and suggest how the industry could...... and production. This development has been a continuos process, and it has been supported by several research- and development projects in co-operation with Danish Industry, CO industry and The Technical University of Denmark. Among the projects should be mentioned: "Development of Production systems - UPS...

  5. Offering A Product Recommendation System in E-commerce

    CERN Document Server

    Dutta, Ruma

    2011-01-01

    This paper proposes a number of explicit and implicit ratings in product recommendation system for Business-to-customer e-commerce purposes. The system recommends the products to a new user. It depends on the purchase pattern of previous users whose purchase pattern is close to that of a user who asks for a recommendation. The system is based on weighted cosine similarity measure to find out the closest user profile among the profiles of all users in database. It also implements Association rule mining rule in recommending the products. Also, this product recommendation system takes into consideration the time of transaction of purchasing the items, thus eliminating sequence recognition problem. Experimental result shows for implicit rating, the proposed method gives acceptable performance in recommending the products. It also shows introduction of association rule improves the performance measure of recommendation system.

  6. Environmental technologies of woody crop production systems

    Science.gov (United States)

    Ronald S. Zalesny Jr.; John A. Stanturf; Emile S. Gardiner; Gary S. Ba??uelos; Richard A. Hallett; Amir Hass; Craig M. Stange; James H. Perdue; Timothy M. Young; David R. Coyle; William L. Headlee

    2016-01-01

    Soil erosion, loss of productivity potential, biodiversity loss, water shortage, and soil and water pollution are ongoing processes that decrease or degrade provisioning (e.g., biomass, freshwater) and regulating (e.g., carbon sequestration, soil quality) ecosystem services. Therefore, developing environmental technologies that maximize these services is essential for...

  7. Adoption of automated livestock production systems in Northern Europe

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

    2014-01-01

    In the last decades the development of automated systems in livestock production has gained increasing interest among farmers. A combined use of computers and sensor systems has lead the development into new research areas with automated milking systems, grain drying systems and automated feeding...

  8. Broccoli production depending on the seed production system and organic and mineral fertilizer

    OpenAIRE

    LOPES, José Carlos; Mauri,Janaína; Ferreira,Adésio; Alexandre,Rodrigo S.; Freitas,Allan R de

    2012-01-01

    The experiment was conducted in a greenhouse at the Universidade Federal do Espirito Santo, in Alegre, Espirito Santo state, Brazil, to evaluate the broccoli production depending on the seed production system and organic and mineral fertilization. Seeds of the broccoli cultivar Ramoso Piracicaba were originated from lots of seed obtained in an organic and conventional production system. The experimental design was of randomized blocks, with four replications in a factorial arrangement combina...

  9. Inventory Decisions in a Product-Updated System with Component Substitution and Product Substitution

    Directory of Open Access Journals (Sweden)

    Yancong Zhou

    2013-01-01

    Full Text Available Substitution behaviors happen frequently when demands are uncertain in a production inventory system, and it has attracted enough attention from firms. Related researches can be clearly classified into firm-driven substitution and customer-driven substitution. However, if production inventory is stock-out when a firm updates its product, the firm may use a new generation product to satisfy the customer’s demand of old generation product or use updated component to substitute old component to satisfy production demand. Obviously, two cases of substitution exist simultaneously in the product-updated system when an emergent shortage happens. In this paper, we consider a component order problem with component substitution and product substitution simultaneously in a product-updated system, where the case of firm-driven substitution or customer-driven substitution can be reached by setting different values for two system parameters. Firstly, we formulate the problem into a two-stage dynamic programming. Secondly, we give the optimal decisions about assembled quantities of different types of products. Next, we prove that the expected profit function is jointly concave in order quantities and decrease the feasible domain by determining some bounds for decision variables. Finally, some management insights about component substitution and product substitution are investigated by theoretical analysis method.

  10. Research on a Product Information Management System Facing Remanufacture Engineering

    Institute of Scientific and Technical Information of China (English)

    HOU Du-cheng; YU Kai-chao; JIA Jian-shi; TANG Xiu-ying

    2007-01-01

    Remanufacture Engineering is an important characteristic and development trend of a manufacturing system in the 21st Century, and product information management is very important to Remanufacture Engineering. In this paper, we first compared traditional manufacturing and remanufacturing. Then, according to the features of Remanufacture Engineering, we analyzed the request of product information management system facing Remanufacture Engineering, and designed the system module. Finally, we built a kind of system structure of product information management facing Remanufacture Engineering and gave realization methods based on Web.

  11. The Influence of runner system on production of injection molds

    Directory of Open Access Journals (Sweden)

    Janostik Vaclav

    2016-01-01

    Full Text Available This experimental study describes the influence of runner system on rheological properties during the injection molding process. Economic effects on the amount of production are discussed as well. Autodesk Moldflow Synergy 2016 (Moldflow was used for the study of the injection process. Three suggestions of the runner system, cold runner system, hot runner system and the combination of cold–hot runner system have been promoted. These three variants underwent the rheological and economic analysis. As a result, recommendations for the application of the runner system for the required amount of production have been suggested

  12. What Happens to Integrated Product Development Models with Product/Service-System Approaches?

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

    2006-01-01

    Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

  13. Effect of cassava-starch coatings with ascorbic acidic and N-acetylcysteine on the quality of harton plantain (Musa paradisiaca

    Directory of Open Access Journals (Sweden)

    Carlos Julio Márquez Cardozo

    2015-06-01

    Full Text Available The effect of coatings was evaluated on the quality ofharton plantain fruits (Musa paradisiaca in the postharvest stage.Solutions for three treatments were prepared from 50 g L-1 cassavastarch (Manihot esculenta with 30 g L-1 glycerol as the plasticizerand 6 g L-1 polyethylene glycol-600®; for anti-browning agents, 6g L-1 ascorbic acid (AA and 8 g L-1 N-Acetyl-Cysteine (NAC wereadded. The fruits were coated by immersion, stored at 18 ± 4°Cand 85% RH. Physicochemical properties were determined at 32days postharvest. The applied coatings decreased the physiologicalweight loss (%WL and resulted in a higher pulp firmness (PF; nosignificant difference was seen with a confidence level of 95% inthe concentration of total soluble solids (TSS, acidity or maturityindex. The skin color was measured by the CIE L*a*b* method, withan average L value of 70 for the fruits coated with the 6 g L-1 AAand 8 g L-1 NAC mixture, while the control fruits had a value of 57.Also, lower a* coordinate values and browning indices were foundfor the epidermis of the coated fruits. The enzymatic activity of thepolyphenol oxidase decreased with the number of postharvest daysfor all of the treatments, being lower for the fruits with the mixtureof anti-browning agents by 27%, as compared to the control. It wasconcluded that the coating mixture containing the anti-browningagents ascorbic acid, 6 g L-1, and N-acetyl-cysteine, 8 g L-1, showeda better effect as an alternative for storing fruits and prolongingthe shelf-life of harton plantain.

  14. Hadron production in heavy relativistic systems

    CERN Document Server

    Kuiper, R; Kuiper, Rolf; Wolschin, Georg

    2007-01-01

    We investigate particle production in heavy-ion collisions at RHIC energies as function of incident energy, and centrality in a three-sources Relativistic Diffusion Model. Pseudorapidity distributions of produced charged hadrons in Au + Au and Cu + Cu collisions at sqrt(s_NN) = 19.6 GeV, 62.4 GeV, 130 GeV and 200 GeV show an almost equilibrated midrapidity source that tends to increase in size towards higher incident energy, and more central collisions. It may indicate quark-gluon plasma formation prior to hadronization.

  15. Task Management in the New ATLAS Production System

    CERN Document Server

    De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

    2014-01-01

    The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

  16. Task Management in the New ATLAS Production System

    CERN Document Server

    De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

    2013-01-01

    The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

  17. Importance of systems biology in engineering microbes for biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Mukhopadhyay, Aindrila; Redding, Alyssa M.; Rutherford, Becky J.; Keasling, Jay D.

    2009-12-02

    Microorganisms have been rich sources for natural products, some of which have found use as fuels, commodity chemicals, specialty chemicals, polymers, and drugs, to name a few. The recent interest in production of transportation fuels from renewable resources has catalyzed numerous research endeavors that focus on developing microbial systems for production of such natural products. Eliminating bottlenecks in microbial metabolic pathways and alleviating the stresses due to production of these chemicals are crucial in the generation of robust and efficient production hosts. The use of systems-level studies makes it possible to comprehensively understand the impact of pathway engineering within the context of the entire host metabolism, to diagnose stresses due to product synthesis, and provides the rationale to cost-effectively engineer optimal industrial microorganisms.

  18. INNOVATION AND SYNERGISTIC PROJECTION OF MECHANICAL ENGINEERING PRODUCTION SYSTEMS

    OpenAIRE

    2014-01-01

    The article describes the innovation development problems; problem consists of innovation projection, modernization and reengineering of the production systems. It is consider the innovation and synergetic projection conception which based on synergetic and system approach and described with such words as complication, fluctuation, etc are the important concepts of production systems management, because they fix condition of the synergetic approach.Aim of the article is the newest approach us...

  19. SECURE TRACKING SYSTEM FOR NEXT GENERATION CIT PRODUCTS

    OpenAIRE

    Kosmas, Christopher William

    2014-01-01

    The Cash in Transit (CIT) industry demands reliable and innovative products from its suppliers to ensure safety and reliability within the industry. Product innovation has been directed at a bespoke tracking system for the Cash in Transit industry, which can meet its stringent requirements and excel above the capabilities of standard, readily available tracking systems. The presented research has investigated the state of the art in tracking and localisation systems and has highlighted Wi-...

  20. Customized products and cloud service information system development research

    Directory of Open Access Journals (Sweden)

    Hung Chien-Wen

    2017-01-01

    Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

  1. Development of Hybrid Product Breakdown Structure for NASA Ground Systems

    Science.gov (United States)

    Monaghan, Mark W.; Henry, Robert J.

    2013-01-01

    The Product Breakdown Structure is traditionally a method of identification of the products of a project in a tree structure. It is a tool used to assess, plan, document, and display the equipment requirements for a project. It is part of a product based planning technique, and attempts to break down all components of a project in as much detail as possible, so that nothing is overlooked. The PBS for ground systems at the Kennedy Space Center is being developed to encompass the traditional requirements including the alignment of facility, systems, and components to the organizational hierarchy. The Ground Operations Product Breakdown Structure is a hybrid in nature in that some aspects of a work breakdown structure will be incorporated and merged with the Architecture Concept of Operations, Master Subsystem List, customer interface, and assigned management responsibility. The Ground Operations Product Breakdown Structure needs to be able to identify the flexibility of support differing customers (internal and external) usage of ground support equipment within the Kennedy Space Center launch and processing complex. The development of the Product Breakdown Structure is an iterative activity Initially documenting the organization hierarchy structure and relationships. The Product Breakdown Structure identifies the linkage between the customer program requirements, allocation of system resources, development of design goals, and identification logistics products. As the Product Breakdown Structure progresses the incorporation of the results of requirement planning for the customer occurs identifying facility needs and systems. The mature Product Breakdown Structure is baselined with a hierarchical drawing, the Product Breakdown Structure database, and an associated document identifying the verification of the data through the life cycle of the program/product line. This paper will document, demonstrate, and identify key aspects of the life cycle of a Hybrid Product

  2. Design and Realization of the Safety Production Scheduling System

    Directory of Open Access Journals (Sweden)

    Qiang Fan

    2013-01-01

    Full Text Available In this study, we have a research of the design and realization of the Safety Production Scheduling System. Urged by the government departments as well as safety supervising institutions, many coal enterprises are embarking on designing and constructing an information system platform for safety production and scheduling. How to establish a systematic, comprehensive, standardized and scientific management platform for the safety production and scheduling has become a hot issue in the coal industry, which is also an important move to integrate various safety management measures in order to prevent major safety accidents and keep up with the international industry status. Taking a successful, large-scale safety production and scheduling system for example, this study elaborates on its overall design and construction. When the system is completed, it will play an important role in strengthening safety production of the coal mines, preventing accidents as well as increasing the overall safety level of the coal industry.

  3. Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

    DEFF Research Database (Denmark)

    Saltini, Rolando; Akkerman, Renzo

    2012-01-01

    hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

  4. Product Migration Strategies to Product-Service Systems Based on Korean Industrial Cases

    Directory of Open Access Journals (Sweden)

    Hyun Chan Lee

    2012-10-01

    Full Text Available Product-service system (PSS is a system of products, service, supporting networks and infrastructure that is designed to be competitive. The concept of PSS is rather new and currently many companies and governmental institute are eager to implement the PSSs as a new business model. In this paper, we propose a three-dimensional model to classify PSS based on three axes. The three axes consist of selling product type, product usage type, and sustainability. The selling product type is classified as physical product, physical product and added services, and product-service system. The product usages type is classified as product-oriented, use-oriented, and result-oriented usage. The sustainability is classified as economy, society and environment. The 3D model is applied to the surveyed Korean industrial practices to identify some typical migration paths from physical product to PSS. Three typical migration paths are identified and the paths are used to suggest Sustainable PSS(SPSS development strategies. Three identified paths are value-extended SPSS, positioning-extended SPSS, and field-extended SPSS.

  5. Topological aperiodicity for product systems over semigroups of Ore type

    DEFF Research Database (Denmark)

    Kwasniewski, Bartosz; Szymanski, Wojciech

    2016-01-01

    We prove a version of uniqueness theorem for Cuntz-Pimsner algebras of discrete product systems over semigroups of Ore type. To this end, we introduce Doplicher-Roberts picture of Cuntz-Pimsner algebras, and the semigroup dual to a product system of 'regular' C*-correspondences. Under a certain...... aperiodicity condition on the latter, we obtain the uniqueness theorem and a simplicity criterion for the algebras in question. These results generalize the corresponding ones for crossed products by discrete groups, due to Archbold and Spielberg, and for Exel's crossed products, due to Exel and Vershik...

  6. Development of redesign method of production system based on QFD

    Science.gov (United States)

    Kondoh, Shinsuke; Umeda, Yasusi; Togawa, Hisashi

    In order to catch up with rapidly changing market environment, rapid and flexible redesign of production system is quite important. For effective and rapid redesign of production system, a redesign support system is eagerly needed. To this end, this paper proposes a redesign method of production system based on Quality Function Deployment (QFD). This method represents a designer's intention in the form of QFD, collects experts' knowledge as “Production Method (PM) modules,” and formulates redesign guidelines as seven redesign operations so as to support a designer to find out improvement ideas in a systematical manner. This paper also illustrates a redesign support tool of a production system we have developed based on this method, and demonstrates its feasibility with a practical example of a production system of a contact probe. A result from this example shows that comparable cost reduction to those of veteran designers can be achieved by a novice designer. From this result, we conclude our redesign method is effective and feasible for supporting redesign of a production system.

  7. Opportunity parameters in the development of Product/Service-Systems

    DEFF Research Database (Denmark)

    Matzen, Detlef; Andreasen, Mogens Myrup

    2006-01-01

    In the light of the current focus on innovative business development throughout industry and society, the concept of product/service-systems (PSS) is a promising approach to product development, which may yield product offers that benefit the company, customer and society alike. Only recently...... researchers have made attempts to formulate requirements and procedures for the integration of product and service development [Steinbach 2005]. In the field of environmental studies, the concept of PSS has been investigated for some time, especially for the opportunities of lowering environmental impact...... models also use the terms functional products or total care products [Alonso-Rasgado et al. 2004]. In the age of industrial globalisation, we believe a PSS-based business integration can help traditional product based companies to strengthen their position in the marketplace. By following a product/service...

  8. Generic BOMA Processing System for Assembly-To-Order Production

    Institute of Scientific and Technical Information of China (English)

    DU Jun; GU Peiliang; JIAO Yuan-yuan

    2001-01-01

    This paper discusses integrated product and production data management for assembly-to-orderproduction, which is characterized by a large number of product and process varieties. A data structure,called Bill-of-Materials-and-Assemblies (BOMA), is proposed for the purpose of unifying BOM and assembly routing data in order to accommodate a wide range of product variability and production variations.A generic BOMA concept is put forward to deal with variety effectively. A prototype system of the proposedgeneric BOMA is implemented using object-oriented modeling.

  9. Productivity of Non-Orthogonal Term Rewrite Systems

    CERN Document Server

    Raffelsieper, Matthias

    2012-01-01

    Productivity is the property that finite prefixes of an infinite constructor term can be computed using a given term rewrite system. Hitherto, productivity has only been considered for orthogonal systems, where non-determinism is not allowed. This paper presents techniques to also prove productivity of non-orthogonal term rewrite systems. For such systems, it is desired that one does not have to guess the reduction steps to perform, instead any outermost-fair reduction should compute an infinite constructor term in the limit. As a main result, it is shown that for possibly non-orthogonal term rewrite systems this kind of productivity can be concluded from context-sensitive termination. This result can be applied to prove stabilization of digital circuits, as will be illustrated by means of an example.

  10. How Offshoring Elicits Reconfiguration of the Service Production System

    DEFF Research Database (Denmark)

    Brandl, Kristin; Mol, Michael J.; Petersen, Bent

    Service production systems can be seen as a structure consisting of task execution, resources executing tasks and the service output received by the client. Offshoring acts as an exogenous shock to such a service production system. Drawing on practice theory and applying a multiple case methodology...... to a large, multinational shipping company we investigate how offshoring to an emerging economy leads to misalignment of the system. We then find that agents undertake actions, both top-down and bottom up initiatives, to attempt to realign the service production system. We develop a set of propositions...... that explains how structures and agents interact to deal with misalignment and how service output changes due to offshoring. The major contribution of this paper is that is provides a theoretically grounded explanation of how service production systems evolve over time. We also contribute to an understanding...

  11. Hypercube Expert System Shell - Applying Production Parallelism.

    Science.gov (United States)

    1989-12-01

    that himian,, currentlly do better than machines (like the task of 3 piloting an aircraft ) lendl t wituselves to solution using an artificial ...research i ut eret tiit 1iw 1wrfuirtii i of artificial intelligence application software executing on a rriilt iconipilter. Liriti t liw analysis to...I IProc~ssing Compute- inteliive alilijcatiolis. such as the RAV expert system (28), require pro. cessing beyond the perforinance ability of

  12. Pre-Production Model Cartographic EBR System.

    Science.gov (United States)

    1980-11-01

    System ........ ................. 4 3 Enlargement of Contours & Grids Plotted in Vector Mode ...... ............. 6 4 Aviation FLIP Chart Recorded in...33 17 Example of Multiup Microform Containing 16 AAIPS FLIP Charts ... .......... ... 40 U’Z)o; "’ I III II .. ..... . .L...imagery from satellite and aerial reconnaissance sensors data Radar imagery Flight Information Publications ( FLIP ) Charts and Texts as back-up for

  13. System Reliability for LED-Based Products

    Energy Technology Data Exchange (ETDEWEB)

    Davis, J Lynn; Mills, Karmann; Lamvik, Michael; Yaga, Robert; Shepherd, Sarah D; Bittle, James; Baldasaro, Nick; Solano, Eric; Bobashev, Georgiy; Johnson, Cortina; Evans, Amy

    2014-04-07

    Results from accelerated life tests (ALT) on mass-produced commercially available 6” downlights are reported along with results from commercial LEDs. The luminaires capture many of the design features found in modern luminaires. In general, a systems perspective is required to understand the reliability of these devices since LED failure is rare. In contrast, components such as drivers, lenses, and reflector are more likely to impact luminaire reliability than LEDs.

  14. Perception of the HACCP system operators on livestock product manufacturers

    OpenAIRE

    Kim, Jung-Hyun; Nam, Ki-Chang; Jo, Cheorun; Lim, Dong-Gyun

    2014-01-01

    The purpose of this study was to investigate crucial factors on HACCP system implementation in domestic livestock product plants, and to offer job satisfaction and the career prospect of HACCP system operators. The survey was carried out by selecting 150 HACCP system operators who implemented HACCP system. The respondents claimed that the most important contents in HACCP system operation were to assemble HACCP team (21.8%), and the second was to monitoring (20.0%). Documentation and recording...

  15. Product prioritization in a two-stage food production system with intermediate storage

    DEFF Research Database (Denmark)

    Akkerman, Renzo; van Donk, Dirk Pieter

    2007-01-01

    In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through the dedi......In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

  16. Energy and nutrient cycling in pig production systems

    Science.gov (United States)

    Lammers, Peter J.

    United States pig production is centered in Iowa and is a major influence on the economic and ecological condition of that community. A pig production system includes buildings, equipment, production of feed ingredients, feed processing, and nutrient management. Although feed is the largest single input into a pig production system, nearly 30% of the non-solar energy use of a conventional--mechanically ventilated buildings with liquid manure handling--pig production system is associated with constructing and operating the pig facility. Using bedded hoop barns for gestating sows and grow-finish pigs reduces construction resource use and construction costs of pig production systems. The hoop based systems also requires approximately 40% less non-solar energy to operate as the conventional system although hoop barn-based systems may require more feed. The total non-solar energy input associated with one 136 kg pig produced in a conventional farrow-to-finish system in Iowa and fed a typical corn-soybean meal diet that includes synthetic lysine and exogenous phytase is 967.9 MJ. Consuming the non-solar energy results in emissions of 79.8 kg CO2 equivalents. Alternatively producing the same pig in a system using bedded hoop barns for gestating sows and grow-finish pigs requires 939.8 MJ/pig and results in emission of 70.2 kg CO2 equivalents, a reduction of 3 and 12% respectively. Hoop barn-based swine production systems can be managed to use similar or less resources than conventional confinement systems. As we strive to optimally allocate non-solar energy reserves and limited resources, support for examining and improving alternative systems is warranted.

  17. Carbon footprint and ammonia emissions of California beef production systems.

    Science.gov (United States)

    Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

    2012-12-01

    Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

  18. The Effects of the Application of Production Information Systems

    Directory of Open Access Journals (Sweden)

    Dusanka Lecic

    2014-02-01

    Full Text Available The authors show you in this paper definition and functions of information systems, information systems development methodologies and stages of development. Also, the authors will show the effects of the application of production information systems. Authors also include SWOT analysis in which show the influence of the external and internal environment on the implementation of IS in business.

  19. Power Product Equipment Technician: Equipment Systems. Teacher Edition. Student Edition.

    Science.gov (United States)

    Hilley, Robert

    This packet contains teacher and student editions on the topic of equipment systems, intended for the preparation of power product equipment technicians. This publication contains seven units: (1) principles of power transmission; (2) mechanical drive systems; (3) principles of fluid power; (4) hydraulic and pneumatic drive systems; (5) wheel and…

  20. From Product to System Approaches in European Sustainable Product Policies: Analysis of the Package Concept of Heating Systems in Buildings

    Directory of Open Access Journals (Sweden)

    Maria Calero-Pastor

    2017-09-01

    Full Text Available Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive.

  1. Adaptation of Buffalo Production Systems Towards the Market Demand for Certified Quality Products

    Directory of Open Access Journals (Sweden)

    A. Georgoudis

    2005-05-01

    Full Text Available The objective of this article is to present the possibilities of the economic exploitation of the buffalo population in Greece through the production of certified quality products. The buffalo population in Greece has decreased dramatically during the last decades, due to the rapidly changing socio-economic conditions, mainly the mechanisation of the agricultural sector. The current study has been undertaken in the region of Kerkini Lake, where the majority of buffalo population of Greece is concentrated. The main characteristics of the production system; feeding based on the natural vegetation, the unique way of product processing and the gastronomy are investigated by filling up questionnaires. The next step includes the detailed description of the production system and the definition of the critical points where the intervention will take place. The proper application of the production protocols will be undertaken by the official organisation for certification. The farmers association will be responsible for the management of the transition of the production system. As the driving force of the new development of buffalo breeding is the production of quality products, further investigation on the special characteristics of milk and meat buffalo products, is required.

  2. System View of Product Data Management and Its Application

    Institute of Scientific and Technical Information of China (English)

    WU Feng; XU Su

    2006-01-01

    A product data management system for a manufacturing enterprise is to make sure that the proper product data can be communicated to the right people at the right time. This paper describes a system analysis paradigm for data analysis in a product data management (PDM) development. Three aspects of the paradigm, I.e., function, structure and behavior are represented. The use of the paradigm explains why so many kinds of objects are necessary in a commercial database matrix and what models are available for developing a PDM application. As another result, a lot of models are derived from the analysis of product data system paradigm to model product data and PDM database definitions.

  3. Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

    Science.gov (United States)

    Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

    2016-10-01

    This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  4. It Systems Supporting the Management of Production Capacity

    Science.gov (United States)

    Milewska, Elżbieta

    2017-03-01

    The paper presents the problem of manufacturing process flexibility in view of a company's material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

  5. Environmental consequences of different beef production systems in the EU

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

    2010-01-01

    The aim of this paper is to examine the environmental consequences of beef meat production in the EU, using a life cycle approach. Four beef production systems were studied - three from intensively reared dairy calves and one from suckler herds. According to the results of the analysis, the contr...... on a depreciation period of 20 years. This highlights the importance of taking into account the impacts of land use in assessing the environmental impacts of livestock production....

  6. Global crop production forecasting data system analysis

    Science.gov (United States)

    Castruccio, P. A. (Principal Investigator); Loats, H. L.; Lloyd, D. G.

    1978-01-01

    The author has identified the following significant results. Findings led to the development of a theory of radiometric discrimination employing the mathematical framework of the theory of discrimination between scintillating radar targets. The theory indicated that the functions which drive accuracy of discrimination are the contrast ratio between targets, and the number of samples, or pixels, observed. Theoretical results led to three primary consequences, as regards the data system: (1) agricultural targets must be imaged at correctly chosen times, when the relative evolution of the crop's development is such as to maximize their contrast; (2) under these favorable conditions, the number of observed pixels can be significantly reduced with respect to wall-to-wall measurements; and (3) remotely sensed radiometric data must be suitably mixed with other auxiliary data, derived from external sources.

  7. Increasing cropping system diversity balances productivity, profitability and environmental health

    Science.gov (United States)

    Balancing productivity, profitability, and environmental health is a key challenge for agricultural sustainability. Most crop production systems in the United States are characterized by low species and management diversity, high use of fossil energy and agrichemicals, and can have large negative im...

  8. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

  9. Lot-sizing for inventory systems with product recovery

    NARCIS (Netherlands)

    R.H. Teunter (Ruud)

    2003-01-01

    textabstractWe study inventory systems with product recovery. Recovered items are as-good-as-new and satisfy the same demands as new items. The demand rate and return fraction are deterministic. The relevant costs are those for ordering recovery lots, for ordering production lots, for holding

  10. An on-line gasoline blending system put into production

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Anew system for online gasoline blending, which was developed by researchers from the CAS Institute of Automation (CASIA), has been put into production at China Petrochemical Corporation (SINOPEC) and PetroChina Corporation. It is expected to thoroughly renovate the technology in this regard and achieve maximal economic benefits in oil production stage.

  11. Lost habits and the acceptance of product service systems

    NARCIS (Netherlands)

    Schotman, Henrikus

    2017-01-01

    Product Service Systems (PSS) are a combination of products and services, jointly fulfilling a user’s need. PSS can offer numerous benefits for businesses, society and the environment, but consumer acceptance of PSS remains rather low. Required behaviour change and existing user habits are one of

  12. Organic Dairy Production Systems in Pennsylvania: A Case Study Evaluation

    NARCIS (Netherlands)

    Rotz, C.A.; Kamphuis, G.H.; Karsten, H.D.; Weaver, R.D.

    2007-01-01

    The current market demand and price for organic milk is encouraging dairy producers, particularly those on smaller farms, to consider organic production as a means for improving the economic viability of their operations. Organic production systems vary widely in scale, in practices, and across

  13. Lot-sizing for inventory systems with product recovery

    NARCIS (Netherlands)

    R.H. Teunter (Ruud)

    2003-01-01

    textabstractWe study inventory systems with product recovery. Recovered items are as-good-as-new and satisfy the same demands as new items. The demand rate and return fraction are deterministic. The relevant costs are those for ordering recovery lots, for ordering production lots, for holding recove

  14. Stocking rate effects in a tilapia biofloc production system

    Science.gov (United States)

    Production efficiency is improved when the culture organism can grow rapidly to the desired target weight. Stocking rate is known to affect fish growth, but little information is available for tilapia grown in a biofloc technology (BFT) production system. The objective of this study was to quantify ...

  15. Attitudes of Brazilian citizens towards pig production systems

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Saab, Maria Stella Melo

    to identify Brazilian citizen clusters. Respondents' socio-demographic profile, attitudes towards issues that are expected to influence the way how people evaluate pig meat production systems, and consumption frequency of various pork products were used as background information for profiling. Three clusters...

  16. Organic Dairy Production Systems in Pennsylvania: A Case Study Evaluation

    NARCIS (Netherlands)

    Rotz, C.A.; Kamphuis, G.H.; Karsten, H.D.; Weaver, R.D.

    2007-01-01

    The current market demand and price for organic milk is encouraging dairy producers, particularly those on smaller farms, to consider organic production as a means for improving the economic viability of their operations. Organic production systems vary widely in scale, in practices, and across agro

  17. Factors affecting goat production in a communal farming system in ...

    African Journals Online (AJOL)

    Factors affecting goat production in a communal farming system in the Eastern ... and for cash sales (23%), and only 15% kept goats for home meat consumption. ... is likely to increase to the detriment of other ruminant species in the future.

  18. Production system dynamism and parasitic interac- tion of swine in ...

    African Journals Online (AJOL)

    parasite. ... variation in the distribution of these parasitic infections in different areas but not ... Swine production is increasing from time to time in many parts of tropical .... good (for those kept in clean concrete floor with drainage system), medium.

  19. HYPERBOLIC-PARABOLIC CHEMOTAXIS SYSTEM WITH NONLINEAR PRODUCT TERMS

    Institute of Scientific and Technical Information of China (English)

    Chen Hua; Wu Shaohua

    2008-01-01

    We prove the local existence and uniqueness of week solution of the hyperbolic-parabolic Chemotaxis system with some nonlinear product terms. For one dimensional case, we prove also the global existence and uniqueness of the solution for the problem.

  20. It is generally appreciated that estuaries are productive systems that ...

    African Journals Online (AJOL)

    spamer

    estuary types, i.e. permanently open and temporarily open/closed estuaries revealed a steeper regression slope and therefore greater productivity for the permanently open systems. ...... theory applied to coastal agriculture, forest, wetland and.

  1. Systems of innovation and agricultural productivity in African ...

    African Journals Online (AJOL)

    Systems of innovation and agricultural productivity in African economies. ... Open Access DOWNLOAD FULL TEXT ... sector in Africa has been dominated by the narrow approach of employing technology transfer and adoption theory. Indeed ...

  2. A Knowledge Based Interactive System for Complex Product Design

    Science.gov (United States)

    Gayretli, Ahmet

    This research presents a new Artificial Intelligence (AI) based product development approach for integrating mechanical design with electronic design to improve design and manufacture of electromechanical products by avoiding design conflicts in the early stages of the design process. The proposed approach has been implemented in a Delphi based environment integrated with a CAD system. The system assists designers from different disciplines in evaluating complex systems as far as parts relation, potential effects on each other, conflict management, costs, weight and physical constraints are concerned in the early design stages. This helps the designers to avoid design iterations leading to longer lead-time, hence increased cost. The developed system enables to rapidly develop and evaluate new complex products and add new functions to the existing products within given constraints.

  3. Design for Printing and Dyeing Production Management System

    Institute of Scientific and Technical Information of China (English)

    孙兆伟

    2008-01-01

    This paper and Tzes demands for production managememt information system in the printing and dydng,put up a relative solution based on application background and introduce function and characteristics of main modules.

  4. Conceptual model for the design of product systems

    Directory of Open Access Journals (Sweden)

    John J. Cardozo Vásquez

    2016-08-01

    Full Text Available Based on the concepts of personalization, differentiation and variability, product systems are characterized and the conditions for their design are explored. In the analysis of literature,17 variables related to the design of product systems were identified, and used to develop a conceptual model. In order to validate this finding, a survey was applied to 57 experts in the field of design. By means of a factor analysis, variables are reduced and the underlying conceptual relationships are identified. As a result of the validation, three factors are identified: structure, coherence and order, which contain the variables that determine the attributes of the product systems. These findings support the conclusion that the origin of the design process of these systems is based on the analysis of consumers and the multiple uses given and experiences obtained from these products. Study boundaries are established and future research possibilities are outlined.

  5. Conceptualizing the use of system products and system deliveries in the building industry

    DEFF Research Database (Denmark)

    Hvam, Lars; Mortensen, Niels Henrik; Thuesen, Christian;

    2013-01-01

    This article describes the concepts system products and system deliveries based on the use of product modularization and product configuration. The concepts are outlined and discussed based on examples from both the construction industry and related industry. The description focuses partly...

  6. Customer participation in service production and delivery system

    OpenAIRE

    Sridhar, M. S.

    1998-01-01

    Highlights significance of designing service delivery system, explains the integral role of customer in service production process, stresses the importance of customer-organisation interface, lists important ingredients of service package to be considered while designing customer interface, enumerates various dimensions of customer interface which can be positively made use of in design of service production and delivery system, discusses various ways and means of inducing and enhancing custo...

  7. Competivity and management activities in die production systems

    Directory of Open Access Journals (Sweden)

    Mariana Rasina

    2010-12-01

    Full Text Available Currently for a production system to act on a global market must have a policy-oriented performance management to increase competitiveness. Performance management should be focused on improved performance by operating rules and principles, techniques, operating methods and tools for improving business performance. To track progress of production, performances should be a system of indicators, well made and systematically followed up.

  8. Computer aided production planning - SWZ system of order verification

    Science.gov (United States)

    Krenczyk, D.; Skolud, B.

    2015-11-01

    SWZ (System of order verification) is a computer implementation of the methodology that support fast decision making on the acceptability of a production order, which allows to determine not the best possible solution, but admissible solution that is possible to find in an acceptable time (feasible solution) and acceptable due to the existing constraints. The methodology uses the propagation of constraints techniques and reduced to test a sequence of arbitrarily selected conditions. Fulfilment of all the conditions (the conjunction) provides the ability to perform production orders. In the paper examples of the application of SWZ system comprising the steps of planning and control is presented. The obtained results allowing the determination of acceptable production flow in the system - determination of the manufacturing system parameters those that ensure execution of orders in time under the resource constraints. SWZ also allows to generate the dispatching rules as a sequence of processing operations for each production resource, performed periodically during the production flow in the system. Furthermore the example of SWZ and simulation system integration is shown. SWZ has been enhanced with a module generating files containing the script code of the system model using the internal language of simulation and visualization system.

  9. The star system: A production engineering approach to STS

    Science.gov (United States)

    Angier, R. C.; Swartz, L. D.; Wilson, J. H.

    1985-01-01

    A fundamental change to the way Space Transportation System flight preparation is done is documented. It involves (1) systematic restructuring the Space Transportation System flight preparation task, to minimize its R&D content; (2) development of the Space Transportation Automated Reconfiguration (STAR) system to structure and support the remaining work flow. STAR is an integrated software system providing automation and quality control mechanisms necessary to create a production-like process. This approach was implemented using tools and methodology developed by IBM under NASA contract, to produce payload flight data requirements. It offers increased product quality, reduced cost per flight, and greater responsiveness to change.

  10. Design of systems for productivity and well being

    DEFF Research Database (Denmark)

    Edwards, Kasper; Jensen, Per Langaa

    2014-01-01

    It has always been an ambition within the ergonomic profession to ensure that design or redesign of production systems consider both productivity and employee well being, but there are many approaches to how to achieve this. This paper identifies the basic issues to be addressed in light of some...... research activities at DTU, especially by persons responsible for facilitating design processes. Four main issues must be addressed: (1) determining the limits and scope of the system to be designed; (2) identifying stakeholders related to the system and their role in the system design; (3) handling...

  11. Development of a Virtual Maintenance System for Complex Mechanical Product

    Directory of Open Access Journals (Sweden)

    Xin-hua Liu

    2013-01-01

    Full Text Available In order to improve the maintenance training effect of complex mechanical product, a virtual maintenance system was developed. The system framework was proposed, and the main functional modules were elaborated. A multilevel information representation model for complex mechanical product was put forward, and the flowchart of model transformation technology was designed. Moreover, a collision detection method based on hierarchical bounding volume was proposed, and the maintainability analysis and evaluation solution based on maintenance knowledge was presented. Finally, a prototype system was developed, and the proposed system was provedto be efficient through an example of hydraulic winch.

  12. Concepts in production ecology for analysis and design of animal and plant-animal production systems

    NARCIS (Netherlands)

    Ven, van de G.W.J.; Ridder, de N.; Keulen, van H.; Ittersum, van M.K.

    2003-01-01

    The use of a hierarchy in growth factors (defining, limiting and reducing growth factors), as developed for plant production has shown its usefulness in the analysis and design of plant production systems. This hierarchy presents a theoretical framework for the analysis of biophysical conditions in

  13. Microbiological quality of goat's milk obtained under different production systems

    Directory of Open Access Journals (Sweden)

    J.K. Kyozaire

    2005-06-01

    Full Text Available In order to determine the safety of milk produced by smallholder dairy goat farms, a farm-based research study was conducted on commercial dairy goat farms to compare the microbiological quality of milk produced using 3 different types of dairy goat production systems (intensive, semi-intensive and extensive. A survey of dairy goat farms in and around Pretoria carried out by means of a questionnaire revealed that most of the smallholder dairy goat farms surveyed used an extensive type of production system. The method of milking varied with the type of production system, i.e. machine milking; bucket system machine milking and hand-milking, respectively. Udder half milk samples (n=270 were analysed, of which 31.1 % were infected with bacteria. The lowest intra-mammary infection was found amongst goats in the herd under the extensive system (13.3 %, compared with 43.3 % and 36.7 % infection rates under the intensive and semi-intensive production systems, respectively. Staphylococcus intermedius (coagulase positive, Staphylococcus epidermidis and Staphylococcus simulans (both coagulase negative, were the most common cause of intramammary infection with a prevalence of 85.7 % of the infected udder halves. The remaining 14.3 % of the infection was due to Staphylococcus aureus. Bacteriology of bulk milk samples on the other hand, showed that raw milk obtained by the bucket system milking machine had the lowest total bacterial count (16 450 colony forming units (CFU/mℓ compared to that by pipeline milking machine (36 300 CFU/mℓ or handmilking (48 000 CFU/mℓ. No significant relationship was found between the somatic cell counts (SCC and presence of bacterial infection in goat milk. In comparison with the herds under the other 2 production systems, it was shown that dairy goat farming under the extensive production system, where hand-milking was used, can be adequate for the production of safe raw goat milk.

  14. [The antioxidant status of the seeds in populations of the great plantain (Plantago major L.) growing in an area exposed to the Balakovo Atomic Electric Power Station and to chemical enterprises].

    Science.gov (United States)

    Korogodina, V L; Bamblevskiĭ, V P; Grishina, I V; Gustova, M V; Zabaluev, S A; Korogodin, V I; Kuraeva, T V; Lozovskaia, E L; Maslov, O D

    2000-01-01

    The results of the determination of radionuclide and chemical (multielement analysis) soil pollution are presented. The data on antioxidant status of plantain (Plantago major L.) in conjunction with the data on radionuclide and chemical pollution are analyzed. The most significant decrease in antioxidant activity of plant seeds was observed in areas situated along the most frequent wind direction in the region in summer 1998. It is suggested that lower antioxidant status is caused by the chronic radionuclide release on the chemically polluted territories.

  15. System of Systems Approach in Production: Theory to Action

    OpenAIRE

    Mahmood, Asif

    2014-01-01

    System of Systems (SoS) is a novel approach in practical field which has been widely studied and applied recognizably in military context by department of defense (DoD). But being versatile, the approach has a lot of potential to deliver in various other areas as well, for example, it is now on the verge to transcend the boundaries of defense system, and ready to be applied in industrial sector. This manuscript based dissertation mainly investigates and explores the last phrased facet, and of...

  16. Design of Traceability System for Pork Safety Production

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    With the development of society and the improvement of living standards,consumers’demand for high quality meat products is constantly increasing.Traceability for livestock products is widely recognized to be an effective measure for any modern and integrated food safety control system.The quality tracing and traceability system of production’s entire processes is an important technology tool to protect pork safety.This paper proposes a RFID-enabled traceability system for pork supply chain.By adopting SQL Server 2000 databases and intelligent identification technology,a tracing system suitable to Chinese situation for monitoring and controlling quality of pork is constructed,and it manages to realize information traceability for entire pork production.The study indicates that the traceability system is valuable for practical reference and feasible.It can help consumers to confide in pork safety and encourage the pork industry developing.

  17. In vitro meat production system: why and how?

    Science.gov (United States)

    Sharma, Shruti; Thind, Sukhcharanjit Singh; Kaur, Amarjeet

    2015-12-01

    Due to the nutritional importance and the sustained popularity of meat as a foodstuff, the livestock production sector has been expanding incessantly. This exponential growth of livestock meat sector poses a gigantic challenge to the sustainability of food production system. A new technological breakthrough is being contemplated to develop a substitute for livestock meat. The idea is to grow meat in a culture in the lab and manipulate its composition selectively. This paper aims to discuss the concept of In Vitro Meat production system, articulate the underlying technology and analyse the context of its implications, as proposed by several scientists and stakeholders. The challenges facing this emerging technology have also been discussed.

  18. Characteristics of Strategies in Product/Service-System Development

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Timothy Charles

    2006-01-01

    The underlying principle in Product/Service-Systems (PSS) strategy is to shift from business based on the value of the transfer of product ownership and responsibility, to business based on the value of utility of the product and services. This paper identifies characteristics of various strategies...... that may be applied in PSS development. PSS concepts created in projects by third year Design & Innovation students at the Technical University of Denmark (DTU) working with product-life oriented design approaches were reviewed, and the strategies developed were analysed. This identification and mapping...

  19. Fuzzy production planning models for an unreliable production system with fuzzy production rate and stochastic/fuzzy demand rate

    Directory of Open Access Journals (Sweden)

    K. A. Halim

    2011-01-01

    Full Text Available In this article, we consider a single-unit unreliable production system which produces a single item. During a production run, the production process may shift from the in-control state to the out-of-control state at any random time when it produces some defective items. The defective item production rate is assumed to be imprecise and is characterized by a trapezoidal fuzzy number. The production rate is proportional to the demand rate where the proportionality constant is taken to be a fuzzy number. Two production planning models are developed on the basis of fuzzy and stochastic demand patterns. The expected cost per unit time in the fuzzy sense is derived in each model and defuzzified by using the graded mean integration representation method. Numerical examples are provided to illustrate the optimal results of the proposed fuzzy models.

  20. Parasitological measures to characterize different livestock production systems

    DEFF Research Database (Denmark)

    Thamsborg, Stig M.; Mejer, H.; Enemark, Heidi

    2013-01-01

    . Several on-farm surveys have indicated that, despite large farm-to-farm variation, levels and diversity of parasite infections may reflect differences in production systems. In developed countries, organic farming (OF) as a certified livestock production system with a given set of standards, has gained...... momentum in several livestock species, mainly ruminants, poultry and pigs. The changes in management which need to be implemented in order to get the OF status, vary with species and local conditions. For example, conventional pig production is highly intensive and indoors in NW Europe, whereas...... OF practices include outdoor production with associated higher risks of parasites. In dairy cattle production, changes are less dramatic and mostly related to self-sufficiency with feedstuffs and increased use of grazing. But in all cases, there is a reduced reliance on external input, including restrictions...

  1. Design of systems for productivity and well being.

    Science.gov (United States)

    Edwards, Kasper; Jensen, Per Langaa

    2014-01-01

    It has always been an ambition within the ergonomic profession to ensure that design or redesign of production systems consider both productivity and employee well being, but there are many approaches to how to achieve this. This paper identifies the basic issues to be addressed in light of some research activities at DTU, especially by persons responsible for facilitating design processes. Four main issues must be addressed: (1) determining the limits and scope of the system to be designed; (2) identifying stakeholders related to the system and their role in the system design; (3) handling the process' different types of knowledge; and (4) emphasizing that performance management systems, key performance indicators (KPIs), and leadership are also part of the system design and must be given attention. With the examples presented, we argue that knowledge does exist to help system design facilitators address these basic issues.

  2. Production system rationalisation on the example of iron foundry

    Directory of Open Access Journals (Sweden)

    S. Kukla

    2010-04-01

    Full Text Available The present paper presents a systemic approach to foundry management. Thanks to production process modelling and simulation techniques, an attempt was made to synthesise many interconnected devices and numerous manufacturing stages into one production system. In the beginning, a factor analysis was carried out of the research object, which is a system of iron castings manufacture on automated foundry lines. On the basis of a simulation experiment, use the accessible production resources and manufacturing own cost of castings were analysed, depending on batch content and melting order, choice of an automatic line and the model of line fed with cast iron, sequence of order realization and the size of production lots. Simulation experiments were carried out on a computer simulation model prepared in the Arena packet produced by Rockwell Automation. Cost was estimated on the basis of additional calculation according to cost centres basing on factory spreadsheet.

  3. Developing and promoting OKP production system: a JIT production planning approach

    Science.gov (United States)

    Samavati, Mehran

    2011-10-01

    The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

  4. Implementation of HACCP system in production of UHT milk

    Directory of Open Access Journals (Sweden)

    Irena Jeličić

    2009-06-01

    Full Text Available Regulation of the Croatian Food Law (NN 46/07 which demands implementation of food safety management system based on HACCP principles became mandatory at the January 01st 2009. According to that regulation all subjects in food production and retail sector including the dairy industry too are obligant to implement HACCP system in their production processes. In the process of HACCP implementation many problems occur which result in delaying the implementation, scarce performance of assigned monitoring actions and inadequate maintenance and improvement of the system. All of the latter mentioned problems disable proactive functioning and may lead to disturbance of food safety of the end product. The aim of this paper is to demonstrate the interpretation of each steps that have to be taken in the process of implementation of HACCP system in the production of UHT milk. Thereby many practical informations and examples have been gathered while reviewing the HACCP system in KIM d.d. Dairy industry, Karlovac, Croatia. This paper contains the examples of all indentified hazards, all assigned control actions, hazard analysis and critical control point determination for the process of UHT milk production in KIM d.d. Dairy industry, Karlovac. Furthermore, also examples and ideas for the traceability, verification and validation, product recall and withdrawal procedures are given.

  5. Conception of Self-Construction Production Scheduling System

    Science.gov (United States)

    Xue, Hai; Zhang, Xuerui; Shimizu, Yasuhiro; Fujimura, Shigeru

    With the high speed innovation of information technology, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be reduced. This extraction mechanism should be applied for various production processes for the interoperability. Using the master information extracted by the system, production scheduling operators can be supported to accelerate the production scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, at first a model for expressing a scheduling problem is proposed. Then the guideline to extract the scheduling information and use the extracted information is shown and some applied functions are also proposed based on it.

  6. Forage based animal production systems and sustainability, an invited keynote

    Directory of Open Access Journals (Sweden)

    Abdul Shakoor Chaudhry

    2008-07-01

    Full Text Available Forages are essential for the successful operation of animal production systems. This is more relevant to ruminants which are heavily dependant upon forages for their health and production in a cost-effective and sustainable manner. While forages are an economical source of nutrients for animal production, they also help conserve the soil integrity, water supply and air quality. Although the role of these forages for animal production could vary depending upon the regional preferences for the animal and forage species, climate and resources, their importance in the success of ruminant production is acknowledged. However with the increasing global human population and urbanisation, the sustainability of forage based animal production systems is sometimes questioned due to the interrelationship between animal production and the environment. It is therefore vital to examine the suitability of these systems for their place in the future to supply quality food which is safe for human consumption and available at a competitive price to the growing human population. Grassland and forage crops are recognised for their contribution to the environment, recreation and efficiency of meat and milk production,. To maintain sustainability, it is crucial that such farming systems remain profitable and environmentally friendly while producing nutritious foods of high economical value. Thus, it is pertinent to improve the nutritive value of grasses and other forage plants in order to enhance animal production to obtain quality food. It is also vital to develop new forages which are efficiently utilised and wasted less by involving efficient animals. A combination of forage legumes, fresh or conserved grasses, crop residues and other feeds could help develop an animal production system which is economically efficient, beneficial and viable. Also, it is crucial to use efficient animals, improved forage conservation methods, better manure handling, and minimum

  7. Root system-based limits to agricultural productivity and efficiency

    DEFF Research Database (Denmark)

    Thorup-Kristensen, Kristian; Kirkegaard, John

    2016-01-01

    BACKGROUND: There has been renewed global interest in both genetic and management strategies to improve root system function in order to improve agricultural productivity and minimize environmental damage. Improving root system capture of water and nutrients is an obvious strategy, yet few studie...

  8. A Lightweight Intelligent Virtual Cinematography System for Machinima Production

    Science.gov (United States)

    2007-01-01

    A Lightweight Intelligent Virtual Cinematography System for Machinima Production David K. Elson1, Mark O. Riedl2 1Columbia University, Computer...However, creating quality cinematic visualizations with existing machinima techniques still requires a high degree of talent and effort. We...produces a cinematic visualization. Unlike other virtual cinematography systems, Cambot favors an offline algorithm coupled with an extensible

  9. FPGA based Control of a Production Cell System

    NARCIS (Netherlands)

    Groothuis, Marcel A.; Zuijlen, van Jasper J.P.; Broenink, Jan F.

    2008-01-01

    Most motion control systems for mechatronic systems are implemented on digital computers. In this paper we present an FPGA based solution implemented on a low cost Xilinx Spartan III FPGA. A Production Cell setup with multiple parallel operating units is chosen as a test case. The embedded control s

  10. Kijkwijzer: The Dutch rating system for audiovisual productions

    NARCIS (Netherlands)

    Valkenburg, P.M.; Beentjes, J.W.J.; Nikken, P.; Tan, E.S.H.

    2002-01-01

    Kijkwijzer is the name of the new Dutch rating system in use since early 2001 to provide information about the possible harmful effects of movies, home videos and television programs on young people. The rating system is meant to provide audiovisual productions with both age-based and content-based

  11. Short-Term Robustness of Production Management Systems : New Methodology

    NARCIS (Netherlands)

    Kleijnen, J.P.C.; Gaury, E.G.A.

    2000-01-01

    This paper investigates the short-term robustness of production planning and control systems. This robustness is defined here as the systems ability to maintain short-term service probabilities (i.e., the probability that the fill rate remains within a prespecified range), in a variety of environmen

  12. Kijkwijzer: The Dutch rating system for audiovisual productions

    NARCIS (Netherlands)

    Valkenburg, P.M.; Beentjes, J.W.J.; Nikken, P.; Tan, E.S.H.

    2002-01-01

    Kijkwijzer is the name of the new Dutch rating system in use since early 2001 to provide information about the possible harmful effects of movies, home videos and television programs on young people. The rating system is meant to provide audiovisual productions with both age-based and content-based

  13. Environmental and Social Management System Implementation Handbook : Crop Production

    OpenAIRE

    International Finance Corporation

    2014-01-01

    This Handbook is intended to be a practical guide to help companies in the crop production industry develop and implement an environmental and social management system, which should help to improve overall operations. If a company has existing management systems for quality or health and safety, this Handbook will help to expand them to include environmental and social performance. Sectio...

  14. Image processing system performance prediction and product quality evaluation

    Science.gov (United States)

    Stein, E. K.; Hammill, H. B. (Principal Investigator)

    1976-01-01

    The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

  15. Short-Term Robustness of Production Management Systems : New Methodology

    NARCIS (Netherlands)

    Kleijnen, J.P.C.; Gaury, E.G.A.

    2000-01-01

    This paper investigates the short-term robustness of production planning and control systems. This robustness is defined here as the systems ability to maintain short-term service probabilities (i.e., the probability that the fill rate remains within a prespecified range), in a variety of

  16. Impact of product configuration systems on product profitability and costing accuracy

    DEFF Research Database (Denmark)

    Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

    2017-01-01

    This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability....... However, previous studies have not addressed this relationship to a great extent. For that reason, a configure-to-order (CTO) manufacturing company was analyzed. A longitudinal field study was performed in which the accuracy of the cost calculations and the products’ profitability were analyzed before...

  17. MCFC integrated system in a biodiesel production process

    Science.gov (United States)

    Urbani, F.; Freni, S.; Galvagno, A.; Chiodo, V.

    2011-03-01

    The continuous increasing in biodiesel production by transesterification process is leading to an excess of glycerol production as a byproduct. The utilization of this huge amount of glycerol appears as a not easy solvable problem and thus several authors have proposed alternative ways. The integration of the main production process with a glycerol feed molten carbonate fuel cells bottoming cycle, to satisfy plant energy requirements, seems to be one of the most promising one. The proposed paper reports the main results obtained by authors in the framework of an investigation on a possible use of glycerol as energy sources for a real pilot plant for biodiesel production. An overall evaluation of worldwide biodiesel production plants was made and especially about the production capacity in European Union in the last decade. To make a more detailed study, authors were taken into account a real production plant. After a preliminary step, purported to plant mass and energy flows determination, authors considered the integration of a bottoming cycle based on: (i) steam reforming of glycerol for syn-gas production; (ii) molten carbonate fuel cells (MCFC) system supplied by syn-gas for heat and electricity production. A mathematical model, based on experimental data, has been developed to calculate mass and energy balances for the proposed plant lay-out as well as plant energy efficiency enhancement has been determined. Results have evidenced the feasibility of this process and demonstrated that plant integrated with bottoming cycle can reach a very high level of energy self-production.

  18. A product-service system approach to telehealth application design.

    Science.gov (United States)

    Flores-Vaquero, Paul; Tiwari, Ashutosh; Alcock, Jeffrey; Hutabarat, Windo; Turner, Chris

    2016-06-01

    A considerable proportion of current point-of-care devices do not offer a wide enough set of capabilities if they are to function in any telehealth system. There is a need for intermediate devices that lie between healthcare devices and service networks. The development of an application is suggested that allows for a smartphone to take the role of an intermediate device. This research seeks to identify the telehealth service requirements for long-term condition management using a product-service system approach. The use of product-service system has proven to be a suitable methodology for the design and development of telehealth smartphone applications.

  19. ASSESSING THE SUSTAINABILITY OF AGRICULTURAL PRODUCTION SYSTEMS USING FUZZY LOGIC

    Directory of Open Access Journals (Sweden)

    Moslem Sami

    2013-09-01

    Full Text Available First stage for attaining sustainability in a system is the measurement of current state of sustainability. Indicators are widely used as tools for measurement of sustainability. In this study, a comprehensive index was proposed to measure sustainability in agricultural production systems. This index takes advantage of fuzzy logic to combine all six indexes which were selected as the representative of three dimensions of sustainability. A set of models and sub-models based on the fuzzy inference system were employed to define the index. A case study conducted in two large production farms of maize and wheat, in Iran, proved the feasibility and usability of the model.

  20. Practice of building production planning system of company with a wide range of products - case study

    Directory of Open Access Journals (Sweden)

    Łukasz Hadaś

    2012-09-01

    Full Text Available Background: The complexity of the manufacturing environments of today's mechanical engineering companies and the number of both internal and external restrictions affecting to need of building tailored production planning and control systems. This statement is particularly important in conditions of companies with a wide range of products and different customer service strategies (different locations of the logistics decoupling point otherwise called "order penetration point". Streams of materials in these conditions require different management what is the main reason for carrying out research in business conditions by the authors. Material and methods: The research was carried out in industrial engineering in complex environmental conditions of production. This was a specializing in technology, multi-departments environment, with multiple streams of values and a wide range of products (about 500 items. The work was carried out under the transformation of the production system from the "push" logic of flow to "pull" logic of flow and building a dedicated system based on the best practice approach. Results: The paper describes the process of building tailored hybrid systems in the area of planning and shop flow control of production. The authors present the theoretical considerations on the issue and practical experiences. The authors present factors of selection of the transformation path and its road map. The article describes the part of the authors' own experience in the work on the methodology of transformation of Polish companies in the running business condition. Conclusions: Establishing the methodology of transformation of the production system is not a simple task. This paper presents only selected aspects of complex decision-making process. However, the authors presented work shows the important aspect of the transformation of production systems for these organizational conditions.

  1. Systems of attitudes towards production in the pork industry

    DEFF Research Database (Denmark)

    Sørensen, Bjarne Taulo; Dutra de Barcellos, Marcia; Veflen Olsen, Nina

    2012-01-01

    , understanding them as embedded into a wider attitude system that consists of attitudes towards objects of different abstraction levels, ranging from personal value orientations over general socio-political attitudes to evaluations of specific characteristics of agricultural production systems. It is assumed...... production systems was modelled. The analysis was based on data from a cross-national survey involving 1931 participants from Belgium, Denmark, Germany and Poland. The survey questionnaire contained measures of personal value orientations and attitudes towards environment and nature, industrial food...... search algorithms and structural equation models. The results suggest that evaluative judgments of the importance of pork production system attributes are generated in a schematic manner, driven by personal value orientations. The effect of personal value orientations was strong and largely unmediated...

  2. Relational dynamics in the multi-helices knowledge production system

    DEFF Research Database (Denmark)

    Thai, Thi Minh; Hjortsø, Carsten Nico Portefée

    in an emerging economy. Findings highlight the emergence of a fifth-helices knowledge production system includes the state, science and education, industry, international actors, and society. The system comprises two major segments, one associated with the traditional command economy and characterized......-level dynamics are characterized by political ambidexterity that enables the state to maintain control by privileging traditional science and education constituencies, and at the same time support the transition of the knowledge production system towards international methodology and quality standards through......Drawing on the triple helix framework and organizational institutionalism, this article applies a qualitative research approach to analyze structures, institutional logics, power relations that shape inter-organizational relations and the structuration of a knowledge production system...

  3. Product Recommendation System Based on Personal Preference Model Using CAM

    Science.gov (United States)

    Murakami, Tomoko; Yoshioka, Nobukazu; Orihara, Ryohei; Furukawa, Koichi

    Product recommendation system is realized by applying business rules acquired by data maining techniques. Business rules such as demographical patterns of purchase, are able to cover the groups of users that have a tendency to purchase products, but it is difficult to recommend products adaptive to various personal preferences only by utilizing them. In addition to that, it is very costly to gather the large volume of high quality survey data, which is necessary for good recommendation based on personal preference model. A method collecting kansei information automatically without questionnaire survey is required. The constructing personal preference model from less favor data is also necessary, since it is costly for the user to input favor data. In this paper, we propose product recommendation system based on kansei information extracted by text mining and user's preference model constructed by Category-guided Adaptive Modeling, CAM for short. CAM is a feature construction method that can generate new features constructing the space where same labeled examples are close and different labeled examples are far away from some labeled examples. It is possible to construct personal preference model by CAM despite less information of likes and dislikes categories. In the system, retrieval agent gathers the products' specification and user agent manages preference model, user's likes and dislikes. Kansei information of the products is gained by applying text mining technique to the reputation documents about the products on the web site. We carry out some experimental studies to make sure that prefrence model obtained by our method performs effectively.

  4. Review and appraisal of concept of sustainable food production systems

    Science.gov (United States)

    Brklacich, Michael; Bryant, Christopher R.; Smit, Barry

    1991-01-01

    Environmental degradation, competition for resources, increasing food demands, and the integration of agriculture into the international economy threaten the sustainability of many food production systems. Despite these concerns, the concept of sustainable food production systems remains unclear, and recent attempts to appraise sustainability have been hampered by conceptual inconsistencies and the absence of workable definitions. Six perspectives are shown to underpin the concept. Environmental accounting identifies biophysical limits for agriculture. Sustained yield refers to output levels that can be maintained continuously. Carrying capacity defines maximum population levels that can be supported in perpetuity. Production unit viability refers to the capacity of primary producers to remain in agriculture. Product supply and security focuses on the adequacy of food supplies. Equity is concerned with the spatial and temporal distribution of products dervied from resource use. Many studies into sustainable agriculture cover more than one of these perspectives, indicating the concept is complex and embraces issues relating to the biophysical, social, and economic environments. Clarification of the concept would facilitate the development of frameworks and analytical systems for appraising the sustainability of food production systems.

  5. Mixed grazing systems benefit both upland biodiversity and livestock production.

    Directory of Open Access Journals (Sweden)

    Mariecia D Fraser

    Full Text Available BACKGROUND: With world food demand expected to double by 2050, identifying farming systems that benefit both agricultural production and biodiversity is a fundamentally important challenge for the 21(st century, but this has to be achieved in a sustainable way. Livestock grazing management directly influences both economic outputs and biodiversity on upland farms while contributing to potentially damaging greenhouse gas emissions, yet no study has attempted to address these impacts simultaneously. METHODS: Using a replicated, landscape-scale field experiment consisting of five management 'systems' we tested the effects of progressively altering elements within an upland farming system, viz i incorporating cattle grazing into an upland sheep system, ii integrating grazing of semi-natural rough grazing into a mixed grazing system based on improved pasture, iii altering the stocking ratio within a mixed grazing system, and iv replacing modern crossbred cattle with a traditional breed. We quantified the impacts on livestock productivity and numbers of birds and butterflies over four years. RESULTS CONCLUSION AND SIGNIFICANCE: We found that management systems incorporating mixed grazing with cattle improve livestock productivity and reduce methane emissions relative to sheep only systems. Systems that also included semi-natural rough grazing consistently supported more species of birds and butterflies, and it was possible to incorporate bouts of summer grazing of these pastures by cattle to meet habitat management prescriptions without compromising cattle performance overall. We found no evidence that the system incorporating a cattle breed popular as a conservation grazer was any better for bird and butterfly species richness than those based on a mainstream breed, yet methane emissions from such a system were predicted to be higher. We have demonstrated that mixed upland grazing systems not only improve livestock production, but also benefit

  6. Inventory System and Functionality Evaluation for Production Logistics

    OpenAIRE

    Khabbazi, Mahmood Reza; M. K. Hasan; A. Shapi’i; R. Sulaiman; Taei-Zadeh, A

    2013-01-01

    This paper addressed a comprehensive modelling and functionality requirement evaluation of perpetual production logistics inventory system for small-to-medium enterprises. The main idea is to analyse the system behaviour and data transactions invoked by a module-based inventory system using business process modelling and object-oriented data modelling techniques. The paper explains through the methodology and modelling procedure which eventually leads to a computerized inventory information s...

  7. Entropy production in systems with long range interactions

    Science.gov (United States)

    Pakter, Renato; Levin, Yan

    2017-04-01

    On a fine grained scale the Gibbs entropy of an isolated system remains constant throughout its dynamical evolution. This is a consequence of Liouville’s theorem for Hamiltonian systems and appears to contradict the second law of thermodynamics. In reality, however, there is no problem since the thermodynamic entropy should be associated with the Boltzmann entropy, which for non-equilibrium systems is different from Gibbs entropy. The Boltzmann entropy accounts for the microstates which are not accessible from a given initial condition, but are compatible with a given macrostate. In a sense the Boltzmann entropy is a coarse grained version of the Gibbs entropy and will not decrease during the dynamical evolution of a macroscopic system. In this paper we will explore the entropy production for systems with long range interactions. Unlike for short range systems, in the thermodynamic limit, the probability density function for these systems decouples into a product of one particle distribution functions and the coarse grained entropy can be calculated explicitly. We find that the characteristic time for the entropy production scales with the number of particles as {{N}α} , with α >0 , so that in the thermodynamic limit entropy production takes an infinite amount of time.

  8. Weapon System Requirements: Detailed Systems Engineering Prior to Product Development Positions Programs for Success

    Science.gov (United States)

    2016-11-01

    contractor subsequently discovered problems with the aircraft wiring and aerial refueling systems and encountered a fuel contamination incident, all...WEAPON SYSTEM REQUIREMENTS Detailed Systems Engineering Prior to Product Development Positions Programs for Success...Accountability Office Highlights of GAO-17-77, a report to congressional committees November 2016 WEAPON SYSTEM REQUIREMENTS Detailed Systems

  9. Profitability indicators of milk production cost center in intensive systems of production

    Directory of Open Access Journals (Sweden)

    Glauber dos Santos

    2012-01-01

    Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

  10. Automated systems to identify relevant documents in product risk management.

    Science.gov (United States)

    Wee, Xue Ting; Koh, Yvonne; Yap, Chun Wei

    2012-03-02

    Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748) that was better than that of general automated system. Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful articles. Thus the efficiency of product risk management can be

  11. Automated systems to identify relevant documents in product risk management

    Directory of Open Access Journals (Sweden)

    Wee Xue

    2012-03-01

    Full Text Available Abstract Background Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. Results The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748 that was better than that of general automated system. Conclusions Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful

  12. Automated systems to identify relevant documents in product risk management

    Science.gov (United States)

    2012-01-01

    Background Product risk management involves critical assessment of the risks and benefits of health products circulating in the market. One of the important sources of safety information is the primary literature, especially for newer products which regulatory authorities have relatively little experience with. Although the primary literature provides vast and diverse information, only a small proportion of which is useful for product risk assessment work. Hence, the aim of this study is to explore the possibility of using text mining to automate the identification of useful articles, which will reduce the time taken for literature search and hence improving work efficiency. In this study, term-frequency inverse document-frequency values were computed for predictors extracted from the titles and abstracts of articles related to three tumour necrosis factors-alpha blockers. A general automated system was developed using only general predictors and was tested for its generalizability using articles related to four other drug classes. Several specific automated systems were developed using both general and specific predictors and training sets of different sizes in order to determine the minimum number of articles required for developing such systems. Results The general automated system had an area under the curve value of 0.731 and was able to rank 34.6% and 46.2% of the total number of 'useful' articles among the first 10% and 20% of the articles presented to the evaluators when tested on the generalizability set. However, its use may be limited by the subjective definition of useful articles. For the specific automated system, it was found that only 20 articles were required to develop a specific automated system with a prediction performance (AUC 0.748) that was better than that of general automated system. Conclusions Specific automated systems can be developed rapidly and avoid problems caused by subjective definition of useful articles. Thus the efficiency of

  13. The role of the production scheduling system in rescheduling

    Science.gov (United States)

    Kalinowski, K.; Grabowik, C.; Kempa, W.; Paprocka, I.

    2015-11-01

    The paper presents the rescheduling problem in the context of cooperation between production scheduling system (PSS) and other units in an integrated manufacturing environment - decision makers and software systems. The main aim is to discuss the PSS functionality for maximizing automation of the rescheduling process, reducing the response time and improving the quality of generated solutions. PSSs operate in the meeting of tactical and operational level of planning and control, and play an important role in the production preparation and control. On the basis of information about orders, technology and production system state (e.g. resources availability) they prepare and/or update a detailed plan of production flow - a schedule. All necessary data for scheduling and rescheduling are usually collected in other systems both from organizational and technical production preparation, e.g. ERP, PLM, MES, CAPP or others, as well as they are entered directly by the decision- makers/operators. Data acquired in this way are often incomplete and inconsistent. Therefore the existing rescheduling software works according to interactive method - rather support but does not replace the human decision maker in tasks planning. When rescheduling, due to the limited amount of time to make a decision this interaction is particularly important. An additional problem arises in data acquisition, in the process of data exchanging between systems or in the identification of new data sources and their processing. Different approaches to rescheduling were characterized, including those solutions, where all these operations are carried out by an autonomous system and those in which scheduling is performed only upon request from the outside, for the newly created scheduling data representing the current state of the production system.

  14. Increasing cropping system diversity balances productivity, profitability and environmental health.

    Science.gov (United States)

    Davis, Adam S; Hill, Jason D; Chase, Craig A; Johanns, Ann M; Liebman, Matt

    2012-01-01

    Balancing productivity, profitability, and environmental health is a key challenge for agricultural sustainability. Most crop production systems in the United States are characterized by low species and management diversity, high use of fossil energy and agrichemicals, and large negative impacts on the environment. We hypothesized that cropping system diversification would promote ecosystem services that would supplement, and eventually displace, synthetic external inputs used to maintain crop productivity. To test this, we conducted a field study from 2003-2011 in Iowa that included three contrasting systems varying in length of crop sequence and inputs. We compared a conventionally managed 2-yr rotation (maize-soybean) that received fertilizers and herbicides at rates comparable to those used on nearby farms with two more diverse cropping systems: a 3-yr rotation (maize-soybean-small grain + red clover) and a 4-yr rotation (maize-soybean-small grain + alfalfa-alfalfa) managed with lower synthetic N fertilizer and herbicide inputs and periodic applications of cattle manure. Grain yields, mass of harvested products, and profit in the more diverse systems were similar to, or greater than, those in the conventional system, despite reductions of agrichemical inputs. Weeds were suppressed effectively in all systems, but freshwater toxicity of the more diverse systems was two orders of magnitude lower than in the conventional system. Results of our study indicate that more diverse cropping systems can use small amounts of synthetic agrichemical inputs as powerful tools with which to tune, rather than drive, agroecosystem performance, while meeting or exceeding the performance of less diverse systems.

  15. Increasing cropping system diversity balances productivity, profitability and environmental health.

    Directory of Open Access Journals (Sweden)

    Adam S Davis

    Full Text Available Balancing productivity, profitability, and environmental health is a key challenge for agricultural sustainability. Most crop production systems in the United States are characterized by low species and management diversity, high use of fossil energy and agrichemicals, and large negative impacts on the environment. We hypothesized that cropping system diversification would promote ecosystem services that would supplement, and eventually displace, synthetic external inputs used to maintain crop productivity. To test this, we conducted a field study from 2003-2011 in Iowa that included three contrasting systems varying in length of crop sequence and inputs. We compared a conventionally managed 2-yr rotation (maize-soybean that received fertilizers and herbicides at rates comparable to those used on nearby farms with two more diverse cropping systems: a 3-yr rotation (maize-soybean-small grain + red clover and a 4-yr rotation (maize-soybean-small grain + alfalfa-alfalfa managed with lower synthetic N fertilizer and herbicide inputs and periodic applications of cattle manure. Grain yields, mass of harvested products, and profit in the more diverse systems were similar to, or greater than, those in the conventional system, despite reductions of agrichemical inputs. Weeds were suppressed effectively in all systems, but freshwater toxicity of the more diverse systems was two orders of magnitude lower than in the conventional system. Results of our study indicate that more diverse cropping systems can use small amounts of synthetic agrichemical inputs as powerful tools with which to tune, rather than drive, agroecosystem performance, while meeting or exceeding the performance of less diverse systems.

  16. Caracterización de la Funcionalidad Tecnológica de una Fuente Rica en Fibra Dietaria Obtenida a partir de Cáscara de Plátano / Characterization of Technological Functionality of Dietary Fiber Rich Source Obtained from Plantain Peel

    Directory of Open Access Journals (Sweden)

    Alarcón García Miguel Ángel

    2013-08-01

    Full Text Available Resumen. Con el objetivo de obtener la fuente de fibra dietaria y realizar su caracterización, cáscaras de plátano verde (Musa AAB fueron sometidas a un proceso industrial que involucró etapas de selección, lavado, troceado, secado (hasta alcanzar una humedad final del 5% y molido. El proceso completo presentó un rendimiento de 2% en fuente de fibra de cáscara de plátano (FFCP. Se determinaron valores de fibra dietaria total (FDT; 46,79%, fibra dietaria soluble (FDS; 1,68% y fibra dietaria insoluble (FDI; 45,12%. El material resultante fue sometido al efecto de la temperatura utilizando 2 niveles (temperatura ambiente, 20 ºC, y temperatura de escaldado para productos cárnicos, 74 °C y bajo estas condiciones fue caracterizado en términos de capacidad de absorción de agua, capacidad de absorción de aceite, capacidad de retención de agua y capacidad de absorción de moléculas orgánicas; variables que no presentaron diferencias estadísticamente significativas, a excepción de la capacidad de absorción de aceite. Por lo anterior, puede concluirse que la FFCP corresponde a un recurso con aptitud para su inclusión en matrices alimenticias tipo cárnicas. / Abstract. Green plantain peels (Musa AAB were subjected to an industrial process involving selection, washing, chopping, drying (until reach a final moisture content of 5% and grounding steps with the aim of obtaining a source of dietary fiber and perform their characterization. The total process yield was 2% as a fiber source plantain peel (FSPP. Values for total dietary fiber (TDF; 46.79%, soluble dietary fiber (SDF; 1.68% and insoluble dietary fiber (IDF; 45.12% were determined. The resulting material was subjected to the effect of two levels of temperature(environmental temperature, 20 ºC, and scalding temperature, 74 °C for meat products. Under these conditions, the FSPP was characterized in terms of water absorption capacity, oil retention capacity, water holding capacity

  17. Chinese consumers' attitude towards different pig production systems

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Grunert, Klaus G.; Yanfeng, Z.

    2008-01-01

    This study investigates Chinese consumers' attitude towards different pig production systems by means of a conjoint analysis. While there has been a range of studies on western consumers' attitudes to various forms of food production, little is known about such attitudes in other cultural contexts...... to food safety which furthermore can provide lean meat with consistent quality are also preferred compared to farms that have less focus on food safety. Chinese consumers also rejected imported pig breeds and tasty but variable meat....

  18. Another interpretation of stigmergy for product-driven systems architecture

    OpenAIRE

    Pannequin, Rémi; Thomas, André

    2012-01-01

    International audience; Product-driven systems (PDS) may enable manufacturing companies to meet business demands more quickly and effectively, by localizing decision as near as possible to the material flows. However, the actual architecture of a PDS is still not well defined. This paper proposes a PDS architecture based on a particular interpretation of the concept of stigmergy, where cooperation between production actors is achieved thanks to attributes (informational pheromones) attached t...

  19. Chinese consumers' attitude towards different pig production systems

    DEFF Research Database (Denmark)

    de Barcellos, Marcia Dutra; Grunert, Klaus G.; Yanfeng, Z.;

    2008-01-01

    This study investigates Chinese consumers' attitude towards different pig production systems by means of a conjoint analysis. While there has been a range of studies on western consumers' attitudes to various forms of food production, little is known about such attitudes in other cultural context...... to food safety which furthermore can provide lean meat with consistent quality are also preferred compared to farms that have less focus on food safety. Chinese consumers also rejected imported pig breeds and tasty but variable meat....

  20. Methods and systems for the production of hydrogen

    Science.gov (United States)

    Oh, Chang H [Idaho Falls, ID; Kim, Eung S [Ammon, ID; Sherman, Steven R [Augusta, GA

    2012-03-13

    Methods and systems are disclosed for the production of hydrogen and the use of high-temperature heat sources in energy conversion. In one embodiment, a primary loop may include a nuclear reactor utilizing a molten salt or helium as a coolant. The nuclear reactor may provide heat energy to a power generation loop for production of electrical energy. For example, a supercritical carbon dioxide fluid may be heated by the nuclear reactor via the molten salt and then expanded in a turbine to drive a generator. An intermediate heat exchange loop may also be thermally coupled with the primary loop and provide heat energy to one or more hydrogen production facilities. A portion of the hydrogen produced by the hydrogen production facility may be diverted to a combustor to elevate the temperature of water being split into hydrogen and oxygen by the hydrogen production facility.

  1. Production process for advanced space satellite system cables/interconnects.

    Energy Technology Data Exchange (ETDEWEB)

    Mendoza, Luis A.

    2007-12-01

    This production process was generated for the satellite system program cables/interconnects group, which in essences had no well defined production process. The driver for the development of a formalized process was based on the set backs, problem areas, challenges, and need improvements faced from within the program at Sandia National Laboratories. In addition, the formal production process was developed from the Master's program of Engineering Management for New Mexico Institute of Mining and Technology in Socorro New Mexico and submitted as a thesis to meet the institute's graduating requirements.

  2. HACCP system in radiation-hygiene control of pig production

    Directory of Open Access Journals (Sweden)

    Mitrović Radosav

    2005-01-01

    Full Text Available The paper presents instructive methodology for introducing and realizing the HACCP system in pig production, as a typical representative of intensive breeding, with the objective of establishing radiation-hygiene supervision. Attention was focused on the type of pig diet as the key link in the production chain, in fact the selection of the raw material components necessary in the production of pig feed concentrates for intense breeding conditions, and on the establishment of a certain radiation-hygiene balance through prognostic-selective methodology, as a guarantee of radiation safety.

  3. A Product Development Decision Model for Cockpit Weather Information System

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  4. A Product Development Decision Model for Cockpit Weather Information Systems

    Science.gov (United States)

    Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

    2003-01-01

    There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

  5. Attitudes of European citizens towards pig production systems

    DEFF Research Database (Denmark)

    Krystallis, Athanasios; de Barcellos, Marcia Dutra; Kügler, Jens Oliver

    2009-01-01

    pork with specific fat content, and finally the preferred quality characteristics of the pork end-product. The results of the conjoint analysis were used for a subsequent cluster analysis in order to identify European citizen clusters. Respondents' socio-demographic profile, attitudes towards issues...... that are expected to influence the way people evaluate pig meat production systems, and consumption frequency of various pork products are used as background information to identify segment profiles. Pork appears to play a substantial role as a part of the diet for most respondents in the four countries...

  6. Thermodynamic efficiency and entropy production in the climate system.

    Science.gov (United States)

    Lucarini, Valerio

    2009-08-01

    We present an outlook on the climate system thermodynamics. First, we construct an equivalent Carnot engine with efficiency eta and frame the Lorenz energy cycle in a macroscale thermodynamic context. Then, by exploiting the second law, we prove that the lower bound to the entropy production is eta times the integrated absolute value of the internal entropy fluctuations. An exergetic interpretation is also proposed. Finally, the controversial maximum entropy production principle is reinterpreted as requiring the joint optimization of heat transport and mechanical work production. These results provide tools for climate change analysis and for climate models' validation.

  7. Novel Hydrogen Production Systems Operative at Thermodynamic Extremes

    Energy Technology Data Exchange (ETDEWEB)

    Gunsalus, Robert

    2012-11-30

    We have employed a suite of molecular, bioinformatics, and biochemical tools to interrogate the thermodynamically limiting steps of H{sub 2} production from fatty acids in syntrophic communities. We also developed a new microbial model system that generates high H{sub 2} concentrations (over 17% of the gas phase) with high H{sub 2} yields of over 3 moles H{sub 2} per mole glucose. Lastly, a systems-based study of biohydrogen production in model anaerobic consortia was performed to begin identifying key regulated steps as a precursor to modeling co-metabolism. The results of these studies significantly expand our ability to predict and model systems for H{sub 2} production in novel anaerobes that are currently very poorly documented or understood.

  8. Parasitological measures to characterize different livestock production systems

    DEFF Research Database (Denmark)

    Thamsborg, Stig M.; Mejer, H.; Enemark, Heidi

    2013-01-01

    OF practices include outdoor production with associated higher risks of parasites. In dairy cattle production, changes are less dramatic and mostly related to self-sufficiency with feedstuffs and increased use of grazing. But in all cases, there is a reduced reliance on external input, including restrictions...... in the livestock sector but the local farming systems may represent the ‘hidden world of OF’ (Parrott et al., 2005) e.g. as low input sustainable agriculture based on local resources and processes and traditional farming (food grown without chemicals or organic by default). Some of the problems and perhaps also...... some of the solutions in these systems are parallel to challenges related to organic livestock production in developed countries. This paper will consider how parasitological research may bridge the systems and cross-fertilize one another, and so far there are several good examples, e.g. the extensive...

  9. Systems Engineering Metrics: Organizational Complexity and Product Quality Modeling

    Science.gov (United States)

    Mog, Robert A.

    1997-01-01

    Innovative organizational complexity and product quality models applicable to performance metrics for NASA-MSFC's Systems Analysis and Integration Laboratory (SAIL) missions and objectives are presented. An intensive research effort focuses on the synergistic combination of stochastic process modeling, nodal and spatial decomposition techniques, organizational and computational complexity, systems science and metrics, chaos, and proprietary statistical tools for accelerated risk assessment. This is followed by the development of a preliminary model, which is uniquely applicable and robust for quantitative purposes. Exercise of the preliminary model using a generic system hierarchy and the AXAF-I architectural hierarchy is provided. The Kendall test for positive dependence provides an initial verification and validation of the model. Finally, the research and development of the innovation is revisited, prior to peer review. This research and development effort results in near-term, measurable SAIL organizational and product quality methodologies, enhanced organizational risk assessment and evolutionary modeling results, and 91 improved statistical quantification of SAIL productivity interests.

  10. Models of production runs for multiple products in flexible manufacturing system

    Directory of Open Access Journals (Sweden)

    Ilić Oliver

    2011-01-01

    Full Text Available How to determine economic production runs (EPR for multiple products in flexible manufacturing systems (FMS is considered in this paper. Eight different although similar, models are developed and presented. The first four models are devoted to the cases when no shortage is allowed. The other four models are some kind of generalization of the previous ones when shortages may exist. The numerical examples are given as the illustration of the proposed models.

  11. The role of productivity in improving the environmental sustainability of ruminant production systems.

    Science.gov (United States)

    Capper, Judith L; Bauman, Dale E

    2013-01-01

    The global livestock industry is charged with providing sufficient animal source foods to supply the global population while improving the environmental sustainability of animal production. Improved productivity within dairy and beef systems has demonstrably reduced resource use and greenhouse gas emissions per unit of food over the past century through the dilution of maintenance effect. Further environmental mitigation effects have been gained through the current use of technologies and practices that enhance milk yield or growth in ruminants; however, the social acceptability of continued intensification and use of productivity-enhancing technologies is subject to debate. As the environmental impact of food production continues to be a significant issue for all stakeholders within the field, further research is needed to ensure that comparisons among foods are made based on both environmental impact and nutritive value to truly assess the sustainability of ruminant products.

  12. Dairy production system type and critical points of contamination

    Directory of Open Access Journals (Sweden)

    Gilberto Henrique Simões

    2015-12-01

    Full Text Available Current milk production includes a large diversity between systems, which generates difficulties in defining a microbiological standard. The adapted practical and hygienic-sanitary management methods are diverse and introduce great complexity into the production systems. Based on this scenario, the objective of this study was to evaluate the types of dairy production systems of western Parana and to quantify Staphylococcus sp in three critical points in the dairy cattle production systems: the milking machines, milkers’ hands, the cooling tanks and raw milk. A total of 35 samples of refrigerated raw milk were collected, and a questionnaire referring to hygienic and sanitary management was administered. All of the data were collected during the period from September to October 2012 and involved 35 properties in the municipality of Marechal Cândido Rondon – PR. From these data, five groups were formed based on cluster analysis (CHA. The multiple correspondence analysis (MCA presented in the first two dimensions, CP1 (81.43% and CP2 (36.87%, showed the relevance of the variables used, which are sanitary and production management methods, and contamination and control of mastitis, respectively (CP1 and CP2. We found average contamination with 9.9 x 101 CFU/cm2, 2.2x104 CFU/cm2, 28 CFU/ cm2 and 3.8x103 CFU/mL; for milking machines, milkers’ hands, cooling tanks and milk, respectively. The results reveal the presence of staphylococcal agent in dairy production systems regardless of the adopted hygiene and health management protocols. The guidance, planning and adaptation of hygiene and health management systems can significantly improve the microbiological quality of the milk produced, both qualitatively and quantitatively.

  13. Energy Production System Management - Renewable energy power supply integration with Building Automation System

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Joao [Centre of Mechatronics Engineering - CEM/Institut of Mechanical Engineering - IDMEC, University of Evora, R. Romao Ramalho, 59, 7000-671 Evora (Portugal); Martins, Joao [Centre of Technology and Systems/Faculdade de Ciencias e Tecnologia, Universidade Nova Lisboa, 1049-001 Lisboa (Portugal)

    2010-06-15

    Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the ''heart and soul'' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems. (author)

  14. Understanding the Modularity of Socio-technical Production Systems

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff

    This paper seeks to contribute to the development of Configurational Theory by offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network Theory (ANT) in particular. By formulating modularity from an ANT perspective covering social......, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity dimension. The developed theoretical framework is used for analyzing the modularity of three different production systems the pre......-modern, modern and post-modern construction practices....

  15. Designing Integrated Product- Service System Solutions in Manufacturing Industries

    DEFF Research Database (Denmark)

    Costa, Nina; Patrício, Lia; Morelli, Nicola

    2015-01-01

    Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches......, this paper proposes an integrative method that joins PSS’s systems and network approach with the creative, human-centered, value cocreation approach of SD. The paper also describes the development and application of this method to the creation of integrated solutions for the laboratory industry, highlighting...

  16. Optimal Maintenance of a Production System with Intermediate Buffers

    Directory of Open Access Journals (Sweden)

    Constantinos C. Karamatsoukis

    2012-01-01

    Full Text Available We consider a production-inventory system that consists of an input-generating installation, a production unit and L intermediate buffers. It is assumed that the installation transfers the raw material to buffer and the production unit pulls the raw material from buffer We consider the problem of the optimal preventive maintenance of the installation if the installation deteriorates stochastically with usage and the production unit is always in operative condition. We also consider the problem of the optimal preventive maintenance of the production unit if the production unit deteriorates stochastically with usage and the installation is always in operative condition. Under a suitable cost structure and for given contents of the buffers, it is proved that the average-cost optimal policy for the first (second problem initiates a preventive maintenance of the installation (production unit if and only if the degree of deterioration of the installation (production unit exceeds some critical level. Numerical results are presented for both problems.

  17. REPLACEMENT ANALYSIS FOR DEFECTED PRODUCTS: A SYSTEM DYNAMIC MODELING APPROACH

    Directory of Open Access Journals (Sweden)

    R. N. Mall

    2012-07-01

    Full Text Available The current growth in present time due to globalization of markets means more competition for companies especially those in developing economies that have limited analytical tools for business decisions. Market demand uncertainty affects the performance and behavior of the planning processes used by production to satisfy sales. This uncertainty and the resulting instability in the production schedules affect the relationships with the suppliers from whom the company purchases raw materials and component parts. In order to solve the problem, this research developed a SCM system dynamics model that helps business managers and researchers in SCM make better and informed decisions for close life cycle products. The work is focused on the study of behavior of replacement in a supply chain related to closed life-cycle products by system dynamics, that are goods produced and sold and if any defect is found the product is replaced. This study includes the effect of replacement in profit and other variables. This work also includes the development of a model in the system and validation of the model. In this model the relation of the variables like customer, demand, cost, price is studied and the work is focused that what will be the optimum value of the defected product. It has been assumed that if we want to decrease the defected product the cost of the production will increase and that will reduce the profit and if we want to increase the defect the no of customers will decrease and their demand will decrease and this will decrease the profit.

  18. Transition From NASA Space Communication Systems to Commerical Communication Products

    Science.gov (United States)

    Ghazvinian, Farzad; Lindsey, William C.

    1994-01-01

    Transitioning from twenty-five years of space communication system architecting, engineering and development to creating and marketing of commercial communication system hardware and software products is no simple task for small, high-tech system engineering companies whose major source of revenue has been the U.S. Government. Yet, many small businesses are faced with this onerous and perplexing task. The purpose of this talk/paper is to present one small business (LinCom) approach to taking advantage of the systems engineering expertise and knowledge captured in physical neural networks and simulation software by supporting numerous National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) projects, e.g., Space Shuttle, TDRSS, Space Station, DCSC, Milstar, etc. The innovative ingredients needed for a systems house to transition to a wireless communication system products house that supports personal communication services and networks (PCS and PCN) development in a global economy will be discussed. Efficient methods for using past government sponsored space system research and development to transition to VLSI communication chip set products will be presented along with notions of how synergy between government and industry can be maintained to benefit both parties.

  19. Fisher Pierce products for improving distribution system reliability

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The challenges facing the electric power utility today in the 1990s has changed significantly from those of even 10 years ago. The proliferation of automation and the personnel computer have heightened the requirements and demands put on the electric distribution system. Today`s customers, fighting to compete in a world market, demand quality, uninterrupted power service. Privatization and the concept of unregulated competition require utilities to streamline to minimize system support costs and optimize power delivery efficiency. Fisher Pierce, serving the electric utility industry for over 50 years, offers a line of products to assist utilities in meeting these challenges. The Fisher Pierce Family of products provide tools for the electric utility to exceed customer service demands. A full line of fault indicating devices are offered to expedite system power restoration both locally and in conjunction with SCADA systems. Fisher Pierce is the largest supplier of roadway lighting controls, manufacturing on a 6 million dollar automated line assuring the highest quality in the world. The distribution system capacitor control line offers intelligent local or radio linked switching control to maintain system voltage and Var levels for quality and cost efficient power delivery under varying customer loads. Additional products, designed to authenticate revenue metering calibration and verify on sight metering service wiring, help optimize the profitability of the utility assuring continuous system service improvements for their customers.

  20. Bioelectrochemical systems (BES) for sustainable energy production and product recovery from organic wastes and industrial wastewaters

    DEFF Research Database (Denmark)

    Pant, Deepak; Singh, Anoop; Van Bogaert, Gilbert

    2012-01-01

    Bioelectrochemical systems (BESs) are unique systems capable of converting the chemical energy of organic waste including low-strength wastewaters and lignocellulosic biomass into electricity or hydrogen/chemical products in microbial fuel cells (MFCs) or microbial electrolysis cells (MECs......) respectively, or other products formed at the cathode by an electrochemical reduction process. As compared to conventional fuel cells, BESs operate under relatively mild conditions, use a wide variety of organic substrates and mostly do not use expensive precious metals as catalysts. The recently discovered...

  1. How will Smart City Production Systems Transform Supply Chain Design: a Product-level investigation

    OpenAIRE

    Kumar, M.; Graham, G; Hennelly, P; Srai, J. S.

    2016-01-01

    This is the accepted manuscript. It is currently embargoed pending publication. This paper is a first step to understand the role that a smart city with a distributed production system could have in changing the nature and form of supply chain design. Since the end of the Second World War most supply chain systems for manufactured products have been based on “scale economies” and “bigness”; in our paper we challenge this traditional view. Our fundamental research question is: how could a s...

  2. Modular Systems Of Fixation And Position Jigs In The Production Process For Products And Systems

    Science.gov (United States)

    Babík, Ondrej; Šajgalík, Michal; Zaušková, Lucia; Czán, Andrej

    2015-12-01

    The project deals with design and implementation of adjustment onto mounting tables in the automotive industry. Manual control system of the jigs is replaced by a pneumatic system. Advantages of the pneumatic system are eliminating service side-time, improving work flow and increasing safety and ergonomics at work. Thanks to higher effectivity of the work process, manpower can be used in other work positions.

  3. Whole-systems framework for sustainable consumption and production

    Energy Technology Data Exchange (ETDEWEB)

    Anarow, B.; Greener, C.; Gupta, V.; Kinsley, M.; Henderson, J.; Page, C.; Parrot, K. [Rocky Mountain Inst. (United States)

    2003-07-01

    The 2002 World Summit on Sustainable Development's Plan of Implementation recorded its delegates' recommended actions for achieving global sustainable development. The plan calls for a shift away from patterns of unsustainable consumption and production and for the creation of a ten-year framework of programs to bring the requested actions into fruition. This paper proposes a whole-systems model that expands on conventional consumption-production models by describing the linked cycles of unsustainable investment, production, consumption, and waste. The Investment, Production, Consumption, Waste (IPCW) cycle proposed is a more complete situation model than conventional production-consumption models. The IPCW cycle shows that: 1. Investment uses financial and natural capital to create production capacity, 2. Production makes goods (and often waste) using additional financial and natural capital (operating costs and raw materials), 3. Consumption takes goods and turns them into profits and (usually) waste, 4. Waste remains. The integration of agencies, shifting of mindsets, and leveraging of funds necessary for achieving the goals of more sustainable production and consumption systems are obviously difficult. The recommendations in this paper emphasize the power of information, opportunities for drastic increases in resource efficiency in buildings and infrastructure, and the need for integrated interventions. All suggestions stem from the axiom that the whole is greater than the sum of its parts. The recommendations can be summarized as follows: understand the investment, production, consumption, and waste cycles in which any environmental problem is embedded; target interventions at multiple points in the cycle, measure the impact of these interventions and adjust further interventions accordingly. (BA)

  4. Perception of the HACCP system operators on livestock product manufacturers.

    Science.gov (United States)

    Kim, Jung-Hyun; Nam, Ki-Chang; Jo, Cheorun; Lim, Dong-Gyun

    2014-01-01

    The purpose of this study was to investigate crucial factors on HACCP system implementation in domestic livestock product plants, and to offer job satisfaction and the career prospect of HACCP system operators. The survey was carried out by selecting 150 HACCP system operators who implemented HACCP system. The respondents claimed that the most important contents in HACCP system operation were to assemble HACCP team (21.8%), and the second was to monitoring (20.0%). Documentation and recording (16.9%) and verification (11.1%) were followed. The respondents answered the major factor in sanitation management was cleaning/washing/disinfection (18.9%) and inspection (18.4%). The results showed that there were significant differences in the prospect of occupation in HACCP system operator by the gender (p HACCP system operator were satisfied with their job (73%) and also showed optimistic prospect of occupation (82%).

  5. Data Mining Prototype System Based on Product Data Management

    Institute of Scientific and Technical Information of China (English)

    石勇; 周传宏; 张传强

    2004-01-01

    Product data management (PDM) is a unique technique that integrates and manages all applications, information and processes defining a product from design to manufacture, and to end-user support. However, exploration of valuable information and knowledge from the PDM system has become a key in improvement of efficiency and implementation of knowledge management in an enterprise. This paper introduces a data mining prototype system model based on PDM, and emphasizes some important techniques such as design of the prototype system framework, methods of data selection and integration of data mining prototype system and PDM. The model basically solves the problem of functional losses in mining and analyzing data in PDM. Application of data mining to PDM is meaningful to the ideas and techniques of PDM, and to the rapid development of data mining application itself. Also, it is useful in improving development and usage of enterprise databases.

  6. Evolutionary based system for production scheduling in foundry

    Directory of Open Access Journals (Sweden)

    A. Stawowy

    2008-10-01

    Full Text Available This work presents a development of a capable-to-promise system for companies that operate under the hybrid make-to-order and maketo-stock strategy in a lot-sizing and flowshop environment. Proposed system simultaneously considers planning and scheduling processesin order to achieve the optimality. Optimisation engine is based on an advanced evolutionary algorithm. Information available in ERPsystem from different production units and stages, the optimization module, and customer requests are integrated via Internet using XMLlanguage as a data exchange standard.The details on key elements of the system and a software architecture are given. Practical application of the system is illustrated on the example of production scheduling for an iron castings foundry.

  7. Approaches to higher productivity in health care system.

    Science.gov (United States)

    Tabish, S A; Sinha, R P; Kumar, A

    1991-01-01

    The prosperity of organisations is recognised as being dependent on their comparative productivity. Productivity expresses a relationship between outputs from a system and the inputs which go into this creation. Hospital activities have to be assessed. Results have to be evaluated. The medical and paramedical staff have to quantify procedure and assess them qualitatively in order to improve the standards of care. Assessment techniques already introduced in many hospitals have succeeded in reducing the number of antibiotics (and their cost) and the amount of blood used in certain operations and also cutting the wait for operations. As long as there is unused capability in the individual or the productive system, increases in productivity can be achieved without decline in quality. If one focuses on quality while holding speed constant, quality should improve, waste should be eliminated, and productivity should increase. This can happen as long as the individual, or group of individuals, is willing to exert effort and has the capacity to achieve the quality--productivity levels desired. It is the operations manager's task to provide the facilities, tools and desired (motivation) to do so.

  8. Glycaemic index and load values tested in normoglycemic adults for five staple foodstuffs: pounded yam, pounded cassava-plantain, placali, attieke and maize meal stiff porridge.

    Science.gov (United States)

    Kouamé, Adam C; Kouassi, Kouakou N; N'dri, Yao D; Amani, N'guessan G

    2015-02-16

    There is currently an increased global interest in the published glycaemic index (GI) and glycaemic load (GL) values of foods. However, data on the GI and GL values of different varieties of foods within Côte d'Ivoire are very limited. The study therefore aimed at finding the GI and GL of the main food staples in Côte d'Ivoire. Following the International Standard Organisation's protocol (ISO/FDI 26642:2010), a selection of five staple foodstuffs were tested for their GI and GL. Fasted healthy subjects were given 50 g of available carbohydrate servings of a glucose reference, which was tested twice, and test foods which were tested once, on separate occasions. Excepted attieke (GI 63), the majority of foods tested have a high GI (GI>70). Attieke (agbodjama) had a high GL (GL 29) while placali (GL 17) and maize meal stiff porridge (GL 16) had medium GLs. The GLs of pounded cassava-plantain and pounded yam are 26 and 22. Consumption of attieke could minimize postprandial blood glucose spikes, in spite of high GL and potentially have benefit in the management and prevention of some chronic diseases.

  9. Glycaemic Index and Load Values Tested in Normoglycemic Adults for Five Staple Foodstuffs: Pounded Yam, Pounded Cassava-Plantain, Placali, Attieke and Maize Meal Stiff Porridge

    Directory of Open Access Journals (Sweden)

    Adam C. Kouamé

    2015-02-01

    Full Text Available There is currently an increased global interest in the published glycaemic index (GI and glycaemic load (GL values of foods. However, data on the GI and GL values of different varieties of foods within Côte d’Ivoire are very limited. The study therefore aimed at finding the GI and GL of the main food staples in Côte d’Ivoire. Following the International Standard Organisation’s protocol (ISO/FDI 26642:2010, a selection of five staple foodstuffs were tested for their GI and GL. Fasted healthy subjects were given 50 g of available carbohydrate servings of a glucose reference, which was tested twice, and test foods which were tested once, on separate occasions. Excepted attieke (GI 63, the majority of foods tested have a high GI (GI > 70. Attieke (agbodjama had a high GL (GL 29 while placali (GL 17 and maize meal stiff porridge (GL 16 had medium GLs. The GLs of pounded cassava-plantain and pounded yam are 26 and 22. Consumption of attieke could minimize postprandial blood glucose spikes, in spite of high GL and potentially have benefit in the management and prevention of some chronic diseases.

  10. Molecular characterization of plantain class i chitinase gene and its expression in response to infection by Gloeosporium musarum Cke and Massee and other abiotic stimuli.

    Science.gov (United States)

    Fan, Jianming; Wang, Hongbin; Feng, Dongru; Liu, Bin; Liu, Haiyan; Wang, Jinfa

    2007-11-01

    We have cloned a chitinase cDNA (MpChi-1) from plantain (Musa paradisiacal L) using rapid amplification of cDNA ends (RACE) according to a sequence fragment which we had cloned using the suppression subtractive hybridization (SSH) technique. The MpChi-1 encodes a protein of 326 amino acids and belongs to acidic chitinase class Ib subfamily. MpChi-1 shares high identity with rice endochitinase (XP_468714) and different each other only at three residues. Homology modelling indicated these three substitutions would not change the configuration of the activity site of the enzyme. We have expressed recombinant MpChi-1 and purified by ammonium sulphate precipitation and preparative reversed phase HPLC. The recombinant protein could hydrolyse chitin and inhibit the growth of the Gloeosporium musarum Cke and Massee in vitro. Northern blot revealed that the MpChi-1 transcripts rapidly after inoculation with G. musarum and maximum mRNA accumulation reached at 48 h. Jasmonic acid (JA) and salicylic acid (SA) could induce MpChi-1 expression, while mechanical wounding, silver nitrate and osmotic stress stimulated only a slight accumulation of MpChi-1 transcripts. Abscisic acid (ABA) could induce MpChi-1 transcript. These results suggest the MpChi-1 plays important role in the events of the hypersensitive reaction (HR).

  11. Transcient expression of â-glucuronidasa on cells suspensión from the hybrid plantain cultivar ‘FHIA-21’ (AAAB

    Directory of Open Access Journals (Sweden)

    Dion Daniels

    2002-04-01

    Full Text Available This work was carried out with the objective of studying parameters that influence transient expression of the enzyme â-glucuronidase in cell suspensions of the plantain hybrid cultivar ‘FHIA-21’ (Musa sp. AAAB. Studies were done with three distances and four pressures. Results of this experiment revealed the importance of the distance and pressure of bombardment, with the most effective being 12 cm and 140 psi respectively with statistical difference to the other treatments. Different plasmid constructs were also studied and it was demonstrated that they didn’t have the same tendencies. The plasmid constructs under the control of the maize polyubiquitin promoter showed better efficiencies than the CaMV 35S promoter. The biological factor is also of great importance. The physiological age of the cell suspensions confirmed its fundamental role in transformation efficiencies with the best results obtained when cell suspensions of five to ten days after subculture were used. Key words: gene gun, genetic transformation, microparticles, Musa sp.

  12. Bottlenecks in serial production lines: A system-theoretic approach

    Directory of Open Access Journals (Sweden)

    C.-T. Kuo

    1996-01-01

    Full Text Available In this work, a new definition of production systems bottlenecks is formulated and analyzed. Specifically, a machine is defined as the bottleneck if the sensitivity of the system's performance index to this machine's production rate in isolation is the largest. Although appealing from the systems point of view, this definition suffers a deficiency due to the fact that the sensitivities involved cannot be either measured on-line or efficiently calculated off-line. To avoid this, the paper develops a method based on indirect but real-time data. From this point of view, the main result of the work is as follows: The bottleneck machine in a serial production line can be identified by analyzing relationships between the so-called manufacturing blockage and manufacturing starvation of each machine. This leads to a simple rule for bottleneck identification. The rule requires neither the calculation of the production rate sensitivities nor the production rate itself. When the probabilities of manufacturing blockages and starvations are not available from on-line measurements, the paper presents their analytical estimates which, under certain conditions, can be used for bottleneck identification. Finally, a case study at an automotive component plant is described.

  13. Multiple products of B-splines used in CAD system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The function upgrade of computer aided design (CAD) system requested that the multiple product of B-spline functions should be represented as a linear combination of some suitable (usually higher-degree) B-splines. In this paper, we apply the theory of spline space and discrete B-splines to deduce the representation of the coefficients of all terms of the linear combination, which can be directly applied to software coding in system development.

  14. Design requirements for SRB production control system. Volume 4: Implementation

    Science.gov (United States)

    1981-01-01

    The implementation plan which is presented was developed to provide the means for the successful implementation of the automated production control system. There are three factors which the implementation plan encompasses: detailed planning; phased implementation; and user involvement. The plan is detailed to the task level in terms of necessary activities as the system is developed, refined, installed, and tested. These tasks are scheduled, on a preliminary basis, over a two-and-one-half-year time frame.

  15. Photoelectrochemical based direct conversion systems for hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Khaselev, O.; Bansal, A.; Kocha, S.; Turner, J.A. [National Renewable Energy Lab., Golden, CO (United States)

    1998-08-01

    With an eye towards developing a photoelectrochemical system for hydrogen production using sunlight as the only energy input, two types of systems were studied, both involving multijunction devices. One set of cells consisted of a-Si triple junctions and the other a GaInP{sub 2}/GaAs tandem cell combination. Additional investigations were carried out on semiconductor surface modifications to move semiconductor band edges to more favorable energetic positions.

  16. Integrated Product and Process Design Using a Reverse Engineering System

    Institute of Scientific and Technical Information of China (English)

    A; Ajmal; T; S; Tat

    2002-01-01

    Computer-integrated manufacturing (CIM) and revers e engineering (RE) have changed drastically the concept of product re-design, pla nning and manufacture of components. However, the main problems currently facing the developers of reverse engineering system, is the time consuming digitis ation of 3D data and the conversion of large amounts of data into a concise and manageable format and linking it to a CAD/CAM system. Automated 3-D profile gen eration, measurements and inspection of manufactured comp...

  17. Automatic milking systems, farm size, and milk production.

    Science.gov (United States)

    Rotz, C A; Coiner, C U; Soder, K J

    2003-12-01

    Automatic milking systems (AMS) offer relief from the demanding routine of milking. Although many AMS are in use in Europe and a few are used in the United States, the potential benefit for American farms is uncertain. A farm-simulation model was used to determine the long-term, whole-farm effect of implementing AMS on farm sizes of 30 to 270 cows. Highest farm net return to management and unpaid factors was when AMS were used at maximal milking capacity. Adding stalls to increase milking frequency and possibly increase production generally did not improve net return. Compared with new traditional milking systems, the greatest potential economic benefit was a single-stall AMS on a farm size of 60 cows at a moderate milk production level (8600 kg/cow). On other farm sizes using single-stall type robotic units, losses in annual net return of 0 dollars to 300 dollars/cow were projected, with the greatest losses on larger farms and at high milk production (10,900 kg/cow). Systems with one robot serving multiple stalls provided a greater net return than single-stall systems, and this net return was competitive with traditional parlors for 50- to 130-cow farm sizes. The potential benefit of AMS was improved by 100 dollars/cow per year if the AMS increased production an additional 5%. A 20% reduction in initial equipment cost or doubling milking labor cost also improved annual net return of an AMS by up to 100 dollars/cow. Annual net return was reduced by 110 dollars/cow, though, if the economic life of the AMS was reduced by 3 yr for a more rapid depreciation than that normally used with traditional milking systems. Thus, under current assumptions, the economic return for an AMS was similar to that of new parlor systems on smaller farms when the milking capacity of the AMS was well matched to herd size and milk production level.

  18. Environmental effect of constructed wetland as biofuel production system

    Science.gov (United States)

    Liu, Dong

    2017-04-01

    Being as a renewable energy, biofuel has attracted worldwide attention. Clean biofuel production is an effective way to mitigate global climate change and energy crisis. Biofuel may offer a promising alternative to fossil fuels, but serious concerns arise about the adverse greenhouse gas consequences from using nitrogen fertilizers. Waste-nitrogen recycling is an attractive idea. Here we advocate a win-win approach to biofuel production which takes advantage of excessive nitrogen in domestic wastewater treated via constructed wetland (CW) in China. This study will carry on environmental effect analysis of CW as a biomass generation system through field surveys and controllable simulated experiments. This study intends to evaluate net energy balance, net greenhouse effect potential and ecosystem service of CW as biomass generation system, and make comparation with traditional wastewater treatment plant and other biofuel production systems. This study can provide a innovation mode in order to solve the dilemma between energy crops competed crops on production land and excessive nitrogen fertilizer of our traditional energy plant production. Data both from our experimental CWs in China and other researches on comparable CWs worldwide showed that the biomass energy yield of CWs can reach 182.3 GJ ha-1 yr-1, which was two to eight times higher than current biofuel-production systems. Energy output from CW was ˜137% greater than energy input for biofuel production. If CWs are designed with specific goal of biofuel production, biofuel production can be greatly enhanced through the optimization of N supply, hydraulic structures, and species selection in CWs. Assuming that 2.0 Tg (1 Tg = 1012 g) waste nitrogen contained in domestic wastewater is treated by CWs, biofuel production can account for 1.2% of national gasoline consumption in China. The proportion would increase to 6.7% if extra nitrogen (9.5 Tg) from industrial wastewater and agricultural runoff was included

  19. Production roll out plan for HANDI 2000 business management system

    Energy Technology Data Exchange (ETDEWEB)

    Adams, D.E.

    1998-09-29

    The Hanford Data Integration 2000 (HANDI 2000) Project will result in an integrated and comprehensive set of functional applications containing core information necessary to support the Project Hanford Management Contract (PHMC). It is based on the Commercial-Off-The-Shelf (COTS) product solution with commercially proven business processes. The COTS product solution set, of Passport (PP) and PeopleSoft (PS) software, supports finance, supply, human resources, and payroll activities under the current PHMC direction. The PP software is an integrated application for Accounts Payable, Contract Management, Inventory Management, Purchasing and Material Safety Data Sheets (MSDS). The PS software is an integrated application for Projects, General Ledger, Human Resources Training, Payroll, and Base Benefits. This set of software constitutes the Business Management System (BMS) and MSDS, a subset of the HANDI 2000 suite of systems. The primary objective of the Production Roll Out Plan is to communicate the methods and schedules for implementation and roll out to end users of BMS.

  20. Application of HACCP system in the ice cream production

    Directory of Open Access Journals (Sweden)

    Meho Bašić

    2005-01-01

    Full Text Available For enhancement of quality in all production segments, the ice cream factory «SA&JACOM» Sarajevo has made a decision to introduce a system of quality control and health safety for all of its products.Possible critical control points were analyzed and successfully specified, with hazard reduction to tolerant level, and in some cases with total hazard elimination. Using HACCP methodology, it is expected that the factory will produce the ice-creams with reliable preliminary established quality and accepted level of hygienic and health safety. All the activities are applied in a precise and documented way, so the products of this factory achieve trust of the customers and provide an official production certificate.

  1. Organic livestock production systems as a model of sustainability development

    Directory of Open Access Journals (Sweden)

    Mariano Pauselli

    2010-01-01

    Full Text Available Organic farming and livestock production offer effective means of satisfying consumer demand for healthy and safe foods and reducing the environmental pressure of agricultural production. In Mediterranean areas organic livestock production could be considered a feasible systems to improve rural development in unfavourable areas and to maintain rural landscape. Constrains, like pasture availability during the year, determine the evolution of different strategies in livestock rearing to improve or maintain net income of population. Moreover the evaluation of the sustainability using a holistic approach using assessment criteria like Life Cycle Assessment (LCA and Emergy Assessment could be considered models to evaluate organic and conventional livestock production sustainability and at the same time new research fields.

  2. Application of the suggestion system in the improvement of the production process and product quality control

    Science.gov (United States)

    Gołaś, H.; Mazur, A.; Gruszka, J.; Szafer, P.

    2016-08-01

    The elaboration is a case study and the research was carried out in the company Alco-Mot Ltd., which employs 120 people. The company specializes in the production of lead poles for industrial and traction batteries using gravity casting. The elements embedded in the cast are manufactured on a machining centre, which provides the stability of the process and of the dimensions of the product as well as a very short production time. As a result of observation and analysis the authors have developed a concept for the implementation of a dynamic suggestion system in ALCO-MOT, including, among others, a standard for actions in the implementation of the suggestion system, as well as clear guidelines for the processing and presentation of the activities undertaken in the time between the establishment of the concept (suggestions) and the benefits analysis after the proposed solutions have been implemented. The authors also present how suggestions proposed by ALCO-MOT staff contributed to the improvement of the processes of production and quality control. Employees offered more than 30 suggestions, of which more than a half are being implemented now and further actions are being prepared for implementation. The authors will present the results of improvements in, for example, tool replacement time, scrap reduction. The authors will present how kaizen can improve the production and quality control processes. They will present how the production and quality control processes looked before and after the implementation of employee suggestions.

  3. Smartfactory, a modular, low cost productivity monitoring system

    CSIR Research Space (South Africa)

    Bosscha, PA

    2010-07-01

    Full Text Available As a technology colony, South Africa has often had to rely on imported technologies to assist in the monitoring of production floor statistics. This results in high costs in both procurement and support of such systems. Whilst this is the accepted...

  4. DISTRIBUTED ELECTRICAL POWER PRODUCTION SYSTEM AND METHOD OF CONTROL THEREOF

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a distributed electrical power production system wherein two or more electrical power units comprise respective sets of power supply attributes. Each set of power supply attributes is associated with a dynamic operating state of a particular electrical power unit....

  5. Ohio Agricultural Business and Production Systems. Technical Competency Profile (TCP).

    Science.gov (United States)

    Ray, Gayl M.; Kershaw, Isaac; Mokma, Arnie

    This document describes the essential competencies from secondary through post-secondary associate degree programs for a career in agricultural business and production systems. Following an introduction, the Ohio College Tech Prep standards and program, and relevant definitions are described. Next are the technical competency profiles for these…

  6. Computational procedures for stochastic multi-echelon production systems

    NARCIS (Netherlands)

    Houtum, van G.J.J.A.; Zijm, W.H.M.

    1991-01-01

    This paper is concerned with the numerical evaluation of multi-echelon production systems. Each stage requires a fixed predetermined leadtime; furthermore, we assume a stochastic, stationary end-time demand process. In a previous paper, we have developed an analytical framework for determining optim

  7. Dynamic Gate Product and Artifact Generation from System Models

    Science.gov (United States)

    Jackson, Maddalena

    2011-01-01

    Model Based Systems Engineering (MBSE) is gaining acceptance as a way to formalize systems engineering practice through the use of models. The traditional method of producing and managing a plethora of disjointed documents and presentations ("Power-Point Engineering") has proven both costly and limiting as a means to manage the complex and sophisticated specifications of modern space systems. We have developed a tool and method to produce sophisticated artifacts as views and by-products of integrated models, allowing us to minimize the practice of "Power-Point Engineering" from model-based projects and demonstrate the ability of MBSE to work within and supersede traditional engineering practices. This paper describes how we have created and successfully used model-based document generation techniques to extract paper artifacts from complex SysML and UML models in support of successful project reviews. Use of formal SysML and UML models for architecture and system design enables production of review documents, textual artifacts, and analyses that are consistent with one-another and require virtually no labor-intensive maintenance across small-scale design changes and multiple authors. This effort thus enables approaches that focus more on rigorous engineering work and less on "PowerPoint engineering" and production of paper-based documents or their "office-productivity" file equivalents.

  8. Trends in global nitrous oxide emissions from animal production systems

    NARCIS (Netherlands)

    Oenema, O.; Wrage, N.; Velthof, G.L.; Groenigen, van J.W.; Dolfing, J.; Kuikman, P.J.

    2005-01-01

    Wastes from animal production systems contribute as much as 30-50% to the global N2O emissions from agriculture, but relatively little attention has been given on improving the accuracy of the estimates and on developing mitigation options. This paper discusses trends and uncertainties in global N2O

  9. Re-engineering production systems: the Royal Netherlands Naval Dockyard

    NARCIS (Netherlands)

    Zijm, Willem H.M.

    1996-01-01

    Reengineering production systems in an attempt to meet tight cost, quality and leadtime standards has received considerable attention in the last decade. In this paper, we discuss the reengineering process at the Royal Netherlands Naval Dockyard. The process starts with a characterisation and a

  10. Continuous hydroponic wheat production using a recirculating system

    Science.gov (United States)

    Mackowiak, C. L.; Owens, L. P.; Hinkle, C. R.; Prince, R. P.

    1989-01-01

    Continuous crop production, where plants of various ages are growing simultaneously in a single recirculating nutrient solution, is a possible alternative to batch production in a Controlled Ecological Life Support System. A study was conducted at John F. Kennedy Space Center where 8 trays (0.24 sq m per tray) of Triticum aestivum L. Yecora Rojo were grown simultaneously in a growth chamber at 23 C, 65 percent relative humidity, 1000 ppm CO2, continuous light, with a continuous flow, thin film nutrient delivery system. The same modified Hoagland nutrient solution was recirculated through the plant trays from an 80 L reservoir throughout the study. It was maintained by periodic addition of water and nutrients based on chemical analyses of the solution. The study was conducted for 216 days, during which 24 trays of wheat were consecutively planted (one every 9 days), 16 of which were grown to maturity and harvested. The remaining 8 trays were harvested on day 216. Grain yields averaged 520 g m(exp -2), and had an average edible biomass of 32 percent. Consecutive yields were unaffected by nutrient solution age. It was concluded that continual wheat production will work in this system over an extended period of time. Certain micronutrient deficiencies and toxicities posed problems and must be addressed in future continuous production systems.

  11. Possibilities and limitations for sustainable bioenergy production systems

    NARCIS (Netherlands)

    Smeets, E.M.W.

    2008-01-01

    The focus of this thesis is on the possibilities and limitations of sustainable bioenergy production systems. First, the potential contribution of bioenergy to the energy supply in different world regions in the year 2050 from different biomass sources (dedicated woody energy crops, residues and was

  12. Possibilities and limitations for sustainable bioenergy production systems

    NARCIS (Netherlands)

    Smeets, E.M.W.

    2008-01-01

    The focus of this thesis is on the possibilities and limitations of sustainable bioenergy production systems. First, the potential contribution of bioenergy to the energy supply in different world regions in the year 2050 from different biomass sources (dedicated woody energy crops, residues and

  13. Integrating Sunflower Oil Seed Crops into Florida Horticultural Production Systems

    Science.gov (United States)

    Locally produced biodiesel feedstock plant oil creates a unique possibility to integrate multiple-goal oriented cover crops into Florida horticultural production systems. Typically, cover crops are planted to improve soil fertility and the natural suppression of soilborne pests at times when fields...

  14. Autocorrelation in queuing network-type production systems - revisited

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn

    2007-01-01

    In managing production systems, a strong emphasis is placed on the reduction of variance in specific transformation processes (e.g. for quality control purposes) and on controlling the level of variability in general, as for instance with the Bullwhip effect. However, the possible disturbing...

  15. Controlling nitrous oxide emissions from grassland livestock production systems

    NARCIS (Netherlands)

    Oenema, O.; Gebauer, G.; Rodriguez, M.; Sapek, A.; Jarvis, S.C.; Corré, W.J.; Yamulki, S.

    1998-01-01

    There is growing awareness that grassland livestock production systems are major sources of nitrous oxide (N2O). Controlling these emissions requires a thorough understanding of all sources and controlling factors at the farm level. This paper examines the various controlling factors and proposes

  16. Production management information system in wood processing and furniture manufacture

    Directory of Open Access Journals (Sweden)

    Tomislav Grladinović

    2007-11-01

    Full Text Available Introduction of a production management information system is one of the ways that could help the management to increase its efficiency. It should enable the monitoring of the whole business of a firm through co-ordination in the process of collecting and using information.

  17. Cost-efficiency of animal welfare in broiler production systems

    NARCIS (Netherlands)

    Gocsik, Éva; Brooshooft, Suzanne D.; Jong, de Ingrid C.; Saatkamp, Helmut W.

    2016-01-01

    Broiler producers operate in a highly competitive and cost-price driven environment. In addition, in recent years the societal pressure to improve animal welfare (AW) in broiler production systems is increasing. Hence, from an economic and decision making point of view, the cost-efficiency of imp

  18. Biogas production from poultry rendering plant anaerobic digesters: systems comparison

    Science.gov (United States)

    Animal wastes can serve as the feedstock for biogas production (mainly methane) that could be used as alternative energy source. The green energy derived from animal wastes is considered to be carbon neutral and offsetting those generated from fossil fuels. In this study, an evaluation of system p...

  19. Short-term robustness of production management systems

    NARCIS (Netherlands)

    Kleijnen, J.P.C.; Gaury, E.G.A.

    1998-01-01

    Short-term performance of a production management system for make-to-stock factories may be quantified through the service rate per shift; long-term performance through the average monthly work in process (WIP). This may yield, for example, that WIP is minimized, while the probability of the service

  20. System development for outdoor soilless production of leek (Allium Porrum)

    NARCIS (Netherlands)

    Os, van E.A.; Weel, van P.A.; Bruins, M.A.; Wilms, J.A.M.; Haan, de J.J.; Verhoeven, J.T.W.

    2012-01-01

    Current open field vegetable production systems in The Netherlands do not meet market and society demands. Among the most important demands are: (1) the EU Water Framework Directive, requesting strong reductions in emissions of nutrients and pesticides to surface- and groundwater; (2) continuous del