Characterisation of the nitrile biocatalytic activity of rhodococcus rhodochrous ATCC BAA-870

CSIR Research Space (South Africa)

Frederick, J

2006-10-01

Full Text Available rhodochrous ATCC BAA-870, was explored. The biocatalyst expressed a two enzyme system with sequential nitrile-converting activity: nitrile hydratase and amidase. This biocatalytic nitrile hydrolysis affords valuable applications in industry, including...

Characterisation of nitrilase and nitrile hydratase biocatalytic systems

CSIR Research Space (South Africa)

Brady, D

2004-03-01

Full Text Available (Faber 1992; Vogel 1989; Weiner and Chaplin 2000). Other nitrile compounds Many nitrile substrates were available from the laboratory com- pound inventory. All other substrates were obtained from Acros or Sigma. Analytical methods A Chromolith... regioselectivity for converting aromatic nitriles to the corresponding acid, but was also capable of hydrolys- ing aliphatic nitriles (Cohen et al. 1990). This catalytic capacity of Rhodococcus Novo SP361 for a broad substrate range was also observed...

Activity Enhancement Based on the Chemical Equilibrium of Multiple-Subunit Nitrile Hydratase from Bordetella petrii.

Science.gov (United States)

Liu, Yi; Liu, Ping; Lin, Lu; Zhao, Yueqin; Zhong, Wenjuan; Wu, Lunjie; Zhou, Zhemin; Sun, Weifeng

2016-09-01

The maturation mechanism of nitrile hydratase (NHase) of Pseudomonas putida NRRL-18668 was discovered and named as "self-subunit swapping." Since the NHase of Bordetella petrii DSM 12804 is similar to that of P. putida, the NHase maturation of B. petrii is proposed to be the same as that of P. putida. However, there is no further information on the application of NHase according to these findings. We successfully rapidly purified NHase and its activator through affinity his tag, and found that the cell extracts of NHase possessed multiple types of protein ingredients including α, β, α2β2, and α(P14K)2 who were in a state of chemical equilibrium. Furthermore, the activity was significantly enhanced through adding extra α(P14K)2 to the cell extracts of NHase according to the chemical equilibrium. Our findings are useful for the activity enhancement of multiple-subunit enzyme and for the first time significantly increased the NHase activity according to the chemical equilibrium.

Biotransformation of nitriles to hydroxamic acids via a nitrile hydratase–amidase cascade reaction

Czech Academy of Sciences Publication Activity Database

Vejvoda, Vojtěch; Martínková, Ludmila; Veselá, Alicja Barbara; Kaplan, Ondřej; Lutz-Wahl, S.; Fischer, L.; Uhnáková, Bronislava

2011-01-01

Roč. 71, 1-2 (2011), s. 51-55 ISSN 1381-1177 R&D Projects: GA MŠk(CZ) LC06010; GA MŠk OC09046 Institutional research plan: CEZ:AV0Z50200510 Keywords : Nitrile hydratase * Rhodococcus erythropolis * Amidase Subject RIV: EE - Microbiology, Virology Impact factor: 2.735, year: 2011

[Transformation of 2- and 4-cyanopyridines by free and immobilized cells of nitrile-hydrolyzing bacteria].

Science.gov (United States)

Maksimova, Iu G; Vasil'ev, D M; Ovechkina, G V; Maksimov, A Iu; Demakov, V A

2013-01-01

The transformation dynamics of 2- and 4-cyanopyridines by cells suspended and adsorbed on inorganic carriers has been studied in the Rhodococcus ruber gt 1 strain possessing nitrile hydratase activity and the Pseudomonas fluorescens C2 strain containing nitrilase. It was shown that both nitrile hydratase and nitrilase activities of immobilized cells against 2-cyanopyridine were 1.5-4 times lower compared to 4-cyanopyridine and 1.6-2 times lower than the activities of free cells against 2-cyanpopyridine. The possibility of obtaining isonicotinic acid during the combined conversion of 4-cyanopyridine by a mixed suspension of R. ruber gt 1 cells with a high level of nitrile hydratase activity and R. erythropolis 11-2 cells with a pronounced activity of amidase has been shown. Immobilization of Rhodococcus cells on raw coal and Pseudomonas cells on china clay was shown to yield a heterogeneous biocatalyst for the efficient transformation of cyanopyridines into respective amides and carbonic acids.

Self-subunit swapping occurs in another gene type of cobalt nitrile hydratase.

Directory of Open Access Journals (Sweden)

Yi Liu

Full Text Available Self-subunit swapping is one of the post-translational maturation of the cobalt-containing nitrile hydratase (Co-NHase family of enzymes. All of these NHases possess a gene organization of , which allows the activator protein to easily form a mediatory complex with the α-subunit of the NHase after translation. Here, we discovered that the incorporation of cobalt into another type of Co-NHase, with a gene organization of , was also dependent on self-subunit swapping. We successfully isolated a recombinant NHase activator protein (P14K of Pseudomonas putida NRRL-18668 by adding a Strep-tag N-terminal to the P14K gene. P14K was found to form a complex [α(StrepP14K(2] with the α-subunit of the NHase. The incorporation of cobalt into the NHase of P. putida was confirmed to be dependent on the α-subunit substitution between the cobalt-containing α(StrepP14K(2 and the cobalt-free NHase. Cobalt was inserted into cobalt-free α(StrepP14K(2 but not into cobalt-free NHase, suggesting that P14K functions not only as a self-subunit swapping chaperone but also as a metallochaperone. In addition, NHase from P. putida was also expressed by a mutant gene that was designed with a order. Our findings expand the general features of self-subunit swapping maturation.

Biotransformation of nitriles by Rhodococcus equi A4 immobilized in LentiKats

Czech Academy of Sciences Publication Activity Database

Kubáč, David; Čejková, A.; Masák, J.; Jirků, V.; Lemaire, M.; Gallienne, E.; Bolte, J.; Stloukal, R.; Martínková, Ludmila

2006-01-01

Roč. 39, - (2006), s. 59-61 ISSN 1381-1177 R&D Projects: GA ČR GA203/05/2267; GA MŠk OC D25.001; GA AV ČR IAA4020213 Institutional research plan: CEZ:AV0Z50200510 Keywords : nitrile hydratase * amidase * nitriles Subject RIV: EE - Microbiology, Virology Impact factor: 2.149, year: 2006

Catalytic Mechanism of Nitrile Hydratase Proposed by Time-resolved X-ray Crystallography Using a Novel Substrate, tert-Butylisonitrile*S⃞

Science.gov (United States)

Hashimoto, Koichi; Suzuki, Hiroyuki; Taniguchi, Kayoko; Noguchi, Takumi; Yohda, Masafumi; Odaka, Masafumi

2008-01-01

Nitrile hydratases (NHases) have an unusual iron or cobalt catalytic center with two oxidized cysteine ligands, cysteine-sulfinic acid and cysteine-sulfenic acid, catalyzing the hydration of nitriles to amides. Recently, we found that the NHase of Rhodococcus erythropolis N771 exhibited an additional catalytic activity, converting tert-butylisonitrile (tBuNC) to tert-butylamine. Taking advantage of the slow reactivity of tBuNC and the photoreactivity of nitrosylated NHase, we present the first structural evidence for the catalytic mechanism of NHase with time-resolved x-ray crystallography. By monitoring the reaction with attenuated total reflectance-Fourier transform infrared spectroscopy, the product from the isonitrile carbon was identified as a CO molecule. Crystals of nitrosylated inactive NHase were soaked with tBuNC. The catalytic reaction was initiated by photo-induced denitrosylation and stopped by flash cooling. tBuNC was first trapped at the hydrophobic pocket above the iron center and then coordinated to the iron ion at 120 min. At 440 min, the electron density of tBuNC was significantly altered, and a new electron density was observed near the isonitrile carbon as well as the sulfenate oxygen of αCys114. These results demonstrate that the substrate was coordinated to the iron and then attacked by a solvent molecule activated by αCys114-SOH. PMID:18948265

Effect of growth media on cell envelope composition and nitrile hydratase stability in Rhodococcus rhodochrous strain DAP 96253.

Science.gov (United States)

Tucker, Trudy-Ann; Crow, Sidney A; Pierce, George E

2012-11-01

Rhodococcus is an important industrial microorganism that possesses diverse metabolic capabilities; it also has a cell envelope, composed of an outer layer of mycolic acids and glycolipids. Selected Rhodococcus species when induced are capable of transforming nitriles to the corresponding amide by the enzyme nitrile hydratase (NHase), and subsequently to the corresponding acid via an amidase. This nitrile biochemistry has generated interest in using the rhodococci as biocatalysts. It was hypothesized that altering sugars in the growth medium might impact cell envelope components and have effects on NHase. When the primary carbon source in growth media was changed from glucose to fructose, maltose, or maltodextrin, the NHase activity increased. Cells grown in the presence of maltose and maltodextrin showed the highest activities against propionitrile, 197 and 202 units/mg cdw, respectively. Stability of NHase was also affected as cells grown in the presence of maltose and maltodextrin retained more NHase activity at 55 °C (45 and 23 %, respectively) than cells grown in the presence of glucose or fructose (19 and 10 %, respectively). Supplementation of trehalose in the growth media resulted in increased NHase stability at 55 °C, as cells grown in the presence of glucose retained 40 % NHase activity as opposed to 19 % without the presence of trehalose. Changes in cell envelope components, such mycolic acids and glycolipids, were evaluated by high-performance liquid chromatography (HPLC) and thin-layer chromatography (TLC), respectively. Changing sugars and the addition of inducing components for NHase, such as cobalt and urea in growth media, resulted in changes in mycolic acid profiles. Mycolic acid content increased 5 times when cobalt and urea were added to media with glucose. Glycolipids levels were also affected by the changes in sugars and addition of inducing components. This research demonstrates that carbohydrate selection impacts NHase activity and

Selective biotransformation of substituted alicyclic nitriles by Rhodococcus equi A4

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Klempier, N.; Preiml, M.; Ovesná, Mária; Kuzma, Marek; Mylerová, Veronika; Křen, Vladimír

2002-01-01

Roč. 80, - (2002), s. 724-727 ISSN 0008-4042 R&D Projects: GA ČR GA524/00/1275; GA AV ČR IAA4020802 Keywords : nitrile hydratase * substituted cyclohexanecarbonitriles * cyclopentanecarbonitriles Subject RIV: EE - Microbiology, Virology Impact factor: 1.260, year: 2002

Selection and screening for enzymes of nitrile metabolism

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Vejvoda, Vojtěch; Křen, Vladimír

2008-01-01

Roč. 133, č. 3 (2008), s. 318-326 ISSN 0168-1656 R&D Projects: GA AV ČR IAA500200708; GA ČR GA203/05/2267; GA MŠk(CZ) LC06010; GA MŠk OC 171 Institutional research plan: CEZ:AV0Z50200510 Keywords : nitrilase * nitrile hydratase * amidase Subject RIV: CE - Biochemistry Impact factor: 2.748, year: 2008

[Applications of nitrile converting enzymes in the production of fine chemicals].

Science.gov (United States)

Zheng, Yuguo; Xue, Yaping; Liu, Zhiqiang; Zheng, Renchao; Shen, Yinchu

2009-12-01

Nitriles are an important type of synthetic intermediates in the production of fine chemicals because of their easy preparations and versatile transformations. The traditional chemical conversion of nitriles to carboxylic acids and amides is feasible but it requires relatively harsh conditions of heat, acid or alkali. Nitrile converting enzymes (nitrilase, nitrile hydratase and amidase) which are used as biocatalyst for the production of fine chemicals have attracted substantial interest because of their ability to convert readily available nitriles into the corresponding higher value amides or acids under mild conditions with excellent chemo-, regio- and stereo-selectivities. Many nitrile converting enzymes have been explored and widely used for the production of fine chemicals. In this paper, various examples of biocatalytic synthesis of pharmaceuticals and their intermediates, agrochemicals and their intermediates, food and feed additives, and other fine chemicals are presented. In the near future, an increasing number of novel nitrile converting enzymes will be screened and their potential in the production of useful fine chemicals will be further exploited.

Nitrile Hydratase CLEAs: The immobilization and stabilization of an industrially important enzyme

Czech Academy of Sciences Publication Activity Database

van Pelt, S.; Quignard, S.; Kubáč, David; Sorokin, D. Y.; van Rantwijk, F.; Sheldon, R. A.

2008-01-01

Roč. 10, č. 4 (2008), s. 395-400 ISSN 1463-9262 R&D Projects: GA MŠk OC D25.002 Institutional research plan: CEZ:AV0Z50200510 Keywords : nitrilase hydratase * clea * cross-linking Subject RIV: CE - Biochemistry Impact factor: 4.542, year: 2008

A high-throughput screening strategy for nitrile-hydrolyzing enzymes based on ferric hydroxamate spectrophotometry.

Science.gov (United States)

He, Yu-Cai; Ma, Cui-Luan; Xu, Jian-He; Zhou, Li

2011-02-01

Nitrile-hydrolyzing enzymes (nitrilase or nitrile hydratase/amidase) have been widely used in the pharmaceutical industry for the production of carboxylic acids and their derivatives, and it is important to build a method for screening for nitrile-hydrolyzing enzymes. In this paper, a simple, rapid, and high-throughput screening method based on the ferric hydroxamate spectrophotometry has been proposed. To validate the accuracy of this screening strategy, the nitrilases from Rhodococcus erythropolis CGMCC 1.2362 and Alcaligenes sp. ECU0401 were used for evaluating the method. As a result, the accuracy for assaying aliphatic and aromatic carboxylic acids was as high as the HPLC-based method. Therefore, the method may be potentially used in the selection of microorganisms or engineered proteins with nitrile-hydrolyzing enzymes.

Enantioselective biotransformations of nitriles in organic synthesis.

Science.gov (United States)

Wang, Mei-Xiang

2015-03-17

The hydration and hydrolysis of nitriles are valuable synthetic methods used to prepare carboxamides and carboxylic acids. However, chemical hydration and hydrolysis of nitriles involve harsh reaction conditions, have low selectivity, and generate large amounts of waste. Therefore, researchers have confined the scope of these reactions to simple nitrile substrates. However, biological transformations of nitriles are highly efficient, chemoselective, and environmentally benign, which has led synthetic organic chemists and biotechologists to study these reactions in detail over the last two decades. In nature, biological systems degrade nitriles via two distinct pathways: nitrilases catalyze the direct hydrolysis of nitriles to afford carboxylic acids with release of ammonia, and nitrile hydratases catalyze the conversion of nitriles into carboxamides, which then furnish carboxylic acids via hydrolysis in the presence of amidases. Researchers have subsequently developed biocatalytic methods into useful industrial processes for the manufacture of commodity chemicals, including acrylamide. Since the late 1990s, research by my group and others has led to enormous progress in the understanding and application of enantioselective biotransformations of nitriles in organic synthesis. In this Account, I summarize the important advances in enantioselective biotransformations of nitriles and amides, with a primary focus on research from my laboratory. I describe microbial whole-cell-catalyzed kinetic resolution of various functionalized nitriles, amino- and hydroxynitriles, and nitriles that contain small rings and the desymmetrization of prochiral and meso dinitriles and diamides. I also demonstrate how we can apply the biocatalytic protocol to synthesize natural products and bioactive compounds. These nitrile biotransformations offer an attractive and unique protocol for the enantioselective synthesis of polyfunctionalized organic compounds that are not readily obtainable by

Nitrile-converting enzymes as a tool to improve biocatalysis in organic synthesis: recent insights and promises.

Science.gov (United States)

Gong, Jin-Song; Shi, Jin-Song; Lu, Zhen-Ming; Li, Heng; Zhou, Zhe-Min; Xu, Zheng-Hong

2017-02-01

Nitrile-converting enzymes, including nitrilase and nitrile hydratase (NHase), have received increasing attention from researchers of industrial biocatalysis because of their critical role as a tool in organic synthesis of carboxylic acids and amides from nitriles. To date, these bioconversion approaches are considered as one of the most potential industrial processes using resting cells or purified enzymes as catalysts for production of food additives, pharmaceutical, and agrochemical precursors. This review focuses on the distribution and catalytic mechanism research of nitrile-converting enzymes in recent years. Molecular biology aspects to improve the biocatalytic performance of microbial nitrilase and NHase are demonstrated. The process developments of microbial nitrilase and NHase for organic synthesis are also discussed.

Biotransformation of 3-substituted methyl (R,S)-4-cyanobutanoates with nitrile- and amide-converting biocatalysts

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Klempier, N.; Bardakji, J.; Kandelbauer, A.; Ovesná, M.; Podařilová, T.; Kuzma, Marek; Přepechalová, Irena; Griengl, G.; Křen, Vladimír

2001-01-01

Roč. 14, - (2001), s. 95-99 ISSN 1381-1177 R&D Projects: GA AV ČR IAA4020802 Institutional research plan: CEZ:AV0Z5020903 Keywords : Rhodococcus equi * nitrile hydratase * amidase Subject RIV: EE - Microbiology, Virology Impact factor: 1.408, year: 2001

Biotransformation of benzonitrile herbicides via the nitrile hydratase-amidase pathway in rhodococci.

Science.gov (United States)

Veselá, Alicja B; Pelantová, Helena; Sulc, Miroslav; Macková, Martina; Lovecká, Petra; Thimová, Markéta; Pasquarelli, Fabrizia; Pičmanová, Martina; Pátek, Miroslav; Bhalla, Tek Chand; Martínková, Ludmila

2012-12-01

The aim of this work was to determine the ability of rhodococci to transform 3,5-dichloro-4-hydroxybenzonitrile (chloroxynil), 3,5-dibromo-4-hydroxybenzonitrile (bromoxynil), 3,5-diiodo-4-hydroxybenzonitrile (ioxynil) and 2,6-dichlorobenzonitrile (dichlobenil); to identify the products and determine their acute toxicities. Rhodococcus erythropolis A4 and Rhodococcus rhodochrous PA-34 converted benzonitrile herbicides into amides, but only the former strain was able to hydrolyze 2,6-dichlorobenzamide into 2,6-dichlorobenzoic acid, and produced also more of the carboxylic acids from the other herbicides compared to strain PA-34. Transformation of nitriles into amides decreased acute toxicities for chloroxynil and dichlobenil, but increased them for bromoxynil and ioxynil. The amides inhibited root growth in Lactuca sativa less than the nitriles but more than the acids. The conversion of the nitrile group may be the first step in the mineralization of benzonitrile herbicides but cannot be itself considered to be a detoxification.

Enhancement of thermo-stability and product tolerance of Pseudomonas putida nitrile hydratase by fusing with self-assembling peptide.

Science.gov (United States)

Liu, Yi; Cui, Wenjing; Liu, Zhongmei; Cui, Youtian; Xia, Yuanyuan; Kobayashi, Michihiko; Zhou, Zhemin

2014-09-01

Self-assembling amphipathic peptides (SAPs) are the peptides that can spontaneously assemble into ordered nanostructures. It has been reported that the attachment of SAPs to the N- or C-terminus of an enzyme can benefit the thermo-stability of the enzyme. Here, we discovered that the thermo-stability and product tolerance of nitrile hydratase (NHase) were enhanced by fusing with two of the SAPs (EAK16 and ELK16). When the ELK16 was fused to the N-terminus of β-subunit, the resultant NHase (SAP-NHase-2) became an active inclusion body; EAK16 fused NHase in the N-terminus of β-subunit (SAP-NHase-1) and ELK16 fused NHase in the C-terminus of β-subunit (SAP-NHase-10) did not affect NHase solubility. Compared with the deactivation of the wild-type NHase after 30 min incubation at 50°C, SAP-NHase-1, SAP-NHase-2 and SAP-NHase-10 retained 45%, 30% and 50% activity; after treatment in the buffer containing 10% acrylamide, the wild-type retained 30% activity, while SAP-NHase-1, SAP-NHase-2 and SAP-NHase-10 retained 52%, 42% and 55% activity. These SAP-NHases with enhanced thermo-stability and product tolerance would be helpful for further industrial applications of the NHase. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

High-yield continuous production of nicotinic acid via nitrile hydratase–amidase cascade reactions using cascade CSMRs

Czech Academy of Sciences Publication Activity Database

Cantarella, L.; Gallifuoco, A.; Malandra, A.; Martínková, Ludmila; Spera, A.; Cantarella, M.

2011-01-01

Roč. 48, 4-5 (2011), 345-350 ISSN 0141-0229 R&D Projects: GA MŠk OC09046 Institutional research plan: CEZ:AV0Z50200510 Keywords : Nitrile hydratase-amidase cascade system * 3-Cyanopyridine bioconversion * Nicotinic acid Subject RIV: EE - Microbiology, Virology Impact factor: 2.367, year: 2011

GenBank blastx search result: AK059236 [KOME

Lifescience Database Archive (English)

Full Text Available AK059236 001-024-F01 AB016078.1 Rhodococcus sp. N-771 genes for nitrile hydratase r...egulator 2 and 1, amidase, nitrile hydratase alpha and beta subunits and nitrile hydratase activator, complete cds.|BCT BCT 8e-18 +3 ...

GenBank blastx search result: AK243402 [KOME

Lifescience Database Archive (English)

Full Text Available AK243402 J100064O18 AB016078.1 AB016078 Rhodococcus sp. N-771 genes for nitrile hyd...ratase regulator 2 and 1, amidase, nitrile hydratase alpha and beta subunits and nitrile hydratase activator, complete cds. BCT 1e-27 1 ...

Nitrile-synthesizing enzyme: Gene cloning, overexpression and application for the production of useful compounds.

Science.gov (United States)

Kumano, Takuto; Takizawa, Yuko; Shimizu, Sakayu; Kobayashi, Michihiko

2016-09-12

One of the nitrile-synthesizing enzymes, β-cyano-L-alanine synthase, catalyzes β-cyano-L-alanine (β-CNAla) from potassium cyanide and O-acetyl-L-serine or L-cysteine. We have identified this enzyme from Pseudomonas ovalis No. 111. In this study, we cloned the β-CNAla synthase gene and expressed it in Escherichia coli and Rhodococcus rhodochrous. Furthermore, we carried out co-expression of β-CNAla synthase with nitrilase or nitrile hydratases in order to synthesize aspartic acid and asparagine from KCN and O-acetyl-L-serine. This strategy can be used for the synthesis of labeled amino acids by using a carbon-labeled KCN as a substrate, resulting in an application for positron emission tomography.

Application of continuous stirred membrane reactor to 3-cyanopyridine bioconversion using the nitrile hydratase–amidase cascade system of Microbacterium imperiale CBS 498-74

Czech Academy of Sciences Publication Activity Database

Cantarella, L.; Gallifuoco, A.; Malandra, A.; Martínková, Ludmila; Pasquarelli, F.; Spera, A.; Cantarella, M.

2010-01-01

Roč. 47, č. 3 (2010), s. 64-70 ISSN 0141-0229 R&D Projects: GA MŠk OC09046 Institutional research plan: CEZ:AV0Z50200510 Keywords : Nitrile hydratase-amidase cascade system * 3-Cyanopyridine bioconversion * Nicotinamide Subject RIV: EE - Microbiology, Virology Impact factor: 2.287, year: 2010

Carbohydrates as efficient catalysts for the hydration of α-amino nitriles.

Science.gov (United States)

Chitale, Sampada; Derasp, Joshua S; Hussain, Bashir; Tanveer, Kashif; Beauchemin, André M

2016-11-01

Directed hydration of α-amino nitriles was achieved under mild conditions using simple carbohydrates as catalysts exploiting temporary intramolecularity. A broadly applicable procedure using both formaldehyde and NaOH as catalysts efficiently hydrated a variety of primary and secondary susbtrates, and allowed the hydration of enantiopure substrates to proceed without racemization. This work also provides a rare comparison of the catalytic activity of carbohydrates, and shows that the simple aldehydes at the basis of chemical evolution are efficient organocatalysts mimicking the function of hydratase enzymes. Optimal catalytic efficiency was observed with destabilized aldehydes, and with difficult substrates only simple carbohydrates such as formaldehyde and glycolaldehyde proved reliable.

Recombinant expression, purification and biochemical characterization of kievitone hydratase from Nectria haematococca.

Directory of Open Access Journals (Sweden)

Matthias Engleder

Full Text Available Kievitone hydratase catalyzes the addition of water to the double bond of the prenyl moiety of plant isoflavonoid kievitone and, thereby, forms the tertiary alcohol hydroxy-kievitone. In nature, this conversion is associated with a defense mechanism of fungal pathogens against phytoalexins generated by host plants after infection. As of today, a gene sequence coding for kievitone hydratase activity has only been identified and characterized in Fusarium solani f. sp. phaseoli. Here, we report on the identification of a putative kievitone hydratase sequence in Nectria haematococca (NhKHS, the teleomorph state of F. solani, based on in silico sequence analyses. After heterologous expression of the enzyme in the methylotrophic yeast Pichia pastoris, we have confirmed its kievitone hydration activity and have assessed its biochemical properties and substrate specificity. Purified recombinant NhKHS is obviously a homodimeric glycoprotein. Due to its good activity for the readily available chalcone derivative xanthohumol (XN, this compound was selected as a model substrate for biochemical studies. The optimal pH and temperature for hydratase activity were 6.0 and 35°C, respectively, and apparent Vmax and Km values for hydration of XN were 7.16 μmol min-1 mg-1 and 0.98 ± 0.13 mM, respectively. Due to its catalytic properties and apparent substrate promiscuity, NhKHS is a promising enzyme for the biocatalytic production of tertiary alcohols.

Bio-Inspired Nitrile Hydration by Peptidic Ligands Based on L-Cysteine, L-Methionine or L-Penicillamine and Pyridine-2,6-dicarboxylic Acid

Directory of Open Access Journals (Sweden)

Cillian Byrne

2014-12-01

Full Text Available Nitrile hydratase (NHase, EC 4.2.1.84 is a metalloenzyme which catalyses the conversion of nitriles to amides. The high efficiency and broad substrate range of NHase have led to the successful application of this enzyme as a biocatalyst in the industrial syntheses of acrylamide and nicotinamide and in the bioremediation of nitrile waste. Crystal structures of both cobalt(III- and iron(III-dependent NHases reveal an unusual metal binding motif made up from six sequential amino acids and comprising two amide nitrogens from the peptide backbone and three cysteine-derived sulfur ligands, each at a different oxidation state (thiolate, sulfenate and sulfinate. Based on the active site geometry revealed by these crystal structures, we have designed a series of small-molecule ligands which integrate essential features of the NHase metal binding motif into a readily accessible peptide environment. We report the synthesis of ligands based on a pyridine-2,6-dicarboxylic acid scaffold and L-cysteine, L-S-methylcysteine, L-methionine or L-penicillamine. These ligands have been combined with cobalt(III and iron(III and tested as catalysts for biomimetic nitrile hydration. The highest levels of activity are observed with the L-penicillamine ligand which, in combination with cobalt(III, converts acetonitrile to acetamide at 1.25 turnovers and benzonitrile to benzamide at 1.20 turnovers.

Metabolic reconstructions identify plant 3-methylglutaconyl-CoA hydratase that is crucial for branched-chain amino acid catabolism in mitochondria.

Science.gov (United States)

Latimer, Scott; Li, Yubing; Nguyen, Thuong T H; Soubeyrand, Eric; Fatihi, Abdelhak; Elowsky, Christian G; Block, Anna; Pichersky, Eran; Basset, Gilles J

2018-05-09

The proteinogenic branched-chain amino acids (BCAAs) leucine, isoleucine and valine are essential nutrients for mammals. In plants, BCAAs double as alternative energy sources when carbohydrates become limiting, the catabolism of BCAAs providing electrons to the respiratory chain and intermediates to the tricarboxylic acid cycle. Yet, the actual architecture of the degradation pathways of BCAAs is not well understood. In this study, gene network modeling in Arabidopsis and rice, and plant-prokaryote comparative genomics detected candidates for 3-methylglutaconyl-CoA hydratase (4.2.1.18), one of the missing plant enzymes of leucine catabolism. Alignments of these protein candidates sampled from various spermatophytes revealed non-homologous N-terminal extensions that are lacking in their bacterial counterparts, and green fluorescent protein-fusion experiments demonstrated that the Arabidopsis protein, product of gene At4g16800, is targeted to mitochondria. Recombinant At4g16800 catalyzed the dehydration of 3-hydroxymethylglutaryl-CoA into 3-methylglutaconyl-CoA, and displayed kinetic features similar to those of its prokaryotic homolog. When at4g16800 knockout plants were subjected to dark-induced carbon starvation, their rosette leaves displayed accelerated senescence as compared to control plants, and this phenotype was paralleled by a marked increase in the accumulation of free and total leucine, isoleucine and valine. The seeds of the at4g16800 mutant showed a similar accumulation of free BCAAs. These data suggest that 3-methylglutaconyl-CoA hydratase is not solely involved in the degradation of leucine, but is also a significant contributor to that of isoleucine and valine. Furthermore, evidence is shown that unlike the situation observed in Trypanosomatidae, leucine catabolism does not contribute to the formation of the terpenoid precursor mevalonate. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights

Nitrile-specifier Proteins Involved in Glucosinolate Hydrolysis in Arabidopsis thaliana*S⃞

Science.gov (United States)

Kissen, Ralph; Bones, Atle M.

2009-01-01

Glucosinolates are plant secondary metabolites present in Brassicaceae plants such as the model plant Arabidopsis thaliana. Intact glucosinolates are believed to be biologically inactive, whereas degradation products after hydrolysis have multiple roles in growth regulation and defense. The degradation of glucosinolates is catalyzed by thioglucosidases called myrosinases and leads by default to the formation of isothiocyanates. The interaction of a protein called epithiospecifier protein (ESP) with myrosinase diverts the reaction toward the production of epithionitriles or nitriles depending on the glucosinolate structure. Here we report the identification of a new group of nitrile-specifier proteins (AtNSPs) in A. thaliana able to generate nitriles in conjunction with myrosinase and a more detailed characterization of one member (AtNSP2). Recombinant AtNSP2 expressed in Escherichia coli was used to test its impact on the outcome of glucosinolate hydrolysis using a gas chromatography-mass spectrometry approach. AtNSP proteins share 30–45% sequence homology with A. thaliana ESP. Although AtESP and AtNSP proteins can switch myrosinase-catalyzed degradation of 2-propenylglucosinolate from isothiocyanate to nitrile, only AtESP generates the corresponding epithionitrile. Using the aromatic benzylglucosinolate, recombinant AtNSP2 is also able to direct product formation to the nitrile. Analysis of glucosinolate hydrolysis profiles of transgenic A. thaliana plants overexpressing AtNSP2 confirms its nitrile-specifier activity in planta. In silico expression analysis reveals distinctive expression patterns of AtNSPs, which supports a biological role for these proteins. In conclusion, we show that AtNSPs belonging to a new family of A. thaliana proteins structurally related to AtESP divert product formation from myrosinase-catalyzed glucosinolate hydrolysis and, thereby, likely affect the biological consequences of glucosinolate degradation. We discuss similarities and

Preconditioning with subneurotoxic allyl nitrile: protection against allyl nitrile neurotoxicity.

Science.gov (United States)

Tanii, H; Higashi, T; Saijoh, K

2010-02-01

High-dose cruciferous allyl nitrile can induce behavioral abnormalities in rodents, while repeated exposure to allyl nitrile at subneurotoxic levels can increase phase 2 detoxification enzymes in many tissues, although the brain has not been investigated yet. In the present study, we examined the effect of 5 days repeated exposure to subneurotoxic allyl nitrile (0-400 micromol/kg/day) on the brain. Elevated glutathione S-transferase activity was recorded in the striatum, hippocampus, medulla oblongata plus pons, and cortex. Enhancement of quinone reductase activity was observed in the medulla oblongata plus pons, hippocampus, and cortex. In the medulla oblongata plus pons, elevated glutathione levels were recorded. Following repeated subneurotoxic allyl nitrile exposure (0-400 micromol/kg/day), mice were administered a high-dose allyl nitrile (1.2 mmol/kg) which alone led to appearance of behavioral abnormalities. Compared with the 0 micromol/kg/day group, animals in the 200 and 400 micromol/kg/day pre-treatment groups exhibited decreased behavioral abnormalities and elevated GABA-positive cell counts in the substantia nigra pars reticulata and the interpeduncular nucleus. These data suggest that repeated exposure to subneurotoxic levels of allyl nitrile can induce phase 2 enzymes in the brain, which together with induction in other tissues, may contribute to protection against allyl nitrile neurotoxicity. Copyright 2009 Elsevier Ltd. All rights reserved.

Nitrile hydration by thiolate- and alkoxide-ligated Co-NHase analogues. Isolation of Co(III)-amidate and Co(III)-iminol intermediates.

Science.gov (United States)

Swartz, Rodney D; Coggins, Michael K; Kaminsky, Werner; Kovacs, Julie A

2011-03-23

Nitrile hydratases (NHases) are thiolate-ligated Fe(III)- or Co(III)-containing enzymes, which convert nitriles to the corresponding amide under mild conditions. Proposed NHase mechanisms involve M(III)-NCR, M(III)-OH, M(III)-iminol, and M(III)-amide intermediates. There have been no reported crystallographically characterized examples of these key intermediates. Spectroscopic and kinetic data support the involvement of a M(III)-NCR intermediate. A H-bonding network facilitates this enzymatic reaction. Herein we describe two biomimetic Co(III)-NHase analogues that hydrate MeCN, and four crystallographically characterized NHase intermediate analogues, [Co(III)(S(Me2)N(4)(tren))(MeCN)](2+) (1), [Co(III)(S(Me2)N(4)(tren))(OH)](+) (3), [Co(III)(S(Me2)N(4)(tren))(NHC(O)CH(3))](+) (2), and [Co(III)(O(Me2)N(4)(tren))(NHC(OH)CH(3))](2+) (5). Iminol-bound 5 represents the first example of a Co(III)-iminol compound in any ligand environment. Kinetic parameters (k(1)(298 K) = 2.98(5) M(-1) s(-1), ΔH(‡) = 12.65(3) kcal/mol, ΔS(‡) = -14(7) e.u.) for nitrile hydration by 1 are reported, and the activation energy E(a) = 13.2 kcal/mol is compared with that (E(a) = 5.5 kcal/mol) of the NHase enzyme. A mechanism involving initial exchange of the bound MeCN for OH- is ruled out by the fact that nitrile exchange from 1 (k(ex)(300 K) = 7.3(1) × 10(-3) s(-1)) is 2 orders of magnitude slower than nitrile hydration, and that hydroxide bound 3 does not promote nitrile hydration. Reactivity of an analogue that incorporates an alkoxide as a mimic of the highly conserved NHase serine residue shows that this moiety facilitates nitrile hydration under milder conditions. Hydrogen-bonding to the alkoxide stabilizes a Co(III)-iminol intermediate. Comparison of the thiolate versus alkoxide intermediate structures shows that C≡N bond activation and C═O bond formation proceed further along the reaction coordinate when a thiolate is incorporated into the coordination sphere.

Reactivity of nitriles

International Nuclear Information System (INIS)

Kukushkin, Yu.N.

1987-01-01

Reactivity of coordination nitriles in transition metal (Ru, Mo, W, Zr, Hf) complexes, namely: transformation of nitriles of the first coordination sphere into N-acyl-substituted amides, amidines, nitrile interaction; with water, alkalines, alcoholes, hydrogen, azide and cyanide ions is considered. Introduction of acetonitrile molecule to uranium (4)-carbon double bond is discussed

Nitrile Hydration by Thiolate–and Alkoxide–Ligated Co-NHase Analogues. Isolation of Co(III)-Amidate and Co(III)–Iminol Intermediates

Science.gov (United States)

Swartz, Rodney D.; Coggins, Michael K.; Kaminsky, Werner; Kovacs, Julie A.

2011-01-01

Nitrile hydratases (NHases) are thiolate–ligated Fe(III)- or Co(III)-containing enzymes, which convert nitriles to the corresponding amide under mild conditions. Proposed NHase mechanisms involve M(III)–NCR, M(III)–OH, M(III)–iminol and M(III)–amide intermediates. Spectroscopic and kinetic data support the involvement of a M(III)–NCR intermediate. A H–bonding network facilitates this enzymatic reaction. There have been no reported crystallographically characterized examples of these key intermediates. Herein we describe two biomimetic Co(III)–NHase analogues that hydrate MeCN. Four key crystallographically characterized NHase intermediate anaologues, [CoIII(SMe2N4(tren))(MeCN)]2+ (1), [CoIII(SMe2N4(tren))(OH)]+ (3), [CoIII(SMe2N4(tren))(NHC(O)CH3)]+ (2), and [CoIII(OMe2N4(tren))(NHC(OH)CH3)]2+ (5) are described. Iminol–bound 5 represents the first example of a Co(III)-iminol compound in any ligand environment. Kinetic parameters (k1(298 K)= 2.98(5) M−1s−1, ΔH‡ = 12.65(3) kcal/mol, ΔS‡ = −14(7) e.u.) for nitrile hydration by 1 are reported, and the activation energy Ea= 13.2 kcal/mol is compared with that (Ea= 5.5 kcal/mol) of the NHase enzyme. A mechanism involving initial exchange of the bound MeCN for OH− is ruled out by the fact that nitrile exchange from 1 (kex(300 K)= 7.3(1) x10−3 s−1) is two orders of magnitude slower than nitrile hydration, and that hydroxide bound 3 does not promote nitrile hydration. Reactivity of an analogue that incorporates an alkoxide as a mimic of the highly conserved NHase serine residue shows that this moiety facilitates nitrile hydration under milder conditions. Hydrogen-bonding to the alkoxide stabilizes a Co(III)-iminol intermediate. Comparison of the thiolate versus alkoxide intermediate structures shows that C≡N bond activation and C=O bond formation proceed further along the reaction coordinate when a thiolate is incorporated into the coordination sphere. PMID:21351789

The genetic basis of constitutive and herbivore-induced ESP-independent nitrile formation in Arabidopsis.

Science.gov (United States)

Burow, Meike; Losansky, Anja; Müller, René; Plock, Antje; Kliebenstein, Daniel J; Wittstock, Ute

2009-01-01

Glucosinolates are a group of thioglucosides that are components of an activated chemical defense found in the Brassicales. Plant tissue damage results in hydrolysis of glucosinolates by endogenous thioglucosidases known as myrosinases. Spontaneous rearrangement of the aglucone yields reactive isothiocyanates that are toxic to many organisms. In the presence of specifier proteins, alternative products, namely epithionitriles, simple nitriles, and thiocyanates with different biological activities, are formed at the expense of isothiocyanates. Recently, simple nitriles were recognized to serve distinct functions in plant-insect interactions. Here, we show that simple nitrile formation in Arabidopsis (Arabidopsis thaliana) ecotype Columbia-0 rosette leaves increases in response to herbivory and that this increase is independent of the known epithiospecifier protein (ESP). We combined phylogenetic analysis, a screen of Arabidopsis mutants, recombinant protein characterization, and expression quantitative trait locus mapping to identify a gene encoding a nitrile-specifier protein (NSP) responsible for constitutive and herbivore-induced simple nitrile formation in Columbia-0 rosette leaves. AtNSP1 is one of five Arabidopsis ESP homologues that promote simple nitrile, but not epithionitrile or thiocyanate, formation. Four of these homologues possess one or two lectin-like jacalin domains, which share a common ancestry with the jacalin domains of the putative Arabidopsis myrosinase-binding proteins MBP1 and MBP2. A sixth ESP homologue lacked specifier activity and likely represents the ancestor of the gene family with a different biochemical function. By illuminating the genetic and biochemical bases of simple nitrile formation, our study provides new insights into the evolution of metabolic diversity in a complex plant defense system.

Nitrile rubber and carboxylated nitrile rubber resistance to soybean biodiesel

Directory of Open Access Journals (Sweden)

Felipe Nunes Linhares

2018-03-01

Full Text Available Abstract Biodiesel has been considered a suitable substitute for petroleum diesel, but their chemical composition differs greatly. For this reason, biodiesel interacts differently than petroleum diesel with various materials, including rubbers. Therefore, the resistance of some elastomers should be thoroughly evaluated, specifically those which are commonly used in automotive industry. Nitrile rubber (NBR is widely used to produce vehicular parts that are constantly in contact with fuels. This paper aimed to assess the resistance of carboxylated nitrile rubber (XNBR with 28% of acrylonitrile content to soybean biodiesel in comparison with non-carboxylated nitrile rubber samples, with high and medium acrylonitrile content (33 and 45%. NBR with medium acrylonitrile content showed little resistance to biodiesel. However, carboxylated nitrile rubber even with low acrylonitrile content had similar performance to NBR with high acrylonitrile content.

Iron-Catalyzed Dehydration of Aldoximes to Nitriles Requiring Neither Other Reagents Nor Nitrile Media.

Science.gov (United States)

Hyodo, Kengo; Kitagawa, Saki; Yamazaki, Masayuki; Uchida, Kingo

2016-05-06

The dehydration of aldoximes is an environmentally benign reaction affording the desired nitrile and water as a by-product. However, most of the reported catalytic dehydration reactions of aldoximes require a solvent containing nitrile to synthesize the corresponding nitrile compounds. Inspired by recent reports on the enzymatic synthesis under nitrile-free conditions, we here describe that a simple iron salt catalyzes the dehydration of aldoximes requiring neither other reagents nor nitrile media. Our method can be applied to the one-pot synthesis of nitiriles from aldehydes. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Cytotoxic and genotoxic potential of food-borne nitriles in a liver in vitro model

Science.gov (United States)

Kupke, Franziska; Herz, Corinna; Hanschen, Franziska S.; Platz, Stefanie; Odongo, Grace A.; Helmig, Simone; Bartolomé Rodríguez, María M.; Schreiner, Monika; Rohn, Sascha; Lamy, Evelyn

2016-01-01

Isothiocyanates are the most intensively studied breakdown products of glucosinolates from Brassica plants and well recognized for their pleiotropic effects against cancer but also for their genotoxic potential. However, knowledge about the bioactivity of glucosinolate-borne nitriles in foods is very poor. As determined by GC-MS, broccoli glucosinolates mainly degrade to nitriles as breakdown products. The cytotoxicity of nitriles in human HepG2 cells and primary murine hepatocytes was marginal as compared to isothiocyanates. Toxicity of nitriles was not enhanced in CYP2E1-overexpressing HepG2 cells. In contrast, the genotoxic potential of nitriles was found to be comparable to isothiocyanates. DNA damage was persistent over a certain time period and CYP2E1-overexpression further increased the genotoxic potential of the nitriles. Based on actual in vitro data, no indications are given that food-borne nitriles could be relevant for cancer prevention, but could pose a certain genotoxic risk under conditions relevant for food consumption. PMID:27883018

Cyanide hydratases and cyanide dihydratases: emerging tools in the biodegradation and biodetection of cyanide.

Science.gov (United States)

Martínková, Ludmila; Veselá, Alicja Barbara; Rinágelová, Anna; Chmátal, Martin

2015-11-01

The purpose of this study is to summarize the current knowledge of the enzymes which are involved in the hydrolysis of cyanide, i.e., cyanide hydratases (CHTs; EC 4.2.1.66) and cyanide dihydratases (CynD; EC 3.5.5.1). CHTs are probably exclusively produced by filamentous fungi and widely occur in these organisms; in contrast, CynDs were only found in a few bacterial genera. CHTs differ from CynDs in their reaction products (formamide vs. formic acid and ammonia, respectively). Several CHTs were also found to transform nitriles but with lower relative activities compared to HCN. Mutants of CynDs and CHTs were constructed to study the structure-activity relationships in these enzymes or to improve their catalytic properties. The effect of the C-terminal part of the protein on the enzyme activity was determined by constructing the corresponding deletion mutants. CynDs are less active at alkaline pH than CHTs. To improve its bioremediation potential, CynD from Bacillus pumilus was engineered by directed evolution combined with site-directed mutagenesis, and its operation at pH 10 was thus enabled. Some of the enzymes have been tested for their potential to eliminate cyanide from cyanide-containing wastewaters. CynDs were also used to construct cyanide biosensors.

The aconitate hydratase family from Citrus

Directory of Open Access Journals (Sweden)

Cercos Manuel

2010-10-01

Full Text Available Abstract Background Research on citrus fruit ripening has received considerable attention because of the importance of citrus fruits for the human diet. Organic acids are among the main determinants of taste and organoleptic quality of fruits and hence the control of fruit acidity loss has a strong economical relevance. In citrus, organic acids accumulate in the juice sac cells of developing fruits and are catabolized thereafter during ripening. Aconitase, that transforms citrate to isocitrate, is the first step of citric acid catabolism and a major component of the citrate utilization machinery. In this work, the citrus aconitase gene family was first characterized and a phylogenetic analysis was then carried out in order to understand the evolutionary history of this family in plants. Gene expression analyses of the citrus aconitase family were subsequently performed in several acidic and acidless genotypes to elucidate their involvement in acid homeostasis. Results Analysis of 460,000 citrus ESTs, followed by sequencing of complete cDNA clones, identified in citrus 3 transcription units coding for putatively active aconitate hydratase proteins, named as CcAco1, CcAco2 and CcAco3. A phylogenetic study carried on the Aco family in 14 plant species, shows the presence of 5 Aco subfamilies, and that the ancestor of monocot and dicot species shared at least one Aco gene. Real-time RT-PCR expression analyses of the three aconitase citrus genes were performed in pulp tissues along fruit development in acidic and acidless citrus varieties such as mandarins, oranges and lemons. While CcAco3 expression was always low, CcAco1 and CcAco2 genes were generally induced during the rapid phase of fruit growth along with the maximum in acidity and the beginning of the acid reduction. Two exceptions to this general pattern were found: 1 Clemenules mandarin failed inducing CcAco2 although acid levels were rapidly reduced; and 2 the acidless "Sucreña" orange

The Genetic Basis of Constitutive and Herbivore-Induced ESP-Independent Nitrile Formation in Arabidopsis1[W][OA

Science.gov (United States)

Burow, Meike; Losansky, Anja; Müller, René; Plock, Antje; Kliebenstein, Daniel J.; Wittstock, Ute

2009-01-01

Glucosinolates are a group of thioglucosides that are components of an activated chemical defense found in the Brassicales. Plant tissue damage results in hydrolysis of glucosinolates by endogenous thioglucosidases known as myrosinases. Spontaneous rearrangement of the aglucone yields reactive isothiocyanates that are toxic to many organisms. In the presence of specifier proteins, alternative products, namely epithionitriles, simple nitriles, and thiocyanates with different biological activities, are formed at the expense of isothiocyanates. Recently, simple nitriles were recognized to serve distinct functions in plant-insect interactions. Here, we show that simple nitrile formation in Arabidopsis (Arabidopsis thaliana) ecotype Columbia-0 rosette leaves increases in response to herbivory and that this increase is independent of the known epithiospecifier protein (ESP). We combined phylogenetic analysis, a screen of Arabidopsis mutants, recombinant protein characterization, and expression quantitative trait locus mapping to identify a gene encoding a nitrile-specifier protein (NSP) responsible for constitutive and herbivore-induced simple nitrile formation in Columbia-0 rosette leaves. AtNSP1 is one of five Arabidopsis ESP homologues that promote simple nitrile, but not epithionitrile or thiocyanate, formation. Four of these homologues possess one or two lectin-like jacalin domains, which share a common ancestry with the jacalin domains of the putative Arabidopsis myrosinase-binding proteins MBP1 and MBP2. A sixth ESP homologue lacked specifier activity and likely represents the ancestor of the gene family with a different biochemical function. By illuminating the genetic and biochemical bases of simple nitrile formation, our study provides new insights into the evolution of metabolic diversity in a complex plant defense system. PMID:18987211

Allyl nitrile: Toxicity and health effects.

Science.gov (United States)

Tanii, Hideji

2017-03-28

Allyl nitrile (3-butenenitrile) occurs naturally in the environment, in particular, in cruciferous vegetables, indicating a possible daily intake of the compound. There is no report on actual health effects of allyl nitrile in humans, although it is possible that individuals in the environment are at a risk of exposure to allyl nitrile. However, little is known about its quantitative assessment for the environment and bioactivity in the body. This study provides a review of previous accumulated studies on allyl nitrile. Published literature on allyl nitrile was examined for findings on toxicity, metabolism, risk of various cancers, generation, intake estimates, and low-dose effects in the body. High doses of allyl nitrile produce toxicity characterized by behavioral abnormalities, which are considered to be produced by an active metabolite, 3,4-epoxybutyronitrile. Cruciferous vegetables have been shown to have a potential role in reducing various cancers. Hydrolysis of the glucosinolate sinigrin, rich in cruciferous vegetables, results in the generation of allyl nitrile. An intake of allyl nitrile is estimated at 0.12 μmol/kg body weight in Japan. Repeated exposure to low doses of allyl nitrile upregulates antioxidant/phase II enzymes in various tissues; this may contribute to a reduction in neurotoxicity and skin inflammation. These high and low doses are far more than the intake estimate. Allyl nitrile in the environment is a compound with diverse bioactivities in the body, characterized by inducing behavioral abnormalities at high doses and some antioxidant/phase II enzymes at low doses.

Differing mechanisms of simple nitrile formation on glucosinolate degradation in Lepidium sativum and Nasturtium officinale seeds.

Science.gov (United States)

Williams, David J; Critchley, Christa; Pun, Sharon; Chaliha, Mridusmita; O'Hare, Timothy J

2009-01-01

Glucosinolates are sulphur-containing glycosides found in brassicaceous plants that can be hydrolysed enzymatically by plant myrosinase or non-enzymatically to form primarily isothiocyanates and/or simple nitriles. From a human health perspective, isothiocyanates are quite important because they are major inducers of carcinogen-detoxifying enzymes. Two of the most potent inducers are benzyl isothiocyanate (BITC) present in garden cress (Lepidium sativum), and phenylethyl isothiocyanate (PEITC) present in watercress (Nasturtium officinale). Previous studies on these salad crops have indicated that significant amounts of simple nitriles are produced at the expense of the isothiocyanates. These studies also suggested that nitrile formation may occur by different pathways: (1) under the control of specifier protein in garden cress and (2) by an unspecified, non-enzymatic path in watercress. In an effort to understand more about the mechanisms involved in simple nitrile formation in these species, we analysed their seeds for specifier protein and myrosinase activities, endogenous iron content and glucosinolate degradation products after addition of different iron species, specific chelators and various heat treatments. We confirmed that simple nitrile formation was predominantly under specifier protein control (thiocyanate-forming protein) in garden cress seeds. Limited thermal degradation of the major glucosinolate, glucotropaeolin (benzyl glucosinolate), occurred when seed material was heated to >120 degrees C. In the watercress seeds, however, we show for the first time that gluconasturtiin (phenylethyl glucosinolate) undergoes a non-enzymatic, iron-dependent degradation to a simple nitrile. On heating the seeds to 120 degrees C or greater, thermal degradation of this heat-labile glucosinolate increased simple nitrile levels many fold.

Enzymatic degradation of aliphatic nitriles by Rhodococcus rhodochrous BX2, a versatile nitrile-degrading bacterium.

Science.gov (United States)

Fang, Shumei; An, Xuejiao; Liu, Hongyuan; Cheng, Yi; Hou, Ning; Feng, Lu; Huang, Xinning; Li, Chunyan

2015-06-01

Nitriles are common environmental pollutants, and their removal has attracted increasing attention. Microbial degradation is considered to be the most acceptable method for removal. In this work, we investigated the biodegradation of three aliphatic nitriles (acetonitrile, acrylonitrile and crotononitrile) by Rhodococcus rhodochrous BX2 and the expression of their corresponding metabolic enzymes. This organism can utilize all three aliphatic nitriles as sole carbon and nitrogen sources, resulting in the complete degradation of these compounds. The degradation kinetics were described using a first-order model. The degradation efficiency was ranked according to t1/2 as follows: acetonitrile>trans-crotononitrile>acrylonitrile>cis-crotononitrile. Only ammonia accumulated following the three nitriles degradation, while amides and carboxylic acids were transient and disappeared by the end of the assay. mRNA expression and enzyme activity indicated that the tested aliphatic nitriles were degraded via both the inducible NHase/amidase and the constitutive nitrilase pathways, with the former most likely preferred. Copyright © 2015 Elsevier Ltd. All rights reserved.

Genetics Home Reference: 3-methylglutaconyl-CoA hydratase deficiency

Science.gov (United States)

... provide energy for cells. This amino acid is broken down in cell structures called mitochondria , which convert ... 3-methylglutaconyl-CoA hydratase, leucine is not properly broken down, which leads to a buildup of related ...

Model fire tests on polyphosphazene rubber and polyvinyl chloride (PVC)/nitrile rubber foams

Science.gov (United States)

Widenor, W. M.

1978-01-01

A video tape record of model room fire tests was shown, comparing polyphosphazene (P-N) rubber and polyvinyl chloride (PVC)/nitrile rubber closed-cell foams as interior finish thermal insulation under conditions directly translatable to an actual fire situation. Flashover did not occur with the P-N foam and only moderate amounts of low density smoke were formed, whereas with the PVC/nitrile foam, flashover occurred quickly and large volumes of high density smoke were emitted. The P-N foam was produced in a pilot plant under carefully controlled conditions. The PVC/nitrile foam was a commercial product. A major phase of the overall program involved fire tests on P-N open-cell foam cushioning.

Inverse electron-demand 1,3-dipolar cycloaddition of nitrile oxide with common nitriles leading to 3-functionalized 1,2,4-oxadiazoles.

Science.gov (United States)

Nishiwaki, Nagatoshi; Kobiro, Kazuya; Hirao, Shotaro; Sawayama, Jun; Saigo, Kazuhiko; Ise, Yumiko; Okajima, Yoshikazu; Ariga, Masahiro

2011-10-07

A carbamoyl-substituted nitrile oxide was generated upon treatment of easily available 2-methyl-4-nitro-3-isoxazolin-5(2H)-one with THF (not dried); the reaction proceeded efficiently even in the absence of any special reagents and reaction conditions. The nitrile oxide caused 1,3-dipolar cycloaddition with common aliphatic nitriles or electron-rich aromatic nitriles to afford 3-functionalized 1,2,4-oxadiazoles, which are expected to serve as precursors for the preparation of a variety of functional materials by the chemical transformation of the carbamoyl group. While conventional preparative methods for 1,2,4-oxadiazoles involve the cycloaddition of an electron-rich nitrile oxide with an electron-deficient nitrile or a nitrile activated by a Lewis acid, our method employs the complementary combination of an electron-rich nitrile and an electron-deficient nitrile oxide- the inverse electron-demand 1,3-cycloaddition. The DFT calculations using B3LYP 6-31G* supported the abovementioned inverse reactivity, and also suggested the presence of an accelerating effect by the carbamoyl group as a result of hydrogen bond formation with a dipolarophilic nitrile.

Herbivore-induced poplar cytochrome P450 enzymes of the CYP71 family convert aldoximes to nitriles which repel a generalist caterpillar.

Science.gov (United States)

Irmisch, Sandra; Clavijo McCormick, Andrea; Günther, Jan; Schmidt, Axel; Boeckler, Gerhard Andreas; Gershenzon, Jonathan; Unsicker, Sybille B; Köllner, Tobias G

2014-12-01

Numerous plant species emit volatile nitriles upon herbivory, but the biosynthesis as well as the relevance of these nitrogenous compounds in plant-insect interactions remains unknown. Populus trichocarpa has been shown to produce a complex blend of nitrogenous volatiles, including aldoximes and nitriles, after herbivore attack. The aldoximes were previously reported to be derived from amino acids by the action of cytochrome P450 enzymes of the CYP79 family. Here we show that nitriles are derived from aldoximes by another type of P450 enzyme in P. trichocarpa. First, feeding of deuterium-labeled phenylacetaldoxime to poplar leaves resulted in incorporation of the label into benzyl cyanide, demonstrating that poplar volatile nitriles are derived from aldoximes. Then two P450 enzymes, CYP71B40v3 and CYP71B41v2, were characterized that produce aliphatic and aromatic nitriles from their respective aldoxime precursors. Both possess typical P450 sequence motifs but do not require added NADPH or cytochrome P450 reductase for catalysis. Since both enzymes are expressed after feeding by gypsy moth caterpillars, they are likely to be involved in herbivore-induced volatile nitrile emission in P. trichocarpa. Olfactometer experiments showed that these volatile nitriles have a strong repellent activity against gypsy moth caterpillars, suggesting they play a role in induced direct defense against poplar herbivores. © 2014 The Authors The Plant Journal © 2014 John Wiley & Sons Ltd.

Regiospecific decarboxylative allylation of nitriles

Science.gov (United States)

Recio, Antonio; Tunge, Jon A.

2009-01-01

Palladium-catalyzed decarboxylative α-allylation of nitriles readily occurs using Pd2(dba)3 and rac-BINAP. This catalyst mixture also allows the highly regiospecific α-allylation of nitriles in the presence of much more acidic α-protons. Thus, the reported method provides access to compounds that are not readily available via base-mediated allylation chemistries. Lastly, mechanistic investigations indicate that there is a competition between C- and N-allylation of an intermediate nitrile-stabilized anion and that N-allylation is followed by a rapid [3,3]-sigmatropic rearrangement. PMID:19921827

Purification and characterization of acetylene hydratase of Pelobacter acetylenicus, a tungsten iron-sulfur protein

OpenAIRE

Rosner, Bettina M.; Schink, Bernhard

1995-01-01

Acetylene hydratase of the mesophilic fermenting bacterium Pelobacter acetylenicus catalyzes the hydration of acetylene to acetaldehyde. Growth of P. acetylenicus with acetylene and specific acetylene hydratase activity depended on tungstate or, to a lower degree, molybdate supply in the medium. The specific enzyme activity in cell extract was highest after growth in the presence of tungstate. Enzyme activity was stable even after prolonged storage of the cell extract or of the purified prote...

Interaction of nitriles with electrophilic reagents

International Nuclear Information System (INIS)

Gridnev, I.D.; Gridneva, N.A.

1995-01-01

Reactions of organic nitriles with various electrophiles, Lewis acids (BF 3 , BCl 3 , RuCl 2 , NbCl 5 , ReCl 4 , etc.) in particular, were analysed. Features of nitriles coordination with transition metals (Mo, Ru, Re, Pt, etc.) were considered. It is shown that numerous processes observed in these reactions exhibit rather similar features and are mainly controlled by the nucleophilic properties of a nitrile. REfs, 99, tabs. 8

Simultaneous determination of sulphoraphane and sulphoraphane nitrile in Brassica vegetables using ultra-performance liquid chromatography with tandem mass spectrometry.

Science.gov (United States)

Alvarez-Jubete, Laura; Smyth, Thomas J; Valverde, Juan; Rai, Dilip K; Barry-Ryan, Catherine

2014-01-01

Several analytical methods exist for the determination of sulphoraphane or sulphoraphane nitrile from biological matrices and plant extracts. However, no UPLC-MS/MS method exists for the simultaneous detection of both. To develop and validate an UPLC-MS/MS method for the simultaneous analysis of sulphoraphane and sulphoraphane nitrile from Brassica oleracea L. ssp. italica This method was developed utilising an Acquity BEH C8 column with gradient elution combined with tandem mass spectrometry, using positive electrospray ionisation in multiple reaction monitoring mode. The retention times for sulphoraphane and sulphoraphane nitrile were 0.4 and 0.6 min respectively, and total run time was 3 min. The method was validated for linearity, sensitivity, precision, accuracy, matrix effects and recovery. The method was employed to determine glucoraphanin hydrolysis products in broccoli and the predominant product was found to vary depending on the variety tested. It was also applied to the accurate determination of sulphoraphane and sulphoraphane nitrile in broccoli samples hydrolysed under different conditions. It was observed that the formation of sulphoraphane and sulphoraphane nitrile was influenced by the temperature of the reaction. The validated UPLC-MS/MS method for simultaneous detection of sulphoraphane and sulphoraphane nitrile was shown to be applicable to broccoli plants and is expected to be applicable to other cruciferous sources. Copyright © 2013 John Wiley & Sons, Ltd.

Irradiation of nitrile preforms

International Nuclear Information System (INIS)

Salame, M.; Steingiser, S.

1982-01-01

The process of forming containers from preforms of thermoplastic material comprising at least 20 weight percent of polymerized nitrile group containing monomer is claimed. The preforms are exposed to low dosage electron beam radiation and then, while at molding temperature, distended into containers in a mold. The radiaton causes polymerization of nitrile group containing monomers and the distending causes HCN generated during irradiation to be reduced in the thermoplastic material

Nitrile versus Latex for Glove Juice Sampling.

Directory of Open Access Journals (Sweden)

Timothy F Landers

Full Text Available The objective of this study was to explore the utility of nitrile gloves as a replacement for latex surgical gloves in recovering bacteria from the hands. Two types of nitrile gloves were compared to latex gloves using the parallel streak method. Streaks of Klebsiella pneumoniae and Staphylococcus aureus were made on tryptic soy agar plates, and the zones of inhibition were measured around pieces of glove material placed on the plates. Latex gloves produced a mean zone of inhibition of 0.28 mm, compared to 0.002 mm for nitrile gloves (p<.001. While the parallel streak method is not intended as a quantitative estimate of antimicrobial properties, these results suggest that nitrile may be a viable alternative to latex in glove juice sampling methods, since nitrile avoids the risk of latex exposure.

Structure of fumarate hydratase from Rickettsia prowazekii, the agent of typhus and suspected relative of the mitochondria

International Nuclear Information System (INIS)

Phan, Isabelle; Subramanian, Sandhya; Olsen, Christian; Edwards, Thomas E.; Guo, Wenjin; Zhang, Yang; Van Voorhis, Wesley C.; Stewart, Lance J.; Myler, Peter J.

2011-01-01

Fumarate hydratase is an enzyme of the tricarboxylic acid cycle, one of the metabolic pathways characteristic of the mitochondria. The structure of R. prowazekii class II fumarate hydratase is reported at 2.4 Å resolution and is compared with the available structure of the human homolog. Rickettsiae are obligate intracellular parasites of eukaryotic cells that are the causative agents responsible for spotted fever and typhus. Their small genome (about 800 protein-coding genes) is highly conserved across species and has been postulated as the ancestor of the mitochondria. No genes that are required for glycolysis are found in the Rickettsia prowazekii or mitochondrial genomes, but a complete set of genes encoding components of the tricarboxylic acid cycle and the respiratory-chain complex is found in both. A 2.4 Å resolution crystal structure of R. prowazekii fumarate hydratase, an enzyme catalyzing the third step of the tricarboxylic acid cycle pathway that ultimately converts phosphoenolpyruvate into succinyl-CoA, has been solved. A structure alignment with human mitochondrial fumarate hydratase highlights the close similarity between R. prowazekii and mitochondrial enzymes

The bacterial catabolism of polycyclic aromatic hydrocarbons: Characterization of three hydratase-aldolase-catalyzed reactions

Directory of Open Access Journals (Sweden)

Jake A. LeVieux

2016-12-01

Full Text Available Polycyclic aromatic hydrocarbons (PAHs are highly toxic, pervasive environmental pollutants with mutagenic, teratogenic, and carcinogenic properties. There is interest in exploiting the nutritional capabilities of microbes to remove PAHs from various environments including those impacted by improper disposal or spills. Although there is a considerable body of literature on PAH degradation, the substrates and products for many of the enzymes have never been identified and many proposed activities have never been confirmed. This is particularly true for high molecular weight PAHs (e.g., phenanthrene, fluoranthene, and pyrene. As a result, pathways for the degradation of these compounds are proposed to follow one elucidated for naphthalene with limited experimental verification. In this pathway, ring fission produces a species that can undergo a non-enzymatic cyclization reaction. An isomerase opens the ring and catalyzes a cis to trans double bond isomerization. The resulting product is the substrate for a hydratase-aldolase, which catalyzes the addition of water to the double bond of an α,β-unsaturated ketone, followed by a retro-aldol cleavage. Initial kinetic and mechanistic studies of the hydratase-aldolase in the naphthalene pathway (designated NahE and two hydratase-aldolases in the phenanthrene pathway (PhdG and PhdJ have been completed. Crystallographic work on two of the enzymes (NahE and PhdJ provides a rudimentary picture of the mechanism and a platform for future work to identify the structural basis for catalysis and the individual specificities of these hydratase-aldolases.

40 CFR 721.5350 - Substituted nitrile (generic name).

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Substituted nitrile (generic name... Substances § 721.5350 Substituted nitrile (generic name). (a) Chemical substances and significant new uses subject to reporting. (1) The chemical substance identified generically as a substituted nitrile (PMN P-83...

40 CFR 721.555 - Alkyl amino nitriles (generic).

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Alkyl amino nitriles (generic). 721... Substances § 721.555 Alkyl amino nitriles (generic). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substances identified generically as alkyl amino nitriles (PMNs P-96...

Characterization of linoleate 10-hydratase of Lactobacillus plantarum and novel antifungal metabolites

Directory of Open Access Journals (Sweden)

Yuan Yao Chen

2016-10-01

Full Text Available Lactobacilli convert linoleic acid to the antifungal compound 10-hydroxy-12-octadecenoic acid (10-HOE by linoleate 10-hydratase (10-LAH. However, the effect of this conversion on cellularmembrane physiology and properties of the cell surface have not been demonstrated. Moreover, L. plantarum produces 13-hydroxy-9-octadecenoic acid (13-HOE in addition to 10-HOE, but the antifungal activity of 13-HOE was unknown. Phylogenetic analyses conducted in this study did not differentiate between 10-LAH and linoleate 13-hydratase (13-LAH. Thus, linoleate hydratases (LAHs must be characterized through their differences in their activities of linoleate conversion. Four genes encoding putative LAHs from lactobacilli were cloned, heterologous expressed, purified and identified as FAD-dependent 10-LAH. The unsaturated fatty acid substrates stimulated the growth of lactobacilli. We also investigated the role of 10-LAH in ethanol tolerance, membrane fluidity and hydrophobicity of cell surfaces in lactobacilli by disruption of 10-lah. Compared with the L. plantarum 10-lah deficient strain, 10-LAH in wild-type strain did not exert effect on cell survival and membrane fluidity under ethanol stress, but influenced the cell surface hydrophobicity. Moreover, deletion of 10-LAH in L. plantarum facilitated purification of 13-HOE and demonstration of its antifungal activity against Penicillium roquefortii and Aspergillus niger.

Nitrile-assisted oxidation over oxidative-annulation: Pd-catalyzed α,β-dehydrogenation of α-cinnamyl β-keto nitriles.

Science.gov (United States)

Nallagonda, Rajender; Reddy, Reddy Rajasekhar; Ghorai, Prasanta

2017-09-13

A palladium-catalyzed oxidation reaction is disclosed where the nitrile functionality on the substrate simply changes the course of the reaction. Our previous finding showed that using the Pd(ii)-catalyst in the presence of benzoquinone as an oxidant, 2-cinnamyl-1,3-dicarbonyls provides functionalized furans via oxidative cyclization. When a nitrile group is replaced with one of the carbonyl functionalities of the same substrate, the oxidative cyclization was completely suppressed; instead, the oxidation at the α,β-position occurred to provide α,β,γ,δ-diene containing β-keto nitriles.

Nitrile versus Latex for Glove Juice Sampling.

Science.gov (United States)

Landers, Timothy F; Dent, Anthony

2014-01-01

The objective of this study was to explore the utility of nitrile gloves as a replacement for latex surgical gloves in recovering bacteria from the hands. Two types of nitrile gloves were compared to latex gloves using the parallel streak method. Streaks of Klebsiella pneumoniae and Staphylococcus aureus were made on tryptic soy agar plates, and the zones of inhibition were measured around pieces of glove material placed on the plates. Latex gloves produced a mean zone of inhibition of 0.28 mm, compared to 0.002 mm for nitrile gloves (pnitrile may be a viable alternative to latex in glove juice sampling methods, since nitrile avoids the risk of latex exposure.

Antimalarial Activity of Azadipeptide Nitriles

OpenAIRE

Löser, Reik; Gut, Jiri; Rosenthal, Philip J.; Frizler, Maxim; Gütschow, Michael; Andrews, Katherine T.

2009-01-01

Azadipeptide nitriles – novel cysteine protease inhibitors – display structure-dependent antimalarial activity against both chloroquine-sensitive and chloroquine-resistant lines of cultured Plasmodium falciparum malaria parasites. Inhibition of parasite’s haemoglobin-degrading cysteine proteases was also investigated, revealing the azadipeptide nitriles as potent inhibitors of falcipain-2 and -3. A correlation between the cysteine protease-inhibiting activity and the antimalarial potential of...

NSP-Dependent Simple Nitrile Formation Dominates upon Breakdown of Major Aliphatic Glucosinolates in Roots, Seeds, and Seedlings of Arabidopsis thaliana Columbia-0.

Science.gov (United States)

Wittstock, Ute; Meier, Kathrin; Dörr, Friederike; Ravindran, Beena M

2016-01-01

One of the best-studied plant defense systems, the glucosinolate-myrosinase system of the Brassicales, is composed of thioglucosides known as glucosinolates and their hydrolytic enzymes, the myrosinases. Tissue disruption brings these components together, and bioactive products are formed as a consequence of myrosinase-catalyzed glucosinolate hydrolysis. Among these products, isothiocyanates have attracted most interest as chemical plant defenses against herbivores and pathogens and health-promoting compounds in the human diet. Previous research has identified specifier proteins whose presence results in the formation of alternative product types, e.g., nitriles, at the expense of isothiocyanates. The biological roles of specifier proteins and alternative breakdown products are poorly understood. Here, we assessed glucosinolate breakdown product profiles obtained upon maceration of roots, seedlings and seeds of Arabidopsis thaliana Columbia-0. We identified simple nitriles as the predominant breakdown products of the major endogenous aliphatic glucosinolates in root, seed, and seedling homogenates. In agreement with this finding, genes encoding nitrile-specifier proteins (NSPs) are expressed in roots, seeds, and seedlings. Analysis of glucosinolate breakdown in mutants with T-DNA insertions in any of the five NSP genes demonstrated, that simple nitrile formation upon tissue disruption depended almost entirely on NSP2 in seeds and mainly on NSP1 in seedlings. In roots, about 70-80% of the nitrile-forming activity was due to NSP1 and NSP3 . Thus, glucosinolate breakdown product profiles are organ-specifically regulated in A. thaliana Col-0, and high proportions of simple nitriles are formed in some parts of the plant. This should be considered in future studies on biological roles of the glucosinolate-myrosinase system.

NSP-dependent simple nitrile formation dominates upon breakdown of major aliphatic glucosinolates in roots, seeds, and seedlings of Arabidopsis thaliana Columbia-0

Directory of Open Access Journals (Sweden)

Ute Wittstock

2016-12-01

Full Text Available One of the best-studied plant defense systems, the glucosinolate-myrosinase system of the Brassicales, is composed of thioglucosides known as glucosinolates and their hydrolytic enzymes, the myrosinases. Tissue disruption brings these components together, and bioactive products are formed as a consequence of myrosinase-catalyzed glucosinolate hydrolysis. Among these products, isothiocyanates have attracted most interest as chemical plant defenses against herbivores and pathogens and health-promoting compounds in the human diet. Previous research has identified specifier proteins whose presence results in the formation of alternative product types, e.g. nitriles, at the expense of isothiocyanates. The biological roles of specifier proteins and alternative breakdown products are poorly understood. Here, we assessed glucosinolate breakdown product profiles obtained upon maceration of roots, seedlings and seeds of Arabidopsis thaliana Columbia-0. We identified simple nitriles as the predominant breakdown products of the major endogenous aliphatic glucosinolates in root, seed, and seedling homogenates. In agreement with this finding, genes encoding nitrile-specifier proteins (NSPs are expressed in roots, seeds, and seedlings. Analysis of glucosinolate breakdown in mutants with T-DNA insertions in any of the five NSP genes demonstrated, that simple nitrile formation upon tissue disruption depended almost entirely on NSP2 in seeds and mainly on NSP1 in seedlings. In roots, about 70-80 % of the nitrile-forming activity was due to NSP1 and NSP3. Thus, glucosinolate breakdown product profiles are organ-specifically regulated in A. thaliana Col 0, and high proportions of simple nitriles are formed in some parts of the plant. This should be considered in future studies on biological roles of the glucosinolate-myrosinase system.

Structure reveals regulatory mechanisms of a MaoC-like hydratase from Phytophthora capsici involved in biosynthesis of polyhydroxyalkanoates (PHAs).

Science.gov (United States)

Wang, Huizheng; Zhang, Kai; Zhu, Jie; Song, Weiwei; Zhao, Li; Zhang, Xiuguo

2013-01-01

Polyhydroxyalkanoates (PHAs) have attracted increasing attention as "green plastic" due to their biodegradable, biocompatible, thermoplastic, and mechanical properties, and considerable research has been undertaken to develop low cost/high efficiency processes for the production of PHAs. MaoC-like hydratase (MaoC), which belongs to (R)-hydratase involved in linking the β-oxidation and the PHA biosynthetic pathways, has been identified recently. Understanding the regulatory mechanisms of (R)-hydratase catalysis is critical for efficient production of PHAs that promise synthesis an environment-friendly plastic. We have determined the crystal structure of a new MaoC recognized from Phytophthora capsici. The crystal structure of the enzyme was solved at 2.00 Å resolution. The structure shows that MaoC has a canonical (R)-hydratase fold with an N-domain and a C-domain. Supporting its dimerization observed in structure, MaoC forms a stable homodimer in solution. Mutations that disrupt the dimeric MaoC result in a complete loss of activity toward crotonyl-CoA, indicating that dimerization is required for the enzymatic activity of MaoC. Importantly, structure comparison reveals that a loop unique to MaoC interacts with an α-helix that harbors the catalytic residues of MaoC. Deletion of the loop enhances the enzymatic activity of MaoC, suggesting its inhibitory role in regulating the activity of MaoC. The data in our study reveal the regulatory mechanism of an (R)-hydratase, providing information on enzyme engineering to produce low cost PHAs.

C- and N-Metalated Nitriles: The Relationship between Structure and Selectivity.

Science.gov (United States)

Yang, Xun; Fleming, Fraser F

2017-10-17

Metalated nitriles are exceptional nucleophiles capable of forging highly hindered stereocenters in cases where enolates are unreactive. The excellent nucleophilicity emanates from the powerful inductive stabilization of adjacent negative charge by the nitrile, which has a miniscule steric demand. Inductive stabilization is the key to understanding the reactivity of metalated nitriles because this permits a continuum of structures that range from N-metalated ketenimines to nitrile anions. Solution and solid-state analyses reveal two different metal coordination sites, the formally anionic carbon and the nitrile nitrogen, with the site of metalation depending intimately on the solvent, counterion, temperature, and ligands. The most commonly encountered structures, C- and N-metalated nitriles, have either sp 3 or sp 2 hybridization at the nucleophilic carbon, which essentially translates into two distinct organometallic species with similar but nonidentical stereoselectivity, regioselectivity, and reactivity preferences. The hybridization differences are particularly important in S N i displacements of cyclic nitriles because the orbital orientations create very precise trajectories that control the cyclization selectivity. Harnessing the orbital differences between C- and N-metalated nitriles allows selective cyclization to afford nitrile-containing cis- or trans-hydrindanes, decalins, or bicyclo[5.4.0]undecanes. Similar orbital constraints favor preferential S N i displacements with allylic electrophiles on sp 3 centers over sp 2 centers. The strategy permits stereoselective displacements on secondary centers to set contiguous tertiary and quaternary stereocenters or even contiguous vicinal quaternary centers. Stereoselective alkylations of acyclic nitriles are inherently more challenging because of the difficulty in creating steric differentiation in a dynamic system with rotatable bonds. However, judicious substituent placement of vicinal dimethyl groups and a

Nicotinic acid bio-production by Microbacterium imperiale CBS 489-74. Effect of 3-cyanopyridine and temperature on amidase activity

Czech Academy of Sciences Publication Activity Database

Cantarella, M.; Cantarella, L.; Gallifuoco, A.; Spera, A.; Martínková, Ludmila

2012-01-01

Roč. 47, č. 7 (2012), s. 1192-1196 ISSN 1359-5113 R&D Projects: GA MŠk OC09046 Keywords : Nitrile hydratase-amidase cascade system * 3-Cyanopyridine inactivation * 3-Cyanopyridine inhibition Subject RIV: CE - Biochemistry Impact factor: 2.414, year: 2012

Copper-Mediated Reactions of Nitriles with Nitromethanes: Aza-Henry Reactions and Nitrile Hydrations.

Science.gov (United States)

Kuwabara, Jun; Sawada, Yoshiharu; Yoshimatsu, Mitsuhiro

2018-02-16

In this study, the first aza-Henry reaction of nitriles with nitromethane in a CuI/Cs 2 CO 3 /DBU system is described. The process was conveniently and directly used for the synthesis of β-aminonitroalkenes 2a-x and tolerated aryl-, alkyl-, hetaryl-, alkenyl-, and alkynylnitriles. The resulting aminonitroalkenes 2 could be successfully transformed to the corresponding 2-nitroacetophenones, 2-amino-1-halonitroalkenes, 2-alkylaminonitroalkenes, or 3-nitropyridines. In the presence of H 2 O, the aza-Henry reaction turned the reaction path to the nitrile hydration to exclusively yield the amides 3a-s.

Structure reveals regulatory mechanisms of a MaoC-like hydratase from Phytophthora capsici involved in biosynthesis of polyhydroxyalkanoates (PHAs.

Directory of Open Access Journals (Sweden)

Huizheng Wang

Full Text Available Polyhydroxyalkanoates (PHAs have attracted increasing attention as "green plastic" due to their biodegradable, biocompatible, thermoplastic, and mechanical properties, and considerable research has been undertaken to develop low cost/high efficiency processes for the production of PHAs. MaoC-like hydratase (MaoC, which belongs to (R-hydratase involved in linking the β-oxidation and the PHA biosynthetic pathways, has been identified recently. Understanding the regulatory mechanisms of (R-hydratase catalysis is critical for efficient production of PHAs that promise synthesis an environment-friendly plastic.We have determined the crystal structure of a new MaoC recognized from Phytophthora capsici. The crystal structure of the enzyme was solved at 2.00 Å resolution. The structure shows that MaoC has a canonical (R-hydratase fold with an N-domain and a C-domain. Supporting its dimerization observed in structure, MaoC forms a stable homodimer in solution. Mutations that disrupt the dimeric MaoC result in a complete loss of activity toward crotonyl-CoA, indicating that dimerization is required for the enzymatic activity of MaoC. Importantly, structure comparison reveals that a loop unique to MaoC interacts with an α-helix that harbors the catalytic residues of MaoC. Deletion of the loop enhances the enzymatic activity of MaoC, suggesting its inhibitory role in regulating the activity of MaoC.The data in our study reveal the regulatory mechanism of an (R-hydratase, providing information on enzyme engineering to produce low cost PHAs.

Borrelidin B: isolation, biological activity, and implications for nitrile biosynthesis.

Science.gov (United States)

Schulze, Christopher J; Bray, Walter M; Loganzo, Frank; Lam, My-Hanh; Szal, Teresa; Villalobos, Anabella; Koehn, Frank E; Linington, Roger G

2014-11-26

Borrelidin (1) is a nitrile-containing bacterially derived polyketide that is a potent inhibitor of bacterial and eukaryotic threonyl-tRNA synthetases. We now report the discovery of borrelidin B (2), a tetrahydro-borrelidin derivative containing an aminomethyl group in place of the nitrile functionality in borrelidin. The discovery of this new metabolite has implications for both the biosynthesis of the nitrile group and the bioactivity of the borrelidin compound class. Screening in the SToPS assay for tRNA synthetase inhibition revealed that the nitrile moiety is essential for activity, while profiling using our in-house image-based cytological profiling assay demonstrated that 2 retains biological activity by causing a mitotic stall, even in the absence of the nitrile motif.

Electron beam modification and crosslinking: Influence of nitrile and carboxyl contents and level of unsaturation on structure and properties of nitrile rubber

International Nuclear Information System (INIS)

Vijayabaskar, V.; Tikku, V.K.; Bhowmick, Anil K.

2006-01-01

The structural changes of nitrile rubber with varying nitrile contents, hydrogenated nitrile rubber and carboxylated nitrile rubber in the presence and absence of a polyfunctional monomer, namely trimethylolpropane triacrylate, at different doses of electron beam irradiation, were investigated with the help of FTIR spectroscopy (in the attenuated total reflectance mode), dynamic mechanical thermal analysis and sol-gel analysis. Solid-state NMR with gated high power decoupling technique was used to understand the mechanism of crosslinking of the irradiated samples. The allylic radicals generated in the butadiene chains react to form intermolecular crosslinkages. There was a significant decrease in the concentration of olefinic groups for the nitrile rubber on irradiation. This was also affirmed by the increase in the carbon resonances due to C-C linkages from the NMR technique, indicating more crosslinkages. The spectroscopic crosslink densities were determined and the results were compared with the swelling measurements. The variation in the crosslink clustering for rubbers with different acrylonitrile contents was explained using the NMR technique. The increase in crosslinking was also revealed by the increase in the percent gel content and dynamic storage moduli with radiation doses. The lifetime of spurs formed and the critical dose, an important criterion for overlapping of spurs, were determined for both the grafted and the ungrafted nitrile rubbers of different grades and compared using a mathematical model. The ratio of scissioning to crosslinking for nitrile rubber was determined using Charlesby-Pinner equation. The mechanical properties had also been studied for both the modified and the unmodified systems

Unveiling of novel regio-selective fatty acid double bond hydratases from Lactobacillus acidophilus involved in the selective oxyfunctionalization of mono- and di-hydroxy fatty acids.

Science.gov (United States)

Kim, Kyoung-Rok; Oh, Hye-Jin; Park, Chul-Soon; Hong, Seung-Hye; Park, Ji-Young; Oh, Deok-Kun

2015-11-01

The aim of this study is the first time demonstration of cis-12 regio-selective linoleate double-bond hydratase. Hydroxylation of fatty acids, abundant feedstock in nature, is an emerging alternative route for many petroleum replaceable products thorough hydroxy fatty acids, carboxylic acids, and lactones. However, chemical route for selective hydroxylation is still quite challenging owing to low selectivity and many environmental concerns. Hydroxylation of fatty acids by hydroxy fatty acid forming enzymes is an important route for selective biocatalytic oxyfunctionalization of fatty acids. Therefore, novel fatty acid hydroxylation enzymes should be discovered. The two hydratase genes of Lactobacillus acidophilus were identified by genomic analysis, and the expressed two recombinant hydratases were identified as cis-9 and cis-12 double-bond selective linoleate hydratases by in vitro functional validation, including the identification of products and the determination of regio-selectivity, substrate specificity, and kinetic parameters. The two different linoleate hydratases were the involved enzymes in the 10,13-dihydroxyoctadecanoic acid biosynthesis. Linoleate 13-hydratase (LHT-13) selectively converted 10 mM linoleic acid to 13S-hydroxy-9(Z)-octadecenoic acid with high titer (8.1 mM) and yield (81%). Our study will expand knowledge for microbial fatty acid-hydroxylation enzymes and facilitate the designed production of the regio-selective hydroxy fatty acids for useful chemicals from polyunsaturated fatty acid feedstocks. © 2015 Wiley Periodicals, Inc.

Characterization of recombinant nitrile-specifier proteins (NSPs) of Arabidopsis thaliana: dependency on Fe(II) ions and the effect of glucosinolate substrate and reaction conditions.

Science.gov (United States)

Kong, Xiang Yi; Kissen, Ralph; Bones, Atle M

2012-12-01

Glucosinolates are plant secondary metabolites that are part of a plant defence system against pathogens and pests, the myrosinase-glucosinolate system, in which glucosinolates get activated by enzymic degradation through thioglucoside glucohydrolases called myrosinases. Epithiospecifier protein (ESP) and nitrile-specifier proteins (NSPs) divert myrosinase-catalyzed hydrolysis of a given glucosinolate from the formation of isothiocyanate to that of epithionitrile and/or nitrile. As the biological activity of glucosinolate hydrolysis products varies considerably, a detailed characterization of these specifier proteins is of utmost importance to understand their biological role. Therefore, the Arabidopsis thaliana AtNSP1, AtNSP2 and AtNSP5 and a supposed ancestor protein AtNSP-like1 were expressed in Escherichia coli and the activity of the purified recombinant proteins was tested in vitro on three highly different glucosinolates and compared to that of purified AtESP. As previously reported, only AtESP showed epithiospecifier activity on 2-propenylglucosinolate. We further confirmed that purified AtNSP1, AtNSP2 and AtNSP5, but not the ancestor AtNSP-like1 protein, show nitrile-specifier activity on 2-propenylglucosinolate and benzylglucosinolate. We now show for the first time that in vitro AtNSP1, AtNSP2 and AtNSP5 are able to generate nitrile from indol-3-ylmethylglucosinolate. We also tested the effect of different Fe(II) ion concentrations on the nitrile-specifier activity of purified AtNSP1, AtNSP2 and AtNSP5 on 2-propenylglucosinolate and benzylglucosinolate. AtNSP-related nitrile production was highly dependent on the presence of Fe(II) ions in the reaction assay. In the absence of added Fe(II) ions nitriles were only detected when benzylglucosinolate was incubated with AtNSP1. While AtNSP1 also exhibited overall higher nitrile-specifier activity than AtNSP2 and AtNSP5 at a given Fe(II) ion concentration, the pattern of nitrile formation in relation to Fe

Nitrile-converting enzymes: an eco-friendly tool for industrial biocatalysis.

Science.gov (United States)

Ramteke, Pramod W; Maurice, Navodita G; Joseph, Babu; Wadher, Bharat J

2013-01-01

Nitriles are organic compounds bearing a − C ≡ N group; they are frequently known to occur naturally in both fauna and flora and are also synthesized chemically. They have wide applicability in the fields of medicine, industry, and environmental monitoring. However, the majority of nitrile compounds are considered to be lethal, mutagenic, and carcinogenic in nature and are known to cause potential health problems such as nausea, bronchial irritation, respiratory distress, convulsions, coma, and skeletal deformities in humans. Nitrile-converting enzymes, which are extracted from microorganisms, are commonly termed nitrilases and have drawn the attention of researchers all over the world to combat the toxicity of nitrile compounds. The present review focuses on the utility of nitrile-converting enzymes, sources, classification, structure, properties, and applications, as well as the future perspective on nitrilases. © 2013 International Union of Biochemistry and Molecular Biology, Inc.

"Nanorust"-catalyzed benign oxidation of amines for selective synthesis of nitriles.

Science.gov (United States)

Jagadeesh, Rajenahally V; Junge, Henrik; Beller, Matthias

2015-01-01

Organic nitriles constitute key precursors and central intermediates in organic synthesis. In addition, nitriles represent a versatile motif found in numerous medicinally and biologically important compounds. Generally, these nitriles are synthesized by traditional cyanation procedures using toxic cyanides. Herein, we report the selective and environmentally benign oxidative conversion of primary amines for the synthesis of structurally diverse aromatic, aliphatic and heterocyclic nitriles using a reusable "nanorust" (nanoscale Fe2 O3 )-based catalysts applying molecular oxygen. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Hydrolysis of nitriles by soil bacteria: variation with soil origin.

Science.gov (United States)

Rapheeha, O K L; Roux-van der Merwe, M P; Badenhorst, J; Chhiba, V; Bode, M L; Mathiba, K; Brady, D

2017-03-01

The aim of this study was to explore bacterial soil diversity for nitrile biocatalysts, in particular, those for hydrolysis of β-substituted nitriles, to the corresponding carboxamides and acids that may be incorporated into peptidomimetics. To achieve this, we needed to compare the efficiency of isolation methods and determine the influence of land use and geographical origin of the soil sample. Nitrile-utilizing bacteria were isolated from various soil environments across a 1000 km long transect of South Africa, including agricultural soil, a gold mine tailing dam and uncultivated soil. The substrate profile of these isolates was determined through element-limited growth studies on seven different aliphatic or aromatic nitriles. A subset of these organisms expressing broad substrate ranges was evaluated for their ability to hydrolyse β-substituted nitriles (3-amino-3-phenylpropionitrile and 3-hydroxy-4-phenoxybutyronitrile) and the active organisms were found to be Rhodococcus erythropolis from uncultivated soil and Rhodococcus rhodochrous from agricultural soils. The capacity for hydrolysis of β-substituted nitriles appears to reside almost exclusively in Rhodococci. Land use has a much greater effect on the biocatalysis substrate profile than geographical location. Enzymes are typically substrate specific in their catalytic reactions, and this means that a wide diversity of enzymes is required to provide a comprehensive biocatalysis toolbox. This paper shows that the microbial diversity of nitrile hydrolysis activity can be targeted according to land utilization. Nitrile biocatalysis is a green chemical method for the enzymatic production of amides and carboxylic acids that has industrial applications, such as in the synthesis of acrylamide and nicotinamide. The biocatalysts discovered in this study may be applied to the synthesis of peptidomimetics which are an important class of therapeutic compounds. © 2016 The Society for Applied Microbiology.

Evaluation of genotoxicity of nitrile fragrance ingredients using in vitro and in vivo assays.

Science.gov (United States)

Bhatia, S P; Politano, V T; Api, A M

2013-09-01

Genotoxicity studies were conducted on a group of 8 fragrance ingredients that belong to the nitrile family. These nitriles are widely used in consumer products however there is very limited data in the literature regarding the genotoxicity of these nitriles. The 8 nitriles were assessed for genotoxicity using an Ames test, in vitro chromosome aberration test or in vitro micronucleus test. The positive results observed in the in vitro tests were further investigated using an in vivo micronucleus test. The results from these different tests were compared and these 8 nitriles are not considered to be genotoxic. Dodecanitrile and 2,2,3-trimethylcyclopent-3-enylacetonitrile were negative in the in vitro chromosome aberration test and in vitro micronucleus test, respectively. While citronellyl nitrile, 3-methyl-5-phenylpentanenitrile, cinnamyl nitrile, and 3-methyl-5-phenylpent-2-enenitrile revealed positive results in the in vitro tests, but confirmatory in vivo tests determined these nitriles to be negative in the in vivo micronucleus assay. The remaining two nitriles (benzonitrile and α-cyclohexylidene benzeneacetonitrile) were negative in the in vivo micronucleus test. This study aims to evaluate the genotoxicity potential of these nitriles as well as enrich the literature with genotoxicity data on fragrance ingredients. Copyright © 2013 Elsevier Ltd. All rights reserved.

Addition of HO-nucleophiles to free and coordinated nitriles

International Nuclear Information System (INIS)

Bokach, Nadejda A; Kukushkin, Vadim Yu

2005-01-01

The review surveys data on the addition of HO-nucleophiles (water, oximes, hydroxylamines, hydroxamic acids, alcohols) to nitriles. Main methods for C≡N bond activation in nucleophilic addition reactions are discussed. Particular attention is given to activation of nitriles through coordination to metal centres.

Substrate and cofactor binding to nitrile reductase : A mass spectrometry based study

NARCIS (Netherlands)

Gjonaj, L.; Pinkse, M.W.H.; Fernandez Fueyo, E.; Hollmann, F.; Hanefeld, U.

2016-01-01

Nitrile reductases catalyse a two-step reduction of nitriles to amines. This requires the binding of two NADPH molecules during one catalytic cycle. For the nitrile reductase from E. coli (EcoNR) mass spectrometry studies of the catalytic mechanism were performed. EcoNR is dimeric and has no Rossman

Mechanistic study on exchange between labeled cyanide and nitriles

International Nuclear Information System (INIS)

Hussain, Munir; Chaney, J.E.; Digenis, G.A.; Layton, W.J.

1985-01-01

The potential of a clean, rapid exchange between the nitrile function of mandelonitrile and cyanide was examined for the preparation of labeled mandelonitrile which could be subsequently rapidly reduced with borane to labeled phenylethanolamine (PEOH). The mandelonitrile exchange (CN-CN) was studied using [ 13 C]-NaCN with crown ethers in THF, monitoring the results with 13 C-NMR. A large increase in the intensity of the signal due to [ 13 C]-nitrile was observed. The exchange was also carried out using [ 14 C]-NaCN, and the exchanged nitrile was reduced to [ 14 C]-PEOH. The chemical yield for the reduction of [ 14 C]-mandelonitrile to [ 14 C]-PEOH was 60% and the overall radio-chemical yield of the cyanide-exchange and borane reduction (based on [ 14 C]-NaCN used) was 20%. Mechanisms are proposed which were found to be consistent with results of cyanide exchange of appropriately selected nitriles. (author)

Selective Incorporation of Nitrile-Based Infrared Probes into Proteins via Cysteine Alkylation

OpenAIRE

Jo, Hyunil; Culik, Robert M.; Korendovych, Ivan V.; DeGrado, William F.; Gai, Feng

2010-01-01

The nitrile stretching vibration is increasingly used as a sensitive infrared probe of local protein environments. However, site-specific incorporation of a nitrile moiety into proteins is difficult. Here we show that various aromatic nitriles can be easily incorporated into peptides and proteins via either thiol alkylation or arylation reaction.

Manganese Catalyzed α-Olefination of Nitriles by Primary Alcohols.

Science.gov (United States)

Chakraborty, Subrata; Das, Uttam Kumar; Ben-David, Yehoshoa; Milstein, David

2017-08-30

Catalytic α-olefination of nitriles using primary alcohols, via dehydrogenative coupling of alcohols with nitriles, is presented. The reaction is catalyzed by a pincer complex of an earth-abundant metal (manganese), in the absence of any additives, base, or hydrogen acceptor, liberating dihydrogen and water as the only byproducts.

Selective Incorporation of Nitrile-Based Infrared Probes into Proteins via Cysteine Alkylation

Science.gov (United States)

Jo, Hyunil; Culik, Robert M.; Korendovych, Ivan V.; DeGrado, William F.; Gai, Feng

2010-01-01

The nitrile stretching vibration is increasingly used as a sensitive infrared probe of local protein environments. However, site-specific incorporation of a nitrile moiety into proteins is difficult. Here we show that various aromatic nitriles can be easily incorporated into peptides and proteins via either thiol alkylation or arylation reaction. PMID:21077670

Field ion emission from tungsten wires covered with organic micro needles of benzyl nitrile

International Nuclear Information System (INIS)

Helal, A.I.; Zahran, N.F.

1986-01-01

Benzyl nitrile micro needles are grown on the surface of a 10 um tungsten wire. The activated wires are used as field anodes in field ionization source. The activation time using benzyl nitrile as an activator is much shorter than the corresponding time required for benzo nitrile activation. Field ionization mass spectra of benzo- and benzyl-nitriles are measured by the new emitters

Nitrilase enzymes and their role in plant-microbe interactions.

Science.gov (United States)

Howden, Andrew J M; Preston, Gail M

2009-07-01

Nitrilase enzymes (nitrilases) catalyse the hydrolysis of nitrile compounds to the corresponding carboxylic acid and ammonia, and have a wide range of industrial and biotechnological applications, including the synthesis of industrially important carboxylic acids and bioremediation of cyanide and toxic nitriles. Nitrilases are produced by a wide range of organisms, including plants, bacteria and fungi, but despite their biotechnological importance, the role of these enzymes in living organisms is relatively underexplored. Current research suggests that nitrilases play important roles in a range of biological processes. In the context of plant-microbe interactions they may have roles in hormone synthesis, nutrient assimilation and detoxification of exogenous and endogenous nitriles. Nitrilases are produced by both plant pathogenic and plant growth-promoting microorganisms, and their activities may have a significant impact on the outcome of plant-microbe interactions. In this paper we review current knowledge of the role of nitriles and nitrilases in plants and plant-associated microorganisms, and discuss how greater understanding of the natural functions of nitrilases could be applied to benefit both industry and agriculture. © 2009 The Authors. Journal compilation © 2009 Society for Applied Microbiology and Blackwell Publishing Ltd.

Nitrile rubber and carboxylated nitrile rubber resistance to soybean biodiesel

OpenAIRE

Felipe Nunes Linhares; Cléverson Fernandes Senra Gabriel; Ana Maria Furtado de Sousa; Marcia Christina Amorim Moreira Leite; Cristina Russi Guimarães Furtado

2018-01-01

Abstract Biodiesel has been considered a suitable substitute for petroleum diesel, but their chemical composition differs greatly. For this reason, biodiesel interacts differently than petroleum diesel with various materials, including rubbers. Therefore, the resistance of some elastomers should be thoroughly evaluated, specifically those which are commonly used in automotive industry. Nitrile rubber (NBR) is widely used to produce vehicular parts that are constantly in contact with fuels. T...

Lactic acid bacteria convert glucosinolates to nitriles efficiently yet differently from enterobacteriaceae.

Science.gov (United States)

Mullaney, Jane A; Kelly, William J; McGhie, Tony K; Ansell, Juliet; Heyes, Julian A

2013-03-27

Glucosinolates from the genus Brassica can be converted into bioactive compounds known to induce phase II enzymes, which may decrease the risk of cancers. Conversion via hydrolysis is usually by the brassica enzyme myrosinase, which can be inactivated by cooking or storage. We examined the potential of three beneficial bacteria, Lactobacillus plantarum KW30, Lactococcus lactis subsp. lactis KF147, and Escherichia coli Nissle 1917, and known myrosinase-producer Enterobacter cloacae to catalyze the conversion of glucosinolates in broccoli extract. Enterobacteriaceae consumed on average 65% glucoiberin and 78% glucoraphanin, transforming them into glucoiberverin and glucoerucin, respectively, and small amounts of iberverin nitrile and erucin nitrile. The lactic acid bacteria did not accumulate reduced glucosinolates, consuming all at 30-33% and transforming these into iberverin nitrile, erucin nitrile, sulforaphane nitrile, and further unidentified metabolites. Adding beneficial bacteria to a glucosinolate-rich diet may increase glucosinolate transformation, thereby increasing host exposure to bioactives.

Morphology, mechanical, cross-linking, thermal, and tribological properties of nitrile and hydrogenated nitrile rubber/multi-walled carbon nanotubes composites prepared by melt compounding: The effect of acrylonitrile content and hydrogenation

Energy Technology Data Exchange (ETDEWEB)

Likozar, Blaz, E-mail: blaz.likozar@fkkt.uni-lj.si [Polymer Competence Center Leoben GmbH, Montanuniversitaet Leoben, Roseggerstrasse 12, A-8700 Leoben (Austria); Major, Zoltan, E-mail: zoltan.major@jku.at [Polymer Competence Center Leoben GmbH, Montanuniversitaet Leoben, Roseggerstrasse 12, A-8700 Leoben (Austria)

2010-11-01

The purpose of this work was to prepare nanocomposites by mixing multi-walled carbon nanotubes (MWCNT) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). Utilization of transmission electronic microscopy (TEM), scanning electron microscopy (SEM), and small- and wide-angle X-ray scattering techniques (SAXS and WAXS) for advanced morphology observation of conducting filler-reinforced nitrile and hydrogenated nitrile rubber composites is reported. Principal results were increases in hardness (maximally 97 Shore, type A), elastic modulus (maximally 981 MPa), tensile strength (maximally 27.7 MPa), elongation at break (maximally 216%), cross-link density (maximally 7.94 x 10{sup 28} m{sup -3}), density (maximally 1.16 g cm{sup -3}), and tear strength (11.2 kN m{sup -1}), which were clearly visible at particular acrylonitrile contents both for unhydrogenated and hydrogenated polymers due to enhanced distribution of carbon nanotubes (CNT) and their aggregated particles in the applied rubber matrix. Conclusion was that multi-walled carbon nanotubes improved the performance of nitrile and hydrogenated nitrile rubber nanocomposites prepared by melt compounding.

Morphology, mechanical, cross-linking, thermal, and tribological properties of nitrile and hydrogenated nitrile rubber/multi-walled carbon nanotubes composites prepared by melt compounding: The effect of acrylonitrile content and hydrogenation

Science.gov (United States)

Likozar, Blaž; Major, Zoltan

2010-11-01

The purpose of this work was to prepare nanocomposites by mixing multi-walled carbon nanotubes (MWCNT) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). Utilization of transmission electronic microscopy (TEM), scanning electron microscopy (SEM), and small- and wide-angle X-ray scattering techniques (SAXS and WAXS) for advanced morphology observation of conducting filler-reinforced nitrile and hydrogenated nitrile rubber composites is reported. Principal results were increases in hardness (maximally 97 Shore, type A), elastic modulus (maximally 981 MPa), tensile strength (maximally 27.7 MPa), elongation at break (maximally 216%), cross-link density (maximally 7.94 × 1028 m-3), density (maximally 1.16 g cm-3), and tear strength (11.2 kN m-1), which were clearly visible at particular acrylonitrile contents both for unhydrogenated and hydrogenated polymers due to enhanced distribution of carbon nanotubes (CNT) and their aggregated particles in the applied rubber matrix. Conclusion was that multi-walled carbon nanotubes improved the performance of nitrile and hydrogenated nitrile rubber nanocomposites prepared by melt compounding.

Morphology, mechanical, cross-linking, thermal, and tribological properties of nitrile and hydrogenated nitrile rubber/multi-walled carbon nanotubes composites prepared by melt compounding: The effect of acrylonitrile content and hydrogenation

International Nuclear Information System (INIS)

Likozar, Blaz; Major, Zoltan

2010-01-01

The purpose of this work was to prepare nanocomposites by mixing multi-walled carbon nanotubes (MWCNT) with nitrile and hydrogenated nitrile elastomers (NBR and HNBR). Utilization of transmission electronic microscopy (TEM), scanning electron microscopy (SEM), and small- and wide-angle X-ray scattering techniques (SAXS and WAXS) for advanced morphology observation of conducting filler-reinforced nitrile and hydrogenated nitrile rubber composites is reported. Principal results were increases in hardness (maximally 97 Shore, type A), elastic modulus (maximally 981 MPa), tensile strength (maximally 27.7 MPa), elongation at break (maximally 216%), cross-link density (maximally 7.94 x 10 28 m -3 ), density (maximally 1.16 g cm -3 ), and tear strength (11.2 kN m -1 ), which were clearly visible at particular acrylonitrile contents both for unhydrogenated and hydrogenated polymers due to enhanced distribution of carbon nanotubes (CNT) and their aggregated particles in the applied rubber matrix. Conclusion was that multi-walled carbon nanotubes improved the performance of nitrile and hydrogenated nitrile rubber nanocomposites prepared by melt compounding.

Nitrile bonds as infrared probes of electrostatics in ribonuclease S.

Science.gov (United States)

Fafarman, Aaron T; Boxer, Steven G

2010-10-28

Three different nitrile-containing amino acids, p-cyanophenylalanine, m-cyanophenylalanine, and S-cyanohomocysteine, have been introduced near the active site of the semisynthetic enzyme ribonuclease S (RNase S) to serve as probes of electrostatic fields. Vibrational Stark spectra, measured directly on the probe-modified proteins, confirm the predominance of the linear Stark tuning rate in describing the sensitivity of the nitrile stretch to external electric fields, a necessary property for interpreting observed frequency shifts as a quantitative measure of local electric fields that can be compared with simulations. The X-ray structures of these nitrile-modified RNase variants and enzymatic assays demonstrate minimal perturbation to the structure and function, respectively, by the probes and provide a context for understanding the influence of the environment on the nitrile stretching frequency. We examine the ability of simulation techniques to recapitulate the spectroscopic properties of these nitriles as a means to directly test a computational electrostatic model for proteins, specifically that in the ubiquitous Amber-99 force field. Although qualitative agreement between theory and experiment is observed for the largest shifts, substantial discrepancies are observed in some cases, highlighting the ongoing need for experimental metrics to inform the development of theoretical models of electrostatic fields in proteins.

Cyanide hydratases and cyanide dihydratases: emerging tools in the biodegradation and biodetection of cyanide

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Veselá, Alicja Barbara; Rinágelová, Anna; Chmátal, Martin

2015-01-01

Roč. 99, č. 21 (2015), s. 8875-8882 ISSN 0175-7598 R&D Projects: GA TA ČR TA01021368; GA ČR(CZ) GAP504/11/0394 Institutional support: RVO:61388971 Keywords : Cyanide hydratase * Cyanide dihydratase * Enzyme production Subject RIV: CE - Biochemistry Impact factor: 3.376, year: 2015

Comparing the level of dexterity offered by latex and nitrile SafeSkin gloves.

Science.gov (United States)

Sawyer, Jo; Bennett, Allan

2006-04-01

An increase in the occurrence of latex allergy has been concurrent with the increasing use of latex gloves by laboratory and healthcare workers. In recent years nitrile gloves have been used to replace latex gloves to prevent latex allergy. Nitrile gloves offer a comparable level of protection against chemical and biological agents and are more puncture resistant. However, if manual dexterity is compromised by nitrile gloves to a greater degree than latex then this may increase the risk of sharps injuries. The Purdue pegboard test, which measures both gross and fine finger dexterity, was used to test the dexterity levels of two glove types used at HPA CEPR; Kimberly-Clark SafeSkin nitrile and latex laboratory gloves. There was a statistically significant 8.6% increase in fine finger dexterity provided by latex compared with nitrile SafeSkin laboratory gloves but no difference in gross dexterity between the glove types. There was no significant relationship between glove dexterity and age or gender. The selection of glove size was influenced by the digit length of participants. Moreover, those with longer, thinner fingers appeared to have an advantage when using nitrile SafeSkin gloves. The level of dexterity provided by latex and nitrile SafeSkin gloves for tasks on a gross dexterity level are comparable and health workers will benefit from the non-allergenic properties of nitrile. For tasks requiring fine finger dexterity nitrile SafeSkin gloves may impede dexterity. Despite this, the degree of restriction appears to have a negligible impact on safety in this study when compared with the risk of latex sensitization and subsequent allergy. In addition to glove material, working practices must also take into account glove size, fit, grip and thickness, as these factors can all influence dexterity.

Chiral lewis Acid catalysis in nitrile oxide cycloadditions.

Science.gov (United States)

Sibi, Mukund P; Itoh, Kennosuke; Jasperse, Craig P

2004-05-05

We describe examples of highly regio- and enantioselective nitrile oxide cycloadditions to unsaturated alkenes using substoichiometric amounts of a chiral Lewis acid. Pyrazolidinones proved to be effective achiral templates in the cycloadditions providing C-adducts typically in >30:1 selectivity and 80-99% ee. To avoid potential problems involving coordination of the Lewis acid by amine bases, we have devised a novel method for the generation of unstable nitrile oxides from hydroximinoyl chlorides using Amberlyst 21 as the base.

Active Site Mapping of Human Cathepsin F with Dipeptide Nitrile Inhibitors.

Science.gov (United States)

Schmitz, Janina; Furtmann, Norbert; Ponert, Moritz; Frizler, Maxim; Löser, Reik; Bartz, Ulrike; Bajorath, Jürgen; Gütschow, Michael

2015-08-01

Cleavage of the invariant chain is the key event in the trafficking pathway of major histocompatibility complex class II. Cathepsin S is the major processing enzyme of the invariant chain, but cathepsin F acts in macrophages as its functional synergist which is as potent as cathepsin S in invariant chain cleavage. Dedicated low-molecular-weight inhibitors for cathepsin F have not yet been developed. An active site mapping with 52 dipeptide nitriles, reacting as covalent-reversible inhibitors, was performed to draw structure-activity relationships for the non-primed binding region of human cathepsin F. In a stepwise process, new compounds with optimized fragment combinations were designed and synthesized. These dipeptide nitriles were evaluated on human cysteine cathepsins F, B, L, K and S. Compounds 10 (N-(4-phenylbenzoyl)-leucylglycine nitrile) and 12 (N-(4-phenylbenzoyl)leucylmethionine nitrile) were found to be potent inhibitors of human cathepsin F, with Ki values nitriles from our study, a 3D activity landscape was generated to visualize structure-activity relationships for this series of cathepsin F inhibitors. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Germline fumarate hydratase mutations in patients with ovarian mucinous cystadenoma

DEFF Research Database (Denmark)

Ylisaukko-oja, Sanna K.; Cybulski, Cezary; Lehtonen, Rainer

2006-01-01

Germline mutations in the fumarate hydratase (FH) gene were recently shown to predispose to the dominantly inherited syndrome, hereditary leiomyomatosis and renal cell cancer (HLRCC). HLRCC is characterized by benign leiomyomas of the skin and the uterus, renal cell carcinoma, and uterine...... leiomyosarcoma. The aim of this study was to identify new families with FH mutations, and to further examine the tumor spectrum associated with FH mutations. FH germline mutations were screened from 89 patients with RCC, skin leiomyomas or ovarian tumors. Subsequently, 13 ovarian and 48 bladder carcinomas were...

Cycloaddition of nitrones to metal-activated nitriles and isocyanides

International Nuclear Information System (INIS)

Bokach, Nadejda A

2010-01-01

1,3-Dipolar cycloaddition reactions of nitrones to nitriles and isocyanides are considered. Attention is focused on metal-mediated processes and the role played by the nature of the metal centre and its oxidation state. The published data on the selectivity of metal-mediated cycloaddition of nitrones to nitriles and the new data on the cycloaddition of nitrones to coordinated isocyanide ligands are summarized and analyzed.

Spectrometric Study of the Nitrile-Ketenimines Tautomerism

International Nuclear Information System (INIS)

Cisneros, H.S.; Laurella, S.; Ruiz, D.L.; Ponzinibbio, A.; Allegretti, P.E.; Furlong, J.J.P.

2011-01-01

Mass spectrometry is used to evaluate the occurrence of the nitrile-ketenimines tautomerism. Mass spectra of two differently substituted nitriles, ethyl-4,4-dicyano-3-methyl-3-butenoate and diethyl-2-cyano-3-methyl-2-pentenodiate are examined looking for common mass spectral behaviors. Ion fragmentation assignments for specific tautomers allow to predict the presence of the corresponding structures. Additionally, the mass spectrum and nuclear magnetic resonance spectra of ethyl-4,4-dicyano-2,2-diethyl-3-methyl-3-butenoate and that of the corresponding amination product support the occurrence of the ketenimines tautomer in the equilibrium

Spectrometric Study of the Nitrile-Ketenimine Tautomerism

Directory of Open Access Journals (Sweden)

Hebe Saraví Cisneros

2009-01-01

Full Text Available Mass spectrometry is used to evaluate the occurrence of the nitrile-ketenimine tautomerism. Mass spectra of two differently substituted nitriles, ethyl-4,4-dicyano-3-methyl-3-butenoate and diethyl-2-cyano-3-methyl-2-pentenodiate are examined looking for common mass spectral behaviors. Ion fragmentation assignments for specific tautomers allow to predict the presence of the corresponding structures. Additionally, the mass spectrum and nuclear magnetic resonance spectra of ethyl-4,4-dicyano-2,2-diethyl-3-methyl-3-butenoate and that of the corresponding amination product support the occurrence of the ketenimine tautomer in the equilibrium.

Nitrile anion cyclization with epoxysilanes followed by Brook rearrangement/ring-opening of cyclopropane nitriles/alkylation.

Science.gov (United States)

Okugawa, Seigo; Masu, Hyuma; Yamaguchi, Kentaro; Takeda, Kei

2005-12-09

[reactions: see text] The reaction of delta-silyl-gamma,delta-epoxypentanenitrile derivatives 9-12 with a base and an alkylating agent affords (Z)-delta-siloxy-gamma,delta-unsaturated pentanenitrile derivatives via a tandem process that involves the formation of a cyclopropane derivative by epoxy nitrile cyclization followed by Brook rearrangement and an anion-induced cleavage of the cyclopropane ring. Exclusive formation of a (Z)-derivative from trans-epoxides is explained by the reaction pathway that involves a backside displacement of the epoxide by the alpha-nitrile carbanion and the O-Si bond formation followed by concerted processes involving Brook rearrangement and the anti-mode of eliminative ring fission of the cyclopropane from the rotamer 19. The fact that (E)-isomers are exclusively obtained from cis-epoxides and alpha-cyclopropyl-alpha-silylcarbinol derivative 26 provides experimental support for the proposed pathway.

Theoretical studies of transition metal complexes with nitriles and isocyanides

International Nuclear Information System (INIS)

Kuznetsov, Maksim L

2002-01-01

Theoretical studies of transition metal complexes with nitriles and isocyanides are reviewed. The electronic structures and the nature of coordination bonds in these complexes are discussed. The correlation between the electronic structures of transition metal complexes with nitriles and isocyanides and their structural properties, spectroscopic characteristics, and reactivities are considered. The bibliography includes 121 references.

Nitriles at Silica Interfaces Resemble Supported Lipid Bilayers.

Science.gov (United States)

Berne, Bruce J; Fourkas, John T; Walker, Robert A; Weeks, John D

2016-09-20

Nitriles are important solvents not just for bulk reactions but also for interfacial processes such as separations, heterogeneous catalysis, and electrochemistry. Although nitriles have a polar end and a lipophilic end, the cyano group is not hydrophilic enough for these substances to be thought of as prototypical amphiphiles. This picture is now changing, as research is revealing that at a silica surface nitriles can organize into structures that, in many ways, resemble lipid bilayers. This unexpected organization may be a key component of unique interfacial behavior of nitriles that make them the solvents of choice for so many applications. The first hints of this lipid-bilayer-like (LBL) organization of nitriles at silica interfaces came from optical Kerr effect (OKE) experiments on liquid acetonitrile confined in the pores of sol-gel glasses. The orientational dynamics revealed by OKE spectroscopy suggested that the confined liquid is composed of a relatively immobile sublayer of molecules that accept hydrogen bonds from the surface silanol groups and an interdigitated, antiparallel layer that is capable of exchanging into the centers of the pores. This picture of acetonitrile has been borne out by molecular dynamics simulations and vibrational sum-frequency generation (VSFG) experiments. Remarkably, these simulations further indicate that the LBL organization is repeated with increasing disorder at least 20 Å into the liquid from a flat silica surface. Simulations and VSFG and OKE experiments indicate that extending the alkyl chain to an ethyl group leads to the formation of even more tightly packed LBL organization featuring entangled alkyl tails. When the alkyl portion of the molecule is a bulky t-butyl group, packing constraints prevent well-ordered LBL organization of the liquid. In each case, the surface-induced organization of the liquid is reflected in its interfacial dynamics. Acetonitrile/water mixtures are favored solvent systems for separations

Triphenylphosphine dibromide: A useful reagent for conversion of aldoximes into nitriles

Directory of Open Access Journals (Sweden)

Fatemeh Darvish

2015-11-01

Full Text Available A simple and convenient method for the synthesis of nitriles by dehydration of aldoximes has been developed using triphenylphosphine dibromide in acetonitrile at room temperature. A variety of aromatic and heteroaromatic aldoximes are converted into the corresponding nitriles in high yields.

Nitriles form mixed-coligand complexes with 99mTc-HYNIC-Peptide

International Nuclear Information System (INIS)

Liu Guozheng; Wescott, Charles; Sato, Aaron; Wang Yi; Liu Ning; Zhang Yumin; Rusckowski, Mary; Hnatowich, Donald J.

2002-01-01

Using a 12-amino acid peptide conjugated with HYNIC as a model, we investigated nitriles as possible coligands for labeling with 99m Tc. After the preparation of the 99m Tc labeled HYNIC-peptide using tricine as coligand, the addition of acetonitile was found by reverse phase HPLC to block further coligand exchange with ethylenediamine diacetic acid (EDDA) at room temperature. The addition of this nitrile changed the pharmacokinetics of the 99m Tc labeled peptide in normal mice towards faster clearance and significant differences in accumulation in most tissues sampled. By replacing acetonitrile with cyanoacetate, a nitrile not present in the HPLC eluant, it was possible to show the existence of a new, more hydrophilic, species by reverse phase HPLC. We conclude that nitriles can act as coligands for HYNIC-conjugated peptides labeled with 99m Tc and tricine. Furthermore, the presence of acetonitrile during Sep-Pak or HPLC purification may inadvertently generate a mixed tricine/acetonitile coligand 99m Tc-HYNIC-peptide complex

Oxidative 1,2-carboamination of alkenes with alkyl nitriles and amines toward γ-amino alkyl nitriles

Science.gov (United States)

Liu, Yan-Yun; Yang, Xu-Heng; Song, Ren-Jie; Luo, Shenglian; Li, Jin-Heng

2017-04-01

Difunctionalization of alkenes has become a powerful tool for quickly increasing molecular complexity in synthesis. Despite significant progress in the area of alkene difunctionalization involving the incorporation of a nitrogen atom across the C-C double bonds, approaches for the direct 1,2-carboamination of alkenes to produce linear N-containing molecules are scarce and remain a formidable challenge. Here we describe a radical-mediated oxidative intermolecular 1,2-alkylamination of alkenes with alkyl nitriles and amines involving C(sp3)-H oxidative functionalization catalysed by a combination of Ag2CO3 with iron Lewis acids. This three-component alkene 1,2-alkylamination method is initiated by the C(sp3)-H oxidative radical functionalization, which enables one-step formation of two new chemical bonds, a C-C bond and a C-N bond, to selectively produce γ-amino alkyl nitriles.

Metal-ligand cooperative activation of nitriles by a ruthenium complex with a de-aromatized PNN pincer ligand

NARCIS (Netherlands)

Eijsink, Linda E; Perdriau, Sébastien C P; de Vries, Johannes G; Otten, Edwin

2016-01-01

The pincer complex (PNN)RuH(CO), with a de-aromatized pyridine in the ligand backbone, is shown to react with nitriles in a metal-ligand cooperative manner. This leads to the formation of a series of complexes with new Ru-N(nitrile) and C(ligand)-C(nitrile) bonds. The initial nitrile cycloaddition

Nitrile-functionalized tertiary amines as highly efficient and reversible SO2 absorbents

International Nuclear Information System (INIS)

Hong, Sung Yun; Kim, Heehwan; Kim, Young Jin; Jeong, Junkyo; Cheong, Minserk; Lee, Hyunjoo; Kim, Hoon Sik; Lee, Je Seung

2014-01-01

Highlights: • Nitrile-functionalized tertiary amines physically and reversibly absorb SO 2 . • Tertiary alkanolamines chemically and irreversibly absorb SO 2 through OH group. • SO 2 absorption modes were studied by spectroscopy and computational calculations. -- Abstract: Three different types of nitrile-functionalized amines, including 3-(N,N-diethylamino)propionitrile (DEAPN), 3-(N,N-dibutylamino)propionitrile (DBAPN), and N-methyl-N,N-dipropionitrile amine (MADPN) were synthesized, and their SO 2 absorption performances were evaluated and compared with those of hydroxy-functionalized amines such as N,N-diethyl-N-ethanol amine (DEEA), N,N-dibutyl-N-ethanol amine (DBEA), and N-methyl-N,N-diethanol amine (MDEA). Absorption–desorption cycle experiments clearly demonstrate that the nitrile-functionalized amines are more efficient than the hydroxy-functionalized amines in terms of absorption rate and regenerability. Computational calculations with DBEA and DBAPN revealed that DBEA bearing a hydroxyethyl group chemically interacts with SO 2 through oxygen atom, forming an ionic compound with a covalently bound -OSO 2 − group. On the contrary, DBAPN bearing a nitrile group physically interacts with SO 2 through the nitrogen and the hydrogen atoms of the two methylene groups adjacent to the amino and nitrile functionalities

Green chemistry: highly selective biocatalytic hydrolysis of nitrile compounds

CSIR Research Space (South Africa)

Brady, D

2006-09-01

Full Text Available ambient temperatures and moderate pH, thereby reducing environmental impact, minimising the cost of equipment and improving reaction safety2. A further benefit is that biocatalysts can synthesise complex chemicals selectively3. This avoids... nitrile group in a dinitrile molecule permits the incorporation of the unreacted nitrile into the final product or further functionalisation, such as reduction to an amino group. Hence, these enzymes can be used to provide access to specific complex...

Nitrilases in nitrile biocatalysis: recent progress and forthcoming research

Directory of Open Access Journals (Sweden)

Gong Jin-Song

2012-10-01

Full Text Available Abstract Over the past decades, nitrilases have drawn considerable attention because of their application in nitrile degradation as prominent biocatalysts. Nitrilases are derived from bacteria, filamentous fungi, yeasts, and plants. In-depth investigations on their natural sources function mechanisms, enzyme structure, screening pathways, and biocatalytic properties have been conducted. Moreover, the immobilization, purification, gene cloning and modifications of nitrilase have been dwelt upon. Some nitrilases are used commercially as biofactories for carboxylic acids production, waste treatment, and surface modification. This critical review summarizes the current status of nitrilase research, and discusses a number of challenges and significant attempts in its further development. Nitrilase is a significant and promising biocatalyst for catalytic applications.

Nitrilases in nitrile biocatalysis: recent progress and forthcoming research

Science.gov (United States)

2012-01-01

Over the past decades, nitrilases have drawn considerable attention because of their application in nitrile degradation as prominent biocatalysts. Nitrilases are derived from bacteria, filamentous fungi, yeasts, and plants. In-depth investigations on their natural sources function mechanisms, enzyme structure, screening pathways, and biocatalytic properties have been conducted. Moreover, the immobilization, purification, gene cloning and modifications of nitrilase have been dwelt upon. Some nitrilases are used commercially as biofactories for carboxylic acids production, waste treatment, and surface modification. This critical review summarizes the current status of nitrilase research, and discusses a number of challenges and significant attempts in its further development. Nitrilase is a significant and promising biocatalyst for catalytic applications. PMID:23106943

Degradation of nitrile rubber fuel hose by biodiesel use

International Nuclear Information System (INIS)

Coronado, Marcos; Montero, Gisela; Valdez, Benjamín; Stoytcheva, Margarita; Eliezer, Amir; García, Conrado; Campbell, Héctor; Pérez, Armando

2014-01-01

Nowadays biodiesel is becoming an increasingly important and popular fuel, obtained from renewable sources, and contributes to pollutant emissions reduction and decreasing fossil fuels dependence. However, its easier oxidation and faster degradation in comparison to diesel led to compatibility problems between biodiesel and various metallic and polymeric materials contacted. Therefore, the objective of this work is to investigate the effect of different mixtures diesel–biodiesel (fuel type B5, B10, B20) used in Baja California, Mexico on the resistance of nitrile rubber fuel hoses at temperatures of 25 °C and 70 °C applying gravimetric tests, tensile strength measurements and scanning electron microscopy analysis. The factors affecting the material mass change were identified using an experimental design analysis. It was found that the fuel temperature did not conduct to significant mass loss of nitrile rubber fuel hose, while biodiesel concentration affected the properties of the elastomer, causing the phenomenon of swelling. The exposure of hoses to fuel with increasing concentrations of biodiesel led to tensile strength decrease. - Highlights: • The biodiesel oxidation led to problems with polymeric materials. • The degradation of a nitrile rubber fuel hose in biodiesel blends was assessed. • The nitrile rubber showed greater affinity for biodiesel than diesel. • The elastomer swelled, cracked and lost its mechanical properties by biodiesel. • SEM analysis confirmed surface morphology changes in higher biodiesel blends

生体触媒の化学工業への導入

OpenAIRE

長澤, 透

1996-01-01

Microbial processes for industrial production of commodity chemicals are rapidly gaining practical significance for preparation of high purity products, in an environmentally acceptable manner, while realizing energy savings. The use of bacterial nitrile hydratase for industrial production of the important chemical, acrylamide, was recently pioneered in Japan. We review here the enzymatic production of acrylamide and recent progress in the production of other commodity chemicals through micro...

Copper-catalyzed one-pot synthesis of 1,2,4-triazoles from nitriles and hydroxylamine.

Science.gov (United States)

Xu, Hao; Ma, Shuang; Xu, Yuanqing; Bian, Longxiang; Ding, Tao; Fang, Xiaomin; Zhang, Wenkai; Ren, Yanrong

2015-02-06

A simple and efficient copper-catalyzed one-pot synthesis of substituted 1,2,4-triazoles through reactions of two nitriles with hydroxylamine has been developed. The protocol uses simple and readily available nitriles and hydroxylamine hydrochloride as the starting materials and inexpensive Cu(OAc)2 as the catalyst, and the corresponding 1,2,4-triazole derivatives are obtained in moderate to good yields. The reactions include sequential intermolecular addition of hydroxylamine to one nitrile to provide amidoxime, copper-catalyzed treatment of the amidoxime with another nitrile, and intramolecular dehydration/cyclization. This finding provides a new and useful strategy for synthesis of 1,2,4-triazole derivatives.

Tetra­kis(aceto­nitrile)copper(I) hydrogen oxalate–oxalic acid–aceto­nitrile (1/0.5/0.5)

Science.gov (United States)

Royappa, A. Timothy; Stepherson, Jacob R.; Vu, Oliver D.; Royappa, Andrew D.; Stern, Charlotte L.; Müller, Peter

2013-01-01

In the title compound, [Cu(CH3CN)4](C2HO4)·0.5C2H2O4·0.5CH3CN, the CuI ion is coordinated by the N atoms of four aceto­nitrile ligands in a slightly distorted tetra­hedral environment. The oxalic acid mol­ecule lies across an inversion center. The aceto­nitrile solvent mol­ecule is disordered across an inversion center and was refined with half occupancy. In the crystal, the hydrogen oxalate anions and oxalic acid mol­ecules are linked via O—H⋯O hydrogen bonds, forming chains along [010]. PMID:24098175

A Direct Comparison of Azide and Nitrile Vibrational Probes

Science.gov (United States)

Gai, Xin Sonia; Coutifaris, Basil A.; Brewer, Scott H.; Fenlon, Edward E.

2011-01-01

The synthesis of 2′-azido-5-cyano-2′-deoxyuridine, N3CNdU (1), from trityl-protected 2′-amino-2′-deoxyuridine was accomplished in four steps with a 12.5% overall yield. The IR absorption positions and profiles of the azide and nitrile group of N3CNdU were investigated in 14 different solvents and water/DMSO solvent mixtures. The azide probe was superior to the nitrile probe in terms of its extinction coefficient, which is 2–4 times larger. However, the nitrile IR absorbance profile is generally less complicated by accidental Fermi resonance. The IR frequencies of both probes undergo a substantial red shift upon going from water to aprotic solvents such as THF or DMSO. DFT calculations supported the hypothesis that the molecular origin of the higher observed frequency in water is primarily due to hydrogen bonds between the probes and water molecules. PMID:21336362

Synthesis of Nitriles via Palladium-Catalyzed Water Shuffling from Amides to Acetonitrile

OpenAIRE

Zhang, Wandi; Haskins, Christopher W.; Yang, Yang; Dai, Mingji

2014-01-01

Palladium-catalyzed synthesis of nitriles from amides has been described. Two similar, but complementary reaction conditions have been identified to convert various amides including α,β,γ,δ-unsaturated amides, cinnamides, aromatic amides and alkyl amides to the corresponding nitriles in good to excellent yield.

Synthesis of nitriles via palladium-catalyzed water shuffling from amides to acetonitrile.

Science.gov (United States)

Zhang, Wandi; Haskins, Christopher W; Yang, Yang; Dai, Mingji

2014-12-07

Palladium-catalyzed synthesis of nitriles from amides has been described. Two similar, but complementary reaction conditions have been identified to convert various amides including α,β,γ,δ-unsaturated amides, cinnamides, aromatic amides and alkyl amides to the corresponding nitriles in good to excellent yield.

Synthetic Applications of Nitrile-Converting Enzymes

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Mylerová, Veronika

2003-01-01

Roč. 7, - (2003), s. 1279-1295 ISSN 1385-2728 R&D Projects: GA AV ČR IAA4020213 Institutional research plan: CEZ:AV0Z5020903 Keywords : nitrile * converting * enzymes Subject RIV: EE - Microbiology, Virology Impact factor: 2.521, year: 2003

Correlating Nitrile IR Frequencies to Local Electrostatics Quantifies Noncovalent Interactions of Peptides and Proteins.

Science.gov (United States)

Deb, Pranab; Haldar, Tapas; Kashid, Somnath M; Banerjee, Subhrashis; Chakrabarty, Suman; Bagchi, Sayan

2016-05-05

Noncovalent interactions, in particular the hydrogen bonds and nonspecific long-range electrostatic interactions are fundamental to biomolecular functions. A molecular understanding of the local electrostatic environment, consistently for both specific (hydrogen-bonding) and nonspecific electrostatic (local polarity) interactions, is essential for a detailed understanding of these processes. Vibrational Stark Effect (VSE) has proven to be an extremely useful method to measure the local electric field using infrared spectroscopy of carbonyl and nitrile based probes. The nitrile chemical group would be an ideal choice because of its absorption in an infrared spectral window transparent to biomolecules, ease of site-specific incorporation into proteins, and common occurrence as a substituent in various drug molecules. However, the inability of VSE to describe the dependence of IR frequency on electric field for hydrogen-bonded nitriles to date has severely limited nitrile's utility to probe the noncovalent interactions. In this work, using infrared spectroscopy and atomistic molecular dynamics simulations, we have reported for the first time a linear correlation between nitrile frequencies and electric fields in a wide range of hydrogen-bonding environments that may bridge the existing gap between VSE and H-bonding interactions. We have demonstrated the robustness of this field-frequency correlation for both aromatic nitriles and sulfur-based nitriles in a wide range of molecules of varying size and compactness, including small molecules in complex solvation environments, an amino acid, disordered peptides, and structured proteins. This correlation, when coupled to VSE, can be used to quantify noncovalent interactions, specific or nonspecific, in a consistent manner.

[Effect of melaxen and valdoxan on free radical processes intensity, aconitate hydratase activity and citrate content in rats tissues under hyperthyroidism].

Science.gov (United States)

Gorbenko, M V; Popova, T N; Shul'gin, K K; Popov, S S; Agarkov, A A

2014-01-01

The influence of melaxen and valdoxan on the biochemiluminescence parameters, aconitate hydratase activity and citrate level in rats heart and liver during development of experimental hyperthyroidism has been investigated. Administration of these substances promoted a decrease of biochemiluminescence parameters, which had been increased in tissues of rats in response to the development of oxidative stress under hyperthyroidism. Aconitate hydratase activity and citrate concentration in rats liver and heart, growing at pathological conditions, changed towards control value after administration of the drugs correcting melatonin level. The results indicate the positive effect of valdoxan and melaxen on oxidative status of the organism under the development of experimental hyperthyroidism that is associated with antioxidant action of melatonin.

Compatibilization efficiency of carboxylated nitrile rubber and epoxy pre-polymer in nitrile/acrylic rubber blends

Directory of Open Access Journals (Sweden)

Micheli L. Celestin

2013-01-01

Full Text Available An investigation has been made of the effects from a compatibilizer, viz. carboxylated nitrile rubber (XNBR, on several properties of nitrile rubber (NBR and acrylic rubber (ACM blends, including curing characteristics, mechanical, dynamic mechanical and dielectric properties. The presence of XNBR until 10 phr resulted in an improvement of the ultimate tensile properties, especially elongation at break. The mechanical properties associated to the volume fraction of rubber in the network (Vr and torque values suggest the co-vulcanization phenomenon imparted by the compatibilization. The oil resistance of NBR/ACM (50:50 wt. (% blends (compatibilized and non compatibilized was similar to that observed for pure ACM and significantly higher than NBR. The addition of small amounts of epoxy pre-polymer in combination with XNBR resulted in an additional improvement of the tensile properties. The dynamic mechanical and dielectric properties of the blends were also investigated. The loss modulus values of the compatibilized blends were significantly lower indicating an increase of the elastic characteristics. All blends presented two dielectric relaxation peaks confirming the heterogeneity of the compatibilized blends

Reactions of nitriles with iodonium salt of bis(1,2-dicarbollyl)cobalt

International Nuclear Information System (INIS)

Knyazev, S.P.; Kirin, V.N.; Chernyshev, E.A.

1996-01-01

Interaction of nitriles with iodonium salt bis(1,2-dicarbollyl)cobalt, resulting in the 8,8'-disubstituted derivatives, is studied. Interaction of nitrile group with iodonium fragment is accompanied by B-I bond discontinuity and by formation of B-N bond with subsequent formation of amino alcohol, which regroups into amide. 3 refs

Optimization of triazine nitriles as rhodesain inhibitors: structure-activity relationships, bioisosteric imidazopyridine nitriles, and X-ray crystal structure analysis with human cathepsin L.

Science.gov (United States)

Ehmke, Veronika; Winkler, Edwin; Banner, David W; Haap, Wolfgang; Schweizer, W Bernd; Rottmann, Matthias; Kaiser, Marcel; Freymond, Céline; Schirmeister, Tanja; Diederich, François

2013-06-01

The cysteine protease rhodesain of Trypanosoma brucei parasites causing African sleeping sickness has emerged as a target for the development of new drug candidates. Based on a triazine nitrile moiety as electrophilic headgroup, optimization studies on the substituents for the S1, S2, and S3 pockets of the enzyme were performed using structure-based design and resulted in inhibitors with inhibition constants in the single-digit nanomolar range. Comprehensive structure-activity relationships clarified the binding preferences of the individual pockets of the active site. The S1 pocket tolerates various substituents with a preference for flexible and basic side chains. Variation of the S2 substituent led to high-affinity ligands with inhibition constants down to 2 nM for compounds bearing cyclohexyl substituents. Systematic investigations on the S3 pocket revealed its potential to achieve high activities with aromatic vectors that undergo stacking interactions with the planar peptide backbone forming part of the pocket. X-ray crystal structure analysis with the structurally related enzyme human cathepsin L confirmed the binding mode of the triazine ligand series as proposed by molecular modeling. Sub-micromolar inhibition of the proliferation of cultured parasites was achieved for ligands decorated with the best substituents identified through the optimization cycles. In cell-based assays, the introduction of a basic side chain on the inhibitors resulted in a 35-fold increase in antitrypanosomal activity. Finally, bioisosteric imidazopyridine nitriles were studied in order to prevent off-target effects with unselective nucleophiles by decreasing the inherent electrophilicity of the triazine nitrile headgroup. Using this ligand, the stabilization by intramolecular hydrogen bonding of the thioimidate intermediate, formed upon attack of the catalytic cysteine residue, compensates for the lower reactivity of the headgroup. The imidazopyridine nitrile ligand showed

Nitrile-functionalized tertiary amines as highly efficient and reversible SO2 absorbents.

Science.gov (United States)

Hong, Sung Yun; Kim, Heehwan; Kim, Young Jin; Jeong, Junkyo; Cheong, Minserk; Lee, Hyunjoo; Kim, Hoon Sik; Lee, Je Seung

2014-01-15

Three different types of nitrile-functionalized amines, including 3-(N,N-diethylamino)propionitrile (DEAPN), 3-(N,N-dibutylamino)propionitrile (DBAPN), and N-methyl-N,N-dipropionitrile amine (MADPN) were synthesized, and their SO2 absorption performances were evaluated and compared with those of hydroxy-functionalized amines such as N,N-diethyl-N-ethanol amine (DEEA), N,N-dibutyl-N-ethanol amine (DBEA), and N-methyl-N,N-diethanol amine (MDEA). Absorption-desorption cycle experiments clearly demonstrate that the nitrile-functionalized amines are more efficient than the hydroxy-functionalized amines in terms of absorption rate and regenerability. Computational calculations with DBEA and DBAPN revealed that DBEA bearing a hydroxyethyl group chemically interacts with SO2 through oxygen atom, forming an ionic compound with a covalently bound OSO2(-) group. On the contrary, DBAPN bearing a nitrile group physically interacts with SO2 through the nitrogen and the hydrogen atoms of the two methylene groups adjacent to the amino and nitrile functionalities. Copyright © 2013 Elsevier B.V. All rights reserved.

Comparison of the effect of using latex and nitrile gloves hand dexterity among Iranian population

Directory of Open Access Journals (Sweden)

T. Allahyari

2014-02-01

.Conclusion: Considering that there was no significant difference in the score of both fine finger and gross hand dexterity while using nitrile gloves as compared to the control condition (without gloves, means that use of nitrile gloves has no adverse effect on hand dexterity therefore, using nitrile gloves is recommended as a alternative for the latex gloves, considering the additional advantage of no allergic reaction in this gloves.

Changes in chemical permeation of disposable latex, nitrile, and vinyl gloves exposed to simulated movement.

Science.gov (United States)

Phalen, Robert N; Le, Thi; Wong, Weng Kee

2014-01-01

Glove movement can affect chemical permeation of organic compounds through polymer glove products. However, conflicting reports make it difficult to compare the effects of movement on chemical permeation through commonly available glove types. The aim of this study was to evaluate the effect of movement on chemical permeation of an organic solvent through disposable latex, nitrile, and vinyl gloves. Simulated whole-glove permeation testing was conducted using ethyl alcohol and a previously designed permeation test system. With exposure to movement, a significant decrease (p ≤ 0.001) in breakthrough time (BT) was observed for the latex (-23%) and nitrile gloves (-31%). With exposure to movement, only the nitrile glove exhibited a significant increase (p ≤ 0.001) in steady-state permeation rate (+47%) and cumulative permeation at 30 min (+111%). Even though the nitrile glove provided optimum chemical resistance against ethyl alcohol, it was most affected by movement. With exposure to movement, the latex glove was an equivalent option for overall worker protection, because it was less affected by movement and the permeation rate was lower than that of the nitrile glove. In contrast, the vinyl glove was the least affected by movement, but did not provide adequate chemical resistance to ethyl alcohol in comparison with the nitrile and latex gloves. Glove selection should take movement and polymer type into account. Some glove polymer types are less affected by movement, most notably the latex glove in this test. With nitrile gloves, at least a factor of three should be used when attempting to assign a protection factor when repetitive hand motions are anticipated. Ultimately, the latex gloves outperformed nitrile and vinyl in these tests, which evaluated the effect of movement on chemical permeation. Future research should aim to resolve some of the observed discrepancies in test results with latex and vinyl gloves.

Nitrile-functionalized tertiary amines as highly efficient and reversible SO{sub 2} absorbents

Energy Technology Data Exchange (ETDEWEB)

Hong, Sung Yun; Kim, Heehwan; Kim, Young Jin; Jeong, Junkyo; Cheong, Minserk [Department of Chemistry and Research Institute of Basic Sciences, Kyung Hee University, 1 Hoegi-dong, Dongdaemun-gu, Seoul 130-701 (Korea, Republic of); Lee, Hyunjoo [Clean Energy Center, Korea Institute of Science and Technology, Seoul 136-791 (Korea, Republic of); Kim, Hoon Sik, E-mail: khs2004@khu.ac.kr [Department of Chemistry and Research Institute of Basic Sciences, Kyung Hee University, 1 Hoegi-dong, Dongdaemun-gu, Seoul 130-701 (Korea, Republic of); Lee, Je Seung, E-mail: leejs70@khu.ac.kr [Department of Chemistry and Research Institute of Basic Sciences, Kyung Hee University, 1 Hoegi-dong, Dongdaemun-gu, Seoul 130-701 (Korea, Republic of)

2014-01-15

Highlights: • Nitrile-functionalized tertiary amines physically and reversibly absorb SO{sub 2}. • Tertiary alkanolamines chemically and irreversibly absorb SO{sub 2} through OH group. • SO{sub 2} absorption modes were studied by spectroscopy and computational calculations. -- Abstract: Three different types of nitrile-functionalized amines, including 3-(N,N-diethylamino)propionitrile (DEAPN), 3-(N,N-dibutylamino)propionitrile (DBAPN), and N-methyl-N,N-dipropionitrile amine (MADPN) were synthesized, and their SO{sub 2} absorption performances were evaluated and compared with those of hydroxy-functionalized amines such as N,N-diethyl-N-ethanol amine (DEEA), N,N-dibutyl-N-ethanol amine (DBEA), and N-methyl-N,N-diethanol amine (MDEA). Absorption–desorption cycle experiments clearly demonstrate that the nitrile-functionalized amines are more efficient than the hydroxy-functionalized amines in terms of absorption rate and regenerability. Computational calculations with DBEA and DBAPN revealed that DBEA bearing a hydroxyethyl group chemically interacts with SO{sub 2} through oxygen atom, forming an ionic compound with a covalently bound -OSO{sub 2}{sup −} group. On the contrary, DBAPN bearing a nitrile group physically interacts with SO{sub 2} through the nitrogen and the hydrogen atoms of the two methylene groups adjacent to the amino and nitrile functionalities.

Investigation of surface halide modification of nitrile butadiene rubber

Science.gov (United States)

Sukhareva, K. V.; Mikhailov, I. A.; Andriasyan, Yu O.; Mastalygina, E. E.; Popov, A. A.

2017-12-01

The investigation is devoted to the novel technology of surface halide modification of rubber samples based on nitrile butadiene rubber (NBR). 1,1,2-trifluoro-1,2,2-trichlorethane was used as halide modifier. The developed technology is characterized by production stages reduction to one by means of treating the rubber compound with a halide modifier. The surface halide modification of compounds based on nitrile butadiene rubber (NBR) was determined to result in increase of resistance to thermal oxidation and aggressive media. The conducted research revealed the influence of modification time on chemical resistance and physical-mechanical properties of rubbers under investigation.

Catalytic Synthesis of Nitriles in Continuous Flow

DEFF Research Database (Denmark)

Nordvang, Emily Catherine

The objective of this thesis is to report the development of a new, alternative process for the flexible production of nitrile compounds in continuous flow. Nitriles are an important class of compounds that find applications as solvents, chemical intermediates and pharmaceutical compounds......, alternative path to acetonitrile from ethanol via the oxidative dehydrogenation of ethylamine. The catalytic activity and product ratios of the batch and continuous flow reactions are compared and the effect of reaction conditions on the reaction is investigated. The effects of ammonia in the reaction...... dehydrogenation of ethylamine and post-reaction purging.Chapter 4 outlines the application of RuO2/Al2O3 catalysts to the oxidative dehydrogenation of benzylamine in air, utilizing a new reaction setup. Again, batch and continuous flow reactions are compared and the effects of reaction conditions, ammonia...

The integration of cyanide hydratase and tyrosinase catalysts enables effective degradation of cyanide and phenol in coking wastewaters.

Science.gov (United States)

Martínková, Ludmila; Chmátal, Martin

2016-10-01

The aim of this study was to design an effective method for the bioremediation of coking wastewaters, specifically for the concurrent elimination of their highly toxic components - cyanide and phenols. Almost full degradation of free cyanide (0.32-20 mM; 8.3-520 mg L(-1)) in the model and the real coking wastewaters was achieved by using a recombinant cyanide hydratase in the first step. The removal of cyanide, a strong inhibitor of tyrosinase, enabled an effective degradation of phenols by this enzyme in the second step. Phenol (16.5 mM, 1,552 mg L(-1)) was completely removed from a real coking wastewater within 20 h and cresols (5.0 mM, 540 mg L(-1)) were removed by 66% under the same conditions. The integration of cyanide hydratase and tyrosinase open up new possibilities for the bioremediation of wastewaters with complex pollution. Copyright © 2016 Elsevier Ltd. All rights reserved.

VACUUM ULTRAVIOLET PHOTOABSORPTION SPECTRA OF NITRILE ICES FOR THEIR IDENTIFICATION ON PLUTO

International Nuclear Information System (INIS)

Sivaraman, B.; Pavithraa, S.; Lo, J.-I.; Cheng, B.-M.; Sekhar, B. N. Raja; Hill, H.; Mason, N. J.

2016-01-01

Icy bodies, such as Pluto, are known to harbor simple and complex molecules. The recent New Horizons flyby of Pluto has revealed a complex surface composed of bright and dark ice surfaces, indicating a rich chemistry based on nitrogen (N 2 ), methane (CH 4 ), and carbon monoxide (CO). Nitrile (CN) containing molecules such as acetonitrile (CH 3 CN), propionitrile (CH 3 CH 2 CN), butyronitrile (CH 3 CH 2 CH 2 CN), and isobutyronitrile ((CH 3 ) 2 CHCN) are some of the nitrile molecules that are known to be synthesized by radiative processing of such simple ices. Through the provision of a spectral atlas for such compounds we propose that such nitriles may be identified from the ALICE payload on board New Horizons .

Computational study on the inhibition mechanism of cruzain by nitrile-containing molecules.

Science.gov (United States)

Méndez-Lucio, Oscar; Romo-Mancillas, Antonio; Medina-Franco, José L; Castillo, Rafael

2012-05-01

Cysteine proteases from parasites as well as from mammals are promising drug targets for parasitic infections and systemic human diseases, respectively. Many reversible and irreversible inhibitors of this very large class of proteins have been designed. Among others, molecules with a nitrile moiety, which is a group that is susceptible to a nucleophilic attack by the enzyme, have been identified as good inhibitors. Although it is known that the nitrile group binds covalently to Cys25, there are no reports about the energetics involved in the mechanism of this process. Herein, density functional theory and quantum semi-empirical calculations were conducted in order to study the molecular recognition of cysteine proteases by nitrile-containing molecules. Results reported in this paper suggest an interaction that starts with a nucleophilic attack from the Cys25 to the inhibitor followed by a proton transfer from His162. Only one transition state was detected; however, we found the existence of an energy plateau in the potential energy surface. Based on the proposed mechanism, some structural features that could improve the biological activity of nitrile-containing molecules toward cysteine proteases are discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

Ruthenium on chitosan: A recyclable heterogeneous catalyst for aqueous hydration of nitriles to amides

Science.gov (United States)

Ruthenium has been immobilized over chitosan by simply stirring an aqueous suspension of chitosan in water with ruthenium chloride and has been utilized for the oxidation of nitriles to amides; the hydration of nitriles occurs in high yield and excellent selectivity, which procee...

Real-time PCR detection of aldoxime dehydratase genes in nitrile-degrading microorganisms.

Science.gov (United States)

Dooley-Cullinane, Tríona Marie; O'Reilly, Catherine; Coffey, Lee

2017-02-01

Aldoxime dehydratase catalyses the conversion of aldoximes to their corresponding nitriles. Utilization of the aldoxime-nitrile metabolising enzyme pathway can facilitate the move towards a greener chemistry. In this work, a real-time PCR assay was developed for the detection of aldoxime dehydratase genes in aldoxime/nitrile metabolising microorganisms which have been purified from environmental sources. A conventional PCR assay was also designed allowing gene confirmation via sequencing. Aldoxime dehydratase genes were identified in 30 microorganisms across 11 genera including some not previously shown to harbour the gene. The assay displayed a limit of detection of 1 pg/μL DNA or 7 CFU/reaction. This real-time PCR assay should prove valuable in the high-throughput screening of micro-organisms for novel aldoxime dehydratase genes towards pharmaceutical and industrial applications.

Selective and reactive hydration of nitriles to amides in water using silver nanoparticles stabilized by organic ligands

International Nuclear Information System (INIS)

Kawai, Koji; Kawakami, Hayato; Narushima, Takashi; Yonezawa, Tetsu

2015-01-01

Water-dispersible silver nanoparticles stabilized by silver–carbon covalent bonds were prepared. They exhibited high catalytic activities for the selective hydration of nitriles to amides in water. The activation of a nitrile group by the functional groups of the substrates and the hydrophobic layer on the nanoparticles influenced the catalyzed reaction were confirmed. Alkyl nitriles could also be selectively hydrated

Role of CYP2E1-mediated metabolism in the acute and vestibular toxicities of nineteen nitriles in the mouse.

Science.gov (United States)

Saldaña-Ruíz, Sandra; Soler-Martín, Carla; Llorens, Jordi

2012-01-25

Allylnitrile, cis-crotononitrile, and 3,3'-iminodipropionitrile are known to cause vestibular toxicity in rodents, and evidence is available indicating that cis-2-pentenenitrile shares this effect. We evaluated nineteen nitriles for vestibular toxicity in wild type (129S1) and CYP2E1-null mice, including all the above, several neurotoxic nitriles, and structurally similar nitriles. A new acute toxicity test protocol was developed to facilitate evaluation of the vestibular toxicity by a specific behavioral test battery at doses up to sub-lethal levels while using a limited number of animals. A mean number of 8.5±0.3 animals per nitrile, strain and sex was necessary to obtain evidence of vestibular toxicity and optionally an estimation of the lethal dose. For several but not all nitriles, lethal doses significantly increased in CYP2E1-null mice. The protocol revealed the vestibular toxicity of five nitriles, including previously identified ototoxic compounds and one nitrile (trans-crotononitrile) known to have a different profile of neurotoxic effects in the rat. In all five cases, both sexes were affected and no decrease in susceptibility was apparent in CYP2E1-null mice respect to 129S1 mice. Fourteen nitriles caused no vestibular toxicity, including six nitriles tested in CYP2E1-null mice at doses significantly larger than the maximal doses that can be tested in wild type animals. We conclude that only a subset of low molecular weight nitriles is toxic to the vestibular system, that species-dependent differences exist in this vestibular toxicity, and that CYP2E1-mediated metabolism is not involved in this effect of nitriles although it has a role in the acute lethality of some of these compounds. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

The integration of cyanide hydratase and tyrosinase catalysts enables effective degradation of cyanide and phenol in coking wastewaters

Czech Academy of Sciences Publication Activity Database

Martínková, Ludmila; Chmátal, Martin

2016-01-01

Roč. 102, October (2016), s. 90-95 ISSN 0043-1354 R&D Projects: GA TA ČR TA01021368; GA TA ČR(CZ) TA04021212; GA MŠk(CZ) LD12049 Institutional support: RVO:61388971 Keywords : Cyanide hydratase * Tyrosinase * Cyanide Subject RIV: CE - Biochemistry Impact factor: 6.942, year: 2016

Ruthenium Tris(2-pyridylmethyl)amine as an Effective Photocaging Group for Nitriles

Science.gov (United States)

2015-01-01

Ruthenium(II) tris(2-pyridylmethyl)amine (TPA) is an effective caging group for nitriles that provides high levels of control over the enzyme activity with light. Two caged nitriles were prepared, [Ru(TPA)(MeCN)2](PF6)2 (1) and [Ru(TPA)(3)2](PF6)2 (2), where 3 is the cathepsin K inhibitor Cbz-Leu-NHCH2CN, and characterized by various spectroscopic techniques and mass spectrometry. Both 1 and 2 show the release of a single nitrile within 20 min of irradiation with 365 nm light. Complex 2 acts as a potent, photoactivated inhibitor of human cathepsin K. IC50 values were determined for 2 and 3. Enzyme inhibition for 2 was enhanced by a factor of 89 upon exposure to light, with IC50 values of 63 nM (light) and 5.6 μM (dark). PMID:24661182

4-Oxalocrotonate tautomerase, its homologue YwhB, and active vinylpyruvate hydratase : Synthesis and evaluation of 2-fluoro substrate analogues

NARCIS (Netherlands)

Johnson, William H; Wang, Susan C; Stanley, Thanuja M; Czerwinski, Robert M; Almrud, Jeffrey J; Poelarends, Gerrit J; Murzin, Alexey G; Whitman, Christian P

2004-01-01

A series of 2-fluoro-4-alkene and 2-fluoro-4-alkyne substrate analogues were synthesized and examined as potential inhibitors of three enzymes: 4-oxalocrotonate tautomerase (4-OT) and vinylpyruvate hydratase (VPH) from the catechol meta-fission pathway and a closely related 4-OT homologue found in

Cyanide hydratase from Aspergillus niger K10: Overproduction in Escherichia coli, purification, characterization and use in continuous cyanide degradation

Czech Academy of Sciences Publication Activity Database

Rinágelová, Anna; Kaplan, Ondřej; Veselá, Alicja Barbara; Chmátal, Martin; Křenková, Alena; Plíhal, Ondřej; Pasquarelli, Fabrizia; Cantarella, M.; Martínková, Ludmila

2014-01-01

Roč. 49, č. 3 (2014), s. 445-450 ISSN 1359-5113 R&D Projects: GA ČR(CZ) GAP504/11/0394; GA TA ČR TA01021368 Institutional support: RVO:61388971 Keywords : Cyanide hydratase * Nitrilase * Aspergillus niger Subject RIV: CE - Biochemistry Impact factor: 2.516, year: 2014

Reactions of acid bisphosphonodithioates with nitriles

International Nuclear Information System (INIS)

Kutyrev, G.A.; Korolev, O.S.; Yarkova, E.G.; Cherkasov, R.A.; Pudovik, A.N.

1986-01-01

The reactions of acid bisphosphonodithioates with aceto- and benzo-nitriles go with the intermediate formation of a 1:1 adduct, which breaks down into a thioamide and a cyclic trithiopyrophosphonate. The stability of the latter falls with the lengthening of the carbon chain in the original thiophosphorus reactant. A detailed analysis of IR and NMR spectra is given to confirm these results

Capture of an elusive nitrile ylide as an intermediate in isoxazole-oxazole photoisomerization.

Science.gov (United States)

Nunes, Cláudio M; Reva, Igor; Fausto, Rui

2013-11-01

The unimolecular photochemistry of 3,5-dimethylisoxazole (1) induced by a narrow-band tunable UV laser was studied using low-temperature matrix isolation coupled with infrared spectroscopy. Monomers of 1 were isolated in argon matrices at 15 K and characterized spectroscopically. Irradiation of matrix-isolated 1 at λ = 222 nm (near its absorption maximum) led to the corresponding 2H-azirine 3 and ketenimine 6 as primary photoproducts and also to nitrile ylide 4 and 2,5-dimethyloxazole (5). The photoproducts were identified (i) by comparison with infrared spectra of authentic matrix-isolated samples of 3 and 5 and (ii) using additional irradiations at longer wavelengths (where 1 does not react) which induce selective photoisomerizations of 4 and 6. In particular, irradiation with λ = 340 nm led to the unequivocal identification of the nitrile ylide anti-4, which was transformed into oxazole 5. The details of the 1,5-electrocyclization of the carbonyl nitrile ylide 4 and its structural nature (propargyl-like versus allene-like geometry) were also characterized using theoretical calculations. Thus, the elusive carbonyl nitrile ylide 4 was captured and characterized for the first time as an intermediate in the isoxazole-oxazole photoisomerization.

Identification and characterization of an oleate hydratase-encoding gene from Bifidobacterium breve.

Science.gov (United States)

O'Connell, Kerry Joan; Motherway, Mary O'Connell; Hennessey, Alan A; Brodhun, Florian; Ross, R Paul; Feussner, Ivo; Stanton, Catherine; Fitzgerald, Gerald F; van Sinderen, Douwe

2013-01-01

Bifidobacteria are common commensals of the mammalian gastrointestinal tract. Previous studies have suggested that a bifidobacterial myosin cross reactive antigen (MCRA) protein plays a role in bacterial stress tolerance, while this protein has also been linked to the biosynthesis of conjugated linoleic acid (CLA) in bifidobacteria. In order to increase our understanding on the role of MCRA in bifidobacteria we created and analyzed an insertion mutant of the MCRA-encoding gene of B. breve NCFB 2258. Our results demonstrate that the MCRA protein of B. breve NCFB 2258 does not appear to play a role in CLA production, yet is an oleate hydratase, which contributes to bifidobacterial solvent stress protection.

A Single Enzyme Transforms a Carboxylic Acid into a Nitrile through an Amide Intermediate.

Science.gov (United States)

Nelp, Micah T; Bandarian, Vahe

2015-09-01

The biosynthesis of nitriles is known to occur through specialized pathways involving multiple enzymes; however, in bacterial and archeal biosynthesis of 7-deazapurines, a single enzyme, ToyM, catalyzes the conversion of the carboxylic acid containing 7-carboxy-7-deazaguanine (CDG) into its corresponding nitrile, 7-cyano-7-deazaguanine (preQ0 ). The mechanism of this unusual direct transformation was shown to proceed via the adenylation of CDG, which activates it to form the newly discovered amide intermediate 7-amido-7-deazaguanine (ADG). This is subsequently dehydrated to form the nitrile in a process that consumes a second equivalent of ATP. The authentic amide intermediate is shown to be chemically and kinetically competent. The ability of ToyM to activate two different substrates, an acid and an amide, accounts for this unprecedented one-enzyme catalysis of nitrile synthesis, and the differential rates of these two half reactions suggest that this catalytic ability is derived from an amide synthetase that gained a new function. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Structural Basis of Biological Nitrile Reduction*

Science.gov (United States)

Chikwana, Vimbai M.; Stec, Boguslaw; Lee, Bobby W. K.; de Crécy-Lagard, Valérie; Iwata-Reuyl, Dirk; Swairjo, Manal A.

2012-01-01

The enzyme QueF catalyzes the reduction of the nitrile group of 7-cyano-7-deazaguanine (preQ0) to 7-aminomethyl-7-deazaguanine (preQ1), the only nitrile reduction reaction known in biology. We describe here two crystal structures of Bacillus subtilis QueF, one of the wild-type enzyme in complex with the substrate preQ0, trapped as a covalent thioimide, a putative intermediate in the reaction, and the second of the C55A mutant in complex with the substrate preQ0 bound noncovalently. The QueF enzyme forms an asymmetric tunnel-fold homodecamer of two head-to-head facing pentameric subunits, harboring 10 active sites at the intersubunit interfaces. In both structures, a preQ0 molecule is bound at eight sites, and in the wild-type enzyme, it forms a thioimide covalent linkage to the catalytic residue Cys-55. Both structural and transient kinetic data show that preQ0 binding, not thioimide formation, induces a large conformational change in and closure of the active site. Based on these data, we propose a mechanism for the activation of the Cys-55 nucleophile and subsequent hydride transfer. PMID:22787148

Reaction of nitriles intercalation in tantalum pentachloride complexes with amines

International Nuclear Information System (INIS)

Glushkova, M.A.; Chumaevskij, N.A.; Khmelevskaya, L.V.; Ershova, M.M.; Buslaev, Yu.A.

1987-01-01

Data on the study of aceto-, propio- and benzonitrile intercalation in TaCl 5 complexes with diethyl- and triethylamines in CCl 4 solution are discussed. Using the methods of IR and Raman spectroscopy it has been established that it is the nature of ligand, and not nitrile intercalated in the complex, that affects greatly the composition of final products. In contrast to acetonitrile, intercalation in the complex of propio- and benzonitriles is observed already at room temperature. On the basis of spectral data a supposition is made that carbon tetrachloride used as a solvent accelerates the reaction of nitrile intercalation and promotes their deprotonation in the presence of aprotonic amine

Degradation of the metal-cyano complex tetracyanonickelate (II) by Fusarium oxysporum N-10.

Science.gov (United States)

Yanase, H; Sakamoto, A; Okamoto, K; Kita, K; Sato, Y

2000-03-01

A fungus with the ability to utilize a metalcyano compound, tetracyanonickelate (II) ¿K2[Ni (CN)4]; TCN¿, as its sole source of nitrogen was isolated from soil and identified as Fusarium oxysporum N-10. Both intact mycelia and cell-free extract of the strain catalyzed hydrolysis of TCN to formate and ammonia and produced formamide as an intermediate, thereby indicating that a hydratase and an amidase sequentially participated in the degradation of TCN. The enzyme catalyzing the hydration of TCN was purified approximately ten-fold from the cell-free extract of strain N-10 with a yield of 29%. The molecular mass of the active enzyme was estimated to be 160 kDa. The enzyme appears to exist as a homotetramer, each subunit having a molecular mass of 40 kDa. The enzyme also catalyzed the hydration of KCN, with a cyanide-hydrating activity 2 x 10(4) times greater than for TCN. The kinetic parameters for TCN and KCN indicated that hydratase isolated from F. oxysporum was a cyanide hydratase able to utilize a broad range of cyano compounds and nitriles as substrates.

An update of nitrile photochemistry on Titan

Science.gov (United States)

Yung, Yuk L.

1987-01-01

Comparisons are undertaken between laboratory kinetics experiments and Voyager observations in order to shed light on possible chemical reaction pathways to the generation of cyanogen and dicyanoacetylene in Titan's upper atmosphere. The predicted concentrations of the simple nitrile compounds are found to be of a magnitude realistically corresponding to the Voyager observations.

Nitrile functionalized halloysite nanotubes/poly(arylene ether nitrile) nanocomposites: Interface control, characterization, and improved properties

International Nuclear Information System (INIS)

Wan, Xinyi; Zhan, Yingqing; Zeng, Guangyong; He, Yi

2017-01-01

Highlights: • Novel nitrile functionalized HNTs were realized through the covalent bonding. • Then modified HNTs showed good dispersion and interfacial adhesion with PEN. • The modified HNTs exhibited excellent reinforcement effect on PEN. • The chemical crosslinking between HNTs and PEN further enhanced the performance of nanocomposites. - Abstract: To develop high-performance halloysite nanotube (HNT)-based nanocomposites, the two key issues need to be considered: precise interface control and the dispersal of HNTs. This study presents an efficient way to functionalize halloysite nanotubes with 3-aminophenoxy-phthalonitrile, followed by compounding with poly(arylene ether nitrile) (PEN), to prepare functional nanocomposite films. The surface functionalization of HNTs was characterized and confirmed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with neat PEN, the tensile strength and modulus of the resulting PEN nanocomposites with 3 wt% functionalized HNTs were found to increase by 25.7% and 20.7%, respectively. The good dispersion and high capacitance of the dielectric layer resulted in PEN/HNTs nancomposites with enhanced dielectric permittivity and relatively low dielectric loss. Moreover, the addition of functional HNTs greatly improved the thermal stability of PEN, which could be further enhanced through the chemical cross-linking reaction between the functional HNTs and the PEN matrix. This work provides a new path toward obtaining advanced polymer-based nanocomposites with functional properties.

Nitrile functionalized halloysite nanotubes/poly(arylene ether nitrile) nanocomposites: Interface control, characterization, and improved properties

Energy Technology Data Exchange (ETDEWEB)

Wan, Xinyi [School of Chemistry and Chemical Engineering, Southwest Petroleum University, 8 Xindu Avenue, Chengdu, Sichuan, 610500 (China); Zhan, Yingqing, E-mail: 201599010032@swpu.edu.cn [School of Chemistry and Chemical Engineering, Southwest Petroleum University, 8 Xindu Avenue, Chengdu, Sichuan, 610500 (China); Oil & Gas Field Applied Chemistry Key Laboratory of Sichuan Province, Southwest Petroleum University, Chengdu, Sichuan, China, 610500 (China); Zeng, Guangyong [School of Chemistry and Chemical Engineering, Southwest Petroleum University, 8 Xindu Avenue, Chengdu, Sichuan, 610500 (China); He, Yi, E-mail: heyi007@163.com [School of Chemistry and Chemical Engineering, Southwest Petroleum University, 8 Xindu Avenue, Chengdu, Sichuan, 610500 (China); Oil & Gas Field Applied Chemistry Key Laboratory of Sichuan Province, Southwest Petroleum University, Chengdu, Sichuan, China, 610500 (China); State Key Lab of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, 8Xindu Avenue, Chengdu, Sichuan, 610500 (China)

2017-01-30

Highlights: • Novel nitrile functionalized HNTs were realized through the covalent bonding. • Then modified HNTs showed good dispersion and interfacial adhesion with PEN. • The modified HNTs exhibited excellent reinforcement effect on PEN. • The chemical crosslinking between HNTs and PEN further enhanced the performance of nanocomposites. - Abstract: To develop high-performance halloysite nanotube (HNT)-based nanocomposites, the two key issues need to be considered: precise interface control and the dispersal of HNTs. This study presents an efficient way to functionalize halloysite nanotubes with 3-aminophenoxy-phthalonitrile, followed by compounding with poly(arylene ether nitrile) (PEN), to prepare functional nanocomposite films. The surface functionalization of HNTs was characterized and confirmed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with neat PEN, the tensile strength and modulus of the resulting PEN nanocomposites with 3 wt% functionalized HNTs were found to increase by 25.7% and 20.7%, respectively. The good dispersion and high capacitance of the dielectric layer resulted in PEN/HNTs nancomposites with enhanced dielectric permittivity and relatively low dielectric loss. Moreover, the addition of functional HNTs greatly improved the thermal stability of PEN, which could be further enhanced through the chemical cross-linking reaction between the functional HNTs and the PEN matrix. This work provides a new path toward obtaining advanced polymer-based nanocomposites with functional properties.

Direct approaches to nitriles via highly efficient nitrogenation strategy through C-H or C-C bond cleavage.

Science.gov (United States)

Wang, Teng; Jiao, Ning

2014-04-15

Because of the importance of nitrogen-containing compounds in chemistry and biology, organic chemists have long focused on the development of novel methodologies for their synthesis. For example, nitrogen-containing compounds show up within functional materials, as top-selling drugs, and as bioactive molecules. To synthesize these compounds in a green and sustainable way, researchers have focused on the direct functionalization of hydrocarbons via C-H or C-C bond cleavage. Although researchers have made significant progress in the direct functionalization of simple hydrocarbons, direct C-N bond formation via C-H or C-C bond cleavage remains challenging, in part because of the unstable character of some N-nucleophiles under oxidative conditions. The nitriles are versatile building blocks and precursors in organic synthesis. Recently, chemists have achieved the direct C-H cyanation with toxic cyanide salts in the presence of stoichiometric metal oxidants. In this Account, we describe recent progress made by our group in nitrile synthesis. C-H or C-C bond cleavage is a key process in our strategy, and azides or DMF serve as the nitrogen source. In these reactions, we successfully realized direct nitrile synthesis using a variety of hydrocarbon groups as nitrile precursors, including methyl, alkenyl, and alkynyl groups. We could carry out C(sp(3))-H functionalization on benzylic, allylic, and propargylic C-H bonds to produce diverse valuable synthetic nitriles. Mild oxidation of C═C double-bonds and C≡C triple-bonds also produced nitriles. The incorporation of nitrogen within the carbon skeleton typically involved the participation of azide reagents. Although some mechanistic details remain unclear, studies of these nitrogenation reactions implicate the involvement of a cation or radical intermediate, and an oxidative rearrangement of azide intermediate produced the nitrile. We also explored environmentally friendly oxidants, such as molecular oxygen, to make our

Permeation of aromatic solvent mixtures through nitrile protective gloves.

Science.gov (United States)

Chao, Keh-Ping; Hsu, Ya-Ping; Chen, Su-Yi

2008-05-30

The permeation of binary and ternary mixtures of benzene, toluene, ethyl benzene and p-xylene through nitrile gloves were investigated using the ASTM F739 test cell. The more slowly permeating component of a mixture was accelerated to have a shorter breakthrough time than its pure form. The larger differences in solubility parameter between a solvent mixture and glove resulted in a lower permeation rate. Solubility parameter theory provides a potential approach to interpret the changes of permeation properties for BTEX mixtures through nitrile gloves. Using a one-dimensional diffusion model based on Fick's law, the permeation concentrations of ASTM F739 experiments were appropriately simulated by the estimated diffusion coefficient and solubility. This study will be a fundamental work for the risk assessment of the potential dermal exposure of workers wearing protective gloves.

Positron annihilation studies on proton irradiated nitrile rubber

International Nuclear Information System (INIS)

Ravi Chandran, T.S.G.; Lobo, Blaise; Ranganath, M.R.; Gopal, S.; Sreeramalu, V.

1996-01-01

NBR (Nitrile Butadiene Rubber) was irradiated with 4 MeV proton beam from a variable energy cyclotron (VEC) at VEC Centre, Calcutta, to a flux of 10 16 ions/cm 2 , in a vacuum of 10 -9 Torr and was studied through positron lifetime measurements

Vapour pressures and enthalpies of vapourization of a series of the linear aliphatic nitriles

International Nuclear Information System (INIS)

Emel'yanenko, Vladimir N.; Verevkin, Sergey P.; Koutek, Bohumir; Doubsky, Jan

2005-01-01

Vapour pressures and the molar enthalpies of vapourization ΔlgHm-bar of the linear aliphatic nitriles C 7 -C 17 have been determined by the transpiration method. Kovat's indices of these compounds were measured by capillary gas-chromatography. A linear correlation of enthalpies of vapourization ΔlgHm-bar at T=298.15 K of the nitriles studied with the Kovats indices has been found

Metal-Free Oxidation of Primary Amines to Nitriles through Coupled Catalytic Cycles.

Science.gov (United States)

Lambert, Kyle M; Bobbitt, James M; Eldirany, Sherif A; Kissane, Liam E; Sheridan, Rose K; Stempel, Zachary D; Sternberg, Francis H; Bailey, William F

2016-04-04

Synergism among several intertwined catalytic cycles allows for selective, room temperature oxidation of primary amines to the corresponding nitriles in 85-98% isolated yield. This metal-free, scalable, operationally simple method employs a catalytic quantity of 4-acetamido-TEMPO (ACT; TEMPO=2,2,6,6-tetramethylpiperidine N-oxide) radical and the inexpensive, environmentally benign triple salt oxone as the terminal oxidant under mild conditions. Simple filtration of the reaction mixture through silica gel affords pure nitrile products. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Mass spectrometric analysis of EPO IEF-PAGE interfering substances in nitrile examination gloves.

Science.gov (United States)

Reichel, Christian

2012-10-01

Direct detection of doping with recombinant erythropoietins (rhEPO) is accomplished by isoelectric focusing (IEF) or sodium dodecylsulfate (SDS) polyacrylamide gel electrophoresis (PAGE). In a recent publication, Lasne et al. (Electrophoresis 2011, 32, 1444) showed that improper use of nitrile examination gloves during sample collection, sample preparation, and IEF-PAGE may lead to distorted or absent EPO IEF-profiles. In order to clarify which substances are responsible for this observation, a mass spectrometric study on water extractable compounds found in nitrile gloves was performed. Several substance classes were shown to be present, among them polyethylene glycols (PEG), anionic and nonionic surfactants, as well as alcohol ethoxylates and plasticizers. It could be demonstrated that alkylbenzenesulfonates, the main category of detectable anionic detergents, and among them sodium dodecylbenzenesulfonate (SDBS) and its homologs, are the prime reason for the interference of nitrile gloves with EPO IEF-PAGE. Copyright © 2012 John Wiley & Sons, Ltd.

Anti-Inflammatory and Antioxidant Effects of Repeated Exposure to Cruciferous Allyl Nitrile in Sensitizer-Induced Ear Edema in Mice.

Science.gov (United States)

Tanii, Hideji; Sugitani, Kayo; Saijoh, Kiyofumi

2016-02-29

Skin sensitizers induce allergic reactions through the induction of reactive oxygen species. Allyl nitrile from cruciferous vegetables has been reported to induce antioxidants and phase II detoxification enzymes in various tissues. We assessed the effects of repeated exposure to allyl nitrile on sensitizer-induced allergic reactions. Mice were dosed with allyl nitrile (0-200 µmol/kg), and then received a dermal application of 1 of 3 sensitizers on the left ear or 1 of 2 vehicles on the right ear. Quantitative assessment of edema was carried out by measuring the difference in weight between the portions taken from the right and left ears. We tested enzymes (superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx), and thiobarbituric acid reactive substances (TBARS) in ears. Repeated exposure to allyl nitrile reduced edemas induced by glutaraldehyde and by 2, 4-dinitrochlorobenzene (DNCB), but not by formaldehyde. The repeated exposure decreased levels of TBARS, a marker of oxidative stress, induced by glutaraldehyde and by DNCB, but not by formaldehyde. Allyl nitrile elevated SOD levels for the 3 sensitizers, and CAT levels for formaldehyde and DNCB. Allyl nitrile also increased GPx levels for formaldehyde and DNCB, but not for glutaraldehyde. The reduced edemas were associated with changes in oxidative stress levels and antioxidant enzymes. Repeated exposure to allyl nitrile reduced allergic reactions induced by glutaraldehyde and by DNCB, but not by formaldehyde. This reduction was associated with changes in ROS levels and antioxidant enzyme activities.

a Look at Nitrile Chemistry in SGR B2(N) Using the Combined Power of the GBT and the VLA

Science.gov (United States)

Steber, Amanda; Zaleski, Daniel P.; Seifert, Nathan A.; Neill, Justin; Muckle, Matt; Pate, Brooks; Corby, Joanna F.; Remijan, Anthony

2014-06-01

Nitriles form the most prolific family of molecules known in the ISM, and laboratory work shows that radical-driven chemistry can account for the formation of a diverse set of nitrile and imine molecules. Broadband reaction screening of nitrile chemistry in a pulsed discharge nozzle coupled to a chirped-pulse Fourier transform rotational spectrometer has enabled detections of several new interstellar species including E- and Z-ethanimine and E-cyanomethanimine. The detections were made by direct comparisons of laboratory broadband rotational spectra with the Robert C. Byrd Green Bank Telescope (GBT) PRebiotic Interstellar MOlecule Survery (PRIMOS) survey towards Sgr B2(N), the most chemically complex interstellar region known. In order to probe nitrile chemistry in Sgr B2, we targeted low energy rotational transitions in the 18-21 GHz range of several nitriles with the Karl G. Jansky Very Large Array (VLA) at ˜1 arcsecond resolution. The data indicate that most nitriles and nitrile derivatives are co-spatial with shell shaped continuum features thought to be expanding ionization fronts. The CH2CN radical and imine species in particular are NOT associated with the hot core known as the "Large Molecule Heimat", where most large organic molecules are thought to reside. This result suggests radical driven nitrile chemistry may be promoted by near-UV radiation in moderate density regions of molecular clouds, and the data will be useful for evaluating possible formation mechanisms. R.A. Loomis et al. Ap. J. L., 765, (L9), 2013. D.P. Zaleski et al. Ap. J. L., 765, (L10), 2013.

Synthesis of Quinolines through Three-Component Cascade Annulation of Aryl Diazonium Salts, Nitriles, and Alkynes.

Science.gov (United States)

Wang, Hao; Xu, Qian; Shen, Sheng; Yu, Shouyun

2017-01-06

An efficient and rapid synthesis of multiply substituted quinolines is described. This method is enabled by a three-component cascade annulation of readily available aryl diazonium salts, nitriles, and alkynes. This reaction is catalyst- and additive-free. Various aryl diazonium salts, nitriles, and alkynes can participate in this transformation, and the yields are up to 83%.

Purification and characterization of acetylene hydratase of Pelobacter acetylenicus, a tungsten iron-sulfur protein.

Science.gov (United States)

Rosner, B M; Schink, B

1995-10-01

Acetylene hydratase of the mesophilic fermenting bacterium Pelobacter acetylenicus catalyzes the hydration of acetylene to acetaldehyde. Growth of P. acetylenicus with acetylene and specific acetylene hydratase activity depended on tungstate or, to a lower degree, molybdate supply in the medium. The specific enzyme activity in cell extract was highest after growth in the presence of tungstate. Enzyme activity was stable even after prolonged storage of the cell extract or of the purified protein under air. However, enzyme activity could be measured only in the presence of a strong reducing agent such as titanium(III) citrate or dithionite. The enzyme was purified 240-fold by ammonium sulfate precipitation, anion-exchange chromatography, size exclusion chromatography, and a second anion-exchange chromatography step, with a yield of 36%. The protein was a monomer with an apparent molecular mass of 73 kDa, as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The isoelectric point was at pH 4.2. Per mol of enzyme, 4.8 mol of iron, 3.9 mol of acid-labile sulfur, and 0.4 mol of tungsten, but no molybdenum, were detected. The Km for acetylene as assayed in a coupled photometric test with yeast alcohol dehydrogenase and NADH was 14 microM, and the Vmax was 69 mumol.min-1.mg of protein-1. The optimum temperature for activity was 50 degrees C, and the apparent pH optimum was 6.0 to 6.5. The N-terminal amino acid sequence gave no indication of resemblance to any enzyme protein described so far.

Degradation of blending vulcanized natural rubber and nitril rubber (NR/NBR) by dimethyl ether through variation of elastomer ratio

Science.gov (United States)

Saputra, A. H.; Juneva, S.; Sari, T. I.; Cifriadi, A.

2018-04-01

Dimethyl ether can cause degradation of the rubber material seal in some applications. In order to use of natural rubber in industry, research about a blending of natural rubber (NR) and nitrile rubber (NBR) to produce rubber to meet the standard seal material application were conducted. This study will observe the degradation mechanisms that occur in the blending natural rubber and nitrile rubber (NR/NBR) by dimethyl ether. Nitrile rubber types used in this study is medium quality nitrile rubber with 33% of acrylonitrile content (NBR33). The observed parameters are percent change in mass, mechanical properties and surface morphology. This study is limited to see the effect of variation vulcanized blending ratio (NR/NBR33) against to swelling. The increase of nitrile rubber (NBR33) ratio of blending rubber vulcanized can reduce the tensile strength and elongation. The best elastomer variation was obtained after comparing with the standard feasibility material of seal is rubber vulcanized blending (NR/NBR33) with ratio 40:60 NR: NBR.

Deuterium labelling studies with unsaturated acids and nitriles

International Nuclear Information System (INIS)

Desai, U.V.; Mane, R.B.

1986-01-01

α-Deuteriated α,β-unsaturated acids have been prepared by Knoevenagel condensation of aldehydes with deuteriated malonic acid. The decarboxylation of α,β-unsaturated cyano acid with pyridine/D 2 O yields α- and γ-labelled nitriles. The deuterium incorporation is studied by pmr spectroscopy. (author). 8 refs

Infrared Spectra and Optical Constants of Nitrile Ices Relevant to Titan's Atmosphere

Science.gov (United States)

Anderson, Carrie; Ferrante, Robert F.; Moore, W. James; Hudson, Reggie; Moore, Marla H.

2011-01-01

Spectra and optical constants of nitrile ices known or suspected to be in Titan?s atmosphere have been determined from 2.0 to 333.3 microns (approx.5000 to 30/cm). These results are relevant to the ongoing modeling of Cassini CIRS observations of Titan?s winter pole. Ices studied were: HCN, hydrogen cyanide; C2N2, cyanogen; CH3CN, acetonitrile; C2H5CN, propionitrile; and HC3N, cyanoacetylene. Optical constants were calculated, using Kramers-Kronig analysis, for each nitrile ice?s spectrum measured at a variety of temperatures, in both the amorphous- and crystalline phases. Spectra were also measured for many of the nitriles after quenching at the annealing temperature and compared with those of annealed ices. For each of these molecules we also measured the real component, n, of the refractive index for amorphous and crystalline phases at 670 nm. Several examples of the information contained in these new data sets and their usefulness in modeling Titan?s observed features will be presented (e.g., the broad emission feature at 160/cm; Anderson and Samuelson, 2011).

An Efficient Synthesis of Nitriles from Aldoximes Using Diethyl Phosphorocyanidate under Mild Conditions

International Nuclear Information System (INIS)

Lee, Kieseung; An, Hyeonseong; Hwang, Chanyeon

2012-01-01

Nitriles are valuable intermediates in organic synthesis not only because they serve as the appropriate precursors to various functional groups, but also because they are widely used as the key intermediates for pharmaceuticals, agrochemicals and various N-heterocyclic compounds. The cyano group itself is also frequently found in many biologically important molecules. Therefore, a variety of synthetic routes to nitriles from diverse chemical precursors have been developed. Among these routes, nitrile synthesis from aldoximes using an appropriate dehydrating agent has been a general and clean method. For this purpose, numerous reagents such as chlorosulfonyl isocyanate, di-2-pyridyl sulfite, Burgess reagent, [RuCl 2 (p-cymene)] 2 /MS, 4A, BOP, Pd(OAc) 2 /PPh 3 , Cu(OAc) 2 /ultrasound have been developed. These reagents, however, may have limitations in some respects such as harsh reaction conditions, use of expensive or less readily available reagents, low yields, and lack of generality. Therefore, there is still a need to develop mild and general method for this conversion. Diethyl phosphorocyanidate (DEPC) was initially introduced as an efficient peptide coupling reagent, and has been utilized for useful organic reactions. Previously, we reported that 2-chloro-1-methylpyridinium iodide is an efficient and mild reagent for the dehydration of aldoximes to nitriles under mild conditions. In continuation of our interest in developing mild method for the conversion of aldoximes to nitriles, we herein wish to report the first application of DEPC to the efficient synthesis of nitriles from aldoximes under mild conditions (Scheme 1). In order to obtain the information regarding the optimum reaction conditions, 4-pyridine aldoxime (1a) was reacted with DEPC without base, and in presence of various base in CH 2 Cl 2 at rt for a prolonged reaction time (20 h) (Table 1). CH 2 CI 2 was chosen as reaction medium in this reaction due to the good solubility for both 1 and 3 in CH

Ribonuclease S dynamics measured using a nitrile label with 2D IR vibrational echo spectroscopy.

Science.gov (United States)

Bagchi, Sayan; Boxer, Steven G; Fayer, Michael D

2012-04-05

A nitrile-labeled amino acid, p-cyanophenylalanine, is introduced near the active site of the semisynthetic enzyme ribonuclease S to serve as a probe of protein dynamics and fluctuations. Ribonuclease S is the limited proteolysis product of subtilisin acting on ribonuclease A, and consists of a small fragment including amino acids 1-20, the S-peptide, and a larger fragment including residues 21-124, the S-protein. A series of two-dimensional vibrational echo experiments performed on the nitrile-labeled S-peptide and the RNase S are described. The time-dependent changes in the two-dimensional infrared vibrational echo line shapes are analyzed using the center line slope method to obtain the frequency-frequency correlation function (FFCF). The observations show that the nitrile probe in the S-peptide has dynamics that are similar to, but faster than, those of the single amino acid p-cyanophenylalanine in water. In contrast, the dynamics of the nitrile label when the peptide is bound to form ribonuclease S are dominated by homogeneous dephasing (motionally narrowed) contributions with only a small contribution from very fast inhomogeneous structural dynamics. The results provide insights into the nature of the structural dynamics of the ribonuclease S complex. The equilibrium dynamics of the nitrile labeled S-peptide and the ribonuclease S complex are also investigated by molecular dynamics simulations. The experimentally determined FFCFs are compared to the FFCFs obtained from the molecular dynamics simulations, thereby testing the capacity of simulations to determine the amplitudes and time scales of protein structural fluctuations on fast time scales under thermal equilibrium conditions.

Unraveling the reaction mechanism on nitrile hydration catalyzed by [Pd(OH2)4]2+: insights from theory.

Science.gov (United States)

Tílvez, Elkin; Menéndez, María I; López, Ramón

2013-07-01

Density functional theory methodologies combined with continuum and discrete-continuum descriptions of solvent effects were used to investigate the [Pd(OH2)4](2+)-catalyzed acrylonitrile hydration to yield acrylamide. According to our results, the intramolecular hydroxide attack mechanism and the external addition mechanism of a water molecule with rate-determining Gibbs energy barriers in water solution of 27.6 and 28.3 kcal/mol, respectively, are the most favored. The experimental kinetic constants of the hydration started by hydroxide, k(OH), and water, k(H2O), attacks for the cis-[Pd(en)(OH2)2](2+)-catalyzed dichloroacetonitrile hydration rendered Gibbs energy barriers whose energy difference, 0.7 kcal/mol, is the same as that obtained in the present study. Our investigation reveals the nonexistence of the internal attack of a water ligand for Pd-catalyzed nitrile hydration. At the low pHs used experimentally, the equilibrium between [Pd(OH2)3(nitrile)](2+) and [Pd(OH2)2(OH)(nitrile)](+) is completely displaced to [Pd(OH2)3(nitrile)](2+). Experimental studies in these conditions stated that water acts as a nucleophile, but they could not distinguish whether it was a water ligand, an external water molecule, or a combination of both possibilities. Our theoretical explorations clearly indicate that the external water mechanism becomes the only operative one at low pHs. On the basis of this mechanistic proposal it is also possible to ascribe an (1)H NMR signal experimentally detected to the presence of a unidentate iminol intermediate and to explain the influence of nitrile concentration reported experimentally for nitriles other than acrylonitrile in the presence of aqua-Pd(II) complexes. Therefore, our theoretical point of view on the mechanism of nitrile hydration catalyzed by aqua-Pd(II) complexes can shed light on these relevant processes at a molecular level as well as afford valuable information that can help in designing new catalysts in milder and more

The Reduction of Nitriles to Aldehydes: Applications of Raney Nickel ...

African Journals Online (AJOL)

NJD

The selective reduction of a nitrile to an aldehyde, especially when the substrate ..... prelude to reductive amination chemistry was thwarted by a rapid aldol ... and allowed the direct incorporation of the α-methylbenzylamine chiral auxiliary.

Substituent effects on mono-substituted and poly-substituted nitriles; Efeitos dos substituintes em nitrilas mono- e polissubstituidas

Energy Technology Data Exchange (ETDEWEB)

Sofia, Raquel C.R.; Carneiro, Paulo I.B.; Rittner, Roberto [Universidade Estadual de Campinas, SP (Brazil). Inst. de Quimica; Fabi, Marino T [Rhodia S.A., Sao Paulo, SP (Brazil)

1992-12-31

This work studies various mono substituted aliphatic nitriles, Y C H{sub 2} (Y=H, F, Cl, Br, I, OMe, S Me, SEt{sub 2}, Me and Ph), and some reference nitriles (Y=Et, n-Pr, n-Bu, n-Am, n-Hex and n-Hept) 12 refs., 3 tabs.

Biocatalytic Synthesis of Nitriles through Dehydration of Aldoximes: The Substrate Scope of Aldoxime Dehydratases.

Science.gov (United States)

Betke, Tobias; Higuchi, Jun; Rommelmann, Philipp; Oike, Keiko; Nomura, Taiji; Kato, Yasuo; Asano, Yasuhisa; Gröger, Harald

2018-04-16

Nitriles, which are mostly needed and produced by the chemical industry, play a major role in various industry segments, ranging from high-volume, low-price sectors, such as polymers, to low-volume, high-price sectors, such as chiral pharma drugs. A common industrial technology for nitrile production is ammoxidation as a gas-phase reaction at high temperature. Further popular approaches are substitution or addition reactions with hydrogen cyanide or derivatives thereof. A major drawback, however, is the very high toxicity of cyanide. Recently, as a synthetic alternative, a novel enzymatic approach towards nitriles has been developed with aldoxime dehydratases, which are capable of converting an aldoxime in one step through dehydration into nitriles. Because the aldoxime substrates are easily accessible, this route is of high interest for synthetic purposes. However, whenever a novel method is developed for organic synthesis, it raises the question of substrate scope as one of the key criteria for application as a "synthetic platform technology". Thus, the scope of this review is to give an overview of the current state of the substrate scope of this enzymatic method for synthesizing nitriles with aldoxime dehydratases. As a recently emerging enzyme class, a range of substrates has already been studied so far, comprising nonchiral and chiral aldoximes. This enzyme class of aldoxime dehydratases shows a broad substrate tolerance and accepts aliphatic and aromatic aldoximes, as well as arylaliphatic aldoximes. Furthermore, aldoximes with a stereogenic center are also recognized and high enantioselectivities are found for 2-arylpropylaldoximes, in particular. It is further noteworthy that the enantiopreference depends on the E and Z isomers. Thus, opposite enantiomers are accessible from the same racemic aldehyde and the same enzyme. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Metabolic reprogramming for producing energy and reducing power in fumarate hydratase null cells from hereditary leiomyomatosis renal cell carcinoma.

Directory of Open Access Journals (Sweden)

Youfeng Yang

Full Text Available Fumarate hydratase (FH-deficient kidney cancer undergoes metabolic remodeling, with changes in mitochondrial respiration, glucose, and glutamine metabolism. These changes represent multiple biochemical adaptations in glucose and fatty acid metabolism that supports malignant proliferation. However, the metabolic linkages between altered mitochondrial function, nucleotide biosynthesis and NADPH production required for proliferation and survival have not been elucidated. To characterize the alterations in glycolysis, the Krebs cycle and the pentose phosphate pathways (PPP that either generate NADPH (oxidative or do not (non-oxidative, we utilized [U-(13C]-glucose, [U-(13C,(15N]-glutamine, and [1,2- (13C2]-glucose tracers with mass spectrometry and NMR detection to track these pathways, and measured the oxygen consumption rate (OCR and extracellular acidification rate (ECAR of growing cell lines. This metabolic reprogramming in the FH null cells was compared to cells in which FH has been restored. The FH null cells showed a substantial metabolic reorganization of their intracellular metabolic fluxes to fulfill their high ATP demand, as observed by a high rate of glucose uptake, increased glucose turnover via glycolysis, high production of glucose-derived lactate, and low entry of glucose carbon into the Krebs cycle. Despite the truncation of the Krebs cycle associated with inactivation of fumarate hydratase, there was a small but persistent level of mitochondrial respiration, which was coupled to ATP production from oxidation of glutamine-derived α-ketoglutarate through to fumarate. [1,2- (13C2]-glucose tracer experiments demonstrated that the oxidative branch of PPP initiated by glucose-6-phosphate dehydrogenase activity is preferentially utilized for ribose production (56-66% that produces increased amounts of ribose necessary for growth and NADPH. Increased NADPH is required to drive reductive carboxylation of α-ketoglutarate and fatty acid

Determination of thermodynamic parameters of tautomerization in gas phase by mass spectrometry and DFT calculations: Keto-enol versus nitrile-ketenimine equilibria.

Science.gov (United States)

Giussi, Juan M; Gastaca, Belen; Albesa, Alberto; Cortizo, M Susana; Allegretti, Patricia E

2011-02-01

The study of tautomerics equilibria is really important because the reactivity of each compound with tautomeric capacity can be determined from the proportion of each tautomer. In the present work the tautomeric equilibria in some γ,δ-unsaturated β-hydroxynitriles and γ,δ-unsaturated β-ketonitriles were studied. The first family of compounds presents two possible theoretical tautomers, nitrile and ketenimine, while the second one presents four possible theoretical tautomers, keto-nitrile, enol (E and Z)-nitrile and keto-ketenimine. The equilibrium in gas phase was studied by gas chromatography-mass spectrometry (GC-MS). Tautomerization enthalpies were calculated by this methodology, and results were compared with those obtained by density functional theory (DFT) calculations, observing a good agreement between them. Nitrile tautomers were favored within the first family of compounds, while keto-nitrile tautomers were favored in the second family. Copyright © 2010 Elsevier B.V. All rights reserved.

Group 4 metallocene complexes with pendant nitrile groups

Czech Academy of Sciences Publication Activity Database

Pinkas, Jiří; Gyepes, R.; Kubišta, Jiří; Horáček, Michal; Lamač, Martin

2011-01-01

Roč. 696, 11-12 (2011), s. 2364-2372 ISSN 0022-328X R&D Projects: GA ČR GPP207/10/P200; GA MŠk(CZ) LC06070 Institutional research plan: CEZ:AV0Z40400503 Keywords : metallocene * group 4 elements * nitrile Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.384, year: 2011

Synthesis and microbial transformation of Beta-amino nitriles

Czech Academy of Sciences Publication Activity Database

Winkler, M.; Martínková, Ludmila; Knall, A. C.; Krahulec, S.; Klempier, N.

2005-01-01

Roč. 61, - (2005), s. 4249-4260 ISSN 0040-4020 R&D Projects: GA ČR GA203/05/2267; GA MŠk OC D25.001 Grant - others:COST D25/0002/02 Institutional research plan: CEZ:AV0Z50200510 Keywords : microbial nitrile hydrolysis * enantioselectivity Subject RIV: EE - Microbiology, Virology Impact factor: 2.610, year: 2005

Study of glucoamylase immobilization in butadiene nitrile latex membrane

International Nuclear Information System (INIS)

Miller, E.

1992-01-01

Attempts have been undetaken to immobilize glucoamylaze by means of butadiene nitrile latex in the presence of a chemical initiator and 60 Co γ-radiation. The activity, stability of conjugates in the membrane and permeability of oxygen in these membranes were determined. (author) 14 refs.; 5 figs

Calculation of vibrational shifts of nitrile probes in the active site of ketosteroid isomerase upon ligand binding.

Science.gov (United States)

Layfield, Joshua P; Hammes-Schiffer, Sharon

2013-01-16

The vibrational Stark effect provides insight into the roles of hydrogen bonding, electrostatics, and conformational motions in enzyme catalysis. In a recent application of this approach to the enzyme ketosteroid isomerase (KSI), thiocyanate probes were introduced in site-specific positions throughout the active site. This paper implements a quantum mechanical/molecular mechanical (QM/MM) approach for calculating the vibrational shifts of nitrile (CN) probes in proteins. This methodology is shown to reproduce the experimentally measured vibrational shifts upon binding of the intermediate analogue equilinen to KSI for two different nitrile probe positions. Analysis of the molecular dynamics simulations provides atomistic insight into the roles that key residues play in determining the electrostatic environment and hydrogen-bonding interactions experienced by the nitrile probe. For the M116C-CN probe, equilinen binding reorients an active-site water molecule that is directly hydrogen-bonded to the nitrile probe, resulting in a more linear C≡N--H angle and increasing the CN frequency upon binding. For the F86C-CN probe, equilinen binding orients the Asp103 residue, decreasing the hydrogen-bonding distance between the Asp103 backbone and the nitrile probe and slightly increasing the CN frequency. This QM/MM methodology is applicable to a wide range of biological systems and has the potential to assist in the elucidation of the fundamental principles underlying enzyme catalysis.

An Efficient Synthesis of Nitriles from Aldoximes Using Diethyl Phosphorocyanidate under Mild Conditions

Energy Technology Data Exchange (ETDEWEB)

Lee, Kieseung; An, Hyeonseong; Hwang, Chanyeon [Woosuk Univ.,Wanju (Korea, Republic of)

2012-10-15

Nitriles are valuable intermediates in organic synthesis not only because they serve as the appropriate precursors to various functional groups, but also because they are widely used as the key intermediates for pharmaceuticals, agrochemicals and various N-heterocyclic compounds. The cyano group itself is also frequently found in many biologically important molecules. Therefore, a variety of synthetic routes to nitriles from diverse chemical precursors have been developed. Among these routes, nitrile synthesis from aldoximes using an appropriate dehydrating agent has been a general and clean method. For this purpose, numerous reagents such as chlorosulfonyl isocyanate, di-2-pyridyl sulfite, Burgess reagent, [RuCl{sub 2}(p-cymene)]{sub 2}/MS, 4A, BOP, Pd(OAc){sub 2}/PPh{sub 3}, Cu(OAc){sub 2}/ultrasound have been developed. These reagents, however, may have limitations in some respects such as harsh reaction conditions, use of expensive or less readily available reagents, low yields, and lack of generality. Therefore, there is still a need to develop mild and general method for this conversion. Diethyl phosphorocyanidate (DEPC) was initially introduced as an efficient peptide coupling reagent, and has been utilized for useful organic reactions. Previously, we reported that 2-chloro-1-methylpyridinium iodide is an efficient and mild reagent for the dehydration of aldoximes to nitriles under mild conditions. In continuation of our interest in developing mild method for the conversion of aldoximes to nitriles, we herein wish to report the first application of DEPC to the efficient synthesis of nitriles from aldoximes under mild conditions (Scheme 1). In order to obtain the information regarding the optimum reaction conditions, 4-pyridine aldoxime (1a) was reacted with DEPC without base, and in presence of various base in CH{sub 2}Cl{sub 2} at rt for a prolonged reaction time (20 h) (Table 1). CH{sub 2}CI{sub 2} was chosen as reaction medium in this reaction due to the

Reactivity of the geminal phosphinoborane tBu2PCH2BPh2 towards alkynes, nitriles, and nitrilium triflates

NARCIS (Netherlands)

Habraken, E.R.M.; Mens, L.C.; Nieger, M.; Lutz, M.; Ehlers, A.W.; Slootweg, J.C.

2017-01-01

The reactivity of the geminal phosphinoborane tBu2PCH2BPh2 towards terminal alkynes, nitriles and nitrilium salts is investigated. Terminal alkynes react via C–H bond splitting (deprotonation) resulting in the formation of phosphonium borates. In contrast, both nitriles and nitrilium salts undergo

Palladium(II)-catalyzed desulfitative synthesis of aryl ketones from sodium arylsulfinates and nitriles: scope, limitations, and mechanistic studies.

Science.gov (United States)

Skillinghaug, Bobo; Sköld, Christian; Rydfjord, Jonas; Svensson, Fredrik; Behrends, Malte; Sävmarker, Jonas; Sjöberg, Per J R; Larhed, Mats

2014-12-19

A fast and efficient protocol for the palladium(II)-catalyzed production of aryl ketones from sodium arylsulfinates and various organic nitriles under controlled microwave irradiation has been developed. The wide scope of the reaction has been demonstrated by combining 14 sodium arylsulfinates and 21 nitriles to give 55 examples of aryl ketones. One additional example illustrated that, through the choice of the nitrile reactant, benzofurans are also accessible. The reaction mechanism was investigated by electrospray ionization mass spectrometry and DFT calculations. The desulfitative synthesis of aryl ketones from nitriles was also compared to the corresponding transformation starting from benzoic acids. Comparison of the energy profiles indicates that the free energy requirement for decarboxylation of 2,6-dimethoxybenzoic acid and especially benzoic acid is higher than the corresponding desulfitative process for generating the key aryl palladium intermediate. The palladium(II) intermediates detected by ESI-MS and the DFT calculations provide a detailed understanding of the catalytic cycle.

Theoretical study of the nucleophilic addition of oximes to the nitrile complexes trans-/cis-[ReCl4(NCCH3)2

International Nuclear Information System (INIS)

Klestova-Nadeeva, E. A.; Kuznetsov, M. L.; Dement'ev, A. I.

2005-01-01

The reaction of nucleophilic addition of oximes (HON=CRR 1 ) to organic nitriles coordinated in the rhenium complexes trans-/cis-[ReCl 4 (NCCH 3 ) 2 ] was theoretically studied by the Hartree-Fock and density functional theory (B3LYP) methods. The reaction mechanism involves (I) the initial change of the oxime conformation; (II) the formation of the orientation complex with the coordinated nitrile molecule, which transforms into a four-membered transition state; (III) the formation of the addition product in a less stable conformation; and (IV) the formation of the ultimate addition product. The calculations make it possible to interpret the activation of nitriles in terms of the activated complex theory as a result of stabilization of the transition state in going from the free to the coordinated nitrile [ru

Hydrolysis of nitriles by soil bacteria: variation with soil origin

CSIR Research Space (South Africa)

Rapheeha, OKL

2017-03-01

Full Text Available . To achieve this, we needed to compare the efficiency of isolation methods and determine the influence of land use and geographical origin of the soil sample. Nitrile-utilizing bacteria were isolated from various soil environments across a 1000 km long...

Unexpected nitrile formation in bio-based mesoporous materials (Starbons®).

Science.gov (United States)

Attard, Jennifer; Milescu, Roxana; Budarin, Vitaliy; Matharu, Avtar S; Clark, James H

2018-01-16

The bio-based mesoporous materials made from polysaccharides, Starbons® can be modified by two different routes to give high levels of N-content, unexpectedly including significant quantities of nitrile groups which can improve the materials performance in applications including metal capture.

Nitrile imines and nitrile ylides: rearrangements of benzonitrile N-methylimine and benzonitrile dimethylmethylide to azabutadienes, carbodiimides, and ketenimines. Chemical activation in thermolysis of azirenes, tetrazoles, oxazolones, isoxazolones, and oxadiazolones.

Science.gov (United States)

Bégué, Didier; Dargelos, Alain; Berstermann, Hans M; Netsch, Klaus P; Bednarek, Pawel; Wentrup, Curt

2014-02-07

Flash vacuum thermolysis (FVT) of 1-methyl-5-phenyltetrazole (5b), 2-methyl-5-phenyltetrazole (1b), and 3-methyl-5-phenyl-1,3,4-oxadiazol-2(3H)-one (3b) affords the nitrile imine (2b), which rearranges in part to N-methyl-N'-phenylcarbodiimide (7b). Another part of 2b undergoes a 1,4-H shift to the diazabutadiene (13). 13 undergoes two chemically activated decompositions, to benzonitrile and CH2═NH and to styrene and N2. FVT of 2,2-dimethyl-4-phenyl-oxazol-5(2H)-one (16) at 400 °C yields 3-methyl-1-phenyl-2-azabutadiene (18) in high yield. In contrast, FVT of 3,3-dimethyl-2-phenyl-1-azirene (21) at 600 °C or 4,4-dimethyl-3-phenyl-isoxazolone (20) at 600 °C affords only a low yield of azabutadiene (18) due to chemically activated decomposition of 18 to styrene and acetonitrile. There are two reaction paths from azirene (21): one (path a) leading to nitrile ylide (17) and the major products styrene and acetonitrile and the other (path b) leading to the vinylnitrene (22) and ketenimine (23). The nitrile ylide PhC(-)═N(+)═C(CH3)2 (17) is implicated as the immediate precursor of azabutadiene (18). FVT of either 3-phenylisoxazol-5(4H)one (25) or 2-phenylazirene (26) at 600 °C affords N-phenylketenimine (28). The nitrile ylide PhC(-)═N(+)═CH2 (30) is postulated as a reversibly formed intermediate. N-Phenylketenimine (28) undergoes chemically activated free radical rearrangement to benzyl cyanide. The mechanistic interpretations are supported by calculations of the energies of key intermediates and transition states.

Straightforward uranium-catalyzed dehydration of primary amides to nitriles

International Nuclear Information System (INIS)

Enthaler, Stephan

2011-01-01

The efficient uranium-catalyzed dehydration of a variety of primary amides, using N-methyl-N-(trimethylsilyl)trifluoroacetamide (MSTFA) as a dehydration reagent, to the corresponding nitriles has been investigated. With this catalyst system, extraordinary catalyst activities and selectivities were feasible. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Nitrile Probes of Electric Field Agree with Independently Measured Fields in Green Fluorescent Protein Even in the Presence of Hydrogen Bonding.

Science.gov (United States)

Slocum, Joshua D; Webb, Lauren J

2016-05-25

There is growing interest in using the nitrile vibrational oscillation as a site-specific probe of local environment to study dynamics, folding, and electrostatics in biological molecules such as proteins. Nitrile probes have been used extensively as reporters of electric field using vibrational Stark effect spectroscopy. However, the analysis of frequencies in terms of electric fields is potentially complicated by the large ground state dipole moment of the nitrile, which may irrevocably perturb the protein under investigation, and the ability of nitriles to accept hydrogen bonds, which causes frequency shifts that are not described by the Stark effect. The consequence of this is that vibrational spectroscopy of nitriles in biomolecules could be predominately sensitive to their local hydration status, not electrostatic environment, and have the potential to be particularly destabilizing to the protein. Here, we introduce green fluorescent protein (GFP) as a model system for addressing these concerns using biosynthetically incorporated p-cyanophenylalanine (pCNF) residues in the interior of GFP and measuring absorption energies of both the intrinsic GFP fluorophore and pCNF residues in response to a series of amino acid mutations. We show that observed changes in emission energy of GFP due to the mutations strongly correlate with changes in electric field experienced by both the nitrile probes and the intrinsic fluorophore. Additionally, we show that changes in electric field measured from the intrinsic fluorophore due to amino acid mutations are unperturbed by the addition of pCNF residues inserted nearby. Finally, we show that changes in electric field experienced by the vibrational probes trend monotonically with changes in field experienced by the native fluorophore even though the nitrile probe is engaged in moderate hydrogen bonding to nearby water molecules, indicated by the temperature dependence of the nitrile's absorption energy. Together these results

Hydrogenation of nitriles on a well-characterized nickel surface: From surface science studies to liquid phase catalytic activity measurements

Energy Technology Data Exchange (ETDEWEB)

Gardin, Denis Emmanuel [Univ. of California, Berkeley, CA (United States)

1993-12-01

Nitrile hydrogenation is the most commonly used method for preparing diverse amines. This thesis is aimed at the mechanism and factors affecting the performance of Ni-based catalysts in nitrile hydrogenations. Surface science techniques are used to study bonding of nitriles and amines to a Ni(111) surface and to identify surface intermediates. Liquid-phase hydrogenations of cyclohexene and 1-hexene on a Pt foil were carried out successfully. Finally, knowledge about the surface structure, surface chemical bond, dynamics of surface atoms (diffusion, growth), and reactivity of metal surfaces from solid-gas interface studies, is discussed.

Pengaruh Penggunaan Nitril Butadiene Rubber Dan Pale Crepe Pada Pembuatan Sol Karet Untuk Sepatu Pengaman

OpenAIRE

Yuniari, Arum

2010-01-01

Rubber sole for safety shoes was different on physical specification with general sole, especially on abrasion resistance and oil resistance. The objective of the study was to determine the effect of nitril butadiene rubber and pale crepe on physical properties of vulcanized rubber sole for safety shoes. Rubber sole for safety shoes was produced by blending pale crepe and nitril butadiene rubber with ratio of : 50/50; 60/40; 70/30 and 80/20 phr, respectively. Carbon black as filler was also v...

Pengaruh penggunaan nitril butadiene rubber dan pale crepe pada pembuatan sol karet untuk sepatu pengaman

OpenAIRE

Arum Yuniari

2010-01-01

Abstract Rubber sole for safety shoes was different on physical specification with general sole, especially on abrasion resistance and oil resistance. The objective of the study was to determine the effect of nitril butadiene rubber and pale crepe on physical properties of vulcanized rubber sole for safety shoes. Rubber sole for safety shoes was produced by blending pale crepe and nitril butadiene rubber with ratio of : 50/50; 60/40; 70/30 and 80/20 phr, respectively. Carbon black as fill...

Mechanical, thermal and friction properties of rice bran carbon/nitrile rubber composites: Influence of particle size and loading

International Nuclear Information System (INIS)

Li, Mei-Chun; Zhang, Yinhang; Cho, Ur Ryong

2014-01-01

Highlights: • A novel rice bran carbon (RBC) is used to reinforce nitrile rubber. • We study the effect of RBC particle size on the performances of nitrile rubber. • We study the effect of RBC loading on the performances of nitrile rubber. • The addition of RBC improves the mechanical properties of nitrile rubber. • The addition of RBC improves the anti-skid properties of nitrile rubber. - Abstract: Four types of rice bran carbon (RBC) with different particle sizes were compounded with nitrile rubber (NBR) in a laboratory size two-roll miller. The obtained RBC/NBR composites were characterized using Field Emission Scanning Electron Microscopy (FE-SEM) and tensile tests. Experimental results showed the RBC with lowest particle size exhibited best dispersion state and superior reinforcement ability. Then, we investigated the influence of RBC loading on the morphology, vulcanization characteristics, mechanical, thermal and friction properties of NBR composites. Experimental results indicated that the incorporation of RBC resulted in higher torque values, longer curing time, but shorter scorch time. The addition of RBC remarkably improved the mechanical properties of NBR composites. However, when the RBC loading exceeded 60 phr, the improvement in the tensile strength was not significant due to the poor dispersion state and weak interfacial bonding between RBC and NBR matrix, which were confirmed by Mooney–Rivlin stress–strain curves and FE-SEM observations. The thermal stabilities of RBC/NBR composites were largely improved as the loading of RBC increased. Friction tests revealed that under a certain concentration, the presence of RBC increased the static friction coefficient of NBR composites, suggesting the anti-skid role of RBC in the NBR composites. The overall results demonstrated that RBC could act as ideal filler for NBR composites providing both economic and environmental advantages

Mechanistic insights into the oxidative dehydrogenation of amines to nitriles in continuous flow

DEFF Research Database (Denmark)

Corker, Emily C.; Ruiz-Martínez, Javier; Riisager, Anders

2015-01-01

The oxidative dehydrogenation of various aliphatic amines to their corresponding nitrile compounds using RuO2/Al2O3 catalysts in air was successfully applied to a continuous flow reaction. Conversions of amines (up to >99%) and yields of nitriles (up to 77%) varied depending on reaction conditions...... and the amine utilised. The presence of water was found to be important for the activity and stability of the RuO2/Al2O3 catalyst. The Hammett relationship and in situ infrared spectroscopy were applied to divulge details about the catalytic mechanism of the oxidative dehydrogenation of amines over RuO2/Al2O3...

Solvation structure determination of nickel(II) ion in six nitriles using extended X-ray absorption fine structure spectroscopy

International Nuclear Information System (INIS)

Inada, Yasuhiro; Funahashi, Shigenobu

1997-01-01

The solvation structures of the nickel(II) ion in six nitriles have been determined using X-ray absorption fine structure spectroscopy. The coordination number and the Ni-N bond length are 6 and 206.9 ± 0.6 pm in acetonitrile, 5.9 ± 0.2 and 206.9 ± 0.6 pm in propionitrile, 6.0 ± 0.2 and 206.8 ± 0.6 pm in butyronitrile, 6.0 ± 0.2 and 206.8 ± 0.6 pm in isobutyronitrile, 6.0 ± 0.2 and 206.8 ± 0.6 pm in valeronitrile, and 6.0 ± 0.2 and 206.5 ± 0.7 pm in benzonitrile, respectively. The structure parameters around the nickel(II) ion in all the nitriles are not affected by the bulkiness of the nitrile molecules. On the basis of the obtained structure parameters, we have discussed the structural characteristics around the nickel(II) ion with nitrogen and oxygen donor solvents and the reaction mechanisms for nitrile exchange on the nickel(II) ion. (author)

Molecular Pathways: Fumarate Hydratase-Deficient Kidney Cancer: Targeting the Warburg Effect in Cancer

Science.gov (United States)

Linehan, W. Marston; Rouault, Tracey A.

2015-01-01

Hereditary leiomyomatosis and renal cell carcinoma (HLRCC) is a hereditary cancer syndrome in which affected individuals are at risk for development of cutaneous and uterine leiomyomas and an aggressive form of type II papillary kidney cancer. HLRCC is characterized by germline mutation of the tricarboxylic acid cycle (TCA) enzyme, fumarate hydratase (FH). FH-deficient kidney cancer is characterized by impaired oxidative phosphorylation and a metabolic shift to aerobic glycolysis, a form of metabolic reprogramming referred to as the Warburg effect. Increased glycolysis generates ATP needed for increased cell proliferation. In FH-deficient kidney cancer levels of AMPK, a cellular energy sensor, are decreased; resulting in diminished p53 levels, decreased expression of the iron importer, DMT1, leading to low cellular iron levels, and to enhanced fatty acid synthesis by diminishing phosphorylation of acetyl CoA carboxylase, a rate limiting step for fatty acid synthesis. Increased fumarate and decreased iron levels in FH-deficient kidney cancer cells inactivate prolyl hydroxylases, leading to stabilization of HIF1α, and increased expression of genes such as vascular endothelial growth factor (VEGF) and GLUT1 to provide fuel needed for rapid growth demands. Several therapeutic approaches for targeting the metabolic basis of FH-deficient kidney cancer are under development or are being evaluated in clinical trials, including the use of agents such as metformin, which would reverse the inactivation of AMPK, approaches to inhibit glucose transport, LDH-A, the anti-oxidant response pathway, the heme oxygenase pathway and approaches to target the tumor vasculature and glucose transport with agents such as bevacizumab and erlotinib. These same types of metabolic shifts, to aerobic glycolysis with decreased oxidative phosphorylation, have been found in a wide variety of other cancer types. Targeting the metabolic basis of a rare cancer such as fumarate hydratase

Lethal neonatal case and review of primary short-chain enoyl-CoA hydratase (SCEH) deficiency associated with secondary lymphocyte pyruvate dehydrogenase complex (PDC) deficiency

NARCIS (Netherlands)

Bedoyan, Jirair K.; Yang, Samuel P.; Ferdinandusse, Sacha; Jack, Rhona M.; Miron, Alexander; Grahame, George; DeBrosse, Suzanne D.; Hoppel, Charles L.; Kerr, Douglas S.; Wanders, Ronald J. A.

2017-01-01

Mutations in ECHS1 result in short-chain enoyl-CoA hydratase (SCEH) deficiency which mainly affects the catabolism of various amino acids, particularly valine. We describe a case compound heterozygous for ECHS1 mutations c.836T>C (novel) and c.8C>A identified by whole exome sequencing of proband and

Aging-Resistant Functionalized LDH⁻SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism.

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui; Wang, Xin

2018-05-18

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH⁻SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH⁻SAS composites. Successful preparation of LDH⁻SAS was confirmed by XRD, TGA and FTIR. LDH⁻SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH⁻SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance.

Nitrile crosslinked polyphenyl-quinoxaline/graphite fiber composites

Science.gov (United States)

Alston, W. B.

1976-01-01

Studies were performed to reduce the 600 F thermoplasticity of polyphenylquinoxaline (PPQ) matrix resins by introducing crosslinking by the reaction of terminal nitrile groups. Seven solvents and solvent mixtures were studied as the crosslinking catalysts and used to fabricate crosslinked PPQ/HMS graphite fiber composites. The room temperature and 600 F composite mechanical properties after short time and prolonged 600 F air exposure and the 600 F composite weight loss were determined and compared to those properties of high molecular weight, linear PPQ/HMS graphite fiber composites.

Formation and nitrile hydrogenation performance of Ru nanoparticles on a K-doped Al2O3 surface.

Science.gov (United States)

Muratsugu, Satoshi; Kityakarn, Sutasinee; Wang, Fei; Ishiguro, Nozomu; Kamachi, Takashi; Yoshizawa, Kazunari; Sekizawa, Oki; Uruga, Tomoya; Tada, Mizuki

2015-10-14

Decarbonylation-promoted Ru nanoparticle formation from Ru3(CO)12 on a basic K-doped Al2O3 surface was investigated by in situ FT-IR and in situ XAFS. Supported Ru3(CO)12 clusters on K-doped Al2O3 were converted stepwise to Ru nanoparticles, which catalyzed the selective hydrogenation of nitriles to the corresponding primary amines via initial decarbonylation, the nucleation of the Ru cluster core, and the growth of metallic Ru nanoparticles on the surface. As a result, small Ru nanoparticles, with an average diameter of less than 2 nm, were formed on the support and acted as efficient catalysts for nitrile hydrogenation at 343 K under hydrogen at atmospheric pressure. The structure and catalytic performance of Ru catalysts depended strongly on the type of oxide support, and the K-doped Al2O3 support acted as a good oxide for the selective nitrile hydrogenation without basic additives like ammonia. The activation of nitriles on the modelled Ru catalyst was also investigated by DFT calculations, and the adsorption structure of a nitrene-like intermediate, which was favourable for high primary amine selectivity, was the most stable structure on Ru compared with other intermediate structures.

Aging-Resistant Functionalized LDH–SAS/Nitrile-Butadiene Rubber Composites: Preparation and Study of Aging Kinetics/Anti-Aging Mechanism

Science.gov (United States)

Li, Tianxiang; Shi, Zhengren; He, Xianru; Jiang, Ping; Lu, Xiaobin; Zhang, Rui

2018-01-01

With the aim of improving the anti-aging properties of nitrile-butadiene rubber (NBR), a functional organic filler, namely LDH–SAS, prepared by intercalating 4-amino-benzenesulfonic acid monosodium salt (SAS) into layered double hydroxides (LDHs) through anion exchange, was added to nitrile-butadiene rubber (NBR), giving the NBR/LDH–SAS composites. Successful preparation of LDH–SAS was confirmed by XRD, TGA and FTIR. LDH–SAS was well dispersed in the NBR matrix, owing to its strong interaction with the nitrile group of NBR. The obtained NBR/LDH–SAS composites exhibited excellent thermo-oxidative aging resistance as shown by TGA-DSC. Further investigation by ATR-FTIR indicated that SAS can capture the radical groups, even during the aging process, which largely accounts for the improved aging resistance. PMID:29783656

Study of radiation induced structural changes in nitrile rubber

International Nuclear Information System (INIS)

Cardona, F.; Hill, D.J.T.; Pomery, P.J.; Whittaker, A.K.

1996-01-01

Full text: Copolymers of butadiene (BD) and acrylonitrile (AN) (NBR rubber), have become important commercial material. NBR rubbers are part of a larger classification of products often referred to as special-purpose rubbers. Oil resistance is the most important property of nitrile rubbers, and refer to the ability of the vulcanised product to retain its original physical properties such as modulus, tensile strength, abrasion resistance and dimensions, while in contact with oils and fuels. Despite these reported advantages very few studies have been conducted on the radiation yields and structural changes in nitrile rubbers during exposure to high energy radiation. In this study we are investigating the stability against gamma and UV radiation, to different doses in vacuum, of butadiene, acrylonitrile and NBR copolymers with different composition ratio BD/AN. The mechanism of radiation induced structural changes is being investigated using experimental techniques such as ESR, NMR (Solid-state), FT-IR, RAMAN and UV spectroscopy. Also is being investigated the effect of irradiation on the mechanical properties of stressed and unstressed samples by TGA, DSC, DMA, Instron and Creep Test measurements. So far the main effect have been a marked radiation-induced loss of unsaturation in the butadiene units, cis to trans isomerization and formation of crosslink structures (intermolecular and intramolecular). One of the main challenges in the studies of NBR polymers is to observe directly the crosslinks produces by the radiation induced chemical reactions. IR spectroscopy is unsuitable because of the low molar absorbity of the peaks related to intermolecular crosslinking and the overlapping of the peaks (1630-1670 cm-1) related to intramolecular crosslinking (cyclization), with conjugated and nonconjugated (-C=C-; -C=N-) double bonds. A. K. Whittaker has shown that crosslink structures in PBD can be detected and measured directly using solid-state 13 C NMR. This technique

Myosin-cross-reactive antigen (MCRA) protein from Bifidobacterium breve is a FAD-dependent fatty acid hydratase which has a function in stress protection

LENUS (Irish Health Repository)

Rosberg-Cody, Eva

2011-02-17

Abstract Background The aim of this study was to determine the catalytic activity and physiological role of myosin-cross-reactive antigen (MCRA) from Bifidobacterium breve NCIMB 702258. MCRA from B. breve NCIMB 702258 was cloned, sequenced and expressed in heterologous hosts (Lactococcus and Corynebacterium) and the recombinant proteins assessed for enzymatic activity against fatty acid substrates. Results MCRA catalysed the conversion of palmitoleic, oleic and linoleic acids to the corresponding 10-hydroxy fatty acids, but shorter chain fatty acids were not used as substrates, while the presence of trans-double bonds and double bonds beyond the position C12 abolished hydratase activity. The hydroxy fatty acids produced were not metabolised further. We also found that heterologous Lactococcus and Corynebacterium expressing MCRA accumulated increasing amounts of 10-HOA and 10-HOE in the culture medium. Furthermore, the heterologous cultures exhibited less sensitivity to heat and solvent stresses compared to corresponding controls. Conclusions MCRA protein in B. breve can be classified as a FAD-containing double bond hydratase, within the carbon-oxygen lyase family, which may be catalysing the first step in conjugated linoleic acid (CLA) production, and this protein has an additional function in bacterial stress protection.

Myosin-cross-reactive antigen (MCRA protein from Bifidobacterium breve is a FAD-dependent fatty acid hydratase which has a function in stress protection

Directory of Open Access Journals (Sweden)

Ross R

2011-02-01

Full Text Available Abstract Background The aim of this study was to determine the catalytic activity and physiological role of myosin-cross-reactive antigen (MCRA from Bifidobacterium breve NCIMB 702258. MCRA from B. breve NCIMB 702258 was cloned, sequenced and expressed in heterologous hosts (Lactococcus and Corynebacterium and the recombinant proteins assessed for enzymatic activity against fatty acid substrates. Results MCRA catalysed the conversion of palmitoleic, oleic and linoleic acids to the corresponding 10-hydroxy fatty acids, but shorter chain fatty acids were not used as substrates, while the presence of trans-double bonds and double bonds beyond the position C12 abolished hydratase activity. The hydroxy fatty acids produced were not metabolised further. We also found that heterologous Lactococcus and Corynebacterium expressing MCRA accumulated increasing amounts of 10-HOA and 10-HOE in the culture medium. Furthermore, the heterologous cultures exhibited less sensitivity to heat and solvent stresses compared to corresponding controls. Conclusions MCRA protein in B. breve can be classified as a FAD-containing double bond hydratase, within the carbon-oxygen lyase family, which may be catalysing the first step in conjugated linoleic acid (CLA production, and this protein has an additional function in bacterial stress protection.

Myosin-cross-reactive antigen (MCRA) protein from Bifidobacterium breve is a FAD-dependent fatty acid hydratase which has a function in stress protection.

Science.gov (United States)

Rosberg-Cody, Eva; Liavonchanka, Alena; Göbel, Cornelia; Ross, R Paul; O'Sullivan, Orla; Fitzgerald, Gerald F; Feussner, Ivo; Stanton, Catherine

2011-02-17

The aim of this study was to determine the catalytic activity and physiological role of myosin-cross-reactive antigen (MCRA) from Bifidobacterium breve NCIMB 702258. MCRA from B. breve NCIMB 702258 was cloned, sequenced and expressed in heterologous hosts (Lactococcus and Corynebacterium) and the recombinant proteins assessed for enzymatic activity against fatty acid substrates. MCRA catalysed the conversion of palmitoleic, oleic and linoleic acids to the corresponding 10-hydroxy fatty acids, but shorter chain fatty acids were not used as substrates, while the presence of trans-double bonds and double bonds beyond the position C12 abolished hydratase activity. The hydroxy fatty acids produced were not metabolised further. We also found that heterologous Lactococcus and Corynebacterium expressing MCRA accumulated increasing amounts of 10-HOA and 10-HOE in the culture medium. Furthermore, the heterologous cultures exhibited less sensitivity to heat and solvent stresses compared to corresponding controls. MCRA protein in B. breve can be classified as a FAD-containing double bond hydratase, within the carbon-oxygen lyase family, which may be catalysing the first step in conjugated linoleic acid (CLA) production, and this protein has an additional function in bacterial stress protection.

The Host Plant Metabolite Glucose Is the Precursor of Diffusible Signal Factor (DSF) Family Signals in Xanthomonas campestris

OpenAIRE

Deng, Yinyue; Liu, Xiaoling; Wu, Ji'en; Lee, Jasmine; Chen, Shaohua; Cheng, Yingying; Zhang, Chunyan; Zhang, Lian-Hui

2015-01-01

Plant pathogen Xanthomonas campestris pv. campestris produces cis-11-methyl-2-dodecenoic acid (diffusible signal factor [DSF]) as a cell-cell communication signal to regulate biofilm dispersal and virulence factor production. Previous studies have demonstrated that DSF biosynthesis is dependent on the presence of RpfF, an enoyl-coenzyme A (CoA) hydratase, but the DSF synthetic mechanism and the influence of the host plant on DSF biosynthesis are still not clear. We show here that exogenous ad...

Unexpected catalytic reactions of silyl-protected enol diazoacetates with nitrile oxides that form 5-arylaminofuran-2(3H)-one-4-carboxylates.

Science.gov (United States)

Xu, Xinfang; Shabashov, Dmitry; Zavalij, Peter Y; Doyle, Michael P

2012-02-03

Silyl-protected enol diazoacetates undergo dirhodium(II)-catalyzed reactions with nitrile oxides to form acid-labile ketenimines via dipolar cycloaddition of nitrile oxides to a donor/acceptor cyclopropene and Lossen rearrangement of the dipolar adduct; acid catalysis converts the ketenimine to the furan product. © 2012 American Chemical Society

Nitrile-functionalized ruthenium nanoparticles: charge delocalization through Ru − N ≡ C interface

International Nuclear Information System (INIS)

Zhang, Fengqi; Huang, Lin; Zou, Jiasui; Yan, Jinwu; Zhu, Jiaying; Kang, Xiongwu; Chen, Shaowei

2017-01-01

Ruthenium nanoparticles (2.06 ± 0.46 nm in diameter) were stabilized by the self-assembly of nitrile molecules onto the ruthenium colloid surface by virtue of the formation of Ru−N≡C interfacial bonding linkages. Thermogravimetric analysis showed that there were about 63 nitrile ligands per nanoparticle, corresponding to an average molecular footprint of 22.4 Å 2 . Proton nuclear magnetic resonance (NMR) studies suggested an end-on configuration of the nitrile moiety on the metal core surface. Meanwhile, infrared measurements showed that the C≡N stretch red-shifted from 2246 to 1944 cm −1 upon adsorption on the nanoparticle surfaces, as confirmed by 15 N isotopic labeling. This apparent red-shift suggests extensive intraparticle charge delocalization, which was further manifested by photoluminescence measurements of 1-cyanopyrene-functionalized ruthenium nanoparticles that exhibited a red shift of 40 nm of the emission maximum, in comparison to that of free monomers. The results further highlight the significance of metal−organic contacts in the manipulation of the dynamics of intraparticle charge transfer and the nanoparticle optical and electronic properties.

A Role for Cytosolic Fumarate Hydratase in Urea Cycle Metabolism and Renal Neoplasia

Directory of Open Access Journals (Sweden)

Julie Adam

2013-05-01

Full Text Available The identification of mutated metabolic enzymes in hereditary cancer syndromes has established a direct link between metabolic dysregulation and cancer. Mutations in the Krebs cycle enzyme, fumarate hydratase (FH, predispose affected individuals to leiomyomas, renal cysts, and cancers, though the respective pathogenic roles of mitochondrial and cytosolic FH isoforms remain undefined. On the basis of comprehensive metabolomic analyses, we demonstrate that FH1-deficient cells and tissues exhibit defects in the urea cycle/arginine metabolism. Remarkably, transgenic re-expression of cytosolic FH ameliorated both renal cyst development and urea cycle defects associated with renal-specific FH1 deletion in mice. Furthermore, acute arginine depletion significantly reduced the viability of FH1-deficient cells in comparison to controls. Our findings highlight the importance of extramitochondrial metabolic pathways in FH-associated oncogenesis and the urea cycle/arginine metabolism as a potential therapeutic target.

Alkylation of nitriles with gaseous carbenium ions. The ritter reaction in the dilute gas state

International Nuclear Information System (INIS)

Cacace, F.; Ciranni, G.; Giacomello, P.

1982-01-01

Radiolytically formed carbenium ions, such as sec-C 3 H 7 + , sec-C 4 H 9 + , and t-C 4 H 9 + , react in the gas phase with model aliphatic and aromatic nitriles yielding the corresponding nitrilium ions. The latter undergo efficient condensation with water that eventually leads to the formation of the corresponding N-alkylamides. The mechanism is analogous to the Ritter reaction in solution. The reactivity and selectivity of the gas-phase electrophilic attack on nitriles has been deduced from competition experiments under conditions that largely exclude the effects of solvation, ion pairing, etc., which complicate the interpretation of solution-chemistry measurements. 1 table

Polybenzoxazole-filled nitrile butadiene rubber compositions

Science.gov (United States)

Gajiwala, Himansu M. (Inventor); Guillot, David G. (Inventor)

2008-01-01

An insulation composition that comprises at least one nitrile butadiene rubber (NBR) having an acrylonitrile content that ranges from approximately 26% by weight to approximately 35% by weight and polybenzoxazole (PBO) fibers. The NBR may be a copolymer of acrylonitrile and butadiene and may be present in the insulation composition in a range of from approximately 45% by weight to approximately 56% by weight of a total weight of the insulation composition. The PBO fibers may be present in a range of from approximately 3% by weight to approximately 10% by weight of a total weight of the insulation composition. A rocket motor including the insulation composition and a method of insulating a rocket motor are also disclosed.

Nitrile ylides: diastereoselective cycloadditions using chiral oxazolidinones without Lewis acid.

Science.gov (United States)

Sibi, Mukund P; Soeta, Takahiro; Jasperse, Craig P

2009-12-03

Lewis acid complexation is generally required for chiral-auxiliary-controlled stereoselectivity, and chiral Lewis acid catalysis is frequently optimal for introducing asymmetry. In this work, we show that nitrile ylide cycloadditions to electron-poor acceptors attached to chiral auxiliaries proceed in high yield and stereoselectivity in the absence of Lewis acids. In contrast, chiral Lewis acids are inferior in these cycloadditions.

Review of organic nitrile incineration at the Toxic Substances Control Act Incinerator

International Nuclear Information System (INIS)

1997-10-01

Lockheed Martin Energy Systems, Inc. (LMES) operates the East Tennessee Technology Park (ETTP), formerly called the Oak Ridge K-25 Site, where uranium was enriched under contract with the US Department of Energy (DOE). Currently, ETTP missions include environmental management, waste management (WM), and the development of new technologies. As part of its WM mission, ETTP operates the TSCA (Toxic Substances Control Act) Incinerator (TSCAI) for treatment of hazardous waste and polychlorinated biphenyls (PCBs) contaminated with low-level radioactivity. Beginning in the autumn of 1995, employees from diverse ETTP buildings and departments reported experiencing headaches, fatigue, depression, muscle aches, sleeplessness, and muscle tremors. These symptoms were judged by a physician in the ETTP Health Services Department to be consistent with chronic exposures to hydrogen cyanide (HCN). The National Institute for Occupational Safety and Health (NIOSH) was called in to perform a health hazard evaluation to ascertain whether the employees' illnesses were in fact caused by occupational exposure to HCN. The NIOSH evaluation found no patterns for employees' reported symptoms with respect to work location or department. NIOSH also conducted a comprehensive air sampling study, which did not detect airborne cyanides at the ETTP. Employees, however, expressed concerns that the burning of nitrile-bearing wastes at the TSCAI might have produced HCN as a combustion product. Therefore, LMES and DOE established a multidisciplinary team (TSCAI Technical Review Team) to make a more detailed review of the possibility that combustion of nitrile-bearing wastes at the TSCAI might have either released nitriles or created HCN as a product of incomplete combustion (PIC)

Synthesis of β-phenylchalcogeno-α, β-unsaturated esters, ketones and nitriles using microwave and solvent-free conditions

International Nuclear Information System (INIS)

Lenardao, Eder J.; Silva, Marcio S.; Mendes, Samuel R.; Azambuja, Francisco de; Jacob, Raquel G.; Perin, Gelson; Santos, Paulo Cesar Silva dos

2007-01-01

A simple, clean and efficient solvent-free protocol was developed for hydrochalcogenation of alkynes containing a Michael acceptor (ester, ketone and nitrile) with phenylchalcogenolate anions generated in situ from the respective diphenyl dichalcogenide (Se, Te, S), using alumina supported sodium borohydride. This efficient and improved method is general and furnishes the respective (Z)-β-phenylchalcogeno-α,β-unsaturated esters, ketones and nitriles, in good yield and higher selectivity, compared with those that use organic solvent and inert atmosphere. The use of microwave (MW) irradiation facilitates the procedure and accelerates the reaction. (author)

An experimental and theoretical study of reaction mechanisms between nitriles and hydroxylamine.

Science.gov (United States)

Vörös, Attila; Mucsi, Zoltán; Baán, Zoltán; Timári, Géza; Hermecz, István; Mizsey, Péter; Finta, Zoltán

2014-10-28

The industrially relevant reaction between nitriles and hydroxylamine yielding amidoximes was studied in different molecular solvents and in ionic liquids. In industry, this procedure is carried out on the ton scale in alcohol solutions and the above transformation produces a significant amount of unexpected amide by-product, depending on the nature of the nitrile, which can cause further analytical and purification issues. Although there were earlier attempts to propose mechanisms for this transformation, the real reaction pathway is still under discussion. A new detailed reaction mechanistic explanation, based on theoretical and experimental proof, is given to augment the former mechanisms, which allowed us to find a more efficient, side-product free procedure. Interpreting the theoretical results obtained, it was shown that the application of specific imidazolium, phosphonium and quaternary ammonium based ionic liquids could decrease simultaneously the reaction time while eliminating the amide side-product, leading to the targeted product selectively. This robust and economic procedure now affords a fast, selective amide free synthesis of amidoximes.

Molecular Design, Synthesis and Trypanocidal Activity of Dipeptidyl Nitriles as Cruzain Inhibitors

Science.gov (United States)

Avelar, Leandro A. A.; Camilo, Cristian D.; de Albuquerque, Sérgio; Fernandes, William B.; Gonçalez, Cristiana; Kenny, Peter W.; Leitão, Andrei; McKerrow, James H.; Montanari, Carlos A.; Orozco, Erika V. Meñaca; Ribeiro, Jean F. R.; Rocha, Josmar R.; Rosini, Fabiana; Saidel, Marta E.

2015-01-01

A series of compounds based on the dipeptidyl nitrile scaffold were synthesized and assayed for their inhibitory activity against the T. cruzi cysteine protease cruzain. Structure activity relationships (SARs) were established using three, eleven and twelve variations respectively at the P1, P2 and P3 positions. A K i value of 16 nM was observed for the most potent of these inhibitors which reflects a degree of non-additivity in the SAR. An X-ray crystal structure was determined for the ligand-protein complex for the structural prototype for the series. Twenty three inhibitors were also evaluated for their anti-trypanosomal effects and an EC50 value of 28 μM was observed for the most potent of these. Although there remains scope for further optimization, the knowledge gained from this study is also transferable to the design of cruzain inhibitors based on warheads other than nitrile as well as alternative scaffolds. PMID:26173110

Regio- and stereochemistry of 1,3-dipolar cycloaddition of nitrile oxides to alkenes

International Nuclear Information System (INIS)

Litvinovskaya, Raisa P; Khripach, Vladimir A

2001-01-01

The published data on the chemistry of intermolecular 1,3-dipolar cycloaddition of nitrile oxides to different types of alkene derivatives are systematised. Various aspects of stereo- and regiochemistry of this reaction are considered. The bibliography includes 182 references.

Integrity of Disposable Nitrile Exam Gloves Exposed to Simulated Movement

Science.gov (United States)

Phalen, Robert N.; Wong, Weng Kee

2011-01-01

Every year, millions of health care, first responder, and industry workers are exposed to chemical and biological hazards. Disposable nitrile gloves are a common choice as both a chemical and physical barrier to these hazards, especially as an alternative to natural latex gloves. However, glove selection is complicated by the availability of several types or formulations of nitrile gloves, such as low-modulus, medical-grade, low-filler, and cleanroom products. This study evaluated the influence of simulated movement on the physical integrity (i.e., holes) of different nitrile exam glove brands and types. Thirty glove products were evaluated out-of-box and after exposure to simulated whole-glove movement for 2 hr. In lieu of the traditional 1-L water-leak test, a modified water-leak test, standardized to detect a 0.15 ± 0.05 mm hole in different regions of the glove, was developed. A specialized air inflation method simulated bidirectional stretching and whole-glove movement. A worst-case scenario with maximum stretching was evaluated. On average, movement did not have a significant effect on glove integrity (chi-square; p=0.068). The average effect was less than 1% between no movement (1.5%) and movement (2.1%) exposures. However, there was significant variability in glove integrity between different glove types (p ≤ 0.05). Cleanroom gloves, on average, had the highest percentage of leaks, and 50% failed the water-leak test. Low-modulus and medical-grade gloves had the lowest percentages of leaks, and no products failed the water-leak test. Variability in polymer formulation was suspected to account for the observed discrepancies, as well as the inability of the traditional 1-L water-leak test to detect holes in finger/thumb regions. Unexpectedly, greater than 80% of the glove defects were observed in the finger and thumb regions. It is recommended that existing water-leak tests be re-evaluated and standardized to account for product variability. PMID:21476169

1,3-Dipolar cycloadditions of ethoxycarbonyl-nitrile benzylimine and synthesis of ß-amino acids. Synthesis and reactions of ethyl 2-chloro-2-ethoxyacetate and 2-chloro-2-ethoxyacetylchloride

DEFF Research Database (Denmark)

Bach, K.K.; El-Seedi, H.R.; Jensen, H.M.

1994-01-01

The principles of 1,2-cyano-hydroxylation of olefins were applied to the preparation of 1,2-cyano-amines. The dipole component of this cycloaddition was nitrile imines, which formed pyrazolines with olefins. Ring cleavage was accomplished by thermolysis of 3-carboxypyrazolines, which gave 1,2-cyano-amines...... were carried out with the allylic ester - nitrile oxide and allylic ester - nitrile imine systems....

Studies on nitrile rubber degradation in zinc bromide completion fluid and its prevention by surface fluorination

Science.gov (United States)

Vega-Cantu, Yadira Itzel

Poly(acrylonitrile-co-butadiene) or nitrile-butadiene rubber (NBR) is frequently used as an O-ring material in the oil extraction industry due to its excellent chemical properties and resistance to oil. However, degradation of NBR gaskets is known to occur during the well completion and oil extraction process where packers are exposed to completion fluids such as ZnBr2 brine. Under these conditions NBR exhibits accelerated chemical degradation resulting in embrittlement and cracking. Samples of NBR, poly(acrylonitrile) (PAN) and poly(butadiene) (PB) have been exposed to ZnBr2 based completion fluid, and analyzed by ATR and diffuse reflectance IR. Analysis shows the ZnBr2 based completion fluid promotes hydrolysis of the nitrile group to form amides and carboxylic groups. Analysis also shows that carbon-carbon double bonds in NBR are unaffected after short exposure to zinc bromide based completion fluid, but are quickly hydrolyzed in acidic bromide mixtures. Although fluoropolymers have excellent chemical resistance, their strength is less than nitrile rubber and replacing the usual gasket materials with fluoroelastomers is expensive. However, a fluoropolymer surface on a nitrile elastomer can provide the needed chemical resistance while retaining their strength. In this study, we have shown that this can be achieved by direct fluorination, a rather easy and inexpensive process. Samples of NBR O-rings have been fluorinated by exposure to F2 and F2/HF mixtures at various temperatures. Fluorination with F 2 produces the desired fluoropolymer layer; however, fluorination by F2/HF mixtures gave a smoother fluorinated layer at lower temperatures and shorter times. Fluorinated samples were exposed to ZnBr2 drilling fluid and solvents. Elemental analysis shows that the fluorinated layer eliminates ZnBr2 diffusion into the NBR polymeric matrix. It was also found that surface fluorination significantly retards the loss of mechanical properties such as elasticity, tensile

Light Activation of a Cysteine Protease Inhibitor: Caging of a Peptidomimetic Nitrile with RuII(bpy)2

Science.gov (United States)

Respondek, Tomasz; Garner, Robert N.; Herroon, Mackenzie K.; Podgorski, Izabela; Turro, Claudia; Kodanko, Jeremy J.

2013-01-01

A novel method for caging protease inhibitors is described. The complex [RuII(bpy)2(1)2](PF6)2 (2) was prepared from the nitrile-based peptidomimetic inhibitor Ac-Phe-NHCH2CN (1). 1H NMR, UV-vis and IR spectroscopic and mass spectrometric data confirm that two equiv of inhibitor 1 bind to RuII through the nitrile functional group. Complex 2 shows excellent stability in aqueous solution in the dark and fast release of 1 upon irradiation with visible light. Due to binding to the RuII center, the nitriles of complex 2 are caged, and 2 does not act as a potent enzyme inhibitor. However, when 2 is irradiated, it releases 1 that inhibits the cysteine proteases papain and cathepsins B, K and L, up to two times more potently than 1 alone. Ratios for IC50 values for 2 range from 6:1 to 33:1 under dark vs. light conditions, against isolated enzymes and in human cell lysates, confirming a high level of photoinduced enzyme inhibition is obtained with this method. PMID:21973207

Nitrile-functionalized ruthenium nanoparticles: charge delocalization through Ru − N ≡ C interface

Energy Technology Data Exchange (ETDEWEB)

Zhang, Fengqi; Huang, Lin; Zou, Jiasui [South China University of Technology, New Energy Research Institute, School of Environment and Energy, Guangzhou Higher Education Mega Centre (China); Yan, Jinwu; Zhu, Jiaying [South China University of Technology, School of Bioscience and Bioengineering, Guangzhou Higher Education Mega Centre (China); Kang, Xiongwu, E-mail: esxkang@scut.edu.cn; Chen, Shaowei, E-mail: shaowei@ucsc.edu [South China University of Technology, New Energy Research Institute, School of Environment and Energy, Guangzhou Higher Education Mega Centre (China)

2017-03-15

Ruthenium nanoparticles (2.06 ± 0.46 nm in diameter) were stabilized by the self-assembly of nitrile molecules onto the ruthenium colloid surface by virtue of the formation of Ru−N≡C interfacial bonding linkages. Thermogravimetric analysis showed that there were about 63 nitrile ligands per nanoparticle, corresponding to an average molecular footprint of 22.4 Å{sup 2}. Proton nuclear magnetic resonance (NMR) studies suggested an end-on configuration of the nitrile moiety on the metal core surface. Meanwhile, infrared measurements showed that the C≡N stretch red-shifted from 2246 to 1944 cm{sup −1} upon adsorption on the nanoparticle surfaces, as confirmed by {sup 15}N isotopic labeling. This apparent red-shift suggests extensive intraparticle charge delocalization, which was further manifested by photoluminescence measurements of 1-cyanopyrene-functionalized ruthenium nanoparticles that exhibited a red shift of 40 nm of the emission maximum, in comparison to that of free monomers. The results further highlight the significance of metal−organic contacts in the manipulation of the dynamics of intraparticle charge transfer and the nanoparticle optical and electronic properties.

Fumarate Hydratase Deletion in Pancreatic β Cells Leads to Progressive Diabetes

Directory of Open Access Journals (Sweden)

Julie Adam

2017-09-01

Full Text Available We explored the role of the Krebs cycle enzyme fumarate hydratase (FH in glucose-stimulated insulin secretion (GSIS. Mice lacking Fh1 in pancreatic β cells (Fh1βKO mice appear normal for 6–8 weeks but then develop progressive glucose intolerance and diabetes. Glucose tolerance is rescued by expression of mitochondrial or cytosolic FH but not by deletion of Hif1α or Nrf2. Progressive hyperglycemia in Fh1βKO mice led to dysregulated metabolism in β cells, a decrease in glucose-induced ATP production, electrical activity, cytoplasmic [Ca2+]i elevation, and GSIS. Fh1 loss resulted in elevated intracellular fumarate, promoting succination of critical cysteines in GAPDH, GMPR, and PARK 7/DJ-1 and cytoplasmic acidification. Intracellular fumarate levels were increased in islets exposed to high glucose and in islets from human donors with type 2 diabetes (T2D. The impaired GSIS in islets from diabetic Fh1βKO mice was ameliorated after culture under normoglycemic conditions. These studies highlight the role of FH and dysregulated mitochondrial metabolism in T2D.

Fumarate hydratase is a critical metabolic regulator of hematopoietic stem cell functions.

Science.gov (United States)

Guitart, Amelie V; Panagopoulou, Theano I; Villacreces, Arnaud; Vukovic, Milica; Sepulveda, Catarina; Allen, Lewis; Carter, Roderick N; van de Lagemaat, Louie N; Morgan, Marcos; Giles, Peter; Sas, Zuzanna; Gonzalez, Marta Vila; Lawson, Hannah; Paris, Jasmin; Edwards-Hicks, Joy; Schaak, Katrin; Subramani, Chithra; Gezer, Deniz; Armesilla-Diaz, Alejandro; Wills, Jimi; Easterbrook, Aaron; Coman, David; So, Chi Wai Eric; O'Carroll, Donal; Vernimmen, Douglas; Rodrigues, Neil P; Pollard, Patrick J; Morton, Nicholas M; Finch, Andrew; Kranc, Kamil R

2017-03-06

Strict regulation of stem cell metabolism is essential for tissue functions and tumor suppression. In this study, we investigated the role of fumarate hydratase (Fh1), a key component of the mitochondrial tricarboxylic acid (TCA) cycle and cytosolic fumarate metabolism, in normal and leukemic hematopoiesis. Hematopoiesis-specific Fh1 deletion (resulting in endogenous fumarate accumulation and a genetic TCA cycle block reflected by decreased maximal mitochondrial respiration) caused lethal fetal liver hematopoietic defects and hematopoietic stem cell (HSC) failure. Reexpression of extramitochondrial Fh1 (which normalized fumarate levels but not maximal mitochondrial respiration) rescued these phenotypes, indicating the causal role of cellular fumarate accumulation. However, HSCs lacking mitochondrial Fh1 (which had normal fumarate levels but defective maximal mitochondrial respiration) failed to self-renew and displayed lymphoid differentiation defects. In contrast, leukemia-initiating cells lacking mitochondrial Fh1 efficiently propagated Meis1 / Hoxa9 -driven leukemia. Thus, we identify novel roles for fumarate metabolism in HSC maintenance and hematopoietic differentiation and reveal a differential requirement for mitochondrial Fh1 in normal hematopoiesis and leukemia propagation. © 2017 Guitart et al.

Steric congestion at, and proximity to, a ferrous center leads to hydration of α-nitrile substituents forming coordinated carboxamides.

Science.gov (United States)

Thallaj, Nasser K; Orain, Pierre-Yves; Thibon, Aurore; Sandroni, Martina; Welter, Richard; Mandon, Dominique

2014-08-04

The question of the conversion of nitrile groups into amides (nitrile hydration) by action of water in mild and eco-compatible conditions and in the presence of iron is addressed in this article. We come back to the only known example of hydration of a nitrile function into carboxamide by a ferrous [Fe(II)] center in particularly mild conditions and very efficiently and demonstrate that these unusual conditions result from the occurrence of steric stress at the reaction site and formation of a more stable end product. Two bis(cyano-substituted) (tris 2-pyridyl methyl amine) ligands have been prepared, and the structures of the corresponding FeCl2 complexes are reported, both in the solid state and in solution. These two ligands only differ by the position of the nitrile group on the tripod in the α and β position, respectively, with respect to the pyridine nitrogen. In any case, intramolecular coordination is impossible. Upon action of water, the nitrile groups are hydrated however only if they are located in the α position. The fact that the β-substituted β-(NC)2TPAFeCl2 complex is not water sensitive suggests that the reaction proceeds in an intramolecular way at the vicinity of the metal center. In the bis α-substituted α-(NC)2TPAFeCl2 complex, both functions are converted in a very clean fashion, pointing out that this complex exhibits ligand flexibility and is not deactivated after the first hydration. At a preparative scale, this reaction allows the one-pot conversion of the bis(cyano-substituted) tripod into a bis(amido-substituted) one in particularly mild conditions with a very good yield. Additionally, the XRD structure of a ferric compound in which the two carboxamido ligands are bound to the metal in a seven-coordinate environment is reported.

Reactions of carbonyl compounds with α,β-unsaturated nitriles as a convenient pathway to carbo- and heterocycles

International Nuclear Information System (INIS)

Sharanin, Yu A; Goncharenko, M P; Litvinov, Victor P

1998-01-01

Published data on the methods for synthesis of carbo- and heterocyclic compounds based on reactions of α,β-unsaturated nitriles with carbonyl compounds and activated phenols are surveyed. It is demonstrated that all these reactions occur via nucleophilic addition of the carbanion generated from a carbonyl compound to the double bond of an unsaturated nitrile (the Michael reaction). The main routes of transformation of the adducts into carbo- and heterocyclic compounds are considered. The methods for regioselective preparation of fused 4H-pyrans or 1,4-dihydropyridines by varying conditions of cyclisation of Michael adducts are discussed. The bibliography includes 249 references.

Reactions of nitriles in ices relevant to Titan, comets, and the interstellar medium: formation of cyanate ion, ketenimines, and isonitriles

Science.gov (United States)

Hudson, R. L.; Moore, M. H.

2004-12-01

Motivated by detections of nitriles in Titan's atmosphere, cometary comae, and the interstellar medium, we report laboratory investigations of the low-temperature chemistry of acetonitrile, propionitrile, acrylonitrile, cyanoacetylene, and cyanogen (CH 3CN, CH 3CH 2CN, CH 2CHCN, HCCCN, and NCCN, respectively). A few experiments were also done on isobutyronitrile and trimethylacetonitrile ((CH 3) 2CHCN and (CH 3) 3CCN, respectively). Trends were sought, and found, in the photo- and radiation chemical products of these molecules at 12-25 K. In the absence of water, all of these molecules isomerized to isonitriles, and CH 3CN, CH 3CH 2CN, and (CH 3) 2CHCN also formed ketenimines. In the presence of H 2O, no isonitriles were detected but rather the cyanate ion (OCN -) was seen in all cases. Although isonitriles, ketenimines, and OCN - were the main focus of our work, we also describe cases of hydrogen loss, to make smaller nitriles, and hydrogen addition (reduction), to make larger nitriles. HCN formation also was seen in most experiments. The results are presented in terms of nitrile ice chemistry on Titan, in cometary ice, and in the interstellar medium. Possible connections to prebiotic chemistry are briefly discussed.

Research and application of fuzzy subtractive clustering model on tensile strength of radiation vulcanization for nitrile-butadiene rubber

International Nuclear Information System (INIS)

Zuo Duwen; Wang Hong; Zhu Nankang

2010-01-01

By use of fuzzy subtractive clustering model, the relationship between tensile strength of radiation vulcanization of NBRL (Nitrile-butadiene rubber latex) and irradiation parameters have been investigated. The correlation coefficient was calculated to be 0.8222 in the comparison of experimental data to the predicted data. It was obvious that fuzzy model identification method is not only high precision with small computation, but also easy to be used. It can directly supply the evolution of tensile strength of NBR by fuzzy modeling method in radiation vulcanization process for nitrile-butadiene rubber. (authors)

[Risk assessment and risk control for occupational exposure to chemical toxicants from an isophorone nitrile device].

Science.gov (United States)

Wang, Dejun; Fu, Xiaokuan; Kong, Fanling; Sui, Shaofeng; Jiang, Yuanyuan; Du, Yinglin; Zhou, Jingyang

2014-06-01

Risk assessment and risk control for occupational exposure to chemical toxicants were performed on an isophorone nitrile device with an annual production of 5,000 tons, based on improved Singaporean semi-quantitative risk assessment method, with consideration of actual situation in China and in the present project. With the use of engineering analysis and identification of occupational hazards in the improved Singaporean semi-quantitative risk assessment method, hazard rating (HR) and risk assessment were performed on chemical toxicants from an isophorone nitrile device with an annual production of 5,000 tons. The chemical toxicants in the isophorone nitrile device were mainly isophorone, hydrocyanic acid, methanol, phosphoric acid, sodium hydroxide, and sodium cyanide; the HR values were mild hazard (2), extreme hazard (5), mild hazard (2), mild hazard (2), moderate hazard (3), and extreme hazard (5), respectively, and the corresponding exposure rating (ER) values were 2.09, 2.72, 2.76, 1.68, 2.0, and 1.59, respectively. The risk of chemical toxicants in this project was assessed according to the formula Risk = [HR×ER](1/2). Hydrocyanic acid was determined as high risk, sodium hydroxide and sodium cyanide as medium risk, and isophorone, methanol, and phosphoric acid as low risk. Priority in handling of risks was determined by risk rating. The table of risk control measure was established for pre-assessment of occupational hazards. With risk assessment in this study, we concluded that the isophorone nitrile device with 5,000 ton annual production was a high-occupational hazard device. This device is a project of extreme occupational hazard. The improved Singaporean semi-quantitative risk assessment method is a scientific and applicable method, and is especially suitable for pre-evaluation of on-site project with no analogy.

Nitrile group as infrared probe for the characterization of the conformation of bovine serum albumin solubilized in reverse micelles.

Science.gov (United States)

Xue, Luyan; Zou, Feixue; Zhao, Yin; Huang, Xirong; Qu, Yinbo

2012-11-01

Infrared spectroscopy is a powerful technique for structure characterization. For a protein hosted in a reversed micellar medium, the spectral features of the protein are always interfered by the IR absorption bands of the medium in addition to the congestion in their IR spectra. Fortunately, there is a transparent window in the 2500-2200 cm(-1) region. Incorporation of a vibrational probe with IR absorption frequencies in this region into proteins represents a promising strategy for the study of the conformation of a protein in a reverse micelle. In the present work, we incorporated 4-cyanobenzyl group (CN) into bovine serum albumin (BSA) via cysteine alkylation reactions under mild conditions. Circular dichroism spectroscopy showed that the CN modified BSA (CNBSA) could retain its conformation. When CNBSA was hosted in AOT reverse micelle, it was found that the nitrile group on BSA was sensitive to the conformational change of BSA induced by urea as an additive in the reverse micelle. The peak splitting of nitrile group was also observed when the size of AOT reverse micelle and the concentration of an electrolyte were varied. Obviously, the shift of the IR absorption peak and/or peak splitting of nitrile group on BSA are correlated with the change of BSA conformation in AOT reverse micelle. So we conclude that the nitrile infrared probe can be used to study protein conformation in a reverse micelle. Copyright © 2012 Elsevier B.V. All rights reserved.

An efficient one-pot three-component synthesis of α-amino nitriles via Strecker reaction catalysed by bismuth(III nitrate

Directory of Open Access Journals (Sweden)

S. Sheik Mansoor

2016-09-01

Full Text Available A convenient and efficient one-pot method for the synthesis of a variety of α-amino nitriles from aldehydes, amines and trimethylsilyl cyanide (TMSCN in the presence of a catalytic amount of Bi(NO33 at room temperature in acetonitrile (MeCN is described. The significant features of this method are simple work-up procedure, inexpensive and non-toxic catalyst, shorter reaction times and excellent product yields. The catalyst Bi(NO33 can be reused. The reusability of the catalyst has been studied for the synthesis of various amino nitriles.

Nitrile, amide and temperature effects on amidase-kinetics during acrylonitrile bioconversion by nitrile-hydratase/amidase in situ cascade system.

Science.gov (United States)

Cantarella, Laura; Gallifuoco, Alberto; Spera, Agata; Cantarella, Maria

2013-08-01

In this study the amidase kinetics of an in situ NHase/AMase cascade system was explored as a function of operational parameters such as temperature, substrate concentration and product formation. The results indicated that controlling amidase inactivation, during acrylonitrile bioconversion, makes it possible to recover the intermediate product of the two-step reaction in almost a pure form, without using purified enzyme. It has been demonstrated, in long-term experiments performed in continuous stirred UF-membrane bioreactors, that amidase is kinetically controlled by its proper substrate, depending on the structure, and by acrylonitrile. Using acrylamide, AMase-stability is temperature dependent (5°C, kd=0.008 h(-1); 30°C kd=0.023 h(-1)). Using benzamide, amidase is thermally stable up to 50°C and no substrate inhibition/inactivation occurs. With acrylonitrile, AMase-activity and -stability remain unchanged at concentrations <200 mM but at 200 mM, 35°C, after 70 h process, 90% irreversible inactivation occurs as no AMase-activity on benzamide revives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Effect of physicochemical parameters on nitrile-hydrolyzing potentials of newly isolated nitrilase of Fusarium oxysporum f. sp. lycopercisi ED-3.

Science.gov (United States)

Bura Gohain, Manorama; Talukdar, Shruti; Talukdar, Madhumita; Yadav, Archana; Gogoi, Binod Kumar; Bora, Tarun Chandra; Kiran, Shashi; Gulati, Arvind

2015-01-01

In recent years, nitrilases from fungus have received increasing attention, and most of the studies are performed on nitrilases of bacterial origin. Frequently used methods are based on analytical methods such as high-performance liquid chromatography, liquid chromatography-mass spectrometry, and gas chromatography; therefore, an efficient, user friendly, and rapid method has been developed to screen nitrilase enzyme based on the principle of color change of a pH indicator. Phenol red amended with the minimal medium appears light yellow at neutral pH, which changes into pink with the formation of ammonia, indicating nitrilase activity in the reaction medium. A highly potent strain ED-3 identified as Fusarium oxysporum f. sp. lycopercisi (specific activity 17.5 µmol/Min/mg dcw) was isolated using this method. The nitrilase activity of F. oxysporum f. sp. lycopercisi ED-3 strain showed wide substrate specificity toward aliphatic nitriles, aromatic nitriles, and orthosubstituted heterocyclic nitriles. 4-Aminobenzonitrile was found to be a superior substrate among all the nitriles used in this study. This nitrilase was active within pH 5-10 and temperature ranging from 25 to 60 °C with optimal at pH 7.0 and temperature at 50 °C. The nitrilase activity was enhanced to several folds through optimization of culture and biotransformation conditions from 1,121 to 1,941 µmol/Min. © 2014 International Union of Biochemistry and Molecular Biology, Inc.

Reduced systemic toxicity and preserved vestibular toxicity following co-treatment with nitriles and CYP2E1 inhibitors: a mouse model for hair cell loss.

Science.gov (United States)

Saldaña-Ruíz, Sandra; Boadas-Vaello, Pere; Sedó-Cabezón, Lara; Llorens, Jordi

2013-10-01

Several nitriles, including allylnitrile and cis-crotononitrile, have been shown to be ototoxic and cause hair cell degeneration in the auditory and vestibular sensory epithelia of mice. However, these nitriles can also be lethal due in large part to the microsomal metabolic release of cyanide, which is mostly dependent on the activity of the 2E1 isoform of the cytochrome P450 (CYP2E1). In this study, we co-administered mice with a nitrile and, to reduce their lethal effects, a selective CYP2E1 inhibitor: diallylsulfide (DAS) or trans-1,2-dichloroethylene (TDCE). Both in female 129S1/SvImJ (129S1) mice co-treated with DAS and cis-crotononitrile and in male RjOrl:Swiss/CD-1 (Swiss) mice co-treated with TDCE and allylnitrile, the nitrile caused a dose-dependent loss of vestibular function, as assessed by a specific behavioral test battery, and of hair cells, as assessed by hair bundle counts using scanning electron microscopy. In the experiments, the CYP2E1 inhibitors provided significant protection against the lethal effects of the nitriles and did not diminish the vestibular toxicity as assessed by behavioral effects in comparison to animals receiving no inhibitor. Additional experiments using a single dose of allylnitrile demonstrated that TDCE does not cause hair cell loss on its own and does not modify the vestibular toxicity of the nitrile in either male or female 129S1 mice. In all the experiments, high vestibular dysfunction scores in the behavioral test battery predicted extensive to complete loss of hair cells in the utricles. This provides a means of selecting animals for subsequent studies of vestibular hair cell regeneration or replacement.

In situ generation of nitrilium from nitrile ylide and the subsequent Mumm rearrangement: copper-catalyzed synthesis of unsymmetrical diacylglycine esters.

Science.gov (United States)

Chen, Jijun; Shao, Ying; Ma, Liang; Ma, Meihua; Wan, Xiaobing

2016-12-07

A novel in situ generation of nitrilium from a nitrile ylide and the subsequent Mumm rearrangement of carboxylic acid, nitrile, and diazo compounds gave various unsymmetrical diacylglycine esters in moderate to high yields. This copper-catalyzed cascade reaction enables one-pot generation of two C-N bonds, one C[double bond, length as m-dash]O bond, and one C-H bond, with nitrogen as the only byproduct. The reaction has a broad functional-group tolerance, is rapid, easily scales up to the 100 mmol scale, and is insensitive to air and moisture.

NMR studies on 1,3-dipolar cycloaddition of nitrile oxides to norbornenes

International Nuclear Information System (INIS)

Gucma, Mirosław; Gołębiewski, W. Marek; Krawczyk, Maria

2013-01-01

The 1,3-dipolar cycloaddition reaction of nitrile oxides to norbornenes substituted with an acrylate-derived moiety was examined. Only adducts to norbornene system were formed with a good exo selectivity and complete site-selectivity. Structures of the products were elucidated by an extensive application of electrospray ionization-mass spectrometry (ESI-MS) and 2D 1 H and 13 C nuclear magnetic resonance (NMR). (author)

NMR studies on 1,3-dipolar cycloaddition of nitrile oxides to norbornenes

Energy Technology Data Exchange (ETDEWEB)

Gucma, Miroslaw; Golebiewski, W. Marek; Krawczyk, Maria, E-mail: golebiewski@ipo.waw.pl [Institute of Industrial Organic Chemistry, Warsaw (Poland)

2013-05-15

The 1,3-dipolar cycloaddition reaction of nitrile oxides to norbornenes substituted with an acrylate-derived moiety was examined. Only adducts to norbornene system were formed with a good exo selectivity and complete site-selectivity. Structures of the products were elucidated by an extensive application of electrospray ionization-mass spectrometry (ESI-MS) and 2D {sup 1}H and {sup 13}C nuclear magnetic resonance (NMR). (author)

Reactions of 1,3-dioxacycloalkanes and their 2-arsena, 2-bora, 2-germa, 2-sila, and 2-thia analogs with nitriles

International Nuclear Information System (INIS)

Kuznetsov, V.V.

2005-01-01

New reactions of five-, six-, and seven-membered 1,3-dioxacycloalkanes and their 2-arsena, 2-bora, 2-germa, 2-sila, and 2-thia analogs with nitriles giving rise to 1,3-oxazacycloalkanes and then to amino alcohols are surveyed. The reactions under consideration, including the reactions of boronic and boric acid esters with nitriles, supplement the known chemical transformations of 1,3-dioxacycloalkanes and their 2-hetero atomic analogs and provide a wide scope for the synthesis of diverse functional derivatives on their basis [ru

Design, synthesis and crystallographic analysis of nitrile-based broad-spectrum peptidomimetic inhibitors for coronavirus 3C-like proteases.

Science.gov (United States)

Chuck, Chi-Pang; Chen, Chao; Ke, Zhihai; Wan, David Chi-Cheong; Chow, Hak-Fun; Wong, Kam-Bo

2013-01-01

Coronaviral infection is associated with up to 5% of respiratory tract diseases. The 3C-like protease (3CL(pro)) of coronaviruses is required for proteolytic processing of polyproteins and viral replication, and is a promising target for the development of drugs against coronaviral infection. We designed and synthesized four nitrile-based peptidomimetic inhibitors with different N-terminal protective groups and different peptide length, and examined their inhibitory effect on the in-vitro enzymatic activity of 3CL(pro) of severe-acute-respiratory-syndrome-coronavirus. The IC(50) values of the inhibitors were in the range of 4.6-49 μM, demonstrating that the nitrile warhead can effectively inactivate the 3CL(pro) autocleavage process. The best inhibitor, Cbz-AVLQ-CN with an N-terminal carbobenzyloxy group, was ~10x more potent than the other inhibitors tested. Crystal structures of the enzyme-inhibitor complexes showed that the nitrile warhead inhibits 3CL(pro) by forming a covalent bond with the catalytic Cys145 residue, while the AVLQ peptide forms a number of favourable interactions with the S1-S4 substrate-binding pockets. We have further showed that the peptidomimetic inhibitor, Cbz-AVLQ-CN, has broad-spectrum inhibition against 3CL(pro) from human coronavirus strains 229E, NL63, OC43, HKU1, and infectious bronchitis virus, with IC(50) values ranging from 1.3 to 3.7 μM, but no detectable inhibition against caspase-3. In summary, we have shown that the nitrile-based peptidomimetic inhibitors are effective against 3CL(pro), and they inhibit 3CL(pro) from a broad range of coronaviruses. Our results provide further insights into the future design of drugs that could serve as a first line defence against coronaviral infection. Copyright © 2012 Elsevier Masson SAS. All rights reserved.

Nitrile functionalized halloysite nanotubes/poly(arylene ether nitrile) nanocomposites: Interface control, characterization, and improved properties

Science.gov (United States)

Wan, Xinyi; Zhan, Yingqing; Zeng, Guangyong; He, Yi

2017-01-01

To develop high-performance halloysite nanotube (HNT)-based nanocomposites, the two key issues need to be considered: precise interface control and the dispersal of HNTs. This study presents an efficient way to functionalize halloysite nanotubes with 3-aminophenoxy-phthalonitrile, followed by compounding with poly(arylene ether nitrile) (PEN), to prepare functional nanocomposite films. The surface functionalization of HNTs was characterized and confirmed by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Compared with neat PEN, the tensile strength and modulus of the resulting PEN nanocomposites with 3 wt% functionalized HNTs were found to increase by 25.7% and 20.7%, respectively. The good dispersion and high capacitance of the dielectric layer resulted in PEN/HNTs nancomposites with enhanced dielectric permittivity and relatively low dielectric loss. Moreover, the addition of functional HNTs greatly improved the thermal stability of PEN, which could be further enhanced through the chemical cross-linking reaction between the functional HNTs and the PEN matrix. This work provides a new path toward obtaining advanced polymer-based nanocomposites with functional properties.

An entry to a chiral dihydropyrazole scaffold: enantioselective [3 + 2] cycloaddition of nitrile imines.

Science.gov (United States)

Sibi, Mukund P; Stanley, Levi M; Jasperse, Craig P

2005-06-15

We have developed a versatile strategy to access dihydropyrazoles in highly enantioenriched form. Dipolar cycloaddition of electron-deficient acceptors and in situ-generated nitrile imines proceeds with high regio- and enantioselectivity using 10 mol % chiral Lewis acid catalyst. A variety of dihydropyrazoles that incorporate functionality for further manipulation have been prepared.

Ligand-controlled reactivity, selectivity, and mechanism of cationic ruthenium-catalyzed hydrosilylations of alkynes, ketones, and nitriles: a theoretical study.

Science.gov (United States)

Yang, Yun-Fang; Chung, Lung Wa; Zhang, Xinhao; Houk, K N; Wu, Yun-Dong

2014-09-19

Density functional theory calculations with the M06 functional have been performed on the reactivity, selectivity, and mechanism of hydrosilylations of alkynes, ketones, and nitriles catalyzed by cationic ruthenium complexes [CpRu(L)(MeCN)2](+), with L = P(i)Pr3 or MeCN. The hydrosilylation of alkynes with L = P(i)Pr3 involves an initial silyl migration mechanism to generate the anti-Markovnikov product, in contrast to the Markovnikov product obtained with L = MeCN. The bulky phosphine ligand directs the silyl group to migrate to Cβ of the alkyne. This explains the anti-Markovnikov selectivity of the catalyst with L = P(i)Pr3. By contrast, the silane additions to either ketone or nitrile proceed through an ionic SN2-Si outer-sphere mechanism, in which the substrate attacks the Si center. The P(i)Pr3 ligand facilitates the activation of the Si-H bond to furnish a η(2)-silane complex, whereas a η(1)-silane complex is formed for the MeCN ligand. This property of the phosphine ligand enables the catalytic hydrosilylation of ketones and nitriles in addition to that of alkynes.

Purification and characterization of the enantioselective nitrile hydratase from Rhodococcus equi A4

Czech Academy of Sciences Publication Activity Database

Přepechalová, Irena; Martínková, Ludmila; Stolz, A.; Ovesná, M.; Bezouška, Karel; Kopecký, Jan; Křen, Vladimír

2001-01-01

Roč. 55, - (2001), s. 150-156 ISSN 0175-7598 R&D Projects: GA AV ČR IAA4020802 Institutional research plan: CEZ:A53/98:Z5-020-9ii Subject RIV: EE - Microbiology, Virology Impact factor: 1.754, year: 2001

Sulfonated poly(fluorenyl ether ketone nitrile) electrolyte membrane with high proton conductivity and low water uptake

Energy Technology Data Exchange (ETDEWEB)

Tian, S.H.; Wang, S.J.; Xiao, M.; Meng, Y.Z. [State Key Laboratory of Optoelectronic Materials and Technologies/Institute of Optoelectronic and Functional Composite Materials, Sun Yat-sen University, Guangzhou 510275 (China); Shu, D. [School of Chemistry and Environmental, South China Normal University, Guangzhou 510006 (China)

2010-01-01

High molecular weight sulfonated poly(fluorenyl ether ketone nitrile)s with different equivalent weight (EW) from 681 to 369 g mequiv.{sup -1} are synthesized by the nucleophilic substitution polycondensation of various amounts of sulfonated difluorobenzophenone (SDFBP) and 2,6-difluorobenzonitrile (DFBN) with bisphenol fluorene (BPF). The synthesized copolymers are characterized by {sup 1}H NMR, FT-IR, TGA, and DSC techniques. The membranes cast from the corresponding copolymers exhibit superior thermal stability, good oxidative stability and high proton conductivity, but low water uptake due to the strong nitrile dipole interchain interactions that combine to limit swelling. Among all the membranes, the membrane with EW of 441 g mequiv.{sup -1} shows optimum properties of both high proton conductivity of 41.9 mS cm{sup -1} and low water uptake of 42.6%. Accordingly, That membrane is fabricated into a membrane electrode assembly (MEA) and evaluated in a single proton exchange membrane fuel cell (PEMFC). The experimental results indicate its similar cell performance as that of Nafion {sup registered} 117 at 70 C, but much better cell performance at higher temperatures. At the potential of 0.6 V, the current density of fuel cell using the prepared membrane and Nafion {sup registered} 117 is 0.46 and 0.25 A cm{sup -2}, respectively. The highest current density of the former reaches as high as 1.25 A cm{sup -2}. (author)

Preparation and dual microwave-absorption properties of carboxylic poly(arylene ether nitrile)/Fe3O4 hybrid microspheres

International Nuclear Information System (INIS)

Ma Zhen; Meng Fanbin; Zhao Rui; Zhan Yingqing; Zhong Jiachun; Liu Xiaobo

2012-01-01

The carboxylic poly(arylene ether nitrile)/Fe 3 O 4 hybrid microspheres were prepared via solvothermal method. The carboxylic poly(arylene ether nitrile) (PEN-COOH) was introduced into the Fe 3 O 4 microspheres by chemisorption with mass content up to 15% as defined by infrared spectra and thermal gravimetric analysis. The hybrid sphere is of hierarchical polymer–inorganic microstructure as observed by transmission electron microscopy. The microwave-absorption of the sample owns a shifting peak and a special immobilized peak with the variation of absorber thickness from 3 to 5 mm. Maximum microwave-absorption of the product is capable of over −30 dB in the range of 10–12 GHz. By proposed equivalent filter circuit model, the immobilized peak was attributed to the ordered nanostructure where the Fe 3 O 4 nanocrystals were isolated by PEN-COOH. The product has the potential to be applied as microwave absorber with high microwave-absorption, good dispersibility and robust polymer–inorganic interfacial adherence. - Highlights: ► We prepared poly(arylene ether nitrile)/Fe 3 O 4 hybrid microspheres with hierarchical polymer–inorganic nanostructure. ► A shifting and an immobilized microwave absorbing peaks were observed on the sample. ► Possible mechanism was proposed on the basis of electromagnetic data.

Selective N-alkylation of amines using nitriles under hydrogenation conditions: facile synthesis of secondary and tertiary amines.

Science.gov (United States)

Ikawa, Takashi; Fujita, Yuki; Mizusaki, Tomoteru; Betsuin, Sae; Takamatsu, Haruki; Maegawa, Tomohiro; Monguchi, Yasunari; Sajiki, Hironao

2012-01-14

Nitriles were found to be highly effective alkylating reagents for the selective N-alkylation of amines under catalytic hydrogenation conditions. For the aromatic primary amines, the corresponding secondary amines were selectively obtained under Pd/C-catalyzed hydrogenation conditions. Although the use of electron poor aromatic amines or bulky nitriles showed a lower reactivity toward the reductive alkylation, the addition of NH(4)OAc enhanced the reactivity to give secondary aromatic amines in good to excellent yields. Under the same reaction conditions, aromatic nitro compounds instead of the aromatic primary amines could be directly transformed into secondary amines via a domino reaction involving the one-pot hydrogenation of the nitro group and the reductive alkylation of the amines. While aliphatic amines were effectively converted to the corresponding tertiary amines under Pd/C-catalyzed conditions, Rh/C was a highly effective catalyst for the N-monoalkylation of aliphatic primary amines without over-alkylation to the tertiary amines. Furthermore, the combination of the Rh/C-catalyzed N-monoalkylation of the aliphatic primary amines and additional Pd/C-catalyzed alkylation of the resulting secondary aliphatic amines could selectively prepare aliphatic tertiary amines possessing three different alkyl groups. According to the mechanistic studies, it seems reasonable to conclude that nitriles were reduced to aldimines before the nucleophilic attack of the amine during the first step of the reaction.

Preliminary Study on Effect of Chemical Composition Alteration on Elastic Recovery and Stress Recovery of Nitrile Gloves

Directory of Open Access Journals (Sweden)

Tan Kai Yang

2018-01-01

Full Text Available Nitrile gloves are widely used in the medical and automobile field due to its superiority in hypo-allergic component and chemical resistance over natural latex gloves. However, poor elastic recovery of nitrile glove to compressive force also creates an aesthetic issue for customers with high levels of wrinkling after removing from glove box. This paper demonstrates the preliminary study on the varies chemical composition such as crosslinking agents, sulphur and zinc oxide, the accelerator agent added during curing process, and the rubber filler Titanium Dioxide, on the elastic recovery and stress relaxation in nitrile gloves manufacturing. These chemical were studied at different concentration level comparing the high and low level versus the normal production range. Due to the inconsistency in the analysis technique on the surface imaging, the elastic recovery result was unable to be quantified and was not conclusive at this point. The cross linking agents, sulphur and zinc oxide, and the accelerator agent, played a significant role in the mechanical strength of the gloves. Increment of these chemicals result in higher tensile strength, but a reduction in the elasticity of the materials in which causes a lesser elongation at break percentage for the gloves. Both cross-linkers demonstrate different behaviour where higher sulphur content, provide higher stress relaxation (SR% yet zinc oxide shows otherwise.

1,3-Dipolar cycloaddition reactions of nitrile oxides in the synthesis of natural compounds and their analogues

International Nuclear Information System (INIS)

Kotyatkina, Anna I; Zhabinsky, Vladimir N; Khripach, Vladimir A

2001-01-01

The published data on the use of 1,3-dipolar cycloaddition reactions of nitrile oxides in the synthesis of natural compounds and their analogues are systematised and reviewed. The bibliography includes 145 references.

Permeability test and fuzzy orthogonal analysis of hydrogenated nitrile O-ring

Directory of Open Access Journals (Sweden)

Qin Hu

2015-03-01

Full Text Available In the high temperature, high pressure and high corrosive environment of the oil and gas drilling downhole, the weatherability of rubber sealing material has a great influence on the production safety. In order to study the important degree of every key environmental factor in downhole influencing the sealing performance of rubber sealing material, a new device of simulating downhole environment is designed to test the permeability of O-ring. The sample is hydrogenated nitrile O-ring and orthogonal experiment method is used to do nine tests by getting three levels from temperature, pressure and CO2 volume fraction. Test adopts fuzzy orthogonal method to analyze the main effects and the interaction between two factors, taking tensile strength, diameter variety rate and pH value of indicator as evaluation index. The results show that: the environmental factor influencing the sealing performance of hydrogenated nitrile O-ring from high to low by turns is temperature, pressure and CO2 volume fraction, while the interaction between temperature and pressure is the most significant. It provides a new way to study the influence of downhole complex environment on the performance of rubber sealing material. Moreover, the results have important reference value to further study the failure mechanism of rubber sealing ring in many environmental factors and the rational use in engineering.

Highly regio- and diastereoselective, acidic clay supported intramolecular nitrile oxide-alkene cycloaddition on D-ribose derived nitriles: an efficient synthetic route to isoxazoline fused five and six membered carbocycles.

Science.gov (United States)

Panda, Amarendra; Das, Sulagna; Pal, Shantanu

2014-10-29

An efficient synthetic route to isoxazoline fused carbocycles from carbohydrate scaffolds that comprise of free hydroxyl group(s) is described with high regio- and stereoselectivity. Montmorillonite K-10/chloramine T oxidation and in situ intramolecular nitrile oxide-alkene cycloaddition (INOC) of D-ribose derived oximes have been developed for the diversity oriented synthesis of isoxazoline fused five and six membered carbocycles. Copyright © 2014 Elsevier Ltd. All rights reserved.

Cellulose nanocrystals reinforced foamed nitrile rubber nanocomposites.

Science.gov (United States)

Chen, Yukun; Zhang, Yuanbing; Xu, Chuanhui; Cao, Xiaodong

2015-10-05

Research on foamed nitrile rubber (NBR)/cellulose nanocrystals (CNs) nanocomposites is rarely found in the literatures. In this paper, CNs suspension and NBR latex was mixed to prepared the foamed NBR/CNs nanocomposites. We found that the CNs mainly located in the cell walls, effectively reinforcing the foamed NBR. The strong interaction between the CNs and NBR matrix restricted the mobility of NBR chains surrounding the CNs, hence increasing the crosslink density of the NBR matrix. CNs exhibited excellent reinforcement on the foamed NBR: a remarkable increase nearly 76% in the tensile strength of the foamed nanocomposites was achieved with a load of only 15 phr CNs. Enhanced mechanical properties make the foamed NBR/CNs nanocomposites a promising damping material for industrial applications with a potential to reduce the petroleum consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

Nucleophilic addition of nitriles to secondary terpene alcohols

International Nuclear Information System (INIS)

Kozlov, N.G.; Popova, L.A.; Nesterov, G.V.

1987-01-01

The addition of nitriles of varying nucleophilicity to isocamphanol and exo-1,5,5-trimethyl-bicyclo[2.2.1]heptan-2-ol (isofenchol) was investigated. The authors examined the effect of the reaction conditions on the yield and structure of the target products of the reaction: N-substituted amides. As a result of the study, it was shown that in the reaction with chloroacetonitrile, propionitrile, methoxypropionitrile, isovaleronitrile, and phenylacetonitrile under the conditions of the Ritter reaction, isocamphanol is transformed into the corresponding substituted exo-N-acyl-1,7,7-trimethylbicyclo[2.2.1]hept-2-ylamines, as in the reaction with aceto- and benzonitriles, due to 2,6-hydride displacement accompanied by Wagner-Meerwein rearrangement. The structures of these amides were demonstrated by PMR spectroscopy

Crystallization and preliminary X-ray characterization of the nitrile reductase QueF: a queuosine-biosynthesis enzyme

International Nuclear Information System (INIS)

Swairjo, Manal A.; Reddy, Robert R.; Lee, Bobby; Van Lanen, Steven G.; Brown, Shannon; Crécy-Lagard, Valérie de; Iwata-Reuyl, Dirk; Schimmel, Paul

2005-01-01

Structural informatics and modelling correctly predicted that substrate was required to obtain diffracting crystals of the first characterized nitrile oxidoreductase: the homododecameric QueF. QueF (MW = 19.4 kDa) is a recently characterized nitrile oxidoreductase which catalyzes the NADPH-dependent reduction of 7-cyano-7-deazaguanine (preQ 0 ) to 7-aminomethyl-7-deazaguanine, a late step in the biosynthesis of the modified tRNA nucleoside queuosine. Initial crystals of homododecameric Bacillus subtilis QueF diffracted poorly to 8.0 Å. A three-dimensional model based on homology with the tunnel-fold enzyme GTP cyclohydrolase I suggested catalysis at intersubunit interfaces and a potential role for substrate binding in quaternary structure stabilization. Guided by this insight, a second crystal form was grown that was strictly dependent on the presence of preQ 0 . This crystal form diffracted to 2.25 Å resolution

Cysteine protease inhibition by nitrile-based inhibitors: a computational study

Science.gov (United States)

Quesne, Matthew G.; Ward, Richard A.; de Visser, Sam P.

2013-01-01

Cysteine protease enzymes are important for human physiology and catalyze key protein degradation pathways. These enzymes react via a nucleophilic reaction mechanism that involves a cysteine residue and the proton of a proximal histidine. Particularly efficient inhibitors of these enzymes are nitrile-based, however, the details of the catalytic reaction mechanism currently are poorly understood. To gain further insight into the inhibition of these molecules, we have performed a combined density functional theory and quantum mechanics/molecular mechanics study on the reaction of a nitrile-based inhibitor with the enzyme active site amino acids. We show here that small perturbations to the inhibitor structure can have dramatic effects on the catalysis and inhibition processes. Thus, we investigated a range of inhibitor templates and show that specific structural changes reduce the inhibitory efficiency by several orders of magnitude. Moreover, as the reaction takes place on a polar surface, we find strong differences between the DFT and QM/MM calculated energetics. In particular, the DFT model led to dramatic distortions from the starting structure and the convergence to a structure that would not fit the enzyme active site. In the subsequent QM/MM study we investigated the use of mechanical vs. electronic embedding on the kinetics, thermodynamics and geometries along the reaction mechanism. We find minor effects on the kinetics of the reaction but large geometric and thermodynamics differences as a result of inclusion of electronic embedding corrections. The work here highlights the importance of model choice in the investigation of this biochemical reaction mechanism. PMID:24790966

β-Isocyanoalanine as an IR probe: comparison of vibrational dynamics between isonitrile and nitrile-derivatized IR probes.

Science.gov (United States)

Maj, Michał; Ahn, Changwoo; Kossowska, Dorota; Park, Kwanghee; Kwak, Kyungwon; Han, Hogyu; Cho, Minhaeng

2015-05-07

An infrared (IR) probe based on isonitrile (NC)-derivatized alanine 1 was synthesized and the vibrational properties of its NC stretching mode were investigated using FTIR and femtosecond IR pump-probe spectroscopy. It is found that the NC stretching mode is very sensitive to the hydrogen-bonding ability of solvent molecules. Moreover, its transition dipole strength is larger than that of nitrile (CN) in nitrile-derivatized IR probe 2. The vibrational lifetime of the NC stretching mode is found to be 5.5 ± 0.2 ps in both D2O and DMF solvents, which is several times longer than that of the azido (N3) stretching mode in azido-derivatized IR probe 3. Altogether these properties suggest that the NC group can be a very promising sensing moiety of IR probes for studying the solvation structure and dynamics of biomolecules.

A bioavailable cathepsin S nitrile inhibitor abrogates tumor development.

Science.gov (United States)

Wilkinson, Richard D A; Young, Andrew; Burden, Roberta E; Williams, Rich; Scott, Christopher J

2016-04-21

Cathepsin S has been implicated in a variety of malignancies with genetic ablation studies demonstrating a key role in tumor invasion and neo-angiogenesis. Thus, the application of cathepsin S inhibitors may have clinical utility in the treatment of cancer. In this investigation, we applied a cell-permeable dipeptidyl nitrile inhibitor of cathepsin S, originally developed to target cathepsin S in inflammatory diseases, in both in vitro and in vivo tumor models. Validation of cathepsin S selectivity was carried out by assaying fluorogenic substrate turnover using recombinant cathepsin protease. Complete kinetic analysis was carried out and true K i values calculated. Abrogation of tumour invasion using murine MC38 and human MCF7 cell lines were carried out in vitro using a transwell migration assay. Effect on endothelial tube formation was evaluated using primary HUVEC cells. The effect of inhibitor in vivo on MC38 and MCF7 tumor progression was evaluated using cells propagated in C57BL/6 and BALB/c mice respectively. Subsequent immunohistochemical staining of proliferation (Ki67) and apoptosis (TUNEL) was carried out on MCF7 tumors. We confirmed that this inhibitor was able to selectively target cathepsin S over family members K, V, L and B. The inhibitor also significantly reduced MC38 and MCF7 cell invasion and furthermore, significantly reduced HUVEC endothelial tubule formation in vitro. In vivo analysis revealed that the compound could significantly reduce tumor volume in murine MC38 syngeneic and MCF7 xenograft models. Immunohistochemical analysis of MCF7 tumors revealed cathepsin S inhibitor treatment significantly reduced proliferation and increased apoptosis. In summary, these results highlight the characterisation of this nitrile cathepsin S inhibitor using in vitro and in vivo tumor models, presenting a compound which may be used to further dissect the role of cathepsin S in cancer progression and may hold therapeutic potential.

Carboxylated nitrile butadiene rubber/hybrid filler composites

Directory of Open Access Journals (Sweden)

Ahmad Mousa

2012-08-01

Full Text Available The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH. Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR of the composites. The degree of curing ΔM (maximum torque-minimum torque as a function of hybrid filler as derived from moving die rheometer (MDR is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM.

Nitrile functionalized silyl ether with dissolved LiTFSI as new electrolyte solvent for lithium-ion batteries

International Nuclear Information System (INIS)

Pohl, Benjamin; Grünebaum, Mariano; Drews, Mathias; Passerini, Stefano; Winter, Martin; Wiemhöfer, Hans‑Dieter

2015-01-01

Highlights: • A new electrolyte based on a nitrile-silyl ether solvent and LiTFSI as lithium salt was successfully tested. • This electrolyte shows higher ionic conductivities as compared to earlier published silicon based solvents. • Due to the absence of ether groups, the electrochemical stability is extended to 5.4 V vs. Li/Li + . • With LiTFSI, the electrolyte can be cycled up to 4.15 V vs. Li/Li + without causing anodic aluminum dissolution. - Abstract: 3-((Trimethylsilyl) oxy) propionitrile is introduced as non-volatile solvent for lithium-ion battery electrolytes using LiTFSI as lithium salt. The thermal and chemical stability of the electrolytes offer an enhanced safety as compared to conventional volatile carbonate electrolytes. In cell tests, the investigated LiTFSI nitrile silyl ether electrolyte shows compatibility with LiFePO 4 , LiNi 0.33 Mn 0.33 Co 0.33 O 2 and graphite active materials.

Preparation and characterization of electrospun poly(phthalazinone ether nitrile ketone) membrane with novel thermally stable properties

Energy Technology Data Exchange (ETDEWEB)

Wang, Gang; Zhang, Hao; Qian, Bingqing [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China); Wang, Jinyan, E-mail: wangjinyan@dlut.edu.cn [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Jian, Xigao [Department of Polymer Science and Materials, Dalian University of Technology, Dalian 116024 (China); Qiu, Jieshan, E-mail: jqiu@dlut.edu.cn [Carbon Research Laboratory, Liaoning Key Lab for Energy Materials and Chemical Engineering, State Key Lab of Fine Chemicals, Dalian University of Technology, Dalian 116024 (China)

2015-10-01

Highlights: • Poly (phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. • Electrospun membrane exhibits a good thermostability. • Electrospun membrane. - Abstract: Electrospun nanofibrous membranes have several applications because of their excellent properties, such as high porosity, small fiber diameter, and large surface area. However, high-temperature resistant electrospun membranes remain a challenge because of the absence of precursors that offer spinnability, scalability, and superior thermal stability. In this study, poly(phthalazinone ether nitrile ketone) (PPENK) was used to successfully prepare nanofiber membranes by electrospinning. Electrospun PPENK membranes were characterized by scanning electron microscopy, differential scanning calorimetry, Fourier transform infrared spectroscopy, and tensile stress–strain tests. Results indicated that the prepared electrospun membranes had a very high glass transition temperature, superior chemical resistance, and excellent mechanical strength. These desirable properties broaden their potential application in membranes and treatment of various hot fluid streams without strict temperature control.

Actinide gas-phase chemistry: Reactions of An+ and AnO+ [An = Th, U, Np, Pu, Am] with nitriles and butylamine

International Nuclear Information System (INIS)

Gibson, J.K.

1999-01-01

Laser ablation with prompt reaction and detection was applied to study gas-phase reactions of actinide ions, An + and AnO + [An = Th, U, Pu, Np, Am], with nitriles and butylamine; Tb and Tm were included for comparison. Particular emphasis was on Np and Am as this is the region of the An series where a transition to Ln-like character is manifested. A goal was to assess the role of the coordinating N: site on actinide ion-molecule interactions. The results for the nitriles were generally reminiscent of those for reactions with alkenes and the inert character of Pu + and Am + with regard to dehydrogenation, despite adduct formation, indicated that Csingle bondH activation requires two non-5f electrons to produce a Csingle bondAn + single bondH complex. With the butyronitriles and valeronitrile, Am + produced AmC 2 H 4 + , possibly via an ion/dipole interaction. Most MO + exhibited only adduct formation with the nitriles although ThO + was distinctively reactive, consistent with a description of Th as a quasi-d-block element. Both Np + and Tb + were substantially effective at dehydrogenating butylamine and Am + exhibited a lesser degree of reactivity. Reactions of the MO + , TbO + , NpO + , and AmO + with butylamine revealed a dramatic effect of oxoligation: AmO + was at least as reactive as TbO + and NpO + . It is postulated that the MO + reactions proceeded via a multicentered intermediate without insertion into a C-H bond. Bis-complexes were produced with nitriles and butylamine, attesting to strong complexation with the :N functionality. An ancillary discovery was Am 2 ± An dimers/clusters should elucidate the nature of actinide intermetallic bonding, including the role of 5f electrons

INFRARED SPECTRA AND OPTICAL CONSTANTS OF NITRILE ICES RELEVANT TO TITAN's ATMOSPHERE

International Nuclear Information System (INIS)

Moore, Marla H.; Hudson, Reggie; Ferrante, Robert F.; James Moore, W.

2010-01-01

Spectra and optical constants of nitrile ices known or suspected to be in Titan's atmosphere are presented from 2.0 to 333.3 μm (∼5000-30 cm -1 ). These results are relevant to the ongoing modeling of Cassini CIRS observations of Titan's winter pole. Ices studied are: HCN, hydrogen cyanide; C 2 N 2 , cyanogen; CH 3 CN, acetonitrile; C 2 H 5 CN, propionitrile; and HC 3 N, cyanoacetylene. For each of these molecules, we also report new cryogenic measurements of the real refractive index, n, determined in both the amorphous and crystalline phases at 670 nm. These new values have been incorporated into our optical constant calculations. Spectra were measured and optical constants were calculated for each nitrile at a variety of temperatures, including, but not limited to, 20, 35, 50, 75, 95, and 110 K, in both the amorphous phase and the crystalline phase. This laboratory effort used a dedicated FTIR spectrometer to record transmission spectra of thin-film ice samples. Laser interference was used to measure film thickness during condensation onto a transparent cold window attached to the tail section of a closed-cycle helium cryostat. Optical constants, real (n) and imaginary (k) refractive indices, were determined using Kramers-Kronig analysis. Our calculation reproduces the complete spectrum, including all interference effects.

Stereoselective synthesis of the Halaven C14-C26 fragment from D-quinic acid: crystallization-induced diastereoselective transformation of an α-methyl nitrile.

Science.gov (United States)

Belanger, Francis; Chase, Charles E; Endo, Atsushi; Fang, Francis G; Li, Jing; Mathieu, Steven R; Wilcoxen, Annie Z; Zhang, Huiming

2015-04-20

Crystallization-induced diastereoselective transformation (CIDT) of an α-methyl nitrile completes an entirely non-chromatographic synthesis of the halichondrin B C14-C26 stereochemical array. The requisite α-methyl nitrile substrate is derived from D-quinic acid through a series of substrate-controlled stereoselective reactions via a number of crystalline intermediates that benefit from a rigid polycyclic template. Therefore, all four stereogenic centers in the Halaven C14-C26 fragment were derived from the single chiral source D-quinic acid. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Synthesis of benzimidazoles by potassium tert-butoxide-promoted intermolecular cyclization reaction of 2-iodoanilines with nitriles.

Science.gov (United States)

Xiang, Shi-Kai; Tan, Wen; Zhang, Dong-Xue; Tian, Xian-Li; Feng, Chun; Wang, Bi-Qin; Zhao, Ke-Qing; Hu, Ping; Yang, Hua

2013-11-14

The synthesis of benzimidazoles by intermolecular cyclization reaction of 2-iodoanilines with nitriles has been developed. These reactions proceeded without the aid of any transition metals or ligands and just using KOBu(t) as the base. A variety of substituted benzimidazole derivatives can be synthesized by the approach.

A Proton-Switchable Bifunctional Ruthenium Complex That Catalyzes Nitrile Hydroboration.

Science.gov (United States)

Geri, Jacob B; Szymczak, Nathaniel K

2015-10-14

A new bifunctional pincer ligand framework bearing pendent proton-responsive hydroxyl groups was prepared and metalated with Ru(II) and subsequently isolated in four discrete protonation states. Stoichiometric reactions with H2 and HBPin showed facile E-H (E = H or BPin) activation across a Ru(II)-O bond, providing access to unusual Ru-H species with strong interactions with neighboring proton and boron atoms. These complexes were found to promote the catalytic hydroboration of ketones and nitriles under mild conditions, and the activity was highly dependent on the ligand's protonation state. Mechanistic experiments revealed a crucial role of the pendent hydroxyl groups for catalytic activity.

Energy Storage of Polyarylene Ether Nitriles at High Temperature

Science.gov (United States)

Tang, Xiaohe; You, Yong; Mao, Hua; Li, Kui; Wei, Renbo; Liu, Xiaobo

2018-03-01

Polyarylene ether nitrile (PEN) was synthesized and used as film capacitors for energy storage at high temperature. Scanning electron microscopy observation indicated that the films of PEN have pinholes at nanoscales which restricted the energy storage properties of the material. The pinhole shadowing effect through which the energy storage properties of PEN were effectively improved to be 2.3 J/cm3 was observed by using the overlapped film of PEN. The high glass transition temperature (T g) of PEN was as high as 216 °C and PEN film showed stable dielectric constant, breakdown strength and energy storage density before the T g. The PEN films will be a potential candidate as high performance electronic storage materials used at high temperature.

Is the tungsten(IV complex (NEt42[WO(mnt2] a functional analogue of acetylene hydratase?

Directory of Open Access Journals (Sweden)

Matthias Schreyer

2017-11-01

Full Text Available The tungsten(IV complex (Et4N2[W(O(mnt2] (1; mnt = maleonitriledithiolate was proposed (Sarkar et al., J. Am. Chem. Soc. 1997, 119, 4315 to be a functional analogue of the active center of the enzyme acetylene hydratase from Pelobacter acetylenicus, which hydrates acetylene (ethyne; 2 to acetaldehyde (ethanal; 3. In the absence of a satisfactory mechanistic proposal for the hydration reaction, we considered the possibility of a metal–vinylidene type activation mode, as it is well established for ruthenium-based alkyne hydration catalysts with anti-Markovnikov regioselectivity. To validate the hypothesis, the regioselectivity of tungsten-catalyzed alkyne hydration of a terminal, higher alkyne had to be determined. However, complex 1 was not a competent catalyst for the hydration of 1-octyne under the conditions tested. Furthermore, we could not observe the earlier reported hydration activity of complex 1 towards acetylene. A critical assessment of, and a possible explanation for the earlier reported results are offered. The title question is answered with "no".

Melamine-Schiff base/manganese complex with denritic structure: An efficient catalyst for oxidation of alcohols and one-pot synthesis of nitriles.

Science.gov (United States)

Kazemnejadi, Milad; Nikookar, Mahsa; Mohammadi, Mohammad; Shakeri, Alireza; Esmaeilpour, Mohsen

2018-05-18

Efficient and selective oxidation of alcohol to the corresponding carbonyl and/or nitrile was carried out by a new water-soluble melamine-based dendritic Mn(III) complex (Melamine-Mn (III)-Schiff base complex) in the presence of 2,4,6-trichloro-1,3,5-triazine (TCT) and O 2 at room temperature. Also, the oxidation of amine to the corresponding nitrile with high selectivity and conversion was performed at room temperature using the current method and high amounts of turnover frequencies (TOFs) were obtained for reactions. This system was also applicable for direct preparation of oxime through oxidation of alcohol. The catalyst was characterized by Fourier-transform infrared (FTIR), ultraviolet-visible (UV-Vis), thermogravimetric analysis (TGA), energy-dispersive X-ray (EDX), X-ray photoelectron spectroscopy (XPS), CHN and inductively coupled plasma (ICP) analyses. Also, oxidation/reduction behavior of the catalyst was studied by cyclic voltammetry (CV). Moreover, chemoselectivity of the catalyst was discussed with various combinations. The water-soluble catalyst could be recycled from the reaction mixture and reused for several times with a very low losing in efficiency. The recovered catalyst was also investigated with various analyses. Finally, gram scale preparation of nitrile was evaluated by present method. Copyright © 2018 Elsevier Inc. All rights reserved.

D-π-A Compounds with Tunable Intramolecular Charge Transfer Achieved by Incorporation of Butenolide Nitriles as Acceptor Moieties

DEFF Research Database (Denmark)

Moreno-Yruela, Carlos; Garín, Javier; Orduna, Jesús

2015-01-01

Chromophores where a polyenic spacer separates a 4H-pyranylidene or benzothiazolylidene donor and three different butenolide nitriles have been synthesized and characterized. The role of 2(5H)-furanones as acceptor units on the polarization and the second-order nonlinear (NLO) properties has been...

A facile one-pot synthesis of ruthenium hydroxide nanoparticles on magnetic silica: Aqueous hydration of nitriles to amides

Science.gov (United States)

One-pot synthesis of ruthenium hydroxide nanoparticles on magnetic silica is described which involve the in situ generation of magnetic silica (Fe3O4@ SiO2) and ruthenium hydroxide immobilization; the hydration of nitriles occurs in high yield and excellent selectivity using this...

Tetraoxane-pyrimidine nitrile hybrids as dual stage antimalarials.

Science.gov (United States)

Oliveira, Rudi; Guedes, Rita C; Meireles, Patrícia; Albuquerque, Inês S; Gonçalves, Lídia M; Pires, Elisabete; Bronze, Maria Rosário; Gut, Jiri; Rosenthal, Philip J; Prudêncio, Miguel; Moreira, Rui; O'Neill, Paul M; Lopes, Francisca

2014-06-12

The use of artemisinin or other endoperoxides in combination with other drugs is a strategy to prevent development of resistant strains of Plasmodium parasites. Our previous work demonstrated that hybrid compounds, comprising endoperoxides and vinyl sulfones, were capable of high activity profiles comparable to artemisinin and chloroquine while acting through two distinct mechanisms of action: oxidative stress and falcipain inhibition. In this study, we adapted this approach to a novel class of falcipain inhibitors: peptidomimetic pyrimidine nitriles. Pyrimidine tetraoxane hybrids displayed potent nanomolar activity against three strains of Plasmodium falciparum and falcipain-2, combined with low cytotoxicity. In vivo, a decrease in parasitemia and an increase in survival of mice infected with Plasmodium berghei was observed when compared to control. All tested compounds combined good blood stage activity with significant effects on liver stage parasitemia, a most welcome feature for any new class of antimalarial drug.

Wear testing and finite element analysis of nitrile rubber (NBR) hand pump seals

OpenAIRE

Alkadhimi, Fadel

2015-01-01

The use of Nitrile Butadiene Rubber NBR as seal in machines has increased in recent years. NBR is considered as the standard material for sealing and NBR owes its many applications to a range of special mechanical properties. However, the non-linear mechanical properties and incompressible behaviour of NBR make the analysis of NBR very difficult. The literature review highlighted the fact that the most common technical cause of hand pump failures was the wear of the piston seals. The contact ...

Cu/Nitroxyl Catalyzed Aerobic Oxidation of Primary Amines into Nitriles at Room Temperature

OpenAIRE

Kim, Jinho; Stahl, Shannon S.

2013-01-01

An efficient catalytic method has been developed for aerobic oxidation of primary amines to the corresponding nitriles. The reactions proceed at room temperature and employ a catalyst consisting of (4,4′-tBu2bpy)CuI/ABNO (ABNO = 9-azabicyclo[3.3.1]nonan-3-one N-oxyl). The reactions exhibit excellent functional group compatibility and substrate scope, and are effective with benzylic, allylic and aliphatic amines. Preliminary mechanistic studies suggest that aerobic oxidation of the Cu catalyst...

Macromolecular surface design: photopatterning of functional stable nitrile oxides.

Science.gov (United States)

Altintas, Ozcan; Glassner, Mathias; Rodriguez-Emmenegger, Cesar; Welle, Alexander; Trouillet, Vanessa; Barner-Kowollik, Christopher

2015-05-04

The efficient trapping of photogenerated thioaldehydes with functional shelf-stable nitrile oxides in a 1,3-dipolar cycloaddition is a novel and versatile photochemical strategy for polymer end-group functionalization and surface modification under mild and equimolar conditions. The modular ligation in solution was followed in detail by electrospray ionization mass spectrometry (ESI-MS). X-ray photoelectron spectroscopy (XPS) was employed to analyze the functionalized surfaces, whereas time-of-flight secondary-ion mass spectrometry (ToF-SIMS) confirmed the spatial control of the surface functionalization using a micropatterned shadow mask. Polymer brushes were grown from the surface in a spatially confined regime by surface-initiated atom transfer radical polymerization (SI-ATRP) as confirmed by TOF-SIMS, XPS as well as ellipsometry. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[3 + 2]-Cycloadditions of nitrile ylides after photoactivation of vinyl azides under flow conditions

Directory of Open Access Journals (Sweden)

Stephan Cludius-Brandt

2013-08-01

Full Text Available The photodenitrogenation of vinyl azides to 2H-azirines by using a photoflow reactor is reported and compared with thermal formation of 2H-azirines. Photochemically, the ring of the 2H-azirines was opened to yield the nitrile ylides, which underwent a [3 + 2]-cycloaddition with 1,3-dipolarophiles. When diisopropyl azodicarboxylate serves as the dipolarophile, 1,3,4-triazoles become directly accessible starting from the corresponding vinyl azide.

Prebiotic synthesis of 2-deoxy-d-ribose from interstellar building blocks promoted by amino esters or amino nitriles.

Science.gov (United States)

Steer, Andrew M; Bia, Nicolas; Smith, David K; Clarke, Paul A

2017-09-25

Understanding the prebiotic genesis of 2-deoxy-d-ribose, which forms the backbone of DNA, is of crucial importance to unravelling the origins of life, yet remains open to debate. Here we demonstrate that 20 mol% of proteinogenic amino esters promote the selective formation of 2-deoxy-d-ribose over 2-deoxy-d-threopentose in combined yields of ≥4%. We also demonstrate the first aldol reaction promoted by prebiotically-relevant proteinogenic amino nitriles (20 mol%) for the enantioselective synthesis of d-glyceraldehyde with 6% ee, and its subsequent conversion into 2-deoxy-d-ribose in yields of ≥ 5%. Finally, we explore the combination of these two steps in a one-pot process using 20 mol% of an amino ester or amino nitrile promoter. It is hence demonstrated that three interstellar starting materials, when mixed together with an appropriate promoter, can directly lead to the formation of a mixture of higher carbohydrates, including 2-deoxy-d-ribose.

The glycolytic shift in fumarate-hydratase-deficient kidney cancer lowers AMPK levels, increases anabolic propensities and lowers cellular iron levels

KAUST Repository

Tong, Winghang; Sourbier, Carole; Kovtunovych, Gennadiy; Jeong, Suhyoung; Vira, Manish A.; Ghosh, Manik Chandra; Romero, Vladimir Valera; Sougrat, Rachid; Vaulont, Sophie; Viollet, Benoî t; Kim, Yeongsang; Lee, Sunmin; Trepel, Jane B.; Srinivasan, Ramaprasad; Bratslavsky, Gennady; Yang, Youfeng; Linehan, William Marston; Rouault, Tracey A.

2011-01-01

Inactivation of the TCA cycle enzyme, fumarate hydratase (FH), drives a metabolic shift to aerobic glycolysis in FH-deficient kidney tumors and cell lines from patients with hereditary leiomyomatosis renal cell cancer (HLRCC), resulting in decreased levels of AMP-activated kinase (AMPK) and p53 tumor suppressor, and activation of the anabolic factors, acetyl-CoA carboxylase and ribosomal protein S6. Reduced AMPK levels lead to diminished expression of the DMT1 iron transporter, and the resulting cytosolic iron deficiency activates the iron regulatory proteins, IRP1 and IRP2, and increases expression of the hypoxia inducible factor HIF-1α, but not HIF-2α. Silencing of HIF-1α or activation of AMPK diminishes invasive activities, indicating that alterations of HIF-1α and AMPK contribute to the oncogenic growth of FH-deficient cells. © 2011 Elsevier Inc.

The glycolytic shift in fumarate-hydratase-deficient kidney cancer lowers AMPK levels, increases anabolic propensities and lowers cellular iron levels

KAUST Repository

Tong, Winghang

2011-09-01

Inactivation of the TCA cycle enzyme, fumarate hydratase (FH), drives a metabolic shift to aerobic glycolysis in FH-deficient kidney tumors and cell lines from patients with hereditary leiomyomatosis renal cell cancer (HLRCC), resulting in decreased levels of AMP-activated kinase (AMPK) and p53 tumor suppressor, and activation of the anabolic factors, acetyl-CoA carboxylase and ribosomal protein S6. Reduced AMPK levels lead to diminished expression of the DMT1 iron transporter, and the resulting cytosolic iron deficiency activates the iron regulatory proteins, IRP1 and IRP2, and increases expression of the hypoxia inducible factor HIF-1α, but not HIF-2α. Silencing of HIF-1α or activation of AMPK diminishes invasive activities, indicating that alterations of HIF-1α and AMPK contribute to the oncogenic growth of FH-deficient cells. © 2011 Elsevier Inc.

Spin trapping of cyanoalkyl radicals in the liquid phase γ radiolysis of nitriles

International Nuclear Information System (INIS)

Mao, S.W.; Kevan, L.

1976-01-01

The following radicals have been identified in the liquid phase γ radiolysis of several nitriles by spin trapping with phenyl tert-butyl nitrone: CH 2 CN in acetonitrile, H and CH 3 CHCN(question) in propionitrile, CH(CN) 2 in malononitrile, and H, CN, and CH 2 CH 2 CN in succinonitrile. γ proton splittings are observed for the CH 2 CN and CH(CH) 2 spin adducts. The results are discussed in comparison with solid phase radiolysis data and with alkyl radical spin adduct splittings

Cu/Nitroxyl Catalyzed Aerobic Oxidation of Primary Amines into Nitriles at Room Temperature.

Science.gov (United States)

Kim, Jinho; Stahl, Shannon S

2013-07-05

An efficient catalytic method has been developed for aerobic oxidation of primary amines to the corresponding nitriles. The reactions proceed at room temperature and employ a catalyst consisting of (4,4'- t Bu 2 bpy)CuI/ABNO (ABNO = 9-azabicyclo[3.3.1]nonan-3-one N -oxyl). The reactions exhibit excellent functional group compatibility and substrate scope, and are effective with benzylic, allylic and aliphatic amines. Preliminary mechanistic studies suggest that aerobic oxidation of the Cu catalyst is the turnover-limiting step of the reaction.

Remote Stereoinductive Intramolecular Nitrile Oxide Cycloaddition: Asymmetric Total Synthesis and Structure Revision of (-)-11β-Hydroxycurvularin.

Science.gov (United States)

Choe, Hyeonjeong; Pham, Thuy Trang; Lee, Joo Yun; Latif, Muhammad; Park, Haeil; Kang, Young Kee; Lee, Jongkook

2016-03-18

The first total synthesis and structure revision of (-)-11β-hydroxycurvularin (1b), a macrolide possessing a β-hydroxyketone moiety, were accomplished. The β-hydroxyketone moiety in this natural product was introduced by cleavage of the N-O bond in an isoxazoline ring that was formed diastereoselectively in a 1,5-remote stereocontrolled fashion by employing intramolecular nitrile oxide cycloaddition.

Chiral Cu(II-catalyzed enantioselective β-borylation of α,β-unsaturated nitriles in water

Directory of Open Access Journals (Sweden)

Lei Zhu

2015-10-01

Full Text Available The promising performance of copper(II complexes was demonstrated for asymmetric boron conjugate addition to α,β-unsaturated nitriles in water. The catalyst system, which consisted of Cu(OAc2 and a chiral 2,2′-bipyridine ligand, enabled β-borylation and chiral induction in water. Subsequent protonation, which was accelerated in aqueous medium, led to high activity of this asymmetric catalysis. Both solid and liquid substrates were suitable despite being insoluble in water.

Do clinical examination gloves provide adequate electrical insulation for safe hands-on defibrillation? I: Resistive properties of nitrile gloves.

Science.gov (United States)

Deakin, Charles D; Lee-Shrewsbury, Victoria; Hogg, Kitwani; Petley, Graham W

2013-07-01

Uninterrupted chest compressions are a key factor in determining resuscitation success. Interruptions to chest compression are often associated with defibrillation, particularly the need to stand clear from the patient during defibrillation. It has been suggested that clinical examination gloves may provide adequate electrical resistance to enable safe hands-on defibrillation in order to minimise interruptions. We therefore examined whether commonly used nitrile clinical examination gloves provide adequate resistance to current flow to enable safe hands-on defibrillation. Clinical examination gloves (Kimberly Clark KC300 Sterling nitrile) worn by members of hospital cardiac arrest teams were collected immediately following termination of resuscitation. To determine the level of protection afforded by visually intact gloves, electrical resistance across the glove was measured by applying a DC voltage across the glove and measuring subsequent resistance. Forty new unused gloves (control) were compared with 28 clinical (non-CPR) gloves and 128 clinical (CPR) gloves. One glove in each group had a visible tear and was excluded from analysis. Control gloves had a minimum resistance of 120 kΩ (median 190 kΩ) compared with 60 kΩ in clinical gloves (both CPR (median 140 kΩ) and non-CPR groups (median 160 kΩ)). Nitrile clinical examination gloves do not provide adequate electrical insulation for the rescuer to safely undertake 'hands-on' defibrillation and when exposed to the physical forces of external chest compression, even greater resistive degradation occurs. Further work is required to identify gloves suitable for safe use for 'hands-on' defibrillation. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Compositional analysis of nitrile terminated poly(propylene imine) dendrimers by high-performance liquid chromatography combined with electrospray mass spectrometry

NARCIS (Netherlands)

van der Wal, S; Mengerink, Y; Brackman, JC; de Brabander, EMM; Jeronimus-Stratingh, CM; Bruins, AP

1998-01-01

Separation methods for nitrile terminated poly(propylene imine) dendrimers were developed to monitor and optimize their large scale production. Detailed analyses of defects within a dendrimer generation were performed by HPLC at alkaline pH (sodium hydroxide) on a polymer-based column or at neutral

New small molecule inhibitors of histone methyl transferase DOT1L with a nitrile as a non-traditional replacement for heavy halogen atoms.

Science.gov (United States)

Spurr, Sophie S; Bayle, Elliott D; Yu, Wenyu; Li, Fengling; Tempel, Wolfram; Vedadi, Masoud; Schapira, Matthieu; Fish, Paul V

2016-09-15

A number of new nucleoside derivatives are disclosed as inhibitors of DOT1L activity. SARs established that DOT1L inhibition could be achieved through incorporation of polar groups and small heterocycles at the 5-position (5, 6, 12) or by the application of alternative nitrogenous bases (18). Based on these results, CN-SAH (19) was identified as a potent and selective inhibitor of DOT1L activity where the polar 5-nitrile group was shown by crystallography to bind in the hydrophobic pocket of DOT1L. In addition, we show that a polar nitrile group can be used as a non-traditional replacement for heavy halogen atoms. Copyright © 2016 Elsevier Ltd. All rights reserved.

Inhibition of enterovirus 71 replication by an α-hydroxy-nitrile derivative NK-1.9k.

Science.gov (United States)

Wang, Yaxin; Cao, Lin; Zhai, Yangyang; Ma, Jiaming; Nie, Quandeng; Li, Ting; Yin, Zheng; Sun, Yuna; Shang, Luqing

2017-05-01

Enterovirus 71 (EV71) is one of the major etiological agents of human hand-foot-and-mouth disease (HFMD) worldwide. EV71 infection in young children and people with immunodeficiency causes severe symptoms with a high fatality rates. However, there is still no approved drugs to treat such infections. Based on our previous report of a peptide-aldehyde anti-EV71 protease, we present here a highly specific α-hydroxy-nitrile derivative NK-1.9k, which inhibited the proliferation of multiple EV71 strains and coxsackievirus A16 (CVA16) in various cells with EC 50 of 37.0 nM with low cytotoxicity (CC 50  > 200 μM). The hydroxy-nitrile covalent warhead conferred NK-1.9k high potency and selectivity to interact with the cysteine residue of the active site of the viral protease. We also documented the resistance to NK-1.9k with a N69S mutation in EV71 3C pro . The combination of NK-1.9k and EV71 polymerase or entry inhibitors produced strong synergistic antiviral effects. Collectively, our findings suggest our compounds can potentially be developed as drugs for the treatment of HFMD. Copyright © 2017. Published by Elsevier B.V.

Improvement of Some Physical Properties of Loaded Nitrile Rubber Vulcanized by Ionizing Radiation

International Nuclear Information System (INIS)

Abdel-Aziz, M.M.; Basfar, A.A.; Mofti, S.

2000-01-01

The effect of four-selected polyfunctional compounds namely, tri methylacrylic ester, trimethylol propane trimethacrylate, zinc diacrylate and modified pentaerthritol triacrylate, as crosslinking agents, on the mechanical properties of radiation vulcanized nitrile rubber was studied. The effect of incorporation of either HAF-carbon black or fumed silica, as filler and reinforcing agents, on its mechanical properties was also studied. The co agent namely, tri methylacrylic ester, was found to produce a set of optimum mechanical properties, i.e. moderate crosslink density, good tensile strength and elasticity at low irradiation doses, i.e.40 kGy

Effect of multiple alcohol-based hand rub applications on the tensile properties of thirteen brands of medical exam nitrile and latex gloves.

Science.gov (United States)

Gao, Pengfei; Horvatin, Matthew; Niezgoda, George; Weible, Robyn; Shaffer, Ronald

2016-12-01

Current CDC guidance for the disinfection of gloved hands during the doffing of personal protective equipment (PPE) following the care of a patient with Ebola recommends for multiple applications of alcohol-based hand rub (ABHR) on medical exam gloves. To evaluate possible effects of ABHR applications on glove integrity, thirteen brands of nitrile and latex medical exam gloves from five manufacturers and two different ABHRs were included in this study. A pair of gloves were worn by a test operator and the outside surfaces of the gloves were separately treated with an ABHR for 1-6 applications. Tensile strength and ultimate elongation of the gloves without any ABHR treatments (control gloves) and gloves after 1-6 ABHR applications were measured based on the ASTM D412 standard method. In general, tensile strength decreased with each ABHR application. ABHRs had more effect on the tensile strength of the tested nitrile than latex gloves, while ethanol-based ABHR (EBHR) resulted in lesser changes in tensile strength compared to isopropanol-based ABHR (IBHR). The results show that multiple EBHR applications on the latex gloves and some of the nitrile gloves tested should be safe for Ebola PPE doffing based on the CDC guidance. Appropriate hospital staff practice using ABHR treatment and doffing gloves is recommended to become more familiar with changes in glove properties.

Chemical Resistance of Disposable Nitrile Gloves Exposed to Simulated Movement

Science.gov (United States)

Phalen, Robert N.; Wong, Weng Kee

2012-01-01

Large discrepancies between laboratory permeation testing and field exposures have been reported, with indications that hand movement could account for a portion of these differences. This study evaluated the influence of simulated movement on chemical permeation of 30 different disposable nitrile glove products. Products were investigated out-of-box and with exposure to simulated whole-glove movement. Permeation testing was conducted using ethanol as a surrogate test chemical. A previously designed pneumatic system was used to simulate hand movement. No movement and movement tests were matched-paired to control for environmental conditions, as were statistical analyses. Permeation data were collected for a 30-min exposure period or until a breakthrough time (BT) and steady-state permeation rate (SSPR) could be determined. A third parameter, area under the curve at 30 min (AUC-30), was used to estimate potential worker exposure. With movement, a significant decrease in BT (p ≤ 0.05), ranging from 6–33%, was observed for 28 products. The average decrease in BT was 18% (p ≤ 0.001). With movement, a significant increase in SSPR (p ≤ 0.05), ranging from 1–78%, was observed with 25 products. The average increase in SSPR was 18% (p ≤ 0.001). Significant increases in AUC-30 (p ≤ 0.05), ranging from 23–277%, were also observed for all products where it could be calculated. On average, there was a 58% increase (p ≤ 0.001). The overall effect of movement on permeation through disposable nitrile gloves was significant. Simulated movement significantly shortened the BT, increased the SSPR, and increased the cumulative 30-min exposure up to three times. Product variability also accounted for large differences, up to 40 times, in permeation and cumulative exposure. Glove selection must take these factors into account. It cannot be assumed that all products will perform in a similar manner. PMID:23009187

Palladium-catalyzed meta-selective C-H bond activation with a nitrile-containing template: computational study on mechanism and origins of selectivity.

Science.gov (United States)

Yang, Yun-Fang; Cheng, Gui-Juan; Liu, Peng; Leow, Dasheng; Sun, Tian-Yu; Chen, Ping; Zhang, Xinhao; Yu, Jin-Quan; Wu, Yun-Dong; Houk, K N

2014-01-08

Density functional theory investigations have elucidated the mechanism and origins of meta-regioselectivity of Pd(II)-catalyzed C-H olefinations of toluene derivatives that employ a nitrile-containing template. The reaction proceeds through four major steps: C-H activation, alkene insertion, β-hydride elimination, and reductive elimination. The C-H activation step, which proceeds via a concerted metalation-deprotonation (CMD) pathway, is found to be the rate- and regioselectivity-determining step. For the crucial C-H activation, four possible active catalytic species-monomeric Pd(OAc)2, dimeric Pd2(OAc)4, heterodimeric PdAg(OAc)3, and trimeric Pd3(OAc)6-have been investigated. The computations indicated that the C-H activation with the nitrile-containing template occurs via a Pd-Ag heterodimeric transition state. The nitrile directing group coordinates with Ag while the Pd is placed adjacent to the meta-C-H bond in the transition state, leading to the observed high meta-selectivity. The Pd2(OAc)4 dimeric mechanism also leads to the meta-C-H activation product but with higher activation energies than the Pd-Ag heterodimeric mechanism. The Pd monomeric and trimeric mechanisms require much higher activation free energies and are predicted to give ortho products. Structural and distortion energy analysis of the transition states revealed significant effects of distortions of the template on mechanism and regioselectivity, which provided hints for further developments of new templates.

The anomalous substituent effect of the ethyl group in the 13 C NMR and IR data of some aliphatic nitriles

International Nuclear Information System (INIS)

Garcia, Janaina C.; Barbarini, Jose E.; Rittner, Roberto; Rocco, Silvana A.; Tormena, Claudio F.

1999-01-01

This work reports a full assignment of 13 C and 1 H chemical shifts for some aliphatic nitriles from acetonitrile to octanonitrile and the observed shieldings for the carbon cyano group are correlated with the ν CN and with the electronic and steric parameters

Positron annihilation analysis of epoxy/hydroxyl terminated butyl nitrile rubber (EP/HTBN) system

International Nuclear Information System (INIS)

Zeng Minfeng; Chen Ning; Ji Genzhong; Sun Xudong; Zhao Rener; Xiao Huiquan; Qi Chenze; Wang Baoyi

2007-01-01

The free volume properties of epoxy/hydroxyl terminated butyl nitrile rubber (EP/HTBN) have been studied by means of positron annihilation technique. The toughness effect is found to be correlated with the content of HTBN and the free volume properties of the EP/HTBN interfaces. When the content of HTBN component is 5%, the free volume size in the interface is close to that of EP, and the toughness effect is strong. But with further addition of HTBN, holes with big size free volume are formed in the interface, and the toughness effect is limited. (authors)

Pengaruh penggunaan nitril butadiene rubber dan pale crepe pada pembuatan sol karet untuk sepatu pengaman

Directory of Open Access Journals (Sweden)

Arum Yuniari

2010-06-01

Full Text Available Abstract Rubber sole for safety shoes was different on physical specification with general sole, especially on abrasion resistance and oil resistance. The objective of the study was to determine the effect of nitril butadiene rubber and pale crepe on physical properties of vulcanized rubber sole for safety shoes. Rubber sole for safety shoes was produced by blending pale crepe and nitril butadiene rubber with ratio of : 50/50; 60/40; 70/30 and 80/20 phr, respectively. Carbon black as filler was also variated with, 40 ; 50 and 60 phr. Compounding processing used two roll mill machine and vulcanized rubber sole was by using pressed use hydraulic press machine. The results showed that vulcanized rubber sole for safety shoes with good quality consist of pale crepe and NBR 80/20 phr and carbon black 40 phr, which was characterized by tensile strength 16.81 N/mm2, tear strength 11.68 N/mm, density 1.12 g/cm3, abrasion resistance 58.51 mm3, hardness 71.60 shore A, resistance to cut growth 30.000 times was 1.15 mm and oil resistance 65.44%, respectively. The quality parameters was complied with standard quality of SNI 0111 : 2009, for safety shoes from leather and vulcanized rubber sole that fulfill oil reistance parameter.

Nitrile-hydrolyzing enzyme from Meyerozyma guilliermondii and its potential in biosynthesis of 3-hydroxypropionic acid.

Science.gov (United States)

Zhang, Qiang; Gong, Jin-Song; Dong, Ting-Ting; Liu, Ting-Ting; Li, Heng; Dou, Wen-Fang; Lu, Zhen-Ming; Shi, Jin-Song; Xu, Zheng-Hong

2017-06-01

3-Hydroxypropionic acid (3-HP) is an important platform chemical in organic synthesis. Traditionally, 3-HP was produced by chemical methods and fermentation process. In this work, a novel enzymatic method was developed for green synthesis of 3-HP. A yeast strain harboring nitrile-hydrolyzing enzyme was newly isolated from environmental samples using 3-hydroxypropionitrile (3-HPN) as the sole nitrogen source. It was identified to be Meyerozyma guilliermondii CGMCC12935 by sequencing of the 18S ribosomal DNA and internal transcribed spacer, together with analysis of the morphology characteristics. The catalytic properties of M. guilliermondii CGMCC12935 resting cells were determined, and the optimum activity was achieved at 55 °C and pH 7.5. The enzyme showed broad substrate specificity towards nitriles, especially 3-HPN, aminoacetonitrile and 3-cyanopyridine. The presence of Ag + , Pb 2+ and excess substrate inhibited the enzyme activity, whereas 5% (v/v) ethyl acetate had a positive effect on the enzyme activity. M. guilliermondii CGMCC12935 resting cells by addition of 3% glucose could thoroughly hydrolyze 500 mM 3-HPN into 3-HP within 100 h and the maximal accumulative production of 3-HP reached 216.33 mM, which was over twofolds than the control group with no additional glucose. And this work would lay the foundation for biological production of 3-HP in industry.

Laboratory investigation of nitrile ices of Titan's stratospheric clouds

Science.gov (United States)

Nna Mvondo, D.; Anderson, C. M.; McLain, J. L.; Samuelson, R. E.

2017-09-01

Titan's mid to lower stratosphere contains complex cloud systems of numerous organic ice particles comprised of both hydrocarbon and nitrile compounds. Most of these stratospheric ice clouds form as a result of vapor condensation formation processes. However, there are additional ice emission features such as dicyanoacetylene (C4N2) and the 220 cm-1 ice emission feature (the "Haystack") that are difficult to explain since there are no observed vapor emission features associated with these ices. In our laboratory, using a high-vacuum chamber coupled to a FTIR spectrometer, we are engaged in a dedicated investigation of Titan's stratospheric ices to interpret and constrain Cassini Composite InfraRed Spectrometer (CIRS) far-IR data. We will present laboratory transmittance spectra obtained for propionitrile (CH3CH2CN), cyanogen (C2N2) and hydrogen cyanide (HCN) ices, as well as various combinations of their mixtures, to better understand the cloud chemistry occurring in Titan's stratosphere.

Nitrile versus isonitrile adsorption at interstellar grain surfaces. II. Carbonaceous aromatic surfaces

Science.gov (United States)

Bertin, M.; Doronin, M.; Michaut, X.; Philippe, L.; Markovits, A.; Fillion, J.-H.; Pauzat, F.; Ellinger, Y.; Guillemin, J.-C.

2017-12-01

Context. Almost 20% of the 200 different species detected in the interstellar and circumstellar media present a carbon atom linked to nitrogen by a triple bond. Of these 37 molecules, 30 are nitrile R-CN compounds, the remaining 7 belonging to the isonitrile R-NC family. How these species behave in their interactions with the grain surfaces is still an open question. Aims: In a previous work, we have investigated whether the difference between nitrile and isonitrile functional groups may induce differences in the adsorption energies of the related isomers at the surfaces of interstellar grains of various nature and morphologies. This study is a follow up of this work, where we focus on the adsorption on carbonaceous aromatic surfaces. Methods: The question is addressed by means of a concerted experimental and theoretical approach of the adsorption energies of CH3CN and CH3NC on the surface of graphite (with and without surface defects). The experimental determination of the molecule and surface interaction energies is carried out using temperature-programmed desorption in an ultra-high vacuum between 70 and 160 K. Theoretically, the question is addressed using first-principle periodic density functional theory to represent the organised solid support. Results: The adsorption energy of each compound is found to be very sensitive to the structural defects of the aromatic carbonaceous surface: these defects, expected to be present in a large numbers and great diversity on a realistic surface, significantly increase the average adsorption energies to more than 50% as compared to adsorption on perfect graphene planes. The most stable isomer (CH3CN) interacts more efficiently with the carbonaceous solid support than the higher energy isomer (CH3NC), however.

Synthesis and characterization of semi-crystalline polyarylene ether nitrile with AIEE feature

Science.gov (United States)

Wang, Pan; Li, Kui; Jia, Kun; Liu, Xiaobo

2017-12-01

An AIEgen 1, 2-di (4-hydroxyphenyl)-1, 2-diphenylethene (TPE-2OH) was introduced into the back bone of semi-crystalline poly arylene ether nitriles (PEN). The fluorescence spectra results indicated that the derived polymer displayed a typical aggregation-induced emission enhancement (AIEE) active with an emitting peak at ∼470 nm. Then the AIEE active PEN was prepared into films through casting method and realised strong fluorescence emission and excellent mechanics properties. Besides, the crystal AIEE active polymer shows sphere micro-morphology along with a strong blue emission. These findings will open a door for further research on the high performance semi-crystalline PEN at flexible display technology and optical sensors.

No evidence for promoter region methylation of the succinate dehydrogenase and fumarate hydratase tumour suppressor genes in breast cancer

Directory of Open Access Journals (Sweden)

Dobrovic Alexander

2009-09-01

Full Text Available Abstract Background Succinate dehydrogenase (SDH and fumarate hydratase (FH are tricarboxylic acid (TCA cycle enzymes that are also known to act as tumour suppressor genes. Increased succinate or fumarate levels as a consequence of SDH and FH deficiency inhibit hypoxia inducible factor-1α (HIF-1α prolyl hydroxylases leading to sustained HIF-1α expression in tumours. Since HIF-1α is frequently expressed in breast carcinomas, DNA methylation at the promoter regions of the SDHA, SDHB, SDHC and SDHD and FH genes was evaluated as a possible mechanism in silencing of SDH and FH expression in breast carcinomas. Findings No DNA methylation was identified in the promoter regions of the SDHA, SDHB, SDHC, SDHD and FH genes in 72 breast carcinomas and 10 breast cancer cell lines using methylation-sensitive high resolution melting which detects both homogeneous and heterogeneous methylation. Conclusion These results show that inactivation via DNA methylation of the promoter CpG islands of SDH and FH is unlikely to play a major role in sporadic breast carcinomas.

Nitrile-synthesizing enzyme: Screening, purification and characterization.

Science.gov (United States)

Kumano, Takuto; Suzuki, Takahisa; Shimizu, Sakayu; Kobayashi, Michihiko

2016-09-12

Cyanide is known as a toxic compound for almost all living organisms. We have searched for cyanide-resistant bacteria from the soil and stock culture collection of our laboratory, and have found the existence of a lot of microorganisms grown on culture media containing 10 mM potassium cyanide. Almost all of these cyanide-resistant bacteria were found to show β-cyano-L-alanine (β-CNAla) synthetic activity. β-CNAla synthase is known to catalyze nitrile synthesis: the formation of β-CNAla from potassium cyanide and O-acetyl-L-serine or L-cysteine. We found that some microorganisms were able to detoxify cyanide using O-methyl-DL-serine, O-phospho-L-serine and β-chloro-DL-alanine. In addition, we purified β-CNAla synthase from Pseudomonas ovalis No. 111 in nine steps, and characterized the purified enzyme. This enzyme has a molecular mass of 60,000 and appears to consist of two identical subunits. The purified enzyme exhibits a maximum activity at pH 8.5-9.0 at an optimal temperature of 40-50°C. The enzyme is specific for O-acetyl-L-serine and β-chloro-DL-alanine. The Km value for O-acetyl-L-serine is 10.0 mM and Vmax value is 3.57 μmol/min/mg.

Highly selective separation of carbon dioxide from nitrogen and methane by nitrile/glycol-difunctionalized ionic liquids in supported ionic liquid membranes (SILMs).

Science.gov (United States)

Hojniak, Sandra D; Silverwood, Ian P; Khan, Asim Laeeq; Vankelecom, Ivo F J; Dehaen, Wim; Kazarian, Sergei G; Binnemans, Koen

2014-07-03

Novel difunctionalized ionic liquids (ILs) containing a triethylene glycol monomethyl ether chain and a nitrile group on a pyrrolidinium or imidazolium cation have been synthesized and incorporated into supported ionic liquid membranes (SILMs). These ILs exhibit ca. 2.3 times higher CO2/N2 and CO2/CH4 gas separation selectivities than analogous ILs functionalized only with a glycol chain. Although the glycol moiety ensures room temperature liquidity of the pyrrolidinium and imidazolium ILs, the two classes of ILs benefit from the presence of a nitrile group in different ways. The difunctionalized pyrrolidinium ILs exhibit an increase in CO2 permeance, whereas the permeances of the contaminant gases rise negligibly, resulting in high gas separation selectivities. In the imidazolium ILs, the presence of a nitrile group does not always increase the CO2 permeance nor does it increase the CO2 solubility, as showed in situ by the ATR-FTIR spectroscopic method. High selectivity of these ILs is caused by the considerably reduced permeances of N2 and CH4, most likely due to the ability of the -CN group to reject the nonpolar contaminant gases. Apart from the CO2 solubility, IL-CO2 interactions and IL swelling were studied with the in situ ATR-FTIR spectroscopy. Different strengths of the IL-CO2 interactions were found to be the major difference between the two classes of ILs. The difunctionalized ILs interacted stronger with CO2 than the glycol-functionalized ILs, as manifested in the smaller bandwidths of the bending mode band of CO2 for the latter.

New strategy and easy fabrication of solid-state supercapacitor based on polypyrrole and nitrile rubber.

Science.gov (United States)

Lee, Sangyool; Lee, Youngkwan; Cho, Mi-Suk; Nam, Jae-Do

2008-09-01

Solid state redox supercapacitors were fabricated using a solid polymer electrolyte, nitrile butadiene rubber (NBR)-KCI and chemically deposited polypyrrole (PPy) as the conducting polymer electrodes on both surfaces of a NBR film. The optimal conditions for the preparation of the PPy/NBR electrode were confirmed as functions of the uptake of pyrrole monomer into the NBR matrix as well as the immersion time in an oxidant solution. The morphology of the PPy-NBR-KCI capacitor was observed using scanning electron microscopy. The performance of the capacitors was characterized using a galvanostatic charge-discharge technique.

Hydrolysis of Ibuprofen Nitrile and Ibuprofen Amide and Deracemisation of Ibuprofen Using Nocardia corallina B-276

OpenAIRE

Myrna Solís-Oba; Norberto Manjarrez; Aida Solís; Ricardo Lievano; Herminia Inés Pérez

2012-01-01

A novel application of whole cells of Nocardia corallina B-276 for the deracemisation of ibuprofen is reported. This microorganism successfully hydrolysed ibuprofen nitrile to ibuprofen amide, and ibuprofen amide to ibuprofen, using a suspension of cells in a potassium phosphate buffer solution (0.1 M, pH = 7.0). These results can be explained by the presence of NHase and amidase enzymes, but the reactions are not enantioselective and low ee values were obtained. However, (R)-ibuprofen was is...

High performance light-colored nitrile-butadiene rubber nanocomposites.

Science.gov (United States)

Lei, Yanda; Guo, Baochun; Chen, Feng; Zhu, Lixin; Zhou, Wenyou; Jia, Demin

2011-12-01

High mechanical performance nitrile-butadiene rubber (NBR) with light color was fabricated by the method of in situ formation of zinc disorbate (ZDS) or magnesium disorbate (MDS). The in situ formed ZDS and its polymerization via internal mixing was confirmed by X-ray diffaraction. The mechanical properties, ageing resistance, morphology and the dynamic mechanical analysis were fully studied. It was found that with increasing loading of metallic disorbate both the curing rate and the ionic crosslink density was largely increased. The modulus, tensile strength and tear strength were largely increased. With a comparison between internal mixing and opening mixing, the mechanical performance for the former one was obviously better than the latter one. The high performance was ascribed to the finely dispersion nano domains with irregular shape and obscure interfacial structures. Except for the NBR vulcanizate with a high loading of MDS, the others' ageing resistance with incorporation of these two metallic disorbate was found to be good. Dynamic mechanical analysis (DMA) showed that, with increasing loading of metallic disorbate, the highly increased storage modulus above -20 degrees C, the up-shifted glass transition temperature (Tg) and the reduced mechanical loss were ascribed to strengthened interfacial interactions.

Nitrilase enzymes and their role in plant–microbe interactions

Science.gov (United States)

Howden, Andrew J. M.; Preston, Gail M.

2009-01-01

Summary Nitrilase enzymes (nitrilases) catalyse the hydrolysis of nitrile compounds to the corresponding carboxylic acid and ammonia, and have a wide range of industrial and biotechnological applications, including the synthesis of industrially important carboxylic acids and bioremediation of cyanide and toxic nitriles. Nitrilases are produced by a wide range of organisms, including plants, bacteria and fungi, but despite their biotechnological importance, the role of these enzymes in living organisms is relatively underexplored. Current research suggests that nitrilases play important roles in a range of biological processes. In the context of plant–microbe interactions they may have roles in hormone synthesis, nutrient assimilation and detoxification of exogenous and endogenous nitriles. Nitrilases are produced by both plant pathogenic and plant growth‐promoting microorganisms, and their activities may have a significant impact on the outcome of plant–microbe interactions. In this paper we review current knowledge of the role of nitriles and nitrilases in plants and plant‐associated microorganisms, and discuss how greater understanding of the natural functions of nitrilases could be applied to benefit both industry and agriculture. PMID:21255276

Dramatic inversion of charge polarity in diketopyrrolopyrrole-based organic field-effect transistors via a simple nitrile group substitution.

Science.gov (United States)

Yun, Hui-Jun; Kang, Seok-Ju; Xu, Yong; Kim, Seul Ong; Kim, Yun-Hi; Noh, Yong-Young; Kwon, Soon-Ki

2014-11-19

A record-breaking high electron mobility of 7.0 cm(2) V(-1) s(-1) for n-channel polymer OFETs is reported. By the incorporation of only one nitrile group as an electron-withdrawing function in the vinyl linkage of the DPP-based copolymer, a dramatic inversion of majority charge-carriers from holes to electrons is achieved. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A molecular study of gas solubility in nitrile rubber

Science.gov (United States)

Khawaja, Musab; Mostofi, Arash; Sutton, Adrian

2015-03-01

One of the most important uses of elastomers in the oil industry is for seals to encase and protect sensitive monitoring equipment from contamination by gases and liquids at the high pressures and temperatures in the well. Failure of such seals sometimes occurs on decompression when they are returned to the surface. The conditions in the well lead to gases being absorbed by Nitrile rubber (NBR) seals. NBR exhibits a strong permselectivity towards CO2 compared to other gases; something attributed experimentally to the enhanced solubility of CO2. In this study an explanation is sought at the molecular level for this phenomenon. A series of molecular mechanics calculations are performed to compute solubilities of different gases in NBR. The effect of acrylonitrile content on their solubilities is studied for the first time by simulation, and we discuss the important issue of convergence with respect to the sampling of different elastomer configurations. It is observed that the presence of cyano groups has a marked impact on the solubility of CO2 and an explanation is offered.

Prediction of the lifetime of nitrile-butadiene rubber by FT-IR.

Science.gov (United States)

Kawashima, Tetsuya; Ogawa, Toshio

2005-12-01

A quantitative measurement method with FT-IR was proposed for a thermal degradation analysis of nitrile-butadiene rubber (NBR). An NBR film was prepared as a model sample on a barium fluoride (BaF2) crystal plate, which was subjected to a heat treatment. The absorbances of various functional groups were measured directly by FT-IR after thermal degradation at high temperatures. By measuring the absorbances, it was possible to readily determine quantitatively each of the functional groups after the degradation of NBR. By assuming that the NBR lifetime was the point at which the absorbance of a carbon-carbon double bond reaches 45% of that prior to thermal treatment, a method for predicting the lifetime of NBR heated below 150 degrees C was proposed, by using an Arrhenius plot of the heating time versus heating temperature.

Anti-trypanosomal activity of non-peptidic nitrile-based cysteine protease inhibitors.

Science.gov (United States)

Burtoloso, Antonio C B; de Albuquerque, Sérgio; Furber, Mark; Gomes, Juliana C; Gonçalez, Cristiana; Kenny, Peter W; Leitão, Andrei; Montanari, Carlos A; Quilles, José Carlos; Ribeiro, Jean F R; Rocha, Josmar R

2017-02-01

The cysteine protease cruzipain is considered to be a validated target for therapeutic intervention in the treatment of Chagas disease. Anti-trypanosomal activity against the CL Brener strain of T. cruzi was observed in the 0.1 μM to 1 μM range for three nitrile-based cysteine protease inhibitors based on two scaffolds known to be associated with cathepsin K inhibition. The two compounds showing the greatest potency against the trypanosome were characterized by EC50 values (0.12 μM and 0.25 μM) that were an order of magnitude lower than the corresponding Ki values measured against cruzain, a recombinant form of cruzipain, in an enzyme inhibition assay. This implies that the anti-trypanosomal activity of these two compounds may not be explained only by the inhibition of the cruzain enzyme, thereby triggering a putative polypharmacological profile towards cysteine proteases.

[Identification of migrants from nitrile-butadiene rubber gloves].

Science.gov (United States)

Mutsuga, Motoh; Kawamura, Yoko; Wakui, Chiseko; Maitani, Tamio

2003-04-01

Polyvinyl chloride gloves containing di(2-ethylhexyl) phthalate are restricted for food contact use. In their place, disposable gloves made from nitrile-butadiene rubber (NBR) are used in contact with foodstuffs. Some unknown substances were found to migrate into n-heptane from NBR gloves. By GC/MS, HR-MS and NMR, their chemical structures were confirmed to be 2,2,4-trimethyl-1,3-pentanediol diisobutyrate (used as a plasticizer), 4,4'-butylidenedi(6-tert-butyl-m-cresol), a mixture of styrenated phenols consisting of 2-(alpha-methylbenzyl)phenol, 4-(alpha-methylbenzyl)phenol, 2,6-di(alpha-methylbenzyl)phenol, 2,4-di(alpha-methylbenzyl)phenol and 2,4,6-tri(alpha-methylbenzyl)phenol (used as antioxidants), and 2,4-di-tert-butylphenol, which seems to a degradation product of antioxidant. Migration levels of these compounds were 1.68 micrograms/cm2 of 2,4-di-tert-butylphenol, 2.80 micrograms/cm2 of 2,2,4-trimethyl-1,3-pentanediol diisobutyrate, 46.08 micrograms/cm2 of styrenated phenols and 4.22 micrograms/cm2 of 4,4'-butylidenedi(6-tert-butyl-m-cresol) into n-heptane, respectively. The content of total styrenated phenols was 6,900 micrograms/g in NBR gloves.

Adhesion of nitrile rubber to UV-assisted surface chemical modified PET fabric, part II: Interfacial characterization of MDI grafted PET

Science.gov (United States)

Razavizadeh, Mahmoud; Jamshidi, Masoud

2016-08-01

Fiber to rubber adhesion is an important subject in rubber industry. It is well known that surface treatment (i.e. physical, mechanical and chemical) is an effective method to improve interfacial bonding of fibers and/or fabrics to rubbers. UV irradiation is an effective method which has been used to increase fabric-rubber interfacial interactions. In this research UV assisted chemical modification of PET fabrics was used to increase PET to nitrile rubber (NBR) adhesion. Nitrile rubber is a perfect selection as fuel and oil resistant rubber. However it has weak bonding to PET fabric. For this purpose PET fabric was carboxylated under UV irradiation and then methylenediphenyl diisocyanate (MDI) was grafted on carboxylated PET. The chemical composition of the fabric before and after surface treatment was investigated by X-ray photoelectron spectroscopy (XPS). The sectional morphology of the experimental PET fibers and the interface between rubber compound and PET fabric was studied using scanning electron microscope (SEM). The morphology and structure of the product were analyzed by an energy dispersive X-ray spectrometer (EDX). FTIR-ATR and H NMR analysis were used to assess surface modifications on the PET irradiated fabrics.

Advanced Booster Composite Case/Polybenzimidazole Nitrile Butadiene Rubber Insulation Development

Science.gov (United States)

Gentz, Steve; Taylor, Robert; Nettles, Mindy

2015-01-01

The NASA Engineering and Safety Center (NESC) was requested to examine processing sensitivities (e.g., cure temperature control/variance, debonds, density variations) of polybenzimidazole nitrile butadiene rubber (PBI-NBR) insulation, case fiber, and resin systems and to evaluate nondestructive evaluation (NDE) and damage tolerance methods/models required to support human-rated composite motor cases. The proposed use of composite motor cases in Blocks IA and II was expected to increase performance capability through optimizing operating pressure and increasing propellant mass fraction. This assessment was to support the evaluation of risk reduction for large booster component development/fabrication, NDE of low mass-to-strength ratio material structures, and solid booster propellant formulation as requested in the Space Launch System NASA Research Announcement for Advanced Booster Engineering Demonstration and/or Risk Reduction. Composite case materials and high-energy propellants represent an enabling capability in the Agency's ability to provide affordable, high-performing advanced booster concepts. The NESC team was requested to provide an assessment of co- and multiple-cure processing of composite case and PBI-NBR insulation materials and evaluation of high-energy propellant formulations.

Aldehydes, ketones, and carboxylic acids formed radiolytically in aqueous solutions of cyanides and simple nitriles

International Nuclear Information System (INIS)

Negron-Mendoza, A.; Draganic, Z.D.; Navarro-Gonzalez, R.; Graganic, I.G.

1983-01-01

A systematic search for aldehydes, ketones, and carboxylic acids was carried out in aqueous solutions of HCN, NH 4 CN, CH 3 CN, and C 2 H 4 CN, that had received multikilogray doses of 60 Co γ radiation. About 30 radiolytic products were identified, among them a large variety of dicarboxylic and tricarboxylic acids. Some of them might be of significant interest in molecular evolution studies of prebiotic processes. They originate in the free-radical-initiated chemical reactions where the additional oligomerization processes are particularly important. Most of the radiolytic products appear in both cyanides and nitriles and point to the importance of reactions involving the carbon-nitrogen triple bond

μ-Hexa-thio-metadiphosphato-bis-[(1,4,7,10,13,16-hexa-oxa-cyclo-octa-decane-κ(6) O)rubidium] aceto-nitrile disolvate.

Science.gov (United States)

Gjikaj, Mimoza; Pook, Niels-Patrick; Qarri, Flora

2013-12-01

The asymmetric unit of the title compound, [Rb2(P2S6)(C12H24O6)2]·2CH3CN, contains one half of an [Rb(18-crown-6)2]2[P2S6] unit and one aceto-nitrile solvent mol-ecule. The [Rb(18-crown-6)]2[P2S6] unit is completed by inversion symmetry. Its Rb(+) ion is situated near the centre of the macrocyclic cavity, but is displaced by 0.8972 (1) Å from the O atoms of the crown in the direction of the [P2S6](2-) moiety. The overall coordination number of the cation is eight, defined by the six crown ether O atoms and by two terminal S atoms of the [P2S6](2-) anion. The hexa-thio-metadiphosphate anion is built up from two tetra-hedral PS4 units joined together by a common edge. The crystal structure is characterized by alternating layers of [Rb(18-crown-6)]2[P2S6] and aceto-nitrile solvent mol-ecules stacked along [010].

A Nitrile Glucoside and Biflavones from the Leaves of Campylospermum excavatum (Ochnaceae).

Science.gov (United States)

Njock, Gaétan Bayiha Ba; Grougnet, Raphaël; Efstathiou, Antonia; Smirlis, Despina; Genta-Jouve, Grégory; Michel, Sylvie; Mbing, Joséphine Ngo; Kritsanida, Marina

2017-11-01

The study of the MeOH extract of the leaves of Campylospermum excavatum led to the isolation of a nitrile glucoside, named campyloside C (1) and an original derivative of ochnaflavone, 7-O-methylochnaflavone (2), along with three known biflavonoids, amentoflavone, sequoiaflavone, and sotetsuflavone (3 - 5). The linkage site of the sub-units of 2 was confirmed by chemical correlation, after semi-synthesis of a trimethoxylated derivative of ochnaflavone (2a). The structures of these compounds as well as their relative and absolute configurations were assigned by 1D- and 2D-NMR experiments, HR-ESI-MS and Electronic Circular Dichroism (ECD) calculations. A low-pass J filter HMBC experiment was performed in order to define the configuration of the double bond of 1. All of the biflavonoids were evaluated against protozoan parasites. Amentoflavone moderately inhibited the promastigote form of Leishmania infantum. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

Optimization of mechanical performance of oxidative nano-particle electrode nitrile butadiene rubber conducting polymer actuator.

Science.gov (United States)

Kim, Baek-Chul; Park, S J; Cho, M S; Lee, Y; Nam, J D; Choi, H R; Koo, J C

2009-12-01

Present work delivers a systematical evaluation of actuation efficiency of a nano-particle electrode conducting polymer actuator fabricated based on Nitrile Butadiene Rubber (NBR). Attempts are made for maximizing mechanical functionality of the nano-particle electrode conducting polymer actuator that can be driven in the air. As the conducting polymer polypyrrole of the actuator is to be fabricated through a chemical oxidation polymerization process that may impose certain limitations on both electrical and mechanical functionality of the actuator, a coordinated study for optimization process of the actuator is necessary for maximizing its performance. In this article actuation behaviors of the nano-particle electrode polypyrrole conducting polymer is studied and an optimization process for the mechanical performance maximization is performed.

Density functional theory and quantum mechanics/molecular mechanics study of cysteine protease inhibition by nitrile-based inhibitors.

Directory of Open Access Journals (Sweden)

Sam P De Visser

2013-12-01

Full Text Available Cysteine protease enzymes are important for human physiology and catalyze key protein degradation pathways. These enzymes react via a nucleophilic reaction mechanism that involves a cysteine residue and the proton of a proximal histidine. Particularly efficient inhibitors of these enzymes are nitrile-based, however, the details of the catalytic reaction mechanism currently are poorly understood. To gain further insight into the inhibition of these molecules, we have performed a combined density functional theory and quantum mechanics/molecular mechanics study on the reaction of a nitrile-based inhibitor with the enzyme active site amino acids. We show here that small perturbations to the inhibitor structure can have dramatic effects on the catalysis and inhibition processes. Thus, we investigated a range of inhibitor templates and show that specific structural changes reduce the inhibitory efficiency by several orders of magnitude. Moreover, as the reaction takes place on a polar surface, we find strong differences between the DFT and QM/MM calculated energetics. In particular, the DFT model led to dramatic distortions from the starting structure and the convergence to a structure that would not fit the enzyme active site. In the subsequent QM/MM study we investigated the use of mechanical versus electronic embedding on the kinetics, thermodynamics and geometries along the reaction mechanism. We find minor effects on the kinetics of the reaction but large geometric and thermodynamics differences as a result of inclusion of electronic embedding corrections. The work here highlights the importance of model choice in the investigation of this biochemical reaction mechanism.

Moessbauer, electron paramagnetic resonance and magnetic susceptibility studies of photosensitive nitrile hydratase from Rhodococcus sp. N-771

International Nuclear Information System (INIS)

Nagamune, Teruyuki; Honda, Jun; Kobayashi, Yoshio; Sasabe, Hiroyuki; Endo, Isao; Ambe, Fumitoshi; Teratani, Yoshitaka; Hirata, Akira

1992-01-01

Moessbauer, magnetic susceptibility and electron paramagnetic resonance (EPR) studies of inactive and photoactivated NHase enzymes were performed to elucidate the electronic change of non-heme two-iron atom center of the enzyme by photoactivation. These spectroscopic investigations revealed that both the two iron atoms of the active NHase could be assigned to low-spin ferric state, and those of the inactive NHase could each be assigned to low-spin ferric and low-spin ferrous ones. From these results, it was concluded that one of the non-heme iron atoms is oxidized in the inactive NHase during photoactivation. (orig.)

Single-molecule conductance with nitrile and amino contacts with Ag or Cu electrodes

International Nuclear Information System (INIS)

Li, Dong-Fang; Mao, Jin-Chuan; Chen, De-Li; Chen, Fang; Ze-Wen, Hong; Zhou, Xiao-Yi; Wang, Ya-Hao; Zhou, Xiao-Shun; Niu, Zhen-Jiang; Maisonhaute, Emmanuel

2015-01-01

The single-molecule conductance of 1,4-dicyanobenzene (DCB), 1,4-benzenediamine (BDA) and 4,4'-biphenyldicarbonitrile (BPDC) with Ag and/or Cu electrodes is measured by electrochemical jump-to-contact STM-break junction. All single-molecule junctions present three sets of conductance values revealing different contact geometries. We observe that the single-molecule conductance of Ag-BDA-Ag junction is larger that of Ag-DCB-Ag junction, and DCB with Ag contacts are more conductive than that with Cu ones. This is related to a different electronic coupling between the molecules and the electrodes. Tunneling decay constants of 1.70 and 1.68 per phenyl group were found for Ag and Cu electrodes, respectively. The present study therefore shows that nitrile and amino groups can also be used as effective anchors for other metals than gold

Formation of Nitriles in the Interstellar Medium via Reactions of Cyano Radicals, CN(X2Σ+), with Unsaturated Hydrocarbons

Science.gov (United States)

Balucani, N.; Asvany, O.; Huang, L. C. L.; Lee, Y. T.; Kaiser, R. I.; Osamura, Y.; Bettinger, H. F.

2000-12-01

Crossed molecular beam experiments of cyano radicals, CN(X2Σ+, ν=0), in their electronic and vibrational ground state reacting with unsaturated hydrocarbons acetylene, C2H2(X1Σ+g), ethylene, C2H4(X1Ag), methylacetylene, CH3CCH(X1A1), allene, H2CCCH2(X1A1), dimethylacetylene, CH3CCCH3(X1A1'), and benzene, C6H6 (X1A1g), were performed at relative collision energies between 13.3 and 36.4 kJ mol-1 to unravel the formation of unsaturated nitriles in the outflows of late-type AGB carbon stars and molecular clouds. In all reactions, the CN radical was found to attack the π electron density of the hydrocarbon molecule with the radical center located at the carbon atom; the formation of an initial addition complex is a prevalent pathway on all the involved potential energy surfaces. A subsequent carbon-hydrogen bond rupture yields the nitriles cyanoacetylene, HCCCN (X1Σ+), vinylcyanide, C2H3CN (X1A'), 1-methylcyanoacetylene, CH3CCCN (X1A1), cyanoallene, H2CCCH(CN) (X1A'), 3-methylcyanoacetylene, HCCCH2CN(X1A'), 1,1-cyanomethylallene, H2CCC(CN)(CH3) (X1A'), and cyanobenzene, C6H5CN (X1A1). In case of acetylene and ethylene, a second reaction channel involves a [1, 2]-H atom shift in the initial HCCHCN and H2CCH2CN collision complexes prior to a hydrogen atom release to form cyanoacetylene, HCCCN (X1Σ+), and vinylcyanide, C2H3CN (X1A'). Since all these radical-neutral reactions show no entrance barriers, have exit barriers well below the energy of the reactant molecules, and are exothermic, the explicit identification of this CN versus H atom exchange pathway under single collision conditions makes this reaction class a compelling candidate to synthesize unsaturated nitriles in interstellar environments holding temperatures as low as 10 K. This general concept makes it even feasible to predict the formation of nitriles once the corresponding unsaturated hydrocarbons are identified in the interstellar medium. Here HCCCN, C2H3CN, and CH3CCCN have been already observed

Reinforcement of nitrile rubber by in situ formed zinc disorbate

Directory of Open Access Journals (Sweden)

2010-09-01

Full Text Available Zinc disorbate (ZDS was in situ formed by the reaction between sorbic acid (SA and zinc oxide (ZnO in nitrile rubber (NBR. The effects of SA amount on the curing characteristics, crosslink density and mechanical properties of peroxide- cured NBR were studied. The results showed that ZDS was generated mainly during the rubber vulcanization, rather than the open mill compounding phase. The results from the crosslink density determinations showed that the formation of ZDS significantly increased the ionic bond content in the vulcanizates. In addition, the formation of ZDS greatly enhanced the mechanical properties of NBR vulcanizates. The modulus, tensile strength, tear strength and hardness were found to be increased with the loading of ZDS. Preheating the compounds before compression moulding was beneficial to the formation of ZDS, and consequently the increases in mechanical properties. At 40 parts per hundred rubber (phr of SA and 16 phr ZnO, five to six folds of tensile strength and tear strength of the neat NBR vulcanizate were achieved. Transmission electron microscopy (TEM results confirmed the nano-dispersion structure of the polymerized ZDS in the NBR matrix.

THE DISSOCIATIVE RECOMBINATION OF PROTONATED ACRYLONITRILE, CH2CHCNH+, WITH IMPLICATIONS FOR THE NITRILE CHEMISTRY IN DARK MOLECULAR CLOUDS AND THE UPPER ATMOSPHERE OF TITAN

International Nuclear Information System (INIS)

Vigren, E.; Hamberg, M.; Zhaunerchyk, V.; Kaminska, M.; Thomas, R. D.; Larsson, M.; Geppert, W. D.; Millar, T. J.; Walsh, C.

2009-01-01

Measurements on the dissociative recombination (DR) of protonated acrylonitrile, CH 2 CHCNH + , have been performed at the heavy ion storage ring CRYRING located in the Manne Siegbahn Laboratory in Stockholm, Sweden. It has been found that at ∼2 meV relative kinetic energy about 50% of the DR events involve only ruptures of X-H bonds (where X = C or N) while the rest leads to the production of a pair of fragments each containing two heavy atoms (alongside H and/or H 2 ). The absolute DR cross section has been investigated for relative kinetic energies ranging from ∼1 meV to 1 eV. The thermal rate coefficient has been determined to follow the expression k(T) = 1.78 x 10 -6 (T/300) - 0.80 cm 3 s -1 for electron temperatures ranging from ∼10 to 1000 K. Gas-phase models of the nitrile chemistry in the dark molecular cloud TMC-1 have been run and results are compared with observations. Also, implications of the present results for the nitrile chemistry of Titan's upper atmosphere are discussed.

Correlation between free-volume parameters and physical properties of polyethylene-nitrile rubber blend

Science.gov (United States)

Gomaa, E.; Mostafa, N.; Mohsen, M.; Mohammed, M.

2004-10-01

Positron annihilation lifetime spectroscopy (PALS) was used to study the immiscibility of a polar nitrile rubber (NBR) that had been blended with pure and waste, low- and high-density polyethylene (PE). The effect of the weight percent of the rubber added to the PE was also investigated. It was found that a complicated variation (positive and negative) in both free-volume parameters (τ3 and I 3) from the values of the initial polymers forms an immiscible blend. These results are supported by a significant broadening in the free-volume hole size distributions. This has been interpreted in terms of interfacial spaces created between the boundaries of the two phases. Furthermore, a correlation was established between the free-volume parameters (τ3 and I 3) and the electrical and mechanical properties of the before mentioned polymer blends as a function of the weight percent of waste PE.

Isothiocyanates, Nitriles, and Epithionitriles from Glucosinolates Are Affected by Genotype and Developmental Stage in Brassica oleracea Varieties.

Science.gov (United States)

Hanschen, Franziska S; Schreiner, Monika

2017-01-01

Vegetables of the Brassica oleracea group, such as broccoli, cauliflower, and cabbage, play an important role for glucosinolate consumption in the human diet. Upon maceration of the vegetable tissue, glucosinolates are degraded enzymatically to form volatile isothiocyanates, nitriles, and epithionitriles. However, only the uptake of isothiocyanates is linked to the cancer-preventive effects. Thus, it is of great interest to evaluate especially the isothiocyanate formation. Here, we studied the formation of glucosinolates and their respective hydrolysis products in sprouts and fully developed vegetable heads of different genotypes of the five B. oleracea varieties: broccoli, cauliflower as well as white, red, and savoy cabbages. Further, the effect of ontogeny (developmental stages) during the head development on the formation of glucosinolates and their respective hydrolysis products was evaluated at three different developmental stages (mini, fully developed, and over-mature head). Broccoli and red cabbage were mainly rich in 4-(methylsulfinyl)butyl glucosinolate (glucoraphanin), whereas cauliflower, savoy cabbage and white cabbage contained mainly 2-propenyl (sinigrin) and 3-(methylsulfinyl)propyl glucosinolate (glucoiberin). Upon hydrolysis, epithionitriles or nitriles were often observed to be the main hydrolysis products, with 1-cyano-2,3-epithiopropane being most abundant with up to 5.7 μmol/g fresh weight in white cabbage sprouts. Notably, sprouts often contained more than 10 times more glucosinolates or their hydrolysis products compared to fully developed vegetables. Moreover, during head development, both glucosinolate concentrations as well as hydrolysis product concentrations changed and mini heads contained the highest isothiocyanate concentrations. Thus, from a cancer-preventive point of view, consumption of mini heads of the B. oleracea varieties is recommended.

Reactions of diiron m-aminocarbyne complexes containing nitrile ligands

Directory of Open Access Journals (Sweden)

Busetto Luigi

2003-01-01

Full Text Available The acetonitrile ligand in the mu-aminocarbyne complexes [Fe2{mu-CN(MeR}(mu-CO(CO(NCMe(Cp2][SO 3CF3] (R = Me, 2a, CH2Ph, 2b, Xyl, 2c (Xyl = 2,6-Me2C6H3 is readily displaced by halides and cyanide anions affording the corresponding neutral species [Fe2{mu-CN(MeR}(mu-CO(CO(X(Cp2 ] (X = Br, I, CN. Complexes 2 undergo deprotonation and rearrangement of the coordinated MeCN upon treatment with organolithium reagents. Trimethylacetonitrile, that does not contain acidic alpha hydrogens has been used in place of MeCN to form the complexes [Fe2{mu-CN(MeR}(mu-CO(CO(NCCMe3 (Cp2][SO3CF3] (7a-c. Attempts to replace the nitrile ligand in 3 with carbon nucleophiles (by reaction with RLi failed, resulting in decomposition products. However the reaction of 7c with LiCºCTol (Tol = C6H4Me, followed by treatment with HSO3CF3, yielded the imino complex [Fe2{mu-CN(MeXyl}(mu-CO(CO {N(HC(CºCC6H4Me-4CMe3}(Cp 2][SO3CF3 ] (8, obtained via acetilyde addition at the coordinated NCCMe3.

Synthetic Studies on Bioactive Natural Polyketides: Intramolecular Nitrile Oxide-Olefin Cycloaddition Approach for Construction of a Macrolactone Skeleton of Macrosphelide B

Directory of Open Access Journals (Sweden)

Seung-Mann Paek

2011-06-01

Full Text Available Studies on the synthesis of macrosphelide B via an intramolecular nitrile oxide-olefin cycloaddition (INOC is described. In particular, an asymmetric INOC approach using phase transfer catalysts seems to be a potentially efficient and versatile procedure for the construction of the macrolactone skeleton of macrosphelide B in terms of facial selectivity. Our preliminary and unprecedented stereoselective procedure is anticipated to be usefully applied through further studies for the synthesis of the macrosphelide family.

Nitrile/Buna N Material Failure Assessment for an O-Ring used on the Gaseous Hydrogen Flow Control Valve (FCV) of the Space Shuttle Main Engine

Science.gov (United States)

Wingard, Doug

2006-01-01

After the rollout of Space Shuttle Discovery in April 2005 in preparation for return-to-flight, there was a failure of the Orbiter (OV-103) helium signature leak test in the gaseous hydrogen (GH2) system. Leakage was attributed to the Flow Control Valve (FCV) in Main Engine 3. The FCV determined to be the source of the leak for OV-103 is designated as LV-58. The nitrile/Buna N rubber O-ring seal was removed from LV-58, and failure analysis indicated radial cracks providing leak paths in one quadrant. Cracks were eventually found in 6 of 9 FCV O-rings among the three Shuttle Orbiters, though none were as severe as those for LV-58, OV-103. Testing by EM10 at MSFC on all 9 FCV O- rings included: laser dimensional, Shore A hardness and properties from a dynamic mechanical analyzer (DMA) and an Instron tensile machine. The following test data was obtained on the cracked quadrant of the LV-58, OV-103 O-ring: (1) the estimated compression set was only 9.5%, compared to none for the rest of the O-ring; (2) Shore A hardness for the O.D. was higher by almost 4 durometer points than for the rest of the O-ring; and (3) DMA data showed that the storage/elastic modulus E was almost 25% lower than for the rest of the O-ring. Of the 8 FCV O-rings tested on an Instron, 4 yielded tensile strengths that were below the MIL spec requirement of 1350 psi-a likely influence of rubber cracking. Comparisons were made between values of modulus determined by DNA (elastic) and Instron (Young s). Each nitrile/Buna N O-ring used in the FCV conforms to the MIL-P-25732C specification. A number of such O-rings taken from shelf storage at MSFC and Kennedy Space Center (KSC) were used to generate a reference curve of DMA glass transition temperature (Tg) vs. shelf storage time ranging from 8 to 26 years. A similar reference curve of TGA onset temperature (of rubber weight loss) vs. shelf storage time was also generated. The DMA and TGA data for the used FCV O-rings were compared to the reference

Nifurtimox Activation by Trypanosomal Type I Nitroreductases Generates Cytotoxic Nitrile Metabolites*

Science.gov (United States)

Hall, Belinda S.; Bot, Christopher; Wilkinson, Shane R.

2011-01-01

The prodrug nifurtimox has been used for more than 40 years to treat Chagas disease and forms part of a recently approved combinational therapy that targets West African trypanosomiasis. Despite this, its mode of action is poorly understood. Detection of reactive oxygen and nitrogen intermediates in nifurtimox-treated extracts led to the proposal that this drug induces oxidative stress in the target cell. Here, we outline an alternative mechanism involving reductive activation by a eukaryotic type I nitroreductase. Several enzymes proposed to metabolize nifurtimox, including prostaglandin F2α synthase and cytochrome P450 reductase, were overexpressed in bloodstream-form Trypanosoma brucei. Only cells with elevated levels of the nitroreductase displayed altered susceptibility to this nitrofuran, implying a key role in drug action. Reduction of nifurtimox by this enzyme was shown to be insensitive to oxygen and yields a product characterized by LC/MS as an unsaturated open-chain nitrile. This metabolite was shown to inhibit both parasite and mammalian cell growth at equivalent concentrations, in marked contrast to the parental prodrug. These experiments indicate that the basis for the selectivity of nifurtimox against T. brucei lies in the expression of a parasite-encoded type I nitroreductase. PMID:21345801

Effect of Graphene Oxide on Anti-aging Property of Nitrile Butadiene Rubber

Directory of Open Access Journals (Sweden)

ZHANG Lin

2017-03-01

Full Text Available The blends with higher damping performance was prepared based on nitrile butadiene rubber(NBR with addition of graphene oxide(GO and modified graphene oxide(MGO prepared by improved Hammer method. Meanwhile, the damping property and the anti-aging property of the blends were investigated by DMA, AFM, SEM and so forth. The results show that after the addition of the GO and MGO, the tangent of loss angle(tanδ increases and also the anti-aging property is improved. When adding less amount of GO in the matrix, the anti-aging property is better; when adding MGO in the matrix, the amount of addition is not obviously related with the anti-aging property of the blends. The dispersion of GO and MGO has positive correlation with its anti-aging property. By microscopic analysis, the main reason for the decrease of anti-aging property of the blends is the agglomeration of the GO. The interface effect formed by the addition of MGO and GO is the main reason for its high damping property and anti-aging property.

Highly Selective Separation of Carbon Dioxide from Nitrogen and Methane by Nitrile/Glycol-Difunctionalized Ionic Liquids in Supported Ionic Liquid Membranes (SILMs)

OpenAIRE

Hojniak, Sandra D.; Silverwood, Ian P.; Laeeq Khan, Asim; Vankelecom, Ivo F.J.; Dehaen, Wim; Kazarian, Sergei G.; Binnemans, Koen

2014-01-01

Novel difunctionalized ionic liquids (ILs) containing a triethylene glycol monomethyl ether chain and a nitrile group on a pyrrolidinium or imidazolium cation have been synthesized and incorporated into supported ionic liquid membranes (SILMs). These ILs exhibit ca. 2.3 times higher CO2/N2 and CO2/CH4 gas separation selectivities than analogous ILs functionalized only with a glycol chain. Although the glycol moiety ensures room temperature liquidity of the pyrrolidinium and imidazolium ILs, t...

Molecular Simulation of Gas Solubility in Nitrile Butadiene Rubber.

Science.gov (United States)

Khawaja, M; Sutton, A P; Mostofi, A A

2017-01-12

Molecular simulation is used to compute the solubility of small gases in nitrile butadiene rubber (NBR) with a Widom particle-insertion technique biased by local free volume. The convergence of the method is examined as a function of the number of snapshots upon which the insertions are performed and the number of insertions per snapshot and is compared to the convergence of the unbiased Widom insertion technique. The effect of varying the definition of local free volume is also investigated. The acrylonitrile content of the polymer is altered to examine its influence on the solubility of helium, CO 2 , and H 2 O, and the solubilities of polar gases are found to be enhanced relative to those of nonpolar gases, in qualitative agreement with experiment. To probe this phenomenon further, the solubilities are decomposed into contributions from the neighborhoods of different atoms, using a Voronoi cell construction, and a strong bias is found for CO 2 and H 2 O in particular to be situated near nitrogen sites in the elastomer. Temperature is shown to suppress the solubility of CO 2 and H 2 O but to increase that of helium. Increasing pressure is found to suppress the solubility of all gases but at different rates, according to a balance between their molecular sizes and electrostatic interactions with the polymer. These results are relevant to the use of NBR seals at elevated temperatures and pressures, such as in oil and gas wells.

Suppressor screen and phenotype analyses revealed an emerging role of the Monofunctional peroxisomal enoyl-CoA hydratase 2 in compensated cell enlargement

Directory of Open Access Journals (Sweden)

Mana eKatano

2016-02-01

Full Text Available Efficient use of seed nutrient reserves is crucial for germination and establishment of plant seedlings. Mobilizing seed oil reserves in Arabidopsis involves β-oxidation, the glyoxylate cycle, and gluconeogenesis, which provide essential energy and the carbon skeletons needed to sustain seedling growth until photoautotrophy is acquired. We demonstrated that H+-PPase activity is required for gluconeogenesis. Lack of H+-PPase in fugu5 mutants increases cytosolic pyrophosphate (PPi levels, which partially reduces sucrose synthesis de novo and inhibits cell division. In contrast, post-mitotic cell expansion in cotyledons was unusually enhanced, a phenotype called compensation. Therefore, it appears that PPi inhibits several cellular functions, including cell cycling, to trigger compensated cell enlargement (CCE. Here, we mutagenized fugu5-1 seeds with 12C6+ heavy-ion irradiation and screened mutations that restrain CCE to gain insight into the genetic pathway(s involved in CCE. We isolated A#3-1, in which cell size was severely reduced, but cell number remained similar to that of original fugu5-1. Moreover, cell number decreased in A#3-1 single mutant (A#3-1sm, similar to that of fugu5-1, but cell size was almost equal to that of the wild type. Surprisingly, A#3-1 mutation did not affect CCE in other compensation exhibiting mutant backgrounds, such as an3-4 and fugu2-1/fas1-6. Subsequent map-based cloning combined with genome sequencing and HRM curve analysis identified enoyl-CoA hydratase 2 (ECH2 as the causal gene of A#3-1. The above phenotypes were consistently observed in the ech2-1 allele and supplying sucrose restored the morphological and cellular phenotypes in fugu5-1, ech2-1, A#3-1sm, fugu5-1 ech2-1 and A#3-1;fugu5-1. Taken together, these results suggest that defects in either H+-PPase or ECH2 compromise cell proliferation due to defects in mobilizing stored lipids. In contrast, ECH2 alone likely promotes CCE during the post-mitotic cell

Reactions of uranium (III) and (IV) compounds with ketones, nitriles and acid chlorides. Towards a use of uranium complexes in organic synthesis

International Nuclear Information System (INIS)

Adam, Raymond

1993-01-01

In this research thesis, the author shows that various organic molecules can be interestingly transformed into uranium complexes with degrees of oxidation of +3 or +4. In a first part, the author describes reactions of carbonyl compounds with the UCl 4 -Na(Hg) reducing system. Then, he addresses reductions of ketones, nitriles and acid chlorides by a uranium (III) complex: Cp 3 U(THF). The third part reports a detailed study of the reduction of ketones by U(BH 4 ) 4 [fr

Adhesion of nitrile rubber to UV-assisted surface chemical modified PET fabric, part II: Interfacial characterization of MDI grafted PET

Energy Technology Data Exchange (ETDEWEB)

Razavizadeh, Mahmoud; Jamshidi, Masoud, E-mail: mjamshidi@iust.ac.ir

2016-08-30

Highlights: • In this research UV-irradiated PET fabric was chemically modified. • The fabric at first carboxylated under UV irradiation using glutaric anhydride, then it was grafted using isocyanate (i.e. MDI). • The surface of the fabric was characterized before and after each treating satge. • The composite samples were prepared and tested for T-Peel test. The surfaces of the fabrics were surface characterized to understand. - Abstract: Fiber to rubber adhesion is an important subject in rubber industry. It is well known that surface treatment (i.e. physical, mechanical and chemical) is an effective method to improve interfacial bonding of fibers and/or fabrics to rubbers. UV irradiation is an effective method which has been used to increase fabric-rubber interfacial interactions. In this research UV assisted chemical modification of PET fabrics was used to increase PET to nitrile rubber (NBR) adhesion. Nitrile rubber is a perfect selection as fuel and oil resistant rubber. However it has weak bonding to PET fabric. For this purpose PET fabric was carboxylated under UV irradiation and then methylenediphenyl diisocyanate (MDI) was grafted on carboxylated PET. The chemical composition of the fabric before and after surface treatment was investigated by X-ray photoelectron spectroscopy (XPS). The sectional morphology of the experimental PET fibers and the interface between rubber compound and PET fabric was studied using scanning electron microscope (SEM). The morphology and structure of the product were analyzed by an energy dispersive X-ray spectrometer (EDX). FTIR-ATR and H NMR analysis were used to assess surface modifications on the PET irradiated fabrics.

Adhesion of nitrile rubber to UV-assisted surface chemical modified PET fabric, part II: Interfacial characterization of MDI grafted PET

International Nuclear Information System (INIS)

Razavizadeh, Mahmoud; Jamshidi, Masoud

2016-01-01

Highlights: • In this research UV-irradiated PET fabric was chemically modified. • The fabric at first carboxylated under UV irradiation using glutaric anhydride, then it was grafted using isocyanate (i.e. MDI). • The surface of the fabric was characterized before and after each treating satge. • The composite samples were prepared and tested for T-Peel test. The surfaces of the fabrics were surface characterized to understand. - Abstract: Fiber to rubber adhesion is an important subject in rubber industry. It is well known that surface treatment (i.e. physical, mechanical and chemical) is an effective method to improve interfacial bonding of fibers and/or fabrics to rubbers. UV irradiation is an effective method which has been used to increase fabric-rubber interfacial interactions. In this research UV assisted chemical modification of PET fabrics was used to increase PET to nitrile rubber (NBR) adhesion. Nitrile rubber is a perfect selection as fuel and oil resistant rubber. However it has weak bonding to PET fabric. For this purpose PET fabric was carboxylated under UV irradiation and then methylenediphenyl diisocyanate (MDI) was grafted on carboxylated PET. The chemical composition of the fabric before and after surface treatment was investigated by X-ray photoelectron spectroscopy (XPS). The sectional morphology of the experimental PET fibers and the interface between rubber compound and PET fabric was studied using scanning electron microscope (SEM). The morphology and structure of the product were analyzed by an energy dispersive X-ray spectrometer (EDX). FTIR-ATR and H NMR analysis were used to assess surface modifications on the PET irradiated fabrics.

Two-Dimensional Infrared Study of Vibrational Coupling between Azide and Nitrile Reporters in a RNA Nucleoside.

Science.gov (United States)

Schmitz, Andrew J; Hogle, David G; Gai, Xin Sonia; Fenlon, Edward E; Brewer, Scott H; Tucker, Matthew J

2016-09-08

The vibrations in the azide, N3, asymmetric stretching region and nitrile, CN, symmetric stretching region of 2'-azido-5-cyano-2'-deoxyuridine (N3CNdU) are examined by two-dimensional infrared (2D IR) spectroscopy. At earlier waiting times, the 2D IR spectrum shows the presence of both vibrational transitions along the diagonal and off-diagonal cross peaks indicating vibrational coupling. The coupling strength is determined from the off-diagonal anharmonicity to be 66 cm(-1) for the intramolecular distance of ∼7.9 Å, based on a structural map generated for this model system. In addition, the frequency-frequency correlation decay is detected, monitoring the solvent dynamics around each individual probe position. Overall, these vibrational reporters can be utilized in tandem to simultaneously track global structural information and fast structural fluctuations.

Investigation on thermal oxidative aging of nitrile rubber (NBR) O-rings under compression stress

Science.gov (United States)

Liu, X. R.; Zhang, W. F.; Lou, W. T.; Huang, Y. X.; Dai, W.

2017-11-01

The degradation behaviors of nitrile rubber O-rings exposure to air under compression were investigated at three elevated temperatures. The physical and mechanical properties of the aging samples before and after exposure at selected time were studied by measuring weight loss, tensile strength and elongation at break. The Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy and fracture morphology were used to reveal the microstructural changes of the aging samples. The results indicate that the weight decreased with exposure time and temperature. Based on the results of the crosslinking density, the crosslinking predominates during the most of aging process. The significant changes in tensile strength and elongation at break also indicate the severe degradation in air. The fracture morphology results show that the fracture surface after 64 days of exposure to air turns rough and present defects. The ATR-FTIR results demonstrate that the hydroxyl groups were formed for the samples aged in air.

Improving Thermo-Oxidative Stability of Nitrile Rubber Composites by Functional Graphene Oxide.

Science.gov (United States)

Zhong, Rui; Zhang, Zhao; Zhao, Hongguo; He, Xianru; Wang, Xin; Zhang, Rui

2018-05-30

Graphene oxide (GO), modified with anti-aging agent p -phenylenediamine (PPD), was added into nitrile rubber (NBR) in order to improve the thermo-oxidative stability of NBR. The modification of GO and the transformation of functional groups were characterized by Fourier transform infrared spectroscopy (FTIR), Raman, and X-ray diffraction (XRD). Mechanical performances of NBR composites before and after the thermo-oxidative aging were recorded. The results of dynamic mechanical analysis (DMA) show an increased storage modulus (G') and a decreased value of area of tan δ peak after introducing modified GO into NBR. It indicates that filler particles show positive interaction with molecular chains. The thermo-oxidative stability of composites was investigated by thermogravimetric analysis (TG) and differential scanning calorimetry (DSC). Then, the thermo-oxidative aging kinetic parameters were obtained by the Flynn⁻Wall⁻Ozawa (FWO) equation. The results of aging tests show that the thermo-oxidative stability of rubber matrix increases obviously after introducing GO⁻PPD. In addition, mechanical properties (tensile strength and elongation at break) of both before and after aged NBR/GO⁻PPD composites were superior to that of NBR. This work provides meaningful guidance for achieving multifunction thermo-oxidative aging resistance rubber composites.

Sensitivity of core-level spectroscopy to electrostatic environments of nitrile groups: An ab initio study

Directory of Open Access Journals (Sweden)

Abid Hussain

2017-09-01

Full Text Available Ab initio quantum chemistry calculations have been performed to probe the influence of hydrogen bonding on the electronic structure of hydrogen cyanide (HCN. Our calculations determine the origin of nitrogen-specific Raman spectral features from resonant inelastic X-ray scattering occurring in the presence of a water molecule and an electric dipole field. The similarity of the two interactions in altering the electronic structure of the nitrogen atom differs only in the covalent contributions from the water molecule. The CN stretching mode as a structural probe was also investigated to study the electronic origin of the anomalous frequency shift of the nitrile group when subjected to hydrogen bonding and an electrostatic dipole field. The major changes in the electronic structure of HCN are electrostatic in nature and originate from dipole-dipole interactions. The relative shifts of the CN stretching frequency are in good agreement with those experimentally observed.

Investigation of friction in rectangular Nitrile-Butadiene Rubber (NBR) hydraulic rod seals for defence applications

Energy Technology Data Exchange (ETDEWEB)

Bhaumik, Shankar; Guruprasad, S.; Bhandari, P. [R and DE , Dighi (India); Kumaraswamy, A. [Defence Institute of Advanced Technology, Girinagar (India)

2015-11-15

Contact based FE simulations have been carried out to estimate the contact pressure distribution at seal/rod interface at sealed oil pressures of 10, 20 and 30 MPa and constant rod velocity of 0.12 m/s. Oil film thickness at the interface was then computed analytically at various combinations of oil pressures and rod velocities. Seal contact pressure and oil film thickness data along with surface roughness, intermolecular interaction between seal/rod interfaces has been perused to estimate the friction in Nitrile-Butadiene Rubber (NBR) rectangular hydraulic rod seals using theoretical models such as Inverse hydrodynamic lubrication (IHL), Greenwood-Williamson (GW) and Wassink's models. The friction at seal/rod interface was also measured experimentally using a specially designed test rig. The comparison of theoretical and experimental data revealed that, friction computed from GW and Wassink's models had good agreement with the experimental results.

Preparation and Sound Absorption Properties of a Barium Titanate/Nitrile Butadiene Rubber–Polyurethane Foam Composite with Multilayered Structure

Science.gov (United States)

Jiang, Xueliang; Yang, Zhen; Wang, Zhijie; Zhang, Fuqing; You, Feng

2018-01-01

Barium titanate/nitrile butadiene rubber (BT/NBR) and polyurethane (PU) foam were combined to prepare a sound-absorbing material with an alternating multilayered structure. The effects of the cell size of PU foam and the alternating unit number on the sound absorption property of the material were investigated. The results show that the sound absorption efficiency at a low frequency increased when decreasing the cell size of PU foam layer. With the increasing of the alternating unit number, the material shows the sound absorption effect in a wider bandwidth of frequency. The BT/NBR-PU foam composites with alternating multilayered structure have an excellent sound absorption property at low frequency due to the organic combination of airflow resistivity, resonance absorption, and interface dissipation. PMID:29565321

Preparation and Sound Absorption Properties of a Barium Titanate/Nitrile Butadiene Rubber–Polyurethane Foam Composite with Multilayered Structure

Directory of Open Access Journals (Sweden)

Xueliang Jiang

2018-03-01

Full Text Available Barium titanate/nitrile butadiene rubber (BT/NBR and polyurethane (PU foam were combined to prepare a sound-absorbing material with an alternating multilayered structure. The effects of the cell size of PU foam and the alternating unit number on the sound absorption property of the material were investigated. The results show that the sound absorption efficiency at a low frequency increased when decreasing the cell size of PU foam layer. With the increasing of the alternating unit number, the material shows the sound absorption effect in a wider bandwidth of frequency. The BT/NBR-PU foam composites with alternating multilayered structure have an excellent sound absorption property at low frequency due to the organic combination of airflow resistivity, resonance absorption, and interface dissipation.

Preparation and Sound Absorption Properties of a Barium Titanate/Nitrile Butadiene Rubber-Polyurethane Foam Composite with Multilayered Structure.

Science.gov (United States)

Jiang, Xueliang; Yang, Zhen; Wang, Zhijie; Zhang, Fuqing; You, Feng; Yao, Chu

2018-03-22

Barium titanate/nitrile butadiene rubber (BT/NBR) and polyurethane (PU) foam were combined to prepare a sound-absorbing material with an alternating multilayered structure. The effects of the cell size of PU foam and the alternating unit number on the sound absorption property of the material were investigated. The results show that the sound absorption efficiency at a low frequency increased when decreasing the cell size of PU foam layer. With the increasing of the alternating unit number, the material shows the sound absorption effect in a wider bandwidth of frequency. The BT/NBR-PU foam composites with alternating multilayered structure have an excellent sound absorption property at low frequency due to the organic combination of airflow resistivity, resonance absorption, and interface dissipation.

CuNi Nanoparticles Assembled on Graphene for Catalytic Methanolysis of Ammonia Borane and Hydrogenation of Nitro/Nitrile Compounds

International Nuclear Information System (INIS)

Yu, Chao

2017-01-01

Here we report a solution phase synthesis of 16 nm CuNi nanoparticles (NPs) with the Cu/Ni composition control. These NPs are assembled on graphene (G) and show Cu/Ni composition-dependent catalysis for methanolysis of ammonia borane (AB) and hydrogenation of aromatic nitro (nitrile) compounds to primary amines in methanol at room temperature. Among five different CuNi NPs studied, the G-Cu 36 Ni 64 NPs are the best catalyst for both AB methanolysis (TOF = 49.1 mol H2 mol CuNi -1 min -1 and E a = 24.4 kJ/mol) and hydrogenation reactions (conversion yield >97%). In conclusion, the G-CuNi represents a unique noble-metal-free catalyst for hydrogenation reactions in a green environment without using pure hydrogen.

Nitrilase enzymes and their role in plant–microbe interactions

OpenAIRE

Howden, Andrew J. M.; Preston, Gail M.

2009-01-01

Summary Nitrilase enzymes (nitrilases) catalyse the hydrolysis of nitrile compounds to the corresponding carboxylic acid and ammonia, and have a wide range of industrial and biotechnological applications, including the synthesis of industrially important carboxylic acids and bioremediation of cyanide and toxic nitriles. Nitrilases are produced by a wide range of organisms, including plants, bacteria and fungi, but despite their biotechnological importance, the role of these enzymes in living ...

Metabolic reconstructions identify plant 3-methylglutaconyl-CoA hydratase that is crucial for branched-chain amino acid catabolism in mitochondria

Science.gov (United States)

The proteinogenic branched-chain amino acids (BCAAs) leucine, isoleucine, and valine are essential nutrients for mammals. In plants, they double as alternative energy sources when carbohydrates become limiting, the catabolism of BCAAs providing electrons to the respiratory chain and intermediates...

Improving Thermo-Oxidative Stability of Nitrile Rubber Composites by Functional Graphene Oxide

Directory of Open Access Journals (Sweden)

Rui Zhong

2018-05-01

Full Text Available Graphene oxide (GO, modified with anti-aging agent p-phenylenediamine (PPD, was added into nitrile rubber (NBR in order to improve the thermo-oxidative stability of NBR. The modification of GO and the transformation of functional groups were characterized by Fourier transform infrared spectroscopy (FTIR, Raman, and X-ray diffraction (XRD. Mechanical performances of NBR composites before and after the thermo-oxidative aging were recorded. The results of dynamic mechanical analysis (DMA show an increased storage modulus (G’ and a decreased value of area of tan δ peak after introducing modified GO into NBR. It indicates that filler particles show positive interaction with molecular chains. The thermo-oxidative stability of composites was investigated by thermogravimetric analysis (TG and differential scanning calorimetry (DSC. Then, the thermo-oxidative aging kinetic parameters were obtained by the Flynn–Wall–Ozawa (FWO equation. The results of aging tests show that the thermo-oxidative stability of rubber matrix increases obviously after introducing GO–PPD. In addition, mechanical properties (tensile strength and elongation at break of both before and after aged NBR/GO–PPD composites were superior to that of NBR. This work provides meaningful guidance for achieving multifunction thermo-oxidative aging resistance rubber composites.

Natural rubber/nitrile butadiene rubber/hindered phenol composites with high-damping properties

Directory of Open Access Journals (Sweden)

Xiuying Zhao

2015-10-01

Full Text Available New natural rubber (NR/nitrile butadiene rubber (NBR/hindered phenol (AO-80 composites with high-damping properties were prepared in this study. The morphological, structural, and mechanical properties were characterized by atomic force microscopy (AFM, polarized Fourier transform infrared spectrometer (FTIR, dynamic mechanical thermal analyzer (DMTA, and a tensile tester. Each composite consisted of two phases: the NR phase and the NBR/AO-80 phase. There was partial compatibility between the NR phase and the NBR/AO-80 phase, and the NR/NBR/AO-80 (50/50/20 composite exhibited a co-continuous morphology. Strain-induced crystallization occurred in the NR phase at strains higher than 200%, and strain-induced orientation appeared in the NBR/AO-80 phase with the increase of strain from 100% to 500%. The composites had a special stress–strain behavior and mechanical properties because of the simultaneous strain-induced orientation and strain-induced crystallization. In the working temperature range of a seismic isolation bearing, the composites (especially the NR/NBR/AO-80 (50/50/20 composite presented a high loss factor, high area of loss peak (TA, and high hysteresis energy. Therefore, the NR/NBR/AO-80 rubber composites are expected to have important application as a high-performance damping material for rubber bearing.

One-pot synthesis of 4′-alkyl-4-cyanobiaryls on the basis of the terephthalonitrile dianion and neutral aromatic nitrile cross-coupling

Directory of Open Access Journals (Sweden)

Roman Yu. Peshkov

2016-07-01

Full Text Available A convenient one-pot approach to alkylcyanobiaryls is described. The method is based on biaryl cross-coupling between the sodium salt of the terephthalonitrile dianion and a neutral aromatic nitrile in liquid ammonia, and successive alkylation of the long-lived anionic intermediate with alkyl bromides. The reaction is compatible with benzonitriles that contain methyl, methoxy and phenyl groups, fluorine atoms, and a 1-cyanonaphthalene residue. The variety of ω-substituted alkyl bromides, including an extra bromine atom, a double bond, cyano and ester groups, as well as a 1,3-dioxane fragment are suitable as alkylation reagents.

Adhesion of nitrile rubber (NBR) to polyethylene terephthalate (PET) fabric. Part 1: PET surface modification by methylenediphenyl di-isocyanate (MDI)

International Nuclear Information System (INIS)

Razavizadeh, Mahmoud; Jamshidi, Masoud

2016-01-01

Graphical abstract: - Highlights: • Glutaric anhydride peroxide (GAP) was grafted on PET surface by UV irradiation method. Then MDI was attached to GAP on PET surface. • The fabric was vulcanized by nitrile rubber. • Peet test was performed after each stage of surface modification. • Curing temperature was increased and the tests were repeated. • Effect of MDI coating on PET without carboxylation was evaluated. Effect of vulcanizing temperature on this product was also studied. - Abstract: Fiber to rubber adhesion is an important subject in rubber composite industry. It is well known that surface physical, mechanical and chemical treatments are effective methods to improve interfacial bonding. Ultra violet (UV) light irradiation is an efficient method which is used to increase interfacial interactions. In this research UV assisted chemical modification of PET fabric was used to increase its bonding to nitrile rubber (NBR). NBR is perfect selection to produce fuel and oil resistant rubber parts but it has weak bonding to fabrics. For this purpose at first, the PET fabric was carboxylated under UV irradiation and then methylenediphenyl diisocyanate (MDI) was reacted and grafted to carboxylated PET. T-peel test was used to evaluate PET fabric to NBR bonding strength. Attenuated total reflectance-Fourier transform infrared spectroscopy (FTIR-AT) was used to assess surface modifications of the PET fabrics. The chemical composition of the PET surfaces before and after carboxylation and MDI grafting was investigated by X-ray photoelectron spectroscopy (XPS). It was found that at vulcanizing temperature of 150 °C, carboxylation in contrary to MDI grafting, improved considerably PET to NBR adhesion. Finally effect of curing temperature on PET to NBR bonding strength was determined. It was found that increasing vulcanizing temperature to 170 °C caused considerable improvement (about 134%) in bonding strength.

Formation of nitrile species on Ag nanostructures supported on a-Al2O3: a new corrosion route for silver exposed to the atmosphere

Science.gov (United States)

Peláez, R. J.; Espinós, J. P.; Afonso, C. N.

2017-04-01

The aging of supported Ag nanostructures upon storage in ambient conditions (air and room temperature) for 20 months has been studied. The samples are produced on glass substrates by pulsed laser deposition (PLD); first a 15 nm thick buffer layer of amorphous aluminum oxide (a-Al2O3) is deposited, followed by PLD of Ag. The amount of deposited Ag ranges from that leading to a discontinuous layer up to an almost-percolated layer with a thickness of oxidized faster, the smaller the amount of Ag. The corrosion leads to the formation of nitrile species due to the reaction between NO x species from the atmosphere adsorbed at the surface of Ag, and hydrocarbons adsorbed in defects at the surface of the a-Al2O3 layer during the deposition of the Ag nanostructures by PLD that migrate to the surface of the metal with time. The nitrile formation thus results in the main oxidation mechanism and inhibits almost completely the formation of sulphate/sulphide. Finally, the optical changes upon aging offer an easy-to-use tool for following the aging process. They are dominated by an enhanced absorption in the UV side of the spectrum and a blue-shift of the surface plasmon resonance that are, respectively, related to the formation of a dielectric overlayer on the Ag nanostructure and changes in the dimensions/features of the nanostructures, both due to the oxidation process.

Desenvolvimento de látices nitrílicos carboxilados Development of carboxylated nitrile latices

Directory of Open Access Journals (Sweden)

Ana Luzia O. Macedo

2008-03-01

Full Text Available É apresentando um estudo sobre o desenvolvimento de um processo de polimerização em emulsão de acrilonitrila, butadieno e ácido carboxílico, em escala piloto. O objetivo desse estudo é a produção de látex nitrílico carboxilado com alto teor de sólidos diretamente no processo de polimerização, sem a necessidade de etapas pós-reação de concentração. Foi estudado o efeito da temperatura, do tipo e quantidade de emulsificante, do tipo e quantidade de iniciador, do tipo de agitador e da velocidade de agitação e das etapas de adição incremental. Para isso, foram realizadas 32 reações, das quais somente 7 chegaram ao alvo de teor de sólidos desejado (50%. Os látices obtidos foram caracterizados quanto ao seu teor de sólidos, tamanho e distribuição de tamanhos das partículas, e por espectroscopia na região do infravermelho para determinação da composição monomérica. Foram obtidos látices com até 57% de sólidos totais. O tamanho médio de partícula variou de 130 a 230 nm.An emulsion polymerization process of acrylonitrile, butadiene and carboxylic acid was studied, in a pilot plant, for producing carboxylated nitrile latices with high solids content directly from the polymerization process, without the need of post-reaction steps of concentration. The effect of temperature, type and amount of emulsifier, type and amount of initiator, type of stirring system, stirring speed and incremental additions for producing high solid latices was studied. To attain this goal, 32 polymerization reactions were carried out, but only 7 attained the target for total solids (50%. The solids content, the average particle size and its distribution and the monomer composition were determined. A latex containing up to 57% of total solids was obtained. The average particle size ranged from 130 to 230 nm.

Influence Of Gamma Irradiation On Mechanical And Thermal Properties Of Waste Polyethylene / Nitrile Butadiene Rubber Blend

International Nuclear Information System (INIS)

Aly, R.O.

2012-01-01

Gamma irradiation radical-radical interaction crosslinking of elastomers and thermoplastic is a special type of crosslinking technique that has gained importance over conventional chemical crosslinking method as process is fast, pollution free and simple. In this study, a blend polymer, based on waste polyethylene and nitrile butadiene rubber, has been irradiated with gamma rays then mechanically and thermally investigated at varying NBR content. FTIR and SEM techniques were used in addition to the swelling behaviour by toluene solvent to emphasize the blend formation. The mechanical properties like tensile strength, elongation at break and modulus at different elongations were studied and compared with those of non-irradiated ones. A relatively low radiation dose was found effective in improving the level of mechanical properties. Differential scanning calorimeter and thermogravimetric analysis were used to study the thermal characteristics of the irradiated polymer. Enhancement in thermal stability has been observed for higher NBR containing blends and via radiation-induced crosslinking up to ≅ 50 kGy

Influence of gamma irradiation on mechanical and thermal properties of waste polyethylene/nitrile butadiene rubber blend

Directory of Open Access Journals (Sweden)

Raouf O. Aly

2016-11-01

Full Text Available Gamma irradiation radical–radical interaction crosslinking of elastomers and thermoplastic is a special type of crosslinking technique that has gained importance over conventional chemical crosslinking method as process is fast, pollution free, and simple. In this work a blend polymer, based on waste polyethylene and nitrile butadiene rubber, has been irradiated with gamma-rays, mechanically and thermally investigated at varying NBR content. FTIR and SEM techniques were used in addition to the swelling behavior to emphasize the blend formation. Mechanical properties like tensile strength, elongation at break and modulus at different elongations were studied and compared with those of unirradiated ones. A relatively low-radiation dose was found effective in improving the level of mechanical properties. Differential scanning calorimeter and thermogravimetric analysis were used to study the thermal characteristics of the irradiated polymer. Enhancement in thermal stability has been observed for higher NBR containing blends and via radiation-induced crosslinking up to ≈50 kGy.

Impact of thermal processing on sulforaphane yield from broccoli ( Brassica oleracea L. ssp. italica).

Science.gov (United States)

Wang, Grace C; Farnham, Mark; Jeffery, Elizabeth H

2012-07-11

In broccoli, sulforaphane forms when the glucosinolate glucoraphanin is hydrolyzed by the endogenous plant thiohydrolase myrosinase. A myrosinase cofactor directs hydrolysis away from the formation of bioactive sulforaphane and toward an inactive product, sulforaphane nitrile. The cofactor is more heat sensitive than myrosinase, presenting an opportunity to preferentially direct hydrolysis toward sulforaphane formation through regulation of thermal processing. Four broccoli cultivars were microwave heated, boiled, or steamed for various lengths of time. Production of nitrile during hydrolysis of unheated broccoli varied among cultivars from 91 to 52% of hydrolysis products (Pinnacle > Marathon > Patriot > Brigadier). Boiling and microwave heating caused an initial loss of nitrile, with a concomitant increase in sulforaphane, followed by loss of sulforaphane, all within 1 min. In contrast, steaming enhanced sulforaphane yield between 1.0 and 3.0 min in all but Brigadier. These data are proof of concept that steaming for 1.0-3.0 min provides less nitrile and more sulforaphane yield from a broccoli meal.

Tribological properties and morphology of bimodal elastomeric nitrile butadiene rubber networks

International Nuclear Information System (INIS)

Guo, Yin; Wang, Jiaxu; Li, Kang; Ding, Xingwu

2013-01-01

Highlights: • Bimodal elastomeric NBR as a new material was developed. • The structure of bimodal elastomeric NBR networks was determined. • The relationship between structure and mechanical properties was investigated. • The tribological properties and mechanisms of bimodal NBR were analyzed. • The benefits of bimodal NBR in the field of tribology were discussed. - Abstract: Bimodal nitrile butadiene rubber (NBR) was examined in this study. The molecular structure was determined by dynamic mechanical analysis and transmission electron microscopy. The relationship between the structure and the mechanical properties related to elastomeric tribological properties was investigated. The properties and the mechanisms of friction and wear of bimodal elastomeric NBR networks were also analyzed. The lubricating characteristics of bimodal NBR networks were revealed based on the mechanisms of friction and wear. Results show that bimodal NBR networks are similar to bimodal polydimethylsiloxane networks. The form and density of the network structure can be controlled from elastomeric networks to thermosetting resin networks. The mechanical properties of bimodal NBR networks, such as elasticity, elongation at break, fatigue characteristic, tensile strength, elastic modulus, and thermal stability can be precisely controlled following the variation in network structure. The friction, wear, and lubrication of bimodal NBR networks can be clearly described according to the principles of tribology. Common elastomers cannot simultaneously reduce friction and wear because of the different mechanisms of friction and wear; however, bimodal elastomer networks can efficiently address this problem

Propriedades de compósitos híbridos de borracha nitrílica, fibras de sisal e carbonato de cálcio Properties of nitrile rubber, sisal fiber and calcium carbonate hybrid composites

Directory of Open Access Journals (Sweden)

Marco A. Iozzi

2004-06-01

Full Text Available Neste trabalho, estudou-se a influência do teor de carbonato de cálcio nas propriedades mecânicas e térmicas da borracha nitrílica, e do comprimento das fibras de sisal nas propriedades mecânicas dos compósitos de borracha nitrílica/fibras de sisal, e borracha nitrílica/carbonato de cálcio/fibras de sisal. Os materiais foram caracterizados através de ensaios mecânicos de resistência à tração, microscopia eletrônica de varredura (MEV, e termogravimetria (TG. O melhor desempenho mecânico dos compósitos com as fibras curtas aleatoriamente distribuídas foi obtido para o comprimento das fibras de 6 mm, e teor de carbonato de 67 pcr. A análise térmica mostrou que os compósitos são estáveis até cerca de 300 °C. Os resultados mostraram que os materiais obtidos possuem uma boa relação custo/benefício tornando promissora sua utilização.In this work, nitrile rubber with sisal fibers composites and nitrile rubber with calcium carbonate and sisal fibers composites were developed. The influence from the calcium carbonate amount and size of sisal fibers on the composite properties was studied. The composites, with short fibers randomly distributed, were characterized by mechanical analysis, scanning electron microscopy (SEM, and thermogravimetric analysis (TGA. The optimal size of sisal fibers to reinforce the nitrile matrix was 6 mm. The ideal volume of calcium carbonate was 67 phr. TGA analysis demonstrated that the composites are stable up to 300 °C. The materials developed have a good cost/benefits relation, being therefore promising their utilization.

Identification of semicarbazones, thiosemicarbazones and triazine nitriles as inhibitors of Leishmania mexicana cysteine protease CPB.

Directory of Open Access Journals (Sweden)

Jörg Schröder

Full Text Available Cysteine proteases of the papain superfamily are present in nearly all eukaryotes. They play pivotal roles in the biology of parasites and inhibition of cysteine proteases is emerging as an important strategy to combat parasitic diseases such as sleeping sickness, Chagas' disease and leishmaniasis. Homology modeling of the mature Leishmania mexicana cysteine protease CPB2.8 suggested that it differs significantly from bovine cathepsin B and thus could be a good drug target. High throughput screening of a compound library against this enzyme and bovine cathepsin B in a counter assay identified four novel inhibitors, containing the warhead-types semicarbazone, thiosemicarbazone and triazine nitrile, that can be used as leads for antiparasite drug design. Covalent docking experiments confirmed the SARs of these lead compounds in an effort to understand the structural elements required for specific inhibition of CPB2.8. This study has provided starting points for the design of selective and highly potent inhibitors of L. mexicana cysteine protease CPB that may also have useful efficacy against other important cysteine proteases.

Permeation of limonene through disposable nitrile gloves using a dextrous robot hand.

Science.gov (United States)

Banaee, Sean; S Que Hee, Shane

2017-03-28

The purpose of this study was to investigate the permeation of the low-volatile solvent limonene through different disposable, unlined, unsupported, nitrile exam whole gloves (blue, purple, sterling, and lavender, from Kimberly-Clark). This study utilized a moving and static dextrous robot hand as part of a novel dynamic permeation system that allowed sampling at specific times. Quantitation of limonene in samples was based on capillary gas chromatography-mass spectrometry and the internal standard method (4-bromophenol). The average post-permeation thicknesses (before reconditioning) for all gloves for both the moving and static hand were more than 10% of the pre-permeation ones (P≤0.05), although this was not so on reconditioning. The standardized breakthrough times and steady-state permeation periods were similar for the blue, purple, and sterling gloves. Both methods had similar sensitivity. The lavender glove showed a higher permeation rate (0.490±0.031 μg/cm 2 /min) for the moving robotic hand compared to the non-moving hand (P≤0.05), this being ascribed to a thickness threshold. Permeation parameters for the static and dynamic robot hand models indicate that both methods have similar sensitivity in detecting the analyte during permeation and the blue, purple, and sterling gloves behave similarly during the permeation process whether moving or non-moving.

Permeation of limonene through disposable nitrile gloves using a dextrous robot hand

Science.gov (United States)

Banaee, Sean; S Que Hee, Shane

2017-01-01

Objectives: The purpose of this study was to investigate the permeation of the low-volatile solvent limonene through different disposable, unlined, unsupported, nitrile exam whole gloves (blue, purple, sterling, and lavender, from Kimberly-Clark). Methods: This study utilized a moving and static dextrous robot hand as part of a novel dynamic permeation system that allowed sampling at specific times. Quantitation of limonene in samples was based on capillary gas chromatography-mass spectrometry and the internal standard method (4-bromophenol). Results: The average post-permeation thicknesses (before reconditioning) for all gloves for both the moving and static hand were more than 10% of the pre-permeation ones (P≤0.05), although this was not so on reconditioning. The standardized breakthrough times and steady-state permeation periods were similar for the blue, purple, and sterling gloves. Both methods had similar sensitivity. The lavender glove showed a higher permeation rate (0.490±0.031 μg/cm2/min) for the moving robotic hand compared to the non-moving hand (P≤0.05), this being ascribed to a thickness threshold. Conclusions: Permeation parameters for the static and dynamic robot hand models indicate that both methods have similar sensitivity in detecting the analyte during permeation and the blue, purple, and sterling gloves behave similarly during the permeation process whether moving or non-moving. PMID:28111415

The host plant metabolite glucose is the precursor of diffusible signal factor (DSF) family signals in Xanthomonas campestris.

Science.gov (United States)

Deng, Yinyue; Liu, Xiaoling; Wu, Ji'en; Lee, Jasmine; Chen, Shaohua; Cheng, Yingying; Zhang, Chunyan; Zhang, Lian-Hui

2015-04-01

Plant pathogen Xanthomonas campestris pv. campestris produces cis-11-methyl-2-dodecenoic acid (diffusible signal factor [DSF]) as a cell-cell communication signal to regulate biofilm dispersal and virulence factor production. Previous studies have demonstrated that DSF biosynthesis is dependent on the presence of RpfF, an enoyl-coenzyme A (CoA) hydratase, but the DSF synthetic mechanism and the influence of the host plant on DSF biosynthesis are still not clear. We show here that exogenous addition of host plant juice or ethanol extract to the growth medium of X. campestris pv. campestris could significantly boost DSF family signal production. It was subsequently revealed that X. campestris pv. campestris produces not only DSF but also BDSF (cis-2-dodecenoic acid) and another novel DSF family signal, which was designated DSF-II. BDSF was originally identified in Burkholderia cenocepacia to be involved in regulation of motility, biofilm formation, and virulence in B. cenocepacia. Functional analysis suggested that DSF-II plays a role equal to that of DSF in regulation of biofilm dispersion and virulence factor production in X. campestris pv. campestris. Furthermore, chromatographic separation led to identification of glucose as a specific molecule stimulating DSF family signal biosynthesis in X. campestris pv. campestris. (13)C-labeling experiments demonstrated that glucose acts as a substrate to provide a carbon element for DSF biosynthesis. The results of this study indicate that X. campestris pv. campestris could utilize a common metabolite of the host plant to enhance DSF family signal synthesis and therefore promote virulence. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

μ-Hexa­thio­metadiphosphato-bis­[(1,4,7,10,13,16-hexa­oxa­cyclo­octa­decane-κ6 O)rubidium] aceto­nitrile disolvate

Science.gov (United States)

Gjikaj, Mimoza; Pook, Niels-Patrick; Qarri, Flora

2013-01-01

The asymmetric unit of the title compound, [Rb2(P2S6)(C12H24O6)2]·2CH3CN, contains one half of an [Rb(18-crown-6)2]2[P2S6] unit and one aceto­nitrile solvent mol­ecule. The [Rb(18-crown-6)]2[P2S6] unit is completed by inversion symmetry. Its Rb+ ion is situated near the centre of the macrocyclic cavity, but is displaced by 0.8972 (1) Å from the O atoms of the crown in the direction of the [P2S6]2− moiety. The overall coordination number of the cation is eight, defined by the six crown ether O atoms and by two terminal S atoms of the [P2S6]2− anion. The hexa­thio­metadiphosphate anion is built up from two tetra­hedral PS4 units joined together by a common edge. The crystal structure is characterized by alternating layers of [Rb(18-crown-6)]2[P2S6] and aceto­nitrile solvent mol­ecules stacked along [010]. PMID:24860286

The rearrangements of naphthylnitrenes: UV/Vis and IR spectra of azirines, cyclic ketenimines, and cyclic nitrile ylides.

Science.gov (United States)

Maltsev, Alexander; Bally, Thomas; Tsao, Meng-Lin; Platz, Matthew S; Kuhn, Arvid; Vosswinkel, Michael; Wentrup, Curt

2004-01-14

Ar matrix photolysis of 1- and 2-naphthyl azides 3 and 4 at 313 nm initially affords the singlet naphthyl nitrenes, (1)()1 and (1)()2. Relaxation to the corresponding lower energy, persistent triplet nitrenes (3)()1 and (3)()2 competes with cyclization to the azirines 15 and 18, which can also be formed photochemically from the triplet nitrenes. On prolonged irradiation, the azirines can be converted to the seven-membered cyclic ketenimines 10 and 13, respectively, as described earlier by Dunkin and Thomson. However, instead of the o-quinoid ketenimines 16 and 19, which are the expected primary ring-opening products of azirines 15 and 18, respectively, we observed their novel bond-shift isomers 17 and 20, which may be formally regarded as cyclic nitrile ylides. The existence of such ylidic heterocumulenes has been predicted previously, but this work provides the first experimental observation of such species. The factors which are responsible for the special stability of the ylidic species 17 and 20 are discussed.

Enhancement of Compatibility between Ultrahigh-Molecular-Weight Polyethylene Particles and Butadiene.Nitrile Rubber Matrix with Nanoscale Ceramic Particles and Characterization of Evolving Layer

International Nuclear Information System (INIS)

Shadrinov, Nikolay V.; Sokolova, Marina D.; Cho, Jinho; Okhlopkova, A. A.; Lee, Jungkeun; Jeong, Daeyong

2013-01-01

This article examines the modification of surface properties of ultrahigh-molecular-weight polyethylene (UHMWPE) with nanoscale ceramic particles to fabricate an improved composite with butadiene.nitrile rubber (BNR). Adhesion force data showed that ceramic zeolite particles on the surface of UHMWPE modulated the surface state of the polymer and increased its compatibility with BNR. Atomic force microscopy phase images showed that UHMWPE made up the microphase around the zeolite particles and formed the evolving layer with a complex interface. The complex interface resulted in improvements in the mechanical properties of the composite, especially its low-temperature resistance coefficients, thereby improving its performance in low-temperature applications

Studies of bio-mimetic medium of ionic and non-ionic micelles by a simple charge transfer fluorescence probe N,N-dimethylaminonapthyl-(acrylo)-nitrile

Science.gov (United States)

Samanta, Anuva; Paul, Bijan Kumar; Guchhait, N.

2011-05-01

In this report we have studied micellization process of anionic, cationic and non-ionic surfactants using N,N-dimethylaminonapthyl-(acrylo)-nitrile (DMANAN) as an external fluorescence probe. Micropolarity, microviscosity, critical micellar concentration of these micelles based on steady state absorption and fluorescence and time resolved emission spectroscopy of the probe DMANAN show that the molecule resides in the micelle-water interface for ionic micelles and in the core for the non-ionic micelle. The effect of variation of pH of the micellar solution as well as fluorescence quenching measurements of DMANAN provide further support for the location of the probe in the micelles.

NCBI nr-aa BLAST: CBRC-CREM-01-1371 [SEVENS

Lifescience Database Archive (English)

Full Text Available CBRC-CREM-01-1371 ref|YP_926913.1| Phosphopyruvate hydratase [Shewanella amazonensi...s SB2B] gb|ABL99243.1| Phosphopyruvate hydratase [Shewanella amazonensis SB2B] YP_926913.1 6e-90 71% ...

Predicting the solubility of gases in Nitrile Butadiene Rubber in extreme conditions using molecular simulation

Science.gov (United States)

Khawaja, Musab; Molinari, Nicola; Sutton, Adrian; Mostofi, Arash

In the oil and gas industry, elastomer seals play an important role in protecting sensitive monitoring equipment from contamination by gases - a problem that is exacerbated by the high pressures and temperatures found down-hole. The ability to predict and prevent such permeative failure has proved elusive to-date. Nitrile butadiene rubber (NBR) is a common choice of elastomer for seals due to its resistance to heat and fuels. In the conditions found in the well it readily absorbs small molecular weight gases. How this behaviour changes quantitatively for different gases as a function of temperature and pressure is not well-understood. In this work a series of fully atomistic simulations are performed to understand the effect of extreme conditions on gas solubility in NBR. Widom particle insertion is used to compute solubilities. The importance of sampling and allowing structural relaxation upon compression are highlighted, and qualitatively reasonable trends reproduced. Finally, while at STP it has previously been shown that the solubility of CO2 is higher than that of He in NBR, we observe that under the right circumstances it is possible to reverse this trend.

Ionic elastomers based on carboxylated nitrile rubber (XNBR and magnesium aluminum layered double hydroxide (hydrotalcite

Directory of Open Access Journals (Sweden)

A. Laskowska

2014-06-01

Full Text Available The presence of carboxyl groups in carboxylated nitrile butadiene rubber (XNBR allows it to be cured with different agents. This study considers the effect of crosslinking of XNBR by magnesium aluminum layered double hydroxide (MgAl-LDH, known also as hydrotalcite (HT, on rheometric, mechano-dynamical and barrier properties. Results of XNBR/HT composites containing various HT loadings without conventional curatives are compared with XNBR compound crosslinked with commonly used zinc oxide. Hydrotalcite acts as an effective crosslinking agent for XNBR, as is particularly evident from rheometric and Fourier transform infrared spectroscopy (FTIR studies. The existence of ionic crosslinks was also detected by dynamic mechanical analysis (DMA of the resulting composites. DMA studies revealed that the XNBR/HT composites exhibited two transitions – one occurring at low temperature is associated to the Tg of elastomer and the second at high temperature corresponds to the ionic transition temperature Ti. Simultaneous application of HT as a curing agent and a filler may deliver not only environmentally friendly, zinc oxide-free rubber product but also ionic elastomer composite with excellent mechanical, barrier and transparent properties.

Swelling and tribological properties of melt-mixed fluoroelastomer/nitrile rubber blends under crude oil

Science.gov (United States)

Tagelsir, Yasin; Li, San-Xi; Lv, Xiaoren; Wang, Shijie; Wang, Song; Osman, Zeinab

2018-01-01

The melt-mixed fluoroelastomer (FKM)/ nitrile rubber (NBR) blends of (90/10, 80/20, 70/30, 60/40 and 50/50) ratios with same hardness were prepared, and their swelling and tribological properties under crude oil were investigated for the purpose of developing high performance cost-effective elastomers meeting requirement of oil extraction progressive cavity pump stator. Differential scanning calorimetry confirmed compatible blend system for all blends. Field emission scanning electron microscopy (FE-SEM) showed co-continuous morphology of 200-400 nm phase size for all blends, expect FKM/NBR (90/10) which exhibited partially continuous phase morphology of 100-250 nm phase size. The results of swelling and linear wear tests under crude oil indicated that swelling percentage, coefficient of friction and specific wear rate of FKM/NBR blends were much better than NBR, with FKM/NBR (90/10 and 80/20) showing swelling percentage and specific wear rate very close to FKM. Attenuated total reflectance-Fourier transform infrared spectroscopy disclosed that fracture of macromolecular chains was the main mechanochemical effect of unswollen and swollen worn surfaces, in addition to oxygenated degradation detected with increasing NBR ratio in the blends. The fracture of macromolecular chains resulted in slight fatigue wear mechanism, which was also confirmed by FE-SEM of the worn surfaces.

Could nitrile derivatives of turnip (Brassica rapa) glucosinolates be hepato- or cholangiotoxic in cattle?

Science.gov (United States)

Collett, Mark G; Stegelmeier, Bryan L; Tapper, Brian A

2014-07-30

Turnip (Brassica rapa ssp. rapa) and rape (Brassica napus ssp. biennis) and other brassica forage crops are regarded as "safe" feed for cattle during late summer and fall in the North Island of New Zealand when high Pithomyces chartarum spore counts in pastures frequently lead to sporidesmin toxicity (facial eczema). Sporadic acute severe cases of turnip photosensitization in dairy cows characteristically exhibit high γ-glutamyl transferase and glutamate dehydrogenase serum enzyme activities that mimic those seen in facial eczema. The two diseases can, however, be distinguished by histopathology of the liver, where lesions, in particular those affecting small bile ducts, differ. To date, the hepato-/cholangiotoxic phytochemical causing liver damage in turnip photosensitization in cattle is unknown. Of the hydrolysis products of the various glucosinolate secondary compounds found in high concentrations in turnip and rape, work has shown that nitriles and epithionitriles can be hepatotoxic (and nephro- or pancreatotoxic) in rats. These derivatives include β-hydroxy-thiiranepropanenitrile and 3-hydroxy-4-pentenenitrile from progoitrin; thiiranepropanenitrile and 4-pentenenitrile from gluconapin; thiiranebutanenitrile and 5-hexenenitrile from glucobrassicanapin; phenyl-3-propanenitrile from gluconasturtiin; and indole-3-acetonitrile from glucobrassicin. This perspective explores the possibility of the preferential formation of such derivatives, especially the epithionitriles, in acidic conditions in the bovine rumen, followed by absorption, hepatotoxicity, and secondary photosensitization.

Sound Absorption Properties Of Single-Hole Hollow Polyester Fiber Reinforced Hydrogenated Carboxyl Nitrile Rubber Composites

Directory of Open Access Journals (Sweden)

Jie Hong

2017-09-01

Full Text Available A series of single-hole hollow polyester fiber (SHHPF reinforced hydrogenated carboxyl nitrile rubber (HXNBR composites were fabricated. In this study, the sound absorption property of the HXNBR/SHHPF composite was tested in an impedance tube, the composite morphology was characterized by scanning electron microscope (SEM, and the tensile mechanical property was measured by strength tester. The results demonstrated that a remarkable change in sound absorption can be observed by increasing the SHHPF content from 0% to 40%. In the composite with 40% SHHPF in 1 mm thickness, the sound absorption coefficient reached 0.671 at 2,500 Hz; the effective bandwidth was 1,800-2,500 Hz for sound absorption coefficient larger than 0.2. But the sound absorption property of the composite deteriorated when the SHHPF content increased to 50% in 1 mm thickness. While with 20% SHHPF proportion, the sound absorption property was improved by increasing the thickness of composites from 1 to 5 mm. Compared with the pure HXNBR of the same thickness, the tensile mechanical property of the composite improved significantly by increasing the SHHPF proportion. As a lightweight composite with excellent sound absorption property, the HXNBR/SHHPF composite has potential practical application value in the fields of engineering.

Bottom-up electrochemical preparation of solid-state carbon nanodots directly from nitriles/ionic liquids using carbon-free electrodes and the applications in specific ferric ion detection and cell imaging.

Science.gov (United States)

Niu, Fushuang; Xu, Yuanhong; Liu, Mengli; Sun, Jing; Guo, Pengran; Liu, Jingquan

2016-03-14

Carbon nanodots (C-dots), a new type of potential alternative to conventional semiconductor quantum dots, have attracted numerous attentions in various applications including bio-chemical sensing, cell imaging, etc., due to their chemical inertness, low toxicity and flexible functionalization. Various methods including electrochemical (EC) methods have been reported for the synthesis of C-dots. However, complex procedures and/or carbon source-containing electrodes are often required. Herein, solid-state C-dots were simply prepared by bottom-up EC carbonization of nitriles (e.g. acetonitrile) in the presence of an ionic liquid [e.g. 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6)], using carbon-free electrodes. Due to the positive charges of BMIM(+) on the C-dots, the final products presented in a precipitate form on the cathode, and the unreacted nitriles and BMIMPF6 can be easily removed by simple vacuum filtration. The as-prepared solid-state C-dots can be well dispersed in an aqueous medium with excellent photoluminescence properties. The average size of the C-dots was found to be 3.02 ± 0.12 nm as evidenced by transmission electron microscopy. Other techniques such as UV-vis spectroscopy, fluorescence spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy were applied for the characterization of the C-dots and to analyze the possible generation mechanism. These C-dots have been successfully applied in efficient cell imaging and specific ferric ion detection.

Reinforcement of Multiwalled Carbon Nanotube in Nitrile Rubber: In Comparison with Carbon Black, Conductive Carbon Black, and Precipitated Silica

Directory of Open Access Journals (Sweden)

Atip Boonbumrung

2016-01-01

Full Text Available The properties of nitrile rubber (NBR reinforced by multiwalled carbon nanotube (MWCNT, conductive carbon black (CCB, carbon black (CB, and precipitated silica (PSi were investigated via viscoelastic behavior, bound rubber content, electrical properties, cross-link density, and mechanical properties. The filler content was varied from 0 to 15 phr. MWCNT shows the greatest magnitude of reinforcement considered in terms of tensile strength, modulus, hardness, and abrasion resistance followed by CCB, CB, and PSi. The MWCNT filled system also exhibits extremely high levels of filler network and trapped rubber even at relatively low loading (5 phr leading to high electrical properties and poor dynamic mechanical properties. Although CCB possesses the highest specific surface area, it gives lower level of filler network than MWCNT and also gives the highest elongation at break among all fillers. Both CB and PSi show comparable degree of reinforcement which is considerably lower than CCB and MWCNT.

Alkene Metathesis Catalysis: A Key for Transformations of Unsaturated Plant Oils and Renewable Derivatives

Directory of Open Access Journals (Sweden)

Dixneuf Pierre H.

2016-03-01

Full Text Available This account presents the importance of ruthenium-catalysed alkene cross-metathesis for the catalytic transformations of biomass derivatives into useful intermediates, especially those developed by the authors in the Rennes (France catalysis team in cooperation with chemical industry. The cross-metathesis of a variety of functional alkenes arising from plant oils, with acrylonitrile and fumaronitrile and followed by catalytic tandem hydrogenation, will be shown to afford linear amino acid derivatives, the precursors of polyamides. The exploration of cross-metathesis of bio-sourced unsaturated nitriles with acrylate with further catalytic hydrogenation has led to offer an excellent route to α,ω-amino acid derivatives. That of fatty aldehydes has led to bifunctional long chain aldehydes and saturated diols. Two ways of access to functional dienes by ruthenium-catalyzed ene-yne cross-metathesis of plant oil alkene derivatives with alkynes and by cross-metathesis of bio-sourced alkenes with allylic chloride followed by catalytic dehydrohalogenation, are reported. Ricinoleate derivatives offer a direct access to chiral dihydropyrans and tetrahydropyrans via ring closing metathesis. Cross-metathesis giving value to terpenes and eugenol for the straightforward synthesis of artificial terpenes and functional eugenol derivatives without C=C bond isomerization are described.

Nitrile rubber - based nanocomposites prepared by melt mixing: effect of the mixing parameters on mechanical, dynamic-mechanical and creep behavior

Directory of Open Access Journals (Sweden)

Bluma G. Soares

2010-01-01

Full Text Available Nanocomposites constituted by nitrile rubber matrix and Cloisite 15A (OC15A as the organoclay were prepared by melt blending and cured with the m-phenylene-bis-maleimide (BMI/dicumyl peroxide (DCP system. The effect of mixing parameters on the clay dispersion was evaluated, including mixing temperature and time, and rotor speed of the internal mixer. The organoclay effectively accelerated the vulcanization reaction of NBR, which was attributed to the presence of the alkylammonium salt as the intercalant. All nanocomposites displayed improved tensile properties indicating a good reinforcing action of the clay. Also, the creep compliance was substantially reduced with the incorporation of the clay. X-ray diffraction studies showed the presence of intercalated and deintercalated clay population. The mixing parameters did not have an important effect on clay dispersion and properties of NBR-clay nanocomposites, except for the creep behavior.

Facile Synthesis of N-Tosyl Aza-Baylis-Hillman Adducts of Acrylamide via a Pd-Catalyzed Hydration of Nitrile to Amide

International Nuclear Information System (INIS)

Kim, Eun Sun; Kim, Yu Mi; Kim, Jae Nyoung

2010-01-01

We developed an efficient palladium-catalyzed two-step protocol for the synthesis of N-tosyl aza-Baylis-Hillman adducts of acrylamide. The method involved the preparation of the corresponding Baylis-Hillman adducts of acrylonitrile and the following Pd-catalyzed hydration of nitrile with acetaldoxime. The Baylis-Hillman reaction, which involves the coupling of activated vinyl compounds with electrophiles under the catalytic influence of a tertiary amine, gives rise to adducts, so called Baylis-Hillman adducts, with a new stereocenter and has proven to be a very useful carbon-carbon bond-forming method in the synthesis of highly functionalized molecules. As the activated vinyl compounds, various compounds have been used in the Baylis-Hillman reaction including acrylates, acrylonitrile, vinyl ketones, vinyl sulfones and acrylamides. However, among the activated vinyl compounds acrylamide has not been used much for the synthesis of the corresponding Baylis-Hillman adducts due to its sluggish reactivity

Hydrophil diaphragms on the basis of perfluorated copolymers FEP and polyacryl nitrile: Manufacture by radiation- initiated grafting and their use for pervaporation

International Nuclear Information System (INIS)

Scholz, H.

1986-01-01

The radiation-initiated grafting copolymerisation of hydrophil monomers to FEP, a copolymer of tetrafluorethene and hexafluorpropene and to polyacryl nitrile (PAN) was examined in this dissertation. The grafted products were used as diaphragms for the separation of water-ethanol mixtures by pervaporation. Water was separated through the diaphragm from the mixture in the pervaporation experiments. It was shown how the mechanical properties of the basic polymer affect the interaction between basic polymer and grafted polymer and how the grafting conditions affect the diaphragm properties. By grafting acrylic acid on to the basic polymers FEP and PAN, very good results were achieved for the water-ethanol separation, if the diaphragms were used in the K form. The selectivity of PAN-g-acrylic acid-K for water reached values of α > 1000. (orig./RB) [de

Structural studies of MFE-1: the 1.9 A crystal structure of the dehydrogenase part of rat peroxisomal MFE-1.

Science.gov (United States)

Taskinen, Jukka P; Kiema, Tiila R; Hiltunen, J Kalervo; Wierenga, Rik K

2006-01-27

The 1.9 A structure of the C-terminal dehydrogenase part of the rat peroxisomal monomeric multifunctional enzyme type 1 (MFE-1) has been determined. In this construct (residues 260-722 and referred to as MFE1-DH) the N-terminal hydratase part of MFE-1 has been deleted. The structure of MFE1-DH shows that it consists of an N-terminal helix, followed by a Rossmann-fold domain (domain C), followed by two tightly associated helical domains (domains D and E), which have similar topology. The structure of MFE1-DH is compared with the two known homologous structures: human mitochondrial 3-hydroxyacyl-CoA dehydrogenase (HAD; sequence identity is 33%) (which is dimeric and monofunctional) and with the dimeric multifunctional alpha-chain (alphaFOM; sequence identity is 28%) of the bacterial fatty acid beta-oxidation alpha2beta2-multienzyme complex. Like MFE-1, alphaFOM has an N-terminal hydratase part and a C-terminal dehydrogenase part, and the structure comparisons show that the N-terminal helix of MFE1-DH corresponds to the alphaFOM linker helix, located between its hydratase and dehydrogenase part. It is also shown that this helix corresponds to the C-terminal helix-10 of the hydratase/isomerase superfamily, suggesting that functionally it belongs to the N-terminal hydratase part of MFE-1.

Crystal structure of tri­chlorido­(4'-ferrocenyl-2,2':6',2''-terpyridine-[kappa]3N,N',N'')iridium(III) aceto­nitrile disolvate

KAUST Repository

Davaasuren, Bambar

2015-02-25

In the title compound, [FeIr(C5H5)(C20H14N3)Cl3]·2CH3CN, the central IrIII atom is sixfold coordinated by three chloride ligands and three terpyridine N atoms in a slightly distorted octa­hedral fashion. The terpyridine ligand is functionalized at the 4\\'-position with a ferrocenyl group, the latter being in an eclipsed conformation. In the crystal, mol­ecules are stacked in rows parallel to [001], with the aceto­nitrile solvent mol­ecules situated between the rows. An extensive network of intra- and inter­molecular C-H...Cl inter­actions is present, stabilizing the three-dimensional structure.

Synthesis of new α-amino nitriles with insecticidal action on Aedes aegypti (Diptera: Culicidae

Directory of Open Access Journals (Sweden)

Andrés G. Rueda

2018-04-01

Full Text Available Aedes aegypti is the principal vector of arboviral pathogens that may cause diseases as dengue fever, chikungunya and zika. The harmful environmental effects of commercial pesticides coalesced with the development of insecticide-resistant populations encourage the discovery and generation of new alternative products as a tool to reduce the incidence of vector-borne diseases. In this work, through the classic three component Strecker reaction of commercial benzaldehydes, cyclic secondary amines and KCN, a new series of nine α-amino nitriles, girgensohnine analogs, has been synthetized and screened for larvicide and adulticide properties against A. aegypti, one of the dominant vectors of dengue, chikungunya and zika in tropical and subtropical areas all over the world. Molecules 3 and 4 were identified as potential larvicidal agents with LC50 values of 50.55 and 69.59 ppm, respectively. Molecule 3 showed 100% of mortality after 2 h of treatment when a concentration of 30 ppm in adulticidal assays was evaluated. Additionally, in order to elucidate the mode of action of these molecules, their acetylcholinesterase (AChE inhibitory properties were evaluated using the Ellman assay. It was found that the molecules possess a weak AChE inhibitory activity with IC50 values between 148.80 and 259.40 μM, indicating that AChE could not be a principal target for insecticide activity. Keywords: Arthropod-borne diseases, Girgensohnine analogs, Strecker reaction, Insecticidal activity, Vector control

Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator

Directory of Open Access Journals (Sweden)

Fatemeh Arabgol

2013-02-01

Full Text Available Thermal insulation of rocket motor chamber is one of the most important functions of elastomeric ablative material. Combustion of solid rocket motor propellant produces turbulent media containing gases with a velocity more than 1000 m/s, temperature and pressure more than 3000°C and 10 MPa, respectively,which destroys all metallic alloys. Elastomeric nanocomposite heat insulators are more attractive subjects in comparison to their non-elastomeric counterparts, due to their excellent thermal stresses and larger deformation bearing capacity. Nitrile rubber with high thermal properties is a proper candidate in such applications. Development in ablation performance of these heat shields is considered as an important challenge nowadays. A few works have been recently carried out using organoclay to enhancethe ablation and mechanical properties of heat insulators. In this work, an elastomeric heat insulator with superior ablative and mechanical properties was presented using nanotechnology. The results showed that an elastomeric nanocomposite heat insulator containing 15 wt% organoclay exhibits superior characteristics compared to its composite counterpart such as: 46% more tensile strength, 60% more elongationat-break, 1.7 times higher modulus (at 100% strain, 62% higher “insulating index number” and 36% lower mass ablation and erosion rates under a standard test with a heat flux of 2500 kW/m2 for 15 s.

35,37Cl, and 79,81Br, and 69,71Ga nuclear quadrupole resonance of complexes of gallium trichloride and aluminum bromide with nitriles and amines

International Nuclear Information System (INIS)

Popkova, L.A.; Gur'yanova, E.N.; Muromtsev, V.I.; Zhukov, A.P.

1989-01-01

The formation of an intermolecular bond in complexes of the electron donor-acceptor (DA) type is accompanied by a redistribution of electron density in both components of the complex. Valuable information on the character of the changes undergone by the donor and acceptor molecules in complexation can be obtained from NQR spectrometry. The present work is aimed at correlating NQR frequencies and multiplicity of spectra with the redistribution of electron density among orbitals of the central atom and the transfer of electron density to the halogen atoms upon complexation. The authors have investigated the 35,37 Cl, 69,71 Ga, and 79,81 Br NQR spectra of complexes of gallium trichloride and aluminum bromide with nitriles and amines

Structural and biochemical characterization of a nitrilase from the thermophilic bacterium, Geobacillus pallidus RAPc8

CSIR Research Space (South Africa)

Williamson, DS

2010-09-01

Full Text Available . In common with the plant nitrilases, the recombinant G. pallidus RAPc8 enzyme produced both acid and amide products from nitrile substrates. Electron microscopy and image classification showed complexes having crescentlike, “c-shaped”, circular and “figure...

Transport properties of carboxylated nitrile butadiene rubber (XNBR)-nanoclay composites; a promising material for protective gloves in occupational exposures.

Science.gov (United States)

Mirzaei Aliabadi, Mostafa; Naderi, Ghasem; Shahtaheri, Seyed Jamaleddin; Forushani, Abbas Rahimi; Mohammadfam, Iraj; Jahangiri, Mehdi

2014-02-28

This study was conducted in response to one of the research needs of National Institute for Occupational Safety and Health (NIOSH), i.e. the application of nanomaterials and nanotechnology in the field of occupational safety and health. In order to fill this important knowledge gap, the equilibrium solubility and diffusion of carbon tetrachloride and ethyl acetate through carboxylated nitrile butadiene rubber (XNBR)-clay nanocomposite, as a promising new material for chemical protective gloves (or barrier against the transport of organic solvent contaminant), were examined by swelling procedure. Near Fickian diffusion was observed for XNBR based nanocomposites containing different amounts of nanoclay. Decontamination potential is a key factor in development of a new material for reusable chemical protective gloves applications, specifically for routine or highly toxic exposures. A thermal decontamination regime for nanocomposite was developed for the first time. Then, successive cycles of exposure/decontamination for nanocomposite were performed to the maximum 10 cycles for the first time. This result confirms that the two selected solvents cannot deteriorate the rubber-nanoclay interaction and, therefore, such gloves can be reusable after decontamination.

An efficient fermentation method for the degradation of cyanogenic glycosides in flaxseed.

Science.gov (United States)

Wu, C-F; Xu, X-M; Huang, S-H; Deng, M-C; Feng, A-J; Peng, J; Yuan, J-P; Wang, J-H

2012-01-01

Recently, flaxseed has become increasingly popular in the health food market because it contains a considerable amount of specific beneficial nutrients such as lignans and omega-3 fatty acids. However, the presence of cyanogenic glycosides (CGs) in flaxseed severely limits the exploitation of its health benefits and nutritive value. We, therefore, developed an effective fermentation method, optimised by response surface methodology (RSM), for degrading CGs with an enzymatic preparation that includes 12.5% β-glucosidase and 8.9% cyanide hydratase. These optimised conditions resulted in a maximum CG degradation level of 99.3%, reducing the concentration of cyanide in the flaxseed power from 1.156 to 0.015 mg g(-1) after 48 h of fermentation. The avoidance of steam heat to evaporate hydrocyanic acid (HCN) results in lower energy consumption and no environmental pollution. In addition, the detoxified flaxseed retained the beneficial nutrients, lignans and fatty acids at the same level as untreated flaxseed, and this method could provide a new means of removing CGs from other edible plants, such as cassava, almond and sorghum by simultaneously expressing cyanide hydratase and β-glucosidase.

Endocrine disruptive effects of chemicals eluted from nitrile-butadiene rubber gloves using reporter gene assay systems.

Science.gov (United States)

Satoh, Kanako; Nonaka, Ryouichi; Ohyama, Ken-ichi; Nagai, Fumiko; Ogata, Akio; Iida, Mitsuru

2008-03-01

Disposable gloves made of nitrile-butadiene rubber (NBR) are used for contact with foodstuffs rather than polyvinyl chloride gloves containing di(2-ethylhexyl)phthalate (DEHP), because endocrine-disruptive effects are suspected for phthalate diesters including DEHP. However, 4,4'-butylidenebis(6-t-butyl-m-cresol) (BBBC), 2,4-di-t-butylphenol, and 2,2,4-trimetyl-1,3-pentanediol diisobutyrate can be eluted from NBR gloves, and possibly also detected in food. In this study, we examined the endocrine-disrupting effects of these chemicals via androgen receptor (AR) and estrogen receptor (ER)-mediated pathways using stably transfected reporter gene cell lines expressing AR (AR-EcoScreen system) and ER (MVLN cells), respectively. We also examined the binding activities of these chemicals to AR and ER. The IC50 value of BBBC for antagonistic androgen was in the range of 10(-6)M. The strength of inhibition was about 5 times that of a known androgen antagonist, 1,1'-(2,2-dichloroethylidene)bis[4-chlorobenzene] (p,p'-DDE), and similar to that of bisphenol A. The IC50 value of BBBC for antagonistic estrogen was in the range of 10(-6)M. These results suggest that BBBC and its structural homologue, 4,4'-thiobis(6-t-butyl-m-cresol) are androgen and estrogen antagonists. It is therefore necessary to study these chemicals in vivo, and clarify their effect on the endocrine system.

Wear resistance and friction reduction in acrylo nitrile butadiene rubber through hybrid combination of graphite flakes and nano tungsten disulphide

Energy Technology Data Exchange (ETDEWEB)

Agrawal, Neha, E-mail: neha87bhu@gmail.com [Defence Material Store Research Development and Establishment (DMSRDE), DRDO, GT Road, Kanpur 208013, U.P (India); Indian Institute of Technology Bombay, Powai, Mumbai 400076, Maharashtra (India); Pandey, Akanksha; Parihar, A. S.; Mishra, A. K.; Mukhopadhyay, K.; Prasad, N. E. [Defence Material Store Research Development and Establishment (DMSRDE), DRDO, GT Road, Kanpur 208013, U.P (India); Gandhi, M. N.; Bhattacharyya, A. R. [Indian Institute of Technology Bombay, Powai, Mumbai 400076, Maharashtra (India)

2016-05-06

Friction and wear have considerable role in the life span of two interacting parts. Incorporation of nanofillers in polymers/elastomers matrix causes commendable changes in its tribologicalproperties. The main purpose of this work is to reduce the coefficient of friction and wear rate of Acrylo Nitrile Butadiene rubber (NBR). To achieve such objective traditionally well knownlubricants graphite(G), tungsten disulphide (WS{sub 2}) and there hybrid combination was incorporated in NBR matrix. Effect of applied load (force) and concentration of fillers on tribological properties of NBR had been studied. The filler incorporation enhanced the hardnessby 8%, showed resistance to hydraulic oil and aging effect also got improved significantly. A particular optimized concentration of NBR with hybrid combination of 2% WS{sub 2} and 4% Graphite showed minimum coefficient of friction as well as wear rate. A hypothesis could be attributed that similar lamellar structure of WS{sub 2} and Graphite along with formation of a stable nanoscale disulfide tribofilmcould result in lowering of friction. These substantially improved properties of nanoreinforced rubber materials would definitely pave promising path for plethora of potential technological applications.

Wear resistance and friction reduction in acrylo nitrile butadiene rubber through hybrid combination of graphite flakes and nano tungsten disulphide

International Nuclear Information System (INIS)

Agrawal, Neha; Pandey, Akanksha; Parihar, A. S.; Mishra, A. K.; Mukhopadhyay, K.; Prasad, N. E.; Gandhi, M. N.; Bhattacharyya, A. R.

2016-01-01

Friction and wear have considerable role in the life span of two interacting parts. Incorporation of nanofillers in polymers/elastomers matrix causes commendable changes in its tribologicalproperties. The main purpose of this work is to reduce the coefficient of friction and wear rate of Acrylo Nitrile Butadiene rubber (NBR). To achieve such objective traditionally well knownlubricants graphite(G), tungsten disulphide (WS_2) and there hybrid combination was incorporated in NBR matrix. Effect of applied load (force) and concentration of fillers on tribological properties of NBR had been studied. The filler incorporation enhanced the hardnessby 8%, showed resistance to hydraulic oil and aging effect also got improved significantly. A particular optimized concentration of NBR with hybrid combination of 2% WS_2 and 4% Graphite showed minimum coefficient of friction as well as wear rate. A hypothesis could be attributed that similar lamellar structure of WS_2 and Graphite along with formation of a stable nanoscale disulfide tribofilmcould result in lowering of friction. These substantially improved properties of nanoreinforced rubber materials would definitely pave promising path for plethora of potential technological applications.

Wear resistance and friction reduction in acrylo nitrile butadiene rubber through hybrid combination of graphite flakes and nano tungsten disulphide

Science.gov (United States)

Agrawal, Neha; Pandey, Akanksha; Parihar, A. S.; Mishra, A. K.; Gandhi, M. N.; Bhattacharyya, A. R.; Mukhopadhyay, K.; Prasad, N. E.

2016-05-01

Friction and wear have considerable role in the life span of two interacting parts. Incorporation of nanofillers in polymers/elastomers matrix causes commendable changes in its tribologicalproperties. The main purpose of this work is to reduce the coefficient of friction and wear rate of Acrylo Nitrile Butadiene rubber (NBR). To achieve such objective traditionally well knownlubricants graphite(G), tungsten disulphide (WS2) and there hybrid combination was incorporated in NBR matrix. Effect of applied load (force) and concentration of fillers on tribological properties of NBR had been studied. The filler incorporation enhanced the hardnessby 8%, showed resistance to hydraulic oil and aging effect also got improved significantly. A particular optimized concentration of NBR with hybrid combination of 2% WS2 and 4% Graphite showed minimum coefficient of friction as well as wear rate. A hypothesis could be attributed that similar lamellar structure of WS2 and Graphite along with formation of a stable nanoscale disulfide tribofilmcould result in lowering of friction. These substantially improved properties of nanoreinforced rubber materials would definitely pave promising path for plethora of potential technological applications.

In situ electrochemical SFG/DFG study of CN- and nitrile adsorption at Au from 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ionic liquid([BMP][TFSA]) containing 4-{2-[1-(2-cyanoethyl)-1,2,3,4-tetrahydroquinolin-6-yl]diazenyl} benzonitrile (CTDB) and K[Au(CN)₂].

Science.gov (United States)

Bozzini, Benedetto; Busson, Bertrand; Gayral, Audrey; Humbert, Christophe; Mele, Claudio; Six, Catherine; Tadjeddine, Abderrahmane

2012-06-25

In this paper we report an in situ electrochemical Sum-/Difference Frequency Generation (SFG/DFG) spectroscopy investigation of the adsorption of nitrile and CN⁻ from the ionic liquid 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl) amide ([BMP][TFSA]) containing 4-{2-[1-(2-cyanoethyl)-1,2,3,4-tetrahydroquinolin-6-yl]-diazenyl}benzonitrile (CTDB) at Au electrodes in the absence and in the presence of the Au-electrodeposition process from K[Au(CN)₂]. The adsorption of nitrile and its coadsorption with CN⁻ resulting either from the cathodic decomposition of the dye or from ligand release from the Au(I) cyanocomplex yield potential-dependent single or double SFG bands in the range 2,125-2,140 cm⁻¹, exhibiting Stark tuning values of ca. 3 and 1 cm⁻¹ V⁻¹ in the absence and presence of electrodeposition, respectively. The low Stark tuning found during electrodeposition correlates with the cathodic inhibiting effect of CTDB, giving rise to its levelling properties. The essential insensitivity of the other DFG parameters to the electrodeposition process is due to the growth of smooth Au.

Understanding interpenetrating-polymer-network-like porous nitrile butadiene rubber hybrids by their long-period miscibility

International Nuclear Information System (INIS)

Zhang, Jihua; Wang, Lifeng; Zhao, Yunfeng

2013-01-01

Highlights: • Hydrogen bonds are introduced into NBR to develop its IPN-like porous hybrids. • NBR is partly miscible with AO-60. • AO-60 possesses the viscoelastic behavior resembling that of polymers. • Phase separation aggravates and AO-60 crystallizes in the durations. • The porous hybrids may have potential damping applications. - Abstract: In this article, tetrakis [methylene-3-(3, 5-di-tert-butyl-4-hydroxy phenyl) propionyloxy] methane (AO-60) with hydrogen bonds was designed to interpenetrate into the chemical crosslinking bonds of nitrile butadiene rubber (NBR) and then porous materials were prepared. Scanning electron microscopy (SEM), atomic force microscopy (AFM) images and dynamic mechanical analyses (DMA) demonstrate that NBR is partly miscible with AO-60 which induces the micro-pores and interpenetrating-polymer-network (IPN)-like phase morphology in the hybrids. The wide double tan δ peak in DMA curve displays that AO-60 possesses similar viscoelastic behaviors to polymers which come from supramolecular interactions between polar groups of NBR chains and hydroxyl (OH) groups of AO-60. To further understand the supramolecular abilities of AO-60 in the rubber, the long-period observations for their miscibility are conducted. With the increase of durations, the hydrogen bond network from AO-60 is weakened. The phase separation between AO-60 and NBR is aggravated and even extremely few AO-60 crystallizes which develops multi-scale porous morphology in the hybrids. It is believed that these findings can serve as a guide for the designs of the IPN-like hybrids with small molecule substances and their applications of damping materials

Isolation and identification of some unknown substances in disposable nitrile-butadiene rubber gloves used for food handling.

Science.gov (United States)

Mutsuga, M; Wakui, C; Kawamura, Y; Maitani, T

2002-11-01

In Japan, disposable gloves made from nitrile-butadiene rubber (NBR) are frequently used in contact with foods. In a previous paper, we investigated substances migrating from various gloves made of polyvinyl chloride, polyethylene, natural rubber and NBR. Zinc di-n-butyldithiocarbamate (ZDBC), diethyldithiocarbamate (ZDEC) used as vulcanization accelerators, di(2-ethylhexyl)phthalate (DEHP) used as a plasticizer and many unknown compounds that migrated from NBR gloves into n-heptane were detected by GC/MS. In this paper, six unknown compounds were obtained from one kind of NBR glove by n-hexane extraction and each was isolated by silica gel chromatography. From the results of NMR and mass spectral analysis of the six unknown compounds, their structures are proposed as 1,4-dione-2,5-bis(1,1-dimethylpropyl)cyclohexadiene (1), 2-(1,1-dimethylethyl)-4-(1,1,3,3-tetra methylbutyl)phenol (2), 2,6-bis(1,1-dimethylethyl)-4-(1,1,3,3-tetramethylbutyl)phenol (3), 2,4-bis(1,1,3,3-tetramethylbutyl)phenol (4), 2-(1,1-dimethylethyl)4,6-bis(1,1,3,3-tetramethylbutyl)phenol (5) and 2,4,6-tris(1,1,3,3-tetramethylbutyl)phenol (6). Compound 1 was observed in five of the seven kinds of NBR gloves, and compounds 2-4 and 6, which are not listed in Chemical Abstract (CA), were present in four kinds of gloves.

Isoxazole derivatives as new nitric oxide elicitors in plants

Directory of Open Access Journals (Sweden)

Anca Oancea

2017-04-01

Full Text Available Several 3,5-disubstituted isoxazoles were obtained in good yields by regiospecific 1,3-dipolar cycloaddition reactions between aromatic nitrile oxides, generated in situ from the corresponding hydroxyimidoyl chlorides, with non-symmetrical activated alkynes in the presence of catalytic amounts of copper(I iodide. Effects of 3,5-disubstituted isoxazoles on nitric oxide and reactive oxygen species generation in Arabidopsis tissues was studied using specific diaminofluoresceine dyes as fluorescence indicators.

Synthesis of 3,4-Dibenzyltetrahydrofuran Lignans (9,9′-Epoxylignanes

Directory of Open Access Journals (Sweden)

Kristiina Wähälä

2013-10-01

Full Text Available Different strategies for the racemic or enantiospecific total syntheses of plant and mammalian 3,4-dibenzyltetrahydrofuran lignans are reviewed and compared. The multi-step approaches have various key step strategies: Diels–Alder reactions, Stobbe condensations, Michael additions, alkylations, nitrile oxide cycloadditions, radical cyclisations, dianion and oxidative couplings.

The use of styrene-butadiene rubber waste as a potential filler in nitrile rubber: order of addition and size of waste particles

Directory of Open Access Journals (Sweden)

D. A. Baeta

2009-03-01

Full Text Available Styrene-butadiene rubber (SBR has large applications in the shoe industry, especially as expanded sheets used to produce insoles and inner soles. According to TG analysis, the rubber content in SBR residues (SBR-r was found to be around 26-wt%. Based on that data, a cost-effective technique for the reuse of SBR-r in Nitrile rubber (NBR was developed. Later, the effect of SBR-r on the cure behavior, mechanical performance, swelling, and crosslink density of reused rubber was investigated, with more emphasis placed on the effect of both particle size and loading of waste filler. Cure characteristics such as optimum cure time and scorch time were then reduced by the increasing amount of SBR-r filler. Owing to the reinforced nature of the largest particle size SBR-r, the best results for the mechanical properties of NBR were those in which SBR-r was added at the end of the cure process. The study has thus shown that SBR residue (SBR-r can be used as an economical alternative filler in NBR.

The FH mutation database: an online database of fumarate hydratase mutations involved in the MCUL (HLRCC tumor syndrome and congenital fumarase deficiency

Directory of Open Access Journals (Sweden)

Tomlinson Ian PM

2008-03-01

Full Text Available Abstract Background Fumarate hydratase (HGNC approved gene symbol – FH, also known as fumarase, is an enzyme of the tricarboxylic acid (TCA cycle, involved in fundamental cellular energy production. First described by Zinn et al in 1986, deficiency of FH results in early onset, severe encephalopathy. In 2002, the Multiple Leiomyoma Consortium identified heterozygous germline mutations of FH in patients with multiple cutaneous and uterine leiomyomas, (MCUL: OMIM 150800. In some families renal cell cancer also forms a component of the complex and as such has been described as hereditary leiomyomatosis and renal cell cancer (HLRCC: OMIM 605839. The identification of FH as a tumor suppressor was an unexpected finding and following the identification of subunits of succinate dehydrogenase in 2000 and 2001, was only the second description of the involvement of an enzyme of intermediary metabolism in tumorigenesis. Description The FH mutation database is a part of the TCA cycle gene mutation database (formerly the succinate dehydrogenase gene mutation database and is based on the Leiden Open (source Variation Database (LOVD system. The variants included in the database were derived from the published literature and annotated to conform to current mutation nomenclature. The FH database applies HGVS nomenclature guidelines, and will assist researchers in applying these guidelines when directly submitting new sequence variants online. Since the first molecular characterization of an FH mutation by Bourgeron et al in 1994, a series of reports of both FH deficiency patients and patients with MCUL/HLRRC have described 107 variants, of which 93 are thought to be pathogenic. The most common type of mutation is missense (57%, followed by frameshifts & nonsense (27%, and diverse deletions, insertions and duplications. Here we introduce an online database detailing all reported FH sequence variants. Conclusion The FH mutation database strives to systematically

bis-Nitrile and bis-Dialkylcyanamide Platinum(II) Complexes as Efficient Catalysts for Hydrosilylation Cross-Linking of Siloxane Polymers.

Science.gov (United States)

Islamova, Regina M; Dobrynin, Mikhail V; Ivanov, Daniil M; Vlasov, Andrey V; Kaganova, Elena V; Grigoryan, Galina V; Kukushkin, Vadim Yu

2016-03-05

cis- and trans-Isomers of the platinum(II) nitrile complexes [PtCl2(NCR)2] (R = NMe2, N(C₅H10), Ph, CH2Ph) were examined as catalysts for hydrosilylation cross-linking of vinyl-terminated polydimethylsiloxane and trimethylsilyl-terminated poly(dimethylsiloxane-co-ethylhydrosiloxane) producing high quality silicone rubbers. Among the tested platinum species the cis-complexes are much more active catalysts than their trans-congeners and for all studied platinum complexes cis-[PtCl2(NCCH2Ph)2] exhibits the best catalytic activity (room temperature, c = 1.0 × 10(-4) mol/L, τpot-life 60 min, τcuring 6 h). Although cis-[PtCl₂(NCCH2Ph)2] is less active than the widely used Karstedt's catalyst, its application for the cross-linking can be performed not only at room temperature (c = 1.0 × 10(-4) mol/L), but also, more efficiently, at 80 °C (c = 1.0 × 10(-4)-1.0 × 10(-5) mol/L) and it prevents adherence of the formed silicone rubbers to equipment. The usage of the cis- and trans-[PtCl2(NCR)2] complexes as the hydrosilylation catalysts do not require any inhibitors and, moreover, the complexes and their mixtures with vinyl- and trimethylsilyl terminated polysiloxanes are shelf-stable in air. Tested catalysts do not form colloid platinum particles after the cross-linking.

Blends of nitrile butadiene rubber/poly (vinyl chloride: The use of maleated anhydride castor oil based plasticizer

Directory of Open Access Journals (Sweden)

Indiah Ratna Dewi

2016-06-01

Full Text Available Recently, much attention has been focused on research to replace petroleum-based plasticizers, with biodegradable materials, such as biopolymer which offers competitive mechanical properties. In this study, castor oil was modified with maleic anhydride (MAH to produce bioplasticizer named maleated anhydride castor oil (MACO, and used in nitrile butadiene rubber (NBR/poly vinyl chloride (PVC blend. The effect of MACO on its cure characteristics and mechanical properties of NBR/PVC blend has been determined. The reactions were carried out at different castor oil (CO/xylene ratios, i.e. 1:0 and 1:1 by weight, and fixed CO/MAH ratio, 1:3 by mole. DOP, CO, and MACO were added into each NBR/PVC blend according to the formula. It was found that the viscosity and safe process level of NBR/PVC blend is similar from all plasticizer, however, MACO (1:0 showed the highest cure rate index (CRI. MACO-based plasticizer gave a higher value of the mechanical properties of the NBR/PVC blend as compared to DOP based plasticizer. MACO (1:1 based plasticizer showed a rather significance performance compared to another type of plasticizers both before and after aging. The value of hardness, elongation at break, tensile strength, and tear strength were 96 Shore A, 155.91 %, 19.15 MPa, and 74.47 MPa, respectively. From this result, NBR/PVC blends based on MACO plasticizer can potentially replace the DOP, and therefore, making the rubber blends eco-friendly.

Effect of magnetic and thermal properties of iron oxide nanoparticles (IONs) in nitrile butadiene rubber (NBR) latex

Science.gov (United States)

Ong, Hun Tiar; Julkapli, Nurhidayatullaili Muhd; Hamid, Sharifah Bee Abd; Boondamnoen, O.; Tai, Mun Foong

2015-12-01

Nitrile butadiene rubber (NBR) gloves are one of the most important personal protective equipments but they are possible to tear off and contaminate food or pharmaceutical and healthcare products during manufacturing and packaging process. High tendency of torn glove remaining in food or products due to white or light flesh-coloured glove is not easy to be detected by naked eyes. In this paper, iron oxide nanoparticles (IONs) selected as additive for NBR to improve its detectability by mean of magnetic properties. IONs synthesized via precipitation method and compounded with NBR latex before casting on petri dish. The properties of IONs were investigated by X-ray Diffractometry (XRD), Transmission Electron Microscope (TEM), Raman Spectroscopy and Vibrating Sample Magnetometer (VSM). Meanwhile NBR/IONs composites were studied by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Vibrating Sample Magnetometer (VSM). It observed that, synthesized IONs shows of 25.28 nm crystallite with 25.86 nm semipherical (changed as) shape. Meanwhile, Magnetite and maghemite phase are found in range of 670 cm-1 and 700 cm-1 respectively, which it contributes magnetization saturation of 73.96 emu/g at 10,000 G by VSM. Thermal stability and magnetic properties were increased with incorporating IONs into NBR latex up to 20 phr. NBR/IONs 5 phr has the optimum thermal stability, lowest glass transition temperature (-14.83 °C) and acceptable range of magnetization saturation (3.83 emu/g at 10,000 G) to form NBR gloves with magnetic detectability.

Estudo da influência de tratamentos químicos da fibra de sisal nas propriedades de compósitos com borracha nitrílica Study of the influence from chemical treatments of sisal fibers on the properties of composites with nitrile rubber

Directory of Open Access Journals (Sweden)

Marco A. Iozzi

2010-01-01

Full Text Available A influência de diferentes tratamentos das fibras de sisal nas propriedades dos compósitos de borracha nitrílica/fibras de sisal, e borracha nitrílica/carbonato de cálcio/fibras de sisal foi investigada. Os compósitos, com fibras curtas aleatoriamente distribuídas, foram processados em moinho de dois rolos e caracterizados através de ensaios mecânicos de resistência à tração, microscopia eletrônica de varredura (MEV, análise por termogravimetria (TG e calorimetria exploratória diferencial (DSC. O tratamento de mercerização das fibras levou a uma maior adesão na interface fibra/matriz. O uso combinado de 67 pcr de carbonato com 33 pcr de fibras de sisal mercerizadas produziu um compósito com aumento significativo no módulo de elasticidade e sem perda da resistência à tração de ruptura. Os resultados da análise térmica mostraram que os compósitos são termicamente estáveis até cerca de 300 °C. Os materiais obtidos possuem uma boa relação custo/benefício tornando promissora sua utilização.In this work, composites were produced with nitrile rubber and sisal fibers, and nitrile rubber with calcium carbonate and sisal fibers. The composites were processed on a two-roll mixing mill and their properties were investigated with regard to the influence of chemical treatments of the fibers. The composites, with short fibers randomly distributed, were characterized by mechanical analysis, scanning electron microscopy (SEM, thermogravimetric analysis (TGA and differential scanning calorimetry (DSC. Mercerization treatment of the fibers promoted increasing the adhesion between the fiber and the rubber matrix. The composites of nitrile rubber with 67 pcr of calcium carbonate and 33 pcr of mercerized sisal fibers showed the best mechanical properties. Thermal analysis demonstrated that the composites are thermally stable up to 300 °C. The materials developed have a good cost/benefit relationship making their utilization

Mapping Vinyl Cyanide and Other Nitriles in Titan’s Atmosphere Using ALMA

Science.gov (United States)

Lai, J. C.-Y.; Cordiner, M. A.; Nixon, C. A.; Achterberg, R. K.; Molter, E. M.; Teanby, N. A.; Palmer, M. Y.; Charnley, S. B.; Lindberg, J. E.; Kisiel, Z.; Mumma, M. J.; Irwin, P. G. J.

2017-11-01

Vinyl cyanide (C2H3CN) is theorized to form in Titan’s atmosphere via high-altitude photochemistry and is of interest regarding the astrobiology of cold planetary surfaces due to its predicted ability to form cell membrane-like structures (azotosomes) in liquid methane. In this work, we follow up on the initial spectroscopic detection of C2H3CN on Titan by Palmer et al. with the detection of three new C2H3CN rotational emission lines at submillimeter frequencies. These new, high-resolution detections have allowed for the first spatial distribution mapping of C2H3CN on Titan. We present simultaneous observations of C2H5CN, HC3N, and CH3CN emission, and obtain the first (tentative) detection of C3H8 (propane) at radio wavelengths. We present disk-averaged vertical abundance profiles, two-dimensional spatial maps, and latitudinal flux profiles for the observed nitriles. Similarly to HC3N and C2H5CN, which are theorized to be short-lived in Titan’s atmosphere, C2H3CN is most abundant over the southern (winter) pole, whereas the longer-lived CH3CN is more concentrated in the north. This abundance pattern is consistent with the combined effects of high-altitude photochemical production, poleward advection, and the subsequent reversal of Titan’s atmospheric circulation system following the recent transition from northern to southern winter. We confirm that C2H3CN and C2H5CN are most abundant at altitudes above 200 km. Using a 300 km step model, the average abundance of C2H3CN is found to be 3.03 ± 0.29 ppb, with a C2H5CN/C2H3CN abundance ratio of 2.43 ± 0.26. Our HC3N and CH3CN spectra can be accurately modeled using abundance gradients above the tropopause, with fractional scale-heights of 2.05 ± 0.16 and 1.63 ± 0.02, respectively.

Isolation and characterization of Rhodococcus ruber CGMCC3090 ...

African Journals Online (AJOL)

A bacterial strain was isolated from soil samples that had been polluted by nitrile compounds. This strain converts acrylonitrile to acrylamide with high activity. The nitrile hydrolysis activity was tested using eight substrates, including aliphatic, aromatic and heterocyclic (di)nitriles. All of the nitrile compounds were hydrolyzed ...

Whole glove permeation of cyclohexanol through disposable nitrile gloves on a dextrous robot hand and comparison with the modified closed-loop ASTM F739 method 1. No fist clenching.

Science.gov (United States)

Mathews, Airek R; Que Hee, Shane S

2017-04-01

The aim was to develop a whole glove permeation method for cyclohexanol to generate permeation parameter data for a non-moving dextrous robot hand (normalized breakthrough time t b , standardized breakthrough time t s , steady state permeation rate P s , and diffusion coefficient D). Four types of disposable powderless, unsupported, and unlined nitrile gloves from the same producer were investigated: Safeskin Blue and Kimtech Science Blue, Purple, and Sterling. The whole glove method developed involved a peristaltic pump for water circulation through chemically resistant Viton tubing to continually wash the inner surface of the test glove via holes in the tubing, a dextrous robot hand operated by a microprocessor, a chemically protective nitrile glove to protect the robot hand, an incubator to maintain 35°C temperature, and a hot plate to maintain 35°C at the sampling point of the circulating water. Aliquots of 1.0 mL were sampled at regular time intervals for the first 60 min followed by removal of 0.5 mL aliquots every hour to 8 hr. Quantification was by the internal standard method after gas chromatography-selective ion electron impact mass spectrometry using a non-polar capillary column. The individual glove values of t b and t s differed for the ASTM closed loop method except for Safeskin Blue, but did not for the whole glove method. Most of the kinetic parameters agreed within an order of magnitude for the two techniques. The order of most protective to least protective glove was Blue and Safeskin, then Purple followed by Sterling for the whole gloves. The analogous order for the modified F739 ASTM closed loop method was: Safeskin, Blue, Purple, and Sterling, almost the same as for the whole glove. The Sterling glove was "not recommended" from the modified ASTM data, and was "poor" from the whole glove data.

Cure and mechanical properties of carboxylated nitrile rubber (XNBR) vulcanized by alkaline earth metal compounds

Science.gov (United States)

Tulyapitak, Tulyapong

Compounds of carboxylated nitrile rubber (XNBR) with alkaline metal oxides and hydroxide were prepared, and their cure and mechanical properties were investigated. Magnesium oxide (MgO) with different specific surface areas (45, 65, and 140 m2/g) was used. Increased specific surface area and concentration of MgO resulted in higher cure rate. Optimum stiffness, tensile strength, and ultimate strain required an equimolar amount of acidity and MgO. The effect of specific surface area on tensile properties was not significant. Crosslink density of XNBR-MgO vulcanizates increased with increased amounts of MgO. ATR-IR spectroscopy showed that neutralization occurs in two steps: (1) During mixing and storage, MgO reacts with carboxyl groups (RCOOH) to give RCOOMgOH. (2) Upon curing, these react bimolecularly to form RCOOMgOOCR and Mg(OH)2. Dynamic mechanical thermal analysis revealed an ionic transition at higher temperature, in addition to the glass transition. The ionic transition shifts to higher temperature with increasing MgO concentration. Like MgO-XNBR systems, cure rates of XNBR-calcium hydroxide (Ca(OH)2) and XNBR-barium oxide (BaO) compounds increased with increased content of curing agents. Curing by these two agents resulted in ionic crosslinks. To ensure optimum tensile properties, equimolar amounts of carboxyl groups and curing agents were required. Dynamic mechanical analysis revealed the ionic transition in these two systems. It shifted to higher temperature with increased amounts of curing agents. In contrast to MgO, Ca(OH)2, and BaO, calcium oxide (CaO) gave results similar to those for thermally cured samples. No ionic transition was observed in XNBR-CaO systems. Tensile strength of XNBR depended on the strength of ionic crosslinks, which was dependent on the size of the alkaline metal ions.

Cyclohexanecarbonitriles: Assigning Configurations at Quaternary Centers From 13C NMR CN Chemical Shifts.1

Science.gov (United States)

Wei, Guoqing

2009-01-01

13C NMR chemical shifts of the nitrile carbon in cyclohexanecarbonitriles directly correlate with the configuration of the quaternary, nitrile-bearing stereocenter. Comparing 13C NMR chemical shifts for over 200 cyclohexanecarbonitriles reveals that equatorially oriented nitriles resonate 3.3 ppm downfield, on average, from their axial counterparts. Pairs of axial/equatorial diastereomers varying only at the nitrile-bearing carbon consistently exhibit downfield shifts of δ 0.4–7.2 for the equatorial nitrile carbon, even in angularly substituted decalins and hydrindanes. PMID:19348434

The improvement of the mechanical properties of PMMA denture base by Al2O3 particles with nitrile rubber

Science.gov (United States)

Alhareb, Ahmed Omran; Akil, Hazizan Md; Ahmad, Zainal Arifin

2017-07-01

Poly methyl methacrylate (PMMA) is mostly used for fabrication of denture base by heat-curing technique. Therefore, the purpose of this study is to investigate the effect of Al2O3 filler as toughening particles together with nitrile butadiene rubber (NBR) particles as impact modifier were used to reinforce PMMA denture base materials on the impact strength (IS) and fracture toughness (KIC). PMMA powder was mixed with liquid methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent. The powder components are PMMA, benzoyl peroxide, NBR (5, 7.5 and 10 wt%), and Al2O3 filler (5 wt%) treated by silane. The liquid components are 90% of methyl methacrylate and 10 % ethylene glycol dimethacryate. FTIR analyses confirmed that the Al2O3 filler was successfully treated with silane as coupling agent. The morphology of fracture surfaces was characterized using field emission scanning electron microscopy (FESEM). The results shown that IS and KIC improved significantly when using treated the Al2O3 filler. IS has increased to 56% (8.26 KJ/m2) and 73% (2.77 MPa.m1/2) for KIC when treated Al2O3 filler compared to unreinforced PMMA matrix. Statistical analyses of data results were significantly improved (PNBR with treated Al2O3 filler compared to other the compositions.

Nanocomposites of nitrile (NBR) rubber with multi-walled carbon nanotubes

Science.gov (United States)

Warasitthinon, Nuthathai

Nanotechnology offers the promise of creating new materials with enhanced performance. There are different kinds of fillers used in rubber nanocomposites, such as carbon black, silica, carbon fibers, and organoclays. Carbon nanotube reinforced elastomers have potential for improved rubber properties in aggressive environments. The first chapter is an introduction to the literature. The second chapter investigated the incorporation of multi-walled carbon nanotubes (MWCNTs) into rubber matrix for potential use in high temperature applications. The vulcanization kinetics of acrylonitrile butadiene rubber (NBR) reinforced with multi-walled carbon nanotubes was investigated. The vulcanized NBR rubber with different loading percentages of MWCNTs was also compared to NBR reinforced with carbon black N330. The optimum curing time at 170°C (T90) was found to decrease with increasing content of MWCNTs. Increased filler loading of both carbon black and MWCNTs gave higher modulus and strength. The MWCNTs filled materials gave better retention of modulus and tensile strength at high temperatures, but lower strength as compared to the carbon black filled samples. In the third chapter, carbon black (CB, 50phr) content in nitrile rubber (NBR) nanocomposites was partially replaced by multi-walled carbon nanotubes (MWCNTs). NBR/CB/CNTs nanocomposites with varying ratio of CB/CNTs (50/0 phr to 40/10 phr) were formulated via the melt-mixing method using an internal mixer. The reinforcing effect of single filler (CB) and mixture of fillers (CB and CNTs) on the properties of NBR nanocomposites was investigated. The cure kinetics and bound rubber content were analyzed using rheometry and solvent swelling method. In addition, mechanical behavior at both room temperature and high temperature (350°F/ 121°C) were examined. The scorch time and curing time values showed that there was no significant effect on the curing behavior of NBR nanocomposites after the partial replacement of CB with

Specific combination of compound heterozygous mutations in 17β-hydroxysteroid dehydrogenase type 4 (HSD17B4 defines a new subtype of D-bifunctional protein deficiency

Directory of Open Access Journals (Sweden)

McMillan Hugh J

2012-11-01

Full Text Available Abstract Background D-bifunctional protein (DBP deficiency is typically apparent within the first month of life with most infants demonstrating hypotonia, psychomotor delay and seizures. Few children survive beyond two years of age. Among patients with prolonged survival all demonstrate severe gross motor delay, absent language development, and severe hearing and visual impairment. DBP contains three catalytically active domains; an N-terminal dehydrogenase, a central hydratase and a C-terminal sterol carrier protein-2-like domain. Three subtypes of the disease are identified based upon the domain affected; DBP type I results from a combined deficiency of dehydrogenase and hydratase activity; DBP type II from isolated hydratase deficiency and DBP type III from isolated dehydrogenase deficiency. Here we report two brothers (16½ and 14 years old with DBP deficiency characterized by normal early childhood followed by sensorineural hearing loss, progressive cerebellar and sensory ataxia and subclinical retinitis pigmentosa. Methods and results Biochemical analysis revealed normal levels of plasma VLCFA, phytanic acid and pristanic acid, and normal bile acids in urine; based on these results no diagnosis was made. Exome analysis was performed using the Agilent SureSelect 50Mb All Exon Kit and the Illumina HiSeq 2000 next-generation-sequencing (NGS platform. Compound heterozygous mutations were identified by exome sequencing and confirmed by Sanger sequencing within the dehydrogenase domain (c.101C>T; p.Ala34Val and hydratase domain (c.1547T>C; p.Ile516Thr of the 17β-hydroxysteroid dehydrogenase type 4 gene (HSD17B4. These mutations have been previously reported in patients with severe-forms of DBP deficiency, however each mutation was reported in combination with another mutation affecting the same domain. Subsequent studies in fibroblasts revealed normal VLCFA levels, normal C26:0 but reduced pristanic acid beta-oxidation activity. Both DBP

Investigation of Ageing Behaviour of Nitrile-Butadiene Rubber with Added Graphene in an Accelerated Thermal Ageing Environment

Directory of Open Access Journals (Sweden)

Fei-Zhou Li

2018-01-01

Full Text Available In this paper, the thermal ageing of nitrile-butadiene rubber (NBR reinforced with different graphene (GE concentrations has been investigated. NBR and NBR-GE composites were exposed to an accelerated thermal ageing environment produced by an air-circulating oven for seven days. The mechanical properties, chemical changes, and thermal stability of ageing samples and neat samples were evaluated. The results showed that the surface damage of NBR was severe and inhomogeneous, and the degree of ageing was most serious on the edge region of the voids, but NBR-GE composites were changed slightly before and after ageing. The tensile strength increased with the increase of GE concentration, up to a maximum value, and decreased with further increases in GE concentration. The GE embedded crosslinked network limited the segment movement of chains in the stretch direction and played a role in the composites properties, and the GE sheets (contained the functional groups of −OH, −C=O and C=C after ageing. This behaviour may indicate greater interface adhesion between the GE and NBR. In addition, results obtained by thermogravimetric analysis (TGA indicated that the thermal stability of NBR significantly changed with accelerated thermal ageing environment, but with addition of a certain amount of GE to NBR, the thermal stability of NBR could be improved. The NBR/GE composites exhibited good comprehensive performance with a mass fraction of GE of 10 %. Before and after the thermal ageing, the failure mechanism of NBR-GE composites appeared intergranular and ductile fracture, respectively.

Probing α-relaxation with nuclear magnetic resonance echo decay and relaxation: a study on nitrile butadiene rubber.

Science.gov (United States)

Sturniolo, Simone; Pieruccini, Marco; Corti, Maurizio; Rigamonti, Attilio

2013-01-01

One dimensional (1)H NMR measurements have been performed to probe slow molecular motions in nitrile butadiene rubber (NBR) around its calorimetric glass transition temperature Tg. The purpose is to show how software aided data analysis can extract meaningful dynamical data from these measurements. Spin-lattice relaxation time, free induction decay (FID) and magic sandwich echo (MSE) measurements have been carried out at different values of the static field, as a function of temperature. It has been evidenced how the efficiency of the MSE signal in reconstructing the original FID exhibits a sudden minimum at a given temperature, with a slight dependence from the measuring frequency. Computer simulations performed with the software SPINEVOLUTION have shown that the minimum in the efficiency reconstruction of the MSE signal corresponds to the average motional frequency taking a value around the inter-proton coupling. The FID signals have been fitted with a truncated form of a newly derived exact correlation function for the transverse magnetization of a dipolar interacting spin pair, which allows one to avoid the restriction of the stationary and Gaussian approximations. A direct estimate of the conformational dynamics on approaching the Tg is obtained, and the results are in agreement with the analysis performed via the MSE reconstruction efficiency. The occurrence of a wide distribution of correlation frequencies for the chains motion, with a Vogel-Fulcher type temperature dependence, is addressed. A route for a fruitful study of the dynamics accompanying the glass transition by a variety of NMR measurements is thus proposed. Copyright © 2013 Elsevier Inc. All rights reserved.

On the interactions of nitriles and fluoro-substituted pyridines with silicon tetrafluoride: Computations and thin film IR spectroscopy

Science.gov (United States)

Hora, Nicholas J.; Wahl, Benjamin M.; Soares, Camilla; Lara, Skylee A.; Lanska, John R.; Phillips, James A.

2018-04-01

The nature of the interactions between silicon tetrafluoride and series of nitrogen bases, including nitriles (RCN, with R > CH3), pyridine, and various fluoro-substituted pyridines, has been investigated via quantum-chemical computations, low-temperature IR spectroscopy, and bulk reactivity experiments. Using (primarily) M06 with the 6-311+G(2df,2pd) basis set, we obtained equilibrium structures, binding energies, harmonic frequencies, and N-Si potentials in the gas-phase and in bulk dielectric media for an extensive series of 1:1 molecular complexes, including: C6H5CH2CN-SiF4, CH3CH2CN-SiF4, (CH3)3CCN-SiF4, C5H5N-SiF4, 4-FC5H4N-SiF4, 3,5-C5F2H3N-SiF4, 2,6-C5F2H3N-SiF4 and 3,4,5-C5F3H2N-SiF4. In addition, for the analogous 2:1 complexes of pyridine and 3,5-difluororpyridine, we obtained equilibrium structures, binding energies, and harmonic frequencies. The N-Si distances in the 1:1 nitrile complexes are fairly long, ranging from 2.84 Å to 2.88 Å, and the binding energies range from 4.0 to 4.2 kcal/mol (16.7-17.6 kJ/mol). Also, computations predict extremely anharmonic N-Si potentials, for which the inner portions of the curve are preferentially stabilized in dielectric media, which predict an enhancement of these interactions in condensed-phases. However, we see no evidence of bulk reactivity between C6H5CH2CN, CH3CH2CN, or (CH3)3CCN and SiF4, nor any significant interaction between (CH3)3CCN and SiF4 in low temperature IR spectra of solid, (CH3)3CCN/SiF4 thin films. Conversely, the interactions in four of the five 1:1, pyridine-SiF4 complexes are generally stronger; binding energies range from 5.7 to 9.6 kcal/mol (23.8-40.2 kJ/mol), and correspondingly the N-Si distances are relatively short (2.12-2.25 Å). The exception is 2,6-C5F2H3N-SiF4, for which the binding energy is only 3.6 kcal/mol (15.1 kJ/mol), and the N-Si distance is quite long (3.12 Å). In addition, both pyridine and 3,5-difluororpyridine were found to form stable reaction products with SiF4

Mapping Vinyl Cyanide and Other Nitriles in Titan’s Atmosphere Using ALMA

Energy Technology Data Exchange (ETDEWEB)

Lai, J. C.-Y.; Cordiner, M. A.; Nixon, C. A.; Achterberg, R. K.; Molter, E. M.; Palmer, M. Y.; Charnley, S. B.; Lindberg, J. E.; Mumma, M. J. [NASA Goddard Space Flight Center, 8800 Greenbelt Road, Greenbelt, MD 20771 (United States); Teanby, N. A. [School of Earth Sciences, University of Bristol, Wills Memorial Building, Queen’s Road, Bristol, BS8 1RJ (United Kingdom); Kisiel, Z. [Institute of Physics, Polish Academy of Sciences, Al. Lotnikøw 32/46, 02-668 Warszawa (Poland); Irwin, P. G. J., E-mail: martin.cordiner@nasa.gov [Atmospheric, Oceanic and Planetary Physics, Clarendon Laboratory, University of Oxford, Parks Road, Oxford, OX1 3PU (United Kingdom)

2017-11-01

Vinyl cyanide (C{sub 2}H{sub 3}CN) is theorized to form in Titan’s atmosphere via high-altitude photochemistry and is of interest regarding the astrobiology of cold planetary surfaces due to its predicted ability to form cell membrane-like structures (azotosomes) in liquid methane. In this work, we follow up on the initial spectroscopic detection of C{sub 2}H{sub 3}CN on Titan by Palmer et al. with the detection of three new C{sub 2}H{sub 3}CN rotational emission lines at submillimeter frequencies. These new, high-resolution detections have allowed for the first spatial distribution mapping of C{sub 2}H{sub 3}CN on Titan. We present simultaneous observations of C{sub 2}H{sub 5}CN, HC{sub 3}N, and CH{sub 3}CN emission, and obtain the first (tentative) detection of C{sub 3}H{sub 8} (propane) at radio wavelengths. We present disk-averaged vertical abundance profiles, two-dimensional spatial maps, and latitudinal flux profiles for the observed nitriles. Similarly to HC{sub 3}N and C{sub 2}H{sub 5}CN, which are theorized to be short-lived in Titan’s atmosphere, C{sub 2}H{sub 3}CN is most abundant over the southern (winter) pole, whereas the longer-lived CH{sub 3}CN is more concentrated in the north. This abundance pattern is consistent with the combined effects of high-altitude photochemical production, poleward advection, and the subsequent reversal of Titan’s atmospheric circulation system following the recent transition from northern to southern winter. We confirm that C{sub 2}H{sub 3}CN and C{sub 2}H{sub 5}CN are most abundant at altitudes above 200 km. Using a 300 km step model, the average abundance of C{sub 2}H{sub 3}CN is found to be 3.03 ± 0.29 ppb, with a C{sub 2}H{sub 5}CN/C{sub 2}H{sub 3}CN abundance ratio of 2.43 ± 0.26. Our HC{sub 3}N and CH{sub 3}CN spectra can be accurately modeled using abundance gradients above the tropopause, with fractional scale-heights of 2.05 ± 0.16 and 1.63 ± 0.02, respectively.

Adhesion of nitrile rubber (NBR) to polyethylene terephthalate (PET) fabric. Part 1: PET surface modification by methylenediphenyl di-isocyanate (MDI)

Science.gov (United States)

Razavizadeh, Mahmoud; Jamshidi, Masoud

2016-01-01

Fiber to rubber adhesion is an important subject in rubber composite industry. It is well known that surface physical, mechanical and chemical treatments are effective methods to improve interfacial bonding. Ultra violet (UV) light irradiation is an efficient method which is used to increase interfacial interactions. In this research UV assisted chemical modification of PET fabric was used to increase its bonding to nitrile rubber (NBR). NBR is perfect selection to produce fuel and oil resistant rubber parts but it has weak bonding to fabrics. For this purpose at first, the PET fabric was carboxylated under UV irradiation and then methylenediphenyl diisocyanate (MDI) was reacted and grafted to carboxylated PET. T-peel test was used to evaluate PET fabric to NBR bonding strength. Attenuated total reflectance-Fourier transform infrared spectroscopy (FTIR-AT) was used to assess surface modifications of the PET fabrics. The chemical composition of the PET surfaces before and after carboxylation and MDI grafting was investigated by X-ray photoelectron spectroscopy (XPS). It was found that at vulcanizing temperature of 150 °C, carboxylation in contrary to MDI grafting, improved considerably PET to NBR adhesion. Finally effect of curing temperature on PET to NBR bonding strength was determined. It was found that increasing vulcanizing temperature to 170 °C caused considerable improvement (about 134%) in bonding strength.

Composites Based on Core-Shell Structured HBCuPc@CNTs-Fe3O4 and Polyarylene Ether Nitriles with Excellent Dielectric and Mechanical Properties

Science.gov (United States)

Pu, Zejun; Zhong, Jiachun; Liu, Xiaobo

2017-10-01

Core-shell structured magnetic carbon nanotubes (CNTs-Fe3O4) coated with hyperbranched copper phthalocyanine (HBCuPc) (HBCuPc@CNTs-Fe3O4) hybrids were prepared by the solvent-thermal method. The results indicated that the HBCuPc molecules were decorated on the surface of CNTs-Fe3O4 through coordination behavior of phthalocyanines, and the CNTs-Fe3O4 core was completely coaxial wrapped by a functional intermediate HBCuPc shell. Then, polymer-based composites with a relatively high dielectric constant and low dielectric loss were fabricated by using core-shell structured HBCuPc@CNTs-Fe3O4 hybrids as fillers and polyarylene ether nitriles (PEN) as the polymer matrix. The cross-sectional scanning electron microscopy (SEM) images of composites showed that there is almost no agglomeration and internal delamination. In addition, the rheological analysis reveals that the core-shell structured HBCuPc@CNTs-Fe3O4 hybrids present better dispersion and stronger interface adhesion with the PEN matrix than CNTs-Fe3O4, thus resulting in significant improvement of the mechanical, thermal and dielectric properties of polymer-based composites.

Optimizing isothiocyanate formation during enzymatic glucosinolate breakdown by adjusting pH value, temperature and dilution in Brassica vegetables and Arabidopsis thaliana

Science.gov (United States)

Hanschen, Franziska S.; Klopsch, Rebecca; Oliviero, Teresa; Schreiner, Monika; Verkerk, Ruud; Dekker, Matthijs

2017-01-01

Consumption of glucosinolate-rich Brassicales vegetables is associated with a decreased risk of cancer with enzymatic hydrolysis of glucosinolates playing a key role. However, formation of health-promoting isothiocyanates is inhibited by the epithiospecifier protein in favour of nitriles and epithionitriles. Domestic processing conditions, such as changes in pH value, temperature or dilution, might also affect isothiocyanate formation. Therefore, the influences of these three factors were evaluated in accessions of Brassica rapa, Brassica oleracea, and Arabidopsis thaliana. Mathematical modelling was performed to determine optimal isothiocyanate formation conditions and to obtain knowledge on the kinetics of the reactions. At 22 °C and endogenous plant pH, nearly all investigated plants formed nitriles and epithionitriles instead of health-promoting isothiocyanates. Response surface models, however, clearly demonstrated that upon change in pH to domestic acidic (pH 4) or basic pH values (pH 8), isothiocyanate formation considerably increases. While temperature also affects this process, the pH value has the greatest impact. Further, a kinetic model showed that isothiocyanate formation strongly increases due to dilution. Finally, the results show that isothiocyanate intake can be strongly increased by optimizing the conditions of preparation of Brassicales vegetables.

Reactions of the dirhenium(II) complexes Re2X4(dppm)2 (X = Cl, Br; dppm = Ph2PCH2PPh2) with isocyanides. 5. Mixed carbonyl-isocyanide and carbonyl-isocyanide-nitrile complexes of stoichiometry (Re2Cl3(dppm)2(CO)(CNR)(L))PF6 (R = t-Bu, xyl (Xylyl); L = t-BuNC, xylNC, MeCN, EtCN). Structural characterization of the cation (Cl2(CO)Re(μ-dppm)2ReCl (CN-t-Bu)2)+

International Nuclear Information System (INIS)

Fanwick, P.E.; Price, A.C.; Walton, R.A.

1988-01-01

Several dirhenium (II) species that contain mixed sets of carbonyl, isocyanide, and/or nitrile ligands have been prepared from the reactions between Re 2 Cl 4 (dppm) 2 (CO)(CNR) (dppm = Ph 2 PCHPPh 2 ; R = t-Bu, xyl (xylyl)), and the appropriate ligands in the presence of TlPF 6 . The crystal structures of these compounds are reported. The terminally-bound ligand noted in the complexes (Re 2 Cl 3 (dppm) 2 (CO)(CN-t-Bu) 2 )PF 6 and (Re 2 CL 3 (dppm) 2 (CO)(CN-t-Bu)(CNxyl))PF 6 indicates structures that have not been previously reported. Complexes in which there are mixed sets of carbonyl, isocyanide, and nitrile ligands, viz. (Re 2 Cl 3 (dppm) 2 (CO)(CNR)(CNR'))PF 6 are also reported. 20 refs., 1 fig., 5 tabs

Selected Economic Translations on Eastern Europe (164th in the Series)

Science.gov (United States)

1960-04-15

processing—namely, the study groups for polyacryl -nitril fibers and the study groups for polyester fibers, which in serious application of the principles of ...decomposition plants, electrolysis cells for chloride of potassium , dry rotor compressors, revolving calenders for viscose dryers, automatic thrust...ojg CD ^ tZ ft,? . . -; r;-; r »OOOOW U7 Photocopies of this report may be purchased from: PHOTOIXJPLiCATION SERVICE LIBRARY OF CONGRESS

Myeloperoxidase-mediated protein lysine oxidation generates 2-aminoadipic acid and lysine nitrile in vivo.

Science.gov (United States)

Lin, Hongqiao; Levison, Bruce S; Buffa, Jennifer A; Huang, Ying; Fu, Xiaoming; Wang, Zeneng; Gogonea, Valentin; DiDonato, Joseph A; Hazen, Stanley L

2017-03-01

Recent studies reveal 2-aminoadipic acid (2-AAA) is both elevated in subjects at risk for diabetes and mechanistically linked to glucose homeostasis. Prior studies also suggest enrichment of protein-bound 2-AAA as an oxidative post-translational modification of lysyl residues in tissues associated with degenerative diseases of aging. While in vitro studies suggest redox active transition metals or myeloperoxidase (MPO) generated hypochlorous acid (HOCl) may produce protein-bound 2-AAA, the mechanism(s) responsible for generation of 2-AAA during inflammatory diseases are unknown. In initial studies we observed that traditional acid- or base-catalyzed protein hydrolysis methods previously employed to measure tissue 2-AAA can artificially generate protein-bound 2-AAA from an alternative potential lysine oxidative product, lysine nitrile (LysCN). Using a validated protease-based digestion method coupled with stable isotope dilution LC/MS/MS, we now report protein bound 2-AAA and LysCN are both formed by hypochlorous acid (HOCl) and the MPO/H 2 O 2 /Cl - system of leukocytes. At low molar ratio of oxidant to target protein N ε -lysine moiety, 2-AAA is formed via an initial N ε -monochloramine intermediate, which ultimately produces the more stable 2-AAA end-product via sequential generation of transient imine and semialdehyde intermediates. At higher oxidant to target protein N ε -lysine amine ratios, protein-bound LysCN is formed via initial generation of a lysine N ε -dichloramine intermediate. In studies employing MPO knockout mice and an acute inflammation model, we show that both free and protein-bound 2-AAA, and in lower yield, protein-bound LysCN, are formed by MPO in vivo during inflammation. Finally, both 2-AAA and to lesser extent LysCN are shown to be enriched in human aortic atherosclerotic plaque, a tissue known to harbor multiple MPO-catalyzed protein oxidation products. Collectively, these results show that MPO-mediated oxidation of protein lysyl

Tholins: Can They Provide a Substrate, Carbon and Nitrogen for Plant Production?

Science.gov (United States)

Wignarajah, Kanapathipillai; Khare, Bishun; Cruikshank, Dale; McKay, Christopher; Arnold, James O. (Technical Monitor)

1999-01-01

Tholin is a word coined to describe the entire class of complex organic solids produced in laboratory experiments where pre-biotic gaseous chemicals are subject to bombardment by high energy. The atomic composition of Titan tholin produced from 10 percent CH4 and 90 percent N2 in a simulation of Titan atmosphere irradiated by charged particles trapped in the magnetosphere of Saturn gave 67 percent C and 33 percent N. Hydrolysis of Titan tholin with 6N HCl produced a racemic mixture of biological and non-biological amino acids that was confirmed by GC/MS. Other tholins, that revealed the presence of amino acids, were UV tholin produced under possible primitive Earth conditions by irradiation of a mixture of gases (CH4, C2H6, NH3, H2S and liquid H2O) with long-wavelength ultraviolet light, representing the most abundant useful energy source for prebiological organic synthesis; Spark tholin in a crude simulation of Jupiter atmosphere using electrical discharge through a mixture of CH4, NH3, and H2O vapor. Pyrolytic GC/MS of Titan tholin produced more than one hundred organic compounds including saturated and unsaturated aliphatic hydrocarbons, substituted polycyclic aromatics, nitriles, amines, pyrroles, pyrazines, pyridines, pyrimidines, and the purine, adenine. Similar rich pyrolytic products were obtained with UV as well as Spark tholins. A range of two to four ring PAHs (Polycyclic Aromatic Hydrocarbons) in Spark as well as Titan tholins, some with one to four alkylation sites, were identified by two-step laser desorption/multiphoton ionization mass spectrometry and also confirmed by the synchronous fluorescence technique. Previous studies have demonstrated the potential for use of tholins as a source of carbon and energy by microbes. This paper describes studies that evaluate the potential for using different types of tholins as (a) a substrate for growing plants and (b) a source of carbon and nitrogen for plants. The data are interpreted in terms of the

Variability in surface infrared reflectance of thirteen nitrile rubber gloves at key wavelengths for analysis of captan.

Science.gov (United States)

Phalen, R N; Que Hee, Shane S

2007-02-01

The aim of this study was to investigate the surface variability of 13 powder-free, unlined, and unsupported nitrile rubber gloves using attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectrophotometry at key wavelengths for analysis of captan contamination. The within-glove, within-lot, and between-lot variability was measured at 740, 1124, 1252, and 1735 cm(-1), the characteristic captan reflectance minima wavelengths. Three glove brands were assessed after conditioning overnight at relative humidity (RH) values ranging from 2 +/- 1 to 87 +/- 4% and temperatures ranging from -8.6 +/- 0.7 to 59.2 +/- 0.9 degrees C. For all gloves, 1735 cm(-1) provided the lowest background absorbance and greatest potential sensitivity for captan analysis on the outer glove surface: absorbances ranged from 0.0074 +/- 0.0005 (Microflex) to 0.0195 +/- 0.0024 (SafeSkin); average within-glove coefficients of variation (CV) ranged from 2.7% (Best, range 0.9-5.3%) to 10% (SafeSkin, 1.2-17%); within-glove CVs greater than 10% were for one brand (SafeSkin); within-lot CVs ranged from 2.8% (Best N-Dex) to 28% (SafeSkin Blue); and between-lot variation was statistically significant (p < or = 0.05) for all but two SafeSkin lots. The RH had variable effects dependent on wavelength, being minimal at 1735, 1252, and 1124 cm(-1) and highest at 3430 cm(-1) (O-H stretch region). There was no significant effect of temperature conditioning. Substantial within-glove, within-lot, and between-lot variability was observed. Thus, surface analysis using ATR-FT-IR must treat glove brands and lots as different. ATR-FT-IR proved to be a useful real-time analytical tool for measuring glove variability, detecting surface humidity effects, and choosing selective and sensitive wavelengths for analysis of nonvolatile surface contaminants.

Synthesis of 11C-labelled haloalkanonitriles and examples of their use in some alkylation reactions

International Nuclear Information System (INIS)

Hoernfeldt, K.; Antoni, G.; Laangstroem, B.

1992-01-01

The synthesis of the 11 C-labelled bifunctional precursors 4-iodobutyro[ 11 C]nitrile (1), 4-tosyloxybutyro[ 11 C]nitrile (2), 5-iodovalero[ 11 C]nitrile (3), 5-toxyloxyvalero[ 11 C]nitrile (4) and 4-bromopentano[ 11 C]nitrile (5) are presented. The nucleophilic substitution reactions of [ 11 C]cyanide with dibromides, diiodides, ditosylates or mixed iodotosylates producing 1-5 have been carried out in different solvents and the labelled products were obtained in 62-98% radiochemical yields (not isolated), with a total synthesis time of 5 min counted from the end of the hydrogen [ 11 C]cyanide synthesis. The labelled haloalkanonitriles 1 and 3 have also been used in some alkylation reactions with various carbon and oxygen nucleophiles. (au)

Acetylene as fast food: Implications for development of life on anoxic primordial earth and in the outer solar system

Science.gov (United States)

Oremland, R.S.; Voytek, M.A.

2008-01-01

Acetylene occurs, by photolysis of methane, in the atmospheres of jovian planets and Titan. In contrast, acetylene is only a trace component of Earth's current atmosphere. Nonetheless, a methane-rich atmosphere has been hypothesized for early Earth; this atmosphere would also have been rich in acetylene. This poses a paradox, because acetylene is a potent inhibitor of many key anaerobic microbial processes, including methanogenesis, anaerobic methane oxidation, nitrogen fixation, and hydrogen oxidation. Fermentation of acetylene was discovered 25 years ago, and Pelobacter acetylenicus was shown to grow on acetylene by virtue of acetylene hydratase, which results in the formation of acetaldehyde. Acetaldehyde subsequently dismutates to ethanol and acetate (plus some hydrogen). However, acetylene hydratase is specific for acetylene and does not react with any analogous compounds. We hypothesize that microbes with acetylene hydratase played a key role in the evolution of Earth's early biosphere by exploiting an available source of carbon from the atmosphere and in so doing formed protective niches that allowed for other microbial processes to flourish. Furthermore, the presence of acetylene in the atmosphere of a planet or planetoid could possibly represent evidence for an extraterrestrial anaerobic ecosystem. ?? Mary Ann Liebert, Inc.

Acetylene as fast food: implications for development of life on anoxic primordial Earth and in the outer solar system.

Science.gov (United States)

Oremland, Ronald S; Voytek, Mary A

2008-02-01

Acetylene occurs, by photolysis of methane, in the atmospheres of jovian planets and Titan. In contrast, acetylene is only a trace component of Earth's current atmosphere. Nonetheless, a methane-rich atmosphere has been hypothesized for early Earth; this atmosphere would also have been rich in acetylene. This poses a paradox, because acetylene is a potent inhibitor of many key anaerobic microbial processes, including methanogenesis, anaerobic methane oxidation, nitrogen fixation, and hydrogen oxidation. Fermentation of acetylene was discovered approximately 25 years ago, and Pelobacter acetylenicus was shown to grow on acetylene by virtue of acetylene hydratase, which results in the formation of acetaldehyde. Acetaldehyde subsequently dismutates to ethanol and acetate (plus some hydrogen). However, acetylene hydratase is specific for acetylene and does not react with any analogous compounds. We hypothesize that microbes with acetylene hydratase played a key role in the evolution of Earth's early biosphere by exploiting an available source of carbon from the atmosphere and in so doing formed protective niches that allowed for other microbial processes to flourish. Furthermore, the presence of acetylene in the atmosphere of a planet or planetoid could possibly represent evidence for an extraterrestrial anaerobic ecosystem.

In Situ Electrochemical SFG/DFG Study of CN⁻ and Nitrile Adsorption at Au from 1-Butyl-1-methyl-pyrrolidinium Bis(trifluoromethylsulfonyl Amide Ionic Liquid ([BMP][TFSA] Containing 4-{2-[1-(2-Cyanoethyl-1,2,3,4-tetrahydroquinolin-6-yl]diazenyl} Benzonitrile (CTDB and K[Au(CN₂

Directory of Open Access Journals (Sweden)

Benedetto Bozzini

2012-06-01

Full Text Available In this paper we report an in situ electrochemical Sum-/Difference Frequency Generation (SFG/DFG spectroscopy investigation of the adsorption of nitrile and CN⁻ from the ionic liquid 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl amide ([BMP][TFSA] containing 4-{2-[1-(2-cyanoethyl-1,2,3,4-tetrahydroquinolin-6-yl]- diazenyl}benzonitrile (CTDB at Au electrodes in the absence and in the presence of the Au-electrodeposition process from K[Au(CN₂]. The adsorption of nitrile and its coadsorption with CN⁻ resulting either from the cathodic decomposition of the dye or from ligand release from the Au(I cyanocomplex yield potential-dependent single or double SFG bands in the range 2,125–2,140 cm⁻¹, exhibiting Stark tuning values of ca. 3 and 1 cm⁻¹ V⁻¹ in the absence and presence of electrodeposition, respectively. The low Stark tuning found during electrodeposition correlates with the cathodic inhibiting effect of CTDB, giving rise to its levelling properties. The essential insensitivity of the other DFG parameters to the electrodeposition process is due to the growth of smooth Au.

Dynamic dielectric properties and the γ transition of bromine doped polyacrylonitrile

Directory of Open Access Journals (Sweden)

2007-10-01

Full Text Available Based on monitoring the γ process (the lowest temperature-relaxation in polyacrylonitrile (PAN by dynamic dielectric spectroscopy, new evidence for the formation of a charge transfer complex between bromine dopants and nitrile groups is presented. The experimental work is carried out on PAN and nitrile polymerized PAN with and without bromine doping and the effects of these factors on the γ process are measured. Nitrile polymerization results in diminishing of the γ process and in a 15% increase in its activation energy, whereas bromine doping produces splitting of the original γ process in PAN – coupled with a significant activation energy increase – and its complete disappearance in nitrile polymerized PAN. Both the splitting of the γ process and the higher activation energy reflect bromine-nitrile adduct formation..

Measurement of the membrane dipole electric field in DMPC vesicles using vibrational shifts of p-cyanophenylalanine and molecular dynamics simulations.

Science.gov (United States)

Shrestha, Rebika; Cardenas, Alfredo E; Elber, Ron; Webb, Lauren J

2015-02-19

The magnitude of the membrane dipole field was measured using vibrational Stark effect (VSE) shifts of nitrile oscillators placed on the unnatural amino acid p-cyanophenylalanine (p-CN-Phe) added to a peptide sequence at four unique positions. These peptides, which were based on a repeating alanine-leucine motif, intercalated into small unilamellar DMPC vesicles which formed an α-helix as confirmed by circular dichroic (CD) spectroscopy. Molecular dynamics simulations of the membrane-intercalated helix containing two of the nitrile probes, one near the headgroup region of the lipid (αLAX(25)) and one buried in the interior of the bilayer (αLAX(16)), were used to examine the structure of the nitrile with respect to the membrane normal, the assumed direction of the dipole field, by quantifying both a small tilt of the helix in the bilayer and conformational rotation of the p-CN-Phe side chain at steady state. Vibrational absorption energies of the nitrile oscillator at each position showed a systematic blue shift as the nitrile was stepped toward the membrane interior; for several different concentrations of peptide, the absorption energy of the nitrile located in the middle of the bilayer was ∼3 cm(-1) greater than that of the nitrile closest to the surface of the membrane. Taken together, the measured VSE shifts and nitrile orientations within the membrane resulted in an absolute magnitude of 8-11 MV/cm for the dipole field, at the high end of the range of possible values that have been accumulated from a variety of indirect measurements. Implications for this are discussed.

Elastomers for Tracked Vehicles: 1980-1997 Program to Improve Durability of Rubber Tank Pads for Army Tracked Vehicles

Science.gov (United States)

2015-06-01

elastomeric compound coded NBR -12 was developed. This compound was based on a highly saturated nitrile rubber or hydrogenated acrylonitrile-butadiene...at Fort Belvoir, VA, produced a patented rubber formulation ( NBR -12) based on hydrogenated nitrile rubber (HNBR)1,2 with a novel curing and filler...performance vehicles. • Acrylonitrile butadiene or nitrile rubber ( NBR )10: NBR is the generic name given to emulsion polymerized copolymers of

Effect of magnetic and thermal properties of iron oxide nanoparticles (IONs) in nitrile butadiene rubber (NBR) latex

International Nuclear Information System (INIS)

Ong, Hun Tiar; Julkapli, Nurhidayatullaili Muhd; Hamid, Sharifah Bee Abd; Boondamnoen, O.; Tai, Mun Foong

2015-01-01

Nitrile butadiene rubber (NBR) gloves are one of the most important personal protective equipments but they are possible to tear off and contaminate food or pharmaceutical and healthcare products during manufacturing and packaging process. High tendency of torn glove remaining in food or products due to white or light flesh-coloured glove is not easy to be detected by naked eyes. In this paper, iron oxide nanoparticles (IONs) selected as additive for NBR to improve its detectability by mean of magnetic properties. IONs synthesized via precipitation method and compounded with NBR latex before casting on petri dish. The properties of IONs were investigated by X-ray Diffractometry (XRD), Transmission Electron Microscope (TEM), Raman Spectroscopy and Vibrating Sample Magnetometer (VSM). Meanwhile NBR/IONs composites were studied by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Vibrating Sample Magnetometer (VSM). It observed that, synthesized IONs shows of 25.28 nm crystallite with 25.86 nm semipherical (changed as) shape. Meanwhile, Magnetite and maghemite phase are found in range of 670 cm −1 and 700 cm −1 respectively, which it contributes magnetization saturation of 73.96 emu/g at 10,000 G by VSM. Thermal stability and magnetic properties were increased with incorporating IONs into NBR latex up to 20 phr. NBR/IONs 5 phr has the optimum thermal stability, lowest glass transition temperature (−14.83 °C) and acceptable range of magnetization saturation (3.83 emu/g at 10,000 G) to form NBR gloves with magnetic detectability. - Highlights: • We synthesized IONs with high magnetization saturation (M s ). • High M s of IONs were incorporated into NBR latex in order to induce magnetic properties in the NBR composite. • Introduction of IONs into NBR latex would improve thermal properties. • The produced NBR/IONs 5 phr composite exceeded the minimum magnetic moment sensor of the detector. • They have high potential for the

Effect of magnetic and thermal properties of iron oxide nanoparticles (IONs) in nitrile butadiene rubber (NBR) latex

Energy Technology Data Exchange (ETDEWEB)

Ong, Hun Tiar; Julkapli, Nurhidayatullaili Muhd; Hamid, Sharifah Bee Abd, E-mail: sharifahbee@um.edu.my; Boondamnoen, O.; Tai, Mun Foong

2015-12-01

Nitrile butadiene rubber (NBR) gloves are one of the most important personal protective equipments but they are possible to tear off and contaminate food or pharmaceutical and healthcare products during manufacturing and packaging process. High tendency of torn glove remaining in food or products due to white or light flesh-coloured glove is not easy to be detected by naked eyes. In this paper, iron oxide nanoparticles (IONs) selected as additive for NBR to improve its detectability by mean of magnetic properties. IONs synthesized via precipitation method and compounded with NBR latex before casting on petri dish. The properties of IONs were investigated by X-ray Diffractometry (XRD), Transmission Electron Microscope (TEM), Raman Spectroscopy and Vibrating Sample Magnetometer (VSM). Meanwhile NBR/IONs composites were studied by Thermogravimetry Analysis (TGA), Differential Scanning Calorimetry (DSC) and Vibrating Sample Magnetometer (VSM). It observed that, synthesized IONs shows of 25.28 nm crystallite with 25.86 nm semipherical (changed as) shape. Meanwhile, Magnetite and maghemite phase are found in range of 670 cm{sup −1} and 700 cm{sup −1} respectively, which it contributes magnetization saturation of 73.96 emu/g at 10,000 G by VSM. Thermal stability and magnetic properties were increased with incorporating IONs into NBR latex up to 20 phr. NBR/IONs 5 phr has the optimum thermal stability, lowest glass transition temperature (−14.83 °C) and acceptable range of magnetization saturation (3.83 emu/g at 10,000 G) to form NBR gloves with magnetic detectability. - Highlights: • We synthesized IONs with high magnetization saturation (M{sub s}). • High M{sub s} of IONs were incorporated into NBR latex in order to induce magnetic properties in the NBR composite. • Introduction of IONs into NBR latex would improve thermal properties. • The produced NBR/IONs 5 phr composite exceeded the minimum magnetic moment sensor of the detector. • They have high

Solvent induced supramolecular anisotropy in molecular gels

Energy Technology Data Exchange (ETDEWEB)

Rogers, Michael A., E-mail: mroger09@uoguelph.ca [Department of Food Science, University of Guelph, Guelph, Ontario, N3C3X9 (Canada); Corradini, Maria G. [Department of Food Science, University of Massachusetts Amherst, Amherst, MA, 01003 (United States); Emge, Thomas [Department of Chemistry and Biochemistry, Rutgers University, New Brunswick, NJ, 08901 (United States)

2017-06-15

Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

Solvent induced supramolecular anisotropy in molecular gels

International Nuclear Information System (INIS)

Rogers, Michael A.; Corradini, Maria G.; Emge, Thomas

2017-01-01

Herein is the first report of solvent induced anisotropy in 12-hydroxystearic acid self-assembled fibrillar networks. Increasing the chain length of polar solvent, such as nitriles and ketones, tailored the anisotropy of the fibrillar aggregates. 12HSA molecular gels, comprised of alkanes, exhibited an isotropic fibrillar network irrespective of the alkane chain length. In polar solvents, anisotropy, observed using 2D powder x-ray diffraction profiles, is correlated to a fibrillar supramolecular morphologies in long chain nitriles and ketones while sphereulitic crystals are correlated to x-ray diffraction patterns with an isotropic scatter intensity in short chain ketones and nitriles. These changes directly modify the final physical properties of the gels. - Highlights: • 12-HSA self-assembles into crystalline supramolecular morphologies depending on the solvent. • Alkanes, short chain nitriles and ketones led to 12-HSA displaying supramolecular isotropy. • In long chain nitriles and ketones, 12-HSA displays supramolecular anisotropy.

The Effect of Switch-Loading Fuels on Fuel-Wetted Elastomers

Science.gov (United States)

2007-01-10

material and age of the material”. In summing up past experience, the bulletin stated that “the common denominator is expected to be nitrile rubber ...The expert also noted that “most, if not all manufacturers, responded by eliminating nitrile rubber seals and replacing them with fluorocarbon...materials identified as from the Acrylonitrile- 4 Viton is a name trademarked by DuPont Performance Elastomers L.L.C. Butadiene family (nitrile, NBR

Degradation of elastomers by tritium beta radiation

International Nuclear Information System (INIS)

Zapp, P.E.; Tuer, G.L. Jr.

1984-01-01

Based on its tritium radiation resistance, ethylene propylene rubber has been selected as a candidate for replacement of nitrile rubber in the SRP tritium facilities. A specification for flange gasket material has been developed for ethylene propylene such that its mechanical properties are similar to those of nitrile rubber. In-process testing of ethylene propylene and nitrile gaskets will be conducted in the tritium facilities under identical exposure conditions

Multifaceted adsorption of α-cyano-4-hydroxycinnamic acid on silver colloidal and island surfaces

Science.gov (United States)

Jung, Dawoon; Jeon, Kooknam; Yeo, Juhyun; Hussain, Shafqat; Pang, Yoonsoo

2017-12-01

The surface adsorption of organic nitrile compounds on the silver colloidal and island surfaces has been studied using surface-enhanced Raman scattering (SERS). α-Cyano-4-hydroxycinnamic acid (CHCA) with nitrile and carboxyl groups shows various surface adsorption on the silver surfaces. In acidic conditions, the surface adsorption of CHCA via the nitrile group with a more or less tilted geometry to the surface was found. When the solution pH increases, the carboxylate and nitrile groups of deprotonated CHCA participate in the surface adsorption, whereas the molecular plane of CHCA becomes more parallel to the surface. The ν(Ctbnd N) band in SERS of CHCA is the indicator of the surface adsorption geometry. The strongly red-shifted and broadened ν(Ctbnd N) band in SERS represents the surface adsorption via π-electrons of the Ctbnd N bond (side-on geometry; π-coordination). Nitriles adsorbed on the surface via the nonbonding electron pair of the nitrogen atom (end-on geometry; σ-coordination) often cause the blue-shifts and small band broadening in ν(Ctbnd N) in SERS. The surface adsorption geometry of organic nitriles based on many previous experimental results was further confirmed by the surface adsorption of CHCA on the silver island surfaces and dinitrile compounds on the silver colloidal surfaces.

High-performance magnetic poly (arylene ether nitrile) nanocomposites: Co-modification of Fe3O4 via mussel inspired poly(dopamine) and amino functionalized silane KH550

Science.gov (United States)

Wan, Xinyi; Zhan, Yingqing; Long, Zhihang; Zeng, Guangyong; Ren, Yang; He, Yi

2017-12-01

To develop high-performance magnetic polymer composites, we reported a facial mussel-inspired way to functionalize Fe3O4 microspheres with dopamine (DA) and KH550, followed by compounding with poly (arylene ether nitrile) (PEN), to prepare functional nanocomposite films. Such mussel inspired co-modification of Fe3O4 was characterized and confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Therefore, the outstanding properties of the functionalize Fe3O4/polymer composites were obtained. With the addition of 15 wt% functionalized Fe3O4, the saturation magnetization (Ms) and dielectric permittivity of the PEN composites were increased to 12.49 emu/g and 14.3 (250 Hz), respectively, while the low dielectric loss was maintained. In addition, even the high loading content of Fe3O4 was incorporated, the functional PEN composites still exhibited high mechanical properties and thermal stability, including the significant improvement in glass transition temperature, and the same level of the tensile strength compared with neat PEN. Our work revealed that magnetic and dielectric PEN composites materials along with high comprehensive properties may be potentially used in the electromagnetic fields.

Avaliação do processo de cura da borracha nitrílica (NBR pela resina fenólica através do cálculo da constante de cura Evaluation of phenolic resin vulcanization of nitrile rubber (NBR through determination of the cure constant

Directory of Open Access Journals (Sweden)

Ana Maria Furtado

2001-03-01

Full Text Available O processo de cura envolve reações de múltiplos mecanismos e sua investigação pode ser feita por meio de várias técnicas. Este trabalho apresenta a comparação entre dois métodos que utilizam parâmetros reométricos para o cálculo da constante cinética de cura (k relacionada com a cura da borracha nitrílica com a resina fenólica, tendo o policloropreno e o óxido de zinco como sistema ativador. Foi utilizado o planejamento de experimentos fatorial completo (2³ + ponto central como base para a preparação das formulações e análise dos resultados. Os resultados obtidos identificaram a influência da temperatura, da quantidade de cada um dos componentes das formulações e da adequação dos métodos de avaliação para o processo de cura da borracha nitrílica pela resina fenólica.The cure process involves reactions with multiple mechanisms and its investigation can be followed by using different techniques. This work compares two methods in which rheometric parameters are used to calculate the cure rate constant (k, related to the cure of nitrile rubber with phenolic resin and having polychloroprene and zinc oxide as the activators. A complete factorial (2³ + central point experimental design was used as base to prepare the formulations and to analyse the results. The results obtained identified the influence of the temperature, the amount of each component in the formulation and the suitability of the evaluation methods for the cure process of nitrile rubber with phenolic resin.

The Brassica epithionitrile 1-cyano-2,3-epithiopropane triggers cell death in human liver cancer cells in vitro.

Science.gov (United States)

Hanschen, Franziska S; Herz, Corinna; Schlotz, Nina; Kupke, Franziska; Bartolomé Rodríguez, María M; Schreiner, Monika; Rohn, Sascha; Lamy, Evelyn

2015-11-01

Glucosinolates are secondary metabolites present in Brassica vegetables. Alkenyl glucosinolates are enzymatically degraded forming nitriles or isothiocyanates, but in the presence of epithiospecifier protein, epithionitriles are released. However, studies on the occurrence of epithionitriles in Brassica food and knowledge about their biological effects are scarce. Epithionitrile formation from glucosinolates of seven Brassica vegetables was analyzed using GC-MS and HPLC-DAD. Bioactivity of synthetic and plant-derived 1-cyano-2,3-epithiopropane (CETP) - the predominant epithionitrile in Brassica vegetables - in three human hepatocellular carcinoma (HCC) cell lines and primary murine hepatocytes was also evaluated. The majority of the Brassica vegetables were producers of nitriles or epithionitriles as hydrolysis products and not of isothiocyanates. For example, Brussels sprouts and savoy cabbage contained up to 0.8 μmol CETP/g vegetable. Using formazan dye assays, concentrations of 380-1500 nM CETP were observed to inhibit the mitochondrial dehydrogenase activity of human HCC cells without impairment of cell growth. At 100-fold higher CETP concentrations, cell death was observed. Presence of plant matrix increased CETP-based toxicity. These in vitro data provide no indication that epithionitriles will severely affect human health by Brassica consumption. In contrast to isothiocyanates, no evidence of selective toxicity against HCC cells was found. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Optical and Thermal Stability of Oligofluorene/Rubber Luminescent Blend.

Science.gov (United States)

Barbosa, Camila G; Faez, Roselena; Péres, Laura O

2016-09-01

This paper proposes to obtain homogeneous and stable blends of oligo(9,9-dioctylfluorene)-co-phenylene (OF), a conjugated oligomer with strong tendency of formation of excimers in the solid state, and nitrile rubber (NBR). This rubber protection reduces the formation of polymer excimers in the films. The fluorene oligomer was synthesized via Suzuki reaction and incorporated in the nitrile rubber. The films were formed by spin coating and casting techniques on the proportions of 1, 5, 10, 20 and 50 % (w/w) of OF in the nitrile rubber (NBR). The structural, optical and thermal properties of the films were evaluated with infrared, UV-Vis, fluorescence and thermogravimetry, respectively. The nitrile rubber proved to be essential for the preparation of homogeneous and stable films, since it was not possible to obtain films with only fluorene using the above-mentioned techniques. Furthermore, luminescent properties of OF are unchanged and the excimers formation in the solid state decrease suggesting the efficiency of nitrile rubber as the matrix for making films.

Photochemical reduction of uranyl ion by acetonitrile and propionitrile

International Nuclear Information System (INIS)

Brar, A.S.; Chander, R.; Sandhu, S.S.

1979-01-01

The photochemical reduction of uranyl ion by acetonitrile, propionitrile, benzonitrile, phenylacetonitrile, cyanoacetic acid and malononitrile in aqueous or aq. acetone medium using radiations >= 400 nm from a medium pressure mercury vapour lamp has been investigated. Except acetonitrile and propionitrile all other nitriles fail to bring about the reduction of uranyl ion. The reduction with aceto- and propionitriles has been found to obey pseudo-first order kinetics. The magnitude of rate of reduction with propionitrile is higher than that with acetonitrile. The pseudo-first order rate constants and quenching constant have been calculated from the kinetic data. It has been found that physical and chemical quenching compete with each other. The plot of reciprocal of quantum yield versus reciprocal (nitrile) is linear with a small intercept on the ordinate axis. Absorption spectra of uranyl ion in pure water, in the presence of acid and in the presence of acid+nitrile reveal that there is no ground state interaction between uranyl ion and the nitrile. A mechanism of photochemical reduction of uranyl ion based on α-hydrogen abstraction from the nitrile has been proposed. (auth.)

Tensile Properties and Integrity of Clean Room and Low-Modulus Disposable Nitrile Gloves: A Comparison of Two Dissimilar Glove Types

Science.gov (United States)

Phalen, Robert N.; Wong, Weng kee

2012-01-01

Background: The selection of disposable nitrile exam gloves is complicated by (i) the availability of several types or formulations, (ii) product variability, and (iii) an inability of common quality control tests to detect small holes in the fingers. Differences in polymer formulation (e.g. filler and plasticizer/oil content) and tensile properties are expected to account for much of the observed variability in performance. Objectives: This study evaluated the tensile properties and integrity (leak failure rates) of two glove choices assumed to contain different amounts of plasticizers/oils. The primary aims were to determine if the tensile properties and integrity differed and if associations existed among these factors. Additional physical and chemical properties were evaluated. Methods: Six clean room and five low-modulus products were evaluated using the American Society for Testing and Materials Method D412 and a modified water-leak test to detect holes capable of passing a virus or chemical agent. Results: Significant differences in the leak failure rates and tensile properties existed between the two glove types (P ≤ 0.05). The clean room gloves were about three times more likely to have leak failures (chi-square; P = 0.001). No correlation was observed between leak failures and tensile properties. Solvent extract, an indication of added plasticizer/oil, was not associated with leak failures. However, gloves with a maximum modulus gloves were a better choice for protection against aqueous chemical or biological penetration. The observed variability between glove products indicated that glove selection cannot rely solely on glove type or manufacturer labeling. Measures of modulus and AD may aid in the selection process, in contrast with common measures of tensile strength and elongation at break. PMID:22201179

Synthesis of some 16,17-secoandrost-5-ene derivatives

Directory of Open Access Journals (Sweden)

Gaković Andrea R.

2010-01-01

Full Text Available Starting from 3β-acetoxy-17-oxo-16,17-secoandrost-5-ene-16-nitrile (1, 3β-acetoxy-16,17-secoandrost-5-ene-16-nitrile (4 was synthesized by a three-stage procedure. First, the formyl group of compound 1 was reduced, to yield the alcohol 2. Compound 2 was further transformed to the mesyloxy derivative 3, whose reduction with NaBH3CN gave compound 4. Apart from compound 4 as the main reaction product, two additional products were obtained, for which the GC/MS analysis suggested that they are 8(14 and 14 derivatives of compound 4. Compound 4 was transformed into 3β-hydroxy-16,17-sesoandrost-5-ene-16-nitrile (7, the Oppenauer oxidation of which afforded 3-oxo-16,17-secoandrost-4-ene-16-nitrile (8.

Spectral behavior and photophysical parameters of (2Z)-3-[4-(dimethylamino) phenyl]-2-(4-fluorophenyl) prop-2-ene-nitrile (DPF) in different media

Energy Technology Data Exchange (ETDEWEB)

Pannipara, Mehboobali [Department of Chemistry, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Asiri, Abdullah M. [Department of Chemistry, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah 21589, P.O. Box 80203 (Saudi Arabia); Alamry, Khalid A. [Department of Chemistry, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Salem, Ibrahim A. [Department of Chemistry, Faculty of Science, Tanta University, 31527 Tanta (Egypt); El-Daly, Samy A., E-mail: samyeldaly@yahoo.com [Department of Chemistry, Faculty of Science, King Abdulaziz University, P.O. Box 80203, Jeddah 21589 (Saudi Arabia); Department of Chemistry, Faculty of Science, Tanta University, 31527 Tanta (Egypt)

2015-01-15

A new fluorophore, (2Z)-3-[4-(dimethylamino) phenyl]-2-(4-fluorophenyl) prop-2-ene-nitrile (DPF), was synthesized by knoevenagel condensation of 4-(dimethylamino) benzaldehyde and 4-fluorobenzyl cyanide in ethanol using NaOH as base. The electronic absorption and emission characteristic of DPF were studied in different solvents. The X-ray crystallographic structure of DPF was also investigated. DPF exhibits a red-shift in its emission spectrum as solvent polarity increases, indicating a large change in the dipole moment of dye molecule upon excitation due to intramolecular charge transfer in excited DPF{sup ⁎}. The fluorescence quantum yield depends strongly on the properties of the solvents, which was attributed to positive and negative solvatokinetic effects. A crystalline solid of DPF gives a strong yellow emission at about 532 nm; these phenomena are important for the application of DPF dye in organic photoemitting diode. The photochemical quantum yield of cis–trans isomerization of DPF was also determined in different solvents. The DPF dye displays solubilization in both cationic (CTAB) and anionic (SDS) micelle and may be used as a probe to determine the critical micelle concentration (CMC) of SDS and CTAB. - Highlights: • Organic pi conjugated molecule with a donor acceptor group was studied. • Crystalline solid of the molecule shows strong and intense yellow emission. • The dye displays solubilization in cationic micelle with abrupt change in emission intensity at CMC. • This work gives an insight into the application of organic luminescent material in various fields.

Nitrilase-catalysed conversion of acrylonitrile by free and ...

Indian Academy of Sciences (India)

Prakash

microorganisms directly to carboxylic acids and ammonia using a nitrilase or nitrile ... and enzymatic detoxification of nitrile-based herbicides,and ... Materials and methods. 2.1 Growth ... determined by a UV detector at a wavelength of 210 nm.

Nitrilase from rhodococcus rhodochrous ATCC BAA-870: fibre formation over time

CSIR Research Space (South Africa)

Frederick, J

2008-07-01

Full Text Available of a nitrile into its corresponding carboxylic acid and ammonia, and have become important industrial enzymes as a result of the products they afford. Successful commercial examples of nitrile bioconversion include production of nicotinic acid...

Beckmann rearrangement of aldoximes catalyzed by transition metal salts: mechanical aspects

NARCIS (Netherlands)

Leusink, A.J.; Meerbeek, T.G.; Noltes, J.G.

1977-01-01

The Beckmann rearrangement of aldoximes catalyzed by transition metal salts like palladium and nickel acetylacetonates is shown to be a dehydration‐hydration reaction in which the anti‐oxime is converted into nitrile and the nitrile is converted into amide.

40 CFR 721.4568 - Methylpolychloro aliphatic ketone.

Science.gov (United States)

2010-07-01

... the terms of this rule. Nitrile gloves with a minimum thickness of 0.61 mm also satisfy the terms of... duration of exposure is longer than 2 h, nitrile gloves shall be discarded and replaced every 2 h. Unless...

Genetics Home Reference: fumarase deficiency

Science.gov (United States)

... V, Tomlinson IP. The FH mutation database: an online database of fumarate hydratase mutations involved in the MCUL (HLRCC) tumor syndrome and congenital fumarase deficiency. BMC Med Genet. 2008 Mar 25;9:20. doi: 10.1186/1471-2350- ...

Carbon-14 labelled nitrogen heterocycles; the syntheses of three phosphodiesterase inhibitors

International Nuclear Information System (INIS)

Lawrie, K.W.M.; Novelli, C.E.A.; Saunders, David

1995-01-01

The syntheses of three heterocyclic phosphodiesterase inhibitors are described from a common radiolabelled precursor, namely 2-propoxybenzo[cyano- 14 C] nitrile. Conversion of the nitrile to the corresponding methyl ketone or amidine allows elaboration of the heterocycles radiolabelled within the ring systems. (Author)

Modelling non-redox enzymes: Anaerobic and aerobic acetylene ...

Indian Academy of Sciences (India)

Administrator

Modelling non-redox enzymes: Anaerobic and aerobic acetylene hydratase. SABYASACHI SARKAR. Department of Chemistry, Indian Institute of Technology, Kanpur 208 016,. India. Acetaldehyde is the first metabolite produced during acetylene degradation by bacteria either aerobically or anaerobically. Conversion of ...

40 CFR Table 5 to Subpart U of... - Known Organic HAP Emitted From the Production of Elastomer Products

Science.gov (United States)

2010-07-01

... Rubber. EPI = Epichlorohydrin Rubber. EPR = Ethylene Propylene Rubber. HBR = Halobutyl Rubber. HYP = Hypalon TM. NEO = Neoprene. NBL = Nitrile Butadiene Latex. NBR = Nitrile Butadiene Rubber. PBR/SBRS... products] Organic HAP/chemical name (CAS No.) Elastomer product/subcategory BR EPI EPR HBR HYP NEO NBL NBR...

Straightforward synthesis of a triazine-based porous carbon with high gas-uptake capacities

DEFF Research Database (Denmark)

Hu, Xinming; Chen, Qi; Zhao, Yan Chao

2014-01-01

A triazine-based porous carbon material (TPC-1) was prepared directly from a fluorinated aromatic nitrile in molten zinc chloride. Trimerization of the nitrile and subsequent defluorination carbonization of the polymeric network result in the formation of TPC-1. The defluorination process is reve...

Carbon-14 labelled nitrogen heterocycles; the syntheses of three phosphodiesterase inhibitors

Energy Technology Data Exchange (ETDEWEB)

Lawrie, K.W.M.; Novelli, C.E.A.; Saunders, David [SmithKline Beecham Pharmaceuticals Research and Development, Harlow (United Kingdom). Synthetic Isotope Chemistry Dept.; Coates, W.J. [SmithKline Beecham Pharmaceuticals Research and Development, Welwyn (United Kingdom)

1995-09-01

The syntheses of three heterocyclic phosphodiesterase inhibitors are described from a common radiolabelled precursor, namely 2-propoxybenzo[cyano-{sup 14}C] nitrile. Conversion of the nitrile to the corresponding methyl ketone or amidine allows elaboration of the heterocycles radiolabelled within the ring systems. (Author).

Isolation, identification, and culture optimization of a novel glycinonitrile-hydrolyzing fungus-Fusarium oxysporum H3.

Science.gov (United States)

Gong, Jin-Song; Lu, Zhen-Ming; Shi, Jing-Song; Dou, Wen-Fang; Xu, Hong-Yu; Zhou, Zhe-Min; Xu, Zheng-Hong

2011-10-01

Microbial transformation of glycinonitrile into glycine by nitrile hydrolase is of considerable interest to green chemistry. A novel fungus with high nitrile hydrolase was newly isolated from soil samples and identified as Fusarium oxysporum H3 through 18S ribosomal DNA, 28S ribosomal DNA, and the internal transcribed spacer sequence analysis, together with morphology characteristics. After primary optimization of culture conditions including pH, temperature, carbon/nitrogen sources, inducers, and metal ions, the enzyme activity was greatly increased from 326 to 4,313 U/L. The preferred carbon/nitrogen sources, inducer, and metal ions were glucose and yeast extract, caprolactam, and Cu(2+), Mn(2+), and Fe(2+), respectively. The maximum enzyme formation was obtained when F. oxysporum H3 was cultivated at 30 °C for 54 h with the initial pH of 7.2. There is scanty report about the optimization of nitrile hydrolase production from nitrile-converting fungus.

3-Methylglutaconic aciduria-lessons from 50 genes and 977 patients

NARCIS (Netherlands)

Wortmann, S.B.; Kluijtmans, L.A.J.; Rodenburg, R.J.T.; Sass, J.O.; Nouws, J.; Kaauwen, E.P. van; Kleefstra, T.; Tranebjaerg, L.; Vries, M.C. de; Isohanni, P.; Walter, K.; Alkuraya, F.S.; Smuts, I.; Reinecke, C.J.; Westhuizen, F.H. van der; Thorburn, D.; Smeitink, J.A.M.; Morava, E.; Wevers, R.A.

2013-01-01

Elevated urinary excretion of 3-methylglutaconic acid is considered rare in patients suspected of a metabolic disorder. In 3-methylglutaconyl-CoA hydratase deficiency (mutations in AUH), it derives from leucine degradation. In all other disorders with 3-methylglutaconic aciduria the origin is

Hereditary leiomyomatosis and renal cell cancer presenting as metastatic kidney cancer at 18 years of age : implications for surveillance

NARCIS (Netherlands)

van Spaendonck-Zwarts, Karin Y.; Badeloe, Sadhanna; Oosting, Sjoukje F.; Hovenga, Sjoerd; Semmelink, Harry J. F.; van Moorselaar, R. Jeroen A.; van Waesberghe, Jan Hein; Mensenkamp, Arjen R.; Menko, Fred H.

Hereditary leiomyomatosis and renal cell cancer (HLRCC) is an autosomal dominant syndrome characterized by skin piloleiomyomas, uterine leiomyomas and papillary type 2 renal cancer caused by germline mutations in the fumarate hydratase (FH) gene. Previously, we proposed renal imaging for FH mutation

Toward an improved definition of the genetic and tumor spectrum associated with SDH germ-line mutations

NARCIS (Netherlands)

Evenepoel, Lucie; Papathomas, Thomas G.; Krol, Niels; Korpershoek, Esther; De Krijger, Ronald R.; Persu, Alexandre; Dinjens, Winand N M

2015-01-01

The tricarboxylic acid, or Krebs, cycle is central to the cellular metabolism of sugars, lipids, and amino acids; it fuels the mitochondrial respiratory chain for energy generation. In the past decade, mutations in the Krebs-cycle enzymes succinate dehydrogenase, fumarate hydratase, and isocitrate

Types and properties of elastomer materials used in CANDU reactor

Energy Technology Data Exchange (ETDEWEB)

You, Ho Sik; Jeong, Jin Kon [Korea Atomic Energy Research Institute, Daeduk (Korea, Republic of)

1996-05-01

Properties and kinds of elastomer materials used in a CANDU power plant have been described. The elastomer materials have been used as a sealing material in the components f nuclear power plant since they have many excellent properties that can not be seen in other materials. It is very important to select proper elastomer materials used in the nuclear power plant are required to have resistance to temperature as well as radiation. According to the experimental results performed at some laboratories including the Chalk River Laboratory of AECL, elastomer materials with high resistance to temperature and radiation are Nitrile, Ethylene, Propylene and Butyl. These materials have been used in a lot of components of Wolsong unit 1 and Wolsong 2, 3 and 4 which are under elastomer material. Therefore, the studies on the standardization are currently under way to limit about 10 different kinds of elastomer materials to be used in the plant. 16 tabs., 1 fig., 12 refs. (Author) .new.

Functional characterization of the role of rpfA in Xylella fastidiosa

Science.gov (United States)

Xylella fastidiosa coordinates virulence in grapevines via quorum sensing signal molecules that are regulated and synthesized by the rpf gene cluster (regulation of pathogenicity factors). rpfA encodes aconitate hydratase and could play a regulator role involved in virulence. To elucidate the role o...

3-Methylglutaconic aciduria—lessons from 50 genes and 977 patients

DEFF Research Database (Denmark)

Wortmann, Saskia B; Kluijtmans, Leo A J; Rodenburg, Richard J

2013-01-01

Elevated urinary excretion of 3-methylglutaconic acid is considered rare in patients suspected of a metabolic disorder. In 3-methylglutaconyl-CoA hydratase deficiency (mutations in AUH), it derives from leucine degradation. In all other disorders with 3-methylglutaconic aciduria the origin is unk...

A high-throughput screening method for determining the substrate scope of nitrilases.

Science.gov (United States)

Black, Gary W; Brown, Nicola L; Perry, Justin J B; Randall, P David; Turnbull, Graeme; Zhang, Meng

2015-02-14

Nitrile compounds are intermediates in the synthesis of pharmaceuticals such as atorvastatin. We have developed a chromogenic reagent to screen for nitrilase activity as an alternative to Nessler's reagent. It produces a semi-quantifiable blue colour and hydrolysis of 38 nitrile substrates by 23 nitrilases as cell-free extracts has been shown.

Plant host finding by parasitic plants: a new perspective on plant to plant communication.

Science.gov (United States)

Mescher, Mark C; Runyon, Justin B; De Moraes, Consuelo M

2006-11-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-documented examples of plant-to-plant communication via volatiles, and the ecological significance of such interactions has been much debated. To date, nearly all studies of volatile-mediated interactions among plant species have focused on the reception of herbivore-induced volatiles by neighboring plants. We recently documented volatile effects in another system, demonstrating that the parasitic plant Cuscuta pentagona uses volatile cues to locate its hosts. This finding may broaden the discussion regarding plant-to-plant communication, and suggests that new classes of volatile-meditated interactions among plant species await discovery.

Dicty_cDB: VFO725 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available phosphopyruvate hydratase (EC 4.2.1.11) - liver f... 264 1e-69 AM279157_1( AM279157 |pid:none) Echinostoma capron...i mRNA for enola... 254 9e-67 DQ869009_1( DQ869009 |pid:none) Echinostoma caproni enolase mRNA, ... 25

Genetic manipulation of carotenoid biosynthesis in the green sulfur bacterium Chlorobium tepidum

DEFF Research Database (Denmark)

Frigaard, Niels-Ulrik; Maresca, Julia A; Yunker, Colleen E

2004-01-01

The green sulfur bacterium Chlorobium tepidum is a strict anaerobe and an obligate photoautotroph. On the basis of sequence similarity with known enzymes or sequence motifs, nine open reading frames encoding putative enzymes of carotenoid biosynthesis were identified in the genome sequence of C....... tepidum, and all nine genes were inactivated. Analysis of the carotenoid composition in the resulting mutants allowed the genes encoding the following six enzymes to be identified: phytoene synthase (crtB/CT1386), phytoene desaturase (crtP/CT0807), zeta-carotene desaturase (crtQ/CT1414), gamma......-carotene desaturase (crtU/CT0323), carotenoid 1',2'-hydratase (crtC/CT0301), and carotenoid cis-trans isomerase (crtH/CT0649). Three mutants (CT0180, CT1357, and CT1416 mutants) did not exhibit a discernible phenotype. The carotenoid biosynthetic pathway in C. tepidum is similar to that in cyanobacteria and plants...

Absorption, Translocation and Metabolism of {sup 14}C-Labelled Dichlobenil

Energy Technology Data Exchange (ETDEWEB)

Pate, D. A.; Funderburk, Jr., H. H. [Auburn University Agricultural Experiment Station, Auburn, AL (United States)

1966-05-15

Autoradiographs of bean (Phaseolus vulgaris L.) and alligatorweed (Alternanthera philoxeroides (Mart.) Griseb.) indicated that {sup 14}C-nitrile-labelled dichlobenil (2,6-dichlorobenzonitrile) was slightly absorbed by the leaf and some translocation occurred following foliar application. Plants with roots submersed in radioactive aqueous solution absorbed and translocated the {sup 14}C throughout the plant. An investigation of some of the chemical and physical properties of {sup 14}C-nitrile-labelled dichlobenil was conducted. Loss because of volatilization from counting planchets was considerably reduced by application of acrylic plastic immediately after the solution dried. The plastic coating also eliminated contamination of counting chambers and windows. Two higher plants (bean and alligatorweed ) and four fungi (Fusarium sp., Geotrichum sp., Penicillium sp., Trichoderma sp.) were selected for metabolism studies. Dichlobenil- {sup 14}C was added to Hoagland and Arnon's nutrient solution containing beans or alligatorweed and to liquid cultures containing the other organisms for 12 to 120 h. Extracts from the plants or fungi were chromatographed on silica gel thin-layers. Autoradiographs of the thin-layer chromatographed aqueous extracts revealed a {sup C}-labelled compound of Rf 0.25 that differed from that of dichlobenil, which was 0.6. After esterification of the extracts, a {sup 14}C-labelled compound was observed at Rf 0.95 on thin-layer chromatograms. Chromatography of the unaltered extracts with 2,6- dichlorobenzoic acid revealed identical Rf-values. The esterified aqueous extracts chromatographed precisely with methyl-2,6-dichlorobenzoate. Gas chromatography of the {sup 14}C-labelled compound with an Rf of 0.95 exhibited a retention time identical to that of methyl-2,6-dichlorobenzoate. The quantity of {sup 14}C-labelled compound that chromatographed as 2,6-dichlorobenzoate increased with time of exposure of the various test organisms to dichlobenil {sup

Thermal aromatic Claisen rearrangement and Strecker reaction of alkyl(allyl-aryl ethers under green reaction conditions: Efficient and clean preparation of ortho-allyl phenols (naphthols and alkyl(allyloxyarene-based γ-amino nitriles

Directory of Open Access Journals (Sweden)

Kheila N. Silgado-Gómez

2017-11-01

Full Text Available Chemical transformations of 13 diverse allyl(alkyl-aryl ethers, easily prepared using Williamson reaction of different hydroxyarenes and allyl bromide and alkyl (n-butyl, n-octyl bromides, were studied. Thermal aromatic Claisen rearrangement of allyl-aryl ethers to obtain ortho-allyl phenols (naphthols employing propylene carbonate as a nontoxic and biodegradable solvent was described for the first time. The use of this green solvent allowed to enhance notably product yields and reduce significantly the reaction time comparing with the use of 1,2-dichlorobenzene, toxic solvent, which is traditionally employed in this type of Claisen rearrangement. Three-component Strecker reaction of selected alkyl(allyl-aryl ethers with formyl function on aryl fragment and, piperidine and potassium cyanide in the presence of sulfuric acid supported on silica gel (SSA, SiO2-O-SO3H under mild reaction conditions was used in the preparation of new γ-amino nitriles, analogues of alkaloid girgensohnine [2-(4-hydroxyphenyl-2-(piperidin-1-ylacetonitrile], a perspective biological model in the search for new insecticidal agrochemicals against Aedes aegypti. The use of SSA, an inexpensive and reusable solid catalyst, allowed to obtain new series of 2-[4-alkyl(allyloxyphenyl]-2-(piperidin-1-ylacetonitriles in short time at room temperature with good yields.

Plant Host Finding by Parasitic Plants: A New Perspective on Plant to Plant Communication

OpenAIRE

Mescher, Mark C; Runyon, Justin B; De Moraes, Consuelo M

2006-01-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-documented examples of plant-to-plant communication via volatiles, and the ecological significance of such interactions has been much d...

Nickel-Catalyzed C–CN Bond Formation via Decarbonylative Cyanation of Esters, Amides, and Intramolecular Recombination Fragment Coupling of Acyl Cyanides

KAUST Repository

Chatupheeraphat, Adisak; Liao, Hsuan-Hung; Lee, Shao-Chi; Rueping, Magnus

2017-01-01

An efficient nickel-catalyzed decarbonylative cyanation reaction which allows the direct functional-group interconversion of readily available esters into the corresponding nitriles was developed. This reaction successfully offers access to structurally diverse nitriles with high efficiency and excellent functional-group tolerance and provides a good alternative to classical synthetic pathways from diazonium salts or organic halide compounds.

Characterizations In Studying The Effect Of Acid Reagent Of The ...

African Journals Online (AJOL)

There are two major steps in the synthesis of pleasant fragrant α- and β- campholene nitriles from camphor. The first is the reaction of hydroxylamine with camphor to give the camphoroxime, which rearranges in the presence of acid during the second step to give eitherα- or β- or both αβ- campholene nitriles. The nature of ...

Base induced chemical conversion of 3-carbamoyl-2-isoxazolines.

Science.gov (United States)

Nishiwaki, Nagatoshi; Maki, Asaka; Ariga, Masahiro

2009-01-01

3-Carbamoyl-2-isoxazolines, prepared by cycloaddition of functionalized nitrile oxide, serve as masked 3-unsubstituted isoxazolines to afford 2-isoxazoline-3-carboxylic acid, beta-cyanoalcohol, alpha,beta-unsaturated nitrile, and alpha,beta-unsaturated amide upon heating in the alkaline solution. The present reaction is also applicable to synthesis of 3,4-difunctionalized isoxazoles and beta-hydroxy-gamma-lactone.

Nickel-Catalyzed C–CN Bond Formation via Decarbonylative Cyanation of Esters, Amides, and Intramolecular Recombination Fragment Coupling of Acyl Cyanides

KAUST Repository

Chatupheeraphat, Adisak

2017-08-07

An efficient nickel-catalyzed decarbonylative cyanation reaction which allows the direct functional-group interconversion of readily available esters into the corresponding nitriles was developed. This reaction successfully offers access to structurally diverse nitriles with high efficiency and excellent functional-group tolerance and provides a good alternative to classical synthetic pathways from diazonium salts or organic halide compounds.

Fine mapping of the uterine leiomyoma locus on 1q43 close to a lncRNA in the RGS7-FH interval

NARCIS (Netherlands)

Aissani, B.; Zhang, K.; Mensenkamp, A.R.; Menko, F.H.; Wiener, H.W.

2015-01-01

Mutations in fumarate hydratase (FH) on chromosome 1q43 cause a rare cancer syndrome, hereditary leiomyomatosis and renal cell cancer (HLRCC), but are rare in nonsyndromic and common uterine leiomyoma (UL) or fibroids. Studies suggested that variants in FH or in a linked gene may also predispose to

A Comparative Study of Nitrilases Identified by Genome Mining

Czech Academy of Sciences Publication Activity Database

Kaplan, Ondřej; Veselá, Alicja Barbara; Petříčková, Alena; Pasquarelli, F.; Pičmanová, Martina; Rinágelová, Anna; Bhalla, T. C.; Pátek, Miroslav; Martínková, Ludmila

2013-01-01

Roč. 54, č. 3 (2013), s. 996-1003 ISSN 1073-6085 R&D Projects: GA ČR(CZ) GAP504/11/0394; GA TA ČR TA01021368 Institutional support: RVO:61388971 Keywords : Nitrilase * Arylacetonitrilase * Cyanide hydratase Subject RIV: CE - Biochemistry Impact factor: 2.275, year: 2013

Plant host finding by parasitic plants: A new perspective on plant to plant communication

Science.gov (United States)

Mark C. Mescher; Justin B. Runyon; Consuelo M. De Moraes

2006-01-01

Plants release airborne chemicals that can convey ecologically relevant information to other organisms. These plant volatiles are known to mediate a large array of, often complex, interactions between plants and insects. It has been suggested that plant volatiles may have similar importance in mediating interactions among plant species, but there are few well-...

GenBank blastx search result: AK287540 [KOME

Lifescience Database Archive (English)

Full Text Available AK287540 J065011K01 AF013216.1 AF013216 Myxococcus xanthus Dog (dog), isocitrate lyase (icl), Mls (mls), Ufo... (ufo), fumarate hydratase (fhy), and proteosome major subunit (clpP) genes, complete cds; and acyl-CoA oxidase (aco) gene, partial cds. BCT 0.0 0 ...

GenBank blastx search result: AK243510 [KOME

Lifescience Database Archive (English)

Full Text Available AK243510 J100075B22 AF013216.1 AF013216 Myxococcus xanthus Dog (dog), isocitrate lyase (icl), Mls (mls), Ufo... (ufo), fumarate hydratase (fhy), and proteosome major subunit (clpP) genes, complete cds; and acyl-CoA oxidase (aco) gene, partial cds. BCT 2e-87 1 ...

GenBank blastx search result: AK243527 [KOME

Lifescience Database Archive (English)

Full Text Available AK243527 J100075P16 AF013216.1 AF013216 Myxococcus xanthus Dog (dog), isocitrate lyase (icl), Mls (mls), Ufo... (ufo), fumarate hydratase (fhy), and proteosome major subunit (clpP) genes, complete cds; and acyl-CoA oxidase (aco) gene, partial cds. BCT 1e-143 1 ...

GenBank blastx search result: AK241214 [KOME

Lifescience Database Archive (English)

Full Text Available AK241214 J065122P06 AF013216.1 AF013216 Myxococcus xanthus Dog (dog), isocitrate lyase (icl), Mls (mls), Ufo... (ufo), fumarate hydratase (fhy), and proteosome major subunit (clpP) genes, complete cds; and acyl-CoA oxidase (aco) gene, partial cds. BCT 1e-151 1 ...

1861-IJBCS-Article-Hamidu usman

African Journals Online (AJOL)

hp

diagnostic peak for glucose at 4.571 ppm, a series of doublet-like signals centered at. 3.336, 3.394, 3.287 .... spectrum is a diagnostic tool that is expected to reveal strong nitrile absorption as a result of significant ... with a C=C stretching vibrations at 1620 cm-1. (Eudea et al., 1983). The nitrile group is a reliable functional ...

Selectivity switch for nitrogen functionalization of styrene on Au(1 1 1)

Science.gov (United States)

Deng, Xingyi; Friend, Cynthia M.

2008-03-01

Functionalization of styrene to form N-containing hydrocarbons, e.g. 2-phenylaziridine, benzonitrile, and benzyl nitrile, is achieved by reaction with adsorbed NH a and N a on Au(1 1 1). Electron-induced decomposition of condensed NH 3 was used to produce NH a, N a and H a on Au(1 1 1) at 110 K. The selectivity of the reactions is strongly dependent on the relative concentrations of the surface species. The addition of NH to styrene results in the production of 2-phenylaziridine, whereas adsorbed N and H atoms lead to the formation of nitriles benzonitrile and benzyl nitrile and, respectively, ethylbenzene. This work clearly establishes the utility of Au for promoting functionalization of olefins with nitrogen.

Plant stress signalling: understanding and exploiting plant-plant interactions.

Science.gov (United States)

Pickett, J A; Rasmussen, H B; Woodcock, C M; Matthes, M; Napier, J A

2003-02-01

When plants are attacked by insects, volatile chemical signals can be released, not only from the damaged parts, but also systemically from other parts of the plant and this continues after cessation of feeding by the insect. These signals are perceived by olfactory sensory mechanisms in both the herbivorous insects and their parasites. Molecular structures involved can be characterized by means of electrophysiological assays, using the insect sensory system linked to chemical analysis. Evidence is mounting that such signals can also affect neighbouring intact plants, which initiate defence by the induction of further signalling systems, such as those that increase parasitoid foraging. Furthermore, insect electrophysiology can be used in the identification of plant compounds having effects on the plants themselves. It has been found recently that certain plants can release stress signals even when undamaged, and that these can cause defence responses in intact plants. These discoveries provide the basis for new crop protection strategies, that are either delivered by genetic modification of plants or by conventionally produced plants to which the signal is externally applied. Delivery can also be made by means of mixed seed strategies in which the provoking and recipient plants are grown together. Related signalling discoveries within the rhizosphere seem set to extend these approaches into new ways of controlling weeds, by exploiting the elusive potential of allelopathy, but through signalling rather than by direct physiological effects.

GenBank blastn search result: AK241214 [KOME

Lifescience Database Archive (English)

Full Text Available AK241214 J065122P06 AF013216.1 AF013216 Myxococcus xanthus Dog (dog), isocitrate lyase (icl), Mls (mls), Ufo... (ufo), fumarate hydratase (fhy), and proteosome major subunit (clpP) genes, complete cds; and acyl-CoA oxidase (aco) gene, partial cds. BCT 8e-18 1 -1 ...

Causes and Control of Corrosion in Buried-Conduit Heat Distribution Systems

Science.gov (United States)

1991-07-01

product. Where service conditions are less stringent, isolating gaskets fabricated from nitrile butadicne (Buna- N) rubber ( NBR ) have been extensively...Colt Industries, Inc., July 1986). Used by permission. Compressed nonasbestos product, nitrile butadiene (Buna-N) rubber ( NBR ) binder and aramid-group... rubber , and foamed plastics such as polyurethanic anld phenolic) nominally contain 10 to 500 ppmn soluble chloide.’ Further, insulation can also become

Plant-soil feedbacks: role of plant functional group and plant traits

NARCIS (Netherlands)

Cortois, R.; Schröder-Georgi, T.; Weigelt, A.; van der Putten, W.H.; De Deyn, G.B.

2016-01-01

Plant-soil feedback (PSF), plant trait and functional group concepts advanced our understanding of plant community dynamics, but how they are interlinked is poorly known. To test how plant functional groups (FGs: graminoids, small herbs, tall herbs, legumes) and plant traits relate to PSF, we grew

LNG plant combined with power plant

Energy Technology Data Exchange (ETDEWEB)

Aoki, I; Kikkawa, Y [Chiyoda Chemical Engineering and Construction Co. Ltd., Tokyo (Japan)

1997-06-01

The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs.

LNG plant combined with power plant

International Nuclear Information System (INIS)

Aoki, I.; Kikkawa, Y.

1997-01-01

The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs

Elastomers for Service as Seals for Engine Lubricants and Hydraulic Fluids

Science.gov (United States)

1976-02-01

mm NBR PNF psi - fluorocarbon rubber - hour per degrees Fahrenheit - inch-pound per cubic inch - minute per degrees Fahrenheit - milliliter...millimeter - nitrile-butadiene rubber - polyffluoroalkoxy)phosphazene - pounds per square inch t I (1 MAT-75-78 <V ■ >«..*, njf:~-. I...I I I I I I r i. L I I 1 ! «WJBDXNB PA« BUNUfOT FIIMID BACKGROUND Nitrile-butadiene robber ( NBR ) O-nngs have had an accept

Analysis of a Compressible Fluid Soft Recoil (CFSR) Concept Applied to a 155 MM Howitzer

Science.gov (United States)

1979-03-01

Nitrile or Buna-N ( NBR ) rubber with ’ backup rings of nylotron. HITRILE NVLOTRON Piston seals An unresolved problem is that the coefficient of...fluid at atmospheric pressure Poisson’s ratio for Nitrile rubber dynamic coefficient of friction for rubber mass of recoiling parts weight of...Greene, tweed 5 Co. Palmetto catalog.) 43 [i^ - 0.50 = coefficient of friction (An approximate figure for rubber supplied by RIA Rubber

Green and selective synthesis of N-substituted amides using water soluble porphyrazinato copper(II) catalyst

International Nuclear Information System (INIS)

Ghodsinia, Sara S.E.; Akhlaghinia, Batool; Eshghi, Hossein; Safaei, Elham

2013-01-01

N, N',N , N ' -Tetramethyl tetra-2,3-pyridinoporphyrazinato copper(II) methyl sulfate ([Cu(2,3-tmtppa)](MeSO 4 ) 4 ) efficiently catalyzed the direct conversion of nitriles to N-substituted amides. The one pot selective synthesis of the N-substituted amides from nitriles and primary amines was performed in refluxing H 2 O. The catalyst was recovered and reused at least four times, maintaining its efficiency. (author)